Flexible lithium-ion planer thin-film battery

KAUST Repository

Kutbee, Arwa T.

2016-02-03

Commercialization of wearable electronics requires miniaturized, flexible power sources. Lithium ion battery is a strong candidate as the next generation high performance flexible battery. The development of flexible materials for battery electrodes suffers from the limited material choices. In this work, we present a flexible inorganic lithium-ion battery with no restrictions on the materials used. The battery showed an enhanced normalized capacity of 146 ??Ah/cm2.

Flexible lithium-ion planer thin-film battery

KAUST Repository

Kutbee, Arwa T.; Ghoneim, Mohamed T.; Hussain, Muhammad Mustafa

2016-01-01

Commercialization of wearable electronics requires miniaturized, flexible power sources. Lithium ion battery is a strong candidate as the next generation high performance flexible battery. The development of flexible materials for battery electrodes

Performance Evaluation Test of the Nemesis M3

National Research Council Canada - National Science Library

2008-01-01

... an area where heavy vegetation cutting had occurred, and the use of an off-the-shelf pavement cold planer to potentially engage and destroy antipersonnel land mines buried to a depth of 15 cm (6 inches...

Uddannelsespolitik i USA

DEFF Research Database (Denmark)

Bundsgaard, Jeppe

2016-01-01

Washington Post har stillet præsidentkandidaterne en række konkrete spørgsmål om deres planer for uddannelsesområdet. Der er mange interessante overvejelser om test, fælles mål, finansiering af skoler mv....

Fluid Flow Characterization of High Turbulent Intensity Compressible Flow Using Particle Image Velocimetry

Science.gov (United States)

2015-08-01

completed in order to begin further experimentation. A 10 kHz Time Resolved Particle Image Velocimetry (TR-PIV) system and a 3 kHz Planer Laser ...9 2.3.2 Planar Laser Induced Fluorescence (PLIF...35 Figure 4.4: Solenoid valve (a), proportional control valve (b) and flowmeter (c) ...................................... 36 Figure 4.5

Compact and high-sensitivity 100-Gb/s (4 × 25 Gb/s) APD-ROSA with a LAN-WDM PLC demultiplexer.

Science.gov (United States)

Yoshimatsu, Toshihide; Nada, Masahiro; Oguma, Manabu; Yokoyama, Haruki; Ohno, Tetsuichiro; Doi, Yoshiyuki; Ogawa, Ikuo; Takahashi, Hiroshi; Yoshida, Eiji

2012-12-10

We demonstrate an integrated 100 GbE receiver optical sub-assembly (ROSA) that incorporates a monolithic four-channel avalanche photodiode (APD) array and a planer lightwave circuit (PLC) based LAN-WDM demultiplexer. A record minimum receiver sensitivity of -20 dBm and 50-km error-free SMF transmission without an optical amplifier have been achieved.

Regional softwood sawmill processing variables as influenced by productive capacity

Science.gov (United States)

P. H. Steele; F. G. Wagner; K. E. Skog

The relationship between annual softwood sawmill production and lumber processing variables was examined using data from Sawmill Improvement Program (SIP) studies of 650 softwood mills. The variables were lumber recovery factor (LRF); headrig and resaw kerf width; total sawing variation, rough green size, and oversizing-undersizing for 4/4 and 8/4 lumber; planer...

40 CFR 52.120 - Identification of plan.

Science.gov (United States)

2010-07-01

... Devices) 12-3-6(Penalty for Violation) 12-4-1(Shade, Density, or Opacity of Emissions) 12-4-2(Dust Control...) Sec. 2, Reg. 1(Shade, Density or Opacity of Emissions) Sec. 2, Reg. 2(Particulate Matter) Sec. 2, Reg...(Particulate Emissions: Portland Cement Plants) R9-3-308 (Particulate Emissions: Heater-Planers) Submitted on...

Forskningsprojekt om musikterapi på Plejehjemmet Caritas

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner

2004-01-01

Gennemgang af 3 planer i interpersonel kommunikation; kommunikationen indeholder et semantisk budskab, et følelsesmæssigt udtryk og medfører en påvirkning af andre. Alle former for samvær er kommunikation. Med dette som udgangspunkt redegøres for musikterapiteori og -praksis på demensområdet. Der...

Preparation of high dielectric constant thin films of CaCu3 Ti4 by sol ...

Indian Academy of Sciences (India)

WINTEC

group Im3 in which the Ti. 4+ ions occupy centrosymmetric position in the octahedral sites. The angle of tilt is suffi- ciently large that the Cu. 2+ ions occupy an essentially square-planer environment (Adams et al 2006). High di- electric constant, as shown by CCTO, is usually found in ferroelectric materials; however, no ...

Brasilien bygger sit eget internet

DEFF Research Database (Denmark)

Hansen, Kenneth; Føhns, Henrik

2014-01-01

Den brasilianske præsident Dilma Rousseff har sat blus under landets planer om at lave et internet, der ikke løber gennem USA, og hvor brasilianske borgeres data bliver på servere i Brasilien – også selvom de ligger hos Google eller Facebook. Hun vil også have det nationale postvæsen til at tilbyde...

Kan bæredygtighed og olieudvinding gå hånd i hånd?

DEFF Research Database (Denmark)

Heðinsdóttir, Katla; Gjerris, Mickey

2015-01-01

De fleste har indset, at der skal handles, hvis vi skal have klimakrisen under blot en smule kontrol. Og at Danmark vil gå foran. Derfor er det umiddelbart overraskende, at den danske regering i samarbejde med en række olieselskaber nu har planer om at pumpe hver en dråbe olie op af Nordsøen....

"To big to fail"-doktrinen står for fald?

DEFF Research Database (Denmark)

Grosen, Anders

2010-01-01

Hvis præsident Barack Obama får sin vilje, skal den klassiske "too big to fail"-bankdoktrin afløses af en "small enough to fail"-doktrin. Det fremgår af præsidentens planer om at opdele storbankerne i mindre enheder og forbyde bankernes handelsaktiviteter for egen regning. Hvis Barack Obama får...

Strengthening the Legal and Regulatory Framework of the Tobacco ...

International Development Research Centre (IDRC) Digital Library (Canada)

The majority of African countries South of Sahara are at the first stage of the tobacco epidemic, but tobacco consumption is increasing rapidly. ... L'épidémie de tabagisme qui se profile à l'horizon et la menace qu'elle fait planer sur le développement ont poussé la plupart des gouvernements d'Afrique subsaharienne à.

Verksamhetsanalys, Planering och Utveckling av en webbtjänst

OpenAIRE

Kindstedt, Tomas

2013-01-01

Arbetet behandlar utvecklingsprocessen av programmet SECTMA, ett cirkeltränings-program designat för människor som utövar kampsporter. Programmet är designat för alla konditionsnivåer från toppidrottare till de som endast vill förbättra sin kondition. Arbetet är tudelat, i den första delen går jag igenom teori för STOF och Agile för att skapa en grund och en förståelse för hur jag vill utveckla programmet. Den andra delen följer med utvecklingsprocessen stegvis. STOF erbjuder ett ramverk...

: tous les projets | Page 345 | CRDI - Centre de recherches pour le ...

International Development Research Centre (IDRC) Digital Library (Canada)

Programme: Alimentation, environnement et santé. Financement total : CA$ 185,442.00. Stratégies de lutte antitabac à Maurice. Projet. L'épidémie de tabagisme qui se profile à l'horizon et la menace qu'elle fait planer sur le développement ont poussé la plupart des gouvernements d'Afrique subsaharienne à ratifier la ...

Characterization of extreme ultraviolet emission from tin-droplets irradiated with Nd:YAG laser plasmas

International Nuclear Information System (INIS)

Aota, T; Nakai, Y; Fujioka, S; Shimomura, M; Nishimura, H; Nishihara, N; Miyanaga, N; Izawa, Y; Mima, K; Fujiwara, E

2008-01-01

EUV emission from spherical and planer targets were precisely characterized as an experimental database for use in EUV source generation at high repetition rates. In the single-shot base experiments, conversion efficiency as high as those for the plasma geometry has been demonstrated. The integrated experiment was made with 10 Hz plasma generation, obtained conversion efficiency is low mainly due to unstable positioning of the droplets

Résultats de recherche | Page 13 | CRDI - Centre de recherches ...

International Development Research Centre (IDRC) Digital Library (Canada)

L'épidémie de tabagisme qui se profile à l'horizon et la menace qu'elle fait planer sur le développement ont poussé la plupart des gouvernements d'Afrique subsaharienne à ratifier la Convention-cadre pour la lutte antitabac (CC. Projet. -. Tabac et pauvreté au Niger. La majorité des pays africains sud du Sahara sont au ...

Mill Glaze: Myth or Reality?

Science.gov (United States)

Mark Knaebe

2013-01-01

Since the mid-1980s, a condition called “mill glaze” (also called planer’s glaze) has sometimes been blamed for the failure of a coating on smooth flat-grained siding and some other wood products. The exact cause of this problem has been a subject of controversy. Many people believe that the coating fails as a result of the planing and/or drying processes. They...

Analyse av en konfliktfylt planprosess. Medvirkning og makt – i spenningsforholdet mellom ulike stedsidentiteter

OpenAIRE

Ihle, Hilde Nygaard

2016-01-01

Oppgaven beskriver reguleringsplanprosessen i 2015, og leter etter spor av Sætres stedsidentitet i historiske planer og debatt. Jeg ser etter identitetsuttrykk forstått som stedsfølelse (sence of place), den sosiale konteksten der stedet skapes og gjenskapes gjennom sosiale praksiser (locale) og den fysiske beskrivelsen av stedet (location). I oppgaven ser jeg på hvordan innbyggerne påvirket prosessen gjennom dialog på to Facebook-sider, avisinnlegg og høringsinnspill. Jeg analyserer akti...

Centrifugal shot blasting. Innovative technology summary report

International Nuclear Information System (INIS)

1999-07-01

At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer

El Green Belt en Inglaterra : de la contención edilicia al valor del paisaje

OpenAIRE

López Varela, Susana

2013-01-01

The change relates to territorial understanding in the 90s , has caused that suburban open spaces, where daily millions of people are living, begin to play an important role in urban policies of many cities and metropolitan areas. Although the development of experiences whit an important revaluation of these spaces , for example Oslo, Hamburg or Vitoria, the indifferent attitude of politicians and urban planers about the urban periphery, has meant thal those areas near downtowns, are not a...

Research on Initiation Sensitivity of Solid Explosive and Planer Initiation System

Directory of Open Access Journals (Sweden)

N Matsuo

2016-09-01

Full Text Available Firstly, recently, there are a lot of techniques being demanded for complex process, various explosive initiation method and highly accurate control of detonation are needed. In this research, the metal foil explosion using high current is focused attention on the method to obtain linear or planate initiation easily, and the main evaluation of metal foil explosion to initiate explosive was conducted. The explosion power was evaluated by observing optically the underwater shock wave generated from the metal foil explosion. Secondly, in high energy explosive processing, there are several applications, such as shock compaction, explosive welding, food processing and explosive forming. In these explosive applications, a high sensitive explosive has been mainly used. The high sensitive explosive is so dangerous, since it can lead to explosion suddenly. So, for developing explosives, the safety is the most important thing as well as low manufacturing cost and explosive characteristics. In this work, we have focused on the initiation sensitivity of a solid explosive and performed numerical analysis of sympathetic detonation. The numerical analysis is calculated by LS-DYNA 3D (commercial code. To understand the initiation reaction of an explosive, Lee-Tarver equation was used and impact detonation process was analyzed by ALE code. Configuration of simulation model is a quarter of circular cylinder. The donor type of explosive (SEP was used as initiation explosive. When the donor explosive is exploded, a shock wave is generated and it propagates into PMMA, air and metallic layers in order. During passing through the layers, the shock wave is attenuated and finally, it has influence on the acceptor explosive, Comp. B. Here, we evaluate the initiation of acceptor explosive and discuss about detonation pressure, reactive rate of acceptor explosive and attenuation of impact pressure.

Kinematic Analysis of 3-DOF Planer Robot Using Artificial Neural Network

Directory of Open Access Journals (Sweden)

Jolly Atit Shah

2012-07-01

Full Text Available Automatic control of the robotic manipulator involves study of kinematics and dynamics as a major issue. This paper involves the forward and inverse kinematics of 3-DOF robotic manipulator with revolute joints. In this study the Denavit- Hartenberg (D-H model is used to model robot links and joints. Also forward and inverse kinematics solution has been achieved using Artificial Neural Networks for 3-DOF robotic manipulator. It shows that by using artificial neural network the solution we get is faster, acceptable and has zero error.

Research on Initiation Sensitivity of Solid Explosive and Planer Initiation System

OpenAIRE

N Matsuo; M Otuka; H Hamasima; K Hokamoto; S Itoh

2016-01-01

Firstly, recently, there are a lot of techniques being demanded for complex process, various explosive initiation method and highly accurate control of detonation are needed. In this research, the metal foil explosion using high current is focused attention on the method to obtain linear or planate initiation easily, and the main evaluation of metal foil explosion to initiate explosive was conducted. The explosion power was evaluated by observing optically the underwater shock wave generated ...

BIOMECHANIC EVALUATION OF CARPENTRY WORKERS IN THE DISTRITO FEDERAL, BRAZIL

Directory of Open Access Journals (Sweden)

Nilton Cesar Fiedler

2010-08-01

Full Text Available The aim of this study was the biomechanical assessment of carpentry woodworkers, located in Brasília, DF. It was filmed the profile of each worker during the performance of his activities in the carpentry and the forces involved in the work were assessed. The image of each woodworker was congealed to accomplish the measurement of articulation angles. The data were submitted to the software of posture analysis “Winowas” (OWAS Method and to the biomechanic model of posture prognosis and static forces, developed by Michigan University. The OWAS method showed that, for all machines and carpentries assessed, the worst posture occurred when the worker lifted and placed the pieces of wood on the floor and during the feeding in the smoother. The tridimensional biomechanic model registered the worst posture in different phases of the work cycle. In the first one, there were problems in all articulations, except the hips, when placing the pieces on the floor from the smoother. In the second one, there were problems in all articulations, except the elbows and the L5-S1 column disc, by feeding the surface planer. The third one, the ankles were the most injured when feeding the smoother, the surface planer, the circular saw and the band saw. According to the results, the woodworkers should try to eliminate the constant work standing upright, use auxiliary machinery to handle pieces of wood, reduce the load during feeding the machines and improve postures.

Hvem er mest fornøyd med samlivet? : samlivskvalitet blant samboere og gifte

OpenAIRE

Wiik, Kenneth Aarskaug; Noack, Turid

2011-01-01

Artiklene i Samfunnsspeilet er tilgjengelige fra SSBs nettsider: http://www.ssb.no/ssp/ Norge og Sverige er land der samboerskap har en lang historie, og der denne samlivsformen er mest utbredt. I dag er et av fire samliv her til lands samboerskap. Men også her er det forskjeller mellom samboere og gifte. Hvis vi sammenlikner samlivskvaliteten blant samboere og gifte, finner vi at unge samboere i alderen 25 til 35 år er minst fornøyd med samlivet sitt. Samboere med planer om å gifte seg me...

MF-plan till företaget Design TL

OpenAIRE

Virtanen, Aino

2015-01-01

Examensarbetet gjordes för företaget Design TL med uppgiften att göra en mark-nadsföringsplan för företaget som skall starta verksamheten 2016. Detta examensar-bete har utförts genom litteraturstudie och information av uppdragsgivaren. Upp-dragsgivaren var Tarja Lamberg. Företaget sysslar med konst, konsthantverks plane-ring och design, tillverkning och försäljning. Uppdragsgivaren gav mig fria händer med planet, det enda som skulle tas i beakta var den begränsade budgeten. Teoride-len satte...

Message of the rainforests. A jungle in Vienna; Botschaft der Regenwaelder. Ein Dschungel in Wien

Energy Technology Data Exchange (ETDEWEB)

Doeller, M.

2003-07-01

A 'rainforest house' is the latest project of the Vienna Zoo, Tiergarten Schoenbrunn. The contribution presents details of the technical facilities of the envisaged building. [German] Durch die in den letzten zehn Jahren erfolgte Modernisierung der Anlagen besitzt der Wiener Tiergarten Schoenbrunn heute internationalen Vorzeigecharakter. Treibende Kraft hinter dieser Entwicklung ist ohne Zweifel Direktor Dr. Helmut Pechlaner. Wie das juengste Projekt ''Regenwaldhaus'' zeigt, stehen dem anerkannten Zoo-Experten in der baulichen Umsetzung seiner Visionen jedoch nicht minder engagierte Planer zur Seite. Allein das gesamte Haustechnikkonzept ist eine ausgetueftelte Zusammenstellung aus verschiedensten Sonderloesungen sowie Systemeigenentwicklungen. (orig.)

Electronic and magnetic properties of magnetoelectric compound Ca2CoSi2O7: An ab initio study

Science.gov (United States)

Chakraborty, Jayita

2018-05-01

The detailed first principle density functional theory calculations are carried out to investigate the electronic and magnetic properties of magnetoelectric compound Ca2CoSi2O7. The magnetic properties of this system are analyzed by calculating various hopping integrals as well as exchange interactions and deriving the relevant spin Hamiltonian. The dominant exchange path is visualized with Wannier functions plotting. Only intra planer nearest neighbor exchange interaction is strong in this system. The magnetocrystalline anisotropy is calculated for this system, and the results of the calculation reveal that the spin quantization axis lies in the ab plane.

Forståelse i forskningsbaseret undervisning – især i relation til humanog samfundsvidenskab

Directory of Open Access Journals (Sweden)

Merete wiberg

2011-03-01

Full Text Available I artiklen vil der på baggrund af en sammenligning af to paradigmer inden for uddannelsestænkning – en angelsaksisk curriculumtænkning (eksemplificeret ved John Biggs og en kontinental didaktisk tænkning (eksemplificeret ved Wolfgang Klafki – blive diskuteret forskelle mellem beskrivelser af idealer for studerendes forståelse med henblik på en diskussionaf, hvad det vil sige at forstå i forskningsbaseret undervisning. Der vil blive argumenteret for, at der skal være en ontologisk dimension på to planer til stede i forskningsbaseret forståelse.

Utveckling av bestrykning för papper avsedda för bläckstråleskrivare

OpenAIRE

Mattsson, Ylva

2002-01-01

Detta examensarbete har utförts på papperstillverkaren Arjo Wiggins’ forskningscenter i Beaconsfield,England. Företaget har planer på att börja tillverka en ny papperskvalitet för bläckstråleskrivare, varförsyftet med arbetet har varit att testa och utvärdera olika sammansättningar av kemikalier som lämparsig för bestrykning av bläckstrålepapper.Ett stort antal bestrykningar har testats med varierande resultat. Det svåraste har visat sig vara attnå en tillräckligt hög grad av vattenhållfasthe...

Effects of metallic nanoparticle doped flux on the interfacial intermetallic compounds between lead-free solder ball and copper substrate

International Nuclear Information System (INIS)

Sujan, G.K.; Haseeb, A.S.M.A.; Afifi, A.B.M.

2014-01-01

Lead free solders currently in use are prone to develop thick interfacial intermetallic compound layers with rough morphology which are detrimental to the long term solder joint reliability. A novel method has been developed to control the morphology and growth of intermetallic compound layers between lead-free Sn–3.0Ag–0.5Cu solder ball and copper substrate by doping a water soluble flux with metallic nanoparticles. Four types of metallic nanoparticles (nickel, cobalt, molybdenum and titanium) were used to investigate their effects on the wetting behavior and interfacial microstructural evaluations after reflow. Nanoparticles were dispersed manually with a water soluble flux and the resulting nanoparticle doped flux was placed on copper substrate. Lead-free Sn–3.0Ag–0.5Cu solder balls of diameter 0.45 mm were placed on top of the flux and were reflowed at a peak temperature of 240 °C for 45 s. Angle of contact, wetting area and interfacial microstructure were studied by optical microscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. It was observed that the angle of contact increased and wetting area decreased with the addition of cobalt, molybdenum and titanium nanoparticles to flux. On the other hand, wettability improved with the addition of nickel nanoparticles. Cross-sectional micrographs revealed that both nickel and cobalt nanoparticle doping transformed the morphology of Cu 6 Sn 5 from a typical scallop type to a planer one and reduced the intermetallic compound thickness under optimum condition. These effects were suggested to be related to in-situ interfacial alloying at the interface during reflow. The minimum amount of nanoparticles required to produce the planer morphology was found to be 0.1 wt.% for both nickel and cobalt. Molybdenum and titanium nanoparticles neither appear to undergo alloying during reflow nor have any influence at the solder/substrate interfacial reaction. Thus, doping of flux

Effects of metallic nanoparticle doped flux on the interfacial intermetallic compounds between lead-free solder ball and copper substrate

Energy Technology Data Exchange (ETDEWEB)

Sujan, G.K., E-mail: sgkumer@gmail.com; Haseeb, A.S.M.A., E-mail: haseeb@um.edu.my; Afifi, A.B.M., E-mail: amalina@um.edu.my

2014-11-15

Lead free solders currently in use are prone to develop thick interfacial intermetallic compound layers with rough morphology which are detrimental to the long term solder joint reliability. A novel method has been developed to control the morphology and growth of intermetallic compound layers between lead-free Sn–3.0Ag–0.5Cu solder ball and copper substrate by doping a water soluble flux with metallic nanoparticles. Four types of metallic nanoparticles (nickel, cobalt, molybdenum and titanium) were used to investigate their effects on the wetting behavior and interfacial microstructural evaluations after reflow. Nanoparticles were dispersed manually with a water soluble flux and the resulting nanoparticle doped flux was placed on copper substrate. Lead-free Sn–3.0Ag–0.5Cu solder balls of diameter 0.45 mm were placed on top of the flux and were reflowed at a peak temperature of 240 °C for 45 s. Angle of contact, wetting area and interfacial microstructure were studied by optical microscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. It was observed that the angle of contact increased and wetting area decreased with the addition of cobalt, molybdenum and titanium nanoparticles to flux. On the other hand, wettability improved with the addition of nickel nanoparticles. Cross-sectional micrographs revealed that both nickel and cobalt nanoparticle doping transformed the morphology of Cu{sub 6}Sn{sub 5} from a typical scallop type to a planer one and reduced the intermetallic compound thickness under optimum condition. These effects were suggested to be related to in-situ interfacial alloying at the interface during reflow. The minimum amount of nanoparticles required to produce the planer morphology was found to be 0.1 wt.% for both nickel and cobalt. Molybdenum and titanium nanoparticles neither appear to undergo alloying during reflow nor have any influence at the solder/substrate interfacial reaction. Thus, doping

Plans for the NKS-program 1998-2001; Planer for NKS-programmet 1998-2001

Energy Technology Data Exchange (ETDEWEB)

Bennerstedt, T [ed.

1999-08-01

The present report is a comprehensive compilation of the adopted NKS project plans for the sixth four-year period, 1998-2001. Most of the plans are in English. One is in both English and Danish. One is in Norwegian, with a brief summary in English. Only two of the six appendices are in English. In spite of this, it is believed that the report will serve as a valuable source of information not only to those actually active in or closely following the NKS work, but also the international scientific community, e.g., within EU and in the Baltic States. The research program incorporates reactor safety, radioactive waste, emergency preparedness, radioecology, cross-disciplinary studies, and information issues. The necessary administrative support program, including the NKS Secretariat, is not described herein. Neither is the aim, scope or organization of NKS, since this has been covered elsewhere. (EHS)

Electricity of machine tool

International Nuclear Information System (INIS)

Gijeon media editorial department

1977-10-01

This book is divided into three parts. The first part deals with electricity machine, which can taints from generator to motor, motor a power source of machine tool, electricity machine for machine tool such as switch in main circuit, automatic machine, a knife switch and pushing button, snap switch, protection device, timer, solenoid, and rectifier. The second part handles wiring diagram. This concludes basic electricity circuit of machine tool, electricity wiring diagram in your machine like milling machine, planer and grinding machine. The third part introduces fault diagnosis of machine, which gives the practical solution according to fault diagnosis and the diagnostic method with voltage and resistance measurement by tester.

Synthesis, spectroscopic studies and antimicrobial activity of chelates 2-(acetyloxy)-benzoic acid with transition metals (CR+3, MN+2, NI+2 AND CU+2)

International Nuclear Information System (INIS)

Khan, B.; Mateen, B.; Ahmed, F.; Ahmed, F.

2007-01-01

2-(acetyloxy)-Benzoic acid chelates with Cr+3, Mn+2, Ni+2 and Cu+2 were synthesized and characterized by the melting point, solubility, Fourier Transform Infrared (FT-IR) Spectroscopy, Atomic Absorption Spectroscopy (AAS), X-Ray Diffraction (XRD) method and evaluated by antimicrobial activity. The functional group present in the chelates was determined by Fourier Transform Infrared Spectroscopy, by X-Ray Diffraction analysis crystal data of chelates, their inter-atomic and inter-planer spacing was also determined. The amount of metal in the chelates was estimated by Atomic Absorption Spectroscopy and their Antimicrobial Activity was studied against Pseudomonas aeruginosa, Escherisha coli and Staphylococcus aureus. (author)

Climate to measure. Facility management for Universal Music at Berlin; Klima nach Mass. TGA-Planung fuer Universal Music in Berlin

Energy Technology Data Exchange (ETDEWEB)

McLead, E.A.

2002-07-01

Designing and constructing the technical facilities for a historical building like the 'Spreespeicher' in Berlin is a difficult but interesting task. The building is owned by Universal Music. Each department has its own office structure, and all offices and structures were integrated in a functional overall concept by the planners of Happold Ingenieure. [German] Klima, Lueftung und Elektroinstallation fuer ein historisches Gebaeude wie den Berliner Spreespeicher zu entwickeln, ist eine schwierige, aber reizvolle Aufgabe. Besonders, wenn der Nutzer Universal Music heisst: Jede Abteilung besitzt ihre eigene Buerostruktur, und alle mussten die TGA-Planer von Happold Ingenieure in ein funktionierendes Gesamtkonzept integrieren. (orig.)

Structure of a zinc oxide ultra-thin film on Rh(100)

Energy Technology Data Exchange (ETDEWEB)

Yuhara, J.; Kato, D.; Matsui, T. [Department of Materials, Physics and Energy Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Mizuno, S. [Department of Molecular and Material Sciences, Kyushu University, Kasuga, Fukuoka 816–8580 (Japan)

2015-11-07

The structural parameters of ultra-thin zinc oxide films on Rh(100) are investigated using low-energy electron diffraction intensity (LEED I–V) curves, scanning tunneling microscopy (STM), and first-principles density functional theory (DFT) calculations. From the analysis of LEED I–V curves and DFT calculations, two optimized models A and B are determined. Their structures are basically similar to the planer h-BN ZnO(0001) structure, although some oxygen atoms protrude from the surface, associated with an in-plane shift of Zn atoms. From a comparison of experimental STM images and simulated STM images, majority and minority structures observed in the STM images represent the two optimized models A and B, respectively.

Studier av radioaktivt cesium i svenska renar. Oversikt over pågående undersokningar 1986

Directory of Open Access Journals (Sweden)

Gustaf Åhman

1986-06-01

Full Text Available I samband med den forskning och forsöksverksamhet som bedrivits vid renforsöksavdelningen har vi arbetat med metodik och teknik som kan tillämpas vid studier av radioaktivt cesium i renbetesväxter och i renar. På betessidan har vi bl.a. arbetat med kontaminering av tungmetaller från gruvindustrin och nitrat efter kvävegödsling. Omfattande studier har utförts av renens mineralstatus och mineralämnesomsättning. Erfarenheter och kunskaper från dessa områden har utnyttjats for planering och genomförande av de studier som nu pågår beträffande radioaktivt cesium i renbetesväxter och renar.

DOE/NE University Program in robotics for advanced reactors research

International Nuclear Information System (INIS)

Trivedi, M.M.

1990-01-01

The document presents the bimonthly progress reports published during 1990 regarding the US Department of Energy/NE-sponsored research at the University of Tennessee Knoxville under the DOE Robitics for Advanced Reactors Research Grant. Significant accomplishments are noted in the following areas: development of edge-segment based stereo matching algorithm; vision system integration in the CESAR laboratory; evaluation of algorithms for surface characterization from range data; comparative study of data fusion techniques; development of architectural framework, software, and graphics environment for sensor-based robots; algorithms for acquiring tactile images from planer surfaces; investigations in geometric model-based robotic manipulation; investigations of non-deterministic approaches to sensor fusion; and evaluation of sensor calibration techniques. (MB)

Greenland and the New Arctic

DEFF Research Database (Denmark)

Wang, Nils; Degeorges, Damien

I dette brief ses der nærmere på de udfordringer, Grønland star overfor i forhold til en mulig statsdannelse og landets ambition om at blive en suveræn nation med egne rettigheder. Grønland fik selvstyre I 2009, netop som Arktis begyndte at få opmærksomhed på globalt plan. Dette var langt fra......, Canada, Rusland og USA. Efter næsten 300 års økonomisk og politisk afhængighed af Danmark, ser det nu ud til, at økonomisk uafhængighed er inden for rækkevidde. Dog betyder den stigende internationale interesse for Arktis også større udfordringer for Grønlands meget lille befolkning og dets planer om...

Dynamic modeling of geometrically nonlinear electrostatically actuated microbeams (Corotational Finite Element formulation and analysis)

Energy Technology Data Exchange (ETDEWEB)

Borhan, H; Ahmadian, M T [Sharif University of Technology, Center of Excellence for Design, Robotics and Automation, School of Mechanical Engineering, PO Box 11365-9567, Tehran (Iran, Islamic Republic of)

2006-04-01

In this paper, a complete nonlinear finite element model for coupled-domain MEMS devices with electrostatic actuation and squeeze film effect is developed. For this purpose, a corotational finite element formulation for the dynamic analysis of planer Euler beams is employed. In this method, the internal nodal forces due to deformation and intrinsic residual stresses, the inertial nodal forces, and the damping effect of squeezed air film are systematically derived by consistent linearization of the fully geometrically nonlinear beam theory using d'Alamber and virtual work principles. An incremental-iterative method based on the Newmark direct integration procedure and the Newton-Raphson algorithm is used to solve the nonlinear dynamic equilibrium equations. Numerical examples are presented and compared with experimental findings which indicate properly good agreement.

Modern elevator drives - aspects for planners and architects; Moderne Aufzugsantriebe - Aspekte fuer Planer und Architekten

Energy Technology Data Exchange (ETDEWEB)

Kirchenmayer, G. [Ziel-Abegg GmbH und Co. KG, Kuenzelsau (Germany)

1997-04-01

Elevators are destined for the vertical haulage of persons and loads. With passenger elevators, comfort is a major aspect. Passengers must not be inconvenienced by jerky lift movements or noise. A further criterion is energy demand. Energy consumption may vary, depending on the type of drive. (orig.) [Deutsch] Der Aufzug hat die Aufgabe, Personen und Lasten senkrecht zu befoerdern. Bei Personenaufzuegen wird grosser Wert auf Fahrkomfort gelegt. Waehrend der Fahrt sollen sich die Fahrgaeste moeglichst ohne ruckartige Aufzugsbewegungen und ohne Geraeuschbelaestigung wohlfuehlen. Der Energiebedarf ist ebenfalls von Bedeutung. Je nach Art des Antriebes ist der Energieverbrauch unterschiedlich. (orig.)

Effect of ammonium perchlorate grain sizes on the combustion of solid rocket propellant

Energy Technology Data Exchange (ETDEWEB)

Hegab, A.; Balabel, A. [Menoufia Univ., Menoufia (Egypt). Faculty of Engineering

2007-07-01

The combustion of heterogeneous solid rocket propellant consisting of ammonium perchlorate (AP) particles was discussed with reference to the chemical and physical complexity of the propellant and the microscopic scale of the combustion zone. This study considered the primary flame between the decomposition products of the binder and the AP oxidizer; the primary diffusion flame from the oxidizer; density and conductivity of the AP and binder; temperature-dependent gas-phase transport properties; and, an unsteady non-planer regression surface. Three different random packing disc models for the AP particles imbedded in a matrix of a hydroxyl terminated polybutadience (HTPB) fuel-binder were used as a base of the combustion code. The models have different AP grain sizes and distribution with the fuel binder. A 2D calculation was developed for the combustion of heterogeneous solid propellant, accounting for the gas phase physics, the solid phase physics and an unsteady non-planar description of the regressing propellant surface. The mathematical model described the unsteady burning of a heterogeneous propellant by simultaneously solving the combustion fields in the gas phase and the thermal field in the solid phase with appropriate jump condition across the gas/solid interface. The gas-phase kinetics was represented by a two-step reaction mechanism for the primary premixed flame and the primary diffusion flame between the decomposition products of the HTPB and the oxidizer. The essentially-non-oscillatory (ENO) scheme was used to describe the propagation of the unsteady non-planer regression surface. The results showed that AP particle size has a significant effect on the combustion surface deformation as well as on the burning rate. This study also determined the effect of various parameters on the surface propagation speed, flame structure, and the burning surface geometry. The speed by which the combustion surface recedes was found to depend on the exposed pressure

Development of Speciality polymer to extract uranium from sea water

International Nuclear Information System (INIS)

Tabushi, Iwao

1983-01-01

Polymer adsorbents were designed to extract uranium efficiently from sea water. The unique coordination structure of uranyl ion was suggested from x-ray crystallography and determining factors influencing equilibrium constants were elucidated. A quantitative estimation of the ligand efficiency was obtained. Based on these considerations on the coordination chemistry of uranyl ion, new polymer adsorbents were prepared and found to show excellent adsorption characteristics. The macrocyclic ligands mimicking crystallographic structure of the complex: planer headentate, were found to show large equilibrium constants as well as high selectivities toward metal ions. Direct usage of sea current was proposed as a most economical way of treating a huge amount of sea water. The polymer adsorbent could recover uranium with large adsorption rate just by immersing the resin into Kuroshio. (author)

Long range inductive power transfer system

International Nuclear Information System (INIS)

Lawson, James; Pinuela, Manuel; Yates, David C; Lucyszyn, Stepan; Mitcheson, Paul D

2013-01-01

We report upon a recently developed long range inductive power transfer system (IPT) designed to power remote sensors with mW level power consumption at distances up to 7 m. In this paper an inductive link is established between a large planar (1 × 1 m) transmit coil (Tx) and a small planer (170 × 170 mm) receiver coil (Rx), demonstrating the viability of highly asymmetrical coil configurations that real-world applications such as sensor networks impose. High Q factor Tx and Rx coils required for viable power transfer efficiencies over such distances are measured using a resonant method. The applicability of the Class-E amplifier in very low magnetic coupling scenarios and at the high frequencies of operation required for high Q operation is demonstrated by its usage as the Tx coil driver

Clinical assessment of SPECT/CT co-registration image fusion

International Nuclear Information System (INIS)

Zhou Wen; Luan Zhaosheng; Peng Yong

2004-01-01

Objective: Study the methodology of the SPECT/CT co-registration image fusion, and Assessment the Clinical application value. Method: 172 patients who underwent SPECT/CT image fusion during 2001-2003 were studied, 119 men, 53 women. 51 patients underwent 18FDG image +CT, 26 patients underwent 99m Tc-RBC Liver pool image +CT, 43 patients underwent 99mTc-MDP Bone image +CT, 18 patients underwent 99m Tc-MAA Lung perfusion image +CT. The machine is Millium VG SPECT of GE Company. All patients have been taken three steps image: X-ray survey, X-ray transmission and nuclear emission image (Including planer imaging, SPECT or 18 F-FDG of dual head camera) without changing the position of the patients. We reconstruct the emission image with X-ray map and do reconstruction, 18FDG with COSEM and 99mTc with OSEM. Then combine the transmission image and the reconstructed emission image. We use different process parameters in deferent image methods. The accurate rate of SPECT/CT image fusion were statistics, and compare their accurate with that of single nuclear emission image. Results: The nuclear image which have been reconstructed by X-ray attenuation and OSEM are apparent better than pre-reconstructed. The post-reconstructed emission images have no scatter lines around the organs. The outline between different issues is more clear than before. The validity of All post-reconstructed images is better than pre-reconstructed. SPECT/CT image fusion make localization have worthy bases. 138 patients, the accuracy of SPECT/CT image fusion is 91.3% (126/138), whereas 60(88.2%) were found through SPECT/CT image fusion, There are significant difference between them(P 99m Tc- RBC-SPECT +CT image fusion, but 21 of them were inspected by emission image. In BONE 99m Tc -MDP-SPECT +CT image fusion, 4 patients' removed bone(1-6 months after surgery) and their relay with normal bone had activity, their morphologic and density in CT were different from normal bones. 11 of 20 patients who could

A comparative study of stabilizing control of a planer electromagnetic levitation using PID and LQR controllers

Directory of Open Access Journals (Sweden)

Mundher H.A. Yaseen

Full Text Available Magnetic levitation is a technique to suspend an object without any mechanical support. The main objective of this study is to demonstrate stabilized closed loop control of 1-DOF Maglev experimentally using real-time control simulink feature of (SIMLAB microcontroller. Proportional Integral Derivative (PID and Linear Quadratic Regulator (LQR controllers are employed to examine the stability performance of the Maglev control system under effect of unbalanced change of load and wave signal on Maglev plane. The effect of unbalanced change of applied load on single point, line and plane are presented. Furthermore, in order to study the effect of sudden change in input signal, the input of wave signal has been applied on all points of the prototype maglev plate simultaneously. The results of pulse width modulation (PWM reveal that the control system using LQR controller provides faster response to adjust the levitated plane comparing to PID controller. Moreover, the air gap distance that controlled using PID controller is rather stable with little oscillation. Meanwhile, LQR controller provided more stability and homogeneous response. Keywords: Magnetic levitation (Maglev, Linear Quadratic Regulator (LQR, PID controller, SIMLAB Platform

A comparative study of stabilizing control of a planer electromagnetic levitation using PID and LQR controllers

Science.gov (United States)

Yaseen, Mundher H. A.

Magnetic levitation is a technique to suspend an object without any mechanical support. The main objective of this study is to demonstrate stabilized closed loop control of 1-DOF Maglev experimentally using real-time control simulink feature of (SIMLAB) microcontroller. Proportional Integral Derivative (PID) and Linear Quadratic Regulator (LQR) controllers are employed to examine the stability performance of the Maglev control system under effect of unbalanced change of load and wave signal on Maglev plane. The effect of unbalanced change of applied load on single point, line and plane are presented. Furthermore, in order to study the effect of sudden change in input signal, the input of wave signal has been applied on all points of the prototype maglev plate simultaneously. The results of pulse width modulation (PWM) reveal that the control system using LQR controller provides faster response to adjust the levitated plane comparing to PID controller. Moreover, the air gap distance that controlled using PID controller is rather stable with little oscillation. Meanwhile, LQR controller provided more stability and homogeneous response.

Analytical studies of plasma extraction electrodes and ion beam formation

International Nuclear Information System (INIS)

Hassan, A.; Elsaftawy, A.; Zakhary, S. G.

2007-01-01

In this work a theoretical and computational study on the space charge dominated beams extracted from a plasma ion source through a spherical and planer electrode is simulated and optimized. The influence of some electrode parameters: axial position, electrode diameter, material and shape; on ion current extracted from a plasma source; were investigated and compared. The optimum values and conditions of the curvature of the plasma boundary, angular divergence, perveance, and the extraction gap were optimized to extract a high quality beams. It has shown that for a planar electrode system there is usually a minimum for optimum perveance versus angular divergence at about ? 0.6 for corresponding aspect ratios. This was assured by experimental data. The appropriate spherical electrode system focus the beam to a minimum value located at a distance equal to the focal length of the spherical extraction electrode.

Viking Link er en risikofyldt investering af broget kulør

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Lund, Henrik; Djørup, Søren Roth

2018-01-01

Danmark har planer om at bygge en kabelforbindelse til England ved navn Viking Link. Dette er et investeringsprojekt til 11 mia. kroner. Vi har tidligere forholdt os kritisk til ikke blot selve investeringen, men også processen bag investeringsbeslutningen, der er foregået uden, at offentligheden...... har kunnet få indblik i beslutningsgrundlaget. Tilbage står, at Viking Link er en risikofri investering for de danske elproducenter, som får alle fordelene, men er særdeles risikofyldt for de danske elforbrugere, som står tilbage med regningen, hvis forudsætningerne ikke holder. Desuden findes...... alternativer, hvor vi som samfund får mere for pengene, men økonomien i disse alternativer forringes, hvis vi bygger Viking Link. Vi anbefaler, at man som minimum udskyder Viking Link, til vi har realiseret de bedre alternativer....

Pseudocapacitive Transparent/Flexible Supercapacitor based on Graphene wrapped Ni(OH)2 Nanosheet Transparent Film Produced using Scalable Bio-inspired Methods

International Nuclear Information System (INIS)

Li, Na; Huang, Xuankai; Li, Ruijian; Chen, Yiming; Li, Yunyong; Shi, Zhicong; Zhang, Haiyan

2016-01-01

High specific-capacity pseudocapacitive transition-metal-hydroxide (TMH) materials are desirable for future high performance transparent supercapacitors, but have been rarely reported previously. The successful synthesis of TMH materials with desired nanostructures is a key factor for their transparency. Here, Ni(OH) 2 nanosheet transparent film (NNS-TF) was developed simply through a gas-liquid diffusion method. The nanostructures were enwrapped in graphene shells (NNS@Gr-TF) for using as transparent electrodes. The unique encapsulation structures build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer. The specific areal capacitance (18.9 mF/cm 2 at 0.1 mA/cm 2 ) was greatly improved, at least a thousand times higher than the reported value for transparent devices based on planer CVD graphene, and ten times as that for 3D micro-structured graphene membrane.

Six New Polyacetylenic Alcohols from the Marine Sponges Petrosia sp. and Halichondria sp.

Science.gov (United States)

Gabriel, Adeyemi Francis; Li, Zhen; Kusuda, Ryouhei; Tanaka, Chiaki; Miyamoto, Tomofumi

2015-01-01

Six new polyacetylenic alcohols, termed strongylotriols A and B; pellynols J, K, and L; and isopellynol A, together with three known polyacetylenic alcohols, pellynols A, B, and C were isolated from the marine sponges Petrosia sp., and Halichondria sp. collected in Okinawa, Japan. Their planer structures were determined based on 2D-NMR and mass spectrometric analysis of the degraded products by RuCl3 oxidation. The absolute stereochemistry of isolates was examined by their Mosher's esters. The strongylotriols were found to be optically pure compounds, whereas the pellynols are diastereomeric mixtures at the C-6 position. Proliferation experiments using the HeLa and K562 cell lines suggested that the essential structural units for activity are the "hexa-2,4-diyn-1,6-diol" and "pent-1-en-4-yn-3-ol" on the termini.

THERMAL PERFORMANCE OF FLAT PLATE SOLAR COLLECTOR

Directory of Open Access Journals (Sweden)

TABET I.

2017-06-01

Full Text Available In this paper, a theoretical and experimental studyof flat platesolar water collector with reflectors.A mathematical model based on energy balance equations saw the thermal behavior of the collector is investigated. The experimental test was made at the unit research applies in renewable energy (URAER located in southern Algeria.An increase of 23% for solar radiation incident on the collector surface with the addition of the planers reflectors in the day of May, this increase causes an improvement of the performance of the collector,the fluid temperature increases with an average of 5%. Thetests conducted on the flat plate solar water collector in open circuit enabled the determination of thermal performance of the collector by estimating the daily output The thermal efficiency of the collector ranges from 1% -63% during the day, a mean value of 36%obtained.

Aquarius - A Modelling Package for Groundwater Flow and Coupled Heat Transport in the Range 0.1 to 100 MPa and 0.1 to 1000 C

Science.gov (United States)

Cook, S. J.

2009-05-01

Aquarius is a Windows application that models fluid flow and heat transport under conditions in which fluid buoyancy can significantly impact patterns and magnitudes of fluid flow. The package is designed as a visualization tool through which users can examine flow systems in environments, both low temperature aquifers and regions with elevated PT regimes such as deep sedimentary basins, hydrothermal systems, and contact thermal aureoles. The package includes 4 components: (1) A finite-element mesh generator/assembler capable of representing complex geologic structures. Left-hand, right-hand and alternating linear triangles can be mixed within the mesh. Planer horizontal, planer vertical and cylindrical vertical coordinate sections are supported. (2) A menu-selectable system for setting properties and boundary/initial conditions. The design retains mathematical terminology for all input parameters such as scalars (e.g., porosity), tensors (e.g., permeability), and boundary/initial conditions (e.g., fixed potential). This makes the package an effective instructional aide by linking model requirements with the underlying mathematical concepts of partial differential equations and the solution logic of boundary/initial value problems. (3) Solution algorithms for steady-state and time-transient fluid flow/heat transport problems. For all models, the nonlinear global matrix equations are solved sequentially using over-relaxation techniques. Matrix storage design allows for large (e.g., 20000) element models to run efficiently on a typical PC. (4) A plotting system that supports contouring nodal data (e.g., head), vector plots for flux data (e.g., specific discharge), and colour gradient plots for elemental data (e.g., porosity), water properties (e.g., density), and performance measures (e.g., Peclet numbers). Display graphics can be printed or saved in standard graphic formats (e.g., jpeg). This package was developed from procedural codes in C written originally to

Study of high speed complex number algorithms. [for determining antenna for field radiation patterns

Science.gov (United States)

Heisler, R.

1981-01-01

A method of evaluating the radiation integral on the curved surface of a reflecting antenna is presented. A three dimensional Fourier transform approach is used to generate a two dimensional radiation cross-section along a planer cut at any angle phi through the far field pattern. Salient to the method is an algorithm for evaluating a subset of the total three dimensional discrete Fourier transform results. The subset elements are selectively evaluated to yield data along a geometric plane of constant. The algorithm is extremely efficient so that computation of the induced surface currents via the physical optics approximation dominates the computer time required to compute a radiation pattern. Application to paraboloid reflectors with off-focus feeds in presented, but the method is easily extended to offset antenna systems and reflectors of arbitrary shapes. Numerical results were computed for both gain and phase and are compared with other published work.

Boligmarkedet uden for de store byer

DEFF Research Database (Denmark)

Larsen, Jacob Norvig; Andersen, Hans Thor; Haldrup, Karin

landet som helhed, hvor den østjyske millionby og hovedstaden er migrationens mål. Dermed må der på steder langt fra de store byers infrastruktur og arbejdspladser forventes faldende eller meget begrænset efterspørgsel efter boliger. Det gælder især gamle, dårligt vedligeholdte boliger og boliger med...... og lokalpolitiske planer og indsatser. Tre casestudier belyser, hvordan man i lokalsamfund i tre kommuner uden for de store byer aktivt tager den udfordring op, som følger af en generel strukturændring med øget urbanisering og aldrende befolkning i områderne uden for de store byer. Med blandt andet...... nye samarbejdsformer mellem private, frivillige og kommunale aktører og aktivitets- og beboerhuse som base for foreningsaktivitet er det flere steder lykkedes at tiltrække tilflyttere til samfund langt uden for de store byer....

Support mechanism for a mirrored surface or other arrangement

Science.gov (United States)

Cutburth, Ronald W.

1987-01-01

An adjustment mechanism such as a three point spherical mount for adjustably supporting a planer mirror or other type of arrangement relative to a plane defined by a given pair of intersecting perpendicular axes is disclosed herein. This mechanism includes first means for fixedly supporting the mirror or other arrangement such that the latter is positionable within the plane defined by the given pair of intersecting perpendicular axes. This latter means and the mirror or other such arrangement are supported by second means for limited movement back and forth about either of the intersecting axes. Moreover, this second means supports the first means and the mirror or other arrangement such that the latter is not movable in any other way whereby the point on the mirror or other arrangement coinciding with the intersection of the given axes does not move or float, thereby making the ability to adjust the mirror or other such arrangement more precise and accurate.

4. meeting on passive solar energy houses. Proceedings; 4. Passivhaus Tagung. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Feist, W [ed.; Sariri, V; Nagel, M [comps.; Passivhaus Institut, Darmstadt (Germany)

2000-03-01

This is the report on the 4th Passive Building Conference, which took place at Kassel on March 10/11, 2000. There were eight sections: (a) Planners' workshop; (b) Architecture; (c) Ventilation; (d) Construction practice; (e) Subjective users' comfort and measured results; (f) Practical implementation; (g) economic and ecological assessment; (h) Solar architecture; (i) Heat supply. It was considered particularly favourable that passive solar buildings do not only offer a solution to ecological problems but also a growing market. [German] Der Tagungsband der '4. Passivhaus Tagung', die von 10. bis 11. Maerz 2000 in Kassel stattgefunden hat, beinhalten Beitraege, die in acht Arbeitsgruppen vorgetragen worden: (a) Planer-Werkstatt; (b) Architektur; (c) Lueftungsplanung; (d) Baupraxis; (e) Wohnerfahrung, Messergebnisse; (f) Umsetzung; (g) oekonomische und oekologische Bewertung; (h) Solararchitektur; (i) Waermeversorgung. Es wird vom Herausgeber als besonders erfreulich herausgestellt, dass durch eine erfolgreiche Passivhaus-Entwicklung neben der Loesung der Klimaprobleme zugleich ein neuer Wachstumsmarkt geschaffen werde, der mit einer Mehrung von Wertschoepfung und Wohlstand verbunden ist. (AKF)

The values of MSCT multi-planar reconstruction in the diagnosis of lumbar spondylolysis

International Nuclear Information System (INIS)

Tan Qixuan; Zhu Gangming; Qian Huirong; Zhong Sheng

2007-01-01

Objective: To study the reasonable schedule and diagnostic values of MSCT multi-planar reconstruction in patients with lumbar spondylolysis. Methods: Volume scan ranging from T12 to S1 was done in 540 cases suffered from backleg pain without definite trauma. The lumbar disc axial and whole lumbar axial, sagital, coronal images were reconstructed from raw data of MSCT. Results: Of the 540 cases, 54 spondylolysis in isthmus of lumbar pedicle were demonstrated in 29 ones (29/540, 5.37%). 20 cases were accompanied with spondylolisthesis. The sagital multi-planar reconstruction was the best way to reveal the fissures of spondylolysis and accompanying abnormalities. The detectable ratio of fissures in lumbar disc with axial, whole lumbar axial, sagital and coronal multi-planer reconstruction images were 7.41%, 100%, 100% and 51.85% respectively. Conclusions: MSCT sagital multi-planar reconstruction is the best images to reveal the fissures of spondylolysis. It should be taken as routine item in MSCT examination for the patients with lower back pain. (authors)

Synthesis, Spectral and Magnetic Studies of Newly Mixed-Ligand Complexes of 4-Formyl-Acetanilide Thiosemicarbazone and 3,4-Dihydrocinnamic Acid with Some Metal Ions

Directory of Open Access Journals (Sweden)

Shayma A. Shaker

2010-01-01

Full Text Available New complexes with thiosemicarbazone derivative and 3, 4-dihydrocinnamic acid were prepared and characterized by elemental analysis, determination of metal, IR, 1H NMR, electronic spectroscopy and magnetic measurements. The thiosemicarbazone derivative forms bidentate ligand complexes of the general formula, [M(Thz(Caf] where Thz = 4-formyl- acetanilide thiosemicarbazone, Caf = 3,4-dihydrocinnamic acid and M=Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Pb2+. The IR and 1H NMR spectra indicates that the (Thz was coordinated with the metal ions through the N and S atoms and the (Caf was negatively charged bidentat ligand and was coordinated with the metal ions through the two O atoms. Electronic spectra and magnetic susceptibility measurements of the solid complexes indicates the tetrahedral geometry around the Mn2+, Fe2+, Co2+, Ni2+, Zn2+, Cd2+ and irregular tetrahedral geometry around Pb2+ ion while the Cu2+ complex has squar planer geometry.

Mobilitet, barrierer & muligheder

DEFF Research Database (Denmark)

Petersen, Mimi

2011-01-01

stereotypering. På den ene side peger udsagn fra de unge drenge på en oplevelse af at blive kriminaliseret i kraft af deres køn (det maskuline kombineret med at have en anden hudfarve). Og de unge piger oplever, at de udover at blive kategoriseret som ”indvandrere” også bliver kategoriseret som passive, umyndige...... som en vej ud af irakiske Kurdistan, men ikke tilbage til Danmark. Drengene fra familier med bedre økonomiske ressourcer giver udtryk for, ønske om at rejse til andre lande. På grund af begrænsede sproglige kompetencer oplever hovedparten af de unge (både i Danmark og i irakiske Kurdistan) barrierer i...... har planer for at flytte fra Kurdistan. De har dansk statsborgerskab, men de vil ikke tilbage til Danmark. I de fortællinger, som afhandlingen bygger på, er det tydeligt at samspillet mellem flere sociale dimensioner, spiller ind på de unges selvforståelse, tilhørsforhold, erfaringer og deres valg af...

Mechanisms of collective cell movement lacking a leading or free front edge in vivo.

Science.gov (United States)

Uechi, Hiroyuki; Kuranaga, Erina

2017-08-01

Collective cell movement is one of the strategies for achieving the complex shapes of tissues and organs. In this process, multiple cells within a group held together by cell-cell adhesion acquire mobility and move together in the same direction. In some well-studied models of collective cell movement, the mobility depends strongly on traction generated at the leading edge by cells located at the front. However, recent advances in live-imaging techniques have led to the discovery of other types of collective cell movement lacking a leading edge or even a free edge at the front, in a diverse array of morphological events, including tubule elongation, epithelial sheet extension, and tissue rotation. We herein review some of the developmental events that are organized by collective cell movement and attempt to elucidate the underlying cellular and molecular mechanisms, which include membrane protrusions, guidance cues, cell intercalation, and planer cell polarity, or chirality pathways.

Pulmonary Artery Aneurysm/Pseudoaneurysm, a Delayed Complication of Lung Abscess: A Case Report.

Science.gov (United States)

Oguma, Tsuyoshi; Morise, Masahiro; Harada, Kazuki; Tanaka, Jun; Sato, Masako; Horio, Yukihiro; Takiguchi, Hiroto; Tomomatsu, Hiromi; Tomomatsu, Katsuyoshi; Takihara, Takahisa; Niimi, Kyoko; Hayama, Naoki; Aoki, Takuya; Urano, Tetsuya; Ito, Chihiro; Koizumi, Jun; Asano, Koichiro

2015-09-20

Massive hemoptysis mostly arises from the bronchial arteries; however, bleeding can also occur from a lesion in injured pulmonary arteries, such as pulmonary artery aneurysm/pseudoaneurysm (PAA/PAP), during pulmonary infection. A 66-year-old man was admitted with a diagnosis of lung abscess in the right lower lobe that was complicated with pyothorax. Intravenous administration of antibiotics and thoracic drainage successfully controlled the infection and inflammation until day 16, when the patient began to exhibit hemoptysis and bloody pleural effusion. Enhanced computed tomography (CT) with multi-planer reconstruction (MPR) images showed a highly enhanced mass inside the abscess fed by the pulmonary artery, suggesting PAA/PAP. Pulmonary angiography confirmed PAA/PAP, and embolization with coils successfully stopped both the bleeding into the sputum and pleural effusion, with a collapsed aneurysm visible on chest CT scan. Clinicians should consider the possibility of PAA/PAP in the differential diagnosis of hemoptysis during the treatment of patients with lung abscess. MPR CT is helpful for the diagnosis of PAA/PAP and its feeding vessels.

Creation of individual ideally shaped stents using multi-slice CT: in vitro results from the semi-automatic virtual stent (SAVS) designer

International Nuclear Information System (INIS)

Hyodoh, Hideki; Katagiri, Yoshimi; Hyodoh, Kazusa; Akiba, Hidenari; Hareyama, Masato; Sakai, Toyohiko

2005-01-01

To plan stent-grafting for thoracic aortic aneurysm with complicated morphology, we created a virtual stent-grafting program [Semi Automatic Virtual Stent (SAVS) designer] using three-dimensional CT data. The usefulness of the SAVS designer was evaluated by measurement of transformed anatomical and straight stents. Curved model images (source, multi-planer reconstruction and volume rendering) were created, and a hollow virtual stent was produced by the SAVS designer. A straight Nitinol stent was transformed to match the curved configuration of the virtual stent. The accuracy of the anatomical stent was evaluated by experimental strain phantom studies in comparison with the straight stent. Mean separation length was 0 mm in the anatomical stent [22 mm outer diameter (OD)] and 5 mm in the straight stent (22 mm OD). The straight stent strain voltage was four times that of the anatomical stent at the stent end. The anatomical stent is useful because it fits the curved structure of the aorta and reduces the strain force compared to the straight stent. The SAVS designer can help to design and produce the anatomical stent. (orig.)

Wind energy utilisation. 7. enl. and compl. rev. ed.; Nutzung der Windenergie

Energy Technology Data Exchange (ETDEWEB)

Heier, Siegfried [Kassel Univ. (Germany)

2016-07-01

The use of wind energy register furthermore rapid technological advances. Intensive research efforts in scientific institutions and in industry have led to it that the plants are reliable high technology products today. An overview of these developments give the completely revised BINE reference-book. The focus is on technologies, concepts and the market development of the wind industry. Other topics include network integration, economy and current research perspectives as well as environmental balance and repowering. Planners, investors and students get an overview of the status and development of the technology, the economy and the legal framework. [German] Die Nutzung der Windenergie verzeichnet weiterhin rasante technologische Fortschritte. Intensive Forschungsanstrengungen an wissenschaftlichen Institutionen und in der Industrie haben dazu gefuehrt, dass die Anlagen heute zuverlaessige Hightech Produkte sind. Einen Ueberblick ueber diese Entwicklungen gibt das vollstaendig ueberarbeitete BINE-Fachbuch. Im Mittelpunkt stehen Technologien, Konzepte und die Marktentwicklung der Windbranche. Weitere Themen sind die Netzintegration, Wirtschaftlichkeit und aktuelle Forschungsperspektiven sowie Umweltbilanz und Repowering. Planer, Investoren und Studierende erhalten einen Ueberblick ueber Stand und Entwicklung der Technik, die Wirtschaftlichkeit sowie die rechtlichen Rahmenbedingungen.

Improved atomic data for electron-transport predictions by the codes TIGER and TIGERP: II. Electron stopping and range data

International Nuclear Information System (INIS)

Peek, J.M.; Halbleib, J.A.

1983-04-01

The electron stopping and range data now used in the TIGER and TIGERP electron-transport codes are extracted and compared with other data for these processes. At the smallest collision energies treated by these codes, E approx. 1 keV, the stopping-power is estimated to be accurate for small-Z targets, to be about 25 percent too small for Z near 36 and to be a factor of three too small for Z > 79. These errors decrease with increasing E and the largest error for any target is roughly 20 percent for E = 10 keV. The closely related continuous-slowing-down range is estimated, at 1 keV, to be about 25 percent too small for small-Z targets and a factor of 2 too large for large-Z targets. The electron-transport problem of reflection from planer surfaces is re-investigated with improved stopping-power data. The effects of this change for the examples considered were about the size of the statistical uncertainties in the calculation, 1 to 2 percent

Multifunctional facades - design optimisation with CAD; Multifunktionale Fassaden - Effektive Auslegung durch CAD-Einsatz

Energy Technology Data Exchange (ETDEWEB)

Viotto, M. [Institut fuer Solare Energieversorgungstechnik (ISET), Kassel (Germany). Abt. fuer Anlagen- und Messtechnik

1998-02-01

The energetically optimal design of PV facades requires the consideration of many technical conditions (different elevations/orientations of modules; shading possibility; high and different module temperatures). It also requires the interface with architecture, civil and electrical engineering. To support this planning process, the software program PV-CAD was developed which rapidly calculates energy yield under conditions of inhomogeneous irradiance, shading, thermal behaviour of modules and electrical layout. PV-CAD is compatible with other civil and electrical engineering CAD programs and incorporates extensive databases (weather data; modules and inverter types). (orig.) [Deutsch] Fuer optimalen Energieertrag sind zahlreiche technische Randbedingungen bei der Auslegung einer Photovoltaik (PV)-Fassade zu beruecksichtigen (unterschiedliche Ausrichtungen/Neigungen der Module; moegliche Teilabschattung; hoehere und unterschiedliche Betriebstemperaturen). Installation und Betrieb einer PV-Fassade erfordern die Abstimmung zwischen Architektur, Bauwesen und Elektrotechnik. Zur Unterstuetzung der Planer wurde das Programm PV-CAD entwickelt, das den Energieertrag unter Beruecksichtigung von inhomogener Einstrahlung und Abschattung, Temperaturverhalten der Fassadenmodule sowie unterschiedlichen elektrischen Anlagenkonzepten schnell ermittelt; es fuegt sich nahtlos in CAD-Arbeitsumgebungen ein. (orig.)

Photoemission studies of fluorine functionalized porous graphitic carbon

Science.gov (United States)

Ganegoda, Hasitha; Jensen, David S.; Olive, Daniel; Cheng, Lidens; Segre, Carlo U.; Linford, Matthew R.; Terry, Jeff

2012-03-01

Porous graphitic carbon (PGC) has unique properties desirable for liquid chromatography applications when used as a stationary phase. The polar retention effect on graphite (PREG) allows efficient separation of polar and non-polar solutes. Perfluorinated hydrocarbons however lack polarizabilty and display strong lipo- and hydrophobicity, hence common lipophilic and hydrophilic analytes have low partition coefficiency in fluorinated stationary phases. Attractive interaction between fluorinated stationary phase and fluorinated analytes results in strong retention compared to non-fluorinated analytes. In order to change the selectivities of PGC, it is necessary to develop a bonded PGC stationary phase. In this study, we have synthesized perfluorinated, PGC using hepatadecafluoro-1-iodooctane, under different temperature conditions. Surface functionalization of the raw material was studied using photoelectron spectroscopy (PES). Results indicate the existence of fluorine containing functional groups, -CF, -CF2 along with an intercalated electron donor species. Multiple oxygen functional groups were also observed, likely due to the presence of oxygen in the starting material. These oxygen species may be responsible for significant modifications to planer and tetrahedral carbon ratios.

Photoemission studies of fluorine functionalized porous graphitic carbon

Energy Technology Data Exchange (ETDEWEB)

Ganegoda, Hasitha; Olive, Daniel; Cheng, Lidens; Segre, Carlo U.; Terry, Jeff [Department of Physics, Illinois Institute of Technology, Chicago, Illinois 60616 (United States); Jensen, David S.; Linford, Matthew R. [Department of Chemistry and Biochemistry, Brigham Young University, Provo, Utah 84602 (United States)

2012-03-01

Porous graphitic carbon (PGC) has unique properties desirable for liquid chromatography applications when used as a stationary phase. The polar retention effect on graphite (PREG) allows efficient separation of polar and non-polar solutes. Perfluorinated hydrocarbons however lack polarizabilty and display strong lipo- and hydrophobicity, hence common lipophilic and hydrophilic analytes have low partition coefficiency in fluorinated stationary phases. Attractive interaction between fluorinated stationary phase and fluorinated analytes results in strong retention compared to non-fluorinated analytes. In order to change the selectivities of PGC, it is necessary to develop a bonded PGC stationary phase. In this study, we have synthesized perfluorinated, PGC using hepatadecafluoro-1-iodooctane, under different temperature conditions. Surface functionalization of the raw material was studied using photoelectron spectroscopy (PES). Results indicate the existence of fluorine containing functional groups, -CF, -CF{sub 2} along with an intercalated electron donor species. Multiple oxygen functional groups were also observed, likely due to the presence of oxygen in the starting material. These oxygen species may be responsible for significant modifications to planer and tetrahedral carbon ratios.

4. meeting on passive solar energy houses. Proceedings; 4. Passivhaus Tagung. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Feist, W. [ed.; Sariri, V.; Nagel, M. [comps.] [Passivhaus Institut, Darmstadt (Germany)

2000-03-01

This is the report on the 4th Passive Building Conference, which took place at Kassel on March 10/11, 2000. There were eight sections: (a) Planners' workshop; (b) Architecture; (c) Ventilation; (d) Construction practice; (e) Subjective users' comfort and measured results; (f) Practical implementation; (g) economic and ecological assessment; (h) Solar architecture; (i) Heat supply. It was considered particularly favourable that passive solar buildings do not only offer a solution to ecological problems but also a growing market. [German] Der Tagungsband der '4. Passivhaus Tagung', die von 10. bis 11. Maerz 2000 in Kassel stattgefunden hat, beinhalten Beitraege, die in acht Arbeitsgruppen vorgetragen worden: (a) Planer-Werkstatt; (b) Architektur; (c) Lueftungsplanung; (d) Baupraxis; (e) Wohnerfahrung, Messergebnisse; (f) Umsetzung; (g) oekonomische und oekologische Bewertung; (h) Solararchitektur; (i) Waermeversorgung. Es wird vom Herausgeber als besonders erfreulich herausgestellt, dass durch eine erfolgreiche Passivhaus-Entwicklung neben der Loesung der Klimaprobleme zugleich ein neuer Wachstumsmarkt geschaffen werde, der mit einer Mehrung von Wertschoepfung und Wohlstand verbunden ist. (AKF)

Synthesis, Characterization and Spectral Studies of Noble Heterobinuclear Complexes of Transition Metal Ions and their Biological Activity

Directory of Open Access Journals (Sweden)

Netra Pal Singh

2011-01-01

Full Text Available Some noble heterobinuclear complexes of transition metal ions with bis(salicylaldehydemalonyl-dihydrazone in the presence of 5-nitroindazole Cu(II / Ni(II- chloride of the type [ML1M‘L2Cl2] or [ML1FeL2Cl2]Cl, where M = Ni(II, Cu(II and M' = Mn(II, Co(II, have been prepared. All the complexes have been characterized by IR, UV vis and EPR spectroscopy, elemental analysis, magnetic moment and molar conductance measurement. Spectral studies and magnetic moment measurement in DMF suggest the covalent nature of the complexes, except the [ML1FeL2Cl2]Cl complex which is 1:1 electrolyte. An octahedral geometry is proposed for M‘ and square planer for M for the heterobinuclear complexes. The low value of magnetic moment and overlapping EPR signals are due to spin crossover since both of the metals have unpaired electrons with same molecular symmetry. The lowering of the magnetic moment has been discussed. The biological activity (antifungal and antibacterial of the represented compounds has been studied.

Planning of biogas plants. A question of co-operation and negotiation; Planering av biogasanlaeggningar. En fraaga om samverkan och foerhandling

Energy Technology Data Exchange (ETDEWEB)

Khan, Jamil

2003-04-01

During the last years there has been an increased interest in Sweden to build biogas reactors. The planning of a biogas plant brings about the need for co-operation between a variety of actors. Furthermore, there are a number of different issues that need to be dealt with. To build a biogas plant is thus a rather complicated thing to do. The aim of this report is to increase the knowledge about the processes that precede a decision to build a biogas plant, in order to try to facilitate the planning of future projects. The report is based on case studies of the planning of two biogas plants in Sweden and the empirical material consists of interviews with key persons as well as written documents. In the study, three parallel processes are identified and analysed, which are all crucial to carry through a project. These are the project planning process, the political process and the application process. The most important result of the study is that there is not only one way to carry through a project and that the choice of strategy depends on the character of the project and the different questions that need to be handled. Examples of other results are: the importance of an early and continuous dialogue with the political leadership, the necessity to build an organisation for the co-operation between key actors and that the project leaders should be flexible and open to changes in the project throughout the planning process.

Planering och genomförandet av en leende-kampanj för de anställda på Esbo IKEA

OpenAIRE

Hietanen, Laura

2013-01-01

Kundservice är viktigt för ett företags framgång och därför bör de investera i det. Då kundernas upplevelser överrensstämmer med de förväntningar de haft för företaget kommer de mer sannolikt att komma tillbaka och berätta om upplevelserna till personer i sin omgivning. De anställda har en avgörande roll i detta sammanhang. De kan med sitt agerande inverka både positivt samt negativt på synen på kundservicenivån i företaget. Syftet med detta examensarbete är att planera samt genomföra en leen...

Das Re-entry von Kritik: Assemblageforschung nach der Kritik an der Kritik. Kommentar zu Alexa Färbers „Potenziale freisetzen“

Directory of Open Access Journals (Sweden)

Hanna Göbel

2014-05-01

Full Text Available Der Kommentar zum Beitrag von Alexa Färber diskutiert eine Vermengung von drei unterschiedlichen Kritikbegriffen sowie Orten von Kritik in der aktuellen Debatte um die Assemblageforschung im Feld der Urban Studies. Ich rekonstruiere und unterscheide zwischen einem Kritikbegriff als theoretischer Norm, wie er von der (neo-marxistischen Stadt- und Raumforschung vertreten wird, und der ontologischen Kritik dieser Norm seitens der Assemblageforscher_innen. Alexa Färbers Beitrag zeigt drittens exemplarisch eine sich einschleichende normative Ebene in der Assemblageforschung auf, die bislang als Kritikform unterbelichtet geblieben ist. Diese wird als Wiedereinführung (re-entry von empirisch vollzogener Kritik in die Assemblageforschung bezeichnet. Damit ist eine theoretische Neupositionierung von Kritik ‚innerhalb’ einer Assemblage gemeint, indem Kritik nicht mehr als theoretische Norm ‚außerhalb’ zu verorten ist. In diesem Kommentar plädiere ich dafür, in der Assemblageforschung eine differenzierte Auseinandersetzung mit unterschiedlichen Begriffen und Orten von Kritik zu pflegen, um innerhalb der Urban Studies und für interessierte städtische Akteure mit urbaner Expertise (u.a. Architekt_innen, Planer_innen, Künstler_innen, Aktivist_innen, Kultur- und Sozialarbeiter_innen, DIY-Gemeinschaften klarer adressierbar zu sein.

Limits of applicability in NDT inspections. Practical examples; Grenzen der Anwendbarkeit bei ZfP-Pruefungen. Beispiele aus der Praxis

Energy Technology Data Exchange (ETDEWEB)

Sodeikat, Christian [Ingenieurbuero Schiessl Gehlen Sodeikat GmbH, Muenchen (Germany); Lohse, Carsten [Bewehrungsnachweis und -analyse, Augustusburg (Germany)

2016-05-01

Property owners, developers, architects, planners and in many cases courts require further information regarding the state of existing and under construction buildings. In order to avoid concerns on the building structure and to avoid nuisance by noise and dirt and ultimately save costs, structural inspection should be carried out as non-destructive. NDT methods, however, always have application limits that can be very different depending on the methods used and test equipment. However, not every inspection task, the implementation of which customer want, can be solved with NDT methods. The following article presents practical examples of application limits of different NDT methods. [German] Eigentuemer, Bauherren, Architekten, Planer und vielfach auch Gerichte benoetigen weitergehende Informationen bzgl. des Zustands bestehender und auch im Bau befindlicher Bauwerke. Um die Bausubstanz nicht zu beeintraechtigen, Belaestigungen durch Laerm und Dreck zu vermeiden und letztlich Kosten zu sparen, sollen Bauwerksuntersuchungen moeglichst zerstoerungsfrei durchgefuehrt werden. ZfP-Verfahren weisen jedoch immer Anwendungsgrenzen auf, die je nach eingesetzten Verfahren und Pruefgeraeten sehr unterschiedlich sein koennen. Jedoch kann nicht jede Pruefaufgabe, deren Umsetzung sich Auftraggeber wuenschen, mit ZfP-Verfahren geloest werden. Der nachfolgende Beitrag stellt Praxisbeispiele fuer Anwendungsgrenzen verschiedener ZfP-Verfahren dar.

Family of Quantum Sources for Improving Near Field Accuracy in Transducer Modeling by the Distributed Point Source Method

Directory of Open Access Journals (Sweden)

Dominique Placko

2016-10-01

Full Text Available The distributed point source method, or DPSM, developed in the last decade has been used for solving various engineering problems—such as elastic and electromagnetic wave propagation, electrostatic, and fluid flow problems. Based on a semi-analytical formulation, the DPSM solution is generally built by superimposing the point source solutions or Green’s functions. However, the DPSM solution can be also obtained by superimposing elemental solutions of volume sources having some source density called the equivalent source density (ESD. In earlier works mostly point sources were used. In this paper the DPSM formulation is modified to introduce a new kind of ESD, replacing the classical single point source by a family of point sources that are referred to as quantum sources. The proposed formulation with these quantum sources do not change the dimension of the global matrix to be inverted to solve the problem when compared with the classical point source-based DPSM formulation. To assess the performance of this new formulation, the ultrasonic field generated by a circular planer transducer was compared with the classical DPSM formulation and analytical solution. The results show a significant improvement in the near field computation.

Removal of unwanted fluid

Science.gov (United States)

Subudhi, Sudhakar; Sreenivas, K. R.; Arakeri, Jaywant H.

2013-01-01

This work is concerned with the removal of unwanted fluid through the source-sink pair. The source consists of fluid issuing out of a nozzle in the form of a jet and the sink is a pipe that is kept some distance from the source pipe. Of concern is the percentage of source fluid sucked through the sink. The experiments have been carried in a large glass water tank. The source nozzle diameter is 6 mm and the sink pipe diameter is either 10 or 20 mm. The horizontal and vertical separations and angles between these source and sink pipes are adjustable. The flow was visualized using KMnO4 dye, planer laser induced fluorescence and particle streak photographs. To obtain the effectiveness (that is percentage of source fluid entering the sink pipe), titration method is used. The velocity profiles with and without the sink were obtained using particle image velocimetry. The sink flow rate to obtain a certain effectiveness increase dramatically with lateral separation. The sink diameter and the angle between source and the sink axes don't influence effectiveness as much as the lateral separation.

The energetics of tetrahydrocarbazole aromatization over Pd(111): A computational analysis

Science.gov (United States)

Crawford, P.; Burch, R.; Hardacre, C.; Hindle, K. T.; Hu, P.; Rooney, D. W.

2008-03-01

The carbazole moiety is a component of many important pharmaceuticals including anticancer and anti-HIV agents and is commonly utilized in the production of modern polymeric materials with novel photophysical and electronic properties. Simple carbazoles are generally produced via the aromatization of the respective tetrahydrocarbazole (THCZ). In this work, density functional theory calculations are used to model the reaction pathway of tetrahydrocarbazole aromatization over Pd(111). The geometry of each of the intermediate surface species has been determined and how each structure interacts with the metal surface addressed. The reaction energies and barriers of each of the elementary surface reactions have also been calculated, and a detailed analysis of the energetic trends performed. Our calculations have shown that the surface intermediates remain fixed to the surface via the aromatic ring in a manner similar to that of THCZ. Moreover, the aliphatic ring becomes progressively more planer with the dissociation of each subsequent hydrogen atom. Analysis of the reaction energy profile has revealed that the trend in reaction barriers is determined by the two factors: (i) the strength of the dissociating ring-H bond and (ii) the subsequent gain in energy due to the geometric relaxation of the aliphatic ring.

Microstructure anisotropy and its effect on mechanical properties of reduced activation ferritic/martensitic steel fabricated by selective laser melting

Science.gov (United States)

Huang, Bo; Zhai, Yutao; Liu, Shaojun; Mao, Xiaodong

2018-03-01

Selective laser melting (SLM) is a promising way for the fabrication of complex reduced activation ferritic/martensitic steel components. The microstructure of the SLM built China low activation martensitic (CLAM) steel plates was observed and analyzed. The hardness, Charpy impact and tensile testing of the specimens in different orientations were performed at room temperature. The results showed that the difference in the mechanical properties was related to the anisotropy in microstructure. The planer unmelted porosity in the interface of the adjacent layers induced opening/tensile mode when the tensile samples parallel to the build direction were tested whereas the samples vertical to the build direction fractured in the shear mode with the grains being sheared in a slant angle. Moreover, the impact absorbed energy (IAE) of all impact specimens was significantly lower than that of the wrought CLAM steel, and the IAE of the samples vertical to the build direction was higher than that of the samples parallel to the build direction. The impact fracture surfaces revealed that the load parallel to the build layers caused laminated tearing among the layers, and the load vertical to the layers induced intergranular fracture across the layers.

Synthesis and characterization of porous silicon gas sensors

Science.gov (United States)

abbas, Roaa A.; Alwan, Alwan M.; Abdulhamied, Zainab T.

2018-05-01

In this work, photo-electrochemical etching process of n-type Silicon of resistivity(10 Ω.cm) and (100) orientation, using two illumination sources IR and violet wavelength in HF acid have been used to produce PSi gas detection device. The fabrication process was carried out at a fixed etching current density of 25mA/cm2 and at different etching time (5, 10, 15 and 20) min and (8, 16, 24, and 30) min. Two configurations of gas sensor configuration planer and sandwich have been made and investigated. The morphological properties have been studied using SEM,the FTIR measurement show that the (Si-Hx) and (Si-O-Si) absorption peak were increases with increasing etching time,and Photoluminescence properties of PSi layer show decrease in the peak of PL peak toward the violet shift. The gas detection process is made on the CO2 gas at different operating temperature and fixed gas concentration. In the planner structure, the gas sensing was measured through, the change in the resistance readout as a function to the exposure time, while for sandwich structure J-V characteristic have been made to determine the sensitivity.

Offshore wind power - Possibilities and shortcomings in the planning and design; Vindkraft till havs - Moejligheter och brister vid planering och projektering

Energy Technology Data Exchange (ETDEWEB)

Andre, Daniel

2010-02-15

The purpose of this report is to examine how the planning preparedness offshore unfolds. Planning conditions of municipalities have been investigated through interviews with municipal planners and representatives of the wind power stakeholders. At the same time, the problems and deficiencies that impede the expansion of offshore wind power have been identified. In the report, based on the survey of the state of planning, as well as the shortcomings of current systems, the Swedish National Board of Housing, Building and Planning presents opportunities for improvements. With these proposals the Swedish National Board of Housing, Building and Planning opens up for an increased cooperation with the aim to facilitate a future expansion of offshore wind power. The report primarily addresses central government agencies and authorities, county councils, as well as planners or other officers of the national, regional and municipal levels

Partial county development plans as a means for preserving wild reindeer habitats in Norway

Directory of Open Access Journals (Sweden)

Hans Olav Bråtå

2008-06-01

Full Text Available Norwegian wild reindeer habitats are threatened by human intervention. Wild reindeer habitats are joint region wide common pool resources (CPR. Municipalities may be free-riders to that resource if they prefer investments boosting municipal economy despite negative consequences for wild reindeer as a regional resource. Partial county development plans, following the rules of the Planning and Building Act (PBA, are a means that may combine preservation of habitats and development. In order to analyze such plans, theory on CPR management is applied to spatial development planning in the Rondane and Hardangervidda wild reindeer areas. It is shown that the nested system is in accordance with most of Ostrom’s principles. Still, a joint Planning Board ought to be established at Hardangervidda and a partial county plan for the whole wild reindeer area there ought to be established. It is recommended that regular monitoring of interventions and planning is established. Finally, a system or mechanism for low cost conflict resolution is needed; but is not easily included into a system based on official actors at different levels, the planning and building act and public anticipation on equal management. The last point is important for mutual acceptance of restrictions on own activity. Abstract in Norwegian / Sammendrag:Kunnskap om forvaltning av fellesressurer øker forståelsen av regionale planer for villreinområderNorske villreinområder er truet av menneskelige inngrep. Villreinområdene er en regional fellesressurs, men kommunene kan bli gratispassasjerer i forhold til utnytting av denne ressursen ettersom de kan bli fristet til å vektlegge utbygging som gir lokaløkonomiske effekter, på tross av negative konsekvenser for villreinen som en regional ressurs. Fylkesdelplaner, som er basert på plan- og bygningsloven, er et virkemiddel som kan kombinere bevaring og utvikling. For å forstå slike planers muligheter og begrensninger analyses her

Seal of quality for planners of geothermal energy installations, prize for geothermal installations; Guetesiegel fuer Planer von Geothermieanlagen, Geothermiepreis Phase I (2002)

Energy Technology Data Exchange (ETDEWEB)

Eugster, W. J. [Polydynamics Engineering Zuerich, Zuerich (Switzerland); Eberhard, M. [Eberhard and Partner AG, Aarau (Switzerland); Koschenz, M. [EMPA, Duebendorf (Switzerland); Morath, M. [Lippuner and Partner AG, Grabs (Switzerland); Rohner, E. [Engeo AG, Arnegg (Switzerland)

2003-07-01

This final report for the Swiss Federal Office for Energy describes a project that aimed to improve the awareness of planners and installers involved in geothermal energy projects for the problems encountered when dimensioning both large and small geothermal installations, and to provide the basic knowledge necessary for a correct sizing of such plants. The report's main emphasis is placed on three types of geothermal plant, bore-hole heat exchangers, groundwater use and energy pile installations. The concept of the training programme involved is described, which is to issue certificates and labels for the attainment of three levels of ability. These three levels (Labels A, B and C) cover simple, small plants for heating operation, medium sized plants within a heating capacity range of 30 to approximately 100 kW and large plants for heating and cooling operation with heat capacities greater than 100 kW, respectively. The report also includes details of the time-line aimed for and costs. Also, the idea of an annual prize for geothermal installations is briefly discussed.

Na-metasomatism in the uranium fields of Singhbhum Shear zone, India

International Nuclear Information System (INIS)

Chaki, Anjan

2013-01-01

Singhbhum Shear Zone (SSZ) of eastern India hosts uranium, copper and apatite-magnetite mineralization, which occurs either independently or overlaps in space. SSZ is a nearly 200 km long, 1-5 km wide, intensely techtonized, northward-convex, arcuate mobile belt that separates the Archaean cratonic nucleus to its south from the Proterozoic North Singhbhum Fold Belt on the north. Except Bagjata mines in the eastern sector, majority of the known uranium deposits and mines (e.g. Jaduguda, Bhatin, Narwapahar, Banduhurang and Mohuldih) are situated in the central sector of the shear zone. All the deposits are of low grade (0.05% U 3 O 8 ) and low to medium tonnage. The common rock types of the SSZ are quartz-chlorite schists, quartzsericite schists, quartzite, metaconglomerate, soda granite, quartz-albite bearing schists/gneisses, granophyres and tourmalinite. The mineralization occur as lenticular to tabular bodies, which are (pene-) concordant with dominant planer structures, i.e. foliation parallel with the lithological layering (S 3 II S 0 ). Principal uranium mineral is uraninite with low thorium (UO 2 /ThO 2 =70-150), high lead (PbO =14-15%) and moderate REE contents with minor pitchblende and some secondary minerals near the surface. Many ore minerals, particularly the sulfide phases of Ni, Co, Mo, Cu and Fe are common

City/industry/utility partnership leads to innovative combined heat and power project

Energy Technology Data Exchange (ETDEWEB)

Savage, J. [Savage and Associates, Quesnel, BC (Canada)

2010-07-01

This presentation discussed a combined heat and power (CHP) project that was launched in Quesnel, British Columbia. The CHP is being developed in phases in which new components will enter the system, providing added benefits. Hot oil from a sawmill bioenergy system will be used to heat lumber kilns, generate electricity at an Organic Rankine Cycle co-generation plant, and heat water for a District Energy Loop (DEL) to heat up to 22 existing buildings in the city as well as sawmill and planer buildings. The DEL piping would comprise a 5 kilometre loop. The energy would come from recovered sawmill space heating, recovered stack energy, and additional biomass energy. All of the district heating and 41 per cent of the power would be from heat recovered from the existing industrial operation. This bio-economy vision ultimately involves incorporating a biogas digester into the system to process food, regional organic waste, and pulp mill residuals, relying on bio-solids and heat from the mill. The fertilizer from the digester would then be used in a biomass plantation, which would provide materials to industry for many products, including bio-refining. This project evolved in response to concerns about the ecological effects and long-term economics of aggressive utilization of forest biomass. 15 figs.

Two-dimensional Cu2Si sheet: a promising electrode material for nanoscale electronics

Science.gov (United States)

Meng Yam, Kah; Guo, Na; Zhang, Chun

2018-06-01

Building electronic devices on top of two-dimensional (2D) materials has recently become one of most interesting topics in nanoelectronics. Finding high-performance 2D electrode materials is one central issue in 2D nanoelectronics. In the current study, based on first-principles calculations, we compare the electronic and transport properties of two nanoscale devices. One device consists of two single-atom-thick planar Cu2Si electrodes, and a nickel phthalocyanine (NiPc) molecule in the middle. The other device is made of often-used graphene electrodes and a NiPc molecule. Planer Cu2Si is a new type of 2D material that was recently predicted to exist and be stable under room temperature [11]. We found that at low bias voltages, the electric current through the Cu2Si–NiPc–Cu2Si junction is about three orders higher than that through graphene–NiPc–graphene. Detailed analysis shows that the surprisingly high conductivity of Cu2Si–NiPc–Cu2Si originates from the mixing of the Cu2Si state near Fermi energy and the highest occupied molecular orbital of NiPc. These results suggest that 2D Cu2Si may be an excellent candidate for electrode materials for future nanoscale devices.

Sing English: Om sangens potensial i engelskopplæringen

Directory of Open Access Journals (Sweden)

Ragnhild Elisabeth Lund

2012-03-01

Full Text Available Sang er en åpenbar kilde til læring av fremmedspråk. Læreplaner for engelskfaget opp gjennom tidene har påpekt dette, og læreverkene i engelsk inneholder mange sanger. Men nøyaktig hva er det sang kan bidra med? Hva slags sanger er tatt med i bøkene, og hvilke målsettinger ser ut til å være knyttet til dem? Artikkelen besvarer disse spørsmålene ved å vise til læreplaner og utvalgte lærebøker fra perioden 1885 – 2008 og hvordan de legger opp til at sang skal brukes som en del av opplæringen i engelsk. Undersøkelsen er begrenset til ungdomstrinnet. Innledningsvis refererer artikkelen til ulike begrunnelser for bruk av sang i fremmedspråkopplæringen. Når sang nevnes i læreplanene eller innlemmes i lærebøkene, reflekteres enkelte av disse begrunnelsene. Samtidig er det påfallende hvor ofte planer og bøker ikke begrunner bruken av sang eller setter sangene inn i en didaktisk sammenheng. Artikkelen konkluderer derfor med at sanger ser ut til å representere et stort, men delvis uutnyttet potensial i engelskopplæringen på ungdomstrinnet.

Laser cutting system in bridge fabricating line; Kyoryo seisaku line ni okeru laser no setsudan system

Energy Technology Data Exchange (ETDEWEB)

Kitaguchi, Y.; Yokotani, K. [Hitachi Zosen Corp., Osaka (Japan)

1994-11-01

This paper describes the laser cutting system established at a new advanced plant that was constructed by Hitachi Shipbuilding and Engineering Co., Ltd. in 1993. At the plant, the cutting line consists of four NC cutting lines: the plasma cutting machine, gas cutting machine, frame planer, and laser cutting machine. The laser cutting machine is used to cut complex shapes of relatively thin (6 - 16 mm) materials with high accuracy. The machine consists of a 3 kW CO2 laser oscillator mounted gantry type NC cutter and a slat conveyor of about 30 m long, with the maximum cutting width of 3.6 m. The NC cutting machine is provided with the automatic printing function using NC data, marking function, scheduled operation function, steel plate detector, and coordinate rotation function, etc. These functions enable unattended operation of the machine to cut multiple materials. This NC laser cutting line has the same performance data collection function for data during the operating time as other production lines. Therefore, the NC laser cutting line can be subjected to the realtime centralized control together with the other lines. All these technologies have provided high accuracy and efficiency for production as well as an environment in which many female operators can successfully work. 10 figs., 4 tabs.

Mach Number effects on turbulent superstructures in wall bounded flows

Science.gov (United States)

Kaehler, Christian J.; Bross, Matthew; Scharnowski, Sven

2017-11-01

Planer and three-dimensional flow field measurements along a flat plat boundary layer in the Trisonic Wind Tunnel Munich (TWM) are examined with the aim to characterize the scaling, spatial organization, and topology of large scale turbulent superstructures in compressible flow. This facility is ideal for this investigation as the ratio of boundary layer thickness to test section spanwise extent ratio is around 1/25, ensuring minimal sidewall and corner effects on turbulent structures in the center of the test section. A major difficulty in the experimental investigation of large scale features is the mutual size of the superstructures which can extend over many boundary layer thicknesses. Using multiple PIV systems, it was possible to capture the full spatial extent of large-scale structures over a range of Mach numbers from Ma = 0.3 - 3. To calculate the average large-scale structure length and spacing, the acquired vector fields were analyzed by statistical multi-point methods that show large scale structures with a correlation length of around 10 boundary layer thicknesses over the range of Mach numbers investigated. Furthermore, the average spacing between high and low momentum structures is on the order of a boundary layer thicknesses. This work is supported by the Priority Programme SPP 1881 Turbulent Superstructures of the Deutsche Forschungsgemeinschaft.

High figure-of-merit SOI power LDMOS for power integrated circuits

Directory of Open Access Journals (Sweden)

Yashvir Singh

2015-06-01

Full Text Available The structural modifications in the conventional power laterally diffused metal-oxide-semiconductor field-effect transistor (LDMOS are carried out to improve the breakdown voltage, on-resistance, gate-charge and figure-of-merits of the device with reduced cell pitch. The modified device has planer structure implemented on silicon-on-insulator which is suitable for low to medium voltage power integrated circuits. The proposed LDMOS consists of two gate electrodes placed vertically in two separate trenches build in the drift region and single source and drain contacts are taken on the top. The trench structure reduces the electric field inside the drift region and allow increased drift layer doping concentration leading to higher breakdown voltage, lower specific on-resistance, reduced gate-drain charge, and substantial improvement in the figure-of-merits. Using two-dimensional simulations, the performance of the proposed LDMOS is optimized and results are compared with the conventional LDMOS. Our simulation results show that the proposed device exhibits 110% higher breakdown voltage, 40% reduction in cell pitch, 19% lower specific on-resistance, 30% lower gate-to-drain charge leading to 5.5 times improvement in Baliga's figure-of-merit and 43% reduction in dynamic figure-of-merit over the conventional device.

Crystal structure, thermochromic and magnetic properties of organic-inorganic hybrid compound: (C7H7N2S)2CuCl4

Science.gov (United States)

Vishwakarma, Ashok K.; Kumari, Reema; Ghalsasi, Prasanna S.; Arulsamy, Navamoney

2017-08-01

The synthesis, thermal analysis, crystal structure and magnetic properties of (2-aminobenzothiazolium)2CuCl4, organic-inorganic hybrid compound, have been described. The compound crystallizes in the monoclinic space group P21/c with two formula units in a unit cell of dimensions a = 6.9522(4) Å, b = 9.6979(4) Å, c = 13.9633(6) Å, β = 97.849(3)° and volume 930.83(8) Å3 at 150(2) K. The structure consists of isolated nearly square planer [CuC14]2- units, with somewhat longer than normal Cusbnd Cl bond lengths [Cusbnd Cl (average) = 2.2711 Å]. The magnetic measurements of (2-aminobenzothiazolium)2CuCl4 using SQUID magnetometer show paramagnetic nature of the compound. Thermal measurements (TG-DTA and DSC) on this compound showed reversible phase transition at 83 °C. This transition is accompanied by the reversible change in colour of the prismatic crystal from green to dark brown, thermochromic behaviour. Temperature dependent EPR measurements on powdered sample ascertain change in coordination sphere around Cu(II) with shift in g|| = 2.150 and g⊥ = 2.071 at room temperature, typical of square planar, to g|| = 2.201 and g⊥ = 2.182 at 170 °C, typical of distorted tetrahedral geometry.

Structural, theoretical and corrosion inhibition studies on some transition metal complexes derived from heterocyclic system

Science.gov (United States)

Gupta, Shraddha Rani; Mourya, Punita; Singh, M. M.; Singh, Vinod P.

2017-06-01

A Schiff base, (E)-N‧-((1H-indol-3-yl)methylene)-2-aminobenzohydrazide (Iabh) and its Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes have been synthesized. These compounds have been characterized by different physico-chemical and spectroscopic tools (UV-Vis, IR, NMR and ESI-Mass). The molecular structure of Iabh is determined by single crystal X-ray diffraction technique. The ligand Iabh displays E-configuration about the >Cdbnd N- bond. The structure of ligand is stabilized by intra-molecular H-bonding. In all the metal complexes the ligand coordinates through azomethine-N and carbonyl-O resulting a distorted octahedral geometry for Mn(II), Co(II) and Cu(II) complexes in which chloride ions occupy axial positions. Ni(II) and Zn(II) complexes, however, form 4-coordinate distorted square planer and tetrahedral geometry around metal ion, respectively. The structures of the complexes have been satisfactorily modeled by calculations based on density functional theory (DFT) and time dependent-DFT (TD-DFT). The corrosion inhibition study of the compounds have been performed against mild steel in 0.5 M H2SO4 solution at 298 K by using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). They show appreciable corrosion inhibition property.

Honeycomb-like thin films of polystyrene-block-poly(2-vinylpyridine) embedded with gold or silver nanoparticles formed at the planer liquid/liquid interface.

Science.gov (United States)

Wang, Di; Ma, Huihui; Chu, Chunxiao; Hao, Jingcheng; Liu, Hong-Guo

2013-07-15

Composite thin films of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) decorated with Au or Ag nanoclusters and nanoparticles were fabricated at the interfaces of chloroform solution of PS-b-P2VP and aqueous solutions of HAuCl4 or AgNO3. Transmission electron microscopy (TEM) investigations indicated that large area of a single-layer honeycomb structure was formed, which is composed of polygons (most of them are hexagons) whose walls look like spindles with the length of several hundreds of nanometers. Large amount of Au or Ag nanoparticles are embedded in the walls and the undersides of the honeycomb structures. The formation of these novel composite structures was attributed to the adsorption of block copolymer molecules and inorganic species of AuCl4(-) and Ag(+) ions at the liquid-liquid interface, the combination of the polymer molecules and the inorganic ions, and the self-assembly of the composite molecules. After UV-light irradiation and KBH4 aqueous solution treatment, the inorganic species were reduced completely, as confirmed by UV-vis spectra and X-ray photoelectron spectra. These composite films exhibited high catalytic activities for the reduction of 4-nitrophenol (4-NP) by KBH4 in aqueous solutions. Copyright © 2013 Elsevier Inc. All rights reserved.

Health service planning and sustainable development: considering what, where and how care is delivered through a pro-environmental lens.

Science.gov (United States)

Desmond, Sharon

2017-03-02

The aim of the present paper was to review the opportunities currently available to health service planners to advance sustainable development in their future-facing roles within health service organisation. Critical challenges and enablers to facilitate health services planners in adopting a pro-environmental lens are discussed. What is known about the topic? Despite its harmful effect on the environment, health has been slower than other industries to embrace the sustainable development agenda. The attitudes and knowledge base of health service planners with regard to environmental sustainability has not been widely studied. For health service planners, embracing pro-environmental considerations in sustainable model of care development is a powerful opportunity to review care paradigms and prepare for the implementation of meaningful, improved health and system efficiency. What does this paper add? This paper advances the case for health service planners to embrace a pro-environmental stance and guides health service leaders in the preparation and implementation of sustainable and improved health and system efficiency. What are the implications for practitioners? Health service planers are in an ideal position to champion the sustainable development agenda as they explore what care is delivered, how care is delivered and where care is delivered. External policy, health service leadership and carbon literacy are advanced as critical contextual factors to facilitate the key role that health service planners can play in building sustainable healthcare organisations.

COLLAGE 2: a numerical code for radionuclide migration through a fractured geosphere in aqueous and colloidal phases

International Nuclear Information System (INIS)

Grindrod, P.; Cooper, N.

1993-05-01

In previous work, the COLLAGE code was developed to model the impacts of mobile and immobile colloidal material upon the dispersal and migration of a radionuclide species within a saturated planer fracture surrounded by porous media. The adsorption of radionuclides to colloid surfaces was treated as instantaneous and reversible. In this report we present a new version of the code, COLLAGE 2. Here the adsorption of radionuclides to the colloidal material is treated via first order kinetics. The flow and geometry of the fracture remain as in the previous model. The major effect of colloids upon the radionuclide species is to adsorb them within the fracture space and thus exclude them from the surrounding porous medium. Thus the matrix diffusion process, a strongly retarding effect, is exchanged for a colloid capture/release process by which adsorbed nuclides are also retarded. The effects of having a colloid-radionuclide kinetic interaction include the phenomena of double pulse breakthrough (the pseudo colloid population followed by the solute plume) in cases where the desorption process is slow and the pseudo colloids are highly mobile. Some example calculations are given and some verification examples are discussed. Finally a complete listing of the code is presented as an appendix, including the subroutines allowing for the numerical inversion of the Laplace transformed solution via Talbot's method. 6 figs

COLLAGE 2: a numerical code for radionuclide migration through a fractured geosphere in aqueous and colloidal phases

Energy Technology Data Exchange (ETDEWEB)

Grindrod, P.; Cooper, N. [Intera Information Technologies Ltd., Henley-on-Thames (United Kingdom)

1993-05-01

In previous work, the COLLAGE code was developed to model the impacts of mobile and immobile colloidal material upon the dispersal and migration of a radionuclide species within a saturated planer fracture surrounded by porous media. The adsorption of radionuclides to colloid surfaces was treated as instantaneous and reversible. In this report we present a new version of the code, COLLAGE 2. Here the adsorption of radionuclides to the colloidal material is treated via first order kinetics. The flow and geometry of the fracture remain as in the previous model. The major effect of colloids upon the radionuclide species is to adsorb them within the fracture space and thus exclude them from the surrounding porous medium. Thus the matrix diffusion process, a strongly retarding effect, is exchanged for a colloid capture/release process by which adsorbed nuclides are also retarded. The effects of having a colloid-radionuclide kinetic interaction include the phenomena of double pulse breakthrough (the pseudo colloid population followed by the solute plume) in cases where the desorption process is slow and the pseudo colloids are highly mobile. Some example calculations are given and some verification examples are discussed. Finally a complete listing of the code is presented as an appendix, including the subroutines allowing for the numerical inversion of the Laplace transformed solution via Talbot`s method. 6 figs.

Uptake and transport of positron-emitting tracer in plants

Energy Technology Data Exchange (ETDEWEB)

Kume, Tamikazu; Matsuhashi, Shinpei; Shimazu, Masamitsu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; and others

1997-03-01

The transport of a positron-emitting isotope introduced into a plant was dynamically followed by a special observation apparatus called `Positron-Emitting Tracer Imaging System`. In the system, annihilation {gamma}-rays from the positron emitter are detected with two planer detectors (5 x 6 cm square). The water containing ca. 5 MBq/ml of {sup 18}F was fed to the cut stem of soybean for 2 min and then the images of tracer activity were recorded for 30 - 50 min. When the midrib of a leaf near the petiole was cut just before measurement, the activity in the injured leaf was decreased but detected even at the apex. This result suggests that the damaged leaf recovered the uptake of water through the lamina. Maximum tracer activities in leaves of unirradiated plant were observed within 10 min, whereas those of irradiated plant at 100 Gy were observed after over 25 min. The final activity of irradiated plant after 30 min was lower than that of unirradiated plant. In case of beans, there was a difference in the absorption behavior of the {sup 18}F-labeled water between unirradiated and irradiated samples. These results show that the system is effective to observe the uptake and transportation of water containing positron emitting tracer for the study of damage and recovery functions of plants. (author)

Cren(ulation)-­1,2 Preshot Report

Energy Technology Data Exchange (ETDEWEB)

Rousculp, Christopher L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Oro, David Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Griego, Jeffrey Randall [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bradley, Joseph Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hollander, Brian J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reinovsky, Robert Emil [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-12-21

There is great interest in the behavior of the free surface of tin under shock loading. While it is known that meso-scale surface imperfections can seed the RichtmyerMeshkov Instability (RMI) for a surface that is melted on release, much less is known about a tin surface that is solid, but plastically deforming. Here material properties such as shear and yield strength come into play especially in converging geometry. Previous experiments have been driven by direct contact HE. Usually a thin, flat target coupon is fielded with various single-mode, sinusoidal, machined, profiles on the free surface. The free surface is adjacent to either vacuum or an inert receiver gas. Most of these previous driver/target configurations have been nominal planer geometry. With modern HE it has been straightforward to shock tin into melt on release. However it has been challenging to achieve a low enough pressure for solid state on release. Here we propose to extend the existing base of knowledge to include the behavior of the free surface of tin in cylindrical converging geometry. By shock loading a cylindrical tin shell with a magnetically driven cylindrical liner impactor, the free surface evolution can be diagnosed with proton radiography. With the PHELIX capacitor bank, the drive can easily be varied to span the pressure range to achieve solid, mixed, and liquid states on release.

Effective use of pre-job briefing as tool for the prevention of human error

International Nuclear Information System (INIS)

Schlump, Ansgar

2015-01-01

There is a fundamental demand to minimise the risks for workers and facilities while executing maintenance work. To ensure that facilities are secure and reliable, any deviation from normal operation behaviour has to be avoided. Accurate planning is the basis for minimising mistakes and making work more secure. All workers involved should understand how the work should be done and what is expected to avoid human errors. Especially in nuclear power plants, the human performance tools (HPT) have proved to be an effective instrument to minimise human errors. These human performance tools consist of numerous different tools that complement each other (e.g. pre-job briefing). The safety culture of the plants is also characterised by these tools. The choice of using the right HP-Tool is often a difficult task for the work planer. On the one hand, he wants to avoid mistakes during the execution of work but on the other hand he does not want to irritate the workers with unnecessary requirements. The proposed concept uses a simple risk analysis to take into account the complexity of the task, the experience of the past and the consequences of failure in to account. One main result of this risk analysis is a recommendation of the detailing of the pre-job briefing, to reduce the risks for the involved staff to a minimum.

Role of lattice inhomogeneities on the electronic properties of selenium deficient Bi2Se3

Science.gov (United States)

Tayal, Akhil; Kumar, Devendra; Lakhani, Archana

2017-11-01

Inter-layer coupling is widely considered to play a crucial role in tuning electronic properties of 3D topological insulators. The aim of this study is to evaluate the role of crystallographic defects on inter-layer coupling in the Se deficient Bi2Se3 (0 0 3) crystal using extended x-ray absorption fine structure spectroscopy (EXAFS) technique. EXAFS measurements at Se-K and Bi-L3 edges reveal distinct local geometry around these atomic sites. It has been observed that short inter-layer Bi-Se and Se-Se bonds emerge in the sample. This additional structural motif coexists with the conventional crystallographic arrangement. Within the quintuple layer Bi-Se bonds are preserved with slight compression in intra-planer Bi-Bi and Se-Se distance and overall reduction in c/a ratio. These findings suggest formation of deformed lattice region, localized and dispersed inhomogeneously within the sample. Such inhomogeneities have also resulted in interesting transport properties such as quantum Hall effect (QHE), large linear magnetoresistance and π-Berry phase in Shubnikov-de Haas (SdH) oscillations of bulk crystals. Detailed analyses of magnetotransport measurements suggest that tuning of inter-layer coupling by local lattice deformation is the key factor for unusual transport properties. Role of axial strain, and stacking faults generated due to defects and charged Se vacancies are discussed to understand the observed electronic properties.

The assessment of whole body bone SPECT in oncology

International Nuclear Information System (INIS)

Scortechini, Shonika

2009-01-01

Full text: Objectives: To assess the significance and practicability of oncology whole body bone SPECT as part of the standard skeletal survey and its impact on the traditional planar whole body bone imaging protocol. Method: Three consenting oncology patients were injected with a standard adult dose of Tc-99m MOP. Delayed Imaging of whole body sweep and SPECT acquisitions were performed on a Siemens Symbia T6. The patient was positioned supine with arms down with a SPECT scan length covering vortex to thighs. SPECT data was reconstructed and a single whole body zipped file created. Normal SPECT slices along with a cine/MIP of the zipped data were created for review. Results: Both image data sets were reviewed to assess if SPECT provided any further diagnostic clinical information not apparent in planer imaging. In our limited review, whole body SPECT did not add extra value to the planar whole body scans performed; it did however demonstrate vertebral involvement with greater resolution. The processing software and system limitations in seamlessly knitting data sets (creating image artefacts) was a major limiting factor in not pursuing further studies. Conclusion: Both imaging techniques offer differing advantages and limitations, however due to image artefact in the triple knitted SPECT approach with current software technology, it cannot be substituted for whole body imaging at this time.

Effective use of pre-job briefing as tool for the prevention of human error; Effektive Nutzung der Arbeitsvorbesprechung als Werkzeug zur Vermeidung von Fehlhandlungen

Energy Technology Data Exchange (ETDEWEB)

Schlump, Ansgar [KLE GmbH, Lingen (Germany). Kernkraftwerk Emsland

2015-06-15

There is a fundamental demand to minimise the risks for workers and facilities while executing maintenance work. To ensure that facilities are secure and reliable, any deviation from normal operation behaviour has to be avoided. Accurate planning is the basis for minimising mistakes and making work more secure. All workers involved should understand how the work should be done and what is expected to avoid human errors. Especially in nuclear power plants, the human performance tools (HPT) have proved to be an effective instrument to minimise human errors. These human performance tools consist of numerous different tools that complement each other (e.g. pre-job briefing). The safety culture of the plants is also characterised by these tools. The choice of using the right HP-Tool is often a difficult task for the work planer. On the one hand, he wants to avoid mistakes during the execution of work but on the other hand he does not want to irritate the workers with unnecessary requirements. The proposed concept uses a simple risk analysis to take into account the complexity of the task, the experience of the past and the consequences of failure in to account. One main result of this risk analysis is a recommendation of the detailing of the pre-job briefing, to reduce the risks for the involved staff to a minimum.

Automation of radiation treatment planning. Evaluation of head and neck cancer patient plans created by the Pinnacle{sup 3} scripting and Auto-Planning functions

Energy Technology Data Exchange (ETDEWEB)

Speer, Stefan; Weiss, Alexander; Bert, Christoph [Universitaetsklinikum Erlangen, Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Department of Radiation Oncology, Erlangen (Germany); Klein, Andreas [EKS Engineering GmbH, Fuerth (Germany); Kober, Lukas [Strahlentherapie Tauber-Franken, Bad Mergentheim (Germany); Yohannes, Indra [Rinecker Proton Therapy Center, Munich (Germany)

2017-08-15

Tumore behandeln und gleichzeitig die Risikoorgane schonen. Dennoch ist die Planungsqualitaet abhaengig von individuellem Geschick, Erfahrung und persoenlichen Vorlieben des Planers. Vorteilhaft waere daher ein automatisierter Planungsprozess. Das Bestrahlungsplanungssystem Pinnacle{sup 3} (Philips Healthcare, Hamburg, Deutschland) ermoeglicht dies mit einer internen Scripting-Funktion oder dem Auto-Planning-(AP-)Modul. Die Ergebnisse des AP-Moduls wurden mit denen von intern erstellten Skripten und manuellen Bestrahlungsplaenen verglichen. Um die Planqualitaet zu beurteilen, wurden mehrere Behandlungsparameter bewertet (optimaler Plan = 100 Punkte). Alle Patienten wurden initial von verschiedenen Physikern manuell und anschliessend scriptbasiert oder mit AP erneut geplant. Skriptbasierte HNO-Plaene erzielten im Mittel 67,0 Punkte und waren manuell geplanten (59,1 Punkte) und AP-Faellen (62,3 Punkte) im Durchschnitt ueberlegen. Zudem zeigten sie eine hohe Reproduzierbarkeit und damit einhergehend eine geringere Standardabweichung der Planparameter. Sogar weniger erfahrenem Personal ist es moeglich, bei geringerem Zeitbedarf zumindest einen guten Ausgangspunkt fuer weitere Nachoptimierungen zu erzeugen. Erfahrene Planer schneiden allerdings bei einigen Plaenen besser ab als Skript oder AP. Beim ersten Erstellen von Skripten oder AP-Templates sind Vorgaben von erfahrenen Nutzern noetig. Weiterer Nachteil ist z. B. ein Anstieg der Monitoreinheiten (Skript-Plaene +35,5%). Insgesamt ist die automatische Planung der manuellen im Durchschnitt ueberlegen. Einzelne Plaene gelingen erfahrenem Personal besser als Skript oder AP. Der groesste Nutzen besteht somit bei Zeitmangel und unerfahrenem Personal. (orig.)

Gate Tunable Transport in Graphene/MoS2/(Cr/Au Vertical Field-Effect Transistors

Directory of Open Access Journals (Sweden)

Ghazanfar Nazir

2017-12-01

Full Text Available Two-dimensional materials based vertical field-effect transistors have been widely studied due to their useful applications in industry. In the present study, we fabricate graphene/MoS2/(Cr/Au vertical transistor based on the mechanical exfoliation and dry transfer method. Since the bottom electrode was made of monolayer graphene (Gr, the electrical transport in our Gr/MoS2/(Cr/Au vertical transistors can be significantly modified by using back-gate voltage. Schottky barrier height at the interface between Gr and MoS2 can be modified by back-gate voltage and the current bias. Vertical resistance (Rvert of a Gr/MoS2/(Cr/Au transistor is compared with planar resistance (Rplanar of a conventional lateral MoS2 field-effect transistor. We have also studied electrical properties for various thicknesses of MoS2 channels in both vertical and lateral transistors. As the thickness of MoS2 increases, Rvert increases, but Rplanar decreases. The increase of Rvert in the thicker MoS2 film is attributed to the interlayer resistance in the vertical direction. However, Rplanar shows a lower value for a thicker MoS2 film because of an excess of charge carriers available in upper layers connected directly to source/drain contacts that limits the conduction through layers closed to source/drain electrodes. Hence, interlayer resistance associated with these layers contributes to planer resistance in contrast to vertical devices in which all layers contribute interlayer resistance.

Usefulness of diffusion-weighted MRI in differentiating benign from malignant musculoskeletal tumors

International Nuclear Information System (INIS)

Nagata, Shuji; Uchida, Masafumi; Hayabuchi, Naofumi

2005-01-01

The purpose of this study was to evaluate the usefulness of diffusion-weighted MRI in distinguishing different components and in differentiating benign from malignant musculoskeletal tumors. Fifty-seven patients with musculoskeletal tumors underwent MR at our institution from October 1999 to April 2002. We evaluated 57 tumors (9 bone tumors and 48 soft tissue tumors). All tumors were classified into 8 groups (myxomatous, fibrous, cystic, cartilaginous, fatty components, hematomas, other benign tumors, and other malignant tumors). MR examinations were performed with a 1.5-Tesla system. Diffusion-weighted single-shot echo planer imaging (EPI) images were obtained in all patients. Apparent diffusion coefficients (ADCs) were calculated by using b factors of 0 and 1,000 sec/mm 2 . ADC values of myxomatous, cystic, and cartilaginous components were significantly higher than those of other tumors. In cartilaginous tumors, malignant tumor ADC values (2.33±0.44) were higher than those of benign tumors (2.13±0.13). However, there was no significant difference between benign and malignant tumors. Except for high-intensity components on T1-weighted imaging and low or homogeneously very high intensity components on T2-weighted imaging, there was a significant difference in ADC between malignant (1.35±0.40) and benign (1.97±0.50) tumors. Within the limited number of cases, there was a significant difference in ADC between malignant and benign tumors. (author)

Evaluation of different physical parameters that affect the clinical image quality for gamma camera by using different radionuclides

International Nuclear Information System (INIS)

Salah, F.A.; Ziada, G.; Hejazy, M.A.; Khalil, W.A.

2008-01-01

Some scintillation camera manufactures adhere to standard code of performance specification established by National Electric Manufactures Association (NEMA). Items such as differential and integral uniformity, spatial resolution energy resolution, etc. are all calculated with reproducible methodology that allows the user reliable technique for creation of these standards to avoid any lack of clinical service that may violate the ethics of patient care. Because 99m Tc is the most frequently used radionuclide in nuclear medicine, many clinics perform the daily uniformity and weekly resolution checks using this radionuclide. But when other commonly used radionuclide such as Tl-201,Ga-67 and I-131 are used, no standardized quality control is performed. So in these study we perform to evaluate the response of ADAC(digital) gamma camera and SELO(analogue) gamma camera to four radionuclide (Tl-201,Ga-67, I-131, and 99m Tc) flood image acquired using different non-uniformity correction tables. In the planer study uniformity and resolution images were obtained using ADAC and SELO cameras, linearity was obtained only by ADAC camera, while in the SPECT study uniformity and contrast images were obtained using ADAC camera only. The response for using different non-uniformity correction tables acquired using different isotopes was different from gamma camera model to another. We can conclude that the most of the gamma camera quality control parameters (uniformity, resolution and contrast) are influenced by variation in the correction tables, while other parameters not affected by this variation like linearity. (author)

Gate Tunable Transport in Graphene/MoS₂/(Cr/Au) Vertical Field-Effect Transistors.

Science.gov (United States)

Nazir, Ghazanfar; Khan, Muhammad Farooq; Aftab, Sikandar; Afzal, Amir Muhammad; Dastgeer, Ghulam; Rehman, Malik Abdul; Seo, Yongho; Eom, Jonghwa

2017-12-28

Two-dimensional materials based vertical field-effect transistors have been widely studied due to their useful applications in industry. In the present study, we fabricate graphene/MoS₂/(Cr/Au) vertical transistor based on the mechanical exfoliation and dry transfer method. Since the bottom electrode was made of monolayer graphene (Gr), the electrical transport in our Gr/MoS₂/(Cr/Au) vertical transistors can be significantly modified by using back-gate voltage. Schottky barrier height at the interface between Gr and MoS₂ can be modified by back-gate voltage and the current bias. Vertical resistance (R vert ) of a Gr/MoS₂/(Cr/Au) transistor is compared with planar resistance (R planar ) of a conventional lateral MoS₂ field-effect transistor. We have also studied electrical properties for various thicknesses of MoS₂ channels in both vertical and lateral transistors. As the thickness of MoS₂ increases, R vert increases, but R planar decreases. The increase of R vert in the thicker MoS₂ film is attributed to the interlayer resistance in the vertical direction. However, R planar shows a lower value for a thicker MoS₂ film because of an excess of charge carriers available in upper layers connected directly to source/drain contacts that limits the conduction through layers closed to source/drain electrodes. Hence, interlayer resistance associated with these layers contributes to planer resistance in contrast to vertical devices in which all layers contribute interlayer resistance.

Investigation of Surface Phenomena in Shocked Tin in Converging Geometry

Energy Technology Data Exchange (ETDEWEB)

Rousculp, Christopher L. [Los Alamos National Laboratory; Oro, David Michael [Los Alamos National Laboratory; Griego, Jeffrey Randall [Los Alamos National Laboratory; Turchi, Peter John [Los Alamos National Laboratory; Reinovsky, Robert Emil [Los Alamos National Laboratory; Bradley, Joseph Thomas [Los Alamos National Laboratory; Cheng, Baolian [Los Alamos National Laboratory; Freeman, Matthew Stouten [Los Alamos National Laboratory; Patten, Austin Randall [Los Alamos National Laboratory

2016-03-21

There is great interest in the behavior of the free surface of tin under shock loading. While it is known that meso-scale surface imperfections can seed the Richtmyer- Meshkov Instability (RMI) for a surface that is melted on release, much less is known about a tin surface that is solid, but plastically deforming. Here material properties such as shear and yield strength come into play especially in converging geometry. Previous experiments have been driven by direct contact HE. Usually a thin, flat target coupon is fielded with various single-mode, sinusoidal, machined, profiles on the free surface. The free surface is adjacent to either vacuum or an inert receiver gas. Most of these previous driver/target configurations have been nominal planer geometry. With modern HE it has been straightforward to shock tin into melt on release. However it has been challenging to achieve a low enough pressure for solid state on release. Here we propose to extend the existing base of knowledge to include the behavior of the free surface of tin in cylindrical converging geometry. By shock loading a cylindrical tin shell with a magnetically driven cylindrical liner impactor, the free surface evolution can be diagnosed with proton radiography. With the PHELIX capacitor bank, the drive can easily be varied to span the pressure range to achieve solid, mixed, and liquid states on release. A conceptual cylindrical liner and target is shown in Figure 1.

Behavioral determinants of cardiovascular diseases risk factors: A qualitative directed content analysis.

Science.gov (United States)

Sabzmakan, Leila; Morowatisharifabad, Mohammad Ali; Mohammadi, Eesa; Mazloomy-Mahmoodabad, Seid Saied; Rabiei, Katayoun; Naseri, Mohammad Hassan; Shakibazadeh, Elham; Mirzaei, Masoud

2014-03-01

The PRECEDE model is a useful tool for planers to assess health problems, the behavioral and environmental causes of the problems, and their determinants. This study aims to understand the experiences of patients and health care providers about the behavioral causes of cardiovascular diseases (CVDs) risk factors and their determinants. This qualitative study utilized content analysis approach based on the PRECEDE model. The study was conducted for over 6 months in 2012 at the diabetes units of health centers associated with Alborz University of Medical Sciences, which is located in Karaj, Iran. Data were collected using individual semi-structured interviews with 50 patients and 12 health care providers. Data analysis was performed simultaneously with data collection using the content analysis directed method. Stress, unhealthy eating, and physical inactivity were the behaviors, which predict the risk factors for CVD. Most of the patients considered stress as the most important underlying cause of their illness. In this study, 110 of the primary codes were categorized into seven subcategories, including knowledge, attitude, perceived susceptibility, severity, perceived benefits, barriers, and self-efficacy, which were located in the predisposing category of the PRECEDE model. Among these determinants, perceived barriers and self-efficacy for the mentioned behaviors seemed to be of great importance. Identifying behavioral determinants will help the planners design future programs and select the most appropriate methods and applications to address these determinants in order to reduce risky behaviors.

Energy-optimised planning and operation of UPS installations. Guidelines for planners and operators; Energieoptimierte Planung und Betrieb von USV-Anlagen. Ein Leitfaden fuer Planer und Betreiber

Energy Technology Data Exchange (ETDEWEB)

Neyer, A.; Schnyder, G.; Mauchle, P.

2004-09-15

This comprehensive brochure elaborated for the Swiss Federal Office of Energy (SFOE) is one of a set of nine reports that provide an overall review of the energy-efficiency of UPS systems. This brochure for planners and operators of UPS installations takes a look at how UPS installations can be optimised in order to reduce losses and to provide optimal operation as far as energy efficiency is concerned. The brochure explains the various types of UPS systems and their use and gives tips on ordering. Operational modes, load considerations, system configuration and specifications for putting to tender are looked at, as are the requirements to be placed on the systems for optimal operation. Basic rules for planning activities are quoted. Finally, rotating UPS installations and dynamic energy storage are briefly looked at. The paper is completed with checklists and a quality/energy-matrix.

Using a set of strategic indicator systems as a decision-making support implement for establishing a recycling-oriented society. A Taiwanese case study.

Science.gov (United States)

Chang, I-Cheng; Lu, Li-Teh; Lin, Shiann-Shan

2005-01-01

husbandry sector) the fishery sector has the highest EE, which indicates that the fishery activities and resources significantly influence the sustainability of the economic-environmental system of the sample city. Furthermore, according to a consensus achieved in ESIS, local green spaces, resource recovery, energy consumption pattern change, freshwater conservation and greenhouse effect abatement were considered as the five crucial issues influencing how the case study city can develop into an ES-city. The rate of local green spaces, resource recycling, freshwater conservation and the rate of reduction of nonrenewable energy use as well as carbon dioxide (CO2) emissions were used to evaluate the above five issues. This case study is unparalleled in Taiwan. Even in Japan, where ROS legislation has been implemented, this kind of study remains in the preliminary stages. Furthermore, when communicating the indicator results, it is essential to provide the context and countermeasures of the crucial issues that are faced. The two sub-indicator systems proposed in this case study could comply completely with the above-mentioned requirements. For example, the EEIS provides information for achieving a balance between environmental burden and economic benefits among dominant production sectors; the ESIS provides information for setting strategies for overcoming the crucial issues faced. This study recommends that urban planers should consider the construction of the corresponding strategic indicator system to be indispensable, and makes further use of the indicator results related to the environmental education of residents for identifying and promoting participation with ROS, and turning them into implements for supporting urban SD decision-making. Furthermore, a successful indicator system depends on data availability and quality. This study recommends that urban planers should pay considerable attention to constructing relevant data collection channels, databases and the data

Effects of annealing temperature on mechanical durability of indium-tin oxide film on polyethylene terephthalate substrate

International Nuclear Information System (INIS)

Machinaga, Hironobu; Ueda, Eri; Mizuike, Atsuko; Takeda, Yuuki; Shimokita, Keisuke; Miyazaki, Tsukasa

2014-01-01

Effects of the annealing temperature on mechanical durability of indium-tin oxide (ITO) thin films deposited on polyethylene terephthalate (PET) substrates were investigated. The ITO films were annealed at the range from 150 °C to 195 °C after the DC sputtering deposition for the production of polycrystalline ITO layers on the substrates. The onset strains of cracking in the annealed ITO films were evaluated by the uniaxial stretching tests with electrical resistance measurements during film stretching. The results indicate that the onset strain of cracking in the ITO film is clearly increased by increasing the annealing temperature. The in-situ measurements of the inter-planer spacing of the (222) plane in the crystalline ITO films during film stretching by using synchrotron radiation strongly suggest that the large compressive stress in the ITO film increases the onset strain of cracking in the film. X-ray stress analyses of the annealed ITO films and thermal mechanical analyses of the PET substrates also clarifies that the residual compressive stress in the ITO film is enhanced with increasing the annealing temperature due to the considerably larger shrinkage of the PET substrate. - Highlights: • Indium-tin oxide (ITO) films were deposited on polyethylene terephthalate (PET). • Mechanical durability of the ITO is improved by high temperature post-annealing. • The shrinkage in the PET increases with rising the post-annealing temperature. • The shrinkage of the PET enhances the compressive stress in the ITO film. • Large compressive stress in the ITO film may improve its mechanical durability

L E E guide on electric power supply in high rise buildings. tot. rev. ed.; L E E. Leitfaden Elektrische Energie im Hochbau

Energy Technology Data Exchange (ETDEWEB)

Hennings, D.; Hinz, E.; Steinmueller, B.; Grossklos, M.

2000-07-01

Energy policy aiming at sustainability must take account of the noxious effects of fossil fuels. This guide will help to solve this problem. It is an easy to handle tool for integral planning and optimisation of electric power supply in administrative and office buildings, with a standard projecting procedure, a method for improving electric systems in buildings on the basis of characteristic values, and hints for planning and optimisation. It addresses builder owners and investors as well as architects, planners, engineers and energy consultants all of whom may be concerned in the planning of a building and its technical facilities. [German] Eine am Ziel der Nachhaltigkeit orientierte Energiepolitik muss Konsequenzen draus ziehen, dass der Einsatz der fossilen Energietraeger, auf denen unsere Energieversorgung bisher basiert, mit schaedlichen Umweltauswirkungen verbunden ist. Kohlendioxid und andere klimarelevante Spurengase heizen die Erdatmosphaere auf und drohen zur Klimakatastrophe zu fuehren; Stickoxid und Schwefeldioxid belasten mit dem sauren Regen Boden, Gewaesser und ganze Oekosysteme. Der vorliegende Leitfaden 'Elektrische Energie im Hochbau' will hier Abhilfe schaffen. Er stellt ein gut zu handhabendes Werkzeug dar, mit dessen Hilfe eine integrale Planung und Optimierung des rationellen Einsatzes elektrischer Energie in Dienstleistungsgebaeuden moeglich ist. Inhalte des Leitfadens sind die Darstellung des Planungsablaufs, ein Kennwertverfahren zur Verwertung und Verbesserung von elektrischen Anwendungen im Gebaeudebereich als Massnahme zur Investitions- und Betriebskostenreduzierung sowie Hinweise fuer Planung und Optimierung. Der Leitfaden richtet sich sowohl an die Bauherren bzw. Investoren als auch die an der Gebaeude- und Technikplanung Beteiligten, also die Architekten, Planer, Ingenieure und Energieberater. (orig.)

Parameters of quality of the woodworkability for determination of different usage of Eucalyptus wood

Directory of Open Access Journals (Sweden)

José Reinaldo Moreira da Silva

2009-03-01

Full Text Available Wood products used in the furniture industry need to have wood work machine surfaces quality optimized andpatronized. There are some classification methods to determine the wood quality, including visual inspection, determination of theadvance per tooth (fz, rugosimeter and laser or just touching. After the wood classification it is determined the usage of the differentwood qualities. The empiricism of the quality parameters in the indication of uses is not always ideal. This study determined the qualityof surfaces of Eucalyptus flat wood and defined appropriate uses for the different quality classes obtained. It had been worked machinedifferent Eucalyptus samples by planer with speed of advance of 3,6,15 and 30 m*min-1. To classify the wood, the determination of theadvance per tooth (calculated fz and measured fz and the visual qualification (ASTMD 1666-87, 1995 were used. Later the woodusage according to quality was determined. The percentage of good samples decreased as the speed advance increased: reaching92%, 69%, 0% and 0% for advance speed of 3,6,15 and 30 m*min-1 respectively. Samples prepared at the speed of 3 and 6 m*min-1 were used to fabricate furniture, cabinet frame and thresholds. About 54%of samples prepared at the speed of 15 m*min-1 were usedfor railing, lambris, structural panels and flooring. About 46% and 100% of samples prepared at the speed of 15 and 30 m*min-1,respectively, were used to fabricate dividers, trusses, fences and, or, exterior gates.

Cross-sectional imaging with rotational panoramic X-ray machine for preoperative assessment of dental implant site. Comparisons of imaging properties with conventional film tomography and computed tomography

International Nuclear Information System (INIS)

Makihara, Masahiro; Nishikawa, Keiichi; Kuroyanagi, Kinya

2001-01-01

To clarify the validity of cross-sectional imaging with rotational panoramic x-ray machine for preoperative assessment of the dental implant site, the imaging properties were compared with those of spiral tomography and multi-planer reconstruction (MPR) manipulation of x-ray computed tomography. Cross-sectional imaging of the maxilla and mandible of an edentulous dry skull was performed by each technique at an image layer thickness of 1 mm. Steel spheres were used to identify cross-sectional planes and measure distance. Six oral radiologists scored the image clarity of structures with 5-grade rating scales and measured the distance between images of 2 steel spheres. Each measured distance was divided by the magnification factor. The actual distance was also measured on the skull. The score and the distance were statistically compared. The Spearman's rank correlation coefficients for the score and the absolute values of the difference in distances measured by different observers were calculated as test units to compare inter-observer agreements statistically. The same observation and measurement were repeated to compare intra-observer agreement. Image clarity of the linear tomography available with a panoramic machine was comparable to spiral tomography and superior to MPR, except for the cortical bone on the lingual side. The inter- and intra-observer agreements were comparable. The accuracy for measurement of distance, the inter- and intra-observer agreements were also comparable to the spiral tomography and superior to those of MPR. Therefore, it is concluded that cross-sectional imaging with a rotational panoramic x-ray machine is useful for preoperative assessment of the dental implant site. (author)

Effects of the technique of cryopreservation and dilution/centrifugation after thawing on the motility and vitality of spermatozoa of oligoasthenozoospermic men.

Science.gov (United States)

Esteves, Sandro C; Spaine, Deborah M; Cedenho, Agnaldo P; Srougi, Miguel

2003-01-01

Comparing in human semen samples with low initial quality, the effects of 2 techniques of cryopreservation and dilution/centrifugation after thawing on the spermatic motility and vitality. Semen samples from 15 oligo and/or asthenozoospermic individuals assisted in the infertility sector of a tertiary hospital were obtained through masturbation. The samples were divided into 2 portions of equal volume, and diluted (1:1; v/v) with the cryoprotector containing glycerol (Test yolk buffer). One portion was frozen through the technique of liquid nitrogen vapor with static phases (group I - GI), while the other was frozen through a programmable biological freezer with linear speed (Planer, Kryo 10, series III) (group II - GII). The following parameters were assessed before freezing and after thawing: percentage of spermatozoa with progressive motility (Prog%) and percentage of live spermatozoa (Vit%). After defrosting, Prog% was assessed before and after removal of cryoprotector diluent, in different time intervals (zero, 3 h, and 24 h). The statistical analysis has been accomplished by using the non-parametric tests of Wilcoxon and Friedman. There was significant reduction of Prog% and Vit% from before freezing to after defrosting in both groups, I and II (p live spermatozoa with progressive motility. The effects of dilution and centrifugation to remove the cryoprotector had a negative impact only in samples frozen through the automated technique. In both techniques, progressive motility is kept constant during the first 3 hours after thawing and removal of the cryoprotector, but is drastically diminished by the end of an incubation period of 24 hours.

Quality of the surface of Coffea arabica wood

Directory of Open Access Journals (Sweden)

Pedro Paulo de Carvalho Braga

2014-03-01

Full Text Available The wood of Coffea arabica L. is considered a a residue of the coffee industry and is widely used as a source of energy. Few studies have shown other destinations such as the manufacture of small objects and furniture with rustic design. The objective of this work was to find the best fit in cutting speed during machining planer trowel the wood of Coffea arabica, taking into consideration the quality of the machined surface. The wood from the Coffea arabica came from an 15 years planting, spacing 3 x 2 m, of the municipality of Machado / MG. The tree was pruned, unfolded and flattened, in order for getting cut-proof of 30 mm thick, with variables length and width. The machining tests were performed at the Laboratory of Wood Machining (DCF / UFLA, varying the cutting speed in plane trowel. The qualification of the machined surface was performed by the feed per tooth (fz, visual analysis (ASTM D 1666-87 and roughness Ra and Rz. It was used a completely randomized design with 30 repetitions. We conducted the analysis of variance test and the average of Scott-Knott, at 5% significance level. It was calculated the percentage of marks obtained for the feed per tooth. The results showed that the quality of machined surface with cutting speeds of 19 and 21 m∙s-1 and forward speed of 6 m∙min-1 were satisfactory with small surveys of fiber and low values of feed per tooth ( fz and roughness Ra and Rz.

Evaluation of efficiency of a semiconductor gamma camera eZ-SCOPE AN

International Nuclear Information System (INIS)

Wang Xinqiang; Wang Wei; Zhu Jiarui; Zhao Wenrui

2004-01-01

Objective: To study the basic performance of a compact semiconductor gamma camera (eZ-SCOPE AN) which is constructed using cadmium zinc telluride (CdZnTe) detectors with identical numbers of pixels. Each of the semiconductors sized 2 mm x 2 mm is located in 16 matrix x 16 matrix. The view field is 32 mm x 32 mm. Methods: Using a quality-control phantom, the eZ-SCOPE AN was evaluated. The specific performance characteristics were evaluated as shown below referring to National Electrical Manufacturers Association (NEMA) standards. 1) Intrinsic energy resolution. 2) Intrinsic count rate performance 3) Integral uniformity. 4) System planar sensitivity. 5) Special system resolution. Results: The intrinsic energy resolution [full width at half maximum (FWHM)] was 5.07%. It was failed to determine the maximal intrinsic count rate and the 20% count loss rate with a point source of 37 MBq because the plateau was not reached while using the solutions measured. The integral uniformity was 3.84% with the high sensitivity collimator. The system planer sensitivity was 20 988 counts·min -1 ·MBq -1 with high resolution collimator and 61 090 counts·min -1 ·MBq -1 with high sensitivity collimator. The special system resolution (FWHM) was 2.2 mm when the distance between the source and the collimator was 0 mm and it was 5.7 mm when the distance was 30 mm. Conclusion: This device is of high resolution and high sensitivity and is a reliable tool to investigate radioactivity biodistribution in small organs and small animals. (authors)

Diffusion tensor analysis with nuclear magnetic resonance in human central nervous system

International Nuclear Information System (INIS)

Nakayama, Naoki

1998-01-01

Nuclear magnetic resonance has been used to measure the diffusivity of water molecules. In central nervous system, anisotropic diffusion, which is characterized by apparent diffusion tensor D app ξ , is thought to be related to neuronal fiber tract orientation. For precise observation of anisotropic diffusion, it is needed to determine the diagonal and off-diagonal elements of D app ξ . Once D app ξ is estimated from a series of diffusion weighted images, a tissue's orthotropic principal axes and diffusivity of each direction are determined from eigenvalues and eigenvectors of D app ξ . There are several methods to represent anisotropic diffusion with D app ξ . Examples are diffusion ellipsoids constructed in each voxel depicting both these principal axes and the mean diffusion length in these directions, trace invariant values and its mapping image, largest eigenvalue, and ratio of largest eigenvalue to the other eigenvalue. In this study, the author investigated practical procedure to analyze diffusion tensor D app ξ using both of spin-echo end echo-planer diffusion weighted imagings with 3-tesla magnetic resonance machine in human brain. The ellipsoid representation provided particularly useful information about microanatomy including neuronal fiber tract orientation and molecular mobility reflective of microstructure. Furthermore, in the lesion of Wallerian degeneration, the loss of anisotropy of local apparent diffusion was observed. It is suggested that the function of axons can be observed via degree of anisotropy of apparent diffusion. Consequently, diffusion tensor analysis is expected to be a powerful, noninvasive method capable of quantitative and functional evaluation of the central nervous system. (author)

Synthesis of green nano iron particles (GnIP) and their application in adsorptive removal of As(III) and As(V) from aqueous solution

Energy Technology Data Exchange (ETDEWEB)

Prasad, Kumar Suranjit, E-mail: suranjit@gmail.com [Department of Environmental Studies, Faculty of Science, The M. S. University of Baroda, Vadodara, 390002, Gujarat (India); Gandhi, Pooja, E-mail: poojagandhi.3090@gmail.com [Department of Environmental Sciences, Ashok and Rita Patel Institute of Integrated Study and Research in Biotechnology and Allied Sciences (ARIBAS), New Vallabh Vidyanagar, Anand, Gujarat, 388121 (India); Selvaraj, Kaliaperumal, E-mail: k.selvaraj@ncl.res.in [Nano and Computational Materials Lab, Catalysis Division, National Chemical Laboratory, Council of Scientific and Industrial Research, Pune, 411008 (India)

2014-10-30

Graphical abstract: - Highlights: • Colloidal GnIP synthesised using extract of Mint leaves were entrapped in chitosan beads. • GnIP loaded beads were employed for removal of As ions, showed excellent removal efficiency. • Iron and chitosan are cost effective materials hence can be a good adsorbent for removal of arsenic. - Abstract: The present study reports a new approach to synthesise nano iron particles using leaf extract of Mint (Mentha spicata L.) plant. The synthesised GnIPs were subjected to detailed adsorption studies for removal of arsenite and arsenate from aqueous solution of defined concentration. Iron nanoparticles synthesised using leaf extract showed UV–vis absorption peaks at 360 and 430 nm. TEM result showed the formation of polydispersed nanoparticles of size ranging from 20 to 45 nm. Nanoparticles were found to have core–shell structure. The planer reflection of selected area electron diffraction (SAED) and XRD analysis suggested that iron particles were crystalline and belonged to fcc (face centred cubic) type. Energy-dispersive X-ray analysis (EDAX) shows that Fe was an integral component of synthesised nanoparticles. The content of Fe in nanoparticles was found to be 40%, in addition to other elements like C (16%), O (19%) and Cl (23%). FT-IR study suggested that functional groups like -NH, -C=O, -C=N and -C=C were involved in particle formation. The removal efficiency of GnIP-chitosan composite for As(III) and As(V) was found to be 98.79 and 99.65%. Regeneration of adsorbent suggested that synthesised green GnIP may work as an effective tool for removal of arsenic from contaminated water.

Mixed alkali neodymium orthoborates: K_9Li_3Nd_3(BO_3)_7 and A_2LiNd(BO_3)_2 (A = Rb, Cs)

International Nuclear Information System (INIS)

Chen, Pengyun; Xia, Mingjun; Li, Rukang

2016-01-01

Crystals of mixed alkali neodymium orthoborates, K_9Li_3Nd_3(BO_3)_7 and A_2LiNd(BO_3)_2 (A = Rb, Cs) were obtained by spontaneous crystallization. K_9Li_3Nd_3(BO_3)_7 crystallizes in space group P2/c with cell parameters of a = 11.4524(7) Aa, b = 10.1266(6) Aa, c = 12.3116 (10) Aa, β = 122.0090(10) . In the structure, NdO_8 polyhedra share corners and connect with planer BO_3 groups to form infinite [Nd_3B_3O_2_1]_n chains. These chains are linked by additional BO_3 groups to produce a double layer of [Nd_6B_6O_3_8]_n blocks in the ac plane with K and Li ions filled into the cavities. A_2LiNd(BO_3)_2 (A = Rb, Cs) crystallizes in space group Pbcm, with cell parameters of a = 7.113(2) Aa, b = 9.691(3) Aa and c = 10.135(3) Aa for Rb_2LiNd(BO_3)_2, and a = 7.2113(3) Aa, b = 9.9621(4) Aa, and c = 10.3347(4) Aa for Cs_2LiNd(BO_3)_2. In the structure, NdO_8 polyhedra are corner-sharing with each other and further interlinked by BO_3 groups to comprise the infinite [Nd_4B_4O_2_4] sheets in the bc plane, with Rb/Cs and Li ions occupying the interlayered space. The compounds show effective near-IR emission and their associated lifetimes are obtained by fluorescence spectra. (Copyright copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Experimental Study of Thermal Field Evolution in the Short-Impending Stage Before Earthquakes

Science.gov (United States)

Ren, Yaqiong; Ma, Jin; Liu, Peixun; Chen, Shunyun

2017-08-01

Phenomena at critical points are vital for identifying the short-impending stage prior to earthquakes. The peak stress is a critical point when stress is converted from predominantly accumulation to predominantly release. We call the duration between the peak stress and instability "the meta-instability stage", which refers to the short-impending stage of earthquakes. The meta-instability stage consists of a steady releasing quasi-static stage and an accelerated releasing quasi-dynamic stage. The turning point of the above two stages is the remaining critical point. To identify the two critical points in the field, it is necessary to study the characteristic phenomena of various physical fields in the meta-instability stage in the laboratory, and the strain and displacement variations were studied. Considering that stress and relative displacement can be detected by thermal variations and peculiarities in the full-field observations, we employed a cooled thermal infrared imaging system to record thermal variations in the meta-instability stage of stick slip events generated along a simulated, precut planer strike slip fault in a granodiorite block on a horizontally bilateral servo-controlled press machine. The experimental results demonstrate the following: (1) a large area of decreasing temperatures in wall rocks and increasing temperatures in sporadic sections of the fault indicate entrance into the meta-instability stage. (2) The rapid expansion of regions of increasing temperatures on the fault and the enhancement of temperature increase amplitude correspond to the turning point from the quasi-static stage to the quasi-dynamic stage. Our results reveal thermal indicators for the critical points prior to earthquakes that provide clues for identifying the short-impending stage of earthquakes.

Synthesis of green nano iron particles (GnIP) and their application in adsorptive removal of As(III) and As(V) from aqueous solution

International Nuclear Information System (INIS)

Prasad, Kumar Suranjit; Gandhi, Pooja; Selvaraj, Kaliaperumal

2014-01-01

Graphical abstract: - Highlights: • Colloidal GnIP synthesised using extract of Mint leaves were entrapped in chitosan beads. • GnIP loaded beads were employed for removal of As ions, showed excellent removal efficiency. • Iron and chitosan are cost effective materials hence can be a good adsorbent for removal of arsenic. - Abstract: The present study reports a new approach to synthesise nano iron particles using leaf extract of Mint (Mentha spicata L.) plant. The synthesised GnIPs were subjected to detailed adsorption studies for removal of arsenite and arsenate from aqueous solution of defined concentration. Iron nanoparticles synthesised using leaf extract showed UV–vis absorption peaks at 360 and 430 nm. TEM result showed the formation of polydispersed nanoparticles of size ranging from 20 to 45 nm. Nanoparticles were found to have core–shell structure. The planer reflection of selected area electron diffraction (SAED) and XRD analysis suggested that iron particles were crystalline and belonged to fcc (face centred cubic) type. Energy-dispersive X-ray analysis (EDAX) shows that Fe was an integral component of synthesised nanoparticles. The content of Fe in nanoparticles was found to be 40%, in addition to other elements like C (16%), O (19%) and Cl (23%). FT-IR study suggested that functional groups like -NH, -C=O, -C=N and -C=C were involved in particle formation. The removal efficiency of GnIP-chitosan composite for As(III) and As(V) was found to be 98.79 and 99.65%. Regeneration of adsorbent suggested that synthesised green GnIP may work as an effective tool for removal of arsenic from contaminated water

Distortion-free diffusion tensor imaging for evaluation of lumbar nerve roots: Utility of direct coronal single-shot turbo spin-echo diffusion sequence.

Science.gov (United States)

Sakai, Takayuki; Doi, Kunio; Yoneyama, Masami; Watanabe, Atsuya; Miyati, Tosiaki; Yanagawa, Noriyuki

2018-06-01

Diffusion tensor imaging (DTI) based on a single-shot echo planer imaging (EPI-DTI) is an established method that has been used for evaluation of lumbar nerve disorders in previous studies, but EPI-DTI has problems such as a long acquisition time, due to a lot of axial slices, and geometric distortion. To solve these problems, we attempted to apply DTI based on a single-shot turbo spin echo (TSE-DTI) with direct coronal acquisition. Our purpose in this study was to investigate whether TSE-DTI may be more useful for evaluation of lumbar nerve disorders than EPI-DTI. First, lumbar nerve roots of five healthy volunteers were evaluated for optimization of imaging parameters with TSE-DTI including b-values and the number of motion proving gradient (MPG) directions. Subsequently, optimized TSE-DTI was quantitatively compared with conventional EPI-DTI by using fractional anisotropy (FA) values and visual scores in subjective visual evaluation of tractography. Lumbar nerve roots of six patients, who had unilateral neurologic symptoms in one leg, were evaluated by the optimized TSE-DTI. TSE-DTI with b-value of 400 s/mm 2 and 32 diffusion-directions could reduce the image distortion compared with EPI-DTI, and showed that the average FA values on the symptomatic side for six patients were significantly lower than those on the non-symptomatic side (P DTI might show damaged areas of lumbar nerve roots without severe image distortion. TSE-DTI might improve the reproducibility in measurements of FA values for quantification of a nerve disorder, and would become a useful tool for diagnosis of low back pain. Copyright © 2018 Elsevier Inc. All rights reserved.

Dual source and dual detector arrays tetrahedron beam computed tomography for image guided radiotherapy

Science.gov (United States)

Kim, Joshua; Lu, Weiguo; Zhang, Tiezhi

2014-02-01

Cone-beam computed tomography (CBCT) is an important online imaging modality for image guided radiotherapy. But suboptimal image quality and the lack of a real-time stereoscopic imaging function limit its implementation in advanced treatment techniques, such as online adaptive and 4D radiotherapy. Tetrahedron beam computed tomography (TBCT) is a novel online imaging modality designed to improve on the image quality provided by CBCT. TBCT geometry is flexible, and multiple detector and source arrays can be used for different applications. In this paper, we describe a novel dual source-dual detector TBCT system that is specially designed for LINAC radiation treatment machines. The imaging system is positioned in-line with the MV beam and is composed of two linear array x-ray sources mounted aside the electrical portal imaging device and two linear arrays of x-ray detectors mounted below the machine head. The detector and x-ray source arrays are orthogonal to each other, and each pair of source and detector arrays forms a tetrahedral volume. Four planer images can be obtained from different view angles at each gantry position at a frame rate as high as 20 frames per second. The overlapped regions provide a stereoscopic field of view of approximately 10-15 cm. With a half gantry rotation, a volumetric CT image can be reconstructed having a 45 cm field of view. Due to the scatter rejecting design of the TBCT geometry, the system can potentially produce high quality 2D and 3D images with less radiation exposure. The design of the dual source-dual detector system is described, and preliminary results of studies performed on numerical phantoms and simulated patient data are presented.

The Wind Power Handbook. Planning and approval of wind power plants on shore and in coastal areas; Vindkraftshandboken. Planering och proevning av vindkraftverk paa land och i kustnaera vattenomraaden

Energy Technology Data Exchange (ETDEWEB)

2009-01-15

The Wind Power Handbook is designed to make it easier for municipalities and wind energy companies to plan wind power projects. It contains the issues to be considered when planning and review, both the legal bases under essentially Planning and Building Act and the Environmental Code and the environmental assessments. The manual is primarily addressed to the municipalities and various operators. There are many interests to be met at a wind power establishment, which requires knowledge and cooperation of the different actors on the planning and approval process to be effective. Here we have gathered important knowledge base to facilitate the process and to contribute to a balanced decision

Reindeer husbandry and local planning

Directory of Open Access Journals (Sweden)

Lars P. Niia

1986-06-01

Full Text Available A central theme in the reindeer husbandry is the conflicts between this and other economic interests as tourism, community development etc. in connection with the utilization of common territory. A retrospective glance will show that this is an old problem and not a new phenomenon. The Nordic Sami Institute has carried out a research project with the following objectives: 1.to give an account of the terms of planning for the reindeer husbandry, 2.to find out how the Såmi (Lapp community's and so the reindeer husbandry's interests are taken into account in local planning. 3.find ways for how the reindeer husbandry's use of land can be described. 4.give suggestions as to how the interests of the Sami community can better be taken into account or how it can increase its influence in relation to planning. The suggestions based upon the results from the research project are: —that the Sami community aquire competence by preparing itself for the changes in its environment. —that it builds up its own organization. —that it aquires a more noticeable influence in community planning and decision making. This project and earlier experiencies have shown that the way of influencing e.g. by land-use-planning is weak and unreliable today.Renskötsel och kommunal planering.Abstract in Swedish / Sammandrag: Ett centralt tema i renskotselsammanhang ar konflikterna mellan renskotsel och andra ekonomiska intressen som turism, samhållsutbyggnad etc. vid utnyttjande av gemensamma arealer. En historisk tillbakablick visar att denna problematik inte på något sått år någon ny foreteelse utan ett gammalt tema med variationer i tid och rum. I ett forskningsprojekt vid Sami Instituhtta har en studie genomforts med syftet att: 1.soka beskriva planeringsforutsåttningarna for renskotseln. 2. soka forklara hur renskotselns intressen tas tillvara i den kommunala fysiska planeringen. 3. finna former for hur renskotselns markanvåndning kan beskrivas. 4. att l

Instrumental neutron activation analysis for coal

International Nuclear Information System (INIS)

Suzuki, Shohgo; Okada, Yukiko; Hirai, Shoji

1985-01-01

Various methods of neutron irradiation and of gamma-ray spectrometry were used in order to improve the detection sensitivity. Gamma-ray spactra of irradiated samples were collected by four methods, namely, spectrometry using a coaxial Ge(Li) detector, anticoincidence and coincidence counting spectrometries using a coaxial Ge(Li) detector and a well-type NaI(Tl) detector, and low energy photon spectrometry using a planer Ge detector (LEPS). Gamma-ray spectra obtained were analyzed by a peak-fitting procedure using a minicomputer system (GAMA system). Concentration of 35 elements (Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Br, Rb, Sr, Zr, Mo, Sb, Cs, Ba, La, Ce, Sm, Eu, Tb, Dy, Hf, Ta, W, Th and U) were determined by the combination of no-filter irradiation and spectrometry using a coaxial Ge(Li) detector that is conventionaly widely used. Concentrations of other 19 elements were determined by other combinations of irradiation and spectrometry. Mercury concentration was determined by the combination of no-filter irradiation and anticoincidence counting spectrometry. Concentrations of 7 elements (Cu, Nd, Gd, Ho, Tm, Yb and Lu) were determined by the combination of no-filter irradiation and LEPS. Concentrations of 3 elements (In, Ga and Ag) were determined by the combination of cadmium-filter irradiation and spectrometry using a coaxial Ge(Li) detector. Concentrations of 5 elements (Pr, Cd, Au, Te and Sn) were determined by the combination of cadmium-filter irradiation and anticoincidence counting spectrometry. Selenium concentration was determined by the combination of cadmium-filter irradiation and coincidence counting spectrometry. Silicon concentration was determined by the combination of boron-filter irradiation and spectrometry using a coaxial Ge(Li) detector. Iodine concentration was determined by the combination of boron-filter irradiation and anticoincidence counting spectrometry. (J.P.N.)

Design of the first optical system for real-time tomographic holography (RTTH)

Science.gov (United States)

Galeotti, John M.; Siegel, Mel; Rallison, Richard D.; Stetten, George

2008-08-01

The design of the first Real-Time-Tomographic-Holography (RTTH) optical system for augmented-reality applications is presented. RTTH places a viewpoint-independent real-time (RT) virtual image (VI) of an object into its actual location, enabling natural hand-eye coordination to guide invasive procedures, without requiring tracking or a head-mounted device. The VI is viewed through a narrow-band Holographic Optical Element (HOE) with built-in power that generates the largest possible near-field, in-situ VI from a small display chip without noticeable parallax error or obscuring direct view of the physical world. Rigidly fixed upon a medical-ultrasound probe, RTTH could show the scan in its actual location inside the patient, because the VI would move with the probe. We designed the image source along with the system-optics, allowing us to ignore both planer geometric distortions and field curvature, respectively compensated by using RT pre-processing software and attaching a custom-surfaced fiber-optic-faceplate (FOFP) to our image source. Focus in our fast, non-axial system was achieved by placing correcting lenses near the FOFP and custom-optically-fabricating our volume-phase HOE using a recording beam that was specially shaped by extra lenses. By simultaneously simulating and optimizing the system's playback performance across variations in both the total playback and HOE-recording optical systems, we derived and built a design that projects a 104x112 mm planar VI 1 m from the HOE using a laser-illuminated 19x16 mm LCD+FOFP image-source. The VI appeared fixed in space and well focused. Viewpoint-induced location errors were <3 mm, and unexpected first-order astigmatism produced 3 cm (3% of 1 m) ambiguity in depth, typically unnoticed by human observers.

Predicting use of case management support services for adolescents and adults living in community following brain injury: A longitudinal Canadian database study with implications for life care planning.

Science.gov (United States)

Baptiste, B; Dawson, D R; Streiner, D

2015-01-01

To determine factors associated with case management (CM) service use in people with traumatic brain injury (TBI), using a published model for service use. A retrospective cohort, with nested case-control design. Correlational and logistic regression analyses of questionnaires from a longitudinal community data base. Questionnaires of 203 users of CM services and 273 non-users, complete for all outcome and predictor variables. Individuals with TBI, 15 years of age and older. Out of a dataset of 1,960 questionnaires, 476 met the inclusion criteria. Eight predictor variables and one outcome variable (use or non-use of the service). Predictor variables considered the framework of the Behaviour Model of Health Service Use (BMHSU); specifically, pre-disposing, need and enabling factor groups as these relate to health service use and access. Analyses revealed significant differences between users and non-users of CM services. In particular, users were significantly younger than non-users as the older the person the less likely to use the service. Also, users had less education and more severe activity limitations and lower community integration. Persons living alone are less likely to use case management. Funding groups also significantly impact users. This study advances an empirical understanding of equity of access to health services usage in the practice of CM for persons living with TBI as a fairly new area of research, and considers direct relevance to Life Care Planning (LCP). Many life care planers are CM and the genesis of LCP is CM. The findings relate to health service use and access, rather than health outcomes. These findings may assist with development of a modified model for prediction of use to advance future cost of care predictions.

Clinically feasible NODDI characterization of glioma using multiband EPI at 7 T

Directory of Open Access Journals (Sweden)

Qiuting Wen

2015-01-01

Full Text Available Recent technological progress in the multiband echo planer imaging (MB EPI technique enables accelerated MR diffusion weighted imaging (DWI and allows whole brain, multi-b-value diffusion imaging to be acquired within a clinically feasible time. However, its applications at 7 T have been limited due to B1 field inhomogeneity and increased susceptibility artifact. It is an ongoing debate whether DWI at 7 T can be performed properly in patients, and a systematic SNR comparison for multiband spin-echo EPI between 3 T and 7 T has not been methodically studied. The goal of this study was to use MB EPI at 7 T in order to obtain 90-directional multi-shell DWI within a clinically feasible acquisition time for patients with glioma. This study included an SNR comparison between 3 T and 7 T, and the application of B1 mapping and distortion correction procedures for reducing the impact of variations in B0 and B1. The optimized multiband sequence was applied in 20 patients with glioma to generate both DTI and NODDI maps for comparison of values in tumor and normal appearing white matter (NAWM. Our SNR analysis showed that MB EPI at 7 T was comparable to that at 3 T, and the data quality acquired in patients was clinically acceptable. NODDI maps provided unique contrast within the T2 lesion that was not seen in anatomical images or DTI maps. Such contrast may reflect the complexity of tissue compositions associated with disease progression and treatment effects. The ability to consistently obtain high quality diffusion data at 7 T will contribute towards the implementation of a comprehensive brain MRI examination at ultra-high field.

A Hydrous Seismogenic Fault Rock Indicating A Coupled Lubrication Mechanism

Science.gov (United States)

Okamoto, S.; Kimura, G.; Takizawa, S.; Yamaguchi, H.

2005-12-01

In the seismogenic subduction zone, the predominant mechanisms have been considered to be fluid induced weakening mechanisms without frictional melting because the subduction zone is fundamentally quite hydrous under low temperature conditions. However, recently geological evidence of frictional melting has been increasingly reported from several ancient accretionary prisms uplifted from seismogenic depths of subduction zones (Ikesawa et al., 2003; Austrheim and Andersen, 2004; Rowe et al., 2004; Kitamura et al., 2005) but relationship between conflicting mechanisms; e.g. thermal pressurization of fluid and frictional melting is still unclear. We found a new exposure of pseudotachylyte from a fossilized out-of-sequence thrust (OOST) , Nobeoka thrust in the accretionary complex, Kyushu, southwest Japan. Hanging-wall and foot-wall are experienced heating up to maximum temperature of about 320/deg and about 250/deg, respectively. Hanging-wall rocks of the thrust are composed of shales and sandstones deformed plastically. Foot-wall rocks are composed of shale matrix melange with sandstone and basaltic blocks deformed in a brittle fashion (Kondo et al, 2005). The psudotachylyte was found from one of the subsidiary faults in the hanging wall at about 10 m above the fault core of the Nobeoka thrust. The fault is about 1mm in width, and planer rupture surface. The fault maintains only one-time slip event because several slip surfaces and overlapped slip textures are not identified. The fault shows three deformation stages: The first is plastic deformation of phyllitic host rocks; the second is asymmetric cracking formed especially in the foot-wall of the fault. The cracks are filled by implosion breccia hosted by fine carbonate minerals; the third is frictional melting producing pseudotachylyte. Implosion breccia with cracking suggests that thermal pressurization of fluid and hydro-fracturing proceeded frictional melting.

99mTc labelled cationic lipophilic complexes in malignant and benign tumors: the role of SPET and pinhole-SPET in breast cancer, differentiated thyroid carcinoma and hyperparathyroidism

International Nuclear Information System (INIS)

Schillaci, O.; Spanu, A.; Madeddu, G.

2005-01-01

Single photon emission tomography (SPET) represents an indispensable diagnostic tool in nuclear medicine. Due to better contrast resolution, cross sectional and 3D images, SPET plays a useful complementary tool to bidimensional planar scintigraphy in certain clinical conditions, while representing the procedure of choice in others. However, high resolution SPET with pinhole collimator (P-SPET) can improve conventional SPET sensitivity with parallel hole collimators. This review summarized data on the employment of conventional SPET and P-SPET in breast cancer, differentiated thyroid cancer (DTC) and hyperparathyroidism patients, using the cationic lipophilic complexes ( 99m Tc )metoxy isobutyl isonitrile (sestaMIBI) and ( 99m Tc )tetrofosmin as oncotropic radiotracers. In breast cancer patients, SPET with these radiotracers can play an important complementary role to planar scintimammography in detecting primary tumors, especially when non palpable and small in size, whereas SPET and particularly P-SPET represents the procedure of choice in preoperative axillary lymph node status evaluation in which planar is almost always irrelevant. In DTC follow-up patients, SPET and P-SPET with cationic lipophilic radiotracers are indicated in both locoregional and distant metastasis detection, especially in patients with high Tg serum levels and negative radioiodine scanning in whom these procedures represent a reliable alternative to diagnostic 131 I scanning. Moreover, the combined use of ( 99m Tc)tetrofosmin P-SPET and US can identify recurrences and lymph node metastases in the neck, both fixing and non fixing iodine, down staged or negative at 131 I scanning. SPET can also be a useful complementary tool to planar parathyroid scintigraphy in the detection and localization of small and ectopic parathyroid adenomas in the neck or mediastinum, while neck P-SPET seems to also significantly increase planer sensitivity in hyperplastic glands. SPET and P-SPET are indicated in

A study on vertical distribution of radionuclides in the soil layers 0-30 cm deep in relation to their particle size

International Nuclear Information System (INIS)

Megumi, K.; Sato, Y.; Matsunami, T.; Fukuda, K.; Ishiyama, T.; Kimura, S.; Tsujimoto, T.

1991-01-01

It is fundamentally important to have a detailed knowledge of distribution of radionuclides in soils in natural environments for an understanding of behavior of nuclides during a lengthy period beyond the limit of the possible in experimental systems. Core soil samples (30 cm) were taken from surface of the ground in the central parts (Osaka and Wakasa) of Japan. Each core sample was sliced into 5 cm sections and the parts of the soil larger than 10 mesh were excluded by standard sieves. Some of the samples were further sieved into four classes of soil particles, such as, 10-60, 60-100, 100-200 and more than 200 mesh. The concentrations of U-series nuclides ( 238 U, 226 Ra, 210 Pb), Th-series nuclides ( 232 Th, 228 Ra), 40 K and 137 Cs in the samples were determined by gamma ray spectrometry and photon activation analysis. The photon activation analysis with a planer type of Ge detector was made by irradiating the samples with bremsstrahlung of tungsten target from electron accelerator, 16 MeV, at Res. Inst. for Advanced Sci. and Tech., Univ. of Osaka Pref. Fallout 137 Cs and 210 Pb deposition in the soil layers showed vertical variation mainly depending on the organic substances contents, the ratios of water contents and particle sizes at each location. A good correlation was found between the concentrations of these two nuclides. This correlation is available to evaluate of the 137 Cs contamination levels in soils. The concentrations of 238 U, 226 Ra, 232 Th, 228 Ra and 40 K contained originally in soils, changed slightly with the depth and the vertical distributions of these nuclides were found to relate mainly to the soil particle size in the layer. This tendency was evidently observed in the soil originating from the weathering of granite rock. (author)

Cryopreservation studies of an artificial co-culture between the cobalamin-requiring green alga Lobomonas rostrata and the bacterium Mesorhizobium loti.

Science.gov (United States)

Ridley, Christian J A; Day, John G; Smith, Alison G

2018-01-01

Algal-bacterial co-cultures, rather than cultures of algae alone, are regarded as having the potential to enhance productivity and stability in industrial algal cultivation. As with other inocula in biotechnology, to avoid loss of production strains, it is important to develop preservation methods for the long-term storage of these cultures, and one of the most commonly used approaches is cryopreservation. However, whilst there are many reports of cryopreserved xenic algal cultures, little work has been reported on the intentional preservation of both algae and beneficial bacteria in xenic cultures. Instead, studies have focused on the development of methods to conserve the algal strain(s) present, or to avoid overgrowth of bacteria in xenic isolates during the post-thaw recovery phase. Here, we have established a co-cryopreservation method for the long-term storage of both partners in a unialgal-bacterial co-culture. This is an artificial model mutualism between the alga Lobomonas rostrata and the bacterium Mesorhizobium loti , which provides vitamin B 12 (cobalamin) to the alga in return for photosynthate. Using a Planer Kryo 360 controlled-rate cooler, post-thaw viability (PTV) values of 72% were obtained for the co-culture, compared to 91% for the axenic alga. The cultures were successfully revived after 6 months storage in liquid nitrogen, and continued to exhibit mutualism. Furthermore, the alga could be cryopreserved with non-symbiotic bacteria, without bacterial overgrowth occurring. It was also possible to use less controllable passive freezer chambers to cryopreserve the co-cultures, although the PTV was lower. Finally, we demonstrated that an optimised cryopreservation method may be used to prevent the overgrowth potential of non-symbiotic, adventitious bacteria in both axenic and co-cultures of L. rostrata after thawing.

Dual source and dual detector arrays tetrahedron beam computed tomography for image guided radiotherapy

International Nuclear Information System (INIS)

Kim, Joshua; Zhang, Tiezhi; Lu, Weiguo

2014-01-01

Cone-beam computed tomography (CBCT) is an important online imaging modality for image guided radiotherapy. But suboptimal image quality and the lack of a real-time stereoscopic imaging function limit its implementation in advanced treatment techniques, such as online adaptive and 4D radiotherapy. Tetrahedron beam computed tomography (TBCT) is a novel online imaging modality designed to improve on the image quality provided by CBCT. TBCT geometry is flexible, and multiple detector and source arrays can be used for different applications. In this paper, we describe a novel dual source–dual detector TBCT system that is specially designed for LINAC radiation treatment machines. The imaging system is positioned in-line with the MV beam and is composed of two linear array x-ray sources mounted aside the electrical portal imaging device and two linear arrays of x-ray detectors mounted below the machine head. The detector and x-ray source arrays are orthogonal to each other, and each pair of source and detector arrays forms a tetrahedral volume. Four planer images can be obtained from different view angles at each gantry position at a frame rate as high as 20 frames per second. The overlapped regions provide a stereoscopic field of view of approximately 10–15 cm. With a half gantry rotation, a volumetric CT image can be reconstructed having a 45 cm field of view. Due to the scatter rejecting design of the TBCT geometry, the system can potentially produce high quality 2D and 3D images with less radiation exposure. The design of the dual source–dual detector system is described, and preliminary results of studies performed on numerical phantoms and simulated patient data are presented. (paper)

Manual: environmental impact statement and intervention regulation; Leitfaden Umweltvertraeglichkeitspruefung und Eingriffsregelung

Energy Technology Data Exchange (ETDEWEB)

Neumann, K

1993-12-31

In order to be able to fulfil also legally the important tasks of environmental protection and natural preservation in the last ten years numerous legal provisions have been issued. Many of these laws require that the environmental impact of projects and constructional measures is taken into account to a higher degree. Two important instruments in this connection are the impact statement and the intervention regulation of natural preservation. Their importance and consequences for the planning and realization of projects are until now not sufficiently know. This manual is to fill this gap. This booklet shall help builder-owners and investors to realize their building projects in a way which is compatible with the environment. For architects and planners information is given in this manual about the requirements to be fulfilled in the individual planning and licensing procedures. The booklet is structured in a way that builder-owners, consultants and authorities find quickly the information needed. (orig./KW) [Deutsch] Um die wichtigen Aufgaben des Umwelt- und Naturschutzgesetzes auch rechtlich zu bewaeltigen, sind in den letzten Jahren eine Vielzahl von Rechtsvorschriften erlassen worden. Zahlreiche dieser Gesetze erfordern, dass kuenftig Umwelt- und Naturschutzbelange bei Planungen und Baumassnahmen staerker beruecksichtigt werden. Zwei wesentliche Instrumente dafuer sind die Umweltvertraeglichkeitspruefung (UVP) und die naturschutzrechtliche Eingriffsregelung. Ihre Bedeutung und die sich daraus ergebenden Konsequenzen fuer die Planung und Ausfuehrung von Vorhaben sind bislang allerdings noch nicht hinreichend bekannt. Diese Luecke soll der vorliegende Leitfaden schliessen helfen. Bauherren und Investoren sollen mit dieser Broschuere informiert werden, wie sie ihr geplantes Bauvorhaben umweltvertraeglich realisieren koennen. Architekten und Planer koennen durch diesen Leitfaden erfahren, welche Leistungen in den einzelnen Planungs- und Genehmigungsverfahren zu

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States); Basher, A.M.H. [South Carolina State Univ., Orangeburg, SC (United States)

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Basher, A.M.H.

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Avian post-construction studies and EIA for planned extension of the Hitra wind-power plant; EIA = environmental impact assessment; Ornitologisk etterundersoekelse og konsekvensutredning i tilknytning til planer for utvidelse av Hitra vindkraftverk

Energy Technology Data Exchange (ETDEWEB)

Bevanger, K.; Dahl, E.L.; Gjershaug, J.O.; Halley, D.J.; Hanssen, F.O.; Nygaard, T.; Pearson, M.; Pedersen, H.C.; Reitan, O.

2010-03-15

The results indicate that the annual number of dead birds recorded varies, and that an annual average probably is slightly less than two dead white-tailed eagles and four willow ptarmigans as long as 24 turbines are operating in the wind-power plant. The number of dead birds recorded is minimum figures. The total collision rate has not been estimated, however, the terrain where the power plant is located is difficult to search, and thus the habitat bias will be significant. Taking into account removal rate (scavenging bias) and search efficiency of the dog (search bias) it is assumed that the real number of casualties is somewhat higher. Dead birds are particularly found near turbines located at the edge of the power plant. There is insufficient evidence to conclude whether the recorded mortality for the white- tailed eagle is or is not acceptable with regard to short- or long-term population development. As regards the willow ptarmigan population, the data, while not conclusive, in combination with population censuses suggests that the power-plant extension will not be unacceptable for population development. Both for the white-tailed eagle and the willow ptarmigan an increased mortality must be expected when the power plant turbine number is increased.It is important to clarify whether there are established breeding pairs within the planning area, particularly in connection to the planned road access from the south. By building this road a general disturbance increase will take place. Whether the routing of the road will conflict with nest sites of red-listed species like the eagle owl and grey-headed wood- pecker is unknown as the routing not was known when the fieldwork took place during spring/summer 2009. There is, however, more reason to believe that the road might threaten an eagle owl territory than the contrary. The existing data are insufficient to conclude whether the encroachments connected to the road building from the south into the power-plant area are acceptable/unacceptable with regard to short- and long-term population development and survival for the eagle owl. Apart from this, construction of the Hitra 2 wind power plant is not considered to be unacceptable for the eagle owl, however, it cannot be ruled out that eagle owls will be killed by colliding with the power lines and/or turbines that will be constructed. The final routing plans for the power line seems to generate moderate conflicts with respect to bird collisions; however a prerequisite is that the line follows depressions in the terrain lowering the wires to a height below the treetops in forested areas. This is important with regard to collision hazard, as the tree canopy frequently determines the lower limit for bird flight height. One of the final plan drafts indicates a routing of the power line high up in the terrain, making it particularly exposed in the area from the southernmost turbines and transformer towards the central part of the power plant. Here the collision risk for grouse species as well as raptors and other species will be high. The alternative routing lower into the valley should be preferred. Areas where the terrain topography, together with solar radiation and prevailing wind directions, generate upward air currents (ridge-wind) are identified. Steep slopes towards the south are easily warmed by the sun and create potential areas for ridge wind/thermals. These are frequently used by white-tailed eagles and other raptors to gain height. Locating wind turbines, power lines or other man-made air obstacles in such areas, where frequent hang-wind/thermal generation takes place, may create an increased risk for bird collisions or injuries. Based on SpacEyes viewer, the user will be able to navigate within he terrain model and view the landscape and the turbine locations from a 'birds perspective' (own DVD attached). The final draft plan for the turbine locations indicates planned locations in areas where ridge winds are generated and thus an increased collision hazard for white-tailed eagles.(AG)

Study on laser welding of austenitic stainless steel by varying incident angle of pulsed laser beam

Science.gov (United States)

Kumar, Nikhil; Mukherjee, Manidipto; Bandyopadhyay, Asish

2017-09-01

In the present work, AISI 304 stainless steel sheets are laser welded in butt joint configuration using a robotic control 600 W pulsed Nd:YAG laser system. The objective of the work is of twofold. Firstly, the study aims to find out the effect of incident angle on the weld pool geometry, microstructure and tensile property of the welded joints. Secondly, a set of experiments are conducted, according to response surface design, to investigate the effects of process parameters, namely, incident angle of laser beam, laser power and welding speed, on ultimate tensile strength by developing a second order polynomial equation. Study with three different incident angle of laser beam 89.7 deg, 85.5 deg and 83 deg has been presented in this work. It is observed that the weld pool geometry has been significantly altered with the deviation in incident angle. The weld pool shape at the top surface has been altered from semispherical or nearly spherical shape to tear drop shape with decrease in incident angle. Simultaneously, planer, fine columnar dendritic and coarse columnar dendritic structures have been observed at 89.7 deg, 85.5 deg and 83 deg incident angle respectively. Weld metals with 85.5 deg incident angle has higher fraction of carbide and δ-ferrite precipitation in the austenitic matrix compared to other weld conditions. Hence, weld metal of 85.5 deg incident angle achieved higher micro-hardness of ∼280 HV and tensile strength of 579.26 MPa followed by 89.7 deg and 83 deg incident angle welds. Furthermore, the predicted maximum value of ultimate tensile strength of 580.50 MPa has been achieved for 85.95 deg incident angle using the developed equation where other two optimum parameter settings have been obtained as laser power of 455.52 W and welding speed of 4.95 mm/s. This observation has been satisfactorily validated by three confirmatory tests.

[Revision of Schatzker type Ⅵ tibial plateau fracture failure focus on the recovery of lower limb alignment].

Science.gov (United States)

Cong, R J; Liu, J F; Jiang, Y; Dilixiati, Duolikun; Hou, X D; Zheng, L P

2018-03-01

Objective: To explore the influence of the lower extremity abnormal alignment and the joint surface, and to explore the surgical skills. Methods: Twenty-two cases of tibial plateau Schatzker Ⅵ fracture internal fixation failure revision from January 2012 to January 2017 in Department of Orthopedics, Shanghai 10(th) Hospital.One year follow-up after initial surgery to make sure of failure.Three-dimensional CT scan, radiography, infection index, gait analysis, knee joint ROM, femur tibia angle, tibial plateau tibial shaft angle and posterior slope if tibial plateau were observed. The medial approach and bi-planer osteotoma were used.Autogenous iliac bone graft, postoperative fast recovery channel were used.Follow-up point included preoperative and postoperative 7 days, 6 weeks, 3 months, and 6 months.Obvervational index included double lower limbs radiography, knee society score(KSS), complications such as infection, skin necrosis, joint main passive activity, double lower limbs alignment the last follow-up SF-36 scale.Rate was compared by χ(2) test, measurement data using paired sample t test.Correlation was analyzed by Pearson correlation regression testing. Results: Twenty-two patients received follow-up.KSS, more than 21 cases were benign, with good gait.One case was poor, with claudication gait.Not skin necrosis, no deep infection cases, 1 case get blisters 2 days postoperatively, and disappear after 5 days with detumescence and cold therapy.Whether restoring force line affect the KSS significantly(χ(2)=22.000, P =0.000). Knee joint ROM, SF-36 score, KSS and lower limb alignment were improved significantly. In different individual the articular surface and anatomical angle recovered greatly but the posterior slope angle was quite difference which has no correlation with KSS and SF-36 scale( P >0.01). Conclusions: Revision of Schatzker type Ⅵ tibial plateau fracture failure should focus on the recovery of lower limb alignment.moderate overcorrect bone

Spherical grating based x-ray Talbot interferometry

Energy Technology Data Exchange (ETDEWEB)

Cong, Wenxiang, E-mail: congw@rpi.edu, E-mail: xiy2@rpi.edu, E-mail: wangg6@rpi.edu; Xi, Yan, E-mail: congw@rpi.edu, E-mail: xiy2@rpi.edu, E-mail: wangg6@rpi.edu; Wang, Ge, E-mail: congw@rpi.edu, E-mail: xiy2@rpi.edu, E-mail: wangg6@rpi.edu [Biomedical Imaging Center, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

2015-11-15

Purpose: Grating interferometry is a state-of-the-art x-ray imaging approach, which can acquire information on x-ray attenuation, phase shift, and small-angle scattering simultaneously. Phase-contrast imaging and dark-field imaging are very sensitive to microstructural variation and offers superior contrast resolution for biological soft tissues. However, a common x-ray tube is a point-like source. As a result, the popular planar grating imaging configuration seriously restricts the flux of photons and decreases the visibility of signals, yielding a limited field of view. The purpose of this study is to extend the planar x-ray grating imaging theory and methods to a spherical grating scheme for a wider range of preclinical and clinical applications. Methods: A spherical grating matches the wave front of a point x-ray source very well, allowing the perpendicular incidence of x-rays on the grating to achieve a higher visibility over a larger field of view than the planer grating counterpart. A theoretical analysis of the Talbot effect for spherical grating imaging is proposed to establish a basic foundation for x-ray spherical gratings interferometry. An efficient method of spherical grating imaging is also presented to extract attenuation, differential phase, and dark-field images in the x-ray spherical grating interferometer. Results: Talbot self-imaging with spherical gratings is analyzed based on the Rayleigh–Sommerfeld diffraction formula, featuring a periodic angular distribution in a polar coordinate system. The Talbot distance is derived to reveal the Talbot self-imaging pattern. Numerical simulation results show the self-imaging phenomenon of a spherical grating interferometer, which is in agreement with the theoretical prediction. Conclusions: X-ray Talbot interferometry with spherical gratings has a significant practical promise. Relative to planar grating imaging, spherical grating based x-ray Talbot interferometry has a larger field of view and

Spherical grating based x-ray Talbot interferometry

International Nuclear Information System (INIS)

Cong, Wenxiang; Xi, Yan; Wang, Ge

2015-01-01

Purpose: Grating interferometry is a state-of-the-art x-ray imaging approach, which can acquire information on x-ray attenuation, phase shift, and small-angle scattering simultaneously. Phase-contrast imaging and dark-field imaging are very sensitive to microstructural variation and offers superior contrast resolution for biological soft tissues. However, a common x-ray tube is a point-like source. As a result, the popular planar grating imaging configuration seriously restricts the flux of photons and decreases the visibility of signals, yielding a limited field of view. The purpose of this study is to extend the planar x-ray grating imaging theory and methods to a spherical grating scheme for a wider range of preclinical and clinical applications. Methods: A spherical grating matches the wave front of a point x-ray source very well, allowing the perpendicular incidence of x-rays on the grating to achieve a higher visibility over a larger field of view than the planer grating counterpart. A theoretical analysis of the Talbot effect for spherical grating imaging is proposed to establish a basic foundation for x-ray spherical gratings interferometry. An efficient method of spherical grating imaging is also presented to extract attenuation, differential phase, and dark-field images in the x-ray spherical grating interferometer. Results: Talbot self-imaging with spherical gratings is analyzed based on the Rayleigh–Sommerfeld diffraction formula, featuring a periodic angular distribution in a polar coordinate system. The Talbot distance is derived to reveal the Talbot self-imaging pattern. Numerical simulation results show the self-imaging phenomenon of a spherical grating interferometer, which is in agreement with the theoretical prediction. Conclusions: X-ray Talbot interferometry with spherical gratings has a significant practical promise. Relative to planar grating imaging, spherical grating based x-ray Talbot interferometry has a larger field of view and

Inequity in maternal health care service utilization in Gujarat: analyses of district-level health survey data.

Science.gov (United States)

Saxena, Deepak; Vangani, Ruchi; Mavalankar, Dileep V; Thomsen, Sarah

2013-03-06

Two decades after the launch of the Safe Motherhood campaign, India still accounts for at least a quarter of maternal death globally. Gujarat is one of the most economically developed states of India, but progress in the social sector has not been commensurate with economic growth. The purpose of this study was to use district-level data to gain a better understanding of equity in access to maternal health care and to draw the attention of the policy planers to monitor equity in maternal care. Secondary data analyses were performed among 7,534 ever-married women who delivered since January 2004 in the District Level Household and Facility Survey (DLHS-3) carried out during 2007-2008 in Gujarat, India. Based on the conceptual framework designed by the Commission on the Social Determinants of Health, associations were assessed between three outcomes - Institutional delivery, antenatal care (ANC), and use of modern contraception - and selected intermediary and structural determinants of health using multiple logistic regression. Inequities in maternal health care utilization persist in Gujarat. Structural determinants like caste group, wealth, and education were all significantly associated with access to the minimum three antenatal care visits, institutional deliveries, and use of any modern method of contraceptive. There is a significant relationship between being poor and access to less utilization of ANC services independent of caste category or residence. Poverty is the most important determinant of non-use of maternal health services in Gujarat. In addition, social position (i.e. caste) has a strong independent effect on maternal health service use. More focused and targeted efforts towards these disadvantaged groups needs to be taken at policy level in order to achieve targets and goals laid out as per the MDGs. In particular, the Government of Gujarat should invest more in basic education and infrastructural development to begin to remove the structural causes

Inequity in maternal health care service utilization in Gujarat: analyses of district-level health survey data

Directory of Open Access Journals (Sweden)

Dileep V. Mavalankar

2013-03-01

Full Text Available Background: Two decades after the launch of the Safe Motherhood campaign, India still accounts for at least a quarter of maternal death globally. Gujarat is one of the most economically developed states of India, but progress in the social sector has not been commensurate with economic growth. The purpose of this study was to use district-level data to gain a better understanding of equity in access to maternal health care and to draw the attention of the policy planers to monitor equity in maternal care. Methods: Secondary data analyses were performed among 7,534 ever-married women who delivered since January 2004 in the District Level Household and Facility Survey (DLHS-3 carried out during 2007–2008 in Gujarat, India. Based on the conceptual framework designed by the Commission on the Social Determinants of Health, associations were assessed between three outcomes – Institutional delivery, antenatal care (ANC, and use of modern contraception – and selected intermediary and structural determinants of health using multiple logistic regression. Results: Inequities in maternal health care utilization persist in Gujarat. Structural determinants like caste group, wealth, and education were all significantly associated with access to the minimum three antenatal care visits, institutional deliveries, and use of any modern method of contraceptive. There is a significant relationship between being poor and access to less utilization of ANC services independent of caste category or residence. Discussion and conclusions: Poverty is the most important determinant of non-use of maternal health services in Gujarat. In addition, social position (i.e. caste has a strong independent effect on maternal health service use. More focused and targeted efforts towards these disadvantaged groups needs to be taken at policy level in order to achieve targets and goals laid out as per the MDGs. In particular, the Government of Gujarat should invest more in basic

Three-dimensional corticospinal tractography for brain tumor surgery

International Nuclear Information System (INIS)

Kamada, Kyousuke

2009-01-01

Maximal resection of the intracranial lesion like a brain tumor and concomitant identification of the unresectable region for avoiding the loss of motor and language functions are important before and during the operation. For these purposes, corticospinal tract (CST)-tractography (TG) based on diffusion tensor imaging (DTI) is widely used for nerve fiber tracking but it is conceivably essential to examine if the CST image in problem reflects the actually valid anatomical, functional CST. For the problem, in author's department, the intraoperative local relationship between the lesion and CST is monitored by a neuronavigation (NNA) system combined with CST-TG in case of patients who have the lesion close to CST and, when the resection site approaches CST, its surrounding white matter is electrically stimulated to evoke the myoelectric potential at upper and lower limbs. Here are reported examinations of the reliability of CST-TG by analysis of the positional relation of CST with the electric stimulating point and current value, and of the expansion of the subcortical stimulation current in the white matter. MRI data of such 40 patients as above by 1.5 or 3T machine were obtained with spin-echo/echo planer imaging and subsequent DTI data were processed by authors' VOLUME-ONE/dTV (http://volume-one.org). CST-TG-fused functional NNA was conducted by NNA system where 3D reconstructed image of CST-TG DTI and 3DMRI using digital imaging and communication medicine (DICOM) and the evoked functional myoelectric potential had been combined. This fusion was found useful for rapid decision of the position and timing of the electric stimulation at surgery, and highly reliable as CST-TG. Further, the stimulating threshold in the white matter was found lower than in the cortex. Future progress in imaging technology and separating algorithm of crossing fibers was expected for improved image of more complex central nervous system (CNS) structures. (K.T.)

ETA-BEMS - Development of testing procedures for inspection of building energy management systems; ETA-BEMS - Entwicklung von Testprozeduren zur Abnahme von Building-Energy-Management-Systemen. Endbericht

Energy Technology Data Exchange (ETDEWEB)

Bach, H.; Grob, R.F.

2000-07-01

Based on the investigations of project VITE-BEMS, a computer-assisted method for commissioning and acceptance testing of complex digital building control systems is presented. Tests are classified as either open-loop or closed-loop tests. A test stand was constructed in which the control systems to be tested were connected to a building and facility simulation system in order to model the behaviour of the real facility for which the control system is intended. The models were adapted and optimized with a view to simplicity and easy convertibility. [German] Aufbauend auf dem bereits bestehenden Lebenszyklusansatz fuer die Simulation und den Arbeiten, die im Projekt VITE-BEMS /6/ durchgefuehrt wurden, wird eine computergestuetzte Vorgehensweise fuer die Inbetriebnahme und die Abnahme von komplexen digitalen Regelsystemen im Bereich der Gebaeude- und RLT-Technik vorgestellt. Nach einer kritischen Betrachtung der Abnahmeprozesse in der gaengigen Praxis, werden hierfuer zunaechst Testprozeduren entwickelt. Diese Testprozeduren fuer die Inbetriebnahme und Abnahme von digitalen Regelungssysteme koennen unterteilt werden in Tests, bei denen das jeweilige Regelungssystem mit einer virtuellen heiz- und raumlufttechnischen Anlage in Wechselwirkung steht (Closed-Loop-Tests) und solchen, bei denen Regelfunktionen ohne eine direkte Rueckkopplung zur zu regelnden Anlage ueberprueft werden (Open-Loop-Tests). Durch diese unterschiedlichen Prozeduren wird eine systematische Ueberpruefung der Regelfunktionen, die vom Planer der jeweiligen Anlage spezifiziert und gefordert werden, ermoeglicht. Entsprechend den Anforderungen dieser Testprozeduren wird auf einem ebenfalls neu entwickelten Emulationsversuchsstand eine virtuelle Testumgebung aufgebaut, auf der die Prozeduren an den zu testenden Regelgeraeten ablaufen. In dieser Testumgebung wird das zu pruefende Regelungssystem an eine Anlagen- und Gebaeudesimulation angeschlossen. Mit der Simulation wird das Verhalten der realen Anlage

Manual of low-capacity bioenergy systems; Handbuch Bioenergie-Kleinanlagen

Energy Technology Data Exchange (ETDEWEB)

Hartmann, H. (ed.); Thuneke, K.; Hoeldrich, A.; Rossmann, P.; Meier, L.; Eismann, H.; Nielsen, H.

2003-02-01

Brennstoffbeschaffung und -handhabung erleichtern, - die fuer die Realisierung notwendigen Kontakte vermitteln sowie - als Nachschlagewerk fuer alle Fragen rund um das Thema Kleinanlagen dienen. Durch diese Zielvorgabe richtet sich der Leitfaden grundsaetzlich an alle Personen, die sich fuer die energetische Biomassenutzung interessieren und in ihrem unmittelbaren Einflussbereich mit der Problematik in Beruehrung kommen. Damit ist fuer den Leitfaden eine sehr breite Zielgruppe gegeben; sie umfasst die privaten Haushalte im laendlichen und staedtischen Raum, kleine Gewerbebetriebe, Planer und Architekten, Brennstoffproduzenten oder -haendler, private oder oeffentliche Beratungsstellen und Andere. (orig.)

Modelling the interaction between flooding events and economic growth

Science.gov (United States)

Grames, Johanna; Grass, Dieter; Prskawetz, Alexia; Blöschl, Günther

2015-04-01

Socio-hydrology describes the interaction between the socio-economy, water and population dynamics. Recent models analyze the interplay of community risk-coping culture, flooding damage and economic growth (Di Baldassarre, 2013, Viglione, 2014). These models descriptively explain the feedbacks between socio-economic development and natural disasters like floods. Contrary to these descriptive models, our approach develops an optimization model, where the intertemporal decision of an economic agent interacts with the hydrological system. This is the first economic growth model describing the interaction between the consumption and investment decisions of an economic agent and the occurrence of flooding events: Investments in defense capital can avoid floods even when the water level is high, but on the other hand such investment competes with investment in productive capital and hence may reduce the level of consumption. When floods occur, the flood damage therefore depends on the existing defense capital. The aim is to find an optimal tradeoff between investments in productive versus defense capital such as to optimize the stream of consumption in the long-term. We assume a non-autonomous exogenous periodic rainfall function (Yevjevich et.al. 1990, Zakaria 2001) which implies that the long-term equilibrium will be periodic . With our model we aim to derive mechanisms that allow consumption smoothing in the long term, and at the same time allow for optimal investment in flood defense to maximize economic output. We choose an aggregate welfare function that depends on the consumption level of the society as the objective function. I.e. we assume a social planer with perfect foresight that maximizes the aggregate welfare function. Within our model framework we can also study whether the path and level of defense capital (that protects people from floods) is related to the time preference rate of the social planner. Our model also allows to investigate how the frequency

Effects of Internal and External Hydrogen on Inconel 718

Science.gov (United States)

Walter, R. J.; Frandsen, J. D.

1999-01-01

planes. Final brittle failure occurred by hydrogen induced planer decohesion.

Inverse method for effects characterization from ultrasonic b-scan images; Caracterisation des defauts par une methode d'inversion lors d'un controle ultrasonore. Application au controle des defauts en paroi externe

Energy Technology Data Exchange (ETDEWEB)

Faur, M. [Paris-11 Univ., 91 - Orsay (France)

1999-02-01

In service inspections of French nuclear pressure water reactor vessels are carried out automatically in complete immersion from the inside by means of ultrasonic focused probes working in the pulse echo mode. Concern has been expressed about the capabilities of performing non destructive evaluation of the Outer Surface Defects (OSD), i.e. defects located in the vicinity of the outer surface of the inspected components. OSD are insonified by both a direct field that passes through the inner surface (water/steel) of the component containing the defect and a secondary field reflected from the outer surface. Consequently, the Bscan images, containing the signatures of such defects, are complicated and their interpretation is a difficult task. This work deals with extraction of the maximum available information for characterizing OSD from ultrasonic Bscan images. Our main objectives are to obtain the type of OSD and their geometric parameters by means of two specific inverse methods. The first method is used for the identification of the geometrical parameters of the equivalent planar OSD from segmented Bscan images. Ultrasonic equivalent defect sizing model-based methods may be used to size a defect in a material by obtaining a best-fit simple equivalent shape that matches the ultrasonic observed data. We illustrate the application of such an equivalent sizing OSD method that is based on a simplified direct model. The major drawback of this identification method, as used to date, is that only a part of the useful information contained into original Bscan image, i.e. segmented Bscan image, is used for defect characterization. Moreover, it requires the availability of defect classification information (i.e. if the defect is volumetric or planer, e. g. a crack or a lack of fusion), which, generally, may be as difficult to obtain as the defect parameters themselves. Therefore, we propose a parameter estimation method for extracting complementary information on the defect

America's First Carl Sagan: Ormsby MacKnight Mitchel, Pre-Civil War Astronomer and Lecturer on the Cosmos

Science.gov (United States)

Osterbrock, D. E.

2002-12-01

In the years before television, videos, radio. movies, or even loudspeakers, Ormsby MacKnight Mitchel (1809-1862) was the best-known popularizer of astronomy and the scientific study of the universe in nineteenth-century America. Each winter he traveled the country by railroad, steamer, and stagecoach, speaking to large paying crowds in principal cities from Boston, New York, and Philadelphia through Cincinnati to New Orleans on the cosmos and our place in it, with special attention to possible inhabitants of planers orbiting other stars. Mitchel had much the same attraction as Sagan did in our time, and awakened many people's interest in astronomy through the human angle, as Carl did. His argument was simple, and according to Frank Triplett goes back thousands of years: other stars are suns, our sun has planets with people on one of them, why should not other stars also have populated planets? But first Mitchel, like Sagan, always explained clearly the discoveries of astronomy that fleshed out this argument with facts. He emphasized the ``clockwork universe", governed by gravity, that Newton, Herschel, and Laplace had investigated and found to be stable. There were many other similarities between these two great popularizers. Mitchel's base was the Cincinnati Observatory, which he had founded, raising the funds for it himself in small contributions from hundreds of ``members", which he publicised as far more democratic than support from European kings and lords. He went abroad to get a telescope, and finally found his ``Great [12-inch] Refractor" in Munich, with help from John Quincy Adams, Astronomer Royal George Biddle Airy, and Paris Observatory Director Fracois Arago, in spite of a rebuff by President John Tyler. These episodes have similarities in Sagan's lobbying NASA for close-up images of Mars. Views of other American professional astronomers on life on other worlds will also be described briefly, from Denison Olmsted, Elias Loomis, Charles A. Young (who

FINITE ELEMENT ANALYSIS OF CONCRETE FILLER INFLUENCE ON DYNAMIC RIGIDITY OF HEAVY MACHINE TOOL PORTAL

Directory of Open Access Journals (Sweden)

Yu. V. Vasilevich

2016-01-01

Full Text Available Virtual testing of portal machine tool has been carried out with the help of finite elements method (FEM. Static, modal and harmonic analyses have been made for a heavy planer. The paper reveals influence of concrete filler on machine tool dynamic flexibility. A peculiar feature of the simulation is concrete filling of a high-level transverse beam. Such approach oes look a typical one for machine-tool industry. Concrete has been considered as generalized material in two variants. It has been established that concrete application provides approximately 3-fold increase in machine tool rigidity per each coordinate. In this regard it is necessary to arrange closure of rigidity contour by filling all the cavities inside of the portal. Modal FEA makes it possible to determine that concrete increases comparatively weakly (1.3–1.4-fold frequencies of resonance modes. Frequency of the lowest mode rises only from 30.25 to 42.86 Hz. The following most active whole-machine eigenmodes have been revealed in the paper: “Portal pecking”, “Parallelogram” and “Traverse pecking”. In order to restrain the last mode it is necessary to carry out concrete filling of the traverse, in particular. Frequency-response characteristics and curves of dynamic rigidity for a spindle have been plotted for 0–150 Hz interval while using harmonic FEM. It has been determined that concrete increases dynamic machine tool rigidity by 2.5–3.5-fold. The effect is obtained even in the case when weakly damping concrete (2 % is used. This is due to distribution of vibrational energy flow along concrete and along cast iron as well. Thus energy density and vibration amplitudes must decrease. The paper shows acceptability for internal reinforcement of high-level machine tool parts (for example, portal traverses and fillers are applied for this purpose. Traverse weighting is compensated by additional torsional, shear and bending rigidity. The machine tool obtains the

Health implications of radiological terrorism: Perspectives from Israel

Directory of Open Access Journals (Sweden)

Hagby Moti

2009-01-01

Full Text Available September 11 th events taught us, members of the medical community, that we need to prepared for the worst. Nuclear terror is no longer science fiction. Radiological weapons of mass terror come in three flavors: The first one is nuclear. Since 1992, there have been six known cases of highly enriched uranium or plutonium being intercepted by authorities as it passed in or out of the former Soviet Union. Constructing a nuclear fission weapon requires high-level expertise, substantial facilities, and lots of money. All three of which would be difficult, although not impossible, for a terrorist group to pull off without state support. However, terrorists could carry out potential mass destruction without sophisticated weaponry by targeting nuclear facilities using conventional bombs or hijacked aircrafts. Terror attacks could also carry out mass panic and radioactive contamination of people and environment by dispersal of radioactive materials with or without the use of conventional explosive devices. Most medical and para-medical personnel are not familiar with CBRN terror and radiation casualties. To lessen the impact of those potential attacks and provide care for the greatest number of potential survivors, the community as a whole - and the medical community in particular - must acquire the knowledge of the various signs and symptoms of exposure to irradiation and radioactive contamination as well as have a planned response once such an attack has occurred. Based on knowledge of radiation hazards, medical emergency planers should analyze the risks of each scenario, offer feasible solutions and translate them into internationally accepted plans that would be simple to carry out once such an attack took place. The planned response should be questioned and tested by drills. Those drills should check the triage, evacuation routes, decontamination posts, evacuation centers and receiving hospitals. It is crucial that the drill will consist of

Functional reorganization of human motor cortex after unaffected side C7 nerve root transposition

International Nuclear Information System (INIS)

Gao Gejun; Feng Xiaoyuan; Xu Wendong; Gu Yudong; Tang Weijun; Sun Guixin; Li Ke; Li Yuan; Geng Daoying

2006-01-01

Objective: To assess the characteristics of neuronal activity in human motor cortex after the seventh cervical nerve root transposition of the unaffected side by using functional MRI (fMRI). Methods: Thirteen patients who accepted the seventh cervical nerve root transposition of the unaffected side, due to total brachial plexus traction injury diagnosed by manifestation and operation, were examined retrospectively by using fMRI. 10 patients were injured on the left side and 3 on the right side. According to functional recovery of the affected hand, all subjects can be divided into 2 groups. The patients of the first group could not move the affected hand voluntarily. The patients of the second group could move the affected hand self-determined. 12 healthy volunteer's were also involved in this study as control. The fMRI examinations were performed by using echo-planer BOLD sequence. Then the SPM 99 software was used for post-processing. Results: The neuronal activation induced by the movement of both unaffected and affected upper' limb was seen in the contralateral PMC in all patients; Neuronal activation in the ipsilateral PMC evoked by movement of the unaffected extremity was seen in 10 cases, and induced by movement of the affected limb was seen in 7 cases. In the first group, the sharp of clusters in the contralateral PMC resulted by movement of the unaffected extremity showed normal in 9 eases, the average size of clusters resulted by the unaffected hand was 3159 (voxel), and resulted by the unaffected shoulder was 1746(voxel). The sharp of clusters in the contralateral PMC resulted by the affected shoulder or hand were revealed enlargement in 6 cases of each. In the second group, 1 case showed neuronal activation induced by movement of the affected limb in the PMC in both sides of motor cortex, and 2 cases showed neuronal activation in the contralateral PMC. Conclusions: Peripheral nerve injury was able to cause changes of motor cortex in human brain

Effects of the technique of cryopreservation and dilution/centrifugation after thawing on the motility and vitality of spermatozoa of oligoasthenozoospermic men

Directory of Open Access Journals (Sweden)

Esteves Sandro C.

2003-01-01

Full Text Available OBJECTIVE: Comparing in human semen samples with low initial quality, the effects of 2 techniques of cryopreservation and dilution/centrifugation after thawing on the spermatic motility and vitality. MATERIALS AND METHODS: Semen samples from 15 oligo and/or asthenozoospermic individuals assisted in the infertility sector of a tertiary hospital were obtained through masturbation. The samples were divided into 2 portions of equal volume, and diluted (1:1; v/v with the cryoprotector containing glycerol (Test yolk buffer. One portion was frozen through the technique of liquid nitrogen vapor with static phases (group I - GI, while the other was frozen through a programmable biological freezer with linear speed (Planer, Kryo 10, series III (group II - GII. The following parameters were assessed before freezing and after thawing: percentage of spermatozoa with progressive motility (Prog% and percentage of live spermatozoa (Vit%. After defrosting, Prog% was assessed before and after removal of cryoprotector diluent, in different time intervals (zero, 3 h, and 24 h. The statistical analysis has been accomplished by using the non-parametric tests of Wilcoxon and Friedman. RESULTS: There was significant reduction of Prog% and Vit% from before freezing to after defrosting in both groups, I and II (p < 0.001. Values of Prog% and Vit% were not statistically different between groups, after thawing. It has been observed a significant reduction in Prog% among portions frozen with the automated technique after dilution and centrifugation for removal of cryoprotector (p = 0.006. After cryoprotector removal, Prog% has been kept unaltered, in both groups, during the first 3 hours of incubation, although being superior in group I (p = 0,04. There was a significant decrease in Prog% after 24 hours of incubation, in both groups (p < 0,01. CONCLUSION: For human semen samples with low initial quality, freezing through vapor technique or through the automated technique

Inverse method for effects characterization from ultrasonic b-scan images

International Nuclear Information System (INIS)

Faur, M.

1999-02-01

In service inspections of French nuclear pressure water reactor vessels are carried out automatically in complete immersion from the inside by means of ultrasonic focused probes working in the pulse echo mode. Concern has been expressed about the capabilities of performing non destructive evaluation of the Outer Surface Defects (OSD), i.e. defects located in the vicinity of the outer surface of the inspected components. OSD are insonified by both a direct field that passes through the inner surface (water/steel) of the component containing the defect and a secondary field reflected from the outer surface. Consequently, the Bscan images, containing the signatures of such defects, are complicated and their interpretation is a difficult task. This work deals with extraction of the maximum available information for characterizing OSD from ultrasonic Bscan images. Our main objectives are to obtain the type of OSD and their geometric parameters by means of two specific inverse methods. The first method is used for the identification of the geometrical parameters of the equivalent planar OSD from segmented Bscan images. Ultrasonic equivalent defect sizing model-based methods may be used to size a defect in a material by obtaining a best-fit simple equivalent shape that matches the ultrasonic observed data. We illustrate the application of such an equivalent sizing OSD method that is based on a simplified direct model. The major drawback of this identification method, as used to date, is that only a part of the useful information contained into original Bscan image, i.e. segmented Bscan image, is used for defect characterization. Moreover, it requires the availability of defect classification information (i.e. if the defect is volumetric or planer, e. g. a crack or a lack of fusion), which, generally, may be as difficult to obtain as the defect parameters themselves. Therefore, we propose a parameter estimation method for extracting complementary information on the defect

Sulfation of ceria-zirconia model automotive emissions control catalysts

Science.gov (United States)

Nelson, Alan Edwin

Cerium-zirconium mixed metal oxides are used in automotive emissions control catalysts to regulate the partial pressure of oxygen near the catalyst surface. The near surface oxygen partial pressure is regulated through transfer of atomic oxygen from the ceria-zirconia solid matrix to the platinum group metals to form metal oxides capable of oxidizing carbon monoxide and unburned hydrocarbons. Although the addition of zirconium in the cubic lattice of ceria increases the oxygen storage capacity and thermal stability of the ceria matrix, the cerium-zirconium oxide system remains particularly susceptible to deactivation from sulfur compounds. While the overall effect of sulfur on these systems is understood (partially irreversible deactivation), the fundamental and molecular interaction of sulfur with ceria-zirconia remains a challenging problem. Ceria-zirconia metal oxide solid solutions have been prepared through co-precipitation with nitrate precursors. The prepared powders were calcined and subsequently formed into planer wafers and characterized for chemical and physical attributes. The prepared samples were subsequently exposed to a sulfur dioxide based environment and characterized with spectroscopic techniques to characterize the extent of sulfation and the nature of surface sulfur species. The extent of sulfation of the model ceria-zirconia systems was characterized with Auger electron spectroscopy (AES) prior to and after treatment in a microreactor. Strong dependencies were observed between the atomic ratio of ceria to zirconia and the extent of sulfation. In addition, the partial pressure of sulfur dioxide during treatments also correlated to the extent of sulfation, while temperature only slightly effected the extent of sulfation. The AES data suggests the gas phase sulfur dioxide preferentially chemisorbs on surface ceria atoms and the extent of sulfation is heavily dependent on sulfur dioxide concentrations and only slightly dependent on catalyst

En målsättning för de Andra: Förskolepedagogers tal om barn och föräldrar under planering och utvärdering på en förskola med en kulturellt blandad barngrupp

Directory of Open Access Journals (Sweden)

Johannes Lunneblad

2010-02-01

Full Text Available This article displays how a multicultural way of working in early childhood education is articulated during planning and evaluation. The results shows that it is articulated as an objective or goal for the Other. The objectives for a multicultural way of working fall outside of the regular activities. In these discussions, the immigrant parents are articulated in ambivalent positions, linked to a specific interests and responsibilities. At the same time as the pedagogues are making clear that parents must not feel that this is a demand or a coercion. It is possible to draw parallels with how integration policies are realized in practice, where multiculturalism has become associated with non-integrated pupils and their parents, and where the responsibility for lack of integration is often placed within these groups.

Earthquake Rupture at Focal Depth, Part I: Structure and Rupture of the Pretorius Fault, TauTona Mine, South Africa

Science.gov (United States)

Heesakkers, V.; Murphy, S.; Reches, Z.

2011-12-01

We analyze the structure of the Archaean Pretorius fault in TauTona mine, South Africa, as well as the rupture-zone that recently reactivated it. The analysis is part of the Natural Earthquake Laboratory in South African Mines (NELSAM) project that utilizes the access to 3.6 km depth provided by the mining operations. The Pretorius fault is a ~10 km long, oblique-strike-slip fault with displacement of up to 200 m that crosscuts fine to very coarse grain quartzitic rocks in TauTona mine. We identify here three structural zones within the fault-zone: (1) an outer damage zone, ~100 m wide, of brittle deformation manifested by multiple, widely spaced fractures and faults with slip up to 3 m; (2) an inner damage zone, 25-30 m wide, with high density of anastomosing conjugate sets of fault segments and fractures, many of which carry cataclasite zones; and (3) a dominant segment, with a cataclasite zone up to 50 cm thick that accommodated most of the Archaean slip of the Pretorius fault, and is regarded as the `principal slip zone' (PSZ). This fault-zone structure indicates that during its Archaean activity, the Pretorius fault entered the mature fault stage in which many slip events were localized along a single, PSZ. The mining operations continuously induce earthquakes, including the 2004, M2.2 event that rejuvenated the Pretorius fault in the NELSAM project area. Our analysis of the M2.2 rupture-zone shows that (1) slip occurred exclusively along four, pre-existing large, quasi-planer segments of the ancient fault-zone; (2) the slipping segments contain brittle cataclasite zones up to 0.5 m thick; (3) these segments are not parallel to each other; (4) gouge zones, 1-5 mm thick, composed of white `rock-flour' formed almost exclusively along the cataclasite-host rock contacts of the slipping segments; (5) locally, new, fresh fractures branched from the slipping segments and propagated in mixed shear-tensile mode; (6) the maximum observed shear displacement is 25 mm in

Implications of oxidative stress in the brain plasticity originated by fasting: a BOLD-fMRI study.

Science.gov (United States)

Belaïch, Rachida; Boujraf, Saïd; Benzagmout, Mohammed; Magoul, Rabia; Maaroufi, Mustapha; Tizniti, Siham

2017-11-01

The goal of this study was assessing the intermittent fasting effect on brain plasticity and oxidative stress (OS) using blood-oxygenation-level dependent (BOLD)-functional magnetic resonance image (fMRI) approach. Evidences of physiological and molecular phenomena involved in this process are discussed and compared to reported literature. Six fully healthy male non-smokers volunteered in this study. All volunteers were right handed, and have an equilibrated, consistent and healthy daily nutritional habit, and a healthy lifestyle. Participants were allowed consuming food during evening and night time while fasting with self-prohibiting food and liquids during 14 hours/day from sunrise to sunset. All participants underwent identical brain BOLD-fMRI protocol. The images were acquired in the Department of Radiology and Clinical Imaging of the University Hospital of Fez, Fez, Morocco. The anatomical brain and BOLD-fMRIs were acquired using a 1.5-Tesla scanner (Signa, General Electric, Milwaukee, United States). BOLD-fMRI image acquisition was done using single-shot gradient echo echo-planer imaging sequence. BOLD-fMRI paradigm consisted of the motor task where volunteers were asked to perform finger taping of the right hand. Two BOLD-fMRI scan sessions were performed, the first one between the 5th and 10th days preceding the start of fasting and the second between days 25th and 28th of the fasting month. All sessions were performed between 3:30 PM and 5:30 PM. Although individual maps were originated from different individual participants, they cover the same anatomic area in each case. Image processing and statistical analysis were conducted with Statistical Parameter Mapping version 8 (2008, Welcome Department of Cognitive Neurology, London UK). The maximal BOLD signal changes were calculated for each subject in the motor area M1; Activation maps were calculated and overlaid on the anatomical images. Group analysis of the data was performed, and the average volume

Photovoltaic systems. A guide for electricians, roofers, projecting engineers and architects; Photovoltaische Anlagen. Leitfaden fuer Elektriker, Dachdecker, Fachplaner, Architekten und Bauherren

Energy Technology Data Exchange (ETDEWEB)

Haselhuhn, R.; Berger, F.; Hasenoehrl, G.; Morsch, R.; Quaschning, V.; Rauscher, S.; Seltmann, T.; Hartmann, U.

2001-07-01

Nachschlagewerk in die Hand zu geben, das all die oben genannten Aspekte ausfuehrlich behandelt. Der Leitfaden soll so alle Beteiligten in die Lage versetzen, Photovoltaikanlagen dem neuesten Stand der Technik entsprechend qualitaetsbewusst zu planen, zu installieren und in Betrieb zu nehmen. Schwerpunkte sind hierbei (1) Funktionsprinzipien, Aufbau, Eigenschaften und Kennwerte der Komponenten, Module und Wechselrichter (b) Vororttermin und Standortanalyse (c) Verschattungsanalyse (d) Optimale Planung, Dimensionierung und Auslegung (e) Simulationsprogramme (f) Installation, Inbetriebnahme, Fehlersuche und Wartung (g) Montagesysteme und Integrationsmoeglichkeiten (h) Foerderprogramme. Eine vollstaendige Uebersicht der auf dem Markt erhaeltichen Module, Wechselrichter und Montagesysteme erleichert dem Planer und Installateur die Vorauswahl von Komponenten. Der Leitfaden ist als Loseblattsammloung konzipiert, um die Anwendung und spaetere Aktualisierung sowie Erweiterung flexibel und einfach zu gestalten. (orig.)

6. conference: Thermal waste management; 6. Fachtagung: Thermische Abfallbehandlung

Energy Technology Data Exchange (ETDEWEB)

Faulstich, M.; Urban, A.; Bilitewski, B. (eds.)

2001-07-01

Ersatzbrennstoffe stehen etablierte kommunale und industrielle Anlagen zur Mitverbrennung zur Verfuegung. Darueber hinaus sind etliche Unternehmen im Begriff, spezielle Heizwerke oder Heizkraftwerke fuer diese Brennstoffe zu errichten. Die klassischen Muellverbrennungsanlagen, also die Anlagen mit Rosttechnik, gehoeren damit jedoch keineswegs zum alten Eisen, im Gegenteil, sie weisen nach wie vor ein grosses Optimierungs- und Innovationspotenzial auf. Ausgewaehlte neue Konzepte fuer Feuerungen, Kessel, Korrosionsminderung und Rauchgasreinigung werden hier diskutiert. Nicht zuletzt gewinnen die Kosten in der kommunalen Abfallwirtschaft so auch bei der Abfallverbrennung seit Jahren an Bedeutung. Das Benchmarking ist dabei zu einem wichtigen Vergleichs- und Bewertungsinstrument geworden und das Internet wird die Moeglichkeit zukuenftig noch erweitern. Diese sechste Fachtagung ist fuer Hersteller und Betreiber, Planer und Berater sowie die Fachleute aus Verwaltung und Wissenschaft ein umfassendes Forum zur Thermischen Abfallbehandlung geworden. (orig.)

Interaction torque contributes to planar reaching at slow speed

Directory of Open Access Journals (Sweden)

Hoshi Fumihiko

2008-10-01

Full Text Available Abstract Background How the central nervous system (CNS organizes the joint dynamics for multi-joint movement is a complex problem, because of the passive interaction among segmental movements. Previous studies have demonstrated that the CNS predictively compensates for interaction torque (INT which is arising from the movement of the adjacent joints. However, most of these studies have mainly examined quick movements, presumably because the current belief is that the effects of INT are not significant at slow speeds. The functional contribution of INT for multijoint movements performed in various speeds is still unclear. The purpose of this study was to examine the contribution of INT to a planer reaching in a wide range of motion speeds for healthy subjects. Methods Subjects performed reaching movements toward five targets under three different speed conditions. Joint position data were recorded using a 3-D motion analysis device (50 Hz. Torque components, muscle torque (MUS, interaction torque (INT, gravity torque (G, and net torque (NET were calculated by solving the dynamic equations for the shoulder and elbow. NET at a joint which produces the joint kinematics will be an algebraic sum of torque components; NET = MUS - G - INT. Dynamic muscle torque (DMUS = MUS-G was also calculated. Contributions of INT impulse and DMUS impulse to NET impulse were examined. Results The relative contribution of INT to NET was not dependent on speed for both joints at every target. INT was additive (same direction to DMUS at the shoulder joint, while in the elbow DMUS counteracted (opposed to INT. The trajectory of reach was linear and two-joint movements were coordinated with a specific combination at each target, regardless of motion speed. However, DMUS at the elbow was opposed to the direction of elbow movement, and its magnitude varied from trial to trial in order to compensate for the variability of INT. Conclusion Interaction torque was important at

The Swedish market for wood briquettes - Production and market development

Energy Technology Data Exchange (ETDEWEB)

Karlhager, Johan

2008-02-15

from purchased raw material. Planer shavings and saw dust were the raw materials used by the largest number of producers. Peat was another important raw material, used only in large-scale production. Pellet producers were considered being the most important raw material competitor and an analysis showed that pellets constituted a severe threat to the briquette industry as they were important substitute products to briquettes. The analysis also showed that the briquette buyers have a strong bargaining power in their negotiations with the producer

Metallography of Battery Resistance Spot Welds

Science.gov (United States)

Martinez, J. E.; Johannes, L. B.; Gonzalez, D.; Yayathi, S.; Figuered, J. M.; Darcy, E. C.; Bilc, Z. M.

2015-01-01

pre-welded by the manufacturer. This was further complicated as the maximum electrode force was limited to low-electrode force to prevent deflection of the aluminum can during welding. Other Li-ion cells are comprised of smaller diameter cylindrical steel canisters which are inherently capable of handling greater force from the electrodes. Allowing higher-electrode forces aids greatly in insuring a consistent resistance network for the weld. Overall lessons learned: developing good jigs is critical to insure the parts and electrodes are planer to one another and the location of the weld sites remains accurate and repeatable; maintaining strict control over materials is critical--materials must be of a specific hardness and chemical composition to insure that a weld schedule is repeatable; accuracy of the die used to stamp the projections is critical and worth the investment; and proper seasoning of the electrodes is critical to producing consistent welds--once the electrodes have been properly seasoned, cleaning/dressing should be avoided until it is absolutely necessary.

Scanning tuneeling microscopy studies of fivefold surfaces of icosahedral Al-Pd-Mn quasicrystals and of thin silver films on those surfaces

Energy Technology Data Exchange (ETDEWEB)

Unal, Baris [Iowa State Univ., Ames, IA (United States)

2008-01-01

their top planes. Hence, we name them as Pd⁺(with Pd) and Pd-(without Pd). Based on their planer structure and the step height, it can be said that these two families can be viable surface terminations. However, besides the Pd content, these two sets differ in terms of relative densities of their top planes as well as the gap separating the layer from the nearest atomic plane. The experimental data and other arguments lead to the conclusion that the Pd- family is favored over the Pd⁺. This has an important implication on the interpretation of local motifs seen in the high resolution STM images. In other words, the dark stars are not formed by cut-Bergmans rather they are formed by cut-Mackays.

Avaliação ergonômica do ambiente de trabalho em marcenarias no sul do Espírito Santo Ergonomic analysis in joinery workplaces in the south of Espírito Santo

Directory of Open Access Journals (Sweden)

Nilton Cesar Fiedler

2010-10-01

Full Text Available Esta pesquisa foi realizada em marcenarias do Sul do Espírito Santo, com o objetivo de avaliar os fatores do ambiente de trabalho. A coleta de dados foi feita de agosto de 2006 a julho de 2007, em três marcenarias, analisando-se as condições de clima, níveis de ruído, iluminância, vibração, gases, fuligens e poeira. Foi aplicado um questionário semiestruturado para avaliar as condições humanas e de saúde do trabalhador, a segurança e as condições gerais de trabalho. Os resultados indicaram que o Índice de Bulbo Úmido e Termômetro de Globo (IBUTG estavam de acordo com a Norma Regulamentadora n° 15 (atividade moderada, com o mínimo de 25,45 °C às 8 h e o máximo de 26,92 °C às 10 h. Os maiores níveis de ruído foram encontrados no traçador (94,79 dB(A, na tupia (88,9 dB(A, na serra circular (88,66 dB(A, na desempenadeira (88,35 dB(A e na desengrossadeira (88,01dB(A. A iluminância não estava de acordo com os mínimos necessários estabelecidos pela NBR 5413/92, com níveis variando de 304,41 a 1.301,19 lux. Através dos questionários, foi unânime o descontentamento dos marceneiros quanto aos riscos a que estão expostos.This research was carried out in joineries in the South of Espírito Santo to evaluate workplace conditions. Data was colleted in three different joineries from August of 2006 to July of 2007, analyzing climate, noise level, light conditions, vibration, gases, soot and dust at the workplace. A questionnaire was given to evaluate workers´ health conditions, safety and general conditions at work. The results showed that the Index of Humid Bulb and Globe Thermometer (IBUTG was in accordance with NR 15, with a minimum of 25.45°C at 08:00 a.m. and a maximum of 26.92°C at 10:00 a.m. The highest noise levels were found for the cutter (94.79 dB(A, shaper (88.9 dB(A, buzz saw (88.66 dB(A, smoother (88.35 dB(A and planer (88.01dB(A. Light conditions were not in accordance with NBR 5413/92, with levels varying

Multivariate clustering of reindeer herding districts in Sweden according to range prerequisites for reindeer husbandry

Directory of Open Access Journals (Sweden)

Henrik Lundqvist

2009-01-01

samebyar i tio grupper. Den största gruppen, som bestod av 14 samebyar, delades vidare in i 4 undergrupper. Klusteranalyser med 4 olika linkage-varianter användes till att gruppera samebyarna. Principalkomponentsanalys användes för att kartlägga undersökta variabler och de resulterande samebygruppernas karaktär. Samebygrupperna följde inte länsgränser och tre samebyar föll ut som enskilda grupper. Denna undersökning ger underlag för jämförelser mellan samebyar med beaktande av likheter och olikheter i fråga om produktivitet och funktionella särdrag istället för länsgränser och historik. Vi föreslår en ny administrativ indelning i sex områden som skulle kunna fungera som ett alternativt underlag för planering och beslut som rör produktionsaspekter i rennäringen. Resultaten ger också underlag för förutsägelser av förändringar i samebyars produktionsförutsättningar till följd av klimatförändringar.

Wind power goes offshore. European workshop, exhibition and technical tour within the frame of the EU funded project 'German-Polish cross border OPET'

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

vorwiegend Kuestenstandorte genutzt wurden, liegen die Ausbaupotentiale vor allem in Bereichen, die bisher nicht oder nur wenig genutzt wurden. Allerdings erfordern die anderen Standortbedingungen und die technischen Herausforderungen auf See eine sorgfaeltige Planungsabwaegung. Bereits 1991 wurde in Daenemark der Offshore-Windpark Vindeby mit 11 Windkraftanlagn a 450 kW in Betrieb genommen. 1995 folgte der Park Tun diameter Knob mit 10 mal 500 kW. In Deutschland dagegen rechnet man nicht vor 2005 mit der Inbetriebnahme eine Offshore-Windparks. Im gesamten Nord- und Ostseeraum bestehen Planungen zur Errichtung von Offshore-Windenergieanlagen. Doch zunaechst unterliegen vielerorts die gesetzlichen und technischen Rahmenbedingungen einer Ueberpruefung in Bezug auf Naturschutz und Standorteignung. In dem Seminar ''Wind Power goes Offshore'' werden die aktuellen Planungen in Daenemark, Schweden, Polen und Deutschland vorgestellt. Es werden Erfahrungsberichte der bestehenden Anlagen und das Vorgehen bei der Realisierung der neuen Projekte geschildert. Das Seminar und die dazugehoerige Ausstellung sollten zu einem breiten Informationsaustausch und zu einer Vernetzung zwischen den Akteuren auf europaeischer Ebene beitragen. Die Veranstaltung richtete sich an Hersteller, Planer und Betreiber von Windkraftanlagen ebenso wie an Umwelt-/Naturschutzverbaende, Gebietskoerperschaften und Energieversorgungsunternehmen im europaeischen Nord- und Ostseeraum. (orig.)

The Dynamics of an Ongoing Andesitic Eruption: What We Have Learned From Surface Deformation at Soufriere Hills Volcano, Montserrat, BWI

Science.gov (United States)

Mattioli, G.; Herd, R.; Aponte, M.; Dixon, T.; Jansma, P.; Smith, A.

2002-05-01

December 1999 and continues today. Data from each of the distinct periods has been inverted using a modified, downhill simplex method for an elastic half-space. Our code explicitly includes provision for a Mogi-type source and perpendicular opening across a planer dislocation (i.e. dike). All best-fit models have two distinct sub-surface pressure sources (deep Mogi and shallow dike oriented NW) whose initial geometry and magnitude were not fixed a priori. Inferred Mogi depths range from 4.5 to 6.0 km, with changing polarity in time, and the dimensions and inferred opening displacement of the dike have decreased from an initial maximum of ~1 m in each of the three periods. Our observations demonstrate that SHV is also affected by longer-period semi-periodic behavior, similar to that reported by Voight et al. (1998) for very short-period fluctuations on the order of 6-14 hr.

PEMBANGUNAN KAPAL PERIKANAN DI GALANGAN KAPAL TRADISIONAL KALIMANTAN SELATAN

Directory of Open Access Journals (Sweden)

Rusmilyansari Rusmilyansari

2016-06-01

in the traditional shipyard. The study was conducted by Survey. Research conducted shipyard Sewangi Barito Kuala district and village Pagaruyung Tanah Bumbu Regency South Kalimantan. The study was conducted in August through October 2013. Results showed that: ( 1 The level of technology used in the construction of the ship is still relatively low , the equipment used is still using non- electronic equipment ie axes, saws, chisels, pegs, hammer, machetes, bacci, measuring instruments, planers. Only the use of an electric drill workmanship.  The level of technology in the construction of timber ships has not been completed by the calculation of shipping architecture and ship design and construction drawings ; ( 2 type of wood used is Ulin wood, Alaban, Bengkirai, Bungur and Meranti which have a high degree of strength and resistant to attack by marine organisms; ( 3 Stages of development of traditional boats to large ships began with the manufacture of the hull, keel assembly to the deck and transom beam. As for the small boat begins with the manufacture of the vessel tree seedlings. The next stage is good for big ships and small ships are mounting Linggi bow and stern, leather installation vessel up to half the height of the ship, Installation joist left and right, galar installation, installation of ship skin entirely to sheer, sheer installation, flooring installation deck, pemakalan , rig manufacturing of large vessels and final are painting.

Thermodynamics at work - on the limits and potentials of biogeochemical processes

Science.gov (United States)

Peiffer, Stefan

2017-04-01

on the Fe and S side (Peiffer & Wan, 2016; Wan et al, 2014) which will allow for the occurrence of cryptic sulphur cycles, i. e. high turnover of sulphide and sulfate without the appearance of dissolved sulphide species. References Beer, J; Blodau, C (2007): Transport and thermodynamics constrain belowground carbon turover in a northern peatland, Geochim. Cosmochim. Acta, 71, 2989-3002 Blodau, C. (2002). "Carbon cycling in peatlands: A review of processes and controls." Environmental Reviews 10(2): 111-134. Blodau, C; Hoffmann, S; Peine, A; Peiffer, S (1998): Iron and sulfate reduction in the sediments of acid mine lake 116 (Brandenburg, Germany): Rates and geochemical evaluation, Water, Air and Soil Pollution, 108, 249-270 Peiffer, S., Wan M. (2016) Reductive Dissolution and Reactivity of Ferric (Hydr)oxides, in Faivre, D., Iron Oxides: From Nature to Applications, Wiley-VCH, chapter 3, 29-51 Peine, A; Küsel, K; Tritschler, A; Peiffer, S (2000): Electron flow in an iron-rich acidic sedimant - evidence for an acidity-driven iron cycle, Limnol. Oceanogr., 45(5), 1077-1087 Stumm, W.; Morgan, J. J. (1996): Aquatic Chemistry, Wiley Wan, M., Shchukarev, A., Lohmayer, R., Planer-Friedrich, B., Peiffer, S. (2014) Occurrence of surface polysulfides during the interaction between ferric (hydr)oxides and aqueous sulfide. Environmental Science and Technology, 48, 5076-5084

Experimental quantification of transient stretch effects from vortices interacting with premixed flames

Science.gov (United States)

Danby, Sean James

conducted using non-invasive laser diagnostics, such as particle image velocimetry and planer laser induced fluorescence of the OH radical. The dependence of heat release rate on temperature provides an estimation of the strain rate dependence of the reaction rate. Findings include a direct effect of stretch rate on temperature along the flame reaction zone; however the trend depends on thermo-diffusive stability. For both fuels at a thermo-diffusively unstable mixture, by increasing the vortex strength, the stretch rate increases, while the temperature decreases. The thermo-diffusively stable flames (propane with φ ≤ 1.08) generally show an opposite trend to the unstable flames. By increasing the vortex strength, the thermo-diffusively stable flames tend to have a reduction in stretch rate, which allows an increase in temperature along the flame-vortex interface. Overall, an increase in stretch rate causes all flames to reduce the average reaction zone temperature regardless of thermo-diffusive stability. The formation of surface structure corrugation in thermo-diffusively unstable flames requires an external (to the flame) perturbation. This perturbation is generally in the form heat loss due to either a high stretch rate from an aerodynamic perturbation (vortex) or a localized thermodynamic heat sink (electrodes).

Effects of adding whole body vibration to squat training on isometric force/time characteristics.

Science.gov (United States)

Lamont, Hugh S; Cramer, Joel T; Bemben, Debra A; Shehab, Randa L; Anderson, Mark A; Bemben, Michael G

2010-01-01

Resistance training interventions aimed at increasing lower-body power and rates of force development have produced varying results. Recent studies have suggested that whole-body low-frequency vibration (WBLFV) may elicit an acute postactivation potentiation response, leading to acute improvements in power and force development. Potentially, the use of WBLFV between sets of resistance training rather than during training itself may lead to increased recruitment and synchronization of high-threshold motor units, minimize fatigue potential, and facilitate the chronic adaptation to resistance exercise. The purpose of this study was to determine the effects of applying TriPlaner, WBLFV, prior to and then intermittently between sets of Smith machine squats on short-term adaptations in explosive isometric force expression. Thirty recreationally resistance trained men aged 18-30 were randomly assigned to 1 of 3 groups: resistance training only (SQT, n = 11), resistance plus whole-body vibration (SQTV, n = 13), or active control (CON, n = 6). An isometric squat test was performed prior to and following a 6-week periodized Smith machine squat program. Whole-body low-frequency vibration was applied 180 seconds prior to the first work set (50 Hz, 2-4 mm, 30 seconds) and intermittently (50 Hz, 4-6 mm, 3 x 10 seconds, 60 seconds between exposures) within a 240-second interset rest period. Subjects were instructed to assume a quarter squat posture while positioning their feet directly under their center of mass, which was modified using a handheld goniometer to a knee angle of 135 +/- 5 degrees . Instructions were given to subjects to apply force as fast and as hard as possible for 3.5 seconds. Isometric force (N) and rates of force development (N.s(-1)) were recorded from the onset of contraction (F(0)) to time points corresponding to 30, 50, 80, 100, 150, and 250 milliseconds, as well as the peak isometric rate of force development (PISORFD), and rate of force development to

Bone scintigraphy in post-SARS patients and compared with magnetic resonance imaging

International Nuclear Information System (INIS)

Wang Qian; Huang Lili; Qin Shuling

2004-01-01

Objective: To study the characteristics of bone scintigraphy in post-SARS patients and evaluate the usefulness of bone scintigraphy in the prediction of avascular osteonecrosis (AVN) comparing with the MR imaging.. Methods: Our study included 66 patients who were diagnosed as SARS based on the diagnostic criteria issued by the Ministry of Health of China (MHC), including 46 women and 20 men. Their ages ranged from 19 to 63 years (mean, 31.6±0.1 years). All of the patients were treated with methyprednisonlone, rabavirin, broad spectrum antimicrobials and supportive therapy. Dosage of methyprednisonlone was 80∼800 mg/d for 4-72 days. Of them, varied seat of joint pain occurred in 47 patients 3 to 18 weeks after the onset of SARS. Since multiple joints were involved in many patients, bone scintigraphy was performed for screening AVN. The other 19 patients without of evident joint pain were also examined as their demand. Informed consents were obtained in all of the examined patients. No previously joint pain or trauma history was found in this group of patients. Of the 66 patients, planer X-ray was performed in 34 of the symptomatic patients previous to the scintigraphy, but it was negative in all. MR examination was performed in 54 patients before or after the scintigraphy, and the interval between two the tests was average of 8 days (range, 0 to 30 days). In addition, 27 consecutive cases aged lower than 45 years (mean, 40.4±0.8 years) with breast cancer who underwent bone scintigraphy for screening metastastic disease and had negative results were also involved as a control group. Whole body skeletal scintigraphy was performed 3 hours after intravenous administration of technetium-99m methylene-diphosphonate 740 MBq. Increased uptake lesion seen in the limb joints was defined as positive, but 'hot patella' sign was considered to be non diagnostic value. When a lesion was found in the whole body imaging, corresponding regional image was further taken. Two

The Norwegian curriculum in history and historical thinking: a case study of three lower secondary schools

Directory of Open Access Journals (Sweden)

Lisbeth Bergum Johanson

2015-03-01

learn and work thoroughly with the concepts of historical thinking.Sammendrag I tråd med samfunnsendringer og endringer i skolen har historiedidaktikken og læreplanene i historie blitt endret for å gjøre historiefaget mer relevant for elevene i dag. For å utvikle elevenes kritiske tenkning og historieforståelse bør elevene tilegne seg både ”vite at- kunnskap” og ”vite hvordan - kunnskap”. En måte å fremme historieforståelse på, er gjennom introduksjon av historisk tenkning. Studier utført i klasserommet viser imidlertid at historieundervisningen fortsatt er forholdsvis tradisjonell i den forstand at lærebøker i historie anvendes ukritisk, uten å problematisere hvordan historie konstrueres eller hvorfor historie er viktig både i dag og for fremtida. Denne artikkelen ser på hvorvidt og hvordan historisk tenkning fremmes og anvendes i tre ulike skoler på ungdomstrinnet. Lærebøker i historie, ukeplaner, halvårsplaner, prøver og oppgaver danner hovedgrunnlaget for empirien i denne undersøkelsen. Funnene i undersøkelsen viser at historisk tenkning er lite tydelig i lærebøker, planer eller i prøver og oppgaver. Samtidig ser det ut til at det fokuseres mer på reproduksjon enn refleksjon i klasserommet, noe som vanskeliggjør historisk forståelse. Det foreslås derfor at både lærere og studenter arbeider mer grundig med historisk tenkning. Nøkkelord: Historiedidaktikk, historieforståelse, historisk tenkning, læreplaner

Three essays on regulated markets. Renewable energies, hospital competition and health insurance

Energy Technology Data Exchange (ETDEWEB)

Unfried, Matthias

2012-11-15

only private hospitals exist. Considering the German regulatory framework it is shown that a non-profit hospital disciplines profit maximizing ones and hence, ensures a higher treatment quality and a lower treatment fee. Furthermore, it is shown that the degree of market coverage depends on the costs of quality provision and that the existence of non-profit hospitals, ceteris paribus, ensures a higher degree of market coverage. Last, it is analyzed how the market outcome is influenced by the type of welfare function. It is distinguished between two welfare criteria: first, a utilitarian welfare function and second, a Rawlsian type of welfare function. It is shown that the welfare criterion should be chosen according to the market size. The fourth chapter examines the health insurance market for outpatient care. In several health systems, insurees of a certain insurance company have to consult physicians which are affiliated to the same insurance company. If this is the case, the insurance market features characteristics of a two-sided market where the insurance company competes on one market sides for insurees and for physicians on another market side. Once the participation decision of both sides has been made, however, the physicians of one insurance company compete for insurees of the same insurance. This intra-platform competition and its effect on the two-sided market is analyzed in this chapter. It is shown that intra-platform competition induces negative network effects, i.e., a higher number of physicians reduces the number of insurees. Moreover, the number of physicians is reduced by the insurance company if the probability of illness increases. Last, the market is compared to a market where a social planer regulates insurance fees. It is shown that regulation is not necessary since the unregulated market already results in a second-best solution.

Pharmacological study of 99mTc-CO-MIBI, a new mycoardial perfusion imaging agent comparison to 99mTc-MIBI

International Nuclear Information System (INIS)

Zhao Jiandong; Wang Jincheng; Mi Hongzhi

2004-01-01

pharmacokinetics parameters, biodistribution, T/NT radios were collected and calculated during and after the imaging. Moreover, the whole body image, heart planer scintigraphy and tomography were investigated on pharmacodynamics. The same procedure were performed to 99m Tc-MIBI. Results:Blood-pool clearance of 99m Tc-CO-MIBI was modeled and found to be biexponential during 2 hours after injection. The pharmacokinetics conform to two-compartment with 436.36±54.77 ml/h of blood clearance (CL) and half lives T α(1/2 ))=l.46±0.13 min for the fast early clearance, T β(1/2) =97.3+20.51 min for the slow late clearance. The clearance kinetics were faster than 99m Tc-MIBI which of CL=25 8.76±27.88 ml/h, T α(1/2) =2.21±0.09 min, T β(1/2) =163±14.1 min, respectively. The time-radioactivity curves showed that the pulmonary uptake curves were the lowest, the hepatic uptake curves were above the hearts early but descending so quickly as to start bellowing the heart curves at about 40min which were significant difference of 99m Tc-MIBI. To the latter, the liver curves were above the myocardial uptake curves sustained over 2 hours period post injection. The heart uptake ID% of 99m Tc-CO-MIBI were more than that of 99m Tc-MIBI at 10, 30, 60, 90, 120 min. The heart-lung and heart-liver ratios were also significantly different. For 99m Tc-CO-MIBI, they were 3.18±0.08 and 1.05±0.05 by 40 min while 99m Tc-MIBI 2.87±0.11 and 0.70±0.05, respectively. The planar and SPECT imaging of excellent quality during 10 to 120 min demonstrated that 99m Tc-CO-MIBI was high absorbed initially by myocardium and quickly clearance from liver. The whole body image show that the radioactivity mostly removed to the gallbladder and the intestines either. We can obtain perfect myocardial image without liver activity disturbance in condition of no extra fatty diets Conclusions: The result of this study suggested that the single alkaline component 99m Tc-CO-MIBI solution had better pharmacokinetics properties and

Mechanisms for strain localization within Archaean craton: A structural study from the Bundelkhand Tectonic Zone, north-central India

Science.gov (United States)

Sarkar, Saheli; Patole, Vishal; Saha, Lopamudra; Pati, Jayanta Kumar; Nasipuri, Pritam

2015-04-01

part of Bundelkhand Craton are characterized by the development of at least three stages of folding. The penetrative foliation in the TTG is characterized by the parallel alignment of biotite and amphibole (S2). In the low-strain domains, the S2 foliation is axial planer to the small scale root less hinges (F2) of mafic boudins and anatectic leucosomes (S1). The presence of hook-shaped fold on the mafic and anatectic leucozomal layers indicates that co-axial nature of F1 and F2 folds. In general, the F2 axial planes (S2) are oriented in NNW-SSE direction. The F2 fold axes are generally north trending with sub-vertical plunge (550 -> 0060N). The intensity and tightness of last stage of folding is prominent in the leucocratic layers and is characterized by the development of open warps with E-W trending axial planes. However, the effect of F3 is not prominent in the mafic layers. Locally, small scale E-W displacement in the mafic bands corresponds to the E-W trending F3 axial plane in the leucosomes. In contrast to the TTGs, the supracrustal rocks are devoid of melting and compositional segregation. The supracrustal units are characterized by the development of E-W trending fabric. The development of tight to isoclinal folds in the leucosomes of TTGs indicates the F1 folding in the partially molten TTG occurred in the anatectic conditions. The presence of melt decreases the effective viscosity of the rock and promotes the development of tight to isoclinal folds in the F1 and F2 phases. It is also suggested that the segregation of the melt during the first and second phases of folding again increases the strength of the restite and is manifested by the development of small scale E-W displacements. The study demonstrated the change in the strength of a segment of Archaean crust due to the limited availabiliy of melt during deformation. The presence of three stages of deformation in the TTGs and E-W trending fabric in banded iron formation and quartzite indicate the opening

Combustion characterization of rape seed meal and suggestions for optimal use in combustion appliances; Foerbraenningskarakterisering av rapsmjoel och foerslag till optimalt nyttjande i olika foerbraenningsanlaeggningar

Energy Technology Data Exchange (ETDEWEB)

Eriksson, Gunnar; Hedman, Henry; Oehman, Marcus; Bostroem, Dan; Pettersson, Esbjoern; Pommer, Linda; Lindstroem, Erica; Backman, Rainer; Oehman, Rikard

2007-12-15

When rape oil is chemically extracted, rape seed meal, a solid residue remains. Currently, it is used as animal feed. Several plants for the production of rape methyl ester (RME, biodiesel) are in operation or under construction. Combustion properties have been studied for rape seed meal produced as a by product to rape-methyl esther (RME, biodiesel). Composition of the material has been measured, using proximate and ultimate analysis. The lower heating value was 18.2 +- 0.3 MJ/kg d.w. and the ash content was 7-8 percent d.w. The material is rich in nitrogen and sulphur. Concentrations of K, P, Ca and Mg are high in the fuel. Rape seed meal was mixed with bark and pelletised. Bark pellets were also used as a reference fuel. Pellets with 10 and 30 percent rape seed meal were produced. Material with 80 percent rape seed meal and 20 percent planer shavings was also pelletised. Wood had to be added to provide enough friction in the pelletising process, with adapted equipment rape seed meal could probably be easily pelletised). The material was studied using Thermo-Gravimetric Analysis (TGA), and compared with data from tests with wood powder. The pyrolysis of the rape seed meal has a characteristic temperature of 320 deg C. Devolatilisation starts at 150 deg C (at a lower temperature than for wood powder), and proceeds within a rather wide temperature range. The probable cause is the difference in organic content, in particular protein content. The result does not suggest that the material will be difficult to ignite. Experiments in a bench-scale fluidised bed (5 kW) showed that pellets containing only bark, and the mixture rape seed meal/wood had a bed agglomeration temperature well over the normal operational bed temperature. For the fuel mixtures rape seed meal and bark, the agglomeration temperature was slightly over the operational temperature. Particle emissions from fluidised bed combustion and grate combustion were, the latter simulated using a commercial