WorldWideScience

Sample records for piping design kakugi

  1. Basic studies on computer aided concurrent engineering for hull structure design and piping design; Kakugi ittai wo koryoshita doji heikotekina sekkei no shien ni kansuru kisoteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Aoyama, K.; Sawada, K. [The University of Tokyo, Tokyo (Japan)

    1996-12-31

    Considering integrated hull and piping design in shipbuilding industry as a good example for concurrent engineering (CE), discussions were given on a computer aided method to perform integrated hull and piping design smoothly. When CE aiding by means of a computer is considered, it is important to discuss a method for information management not only for `utilization of product models`, but also for `maintaining consistency between items of product information` and `concurrent utilization and production of product information` in concurrent designs. For the CE aided information management, utilization and production of the product information is effective if restrictive relationship between items of product information, and design functions are made clear. Definitions were given on the restrictive relationship between items of product information and `restrictive relationship information` that has `decision/provisional decision`, `date and time`, `designer` and `design functions`. Furthermore, `comprehensive relationship between items of product information` that can be produced from the restrictive relationship information was defined as a `restrictive network`. Utilizing the restrictive relationship between items of product information for CE aiding is effective. 9 refs., 14 figs.

  2. Fundamentals of piping design

    CERN Document Server

    Smith, Peter

    2013-01-01

    Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

  3. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  4. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A

    2011-01-01

    Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

  5. Flat heat pipe design, construction, and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

    1999-08-02

    This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

  6. Preliminary Design of IHTS Piping Support for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nak-Hyun; Koo, Gyeong-Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A pipe support is a designed element that transfer the load from pipe to the supporting structures. Providing sufficient pipe wall thickness and installing proper supports are most important elements for structural integrity of the piping system. Piping supports are generally referred to as device used in supporting the weight of the piping. The weight includes that of the pipe proper, the content the pipe carries, and the pipe converting, such as insulation. A FE analysis was performed to select variable spring hanger of IHTS hot-leg piping for PGSFR. The calculated values will be used to design variable spring hanger.

  7. Heat pipes theory, design and applications

    CERN Document Server

    Reay, David; Kew, Peter

    2013-01-01

    Heat Pipes, 6th Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students. This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all informat

  8. 49 CFR 192.121 - Design of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of plastic pipe. 192.121 Section 192.121... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.121 Design of plastic pipe. Subject to the limitations of § 192.123, the design pressure for plastic pipe is determined by either of...

  9. 49 CFR 192.105 - Design formula for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design formula for steel pipe. 192.105 Section 192... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.105 Design formula for steel pipe. (a) The design pressure for steel pipe is determined in accordance with the following...

  10. 46 CFR 153.280 - Piping system design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping system design. 153.280 Section 153.280 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.280 Piping system design. (a) Each cargo piping system must...

  11. 49 CFR 192.125 - Design of copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of copper pipe. 192.125 Section 192.125... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.125 Design of copper pipe. (a) Copper pipe used in mains must have a minimum wall thickness of 0.065 inches (1.65 millimeters) and must be...

  12. 49 CFR 192.123 - Design limitations for plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design limitations for plastic pipe. 192.123... Design limitations for plastic pipe. (a) Except as provided in paragraph (e) and paragraph (f) of this section, the design pressure may not exceed a gauge pressure of 100 psig (689 kPa) for plastic pipe...

  13. Optimization Design and Application of Underground Reinforced Concrete Bifurcation Pipe

    Directory of Open Access Journals (Sweden)

    Chao Su

    2015-01-01

    Full Text Available Underground reinforced concrete bifurcation pipe is an important part of conveyance structure. During construction, the workload of excavation and concrete pouring can be significantly decreased according to optimized pipe structure, and the engineering quality can be improved. This paper presents an optimization mathematical model of underground reinforced concrete bifurcation pipe structure according to real working status of several common pipe structures from real cases. Then, an optimization design system was developed based on Particle Swarm Optimization algorithm. Furthermore, take the bifurcation pipe of one hydropower station as an example: optimization analysis was conducted, and accuracy and stability of the optimization design system were verified successfully.

  14. STRUCTURE DESIGN OF THE BEIJING SPECTROMETER Ⅲ BEAM PIPE

    Institute of Scientific and Technical Information of China (English)

    ZHENG Lifang; JI Quan; WANG Li; LI Xunfeng; XU Shaowang; DONG Sujun; ZHAO Libin; LIU Jianping

    2008-01-01

    The Beijing spectrometer Ⅲ (BESⅢ) beam pipe is in the center of the BESⅢ, which is the detector of the upgrade project of Beijing electron and positron collider (BEPCⅡ). Electrons and positrons collide in the BESⅢ beam pipe. According to the demands of the BEPCⅡ, a key program of Chinese Academy of Sciences, the BESⅢ beam pipe is designed based on the finite elements analysis. The BESⅢ beam pipe is installed in the inner cylinder of the BESⅢ drift chamber. As a vacuum tube, the BESⅢ beam pipe is designed as 1 000 mm in length, 63 mm in inner diameter and 114 mm in outer diameter, respectively. The BESⅢ beam pipe consists of a central beryllium pipe cooled by EDM-1, the oil No.1 for electric discharge machining, and two extended copper pipes cooled by deionized water (DW). The three parts are jointed by vacuum welding. Factors taken into account in the design are as follows. ① The wall thickness of the central beryllium pipe should be designed as small as possible to reduce the multi-scattering and improve the particle momentum resolution. And the wall thickness of the extended copper pipe should be designed as large as possible to protect the detectors from the backgrounds. ② The BESⅢ beam pipe must be sufficiently cooled to avoid the damage and prevents its influence to the BESⅢ drift chamber (DC) operation. The inner surface temperature of the DC inner cylinder must be maintained at 293±2 K. ③ The magnetic permeability of the materials used in the BESⅢ beam pipe must be less than 1.05 H/m to avoid large magnetic field distortions. ④ The static pressure of the vacuum chamber of the BESⅢ beam pipe must be less than 800 (Pa. The simulating results show that the designed structure of the BESⅢ beam pipe satisfies the requirements mentioned above. The structure design scheme is evaluated and adopted by the headquarters of BEPCⅡ.

  15. Piping structural design for the ITER thermal shield manifold

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Chang Hyun, E-mail: chnoh@nfri.re.kr [ITER Korea, National Fusion Research Institute, Daejeon 305-333 (Korea, Republic of); Chung, Wooho, E-mail: whchung@nfri.re.kr [ITER Korea, National Fusion Research Institute, Daejeon 305-333 (Korea, Republic of); Nam, Kwanwoo; Kang, Kyoung-O. [ITER Korea, National Fusion Research Institute, Daejeon 305-333 (Korea, Republic of); Bae, Jing Do; Cha, Jong Kook [Korea Marine Equipment Research Institute, Busan 606-806 (Korea, Republic of); Kim, Kyoung-Kyu [Mecha T& S, Jinju-si 660-843 (Korea, Republic of); Hamlyn-Harris, Craig; Hicks, Robby; Her, Namil; Jun, Chang-Hoon [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France)

    2015-10-15

    Highlights: • We finalized piping design of ITER thermal shield manifold for procurement. • Support span is determined by stress and deflection limitation. • SQP, which is design optimization method, is used for the pipe design. • Benchmark analysis is performed to verify the analysis software. • Pipe design is verified by structural analyses. - Abstract: The thermal shield (TS) provides the thermal barrier in the ITER tokamak to minimize heat load transferred by thermal radiation from the hot components to the superconducting magnets operating at 4.2 K. The TS is actively cooled by 80 K pressurized helium gas which flows from the cold valve box to the cooling tubes on the TS panels via manifold piping. This paper describes the manifold piping design and analysis for the ITER thermal shield. First, maximum allowable span for the manifold support is calculated based on the simple beam theory. In order to accommodate the thermal contraction in the manifold feeder, a contraction loop is designed and applied. Sequential Quadratic Programming (SQP) method is used to determine the optimized dimensions of the contraction loop to ensure adequate flexibility of manifold pipe. Global structural behavior of the manifold is investigated when the thermal movement of the redundant (un-cooled) pipe is large.

  16. Design and Experimental Research on a New Pipe Rupture Valve

    Institute of Scientific and Technical Information of China (English)

    HU Guo-liang; XU Bing; YANG Hua-yong; ZHANG Yi-ding

    2006-01-01

    A new pipe rupture valve for hydraulic elevator is designed.Mathematical models established for the hydraulic elevator system are used in numefical simulations on the Simulink environment of Matlab kits.The effects of different viscous damping diameters.inlet pressures of pipe rupture valve.and elevator loads on the hydraulic elevator system's dynamic performance are analyzed.Expefimenml research is also carried out using a hydraulic elevator experiment rig.The numerical simulations accord with experimental results in general.Dynamic performance indexes are assessed by the EN812 standard.The results show that the newly designed pipe rupture valve meets the designing requirement for hydraulic elevators.

  17. Study on design pressure of in-service welding pipes

    Institute of Scientific and Technical Information of China (English)

    XUE Xiaolong; ZHU Jiagui; SANG Zhifu

    2006-01-01

    A method of predicting design pressure and burn-through of in-service welding pipes was established. Temperature distributions of in-service welding under variable parameters were simulated by FEM. The effect of flowing of internal media was regarded as forced convection. Based on the numerical results, design pressure of the pipe can be obtained and burn-through can be predicted. It can be concluded that the design pressure decreases with the increasing of heat input. RSF and design pressure of the pipe increase with the increasing of flow rate. There is a range in which the increase changes greatly. For in-service welding, the range should be considered adequately to determine operating condition optimally. RSF increases with the increasing of pipe wall thickness. While the thickness increases to an extent, RSF shows little increase. According to the curves of design pressure versus different parameters, safe working pressure can be achieved.

  18. Design and evaluation of a heat pipe exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.H.; Zeigler, E.

    1982-06-01

    A promising approach to energy conservation is the use of heat pipes to recover heat now lost in effluent processing wastewater streams. At Radford Army Ammunition Plant a prototype water-to-water heat pipe heat exchanger (HPHX) was evaluated. Heat was extracted from wastewater and recovered heat then used to preheat incoming fresh water. The heat pipe is schematicized. Design objectives--access to wasterwater section, provision for periodic inspection--are specified. Based on these objectives the HPHX design is shown. A performance analysis is carried out by means of equations. Based on mobilization rates at Radford, a savings of significant amount will be realized.

  19. Design and cooling of BESIII beryllium beam pipe

    Science.gov (United States)

    Li, Xunfeng; Ji, Quan; Wang, Li; Zheng, Lifang

    2008-01-01

    The beryllium beam pipe was restructured according to the requirements of the upgraded BESIII (Beijing Spectrometer) experiment. SMO-1 (sparking machining oil no. 1) was selected as the coolant for the central beryllium beam pipe. The cooling gap width of the beryllium beam pipe was calculated, the influence of concentrated heat load on the wall temperature of the beryllium beam pipe was studied, and the optimal velocity of the SMO-1 in the gap was determined at the maximum heat load. A cooling system for the beam pipe was developed to control the outer wall temperature of the beam pipe. The cooling system is reported in this paper with regard to the following two aspects: the layouts and the automation. The performance of the cooling system was tested on the beam pipe model with trim size. The test results show that the design of the beryllium beam pipe is reasonable and that the cooling system achieves the BESIII experimental aim. The cooling system has already passed the acceptance test and has been installed in position. It will be put into practice for the BESIII experiment in 2008.

  20. Optimal design of the separate type heat pipe heat exchanger

    Institute of Scientific and Technical Information of China (English)

    YU Zi-tao; HU Ya-cai; CEN Ke-fa

    2005-01-01

    Separate type heat pipe heat exchangers are often used for large-scale heat exchanging. The arrangement of such a heat exchanger conveniently allows heat input to and output from the heat exchanger at remote locations. The traditional method of designing an ordinary HPHE (heat pipe heat exchanger) is commonly applied in the separate type exchanger design, but the calculations have to be carried out separately, which makes it very complicated. In this work, the ε-NTU (effectiveness-Number of Transfer Units) method was applied for optimization analysis of single- or multi-level separate type heat pipe heat exchangers. An optimizing formula for single-level separate type heat pipe heat exchangers was obtained. The optimizing principles of effectiveness-NTU and heat transfer rate by the equal distribution method for multi-level separate type heat pipe heat exchanger are presented. The design of separate type heat pipe heat exchangers by the optimizing method is more convenient and faster than by the traditional method.

  1. Rapidly design safety relief valve inlet piping systems

    Energy Technology Data Exchange (ETDEWEB)

    Westman, M.A.

    1997-03-01

    Safety relief valves (SRVs) used to protect against overpressure require well-designed inlet piping for proper operation. The engineer`s job is to produce these designs from a thorough understanding of the inlet piping as a key component in the safety relief system and the correct application of the governing fluid dynamics principles. This article will present a technique for analysis and design using classical ideal-gas adiabatic fluid flow principles. Also, it will discuss the advantages of using the personal computer (PC) to quickly arrive at accurate designs. This work applies to SRVs in which relief flows are limited by sonic conditions at their nozzles.

  2. Design of shape memory alloy pipe couplers: modeling and experiments

    Science.gov (United States)

    Tabesh, Majid; Atli, Kadri C.; Rohmer, John; Franco, Brian E.; Karaman, Ibrahim; Boyd, James G.; Lagoudas, Dimitris C.

    2012-04-01

    Shape memory alloy (SMA) pipe couplers use the shape memory effect to apply a contact pressure onto the surface of the pipes to be coupled. In the current research, a SMA pipe coupler is designed, fabricated and tested. The thermally induced contact pressure depends on several factors such as the dimensions and properties of the coupler-pipe system. Two alloy systems are considered: commercially-available NiTiNb couplers and in-house developed NiTi couplers. The coupling pressure is measured using strain gages mounted on the internal surface of an elastic ring. An axisymmetric finite element model including SMA constitutive equations is also developed, and the finite element results are compared with the experimental results.

  3. A Novel Crawling In-pipe Robot Design

    Directory of Open Access Journals (Sweden)

    Xu Kejie

    2016-01-01

    Full Text Available A novel crawling in-pipe robot was designed to improve the adaptive ability with self-locking principle applied. In the moving, the robot was adaptable to horizontal, vertical and bending pipes with different diameters and sections without exerting additional pressure to the shell. The robot used a telescopic umbrella stand as a basic structure. The force of telescopic mechanism, self-locking principle of supporting mechani sm and shell were deduced from design requirements. The design of supporting and coupling mechanism was completed. The relationship between screw rod thrust and parallelogram driving force was established. A prototype was made and tested according to the suggested design methods. The results show that the robot with powerful traction, good self-locking performance and smooth passage through curve can move forward in the pipe with 90~150 mm inner diameter.

  4. Piping and pipeline calculations manual construction, design fabrication and examination

    CERN Document Server

    Ellenberger, Philip

    2010-01-01

    The lack of commentary, or historical perspective, regarding the codes and standards requirements for piping design and construction is an obstacle to the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner who want to provide a safe and economical piping system. An intensive manual, this book will utilize hundreds of calculation and examples based on of 40 years of personal experiences of the author as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. This book is a ?no non

  5. Evaluation of aluminum drill-pipe material and design

    Energy Technology Data Exchange (ETDEWEB)

    Placido, Joao C. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Lourenco, Marcelo I.; Netto, Theodoro Antoun [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)

    2008-07-01

    Experimental program and numerical analyses were carried out to investigate the fatigue mechanisms of aluminum drill pipes designed and manufactured in compliance with ISO 15546. The main objective is to improve the fatigue performance of these components by selecting the appropriate aluminum alloy and by enhancing the mechanical design of the threaded steel connector. This paper presents the experimental test program and numerical analyses conducted on a drill-pipe of different materials (Al-Cu-Mg and Al-Zn-Mg system aluminum alloys) and geometry. Material mechanical properties, including S-N curve, were determined through small-scale tests on specimens cut from actual drill pipes. Full-scale experiments were also performed in laboratory. A finite element model of the drill pipe, including the tool-joint region, was developed. The model simulates, through different load steps, the tool-joint hot assembly, and then reproduces the physical experiments numerically in order to obtain the actual stress distribution. Good correlation between full-scale and small-scale fatigue tests was obtained by adjusting the strain/stress levels monitored in the full-scale tests in light of the numerical simulations and performing fatigue life calculations via multiaxial fatigue models. The weak points of the current practice design are highlighted for further development. (author)

  6. 49 CFR 192.111 - Design factor (F) for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design factor (F) for steel pipe. 192.111 Section... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.111 Design factor (F) for steel pipe. (a) Except as otherwise provided in paragraphs (b), (c), and (d) of this section, the...

  7. Design of megawatt power level heat pipe reactors

    Energy Technology Data Exchange (ETDEWEB)

    Mcclure, Patrick Ray [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Poston, David Irvin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reid, Robert Stowers [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-12

    An important niche for nuclear energy is the need for power at remote locations removed from a reliable electrical grid. Nuclear energy has potential applications at strategic defense locations, theaters of battle, remote communities, and emergency locations. With proper safeguards, a 1 to 10-MWe (megawatt electric) mobile reactor system could provide robust, self-contained, and long-term power in any environment. Heat pipe-cooled fast-spectrum nuclear reactors have been identified as a candidate for these applications. Heat pipe reactors, using alkali metal heat pipes, are perfectly suited for mobile applications because their nature is inherently simpler, smaller, and more reliable than “traditional” reactors. The goal of this project was to develop a scalable conceptual design for a compact reactor and to identify scaling issues for compact heat pipe cooled reactors in general. Toward this goal two detailed concepts were developed, the first concept with more conventional materials and a power of about 2 MWe and a the second concept with less conventional materials and a power level of about 5 MWe. A series of more qualitative advanced designs were developed (with less detail) that show power levels can be pushed to approximately 30 MWe.

  8. Assessment of LWR piping design loading based on plant operating experience

    Energy Technology Data Exchange (ETDEWEB)

    Svensson, P. O.

    1980-08-01

    The objective of this study has been to: (1) identify current Light Water Reactor (LWR) piping design load parameters, (2) identify significant actual LWR piping loads from plant operating experience, (3) perform a comparison of these two sets of data and determine the significance of any differences, and (4) make an evaluation of the load representation in current LWR piping design practice, in view of plant operating experience with respect to piping behavior and response to loading.

  9. Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 2. Evaluation of seismic designs: a review of seismic design requirements for Nuclear Power Plant Piping

    Energy Technology Data Exchange (ETDEWEB)

    1985-04-01

    This document reports the position and recommendations of the NRC Piping Review Committee, Task Group on Seismic Design. The Task Group considered overlapping conservation in the various steps of seismic design, the effects of using two levels of earthquake as a design criterion, and current industry practices. Issues such as damping values, spectra modification, multiple response spectra methods, nozzle and support design, design margins, inelastic piping response, and the use of snubbers are addressed. Effects of current regulatory requirements for piping design are evaluated, and recommendations for immediate licensing action, changes in existing requirements, and research programs are presented. Additional background information and suggestions given by consultants are also presented.

  10. Report of the US Nuclear Regulatory Commission Piping Review Committee. Volume 2. Evaluation of seismic designs: a review of seismic design requirements for Nuclear Power Plant Piping

    Energy Technology Data Exchange (ETDEWEB)

    1985-04-01

    This document reports the position and recommendations of the NRC Piping Review Committee, Task Group on Seismic Design. The Task Group considered overlapping conservation in the various steps of seismic design, the effects of using two levels of earthquake as a design criterion, and current industry practices. Issues such as damping values, spectra modification, multiple response spectra methods, nozzle and support design, design margins, inelastic piping response, and the use of snubbers are addressed. Effects of current regulatory requirements for piping design are evaluated, and recommendations for immediate licensing action, changes in existing requirements, and research programs are presented. Additional background information and suggestions given by consultants are also presented.

  11. Influence of structural design condensing part of NH3 heat pipe to heat transfer

    Directory of Open Access Journals (Sweden)

    Vantúch Martin

    2014-03-01

    Full Text Available The article describes influence design heat exchangers to efficiency condensation liquid ammonia in the gravitational heat pipe. Analyse adverse factors in the operation and flow of ammonia in heat pipe. Also describes heat transfer characteristics of heat pipe in low-potential geothermal heat transport simulations.

  12. Design guidelines for PWR pressurizer safety and relief valve discharge piping to minimize potential operating and piping qualification problems

    Energy Technology Data Exchange (ETDEWEB)

    Adams, T.M.; Chang, K.C.; Campbell, T.E.

    1982-01-01

    General system design considerations such as functional requirements, valve types and operation, and various loading conditions are discussed. General guidelines for the piping layout, support design, and embedment selection are presented and discussed. Also presented and discussed are potential system operating problems which can arise from an improper design. 3 refs.

  13. Design and Fabrication of a Novel Hybrid-Structure Heat Pipe for a Concentrator Photovoltaic

    Directory of Open Access Journals (Sweden)

    Heiu-Jou Shaw

    2012-10-01

    Full Text Available This study presents a design method to fabricate a novel hybrid-structure flat plate heat pipe (NHSP heat pipe for a concentrator photovoltaic. The NHSP heat pipe is composed of a flattened copper pipe and a sintered wick structure, and a coronary-stent-like rhombic copper mesh supports the structure. The coronary-stent-like supporting structure enhances the mechanical strength and shortens the reflux path of the working fluid. Experiments demonstrate that the sintered capillary heat pipe reduces the thermal resistance by approximately 72%, compared to a traditional copper mesh-screen heat pipe. Furthermore, it can reduce thermal resistance by 65% after a supporting structure is added to the heat pipe. The results show that the NHSP heat pipe provided the best performance for the concentrator photovoltaic, which can increase photoelectric conversion efficiency by approximately 3.1%, compared to an aluminum substrate.

  14. Design of deepwater HP/HT pipe-in-pipe flowlines crossing mega-furrows in the Gulf of Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Tianxi Andy; Chacko, Jacob; Zhou, Mengjuan Jane; Omonoji, Gabriel O. [TECHNIP USA, Houston, TX (United States); Eigbe, Uwa [INTECSEA, Houston, TX (United States)

    2009-07-01

    Two 12-mile long pipe-in-pipe (PIP) with HT/HP flow lines were recently designed for the Chinook offshore oil field in the Gulf of Mexico. The routes of the flow line of the Chinook crosses continuous mega-furrows at the water depth ranging from 8200 ft to 8800 ft. The design of the temperature and pressure of the flow lines were 250 deg F and 12,684 psi, respectively. The detailed finite element analysis was performed to predict flow line in-place behavior. The strain-based criterion of API RP 1111 was used where stresses were greater than allowable limits of the ASME B31.8 and found to be satisfactory. The fatigue analysis of the spans pipe subjected to Vortex Induced Vibration (VIV) showed the need for VIV mitigation measures. It was decided that the entire length of the flow lines crossing the mega-furrows should be stake. The analysis of the stake fatigue life of the flow lines resulted greater than the required 25 years service life. Further analysis was performed on the PIP system to optimize the centralizer spacing to sufficiently limit the buckling of inner pipe under operation conditions and prevent crushing of the insulation in the annulus. J-lay analysis of the installation determining the amount of the inner pipe pre-tensioning that was required to eliminate locked-in stresses in the inner and outer pipes. (author)

  15. The design of light pipe with microstructures for touch screen

    Science.gov (United States)

    Yang, Bo; Lu, Kan; Liu, Pengfei; Wei, Xiaona

    2010-11-01

    Touch screen has a very wide range of applications. Most of them are used in public information inquiries, for instance, service inquiries in telecommunication bureau, tax bureau, bank system, electric department, etc...Touch screen can also be used for entertainment and virtual reality applications too. Traditionally, touch screen was composed of pairs of infrared LED and correspondent receivers which were all installed in the screen frame. Arrays of LED were set in the adjacent sides of the frame of an infrared touch screen while arrays of the infrared receivers were fixed in each opposite side, so that the infrared detecting network was formed. While the infrared touch screen has some technical limitations nowadays such as the low resolution, limitations of touching methods and fault response due to environmental disturbances. The plastic material has a relatively high absorption rate for infrared light, which greatly limits the size of the touch screen. Our design uses laser diode as source and change the traditional inner structure of touch screen by using a light pipe with microstructures. The geometric parameters of the light pipe and the microstructures were obtained through equation solving. Simulation results prove that the design method for touch screen proposed in this paper could achieve high resolution and large size of touch screen.

  16. Design of macro-synthetic fibre reinforced concrete pipes

    OpenAIRE

    Fuente, Albert de la; Escariz, Renata Campos; Figueiredo,Antonio Domingues de; Aguado, Antonio

    2013-01-01

    This paper presents an experimental campaign in which concrete pipes were manufactured using plastic fibres as the sole reinforcement material. In this regard, it has been demonstrated that the use of plastic fibres is compatible with pipe production systems, and that, when subjected to the crushing test (CT), plastic fibre reinforced pipes yield strength classes that are attractive in terms of the growth of this material in the concrete pipe industry. Moreover, the results obtained from b...

  17. Ship Pipe Routing Design Using NSGA-II and Coevolutionary Algorithm

    Directory of Open Access Journals (Sweden)

    Wentie Niu

    2016-01-01

    Full Text Available Pipe route design plays a prominent role in ship design. Due to the complex configuration in layout space with numerous pipelines, diverse design constraints, and obstacles, it is a complicated and time-consuming process to obtain the optimal route of ship pipes. In this article, an optimized design method for branch pipe routing is proposed to improve design efficiency and to reduce human errors. By simplifying equipment and ship hull models and dividing workspace into three-dimensional grid cells, the mathematic model of layout space is constructed. Based on the proposed concept of pipe grading method, the optimization model of pipe routing is established. Then an optimization procedure is presented to deal with pipe route planning problem by combining maze algorithm (MA, nondominated sorting genetic algorithm II (NSGA-II, and cooperative coevolutionary nondominated sorting genetic algorithm II (CCNSGA-II. To improve the performance in genetic algorithm procedure, a fixed-length encoding method is presented based on improved maze algorithm and adaptive region strategy. Fuzzy set theory is employed to extract the best compromise pipeline from Pareto optimal solutions. Simulation test of branch pipe and design optimization of a fuel piping system were carried out to illustrate the design optimization procedure in detail and to verify the feasibility and effectiveness of the proposed methodology.

  18. Design of a robot for in-pipe inspection using omnidirectional wheels and active stabilization

    NARCIS (Netherlands)

    Dertien, Edwin; Mozaffari Foumashi, Mohammad; Pulles, Kees; Stramigioli, Stefano

    2014-01-01

    This paper discusses the design of a vehicle for in-pipe inspection using omnidirectional wheels and active stabilizing control. A novel propulsion mechanism is discussed using omnidirectional wheels (or omni-wheels) is presented which allows direct control of the orientation in the pipe. This paper

  19. VALIDATION OF SIMULATION MODELS FOR DIFFERENTLY DESIGNED HEAT-PIPE EVACUATED TUBULAR COLLECTORS

    DEFF Research Database (Denmark)

    Fan, Jianhua; Dragsted, Janne; Furbo, Simon

    2007-01-01

    Differently designed heat-pipe evacuated tubular collectors have been investigated theoretically and experimentally. The theoretical work has included development of two TRNSYS [1] simulation models for heat-pipe evacuated tubular collectors utilizing solar radiation from all directions. One model...

  20. Vacuum Bellows, Vacuum Piping, Cryogenic Break, and Copper Joint Failure Rate Estimates for ITER Design Use

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Cadwallader

    2010-06-01

    The ITER international project design teams are working to produce an engineering design in preparation for construction of the International Thermonuclear Experimental Reactor (ITER) tokamak. During the course of this work, questions have arisen in regard to safety barriers and equipment reliability as important facets of system design. The vacuum system designers have asked several questions about the reliability of vacuum bellows and vacuum piping. The vessel design team has asked about the reliability of electrical breaks and copper-copper joints used in cryogenic piping. Research into operating experiences of similar equipment has been performed to determine representative failure rates for these components. The following chapters give the research results and the findings for vacuum system bellows, power plant stainless steel piping (amended to represent vacuum system piping), cryogenic system electrical insulating breaks, and copper joints.

  1. INVESTIGATIONS ON DESIGN OF HEAT STORAGE PIPE CONNECTIONS FOR SOLAR COMBISYSTEMS

    DEFF Research Database (Denmark)

    Thür, Alexander; Furbo, Simon

    2005-01-01

    This paper describes how different designed pipe connections on a tank for solar combisystems were evaluated based on experimental tests and theoretical investigations with the simulation tool TRNSYS. Measurement results from laboratory measurements were used to calibrate a TRNSYS model...

  2. INVESTIGATIONS ON DESIGN OF HEAT STORAGE PIPE CONNECTIONS FOR SOLAR COMBISYSTEMS

    DEFF Research Database (Denmark)

    Thür, Alexander; Furbo, Simon

    2005-01-01

    This paper describes how different designed pipe connections on a tank for solar combisystems were evaluated based on experimental tests and theoretical investigations with the simulation tool TRNSYS. Measurement results from laboratory measurements were used to calibrate a TRNSYS model...

  3. VALIDATION OF SIMULATION MODELS FOR DIFFERENTLY DESIGNED HEAT-PIPE EVACUATED TUBULAR COLLECTORS

    DEFF Research Database (Denmark)

    Fan, Jianhua; Dragsted, Janne; Furbo, Simon

    2007-01-01

    Differently designed heat-pipe evacuated tubular collectors have been investigated theoretically and experimentally. The theoretical work has included development of two TRNSYS [1] simulation models for heat-pipe evacuated tubular collectors utilizing solar radiation from all directions. One model...... coating on both sides. The input to the models is thus not a simple collector efficiency expression but the actual collector geometry. In this study, the TRNSYS models are validated with measurements for four differently designed heat-pipe evacuated tubular collectors. The collectors are produced...... cases, a good degree of similarity between measured and calculated results is found. With these validated models detailed parameter analyses and collector design optimization are now possible. Key words: Evacuated tubular collector, Heat pipe, Thermal performance, TRNSYS simulation....

  4. Design and Experiment for Exhaust Pipes of Pressure Wave Supercharged Diesel Engine

    Institute of Scientific and Technical Information of China (English)

    JI Chang-wei; ZHAO Yong; MA Hui; HAN Ai-min; LI Chao

    2007-01-01

    NOx and soot emissions from diesel engines can be greatly reduced by pressure wave supercharging (PWS). The diesel engine matched with PWS needs redesigning its exhaust pipes. Except for meeting the installation requirements, the exhaust gas must be stable in pressure before rushing into PWS. In this paper the lateral and center ported divergent exhaust pipes are designed, modeled geometrically and analyzed structurally based on a 3-D design software-CATIA to determine the structure of two exhaust pipes having the required inner volume. Then flow analysis for two exhaust pipes is done using a flow analysis software-ANASYS. Moreover, the optimal exhaust pipes are determined comprehensively and cast for engine test. Engine test results show that PWS is superior to turbocharging at low engine speeds and inferior to turbocharging in power and emissions at medium-to-high engine speeds. The performance of PWS engine under high speed operating conditions can be improved by contriving larger surge volume intake and exhaust pipes.

  5. Pipe stress analysis on HCCR-TBS ancillary systems in conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Eo Hwak [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    Highlights: • Pipe stress is performed on Korean HCCR-TBS for the load combinations including seismic events. • The resultant stress meets the requirement of the design code & standard except one position where modification is needed. • The results gives useful information for the design evolution in the next desgin phase. - Abstract: Korean Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) will be tested in ITER to demonstrate feasibility of the breeding blanket concept. The HCCR-TBS comprises Test Blanket Module (TBM) with associated shield, and ancillary systems located in various positions of ITER building. Currently, conceptual design for the HCCR-TBS is in progress. This paper presents pipe stress analysis results for the HCCR-TBS ancillary systems. The pipe stress analysis was performed in accordance with ASME B31.3 for major pipes of the Helium Cooling System (HCS) and the Coolant Purification System (CPS), which are operated in high pressure and temperature. The pipe stress for various load cases and load combinations were calculated. Operational pressure and temperature during plasma operation are applied as pressure load and thermal load, respectively. In addition seismic events were combined to investigate the code compliance for sustained load case and occasional load case. It was confirmed that the resultant stress meets the requirements of ASME B31.3 except one position in which it needs modification. These results give useful information for the next design phase, for example, nozzle loads for the component selection, the support design parameters, etc.

  6. At-sea test system point design for a one-third scale cold water pipe

    Energy Technology Data Exchange (ETDEWEB)

    Sutherland, W.H. (ed.)

    1979-12-01

    One step in the development of the technology for Ocean Thermal Energy Conversion (OTEC) Cold Water Pipes (CWP) is the at-sea testing of a fiberglass reinforced plastic nominal 10-foot diameter pipe. A design procedure and criteria for developing test hardware by scaling down a 30-foot diameter OTEC 10/40 MW Pilot Plant CWP design are presented. An example point design for the pipe, instrumentation to be used during the at-sea tests, and methods for selecting the support platform and mooring are described. The design considered starts with a scale model of a larger prototype, and then is modified to address the problems of fabrication and of survivability and handling during the 1/3rd scale model tests.

  7. 49 CFR 192.112 - Additional design requirements for steel pipe using alternative maximum allowable operating...

    Science.gov (United States)

    2010-10-01

    ...) of this section, additional design features, such as mechanical or composite crack arrestors and/or... surface of the plate/coil or pipe to identify imperfections that impair serviceability such as laminations... must be a hardness test, using Vickers (Hv10) hardness test method or equivalent test method, to...

  8. Optimal pipe size design for looped irrigation water supply system using harmony search: Saemangeum project area.

    Science.gov (United States)

    Yoo, Do Guen; Lee, Ho Min; Sadollah, Ali; Kim, Joong Hoon

    2015-01-01

    Water supply systems are mainly classified into branched and looped network systems. The main difference between these two systems is that, in a branched network system, the flow within each pipe is a known value, whereas in a looped network system, the flow in each pipe is considered an unknown value. Therefore, an analysis of a looped network system is a more complex task. This study aims to develop a technique for estimating the optimal pipe diameter for a looped agricultural irrigation water supply system using a harmony search algorithm, which is an optimization technique. This study mainly serves two purposes. The first is to develop an algorithm and a program for estimating a cost-effective pipe diameter for agricultural irrigation water supply systems using optimization techniques. The second is to validate the developed program by applying the proposed optimized cost-effective pipe diameter to an actual study region (Saemangeum project area, zone 6). The results suggest that the optimal design program, which applies an optimization theory and enhances user convenience, can be effectively applied for the real systems of a looped agricultural irrigation water supply.

  9. Optimal Pipe Size Design for Looped Irrigation Water Supply System Using Harmony Search: Saemangeum Project Area

    Directory of Open Access Journals (Sweden)

    Do Guen Yoo

    2015-01-01

    Full Text Available Water supply systems are mainly classified into branched and looped network systems. The main difference between these two systems is that, in a branched network system, the flow within each pipe is a known value, whereas in a looped network system, the flow in each pipe is considered an unknown value. Therefore, an analysis of a looped network system is a more complex task. This study aims to develop a technique for estimating the optimal pipe diameter for a looped agricultural irrigation water supply system using a harmony search algorithm, which is an optimization technique. This study mainly serves two purposes. The first is to develop an algorithm and a program for estimating a cost-effective pipe diameter for agricultural irrigation water supply systems using optimization techniques. The second is to validate the developed program by applying the proposed optimized cost-effective pipe diameter to an actual study region (Saemangeum project area, zone 6. The results suggest that the optimal design program, which applies an optimization theory and enhances user convenience, can be effectively applied for the real systems of a looped agricultural irrigation water supply.

  10. Design, fabrication and test of liquid metal heat-pipe sandwich panels

    Science.gov (United States)

    Basiulis, A.; Camarda, C. J.

    1983-01-01

    Integral heat-pipe sandwich panels, which synergistically combine the thermal efficiency of heat pipes and the structural efficiency of honeycomb sandwich panel construction, were fabricated and tested. The designs utilize two different wickable honeycomb cores, facesheets with screen mesh sintered to the internal surfaces, and potassium or sodium as the working fluid. Panels were tested by radiant heating, and the results indicate successful heat pipe operation at temperatures of approximately 922K (1200F). These panels, in addition to solving potential thermal stress problems in an Airframe-Integrated Scramjet Engine, have potential applications as cold plates for electronic component cooling, as radiators for space platforms, and as low distortion, large area structures.

  11. Seismic design of equipment and piping systems for nuclear power plants in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Minematsu, Akiyoshi [Tokyo Electric Power Co., Inc. (Japan)

    1997-03-01

    The philosophy of seismic design for nuclear power plant facilities in Japan is based on `Examination Guide for Seismic Design of Nuclear Power Reactor Facilities: Nuclear Power Safety Committee, July 20, 1981` (referred to as `Examination Guide` hereinafter) and the present design criteria have been established based on the survey of governmental improvement and standardization program. The detailed design implementation procedure is further described in `Technical Guidelines for Aseismic Design of Nuclear Power Plants, JEAG4601-1987: Japan Electric Association`. This report describes the principles and design procedure of the seismic design of equipment/piping systems for nuclear power plant in Japan. (J.P.N.)

  12. Vapor-modulated heat pipe report. Flight data analysis and further development of variable-conductance heat pipes. [design analysis and performance tests

    Science.gov (United States)

    Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

    1975-01-01

    The design and testing of a heat pipe for spacecraft application is presented. The application in mind calls for heat loads up to 20 watts, a set-point temperature of 294K, and a sink that varies from -220K to nearly as high as the set-point. The overall heat pipe length is 137 cm. Two basically different mechanisms of achieving variable conductance in the pipe by vapor-flow throttling were studied. In one, the thermal resistance between the heat source and sink is due to a saturation-temperature drop corresponding to the vapor-pressure drop developed across the valve. In the other, the pressure difference across the valve induces capillary groove and wick dry out in an evaporation region, and thus results in an increased thermal resistance. This mechanism was selected for fabrication and testing. The pipe is a stainless-steel/methanol two-heat-pipe system. Results are presented and discussed. Engineering drawings and specifications of the pipe are shown.

  13. Piping Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell provide architectural and engineering services in planning, design and construction of a wide range of projects all over the world. In design analysis, company regularly uses COSMIC computer programs. In computer testing piping design of a power plant, company uses Pipe Flexibility Analysis Program (MEL-21) to analyze stresses due to weight, temperature, and pressure found in proposed piping systems. Individual flow rates are put into the computer, then computer calculates the pressure drop existing across each component; if needed, design corrections or adjustments can be made and rechecked.

  14. Ocean thermal energy conversion cold water pipe preliminary design project. Appendices to final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-20

    NOAA/DOE has selected three concepts for a baseline design of the cold water pipe (CWP) for OTEC plants: (1) a FRP CWP of sandwich wall construction suspended from the Applied Physical Laboratory/John Hopkins University (APL/JHU) barge at a site 200 miles east of the coast of Brazil using a horizontal deployment scheme; (2) an elastomer CWP suspended from the APL/JHU barge off the southeast coast of Puerto Rico using either a horizontal or vertical deployment scheme; and (3) a polyethylene CWP (single or multiple pipe) suspended from the Gibbs and Cox spar at the Puerto Rico site using a horizontal deployment scheme. TRW has developed a baseline design for each of these configurations. This volume of the report includes the following appendices: (A) fiberglass reinforced plastic cold water pipe (specification and drawingss); (B) specification for polyethylene CWP; (C) elastomer pipe drawings; (D) drawings for OTEC 10/40 hull/CWP transitions; (E) structural design of OTEC 10/40 CWP support and CWP transitions; (F) universal transition joint for CWP; (G) dynamic spherical seal of CWP; (H) at-sea deployment loads - surface towing loads; (I) OTEC 10/40 CWP deployment up-ending loads; (J) cost estimates for OTEC 10/40 hull/CWP transitions; and (K) OTEC 10/40 CWP deployment scenario and cost estimate. (WHK)

  15. Design Evaluation of a Piping System in the SELFA Sodium Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Son, Seok-Kwon; Jo, Young-Chul; Lee, Hyeong-Yeon; Jeong, Ji-Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    In this study, design evaluations on the SELFA piping system has been conducted according to the ASME B31.1 and RCC-MRx RD-3600. The conservatism of the two codes was quantified based on the evaluation results. It was shown that B31.1 was more conservative for the sustained loads while less conservative for thermal expansion loads when compare with those of RD-3600. However, all the evaluation results according to the two codes were within the code allowables. There are two main piping systems in the SELFA test loop. In this study, the integrity of the SELFA piping system has been evaluated according to the two design-by-rule (DBR) codes of ASME B31.1 and RCC-MRx RD-3600. B31.1 is an industry design code for power piping while RD-3600 is a class 3 nuclear DBR code. The conservatism of the two codes was quantified based on the evaluation results as per the two DBR codes. The sodium test facility of the SELFA is under construction at KAERI for the investigation of thermo-hydraulic behavior of finned-tube sodium-to-air heat exchanger.

  16. Relationships of loudness, level, and time structure in pipe organ registrations and design

    Science.gov (United States)

    Bray, Wade

    2004-05-01

    Time-dependent loudnesses and sound pressure levels were measured binaurally from a variety of individual stops and multi-stop registrations of several classical and theater pipe organs covering a wide range of sizes, tonal designs, pipe scalings, wind pressures, and spatial relationships. Studies were also made of modulation in individual low-frequency notes, and in notes and chords affected by the presence or absence of tremulants. Timbres of certain solo stops were assessed in terms of the relationship of specific loudness and sound pressure spectra to their importance in creating subjective timbre. In addition to loudness and sound pressure measurement, advanced analysis by a hearing model (Sottek) and a temporal/tonal pattern-measurement algorithm (``relative approach'') were employed. Significant differences in the relationship of loudness and level were found depending principally on tonal design, pipe scaling and wind pressures on one hand, and octave-related tonal centers and timbral characteristics of individual stops on the other hand. Consideration was also given to the subjective spatial soundscape resulting from different pipe organ physical layouts and from simultaneous registrations between or among physically-separated speaking divisions.

  17. Ocean thermal energy conversion cold water pipe preliminary design project. Appendices to Task 2. Analysis for concept selection

    Energy Technology Data Exchange (ETDEWEB)

    1979-04-01

    Appendices include (A) TRW CWP/hull dynamics computer model (HULPIPE); (B) environmental data; (C) structural analysis methods; (D) work breakdown structure; (E) costing worksheets; (F) thermal design of the cold water pipe; (G) CWP/Platform transition ROM costs; (H) installation scenarios and costs; (I) cost uncertainty assessment; (J) risk assessment; and (K) OTEC cold water pipe concept catalog. (WHK)

  18. Method for optimal design of pipes for low-energy district heating, with focus on heat losses

    DEFF Research Database (Denmark)

    Dalla Rosa, Alessandro; Li, Hongwei; Svendsen, Svend

    2011-01-01

    The synergy between highly energy-efficient buildings and low-energy district heating (DH) systems is a promising concept for the optimal integration of energy-saving policies and energy supply systems based on renewable energy (RE). Network transmission and distribution heat loss is one of the key...... factors in the optimal design of low-energy DH systems. Various pipe configurations are considered in this paper: flexible pre-insulated twin pipes with symmetrical or asymmetrical insulation, double pipes, and triple pipes. These technologies represent potential energy-efficient and cost...... showed the influence of the soil temperature throughout the year. Finally, the article describes proposals for the optimal design of pipes for low-energy applications and presents methods for decreasing heat losses....

  19. Some considerations for establishing seismic design criteria for nuclear plant piping

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W.P. [Energy Technology Engineering Center, Canoga Park, CA (United States); Chokshi, N.C. [Nuclear Regulatory Commission, Washington, DC (United States)

    1997-01-01

    The Energy Technology Engineering Center (ETEC) is providing assistance to the U.S. NRC in developing regulatory positions on the seismic analysis of piping. As part of this effort, ETEC previously performed reviews of the ASME Code, Section III piping seismic design criteria as revised by the 1994 Addenda. These revised criteria were based on evaluations by the ASME Special Task Group on Integrated Piping Criteria (STGIPC) and the Technical Core Group (TCG) of the Advanced Reactor Corporation (ARC) of the earlier joint Electric Power Research Institute (EPRI)/NRC Piping & Fitting Dynamic Reliability (PFDR) program. Previous ETEC evaluations reported at the 23rd WRSM of seismic margins associated with the revised criteria are reviewed. These evaluations had concluded, in part, that although margins for the timed PFDR tests appeared acceptable (>2), margins in detuned tests could be unacceptable (<1). This conclusion was based primarily on margin reduction factors (MRFs) developed by the ASME STGIPC and ARC/TCG from realistic analyses of PFDR test 36. This paper reports more recent results including: (1) an approach developed for establishing appropriate seismic margins based on PRA considerations, (2) independent assessments of frequency effects on margins, (3) the development of margins based on failure mode considerations, and (4) the implications of Code Section III rules for Section XI.

  20. Design and Inspection of Liquid Cargo Piping of Chemical Tanker

    Institute of Scientific and Technical Information of China (English)

    Ying Sheng; Jiang Chengsong

    2012-01-01

    There is a great variety of liquid chemicals, and many shipowners are not clear about the cargos their ships will carry at the early stage of the design and construction of chemical tankers. In addition, because of the inclination to choose low cost construction material due to cost concern, the sources of cargos that ships can carry are greatly limited and the operation efficiency will be influenced. What should we do to avoid such situations?

  1. Thermal design heat sinks, thermoelectrics, heat pipes, compact heat exchangers, and solar cells

    CERN Document Server

    Lee, H S

    2010-01-01

    The proposed is written as a senior undergraduate or the first-year graduate textbook,covering modern thermal devices such as heat sinks, thermoelectric generators and coolers, heat pipes, and heat exchangers as design components in larger systems. These devices are becoming increasingly important and fundamental in thermal design across such diverse areas as microelectronic cooling, green or thermal energy conversion, and thermal control and management in space, etc. However, there is no textbook available covering this range of topics. The proposed book may be used as a capstone design cours

  2. Thermal design of spiral heat exchangers and heat pipes through global best algorithm

    Science.gov (United States)

    Turgut, Oğuz Emrah; Çoban, Mustafa Turhan

    2017-03-01

    This study deals with global best algorithm based thermal design of spiral heat exchangers and heat pipes. Spiral heat exchangers are devices which are highly efficient in extremely dirty and fouling process duties. Spirals inherent in design maintain high heat transfer coefficients while avoiding hazardous effects of fouling and uneven fluid distribution in the channels. Heat pipes have wide usage in industry. Thanks to the two phase cycle which takes part in operation, they can transfer high amount of heat with a negligible temperature gradient. In this work, a new stochastic based optimization method global best algorithm is applied for multi objective optimization of spiral heat exchangers as well as single objective optimization for heat pipes. Global best algorithm is easy-to-implement, free of derivatives and it can be reliably applied to any optimization problem. Case studies taken from the literature approaches are solved by the proposed algorithm and results obtained from the literature approaches are compared with thosed acquired by GBA. Comparisons reveal that GBA attains better results than literature studies in terms of solution accuracy and efficiency.

  3. Design of Heat Pipe Type Adsorption Ice Maker for Fishing Boats

    Institute of Scientific and Technical Information of China (English)

    王丽伟; 王如竹; 夏再忠; 吴静怡

    2005-01-01

    A heat pipe type adsorption ice maker with two adsorbers for fishing boats is designed by using ammonia as refrigerant and compound of activated carbon-GaG12 as adsorbent. This type of heat pipe adsorber can solve the problem of incompatibility between ammonia, copper, seawater and steel. The working process of the ice maker with 8.7kg adsorbent per bed is simulated. The results show that the optimal semi-cycle time is about 9min at the evaporating temperature of -15℃, where the corresponding cooling power, specific cooling power per kilogram adsorbent SCP and coefficient of refrigerant performance COP are respectively 3.6 kW, 217 W·kg-1 and 0.404.

  4. Design, development and test of a capillary pump loop heat pipe

    Science.gov (United States)

    Kroliczek, E. J.; Ku, J.; Ollendorf, S.

    1984-01-01

    The development of a capillary pump loop (CPL) heat pipe, including computer modeling and breadboard testing, is presented. The computer model is a SINDA-type thermal analyzer, combined with a pressure analyzer, which predicts the transients of the CPL heat pipe during operation. The breadboard is an aluminum/ammonia transport system which contains multiple parallel evaporator and condenser zones within a single loop. Test results have demonstrated the practicality and reliability of such a design, including heat load sharing among evaporators, liquid inventory/temperature control feature, and priming under load. Transport capability for this system is 65 KW-M with individual evaporator pumps managing up to 1.7 KW at a heat flux of 15 W/sq cm. The prediction of the computer model for heat transport capabilities is in good agreement with experimental results.

  5. Design and Operation of a Cryogenic Nitrogen Pulsating Heat Pipe

    Science.gov (United States)

    Diego Fonseca, Luis; Miller, Franklin; Pfotenhauer, John

    2015-12-01

    We report the design, experimental setup and successful test results using an innovative passive cooling system called a “Pulsating Heat Pipe” (PHP) operating at temperatures ranging from 77 K to 80 K and using nitrogen as the working fluid. PHPs, which transfer heat by two phase flow mechanisms through a closed loop tubing have the advantage that no electrical pumps are needed to drive the fluid flow. In addition, PHPs have an advantage over copper straps and thermal conductors since they are lighter in weight, exhibit lower temperature gradients and have higher heat transfer rates. PHPs consist of an evaporator section, thermally anchored to a solid, where heat is received at the saturation temperature where the liquid portion of the two-phase flow evaporates, and a condenser where heat is rejected at the saturation temperature where the vapor is condensed. The condenser section in our experiment has been thermally interfaced to a CT cryocooler from SunPower that has a cooling capacity of 10 W at 77 K. Alternating regions of liquid slugs and small vapor plugs fill the capillary tubing, with the vapor regions contracting in the condenser section and expanding in the evaporator section due to an electric heater that will generate heat loads up to 10 W. This volumetric expansion and contraction provides the oscillatory flow of the fluid throughout the capillary tubing thereby transferring heat from one end to the other. The thermal performance and temperature characteristics of the PHP will be correlated as a function of average condenser temperature, PHP fill liquid ratio, and evaporator heat load. The experimental data show that the heat transfer between the evaporator and condenser sections can produce an effective thermal conductivity up to 35000 W/m-K at a 3.5 W heat load.

  6. Piping Flexibility

    Science.gov (United States)

    1978-01-01

    A NASA computer program aids Hudson Engineering Corporation, Houston, Texas, in the design and construction of huge petrochemical processing plants like the one shown, which is located at Ju'aymah, Saudi Arabia. The pipes handling the flow of chemicals are subject to a variety of stresses, such as weight and variations in pressure and temperature. Hudson Engineering uses a COSMIC piping flexibility analysis computer program to analyze stresses and unsure the necessary strength and flexibility of the pipes. This program helps the company realize substantial savings in reduced engineering time.

  7. Review of application code and standards for mechanical and piping design of HANARO fuel test loop

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.

    1998-02-01

    The design and installation of the irradiation test facility for verification test of the fuel performance are very important in connection with maximization of the utilization of HANARO. HANARO fuel test loop was designed in accordance with the same code and standards of nuclear power plant because HANARO FTL will be operated the high pressure and temperature same as nuclear power plant operation conditions. The objective of this study is to confirm the propriety of application code and standards for mechanical and piping of HANARO fuel test loop and to decide the technical specification of FTL systems. (author). 18 refs., 8 tabs., 6 figs.

  8. Ocean thermal energy conversion cold water pipe preliminary design project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-20

    As part of a DOE goal to develop one or more OTEC Modular Experiment Plants, TRW performed designs, analyses, and evaluations of cold water pipe (CWP) concepts for NOAA. After reviewing the results of the CWP concept selection phase NOAA/DOE selected three concepts for a baseline design: (1) a FRP CWP of sandwich wall construction suspended from the Applied Physics Laboratory/John Hopkins University (APL/JHU) barge at a site 200 miles east of the coast of Brazil using a horizontal deployment scheme (this is TRW's preferred approach); (2) an elastomer CWP suspended from the APL/JHU barge off the southeast coast of Puerto Rico using either a horizontal or vertical deployment scheme; and (3) a polyethylene CWP (single or multiple pipe) suspended from the Gibbs and Cox spar at the Puerto Rico site using a horizontal deployment scheme. TRW has developed a baseline design for each of these configurations. Detailed designs and analyses for the FRP, polyethylene, and elastomer concepts, respectively, are described. A discussion of fabrication plans and processes, schedules for mobilization of facilities and equipment, installation plans, and cost breakdown are given for each concept. (WHK)

  9. A thermoelectric generator using loop heat pipe and design match for maximum-power generation

    KAUST Repository

    Huang, Bin-Juine

    2015-09-05

    The present study focuses on the thermoelectric generator (TEG) using loop heat pipe (LHP) and design match for maximum-power generation. The TEG uses loop heat pipe, a passive cooling device, to dissipate heat without consuming power and free of noise. The experiments for a TEG with 4W rated power show that the LHP performs very well with overall thermal resistance 0.35 K W-1, from the cold side of TEG module to the ambient. The LHP is able to dissipate heat up to 110W and is maintenance free. The TEG design match for maximum-power generation, called “near maximum-power point operation (nMPPO)”, is studied to eliminate the MPPT (maximum-power point tracking controller). nMPPO is simply a system design which properly matches the output voltage of TEG with the battery. It is experimentally shown that TEG using design match for maximum-power generation (nMPPO) performs better than TEG with MPPT.

  10. 46 CFR 154.503 - Piping and piping system components: Protection from movement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping and piping system components: Protection from..., Construction and Equipment Cargo and Process Piping Systems § 154.503 Piping and piping system components... cause stresses that exceed the design stresses, the piping and piping system components and cargo...

  11. Research Activities on Development of Piping Design Methodology of High Temperature Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Nam-Su [Seoul National Univ. of Science and Technology, Seoul(Korea, Republic of); Won, Min-Gu [Sungkyukwan Univ., Suwon (Korea, Republic of); Oh, Young-Jin [KEPCO Engineering and Construction Co. Inc., Gimcheon (Korea, Republic of); Lee, Hyeog-Yeon; Kim, Yoo-Gon [Korea Atomic Energy Research Institute, Daejeon(Korea, Republic of)

    2016-10-15

    A SFR is operated at high temperature and low pressure compared with commercial pressurized water reactor (PWR), and such an operating condition leads to time-dependent damages such as creep rupture, excessive creep deformation, creep-fatigue interaction and creep crack growth. Thus, high temperature design and structural integrity assessment methodology should be developed considering such failure mechanisms. In terms of design of mechanical components of SFR, ASME B and PV Code, Sec. III, Div. 5 and RCC-MRx provide high temperature design and assessment procedures for nuclear structural components operated at high temperature, and a Leak-Before-Break (LBB) assessment procedure for high temperature piping is also provided in RCC-MRx, A16. Three web-based evaluation programs based on the current high temperature codes were developed for structural components of high temperature reactors. Moreover, for the detailed LBB analyses of high temperature piping, new engineering methods for predicting creep C*-integral and creep COD rate based either on GE/EPRI or on reference stress concepts were proposed. Finally, the numerical methods based on Garofalo's model and RCC-MRx have been developed, and they have been implemented into ABAQUS. The predictions based on both models were compared with the experimental results, and it has been revealed that the predictions from Garafalo's model gave somewhat successful results to describe the deformation behavior of Gr. 91 at elevated temperatures.

  12. Design Of A Laboratory Set-up For Evaluating Structural Strength Of Deteriorated Concrete Sewer Pipes

    NARCIS (Netherlands)

    Stanic, N.; Salet, T.; Langeveld, J.G.; Clemens, F.H.L.R.

    2014-01-01

    The principle of structural behaviour of buried concrete pipes is fairly understood, except for how material deterioration affects structural behaviour and performance. Consequently, information on the structural behaviour of deteriorated sewer pipes will contribute to better understanding of the ch

  13. Design, fabrication and test of a hydrogen heat pipe. [extruding and grooving 6063-T6 aluminum tubes for cryogenic heat pipes

    Science.gov (United States)

    Alario, J.

    1979-01-01

    Re-entrant groove technology was extended to hydrogen heat pipes. Parametric analyses are presented which optimize the theoretical design while considering the limitations of state-of-the-art extrusion technology. The 6063-T6 aluminum extrusion is 14.6 mm OD with a wall thickness of 1.66 mm and contains 20 axial grooves which surround a central 9.3 mm diameter vapor core. Each axial groove is 0.775 mm diameter with a 0.33 mm opening. An excess vapor reservoir is provided at the evaporator to minimize the pressure containment hazard during ambient storage. Modifications to the basic re-entrant groove profile resulted in improved overall performance. While the maximum heat transport capacity decreased slightly to 103 w-m the static wicking height increased markedly to 4.5 cm. The heat pipe became operational between 20 and 30 K after a cooldown from 77 K without any difficulty. Steady state performance data taken over a 19 to 23 K temperature range indicated: (1) maximum heat transport capacity of 5.4 w-m; (2) static wicking height of 1.42 cm; and (3) overall heat pipe conductance of 1.7 watts/deg C.

  14. INVESTIGATIONS ON DESIGN OF HEAT STORAGE PIPE CONNECTIONS FOR SOLAR COMBISYSTEMS

    DEFF Research Database (Denmark)

    Thür, Alexander; Furbo, Simon

    2005-01-01

    for simulations with parameter analysis. The possibility to connect pipes at the bottom and use internal PEX pipes to reach the inlet/outlet level in the tank was compared with the possibility to connect the pipe at the side of the tank and pass to the bottom level of the tank inside the tank insulation...

  15. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  16. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  17. Design of touch screen and irregular pipe saw pipe bender controlled by PLC%触摸屏与PLC控制的异型管锯管机的设计

    Institute of Scientific and Technical Information of China (English)

    蒋玲; 张超

    2012-01-01

    介绍了异型管锯管机的设计,通过异型管锯管机的结构与工作原理分析,设计了气动系统和以FX1N-40 MT为控制器、proface触摸屏为人机界面的PLC控制系统.该设备工作性能稳定、操作方便、经济适用,能够较好地完成异型管的切割.%This article describes the design process of the irregular pipe saw pipe bender. Through analysis of the irregular pipe saw pipe bender structure and working principle, pneumatic system and PLC control system with FX1N-40 MT for controller, proface touch screen for human-computer interface are designed, the equipment is stable performance, convenient operation, economy applicable, to better finish irregular pipe cutting.

  18. Pipe Drafting with CAD. Teacher Edition.

    Science.gov (United States)

    Smithson, Buddy

    This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

  19. The design of a multimegawatt heat pipe radiator for an inertial fusion rocket powered manned Mars mission

    Science.gov (United States)

    Murray, K. A.

    1988-01-01

    A system of heat pipe radiators has been designed to provide waste heat rejection for an inertial fusion powered spacecraft capable of manned missions to other planets. The radiators are arrays of unfinned, arterial heat pipes operating at 1500 and 900 K. Liquid metal coolant carries up to 8000 MW of waste heat through feed pipes from on-board components (laser drivers and coil shield). The radiators do not rely on armor for protection from micrometeoroid penetration. An armored radiator design for this application with a 99 percent survivability would have a specific mass of 0.06 to 0.11 kg/kW at 1500 K. Instead, a segmentation of heat pipes is used, and bumpers are utilized to protect the feed pipes. This design reduces the specific mass to 0.015 to 0.04 kg/kW for the coil shield radiator (1500 K) and 0.06 to 0.12 kg/kW for the laser driver radiator (900 K).

  20. Design and development of a shape memory alloy activated heat pipe-based thermal switch

    Science.gov (United States)

    Benafan, O.; Notardonato, W. U.; Meneghelli, B. J.; Vaidyanathan, R.

    2013-10-01

    This work reports on the design, fabrication and testing of a thermal switch wherein the open and closed states were actuated by shape memory alloy (SMA) elements while heat was transferred by a two-phase heat pipe. The motivation for such a switch comes from NASA’s need for thermal management in advanced spaceport applications associated with future lunar and Mars missions. As the temperature can approximately vary between -233 and 127 ° C during lunar day/night cycles, the switch was designed to reject heat from a cryogen tank into space during the night cycle while providing thermal isolation during the day cycle. A Ni47.1Ti49.6Fe3.3 (at.%) alloy that exhibited a reversible phase transformation between a trigonal R-phase and a cubic austenite phase was used as the sensing and actuating elements. Thermomechanical actuation, accomplished through an antagonistic spring system, resulted in strokes up to 7 mm against bias forces of up to 45 N. The actuation system was tested for more than thirty cycles, equivalent to one year of operation. The thermal performance, accomplished via a variable length, closed two-phase heat pipe, was evaluated, resulting in heat transfer rates of 13 W using pentane and 10 W using R-134a as working fluids. Experimental data were also compared to theoretical predictions where possible. Direct comparisons between different design approaches of SMA helical actuators, highlighting the effects of the helix angle, were carried out to give a layout of more accurate design methodologies.

  1. New design solutions for low-power energy production in water pipe systems

    Directory of Open Access Journals (Sweden)

    Helena M. RAMOS

    2009-12-01

    Full Text Available This study is the result of ongoing research for a European Union 7th Framework Program Project regarding energy converters for very low heads, and aims to analyze optimization of new cost-effective hydraulic turbine designs for possible implementation in water supply systems (WSSs or in other pressurized water pipe infrastructures, such as irrigation, wastewater, or drainage systems. A new methodology is presented based on a theoretical, technical and economic analysis. Viability studies focused on small power values for different pipe systems were investigated. Detailed analyses of alternative typical volumetric energy converters were conducted on the basis of mathematical and physical fundamentals as well as computational fluid dynamics (CFD associated with the interaction between the flow conditions and the system operation. Important constraints (e.g., size, stability, efficiency, and continuous steady flow conditions can be identified and a search for alternative rotary volumetric converters is being conducted. As promising cost-effective solutions for the coming years, adapted rotor-dynamic turbomachines and non-conventional axial propeller devices were analyzed based on the basic principles of pumps operating as turbines, as well as through an extensive comparison between simulations and experimental tests.

  2. Ocean thermal energy conversion cold water pipe preliminary design project. Task 2. Analysis for concept selection

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-04-01

    The successful performance of the CWP is of crucial importance to the overall OTEC system; the pipe itself is considered the most critical part of the entire operation. Because of the importance the CWP, a project for the analysis and design of CWP's was begun in the fall of 1978. The goals of this project were to study a variety of concepts for delivering cold water to an OTEC plant, to analyze and rank these concepts based on their relative cost and risk, and to develop preliminary design for those concepts which seemed most promising. Two representative platforms and sites were chosen: a spar buoy of a Gibbs and Cox design to be moored at a site off Punta Tuna, Puerto Rico, and a barge designed by APL/Johns Hopkins University, grazing about a site approximately 200 miles east of the coast of Brazil. The approach was to concentrate on the most promising concepts and on those which were either of general interest or espoused by others (e.g., steel and concrete concepts). Much of the overall attention, therefore, focused on analyzing rigid and compliant wall design, while stockade (except for the special case of the FRP stockade) and bottom-mounted concepts received less attention. A total of 67 CWP concepts were initially generated and subjected to a screening process. Of these, 16 were carried through design analysis, costing, and ranking. Study results are presented in detail. (WHK)

  3. Piping Connector

    Science.gov (United States)

    1994-01-01

    In Stennis Space Center's Component Test Facility, piping lines carry rocket propellants and high pressure cryogenic fuels. When the lines are chilled to a pretest temperature of 400 degrees below zero, ordinary piping connectors can leak. Under contract to Stennis, Reflange, Inc. developed the T-Con connector, which included a secondary seal that tolerates severe temperature change. Because of the limited need for the large and expensive T-Con product, Reflange also developed the less costly E-Con, a smaller more compact design with the same technical advantages as the T-Con.

  4. Computer program grade 2 for the design and analysis of heat-pipe wicks

    Science.gov (United States)

    Eninger, J. E.; Edwards, D. K.

    1976-01-01

    This user's manual describes the revised version of the computer program GRADE(1), which designs and analyzes heat pipes with graded porosity fibrous slab wicks. The revisions are: (1) automatic calculation of the minimum condenser-end stress that will not result in an excess-liquid puddle or a liquid slug in the vapor space; (2) numerical solution of the equations describing flow in the circumferential grooves to assess the burnout criterion; (3) calculation of the contribution of excess liquid in fillets and puddles to the heat-transport; (4) calculation of the effect of partial saturation on the wick performance; and (5) calculation of the effect of vapor flow, which includes viscousinertial interactions.

  5. Optimum Evaluation of Thermal Performance Characteristics of Micro Heat Pipe using the Hadamard Matrix Design Technique

    Directory of Open Access Journals (Sweden)

    Achebo, J.I

    2013-06-01

    Full Text Available Micro heat pipes are on increasing demand as a result of current advances in technology consequently leading to a concomitant demand for continued research on how their thermal performance could be optimized; hence this study. The Hadamard matrix design approach was used to optimize the input parameters which generated an optimum combination of a 90o inclination angle, 8.70W heat input, and a 0.3 l/min coolant flow rate, these values match with the combination in sample trial 2. Further investigation revealed that sample trial 2 has a thermal resistance of 3.8oC/W with a threshold overall heat transfer coefficient of 750W/m2 oC

  6. Design and construction of an in-pipe robot for inspection and maintenance

    KAUST Repository

    Sibai, Fadi N.

    2012-12-01

    Inspection and maintenance of aging pipelines is crucial to the reliable and continued distribution of hydrocarbons. In this paper, we describe the design and construction of a robotic platform for inspection and minor maintenance of pipelines. The 7.5 kg robotic platform was demonstrated to move straight inside 12″ to 16″ diameter pipes in a forward or backward direction, and either horizontally or vertically. The experimental robotic platform has three sets of two wheels, and three driving motors. The equations governing the mechanical frame\\'s component sizes are presented and the robotic frame component dimensions derived. The paper also discusses the construction and testing of the robot. Future work includes adding sensors, controls for turning, a microcontroller board, and a robotic arm for performing maintenance tasks. © 2012 IEEE.

  7. Design and Application Research for GRP Well Pipe%玻璃钢井管的设计与应用

    Institute of Scientific and Technical Information of China (English)

    田超凯; 徐建英

    2011-01-01

    This paper introduce in detail the design of material selection,joint type,manufacturing process,etc for GR well pipe along with series of advantages and actual project requirement, it is beneficial to application and promotion for well pipe.%本文结合玻璃钢井管的诸多优点及实际项目情况,较为详细地介绍了玻璃钢井管的设计、材料选择、接头方式、制作工艺等,有益于玻璃钢井管的应用推广。

  8. Discussion on direct connection of pipe fittings in pipeline design%管道设计中管件直联问题探讨

    Institute of Scientific and Technical Information of China (English)

    叶仕通

    2016-01-01

    管道设计过程中经常会遇到管件直联。管件直联需要考虑什么因素是值得探讨的问题。%The engineers often encountered pipe fittings connected directly in the piping design process .If we can make the pipe fittings connected directly and what need us to consider,is good questions need us to discuss.

  9. Optimal design of district heating and cooling pipe network of seawater-source heat pump

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiang-li; Duanmu, Lin; Shu, Hai-wen [School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian, Liaoning Province 116024 (China)

    2010-01-15

    The district heating and cooling (DHC) system of a seawater-source heat pump is large system engineering. The investments and the operational cost of DHC pipe network are higher than a tradition system. Traditional design methods only satisfy the needs of the technology but dissatisfy the needs of the economy, which not only waste a mass of money but also bring problems to the operation, the maintenance and the management. So we build a least-annualized-cost global optimal mathematic model that comprises all constrict conditions. Furthermore, this model considers the variety of heating load and cooling load, the operational adjustment in different periods of the year. Genetic algorithm (GA) is used to obtain the optimal combinations of discrete diameters. Some operators of GA are selected to reduce the calculation time and obtain good calculation accuracy. This optimal method is used to the design of the DHC network of Xinghai Bay commercial district which is a real engineering. The design optimization can avoid the matter of the hydraulic unbalance of the system, enhance the running efficiency and greatly reduce the annualized-cost comparing with the traditional design method. (author)

  10. Computational simulations of frictional losses in pipe networks confirmed in experimental apparatusses designed by honors students

    Science.gov (United States)

    Pohlman, Nicholas A.; Hynes, Eric; Kutz, April

    2015-11-01

    Lectures in introductory fluid mechanics at NIU are a combination of students with standard enrollment and students seeking honors credit for an enriching experience. Most honors students dread the additional homework problems or an extra paper assigned by the instructor. During the past three years, honors students of my class have instead collaborated to design wet-lab experiments for their peers to predict variable volume flow rates of open reservoirs driven by gravity. Rather than learn extra, the honors students learn the Bernoulli head-loss equation earlier to design appropriate systems for an experimental wet lab. Prior designs incorporated minor loss features such as sudden contraction or multiple unions and valves. The honors students from Spring 2015 expanded the repertoire of available options by developing large scale set-ups with multiple pipe networks that could be combined together to test the flexibility of the student team's computational programs. The engagement of bridging the theory with practice was appreciated by all of the students such that multiple teams were able to predict performance within 4% accuracy. The challenges, schedules, and cost estimates of incorporating the experimental lab into an introductory fluid mechanics course will be reported.

  11. Application of bounding spectra to seismic design of piping based on the performance of above ground piping in power plants subjected to strong motion earthquakes

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J.D. [Stevenson and Associates, Cleveland, OH (United States)

    1995-02-01

    This report extends the potential application of Bounding Spectra evaluation procedures, developed as part of the A-46 Unresolved Safety Issue applicable to seismic verification of in-situ electrical and mechanical equipment, to in-situ safety related piping in nuclear power plants. The report presents a summary of earthquake experience data which define the behavior of typical U.S. power plant piping subject to strong motion earthquakes. The report defines those piping system caveats which would assure the seismic adequacy of the piping systems which meet those caveats and whose seismic demand are within the bounding spectra input. Based on the observed behavior of piping in strong motion earthquakes, the report describes the capabilities of the piping system to carry seismic loads as a function of the type of connection (i.e. threaded versus welded). This report also discusses in some detail the basic causes and mechanisms for earthquake damages and failures to power plant piping systems.

  12. Computer program grade for design and analysis of graded-porosity heat-pipe wicks

    Science.gov (United States)

    Eninger, J. E.

    1974-01-01

    A computer program for numerical solution of differential equations that describe heat pipes with graded-porosity fibrous wicks is discussed. A mathematical problem is provided with a summary of the input and output steps used to solve it. The program is also applied to the analysis of a typical heat pipe.

  13. A Sensitivity Analysis of a Pipe Break Accident in a Preliminary Specific Design of the PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwi Lim; Jeong, Jae Ho; Ha, Kwi Seok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    The PGSFR (Prototype Gen-IV Sodium-cooled Fast Reactor) is a pool type sodium cooled fast reactor with a thermal power of 392.1 MW which has been developed in accord with an enhanced safety, an efficient utilization of uranium resources and a reduction of a high level waste volume in the Korea Atomic Energy Research Institute (KAERI) since 2012 under a National Nuclear R and D Program. The PGSFR has an inherent safety characteristic owing to the design to have a negative power reactivity coefficient during all operation modes and it has a passive safety characteristic due to the design of a passive decay heat removal circuit. In order to assess the inherent safety features of the PGSFR, a safety analysis was performed for a pipe break accident with MARS-LMR. And, the sensitivity studies were also performed to find the most conservative condition. As a result, the PGSFR was appropriately tripped by a high power to PHTS flow ratio using the method of extracting the PHTS flow rate from the pressure drop. The air flow rate was the most sensitive variable in the sensitivity analysis. Therefore, it is important to know the accurate uncertainty of the air flow rate in the AHX.

  14. Design considerations for a thermophotovoltaic energy converter using heat pipe radiators

    Energy Technology Data Exchange (ETDEWEB)

    Ashcroft, J.; DePoy, D. [Lockheed Martin Corp., Schenectady, NY (United States)

    1997-06-01

    The purpose of this paper is to discuss concepts for using high temperature heat pipes to transport energy from a heat source to a thermophotovoltaic (TPV) converter. Within the converter, the condenser portion of each heat pipe acts as a photon radiator, providing a radiant flux to adjacent TPV cells, which in turn create electricity. Using heat pipes in this way could help to increase the power output and the power density of TPV systems. TPV systems with radiator temperatures in the range of 1,500 K are expected to produce as much as 3.6 W/cm{sup 3} of heat exchanger volume at an efficiency of 20% or greater. Four different arrangements of heat pipe-TPV energy converters are considered. Performance and sizing calculations for each of the concepts are presented. Finally, concerns with this concept and issues which remain to be considered are discussed.

  15. Design and experimental analysis of a screened heat pipe for solar applications

    Science.gov (United States)

    Jafari, D.; Filippeschi, S.; Franco, A.; Di Marco, P.

    2015-11-01

    This paper summarizes the design, the construction and the preliminary results of a transient and steady state investigation of the heat transfer mechanisms of a horizontal heat pipe (HP). The experiments are performed using a custom-made HP constituted by copper tube with outer diameter and length as 35 mm and 510 mm, respectively, with the inner surface covered by three layers stainless steel mesh wick (100 mesh/inch). Water is used as a working fluid. The evaporator section is heated by electrical resistances wrapped around the tube and the cooling system consists of an insulated water manifold with inner diameter of 39 mm, connected to chilled water bath to maintain the inlet temperature of the circulating cooling water at 25 °C for various heat loads (30-100 W). The aims of this activity is to obtain data to verify the steady state HP analytical model already presented by authors at a fixed filling volume and to determine the effect of the heat transfer load on the heat transfer performance of screen mesh HPs. The heat transfer coefficients are determined using thermocouples on the outer wall and within the core of the HP. The agreement between the analytical results and the preliminary experimental data appears to be very good.

  16. Application of formal optimization techniques in thermal/structural design of a heat-pipe-cooled panel for a hypersonic vehicle

    Science.gov (United States)

    Camarda, Charles J.; Riley, Michael F.

    1987-01-01

    Nonlinear mathematical programming methods are used to design a radiantly cooled and heat-pipe-cooled panel for a Mach 6.7 transport. The cooled portion of the panel is a hybrid heat-pipe/actively cooled design which uses heat pipes to transport the absorbed heat to the ends of the panel where it is removed by active cooling. The panels are optimized for minimum mass and to satisfy a set of heat-pipe, structural, geometric, and minimum-gage constraints. Two panel concepts are investigated: cylindrical heat pipes embedded in a honeycomb core and an integrated design which uses a web-core heat-pipe sandwich concept. The latter was lighter and resulted in a design which was less than 10 percent heavier than an all actively cooled concept. The heat-pipe concept, however, is redundant and can sustain a single-point failure, whereas the actively cooled concept cannot. An additional study was performed to determine the optimum number of coolant manifolds per panel for a minimum-mass design.

  17. Design and Testing of Metal and Silicon Heat Spreaders with Embedded Micromachined Heat Pipes

    Energy Technology Data Exchange (ETDEWEB)

    Benson, D.A.; Robino, C.V.

    1999-02-22

    The authors have developed a new type of heat spreader based on the integration of heat pipes directly within a thin planar structure suitable for use as a heat spreader or as the base layer in a substrate. The process uses micromachining methods to produce micron scale patterns that act as a wick in these small scale heat pipes. By using silicon or a low expansion metal as the wall material of these spreaders, they achieve a good match to the thermal coefficient of expansion of the die. The match allows the use of a thin high performance die attachment even on large size die. The embedded heat pipes result in high effective thermal conductivity for the new spreader technology.

  18. Introduction to Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

  19. Applications and Technical Characteristics of Thermal Pipe Subgrade in Qinghai-Tibet Railway Design%青藏铁路设计中热棒路基的应用及其技术指标

    Institute of Scientific and Technical Information of China (English)

    冉里; 薛新功; 包黎明

    2004-01-01

    In accordance with the application of thermal pipe in the Qinghai-Tibet Railway subgrade project and the research data made on the Qingshuihe experimental field, this paper makes an attempt to illustrate the design principles, basis and technical characteristics, puts forward the problems needing further study, and pipe the reason and tendency of the longitudinal crack in the subgrade applied with thermal pipe.

  20. Piping: Over 100 years of experience: From empiricism towards reliability-based design

    NARCIS (Netherlands)

    Van Beek, V.M.; Knoeff, H.G.; Schweckendiek, T.

    2011-01-01

    Backward piping is the process of channel formation in a sandy aquifer under river dikes. During high water periods this process manifests itself by the formation of sand boils. A long history of cases and experiments has contributed to the insights into this phenomenon and has improved the ability

  1. Piping: Over 100 years of experience: From empiricism towards reliability-based design

    NARCIS (Netherlands)

    Van Beek, V.M.; Knoeff, H.G.; Schweckendiek, T.

    2011-01-01

    Backward piping is the process of channel formation in a sandy aquifer under river dikes. During high water periods this process manifests itself by the formation of sand boils. A long history of cases and experiments has contributed to the insights into this phenomenon and has improved the ability

  2. An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design

    Science.gov (United States)

    Rifai, Damhuji; Abdalla, Ahmed N.; Razali, Ramdan; Ali, Kharudin; Faraj, Moneer A.

    2017-01-01

    The use of the eddy current technique (ECT) for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT inspection system (DSECT) use for crack inspection on inner ferromagnetic pipes. The system consists of an array of giant magneto-resistive (GMR) sensors, a pneumatic system, a rotating magnetic field excitation source and a host PC acting as the data analysis center. Probe design parameters, namely probe diameter, an excitation coil and the number of GMR sensors in the array sensor is optimized using numerical optimization based on the desirability approach. The main benefits of DSECT can be seen in terms of its modularity and flexibility for the use of different types of magnetic transducers/sensors, and signals of a different nature with either digital or analog outputs, making it suited for the ECT probe design using an array of GMR magnetic sensors. A real-time application of the DSECT distributed system for ECT inspection can be exploited for the inspection of 70 mm carbon steel pipe. In order to predict the axial and circumference defect detection, a mathematical model is developed based on the technique known as response surface methodology (RSM). The inspection results of a carbon steel pipe sample with artificial defects indicate that the system design is highly efficient. PMID:28335399

  3. An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design.

    Science.gov (United States)

    Rifai, Damhuji; Abdalla, Ahmed N; Razali, Ramdan; Ali, Kharudin; Faraj, Moneer A

    2017-03-13

    The use of the eddy current technique (ECT) for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT inspection system (DSECT) use for crack inspection on inner ferromagnetic pipes. The system consists of an array of giant magneto-resistive (GMR) sensors, a pneumatic system, a rotating magnetic field excitation source and a host PC acting as the data analysis center. Probe design parameters, namely probe diameter, an excitation coil and the number of GMR sensors in the array sensor is optimized using numerical optimization based on the desirability approach. The main benefits of DSECT can be seen in terms of its modularity and flexibility for the use of different types of magnetic transducers/sensors, and signals of a different nature with either digital or analog outputs, making it suited for the ECT probe design using an array of GMR magnetic sensors. A real-time application of the DSECT distributed system for ECT inspection can be exploited for the inspection of 70 mm carbon steel pipe. In order to predict the axial and circumference defect detection, a mathematical model is developed based on the technique known as response surface methodology (RSM). The inspection results of a carbon steel pipe sample with artificial defects indicate that the system design is highly efficient.

  4. An Eddy Current Testing Platform System for Pipe Defect Inspection Based on an Optimized Eddy Current Technique Probe Design

    Directory of Open Access Journals (Sweden)

    Damhuji Rifai

    2017-03-01

    Full Text Available The use of the eddy current technique (ECT for the non-destructive testing of conducting materials has become increasingly important in the past few years. The use of the non-destructive ECT plays a key role in the ensuring the safety and integrity of the large industrial structures such as oil and gas pipelines. This paper introduce a novel ECT probe design integrated with the distributed ECT inspection system (DSECT use for crack inspection on inner ferromagnetic pipes. The system consists of an array of giant magneto-resistive (GMR sensors, a pneumatic system, a rotating magnetic field excitation source and a host PC acting as the data analysis center. Probe design parameters, namely probe diameter, an excitation coil and the number of GMR sensors in the array sensor is optimized using numerical optimization based on the desirability approach. The main benefits of DSECT can be seen in terms of its modularity and flexibility for the use of different types of magnetic transducers/sensors, and signals of a different nature with either digital or analog outputs, making it suited for the ECT probe design using an array of GMR magnetic sensors. A real-time application of the DSECT distributed system for ECT inspection can be exploited for the inspection of 70 mm carbon steel pipe. In order to predict the axial and circumference defect detection, a mathematical model is developed based on the technique known as response surface methodology (RSM. The inspection results of a carbon steel pipe sample with artificial defects indicate that the system design is highly efficient.

  5. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1982-01-01

    A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established

  6. Piping design, analysis and support in an integrated data system; Diseno, analisis y soprotado de tuberias en un entorno de informacion integrada

    Energy Technology Data Exchange (ETDEWEB)

    Carnicero Iniguez, E. [Empresarios Agrupados, A. I. E. Madrid (Spain); Fujikawa, K.; Herzog, M.

    2000-07-01

    In a nuclear power plant, the area of piping design, analysis and support represents a massive volume of information necessary to the proper execution of the different engineering and design tasks carried out in said area. Such information includes input data that must be made available regarding process engineering and plant design (civil, mechanical, electrical, others), as well as data generated from the activities that are specific to the area of piping and piping support design, analysis and calculation. A significant part of the aforementioned information is shared by different organisations, each responsible for different tasks within the area, and must be made available for use by other areas, in addition to constituting the basis for piping and pipping supports fabrication and erection. The progresses achieved in information technologies, applied to the area of piping design, analysis and support of General Electric's advanced reactors, has led to designing an integrated data system in combination with the development of a now proven and mature work methodology. This system is satisfactorily used today in the advanced reactor project for Taipower (lungmen NPP. General Electric, 1300 MWe). The paper details the different technical and organisational aspects of the solution adopted, and defines integrated and distributed databases; it also describes the various design, analysis and calculation processes from the standpoint of the integration, computerization and control of the different processes, and established the solutions chosen to document them. (Author)

  7. Design and Development of Vision Based Blockage Clearance Robot for Sewer Pipes

    Directory of Open Access Journals (Sweden)

    Krishna Prasad Nesaian

    2012-03-01

    Full Text Available Robotic technology is one of the advanced technologies, which is capable of completing tasks at situations where humans are unable to reach, see or survive. The underground sewer pipelines are the major tools for the transportation of effluent water. A lot of troubles caused by blockage in sewer pipe will lead to overflow of effluent water, sanitation problems. So robotic vehicle that is capable of traveling at underneath effluent water determining blockage using ultrasonic sensors and clearing by means of drilling mechanism is done. In addition to that wireless camera is fixed which acts as a robot vision by which we can monitor video and capture images using MATLAB tool. Thus in this project a prototype model of underground sewer pipe blockage clearance robot with drilling type will be developed

  8. Analysis, Verification, and Application of Equations and Procedures for Design of Exhaust-Pipe Shrouds

    Science.gov (United States)

    1947-12-01

    exhaust fromthe mhmst frcunthe exhaust fromthe exhaust *8 to theeklxmstpipe gasto theexhmst pipe p@e to thecoolingaiz l)y w w yipeto theshroudby thermal...thesimplificationf thefinalresults. Equations for designtemperatures.- hot gasto a cold@s canbe re~esented where ii mean ;-mean heat~tranefer Q . b“S... gasto theexhaustpipebyIthermalrqdlation.If flapsor “ ejectorpumpsqreused,andthe pooling-airexitpressureis thw decreasedfromatmospheti.c,theapplicationof

  9. Interim report on containment design basis accidents: pipe rupture events in PHTS cells

    Energy Technology Data Exchange (ETDEWEB)

    Ginsberg, T; Gasser, R; Tsai, S S

    1976-12-01

    A preliminary analysis of pressure-temperature transients in CRBR primary heat transport system (PHTS) equipment cells, resulting from postulated breaks of primary system piping, has been performed. The combined effects of sodium spray fires and interactions arising from cell liner failure were considered in the analysis. No vent paths out of the PHTS cell were assumed. Results are presented and preliminary conclusions are discussed.

  10. Design and experimental gait analysis of a multi-segment in-pipe robot inspired by earthworm's peristaltic locomotion

    Science.gov (United States)

    Fang, Hongbin; Wang, Chenghao; Li, Suyi; Xu, Jian; Wang, K. W.

    2014-03-01

    This paper reports the experimental progress towards developing a multi-segment in-pipe robot inspired by earthworm's body structure and locomotion mechanism. To mimic the alternating contraction and elongation of a single earthworm's segment, a robust, servomotor based actuation mechanism is developed. In each robot segment, servomotor-driven cords and spring steel belts are utilized to imitate the earthworm's longitudinal and circular muscles, respectively. It is shown that the designed segment can contract and relax just like an earthworm's body segment. The axial and radial deformation of a single segment is measured experimentally, which agrees with the theoretical predictions. Then a multisegment earthworm-like robot is fabricated by assembling eight identical segments in series. The locomotion performance of this robot prototype is then extensively tested in order to investigate the correlation between gait design and dynamic locomotion characteristics. Based on the principle of retrograde peristalsis wave, a gait generator is developed for the multi-segment earthworm-like robot, following which gaits of the robot can be constructed. Employing the generated gaits, the 8-segment earthworm-like robot can successfully perform both horizontal locomotion and vertical climb in pipes. By changing gait parameters, i.e., with different gaits, locomotion characteristics including average speed and anchor slippage can be significantly tailored. The proposed actuation method and prototype of the multi-segment in-pipe robot as well as the gait generator provide a bionic realization of earthworm's locomotion with promising potentials in various applications such as pipeline inspection and cleaning.

  11. 46 CFR 154.520 - Piping calculations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping calculations. 154.520 Section 154.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Process Piping Systems § 154.520 Piping calculations. A piping system must be designed to meet...

  12. 49 CFR 195.114 - Used pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Used pipe. 195.114 Section 195.114 Transportation... PIPELINE Design Requirements § 195.114 Used pipe. Any used pipe installed in a pipeline system must comply with § 195.112 (a) and (b) and the following: (a) The pipe must be of a known specification and the...

  13. 49 CFR 195.112 - New pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false New pipe. 195.112 Section 195.112 Transportation... PIPELINE Design Requirements § 195.112 New pipe. Any new pipe installed in a pipeline system must comply with the following: (a) The pipe must be made of steel of the carbon, low alloy-high strength, or alloy...

  14. Optimized Design of the Mould for Steel Pipe Reshaping & Straightening Machine%钢管整径矫直机模具的优化设计

    Institute of Scientific and Technical Information of China (English)

    姚华; 李翠艳; 边城; 王庆雷

    2015-01-01

    In this article, it explored the current status and existing problems of reshaping& straightening technology for steel pipe. Combined with reshaping&straightening technology and equipment characteristics, the optimized design was carried out on the mould of steel pipe reshaping & straightening machine, it realized the objective of reshaping & straightening for the steel pipe which pipe diameter is not more than φ762 mm. For the steel pipe with diameter more than φ762 mm, during straightening process, the pipe wall is easily flattened, so the reshaping & straightening technology for straightness exceeding standard will be continuously researched.%探讨了当前钢管整径矫直技术的现状和存在的问题,并对钢管整径矫直工艺进行了介绍,结合钢管整径矫直工艺和设备特点对钢管整径矫直机模具进行了优化设计。研究结果表明,对于管径不大于762 mm的钢管,整径矫直效果良好,满足标准要求;对于管径大于762 mm的钢管,矫直过程中容易出现管壁压扁的问题,该问题还将继续进行深入研究。

  15. Optimized Design of Thermoelectric Energy Harvesting Systems for Waste Heat Recovery from Exhaust Pipes

    Directory of Open Access Journals (Sweden)

    Marco Nesarajah

    2017-06-01

    Full Text Available With the increasing interest in energy efficiency and resource protection, waste heat recovery processes have gained importance. Thereby, one possibility is the conversion of the heat energy into electrical energy by thermoelectric generators. Here, a thermoelectric energy harvesting system is developed to convert the waste heat from exhaust pipes, which are very often used to transport the heat, e.g., in automobiles, in industrial facilities or in heating systems. That is why a mockup of a heating is built-up, and the developed energy harvesting system is attached. To build-up this system, a model-based development process is used. The setup of the developed energy harvesting system is very flexible to test different variants and an optimized system can be found in order to increase the energy yield for concrete application examples. A corresponding simulation model is also presented, based on previously developed libraries in Modelica®/Dymola®. In the end, it can be shown—with measurement and simulation results—that a thermoelectric energy harvesting system on the exhaust pipe of a heating system delivers extra energy and thus delivers a contribution for a more efficient usage of the inserted primary energy carrier.

  16. An electrohydrodynamic heat pipe.

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    A heat pipe of new design, using an electrode structure to orient and guide the dielectric liquid phase flow, is proposed. Analysis indicates that the operation of the electrohydrodynamic heat pipe is in direct analogy to capillary devices, with the polarization force acting in place of capillarity. Advantages of these new heat pipes include greatly reduced liquid friction, electrohydrodynamically enhanced evaporation and condensation heat transfer, and a possible voltage-controlled on/off feature. Preliminary calculations indicate that relatively high performance devices are possible.

  17. Electrohydrodynamic heat pipes.

    Science.gov (United States)

    Jones, T. B.

    1973-01-01

    An electrohydrodynamic heat pipe of radical design is proposed which substitutes polarization electrohydrodynamic force effects for capillarity in collecting, guiding, and pumping a condensate liquid phase. The discussed device is restricted to the use of dielectric liquids as working fluids. Because of the relatively poor thermal transport properties of these liquids, capillary heat pipes using these liquids have not been high performance devices. The employment of the electrohydrodynamic concept should enhance this performance and help fill the performance gap that exists in the temperature range from 250 F to 750 F for 'conventional' capillary heat pipes.

  18. 浅谈安全阀的配管设计%Piping Design of Pressure Safety Vavles

    Institute of Scientific and Technical Information of China (English)

    孟飞

    2015-01-01

    随着经济的发展,石化行业已经成为我国经济发展的支柱产业。但是由于石化装置中设备多为高温高压,一旦出现问题将极易产生重大事故。安全阀作为压力容器的安全泄放装置,由于其结构简单、灵敏可靠,在压力容器上被大量采用。然而,在工程设计中人们一般只重视安全阀设定压力与排量,而忽视安全阀的配管设计,现结合工程实例,就安全阀的配管设计进行叙述,供相关人员参考。%With the development of economy , the petrochemical industry in China has become a pillar industry of economic development.The equipment in petrochemical plant has high temperature and high pressure , once appear problem will easily produce a major accident.Safety valves as a kind of safety relief devices are used a large number on pressure vessel , because of its simple structure , sensitive and reliable.However, designer is generally only pay attention to the safety valve set pressure and displacement , ignoring the piping design of safety valve.Combined with the engineering example , piping design of safety valves were introduced , the reference for the related person was provides.

  19. 新型切管机的设计与实现%Design and Implementation of New Pipe-cutting Machine

    Institute of Scientific and Technical Information of China (English)

    吴全

    2012-01-01

    A pipe-cutting machine to cut fixed length pipe was designed. The machine was electromechanical equipment. Servo technique was adopted to feed pipe in order to get fix length pipe. With double saw, circle cutting method was used to cut the pipe quickly and smoothly. The control software design was motion and function oriented to make the machine operate easily and flexibly.%主要讨论了用于定长切管的切管机的设计及实现方案.切管机为机电一体化设备,根据定长切管的功能要求,采用伺服技术进行定长送料;采取双锯片实现环切,以快速平整好将管切断,并将切断的管料送往下一环节;在程序设计方面,采用面向功能动作的方法进行编程,使得机床的操作更加灵活方便.

  20. Does Implementation Follow Design? A Case Study of a Workplace Health Promotion Program Using the 4-S Program Design and the PIPE Impact Metric Evaluation Models.

    Science.gov (United States)

    Äikäs, Antti Hermanni; Pronk, Nicolaas P; Hirvensalo, Mirja Hannele; Absetz, Pilvikki

    2017-08-01

    The aim of this study was to describe the content of a multiyear market-based workplace health promotion (WHP) program and to evaluate design and implementation processes in a real-world setting. Data was collected from the databases of the employer and the service provider. It was classified using the 4-S (Size, Scope, Scalability, and Sustainability) and PIPE Impact Metric (Penetration, Implementation) models. Data analysis utilized both qualitative and quantitative methods. Program design covered well the evidence-informed best practices except for clear path toward sustainability, cooperation with occupational health care, and support from middle-management supervisors. The penetration rate among participants was high (99%) and majority (81%) of services were implemented as designed. Study findings indicate that WHP market would benefit the use of evidence-based design principles and tendentious decisions to anticipate a long-term implementation process already during the planning phase.

  1. 46 CFR 154.522 - Materials for piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Materials for piping. 154.522 Section 154.522 Shipping... Process Piping Systems § 154.522 Materials for piping. (a) The materials for piping systems must meet § 154.625 for the minimum design temperature of the piping, except the material for open ended...

  2. Nitrogen heat pipe for cryocooler thermal shunt

    Energy Technology Data Exchange (ETDEWEB)

    Prenger, F.C.; Hill, D.D.; Daney, D.E.; Daugherty, M.A. [Los Alamos National Lab., NM (United States); Green, G.F.; Roth, E.W. [Naval Surface Warfare Center, Annapolis, MD (United States)

    1995-09-01

    A nitrogen heat pipe was designed, built and tested for the purpose of providing a thermal shunt between the two stages of a Gifford-McMahan (GM) cryocooler during cooldown. The nitrogen heat pipe has an operating temperature range between 63 and 123 K. While the heat pipe is in the temperature range during the system cooldown, it acts as a thermal shunt between the first and second stage of the cryocooler. The heat pipe increases the heat transfer to the first stage of the cryocooler, thereby reducing the cooldown time of the system. When the heat pipe temperature drops below the triple point, the nitrogen working fluid freezes, effectively stopping the heat pipe operation. A small heat leak between cryocooler stages remains because of axial conduction along the heat pipe wall. As long as the heat pipe remains below 63 K, the heat pipe remains inactive. Heat pipe performance limits were measured and the optimum fluid charge was determined.

  3. Literature review and experimental investigation of heat pipes

    Science.gov (United States)

    Barsch, W. O.; Schoenhals, R. J.; Viskanta, R.; Winter, E. R. F.

    1971-01-01

    Tests on heat pipes determine operational limits, external boundary conditions, noncondensable gas effects, startup behavior, and geometric configurations. Experiment consists of design, construction, and testing of an apparatus for measuring wick properties, conventional heat pipes and coplanar heat pipes.

  4. 可变径煤矿管道检测机器人的设计%Design of variable diameter detection robot for colliery pipes

    Institute of Scientific and Technical Information of China (English)

    张峰

    2011-01-01

    在煤矿生产中使用大量的管道,其质量关系到整个煤矿的安全和高效生产。为提高管道寿命,预防管道老化、腐蚀及断裂等问题,并实现高效准确地故障诊断,笔者设计了一种可变径管道检测机器人,并建立了机器人三维模型,利用ADAMS对其进行运动仿真,从而验证了机器人在直径为220-300mm的管道中自由行走和检测的可行性。%Plenty of pipes are used in collieries, their quality relates to the safe and efficient production in collieries. In order to enhance the pipe lifespan and prevent the aging, corrosion and breaking of the pipe so as to realize the accurate and efficient fault diagnosis, a kind of variable diameter detection robot for colliery pipes is designed. In addition, a 3D model of the robot is built, and the kinematic simulation is carried out by ADAMS. The results show that the robot is able to freely walk and detect faults in pipes whose diameter ranging from 220 mm to 300 mm.

  5. 新型石油钻杆液压矫直机结构分析%Analysis and Design of Oil Drill Pipe Hydraulic Straightening Machine

    Institute of Scientific and Technical Information of China (English)

    石永军; 白立剑; 王维旭

    2013-01-01

    Considering the disadvantages of the existing drill pipe hydraulic straightening machines which have low straightening accuracy and low efficiency,a new kind of drill pipe hydraulic straightening machine was designed,adopting three-point straightening principle to straighten curving drill pipe.Its rotating mechanism first rotates the curving drill pipe and detects the curving position,and then the movable machine moves the drill pipe to make the curving position aligned to the pressure head.The finite element method is used to check the key parts of strength,which satisfied the operating requirement.%目前的钻杆矫直装置存在矫直精度低和工作效率低的问题.设计了一种新型的石油钻杆液压矫直机.采用三点矫直原理对弯曲钻杆进行矫直,通过旋转机构旋转钻杆,并检测出弯曲位置.由移动式主机移动钻杆,使弯曲位置对准压头,提高了工作效率和矫直精度.应用有限元方法分析了关键部件的强度,满足使用要求.

  6. The Designation Method of Bend Forming Dies for Aluminum Tube of PE-Al-PE Composite Pipe

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The PE-Al-PE composite pipe is a multiplayer pipe t hat is composed of PE (polyethylene) and Aluminum. Al is inlayed the inner PE la yer and the outer PE layer. In the producing technological process of this kind of pipe the bend forming of Al belt to tube is very important. It is the bend fo rming dies that are used in the process of producing PE-Al-PE pipe that is stu died in this article. To make a elaborate division, these dies can be classified as bending dies and forming dies here. In this paper, t...

  7. A Designer Fluid For Aluminum Phase Change Devices. Performance Enhancement in Copper Heat Pipes Performance Enhancement in Copper Heat Pipes. Volume 3

    Science.gov (United States)

    2016-11-17

    34 Renewable and Sustainable Energy Reviews , 20, pp. 397-410, 2013. [42] Liu, Z.-H., Li, Y.-Y., and Bao, R., "Thermal performance of inclined grooved...enhancement— research gap to engineering application," Progress in Nuclear Energy , 66, pp. 13-24, 2013. [39] Ahn, H. S., and Kim, M. H., "A review on...Heat Pipes," Proc. ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and

  8. Design of Refractory Metal Heat Pipe Life Test Environment Chamber, Cooling System, and Radio Frequency Heating System

    Science.gov (United States)

    Martin, J. J.; Bragg-Sitton, S. M.; Reid, R. S.; Stewart, E. T.; Davis, J. D.

    2011-01-01

    A series of 16 Mo-44.5%Re alloy/sodium heat pipes will be experimentally tested to examine heat pipe aging. To support this evaluation, an environmental test chamber and a number of auxiliary subsystems are required. These subsystems include radio frequency (RF) power supplies/inductive coils, recirculation water coolant loops, and chamber gas conditioning. The heat pipes will be grouped, based on like power and gas mixture requirements, into three clusters of five units each, configured in a pentagonal arrangement. The highest powered heat pipe will be tested separately. Test chamber atmospheric purity is targeted at test hardware, providing warning indicators followed by automatic shutdown should potentially damaging conditions develop. During hardware construction, a number of checkout tests.many making use of stainless steel prototype heat pipes that are already fabricated.will be required to verify operation.

  9. Silicon Heat Pipe Array

    Science.gov (United States)

    Yee, Karl Y.; Ganapathi, Gani B.; Sunada, Eric T.; Bae, Youngsam; Miller, Jennifer R.; Beinsford, Daniel F.

    2013-01-01

    Improved methods of heat dissipation are required for modern, high-power density electronic systems. As increased functionality is progressively compacted into decreasing volumes, this need will be exacerbated. High-performance chip power is predicted to increase monotonically and rapidly with time. Systems utilizing these chips are currently reliant upon decades of old cooling technology. Heat pipes offer a solution to this problem. Heat pipes are passive, self-contained, two-phase heat dissipation devices. Heat conducted into the device through a wick structure converts the working fluid into a vapor, which then releases the heat via condensation after being transported away from the heat source. Heat pipes have high thermal conductivities, are inexpensive, and have been utilized in previous space missions. However, the cylindrical geometry of commercial heat pipes is a poor fit to the planar geometries of microelectronic assemblies, the copper that commercial heat pipes are typically constructed of is a poor CTE (coefficient of thermal expansion) match to the semiconductor die utilized in these assemblies, and the functionality and reliability of heat pipes in general is strongly dependent on the orientation of the assembly with respect to the gravity vector. What is needed is a planar, semiconductor-based heat pipe array that can be used for cooling of generic MCM (multichip module) assemblies that can also function in all orientations. Such a structure would not only have applications in the cooling of space electronics, but would have commercial applications as well (e.g. cooling of microprocessors and high-power laser diodes). This technology is an improvement over existing heat pipe designs due to the finer porosity of the wick, which enhances capillary pumping pressure, resulting in greater effective thermal conductivity and performance in any orientation with respect to the gravity vector. In addition, it is constructed of silicon, and thus is better

  10. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1994-01-01

    It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject. This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5. Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection mo

  11. Design Considerations for Lightweight Space Radiators Based on Fabrication and Test Experience with a Carbon-Carbon Composite Prototype Heat Pipe

    Science.gov (United States)

    Juhasz, Albert J.

    1998-01-01

    This report discusses the design implications for spacecraft radiators made possible by the successful fabrication and Proof-of-concept testing of a graphite-fiber-carbon-matrix composite (i.e., carbon-carbon (C-C)) heat pipe. The proto-type heat pipe, or space radiator element, consists of a C-C composite shell with integrally woven fins. It has a thin-walled furnace-brazed metallic (Nb-1%Zr) liner with end caps for containment of the potassium working fluid. A short extension of this liner, at increased wall thickness beyond the C-C shell, forms the heat pipe evaporator section which is in thermal contact with the radiator fluid that needs to be cooled. From geometric and thermal transport properties of the C-C composite heat pipe tested, a specific radiator mass of 1.45 kg/m2 can be derived. This is less than one-fourth the specific mass of present day satellite radiators. The report also discusses the advantage of segmented space radiator designs utilizing heat pipe elements, or segments, in their survivability to micro-meteoroid damage. This survivability is further raised by the use of condenser sections with attached fins, which also improve the radiation heat transfer rate. Since the problem of heat radiation from a fin does not lend itself to a closed analytical solution, a derivation of the governing differential equation and boundary conditions is given in appendix A, along with solutions for rectangular and parabolic fin profile geometries obtained by use of a finite difference computer code written by the author.

  12. Design Considerations for Lightweight Space Radiators Based on Fabrication and Test Experience With a Carbon-Carbon Composite Prototype Heat Pipe. Revised

    Science.gov (United States)

    Juhasz, Albert J.

    2002-01-01

    This report discusses the design implications for spacecraft radiators made possible by the successful fabrication and proof-of-concept testing of a graphite-fiber-carbon-matrix composite (i.e., carbon-carbon (C-C)) heat pipe. The prototype heat pipe, or space radiator element, consists of a C-C composite shell with integrally woven fins. It has a thin-walled furnace-brazed metallic (Nb-1%Zr) liner with end caps for containment of the potassium working fluid. A short extension of this liner, at increased wall thickness beyond the C-C shell, forms the heat pipe evaporator section which is in thermal contact with the radiator fluid that needs to be cooled. From geometric and thermal transport properties of the C-C composite heat pipe tested, a specific radiator mass of 1.45 kg/sq m can be derived. This is less than one-fourth the specific mass of present day satellite radiators. The report also discusses the advantage of segmented space radiator designs utilizing heat pipe elements, or segments, in their survivability to micrometeoroid damage. This survivability is further raised by the use of condenser sections with attached fins, which also improve the radiation heat transfer rate. Since the problem of heat radiation from a fin does not lend itself to a closed analytical solution, a derivation of the governing differential equation and boundary conditions is given in appendix A, along with solutions for rectangular and parabolic fin profile geometries obtained by use of a finite difference computer code written by the author.

  13. Large-bore pipe decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.

    1998-01-01

    The decontamination and decommissioning (D and D) of 1200 buildings within the US Department of Energy-Office of Environmental Management (DOE-EM) Complex will require the disposition of miles of pipe. The disposition of large-bore pipe, in particular, presents difficulties in the area of decontamination and characterization. The pipe is potentially contaminated internally as well as externally. This situation requires a system capable of decontaminating and characterizing both the inside and outside of the pipe. Current decontamination and characterization systems are not designed for application to this geometry, making the direct disposal of piping systems necessary in many cases. The pipe often creates voids in the disposal cell, which requires the pipe to be cut in half or filled with a grout material. These methods are labor intensive and costly to perform on large volumes of pipe. Direct disposal does not take advantage of recycling, which could provide monetary dividends. To facilitate the decontamination and characterization of large-bore piping and thereby reduce the volume of piping required for disposal, a detailed analysis will be conducted to document the pipe remediation problem set; determine potential technologies to solve this remediation problem set; design and laboratory test potential decontamination and characterization technologies; fabricate a prototype system; provide a cost-benefit analysis of the proposed system; and transfer the technology to industry. This report summarizes the activities performed during fiscal year 1997 and describes the planned activities for fiscal year 1998. Accomplishments for FY97 include the development of the applicable and relevant and appropriate regulations, the screening of decontamination and characterization technologies, and the selection and initial design of the decontamination system.

  14. Design Study Based on Thermal Insulation Structure of Heat Pipe Network%基于热力管网保温结构的设计研究

    Institute of Scientific and Technical Information of China (English)

    梁洁

    2013-01-01

    Thermal network is used for the steam distribution pipe network system, in the distribution process,as the steam temperature with the surrounding environmentdifference is too large, it will cause losing steam enthalpy, thus the thermal effi-ciency of heating pipe network is greatly reduced. Through the analysis of various factors affecting the thermal pipe insula-tion, such as insulation structure design, material properties, construction quality, various measures are discussed to improve the heat pipe insulation effect.%热力管网是用于蒸汽配送的管道网络系统,在配送过程中,由于蒸汽与周围环境的温差过大,会在这一过程中损失掉不少的蒸汽热焓,从而使热力管网的输送热效率大为降低。通过分析影响热力管网保温节能的各种因素,如保温结构设计、保温材料性能、施工质量等,对提高热力管网保温效果的各种措施进行了探讨。

  15. Mechanical Structure Design of PGZX-1 Pipe Climbing Robot%PGZX-1型炉管爬行机器人机械结构设计

    Institute of Scientific and Technical Information of China (English)

    张灵聪; 李浩; 仲于海

    2012-01-01

    PGZX-1 pipe is specific reference the straight pipe which pipe diameter is from 50 mm to 90 mm, and its tube spacing is 30 mm. At present, most factory boiler pipes and heating pipes of thermal power plant belong to it It is easily to have serious cementation phenomenon that heated the furnace tube for a long time, and the cementation will make the pipe wall material carbon amount to advance, thus cause the pipe wall hardening changes crisp, extremely easy to create the furnace tube break. The frequent examination to the tube column can know the furnace tube interior cementation situation, will guarantee the work more stable and more safe. One kind robot is proposed that can climb the tube column, and it can climb the tube does not on the limit of column material and the caliber. It will reduce the size and weight of the new robot This design aimed at the problem which is that the tube spacing is narrow and small, the caliber change and the body distortion we faced while we do the work of tube crawling. The robot's principle plan, and elaborated the design of the new crawl robot primary mechanical structure principle are introduced.%PGZX-1型炉管特指管径在50 mm-90 mm,管间距在30 mm左右的直管.目前很多化工厂锅炉管道和热电厂加热管均属于PGZX-1型炉管.因长期受热,炉管极易产生严重的渗碳现象,需对管柱渗碳层厚度进行检测,以随对了解炉管内部渗碳情况,确保工作的稳定性及安全性.提出了一种能够攀爬管柱的机器人,这种机器人不受攀爬管柱材料和管径限制,在尺寸及重量上实现最小化.对炉管爬行工作时面临的管间距狭小,管径变动及管体变形进行了针对性设计,介绍了新型爬管机器人的原理方案,阐述了新型爬管机器人主要机械结构的设计原理.

  16. 49 CFR 195.128 - Station piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Station piping. 195.128 Section 195.128 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.128 Station piping. Any pipe to be installed in a station that...

  17. 33 CFR 127.1101 - Piping systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Piping systems. 127.1101 Section... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1101 Piping systems. Each piping system within the marine transfer area for LHG used for the transfer of LHG must meet the...

  18. Simulation and model design of pipe-shell reactor for the direct synthesis of dimethyl ether from syngas

    Institute of Scientific and Technical Information of China (English)

    Yanfang Hu; Zhaoguang Nie; Dingye Fang

    2008-01-01

    The simulation was made based on the model of pipe-shell reactor that was established by the model of global kinetics of synthesis of dimethyl ether from syngas over a bifunctional catalyst. The results of simulation showed that the selectivity for dimethyl ether (DME) and the conversion of CO were higher but the hot spot was kept below the temperature limit of the pipe-shell reactor. The suitable diameter of the pipe was φ38e pipe was 5.8 m. The optimal process conditions of the reactor were that the pressure was 5 MPa, the temperature of the cooling water was 240 ℃, and the temperature of the raw gas at inlet of the reactor was 220 ℃. The production of this reactor was 102800 t/y (ton per year) under these conditions.

  19. On the Design of a Reinforced Concrete Pipe for a Heat Supply Tunnel Constructed by Pipe Jacking%顶管法热力隧道钢筋混凝土管设计研究

    Institute of Scientific and Technical Information of China (English)

    董淑棉

    2013-01-01

    Mechanical pipe jacking construction technology is characterized by many advantages,such as fast construction,high automation,safety,reliability,and less impact on surroundings; it is therefore of great importance in the construction of heat supply tunnels.During the operation phase,a heat supply tunnel will be subjected to a high environmental temperature and internal forces of constant thrust,guiding thrust,and so on.This paper analyzes the deformation and mechanical state of the mechanically jacked reinforced concrete pipe for a heat supply tunnel in different temperatures by means of field testing and theoretical calculation.The results were verified by engineering practice.Additionally,it summarizes how the design and calculation method for reinforced concrete pipes are applicable to heat supply engineering.Finally,it concludes that the calculation results for the structural design of the reinforced concrete pipe in a jacked heat supply tunnel are similar to the test results with more safety redundancy,provided that a reduction method for the concrete strength and elastic modulus is used.%机械顶管施工技术具有施工速度快、自动化程度高、安全可靠、对周围环境影响小等优点,将顶管技术用于热力隧道施工中,具有重要意义.热力隧道在运行过程中,存在较高的环境温度,有固定推力、导向推力等内作用力.文章通过现场试验和理论计算,研究分析了热力机械钢筋混凝土顶管在不同温度工况下的变形和力学状态,并通过工程实践进行了验证;总结出了适用于热力工程的钢筋混凝土管的设计计算方法.分析结果表明,采取混凝土强度值及弹性模量折减的方法进行顶管法热力隧道钢筋混凝土管的结构设计,其计算与试验结果较为接近,更偏于安全.

  20. Promethus Hot Leg Piping Concept

    Energy Technology Data Exchange (ETDEWEB)

    AM Girbik; PA Dilorenzo

    2006-01-24

    The Naval Reactors Prime Contractor Team (NRPCT) recommended the development of a gas cooled reactor directly coupled to a Brayton energy conversion system as the Space Nuclear Power Plant (SNPP) for NASA's Project Prometheus. The section of piping between the reactor outlet and turbine inlet, designated as the hot leg piping, required unique design features to allow the use of a nickel superalloy rather than a refractory metal as the pressure boundary. The NRPCT evaluated a variety of hot leg piping concepts for performance relative to SNPP system parameters, manufacturability, material considerations, and comparison to past high temperature gas reactor (HTGR) practice. Manufacturability challenges and the impact of pressure drop and turbine entrance temperature reduction on cycle efficiency were discriminators between the piping concepts. This paper summarizes the NRPCT hot leg piping evaluation, presents the concept recommended, and summarizes developmental issues for the recommended concept.

  1. 沟槽式平板铝热管设计与性能分析%Design and Experimental Analysis of Grooved Flat Aluminum Heat Pipe

    Institute of Scientific and Technical Information of China (English)

    沈玉琴; 陆龙生; 张仕伟; 黄光汉

    2014-01-01

    基于相变传热原理的微热管在高效太阳能利用热控制方面具有良好应用空间。针对太阳能平板集热器的热控制需求,在沟槽式平板铝热管的设计过程中,综合分析了工质、管壳材料、管芯结构和充液率等因素对性能的影响;并搭建试验平台对制造的沟槽式平板铝热管进行性能测试。得出以下结论:不凝性气体对热管传热性能有较大的影响,应加强热管防漏措施;制作过程应该严格控制清洗、充装、封接等工序以确保质量;适当的充液量有助于提高热管等温性能。%With the working principle of phase-change heat transfer,micro heat pipe has a broad application space in the respect of highly efficient solar thermal control. According to growing thermal control demand for solar plane heat collectors,design of grooved flat aluminum heat pipe was discussed. Various factors influencing heat transfer performance such as working fluid,material of heat pipe shell,wick structure and filling rate were studied. An experimental platform was set up to investigate the characteristics of fabrica-ted heat pipes heat transfer performance both experimentally and analytically. The conclusions are that non-condensable gases has great impact on performance of heat pipes,so measures should be taken to avoid leaking;in order to ensure heat pipe quality,the processes of cleaning,filling of working fluid and sealing need to be careful;reasonable filling rate helps boost heat pipe ability of temperature u-niformity.

  2. Evolutionary design of a generalized polynomial neural network for modelling sediment transport in clean pipes

    Science.gov (United States)

    Ebtehaj, Isa; Bonakdari, Hossein; Khoshbin, Fatemeh

    2016-10-01

    To determine the minimum velocity required to prevent sedimentation, six different models were proposed to estimate the densimetric Froude number (Fr). The dimensionless parameters of the models were applied along with a combination of the group method of data handling (GMDH) and the multi-target genetic algorithm. Therefore, an evolutionary design of the generalized GMDH was developed using a genetic algorithm with a specific coding scheme so as not to restrict connectivity configurations to abutting layers only. In addition, a new preserving mechanism by the multi-target genetic algorithm was utilized for the Pareto optimization of GMDH. The results indicated that the most accurate model was the one that used the volumetric concentration of sediment (CV), relative hydraulic radius (d/R), dimensionless particle number (Dgr) and overall sediment friction factor (λs) in estimating Fr. Furthermore, the comparison between the proposed method and traditional equations indicated that GMDH is more accurate than existing equations.

  3. 30 CFR 75.1905-1 - Diesel fuel piping systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Diesel fuel piping systems. 75.1905-1 Section... Diesel fuel piping systems. (a) Diesel fuel piping systems from the surface must be designed and operated... spillage of fuel and that activates an alarm system. (b) All piping, valves and fittings must be—...

  4. 46 CFR 153.294 - Marking of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Marking of piping systems. 153.294 Section 153.294... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.294 Marking of piping systems. (a) Each cargo piping...

  5. 46 CFR 154.528 - Piping joints: Flange type.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Flange type. 154.528 Section 154.528... and Process Piping Systems § 154.528 Piping joints: Flange type. (a) A flange must be one of the following types: (1) Welding neck. (2) Slip-on. (3) Socket weld. (b) If the piping is designed for...

  6. 46 CFR 154.519 - Piping relief valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo piping system from liquid pressure exceeding the design pressure must discharge into: (1) A cargo...

  7. 46 CFR 153.292 - Separation of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Separation of piping systems. 153.292 Section 153.292... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.292 Separation of piping systems. Cargo piping systems must...

  8. Piping Design of Jinchengtai Coal Gasification Plant%金诚泰煤制甲醇项目气化装置管线设计

    Institute of Scientific and Technical Information of China (English)

    蔡国峰

    2012-01-01

    煤气化技术是煤炭高效清洁利用的核心技术,非熔渣—熔渣分级气化技术是我国完全自主知识产权的煤气化技术。本文以金诚泰煤制甲醇项目气化装置为例介绍了非熔渣—熔渣分级气化装置工艺流程、设备布置、部分管线材料的选择、阀门的选型和关键工艺管线的布置,提出了优化管道布置设计的建议。%Coal gasification was the key process for clean and high-efficiency coal utilization.Non-slag and slag stage technology was our country's own gasification technology.The characteristics of the coal gasification technology,the equipment layout of this coal gasification technology,the piping materials,valves selection and piping design were introduced by Jinchengtai Coal Gasification Plant,and the proposal for piping design was proposed.

  9. Design of Heat Pipe Type Adsorption Ice Maker for Fishing Boats%热管型船用吸附制冰机的设计

    Institute of Scientific and Technical Information of China (English)

    王丽伟; 王如竹; 夏再忠; 吴静怡

    2005-01-01

    A heat pipe type adsorption ice maker with two adsorbers for fishing boats is designed by using ammonia as refrigerant and compound of activated carbon-CaCl2 as adsorbent. This type of heat pipe adsorber can solve the problem of incompatibility between ammonia, copper, seawater and steel. The working process of the ice maker with 8.7kg adsorbent per bed is simulated. The results show that the optimal semi-cycle time is about 9min at the evaporating temperature of -15℃, where the corresponding cooling power, specific cooling power per kilogram adsorbent SCP and coefficient of refrigerant performance COP are respectively 3.6 kW, 217W·kg-1 and 0.404.

  10. ABSTRACTS WELDEL PIPE AND TUBE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    ABSTRACTS WELDEL PIPE AND TUBE Vol.24 No.3 May.2001 Huang Jingan(1) Strengthen, Intercourse, Coordination and Promote the Development Together Liang Aiyu(11) The Production and the Development of the Water supply pipe for City Construction From the aspects of the quality, appearance, environment protection, economic analysis etc., This article evaluates the galvanized pipe, plastic steel complex pipe, plastic aluminum pipe, stainless pipe for city water supply. In accordance with the requirements of the city construction programming and development, it is considered that the plastic aluminum pipe and plastic steel pipe instead of galvanization pipe is the trend of the development. The author also gives some constructive proposals for reference. Subject Terms:galvanized pipe complex pipe stainless pipe city water supply evaluation Zhao Rongbin,Li Guangjun(14) The TIG welding of Protected Tantalum-pipe for sheathed thermocouples used in corrosive environment The protected Tantalum-pipe welding of sheathed therocouples was investigated by TIG. The welding process and its key parameters were introduced. Welding quality influenced by processing was discussed. Subject Terms:welding protected Tantalum-pipe corrosion He Defu et al(18) Design and Research for An Automatic MIG Welding Machine of Catalyst Converter of Automobile Two different schemes for automatic MIG welding of catalyst converter of automobile have been compared and analysed. A design of automatic MIG welding machine used for catalyst converter of automobile has been suggested in this paper. Subject Terms:environmental protection automobile tri-catalyst converter MIG welding automatic welding PLC Fang Chucai(24) Cold Crack Analysis of Low Alloy High Strength Steel Weld Seam Heat Affected Area During the welding of low alloy high strength (X65 and above), the fine crack occurs in the weld (especially inner weld) and the low plastic hard brickle structure occurs in the Heat Affected Area (HAZ) sometime. This

  11. 高频焊管锁相电路设计%Phase Lock Circuit Design for High-frequency Welded(HFW) Pipe

    Institute of Scientific and Technical Information of China (English)

    付立功; 轩宗志; 葛永国; 轩宗震

    2014-01-01

    对锁相电路、高频焊管电路以及锁相环的基本原理做了详细的论述,并对高频焊管生产线上的锁相电路的设计及其在高频焊管机组中的使用、调整以及维护进行了详细分析。实践证明,锁相环具有频率自动跟踪和相位自动控制的功能,对于频率1MHz以下,用CD4046锁相环作为高频焊管锁相电路非常实用,电路简单,抗干扰,运行可靠,足以保证高频焊管电源可靠工作。%In this article, it expatiated the phase lock circuit, HFW pipe circuit and the basic principle of phase-locked loop, and detailedly analyzed design, application, adjustment and maintenance of phase lock in HFW pipe production line. Practice proved that the phase-locked loop possesses functions of frequency automatic tracking and phase automatic control. For frequencies below 1 MHz, using phase-locked loop CD4046 as phase locked circuit for HFW pipe is very practical, the circuit is simple, anti-interference, reliable operation, and it is enough to guarantee the high frequency welded pipe reliable work.

  12. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  13. PPOOLEX experiments with two parallel blowdown pipes

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-01-15

    This report summarizes the results of the experiments with two transparent blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through either one or two vertical transparent blowdown pipes to the condensation pool. Five experiments with one pipe and six with two parallel pipes were carried out. The main purpose of the experiments was to study loads caused by chugging (rapid condensation) while steam is discharged into the condensation pool filled with sub-cooled water. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. In the experiments the initial temperature of the condensation pool water varied from 12 deg. C to 55 deg. C, the steam flow rate from 40 g/s to 1 300 g/s and the temperature of incoming steam from 120 deg. C to 185 deg. C. In the experiments with only one transparent blowdown pipe chugging phenomenon didn't occur as intensified as in the preceding experiments carried out with a DN200 stainless steel pipe. With the steel blowdown pipe even 10 times higher pressure pulses were registered inside the pipe. Meanwhile, loads registered in the pool didn't indicate significant differences between the steel and polycarbonate pipe experiments. In the experiments with two transparent blowdown pipes, the steamwater interface moved almost synchronously up and down inside both pipes. Chugging was stronger than in the one pipe experiments and even two times higher loads were measured inside the pipes. The loads at the blowdown pipe outlet were approximately the same as in the one pipe cases. Other registered loads around the pool were about 50-100 % higher than with one pipe. The experiments with two parallel blowdown pipes gave contradictory results compared to the earlier studies dealing with chugging loads in case of multiple pipes. Contributing

  14. 直缝焊管自动超声探伤系统设计%Design of Automatic Ultrasonic Inspection System of Longitudinal Welded Pipe

    Institute of Scientific and Technical Information of China (English)

    周平

    2016-01-01

    针对直缝焊管生产中传统应用手工探伤效率低、故障率高等问题,利用超声无损探伤精度高、速度快的优点,构建以可编程控制器(PLC)为核心的直缝焊管自动超声探伤系统。提出该系统的工艺参数和系统机械构成,设计系统的 PLC 控制硬件、PLC 程序流程及 PLC 控制程序。系统的操作监控硬件选用台达触摸屏,给出基于 Windows 系统触摸屏编程软件设计的人机操作监控画面。运行结果显示:该系统结构稳定、可靠。%Aiming at the problem of low manual detection efficiency and high failure rate in traditional longitudinal wel-ded pipe production,using the advantages of high accuracy,high speed of ultrasonic nondestructive testing,taking the programmable controller (PLC)as the core,a set of automatic ultrasonic inspection system of the longitudinal welded pipe is designed.The paper summarizes the longitudinal-seam welded pipe automatic ultrasonic inspection system.The process parameters and the mechanical structure of the system are put forward,and the PLC control hardware,program flow and control procedures of the system are designed accordingly.A touch screen is chosen for system operation monito-ring,and the man-machine operation monitoring picture based on the touch screen programming software design of the Windows system is given.

  15. Alpha detection in pipes using an inverting membrane scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick, D.T.; Cremer, C.D.; Lowry, W. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)] [and others

    1995-10-01

    Characterization of surface alpha emitting contamination inside enclosed spaces such as piping systems presents an interesting radiological measurement challenge. Detection of these alpha particles from the exterior of the pipe is impossible since the alpha particles are completely absorbed by the pipe wall. Traditional survey techniques, using hand-held instruments, simply can not be used effectively inside pipes. Science and Engineering Associates, Inc. is currently developing an enhancement to its Pipe Explorer{trademark} system that will address this challenge. The Pipe Explorer{trademark} uses a unique sensor deployment method where an inverted tubular membrane is propagated through complex pipe runs via air pressure. The inversion process causes the membrane to fold out against the pipe wall, such that no part of the membrane drags along the pipe wall. This deployment methodology has been successfully demonstrated at several DOE sites to transport specially designed beta and gamma, scintillation detectors into pipes ranging in length up to 250 ft.

  16. Control of low-frequency noise for piping systems via the design of coupled band gap of acoustic metamaterials

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yanfei [College of Power Engineering, Naval University of Engineering, Wuhan, 430033 (China); Shen, Huijie, E-mail: shj588@163.com [College of Power Engineering, Naval University of Engineering, Wuhan, 430033 (China); Zhang, Linke [School of Energy and Power Engineering, Wuhan University of Technology, Wuhan, 430063 (China); Su, Yongsheng, E-mail: suyongsheng1981@163.com [College of Power Engineering, Naval University of Engineering, Wuhan, 430033 (China); Yu, Dianlong [Key Laboratory of Science and Technology on Integrated Logistics Support, National University of Defense Technology, Changsha 410073 (China)

    2016-07-01

    Acoustic wave propagation and sound transmission in a metamaterial-based piping system with Helmholtz resonator (HR) attached periodically are studied. A transfer matrix method is developed to conduct the investigation. Calculational results show that the introduction of periodic HRs in the piping system could generate a band gap (BG) near the resonant frequency of the HR, such that the bandwidth and the attenuation effect of HR improved notably. Bragg type gaps are also exist in the system due to the systematic periodicity. By plotting the BG as functions of HR parameters, the effect of resonator parameters on the BG behavior, including bandwidth, location and attenuation performance, etc., is examined. It is found that Bragg-type gap would interplay with the resonant-type gap under some special situations, thereby giving rise to a super-wide coupled gap. Further, explicit formulation for BG exact coupling is extracted and some key parameters on modulating the width and the attenuation coefficient of coupled gaps are investigated. The coupled gap can be located to any frequency range as one concerned, thus rendering the low-frequency noise control feasible in a broad band range. - Highlights: • A metamaterial-type pipe system with Bragg and resonant acoustic gaps. • A low-frequency acoustic coupled gap. • Exact coupling condition for Bragg and resonant gaps. • Effects of resonant parameters on coupled gaps.

  17. Heat Pipe Systems

    Science.gov (United States)

    1988-01-01

    Solar Fundamentals, Inc.'s hot water system employs space-derived heat pipe technology. It is used by a meat packing plant to heat water for cleaning processing machinery. Unit is complete system with water heater, hot water storage, electrical controls and auxiliary components. Other than fans and a circulating pump, there are no moving parts. System's unique design eliminates problems of balancing, leaking, corroding, and freezing.

  18. 基于钢管材料的现代金属家具创新设计%Mordern Metal Furniture Design Innovation Based on Steel Pipe

    Institute of Scientific and Technical Information of China (English)

    潘文芳

    2016-01-01

    The writer recalls the development process of steel pipe furniture, summarizes the innovative methods of modern furniture design, such as technology and process innovation, multifunctional design, composition and proportion of design, visual language design, and proposed the design direction of traditional culture elements combining with modern steel pipe material. The group designed steel pipe furniture quite similar but different from the prototype on the basis of the Ming Dynasty furniture styling and humanistic spirit analysis, through the decorative symbols simplifying and extraction. The traditional cultural elements weakens the cold sense of metal furniture, and enhances the cultural properties and aesthetic tastes. To get series of design, the group referenced modular design thinking, maintained the same frame, and only took the brain shape changed.%回顾钢管家具的发展历程,总结了现代家具的创新设计方法,如技术与工艺的创新,多功能设计,构成与比例的设计,视觉语言的设计,提出传统文化元素与现代钢管材料结合的设计方向。在对明代家具的造型特征和人文精神进行分析的基础上,对明代家具的装饰符号进行抽取和简化,结合钢管的造型特点,设计出与原型神似而形异的钢管家具。融入传统文化元素,弱化了金属家具的冷峻感,增强金属家具的文化属性和审美趣味。借鉴模块化设计思想,保持座面及框架不变,改变搭脑的形态获得系列设计。

  19. SWMM在保山市某区雨水管网设计中的应用%AppIication of SWMM in design of rainwater pipe network for Baoshan city

    Institute of Scientific and Technical Information of China (English)

    廖江; 施永生; 豆洁; 王东伟

    2015-01-01

    Taking the design of rainwater pipe network for Yongchang road Longyang district of Baoshan city as an example, the application of SWMM was discussed. Using Chicago rainstorm model to compare the re-sult of pipe section flow calculated by SWMM simulation method with that by runoff coefficient method, adjusting the design pipe diameter, and then, the simulation re-check of the design pipe network was carried out in larger recurrence interval. The results showed that, SWMM model could provide reliable data for the calculation of de-sign rainwater flow;therefore, it could offer new methods for rainwater pipe network design.%以保山市隆阳区永昌路雨水管道设计为例,讨论了SWMM的应用。采用芝加哥暴雨模型,将管段流量的模拟结果与径流系数法比较,对管道的设计管径做出调整。在较大重现期情况下,对设计管网进行模拟复核。结果显示, SWMM模型可以为计算雨水设计流量提供可靠的数据支持。该应用说明SWMM能为雨水管道的设计提供新的方法。

  20. Heat pipe turbine vane cooling

    Energy Technology Data Exchange (ETDEWEB)

    Langston, L.; Faghri, A. [Univ. of Connecticut, Storrs, CT (United States)

    1995-10-01

    The applicability of using heat pipe principles to cool gas turbine vanes is addressed in this beginning program. This innovative concept involves fitting out the vane interior as a heat pipe and extending the vane into an adjacent heat sink, thus transferring the vane incident heat transfer through the heat pipe to heat sink. This design provides an extremely high heat transfer rate and an uniform temperature along the vane due to the internal change of phase of the heat pipe working fluid. Furthermore, this technology can also eliminate hot spots at the vane leading and trailing edges and increase the vane life by preventing thermal fatigue cracking. There is also the possibility of requiring no bleed air from the compressor, and therefore eliminating engine performance losses resulting from the diversion of compressor discharge air. Significant improvement in gas turbine performance can be achieved by using heat pipe technology in place of conventional air cooled vanes. A detailed numerical analysis of a heat pipe vane will be made and an experimental model will be designed in the first year of this new program.

  1. A Design of Alternating Temperature Heat Pipe Adsorber%一种交变式三温区热管吸附床的设计研究

    Institute of Scientific and Technical Information of China (English)

    冯梦娇; 孙文哲; 胡选哲; 顾晓勇; 侯龙

    2015-01-01

    Energy crisis and environmental degradation become the problem that confronted by all over the world. Traditional refrigeration led to the deterioration of environmental problems. Adsorption refrigeration become the subject of the study as it is a green refrigeration technology. Objective discussion of adsorption refrigeration itself, there are still many deficiencies,in order to solve these problems,the combination of heat pipe and its scholars both at home and abroad to develop a series of new type refrigeration units,to a certain extent,and improves the deficiency of the adsorption refrigeration unit performance. At the same time broaden the application field of heat pipe adsorption bed system. This paper mainly introduces a design of alternating temperature heat pipe adsorber,this de-vice combined heat pipe with adsorption refrigeration,complementary advantages. This paper introduces the princi-ple and the system of experiment process, details in this paper, the design of the experimental device compo-nents. Finally we analysis the feasibility of the system and prospect for the future.%能源危机,环境恶化成为全世界共同面对的问题。吸附制冷作为一种绿色环保的制冷技术倍受青睐,成为众学者研究的课题。客观讨论,吸附制冷本身仍存在很多不足之处,为解决这些问题,国内外学者将热管与其结合研制出一系列新型制冷机组,在一定程度上缓解了吸附制冷的不足并提高了机组性能。同时还拓宽了热管吸附床系统的应用领域。本文主要介绍了一种交变式三温区热管吸附床的设计,该装置将热管与吸附制冷结合,优势互补。文中介绍了实验进行的原理及系统流程,详细阐述了实验装置各部件的设计细节。最后分析了其可行性并对其做了展望。

  2. Design and fabrication of polymer-concrete pipe for testing in geothermal-energy processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, J.E.

    1981-07-01

    Polymer concrete is a composite material which has strength and durability characteristics greatly superior to those of portland cement concrete and better durability in hot brine than steel. Polymer concrete has been successfully tested in brine, flashing brine, and steam at temperatures up to 260/sup 0/C (500/sup 0/F). Exposures were as long as 960 days. Glass-filament-wound polymer concrete pipe was developed with excellent strength, low weight, and a cost comparable to or less than Schedule 40 steel. Connections can be made with slip joints for low-pressure applications and flanged joints for high-pressure applications.

  3. Control of low-frequency noise for piping systems via the design of coupled band gap of acoustic metamaterials

    Science.gov (United States)

    Li, Yanfei; Shen, Huijie; Zhang, Linke; Su, Yongsheng; Yu, Dianlong

    2016-07-01

    Acoustic wave propagation and sound transmission in a metamaterial-based piping system with Helmholtz resonator (HR) attached periodically are studied. A transfer matrix method is developed to conduct the investigation. Calculational results show that the introduction of periodic HRs in the piping system could generate a band gap (BG) near the resonant frequency of the HR, such that the bandwidth and the attenuation effect of HR improved notably. Bragg type gaps are also exist in the system due to the systematic periodicity. By plotting the BG as functions of HR parameters, the effect of resonator parameters on the BG behavior, including bandwidth, location and attenuation performance, etc., is examined. It is found that Bragg-type gap would interplay with the resonant-type gap under some special situations, thereby giving rise to a super-wide coupled gap. Further, explicit formulation for BG exact coupling is extracted and some key parameters on modulating the width and the attenuation coefficient of coupled gaps are investigated. The coupled gap can be located to any frequency range as one concerned, thus rendering the low-frequency noise control feasible in a broad band range.

  4. The design of ellipticity of tension reduce pass for steel pipe%钢管张力减径孔型椭圆度的设计

    Institute of Scientific and Technical Information of China (English)

    于俊春

    2001-01-01

    The paper introduced the ellipticity design method of tension reduce pass of Φ89mm welded steel tube unit which imported from German by Chengde Wanli Steel Pipe Co., Ltd. The design based on ellipticity calculation methods of the traditional circular and ellipse pass. The practice shows that the defects, such as inner polygonal of thick tube and folding ear of thin tube, are eliminated%介绍了承德万利钢管有限公司从德国引进的Φ89mm焊管机组张力减径孔型采用了介于传统椭圆孔型和圆孔型椭圆度计算的设计方法。此法消除了厚壁钢管内多边形和薄壁钢管挤入辊缝的缺陷。

  5. Design of Pipe Material around Ionic Membrane Caustic Soda Electrolyzer%离子膜烧碱电解槽附近管道材质的设计

    Institute of Scientific and Technical Information of China (English)

    郅红虹

    2012-01-01

    To assure the long -term stability running properties Of the pipe matefiais around electrolyzer are highly ionic membrane electrolyzer licensors at home and abroad,analyzes their advantages and disadvantages, and it could provide reference for design.%为保证电解槽离子膜的长期稳定运行,电解槽附近的工艺介质管道对材质的耐腐蚀性要求非常高。综合比较了目前国际常用的离子膜电解槽专利厂家的选材及其优缺点,以供设计参考。

  6. 33 CFR 157.11 - Pumping, piping and discharge arrangements.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Pumping, piping and discharge... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.11 Pumping, piping and discharge arrangements. (a) Each tank vessel must have a fixed piping system for transferring oily mixtures from...

  7. 46 CFR 56.50-105 - Low-temperature piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Low-temperature piping. 56.50-105 Section 56.50-105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-105 Low-temperature piping. (a) Class...

  8. 46 CFR 56.50-20 - Pressure relief piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Pressure relief piping. 56.50-20 Section 56.50-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-20 Pressure relief piping. (a)...

  9. 46 CFR 153.283 - Valving for cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Valving for cargo piping. 153.283 Section 153.283... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.283 Valving for cargo piping. (a) Except as described in...

  10. 46 CFR 56.50-85 - Tank-vent piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tank-vent piping. 56.50-85 Section 56.50-85 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-85 Tank-vent piping. (a) This...

  11. 49 CFR 192.193 - Valve installation in plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  12. Critical velocity and dynamic respondency of pipe conveying fluid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Presents the calculation of critical velocity, natural frequencyand dynamic respondency of fluid-conveying pipe are calculated under different boundary conditions using finite element method, and the use of calculation results to design and research rocket pipes feeding fuel and watery turbine pipes conveying water etc.

  13. Automatic Control Design of Rust Removing Device for Pipe End%管端除锈设备自动控制设计

    Institute of Scientific and Technical Information of China (English)

    李建明; 邓志伟; 付雪强; 张世平; 江渊; 魏耀华

    2012-01-01

    In this article, it introduced the structure and functions of a new kind of SAW pipe end rust removing device, and expounded its working principle. At the same time, the full-automatic control technology of rust removing was designed based on SIEMENS S7-200 PLC. The productive practice proved that this automatic control design increased production efficiency, reduced failure rate and work labor cost, avoided unstable factors of manual operation, and realized stable rust removing quality.lt was in favour of HSE field management, and simple maintenance. Meanwhile, it avoided base metal scratch, increased rust removing quality. So it is applicable to widely promote in SAWH pipe industry.%介绍了一种新型螺旋埋弧焊管管端除锈设备的构造和功能,阐述了其工作原理,并基于西门子S7-200 PLC设计了除锈设备的全自动控制工艺.经过实际生产应用证明,管端除锈设备的自动控制设计提高了工作效率,维修、维护方便,故障率降低,更有利于HSE现场管理,避免了人工操作的不稳定因素,降低了劳动力成本,保证了管端除锈质量的稳定,同时,避免了母材划伤,提高了除锈质量,在同行业中具有很好的推广应用价值.

  14. HPFRCC - Extruded Pipes

    DEFF Research Database (Denmark)

    Stang, Henrik; Pedersen, Carsten

    1996-01-01

    as well as structural design. Material development was carried out considering both processing requirements as well as mechanical properties of the hardened material. A micro-mechanical model for the non-linear material behavior of the hardened material based on the stress-crack width or the $\\sigma...... itself. The structural modeling of the pipe was done making direct use of the $\\sigma-w$ material characterization. The processing technique developed is a novel type of extrusion combiningease of material mixing and few requirements for material pre-processingwith a high degree of accuracy and stability...

  15. Experimental investigations on an axial grooved cryogenic heat pipe

    Directory of Open Access Journals (Sweden)

    Senthil Kumar Muniappan

    2012-01-01

    Full Text Available This paper deals with development and studies of a trapezoidal axial grooved nitrogen heat pipe. A special liquid nitrogen cryostat has been designed and developed for evaluating the performance of heat pipe where the condenser portion is connected to the cold sink externally. Experiments have been performed on the heat pipe as well as on an equivalent diameter copper rod at different heat loads. The steady state performance of the heat pipe is compared with that of copper rod.

  16. Modelling the performance of the tapered artery heat pipe design for use in the radiator of the solar dynamic power system of the NASA Space Station

    Science.gov (United States)

    Evans, Austin Lewis

    1988-01-01

    The paper presents a computer program developed to model the steady-state performance of the tapered artery heat pipe for use in the radiator of the solar dynamic power system of the NASA Space Station. The program solves six governing equations to ascertain which one is limiting the maximum heat transfer rate of the heat pipe. The present model appeared to be slightly better than the LTV model in matching the 1-g data for the standard 15-ft test heat pipe.

  17. Reusable pipe flange covers

    Energy Technology Data Exchange (ETDEWEB)

    Holden, James Elliott (Simpsonville, SC); Perez, Julieta (Houston, TX)

    2001-01-01

    A molded, flexible pipe flange cover for temporarily covering a pipe flange and a pipe opening includes a substantially round center portion having a peripheral skirt portion depending from the center portion, the center portion adapted to engage a front side of the pipe flange and to seal the pipe opening. The peripheral skirt portion is formed to include a plurality of circumferentially spaced tabs, wherein free ends of the flexible tabs are formed with respective through passages adapted to receive a drawstring for pulling the tabs together on a back side of the pipe flange.

  18. Multiple blowdown pipe experiments with the PPOOLEX facility

    Energy Technology Data Exchange (ETDEWEB)

    Puustinen, M.; Laine, J.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-03-15

    This report summarizes the results of the experiments with two steel blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through the blowdown pipes to the condensation pool. The main purpose of the experiment series was to study chugging phenomena (rapid condensation) while steam is discharged through two parallel blowdown pipes into the condensation pool filled with sub-cooled water. Particularly, the aim was to study if the pipe material (polycarbonate) used in the earlier experiment series with two blowdown pipes has had an effect on the general chugging behaviour and measured loads. In the experiments the initial temperature of the pool water was 20 deg. C. The steam flow rate ranged from 220 g/s to 2 350 g/s and the temperature of incoming steam from 148 deg. C to 207 deg. C. The formation and collapse of steam bubbles and the movement of the steam/water interface inside the pipes was non-synchronous. There could be even a 70 ms time difference between the occurrences of steam bubble collapses at the outlets of the two pipes. There was no clear pattern in which pipe the steam bubble first starts to collapse. Several successive bubbles could collapse first in either pipe but then the order changed for a single or several cycles. High pressure loads were measured inside the blowdown pipes due to rapid condensation of the steam volumes in the pipes and resulting water hammer effects. The loads seemed to be higher in pipe 1 than in pipe 2. An explanation for this could be a possible unequal distribution of steam flow between the two pipes. The pipe material has an effect on the condensation phenomena inside the blowdown pipes. A huge difference in the measured pressure curves inside the pipes could be observed compared to the experiments with the polycarbonate pipes. With the same test conditions the amplitude of the

  19. BEAM PIPE IS INSTALLED

    CERN Multimedia

    The installation of the central section of the beam pipe into the heart of the  CMS was completed by 23 April. All the beam pipe elements have been successfully vacuum-tested and the bakeout started.  

  20. Heat pipe testing program test plan

    Energy Technology Data Exchange (ETDEWEB)

    Bienert, W.B.

    1980-03-14

    A test plan is given which describes the tests to be conducted on several typical solar receiver heat pipes. The hardware to be used, test fixtures and rationale of the test program are discussed. The program objective is to perform life testing under simulated receiver conditions, and to conduct performance tests with selected heat pipes to further map their performance, particularly with regard to their transient behavior. Performance requirements are defined. Test fixtures designed for the program are described in detail, and their capabilities for simulating the receiver conditions and their limitations are discussed. The heat pipe design is given. (LEW)

  1. Reliability Estimation for Double Containment Piping

    Energy Technology Data Exchange (ETDEWEB)

    L. Cadwallader; T. Pinna

    2012-08-01

    Double walled or double containment piping is considered for use in the ITER international project and other next-generation fusion device designs to provide an extra barrier for tritium gas and other radioactive materials. The extra barrier improves confinement of these materials and enhances safety of the facility. This paper describes some of the design challenges in designing double containment piping systems. There is also a brief review of a few operating experiences of double walled piping used with hazardous chemicals in different industries. This paper recommends approaches for the reliability analyst to use to quantify leakage from a double containment piping system in conceptual and more advanced designs. The paper also cites quantitative data that can be used to support such reliability analyses.

  2. Additive Manufacturing of Heat Pipe Wicks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wick properties are often the limiting factor in a heat pipe design. Current technology uses conventional sintering of metal powders, screen wick, or grooves to...

  3. 49 CFR 192.107 - Yield strength (S) for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Yield strength (S) for steel pipe. 192.107 Section... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.107 Yield strength (S) for steel pipe. (a) For pipe that is manufactured in accordance with a specification listed in...

  4. 49 CFR 192.109 - Nominal wall thickness (t) for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Nominal wall thickness (t) for steel pipe. 192.109... TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.109 Nominal wall thickness (t) for steel pipe. (a) If the nominal wall thickness for steel pipe is not known...

  5. 46 CFR 56.50-25 - Safety and relief valve escape piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Safety and relief valve escape piping. 56.50-25 Section 56.50-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-25 Safety and relief valve escape piping. (a) Escape piping...

  6. 49 CFR 192.175 - Pipe-type and bottle-type holders.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Pipe-type and bottle-type holders. 192.175 Section....175 Pipe-type and bottle-type holders. (a) Each pipe-type and bottle-type holder must be designed so as to prevent the accumulation of liquids in the holder, in connecting pipe, or in...

  7. Acoustic Signal Processing for Pipe Condition Assessment (WaterRF Report 4360)

    Science.gov (United States)

    Unique to prestressed concrete cylinder pipe (PCCP), individual wire breaks create an excitation in the pipe wall that may vary in response to the remaining compression of the pipe core. This project was designed to improve acoustic signal processing for pipe condition assessment...

  8. Design of Mobile Robot System for Pipe Trench Inspection in Nuclear Industry%移动式在役核管沟检测机器人系统的设计

    Institute of Scientific and Technical Information of China (English)

    周益路; 颜国正; 王志武; 高鹏; 刘华; 姜萍萍

    2011-01-01

    针对核设施的安全检测,研制了适用于核工业在役管沟检测的移动式机器人系统.该系统由机器人本体、控制系统、图像采集系统等组成,在核工业在役管沟中的现场检测结果表明,该系统在一般的核污染环境下可正常工作,且能有效保障现场人员的安全;对于环境不明且存在隐患的管沟,采用移动式机器人检测能尽快排除隐患,这也是目前实现在役管沟检测的最有效途径之一;检测数据将为核工业在役管沟的整改以及下一代管沟的设计提供重要依据.%For the safety inspection of nuclear facilities, a mobile robot system was developed to examine the inuse pipe trench in nuclear industry. The system consists of robot, control system and image acquisition system.The inspection results of in-use pipe trench in nuclear industry show that this system can work normally under general nuclear contamination, and can also protect the related workers efficiently. For the pipe trench with unknown situation and latent danger, mobile robot's inspection can eliminate danger as soon as possible, which is regarded as one of the most efficient ways of examining in-use pipe trench. The inspection would provide critical reference not only for the rectification of pipe trench, but also for the design of the future generation of pipe trench.

  9. Design of a micro-robot with an electro-pneumatic servo-actuator for the intra-pipe inspection; Conception d'un micro robot a actionneur asservi electropneumatique pour l'inspection intratubulaire

    Energy Technology Data Exchange (ETDEWEB)

    Anthierens, C

    1999-12-01

    Micro Electro Mechanical Systems (MEMS) are integrated in many current products and are not only the concern of military defence or medicine. Nowadays micro actuators are diversified by using different kind of energy, and creating different motions. Several applications require small systems to inspect confined and hostile places. Vapour generators in nuclear plants are composed with 3000 to 5000 vertical pipes of 17 mm diameter. These pipes endure high mechanical constraints and have to be inspected to detect eventual cracks. Our study is based on the design, modelling and implementation of a micro-robot enable to move up and carry sensors in these pipes. It moves as an inchworm and then is composed by 2 blocking modules that brace the robot on the pipe sides, and one stretching module that creates a step. This actuator is pneumatic and composed by metal bellows. By this original design, the micro-robot have a good power to volume ratio and thus it can carry a load higher than 1 kg. Its good positioning accuracy is proved with a 90 mm course where the error of positioning is less than 60{mu}m. A PID control law is used to control the robot but state feed back control law is planed. (author)

  10. Design Points for the Equipment and Piping Arrangement of Flammable Liquid Tank Farm%可燃液体罐区设备及管道布置设计要点

    Institute of Scientific and Technical Information of China (English)

    张慧

    2015-01-01

    可燃液体罐区是化工装置不可或缺的重要设施,其设备选型、管道布置等在设计上是有较高要求的,正确的设备及管道布置对罐区起着至关重要的安全保障作用。本文以甲醇为例,介绍了可燃液体储罐的设计选型、容量确定、设备布置及与之相通管道的设计要点,可为今后的可燃液体储罐的相关设计提供参考与借鉴。%Flammable liquid tank farm is an indispensable facility in chemical devices. Equipment selection, piping arrangement etc. have to meet higher requirements. Correct equipment and piping arrangement play an important guarantee role in the safety of the farm. In this paper, the methanol plant was introduced as an example for the design of unit mode selection, capacity determination, equipment arrangement and piping arrangement. This will offer some references for the design of the equipment and piping arrangement in the flammable liquid tank farm.

  11. Design of Hydraulic System for Embedded Double Pipes Amphibious Crane%内嵌双输油管两用起重机液压系统设计

    Institute of Scientific and Technical Information of China (English)

    卢志珍; 倪学虎; 舒希勇; 王成龙

    2012-01-01

    Based on analyzing requirements of embedded double pipes amphibious crane to hydraulic system, the hydraulic system design thinking was put forward according to crane technical parameters and customers requirements. Calculations and type selections of the key hydraulic components; hydraulic pump and hydraulic motor, hydraulic cylinder, were completed. The hydraulic principle diagram was designed and the work principle of the hydraulic loop was expounded.%在分析内嵌双输油管两用起重机对液压系统要求的基础上,针对起重机技术参数及客户要求提出了液压系统设计的思路,对关键液压元件——液压泵、液压马达、液压缸进行了计算选型,给出了液压原理图,并阐述了起重机液压回路的工作原理.

  12. Numerical study of heat pipe application in heat recovery systems

    Energy Technology Data Exchange (ETDEWEB)

    Song Lin; Broadbent, John; McGlen, Ryan [Thermacore Europe, Ashington (United Kingdom)

    2005-01-01

    Heat pipes are two-phase heat transfer devices with extremely high effective thermal conductivity. They can be cylindrical or planar in structure. Heat pipes can be embedded in a metal cooling plate, which is attached to the heat source, and can also be assembled with a fin stack for fluid heat transfer. Due to the high heat transport capacity, heat exchangers with heat pipes have become much smaller than traditional heat exchangers in handling high heat fluxes. With the working fluid in a heat pipe, heat can be absorbed on the evaporator region and transported to the condenser region where the vapour condenses releasing the heat to the cooling media. Heat pipe technology has found increasing applications in enhancing the thermal performance of heat exchangers in microelectronics, energy and other industrial sectors. Utilisation of a heat pipe fin stack in the drying cycle of domestic appliances for heat recovery may lead to a significant energy saving in the domestic sector. However, the design of the heat pipe heat exchanger will meet a number of challenges. This paper presents a design method by using CFD simulation of the dehumidification process with heat pipe heat exchangers. The strategies of simulating the process with heat pipes are presented. The calculated results show that the method can be further used to optimise the design of the heat pipe fin stack. The study suggests that CFD modelling is able to predict thermal performance of the dehumidification solution with heat pipe heat exchangers. (Author)

  13. Proposal of a Self-baking Single-wall Design for the VI Section of the ATLAS Beam Pipe

    CERN Document Server

    Marco Olcese, MO

    2002-01-01

    A single-wall design for the VI section of the ATLAS beam vacuum chamber is presented. This design would allow for a major cost saving with respect to the current double-wall baseline. All the thermal implications and impact on the B-layer mudules are discussed.

  14. Impedance modelling of pipes

    Science.gov (United States)

    Creasy, M. Austin

    2016-03-01

    Impedance models of pipes can be used to estimate resonant frequencies of standing waves and model acoustic pressure of closed and open ended pipes. Modelling a pipe with impedance methods allows additional variations to the pipe to be included in the overall model as a system. Therefore an actuator can be attached and used to drive the system and the impedance model is able to include the dynamics of the actuator. Exciting the pipe system with a chirp signal allows resonant frequencies to be measured in both the time and frequency domain. The measurements in the time domain are beneficial for introducing undergraduates to resonances without needing an understanding of fast Fourier transforms. This paper also discusses resonant frequencies in open ended pipes and how numerous texts incorrectly approximate the resonant frequencies for this specific pipe system.

  15. The design of thermal pipe monitoring software based on GPRS%基于GPRS的热力管网监测软件设计

    Institute of Scientific and Technical Information of China (English)

    陈萍; 高腾; 刘兆峰; 高雪为; 詹鹏飞

    2011-01-01

    GPRS (General Packet Radio Service) is a mature commercial wireless communication technique. Its lower cost than other wireless communications (such as 3G) and high transmission rate make it have a good prospect for the application in the wireless monitoring & administration system. The methods for the design of the thermal pipes monitoring software base on GPRS has been put forward in this paper. The overall structure of the monitoring system, flow diagram of software design and some programs are given. Especially, the design adopts GPRS TCP/IP protocol to communicate, using the Winsock control in VB environment to achieve data receiving and Access database for management. The feasibility of this design is proved well by field applications.%通用分组无线业务GPRS技术作为一种成熟的商用无线通信技术,在无线监测管理系统中因其费用较其他无线传输(如3G技术)低,且传输速率高,而有着很好的应用前景.文章提出了基于GPRS的热力管网监测软件设计的方法,包括热力管网监测系统的总体结构图、具体的软件设计流程图以及部分程序,其中:设计的通讯部分主要采用基于GPRS的TCP/IP协议来实现,数据的接收是采用VB环境中的Winsock控件来实现;设计利用Access数据库对该监测系统的数据进行管理,其可行性通过现场使用得到了充分验证.

  16. The comprehensive pipe gallery design of Wenli avenue extension line in Hainan test area%海南试验区文黎大道延伸线综合管廊设计

    Institute of Scientific and Technical Information of China (English)

    杨湖平

    2015-01-01

    以海南国际旅游岛先行试验区文黎大道延伸线项目为例,重点介绍了综合管廊纳入管线的选择,管廊设计标准的选取,对浅埋式盖板沟结构综合管廊的横断面设计、平面布置、纵断面设计、各种节点设计、附属工程设计等作了详细阐述,提出了此类综合管廊管理意见。%Taking the Wenli avenue extension line project in Hainan international tourism island pilot test district as an example,this paper em-phatically introduced the comprehensive pipe gallery into pipeline selection,pipe gallery design criteria selection,elaborated in detail the cross-sectional design,plane layout,vertical section design,all kinds of nodes design,affiliated engineering design etc. of shallow buried type trench cover structure,put forward such comprehensive pipe gallery management advices.

  17. Development of Submersible Corrugated Pipe Sewage Heat Exchanger

    Institute of Scientific and Technical Information of China (English)

    BAI Li; SHI Yan; TAN Yu-fei

    2009-01-01

    Based on the characteristics of heat transfer for corrugated pipe,a method of calculating and de-sign on the submersible corrugated pipe sewage heat exchanger was put forward theoretically and experimental-ly.The actual movement parameters of air-conditioning system used in this heat exchanger were measured.The experimental result shows that the quantity of heat transfer of the corrugated pipe sewage heat exchanger can satisfy the building's load with the average coefficient of performance 4.55.At the same time.the quantity ot heat transfer of the corrugated pipe sewage heat exchanger was compared with that of the other nonmetallic sewage heat exchangers(i.e.,the plastic-Al pipe sewage heat exchanger and PP-R pipe sewage heat exchanger)experimentally.It is found out that the effect of heat transfer for submersible corrugated pipe sewage heat ex-changer is superior to those of the plastic-Al pipe and the PP-R pipe.The quantity of heat transfer per mile of corrugated pipe sewage heat exchanger is 5.2 times as much as that of the plastic-Al pipe,and it is 8.1 times as much as that of PP-R pipe.

  18. 报纸信函文件气力管道输送装置的设计%Newspaper letter file pneumatic pipe device design

    Institute of Scientific and Technical Information of China (English)

    刘长生

    2011-01-01

    In view of the fact that current post offices processed clients'newspapers, letters and documents only to u-nit's mailroom, then the worker of the mailroom sorted and sent them artificially, the course of delivery and efficiency cannot satisfy the requirements of high speed and high efficiency. At a angle of pneumatic transmission, by using the pipeline pneumatic handling installment to send the mails and the programming to realize the automatic control, a pneumatic pipe delivery system was designed. It can realize effective delivery of mails between sections of unit.%针对当前邮电局对许多单位的报纸信函文件仅送至单位的收发室,然后由收发室分拣后再用人工传达,不能快速高效地满足工作需要的现状.从气力输送角度出发,对收发室分拣后的报纸文件采用管道气力输送装置,并采用编程实现自动控制,完全可以高效地在本单位各部门之间的送达.

  19. THEORETICAL ANALYSIS OF ICE-ON-PIPE THERMAL STORGAE APPARATUS DESIGN%盘管式储冰装置设计的理论分析

    Institute of Scientific and Technical Information of China (English)

    叶水泉; 董兴杰; 叶招发; 陈国邦; 邱利民

    2001-01-01

    A heat-transfer model for ice-on-pipe thermal storage apparatus was established and the curve of the glycol temperature,the ice thickness and ice thermal storgae rates & totals vs.time was obtained when the chiller keeps full load in practical project.It is benefit to design and control of ice-thermal storage apparatus.%建立了盘管式储冰装置的传热模型,得出了实际工程中保持机组满负荷运行工况下乙二醇进出储冰槽温度的变化曲线、盘管上冰的厚度随时间的变化曲线以及储冰槽逐时储冷量与总储冷量随时间的变化曲线。认为这一探讨有益于冰储冷装置的设计和系统的控制运行。

  20. Heating of drinking water in floors. New design rules for drinking water pipes; Opwarming drinkwater in vloeren lastig probleem. Nieuwe ontwerpregels voor drinkwaterleidingen

    Energy Technology Data Exchange (ETDEWEB)

    Scheffer, W. [UNETO-VNI, Zoetermeer (Netherlands); Van Wolferen, H. [TNO, Apeldoorn (Netherlands)

    2007-04-15

    Insight is given in the new rules for the construction and installation of tap water pipes in floors and the possible consequences of heating the water in such pipes. [Dutch] De aanleg van waterleidingen in de constructievloer van woningen lijkt niet langer meer een optie. De regels voor de aanleg worden dusdanig verscherpt dat de huidige installatiepraktijk aangepast moet worden. Wat zijn de achtergronden van de nieuwe regels en wat zijn de gevolgen voor het ontwerp.

  1. Heat pipes for spacecraft temperature control: Their usefulness and limitations

    Science.gov (United States)

    Ollendorf, S.; Stipandic, E.

    1972-01-01

    Heat pipes are used in spacecraft to equalize the temperature of structures and maintain temperature control of electronic components. Information is provided for a designer on: (1) a typical mounting technique, (2) choices available in wick geometries and fluids, (3) tests involved in flight-qualifying the design, and (4) heat pipe limitations. An evaluation of several heat pipe designs showed that the behavior of heat pipes at room temperature does not necessarily correlate with the classic equations used to predict their performance. They are sensitive to such parameters as temperature, fluid inventory, orientation, and noncondensable gases.

  2. 化工装置中防范管道水击设计的研究%Research on Design against Pipe Water Hammer in Chemical Unit

    Institute of Scientific and Technical Information of China (English)

    董新

    2016-01-01

    从化工装置中管道内气-液两相混合流动的状态入手,综合分析了蒸汽管道、凝结水回收管道、气-液两相流管道产生水击的过程,并结合具体的工程实例,指出了水击现象是由管道内的介质冷热混合不均形成气-液两相造成的,并提出了管道水击的预防和消除措施。%Beginning from the flowing status of mixed gas and liquid in pipe of chemical unit, this paper analyzes the process in which water hammer oc ̄curs in steam pipe, condensate recovery pipe and two ̄phase gas ̄liquid pipe. It also sheds light on the reasons for water hammering in the pipe of chemical unit based on specific engineering example, and it puts forward measures for preventing and eliminating pipe water hammer.

  3. Heat transfer, thermal control, and heat pipes

    Science.gov (United States)

    Olstad, W. B.

    1980-01-01

    This volume provides information on recent progress in spacecraft thermal control and the supporting disciplines of conduction, thermal radiation, and heat pipe theory and application. Four problem areas are considered: conduction heat transfer, radiation heat transfer, thermal control, and heat pipes. The topics covered include finite-element methodology for transient conduction/forced-convection thermal analysis; effects of surface finish on thermal contact resistance between different materials; mathematical models for wide-band nongray gas radiation in spherical and cylindrical geometries; thermal design, analysis and testing of the Shuttle remote manipulator arm; porous heat pipe; and transient behavior of liquid trap heat-pipe thermal diodes. Also discussed is the thermal design concept for a high-resolution UV spectrometer.

  4. Burst limit state reliability for fiber-wrapped steel pipe

    Energy Technology Data Exchange (ETDEWEB)

    Dann, Markus R. [University of Calgary (Canada); Maes, Marc A. [Blade Energy Partners Ltd. (Canada); Salama, Mamdouh M. [ConocoPhillips Company (United States)

    2010-07-01

    In the oil and gas sector, due to the increase in demand, pipeline projects are being developed in remote areas with harsh environments. High strength steel pipelines have been developed but due to their high cost and to low production capacity, the focus is now on dry fiber augmented steel technology pipelines (FAST-Pipe). The aim of this paper is to present a probabilistic mechanical burst limit state for such fiber wrapped pipelines. This model has been developed based on a large strain Cauchy stress formulation and has been used to perform a reliability comparison between an X80 pipe and an X70 FAST-Pipe. Results showed that the FAST-Pipe has more uncertainties than the high strength steel pipe and thus lower factors should be used in their design. This paper provided a probabilistic limit state model which can be used for both steel pipes and FAST-Pipe.

  5. 压力管道的柔性设计及弹簧支吊架选用%The Flexible Design of Pressure Piping and Application of Spring Supports and Hangers

    Institute of Scientific and Technical Information of China (English)

    刘龙

    2015-01-01

    概述了压力管道柔性设计的目的与方法。重点介绍弹簧支吊架的选用,及安装中需注意的问题。%The purposes and methods of pressure piping flexible design are intruduced .focusing on the selection of spring supports and hangers, and the matters need to be payed attention in the installation .

  6. Update of foundation design modifications of data cables and piping in nuclear power plants in operation; Actualizacion de modificaciones de sieno de bases de datos de cables y conducciones en centrales nucleares en operacion

    Energy Technology Data Exchange (ETDEWEB)

    Perez Pereira, J.

    2013-07-01

    The scope of this application is the manage the life cycle of cables electrical and pipes of cables in Trillo NPP. The application is integrated in a configuration Control system, so both cables and conduits become elements of configuration and management of life and history associated with the of the relevant modifying documents. The guarantees criteria of physical separation of wires for jobs and for independent networks designed according to the redundancy of the Central System.

  7. Research on Narrowing Design and Algorithm of the Inlet Scoop of Transition Pipe%对过渡管吸风口宽改窄设计与算法的研究

    Institute of Scientific and Technical Information of China (English)

    张士成; 蔡汉忠; 张玮瑜; 赵喜成; 王刚

    2009-01-01

    针对板厂宽吸风口在阻力计算中存在的问题进行深入的分析研究,结果发现:在圆管和矩形风口相接的过渡管中,流体从矩形风口的轴线对称形进入到扁形的过渡管中,流体是在两个互相垂直的平面内变形,即在一个平面内收缩,在另一个平面内扩散,在这种复杂的流动中反映出渐缩管与渐扩管内的气流脱离管壁的固有效应将导致增大压力损失.另外发现在传统的刨花板横截锯宽吸风口的设计中流量大、压力损失大和污染大,将固定式宽吸风口改为移动式窄吸风口后,这些问题都大大减少,其经济效益和社会效果均良好.%Aiming at the problem existing in resistance calculating of wide inlet scoop in board plant, further research was carried out. The results showed that in the transition pipe that connected circle pipe and rectangle pipe, the fluid enterd the flat transition pipe with the pattern of symmetric axis from rectangle tuyere and distorted in the two mutually perpendicular planes, shrinking in one plane, diffusing in the other. In this complicated floating, the inherent effect of airflow distracting from pipe wall in shrinking pipe and diffusing pipe was reflected, which would lead to increased pressure loss. In addition, the traditional design of wide inlet scoop of partideboard cross-cut saw resulted in large flux, big pressttre loss and severe pollution, however, after turned from fixed wide inlet scoop to mobile narrow inlet scoop, the three indexes above-mentioned were improved greatly with good economic and social benefits.

  8. Cooling Acoustic Transcucer with Heat Pipes

    Science.gov (United States)

    2009-07-19

    pipes. [0013] Most transducer packages involve a stack of active ceramic. A Tonpilz transducer 10 in the prior art, as depicted in FIG. 1...identical or corresponding parts throughout the several views and wherein: [0023] FIG. 1 is a prior art depiction of a Tonpilz transducer design...Distribution is unlimited 20090916027 Attorney Docket No. 97001 COOLING ACOUSTIC TRANSDUCER WITH HEAT PIPES STATEMENT OF GOVERNMENT INTEREST [0001

  9. Research of Spined Heat-Exchanging Pipes

    Directory of Open Access Journals (Sweden)

    Akulov Kirill

    2016-01-01

    Full Text Available Work is devoted to a research of spined heat-exchanging pipes that are assumed to use in air-cooler exchangers (ACE. The proposed new geometry of finning allows intensifying heat exchange and improving the efficiency of air coolers. It is caused by the increased area of finned surface with a value of finning ratio (the ratio of the area of the smooth pipe to a finned one to 42.7, while in the commercially available ACE, the figure is 22. Besides, the geometrical arrangement of the pin fins turbulizes the airflow. It should be mentioned that an easier method of manufacturing of heat exchanging pipes is proposed to use, which will reduce their costs. The proposed heat exchange pipes are made by winding cut aluminum strip to the supporting pipe or stretching stamped blanks on it. To increase the efficiency of the heat exchange surface pin fins should be as thin and long as possible; however, their strength should be sufficient for deformation-free operation. Fins should be staggered to maximize the distance between them. Spined heat-exchange pipes are designed to operate in a commercially produced ACE and their service is carried out similarly to commercially produced transversely finned pipes.

  10. Heat Pipe Materials Compatibility

    Science.gov (United States)

    Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

    1976-01-01

    An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes.

  11. Heat Pipe Planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2014-01-01

    When volcanism dominates heat transport, a terrestrial body enters a heat-pipe mode, in which hot magma moves through the lithosphere in narrow channels. Even at high heat flow, a heat-pipe planet develops a thick, cold, downwards-advecting lithosphere dominated by (ultra-)mafic flows and contractional deformation at the surface. Heat-pipes are an important feature of terrestrial planets at high heat flow, as illustrated by Io. Evidence for their operation early in Earth's history suggests that all terrestrial bodies should experience an episode of heat-pipe cooling early in their histories.

  12. Study of fatigue behavior of longitudinal welded pipes

    Science.gov (United States)

    Simion, P.; Dia, V.; Istrate, B.; Hrituleac, G.; Hrituleac, I.; Munteanu, C.

    2016-08-01

    During transport and storage of the various fluids, welded pipes are subjected to cyclic loading due to pressure fluctuations that often exceed the prescribed values for normal operation. These cyclic loading can significantly reduce the life of the pipes; as a result the design should be based on the fatigue strength not only on static resistance. In general the fatigue strength of pipes is dependent by strength, pipe geometry and surface quality. In case of the electric longitudinal welded pipes, the fatigue strength is significantly limited by concentration of residual stress and the size of existing defects in the weld seam. This paper presents the fatigue behaviour of the electric welded pipes by high frequency, under conditions that simulate real operating conditions pipes. Fatigue testing was performed on welded pipes made of micro alloyed carbon steels. Some of these pipes were previously subjected to a heat treatment of normalization, in order to also determine the influence of heat treatment on the fatigue strength of welded pipes. To determine and correlate the different factors affecting the fatigue strength, welded pipes were also subjected to various tests: tensile tests, impact tests, measurement of micro hardness, microstructural analysis by optical microscopy and scanning electron microscopy.

  13. 安哥拉地区钢管桩停锤标准设计与实践%Design and Practice of Ceasing driving Standard for Steel Pipe Piles in Angola

    Institute of Scientific and Technical Information of China (English)

    于云山; 孟晓宁

    2014-01-01

    本文简要介绍安哥拉罗安达港钢管桩打桩停锤标准制定及其在施工过程中的实践应用,对该地区钢管桩设计施工过程中遇到的停锤标准问题进行初步探讨。%It is introduced briefly the establishment of ceasing driving standard for steel pipe piles in Luanda harbor of Angola and its application in the construction. And a preliminary research is carried out for the ceasing driving standard of steel pipe piles in the design and the construction.

  14. In-Orbit Construction with a Helical Seam Pipe Mill

    Science.gov (United States)

    Gilhooley, N.

    The challenges of building large structures in space, and in particular a torus habitat, require novel processes. One potential method is to manufacture helical seam (also called spiral) pipe in orbit using a pipe mill. These machines turn rolls of steel or alloy into fully formed, welded and inspected pipe, pressure vessels and silos of various diameters. Pipe mills are highly automated and efficient in a factory environment and are increasingly being used for in-situ repair. By constructing in-orbit (on-orbit assembly) the launch vehicle can supply full payloads of compact, robust rolls of material; and the installation design is less restricted by fairing constraints and modular limitations. The use of a pipe mill is discussed as a possible construction method, for comparison an example design envelope is shown and further pipe mill products are considered.

  15. Development of a jet pump-assisted arterial heat pipe

    Science.gov (United States)

    Bienert, W. B.; Ducao, A. S.; Trimmer, D. S.

    1977-01-01

    The development of a jet pump assisted arterial heat pipe is described. The concept utilizes a built-in capillary driven jet pump to remove vapor and gas from the artery and to prime it. The continuous pumping action also prevents depriming during operation of the heat pipe. The concept is applicable to fixed conductance and gas loaded variable conductance heat pipes. A theoretical model for the jet pump assisted arterial heat pipe is presented. The model was used to design a prototype for laboratory demonstration. The 1.2 m long heat pipe was designed to transport 500 watts and to prime at an adverse elevation of up to 1.3 cm. The test results were in good agreement with the theoretical predictions. The heat pipe carried as much as 540 watts and was able to prime up to 1.9 cm. Introduction of a considerable amount of noncondensible gas had no adverse effect on the priming capability.

  16. Explosive welding of pipes

    Energy Technology Data Exchange (ETDEWEB)

    Drennov, O.; Burtseva, O.; Kitin, A. [Russian Federal Nuclear Center, Sarov (Russian Federation)

    2006-08-15

    Arrangement of pipelines for the transportation of oil and gas is a complicated problem. In this paper it is suggested to use the explosive welding method to weld pipes together. This method is rather new. This method can be advantageous (saving material and physical resources) comparing to its static analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. We suggest to perform explosive welding according to the following scheme: the ends of the 2 pipes are connected, the external surfaces are kept at a similar level. A cylindrical steel layer of diameter larger than the pipe diameter is set around the pipe joint and an explosive charge is placed on its external surface. The basic problem is the elimination of strains and reduction of pipe diameter in the area of the dynamic effect. The suggestion is to use water as filler: the volume of pipes in the area adjacent to the zone of explosive welding is totally filled with water. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gas dynamic and elastic-plastic calculations we determined non-deformed mass of water. Model experiments with pipes having radii R = 57 mm confirmed results of the calculations and the possibility in principle to weld pipes by explosion with use of water as filler.

  17. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...

  18. A heat pipe

    Energy Technology Data Exchange (ETDEWEB)

    Rachev, L.A.; Kravtsov, A.A.

    1979-02-08

    A thermal pipe is described which contains a hermetically sealed body with a reticular filler. In order to increase the transmitted thermal power, the pipe is equipped with a high voltage source and with insulators, located between the wall of the body and the filler, where the latter is switched in to the high voltage source, preferably an adjustable one.

  19. 埋弧焊管高速焊接工艺设计及生产应用%Design and Application of High Speed Welding Procedure for Submerged Arc Welded(SAW) Pipes

    Institute of Scientific and Technical Information of China (English)

    曹红平; 唐子金; 彭新星; 杨雄英

    2014-01-01

    Aim at the need of SAW pipe production, under the premise of ensuring the weld quality and production efficiency, the mathematical model of function relation among welding wire deposition, welding penetration, welding current, arc voltage and welding speed was set. The welding parameter of SAW pipe was designed under different welding speed, and was applied in production. Through comparison of weld performance and production efficiency of SAWH pipe with the same specification under different welding speed, the result showed that the design method and the determined parameters of high-speed welding process are reasonable. The pipe quality is stable after increasing speed, and the output can be increased by 20%.%针对埋弧焊管生产需要,在兼顾焊缝质量要求和生产效率的前提下,研究构建了焊丝熔敷量、焊接熔透量与焊接电流、电弧电压和焊接速度的函数关系数学模型,对埋弧焊管在不同焊接速度下的焊接工艺参数进行设计,并在实际生产中进行应用。通过同规格螺旋埋弧焊管在不同焊接速度下的焊缝性能及生产效率对比,表明研究的高速焊接工艺设计方法和所确定的参数是合理的,提速后焊管质量稳定,并可增产20%。

  20. Oscillating heat pipes

    CERN Document Server

    Ma, Hongbin

    2015-01-01

    This book presents the fundamental fluid flow and heat transfer principles occurring in oscillating heat pipes and also provides updated developments and recent innovations in research and applications of heat pipes. Starting with fundamental presentation of heat pipes, the focus is on oscillating motions and its heat transfer enhancement in a two-phase heat transfer system. The book covers thermodynamic analysis, interfacial phenomenon, thin film evaporation,  theoretical models of oscillating motion and heat transfer of single phase and two-phase flows, primary  factors affecting oscillating motions and heat transfer,  neutron imaging study of oscillating motions in an oscillating heat pipes, and nanofluid’s effect on the heat transfer performance in oscillating heat pipes.  The importance of thermally-excited oscillating motion combined with phase change heat transfer to a wide variety of applications is emphasized. This book is an essential resource and learning tool for senior undergraduate, gradua...

  1. The monster sound pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-03-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which illustrates how an Internet keyboard can be used to estimate the fundamental pitches of each pipe. Since both pipes have similar end corrections, the pitch discrepancy between the smooth pipe and drainage tube is due to the corrugations, which lower the speed of sound inside the flexible tube, dropping its pitch a semitone.

  2. 基于风险分析法的排水排涝暴雨重现期转换关系%Risk probability analysis of design storm combination of urban pipe drainage and river drainage

    Institute of Scientific and Technical Information of China (English)

    杨星; 李朝方; 刘志龙

    2012-01-01

    According to the urban planning plan of China, municipal department takes charge of pipe drainage planning and water resources department takes charge of river drainage planning. Because there is a difference of sampling methods of storm data and different regulation , the design standard of urban pipe drainage is usually not in accord with that of river drainage, which produce the problem about the combination design of pipe drainage and river drainage. There is a different safety because of different combination values of pipe drainage and river drainage; and this safety can be indicated by risk probability. Based on these descriptions, the calculation model was built to analyse risk probability on design storm combination of urban pipe drainage and river drainage and to guide the combination design of urban pipe drainage and river drainage. Finally, taking the rainfall data in Shenzhen City as one research object, the ease study of risk probability of the combination design was conducted, which could provide evidence on the rational selection for the design storm combination of urban pipe drainage and river drainage.%按目前国内的城市规划体制,市政部门负责管道排水规划,水利部门负责河道排涝规划,两者采用的暴雨资料统计方法不同导致了设计标准的差异,所以城市管道排水和河道排涝存在组合设计的问题.组合值不同,安全度也不一样,当设计暴雨取值满足河道排涝设计安全条件时,组合的排水设计标准越高,相应的组合安全性越大,组合的排水设计标准越低,则相应的组合安全性越小,这种组合设计的安全性可以用风险率表示.为此,构建了管道排水和河道排涝组合风险计算模型,并依据其组合风险率提出管道排水和河道排涝组合设计方法.考虑到各地水文特征的差异性,以深圳市为特例对这种方法进行了分析,为城市管道排水和河道排涝的组合设计提供科学依据.

  3. Robotic platform for traveling on vertical piping network

    Science.gov (United States)

    Nance, Thomas A; Vrettos, Nick J; Krementz, Daniel; Marzolf, Athneal D

    2015-02-03

    This invention relates generally to robotic systems and is specifically designed for a robotic system that can navigate vertical pipes within a waste tank or similar environment. The robotic system allows a process for sampling, cleaning, inspecting and removing waste around vertical pipes by supplying a robotic platform that uses the vertical pipes to support and navigate the platform above waste material contained in the tank.

  4. Surface Hardness of Friction Stir Welded AA6063 Pipe

    OpenAIRE

    Ismail Azman; Awang Mokhtar

    2014-01-01

    The external surface hardness of friction stir welded aluminum alloy 6063 pipe joint was investigated in this paper. The 89mm of outside diameter pipe with 5mm of wall thickness was used as test pipe piece for this experiment on closed butt joint configuration by utilising Bridgeport 2216 CNC milling machine and orbital clamping unit specially designed to cater for this task and function. Several welded samples were produced on varying process parameters which were successfully joined by usin...

  5. Innovative Design of Gear System for Mobile Pipe Thread Forming Machines%可移式管螺纹成形机传动装置创新设计

    Institute of Scientific and Technical Information of China (English)

    安美玲; 穆玺清

    2011-01-01

    对管螺纹成形机传动装置进行了设计方案分析和比较,设计了无轴式二级齿轮传动装置,应用Matlab软件对其尺寸参数进行了优化,使该传动装置结构紧凑,便于移动.%Design schemes for gear system of pipe thread forming machines were analyzed and compared to design a shaftless two-stage gear system and to have its size parameters optimized with Matlab software. The compact structure and easy to move characterize this gear system.

  6. 煤层气水平井完井用塑料筛管优化设计%Optimized Design of Plastic Screen Pipe for Coal Bed Methane Horizontal Well Completion

    Institute of Scientific and Technical Information of China (English)

    付利; 申瑞臣; 苏海洋; 乔磊; 王开龙

    2012-01-01

    塑料筛管完井技术能够提高煤层井壁的支撑能力,并能有效解决粉煤灰堵泵问题。在介绍塑料筛管完井工艺的基础上,对塑料筛管的几何参数进行了设计,采用计算流体动力学方法,使用Fluent软件对塑料筛管进行了压力损失计算,并对计算结果进行了分析和优化。分析结果表明,过流面积比越大压力损失越小,缝宽越小压力损失越小,筛眼越长越有利于降低压力损失;筛眼宽度对长条形筛管强度的影响很小,筛管变形位移随筛眼长度的增大而增大,60°相位角的筛管变形位移小且分布均匀。建议采用相位角呈60°、筛眼宽度为7 mm、筛眼长度为23~26 mm,过流面积比为3%~4%的筛管设计方案。%The plastic screen pipe can improve the supporting capacity of coal bed methane (CBM) well wall and effectively prevent fly ash from plugging the pump. The completion technology of plastic screen pipe was first introduced and then the geometric parameters of the screen pipe were designed. The computational fluid dynamic method and the Fluent software were adopted to conduct a calculation of the screen pipe pressure loss. The calcula- tion result was analyzed and optimized. The analysis shows that the greater the open area ratio, the less the pressure loss ; the smaller the slot width, the less the pressure loss ; the longer the screen mesh, the more favorable to the re- duction of pressure loss. The screen mesh width has little effect on the strength of long strip screen pipe. The de- formation and displacement of the screen pipe increase with the screen mesh length. The deformation and displacement of the screen pipe with the phase angle of 60°are less remarkable with an even distribution. It is suggested that the design scheme of the screen pipe be adopted with the phase angle being 60°, the screen mesh width being 7 ram, the screen mesh length being 23 -26 ram, and the open area ratio being 3% -4%.

  7. Reeling of tight fit pipe

    NARCIS (Netherlands)

    Focke, E.S.

    2007-01-01

    If it would be possible to install Tight Fit Pipe by means of reeling, it would be an attractive new option for the exploitation of offshore oil and gas fields containing corrosive hydrocarbons. Tight Fit Pipe is a mechanically bonded double walled pipe where a corrosion resistant alloy liner pipe

  8. Experimenting with a "Pipe" Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-01-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here…

  9. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...... algorithm using successive linear programming is presented. The performance of the algorithm is illustrated by optimizing a network with 201 pipes and 172 nodes. It is concluded that the new algorithm seems to be very efficient and stable, and that it always finds a solution with a cost near the best...

  10. Application of LBB to a nozzle-pipe interface

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y.J.; Sohn, G.H.; Kim, Y.J. [and others

    1997-04-01

    Typical LBB (Leak-Before-Break) analysis is performed for the highest stress location for each different type of material in the high energy pipe line. In most cases, the highest stress occurs at the nozzle and pipe interface location at the terminal end. The standard finite element analysis approach to calculate J-Integral values at the crack tip utilizes symmetry conditions when modeling near the nozzle as well as away from the nozzle region to minimize the model size and simplify the calculation of J-integral values at the crack tip. A factor of two is typically applied to the J-integral value to account for symmetric conditions. This simplified analysis can lead to conservative results especially for small diameter pipes where the asymmetry of the nozzle-pipe interface is ignored. The stiffness of the residual piping system and non-symmetries of geometry along with different material for the nozzle, safe end and pipe are usually omitted in current LBB methodology. In this paper, the effects of non-symmetries due to geometry and material at the pipe-nozzle interface are presented. Various LBB analyses are performed for a small diameter piping system to evaluate the effect a nozzle has on the J-integral calculation, crack opening area and crack stability. In addition, material differences between the nozzle and pipe are evaluated. Comparison is made between a pipe model and a nozzle-pipe interface model, and a LBB PED (Piping Evaluation Diagram) curve is developed to summarize the results for use by piping designers.

  11. Research on Oil/Gas In-pipe Inspection Robot

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A new type of in-pipe mobile robot was designed and developed on the basis of wheel in-pipe robot and crawler in-pipe robot. The three sets of driving wheels circumferentially 120° apart in the cross section, both front and rear driving wheels are distributed on the same parallelogram mechanism. The driving motor drives the three sets of driving wheels by worm couple, the regulating motor makes the three sets of driving wheels push against the pipe inwall with stable and adequate pressing force by the ball screw pair and pressure sensor, so the in-pipe robot can provide adequate and stable traction force. The robot mechanism is simple and small in size and work reliably. It is particularly suitable to the pipe with diameter 400~650 mm.

  12. Development of heat pipes for solar water heaters

    Energy Technology Data Exchange (ETDEWEB)

    Akyurt, M.

    1984-01-01

    Numerous heat pipes were designed, manufactured, and filled on a specially developed filling rig. Each heat pipe was incorporated into a prototype solar water heater developed for this purpose, and was tested under actual insolation conditions. An extensive testing program lasting for more than a year revealed that the heat pipes perform satisfactorily as heat transfer elements in solar water heaters. A special heat pipe featuring a compact and effective condenser configuration was also tested. It was observed to likewise exhibit isothermal behavior and hence promised potential for large scale solar applications.

  13. A STRUCTURAL INTEGRITY ASSESSMENT OF UNDERGROUND PIPING ASSOCIATED WITH THE TRANSFER OF RADIOACTIVE WASTE

    Energy Technology Data Exchange (ETDEWEB)

    Wiersma, B

    2006-04-25

    Radioactive wastes are confined in 49 underground storage tanks at the Savannah River Site. The waste is transported between tanks via underground transfer piping. An assessment of the structural integrity of the transfer piping was performed to ensure that the present condition of the piping was sound and to provide life expectancy estimates for the piping based on anticipated service. The assessment reviewed the original design of the piping, the potential and observed degradation mechanisms, the results from past inspections of the piping, and a Fitness-For-Service evaluation for a section of piping that experienced pitting in a locally thinned area. The assessment concluded that the piping was structurally sound. Assuming that service conditions remain the same, the piping will remain functional for its intended service life.

  14. Light as a key driver of freshwater biofouling surface roughness in an experimental hydrocanal pipe rig.

    Science.gov (United States)

    Ravizza, Matilde; Giosio, Dean; Henderson, Alan; Hovenden, Mark; Hudson, Monica; Salleh, Sazlina; Sargison, Jane; Shaw, Jennifer L; Walker, Jessica; Hallegraeff, Gustaaf

    2016-07-01

    Biofouling in canals and pipelines used for hydroelectric power generation decreases the flow capacity of conduits. A pipeline rig was designed consisting of test sections of varying substrata (PVC, painted steel) and light levels (transparent, frosted, opaque). Stalk-forming diatoms were abundant in both the frosted and transparent PVC pipes but negligible in the painted steel and opaque PVC pipes. Fungi were slightly more abundant in the painted steel pipe but equally present in all the other pipes while bacterial diversity was similar in all pipes. Photosynthetically functional biofouling (mainly diatoms) was able to develop in near darkness. Different biological fouling compositions generated differing friction factors. The highest friction factor was observed in the transparent pipe (densest diatom fouling), the lowest peak friction for the opaque PVC pipe (lowest fouling biomass), and with the painted steel pipe (high fouling biomass, but composed of fungal and bacterial crusts) being intermediate between the opaque and frosted PVC pipes.

  15. An electrohydrodynamic heat pipe

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    Dielectric liquid for transfer of heat provides liquid flow from the condenser section to the evaporator section in conventional heat pipes. Working fluid is guided or pumped by an array of wire electrodes connected to a high-voltage source.

  16. 46 CFR 182.430 - Engine exhaust pipe installation.

    Science.gov (United States)

    2010-10-01

    ... installation. (a) The design of all exhaust systems must ensure minimum risk of injury to personnel. Protection... be used in bulkhead penetration glands for dry exhaust systems. A wet exhaust pipe may be welded to a... 46 Shipping 7 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 182.430 Section...

  17. 46 CFR 56.50-30 - Boiler feed piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Boiler feed piping. 56.50-30 Section 56.50-30 Shipping... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-30 Boiler feed piping. (a) General... least two separate means of supplying feed water for the boilers. All feed pumps shall be fitted...

  18. Temperature stratification in a hot water tank with circulation pipe

    DEFF Research Database (Denmark)

    Andersen, Elsa

    1998-01-01

    The aim of the project is to investigate the change in temperature stratification due to the operation of a circulation pipe. Further, putting forward rules for design of pipe inlet in order not to disturb the temperature stratification in the hot water tank. A validated computer model based...

  19. Stuck pipe prediction

    KAUST Repository

    Alzahrani, Majed

    2016-03-10

    Disclosed are various embodiments for a prediction application to predict a stuck pipe. A linear regression model is generated from hook load readings at corresponding bit depths. A current hook load reading at a current bit depth is compared with a normal hook load reading from the linear regression model. A current hook load greater than a normal hook load for a given bit depth indicates the likelihood of a stuck pipe.

  20. The Monster Sound Pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-01-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which…

  1. Heat pipe dynamic behavior

    Science.gov (United States)

    Issacci, F.; Roche, G. L.; Klein, D. B.; Catton, I.

    1988-01-01

    The vapor flow in a heat pipe was mathematically modeled and the equations governing the transient behavior of the core were solved numerically. The modeled vapor flow is transient, axisymmetric (or two-dimensional) compressible viscous flow in a closed chamber. The two methods of solution are described. The more promising method failed (a mixed Galerkin finite difference method) whereas a more common finite difference method was successful. Preliminary results are presented showing that multi-dimensional flows need to be treated. A model of the liquid phase of a high temperature heat pipe was developed. The model is intended to be coupled to a vapor phase model for the complete solution of the heat pipe problem. The mathematical equations are formulated consistent with physical processes while allowing a computationally efficient solution. The model simulates time dependent characteristics of concern to the liquid phase including input phase change, output heat fluxes, liquid temperatures, container temperatures, liquid velocities, and liquid pressure. Preliminary results were obtained for two heat pipe startup cases. The heat pipe studied used lithium as the working fluid and an annular wick configuration. Recommendations for implementation based on the results obtained are presented. Experimental studies were initiated using a rectangular heat pipe. Both twin beam laser holography and laser Doppler anemometry were investigated. Preliminary experiments were completed and results are reported.

  2. 大口径涂料法水冷金属型离心铸管机的设计%Design of Centrifugal Casting Machine for Pipe of Large Scale S.G.Ductile Cast Iron

    Institute of Scientific and Technical Information of China (English)

    习杰

    2011-01-01

    Design principle and method of centrifugal casting machine for production of pipe of large scale s.g. ductile cast iron with DN1000mm and above by coated water cooled die centrifugal casting have been mainly introduced.%主要介绍了DN1000以上大口径球墨铸铁管采用涂料法水冷金属型工艺生产时,离心铸管机的设计原理及方法.

  3. Design of core-pulling mechanism of injection mould for flaring pipe fitting%扩口类管件注射模抽芯机构设计

    Institute of Scientific and Technical Information of China (English)

    苏伟

    2014-01-01

    分析了扩口类管件结构及成型工艺,以ϕ75 mm扩口管件为例详细介绍了扩口管件注射模的结构,阐述了扩口管件模具抽芯机构、锁模机构以及定位机构等的设计,叙述了模具工作过程,可为扩口类模具设计提供思路。%The structure and forming process of a flaring pipe fitting was analyzed; and the structure and working process of an injection mould for a ϕ75 mm flaring pipe fitting were presented, in particular the flaring, core-pulling, mould clamping and positioning mech-anism.

  4. 钢管折叠门及铰链式插销设计%The Design of Steel-pipe Pull-down Door and Hinge-type latch

    Institute of Scientific and Technical Information of China (English)

    吴福明; 赵天婵

    2000-01-01

    介绍了一种钢管折叠门及铰链式插销的设计。该设计解决了门关闭时整体刚度差、门打开时存在死点的问题,可借助铰链式插销锁紧折叠门。%This article introduce a design of steel-pipe Pull-down door and hinge-type latch. This design preferably solves the technical problems when do designing the door in pre-design, such as integral rigidity being not very good, exciting fatal points when opening the door and so on. We can conveniently lock the pull-down doors by the hinge-type latch. The effect has been proved well by trial-manufacture and putting to use.

  5. Heat pipe reactors for space power applications

    Science.gov (United States)

    Koenig, D. R.; Ranken, W. A.; Salmi, E. W.

    1977-01-01

    A family of heat pipe reactors design concepts has been developed to provide heat to a variety of electrical conversion systems. Three power plants are described that span the power range 1-500 kWe and operate in the temperature range 1200-1700 K. The reactors are fast, compact, heat-pipe cooled, high-temperature nuclear reactors fueled with fully enriched refractory fuels, UC-ZrC or UO2. Each fuel element is cooled by an axially located molybdenum heat pipe containing either sodium or lithium vapor. Virtues of the reactor designs are the avoidance of single-point failure mechanisms, the relatively high operating temperature, and the expected long lifetimes of the fuel element components.

  6. Simulation of guided waves in complex piping geometries using the elastodynamic finite integration technique.

    Science.gov (United States)

    Rudd, Kevin E; Leonard, Kevin R; Bingham, Jill P; Hinders, Mark K

    2007-03-01

    Although many technologies exist for inspecting piping systems, they are most successful on straight pipes and are often unable to accommodate the added complexities of pipe elbows, bends, twists, and branches, particularly if the region of interest is inaccessible. This paper presents a numerical technique based on the elastodynamic finite integration technique for simulating guided elastic wave propagation in piping systems. Comparisons show agreement between experimental and simulated data, and guided wave interaction with flaws, focusing, and propagation in pipe bends are presented. These examples demonstrate the ability of the simulation method to be used to study elastic wave propagation in piping systems which include three-dimensional pipe bends, and suggest its potential as a design tool for designing pipe inspection hardware and ultrasonic signal processing algorithms.

  7. Process Requirements for Piping Design in the Cold Box of Air Separation Unit%空分装置冷箱内配管的工艺流程要求

    Institute of Scientific and Technical Information of China (English)

    孙东升; 李超

    2015-01-01

    The principle of piping design is to meet the process requirements, ensure the safety and economic rational?ity of the pipeline and related equipment. Meeting the requirements of the process is the most important task of the piping design,it is saturated gas,liquid or medium of two-phase flow in the pipeline of air separation unit cold box, the process has many requirements for the details of pipelines, and needs the pipeline designers to pay attention.%管道设计的原则是满足工艺流程要求、保证管道及相关设备的安全性和经济性.满足工艺流程要求是管道设计的首要任务,空分装置冷箱管道内是饱和的气体、液体或两相流介质,工艺流程对配管有很多细节要求,需要管道设计人员重视.

  8. 46 CFR 38.10-10 - Cargo piping-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo piping-TB/ALL. 38.10-10 Section 38.10-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Piping, Valves, Fittings, and Accessory Equipment § 38.10-10 Cargo piping—TB/ALL. (a) The piping shall be designed for...

  9. An optical method for measuring the thickness of a falling condensate in gravity assisted heat pipe

    Directory of Open Access Journals (Sweden)

    Kasanický Martin

    2015-01-01

    Full Text Available A large number of variables is the main problem of designing systems which uses heat pipes, whether it is a traditional - gravity, or advanced - capillary, pulsating, advanced heat pipes. This article is a methodology for measuring the thickness of the falling condensate in gravitational heat pipes, with using the optical triangulation method, and the evaluation of risks associated with this method.

  10. An optical method for measuring the thickness of a falling condensate in gravity assisted heat pipe

    Science.gov (United States)

    Kasanický, Martin; Lenhard, Richard; Kaduchová, Katarína; Malcho, Milan

    2015-05-01

    A large number of variables is the main problem of designing systems which uses heat pipes, whether it is a traditional - gravity, or advanced - capillary, pulsating, advanced heat pipes. This article is a methodology for measuring the thickness of the falling condensate in gravitational heat pipes, with using the optical triangulation method, and the evaluation of risks associated with this method.

  11. 49 CFR 192.115 - Temperature derating factor (T) for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Temperature derating factor (T) for steel pipe... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.115 Temperature derating factor (T) for steel pipe. The temperature derating factor to be used in...

  12. 46 CFR 76.25-10 - Size and arrangement of sprinkler heads and pipe sizes.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Size and arrangement of sprinkler heads and pipe sizes... sprinkler heads and pipe sizes. (a) General. (1) The system shall be so designed and arranged that the... projection of the deck is more than 7 feet from a sprinkler head. (b) Pipe sizes. (1) The sizes of branch...

  13. 49 CFR 192.113 - Longitudinal joint factor (E) for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Longitudinal joint factor (E) for steel pipe. 192... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.113 Longitudinal joint factor (E) for steel pipe. The longitudinal joint factor to be used in the...

  14. Heat Pipe Integrated Microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

    1999-03-30

    The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached

  15. Buckling Characteristics of Cylindrical Pipes

    Institute of Scientific and Technical Information of China (English)

    Toshiaki Sakurai

    2015-01-01

    This paper describes the buckling pattern of the body frame by energy absorbed efficiency of crashworthiness related toresearch of the buckling characteristics of aluminum cylindrical pipes with various diameters formed mechanical tools. Experimentswere performed by the quasi-static test without lubrication between specimen and equipment. According to the change in the radiusversus thickness of the specimen, the buckling phenomena are transformed from folding to bellows and the rate of energy absorptionis understood. In crashworthiness, frames are characterized by the folding among three patterns from the absorbed energy efficiencypoint of view and weight reduction. With the development of new types of transport such as electric vehicles, innovated bodystructure should be designed.

  16. 基于新型导光管的微型DLP投影式光路设计%Optical design of micro DLP projection based on novel light pipe

    Institute of Scientific and Technical Information of China (English)

    王程; 郝文良; 田丽伟; 王若飞; 朱向冰

    2015-01-01

    Traditional DLP technologies can not collect and utilize the light which is reflected by the micromirrors of DMD in the "OFF" state. Aiming at this defect, one design scheme of the micro DLP projection system based on a novel light pipe was presented. This system included LEDs, light pipe, color wheel, the collimation system and projection lens. A bending light pipe was added on the base of the tapered light pipe, and a compound parabolic concentrator (CPC) was used in the input end to collect the extra light reflected by the DMD. First, the related parameters of each part were analyzed and calculated according to the nonimaging optics theory. Second, the collimation system and projection lens were optimized by ZEMAX software. Finally, the model was built and simulated in TracePro software. The simulation results show that: with the number of micromirrors in the "OFF" state growing, the improving light efficiency ability of collecting light pipe first increases then decreases. Comparing with having no collecting light pipe, the light efficiency is increased by 5.33%; light pipe improves the most light efficiency, 5.91%, when half of the micromirrors are in the "OFF" state.%传统的数字光处理(DLP)技术无法收集利用数字微镜(DMD)芯片上微镜处于“OFF”态时反射的光线,针对这种缺陷,提出一种基于新型导光管的微型DLP投影光学系统的设计方案,该系统包括LED、导光管、色轮、准直系统和投影透镜。提出在锥形导光管的基础上加上一根弯型的导光管和复合抛物面聚光器(CPC)用来收集被DMD反射的多余的光线。先用非成像光学的理论分析和计算出各部分的相关参数,再用ZEMAX软件对准直系统和投影透镜进行结构优化,最后用TracePro软件建立模型并仿真,仿真结果表明:随着“OFF”态微镜数量的增加,收集光管提高系统光能利用率的能力先增加后减小。相比没有收集光管的情况,当DMD

  17. Heat pipe radiator. [for spacecraft waste heat rejection

    Science.gov (United States)

    Swerdling, B.; Alario, J.

    1973-01-01

    A 15,000 watt spacecraft waste heat rejection system utilizing heat pipe radiator panels was investigated. Of the several concepts initially identified, a series system was selected for more in-depth analysis. As a demonstration of system feasibility, a nominal 500 watt radiator panel was designed, built and tested. The panel, which is a module of the 15,000 watt system, consists of a variable conductance heat pipe (VCHP) header, and six isothermalizer heat pipes attached to a radiating fin. The thermal load to the VCHP is supplied by a Freon-21 liquid loop via an integral heat exchanger. Descriptions of the results of the system studies and details of the radiator design are included along with the test results for both the heat pipe components and the assembled radiator panel. These results support the feasibility of using heat pipes in a spacecraft waste heat rejection system.

  18. Commercial high efficiency dehumidification systems using heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    An improved heat pipe design using separately connected two-section one-way flow heat pipes with internal microgrooves instead of wicks is described. This design is now commercially available for use to increase the dehumidification capacity of air conditioning systems. The design also includes a method of introducing fresh air into buildings while recovering heat and controlling the humidity of the incoming air. Included are applications and case studies, load calculations and technical data, and installation, operation, and maintenance information.

  19. Pigging ends freezeups in caustic piping system

    Energy Technology Data Exchange (ETDEWEB)

    Gros, R.; Gaines, A.

    1985-03-01

    Convent Chemical Corporation in Convent, LA produces and ships bulk quantities of chlorine and caustic soda (NaOH). The caustic soda is available in various grades, including a 50% aqueous solution that freezes at 56/sup 0/F. An extensive network of chemical-resistant polypropylene-lined steel pipe (without heat tracing) is used to transfer the caustic soda from the production area to storage tanks and to the loading facilities for tank trucks, rail tank cars and barges. A sudden drop in ambient temperature can cause freezeup of the caustic transfer pipes which may result in downtime of as much as a week. Convent plant engineers designed a pigging system for the outdoor caustic transfer lines in the tank farm and to the loading stations. The patented design pig, (internal pipeline cleaner) consists of a flexible, bullet-shaped cylinder of chemical-resistant polyurethane foam with strips of urethane rubber on the surface, or with a solid coating of the tough material. Fluid or gas pressure on the sealed concave base propels the flexible pig through the pipe, valves, elbows, and other fittings, and material ahead of the pig is discharged into an appropriate receiver. The pigging system has eliminated the caustic freezing and plugging problems since it was installed in the summer of 1981. The flexible pig, propelled by 80 psi air, is used to clear the pipelines whenever caustic is transferred during the winter months. The air-propelled pig is designed and sized to easily pass through restrictions in the piping system, such as reduced port plug valves, but was once stuck when it reached a section of pipe that had collapsed. A pig containing the Cobalt 60 nuclear element was inserted into the line to quickly locate the stuck pig with the Geiger counter. The faulty section of pipe was replaced with a new polypropylene lined spool piece.

  20. Application Study of Ergonomics in Piping Routing Design of Nuclear Power Plant%人机工程学在核电站管道布置中的应用探讨

    Institute of Scientific and Technical Information of China (English)

    刘永

    2012-01-01

    From the aspect of human body sizes parameters, human physiologic properties and personal safety, it describes some ergonomics issues that are applied to piping layout design. Sufficient human factor should be con sidered in nuclear power plant piping routing design work in order to fit tightly with body height, height of eyes and passing through width, to match human visibility range and muscle power, facilitate the operation for people and to guarantee personal safety and health of operators.%分别从人体尺寸参数、人体生理结构和人员的人身安全三个方面,对一些管道布置中的人机工程学应用问题进行了阐述.核电站管道布置应充分考虑人的因素,与人体身高、眼高、通行宽度等尺寸参数相配合,与人的视距范围和手臂出力等生理特征相适应,方便人员操作,并保证操作者的人身安全和人体健康.

  1. The development of a practical pipe auto-routing system in a shipbuilding CAD environment using network optimization

    Science.gov (United States)

    Kim, Shin-Hyung; Ruy, Won-Sun; Jang, Beom Seon

    2013-09-01

    An automatic pipe routing system is proposed and implemented. Generally, the pipe routing design as a part of the shipbuilding process requires a considerable number of man hours due to the complexity which comes from physical and operational constraints and the crucial influence on outfitting construction productivity. Therefore, the automation of pipe routing design operations and processes has always been one of the most important goals for improvements in shipbuilding design. The proposed system is applied to a pipe routing design in the engine room space of a commercial ship. The effectiveness of this system is verified as a reasonable form of support for pipe routing design jobs. The automatic routing result of this system can serve as a good basis model in the initial stages of pipe routing design, allowing the designer to reduce their design lead time significantly. As a result, the design productivity overall can be improved with this automatic pipe routing system

  2. Detection of Gas Slugs in Heat Pipes

    Science.gov (United States)

    Jones, J. A.

    1985-01-01

    Temperature sensing system detects presence of gas slugs in heat pipes. System designed for operation between zero and 70 degrees C and detects noncondensable pockets of gas that result from decomposition of ammonia cooling fluid. Slugs 1 in. (25mm) in length detected.

  3. 46 CFR 108.447 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.447 Section 108.447 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire... CO2 system may not be used for any other purpose except as part of a fire detection system. (i)...

  4. Drag reduction properties of superhydrophobic mesh pipes

    Science.gov (United States)

    Geraldi, Nicasio R.; Dodd, Linzi E.; Xu, Ben B.; Wells, Gary G.; Wood, David; Newton, Michael I.; McHale, Glen

    2017-09-01

    Even with the recent extensive study into superhydrophobic surfaces, the fabrication of such surfaces on the inside walls of a pipe remains challenging. In this work we report a convenient bi-layered pipe design using a thin superhydrophobic metallic mesh formed into a tube, supported inside another pipe. A flow system was constructed to test the fabricated bi-layer pipeline, which allowed for different constant flow rates of water to be passed through the pipe, whilst the differential pressure was measured, from which the drag coefficient (ƒ) and Reynolds numbers (Re) were calculated. Expected values of ƒ were found for smooth glass pipes for the Reynolds number (Re) range 750-10 000, in both the laminar and part of the turbulent regimes. Flow through plain meshes without the superhydrophobic coating were also measured over a similar range (750  superhydrophobic coating, ƒ was found for 4000  superhydrophobic mesh can support a plastron and provide a drag reduction compared to a plain mesh, however, the plastron is progressively destroyed with use and in particular at higher flow rates.

  5. 基于可靠性的复合材料定向管优化设计%RELIABILITY-BASED OPTIMIZATION DESIGN OF COMPOSITE MATERIAL DIRECTION PIPE

    Institute of Scientific and Technical Information of China (English)

    蔡德咏; 马大为; 赵英英

    2012-01-01

    Base on the Tsai-Wu failure criterion and first order reliability method(FORM), the reliability analysis of a composite material direction pipe is carried out. Secondary development of ABAQUS by using Python language, the finite element program and the reliability analysis method are combined. The reliabilitybased optimization model of a composite material direction pipe is obtained by the combined optimal strategy with multi-island genetic algorithm (MIGA) and sequential quadratic programming (SQP).The results of an example application show that the weight of the composite material direction pipe decreased by 22.5% with the requirement of strength reliability.%基于Tsai-Wu失效准则和一次二阶矩法,建立了复合材料定向管强度可靠性分析的方法。应用Python语言实现了ABAQUS的二次开发,编程将有限元计算程序与可靠性分析方法相结合,并采用多岛遗传算法和序列二次规划算法相结合优化策略,建立了基于可靠性的定向管铺层参数动态优化模型。优化算例表明:在满足强度可靠度条件下,复合材料定向管重量减小了22.5%。

  6. Heat pipes and use of heat pipes in furnace exhaust

    Science.gov (United States)

    Polcyn, Adam D.

    2010-12-28

    An array of a plurality of heat pipe are mounted in spaced relationship to one another with the hot end of the heat pipes in a heated environment, e.g. the exhaust flue of a furnace, and the cold end outside the furnace. Heat conversion equipment is connected to the cold end of the heat pipes.

  7. 管节点焊缝超声波检测模拟试块的设计与制作%Design and Manufacture of Simulation Test Block for Weld Pipe Node in Ultrasonic Inspection

    Institute of Scientific and Technical Information of China (English)

    黄扬雄; 林东文; 郭志贤

    2015-01-01

    To accelerate the application of phased array ultrasonic technology in weld pipe joint in lieu of conventional ultrasonic technology, inspection procedure should be demonstrated on a simulation test block to perform acceptability. The Phased array technology standards or the Weld pipe node test case speciifcation cannot guide us how to manufacture the simulation test block in detail. In order to solve the problem mentioned above, simulation test block was designed and manufactured as combined with engineering reality. It showed that with the help of simulation test block, the phased array ultrasonic technology is feasible for the weld pipe node joints.%为推动超声相控阵检测技术在管节点焊缝上的应用,替代传统的超声检测技术,需要在管节点焊缝模拟试块上进行演示,验证工艺的可行性。而关于相控阵技术标准或管节点焊缝检测的案例规范中并无关于模拟试块的制作要求。为了解决该问题,结合工程实际,设计并制作了典型的Y型管节点焊缝模拟试块,并在试块上验证了超声相控阵检测技术的可行性。

  8. Design of signal processing system of portable quality detector for oil drill pipes%便携式钻杆质量检测仪信号处理系统的设计

    Institute of Scientific and Technical Information of China (English)

    陈彬; 何箭

    2014-01-01

    便携式钻杆质量检测仪可在油气开采现场对钻杆进行无损检测,野外作业的特点对信号处理系统提出了体积小、功耗低、检测灵敏度高以及与显示终端间数据传输灵活的要求。文章设计了一套完整的可进行信号采集、处理、显示的嵌入式软硬件系统和手持终端软件系统,嵌入式处理系统与手持式显示终端之间采用无线方式进行数据通信。整套系统性能符合相应的国家标准,能够满足野外开采现场对钻杆进行检测的需要。%Portable drill pipe quality detector can conduct nondestructive test on drill pipe at oil and gas extracting sites .The signal processing system fulfills the requirements of field operation with compact size ,low power consumption and high detection sensitivity with flexible data transmission between display terminal and DSP .The embedded software and hardware system and the software for portable display terminal system are designed ,working as a complete set for data acquisition ,processing and display .The system which owns relatively high sampling sensitivity and sampling precision with wire-less transmission for terminal data is suitable for the drill pipe testing in field extracting operations , and it meets the requirements of related national standards .

  9. Composite drill pipe

    Science.gov (United States)

    Leslie, James C [Fountain Valley, CA; Leslie, II, James C.; Heard, James [Huntington Beach, CA; Truong, Liem , Josephson; Marvin, Neubert [Huntington Beach, CA; Hans, [Anaheim, CA

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  10. Heat-pipe Earth.

    Science.gov (United States)

    Moore, William B; Webb, A Alexander G

    2013-09-26

    The heat transport and lithospheric dynamics of early Earth are currently explained by plate tectonic and vertical tectonic models, but these do not offer a global synthesis consistent with the geologic record. Here we use numerical simulations and comparison with the geologic record to explore a heat-pipe model in which volcanism dominates surface heat transport. These simulations indicate that a cold and thick lithosphere developed as a result of frequent volcanic eruptions that advected surface materials downwards. Declining heat sources over time led to an abrupt transition to plate tectonics. Consistent with model predictions, the geologic record shows rapid volcanic resurfacing, contractional deformation, a low geothermal gradient across the bulk of the lithosphere and a rapid decrease in heat-pipe volcanism after initiation of plate tectonics. The heat-pipe Earth model therefore offers a coherent geodynamic framework in which to explore the evolution of our planet before the onset of plate tectonics.

  11. A study on the experimental verification for the pipe whip problem in a Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yeong Shin; Choi, Myeong Hwan; Kim, Yeong Wan; Hyeon, Joong Sup; Han, Jae Do; Kang, Yun Gee [Chungnam National Univ., Taejon (Korea, Republic of)

    1993-12-15

    The purpose of this study is to investigate on the experimental verification analysis for the pipe whip problems and to obtain the quantitative evaluation technologies for the design technique of pipe whip restraints. These will contribute to the advance of nuclear regulatory technologies and enhance nuclear power plant safety. This study presents the experimental and transient analytical results of pipe whip tests using the 4', 6' diameter pipe and U-shaped restraints. In the tests, the effects of the overhang length, clearance, impact height on the pipe whip behavior of the pipe-restraints were investigated. The transient impact analysis of the pipe-restraint system was conducted by the finite element program ABAQUS. The applicability of the ABAQUS program to the pipe whip analysis is made clear through this analysis.

  12. PE 100 pipe systems

    CERN Document Server

    Brömstrup, Heiner

    2012-01-01

    English translation of the 3rd edition ""Rohrsysteme aus PE 100"". Because of the considerably increased performance, pipe and pipe systems made from 100 enlarge the range of applications in the sectors of gas and water supply, sewage disposal, industrial pipeline construction and in the reconstruction and redevelopment of defective pipelines (relining). This book applies in particular to engineers, technicians and foremen working in the fields of supply, disposal and industry. Subject matters of the book are all practice-relevant questions regarding the construction, operation and maintenance

  13. PPOOLEX experiments with a modified blowdown pipe outlet

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2009-08-15

    This report summarizes the results of the experiments with a modified blowdown pipe outlet carried out with the PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through a vertical DN200 blowdown pipe to the condensation pool. Four reference experiments with a straight pipe and ten with the Forsmark type collar were carried out. The main purpose of the experiment series was to study the effect of a blowdown pipe outlet collar design on loads caused by chugging phenomena (rapid condensation) while steam is discharged into the condensation pool. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. During the experiments the initial temperature level of the condensation pool water was either 20-25 or 50-55 deg. C. The steam flow rate varied from 400 to 1200 g/s and the temperature of incoming steam from 142 to 185 deg. C. In the experiments with 20-25 deg. C pool water, even 10 times higher pressure pulses were measured inside the blowdown pipe in the case of the straight pipe than with the collar. In this respect, the collar design worked as planned and removed the high pressure spikes from the blowdown pipe. Meanwhile, there seemed to be no suppressing effect on the loads due to the collar in the pool side in this temperature range. Registered loads in the pool were approximately in the same range (or even a little higher) with the collar as with the straight pipe. In the experiments with 50-55 deg. C pool water no high pressure pulses were measured inside the blowdown pipe either with the straight pipe or with the collar. In this case, more of the suppressing effect is probably due to the warmer pool water than due to the modified pipe outlet. It has been observed already in the earlier experiments with a straight pipe in the POOLEX and PPOOLEX facilities that warm pool water has a diminishing effect on

  14. EXTRUSION DIE CAE OF THE STEEL REINFORCED PLASTIC PIPE

    Institute of Scientific and Technical Information of China (English)

    W.Q. Ma; H.Y. Sun; D.C. Kang; K.D. Zhao

    2004-01-01

    The steel reinforced plastic pipe is a new kind of pressure pipe. It is made up with steel wires and plastic. Because reinforced skeleton of the steel wire increase the complexity of plastic flow during the extrusion phase, the traditional design criteria of extrusion die is not suitable. The study on extrusion die of the kind of pipe is very important step in produce development. Using finite element (FE) method in this paper, the flow rule of molten plastic inside the die has been predicted and a group of optimal structural parameters was obtained. These results are helpful for reducing the design cycle and improve the quality of the final product.

  15. 33 CFR 157.122 - Piping, valves, and fittings.

    Science.gov (United States)

    2010-07-01

    ...) Each overpressure relief valve must discharge into the suction side of a pump that meets § 157.126(b... system for oil washing and water washing, that piping system must be designed to drain the crude oil...

  16. Solid0Core Heat-Pipe Nuclear Batterly Type Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ehud Greenspan

    2008-09-30

    This project was devoted to a preliminary assessment of the feasibility of designing an Encapsulated Nuclear Heat Source (ENHS) reactor to have a solid core from which heat is removed by liquid-metal heat pipes (HP).

  17. An assessment of seismic margins in nuclear plant piping

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W.P.; Jaquay, K.R. [Energy Technology Engineering Center, Canoga Park, CA (United States); Chokshi, N.C.; Terao, D. [Nuclear Regulatory Commission, Washington DC (United States)

    1996-03-01

    Interim results of an ongoing program to assist the U.S. Nuclear Regulatory Commission (NRC) in developing regulatory positions on the seismic analyses of piping and overall safety margins of piping systems are reported. Results of: (1) reviews of seismic testing of piping components performed as part of the Electric Power Research Institute (EPRI)/NRC Piping and Fitting Dynamic Reliability (PFDR) Program, and (2) assessments of safety margins inherent in the ASME Code, Section III, piping seismic design criteria as revised by the 1994 Addenda are reported. The reviews indicate that the margins inherent in the revised criteria may be less than acceptable and that modifications to these criteria may be required.

  18. The Interlayer Stress Analysis of Polyethylene-steel Composite Pipes

    Institute of Scientific and Technical Information of China (English)

    WEI Xu-guang

    2016-01-01

    Polyethylene-steel Composite Pipes is widely used in conveying corrosive media occasions, but the pipe may lose effectiveness in the process of transporting hot and cold media, so the research of stress distribution and variation in polyethylene-steel composite pipes is very necessary.This article first assume that a thin adhesive layer is in between the polyethylene and steel, the adhesive layer along the axial shear stress is the major cause of the polyethylene layer and the steel pipe off sticky.Secondly, we use a method of finite element to computer simulation by ANSYS, and verify initial assumptions. Finally, based on simulation data, we analyse the adhesive layer stress distribution and the variation with different parameters to change.Through the above research, preliminarily summarize the variation and distribution of interlaminar stress, and provide technical support for future design and process improvement of polyethylenesteel pipe.

  19. Condensation driven water hammer studies for feedwater distribution pipe

    Energy Technology Data Exchange (ETDEWEB)

    Savolainen, S.; Katajala, S.; Elsing, B.; Nurkkala, P.; Hoikkanen, J. [Imatran Voima Oy, Vantaa (Finland); Pullinen, J. [IVO Power Engineering Ltd., Vantaa (Finland); Logvinov, S.A.; Trunov, N.B.; Sitnik, J.K. [EDO Gidropress (Russian Federation)

    1997-12-31

    Imatran Voima Oy, IVO, operates two VVER 440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of the feed water distribution (FWD) pipes were observed in 1989. In closer examinations FWD-pipe T-connection turned out to suffer from severe erosion corrosion damages. Similar damages have been found also in other VVER 440 type NPPs. In 1994 the first new FWD-pipe was replaced and in 1996 extensive water hammer experiments were carried out together with EDO Gidropress in Podolsk. After the first phase of the experiments some fundamental changes were made to the construction of the FWD-pipe. The object of this paper is to give short insight to the design of the new FWD-pipe concentrating on water hammer experiments. (orig.).

  20. Buckling behavior of pipes in oil and gas wells

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on the non-linear differential equations of buckled pipes, the buckling behavior of pipes in different wellbores has been analyzed. The relation between the deflection of buckled pipe and the loads on it has been given, and the critical loads for sinusodal and helical buckling within different wellbores subjected to axial and torsional loads have been determined. Therefore, the profile of load increase during the post-buckling process and the bending moments in the buckled pipe can be determined. In addition, the effects of down-hole packer as fixed end on the helical buckling behavior of pipes have been investigated. These results can be applied to the related engineering design and construction.

  1. Entransy dissipation analysis and optimization of separated heat pipe system

    Institute of Scientific and Technical Information of China (English)

    QIAN XiaoDong; LI Zhen; MENG JiAn; LI ZhiXin

    2012-01-01

    Seperated heat pipe systems are widely used in the fields of waste heat recovery and air conditioning due to their high heat transfer capability,and optimization of heat transfer process plays an important role in high-efficiency energy utilization and energy conservation.In this paper,the entransy dissipation analysis is conducted for the separated heat pipe system,and the result indicates that minimum thermal resistance principle is applicable to the optimization of the separated heat pipe system.Whether in the applications of waste heat recovery or air conditioning,the smaller the entransy-dissipation-based thermal resistance of the separated heat pipe system is,the better the heat transfer performance will be.Based on the minimum thermal resistance principle,the optimal area allocation relationship between evaporator and condenser is deduced,which is numerically verified in the optimation design of separated heat pipe system.

  2. Effect of Mixture Composition Design on High-performance Steel Pipe Concrete%混合料组成设计对高性能钢管混凝土的影响

    Institute of Scientific and Technical Information of China (English)

    卢海; 钱可毅; 周登文; 李东莲

    2013-01-01

    High-performance concrete is a kind of concrete which uses conventional materials and processes of production, have every required mechanical properties of concrete structure, high durability, high resistance and high dimensional stability. It can be used to steel pipe arch bridge to fill steel pipe. This paper explores the high-performance concrete material composition by using "uniformly dispersed, neat comparable" features of the orthogonal design.%  高性能混凝土采用常规材料和工艺生产,具有混凝土结构所要求各项力学性能,具有高耐久性、高工作性和高体积稳定性的混凝土,可用钢管拱桥填充钢管。本文利用正交设计的“均匀分散,齐整可比”对高性能混凝土材料组成进行探索。

  3. Tachibana Bay Electric Power Plant. Design and construction of pipe-laying works on the sea bottom for the industrial water; Tachibanawan hatsudensho. Kogyo yosui kaitei haikan koji no sekkei to seko

    Energy Technology Data Exchange (ETDEWEB)

    Shiono, A.; Tanaka, K. [Shikoku Electric Power Co., Inc., Takamatsu (Japan)

    1997-09-01

    At Kokatsu Island in the Bay of Tachibana, Anan City, Tokushima Prefecture, Tachibana Bay coal burning thermal electric power plants are now under construction. This is a joint venture of Shikoku electric Power Company and Dengen-kaihatsu (Power Resources Development Co.) with the objective of securing power supply in and after the year of 2000. The former plans one 700,000kW generator and the latter plans two 1.05 million kW generators totalling 2.8 million kW in terms of plant capacity. As for the above plants, the industrial water of 14,000m{sup 3} per day is required for various equipment including exhaust gas desulfurizers, etc. and the receiving and sending point of this industrial water is located at Ohgata Area, the northern opposite coast of this island. It is necessary to lay water pipes in the sea area from the above point up to Kokatsu Island, but this sea area lies within the important harbor designated for lanes and anchorages of vessels, hence traffic of vessels is heavy and restrictive conditions are many. Having studied various construction methods, the chain cutter simultaneous laying and burying method has been adopted. Three large calibre submarine water conveyance pipes, each of which is 250mm in inner diameter and about 2km long, have been built and the works have been completed at the end of June, 1997. 12 figs., 3 tabs.

  4. Aeronautical tubes and pipes

    Science.gov (United States)

    Beauclair, N.

    1984-12-01

    The main and subcomponent French suppliers of aircraft tubes and pipes are discussed, and the state of the industry is analyzed. Quality control is essential for tubes with regard to their i.d. and metallurgical compositions. French regulations do not allow welded seam tubes in hydraulic circuits unless no other form is available, and then rustproofed steel must be installed. The actual low level of orders for any run of tubes dictates that the product is only one of several among the manufacturers' line. Automation, both in NDT and quality control, assures that the tubes meet specifications. A total of 10 French companies participate in the industry, serving both civil and military needs, with some companies specializing only in titanium, steel, or aluminum materials. Concerns wishing to enter the market must upgrade their equipment to meet the higher aeronautical specifications and be prepared to furnish tubes and pipes that serve both functional and structural purposes simultaneously. Additionally, pipe-bending machines must also perform to tight specifications. Pipes can range from 0.2 mm exterior diameter to 40 mm, with wall thicknesses from 0.02 mm to 3 mm. A chart containing a list of manufacturers and their respective specifications and characteristics is presented, and a downtrend in production with reduction of personnel is noted.

  5. Heat-pipe planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2017-09-01

    Observations of the surfaces of all terrestrial bodies other than Earth reveal remarkable but unexplained similarities: endogenic resurfacing is dominated by plains-forming volcanism with few identifiable centers, magma compositions are highly magnesian (mafic to ultra-mafic), tectonic structures are dominantly contractional, and ancient topographic and gravity anomalies are preserved to the present. Here we show that cooling via volcanic heat pipes may explain these observations and provide a universal model of the way terrestrial bodies transition from a magma-ocean state into subsequent single-plate, stagnant-lid convection or plate tectonic phases. In the heat-pipe cooling mode, magma moves from a high melt-fraction asthenosphere through the lithosphere to erupt and cool at the surface via narrow channels. Despite high surface heat flow, the rapid volcanic resurfacing produces a thick, cold, and strong lithosphere which undergoes contractional strain forced by downward advection of the surface toward smaller radii. We hypothesize that heat-pipe cooling is the last significant endogenic resurfacing process experienced by most terrestrial bodies in the solar system, because subsequent stagnant-lid convection produces only weak tectonic deformation. Terrestrial exoplanets appreciably larger than Earth may remain in heat-pipe mode for much of the lifespan of a Sun-like star.

  6. [Piping cinnamon] 791

    OpenAIRE

    W L H Skeen and Co

    2003-01-01

    279 x 211 mm. Showing female workers making cinnamon pipes. The cinnamon is placed on a low tripod formed from four sticks, and steadied with the operator's foot while the cuticle is scraped off with a small curved knife. Annotated '791' on the bottom right hand corner of the photograph. Date approximate.

  7. Pipe Phantoms With Applications in Molecular Imaging and System Characterization.

    Science.gov (United States)

    Wang, Shiying; Herbst, Elizabeth B; Pye, Stephen D; Moran, Carmel M; Hossack, John A

    2017-01-01

    Pipe (vessel) phantoms mimicking human tissue and blood flow are widely used for cardiovascular related research in medical ultrasound. Pipe phantom studies require the development of materials and liquids that match the acoustic properties of soft tissue, blood vessel wall, and blood. Over recent years, pipe phantoms have been developed to mimic the molecular properties of the simulated blood vessels. In this paper, the design, construction, and functionalization of pipe phantoms are introduced and validated for applications in molecular imaging and ultrasound imaging system characterization. There are three major types of pipe phantoms introduced: 1) a gelatin-based pipe phantom; 2) a polydimethylsiloxane-based pipe phantom; and 3) the "Edinburgh pipe phantom." These phantoms may be used in the validation and assessment of the dynamics of microbubble-based contrast agents and, in the case of a small diameter tube phantom, for assessing imaging system spatial resolution/contrast performance. The materials and procedures required to address each of the phantoms are described.

  8. Vibration testing and analysis of a multiply supported piping system

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, B.J.; Kot, C.A.; Srinivasan, M.G.

    1987-01-01

    The behavior of nuclear power plant piping systems during earthquake, and the most appropriate and economical mode of supporting such piping, is an issue of major concern. Consequently, the verification and validation of piping analysis methods and assumptions used in the design and safety assessment of nuclear power plants are of great interest. As part of its program on the validation of seismic calculational methods the US Nuclear Regulatory Commission (NRC) is specifically interested in the validation of the multiple support piping analysis module of the SMACS (Seismic Methodology Analysis Chain with Statistics) computer code. Data for the comparison of the dynamic behavior of various pipe hanger configurations and for the validation of piping response analyses were recently obtained in the large shaker experiments (SHAG) conducted at the HDR (Heissdampfreaktor) test facility in Kahl/Main, Federal Republic of Germany. This paper describes preliminary results from the SHAG piping response tests and the approach taken in the validation of the SMACS code piping analysis.

  9. 大型催化裂化装置反应油气管道的柔性设计%Piping flexibility design for oil vapor line of large FCC unit

    Institute of Scientific and Technical Information of China (English)

    顾比伦

    2011-01-01

    The critical difficult problem resulted from the unit's large-scalization in the design of FCC oil vapor transfer line is presented, i.e. the excessive thermal expansion force of oil vapor line on the fractionator oil vapor inlet. The limitation of conventional solution in large-scalization is analyzed and effective practical solutions are described. The new unique solution is recommended, in which fold type standpipe is installed to absorb the vertical thermal expansion, the rigid supports are provided at upper and lower parts of standpipe,spring hanger is supplied for middle fold pipe and flexible hangers are installed for lower horizontal pipe. The calculation shows that the new thermal expansion compensation design is obviously superior to the conventional design in thermal expansion compensation performance.%指出了催化裂化装置由于大型化引发的反应油气管道设计难以解决的关键性问题,即油气管道易对分馏塔油气入口产生过大的热膨胀作用力.分析传统解决方案应对装置大型化的局限性,阐述适用的解决途径,提出新颖独特的解决方案:立管呈折线形状,用以吸收竖直方向的热膨胀;立管上、下部分别设刚性支撑,中部斜管上设置弹簧吊架,下部水平管上设若干弹性吊架.计算结果表明,新方案的热膨胀补偿效能明显优于传统方案.

  10. 切管机刀具气雾式保护装置设计%Design of Aerosol Type Protective Device for Pipe Cutting Machine

    Institute of Scientific and Technical Information of China (English)

    王增会; 王家珂; 杨涵坤; 石瑞芬

    2016-01-01

    介绍了一种新型的用于切管机的刀具保护装置,着重阐述新型设备中喷雾机构、吹气机构及控制触发装置的工作过程和电机的选择方法。所设计的新型设备可更好地保护刀具,其冷却效果好,操作方便,提高了刀具的使用寿命。%A new protective device for pipe cutting machine tool was introduced in this paper ,and the working process of spray mechanism ,blowing mechanism and trigger control device was emphatically expounded .The new equipment can protect cutting tool better ,and has perfect cooling and easy operation ,thus improving the service life of tool .

  11. A Novel Pre-cooling System for a Cryogenic Pulsating Heat Pipe

    Science.gov (United States)

    Xu, Dong; Liu, Huiming; Gong, Linghui; Xu, Xiangdong; Li, Laifeng

    To reduce the influence of the pipe material on the measurement of effective thermal conductivity, the pipe of a cryogenic pulsating heat pipe is generally made of stainless steel. Because of the low thermal conductivity of stainless steel, the pre-cooling of the evaporator in cryogenic pulsating heat pipe using helium as working fluid at 4.2 K is a problem. We designed a mechanical-thermal switch between the cryocooler and the evaporator, which was on during the pre-cooling process and off during the test process. By using the pre-cooling system, the cool down time of the cryogenic pulsating heat pipe was reduced significantly.

  12. 石化企业地下污水管道防渗设计%Petrochemical Enterprises Underground Waste Water Pipe Seepage Control Design

    Institute of Scientific and Technical Information of China (English)

    石玉峰

    2015-01-01

    According to the state of groundwater resources pollution prevention and control requirements in recent years, the new petrochemical projects and built devices may produce leakage , and leakage and pollution of underground sewage pipes need to be required to take anti -seepage measures.In order to protect groundwater resources and the experience of engineering , some of the common choice of underground sewage pipeline was briefly introduced , and some of the underground sewage pipeline was chosen , such as the impermeable membrane , the impermeable pipe trench and the impermeable casing.The suitable condition , the merit and the shortcoming of the seepage control and the measure that can be found in time after the pipeline leakage were described.%根据近几年来国家对地下水资源污染防控要求,新建石油化工项目、已建成装置可能产生渗漏、泄漏污染的地下污水管道均需采取防渗措施。为了保护地下水资源,结合工程经验,简单介绍了工程设计中常选择的几种地下污水管道防渗方式,防渗膜、防渗管沟及防渗套管。并叙述了这几种防渗方式的适用条件、优缺点,以及管道发生渗漏后能及时被发现的措施。

  13. Analysis of mechanical behaviors of big pipe roof for shallow buried large-span tunnel

    Institute of Scientific and Technical Information of China (English)

    Li Jian; Tan Zhongsheng; Yu Yu; Guo Xiaohong

    2013-01-01

    A series of researches on mechanical behaviors of big pipe roof for shallow large-span loess tunnel were carried out based on the Wenxiang tunnel in Zhengzhou-Xi’an Special Passenger Railway. The longitudinal de-formations of the pipe roofs were monitored and the mechanical behaviors of the pipe roofs were analyzed at the test section. A new double-parameter elastic foundation beam model for pipe roof in shallow tunnels was put for-ward in Wenxiang tunnel. The measured values and the calculation results agreed well with each other,revealing the force-deformation law of big pipe roof in loess tunnel:At about 15 m in front of the excavating face,the pipe roof starts to bear the load;at about 15 m behind the excavating face,the force of the pipe roof tends to be stabi-lized;the longitudinal deformation of the whole pipe roofs is groove-shaped distribution,and the largest force of pipe roofs is at the excavating face. Simultaneously,the results also indicate that mechanical behaviors of pipe roof closely relate to the location of the excavation face,the footage of the tunnelling cycle and the mechanics pa-rameters of pipe roof and rock. The conclusions can be reference for the design parameter optimization and the con-struction scheme selection of pipe roofs,and have been verified by the result of numerical analysis software FLAC3D and deformation monitoring.

  14. New optimized drill pipe size for deep-water, extended reach and ultra-deep drilling

    Energy Technology Data Exchange (ETDEWEB)

    Jellison, Michael J.; Delgado, Ivanni [Grant Prideco, Inc., Hoston, TX (United States); Falcao, Jose Luiz; Sato, Ademar Takashi [PETROBRAS, Rio de Janeiro, RJ (Brazil); Moura, Carlos Amsler [Comercial Perfuradora Delba Baiana Ltda., Rio de Janeiro, RJ (Brazil)

    2004-07-01

    A new drill pipe size, 5-7/8 in. OD, represents enabling technology for Extended Reach Drilling (ERD), deep water and other deep well applications. Most world-class ERD and deep water wells have traditionally been drilled with 5-1/2 in. drill pipe or a combination of 6-5/8 in. and 5-1/2 in. drill pipe. The hydraulic performance of 5-1/2 in. drill pipe can be a major limitation in substantial ERD and deep water wells resulting in poor cuttings removal, slower penetration rates, diminished control over well trajectory and more tendency for drill pipe sticking. The 5-7/8 in. drill pipe provides a significant improvement in hydraulic efficiency compared to 5-1/2 in. drill pipe and does not suffer from the disadvantages associated with use of 6-5/8 in. drill pipe. It represents a drill pipe assembly that is optimized dimensionally and on a performance basis for casing and bit programs that are commonly used for ERD, deep water and ultra-deep wells. The paper discusses the engineering philosophy behind 5-7/8 in. drill pipe, the design challenges associated with development of the product and reviews the features and capabilities of the second-generation double-shoulder connection. The paper provides drilling case history information on significant projects where the pipe has been used and details results achieved with the pipe. (author)

  15. Moderated heat pipe thermionic reactor (MOHTR) module development and test

    Science.gov (United States)

    Merrigan, Michael A.; Trujillo, Vincent L.

    1992-01-01

    The Moderated Heat Pipe Thermionic Reactor (MOHTR) thermionic space reactor design combines the low risk technology associated with the Thermionic Fuel Element (TFE) Verification Program with the high reliability heat transfer capability of liquid metal heat pipe technology. The resulting design concept, capable of implementation over the power range of 10 to 100 kWe, offers efficiency and reliability with reduced risk of single point failures. The union of TFE and heat pipe technology is achieved by imbedding TFEs and heat pipes in a beryllium matrix to which they are thermally coupled by brazing or by liquid metal (NaK or Na) bonding. The reactor employs an array of TFE modules, each comprising a TFE, a zirconium hydride (ZrH) cylinder for neutron moderation, and heat pipes for transport of heat from the collector surface of the TFE to the waste heat radiator. An advantage of the design is the low temperature drop from the collector surface to the radiating surface. This is a result of the elimination of electrical insulation from the heat transport path through electrical isolation of the modules. The module used in this study consisted of a beryllium core, and electrical cartridge heater simulating the TFE, and three heat pipes to dissipate the waste heat. The investigation was focused on the thermal performance of the assembly, including evaluation of the sodium and braze bonding options for minimizing the thermal resistance between the elements, the temperature distribution in the beryllium matrix, and the heat pipe performance. Continuing subjects of the investigation include performance of the heat pipes through start-up transients, during normal operation, and in a single heat pipe failure mode. Secondary objectives of the investigation include correlation of analytic models for the thermionic element and module including the effects of gap thermal conductances at the modules electrically insulated surfaces.

  16. Prototype testing of heat pipes for spacecraft heat control systems

    Energy Technology Data Exchange (ETDEWEB)

    Vasil' ev, L.L.; Gil, V.V.; Zharikov, N.A.; Zelenin, V.E.; Syvorotka, O.M.; Uvarov, E.I.

    1980-05-01

    Prototype testing of heat pipes for spacecraft heat control was done on board the Interkosmos-15 satellite launched on 19 June 1976. The purpose was to gather data for optimizing the design, namely the capillary structure and the selection of heat transfer agent, as well as to verify the soundness of manufacturing technologies and test procedures. Three heat pipes were tested, each 412 mm long with a 14 mm outside diameter. All had been made of an aluminum alloy. In two pipes the capillary structure consisted of 0.6 x 0.5 mm/sup 2/ rectangular channels running axially along the inside wall, in the third pipe a 1 mm thick tubular mesh of Kh18N10T steel wire running coaxially inside served as the capillary structure. The heat transfer agent was Freon-11 in one of the first two pipes and synthetic liquid ammonia in the other two pipes. The three pipes were mounted radially around a radiator as the hub, with the test conditions controllable by means of an electric heater coil along the evaporation zone of each pipe, resistance thermometers for the evaporation zone and for the condensation zone of each, and also an external cooling fan. The radial distribution of temperature drops along the pipes was measured and the thermal fluxes were calculated, these data being indicative of the performance under conditions of weightlessness over the 0 to 70/sup 0/C temperature range. The somewhat worse performance of the heat pipe with a tubular capillary mesh inside is attributable to formation of vapor bubbles which impede the mass transfer along such an artery.

  17. Design of battery control system using for drill pipe conveying storage well-logging tools%钻杆输送存储式测井仪电池控制系统设计

    Institute of Scientific and Technical Information of China (English)

    李明华

    2012-01-01

    The drill pipe conveying no cable storage logging is an important technical.it means to solve the highly deviated and horizontal wells, owe a balance wells difficulty logging. The rational use of the downhole tool battery, battery status monitoring is key to ensure that logging tools work reliably. In this paper, the design of the key part of drill pipe conveying storage logging tool battery control system hardware circuit and software, pressure acquisition temp-drift correction method was submitted, and it summarizes some the advantages of the system in the design and practical engineering applications. The application of the system in Shengli Oilfield and external oilfield demonstrated battery control system ensured that the instrument took complete and accurate logging data, solved a major technical problem of the logging project.%钻杆输送无电缆存储式测井是解决大斜度井、水平井、欠平衡井等高难度测井的重要技术手段.井下仪器电池的合理使用、电池状态的监控是保证测井仪器可靠工作的关键.文中给出了钻杆输送存储式测井仪电池控制系统的硬件电路及软件关键部分设计、压力采集温漂校正方法,总结了该系统在设计及实际工程应用中体现的一些优点.该系统在胜利油田及外部油区的应用表明,电池控制系统能够确保仪器取全取准测井资料,解决了测井工程的一大技术难题.

  18. LHCb: Beam Pipe portrait

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector: it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  19. LHCb: Beam Pipe

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector:it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  20. Pipe inspection using the pipe crawler. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  1. Utilization of heat pipes for transfer heat from the flue gas into the heat transfer medium

    Directory of Open Access Journals (Sweden)

    Lenhard Richard

    2014-03-01

    Full Text Available The contribution is listed possible application of heat pipes in systems for obtaining heat from flue gas of small heat sources. It is also stated in the contribution design an experimental device on which to study the impact of fill (the quantity, type of load at various temperature parameters (temperature heating and cooling thermal power transferred to the heat pipe. Is listed measurement methodology using heat pipes designed experimental facility, measurement results and analysis of the results obtained.

  2. Use of pipe saks on pipeline construction

    Energy Technology Data Exchange (ETDEWEB)

    Ghio, Alberto F.M.; Caciatori, Angelo [Galvao Engenharia S.A., Sao Paulo, SP (Brazil); Ruschi, Allan A.; Santos, Felipe A. dos; Barros, Horacio B. de; Loureiro, Regis R. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The use of new technologies applied to pipeline construction and assembling, aimed at enhancing productivity has been searched by PETROBRAS, throughout its subcontractors, assemblers, by transference in the mentioned constructions. Along the construction of Cacimbas Catu Pipeline, Spread 1 A, placed between the Cacimbas Gas Treatment Station (Linhares, ES) and the future Compression Station of Sao Mateus (ES), one, by means of surveys, noticed that the length of flooded or prone to flooding areas was way superior to the ones foreseen in the basic design. One of the broadly used methods for assuring buoyancy control is concreting the pipes. Such method deeply impacts work's logistics in for instance, the pipe stringing work; in this one, a maximum load of two pipes can be transported until the area to applied, what leads to lower productivity and higher risk due to the increase of trips by heavy load trucks. As an alternative to regular concrete, the Pipe Sak System was adopted and such method improved productivity and decreased discontinuities. (author)

  3. Buckling and unstable collapse of seamless pipes and tubes

    Energy Technology Data Exchange (ETDEWEB)

    Jakani, S.; Van den Abeele, F. [ArcelorMittal Global RnD Ghent, Zelzate, (Belgium); Bar, J. [ArcelorMittal Tubular Products Ostrava, Ostrava, (Czech Republic)

    2010-07-01

    Off-shore pipelines and high pressure casings are subject to buckling and unstable collapse. This paper investigated the unstable collapse of seamless pipes under compressive loading. Collapse pressure tests for high collapse casing grades L80HC and P110HC were carried out by enclosing end-capped specimens in a pressure vessel, and applying hydrostatic pressure. Analytical calculations were performed to predict the critical collapse pressure for pipes with different values of diameter to wall thickness. Four regimes were identified and studied: yielding collapse, plastic collapse, transition range and elastic collapse. Simplified design equations were produced for each regime to estimate the collapse pressure more efficiently. The influence of initial geometric imperfections and material properties was studied with the aim of developing a modified design equation for collapse able to predict the critical collapse pressure of dented seamless pipes. Experimental tests showed that the pipes complied with API standards and the modified equation was validated.

  4. 46 CFR 76.33-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.33-15 Section 76.33-15 Shipping COAST GUARD... System, Details § 76.33-15 Piping. (a) Individual pipes shall be not less than 3/4-inch standard pipe size. (b) All piping, valves, and fittings of ferrous materials shall be protected inside and...

  5. The CAD System Development for Power Plants Pipe-Prefabrication

    Institute of Scientific and Technical Information of China (English)

    RUI Xiaoming; MA Zhiyong

    2006-01-01

    An intelligent design software system for the power station pipe-prefabrication (PPDS) has been developed in the paper, which is taking pipe material database as core and developed on the platform of AutoCAD and Borland C++.Whereas design and construction of power plants in China belong to different departments, the input and recognition problem of pipeline system disposition chart must be solved firstly for the prefabrication design. Based on AI technology, the model fast building subsystem (MFBS) was established for entering the 3-D pipeline graph data, so that the problems of reconstruction of pipeline digital model and computer identification of original 2-D design data can be solved. The optimization design scheme in the pipe-prefabrication process has been studied and also the corresponding algorithm put forward. The technique and system mentioned can effectively raise the pipe- prefabrication design quality and efficiency in the construction of large scale power plants, reduce the period of design and the waste of raw material. PPCADS has still offered the functions such as the construction design for pipeline prefabricated process, the detailing drawing for manufacturing pipe section and automatic generating the technical files for the completed project.

  6. Testing of Stirling engine solar reflux heat-pipe receivers

    Energy Technology Data Exchange (ETDEWEB)

    Rawlinson, S.; Cordeiro, P.; Dudley, V.; Moss, T.

    1993-07-01

    Alkali metal heat-pipe receivers have been identified as a desirable interface to couple a Stirling-cycle engine with a parabolic dish solar concentrator. The reflux receiver provides power nearly isothermally to the engine heater heads while de-coupling the heater head design from the solar absorber surface design. The independent design of the receiver and engine heater head leads to high system efficiency. Heat pipe reflux receivers have been demonstrated at approximately 30 kW{sub t} power throughput by others. This size is suitable fm engine output powers up to 10 kW{sub e}. Several 25-kW{sub e}, Stirling-cycle engines exist, as well as designs for 75-kW{sub t} parabolic dish solar concentrators. The extension of heat pipe technology from 30 kW{sub t} to 75 kW{sub t} is not trivial. Heat pipe designs are pushed to their limits, and it is critical to understand the flux profiles expected from the dish, and the local performance of the wick structure. Sandia has developed instrumentation to monitor and control the operation of heat pipe reflux receivers to test their throughput limits, and analytical models to evaluate receiver designs. In the past 1.5 years, several heat pipe receivers have been tested on Sandia`s test bed concentrators (TBC`s) and 60-kW{sub t} solar furnace. A screen-wick heat pipe developed by Dynatherm was tested to 27.5 kW{sub t} throughput. A Cummins Power Generation (CPG)/Thermacore 30-kW{sub t} heat pipe was pushed to a throughput of 41 kW{sub t} to verify design models. A Sandia-design screen-wick and artery 75-kW{sub t} heat pipe and a CPG/Thermacore 75-kW{sub t} sintered-wick heat pipe were also limit tested on the TBC. This report reviews the design of these receivers, and compares test results with model predictions.

  7. Branch-pipe-routing approach for ships using improved genetic algorithm

    Science.gov (United States)

    Sui, Haiteng; Niu, Wentie

    2016-09-01

    Branch-pipe routing plays fundamental and critical roles in ship-pipe design. The branch-pipe-routing problem is a complex combinatorial optimization problem and is thus difficult to solve when depending only on human experts. A modified genetic-algorithm-based approach is proposed in this paper to solve this problem. The simplified layout space is first divided into threedimensional (3D) grids to build its mathematical model. Branch pipes in layout space are regarded as a combination of several two-point pipes, and the pipe route between two connection points is generated using an improved maze algorithm. The coding of branch pipes is then defined, and the genetic operators are devised, especially the complete crossover strategy that greatly accelerates the convergence speed. Finally, simulation tests demonstrate the performance of proposed method.

  8. Experimenting with a ``Pipe'' Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-04-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here allows students in a physics of music or introductory physics course to study an example of an "edge tone" device that produces discrete sound frequencies. From their textbooks, students likely know about standing waves produced by pipes or strings, as well as the resonant frequencies for open and closed pipes. To go a bit further, they can also learn how the frequency of the sound wave depends on the orifice-to-edge distance of the wind instrument.

  9. Miniaturised Optical Fibre Sensor for Dew Detection Inside Organ Pipes

    OpenAIRE

    Francesco Baldini; Riccardo Falciai; Andrea Azelio Mencaglia; Folco Senesi; Dario Camuffo; Antonio della Valle; Carl Johan Bergsten

    2008-01-01

    A new optical sensor for the continuous monitoring of the dew formation inside organ pipes was designed. This aspect is particularly critical for the conservation of organs in unheated churches since the dew formation or the condensation on the pipe surfaces can contribute to many kinds of physical and chemical disruptive mechanisms. The working principle is based on the change in the reflectivity which is observed on the surface of the fibre tip, when a water layer is formed on its distal en...

  10. Project W-320, 241-C-106 sluicing: Piping calculations. Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, J.W.

    1998-07-24

    This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The objective of this calculation is to perform the structural analysis of the Pipe Supports designed for Slurry and Supernate transfer pipe lines in order to meet the requirements of applicable ASME codes. The pipe support design loads are obtained from the piping stress calculations W320-27-I-4 and W320-27-I-5. These loads are the total summation of the gravity, pressure, thermal and seismic loads. Since standard typical designs are used for each type of pipe support such as Y-Stop, Guide and Anchors, each type of support is evaluated for the maximum loads to which this type of supports are subjected. These loads are obtained from the AutoPipe analysis and used to check the structural adequacy of these supports.

  11. Study of a risk-based piping inspection guideline system.

    Science.gov (United States)

    Tien, Shiaw-Wen; Hwang, Wen-Tsung; Tsai, Chih-Hung

    2007-02-01

    A risk-based inspection system and a piping inspection guideline model were developed in this study. The research procedure consists of two parts--the building of a risk-based inspection model for piping and the construction of a risk-based piping inspection guideline model. Field visits at the plant were conducted to develop the risk-based inspection and strategic analysis system. A knowledge-based model had been built in accordance with international standards and local government regulations, and the rational unified process was applied for reducing the discrepancy in the development of the models. The models had been designed to analyze damage factors, damage models, and potential damage positions of piping in the petrochemical plants. The purpose of this study was to provide inspection-related personnel with the optimal planning tools for piping inspections, hence, to enable effective predictions of potential piping risks and to enhance the better degree of safety in plant operations that the petrochemical industries can be expected to achieve. A risk analysis was conducted on the piping system of a petrochemical plant. The outcome indicated that most of the risks resulted from a small number of pipelines.

  12. Multileg Heat-Pipe Evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-01-01

    Parallel pipes provide high heat flow from small heat exchanger. Six parallel heat pipes extract heat from overlying heat exchanger, forming evaporator. Vapor channel in pipe contains wick that extends into screen tube in liquid channel. Rods in each channel hold wick and screen tube in place. Evaporator compact rather than extended and more compatible with existing heat-exchanger geometries. Prototype six-pipe evaporator only 0.3 m wide and 0.71 m long. With ammonia as working fluid, transports heat to finned condenser at rate of 1,200 W.

  13. Software Design and Application of Ultrasonic Automatic Flaw Detection System of Welded Steel Pipes%焊接钢管超声波自动探伤系统中的软件设计与应用

    Institute of Scientific and Technical Information of China (English)

    常少文

    2011-01-01

    The software design of pipe ultrasonic automatic flaw detection system, and its application on welded steel pipes production were introduced. It combined traditional ultrasonic inspection technology with some advanced technologies, such as industrial control computer, virtual instrument, intelligent flaw detection, etc. With the careful programming flaw detection operation, it could evaluate correctly and select strictly for complex flaw echo, its error in alarm could be effectively avoided. The review of flaw echo waveform overcame insufficiency of flaw category identification in ultrasonic automatic inspection, and achieved misinformation rate being smaller than 2%, and fail to report rate being zero.%分析了焊接钢管超声波自动探伤系统的软件设计以及在焊接钢管检测中的应用状况.把传统的超声波检测技术和先进的工业控制计算机、虚拟仪器和智能化探伤等技术相结合,配合精心编制的探伤操作程序,可做到对复杂缺陷回波的准确评价和严格筛选,有效地避免了系统的误报警.缺陷波形回放功能克服了超声波自动探伤中的缺陷种类难以识别的不足,并做到误报率<2%,漏报率为0.

  14. Feed water distribution pipe replacement at Loviisa NPP

    Energy Technology Data Exchange (ETDEWEB)

    Savolainen, S.; Elsing, B. [Imatran Voima Loviisa NPP (Finland)

    1995-12-31

    Imatran Voima Oy operates two WWER-440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of feed water distribution (FWD) pipe were observed in 1989. The FWD-pipe T-connection had suffered from severe erosion corrosion damages. Similar damages have been been found also in other WWER-440 type NPPs. In 1989 the nozzles of the steam generator YB11 were inspected. No signs of the damages or signs of erosion were detected. The first damaged nozzles were found in 1992 in steam generators of both units. In 1992 it was started studying different possibilities to either repair or replace the damaged FWD-pipes. Due to the difficult conditions for repairing the damaged nozzles it was decided to study different FWD-pipe constructions. In 1991 two new feedwater distributors had been implemented at Dukovany NPP designed by Vitckovice company. Additionally OKB Gidropress had presented their design for new collector. In spring 1994 all the six steam generators of Rovno NPP unit 1 were replaced with FWD-pipes designed by OKB Gidropress. After the implementation an experimental program with the new systems was carried out. Due to the successful experiments at Rovno NPP Unit 1 it was decided to implement `Gidropress solution` during 1994 refueling outage into the steam generator YB52 at Loviisa 2. The object of this paper is to discuss the new FWD-pipe and its effects on the plant safety during normal and accident conditions. (orig.).

  15. The CoLaPipe--the new Cottbus large pipe test facility at Brandenburg University of Technology Cottbus-Senftenberg.

    Science.gov (United States)

    König, Franziska; Zanoun, El-Sayed; Öngüner, Emir; Egbers, Christoph

    2014-07-01

    The CoLaPipe is a novel test facility at the Department of Aerodynamics and Fluid Mechanics, Brandenburg University of Technology Cottbus-Senftenberg (BTU Cottbus-Senftenberg), set up to investigate fully developed pipe flow at high Reynolds numbers (Re(m) ⩽ 1.5 × 10(6)). The design of the CoLaPipe is closed-return with two available test sections providing a length-to-diameter ratio of L/D = 148 and L/D = 79. Within this work, we introduce the CoLaPipe and describe the various components in detail, i.e., the settling chamber, the inlet contraction, the blower, bends, and diffusers as well as the cooling system. A special feature is the numerically optimized contraction design. The applications of different measuring techniques such as hot-wire anemometry and static pressure measurements to quantitatively evaluate the mean flow characteristics and turbulence statistics are discussed as well. In addition, capabilities and limitations of available and new pipe flow facilities are presented and reconsidered based on their length-to-diameter ratio, the achieved Reynolds numbers, and the resulting spatial resolution. Here, the focus is on the facility design, the presentation of some basic characteristics, and its contribution to a reviewed list of specific questions still arising, e.g., scaling and structural behavior of turbulent pipe flow as well as the influence of the development length on turbulence investigations.

  16. Theoretical and Experimental Investigation of Flexural Wave Propagating in a Periodic Pipe with Fluid-Filled Loading

    Institute of Scientific and Technical Information of China (English)

    WEN Ji-Hong; SHEN Hui-Jie; YU Dian-Long; WEN Xi-Sen

    2010-01-01

    @@ Based on the Bragg scattering mechanism of phononic crystals(PCs),a periodic composite material pipe with fluid loading is designed and studied.The band structure of the flexural wave in the periodic pipe is calculated with the transfer matrix(TM)method.A periodic piping experimental system is designed,and the vibration experiment is performed to validate the attenuation ability of the periodic pipe structure.Finally,a finiteelement pipe model is constructed using the MSC-Actran software,and the calculated results match well with the vibration experiment.The errors between the theoretical calculation results and the vibration experimental results are analyzed.

  17. Deployable Pipe-Z

    Science.gov (United States)

    Zawidzki, Machi

    2016-10-01

    This paper presents a concept of deployable Pipe-Z (dPZ): a modular structural system which takes advantage of the robustness of rigid-panel mechanism and allows to create free-form links which are also reconfigurable and deployable. The concept presented can be applied for building habitats and infrastructures for human exploration of oceans and outer space. dPZ structures can adapt to changing requirements e.g. mission objectives, crew condition and technological developments. Furthermore, such lightweight and adaptable structural concept can assist in sustainable exploration development. After brief introduction, the concept of Pipe-Z (PZ) is presented. Next, the reconfigurability of PZ is explained and illustrated with continuous and collision-free transition from a PZ forming a Trefoil knot to a Figure-eight knot. The following sections introduce, explain and illustrate the folding mechanism of a single foldable Pipe-Z module (fPZM) and entire dPZ structure. The latter is illustrated with asynchronous (delayed) unfolding of a relatively complex Unknot. Several applications of PZ are suggested, namely for underwater and deep-space and surface habitats, for permanent, but in particular, temporary or emergency passages. As an example, a scenario of a failure of one of the modules of the International Space Station is presented where a rigid structure of 40 fPZMs bypasses the "dead link". A low-fidelity prototype of a 6-module octagonal dPZ is presented; several folding schemes including concentric toric rings are demonstrated. Practical issues of pressurization and packing are briefly discussed.

  18. Modeling of the effect of plasticity on the response of pipe systems to internal explosions

    NARCIS (Netherlands)

    Smeulers, J.P.M.; Pape, G.; Ligterink, N.E.

    2012-01-01

    Pipe systems that are used in the process industry may occasionally be subjected to internal deflagration and detonation waves. In those cases the design of the pipe system should be explosion resistant or even explosion proof. The usual design rule for the analysis of the mechanical response is bas

  19. Application of LBB to high energy piping systems in operating PWR

    Energy Technology Data Exchange (ETDEWEB)

    Swamy, S.A.; Bhowmick, D.C. [Westinghouse Nuclear Technology Division, Pittsburgh, PA (United States)

    1997-04-01

    The amendment to General Design Criterion 4 allows exclusion, from the design basis, of dynamic effects associated with high energy pipe rupture by application of leak-before-break (LBB) technology. This new approach has resulted in substantial financial savings to utilities when applied to the Pressurized Water Reactor (PWR) primary loop piping and auxiliary piping systems made of stainless steel material. To date majority of applications pertain to piping systems in operating plants. Various steps of evaluation associated with the LBB application to an operating plant are described in this paper.

  20. A Case Study in Teaching Pipes-and-filters and Batch Sequential Software Architectures

    Institute of Scientific and Technical Information of China (English)

    SUN Yu-shan; DING Jian-rui

    2012-01-01

    In this paper, a case study is carried out in comparison of pipes-and-filters architecture and batch sequential architecture. Concepts on a data flow system and the two mentioned architectures are presented. A Java template class design in implementing the "pipes" and "filters" in the pipes-and-filters architecture is given at the design level. Finally, this paper uses a concrete example to show how to use Java to implement the pipes- and-filters architecture. Using varied amount of data from text files, performance and memory usage of the two architectures are illustrated.

  1. Temperature fields across the BES III beam pipe

    Science.gov (United States)

    Zheng, Lifang; Wang, Li; Ji, Quan; Li, Xunfeng; Liu, Jianping

    2014-03-01

    During the operations of the new generation Beijing Electron and Positron Collider (BEPC II) and the Beijing Spectrometer (BES III), the inner surface of the beam pipe is subjected to high radiation heat loads. Continuous high temperatures or large temperature fluctuations can cause the main drift chamber (MDC) to detect particles abnormally. Hence, a beam pipe with a cooling system was designed, and temperature fields across the beam pipe and the MDC inner cylinder were studied experimentally and by finite-element simulations. When the inlet temperatures of the cooling oil and cooling water for the central and extended beam pipes were set to 291.4 K and 291.6 K, respectively, results showed that the inner surface temperature of the MDC inner cylinder can be controlled within the range of 292.8-293.9 K for various powers of radiation heat. This range satisfies the operating requirements of 293±2 K.

  2. Transient Behaviour of a Heat Pipe with Extracapillary Circulation

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Heat pipe devices, for their typical working mode, are particularly suitable for zero gravity applications, and have also been considered for applications in space satellites with nuclear generators because of the absence of active systems for the coolant circulation. The present work reports the results of experimental tests carried out on a heat pipe facility designed to investigate the thermal-hydraulic performance of a water heat pipe. The device layout, configuration and geometry, simulate a heat pipe working mode utilizable in space applications under zero gravity conditions. The evaporating section, completely lined (covered) with wicks (sintered stainless steel), and nearly plane shaped, is housed in a cylindrical container. The obtained results show that the system can approach steady-state conditions, at a pressure of 4 bar and with a heat flux transferred of about 150 W/cm2, supporting an electric power step of about 1.8 Kw.

  3. Experimental investigation of transitional flow in a toroidal pipe

    CERN Document Server

    Kühnen, J; Hof, B; Kuhlmann, H

    2015-01-01

    The flow instability and further transition to turbulence in a toroidal pipe (torus) with curvature (tube-to-coiling diameter) 0.049 is investigated experimentally. The flow inside the toroidal pipe is driven by a steel sphere fitted to the inner pipe diameter. The sphere is moved with constant azimuthal velocity from outside the torus by a moving magnet. The experiment is designed to investigate curved pipe flow by optical measurement techniques. Using stereoscopic particle image velocimetry, laser Doppler velocimetry and pressure drop measurements, the flow is measured for Reynolds numbers ranging from 1000 to 15000. Time- and space-resolved velocity fields are obtained and analysed. The steady axisymmetric basic flow is strongly influenced by centrifugal effects. On an increase of the Reynolds number we find a sequence of bifurcations. For Re=4075 a supercritical bifurcation to an oscillatory flow is found in which waves travel in the streamwise direction with a phase velocity slightly faster than the mean...

  4. Sodium Based Heat Pipe Modules for Space Reactor Concepts: Stainless Steel SAFE-100 Core

    Science.gov (United States)

    Martin, James J.; Reid, Robert S.

    2004-01-01

    A heat pipe cooled reactor is one of several candidate reactor cores being considered for advanced space power and propulsion systems to support future space exploration applications. Long life heat pipe modules, with designs verified through a combination of theoretical analysis and experimental lifetime evaluations, would be necessary to establish the viability of any of these candidates, including the heat pipe reactor option. A hardware-based program was initiated to establish the infrastructure necessary to build heat pipe modules. This effort, initiated by Los Alamos National Laboratory and referred to as the Safe Affordable Fission Engine (SAFE) project, set out to fabricate and perform non-nuclear testing on a modular heat pipe reactor prototype that can provide 100 kilowatt from the core to an energy conversion system at 700 C. Prototypic heat pipe hardware was designed, fabricated, filled, closed-out and acceptance tested.

  5. Heat Pipe Blocks Return Flow

    Science.gov (United States)

    Eninger, J. E.

    1982-01-01

    Metal-foil reed valve in conventional slab-wick heat pipe limits heat flow to one direction only. With sink warmer than source, reed is forced closed and fluid returns to source side through annular transfer wick. When this occurs, wick slab on sink side of valve dries out and heat pipe ceases to conduct heat.

  6. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  7. Temperature drops in heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Saatci, A.M.; Khalifa, A.M.A.; Akyurt, M.

    1986-01-01

    The role of entrainment in limiting heat pipe power handling capacity is discussed. The effect of entrainment on the measured temperature field in the integral heat pipe of a split system solar cooker is analyzed. An experimental set-up depicting a heat loop is presented, along with test results.

  8. Space qualification of high capacity grooved heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, M.; Mullender, B.; Druart, J. [SABCA, Societe Anomyme Belgel de Construction Aeronautique (Belgium); Supper, W.; Beddows, A. [ESTEC-The (Netherlands)

    1996-12-31

    Based on the thermal requirements of the future telecommunication satellites, the development of a High Capacity Grooved Heat Pipe (HPG), was contracted by ESA to SABCA leading to an aluminium extruded heat pipe (outer diameter of 25 mm) based on a multi re-entrant grooves design. After an intensive acceptance test campaign whose results showed a good confidence in the design and the fulfillment of the required specifications of heat transport and on tilt capability (experimental maximum heat transport capability of 1500 Watt metres for a vapour temperature of 20 deg C), similar heat pipes have been developed with various outer diameters (11 mm, 15 mm and 20 mm) and with various shapes (circular outer shapes, integrated saddles). Several of these heat pipes were tested during two parabolic flight campaigns, by varying the heat loads during the micro-gravity periods. This HGP heat pipe family is now being submitted to a space qualification program according to ESA standards (ESA PSS-49), both in straight and bent configuration. Within this qualification, the heat pipes are submitted to an extended test campaign including environmental (random/sinus vibration, constant acceleration) and thermal tests (thermal performance, thermal cycle, thermal soak, ageing). (authors) 9 refs.

  9. OTEC Cold Water Pipe-Platform Subsystem Dynamic Interaction Validation

    Energy Technology Data Exchange (ETDEWEB)

    Varley, Robert [Lockheed Martin Corporation, Manassas, VA (United States); Halkyard, John [John Halkyard and Associates, Houston, TX (United States); Johnson, Peter [BMT Scientific Marine Services, Inc., Houston, TX (United States); Shi, Shan [Houston Offshore Engineering, Houston, TX (United States); Marinho, Thiago [Federal Univ. of Rio de Janeiro (Brazil). LabOceano

    2014-05-09

    A commercial floating 100-megawatt (MW) ocean thermal energy conversion (OTEC) power plant will require a cold water pipe (CWP) with a diameter of 10-meter (m) and length of up to 1,000 m. The mass of the cold water pipe, including entrained water, can exceed the mass of the platform supporting it. The offshore industry uses software-modeling tools to develop platform and riser (pipe) designs to survive the offshore environment. These tools are typically validated by scale model tests in facilities able to replicate real at-sea meteorological and ocean (metocean) conditions to provide the understanding and confidence to proceed to final design and full-scale fabrication. However, today’s offshore platforms (similar to and usually larger than those needed for OTEC applications) incorporate risers (or pipes) with diameters well under one meter. Secondly, the preferred construction method for large diameter OTEC CWPs is the use of composite materials, primarily a form of fiber-reinforced plastic (FRP). The use of these material results in relatively low pipe stiffness and large strains compared to steel construction. These factors suggest the need for further validation of offshore industry software tools. The purpose of this project was to validate the ability to model numerically the dynamic interaction between a large cold water-filled fiberglass pipe and a floating OTEC platform excited by metocean weather conditions using measurements from a scale model tested in an ocean basin test facility.

  10. Flow Characteristics of a Pipe Diffuser for Centrifugal Compressors

    Directory of Open Access Journals (Sweden)

    Zhenzhong Sun

    2017-01-01

    Full Text Available The pipe diffuser, an efficient kind of radial bladed diffuser, is widely used in centrifugal compressors for gas turbine engines. This paper investigates flow characteristics of a pipe diffuser for centrifugal compressors by solving three-dimensional Reynolds-averaged Navier-Stokes equations. The results show that the pipe diffuser is adaptable to high Mach number incoming flows, and its unique leading edge could uniform the flow distortion. Numerical analysis indicates that the choke in pipe diffuser occurs suddenly, which leads to the dramatically steep performance curves near choke condition. Besides, it is found that the first half flow passage is particularly important to the pipe diffuser performance as it influences the choking behavior, the static pressure distribution, and the matching, so more attention should be paid to this region when designing or optimizing a pipe diffuser. Two counter-rotating vortices generated in the diffuser inlet region are captured by numerical simulation, and they can exist in the downstream of the diffuser passage. More detailed analysis show that these two vortices dominate the flow structure in the whole diffuser passage by shifting flow to certain positions and forming high-momentum flow cells and wake flow cells. The leading edge formed by the intersection of adjacent diffuser passages significantly affects this pair of vortices. In addition, these two vortices also affect the flow separation in pipe diffuser flow passages, they suppress separation near the front wall and back wall while facilitate separation at center locations. Therefore, it is recommended to design the leading edge of the pipe diffuser carefully to control the vortices and obtain a better flow field.

  11. 修井机二层台排管机械手虚拟样机设计%Virtual Prototype Design of Pipe-handling Robot on Racking Platform

    Institute of Scientific and Technical Information of China (English)

    朱海东; 祝克强; 谭海波

    2016-01-01

    为减少修井机二层台井架工的工作强度,设计了一套二层台排管机械手,用于替代人工完成危险的高空起下钻作业。借助仿真分析软件 ANSYS Workbench,分析了机械手在取管、送管过程中危险时间点时主要结构件的受力状况,以便及早发现和解决问题,为后续设计中的动力选型、结构改进提供数据支撑,并缩短了设计周期。%In order to reduce platform derrickmen frequent tripping operation,Racking Platform Pipe-handling Robot replaces derrickmen to handle the dangerous work in high altitude.In this paper,by means of ANSYS workbench analysis of manipulator in the whole process of taking out or in tube,the dangerous point in time is extracted when the stress of the main structure,in order to find and solve problems in early period,the subsequent dynamic selection was designed,which provide reliable data to support structure improvement,and the design cycle was shorten.

  12. THE DESIGN ERROR ESTIMATION OF THE HEAT TRANSFER RATE IN THE HEAT PIPE EXCHANGER%热管换热器换热量设计误差估算

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The deviations of the design indexes from the real values of heat exchanger performance are the matters of customer's and manufacturer's common concern. Up till now, the estimating method has no unifiable understanding. For this reason much controversy is often given rise to .This paper presents an estimating method for the design calculation error of the heat transfer rate in the heat pipe exchanger .Error theory is employed to investigate a practical example. Five error sources are found and the results of mathematical analysis are given.%换热器性能的设计指标与实际值偏差的大小,是用户和制造厂家共同关心的问题。目前对这种偏差的估算方法及估算值指标尚未形成共识,因此时有争议发生。本文提出了热管换热器换热量设计误差的估算方法,并以锅炉烟气余热回收装置中的重力热管换热器为例,运用误差理论进行分析计算,找出了产生换热量设计偏差的5个误差源,并给出了计算结果。

  13. A multifunctional heat pipe sandwich panel structure

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Wadley, Haydn N.G. [University of Virginia, Department of Materials Science and Engineering, 140 Chemistry Way, P.O. Box 400745, Charlottesville, VA 22904 (United States); Carbajal, Gerardo [University of Turabo, School of Engineering, P.O. Box 3030, Gurabo 00778 (Puerto Rico); Peterson, G.P. [University of Colorado at Boulder, 914 Broadway, Boulder, CO 80309 (United States)

    2008-01-15

    A multifunctional sandwich panel combining efficient structural load support and thermal management characteristics has been designed and experimentally assessed. The concept is based upon a truncated, square honeycomb sandwich structure. In closed cell honeycomb structures, the transport of heat from one face to the other occurs by a combination of conduction through the webs and convection/radiation within the cells. Here, much more effective heat transport is achieved by multifunctionally utilizing the core as a heat pipe sandwich panel. Its interior consists of a 6061 aluminum truncated-square honeycomb core covered with a stochastic open-cell nickel foam wick. An electroless nickel plating barrier layer inhibited the chemical reaction between the deionized water working fluid and the aluminum structure, retarding the generation of non-condensable hydrogen gas. A thermodynamic model was used to guide the design of the heat pipe sandwich panel. We describe the results of a series of experiments that validate the operational principle of the multifunctional heat pipe sandwich panel and characterize its transient response to an intense localized heat source. The systems measured thermal response to a localized heat source agrees well with that predicted by a finite difference method model used to predict the thermal response. (author)

  14. Determination of leakage areas in nuclear piping

    Energy Technology Data Exchange (ETDEWEB)

    Keim, E. [Siemens/KWU, Erlangen (Germany)

    1997-04-01

    For the design and operation of nuclear power plants the Leak-Before-Break (LBB) behavior of a piping component has to be shown. This means that the length of a crack resulting in a leak is smaller than the critical crack length and that the leak is safely detectable by a suitable monitoring system. The LBB-concept of Siemens/KWU is based on computer codes for the evaluation of critical crack lengths, crack openings, leakage areas and leakage rates, developed by Siemens/KWU. In the experience with the leak rate program is described while this paper deals with the computation of crack openings and leakage areas of longitudinal and circumferential cracks by means of fracture mechanics. The leakage areas are determined by the integration of the crack openings along the crack front, considering plasticity and geometrical effects. They are evaluated with respect to minimum values for the design of leak detection systems, and maximum values for controlling jet and reaction forces. By means of fracture mechanics LBB for subcritical cracks has to be shown and the calculation of leakage areas is the basis for quantitatively determining the discharge rate of leaking subcritical through-wall cracks. The analytical approach and its validation will be presented for two examples of complex structures. The first one is a pipe branch containing a circumferential crack and the second one is a pipe bend with a longitudinal crack.

  15. Optimum Pipe Size Selection for Turbulent Flow

    Directory of Open Access Journals (Sweden)

    Timothy A. AKINTOLA

    2009-07-01

    Full Text Available Pipelines are normally designed to deliver fluid at the required head and flow rate in a cost effective manner. Increase in conduit diameter leads to increase in annual capital costs, and decrease in operating costs. Selection of an optimum conduit diameter for a particular fluid flow will therefore be a vital economic decision. This paper presents a computer aided optimisation technique for determination of optimum pipe diameter for a number of idealized turbulent flow. Relationships were formulated connecting theories of turbulent fluid flow with pipeline costing. These were developed into a computer program, written in Microsoft Visual C++ language, for a high-level precision estimate of the optimum pipe diameter, through the least total cost approach. The validity of the program was ascertained through case studies, representative of fluids with different densities and compressibility. The optimum conduit diameter was found to increase linearly with increase in compressibility.

  16. Evaluation of cold bending and mechanical properties of helical (SAWH) and longitudinal (SAWL) seam pipes

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Gilmar Zacca; Sanandres, Simon Ricardo [PETROBRAS, Rio de Janeiro, RJ (Brazil). Pipeline Engineering Division; Pinto, Percy Saavedra; Mello, Marcelo [Tubos Soldados Atlantico, Sao Paulo, SP (Brazil)

    2009-07-01

    The present work is a part of a comprehensive program that aims to evaluate the helical seam pipe application in pipeline construction and compare with the traditional longitudinal seam pipe that have been used in Brazil. One of the biggest concerns is the cold bending process once the Brazilian land profile is very sinuous, different than other countries where helical seam pipes have been used successfully. At this work, two pipes were used, one helical seam and one longitudinal seam, both API 5L X70 with 28 inch of diameter and 0.469 inch wall thickness. The results of cold bending tests comparing both types of pipe and the mechanical properties from the straight pipe with the bend section are shown. The research methodology includes dimensional analysis, microstructural evaluation and mechanical tests that were performed on the straight pipe and bend areas. The cold bending parameters used to obtain a bend according the design and construction standards requirements are also presented. The results showed that the cold bending process produces a helical seam pipe bend with the most critical radius allowed by the standards, without presenting any evidence of wrinkles, out-of-roundness above the limits or any type of mechanical damage. Both pipes tested met the standards requirements in terms of bending and mechanical properties. The results of this study provide technical information for future helical seam pipe application in Brazil. (author)

  17. Analysis of Effect of Heat Pipe Parameters in Minimising the Entropy Generation Rate

    Directory of Open Access Journals (Sweden)

    Rakesh Hari

    2016-01-01

    Full Text Available Heat transfer and fluid flow in the heat pipe system result in thermodynamic irreversibility generating entropy. The minimum entropy generation principle can be used for optimum design of flat heat pipe. The objective of the present work is to minimise the total entropy generation rate as the objective function with different parameters of the flat heat pipe subjected to some constraints. These constraints constitute the limitations on the heat transport capacity of the heat pipe. This physical nonlinear programming problem with nonlinear constraints is solved using LINGO 15.0 software, which enables finding optimum values for the independent design variables for which entropy generation is minimum. The effect of heat load, length, and sink temperature on design variables and corresponding entropy generation is studied. The second law analysis using minimum entropy generation principle is found to be effective in designing performance enhanced heat pipe.

  18. Fracture behavior of short circumferentially surface-cracked pipe

    Energy Technology Data Exchange (ETDEWEB)

    Krishnaswamy, P.; Scott, P.; Mohan, R. [Battelle, Columbus, OH (United States)] [and others

    1995-11-01

    This topical report summarizes the work performed for the Nuclear Regulatory Comniission`s (NRC) research program entitled ``Short Cracks in Piping and Piping Welds`` that specifically focuses on pipes with short, circumferential surface cracks. The following details are provided in this report: (i) material property deteminations, (ii) pipe fracture experiments, (iii) development, modification and validation of fracture analysis methods, and (iv) impact of this work on the ASME Section XI Flaw Evaluation Procedures. The material properties developed and used in the analysis of the experiments are included in this report and have been implemented into the NRC`s PIFRAC database. Six full-scale pipe experiments were conducted during this program. The analyses methods reported here fall into three categories (i) limit-load approaches, (ii) design criteria, and (iii) elastic-plastic fracture methods. These methods were evaluated by comparing the analytical predictions with experimental data. The results, using 44 pipe experiments from this and other programs, showed that the SC.TNP1 and DPZP analyses were the most accurate in predicting maximum load. New Z-factors were developed using these methods. These are being considered for updating the ASME Section XI criteria.

  19. Potential Of Light Pipes System In Malaysian Climate

    Science.gov (United States)

    Abd Kadir, Aslila; Hakim Ismail, Lokman; Kasim, Narimah; Kaamin, Masiri

    2016-11-01

    Light-pipes system are simple structures that allow the transmission of daylight from the outside to the inside of a room. It is a practical application in many buildings where daylight cannot reach due to building design and limited facade to placing windows. Since roof is the element directly exposed to the sunlight, light pipes system could be introduced. This paper examines the illumination levels obtained using light pipes system under Malaysia climate conditions. A light-pipe system that was installed in a test room located in Batu Pahat. Indoor illuminance distributions and concurrent outdoor illuminance were monitored at a 30 minutes interval for 5 days. The results indicated that the amount of daylight penetrated into the building are varied with less than 150lux in the early morning and late evening, and maximum at over 350lux in the noon and early afternoon. The average internal illuminance levels offer by light pipe system met the MS 1525:2007 recommendation for application in Malaysian buildings. These findings indicated that the light pipe system has a potential as a tool for introducing daylight indoors in Malaysia.

  20. Effect of pipe sags on wastewater collection system performance.

    Science.gov (United States)

    Sever, V Firat; Foust, Henry

    2011-04-01

    Sagging of pipelines is a common problem in centralized wastewater collection systems. Wastewater flowing through sags experiences several changes of slope, and the flow through flat and negative slope sections is prone to a significant reduction in mean velocity. The objective of this study is to determine when pipe sags would result in significant velocities below design conditions, which also would increase the risk of a sewer backup. A sagged pipe configuration that could be encountered in sanitary sewer systems was depicted; thereby, analyses on uniform and gradually varied flows were conducted to determine velocity profiles through different segments of the sagged pipeline setup used for the study. The results indicate that there are significant occurrences when either the velocity in the pipe sags goes below minimum, as recommended in the Ten States Standards (Health Research, Inc., 2004) (0.61 m/s [2.0 ft/ sec]), or flow depth rises to pipe diameter (full section flow). Additionally, velocities along a sagged pipe were calculated for temporal flow rates to account for daily and seasonal flow rate changes in a typical wastewater collection system. Results of the temporal flow rate analysis suggest that, for a 200-mm (8-in.) diameter sagged pipe segment with full-section (wet weather) flow, 75% of the mean velocities would be below the minimum velocity recommended as a Ten States Standard.

  1. 46 CFR 95.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.15-15 Section 95.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 95.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  2. 46 CFR 108.475 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.475 Section 108.475 Shipping COAST GUARD... Extinguishing Systems Foam Extinguishing Systems § 108.475 Piping. (a) Each pipe, valve, and fitting in a foam... to remove liquid from the system. (e) Piping in a foam extinguishing system must be used only...

  3. 14 CFR 27.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 27.1123 Section 27.1123... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Exhaust System § 27.1123 Exhaust piping. (a) Exhaust piping... operating temperatures. (b) Exhaust piping must be supported to withstand any vibration and inertia loads...

  4. 46 CFR 197.336 - Pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure piping. 197.336 Section 197.336 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.336 Pressure piping. Piping systems that... must— (a) Meet the ANSI Code; (b) Have the point of connection to the integral piping system of...

  5. 46 CFR 64.95 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping. 64.95 Section 64.95 Shipping COAST GUARD... SYSTEMS Cargo Handling System § 64.95 Piping. (a) Piping, valves, flanges, and fittings used in the... the piping system must comply with § 56.60-25(c) of this chapter....

  6. 46 CFR 76.23-20 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.23-20 Section 76.23-20 Shipping COAST GUARD... System, Details § 76.23-20 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  7. 46 CFR 95.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.17-15 Section 95.17-15 Shipping COAST GUARD... Extinguishing Systems, Details § 95.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of Subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  8. 46 CFR 76.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.17-15 Section 76.17-15 Shipping COAST GUARD... Systems, Details § 76.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  9. 46 CFR 193.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.15-15 Section 193.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 193.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  10. Investigation of high-frequency pipe welding

    Science.gov (United States)

    Konovalov, Nikolai A.; Lakhno, Nikolay I.; Gushchin, A. G.; Putryk, N. D.; Kovalenko, Vladimir I.; Galkina, V. A.; Veselovsky, Vladimir B.; Furmanov, Valeri B.; Kovika, Nikolai D.; Novikov, Leonid V.; Shcherbina, V. N.

    1993-01-01

    For investigation of a pipe welding process at high-frequency heating aimed at increasing of pipe quality and decreasing of spoilage, the use of high-speed recording and TV-technique is considered to be effective. The authors have created a visual inspection system for pipe welding process studies at a tube mill of the Novomoskovsk Pipe Plant.

  11. 49 CFR 192.281 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.281 Section 192.281... Plastic pipe. (a) General. A plastic pipe joint that is joined by solvent cement, adhesive, or heat fusion may not be disturbed until it has properly set. Plastic pipe may not be joined by a threaded joint...

  12. 49 CFR 192.55 - Steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Steel pipe. 192.55 Section 192.55 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.55 Steel pipe. (a) New steel pipe is... in accordance with paragraph (c) or (d) of this section. (b) Used steel pipe is qualified for use...

  13. Finned Carbon-Carbon Heat Pipe with Potassium Working Fluid

    Science.gov (United States)

    Juhasz, Albert J.

    2010-01-01

    This elemental space radiator heat pipe is designed to operate in the 700 to 875 K temperature range. It consists of a C-C (carbon-carbon) shell made from poly-acrylonitride fibers that are woven in an angle interlock pattern and densified with pitch at high process temperature with integrally woven fins. The fins are 2.5 cm long and 1 mm thick, and provide an extended radiating surface at the colder condenser section of the heat pipe. The weave pattern features a continuous fiber bath from the inner tube surface to the outside edges of the fins to maximize the thermal conductance, and to thus minimize the temperature drop at the condenser end. The heat pipe and radiator element together are less than one-third the mass of conventional heat pipes of the same heat rejection surface area. To prevent the molten potassium working fluid from eroding the C C heat pipe wall, the shell is lined with a thin-walled, metallic tube liner (Nb-1 wt.% Zr), which is an integral part of a hermetic metal subassembly which is furnace-brazed to the inner surface of the C-C tube. The hermetic metal liner subassembly includes end caps and fill tubes fabricated from the same Nb-1Zr alloy. A combination of laser and electron beam methods is used to weld the end caps and fill tubes. A tungsten/inert gas weld seals the fill tubes after cleaning and charging the heat pipes with potassium. The external section of this liner, which was formed by a "Uniscan" rolling process, transitions to a larger wall thickness. This section, which protrudes beyond the C-C shell, constitutes the "evaporator" part of the heat pipe, while the section inside the shell constitutes the condenser of the heat pipe (see figure).

  14. Survey of strong motion earthquake effects on thermal power plants in California with emphasis on piping systems. Volume 2, Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J.D. [Stevenson and Associates, Cleveland, OH (United States)

    1995-11-01

    Volume 2 of the ``Survey of Strong Motion Earthquake Effects on Thermal Power Plants in California with Emphasis on Piping Systems`` contains Appendices which detail the detail design and seismic response of several power plants subjected to strong motion earthquakes. The particular plants considered include the Ormond Beach, Long Beach and Seal Beach, Burbank, El Centro, Glendale, Humboldt Bay, Kem Valley, Pasadena and Valley power plants. Included is a typical power plant piping specification and photographs of typical power plant piping specification and photographs of typical piping and support installations for the plants surveyed. Detailed piping support spacing data are also included.

  15. Loop Heat Pipe Startup Behaviors

    Science.gov (United States)

    Ku, Jentung

    2016-01-01

    A loop heat pipe must start successfully before it can commence its service. The startup transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe startup behaviors. Topics include the four startup scenarios, the initial fluid distribution between the evaporator and reservoir that determines the startup scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power startup, and methods to enhance the startup success. Also addressed are the pressure spike and pressure surge during the startup transient, and repeated cycles of loop startup and shutdown under certain conditions.

  16. Energy transfer mechanism and probability analysis of submarine pipe laterally impacted by dropped objects

    Science.gov (United States)

    Liang, Jing; Yu, Jian-xing; Yu, Yang; Lam, W.; Zhao, Yi-yu; Duan, Jing-hui

    2016-06-01

    Energy transfer ratio is the basic-factor affecting the level of pipe damage during the impact between dropped object and submarine pipe. For the purpose of studying energy transfer and damage mechanism of submarine pipe impacted by dropped objects, series of experiments are designed and carried out. The effective yield strength is deduced to make the quasi-static analysis more reliable, and the normal distribution of energy transfer ratio caused by lateral impact on pipes is presented by statistic analysis of experimental results based on the effective yield strength, which provides experimental and theoretical basis for the risk analysis of submarine pipe system impacted by dropped objects. Failure strains of pipe material are confirmed by comparing experimental results with finite element simulation. In addition, impact contact area and impact time are proved to be the major influence factors of energy transfer by sensitivity analysis of the finite element simulation.

  17. Numerical investigation on the axial interaction between buried district heating pipes and soil

    Energy Technology Data Exchange (ETDEWEB)

    Weidlich, Ingo; Achmus, Martin

    2008-09-15

    Pipe-soil interaction has to be taken into account in the design of district heating (DH) pipes. The investigation presented here focuses on the effect of the reduction of axial friction forces due to cyclic axial displacements and the corresponding stress redistribution. Calculations with a three-dimensional finite element model were carried out in which a standard situation of a buried DH pipe was studied. A significant reduction of friction with cyclic axial displacements was obtained, although no temperature loading and thus no radial expansion of the pipe was considered. The reason for the friction force decrease is a densification of the soil beneath the pipe, which leads to a decrease of the normal stress acting between pipe and soil.

  18. Stress analysis of the O-element pipe during the process of flue gases purification

    Directory of Open Access Journals (Sweden)

    Nekvasil R.

    2008-11-01

    Full Text Available Equipment for flue gases purification from undesired substances is used throughout power and other types of industry. This paper deals with damaging of the O-element pipe designed to remove sulphur from the flue gases, i.e. damaging of the pipe during flue gases purification. This purification is conducted by spraying the water into the O-shaped pipe where the flue gases flow. Thus the sulphur binds itself onto the water and gets removed from the flue gas. Injection of cold water into hot flue gases, however, causes high stress on the inside of the pipe, which can gradually damage the O-element pipe. In this paper initial injection of water into hot pipe all the way to stabilization of temperature fields will be analyzed and the most dangerous places which shall be considered for fatigue will be determined.

  19. Specialist meeting on leak before break in reactor piping and vessels

    Energy Technology Data Exchange (ETDEWEB)

    Bartholome, G.; Bazant, E.; Wellein, R. [Siemens KWU, Stuttgart (Germany)] [and others

    1997-04-01

    A series of research projects sponsored by the Federal Minister for Education, Science, Research and Technology, Bonn are summarized and compared to utility, manufacturer, and vendor tests. The purpose of the evaluation was to experimentally verify Leak-before-Break behavior, confirm the postulation of fracture preclusion for piping (straight pipe, bends and branches), and quantify the safety margin against massive failure. The results are applicable to safety assessment of ferritic and austenitic piping in primary and secondary nuclear power plant circuits. Moreover, because of the wide range of the test parameters, they are also important for the design and assessment of piping in other technical plant. The test results provide justification for ruling out catastrophic fractures, even on pipes of dimensions corresponding to those of a main coolant pipe of a pressurized water reactor plant on the basis of a mechanical deterministic safety analysis in correspondence with the Basis Safety Concept (Principle of Fracture Exclusion).

  20. A MODEL FOR PREDICTING PHASE INVERSION IN OIL-WATER TWO-PHASE PIPE FLOW

    Institute of Scientific and Technical Information of China (English)

    GONG Jing; LI Qing-ping; YAO Hai-yuan; YU Da

    2006-01-01

    Experiments of phase inversion characteristics for horizontal oil-water two-phase flow in a stainless steel pipe loop (25.7 mm inner diameter,52 m long) are conducted. A new viewpoint is brought forward about the process of phase inversion in oil-water two-phase pipe flow. Using the relations between the total free energies of the pre-inversion and post-inversion dispersions, a model for predicting phase inversion in oil-water two-phase pipe flow has been developed that considers the characteristics of pipe flow. This model is compared against other models with relevant data of phase inversion in oil-water two-phase pipe flow. Results indicate that this model is better than other models in terms of calculation precision and applicability. The model is useful for guiding the design for optimal performance and safety in the operation of oil-water two-phase pipe flow in oil fields.

  1. Inner-pipe structure to improve column heterogeneity and peak shape.

    Science.gov (United States)

    Hu, Di; Mei, Xiang; Shi, Pengchao; Zhou, Xin

    2015-04-01

    Column heterogeneity plays an important role in peak tailing and asymmetric profiles. We have designed a novel column structure (concentric column structure) that has a concentric inner-pipe nested in a column. This structure was studied by a number calculation method and wider diameter column experiments. The results showed that column heterogeneity and column efficiency were improved by inner-pipe structure. Moreover, the results showed that high-efficiency columns were stronger influenced by inner-pipe structure than low-efficiency columns. The influence of an inner-pipe was related to its size. The optimal inner-pipe diameter was nearly 0.625 times of column diameter. By using inner-pipe structure in this way, it was possible to decrease column heterogeneity and increase column efficiency of a wide-diameter column. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  2. Reliability and Sensitivity Analysis of Cast Iron Water Pipes for Agricultural Food Irrigation

    Directory of Open Access Journals (Sweden)

    Yanling Ni

    2014-07-01

    Full Text Available This study aims to investigate the reliability and sensitivity of cast iron water pipes for agricultural food irrigation. The Monte Carlo simulation method is used for fracture assessment and reliability analysis of cast iron pipes for agricultural food irrigation. Fracture toughness is considered as a limit state function for corrosion affected cast iron pipes. Then the influence of failure mode on the probability of pipe failure has been discussed. Sensitivity analysis also is carried out to show the effect of changing basic parameters on the reliability and life time of the pipe. The analysis results show that the applied methodology can consider different random variables for estimating of life time of the pipe and it can also provide scientific guidance for rehabilitation and maintenance plans for agricultural food irrigation. In addition, the results of the failure and reliability analysis in this study can be useful for designing of more reliable new pipeline systems for agricultural food irrigation.

  3. A Lift-Off-Tolerant Magnetic Flux Leakage Testing Method for Drill Pipes at Wellhead

    Science.gov (United States)

    Wu, Jianbo; Fang, Hui; Li, Long; Wang, Jie; Huang, Xiaoming; Kang, Yihua; Sun, Yanhua; Tang, Chaoqing

    2017-01-01

    To meet the great needs for MFL (magnetic flux leakage) inspection of drill pipes at wellheads, a lift-off-tolerant MFL testing method is proposed and investigated in this paper. Firstly, a Helmholtz coil magnetization method and the whole MFL testing scheme are proposed. Then, based on the magnetic field focusing effect of ferrite cores, a lift-off-tolerant MFL sensor is developed and tested. It shows high sensitivity at a lift-off distance of 5.0 mm. Further, the follow-up high repeatability MFL probing system is designed and manufactured, which was embedded with the developed sensors. It can track the swing movement of drill pipes and allow the pipe ends to pass smoothly. Finally, the developed system is employed in a drilling field for drill pipe inspection. Test results show that the proposed method can fulfill the requirements for drill pipe inspection at wellheads, which is of great importance in drill pipe safety. PMID:28117721

  4. A Lift-Off-Tolerant Magnetic Flux Leakage Testing Method for Drill Pipes at Wellhead

    Directory of Open Access Journals (Sweden)

    Jianbo Wu

    2017-01-01

    Full Text Available To meet the great needs for MFL (magnetic flux leakage inspection of drill pipes at wellheads, a lift-off-tolerant MFL testing method is proposed and investigated in this paper. Firstly, a Helmholtz coil magnetization method and the whole MFL testing scheme are proposed. Then, based on the magnetic field focusing effect of ferrite cores, a lift-off-tolerant MFL sensor is developed and tested. It shows high sensitivity at a lift-off distance of 5.0 mm. Further, the follow-up high repeatability MFL probing system is designed and manufactured, which was embedded with the developed sensors. It can track the swing movement of drill pipes and allow the pipe ends to pass smoothly. Finally, the developed system is employed in a drilling field for drill pipe inspection. Test results show that the proposed method can fulfill the requirements for drill pipe inspection at wellheads, which is of great importance in drill pipe safety.

  5. Optimizing design for equipment cooling pipe of segment of slab caster%板坯连铸机扇形段机冷配管的改进设计

    Institute of Scientific and Technical Information of China (English)

    周士凯; 田进; 王蓉; 李新强; 薛松

    2013-01-01

    The original cooling pipe of segment for R steel plant slab CCM is welded with stainless steel rectangular tubes.Its disadvantages embodied in the complex structure,the large cost of manufacturing and repair,low service life,and difficulty to repair the water leakage.Based on the improved design,intergranular corrosion caused by Heat treatment is avoided,iron scrap is avoided into the tubes,and its service life is prolonged,its structure is more simple and more convenient to repair.%R钢厂板坯连铸机扇形段原机冷配管由不锈钢矩形管焊接而成,结构复杂,维修制造成本大,使用寿命低,漏水后修复难.通过对其结构改进设计,避免了不锈钢管路随框架进行热处理而引起的晶间腐蚀,避免了铁屑进入矩形管内,延长了其使用寿命,结构简化,维修更方便.

  6. The Design Research of a New-Type Steel Pipe Communication Tower%一种新型钢管通信塔的设计实践研究

    Institute of Scientific and Technical Information of China (English)

    于送洋

    2012-01-01

    Communication Tower ofLuchao Port in Donghai Bridge in Shanghai is a steel pipe tower with a new structural type. The height of the tower is 90.75 meters, all is assembled with tubes. The shape of the tower is differrent from the conventional tower it looks like a people erecting next to the East China Sea Bridge. There are four different sections of the total structure of the tower. In the design stage, some achievement after the research and optimization about the type of the tower, the calculation of the wind force, the analysis of the structure and the conformation of the joints are got.%上海东海大桥芦潮港综合通信塔采用了一种新型钢管结构的塔型.塔高90.75m,全钢管结构,全塔结构分为四个区段.此塔造型采用了有别于常规塔型的结构形式,立面外形成人字形竖立在东海大桥旁,在设计过程中,对结构形式、风荷载计算、结构分析及节点构造等进行了研究和优化,取得了较为理想的成果.

  7. Effect of Nanofluids on Heat Pipe Thermal Performance: A Review of the Recent Literature

    Directory of Open Access Journals (Sweden)

    Navid Bozorgan

    2013-09-01

    Full Text Available The addition of the nanoparticles to the base fluid is one of the significant issues to enhance the heat transfer of heat pipes. The purpose of this review is to summarize the research done on heat pipes using nanofluids as working fluids in recent years (2012 to 2013. The peer reviewed papers published in citation index journals have been selected for review in this paper. This review article provides additional information for the design of heat pipes with optimum conditions regarding the heat transfer characteristics of nanofluids in heat pipes. Moreover, this paper identifies several important issues that should be considered further in future works.

  8. Chinese water-pipe smoking and the risk of COPD.

    Science.gov (United States)

    She, Jun; Yang, Ping; Wang, Yuqi; Qin, Xinyu; Fan, Jia; Wang, Yi; Gao, Guangsuo; Luo, Guangxiong; Ma, Kaixiang; Li, Baoyan; Li, Caihua; Wang, Xiangdong; Song, Yuanlin; Bai, Chunxue

    2014-10-01

    Studies show that the incidence of COPD has remained high in southwest China despite the 1976 National Stove Improvement Program for indoor air quality. Chinese water-pipe tobacco smoking (commonly referred to as water-pipe smoking), which is thought to be less harmful under the assumption that no charcoal is used and water filters tobacco smoke, is popular in China. We investigated whether Chinese water-pipe use and exposure are associated with the risk of COPD. This multicenter, cross-sectional study enrolled 1,238 individuals from 10 towns in the Fuyuan area, Yunnan Province, China. A matched design was used to estimate the impact of active and passive exposure to Chinese water-pipe smoking on COPD risk; multivariate analyses adjusted for other risk factors. We also collected the water from Chinese water pipes to assess the mutagenicity of its major components and simulated Chinese water-pipe smoke exposure fine particulate 2.5 (PM2.5) by using the High Volume Air Sampler and individuals' sera to search for the potential protein biomarkers of COPD. The increased risk of COPD was profound for Chinese water-pipe smokers (adjusted OR, 10.61; 95% CI, 6.89-16.34), Chinese water-pipe passive smokers (adjusted OR, 5.50; 95% CI, 3.61-8.38), cigarette smokers (adjusted OR, 3.18; 95% CI, 2.06-4.91), and cigarette passive smokers (adjusted OR, 2.52; 95% CI, 1.62-3.91) compared with never-smoking control subjects. Chinese water-pipe use aggravates lungs with more PM2.5 compared with cigarettes. ChemR23 and tissue inhibitor of metalloproteinase-1 may be potential protein biomarkers of COPD. Chinese water-pipe smoking significantly increases the risk of COPD, including the risk to women who are exposed to the water-pipe smoke. Chinese Clinical Trial Registry; No.: ChiCTR-CCH-12002235; URL: www.chictr.org/cn/

  9. Morbidity profile of steel pipe production workers

    Directory of Open Access Journals (Sweden)

    Pandit Kirti

    2008-01-01

    Full Text Available Objective: To study the different morbid conditions among steel pipe producing workers. Methods: The present cross-sectional study has been carried out among the workers of one of the steel pipes and tubes manufacturing factory of Gujarat. Hundred workers from the four major departments of the steel pipe production plant, namely welding, pressing machine, X-ray welding and loading/transportation department were covered. The information regarding demographic, occupational, clinical characteristics and diagnosis were recorded on a pre-designed proforma. Statistical analysis included calculation of percentages and proportions and was carried out using the statistical software Epi Info Version 3.3.2. Results: The mean age of the study subjects was found to be 38.7±7.1 years. The mean duration of exposure was found to be 9.0±3.4 years. Forty-four percent of the subjects had an upper respiratory tract infection, as evidenced by symptoms like dry cough, cough with rhinitis and cough with fever. Symptoms suggestive of allergic bronchitis were observed in 12% of the subjects while symptoms suggestive of heat stress such as prickly heat, dehydration, perspiration and pyrexia were observed in 13% of the subjects.

  10. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  11. B Plant process piping replacement feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  12. Waste heat recovery using looped heat pipes for air cooling

    Energy Technology Data Exchange (ETDEWEB)

    Lamfon, N.J.; Akyurt, M.; Najjar, Y.S.H. (King Abdulaziz Univ., Jeddah (Saudi Arabia). Mechanical Engineering Dept.)

    1994-07-01

    A scheme is described for the recovery of waste heat from stacks of gas turbine engines and the utilization of recovered energy for the cooling of ambient air. Relationships are summarized for the modeling of components of the cooling system. Samples are presented from performance data that is predicted by the model. Effect of size and design of system components, as well as operational variables on system performance, are discussed. It is concluded that the single most significant variable in the design of the looped heat-pipe recovery and utilization system is the geometry of the exhaust pipe of the gas turbine engine. (author)

  13. Creep-fatigue Interaction Research under High Temperature Condition of Fast Reactor Sodium Pipe

    Institute of Scientific and Technical Information of China (English)

    HU; Li-na

    2015-01-01

    The working temperature of the pipe in primary loop cooling system and decay heat remove system of China Experimental Fast Reactor(CEFR)is higher than material creep temperature(427℃).The design life of the reactor is30a.The pipe works under the repeated thermal load and mechanical load at run time.In order to

  14. ANALYSIS OF THE PERFORMANCE OF THE BURIED PIPE GRID OF A HEAT PUMP,

    Science.gov (United States)

    An analysis is presented of experimental records obtained from a buried pipe grid of a heat pump , operated over a full heating season. The purpose of the analysis is to compare actual pipe performance with theory over a long period of time, thereby judging the applicability of the theory for practical use and to indicate the suitability of simplified design methods. (Author)

  15. The Exergetic, Environmental and Economic Effect of the Hydrostatic Design Static Pressure Level on the Pipe Dimensions of Low-Energy District Heating Networks

    Directory of Open Access Journals (Sweden)

    Hakan İbrahim Tol

    2013-01-01

    Full Text Available Low-Energy District Heating (DH systems, providing great energy savings by means of very low operating temperatures of 55 °C and 25 °C for supply and return respectively, were considered to be the 4th generation of the DH systems for a low-energy future. Low-temperature operation is considered to be used in a low-energy DH network to carry the heat produced by renewable and/or low grade energy sources to low-energy Danish buildings. In this study, a comparison of various design considerations with different levels of maximum design static pressures was performed, and their results evaluated in terms of energetic, exergetic, economic, and environmental perspectives.

  16. Efficient methods of piping cleaning

    OpenAIRE

    Orlov Vladimir Aleksandrovich; Nechitaeva Valentina Anatol'evna; Bogomolova Irina Olegovna; Shaykhetdinova Yuliya Aleksandrovna; Daminova Yuliya Farikhovna

    2014-01-01

    The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of d...

  17. 桁架式跨河管架的优化设计及地震可靠性评价%Design Optimization and Seismic Reliability Analysis of Truss-type River-crossing Pipe Rack

    Institute of Scientific and Technical Information of China (English)

    俞然刚; 庄向仕; 周金顺; 朱海

    2013-01-01

    Oil and gas pipeline construction persists throughout China on national and regional levels.Because many barriers are encountered such as rivers,lakes,mountains,canyons,other construction,and unstable strata,access through and across these barriers are important in oil pipeline engineering design.Thus,construction reliability,safety,and economic impact have been studied.In cross projects,truss-type river-crossing pipe rack is a common form of medium-sized cross-projects because it has a simple structure,is light weight,and provides a convenient way to repair pipelines with ample space.The structure design optimization and seismic reliability analysis of truss-type river-crossing pipe racks are related to the overall performance and safe operation of pipeline structures.In this study,two scenarios of rectangular and inverted triangle truss structures were respectively optimized by using ANSYS parameter design language and a design optimization module,and the optimization results were analyzed to determine the most optimal solution.By simulating the structure's earthquake response,seismic performance analysis was conducted,and the structure of anti-seismic reliability was obtained through reliability analysis for optimal structure design.The optimization results show that the height of the truss increases in the optimization process; however,the width is reduced.In addition,the diameter of pole gradually decreases in the process.The total weight of the structure rapidly reduces with rod cross-section reduction;reduction is rapid in the first three optimization cycles and slows from 54 tons to 25 tons after 10 optimization cycles to maintain a weight of 18.532 t.The analysis of internal force and largest structural displacement show that the structures make full use of material mechanics capability and that the appropriate increase in structural height and decrease in structural width are favorable to the structure.Optimization results show that the two types of

  18. Corrosion behavior in heat pipe

    Directory of Open Access Journals (Sweden)

    Anurak Rodbumrung

    2016-01-01

    Full Text Available The aim of this study was to perform life testing and determine the effect of working fluid on the corrosion of a heat pipe with a sintered wick. The heat pipe was made from a copper tube. The inner heat pipe was filled with 99.97% pure copper powder as a dendritic for the sintering process. The heat pipe had an outer diameter of 6 mm with a length of 200 mm, and distilled water and ethanol were the working fluids. The operating temperature at the evaporator was 125°C. The analysis consisted of using a scanning electron microscope, energy dispersive X-ray spectrometry and atomic absorption spectroscopy. The results of the scanning electron microscope and energy dispersive X-ray spectrometry analysis showed that the corrosion of the heat pipe was uniform. The result of the atomic absorption spectroscopy indicated that the concentration of the copper in the ethanol as the working fluid was greater than in the distilled water as the working fluid, and the highest concentration of copper particles in the ethanol was 22.7499 ppm or 0.0409 mg after testing for 3000 h. The concentration of copper was higher when the length of the life test increased due to corrosion of the heat pipe.

  19. Seismic fragility test of a 6-inch diameter pipe system

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W. P.; Onesto, A. T.; DeVita, V.

    1987-02-01

    This report contains the test results and assessments of seismic fragility tests performed on a 6-inch diameter piping system. The test was funded by the US Nuclear Regulatory Commission (NRC) and conducted by ETEC. The objective of the test was to investigate the ability of a representative nuclear piping system to withstand high level dynamic seismic and other loadings. Levels of loadings achieved during seismic testing were 20 to 30 times larger than normal elastic design evaluations to ASME Level D limits would permit. Based on failure data obtained during seismic and other dynamic testing, it was concluded that nuclear piping systems are inherently able to withstand much larger dynamic seismic loadings than permitted by current design practice criteria or predicted by the probabilistic risk assessment (PRA) methods and several proposed nonlinear methods of failure analysis.

  20. Conceptual design of a device for charging PIG's batteries, using the hydraulic energy from the flow in pipe

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, Ricardo E.; Dutra, Max S. [Alberto Luiz Coimbra Institute for Graduate and Research Studies (COPPE-UFRJ), Rio de Janeiro, RJ (Brazil). Mechanical Engineering Program], e-mail: rramirez@ufrj.br, e-mail: max@mecanica.coppe.ufrj.br

    2009-07-01

    Some actual projects deal with development of PIGs with speed control for liquid pipelines, with the possibility of controlled displacement including counter flow locomotion, in order to inspect and service in 'unpiggable lines' and flexible lines. In this case, it is normal to carry energy consumption greater than the energy disposable in the batteries. This work proposes a device composed by a turbine and an electric generator; presents a preliminary mechanical design of the turbine for the specific requirements of the application like internal pressure inside the line, a range of relative velocities between the PIG and the pipeline and adequate material for the environmental conditions. One of the priority requirements is that the geometric form of the turbine and generator mate with a proposed form of the PIG minimizing the pressure drop in the line for the different work conditions. The electric design defines the magnets characteristics, geometric forms, dimensions and number of turns to obtain the required voltage and power for charging a nominal pack of batteries. (author)

  1. Crack stability analysis of low alloy steel primary coolant pipe

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, T.; Kameyama, M. [Kansai Electric Power Company, Osaka (Japan); Urabe, Y. [Mitsubishi Heavy Industries, Ltd., Takasago (Japan)] [and others

    1997-04-01

    At present, cast duplex stainless steel has been used for the primary coolant piping of PWRs in Japan and joints of dissimilar material have been applied for welding to reactor vessels and steam generators. For the primary coolant piping of the next APWR plants, application of low alloy steel that results in designing main loops with the same material is being studied. It means that there is no need to weld low alloy steel with stainless steel and that makes it possible to reduce the welding length. Attenuation of Ultra Sonic Wave Intensity is lower for low alloy steel than for stainless steel and they have advantageous inspection characteristics. In addition to that, the thermal expansion rate is smaller for low alloy steel than for stainless steel. In consideration of the above features of low alloy steel, the overall reliability of primary coolant piping is expected to be improved. Therefore, for the evaluation of crack stability of low alloy steel piping to be applied for primary loops, elastic-plastic future mechanics analysis was performed by means of a three-dimensioned FEM. The evaluation results for the low alloy steel pipings show that cracks will not grow into unstable fractures under maximum design load conditions, even when such a circumferential crack is assumed to be 6 times the size of the wall thickness.

  2. Experimental investigation on Heat Transfer Performance of Annular Flow Path Heat Pipe

    Energy Technology Data Exchange (ETDEWEB)

    Kim, In Guk; Kim, Kyung Mo; Jeong, Yeong Shin; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)

    2015-05-15

    Mochizuki et al. was suggested the passive cooling system to spent nuclear fuel pool. Detail analysis of various heat pipe design cases was studied to determine the heat pipes cooling performance. Wang et al. suggested the concept PRHRS of MSR using sodium heat pipes, and the transient performance of high temperature sodium heat pipe was numerically simulated in the case of MSR accident. The meltdown at the Fukushima Daiichi nuclear power plants alarmed to the dangers of station blackout (SBO) accident. After the SBO accident, passive decay heat removal systems have been investigated to prevent the severe accidents. Mochizuki et al. suggested the heat pipes cooling system using loop heat pipes for decay heat removal cooling and analysis of heat pipe thermal resistance for boiling water reactor (BWR). The decay heat removal systems for pressurized water reactor (PWR) were suggested using natural convection mechanisms and modification of PWR design. Our group suggested the concept of a hybrid heat pipe with control rod as Passive IN-core Cooling System (PINCs) for decay heat removal for advanced nuclear power plant. Hybrid heat pipe is the combination of the heat pipe and control rod. In the present research, the main objective is to investigate the effect of the inner structure to the heat transfer performance of heat pipe containing neutron absorber material, B{sub 4}C. The main objective is to investigate the effect of the inner structure in heat pipe to the heat transfer performance with annular flow path. ABS pellet was used instead of B{sub 4}C pellet as cylindrical structures. The thermal performances of each heat pipes were measured experimentally. Among them, concentric heat pipe showed the best performance compared with others. 1. Annular evaporation section heat pipe and annular flow path heat pipe showed heat transfer degradation. 2. AHP also had annular vapor space and contact cooling surface per unit volume of vapor was increased. Heat transfer

  3. Polyurethane coating for ductile iron pipes

    Directory of Open Access Journals (Sweden)

    WANG En-qing

    2006-05-01

    Full Text Available A special polyurethane coating designed for ductile iron pipe was developed. The effects of the ingredients on properties, such as viscosity, flow leveling, solidification-rate, adhesion and hardness, were researched. It was then analyzed in what ways the technical parameters, such as temperature and pressure, influence the coat quality. The results showed that the molar ratio and synthesizing conditions must be strictly controlled to obtain suitable pre-polymer viscosity by adjusting the formula ratio of the B component, satisfactory mechanical properties and cure rate can be obtained and bubbles in the coat can be avoided.

  4. SEALING LARGE-DIAMETER CAST-IRON PIPE JOINTS UNDER LIVE CONDITIONS

    Energy Technology Data Exchange (ETDEWEB)

    Kiran M. Kothari; Gerard T. Pittard

    2005-07-01

    Utilities in the U.S. operate over 75,000 km (47,000 miles) of old cast-iron pipes for gas distribution. Bell-and-spigot joints that connect pipe sections together tend to leak as these pipes age. Current repair practices are costly and highly disruptive. The objective of this program is to design, test and commercialize a robotic system capable of sealing multiple castiron bell and spigot joints from a single pipe entry point. The proposed system will perform repairs with the pipe in service by traveling through the pipe, cleaning each joint surface, and installing a stainless-steel sleeve lined with an epoxy-impregnated felt across the joint. This approach will save considerable time and labor, minimize excavation, avoid traffic disruption, and eliminate any requirement to interrupt service to customers (which would result in enormous expense to utilities). Technical challenges include: (1) repair sleeves must compensate for diametric variation and eccentricity of old cast-iron pipes; (2) the assembly must travel long distances through pipes containing debris; (3) the pipe wall must be effectively cleaned in the immediate area of the joint to assure good bonding of the sleeve; and (4) an innovative bolt-on entry fitting is required to conduct safe repair operations on live mains.

  5. Energy and exergy evaluation of an integrated solar heat pipe wall system for space heating

    Indian Academy of Sciences (India)

    ROONAK DAGHIGH; ABDELLAH SHAFIEIAN

    2016-08-01

    In this paper, an integrated solar heat pipe wall space heating system, employing double glazed heat pipe evacuated tube solar collector and forced convective heat transfer condenser, is introduced. Thermal performance of the heat pipe solar collector is studied and a numerical model is developed to investigate thethermal efficiency of the system, the inlet and outlet air temperatures and heat pipe temperature. Furthermore, the system performance is evaluated based on exergy efficiency. In order to verify the precision of the developed model, the numerical results are compared with experimental data. Parametric sensitivity for design features and material associated with the heat pipe, collector cover and insulation is evaluated to provide a combination with higher thermal performance. Simulation results show that applying a solar collector with more than 30 heat pipes is not efficient. The rate of increasing in temperature of air becomes negligible after 30 heat pipes and the trend of the thermal efficiency is descending with increasing heat pipes. The results also indicate that at a cold winter day of January, the proposed system with a 20 heat pipe collector shows maximum energy and exergy efficiency of 56.8% and 7.2%, which can afford warm air up to 30°C. At the end, the capability of the proposed system tomeet the heating demand of a building is investigated. It is concluded that the best method to reach a higher thermal covered area is to apply parallel collectors

  6. 多逻辑通道DMA快速启动的设计与优化%Design and Optimization of Start-up of Multi Logic Pipe DMA

    Institute of Scientific and Technical Information of China (English)

    胡月安; 马胜; 陈书明; 张帅

    2015-01-01

    The DMA startup time is one of the important indexes for evaluating the performance of the DMA design. Number of synchro-nization events of DMA in multi-core system has huge increase compared with DMA in single-core system to influence DMA startup time. In the query of DMA synchronization events,using the traditional token ring approach not only consumes long start-up time but al-so possesses much randomness. In order to reduce the startup time of DMA,introduce a round robin arbiter method which querying syn-chronization events only need 1 cycle. Besides,in the design of DMA startup,bypass is set so as to eliminate the process of logic channel writing into event queues,ultimately the start-up time of DMA is reduced to five cycle,compared with the traditional DMA,startup speed is greatly improved. In this paper,describe a DMA start design method,highly analyzing the main factors affecting the DMA startup time, elaborating the realization of the token ring and round robin arbiter used to query synchronization events,and analyzing the condition of choosing the bypass.%DMA启动时间是评估DMA设计优劣的重要指标之一。在多核系统中,由于DMA需要响应的同步触发事件相对单核中DMA有大量的增加而影响到DMA的启动时间。在查询DMA同步事件时采用传统的令牌环方式不仅消耗的启动时间长而且还有很大的随机性。为了优化DMA的启动时间,在DMA查询同步事件时,文中采用轮转仲裁的方式实现了单周期查询到同步触发事件。此外,在设计结构上通过设置旁路的方式避免了逻辑通道写入事件队列的过程,最终使得DMA启动时间降低到5周期,相对采用传统DMA的启动速度有了较大提高。文中介绍了DMA启动设计实现方法,深入分析了影响DMA启动时间的主要因素,详细说明了令牌环和轮转仲裁的实现原理以及旁路的选择判断条件。

  7. Multi-terminal pipe routing by Steiner minimal tree and particle swarm optimisation

    Science.gov (United States)

    Liu, Qiang; Wang, Chengen

    2012-08-01

    Computer-aided design of pipe routing is of fundamental importance for complex equipments' developments. In this article, non-rectilinear branch pipe routing with multiple terminals that can be formulated as a Euclidean Steiner Minimal Tree with Obstacles (ESMTO) problem is studied in the context of an aeroengine-integrated design engineering. Unlike the traditional methods that connect pipe terminals sequentially, this article presents a new branch pipe routing algorithm based on the Steiner tree theory. The article begins with a new algorithm for solving the ESMTO problem by using particle swarm optimisation (PSO), and then extends the method to the surface cases by using geodesics to meet the requirements of routing non-rectilinear pipes on the surfaces of aeroengines. Subsequently, the adaptive region strategy and the basic visibility graph method are adopted to increase the computation efficiency. Numeral computations show that the proposed routing algorithm can find satisfactory routing layouts while running in polynomial time.

  8. Electrically heated pipe in pipe system for hydrate prevention on the Campos Basin

    Energy Technology Data Exchange (ETDEWEB)

    Euphemio, Mauro; Montesanti, Jose Ricardo; Braganca, Elton Jorge; Almeida, Murilo Mesquita de; Coelho, Eduardo; Maia, Alexandre Rodrigues; Peres, Marcelo Borges [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    This paper will refer briefly to some key aspects considered for the design of an Electrically Heated Pipe-in-Pipe- EHPIP system integrated to an Electric Submersible Pump-ESP, to be located at 1800 m water depth in the Campos Basin. In this system, under normal operation the well will be producing through the ESP and in case of long well shut in and during well restart up, a percentage of the electrical power will be delivered to heat the PIP system. The electrical system will have a common sub sea power cable and an Electrical Switch Module, to switch power alternatively to the heating system or to the pump. The systems will not operate simultaneously. (author)

  9. 一种新型热管固体除湿系统的设计与应用分析%Design and Application Analysis of a New Heat Pipe Dehumidification System

    Institute of Scientific and Technical Information of China (English)

    牛永红; 郭宁

    2016-01-01

    The current dehumidification system is mostly single and inefficient and the energy utilization is relatively low .In this paper a new solid dehumidification system of a heat pipe and absorption refrigeration is studied and the dehumidification and energy efficiency is improved .The absorption refrigeration is used for cooling condensing heat during dehumidification , which can effectively improve the efficiency of the adsorbent dehumidifier .The absorption refrigeration uses low -grade waste heat ,such as afterheat and waste heat ,with a wide range of energy use .Therefore ,the newly designed solid desic-cant dehumidification system has a high heat transfer efficiency ,energy saving and high efficiency dehumidifying .%目前的除湿系统大多单一 ,除湿效率不高 ,能源的利用率也相对较低.研究了一种热管与吸收式制冷的新型固体吸附除湿系统 ,提高了除湿效率和能源利用率.采用吸收式制冷对除湿过程中产生的吸附热进行降温 ,从而有效地提高吸附剂的除湿效率.吸收式制冷利用工厂余热和废热等低品位热源 ,对能源的利用范围很广.设计的系统是一种传热效率高、节能、除湿效率高的新型固体吸附除湿系统.

  10. Software Design and Application of Automatic Ultrasonic Inspection System for Welded Pipe%焊接钢管超声波自动探伤检测系统的软件设计与应用

    Institute of Scientific and Technical Information of China (English)

    常少文

    2011-01-01

    In this article, the software design and application current status of automatic ultrasonic inspection system for welded pipe were analyzed. Combined traditional ultrasonic non-destructive inspection technology with some advanced technologies, such as industrial control computer, virtual instrument, intelligent flaw detection and so on, through flaw detection operational procedure, the complex flaw echo can be evaluated accurately and selected strictly. This will effectively avoid error alarm; the flaw waveform playback can overcome insufficiency of identifying flaw type. The field service proved that the false alarm rate is lower 2%, and the missing report rate is 0.%分析了焊接钢管超声波自动探伤检测系统的软件设计以及在焊接钢管检测中的应用状况.该系统把传统的超声波无损检测技术和先进的工业控制计算机、虚拟仪器、智能化探伤等技术相结合,通过探伤操作程序,可实现对复杂缺陷回波的准确评价和严格筛选,有效地避免了系统的误报警,而且其缺陷波形回放克服了超声波自动探伤检测中的缺陷种类难以识别的不足.现场使用证明该系统误报率小于2%,漏报率为0.

  11. Development and Manufacture of Cost-Effective Composite Drill Pipe

    Energy Technology Data Exchange (ETDEWEB)

    James C. Leslie

    2008-12-31

    Advanced Composite Products and Technology, Inc. (ACPT) has developed composite drill pipe (CDP) that matches the structural and strength properties of steel drill pipe, but weighs less than 50 percent of its steel counterpart. Funding for the multiyear research and development of CDP was provided by the U.S. Department of Energy Office of Fossil Energy through the Natural Gas and Oil Projects Management Division at the National Energy Technology Laboratory (NETL). Composite materials made of carbon fibers and epoxy resin offer mechanical properties comparable to steel at less than half the weight. Composite drill pipe consists of a composite material tube with standard drill pipe steel box and pin connections. Unlike metal drill pipe, composite drill pipe can be easily designed, ordered, and produced to meet specific requirements for specific applications. Because it uses standard joint connectors, CDP can be used in lieu of any part of or for the entire steel drill pipe section. For low curvature extended reach, deep directional drilling, or ultra deep onshore or offshore drilling, the increased strength to weight ratio of CDP will increase the limits in all three drilling applications. Deceased weight will reduce hauling costs and increase the amount of drill pipe allowed on offshore platforms. In extreme extended reach areas and high-angle directional drilling, drilling limits are associated with both high angle (fatigue) and frictional effects resulting from the combination of high angle curvature and/or total weight. The radius of curvature for a hole as small as 40 feet (12.2 meters) or a build rate of 140 degrees per 100 feet is within the fatigue limits of specially designed CDP. Other properties that can be incorporated into the design and manufacture of composite drill pipe and make it attractive for specific applications are corrosion resistance, non-magnetic intervals, and abrasion resistance coatings. Since CDP has little or no electromagnetic force

  12. Brittle fracture in casing pipes; Sproeda brott i mantelroer

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Stefan; Thoernblom, Kristian; Saellberg, Sven-Erik; Bergstroem, Gunnar [Swedish National Testing and Research Inst., Goeteborg (Sweden)

    2005-05-01

    Rapid Crack Propagation (RCP) has been observed in the casing pipe of large diameter district heating pipes on several occasions. An RCP crack is driven by hoop stresses in the casing pipe wall. It is a problem during installation work in cold weather. The casing pipe material is more brittle in low temperatures, and a temperature decrease will cause a hoop stress build-up since the thermal contraction of the casing pipe is constrained by the steel pipe and the PUR foam. RCP fracture has been documented at temperatures around -18 deg C but has likely, at some instances, occurred already at few degrees below 0 deg C. Three different polyethylene materials were evaluated with respect to the risk for brittle fracture of the casing pipe. One unimodal material of PE80 quality which have been used in casing to a large extent previously, one modern unimodal PE80 material which is used today and, finally, a bimodal PE80 material of a quality which currently is the dominant choice among pipe producers. Modern materials are in general much more resistant to brittle fracture, since it is an important design property for the raw material producers. Tests were done on casing of both large (up to 630 mm in diameter) and small (160 mm) dimension. A handling test was made where the pipes were cooled down and worked on with power tools in a manner similar to actual field work. An RCP fracture occurred at -25 deg C during cutting with angle grinder on a pipe with a diameter of 500 mm on the modern unimodal PE80 material. The same material also fractured during impact testing according to EN 253 at -20 deg C on both small and large diameter pipes. The bimodal PE80 resin passed both tests without fracture. A series of impact tests were done on pipes with diameter 160 mm with the purpose of determining critical temperatures and temperature stress levels with respect to brittle fracture. The results show that the bimodal material is so resistant that there is no real risk for RCP in

  13. Advances in Integrated Heat Pipe Technology for Printed Circuit Boards

    NARCIS (Netherlands)

    Wits, Wessel W.; Riele, te Gert Jan

    2010-01-01

    Designing thermal control systems for electronic products has become very challenging due to the continuous miniaturization and increasing performance demands. Two-phase cooling solutions, such as heat pipes or vapor chambers, are increasingly used as they offer higher thermal coefficients for heat

  14. Heat pipes. Citations from the NTIS data base

    Science.gov (United States)

    Reed, W. E.

    1980-04-01

    Theory, design, fabrication, testing, and operation of heat pipes are presented in these Federally sponsored research reports. Applications are described in the areas of heating and air conditioning, power generation, electronics cooling, spacecraft, nuclear reactors, cooling engines, and thermodynamics. This updated bibliography contains 70 abstracts, all of which are new entries to the previous edition.

  15. 33 CFR 157.222 - Pump and piping arrangements.

    Science.gov (United States)

    2010-07-01

    ... OIL IN BULK Dedicated Clean Ballast Tanks on Tank Vessels Design and Equipment § 157.222 Pump and piping arrangements. (a) Dedicated clean ballast tanks must be connected to the least practicable: (1... each dedicated clean ballast tank must be arranged so that oily water does not enter any...

  16. 46 CFR 119.450 - Vent pipes for fuel tanks.

    Science.gov (United States)

    2010-10-01

    ... flame arresters. The flame screens must consist of a single screen of corrosion resistant wire of at least 30×30 mesh. The flame screens or flame arresters must be of such size and design as to prevent... screens or arrester elements. (e) Where a flexible vent pipe section is necessary, suitable...

  17. Capillary Pump Loop (CPL) heat pipe development status report

    Science.gov (United States)

    1982-01-01

    The capillary pump loop (CPL) was re-introduced as a potential candidate for the management of large heat loads. It is currently being evaluated for application in the thermal management of large space structures. Test efforts were conducted to establish the feasibility of the CPL heat pipe design.

  18. Development and Manufacture of Cost Effective Composite Drill Pipe

    Energy Technology Data Exchange (ETDEWEB)

    James C. Leslie; James C. Leslie, II; Lee Truong; James T. Heard

    2006-09-29

    This technical report presents the engineering research, process development and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report presents progress made from October 1, 2005 through September 30, 2006 and contains the following discussions: Qualification Testing; Prototype Development and Testing of ''Smart Design'' Configuration; Field Test Demonstration; Development of Ultra-Short Radius Composite Drill Pipe (USR-CDP); and Development of Smart USR-CDP.

  19. Simulation of Welding of Thin-Walled Pipe

    Directory of Open Access Journals (Sweden)

    Marek GEBAUER

    2013-12-01

    Full Text Available The presented paper deals with the residual stress after a welding operation performed by using the TIG method. It was necessary to determine whether or not tension plays a major role in the distortion of the geometry of a thin-walled pipe, or in other words, whether the drawing dimension of the ovality exceeds the specified tolerance. The result of this simulation will help to determine whether or not designers will have to find another technological solution to complete parts. The assembly consists of three parts: the weld bead, thin-walled pipe, and hoop, which are connected by welds as a final product.

  20. Development of solutions to benchmark piping problems. [EPIPE code

    Energy Technology Data Exchange (ETDEWEB)

    Reich, M.; Chang, T.Y.; Prachuktam, S.

    1976-01-01

    Piping analysis is one of the most extensive engineering efforts required for the design of nuclear reactors. Such analysis is normally carried out by use of computer programs which can handle complex piping geometries and various loading conditions, (static or dynamic). A brief outline is presented of the theoretical background for the EPIPE program, together with four benchmark problems: two for the static case and two for the dynamic case. The results obtained from EPIPE runs compare well with those available from known analytical solutions or from other independent computer programs.

  1. Intermittent duty solar refrigerator assisted by heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hindi, R.R.; Khalifa, A.M.A.; Akyurt, M.

    1988-01-01

    The design of a solar operated intermittent-duty aqua-ammonia type of absorption refrigerator is described. The generator is heated by an integral acetone heat pipe, the evaporator of which is in the form of a low-thermal-mass flat plate collector. The condenser is air cooled. The absorber is likewise cooled via a second R22 heat-pipe system by convection/radiation panels. Initial test results for the collector-generator loop are reported for a single-glazed collector. A discussion of overall performance is presented.

  2. Structural evaluation report of piping and support structure for HANARO hot-water layer system

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Jeong Soo

    1997-02-01

    The major goal of this report is to assess the structural integrity on the piping and the support structures of HANARO hot-water layer system. The piping stress analysis was performed by using ADLPIPE program for the pipings subjected to dead weight, pressure, thermal expansion and seismic loadings. The pipings to evaluate the structural integrity are the pump suction line and the pump discharge line near safety related structures in reactor pool. Based on the reaction forces from the piping stress analysis, the design of support structure was carried out. The results of structural evaluation for the piping and the support structure showed that the structural acceptance criteria were satisfied, in compliance with ASME B and PV code, section III, subsection ND for the pipings and Subsection NF for the support structures. Therefore based on results of the analysis and the design, the structural integrity on the piping and the support structures of HANARO hot-water layer system proved. (author). 9 tabs., 14 figs. 9 refs.

  3. Insoluble Coatings for Stirling Engine Heat Pipe Condenser Surfaces

    Science.gov (United States)

    Dussinger, Peter M.; Lindemuth, James E.

    1997-01-01

    The principal objective of this Phase 2 SBIR program was to develop and demonstrate a practically insoluble coating for nickel-based superalloys for Stirling engine heat pipe applications. Specific technical objectives of the program were: (1) Determine the solubility corrosion rates for Nickel 200, Inconel 718, and Udimet 72OLI in a simulated Stirling engine heat pipe environment, (2) Develop coating processes and techniques for capillary groove and screen wick structures, (3) Evaluate the durability and solubility corrosion rates for capillary groove and screen wick structures coated with an insoluble coating in cylindrical heat pipes operating under Stirling engine conditions, and (4) Design and fabricate a coated full-scale, partial segment of the current Stirling engine heat pipe for the Stirling Space Power Convertor program. The work effort successfully demonstrated a two-step nickel aluminide coating process for groove wick structures and interior wall surfaces in contact with liquid metals; demonstrated a one-step nickel aluminide coating process for nickel screen wick structures; and developed and demonstrated a two-step aluminum-to-nickel aluminide coating process for nickel screen wick structures. In addition, the full-scale, partial segment was fabricated and the interior surfaces and wick structures were coated. The heat pipe was charged with sodium, processed, and scheduled to be life tested for up to ten years as a Phase 3 effort.

  4. Radiative heat transfer estimation in pipes with various wall emissivities

    Science.gov (United States)

    Robin, Langebach; Christoph, Haberstroh

    2017-02-01

    Radiative heat transfer is usually of substantial importance in cryogenics when systems are designed and thermal budgeting is carried out. However, the contribution of pipes is commonly assumed to be comparably low since the warm and cold ends as well as their cross section are fairly small. Nevertheless, for a first assessment of each pipe rough estimates are always appreciated. In order to estimate the radiative heat transfer with traditional “paper and pencil“ methods there is only one analytical case available in literature - the case of plane-parallel plates. This case can only be used to calculate the theoretical lower and the upper asymptotic values of the radiative heat transfer, since pipe wall radiation properties are not taken into account. For this paper we investigated the radiative heat transfer estimation in pipes with various wall emissivities with the help of numerical simulations. Out of a number of calculation series we could gain an empirical extension for the used approach of plane-parallel plates. The model equation can be used to carry out enhanced paper and pencil estimations for the radiative heat transfer through pipes without demanding numerical simulations.

  5. Seismic response analysis of a piping system subjected to multiple support excitations in a base isolated NPP building

    Energy Technology Data Exchange (ETDEWEB)

    Surh, Han-Bum [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Korea Atomic Energy Research Institute, 989-111 Daedeok-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Ryu, Tae-Young; Park, Jin-Sung [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Ahn, Eun-Woo; Choi, Chul-Sun [Korea Electric Power Corporation Engineering & Construction Company, Inc., 2354 Yonggu-daero, Giheung-gu, Yongin 446-713 (Korea, Republic of); Koo, Ja Choon [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Choi, Jae-Boong [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); SKKU Advanced Institute of Nanotechnology, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Kim, Moon Ki, E-mail: mkkim@me.skku.ac.kr [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); SKKU Advanced Institute of Nanotechnology, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of)

    2015-10-15

    Highlights: • Piping system in the APR 1400 NPP with a base isolation design is studied. • Seismic response of piping system in base isolated building are investigated. • Stress classification method is examined for piping subjected to seismic loading. • Primary stress of piping is reduced due to base isolation design. • Substantial secondary stress is observed in the main steam piping. - Abstract: In this study, the stress response of the piping system in the advanced power reactor 1400 (APR 1400) with a base isolation design subjected to seismic loading is addressed. The piping system located between the auxiliary building with base isolation and the turbine building with a fixed base is considered since it can be subjected to substantial relative support movement during seismic events. First, the support responses with respect to the base characteristic are investigated to perform seismic analysis for multiple support excitations. Finite element analyses are performed to predict the piping stress response through various analysis methods such as the response spectrum, seismic support movement and time history method. To separately evaluate the inertial effect and support movement effect on the piping stress, the stress is decomposed into a primary and secondary stress using the proposed method. Finally, influences of the base isolation design on the piping system in the APR 1400 are addressed. The primary stress based on the inertial loading is effectively reduced in a base isolation design, whereas a considerable amount of secondary stress is generated in the piping system connecting a base isolated building with a fixed base building. It is also confirmed that both the response spectrum analysis and seismic support movement analysis provide more conservative estimations of the piping stress compared to the time history analysis.

  6. Thermal Performance of a Heat Pipe for Hybrid Control Rod in Advanced In-core Decay Heat Removal System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Mo; Jeong, Yeong Shin; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    In this research, an innovative hybrid heat pipe system is designed for advanced in-core decay heat removal concept. Heat pipe is a device that transfer heat from pipe's hotter end to the colder end by phase change and convection of working fluid. The concept of the hybrid heat pipe system is that the control rod can have not only the original function of neutron absorber but also the function of the heat removal. If the function of heat pipe is applied to the control rods, the limited heat removal capacity can be extended because control rods are inserted to the reactor at initial state of accident using gravitational force. The neutron absorber-based heat pipe is designed to apply them to nuclear systems. However, thermosyphon and heat pipe are competitive as passive decay heat removal device in large scale. Thus, stainless steel 316L thermosyphon and heat pipe having sheath outer diameter of 3/4 inch (17.4 mm inner diameter), and the length of 1000 mm were tested. Effects on whether there is a wick structure on the heat pipe or not on the heat removal capacity were studied. To confirm the heat removal capacity of heat pipe, and heat transfer coefficient were measured for each specimen.

  7. Miniaturised Optical Fibre Sensor for Dew Detection Inside Organ Pipes

    Directory of Open Access Journals (Sweden)

    Francesco Baldini

    2008-01-01

    Full Text Available A new optical sensor for the continuous monitoring of the dew formation inside organ pipes was designed. This aspect is particularly critical for the conservation of organs in unheated churches since the dew formation or the condensation on the pipe surfaces can contribute to many kinds of physical and chemical disruptive mechanisms. The working principle is based on the change in the reflectivity which is observed on the surface of the fibre tip, when a water layer is formed on its distal end. Intensity changes of the order of 35% were measured, following the formation of the water layer on the distal end of a 400/430 μm optical fibre. Long-term tests carried out placing the fibre tip inside the base of an in-house-made metallic foot of an organ pipe located in an external environment revealed the consistency of the proposed system.

  8. A VAM thread for line pipe J-LAY operations

    Energy Technology Data Exchange (ETDEWEB)

    Peter, Jean-Pierre [Vallourec Mannesmann Oil and Gas, Boulogne (France)

    2000-07-01

    Following increasing demand for line pipe in deep sea water, Bouygues Off-Shore and Vallourec Mannesmann Oil and Gas France have decided to develop and promote an innovative VAM threaded connection, to be implemented according to J-Lay method. The paper is addressing first the application that we decided to cover. The designed solution and its specificities compared to standard premium threads for vertical completions is described in detail. The qualification process of the product to confirm its leak tightness performance envelope and to validate its operational performances is presented. Finally, the paper is providing the running and pipe laying procedures of such concept and is giving inputs to a general trade-off between a conventional welded solution and such 'threaded line pipe' option. (author)

  9. 广东省惠州市金山污水处理厂配套管网一期建设工程设计实例%The Construction Project Design Example of Jinshan Sewage Treatment Plant Pipe Network Supporting Phase I in the Huizhou City of Guangdong Province

    Institute of Scientific and Technical Information of China (English)

    周赋

    2014-01-01

    According to the design experience of phase I of the construction project of the Jinshan sewage treatment plant pipe network supporting in Guangdong Province Huizhou City, introduces points in the network design process of the data colection, scheme design, design and construction processing difficulties, puts forward the experience in engineering design, to provide references for designers.%本文根据广东省惠州市金山污水处理厂配套管网一期建设工程的设计经验,介绍了管网设计过程中的资料收集、方案设计、设计施工难点处理等要点,对工程设计提出经验总结,供设计人员参考。

  10. 46 CFR 61.15-5 - Steam piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam piping. 61.15-5 Section 61.15-5 Shipping COAST... Periodic Tests of Piping Systems § 61.15-5 Steam piping. (a) Main steam piping shall be subjected to a.... If the covering of the piping is not removed, the test pressure shall be maintained on the piping...

  11. 49 CFR Appendix B to Part 192 - Qualification of Pipe

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Qualification of Pipe B Appendix B to Part 192... Pipe I. Listed Pipe Specifications API 5L—Steel pipe, “API Specification for Line Pipe” (incorporated by reference, see § 192.7). ASTM A53/A53M—Steel pipe, “Standard Specification for Pipe, Steel Black...

  12. Heat pipe central solar receiver. Volume I. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Bienert, W. B.; Wolf, D. A.

    1979-04-01

    The objective of this project was the conceptual design of a Central Solar Receiver Gas Turbine Plant which utilizes a high temperature heat pipe receiver. Technical and economic feasibility of such a plant was to be determined and preliminary overall cost estimates obtained. The second objective was the development of the necessary heat pipe technology to meet the requirements of this receiver. A heat pipe receiver is ideally suited for heating gases to high temperatures. The heat pipes are essentially loss free thermal diffusers which accept a high solar flux and transform it to a lower flux which is compatible with heat transferred to gases. The high flux capability reduces receiver heating surface, thereby reducing receiver heat losses. An open recuperative air cycle with a turbine inlet temperature of 816/sup 0/C (1500/sup 0/F) was chosen as the baseline design. This results in peak metal temperatures of about 870/sup 0/C (1600/sup 0/F). The receiver consists of nine modular panels which form the semicircular backwall of a cavity. Gas enters the panels at the bottom and exits from the top. Each panel carries 637 liquid metal heat pipes which are mounted at right angle to the gas flow. The evaporators of the heat pipes protrude from the flux absorbing front surface of the panels, and the finned condensors traverse the gas stream. Capital cost estimates were made for a 10 MW(e) pilot plant. The total projected costs, in mid-1978 dollars, range from $1,947 to $2,002 per electrical kilowatt. On the same basis, the cost of a water/steam solar plant is approximately 50% higher.

  13. Introduction to Loop Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Loop Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. This course will discuss operating principles and performance characteristics of a loop heat pipe. Topics include: 1) pressure profiles in the loop; 2) loop operating temperature; 3) operating temperature control; 4) loop startup; 4) loop shutdown; 5) loop transient behaviors; 6) sizing of loop components and determination of fluid inventory; 7) analytical modeling; 8) examples of flight applications; and 9) recent LHP developments.

  14. Leak before break evaluation for main steam piping system made of SA106 Gr.C

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Kyoung Mo; Jee, Kye Kwang; Pyo, Chang Ryul; Ra, In Sik [Korea Power Engineering Company, Seoul (Korea, Republic of)

    1997-04-01

    The basis of the leak before break (LBB) concept is to demonstrate that piping will leak significantly before a double ended guillotine break (DEGB) occurs. This is demonstrated by quantifying and evaluating the leak process and prescribing safe shutdown of the plant on the basis of the monitored leak rate. The application of LBB for power plant design has reduced plant cost while improving plant integrity. Several evaluations employing LBB analysis on system piping based on DEGB design have been completed. However, the application of LBB on main steam (MS) piping, which is LBB applicable piping, has not been performed due to several uncertainties associated with occurrence of steam hammer and dynamic strain aging (DSA). The objective of this paper is to demonstrate the applicability of the LBB design concept to main steam lines manufactured with SA106 Gr.C carbon steel. Based on the material properties, including fracture toughness and tensile properties obtained from the comprehensive material tests for base and weld metals, a parametric study was performed as described in this paper. The PICEP code was used to determine leak size crack (LSC) and the FLET code was used to perform the stability assessment of MS piping. The effects of material properties obtained from tests were evaluated to determine the LBB applicability for the MS piping. It can be shown from this parametric study that the MS piping has a high possibility of design using LBB analysis.

  15. 46 CFR 169.652 - Bilge piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge piping. 169.652 Section 169.652 Shipping COAST... Electrical Bilge Systems § 169.652 Bilge piping. (a) All vessels of 26 feet in length and over must be... than 120 feet in length the bilge pipe must be not less than one and one-half inches. Piping on...

  16. China Steel Pipes Demand Rising Steadily

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Steel pipes industry is an industry to play a decisive role in the national economic development. During the Tenth Five-Year Plan period, the steel pipes output has been increased distinctly. Based on experts forecast,the steel pipes demand in China will still be in tendency of increase during the Eleventh FiveYear Plan period, which will doubtlessly bring new opportunity and challenge to the steel pipes enterprises in China.

  17. 46 CFR 76.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.15-15 Section 76.15-15 Shipping COAST GUARD... Extinguishing Systems, Details § 76.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 p.s.i. (b) All piping, in nominal sizes not over 3/4 inch, shall be...

  18. Assessment of the integrity of welded pipes

    OpenAIRE

    Šarkoćević, Živče; Arsić, Miodrag; Sedmak, Aleksandar; MEĐO, Bojan; Mišić, Milan; id_orcid 0000-0003-0550-1851

    2014-01-01

    The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on pipes withdrawn from exploatation after 70 000 hours at service. Defect influence of the surface crack on the integrity of pipes was tested using hydrostatic pressure of pipes with axial surface crack in the base material. Fracture behaviour was tested using modified compact ...

  19. BIMORPH PIEZOELECTRIC ACTUATOR FOR SMALL PIPE ROBOT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An experimental bimorph piezoelectric element (PZT) actuator for small pipe robot is developed. The robotcan move in φ 20 mm pipe, and can carry a CCD camera for detecting cracks or fine holes on inner surface of pipe. Thevelocity of the robot can reach 17~22 mm/s for vertical pipe up/down, respectively. Moving principle and its perfor-mance characteristics are presented.

  20. Analysis of Municipal Pipe Network Franchise Institution

    Science.gov (United States)

    Yong, Sun; Haichuan, Tian; Feng, Xu; Huixia, Zhou

    Franchise institution of municipal pipe network has some particularity due to the characteristic of itself. According to the exposition of Chinese municipal pipe network industry franchise institution, the article investigates the necessity of implementing municipal pipe network franchise institution in China, the role of government in the process and so on. And this offers support for the successful implementation of municipal pipe network franchise institution in China.

  1. 水下球形机器人推进器管道的设计和优化%Design and Optimization of the Thruster Pipes of a Submarine Spherical Robot

    Institute of Scientific and Technical Information of China (English)

    潘浩; 孙汉旭; 贾庆轩; 李鹏

    2013-01-01

    According to the design requirements of a submarine spherical robot, the viscous flow in curved rectangular ducts with different section dimensions and curvature radii is simulated numerically with CFD (computational fluid dynamics) under different flow patterns. Taking the centrifugal force effect into consideration, the variation of the secondary flow intensity and viscous resistance along with the changing parameters of curved ducts is studied intensively, drawing the conclusion that the hydraulic loss of a curved duct, whose aspect ratio is 0.75, is the lowest. Then, the flow structure of the curved duct is analyzed. Finally, the vortex intensity of outlet section is measured on a standard testing platform with the help of a kind of vorticity probe, verifying the correctness of numerical simulation. Thereby, the design and optimization of the pipes in the submarine spherical robot are completed by comparative analysis.%根据水下球形机器人的设计需要,运用CFD(computational fluid dynamics)技术,对不同流态下不同截面尺寸和曲率半径的矩形截面弯管内的黏性流动进行了数值模拟.研究了离心力作用下二次流强度和壁面黏滞阻力随弯管参数变化的情况,得出了截面宽高比为0.75的弯管的水力损失最小的结论,并对该截面形状的弯管的流动结构进行了分析.最后,在标准试验平台上运用涡量探头对出口截面的涡流强度进行了测量,从而证明了数值模拟的正确性,并通过对比分析,完成了水下球形机器人的管道设计和优化.

  2. 基于西门子S7-200的 RH精炼炉浸渍管维修台车的自动控制设计%The automatic control design of RH refining furnace dip pipe repair car based on Siemens S7-200

    Institute of Scientific and Technical Information of China (English)

    汪宏武

    2014-01-01

    According to some control requirements of RH refining furnace dip pipe repair car at some steel plant of 150 t, the electric control system of the dip pipe repair car has been designed taking Sie-mens S7-200 PLC as control core, control program has developed with STEP7 MicroWin V4 .0 being software development environment.Through the application of PLC, the dip pipe repair car has reduced the failure rate of the system, and improved the reliability of the system, greatly increased the production efficiency and production capacity.%针对某钢厂150 t RH精炼炉浸渍管维修台车的控制需求,设计了以西门子S7-200 PLC为控制核心的电气控制系统,以STEP7 MicroWin V4.0软件为用户程序开发环境,开发了浸渍管维修台车的控制程序。通过PLC的应用,降低了系统的故障率,提高了系统的可靠性,使生产效率和生产能力大大提高。

  3. POSSIBILITIES OF THE USE OF GRP PIPING IN THE CONSTRUCTION AND RECONSTRUCTION OF ENGINEERING NETWORKS

    Directory of Open Access Journals (Sweden)

    ikitina Irina Nikolaevna

    2015-12-01

    Full Text Available Today in modern construction new technologies and materials are used for the manufacture of pipelines for water supply and sanitation. They are supposed to operate for at least 50 years. Unlike plastic pipes, fiberglass ones may be made of larger sizes — up to 3700 mm in diameter. They are produced using the technology of optical fiber winding, which is carried out according to modern international standards of quality. The basic raw materials — fiberglass and resin — are produced in Russia, but their production is limited, so they are purchased abroad, which increases the cost of manufacture of this type of piping. However, due to the necessity of laying pipelines of large diameter, which cannot be made with plastic pipes, the manufacture of GRP pipes will increase. The experience of laying and constructing this type of pipelines, for example, in the areas of hot water supply allows concluding that they are able to withstand the temperatures of up to 150 °C, while their weight is four times less than the weight of steel pipes (they are easily installed with the help of small lifting equipment and by a team of six people. It should be noted that the use of fiberglass pipes helps to reduce the costs of system operation, because this type of piping is not subject to corrosion and encrustation of the inner surface, since it has a low level of roughness, which, for example, is 0.013 for a steel pipe, and 0.01 for fiberglass pipe. Thus, it is not necessary to put protective corrosion-resistant coatings and to provide an expensive protection against electrochemical corrosion. Piping made of fiberglass pipes can be designed as underground, above-ground with stacking or raised on poles. It is possible to combine these options.

  4. Smoking water pipe is injurious to lungs

    DEFF Research Database (Denmark)

    Sivapalan, Pradeesh; Ringbæk, Thomas; Lange, Peter

    2014-01-01

    This review describes the pulmonary consequences of water pipe smoking. Smoking water pipe affects the lung function negatively, is significantly associated with chronic obstructive pulmonary disease and increases the risk of lung infections. Case reports suggest that regular smokers of water pipe...

  5. 46 CFR 108.449 - Piping tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping tests. 108.449 Section 108.449 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.449 Piping tests. (a... piping installation. (b) When tested with CO2 or other inert gas under a pressure of 70 kilograms...

  6. 14 CFR 29.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 29.1123 Section 29.1123... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Exhaust System § 29.1123 Exhaust piping. (a) Exhaust piping must be heat and corrosion resistant, and must have provisions to prevent failure due to...

  7. 46 CFR 76.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.10-15 Section 76.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 76.10-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements...

  8. 46 CFR 193.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.10-15 Section 193.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 193.10-15 Piping. (a) All piping, valves, and fittings, shall meet...

  9. 46 CFR 95.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.10-15 Section 95.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 95.10-15 Piping. (a) All piping, valves, and fittings shall meet the...

  10. 14 CFR 25.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 25.1123 Section 25.1123... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Exhaust System § 25.1123 Exhaust piping. For powerplant and auxiliary power unit installations, the following apply: (a) Exhaust piping must be heat...

  11. 46 CFR 132.110 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 132.110 Section 132.110 Shipping COAST GUARD....110 Piping. (a) Except as provided for liftboats by § 134.180 of this subchapter, each fitting, flange, valve, and run of piping must meet the applicable requirements of part 128 of this subchapter....

  12. Thermodynamic aspects of heat pipe operation

    Science.gov (United States)

    Richter, Robert; Gottschlich, Joseph

    1990-01-01

    An expanded heat pipe operating model is described which includes thermodynamic and heat transfer considerations to reconcile disparities between actual and theoretical heat pipe performances. The analysis shows that thermodynamic considerations can explain the observed heat pipe performance limitations. A full understanding of thermodynamic processes could lead to advanced concepts for thermal transport devices.

  13. 46 CFR 154.660 - Pipe welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipe welding. 154.660 Section 154.660 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR... § 154.660 Pipe welding. (a) Pipe welding must meet Part 57 of this chapter. (b) Longitudinal butt...

  14. 49 CFR 192.59 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.59 Section 192.59 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.59 Plastic pipe. (a) New plastic pipe... specification; and (2) It is resistant to chemicals with which contact may be anticipated. (b) Used plastic...

  15. 49 CFR 236.712 - Brake pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Brake pipe. 236.712 Section 236.712 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.712 Brake pipe. A pipe...

  16. 46 CFR 76.25-30 - Piping.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Automatic Sprinkling System, Details § 76.25-30 Piping. (a) All piping, valves, and fittings of ferrous materials shall be... piping, valves, fittings, and sprinkler heads shall be securely supported, and, where...

  17. 46 CFR 56.10-5 - Pipe.

    Science.gov (United States)

    2010-10-01

    ...) Ferrous pipe. ASTM Specification A 53 (incorporated by reference, see § 56.01-2) furnace welded pipe shall... found from Table 56.60-1(a). (3) Copper-nickel alloys may be used for water and steam service within the... specifically permitted by this part. (6) Aluminum-alloy pipe or tube along with similar junction equipment may...

  18. High heat flux loop heat pipes

    Science.gov (United States)

    North, Mark T.; Sarraf, David B.; Rosenfeld, John H.; Maidanik, Yuri F.; Vershinin, Sergey

    1997-01-01

    Loop Heat Pipes (LHPs) can transport very large thermal power loads, over long distances, through flexible, small diameter tubes and against high gravitational heads. While recent LHPs have transported as much as 1500 W, the peak heat flux through a LHP's evaporator has been limited to about 0.07 MW/m2. This limitation is due to the arrangement of vapor passages next to the heat load which is one of the conditions necessary to ensure self priming of the device. This paper describes work aimed at raising this limit by threefold to tenfold. Two approaches were pursued. One optimized the vapor passage geometry for the high heat flux conditions. The geometry improved the heat flow into the wick and working fluid. This approach also employed a finer pored wick to support higher vapor flow losses. The second approach used a bidisperse wick material within the circumferential vapor passages. The bidisperse material increased the thermal conductivity and the evaporative surface area in the region of highest heat flux, while providing a flow path for the vapor. Proof-of-concept devices were fabricated and tested for each approach. Both devices operated as designed and both demonstrated operation at a heat flux of 0.70 MW/m2. This performance exceeded the known state of the art by a factor of more than six for both conventional heat pipes and for loop heat pipes using ammonia. In addition, the bidisperse-wick device demonstrated boiling heat transfer coefficients up to 100,000 W/m2.K, and the fine pored device demonstrated an orientation independence with its performance essentially unaffected by whether its evaporator was positioned above, below or level with the condenser.

  19. Loop heat pipe for thermal conditions supplying systems for elements of radio electronic equipment

    Directory of Open Access Journals (Sweden)

    Khayrnasov S. М.

    2010-06-01

    Full Text Available The loop heat pipe design presented in the article provides the transmission of thermal flow up to 105 W when working in temperature range of 20—90°C and on any space orientation.

  20. A review of pipe and bamboo artificial refugia as sampling tools in anuran studies

    Science.gov (United States)

    Glorioso, Brad M.; Waddle, J. Hardin

    2014-01-01

    Artificial pipe-like refugia have been used for more than 40 years in anuran studies, and have captured 28 species, primarily (82%) hylid treefrogs. Early pipe-like refugia were made using cut pieces of bamboo in the tropical forests of Puerto Rico, but most recent studies have used synthetic pipes and have occurred primarily in the southeastern United States. Characteristics of artificial refugia (e.g., color, length, and diameter), and their placement in the environment have varied greatly among studies, making comparisons difficult. Here, we summarize and evaluate different pipe designs and placement, address potential concerns when using artificial pipe-like refugia, and suggest studies necessary to better interpret the data gained from this technique in anuran studies.

  1. Analysis of light guiding property in light piped based solar concentrator

    Science.gov (United States)

    Whang, Allen J.; Chuang, Chun-Hsien, Jr.; Chen, Yi-Yung

    2008-02-01

    Recently, many researchers have tried to design a system for indoor illumination because the benefits of solar systems. A simple parabolic reflector is often used to collect sunlight but the efficiency is poor when sunlight isn't incident normally. Therefore, an accurate machine to track sun has to be used. In order to get better tolerance, a light pipe based solar concentrator (LPBSC) which comprises a parabolic reflector and a hollow reflective light pipe is proposed. We develop a math model which combines the reflection times of sunlight in light pipe and the candela data of parabolic reflector to analyze the efficiency. And then, straight light pipe is replaced by tapered light pipe to improve the tolerance. Optical simulation software, TracePro, and mathematical software, MATLAB, are used to prove the model is correct and feasible. In the results, LPBSC can improve the tolerance to get good efficiency.

  2. Transient modeling of the thermohydraulic behavior of high temperature heat pipes for space reactor applications

    Science.gov (United States)

    Hall, Michael L.; Doster, Joseph M.

    1986-01-01

    Many proposed space reactor designs employ heat pipes as a means of conveying heat. Previous researchers have been concerned with steady state operation, but the transient operation is of interest in space reactor applications due to the necessity of remote startup and shutdown. A model is being developed to study the dynamic behavior of high temperature heat pipes during startup, shutdown and normal operation under space environments. Model development and preliminary results for a hypothetical design of the system are presented.

  3. Thermal Vacuum Test of GLAS Propylene Loop Heat Pipe Development Model

    Science.gov (United States)

    Baker, Charles; Butler, Dan; Ku, Jentung; Kaya, Tarik; Nikitkin, Michael

    2000-01-01

    This paper presents viewgraphs on Thermal Vacuum Tests of the GLAS (Geoscience Laser Altimeter System) Propylene Loop Heat Pipe Development Model. The topics include: 1) Flight LHP System (Laser); 2) Test Design and Objectives; 3) DM (Development Model) LHP (Loop Heat Pipe) Test Design; 4) Starter Heater and Coupling Blocks; 5) CC Control Heaters and PRT; 6) Heater Plates (Shown in Reflux Mode); 7) Startup Tests; 8) CC Control Heater Power Tests for CC Temperature Control; and 9) Control Temperature Stability.

  4. This is not a Pipe

    DEFF Research Database (Denmark)

    Just, Sine Nørholm

    2016-01-01

    or unwilling to listen to, let alone engage with, emotionally guided bottom-up participation. Using an illustrative case of a Danish public debate over an alleged ban on liquorice pipes, this article argues that the disconnect between invitation and participation may be explained by the fact...

  5. Investigation of sand in piping

    Directory of Open Access Journals (Sweden)

    Nađ Laslo

    2012-01-01

    Full Text Available For the investigation of the grain size distribution of the material washed out from the piping, we used 20 samples originating from different places on the Danube and the Tisza rivers. The grading characteristics of these samples were investigated based on selected grain sizes and the uniformity of gradients. Based on the investigations it has become possible to identify which grain size fractions are likely to be washed out, and how to characterize those fractions. Based on the grain size distribution curves it has been made possible to define the boundaries of the zone susceptible to piping. The zone limits of granular soils liquefied by earthquakes and the zone limits of the soil out washed from piping are very similar. This apparent correspondence already formerly raised the hypothetic question of whether piping occurring during high flood can be simulated by shape to similar surface liquefaction phenomena experienced during earthquakes, as in both cases a volcanic cone is formed through the crater of which water is constantly issuing, dragging away solid particles.

  6. Localized turbulence in pipe flow

    NARCIS (Netherlands)

    Kuik, D.J.

    2011-01-01

    In this thesis the transition to turbulence in pipe flow is investigated. At low Reynolds numbers, the flow returns to the laminar state spontaneously. At high Reynolds number a small perturbation causes the flow to suddenly become turbulent. In the intermediate regime localized turbulence is observ

  7. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...

  8. Spinning pipe gas lens revisited

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-01-01

    Full Text Available The graded index (GRIN-like) medium generated by gas inside a heated steel pipe when rotated about its longitudinal axis has the ability to focus a laser beam. While the effective focal length of such a system has previously been studied...

  9. A Novel MagPipe Pipeline transportation system using linear motor drives

    Energy Technology Data Exchange (ETDEWEB)

    Fang, J.R.; Montgomery, D.B.; Roderick, L. [Magplane Technology Inc., Littleton, MA (United States)

    2009-11-15

    A novel capsule pipeline transportation system using linear motor drives, called Magplane MagPipe, is under development with the intention to replace trucks and railways for hauling materials from the mine to the rail head, power plant, or processing plant with reduced operating cost and energy consumption. The initial demonstration of a MagPipe line in Inner Mongolia will be a 500-m-long double-pipe coal transport system with the design transportation capacity of 3 Mega-Mg per year. The pipeline consists of 6-m-long plastic pipe modules with an I-beam suspension system inside the pipe to carry sets of five coupled capsules. The pipe will also contain noncontinuous motor winding modules spaced at 50-m intervals. A set of Halbach-arrayed permanent magnets on the bottom of the capsules interact with the linear motor windings to provide propulsion. The motor is driven by variable frequency drives outside the pipe to control the speed. This paper briefly describes the overall MagPipe pipeline transportation system, including the preliminary conclusions of the linear synchronous motor analysis.

  10. Length Effect on the Thermal Performance of a Heat Pipe for NPP Decay Heat Removal

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Joseph; Lee, Jae Young [Handong Global University, Pohang (Korea, Republic of)

    2015-10-15

    After Fukushima accident, importance and necessity of passive safety for nuclear power plant have been emphasized. Due to its passive characteristic, heat pipe is seriously considered as an alternative device of the active safety system for removing decay heat from the reactor core. Among many possible applications of heat pipe in NPP, we considered the application to the control rod. In the situation of SBO(Station Black Out) due to BDBA(Beyond Design Basis Accident) in a PWR, control rods are dropped in to nuclear reactor core automatically. Thus, it is expected that applying heat pipe function to control rod can enhance reactor safety by removing decay heat of fuel assembly. Considering the height of the control rod, L/D of the heat pipe would be larger than 400 if the given diameter is assumed to be similar to the diameter of the control rod. Thus, it may not be the matter for small heat pipes, it is necessary to consider the effects of L/D for the large L/D heat pipes. There for, length effect on the thermal performance of heat pipe for decay heat removal was experimentally investigated in this study. Through this study, the L/D effect on the thermal performance of the large L/D heat pipe for nuclear reactor has been studied.

  11. Piping benchmark problems for the ABB/CE System 80+ Standardized Plant

    Energy Technology Data Exchange (ETDEWEB)

    Bezler, P.; DeGrassi, G.; Braverman, J.; Wang, Y.K. [Brookhaven National Lab., Upton, NY (United States)

    1994-07-01

    To satisfy the need for verification of the computer programs and modeling techniques that will be used to perform the final piping analyses for the ABB/Combustion Engineering System 80+ Standardized Plant, three benchmark problems were developed. The problems are representative piping systems subjected to representative dynamic loads with solutions developed using the methods being proposed for analysis for the System 80+ standard design. It will be required that the combined license licensees demonstrate that their solution to these problems are in agreement with the benchmark problem set. The first System 80+ piping benchmark is a uniform support motion response spectrum solution for one section of the feedwater piping subjected to safe shutdown seismic loads. The second System 80+ piping benchmark is a time history solution for the feedwater piping subjected to the transient loading induced by a water hammer. The third System 80+ piping benchmark is a time history solution of the pressurizer surge line subjected to the accelerations induced by a main steam line pipe break. The System 80+ reactor is an advanced PWR type.

  12. Mathematical models for two-phase stratified pipe flow

    Energy Technology Data Exchange (ETDEWEB)

    Biberg, Dag

    2005-06-01

    The simultaneous transport of oil, gas and water in a single multiphase flow pipe line has for economical and practical reasons become common practice in the gas and oil fields operated by the oil industry. The optimal design and safe operation of these pipe lines require reliable estimates of liquid inventory, pressure drop and flow regime. Computer simulations of multiphase pipe flow have thus become an important design tool for field developments. Computer simulations yielding on-line monitoring and look ahead predictions are invaluable in day-to-day field management. Inaccurate predictions may have large consequences. The accuracy and reliability of multiphase pipe flow models are thus important issues. Simulating events in large pipelines or pipeline systems is relatively computer intensive. Pipe-lines carrying e.g. gas and liquefied gas (condensate) may cover distances of several hundred km in which transient phenomena may go on for months. The evaluation times associated with contemporary 3-D CFD models are thus not compatible with field applications. Multiphase flow lines are therefore normally simulated using specially dedicated 1-D models. The closure relations of multiphase pipe flow models are mainly based on lab data. The maximum pipe inner diameter, pressure and temperature in a multiphase pipe flow lab is limited to approximately 0.3 m, 90 bar and 60{sup o}C respectively. The corresponding field values are, however, much higher i.e.: 1 m, 1000 bar and 200{sup o}C respectively. Lab data does thus not cover the actual field conditions. Field predictions are consequently frequently based on model extrapolation. Applying field data or establishing more advanced labs will not solve this problem. It is in fact not practically possible to acquire sufficient data to cover all aspects of multiphase pipe flow. The parameter range involved is simply too large. Liquid levels and pressure drop in three-phase flow are e.g. determined by 13 dimensionless parameters

  13. Stability and post-buckling response of sandwich pipes under hydrostatic external pressure

    Energy Technology Data Exchange (ETDEWEB)

    Arjomandi, Kaveh [Department of Civil and Resource Engineering, Dalhousie University, 1360 Barrington Street, Halifax, NS B3J 1Z1 (Canada); Taheri, Farid, E-mail: farid.taheri@dal.ca [Department of Civil and Resource Engineering, Dalhousie University, 1360 Barrington Street, Halifax, NS B3J 1Z1 (Canada)

    2011-04-15

    Sandwich pipe systems can be considered as potentially optimum design configurations for overcoming the shortfalls of single-walled pipes for deep-water applications. This potential design alternative has gained considerable attention in recent years. In this paper the stability of these systems is investigated. The possible equilibrium paths are evaluated and the effect of the various significant parameters on the characteristic behavior of the system is discussed. The Finite Element (FE) software package ABAQUS is used to construct more than 3000 FE models of the sandwich pipes with practical configurations. Four design configurations are considered for the sandwich pipes with respect to the adhesion among the interfaces. The post-buckling behavior of each of these configurations is determined, with emphasis on a wide practical range of parameters. The behavior of these configurations is examined and the efficiency of each system is discussed. Finally, a simplified and fairly accurate equation is developed and recommended for calculating the pressure capacity of sandwich pipes. The parameters of the proposed equation are also fully defined. - Highlights: > The stability of sandwich pipes (SP) in deep water is investigated. > 3000 FE models of SP with practical configurations were constructed and analyzed. > The possible equilibrium paths are evaluated and the effect of the various significant parameters is discussed. > The interface core/pipe adhesion is also investigated and shown to have significant impact on the stability. > Finally, a simplified and fairly accurate equation is developed for calculating the pressure capacity of SP.

  14. Efficient methods of piping cleaning

    Directory of Open Access Journals (Sweden)

    Orlov Vladimir Aleksandrovich

    2014-01-01

    Full Text Available The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of drainage pipes. The co-authors emphasize that the use of ice compared to other methods of pipe cleaning has a number of advantages due to the relative simplicity and cheapness of the process, economical efficiency and lack of environmental risk. The equipment for performing ice cleaning is presented, its technological options, terms of cleansing operations, as well as the volumes of disposed pollution per unit length of the water supply and drainage pipelines. It is noted that ice cleaning requires careful planning in the process of cooking ice and in the process of its supply in the pipe. There are specific requirements to its quality. In particular, when you clean drinking water system the ice applied should be hygienically clean and meet sanitary requirements.In pilot projects, in particular, quantitative and qualitative analysis of sediments adsorbed by ice is conducted, as well as temperature and the duration of the process. The degree of pollution of the pipeline was estimated by the volume of the remote sediment on 1 km of pipeline. Cleaning pipelines using ice can be considered one of the methods of trenchless technologies, being a significant alternative to traditional methods of cleaning the pipes. The method can be applied in urban pipeline systems of drinking water supply for the diameters of 100—600 mm, and also to diversion collectors. In the world today 450 km of pipelines are subject to ice cleaning method.Ice cleaning method is simple

  15. SUPPRESSION OF THE SECONDARY FLOWS IN A BEND PIPE USING NAVIER-STOKES SOLVER AND EVOLUTIONARY ALGORITHMS

    Institute of Scientific and Technical Information of China (English)

    LI Jun; LIU Li-jun; FENG Zhen-ping

    2004-01-01

    Hydrodynamic optimization design of the bend pipe from pump using the Navier-Stokes solver and evolutionary algorithms was conducted. The minimization of the total pressure loss of the bend pipe was chosen as the design object in order to obtain the uniform exit flows through suppressing the secondary flows. The 3-D Navier-Stokes solver was applied to evaluate the hydrodynamic performance of the bend-pipe flows. A 7th-order Bezier curve was used to parameterize the meridional section and elliptic representation was adopted to represent the cross-section profiles of the bend pipe. Evolutionary algorithms were applied in optimization. The obtained results show that the designed bend pipe shape has much more uniform exit flows compared with the initial one and much weaker secondary flows, and that the evolutionary algorithms and CFD technique are the powerful optimization tools for the fluid machinery design.

  16. Research on Seal Design of Plug Valves with Square Pipe for BOP System within Drilling String%钻柱内防喷系统方钻杆旋塞阀的密封设计研究

    Institute of Scientific and Technical Information of China (English)

    王长江; 陈浩; 刘然

    2013-01-01

    Plug valves are used in the BOP system of drilling pipe within drilling by many oilfield because its superior performance,including sealing performance is one of the main index of plug valves.The results of field survey and analysis concludes that seal failure especially the main seal failure between valve seat and valve ball is the main factor of bothering plug valve's service life,sealing material properties and seals pressure directly affect the plug valve's sealing effectiveness.Seal research achievements of existing plug valve are focusing on how to design and improve sealing structure,lack of in-depth analysis to seal condition of plug valve and proper selection and calculation to sealing required pressure,so it is difficult to more clearly understood seal failure of plug valve.Expounds seal structure and seal mechanism of the plug valve,briefly explain the reasonable selection and strengthen treatment measures about seal materials,focused research on the main seal design through the valve ball and seat beating model analysis and according to seal condition and sealing necessary pressure of plug valve.Results show that the main seal design and selected materials of plug valves meet the requirements of the maximum working pressure,and necessary pressure by working pressure produced enough to guarantee the sealing performance of the main seal,providing feasible theory basis for further perfecting to seal design of plug valve.%方钻杆旋塞阀因其优越性能被各大油田用于钻井钻柱内防喷系统,其中密封性能是方钻杆旋塞阀的主要指标之一.经现场调研分析研究得知.密封失效尤其是阀球与阀座间的主密封失效是困扰方钻杆旋塞阀使用寿命的主要因素,密封件材料性能及密封比压直接影响着方钻杆旋塞阀的密封效果.现有方钻杆旋塞阀密封方面的研究成果均是围绕如何设计与改进密封结构而进行的,缺乏对方钻杆旋塞阀密封条件的深入分析及

  17. Profile Design and 3D Flow Field Simulation of Steel Bifurcation Pipe in the CCS Hydropower Station in Ecuador%厄瓜多尔 CCS 水电站钢岔管体形设计与三维流场分析

    Institute of Scientific and Technical Information of China (English)

    王春; 陈丽晔; 伍鹤皋; 程永光

    2015-01-01

    厄瓜多尔CCS水电站钢岔管设计内水压力6.83 MPa,HD值高达4084 m2。采用美国ASME标准并选用日本钢材对此进行了设计。在岔管体型初步设计的基础上,建立了岔管三维有限元数值模型,对岔管进行了结构分析,并对典型工况下的岔管水力学情况进行数值模拟,根据计算结果提出对岔管体形和机组运行的优化建议。%The steel bifurcation pipe with a design internal water pressure of 6.83 MPa and HD value of 4084 m2 in the CCS Hydropower Station Project in Ecuador is designed according to the American standard ASME 79, and the Japanese steel material is adopted.Based on the preliminary design of bifurcation profile, a three-dimensional finite element mod-el of the bifurcation pipe is built and a structure analysis is carried out.In addition, numerical simulations of the typical hydraulic conditions are performed.Accordingly, optimization suggestions on the profile design and operation of units are proposed.

  18. CODIFICATION OF FIBER REINFORCED COMPOSITE PIPING

    Energy Technology Data Exchange (ETDEWEB)

    Rawls, G.

    2012-10-10

    The goal of the overall project is to successfully adapt spoolable FRP currently used in the oil industry for use in hydrogen pipelines. The use of FRP materials for hydrogen service will rely on the demonstrated compatibility of these materials for pipeline service environments and operating conditions. The ability of the polymer piping to withstand degradation while in service, and development of the tools and data required for life management are imperative for successful implementation of these materials for hydrogen pipeline. The information and data provided in this report provides the technical basis for the codification for fiber reinforced piping (FRP) for hydrogen service. The DOE has invested in the evaluation of FRP for the delivery for gaseous hydrogen to support the development of a hydrogen infrastructure. The codification plan calls for detailed investigation of the following areas: System design and applicable codes and standards; Service degradation of FRP; Flaw tolerance and flaw detection; Integrity management plan; Leak detection and operational controls evaluation; Repair evaluation. The FRP codification process started with commercially available products that had extensive use in the oil and gas industry. These products have been evaluated to assure that sufficient structural integrity is available for a gaseous hydrogen environment.

  19. BOA: Pipe-asbestos insulation removal robot system

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.; Bares, J.; Mutschler, E. [and others

    1995-12-31

    This paper describes the BOA system, a mobile pipe-external crawler used to remotely strip and bag (possibly contaminated) asbestos-containing lagging and insulation materials (ACLIM) from various diameter pipes in (primarily) industrial installations across the DOE weapons complex. The mechanical removal of ACLIM is very cost-effective due to the relatively low productivity and high cost involved in human removal scenarios. BOA, a mechanical system capable of removing most forms of lagging (paper, plaster, aluminum sheet, clamps, screws and chicken-wire), and insulation (paper, tar, asbestos fiber, mag-block) uses a circular cutter and compression paddles to cut and strip the insulation off the pipe through compression, while a HEPA-filter and encapsulant system maintain a certifiable vacuum and moisture content inside the system and on the pipe, respectively. The crawler system has been built and is currently undergoing testing. Key design parameters and performance parameters are developed and used in performance testing. Since the current system is a testbed, we also discuss future enhancements and outline two deployment scenarios (robotic and manual) for the final system to be designed and completed by the end of FY `95. An on-site demonstration is currently planned for Fernald in Ohio and Oak Ridge in Tennessee.

  20. Underground pipe inspection device and method

    Science.gov (United States)

    Germata, Daniel Thomas [Wadsworth, IL

    2009-02-24

    A method and apparatus for inspecting the walls of an underground pipe from inside the pipe in which an inspection apparatus having a circular planar platform having a plurality of lever arms having one end pivotably attached to one side of the platform, having a pipe inspection device connected to an opposite end, and having a system for pivoting the lever arms is inserted into the underground pipe, with the inspection apparatus oriented with the planar platform disposed perpendicular to the pipe axis. The plurality of lever arms are pivoted toward the inside wall of the pipe, contacting the inside wall with each inspection device as the apparatus is conveyed along a length of the underground pipe.

  1. Assessment of existing and prospective piping technology for district-heating applications

    Energy Technology Data Exchange (ETDEWEB)

    Oliker, I.

    1979-09-01

    Data on design features and operational experience of 40 hot water and steam district-heating networks with an overall heat capacity of 18,000 MWt have been collected, systematized, and analyzed. Piping networks located in Canada, Denmark, Finland, France, Italy, Japan, Netherlands, Sweden, USA, USSR, and West Germany have been analyzed and the data assembled. The data bank and analysis of the operational experience design features of hot water and steam district-heating networks are provided in Sections 2 and 3. In Section 4 the piping installation design is optimized in order to reduce costs wherever possible, without jeopardizing overall system efficiency, reliability or service life, and employing a mixture of typical US and European district-heating practices. The status of prospective non-metallic piping materials is presented in Section 5. The following materials have been investigated: fiberglass reinforced plastic, cross-linked polyethylene, polybutylene, prestressed concrete, polymer concrete, and asbestos-cement piping. (MCW)

  2. Crack stability in a representative piping system under combined inertial and seismic/dynamic displacement-controlled stresses. Subtask 1.3 final report

    Energy Technology Data Exchange (ETDEWEB)

    Scott, P.; Olson, R.; Wilkowski, O.G.; Marschall, C.; Schmidt, R.

    1997-06-01

    This report presents the results from Subtask 1.3 of the International Piping Integrity Research Group (IPIRG) program. The objective of Subtask 1.3 is to develop data to assess analysis methodologies for characterizing the fracture behavior of circumferentially cracked pipe in a representative piping system under combined inertial and displacement-controlled stresses. A unique experimental facility was designed and constructed. The piping system evaluated is an expansion loop with over 30 meters of 16-inch diameter Schedule 100 pipe. The experimental facility is equipped with special hardware to ensure system boundary conditions could be appropriately modeled. The test matrix involved one uncracked and five cracked dynamic pipe-system experiments. The uncracked experiment was conducted to evaluate piping system damping and natural frequency characteristics. The cracked-pipe experiments evaluated the fracture behavior, pipe system response, and stability characteristics of five different materials. All cracked-pipe experiments were conducted at PWR conditions. Material characterization efforts provided tensile and fracture toughness properties of the different pipe materials at various strain rates and temperatures. Results from all pipe-system experiments and material characterization efforts are presented. Results of fracture mechanics analyses, dynamic finite element stress analyses, and stability analyses are presented and compared with experimental results.

  3. Transient Response to Rapid Cooling of a Stainless Steel Sodium Heat Pipe

    Science.gov (United States)

    Mireles, Omar R.; Houts, Michael G.

    2011-01-01

    Compact fission power systems are under consideration for use in long duration space exploration missions. Power demands on the order of 500 W, to 5 kW, will be required for up to 15 years of continuous service. One such small reactor design consists of a fast spectrum reactor cooled with an array of in-core alkali metal heat pipes coupled to thermoelectric or Stirling power conversion systems. Heat pipes advantageous attributes include a simplistic design, lack of moving parts, and well understood behavior. Concerns over reactor transients induced by heat pipe instability as a function of extreme thermal transients require experimental investigations. One particular concern is rapid cooling of the heat pipe condenser that would propagate to cool the evaporator. Rapid cooling of the reactor core beyond acceptable design limits could possibly induce unintended reactor control issues. This paper discusses a series of experimental demonstrations where a heat pipe operating at near prototypic conditions experienced rapid cooling of the condenser. The condenser section of a stainless steel sodium heat pipe was enclosed within a heat exchanger. The heat pipe - heat exchanger assembly was housed within a vacuum chamber held at a pressure of 50 Torr of helium. The heat pipe was brought to steady state operating conditions using graphite resistance heaters then cooled by a high flow of gaseous nitrogen through the heat exchanger. Subsequent thermal transient behavior was characterized by performing an energy balance using temperature, pressure and flow rate data obtained throughout the tests. Results indicate the degree of temperature change that results from a rapid cooling scenario will not significantly influence thermal stability of an operating heat pipe, even under extreme condenser cooling conditions.

  4. IMPROVING THERMAL PERFORMANCE OF RADIOACTIVE MATERIAL DRUM TYPEPACKAGES BY USING HEAT PIPES

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, N

    2007-03-06

    This paper presents a feasibility study to improve thermal loading of existing radioactive material packages by using heat pipes. The concept could be used to channel heat in certain directions and dissipate to the environment. The concept is applied to a drum type package because the drum type packages are stored and transported in an upright position. This orientation is suitable for heat pipe operation that could facilitate the heat pipe implementation in the existing well proven package designs or in new designs where thermal loading is high. In this position, heat pipes utilize gravity very effectively to enhance heat flow in the upward direction Heat pipes have extremely high effective thermal conductivity that is several magnitudes higher than the most heat conducting metals. In addition, heat pipes are highly unidirectional so that the effective conductivity for heat transfer in the reverse direction is greatly reduced. The concept is applied to the 9977 package that is currently going through the DOE certification review. The paper presents computer simulations using typical off-the-shelf heat pipe available configurations and performance data for the 9977 package. A path forward is outlined for implementing the concepts for further study and prototype testing.

  5. Double Shell Tank (DST) Transfer Piping Subsystem Specification

    Energy Technology Data Exchange (ETDEWEB)

    GRAVES, C.E.

    2000-03-22

    This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied during design of the Double-Shell Tank (DST) Transfer Piping Subsystem that supports the first phase of Waste Feed Delivery. This specification establishes the performance requirements and provides references to the requisite codes and standards to be applied during design of the Double-Shell Tank (DST) Transfer Piping Subsystem that supports the first phase of waste feed delivery. This subsystem transfers waste between transfer-associated structures (pits) and to the River Protection Project (RPP) Privatization Contractor Facility where it will be processed into an immobilized waste form. This specification is intended to be the basis for new projects/installations (W-521, etc.). This specification is not intended to retroactively affect previously established project design criteria without specific direction by the program.

  6. Kinetics of Exhaled Carbon Monoxide After Water-pipe Smoking Indoors and Outdoors.

    Science.gov (United States)

    Juhasz, Agnes; Pap, Dalma; Barta, Imre; Drozdovszky, Orsolya; Egresi, Andrea; Antus, Balazs

    2017-05-01

    Despite accumulating evidence about its adverse health effects, water-pipe tobacco smoking has become very popular among youth. The aim of this study was to compare smoke exposure and the kinetics of exhaled carbon monoxide (eCO) between water-pipe and cigarette smokers under different conditions. Using a cross-over study design, changes in eCO and urinary cotinine levels were measured in a cohort of 32 healthy university students after sessions of water-pipe smoking indoors and outdoors. An indoor cigarette smoking session with equal amounts of tobacco was conducted for reference purposes. Both active and passive smokers participated in all sessions. In indoor sessions, we found that among active participants, eCO levels were approximately 7.5-fold higher in water-pipe users than cigarette smokers. eCO levels remained significantly elevated even 10 h after discontinuing water-pipe smoking. Notably, eCO levels in passive water-pipe smokers were in the same range as in active cigarette smokers. Compared with indoor sessions, eCO levels in active water-pipe users were reduced in outdoor environments. Nonetheless, levels were still higher in these subjects than those in active cigarette smokers measured in indoor sessions. Urinary cotinine levels were comparable in active water-pipe and cigarette smokers. Our results suggest that water-pipe smoking is associated with significantly higher toxicant exposure than cigarette smoking even in outdoor environments. Furthermore, even passive, indoor water-pipe smoke exposure may have significant health hazards compared with those of active cigarette smoking. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  7. Investigation of organic matter migrating from polymeric pipes into drinking water under different flow manners.

    Science.gov (United States)

    Zhang, Ling; Liu, Shuming; Liu, Wenjun

    2014-02-01

    Polymeric pipes, such as unplasticized polyvinyl chloride (uPVC) pipes, polypropylene random (PPR) pipes and polyethylene (PE) pipes are increasingly used for drinking water distribution lines. Plastic pipes may include some additives like metallic stabilizers and other antioxidants for the protection of the material during its production and use. Thus, some compounds can be released from those plastic pipes and cast a shadow on drinking water quality. This work develops a new procedure to investigate three types of polymer pipes (uPVC, PE and PPR) with respect to the migration of total organic carbon (TOC) into drinking water. The migration test was carried out in stagnant conditions with two types of migration processes, a continuous migration process and a successive migration process. These two types of migration processes are specially designed to mimic the conditions of different flow manners in drinking water pipelines, i.e., the situation of continuous stagnation with long hydraulic retention times and normal flow status with regular water renewing in drinking water networks. The experimental results showed that TOC release differed significantly with different plastic materials and under different flow manners. The order of materials with respect to the total amount of TOC migrating into drinking water was observed as PE > PPR > uPVC under both successive and continuous migration conditions. A higher amount of organic migration from PE and PPR pipes was likely to occur due to more organic antioxidants being used in pipe production. The results from the successive migration tests indicated the trend of the migration intensity of different pipe materials over time, while the results obtained from the continuous migration tests implied that under long stagnant conditions, the drinking water quality could deteriorate quickly with the consistent migration of organic compounds and the dramatic consumption of chlorine to a very low level. Higher amounts of TOC

  8. NC flame pipe cutting machine tool based on open architecture CNC system

    Institute of Scientific and Technical Information of China (English)

    Xiaogen NIE; Yanbing LIU

    2009-01-01

    Based on the analysis of the principle and flame movement of a pipe cutting machine tool, a retrofit NC flame pipe cutting machine tool (NFPCM) that can meet the demands of cutting various pipes is proposed. The paper deals with the design and implementation of an open architecture CNC system for the NFPCM, many of whose aspects are similar to milling machines; however, different from their machining processes and control strategies. The paper emphasizes on the NC system structure and the method for directly creating the NC file according to the cutting type and parameters. Further, the paper develops the program and sets up the open and module NC system.

  9. 241-U-701 new compressor building and instrument air piping analyses

    Energy Technology Data Exchange (ETDEWEB)

    Huang, F.H.

    1994-08-25

    Building anchorage analysis is performed to qualify the design of the new compressor building foundation given in the ECN ``241-U-701 New Compressor Building.`` Recommendations for some changes in the ECN are made accordingly. Calculations show that the 6-in.-slab is capable of supporting the pipe supports, and that the building foundation, air compressor and dryer anchorage, and electric rack are adequate structurally. Analysis also shows that the instrument air piping and pipe supports for the compressed air system meet the applicable code requirements and are acceptable. The building is for the U-Farm instrument air systems.

  10. Phenomena associated with bench and thermal-vacuum testing of super conductors - Heat pipes.

    Science.gov (United States)

    Marshburn, J. P.

    1973-01-01

    Test failures of heat pipes occur when the functional performance is unable to match the expected design limits or when the power applied to the heat pipe (in the form of heat) is distributed unevenly through the system, yielding a large thermal gradient. When a thermal gradient larger than expected is measured, it normally occurs in the evaporator or condenser sections of the pipe. Common causes include evaporator overheating, condenser dropout, noncondensable gas formation, surge and partial recovery of evaporator temperatures, masking of thermal profiles, and simple malfunctions due to leaks and mechanical failures or flaws. Examples of each of these phenomena are described along with corresponding failure analyses and corrective measures.

  11. Prediction of Pressure Drop in Chilled Water Piping System Using Theoretical and CFD Analysis

    Directory of Open Access Journals (Sweden)

    Shirish P. Patil

    2013-08-01

    Full Text Available In the present study, three dimensional models of chilled water piping system is created using design modeler of Ansys-13. Ansys-13 fluent is used to analyses flow through chilled water pipe for pressure drop prediction. Karman-Prandtl equation is used for defining velocity profile of turbulent flow with the help of user defined function. Result obtained from CFD analysis is compared with results of 3K, 2K, ISHARE and Carrier equivalent length methods. Statistical analysis of performance based relative error has been carried out and based on that optimum analytical method for pressure drop prediction in chilled water piping is suggested.

  12. The measurement of the dielectric constant of concrete pipes and clay pipes

    Science.gov (United States)

    McGraw, David

    To optimize the effectiveness of the rehabilitation of underground utilities, taking in consideration limitation of available resources, there is a need for a cost effective and efficient sensing systems capable of providing effective, in real time and in situ, measurement of infrastructural characteristics. To carry out accurate non-destructive condition assessment of buried and above ground infrastructure such as sewers, bridges, pavements and dams, an advanced ultra-wideband (UWB) based radar was developed at Trenchless Technology Centre (TTC) and Centre for Applied Physics Studies (CAPS) at Louisiana Tech University (LTU). One of the major issues in designing the FCC compliant UWB radar was the contribution of the pipe wall, presence of complex soil types and moderate-to-high moisture levels on penetration depth of the electromagnetic (EM) energy. The electrical properties of the materials involved in designing the UWB radar exhibit a significant variation as a result of the moisture content, mineral content, bulk density, temperature and frequency of the electromagnetic signal propagating through it. Since no measurements of frequency dependence of the dielectric permittivity and conductivities of the pipe wall material in the FCC approved frequency range exist, in this thesis, the dielectric constant of concrete and clay pipes are measured over a microwave frequency range from 1 Ghz to 10 Ghz including the effects of moisture and chloride content. A high performance software package called MU-EPSLN(TM) was used for the calculations. Data reduction routines to calculate the complex permeability and permittivity of materials as well as other parameters are also provided. The results obtained in this work will be used to improve the accuracy of the numerical simulations and the performances of the UWB radar system.

  13. Development of high strength line pipe for Arctic applications

    Energy Technology Data Exchange (ETDEWEB)

    Collins, L.E.; Klein, R.; Bai, D. [Evraz Inc., Regina, SK (Canada). Frontier Pipe Research Unit

    2009-07-15

    The pipelines that will carry large volumes of natural gas from the Mackenzie Delta and the Alaska North Slope to Alberta will have to meet stringent new requirements on material performance. High strength steels with thick pipe walls will be needed to accommodate the high operating pressure that will be needed to transmit gas over long distances. In addition, low operating temperatures and strain-based designs will be needed to meet Arctic operating conditions in areas of continuous or discontinuous permafrost. The Mackenzie Gas Project (MGP) has specified 762 mm OD x 16.2 mm WT Grade 550 (APIx80). Although the pipe has a high degree of ductility, material performance is of concern in terms of girth welds and associated heat affected zones. Studies have shown that the weld strength must overmatch the longitudinal strength of the pipe by at least 5 per cent in order to deflect any failure from a crack on the weld fusion line. The weld itself and the HAZ must also demonstrate a high degree of toughness. While proponents of the Alaska gas pipeline wish to use Grade 690 (APIx100) line pipe, full stress capacity tests have yet to be completed for Grade 690 material in the preferred gauge of 19 to 25 mm. Therefore, this paper examined 3 key issues pertaining to the performance of high strength line pipe in strain-based designs. These included girth weld HAZ toughness; work hardening characteristics; and achievement of very high strength levels. It was concluded that much more effort is needed to fully optimize these steels and to translate preliminary laboratory solutions to workable processing technologies. 15 refs., 2 tabs., 8 figs.

  14. Vertical pipe inspection using swarm of independent robots

    Energy Technology Data Exchange (ETDEWEB)

    Pellizzari, D.; Ramirez-Serrano, A. [Calgary Univ., AB (Canada). Dept. of Mechanical and Manufacturing Engineering; Pettinaro, G.C. [Scuola Univ. Professionale della Svizzera Italiana, Canton Ticino (Switzerland). Inst. Dalle Molle di Studi sull' Intelligenza Artificiale

    2004-07-01

    This study investigated the use of multiple small robots for pipeline inspection operations. A team of autonomous s-bots were used. The s-bots were comprised of a traction system; a turret; a gripper for tight grasps; and an extensible gripper for keeping loose physical contacts with other peers. The robots were designed to collaborate with each other by connecting firmly or loosely together in different structures called swarm-bots. Communication between the s-bots was conducted by means of stigmergy and local perception. The robots are equipped with an omni-directional CCD camera; microphones; IR proximity sensors; accelerometers; and inclinometers. The s-bots were designed to be used for scouting purposes, but can be reconfigured and synchronized for a variety of different tasks. The robots comprising a swarm can climb the inner vertical walls of pipes by exerting a force towards the pipe walls and by jointly moving forward at the same time. The robots are able to monitor their peers as well as the integrity of the pipe surface by using the cameras attached to their heads and the light emitter diodes and diverse light sensors located on the grippers. When one robot detects an unusual condition, it can alert the other robots by lighting up. A reactive controller that uses artificial neural networks (ANNs) and a knowledge-based system (KBS) to control how the s-bots move in a connected formation inside vertical pipes has also been proposed. It was concluded that the swarm-bots will be able to effectively inspect diverse pipe configurations. 20 refs., 6 figs.

  15. Genetic Optimization and Simulation of a Piezoelectric Pipe-Crawling Inspection Robot

    Science.gov (United States)

    Hollinger, Geoffrey A.; Briscoe, Jeri M.

    2004-01-01

    Using the DarwinZk development software, a genetic algorithm (GA) was used to design and optimize a pipe-crawling robot for parameters such as mass, power consumption, and joint extension to further the research of the Miniature Inspection Systems Technology (MIST) team. In an attempt to improve on existing designs, a new robot was developed, the piezo robot. The final proposed design uses piezoelectric expansion actuators to move the robot with a 'chimneying' method employed by mountain climbers and greatly improves on previous designs in load bearing ability, pipe traversing specifications, and field usability. This research shows the advantages of GA assisted design in the field of robotics.

  16. Overall Thermal Performance of Flexible Piping Under Simulated Bending Conditions

    Science.gov (United States)

    Fesmire, James E.; Augustynowicz, S. D.; Demko, J. A.; Thompson, Karen (Technical Monitor)

    2001-01-01

    Flexible, vacuum-insulated transfer lines for low-temperature applications have higher thermal losses than comparable rigid lines. Typical flexible piping construction uses corrugated tubes, inner and outer, with a multilayer insulation (MLI) system in the annular space. Experiments on vacuum insulation systems in a flexible geometry were conducted at the Cryogenics Test Laboratory of NASA Kennedy Space Center. The effects of bending were simulated by causing the inner tube to be eccentric with the outer tube. The effects of spacers were simulated in a controlled way by inserting spacer tubes for the length of the cylindrical test articles. Two material systems, standard MLI and a layered composite insulation (LCI), were tested under the full range of vacuum levels using a liquid nitrogen boiloff calorimeter to determine the apparent thermal conductivity (k-value). The results indicate that the flexible piping under simulated bending conditions significantly degrades the thermal performance of the insulation system. These data are compared to standard MLI for both straight and flexible piping configurations. The definition of an overall k-value for actual field installations (k(sub oafi)) is described for use in design and analysis of cryogenic piping systems.

  17. Steady-state heat losses in pipes for low-energy district heating

    DEFF Research Database (Denmark)

    Dalla Rosa, Alessandro; Li, Hongwei; Svendsen, Svend

    2010-01-01

    of low-energy DH systems. Various design concepts are considered in this paper: flexible pre-insulated twin pipes with symmetrical or asymmetrical insulation, double pipes, triple pipes. These technologies are potentially energyefficient and cost-effective solutions for DH networks in low-heat density......The synergy between highly energy efficient buildings and low-energy district heating (DH) systems is a promising concept for the optimal integration of energy saving policies and energy supply systems based on renewable energy (RE). Distribution heat losses represent a key factor in the design...... areas. We start with a review of theories and methods for steady-state heat loss calculation. Next, the article shows how detailed calculations with 2D-modeling of pipes can be carried out by means of computer software based on the finite element method (FEM). The model was validated by comparison...

  18. An overview of environmental degradation of materials in nuclear power plant piping systems

    Energy Technology Data Exchange (ETDEWEB)

    Shack, W.J.

    1987-08-01

    Piping in light water reactor (LWR) power systems is affected by several types of environmental degradation: intergranular stress corrosion cracking (IGSCC) of austenitic stainless steel piping in boiling water reactors (BWRs) has required research, inspection, and mitigation programs that will ultimately cost several billion dollars; erosion-corrosion of carbon steel piping has been observed frequently in the secondary systems of both BWRs and pressurized water reactors (PWRs); the effect of the BWR environment can greatly diminish the design margin inherent in the ASME Section III fatigue design curves for carbon steel piping; and cast stainless steels are subject to embrittlement after extended thermal aging at reactor operating temperatures. These problems are being addressed by wide-ranging research programs in this country and abroad. The purpose of this review is to highlight some of the accomplishments of these programs and to note some of the remaining unanswered questions.

  19. 46 CFR 154.310 - Cargo piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping systems. 154.310 Section 154.310 Shipping... Arrangements § 154.310 Cargo piping systems. Cargo liquid or vapor piping must: (a) Be separated from other piping systems, except where an interconnection to inert gas or purge piping is required by §...

  20. 46 CFR 154.500 - Cargo and process piping standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo and process piping standards. 154.500 Section 154... Equipment Cargo and Process Piping Systems § 154.500 Cargo and process piping standards. The cargo liquid and vapor piping and process piping systems must meet the requirements in §§ 154.503 through...

  1. 46 CFR 119.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 119.730 Section... INSTALLATION Piping Systems § 119.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1) Non-vital systems; (2) Aluminum fuel piping on...

  2. Stress Analysis of the Subsea Dynamic Riser BaseProcess Piping

    Institute of Scientific and Technical Information of China (English)

    Xuanze Ju; Wei Fang; Hanjun Yin; Ying Jiang

    2014-01-01

    Thesubsea dynamic riser base(SDRB)is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand , as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.

  3. Application of heat pipe technology in permanent mold casting of nonferrous alloys

    Science.gov (United States)

    Elalem, Kaled

    The issue of mold cooling is one, which presents a foundry with a dilemma. On the one hand; the use of air for cooling is safe and practical, however, it is not very effective and high cost. On the other hand, water-cooling can be very effective but it raises serious concerns about safety, especially with a metal such as magnesium. An alternative option that is being developed at McGill University uses heat pipe technology to carry out the cooling. The experimental program consisted of designing a permanent mold to produce AZ91E magnesium alloy and A356 aluminum alloy castings with shrinkage defects. Heat pipes were then used to reduce these defects. The heat pipes used in this work are novel and are patent pending. They are referred to as McGill Heat Pipes. Computer modeling was used extensively in designing the mold and the heat pipes. Final designs for the mold and the heat pipes were chosen based on the modeling results. Laboratory tests of the heat pipe were performed before conducting the actual experimental plan. The laboratory testing results verified the excellent performance of the heat pipes as anticipated by the model. An industrial mold made of H13 tool steel was constructed to cast nonferrous alloys. The heat pipes were installed and initial testing and actual industrial trials were conducted. This is the first time where a McGill heat pipe was used in an industrial permanent mold casting process for nonferrous alloys. The effects of cooling using heat pipes on AZ91E and A356 were evaluated using computer modeling and experimental trials. Microstructural analyses were conducted to measure the secondary dendrite arm spacing, SDAS, and the grain size to evaluate the cooling effects on the castings. The modeling and the experimental results agreed quite well. The metallurgical differences between AZ91E and A356 were investigated using modeling and experimental results. Selected results from modeling, laboratory and industrial trials are presented. The

  4. Piping inspection carriage having axially displaceable sensor

    Science.gov (United States)

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  5. Wave Propagation in Pipe-like Structures

    DEFF Research Database (Denmark)

    Morsbøl, Jonas

    Pipe-like shell structures are found in a wide range of practical applications such as: Wind turbine towers, jet engines, brass instruments, and piping systems. For many of these applications, structural vibrations play an important role for their performance. This thesis will in particular focus...... on how the curvature on a thin-walled pipe, as well as a changing radius along a straight thin-walled pipe, affects the waveguide properties. It shows that the waveguide properties of curved pipes roughly can be divided into three regimes: The curved beam regime, the cylinder regime, and the torus regime....... In the curved beam regime the waveguide properties of the pipe can be approximated by classical curved beam theory while in the cylinder regime they can be approximated by cylindrical shell theory. In the torus regime none of the two other regimes apply, and a full-blown shell model is needed. For the straight...

  6. Lightweight Heat Pipes Made from Magnesium

    Science.gov (United States)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  7. Intermediate Temperature Fluids for Heat Pipes and Loop Heat Pipes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop heat pipe and loop heat pipe (LHP) working fluids for what is known as the intermediate...

  8. Preliminary Test of a small heat pipe for hybrid control rod in-core passive decay heat removal system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, In Guk; Ban, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    This paper introduces 'Hybrid control rod' combining its original function and heat removal ability. The high temperature operation and high resistance of radiation should be considered to adopt the hybrid heat pipe at the in-core condition. Other design consideration is to make extra inlet parts because it has a high risk of inlet boundary failure. It means that the introduction of heat pipe system is difficult to present nuclear power plants. The other concepts are presented to out-core cooling design but it has low performance compared with in-core heat removal system. Hybrid heat pipe for in-core heat removal system suggests the solution of these problems. Ultimate objective of this research is to develop the passive emergency decay heat removal system using hybrid heat pipes targeting design bases accidents such as station black-out (SBO) and small break loss of coolant accident (SBLOCA). The purpose of this work is to confirm the performance and heat transfer behavior of hybrid heat pipe. The hybrid heat pipe has special condition for operation. Therefore, it is hard to analyze their behavior in core. Table I shows the characteristics of hybrid heat pipe and consideration for manufacturing the heat pipe.

  9. Variable conductance heat pipe technology for precise temperature control of the NASA/DDLT transmitter

    Science.gov (United States)

    Vanevenhoven, D. E.; Antoniak, D.

    1989-01-01

    The application of variable conductance heat pipe technology for achieving precise temperature control to + or - 0.1 C for a space-based laser diode transmitter is described. Heat pipe theory of operation and test data are presented along with a discussion of its applicability for NASA's Direct Detection Laser Transceiver (DDLT) program. This design for the DDLT transmitter features a reduction in space radiator size and up to 42 percent reduction in prime power requirements.

  10. BOILING OF WATER AND ORGANIC LIQUIDS ON LOW-TEMPERATURE POROUS SURFACES OF HEAT PIPES

    OpenAIRE

    Шаповал, Андрій Андрійович; Панов, Євген Миколайович; Сауліна, Юлія Валеріївна; Романчук, Борис Васильович; Трубійчук, Р. П.

    2015-01-01

    The experimental study results of the influence of porous metal fiber structures on the intensity of two-phase heat transfer of water and acetone boiling on porous surfaces in conditions of free movement and capillary transport of liquids are presented in the article. The experiments were realized using specially designed experimental installation simulated the operating conditions of heat pipes and thermosyphons. Such conditions are typical for two-phase heat transfer devices – heat pipes an...

  11. The Geometry Optimisation of a Triple Branch Pipe Using Finite Element Method

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2008-01-01

    Full Text Available The paper presents the geometrical optimization of a triple branch pipesubmitted to an internal pressure. The goal of the optimization was todetermine the optimum thickness of piping and branch pipe ribs, in thecondition of reaching admissible values of the stress and displacement.The resistance calculus was realized with Cosmos DesignStar softwareand the geometry was modeled with Microstation Modeler software.

  12. MATHEMATICAL MODEL OF POWER CONSUMPTION FOR SOME OIL PIPE-LINE SECTIONS WITH POOR OPERATIONAL STABILITY

    Directory of Open Access Journals (Sweden)

    J. N. Kolesnik

    2005-01-01

    Full Text Available Mathematical model of power consumption for technologically completed and non-completed oil pipe-line sections with poor operational stability has been developed on the basis of daily indices concerning oil transportation regimes. The model permits to take into account tendencies in power consumption under various time prediction cycles and ranges of oil freight turnover, changes in the bulk and characteristics of the transported oil, configuration and design parameters of oil pipe-line.

  13. 热管冷却型月球堆的辐射屏蔽设计研究%Radiation Shielding Design for a Heat Pipe Cooled Lunar Surface Reactor

    Institute of Scientific and Technical Information of China (English)

    杜金峰; 宋旺旺; 王三丙; 谢奇林; 范晓强; 梁文峰

    2016-01-01

    针对40 kWe热管型月球堆的辐射屏蔽问题,建立了三维蒙特卡罗计算模型。屏蔽布局方式整体采用地埋式,堆芯上方的轴向屏蔽体则采用影锥构形,选取适用温度范围宽、耐辐照的碳化硼作为中子屏蔽材料,伽玛屏蔽材料则采用钨,模拟计算了空腔及钨层厚度对轴向屏蔽体后端典型位置的辐射影响,同时也考察了百米外人员所受剂量随径向屏蔽体厚度的变化关系。据此得到了热管型月球堆初步的屏蔽体构型,其总质量为2�15 t ,十年运行寿期内紧靠屏蔽体后端的敏感器件最大中子注量(1 MeV等效)为1�86×1014 cm-2、最大伽玛剂量为3�68 Mrad,而人员剂量仅为11�92 mSv/a,在较大的裕量范围内满足辐射安全要求。%Three⁃dimension Monte Carlo calculation model was built to study the radiation shielding of heat pipe cooled lunar surface reactor with 40kWe. The lunar soil buried shielding method was chosen for the overall layout and the cone⁃shadow configuration was adopted for the axis shielding. B4 C was used for neutron shielding owing to its large range of applicable temperature and high radia⁃tion resistant, and W was adopted for gamma shielding. The radiation fluence on the back end of the axis shielding versus the chamber and W’ s thickness were calculated. The dose for an astronaut 100 m away versus the radial shield thickness was also calculated. The primary shielding configuration was provided and the whole mass was 2�15 t. The maximal neutron fluence (1 MeV equivalent) was 1�86 × 1014 cm-2 and the maximal gama dose for the radiation sensitive component was 3. 68Mrad, dose for an astronaut 100 m away was only 11�92 mSv/a. The shield design can satisfy the shielding requirements with a large margin.

  14. Pipes under internal pressure and bending

    CERN Document Server

    Catinaccio, A

    2009-01-01

    This article covers the general behaviour of a straight uniform pipe, with built-in open ends, subject to internal pressure and in plane bending or curvature. It is intended as a summary of the basic equations driving the unintuitive phenomena of bending and instability of pipes under internal pressure. The analysis covers in addition the investigation of opposite pressure stabilisation effects that can be observed in some orthotropic material pipes like composite pressure hoses.

  15. Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    OpenAIRE

    2016-01-01

    The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled wi...

  16. Kovar Micro Heat Pipe Substrates for Microelectronic Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Benson, David A.; Burchett, Steven N.; Kravitz, Stanley H.; Robino, Charles V.; Schmidt, Carrie; Tigges, Chris P.

    1999-04-01

    We describe the development of a new technology for cooling microelectronics. This report documents the design, fabrication, and prototype testing of micro scale heat pipes embedded in a flat plate substrate or heat spreader. A thermal model tuned to the test results enables us to describe heat transfer in the prototype, as well as evaluate the use of this technology in other applications. The substrate walls are Kovar alloy, which has a coefficient of thermal expansion close to that of microelectronic die. The prototype designs integrating micro heat pipes with Kovar enhance thermal conductivity by more than a factor of two over that of Kovar alone, thus improving the cooling of micro-electronic die.

  17. Heat pipes as perspective base elements of heat recovery in heat supply and ventilating systems

    Directory of Open Access Journals (Sweden)

    Matveev Andrey

    2017-01-01

    Full Text Available Thermotechnical characteristics of heat pipes are considered as high-efficient heat-transfer devices, which can provide energy-saving technologies for heat supply and ventilating systems and for different branches of industry. Thermotechnical and working (”performance capability” characteristics of heat pipes are investigated. By ”performance capability” of heat pipes and heat-transfer devices on heat pipes we mean the system state, where it can perform set functions and keep parameter values (thermal power, conductivity, thermal resistance, heat-transfer coefficient, temperature level and differential, etc. within the regulations of standardized specifications. The article presents theoretical and experimental methods of «gaslock» length determination on noncondensable gases during long-lasting tests of ammonia heat pipes made of aluminum shape АS – КRА 7.5 – R1 (alloy АD – 31. The paper gives results of research of thermotechnical characteristics of heat pipes in horizontal and vertical states (separate and as a set part while using different systems of thermal insulation. The obtained results of thermotechnical and resource tests show the advantages of ammonia heat pipes as basic elements for heat exchanger design in heating and ventilation systems.

  18. Pipe wall damage detection by electromagnetic acoustic transducer generated guided waves in absence of defect signals.

    Science.gov (United States)

    Vasiljevic, Milos; Kundu, Tribikram; Grill, Wolfgang; Twerdowski, Evgeny

    2008-05-01

    Most investigators emphasize the importance of detecting the reflected signal from the defect to determine if the pipe wall has any damage and to predict the damage location. However, often the small signal from the defect is hidden behind the other arriving wave modes and signal noise. To overcome the difficulties associated with the identification of the small defect signal in the time history plots, in this paper the time history is analyzed well after the arrival of the first defect signal, and after different wave modes have propagated multiple times through the pipe. It is shown that the defective pipe can be clearly identified by analyzing these late arriving diffuse ultrasonic signals. Multiple reflections and scattering of the propagating wave modes by the defect and pipe ends do not hamper the defect detection capability; on the contrary, it apparently stabilizes the signal and makes it easier to distinguish the defective pipe from the defect-free pipe. This paper also highlights difficulties associated with the interpretation of the recorded time histories due to mode conversion by the defect. The design of electro-magnetic acoustic transducers used to generate and receive the guided waves in the pipe is briefly described in the paper.

  19. Phase change driving mechanism and modeling for heat pipe with porous wick

    Institute of Scientific and Technical Information of China (English)

    LIU Wei; LIU ZhiChun; YANG Kun; TU ZhengKai

    2009-01-01

    According to heat pipe theory,capillary force is the only driving force for the circle of working fluid in heat pipe with porous wick.By developing a simulating circuit of liquid and vapor flow in heat pipe with porous wick,this paper presents a new driving mechanism which is from phase change of fluid.Furthermore,by analyzing transport process of working fluid between evaporation and condensation in terfaces,a mathematical model is developed to describe this driving mechanism.Besides,calculating examples are given for heat pipe with water as working fluid to predict its driving force and flow resis tance.By applying the model presented in the paper,thermal design and calculation for heat pipe with porous wick,especially for miniature heat pipe,can be made correctly,and phase change driving me chanism of working fluid can be explained,which thereby leads to a better understanding of heat transfer limitation of heat pipe with porous wick.

  20. Heat transfer intensification by increasing vapor flow rate in flat heat pipes

    Science.gov (United States)

    Sprinceana, Silviu; Mihai, Ioan; Beniuga, Marius; Suciu, Cornel

    2015-02-01

    Flat heat pipes have various technical applications, one of the most important being the cooling of electronic components[9]. Their continuous development is due to the fact that these devices permit heat transfer without external energetic contribution. The practical exploitation of flat heat pipes however is limited by the fact that dissipated power can only reach a few hundred watts. The present paper aims to advance a new method for the intensification of convective heat transfer. A centrifugal mini impeller, driven by a turntable which incorporates four permanent magnets was designed. These magnets are put in motion by another rotor, which in its turn includes two permanent magnets and is driven by a mini electrical motor. Rotation of the centrifugal blades generates speed and pressure increase of the cooling agent brought to vapor state within the flat micro heat pipe. It's well known that the liquid suffers biphasic transformations during heat transfer inside the heat pipe. Over the hotspot (the heat source being the electronic component) generated at one end of the heat pipe, convective heat transfer occurs, leading to sudden vaporization of the liquid. Pressures generated by newly formed vapors push them towards the opposite end of the flat heat pipe, where a finned mini heat sink is usually placed. The mini-heat exchanger is air-cooled, thus creating a cold spot, where vapors condensate. The proposed method contributes to vapor flow intensification by increasing their transport speed and thus leading to more intense cooling of the heat pipe.