WorldWideScience

Sample records for pipe jacking

  1. Application of ANSYS 3D FEM in Studies of Surface Deformation Caused by Pipe Jacking

    Institute of Scientific and Technical Information of China (English)

    LI Fabin; FANG Kun; LI Hechao

    2007-01-01

    By using site observation data and establishing 3D model using ANSYS software, this paper has discussed the strain change of stratum stress during process of jacking-in and the impact of machine head on ground surface under different frontal resistances. Analysis of the two cases shows that soil pressure reaches its maximum point when the soil is right above machine head, and soil stress will gradually decline when machine head passes over it. It also shows that impact brought by pipe-jacking construction on stress change of the surrounding soil is limited. The thesis suggest that road surface should be consolidated and soil condition be improved before construction to prevent loss and disaster caused by road surface deformation, jacking force can be increased so that jacking efficiency can be enhanced when ground stratum is well filled with soil, but the frontal resistance facing machine head should be equal to surrounding soil pressure in order to avoid rise of ground surface.

  2. Finite elements analysis of an underground collector installed by pipe-jacking method

    Science.gov (United States)

    María Díaz-Díaz, Luis; Omer, Joshua; Arias, Daniel; Pando, Luis

    2016-04-01

    This study presents a useful analysis method for estimating simultaneously the stability, stress distribution and groundwater seepage as micro - tunnel is being advanced into the ground. The research is mainly concerned with the results of a case study conducted on a project to create a long industrial collector of effluent network in the east bank of the river Avilés (north coast of Spain). This coastal city has significant port and industrial installations in its environs. The geology of the location comprises Quaternary deposits on both flanks of the estuary and includes different highly variable geotechnical behavior. The industrial effluent network, constructed in the year 2010, has a length of 13.087 km and consists of 1.5 m diameter pipes, reaching a maximum depth of 5.8 m below the surface. Only the first 7.0 km of the collector (south area) were formed using pipe-jacking method whilst the rest were formed in open excavations or surface laid. Using the commercial software RS2, a 2D finite element program for soil and rock application, the ground response to pipe jacking in pipeline installation in Avilés was analyzed. Both axi-symmetric and plane strain analyses were carried out in RS2 to simulate in 3D the ground response to pipe advancement. The results demonstrate how much of deformation there is at ground surface in the immediate vicinity of the pipeline. The main objective is to show the possible patterns of ground subsidence and tunnel stresses to inform designers as to whether the tunnel will be stable and safe.

  3. 钢管管道敞开式顶管纠偏控制%Deviation-Correction Control of Steel Pipe for Open Pipe Jacking

    Institute of Scientific and Technical Information of China (English)

    张肃肃

    2015-01-01

    Analysis and research on deviation‐correction of steel pipe for open pipe jacking ,combined with the different characteristic of surrounding rocks that centralized heating and cooling pipes project passed through in economic zone of CBD General Headquarters in Chongqing ,the litholocal included soil mass(earth backing) and bedrock(sandstone ,shale) ,carried on deviation‐correction control in pipe jacking launching. After the project finished ,the deviation of pipe was in the permissible range.%对钢管管道敞开式顶管纠偏进行了分析研究,结合重庆CBD总部经济区集中供冷供热管道工程施工中的土体(回填土体)、岩石(砂岩、页岩)的不同围岩特性,在顶管顶进过程中进行纠偏控制。工程完工后,管道偏差在允许范围内。

  4. USE OF FULL FACE SLURRY SHIELD FOR PIPE JACKING IN HONG KONG'S RECLAIMED LAND%全断面泥浆式盾构在香港填海地区顶管施工中的应用

    Institute of Scientific and Technical Information of China (English)

    应海民; 潘新华

    2003-01-01

    Pipe jacking has become a popular method in drainage construction in Hong Kong. However, the varied ground conditions encountered in reclaimed land may pose severe problems to pipe jacking operation. This paper presents the experience of using the full face slurry shield for pipe jacking in a reclaimed area. The study shows that the full face slurry shield with a rock cutting head performs satisfactorily. To ensure the machine can work effectively in all ground conditions, other factors need to be considered including the rock cutting head being worn away, the hitting of under ground structures, the sustainability of jacked pipes alignment, the associated ground settlement and the damage to the jacked pipes caused by the jacking pressure.

  5. Application of GRP pipe jacking technique in China%我国玻璃钢夹砂管顶管技术的应用

    Institute of Scientific and Technical Information of China (English)

    霍贞

    2012-01-01

    In light of more and more extensive application condition of GRP jacking technique in China,the paper specifically introduces the manufacturing process and features of GRP pipe jacking,calculation methods of relevant technological parameters,and construction schemes and so on,with a view to guide practice.%针对国内玻璃钢夹砂管顶管技术应用越来越广泛的情况,详细介绍了玻璃钢夹砂管顶管制作工艺、特点、相关技术参数的计算方法及施工方案等,以期指导实践。

  6. 顶管施工引起古建筑地表沉降分析%Analysis of Historic Building Settlements Induced by Pipe Jacking Construction

    Institute of Scientific and Technical Information of China (English)

    曹书文; 陈平; 赵冬; 刘俊卿; 张卫喜

    2011-01-01

    为了对玉皇阁基础托换时提供参考,对顶管施工时玉皇阁阁体沉降进行了监测.在阁体的每面墙体上设置了七个测点,在施工期间每天定时进行沉降观测,得到了顶管施工过程中阁体沉降数据.由沉降数据可以看出,影响阁体沉降的主要因素为:(1)土体开挖引起应力释放;(2)纠偏引起的超挖;(3)摩擦力引起的箱梁周围空隙;(4)土体扰动后固结.并对此提出了合理的建议,为类似顶管工程提供参考.%To provide reference of foundation underpinning of Yu Huang pavilion, the settlements of Yu Huang pavilion are monitored in the pipe jacking construction period. 7 monitoring points were arranged on each wall of Yu Huang pavilion, the settlements were observed at a fix time everyday, and the settlements of Yu Huang pavilion were obtained in the pipe jacking construction period. From the data, it can be seen that the following main factors that affect the settlements of Yu Huang pavilion arc given: ( 1 ) stress release for soil excavation; ( 2 ) over excavation to rectification; ( 3 ) void around box girder due to friction; (4) soil consolidation after being disturbed. Proper suggestions are put forward in accordance with to these factors, which can provide reference for similar pipe jacking construction.

  7. Comprehensive Application of Steel Reinforced Concrete Jacking Pipe and Sand Glass Fiber Reinforced Plastic Pipe%钢筋混凝土管顶管与夹砂玻璃钢管的综合应用

    Institute of Scientific and Technical Information of China (English)

    李之国

    2009-01-01

    该文介绍了采用DN2200钢筋混凝土管作为穿越管道进行顶管施工,然后在钢筋混凝土管内安装DNl800承插式夹砂玻璃钢管相结合的施工方法.此施工方法可有效地解决埋深较大的市政污水压力管道工程的施工技术问题.现供从事市政污水压力管道工程施工的同行参考.%The article introduces the construction of jacking pipe by using DN2200 steel reinforced concrete pipe as the crossing pipe, and the construction method of then installing DN1800 socket-and-spigot sand glass fiber reinforced plastic pipe into the steel reinforced concrete pipe. This construction method can efficiently solve the construction technical problems of the deeper embedded municipal sewage pressure pipe, which can provide the reference for the construction of the municipal sewage pressure pipe.

  8. Analysis of the Surrounding Environment Influence Caused by Rectangular Pipe Jacking Construction in Shanghai%上海地区某大口径矩形顶管施工周边环境影响监测分析

    Institute of Scientific and Technical Information of China (English)

    孙亚峰

    2015-01-01

    顶管技术作为非开挖的技术中的一种,可以在不用开挖地表土的情况下将管道铺设完毕,具有其他开挖方式无可比拟的优点,其应用也越来越广泛。但是在顶管施工中,不可避免地会破坏管道周围土体原有的平衡,造成地面的沉降,对周边环境造成影响。相对于圆形顶管,矩形顶管对周围土体的扰动更大,从而引起的地面变形也更大。本文以上海市徐汇区某地下通道矩形顶管工程为背景,通过现场监测数据分析,得出了一些有益的结论。%As one of Trench less Technology ,Pipe jacking has the unparalleled advantage of finishing pipeline laying without excavating surface soil ,and has become widely used .However ,pipe jacking will inevitably break the original soil balance around the pipe ,leading to land subsidence and affect buildings surrounded ,even endangers their safety .Rela-tive to circular pipe jacking ,rectangular pipe jacking construction may disturb the soil more heavily and cause more sur-face deformation.This thesis based on the rectangular pipe jacking construction project of Shanghai Xuhui District under -ground passage .Through on-site monitoring data analysis ,some useful conclusions are obtained .

  9. 人工掘进顶管穿越沙基公路总顶力确定和施工风险规避%The Total Jacking Force to Calculate and Construction Risk Averse For Manual Pipe Jacking Through Sand Layers Road

    Institute of Scientific and Technical Information of China (English)

    李国明; 任哲; 杨帆

    2016-01-01

    人工掘进顶管穿越沙基公路施工易出现总顶力计算错误、后背墙倾斜、工作面坍塌等问题,从而造成顶管施工失败,应结合工程实例,探讨适于人工掘进顶管穿越沙基公路的总顶力计算公式,对于后背墙倾斜、工作面坍塌等施工难点提出具体的工程措施。通过理论计算与工程实例得出结论,国家标准总顶力计算公式适于人工掘进顶管总顶力计算;人工掘进顶管穿越沙基公路的穿越长度不宜大于26 m;后背墙、工具管的设计对于人工掘进顶管穿越沙基公路施工成败至关重要。%The total jacking force calculation error, backwall tilted, working face landslide and so on which caused by the manual pipe jacking through sand layers road construction fail-ure. Combined with construction, to discuss the calculation formula of the total jacking force which is suitable for construction of manual pipe jacking through sand layers road;En-gineering difficulties such as backwall tilted, working face landslide and so on, engineering measures is provided, and it can be referred to engineering practices. According to analysis, the calculation formula of the total jacking force which is adopted by the national standard is suitable for construction of manual pipe jacking through sand layers road;The total length should be less than 26 m while manual pipe jacking through sand layers road;Design of back-wall and tool pipe for manual pipe jacking through sand layers road are crucial to Success of engineering construction.

  10. 顶管施工过程中的地面沉降风险控制%Risk control of land subsidence in the process of pipe jacking construction

    Institute of Scientific and Technical Information of China (English)

    王伟

    2016-01-01

    Pipe jacking is a very complicated system construction, and there are certain risks in each link of construction. Risks of land subsidence in the process of pipe jacking construction are analyzed in this article. Some risk control methods of land subsidence during pipe jacking construction are summarized, which could provide some references for land subsidence risk control of similar pipe jacking construction.%顶管施工是一项系统性很强的复杂工程,在施工的每个环节都存在一定的风险。本文主要针对顶管施工过程中的地面沉降风险进行分析,总结了一些关于顶管施工过程中地面沉降风险控制的方法,可为类似顶管工程施工的地面沉降风险控制提供参考。

  11. On the Design of a Reinforced Concrete Pipe for a Heat Supply Tunnel Constructed by Pipe Jacking%顶管法热力隧道钢筋混凝土管设计研究

    Institute of Scientific and Technical Information of China (English)

    董淑棉

    2013-01-01

    Mechanical pipe jacking construction technology is characterized by many advantages,such as fast construction,high automation,safety,reliability,and less impact on surroundings; it is therefore of great importance in the construction of heat supply tunnels.During the operation phase,a heat supply tunnel will be subjected to a high environmental temperature and internal forces of constant thrust,guiding thrust,and so on.This paper analyzes the deformation and mechanical state of the mechanically jacked reinforced concrete pipe for a heat supply tunnel in different temperatures by means of field testing and theoretical calculation.The results were verified by engineering practice.Additionally,it summarizes how the design and calculation method for reinforced concrete pipes are applicable to heat supply engineering.Finally,it concludes that the calculation results for the structural design of the reinforced concrete pipe in a jacked heat supply tunnel are similar to the test results with more safety redundancy,provided that a reduction method for the concrete strength and elastic modulus is used.%机械顶管施工技术具有施工速度快、自动化程度高、安全可靠、对周围环境影响小等优点,将顶管技术用于热力隧道施工中,具有重要意义.热力隧道在运行过程中,存在较高的环境温度,有固定推力、导向推力等内作用力.文章通过现场试验和理论计算,研究分析了热力机械钢筋混凝土顶管在不同温度工况下的变形和力学状态,并通过工程实践进行了验证;总结出了适用于热力工程的钢筋混凝土管的设计计算方法.分析结果表明,采取混凝土强度值及弹性模量折减的方法进行顶管法热力隧道钢筋混凝土管的结构设计,其计算与试验结果较为接近,更偏于安全.

  12. Field Test of Qiantangjiang Embankment Deformation Monitoring Caused by Pipe-jacking Construction%顶管穿越钱塘江大堤变形监测现场试验研究

    Institute of Scientific and Technical Information of China (English)

    吴军君; 张开伟; 刘振伟

    2011-01-01

    Taking the Qiantangjiang embankment deformation monitoring caused by sewage pipe-jacking construction of Tongxiang in Zhejiang province for an example, according to the field monitoring and test results, the influence of pipe-jacking during and after construction on soil disturbance deformation around the dike is analyzed. The methods of O'Reilly and Loganathan are proposed to calculate slot width coefficient of land subsidence during pipe-jacking construction. Then it is substituted to Peck formula for fitting horizontal ground settlement curvet which has good fitting degree. Finally, it points out that the settlement calculation after construction must be selected zero point rationally and the hyperbolic fitting is more applicable. The results show that the proposed method is effective, which has guided meaning for safety e-valuation of embankment.%以浙江省桐乡污水顶管穿越钱塘江大堤变形监测项目为例,根据现场监测与试验结果,分析了顶管施工期间和工后对大堤周围土体扰动变形的影响,提出项管施工期间分别依据O' Reilly和Loganathan法推算地面沉降槽宽度系数代入Peck公式拟合地面横向沉降曲线,拟合度较好,指出工后沉降推算需合理选取零点,采用双曲线拟合法更适用.结果表明,该方法行之有效,对堤防安全评价有指导意义.

  13. 行星刀盘方顶管全断面切削混凝土试验研究%Experimental Study on Full-Face Concrete Cutting by a Rectangular Pipe-jacking Machine with a Planetary Cutterhead

    Institute of Scientific and Technical Information of China (English)

    魏林春

    2014-01-01

    The mining method with soil reinforcement is now mainly adopted in the construction of cross passages of shield tunnels, which is characterized by high risk and complex working conditions. In this paper, based on the adoption of a specially developed rectangular pipe-jacking machine with a planetary cutterhead, full-face cutting tests are carried out on concrete samples of different strength grades. Research on cutting-tool selection and layout, as well as the machinability of pipe-jacking with a planetary cutterhead, are undertaken, providing a technical reference for future cross-passage construction in shield tunnels adopting pipe-jacking to cut concrete composite segments, thereby refraining from exposing the reinforced soil mass due to segment removal, and greatly reducing the construction risk.%目前盾构隧道联络通道主要采用土体加固暗挖法进行施工,但在复杂工况环境下仍存在极大施工风险。文章通过采用专门研制的行星刀盘方顶管对不同强度等级的混凝土试块进行全断面切削试验,对顶管刀具选型及布置、行星刀盘顶管切削性能等进行了研究,可为今后采用顶管法直接切削混凝土复合管片的盾构隧道联络通道的施工提供相应的技术储备,避免移除管片暴露加固土体,以大大降低盾构隧道联络通道施工风险。

  14. 近接小半径曲线顶管施工扰动数值研究%Numerical investigation on construction disturbance of close pipe-jacking with short-radius curve

    Institute of Scientific and Technical Information of China (English)

    魏龙海; 程勇; 陈炜韬; 路军富

    2012-01-01

    During the construction process of the close-pipe jacking with short-radius curve,the problem of the construction disturbance must be paid attention to. The GONGBEI tunnel is lie in the connect-line engineering of Hong Kong-Zhuhai-Macau Bridge, this tunnel's sector is very big (about 328 m2) and the geological conditions is very complex, will builded by long-pipe roof pre-support method. Based on the local condition,using numerical simulation,studied on the construction disturbance of close pipe jacking with short-radius curve.The results shows that: 1) With the increasing of excavation ring count,the measure points deformation is increasing gradually, and when the tunnel work face is close to the monitor section,the ground uplift is more obvious;2) When the later pipe-jacking begin to tunneling,the soil above the forgoing pipe is sinking,but the soil above the later pipe is uplift,with the later pipe-jacking tunneling,the max-uplift of measure points is right avertence.and the displacement on the later pipe is bigger than the forgoing, when the later pipe-jacking come through the measure section, the soil on the forgoing and later pipe has some submergence; 3) When the forgoing pipe-jacking construction was completed,the ejection force was canceled,and then the soil has some springback,so the effect of resistance by the later pipe-jacking was reduced,and the influence to forgoing pipe is not obvious by the later.%近接小半径曲线顶管工程中,顶管之间的相互扰动以及顶管施工对周围环境的影响等成为施工过程中必须关注的问题.港珠澳珠海侧接线工程拱北隧道开挖断面大(约328 m2),地质条件复杂,设计拟在隧道周边进行超前大顶管预支护.以该工程为基础,利用数值方法,对近接小半径曲线顶管的施工过程进行了数值模拟研究.研究结果表明:1)随着掘进环数的增加,各监测点的地层隆起量逐渐增大,且顶管掌子面距离监测断面越近,

  15. 给水管道顶管工程岩土勘察及其施工工艺分析评价%Analysis and Evaluation of Water Supply Pipe Jacking Engineering Geotechnical Investigation and Construction Process

    Institute of Scientific and Technical Information of China (English)

    李志国

    2013-01-01

    本文介绍了给水管道顶管工程的相关特点和要素,并以相关的工程案例为基础,着重分析了顶管工程的应用和作用;同时,研究施工现场的岩土性质和地质勘查工作的应用和作用,以此评价给水管道工程是否稳定、符合工程要求。%This paper introduces the characteristics and elem-ents of water supply pipeline pipe jacking engineering, and ta-king related engineering case as the foundation, emphatical y analyzes the application and function of pipe jacking enginee-ring;at the same time, studies the construction site of the geo-technical properties and geological prospecting application and function of work, so as to evaluate the pipeline of water supply engineering is stable or not, whether it meets the engineering requirements.

  16. 综合物探方法在顶管路径障碍物勘探中的应用%Application of Integrated Geophysical Exploration Methods in Exploration of Obstacles in Pipe Jacking Path

    Institute of Scientific and Technical Information of China (English)

    詹斌; 廖智; 朱能发

    2012-01-01

      With the rapid development and ongoing conducting of urban infrastructure, underground pipeline projects are getting more and more. In order to guarantee the safety and protect the original underground pipes in the process of pipe jacking construction, it is necessary to give a close exploration on the underground obstacles in the direction of pipe jacking construction path. Been widely used in solving underground construction problems, geophysical exploration technology uses advanced geophysical exploration equipments to ascertain the distribution of underground physical field, makes a comparison with the physical field under homogeneous conditions, and lastly finds out the differences to research on the relation with the exploration object. The object exploration methods of geological radar and seismic image have many advantages including time saving, high efficiency, reducing quantity of exploration work, lowering exploration cost, and improving geology exploration quality, which have been approved by many practical engineering cases. Through a practical case of obstacles exploration in pipe jacking construction path in Tianjin, this paper gives an analysis of the efficiency of methods of geological radar and seismic image in the application of obstacles exploration in the direction of pipe jacking construction path.%  随着国家的飞速发展和城市基础建设的不断进行,地下管道埋设工程越来越多,为保证顶管施工过程中的安全以及保护原场地地下管网,施工前有必要对顶管施工路径方向地下障碍物的走向位置和埋设深度进行详细勘探。物探技术利用先进的物探仪器来摄取地下物理场的分布并与均质条件下的物理场相比较,找出差异的部分来研究与勘探对象之间的关系,被广泛应用于解决地下工程问题。地质雷达与地震映像物探方法由于其具有省时、高效、能减少勘探工作量,降低勘探成本,提高

  17. Analysis of application effect of ground penetrating radar in detection of voids around underground jacked pipes%探地雷达在地下顶管脱空检测中的应用效果分析

    Institute of Scientific and Technical Information of China (English)

    杨天春; 许德根; 王齐仁; 张正发

    2016-01-01

    为了对顶管周围的脱空和密实情况进行探测,结合工程实例,采用探地雷达对水泥顶管和钢制顶管开展实践探测工作和试验性探测研究;同时,从理论上建立了水泥顶管和钢管顶管的脱空模型,开展探地雷达二维有限单元法正演模拟。研究结果表明:探地雷达对水泥顶管周围的脱空情况进行探测时,能取得很好的效果;探地雷达对钢制顶管周围的脱空情况进行探测时,由于雷达天线与管壁之间的多次反射信号强烈,对脱空的探测效果很差。因此,探地雷达对于水泥制的顶管脱空检测是可行的,而对于钢制顶管的脱空检测需要研究新的无损检测方法、研制新的设备,以便取得好的应用效果。%In order to detect the voids and compactness around jacked pipes, a field survey and experiments were carried out to detect the voids around cement and steel pipes in an engineering case with a ground penetrating radar (GPR). A theoretical model for simulating the voids around the cement and steel pipes was established, and forward modeling of the GPR was conducted with the two⁃dimensional finite element method. The results show that the GPR is effective in detecting the voids around the cement pipes. However, it is not effective in detecting the voids around the steel pipes, because the multiply reflected signals between the radar antenna and pipe wall are strong. It is determined that it is feasible to use GPR to detect the voids around cement pipes. Meanwhile, for the detection of voids around cement pipes, new nondestructive examination methods and new types of equipment have to be developed in order to obtain better application effects.

  18. RESEARCH ON AUTOMATIC MONITORING TECHNIQUE OF PIPE REPLACED BY BOX CULVERT JACKING PROCESS%箱涵顶进置换管幕顶推过程自动测量技术研究

    Institute of Scientific and Technical Information of China (English)

    潘国荣; 宋蕴璞; 李怀锋; 张鹏

    2012-01-01

    结合上海金山既有铁路下顶进公路箱涵工程,介绍以自动全站仪为主的智能导向系统的原理及关键技术.实用表明,该系统在实际施工中具有可靠性强、系统运行稳定、测量精度高的特点,可以在恶劣的施工环境中正常运行.%Automatic real - time guidance measurement is the key to modern construction measurement. Nowa-days, in China the new underground 3D traffic engineering method of pipe replaced by box culvert jacking is used, but the manual measurement can not meet the requirement of real-time monitoring. So a set of Total Station-based intelligent automatic guidance system has been developed thus could achieve the measurement automatically and im-prove work efficiency greatly. The principle and key technology of this intelligent guidance system is introduced. In the same time, combined with successful application of culvert jacking highway in the existing railway project in Shanghai Jinshan, this system proved practical and excellent with higher reliability and accuracy.

  19. Construction Technology Research Municipal Water Supply and Drainage Pipe Jacking Construction of Long-distance%市政给排水工程施工中长距离顶管施工技术研究

    Institute of Scientific and Technical Information of China (English)

    陈琳

    2014-01-01

    With the acceleration of urbanization process in China, the municipal water supply and drainage projects in urban drainage systems are also playing an increasingly important role. Municipal water supply and drainage works include three parts water, sewage and recycled water, are related to people’s daily drinking water situation. Currently, science and technology has penetrated into all walks of life among and plays an important role. Modern municipal water supply and drainage construction also affected science and technology, after the introduction of advanced technology and equipment, modern municipal water supply and drainage construction largely contributed to the development of society, for the people’s daily life has made a great contribution. Analysis and discussion of the municipal water supply and drainage construction in the long distance pipe jacking technology, hoping to play a guiding role in the theory of development for municipal drainage works.%随着我国城市化进程的不断加快,市政给排水工作在城市排水系统工程中也发挥着越来越重要的作用。市政给排水工程包括供水、排水和循环水三个部分,都关系到市民的日常饮水情况。目前,科学技术已经渗透到各行各业当中,并发挥着重要的作用。现代市政给排水施工也受到了科学技术的影响,在引入了先进的技术和设备之后,现代市政给排水施工在很大程度上促进了社会的发展,为人们的日常生活作出了巨大贡献。分析和探讨了市政给排水施工中的长距离顶管施工技术,希望可以为市政给排水工程的发展起到一定的理论指导作用。

  20. Evaluation of Reinforcement Effect of Ends Soil in Pipe Jacking Machine Launching and Arrival Based on Orthogonal Experiment Method%基于正交试验法的顶管端头土体加固效果评价

    Institute of Scientific and Technical Information of China (English)

    吴飞; 孙阳; 邵国建; 钱军; 刘勇

    2016-01-01

    The end soil reinforcement of pipe jacking launching and arrival is the key to successful tunnel construction. In this paper,the formula of stability coefficient is given when the longitudinal thickness of reinforced soil is greater than the height of the tunnel entrance,which is an improvement for the existing sliding instability theory;and then three dimensional FEMis used to calculate the surface settlement when the H-steel support is removed and when the shield crossed the reinforced area.Finally,the orthogonal experiment method is adopted to analyze the influence of longitudinal thickness of reinforced soil,the strength of reinforced soil and the thickness of cover on reinforcement effect of end soil. The results show that:1)The thickness of cover and the strength of reinforced soil affect the maximum ground surface settlement slightly;but the thickness of reinforced soil affects the maximum ground surface settlement greatly.2)The maximum ground surface settlement can be reduced by increasing the longitudinal thickness of end soil.3 )The thickness of cover is negatively correlated to the stable coefficient of end soil;and the thickness of reinforced soil and strength of reinforced soil is positively correlated to the stable coefficient of end soil.The results can provide an effective way to decide the scheme of end soil reinforcement in the future.%顶管始发与到达时的端头土体加固是隧道施工成败的关键。对现有的滑移失稳理论做出改进,得出了端头土体纵向加固厚度大于洞口高度时的稳定系数计算公式;使用三维有限元数值模拟,计算拔除洞口 H 型钢支护和机头穿越加固区后的端头土体地表沉降;最后采用正交试验法分析了纵向加固厚度、加固强度和上覆土厚度3种因素对端头土体加固效果影响的主次关系。结果表明:覆土厚度和加固强度对端头土体地表最大沉降值影响并不显著,而加固厚度对其影响很大,

  1. XS-1 Jack Russell

    Science.gov (United States)

    1956-01-01

    NACA High-Speed Flight Station Rocket Shop. Jack Russell, Head of the Rocket Shop preparing to do pressurization tests on the XLR-11 rocket engine. The console provided the readings for the test of the rocket engine systems. 1956 photo

  2. XS-1 Jack Russell

    Science.gov (United States)

    1956-01-01

    NACA High-Speed Flight Station Rocket Shop. Jack Russell, Head of the Rocket Shop preparing to do pressurization tests on the XLR-11 rocket engine. The console provided the readings for the test of the rocket engine systems. 1956 photo

  3. Happy birthday, Jack Steinberger

    CERN Multimedia

    CERN Bulletin

    2016-01-01

    Even if he’s recently stopped coming to CERN on his bike, Jack Steinberger and his piercing blue eyes are still regular visitors to our corridors. As he celebrates his 95th birthday, we pay tribute to one of CERN’s greatest scientists.   Jack Steinberger in 2008, pictured on the occasion of the "Accelerating Nobel" exhibition. (Image: Claudia Marcelloni/CERN) Jack emigrated from Germany to the United States in 1934 to escape the persecution of the Jews. He later went on to study under Enrico Fermi in Chicago and in the 1950s, he contributed to the development of bubble chambers. Using this new detection apparatus, he was involved in the myriad discoveries and results that led to the construction of the Standard Model. In 1961, while at Columbia University (New York), he took part in the first experiment with a high-energy neutrino beam, which gave rise to the discovery of the muon neutrino. This discovery was awarded the&a...

  4. Quality Control Requirements of Curved Jacking Engineering for Glass Fibre Reinforced Plastic Concrete Pipe (FRPCP) with Large Diameter%大口径玻璃纤维增强混凝土管(FRPCP)曲线顶管工程的质量控制

    Institute of Scientific and Technical Information of China (English)

    周仕刚; 朱文国; 薛元德; 徐刚; 邵成猛; 丁玉龙

    2012-01-01

    该文介绍了玻璃纤维增强树脂混凝土管的管壁结构形式,针对凌桥工程曲线压力顶管确定管材的技术要求,同时通过添加玻璃钢丝改善管口处的压缩变形能力,降低顶进过程中应力集中造成管口破坏的可能性.提出了主要原材料的技术要求和生产过程监造技术要求.%Wall structure of FRPCP was introduced, the technical requirements of pressure pipe for curved jacking of Lingqiao project were stated. By adding glass fiber and GRP fiber, the compressive deformation was improved to reduce the possibility of failure of the pipe joint caused by stress concentrations. The technical requirements for raw materials and supervision of the production process are given.

  5. Jack knifing for semivariogram validation

    Directory of Open Access Journals (Sweden)

    Sidney Rosa Vieira

    2010-01-01

    Full Text Available The semivariogram function fitting is the most important aspect of geostatistics and because of this the model chosen must be validated. Jack knifing may be one the most efficient ways for this validation purpose. The objective of this study was to show the use of the jack knifing technique to validate geostatistical hypothesis and semivariogram models. For that purpose, topographical heights data obtained from six distinct field scales and sampling densities were analyzed. Because the topographical data showed very strong trend for all fields as it was verified by the absence of a sill in the experimental semivariograms, the trend was removed with a trend surface fitted by minimum square deviation. Semivariogram models were fitted with different techniques and the results of the jack knifing with them were compared. The jack knifing parameters analyzed were the intercept, slope and correlation coefficient between measured and estimated values, and the mean and variance of the errors calculated by the difference between measured and estimated values, divided by the square root of the estimation variances. The ideal numbers of neighbors used in each estimation was also studied using the jack knifing procedure. The jack knifing results were useful in the judgment of the adequate models fitted independent of the scale and sampling densities. It was concluded that the manual fitted semivariogram models produced better jack knifing parameters because the user has the freedom to choose a better fit in distinct regions of the semivariogram.

  6. Disposition of Glaphyria Nitida Jack (Ericaceae)

    NARCIS (Netherlands)

    Steenis, van C.G.G.J.

    1963-01-01

    The genus Glaphyria Jack (Trans. Linn. Soc. 14, 1823, 128; reimpr. Calc. J. Nat. Hist. 4, 1843, 306) was based on two species, G. nitida Jack from G. Bunko or Sugar Loaf Mt in Bencoolen (neighbourhood of Mt Dempo) and G. sericea Jack, l.c. 129, from Penang 1. Bentham & Hooker (Gen. Pl. 1, 1865, 703)

  7. 65th birthday Jack Steinberger

    CERN Multimedia

    Picasso,E

    1986-01-01

    Laudatio pour Jack Steinberger né le 25 mai 1921, à l'occasion de son 65me anniversaire et sa retraite officielle, pour sa précieuse collaboration au Cern. Néanmoins son principal activité continuera comme avant dans sa recherche au Cern. Plusieurs orateurs prennent la parole (p.ex. E.Picasso) pour le féliciter et lui rendre hommage

  8. Superconformal field theory and Jack superpolynomials

    CERN Document Server

    Desrosiers, Patrick; Mathieu, Pierre

    2012-01-01

    We uncover a deep connection between the N=1 superconformal field theory in 2D and eigenfunctions of the supersymmetric Sutherland model known as Jack superpolynomials (sJacks). Specifically, the singular vector at level rs/2 of the Kac module labeled by the two integers r and s can be obtained explicitly as a sum of sJacks whose indexing diagrams are contained in a rectangle with r columns and s rows. As a second compelling evidence for the distinguished status of the sJack-basis in SCFT, we find that the degenerate Whittaker vectors (Gaiotto states), in both the Neveu-Schwarz and Ramond sectors, can be expressed rather simply in terms of sJacks. As a consequence, we are able to reformulate the supersymmetric version of the (degenerate) AGT conjecture in terms of the combinatorics of sJacks.

  9. A note on the Goodman Jack

    Science.gov (United States)

    Swolfs, H.S.; Kibler, J.D.

    1982-01-01

    A Note on the Goodman Jack: Reconnaissance experiments, performed to evaluate the practical utility of the hard-rock variety of the Goodman Jack, reveal that the Hustrulid-T* correction adequately reconciles the discrepancy between the measured and true deformation modulus of the rock mass in the range of 30 to 50 gigapascals. ?? 1982 Springer-Verlag.

  10. Jacks-of-All-Trades?

    DEFF Research Database (Denmark)

    Huber, Laura Rosendahl; Sloof, Randolph; Van Praag, Mirjam

    education program. Based on pupils' precisely measured level of verbal and mathematical ability, we exogenously compose 179 teams separated into four different types: JAT teams, math-specialist teams, verbal-specialist teams and mixed specialist teams. Our results show that balanced skills are beneficial......Previous empirical studies have shown that solo entrepreneurs benefit from having balanced skills: Jacks-of-All-Trades (JATs) are better entrepreneurs than specialists are. Nowadays however, the majority of entrepreneurs start up and run ventures together in teams. In this paper we test whether...... the effect of more balanced skills is also positive in a team of entrepreneurs. We also explore whether (a lack of) individual balanced skills can be substituted by combining the skills of various specialists within one team. Our field experiment studies teams of children participating in an entrepreneurship...

  11. Beyond Spot Light of Jack Welch

    Institute of Scientific and Technical Information of China (English)

    Mrs.Welsh

    2004-01-01

      Due to Jack Welch's world fame as the most successful CEO, Jack Welch China Forum 2004 drew much attention among China business circle. In order to ensure the anticipated effect, the organizing committee made full use of resources in preparing the event. All the parties involved made thorough preparations and close collaboration. CYTS M.I.C.E. won the bid through heat competition as the sole designated event service agent for the forum, which contributed to Jack Welch's most successful trip to China.……

  12. Beyond Spot Light of Jack Welch

    Institute of Scientific and Technical Information of China (English)

    Mrs.Welsh

    2004-01-01

    @@ Due to Jack Welch's world fame as the most successful CEO, Jack Welch China Forum 2004 drew much attention among China business circle. In order to ensure the anticipated effect, the organizing committee made full use of resources in preparing the event. All the parties involved made thorough preparations and close collaboration. CYTS M.I.C.E. won the bid through heat competition as the sole designated event service agent for the forum, which contributed to Jack Welch's most successful trip to China.

  13. Superconformal minimal models and admissible Jack polynomials

    CERN Document Server

    Blondeau-Fournier, Olivier; Ridout, David; Wood, Simon

    2016-01-01

    We give new proofs of the rationality of the N=1 superconformal minimal model vertex operator superalgebras and of the classification of their modules in both the Neveu-Schwarz and Ramond sectors. For this, we combine the standard free field realisation with the theory of Jack symmetric functions. A key role is played by Jack symmetric polynomials with a certain negative parameter that are labelled by admissible partitions. These polynomials are shown to describe free fermion correlators, suitably dressed by a symmetrising factor. The classification proofs concentrate on explicitly identifying Zhu's algebra and its twisted analogue. Interestingly, these identifications do not use an explicit expression for the non-trivial vacuum singular vector. While the latter is known to be expressible in terms of an Uglov symmetric polynomial or a linear combination of Jack superpolynomials, it turns out that standard Jack polynomials (and functions) suffice to prove the classification.

  14. Who Is Jack Kevorkian, Really?

    Institute of Scientific and Technical Information of China (English)

    John; Corry; 庞必诤

    1999-01-01

    作为一名外科医生,我很重视不断提高自己的英语阅读水平。在国内几家英语刊物中,我对《科技英语学习》另眼相看。她虽然不是专业性的医学刊物,但是,我偶尔还能从贵刊得到若干新鲜的西方的医学和健身知识。而且《科技英语学习》的一个优点是注重诱发和培养读者学习英语的兴趣。我的几个同事都爱读贵刊。 言归正传。今天上“网”,浏览了今年第 4期的美国著名刊物Reader’sDigest,发现佳作一篇。题目是:Who Is Jack Kevorkian,Really?Jack Kevorkian也是一名医生,他已经成为今天美国社会的一个“新闻人物”。 Kevorkian是一个所谓信奉和执行 euthanasia(安乐死)的医生。他自称是“死亡医生”。尸体解剖证明:被他执行“安乐死”的69人中,仅有16人是terminally ill,另外 48名所得的仅是nonterminal disease,而另外 5名则根本是no anatoimcal(解剖的;解剖学的)evidence of disease at all。 Kevorkian认为:a person’s level of suffering and wish to die are moreimportant factors. 对于Kevorkian这样的医生,现在存在两种不同的意见: While supporters of Kevorkian say he is an angel of mercy(怜悯的天使)who helps patients die with dignity,some critics say he is more accuratelydescribed as a se

  15. Solar drying of jack fruit almonds

    OpenAIRE

    Alexandre J. de M. Queiroz; Dantas,Hermeval J; Figueirêdo,Rossana M. F. de; Karla dos S Melo

    2011-01-01

    Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pell...

  16. Appreciating Gantos' Jack Henry as an Archetype.

    Science.gov (United States)

    Watson, Jinx Stapleton

    2001-01-01

    Examines the contemporary realism of the literary character Jack Henry, a middle school child, as representative of two classic literary elements, the quest cycle and the lone hero. Concludes that classic structures of plots and characteristics of hero offer many modern protagonists a shape for their realistic and ordinary adventures. (SG/47)

  17. Jack Sewing Machine Co.,Ltd.

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Jack Sewing Machine Co., Ltd. has a staff of over 1000, of which 83 personals engaged in the development and research,accounting for 8.3% of the total staff. In 2002, the company established a comprehensive center for research and development,integrating the design, sourcing of parts, and the design and manufacturing of uniform together with installation and experiment.

  18. Lively Jack-O'-Lantern Still Life

    Science.gov (United States)

    Sanzaro, Christy

    2010-01-01

    Pumpkin carving is a favorite classroom activity. Around late October, the halls are filled with the sour smell of raw pumpkin innards, as parents, teachers and students are up to their elbows in yellowish strings and slime. These round, orange squash are transformed into jack-o'-lanterns that are placed around the school. The day after Halloween,…

  19. Jack in the Box, Unit 1A

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders

    2011-01-01

    In the assignment known as ‘JACK- in-the-box’ the aim is to foster col- laborative situations through man- aging a complex architectural issue. The aim is to conduct an integrat- ed teaching course that extends from an introductory outline pro- cess through to the project devel- opment phase...

  20. Piping Flexibility

    Science.gov (United States)

    1978-01-01

    A NASA computer program aids Hudson Engineering Corporation, Houston, Texas, in the design and construction of huge petrochemical processing plants like the one shown, which is located at Ju'aymah, Saudi Arabia. The pipes handling the flow of chemicals are subject to a variety of stresses, such as weight and variations in pressure and temperature. Hudson Engineering uses a COSMIC piping flexibility analysis computer program to analyze stresses and unsure the necessary strength and flexibility of the pipes. This program helps the company realize substantial savings in reduced engineering time.

  1. Piping Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell provide architectural and engineering services in planning, design and construction of a wide range of projects all over the world. In design analysis, company regularly uses COSMIC computer programs. In computer testing piping design of a power plant, company uses Pipe Flexibility Analysis Program (MEL-21) to analyze stresses due to weight, temperature, and pressure found in proposed piping systems. Individual flow rates are put into the computer, then computer calculates the pressure drop existing across each component; if needed, design corrections or adjustments can be made and rechecked.

  2. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1994-01-01

    It is approximately 10 years since the Third Edition of Heat Pipes was published and the text is now established as the standard work on the subject. This new edition has been extensively updated, with revisions to most chapters. The introduction of new working fluids and extended life test data have been taken into account in chapter 3. A number of new types of heat pipes have become popular, and others have proved less effective. This is reflected in the contents of chapter 5. Heat pipes are employed in a wide range of applications, including electronics cooling, diecasting and injection mo

  3. 正中下怀--CONVERSE JACK PURCELL IT

    Institute of Scientific and Technical Information of China (English)

    Vincent

    2009-01-01

    在NIKE入主CONVERSE,且Jack Purcell也被全面改款后.如今的Jack Purcell已变得面目全非;从好的方面来讲,厚鞋垫、扁而修身的鞋形大大提升了Jack Purcell的穿着舒适度.而在基本的设定上.CONVERSE更坚持开发更高标准的Jack Purcell.这对换来的却是融合了Old Schoc4风格篮球鞋细节的新型Jack Purcell,除了大量使用漆皮、篮球鞋专用的鞋带扣外,IT版的鞋帮更比原版Jack Purcell Hi高出许多。黑色的选择,则正中潮人下怀。

  4. Piping Connector

    Science.gov (United States)

    1994-01-01

    In Stennis Space Center's Component Test Facility, piping lines carry rocket propellants and high pressure cryogenic fuels. When the lines are chilled to a pretest temperature of 400 degrees below zero, ordinary piping connectors can leak. Under contract to Stennis, Reflange, Inc. developed the T-Con connector, which included a secondary seal that tolerates severe temperature change. Because of the limited need for the large and expensive T-Con product, Reflange also developed the less costly E-Con, a smaller more compact design with the same technical advantages as the T-Con.

  5. Vector-Valued Jack Polynomials from Scratch

    Directory of Open Access Journals (Sweden)

    Jean-Gabriel Luque

    2011-03-01

    Full Text Available Vector-valued Jack polynomials associated to the symmetric group S_N are polynomials with multiplicities in an irreducible module of S_N and which are simultaneous eigenfunctions of the Cherednik-Dunkl operators with some additional properties concerning the leading monomial. These polynomials were introduced by Griffeth in the general setting of the complex reflections groups G(r,p,N and studied by one of the authors (C. Dunkl in the specialization r=p=1 (i.e. for the symmetric group. By adapting a construction due to Lascoux, we describe an algorithm allowing us to compute explicitly the Jack polynomials following a Yang-Baxter graph. We recover some properties already studied by C. Dunkl and restate them in terms of graphs together with additional new results. In particular, we investigate normalization, symmetrization and antisymmetrization, polynomials with minimal degree, restriction etc. We give also a shifted version of the construction and we discuss vanishing properties of the associated polynomials.

  6. Capsicum Annuum L. Lil' Pumpkin and Pepper Jack

    Science.gov (United States)

    The USDA, ARS announces the release of two new pepper cultivars 05C37-3 (trademarked as Lil’ Pumpkin) and 05C69-12 (trademarked as Pepper Jack). Lil’ Pumpkin and Pepper Jack are intended for ornamental applications. Lil’ Pumpkin’s unique black foliage and orange pumpkin-like fruit and Pepper Jack’s ...

  7. Inactivation of jack bean urease by allicin.

    Science.gov (United States)

    Juszkiewicz, Adam; Zaborska, Wiesława; Sepioł, Janusz; Góra, Maciej; Zaborska, Anna

    2003-10-01

    Allicin--diallyl thiosulfinate--is the main biologically active component of freshly crushed garlic. Allicin was synthesized as described elsewhere and was tested for its inhibitory ability against jack bean urease in 20 mM phosphate buffer, pH 7.0 at 22 degrees C. The results indicate that allicin is an enzymatic inactivator. The loss of urease activity was irreversible, time- and concentration dependent and the kinetics of the inactivation was biphasic; each phase, obeyed pseudo-first-order kinetics. The rate constants for inactivation were measured for the fast and slow phases and for several concentrations of allicin. Thiol reagents, and competitive inhibitor (boric acid) protected the enzyme from loss of enzymatic activity. The studies demonstrate that urease inactivation results from the reaction between allicin and the SH-group, situated in the urease active site (Cys592).

  8. Converse Jack Purcell LTT MJ回魂

    Institute of Scientific and Technical Information of China (English)

    米粉

    2009-01-01

    相同的概念、相同的手法.再来一次是否会有重复的感觉?这要看谁来玩.Converse给你的答案是未必。上一次是All Star,这回则是被大家称为“开口笑”的Jack PurceIl。如同前发一样.同是采用了MJ跳《Billie Jean》时所穿的珠片战衣设计.分别推出了黑、银两色,特别在鞋面采用了绸缎材料设计.加上随鞋附送的丝带状鞋带.给众位MJ的粉丝带来一份怀念。

  9. Heat pipes

    CERN Document Server

    Dunn, Peter D

    1982-01-01

    A comprehensive, up-to-date coverage of the theory, design and manufacture of heat pipes and their applications. This latest edition has been thoroughly revised, up-dated and expanded to give an in-depth coverage of the new developments in the field. Significant new material has been added to all the chapters and the applications section has been totally rewritten to ensure that topical and important applications are appropriately emphasised. The bibliography has been considerably enlarged to incorporate much valuable new information. Thus readers of the previous edition, which has established

  10. Advanced jack up rig breaking U.S. construction drought

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, P. [Rowan Companies Inc., Houston, TX (United States)

    1997-03-10

    A new heavy duty jack up, due in mid-1998, will be able to simultaneously drill and produce wells in harsher environments and deeper water than current jack ups in the worldwide fleet. Rowan Cos. Inc.`s Gorilla V is the only mobile offshore drilling unit (MODU) currently under construction in the US. Two more enhanced Gorilla design rigs are planned before the year 2000. The enhanced Gorilla class jack up represents the most technologically advanced jack up unit constructed to date. The rigs are structurally designed to meet year-round weather challenges in the harshest geographical environments. Rising demand for drilling rigs, coupled with a dwindling fleet, is generating supply shortages around the world, particularly at the high-specification end of the market. Even increasing the historical retirement age from 20 to 25 years, rig attrition continues at a level of about 18 rigs per year. Apart from the jack up market per se, however, Rowan`s strategy in designing and building enhanced Gorillas is to improve existing jack up drilling technology and offer the versatility to operate as a drilling unit, a mobile production unit, or both simultaneously in either open water locations or alongside existing platforms. The paper discusses the market for these heavy jack-ups, the use of one on the Cohasset project in Nova Scotia, the Gorilla V and enhanced Gorillas, geographical range of use, and MOPU economics.

  11. An Analytic Formula for the A_2 Jack Polynomials

    Directory of Open Access Journals (Sweden)

    Vladimir V. Mangazeev

    2007-01-01

    Full Text Available In this letter I shall review my joint results with Vadim Kuznetsov and Evgeny Sklyanin [Indag. Math. 14 (2003, 451-482] on separation of variables (SoV for the $A_n$ Jack polynomials. This approach originated from the work [RIMS Kokyuroku 919 (1995, 27-34] where the integral representations for the $A_2$ Jack polynomials was derived. Using special polynomial bases I shall obtain a more explicit expression for the $A_2$ Jack polynomials in terms of generalised hypergeometric functions.

  12. The Making of Two Readers: Agatha Christie and Jack London.

    Science.gov (United States)

    Baghban, Marcia

    1990-01-01

    Looks at the lives of two well-known writers to explore how diverse experiences produce literate adults. Discusses Agatha Christie and Jack London who used reading and writing to earn a living and to gain international reputations. (MG)

  13. Fundamentals of piping design

    CERN Document Server

    Smith, Peter

    2013-01-01

    Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

  14. In conversation with Nobel Laureate Jack Steinberger

    CERN Multimedia

    2011-01-01

    Awarded the 1988 Nobel Prize for Physics for his discovery of the muon neutrino, Jack Steinberger has been part of the CERN establishment for almost 50 years. He recently celebrated his 90th birthday and can still be found in his CERN office on an almost daily basis. If you happened to have a coffee with him… this is what he would tell you: his recollections, and thoughts about the present and future of particle physics.   I’ve been at CERN for 45 years, and I’ve seen this organisation go through a lot. Experiments have grown significantly and so have the aspirations of particle physics. When I did my thesis 64 years ago, I could do it alone in just 6 months and I could get worldwide interesting results. Now, experiments at CERN are made up of hundreds, if not thousands of people, working for 20 years to get a result. My thesis advisor was Enrico Fermi, and in 1953 – unless it was 1952, I’d done my thesis a few years before - he was asked to be t...

  15. 50 Years of ``Scaling'' Jack Kilby's Invention

    Science.gov (United States)

    Doering, Robert

    2008-03-01

    This year is the 50th anniversary of Jack Kilby's 1958 invention of the integrated circuit (IC), for which he won the 2000 Nobel Prize in Physics. Since that invention in a laboratory at Texas Instruments, IC components have been continuously miniaturized, which has resulted in exponential improvement trends in their performance, energy efficiency, and cost per function. These improvements have created a semiconductor industry that has grown to over 250B in annual sales. The process of reducing integrated-circuit component size and associated parameters in a coordinated fashion is traditionally called ``feature-size scaling.'' Kilby's original circuit had active (transistor) and passive (resistor, capacitor) components with dimensions of a few millimeters. Today, the minimum feature sizes on integrated circuits are less than 30 nanometers for patterned line widths and down to about one nanometer for film thicknesses. Thus, we have achieved about five orders of magnitude in linear-dimension scaling over the past fifty years, which has resulted in about ten orders of magnitude increase in the density of IC components, a representation of ``Moore's Law.'' As IC features are approaching atomic dimensions, increasing emphasis is now being given to the parallel effort of further diversifying the types of components in integrated circuits. This is called ``functional scaling'' and ``more then Moore.'' Of course, the enablers for both types of scaling have been developed at many laboratories around the world. This talk will review a few of the highlights in scaling and its applications from R&D projects at Texas Instruments.

  16. Reusable pipe flange covers

    Energy Technology Data Exchange (ETDEWEB)

    Holden, James Elliott (Simpsonville, SC); Perez, Julieta (Houston, TX)

    2001-01-01

    A molded, flexible pipe flange cover for temporarily covering a pipe flange and a pipe opening includes a substantially round center portion having a peripheral skirt portion depending from the center portion, the center portion adapted to engage a front side of the pipe flange and to seal the pipe opening. The peripheral skirt portion is formed to include a plurality of circumferentially spaced tabs, wherein free ends of the flexible tabs are formed with respective through passages adapted to receive a drawstring for pulling the tabs together on a back side of the pipe flange.

  17. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A; Parisher

    2000-01-01

    Pipe designers and drafters provide thousands of piping drawings used in the layout of industrial and other facilities. The layouts must comply with safety codes, government standards, client specifications, budget, and start-up date. Pipe Drafting and Design, Second Edition provides step-by-step instructions to walk pipe designers and drafters and students in Engineering Design Graphics and Engineering Technology through the creation of piping arrangement and isometric drawings using symbols for fittings, flanges, valves, and mechanical equipment. The book is appropriate primarily for pipe

  18. JACK - ANTHROPOMETRIC MODELING SYSTEM FOR SILICON GRAPHICS WORKSTATIONS

    Science.gov (United States)

    Smith, B.

    1994-01-01

    JACK is an interactive graphics program developed at the University of Pennsylvania that displays and manipulates articulated geometric figures. JACK is typically used to observe how a human mannequin interacts with its environment and what effects body types will have upon the performance of a task in a simulated environment. Any environment can be created, and any number of mannequins can be placed anywhere in that environment. JACK includes facilities to construct limited geometric objects, position figures, perform a variety of analyses on the figures, describe the motion of the figures and specify lighting and surface property information for rendering high quality images. JACK is supplied with a variety of body types pre-defined and known to the system. There are both male and female bodies, ranging from the 5th to the 95th percentile, based on NASA Standard 3000. Each mannequin is fully articulated and reflects the joint limitations of a normal human. JACK is an editor for manipulating previously defined objects known as "Peabody" objects. Used to describe the figures as well as the internal data structure for representing them, Peabody is a language with a powerful and flexible mechanism for representing connectivity between objects, both the joints between individual segments within a figure and arbitrary connections between different figures. Peabody objects are generally comprised of several individual figures, each one a collection of segments. Each segment has a geometry represented by PSURF files that consist of polygons or curved surface patches. Although JACK does not have the capability to create new objects, objects may be created by other geometric modeling programs and then translated into the PSURF format. Environment files are a collection of figures and attributes that may be dynamically moved under the control of an animation file. The animation facilities allow the user to create a sequence of commands that duplicate the movements of a

  19. BEAM PIPE IS INSTALLED

    CERN Multimedia

    The installation of the central section of the beam pipe into the heart of the  CMS was completed by 23 April. All the beam pipe elements have been successfully vacuum-tested and the bakeout started.  

  20. Vector-valued Jack polynomials and wavefunctions on the torus

    Science.gov (United States)

    Dunkl, Charles F.

    2017-06-01

    The Hamiltonian of the quantum Calogero-Sutherland model of N identical particles on the circle with 1/r 2 interactions has eigenfunctions consisting of Jack polynomials times the base state. By use of the generalized Jack polynomials taking values in modules of the symmetric group and the matrix solution of a system of linear differential equations one constructs novel eigenfunctions of the Hamiltonian. Like the usual wavefunctions each eigenfunction determines a symmetric probability density on the N-torus. The construction applies to any irreducible representation of the symmetric group. The methods depend on the theory of generalized Jack polynomials due to Griffeth, and the Yang-Baxter graph approach of Luque and the author.

  1. Progress in inflammatory neuropathy -the legacy of Dr Jack Griffin.

    Science.gov (United States)

    Feldman, Eva L; Hughes, Richard A C; Willison, Hugh J

    2015-11-01

    The past quarter of a century has brought incredible advances in our understanding of inflammatory neuropathies, and the insights into Guillain-Barré syndrome (GBS) began in the 1990s with the seminal work of Dr Jack Griffin and his colleagues. In this essay, we provide a tribute to Jack, and review the recent progress in a field that he termed his personal favourite. In particular, we discuss the new developments in our understanding and diagnosis of inflammatory neuropathies, the recent emergence of the node of Ranvier and the paranode as sites of intensive investigation, and the mechanistic evidence that is providing a platform for therapeutic development studies.

  2. Myotonia congenita in a Jack Russell terrier : clinical communication

    Directory of Open Access Journals (Sweden)

    R.G. Lobetti

    2009-05-01

    Full Text Available A 4-month-old male Jack Russell terrier was evaluated for non-painful muscle spasms and collapse associated with exercise and activity. Clinical examination revealed well-defined, non-painful hypertrophic muscles of the fore and hind limbs and exercise and excitement induced hindquarter bunny-hopping gait, which improved with activity but worsened with resting and with any sudden changes in direction of movement. Neurological examination and routine laboratory testing showed no abnormalities. DNA analysis for myotonia congenita showed the dog to have a gene mutation in the chloride ion channel, diagnostic for myotonia congenita, which has not been reported in the Jack Russell terrier breed.

  3. Design and Construction of a Remote Control Car Jack

    Directory of Open Access Journals (Sweden)

    C.S Agu and J.E Igwe

    2016-07-01

    Full Text Available A remote control car jack which will be affordable, simple to maintain and easy to operate was designed and fabricated with locally available materials. Results of the performance test of the car jack conducted with Toyota Camry of weight1359kg, BMW (5series of 1685kg, Mercedes jeep of weight 2355kg and Toyota prado of weight 2555kg showed credible performance by lifting and sustaining the vehicles to heights of 14cm under 1.7mins; 13cm under 2mins; 11cm under 2.2mins and 10cm under 2.4mins respectively.

  4. Psychoanalysis of Jack London's "The Call of the Wild" and "White Fang"

    Science.gov (United States)

    Yang, Hongyan

    2015-01-01

    "The Call of the Wild" and "White Fang" both are masterpieces of Jack London. The protagonists Buck and White Fang are the incarnation of Jack himself to some extent for the two novels reveal a great deal of the writer. This essay aims at psychoanalyzing Jack London's creative process, the Oedipus complex and the confliction…

  5. Impedance modelling of pipes

    Science.gov (United States)

    Creasy, M. Austin

    2016-03-01

    Impedance models of pipes can be used to estimate resonant frequencies of standing waves and model acoustic pressure of closed and open ended pipes. Modelling a pipe with impedance methods allows additional variations to the pipe to be included in the overall model as a system. Therefore an actuator can be attached and used to drive the system and the impedance model is able to include the dynamics of the actuator. Exciting the pipe system with a chirp signal allows resonant frequencies to be measured in both the time and frequency domain. The measurements in the time domain are beneficial for introducing undergraduates to resonances without needing an understanding of fast Fourier transforms. This paper also discusses resonant frequencies in open ended pipes and how numerous texts incorrectly approximate the resonant frequencies for this specific pipe system.

  6. Hydrography and Jack Mackerel stock in the South Pacific

    NARCIS (Netherlands)

    Hintzen, N.T.; Corten, A.A.H.M.; Gerlotto, F.; Brunel, T.P.A.

    2013-01-01

    The study on Hydrography and Jack Mackerel stock (Trachurus murphyi) in the South Pacific is currently one year underway. The main achievement consisted of collecting detailed datasets on Chilean, Peruvian and European fisheries activities and information on the hydrographical / biochemical and envi

  7. Jack Colby Continues Stellar Legacy of APPA Fellows

    Science.gov (United States)

    Thaler-Carter, Ruth E.

    2011-01-01

    This article profiles 2011 APPA Fellow Jack K. Colby, assistant vice chancellor for facilities operations at North Carolina State University. Colby has a history of nonstop service to his profession and to APPA that makes that ever-active, never-stop rabbit look like a piker. Like previous APPA Fellows, Colby could easily rest on his laurels of…

  8. Jack London and "the Call of the Wild"

    Institute of Scientific and Technical Information of China (English)

    徐晶

    2002-01-01

    The article vividly analyzes the characteristics of Jack London's writing theme that is the description of the con-flicts between nature and human. Based on the "call of the wild" and its hero Buck, It points out the author' s writingthoughts, that is strong will human show in their fight against nature.

  9. CONVERSE JACK PURCELL笑容依旧灿烂

    Institute of Scientific and Technical Information of China (English)

    Brian

    2008-01-01

    Converse百周年纪念复刻了100双经典名作,不管是美产还是日产,在近期都引爆了潮流界。这些曾经的经典鞋款的再度复刻也直接让Jack Purcell的人气再度攀升。

  10. JACK LONDON ETNÓLOGO AMATEUR DEL PUGILISMO

    Directory of Open Access Journals (Sweden)

    Loïc Wacquant

    2012-12-01

    Full Text Available De los relatos que Jack London ha consagrado al boxeo, A Piece of Steak es sin dudas aquel que merece hoy nuestra mayor atención, e incluso un lugar en el panteón de los textos literarios sobre el Noble Arte, y junto a él otros tres títulos...

  11. The Authority and Charismas of Jack Ma's Leadership

    Institute of Scientific and Technical Information of China (English)

    陈希

    2014-01-01

    Jack Ma is the top manager of Ali Baba group, with a strong leadership. He mixes autocratic leadership and charismatic leadership together. The powers he used are from his position, the reward system of the company and the charismas to gain his leading power. In addition, he uses his charismas and his achievements to win the trust of the employees, which develop his leadership.

  12. Astronaut Jack Lousma with part of Inflight Medical Support System

    Science.gov (United States)

    1973-01-01

    Astronaut Jack R. Lousma, Skylab 3 pilot, reaches into a medical kit, part of the Inflight Medical Support System (IMSS), during training for the second manned Skylab Earth-orbital mission. This activity took place in the Orbital Workshop (OWS) trainer in the Mission Simulation and Training Facility at JSC.

  13. Analysis of symbolism in Jack London’s A Piece of Steak--A brief analy-sis on contradictory beliefs of Jack London

    Institute of Scientific and Technical Information of China (English)

    周尧

    2014-01-01

    A Piece of Steak is one of Jack London’s short stories in which lots of symbolism usage could be found. Jack London is an American realistic writer who did not receive much formal education. However, he loved reading and was greatly influenced by Spenser, Darwin, Nietzsche, Karl Marx and etc. The influences made Jack London form contradictory beliefs which were shown in this short story.

  14. Heat Pipe Materials Compatibility

    Science.gov (United States)

    Eninger, J. E.; Fleischman, G. L.; Luedke, E. E.

    1976-01-01

    An experimental program to evaluate noncondensable gas generation in ammonia heat pipes was completed. A total of 37 heat pipes made of aluminum, stainless steel and combinations of these materials were processed by various techniques, operated at different temperatures and tested at low temperature to quantitatively determine gas generation rates. In order of increasing stability are aluminum/stainless combination, all aluminum and all stainless heat pipes. One interesting result is the identification of intentionally introduced water in the ammonia during a reflux step as a means of surface passivation to reduce gas generation in stainless-steel/aluminum heat pipes.

  15. Introduction to Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

  16. Heat Pipe Planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2014-01-01

    When volcanism dominates heat transport, a terrestrial body enters a heat-pipe mode, in which hot magma moves through the lithosphere in narrow channels. Even at high heat flow, a heat-pipe planet develops a thick, cold, downwards-advecting lithosphere dominated by (ultra-)mafic flows and contractional deformation at the surface. Heat-pipes are an important feature of terrestrial planets at high heat flow, as illustrated by Io. Evidence for their operation early in Earth's history suggests that all terrestrial bodies should experience an episode of heat-pipe cooling early in their histories.

  17. Non-Symmetric Jack Polynomials and Integral Kernels

    CERN Document Server

    Baker, T H

    1996-01-01

    We investigate some properties of non-symmetric Jack, Hermite and Laguerre polynomials which occur as the polynomial part of the eigenfunctions for certain Calogero-Sutherland models with exchange terms. For the non-symmetric Jack polynomials, the constant term normalization ${\\cal N}_\\eta$ is evaluated using recurrence relations, and ${\\cal N}_\\eta$ is related to the norm for the non-symmetric analogue of the power-sum inner product. Our results for the non-symmetric Hermite and Laguerre polynomials allow the explicit determination of the integral kernels which occur in Dunkl's theory of integral transforms based on reflection groups of type $A$ and $B$, and enable many analogues of properties of the classical Fourier, Laplace and Hankel transforms to be derived. The kernels are given as generalized hypergeometric functions based on non-symmetric Jack polynomials. Central to our calculations is the construction of operators $\\widehat{\\Phi}$ and $\\widehat{\\Psi}$, which act as lowering-type operators for the n...

  18. Explosive welding of pipes

    Energy Technology Data Exchange (ETDEWEB)

    Drennov, O.; Burtseva, O.; Kitin, A. [Russian Federal Nuclear Center, Sarov (Russian Federation)

    2006-08-15

    Arrangement of pipelines for the transportation of oil and gas is a complicated problem. In this paper it is suggested to use the explosive welding method to weld pipes together. This method is rather new. This method can be advantageous (saving material and physical resources) comparing to its static analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. We suggest to perform explosive welding according to the following scheme: the ends of the 2 pipes are connected, the external surfaces are kept at a similar level. A cylindrical steel layer of diameter larger than the pipe diameter is set around the pipe joint and an explosive charge is placed on its external surface. The basic problem is the elimination of strains and reduction of pipe diameter in the area of the dynamic effect. The suggestion is to use water as filler: the volume of pipes in the area adjacent to the zone of explosive welding is totally filled with water. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gas dynamic and elastic-plastic calculations we determined non-deformed mass of water. Model experiments with pipes having radii R = 57 mm confirmed results of the calculations and the possibility in principle to weld pipes by explosion with use of water as filler.

  19. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...

  20. A heat pipe

    Energy Technology Data Exchange (ETDEWEB)

    Rachev, L.A.; Kravtsov, A.A.

    1979-02-08

    A thermal pipe is described which contains a hermetically sealed body with a reticular filler. In order to increase the transmitted thermal power, the pipe is equipped with a high voltage source and with insulators, located between the wall of the body and the filler, where the latter is switched in to the high voltage source, preferably an adjustable one.

  1. Oscillating heat pipes

    CERN Document Server

    Ma, Hongbin

    2015-01-01

    This book presents the fundamental fluid flow and heat transfer principles occurring in oscillating heat pipes and also provides updated developments and recent innovations in research and applications of heat pipes. Starting with fundamental presentation of heat pipes, the focus is on oscillating motions and its heat transfer enhancement in a two-phase heat transfer system. The book covers thermodynamic analysis, interfacial phenomenon, thin film evaporation,  theoretical models of oscillating motion and heat transfer of single phase and two-phase flows, primary  factors affecting oscillating motions and heat transfer,  neutron imaging study of oscillating motions in an oscillating heat pipes, and nanofluid’s effect on the heat transfer performance in oscillating heat pipes.  The importance of thermally-excited oscillating motion combined with phase change heat transfer to a wide variety of applications is emphasized. This book is an essential resource and learning tool for senior undergraduate, gradua...

  2. The monster sound pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-03-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which illustrates how an Internet keyboard can be used to estimate the fundamental pitches of each pipe. Since both pipes have similar end corrections, the pitch discrepancy between the smooth pipe and drainage tube is due to the corrugations, which lower the speed of sound inside the flexible tube, dropping its pitch a semitone.

  3. Study on General Performance of Jack-up Under Elevated Condition

    Institute of Scientific and Technical Information of China (English)

    LI Hong-tao; YANG Qing-xia; LI Ye

    2009-01-01

    Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking sys- tem bearing capacity, pre-load requirements, spud can beating capacity and overturning stability is suggested in this pa- per. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.

  4. Analysis on Jack London's Feminist Point of View in Martin Eden

    Institute of Scientific and Technical Information of China (English)

    陈俊汀

    2016-01-01

    Martin Eden is one of the famous novels of Jack London, who is a distinguished writer in America, and now it still wins great popularity in the whole world. In this novel, the author Jack London depicts the protagonist Martin Eden's striving for success incisively. This thesis, based on the theory of feminism, will give a detailed analysis of the character traits of female characters in Martin Eden and Jack London's attitudes towards women.

  5. Reeling of tight fit pipe

    NARCIS (Netherlands)

    Focke, E.S.

    2007-01-01

    If it would be possible to install Tight Fit Pipe by means of reeling, it would be an attractive new option for the exploitation of offshore oil and gas fields containing corrosive hydrocarbons. Tight Fit Pipe is a mechanically bonded double walled pipe where a corrosion resistant alloy liner pipe

  6. Experimenting with a "Pipe" Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-01-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here…

  7. Pipe drafting and design

    CERN Document Server

    Parisher, Roy A

    2011-01-01

    Pipe Drafting and Design, Third Edition provides step-by-step instructions to walk pipe designers, drafters, and students through the creation of piping arrangement and isometric drawings. It includes instructions for the proper drawing of symbols for fittings, flanges, valves, and mechanical equipment. More than 350 illustrations and photographs provide examples and visual instructions. A unique feature is the systematic arrangement of drawings that begins with the layout of the structural foundations of a facility and continues through to the development of a 3-D model. Advanced chapters

  8. Optimization of Pipe Networks

    DEFF Research Database (Denmark)

    Hansen, C. T.; Madsen, Kaj; Nielsen, Hans Bruun

    1991-01-01

    The paper treats a piping system, where the layout of the network is given but the diameters of the pipes should be chosen among a small number of different values. The cost of realizing the system should be minimized while keeping the energy heads at the nodes above some lower limits. A new...... algorithm using successive linear programming is presented. The performance of the algorithm is illustrated by optimizing a network with 201 pipes and 172 nodes. It is concluded that the new algorithm seems to be very efficient and stable, and that it always finds a solution with a cost near the best...

  9. An electrohydrodynamic heat pipe.

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    A heat pipe of new design, using an electrode structure to orient and guide the dielectric liquid phase flow, is proposed. Analysis indicates that the operation of the electrohydrodynamic heat pipe is in direct analogy to capillary devices, with the polarization force acting in place of capillarity. Advantages of these new heat pipes include greatly reduced liquid friction, electrohydrodynamically enhanced evaporation and condensation heat transfer, and a possible voltage-controlled on/off feature. Preliminary calculations indicate that relatively high performance devices are possible.

  10. Electrohydrodynamic heat pipes.

    Science.gov (United States)

    Jones, T. B.

    1973-01-01

    An electrohydrodynamic heat pipe of radical design is proposed which substitutes polarization electrohydrodynamic force effects for capillarity in collecting, guiding, and pumping a condensate liquid phase. The discussed device is restricted to the use of dielectric liquids as working fluids. Because of the relatively poor thermal transport properties of these liquids, capillary heat pipes using these liquids have not been high performance devices. The employment of the electrohydrodynamic concept should enhance this performance and help fill the performance gap that exists in the temperature range from 250 F to 750 F for 'conventional' capillary heat pipes.

  11. 机翼顶起设计解析%Analysis of the Wing Jacking Design

    Institute of Scientific and Technical Information of China (English)

    王燕玲

    2015-01-01

    It is known that aircraft jacking is an essential operating procedure in aircraft maintenance, and wing jacking plays an important role in aircraft jacking. There are two aspects of wing jacking design:the design of jack-ing pads and the type selection of jacks. Jacking pads and the aircraft structure design are associated and interac-tional with the selection of jacks.%飞机全机顶起是飞机维护时必不可少的操作程序,其中机翼顶起是全机顶起的一个重要组成部分。机翼顶起设计包括两个方面内容,即顶垫设计和机翼千斤顶选型。顶垫设计与顶起点结构设计、机翼千斤顶选型是联合设计、相互影响的。

  12. Visit at PFAFF Silberblau for follow -up of mechanical jacks fabrication for HF

    CERN Multimedia

    Hubert Gerwig

    2000-01-01

    The HF detctor is sitting on either side of the CMS experiment at a height of the beam, 8.79m This detector weighs 220 tons will be lifted in 4 steps on its working position. 4 mechanical jacks with 100t force each will act on each corner of rectangle of 5600mm x 3200mm. The individual main pieces of the jacks are shown here. Next step is the assembly of the jacks by putting together housing, groundplate, spindle, gear, worm gear etc. Delivery of the first 4 jacks in dec.2000

  13. An electrohydrodynamic heat pipe

    Science.gov (United States)

    Jones, T. B.

    1972-01-01

    Dielectric liquid for transfer of heat provides liquid flow from the condenser section to the evaporator section in conventional heat pipes. Working fluid is guided or pumped by an array of wire electrodes connected to a high-voltage source.

  14. Prediction Methods of Spudcan Penetration for Jack-up Units

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ai-xia; DUAN Meng-lan; LI Hai-ming; ZHAO Jun; WANG Jian-jun

    2012-01-01

    Jack-up units are extensively playing a successful role in drilling engineering around the world,and their safety and efficiency take more and more attraction in both research and engineering practice:An accurate prediction of the spudcan penetration depth is quite instrumental in deciding on whether a jack-up unit is feasible to operate at the site.The prediction of a too large penetration depth may lead to the hesitation or even rejection of a site due to potential difficulties in the subsequent extraction process; the same is true of a too small depth prediction due to the problem of possible instability during operation.However,a deviation between predictive results and final field data usually exists,especially when a strong-over-soft soil is included in the strata.The ultimate decision sometimes to a great extent depends on the practical experience,not the predictive results given by the guideline.It is somewhat risky,but no choice.Therefore,a feasible predictive method for the spudcan penetration depth,especially in strata with strong-over-soft soil profile,is urgently needed by the jack-up industry.In view of this,a comprehensive investigation on methods of predicting spudcan penetration is executed.For types of different soil profiles,predictive methods for spudcan penetration depth are proposed,and the corresponding experiment is also conducted to validate these methods.In addition,to further verify the feasibility of the proposed methods,a practical engineering case encountered in the South China Sea is also presented,and the corresponding numerical and experimental results are also presented and discussed.

  15. Silicon Heat Pipe Array

    Science.gov (United States)

    Yee, Karl Y.; Ganapathi, Gani B.; Sunada, Eric T.; Bae, Youngsam; Miller, Jennifer R.; Beinsford, Daniel F.

    2013-01-01

    Improved methods of heat dissipation are required for modern, high-power density electronic systems. As increased functionality is progressively compacted into decreasing volumes, this need will be exacerbated. High-performance chip power is predicted to increase monotonically and rapidly with time. Systems utilizing these chips are currently reliant upon decades of old cooling technology. Heat pipes offer a solution to this problem. Heat pipes are passive, self-contained, two-phase heat dissipation devices. Heat conducted into the device through a wick structure converts the working fluid into a vapor, which then releases the heat via condensation after being transported away from the heat source. Heat pipes have high thermal conductivities, are inexpensive, and have been utilized in previous space missions. However, the cylindrical geometry of commercial heat pipes is a poor fit to the planar geometries of microelectronic assemblies, the copper that commercial heat pipes are typically constructed of is a poor CTE (coefficient of thermal expansion) match to the semiconductor die utilized in these assemblies, and the functionality and reliability of heat pipes in general is strongly dependent on the orientation of the assembly with respect to the gravity vector. What is needed is a planar, semiconductor-based heat pipe array that can be used for cooling of generic MCM (multichip module) assemblies that can also function in all orientations. Such a structure would not only have applications in the cooling of space electronics, but would have commercial applications as well (e.g. cooling of microprocessors and high-power laser diodes). This technology is an improvement over existing heat pipe designs due to the finer porosity of the wick, which enhances capillary pumping pressure, resulting in greater effective thermal conductivity and performance in any orientation with respect to the gravity vector. In addition, it is constructed of silicon, and thus is better

  16. Stuck pipe prediction

    KAUST Repository

    Alzahrani, Majed

    2016-03-10

    Disclosed are various embodiments for a prediction application to predict a stuck pipe. A linear regression model is generated from hook load readings at corresponding bit depths. A current hook load reading at a current bit depth is compared with a normal hook load reading from the linear regression model. A current hook load greater than a normal hook load for a given bit depth indicates the likelihood of a stuck pipe.

  17. The Monster Sound Pipe

    Science.gov (United States)

    Ruiz, Michael J.; Perkins, James

    2017-01-01

    Producing a deep bass tone by striking a large 3 m (10 ft) flexible corrugated drainage pipe immediately grabs student attention. The fundamental pitch of the corrugated tube is found to be a semitone lower than a non-corrugated smooth pipe of the same length. A video (https://youtu.be/FU7a9d7N60Y) of the demonstration is included, which…

  18. Destructive Cholangitis in an Adult Jack Russell Terrier

    Directory of Open Access Journals (Sweden)

    Atsushi Kodama

    2012-01-01

    Full Text Available A 4-year-old female Jack Russell terrier dog exhibited vomiting and severe jaundice of the visible mucous membranes and skin. Ultrasonography revealed diffuse areas of high echogenicity and focal areas of low echogenicity in the left lobe of the liver. On macroscopic observation of the biopsied liver specimen, many scattered irregularly shaped red spots were observed on the liver surface and on the cut surface. Histopathologically, there was loss of the interlobular bile duct and cholangitis accompanied by infiltration of pigment-laden macrophages in the Glisson’s capsule. Therefore, in the present case the dog was diagnosed with destructive cholangitis.

  19. Orthopaedic jack for scoliosis surgery purposes: Concept and design

    Science.gov (United States)

    Supriadi, Sugeng; Radhana, Rakha M.; Hidayanto, Taufik Eko; Whulanza, Yudan; Ali, Notario, Nanda; Rahyussalim

    2017-02-01

    Scoliosis surgery is one of the most difficult orthopedic surgery that have been committed today as the failure rate of orthopedic surgery for adult patients is 15%. Aside from the long duration of surgery, this surgical failure is caused by failure in biomedical instrumentation. Furthermore, this kind of failure is causing inefficiency of the surgery. With current known orthopedic surgery method, three surgeons are needed in a single orthopedic surgery. In fact, a single surgery can take up to 8 hours to be done, which increases the risk of surgical failure. Based on this problem, authors hope that our orthopedic jacks could solve the problem.

  20. Heat pipe dynamic behavior

    Science.gov (United States)

    Issacci, F.; Roche, G. L.; Klein, D. B.; Catton, I.

    1988-01-01

    The vapor flow in a heat pipe was mathematically modeled and the equations governing the transient behavior of the core were solved numerically. The modeled vapor flow is transient, axisymmetric (or two-dimensional) compressible viscous flow in a closed chamber. The two methods of solution are described. The more promising method failed (a mixed Galerkin finite difference method) whereas a more common finite difference method was successful. Preliminary results are presented showing that multi-dimensional flows need to be treated. A model of the liquid phase of a high temperature heat pipe was developed. The model is intended to be coupled to a vapor phase model for the complete solution of the heat pipe problem. The mathematical equations are formulated consistent with physical processes while allowing a computationally efficient solution. The model simulates time dependent characteristics of concern to the liquid phase including input phase change, output heat fluxes, liquid temperatures, container temperatures, liquid velocities, and liquid pressure. Preliminary results were obtained for two heat pipe startup cases. The heat pipe studied used lithium as the working fluid and an annular wick configuration. Recommendations for implementation based on the results obtained are presented. Experimental studies were initiated using a rectangular heat pipe. Both twin beam laser holography and laser Doppler anemometry were investigated. Preliminary experiments were completed and results are reported.

  1. Heat Pipe Integrated Microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

    1999-03-30

    The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached

  2. THE INFLUENCE OF MUSICAL CADENCE INTO AQUATIC JUMPING JACKS KINEMATICS

    Directory of Open Access Journals (Sweden)

    Mário J. Costa

    2011-12-01

    Full Text Available The aim of this study was to analyze the relationships between the head-out aquatic exercise "Jumping jacks" kinematics and the musical cadence in healthy and fit subjects. Five young women, with at least one year of experience conducting head- out aquatic programs were videotaped in the frontal plane, with a pair of cameras providing a double projection (above and below the water surface. Subjects performed an incremental protocol of five bouts (120 b·min-1, 135 b·min-1, 150 b·min-1, 165 b·min-1 and 180 b·min-1 with 16 full cycles of the "Jumping jacks" exercise. Data processing and calculation of upper limbs' (i.e. hands, lower limbs' (i.e. feet and center of mass' 2D linear velocity and displacement were computed with the software Ariel Performance Analysis System and applying the 2D-DLT algorithm. Subjects decreased the cycle period during the incremental protocol. Significant and negative relationships with the musical cadence were verified for the center of mass and upper limbs vertical displacement. On the other hand, for the lower limbs lateral velocity, a significant and positive relationship was observed. It is concluded that expert and fit subjects increase the lower limb's velocity to maintain the range of motion, while the upper limb's displacement is reduced to coupe the music cadence.

  3. Qualitative Research, Semiotics, North Beach, South of Markey, Jack London, and the Grateful Dead.

    Science.gov (United States)

    Shank, Gary

    1999-01-01

    Looks at educational research from a macro perspective, advocating semiotics as the foundation for qualitative research in education. Presents myths and disputations and an open-ended conclusion via the kaleidoscopic interpretations of Jack London, Phil Dick, Jack Kerouac, the Grateful Dead, and an assortment of street characters. (Author/VWL)

  4. 29 CFR 1926.305 - Jacks-lever and ratchet, screw, and hydraulic.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Jacks-lever and ratchet, screw, and hydraulic. 1926.305... Power § 1926.305 Jacks—lever and ratchet, screw, and hydraulic. (a) General requirements. (1) The... secured at once. (ii) Hydraulic jacks exposed to freezing temperatures shall be supplied with an...

  5. Qualitative Research, Semiotics, North Beach, South of Markey, Jack London, and the Grateful Dead.

    Science.gov (United States)

    Shank, Gary

    1999-01-01

    Looks at educational research from a macro perspective, advocating semiotics as the foundation for qualitative research in education. Presents myths and disputations and an open-ended conclusion via the kaleidoscopic interpretations of Jack London, Phil Dick, Jack Kerouac, the Grateful Dead, and an assortment of street characters. (Author/VWL)

  6. Comparison of Sparse and Jack-knife partial least squares regression methods for variable selection

    DEFF Research Database (Denmark)

    Karaman, Ibrahim; Qannari, El Mostafa; Martens, Harald

    2013-01-01

    The objective of this study was to compare two different techniques of variable selection, Sparse PLSR and Jack-knife PLSR, with respect to their predictive ability and their ability to identify relevant variables. Sparse PLSR is a method that is frequently used in genomics, whereas Jack-knife PL...

  7. Investigating the Jack the Ripper Case: Engaging Students in a Criminal Investigations Class through Active Learning

    Science.gov (United States)

    Gutierrez, Daniel; Kazmi, Syed

    2010-01-01

    The present study examines the utilization of a class project involving the Jack the Ripper murders. Students enrolled in a criminal investigations class were required to investigate the five canonical murders associated with the infamous serial killer known as Jack the Ripper and the murders that occurred in London during 1888. This paper…

  8. Study on the Diffraction Patterns of α"-Fe16N2 with Jack-1 and Jack-2 Structural Parameters

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Two body centered tetragonal (bct) crystal structures of α"-Fe16N2 with x=0.25, z=0.3125 (Jack-1) and x=0.222, z=0.306 (Jack-2) respectively, were analyzed theoretically with EMS software package. The simulation of diffraction patterns indicates that both diffraction patterns of the same axis in these two structures obey bcc extinction rule. The conclusion is also obtained from the analyses of the diffracted waves, α"-Fe16N2 precipitates in the diffusion layer of ion-nitrided α-iron have been studied with transmission electron microscope (TEM). We have distinctly observed the electron diffraction patterns of α"-Fe16N2 in [100], [111], [110], [011], [210], [021], [311], [ll3], [331] and [133] zone axes with perfect symmetry, which indicate the parallel orientation relationship with α matrix: α"//α' {100}α"// {100}α. The analyses of diffraction patterns, which obey bcc extinction rule, verify the bct structure of α"-Fe16N2 discovered by X-ray diffraction.

  9. Technological Measures for Pipe Tacking When Meeting with Barriers%顶管遇障碍物处理技术

    Institute of Scientific and Technical Information of China (English)

    赖丹云; 谢伟

    2013-01-01

    With the economic development of economy and t-he continuous expanding of building industry, the pipe jacking technology is applied more and more widely in the engineerin-g projects in the case of limits by construction conditions. It is usual y unavoidable to meet with barriers in the tunneling of p-ipe jacking. As a result of the application of pipe tacking in the certainn power plant in Nansha Section, the technological mea-sures for pipe tacking when meeting with barriers are summ-arized for reference.%  随着经济的发展,建筑业在不断发展。在施工条件限制下,顶管技术在工程中应用越来越多。而顶管在掘进过程中,遇障碍物常是不可避免的。现通过南沙区某电厂顶管技术的应用,总结顶管遇障碍物的处理技术,供借鉴。

  10. Heat pipes and use of heat pipes in furnace exhaust

    Science.gov (United States)

    Polcyn, Adam D.

    2010-12-28

    An array of a plurality of heat pipe are mounted in spaced relationship to one another with the hot end of the heat pipes in a heated environment, e.g. the exhaust flue of a furnace, and the cold end outside the furnace. Heat conversion equipment is connected to the cold end of the heat pipes.

  11. Composite drill pipe

    Science.gov (United States)

    Leslie, James C [Fountain Valley, CA; Leslie, II, James C.; Heard, James [Huntington Beach, CA; Truong, Liem , Josephson; Marvin, Neubert [Huntington Beach, CA; Hans, [Anaheim, CA

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  12. Heat-pipe Earth.

    Science.gov (United States)

    Moore, William B; Webb, A Alexander G

    2013-09-26

    The heat transport and lithospheric dynamics of early Earth are currently explained by plate tectonic and vertical tectonic models, but these do not offer a global synthesis consistent with the geologic record. Here we use numerical simulations and comparison with the geologic record to explore a heat-pipe model in which volcanism dominates surface heat transport. These simulations indicate that a cold and thick lithosphere developed as a result of frequent volcanic eruptions that advected surface materials downwards. Declining heat sources over time led to an abrupt transition to plate tectonics. Consistent with model predictions, the geologic record shows rapid volcanic resurfacing, contractional deformation, a low geothermal gradient across the bulk of the lithosphere and a rapid decrease in heat-pipe volcanism after initiation of plate tectonics. The heat-pipe Earth model therefore offers a coherent geodynamic framework in which to explore the evolution of our planet before the onset of plate tectonics.

  13. Pipe Drafting with CAD. Teacher Edition.

    Science.gov (United States)

    Smithson, Buddy

    This teacher's guide contains nine units of instruction for a course on computer-assisted pipe drafting. The course covers the following topics: introduction to pipe drafting with CAD (computer-assisted design); flow diagrams; pipe and pipe components; valves; piping plans and elevations; isometrics; equipment fabrication drawings; piping design…

  14. PE 100 pipe systems

    CERN Document Server

    Brömstrup, Heiner

    2012-01-01

    English translation of the 3rd edition ""Rohrsysteme aus PE 100"". Because of the considerably increased performance, pipe and pipe systems made from 100 enlarge the range of applications in the sectors of gas and water supply, sewage disposal, industrial pipeline construction and in the reconstruction and redevelopment of defective pipelines (relining). This book applies in particular to engineers, technicians and foremen working in the fields of supply, disposal and industry. Subject matters of the book are all practice-relevant questions regarding the construction, operation and maintenance

  15. 洋革——CONVERSE JACK PURCELL LEATHER

    Institute of Scientific and Technical Information of China (English)

    Vincent

    2009-01-01

    看惯了的Jack Purcell,即使是有些变化.充其量也就是表面的图案创作有异.或者是材料应用方面上的变化。之前我们看过红格子的圣诞变奏版,这次就轮到这双。采用英国绅士洋服的概念为基调,以洋服上的条纹纹理为细节,配上英制高级皮革,黑、啡共两色,用来衬西装都颇为得体。

  16. Jack-o’-lantern(杰克灯)

    Institute of Scientific and Technical Information of China (English)

    霍秀梅

    2015-01-01

    "杰克灯"(Jack-o’-lantern)也叫南瓜灯,是万圣节的重要道具。人们制作的南瓜灯通常都有一双邪恶的眼睛和一张大嘴,并且从中透出飘忽不定的烛光。它的做法也极为简单。将南瓜(pumpkin)掏空,然后在外面刻上笑眯眯的眼睛和大嘴巴,再在瓜中插上一支蜡烛(candle),把它点燃。

  17. 46 CFR 154.503 - Piping and piping system components: Protection from movement.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping and piping system components: Protection from..., Construction and Equipment Cargo and Process Piping Systems § 154.503 Piping and piping system components... cause stresses that exceed the design stresses, the piping and piping system components and cargo...

  18. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  19. Aeronautical tubes and pipes

    Science.gov (United States)

    Beauclair, N.

    1984-12-01

    The main and subcomponent French suppliers of aircraft tubes and pipes are discussed, and the state of the industry is analyzed. Quality control is essential for tubes with regard to their i.d. and metallurgical compositions. French regulations do not allow welded seam tubes in hydraulic circuits unless no other form is available, and then rustproofed steel must be installed. The actual low level of orders for any run of tubes dictates that the product is only one of several among the manufacturers' line. Automation, both in NDT and quality control, assures that the tubes meet specifications. A total of 10 French companies participate in the industry, serving both civil and military needs, with some companies specializing only in titanium, steel, or aluminum materials. Concerns wishing to enter the market must upgrade their equipment to meet the higher aeronautical specifications and be prepared to furnish tubes and pipes that serve both functional and structural purposes simultaneously. Additionally, pipe-bending machines must also perform to tight specifications. Pipes can range from 0.2 mm exterior diameter to 40 mm, with wall thicknesses from 0.02 mm to 3 mm. A chart containing a list of manufacturers and their respective specifications and characteristics is presented, and a downtrend in production with reduction of personnel is noted.

  20. Heat-pipe planets

    Science.gov (United States)

    Moore, William B.; Simon, Justin I.; Webb, A. Alexander G.

    2017-09-01

    Observations of the surfaces of all terrestrial bodies other than Earth reveal remarkable but unexplained similarities: endogenic resurfacing is dominated by plains-forming volcanism with few identifiable centers, magma compositions are highly magnesian (mafic to ultra-mafic), tectonic structures are dominantly contractional, and ancient topographic and gravity anomalies are preserved to the present. Here we show that cooling via volcanic heat pipes may explain these observations and provide a universal model of the way terrestrial bodies transition from a magma-ocean state into subsequent single-plate, stagnant-lid convection or plate tectonic phases. In the heat-pipe cooling mode, magma moves from a high melt-fraction asthenosphere through the lithosphere to erupt and cool at the surface via narrow channels. Despite high surface heat flow, the rapid volcanic resurfacing produces a thick, cold, and strong lithosphere which undergoes contractional strain forced by downward advection of the surface toward smaller radii. We hypothesize that heat-pipe cooling is the last significant endogenic resurfacing process experienced by most terrestrial bodies in the solar system, because subsequent stagnant-lid convection produces only weak tectonic deformation. Terrestrial exoplanets appreciably larger than Earth may remain in heat-pipe mode for much of the lifespan of a Sun-like star.

  1. [Piping cinnamon] 791

    OpenAIRE

    W L H Skeen and Co

    2003-01-01

    279 x 211 mm. Showing female workers making cinnamon pipes. The cinnamon is placed on a low tripod formed from four sticks, and steadied with the operator's foot while the cuticle is scraped off with a small curved knife. Annotated '791' on the bottom right hand corner of the photograph. Date approximate.

  2. 3-D habitat suitability of jack mackerel Trachurus murphyi in the Southeastern Pacific, a comprehensive study

    Science.gov (United States)

    Bertrand, Arnaud; Habasque, Jérémie; Hattab, Tarek; Hintzen, Niels T.; Oliveros-Ramos, Ricardo; Gutiérrez, Mariano; Demarcq, Hervé; Gerlotto, François

    2016-08-01

    South Pacific jack mackerel, Trachurus murphyi, has an ocean-scale distribution, from the South American coastline to New Zealand and Tasmania. This fish, captured by Humans since the Holocene, is nowadays heavily exploited and its population has decreased substantially since the mid-1990s. The uncertainty associated to jack mackerel population structure currently hampers management. Several hypotheses have been proposed from a single population up to several discrete populations. Still no definitive answer was given. Determining how environmental conditions drive jack mackerel distribution can provide insights on its population structure. To do so, here we performed in three steps. First, we used satellite data to develop a statistical model of jack mackerel horizontal habitat suitability. Model predictions based on interaction between temperature and chlorophyll-a match the observed jack mackerel distribution, even during extreme El Niño event. Second, we studied the impact of oxygen and show that jack mackerel distribution and abundance is correlated to oxygen over a wide variety of scales and avoid low oxygen areas and periods. Third, on the basis of the above we built a conceptual 3D model of jack mackerel habitat in the Southeastern Pacific. We reveal the presence of a low suitable habitat along the Chilean and Peruvian coast, figuratively presenting a closed door caused by a gap in the horizontal habitat at ∼19-22°S and a shallow oxycline off south-centre Peru. This kind of situation likely occurs on a seasonal basis, in austral summer but also at longer temporal scales. A lack of exchanges at some periods/seasons partially isolate jack mackerel distributed off Peru. On the other hand the continuity in the habitat during most of the year explains why exchanges occur. We conclude that the more likely population structure for jack mackerel is a pelagic metapopulation.

  3. Léon Lederman, Mel Schwartz and Jack Steinberger wre awarded the 1988 Nobel Physics Prize.

    CERN Multimedia

    Photographic Service

    1988-01-01

    Léon Lederman (left), Mel Schwartz (right) and Jack Steinberger were awarded the 1988 Nobel Physics Prize for their 1962 experiment at Brookhaven which showed that neutrinos come in more than one kind.

  4. The super-Virasoro singular vectors and Jack superpolynomials relationship revisited

    Science.gov (United States)

    Blondeau-Fournier, O.; Mathieu, P.; Ridout, D.; Wood, S.

    2016-12-01

    A recent novel derivation of the representation of Virasoro singular vectors in terms of Jack polynomials is extended to the supersymmetric case. The resulting expression of a generic super-Virasoro singular vector is given in terms of a simple differential operator (whose form is characteristic of the sector, Neveu-Schwarz or Ramond) acting on a Jack superpolynomial. The latter is indexed by a superpartition depending upon the two integers r , s that specify the reducible module under consideration. The corresponding singular vector (at grade rs / 2), when expanded as a linear combination of Jack superpolynomials, results in an expression that (in addition to being proved) turns out to be more compact than those that have been previously conjectured. As an aside, in relation with the differential operator alluded to above, a remarkable property of the Jack superpolynomials at α = - 3 is pointed out.

  5. Teistsugune vaade juhtide tasustamisele / Jack Welch, Suzy Welch ; intervjueerinud Stefan Eiselin

    Index Scriptorium Estoniae

    Welch, Jack

    2010-01-01

    USA juhtimisspetsialistide Jack ja Suzy Welchi hinnangul võib tippjuhtidele makstava palga ümber kerkinud poleemika üks võimalikke põhjuseid lisaks halvale kommunikatsioonile olla ka ideoloogiate kokkusobimatus

  6. Students Learning Physics While Lifting Themselves: A Simple Analysis of a Scissors Jack

    Science.gov (United States)

    Haugland, Ole Anton

    2017-02-01

    Every time I have to jack up my car, I am a bit surprised by how slowly the scissors jack works the higher I raise it, and close to maximum height I need very little force to turn the crank. This agrees well with the principle of simple machines. Since I have to jack up my car at least twice a year to change between winter tires and summer tires, I thought it was time to take a closer look at the physics behind the process. And like most physics teachers, I am always looking for new ideas for my teaching. In this note I will present a few ideas on how a jack can be a topic in physics teaching.

  7. TOPOLOGICAL STRUCTURE AND MOBILITY OF THE MECHANISMS USED IN CAR MECHANICAL JACKS

    Directory of Open Access Journals (Sweden)

    Viorica VELIȘCU

    2015-05-01

    Full Text Available This paper presents a structural analysis of the mechanism of high topological type jack - screw and translator rectilinear- patina and mobility mechanism analysis using various generally applicable formulas.

  8. Teistsugune vaade juhtide tasustamisele / Jack Welch, Suzy Welch ; intervjueerinud Stefan Eiselin

    Index Scriptorium Estoniae

    Welch, Jack

    2010-01-01

    USA juhtimisspetsialistide Jack ja Suzy Welchi hinnangul võib tippjuhtidele makstava palga ümber kerkinud poleemika üks võimalikke põhjuseid lisaks halvale kommunikatsioonile olla ka ideoloogiate kokkusobimatus

  9. A probabilistic tool for geotechnical assessment of Jack-Up leg penetration

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.; Wal, T. van der; Bouwmeester, D.; Peuchen, J.; Baars, S. van; Lagers, G.H.G.

    2007-01-01

    Prediction of jack-up leg penetration behaviour requires assessment of uncertainties in calculation models and their input parameter values, including quality and extent of site investigation information. Commonly, uncertainty assessment is achieved by sensitivity analysis. This publication presents

  10. Modeling of the jack rabbit series of experiments with a temperature based reactive burn model

    Science.gov (United States)

    Desbiens, Nicolas

    2017-01-01

    The Jack Rabbit experiments, performed by Lawrence Livermore National Laboratory, focus on detonation wave corner turning and shock desensitization. Indeed, while important for safety or charge design, the behaviour of explosives in these regimes is poorly understood. In this paper, our temperature based reactive burn model is calibrated for LX-17 and compared to the Jack Rabbit data. It is shown that our model can reproduce the corner turning and shock desensitization behaviour of four out of the five experiments.

  11. The hydraulic performance and structural integrity of A-Jack armour layer

    Institute of Scientific and Technical Information of China (English)

    William G.McDougal

    2010-01-01

    A-Jacks are concrete armor units that are used in both open channel and coastal applications.In open channel applications,they are used for bank and toe protection,flow and grade control,bridge pier scour protection,energy dissipation,and habitat.These small units may be fabricated in standard block machines.In coastal applications,A-Jacks are used in breakwaters,jetties,revetments,and habitat development.Coastal units are generally much larger and more robust than the small open channel units.This paper focuses on coastal applications and in particular,combines results on three topics: (1) recent hydraulic model studies, (2) ahemative fabrication methods,and(3) bundle placement construction methods.Hydraulic models studies were conducted that examined the standard random and uniform placement methods, and also the bundle placement method.In bundle placement, 3~20 A-Jacks are banded together,lifted with a spreader bar, and placed as a single crone pick.This significantly decreases installation time during construction.It also provides a more hydraulically stable placement technique.The hydraulic model tests examined the bundle stability fn random waves for cases where the binding remains in tack and is removed.The geometry of A-Jacks enables a variety of fabrication techniques.One option is to fabricate the A-Jacks as two pieces using flat forms and then grout the two pieces together.Flat forms may be used in conventional block machines for A-Jacks sizes up to 1.3 re.Larger sizes may be wet cast in flat forms or gang forms.The A-Jacks geometry has been recently modified to increase grouting efficient and strength.Large A-Jacks may also be east in a single piece using "clam shell" type forms.

  12. JackEx: The new digital manufacturing resource for optimization of Exoskeleton-based factory environments

    OpenAIRE

    Constantinescu, Carmen; Mureșan, Paul Cristian; Simon, Gabriel-Marian

    2016-01-01

    The employment of Exoskeletons for manual handling work in manufacturing industries aims at increased employment, productivity, safety and security at workplace. This paper highlights several challenges, current results and future steps of our work in optimization of Exoskeleton based factory environments. “JackEx” is the enhancement of the standard digital humanoid “Jack” with concepts and elements of passive Exoskeletons. For the development of JackEx, a new digital manufacturing resource, ...

  13. LHCb: Beam Pipe portrait

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector: it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  14. LHCb: Beam Pipe

    CERN Multimedia

    LHCb, Collaboration

    2005-01-01

    The proton beams circulate in the accelerator in Ultra High Vacuum to make them interact only with each other when colliding at the interaction point. A special beam pipe "holds" the vacuum where they pass through the LHCb detector:it has to be mechanically very strong to stand the difference in pressure between the vacuum inside it and the air in the cavern but also be as transparent as possible for the particles originating in the proton−proton collisions.

  15. Heat Pipe Systems

    Science.gov (United States)

    1988-01-01

    Solar Fundamentals, Inc.'s hot water system employs space-derived heat pipe technology. It is used by a meat packing plant to heat water for cleaning processing machinery. Unit is complete system with water heater, hot water storage, electrical controls and auxiliary components. Other than fans and a circulating pump, there are no moving parts. System's unique design eliminates problems of balancing, leaking, corroding, and freezing.

  16. Pipe inspection using the pipe crawler. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  17. Design and Application of Large Diameter GRP Jacking Pipe in Long Distance Pipe Jacking Construction%大口径长距离玻璃钢顶管的设计与应用

    Institute of Scientific and Technical Information of China (English)

    陈建中; 李卓球; 徐鹏

    2013-01-01

    针对直径为2800 mm、单坑顶进长度为315 m的大口径长距离玻璃钢顶管工程,介绍了顶管施工所需顶力和管材极限顶力的计算方法,给出了不同规范关于顶力安全系数取值,并结合实际施工情况,对施工所需顶力的计算提出了建议.分析了大口径、长距离玻璃钢顶管的结构及工艺设计中的关键性问题,对模具锥度、中继间等具体问题进行了说明.该工程实践结果对玻璃钢顶管的设计具有较强的指导意义,有助于玻璃钢顶管的进一步推广和应用.

  18. 46 CFR 76.33-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.33-15 Section 76.33-15 Shipping COAST GUARD... System, Details § 76.33-15 Piping. (a) Individual pipes shall be not less than 3/4-inch standard pipe size. (b) All piping, valves, and fittings of ferrous materials shall be protected inside and...

  19. Jack Rabbit Pretest Data For TATB Based IHE Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T

    2008-06-18

    The Jack Rabbit Pretest series consisted of 5 focused hydrodynamic experiments, 2021E PT3, PT4, PT5, PT6, and PT7. They were fired in March and April of 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory, Livermore, California. These experiments measured dead-zone formation and impulse gradients created during the detonation of TATB based insensitive high explosive. This document contains reference data tables for all 5 experiments. These data tables include: (1) Measured laser velocimetry of the experiment diagnostic plate (2) Computed diagnostic plate profile contours through velocity integration (3) Computed center axis pressures through velocity differentiation. All times are in microseconds, referenced from detonator circuit current start. All dimensions are in millimeters. Schematic axi-symmetric cross sections are shown for each experiment. These schematics detail the materials used and dimensions of the experiment and component parts. This should allow anyone wanting to evaluate their TATB based insensitive high explosive detonation model against experiment. These data are particularly relevant in examining reactive flow detonation model prediction in computational simulation of dead-zone formation and resulting impulse gradients produced by detonating TATB based explosive.

  20. Irreversible inhibition of jack bean urease by pyrocatechol.

    Science.gov (United States)

    Kot, Mirosława; Zaborska, Wiesława

    2003-10-01

    Pyrocatechol was studied as an inhibitor of jack bean urease in 20 mM phosphate buffer, pH 7.0, 25 degrees C. The inhibition was monitored by an incubation procedure in the absence of substrate and reaction progress studies in the presence of substrate. It was found that pyrocatechol acted as a time- and concentration dependent irreversible inactivator of urease. The dependence of the residual activity of urease on the incubation time showed that the rate of inhibition increased with time until there was total loss of enzyme activity. The inactivation process followed a non-pseudo-first order reaction. The obtained reaction progress curves were found to be time-dependent. The plots showed that the rate of the enzyme reaction in the final stages reached zero. From protection experiments it appeared that thiol-compounds such as L-cysteine, 2-mercaptoethanol and dithiothreitol prevented urease from pyrocatechol inactivation as well as the substrate, urea, and the competitive inhibitor boric acid. These results proved that the urease active site was involved in the pyrocatechol inactivation.

  1. Jack Mosby en la revuelta de 1911 en Baja California

    Directory of Open Access Journals (Sweden)

    Lawrence Douglas Taylor

    2000-01-01

    Full Text Available En el presente artículo se analiza el papel que desempeñó el estadounidense John R. Mosby, conocido popularmente como Jack Mosby, en la revuelta de 1911 en Baja California encabezada por Ricardo Flores Magón y el Partido Liberal Mexicano. Mosby fue uno de los personajes más interesantes y controvertidos de esta campaña. Militar de profesión, también era miembro de los Industrial Workers of the World (Trabajadores Industriales del Mundo , una organización laboral radical de Estados Unidos que contribuyó a la defensa legal de los miembros de la junta dirigente del P L M, acusados por las autoridades estadounidenses de haber violado las leyes de neutralidad. Se examina la postura de Mosby a lo largo de la lucha, incluyendo las raíces de su apoyo entre los hombres de la Segunda División de los grupos armados liberales en la Baja California, su decisión de sostener los principios de Ricardo Flores Magón y del P L M, así como su determinación de continuar la lucha en la región aun cuando la derrota era casi inevitable.

  2. Experimenting with a ``Pipe'' Whistle

    Science.gov (United States)

    Stafford, Olga

    2012-04-01

    A simple pipe whistle can be made using pieces of PVC pipe. The whistle can be used to measure the resonant frequencies of open or closed pipes. A slightly modified version of the device can be used to also investigate the interesting dependence of the sound frequencies produced on the orifice-to-edge distance. The pipe whistle described here allows students in a physics of music or introductory physics course to study an example of an "edge tone" device that produces discrete sound frequencies. From their textbooks, students likely know about standing waves produced by pipes or strings, as well as the resonant frequencies for open and closed pipes. To go a bit further, they can also learn how the frequency of the sound wave depends on the orifice-to-edge distance of the wind instrument.

  3. Multileg Heat-Pipe Evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-01-01

    Parallel pipes provide high heat flow from small heat exchanger. Six parallel heat pipes extract heat from overlying heat exchanger, forming evaporator. Vapor channel in pipe contains wick that extends into screen tube in liquid channel. Rods in each channel hold wick and screen tube in place. Evaporator compact rather than extended and more compatible with existing heat-exchanger geometries. Prototype six-pipe evaporator only 0.3 m wide and 0.71 m long. With ammonia as working fluid, transports heat to finned condenser at rate of 1,200 W.

  4. Study of Movement Reliability for Hoisting Jack under a Rocket Launcher Vehicle%Study of Movement Reliability for Hoisting Jack under a Rocket Launcher Vehicle

    Institute of Scientific and Technical Information of China (English)

    LI Ye-nong; PENG Shu-hua; ZHANG Li-ping; SHI Zhu-kang

    2011-01-01

    The transmission mechanism of a jack is required to support the combat vehicle reliably within a very short time. So reliability research is very important because the mechanism completes motions required under the conditions within limited time. If the transmission mechanism of the jack supports the rocket launcher steadily, it needs to go through several stages as follows : unlocking, starting, operating, braking, stopping, fixing position and locking. The transmission mechanism of the jack is a complicated and single degree of freedom mechanical system; it can be considered an imaginary mechanical model that has an equivalent moment of inertia and equivalent torque. According to the characteristics of each supporting stages, dynamics equations of the mechanism are established. At the stages of starting and operating, a driving moment and resistance moment are dealt with for a Normal distribution. The design principles for movement reliability of completing action are established and the design principles for time reliability of completing action within a limited time are established. Finally, movement reliability of the transmission mechanism of the jack is 0. 9 852, according to our calculation. Reliability of time to complete action is 0. 9 943.

  5. Large-bore pipe decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Ebadian, M.A.

    1998-01-01

    The decontamination and decommissioning (D and D) of 1200 buildings within the US Department of Energy-Office of Environmental Management (DOE-EM) Complex will require the disposition of miles of pipe. The disposition of large-bore pipe, in particular, presents difficulties in the area of decontamination and characterization. The pipe is potentially contaminated internally as well as externally. This situation requires a system capable of decontaminating and characterizing both the inside and outside of the pipe. Current decontamination and characterization systems are not designed for application to this geometry, making the direct disposal of piping systems necessary in many cases. The pipe often creates voids in the disposal cell, which requires the pipe to be cut in half or filled with a grout material. These methods are labor intensive and costly to perform on large volumes of pipe. Direct disposal does not take advantage of recycling, which could provide monetary dividends. To facilitate the decontamination and characterization of large-bore piping and thereby reduce the volume of piping required for disposal, a detailed analysis will be conducted to document the pipe remediation problem set; determine potential technologies to solve this remediation problem set; design and laboratory test potential decontamination and characterization technologies; fabricate a prototype system; provide a cost-benefit analysis of the proposed system; and transfer the technology to industry. This report summarizes the activities performed during fiscal year 1997 and describes the planned activities for fiscal year 1998. Accomplishments for FY97 include the development of the applicable and relevant and appropriate regulations, the screening of decontamination and characterization technologies, and the selection and initial design of the decontamination system.

  6. Deployable Pipe-Z

    Science.gov (United States)

    Zawidzki, Machi

    2016-10-01

    This paper presents a concept of deployable Pipe-Z (dPZ): a modular structural system which takes advantage of the robustness of rigid-panel mechanism and allows to create free-form links which are also reconfigurable and deployable. The concept presented can be applied for building habitats and infrastructures for human exploration of oceans and outer space. dPZ structures can adapt to changing requirements e.g. mission objectives, crew condition and technological developments. Furthermore, such lightweight and adaptable structural concept can assist in sustainable exploration development. After brief introduction, the concept of Pipe-Z (PZ) is presented. Next, the reconfigurability of PZ is explained and illustrated with continuous and collision-free transition from a PZ forming a Trefoil knot to a Figure-eight knot. The following sections introduce, explain and illustrate the folding mechanism of a single foldable Pipe-Z module (fPZM) and entire dPZ structure. The latter is illustrated with asynchronous (delayed) unfolding of a relatively complex Unknot. Several applications of PZ are suggested, namely for underwater and deep-space and surface habitats, for permanent, but in particular, temporary or emergency passages. As an example, a scenario of a failure of one of the modules of the International Space Station is presented where a rigid structure of 40 fPZMs bypasses the "dead link". A low-fidelity prototype of a 6-module octagonal dPZ is presented; several folding schemes including concentric toric rings are demonstrated. Practical issues of pressurization and packing are briefly discussed.

  7. Additive and non-additive genetic components of the jack male life history in Chinook salmon (Oncorhynchus tshawytscha).

    Science.gov (United States)

    Forest, Adriana R; Semeniuk, Christina A D; Heath, Daniel D; Pitcher, Trevor E

    2016-08-01

    Chinook salmon, Oncorhynchus tshawytscha, exhibit alternative reproductive tactics (ARTs) where males exist in two phenotypes: large "hooknose" males and smaller "jacks" that reach sexual maturity after only 1 year in seawater. The mechanisms that determine "jacking rate"-the rate at which males precociously sexually mature-are known to involve both genetics and differential growth rates, where individuals that become jacks exhibit higher growth earlier in life. The additive genetic components have been studied and it is known that jack sires produce significantly more jack offspring than hooknose sires, and vice versa. The current study was the first to investigate both additive and non-additive genetic components underlying jacking through the use of a full-factorial breeding design using all hooknose sires. The effect of dams and sires descendant from a marker-assisted broodstock program that identified "high performance" and "low performance" lines using growth- and survival-related gene markers was also studied. Finally, the relative growth of jack, hooknose, and female offspring was examined. No significant dam, sire, or interaction effects were observed in this study, and the maternal, additive, and non-additive components underlying jacking were small. Differences in jacking rates in this study were determined by dam performance line, where dams that originated from the low performance line produced significantly more jacks. Jack offspring in this study had a significantly larger body size than both hooknose males and females starting 1 year post-fertilization. This study provides novel information regarding the genetic architecture underlying ARTs in Chinook salmon that could have implications for the aquaculture industry, where jacks are not favoured due to their small body size and poor flesh quality.

  8. HPFRCC - Extruded Pipes

    DEFF Research Database (Denmark)

    Stang, Henrik; Pedersen, Carsten

    1996-01-01

    as well as structural design. Material development was carried out considering both processing requirements as well as mechanical properties of the hardened material. A micro-mechanical model for the non-linear material behavior of the hardened material based on the stress-crack width or the $\\sigma...... itself. The structural modeling of the pipe was done making direct use of the $\\sigma-w$ material characterization. The processing technique developed is a novel type of extrusion combiningease of material mixing and few requirements for material pre-processingwith a high degree of accuracy and stability...

  9. ABSTRACTS WELDEL PIPE AND TUBE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    ABSTRACTS WELDEL PIPE AND TUBE Vol.24 No.3 May.2001 Huang Jingan(1) Strengthen, Intercourse, Coordination and Promote the Development Together Liang Aiyu(11) The Production and the Development of the Water supply pipe for City Construction From the aspects of the quality, appearance, environment protection, economic analysis etc., This article evaluates the galvanized pipe, plastic steel complex pipe, plastic aluminum pipe, stainless pipe for city water supply. In accordance with the requirements of the city construction programming and development, it is considered that the plastic aluminum pipe and plastic steel pipe instead of galvanization pipe is the trend of the development. The author also gives some constructive proposals for reference. Subject Terms:galvanized pipe complex pipe stainless pipe city water supply evaluation Zhao Rongbin,Li Guangjun(14) The TIG welding of Protected Tantalum-pipe for sheathed thermocouples used in corrosive environment The protected Tantalum-pipe welding of sheathed therocouples was investigated by TIG. The welding process and its key parameters were introduced. Welding quality influenced by processing was discussed. Subject Terms:welding protected Tantalum-pipe corrosion He Defu et al(18) Design and Research for An Automatic MIG Welding Machine of Catalyst Converter of Automobile Two different schemes for automatic MIG welding of catalyst converter of automobile have been compared and analysed. A design of automatic MIG welding machine used for catalyst converter of automobile has been suggested in this paper. Subject Terms:environmental protection automobile tri-catalyst converter MIG welding automatic welding PLC Fang Chucai(24) Cold Crack Analysis of Low Alloy High Strength Steel Weld Seam Heat Affected Area During the welding of low alloy high strength (X65 and above), the fine crack occurs in the weld (especially inner weld) and the low plastic hard brickle structure occurs in the Heat Affected Area (HAZ) sometime. This

  10. Heat Pipe Blocks Return Flow

    Science.gov (United States)

    Eninger, J. E.

    1982-01-01

    Metal-foil reed valve in conventional slab-wick heat pipe limits heat flow to one direction only. With sink warmer than source, reed is forced closed and fluid returns to source side through annular transfer wick. When this occurs, wick slab on sink side of valve dries out and heat pipe ceases to conduct heat.

  11. Mechanical Behaviour of Lined Pipe

    NARCIS (Netherlands)

    Hilberink, A.

    2011-01-01

    Installing lined pipe by means of the reeling installation method seems to be an attractive combination, because it provides the opportunity of eliminating the demanding welds from the critical time offshore and instead preparing them onshore. However, reeling of lined pipe is not yet proven

  12. Temperature drops in heat pipes

    Energy Technology Data Exchange (ETDEWEB)

    Saatci, A.M.; Khalifa, A.M.A.; Akyurt, M.

    1986-01-01

    The role of entrainment in limiting heat pipe power handling capacity is discussed. The effect of entrainment on the measured temperature field in the integral heat pipe of a split system solar cooker is analyzed. An experimental set-up depicting a heat loop is presented, along with test results.

  13. Promethus Hot Leg Piping Concept

    Energy Technology Data Exchange (ETDEWEB)

    AM Girbik; PA Dilorenzo

    2006-01-24

    The Naval Reactors Prime Contractor Team (NRPCT) recommended the development of a gas cooled reactor directly coupled to a Brayton energy conversion system as the Space Nuclear Power Plant (SNPP) for NASA's Project Prometheus. The section of piping between the reactor outlet and turbine inlet, designated as the hot leg piping, required unique design features to allow the use of a nickel superalloy rather than a refractory metal as the pressure boundary. The NRPCT evaluated a variety of hot leg piping concepts for performance relative to SNPP system parameters, manufacturability, material considerations, and comparison to past high temperature gas reactor (HTGR) practice. Manufacturability challenges and the impact of pressure drop and turbine entrance temperature reduction on cycle efficiency were discriminators between the piping concepts. This paper summarizes the NRPCT hot leg piping evaluation, presents the concept recommended, and summarizes developmental issues for the recommended concept.

  14. Investigation of jack-up leg extension for deep water operations

    Directory of Open Access Journals (Sweden)

    Yousri M.A. Welaya

    2015-03-01

    Full Text Available Since the first jack-up was built, jackups have become the most popular type of mobile offshore drilling unit (MODU for offshore exploration and development purposes in shallow water. The most pivotal component of the jack-up unit is the leg, which can directly affect the global performance of the unit. In this paper, an investigation into extending the length of the jack up leg is carried out in order to study the enhancement of the rig capability to drill in deeper water approaching the range of the Semisubmersible Drilling Unit (SSDU (300-1000ft. A study of the performance of a deep-water jack-up unit is performed with different leg lengths. Typical leg scantling dimensions and identical external loads are assigned, and then a detailed Finite Element Analysis (FEA model is created in order to simulate the jack-up leg unit’s structural behavior. A Multi-point Constraint (MPC element together with the spring element is used to deal with the boundary conditions. Finally, a comparative analysis for five leg lengths is carried out to illustrate their performance, including the ultimate static strength, and weight.

  15. Assessment of the mechanical properties of brick masonry by a flat-jack method

    Directory of Open Access Journals (Sweden)

    S.V. Zubkov

    2015-12-01

    Full Text Available The modern Russian methods for defining the mechanical characteristics of brick masonry are based on finding the strength of masonry components (brick and mortar. After getting the results of laboratory tests of components, mechanical characteristics of masonry are calculated using empirical formulae. Those formulae, however, cannot take into consideration the presence of damages and other factors. Obtaining the characteristics (strength and deformation by a direct flat-jack test of masonry fragments on-site looks promising. A widespread use of FEM requires setting accurate deformation features for modeling domes, arches and thin brick outside layer in multilayer walls. Also accurate deformation characteristics are used for calculating temperature loads. The paper gives the results of practical use for the masonry deformation research by the flat-jack test method. The correlation factors are defined and rigidness coefficients of flat-jacks are obtained in the study.

  16. Rapid communication: experimental evidence that juvenile pelagic jacks (Carangidae) respond behaviorally to DMSP.

    Science.gov (United States)

    Debose, Jennifer L; Nevitt, Gabrielle A; Dittman, Andrew H

    2010-03-01

    Dimethylsulfoniopropionate (DMSP) is produced by marine algae and released during foraging activity by zooplankton and fish. Pelagic fishes depend on patchily distributed foraging opportunities, and DMSP may be an important signaling molecule for these events. We have previously shown that the abundance of carangid jacks is positively associated with elevated DMSP levels over coral reefs in the Gulf of Mexico, suggesting that these fishes may use spatial and temporal variation in DMSP to locate foraging opportunities. Here, we extend this work by demonstrating that juveniles of two species of pelagic jack, crevalle jack, Caranx hippos, and bluefin trevally, C. melampygus, detect and respond to DMSP in a flow-through tank in the laboratory. Juveniles of these species showed elevated swimming activity in response to ecologically relevant concentrations of DMSP (10(-9) M). These results provide further evidence that this chemical may serve as a chemosensory cue for carangid species.

  17. Variable amplitude corrosion fatigue and fracture mechanics of weldable high strength jack-up steels

    Science.gov (United States)

    Etube, Linus Sone

    The tubular welded joints used in the construction of Offshore structures can experience millions of variable amplitude wave induced stress cycles during their operational life. Fatigue has been identified as the main cause of degradation of structural integrity in these structures. As a result, fatigue is an important consideration in their design. Jack-up legs are made from a range of high strength steels with yield strengths up to TOOMPa. These steels are thought to exhibit fatigue resistance properties which are different when compared with conventional fixed platform steels such as BS 4360 50D and BS 7191 355D. The difference in their behaviour was heightened by the discovery, in the late 80s and early 90s, of extensive cracking around the spud can regions of several Jack-ups operating in the North Sea. It was thought that these steels may be more susceptible to hydrogen cracking and embrittlement. There was the additional requirement to study their behaviour under realistic loading conditions typical of the North Sea environment. This thesis contains results of an investigation undertaken to assess the performance of a typical high strength weldable Jack-up steel under realistic loading and environmental conditions. Details of the methodology employed to develop a typical Jack-up Offshore Standard load History (JOSH) are presented. The factors which influence fatigue resistance of structural steels used in the construction of Jack-up structures are highlighted. The methods used to model the relevant factors for inclusion in JOSH are presented with particular emphasis on loading and structural response interaction. Results and details of experimental variable amplitude corrosion fatigue (VACF) tests conducted using JOSH are reported and discussed with respect to crack growth mechanisms in high strength weldable Jack-up steels. Different fracture mechanics models for VACF crack growth prediction are compared and an improved generalised methodology for fast

  18. 46 CFR 95.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.15-15 Section 95.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 95.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  19. 46 CFR 154.520 - Piping calculations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping calculations. 154.520 Section 154.520 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Process Piping Systems § 154.520 Piping calculations. A piping system must be designed to meet...

  20. 46 CFR 108.475 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 108.475 Section 108.475 Shipping COAST GUARD... Extinguishing Systems Foam Extinguishing Systems § 108.475 Piping. (a) Each pipe, valve, and fitting in a foam... to remove liquid from the system. (e) Piping in a foam extinguishing system must be used only...

  1. 14 CFR 27.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 27.1123 Section 27.1123... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Exhaust System § 27.1123 Exhaust piping. (a) Exhaust piping... operating temperatures. (b) Exhaust piping must be supported to withstand any vibration and inertia loads...

  2. 46 CFR 197.336 - Pressure piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pressure piping. 197.336 Section 197.336 Shipping COAST... GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.336 Pressure piping. Piping systems that... must— (a) Meet the ANSI Code; (b) Have the point of connection to the integral piping system of...

  3. 46 CFR 64.95 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping. 64.95 Section 64.95 Shipping COAST GUARD... SYSTEMS Cargo Handling System § 64.95 Piping. (a) Piping, valves, flanges, and fittings used in the... the piping system must comply with § 56.60-25(c) of this chapter....

  4. 46 CFR 76.23-20 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.23-20 Section 76.23-20 Shipping COAST GUARD... System, Details § 76.23-20 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  5. 46 CFR 95.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.17-15 Section 95.17-15 Shipping COAST GUARD... Extinguishing Systems, Details § 95.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of Subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  6. 46 CFR 76.17-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.17-15 Section 76.17-15 Shipping COAST GUARD... Systems, Details § 76.17-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  7. 46 CFR 193.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.15-15 Section 193.15-15 Shipping COAST GUARD... Dioxide Extinguishing Systems, Details § 193.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 pounds per square inch. (b) All piping, in nominal...

  8. Investigation of high-frequency pipe welding

    Science.gov (United States)

    Konovalov, Nikolai A.; Lakhno, Nikolay I.; Gushchin, A. G.; Putryk, N. D.; Kovalenko, Vladimir I.; Galkina, V. A.; Veselovsky, Vladimir B.; Furmanov, Valeri B.; Kovika, Nikolai D.; Novikov, Leonid V.; Shcherbina, V. N.

    1993-01-01

    For investigation of a pipe welding process at high-frequency heating aimed at increasing of pipe quality and decreasing of spoilage, the use of high-speed recording and TV-technique is considered to be effective. The authors have created a visual inspection system for pipe welding process studies at a tube mill of the Novomoskovsk Pipe Plant.

  9. 49 CFR 192.281 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.281 Section 192.281... Plastic pipe. (a) General. A plastic pipe joint that is joined by solvent cement, adhesive, or heat fusion may not be disturbed until it has properly set. Plastic pipe may not be joined by a threaded joint...

  10. 49 CFR 195.114 - Used pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Used pipe. 195.114 Section 195.114 Transportation... PIPELINE Design Requirements § 195.114 Used pipe. Any used pipe installed in a pipeline system must comply with § 195.112 (a) and (b) and the following: (a) The pipe must be of a known specification and the...

  11. 49 CFR 195.112 - New pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false New pipe. 195.112 Section 195.112 Transportation... PIPELINE Design Requirements § 195.112 New pipe. Any new pipe installed in a pipeline system must comply with the following: (a) The pipe must be made of steel of the carbon, low alloy-high strength, or alloy...

  12. 49 CFR 192.55 - Steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Steel pipe. 192.55 Section 192.55 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.55 Steel pipe. (a) New steel pipe is... in accordance with paragraph (c) or (d) of this section. (b) Used steel pipe is qualified for use...

  13. Loop Heat Pipe Startup Behaviors

    Science.gov (United States)

    Ku, Jentung

    2016-01-01

    A loop heat pipe must start successfully before it can commence its service. The startup transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe startup behaviors. Topics include the four startup scenarios, the initial fluid distribution between the evaporator and reservoir that determines the startup scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power startup, and methods to enhance the startup success. Also addressed are the pressure spike and pressure surge during the startup transient, and repeated cycles of loop startup and shutdown under certain conditions.

  14. Solar drying of jack fruit almonds Secagem solar de amêndoas de jaca

    OpenAIRE

    Alexandre J. de M. Queiroz; Dantas,Hermeval J; Figueirêdo,Rossana M. F. de; Karla dos S Melo

    2011-01-01

    Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pell...

  15. Structure and biomass production of one- to seven-year-old intensively cultured jack pine plantation in Wisconsin.

    Science.gov (United States)

    J. Zavitkovski; David H. Dawson

    1978-01-01

    Spacing and rotation length effects were studied for 7 years in intensively cultured jack pine stands. Production culminated at age 5 in the densest planting and progressively later in more open spacing. Biomass production was two to several times higher than in jack pine plantations grown under traditional silvicultural systems.

  16. Experiment-based relations between level ice loads and managed ice loads on an Artic jack-up structure

    NARCIS (Netherlands)

    Hoving, J.S.; Vermeulen, R.; Mesu, A.W.; Cammaert, A.B.

    2013-01-01

    Jack-ups have been constructed for numerous ocean environments, but to date there has been no operating experience under Arctic sea ice conditions. The current state of jack-up technology does not allow working outside the ice-free season and thus ice management will be needed to extend the drilling

  17. Experiment-based relations between level ice loads and managed ice loads on an Artic jack-up structure

    NARCIS (Netherlands)

    Hoving, J.S.; Vermeulen, R.; Mesu, A.W.; Cammaert, A.B.

    2013-01-01

    Jack-ups have been constructed for numerous ocean environments, but to date there has been no operating experience under Arctic sea ice conditions. The current state of jack-up technology does not allow working outside the ice-free season and thus ice management will be needed to extend the drilling

  18. Estudo da impressão plantar obtida durante o teste de Jack em crianças Footprint study in children during the Jack test

    Directory of Open Access Journals (Sweden)

    José Antonio Pinto

    2011-01-01

    Full Text Available OBJETIVO: Avaliar as impressões plantares durante o teste de Jack em crianças quantificando e observando os resultados numa faixa etária crítica para a formação do arco plantar. MÉTODO: Avaliamos 60 crianças brancas (120 pés sendo 35 meninos e 25 meninas com idades entre 2 e 5 anos, sem queixas ortopédicas. Simulamos o teste de Jack com uma órtese em cunha de 45º apoiada sob o hálux. Obtivemos impressões em apoio monopodálico bilateralmente utilizando um pedígrafo. O exame dividiu-se em duas etapas: com e sem o uso da órtese. A metodologia de Valenti e Volpon foi utilizada para mensurar as impressões plantares e os dados obtidos foram analisados estatisticamente. RESULTADOS: Os valores dos índices de Valenti e Volpon diminuiram quando a órtese foi utilizada. A diferença entre os índices com ou sem órtese diminuiu gradualmente com a progressão etária. CONCLUSÕES: É possível quantificar o teste de Jack pelwas impressões plantares pelo método de Valenti e Volpon. A variação do seu formato apresentou tendência a ser menor a partir dos 4 anos. O teste de Jack perdeu gradativamente a capacidade de modificar a impressão plantar com a idade, diminuindo sua acuidade como parâmetro de bom prognóstico na formação do arco longitudinal medial. Nível de Evidência: Nível IV, estudo descritivo observacional.OBJECTIVE: To assess the plantar impressions obtained in children during the Jack test, with the aim of quantifying and analyzing their variability in the critical period for plantar foot arch formation. METHOD: A hundred and twenty feet from 60 healthy White children, recruited in an outpatient pediatric clinic, were examined. Our sample included 35 boys and 25 girls, ranging from 2 to 5 years. The Jack test was simulated using a 45o wedge-shaped orthosis applied to the hallux. Bilateral plantar impressions were acquired in the alternate single-foot standing position using a pedigraph. Two plantar impressions were

  19. Nitrogen heat pipe for cryocooler thermal shunt

    Energy Technology Data Exchange (ETDEWEB)

    Prenger, F.C.; Hill, D.D.; Daney, D.E.; Daugherty, M.A. [Los Alamos National Lab., NM (United States); Green, G.F.; Roth, E.W. [Naval Surface Warfare Center, Annapolis, MD (United States)

    1995-09-01

    A nitrogen heat pipe was designed, built and tested for the purpose of providing a thermal shunt between the two stages of a Gifford-McMahan (GM) cryocooler during cooldown. The nitrogen heat pipe has an operating temperature range between 63 and 123 K. While the heat pipe is in the temperature range during the system cooldown, it acts as a thermal shunt between the first and second stage of the cryocooler. The heat pipe increases the heat transfer to the first stage of the cryocooler, thereby reducing the cooldown time of the system. When the heat pipe temperature drops below the triple point, the nitrogen working fluid freezes, effectively stopping the heat pipe operation. A small heat leak between cryocooler stages remains because of axial conduction along the heat pipe wall. As long as the heat pipe remains below 63 K, the heat pipe remains inactive. Heat pipe performance limits were measured and the optimum fluid charge was determined.

  20. Analisis Integritas Struktur Kaki Jack-up yang Mengalami Retak dengan Pendekatan Ultimate Strength; Studi Kasus Jack-up Maleo MOPU (Mobile Offshore Production Unit

    Directory of Open Access Journals (Sweden)

    Alit Winiscoyo

    2013-03-01

    Full Text Available Jack-up adalah suatu struktur bangunan lepas pantai yang terdiri dari lambung (hull, kaki (legs, dan suatu sistem jacking sehingga memungkinkan untuk dipindahkan dari satu lokasi ke lokasi yang lain. Pada penelitian ini akan dilakukan studi kasus struktur Maleo MOPU (Mobile Offshore Production Unit yang dioperasikan oleh SANTOS (Madura Pty.Ltd. yang beroperasi di Selat Madura blok Maleo dengan kedalaman perairan di lokasi ini adalah 57 m terhadap MSL (Mean Sea Level. Studi kasus ini dilakukan karena ditemukan indikator retak lelah/damage pada sambungan antara kaki jack-up dan mudmat. Analisis ultimate strength akan dilakukan untuk mengetahui integritas struktur terhadap beban maksimal . Variasi dead load, live load dan environmental load menjadi tahapan penting dalam analisa ini untuk mengetahui tingkat integritas struktur. Dengan pengaruh variasi beban (dead load dan live load terhadap struktur untuk tiap-tiap kasus didapatkan nilai unity check (UC yang dari semua kasus dikategorikan aman karena tidak ada nilai UC yang melebihi 1,3 (API RP 2A WSD. Dari semua analisis yang dilakukan dead load lebih berpengaruh dibandingkan dengan live load. Dari analisis pushover yang telah dilakukan pada jack-up Maleo MOPU yang dimitigasi dengan menambahkan brace dan menambahkan ketebalan dihasilkan nilai Reserve Strength Ratio (RSR terkecil pada arah pembebanan 2700 dengan nilai 6,5 pada Brace Clamp case dan terbesar dengan nilai 18,3 pada X-Bracing case. Nilai RSR tersebut masih memenuhi syarat yang telah ditetapkan API RP 2A berupa nilai RSR minimal untuk platform berpenghuni adalah 1,6.  

  1. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  2. B Plant process piping replacement feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  3. 用“笑”支持慈善CONVERSE JACK PURCELL (PRODUCT) RED X

    Institute of Scientific and Technical Information of China (English)

    淡茶清香

    2007-01-01

    JACK PURCELL鞋款来自20世纪活跃于加拿大羽毛球坛的世界冠军Jack Purcell,因为羽毛球、网球和壁球等运动中穿着的运动鞋,需要具备相应的耐用度和舒适度。Jack Purcell开始了对球鞋的研究与改良,并参与了JACK PURCELL的研制策划,为了纪念其贡献,最终这款运动鞋以他的名字命名。身为CONVERSE经典帆布鞋款之一,JACK PURCELL因其鞋头特殊的Smile曲线设计而享有盛名。喜欢它的朋友都会亲切的昵称它为“开口笑”。

  4. Efficient methods of piping cleaning

    OpenAIRE

    Orlov Vladimir Aleksandrovich; Nechitaeva Valentina Anatol'evna; Bogomolova Irina Olegovna; Shaykhetdinova Yuliya Aleksandrovna; Daminova Yuliya Farikhovna

    2014-01-01

    The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of d...

  5. Corrosion behavior in heat pipe

    Directory of Open Access Journals (Sweden)

    Anurak Rodbumrung

    2016-01-01

    Full Text Available The aim of this study was to perform life testing and determine the effect of working fluid on the corrosion of a heat pipe with a sintered wick. The heat pipe was made from a copper tube. The inner heat pipe was filled with 99.97% pure copper powder as a dendritic for the sintering process. The heat pipe had an outer diameter of 6 mm with a length of 200 mm, and distilled water and ethanol were the working fluids. The operating temperature at the evaporator was 125°C. The analysis consisted of using a scanning electron microscope, energy dispersive X-ray spectrometry and atomic absorption spectroscopy. The results of the scanning electron microscope and energy dispersive X-ray spectrometry analysis showed that the corrosion of the heat pipe was uniform. The result of the atomic absorption spectroscopy indicated that the concentration of the copper in the ethanol as the working fluid was greater than in the distilled water as the working fluid, and the highest concentration of copper particles in the ethanol was 22.7499 ppm or 0.0409 mg after testing for 3000 h. The concentration of copper was higher when the length of the life test increased due to corrosion of the heat pipe.

  6. Heat pipe turbine vane cooling

    Energy Technology Data Exchange (ETDEWEB)

    Langston, L.; Faghri, A. [Univ. of Connecticut, Storrs, CT (United States)

    1995-10-01

    The applicability of using heat pipe principles to cool gas turbine vanes is addressed in this beginning program. This innovative concept involves fitting out the vane interior as a heat pipe and extending the vane into an adjacent heat sink, thus transferring the vane incident heat transfer through the heat pipe to heat sink. This design provides an extremely high heat transfer rate and an uniform temperature along the vane due to the internal change of phase of the heat pipe working fluid. Furthermore, this technology can also eliminate hot spots at the vane leading and trailing edges and increase the vane life by preventing thermal fatigue cracking. There is also the possibility of requiring no bleed air from the compressor, and therefore eliminating engine performance losses resulting from the diversion of compressor discharge air. Significant improvement in gas turbine performance can be achieved by using heat pipe technology in place of conventional air cooled vanes. A detailed numerical analysis of a heat pipe vane will be made and an experimental model will be designed in the first year of this new program.

  7. Impacts of fiber orientation and milling on observed crystallinity in jack pine

    Science.gov (United States)

    Umesh P. Agarwal; Sally A. Ralph; Richard S. Reiner; Roderquita K. Moore; Carlos Baez

    2014-01-01

    Influences of fiber orientation and milling on wood cellulose crystallinity were studied using jack pine wood. The fiber orientation effects were measured by sampling rectangular wood blocks in radial, tangential, and cross-sectional orientations. The influence of milling was studied by analyzing the unsieved and sieved milled wood fractions (all

  8. Uus valem otsustamiseks: 10-10-10 / Jack Welch, Suzy Welch

    Index Scriptorium Estoniae

    Welch, Jack

    2009-01-01

    Juhtimisspetsialistid Jack ja Suzy Welch tutvustavad enda loodud valemit 10-10-10, mis on elu juhtimise tööriist aitamaks langetada raskeid otsuseid, hinnates nende mõju 10 minuti, 10 kuu ja 10 aasta pärast

  9. Jack Mezirow's Conceptualisation of Adult Transformative Learning: A Review

    Science.gov (United States)

    Calleja, Colin

    2014-01-01

    This paper traces the evolution of Jack Mezirow's transformative learning theory and its conceptualisation. It discusses the three major influences, namely Thomas Khun's philosophical conception of paradigm, Freire's conception of conscientisation and consciousness growth, and Habermas' domains of learning and the discussion of…

  10. The House That Jack Built: Neoliberalism, Teaching in Higher Education and the Moral Objections

    Science.gov (United States)

    Ingleby, Ewan

    2015-01-01

    The cumulative tale "the house that Jack built" is used as an analogy for flawed theories. This paper considers how the marketisation of higher education in neoliberal countries like England is affecting teaching and learning in Higher Education Institutions. Neoliberal policy approaches resulting in the marketisation of higher education…

  11. 3-D habitat suitability of jack mackerel Trachurus murphyi in the Southeastern Pacific, a comprehensive study

    NARCIS (Netherlands)

    Bertrand, A.; Habasque, J.; Hattab, Tarek; Hintzen, N.T.; Ricardo, Oliveros Ramos; Gutierrez, M.; Demarcq, Herve; Gerlotto, F.

    2016-01-01

    South Pacific jack mackerel, Trachurus murphyi, has an ocean-scale distribution, from the South American coastline to New Zealand and Tasmania. This fish, captured by Humans since the Holocene, is nowadays heavily exploited and its population has decreased substantially since the mid-1990s. The unce

  12. Oregon spotted frog (Rana pretiosa) monitoring at Jack Creek 2015-2016

    Science.gov (United States)

    Adams, Michael J.; Pearl, Christopher A.; Mccreary, Brome; Galvan, Stephanie; Rowe, Jennifer

    2017-01-01

    This dataset contains information from mark-recapture and egg mass surveys conducted 2015-2016 by USGS as part of an ongoing Oregon spotted frog (Rana pretiosa) monitoring effort at Jack Creek, Klamath County, Oregon. Data consist of spotted frog counts aggregated by date, location, life stage, and sex, as well as data on environmental conditions at the time each survey.

  13. Cadmium accumulation by jack-bean and sorghum in hydroponic culture.

    Science.gov (United States)

    Francato Zancheta, Ariana Carramaschi; De Abreu, Cleide Aparecida; Zambrosi, Fernando César Bachiega; de Magalhães Erismann, Norma; Andrade Lagôa, Ana Maria Magalhães

    2015-01-01

    Among the technologies used to recuperate cadmium (Cd) contaminated soils, phytoextraction are particularly important, where the selection of suitable plants is critical to the success of the soil remediation. Thus, the objectives of this study were to evaluate the responses of jack-bean and sorghum to Cd supply and to quantify Cd accumulation by these species grown in hydroponic culture. The plants were subjected to 0, 15, 30, or 60 μmol Cd L(-1) in the nutrient solution, and gas exchange, plant growth and Cd accumulation were measured at 25 days after starting Cd treatments. The Cd supply severely reduced growth of shoots and roots in both species. In jack-bean, Cd decreased photosynthesis by 56-86%, stomatal conductance by 59-85% and transpiration by 48-80%. The concentrations and amounts of Cd accumulated in the plant tissues were proportional to the metal supply in the nutrient solution. Sorghum was more tolerant than jack-bean to Cd toxicity, but the latter showed a greater metal concentration and accumulation in the shoot. Therefore, jack-bean would be more suitable than sorghum for use in Cd phytoremediation programs based on phytoextraction.

  14. Uus valem otsustamiseks: 10-10-10 / Jack Welch, Suzy Welch

    Index Scriptorium Estoniae

    Welch, Jack

    2009-01-01

    Juhtimisspetsialistid Jack ja Suzy Welch tutvustavad enda loodud valemit 10-10-10, mis on elu juhtimise tööriist aitamaks langetada raskeid otsuseid, hinnates nende mõju 10 minuti, 10 kuu ja 10 aasta pärast

  15. "Delays and Vexation": Jack London and the Russo-Japanese War.

    Science.gov (United States)

    Sweeney, Michael S.

    1998-01-01

    Contributes to scholarship on journalism history and censorship by discussing Jack London's efforts as a war correspondent to cover the Russo-Japanese War in Korea and Manchuria in 1904. Focuses on the difficulties he encountered as a result of systematic and highly restrictive censorship by the Japanese. (SR)

  16. Antinociceptive and bioactivity of leaves of Murraya paniculata (L.) Jack, Rutaceae

    OpenAIRE

    Shazid Md. Sharker; Israt Jahan Shahid; Md. Hasanuzzaman

    2009-01-01

    The results of antinociceptive and toxicological studies on the ethanol extract of the leaves of Murraya paniculata (L.) Jack, Rutaceae, are reported. The extract (250 and 500 mg/kg dosages) was found to produce a profound antinociceptive activity in a dose dependent manner. The extract showed considerable brine shrimp toxicity (LD50 = 32 μg/mL).

  17. Preservation of blue-jack mackerel (Trachurus picturatus Bowdich) silage by chemical and fermentative acidification

    NARCIS (Netherlands)

    Enes Dapkevicius, M.L.N.; Nout, M.J.R.; Rombouts, F.M.; Houben, J.H.

    2007-01-01

    We compared acidified and lactic acid fermented silage approaches for the preservation of blue-jack mackerel. Silages acidified with formic and propionic acids had stable pH (3.8) and low (19 mg/g N) levels of volatile nitrogen compounds (total volatile basic nitrogen, TVBN), but relatively high (82

  18. Antinociceptive and bioactivity of leaves of Murraya paniculata (L. Jack, Rutaceae

    Directory of Open Access Journals (Sweden)

    Shazid Md. Sharker

    2009-09-01

    Full Text Available The results of antinociceptive and toxicological studies on the ethanol extract of the leaves of Murraya paniculata (L. Jack, Rutaceae, are reported. The extract (250 and 500 mg/kg dosages was found to produce a profound antinociceptive activity in a dose dependent manner. The extract showed considerable brine shrimp toxicity (LD50 = 32 μg/mL.

  19. development of u-channel screw jack for vegetable oil extraction

    African Journals Online (AJOL)

    HOD

    A U-channel screw jack for extracting vegetable oil was developed through design (with Solid works–Computer Aided. Design (CAD)) and ... content) and supercritical fluid extraction which is very expensive to ..... a e ar Reducer ” [J] Coal Mine.

  20. Take a Walk on the Wild Side, with Folk Artist Jack Barker.

    Science.gov (United States)

    Delacruz, Elizabeth Manley

    1999-01-01

    Discusses the life and artwork of Jack Barker who became a folk artist after running a local gas station in Essex, Illinois. Explains that art educators view student interactions with folk artists like Barker as valuable because these artists embody a creative spirit and a thirst for knowledge about materials and processes. (CMK)

  1. Habitat Preferences, Distribution Pattern, and Root Weight Estimation of Pasak Bumi (Eurycoma longifolia Jack.

    Directory of Open Access Journals (Sweden)

    Siti Masitoh Kartikawati

    2014-04-01

    Full Text Available Pasak bumi (Eurycoma longifolia Jack is one of non timber forest products with “indeterminate” conservation status and commercially traded in West Kalimantan. The research objective was to determine the potential of pasak bumi root per hectare and its ecological condition under natural habitat. Root weight of E. longifolia Jack was estimated using simple linear regression and exponential equation with stem diameter and height as independent variables. The results showed that the individual number of the population was 114 with the majority in seedling stage with 71 individuals (62.28%. The distribution was found in clumped pattern. Conditions of the habitat could be described as follows: daily average temperature of 25.6oC, daily average relative humidity of 73.6%, light intensity of 0.9 klx, and red-yellow podsolic soil with texture ranged from clay to sandy clay. The selected estimator model for E. longifolia Jack root weight used exponential equation with stem height as independent variable using the equation of Y= 21.99T0,010 and determination coefficient of 0.97. After height variable was added, the potential of E. longifolia Jack minimum root weight that could be harvested per hectare was 0.33 kg.

  2. Pandemic Fear and Literature: Observations from Jack London’s The Scarlet Plague

    Centers for Disease Control (CDC) Podcasts

    2014-11-18

    Sarah Gregory reads an abridged version of the essay, Pandemic Fear and Literature: Observations from Jack London’s The Scarlet Plague.  Created: 11/18/2014 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 11/20/2014.

  3. Jack Mezirow's Conceptualisation of Adult Transformative Learning: A Review

    Science.gov (United States)

    Calleja, Colin

    2014-01-01

    This paper traces the evolution of Jack Mezirow's transformative learning theory and its conceptualisation. It discusses the three major influences, namely Thomas Khun's philosophical conception of paradigm, Freire's conception of conscientisation and consciousness growth, and Habermas' domains of learning and the discussion of…

  4. Habitat Preferences, Distribution Pattern, and Root Weight Estimation of Pasak Bumi (Eurycoma longifolia Jack.

    Directory of Open Access Journals (Sweden)

    Siti Masitoh Kartikawati

    2014-04-01

    Full Text Available Pasak bumi (Eurycoma longifolia Jack is one of non timber forest products with “indeterminate” conservation status and commercially traded in West Kalimantan. The research objective was to determine the potential of pasak bumi root per hectare and its ecological condition under natural habitat. Root weight of E. longifolia Jack was estimated using simple linear regression and exponential equation with stem diameter and height as independent variables. The results showed that the individual number of the population was 114 with the majority in seedling stage with 71 individuals (62.28%. The distribution was found in clumped pattern. Conditions of the habitat could be described as follows: daily average temperature of 25.6oC, daily average relative humidity of 73.6%, light intensity of 0.9 klx, and red-yellow podsolic soil with texture ranged from clay to sandy clay. The selected estimator model for E. longifolia Jack root weight used exponential equation with stem height as independent variable using the equation of Y= 21.99T0,010 and determination coefficient of 0.97. After height variable was added, the potential of E. longifolia Jack minimum root weight that could be harvested per hectare was 0.33 kg.Keywords: Eurycoma longifolia, habitat preference, distribution pattern, root weight

  5. Jacks-of-all-trades? The effect of balanced skills on team performance

    NARCIS (Netherlands)

    Rosendahl Huber, L.; Sloof, R.; van Praag, M.

    2014-01-01

    Previous empirical studies have shown that solo entrepreneurs benefit from having balanced skills: Jacks-of-All-Trades (JATs) are better entrepreneurs than specialists are. Nowadays however, the majority of entrepreneurs start up and run ventures together in teams. In this paper we test whether the

  6. Flat heat pipe design, construction, and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Voegler, G.; Boughey, B.; Cerza, M.; Lindler, K.W.

    1999-08-02

    This paper details the design, construction and partial analysis of a low temperature flat heat pipe in order to determine the feasibility of implementing flat heat pipes into thermophotovoltaic (TPV) energy conversion systems.

  7. 46 CFR 61.15-5 - Steam piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam piping. 61.15-5 Section 61.15-5 Shipping COAST... Periodic Tests of Piping Systems § 61.15-5 Steam piping. (a) Main steam piping shall be subjected to a.... If the covering of the piping is not removed, the test pressure shall be maintained on the piping...

  8. 49 CFR Appendix B to Part 192 - Qualification of Pipe

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Qualification of Pipe B Appendix B to Part 192... Pipe I. Listed Pipe Specifications API 5L—Steel pipe, “API Specification for Line Pipe” (incorporated by reference, see § 192.7). ASTM A53/A53M—Steel pipe, “Standard Specification for Pipe, Steel Black...

  9. Introduction to Loop Heat Pipes

    Science.gov (United States)

    Ku, Jentung

    2015-01-01

    This is the presentation file for the short course Introduction to Loop Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. This course will discuss operating principles and performance characteristics of a loop heat pipe. Topics include: 1) pressure profiles in the loop; 2) loop operating temperature; 3) operating temperature control; 4) loop startup; 4) loop shutdown; 5) loop transient behaviors; 6) sizing of loop components and determination of fluid inventory; 7) analytical modeling; 8) examples of flight applications; and 9) recent LHP developments.

  10. 46 CFR 169.652 - Bilge piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bilge piping. 169.652 Section 169.652 Shipping COAST... Electrical Bilge Systems § 169.652 Bilge piping. (a) All vessels of 26 feet in length and over must be... than 120 feet in length the bilge pipe must be not less than one and one-half inches. Piping on...

  11. China Steel Pipes Demand Rising Steadily

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Steel pipes industry is an industry to play a decisive role in the national economic development. During the Tenth Five-Year Plan period, the steel pipes output has been increased distinctly. Based on experts forecast,the steel pipes demand in China will still be in tendency of increase during the Eleventh FiveYear Plan period, which will doubtlessly bring new opportunity and challenge to the steel pipes enterprises in China.

  12. 46 CFR 76.15-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.15-15 Section 76.15-15 Shipping COAST GUARD... Extinguishing Systems, Details § 76.15-15 Piping. (a) The piping, valves, and fittings shall have a bursting pressure of not less than 6,000 p.s.i. (b) All piping, in nominal sizes not over 3/4 inch, shall be...

  13. Assessment of the integrity of welded pipes

    OpenAIRE

    Šarkoćević, Živče; Arsić, Miodrag; Sedmak, Aleksandar; MEĐO, Bojan; Mišić, Milan; id_orcid 0000-0003-0550-1851

    2014-01-01

    The subject of the paper is analysis of the integrity of welded pipes made of API J55 steel by high frequency contact welding (HF). Experimental research on the mechanical properties of the base material was conducted on pipes withdrawn from exploatation after 70 000 hours at service. Defect influence of the surface crack on the integrity of pipes was tested using hydrostatic pressure of pipes with axial surface crack in the base material. Fracture behaviour was tested using modified compact ...

  14. BIMORPH PIEZOELECTRIC ACTUATOR FOR SMALL PIPE ROBOT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An experimental bimorph piezoelectric element (PZT) actuator for small pipe robot is developed. The robotcan move in φ 20 mm pipe, and can carry a CCD camera for detecting cracks or fine holes on inner surface of pipe. Thevelocity of the robot can reach 17~22 mm/s for vertical pipe up/down, respectively. Moving principle and its perfor-mance characteristics are presented.

  15. Analysis of Municipal Pipe Network Franchise Institution

    Science.gov (United States)

    Yong, Sun; Haichuan, Tian; Feng, Xu; Huixia, Zhou

    Franchise institution of municipal pipe network has some particularity due to the characteristic of itself. According to the exposition of Chinese municipal pipe network industry franchise institution, the article investigates the necessity of implementing municipal pipe network franchise institution in China, the role of government in the process and so on. And this offers support for the successful implementation of municipal pipe network franchise institution in China.

  16. Smoking water pipe is injurious to lungs

    DEFF Research Database (Denmark)

    Sivapalan, Pradeesh; Ringbæk, Thomas; Lange, Peter

    2014-01-01

    This review describes the pulmonary consequences of water pipe smoking. Smoking water pipe affects the lung function negatively, is significantly associated with chronic obstructive pulmonary disease and increases the risk of lung infections. Case reports suggest that regular smokers of water pipe...

  17. 46 CFR 108.449 - Piping tests.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping tests. 108.449 Section 108.449 Shipping COAST... Fire Extinguishing Systems Fixed Carbon Dioxide Fire Extinguishing Systems § 108.449 Piping tests. (a... piping installation. (b) When tested with CO2 or other inert gas under a pressure of 70 kilograms...

  18. 14 CFR 29.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 29.1123 Section 29.1123... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Exhaust System § 29.1123 Exhaust piping. (a) Exhaust piping must be heat and corrosion resistant, and must have provisions to prevent failure due to...

  19. 46 CFR 76.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Piping. 76.10-15 Section 76.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 76.10-15 Piping. (a) All piping, valves, and fittings shall meet the applicable requirements...

  20. 49 CFR 195.128 - Station piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Station piping. 195.128 Section 195.128 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... PIPELINE Design Requirements § 195.128 Station piping. Any pipe to be installed in a station that...

  1. 46 CFR 193.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping. 193.10-15 Section 193.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 193.10-15 Piping. (a) All piping, valves, and fittings, shall meet...

  2. 46 CFR 95.10-15 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 95.10-15 Section 95.10-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS FIRE PROTECTION EQUIPMENT Fire Main System, Details § 95.10-15 Piping. (a) All piping, valves, and fittings shall meet the...

  3. 14 CFR 25.1123 - Exhaust piping.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Exhaust piping. 25.1123 Section 25.1123... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Exhaust System § 25.1123 Exhaust piping. For powerplant and auxiliary power unit installations, the following apply: (a) Exhaust piping must be heat...

  4. 46 CFR 132.110 - Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping. 132.110 Section 132.110 Shipping COAST GUARD....110 Piping. (a) Except as provided for liftboats by § 134.180 of this subchapter, each fitting, flange, valve, and run of piping must meet the applicable requirements of part 128 of this subchapter....

  5. Thermodynamic aspects of heat pipe operation

    Science.gov (United States)

    Richter, Robert; Gottschlich, Joseph

    1990-01-01

    An expanded heat pipe operating model is described which includes thermodynamic and heat transfer considerations to reconcile disparities between actual and theoretical heat pipe performances. The analysis shows that thermodynamic considerations can explain the observed heat pipe performance limitations. A full understanding of thermodynamic processes could lead to advanced concepts for thermal transport devices.

  6. 46 CFR 154.660 - Pipe welding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Pipe welding. 154.660 Section 154.660 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR... § 154.660 Pipe welding. (a) Pipe welding must meet Part 57 of this chapter. (b) Longitudinal butt...

  7. 49 CFR 192.59 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.59 Section 192.59 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.59 Plastic pipe. (a) New plastic pipe... specification; and (2) It is resistant to chemicals with which contact may be anticipated. (b) Used plastic...

  8. 49 CFR 236.712 - Brake pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Brake pipe. 236.712 Section 236.712 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.712 Brake pipe. A pipe...

  9. 46 CFR 76.25-30 - Piping.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS FIRE PROTECTION EQUIPMENT Automatic Sprinkling System, Details § 76.25-30 Piping. (a) All piping, valves, and fittings of ferrous materials shall be... piping, valves, fittings, and sprinkler heads shall be securely supported, and, where...

  10. 33 CFR 127.1101 - Piping systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Piping systems. 127.1101 Section... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1101 Piping systems. Each piping system within the marine transfer area for LHG used for the transfer of LHG must meet the...

  11. 46 CFR 56.10-5 - Pipe.

    Science.gov (United States)

    2010-10-01

    ...) Ferrous pipe. ASTM Specification A 53 (incorporated by reference, see § 56.01-2) furnace welded pipe shall... found from Table 56.60-1(a). (3) Copper-nickel alloys may be used for water and steam service within the... specifically permitted by this part. (6) Aluminum-alloy pipe or tube along with similar junction equipment may...

  12. The Attraction of Schiehallion as Presented in a Lecture by Jack Brydone to a Fredericton Audience in 1856

    Science.gov (United States)

    Kennedy, J. E.

    1986-08-01

    The role of William Brydone Jack as a 19th-century interpreter of science is examined using the classical experiment of Nevil Maskelyne at Schiehallion as the background event and the basis for the development of this analysis.

  13. Eesti saab 2018. aasta Londoni raamatumessil erilise tähelepanu osaliseks / Jacks Thomas ; intervjueerinud Priit Hõbemägi

    Index Scriptorium Estoniae

    Thomas, Jacks

    2017-01-01

    Intervjuu Euroopa ühe suurima, Londoni raamatumessi direktori Jacks Thomasiga, kes külastas Tallinna, et teha ettevalmistusi järgmiseks aastaks, kui Eesti koos teiste Baltimaadega on messi peakülaline

  14. EAARL-B Topography-Big Thicket National Preserve: Neches Bottom and Jack Gore Baygall Unit, Texas, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A first-surface topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Gore Baygall Unit of Big Thicket National Preserve in Texas, was...

  15. EAARL-B Topography-Big Thicket National Preserve: Neches Bottom and Jack Gore Baygall Unit, Texas, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A bare-earth topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Gore Baygall Unit of Big Thicket National Preserve in Texas, was produced...

  16. EAARL-B Topography-Big Thicket National Preserve: Neches Bottom and Jack Gore Baygall Unit, Texas, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A bare-earth topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Gore Baygall Unit of Big Thicket National Preserve in Texas, was produced...

  17. Historical wildlife dynamics on Dugway Proving Ground: population and disease trends in jack rabbits over two decades. [Lepus californicus

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, L.E.; Van Voris, P.

    1986-08-01

    In an effort to determine whether US Army activities on the Dugway Proving Ground (DPG) have had an impact on resident wildlife, intensive studies have been conducted on the biology and ecology of the black-tailed jack rabbit (Lepus californicus) since 1965. in addition, the incidence of endemic diseases in several species of resident wildlife on the DPG have been studied from the late 1950s through the mid-1970s. The objectives of this report are to: (1) compile and summarize the jack rabbit data and some of the disease information that is presently contained only in annual reports; (2) compare the DPG jack rabbit data to data available on other jack rabbit populations; and (3) analyze the data for unusual or unexplained fluctuations in population densities or in incidence of disease.

  18. EAARL-B Topography-Big Thicket National Preserve: Neches Bottom and Jack Gore Baygall Unit, Texas, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A first-surface topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Gore Baygall Unit of Big Thicket National Preserve in Texas, was...

  19. PPOOLEX experiments with two parallel blowdown pipes

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-01-15

    This report summarizes the results of the experiments with two transparent blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through either one or two vertical transparent blowdown pipes to the condensation pool. Five experiments with one pipe and six with two parallel pipes were carried out. The main purpose of the experiments was to study loads caused by chugging (rapid condensation) while steam is discharged into the condensation pool filled with sub-cooled water. The PPOOLEX test facility is a closed stainless steel vessel divided into two compartments, dry well and wet well. In the experiments the initial temperature of the condensation pool water varied from 12 deg. C to 55 deg. C, the steam flow rate from 40 g/s to 1 300 g/s and the temperature of incoming steam from 120 deg. C to 185 deg. C. In the experiments with only one transparent blowdown pipe chugging phenomenon didn't occur as intensified as in the preceding experiments carried out with a DN200 stainless steel pipe. With the steel blowdown pipe even 10 times higher pressure pulses were registered inside the pipe. Meanwhile, loads registered in the pool didn't indicate significant differences between the steel and polycarbonate pipe experiments. In the experiments with two transparent blowdown pipes, the steamwater interface moved almost synchronously up and down inside both pipes. Chugging was stronger than in the one pipe experiments and even two times higher loads were measured inside the pipes. The loads at the blowdown pipe outlet were approximately the same as in the one pipe cases. Other registered loads around the pool were about 50-100 % higher than with one pipe. The experiments with two parallel blowdown pipes gave contradictory results compared to the earlier studies dealing with chugging loads in case of multiple pipes. Contributing

  20. FUNCTIONAL REQUIREMENTS FOR STABILITY OF JACK UP DRILLING RIGS ON WORKING POSITION

    Directory of Open Access Journals (Sweden)

    Damir Zadravec

    2008-12-01

    Full Text Available Jack up drilling platforms are offshore drilling units composed by drilling rig situated on naval structure without self propelling device. Jack up drilling rigs are units used for drilling and completion of deep well bores in offshore oil and gas exploration industry or field development. By reaching the theoretical center of gravity and equilibrium while towing and balance of acting forces on the unit while operations on location ensures the stability and safe mode of operations of entire unit. Penetration of legs spud cans in sea bad produced by weight of unit and acting of preload force, depending on geotechnical characteristics, type and bearing capacity of sea bad, and taking in consideration working environmental forces which acts on unit (wind, waves, sea current, ice, snow ensures proper foundation, environmental forces balancing and safe mode of operations (the paper is published in Croatian.

  1. Extreme Response Predictions for Jack-up Units in Second Order Stochastic Waves by FORM

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Capul, Julien

    2006-01-01

    An efficient procedure for derivation of mean outcrossing rates for non-linear wave-induced responses in stationary sea states is presented and applied to an analysis of the horizontal deck sway of a jack-up unit. The procedure is based on the theory of random vibrations and uses the first order...... reliability method (FORM) to estimate the most probable set of wave components in the ocean wave system that will lead to exceedance of a specific response level together with the associated mean outcrossing rate. The procedure bears some resemblance to the Constrained NewWave methodology, but is conceptually......-tic waves, not previously included in the analysis of jack-up units in stochastic seaways....

  2. JackIn Head: Immersive Visual Telepresence System with Omnidirectional Wearable Camera.

    Science.gov (United States)

    Kasahara, Shunichi; Nagai, Shohei; Rekimoto, Jun

    2017-03-01

    Sharing one's own immersive experience over the Internet is one of the ultimate goals of telepresence technology. In this paper, we present JackIn Head, a visual telepresence system featuring an omnidirectional wearable camera with image motion stabilization. Spherical omnidirectional video footage taken around the head of a local user is stabilized and then broadcast to others, allowing remote users to explore the immersive visual environment independently of the local user's head direction. We describe the system design of JackIn Head and report the evaluation results of real-time image stabilization and alleviation of cybersickness. Then, through an exploratory observation study, we investigate how individuals can remotely interact, communicate with, and assist each other with our system. We report our observation and analysis of inter-personal communication, demonstrating the effectiveness of our system in augmenting remote collaboration.

  3. Discussion on Key Points of Wind Load of Jack-up Unit

    Institute of Scientific and Technical Information of China (English)

    林一; 胡安康; 熊飞; 蒋玮

    2014-01-01

    The anti-overturning ability and structure safety of jack-up unit in in-place condition are often affected by environment loads, especially wind load. According to the MODU rule, the projected area method is used for calculating the wind load. However, the calculated results are conservative and not good for structure optimization design. In this paper, a 400 ft jack-up is studied as an example. Based on the wind tunnel test and numerical simulation method, some key points of wind load calculation, such as shielding effect, lift effect and shape coefficient of component, are discussed. The study shows that the points mentioned above, which are ignored in the MODU rule calculation, result in the conservative result.

  4. Analysis of the Reasons for Jack London ’s Disillusion

    Institute of Scientific and Technical Information of China (English)

    秦宏莉; 张玲

    2015-01-01

    Jack London is an outstanding realistic writer in the American modern times, creating 19 novels and 125 short stories. He came from a poor working class family. Through his hard work, he finally became a world famous writer. However ,he ended up with suicide of his 40-year-old life after his success. Jack betrayed his success in the way of death. This outcome is not only the end of life, but is also a negative to the empty life. What on earth is the meaning of life? This paper analyzes the reasons for Jack’s disillusion from the aspects of his family background, the era he lived, his experience, his education, his works and his outlook on life.

  5. Reliability of fixed and jack-up structures: a comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Morandi, A.C.; Frieze, P.A. [MSL Engineering, Sunninghill, Ascot (United Kingdom); Birkinshaw, M. [Health and Safety Executive, London (United Kingdom); Smith, D.; Dixon, A.T. [Health and Safety Executive, Bootle (United Kingdom)

    1997-12-31

    This paper presents results of a comparison between the structural reliability of a jacket designed to the limit of API RP 2A-LRFD and of a jack-up designed to the limit of the SNAME T and R Bulletin 5-5A. Both platforms were assumed as operating in the same location and at the same water depth when evaluating metocean and geotechnical data. Component strength was evaluated on the basis of the latest ISO formulations and system strength was evaluated by pushover analysis using CAP/SeaStar. Reliability was evaluated using the Response Surface method. It was found that, for both platforms, failure probability at system level was about an order of magnitude smaller than at component level. The jack-up critical failure probabilities tended to be about an order of magnitude greater than the corresponding jacket results. (Author)

  6. Aphrodisiac evaluation in non-copulator male rats after chronic administration of Eurycoma longifolia Jack.

    Science.gov (United States)

    Ang, H H; Ngai, T H

    2001-08-01

    The aphrodisiac effect of Eurycoma longifolia Jack (0.5 g/kg) was evaluated in noncopulator male rats using an electrical cage. Fractions of E. longifolia Jack decreased the hesitation time of noncopulator male rats, throughout the investigation period. Furthermore, it possessed a transient increase in the percentage of the male rats responding to the right choice, more than 50% of the male rats scored "right choice" after 3 weeks post-treatment and the effect became more prominent after 8 weeks post-treatment (only 40-50% of the control male rats responded to the right choice) using the electrical copulation cage. Hence, this study lends further support to the use of the plant by indigenous populations as a traditional medicine for its aphrodisiac property.

  7. Radical Rebel or Conservative Apologist: An Analysis of the Divided Mind of Jack Kerouac

    OpenAIRE

    Kvisvik, Marianne

    2006-01-01

    This thesis is an analysis of Jack Kerouac s novels On the Road, The Subterraneans, and The Dharma Bums. The angle is Kerouac s ambiguity and his supposed influence on the countercultural movements of the sixties. Themes discussed are among others conformism, spirituality and religion, racial attitudes and sexual behaviours in Kerouac s novels, juxtaposed to the general attitudes of white middle-class society of his time.

  8. Variable amplitude corrosion fatigue and fracture mechanics of weldable high strength jack-up steels

    OpenAIRE

    Etube, L. S.

    1998-01-01

    The tubular welded joints used in the construction of Offshore structures can experience millions of variable amplitude wave induced stress cycles during their operational life. Fatigue has been identified as the main cause of degradation of structural integrity in these structures. As a result, fatigue is an important consideration in their design. Jack-up legs are made from a range of high strength steels with yield strengths up to 70OMPa. These steels are thought to exhib...

  9. A kinetic study of jack-bean urease denaturation by a new dithiocarbamate bismuth compound

    Science.gov (United States)

    Menezes, D. C.; Borges, E.; Torres, M. F.; Braga, J. P.

    2012-10-01

    A kinetic study concerning enzymatic inhibitory effect of a new bismuth dithiocarbamate complex on jack-bean urease is reported. A neural network approach is used to solve the ill-posed inverse problem arising from numerical treatment of the subject. A reaction mechanism for the urease denaturation process is proposed and the rate constants, relaxation time constants, equilibrium constants, activation Gibbs free energies for each reaction step and Gibbs free energies for the transition species are determined.

  10. Radical Rebel or Conservative Apologist: An Analysis of the Divided Mind of Jack Kerouac

    OpenAIRE

    2006-01-01

    This thesis is an analysis of Jack Kerouac s novels On the Road, The Subterraneans, and The Dharma Bums. The angle is Kerouac s ambiguity and his supposed influence on the countercultural movements of the sixties. Themes discussed are among others conformism, spirituality and religion, racial attitudes and sexual behaviours in Kerouac s novels, juxtaposed to the general attitudes of white middle-class society of his time.

  11. Technology in the work of Jack Kerouac and William S. Burroughs

    OpenAIRE

    2008-01-01

    This thesis explores the use and significance of technologies of representation in the work of Jack Kerouac (1922-1969) and William S. Burroughs (1914-1997), particularly in relation to the development of ideas of free and improvisatory expression in the 1950s. More specifically it focuses on the role played by the technologies of the typewriter and tape recorder in the textual production of key works of each writer and how these technologies are also thematically important in their explorat...

  12. Immune-mediated thrombocytopenia associated with angiostrongylus vasorum infection in a Jack Russell terrier

    OpenAIRE

    JO'Neill Emma; Acke Els; Tobin Emma; McCarthy Grainne

    2010-01-01

    Abstract A twenty-month-old Jack Russell terrier was presented with a four-day history of thrombocytopenia, echymotic inguinal haemorrhages, coughing and reduced exercise tolerance. Clinical examination revealed several petechial haemorrhages on the gingivae and small echymotic haemorrhages in the inguinal region, along with mild bilateral epistaxis. Haematology confirmed a platelet count of 1.0 × 10/L. Thoracic radiographs revealed a wide-spread mixed alveolar-interstitial lung pattern, appa...

  13. Rereading "The Jack-Roller:" Hidden Histories in Sociology and Social Work

    Science.gov (United States)

    Shaw, Ian

    2009-01-01

    I revisit one of the iconic Chicago School studies, Clifford Shaw's "The Jack-Roller". A naive reading of Shaw's book leaves the reader with a sense of having been inducted into a melange of what we now know as "sociology" and "social work," but which to Shaw seems a coherent stance. I suggest that this is close to the heart of how things were,…

  14. Jacks-of-All-Trades? The Effect of Balanced Skills on Team Performance

    OpenAIRE

    Rosendahl Huber, Laura; Sloof, Randolph; Van Praag, Mirjam

    2014-01-01

    Previous empirical studies have shown that solo entrepreneurs benefit from having balanced skills: Jacks-of-All-Trades (JATs) are better entrepreneurs than specialists are. Nowadays however, the majority of entrepreneurs start up and run ventures together in teams. In this paper we test whether the effect of more balanced skills is also positive in a team of entrepreneurs. We also explore whether (a lack of) individual balanced skills can be substituted by combining the skills of various spec...

  15. This is not a Pipe

    DEFF Research Database (Denmark)

    Just, Sine Nørholm

    2016-01-01

    or unwilling to listen to, let alone engage with, emotionally guided bottom-up participation. Using an illustrative case of a Danish public debate over an alleged ban on liquorice pipes, this article argues that the disconnect between invitation and participation may be explained by the fact...

  16. Investigation of sand in piping

    Directory of Open Access Journals (Sweden)

    Nađ Laslo

    2012-01-01

    Full Text Available For the investigation of the grain size distribution of the material washed out from the piping, we used 20 samples originating from different places on the Danube and the Tisza rivers. The grading characteristics of these samples were investigated based on selected grain sizes and the uniformity of gradients. Based on the investigations it has become possible to identify which grain size fractions are likely to be washed out, and how to characterize those fractions. Based on the grain size distribution curves it has been made possible to define the boundaries of the zone susceptible to piping. The zone limits of granular soils liquefied by earthquakes and the zone limits of the soil out washed from piping are very similar. This apparent correspondence already formerly raised the hypothetic question of whether piping occurring during high flood can be simulated by shape to similar surface liquefaction phenomena experienced during earthquakes, as in both cases a volcanic cone is formed through the crater of which water is constantly issuing, dragging away solid particles.

  17. Localized turbulence in pipe flow

    NARCIS (Netherlands)

    Kuik, D.J.

    2011-01-01

    In this thesis the transition to turbulence in pipe flow is investigated. At low Reynolds numbers, the flow returns to the laminar state spontaneously. At high Reynolds number a small perturbation causes the flow to suddenly become turbulent. In the intermediate regime localized turbulence is observ

  18. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...

  19. Spinning pipe gas lens revisited

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-01-01

    Full Text Available The graded index (GRIN-like) medium generated by gas inside a heated steel pipe when rotated about its longitudinal axis has the ability to focus a laser beam. While the effective focal length of such a system has previously been studied...

  20. Efficient methods of piping cleaning

    Directory of Open Access Journals (Sweden)

    Orlov Vladimir Aleksandrovich

    2014-01-01

    Full Text Available The article contains the analysis of the efficient methods of piping cleaning of water supply and sanitation systems. Special attention is paid to the ice cleaning method, in course of which biological foil and various mineral and organic deposits are removed due to the ice crust buildup on the inner surface of water supply and drainage pipes. These impurities are responsible for the deterioration of the organoleptic properties of the transported drinking water or narrowing cross-section of drainage pipes. The co-authors emphasize that the use of ice compared to other methods of pipe cleaning has a number of advantages due to the relative simplicity and cheapness of the process, economical efficiency and lack of environmental risk. The equipment for performing ice cleaning is presented, its technological options, terms of cleansing operations, as well as the volumes of disposed pollution per unit length of the water supply and drainage pipelines. It is noted that ice cleaning requires careful planning in the process of cooking ice and in the process of its supply in the pipe. There are specific requirements to its quality. In particular, when you clean drinking water system the ice applied should be hygienically clean and meet sanitary requirements.In pilot projects, in particular, quantitative and qualitative analysis of sediments adsorbed by ice is conducted, as well as temperature and the duration of the process. The degree of pollution of the pipeline was estimated by the volume of the remote sediment on 1 km of pipeline. Cleaning pipelines using ice can be considered one of the methods of trenchless technologies, being a significant alternative to traditional methods of cleaning the pipes. The method can be applied in urban pipeline systems of drinking water supply for the diameters of 100—600 mm, and also to diversion collectors. In the world today 450 km of pipelines are subject to ice cleaning method.Ice cleaning method is simple

  1. Congenital deafness in Jack Russell terriers: prevalence and association with phenotype.

    Science.gov (United States)

    Comito, B; Knowles, K E; Strain, G M

    2012-08-01

    Congenital hereditary sensorineural deafness is the most common form of deafness in dogs. The objectives of this study were to determine a reliable measure of the prevalence of deafness in Jack Russell terriers, an affected breed, and associations between deafness and phenotypic characteristics. Brainstem auditory evoked response recordings and phenotypic parameters (coat color, coat texture, sex, eye color, sire and dam hearing status) were recorded for 1009 Jack Russell terriers. The prevalence of unilateral and bilateral deafness was 3.57% and 0.50%, respectively, lower by a factor of three to four than in earlier reports based on smaller and closely related kindreds. Significant association with deafness was identified with white coat color and parental hearing status, but not with sex or coat type. Lack of significant sex or coat type associations and the significant association with white coat color are consistent with previous reports. In conclusion the prevalence of deafness in Jack Russell terriers is lower than initially reported. Deafness was associated with white coat color and parental hearing status. The association with parental hearing status supports this form of deafness being a heritable trait in the breed and the association with white coat color supports an inheritance linked to pigmentation genes.

  2. Estuaries as Nurseries for the Jacks Caranx ignobilis and Caranx melampygus (Carangidae) in Hawaii

    Science.gov (United States)

    Smith, G. C.; Parrish, J. D.

    2002-09-01

    Estuaries provide juvenile nursery habitat for many species of fish that inhabit marine environments as adults. In Hawaii, some juvenile Caranx ignobilis and Caranx melampygus occupy estuaries opportunistically before moving to nearshore ocean habitats. This study examined the extent and nature of estuarine habitat available in the lower Hanalei River of Kauai, the relative abundance and distribution of jacks in the estuary, and their diets. Salinity measurements indicated that the upstream extent of saltwater ranged from the mouth to nearly 5 km upriver and was strongly influenced by the variable river discharge. Juvenile jacks between 80 and 310 mm FL were observed on underwater transects over the full range of mixohaline conditions. Hand-operated seine collections produced overall catch rates of ∼0·64 fish/haul for each of these species. The two jacks ate much the same spectrum of food items. C. ignobilis was somewhat more piscivorous than C. melampygus, as determined by measures of frequency of predation and number and bulk of prey. Data for length at age, incorporating daily otolith increment counts from these estuarine juveniles and previous counts from non-estuarine specimens, were fitted to a lifetime von Bertalanffy growth model. The results greatly extended the age range of the model and suggested that growth rates were not much different between estuarine and non-estuarine fish.

  3. Jack vertebral dilator kyphoplasty for treatment of osteoporotic vertebral compression fractures.

    Science.gov (United States)

    Li, Dapeng; Huang, Yonghui; Yang, Huilin; Chen, Qi; Sun, Taicun; Wu, Yan; Li, Xuefeng

    2014-01-01

    Osteoporotic vertebral compression fractures (OVCFs) are common in the elderly population and often involve the thoracolumbar vertebrae. Clinical symptoms of OVCFs include severe pain, loss of vertebral height, progressive kyphosis and increased mortality. Jack vertebral dilator kyphoplasty is a recently developed OVCFs treatment modality, with few systematic studies present in the literature. This retrospective study was designed to investigate the safety and efficacy of Jack vertebral dilator kyphoplasty for treating thoracolumbar OVCFs. Sixteen elderly patients (55-85 years) with solitary thoracolumbar OVCFs were treated with this procedure and followed-up (10-27 months). The amount of injected bone cement and operative time, preoperative and postoperative visual analogue scores, anterior and middle vertebral body heights, local kyphosis angle, and complications was analysed. The results showed that the method provided long-term pain relief and restoration of the vertebral body height and spinal alignment. No serious complications occurred, but two patients experienced recompression of the vertebral body, and one patient experienced cement leakage into a disc. In conclusion, Jack vertebral dilator kyphoplasty is a safe and effective minimally invasive procedure for treatment of OVCFs.

  4. Preliminary Design of IHTS Piping Support for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nak-Hyun; Koo, Gyeong-Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A pipe support is a designed element that transfer the load from pipe to the supporting structures. Providing sufficient pipe wall thickness and installing proper supports are most important elements for structural integrity of the piping system. Piping supports are generally referred to as device used in supporting the weight of the piping. The weight includes that of the pipe proper, the content the pipe carries, and the pipe converting, such as insulation. A FE analysis was performed to select variable spring hanger of IHTS hot-leg piping for PGSFR. The calculated values will be used to design variable spring hanger.

  5. Underground pipe inspection device and method

    Science.gov (United States)

    Germata, Daniel Thomas [Wadsworth, IL

    2009-02-24

    A method and apparatus for inspecting the walls of an underground pipe from inside the pipe in which an inspection apparatus having a circular planar platform having a plurality of lever arms having one end pivotably attached to one side of the platform, having a pipe inspection device connected to an opposite end, and having a system for pivoting the lever arms is inserted into the underground pipe, with the inspection apparatus oriented with the planar platform disposed perpendicular to the pipe axis. The plurality of lever arms are pivoted toward the inside wall of the pipe, contacting the inside wall with each inspection device as the apparatus is conveyed along a length of the underground pipe.

  6. MONITORING AND CONTROLLING ON SURFACE SETTLEMENT IN SAND AND GRAVEL STRATA CAUSED BY SUBWAY STATION CONSTRUCTION APPLYING PIPE-ROOF PRE-CONSTRUCTION METHOD (PPM

    Directory of Open Access Journals (Sweden)

    Xian Yang

    2017-07-01

    Full Text Available Pipe-roof Pre-construction Method (PPM is regarded as a safer method to construct underground space, especially suitable for the construction sites with dense surface buildings, underground pipelines and complicated geological conditions. Xinleyizhi Station of Shenyang Metro constructed by PPM. In order to ensure safety in construction, the whole construction process was closely monitored. In this paper, monitoring results of surface settlement in PPM is analyzed. According to the monitoring results, the most serious settlement occurred in pipes jacking, which was the first and the most crucial step in PPM. The settlement reasons in each step are discussed, and controlling methods of surface settlement in each step are elaborated. Through close monitoring and timely control, the construction of Xinleyizhi Station completed smoothly. Because of the obvious advantages of PPM, the method will be used more widely in construction of shallow buried excavation under complicated surrounding and geological conditions.

  7. Determining the effect of different cooking methods on the nutritional composition of salmon (Salmo salar) and chilean jack mackerel (Trachurus murphyi) fillets.

    Science.gov (United States)

    Bastías, José M; Balladares, Pamela; Acuña, Sergio; Quevedo, Roberto; Muñoz, Ociel

    2017-01-01

    The effect of four cooking methods was evaluated for proximate composition, fatty acid, calcium, iron, and zinc content in salmon and Chilean jack mackerel. The moisture content of steamed salmon decreased (64.94%) compared to the control (68.05%); a significant decrease was observed in Chilean jack mackerel in all the treatments when compared to the control (75.37%). Protein content in both salmon and Chilean jack mackerel significantly increased under the different treatments while the most significant decrease in lipids was found in oven cooking and canning for salmon and microwaving for Chilean jack mackerel. Ash concentration in both salmon and Chilean jack mackerel did not reveal any significant differences. Iron and calcium content only had significant changes in steaming while zinc did not undergo any significant changes in the different treatments. Finally, no drastic changes were observed in the fatty acid profile in both salmon and Chilean jack mackerel.

  8. 46 CFR 154.310 - Cargo piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping systems. 154.310 Section 154.310 Shipping... Arrangements § 154.310 Cargo piping systems. Cargo liquid or vapor piping must: (a) Be separated from other piping systems, except where an interconnection to inert gas or purge piping is required by §...

  9. 46 CFR 154.500 - Cargo and process piping standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo and process piping standards. 154.500 Section 154... Equipment Cargo and Process Piping Systems § 154.500 Cargo and process piping standards. The cargo liquid and vapor piping and process piping systems must meet the requirements in §§ 154.503 through...

  10. 46 CFR 154.522 - Materials for piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Materials for piping. 154.522 Section 154.522 Shipping... Process Piping Systems § 154.522 Materials for piping. (a) The materials for piping systems must meet § 154.625 for the minimum design temperature of the piping, except the material for open ended...

  11. 46 CFR 119.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 119.730 Section... INSTALLATION Piping Systems § 119.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1) Non-vital systems; (2) Aluminum fuel piping on...

  12. Monitoring and Analysis of the Jacking Force of the Large Diameter GRP pipe-jacking in soft soil%软土地区大口径玻璃钢夹砂顶管顶力监测分析

    Institute of Scientific and Technical Information of China (English)

    黄金明

    2009-01-01

    玻璃钢夹砂管因其重量轻、耐腐蚀、摩阻系数小、管道和接口抗渗强度高等优点,在城市给排水管道的顶管施工中得到越来越多的应用.通过现场测试与分析研究了上海软土地区大口径玻璃钢夹砂顶管的顶力特性.结合背景工程两个试验段对玻璃钢夹砂顶管的顶力进行了现场监测,并通过对顶进过程中的管壁土压力测试分析了顶管外壁摩阻力及摩擦系数,获得软土地区玻璃钢夹砂顶管顶力计算的经验公式,为今后同类工程的顶力设计计算提供更加准确有效的方法.

  13. Piping inspection carriage having axially displaceable sensor

    Science.gov (United States)

    Zollinger, William T.; Treanor, Richard C.

    1994-01-01

    A pipe inspection instrument carriage for use with a pipe crawler for performing internal inspections of piping surfaces. The carriage has a front leg assembly, a rear leg assembly and a central support connecting the two assemblies and for mounting an instrument arm having inspection instruments. The instrument arm has a y-arm mounted distally thereon for axially aligning the inspection instrumentation and a mounting block, a linear actuator and axial movement arm for extending the inspection instruments radially outward to operably position the inspection instruments on the piping interior. Also, the carriage has a rotation motor and gear assembly for rotating the central support and the front leg assembly with respect to the rear leg assembly so that the inspection instruments azimuthally scan the piping interior. The instrument carriage allows performance of all piping inspection operations with a minimum of moving parts, thus decreasing the likelihood of performance failure.

  14. Wave Propagation in Pipe-like Structures

    DEFF Research Database (Denmark)

    Morsbøl, Jonas

    Pipe-like shell structures are found in a wide range of practical applications such as: Wind turbine towers, jet engines, brass instruments, and piping systems. For many of these applications, structural vibrations play an important role for their performance. This thesis will in particular focus...... on how the curvature on a thin-walled pipe, as well as a changing radius along a straight thin-walled pipe, affects the waveguide properties. It shows that the waveguide properties of curved pipes roughly can be divided into three regimes: The curved beam regime, the cylinder regime, and the torus regime....... In the curved beam regime the waveguide properties of the pipe can be approximated by classical curved beam theory while in the cylinder regime they can be approximated by cylindrical shell theory. In the torus regime none of the two other regimes apply, and a full-blown shell model is needed. For the straight...

  15. Lightweight Heat Pipes Made from Magnesium

    Science.gov (United States)

    Rosenfeld, John N.; Zarembo, Sergei N.; Eastman, G. Yale

    2010-01-01

    Magnesium has shown promise as a lighter-weight alternative to the aluminum alloys now used to make the main structural components of axially grooved heat pipes that contain ammonia as the working fluid. Magnesium heat-pipe structures can be fabricated by conventional processes that include extrusion, machining, welding, and bending. The thermal performances of magnesium heat pipes are the same as those of equal-sized aluminum heat pipes. However, by virtue of the lower mass density of magnesium, the magnesium heat pipes weigh 35 percent less. Conceived for use aboard spacecraft, magnesium heat pipes could also be attractive as heat-transfer devices in terrestrial applications in which minimization of weight is sought: examples include radio-communication equipment and laptop computers.

  16. Intermediate Temperature Fluids for Heat Pipes and Loop Heat Pipes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project will develop heat pipe and loop heat pipe (LHP) working fluids for what is known as the intermediate...

  17. Validation of on-site job-built guardrails with shoring jack as supports

    Directory of Open Access Journals (Sweden)

    Lan, A.

    2014-06-01

    Full Text Available To protect themselves against fall hazards in a slab-column frame, workers use the row of shoring jacks installed at 1 m from the edge as supports for on-site built guardrails. Inspectors of the Quebec Workers Compensation Board (Commission de la santé et de la sécurité du travail (CSST have expressed concern about the safety and compliance of these on-site built guardrails with the Quebec Safety Code for the Construction Industry (S-2.1, r.4. Some workers have also inquired if the shoring jack can be used as an anchor for a travel restraint system. The present study describes how an evaluation method and a test protocol have been used to verify if guardrails built on-site, with shoring jacks as supports, are safe and comply with the requirements of S-2.1, r.4 and if the shoring jack can be used as an anchor point for a travel restraint system. The results of the study show 1 guardrails built on site with shoring jacks as supports, are safe and comply with S-2.1, r.4 and 2 shoring jacks used as supports for guardrails must not be used as an anchor for a travel restraint system.Para la protección contra el peligro de caída en altura durante la ejecución de la estructura de un edificio, los trabajadores utilizan puntales acodalados a dos forjados y situados a 1 metro del borde de forjado como apoyo de las barandillas de seguridad. Inspectores de la Quebec Workers Compensation Board (Commision de la santé et de la sécurité du travail (CSST han expresado su preocupación por la seguridad y el cumplimiento de estos sistemas de protección en la construcción conforme al Código de Seguridad de Quebec para la industria de la construcción (S-2.1, R.6. Así mismo algunos trabajadores han mostrado su inquietud sobre la utilización de los puntales como sistemas para limitar el desplazamiento. El presente estudio describe un método de evaluación y un procedimiento de ensayo que se han utilizado para verificar si las barandillas de seguridad

  18. Uji Aktivitas Antioksidan Ekstrak Metanol Bunga dan Daun Patikala (Etlingera elatior (Jack R.M.Sm Menggunakan Metode DPPH

    Directory of Open Access Journals (Sweden)

    Virsa Handayani

    2014-08-01

    Full Text Available Patikala (Etlingera elatior (Jack R.M.Sm is a plant of the Zingiberaceae family. Bioactive compounds of patikala (Etlingera elatior (Jack R.M.Sm are flavonoids that act as antioxidants. The purpose of this study was to measure free radical activity in the methanol extract of the flowers and leaves of patikala (Etlingera elatior (Jack R.M.Sm. Extraction of flowers and leaves samples was conducted with maceration method using methanol. Chemical compounds was qualitatively analyzed with specific eluent using Thin Layer Chromatography (TLC to determine the group of active compounds in the extract. Antioxidant activity assay used the immersion method of DPPH (1,1-Diphenyl-2-picryl Hidrazil to measure the absorption at the wavelength of 517 nm and to be compared with the antioxidant activity of quersetin. The results showed that the methanol extract rendemen was at 1.935% for flowers and at 5.17% for leaves. Antioxidant activity of the methanol extract of patikala (Etlingera elatior (Jack RMSm flowers had a weak antioxidant activity with the IC50 value of 101,84 mg/mL and the methanol extracts of patikala (Etlingera elatior (Jack R.M.Sm leaves had a strong antioxidant activity with IC50 value of 30,65 mg/mL. However, these antioxidant activities were lower than that of quercetin with IC50 value of 5.35 mg/mL.

  19. Pipes under internal pressure and bending

    CERN Document Server

    Catinaccio, A

    2009-01-01

    This article covers the general behaviour of a straight uniform pipe, with built-in open ends, subject to internal pressure and in plane bending or curvature. It is intended as a summary of the basic equations driving the unintuitive phenomena of bending and instability of pipes under internal pressure. The analysis covers in addition the investigation of opposite pressure stabilisation effects that can be observed in some orthotropic material pipes like composite pressure hoses.

  20. Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    OpenAIRE

    2016-01-01

    The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled wi...

  1. Secondary vegetation succession on jack pine (Pinus banksiana) cutovers in northeastern Ontario, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Tiveau, Daniel

    2000-07-01

    The effects of different harvesting and site preparation methods on competing vegetation were studied in nine jack pine (Pinus banksiana) cutovers in northeastern Ontario, Canada. Six different treatments plus glyphosate herbiciding and no herbiciding were applied: 1) tree-length harvesting followed by trenching, and full-tree harvesting followed by five site preparations, 2) no site preparation, 3) trenching and 4) blading and compaction as well as blading followed by two planting densities, 5) 1.2m and 6) 2m. Competing vegetation was assessed preharvest and years 1, 2, 3, and 5 postharvest. Data was also available from nine juvenile sites as well as nine semimature sites. Data collection consisted of coverage values of each species as well as structural data for main life forms in height classes. Growth and health data of the planted jack pine seedlings were also available. The data was analyzed using detrended correspondence analysis (DCA), diversity indices and tabular analysis. Three years after the herbicide application there is no difference between the total coverage in the halfplots that have received herbiciding and those that have not, but an alteration of the relative abundance of species groups has developed; glyphosate herbiciding promotes grasses over shrubs. When no site preparation is applied, shrubs increase and compete with the seedlings, whose growth is cut in half compared to the ones that have been site prepared by trenching. Five years after blading, and blading plus compaction, there is still very little vegetation in the research plots, but there is no reduction of the survival rate and growth of the jack pine seedlings. More dense planting after this treatment leads to more competing vegetation, probably due to increased availability of moisture. Grasses do not seem to be affected by compaction and pioneer mosses are promoted by this treatment but compaction leads to a significant reduction of the total coverage of competing vegetation

  2. Tall oil precursors and turpentine in Jack and Eastern White Pine

    Energy Technology Data Exchange (ETDEWEB)

    Conner, A.H.; Diehl, M.A.; Rowe, J.W.

    1980-04-01

    The tall oil precursors and turpentine from jack pine (Pinus banksiana Lamb.) and eastern white pine (Pinus strobus L.) were investigated. The tall oil precursors (resin acids, fatty acids, and unsaponifiables were determined by chemical fractionation of the nonvolatile diethyl ether extractives (NVEE) of these speices: (approximate % resin acids, % fatty acids, % unsaponifiables, and % acids other that fatty and resin acids) - jack pine sapwood (10, 60, 10, 20%), heartwood (38, 12, 6, 44%); eastern white pine sapwood (11, 57, 9, 22%), and heartwood (11, 18, 10, 62%). The resin acids were a mixture of the pimaric and abietic acids common to pines. In addition, eastern white pine contained major amounts of the resin acid, anticopalic acid. The fatty acids were predominately oleic, linoleic, and 5, 9, 12-octadecatrienoic acids. The unsaponsiables were a complex mixture of diterpenes and sterols (mainly campesterol and sitosterol). On treating these species with paraquat, lightwood occurred in the sapwood but not in the heartwood areas as we have oberved with other pines. The NVEE of the lightwood areas contained increased amounts of resin acids, unsaponifiables, and acids other than fatty and resin acids. The total fatty acid content was essentially unchanged. Since fatty acid components are preferentially lost by esterification with neutral alcoholic constituents in the unsaponifiables during the distillation refining of crude tall oil, the increased unsaponifiables relative to the constant fatty acid content might result in a net reduction in fatty acid recovery from lightered trees. The turpentine content of both jack and eastern white pine increased on lightering and was primarily a mixture of ..cap alpha..- and ..beta..-pinene.

  3. Development of bore tools for pipe inspection

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    In the International Thermonuclear Reactor (ITER), replacement and maintenance on in-vessel components requires that all cooling pipes connected be cut and removed, that a new component be installed, and that all cooling pipes be rewelded. After welding is completed, welded area must be inspected for soundness. These tasks require a new work concept for securing shielded area and access from narrow ports. Tools had to be developed for nondestructive inspection and leak testing to evaluate pipe welding soundness by accessing areas from inside pipes using autonomous locomotion welding and cutting tools. A system was proposed for nondestructive inspection of branch pipes and the main pipe after passing through pipe curves, the same as for welding and cutting tool development. Nondestructive inspection and leak testing sensors were developed and the basic parameters were obtained. In addition, the inspection systems which can move inside pipes and conduct the nondestructive inspection and the leak testing were developed. In this paper, an introduction will be given to the current situation concerning the development of nondestructive inspection and leak testing machines for the branch pipes. (author)

  4. Plastic pipe systems failure investigation and diagnosis

    CERN Document Server

    Farshad, Mehdi

    2011-01-01

    Industrial and domestic piping is increasingly made from various plastics and composites, and these materials withstand heavy use over long periods. They are, however, affected by environmental and other factors over time and can degrade, causing major problems within piping systems. Farshad's book deals with why plastic pipes and systems fail, and with how to investigate and diagnose such failures. Pipes may buckle, fracture, change in dimensions and colour, blister and delaminate, corrode through stress, be abraded and obstructed: all these cause problems and lead to loss of efficient operat

  5. Fracture mechanics parameters of multilayer pipes

    Directory of Open Access Journals (Sweden)

    Šestáková L.

    2007-10-01

    Full Text Available Multilayer pipes consisting of different materials are frequently used in praxis because of partial improvement of the properties of pipe systems. To estimate lifetime of these pipes the basic fracture parameters have to be determined. In this work finite element calculations are applied in order to estimate the stress intensity factor K and T-stress values for a new type of non-homogenous C-shape specimen. The application of calculated K and T values to laboratory estimation of fracture toughness and its transferability to real pipe system is discussed.

  6. Water pipe smoking and dermatologic consequences.

    Science.gov (United States)

    Wollina, U

    2015-08-01

    Water pipe smoking is a recently growing addiction worldwide. It has become popular in Africa and the Western World and enfaces a renaissance in Middle East and Asia. The smoking technique leads to a different exposure to potential hazardous compounds compared to cigarette or classical pipe smoking. The common assumption that water pipe smoking is less dangerous to health is not substantiated by scientific data. Non-tobacco-based preparations reduce the exposure to nicotine but may contain equal or even higher concentrations of other toxic compounds. The medical literature on adverse effect of water pipe smoking on skin and oral mucosa is reviewed but future research is a demand.

  7. Right cranial lung lobe torsion after a diaphragmatic rupture repair in a Jack Russell terrier

    Directory of Open Access Journals (Sweden)

    Terzo E

    2008-03-01

    Full Text Available Abstract A seven-year-old male Jack Russell terrier was presented with a history of coughing, generalised weakness and lethargy 10 days after an abdominal coeliotomy to repair a large diaphragmatic rupture. Thoracic radiographs demonstrated a soft tissue mass in the midcaudal right thoracic cavity. Ultrasonographic studies, bronchoscopy and subsequent exploratory thoracotomy confirmed a diagnosis of a right cranial lung lobe torsion (LLT, with an anomalous caudodorsal displacement of the affected lobe. LLT should be considered as a differential diagnosis for respiratory tract disease following diaphragmatic rupture repair.

  8. Contracultura e contramemória em Os Subterrâneos, de Jack Kerouac.

    OpenAIRE

    Silva Junior, Sávio Augusto Lopes da

    2014-01-01

    Programa de Pós-Graduação em Letras. Departamento de Letras, Instituto de Ciências Humanas e Sociais, Universidade Federal de Ouro Preto. Este trabalho pretende analisar a obra literária Os subterrâneos, do autor norte-americano Jack Kerouac, tendo como base os termos contramemória e contracultura. A expressão contramemória foi cunhada por Aleida Assmann (2011), que observa a forma como a literatura constrói uma memória formada a partir de descartes dos arquivos da cultura oficial. Estes d...

  9. Environmental Assessment of Alternate Training Area Jack Pine Flats Idaho Department of Lands Near Coolin, Idaho

    Science.gov (United States)

    2009-05-01

    Permit/Lease Area for SERE School Alternate Training Jack Pine Flats SERE School Permit Area - ·llo<mdNy IBJ Hon Spoc [:::::J ~1’.1 --~ N W+E s...Requisite to Protect Public Health and Welfare with an Adequate Margin of Safety, EPA/ONAC 550/9-74-004, March 1974. Available online : http://www...Preservation Office. Available online : http://www.idahohistory.net/SHPO. IDFG 2005. Idaho Department ofFish and Game Special Use Permit- Game Take

  10. Converse Spring 2009 Collection Jack Purcell & Sea star春季新品预览

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ubiq最近发售了一些来自Converse2009春季系列鞋款。包括了Jack Purcell以及SeaStar两种型号,其中最特别的鞋款是2008年秋季刚刚推出的新鞋款SeaStar,采用海军蓝和白色的搭配,灵感来自于经典的帆船鞋,与Converse其他鞋款有着较明显的区别,但不失为休闲好选择。

  11. [A new alpha chain of jacalin from two wild species of jack-fruit seeds].

    Science.gov (United States)

    Ngoc, L D; Brillard, M; Hoebeke, J; Aucouturier, P

    1995-02-01

    Jacalins, from jack-fruit seeds of 2 wild species (Artocarpus asperulus, Artocarpus masticata) were purified by mucine-sepharose 4B affinity chromatography. The alpha and beta chains were separated by reverse phase high pressure liquid chromatography (HPLC). Analysis by HPLC with a C8 column and the determination of the N-terminal sequence of the alpha-chain of these jacalins allowed the identification of a new alpha-chain. Immunological cross-reactivity and carbohydrate specificity indicate that jacalins possessing the new alpha-chain conserve structural and functional properties of the other members of Artocarpus genus.

  12. Evaluation of the potency activity of aphrodisiac in Eurycoma longifolia Jack.

    Science.gov (United States)

    Ang, H H; Ikeda, S; Gan, E K

    2001-08-01

    The butanol, methanol, water and chloroform extracts of the roots of Eurycoma longifolia Jack were studied using various tests of potency of treated male rats. The results showed that E. longifolia produced a dose-dependent, recurrent and significant increase in the episodes of penile reflexes as evidenced by increases in quick flips, long flips and erections of the treated male rats during the 30 min observation period. These results provide further evidence that E. longifolia increases the aphrodisiac potency activity in treated animals.

  13. Burn Severity Dominates Understory Plant Community Response to Fire in Xeric Jack Pine Forests

    OpenAIRE

    Pinno, Bradley D.; Ruth C. Errington

    2016-01-01

    Fire is the most common disturbance in northern boreal forests, and large fires are often associated with highly variable burn severities across the burnt area. We studied the understory plant community response to a range of burn severities and pre-fire stand age four growing seasons after the 2011 Richardson Fire in xeric jack pine forests of northern Alberta, Canada. Burn severity had the greatest impact on post-fire plant communities, while pre-fire stand age did not have a significant im...

  14. Narrative features of 12 klondike stories by Jack London : semiodiscursive and textual approach

    OpenAIRE

    Kuzmicheva, Maria

    2013-01-01

    En este trabajo de investigación exploramos doce cuentos del escritor americano Jack London. Nuestro objetivo es la aplicación del marco teórico del análisis del discurso a estos textos narrativos para poner de manifiesto sus estrategias discursivas. Hemos escogido estos doce cuentos sobre Klondike y la “quimera del oro” por ser especialmente adecuados al tipo de investigación que nos hemos propuesto realizar. Para analizar este corpus hemos recurrido a fundamentos teó...

  15. Location of Agricultural Drainage Pipes and Assessment of Agricultural Drainage Pipe Conditions Using Ground Penetrating Radar

    Science.gov (United States)

    Methods are needed to not only locate buried agricultural drainage pipe, but to also determine if the pipes are functioning properly with respect to water delivery. The primary focus of this research project was to confirm the ability of ground penetrating radar (GPR) to locate buried drainage pipe ...

  16. The effect of water limitation on volatile emission, tree defense response, and brood success of Dendroctonus ponderosae in two pine hosts, lodgepole and jack pine

    Directory of Open Access Journals (Sweden)

    Inka eLusebrink

    2016-02-01

    Full Text Available The mountain pine beetle (MPB; Dendroctonus ponderosae has recently expanded its range from lodgepole pine forest into the lodgepole × jack pine hybrid zone in central Alberta, within which it has attacked pure jack pine. This study tested the effects of water limitation on tree defense response of mature lodgepole and jack pine (Pinus contorta and Pinus banksiana trees in the field. Tree defense response was initiated by inoculation of trees with the MPB-associated fungus Grosmannia clavigera and measured through monoterpene emission from tree boles and concentration of defensive compounds in phloem, needles, and necrotic tissues. Lodgepole pine generally emitted higher amounts of monoterpenes than jack pine; particularly from fungal-inoculated trees. Compared to non-inoculated trees, fungal inoculation increased monoterpene emission in both species, whereas water treatment had no effect on monoterpene emission. The phloem of both pine species contains (--α-pinene, the precursor of the beetle’s aggregation pheromone, however lodgepole pine contains two times as much as jack pine. The concentration of defensive compounds was 70-fold greater in the lesion tissue in jack pine, but only 10-fold in lodgepole pine compared to healthy phloem tissue in each species, respectively. Water-deficit treatment inhibited an increase of L-limonene as response to fungal inoculation in lodgepole pine phloem. The amount of myrcene in jack pine phloem was higher in water-deficit trees compared to ambient trees. Beetles reared in jack pine were not affected by either water or biological treatment, whereas beetles reared in lodgepole pine benefited from fungal inoculation by producing larger and heavier female offspring. Female beetles that emerged from jack pine bolts contained more fat than those that emerged from lodgepole pine, even though lodgepole pine phloem had a higher nitrogen content than jack pine phloem. These results suggest that jack pine chemistry

  17. Literature review and experimental investigation of heat pipes

    Science.gov (United States)

    Barsch, W. O.; Schoenhals, R. J.; Viskanta, R.; Winter, E. R. F.

    1971-01-01

    Tests on heat pipes determine operational limits, external boundary conditions, noncondensable gas effects, startup behavior, and geometric configurations. Experiment consists of design, construction, and testing of an apparatus for measuring wick properties, conventional heat pipes and coplanar heat pipes.

  18. Impact of changes to T and R 5-5A on jack-up system reliability levels

    Energy Technology Data Exchange (ETDEWEB)

    Morandi, A.C.

    2003-07-01

    This report aims to develop a robust methodology to provide quantified guidance relating to the impact on reliability of changes to T and R 5-5A being presently considered by the industry. This will facilitate the industry consensus necessary for such changes to be fully incorporated into jack-up site assessment. Covers phase I of the work. Previews previous pushover and reliability analyses, and areas where modelling improvements are recommended were identified. Factors that affect jack-up system reliability were identified and a premise for performing reliability analyses of jack-ups utilizing state-of-the-art modelling is outlined. Two rig/location cases were selected that were as close to the T and R 5-5A calibration cases as changes to T and R 5-5A on unity checks were evaluated based on such cases. (author)

  19. Jack Kerouac

    OpenAIRE

    Cragun, Hailey

    2016-01-01

    Kerouac emerged as one of the brightest stars in the firmament of American letters due to the success of his 1957 novel, On the Road, but this fame would contribute to his undoing. Despite the fact that he had devoted himself to literary success for many years, Kerouac was unprepared for either the hostility leveled at his experimental style or the adulation of fans. He was in some ways famously shy, too self-conscious or insecure even to read his recently completed volume of poetry, Mexico C...

  20. Jack Kerouac

    OpenAIRE

    2013-01-01

    Kerouac emerged as one of the brightest stars in the firmament of American letters due to the success of his 1957 novel, On the Road, but this fame would contribute to his undoing. Despite the fact that he had devoted himself to literary success for many years, Kerouac was unprepared for either the hostility leveled at his experimental style or the adulation of fans. He was in some ways famously shy, too self-conscious or insecure even to read his recently completed volume of poetry, Mexico C...

  1. Heat Pipe with Axial Wick

    Science.gov (United States)

    Ambrose, Jay H. (Inventor); Holmes, Rolland (Inventor)

    2016-01-01

    A heat pipe has an evaporator portion, a condenser portion, and at least one flexible portion that is sealingly coupled between the evaporator portion and the condenser portion. The flexible portion has a flexible tube and a flexible separator plate held in place within the flexible tube so as to divide the flexible tube into a gas-phase passage and a liquid-phase artery. The separator plate and flexible tube are configured such that the flexible portion is flexible in a plane that is perpendicular to the separator plate.

  2. Buckling Characteristics of Cylindrical Pipes

    Institute of Scientific and Technical Information of China (English)

    Toshiaki Sakurai

    2015-01-01

    This paper describes the buckling pattern of the body frame by energy absorbed efficiency of crashworthiness related toresearch of the buckling characteristics of aluminum cylindrical pipes with various diameters formed mechanical tools. Experimentswere performed by the quasi-static test without lubrication between specimen and equipment. According to the change in the radiusversus thickness of the specimen, the buckling phenomena are transformed from folding to bellows and the rate of energy absorptionis understood. In crashworthiness, frames are characterized by the folding among three patterns from the absorbed energy efficiencypoint of view and weight reduction. With the development of new types of transport such as electric vehicles, innovated bodystructure should be designed.

  3. Jack of all trades, master of some? On the role of phenotypic plasticity in plant invasions.

    Science.gov (United States)

    Richards, Christina L; Bossdorf, Oliver; Muth, Norris Z; Gurevitch, Jessica; Pigliucci, Massimo

    2006-08-01

    Invasion biologists often suggest that phenotypic plasticity plays an important role in successful plant invasions. Assuming that plasticity enhances ecological niche breadth and therefore confers a fitness advantage, recent studies have posed two main hypotheses: (1) invasive species are more plastic than non-invasive or native ones; (2) populations in the introduced range of an invasive species have evolved greater plasticity than populations in the native range. These two hypotheses largely reflect the disparate interests of ecologists and evolutionary biologists. Because these sciences are typically interested in different temporal and spatial scales, we describe what is required to assess phenotypic plasticity at different levels. We explore the inevitable tradeoffs of experiments conducted at the genotype vs. species level, outline components of experimental design required to identify plasticity at different levels, and review some examples from the recent literature. Moreover, we suggest that a successful invader may benefit from plasticity as either (1) a Jack-of-all-trades, better able to maintain fitness in unfavourable environments; (2) a Master-of-some, better able to increase fitness in favourable environments; or (3) a Jack-and-master that combines some level of both abilities. This new framework can be applied when testing both ecological or evolutionary oriented hypotheses, and therefore promises to bridge the gap between the two perspectives.

  4. UPAYA INISIASI KALUS TABAT BARITO (Ficus deltoidea Jack DENGAN KULTUR JARINGAN

    Directory of Open Access Journals (Sweden)

    Heru Sudrajad

    2014-03-01

    Full Text Available Tabat barito (Ficus deltoidea Jack representing one of the plant for medicine. Medicinal plant instructed from conducting result, so that  need the seed which good with quality uniform and during which at the same time. This research is conducted to remember require to be developed and standard certifiable plant conducting upon which medicinal plant. One of the step needed by is the effort certifiable seed levying. technique of tissue culture have the excess of because is not influenced by climate with the time produce relative quickly, free of kontaminasi microbe and do not need the wide of farm. This research use the method of eksperimental of laboratory of Medicinal Plant an Tradicional Medicine Research and Developent Office the media MS (Murashige Skoog with the treatment regulator grow the Benzilamino Purin with the concentration 3, 4, 5, 6 mg/l and giberelin with the concentration 1, 2, 3, 4 mg/l. Perception conducted to a period to growing early callus and callus growth with the incubation period 60 day. Result of research indicate that the combination of regulator grow the BAP concentration 4-6 mg/l and giberelin 2-4 mg/l is got by a callus. Treatment of media MS enriched by BAP 6 mg/l and giberelin 4 mg/l obtained by result of time grow early quickest fastest that is 28 day with the best callus growth.Kata kunci: Tabat barito, Ficus deltoida Jack., tissue culture, BAP, giberelin,

  5. The construction of identity in a consumerist society: Delillo’s Jack Gladney

    Directory of Open Access Journals (Sweden)

    Sanja Matković

    2016-02-01

    Full Text Available This paper deals with the construction of the postmodern identity of Jack Gladney, the main character in Don DeLillo’s White Noise (1985. Employing (postmodern, social psychology, and psychoanalytic theories of Zygmunt Bauman, Erich Fromm, Jean Baudrillard, and Gilles Lipovetsky, it analyzes the construction of Gladney’s character through his social roles as professor, husband, and consumer in the narrow sense of the word in order to deduce that his consumerist practices have spread to all aspects of his life. This reading reveals a new interpretation of Gladney’s fear of death; it shows that Gladney’s thanatophobia represents a consequence of his atheistic worldview. Namely, unable to find a haven in religion, he unsuccessfully seeks the meaning of life and death elsewhere, mainly in consumerism, which is identified as the source of his alienation from himself, people, and God. This paper suggests that numerous problems of postmodern life are caused by the lack of faith in God and proposes a conclusion that religion itself could be the answer to the difficulties faced by postmodern individuals with fragmented identities such as Jack Gladney.

  6. Jack-of-all-trades effects drive biodiversity-ecosystem multifunctionality relationships in European forests.

    Science.gov (United States)

    van der Plas, Fons; Manning, Peter; Allan, Eric; Scherer-Lorenzen, Michael; Verheyen, Kris; Wirth, Christian; Zavala, Miguel A; Hector, Andy; Ampoorter, Evy; Baeten, Lander; Barbaro, Luc; Bauhus, Jürgen; Benavides, Raquel; Benneter, Adam; Berthold, Felix; Bonal, Damien; Bouriaud, Olivier; Bruelheide, Helge; Bussotti, Filippo; Carnol, Monique; Castagneyrol, Bastien; Charbonnier, Yohan; Coomes, David; Coppi, Andrea; Bastias, Cristina C; Muhie Dawud, Seid; De Wandeler, Hans; Domisch, Timo; Finér, Leena; Gessler, Arthur; Granier, André; Grossiord, Charlotte; Guyot, Virginie; Hättenschwiler, Stephan; Jactel, Hervé; Jaroszewicz, Bogdan; Joly, François-Xavier; Jucker, Tommaso; Koricheva, Julia; Milligan, Harriet; Müller, Sandra; Muys, Bart; Nguyen, Diem; Pollastrini, Martina; Raulund-Rasmussen, Karsten; Selvi, Federico; Stenlid, Jan; Valladares, Fernando; Vesterdal, Lars; Zielínski, Dawid; Fischer, Markus

    2016-03-24

    There is considerable evidence that biodiversity promotes multiple ecosystem functions (multifunctionality), thus ensuring the delivery of ecosystem services important for human well-being. However, the mechanisms underlying this relationship are poorly understood, especially in natural ecosystems. We develop a novel approach to partition biodiversity effects on multifunctionality into three mechanisms and apply this to European forest data. We show that throughout Europe, tree diversity is positively related with multifunctionality when moderate levels of functioning are required, but negatively when very high function levels are desired. For two well-known mechanisms, 'complementarity' and 'selection', we detect only minor effects on multifunctionality. Instead a third, so far overlooked mechanism, the 'jack-of-all-trades' effect, caused by the averaging of individual species effects on function, drives observed patterns. Simulations demonstrate that jack-of-all-trades effects occur whenever species effects on different functions are not perfectly correlated, meaning they may contribute to diversity-multifunctionality relationships in many of the world's ecosystems.

  7. The Jellyfish hunter--Jack Barnes: a pioneer medical toxinologist in Australia.

    Science.gov (United States)

    Pearn, John; Fenner, Peter

    2006-12-01

    Dr Jack Handyside Barnes (1922-1985) was one of the small and elite group of Pacific marine toxinologists whose work was characterised by an uncompromising rugged persona, a focussed resolve to solve challenging problems of human clinical envenomation, and who conducted curiosity-driven research under conditions of scientific isolation. He was a pioneering advocate for the preservation of marine heritage, particularly that of the Great Barrier Reef. A former military commando who later became a general medical practitioner with extensive surgical and obstetric skills, in 1947 he was appointed the Medical Superintendent of Thursday Island in the Torres Strait. Later (from January 1953), he worked indefatigably as a general medical practitioner in Cairns, in tropical North Australia. For four decades (1945-1985), Jack Barnes undertook detailed laboratory, clinical and field research into invertebrate envenomation, particularly medusan toxinology. In 1960 he discovered the species responsible for the Irukandji syndrome, a small carybdeid named Carukia barnesi in his honour. He invented the research technique for the extraction of venom from the world's most venomous creature, the Pacific box Jellyfish, Chironex fleckeri. By 1960, he had published taxonomic details of nematocyst structure and clinical envenomation details consequent upon stings by Physalia, Cyanea, Chironex, Chiropsalmus and Carukia. This paper is a précis of the chronology of his life, contributions and influence.

  8. Influence of seedbed, light environment, and elevated night temperature on growth and carbon allocation in pitch pine (Pinus rigida) and jack pine (Pinus banksiana) seedlings

    Science.gov (United States)

    Michael E. Day; Jessica L. Schedlbauer; William H. Livingston; Michael S. Greenwood; Alan S. White; John C. Brissette

    2005-01-01

    Jack pine (Pinus banksiana Lamb.) and pitch pine (Pinus rigida Mill.) are two autecologically similar species that occupy generally disjunct ranges in eastern North America. Jack pine is boreal in distribution, while pitch pine occurs at temperate latitudes. The two species co-occur in a small number of stands along a 'tension...

  9. Aging Jack-Up Rig Fleet in Need of 200 NewbuUds BY ROB ALMEIDA ON JUNE 22,2012-6-26

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    At the 25th annual Marine Money conference in New York this week, Andreas Stubsrud, Head of Research at Pareto Securities, predicted a need for 200 new jack up rigs as nearly half of the 450 jack ups worldwide approach their 40th birthdays by 2020.

  10. INFLUENCE OF PIPE ANGLE ON BEDLOAD TRANSPORT IN AN INCLINED PIPE

    Institute of Scientific and Technical Information of China (English)

    David M. ADMIRAAL

    2003-01-01

    A number of reservoirs in Nebraska have been retrofitted with sediment bypass systems to extend their lifespan. The bypass systems are best suited for rerouting sediment that travels as bedload since bedload is relatively easy to capture at reservoir inlets. Because of their size, the captured sediment particles sometimes travel as bedload in the bypass system as well. Studies have been done to quantify head losses in horizontal pipes with different water and sediment flow rates, and the results have been used to assess the practicality of bypass systems for specific prototypes. However, much less has been done to evaluate the performance of inclined pipes for bypassing sediment. Furthermore, little has been done to understand how bedforms influence head losses in the pipes. In order to better understand the behavior of sediment transport within pipes, an experimental apparatus was constructed to simulate a range of sediment loading rates, water flow rates, and pipe inclination angles. Three pressure taps with a spacing of 1.5 m were installed in the pipe at a location sufficiently downstream from the inlet. One section of the pipe was replaced with an acrylic pipe of equivalent internal diameter so that bedform shapes and sizes could be measured for different flow conditions. For each flow condition, the pressure drop in the pipe and the sediment transport rate are recorded over time. For coarse sediment, the inclination angle ofthe pipe and the sediment transport rate both have a strong influence on flow properties, and, thus, head losses in the pipe.

  11. PE管管材性能探讨%Pipe Performance of PE Pipe

    Institute of Scientific and Technical Information of China (English)

    李子臣

    2011-01-01

    目前中国的塑料管道正在稳步发展,其中PE管强劲的发展势头最为令人瞩目.PE管的使用领域广泛,其中给水管和燃气管是其两个最大的应用市场.本文简单阐述了PE管的组成成分,对比分析了PE管的性能,最后论述了PE管的用途.%At present, China's plastic pipe is steadily developing, and strong momentum of development of the PE pipe is the most remarkable. PE pipe has a wide use, in which water pipe and gas pipe are two largest markets for application. This paper briefly describes the composition of PE pipe, makes comparative analysis of its performance, and finally discusses the use of PE pipe.

  12. 49 CFR 230.62 - Dry pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Dry pipe. 230.62 Section 230.62 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Pipes §...

  13. Technical Study of Slotted Pipe Working

    Institute of Scientific and Technical Information of China (English)

    Yang Helai; Su Feng

    1996-01-01

    @@ Introduction Slotted pipe is a kind of tool used in the oilfield for drilling wells to proof sand. There are many difficulties in working out several thousands seams which are about 0.3mm to 0.6 mm wide on a 10 meter long alloy steel pipe,and the types are various, such as straight and trapezoid.

  14. Heat-pipe thermionic reactor concept

    DEFF Research Database (Denmark)

    Storm Pedersen, E.

    1967-01-01

    Main components are reactor core, heat pipe, thermionic converter, secondary cooling system, and waste heat radiator; thermal power generated in reactor core is transported by heat pipes to thermionic converters located outside reactor core behind radiation shield; thermionic emitters are in direct...

  15. Updating piping probabilities with survived historical loads

    NARCIS (Netherlands)

    Schweckendiek, T.; Kanning, W.

    2009-01-01

    Piping, also called under-seepage, is an internal erosion mechanism, which can cause the failure of dikes or other flood defence structures. The uncertainty in the resistance of a flood defence against piping is usually large, causing high probabilities of failure for this mechanism. A considerable

  16. 75 FR 877 - Drill Pipe From China

    Science.gov (United States)

    2010-01-06

    ... COMMISSION Drill Pipe From China AGENCY: International Trade Commission. ACTION: Institution of antidumping... States is materially retarded, by reason of imports from China of drill pipe, provided for in subheadings... Government of China. Unless the Department of Commerce extends the time for initiation pursuant to...

  17. Heat pipe thermosyphon heat performance calculation

    Science.gov (United States)

    Novomestský, Marcel; Kapjor, Andrej; Papučík, Štefan; Siažik, Ján

    2016-06-01

    In this article the heat performance of the heat pipe thermosiphon is achieved through numerical model. The heat performance is calculated from few simplified equations which depends on the working fluid and geometry. Also the thermal conductivity is good to mentioning, because is really interesting how big differences are between heat pipes and full solid surfaces.

  18. Energy Industry:Hunger for Steel Pipe?

    Institute of Scientific and Technical Information of China (English)

    Berry Chen

    2009-01-01

    @@ After the ups and downs of Chinese steel pipe market in 2008, industry structure changes are taking place quietly. Some enterprises with high-end oil and natural gas pipes and high-pressure boiler tubes have not been much offected in this storm, and won good market demand, while others with low-end products have been eliminated.

  19. DEPOSITION OF PARTICLES IN TURBULENT PIPE FLOW

    Institute of Scientific and Technical Information of China (English)

    Xiaowei Luo; Suyuan Yu

    2006-01-01

    The deposition of particles in turbulent pipe flow was investigated in terms of two mechanisms, turbulent and thermophoretic. A general equation incorporating these two mechanisms was formulated to calculate the deposition efficiency of aerosol particles in turbulent pipe flow together with thermophoretic deposition. The validity of the equation was confirmed by good agreement between calculated and measured results.

  20. Water driven turbine/brush pipe cleaner

    Science.gov (United States)

    Werlink, Rudy J. (Inventor)

    1995-01-01

    Assemblies are disclosed for cleaning the inside walls of pipes and tubes. A first embodiment includes a small turbine with angled blades axially mounted on one end of a standoff support. An O-ring for stabilizing the assembly within the pipe is mounted in a groove within the outer ring. A replaceable circular brush is fixedly mounted on the opposite end of the standoff support and can be used for cleaning tubes and pipes of various diameters, lengths and configurations. The turbine, standoff support, and brush spin in unison relative to a hub bearing that is fixedly attached to a wire upstream of the assembly. The nonrotating wire is for retaining the assembly in tension and enabling return of the assembly to the pipe entrance. The assembly is initially placed in the pipe or tube to be cleaned. A pressurized water or solution source is provided at a required flow-rate to propel the assembly through the pipe or tube. The upstream water pressure propels and spins the turbine, standoff support and brush. The rotating brush combined with the solution cleans the inside of the pipe. The solution flows out of the other end of the pipe with the brush rotation controlled by the flow-rate. A second embodiment is similar to the first embodiment but instead includes a circular shaped brush with ring backing mounted in the groove of the exterior ring of the turbine, and also reduces the size of the standoff support or eliminates the standoff support.

  1. Geothermal drill pipe corrosion test plan

    Energy Technology Data Exchange (ETDEWEB)

    Caskey, B.C.; Copass, K.S.

    1980-12-01

    Plans are presented for conducting a field test of drill pipe corrosion, comparing air and nitrogen as drilling fluids. This test will provide data for evaluating the potential of reducing geothermal well drilling costs by extending drill pipe life and reducing corrosion control costs. The 10-day test will take place during fall 1980 at the Baca Location in Sandoval County, New Mexico.

  2. Inspection technology for high pressure pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  3. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  4. Kinetics and mechanism of jack bean urease inhibition by Hg2+

    Directory of Open Access Journals (Sweden)

    Du Nana

    2012-12-01

    Full Text Available Abstract Background Jack bean urease (EC 3.5.1.5 is a metalloenzyme, which catalyzes the hydrolysis of urea to produce ammonia and carbon dioxide. The heavy metal ions are common inhibitors to control the rate of the enzymatic urea hydrolysis, which take the Hg2+ as the representative. Hg2+ affects the enzyme activity causing loss of the biological function of the enzyme, which threatens the survival of many microorganism and plants. However, inhibitory kinetics of urease by the low concentration Hg2+ has not been explored fully. In this study, the inhibitory effect of the low concentration Hg2+ on jack bean urease was investigated in order to elucidate the mechanism of Hg2+ inhibition. Results According to the kinetic parameters for the enzyme obtained from Lineweaver–Burk plot, it is shown that the Km is equal to 4.6±0.3 mM and Vm is equal to 29.8±1.7 μmol NH3/min mg. The results show that the inhibition of jack bean urease by Hg2+ at low concentration is a reversible reaction. Equilibrium constants have been determined for Hg2+ binding with the enzyme or the enzyme-substrate complexes (Ki =0.012 μM. The results show that the Hg2+ is a noncompetitive inhibitor. In addition, the kinetics of enzyme inhibition by the low concentration Hg2+ has been studied using the kinetic method of the substrate reaction. The results suggest that the enzyme first reversibly and quickly binds Hg2+ and then undergoes a slow reversible course to inactivation. Furthermore, the rate constant of the forward reactions (k+0 is much larger than the rate constant of the reverse reactions (k-0. By combining with the fact that the enzyme activity is almost completely lost at high concentration, the enzyme is completely inactivated when the Hg2+ concentration is high enough. Conclusions These results suggest that Hg2+ has great impacts on the urease activity and the established inhibition kinetics model is suitable.

  5. Recovering the primary geochemistry of Jack Hills zircons through quantitative estimates of chemical alteration

    Science.gov (United States)

    Bell, Elizabeth A.; Boehnke, Patrick; Harrison, T. Mark

    2016-10-01

    Despite the robust nature of zircon in most crustal and surface environments, chemical alteration, especially associated with radiation damaged regions, can affect its geochemistry. This consideration is especially important when drawing inferences from the detrital record where the original rock context is missing. Typically, alteration is qualitatively diagnosed through inspection of zircon REE patterns and the style of zoning shown by cathodoluminescence imaging, since fluid-mediated alteration often causes a flat, high LREE pattern. Due to the much lower abundance of LREE in zircon relative both to other crustal materials and to the other REE, disturbance to the LREE pattern is the most likely first sign of disruption to zircon trace element contents. Using a database of 378 (148 new) trace element and 801 (201 new) oxygen isotope measurements on zircons from Jack Hills, Western Australia, we propose a quantitative framework for assessing chemical contamination and exchange with fluids in this population. The Light Rare Earth Element Index is scaled on the relative abundance of light to middle REE, or LREE-I = (Dy/Nd) + (Dy/Sm). LREE-I values vary systematically with other known contaminants (e.g., Fe, P) more faithfully than other suggested proxies for zircon alteration (Sm/La, various absolute concentrations of LREEs) and can be used to distinguish primary compositions when textural evidence for alteration is ambiguous. We find that zircon oxygen isotopes do not vary systematically with placement on or off cracks or with degree of LREE-related chemical alteration, suggesting an essentially primary signature. By omitting zircons affected by LREE-related alteration or contamination by mineral inclusions, we present the best estimate for the primary igneous geochemistry of the Jack Hills zircons. This approach increases the available dataset by allowing for discrimination of on-crack analyses (and analyses with ambiguous or no information on spot placement or

  6. CoJACK: A High-Level Cognitive Architecture with Demonstrations of Moderators, Variability, and Implications for Situation Awareness

    Science.gov (United States)

    2012-01-01

    defined, to CoJACK (Ritter, Reifers, Klein, & Schoelles, 2007) based on task appraisal theory (e.g., Cannon, 1932; Lazarus & Folkman, 1984; Selye...Cambridge, MA: MIT Press. Lazarus , R. S., & Folkman, S. (1984). Stress, appraisal and coping. New York: Springer Publishing. Lovett, M. C., Daily, L

  7. Healing of the Acutely Injured Anterior Cruciate Ligament: Functional Treatment with the ACL-Jack, a Dynamic Posterior Drawer Brace.

    Science.gov (United States)

    Jacobi, Matthias; Reischl, Nikolaus; Rönn, Karolin; Magnusson, Robert A; Gautier, Emanuel; Jakob, Roland P

    2016-01-01

    Background. The injured anterior cruciate ligament (ACL) has a limited healing capacity leading to persisting instability. Hypothesis/Purpose. To study if the application of a brace, producing a dynamic posterior drawer force, after acute ACL injury reduces initial instability. Study Design. Cohort study. Methods. Patients treated with the ACL-Jack brace were compared to controls treated with primary ACL reconstruction und controls treated nonsurgically with functional rehabilitation. Measurements included anterior laxity (Rolimeter), clinical scores (Lysholm, Tegner, and IKDC), and MRI evaluation. Patients were followed up to 24 months. Results. Patients treated with the ACL-Jack brace showed a significant improvement of anterior knee laxity comparable to patients treated with ACL reconstruction, whereas laxity persisted after nonsurgical functional rehabilitation. The failure risk (secondary reconstruction necessary) of the ACL-Jack group was however 21% (18 of 86) within 24 months. Clinical scores were similar in all treatment groups. Conclusion. Treatment of acute ACL tears with the ACL-Jack brace leads to improved anterior knee laxity compared to nonsurgical treatment with functional rehabilitation.

  8. Healing of the Acutely Injured Anterior Cruciate Ligament: Functional Treatment with the ACL-Jack, a Dynamic Posterior Drawer Brace

    Science.gov (United States)

    Reischl, Nikolaus; Rönn, Karolin; Magnusson, Robert A.; Gautier, Emanuel; Jakob, Roland P.

    2016-01-01

    Background. The injured anterior cruciate ligament (ACL) has a limited healing capacity leading to persisting instability. Hypothesis/Purpose. To study if the application of a brace, producing a dynamic posterior drawer force, after acute ACL injury reduces initial instability. Study Design. Cohort study. Methods. Patients treated with the ACL-Jack brace were compared to controls treated with primary ACL reconstruction und controls treated nonsurgically with functional rehabilitation. Measurements included anterior laxity (Rolimeter), clinical scores (Lysholm, Tegner, and IKDC), and MRI evaluation. Patients were followed up to 24 months. Results. Patients treated with the ACL-Jack brace showed a significant improvement of anterior knee laxity comparable to patients treated with ACL reconstruction, whereas laxity persisted after nonsurgical functional rehabilitation. The failure risk (secondary reconstruction necessary) of the ACL-Jack group was however 21% (18 of 86) within 24 months. Clinical scores were similar in all treatment groups. Conclusion. Treatment of acute ACL tears with the ACL-Jack brace leads to improved anterior knee laxity compared to nonsurgical treatment with functional rehabilitation. PMID:28053787

  9. On the Eicosanoid Trail with John Vane and Jack McGiff: 1974-1976. A personal reminiscence.

    Science.gov (United States)

    Flower, R J

    2015-07-01

    In this brief personal reminiscence I comment upon the friendship and mutual understanding that arose between two great scientists and co-travellers, John Vane and Jack McGiff. I relate the events that led up to their meeting and focus on the brief period of time when they worked together on eicosanoid pharmacology in the UK.

  10. Biomechanical Evaluation of the Vertebral Jack Tool and the Inflatable Bone Tamp for Reduction of Osteoporotic Spine Fractures

    NARCIS (Netherlands)

    Sietsma, Maurits S.; Hosman, Allard J. F.; Verdonschot, N. J. J.; Aalsma, Arthur M. M.; Veldhuizen, Albert G.

    2009-01-01

    Study Design. Controlled in vitro study. Objective. To compare two kyphoplasty techniques in cadaveric fractured vertebrae: an experimental vertebral jack tool (VJT) and an inflatable bone tamp (IBT). Summary of Background Data. A previous biomechanical study showed restored strength and stiffness a

  11. Use of the multinomial jack-knife and bootstrap in generalized non-linear canonical correlation analysis

    NARCIS (Netherlands)

    Burg, van der Eeke; Leeuw, de Jan

    1988-01-01

    In this paper we discuss the estimation of mean and standard errors of the eigenvalues and category quantifications in generalized non-linear canonical correlation analysis (OVERALS). Starting points are the delta method equations, but the jack-knife and bootstrap are used to provide finite differen

  12. Magic Words, Magic Brush: The Art of William Butler and Jack Yeats. ArtsEdge Curricula, Lessons and Activities.

    Science.gov (United States)

    Karsten, Jayne

    This curriculum unit, designed for grades 7-12, integrates various artistic disciplines with geography, history, social studies, media, and technology. This unit on William Butler Yeats, the writer, and Jack Yeats, the painter, seeks to immerse students in a study of the brothers as voices of Ireland and as two of the most renowned artists of the…

  13. Casing free district heating pipes; Mantelfria fjaerrvaermeroer

    Energy Technology Data Exchange (ETDEWEB)

    Saellberg, Sven-Erik; Nilsson, Stefan [Swedish National Testing and Research Inst., Goeteborg (Sweden)

    2005-07-01

    Previous studies have shown that polyurethane insulation (PUR foam) on district heating pipes acts as protection against water if it is of good quality, i.e. free from cracks, cavities and other defects. On the other hand water vapour easily diffuses through PUR foam. However this is not a problem as long as the steel pipe is warmer than the surface layer, since the high temperature will prevent the vapour from condensating. What will happen with the insulation of a casing free district heating pipe where the ground water level occasionally reaches above the pipe has not been studied in detail. The current project has studied to what extent moisture enters the PUR foam insulation of two approximately one meter long district heating pipes without casing which have been in the ground for four years. Occasionally, the ground-water has entirely covered the pipes. In addition, the foam has been studied with respect to damage from the surrounding backfill material. Test specimens were taken out of the casing free pipes and were analysed with respect to moisture content. Additional measurements were done with a moisture indicator, and the electric resistance between the steel pipes and the four surveillance wires in each pipe was measured. The results from the various measurement techniques were the compared. The results show that the PUR foam remains dry as long as the service pipe is hot if no defects, such as crack and cavities, are present. Close to the service pipe, the foam actually dries out over time. The moisture content of the middle layer remains more or less constant. Only the colder parts on the outside exhibit an increase in moisture content. It was also seen that defects may lead to water ingress with subsequent humidification of the foam. However, the damaged foam area is limited. This is not the case for a regular pipe with a vapour tight casing, where experience show that moisture tend to spread along the pipe. The pipes were buried in sand and no

  14. Equivalent thermal conductivity of heat pipes

    Institute of Scientific and Technical Information of China (English)

    Zesheng LU; Binghui MA

    2008-01-01

    In precision machining, the machining error from thermal distortion carries a high proportion of the total errors. If a precision machining tool can transfer heat fast, the thermal distortion will be reduced and the machining precision will be improved. A heat pipe working based on phase transitions of the inner working liquid transfers heat with high efficiency and is widely applied in spaceflight and chemical industries. In mechanics, applications of heat pipes are correspondingly less. When a heat pipe is applied to a hydrostatic motor-ized spindle, the thermal distortion cannot be solved dur-ing the heat transfer process because thermal conductivity or equivalent thermal conductivity should be provided first for special application in mechanics. An equivalent thermal conductivity model based on equivalent thermal resistances is established. Performance tests for a screen wick pipe, gravity pipe, and rotation heat pipe are done to validate the efficiency of the equivalent thermal conduc-tivity model. The proposed model provides a calculation method for the thermal distortion analysis of heat pipes applied in the motorized spindle.

  15. Research of Spined Heat-Exchanging Pipes

    Directory of Open Access Journals (Sweden)

    Akulov Kirill

    2016-01-01

    Full Text Available Work is devoted to a research of spined heat-exchanging pipes that are assumed to use in air-cooler exchangers (ACE. The proposed new geometry of finning allows intensifying heat exchange and improving the efficiency of air coolers. It is caused by the increased area of finned surface with a value of finning ratio (the ratio of the area of the smooth pipe to a finned one to 42.7, while in the commercially available ACE, the figure is 22. Besides, the geometrical arrangement of the pin fins turbulizes the airflow. It should be mentioned that an easier method of manufacturing of heat exchanging pipes is proposed to use, which will reduce their costs. The proposed heat exchange pipes are made by winding cut aluminum strip to the supporting pipe or stretching stamped blanks on it. To increase the efficiency of the heat exchange surface pin fins should be as thin and long as possible; however, their strength should be sufficient for deformation-free operation. Fins should be staggered to maximize the distance between them. Spined heat-exchange pipes are designed to operate in a commercially produced ACE and their service is carried out similarly to commercially produced transversely finned pipes.

  16. Methods for Analyzing Pipe Networks

    DEFF Research Database (Denmark)

    Nielsen, Hans Bruun

    1989-01-01

    The governing equations for a general network are first set up and then reformulated in terms of matrices. This is developed to show that the choice of model for the flow equations is essential for the behavior of the iterative method used to solve the problem. It is shown that it is better...... to formulate the flow equations in terms of pipe discharges than in terms of energy heads. The behavior of some iterative methods is compared in the initial phase with large errors. It is explained why the linear theory method oscillates when the iteration gets close to the solution, and it is further...... demonstrated that this method offers good starting values for a Newton-Raphson iteration....

  17. Determination of geomagnetic archaeomagnitudes from clay pipes

    Science.gov (United States)

    Games, K. P.; Baker, M. E.

    1981-02-01

    Archaeomagnitude determinations of a selection of clay pipes dateable to AD 1645+/-10 as well as studies of pottery samples from the same site and of the same age have been made. Values of the magnitude of the ancient magnetic field (Banc), were obtained from two pottery sherds, two pipe bowls and three pipe stems. The values from the sherds and bowls agree within 2% and compare well with the average value of the magnitude of the magnetic field for the seventeenth century as determined by other archaeomagnetic studies. However, the pipe stems give values of Banc which are significantly less than those from the bowls and pottery. We have not yet been able to explain this and thus we suggest that reliable archaeomagnitude determinations can be made from the bowls of clay pipes but not from the stems. Nevertheless, this result provides a new source of material for investigating variations in the geomagnetic field strength over the past 400 yr. Clay pipes have been manufactured in England since the end of the sixteenth century. In the firing process some pipes were broken and disposed of without ever having been smoked. One such collection, discovered at Rainford, Lancashire, in 1978, consisted of a series of discrete dumps including pipes, kiln debris and a small collection of contemporary used earthenware sherds. The internal consideration of the dumps suggested a very short period of activity and archaeologists (P. Davey, personal communication) ascribe all the material to the period 1645+/-10 yr. With such well-dated material, we set out to check whether or not reliable archaeomagnitudes could be obtained from the pipes.

  18. 30 CFR 75.1905-1 - Diesel fuel piping systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Diesel fuel piping systems. 75.1905-1 Section... Diesel fuel piping systems. (a) Diesel fuel piping systems from the surface must be designed and operated... spillage of fuel and that activates an alarm system. (b) All piping, valves and fittings must be—...

  19. 46 CFR 182.720 - Nonmetallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Nonmetallic piping materials. 182.720 Section 182.720... TONS) MACHINERY INSTALLATION Piping Systems § 182.720 Nonmetallic piping materials. (a) Rigid... systems where permitted by paragraph (e) of this section. (c) Nonmetallic piping must not be used...

  20. 46 CFR 119.720 - Nonmetallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Nonmetallic piping materials. 119.720 Section 119.720 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... Piping Systems § 119.720 Nonmetallic piping materials. Nonmetallic piping materials,...

  1. 46 CFR 58.25-20 - Piping for steering gear.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping for steering gear. 58.25-20 Section 58.25-20... MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-20 Piping for steering gear. (a) Pressure piping must... actuating system including the reservoir. The storage tank must be permanently connected by piping so...

  2. 46 CFR 153.294 - Marking of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Marking of piping systems. 153.294 Section 153.294... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.294 Marking of piping systems. (a) Each cargo piping...

  3. 46 CFR 153.280 - Piping system design.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping system design. 153.280 Section 153.280 Shipping... BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.280 Piping system design. (a) Each cargo piping system must...

  4. 46 CFR 182.710 - Piping for vital systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping for vital systems. 182.710 Section 182.710... TONS) MACHINERY INSTALLATION Piping Systems § 182.710 Piping for vital systems. (a) Vital systems are... section is a non-vital system. (c) Piping used in a vital system must: (1) Be composed of...

  5. 46 CFR 116.970 - Protection against hot piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Protection against hot piping. 116.970 Section 116.970 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE... ARRANGEMENT Rails and Guards § 116.970 Protection against hot piping. Piping, including valves, pipe...

  6. 46 CFR 154.512 - Piping: Thermal isolation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Thermal isolation. 154.512 Section 154.512 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.512 Piping: Thermal isolation. Low temperature piping must...

  7. 46 CFR 182.730 - Nonferrous metallic piping materials.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Nonferrous metallic piping materials. 182.730 Section... (UNDER 100 GROSS TONS) MACHINERY INSTALLATION Piping Systems § 182.730 Nonferrous metallic piping materials. (a) Nonferrous metallic piping materials are acceptable for use in the following: (1)...

  8. 46 CFR 154.516 - Piping: Hull protection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Hull protection. 154.516 Section 154.516... and Process Piping Systems § 154.516 Piping: Hull protection. A vessel's hull must be protected from...-522), at: (a) Each piping connection dismantled on a routine basis; (b) Cargo discharge and...

  9. 46 CFR 61.15-15 - Other piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Other piping. 61.15-15 Section 61.15-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND INSPECTIONS Periodic Tests of Piping Systems § 61.15-15 Other piping. (a) All other piping systems shall be...

  10. 46 CFR 154.528 - Piping joints: Flange type.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Flange type. 154.528 Section 154.528... and Process Piping Systems § 154.528 Piping joints: Flange type. (a) A flange must be one of the following types: (1) Welding neck. (2) Slip-on. (3) Socket weld. (b) If the piping is designed for...

  11. 46 CFR 153.910 - Cargo piping plan.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping plan. 153.910 Section 153.910 Shipping... Information § 153.910 Cargo piping plan. No person may operate a tankship unless the tankship has a cargo piping plan that: (a) Shows all cargo piping on the tankship; (b) Shows all cargo valving, pumps,...

  12. 46 CFR 154.519 - Piping relief valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping relief valves. 154.519 Section 154.519 Shipping... Process Piping Systems § 154.519 Piping relief valves. (a) The liquid relief valve that protects the cargo piping system from liquid pressure exceeding the design pressure must discharge into: (1) A cargo...

  13. 46 CFR 56.30-3 - Piping joints (reproduces 110).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping joints (reproduces 110). 56.30-3 Section 56.30-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Selection and Limitations of Piping Joints § 56.30-3 Piping joints (reproduces 110). The type...

  14. 46 CFR 153.292 - Separation of piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Separation of piping systems. 153.292 Section 153.292... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.292 Separation of piping systems. Cargo piping systems must...

  15. 46 CFR 119.710 - Piping for vital systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping for vital systems. 119.710 Section 119.710... Piping Systems § 119.710 Piping for vital systems. (a) Vital systems are those systems that are vital to...-vital system. (c) Piping used in a vital system must meet § 56.60 in subchapter F of this...

  16. 46 CFR 154.514 - Piping: Electrical bonding.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping: Electrical bonding. 154.514 Section 154.514 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... and Process Piping Systems § 154.514 Piping: Electrical bonding. (a) Cargo tanks or piping that...

  17. 46 CFR 98.25-55 - Cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo piping. 98.25-55 Section 98.25-55 Shipping COAST... Cargo piping. (a) Piping shall be of seamless steel meeting the requirements of § 56.60-1 of subchapter F (Marine Engineering) of this chapter. The piping shall be of not less than Schedule 40...

  18. 46 CFR 154.355 - Bow and stern loading piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Bow and stern loading piping. 154.355 Section 154.355... Arrangements § 154.355 Bow and stern loading piping. (a) Bow and stern loading piping must: (1) Meet § 154.310...; (3) Be clearly marked; (4) Be segregated from the cargo piping by a removable spool piece in...

  19. 49 CFR 192.321 - Installation of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Installation of plastic pipe. 192.321 Section 192... Transmission Lines and Mains § 192.321 Installation of plastic pipe. (a) Plastic pipe must be installed below ground level except as provided by paragraphs (g) and (h) of this section. (b) Plastic pipe that...

  20. 49 CFR 192.121 - Design of plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of plastic pipe. 192.121 Section 192.121... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.121 Design of plastic pipe. Subject to the limitations of § 192.123, the design pressure for plastic pipe is determined by either of...

  1. 49 CFR 192.125 - Design of copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of copper pipe. 192.125 Section 192.125... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.125 Design of copper pipe. (a) Copper pipe used in mains must have a minimum wall thickness of 0.065 inches (1.65 millimeters) and must be...

  2. 49 CFR 192.277 - Ductile iron pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Ductile iron pipe. 192.277 Section 192.277 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Ductile iron pipe. (a) Ductile iron pipe may not be joined by threaded joints. (b) Ductile iron pipe may...

  3. 49 CFR 192.105 - Design formula for steel pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design formula for steel pipe. 192.105 Section 192... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.105 Design formula for steel pipe. (a) The design pressure for steel pipe is determined in accordance with the following...

  4. 49 CFR 195.212 - Bending of pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Bending of pipe. 195.212 Section 195.212... PIPELINE Construction § 195.212 Bending of pipe. (a) Pipe must not have a wrinkle bend. (b) Each field bend must comply with the following: (1) A bend must not impair the serviceability of the pipe. (2) Each...

  5. 46 CFR 154.548 - Cargo piping: Flow capacity.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo piping: Flow capacity. 154.548 Section 154.548... and Process Piping Systems § 154.548 Cargo piping: Flow capacity. Piping with an excess flow valve must have a vapor or liquid flow capacity that is greater than the rated closing flow under § 154.546....

  6. 49 CFR 192.275 - Cast iron pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Cast iron pipe. 192.275 Section 192.275... Cast iron pipe. (a) Each caulked bell and spigot joint in cast iron pipe must be sealed with mechanical leak clamps. (b) Each mechanical joint in cast iron pipe must have a gasket made of a...

  7. Ficus deltoidea Jack: A Review on Its Phytochemical and Pharmacological Importance

    Directory of Open Access Journals (Sweden)

    Hamidun Bunawan

    2014-01-01

    Full Text Available Ficus deltoidea Jack (Moraceae has had a long history of use in traditional medicine among the Malays to alleviate and heal ailments such as sores, wounds, and rheumatism and as an after-birth tonic and an antidiabetic drug. Modern pharmacological studies demonstrated that this plant has a wide variety of beneficial attributes for human health. Despite its importance, a review of this species has not been published in the scientific literature to date. Here, we review and summarize the historic and current literature concerning the botany, traditional uses, phytochemistry, pharmacological effects, and toxicity of this wonder plant. This summary could be beneficial for future research aiming to exploit the therapeutic potential of this useful, medicinal species.

  8. Raccoglier lettere. Le “Vico collaborations” di Jack W. Stauffacher e Dennis Letbetter

    Directory of Open Access Journals (Sweden)

    Armando, David

    2010-01-01

    Full Text Available Starting in the early ’70s the San Francisco printer and typographer Jack W. Stauffacher undertook a graphic exploration of Vico’s works, which continued during the past decade together with the photographer Dennis Letbetter. The aim of this article is to present their experience - which is at the same time poetic and historically attentive, focusing on the relationships between text and images, and on the typographical and physical qualities of 18th century editions - to an audience which includes Italian Vico scholars. The text is composed of a brief introduction and an interview with the two artists, and is followed (pp. 94-180 by a photographic presentation of their "Vico collaborations".

  9. Thermodynamic study of CN~- ion inhibition of Jack bean urease using the extended solvation theory

    Institute of Scientific and Technical Information of China (English)

    G. Rezaei Behbehani; A.A. Saboury; M. Mohebbian; S. Tahmasbi Sarvestani; M. Poorheravi

    2009-01-01

    Cyanide ion was studied as an inhibitor of Jack bean urease at 300 K in 30 mmol/L tris buffer, Ph 7. The inhibition was investigated by isothermal titration calorimetry (ITC). The extended solvation model was used for CN~- + JBU interaction over the whole range of CN~- concentrations. The binding parameters recovered from the solvation model were attributed to the cyanide ion interaction. It was found that cyanide ion acted as a non-cooperative inhibitor of urease, and there is a set of 12 ± 0.12 identical and independent binding sites for CN~- ions. The dissociation equilibrium constant is 749.99 μmol/L. The molar enthalpy of binding is △H=-13.60 KJ mol~(-1).

  10. Evapotranspiration and crop coefficients of corn in monoculture and intercropped with jack bean

    Directory of Open Access Journals (Sweden)

    Mário S. P. de Araújo

    Full Text Available ABSTRACT This study was carried out to determine the evapotranspiration (ETc and crop coefficients (Kc for four stages of “Caatingueiro” corn under the climate condition of Seropédica, RJ, Brazil, using weighing lysimeters. The field trial occurred in 2015, from March 18 to June 25, in two areas cultivated with “Caatingueiro’ corn intercropped with jack bean and in monoculture. The reference evapotranspiration (ETo was estimated by the FAO-56 Penman-Monteith model and the Kc values were determined by the ratio between ETc and ETo. The Kc values obtained for the intercropping and monoculture systems, were respectively: 0.78 (I; 1.01 (II; 1.10 (III and 1.01 (IV, and 0.62 (I; 0.92 (II; 1.27 (III and 0.81 (IV, and they were different from the values presented by FAO.

  11. [Malignant narcissism and sexual homicide--exemplified by the Jack Unterweger case].

    Science.gov (United States)

    Haller, R

    1999-01-01

    With the syndrome of malignant narcissism, which is characterised by narcissistic personality disorder, anti-social behaviour, sadism and a marked tendency to paranoid reactions, Kernberg (1985, 1996) describes an independent form of pathological narcissism. According to Stone (1996) this is found in many mass-murderers and serial killers. On the basis of the example of Jack Unterweger the connection between malignant narcissism and sexual offence is discussed as to psychodynamic development, personality structure and psychopathology. Unterweger, who was convicted to lifelong imprisonment in 1976 for sadistic sexual murder, became a wellknown writer in prison and was released prematurely in 1990 as the Austria case of successful rehabilitation. As stated in the sentence passed against him he killed 11 prostitutes in Europe and the USA within the next 18 months, but never pleaded guilty. Psychiatric examination revealed numerous elements of malignant narcissism and the constellation of his development and life was typical of serial offenders.

  12. Coumarins and flavonoid from Murraya paniculata (L.) Jack: Antibacterial and anti-inflammation activity.

    Science.gov (United States)

    Rodanant, Pirasut; Khetkam, Pichit; Suksamrarn, Apichart; Kuvatanasuchati, Jintakorn

    2015-11-01

    The ethyl acetate extract of leaves of Murraya paniculata (L.) Jack was described in the previous in vitro study on the inhibition effect on the growth of periodontopathic bacteria and the reduction of cytokines from LPS-stimulated macrophages. In this study, four coumarins including murrangatin (1), murrangatin acetate (2), murranganonesenecionate (3), micropubescin (4) and one flavonoid, 3', 4', 5', 7-tetramethoxyflavone (5) were isolated from the leaves of ethyl acetate extract of M. paniculata. MTT assay was used to test cytotoxicity on human gingival fibroblast and monocytes. The isolated compounds were evaluated for their antibacterial effect against Porphyromonas gingivalis (ATCC33277) and anti-inflammation on lipopolysaccharide-stimulated inflammation using monocyte cells. All isolated compounds exhibited antibacterial activity against P. gingivalis (ATCC 33277). Murranganonesenecionate (3) was highly potent anti-inflammation properties. The coumarin constituents from M. paniculata leaves might be potential lead molecules for the development of antimicrobial drugs for treating periodontal disease.

  13. Heat pipe testing program test plan

    Energy Technology Data Exchange (ETDEWEB)

    Bienert, W.B.

    1980-03-14

    A test plan is given which describes the tests to be conducted on several typical solar receiver heat pipes. The hardware to be used, test fixtures and rationale of the test program are discussed. The program objective is to perform life testing under simulated receiver conditions, and to conduct performance tests with selected heat pipes to further map their performance, particularly with regard to their transient behavior. Performance requirements are defined. Test fixtures designed for the program are described in detail, and their capabilities for simulating the receiver conditions and their limitations are discussed. The heat pipe design is given. (LEW)

  14. Fatigue analysis of aluminum drill pipes

    Directory of Open Access Journals (Sweden)

    João Carlos Ribeiro Plácido

    2005-12-01

    Full Text Available An experimental program was performed to investigate the fundamental fatigue mechanisms of aluminum drill pipes. Initially, the fatigue properties were determined through small-scale tests performed in an optic-mechanical fatigue apparatus. Additionally, full-scale fatigue tests were carried out with three aluminum drill pipe specimens under combined loading of cyclic bending and constant axial tension. Finally, a finite element model was developed to simulate the stress field along the aluminum drill pipe during the fatigue tests and to estimate the stress concentration factors inside the tool joints. By this way, it was possible to estimate the stress values in regions not monitored during the fatigue tests.

  15. Gas lensing in a heated spinning pipe

    CSIR Research Space (South Africa)

    Mafusire, C

    2006-07-01

    Full Text Available Spinning Pipe C MAFUSIRE1,2, A FORBES2, G SNEDDEN3, C MAHLASE3, MM MICHAELIS4 & M MATHUTHU1 1University of Zimbabwe, Mount Pleasant, Harare, Zimbabwe 2CSIR National Laser Centre, PO Box 395, Pretoria 0001, South Africa 3CSIR Defence Peace Safety... this system. BEAM PROPAGATION THROUGH GAS LENSES The heated spinning pipe acts as a GRIN lens where the refractive index variation inside the pipe is given by The variable parameters of the gas lens in this work were the rotation...

  16. Investigation on Mechanical Property of Seamless Pipe

    Institute of Scientific and Technical Information of China (English)

    ZHAO Li-ming; YANG Xiao-yong; LIU Ye

    2004-01-01

    The mechanical properties of the steel pipe rolled with continuously casting round billet after determining the chemical composition in steel were studied. The results show that the total reduction ratio should be higher than 5.2 when the line pipes of grade B, grade 20 and other general seamless pipe were rolled with continuously casting round billet. And the total reduction ratio should be higher than 10.2 and the grain size should be controlled more than grade 7 for casing of oil countryside tubular goods (OCTG).

  17. Arterial gas occlusions in operating heat pipes

    Science.gov (United States)

    Saaski, E. W.

    1975-01-01

    The effect of noncondensable gases on high performance arterial heat pipes has been investigated both analytically and experimentally. Models have been generated which characterize the dissolution of gases in condensate and the diffusional loss of dissolved gases from condensate in arterial flow. These processes, and others, have been used to postulate stability criteria for arterial heat pipes. Experimental observations of gas occlusions were made using a stainless steel heat pipe equipped with viewing ports, and the working fluids methanol and ammonia with the gas additives helium, argon, and xenon. Observations were related to gas transport models.

  18. Heat pipes theory, design and applications

    CERN Document Server

    Reay, David; Kew, Peter

    2013-01-01

    Heat Pipes, 6th Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students. This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all informat

  19. Characterization of radioactive contamination inside pipes with the Pipe Explorer{sup trademark} system

    Energy Technology Data Exchange (ETDEWEB)

    Cremer, C.D.; Lowry, W.; Cramer, E. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)] [and others

    1995-10-01

    The U.S. Department of Energy`s nuclear facility decommissioning program needs to characterize radiological contamination inside piping systems before the pipe can be recycled, remediated, or disposed. Historically, this has been attempted using hand held survey instrumentation, surveying only the accessible exterior portions of pipe systems. Difficulty, or inability of measuring threshold surface contamination values, worker exposure, and physical access constraints have limited the effectiveness of this approach. Science and Engineering associates, Inc. under contract with the DOE Morgantown Energy Technology Center has developed and demonstrated the Pipe Explorer{trademark} system, which uses an inverting membrane to transport various characterization sensors into pipes. The basic process involves inverting (turning inside out) a tubular impermeable membrane under air pressure. A characterization sensor is towed down the interior of the pipe by the membrane.

  20. Reliability of piping system components. Volume 4: The pipe failure event database

    Energy Technology Data Exchange (ETDEWEB)

    Nyman, R.; Erixon, S. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Tomic, B. [ENCONET Consulting GmbH, Vienna (Austria); Lydell, B. [RSA Technologies, Visat, CA (United States)

    1996-07-01

    Available public and proprietary databases on piping system failures were searched for relevant information. Using a relational database to identify groupings of piping failure modes and failure mechanisms, together with insights from published PSAs, the project team determined why, how and where piping systems fail. This report represents a compendium of technical issues important to the analysis of pipe failure events, and statistical estimation of failure rates. Inadequacies of traditional PSA methodology are addressed, with directions for PSA methodology enhancements. A `data driven and systems oriented` analysis approach is proposed to enable assignment of unique identities to risk-significant piping system component failure. Sufficient operating experience does exist to generate quality data on piping failures. Passive component failures should be addressed by today`s PSAs to allow for aging analysis and effective, on-line risk management. 42 refs, 25 figs.

  1. Coolant choice for the central beryllium pipe of the BESIII beam pipe

    Science.gov (United States)

    Zheng, Li-Fang; Wang, Li; Wu, Ping; Ji, Quan; Li, Xun-Feng; Liu, Jian-Ping

    2010-07-01

    In order to take away much more heat on the BESIII beam pipe to guarantee the normal particle detection, EDM-1 (oil No.1 for electric discharge machining), with good thermal and flow properties was selected as the candidate coolant for the central beryllium pipe of the BESIII beam pipe. Its cooling character was studied and dynamic corrosion experiment was undertaken to examine its corrosion on beryllium. The experiment results show that EDM-1 would corrode the beryllium 19.9 μm in the depth in 10 years, which is weak and can be neglected. Finite element simulation and experiment research were taken to check the cooling capacity of EDM-1. The results show that EDM-1 can meet the cooling requirement of the central beryllium pipe. Now EDM-1 is being used to cool the central beryllium pipe of the BESIII beam pipe.

  2. Jack Rabbit Pretest 2021E PT5 Photonic Doppler Velocimetry Data Volume 5 Section 1

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25

    The Jack Rabbit Pretest (PT) 2021E PT5 was fired on March 17, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT5, 160 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 20, 30, 35, 45, 55, 65, 75 millimeters from the central axis. The experiment was shot at an ambient room temperature of 65 degrees Fahrenheit. The earliest PDV signal extinction was 40.0 microseconds at 45 millimeters. The latest PDV signal extinction time was 64.9 microseconds at 20 millimeters. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 55 millimeters at 12.8 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1877 meters per second. At 65 millimeters the last measured velocity was 2277 meters per second. The low-to-high velocity ratio was 0.82. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 78 kilobars at 11.9 and 21.2 microseconds. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 4.1 microseconds.

  3. Jack Rabbit Pretest 2021E PT4 Photonic Doppler Velocimetry Data Volume 4 Section 1

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25

    The Jack Rabbit Pretest (PT) 2021E PT4 was fired on March 19, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT4, 120 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 10, 20, 25, 30, 35, 40, 50 millimeters from the central axis. The experiment was shot at an ambient room temperature of 64 degrees Fahrenheit. The earliest PDV signal extinction was 44.9 microseconds at 30 millimeters. The latest PDV signal extinction time was 69.5 microseconds at 10 millimeters. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 50 millimeters at 13.3 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1558 meters per second. At 40 millimeters the last measured velocity was 2019 meters per second. The low-to-high velocity ratio was 0.77. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 98.6 kilobars at 15.0 microseconds. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 0.7 microseconds.

  4. Kinetics and Mechanism Study of Competitive Inhibition of Jack-Bean Urease by Baicalin

    Directory of Open Access Journals (Sweden)

    Lirong Tan

    2013-01-01

    Full Text Available Baicalin (BA is the principal component of Radix Scutellariae responsible for its pharmacological activity. In this study, kinetics and mechanism of inhibition by BA against jack-bean urease were investigated for its therapeutic potential. It was revealed that the IC50 of BA against jack-bean urease was 2.74 ± 0.51 mM, which was proved to be a competitive and concentration-dependent inhibition with slow-binding progress curves. The rapid formation of initial BA-urease complex with an inhibition constant of Ki=3.89 × 10−3 mM was followed by a slow isomerization into the final complex with an overall inhibition constant of Ki*=1.47×10-4 mM. High effectiveness of thiol protectors against BA inhibition indicated that the strategic role of the active-site sulfhydryl group of the urease was involved in the blocking process. Moreover, the inhibition of BA was proved to be reversible due to the fact that urease could be reactivated by dithiothreitol but not reactant dilution. Molecular docking assay suggested that BA made contacts with the important activating sulfhydryl group Cys-592 residues and restricted the mobility of the active-site flap. Taken together, it could be deduced that BA was a competitive inhibitor targeting thiol groups of urease in a slow-binding manner both reversibly and concentration-dependently, serving as a promising urease inhibitor for treatments on urease-related diseases.

  5. Jack Rabbit Pretest 2021E PT7 Photonic Doppler Velocimetry Data Volume 7 Section 1

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25

    The Jack Rabbit Pretest (PT) 2021E PT7 experiment was fired on April 3, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT7, 160 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 20, 30, 35, 45, 55, 65, 75 millimeters from the central axis. The experiment was shot at an ambient room temperature of 65 degrees Fahrenheit. The PDV earliest signal extinction was 50.7 microseconds at 45 millimeters. The latest PDV signal extinction time was 65.0 microseconds at 20 millimeters. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 55 millimeters and at 15.2 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1447 meters per second. At 65 millimeters the last measured velocity was 2360 meters per second. The low-to-high velocity ratio was 0.61. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 49 kilobars at 23.3 microseconds. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 4.6 microseconds.

  6. Jack Rabbit Pretest 2021E PT6 Photonic Doppler Velocimetry Data Volume 6 Section 1

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25

    The Jack Rabbit Pretest (PT) 2021E PT6 experiment was fired on April 1, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT6, 160 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 20, 30, 35, 45, 55, 65, 75 millimeters from the central axis. The experiment was shot at an ambient room temperature of 65 degrees Fahrenheit. The earliest PDV signal extinction was 54.2 microseconds at 30 millimeters. The latest PDV signal extinction time was 64.5 microseconds at the central axis. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 55 millimeters at 14.1 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1860 meters per second. At 55 millimeters the last measured velocity was 2408 meters per second. The low-to-high velocity ratio was 0.77. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 227 kilobars at 20.1 microseconds, indicating a late time chemical reaction in the LX-17 dead-zone. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 1.7 microseconds.

  7. Jack Rabbit Pretest 2021E PT3 Photonic Doppler Velocimetry Data Volume 3 Section 1

    Energy Technology Data Exchange (ETDEWEB)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25

    The Jack Rabbit Pretest (PT) 2021E PT3 was fired on March 12, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT3, 120 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 10, 20, 25, 30, 35, 40, 50 millimeters from the central axis. The experiment was shot at an ambient room temperature of 65 degrees Fahrenheit. The earliest PDV signal extinction was 41.7 microseconds at 30 millimeters. The latest PDV signal extinction time was 65.0 microseconds at 10 millimeters. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 40 millimeters at 10.9 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1636 meters per second. At 40 millimeters the last measured velocity was 2056 meters per second. The low-to-high velocity ratio was 0.80. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 64.6 kilobars at 15.7 microseconds. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 2.2 microseconds.

  8. Kinetics and mechanism study of competitive inhibition of jack-bean urease by baicalin.

    Science.gov (United States)

    Tan, Lirong; Su, Jiyan; Wu, Dianwei; Yu, Xiaodan; Su, Zuqing; He, Jingjin; Wu, Xiaoli; Kong, Songzhi; Lai, Xiaoping; Lin, Ji; Su, Ziren

    2013-01-01

    Baicalin (BA) is the principal component of Radix Scutellariae responsible for its pharmacological activity. In this study, kinetics and mechanism of inhibition by BA against jack-bean urease were investigated for its therapeutic potential. It was revealed that the IC₅₀ of BA against jack-bean urease was 2.74 ± 0.51 mM, which was proved to be a competitive and concentration-dependent inhibition with slow-binding progress curves. The rapid formation of initial BA-urease complex with an inhibition constant of K(i) = 3.89 × 10⁻³ mM was followed by a slow isomerization into the final complex with an overall inhibition constant of K(i)* = 1.47 × 10⁻⁴ mM. High effectiveness of thiol protectors against BA inhibition indicated that the strategic role of the active-site sulfhydryl group of the urease was involved in the blocking process. Moreover, the inhibition of BA was proved to be reversible due to the fact that urease could be reactivated by dithiothreitol but not reactant dilution. Molecular docking assay suggested that BA made contacts with the important activating sulfhydryl group Cys-592 residues and restricted the mobility of the active-site flap. Taken together, it could be deduced that BA was a competitive inhibitor targeting thiol groups of urease in a slow-binding manner both reversibly and concentration-dependently, serving as a promising urease inhibitor for treatments on urease-related diseases.

  9. Alpha detection in pipes using an inverting membrane scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick, D.T.; Cremer, C.D.; Lowry, W. [Science and Engineering Associates, Inc., Albuquerque, NM (United States)] [and others

    1995-10-01

    Characterization of surface alpha emitting contamination inside enclosed spaces such as piping systems presents an interesting radiological measurement challenge. Detection of these alpha particles from the exterior of the pipe is impossible since the alpha particles are completely absorbed by the pipe wall. Traditional survey techniques, using hand-held instruments, simply can not be used effectively inside pipes. Science and Engineering Associates, Inc. is currently developing an enhancement to its Pipe Explorer{trademark} system that will address this challenge. The Pipe Explorer{trademark} uses a unique sensor deployment method where an inverted tubular membrane is propagated through complex pipe runs via air pressure. The inversion process causes the membrane to fold out against the pipe wall, such that no part of the membrane drags along the pipe wall. This deployment methodology has been successfully demonstrated at several DOE sites to transport specially designed beta and gamma, scintillation detectors into pipes ranging in length up to 250 ft.

  10. Pressure Change in Tee Branch Pipe in Oscillatory Flow

    Directory of Open Access Journals (Sweden)

    Daisuke Sakamoto

    2013-01-01

    Full Text Available The purpose of this paper is to contribute to the understanding of unsteady flow of branch pipes in pneumatic systems. Branch pipes are used in pneumatic pipe systems in various industrial fields. To predict the unsteady pressure changes in the pneumatic piping systems, it is necessary that the dynamic characteristics of branch pipes are at hand, in addition to the dynamic characteristic of single pipe. However, while so many studies are accumulated for a single pipe dynamics, few studies have reported the pressure changes in branch pipes due to oscillatory flow. This paper reports an experimental study on the dynamic characteristics of the pressure change in a pneumatic branch pipe under given oscillatory flow. The paper also proposes a simulation method to predict the pressure changes in a pneumatic branch pipe under oscillatory flow. The validity of simulation is verified for oscillatory flows up to 5 Hz, comparing with the experimental results.

  11. 管线偏转对GRP顶管接头影响的数值分析%Numerical Analysis for the Effect of Misalignment on GRP Jacking Pipe

    Institute of Scientific and Technical Information of China (English)

    陈建中; 李卓球

    2010-01-01

    采用三维有限元方法研究了管线偏转对GRP顶管接头的影响,得到了GRP顶管接头在管线发生偏转时的受力状况,对管道接头处的接触压力、Mises应力及其分布情况进行了分析,并对在不同偏转角情况下的最大应力进行了比较.说明了管线偏转对GRP顶管的影响非常大,由于管线偏转,管道往往会在远小于实际所能承受的顶力的情况下发生破坏,必须对最大允许偏转角度进行限定.

  12. The application of georadar in detecting defents of jacking pipe%地质雷达在顶管施工隐患检测中的应用

    Institute of Scientific and Technical Information of China (English)

    王元君; 施泽进; 杨轮凯; 杨云见; 刘宏

    2006-01-01

    顶管施工过程中会导致顶部围岩振动,产生引起地面塌陷的隐患.利用地质雷达研究引起地面塌陷隐患的位置及规模,可以有效地制定治理方案.该文介绍了地质雷达检测方法的原理及其在顶管检测方面具有分辨率高、探测结果准确、无损检测等优点.重点探讨了地质雷达应用于顶管检测数据采集处理以及图像识别,并对围岩扰动程度按三种标准划分,为顶管施工产生的隐患治理提供了科学依据.且该方法在实际工程中效果好.

  13. Survey of foliar monoterpenes across the range of jack pine reveal three widespread chemotypes: implications to host expansion of invasive mountain pine beetle

    Directory of Open Access Journals (Sweden)

    Spencer eTaft

    2015-05-01

    Full Text Available The secondary compounds of pines (Pinus can strongly affect the physiology, ecology and behaviors of the bark beetles (Coleoptera: Curculionidae, Scolytinae that feed on sub-cortical tissues of hosts. Jack pine (Pinus banksiana has a wide natural distribution range in North America (Canada and USA and thus variations in its secondary compounds, particularly monoterpenes, could affect the host expansion of invasive mountain pine beetle (Dendroctonus ponderosae, which has recently expanded its range into the novel jack pine boreal forest. We investigated monoterpene composition of 601 jack pine trees from natural and provenance forest stands representing 63 populations from Alberta to the Atlantic coast. Throughout its range, jack pine exhibited three chemotypes characterized by high proportions of α-pinene, β-pinene, or limonene. The frequency with which the α-pinene and β-pinene chemotypes occurred at individual sites was correlated to climatic variables, such as continentality and mean annual precipitation, as were the individual α-pinene and β-pinene concentrations. However, other monoterpenes were generally not correlated to climatic variables or geographic distribution. Finally, while the enantiomeric ratios of β-pinene and limonene remained constant across jack pine’s distribution, (‒:(+-α-pinene exhibited two separate trends, thereby delineating two α-pinene phenotypes, both of which occurred across jack pine’s range. These significant variations in jack pine monoterpene composition may have cascading effects on the continued eastward spread and success of D. ponderosae in the Canadian boreal forest.

  14. Visualization of working fluid flow in gravity assisted heat pipe

    OpenAIRE

    Nemec Patrik; Malcho Milan

    2015-01-01

    Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fl...

  15. Optimizing the Pipe Diameter of the Pipe Belt Conveyor Based on Discrete Element Method

    Science.gov (United States)

    Guo, Yong-cun; Wang, Shuang; Hu, Kun; Li, De-yong

    2016-03-01

    In order to increase the transport volume of the pipe belt conveyor and reduce lateral pressure of the supporting roller set, this study aims to optimize the pipe diameter of the pipe belt conveyor. A mechanical model of the pipe belt conveyor with six supporting roller sets in the belt bearing section was built based on the infinitesimal method, and the formula for calculating the lateral pressure of each supporting roller was deduced on the basis of reasonable assumption. Simulated analysis was carried out on the operation process of the pipe belt conveyor by using the discrete element method. The result showed that, when the other conditions were certain, as the pipe diameter increased, the average lateral pressure of the supporting roller set increased, with a gradually decreasing increment, which was consistent with the calculated result of the theoretical formula. An optimized pipe diameter under the current conditions was obtained by fitting the curve of the formula for calculating the transport volume of the pipe belt conveyor and its simulation curve. It provided a certain reference value for improving the transport efficiency and prolonging the service life of the pipe belt conveyor.

  16. Multi-leg heat pipe evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A. (Inventor)

    1986-01-01

    A multileg heat pipe evaporator facilitates the use and application of a monogroove heat pipe by providing an evaporation section which is compact in area and structurally more compatible with certain heat exchangers or heat input apparatus. The evaporation section of a monogroove heat pipe is formed by a series of parallel legs having a liquid and a vapor channel and a communicating capillary slot therebetween. The liquid and vapor channels and interconnecting capillary slots of the evaporating section are connected to the condensing section of the heat pipe by a manifold connecting liquid and vapor channels of the parallel evaporation section legs with the corresponding liquid and vapor channels of the condensing section.

  17. Reliability Estimation for Double Containment Piping

    Energy Technology Data Exchange (ETDEWEB)

    L. Cadwallader; T. Pinna

    2012-08-01

    Double walled or double containment piping is considered for use in the ITER international project and other next-generation fusion device designs to provide an extra barrier for tritium gas and other radioactive materials. The extra barrier improves confinement of these materials and enhances safety of the facility. This paper describes some of the design challenges in designing double containment piping systems. There is also a brief review of a few operating experiences of double walled piping used with hazardous chemicals in different industries. This paper recommends approaches for the reliability analyst to use to quantify leakage from a double containment piping system in conceptual and more advanced designs. The paper also cites quantitative data that can be used to support such reliability analyses.

  18. 75 FR 8113 - Drill Pipe From China

    Science.gov (United States)

    2010-02-23

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Drill Pipe From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject antidumping and countervailing duty investigations. DATES: Effective...

  19. Titanium Heat Pipe Thermal Plane Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thermacore Inc. proposes an innovative titanium heat pipe thermal plane for passive thermal control of individual cells within a fuel cell stack. The proposed...

  20. Titanium Heat Pipe Thermal Plane Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the Phase II program is to complete the development of the titanium heat pipe thermal plane and establish all necessary steps for production of this...

  1. Heat transfer, thermal control, and heat pipes

    Science.gov (United States)

    Olstad, W. B.

    1980-01-01

    This volume provides information on recent progress in spacecraft thermal control and the supporting disciplines of conduction, thermal radiation, and heat pipe theory and application. Four problem areas are considered: conduction heat transfer, radiation heat transfer, thermal control, and heat pipes. The topics covered include finite-element methodology for transient conduction/forced-convection thermal analysis; effects of surface finish on thermal contact resistance between different materials; mathematical models for wide-band nongray gas radiation in spherical and cylindrical geometries; thermal design, analysis and testing of the Shuttle remote manipulator arm; porous heat pipe; and transient behavior of liquid trap heat-pipe thermal diodes. Also discussed is the thermal design concept for a high-resolution UV spectrometer.

  2. Rhode Island Piping Plover Restoration Project 2002

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The recovery plan for Piping Plover on Rhode Island discusses the current status of the species, habitat requirements and limiting factors, recovery objectives and...

  3. High Energy Vibration for Gas Piping

    Science.gov (United States)

    Lee, Gary Y. H.; Chan, K. B.; Lee, Aylwin Y. S.; Jia, ShengXiang

    2017-07-01

    In September 2016, a gas compressor in offshore Sarawak has its rotor changed out. Prior to this change-out, pipe vibration study was carried-out by the project team to evaluate any potential high energy pipe vibration problems at the compressor’s existing relief valve downstream pipes due to process condition changes after rotor change out. This paper covers high frequency acoustic excitation (HFAE) vibration also known as acoustic induced vibration (AIV) study and discusses detailed methodologies as a companion to the Energy Institute Guidelines for the avoidance of vibration induced fatigue failure, which is a common industry practice to assess and mitigate for AIV induced fatigue failure. Such detailed theoretical studies can help to minimize or totally avoid physical pipe modification, leading to reduce offshore plant shutdown days to plant shutdowns only being required to accommodate gas compressor upgrades, reducing cost without compromising process safety.

  4. Heat pipes made of roll bond panels

    Science.gov (United States)

    Moeller, M.; Heil, K.

    1983-06-01

    The use of large surfaced aluminum roll bond panels with an integral flow system as heat pipes is studied. With a suitable flow system e.g., parallel passages with a cross-connection, one single filling procedure is required for the operating medium. Adequate materials for the manufacture of heat pipes are Al 99,3; AlMn1, 5 and AlMn1, 5Sil,5. Peel, creep and burst tests as well as corrosion tests were made on specimens and structural elements of these materials. Results show that the use of such panels for heat pipe manufacturing is appropriate for limited maximum temperature applications. Prototypes of heat pipes and their characteristic features are described in view of their use as absorbers in solar collectors. Good heat exchange performances obtained.

  5. Acoustics of two-phase pipe flows

    OpenAIRE

    Dijk, van, Nico M.

    2005-01-01

    Acoustic signals that are recorded in oil pipelines contain information about the flow. In order to extract this information from the pressure recordings, detailed knowledge about the transmission properties of sound waves in the pipes is required.

  6. Jet pump assisted arterial heat pipe

    Science.gov (United States)

    Bienert, W. B.; Ducao, A. S.; Trimmer, D. S.

    1978-01-01

    This paper discusses the concept of an arterial heat pipe with a capillary driven jet pump. The jet pump generates a suction which pumps vapor and noncondensible gas from the artery. The suction also forces liquid into the artery and maintains it in a primed condition. A theoretical model was developed which predicts the existence of two stable ranges. Up to a certain tilt the artery will prime by itself once a heat load is applied to the heat pipe. At higher tilts, the jet pump can maintain the artery in a primed condition but self-priming is not possible. A prototype heat pipe was tested which self-primed up to a tilt of 1.9 cm, with a heat load of 500 watts. The heat pipe continued to prime reliably when operated as a VCHP, i.e., after a large amount of noncondensible gas was introduced.

  7. Multi-leg heat pipe evaporator

    Science.gov (United States)

    Alario, J. P.; Haslett, R. A.

    1986-04-01

    A multileg heat pipe evaporator facilitates the use and application of a monogroove heat pipe by providing an evaporation section which is compact in area and structurally more compatible with certain heat exchangers or heat input apparatus. The evaporation section of a monogroove heat pipe is formed by a series of parallel legs having a liquid and a vapor channel and a communicating capillary slot therebetween. The liquid and vapor channels and interconnecting capillary slots of the evaporating section are connected to the condensing section of the heat pipe by a manifold connecting liquid and vapor channels of the parallel evaporation section legs with the corresponding liquid and vapor channels of the condensing section.

  8. Additive Manufacturing of Heat Pipe Wicks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Wick properties are often the limiting factor in a heat pipe design. Current technology uses conventional sintering of metal powders, screen wick, or grooves to...

  9. North Dakota Piping Plover Survey : 1992

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Packet of information on conducting piping plover surveys in North Dakota for 1992. These surveys are part of a cooperative effort with other resource agencies and...

  10. Heat Pipe Technology: A bibliography with abstracts

    Science.gov (United States)

    1974-01-01

    This bibliography lists 149 references with abstracts and 47 patents dealing with applications of heat pipe technology. Topics covered include: heat exchangers for heat recovery; electrical and electronic equipment cooling; temperature control of spacecraft; cryosurgery; cryogenic, cooling; nuclear reactor heat transfer; solar collectors; laser mirror cooling; laser vapor cavitites; cooling of permafrost; snow melting; thermal diodes variable conductance; artery gas venting; and venting; and gravity assisted pipes.

  11. Cooling Acoustic Transcucer with Heat Pipes

    Science.gov (United States)

    2009-07-19

    pipes. [0013] Most transducer packages involve a stack of active ceramic. A Tonpilz transducer 10 in the prior art, as depicted in FIG. 1...identical or corresponding parts throughout the several views and wherein: [0023] FIG. 1 is a prior art depiction of a Tonpilz transducer design...Distribution is unlimited 20090916027 Attorney Docket No. 97001 COOLING ACOUSTIC TRANSDUCER WITH HEAT PIPES STATEMENT OF GOVERNMENT INTEREST [0001

  12. Fire Endurance Testing of Fiberglass Piping

    Science.gov (United States)

    1992-04-01

    explosion . A computer data acquisition system was used to record the various channels of test data. Color video cameras, an infrared camera, and 35 mm...sample included a bolted flanged coupling. One of the copper-nickel samples had a brazed sleeve-type coupling and the other had a Staub mechanical...FGP of the types tested. Pipe deflections were within IACS limits. 8. An explosion hazard exists when sealed pipe samples are exposed to fire. If the

  13. IMPROVEMENT OF FLUID PIPE LUMPED PARAMETER MODEL

    Institute of Scientific and Technical Information of China (English)

    Kong Xiaowu; Wei Jianhua; Qiu Minxiu; Wu Genmao

    2004-01-01

    The traditional lumped parameter model of fluid pipe is introduced and its drawbacks are pointed out.Furthermore, two suggestions are put forward to remove these drawbacks.Firstly, the structure of equivalent circuit is modified, and then the evaluation of equivalent fluid resistance is change to take the frequency-dependent friction into account.Both simulation and experiment prove that this model is precise to characterize the dynamic behaviors of fluid in pipe.

  14. Donkey jack (Equus asinus) semen cryopreservation: studies of seminal parameters, post breeding inflammatory response, and fertility in donkey jennies.

    Science.gov (United States)

    Rota, A; Panzani, D; Sabatini, C; Camillo, F

    2012-11-01

    The aims of this study were (1) to evaluate motility parameters of donkey jack (jack; Equus asinus) semen cryopreserved in INRA-96 (INRA; IMV Technologies, France, 2% egg-yolk enriched) using either glycerol (GLY) or ethylene glycol (EG) as a cryoprotector; (2) to compare in vitro the postthaw re-extension with homologous seminal plasma (SPL) or INRA; (3) to compare fertility in donkey jennies (jennies; Equus asinus) timed artificially inseminated with jack semen cryopreserved using GLY or EG, re-extended with INRA; (4) to compare fertility in jennies timed artificially inseminated with jack semen cryopreserved using GLY re-extended with SPL, INRA, or not re-extended (NN); and (5) to describe some preliminary results of the inflammatory uterine response postbreeding. Semen from two jacks was collected and frozen in an INRA-2% egg yolk extender added of either 2.2% GLY or 1.4% EG. Postthaw motility was evaluated by a computer-assisted motility analyzer. Uterine inflammatory response and fertility were evaluated after artificial insemination (AI) of 13 jennies with frozen-thawed semen, either further extended with INRA (Group GLY-INRA, 13 cycles, and EG-INRA, 8 cycles), or with SPL (Group GLY-SPL, 13 cycles), or not re-extended (GLY-NN, 5 cycles). In each cycle, jennies were bred twice with 500 × 10(6) sperm cells (250 × 10(6) from each jack), at fixed times after induction of ovulation, and uterus was flushed at 6 and 10 h after first and second breeding, respectively. Cells in the recovered fluid were counted and distinguished as polymorphonuclear neutrophils (PMN) or other cell types. Total and progressive motility did not differ between cryoprotectants, but were higher when semen samples were re-extended in INRA, compared with SPL (P donkey semen, and that in the conditions of this study the re-extension in SPL of thawed semen before AI showed a trend toward the improvement of fertility and increased PMN concentration in uterine flushings.

  15. Development of bore tools for pipe welding and cutting

    Energy Technology Data Exchange (ETDEWEB)

    Oka, Kiyoshi; Ito, Akira; Takiguchi, Yuji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    In the International Thermonuclear Experimental Reactor (ITER), in-vessel components replacement and maintenance requires that connected cooling pipes be cut and removed beforehand and that new components be installed to which cooling pipes must be rewelded. All welding must be inspected for soundness after completion. These tasks require a new task concept for ensuring shielded areas and access from narrow ports. Thus, it became necessary to develop autonomous locomotion welding and cutting tools for branch and main pipes to weld pipes by in-pipe access; a system was proposed that cut and welded branch and main pipes after passing inside pipe curves, and elemental technologies developed. This paper introduces current development in tools for welding and cutting branch pipes and other tools for welding and cutting the main pipe. (author)

  16. Effect of Geopolymer filler in Glass Reinforced Epoxy (GRE) Pipe for Piping Application: Mechanical Properties

    Science.gov (United States)

    Firdaus Abu Hashim, Mohammad; Bakri Abdullah, Mohd Mustafa Al; Mohd Ruzaidi Ghazali, Che; Hussin, Kamarudin; Binhussain, Mohammed

    2016-06-01

    The present work is aimed to carry out the effect of geopolymer material which is fly ash as filler in the glass reinforced epoxy pipe on the micro structure of fly ash geopolymer, compression properties, and bulk density using the filament winding method. Conventional glass reinforced epoxy pipes has its own disadvantages such as high corrosion resistance at acidic environment and low strength which can be replaced by the composite pipes. Geopolymer is a type of amorphous alumino-silicate and can be synthesized by geopolymerization process. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled with 10 - 40 weight percentage geopolymer filler which is fly ash with 4 Molarity were prepared. Morphology of the raw material fly ash and fly ash based-geopolymer surface was characterized using scanning electron microscopy. It was found that the additions of fly ash at the beginning with 10 wt% are showing higher compressive strength than glass reinforced epoxy pipe without fly ash geopolymer filler. The compressive test of these series of samples was determined using Instron Universal Testing under compression mode. It was found that compressive strength for samples fly ash based-geopolymer filler are higher as compared to glass reinforced epoxy pipe without geopolymer filler. However, the compressive strength of glass reinforced epoxy pipe with fly ash geopolymer filler continues to decline when added to 20 wt% - 40 wt% of geopolymer filler loading. The results showed that the mixing of geopolymer materials in epoxy system can be obtained in this study.

  17. Effect of Glass Reinforced Epoxy (GRE pipe filled with Geopolymer Materials for Piping Application: Compression Properties

    Directory of Open Access Journals (Sweden)

    Abu Hashim Mohammad Firdaus

    2016-01-01

    Full Text Available The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were prepared by using the filament winding method. The effect of weight percentage of geopolymer materials in epoxy hardener was studied under mechanical testing, which is using the compression test. A series of glass reinforced epoxy pipe and glass reinforced epoxy pipe filled with 10 – 40 weight percentage geopolymer filler which is white clay were prepared. The compression strength of the glass reinforced epoxy pipe filled geopolymer materials is determined using Instron Universal Testing under compression mode. It was found that compressive strength for samples with white clay geopolymer filler are much higher compare to glass reinforced epoxy pipe without geopolymer filler. Moreover, the compressive strength of glass reinforced epoxy pipe filled with white clay geopolymer filler was increased from 10 wt% to 30 wt% of geopolymer content. However, the compressive strength of glass reinforced epoxy pipe with white clay geopolymer filler suddenly decreased when added to 40 wt%. The results indicated that the blending of geopolymer materials in epoxy system can be obtained in this study.

  18. Instrumented failure of hillslope models with soil-pipes

    Science.gov (United States)

    Sharma, Raj H.; Konietzky, Heinz

    2011-07-01

    Soil-pipes (porous pipes inside a hillslope) are often detected in collapsed slopes indicating their influence on slope failure processes. Only limited studies can be found regarding the impacts of soil-pipes on landslide mechanisms. Hillslope models prepared in a flume are experimented with different soil-pipe configurations: a) no pipe, b) closed pipe and c) open pipe. Pore-water pressures were measured at six different locations along a slope. Discharges at the outlet of soil-pipe and groundwater seepage were also recorded. For the above mentioned pipe configurations two types of experiments were conducted: a) rainfall-induced failure and b) seepage-induced failure. Experimental results show that a closed pipe accumulates water around its lower end and continuously increases pore-water pressure till a failure. An open pipe works as a means of hillslope drainage and reduces the pore-water pressure of an entire slope. However, if open pipe is blocked, pore-water pressure close to its lower end rises rapidly, leading to immediate soil mass movement. For both seepage and rainfall-induced failure experiments, the maximum pressure before the failure was larger at a slope with an open pipe (once it is closed) than a slope with a pipe closed from the beginning or that without a soil-pipe. This indicates that the blockage of soil-pipes makes a slope more susceptible to failure. Displacement vectors show that soil movement velocity close to the surface was highest at slopes with open pipes after closure and lowest at slopes without pipes because of a higher degree of saturation and pore-water pressure at the time of failure of the former. Before a large failure, small fluctuations in pore-water pressure were also observed which can be an indicator of impending failure.

  19. Hookah pipe smoking among health sciences students.

    Science.gov (United States)

    van der Merwe, N; Banoobhai, T; Gqweta, A; Gwala, A; Masiea, T; Misra, M; Zweigenthal, V

    2013-09-30

    Hookah pipe smoking is a social practice and has gained popularity, especially among South African youth. The extent of this practice among health sciences students, and their knowledge regarding the health risks, are unknown. This is important, as these students will become future health professionals possibly influencing the practice of individuals and communities. To explore the knowledge, attitudes and practices of hookah pipe smoking among students at the Faculty of Health Sciences, University of Cape Town. METHODS. A cross-sectional study was conducted among undergraduate and postgraduate students. A self-administered questionnaire was distributed as a hard copy and online survey. Of 228 participants, 66% had smoked a hookah pipe before, with 18% still smoking. Most began smoking in high school, with 25% initiating at university. Of the current smokers, 65% smoked occasionally socially, commonly at friends' houses for 30 - 60 min/session. A further 11% smoked cigarettes concurrently and 30% added other substances, mainly cannabis, to pipes. Most current hookah smokers had no interest in quitting (84%). Only 30% of participants had prior health information about hookah pipe smoking. Most knew that it was harmful (91%), with many not knowing why. A total of 80% of participants perceived that the practice was socially acceptable and 84% would recommend it to others.CONCLUSION; The poor knowledge about the dangers of hookah pipe smoking and the extent of its practice among health sciences students is alarming. These findings highlight the need for school and university health promotion campaigns, and for better regulation of hookah pipe smoking.

  20. Round dance in pipes; Runddans i roer

    Energy Technology Data Exchange (ETDEWEB)

    Steensen, Anders J.

    2004-07-01

    On the offshore production plants, oil, water, and gas are separated from the well streams. The oil is sold on the market while the gas is in part exported, in part reinjected into the wells in large quantities to sustain the pressure in the reservoirs. The water is cleaned, some is pumped to the sea and some returned to the reservoir. Although these processes may seem straightforward, they cause a great deal of worry since there are so many complex processing and pipe systems taking up space. Pipes vibrate and make noise, most often because of pressure fluctuations created by the flowing liquid and gas. Or vortices form inside the pipe that make the whole pipe drone. In the offshore activities, these phenomena can be very annoying; on the Statfjord B platform people baulked at entering the area where the produced water treatment system was standing. A new system had to be developed since existing equipment would take up too much space. In the new system, a pipe section is installed in the pipeline that makes the gas/liquid mixture spin rapidly as in a centrifuge. The gas collects along the centre of the pipe and is tapped off. The principle can also be used to separate liquid from gas. In many gas treatment systems, liquid accumulation, or carry over, is detrimental. But gas dehydrators are usually dimensioned for a minimal content of liquid in the gas. Important features of these new pipe-based separators are that they are small, remove bottlenecks in the production, and are straightforward to install. But operators who live with the problems every day are very sceptical about the new separators and should be given the opportunity to test them on land before they are installed in the field.

  1. Solar drying of jack fruit almonds Secagem solar de amêndoas de jaca

    Directory of Open Access Journals (Sweden)

    Alexandre J. de M Queiroz

    2011-12-01

    Full Text Available Dryers heated by solar energy have been constructed and used in drying whole and half jack fruit almonds. The samples were dried during the day in direct sun and in the conventional solar dryer prepared for this purpose. Another piece of equipment was built for reception and accumulation of sun energy in a body of water, which was used as a heat source for night drying. The drying with the sun energy was compared with artificial drying. The jack fruit almonds were dried whole, half, with pellicle and without it. The storage of solar energy in water was technically viable for use in night drying. The drying by combining solar dryers in the day and night periods were completed in approximately 35 hours, and were equivalent to artificial drying between 40ºC and 70ºC. Almond cut in half and the pellicle removed reduced the drying time.Secadores com aquecimento por energia solar foram construídos e utilizados em secagens de amêndoas de jaca inteiras e em metades. As secagens no período diurno foram realizadas por exposição direta ao sol e em secador solar convencional, elaborado para este fim. Construiu-se também um equipamento para captação e acumulação de energia solar em uma massa de água, a qual foi utilizada como fonte de calor para realização de secagens no período noturno. As secagens com o uso de energia solar foram comparadas com secagens artificiais. As amêndoas de jaca foram secadas inteiras, em metades, com e sem película. O armazenamento da energia solar em corpo de água mostrou-se viável do ponto de vista técnico para utilização em secagens noturnas. As secagens combinando secadores por energia solar nos períodos diurno e noturno foram concluídas em tempos aproximados de 35 horas e equivaleram a secagens artificiais entre 40 ºC e 70 ºC. O corte das amêndoas e a retirada das películas reduziram o tempo de secagem.

  2. Antimicrobial and Antioxidative Activities of Bioactive Constituents from Hydnophytum formicarum Jack.

    Directory of Open Access Journals (Sweden)

    Virapong Prachayasittikul

    2008-04-01

    Full Text Available Hydnophytum formicarum Jack. (Rubiaceae is a medicinal plant whose tuberspossesses cardiovascular, anti-inflammatory and antiparasitic effects and have been usedfor the treatment of hepatitis, rheumatism and diarrhea. Herein we report the isolation of itsactive constituents and the testing of their antimicrobial activity against 27 strains ofmicroorganisms using an agar dilution method and of their antioxidative activity using theDPPH and SOD assays. The results show that the crude hexane, dichloromethane, ethylacetate and methanol extracts exert such activities. Particularly, the crude ethyl acetateextract exhibits antigrowth activity against many Gram-positive and Gram-negativebacteria with MIC 256 μg/mL. Shewanella putrefaciens ATCC 8671 is completelyinhibited at a lower MIC (128 μg/mL. Interestingly, Corynebacterium diphtheriae NCTC10356 is inhibited by all the tested extracts. Significantly, the ethyl acetate extract is alsothe most potent antioxidant, showing 83.31% radical scavenging activity with IC50 8.40μg/mL in the DPPH assay. The other extracts display weak to moderate antioxidativeMolecules 2008, 13905activities, ranging from 28.60-56.80% radical scavenging. The SOD assay shows thatmethanol extract exhibits the highest activity (74.19% inhibition of superoxide radical.The dichloromethane and ethyl acetate extracts display comparable SOD activity. Thepromising bioactivities of the crude ethyl acetate extract guided the first isolation ofbioactive flavonoid and phenolic compounds: isoliquiritigenin (2, protocatechualdehyde(3, butin (4 and butein (5 from this species. Their structures have been fully establishedby 1D and 2D NMR. In addition, stigmasterol was isolated from the crude hexane anddichloromethane extracts. The antimicrobial and cytotoxic activities of compounds 3-5were evaluated. The tested compounds were inactive against HuCCA-1 and KB cell lines,showing ED50> 10 μg/mL. Protocatechualdehyde (3

  3. Multiple blowdown pipe experiments with the PPOOLEX facility

    Energy Technology Data Exchange (ETDEWEB)

    Puustinen, M.; Laine, J.; Raesaenen, A. (Lappeenranta Univ. of Technology, Nuclear Safety Research Unit (Finland))

    2011-03-15

    This report summarizes the results of the experiments with two steel blowdown pipes carried out with the scaled down PPOOLEX test facility designed and constructed at Lappeenranta University of Technology. Steam was blown into the dry well compartment and from there through the blowdown pipes to the condensation pool. The main purpose of the experiment series was to study chugging phenomena (rapid condensation) while steam is discharged through two parallel blowdown pipes into the condensation pool filled with sub-cooled water. Particularly, the aim was to study if the pipe material (polycarbonate) used in the earlier experiment series with two blowdown pipes has had an effect on the general chugging behaviour and measured loads. In the experiments the initial temperature of the pool water was 20 deg. C. The steam flow rate ranged from 220 g/s to 2 350 g/s and the temperature of incoming steam from 148 deg. C to 207 deg. C. The formation and collapse of steam bubbles and the movement of the steam/water interface inside the pipes was non-synchronous. There could be even a 70 ms time difference between the occurrences of steam bubble collapses at the outlets of the two pipes. There was no clear pattern in which pipe the steam bubble first starts to collapse. Several successive bubbles could collapse first in either pipe but then the order changed for a single or several cycles. High pressure loads were measured inside the blowdown pipes due to rapid condensation of the steam volumes in the pipes and resulting water hammer effects. The loads seemed to be higher in pipe 1 than in pipe 2. An explanation for this could be a possible unequal distribution of steam flow between the two pipes. The pipe material has an effect on the condensation phenomena inside the blowdown pipes. A huge difference in the measured pressure curves inside the pipes could be observed compared to the experiments with the polycarbonate pipes. With the same test conditions the amplitude of the

  4. Visualization of working fluid flow in gravity assisted heat pipe

    Directory of Open Access Journals (Sweden)

    Nemec Patrik

    2015-01-01

    Full Text Available Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fluid boiling, nucleation of bubbles, vapor flow, vapor condensation on the wall, vapor and condensate flow interaction, flow down condensate film thickness on the wall, occurred during the heat pipe operation.

  5. Visualization of working fluid flow in gravity assisted heat pipe

    Science.gov (United States)

    Nemec, Patrik; Malcho, Milan

    2015-05-01

    Heat pipe is device working with phase changes of working fluid inside hermetically closed pipe at specific pressure. The phase changes of working fluid from fluid to vapor and vice versa help heat pipe to transport high heat flux. The article deal about construction and processes casing in heat pipe during operation. Experiment visualization of working fluid flow is performed with glass heat pipe filed with ethanol. The visualization of working fluid flow explains the phenomena as working fluid boiling, nucleation of bubbles, vapor flow, vapor condensation on the wall, vapor and condensate flow interaction, flow down condensate film thickness on the wall, occurred during the heat pipe operation.

  6. Performance characteristic of thermosyphon heat pipe at radiant heat source

    Science.gov (United States)

    Hrabovský, Peter; Papučík, Štefan; Kaduchová, Katarína

    2016-06-01

    This article discusses about device, which is called heat pipe. This device is with heat source with radiant heat source. Heat pipe is device with high efficiency of heat transfer. The heat pipe, which is describe in this article is termosyphon heat pipe. The experiment with termosyphon heat pipe get a result. On the base of result, it will be in future to create mathematical model in Ansys. Thermosyphon heat pipe is made of copper and distilled water is working fluid. The significance of this experiment consists in getting of the heat transfer and performance characteristic. On the basis of measured and calculated data can be constructed the plots.

  7. Comparison of lodgepole and jack pine resin chemistry: implications for range expansion by the mountain pine beetle, Dendroctonus ponderosae (Coleoptera: Curculionidae).

    Science.gov (United States)

    Clark, Erin L; Pitt, Caitlin; Carroll, Allan L; Lindgren, B Staffan; Huber, Dezene P W

    2014-01-01

    The mountain pine beetle, Dendroctonus ponderosae, is a significant pest of lodgepole pine in British Columbia (BC), where it has recently reached an unprecedented outbreak level. Although it is native to western North America, the beetle can now be viewed as a native invasive because for the first time in recorded history it has begun to reproduce in native jack pine stands within the North American boreal forest. The ability of jack pine trees to defend themselves against mass attack and their suitability for brood success will play a major role in the success of this insect in a putatively new geographic range and host. Lodgepole and jack pine were sampled along a transect extending from the beetle's historic range (central BC) to the newly invaded area east of the Rocky Mountains in north-central Alberta (AB) in Canada for constitutive phloem resin terpene levels. In addition, two populations of lodgepole pine (BC) and one population of jack pine (AB) were sampled for levels of induced phloem terpenes. Phloem resin terpenes were identified and quantified using gas chromatography. Significant differences were found in constitutive levels of terpenes between the two species of pine. Constitutive α-pinene levels - a precursor in the biosynthesis of components of the aggregation and antiaggregation pheromones of mountain pine beetle - were significantly higher in jack pine. However, lower constitutive levels of compounds known to be toxic to bark beetles, e.g., 3-carene, in jack pine suggests that this species could be poorly defended. Differences in wounding-induced responses for phloem accumulation of five major terpenes were found between the two populations of lodgepole pine and between lodgepole and jack pine. The mountain pine beetle will face a different constitutive and induced phloem resin terpene environment when locating and colonizing jack pine in its new geographic range, and this may play a significant role in the ability of the insect to persist in

  8. Comparison of lodgepole and jack pine resin chemistry: implications for range expansion by the mountain pine beetle, Dendroctonus ponderosae (Coleoptera: Curculionidae

    Directory of Open Access Journals (Sweden)

    Erin L. Clark

    2014-02-01

    Full Text Available The mountain pine beetle, Dendroctonus ponderosae, is a significant pest of lodgepole pine in British Columbia (BC, where it has recently reached an unprecedented outbreak level. Although it is native to western North America, the beetle can now be viewed as a native invasive because for the first time in recorded history it has begun to reproduce in native jack pine stands within the North American boreal forest. The ability of jack pine trees to defend themselves against mass attack and their suitability for brood success will play a major role in the success of this insect in a putatively new geographic range and host. Lodgepole and jack pine were sampled along a transect extending from the beetle’s historic range (central BC to the newly invaded area east of the Rocky Mountains in north-central Alberta (AB in Canada for constitutive phloem resin terpene levels. In addition, two populations of lodgepole pine (BC and one population of jack pine (AB were sampled for levels of induced phloem terpenes. Phloem resin terpenes were identified and quantified using gas chromatography. Significant differences were found in constitutive levels of terpenes between the two species of pine. Constitutive α-pinene levels – a precursor in the biosynthesis of components of the aggregation and antiaggregation pheromones of mountain pine beetle – were significantly higher in jack pine. However, lower constitutive levels of compounds known to be toxic to bark beetles, e.g., 3-carene, in jack pine suggests that this species could be poorly defended. Differences in wounding-induced responses for phloem accumulation of five major terpenes were found between the two populations of lodgepole pine and between lodgepole and jack pine. The mountain pine beetle will face a different constitutive and induced phloem resin terpene environment when locating and colonizing jack pine in its new geographic range, and this may play a significant role in the ability of the

  9. Physical and Chemical Characterization Of Greater Yam (Dioscorea Alata) And Jack Bean (Canavalia Ensiformis) - Based Composite Flour

    Science.gov (United States)

    Affandi, D. R.; Praseptiangga, D.; Nirmala, F. S.; Sigit Amanto, B.; Atmaka, W.

    2017-04-01

    Indonesia is a tropical country that has great potential in agriculture. Tubers and legumes as examples of the potential commodities are needed to be more developed. Flour production is one of the best alternatives to be chosen as the downstream stage of the tubers and legumes utilization. Greater yam (Dioscorea alata) and jack bean (Canavalia ensiformis) were used in this study. This study was conducted to determine best formula of composite flour based on physical, chemical, and functional characterization of composite flour produced. Variations of formula used was the ratio of greater yam flour and jack bean flour, which were 85:15 (F1), 70:30 (F2), 55:45 (F3), respectively, and this study was conducted using completely randomized design (CRD). The formula variations didn’t show any significant effect on the water absorption capability, water holding capacity (WHC), oil holding capacity (OHC), swelling power, and starch content of the composite flour. However, the formula variations had a significant influence on the colour, proximate parameters, amylose and amylopectin content, resistant starch content, dietary fibre, total phenol, and antioxidant activity of the composite flour produced. Considering the results of physical, chemical, and functional characteristics of composite flour, formula (F1) was selected as the best composite flour developed from greater yam and jack bean flours.

  10. Fire Regime in Marginal Jack Pine Populations at Their Southern Limit of Distribution, Riding Mountain National Park, Central Canada

    Directory of Open Access Journals (Sweden)

    Jacques C. Tardif

    2016-09-01

    Full Text Available In central Canada, long fire history reconstructions are rare. In a context where both anthropogenic and climate influences on fire regime have changed, Parks Canada has a mandate to maintain ecological integrity. Here we present a fire history derived from fire-scarred jack pine (Pinus banksiana Lamb. trees growing at their southern distribution limit in Riding Mountain National Park (RMNP. In Lake Katherine Fire Management Unit (LKFMU, a subregion within the park, fire history was reconstructed from archival records, tree-ring records, and charcoal in lake sediment. From about 1450 to 1850 common era (CE the fire return intervals varied from 37 to 125 years, according to models. During the period 1864–1930 the study area burned frequently (Weibull Mean Fire Intervals between 2.66 and 5.62 years; this period coincided with the end of First Nations occupation and the start of European settlement. Major recruitment pulses were associated with the stand-replacing 1864 and 1894 fires. This period nevertheless corresponded to a reduction in charcoal accumulation. The current fire-free period in LKFMU (1930–today coincides with RMNP establishment, exclusion of First Nations land use and increased fire suppression. Charcoal accumulation further decreased during this period. In the absence of fire, jack pine exclusion in LKFMU is foreseeable and the use of prescribed burning is advocated to conserve this protected jack pine ecosystem, at the southern margins of its range, and in the face of potential climate change.

  11. LAMINAR FLUID FLOW IN HELICAL ELLIPTICAL PIPE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this paper, using an orthogonal curvilinear coordinate system and solving the complete N-S equations, we analyzed the flow in a helical elliptical duct by the perturbation method. The first-order solutions of the stream function Ψ, axial velocity w and the velocity of secondary flow (u, v) were obtained. The effects of torsion, curvature and the axial pressure gradient on the secondary flow were discussed in detail. The study indicates that the torsion has first-order effect on the secondary flow in a helical elliptical pipe, the secondary flow is dominated by torsion when the axial pressure gradient is small and for increasing gradient the secondary flow is eventually dominated by the effect due to curvature. The fact that the torsion has no effect on fluid flow in a helical pipe with a circular cross section was also confirmed. The most important conclusion is that the flow in a helical elliptical pipe to the first-order can be obtained as a combination of the flow in a toroidal pipe and the flow in a twisted pipe.

  12. GTRAN- TRANSIENT ANALYSIS OF GAS PIPING SYSTEMS

    Science.gov (United States)

    TROVILLION T A

    1994-01-01

    The GTRAN program was developed to solve transient, as well as steady state, problems for gas piping systems. GTRAN capabilities allow for the analysis of a variety of system configurations and components. These include: multiple pipe junctions; valves that change position with time; fixed restrictions (orifices, manual valves, filters, etc.); relief valves; constant pressure sources; and heat transfer for insulated piping and piping subjected to free or forced convection. In addition, boundary conditions can be incorporated to simulate specific components. The governing equations of GTRAN are the one-dimensional transient gas dynamic equations. The three equations for pressure, velocity, and density are reduced to numerical equations using an implicit Crank-Nicholson finite difference technique. Input to GTRAN includes a description of the piping network, the initial conditions, and any events (e.g. valve closings) occuring during the period of analysis. Output includes pressure, velocity, and density versus time. GTRAN is written in FORTRAN 77 for batch execution and has been implemented on a DEC VAX series computer. GTRAN was developed in 1983.

  13. Drag reduction properties of superhydrophobic mesh pipes

    Science.gov (United States)

    Geraldi, Nicasio R.; Dodd, Linzi E.; Xu, Ben B.; Wells, Gary G.; Wood, David; Newton, Michael I.; McHale, Glen

    2017-09-01

    Even with the recent extensive study into superhydrophobic surfaces, the fabrication of such surfaces on the inside walls of a pipe remains challenging. In this work we report a convenient bi-layered pipe design using a thin superhydrophobic metallic mesh formed into a tube, supported inside another pipe. A flow system was constructed to test the fabricated bi-layer pipeline, which allowed for different constant flow rates of water to be passed through the pipe, whilst the differential pressure was measured, from which the drag coefficient (ƒ) and Reynolds numbers (Re) were calculated. Expected values of ƒ were found for smooth glass pipes for the Reynolds number (Re) range 750-10 000, in both the laminar and part of the turbulent regimes. Flow through plain meshes without the superhydrophobic coating were also measured over a similar range (750  superhydrophobic coating, ƒ was found for 4000  superhydrophobic mesh can support a plastron and provide a drag reduction compared to a plain mesh, however, the plastron is progressively destroyed with use and in particular at higher flow rates.

  14. Characterizing the Performance of Pipe Bombs.

    Science.gov (United States)

    Oxley, Jimmie C; Smith, James L; Bernier, Evan T; Sandstrom, Fredrick; Weiss, Gregory G; Recht, Gunther W; Schatzer, David

    2017-05-24

    Pipe bombs of steel or PVC fragment in reproducible patterns when similarly configured. The power of the explosion correlates with number, mass, and size of the fragments recovered, where a large number of small, low-mass fragments indicate a high-power event and vice versa. In discussing performance, describing pipe fragmentation pattern by fragment weight distribution mapping (FWDM) or fragment surface area distribution mapping (FSADM) was useful. When fillers detonated, detonation velocities of ~4.4 mm/μs were measured. In such cases, side walls of the pipe were thrown first; the average fragment velocity was ~1000 km/s. In deflagrations, the end cap was first thrown; fragment velocities were only ~240 km/s. Blast overpressures varied; at 10 feet, 2 × 12 inch steel pipes containing ~550 g of detonable mixture produced overpressures of 5-6 psi; similar nondetonating pipes produced less than 2 psi. Maximum fragment throw distances were 250-300 m, with an average of ~100 m. © 2017 American Academy of Forensic Sciences.

  15. A study on the transient piping vibration of power plant. Secondary piping system of Wolsung 1 unit

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun; Kim, Yeon Whan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

    1996-08-01

    In order to maintain a safe operation and availability of generating facilities, qualitative and quantitative assessment of piping vibration was performed vibration sources and damages of piping support was identified on the second piping system of Wolsung nuclear power plant unit 1 .Inspected piping supports and structures in both hot and cold condition .Established evaluation procedures of piping vibration .Performed the static analysis of 2 nd piping system .Established optimal vibration reducing method .The measured vibration level after installing rigid supports and energy absorbing type restraint was reduced about 7 times in velocity unit (author). 24 refs., 95 figs.

  16. Immune-mediated thrombocytopenia associated with angiostrongylus vasorum infection in a jack russell terrier

    Directory of Open Access Journals (Sweden)

    JO'Neill Emma

    2010-07-01

    Full Text Available Abstract A twenty-month-old Jack Russell terrier was presented with a four-day history of thrombocytopenia, echymotic inguinal haemorrhages, coughing and reduced exercise tolerance. Clinical examination revealed several petechial haemorrhages on the gingivae and small echymotic haemorrhages in the inguinal region, along with mild bilateral epistaxis. Haematology confirmed a platelet count of 1.0 × 10/L. Thoracic radiographs revealed a wide-spread mixed alveolar-interstitial lung pattern, apparent throughout the entire lungfield, but particularly marked within the left lung lobes. A presumptive diagnosis of immune-mediated thrombocytopenia was made and the dog was treated with vincristine and immunosuppressive doses of prednisolone. Initially anaemia developed following gastrointestinal haemorrhage; however, after symptomatic treatment the dog showed a marked clinical improvement. Evaluation for an underlying cause of the disease revealed Angiostrongylus vasorum L1 larvae on faecal analysis and treatment with fenbendazole was commenced. The dog made a full clinical recovery with all treatment was withdrawn within five weeks of diagnosis. This is the second report of immune-mediated thrombocytopenia associated with Angiostrongylus vasorum infection and it is the first to be successfully managed. The report highlights that Angiostrongylus vasorum should be considered in young dogs presented with thrombocytopenia.

  17. Supramolecular-jack-like guest in ultramicroporous crystal for exceptional thermal expansion behaviour.

    Science.gov (United States)

    Zhou, Hao-Long; Zhang, Yue-Biao; Zhang, Jie-Peng; Chen, Xiao-Ming

    2015-04-21

    The dynamic behaviours of host frameworks and guest molecules have received much attention for their great relevance with smart materials, but little has been developed to control or understand the host-guest interplay. Here we show that the confined guest can utilize not only molecular static effects but also bulk dynamic properties to control the host dynamics. By virtue of the three-dimensional hinge-like framework and quasi-discrete ultramicropores, a flexible porous coordination polymer exhibits not only drastic guest-modulation effect of the thermal expansion magnitude (up to 422 × 10(-6) K(-1)) and even the anisotropy but also records positive/negative thermal expansion coefficients of +482/-218 × 10(-6) K(-1). Moreover, single-crystal X-ray diffraction analyses demonstrate that the jack-like motion of the guest supramolecular dimers, being analogous to the anisotropic thermal expansion of bulk van der Waals solids, is crucial for changing the flexibility mode and thermal expansion behaviour of the crystal.

  18. Supramolecular-jack-like guest in ultramicroporous crystal for exceptional thermal expansion behaviour

    Science.gov (United States)

    Zhou, Hao-Long; Zhang, Yue-Biao; Zhang, Jie-Peng; Chen, Xiao-Ming

    2015-04-01

    The dynamic behaviours of host frameworks and guest molecules have received much attention for their great relevance with smart materials, but little has been developed to control or understand the host-guest interplay. Here we show that the confined guest can utilize not only molecular static effects but also bulk dynamic properties to control the host dynamics. By virtue of the three-dimensional hinge-like framework and quasi-discrete ultramicropores, a flexible porous coordination polymer exhibits not only drastic guest-modulation effect of the thermal expansion magnitude (up to 422 × 10-6 K-1) and even the anisotropy but also records positive/negative thermal expansion coefficients of +482/-218 × 10-6 K-1. Moreover, single-crystal X-ray diffraction analyses demonstrate that the jack-like motion of the guest supramolecular dimers, being analogous to the anisotropic thermal expansion of bulk van der Waals solids, is crucial for changing the flexibility mode and thermal expansion behaviour of the crystal.

  19. Non-reef environments impact the diversification of extant jacks, remoras and allies (Carangoidei, Percomorpha).

    Science.gov (United States)

    Frédérich, Bruno; Marramà, Giuseppe; Carnevale, Giorgio; Santini, Francesco

    2016-11-16

    Various factors may impact the processes of diversification of a clade. In the marine realm, it has been shown that coral reef environments have promoted diversification in various fish groups. With the exception of requiem sharks, all the groups showing a higher level of diversity in reefs than in non-reef habitats have diets based predominantly on plankton, algae or benthic invertebrates. Here we explore the pattern of diversification of carangoid fishes, a clade that includes numerous piscivorous species (e.g. trevallies, jacks and dolphinfishes), using time-calibrated phylogenies as well as ecological and morphological data from both extant and fossil species. The study of carangoid morphospace suggests that reef environments played a role in their early radiation during the Eocene. However, contrary to the hypothesis of a reef-association-promoting effect, we show that habitat shifts to non-reef environments have increased the rates of morphological diversification (i.e. size and body shape) in extant carangoids. Piscivory did not have a major impact on the tempo of diversification of this group. Through the ecological radiation of carangoid fishes, we demonstrate that non-reef environments may sustain and promote processes of diversification of different marine fish groups, at least those including a large proportion of piscivorous species. © 2016 The Author(s).

  20. Multi-step analysis of Hg2+ ion inhibition of jack bean urease.

    Science.gov (United States)

    Krajewska, Barbara; Zaborska, Wiesława; Chudy, Michał

    2004-06-01

    We performed a multi-step analysis of the inhibition of jack bean urease by Hg(2+) ions that included residual activity measurements after incubation of the enzyme with the metal ion, reactivation of Hg(2+)-inhibited urease, protection of urease with thiol reagents prior to incubation with Hg(2+), progress curve analysis, and spectroscopic assay of thiol groups in urease-Hg(2+) complexes with a cysteine selective agent 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB). Hg(2+) ions were found to form stable complexes with urease that could rapidly be reversed only by the treatment with dithiotreitol, and not by dilution or dialysis. The residual activity data interpreted in terms of the Hill equation revealed the multisite Hg(2+) inhibition of urease, and along with the DTNB thiol-assay they demonstrated the involvement in the reaction with Hg(2+) of six cysteine residues per enzyme subunit, including the active-site flap cysteine. The molar ratios of the inhibitor and enzyme imply that the inhibition consists of the formation of RSHgX complexes, X being a water molecule or an anion. The time-dependent Hg(2+) inhibitory action on urease determined in the system without enzyme preincubation was best described by slow-binding mechanism with the steady-state inhibition constant K(i) = 1.9 nM (+/-10%).

  1. The evolution of large scale dense gas clouds at Jack Rabbit

    Science.gov (United States)

    Huq, Pablo; Spicer, Tom

    2014-11-01

    Typically ammonia and chlorine are stored or transported as pressurized liquefied gas. There have been many accidents involving storage tanks and also accidents during transport. There is a need for accurate evaluation of the hazards associated with accidental releases of ammonia and chlorine which typically result in denser than air clouds which are toxic. The dense gas cloud slumps under the action of gravity into a thin layer with stable density gradients which suppress ambient atmospheric turbulence, and so complicating the physics of mixing. We present similarity analyses of one and two ton experimental releases of ammonia and chlorine at Jack Rabbit. Similarity analysis discriminates inertia-buoyancy and viscous-buoyancy regimes. Sequences of visualizations are used to determine propagation speeds of dense clouds. There is good agreement between observed speeds and the predictions of similarity analysis of the propagation of radial, dense gas clouds. Finally, comparison of one ton with two ton releases for both ammonia and chlorine lead to insights on scaling which are likely to be useful in the design of even larger scale experiments on dense gas clouds arising from similar configurations.

  2. Exophiala xenobiotica infection in cultured striped jack, Pseudocaranx dentex (Bloch & Schneider), in Japan.

    Science.gov (United States)

    Munchan, C; Kurata, O; Wada, S; Hatai, K; Sano, A; Kamei, K; Nakaoka, N

    2009-10-01

    This report describes Exophiala infection in cultured striped jack, Pseudocaranx dentex, in Japan in 2005. One hundred out of 35,000 fish died per day and mortalities continued for 1 month. Diseased fish showed swelling of the abdomen and kidney distension. Numerous septate hyphae, pale brown in colour, were seen in kidney in squash preparations. Histology revealed abundant fungal hyphae and conidia in gill, heart and kidney. Fungal hyphae were accompanied by cell necrosis and influx of inflammatory, mainly mononuclear cells. The fungus isolated from the diseased fish had septate hyphae, pale brown in colour and 1.8-3.0 microm in diameter. Conidiogenous cells were conspicuous annellides, short or cylindrical or fusiform in shape. Conidia were one-celled, ellipsoidal with smooth walls, accumulated in balls at the apices of annellides that tended to slide down, 1.5-2.0 microm in width and 3.0-5.0 microm in length. The fungus was classified into the genus Exophiala based on its morphology and as Exophiala xenobiotica based on the sequences of the ITS 1-5.8S-ITS 2 regions of rDNA. This is the first record of this fungus in a marine fish.

  3. Variations in otolith patterns, sizes and body morphometrics of jack mackerel Trachurus japonicus juveniles.

    Science.gov (United States)

    Kanaji, Y; Kishida, M; Watanabe, Y; Kawamura, T; Xie, S; Yamashita, Y; Sassa, C; Tsukamoto, Y

    2010-10-01

    Variations in otolith patterns, sizes and body morphometrics of jack mackerel Trachurus japonicus juveniles were investigated. Under transmitted light, translucent (W(t)) and opaque otoliths (W(o)) were detected in juveniles collected from Wakasa Bay between July 2005 and April 2006, whereas only opaque otoliths (G(o)) were detected in Goto-nada Sea individuals between May and June 2006. Three groups of juveniles were distinguished based on differences in hatch season, otolith size and growth history, and body morphometrics. As T. japonicus has different spawning seasons according to spawning grounds, each group was estimated to hatch in different waters. Juveniles with W(t) otoliths were considered to have stayed in coastal habitat longer, as the hatch area was estimated to be near Wakasa Bay. Juveniles with W(o) and G(o) otoliths appear to recruit to coastal waters at larger size, since their hatch areas were estimated to be far from each collection area. Larger otoliths of W(t) were attributed to otolith accretion after the second growth flexion, which was observed only for W(t) . Standard length of W(t) fish at the second otolith growth flexion was estimated to correspond to recruitment size to coastal rocky reefs in Wakasa Bay. Body morphometrics were correlated with otolith size after removing body size effect, suggesting that morphological variations of T. japonicus juveniles were also associated with the timing of recruitment to coastal habitat.

  4. A CHRNE frameshift mutation causes congenital myasthenic syndrome in young Jack Russell Terriers.

    Science.gov (United States)

    Rinz, Caitlin J; Lennon, Vanda A; James, Fiona; Thoreson, James B; Tsai, Kate L; Starr-Moss, Alison N; Humphries, H Dale; Guo, Ling T; Palmer, Anthony C; Clark, Leigh Anne; Shelton, G Diane

    2015-12-01

    Congenital myasthenic syndromes (CMSs) are a group of rare genetic disorders of the neuromuscular junction resulting in structural or functional causes of fatigable weakness that usually begins early in life. Mutations in pre-synaptic, synaptic and post-synaptic proteins have been demonstrated in human cases, with more than half involving aberrations in nicotinic acetylcholine receptor (AChR) subunits. CMS was first recognized in dogs in 1974 as an autosomal recessive trait in Jack Russell Terriers (JRTs). A deficiency of junctional AChRs was demonstrated. Here we characterize a CMS in 2 contemporary cases of JRT littermates with classic clinical and electromyographic findings, and immunochemical confirmation of an approximately 90% reduction in AChR protein content. Loci encoding the 5 AChR subunits were evaluated using microsatellite markers, and CHRNB1 and CHRNE were identified as candidate genes. Sequences of the splice sites and exons of both genes revealed a single base insertion in exon 7 of CHRNE that predicts a frameshift mutation and a premature stop codon. We further demonstrated this pathogenic mutation in CHRNE in archival tissues from unrelated JRTs studied 34 years ago.

  5. Central and peripheral neurotoxicity induced by the Jack Bean Urease (JBU) in Nauphoeta cinerea cockroaches.

    Science.gov (United States)

    Carrazoni, Thiago; de Avila Heberle, Marines; Perin, Ana Paula Artusi; Zanatta, Ana Paula; Rodrigues, Polyana Veloso; Dos Santos, Fabiola Duarte Machado; de Almeida, Carlos Gabriel Moreira; Vaz Breda, Ricardo; Dos Santos, Douglas Silva; Pinto, Paulo Marcos; da Costa, Jaderson Costa; Carlini, Celia Regina; Dal Belo, Cháriston André

    2016-08-10

    Ureases of Canavalia ensiformis are natural insecticides with a still elusive entomotoxic mode of action. We have investigated the mechanisms involved in the neurotoxicity induced by Jack Bean Urease (JBU) in Nauphoeta cinerea (Olivier). To carry out this study we have employed biochemical and neurophysiological analysis of different cockroach organ systems. The injection of the insects with JBU (0.75-6μg/g animal), although not lethal within 24h, caused significant inhibition of the brain acetylcholinesterase activity (60±5%, pcockroaches (pcockroaches, an effect prevented by bicuculline (5μg/g) (pcockroaches probably by interfering with the cholinergic neurotransmission. The neuromuscular blocking activity of JBU suggests an interplay between acetylcholine and GABA signaling. The search for novel natural molecules with insecticide potential has become a necessity more than an alternative. Understanding the mode of action of candidate molecules is a crucial step towards the development of new bioinsecticides. The present study focused on the neurotoxicity of Canavalia ensiformis urease, a natural insecticide, in cockroaches and revealed interferences on the cholinergic, octopaminergic and GABA-ergic pathways as part of its entomotoxic mode of action. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  6. Immune-mediated thrombocytopenia associated with angiostrongylus vasorum infection in a Jack Russell terrier.

    Science.gov (United States)

    Jo'neill, Emma; Acke, Els; Tobin, Emma; McCarthy, Grainne

    2010-07-01

    A twenty-month-old Jack Russell terrier was presented with a four-day history of thrombocytopenia, echymotic inguinal haemorrhages, coughing and reduced exercise tolerance. Clinical examination revealed several petechial haemorrhages on the gingivae and small echymotic haemorrhages in the inguinal region, along with mild bilateral epistaxis. Haematology confirmed a platelet count of 1.0 × 10/L. Thoracic radiographs revealed a wide-spread mixed alveolar-interstitial lung pattern, apparent throughout the entire lungfield, but particularly marked within the left lung lobes. A presumptive diagnosis of immune-mediated thrombocytopenia was made and the dog was treated with vincristine and immunosuppressive doses of prednisolone. Initially anaemia developed following gastrointestinal haemorrhage; however, after symptomatic treatment the dog showed a marked clinical improvement. Evaluation for an underlying cause of the disease revealed Angiostrongylus vasorum L1 larvae on faecal analysis and treatment with fenbendazole was commenced. The dog made a full clinical recovery with all treatment was withdrawn within five weeks of diagnosis. This is the second report of immune-mediated thrombocytopenia associated with Angiostrongylus vasorum infection and it is the first to be successfully managed. The report highlights that Angiostrongylus vasorum should be considered in young dogs presented with thrombocytopenia.

  7. 砂性土中钢筒混凝土管顶管施工技术%Construction Technology of Pipe-Jacking for Prestressed Concrete Cylinder Pipe( PCCP ) through Sandy-Soil Stratum

    Institute of Scientific and Technical Information of China (English)

    李耀良; 赵敏杰; 张璐璐; 王建华

    2007-01-01

    杭州市七格污水处理厂二期进厂总管工程钢筒混凝土管顶管所处的地层为砂质粉土,顶进时侧壁摩阻力较大,而且钢筒混凝土管在顶进施工中的允许转角只有0.59°,对测量和施工纠偏技术要求较高.为保证施工质量和进度,施工采取了一系列技术措施,如针对砂性土的环向注浆技术、注浆压力的控制技术和钢筒混凝土管的纠偏控制等,有效地保证了钢筒混凝土管顶管在砂性土中施工的工程质量和进度.

  8. 玻璃钢夹砂管顶管施工监测与分析%Monitoring and Analysis of Pipe-Jacking Construction of Sand Sandwiched GRP Pipe

    Institute of Scientific and Technical Information of China (English)

    严国仙; 蒯军华; 张璐璐; 王建华

    2007-01-01

    以温州市江滨东路污水管工程为实例,介绍了玻璃铜夹砂管在顶管工程中的应用.通过现场监测数据的分析,研究了顶力随顶进距离变化、顶管施工时沿管线方向的地表沉降以及纠偏测量的顶管水平和高程偏差.讨论了注浆对顶力的影响以及顶管施工对周围环境的影响.

  9. Key results for the NRC`s Short Cracks in Piping and Piping Welds Research Program

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Krishnaswamy, P.; Brust, F. [Battelle, Columbus, OH (United States)] [and others

    1995-04-01

    The overall objective of the Short Cracks in Piping and Piping Welds Program is to verify and improve engineering analyses to predict the fracture behavior of circumferentially cracked pipe under quasi-static loading with particular attention to crack lengths typically used in LBB or flaw evaluation criteria. The USNCRC program at Battelle was initiated in March 1990 and is scheduled to be completed in December 1994. This paper discusses key results from the overall program with particular emphasis on the efforts since the last WRSIM meeting. The program consists of eight technical tasks as listed below: task 1 short through-wall-cracked (TWC) pipe evaluations; task 2 short surface-cracked (SC) pipe evaluations; task 3 bi-metallic weld crack evaluations; task 4 dynamic strain aging and crack instabilities; task 5 fracture evaluations of anisotropic pipe; task 6 crack-opening-area evaluations; task 7 NRCPIPE code improvements; task 8 additional efforts. Task 8 is a collection of new efforts initiated during the coarse of the program. A list of the full-scale pipe experiments in this program is given in Table 1. All of the experiments have been completed. The most recent accomplishments in each of the tasks listed above are discussed below. The details of all the results in the eight tasks are published in the semiannual reports as well as topical reports from the program.

  10. THE FLOW IN ROTATING CURVED CIRCULAR PIPE

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The combined effects of the system rotation (Coriolis force) and curvature (centrifugal force) on the flow in rotating curved circular pipe with small curvature are examined by perturbation method. A second-order perturbation solution is presented. The secondary flow structure and the primary axial velocity distributions are studied in detail. The loops of the secondary flow are more complex than those in a curved pipe without rotation or a rotating straight pipe. Its numbers depend on the body force ratio F which represents the ratio of the Coriolis to the centrifugal force. The maximum of the axial velocity is pushed to either outer bend or inner bend, which is also determined by F. The results are confirmed by the results of other authors who studied the same problem by different methods.

  11. Evaluation of flawed piping under dynamic loading

    Energy Technology Data Exchange (ETDEWEB)

    Nickell, R.E. (Applied Science and Technology, Inc., Poway, CA (United States)); Quinones, D.F. (Cloud (Robert L.) and Associates, Inc., Berkeley, CA (United States)); Gilman, J.D. (Electric Power Research Inst., Palo Alto, CA (United States))

    1992-10-01

    This report describes analytical and interpretative research on results of large-scale dynamic tests of flawed pipe which were conducted for the International Piping Integrity Research Group (IPIRG). Here, the adequacy of dynamic analysis methods is examined, as well as margins against failure associated with flaw evaluation criteria. Experimental and analytical results are related to requirements of the American Society of Mechanical Engineers Boiler and Pressure Vessel Codes. Code limits of operability bound all test results. Guidance is offered on selection of Z-factors'' for austenitic materials to retain code safety margins. In the IPIRG tests, efforts to produce a nearly instantaneous full severance pipe break were unsuccessful, indicating that this hypothetical basis for plant accident evaluations is conservative.

  12. Development of solutions to benchmark piping problems

    Energy Technology Data Exchange (ETDEWEB)

    Reich, M; Chang, T Y; Prachuktam, S; Hartzman, M

    1977-12-01

    Benchmark problems and their solutions are presented. The problems consist in calculating the static and dynamic response of selected piping structures subjected to a variety of loading conditions. The structures range from simple pipe geometries to a representative full scale primary nuclear piping system, which includes the various components and their supports. These structures are assumed to behave in a linear elastic fashion only, i.e., they experience small deformations and small displacements with no existing gaps, and remain elastic through their entire response. The solutions were obtained by using the program EPIPE, which is a modification of the widely available program SAP IV. A brief outline of the theoretical background of this program and its verification is also included.

  13. Numerical simulation of centrifugal casting of pipes

    Science.gov (United States)

    Kaschnitz, E.

    2012-07-01

    A numerical simulation model for the horizontal centrifugal pipe casting process was developed with the commercial simulation package Flow3D. It considers - additionally to mass, energy and momentum conservation equations and free surface tracking - the fast radial and slower horizontal movement of the mold. The iron inflow is not steady state but time dependent. Of special importance is the friction between the liquid and the mold in connection with the viscosity and turbulence of the iron. Experiments with the mold at controlled revolution speeds were carried out using a high-speed camera. From these experiments friction coefficients for the description of the interaction between mold and melt were obtained. With the simulation model, the influence of typical process parameters (e.g. melts inflow, mold movement, melt temperature, cooling media) on the wall thickness of the pipes can be studied. The comparison to results of pipes from production shows a good agreement between simulation and reality.

  14. Analytical and Numerical Modeling for Flexible Pipes

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; CHEN Geng

    2011-01-01

    The unbonded flexible pipe of eight layers,in which all the layers except the carcass layer are assumed to have isotropic properties,has been analyzed.Specifically,the carcass layer shows the orthotropic characteristics.The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness.With consideration of the effective elastic moduli,the structure can be properly analyzed.Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated.A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque.Further,the friction and contact of interlayer have been considered.Comparison between the finite element model and experimental results obtained in literature has been given and discussed,which might provide practical and technical support for the application of unbonded flexible pipes.

  15. Flow induced pulsations in pipe systems

    Science.gov (United States)

    Bruggeman, Jan Cornelis

    1987-12-01

    The aeroacoustic behavior of a low Mach number, high Reynolds number flow through a pipe with closed side branches was investigated. Sound is generated by coherent structures of concentrated vorticity formed periodically in the separated flow in the T-shaped junctions of side branches and the main pipe. The case of moderate pulsation amplitudes was investigated. It appears that the vortical flow in a T-joint is an aeroacoustic source of constant strength when acoustic energy losses due to radiation and friction are small but not negligible. When acoustic energy losses due to radiation and friction are negligible, the nonlinear character of vortex damping is the amplitude limiting mechanism. It is stressed that aeroacoustic sources should not be neglected in studies of the response of a piping lay-out with flow to, e.g., the pulsating output of a compressor.

  16. Analytical and numerical modeling for flexible pipes

    Science.gov (United States)

    Wang, Wei; Chen, Geng

    2011-12-01

    The unbonded flexible pipe of eight layers, in which all the layers except the carcass layer are assumed to have isotropic properties, has been analyzed. Specifically, the carcass layer shows the orthotropic characteristics. The effective elastic moduli of the carcass layer have been developed in terms of the influence of deformation to stiffness. With consideration of the effective elastic moduli, the structure can be properly analyzed. Also the relative movements of tendons and relative displacements of wires in helical armour layer have been investigated. A three-dimensional nonlinear finite element model has been presented to predict the response of flexible pipes under axial force and torque. Further, the friction and contact of interlayer have been considered. Comparison between the finite element model and experimental results obtained in literature has been given and discussed, which might provide practical and technical support for the application of unbonded flexible pipes.

  17. Heat pipe reactors for space power applications

    Science.gov (United States)

    Koenig, D. R.; Ranken, W. A.; Salmi, E. W.

    1977-01-01

    A family of heat pipe reactors design concepts has been developed to provide heat to a variety of electrical conversion systems. Three power plants are described that span the power range 1-500 kWe and operate in the temperature range 1200-1700 K. The reactors are fast, compact, heat-pipe cooled, high-temperature nuclear reactors fueled with fully enriched refractory fuels, UC-ZrC or UO2. Each fuel element is cooled by an axially located molybdenum heat pipe containing either sodium or lithium vapor. Virtues of the reactor designs are the avoidance of single-point failure mechanisms, the relatively high operating temperature, and the expected long lifetimes of the fuel element components.

  18. Piping in need of a facelift

    CERN Multimedia

    HSE Unit

    2013-01-01

    The LS1 offers a good opportunity to renovate/consolidate the CERN piping system. This is actually one of this year’s objectives set by CERN's Director-General as the state of several pressurised pipe networks has become a matter of significant concern. The ageing infrastructure makes it essential to perform in-depth inspections and repairs on several networks, which are easier to perform when most systems are down.   We are advising each Department/Group concerned to take a series of actions to ensure that their pipelines comply with personal, environmental and operational safety requirements: an inventory of ageing installations to allow a long-term replacement plan to be drawn up; immediate repair in the event of major signs of deterioration; investigation and repair/mitigation measures to prevent leaks; marking and, if necessary, mechanical protection of pipes located in thoroughfares and exposed to vehicles or people. Help needed, questions? Do not hesitate to contact us ...

  19. Novel Wick Structures for Improved Heat Pipe Performance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Heat pipes are commonly used for transporting heat over relatively long distances with very low temperature drop. One of the limitations of heat pipes is the...

  20. Inertial Effects on Finite Length Pipe Seismic Response

    Directory of Open Access Journals (Sweden)

    Virginia Corrado

    2012-01-01

    Full Text Available A seismic analysis for soil-pipe interaction which accounts for length and constraining conditions at the ends of a continuous pipe is developed. The Winkler model is used to schematize the soil-structure interaction. The approach is focused on axial strains, since bending strains in a buried pipe due to the wave propagation are typically a second-order effect. Unlike many works, the inertial terms are considered in solving equations. Accurate numerical simulations are carried out to show the influence of pipe length and constraint conditions on the pipe seismic strain. The obtained results are compared with results inferred from other models present in the literature. For free-end pipelines, inertial effects have significant influence only for short length. On the contrary, their influence is always important for pinned pipes. Numerical simulations show that a simple rigid model can be used for free-end pipes, whereas pinned pipes need more accurate models.

  1. Applications and market of PVC for piping industry

    National Research Council Canada - National Science Library

    Johnny De N. Martins; Estevão Freire; Henry Hemadipour

    2009-01-01

    .... Pipes and fittings constitute the largest volume application at 40% of the marketplace. This paper discusses the piping extrusion process and the worldwide PVC market, emphasizing the Brazilian market...

  2. Hydrophobic liquid/gas separator for heat pipes

    Science.gov (United States)

    Marcus, B. D.

    1972-01-01

    Perforated nonwetting plug of material such as polytetrafluoroethylene is mounted in gas reservoir feed tube, preferably at end which extends into heat pipe condenser section, to prevent liquid from entering gas reservoir of passively controlled heat pipe.

  3. Pigging ends freezeups in caustic piping system

    Energy Technology Data Exchange (ETDEWEB)

    Gros, R.; Gaines, A.

    1985-03-01

    Convent Chemical Corporation in Convent, LA produces and ships bulk quantities of chlorine and caustic soda (NaOH). The caustic soda is available in various grades, including a 50% aqueous solution that freezes at 56/sup 0/F. An extensive network of chemical-resistant polypropylene-lined steel pipe (without heat tracing) is used to transfer the caustic soda from the production area to storage tanks and to the loading facilities for tank trucks, rail tank cars and barges. A sudden drop in ambient temperature can cause freezeup of the caustic transfer pipes which may result in downtime of as much as a week. Convent plant engineers designed a pigging system for the outdoor caustic transfer lines in the tank farm and to the loading stations. The patented design pig, (internal pipeline cleaner) consists of a flexible, bullet-shaped cylinder of chemical-resistant polyurethane foam with strips of urethane rubber on the surface, or with a solid coating of the tough material. Fluid or gas pressure on the sealed concave base propels the flexible pig through the pipe, valves, elbows, and other fittings, and material ahead of the pig is discharged into an appropriate receiver. The pigging system has eliminated the caustic freezing and plugging problems since it was installed in the summer of 1981. The flexible pig, propelled by 80 psi air, is used to clear the pipelines whenever caustic is transferred during the winter months. The air-propelled pig is designed and sized to easily pass through restrictions in the piping system, such as reduced port plug valves, but was once stuck when it reached a section of pipe that had collapsed. A pig containing the Cobalt 60 nuclear element was inserted into the line to quickly locate the stuck pig with the Geiger counter. The faulty section of pipe was replaced with a new polypropylene lined spool piece.

  4. Variable conductance heat pipe technology. [research project resulting in heat pipe experiment on OAO-3 satellite

    Science.gov (United States)

    Anderson, W. T.; Edwards, D. K.; Eninger, J. E.; Marcus, B. D.

    1974-01-01

    A research and development program in variable conductance heat pipe technology is reported. The project involved: (1) theoretical and/or experimental studies in hydrostatics, (2) hydrodynamics, (3) heat transfer into and out of the pipe, (4) fluid selection, and (5) materials compatibility. The development, fabrication, and test of the space hardware resulted in a successful flight of the heat pipe experiment on the OAO-3 satellite. A summary of the program is provided and a guide to the location of publications on the project is included.

  5. Piping and tubing technology: A compilation

    Science.gov (United States)

    1971-01-01

    A compilation on the devices, techniques, and methods used in piping and tubing technology is presented. Data cover the following: (1) a number of fittings, couplings, and connectors that are useful in joining tubing and piping and various systems, (2) a family of devices used where flexibility and/or vibration damping are necessary, (3) a number of devices found useful in the regulation and control of fluid flow, and (4) shop hints to aid in maintenance and repair procedures such as cleaning, flaring, and swaging of tubes.

  6. Application of Heat Pipes in Cold Region

    Science.gov (United States)

    Mochizuki, Masataka

    Recently, there has been put into practical use of heat pipes as space application, electronics cooling, and waste heat recovery. Especially, the low temperature heat pipe which can be used in below atmospheric temperature are also actively developed and applied in terrestrial field. These are based on utilization of natural energy in cold region. This paper is described about application of snow melting and deicing system on a road and roof, snow damage prevention system for electric pole branch wire, artificial permafrost storage system as a reverse utilization of cold atmosphere, and cryo-anchor applied in Alaska and northern Canada.

  7. ATLAS Beam Pipe and LUCID Detector

    CERN Multimedia

    2008-01-01

    The film will show you the descending and installation of the last element of the LHC beam pipe. Around the beam pipe is installed an ATLAS detector called LUCID. The same kind of element is on both sides of ATLAS. This detector measures the rate of the collisions in ATLAS. You can also get more information about LUCID detector by watching the part were Vincent Hedberg is interviewed (00:01:20). Almost at the end of the film there is the interview of the Raymond Veness. He tells about the delicate operations of finishing the vacuum system and the LHC (00:26:00).

  8. Reconfigurable manufacturing execution system for pipe cutting

    Science.gov (United States)

    Yin, Y. H.; Xie, J. Y.

    2011-08-01

    This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

  9. INVESTIGATION INTO THE SPRINGBACK OF PIPE BENDING USING INDUCTION HEATING

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Stresses and deformation states of pipe bending are investigated under loading or unloading with various pipe materials, size, bending radius and deformation temperature. A theorem of springback of large diameter pipe bending is presented. The experiments are carried out with pipe materials of 20, 10CrMo910 and 12Cr1MoV steel. Results of computations are in good agreement with experiments.

  10. Experimental investigations on an axial grooved cryogenic heat pipe

    Directory of Open Access Journals (Sweden)

    Senthil Kumar Muniappan

    2012-01-01

    Full Text Available This paper deals with development and studies of a trapezoidal axial grooved nitrogen heat pipe. A special liquid nitrogen cryostat has been designed and developed for evaluating the performance of heat pipe where the condenser portion is connected to the cold sink externally. Experiments have been performed on the heat pipe as well as on an equivalent diameter copper rod at different heat loads. The steady state performance of the heat pipe is compared with that of copper rod.

  11. The Puzzle of a Marble in a Spinning Pipe

    Science.gov (United States)

    2015-05-01

    MAY 2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE The Puzzle of a Marble in a Spinning Pipe 5a. CONTRACT...inside a rotating pipe and then suddenly released? 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR... pipe (of slightly larger diameter than the marble) and held there by a catch. The pipe is glued to a rotating turntable having frictionless bearings

  12. Design of macro-synthetic fibre reinforced concrete pipes

    OpenAIRE

    Fuente, Albert de la; Escariz, Renata Campos; Figueiredo,Antonio Domingues de; Aguado, Antonio

    2013-01-01

    This paper presents an experimental campaign in which concrete pipes were manufactured using plastic fibres as the sole reinforcement material. In this regard, it has been demonstrated that the use of plastic fibres is compatible with pipe production systems, and that, when subjected to the crushing test (CT), plastic fibre reinforced pipes yield strength classes that are attractive in terms of the growth of this material in the concrete pipe industry. Moreover, the results obtained from b...

  13. 33 CFR 157.11 - Pumping, piping and discharge arrangements.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Pumping, piping and discharge... CARRYING OIL IN BULK Design, Equipment, and Installation § 157.11 Pumping, piping and discharge arrangements. (a) Each tank vessel must have a fixed piping system for transferring oily mixtures from...

  14. 46 CFR 119.510 - Bilge piping system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Bilge piping system. 119.510 Section 119.510 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150... Ballast Systems § 119.510 Bilge piping system. A vessel must be provided with a piping system that...

  15. 46 CFR 56.50-105 - Low-temperature piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Low-temperature piping. 56.50-105 Section 56.50-105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-105 Low-temperature piping. (a) Class...

  16. 46 CFR 45.153 - Through-hull piping: General.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Through-hull piping: General. 45.153 Section 45.153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Conditions of Assignment § 45.153 Through-hull piping: General. (a) All through-hull pipes required by...

  17. 46 CFR 154.910 - Inert gas piping: Location.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas piping: Location. 154.910 Section 154.910 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping...

  18. 46 CFR 151.15-6 - Venting piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Venting piping. 151.15-6 Section 151.15-6 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Tanks § 151.15-6 Venting piping. (a) The back pressure in the relief... condensate which may accumulate in the vent piping. (b)...

  19. 46 CFR 154.1834 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 154.1834 Section 154.1834... piping. The person in charge of cargo transfer shall ensure that cargo is transferred to or from a cargo tank only through the cargo piping system....

  20. 46 CFR 194.20-19 - Piping and electrical requirements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Piping and electrical requirements. 194.20-19 Section 194.20-19 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... Storerooms § 194.20-19 Piping and electrical requirements. (a) Piping, electrical equipment, and wiring...

  1. 29 CFR 1915.163 - Ship's piping systems.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's piping systems. 1915.163 Section 1915.163 Labor... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.163 Ship's piping systems. (a) Before work is performed on a valve, fitting, or section...

  2. 46 CFR 56.50-20 - Pressure relief piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Pressure relief piping. 56.50-20 Section 56.50-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-20 Pressure relief piping. (a)...

  3. 49 CFR 179.400-17 - Inner tank piping.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Inner tank piping. 179.400-17 Section 179.400-17 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...-17 Inner tank piping. (a) Product lines. The piping system for vapor and liquid phase transfer...

  4. 46 CFR 153.283 - Valving for cargo piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Valving for cargo piping. 153.283 Section 153.283... CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Piping Systems and Cargo Handling Equipment § 153.283 Valving for cargo piping. (a) Except as described in...

  5. 46 CFR 105.20-5 - Piping systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping systems. 105.20-5 Section 105.20-5 Shipping COAST... VESSELS DISPENSING PETROLEUM PRODUCTS Specific Requirements-Cargo Tanks § 105.20-5 Piping systems. (a) Piping shall be copper, nickel copper, or copper nickel having a minimum wall thickness of 0.035″;...

  6. 46 CFR 34.25-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.25-15 Section 34.25-15 Shipping COAST... Systems, Details § 34.25-15 Piping—T/ALL. (a) All piping, valves and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) Distribution piping shall be...

  7. 46 CFR 58.16-17 - Piping and fittings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Piping and fittings. 58.16-17 Section 58.16-17 Shipping... AND RELATED SYSTEMS Liquefied Petroleum Gases for Cooking and Heating § 58.16-17 Piping and fittings. (a) The piping between the cylinders and the appliances shall be seamless annealed copper tubing...

  8. 46 CFR 34.10-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.10-15 Section 34.10-15 Shipping COAST... § 34.10-15 Piping—T/ALL. (a) All piping, valves and fittings shall meet the applicable requirements of... isolate damaged sections of piping except on self-propelled vessels carrying bulk liquefied gases...

  9. 46 CFR 154.356 - Cargo emergency jettisoning piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo emergency jettisoning piping. 154.356 Section 154.356 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Ship Arrangements § 154.356 Cargo emergency jettisoning piping. Emergency jettisoning piping...

  10. 46 CFR 34.20-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.20-15 Section 34.20-15 Shipping COAST... § 34.20-15 Piping—T/ALL. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings of ferrous...

  11. 46 CFR 45.155 - Inlets and discharge piping: Valves.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Inlets and discharge piping: Valves. 45.155 Section 45... LINES Conditions of Assignment § 45.155 Inlets and discharge piping: Valves. (a) Except as provided in... visited by the crew. (e) Through-hull piping systems in machinery spaces may have valves with...

  12. 46 CFR 98.30-29 - Piping incompatible products.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Piping incompatible products. 98.30-29 Section 98.30-29 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS SPECIAL... Piping incompatible products. No person may pipe a portable tank with another tank that contains...

  13. 46 CFR 56.50-85 - Tank-vent piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tank-vent piping. 56.50-85 Section 56.50-85 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-85 Tank-vent piping. (a) This...

  14. 46 CFR 153.970 - Cargo transfer piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo transfer piping. 153.970 Section 153.970 Shipping... § 153.970 Cargo transfer piping. The person in charge of cargo transfer shall ensure that: (a) Cargo is transferred to or from a cargo tank only through the tankship's cargo piping system; (b) Vapor not returned...

  15. 46 CFR 154.526 - Piping joints: Flange connection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping joints: Flange connection. 154.526 Section 154.526 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Cargo and Process Piping Systems § 154.526 Piping joints: Flange connection. Flange...

  16. 46 CFR 34.17-15 - Piping-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Piping-T/ALL. 34.17-15 Section 34.17-15 Shipping COAST... Systems, Details § 34.17-15 Piping—T/ALL. (a) All piping, valves, and fittings shall meet the applicable requirements of subchapter F (Marine Engineering) of this chapter. (b) All piping, valves, and fittings...

  17. 46 CFR 58.20-20 - Refrigeration piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Refrigeration piping. 58.20-20 Section 58.20-20 Shipping... AND RELATED SYSTEMS Refrigeration Machinery § 58.20-20 Refrigeration piping. (a) All piping materials... chemical and physical properties as to remain ductile at the lowest operating temperature. (b)...

  18. 46 CFR 58.60-7 - Industrial systems: Piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Industrial systems: Piping. 58.60-7 Section 58.60-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY...) § 58.60-7 Industrial systems: Piping. The piping for industrial systems under this subpart must...

  19. 46 CFR 153.281 - Piping to independent tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Piping to independent tanks. 153.281 Section 153.281... Systems and Cargo Handling Equipment § 153.281 Piping to independent tanks. Piping for an independent cargo tank must penetrate the tank only through that part of the tank or dome extending above...

  20. Mashing up Multiple Web Feeds Using Yahoo! Pipes

    Science.gov (United States)

    Fagan, Jody Condit

    2007-01-01

    Pipes is an interactive data aggregator and manipulator that lets you mashup your favorite online data sources. Pipes could be used to "combine many feeds into one, then sort, filter and translate to create your ultimate custom feed. In this article, the author describes how to use Yahoo! Pipes. The author shares what she has learned in…