WorldWideScience

Sample records for pipe whip

  1. A study on the experimental verification for the pipe whip problem in a Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yeong Shin; Choi, Myeong Hwan; Kim, Yeong Wan; Hyeon, Joong Sup; Han, Jae Do; Kang, Yun Gee [Chungnam National Univ., Taejon (Korea, Republic of)

    1993-12-15

    The purpose of this study is to investigate on the experimental verification analysis for the pipe whip problems and to obtain the quantitative evaluation technologies for the design technique of pipe whip restraints. These will contribute to the advance of nuclear regulatory technologies and enhance nuclear power plant safety. This study presents the experimental and transient analytical results of pipe whip tests using the 4', 6' diameter pipe and U-shaped restraints. In the tests, the effects of the overhang length, clearance, impact height on the pipe whip behavior of the pipe-restraints were investigated. The transient impact analysis of the pipe-restraint system was conducted by the finite element program ABAQUS. The applicability of the ABAQUS program to the pipe whip analysis is made clear through this analysis.

  2. A computational procedure for the investigation of whipping effect on ITER High Energy Piping and its application to the ITER divertor primary heat transfer system

    Energy Technology Data Exchange (ETDEWEB)

    Spagnuolo, G.A., E-mail: Alessandro.Spagnuolo@kraftanlagen.com [Kraftanlagen Heidelberg Gmbh, Im Breitspiel 7, D-69126 Heidelberg (Germany); Dell’Orco, G. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Di Maio, P.A. [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo Viale delle Scienze, 90128 Palermo (Italy); Mazzei, M. [Kraftanlagen Heidelberg Gmbh, Im Breitspiel 7, D-69126 Heidelberg (Germany)

    2015-10-15

    Highlights: • High Energy Piping (HEP) are components containing water or steam with P ≥ 2.0 MPa and/or T ≥ 100 °C. • The whipping effect in HEP may cause dangerous domino effect with relative rupture propagation. • The rapture is envisaged or postulated according to the stress state of piping. • A FEM analysis is performed in order to study the dynamic of whipping effect. • Study of special support to avoid and/or mitigate the whipping effect. - Abstract: The Tokamak Cooling Water System of nuclear facility has the function to remove heat from plasma facing components maintaining coolant temperatures, pressures and flow rates as required and, depending on thermal-hydraulic requirements, its systems are defined as High Energy Piping (HEP) because they contain fluids, such as water or steam, at a pressure greater than or equal to 2.0 MPa and/or at a temperature greater than or equal to 100 °C, or even gas at pressure above the atmospheric one. The French standards contemplate the need to consider the whipping effect on HEP design. This effect happens when, after a double ended guillotine break, the reaction force could create a displacement of the piping which might affect adjacent components. A research campaign has been performed, in cooperation by ITER Organization and University of Palermo, to outline the procedure to check whether whipping effect might occur and assess its potential damage effects so to allow their mitigation. This procedure is based on the guidelines issued by U.S. Nuclear Regulatory Commission. The proposed procedure has been applied to the analysis of the whipping effect of divertor primary heat transfer system HEP, using a theoretical–computational approach based on the finite element method.

  3. 7 CFR 58.346 - Whipped butter.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Whipped butter. 58.346 Section 58.346 Agriculture... Products Bearing Usda Official Identification § 58.346 Whipped butter. (a) The quality requirements for whipped butter shall be in accordance with the U.S. Standards for Grades of Whipped Butter for U.S....

  4. Wiggly whipped inflation

    Energy Technology Data Exchange (ETDEWEB)

    Hazra, Dhiraj Kumar; Shafieloo, Arman [Asia Pacific Center for Theoretical Physics, Pohang, Gyeongbuk 790-784 (Korea, Republic of); Smoot, George F. [Paris Centre for Cosmological Physics, APC (CNRS), Université Paris Diderot, Université Sorbonne Paris Cité, Paris 75013 (France); Starobinsky, Alexei A., E-mail: dhiraj@apctp.org, E-mail: arman@apctp.org, E-mail: gfsmoot@lbl.gov, E-mail: alstar@landau.ac.ru [Landau Institute for Theoretical Physics RAS, Moscow 119334 (Russian Federation)

    2014-08-01

    Motivated by BICEP2 results on the CMB polarization B-mode which imply primordial gravitational waves are produced when the Universe has the expansion rate of about H ≈ 10{sup 14} GeV, and by deviations from a smooth power-law behavior for multipoles ℓ <50 in the CMB temperature anisotropy power spectrum found in the WMAP and Planck experiments, we have expanded our class of large field inflationary models that fit both the BICEP2 and Planck CMB observations consistently. These best-fitted large field models are found to have a transition from a faster roll to the slow roll V(φ)=m{sup 2} φ{sup 2}/2 inflation at a field value around 14.6 M{sub Pl} and thus a potential energy of V(φ) ∼ (10{sup 16} GeV){sup 4}. In general this transition with sharp features in the inflaton potential produces not only suppression of scalars relative to tensor modes at small k but also introduces wiggles in the primordial perturbation spectrum. These wiggles are shown to be useful to explain some localized features in the CMB angular power spectrum and can also have other observational consequences. Thus, primordial GW can be used now to make a tomography of inflation determining its fine structure. The resulting Wiggly Whipped Inflation scenario is described in details and the anticipated perturbation power spectra, CMB power spectra, non-Gaussianity and other observational consequences are calculated and compared to existing and forthcoming observations.

  5. Whip antenna design for portable rf systems

    Science.gov (United States)

    Ponnapalli, Saila; Canora, Frank J.

    1995-12-01

    Whip type antennas are probably the most commonly used antennas in portable rf systems, such as cordless and cellular phones, rf enabled laptop computers, personal digital assistants (PDAs), and handheld computers. Whip antennas are almost always mounted on the chassis which contains the radio and other electronics. The chassis is usually a molded plastic which is coated with a conducting paint for EMI purposes. The chassis which appears as a lossy conductor to the antenna, has several effects -- detuning, altering the gain of the antenna, and shadowing its radiation pattern. Extensive modeling and measurements must be performed in order to fully characterize the affects of the chassis on the whip antenna, and to optimize antenna type, orientation and position. In many instances, modeling plays a more important role in prediction of the performance of whip antennas, since measurements become difficult due to the presence of common mode current on feed cables. In this paper models and measurements are used to discuss the optimum choice of whip antennas and the impact of the chassis on radiation characteristics. A modeling tool which has been previously described and has been successfully used to predict radiated field patterns is used for simulations, and measured and modeled results are shown.

  6. Effect of sorbitan monostearate on the physical characteristics and whipping properties of whipped cream.

    Science.gov (United States)

    Zhao, Qiangzhong; Kuang, Wanmei; Long, Zhao; Fang, Min; Liu, Daolin; Yang, Bao; Zhao, Mouming

    2013-12-01

    In this work, the effects of sorbitan monostearate (Span 60) level on the particle size distribution, microstructure and apparent viscosity of the emulsion were investigated. Average particle size (d4,3), surface protein concentration, partial coalescence of fat and overrun of whipped cream during whipping were also determined. As Span 60 level increased (0-0.8%) in emulsion, the apparent viscosity was increased gradually, and the particle size range was narrowed, which was also detected by microstructure. A positive effect of whipping time was observed on the average particle size, partial coalescence of fat, surface protein concentration and overrun during whipping, respectively. An increase of Span 60 level resulted in a reduction of d4,3 values and partial coalescence of fat during 0-1 min whipping, then increasing after whipping for 2-5 min (0.6% Span 60 as the critical level). A negative behaviour was observed between surface protein concentration and Span 60. Moreover, Span 60 could improve the overrun and organoleptic properties of whipped cream efficiently. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. 21 CFR 131.157 - Light whipping cream.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Light whipping cream. 131.157 Section 131.157 Food... HUMAN CONSUMPTION MILK AND CREAM Requirements for Specific Standardized Milk and Cream § 131.157 Light whipping cream. (a) Description. Light whipping cream is cream which contains not less than 30 percent...

  8. ON-LINE ELIMINATION OF OIL WHIP

    Institute of Scientific and Technical Information of China (English)

    Zheng Shuiying; Liu Shulian

    2005-01-01

    A new method to eliminate the oil whip online is put forward by use of passive electromagnetic damper. The damper works contactless and with DC current. Neither sensor nor closed loop control is needed. The dynamic equations of rotor-bearing system are built up by combining d'Alemdert principle with Rize way, and the nonlinear oil film forces based on unsteady short bearing model are coupled to system. Such nonlinear equations are numerically solved by Newmark integration method. The calculated results show that the bifurcation behavior of the system can be changed and the oil whip of the rotor may be well damped by external damping. The bifurcation diagrams also show that the subharmonic vibration amplitude decreases in motion and the speed at which the system losses its stability increases obviously by exerting external damping.Then experiments are carried out to demonstrate this phenomenon. It is observed that the complex trajectories of the journal motion are disappeared and the rotor-bearing system became stable when the power of passive electromagnetic damper is turned on. The experiments have good repeatability.

  9. Whipping Instabilities in Electrified Liquid Jets

    CERN Document Server

    Marin, Alvaro G; Loscertales, Ignacio G; Barrero, Antonio

    2008-01-01

    A liquid jet may develop different types of instabilities, like the so-called Rayleigh-Plateau instability, which breaks the jet into droplets. However, another type of instabilities may appear when we electrify a liquid jet and induce some charge at his surface. Among them, the most common is the so-called Whipping Instability, which is characterized by violent and fast lashes of the jet. In the submitted fluid dynamic video(see http://hdl.handle.net/1813/11422), we will show an unstable charged glycerine jet in a dielectric liquid bath, which permits an enhanced visualization of the instability. For this reason, it is probably the first time that these phenomena are visualized with enough clarity to analyze features as the effect of the feeding liquid flow rate through the jet or as the surprising spontaneous stabilization at some critical distance to the ground electrode.

  10. The phylogeny of fossil whip spiders.

    Science.gov (United States)

    Garwood, Russell J; Dunlop, Jason A; Knecht, Brian J; Hegna, Thomas A

    2017-04-21

    Arachnids are a highly successful group of land-dwelling arthropods. They are major contributors to modern terrestrial ecosystems, and have a deep evolutionary history. Whip spiders (Arachnida, Amblypygi), are one of the smaller arachnid orders with ca. 190 living species. Here we restudy one of the oldest fossil representatives of the group, Graeophonus anglicus Pocock, 1911 from the Late Carboniferous (Duckmantian, ca. 315 Ma) British Middle Coal Measures of the West Midlands, UK. Using X-ray microtomography, our principal aim was to resolve details of the limbs and mouthparts which would allow us to test whether this fossil belongs in the extant, relict family Paracharontidae; represented today by a single, blind species Paracharon caecus Hansen, 1921. Tomography reveals several novel and significant character states for G. anglicus; most notably in the chelicerae, pedipalps and walking legs. These allowed it to be scored into a phylogenetic analysis together with the recently described Paracharonopsis cambayensis Engel & Grimaldi, 2014 from the Eocene (ca. 52 Ma) Cambay amber, and Kronocharon prendinii Engel & Grimaldi, 2014 from Cretaceous (ca. 99 Ma) Burmese amber. We recovered relationships of the form ((Graeophonus (Paracharonopsis + Paracharon)) + (Charinus (Stygophrynus (Kronocharon (Charon (Musicodamon + Paraphrynus)))))). This tree largely reflects Peter Weygoldt's 1996 classification with its basic split into Paleoamblypygi and Euamblypygi lineages; we were able to score several of his characters for the first time in fossils. Our analysis draws into question the monophyly of the family Charontidae. Our data suggest that Graeophonus is a crown group amblypygid, and falls within a monophyletic Paleoamblypgi clade, but outside the family Paracharontidae (= Paracharonopsis + Paracharon). Our results also suggest a new placement for the Burmese amber genus Kronocharon, a node further down from its original position. Overall, we offer a

  11. RNAseq Transcriptional Profiling following Whip Development in Sugarcane Smut Disease.

    Science.gov (United States)

    Schaker, Patricia D C; Palhares, Alessandra C; Taniguti, Lucas M; Peters, Leila P; Creste, Silvana; Aitken, Karen S; Van Sluys, Marie-Anne; Kitajima, João P; Vieira, Maria L C; Monteiro-Vitorello, Claudia B

    2016-01-01

    Sugarcane smut disease is caused by the biotrophic fungus Sporisorium scitamineum. The disease is characterized by the development of a whip-like structure from the primary meristems, where billions of teliospores are produced. Sugarcane smut also causes tillering and low sucrose and high fiber contents, reducing cane productivity. We investigated the biological events contributing to disease symptoms in a smut intermediate-resistant sugarcane genotype by examining the transcriptional profiles (RNAseq) shortly after inoculating the plants and immediately after whip emission. The overall picture of disease progression suggests that premature transcriptional reprogramming of the shoot meristem functions continues until the emergence of the whip. The guidance of this altered pattern is potentially primarily related to auxin mobilization in addition to the involvement of other hormonal imbalances. The consequences associated with whip emission are the modulation of typical meristematic functions toward reproductive organ differentiation, requiring strong changes in carbon partitioning and energy production. These changes include the overexpression of genes coding for invertases and trehalose-6P synthase, as well as other enzymes from key metabolic pathways, such as from lignin biosynthesis. This is the first report describing changes in the transcriptional profiles following whip development, providing a hypothetical model and candidate genes to further study sugarcane smut disease progression.

  12. RNAseq Transcriptional Profiling following Whip Development in Sugarcane Smut Disease

    Science.gov (United States)

    Taniguti, Lucas M.; Peters, Leila P.; Creste, Silvana; Aitken, Karen S.; Van Sluys, Marie-Anne; Kitajima, João P.; Vieira, Maria L. C.; Monteiro-Vitorello, Claudia B.

    2016-01-01

    Sugarcane smut disease is caused by the biotrophic fungus Sporisorium scitamineum. The disease is characterized by the development of a whip-like structure from the primary meristems, where billions of teliospores are produced. Sugarcane smut also causes tillering and low sucrose and high fiber contents, reducing cane productivity. We investigated the biological events contributing to disease symptoms in a smut intermediate-resistant sugarcane genotype by examining the transcriptional profiles (RNAseq) shortly after inoculating the plants and immediately after whip emission. The overall picture of disease progression suggests that premature transcriptional reprogramming of the shoot meristem functions continues until the emergence of the whip. The guidance of this altered pattern is potentially primarily related to auxin mobilization in addition to the involvement of other hormonal imbalances. The consequences associated with whip emission are the modulation of typical meristematic functions toward reproductive organ differentiation, requiring strong changes in carbon partitioning and energy production. These changes include the overexpression of genes coding for invertases and trehalose-6P synthase, as well as other enzymes from key metabolic pathways, such as from lignin biosynthesis. This is the first report describing changes in the transcriptional profiles following whip development, providing a hypothetical model and candidate genes to further study sugarcane smut disease progression. PMID:27583836

  13. To study the performance of Palm Kernel Oil in the use of non dairy whip topping

    Directory of Open Access Journals (Sweden)

    Yogesh R Patel ,

    2015-07-01

    Full Text Available Palm Kernel Oil is most suitable for Non dairy whip topping.The results show that The cream which is produced from PKO is smooth,Glossy and Shine,which has more shelf life than dairy whip topping.This study also shows that, the foam which is produced is more stable in whipping cream.this study also point out advantags of palm kernel oil based whipping cream,particularly when stability of cream is more important.

  14. 21 CFR 131.25 - Whipped cream products containing flavoring or sweetening.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Whipped cream products containing flavoring or... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION MILK AND CREAM General Provisions § 131.25 Whipped cream products containing flavoring or sweetening. The unqualified name “whipped cream” should not be applied...

  15. An investigation of racing performance and whip use by jockeys in thoroughbred races.

    Directory of Open Access Journals (Sweden)

    David Evans

    Full Text Available Concerns have been expressed concerning animal-welfare issues associated with whip use during Thoroughbred races. However, there have been no studies of relationships between performance and use of whips in Thoroughbred racing. Our aim was to describe whip use and the horses' performance during races, and to investigate associations between whip use and racing performance. Under the Australian Racing Board (ARB rules, only horses that are in contention can be whipped, so we expected that whippings would be associated with superior performance, and those superior performances would be explained by an effect of whipping on horse velocities in the final 400 m of the race. We were also interested to determine whether performance in the latter sections of a race was associated with performance in the earlier sections of a race. Measurements of whip strikes and sectional times during each of the final three 200 metre (m sections of five races were analysed. Jockeys in more advanced placings at the final 400 and 200 m positions in the races whipped their horses more frequently. Horses, on average, achieved highest speeds in the 600 to 400 m section when there was no whip use, and the increased whip use was most frequent in the final two 200 m sections when horses were fatigued. This increased whip use was not associated with significant variation in velocity as a predictor of superior placing at the finish.

  16. Calorie reduction of chocolate ganache through substitution of whipped cream

    Directory of Open Access Journals (Sweden)

    Yu Jin Kim

    2017-03-01

    Full Text Available Chocolate has been around for 3,000 years and is loved by many people for as long as its history. However, chocolate is classified as a high calorie food due to the high fat and sugar contents. These contents have negative effects on health, such as obesity, so some people have concerns about chocolate. Nevertheless, it has attracted more attention recently due to functional ingredients such as polyphenols and flavonoids of cacao, which is a main component of chocolate. This study was conducted to reduce the fat content in chocolate, which is the biggest disadvantage of chocolate. We investigated the physicochemical properties of different kinds of chocolate ganache made of whipped cream, milk, vegetable cream, and coconut milk. The whipped cream chocolate ganache was considered as the control group. The added ingredients affected moisture, crude fat, sugar contents, hardness, and influenced every result of the tests performed. The whipped cream chocolate ganache with the lowest moisture and highest fat contents showed the same result (the lowest moisture contents and highest fat contents; p < 0.05 and resulted in average hardness. The vegetable cream chocolate ganache showed similar results to that of the whipped cream’s result above, except in the category of hardness. The vegetable cream chocolate ganache showed a high circumference, height, and hardness. Milk chocolate, with the highest moisture and lowest fat content, showed identical results with the whipped cream’s result. In circumference, height and hardness, milk chocolate ganache showed the highest circumference (p < 0.05, a low height, and a similar value to whipped cream, but coconut milk also showed low values of circumferences and hardness. Overall, the whipped cream chocolate ganache was the most preferred chocolate in the sensory test, but the coconut milk chocolate ganache was the softest chocolate among the cream replacements. Because of its low caloric content and

  17. Instant foam physics. Formation and stability of aerosol whipped cream.

    NARCIS (Netherlands)

    Wijnen, M.E.

    1997-01-01

    The formation and stability of aerosol whipped cream, as an example of an instant foam, were studied from a physical point of view. Instant foam production out of an aerosol can is based on the principle that a soluble gas (laughing gas) is dissolved under elevated pressure (5-10 bar) in the product

  18. Assessment of whipping and springing on a large container vessel

    Directory of Open Access Journals (Sweden)

    Barhoumi Mondher

    2014-06-01

    Full Text Available Wave induced vibrations increase the fatigue and extreme loading, but this is normally neglected in design. The industry view on this is changing. Wave induced vibrations are often divided into springing and whipping, and their relative contribution to fatigue and extreme loading varies depending on ship design. When it comes to displacement vessels, the contribution from whipping on fatigue and extreme loading is particularly high for certain container vessels. A large modern design container vessel with high bow flare angle and high service speed has been considered. The container vessel was equipped with a hull monitoring system from a recognized supplier of HMON systems. The vessel has been operating between Asia and Europe for a few years and valuable data has been collected. Also model tests have been carried out of this vessel to investigate fatigue and extreme loading, but model tests are often limited to head seas. For the full scale measurements, the correlation between stress data and wind data has been investigated. The wave and vibration damage are shown versus heading and Beaufort strength to indicate general trends. The wind data has also been compared to North Atlantic design environment. Even though it has been shown that the encountered wind data has been much less severe than in North Atlantic, the extreme loading defined by IACS URS11 is significantly exceeded when whipping is included. If whipping may contribute to collapse, then proper seamanship may be useful in order to limit the extreme loading. The vibration damage is also observed to be high from head to beam seas, and even present in stern seas, but fatigue damage in general is low on this East Asia to Europe trade.

  19. Influence of Whipping on Long term Vertical Bending Moment

    DEFF Research Database (Denmark)

    Baarholm, G. S.; Jensen, Jørgen Juncher

    2004-01-01

    This paper is concerned with estimating the response value corresponding to a long return period, say a twenty years. Time domain simulation is required to obtain the nonlinear response, and long time series are required to limit the statistical uncertainty in the simulations. It is crucial to in......). Results are presented for the S-175 container ship, (15th & 16th ITTC Seakeeping Committee 1983). The analysis shoes that whipping increases the vertical bending moment and that the correlation is significant...

  20. Whip use by jockeys in a sample of Australian Thoroughbred races--an observational study.

    Directory of Open Access Journals (Sweden)

    Paul D McGreevy

    Full Text Available The use of whips by jockeys is an issue. The current study viewed opportunistic high-speed footage of 15 race finishes frame-by-frame to examine the outcomes of arm and wrist actions (n = 350 on 40 horses viewed from the left of the field. Any actions fully or partially obscured by infrastructure or other horses were removed from the database, leaving a total of 104 non-contact sweeps and 134 strikes. For all instances of arm actions that resulted in fully visible whip strikes behind the saddle (n = 109, the outcomes noted were area struck, percentage of unpadded section making contact, whether the seam made contact and whether a visible indentation was evident on impact. We also recorded use of clockwise or counter-clockwise arm action from each jockey's whip, whether the whip was held like a tennis racquet or a ski pole, whether the hind leg on the side of the impact was in stance or swing phase and whether the jockey's arm was seen traveling above shoulder height. The goal of the study was to characterize the area struck and the visual impact of whip use at the level of the horse. We measured the ways in which both padded and unpadded sections of the whip made impact. There was evidence of at least 28 examples, in 9 horses, of breaches of the whip rules (one seam contact, 13 contacts with the head, and 14 arm actions that rose above the height of the shoulder. The whip caused a visible indentation on 83% of impacts. The unpadded section of the whip made contact on 64% of impacts. The results call into question the ability of Stewards to effectively police the rules concerning whip use and, more importantly, challenge the notion that padding the distal section of whips completely safeguards horses from any possible whip-related pain.

  1. Hydro-elastic response of ship structures to slamming induced whipping

    NARCIS (Netherlands)

    Tuitman, J.T.

    2010-01-01

    Slamming induced whipping can significantly increase the structural loading of ships. Although this is well-known, the whipping contribution to the structural loading is rarely taken into account when computing the structural loading. An exception are the "dynamic loading" factors found in Classific

  2. Functional anatomy of the pretarsus in whip spiders (Arachnida, Amblypygi).

    Science.gov (United States)

    Wolff, Jonas O; Seiter, Michael; Gorb, Stanislav N

    2015-11-01

    Whip spiders (Amblypygi) are a small, cryptic order of arachnids mainly distributed in the tropics. Some basal lineages (families Charinidae and Charontidae) have adhesive pads on the tips of their six walking legs. The present study describes the macro- and ultrastructure of these pads and investigates their contact mechanics and adhesive strength on smooth and rough substrates. Furthermore, the structure of the pretarsus and its kinematics are compared in Charon cf. grayi (with an adhesive pad) and Phrynus longipes (without an adhesive pad). The adhesive pads exhibit an elaborate structure with a unique combination of structural features of smooth and hairy foot pads including a long transversal contact zone performing lateral detachment, a thick internally-branched cuticle with longitudinal ribs and hexagonal surface microstructures with spatulate keels. The contact area of the pads on smooth glass is discontinuous due to the spatulate microstructures with a discontinuous detachment, which could be observed in vivo by high speed videography at a rate of up to 10,000 fps. Adhesive strength was measured with vertical whole animal pull-off tests, obtaining mean values between 55 and 200 kPa. The occurrence of viscous lipid secretions between microstructures was occasionally observed, which, however, seems not to be a necessity for good foothold. The results are discussed in relation to the whip spider's ecology and evolution. Structure-function relationships of the adhesive pads are compared to those of insects and vertebrates.

  3. Whip Rule Breaches in a Major Australian Racing Jurisdiction: Welfare and Regulatory Implications

    Science.gov (United States)

    Hood, Jennifer; McDonald, Carolyn; Wilson, Bethany; McManus, Phil; McGreevy, Paul

    2017-01-01

    Simple Summary An evidence-based analysis of whip rule breaches in horse racing is needed to address community expectations that racehorses are treated humanely. The study provides the first peer-reviewed characterisation of whip rule breaches and their regulatory outcomes in horseracing, and considers the relationship between rules affecting racing integrity and the welfare of racehorses in a major Australian racing jurisdiction. Abstract Whip use in horseracing is increasingly being questioned on ethical, animal welfare, social sustainability, and legal grounds. Despite this, there is weak evidence for whip use and its regulation by Stewards in Australia. To help address this, we characterised whip rule breaches recorded by Stewards using Stewards Reports and Race Diaries from 2013 and 2016 in New South Wales (NSW) and the Australian Capital Territory (ACT). There were more recorded breaches at Metropolitan (M) than Country (C) or Provincial (P) locations, and by riders of horses that finished first, second, or third than by riders of horses that finished in other positions. The most commonly recorded breaches were forehand whip use on more than five occasions before the 100-metre (m) mark (44%), and whip use that raises the jockey’s arm above shoulder height (24%). It is recommended that racing compliance data be analysed annually to inform the evidence-base for policy, education, and regulatory change, and ensure the welfare of racehorses and racing integrity.

  4. Extrapolation of model tests measurements of whipping to identify the dimensioning sea states for container ships

    DEFF Research Database (Denmark)

    Storhaug, Gaute; Andersen, Ingrid Marie Vincent

    2015-01-01

    Whipping can contribute to increased fatigue and extreme loading of container ships, and guidelines have been made available by the leading class societies. Reports concerning the hogging collapse of MSC Napoli and MOL Comfort suggest that whipping contributed. The accidents happened in moderate...... to small storms. Model tests of three container ships have been carried out in different sea states under realistic assumptions. Preliminary extrapolation of the measured data suggested that moderate storms are dimensioning when whipping is included due to higher maximum speed in moderate storms...

  5. Tactile learning by a whip spider, Phrynus marginemaculatus C.L. Koch (Arachnida, Amblypygi).

    Science.gov (United States)

    Santer, Roger D; Hebets, Eileen A

    2009-04-01

    The ability of animals to learn and remember underpins many behavioural actions and can be crucial for survival in certain contexts, for example in finding and recognising a habitual refuge. The sensory cues that an animal learns in such situations are to an extent determined by its own sensory specialisations. Whip spiders (Arachnida, Amblypygi) are nocturnal and possess uniquely specialised sensory systems that include elongated 'antenniform' forelegs specialised for use as chemo- and mechanosensory feelers. We tested the tactile learning abilities of the whip spider Phrynus marginemaculatus in a maze learning task with two tactile cues of different texture--one associated with an accessible refuge, and the other with an inaccessible refuge. Over ten training trials, whip spiders got faster and more accurate at finding the accessible refuge. During a subsequent test trial where both refuges were inaccessible, whip spiders searched for significantly longer at the tactile cue previously associated with the accessible refuge. Using high-speed cinematography, we describe three distinct antenniform leg movements used by whip spiders during tactile examination. We discuss the potential importance of tactile learning in whip spider behaviour and a possible role for their unique giant sensory neurons in accessing tactile information.

  6. Whip Rule Breaches in a Major Australian Racing Jurisdiction: Welfare and Regulatory Implications.

    Science.gov (United States)

    Hood, Jennifer; McDonald, Carolyn; Wilson, Bethany; McManus, Phil; McGreevy, Paul

    2017-01-16

    Whip use in horseracing is increasingly being questioned on ethical, animal welfare, social sustainability, and legal grounds. Despite this, there is weak evidence for whip use and its regulation by Stewards in Australia. To help address this, we characterised whip rule breaches recorded by Stewards using Stewards Reports and Race Diaries from 2013 and 2016 in New SouthWales (NSW) and the Australian Capital Territory (ACT). There were more recorded breaches at Metropolitan (M) than Country (C) or Provincial (P) locations, and by riders of horses that finished first, second, or third than by riders of horses that finished in other positions. The most commonly recorded breaches were forehand whip use on more than five occasions before the 100-metre (m) mark (44%), and whip use that raises the jockey's arm above shoulder height (24%). It is recommended that racing compliance data be analysed annually to inform the evidence-base for policy, education, and regulatory change, and ensure the welfare of racehorses and racing integrity.

  7. A rare finding of mites (Arachnida: Acari: Leeuwenhoekiidae) parasitising a whip spider (Arachnida: Amblypygi: Charinidae).

    Science.gov (United States)

    Gonçalves-Souza, Thiago; Giupponi, Alessandro P L; Hernandes, Fabio A

    2014-04-01

    Twelve larvae of unidentified species of Odontacarus Ewing, 1929 (Acari: Leeuwenhoekiidae) were found parasitising an adult male whip spider Charinus brasilianus Weygoldt (Charinidae) in Santa Teresa, mountainous region of Espirito Santo state, southeastern Brazil. These larvae occurred in the intersegmental membrane of prosoma and legs. This is the first report of ectoparasitic mites infecting a charinid whip spider and the first record of leeuwenhoekiid mites parasitising an invertebrate host. We suggest that future studies are essential to understand the reasons why these events of parasitism are so rare in the order Amblypygi.

  8. Liver Trauma in the Kitchen: Preparing Whipped Cream with a Siphon Is Not without Risk

    Directory of Open Access Journals (Sweden)

    Jeremy Bourenne

    2015-01-01

    Full Text Available We report the case of a 36-year-old woman suffering from liver injury caused by the malfunction of a whipped cream siphon. When this patient handled the whipped cream siphon, the screwed metallic upper part of the siphon was suddenly dissociated from its base and came violently striking her right hypochondrium. At first, the severity of injury was underestimated. Subsequently, due to the persistence of pain experienced by the patient, an abdominal CT scan was performed. It highlighted a severe liver injury with rupture of a branch of the hepatic artery. The evolution was favorable after completion of an embolization and a secondary capsular rupture.

  9. Whipping Instability of Electrodriven Jets and Production of Micro- and Nano-fibers.

    Science.gov (United States)

    Fridrikh, Sergey; Yu, Jian; Brenner, Michael; Rutledge, Gregory

    2003-03-01

    Electrodriven jets of polymeric fluids undergo a set of hydrodynamic instabilities causing either breaking of the jet into the droplets (electrospraying) or dramatic thinning of the jet and resulting in production of superfine fibers with diameters ranging form 10nm to 10micron (electrospinning). We present here a theoretical analysis of the whipping instability responsible for the thinning of the jet. The model tackles non-linear aspects or whipping behavior and predicts several important features of unstable electrodriven jet such as the final diameter. We find the model predictions to agree well with our experimental data.

  10. Emulsion droplet spreading at air/water interfaces: mechanisms and relevance to the whipping of cream

    NARCIS (Netherlands)

    Hotrum, N.E.

    2004-01-01

    Keywords:emulsion, spreading coefficient, surface tension, emulsifier, whipped cream, dairy foam, partial coalescence In this thesis, the interaction between emulsion droplets and expanding air/water interfaces was investigated. The

  11. 3DFEM-3DBEM model for springing and whipping analysis of ships

    NARCIS (Netherlands)

    Malenica, S.; Tuitman, J.T.

    2008-01-01

    The paper deals with the modeling of the wave induced ship structural vibrations. The presented method is fully integrated in both the linear frequency domain and non-linear time domain seakeeping calculations. Due to the transient non-linear nature of slamming loading, the corresponding whipping re

  12. Research on Protection Capability of Flying-Whip Multifunctional Explosive Reactive Armor

    Institute of Scientific and Technical Information of China (English)

    张虎生; 张宝(金平); 张庆明; 刘长林

    2004-01-01

    The experimental research on protection capability of the flying-whip multifunctional explosive reactive armor (ERA) was performed, in which the comparison experiment was made on the damage effect of the flying-whip's geometrical figuration, material property and driven velocity on the long-rod armor-piercing-projectile. The moving velocity of the flying-whip driven by different explosives and the pressure attenuation law of shock wave travelling in the back plate were measured respectively with the electric probe method and the manganin piezoresistive gauge technique. The following conclusions based on a great quantity of experimental data were drawn: compared with the sandwich ERA the flying-whip multifunctional ERA has very good protection function against the long-rod armor-piercing-projectile, the shaped charge warhead and the anti-armor tandem warhead. In addition, the composite plate made of the armor-steel and rubber plate can lessen the vibration and shock of the main armor caused by the explosion of the charge.

  13. DEVELOPMENT OF A FUNCTIONAL PURPOSE WHIPPED BREAD WHOLE GRAIN WHEAT, RYE AND WHEAT BRAN

    Directory of Open Access Journals (Sweden)

    G. O. Magomedov

    2015-01-01

    Full Text Available The article discusses the development of whipped bakery products enriched with dietary fiber, minerals, vitamins retinol, tocopherol, group, polyunsaturated fatty acids through the use of rye and wheat bran and flour of wholegrain wheat. The main raw material for enrichment whipped bakery products used wheat bran and rye. Choice of rye and wheat bran as supplementation prepared whipped bread is explained not only from the point of view of the rationality of the use of this secondary raw materials, but also its rich vitamin and mineral composition. Wheat bran contain the necessary man of b vitamins, including B1, B2, B6, PP and others. Found provitamin a (carotene and vitamin E (tocopherol. Bran is rich in mineral substances. Among them potassium, magnesium, chromium, zinc, copper, selenium and other trace elements. Thanks to this composition bran are essential dietary product. They are rich in insoluble fiber and can be useful to reduce the risk of developing colon cancer. Rye bran contain dietary fiber, tocopherol E, thiamin B1, Riboflavin B2, Pantothenic acid B5, B4 (choline, nicotinic acid B3, etc. In the bran rich set of microelements and macroelements such as iron, calcium, magnesium, phosphorus, potassium, zinc, iodine, selenium, chromium, etc. the Introduction in the diet, bran rye contribute to the prevention and treatment of atherosclerosis, diabetes and anemia. They restore blood pressure, reduce blood sugar levels and improve the cardiovascular system. Flour from wholegrain wheat is the main supplier of bread protein and starch, while preserving the maximum of the original nutritional value of the grain, enriched whipped bread macro - and micronutrients. The analysis of the chemical composition of flour from wholegrain wheat, rye and wheat bran leads to the conclusion that the choice of these types of materials suitable for making the recipe whipped bakery products, because their use can increase the content in bread is not only the

  14. Recent evaluations of crack-opening-area in circumferentially cracked pipes

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, S.; Brust, F.; Ghadiali, N.; Wilkowski, G.; Miura, N.

    1997-04-01

    Leak-before-break (LBB) analyses for circumferentially cracked pipes are currently being conducted in the nuclear industry to justify elimination of pipe whip restraints and jet shields which are present because of the expected dynamic effects from pipe rupture. The application of the LBB methodology frequently requires calculation of leak rates. The leak rates depend on the crack-opening area of the through-wall crack in the pipe. In addition to LBB analyses which assume a hypothetical flaw size, there is also interest in the integrity of actual leaking cracks corresponding to current leakage detection requirements in NRC Regulatory Guide 1.45, or for assessing temporary repair of Class 2 and 3 pipes that have leaks as are being evaluated in ASME Section XI. The objectives of this study were to review, evaluate, and refine current predictive models for performing crack-opening-area analyses of circumferentially cracked pipes. The results from twenty-five full-scale pipe fracture experiments, conducted in the Degraded Piping Program, the International Piping Integrity Research Group Program, and the Short Cracks in Piping and Piping Welds Program, were used to verify the analytical models. Standard statistical analyses were performed to assess used to verify the analytical models. Standard statistical analyses were performed to assess quantitatively the accuracy of the predictive models. The evaluation also involved finite element analyses for determining the crack-opening profile often needed to perform leak-rate calculations.

  15. A Critical Analysis of the British Horseracing Authority’s Review of the Use of the Whip in Horseracing

    Directory of Open Access Journals (Sweden)

    Bidda Jones

    2015-03-01

    Full Text Available There is increasing controversy about the use of the whip as a performance aid in Thoroughbred horseracing and its impact on horse welfare. This paper offers a critical analysis of the British Horseracing Authority’s (BHA 2011 Report Responsible Regulation: A Review of the Use of the Whip in Horseracing. It examines the BHA’s process of consultation and use of science and public opinion research through the application of current scientific literature and legal analysis. This analysis suggests that the BHA’s findings on the welfare impact and justification for whip use are insufficiently defended by the report. These findings indicate that the report is an inadequate basis from which to draw any definitive conclusions on the impact of whips on racehorse welfare. Further review is needed, undertaken by an independent scientific body, to advance this debate.

  16. Changing Human-Animal Relationships in Sport: An Analysis of the UK and Australian Horse Racing Whips Debates

    OpenAIRE

    Raewyn Graham; Phil McManus

    2016-01-01

    Simple Summary This paper identifies the various perceptions held by advocates and opponents about the use of the whip in thoroughbred racing, as portrayed in print and social media. Three time periods in two countries were investigated, Australia (2009) and the UK (2011), following the introduction of new whip rules and the period August 2014–August 2015 for both countries to identify whether perceptions had changed. The major area of contention between advocates and opponents was whether th...

  17. Effects of ratio of milk fat to soy bean oil and whipping time on qualities of milk ice cream

    Directory of Open Access Journals (Sweden)

    Sukrit Thaiudom

    2007-01-01

    Full Text Available Qualities of ice cream are based on air cells, ice crystals and fat particles, which are the important parts to build up a good structure of ice cream. Ice cream whipping time also affects the ice cream qualities.This study focused on effects of ratio of milk fat to soy bean oil, whipping time, and their interaction on ice cream mix viscosity, overrun, air cell size, fat destabilization, hardness, melting rate, and shape retention ofice cream. Ice creams with ratio of milk fat to soy bean oil at 100:0, 50:50, 0:100 and whipping time at 15 and 20 min were produced and determined for their qualities. The results showed that ratio of milk fat to soybean oil affected all qualities of ice cream, while duration of whipping time influenced the overrun and air cell size. The interaction of ratio of milk fat to soy bean oil and whipping time affected only overrun. Ice creammix with ratio of milk fat to soy bean oil 100:0 showed the highest apparent viscosity and hardness and the biggest air cell size. Whipping time of ice cream for 20 min showed a bigger size of air cells than the whippingtime for 15 min (p < 0.05. These results can be applied to the manufacture of modified ice cream.

  18. Comparison of fully coupled hydroelastic computation and segmented model test results for slamming and whipping loads

    Directory of Open Access Journals (Sweden)

    Jung-Hyun Kim

    2014-12-01

    Full Text Available This paper presents a numerical analysis of slamming and whipping using a fully coupled hydroelastic model. The coupled model uses a 3-D Rankine panel method, a 1-D or 3-D finite element method, and a 2-D Generalized Wagner Model (GWM, which are strongly coupled in time domain. First, the GWM is validated against results of a free drop test of wedges. Second, the fully coupled method is validated against model test results for a 10,000 twenty-foot equivalent unit (TEU containership. Slamming pressures and whipping responses to regular waves are compared. A spatial distribution of local slamming forces is measured using 14 force sensors in the model test, and it is compared with the integration of the pressure distribution by the computation. Furthermore, the pressure is decomposed into the added mass, impact, and hydrostatic components, in the computational results. The validity and characteristics of the numerical model are discussed.

  19. Effects of the Hot Alignment of a Power Unit on Oil-Whip Instability Phenomena

    Directory of Open Access Journals (Sweden)

    A. Vania

    2010-01-01

    Full Text Available This paper shows the results of the analysis of the dynamic behaviour of a power unit, whose shaft-train alignment was significantly influenced by the machine thermal state, that was affected in operating condition by high subsynchronous vibrations caused by oil-whip instability phenomena. The dynamic stiffness coefficients of the oil-film journal bearings of the generator were evaluated considering the critical average journal positions that caused the instability onsets. By including these bearing coefficients in a mathematical model of the fully assembled machine, the real part of the eigenvalue associated with the first balance resonance of the generator rotor became positive. This paper shows the successful results obtained by combining diagnostic techniques based on mathematical models of journal bearings and shaft train with detailed analyses of monitoring data aimed to investigate the effects of the hot alignment of rotating machines on the occurrence of oil-whip instability onsets.

  20. Correction of a severely rotated maxillary central incisor with the Whip device

    Science.gov (United States)

    Jahanbin, Arezoo; Baghaii, Bahareh; Parisay, Iman

    2009-01-01

    Objective The aim of this case report was to introduce an appliance that can be used for correcting severe rotation of anterior teeth in pre-adolescent children. Appliance design and testing This is a case report of an 11-year-old Iranian boy with a mixed dentition Class I malocclusion defined by a severe rotation of upper left central incisor and a mesiodens between the centrals. The supernumerary tooth was first extracted, and then a Whip device including removable appliance, a cantilever spring and bonded tube on rotated tooth was inserted into his mouth. After 8 months, the upper left central incisor was orthodontically brought into proper alignment. Circumferential supracrestal fibrotomy was done next to overcorrection of the tooth and one week after surgery, the device was removed and the retention was started. Conclusion The whip device, a removable appliance can be very effective for correcting severe rotation of anterior teeth. PMID:24151406

  1. Effects of the Hot Alignment of a Power Unit on Oil-Whip Instability Phenomena

    OpenAIRE

    2010-01-01

    This paper shows the results of the analysis of the dynamic behaviour of a power unit, whose shaft-train alignment was significantly influenced by the machine thermal state, that was affected in operating condition by high subsynchronous vibrations caused by oil-whip instability phenomena. The dynamic stiffness coefficients of the oil-film journal bearings of the generator were evaluated considering the critical average journal positions that caused the instability onsets. By including these ...

  2. Piping Flexibility

    Science.gov (United States)

    1978-01-01

    A NASA computer program aids Hudson Engineering Corporation, Houston, Texas, in the design and construction of huge petrochemical processing plants like the one shown, which is located at Ju'aymah, Saudi Arabia. The pipes handling the flow of chemicals are subject to a variety of stresses, such as weight and variations in pressure and temperature. Hudson Engineering uses a COSMIC piping flexibility analysis computer program to analyze stresses and unsure the necessary strength and flexibility of the pipes. This program helps the company realize substantial savings in reduced engineering time.

  3. Piping Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell provide architectural and engineering services in planning, design and construction of a wide range of projects all over the world. In design analysis, company regularly uses COSMIC computer programs. In computer testing piping design of a power plant, company uses Pipe Flexibility Analysis Program (MEL-21) to analyze stresses due to weight, temperature, and pressure found in proposed piping systems. Individual flow rates are put into the computer, then computer calculates the pressure drop existing across each component; if needed, design corrections or adjustments can be made and rechecked.

  4. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1994-01-01

    It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject. This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5. Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection mo

  5. Nonlinear Vibration Induced by the Water-film Whirl and Whip in a Sliding Bearing Rotor System

    Institute of Scientific and Technical Information of China (English)

    ZHAI Liming; LUO Yongyao; WANG Zhengwei; KITAUCHI Seishiro; MIYAGAWA Kazuyoshi

    2016-01-01

    Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

  6. Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system

    Science.gov (United States)

    Zhai, Liming; Luo, Yongyao; Wang, Zhengwei; Kitauchi, Seishiro; Miyagawa, Kazuyoshi

    2016-03-01

    Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

  7. The water-repellent cerotegument of whip-spiders (Arachnida: Amblypygi).

    Science.gov (United States)

    Wolff, Jonas O; Seiter, Michael; Gorb, Stanislav N

    2017-01-01

    The cuticle of arthropods is usually composed of layers of a chitin-protein-microcomposite, a proteinaceous epicuticle and a thin lipid coating. However, in some instances a thick cement layer (cerotegument) covers the cuticle and may produce elaborate microstructures. This has previously been described for millipedes and mites. Here we report the previously unknown presence of a superhydrophobic cerotegument in whip-spiders (Ambypygi) and reveal its variation in ultrastructure and water-repellence between species. We discuss the relevance of found micro-morphological and physical characters for taxonomy and phylogenetics of this group, and the potential biological functions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Piping Connector

    Science.gov (United States)

    1994-01-01

    In Stennis Space Center's Component Test Facility, piping lines carry rocket propellants and high pressure cryogenic fuels. When the lines are chilled to a pretest temperature of 400 degrees below zero, ordinary piping connectors can leak. Under contract to Stennis, Reflange, Inc. developed the T-Con connector, which included a secondary seal that tolerates severe temperature change. Because of the limited need for the large and expensive T-Con product, Reflange also developed the less costly E-Con, a smaller more compact design with the same technical advantages as the T-Con.

  9. In vivo toxicity and pharmacokinetic features of the janus kinase 3 inhibitor WHI-P131 [4-(4'hydroxyphenyl)-amino-6,7- dimethoxyquinazoline.

    Science.gov (United States)

    Uckun, F M; Ek, O; Liu, X P; Chen, C L

    1999-10-01

    4-(4'Hydroxyphenyl)-amino-6,7-dimethoxyquinazoline (WHI-P131) is a potent and selective inhibitor of the Janus kinase 3, which triggers apoptosis in human acute lymphoblastic leukemia (ALL) cells. In this preclinical study, we evaluated the pharmacokinetics and toxicity of WHI-P131 in rats, mice, and cynomolgus monkeys. Following i.v. administration, the terminal elimination half-life of WHI-P131 was 73.2 min in rats, 103.4 min in mice, and 45.0 min in monkeys. The i.v. administered WHI-P131 showed a very wide tissue distribution in mice. Following i.p. administration, WHI-P131 was rapidly absorbed in both rats and mice, and the time to reach the maximum plasma concentration (tmax) was 24.8 min in rats and 10.0 min in mice. Subsequently, WHI-P131 was eliminated with a terminal elimination half-life of 51.8 min in rats and 123.6 min in mice. The estimated i.p. bioavailability was 95% for rats, as well as for mice. WHI-P131 was quickly absorbed after oral administration in mice with a tmax of 5.8 min, but its oral bioavailability was relatively low (29.6%). The elimination half-life of WHI-P131 after oral administration was 297.6 min. WHI-P131 was not acutely toxic to mice at single i.p. bolus doses ranging from 0.5-250 mg/kg. Two cynomolgus monkeys treated with 20 mg/kg WHI-P131 and one cynomolgus monkey treated with 100 mg/kg WHI-P131 experienced no side effects. Plasma samples from WHI-P131-treated monkeys exhibited potent antileukemic activity against human ALL cells in vitro. To our knowledge, this is the first preclinical toxicity and pharmacokinetic study of a Janus kinase 3 inhibitor. Further development of WHI-P131 may provide the basis for new and effective treatment programs for relapsed ALL in clinical settings.

  10. Changing Human-Animal Relationships in Sport: An Analysis of the UK and Australian Horse Racing Whips Debates

    Directory of Open Access Journals (Sweden)

    Raewyn Graham

    2016-05-01

    Full Text Available Changing social values and new technologies have contributed to increasing media attention and debate about the acceptable use of animals in sport. This paper focuses on the use of the whip in thoroughbred horse racing. Those who defend its use argue it is a necessary tool needed for safety, correction and encouragement, and that it does not cause the horse any pain. For those who oppose its use, it is an instrument of cruelty. Media framing is employed to unpack the discourses played out in print and social media in the UK (2011 and Australia (2009 during key periods of the whip debate following the introduction of new whip rules. Media coverage for the period August 2014–August 2015 for both countries is also considered. This paper seeks to identify the perceptions of advocates and opponents of the whip as portrayed in conventional and social media in Australia and the UK, to consider if these perceptions have changed over time, and whose voices are heard in these platforms. This paper contributes to discussions on the impacts that media sites have either in reinforcing existing perspectives or creating new perspectives; and importantly how this impacts on equine welfare.

  11. Changing Human-Animal Relationships in Sport: An Analysis of the UK and Australian Horse Racing Whips Debates.

    Science.gov (United States)

    Graham, Raewyn; McManus, Phil

    2016-05-03

    Changing social values and new technologies have contributed to increasing media attention and debate about the acceptable use of animals in sport. This paper focuses on the use of the whip in thoroughbred horse racing. Those who defend its use argue it is a necessary tool needed for safety, correction and encouragement, and that it does not cause the horse any pain. For those who oppose its use, it is an instrument of cruelty. Media framing is employed to unpack the discourses played out in print and social media in the UK (2011) and Australia (2009) during key periods of the whip debate following the introduction of new whip rules. Media coverage for the period August 2014-August 2015 for both countries is also considered. This paper seeks to identify the perceptions of advocates and opponents of the whip as portrayed in conventional and social media in Australia and the UK, to consider if these perceptions have changed over time, and whose voices are heard in these platforms. This paper contributes to discussions on the impacts that media sites have either in reinforcing existing perspectives or creating new perspectives; and importantly how this impacts on equine welfare.

  12. A FOSSIL WHIP-SCORPION (ARACHNIDA: THELYPHONIDA FROM THE UPPER CARBONIFEROUS OF THE CARNIC ALPS (FRIULI, NE ITALY

    Directory of Open Access Journals (Sweden)

    PAUL A. SELDEN

    2016-03-01

    Full Text Available A new and well-preserved fossil whip scorpion (Arachnida: Uropygi: Thelyphonida is described from the Late Carboniferous of the Carnic Alps, Friuli, Italy. It is referred to Parageralinura marsiglioi n. sp. The new specimen is the first Carboniferous arachnid to be described from mainland Italy and is possibly the youngest Palaeozoic thelyphonid.

  13. Whipping Procrastination

    Science.gov (United States)

    2016-03-01

    spend an hour on social media , but only after you finish that quarterly report for the boss. Use rewards— large and small—as incentives to get...the next day’s list. Finishing items so I don’t have to rewrite them is a motivator for me, too. Defense AT&L: March-April 2016 54 Make a promise: If...I promise to do something for someone, I go ahead and schedule a later meeting with that person to discuss the results. It’s amazing how motivating

  14. Implanting intra-abdominal radiotransmitters with external whip antennas in ducks

    Science.gov (United States)

    Korschgen, C.E.; Kenow, K.P.; Gendron-Fitzpatrick, A.; Green, W.L.; Dein, F.J.

    1996-01-01

    We developed and evaluated a surgical procedure for implanting intra-abdominal radiotransmitters with external whip antennas in captive mallards (Anas platyrhynchos). Transmitters were implanted in the abdominal cavity and the antennas exited through the caudal abdominal wall and skin. Birds with implanted transmitters developed mild to moderate localized air sac reactions. These reactions involved adhesions of the right anterior abdominal air sac to the liver with contractions around the transmitters and antenna catheters. The adhesions were reinforced by a proliferation of connective tissue and lined by multinucleated giant cells (foreign body reaction). Casual observation indicated that neither behavior nor activity of the birds was altered by the histological reaction to the transmitter implant. No increase in systemic lesions (particularly liver or kidney) could be correlated with the histological reactions. Our evaluations indicate that the procedure is a reliable method for radiomarking ducks and the technique has been successfully used in 2 field studies.

  15. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1982-01-01

    A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established

  16. Fundamentals of piping design

    CERN Document Server

    Smith, Peter

    2013-01-01

    Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

  17. Belt whippings in Brazilian Jiu Jitsu: a case study exploring conditional consent and the value of options

    Directory of Open Access Journals (Sweden)

    Rob Lawlor

    2015-11-01

    Full Text Available In this paper, considering the practice of whipping students with belts, when grading, I argue that the most obvious objections, considering the harm involved or questioning the validity of the consent, are inconclusive. However, I argue that, even if we assume the consent is valid, the practice can still be shown to be problematic. This argument relies on the idea of conditional consent.

  18. A Perspective on the Numerical and Experimental Characteristics of Multi-Mode Dry-Friction Whip and Whirl

    Science.gov (United States)

    2008-06-01

    whip or whirl. The next efforts on the subject were those of Baker [8] and Den Hartog [9], who established the principles of reverse whirl from an...intuitive perspective. Using a simple geometrical model of the rotor-stator contact plane, Baker and Den Hartog derived the kinematic constraint...Using a model similar to the one given in Figure 1, Baker [8] and Den Hartog [9] proposed the following. ω S O ( ) STATOR FIXED ROTOR Ω N FF RO P X

  19. Comparing performance and kinematics of throwing with a circular and whip-like wind up by experienced handball players.

    Science.gov (United States)

    van den Tillaar, R; Zondag, A; Cabri, J

    2013-12-01

    The aim of this study was to compare the performance (throwing velocity of the ball) and kinematics of overarm throwing with the circular and whip-like wind up in elite handball players. Twenty-two elite handball players (11 men and 11 women) conducted both types of throws. The ball release velocity, maximal ball acceleration, maximal velocity of the end points of the five segments and maximal angles, angles at ball release and maximal angular velocities of the 11 joint movements and their timing during the throw were analyzed. Significantly higher ball release velocities (21.9 m/s vs 20.6 m/s) were reached together with higher maximal linear velocities of the end points of all segments and longer throwing time with the circular wind up than with the whip-like wind up. Furthermore, it seems that the timing and amount of maximal angular pelvis rotation was the main contributor to the difference in the maximal ball release velocity between the two wind ups. The findings support the observation that overarm throwing with the circular wind up results in higher ball releases but also a longer throwing movement in comparison to whip-like wind up throws.

  20. Phylogeographic Study of Whip Scorpions (Chelicerata: Arachnida: Thelyphonida) in Japan and Taiwan.

    Science.gov (United States)

    Karasawa, Shigenori; Nagata, Satomi; Aoki, Jun-ichi; Yahata, Kensuke; Honda, Masanao

    2015-08-01

    Whip scorpions (Thelyphonida), comprising an order in the class Arachnida, are distributed from tropical to temperate zones. Two species occur exclusively in Japan and Taiwan, but the border of their distributional ranges is ambiguous in the Central Ryukyus (Japan). We collected new specimens from the Central Ryukyus and revealed that the border of distribution of the two species lies between the Central and Southern Ryukyus, i.e., the Kerama Gap. Moreover, the estimated divergence time (15.8 Mya) of the two species, based on the mitochondrial COI gene, was older than the recently estimated time (1.55 Mya) of formation of the Kerama Gap. These results highlight the risks of a priori assumption solely on the basis of geological data for applying it as a calibration point to some terrestrial animals in this region. Typopeltis stimpsonii was genetically divided into four lineages, two of which turned out to be endemic to the Okinawa Islands. All specimens from the main island of Japan and Shikoku were in one lineage, which was also found in the Amami Islands and Hachijojima Island. This suggests that these specimens may have been dispersed by human activity. Typopeltis crucifer included five genetic lineages. Species collected from Ishigakijima and Iriomotejima Islands were genetically diversified not between the borders of these islands but within Ishigakijima Island. This study also suggests that phylogenetic diversity of the species in the Southern Ryukyus have increased through two times of invasions from Taiwan.

  1. Growth, longevity and age at maturity in the European whip snakes, Hierophis viridiflavus and H. carbonarius

    Directory of Open Access Journals (Sweden)

    Sara Fornasiero

    2016-12-01

    Full Text Available Age and size at maturity are major life history traits, because they influence lifetime fecundity. They represent the outcome from complex interactions among environmental pressures (abiotic and biotic and individual characteristics. They are also difficult to measure in natural populations and thus they are rarely appraised, especially in reptiles due to the elusive nature of juveniles. Using skeletochronology to circumvent these difficulties, this study aims to compare age structures, longevity, age-size relationships, growth curves, age and size at maturation and potential reproductive lifespan in three populations of the European whip snake (two Hierophis viridiflavus, one H. carbonarius. We measured the body size and counted the skeletal growth marks on 132 specimens, accidentally killed or from museum collections (72 from NW France [Chizé]; 28 from Tuscan Archipelago [Montecristo], Italy; 32 from S Italy [Calimera]. General patterns of age at maturity and longevity were consistent with previous studies based on recapture investigations. Strong differences among populations suggest local adaptation to contrasted environmental conditions. These results suggest that skeletochronology is a useful technique that can be applied opportunistically in snakes (e.g. using road-kills in order to collect otherwise unavailable data that are essential to address fundamental questions regarding longevity, life-history traits and to perform population viability analyses.

  2. Effects of emulsifying components in the continuous phase of cream on the stability of fat globules and the physical properties of whipped cream.

    Science.gov (United States)

    Ihara, K; Hirota, M; Akitsu, T; Urakawa, K; Abe, T; Sumi, M; Okawa, T; Fujii, T

    2015-05-01

    The emulsifying components in cream are very important in controlling the physical characteristics of whipped cream. The effects of those components on the stability of fat globules and the physical characteristics of whipped cream were investigated. A low-molecular-weight emulsifier, and protein ingredients such as sodium caseinate and a casein partial hydrolysate (casein peptides), were used as emulsifying components in this investigation. The viscosity of deaerated whipped cream (called the serum viscosity) was measured to evaluate the degree of fat-globule aggregation. Furthermore, the shape-retention ability, which is the degree of reduction in the firmness of whipped cream between immediately after whipping and after 1d of refrigeration, was explored. The addition of the low-molecular-weight emulsifier in the continuous phase of dairy cream, which does not contain added low-molecular-weight emulsifiers, increased the stability of the fat globules and reduced the shape-retention ability of the whipped cream. The addition of protein ingredients (sodium caseinate and casein peptides) to the continuous phase of dairy cream had little effect. However, the addition of casein peptide in the continuous phase of dairy cream together with the low-molecular-weight emulsifier reduced the effect of the low-molecular-weight emulsifier on the stabilization of fat globules and the shape-retention ability of the whipped cream. The addition of casein peptide did not recover the serum viscosity; thus, other mechanisms might underlie this phenomenon. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  3. Reusable pipe flange covers

    Energy Technology Data Exchange (ETDEWEB)

    Holden, James Elliott (Simpsonville, SC); Perez, Julieta (Houston, TX)

    2001-01-01

    A molded, flexible pipe flange cover for temporarily covering a pipe flange and a pipe opening includes a substantially round center portion having a peripheral skirt portion depending from the center portion, the center portion adapted to engage a front side of the pipe flange and to seal the pipe opening. The peripheral skirt portion is formed to include a plurality of circumferentially spaced tabs, wherein free ends of the flexible tabs are formed with respective through passages adapted to receive a drawstring for pulling the tabs together on a back side of the pipe flange.

  4. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  5. BEAM PIPE IS INSTALLED

    CERN Multimedia

    The installation of the central section of the beam pipe into the heart of the  CMS was completed by 23 April. All the beam pipe elements have been successfully vacuum-tested and the bakeout started.  

  6. Impedance modelling of pipes

    Science.gov (United States)

    Creasy, M. Austin

    2016-03-01

    Impedance models of pipes can be used to estimate resonant frequencies of standing waves and model acoustic pressure of closed and open ended pipes. Modelling a pipe with impedance methods allows additional variations to the pipe to be included in the overall model as a system. Therefore an actuator can be attached and used to drive the system and the impedance model is able to include the dynamics of the actuator. Exciting the pipe system with a chirp signal allows resonant frequencies to be measured in both the time and frequency domain. The measurements in the time domain are beneficial for introducing undergraduates to resonances without needing an understanding of fast Fourier transforms. This paper also discusses resonant frequencies in open ended pipes and how numerous texts incorrectly approximate the resonant frequencies for this specific pipe system.

  7. Heat Pipe Materials Compatibility

    Science.gov (United States)

    Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

    1976-01-01

    An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes.

  8. Introduction to Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

  9. Heat Pipe Planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2014-01-01

    When volcanism dominates heat transport, a terrestrial body enters a heat-pipe mode, in which hot magma moves through the lithosphere in narrow channels. Even at high heat flow, a heat-pipe planet develops a thick, cold, downwards-advecting lithosphere dominated by (ultra-)mafic flows and contractional deformation at the surface. Heat-pipes are an important feature of terrestrial planets at high heat flow, as illustrated by Io. Evidence for their operation early in Earth's history suggests that all terrestrial bodies should experience an episode of heat-pipe cooling early in their histories.

  10. Explosive welding of pipes

    Energy Technology Data Exchange (ETDEWEB)

    Drennov, O.; Burtseva, O.; Kitin, A. [Russian Federal Nuclear Center, Sarov (Russian Federation)

    2006-08-15

    Arrangement of pipelines for the transportation of oil and gas is a complicated problem. In this paper it is suggested to use the explosive welding method to weld pipes together. This method is rather new. This method can be advantageous (saving material and physical resources) comparing to its static analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. We suggest to perform explosive welding according to the following scheme: the ends of the 2 pipes are connected, the external surfaces are kept at a similar level. A cylindrical steel layer of diameter larger than the pipe diameter is set around the pipe joint and an explosive charge is placed on its external surface. The basic problem is the elimination of strains and reduction of pipe diameter in the area of the dynamic effect. The suggestion is to use water as filler: the volume of pipes in the area adjacent to the zone of explosive welding is totally filled with water. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gas dynamic and elastic-plastic calculations we determined non-deformed mass of water. Model experiments with pipes having radii R = 57 mm confirmed results of the calculations and the possibility in principle to weld pipes by explosion with use of water as filler.

  11. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...

  12. A heat pipe

    Energy Technology Data Exchange (ETDEWEB)

    Rachev, L.A.; Kravtsov, A.A.

    1979-02-08

    A thermal pipe is described which contains a hermetically sealed body with a reticular filler. In order to increase the transmitted thermal power, the pipe is equipped with a high voltage source and with insulators, located between the wall of the body and the filler, where the latter is switched in to the high voltage source, preferably an adjustable one.

  13. Oscillating heat pipes

    CERN Document Server

    Ma, Hongbin

    2015-01-01

    This book presents the fundamental fluid flow and heat transfer principles occurring in oscillating heat pipes and also provides updated developments and recent innovations in research and applications of heat pipes. Starting with fundamental presentation of heat pipes, the focus is on oscillating motions and its heat transfer enhancement in a two-phase heat transfer system. The book covers thermodynamic analysis, interfacial phenomenon, thin film evaporation,  theoretical models of oscillating motion and heat transfer of single phase and two-phase flows, primary  factors affecting oscillating motions and heat transfer,  neutron imaging study of oscillating motions in an oscillating heat pipes, and nanofluid’s effect on the heat transfer performance in oscillating heat pipes.  The importance of thermally-excited oscillating motion combined with phase change heat transfer to a wide variety of applications is emphasized. This book is an essential resource and learning tool for senior undergraduate, gradua...

  14. The monster sound pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-03-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which illustrates how an Internet keyboard can be used to estimate the fundamental pitches of each pipe. Since both pipes have similar end corrections, the pitch discrepancy between the smooth pipe and drainage tube is due to the corrugations, which lower the speed of sound inside the flexible tube, dropping its pitch a semitone.

  15. Reeling of tight fit pipe

    NARCIS (Netherlands)

    Focke, E.S.

    2007-01-01

    If it would be possible to install Tight Fit Pipe by means of reeling, it would be an attractive new option for the exploitation of offshore oil and gas fields containing corrosive hydrocarbons. Tight Fit Pipe is a mechanically bonded double walled pipe where a corrosion resistant alloy liner pipe

  16. Experimenting with a "Pipe" Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-01-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here…

  17. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A

    2011-01-01

    Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

  18. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...... algorithm using successive linear programming is presented. The performance of the algorithm is illustrated by optimizing a network with 201 pipes and 172 nodes. It is concluded that the new algorithm seems to be very efficient and stable, and that it always finds a solution with a cost near the best...

  19. An electrohydrodynamic heat pipe.

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    A heat pipe of new design, using an electrode structure to orient and guide the dielectric liquid phase flow, is proposed. Analysis indicates that the operation of the electrohydrodynamic heat pipe is in direct analogy to capillary devices, with the polarization force acting in place of capillarity. Advantages of these new heat pipes include greatly reduced liquid friction, electrohydrodynamically enhanced evaporation and condensation heat transfer, and a possible voltage-controlled on/off feature. Preliminary calculations indicate that relatively high performance devices are possible.

  20. Electrohydrodynamic heat pipes.

    Science.gov (United States)

    Jones, T. B.

    1973-01-01

    An electrohydrodynamic heat pipe of radical design is proposed which substitutes polarization electrohydrodynamic force effects for capillarity in collecting, guiding, and pumping a condensate liquid phase. The discussed device is restricted to the use of dielectric liquids as working fluids. Because of the relatively poor thermal transport properties of these liquids, capillary heat pipes using these liquids have not been high performance devices. The employment of the electrohydrodynamic concept should enhance this performance and help fill the performance gap that exists in the temperature range from 250 F to 750 F for 'conventional' capillary heat pipes.

  1. An electrohydrodynamic heat pipe

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    Dielectric liquid for transfer of heat provides liquid flow from the condenser section to the evaporator section in conventional heat pipes. Working fluid is guided or pumped by an array of wire electrodes connected to a high-voltage source.

  2. Silicon Heat Pipe Array

    Science.gov (United States)

    Yee, Karl Y.; Ganapathi, Gani B.; Sunada, Eric T.; Bae, Youngsam; Miller, Jennifer R.; Beinsford, Daniel F.

    2013-01-01

    Improved methods of heat dissipation are required for modern, high-power density electronic systems. As increased functionality is progressively compacted into decreasing volumes, this need will be exacerbated. High-performance chip power is predicted to increase monotonically and rapidly with time. Systems utilizing these chips are currently reliant upon decades of old cooling technology. Heat pipes offer a solution to this problem. Heat pipes are passive, self-contained, two-phase heat dissipation devices. Heat conducted into the device through a wick structure converts the working fluid into a vapor, which then releases the heat via condensation after being transported away from the heat source. Heat pipes have high thermal conductivities, are inexpensive, and have been utilized in previous space missions. However, the cylindrical geometry of commercial heat pipes is a poor fit to the planar geometries of microelectronic assemblies, the copper that commercial heat pipes are typically constructed of is a poor CTE (coefficient of thermal expansion) match to the semiconductor die utilized in these assemblies, and the functionality and reliability of heat pipes in general is strongly dependent on the orientation of the assembly with respect to the gravity vector. What is needed is a planar, semiconductor-based heat pipe array that can be used for cooling of generic MCM (multichip module) assemblies that can also function in all orientations. Such a structure would not only have applications in the cooling of space electronics, but would have commercial applications as well (e.g. cooling of microprocessors and high-power laser diodes). This technology is an improvement over existing heat pipe designs due to the finer porosity of the wick, which enhances capillary pumping pressure, resulting in greater effective thermal conductivity and performance in any orientation with respect to the gravity vector. In addition, it is constructed of silicon, and thus is better

  3. Stuck pipe prediction

    KAUST Repository

    Alzahrani, Majed

    2016-03-10

    Disclosed are various embodiments for a prediction application to predict a stuck pipe. A linear regression model is generated from hook load readings at corresponding bit depths. A current hook load reading at a current bit depth is compared with a normal hook load reading from the linear regression model. A current hook load greater than a normal hook load for a given bit depth indicates the likelihood of a stuck pipe.

  4. The Monster Sound Pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-01-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which…

  5. Heat pipe dynamic behavior

    Science.gov (United States)

    Issacci, F.; Roche, G. L.; Klein, D. B.; Catton, I.

    1988-01-01

    The vapor flow in a heat pipe was mathematically modeled and the equations governing the transient behavior of the core were solved numerically. The modeled vapor flow is transient, axisymmetric (or two-dimensional) compressible viscous flow in a closed chamber. The two methods of solution are described. The more promising method failed (a mixed Galerkin finite difference method) whereas a more common finite difference method was successful. Preliminary results are presented showing that multi-dimensional flows need to be treated. A model of the liquid phase of a high temperature heat pipe was developed. The model is intended to be coupled to a vapor phase model for the complete solution of the heat pipe problem. The mathematical equations are formulated consistent with physical processes while allowing a computationally efficient solution. The model simulates time dependent characteristics of concern to the liquid phase including input phase change, output heat fluxes, liquid temperatures, container temperatures, liquid velocities, and liquid pressure. Preliminary results were obtained for two heat pipe startup cases. The heat pipe studied used lithium as the working fluid and an annular wick configuration. Recommendations for implementation based on the results obtained are presented. Experimental studies were initiated using a rectangular heat pipe. Both twin beam laser holography and laser Doppler anemometry were investigated. Preliminary experiments were completed and results are reported.

  6. Heat Pipe Integrated Microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

    1999-03-30

    The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached

  7. Effects of basil seed gum, Cress seed gum and Quince seed gum on the physical, textural and rheological properties of whipped cream.

    Science.gov (United States)

    Farahmandfar, Reza; Asnaashari, Maryam; Salahi, Mohammad Reza; Khosravi Rad, Tandis

    2017-05-01

    This study focuses on the physical, textural and rheological properties of low fat (LF) whipped cream with 30% fat content developed with Basil seed gum (BSG), Cress seed gum (CSG) and Quince seed gum (QSG) at the concentration of 0.1 and 0.3% (w/w) and comparison with high fat (HF) whipped cream sample (55%) as control. Flow curves were analyzed using Herschel bulkey and Carreau models through a fitting procedure. The rheological investigations confirmed that all samples were shear thinning fluid exhibiting a yield stress and thixotropy properties. The frequency sweep test showed that at the same gum concentration, mixes containing BSG have higher G', G″ and η(*) than those of mixes with QSG and CSG, and all mixes containing gum displayed weak gel-like behavior. Analysis showed that adding and increasing gums concentration caused to increased viscosity, hardness and overrun, leading to a better quality in the final products. Moreover, textural properties showed that the effect of BSG on hardness and adhesiveness was significantly greater than QSG and CSG at the same concentration. Based on obtained result, 0.3% concentration of added BSG had a much greater effects on the whipped cream properties than those of mixes with QSG and CSG.

  8. Heat pipes and use of heat pipes in furnace exhaust

    Science.gov (United States)

    Polcyn, Adam D.

    2010-12-28

    An array of a plurality of heat pipe are mounted in spaced relationship to one another with the hot end of the heat pipes in a heated environment, e.g. the exhaust flue of a furnace, and the cold end outside the furnace. Heat conversion equipment is connected to the cold end of the heat pipes.

  9. Two new cave-dwelling genera of short-tailed whip-scorpions from Brazil (Arachnida: Schizomida: Hubbardiidae

    Directory of Open Access Journals (Sweden)

    Ricardo Pinto-da-Rocha

    2016-01-01

    Full Text Available ABSTRACT Two new genera of short-tailed whip-scorpions are described based on material from Brazilian iron ore and canga caves in the Carajás region, Pará, Brazil. Naderiore gen. nov. with a single species N. carajas sp. nov. and also monotypic Cangazomus gen. nov. (type species C. xikrin sp. nov.. The relationships of the two new genera with previously described genera are discussed. Naderiore most closely resembles Adisomus Cokendolpher & Reddell, 2000, Piaroa Villarreal, Tourinho & Giupponi, 2008 and Calima Moreno-González & Villarreal, 2012, and can be distinguished from them by Dm3 modified as macrosetae in the male flagellum. Cangazomus most closely resembles Naderiore , Adisomus Cokendolpher & Reddell, 2000, and Piaroa Villarreal, Tourinho & Giupponi, 2008. It differs from all of them by the presence of two pairs of ramified spermathecal lobes, each composed of a differentiated stalk and distoterminal ramified bulbs, chitinized arch without anterior branch and notched lateral tip, pedipalps unarmed and not sexually dimorphic, and the male flagellar setae Dm3 as a microsetae.

  10. Refining Climate Change Projections for Organisms with Low Dispersal Abilities: A Case Study of the Caspian Whip Snake

    Science.gov (United States)

    Sahlean, Tiberiu C.; Gherghel, Iulian; Papeş, Monica; Strugariu, Alexandru; Zamfirescu, Ştefan R.

    2014-01-01

    Climate warming is one of the most important threats to biodiversity. Ectothermic organisms such as amphibians and reptiles are especially vulnerable as climatic conditions affect them directly. Ecological niche models (ENMs) are increasingly popular in ecological studies, but several drawbacks exist, including the limited ability to account for the dispersal potential of the species. In this study, we use ENMs to explore the impact of global climate change on the Caspian whip snake (Dolichophis caspius) as model for organisms with low dispersal abilities and to quantify dispersal to novel areas using GIS techniques. Models generated using Maxent 3.3.3 k and GARP for current distribution were projected on future climatic scenarios. A cost-distance analysis was run in ArcGIS 10 using geomorphological features, ecological conditions, and human footprint as “costs” to dispersal of the species to obtain a Maximum Dispersal Range (MDR) estimate. All models developed were statistically significant (PMaxent predicted a doubling of suitable climatic area, while GARP predicted a more conservative expansion. Both models agreed on an expansion of suitable area northwards, with minor decreases at the southern distribution limit. The MDR area calculated using the Maxent model represented a third of the total area of the projected model. The MDR based on GARP models recovered only about 20% of the total area of the projected model. Thus, incorporating measures of species’ dispersal abilities greatly reduced estimated area of potential future distributions. PMID:24670422

  11. Composite drill pipe

    Science.gov (United States)

    Leslie, James C [Fountain Valley, CA; Leslie, II, James C.; Heard, James [Huntington Beach, CA; Truong, Liem , Josephson; Marvin, Neubert [Huntington Beach, CA; Hans, [Anaheim, CA

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  12. Heat-pipe Earth.

    Science.gov (United States)

    Moore, William B; Webb, A Alexander G

    2013-09-26

    The heat transport and lithospheric dynamics of early Earth are currently explained by plate tectonic and vertical tectonic models, but these do not offer a global synthesis consistent with the geologic record. Here we use numerical simulations and comparison with the geologic record to explore a heat-pipe model in which volcanism dominates surface heat transport. These simulations indicate that a cold and thick lithosphere developed as a result of frequent volcanic eruptions that advected surface materials downwards. Declining heat sources over time led to an abrupt transition to plate tectonics. Consistent with model predictions, the geologic record shows rapid volcanic resurfacing, contractional deformation, a low geothermal gradient across the bulk of the lithosphere and a rapid decrease in heat-pipe volcanism after initiation of plate tectonics. The heat-pipe Earth model therefore offers a coherent geodynamic framework in which to explore the evolution of our planet before the onset of plate tectonics.

  13. Pipe Drafting with CAD. Teacher Edition.

    Science.gov (United States)

    Smithson, Buddy

    This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

  14. PE 100 pipe systems

    CERN Document Server

    Brömstrup, Heiner

    2012-01-01

    English translation of the 3rd edition ""Rohrsysteme aus PE 100"". Because of the considerably increased performance, pipe and pipe systems made from 100 enlarge the range of applications in the sectors of gas and water supply, sewage disposal, industrial pipeline construction and in the reconstruction and redevelopment of defective pipelines (relining). This book applies in particular to engineers, technicians and foremen working in the fields of supply, disposal and industry. Subject matters of the book are all practice-relevant questions regarding the construction, operation and maintenance

  15. 46 CFR 154.503 - Piping and piping system components: Protection from movement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping and piping system components: Protection from..., Construction and Equipment Cargo and Process Piping Systems § 154.503 Piping and piping system components... cause stresses that exceed the design stresses, the piping and piping system components and cargo...

  16. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  17. Aeronautical tubes and pipes

    Science.gov (United States)

    Beauclair, N.

    1984-12-01

    The main and subcomponent French suppliers of aircraft tubes and pipes are discussed, and the state of the industry is analyzed. Quality control is essential for tubes with regard to their i.d. and metallurgical compositions. French regulations do not allow welded seam tubes in hydraulic circuits unless no other form is available, and then rustproofed steel must be installed. The actual low level of orders for any run of tubes dictates that the product is only one of several among the manufacturers' line. Automation, both in NDT and quality control, assures that the tubes meet specifications. A total of 10 French companies participate in the industry, serving both civil and military needs, with some companies specializing only in titanium, steel, or aluminum materials. Concerns wishing to enter the market must upgrade their equipment to meet the higher aeronautical specifications and be prepared to furnish tubes and pipes that serve both functional and structural purposes simultaneously. Additionally, pipe-bending machines must also perform to tight specifications. Pipes can range from 0.2 mm exterior diameter to 40 mm, with wall thicknesses from 0.02 mm to 3 mm. A chart containing a list of manufacturers and their respective specifications and characteristics is presented, and a downtrend in production with reduction of personnel is noted.

  18. Heat-pipe planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2017-09-01

    Observations of the surfaces of all terrestrial bodies other than Earth reveal remarkable but unexplained similarities: endogenic resurfacing is dominated by plains-forming volcanism with few identifiable centers, magma compositions are highly magnesian (mafic to ultra-mafic), tectonic structures are dominantly contractional, and ancient topographic and gravity anomalies are preserved to the present. Here we show that cooling via volcanic heat pipes may explain these observations and provide a universal model of the way terrestrial bodies transition from a magma-ocean state into subsequent single-plate, stagnant-lid convection or plate tectonic phases. In the heat-pipe cooling mode, magma moves from a high melt-fraction asthenosphere through the lithosphere to erupt and cool at the surface via narrow channels. Despite high surface heat flow, the rapid volcanic resurfacing produces a thick, cold, and strong lithosphere which undergoes contractional strain forced by downward advection of the surface toward smaller radii. We hypothesize that heat-pipe cooling is the last significant endogenic resurfacing process experienced by most terrestrial bodies in the solar system, because subsequent stagnant-lid convection produces only weak tectonic deformation. Terrestrial exoplanets appreciably larger than Earth may remain in heat-pipe mode for much of the lifespan of a Sun-like star.

  19. [Piping cinnamon] 791

    OpenAIRE

    W L H Skeen and Co

    2003-01-01

    279 x 211 mm. Showing female workers making cinnamon pipes. The cinnamon is placed on a low tripod formed from four sticks, and steadied with the operator's foot while the cuticle is scraped off with a small curved knife. Annotated '791' on the bottom right hand corner of the photograph. Date approximate.

  20. Catecholamines, cardiac natriuretic peptides and chromogranin A: evolution and physiopathology of a 'whip-brake' system of the endocrine heart.

    Science.gov (United States)

    Tota, Bruno; Cerra, Maria Carmela; Gattuso, Alfonsina

    2010-09-15

    In the past 50 years, extensive evidence has shown the ability of vertebrate cardiac non-neuronal cells to synthesize and release catecholamines (CA). This formed the mindset behind the search for the intrinsic endocrine heart properties, culminating in 1981 with the discovery of the natriuretic peptides (NP). CA and NP, co-existing in the endocrine secretion granules and acting as major cardiovascular regulators in health and disease, have become of great biomedical relevance for their potent diagnostic and therapeutic use. The concept of the endocrine heart was later enriched by the identification of a growing number of cardiac hormonal substances involved in organ modulation under normal and stress-induced conditions. Recently, chromogranin A (CgA), a major constituent of the secretory granules, and its derived cardio-suppressive and antiadrenergic peptides, vasostatin-1 and catestatin, were shown as new players in this framework, functioning as cardiac counter-regulators in 'zero steady-state error' homeostasis, particularly under intense excitatory stimuli, e.g. CA-induced myocardial stress. Here, we present evidence for the hypothesis that is gaining support, particularly among human cardiologists. The actions of CA, NP and CgA, we argue, may be viewed as a hallmark of the cardiac capacity to organize 'whip-brake' connection-integration processes in spatio-temporal networks. The involvement of the nitric oxide synthase (NOS)/nitric oxide (NO) system in this configuration is discussed. The use of fish and amphibian paradigms will illustrate the ways that incipient endocrine-humoral agents have evolved as components of cardiac molecular loops and important intermediates during evolutionary transitions, or in a distinct phylogenetic lineage, or under stress challenges. This may help to grasp the old evolutionary roots of these intracardiac endocrine/paracrine networks and how they have evolved from relatively less complicated designs. The latter can also be used

  1. Application of Modified Soybean Protein in the Whipped Cream%改性大豆蛋白在植脂奶油中的应用

    Institute of Scientific and Technical Information of China (English)

    周雪松; 王才华

    2012-01-01

    研究了改性大豆蛋白的乳化性、乳化稳定性、起泡性,以及其替代进口酪朊酸钠应用于植脂奶油对其搅打时间、起泡率、保形性、变粗程度、入口即化感、光泽度、细腻度、油腻感的影响,研究表明,改性大豆蛋白的乳化性、乳化稳定性、起泡性介于进口酪朊蛋白和国产酪朊蛋白间,优于国产大豆分离蛋白;改性大豆蛋白替代进口酪朊酸钠50%应用于植脂奶油产品品质良好.%The emulsification property, emulsifying stability and foaming property of modified soybean protein (MSP) were studied. The effects of MSP substituting for imported sodium caseinate application in the whipped cream on the whipping time, foaming rate, shape retention, roughening degree, just melting feeling in the mouth, glossiness, smooth degree and greasy feeling were also studied. Results showed that the emulsification property, emulsifying stability, foaming property of MSP were between imported sodium caseinate and homebred sodium caseinate, but superior to the homebred soybean protein isolate. The whipped cream containing MSP to 50%substitute for imported sodium caseinate had good quality.

  2. LHCb: Beam Pipe portrait

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector: it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  3. LHCb: Beam Pipe

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector:it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  4. Heat Pipe Systems

    Science.gov (United States)

    1988-01-01

    Solar Fundamentals, Inc.'s hot water system employs space-derived heat pipe technology. It is used by a meat packing plant to heat water for cleaning processing machinery. Unit is complete system with water heater, hot water storage, electrical controls and auxiliary components. Other than fans and a circulating pump, there are no moving parts. System's unique design eliminates problems of balancing, leaking, corroding, and freezing.

  5. Pipe inspection using the pipe crawler. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  6. 46 CFR 76.33-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.33-15 Section 76.33-15 Shipping COAST GUARD... System, Details § 76.33-15 Piping. (a) Individual pipes shall be not less than 3/4-inch standard pipe size. (b) All piping, valves, and fittings of ferrous materials shall be protected inside and...

  7. Experimenting with a ``Pipe'' Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-04-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here allows students in a physics of music or introductory physics course to study an example of an "edge tone" device that produces discrete sound frequencies. From their textbooks, students likely know about standing waves produced by pipes or strings, as well as the resonant frequencies for open and closed pipes. To go a bit further, they can also learn how the frequency of the sound wave depends on the orifice-to-edge distance of the wind instrument.

  8. Multileg Heat-Pipe Evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-01-01

    Parallel pipes provide high heat flow from small heat exchanger. Six parallel heat pipes extract heat from overlying heat exchanger, forming evaporator. Vapor channel in pipe contains wick that extends into screen tube in liquid channel. Rods in each channel hold wick and screen tube in place. Evaporator compact rather than extended and more compatible with existing heat-exchanger geometries. Prototype six-pipe evaporator only 0.3 m wide and 0.71 m long. With ammonia as working fluid, transports heat to finned condenser at rate of 1,200 W.

  9. Dynamic modeling of a hose-drogue aerial refueling system and integral sliding mode backstepping control for the hose whipping phenomenon

    Directory of Open Access Journals (Sweden)

    Wang Haitao

    2014-08-01

    Full Text Available Dynamic modeling of a hose-drogue aerial refueling system (HDARS and an integral sliding mode backstepping controller design for the hose whipping phenomenon (HWP during probe-drogue coupling are studied. Firstly, a dynamic model of the variable-length hose-drogue assembly is built for the sake of exploiting suppression methods for the whipping phenomenon. Based on the lumped parameter method, the hose is modeled by a series of variable-length links connected with frictionless joints. A set of iterative equations of the hose’s three-dimensional motion is derived subject to hose reeling in/out, tanker motion, gravity, and aerodynamic loads accounting for the effects of steady wind, atmospheric turbulence, and tanker wake. Secondly, relying on a permanent magnet synchronous motor and high-precision position sensors, a new active control strategy for the HWP on the basis of the relative position between the tanker and the receiver is proposed. Considering the strict-feedback configuration of the permanent magnet synchronous motor, a rotor position control law based on the backstepping method is designed to insure global stability. An integral of the rotor position error and an exponential sliding mode reaching law of the current errors are applied to enhance control accuracy and robustness. Finally, the simulation results show the effectiveness of the proposed model and control laws.

  10. Dynamic modeling of a hose-drogue aerial refueling system and integral sliding mode backstepping control for the hose whipping phenomenon

    Institute of Scientific and Technical Information of China (English)

    Wang Haitao; Dong Xinmin; Xue Jianping; Liu Jiaolong

    2014-01-01

    Dynamic modeling of a hose-drogue aerial refueling system (HDARS) and an integral sliding mode backstepping controller design for the hose whipping phenomenon (HWP) during probe-drogue coupling are studied. Firstly, a dynamic model of the variable-length hose-drogue assembly is built for the sake of exploiting suppression methods for the whipping phenomenon. Based on the lumped parameter method, the hose is modeled by a series of variable-length links connected with frictionless joints. A set of iterative equations of the hose’s three-dimensional motion is derived subject to hose reeling in/out, tanker motion, gravity, and aerodynamic loads accounting for the effects of steady wind, atmospheric turbulence, and tanker wake. Secondly, relying on a permanent magnet synchronous motor and high-precision position sensors, a new active control strategy for the HWP on the basis of the relative position between the tanker and the receiver is proposed. Considering the strict-feedback configuration of the permanent magnet synchronous motor, a rotor position control law based on the backstepping method is designed to insure global stability. An integral of the rotor position error and an exponential sliding mode reaching law of the current errors are applied to enhance control accuracy and robustness. Finally, the simulation results show the effectiveness of the proposed model and control laws.

  11. Large-bore pipe decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.

    1998-01-01

    The decontamination and decommissioning (D and D) of 1200 buildings within the US Department of Energy-Office of Environmental Management (DOE-EM) Complex will require the disposition of miles of pipe. The disposition of large-bore pipe, in particular, presents difficulties in the area of decontamination and characterization. The pipe is potentially contaminated internally as well as externally. This situation requires a system capable of decontaminating and characterizing both the inside and outside of the pipe. Current decontamination and characterization systems are not designed for application to this geometry, making the direct disposal of piping systems necessary in many cases. The pipe often creates voids in the disposal cell, which requires the pipe to be cut in half or filled with a grout material. These methods are labor intensive and costly to perform on large volumes of pipe. Direct disposal does not take advantage of recycling, which could provide monetary dividends. To facilitate the decontamination and characterization of large-bore piping and thereby reduce the volume of piping required for disposal, a detailed analysis will be conducted to document the pipe remediation problem set; determine potential technologies to solve this remediation problem set; design and laboratory test potential decontamination and characterization technologies; fabricate a prototype system; provide a cost-benefit analysis of the proposed system; and transfer the technology to industry. This report summarizes the activities performed during fiscal year 1997 and describes the planned activities for fiscal year 1998. Accomplishments for FY97 include the development of the applicable and relevant and appropriate regulations, the screening of decontamination and characterization technologies, and the selection and initial design of the decontamination system.

  12. Deployable Pipe-Z

    Science.gov (United States)

    Zawidzki, Machi

    2016-10-01

    This paper presents a concept of deployable Pipe-Z (dPZ): a modular structural system which takes advantage of the robustness of rigid-panel mechanism and allows to create free-form links which are also reconfigurable and deployable. The concept presented can be applied for building habitats and infrastructures for human exploration of oceans and outer space. dPZ structures can adapt to changing requirements e.g. mission objectives, crew condition and technological developments. Furthermore, such lightweight and adaptable structural concept can assist in sustainable exploration development. After brief introduction, the concept of Pipe-Z (PZ) is presented. Next, the reconfigurability of PZ is explained and illustrated with continuous and collision-free transition from a PZ forming a Trefoil knot to a Figure-eight knot. The following sections introduce, explain and illustrate the folding mechanism of a single foldable Pipe-Z module (fPZM) and entire dPZ structure. The latter is illustrated with asynchronous (delayed) unfolding of a relatively complex Unknot. Several applications of PZ are suggested, namely for underwater and deep-space and surface habitats, for permanent, but in particular, temporary or emergency passages. As an example, a scenario of a failure of one of the modules of the International Space Station is presented where a rigid structure of 40 fPZMs bypasses the "dead link". A low-fidelity prototype of a 6-module octagonal dPZ is presented; several folding schemes including concentric toric rings are demonstrated. Practical issues of pressurization and packing are briefly discussed.

  13. HPFRCC - Extruded Pipes

    DEFF Research Database (Denmark)

    Stang, Henrik; Pedersen, Carsten

    1996-01-01

    as well as structural design. Material development was carried out considering both processing requirements as well as mechanical properties of the hardened material. A micro-mechanical model for the non-linear material behavior of the hardened material based on the stress-crack width or the $\\sigma...... itself. The structural modeling of the pipe was done making direct use of the $\\sigma-w$ material characterization. The processing technique developed is a novel type of extrusion combiningease of material mixing and few requirements for material pre-processingwith a high degree of accuracy and stability...

  14. ABSTRACTS WELDEL PIPE AND TUBE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    ABSTRACTS WELDEL PIPE AND TUBE Vol.24 No.3 May.2001 Huang Jingan(1) Strengthen, Intercourse, Coordination and Promote the Development Together Liang Aiyu(11) The Production and the Development of the Water supply pipe for City Construction From the aspects of the quality, appearance, environment protection, economic analysis etc., This article evaluates the galvanized pipe, plastic steel complex pipe, plastic aluminum pipe, stainless pipe for city water supply. In accordance with the requirements of the city construction programming and development, it is considered that the plastic aluminum pipe and plastic steel pipe instead of galvanization pipe is the trend of the development. The author also gives some constructive proposals for reference. Subject Terms:galvanized pipe complex pipe stainless pipe city water supply evaluation Zhao Rongbin,Li Guangjun(14) The TIG welding of Protected Tantalum-pipe for sheathed thermocouples used in corrosive environment The protected Tantalum-pipe welding of sheathed therocouples was investigated by TIG. The welding process and its key parameters were introduced. Welding quality influenced by processing was discussed. Subject Terms:welding protected Tantalum-pipe corrosion He Defu et al(18) Design and Research for An Automatic MIG Welding Machine of Catalyst Converter of Automobile Two different schemes for automatic MIG welding of catalyst converter of automobile have been compared and analysed. A design of automatic MIG welding machine used for catalyst converter of automobile has been suggested in this paper. Subject Terms:environmental protection automobile tri-catalyst converter MIG welding automatic welding PLC Fang Chucai(24) Cold Crack Analysis of Low Alloy High Strength Steel Weld Seam Heat Affected Area During the welding of low alloy high strength (X65 and above), the fine crack occurs in the weld (especially inner weld) and the low plastic hard brickle structure occurs in the Heat Affected Area (HAZ) sometime. This

  15. Heat Pipe Blocks Return Flow

    Science.gov (United States)

    Eninger, J. E.

    1982-01-01

    Metal-foil reed valve in conventional slab-wick heat pipe limits heat flow to one direction only. With sink warmer than source, reed is forced closed and fluid returns to source side through annular transfer wick. When this occurs, wick slab on sink side of valve dries out and heat pipe ceases to conduct heat.

  16. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  17. Temperature drops in heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Saatci, A.M.; Khalifa, A.M.A.; Akyurt, M.

    1986-01-01

    The role of entrainment in limiting heat pipe power handling capacity is discussed. The effect of entrainment on the measured temperature field in the integral heat pipe of a split system solar cooker is analyzed. An experimental set-up depicting a heat loop is presented, along with test results.

  18. Promethus Hot Leg Piping Concept

    Energy Technology Data Exchange (ETDEWEB)

    AM Girbik; PA Dilorenzo

    2006-01-24

    The Naval Reactors Prime Contractor Team (NRPCT) recommended the development of a gas cooled reactor directly coupled to a Brayton energy conversion system as the Space Nuclear Power Plant (SNPP) for NASA's Project Prometheus. The section of piping between the reactor outlet and turbine inlet, designated as the hot leg piping, required unique design features to allow the use of a nickel superalloy rather than a refractory metal as the pressure boundary. The NRPCT evaluated a variety of hot leg piping concepts for performance relative to SNPP system parameters, manufacturability, material considerations, and comparison to past high temperature gas reactor (HTGR) practice. Manufacturability challenges and the impact of pressure drop and turbine entrance temperature reduction on cycle efficiency were discriminators between the piping concepts. This paper summarizes the NRPCT hot leg piping evaluation, presents the concept recommended, and summarizes developmental issues for the recommended concept.

  19. Better than a Whip?

    DEFF Research Database (Denmark)

    Reisch, Lucia A.; Sunstein, Cass R.; Gwozdz, Wencke

    We examine whether the populations of six European nations support the use of “health nudges” – strategies that preserve free choice but steer individuals in healthier directions. To assess approval rates for health nudges across, within, and in certain parts of these populations, we analyze the ...

  20. Impact of emissions of Pridneprovsk TPP in Dnipropetrovsk on the anatomical indices of stem of two-year whip of the Tilia genus representatives

    Directory of Open Access Journals (Sweden)

    Z. V. Gritzay

    2015-09-01

    Full Text Available The paper presents discussion of the results of studying the impact of environmental contamination because of emissions of Pridneprovsk TPP in Dnipropetrovsk city on the anatomical indices of stem of two-year whip of the Tilia genus representatives. Objects of study were T. platyphyllos Scop., T. europaea L. and T. cordata Mill. Material was collected in September 2015 on two sampling areas: experimental plot – tree plantations adjacent to Pridneprovsk TPP which emissions mainly comprise the pollutants such as sulfur dioxide, nitrogen oxides, particulate matter, with the share in total volume of emissions of the Plant being 67.3%, 18.7%, 13.3%, respectively; control plot (conditionally clean – territory of the Botanical garden of Oles Honchar Dnipropetrovsk National University. For research, two-year whips located in the apical portion of branches of the same order of branching were taken. Sections were made at the medium cross-line of the stem, and stained with the alcoholic solution of phloroglucinol. 30 sections for each species were measured on each sampling area. In the objects under study on technogenically contaminated area the changes in dimensions of histological elements of the stem were found and the nature of such changes had specific differences. T. platyphyllos and T. europaea under action of toxic emissions of TPP demonstrated the increase of total size of primary cortex of stem and width of its individual components (plug, collenchyma, cortex parenchyma, maintenance of stable dimensions of the bark and its histological elements (hard and soft bast, and in T. europaea the wood radius as well, which we considered as the indicators of relative stability of these species in technogenic environment. In T. cordata in the TPP emission zone we revealed the increase in the width of plug, cortex parenchyma, and total radius of primary cortex, which could provide certain tolerance of plants of this species in the adverse conditions of

  1. 46 CFR 95.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.15-15 Section 95.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 95.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  2. 46 CFR 154.520 - Piping calculations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping calculations. 154.520 Section 154.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Process Piping Systems § 154.520 Piping calculations. A piping system must be designed to meet...

  3. 46 CFR 108.475 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.475 Section 108.475 Shipping COAST GUARD... Extinguishing Systems Foam Extinguishing Systems § 108.475 Piping. (a) Each pipe, valve, and fitting in a foam... to remove liquid from the system. (e) Piping in a foam extinguishing system must be used only...

  4. 14 CFR 27.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 27.1123 Section 27.1123... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Exhaust System § 27.1123 Exhaust piping. (a) Exhaust piping... operating temperatures. (b) Exhaust piping must be supported to withstand any vibration and inertia loads...

  5. 46 CFR 197.336 - Pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure piping. 197.336 Section 197.336 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.336 Pressure piping. Piping systems that... must— (a) Meet the ANSI Code; (b) Have the point of connection to the integral piping system of...

  6. 46 CFR 64.95 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping. 64.95 Section 64.95 Shipping COAST GUARD... SYSTEMS Cargo Handling System § 64.95 Piping. (a) Piping, valves, flanges, and fittings used in the... the piping system must comply with § 56.60-25(c) of this chapter....

  7. 46 CFR 76.23-20 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.23-20 Section 76.23-20 Shipping COAST GUARD... System, Details § 76.23-20 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  8. 46 CFR 95.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.17-15 Section 95.17-15 Shipping COAST GUARD... Extinguishing Systems, Details § 95.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of Subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  9. 46 CFR 76.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.17-15 Section 76.17-15 Shipping COAST GUARD... Systems, Details § 76.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  10. 46 CFR 193.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.15-15 Section 193.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 193.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  11. Investigation of high-frequency pipe welding

    Science.gov (United States)

    Konovalov, Nikolai A.; Lakhno, Nikolay I.; Gushchin, A. G.; Putryk, N. D.; Kovalenko, Vladimir I.; Galkina, V. A.; Veselovsky, Vladimir B.; Furmanov, Valeri B.; Kovika, Nikolai D.; Novikov, Leonid V.; Shcherbina, V. N.

    1993-01-01

    For investigation of a pipe welding process at high-frequency heating aimed at increasing of pipe quality and decreasing of spoilage, the use of high-speed recording and TV-technique is considered to be effective. The authors have created a visual inspection system for pipe welding process studies at a tube mill of the Novomoskovsk Pipe Plant.

  12. 49 CFR 192.281 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.281 Section 192.281... Plastic pipe. (a) General. A plastic pipe joint that is joined by solvent cement, adhesive, or heat fusion may not be disturbed until it has properly set. Plastic pipe may not be joined by a threaded joint...

  13. 49 CFR 195.114 - Used pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Used pipe. 195.114 Section 195.114 Transportation... PIPELINE Design Requirements § 195.114 Used pipe. Any used pipe installed in a pipeline system must comply with § 195.112 (a) and (b) and the following: (a) The pipe must be of a known specification and the...

  14. 49 CFR 195.112 - New pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false New pipe. 195.112 Section 195.112 Transportation... PIPELINE Design Requirements § 195.112 New pipe. Any new pipe installed in a pipeline system must comply with the following: (a) The pipe must be made of steel of the carbon, low alloy-high strength, or alloy...

  15. 49 CFR 192.55 - Steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Steel pipe. 192.55 Section 192.55 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.55 Steel pipe. (a) New steel pipe is... in accordance with paragraph (c) or (d) of this section. (b) Used steel pipe is qualified for use...

  16. Loop Heat Pipe Startup Behaviors

    Science.gov (United States)

    Ku, Jentung

    2016-01-01

    A loop heat pipe must start successfully before it can commence its service. The startup transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe startup behaviors. Topics include the four startup scenarios, the initial fluid distribution between the evaporator and reservoir that determines the startup scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power startup, and methods to enhance the startup success. Also addressed are the pressure spike and pressure surge during the startup transient, and repeated cycles of loop startup and shutdown under certain conditions.

  17. Nitrogen heat pipe for cryocooler thermal shunt

    Energy Technology Data Exchange (ETDEWEB)

    Prenger, F.C.; Hill, D.D.; Daney, D.E.; Daugherty, M.A. [Los Alamos National Lab., NM (United States); Green, G.F.; Roth, E.W. [Naval Surface Warfare Center, Annapolis, MD (United States)

    1995-09-01

    A nitrogen heat pipe was designed, built and tested for the purpose of providing a thermal shunt between the two stages of a Gifford-McMahan (GM) cryocooler during cooldown. The nitrogen heat pipe has an operating temperature range between 63 and 123 K. While the heat pipe is in the temperature range during the system cooldown, it acts as a thermal shunt between the first and second stage of the cryocooler. The heat pipe increases the heat transfer to the first stage of the cryocooler, thereby reducing the cooldown time of the system. When the heat pipe temperature drops below the triple point, the nitrogen working fluid freezes, effectively stopping the heat pipe operation. A small heat leak between cryocooler stages remains because of axial conduction along the heat pipe wall. As long as the heat pipe remains below 63 K, the heat pipe remains inactive. Heat pipe performance limits were measured and the optimum fluid charge was determined.

  18. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  19. B Plant process piping replacement feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  20. Efficient methods of piping cleaning

    OpenAIRE

    Orlov Vladimir Aleksandrovich; Nechitaeva Valentina Anatol'evna; Bogomolova Irina Olegovna; Shaykhetdinova Yuliya Aleksandrovna; Daminova Yuliya Farikhovna

    2014-01-01

    The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of d...

  1. Corrosion behavior in heat pipe

    Directory of Open Access Journals (Sweden)

    Anurak Rodbumrung

    2016-01-01

    Full Text Available The aim of this study was to perform life testing and determine the effect of working fluid on the corrosion of a heat pipe with a sintered wick. The heat pipe was made from a copper tube. The inner heat pipe was filled with 99.97% pure copper powder as a dendritic for the sintering process. The heat pipe had an outer diameter of 6 mm with a length of 200 mm, and distilled water and ethanol were the working fluids. The operating temperature at the evaporator was 125°C. The analysis consisted of using a scanning electron microscope, energy dispersive X-ray spectrometry and atomic absorption spectroscopy. The results of the scanning electron microscope and energy dispersive X-ray spectrometry analysis showed that the corrosion of the heat pipe was uniform. The result of the atomic absorption spectroscopy indicated that the concentration of the copper in the ethanol as the working fluid was greater than in the distilled water as the working fluid, and the highest concentration of copper particles in the ethanol was 22.7499 ppm or 0.0409 mg after testing for 3000 h. The concentration of copper was higher when the length of the life test increased due to corrosion of the heat pipe.

  2. Heat pipe turbine vane cooling

    Energy Technology Data Exchange (ETDEWEB)

    Langston, L.; Faghri, A. [Univ. of Connecticut, Storrs, CT (United States)

    1995-10-01

    The applicability of using heat pipe principles to cool gas turbine vanes is addressed in this beginning program. This innovative concept involves fitting out the vane interior as a heat pipe and extending the vane into an adjacent heat sink, thus transferring the vane incident heat transfer through the heat pipe to heat sink. This design provides an extremely high heat transfer rate and an uniform temperature along the vane due to the internal change of phase of the heat pipe working fluid. Furthermore, this technology can also eliminate hot spots at the vane leading and trailing edges and increase the vane life by preventing thermal fatigue cracking. There is also the possibility of requiring no bleed air from the compressor, and therefore eliminating engine performance losses resulting from the diversion of compressor discharge air. Significant improvement in gas turbine performance can be achieved by using heat pipe technology in place of conventional air cooled vanes. A detailed numerical analysis of a heat pipe vane will be made and an experimental model will be designed in the first year of this new program.

  3. Belgian experience in applying the {open_quotes}leak-before-break{close_quotes} concept to the primary loop piping

    Energy Technology Data Exchange (ETDEWEB)

    Gerard, R.; Malekian, C.; Meessen, O. [Tractebel Energy Engineering, Brussels (Belgium)

    1997-04-01

    The Leak Before Break (LBB) concept allows to eliminate from the design basis the double-ended guillotine break of the primary loop piping, provided it can be demonstrated by a fracture mechanics analysis that a through-wall flaw, of a size giving rise to a leakage still well detectable by the plant leak detection systems, remains stable even under accident conditions (including the Safe Shutdown Earthquake (SSE)). This concept was successfully applied to the primary loop piping of several Belgian Pressurized Water Reactor (PWR) units, operated by the Utility Electrabel. One of the main benefits is to permit justification of supports in the primary loop and justification of the integrity of the reactor pressure vessel and internals in case of a Loss Of Coolant Accident (LOCA) in stretch-out conditions. For two of the Belgian PWR units, the LBB approach also made it possible to reduce the number of large hydraulic snubbers installed on the primary coolant pumps. Last but not least, the LBB concept also facilitates the steam generator replacement operations, by eliminating the need for some pipe whip restraints located close to the steam generator. In addition to the U.S. regulatory requirements, the Belgian safety authorities impose additional requirements which are described in details in a separate paper. An novel aspect of the studies performed in Belgium is the way in which residual loads in the primary loop are taken into account. Such loads may result from displacements imposed to close the primary loop in a steam generator replacement operation, especially when it is performed using the {open_quote}two cuts{close_quotes} technique. The influence of such residual loads on the LBB margins is discussed in details and typical results are presented.

  4. Weakening Measures of Bull-whip Effect in Garment Industry based on Supply Chain Management%基于SCM的服装行业弱化“牛鞭效应”路径选择

    Institute of Scientific and Technical Information of China (English)

    刘邦凡; 詹国辉

    2014-01-01

    The current competition in garment industry is already showing the competition of supply chains .Each node company , which on the supply chain of garment industry , makes mutual cooperation to weaken the bull -whip effect , in order to eliminate unnecessary backlog of inventory on the supply chain of garment industry , thereby enhancing the over-all competitiveness of the garment industry supply chain .This paper describes garment industry supply chain and bull -whip effect, simultaneously explores the causes resulting in the bull -whip effect.Then, based on the mechanism of ac-tion in supply chain management of garment industry , the paper puts forward making the appropriate path to weaken the bull-whip effect , in order to achieve healthy and orderly development of the garment industry .%目前服装行业竞争已然呈现出供应链间的竞争,服装行业供应链上各节点企业需通过相互合作弱化牛鞭效应,以消除服装行业供应链中不必要的积压库存,从而增强整体服装行业供应链的竞争力。通过对服装行业供应链和牛鞭效应的描述,本文探究了服装行业供应链致使牛鞭效应的成因;在剖析服装行业供应链管理作用机理的基础上,研究通过相应路径来弱化牛鞭效应,实现服装行业有序而又良性化发展。

  5. Flat heat pipe design, construction, and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

    1999-08-02

    This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

  6. 46 CFR 61.15-5 - Steam piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam piping. 61.15-5 Section 61.15-5 Shipping COAST... Periodic Tests of Piping Systems § 61.15-5 Steam piping. (a) Main steam piping shall be subjected to a.... If the covering of the piping is not removed, the test pressure shall be maintained on the piping...

  7. 49 CFR Appendix B to Part 192 - Qualification of Pipe

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Qualification of Pipe B Appendix B to Part 192... Pipe I. Listed Pipe Specifications API 5L—Steel pipe, “API Specification for Line Pipe” (incorporated by reference, see § 192.7). ASTM A53/A53M—Steel pipe, “Standard Specification for Pipe, Steel Black...

  8. Introduction to Loop Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Loop Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. This course will discuss operating principles and performance characteristics of a loop heat pipe. Topics include: 1) pressure profiles in the loop; 2) loop operating temperature; 3) operating temperature control; 4) loop startup; 4) loop shutdown; 5) loop transient behaviors; 6) sizing of loop components and determination of fluid inventory; 7) analytical modeling; 8) examples of flight applications; and 9) recent LHP developments.

  9. 46 CFR 169.652 - Bilge piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge piping. 169.652 Section 169.652 Shipping COAST... Electrical Bilge Systems § 169.652 Bilge piping. (a) All vessels of 26 feet in length and over must be... than 120 feet in length the bilge pipe must be not less than one and one-half inches. Piping on...

  10. China Steel Pipes Demand Rising Steadily

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Steel pipes industry is an industry to play a decisive role in the national economic development. During the Tenth Five-Year Plan period, the steel pipes output has been increased distinctly. Based on experts forecast,the steel pipes demand in China will still be in tendency of increase during the Eleventh FiveYear Plan period, which will doubtlessly bring new opportunity and challenge to the steel pipes enterprises in China.

  11. 46 CFR 76.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.15-15 Section 76.15-15 Shipping COAST GUARD... Extinguishing Systems, Details § 76.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 p.s.i. (b) All piping, in nominal sizes not over 3/4 inch, shall be...

  12. Assessment of the integrity of welded pipes

    OpenAIRE

    Šarkoćević, Živče; Arsić, Miodrag; Sedmak, Aleksandar; MEĐO, Bojan; Mišić, Milan; id_orcid 0000-0003-0550-1851

    2014-01-01

    The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on pipes withdrawn from exploatation after 70 000 hours at service. Defect influence of the surface crack on the integrity of pipes was tested using hydrostatic pressure of pipes with axial surface crack in the base material. Fracture behaviour was tested using modified compact ...

  13. BIMORPH PIEZOELECTRIC ACTUATOR FOR SMALL PIPE ROBOT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An experimental bimorph piezoelectric element (PZT) actuator for small pipe robot is developed. The robotcan move in φ 20 mm pipe, and can carry a CCD camera for detecting cracks or fine holes on inner surface of pipe. Thevelocity of the robot can reach 17~22 mm/s for vertical pipe up/down, respectively. Moving principle and its perfor-mance characteristics are presented.

  14. Analysis of Municipal Pipe Network Franchise Institution

    Science.gov (United States)

    Yong, Sun; Haichuan, Tian; Feng, Xu; Huixia, Zhou

    Franchise institution of municipal pipe network has some particularity due to the characteristic of itself. According to the exposition of Chinese municipal pipe network industry franchise institution, the article investigates the necessity of implementing municipal pipe network franchise institution in China, the role of government in the process and so on. And this offers support for the successful implementation of municipal pipe network franchise institution in China.

  15. Smoking water pipe is injurious to lungs

    DEFF Research Database (Denmark)

    Sivapalan, Pradeesh; Ringbæk, Thomas; Lange, Peter

    2014-01-01

    This review describes the pulmonary consequences of water pipe smoking. Smoking water pipe affects the lung function negatively, is significantly associated with chronic obstructive pulmonary disease and increases the risk of lung infections. Case reports suggest that regular smokers of water pipe...

  16. 46 CFR 108.449 - Piping tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping tests. 108.449 Section 108.449 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.449 Piping tests. (a... piping installation. (b) When tested with CO2 or other inert gas under a pressure of 70 kilograms...

  17. 14 CFR 29.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 29.1123 Section 29.1123... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Exhaust System § 29.1123 Exhaust piping. (a) Exhaust piping must be heat and corrosion resistant, and must have provisions to prevent failure due to...

  18. 46 CFR 76.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.10-15 Section 76.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 76.10-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements...

  19. 49 CFR 195.128 - Station piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Station piping. 195.128 Section 195.128 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.128 Station piping. Any pipe to be installed in a station that...

  20. 46 CFR 193.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.10-15 Section 193.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 193.10-15 Piping. (a) All piping, valves, and fittings, shall meet...

  1. 46 CFR 95.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.10-15 Section 95.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 95.10-15 Piping. (a) All piping, valves, and fittings shall meet the...

  2. 14 CFR 25.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 25.1123 Section 25.1123... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Exhaust System § 25.1123 Exhaust piping. For powerplant and auxiliary power unit installations, the following apply: (a) Exhaust piping must be heat...

  3. 46 CFR 132.110 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 132.110 Section 132.110 Shipping COAST GUARD....110 Piping. (a) Except as provided for liftboats by § 134.180 of this subchapter, each fitting, flange, valve, and run of piping must meet the applicable requirements of part 128 of this subchapter....

  4. Thermodynamic aspects of heat pipe operation

    Science.gov (United States)

    Richter, Robert; Gottschlich, Joseph

    1990-01-01

    An expanded heat pipe operating model is described which includes thermodynamic and heat transfer considerations to reconcile disparities between actual and theoretical heat pipe performances. The analysis shows that thermodynamic considerations can explain the observed heat pipe performance limitations. A full understanding of thermodynamic processes could lead to advanced concepts for thermal transport devices.

  5. 46 CFR 154.660 - Pipe welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipe welding. 154.660 Section 154.660 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR... § 154.660 Pipe welding. (a) Pipe welding must meet Part 57 of this chapter. (b) Longitudinal butt...

  6. 49 CFR 192.59 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.59 Section 192.59 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.59 Plastic pipe. (a) New plastic pipe... specification; and (2) It is resistant to chemicals with which contact may be anticipated. (b) Used plastic...

  7. 49 CFR 236.712 - Brake pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Brake pipe. 236.712 Section 236.712 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.712 Brake pipe. A pipe...

  8. 46 CFR 76.25-30 - Piping.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Automatic Sprinkling System, Details § 76.25-30 Piping. (a) All piping, valves, and fittings of ferrous materials shall be... piping, valves, fittings, and sprinkler heads shall be securely supported, and, where...

  9. 33 CFR 127.1101 - Piping systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Piping systems. 127.1101 Section... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1101 Piping systems. Each piping system within the marine transfer area for LHG used for the transfer of LHG must meet the...

  10. 46 CFR 56.10-5 - Pipe.

    Science.gov (United States)

    2010-10-01

    ...) Ferrous pipe. ASTM Specification A 53 (incorporated by reference, see § 56.01-2) furnace welded pipe shall... found from Table 56.60-1(a). (3) Copper-nickel alloys may be used for water and steam service within the... specifically permitted by this part. (6) Aluminum-alloy pipe or tube along with similar junction equipment may...

  11. PPOOLEX experiments with two parallel blowdown pipes

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-01-15

    This report summarizes the results of the experiments with two transparent blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through either one or two vertical transparent blowdown pipes to the condensation pool. Five experiments with one pipe and six with two parallel pipes were carried out. The main purpose of the experiments was to study loads caused by chugging (rapid condensation) while steam is discharged into the condensation pool filled with sub-cooled water. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. In the experiments the initial temperature of the condensation pool water varied from 12 deg. C to 55 deg. C, the steam flow rate from 40 g/s to 1 300 g/s and the temperature of incoming steam from 120 deg. C to 185 deg. C. In the experiments with only one transparent blowdown pipe chugging phenomenon didn't occur as intensified as in the preceding experiments carried out with a DN200 stainless steel pipe. With the steel blowdown pipe even 10 times higher pressure pulses were registered inside the pipe. Meanwhile, loads registered in the pool didn't indicate significant differences between the steel and polycarbonate pipe experiments. In the experiments with two transparent blowdown pipes, the steamwater interface moved almost synchronously up and down inside both pipes. Chugging was stronger than in the one pipe experiments and even two times higher loads were measured inside the pipes. The loads at the blowdown pipe outlet were approximately the same as in the one pipe cases. Other registered loads around the pool were about 50-100 % higher than with one pipe. The experiments with two parallel blowdown pipes gave contradictory results compared to the earlier studies dealing with chugging loads in case of multiple pipes. Contributing

  12. The Kinematic Chain Model Analysis of Two Technical Aspects of Sanda Whip Leg Movements%散打鞭腿动作技术的二环节链模型的运动学分析

    Institute of Scientific and Technical Information of China (English)

    张江龙; 韩伟; 张欣然

    2013-01-01

    The whip leg action is the core of Sanda technology, in order to concise descriptions, the Sanda whip leg movement is simplified into a two link kinematic chain model. Whip leg movements of the hip, knee and thigh, calf links determine the position vector in three-dimensional plane, and by these to determine the whip leg movements the kinematics parameters of each joint, and links, and then determine the objective function (terminal velocity V), three-dimensional kinematics equation of human body whip leg action is established, and makes whip leg movement of each aspect have mathematical description. The study results include that: 1) the angular velocity of the thigh leg whip action is determined by the angular velocity and angular velocity of hip joint the calf, angular velocity is determined by the angular velocity of thigh and knee, work closely with the three determines the whip leg tip speed;2) in the T1 stage, leg dive after the curvature should less than 450°, while in the time of attacking leg leaving off the ground, the angular velocity greater than that of the leg link thigh, which is the most beneficial to increase the knee joint speed, and the angular velocity of knee joint as leg attack back away is mainly decided by leg pedaling the ground reaction force;3) in the T2 stage, the fully folding the leg and thigh is in favor of knee joint angular velocity Increase;4) in the whip leg link chain model of human body, the principle theory of whip compliance follows the momentum transfer from proximal to distal link by link, timely and effective braking cocoa hip to have knee momentum increase, the brake of the knee joint can make the momentum transfer to the end, and lead to the end acceleration. 5) in the chain model of Sanda whip leg links only links and joints having time coordination can they play the best effect at the end attack.%  鞭腿动作是散打腿法技术的核心,将散打鞭腿动作简化为一个二环节运动链模型,对散

  13. This is not a Pipe

    DEFF Research Database (Denmark)

    Just, Sine Nørholm

    2016-01-01

    or unwilling to listen to, let alone engage with, emotionally guided bottom-up participation. Using an illustrative case of a Danish public debate over an alleged ban on liquorice pipes, this article argues that the disconnect between invitation and participation may be explained by the fact...

  14. Investigation of sand in piping

    Directory of Open Access Journals (Sweden)

    Nađ Laslo

    2012-01-01

    Full Text Available For the investigation of the grain size distribution of the material washed out from the piping, we used 20 samples originating from different places on the Danube and the Tisza rivers. The grading characteristics of these samples were investigated based on selected grain sizes and the uniformity of gradients. Based on the investigations it has become possible to identify which grain size fractions are likely to be washed out, and how to characterize those fractions. Based on the grain size distribution curves it has been made possible to define the boundaries of the zone susceptible to piping. The zone limits of granular soils liquefied by earthquakes and the zone limits of the soil out washed from piping are very similar. This apparent correspondence already formerly raised the hypothetic question of whether piping occurring during high flood can be simulated by shape to similar surface liquefaction phenomena experienced during earthquakes, as in both cases a volcanic cone is formed through the crater of which water is constantly issuing, dragging away solid particles.

  15. Localized turbulence in pipe flow

    NARCIS (Netherlands)

    Kuik, D.J.

    2011-01-01

    In this thesis the transition to turbulence in pipe flow is investigated. At low Reynolds numbers, the flow returns to the laminar state spontaneously. At high Reynolds number a small perturbation causes the flow to suddenly become turbulent. In the intermediate regime localized turbulence is observ

  16. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...

  17. Spinning pipe gas lens revisited

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-01-01

    Full Text Available The graded index (GRIN-like) medium generated by gas inside a heated steel pipe when rotated about its longitudinal axis has the ability to focus a laser beam. While the effective focal length of such a system has previously been studied...

  18. Efficient methods of piping cleaning

    Directory of Open Access Journals (Sweden)

    Orlov Vladimir Aleksandrovich

    2014-01-01

    Full Text Available The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of drainage pipes. The co-authors emphasize that the use of ice compared to other methods of pipe cleaning has a number of advantages due to the relative simplicity and cheapness of the process, economical efficiency and lack of environmental risk. The equipment for performing ice cleaning is presented, its technological options, terms of cleansing operations, as well as the volumes of disposed pollution per unit length of the water supply and drainage pipelines. It is noted that ice cleaning requires careful planning in the process of cooking ice and in the process of its supply in the pipe. There are specific requirements to its quality. In particular, when you clean drinking water system the ice applied should be hygienically clean and meet sanitary requirements.In pilot projects, in particular, quantitative and qualitative analysis of sediments adsorbed by ice is conducted, as well as temperature and the duration of the process. The degree of pollution of the pipeline was estimated by the volume of the remote sediment on 1 km of pipeline. Cleaning pipelines using ice can be considered one of the methods of trenchless technologies, being a significant alternative to traditional methods of cleaning the pipes. The method can be applied in urban pipeline systems of drinking water supply for the diameters of 100—600 mm, and also to diversion collectors. In the world today 450 km of pipelines are subject to ice cleaning method.Ice cleaning method is simple

  19. Preliminary Design of IHTS Piping Support for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nak-Hyun; Koo, Gyeong-Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A pipe support is a designed element that transfer the load from pipe to the supporting structures. Providing sufficient pipe wall thickness and installing proper supports are most important elements for structural integrity of the piping system. Piping supports are generally referred to as device used in supporting the weight of the piping. The weight includes that of the pipe proper, the content the pipe carries, and the pipe converting, such as insulation. A FE analysis was performed to select variable spring hanger of IHTS hot-leg piping for PGSFR. The calculated values will be used to design variable spring hanger.

  20. Underground pipe inspection device and method

    Science.gov (United States)

    Germata, Daniel Thomas [Wadsworth, IL

    2009-02-24

    A method and apparatus for inspecting the walls of an underground pipe from inside the pipe in which an inspection apparatus having a circular planar platform having a plurality of lever arms having one end pivotably attached to one side of the platform, having a pipe inspection device connected to an opposite end, and having a system for pivoting the lever arms is inserted into the underground pipe, with the inspection apparatus oriented with the planar platform disposed perpendicular to the pipe axis. The plurality of lever arms are pivoted toward the inside wall of the pipe, contacting the inside wall with each inspection device as the apparatus is conveyed along a length of the underground pipe.

  1. 46 CFR 154.310 - Cargo piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping systems. 154.310 Section 154.310 Shipping... Arrangements § 154.310 Cargo piping systems. Cargo liquid or vapor piping must: (a) Be separated from other piping systems, except where an interconnection to inert gas or purge piping is required by §...

  2. 46 CFR 154.500 - Cargo and process piping standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo and process piping standards. 154.500 Section 154... Equipment Cargo and Process Piping Systems § 154.500 Cargo and process piping standards. The cargo liquid and vapor piping and process piping systems must meet the requirements in §§ 154.503 through...

  3. 46 CFR 154.522 - Materials for piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Materials for piping. 154.522 Section 154.522 Shipping... Process Piping Systems § 154.522 Materials for piping. (a) The materials for piping systems must meet § 154.625 for the minimum design temperature of the piping, except the material for open ended...

  4. 46 CFR 119.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 119.730 Section... INSTALLATION Piping Systems § 119.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1) Non-vital systems; (2) Aluminum fuel piping on...

  5. Piping inspection carriage having axially displaceable sensor

    Science.gov (United States)

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  6. Wave Propagation in Pipe-like Structures

    DEFF Research Database (Denmark)

    Morsbøl, Jonas

    Pipe-like shell structures are found in a wide range of practical applications such as: Wind turbine towers, jet engines, brass instruments, and piping systems. For many of these applications, structural vibrations play an important role for their performance. This thesis will in particular focus...... on how the curvature on a thin-walled pipe, as well as a changing radius along a straight thin-walled pipe, affects the waveguide properties. It shows that the waveguide properties of curved pipes roughly can be divided into three regimes: The curved beam regime, the cylinder regime, and the torus regime....... In the curved beam regime the waveguide properties of the pipe can be approximated by classical curved beam theory while in the cylinder regime they can be approximated by cylindrical shell theory. In the torus regime none of the two other regimes apply, and a full-blown shell model is needed. For the straight...

  7. Lightweight Heat Pipes Made from Magnesium

    Science.gov (United States)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  8. Intermediate Temperature Fluids for Heat Pipes and Loop Heat Pipes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop heat pipe and loop heat pipe (LHP) working fluids for what is known as the intermediate...

  9. Pipes under internal pressure and bending

    CERN Document Server

    Catinaccio, A

    2009-01-01

    This article covers the general behaviour of a straight uniform pipe, with built-in open ends, subject to internal pressure and in plane bending or curvature. It is intended as a summary of the basic equations driving the unintuitive phenomena of bending and instability of pipes under internal pressure. The analysis covers in addition the investigation of opposite pressure stabilisation effects that can be observed in some orthotropic material pipes like composite pressure hoses.

  10. Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    OpenAIRE

    2016-01-01

    The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled wi...

  11. Development of bore tools for pipe inspection

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    In the International Thermonuclear Reactor (ITER), replacement and maintenance on in-vessel components requires that all cooling pipes connected be cut and removed, that a new component be installed, and that all cooling pipes be rewelded. After welding is completed, welded area must be inspected for soundness. These tasks require a new work concept for securing shielded area and access from narrow ports. Tools had to be developed for nondestructive inspection and leak testing to evaluate pipe welding soundness by accessing areas from inside pipes using autonomous locomotion welding and cutting tools. A system was proposed for nondestructive inspection of branch pipes and the main pipe after passing through pipe curves, the same as for welding and cutting tool development. Nondestructive inspection and leak testing sensors were developed and the basic parameters were obtained. In addition, the inspection systems which can move inside pipes and conduct the nondestructive inspection and the leak testing were developed. In this paper, an introduction will be given to the current situation concerning the development of nondestructive inspection and leak testing machines for the branch pipes. (author)

  12. Plastic pipe systems failure investigation and diagnosis

    CERN Document Server

    Farshad, Mehdi

    2011-01-01

    Industrial and domestic piping is increasingly made from various plastics and composites, and these materials withstand heavy use over long periods. They are, however, affected by environmental and other factors over time and can degrade, causing major problems within piping systems. Farshad's book deals with why plastic pipes and systems fail, and with how to investigate and diagnose such failures. Pipes may buckle, fracture, change in dimensions and colour, blister and delaminate, corrode through stress, be abraded and obstructed: all these cause problems and lead to loss of efficient operat

  13. Fracture mechanics parameters of multilayer pipes

    Directory of Open Access Journals (Sweden)

    Šestáková L.

    2007-10-01

    Full Text Available Multilayer pipes consisting of different materials are frequently used in praxis because of partial improvement of the properties of pipe systems. To estimate lifetime of these pipes the basic fracture parameters have to be determined. In this work finite element calculations are applied in order to estimate the stress intensity factor K and T-stress values for a new type of non-homogenous C-shape specimen. The application of calculated K and T values to laboratory estimation of fracture toughness and its transferability to real pipe system is discussed.

  14. Water pipe smoking and dermatologic consequences.

    Science.gov (United States)

    Wollina, U

    2015-08-01

    Water pipe smoking is a recently growing addiction worldwide. It has become popular in Africa and the Western World and enfaces a renaissance in Middle East and Asia. The smoking technique leads to a different exposure to potential hazardous compounds compared to cigarette or classical pipe smoking. The common assumption that water pipe smoking is less dangerous to health is not substantiated by scientific data. Non-tobacco-based preparations reduce the exposure to nicotine but may contain equal or even higher concentrations of other toxic compounds. The medical literature on adverse effect of water pipe smoking on skin and oral mucosa is reviewed but future research is a demand.

  15. Location of Agricultural Drainage Pipes and Assessment of Agricultural Drainage Pipe Conditions Using Ground Penetrating Radar

    Science.gov (United States)

    Methods are needed to not only locate buried agricultural drainage pipe, but to also determine if the pipes are functioning properly with respect to water delivery. The primary focus of this research project was to confirm the ability of ground penetrating radar (GPR) to locate buried drainage pipe ...

  16. Literature review and experimental investigation of heat pipes

    Science.gov (United States)

    Barsch, W. O.; Schoenhals, R. J.; Viskanta, R.; Winter, E. R. F.

    1971-01-01

    Tests on heat pipes determine operational limits, external boundary conditions, noncondensable gas effects, startup behavior, and geometric configurations. Experiment consists of design, construction, and testing of an apparatus for measuring wick properties, conventional heat pipes and coplanar heat pipes.

  17. Heat Pipe with Axial Wick

    Science.gov (United States)

    Ambrose, Jay H. (Inventor); Holmes, Rolland (Inventor)

    2016-01-01

    A heat pipe has an evaporator portion, a condenser portion, and at least one flexible portion that is sealingly coupled between the evaporator portion and the condenser portion. The flexible portion has a flexible tube and a flexible separator plate held in place within the flexible tube so as to divide the flexible tube into a gas-phase passage and a liquid-phase artery. The separator plate and flexible tube are configured such that the flexible portion is flexible in a plane that is perpendicular to the separator plate.

  18. Buckling Characteristics of Cylindrical Pipes

    Institute of Scientific and Technical Information of China (English)

    Toshiaki Sakurai

    2015-01-01

    This paper describes the buckling pattern of the body frame by energy absorbed efficiency of crashworthiness related toresearch of the buckling characteristics of aluminum cylindrical pipes with various diameters formed mechanical tools. Experimentswere performed by the quasi-static test without lubrication between specimen and equipment. According to the change in the radiusversus thickness of the specimen, the buckling phenomena are transformed from folding to bellows and the rate of energy absorptionis understood. In crashworthiness, frames are characterized by the folding among three patterns from the absorbed energy efficiencypoint of view and weight reduction. With the development of new types of transport such as electric vehicles, innovated bodystructure should be designed.

  19. INFLUENCE OF PIPE ANGLE ON BEDLOAD TRANSPORT IN AN INCLINED PIPE

    Institute of Scientific and Technical Information of China (English)

    David M. ADMIRAAL

    2003-01-01

    A number of reservoirs in Nebraska have been retrofitted with sediment bypass systems to extend their lifespan. The bypass systems are best suited for rerouting sediment that travels as bedload since bedload is relatively easy to capture at reservoir inlets. Because of their size, the captured sediment particles sometimes travel as bedload in the bypass system as well. Studies have been done to quantify head losses in horizontal pipes with different water and sediment flow rates, and the results have been used to assess the practicality of bypass systems for specific prototypes. However, much less has been done to evaluate the performance of inclined pipes for bypassing sediment. Furthermore, little has been done to understand how bedforms influence head losses in the pipes. In order to better understand the behavior of sediment transport within pipes, an experimental apparatus was constructed to simulate a range of sediment loading rates, water flow rates, and pipe inclination angles. Three pressure taps with a spacing of 1.5 m were installed in the pipe at a location sufficiently downstream from the inlet. One section of the pipe was replaced with an acrylic pipe of equivalent internal diameter so that bedform shapes and sizes could be measured for different flow conditions. For each flow condition, the pressure drop in the pipe and the sediment transport rate are recorded over time. For coarse sediment, the inclination angle ofthe pipe and the sediment transport rate both have a strong influence on flow properties, and, thus, head losses in the pipe.

  20. PE管管材性能探讨%Pipe Performance of PE Pipe

    Institute of Scientific and Technical Information of China (English)

    李子臣

    2011-01-01

    目前中国的塑料管道正在稳步发展,其中PE管强劲的发展势头最为令人瞩目.PE管的使用领域广泛,其中给水管和燃气管是其两个最大的应用市场.本文简单阐述了PE管的组成成分,对比分析了PE管的性能,最后论述了PE管的用途.%At present, China's plastic pipe is steadily developing, and strong momentum of development of the PE pipe is the most remarkable. PE pipe has a wide use, in which water pipe and gas pipe are two largest markets for application. This paper briefly describes the composition of PE pipe, makes comparative analysis of its performance, and finally discusses the use of PE pipe.

  1. 49 CFR 230.62 - Dry pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Dry pipe. 230.62 Section 230.62 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Pipes §...

  2. Technical Study of Slotted Pipe Working

    Institute of Scientific and Technical Information of China (English)

    Yang Helai; Su Feng

    1996-01-01

    @@ Introduction Slotted pipe is a kind of tool used in the oilfield for drilling wells to proof sand. There are many difficulties in working out several thousands seams which are about 0.3mm to 0.6 mm wide on a 10 meter long alloy steel pipe,and the types are various, such as straight and trapezoid.

  3. Heat-pipe thermionic reactor concept

    DEFF Research Database (Denmark)

    Storm Pedersen, E.

    1967-01-01

    Main components are reactor core, heat pipe, thermionic converter, secondary cooling system, and waste heat radiator; thermal power generated in reactor core is transported by heat pipes to thermionic converters located outside reactor core behind radiation shield; thermionic emitters are in direct...

  4. Updating piping probabilities with survived historical loads

    NARCIS (Netherlands)

    Schweckendiek, T.; Kanning, W.

    2009-01-01

    Piping, also called under-seepage, is an internal erosion mechanism, which can cause the failure of dikes or other flood defence structures. The uncertainty in the resistance of a flood defence against piping is usually large, causing high probabilities of failure for this mechanism. A considerable

  5. 75 FR 877 - Drill Pipe From China

    Science.gov (United States)

    2010-01-06

    ... COMMISSION Drill Pipe From China AGENCY: International Trade Commission. ACTION: Institution of antidumping... States is materially retarded, by reason of imports from China of drill pipe, provided for in subheadings... Government of China. Unless the Department of Commerce extends the time for initiation pursuant to...

  6. Heat pipe thermosyphon heat performance calculation

    Science.gov (United States)

    Novomestský, Marcel; Kapjor, Andrej; Papučík, Štefan; Siažik, Ján

    2016-06-01

    In this article the heat performance of the heat pipe thermosiphon is achieved through numerical model. The heat performance is calculated from few simplified equations which depends on the working fluid and geometry. Also the thermal conductivity is good to mentioning, because is really interesting how big differences are between heat pipes and full solid surfaces.

  7. Energy Industry:Hunger for Steel Pipe?

    Institute of Scientific and Technical Information of China (English)

    Berry Chen

    2009-01-01

    @@ After the ups and downs of Chinese steel pipe market in 2008, industry structure changes are taking place quietly. Some enterprises with high-end oil and natural gas pipes and high-pressure boiler tubes have not been much offected in this storm, and won good market demand, while others with low-end products have been eliminated.

  8. DEPOSITION OF PARTICLES IN TURBULENT PIPE FLOW

    Institute of Scientific and Technical Information of China (English)

    Xiaowei Luo; Suyuan Yu

    2006-01-01

    The deposition of particles in turbulent pipe flow was investigated in terms of two mechanisms, turbulent and thermophoretic. A general equation incorporating these two mechanisms was formulated to calculate the deposition efficiency of aerosol particles in turbulent pipe flow together with thermophoretic deposition. The validity of the equation was confirmed by good agreement between calculated and measured results.

  9. Water driven turbine/brush pipe cleaner

    Science.gov (United States)

    Werlink, Rudy J. (Inventor)

    1995-01-01

    Assemblies are disclosed for cleaning the inside walls of pipes and tubes. A first embodiment includes a small turbine with angled blades axially mounted on one end of a standoff support. An O-ring for stabilizing the assembly within the pipe is mounted in a groove within the outer ring. A replaceable circular brush is fixedly mounted on the opposite end of the standoff support and can be used for cleaning tubes and pipes of various diameters, lengths and configurations. The turbine, standoff support, and brush spin in unison relative to a hub bearing that is fixedly attached to a wire upstream of the assembly. The nonrotating wire is for retaining the assembly in tension and enabling return of the assembly to the pipe entrance. The assembly is initially placed in the pipe or tube to be cleaned. A pressurized water or solution source is provided at a required flow-rate to propel the assembly through the pipe or tube. The upstream water pressure propels and spins the turbine, standoff support and brush. The rotating brush combined with the solution cleans the inside of the pipe. The solution flows out of the other end of the pipe with the brush rotation controlled by the flow-rate. A second embodiment is similar to the first embodiment but instead includes a circular shaped brush with ring backing mounted in the groove of the exterior ring of the turbine, and also reduces the size of the standoff support or eliminates the standoff support.

  10. Geothermal drill pipe corrosion test plan

    Energy Technology Data Exchange (ETDEWEB)

    Caskey, B.C.; Copass, K.S.

    1980-12-01

    Plans are presented for conducting a field test of drill pipe corrosion, comparing air and nitrogen as drilling fluids. This test will provide data for evaluating the potential of reducing geothermal well drilling costs by extending drill pipe life and reducing corrosion control costs. The 10-day test will take place during fall 1980 at the Baca Location in Sandoval County, New Mexico.

  11. Inspection technology for high pressure pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  12. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  13. Casing free district heating pipes; Mantelfria fjaerrvaermeroer

    Energy Technology Data Exchange (ETDEWEB)

    Saellberg, Sven-Erik; Nilsson, Stefan [Swedish National Testing and Research Inst., Goeteborg (Sweden)

    2005-07-01

    Previous studies have shown that polyurethane insulation (PUR foam) on district heating pipes acts as protection against water if it is of good quality, i.e. free from cracks, cavities and other defects. On the other hand water vapour easily diffuses through PUR foam. However this is not a problem as long as the steel pipe is warmer than the surface layer, since the high temperature will prevent the vapour from condensating. What will happen with the insulation of a casing free district heating pipe where the ground water level occasionally reaches above the pipe has not been studied in detail. The current project has studied to what extent moisture enters the PUR foam insulation of two approximately one meter long district heating pipes without casing which have been in the ground for four years. Occasionally, the ground-water has entirely covered the pipes. In addition, the foam has been studied with respect to damage from the surrounding backfill material. Test specimens were taken out of the casing free pipes and were analysed with respect to moisture content. Additional measurements were done with a moisture indicator, and the electric resistance between the steel pipes and the four surveillance wires in each pipe was measured. The results from the various measurement techniques were the compared. The results show that the PUR foam remains dry as long as the service pipe is hot if no defects, such as crack and cavities, are present. Close to the service pipe, the foam actually dries out over time. The moisture content of the middle layer remains more or less constant. Only the colder parts on the outside exhibit an increase in moisture content. It was also seen that defects may lead to water ingress with subsequent humidification of the foam. However, the damaged foam area is limited. This is not the case for a regular pipe with a vapour tight casing, where experience show that moisture tend to spread along the pipe. The pipes were buried in sand and no

  14. Equivalent thermal conductivity of heat pipes

    Institute of Scientific and Technical Information of China (English)

    Zesheng LU; Binghui MA

    2008-01-01

    In precision machining, the machining error from thermal distortion carries a high proportion of the total errors. If a precision machining tool can transfer heat fast, the thermal distortion will be reduced and the machining precision will be improved. A heat pipe working based on phase transitions of the inner working liquid transfers heat with high efficiency and is widely applied in spaceflight and chemical industries. In mechanics, applications of heat pipes are correspondingly less. When a heat pipe is applied to a hydrostatic motor-ized spindle, the thermal distortion cannot be solved dur-ing the heat transfer process because thermal conductivity or equivalent thermal conductivity should be provided first for special application in mechanics. An equivalent thermal conductivity model based on equivalent thermal resistances is established. Performance tests for a screen wick pipe, gravity pipe, and rotation heat pipe are done to validate the efficiency of the equivalent thermal conduc-tivity model. The proposed model provides a calculation method for the thermal distortion analysis of heat pipes applied in the motorized spindle.

  15. Research of Spined Heat-Exchanging Pipes

    Directory of Open Access Journals (Sweden)

    Akulov Kirill

    2016-01-01

    Full Text Available Work is devoted to a research of spined heat-exchanging pipes that are assumed to use in air-cooler exchangers (ACE. The proposed new geometry of finning allows intensifying heat exchange and improving the efficiency of air coolers. It is caused by the increased area of finned surface with a value of finning ratio (the ratio of the area of the smooth pipe to a finned one to 42.7, while in the commercially available ACE, the figure is 22. Besides, the geometrical arrangement of the pin fins turbulizes the airflow. It should be mentioned that an easier method of manufacturing of heat exchanging pipes is proposed to use, which will reduce their costs. The proposed heat exchange pipes are made by winding cut aluminum strip to the supporting pipe or stretching stamped blanks on it. To increase the efficiency of the heat exchange surface pin fins should be as thin and long as possible; however, their strength should be sufficient for deformation-free operation. Fins should be staggered to maximize the distance between them. Spined heat-exchange pipes are designed to operate in a commercially produced ACE and their service is carried out similarly to commercially produced transversely finned pipes.

  16. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    The governing equations for a general network are first set up and then reformulated in terms of matrices. This is developed to show that the choice of model for the flow equations is essential for the behavior of the iterative method used to solve the problem. It is shown that it is better...... to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...... demonstrated that this method offers good starting values for a Newton-Raphson iteration....

  17. Determination of geomagnetic archaeomagnitudes from clay pipes

    Science.gov (United States)

    Games, K. P.; Baker, M. E.

    1981-02-01

    Archaeomagnitude determinations of a selection of clay pipes dateable to AD 1645+/-10 as well as studies of pottery samples from the same site and of the same age have been made. Values of the magnitude of the ancient magnetic field (Banc), were obtained from two pottery sherds, two pipe bowls and three pipe stems. The values from the sherds and bowls agree within 2% and compare well with the average value of the magnitude of the magnetic field for the seventeenth century as determined by other archaeomagnetic studies. However, the pipe stems give values of Banc which are significantly less than those from the bowls and pottery. We have not yet been able to explain this and thus we suggest that reliable archaeomagnitude determinations can be made from the bowls of clay pipes but not from the stems. Nevertheless, this result provides a new source of material for investigating variations in the geomagnetic field strength over the past 400 yr. Clay pipes have been manufactured in England since the end of the sixteenth century. In the firing process some pipes were broken and disposed of without ever having been smoked. One such collection, discovered at Rainford, Lancashire, in 1978, consisted of a series of discrete dumps including pipes, kiln debris and a small collection of contemporary used earthenware sherds. The internal consideration of the dumps suggested a very short period of activity and archaeologists (P. Davey, personal communication) ascribe all the material to the period 1645+/-10 yr. With such well-dated material, we set out to check whether or not reliable archaeomagnitudes could be obtained from the pipes.

  18. 30 CFR 75.1905-1 - Diesel fuel piping systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Diesel fuel piping systems. 75.1905-1 Section... Diesel fuel piping systems. (a) Diesel fuel piping systems from the surface must be designed and operated... spillage of fuel and that activates an alarm system. (b) All piping, valves and fittings must be—...

  19. 46 CFR 182.720 - Nonmetallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Nonmetallic piping materials. 182.720 Section 182.720... TONS) MACHINERY INSTALLATION Piping Systems § 182.720 Nonmetallic piping materials. (a) Rigid... systems where permitted by paragraph (e) of this section. (c) Nonmetallic piping must not be used...

  20. 46 CFR 119.720 - Nonmetallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonmetallic piping materials. 119.720 Section 119.720 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... Piping Systems § 119.720 Nonmetallic piping materials. Nonmetallic piping materials,...

  1. 46 CFR 58.25-20 - Piping for steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping for steering gear. 58.25-20 Section 58.25-20... MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-20 Piping for steering gear. (a) Pressure piping must... actuating system including the reservoir. The storage tank must be permanently connected by piping so...

  2. 46 CFR 153.294 - Marking of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Marking of piping systems. 153.294 Section 153.294... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.294 Marking of piping systems. (a) Each cargo piping...

  3. 46 CFR 153.280 - Piping system design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping system design. 153.280 Section 153.280 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.280 Piping system design. (a) Each cargo piping system must...

  4. 46 CFR 182.710 - Piping for vital systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping for vital systems. 182.710 Section 182.710... TONS) MACHINERY INSTALLATION Piping Systems § 182.710 Piping for vital systems. (a) Vital systems are... section is a non-vital system. (c) Piping used in a vital system must: (1) Be composed of...

  5. 46 CFR 116.970 - Protection against hot piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Protection against hot piping. 116.970 Section 116.970 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... ARRANGEMENT Rails and Guards § 116.970 Protection against hot piping. Piping, including valves, pipe...

  6. 46 CFR 154.512 - Piping: Thermal isolation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Thermal isolation. 154.512 Section 154.512 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.512 Piping: Thermal isolation. Low temperature piping must...

  7. 46 CFR 182.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 182.730 Section... (UNDER 100 GROSS TONS) MACHINERY INSTALLATION Piping Systems § 182.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1)...

  8. 46 CFR 154.516 - Piping: Hull protection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Hull protection. 154.516 Section 154.516... and Process Piping Systems § 154.516 Piping: Hull protection. A vessel's hull must be protected from...-522), at: (a) Each piping connection dismantled on a routine basis; (b) Cargo discharge and...

  9. 46 CFR 61.15-15 - Other piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Other piping. 61.15-15 Section 61.15-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND INSPECTIONS Periodic Tests of Piping Systems § 61.15-15 Other piping. (a) All other piping systems shall be...

  10. 46 CFR 154.528 - Piping joints: Flange type.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Flange type. 154.528 Section 154.528... and Process Piping Systems § 154.528 Piping joints: Flange type. (a) A flange must be one of the following types: (1) Welding neck. (2) Slip-on. (3) Socket weld. (b) If the piping is designed for...

  11. 46 CFR 153.910 - Cargo piping plan.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping plan. 153.910 Section 153.910 Shipping... Information § 153.910 Cargo piping plan. No person may operate a tankship unless the tankship has a cargo piping plan that: (a) Shows all cargo piping on the tankship; (b) Shows all cargo valving, pumps,...

  12. 46 CFR 154.519 - Piping relief valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo piping system from liquid pressure exceeding the design pressure must discharge into: (1) A cargo...

  13. 46 CFR 56.30-3 - Piping joints (reproduces 110).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping joints (reproduces 110). 56.30-3 Section 56.30-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Selection and Limitations of Piping Joints § 56.30-3 Piping joints (reproduces 110). The type...

  14. 46 CFR 153.292 - Separation of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Separation of piping systems. 153.292 Section 153.292... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.292 Separation of piping systems. Cargo piping systems must...

  15. 46 CFR 119.710 - Piping for vital systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping for vital systems. 119.710 Section 119.710... Piping Systems § 119.710 Piping for vital systems. (a) Vital systems are those systems that are vital to...-vital system. (c) Piping used in a vital system must meet § 56.60 in subchapter F of this...

  16. 46 CFR 154.514 - Piping: Electrical bonding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Electrical bonding. 154.514 Section 154.514 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.514 Piping: Electrical bonding. (a) Cargo tanks or piping that...

  17. 46 CFR 98.25-55 - Cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo piping. 98.25-55 Section 98.25-55 Shipping COAST... Cargo piping. (a) Piping shall be of seamless steel meeting the requirements of § 56.60-1 of subchapter F (Marine Engineering) of this chapter. The piping shall be of not less than Schedule 40...

  18. 46 CFR 154.355 - Bow and stern loading piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Bow and stern loading piping. 154.355 Section 154.355... Arrangements § 154.355 Bow and stern loading piping. (a) Bow and stern loading piping must: (1) Meet § 154.310...; (3) Be clearly marked; (4) Be segregated from the cargo piping by a removable spool piece in...

  19. 49 CFR 192.321 - Installation of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Installation of plastic pipe. 192.321 Section 192... Transmission Lines and Mains § 192.321 Installation of plastic pipe. (a) Plastic pipe must be installed below ground level except as provided by paragraphs (g) and (h) of this section. (b) Plastic pipe that...

  20. 49 CFR 192.121 - Design of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of plastic pipe. 192.121 Section 192.121... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.121 Design of plastic pipe. Subject to the limitations of § 192.123, the design pressure for plastic pipe is determined by either of...

  1. 49 CFR 192.125 - Design of copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of copper pipe. 192.125 Section 192.125... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.125 Design of copper pipe. (a) Copper pipe used in mains must have a minimum wall thickness of 0.065 inches (1.65 millimeters) and must be...

  2. 49 CFR 192.277 - Ductile iron pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Ductile iron pipe. 192.277 Section 192.277 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Ductile iron pipe. (a) Ductile iron pipe may not be joined by threaded joints. (b) Ductile iron pipe may...

  3. 49 CFR 192.105 - Design formula for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design formula for steel pipe. 192.105 Section 192... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.105 Design formula for steel pipe. (a) The design pressure for steel pipe is determined in accordance with the following...

  4. 49 CFR 195.212 - Bending of pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Bending of pipe. 195.212 Section 195.212... PIPELINE Construction § 195.212 Bending of pipe. (a) Pipe must not have a wrinkle bend. (b) Each field bend must comply with the following: (1) A bend must not impair the serviceability of the pipe. (2) Each...

  5. 46 CFR 154.548 - Cargo piping: Flow capacity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping: Flow capacity. 154.548 Section 154.548... and Process Piping Systems § 154.548 Cargo piping: Flow capacity. Piping with an excess flow valve must have a vapor or liquid flow capacity that is greater than the rated closing flow under § 154.546....

  6. 49 CFR 192.275 - Cast iron pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Cast iron pipe. 192.275 Section 192.275... Cast iron pipe. (a) Each caulked bell and spigot joint in cast iron pipe must be sealed with mechanical leak clamps. (b) Each mechanical joint in cast iron pipe must have a gasket made of a...

  7. Heat pipe testing program test plan

    Energy Technology Data Exchange (ETDEWEB)

    Bienert, W.B.

    1980-03-14

    A test plan is given which describes the tests to be conducted on several typical solar receiver heat pipes. The hardware to be used, test fixtures and rationale of the test program are discussed. The program objective is to perform life testing under simulated receiver conditions, and to conduct performance tests with selected heat pipes to further map their performance, particularly with regard to their transient behavior. Performance requirements are defined. Test fixtures designed for the program are described in detail, and their capabilities for simulating the receiver conditions and their limitations are discussed. The heat pipe design is given. (LEW)

  8. Fatigue analysis of aluminum drill pipes

    Directory of Open Access Journals (Sweden)

    João Carlos Ribeiro Plácido

    2005-12-01

    Full Text Available An experimental program was performed to investigate the fundamental fatigue mechanisms of aluminum drill pipes. Initially, the fatigue properties were determined through small-scale tests performed in an optic-mechanical fatigue apparatus. Additionally, full-scale fatigue tests were carried out with three aluminum drill pipe specimens under combined loading of cyclic bending and constant axial tension. Finally, a finite element model was developed to simulate the stress field along the aluminum drill pipe during the fatigue tests and to estimate the stress concentration factors inside the tool joints. By this way, it was possible to estimate the stress values in regions not monitored during the fatigue tests.

  9. Gas lensing in a heated spinning pipe

    CSIR Research Space (South Africa)

    Mafusire, C

    2006-07-01

    Full Text Available Spinning Pipe C MAFUSIRE1,2, A FORBES2, G SNEDDEN3, C MAHLASE3, MM MICHAELIS4 & M MATHUTHU1 1University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe 2CSIR National Laser Centre, PO Box 395, Pretoria 0001, South Africa 3CSIR Defence Peace Safety... this system. BEAM PROPAGATION THROUGH GAS LENSES The heated spinning pipe acts as a GRIN lens where the refractive index variation inside the pipe is given by The variable parameters of the gas lens in this work were the rotation...

  10. Investigation on Mechanical Property of Seamless Pipe

    Institute of Scientific and Technical Information of China (English)

    ZHAO Li-ming; YANG Xiao-yong; LIU Ye

    2004-01-01

    The mechanical properties of the steel pipe rolled with continuously casting round billet after determining the chemical composition in steel were studied. The results show that the total reduction ratio should be higher than 5.2 when the line pipes of grade B, grade 20 and other general seamless pipe were rolled with continuously casting round billet. And the total reduction ratio should be higher than 10.2 and the grain size should be controlled more than grade 7 for casing of oil countryside tubular goods (OCTG).

  11. Arterial gas occlusions in operating heat pipes

    Science.gov (United States)

    Saaski, E. W.

    1975-01-01

    The effect of noncondensable gases on high performance arterial heat pipes has been investigated both analytically and experimentally. Models have been generated which characterize the dissolution of gases in condensate and the diffusional loss of dissolved gases from condensate in arterial flow. These processes, and others, have been used to postulate stability criteria for arterial heat pipes. Experimental observations of gas occlusions were made using a stainless steel heat pipe equipped with viewing ports, and the working fluids methanol and ammonia with the gas additives helium, argon, and xenon. Observations were related to gas transport models.

  12. Heat pipes theory, design and applications

    CERN Document Server

    Reay, David; Kew, Peter

    2013-01-01

    Heat Pipes, 6th Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students. This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all informat

  13. Characterization of radioactive contamination inside pipes with the Pipe Explorer{sup trademark} system

    Energy Technology Data Exchange (ETDEWEB)

    Cremer, C.D.; Lowry, W.; Cramer, E. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)] [and others

    1995-10-01

    The U.S. Department of Energy`s nuclear facility decommissioning program needs to characterize radiological contamination inside piping systems before the pipe can be recycled, remediated, or disposed. Historically, this has been attempted using hand held survey instrumentation, surveying only the accessible exterior portions of pipe systems. Difficulty, or inability of measuring threshold surface contamination values, worker exposure, and physical access constraints have limited the effectiveness of this approach. Science and Engineering associates, Inc. under contract with the DOE Morgantown Energy Technology Center has developed and demonstrated the Pipe Explorer{trademark} system, which uses an inverting membrane to transport various characterization sensors into pipes. The basic process involves inverting (turning inside out) a tubular impermeable membrane under air pressure. A characterization sensor is towed down the interior of the pipe by the membrane.

  14. Reliability of piping system components. Volume 4: The pipe failure event database

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, R.; Erixon, S. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Tomic, B. [ENCONET Consulting GmbH, Vienna (Austria); Lydell, B. [RSA Technologies, Visat, CA (United States)

    1996-07-01

    Available public and proprietary databases on piping system failures were searched for relevant information. Using a relational database to identify groupings of piping failure modes and failure mechanisms, together with insights from published PSAs, the project team determined why, how and where piping systems fail. This report represents a compendium of technical issues important to the analysis of pipe failure events, and statistical estimation of failure rates. Inadequacies of traditional PSA methodology are addressed, with directions for PSA methodology enhancements. A `data driven and systems oriented` analysis approach is proposed to enable assignment of unique identities to risk-significant piping system component failure. Sufficient operating experience does exist to generate quality data on piping failures. Passive component failures should be addressed by today`s PSAs to allow for aging analysis and effective, on-line risk management. 42 refs, 25 figs.

  15. Coolant choice for the central beryllium pipe of the BESIII beam pipe

    Science.gov (United States)

    Zheng, Li-Fang; Wang, Li; Wu, Ping; Ji, Quan; Li, Xun-Feng; Liu, Jian-Ping

    2010-07-01

    In order to take away much more heat on the BESIII beam pipe to guarantee the normal particle detection, EDM-1 (oil No.1 for electric discharge machining), with good thermal and flow properties was selected as the candidate coolant for the central beryllium pipe of the BESIII beam pipe. Its cooling character was studied and dynamic corrosion experiment was undertaken to examine its corrosion on beryllium. The experiment results show that EDM-1 would corrode the beryllium 19.9 μm in the depth in 10 years, which is weak and can be neglected. Finite element simulation and experiment research were taken to check the cooling capacity of EDM-1. The results show that EDM-1 can meet the cooling requirement of the central beryllium pipe. Now EDM-1 is being used to cool the central beryllium pipe of the BESIII beam pipe.

  16. Alpha detection in pipes using an inverting membrane scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick, D.T.; Cremer, C.D.; Lowry, W. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)] [and others

    1995-10-01

    Characterization of surface alpha emitting contamination inside enclosed spaces such as piping systems presents an interesting radiological measurement challenge. Detection of these alpha particles from the exterior of the pipe is impossible since the alpha particles are completely absorbed by the pipe wall. Traditional survey techniques, using hand-held instruments, simply can not be used effectively inside pipes. Science and Engineering Associates, Inc. is currently developing an enhancement to its Pipe Explorer{trademark} system that will address this challenge. The Pipe Explorer{trademark} uses a unique sensor deployment method where an inverted tubular membrane is propagated through complex pipe runs via air pressure. The inversion process causes the membrane to fold out against the pipe wall, such that no part of the membrane drags along the pipe wall. This deployment methodology has been successfully demonstrated at several DOE sites to transport specially designed beta and gamma, scintillation detectors into pipes ranging in length up to 250 ft.

  17. Pressure Change in Tee Branch Pipe in Oscillatory Flow

    Directory of Open Access Journals (Sweden)

    Daisuke Sakamoto

    2013-01-01

    Full Text Available The purpose of this paper is to contribute to the understanding of unsteady flow of branch pipes in pneumatic systems. Branch pipes are used in pneumatic pipe systems in various industrial fields. To predict the unsteady pressure changes in the pneumatic piping systems, it is necessary that the dynamic characteristics of branch pipes are at hand, in addition to the dynamic characteristic of single pipe. However, while so many studies are accumulated for a single pipe dynamics, few studies have reported the pressure changes in branch pipes due to oscillatory flow. This paper reports an experimental study on the dynamic characteristics of the pressure change in a pneumatic branch pipe under given oscillatory flow. The paper also proposes a simulation method to predict the pressure changes in a pneumatic branch pipe under oscillatory flow. The validity of simulation is verified for oscillatory flows up to 5 Hz, comparing with the experimental results.

  18. Visualization of working fluid flow in gravity assisted heat pipe

    OpenAIRE

    Nemec Patrik; Malcho Milan

    2015-01-01

    Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fl...

  19. Optimizing the Pipe Diameter of the Pipe Belt Conveyor Based on Discrete Element Method

    Science.gov (United States)

    Guo, Yong-cun; Wang, Shuang; Hu, Kun; Li, De-yong

    2016-03-01

    In order to increase the transport volume of the pipe belt conveyor and reduce lateral pressure of the supporting roller set, this study aims to optimize the pipe diameter of the pipe belt conveyor. A mechanical model of the pipe belt conveyor with six supporting roller sets in the belt bearing section was built based on the infinitesimal method, and the formula for calculating the lateral pressure of each supporting roller was deduced on the basis of reasonable assumption. Simulated analysis was carried out on the operation process of the pipe belt conveyor by using the discrete element method. The result showed that, when the other conditions were certain, as the pipe diameter increased, the average lateral pressure of the supporting roller set increased, with a gradually decreasing increment, which was consistent with the calculated result of the theoretical formula. An optimized pipe diameter under the current conditions was obtained by fitting the curve of the formula for calculating the transport volume of the pipe belt conveyor and its simulation curve. It provided a certain reference value for improving the transport efficiency and prolonging the service life of the pipe belt conveyor.

  20. Multi-leg heat pipe evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A. (Inventor)

    1986-01-01

    A multileg heat pipe evaporator facilitates the use and application of a monogroove heat pipe by providing an evaporation section which is compact in area and structurally more compatible with certain heat exchangers or heat input apparatus. The evaporation section of a monogroove heat pipe is formed by a series of parallel legs having a liquid and a vapor channel and a communicating capillary slot therebetween. The liquid and vapor channels and interconnecting capillary slots of the evaporating section are connected to the condensing section of the heat pipe by a manifold connecting liquid and vapor channels of the parallel evaporation section legs with the corresponding liquid and vapor channels of the condensing section.

  1. Reliability Estimation for Double Containment Piping

    Energy Technology Data Exchange (ETDEWEB)

    L. Cadwallader; T. Pinna

    2012-08-01

    Double walled or double containment piping is considered for use in the ITER international project and other next-generation fusion device designs to provide an extra barrier for tritium gas and other radioactive materials. The extra barrier improves confinement of these materials and enhances safety of the facility. This paper describes some of the design challenges in designing double containment piping systems. There is also a brief review of a few operating experiences of double walled piping used with hazardous chemicals in different industries. This paper recommends approaches for the reliability analyst to use to quantify leakage from a double containment piping system in conceptual and more advanced designs. The paper also cites quantitative data that can be used to support such reliability analyses.

  2. 75 FR 8113 - Drill Pipe From China

    Science.gov (United States)

    2010-02-23

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Drill Pipe From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject antidumping and countervailing duty investigations. DATES: Effective...

  3. Titanium Heat Pipe Thermal Plane Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thermacore Inc. proposes an innovative titanium heat pipe thermal plane for passive thermal control of individual cells within a fuel cell stack. The proposed...

  4. Titanium Heat Pipe Thermal Plane Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the Phase II program is to complete the development of the titanium heat pipe thermal plane and establish all necessary steps for production of this...

  5. Heat transfer, thermal control, and heat pipes

    Science.gov (United States)

    Olstad, W. B.

    1980-01-01

    This volume provides information on recent progress in spacecraft thermal control and the supporting disciplines of conduction, thermal radiation, and heat pipe theory and application. Four problem areas are considered: conduction heat transfer, radiation heat transfer, thermal control, and heat pipes. The topics covered include finite-element methodology for transient conduction/forced-convection thermal analysis; effects of surface finish on thermal contact resistance between different materials; mathematical models for wide-band nongray gas radiation in spherical and cylindrical geometries; thermal design, analysis and testing of the Shuttle remote manipulator arm; porous heat pipe; and transient behavior of liquid trap heat-pipe thermal diodes. Also discussed is the thermal design concept for a high-resolution UV spectrometer.

  6. Rhode Island Piping Plover Restoration Project 2002

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The recovery plan for Piping Plover on Rhode Island discusses the current status of the species, habitat requirements and limiting factors, recovery objectives and...

  7. High Energy Vibration for Gas Piping

    Science.gov (United States)

    Lee, Gary Y. H.; Chan, K. B.; Lee, Aylwin Y. S.; Jia, ShengXiang

    2017-07-01

    In September 2016, a gas compressor in offshore Sarawak has its rotor changed out. Prior to this change-out, pipe vibration study was carried-out by the project team to evaluate any potential high energy pipe vibration problems at the compressor’s existing relief valve downstream pipes due to process condition changes after rotor change out. This paper covers high frequency acoustic excitation (HFAE) vibration also known as acoustic induced vibration (AIV) study and discusses detailed methodologies as a companion to the Energy Institute Guidelines for the avoidance of vibration induced fatigue failure, which is a common industry practice to assess and mitigate for AIV induced fatigue failure. Such detailed theoretical studies can help to minimize or totally avoid physical pipe modification, leading to reduce offshore plant shutdown days to plant shutdowns only being required to accommodate gas compressor upgrades, reducing cost without compromising process safety.

  8. Heat pipes made of roll bond panels

    Science.gov (United States)

    Moeller, M.; Heil, K.

    1983-06-01

    The use of large surfaced aluminum roll bond panels with an integral flow system as heat pipes is studied. With a suitable flow system e.g., parallel passages with a cross-connection, one single filling procedure is required for the operating medium. Adequate materials for the manufacture of heat pipes are Al 99,3; AlMn1, 5 and AlMn1, 5Sil,5. Peel, creep and burst tests as well as corrosion tests were made on specimens and structural elements of these materials. Results show that the use of such panels for heat pipe manufacturing is appropriate for limited maximum temperature applications. Prototypes of heat pipes and their characteristic features are described in view of their use as absorbers in solar collectors. Good heat exchange performances obtained.

  9. Acoustics of two-phase pipe flows

    OpenAIRE

    Dijk, van, Nico M.

    2005-01-01

    Acoustic signals that are recorded in oil pipelines contain information about the flow. In order to extract this information from the pressure recordings, detailed knowledge about the transmission properties of sound waves in the pipes is required.

  10. Jet pump assisted arterial heat pipe

    Science.gov (United States)

    Bienert, W. B.; Ducao, A. S.; Trimmer, D. S.

    1978-01-01

    This paper discusses the concept of an arterial heat pipe with a capillary driven jet pump. The jet pump generates a suction which pumps vapor and noncondensible gas from the artery. The suction also forces liquid into the artery and maintains it in a primed condition. A theoretical model was developed which predicts the existence of two stable ranges. Up to a certain tilt the artery will prime by itself once a heat load is applied to the heat pipe. At higher tilts, the jet pump can maintain the artery in a primed condition but self-priming is not possible. A prototype heat pipe was tested which self-primed up to a tilt of 1.9 cm, with a heat load of 500 watts. The heat pipe continued to prime reliably when operated as a VCHP, i.e., after a large amount of noncondensible gas was introduced.

  11. Multi-leg heat pipe evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-04-01

    A multileg heat pipe evaporator facilitates the use and application of a monogroove heat pipe by providing an evaporation section which is compact in area and structurally more compatible with certain heat exchangers or heat input apparatus. The evaporation section of a monogroove heat pipe is formed by a series of parallel legs having a liquid and a vapor channel and a communicating capillary slot therebetween. The liquid and vapor channels and interconnecting capillary slots of the evaporating section are connected to the condensing section of the heat pipe by a manifold connecting liquid and vapor channels of the parallel evaporation section legs with the corresponding liquid and vapor channels of the condensing section.

  12. Additive Manufacturing of Heat Pipe Wicks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wick properties are often the limiting factor in a heat pipe design. Current technology uses conventional sintering of metal powders, screen wick, or grooves to...

  13. North Dakota Piping Plover Survey : 1992

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Packet of information on conducting piping plover surveys in North Dakota for 1992. These surveys are part of a cooperative effort with other resource agencies and...

  14. Heat Pipe Technology: A bibliography with abstracts

    Science.gov (United States)

    1974-01-01

    This bibliography lists 149 references with abstracts and 47 patents dealing with applications of heat pipe technology. Topics covered include: heat exchangers for heat recovery; electrical and electronic equipment cooling; temperature control of spacecraft; cryosurgery; cryogenic, cooling; nuclear reactor heat transfer; solar collectors; laser mirror cooling; laser vapor cavitites; cooling of permafrost; snow melting; thermal diodes variable conductance; artery gas venting; and venting; and gravity assisted pipes.

  15. Cooling Acoustic Transcucer with Heat Pipes

    Science.gov (United States)

    2009-07-19

    pipes. [0013] Most transducer packages involve a stack of active ceramic. A Tonpilz transducer 10 in the prior art, as depicted in FIG. 1...identical or corresponding parts throughout the several views and wherein: [0023] FIG. 1 is a prior art depiction of a Tonpilz transducer design...Distribution is unlimited 20090916027 Attorney Docket No. 97001 COOLING ACOUSTIC TRANSDUCER WITH HEAT PIPES STATEMENT OF GOVERNMENT INTEREST [0001

  16. Fire Endurance Testing of Fiberglass Piping

    Science.gov (United States)

    1992-04-01

    explosion . A computer data acquisition system was used to record the various channels of test data. Color video cameras, an infrared camera, and 35 mm...sample included a bolted flanged coupling. One of the copper-nickel samples had a brazed sleeve-type coupling and the other had a Staub mechanical...FGP of the types tested. Pipe deflections were within IACS limits. 8. An explosion hazard exists when sealed pipe samples are exposed to fire. If the

  17. IMPROVEMENT OF FLUID PIPE LUMPED PARAMETER MODEL

    Institute of Scientific and Technical Information of China (English)

    Kong Xiaowu; Wei Jianhua; Qiu Minxiu; Wu Genmao

    2004-01-01

    The traditional lumped parameter model of fluid pipe is introduced and its drawbacks are pointed out.Furthermore, two suggestions are put forward to remove these drawbacks.Firstly, the structure of equivalent circuit is modified, and then the evaluation of equivalent fluid resistance is change to take the frequency-dependent friction into account.Both simulation and experiment prove that this model is precise to characterize the dynamic behaviors of fluid in pipe.

  18. Development of bore tools for pipe welding and cutting

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Kiyoshi; Ito, Akira; Takiguchi, Yuji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    In the International Thermonuclear Experimental Reactor (ITER), in-vessel components replacement and maintenance requires that connected cooling pipes be cut and removed beforehand and that new components be installed to which cooling pipes must be rewelded. All welding must be inspected for soundness after completion. These tasks require a new task concept for ensuring shielded areas and access from narrow ports. Thus, it became necessary to develop autonomous locomotion welding and cutting tools for branch and main pipes to weld pipes by in-pipe access; a system was proposed that cut and welded branch and main pipes after passing inside pipe curves, and elemental technologies developed. This paper introduces current development in tools for welding and cutting branch pipes and other tools for welding and cutting the main pipe. (author)

  19. Effect of Geopolymer filler in Glass Reinforced Epoxy (GRE) Pipe for Piping Application: Mechanical Properties

    Science.gov (United States)

    Firdaus Abu Hashim, Mohammad; Bakri Abdullah, Mohd Mustafa Al; Mohd Ruzaidi Ghazali, Che; Hussin, Kamarudin; Binhussain, Mohammed

    2016-06-01

    The present work is aimed to carry out the effect of geopolymer material which is fly ash as filler in the glass reinforced epoxy pipe on the micro structure of fly ash geopolymer, compression properties, and bulk density using the filament winding method. Conventional glass reinforced epoxy pipes has its own disadvantages such as high corrosion resistance at acidic environment and low strength which can be replaced by the composite pipes. Geopolymer is a type of amorphous alumino-silicate and can be synthesized by geopolymerization process. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled with 10 - 40 weight percentage geopolymer filler which is fly ash with 4 Molarity were prepared. Morphology of the raw material fly ash and fly ash based-geopolymer surface was characterized using scanning electron microscopy. It was found that the additions of fly ash at the beginning with 10 wt% are showing higher compressive strength than glass reinforced epoxy pipe without fly ash geopolymer filler. The compressive test of these series of samples was determined using Instron Universal Testing under compression mode. It was found that compressive strength for samples fly ash based-geopolymer filler are higher as compared to glass reinforced epoxy pipe without geopolymer filler. However, the compressive strength of glass reinforced epoxy pipe with fly ash geopolymer filler continues to decline when added to 20 wt% - 40 wt% of geopolymer filler loading. The results showed that the mixing of geopolymer materials in epoxy system can be obtained in this study.

  20. Effect of Glass Reinforced Epoxy (GRE pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    Directory of Open Access Journals (Sweden)

    Abu Hashim Mohammad Firdaus

    2016-01-01

    Full Text Available The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled with 10 – 40 weight percentage geopolymer filler which is white clay were prepared. The compression strength of the glass reinforced epoxy pipe filled geopolymer materials is determined using Instron Universal Testing under compression mode. It was found that compressive strength for samples with white clay geopolymer filler are much higher compare to glass reinforced epoxy pipe without geopolymer filler. Moreover, the compressive strength of glass reinforced epoxy pipe filled with white clay geopolymer filler was increased from 10 wt% to 30 wt% of geopolymer content. However, the compressive strength of glass reinforced epoxy pipe with white clay geopolymer filler suddenly decreased when added to 40 wt%. The results indicated that the blending of geopolymer materials in epoxy system can be obtained in this study.

  1. Instrumented failure of hillslope models with soil-pipes

    Science.gov (United States)

    Sharma, Raj H.; Konietzky, Heinz

    2011-07-01

    Soil-pipes (porous pipes inside a hillslope) are often detected in collapsed slopes indicating their influence on slope failure processes. Only limited studies can be found regarding the impacts of soil-pipes on landslide mechanisms. Hillslope models prepared in a flume are experimented with different soil-pipe configurations: a) no pipe, b) closed pipe and c) open pipe. Pore-water pressures were measured at six different locations along a slope. Discharges at the outlet of soil-pipe and groundwater seepage were also recorded. For the above mentioned pipe configurations two types of experiments were conducted: a) rainfall-induced failure and b) seepage-induced failure. Experimental results show that a closed pipe accumulates water around its lower end and continuously increases pore-water pressure till a failure. An open pipe works as a means of hillslope drainage and reduces the pore-water pressure of an entire slope. However, if open pipe is blocked, pore-water pressure close to its lower end rises rapidly, leading to immediate soil mass movement. For both seepage and rainfall-induced failure experiments, the maximum pressure before the failure was larger at a slope with an open pipe (once it is closed) than a slope with a pipe closed from the beginning or that without a soil-pipe. This indicates that the blockage of soil-pipes makes a slope more susceptible to failure. Displacement vectors show that soil movement velocity close to the surface was highest at slopes with open pipes after closure and lowest at slopes without pipes because of a higher degree of saturation and pore-water pressure at the time of failure of the former. Before a large failure, small fluctuations in pore-water pressure were also observed which can be an indicator of impending failure.

  2. Hookah pipe smoking among health sciences students.

    Science.gov (United States)

    van der Merwe, N; Banoobhai, T; Gqweta, A; Gwala, A; Masiea, T; Misra, M; Zweigenthal, V

    2013-09-30

    Hookah pipe smoking is a social practice and has gained popularity, especially among South African youth. The extent of this practice among health sciences students, and their knowledge regarding the health risks, are unknown. This is important, as these students will become future health professionals possibly influencing the practice of individuals and communities. To explore the knowledge, attitudes and practices of hookah pipe smoking among students at the Faculty of Health Sciences, University of Cape Town. METHODS. A cross-sectional study was conducted among undergraduate and postgraduate students. A self-administered questionnaire was distributed as a hard copy and online survey. Of 228 participants, 66% had smoked a hookah pipe before, with 18% still smoking. Most began smoking in high school, with 25% initiating at university. Of the current smokers, 65% smoked occasionally socially, commonly at friends' houses for 30 - 60 min/session. A further 11% smoked cigarettes concurrently and 30% added other substances, mainly cannabis, to pipes. Most current hookah smokers had no interest in quitting (84%). Only 30% of participants had prior health information about hookah pipe smoking. Most knew that it was harmful (91%), with many not knowing why. A total of 80% of participants perceived that the practice was socially acceptable and 84% would recommend it to others.CONCLUSION; The poor knowledge about the dangers of hookah pipe smoking and the extent of its practice among health sciences students is alarming. These findings highlight the need for school and university health promotion campaigns, and for better regulation of hookah pipe smoking.

  3. Round dance in pipes; Runddans i roer

    Energy Technology Data Exchange (ETDEWEB)

    Steensen, Anders J.

    2004-07-01

    On the offshore production plants, oil, water, and gas are separated from the well streams. The oil is sold on the market while the gas is in part exported, in part reinjected into the wells in large quantities to sustain the pressure in the reservoirs. The water is cleaned, some is pumped to the sea and some returned to the reservoir. Although these processes may seem straightforward, they cause a great deal of worry since there are so many complex processing and pipe systems taking up space. Pipes vibrate and make noise, most often because of pressure fluctuations created by the flowing liquid and gas. Or vortices form inside the pipe that make the whole pipe drone. In the offshore activities, these phenomena can be very annoying; on the Statfjord B platform people baulked at entering the area where the produced water treatment system was standing. A new system had to be developed since existing equipment would take up too much space. In the new system, a pipe section is installed in the pipeline that makes the gas/liquid mixture spin rapidly as in a centrifuge. The gas collects along the centre of the pipe and is tapped off. The principle can also be used to separate liquid from gas. In many gas treatment systems, liquid accumulation, or carry over, is detrimental. But gas dehydrators are usually dimensioned for a minimal content of liquid in the gas. Important features of these new pipe-based separators are that they are small, remove bottlenecks in the production, and are straightforward to install. But operators who live with the problems every day are very sceptical about the new separators and should be given the opportunity to test them on land before they are installed in the field.

  4. Multiple blowdown pipe experiments with the PPOOLEX facility

    Energy Technology Data Exchange (ETDEWEB)

    Puustinen, M.; Laine, J.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-03-15

    This report summarizes the results of the experiments with two steel blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through the blowdown pipes to the condensation pool. The main purpose of the experiment series was to study chugging phenomena (rapid condensation) while steam is discharged through two parallel blowdown pipes into the condensation pool filled with sub-cooled water. Particularly, the aim was to study if the pipe material (polycarbonate) used in the earlier experiment series with two blowdown pipes has had an effect on the general chugging behaviour and measured loads. In the experiments the initial temperature of the pool water was 20 deg. C. The steam flow rate ranged from 220 g/s to 2 350 g/s and the temperature of incoming steam from 148 deg. C to 207 deg. C. The formation and collapse of steam bubbles and the movement of the steam/water interface inside the pipes was non-synchronous. There could be even a 70 ms time difference between the occurrences of steam bubble collapses at the outlets of the two pipes. There was no clear pattern in which pipe the steam bubble first starts to collapse. Several successive bubbles could collapse first in either pipe but then the order changed for a single or several cycles. High pressure loads were measured inside the blowdown pipes due to rapid condensation of the steam volumes in the pipes and resulting water hammer effects. The loads seemed to be higher in pipe 1 than in pipe 2. An explanation for this could be a possible unequal distribution of steam flow between the two pipes. The pipe material has an effect on the condensation phenomena inside the blowdown pipes. A huge difference in the measured pressure curves inside the pipes could be observed compared to the experiments with the polycarbonate pipes. With the same test conditions the amplitude of the

  5. Visualization of working fluid flow in gravity assisted heat pipe

    Directory of Open Access Journals (Sweden)

    Nemec Patrik

    2015-01-01

    Full Text Available Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fluid boiling, nucleation of bubbles, vapor flow, vapor condensation on the wall, vapor and condensate flow interaction, flow down condensate film thickness on the wall, occurred during the heat pipe operation.

  6. Visualization of working fluid flow in gravity assisted heat pipe

    Science.gov (United States)

    Nemec, Patrik; Malcho, Milan

    2015-05-01

    Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fluid boiling, nucleation of bubbles, vapor flow, vapor condensation on the wall, vapor and condensate flow interaction, flow down condensate film thickness on the wall, occurred during the heat pipe operation.

  7. Performance characteristic of thermosyphon heat pipe at radiant heat source

    Science.gov (United States)

    Hrabovský, Peter; Papučík, Štefan; Kaduchová, Katarína

    2016-06-01

    This article discusses about device, which is called heat pipe. This device is with heat source with radiant heat source. Heat pipe is device with high efficiency of heat transfer. The heat pipe, which is describe in this article is termosyphon heat pipe. The experiment with termosyphon heat pipe get a result. On the base of result, it will be in future to create mathematical model in Ansys. Thermosyphon heat pipe is made of copper and distilled water is working fluid. The significance of this experiment consists in getting of the heat transfer and performance characteristic. On the basis of measured and calculated data can be constructed the plots.

  8. LAMINAR FLUID FLOW IN HELICAL ELLIPTICAL PIPE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, using an orthogonal curvilinear coordinate system and solving the complete N-S equations, we analyzed the flow in a helical elliptical duct by the perturbation method. The first-order solutions of the stream function Ψ, axial velocity w and the velocity of secondary flow (u, v) were obtained. The effects of torsion, curvature and the axial pressure gradient on the secondary flow were discussed in detail. The study indicates that the torsion has first-order effect on the secondary flow in a helical elliptical pipe, the secondary flow is dominated by torsion when the axial pressure gradient is small and for increasing gradient the secondary flow is eventually dominated by the effect due to curvature. The fact that the torsion has no effect on fluid flow in a helical pipe with a circular cross section was also confirmed. The most important conclusion is that the flow in a helical elliptical pipe to the first-order can be obtained as a combination of the flow in a toroidal pipe and the flow in a twisted pipe.

  9. GTRAN- TRANSIENT ANALYSIS OF GAS PIPING SYSTEMS

    Science.gov (United States)

    TROVILLION T A

    1994-01-01

    The GTRAN program was developed to solve transient, as well as steady state, problems for gas piping systems. GTRAN capabilities allow for the analysis of a variety of system configurations and components. These include: multiple pipe junctions; valves that change position with time; fixed restrictions (orifices, manual valves, filters, etc.); relief valves; constant pressure sources; and heat transfer for insulated piping and piping subjected to free or forced convection. In addition, boundary conditions can be incorporated to simulate specific components. The governing equations of GTRAN are the one-dimensional transient gas dynamic equations. The three equations for pressure, velocity, and density are reduced to numerical equations using an implicit Crank-Nicholson finite difference technique. Input to GTRAN includes a description of the piping network, the initial conditions, and any events (e.g. valve closings) occuring during the period of analysis. Output includes pressure, velocity, and density versus time. GTRAN is written in FORTRAN 77 for batch execution and has been implemented on a DEC VAX series computer. GTRAN was developed in 1983.

  10. Drag reduction properties of superhydrophobic mesh pipes

    Science.gov (United States)

    Geraldi, Nicasio R.; Dodd, Linzi E.; Xu, Ben B.; Wells, Gary G.; Wood, David; Newton, Michael I.; McHale, Glen

    2017-09-01

    Even with the recent extensive study into superhydrophobic surfaces, the fabrication of such surfaces on the inside walls of a pipe remains challenging. In this work we report a convenient bi-layered pipe design using a thin superhydrophobic metallic mesh formed into a tube, supported inside another pipe. A flow system was constructed to test the fabricated bi-layer pipeline, which allowed for different constant flow rates of water to be passed through the pipe, whilst the differential pressure was measured, from which the drag coefficient (ƒ) and Reynolds numbers (Re) were calculated. Expected values of ƒ were found for smooth glass pipes for the Reynolds number (Re) range 750-10 000, in both the laminar and part of the turbulent regimes. Flow through plain meshes without the superhydrophobic coating were also measured over a similar range (750  superhydrophobic coating, ƒ was found for 4000  superhydrophobic mesh can support a plastron and provide a drag reduction compared to a plain mesh, however, the plastron is progressively destroyed with use and in particular at higher flow rates.

  11. Characterizing the Performance of Pipe Bombs.

    Science.gov (United States)

    Oxley, Jimmie C; Smith, James L; Bernier, Evan T; Sandstrom, Fredrick; Weiss, Gregory G; Recht, Gunther W; Schatzer, David

    2017-05-24

    Pipe bombs of steel or PVC fragment in reproducible patterns when similarly configured. The power of the explosion correlates with number, mass, and size of the fragments recovered, where a large number of small, low-mass fragments indicate a high-power event and vice versa. In discussing performance, describing pipe fragmentation pattern by fragment weight distribution mapping (FWDM) or fragment surface area distribution mapping (FSADM) was useful. When fillers detonated, detonation velocities of ~4.4 mm/μs were measured. In such cases, side walls of the pipe were thrown first; the average fragment velocity was ~1000 km/s. In deflagrations, the end cap was first thrown; fragment velocities were only ~240 km/s. Blast overpressures varied; at 10 feet, 2 × 12 inch steel pipes containing ~550 g of detonable mixture produced overpressures of 5-6 psi; similar nondetonating pipes produced less than 2 psi. Maximum fragment throw distances were 250-300 m, with an average of ~100 m. © 2017 American Academy of Forensic Sciences.

  12. A study on the transient piping vibration of power plant. Secondary piping system of Wolsung 1 unit

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun; Kim, Yeon Whan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

    1996-08-01

    In order to maintain a safe operation and availability of generating facilities, qualitative and quantitative assessment of piping vibration was performed vibration sources and damages of piping support was identified on the second piping system of Wolsung nuclear power plant unit 1 .Inspected piping supports and structures in both hot and cold condition .Established evaluation procedures of piping vibration .Performed the static analysis of 2 nd piping system .Established optimal vibration reducing method .The measured vibration level after installing rigid supports and energy absorbing type restraint was reduced about 7 times in velocity unit (author). 24 refs., 95 figs.

  13. Key results for the NRC`s Short Cracks in Piping and Piping Welds Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Krishnaswamy, P.; Brust, F. [Battelle, Columbus, OH (United States)] [and others

    1995-04-01

    The overall objective of the Short Cracks in Piping and Piping Welds Program is to verify and improve engineering analyses to predict the fracture behavior of circumferentially cracked pipe under quasi-static loading with particular attention to crack lengths typically used in LBB or flaw evaluation criteria. The USNCRC program at Battelle was initiated in March 1990 and is scheduled to be completed in December 1994. This paper discusses key results from the overall program with particular emphasis on the efforts since the last WRSIM meeting. The program consists of eight technical tasks as listed below: task 1 short through-wall-cracked (TWC) pipe evaluations; task 2 short surface-cracked (SC) pipe evaluations; task 3 bi-metallic weld crack evaluations; task 4 dynamic strain aging and crack instabilities; task 5 fracture evaluations of anisotropic pipe; task 6 crack-opening-area evaluations; task 7 NRCPIPE code improvements; task 8 additional efforts. Task 8 is a collection of new efforts initiated during the coarse of the program. A list of the full-scale pipe experiments in this program is given in Table 1. All of the experiments have been completed. The most recent accomplishments in each of the tasks listed above are discussed below. The details of all the results in the eight tasks are published in the semiannual reports as well as topical reports from the program.

  14. THE FLOW IN ROTATING CURVED CIRCULAR PIPE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The combined effects of the system rotation (Coriolis force) and curvature (centrifugal force) on the flow in rotating curved circular pipe with small curvature are examined by perturbation method. A second-order perturbation solution is presented. The secondary flow structure and the primary axial velocity distributions are studied in detail. The loops of the secondary flow are more complex than those in a curved pipe without rotation or a rotating straight pipe. Its numbers depend on the body force ratio F which represents the ratio of the Coriolis to the centrifugal force. The maximum of the axial velocity is pushed to either outer bend or inner bend, which is also determined by F. The results are confirmed by the results of other authors who studied the same problem by different methods.

  15. Evaluation of flawed piping under dynamic loading

    Energy Technology Data Exchange (ETDEWEB)

    Nickell, R.E. (Applied Science and Technology, Inc., Poway, CA (United States)); Quinones, D.F. (Cloud (Robert L.) and Associates, Inc., Berkeley, CA (United States)); Gilman, J.D. (Electric Power Research Inst., Palo Alto, CA (United States))

    1992-10-01

    This report describes analytical and interpretative research on results of large-scale dynamic tests of flawed pipe which were conducted for the International Piping Integrity Research Group (IPIRG). Here, the adequacy of dynamic analysis methods is examined, as well as margins against failure associated with flaw evaluation criteria. Experimental and analytical results are related to requirements of the American Society of Mechanical Engineers Boiler and Pressure Vessel Codes. Code limits of operability bound all test results. Guidance is offered on selection of Z-factors'' for austenitic materials to retain code safety margins. In the IPIRG tests, efforts to produce a nearly instantaneous full severance pipe break were unsuccessful, indicating that this hypothetical basis for plant accident evaluations is conservative.

  16. Development of solutions to benchmark piping problems

    Energy Technology Data Exchange (ETDEWEB)

    Reich, M; Chang, T Y; Prachuktam, S; Hartzman, M

    1977-12-01

    Benchmark problems and their solutions are presented. The problems consist in calculating the static and dynamic response of selected piping structures subjected to a variety of loading conditions. The structures range from simple pipe geometries to a representative full scale primary nuclear piping system, which includes the various components and their supports. These structures are assumed to behave in a linear elastic fashion only, i.e., they experience small deformations and small displacements with no existing gaps, and remain elastic through their entire response. The solutions were obtained by using the program EPIPE, which is a modification of the widely available program SAP IV. A brief outline of the theoretical background of this program and its verification is also included.

  17. Numerical simulation of centrifugal casting of pipes

    Science.gov (United States)

    Kaschnitz, E.

    2012-07-01

    A numerical simulation model for the horizontal centrifugal pipe casting process was developed with the commercial simulation package Flow3D. It considers - additionally to mass, energy and momentum conservation equations and free surface tracking - the fast radial and slower horizontal movement of the mold. The iron inflow is not steady state but time dependent. Of special importance is the friction between the liquid and the mold in connection with the viscosity and turbulence of the iron. Experiments with the mold at controlled revolution speeds were carried out using a high-speed camera. From these experiments friction coefficients for the description of the interaction between mold and melt were obtained. With the simulation model, the influence of typical process parameters (e.g. melts inflow, mold movement, melt temperature, cooling media) on the wall thickness of the pipes can be studied. The comparison to results of pipes from production shows a good agreement between simulation and reality.

  18. Analytical and Numerical Modeling for Flexible Pipes

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; CHEN Geng

    2011-01-01

    The unbonded flexible pipe of eight layers,in which all the layers except the carcass layer are assumed to have isotropic properties,has been analyzed.Specifically,the carcass layer shows the orthotropic characteristics.The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness.With consideration of the effective elastic moduli,the structure can be properly analyzed.Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated.A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque.Further,the friction and contact of interlayer have been considered.Comparison between the finite element model and experimental results obtained in literature has been given and discussed,which might provide practical and technical support for the application of unbonded flexible pipes.

  19. Flow induced pulsations in pipe systems

    Science.gov (United States)

    Bruggeman, Jan Cornelis

    1987-12-01

    The aeroacoustic behavior of a low Mach number, high Reynolds number flow through a pipe with closed side branches was investigated. Sound is generated by coherent structures of concentrated vorticity formed periodically in the separated flow in the T-shaped junctions of side branches and the main pipe. The case of moderate pulsation amplitudes was investigated. It appears that the vortical flow in a T-joint is an aeroacoustic source of constant strength when acoustic energy losses due to radiation and friction are small but not negligible. When acoustic energy losses due to radiation and friction are negligible, the nonlinear character of vortex damping is the amplitude limiting mechanism. It is stressed that aeroacoustic sources should not be neglected in studies of the response of a piping lay-out with flow to, e.g., the pulsating output of a compressor.

  20. Analytical and numerical modeling for flexible pipes

    Science.gov (United States)

    Wang, Wei; Chen, Geng

    2011-12-01

    The unbonded flexible pipe of eight layers, in which all the layers except the carcass layer are assumed to have isotropic properties, has been analyzed. Specifically, the carcass layer shows the orthotropic characteristics. The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness. With consideration of the effective elastic moduli, the structure can be properly analyzed. Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated. A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque. Further, the friction and contact of interlayer have been considered. Comparison between the finite element model and experimental results obtained in literature has been given and discussed, which might provide practical and technical support for the application of unbonded flexible pipes.

  1. Heat pipe reactors for space power applications

    Science.gov (United States)

    Koenig, D. R.; Ranken, W. A.; Salmi, E. W.

    1977-01-01

    A family of heat pipe reactors design concepts has been developed to provide heat to a variety of electrical conversion systems. Three power plants are described that span the power range 1-500 kWe and operate in the temperature range 1200-1700 K. The reactors are fast, compact, heat-pipe cooled, high-temperature nuclear reactors fueled with fully enriched refractory fuels, UC-ZrC or UO2. Each fuel element is cooled by an axially located molybdenum heat pipe containing either sodium or lithium vapor. Virtues of the reactor designs are the avoidance of single-point failure mechanisms, the relatively high operating temperature, and the expected long lifetimes of the fuel element components.

  2. Piping in need of a facelift

    CERN Multimedia

    HSE Unit

    2013-01-01

    The LS1 offers a good opportunity to renovate/consolidate the CERN piping system. This is actually one of this year’s objectives set by CERN's Director-General as the state of several pressurised pipe networks has become a matter of significant concern. The ageing infrastructure makes it essential to perform in-depth inspections and repairs on several networks, which are easier to perform when most systems are down.   We are advising each Department/Group concerned to take a series of actions to ensure that their pipelines comply with personal, environmental and operational safety requirements: an inventory of ageing installations to allow a long-term replacement plan to be drawn up; immediate repair in the event of major signs of deterioration; investigation and repair/mitigation measures to prevent leaks; marking and, if necessary, mechanical protection of pipes located in thoroughfares and exposed to vehicles or people. Help needed, questions? Do not hesitate to contact us ...

  3. Novel Wick Structures for Improved Heat Pipe Performance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Heat pipes are commonly used for transporting heat over relatively long distances with very low temperature drop. One of the limitations of heat pipes is the...

  4. Inertial Effects on Finite Length Pipe Seismic Response

    Directory of Open Access Journals (Sweden)

    Virginia Corrado

    2012-01-01

    Full Text Available A seismic analysis for soil-pipe interaction which accounts for length and constraining conditions at the ends of a continuous pipe is developed. The Winkler model is used to schematize the soil-structure interaction. The approach is focused on axial strains, since bending strains in a buried pipe due to the wave propagation are typically a second-order effect. Unlike many works, the inertial terms are considered in solving equations. Accurate numerical simulations are carried out to show the influence of pipe length and constraint conditions on the pipe seismic strain. The obtained results are compared with results inferred from other models present in the literature. For free-end pipelines, inertial effects have significant influence only for short length. On the contrary, their influence is always important for pinned pipes. Numerical simulations show that a simple rigid model can be used for free-end pipes, whereas pinned pipes need more accurate models.

  5. Applications and market of PVC for piping industry

    National Research Council Canada - National Science Library

    Johnny De N. Martins; Estevão Freire; Henry Hemadipour

    2009-01-01

    .... Pipes and fittings constitute the largest volume application at 40% of the marketplace. This paper discusses the piping extrusion process and the worldwide PVC market, emphasizing the Brazilian market...

  6. Hydrophobic liquid/gas separator for heat pipes

    Science.gov (United States)

    Marcus, B. D.

    1972-01-01

    Perforated nonwetting plug of material such as polytetrafluoroethylene is mounted in gas reservoir feed tube, preferably at end which extends into heat pipe condenser section, to prevent liquid from entering gas reservoir of passively controlled heat pipe.

  7. Pigging ends freezeups in caustic piping system

    Energy Technology Data Exchange (ETDEWEB)

    Gros, R.; Gaines, A.

    1985-03-01

    Convent Chemical Corporation in Convent, LA produces and ships bulk quantities of chlorine and caustic soda (NaOH). The caustic soda is available in various grades, including a 50% aqueous solution that freezes at 56/sup 0/F. An extensive network of chemical-resistant polypropylene-lined steel pipe (without heat tracing) is used to transfer the caustic soda from the production area to storage tanks and to the loading facilities for tank trucks, rail tank cars and barges. A sudden drop in ambient temperature can cause freezeup of the caustic transfer pipes which may result in downtime of as much as a week. Convent plant engineers designed a pigging system for the outdoor caustic transfer lines in the tank farm and to the loading stations. The patented design pig, (internal pipeline cleaner) consists of a flexible, bullet-shaped cylinder of chemical-resistant polyurethane foam with strips of urethane rubber on the surface, or with a solid coating of the tough material. Fluid or gas pressure on the sealed concave base propels the flexible pig through the pipe, valves, elbows, and other fittings, and material ahead of the pig is discharged into an appropriate receiver. The pigging system has eliminated the caustic freezing and plugging problems since it was installed in the summer of 1981. The flexible pig, propelled by 80 psi air, is used to clear the pipelines whenever caustic is transferred during the winter months. The air-propelled pig is designed and sized to easily pass through restrictions in the piping system, such as reduced port plug valves, but was once stuck when it reached a section of pipe that had collapsed. A pig containing the Cobalt 60 nuclear element was inserted into the line to quickly locate the stuck pig with the Geiger counter. The faulty section of pipe was replaced with a new polypropylene lined spool piece.

  8. Variable conductance heat pipe technology. [research project resulting in heat pipe experiment on OAO-3 satellite

    Science.gov (United States)

    Anderson, W. T.; Edwards, D. K.; Eninger, J. E.; Marcus, B. D.

    1974-01-01

    A research and development program in variable conductance heat pipe technology is reported. The project involved: (1) theoretical and/or experimental studies in hydrostatics, (2) hydrodynamics, (3) heat transfer into and out of the pipe, (4) fluid selection, and (5) materials compatibility. The development, fabrication, and test of the space hardware resulted in a successful flight of the heat pipe experiment on the OAO-3 satellite. A summary of the program is provided and a guide to the location of publications on the project is included.

  9. Piping and tubing technology: A compilation

    Science.gov (United States)

    1971-01-01

    A compilation on the devices, techniques, and methods used in piping and tubing technology is presented. Data cover the following: (1) a number of fittings, couplings, and connectors that are useful in joining tubing and piping and various systems, (2) a family of devices used where flexibility and/or vibration damping are necessary, (3) a number of devices found useful in the regulation and control of fluid flow, and (4) shop hints to aid in maintenance and repair procedures such as cleaning, flaring, and swaging of tubes.

  10. Application of Heat Pipes in Cold Region

    Science.gov (United States)

    Mochizuki, Masataka

    Recently, there has been put into practical use of heat pipes as space application, electronics cooling, and waste heat recovery. Especially, the low temperature heat pipe which can be used in below atmospheric temperature are also actively developed and applied in terrestrial field. These are based on utilization of natural energy in cold region. This paper is described about application of snow melting and deicing system on a road and roof, snow damage prevention system for electric pole branch wire, artificial permafrost storage system as a reverse utilization of cold atmosphere, and cryo-anchor applied in Alaska and northern Canada.

  11. ATLAS Beam Pipe and LUCID Detector

    CERN Multimedia

    2008-01-01

    The film will show you the descending and installation of the last element of the LHC beam pipe. Around the beam pipe is installed an ATLAS detector called LUCID. The same kind of element is on both sides of ATLAS. This detector measures the rate of the collisions in ATLAS. You can also get more information about LUCID detector by watching the part were Vincent Hedberg is interviewed (00:01:20). Almost at the end of the film there is the interview of the Raymond Veness. He tells about the delicate operations of finishing the vacuum system and the LHC (00:26:00).

  12. Reconfigurable manufacturing execution system for pipe cutting

    Science.gov (United States)

    Yin, Y. H.; Xie, J. Y.

    2011-08-01

    This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

  13. INVESTIGATION INTO THE SPRINGBACK OF PIPE BENDING USING INDUCTION HEATING

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Stresses and deformation states of pipe bending are investigated under loading or unloading with various pipe materials, size, bending radius and deformation temperature. A theorem of springback of large diameter pipe bending is presented. The experiments are carried out with pipe materials of 20, 10CrMo910 and 12Cr1MoV steel. Results of computations are in good agreement with experiments.

  14. Experimental investigations on an axial grooved cryogenic heat pipe

    Directory of Open Access Journals (Sweden)

    Senthil Kumar Muniappan

    2012-01-01

    Full Text Available This paper deals with development and studies of a trapezoidal axial grooved nitrogen heat pipe. A special liquid nitrogen cryostat has been designed and developed for evaluating the performance of heat pipe where the condenser portion is connected to the cold sink externally. Experiments have been performed on the heat pipe as well as on an equivalent diameter copper rod at different heat loads. The steady state performance of the heat pipe is compared with that of copper rod.

  15. The Puzzle of a Marble in a Spinning Pipe

    Science.gov (United States)

    2015-05-01

    MAY 2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE The Puzzle of a Marble in a Spinning Pipe 5a. CONTRACT...inside a rotating pipe and then suddenly released? 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR... pipe (of slightly larger diameter than the marble) and held there by a catch. The pipe is glued to a rotating turntable having frictionless bearings

  16. Design of macro-synthetic fibre reinforced concrete pipes

    OpenAIRE

    Fuente, Albert de la; Escariz, Renata Campos; Figueiredo,Antonio Domingues de; Aguado, Antonio

    2013-01-01

    This paper presents an experimental campaign in which concrete pipes were manufactured using plastic fibres as the sole reinforcement material. In this regard, it has been demonstrated that the use of plastic fibres is compatible with pipe production systems, and that, when subjected to the crushing test (CT), plastic fibre reinforced pipes yield strength classes that are attractive in terms of the growth of this material in the concrete pipe industry. Moreover, the results obtained from b...

  17. 33 CFR 157.11 - Pumping, piping and discharge arrangements.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Pumping, piping and discharge... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.11 Pumping, piping and discharge arrangements. (a) Each tank vessel must have a fixed piping system for transferring oily mixtures from...

  18. 46 CFR 119.510 - Bilge piping system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Bilge piping system. 119.510 Section 119.510 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Ballast Systems § 119.510 Bilge piping system. A vessel must be provided with a piping system that...

  19. 46 CFR 56.50-105 - Low-temperature piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Low-temperature piping. 56.50-105 Section 56.50-105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-105 Low-temperature piping. (a) Class...

  20. 46 CFR 45.153 - Through-hull piping: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Through-hull piping: General. 45.153 Section 45.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Conditions of Assignment § 45.153 Through-hull piping: General. (a) All through-hull pipes required by...

  1. 46 CFR 154.910 - Inert gas piping: Location.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas piping: Location. 154.910 Section 154.910 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  2. 46 CFR 151.15-6 - Venting piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Venting piping. 151.15-6 Section 151.15-6 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Tanks § 151.15-6 Venting piping. (a) The back pressure in the relief... condensate which may accumulate in the vent piping. (b)...

  3. 46 CFR 154.1834 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 154.1834 Section 154.1834... piping. The person in charge of cargo transfer shall ensure that cargo is transferred to or from a cargo tank only through the cargo piping system....

  4. 46 CFR 194.20-19 - Piping and electrical requirements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping and electrical requirements. 194.20-19 Section 194.20-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... Storerooms § 194.20-19 Piping and electrical requirements. (a) Piping, electrical equipment, and wiring...

  5. 29 CFR 1915.163 - Ship's piping systems.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's piping systems. 1915.163 Section 1915.163 Labor... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.163 Ship's piping systems. (a) Before work is performed on a valve, fitting, or section...

  6. 46 CFR 56.50-20 - Pressure relief piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Pressure relief piping. 56.50-20 Section 56.50-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-20 Pressure relief piping. (a)...

  7. 49 CFR 179.400-17 - Inner tank piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Inner tank piping. 179.400-17 Section 179.400-17 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...-17 Inner tank piping. (a) Product lines. The piping system for vapor and liquid phase transfer...

  8. 46 CFR 153.283 - Valving for cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Valving for cargo piping. 153.283 Section 153.283... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.283 Valving for cargo piping. (a) Except as described in...

  9. 46 CFR 105.20-5 - Piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping systems. 105.20-5 Section 105.20-5 Shipping COAST... VESSELS DISPENSING PETROLEUM PRODUCTS Specific Requirements-Cargo Tanks § 105.20-5 Piping systems. (a) Piping shall be copper, nickel copper, or copper nickel having a minimum wall thickness of 0.035″;...

  10. 46 CFR 34.25-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.25-15 Section 34.25-15 Shipping COAST... Systems, Details § 34.25-15 Piping—T/ALL. (a) All piping, valves and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) Distribution piping shall be...

  11. 46 CFR 58.16-17 - Piping and fittings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping and fittings. 58.16-17 Section 58.16-17 Shipping... AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-17 Piping and fittings. (a) The piping between the cylinders and the appliances shall be seamless annealed copper tubing...

  12. 46 CFR 34.10-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.10-15 Section 34.10-15 Shipping COAST... § 34.10-15 Piping—T/ALL. (a) All piping, valves and fittings shall meet the applicable requirements of... isolate damaged sections of piping except on self-propelled vessels carrying bulk liquefied gases...

  13. 46 CFR 154.356 - Cargo emergency jettisoning piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo emergency jettisoning piping. 154.356 Section 154.356 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Ship Arrangements § 154.356 Cargo emergency jettisoning piping. Emergency jettisoning piping...

  14. 46 CFR 34.20-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.20-15 Section 34.20-15 Shipping COAST... § 34.20-15 Piping—T/ALL. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings of ferrous...

  15. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... visited by the crew. (e) Through-hull piping systems in machinery spaces may have valves with...

  16. 46 CFR 98.30-29 - Piping incompatible products.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping incompatible products. 98.30-29 Section 98.30-29 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL... Piping incompatible products. No person may pipe a portable tank with another tank that contains...

  17. 46 CFR 56.50-85 - Tank-vent piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tank-vent piping. 56.50-85 Section 56.50-85 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-85 Tank-vent piping. (a) This...

  18. 46 CFR 153.970 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 153.970 Section 153.970 Shipping... § 153.970 Cargo transfer piping. The person in charge of cargo transfer shall ensure that: (a) Cargo is transferred to or from a cargo tank only through the tankship's cargo piping system; (b) Vapor not returned...

  19. 46 CFR 154.526 - Piping joints: Flange connection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Flange connection. 154.526 Section 154.526 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Cargo and Process Piping Systems § 154.526 Piping joints: Flange connection. Flange...

  20. 46 CFR 34.17-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.17-15 Section 34.17-15 Shipping COAST... Systems, Details § 34.17-15 Piping—T/ALL. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  1. 46 CFR 58.20-20 - Refrigeration piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Refrigeration piping. 58.20-20 Section 58.20-20 Shipping... AND RELATED SYSTEMS Refrigeration Machinery § 58.20-20 Refrigeration piping. (a) All piping materials... chemical and physical properties as to remain ductile at the lowest operating temperature. (b)...

  2. 46 CFR 58.60-7 - Industrial systems: Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Piping. 58.60-7 Section 58.60-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY...) § 58.60-7 Industrial systems: Piping. The piping for industrial systems under this subpart must...

  3. 46 CFR 153.281 - Piping to independent tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping to independent tanks. 153.281 Section 153.281... Systems and Cargo Handling Equipment § 153.281 Piping to independent tanks. Piping for an independent cargo tank must penetrate the tank only through that part of the tank or dome extending above...

  4. Mashing up Multiple Web Feeds Using Yahoo! Pipes

    Science.gov (United States)

    Fagan, Jody Condit

    2007-01-01

    Pipes is an interactive data aggregator and manipulator that lets you mashup your favorite online data sources. Pipes could be used to "combine many feeds into one, then sort, filter and translate to create your ultimate custom feed. In this article, the author describes how to use Yahoo! Pipes. The author shares what she has learned in…

  5. 49 CFR 192.193 - Valve installation in plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Valve installation in plastic pipe. 192.193... Components § 192.193 Valve installation in plastic pipe. Each valve installed in plastic pipe must be designed so as to protect the plastic material against excessive torsional or shearing loads when the...

  6. 49 CFR 192.287 - Plastic pipe: Inspection of joints.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe: Inspection of joints. 192.287... Than by Welding § 192.287 Plastic pipe: Inspection of joints. No person may carry out the inspection of joints in plastic pipes required by §§ 192.273(c) and 192.285(b) unless that person has been qualified...

  7. 49 CFR 192.123 - Design limitations for plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design limitations for plastic pipe. 192.123... Design limitations for plastic pipe. (a) Except as provided in paragraph (e) and paragraph (f) of this section, the design pressure may not exceed a gauge pressure of 100 psig (689 kPa) for plastic pipe...

  8. 49 CFR 192.311 - Repair of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Repair of plastic pipe. 192.311 Section 192.311... Lines and Mains § 192.311 Repair of plastic pipe. Each imperfection or damage that would impair the serviceability of plastic pipe must be repaired or removed....

  9. 49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe: Qualifying joining procedures. 192... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the...

  10. 49 CFR 195.207 - Transportation of pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Transportation of pipe. 195.207 Section 195.207... PIPELINE Construction § 195.207 Transportation of pipe. (a) Railroad. In a pipeline operated at a hoop stress of 20 percent or more of SMYS, an operator may not use pipe having an outer diameter to wall...

  11. 49 CFR 236.17 - Pipe for operating connections, requirements.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Pipe for operating connections, requirements. 236... Rules and Instructions: All Systems General § 236.17 Pipe for operating connections, requirements. (a) Steel or wrought-iron pipe one inch or larger, or members of equal strength, shall be used for operating...

  12. 49 CFR 192.65 - Transportation of pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Transportation of pipe. 192.65 Section 192.65... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.65 Transportation of pipe. (a) Railroad... pipe having an outer diameter to wall thickness ratio of 70 to 1, or more, that is transported by...

  13. 49 CFR 192.309 - Repair of steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Repair of steel pipe. 192.309 Section 192.309... Lines and Mains § 192.309 Repair of steel pipe. (a) Each imperfection or damage that impairs the serviceability of a length of steel pipe must be repaired or removed. If a repair is made by grinding, the...

  14. 46 CFR 154.1125 - Pipes, fittings, and valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipes, fittings, and valves. 154.1125 Section 154.1125... Firefighting § 154.1125 Pipes, fittings, and valves. (a) Each pipe, fitting, and valve for each water spray... listed in § 154.1110 must have at least one isolation valve at each branch connection and at least...

  15. Optical aberrations in a spinning pipe gas lens

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-06-01

    Full Text Available If a heated pipe is rotated about its axis, a density gradient is formed which results in the pipe acting as a graded index lens. In this study the authors revisit the concept of a spinning pipe gas lens and for the first time analyse both the wave...

  16. Critical velocity and dynamic respondency of pipe conveying fluid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Presents the calculation of critical velocity, natural frequencyand dynamic respondency of fluid-conveying pipe are calculated under different boundary conditions using finite element method, and the use of calculation results to design and research rocket pipes feeding fuel and watery turbine pipes conveying water etc.

  17. Dehumidification in greenhouses by condensation on finned pipes

    NARCIS (Netherlands)

    Campen, J.C.; Bot, G.P.A.

    2001-01-01

    In this study, an experimental dehumidifying system for greenhouses is tested. The system uses finned pipes fixed under the gutter of the greenhouse. The pipes are cooled below the dewpoint of the greenhouse air by cold water. The humid air passes the pipe and fins by natural convection and

  18. Development of Submersible Corrugated Pipe Sewage Heat Exchanger

    Institute of Scientific and Technical Information of China (English)

    BAI Li; SHI Yan; TAN Yu-fei

    2009-01-01

    Based on the characteristics of heat transfer for corrugated pipe,a method of calculating and de-sign on the submersible corrugated pipe sewage heat exchanger was put forward theoretically and experimental-ly.The actual movement parameters of air-conditioning system used in this heat exchanger were measured.The experimental result shows that the quantity of heat transfer of the corrugated pipe sewage heat exchanger can satisfy the building's load with the average coefficient of performance 4.55.At the same time.the quantity ot heat transfer of the corrugated pipe sewage heat exchanger was compared with that of the other nonmetallic sewage heat exchangers(i.e.,the plastic-Al pipe sewage heat exchanger and PP-R pipe sewage heat exchanger)experimentally.It is found out that the effect of heat transfer for submersible corrugated pipe sewage heat ex-changer is superior to those of the plastic-Al pipe and the PP-R pipe.The quantity of heat transfer per mile of corrugated pipe sewage heat exchanger is 5.2 times as much as that of the plastic-Al pipe,and it is 8.1 times as much as that of PP-R pipe.

  19. 46 CFR 154.517 - Piping: Liquid pressure relief.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Liquid pressure relief. 154.517 Section 154.517 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.517 Piping: Liquid pressure relief. The cargo loading and discharge...

  20. Temperature fluctuation phenomena in a normally stagnant pipe connected downward to a high velocity and high temperature main pipe

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Akira, E-mail: a-naka@inss.co.jp [Institute of Nuclear Technology, Institute of Nuclear Safety System, Inc., 64 Sata Mihama-cho, Fukui 919-1205 (Japan); Miyoshi, Koji [Institute of Nuclear Technology, Institute of Nuclear Safety System, Inc., 64 Sata Mihama-cho, Fukui 919-1205 (Japan); Oumaya, Toru [Mechanical Engineering Group, Nuclear Power Division, Kansai Electric Power Co. Inc., 8 Yokota, 13 Goichi, Mihama-cho, Fukui 919-1141 (Japan); Takenaka, Nobuyuki; Hosokawa, Shigeo; Hamatani, Daisuke; Hase, Masatsugu; Onojima, Daisuke; Yamamoto, Yasuhiro; Saito, Atsushi [Department of Mechanical Engineering, Kobe University, 1-1 Rokkodai-cho, Higashinada-ku, Kobe 657-8501 (Japan)

    2014-04-01

    Highlights: • Flow patterns in a branch pipe with a closed end were observed by visualization. • The penetration length was investigated using experiments and numerical simulations. • The temperature fluctuation mechanism related to spiral flow was discussed. - Abstract: Numerous pipes branch off from the main pipes in power plant facilities. Main pipe flow initiates a cavity flow in a downward branch pipe with a closed end and a thermally stratified layer may form in the branch pipe if there is significant temperature difference in the main and branch pipe fluids. Fluctuation of a thermally stratified layer may initiate thermal fatigue crack in the branch pipe. In the present study, flow structures and temperature fluctuations in a branch pipe are investigated by experiments and numerical simulations to understand detailed behavior of the layer in a straight pipe and in a bent pipe. The penetration length of the main flow is measured for various main pipe flow velocities. The flow patterns in a straight pipe are divided into three regions by visualization with a tracer method, i.e., cavity flow in region 1, disturbed flow in the transition region, and spiral flow in region 2. The fluid temperature fluctuation in a straight pipe after the increase of main pipe flow velocity is attenuated in several hundred seconds since the thermal stratified layer goes down under the area into which the spiral vortex reaches. The fluid temperature in a bent pipe fluctuates when the spiral vortex reaches its lowest point after a long time period. Periodical velocity fluctuations during several tens second period are observed in the spiral flow. The mechanism of temperature fluctuation near the thermal stratified layer is considered with respect to the interference by the spiral flow and the fixed thermal stratified layer at the bent section by the cold water provided from the horizontal section.

  1. Reliability of piping system components. Volume 1: Piping reliability - A resource document for PSA applications

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, R.; Erixon, S.; Tomic, B.; Lydell, B.

    1995-12-01

    SKI has undertaken a multi-year research project to establish a comprehensive passive component failure database, validate failure rate parameter estimates and establish a model framework for integrating passive component failures in existing PSAs. Phase 1 of the project produced a relational database on worldwide piping system failure events in the nuclear and chemical industries. This phase 2 report gives a graphical presentation of piping system operating experience, and compares key failure mechanisms in commercial nuclear power plants and chemical process industry. Inadequacies of traditional PSA methodology are addressed, with directions for PSA methodology enhancements. A data-driven-and-systems-oriented analysis approach is proposed to enable assignment of unique identities to risk-significant piping system component failures. Sufficient operating experience does exist to generate quality data on piping failures. Passive component failures should be addressed by today`s PSAs to allow for aging analysis and effective, on-line risk management. 111 refs, 36 figs, 20 tabs.

  2. 78 FR 62614 - Guttman Energy, Inc., PBF Holding Company LLC v. Buckeye Pipe Line Company, L.P., Laurel Pipe...

    Science.gov (United States)

    2013-10-22

    ... Energy Regulatory Commission Guttman Energy, Inc., PBF Holding Company LLC v. Buckeye Pipe Line Company, L.P., Laurel Pipe Line Company, L.P.; Notice of Complaint Take notice that on October 15, 2013... Energy Regulatory Commission (Commission) a complaint against Buckeye Pipe Line Company L.P. and Laurel...

  3. Tube drawing technology for seamless pipes. Application to the Cu/Nb/Cu sandwiched pipes

    Energy Technology Data Exchange (ETDEWEB)

    Tsukada, Saburo; Ohnuki, Masao [Hitachi Cable, Ltd., Tsuchiura, Ibaraki (Japan); Fujino, Takeo; Saito, Kenji; Inoue, Hitoshi; Hitomi, Nobuteru; Yamazaki, Yoshishige [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan); Watanabe, Kakuji [Okuda Kinzoku Co. Ltd., Ota, Fukui (Japan)

    2001-02-01

    Tube drawing technology based on copper tubes at the Hitachi Cable Corporation was applied to manufacture Cu/Nb/Cu sandwiched seamless pipes for Nb/Cu clad superconducting RF cavities, which is being developed at KEK. This is the first application in our company. We met several problems but finally succeeded to fabricate 11 pipes needed to hydro-bulge forming for 1300 MHz single cell cavities. Here, we explain this technology and report the problems which happened during the manufacturing. (author)

  4. Section of CMS Beam Pipe Removed

    CERN Multimedia

    2013-01-01

    Seven components of the beam pipe located at the heart of the CMS detector were removed in recent weeks. The delicate operations were performed in several stages as the detector was opened. Video of the extraction of one section: http://youtu.be/arGuFgWM7u0

  5. LHCb celebrates completion of its beam pipe

    CERN Multimedia

    2007-01-01

    Members of the LHCb collaboration and of the AT and TS Departments are ready to pop open the champagne bottles and celebrate the complete installation and commissioning of the LHCb experiment’s beam pipe. Members of the LHCb collaboration and of the AT and TS Departments gather near the newly completed beam pipe in the foreground. All four sections of LHCb’s beam pipe have been installed, interconnected, pumped down and baked out.. Three of the conical tubes are made of beryllium in order to minimize the level of background in the experiment, while the fourth and largest section is composed of stainless steel. The first of the beryllium sections, an important connection to the Vertex Locator vacuum vessel (VELO) was installed in August 2006 (see Bulletin No. 37/2006). One of the more challenging tasks was the installation of the longest (6 m) piece of beryllium beam pipe through the 2.4 m long RICH2 detector in January 2006. Deli...

  6. "Colgate-Plus"--An Imperfect Light Pipe.

    Science.gov (United States)

    Ouseph, P. J.

    1993-01-01

    Describes the effects when a clear toothbrush is used as total internally reflecting light pipe when attached to a laser. Several explanations are given describing the nonuniformity of the transmitted light resulting from surface and internal irregularities found in the toothbrush. (MVL)

  7. Impedance of a slotted-pipe kicker

    Energy Technology Data Exchange (ETDEWEB)

    Feng Zhou [Academia Sinica, Beijing, BJ (China). Inst. of High Energy Physics

    1996-08-01

    This paper introduces the principle of a new slotted kicker simply, which is made by using vacuum pipe itself with proper slits as current conductors, and then, presents a rough estimation of its longitudinal and transverse impedance, respectively. Calculation shows that its impedance is reduced significantly compared to our present air-coil kicker. (author)

  8. Explosive Forming of Butt Welded Pipe Reducers.

    Science.gov (United States)

    1979-04-01

    NOSL MT OS2 _ Eli _ _El [LII] DliB I I —~~~~~~~~~~ I 4 1 V S -. RB’ORT NO. M1052 AP~t 1919v-fl o~toswE FORMING (j~~c BUTI WELDED PIPE RE~~~ A PQWECT

  9. Detection of Gas Slugs in Heat Pipes

    Science.gov (United States)

    Jones, J. A.

    1985-01-01

    Temperature sensing system detects presence of gas slugs in heat pipes. System designed for operation between zero and 70 degrees C and detects noncondensable pockets of gas that result from decomposition of ammonia cooling fluid. Slugs 1 in. (25mm) in length detected.

  10. Potshemu medved rõtshit / Richard Pipes

    Index Scriptorium Estoniae

    Pipes, Richard

    2006-01-01

    Harvardi ülikooli ajalooprofessor Richard Pipes arutleb, miks Venemaa viimase aja käitumises väljendub soovimatus koostööks, sageli ka vaenulikkus. Venemaa võimetus rahvusvahelises kontekstis oma kohta leida, selle ajaloolised juured

  11. Use of pipe saks on pipeline construction

    Energy Technology Data Exchange (ETDEWEB)

    Ghio, Alberto F.M.; Caciatori, Angelo [Galvao Engenharia S.A., Sao Paulo, SP (Brazil); Ruschi, Allan A.; Santos, Felipe A. dos; Barros, Horacio B. de; Loureiro, Regis R. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The use of new technologies applied to pipeline construction and assembling, aimed at enhancing productivity has been searched by PETROBRAS, throughout its subcontractors, assemblers, by transference in the mentioned constructions. Along the construction of Cacimbas Catu Pipeline, Spread 1 A, placed between the Cacimbas Gas Treatment Station (Linhares, ES) and the future Compression Station of Sao Mateus (ES), one, by means of surveys, noticed that the length of flooded or prone to flooding areas was way superior to the ones foreseen in the basic design. One of the broadly used methods for assuring buoyancy control is concreting the pipes. Such method deeply impacts work's logistics in for instance, the pipe stringing work; in this one, a maximum load of two pipes can be transported until the area to applied, what leads to lower productivity and higher risk due to the increase of trips by heavy load trucks. As an alternative to regular concrete, the Pipe Sak System was adopted and such method improved productivity and decreased discontinuities. (author)

  12. Potshemu medved rõtshit / Richard Pipes

    Index Scriptorium Estoniae

    Pipes, Richard

    2006-01-01

    Harvardi ülikooli ajalooprofessor Richard Pipes arutleb, miks Venemaa viimase aja käitumises väljendub soovimatus koostööks, sageli ka vaenulikkus. Venemaa võimetus rahvusvahelises kontekstis oma kohta leida, selle ajaloolised juured

  13. Vibrations of a pipe on elastic foundations

    Indian Academy of Sciences (India)

    S V Lilkova-Markova; D S Lolov

    2004-06-01

    A cantilevered pipe subjected to external transverse (or lateral) force is investigated. Two cases of elastic foundations are considered: rotational and both linear and rotational. The major findings are the variations in frequency with flow velocity and displacements at different points and times.

  14. 46 CFR 108.447 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.447 Section 108.447 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT Fire... CO2 system may not be used for any other purpose except as part of a fire detection system. (i)...

  15. Dual phase steel for line pipe applications

    Energy Technology Data Exchange (ETDEWEB)

    Merwin, M.J. [United States Steel Corp., Research and Technology Centre, Monroeville, PA (United States)

    2005-07-01

    This paper presents the results of a laboratory study of 2 samples of commercially produced line pipe from the same melting grade. The chemistries of the steel samples were presented. The study was conducted in response to requests by the American Petroleum Institute (API) for line pipe steel with a yield-strength-to-tensile-strength ratio (Y/T) of 0.85 or less, for use in offshore installations. The United States Steel Corporation initiated this program to achieve lower Y/T for line pipe grades while maintaining robust processing capability and mechanical properties. Heat treated seamless tubular products are typically processed in a manner that can be readily modified to produce dual phase microstructures by applying intercritical soaking before quenching. The steel line pipe industry is interested in dual phase steel for use in reel barge pipe laying operations because the the yield strength of dual phase steel is lower than tensile strength. In this study, the compositions of commercially produced material already in use for the line pipe market were studied. The developed dual phase microstructures were found to be stable over a range of intercritical temperatures. Tempering temperature and small chemistry differences were found to have the greatest influence on properties. The toughness performance was found to be excellent in samples tempered at temperatures greater than 550 degrees C, a regime which produced materials with strength suitable for use in API X60 line pipe. An incomprehensible difference in tensile strength between steels of similar chemistry was also noted. Welding performance was examined through the simulation of 3 regions of the heat-affected zone. The heat-affected zone properties were not influenced by either intercritical or tempering temperature. The only significant factor was the peak temperature that was achieved in the thermal cycle. The hardness of the heat-affected zone increased continuously with increasing peak temperature

  16. Optimization Design and Application of Underground Reinforced Concrete Bifurcation Pipe

    Directory of Open Access Journals (Sweden)

    Chao Su

    2015-01-01

    Full Text Available Underground reinforced concrete bifurcation pipe is an important part of conveyance structure. During construction, the workload of excavation and concrete pouring can be significantly decreased according to optimized pipe structure, and the engineering quality can be improved. This paper presents an optimization mathematical model of underground reinforced concrete bifurcation pipe structure according to real working status of several common pipe structures from real cases. Then, an optimization design system was developed based on Particle Swarm Optimization algorithm. Furthermore, take the bifurcation pipe of one hydropower station as an example: optimization analysis was conducted, and accuracy and stability of the optimization design system were verified successfully.

  17. Applications and market of PVC for piping industry

    Directory of Open Access Journals (Sweden)

    Johnny De N. Martins

    2009-01-01

    Full Text Available The use of plastic materials by the piping industry accounts for a significant volume of polymers. In this segment PVC represents the largest worldwide market for plastics. PVC is often used in plastic pressure pipe systems for pipelines in the water and sewer industries because of its inexpensive nature and flexibility. Pipes and fittings constitute the largest volume application at 40% of the marketplace. This paper discusses the piping extrusion process and the worldwide PVC market, emphasizing the Brazilian market. It is also presented a case study including an overall cost calculation for making an extrusion line for PVC piping.

  18. Numerical study of heat pipe application in heat recovery systems

    Energy Technology Data Exchange (ETDEWEB)

    Song Lin; Broadbent, John; McGlen, Ryan [Thermacore Europe, Ashington (United Kingdom)

    2005-01-01

    Heat pipes are two-phase heat transfer devices with extremely high effective thermal conductivity. They can be cylindrical or planar in structure. Heat pipes can be embedded in a metal cooling plate, which is attached to the heat source, and can also be assembled with a fin stack for fluid heat transfer. Due to the high heat transport capacity, heat exchangers with heat pipes have become much smaller than traditional heat exchangers in handling high heat fluxes. With the working fluid in a heat pipe, heat can be absorbed on the evaporator region and transported to the condenser region where the vapour condenses releasing the heat to the cooling media. Heat pipe technology has found increasing applications in enhancing the thermal performance of heat exchangers in microelectronics, energy and other industrial sectors. Utilisation of a heat pipe fin stack in the drying cycle of domestic appliances for heat recovery may lead to a significant energy saving in the domestic sector. However, the design of the heat pipe heat exchanger will meet a number of challenges. This paper presents a design method by using CFD simulation of the dehumidification process with heat pipe heat exchangers. The strategies of simulating the process with heat pipes are presented. The calculated results show that the method can be further used to optimise the design of the heat pipe fin stack. The study suggests that CFD modelling is able to predict thermal performance of the dehumidification solution with heat pipe heat exchangers. (Author)

  19. Study of fatigue behavior of longitudinal welded pipes

    Science.gov (United States)

    Simion, P.; Dia, V.; Istrate, B.; Hrituleac, G.; Hrituleac, I.; Munteanu, C.

    2016-08-01

    During transport and storage of the various fluids, welded pipes are subjected to cyclic loading due to pressure fluctuations that often exceed the prescribed values for normal operation. These cyclic loading can significantly reduce the life of the pipes; as a result the design should be based on the fatigue strength not only on static resistance. In general the fatigue strength of pipes is dependent by strength, pipe geometry and surface quality. In case of the electric longitudinal welded pipes, the fatigue strength is significantly limited by concentration of residual stress and the size of existing defects in the weld seam. This paper presents the fatigue behaviour of the electric welded pipes by high frequency, under conditions that simulate real operating conditions pipes. Fatigue testing was performed on welded pipes made of micro alloyed carbon steels. Some of these pipes were previously subjected to a heat treatment of normalization, in order to also determine the influence of heat treatment on the fatigue strength of welded pipes. To determine and correlate the different factors affecting the fatigue strength, welded pipes were also subjected to various tests: tensile tests, impact tests, measurement of micro hardness, microstructural analysis by optical microscopy and scanning electron microscopy.

  20. Working fluid flow visualization in gravity heat pipe

    Directory of Open Access Journals (Sweden)

    Nemec Patrik

    2016-01-01

    Full Text Available Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapour and vice versa help heat pipe to transport high heat flux. The article deal about gravity heat pipe construction and processes casing inside during heat pipe operation. Experiment working fluid flow visualization is performed with two glass heat pipes with different inner diameter (13 mm and 22 mm and filled with water. The working fluid flow visualization explains the phenomena as a working fluid boiling, nucleation of bubbles, and vapour condensation on the wall, vapour and condensate flow interaction, flow down condensate film thickness on the wall occurred during the heat pipe operation.

  1. Working fluid flow visualization in gravity heat pipe

    Science.gov (United States)

    Nemec, Patrik; Malcho, Milan

    2016-03-01

    Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapour and vice versa help heat pipe to transport high heat flux. The article deal about gravity heat pipe construction and processes casing inside during heat pipe operation. Experiment working fluid flow visualization is performed with two glass heat pipes with different inner diameter (13 mm and 22 mm) and filled with water. The working fluid flow visualization explains the phenomena as a working fluid boiling, nucleation of bubbles, and vapour condensation on the wall, vapour and condensate flow interaction, flow down condensate film thickness on the wall occurred during the heat pipe operation.

  2. Modeling and analysis of water-hammer in coaxial pipes

    CERN Document Server

    Cesana, Pierluigi

    2015-01-01

    The fluid-structure interaction is studied for a system composed of two coaxial pipes in an annular geometry, for both homogeneous isotropic metal pipes and fiber-reinforced (anisotropic) pipes. Multiple waves, traveling at different speeds and amplitudes, result when a projectile impacts on the water filling the annular space between the pipes. In the case of carbon fiber-reinforced plastic thin pipes we compute the wavespeeds, the fluid pressure and mechanical strains as functions of the fiber winding angle. This generalizes the single-pipe analysis of J. H. You, and K. Inaba, Fluid-structure interaction in water-filled pipes of anisotropic composite materials, J. Fl. Str. 36 (2013). Comparison with a set of experimental measurements seems to validate our models and predictions.

  3. Burst limit state reliability for fiber-wrapped steel pipe

    Energy Technology Data Exchange (ETDEWEB)

    Dann, Markus R. [University of Calgary (Canada); Maes, Marc A. [Blade Energy Partners Ltd. (Canada); Salama, Mamdouh M. [ConocoPhillips Company (United States)

    2010-07-01

    In the oil and gas sector, due to the increase in demand, pipeline projects are being developed in remote areas with harsh environments. High strength steel pipelines have been developed but due to their high cost and to low production capacity, the focus is now on dry fiber augmented steel technology pipelines (FAST-Pipe). The aim of this paper is to present a probabilistic mechanical burst limit state for such fiber wrapped pipelines. This model has been developed based on a large strain Cauchy stress formulation and has been used to perform a reliability comparison between an X80 pipe and an X70 FAST-Pipe. Results showed that the FAST-Pipe has more uncertainties than the high strength steel pipe and thus lower factors should be used in their design. This paper provided a probabilistic limit state model which can be used for both steel pipes and FAST-Pipe.

  4. STRUCTURE DESIGN OF THE BEIJING SPECTROMETER Ⅲ BEAM PIPE

    Institute of Scientific and Technical Information of China (English)

    ZHENG Lifang; JI Quan; WANG Li; LI Xunfeng; XU Shaowang; DONG Sujun; ZHAO Libin; LIU Jianping

    2008-01-01

    The Beijing spectrometer Ⅲ (BESⅢ) beam pipe is in the center of the BESⅢ, which is the detector of the upgrade project of Beijing electron and positron collider (BEPCⅡ). Electrons and positrons collide in the BESⅢ beam pipe. According to the demands of the BEPCⅡ, a key program of Chinese Academy of Sciences, the BESⅢ beam pipe is designed based on the finite elements analysis. The BESⅢ beam pipe is installed in the inner cylinder of the BESⅢ drift chamber. As a vacuum tube, the BESⅢ beam pipe is designed as 1 000 mm in length, 63 mm in inner diameter and 114 mm in outer diameter, respectively. The BESⅢ beam pipe consists of a central beryllium pipe cooled by EDM-1, the oil No.1 for electric discharge machining, and two extended copper pipes cooled by deionized water (DW). The three parts are jointed by vacuum welding. Factors taken into account in the design are as follows. ① The wall thickness of the central beryllium pipe should be designed as small as possible to reduce the multi-scattering and improve the particle momentum resolution. And the wall thickness of the extended copper pipe should be designed as large as possible to protect the detectors from the backgrounds. ② The BESⅢ beam pipe must be sufficiently cooled to avoid the damage and prevents its influence to the BESⅢ drift chamber (DC) operation. The inner surface temperature of the DC inner cylinder must be maintained at 293±2 K. ③ The magnetic permeability of the materials used in the BESⅢ beam pipe must be less than 1.05 H/m to avoid large magnetic field distortions. ④ The static pressure of the vacuum chamber of the BESⅢ beam pipe must be less than 800 (Pa. The simulating results show that the designed structure of the BESⅢ beam pipe satisfies the requirements mentioned above. The structure design scheme is evaluated and adopted by the headquarters of BEPCⅡ.

  5. Corroded scale analysis from water distribution pipes

    Directory of Open Access Journals (Sweden)

    Rajaković-Ognjanović Vladana N.

    2011-01-01

    Full Text Available The subject of this study was the steel pipes that are part of Belgrade's drinking water supply network. In order to investigate the mutual effects of corrosion and water quality, the corrosion scales on the pipes were analyzed. The idea was to improve control of corrosion processes and prevent impact of corrosion on water quality degradation. The instrumental methods for corrosion scales characterization used were: scanning electron microscopy (SEM, for the investigation of corrosion scales of the analyzed samples surfaces, X-ray diffraction (XRD, for the analysis of the presence of solid forms inside scales, scanning electron microscopy (SEM, for the microstructural analysis of the corroded scales, and BET adsorption isotherm for the surface area determination. Depending on the composition of water next to the pipe surface, corrosion of iron results in the formation of different compounds and solid phases. The composition and structure of the iron scales in the drinking water distribution pipes depends on the type of the metal and the composition of the aqueous phase. Their formation is probably governed by several factors that include water quality parameters such as pH, alkalinity, buffer intensity, natural organic matter (NOM concentration, and dissolved oxygen (DO concentration. Factors such as water flow patterns, seasonal fluctuations in temperature, and microbiological activity as well as water treatment practices such as application of corrosion inhibitors can also influence corrosion scale formation and growth. Therefore, the corrosion scales found in iron and steel pipes are expected to have unique features for each site. Compounds that are found in iron corrosion scales often include goethite, lepidocrocite, magnetite, hematite, ferrous oxide, siderite, ferrous hydroxide, ferric hydroxide, ferrihydrite, calcium carbonate and green rusts. Iron scales have characteristic features that include: corroded floor, porous core that contains

  6. Application of LBB to a nozzle-pipe interface

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y.J.; Sohn, G.H.; Kim, Y.J. [and others

    1997-04-01

    Typical LBB (Leak-Before-Break) analysis is performed for the highest stress location for each different type of material in the high energy pipe line. In most cases, the highest stress occurs at the nozzle and pipe interface location at the terminal end. The standard finite element analysis approach to calculate J-Integral values at the crack tip utilizes symmetry conditions when modeling near the nozzle as well as away from the nozzle region to minimize the model size and simplify the calculation of J-integral values at the crack tip. A factor of two is typically applied to the J-integral value to account for symmetric conditions. This simplified analysis can lead to conservative results especially for small diameter pipes where the asymmetry of the nozzle-pipe interface is ignored. The stiffness of the residual piping system and non-symmetries of geometry along with different material for the nozzle, safe end and pipe are usually omitted in current LBB methodology. In this paper, the effects of non-symmetries due to geometry and material at the pipe-nozzle interface are presented. Various LBB analyses are performed for a small diameter piping system to evaluate the effect a nozzle has on the J-integral calculation, crack opening area and crack stability. In addition, material differences between the nozzle and pipe are evaluated. Comparison is made between a pipe model and a nozzle-pipe interface model, and a LBB PED (Piping Evaluation Diagram) curve is developed to summarize the results for use by piping designers.

  7. Graded-porosity heat-pipe wicks

    Science.gov (United States)

    Eninger, J. E.

    1976-01-01

    To maximize the capacity of a nonarterial heat pipe, a wick is considered whose porosity is allowed to vary axially along its length. At every axial location the porosity is set no lower than required to maintain the wick in a nearly saturated state under the maximum heat-transport rate. The result is a wick whose permeability is everywhere as high as possible. The differential equation that governs the optimum porosity variation is solved numerically between a condenser-end boundary condition that just prevents a liquid slug or puddle in the vapor spaces and an evaporator-end boundary condition that just prevents circumferential groove dry-up. Experimental performance measurements for an ammonia heat pipe are presented.

  8. DRYING WITH SOLAR COLLECTOR BY HEAT PIPE

    Directory of Open Access Journals (Sweden)

    Hikmet DOĞAN

    1999-01-01

    Full Text Available In this research, heating pipe was used in the solar collector in order to take better advantage of the solar energy. The energy obtained from the sun was transferred to the drying air by means of heating pipes and this hot air was blown on the material to be dried. The water on the material to be dried vaporised with the effect of the hot air and drying took place. Because drying took place in the shade, distant from the direct radiation effects of the sun, some of the disadvantages seen in drying outside, under the sun were eliminated. Additionally, it was observed that it took less time to dry in this method than it takes to dry under the open sun.

  9. AWSWAH - the heat pipe solar water heater

    Energy Technology Data Exchange (ETDEWEB)

    Akyurt, M.

    1986-01-01

    An all weather heat pipe solar water heater (AWSWAH) comprising a collector of 4 m/sup 2/ (43 ft/sup 2/) and a low profile water tank of 160 liters (42 gal.) was developed. A single heat pipe consisting of 30 risers and two manifolds in the evaporator and a spiral condenser was incorporated into the AWSWAH. Condensate metering was done by synthetic fiber wicks. The AWSWAH was tested alongside two conventional solar water heaters of identical dimensions, an open loop system and a closed loop system. It was found that the AWSWAH was an average of 50% more effective than the open system in the temperature range 30-90 /sup 0/C (86-194 /sup 0/F). The closed loop system was the least efficient of the three systems.

  10. Coherent structures in transitional pipe flow

    Science.gov (United States)

    Hellström, Leo H. O.; Ganapathisubramani, Bharathram; Smits, Alexander J.

    2016-06-01

    Transition to turbulence in pipe flow is investigated experimentally using a temporally resolved dual-plane particle image velocimetry approach, at a Reynolds number of 3440. The flow is analyzed using proper orthogonal decomposition and it is shown that the flow can be divided into two regions: a pseudolaminar region governed by the presence of azimuthally steady traveling waves, and turbulent slugs. The evolution of the structures within the slugs is identified by using the temporally resolved data along with the dual-plane velocity field. These structures are shown to be remarkably similar to the large-scale motions found in fully turbulent flows, with a streamwise and spatiotemporal extent about four pipe radii. The transition between structures is characterized by the detachment and decay of an old structure and the initiation of a new structure at the wall.

  11. Optimum Pipe Size Selection for Turbulent Flow

    Directory of Open Access Journals (Sweden)

    Timothy A. AKINTOLA

    2009-07-01

    Full Text Available Pipelines are normally designed to deliver fluid at the required head and flow rate in a cost effective manner. Increase in conduit diameter leads to increase in annual capital costs, and decrease in operating costs. Selection of an optimum conduit diameter for a particular fluid flow will therefore be a vital economic decision. This paper presents a computer aided optimisation technique for determination of optimum pipe diameter for a number of idealized turbulent flow. Relationships were formulated connecting theories of turbulent fluid flow with pipeline costing. These were developed into a computer program, written in Microsoft Visual C++ language, for a high-level precision estimate of the optimum pipe diameter, through the least total cost approach. The validity of the program was ascertained through case studies, representative of fluids with different densities and compressibility. The optimum conduit diameter was found to increase linearly with increase in compressibility.

  12. Long-term behaviour of GRP pipes

    OpenAIRE

    Faria, H; A Vieira; Reis, J; Marques, A. T.; Guedes, R.M.; Ferreira, A. J. M.

    2005-01-01

    The main objective of the research programme /1/ described is the study of creep and relaxation behaviour of glass-rein forced thermosetting (GRP) pipes, in order to find alternative methods to predict the long-term properties, rendering a considerable reduction of the time needed for testing and assuring, as far as possible, equivalent reliability when compared to the existing methods. Experimental procedures were performed and are presented here, together with discussion of results, as well...

  13. Overview of piping issues and trends

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.H.

    1992-12-01

    A variety of failure mechanisms that have contributed to failures in nuclear reactor piping systems are discussed: these include general corrosion, intergranular stress corrosion, erosion-corrosion, mechanical fatigue, and thermal fatigue covering the spectrum from mixing-tee to stratification. Actions to minimize or eliminate these failure mechanisms are discussed where these actions are based on the experience amassed over the past three decades.

  14. A multifunctional heat pipe sandwich panel structure

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Wadley, Haydn N.G. [University of Virginia, Department of Materials Science and Engineering, 140 Chemistry Way, P.O. Box 400745, Charlottesville, VA 22904 (United States); Carbajal, Gerardo [University of Turabo, School of Engineering, P.O. Box 3030, Gurabo 00778 (Puerto Rico); Peterson, G.P. [University of Colorado at Boulder, 914 Broadway, Boulder, CO 80309 (United States)

    2008-01-15

    A multifunctional sandwich panel combining efficient structural load support and thermal management characteristics has been designed and experimentally assessed. The concept is based upon a truncated, square honeycomb sandwich structure. In closed cell honeycomb structures, the transport of heat from one face to the other occurs by a combination of conduction through the webs and convection/radiation within the cells. Here, much more effective heat transport is achieved by multifunctionally utilizing the core as a heat pipe sandwich panel. Its interior consists of a 6061 aluminum truncated-square honeycomb core covered with a stochastic open-cell nickel foam wick. An electroless nickel plating barrier layer inhibited the chemical reaction between the deionized water working fluid and the aluminum structure, retarding the generation of non-condensable hydrogen gas. A thermodynamic model was used to guide the design of the heat pipe sandwich panel. We describe the results of a series of experiments that validate the operational principle of the multifunctional heat pipe sandwich panel and characterize its transient response to an intense localized heat source. The systems measured thermal response to a localized heat source agrees well with that predicted by a finite difference method model used to predict the thermal response. (author)

  15. Pits, pipes, ponds--and me.

    Science.gov (United States)

    Mara, Duncan

    2013-05-01

    My life in low-cost sanitation and low-cost wastewater treatment and the use of treated wastewater in agriculture and aquaculture really has been 'pits, pipes and ponds' - 'pits' are low-cost sanitation technologies (LCST) such as VIP latrines and pour-flush toilets; 'pipes' are low-cost sewerage, principally condominial (simplified) sewerage; and 'ponds' are low-cost wastewater treatment systems, especially waste stabilization ponds, and the use of treated wastewater in agriculture and aquaculture. 'Pits' were mainly working on World Bank LCST research projects, with fieldwork principally in Zimbabwe, 'pipes' were working on condominial sewerage projects in Brazil and disseminating this LCST to a wider global audience, and 'ponds' were waste stabilization ponds, with fieldwork mainly in Brazil, Colombia, Portugal and the United Kingdom, the development of aerated rock filters to polish facultative-pond effluents, and the human-health aspects of treated wastewater use in agriculture and aquaculture, with fieldwork in Brazil and the UK, and the application of quantitative microbial risk analysis. The paper provides a professional perspective and lessons from historical developments and gives recommended future directions based on my career working on low-cost sanitation technologies and treated wastewater use in agriculture and aquaculture.

  16. Morbidity profile of steel pipe production workers

    Directory of Open Access Journals (Sweden)

    Pandit Kirti

    2008-01-01

    Full Text Available Objective: To study the different morbid conditions among steel pipe producing workers. Methods: The present cross-sectional study has been carried out among the workers of one of the steel pipes and tubes manufacturing factory of Gujarat. Hundred workers from the four major departments of the steel pipe production plant, namely welding, pressing machine, X-ray welding and loading/transportation department were covered. The information regarding demographic, occupational, clinical characteristics and diagnosis were recorded on a pre-designed proforma. Statistical analysis included calculation of percentages and proportions and was carried out using the statistical software Epi Info Version 3.3.2. Results: The mean age of the study subjects was found to be 38.7±7.1 years. The mean duration of exposure was found to be 9.0±3.4 years. Forty-four percent of the subjects had an upper respiratory tract infection, as evidenced by symptoms like dry cough, cough with rhinitis and cough with fever. Symptoms suggestive of allergic bronchitis were observed in 12% of the subjects while symptoms suggestive of heat stress such as prickly heat, dehydration, perspiration and pyrexia were observed in 13% of the subjects.

  17. Determination of leakage areas in nuclear piping

    Energy Technology Data Exchange (ETDEWEB)

    Keim, E. [Siemens/KWU, Erlangen (Germany)

    1997-04-01

    For the design and operation of nuclear power plants the Leak-Before-Break (LBB) behavior of a piping component has to be shown. This means that the length of a crack resulting in a leak is smaller than the critical crack length and that the leak is safely detectable by a suitable monitoring system. The LBB-concept of Siemens/KWU is based on computer codes for the evaluation of critical crack lengths, crack openings, leakage areas and leakage rates, developed by Siemens/KWU. In the experience with the leak rate program is described while this paper deals with the computation of crack openings and leakage areas of longitudinal and circumferential cracks by means of fracture mechanics. The leakage areas are determined by the integration of the crack openings along the crack front, considering plasticity and geometrical effects. They are evaluated with respect to minimum values for the design of leak detection systems, and maximum values for controlling jet and reaction forces. By means of fracture mechanics LBB for subcritical cracks has to be shown and the calculation of leakage areas is the basis for quantitatively determining the discharge rate of leaking subcritical through-wall cracks. The analytical approach and its validation will be presented for two examples of complex structures. The first one is a pipe branch containing a circumferential crack and the second one is a pipe bend with a longitudinal crack.

  18. Fluid structure interaction in piping systems

    Energy Technology Data Exchange (ETDEWEB)

    Svingen, Bjoernar

    1996-12-31

    The Dr. ing. thesis relates to an analysis of fluid structure interaction in piping systems in the frequency domain. The governing equations are the water hammer equations for the liquid, and the beam-equations for the structure. The fluid and structural equations are coupled through axial stresses and fluid continuity relations controlled by the contraction factor (Poisson coupling), and continuity and force relations at the boundaries (junction coupling). A computer program has been developed using the finite element method as a discretization technique both for the fluid and for the structure. This is made for permitting analyses of large systems including branches and loops, as well as including hydraulic piping components, and experiments are executed. Excitations are made in a frequency range from zero Hz and up to at least one thousand Hz. Frequency dependent friction is modelled as stiffness proportional Rayleigh damping both for the fluid and for the structure. With respect to the water hammer equations, stiffness proportional damping is seen as an artificial (bulk) viscosity term. A physical interpretation of this term in relation to transient/oscillating hydraulic pipe-friction is given. 77 refs., 72 figs., 4 tabs.

  19. Stuck pipe: Causes, detection and prevention

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, L.; Jomnes, T. (Schlumberger Cambridge Research (UK)); Belaskie, J.; Orban, J.; Sheppard, M (Anadrill, Sugarland, TX (USA)); Houwen, O.; Jardine, S.; McCann, D. (Sedco Forex, Montrouge (France))

    1991-10-01

    Stuck pipe remains a major headache that demands and is getting industry-wide attention. It costs the oil industry between $200 and $500 million each year, occurs in 15% of wells, and in many cases is preventable. Several operators are making determined efforts to codify the warning signs and to improve communication for all on-site drilling and service company personnel, for which the data gathering ability of a computerized information system is a necessity. Meanwhile, better rig sensors and information systems are providing rig-floor smart'' alarms to help the driller recognize trouble before it gets out of hand. The causes of stuck pipe can be divided broadly among differential sticking, formation-related sticking and mechanical sticking. One of the results of the industry's current attention is a better understanding of the events leading up to stuck pipe and their interpretationn in terms of the causes of sticking. Knowing the causes is essential for taking remedial action. 15 figs., 19 refs.

  20. Vortexons in axisymmetric Poiseuille pipe flows

    CERN Document Server

    Fedele, Francesco

    2012-01-01

    We present a study on the nonlinear dynamics of small long-wave disturbances to the laminar state in non-rotating axisymmetric Poiseuille pipe flows. At high Reynolds numbers, the associated Navier-Stokes equations can be reduced to a set of coupled Korteweg-de Vries-type (KdV) equations that support inviscid and smooth travelling waves numerically computed using the Petviashvili method. In physical space they correspond to localized toroidal vortices concentrated near the pipe boundaries (wall vortexons) or that wrap around the pipe axis (centre vortexons), in agreement with the analytical soliton solutions derived by Fedele (2012). The KdV dynamics of a perturbation is also investigated by means of an high accurate Fourier-based numerical scheme. We observe that an initial vortical patch splits into a centre vortexon radiating patches of vorticity near the wall. These can undergo further splitting leading to a proliferation of centre vortexons that eventually decay due to viscous effects. The splitting proc...

  1. Relaminarisation of fully turbulent flow in pipes

    Science.gov (United States)

    Kuehnen, Jakob; Hof, Bjoern

    2014-11-01

    Drag reduction still remains one of the most alluring applications of turbulence control. We will show that flattening the streamwise velocity profile in pipes can force turbulent flow to decay and become laminar. Two different experimental control schemes are presented: one with a local modification of the flow profile by means of a stationary obstacle and one with a moving wall, where a part of the pipe is shifted in the streamwise direction. Both control schemes act on the flow such that the streamwise velocity profile becomes more flat and turbulence gradually grows faint and disappears. Since, in a smooth straight pipe, the flow remains laminar from that position a reduction in skin friction by a factor of 5 can be accomplished. We will present measurements with high-speed particle image velocimetry, measurements of the pressure drop and videos of the development of the flow during relaminarisation. The guiding fundamental principle behind our approach to control the velocity profile will be explained and discussed.

  2. Turbulent pipe flows subjected to temporal decelerations

    Science.gov (United States)

    Jeong, Wongwan; Lee, Jae Hwa

    2016-11-01

    Direct numerical simulations of temporally decelerating turbulent pipe flows were performed to examine effects of temporal decelerations on turbulence. The simulations were started with a fully developed turbulent pipe flow at a Reynolds number, ReD =24380, based on the pipe radius (R) and the laminar centerline velocity (Uc 0). Three different temporal decelerations were imposed to the initial flow with f= | d Ub / dt | =0.00127, 0.00625 and 0.025, where Ub is the bulk mean velocity. Comparison of Reynolds stresses and turbulent production terms with those for steady flow at a similar Reynolds number showed that turbulence is highly intensified with increasing f due to delay effects. Furthermore, inspection of the Reynolds shear stress profiles showed that strong second- and fourth-quadrant Reynolds shear stresses are greatly increased, while first- and third-quadrant components are also increased. Decomposition of streamwise Reynolds normal stress with streamwise cutoff wavelength (λx) 1 R revealed that the turbulence delay is dominantly originated from delay of strong large-scale turbulent structures in the outer layer, although small-scale motions throughout the wall layer adjusted more rapidly to the temporal decelerations. This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2014R1A1A2057031).

  3. Effect of temperature and pipe material on biofilm formation and survival of Escherichia coli in used drinking water pipes

    DEFF Research Database (Denmark)

    Silhan, J.; Corfitzen, Charlotte B.; Albrechtsen, Hans-Jørgen

    2006-01-01

    Segments of used drinking water pipes of galvanised steel (GS), cross-linked polyethylene (PEX), copper pipes (Cu) or new medium-density polyethylene (PE) were investigated for the formation of biofilm and survival of E coli in biofilm and in the water phase. Pipes were filled with water and incu...... survived longer at both temperatures in the glass control bottles than in the drinking water pipes. Despite the obvious biofilm formation, E coli was not detected in the biofilm at any of the investigated surfaces.......Segments of used drinking water pipes of galvanised steel (GS), cross-linked polyethylene (PEX), copper pipes (Cu) or new medium-density polyethylene (PE) were investigated for the formation of biofilm and survival of E coli in biofilm and in the water phase. Pipes were filled with water...... confirmed the general trends observed by HPC. Higher temperature was seen to be an important factor reducing E coli survival in the water phase in drinking water pipes. At 1 VC E coli survived more than 4 d in GS and Cu pipes and 8 d in PE-pipes, but was not detected after 48 h at 35 degrees C. The E coli...

  4. Environmental and Thermal Performance of District Heating Pipes

    Energy Technology Data Exchange (ETDEWEB)

    Froeling, Morgan

    2002-06-01

    The introduction of district heating has reduced the environmental impact from local heat production in urban areas. However, in order to fit into a sustainable society, district heating must be continuously developed according to the increasing demands on activities in a society moving towards sustainability. Our technical improvements must result in environmental improvements. This thesis focuses on the environmental performance of the distribution system - the district heating pipes. The purpose of this research is to understand how the distribution system can be improved. The information presented in this thesis can be used to identify possibilities for improving the environmental performance of different life cycle phases of the distribution system as well as a baseline when evaluating new technical developments. The heat losses during use of the pipes are of large importance for the environmental impact of district heating pipes. Such heat losses can be modelled if the mass transfer parameters for gases in the polyurethane insulation and the polyethylene casing are known. The diffusion coefficients, the permeability coefficients and the solubility coefficients and their temperature dependence have been determined for cyclopentane, carbon dioxide, nitrogen, and oxygen. The same parameters have been studied for the blowing agent alternative HFC-365mfc at room temperature. The long-term thermal performance of district heating pipes has been modelled using effective permeabilities for the pipe construction. Environmental consequences of heat losses during the use phase of district heating pipes have been compared with the impacts from production of the pipes and from construction of the district heating network. The use of the district heating pipes is the most important of the studied life cycle phases. Thus, it is very important to minimise heat losses from the pipes. The heat losses will for some district heating pipes increase notably during use due to foam

  5. 46 CFR 56.04-2 - Piping classification according to service.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping classification according to service. 56.04-2... PIPING SYSTEMS AND APPURTENANCES Piping Classification § 56.04-2 Piping classification according to... Piping Classification Service Class 1 Pressure (p.s.i.g.) Temp. (°F) Class B and C poisons 2 I any and...

  6. 49 CFR 195.585 - What must I do to correct corroded pipe?

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false What must I do to correct corroded pipe? 195.585... pipe? (a) General corrosion. If you find pipe so generally corroded that the remaining wall thickness... pipe. However, you need not replace the pipe if you— (1) Reduce the maximum operating pressure...

  7. Method for the fabrication of insulated double pipes. Verfahren zum Herstellen von isolierten Doppelrohren

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, H.

    1992-06-11

    The invention describes a method for the fabrication of double-walled insulating pipes which is characterized by the fact that the internal pipe is joined coldly and the external pipe hotly, and the filling material between external and internal pipe guarantees a leakproof tight distance through the shrinkage of the hot external pipe.

  8. 46 CFR 154.524 - Piping joints: Welded and screwed couplings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Welded and screwed couplings. 154.524... Equipment Cargo and Process Piping Systems § 154.524 Piping joints: Welded and screwed couplings. Pipe... warmer. (d) Screwed couplings are allowed for instrumentation and control piping that meets §...

  9. Buckling Response of Pipe-in-Pipe Systems Subjected to Bending

    Institute of Scientific and Technical Information of China (English)

    王哲; 陈志华; 刘红波; 何永禹; 马克俭

    2015-01-01

    The buckling response of pipe-in-pipe(PIP)systems subjected to bending is investigated in this paper. A set of parameterized models are established to explore the bending characteristics of the PIP systems through eigen-value buckling analysis and nonlinear post-buckling analysis. The results show that the length of PIP systems and the height of centralizers are the most significant factors that influence the buckling moment, ultimate bending mo-ment and buckling mode; the other geometric characteristics, such as initial geometric imperfection and friction between centralizers and outer pipes, evidently influence the post-buckling path and ductility of PIPs; the equivalent bending stiffness is dependent on the length and centralizers. Moreover, the range of equivalent bending stiffness is also discussed.

  10. A thermal study of pipes with outer transverse fins

    Directory of Open Access Journals (Sweden)

    S. Gil

    2016-10-01

    Full Text Available This paper provides results of thermal investigations on pipes with outer transverse fins produced by placing a strip, being a form of helical spring which functions as a radiator, on the basis pipe. The investigations were carried out at the facility that enables measurements with respect to both natural and forced convection. Performance of the investigated pipes was assessed in relation to a non-finned pipe and a pipe welded with the use of Metal Active Gas (MAG technology. The experiments have shown that the finned pipe welding technology does not markedly affect their thermal efficiency, which has been confirmed by performed model calculations, while the welding technology has a crucial impact on their operating performance.

  11. Thermal Analysis of Heat Pipe Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Senthilkumar R

    2010-04-01

    Full Text Available The heat pipe is a novel heat transfer device to transfer large amount of heat through a small cross sectional area with very small temperature differences and it also posses high thermal conductance and low thermal impedance. In this paper, the heat pipe working parameters are analyzed using Taguchi methodology. The Taguchimethod is used to formulate the experimental work, analyze the effect of working parameters of the heat pipe and predict the optimal parameter of heat pipe such as heat input, inclination angle and flow rate. It is found that these parameters have a significant influence on heat pipe performance. The analysis of the Taguchi method reveals that, all the parameters mentioned above have equal contributions in the performance of heat pipe efficiency, thermal resistance and overall heat transfer coefficient. Experimental results are provided to validate the suitability of the proposed approach.

  12. Impact of working fluids on gravitational heat pipe performance

    Science.gov (United States)

    Jobb, Marián; Kosa, Ľuboš; Nosek, Radovan; Malcho, Milan

    2016-06-01

    Performance heat pipes depends on several parameters. This article deals with the performance of heat pipes, depending on the working fluid and operating temperature. There is described the essential function of the heat pipe manufacturing process. Stainless heat pipes were made of material AISI 304 and filled with a distilled water and solution of distilled water with silver nitrate, up to 20% of the heat pipe inner volume. Measurements were carried at an operating temperature of 40 °C to 90 °C. The performance was measured on the experimental device. Presented results show the progress of individual measurements and the effect of operating parameters and working fluid on the performance of heat pipes.

  13. Research on Oil/Gas In-pipe Inspection Robot

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A new type of in-pipe mobile robot was designed and developed on the basis of wheel in-pipe robot and crawler in-pipe robot. The three sets of driving wheels circumferentially 120° apart in the cross section, both front and rear driving wheels are distributed on the same parallelogram mechanism. The driving motor drives the three sets of driving wheels by worm couple, the regulating motor makes the three sets of driving wheels push against the pipe inwall with stable and adequate pressing force by the ball screw pair and pressure sensor, so the in-pipe robot can provide adequate and stable traction force. The robot mechanism is simple and small in size and work reliably. It is particularly suitable to the pipe with diameter 400~650 mm.

  14. In-Orbit Construction with a Helical Seam Pipe Mill

    Science.gov (United States)

    Gilhooley, N.

    The challenges of building large structures in space, and in particular a torus habitat, require novel processes. One potential method is to manufacture helical seam (also called spiral) pipe in orbit using a pipe mill. These machines turn rolls of steel or alloy into fully formed, welded and inspected pipe, pressure vessels and silos of various diameters. Pipe mills are highly automated and efficient in a factory environment and are increasingly being used for in-situ repair. By constructing in-orbit (on-orbit assembly) the launch vehicle can supply full payloads of compact, robust rolls of material; and the installation design is less restricted by fairing constraints and modular limitations. The use of a pipe mill is discussed as a possible construction method, for comparison an example design envelope is shown and further pipe mill products are considered.

  15. EXPERIMENTAL STUDY OF LOAD SENSING SYSTEM WITH LONG PIPES

    Institute of Scientific and Technical Information of China (English)

    Kong Xiaowu; Qiu Minxiu; Wei Jianhua

    2005-01-01

    A test platform is established as per the practical working condition of elevating platform fire truck. The influences of pipes and load on dynamic characteristics of load-sensing system are studied by series of step response experiments. Experimental results show that the feedback pipe makes the most important influence on the dynamic response speed of load-sensing system. Its internal diameter should be optimized for given length of pipe. On the other hand, the stability of load-sensing pump is improved as the length of input pipe increases in a certain range. The influence of input pipe on the dynamic response speed is caused mainly by the pressure-wave travel time in the input pipe.

  16. Biplastic pipes for high-pressure oil pipeline systems

    Science.gov (United States)

    Anoshkin, A. N.; Tashkinov, A. A.; Larionov, A. F.; Pospelov, A. B.

    2000-05-01

    A high-performance, corrosion-resistant biplastic pipe for high-pressure oil pipeline systems is presented. The pipe combines an outer load-carrying layer formed from unidirectionally glass-reinforced plastic (GRP) sublayers by wet multi-circuit winding and an inner sealing layer of high-density polyethylene. Both demountable and permanent joints, tees, and other parts are constructed for these pipes. The biplastic pipes ensure reliable operation of oil pipeline systems under a pressure of up to 200 bar. The experimental results and calculated estimates of the strength of biplastic pipes are presented. The results of using these pipes in oil pipeline systems in the Perm' region are discussed.

  17. Development of a jet pump-assisted arterial heat pipe

    Science.gov (United States)

    Bienert, W. B.; Ducao, A. S.; Trimmer, D. S.

    1977-01-01

    The development of a jet pump assisted arterial heat pipe is described. The concept utilizes a built-in capillary driven jet pump to remove vapor and gas from the artery and to prime it. The continuous pumping action also prevents depriming during operation of the heat pipe. The concept is applicable to fixed conductance and gas loaded variable conductance heat pipes. A theoretical model for the jet pump assisted arterial heat pipe is presented. The model was used to design a prototype for laboratory demonstration. The 1.2 m long heat pipe was designed to transport 500 watts and to prime at an adverse elevation of up to 1.3 cm. The test results were in good agreement with the theoretical predictions. The heat pipe carried as much as 540 watts and was able to prime up to 1.9 cm. Introduction of a considerable amount of noncondensible gas had no adverse effect on the priming capability.

  18. Analysis and Optimisation of Carcass Production for Flexible Pipes

    DEFF Research Database (Denmark)

    Nielsen, Peter Søe

    on reels. Flexible pipes are constructed in a layer structure in which each layer adds specific properties to the pipe such as; collapse strength, fluid integrity, bursting strength, tensile strength etc. The inner-most layer of a flexible pipe is the carcass; a flexible interlocking stainless steel......Un-bonded flexible pipes are used in the offshore oil and gas industry worldwide transporting hydrocarbons from seafloor to floating production vessels topside. Flexible pipes are advantageous over rigid pipelines in dynamic applications and during installation as they are delivered in full length...... structure that provides mechanical and collapse strength for the flexible pipe. The manufacturing process of carcass is a combination of roll forming stainless steel strips and helical winding the profiles around a mandrel interlocking the profiles with themselves. The focus of the present project...

  19. 46 CFR 34.15-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.15-15 Section 34.15-15 Shipping COAST... Systems, Details § 34.15-15 Piping—T/ALL. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds p.s.i. (b) All piping, in nominal sizes not over 3/4-inch shall...

  20. Robotic platform for traveling on vertical piping network

    Science.gov (United States)

    Nance, Thomas A; Vrettos, Nick J; Krementz, Daniel; Marzolf, Athneal D

    2015-02-03

    This invention relates generally to robotic systems and is specifically designed for a robotic system that can navigate vertical pipes within a waste tank or similar environment. The robotic system allows a process for sampling, cleaning, inspecting and removing waste around vertical pipes by supplying a robotic platform that uses the vertical pipes to support and navigate the platform above waste material contained in the tank.

  1. 49 CFR 192.315 - Wrinkle bends in steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Wrinkle bends in steel pipe. 192.315 Section 192... Transmission Lines and Mains § 192.315 Wrinkle bends in steel pipe. (a) A wrinkle bend may not be made on steel pipe to be operated at a pressure that produces a hoop stress of 30 percent, or more, of SMYS. (b) Each...

  2. Novel Robotic Tools for Piping Inspection and Repair

    Science.gov (United States)

    2015-01-14

    motion. This in-pipe motion is accomplished by the use of inflatable pneumatic annular grippers in concert with a novel flexible pneumatic linear ...actuator capable. This linear actuator is capable of actuation while bent to conform to the contours of a piping system. The flexible linear actuator...robotic tool is based on pneumatically actuated peristaltic motion. This in-pipe motion is accomplished by the use of inflatable pneumatic annular

  3. Dynamics of fluid-conveying pipes: effects of velocity profiles

    DEFF Research Database (Denmark)

    Enz, Stephanie; Thomsen, Jon Juel

    Varying velocity profiles and internal fluid loads on fluid-conveying pipes are investigated. Different geometric layouts of the fluid domain and inflow velocity profiles are considered. It is found that the variation of the velocity profiles along the bended pipe is considerable. A determination...... of the resulting fluid loads on the pipe walls is of interest e.g, for evaluating the dynamical behaviour of lightly damped structures like Coriolis flow meters....

  4. Closing LHCb's calorimeter around the beam-pipe

    CERN Multimedia

    Kristic, R

    2008-01-01

    Photos 1 and 2 show the pre-shower, lead absorber and the scintillating pad detector layers moving in towards the beam-pipe. Photos 3,4 and 5 show the hadron calorimeter with both halves closed around the beam-pipe, to the left of the picture and, in the centre, half of the electromagnetic calorimeter closed in towards the beam-pipe.

  5. Analysis of superheater's pipe wall overtemperature by fault tree diagnose

    Institute of Scientific and Technical Information of China (English)

    盛德仁; 任浩仁; 陈坚红; 李蔚

    2002-01-01

    After research on a 2000t/h subcritical forced-circulation balanced v entilation were applied boiler and the structure and operation of its auxiliary system builds up this heat transfer model of a superheater's pipe wall and analy ze the effect of primary factors on the overtemperature of the pipe wall. Fault tree structure was used to uncover the multiplayer logic between the overtempera ture of the superheater's pipe wall and the faults.

  6. Some Unresolved Issues in Ocean Pipes Aspirating Fluid

    Institute of Scientific and Technical Information of China (English)

    QIAN Qin; WANG Lin; NI Qiao; HUANG Yu-ying

    2008-01-01

    This paper reviews the dynamics of ocean pipes aspirating fluid and presents a selective review of the research undertaken on it. It focuses on the equations of motion, fluid-solid interaction at the inlet of the free end of the pipe, the stability mechanism of pipes aspirating steady fluid, etc. In particular, some unresolved or partly resolved issues on these important aspects are discussed. Finally, the promising future development in this area is discussed.

  7. Surface Hardness of Friction Stir Welded AA6063 Pipe

    OpenAIRE

    Ismail Azman; Awang Mokhtar

    2014-01-01

    The external surface hardness of friction stir welded aluminum alloy 6063 pipe joint was investigated in this paper. The 89mm of outside diameter pipe with 5mm of wall thickness was used as test pipe piece for this experiment on closed butt joint configuration by utilising Bridgeport 2216 CNC milling machine and orbital clamping unit specially designed to cater for this task and function. Several welded samples were produced on varying process parameters which were successfully joined by usin...

  8. TRANSIENT RESPONSE OF A VALVE CONTROL HYDRAULIC SYSTEM WITHLONG PIPES

    Institute of Scientific and Technical Information of China (English)

    Wei Jianhua; Kong Xiaowu; Qiu Minxiu; Wu Genmao

    2004-01-01

    The simulation model of a valve control hydraulic system with long pipe is established in Simulink4.0, and then the step responses of the systems with difference pipe parameters are investigated by simulation.Simulation results show that the long pipes will slow down the step response of system and make it fluctuate periodically.The results of simulation conform to the results of experiment on the whole, which proves the mathematic model is correct.

  9. Predictions for fatigue crack growth life of cracked pipes and pipe welds using RMS SIF approach and experimental validation

    Energy Technology Data Exchange (ETDEWEB)

    Arora, Punit, E-mail: punit@barc.gov.in [Bhabha Atomic Research Centre, Department of Atomic Energy, Maharashtra, Mumbai 400 085 (India); Singh, P.K.; Bhasin, Vivek; Vaze, K.K.; Ghosh, A.K. [Bhabha Atomic Research Centre, Department of Atomic Energy, Maharashtra, Mumbai 400 085 (India); Pukazhendhi, D.M.; Gandhi, P.; Raghava, G. [Structural Engineering Research Centre, Chennai 600 113 (India)

    2011-10-15

    The objective of the present study is to understand the fatigue crack growth behavior in austenitic stainless steel pipes and pipe welds by carrying out analysis/predictions and experiments. The Paris law has been used for the prediction of fatigue crack growth life. To carry out the analysis, Paris constants have been determined for pipe (base) and pipe weld materials by using Compact Tension (CT) specimens machined from the actual pipe/pipe weld. Analyses have been carried out to predict the fatigue crack growth life of the austenitic stainless steel pipes/pipes welds having part through cracks on the outer surface. In the analyses, Stress Intensity Factors (K) have been evaluated through two different schemes. The first scheme considers the 'K' evaluations at two points of the crack front i.e. maximum crack depth and crack tip at the outer surface. The second scheme accounts for the area averaged root mean square stress intensity factor (K{sub RMS}) at deepest and surface points. Crack growth and the crack shape with loading cycles have been evaluated. In order to validate the analytical procedure/results, experiments have been carried out on full scale pipe and pipe welds with part through circumferential crack. Fatigue crack growth life evaluated using both schemes have been compared with experimental results. Use of stress intensity factor (K{sub RMS}) evaluated using second scheme gives better fatigue crack growth life prediction compared to that of first scheme. Fatigue crack growth in pipe weld (Gas Tungsten Arc Welding) can be predicted well using Paris constants of base material but prediction is non-conservative for pipe weld (Shielded Metal Arc Welding). Further, predictions using fatigue crack growth rate curve of ASME produces conservative results for pipe and GTAW pipe welds and comparable results for SMAW pipe welds. - Highlights: > Predicting fatigue crack growth of Austenitic Stainless Steel pipes and pipe welds. > Use of RMS-SIF and

  10. Heat losses through pipe connections in hot water stores

    DEFF Research Database (Denmark)

    Andersen, Elsa; Fan, Jianhua; Furbo, Simon

    2007-01-01

    loss from an ideally insulated pipe connected to the top of a hot water tank is mainly due to a natural convection flow in the pipe, that the heat loss coefficient of pipes connected to the top of a hot water tank is high, and that a heat trap can reduce the heat loss coefficient significantly. Further......The heat loss from pipe connections at the top of hot water storage tanks with and without a heat trap is investigated theoretically and compared to similar experimental investigations. Computational Fluid Dynamics (CFD) is used for the theoretical analysis. The investigations show that the heat...

  11. Small, Untethered, Mobile Robots for Inspecting Gas Pipes

    Science.gov (United States)

    Wilcox, Brian

    2003-01-01

    Small, untethered mobile robots denoted gas-pipe explorers (GPEXs) have been proposed for inspecting the interiors of pipes used in the local distribution natural gas. The United States has network of gas-distribution pipes with a total length of approximately 109 m. These pipes are often made of iron and steel and some are more than 100 years old. As this network ages, there is a need to locate weaknesses that necessitate repair and/or preventive maintenance. The most common weaknesses are leaks and reductions in thickness, which are caused mostly by chemical reactions between the iron in the pipes and various substances in soil and groundwater. At present, mobile robots called pigs are used to inspect and clean the interiors of gas-transmission pipelines. Some carry magnetic-flux-leakage (MFL) sensors for measuring average wall thicknesses, some capture images, and some measure sizes and physical conditions. The operating ranges of pigs are limited to fairly straight sections of wide transmission- type (as distinguished from distribution- type) pipes: pigs are too large to negotiate such obstacles as bends with radii comparable to or smaller than pipe diameters, intrusions of other pipes at branch connections, and reductions in diameter at valves and meters. The GPEXs would be smaller and would be able to negotiate sharp bends and other obstacles that typically occur in gas-distribution pipes.

  12. Heat losses through pipe connections in hot water stores

    DEFF Research Database (Denmark)

    Andersen, Elsa; Fan, Jianhua; Furbo, Simon

    2007-01-01

    loss from an ideally insulated pipe connected to the top of a hot water tank is mainly due to a natural convection flow in the pipe, that the heat loss coefficient of pipes connected to the top of a hot water tank is high, and that a heat trap can reduce the heat loss coefficient significantly. Further......The heat loss from pipe connections at the top of hot water storage tanks with and without a heat trap is investigated theoretically and compared to similar experimental investigations. Computational Fluid Dynamics (CFD) is used for the theoretical analysis. The investigations show that the heat...

  13. Long time durability tests of fabric inlet stratification pipes

    DEFF Research Database (Denmark)

    Andersen, Elsa; Furbo, Simon

    2008-01-01

    The long time durability of seven different two layer fabric inlet stratification pipes for enhancing thermal stratification in hot water stores is investigated experimentally. Accelerated durability tests are carried out with the inlet stratification pipes both in a domestic hot water tank...... and that this destroys the capability of building up thermal stratification for the fabric inlet stratification pipe. The results also show that although dirt, algae etc. are deposited in the fabric pipes in the space heating tank, the capability of the fabric inlet stratifiers to build up thermal stratification...

  14. Water-pipe smoking among North American youths.

    Science.gov (United States)

    Dugas, Erika; Tremblay, Michèle; Low, Nancy C P; Cournoyer, Daniel; O'Loughlin, Jennifer

    2010-06-01

    The objectives of this analysis were to identify the sociodemographic characteristics of water-pipe users in a North American context and to describe concurrent psychoactive substance use. Data on sociodemographic characteristics, water-pipe smoking, and use of other psychoactive substances were collected in 2007 through mailed self-report questionnaires completed by 871 young adults, 18 to 24 years of age, who were participating in the Nicotine Dependence in Teens Study, a longitudinal investigation of the natural history of nicotine dependence among adolescents in Montreal, Canada. Independent sociodemographic correlates of water-pipe use were identified in multivariate logistic regression analyses. Previous-year water-pipe use was reported by 23% of participants. Younger age, male gender, speaking English, not living with parents, and higher household income independently increased the odds of water-pipe use. Water-pipe use was markedly higher among participants who had smoked cigarettes, had used other tobacco products, had drunk alcohol, had engaged in binge drinking, had smoked marijuana, or had used other illicit drugs in the previous year. Water-pipe users may represent an advantaged group of young people with the leisure time, resources, and opportunity to use water-pipes. Evidence-based public health and policy interventions are required to equip the public to make informed decisions about water-pipe use.

  15. Entropy generation analysis of cylindrical heat pipe using nanofluid

    Energy Technology Data Exchange (ETDEWEB)

    Ghanbarpour, Morteza, E-mail: morteza.ghanbarpour@energy.kth.se; Khodabandeh, Rahmatollah

    2015-06-20

    Highlights: • Entropy generation of heat pipe with nanofluid has been studied. • Nanofluid has significant effect on heat pipe performance. • Entropy generation in heat pipe decreases when nanofluids are used as working fluids. - Abstract: Thermal performance of cylindrical heat pipe with nanofluid is studied based on the laws of thermodynamics. The objective of the present work is to investigate nanofluids effect on different sources of entropy generation in heat pipe caused by heat transfer between hot and cold reservoirs and also frictional losses and pressure drop in the liquid and vapor flow along heat pipe. An analytical study was performed to formulate all sources of entropy generation and the predicted results are compared with experimental ones. Cylindrical miniature grooved heat pipes of 250 mm length and 6.35 mm outer diameter were fabricated and tested with distilled water and water based TiO{sub 2} and Al{sub 2}O{sub 3} nanofluids at different concentrations as working fluids. Analytical and experimental results revealed that the entropy generation in heat pipes decreases when nanofluids are used as working fluids instead of basefluid which results in improved thermal performance of the heat pipes with nanofluids.

  16. Heat pipes for spacecraft temperature control: Their usefulness and limitations

    Science.gov (United States)

    Ollendorf, S.; Stipandic, E.

    1972-01-01

    Heat pipes are used in spacecraft to equalize the temperature of structures and maintain temperature control of electronic components. Information is provided for a designer on: (1) a typical mounting technique, (2) choices available in wick geometries and fluids, (3) tests involved in flight-qualifying the design, and (4) heat pipe limitations. An evaluation of several heat pipe designs showed that the behavior of heat pipes at room temperature does not necessarily correlate with the classic equations used to predict their performance. They are sensitive to such parameters as temperature, fluid inventory, orientation, and noncondensable gases.

  17. Development of heat pipes for solar water heaters

    Energy Technology Data Exchange (ETDEWEB)

    Akyurt, M.

    1984-01-01

    Numerous heat pipes were designed, manufactured, and filled on a specially developed filling rig. Each heat pipe was incorporated into a prototype solar water heater developed for this purpose, and was tested under actual insolation conditions. An extensive testing program lasting for more than a year revealed that the heat pipes perform satisfactorily as heat transfer elements in solar water heaters. A special heat pipe featuring a compact and effective condenser configuration was also tested. It was observed to likewise exhibit isothermal behavior and hence promised potential for large scale solar applications.

  18. Pressure Controlled Heat Pipe for Precise Temperature Control Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research project will develop Pressure Controlled Heat Pipes (PCHPs) for precise temperature control (milli-Kelvin level). Several...

  19. Study on Varying Metallic Properties of Straight and Elbow Pipes of Main Steam Piping after Long-Time Service

    Institute of Scientific and Technical Information of China (English)

    Shen Hongsheng; Lin Zhongyuan; Duan Xuzhen

    2005-01-01

    The mechanic properties, lasting strength and microstructural properties of straight and elbow pipesof 12CrMo, 10CrMo910 and 12CrlMoV low alloy steel main steam piping system after long-time service weretested and studied. The testing results showed that, for straight and elbow pipes of mainsteam piping under theconditions of high temperature and high pressure, the numerical operating performance indexes of their metalchanged with little difference, generally both within 5%, and the Values of elbow were higher than those ofstraight pipes. These phenomena proved that the aging processes of pipe metal at different positions are thesame. And the cause for higher numerical performance indexes of elbow and higher failure rate at elbow posi-tion during operation of steam pipes were investigated.

  20. Failure rates in Barsebaeck-1 reactor coolant pressure boundary piping. An application of a piping failure database

    Energy Technology Data Exchange (ETDEWEB)

    Lydell, B. [RSA Technologies, Vista, CA (United States)

    1999-05-01

    This report documents an application of a piping failure database to estimate the frequency of leak and rupture in reactor coolant pressure boundary piping. The study used Barsebaeck-1 as reference plant. The study tried two different approaches to piping failure rate estimation: 1) PSA-style, simple estimation using Bayesian statistics, and 2) fitting of statistical distribution to failure data. A large, validated database on piping failures (like the SKI-PIPE database) supports both approaches. In addition to documenting leak and rupture frequencies, the SKI report describes the use of piping failure data to estimate frequency of medium and large loss of coolant accidents (LOCAs). This application study was co sponsored by Barsebaeck Kraft AB and SKI Research 41 refs, figs, tabs

  1. Influência da proporção arroz:soja sobre a solubilidade e as propriedades espumantes dos mingaus desidratados Effect of rice-soybean proportion on solubility and whipping properties of dehydrated porridges

    Directory of Open Access Journals (Sweden)

    Sin H. WANG

    2000-04-01

    Full Text Available Para verificar a possibilidade do uso dos mingaus desidratados elaborados com arroz e soja em diferentes proporções (100:0, 90:10, 80:20, 70:30, 60:40 e 50:50% em produtos alimentícios, foram estudadas a solubilidade e as propriedades espumantes destes. No processo para a obtenção destes mingaus desidratados, foram seguidas as etapas de decorticagem dos grãos de soja, branqueamento, desintegração de arroz e soja branqueados, homogeneização e secagem por atomização. Através das análises, foi verificado que com as crescentes proporções de soja houve um aumento do nitrogênio solúvel em água, do índice de solubilidade de nitrogênio, da proteína dispersível em água, do índice de dispersibilidade de proteína, da expansão de espuma e da sinérese, bem como uma diminuição no volume de espuma após 30 e 60 min. Contudo, os valores de índice de solubilidade de nitrogênio só foram relevantes nos mingaus desidratados contendo mais de 10% de soja, enquanto que os valores de propriedades espumantes não foram altos em nenhum mingau desidratado estudado. Portanto, os mingaus desidratados contendo respectivamente 80:20, 70:30, 60:40 e 50:50% de arroz:soja, são recomendados para o uso em mingaus, bebidas, sopas e molhos, onde não é conveniente a presença de espuma. A atividade residual do inibidor de tripsina não foi detectada nos mingaus desidratados estudados.Dehydrated rice-soybean porridges at different proportions (100:0, 90:10, 80:20, 70:30, 60:40 and 50:50% were assessed for solubility and whipping properties, in order to verify their use as food ingredients. Dehydrated porridge was manufactured by soybean seed dehulling, blanching, disintegration of blanched rice and soybean, homogenization and spray drying. Chemical analysis showed that increasing soybean proportion from 0 to 50%, resulted in an increase in the soluble nitrogen in water, nitrogen solubility index (NSI, dispersible protein in water, protein

  2. Procedure for the Selection of Maximum Pipe Thickness for Efficient Thermal Insulation in Piping with Steam Trace

    Directory of Open Access Journals (Sweden)

    Amauris Gilbert-Hernández

    2016-05-01

    Full Text Available A procedure for the selection of maximum pipe thickness to achieve efficient thermal insulation in piping with steam tracing was developed. The bibliographical review allowed identifying the limitations of previous investigations with regard to the selection of pipe thickness in transfer systems with steam tracing. The model for calculating the overall lost heat was prepared. The procedure considers economic criteria for the selection of pipe thickness and established an optimal thickness value which guarantees a total minimum cost by establishing a balance between the expenditures resulting from heat loss and the project costs.

  3. Effect on mechanical properties of glass reinforced epoxy (GRE) pipe filled with different geopolymer filler molarity for piping application

    Science.gov (United States)

    Hashim, M. F. Abu; Abdullah, M. M. A.; Ghazali, C. M. R.; Hussin, K.; Binhussain, M.

    2017-04-01

    This study investigated the use of a novel white clay geopolymer as a filler to produce high strength glass reinforced epoxy pipe. It was found that using white clay geopolymer as filler gives better compressive strength to the glass reinforced epoxy pipe. The disadvantages of current glass reinforced epoxy pipes such low compressive strength which can be replaced by the composite pipes. Geopolymerization is an innovative technology that can transform several aluminosilicate materials into useful products called geopolymers or inorganic polymers. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled with 10 - 40 weight percentages white clay geopolymer filler with 4 Molarity and 8 Molarity were prepared. Morphology of white clay geopolymer filler surface was indicates using scanning electron microscopy. The additions of white clay geopolymer filler for both 4 Molarity and 8 Molarity show higher compressive strength than glass reinforced epoxy pipe without any geopolymer filler. The compressive test of these epoxy geopolymer pipe samples was determined using Instron Universal Testing under compression mode. Nonetheless, the compressive strength of glass reinforced epoxy pipe with white clay geopolymer filler continues to drop when added to 40 wt% of the geopolymer filler loading for both 4 Molarity and 8 Molarity. These outcomes showed that the mixing of geopolymer materials in epoxy system can be attained in this research.

  4. Absorção de gordura, solubilidade e propriedades espumantes dos extratos hidrossolúveis desidratados de arroz e soja Fat absorption, solubility and whipping properties of dehydrated aqueous extracts of rice-soybean

    Directory of Open Access Journals (Sweden)

    Sin H. WANG

    2000-08-01

    Full Text Available Foram estudadas absorção de gordura (AG, índice de solubilidade em água (ISA e propriedades espumantes dos extratos hidrossolúveis desidratados elaborados com arroz e soja em diferentes proporções (100:0, 90:10, 80:20, 70:30, 60:40 e 50:50, com o objetivo de verificar a possibilidade de uso em produtos alimentícios. Os processos utilizados para a obtenção foram: maceração do arroz e da soja, desintegração, centrifugação, adição de ácido cítrico, fervura e secagem por atomização. Nas determinações, observou-se que houve um aumento na AG, no ISA e na sinérese de espuma, porém uma diminuição na expansão e no volume de espuma com o aumento das proporções de soja.Dehydrated aqueous extracts of rice-soybean at different proportions(100:0, 90:10, 80:20, 70:30, 60:40 e 50:50 were assessed for fat absorption (FA, water solubility index (WSI and whipping properties in order to verify their potential use as food ingredients. Dehydrated aqueous extract was manufactured by soaking, disintegration, centrifugation, addition of citric acid, boiling and spray-drying. The results indicated that increasing soybean proportions from 0 to 50% caused an increase in FA, WSI and foam syneresis, but a decrease in expansion and in volume of foam.

  5. Fracture mechanics models developed for piping reliability assessment in light water reactors: piping reliability project

    Energy Technology Data Exchange (ETDEWEB)

    Harris, D.O.; Lim, E.Y.; Dedhia, D.D.; Woo, H.H.; Chou, C.K.

    1982-06-01

    The efforts concentrated on modifications of the stratified Monte Carlo code called PRAISE (Piping Reliability Analysis Including Seismic Events) to make it more widely applicable to probabilistic fracture mechanics analysis of nuclear reactor piping. Pipe failures are considered to occur as the result of crack-like defects introduced during fabrication, that escape detection during inspections. The code modifications allow the following factors in addition to those considered in earlier work to be treated: other materials, failure criteria and subcritical crack growth characteristic; welding residual and vibratory stresses; and longitudinal welds (the original version considered only circumferential welds). The fracture mechanics background for the code modifications is included, and details of the modifications themselves provided. Additionally, an updated version of the PRAISE user's manual is included. The revised code, known as PRAISE-B was then applied to a variety of piping problems, including various size lines subject to stress corrosion cracking and vibratory stresses. Analyses including residual stresses and longitudinal welds were also performed.

  6. Magnet Fall inside a Conductive Pipe: Motion and the Role of the Pipe Wall Thickness

    Science.gov (United States)

    Donoso, G.; Ladera, C. L.; Martin, P.

    2009-01-01

    Theoretical models and experimental results are presented for the retarded fall of a strong magnet inside a vertical conductive non-magnetic tube. Predictions and experimental results are in good agreement modelling the magnet as a simple magnetic dipole. The effect of varying the pipe wall thickness on the retarding magnetic drag is studied for…

  7. Research and Development on Heat Pipes and Related Thermal Engineering Technologies in Japan

    OpenAIRE

    OSHIMA, Koichi

    1989-01-01

    Five advanced heat pipe systems utilizing phase changing heat transfer concept are introduced, which are; a separate type heat pipe heat exchanger, a heat pipe turbine, micro heat pipes, a thermocapillary loop system and mass-produced tubes with inner fin. Inside of these heat pipes, contrary to the conventional heat transfer tubes, evaporation and condensation processes are heavily influenced by the surface tension effect. This effect is also dominant in the heat pipes operating under micro-...

  8. Sparsity based defect imaging in pipes using guided waves

    Science.gov (United States)

    Golato, Andrew; Santhanam, Sridhar; Ahmad, Fauzia; Amin, Moeness G.

    2016-05-01

    Pipes are used for the transport of fluids and gases in urban and industrial settings, such as buried pipelines to transport water, oil, and other resources. To ensure reliable operation, it is essential that an inspection system be in place to identify and localize damage/defects in the pipes. Unfortunately, many of the typical nondestructive evaluation techniques are inadequate due to limited pipe access; often, only the beginning and end sections of the pipe are physically accessible. As such, this problem is well suited to the use of ultrasonic guided-wave based structural health monitoring. With a limited number of transducers, ultrasonic guided waves can be used to interrogate long lengths of pipes. In this paper, we propose a damage detection and localization scheme that relies upon the inherent sparsity of defects in the pipes. A sparse array of transducers, deployed in accessible areas of the pipes, is utilized in pitch-catch mode to record signals scattered by defects in the pipe. Both the direct path scattering off the defect, and the helical modes, which are paths that spiral around the circumference of the pipe before or after interaction with the defect, are recorded. A Lamb wave based signal model is formulated that accounts for this multipath approach. The signal model is then inverted via group sparse reconstruction, in order to produce an image of the scene. The model accounts for the specificities of Lamb wave propagation through the pipe. Performance validation of the proposed approach is provided using simulated data for an aluminum pipe.

  9. High heat flux loop heat pipes

    Science.gov (United States)

    North, Mark T.; Sarraf, David B.; Rosenfeld, John H.; Maidanik, Yuri F.; Vershinin, Sergey

    1997-01-01

    Loop Heat Pipes (LHPs) can transport very large thermal power loads, over long distances, through flexible, small diameter tubes and against high gravitational heads. While recent LHPs have transported as much as 1500 W, the peak heat flux through a LHP's evaporator has been limited to about 0.07 MW/m2. This limitation is due to the arrangement of vapor passages next to the heat load which is one of the conditions necessary to ensure self priming of the device. This paper describes work aimed at raising this limit by threefold to tenfold. Two approaches were pursued. One optimized the vapor passage geometry for the high heat flux conditions. The geometry improved the heat flow into the wick and working fluid. This approach also employed a finer pored wick to support higher vapor flow losses. The second approach used a bidisperse wick material within the circumferential vapor passages. The bidisperse material increased the thermal conductivity and the evaporative surface area in the region of highest heat flux, while providing a flow path for the vapor. Proof-of-concept devices were fabricated and tested for each approach. Both devices operated as designed and both demonstrated operation at a heat flux of 0.70 MW/m2. This performance exceeded the known state of the art by a factor of more than six for both conventional heat pipes and for loop heat pipes using ammonia. In addition, the bidisperse-wick device demonstrated boiling heat transfer coefficients up to 100,000 W/m2.K, and the fine pored device demonstrated an orientation independence with its performance essentially unaffected by whether its evaporator was positioned above, below or level with the condenser.

  10. Flow accelerated corrosion study in feeder pipes

    Energy Technology Data Exchange (ETDEWEB)

    Goyal, P.; Verma, V.; Singh, R.K. [Bhabha Atomic Research Centre, Mumbai (India). Reactor Safety Div.

    2014-11-15

    The Indian Pressurized Heavy Water Reactor (PHWR) core consists of a number of horizontal channels containing nuclear fuel bundles. Parallel coolant channels are connected to Inlet and Outlet header through feeder pipes. Coolant from Reactor Inlet Header is distributed to the coolant channels and after removing heat combines at Reactor Outlet Header. Due to space constraints the feeder pipes are joined to the channel with one or two elbows close to the end fittings of the coolant channels. The carbon steel feeder pipes carry high temperature fluid at higher velocity and are liable to undergo Flow Accelerated Corrosion (FAC). In the recent inspection it has been found that feeders having double elbow are more susceptible to FAC on the intrados of second elbow. But it was found that in some of the elbows maximum thinning due to FAC was observed on the intrados of the first elbow. Hence to resolve this, effect of first bend orientation with respect of upstream direction has been studied. Two different approaches are used for predicting the FAC rate from calculated value of wall shear stress by CFD. One method is based on evaluating of wear rate using Colburn analogy and the other using an empirical equation between wear rate and shear stress. In Colburn analogy, mass transfer coefficient is evaluated by knowing shear stress and equilibrium concentration. For a case study, wall shear stress obtained from k-ε turbulence model was compared with k-ω SST turbulence model and no appreciable change in the wall shear stress has been found. Hence for subsequent analysis k-ε turbulence model was chosen because large mesh size near to the surface (first layer thickness) is permitted due to higher y{sup +} value.

  11. Polyurethane coating for ductile iron pipes

    Directory of Open Access Journals (Sweden)

    WANG En-qing

    2006-05-01

    Full Text Available A special polyurethane coating designed for ductile iron pipe was developed. The effects of the ingredients on properties, such as viscosity, flow leveling, solidification-rate, adhesion and hardness, were researched. It was then analyzed in what ways the technical parameters, such as temperature and pressure, influence the coat quality. The results showed that the molar ratio and synthesizing conditions must be strictly controlled to obtain suitable pre-polymer viscosity by adjusting the formula ratio of the B component, satisfactory mechanical properties and cure rate can be obtained and bubbles in the coat can be avoided.

  12. Volcanic Pipe of the Namuaiv Mountain

    Directory of Open Access Journals (Sweden)

    Vladimir K. Karzhavin

    2011-12-01

    Full Text Available This research was aimed at reconstructing thermodynamic conditions required for the studied mineral assemblages to be created and exist in nature. The results of the investigations confirm to the recent ideas about an important, even leading, role of temperature, pressure and dioxide carbon in diamond formation in volcanic pipers. The results of this theoretical research allows assuming that one of the reasons for the absence of diamonds in the Namuaiv Mountain volcanic pipe may lie in the increased content of water and oxidizing environmental conditions of their formation

  13. Power source for wireless sensors in pipes

    Science.gov (United States)

    Keddis, Sherif; Schwesinger, Norbert

    2016-04-01

    In this paper, we present investigations on wireless sensors for fluid control inside a pipe. Autarkic sensors are in the technical trend. They are typically connected with a transceiver unit for data transmission. Sensors usually need a lower amount of energy than data transceivers. Therefore, they are commonly supplied via wires or batteries with electricity. With common technologies, this request leads to high requirements on tightness in liquids since poor sealing could easily lead to failures. Replacement of batteries inside pipes is complicated and almost accompanied by a flow interruption. The application of energy harvesters as power supply is therefore a good alternative. In our studies we used flexible piezoelectric energy harvesters of PVDF (Poly-Vinylidene-Di-Fluoride). All harvesting units consist of piezoelectric PVDF-foils as active layers and Aluminum-foils as electrodes. The layers were stacked alternating on each other and wound to a spool. A LDPE-film wraps the spool and prevents the inflow of liquids. The device has following parameters: No. of windings: 4 in air, 4, 5, 7 in water Dimensions: 15 mm Ø 22mm Materials: PDVF: 25μm Aluminimum: 6μm, LDPE: 25μm A ring shaped bluff body was placed inside the pipe to induce turbulence in the fluid stream. As the harvesters have been arranged downstream of the bluff body, they were forced to oscillate independent of the media. In each case, deformation of the active layers led to a polarization and a separation of electrical charges. Experiments were carried out in a wind channel as well as in a water pipe. In air, the spool oscillates with a frequency of about 30Hz, at a wind speed of about 7m/s. A -Voltage of about 4V (peak-peak) was measured. This delivers in case of power adjustment, power values of about 0.54μW. In water, the velocity of the fluid was limited to nearly one tenth. Oscillation starts only at a water speed above 0.6m/s. The average oscillation frequency is about 18Hz. At a velocity

  14. "Bainiaoyi, " Bamboo-Pipe Wind Instrument Troupe

    Institute of Scientific and Technical Information of China (English)

    1994-01-01

    The "Bainiaoyi," or Bamboo-Pipe Wind Instrument Troupe, consists of young men and women of Miao nationality of the mountain villages in Guangxi Zhuang Autonomous Region. Each of them can dance and sing well, and are often invited to perform in provinces and cities across China. Because of this, these young peasants who live deep in the mountain villages get a chance to leave their isolated homelands to visit other parts of the world and broaden their scope. The Miao people aren’t the only ones to benefit from these travels. More and more people now have the opportunity to

  15. Low Cost High Performance Generator Technology Program. Volume 5. Heat pipe topical, appendices

    Energy Technology Data Exchange (ETDEWEB)

    1975-07-01

    Work performed by Dynatherm Corporation for Teledyne Isotopes during a program entitled ''Heat Pipe Fabrication, Associated Technical Support and Reporting'' is reported. The program was initiated on November 29, 1972; the main objectives were accomplished with the delivery of the heat pipes for the HPG. Life testing of selected heat pipe specimens is continuing to and beyond the present date. The program consisted of the following tasks: Heat Pipe Development of Process Definition; Prototype Heat Pipes for Fin Segment Test; HPG Heat Pipe Fabrication and Testing; Controlled Heat Pipe Life Test; and Heat Pipe Film Coefficient Determination. (TFD)

  16. Static analysis of a piping system with elbows

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, B.J.

    1994-03-01

    Vibration tests of elbows to failure were performed in Japan in the early 1970s. The piping system included two elbows and an eccentric mass. Tests were run both pressurized and unpressurized. This report documents a static analysis of the piping system in which the elbows are subjected to out of plane bending. The effects of internal pressure and material plasticity are investigated.

  17. A Corrosion Risk Assessment Model for Underground Piping

    Science.gov (United States)

    Datta, Koushik; Fraser, Douglas R.

    2009-01-01

    The Pressure Systems Manager at NASA Ames Research Center (ARC) has embarked on a project to collect data and develop risk assessment models to support risk-informed decision making regarding future inspections of underground pipes at ARC. This paper shows progress in one area of this project - a corrosion risk assessment model for the underground high-pressure air distribution piping system at ARC. It consists of a Corrosion Model of pipe-segments, a Pipe Wrap Protection Model; and a Pipe Stress Model for a pipe segment. A Monte Carlo simulation of the combined models provides a distribution of the failure probabilities. Sensitivity study results show that the model uncertainty, or lack of knowledge, is the dominant contributor to the calculated unreliability of the underground piping system. As a result, the Pressure Systems Manager may consider investing resources specifically focused on reducing these uncertainties. Future work includes completing the data collection effort for the existing ground based pressure systems and applying the risk models to risk-based inspection strategies of the underground pipes at ARC.

  18. 46 CFR 119.430 - Engine exhaust pipe installation.

    Science.gov (United States)

    2010-10-01

    ... exhaust systems must ensure minimum risk of injury to personnel. Protection must be provided in compliance... in bulkhead penetration glands for dry exhaust systems. A wet exhaust pipe may be welded to a steel... 46 Shipping 4 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 119.430 Section...

  19. 46 CFR 182.430 - Engine exhaust pipe installation.

    Science.gov (United States)

    2010-10-01

    ... installation. (a) The design of all exhaust systems must ensure minimum risk of injury to personnel. Protection... be used in bulkhead penetration glands for dry exhaust systems. A wet exhaust pipe may be welded to a... 46 Shipping 7 2010-10-01 2010-10-01 false Engine exhaust pipe installation. 182.430 Section...

  20. 46 CFR 177.970 - Protection against hot piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Protection against hot piping. 177.970 Section 177.970 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Rails and Guards § 177.970 Protection against hot piping....

  1. 46 CFR 151.20-1 - Piping-general.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping-general. 151.20-1 Section 151.20-1 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Cargo Transfer § 151.20-1 Piping—general. (a) Cargo piping systems shall be arranged and fabricated in accordance with this section and Subchapter F. The class of...

  2. 46 CFR 197.462 - Pressure vessels and pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure vessels and pressure piping. 197.462 Section... Diving Equipment § 197.462 Pressure vessels and pressure piping. (a) The diving supervisor shall ensure that each pressure vessel, including each volume tank, cylinder and PVHO, and each pressure...

  3. 46 CFR 182.510 - Bilge piping system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge piping system. 182.510 Section 182.510 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) MACHINERY INSTALLATION Bilge and Ballast Systems § 182.510 Bilge piping system. (a) A vessel of at least...

  4. Plumbing and Piping: Construction, Supervision, and Inspection. Course of Study.

    Science.gov (United States)

    O'Meara, Lester; Turley, John

    This course of study on plumbing and piping is part of a construction, supervision, and inspection series, which provides instructional materials for community or junior college technical courses in the inspection program. Material covered in this volume pertains to: uniform plumbing code; pipes, fittings, supports, and connections; sewer and…

  5. 46 CFR 56.50-30 - Boiler feed piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Boiler feed piping. 56.50-30 Section 56.50-30 Shipping... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-30 Boiler feed piping. (a) General... least two separate means of supplying feed water for the boilers. All feed pumps shall be fitted...

  6. Detecting Pipe Bursts Using Heuristic and CUSUM Methods

    NARCIS (Netherlands)

    Bakker, M.; Jung, D.; Vreeburg, J.; Van de Roer, M.; Lansey, K.; Rierveld, L.

    2014-01-01

    Pipe bursts in a drinking water distribution system lead to water losses, interruption of supply, and damage to streets and houses due to the uncontrolled water flow. To minimize the negative consequences of pipe bursts, an early detection is necessary. This paper describes a heuristic burst detecti

  7. 24 CFR 3280.706 - Oil piping systems.

    Science.gov (United States)

    2010-04-01

    ... internal obstructions. The system shall be made of materials having a melting point of not less than 1,450... connection(s). (j) Testing for leakage. Before setting the system in operation, tank installations and piping... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Oil piping systems. 3280.706...

  8. 46 CFR 56.50-50 - Bilge and ballast piping.

    Science.gov (United States)

    2010-10-01

    ... suctions may be required. (2) Arrangements shall be made whereby water in the compartments will drain to the suction pipes. Efficient means shall be provided for draining water from all tank tops, other... position between the bilge suction manifold and the pump. (h) Pipes for draining cargo holds or...

  9. Temperature stratification in a hot water tank with circulation pipe

    DEFF Research Database (Denmark)

    Andersen, Elsa

    1998-01-01

    The aim of the project is to investigate the change in temperature stratification due to the operation of a circulation pipe. Further, putting forward rules for design of pipe inlet in order not to disturb the temperature stratification in the hot water tank. A validated computer model based...

  10. Pipe Phantoms With Applications in Molecular Imaging and System Characterization.

    Science.gov (United States)

    Wang, Shiying; Herbst, Elizabeth B; Pye, Stephen D; Moran, Carmel M; Hossack, John A

    2017-01-01

    Pipe (vessel) phantoms mimicking human tissue and blood flow are widely used for cardiovascular related research in medical ultrasound. Pipe phantom studies require the development of materials and liquids that match the acoustic properties of soft tissue, blood vessel wall, and blood. Over recent years, pipe phantoms have been developed to mimic the molecular properties of the simulated blood vessels. In this paper, the design, construction, and functionalization of pipe phantoms are introduced and validated for applications in molecular imaging and ultrasound imaging system characterization. There are three major types of pipe phantoms introduced: 1) a gelatin-based pipe phantom; 2) a polydimethylsiloxane-based pipe phantom; and 3) the "Edinburgh pipe phantom." These phantoms may be used in the validation and assessment of the dynamics of microbubble-based contrast agents and, in the case of a small diameter tube phantom, for assessing imaging system spatial resolution/contrast performance. The materials and procedures required to address each of the phantoms are described.

  11. Onset of Flow Induced Tonal Noise in Corrugated Pipe Segments

    NARCIS (Netherlands)

    Rudenko, O.; Nakiboglu, G.; Hirschberg, Abraham

    2014-01-01

    Corrugated pipes combine small-scale rigidity and large-scale flexibility, which make them very useful in industrial applications. The flow through such a pipe can induce strong undesirable tonal noise (whistling) and even drive integrity threatening structural vibrations. Placing a corrugated

  12. 76 FR 11812 - Drill Pipe and Drill Collars From China

    Science.gov (United States)

    2011-03-03

    ... Register on September 9, 2010 (75 FR 54912). The hearing was held in Washington, DC, on January 5, 2011... COMMISSION Drill Pipe and Drill Collars From China Determinations On the basis of the record \\1\\ developed in... of imports of drill pipe and drill collars from China, provided for in subheadings 7304.22,...

  13. 75 FR 10501 - Drill Pipe and Drill Collars from China

    Science.gov (United States)

    2010-03-08

    ... publishing the notice in the Federal Register of January 6, 2010 (75 FR 877). The conference was held in... COMMISSION Drill Pipe and Drill Collars from China Determinations On the basis of the record \\1\\ developed in... injury by reason of imports from China of drill pipe and drill collars, provided for in subheadings...

  14. Twenty-Four Tuba Harmonics Using a Single Pipe Length

    Science.gov (United States)

    Holmes, Bud; Ruiz, Michael J.

    2017-01-01

    Harmonics arise naturally from the resonances in strings and pipes. A video demonstration (Ruiz 2016 "YouTube: Tuba Harmonics" (https://youtu.be/souhEzOP9c4)) is provided where a tubist (coauthor Holmes) produces a phenomenal 24 harmonics using a single tuba pipe length by controlling the buzz of his lips. The frequencies of the…

  15. Computational fluid dynamics model of the spinning pipe gas lens

    CSIR Research Space (South Africa)

    Mafusire, C

    2010-08-01

    Full Text Available When a metal horizontal pipe is heated and spun along its axis, a graded refractive index distribution is generated which is can be used as a lens, thus its name, the spinning pipe gas lens (SPGL). Previous experimental results of its performance...

  16. Vibration testing and analysis of a multiply supported piping system

    Energy Technology Data Exchange (ETDEWEB)

    Hsieh, B.J.; Kot, C.A.; Srinivasan, M.G.

    1987-01-01

    The behavior of nuclear power plant piping systems during earthquake, and the most appropriate and economical mode of supporting such piping, is an issue of major concern. Consequently, the verification and validation of piping analysis methods and assumptions used in the design and safety assessment of nuclear power plants are of great interest. As part of its program on the validation of seismic calculational methods the US Nuclear Regulatory Commission (NRC) is specifically interested in the validation of the multiple support piping analysis module of the SMACS (Seismic Methodology Analysis Chain with Statistics) computer code. Data for the comparison of the dynamic behavior of various pipe hanger configurations and for the validation of piping response analyses were recently obtained in the large shaker experiments (SHAG) conducted at the HDR (Heissdampfreaktor) test facility in Kahl/Main, Federal Republic of Germany. This paper describes preliminary results from the SHAG piping response tests and the approach taken in the validation of the SMACS code piping analysis.

  17. Piping Stress Analysis of Secondary Cooling Water System in CARR

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Some piping valves of China Advanced Research Reactor (CARR) cannot maintain the leak tightness when debugging. Because the valves need to be exchanged, the stress analysis and evaluation should be made for the piping with new valves in order to make sure whether

  18. Fatal carbon monoxide intoxication after acetylene gas welding of pipes.

    Science.gov (United States)

    Antonsson, Ann-Beth; Christensson, Bengt; Berge, Johan; Sjögren, Bengt

    2013-06-01

    Acetylene gas welding of district heating pipes can result in exposure to high concentrations of carbon monoxide. A fatal case due to intoxication is described. Measurements of carbon monoxide revealed high levels when gas welding a pipe with closed ends. This fatality and these measurements highlight a new hazard, which must be promptly prevented.

  19. Design and cooling of BESIII beryllium beam pipe

    Science.gov (United States)

    Li, Xunfeng; Ji, Quan; Wang, Li; Zheng, Lifang

    2008-01-01

    The beryllium beam pipe was restructured according to the requirements of the upgraded BESIII (Beijing Spectrometer) experiment. SMO-1 (sparking machining oil no. 1) was selected as the coolant for the central beryllium beam pipe. The cooling gap width of the beryllium beam pipe was calculated, the influence of concentrated heat load on the wall temperature of the beryllium beam pipe was studied, and the optimal velocity of the SMO-1 in the gap was determined at the maximum heat load. A cooling system for the beam pipe was developed to control the outer wall temperature of the beam pipe. The cooling system is reported in this paper with regard to the following two aspects: the layouts and the automation. The performance of the cooling system was tested on the beam pipe model with trim size. The test results show that the design of the beryllium beam pipe is reasonable and that the cooling system achieves the BESIII experimental aim. The cooling system has already passed the acceptance test and has been installed in position. It will be put into practice for the BESIII experiment in 2008.

  20. PPOOLEX experiments with a modified blowdown pipe outlet

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2009-08-15

    This report summarizes the results of the experiments with a modified blowdown pipe outlet carried out with the PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through a vertical DN200 blowdown pipe to the condensation pool. Four reference experiments with a straight pipe and ten with the Forsmark type collar were carried out. The main purpose of the experiment series was to study the effect of a blowdown pipe outlet collar design on loads caused by chugging phenomena (rapid condensation) while steam is discharged into the condensation pool. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. During the experiments the initial temperature level of the condensation pool water was either 20-25 or 50-55 deg. C. The steam flow rate varied from 400 to 1200 g/s and the temperature of incoming steam from 142 to 185 deg. C. In the experiments with 20-25 deg. C pool water, even 10 times higher pressure pulses were measured inside the blowdown pipe in the case of the straight pipe than with the collar. In this respect, the collar design worked as planned and removed the high pressure spikes from the blowdown pipe. Meanwhile, there seemed to be no suppressing effect on the loads due to the collar in the pool side in this temperature range. Registered loads in the pool were approximately in the same range (or even a little higher) with the collar as with the straight pipe. In the experiments with 50-55 deg. C pool water no high pressure pulses were measured inside the blowdown pipe either with the straight pipe or with the collar. In this case, more of the suppressing effect is probably due to the warmer pool water than due to the modified pipe outlet. It has been observed already in the earlier experiments with a straight pipe in the POOLEX and PPOOLEX facilities that warm pool water has a diminishing effect on

  1. Experimental investigation of cryogenic oscillating heat pipes

    Science.gov (United States)

    Jiao, A.J.; Ma, H.B.; Critser, J.K.

    2010-01-01

    A novel cryogenic heat pipe, oscillating heat pipe (OHP), which consists of an 4 × 18.5 cm evaporator, a 6 × 18.5 cm condenser, and 10 cm length of adiabatic section, has been developed and experimental characterization conducted. Experimental results show that the maximum heat transport capability of the OHP reached 380W with average temperature difference of 49 °C between the evaporator and condenser when the cryogenic OHP was charged with liquid nitrogen at 48% (v/v) and operated in a horizontal direction. The thermal resistance decreased from 0.256 to 0.112 while the heat load increased from 22.5 to 321.8 W. When the OHP was operated at a steady state and an incremental heat load was added to it, the OHP operation changed from a steady state to an unsteady state until a new steady state was reached. This process can be divided into three regions: (I) unsteady state; (II) transient state; and (III) new steady state. In the steady state, the amplitude of temperature change in the evaporator is smaller than that of the condenser while the temperature response keeps the same frequency both in the evaporator and the condenser. The experimental results also showed that the amplitude of temperature difference between the evaporator and the condenser decreased when the heat load increased. PMID:20585410

  2. CODIFICATION OF FIBER REINFORCED COMPOSITE PIPING

    Energy Technology Data Exchange (ETDEWEB)

    Rawls, G.

    2012-10-10

    The goal of the overall project is to successfully adapt spoolable FRP currently used in the oil industry for use in hydrogen pipelines. The use of FRP materials for hydrogen service will rely on the demonstrated compatibility of these materials for pipeline service environments and operating conditions. The ability of the polymer piping to withstand degradation while in service, and development of the tools and data required for life management are imperative for successful implementation of these materials for hydrogen pipeline. The information and data provided in this report provides the technical basis for the codification for fiber reinforced piping (FRP) for hydrogen service. The DOE has invested in the evaluation of FRP for the delivery for gaseous hydrogen to support the development of a hydrogen infrastructure. The codification plan calls for detailed investigation of the following areas: System design and applicable codes and standards; Service degradation of FRP; Flaw tolerance and flaw detection; Integrity management plan; Leak detection and operational controls evaluation; Repair evaluation. The FRP codification process started with commercially available products that had extensive use in the oil and gas industry. These products have been evaluated to assure that sufficient structural integrity is available for a gaseous hydrogen environment.

  3. Computational model of miniature pulsating heat pipes.

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Mario J.; Givler, Richard C.

    2013-01-01

    The modeling work described herein represents Sandia National Laboratories (SNL) portion of a collaborative three-year project with Northrop Grumman Electronic Systems (NGES) and the University of Missouri to develop an advanced, thermal ground-plane (TGP), which is a device, of planar configuration, that delivers heat from a source to an ambient environment with high efficiency. Work at all three institutions was funded by DARPA/MTO; Sandia was funded under DARPA/MTO project number 015070924. This is the final report on this project for SNL. This report presents a numerical model of a pulsating heat pipe, a device employing a two phase (liquid and its vapor) working fluid confined in a closed loop channel etched/milled into a serpentine configuration in a solid metal plate. The device delivers heat from an evaporator (hot zone) to a condenser (cold zone). This new model includes key physical processes important to the operation of flat plate pulsating heat pipes (e.g. dynamic bubble nucleation, evaporation and condensation), together with conjugate heat transfer with the solid portion of the device. The model qualitatively and quantitatively predicts performance characteristics and metrics, which was demonstrated by favorable comparisons with experimental results on similar configurations. Application of the model also corroborated many previous performance observations with respect to key parameters such as heat load, fill ratio and orientation.

  4. Thermoforming of Textile Composite Pipe Fittings

    Science.gov (United States)

    Ozaki, Jun-Ichi; Manabe, Ken-Ichi

    Thermoforming of braided thermoplastic composite tubes was carried out in order to clarify the mechanism of the thermoforming process for pipe fittings such as T-shape fittings, cross fittings and two-branch fittings. The composite tube was made of a cowoven braid that consists of a carbon braid and polyamide resin, and 4-ply tubes with initial fiber orientations of 18° and 26° are used in the experiment. The branch is formed with not only the fisherman's net effect but also with moving yarns along the longitudinal direction in every forming process. The results show that the deformation behavior of the braid is very complex. Therefore, fiber orientation through forming is also greatly changed. Wall thickness at the branch decreases with increasing branch height. From these results, it is found that a fitting with complex shape can be produced by thermoforming. T-shape fittings, cross fittings and two-branch fittings are achieved by this process. It is confirmed that moving yarns along the longitudinal direction plays an important role in branch forming of pipe fittings.

  5. Computational model of miniature pulsating heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Mario J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Givler, Richard C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2013-01-01

    The modeling work described herein represents Sandia National Laboratories (SNL) portion of a collaborative three-year project with Northrop Grumman Electronic Systems (NGES) and the University of Missouri to develop an advanced, thermal ground-plane (TGP), which is a device, of planar configuration, that delivers heat from a source to an ambient environment with high efficiency. Work at all three institutions was funded by DARPA/MTO; Sandia was funded under DARPA/MTO project number 015070924. This is the final report on this project for SNL. This report presents a numerical model of a pulsating heat pipe, a device employing a two phase (liquid and its vapor) working fluid confined in a closed loop channel etched/milled into a serpentine configuration in a solid metal plate. The device delivers heat from an evaporator (hot zone) to a condenser (cold zone). This new model includes key physical processes important to the operation of flat plate pulsating heat pipes (e.g. dynamic bubble nucleation, evaporation and condensation), together with conjugate heat transfer with the solid portion of the device. The model qualitatively and quantitatively predicts performance characteristics and metrics, which was demonstrated by favorable comparisons with experimental results on similar configurations. Application of the model also corroborated many previous performance observations with respect to key parameters such as heat load, fill ratio and orientation.

  6. Investigation of the Solvis stratification inlet pipe for solar tanks

    DEFF Research Database (Denmark)

    Andersen, Elsa; Jordan, Ulrike; Shah, Louise Jivan

    2004-01-01

    plates inside the pipes (Davidson, 1992) or openings in form of balls (e.g. Leibfried, 2000) or flaps (e.g. described in Krause, 2001) have entered the market during the recent years. In this paper an investigation of a stratification pipe with openings covered with flaps according to (Krause, 2001...... these openings from the bottom of the store mixed with the heated water that flew through the pipe and thereby induced mixing in the tank during charging. More detailed investigations of the flow structure close to the flaps of the stratification pipe are presented in the following for one set of operating......). The aim pursued was to transport the heated water into the tank level of corresponding temperature. Flexible stratification pipes (manifolds) have been further developed for example by (Gari et al., 1982). Furthermore, a wide variety of non flexible tubes with either open holes and perforated vertical...

  7. Finite-element analysis of flawed and unflawed pipe tests

    Energy Technology Data Exchange (ETDEWEB)

    James, R.J.; Nickell, R.E.; Sullaway, M.F. (ANATECH Research Corp., La Jolla, CA (USA))

    1989-12-01

    Contemporary versions of the general purpose, nonlinear finite element program ABAQUS have been used in structural response verification exercises on flawed and unflawed austenitic stainless steel and ferritic steel piping. Among the topics examined, through comparison between ABAQUS calculations and test results, were: (1) the effect of using variations in the stress-strain relationship from the test article material on the calculated response; (2) the convergence properties of various finite element representations of the pipe geometry, using shell, beam and continuum models; (3) the effect of test system compliance; and (4) the validity of ABAQUS J-integral routines for flawed pipe evaluations. The study was culminated by the development and demonstration of a macroelement'' representation for the flawed pipe section. The macroelement can be inserted into an existing piping system model, in order to accurately treat the crack-opening and crack-closing static and dynamic response. 11 refs., 20 figs., 1 tab.

  8. An assessment of seismic margins in nuclear plant piping

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W.P.; Jaquay, K.R. [Energy Technology Engineering Center, Canoga Park, CA (United States); Chokshi, N.C.; Terao, D. [Nuclear Regulatory Commission, Washington DC (United States)

    1996-03-01

    Interim results of an ongoing program to assist the U.S. Nuclear Regulatory Commission (NRC) in developing regulatory positions on the seismic analyses of piping and overall safety margins of piping systems are reported. Results of: (1) reviews of seismic testing of piping components performed as part of the Electric Power Research Institute (EPRI)/NRC Piping and Fitting Dynamic Reliability (PFDR) Program, and (2) assessments of safety margins inherent in the ASME Code, Section III, piping seismic design criteria as revised by the 1994 Addenda are reported. The reviews indicate that the margins inherent in the revised criteria may be less than acceptable and that modifications to these criteria may be required.

  9. ANALYSIS OF GROUP MAINTENANCE STRATEGY -ROAD PAVEMENT AND SEWERAGE PIPES-

    Science.gov (United States)

    Tanimoto, Keishi; Sugimoto, Yasuaki; Miyamoto, Shinya; Nada, Hideki; Hosoi, Yoshihiko

    Recently, it is critical to manage deteriorating sewerage and road facilities efficiently and strategically. Since the sewerage pipes are mostly installed under road pavement, the works for the replacement of the sewerage pipes are partially common to the works for the road. This means that the replacement cost can be saved by coordinating the timing of the replacements by sewerage pipe and road pavement. The purpose of the study is to develop the model based on Markov decision process to derive the optimal group maintenance policy so as to minimize lifecycle cost. Then the model is applied to case study area and demonstrated to estimate the lifecycle cost using statistical data such as pipe replacement cost, road pavement rehabilitation cost, and state of deterioration of pipes and road pavement.

  10. Uncertainty analysis for probabilistic pipe fracture evaluations in LBB applications

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, S.; Ghadiali, N.; Wilkowski, G.

    1997-04-01

    During the NRC`s Short Cracks in Piping and Piping Welds Program at Battelle, a probabilistic methodology was developed to conduct fracture evaluations of circumferentially cracked pipes for application to leak-rate detection. Later, in the IPIRG-2 program, several parameters that may affect leak-before-break and other pipe flaw evaluations were identified. This paper presents new results from several uncertainty analyses to evaluate the effects of normal operating stresses, normal plus safe-shutdown earthquake stresses, off-centered cracks, restraint of pressure-induced bending, and dynamic and cyclic loading rates on the conditional failure probability of pipes. systems in BWR and PWR. For each parameter, the sensitivity to conditional probability of failure and hence, its importance on probabilistic leak-before-break evaluations were determined.

  11. STABILITY ANALYSIS OF VISCOELASTIC CURVED PIPES CONVEYING FLUID

    Institute of Scientific and Technical Information of China (English)

    WANG Zhong-min; ZHANG Zhan-wu; ZHAO Feng-qun

    2005-01-01

    Based on the Hamilton's principle for elastic systems of changing mass, a differential equation of motion for viscoelastic curved pipes conveying fluid was derived using variational method, and the complex characteristic equation for the viscoelastic circular pipe conveying fluid was obtained by normalized power series method. The effects of dimensionless delay time on the variation relationship between dimensionless complex frequency of the clamped-clamped viscoelastic circular pipe conveying fluid with the Kelvin-Voigt model and dimensionless flow velocity were analyzed. For greater dimensionless delay time, the behavior of the viscoelastic pipe is that the first, second and third mode does not couple, while the pipe behaves divergent instability in the first and second order mode, then single-mode flutter takes place in the first order mode.

  12. TRANSPORT EFFICIENCY OF THE SPIRAL FLOW IN CIRCULAR PIPE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A concise definition of Transport Efficiency (TE) was given to examine the amount of transported grains in the pipe flow with certain energy consumption. The transport characteristics and the so-called “roto-floating” characteristics were studied from the tests of sediment transport in the normal pipe flow and the spiral pipe flow, and hereby the energy gradients of the two kinds of pipe flows were obtained. By comparing the mean concentrations at the same gradient, it was concluded that the TE of the latter is several times to over ten times higher than that of the former, and the lift of the latter is 200 times larger than that of the former for the nearly same TE. The spiral flow in circular pipe is suitable for transporting fine grains of high concentration, and with sedimentation trend and coarse grains.

  13. Pipe-cleaner Model of Neuronal Network Dynamics

    CERN Document Server

    Armstrong, Eve

    2016-01-01

    We present a functional model of neuronal network connectivity in which the single architectural element is the object commonly known in handicraft circles as a pipe cleaner. We argue that the dual nature of a neuronal circuit - that it be at times highly robust to external manipulation and yet sufficiently flexible to allow for learning and adaptation - is embodied in the pipe cleaner, and thus that a pipe cleaner framework serves as an instructive scaffold in which to examine network dynamics. Regarding the dynamics themselves: as pipe cleaners possess no intrinsic dynamics, in our model we attribute the emergent circuit dynamics to magic. Magic is a strategy that has been largely neglected in the neuroscience community, and may serve as an illuminating comparison to the common physics-based approaches. This model makes predictions that it would be really awesome to test experimentally. Moreover, the relative simplicity of the pipe cleaner - setting aside the fact that it comes in an overwhelming variety of...

  14. The Interlayer Stress Analysis of Polyethylene-steel Composite Pipes

    Institute of Scientific and Technical Information of China (English)

    WEI Xu-guang

    2016-01-01

    Polyethylene-steel Composite Pipes is widely used in conveying corrosive media occasions, but the pipe may lose effectiveness in the process of transporting hot and cold media, so the research of stress distribution and variation in polyethylene-steel composite pipes is very necessary.This article first assume that a thin adhesive layer is in between the polyethylene and steel, the adhesive layer along the axial shear stress is the major cause of the polyethylene layer and the steel pipe off sticky.Secondly, we use a method of finite element to computer simulation by ANSYS, and verify initial assumptions. Finally, based on simulation data, we analyse the adhesive layer stress distribution and the variation with different parameters to change.Through the above research, preliminarily summarize the variation and distribution of interlaminar stress, and provide technical support for future design and process improvement of polyethylenesteel pipe.

  15. Condensation driven water hammer studies for feedwater distribution pipe

    Energy Technology Data Exchange (ETDEWEB)

    Savolainen, S.; Katajala, S.; Elsing, B.; Nurkkala, P.; Hoikkanen, J. [Imatran Voima Oy, Vantaa (Finland); Pullinen, J. [IVO Power Engineering Ltd., Vantaa (Finland); Logvinov, S.A.; Trunov, N.B.; Sitnik, J.K. [EDO Gidropress (Russian Federation)

    1997-12-31

    Imatran Voima Oy, IVO, operates two VVER 440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of the feed water distribution (FWD) pipes were observed in 1989. In closer examinations FWD-pipe T-connection turned out to suffer from severe erosion corrosion damages. Similar damages have been found also in other VVER 440 type NPPs. In 1994 the first new FWD-pipe was replaced and in 1996 extensive water hammer experiments were carried out together with EDO Gidropress in Podolsk. After the first phase of the experiments some fundamental changes were made to the construction of the FWD-pipe. The object of this paper is to give short insight to the design of the new FWD-pipe concentrating on water hammer experiments. (orig.).

  16. Buckling behavior of pipes in oil and gas wells

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on the non-linear differential equations of buckled pipes, the buckling behavior of pipes in different wellbores has been analyzed. The relation between the deflection of buckled pipe and the loads on it has been given, and the critical loads for sinusodal and helical buckling within different wellbores subjected to axial and torsional loads have been determined. Therefore, the profile of load increase during the post-buckling process and the bending moments in the buckled pipe can be determined. In addition, the effects of down-hole packer as fixed end on the helical buckling behavior of pipes have been investigated. These results can be applied to the related engineering design and construction.

  17. Blockage Detection in Circular Pipe Using Vibration Analysis

    Directory of Open Access Journals (Sweden)

    N. L. T. Lile

    2012-01-01

    Full Text Available Pipe is an important medium used in most industrial and home applications for transferring liquid or gas from one end to the other. The efficiency of liquid flow is crucial to ensure proper and efficient delivering of medium carried. Liquid flow may be abrupt or ceased if blockage forms inside the circular pipe. This paper investigates the effect of blockage in circular pipe using vibration measurement. The main focus of this paper is to study the correlation of blockage levels to vibration signal. When fluid flow through an obstacle, the streamlines get closer which will increase the flow velocity and decrease the pressure. The vibration parameters are measured using accelerometer and the relationship between blockage levels to vibration signal are observed. It is found that vibration in pipe increases as the flow area gets smaller. This work expresses the potential of vibration analysis in assessing blockage inside a circular pipe with direct water flow.

  18. Entransy dissipation analysis and optimization of separated heat pipe system

    Institute of Scientific and Technical Information of China (English)

    QIAN XiaoDong; LI Zhen; MENG JiAn; LI ZhiXin

    2012-01-01

    Seperated heat pipe systems are widely used in the fields of waste heat recovery and air conditioning due to their high heat transfer capability,and optimization of heat transfer process plays an important role in high-efficiency energy utilization and energy conservation.In this paper,the entransy dissipation analysis is conducted for the separated heat pipe system,and the result indicates that minimum thermal resistance principle is applicable to the optimization of the separated heat pipe system.Whether in the applications of waste heat recovery or air conditioning,the smaller the entransy-dissipation-based thermal resistance of the separated heat pipe system is,the better the heat transfer performance will be.Based on the minimum thermal resistance principle,the optimal area allocation relationship between evaporator and condenser is deduced,which is numerically verified in the optimation design of separated heat pipe system.

  19. Heat pipe radiator. [for spacecraft waste heat rejection

    Science.gov (United States)

    Swerdling, B.; Alario, J.

    1973-01-01

    A 15,000 watt spacecraft waste heat rejection system utilizing heat pipe radiator panels was investigated. Of the several concepts initially identified, a series system was selected for more in-depth analysis. As a demonstration of system feasibility, a nominal 500 watt radiator panel was designed, built and tested. The panel, which is a module of the 15,000 watt system, consists of a variable conductance heat pipe (VCHP) header, and six isothermalizer heat pipes attached to a radiating fin. The thermal load to the VCHP is supplied by a Freon-21 liquid loop via an integral heat exchanger. Descriptions of the results of the system studies and details of the radiator design are included along with the test results for both the heat pipe components and the assembled radiator panel. These results support the feasibility of using heat pipes in a spacecraft waste heat rejection system.

  20. ANALYSIS OF NONLINEAR DYNAMIC STABILITY OF LIQUID-CONVEYING PIPES

    Institute of Scientific and Technical Information of China (English)

    张立翔; 黄文虎

    2002-01-01

    Nonlinearly dynamic stability of flexible liquid-conveying pipe in fluid structure interaction was analyzed by using modal disassembling technique. The effects of Poisson,Junction and Friction couplings in the wave-flowing-vibration system on the pipe dynamic stability were included in the analytical model constituted by four nonlinear differential equations. An analyzing example of cantilevered pipe was done to illustrate the dynamic stability characteristics of the pipe in the full coupling mechanisms, and the phase curves related to the first four modal motions were drawn. The results show that the dynamic stable characteristics of the pipe are very complicated in the complete coupling mechanisms, and the kinds of the singularity points corresponding to the various modal motions are different.