WorldWideScience

Sample records for pi-mode structure pims

  1. Tuning procedure for the Linac4 PI Mode Structure(PIMS)

    CERN Document Server

    Ugena Tirado, P

    2012-01-01

    PI-Mode-Structure (PIMS) cavities will be used in the high energy section of LINAC4 (102-160 MeV). Each cavity is made of 7 coupled cells, operated in the π-mode at a resonant frequency of 352.2 MHz. The cell length remains constant for each of the 12 cavities but changes from cavity to cavity to synchronise with the increased beam energy. This paper reports on the tuning process required to get a constant voltage in each cell at the resonant frequency which consists of re-machining to the required level the tuning rings located on each cell-wall. An algorithm based on single cell detuning, equivalent circuit simulations and precise 3D simulations for the 3 different cell types of each cavity has been developed and successfully applied to the tuning of the first PIMS cavity. In order to reduce the simulation effort for the remaining 11 cavities, an interpolation algorithm based on 3 cavities has been developed and validated. In a second tuning step, after the electron beam welding of all elements, the final ...

  2. The Very Model of a Modern PI-Mode Structure

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Linac4's PI-Mode Structures (PIMS) are the first structures of their kind to accelerate protons. Now, over three years after work began on production, over 180 PIMS elements have been rough-machined and the first new PIMS cavity is being assembled at CERN.   The newly assembled PIMS cavity undergoes testing in CERN's Main Workshop. As the final accelerating structures of Linac4, located 53 m to 74 m downstream of the source, the state-of-the-art PIMS cavities will take protons from 100 to 160 MeV. While the first cavity was built entirely at CERN, construction of the remaining cavities has become a larger, multi-national operation. The newest PIMS cavity is being assembled and validated at CERN's Main Workshop. Built in collaboration with the National Centre for Nuclear Research (NCBJ, Poland) and the Jülich Research Centre (Germany), it is the first of its kind to be produced outside the Organization. Sharing all the required know...

  3. Manufacturing the LINAC4 PI-Mode Structure Prototype at CERN

    CERN Document Server

    Favre, A; Dallocchio, A; Geisser, J M; Gentini, L; Gerigk, L; Mathot, S; Polini, M; Sgobba, S; Tardy, T; Wegner, R

    2011-01-01

    The PI-Mode Structure (PIMS) of Linac4 consists of 7-cell cavities made from alternating OFE copper discs and rings welded together with electron beam (EB) welding. A full-scale prototype cavity of almost 1.5 m in length has been manufactured, assembled, and tested at CERN to prepare the series production of 12 PIMS cavities as part of an international collaboration. This paper reports on the construction experience including machining operations, EB welding, vacuum brazing, and metrological measurements results.

  4. The hot prototype of the Pi-mode structure for LINAC4

    CERN Document Server

    Gerigk, F; Bourquin, P; Dallocchio, A; Favre, G; Geisser, J M; Gentini, L; Giguet, J M; Mathot, S; Polini, M; Pugnat, D; Riffaud, B; Sgobba, S; Tardy, T; Ugena Tirado, P; Vretenar, M

    2010-01-01

    The PIMS (Pi-Mode-Structure) cavities for Linac4 are made of 7 coupled cells operating in !-mode at a frequency of 352 MHz. The mechanical concept is derived from the 5-cell cavities used in the LEP machine, whereas cell length and coupling are adapted for proton acceleration in the range from 50 to 160 MeV. Linac4 will be the first machine to employ this type of cavities for low-beta protons. During the first years of operation the PIMS will be used at low duty cycle (0.1%) as part of the consolidated LHC proton injector complex. It is designed, however, to operate eventually in a high duty cycle (10%) proton injector, which could be used as proton front-end for neutrino or RIB applications. To prepare for the series construction of the 12 PIMS units the first cavity (102 MeV beam energy) has been designed and constructed at CERN, to be used as a hot prototype for RF tests and as a pre-series mechanical unit. In this paper we report on some of the design features, the construction experience, and first measu...

  5. Crystal structure of the PIM2 kinase in complex with an organoruthenium inhibitor.

    Directory of Open Access Journals (Sweden)

    Alex N Bullock

    Full Text Available BACKGROUND: The serine/threonine kinase PIM2 is highly expressed in human leukemia and lymphomas and has been shown to positively regulate survival and proliferation of tumor cells. Its diverse ATP site makes PIM2 a promising target for the development of anticancer agents. To date our knowledge of catalytic domain structures of the PIM kinase family is limited to PIM1 which has been extensively studied and which shares about 50% sequence identity with PIM2. PRINCIPAL FINDINGS: Here we determined the crystal structure of PIM2 in complex with an organoruthenium complex (inhibition in sub-nanomolar level. Due to its extraordinary shape complementarity this stable organometallic compound is a highly potent inhibitor of PIM kinases. SIGNIFICANCE: The structure of PIM2 revealed several differences to PIM1 which may be explored further to generate isoform selective inhibitors. It has also demonstrated how an organometallic inhibitor can be adapted to the binding site of protein kinases to generate highly potent inhibitors. ENHANCED VERSION: This article can also be viewed as an enhanced version in which the text of the article is integrated with interactive 3D representations and animated transitions. Please note that a web plugin is required to access this enhanced functionality. Instructions for the installation and use of the web plugin are available in Text S1.

  6. Sudan PIMS

    Data.gov (United States)

    US Agency for International Development — The development of this system was awarded to MSI in May 2013 to design and help USAID/South Sudan manage a web-based PIMS that is customized to USAID/South Sudan's...

  7. The Protein Information Management System (PiMS): a generic tool for any structural biology research laboratory

    Science.gov (United States)

    Morris, Chris; Pajon, Anne; Griffiths, Susanne L.; Daniel, Ed; Savitsky, Marc; Lin, Bill; Diprose, Jonathan M.; Wilter da Silva, Alan; Pilicheva, Katya; Troshin, Peter; van Niekerk, Johannes; Isaacs, Neil; Naismith, James; Nave, Colin; Blake, Richard; Wilson, Keith S.; Stuart, David I.; Henrick, Kim; Esnouf, Robert M.

    2011-01-01

    The techniques used in protein production and structural biology have been developing rapidly, but techniques for recording the laboratory information produced have not kept pace. One approach is the development of laboratory information-management systems (LIMS), which typically use a relational database schema to model and store results from a laboratory workflow. The underlying philosophy and implementation of the Protein Information Management System (PiMS), a LIMS development specifically targeted at the flexible and unpredictable workflows of protein-production research laboratories of all scales, is described. PiMS is a web-based Java application that uses either Postgres or Oracle as the underlying relational database-management system. PiMS is available under a free licence to all academic laboratories either for local installation or for use as a managed service. PMID:21460443

  8. The Protein Information Management System (PiMS): a generic tool for any structural biology research laboratory.

    Science.gov (United States)

    Morris, Chris; Pajon, Anne; Griffiths, Susanne L; Daniel, Ed; Savitsky, Marc; Lin, Bill; Diprose, Jonathan M; da Silva, Alan Wilter; Pilicheva, Katya; Troshin, Peter; van Niekerk, Johannes; Isaacs, Neil; Naismith, James; Nave, Colin; Blake, Richard; Wilson, Keith S; Stuart, David I; Henrick, Kim; Esnouf, Robert M

    2011-04-01

    The techniques used in protein production and structural biology have been developing rapidly, but techniques for recording the laboratory information produced have not kept pace. One approach is the development of laboratory information-management systems (LIMS), which typically use a relational database schema to model and store results from a laboratory workflow. The underlying philosophy and implementation of the Protein Information Management System (PiMS), a LIMS development specifically targeted at the flexible and unpredictable workflows of protein-production research laboratories of all scales, is described. PiMS is a web-based Java application that uses either Postgres or Oracle as the underlying relational database-management system. PiMS is available under a free licence to all academic laboratories either for local installation or for use as a managed service.

  9. The Protein Information Management System (PiMS): a generic tool for any structural biology research laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Morris, Chris [STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Pajon, Anne [Wellcome Trust Genome Campus, Hinxton CB10 1SD (United Kingdom); Griffiths, Susanne L. [University of York, Heslington, York YO10 5DD (United Kingdom); Daniel, Ed [STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Savitsky, Marc [University of Oxford, Roosevelt Drive, Oxford OX3 7BN (United Kingdom); Lin, Bill [STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Diprose, Jonathan M. [University of Oxford, Roosevelt Drive, Oxford OX3 7BN (United Kingdom); Wilter da Silva, Alan [Wellcome Trust Genome Campus, Hinxton CB10 1SD (United Kingdom); Pilicheva, Katya [University of Oxford, Roosevelt Drive, Oxford OX3 7BN (United Kingdom); Troshin, Peter [STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Niekerk, Johannes van [University of Dundee, Dundee DD1 5EH, Scotland (United Kingdom); Isaacs, Neil [University of Glasgow, Glasgow G12 8QQ, Scotland (United Kingdom); Naismith, James [University of St Andrews, St Andrews, Fife KY16 9ST, Scotland (United Kingdom); Nave, Colin; Blake, Richard [STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom); Wilson, Keith S. [University of York, Heslington, York YO10 5DD (United Kingdom); Stuart, David I. [University of Oxford, Roosevelt Drive, Oxford OX3 7BN (United Kingdom); Henrick, Kim [Wellcome Trust Genome Campus, Hinxton CB10 1SD (United Kingdom); Esnouf, Robert M., E-mail: robert@strubi.ox.ac.uk [University of Oxford, Roosevelt Drive, Oxford OX3 7BN (United Kingdom); STFC Daresbury Laboratory, Warrington WA4 4AD (United Kingdom)

    2011-04-01

    The Protein Information Management System (PiMS) is described together with a discussion of how its features make it well suited to laboratories of all sizes. The techniques used in protein production and structural biology have been developing rapidly, but techniques for recording the laboratory information produced have not kept pace. One approach is the development of laboratory information-management systems (LIMS), which typically use a relational database schema to model and store results from a laboratory workflow. The underlying philosophy and implementation of the Protein Information Management System (PiMS), a LIMS development specifically targeted at the flexible and unpredictable workflows of protein-production research laboratories of all scales, is described. PiMS is a web-based Java application that uses either Postgres or Oracle as the underlying relational database-management system. PiMS is available under a free licence to all academic laboratories either for local installation or for use as a managed service.

  10. South Africa PIMS

    Data.gov (United States)

    US Agency for International Development — PIMS (SOL-674-12-000037) collects and provides information on activities, results, partners, and staff supported through PEPFAR funding in each sub-district of South...

  11. An introduction to the Gilgamesh PIM architecture

    Science.gov (United States)

    Sterling, T.; Bergman, L.

    2001-01-01

    The focus of the work conducted is on a class of structures made possible by the merger of logic and memory. Processing In Memory (PIM) extends the design space much farther by closely associating the logic with the memory interface to realize innovative structures never previously possible and thus exposing entirely new opportunities for computer architecture.

  12. The discovery of novel benzofuran-2-carboxylic acids as potent Pim-1 inhibitors.

    Science.gov (United States)

    Xiang, Yibin; Hirth, Bradford; Asmussen, Gary; Biemann, Hans-Peter; Bishop, Kimberly A; Good, Andrew; Fitzgerald, Maria; Gladysheva, Tatiana; Jain, Annuradha; Jancsics, Katherine; Liu, Jinyu; Metz, Markus; Papoulis, Andrew; Skerlj, Renato; Stepp, J David; Wei, Ronnie R

    2011-05-15

    Novel benzofuran-2-carboxylic acids, exemplified by 29, 38 and 39, have been discovered as potent Pim-1 inhibitors using fragment based screening followed by X-ray structure guided medicinal chemistry optimization. The compounds demonstrate potent inhibition against Pim-1 and Pim-2 in enzyme assays. Compound 29 has been tested in the Ambit 442 kinase panel and demonstrates good selectivity for the Pim kinase family. X-ray structures of the inhibitor/Pim-1 binding complex reveal important salt-bridge and hydrogen bond interactions mediated by the compound's carboxylic acid and amino groups.

  13. Photodynamic immune modulation (PIM)

    Science.gov (United States)

    North, John R.; Hunt, David W. C.; Simkin, Guillermo O.; Ratkay, Leslie G.; Chan, Agnes H.; Lui, Harvey; Levy, Julia G.

    1999-09-01

    Photodynamic Therapy (PDT) is accepted for treatment of superficial and lumen-occluding tumors in regions accessible to activating light and is now known to be effective in closure of choroidal neovasculature in Age Related Macular Degeneration. PDT utilizes light absorbing drugs (photosensitizers) that generate the localized formation of reactive oxygen species after light exposure. In a number of systems, PDT has immunomodulatory effects; Photodynamic Immune Modulation (PIM). Using low- intensity photodynamic regimens applied over a large body surface area, progression of mouse autoimmune disease could be inhibited. Further, this treatment strongly inhibited the immunologically- medicated contact hypersensitivity response to topically applied chemical haptens. Immune modulation appears to result from selective targeting of activated T lymphocytes and reduction in immunostimulation by antigen presenting cells. Psoriasis, an immune-mediated skin condition, exhibits heightened epidermal cell proliferation, epidermal layer thickening and plaque formation at different body sites. In a recent clinical trial, approximately one-third of patients with psoriasis and arthritis symptoms (psoriatic arthritis) displayed a significant clinical improvement in several psoriasis-related parameters after four weekly whole-body PIM treatments with verteporfin. The safety profile was favorable. The capacity of PIM to influence other human immune disorders including rheumatoid arthritis is under extensive evaluation.

  14. 2D PIM Simulation Based on COMSOL

    DEFF Research Database (Denmark)

    Wang, Xinbo; Cui, Wanzhao; Wang, Jingyu;

    2011-01-01

    Passive intermodulation (PIM) is a problematic type of nonlinear distortion en- countered in many communication systems. To analyze the PIM distortion resulting from ma- terial nonlinearity, a 2D PIM simulation method based on COMSOL is proposed in this paper. As an example, a rectangular wavegui...

  15. Pure- and mixed-gas CO2/CH4 separation properties of PIM-1 and an amidoxime-functionalized PIM-1

    KAUST Repository

    Swaidan, Raja

    2014-05-01

    The prototypical solution-processable polymer of intrinsic microporosity, PIM-1, and derivatives thereof offer combinations of permeability and selectivity that make them potential candidate materials for membrane-based gas separations. Paramount to the design and evaluation of PIMs for economical natural gas sweetening is a high and stable CO2/CH4 selectivity under realistic, mixed-gas conditions. Here, amidoxime-functionalized PIM-1 (AO-PIM-1) was prepared and examined for fundamental structure/property relationships. Qualitative NLDFT pore-size distribution analyses of physisorption isotherms (N2 at -196 oC; CO2 at 0 oC) reveal a tightened microstructure indicating size-sieving ultra-microporosity (<7Å). AO-PIM-1 demonstrated a three-fold increase in αD(CO2/CH4) over PIM-1, surpassing the 2008 upper bound with P(CO2)=1153Barrer and ideal α(CO2/CH4)=34. Under a 50:50 CO2:CH4 mixed-gas feed, AO-PIM-1 showed less selectivity loss than PIM-1, maintaining a mixed-gas α(CO2/CH4) ~21 across a 20bar pressure range. Conversely, PIM-1 endured up to 60% increases in mixed-gas CH4 permeability over pure-gas values concurrent with a selectivity of only ~8 at 20bar. A pervasive intermolecular hydrogen bonding network in AO-PIM-1 predominantly yields a rigidified microstructure that mitigates CO2-induced matrix dilations, reducing detrimental mixed-gas CH4 copermeation. © 2014 Elsevier B.V.

  16. Human CD180 Transmits Signals via the PIM-1L Kinase.

    Directory of Open Access Journals (Sweden)

    Nicole Egli

    Full Text Available Toll-like receptors (TLRs are important sensors of the innate immune system that recognize conserved structural motifs and activate cells via a downstream signaling cascade. The CD180/MD1 molecular complex is an unusual member of the TLR family, since it lacks the components that are normally required for signal transduction by other TLRs. Therefore the CD180/MD 1 complex has been considered of being incapable of independently initiating cellular signals. Using chemogenetic approaches we identified specifically the membrane bound long form of PIM-1 kinase, PIM-1L as the mediator of CD180-dependent signaling. A dominant negative isoform of PIM-1L, but not of other PIM kinases, inhibited signaling elicited by cross-linking of CD180, and this effect was phenocopied by PIM inhibitors. PIM-1L was directed to the cell membrane by its N-terminal extension, where it colocalized and physically associated with CD180. Triggering CD180 also induced increased phosphorylation of the anti-apoptotic protein BAD in a PIM kinase-dependent fashion. Also in primary human B cells, which are the main cells expressing CD180 in man, cross-linking of CD180 by monoclonal antibodies stimulated cell survival and proliferation that was abrogated by specific inhibitors. By associating with PIM-1L, CD180 can thus obtain autonomous signaling capabilities, and this complex is then channeling inflammatory signals into B cell survival programs. Pharmacological inhibition of PIM-1 should therefore provide novel therapeutic options in diseases that respond to innate immune stimulation with subsequently increased B cell activity, such as lupus erythematosus or myasthenia gravis.

  17. Targeting the Pim kinases in multiple myeloma.

    LENUS (Irish Health Repository)

    Keane, N A

    2015-07-17

    Multiple myeloma (MM) is a plasma cell malignancy that remains incurable. Novel treatment strategies to improve survival are urgently required. The Pims are a small family of serine\\/threonine kinases with increased expression across the hematological malignancies. Pim-2 shows highest expression in MM and constitutes a promising therapeutic target. It is upregulated by the bone marrow microenvironment to mediate proliferation and promote MM survival. Pim-2 also has a key role in the bone destruction typically seen in MM. Additional putative roles of the Pim kinases in MM include trafficking of malignant cells, promoting oncogenic signaling in the hypoxic bone marrow microenvironment and mediating resistance to therapy. A number of Pim inhibitors are now under development with lead compounds entering the clinic. The ATP-competitive Pim inhibitor LGH447 has recently been reported to have single agent activity in MM. It is anticipated that Pim inhibition will be of clinical benefit in combination with standard treatments and\\/or with novel drugs targeting other survival pathways in MM.

  18. Discovery and Optimization of Macrocyclic Quinoxaline-pyrrolo-dihydropiperidinones as Potent Pim-1/2 Kinase Inhibitors.

    Science.gov (United States)

    Cee, Victor J; Chavez, Frank; Herberich, Bradley; Lanman, Brian A; Pettus, Liping H; Reed, Anthony B; Wu, Bin; Wurz, Ryan P; Andrews, Kristin L; Chen, Jie; Hickman, Dean; Laszlo, Jimmy; Lee, Matthew R; Guerrero, Nadia; Mattson, Bethany K; Nguyen, Yen; Mohr, Christopher; Rex, Karen; Sastri, Christine E; Wang, Paul; Wu, Qiong; Wu, Tian; Xu, Yang; Zhou, Yihong; Winston, Jeffrey T; Lipford, J Russell; Tasker, Andrew S; Wang, Hui-Ling

    2016-04-14

    The identification of Pim-1/2 kinase overexpression in B-cell malignancies suggests that Pim kinase inhibitors will have utility in the treatment of lymphoma, leukemia, and multiple myeloma. Starting from a moderately potent quinoxaline-dihydropyrrolopiperidinone lead, we recognized the potential for macrocyclization and developed a series of 13-membered macrocycles. The structure-activity relationships of the macrocyclic linker were systematically explored, leading to the identification of 9c as a potent, subnanomolar inhibitor of Pim-1 and -2. This molecule also potently inhibited Pim kinase activity in KMS-12-BM, a multiple myeloma cell line with relatively high endogenous levels of Pim-1/2, both in vitro (pBAD IC50 = 25 nM) and in vivo (pBAD EC50 = 30 nM, unbound), and a 100 mg/kg daily dose was found to completely arrest the growth of KMS-12-BM xenografts in mice.

  19. A combination strategy to inhibit Pim-1: synergism between noncompetitive and ATP-competitive inhibitors.

    Science.gov (United States)

    Mori, Mattia; Tintori, Cristina; Christopher, Robert Selwyne Arul; Radi, Marco; Schenone, Silvia; Musumeci, Francesca; Brullo, Chiara; Sanità, Patrizia; Delle Monache, Simona; Angelucci, Adriano; Kissova, Miroslava; Crespan, Emmanuele; Maga, Giovanni; Botta, Maurizio

    2013-03-01

    Pim-1 is a serine/threonine kinase critically involved in the initiation and progression of various types of cancer, especially leukemia, lymphomas and solid tumors such as prostate, pancreas and colon, and is considered a potential drug target against these malignancies. In an effort to discover new potent Pim-1 inhibitors, a previously identified ATP-competitive indolyl-pyrrolone scaffold was expanded to derive structure-activity relationship data. A virtual screening campaign was also performed, which led to the discovery of additional ATP-competitive inhibitors as well as a series of 2-aminothiazole derivatives, which are noncompetitive with respect to both ATP and peptide substrate. This mechanism of action, which resembles allosteric inhibition, has not previously been characterized for Pim-1. Notably, further evaluation of the 2-aminothiazoles indicated a synergistic inhibitory effect in enzymatic assays when tested in combination with ATP-competitive inhibitors. A synergistic effect in the inhibition of cell proliferation by ATP-competitive and ATP-noncompetitive compounds was also observed in prostate cancer cell lines (PC3), where all Pim-1 inhibitors tested in showed synergism with the known anticancer agent, paclitaxel. These results further establish Pim-1 as a target in cancer therapy, and highlight the potential of these agents for use as adjuvant agents in the treatment of cancer diseases in which Pim-1 is associated with chemotherapeutic resistance.

  20. Azide-based cross-linking of polymers of intrinsic microporosity (PIMs) for condensable gas separation

    KAUST Repository

    Du, Naiying

    2011-03-11

    Cross-linked polymers of intrinsic microporosity (PIM)s for gas separation membranes, were prepared by a nitrene reaction from a representative PIM in the presence of two different diazide cross-linkers. The reaction temperature was optimized using TGA. The homogenous membranes were cast from THF solutions of different ratios of PIM to azides. The resulting cross-linked structures of the PIMs membranes were formed at 175 °C after 7.5 h and confirmed by TGA, XPS, FT-IR spectroscopy and gel content analysis. These resulting cross-linked polymeric membranes showed excellent gas separation performance and can be used for O 2/N 2 and CO 2/N 2 gas pairs, as well as for condensable gases, such as CO 2/CH 4, propylene/propane separation. Most importantly, and differently from typical gas separation membranes derived from glassy polymers, the crosslinked PIMs showed no obvious CO 2 plasticization up to 20 atm pressure of pure CO 2 and CO 2/CH 4 mixtures. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. 3D-QSAR and virtual screening studies of thiazolidine-2,4-dione analogs: Validation of experimental inhibitory potencies towards PIM-1 kinase

    Science.gov (United States)

    Asati, Vivek; Bharti, Sanjay Kumar; Budhwani, Ashok Kumar

    2017-04-01

    The proviral insertion site in moloney murine leukemia virus (PIM) is a family of serine/threonine kinase of Ca2+-calmodulin-dependent protein kinase (CAMK) group which is responsible for the activation and regulation of cellular transcription and translation. The three isoforms of PIM kinase (PIM-1, PIM-2 and PIM-3) share high homology and functional idleness are widely expressed and involved in a variety of biological processes including cell survival, proliferation, differentiation and apoptosis. Altered expression of PIM-1 kinase correlated with hematologic malignancies and solid tumors. In the present study, atom-based 3D-QSAR, docking and virtual screening studies have been performed on a series of thiazolidine-2,4-dione derivatives as PIM-1 kinase inhibitors. 3D-QSAR and docking approach has shortlisted the most active thiazolidine-2,4-dione derivatives such as 28, 31, 33 and 35 with the incorporation of more than one structural feature in a single molecule. External validations by various parameters and molecular docking studies at the active site of PIM-1 kinase have proved the reliability of the developed 3D-QSAR model. The generated pharmacophore (AADHR.33) from 3D-QSAR study was used for screening of drug like compounds from ZINC database, where ZINC15056464 and ZINC83292944 showed potential binding affinities at the active site amino acid residues (LYS67, GLU171, ASP128 and ASP186) of PIM-1 kinase (PDB ID: "pdb:4DTK").

  2. Personal Information Management (PIM: an Introduction

    Directory of Open Access Journals (Sweden)

    Rasoul Zavaraqi

    2012-10-01

    Full Text Available The aim of this paper was to present detailed texts about necessities of personal information management (PIM and has been written by literature survey. Historical investigation of this new born research area showed PIM is an extension to primary personal information management in offices and other bureaucratic centers. PIM is the result of new ICT developments and its followings as information overload and pollution, which is combination of information retrieval, database management systems (DBMS, information science, human-computer interaction, cognitive psychology, and artificial intelligence. The research area tries to address to old challenges by new mechanisms. The paper introduced the new born research area and discussed about its appearance, definitions, history, benefits, performance and researches which has been done about it.

  3. Discovery and optimization of pyrrolo[1,2-a]pyrazinones leads to novel and selective inhibitors of PIM kinases.

    Science.gov (United States)

    Casuscelli, Francesco; Ardini, Elena; Avanzi, Nilla; Casale, Elena; Cervi, Giovanni; D'Anello, Matteo; Donati, Daniele; Faiardi, Daniela; Ferguson, Ronald D; Fogliatto, Gianpaolo; Galvani, Arturo; Marsiglio, Aurelio; Mirizzi, Danilo G; Montemartini, Marisa; Orrenius, Christian; Papeo, Gianluca; Piutti, Claudia; Salom, Barbara; Felder, Eduard R

    2013-12-01

    A novel series of PIM inhibitors was derived from a combined effort in natural product-inspired library generation and screening. The novel pyrrolo[1,2-a]pyrazinones initial hits are inhibitors of PIM isoforms with IC50 values in the low micromolar range. The application of a rational optimization strategy, guided by the determination of the crystal structure of the complex in the kinase domain of PIM1 with compound 1, led to the discovery of compound 15a, which is a potent PIM kinases inhibitor exhibiting excellent selectivity against a large panel of kinases, representative of each family. The synthesis, structure-activity relationship studies, and pharmacokinetic data of compounds from this inhibitor class are presented herein. Furthermore, the cellular activities including inhibition of cell growth and modulation of downstream targets are also described.

  4. Mice deficient for all PIM kinases display reduced body size and impaired responses to hematopoietic growth factors

    NARCIS (Netherlands)

    Mikkers, H; Nawijn, M; Allen, J; Brouwers, C; Verhoeven, E; Jonkers, J; Berns, A

    2004-01-01

    The Pim family of proto-oncogenes encodes a distinct class of serine/threonine kinases consisting of PIM1, PIM2, and PIM3. Although the Pim genes are evolutionarily highly conserved, the contribution of PIM proteins to mammalian development is unclear. PIM1-deficient mice were previously described b

  5. An introduction to the new Productivity Information Management System (PIMS)

    Science.gov (United States)

    Hull, R.

    1982-01-01

    The productivity information management system (PIMS), is described. The main objective of this computerized system is to enable management scientists to interactively explore data concerning DSN operations, maintenance and repairs, to develop and verify models for management planning. The PIMS will provide a powerful set of tools for iteratively manipulating data sets in a wide variety of ways. The initial version of PIMS will be a small scale pilot system. The following topics are discussed: (1) the motivation for developing PIMS; (2) various data sets which will be integrated by PIMS; (3) overall design of PIMS; and (4) how PIMS will be used. A survey of relevant databases concerning DSN operations at Goldstone is also included.

  6. PIMS-Universal Payload Information Management

    Science.gov (United States)

    Elmore, Ralph; McNair, Ann R. (Technical Monitor)

    2002-01-01

    As the overall manager and integrator of International Space Station (ISS) science payloads and experiments, the Payload Operations Integration Center (POIC) at Marshall Space Flight Center had a critical need to provide an information management system for exchange and management of ISS payload files as well as to coordinate ISS payload related operational changes. The POIC's information management system has a fundamental requirement to provide secure operational access not only to users physically located at the POIC, but also to provide collaborative access to remote experimenters and International Partners. The Payload Information Management System (PIMS) is a ground based electronic document configuration management and workflow system that was built to service that need. Functionally, PIMS provides the following document management related capabilities: 1. File access control, storage and retrieval from a central repository vault. 2. Collect supplemental data about files in the vault. 3. File exchange with a PMS GUI client, or any FTP connection. 4. Files placement into an FTP accessible dropbox for pickup by interfacing facilities, included files transmitted for spacecraft uplink. 5. Transmission of email messages to users notifying them of new version availability. 6. Polling of intermediate facility dropboxes for files that will automatically be processed by PIMS. 7. Provide an API that allows other POIC applications to access PIMS information. Functionally, PIMS provides the following Change Request processing capabilities: 1. Ability to create, view, manipulate, and query information about Operations Change Requests (OCRs). 2. Provides an adaptable workflow approval of OCRs with routing through developers, facility leads, POIC leads, reviewers, and implementers. Email messages can be sent to users either involving them in the workflow process or simply notifying them of OCR approval progress. All PIMS document management and OCR workflow controls are

  7. Pim-selective inhibitor DHPCC-9 reveals Pim kinases as potent stimulators of cancer cell migration and invasion

    Directory of Open Access Journals (Sweden)

    Prudhomme Michelle

    2010-10-01

    Full Text Available Abstract Background Pim family kinases are small constitutively active serine/threonine-specific kinases, elevated levels of which have been detected in human hematopoietic malignancies as well as in solid tumours. While we and others have previously shown that the oncogenic Pim kinases stimulate survival of hematopoietic cells, we now examined their putative role in regulating motility of adherent cancer cells. For this purpose, we inhibited Pim kinase activity using a small molecule compound, 1,10-dihydropyrrolo[2,3-a]carbazole-3-carbaldehyde (DHPCC-9, which we had recently identified as a potent and selective inhibitor for all Pim family members. Results We now demonstrate that the Pim kinase inhibitor DHPCC-9 is very effective also in cell-based assays. DHPCC-9 impairs the anti-apoptotic effects of Pim-1 in cytokine-deprived myeloid cells and inhibits intracellular phosphorylation of Pim substrates such as Bad. Moreover, DHPCC-9 slows down migration and invasion of cancer cells derived from either prostate cancer or squamocellular carcinoma patients. Silencing of Pim expression reduces cell motility, while Pim overexpression enhances it, strongly suggesting that the observed effects of DHPCC-9 are dependent on Pim kinase activity. Interestingly, DHPCC-9 also abrogates NFATc-dependent migration of cancer cells, implying that NFATc factors mediate at least part of the pro-migratory effects of Pim kinases. Conclusions Altogether, our data indicate that DHPCC-9 is not only a powerful tool to investigate physiological effects of the oncogenic Pim family kinases, but also an attractive molecule for drug development to inhibit invasiveness of Pim-overexpressing cancer cells.

  8. How Do Organic Vapors Swell Ultra-Thin PIM-1 Films?

    KAUST Repository

    Ogieglo, Wojciech

    2017-06-22

    Dynamic sorption of ethanol and toluene vapor into ultra-thin supported PIM-1 films down to 6 nm are studied with a combination of in-situ spectroscopic ellipsometry and in-situ X-ray reflectivity. Both ethanol and toluene significantly swell the PIM-1 matrix and, at the same time, induce persistent structural relaxations of the frozen-in glassy PIM-1 morphology. For ethanol below 20 nm three effects were identified. First, the swelling magnitude at high vapor pressures is reduced by about 30% as compared to thicker films. Second, at low penetrant activities (below 0.3 p/p0) films below 20 nm are able to absorb slightly more penetrant as compared with thicker films despite similar swelling magnitude. Third, for the ultra-thin films the onset of the dynamic penetrant-induced glass transition Pg has been found to shift to higher values indicating higher resistance to plasticization. All of these effects are consistent with a view where immobilization of the super-glassy PIM-1 at the substrate surface leads to an arrested, even more rigid and plasticization-resistant, yet still very open, microporous structure. PIM-1 in contact with the larger and more condensable toluene shows very complex, heterogeneous swelling dynamics and two distinct penetrant-induced relaxation phenomena, probably associated with the film outer surface and the bulk, are detected. Following the direction of the penetrant\\'s diffusion the surface seems to plasticize earlier than the bulk and the two relaxations remain well separated down to 6 nm film thickness, where they remarkably merge to form just a single relaxation.

  9. Clinical and biological significance of PIM1 kinase in osteosarcoma.

    Science.gov (United States)

    Liao, Yunfei; Feng, Yong; Shen, Jacson; Gao, Yan; Cote, Gregory; Choy, Edwin; Harmon, David; Mankin, Henry; Hornicek, Francis; Duan, Zhenfeng

    2016-07-01

    Osteosarcoma is the most prevalent histological form of primary malignant bone tumor. The majority of osteosarcoma patients have limited alternative therapeutic options and metastatic patients generally have a poor prognosis. Proto-oncogene serine/threonine-protein kinase PIM1 is associated with growth and survival of many kinds of tumor cells. However, the role of PIM1 in osteosarcoma remains largely unknown. In this study, we investigated the functional and therapeutic relevance of PIM1 as a putative target in osteosarcoma. We found PIM1 was highly expressed in various osteosarcoma cell lines and in tumor tissues from osteosarcoma patients. Tissue microarray and immunohistochemistry analysis showed that the overall and disease-free survival rate of patients with high levels of PIM1 protein expression were significantly shorter than patients with low levels. High levels of PIM1 were also associated with present metastasis and can be considered as an independent prognostic factor in osteosarcoma patients. Knockdown of PIM1 expression by synthetic siRNA or shRNA greatly inhibited cell growth, migration, and invasion. Moreover, these changes accompanied with down-regulation of anti-apoptotic protein Bcl-2. The similar results were obtained in osteosarcoma cells treated with PIM1 specific inhibitor (SMI-4a). These results suggest that PIM1 kinase is critical for the growth and metastasis of osteosarcoma cells and can be a potential therapeutic target for osteosarcoma treatment. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1185-1194, 2016. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  10. HiPIMS: a New Generation of Film Deposition Techniques for SRF Applications

    Energy Technology Data Exchange (ETDEWEB)

    Valente-Feliciano, Anne-Marie [JLAB

    2013-09-01

    Over the years, Nb/Cu technology, despite its shortcomings due to the commonly used magnetron sputtering, has positioned itself as an alternative route for the future of accelerator superconducting structures. Avenues for the production of thin films tailored for Superconducting RF (SRF) applications are showing promise with recent developments in ionized PVD coating techniques, i.e. vacuum deposition techniques using energetic ions. Among these techniques, High power impulse magnetron sputtering (HiPIMS) is a promising emerging technique which combines magnetron sputtering with a pulsed power approach. This contribution describes the benefits of energetic condensation for SRF films and the characteristics of the HiPIMS technology. It describes the on-going efforts pursued in different institutions to exploit the potential of this technology to produce bulk-like Nb films and go beyond Nb performance with the development of film systems, based on other superconducting materials and multilayer structures.

  11. The human protooncogene product p33pim is expressed during fetal hematopoiesis and in diverse leukemias.

    OpenAIRE

    Amson, R; Sigaux, F; Przedborski, S; Flandrin, G; Givol, D; Telerman, A

    1989-01-01

    We measured the human pim-1 protooncogene (PIM) expression during fetal development and in hematopoietic malignancies. Our data indicate that during human fetal hematopoiesis the 33-kDa pim product, p33pim, is highly expressed in the liver and spleen. In contrast, at the adult stage it is only slightly expressed in circulating granulocytes. Out of 70 hematopoietic malignancies analyzed, 51 patients and 19 cell lines, p33pim was overexpressed in approximately 30% of the samples, particularly i...

  12. Discovery of 3H-Benzo[4,5]thieno[3,2-d]pyrimidin-4-ones as Potent, Highly Selective, and Orally Bioavailable Inhibitors of the Human Protooncogene Proviral Insertion Site in Moloney Murine Leukemia Virus (PIM) Kinases

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Zhi-Fu; Hasvold, Lisa A.; Leverson, Joel D.; Han, Edward K.; Guan, Ran; Johnson, Eric F.; Stoll, Vincent S.; Stewart, Kent D.; Stamper, Geoff; Soni, Nirupama; Bouska, Jennifer J.; Luo, Yan; Sowin, Thomas J.; Lin, Nan-Horng; Giranda, Vincent S.; Rosenberg, Saul H.; Penning, Thomas D.; (Abbott)

    2010-02-19

    Pim-1, Pim-2, and Pim-3 are a family of serine/threonine kinases which have been found to be overexpressed in a variety of hematopoietic malignancies and solid tumors. Benzothienopyrimidinones were discovered as a novel class of Pim inhibitors that potently inhibit all three Pim kinases with subnanomolar to low single-digit nanomolar K{sub i} values and exhibit excellent selectivity against a panel of diverse kinases. Protein crystal structures of the bound Pim-1 complexes of benzothienopyrimidinones 3b (PDB code 3JYA), 6e (PDB code 3JYO), and 12b (PDB code 3JXW) were determined and used to guide SAR studies. Multiple compounds exhibited potent antiproliferative activity in K562 and MV4-11 cells with submicromolar EC{sub 50} values. For example, compound 14j inhibited the growth of K562 cells with an EC{sub 50} value of 1.7 {micro}M and showed K{sub i} values of 2, 3, and 0.5 nM against Pim-1, Pim-2, and Pim-3, respectively. These novel Pim kinase inhibitors efficiently interrupted the phosphorylation of Bad in both K562 and LnCaP-Bad cell lines, indicating that their potent biological activities are mechanism-based. The pharmacokinetics of 14j was studied in CD-1 mice and shown to exhibit bioavailability of 76% after oral dosing. ADME profiling of 14j suggested a long half-life in both human and mouse liver microsomes, good permeability, modest protein binding, and no CYP inhibition below 20 {micro}M concentration.

  13. Recent advances in PIM technology I

    Directory of Open Access Journals (Sweden)

    Zlatkov B.S.

    2008-01-01

    Full Text Available In this article the state of art of the PIM (Powder Injection Moulding technology is given in brief. The main process flow diagram consisting of four steps: feedstock preparation, injection moulding (green samples forming, the debinding (binder removing procedure and the sintering process was described. After that the materials for binders and additives for the surface active agents were mentioned in brief. The metal injection moulding (MIM process was analysed in more detail: MIM- stainless steels, MIM-copper and MIM-aluminium as the most metals common in MIM metal parts production. After that our results of MIM stainless steel 316 L and MIM copper are given. The main powder characteristics, the shrinkage and density of the sintered samples were compared for isostatically pressed PM (powder metallurgy samples and MIM formed samples. The SEM fractographs of MIM and PM samples are given for MIM green parts, debinded (brown parts and sintered parts, and PM green parts and sintered parts. The results obtained were compared with literature data before they were applied in metal parts production.

  14. Design and synthesis of substituted pyrido[3,2-d]-1,2,3-triazines as potential Pim-1 inhibitors.

    Science.gov (United States)

    Fan, Yin-Bo; Li, Kun; Huang, Min; Cao, Yu; Li, Ying; Jin, Shu-Yu; Liu, Wen-Bing; Wen, Jia-Chen; Liu, Dan; Zhao, Lin-Xiang

    2016-02-15

    A novel series of substituted pyrido[3,2-d]-1,2,3-triazines were designed and synthesized as Pim-1 inhibitors through scaffold hopping. Most of the derivatives showed potent in vitro Pim-1 inhibitory activities and anti-proliferative effects toward prostate cancer cells. Among them, 6b, 6h and 6m showed the best Pim-1 inhibitory activity with IC50 values of 0.69, 0.60 and 0.80 μM, respectively. Furthermore, compounds 6b, 6i, 6j and 6m showed strong inhibitory activity to human prostate cancer LNcap and PC-3 cell lines with IC50 values at low micromolar level. Structure-activity relationship analysis revealed that appropriate substitutions at C-6 positions contributed to the kinase inhibition and antiproliferative effects. Moreover, western blot assay suggested that 6j could decrease the levels of p-BAD and p-4E-BP1 in a dose-dependent manner in PC-3 cells. Docking studies showed that 3-N of the scaffold formed a hydrogen bond with Lys67, aromatic 4-aniline formed a key π-π stack with Phe49. Taken together, this study might provide the first sight for developing the pyrido[3,2-d]-1,2,3-triazine scaffold as novel Pim-1 inhibitors.

  15. The Plasma Instrument for Magnetic Sounding (PIMS) for the Europa Mission

    Science.gov (United States)

    Westlake, J. H.; McNutt, R. L.; Kasper, J. C.; Case, A. W.; Rymer, A. M.; Stevens, M. L.; Jia, X.; Paty, C.; Khurana, K. K.; Kivelson, M. G.; Slavin, J. A.; Smith, H. T.; Korth, H.; Krupp, N.; Roussous, E.; Saur, J.

    2016-10-01

    We present the Plasma Instrument for Magnetic Sounding (PIMS) selected for the Europa Mission. We specifically address how PIMS plasma measurements will improve the accuracy of magnetic sounding of Europa's subsurface ocean.

  16. Less is more: a project to reduce the number of PIMs (potentially inappropriate medications) on an elderly care ward

    Science.gov (United States)

    Aung, Tin Htun; Judith Beck, Adèle; Siese, Thomas; Berrisford, Richard

    2016-01-01

    Potentially inappropriate prescribing in healthcare of the elderly (HCE) is associated with avoidable adverse drug events (ADEs).1,2 A recent set of prescribing criteria has been designed and validated, called “Screening Tool of Older Persons' Prescriptions” (STOPP), to rationalise prescribing in hospitalised patients on HCE wards.1,3 The aim of this quality improvement project was to identify how many potentially inappropriate medications (PIMs) were prescribed on these wards, and remove them. This was executed by implementing a ward round checklist, which incorporated STOPP criteria, for the twice weekly, consultant led ward rounds. This quality improvement project was carried out over four months. In a pilot study, we identified eight inappropriate medical prescriptions among 148 medications (5.4% ) prescribed on one ward. After applying a checklist for a structured ward round, we reviewed the medications prescribed on that ward, and found 10 PIMs out of 192 (5.2% ). Utilising the increasingly recognised “plan, do, study, act” (PDSA) cycle,4 we implemented departmental teaching and meetings with other members of the multidisciplinary team, which raised awareness of PIMs among junior doctors, as well as involving our pharmacists in drug chart screening. During this process we continued with a further six cycles on a bi-weekly basis, and saw a gradual decrease in PIM to 1.5%. In conclusion, a structured ward round, facilitated by a checklist that included review of drug charts based on STOPP criteria, demonstrated a considerable reduction of PIMs. It would be interesting to apply this quality improvement project to non-HCE wards, including general surgical wards or adult psychiatry wards, as a means of not only reducing the effects of ADEs, but also the expenditure associated with unnecessary drug prescriptions, and the costs associated with additional care arising from associated ADEs. PMID:27096089

  17. Pim-1: A Molecular Target to Modulate Cellular Resistance to Therapy in Prostate Cancer

    Science.gov (United States)

    2007-10-01

    oligonucleotide blocks pim1 increase after docetaxel treatment PIM1 pStat3 Total Stat3 Oligo M WT M WT Tax 0 + 0 + Fig...or with three other flavonoids , has been determined. We have also shown that quercetagetin is able to inhibit the activity of the PIM1 kinase in...companion article, presenting a pharmacophore analysis of flavonoid inhibitors of PIM1, has also been published recently (2; see appendix B). We have

  18. Application of PIMS Software in Monthly Planning of Refinery Production

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    This article describes the application of the PIMS software in formulating monthly refining production plan. Application of the PIMS software can help to solve a series of problems related with monthly plan of refining production such as optimized selection of crude and feedstocks, optimized selection of production scale and processing scheme, identification of bottlenecks and their mitigation,optimized selection of turnaround time and optimized selection of operating regime, which have increased the economic benefits of refining enterprises. With the further development and improvement of models the PIMS software will play an increasingly important role in formulating monthly plans of refining operations and production management at refineries. This article also explores the problems existing in refinery monthly planning, and has made recommendations on developing and improving models and reporting system, enhancement of basic data acquisition, model maintenance personnel and staff training.

  19. Expression, purification, crystallization and preliminary crystallographic analysis of human Pim-1 kinase

    Energy Technology Data Exchange (ETDEWEB)

    Qian, Kevin C., E-mail: kqian@rdg.boehringer-ingelheim.com [Department of Medicinal Chemistry, Boehringer Ingelheim Pharmaceuticals Inc., Research and Development, 175 Briar Ridge Road, Ridgefield, CT 06877 (United States); Studts, Joey; Wang, Lian; Barringer, Kevin; Kronkaitis, Anthony; Peng, Charline; Baptiste, Alistair; LaFrance, Roger; Mische, Sheenah [Department of Immunology and Inflammation, Boehringer Ingelheim Pharmaceuticals Inc., Research and Development, 175 Briar Ridge Road, Ridgefield, CT 06877 (United States); Farmer, Bennett [Department of Medicinal Chemistry, Boehringer Ingelheim Pharmaceuticals Inc., Research and Development, 175 Briar Ridge Road, Ridgefield, CT 06877 (United States)

    2005-01-01

    Pim kinases, belong to a distinctive serine/threonine protein-kinase family and are involved in cytokine-induced signal transduction and the development of lymphoid malignancies. Human Pim-1 kinase has been cloned, expressed and crystallized Pim kinases, including Pim-1, Pim-2 and Pim-3, belong to a distinctive serine/threonine protein-kinase family. They are involved in cytokine-induced signal transduction and the development of lymphoid malignancies. Their kinase domains are highly homologous to one another, but share low sequence identity to other kinases. Specifically, there are two proline residues in the conserved hinge-region sequence ERPXPX separated by a residue that is non-conserved among Pim kinases. Full-length human Pim-1 kinase (1–313) was cloned and expressed in Escherichia coli as a GST-fusion protein and truncated to Pim-1 (14–313) by thrombin digestion during purification. The Pim-1 (14–313) protein was purified to high homogeneity and monodispersity. This protein preparation yielded small crystals in the initial screening and large crystals after optimization. The large crystals of apo Pim-1 enzyme diffracted to 2.1 Å resolution and belong to space group P6{sub 5}, with unit-cell parameters a = b = 95.9, c = 80.0 Å, β = 120° and one molecule per asymmetric unit.

  20. PIM kinases as potential therapeutic targets in a subset of peripheral T cell lymphoma cases.

    Directory of Open Access Journals (Sweden)

    Esperanza Martín-Sánchez

    Full Text Available Currently, there is no efficient therapy for patients with peripheral T cell lymphoma (PTCL. The Proviral Integration site of Moloney murine leukemia virus (PIM kinases are important mediators of cell survival. We aimed to determine the therapeutic value of PIM kinases because they are overexpressed in PTCL patients, T cell lines and primary tumoral T cells. PIM kinases were inhibited genetically (using small interfering and short hairpin RNAs and pharmacologically (mainly with the pan-PIM inhibitor (PIMi ETP-39010 in a panel of 8 PTCL cell lines. Effects on cell viability, apoptosis, cell cycle, key proteins and gene expression were evaluated. Individual inhibition of each of the PIM genes did not affect PTCL cell survival, partially because of a compensatory mechanism among the three PIM genes. In contrast, pharmacological inhibition of all PIM kinases strongly induced apoptosis in all PTCL cell lines, without cell cycle arrest, in part through the induction of DNA damage. Therefore, pan-PIMi synergized with Cisplatin. Importantly, pharmacological inhibition of PIM reduced primary tumoral T cell viability without affecting normal T cells ex vivo. Since anaplastic large cell lymphoma (ALK+ ALCL cell lines were the most sensitive to the pan-PIMi, we tested the simultaneous inhibition of ALK and PIM kinases and found a strong synergistic effect in ALK+ ALCL cell lines. Our findings suggest that PIM kinase inhibition could be of therapeutic value in a subset of PTCL, especially when combined with ALK inhibitors, and might be clinically beneficial in ALK+ ALCL.

  1. Functional Role and Therapeutic Potential of the Pim-1 Kinase in Colon Carcinoma

    Directory of Open Access Journals (Sweden)

    Ulrike Weirauch

    2013-07-01

    Full Text Available PURPOSE: The provirus integration site for Moloney murine leukemia virus 1 (Pim-1 kinase is overexpressed in various tumors and has been linked to poor prognosis. Its role as proto-oncogene is based on several Pim-1 target proteins involved in pivotal cellular processes. Here, we explore the functional relevance of Pim-1 in colon carcinoma. EXPERIMENTAL DESIGN: RNAi-based knockdown approaches, as well as a specific small molecule inhibitor, were used to inhibit Pim-1 in colon carcinoma cells. The effects were analyzed regarding proliferation, apoptosis, sensitization toward cytostatic treatment, and overall antitumor effect in vitro and in mouse tumor models in vivo. RESULTS: We demonstrate antiproliferative, proapoptotic, and overall antitumor effects of Pim-1 inhibition. The sensitization to 5-fluorouracil (5-FU treatment upon Pim-1 knockdown offers new possibilities for combinatorial treatment approaches. Importantly, this also antagonizes a 5-FU-triggered Pim-1 up-regulation, which is mediated by decreased levels of miR-15b, a microRNA we newly identify to regulate Pim-1. The analysis of the molecular effects of Pim-1 inhibition reveals a complex regulatory network, with therapeutic Pim-1 repression leading to major changes in oncogenic signal transduction with regard to p21Cip1/WAF1, STAT3, c-jun-N-terminal kinase (JNK, c-Myc, and survivin and in the levels of apoptosis-related proteins Puma, Bax, and Bcl-xL. CONCLUSIONS: We demonstrate that Pim-1 plays a pivotal role in several tumor-relevant signaling pathways and establish the functional relevance of Pim-1 in colon carcinoma. Our results also substantiate the RNAi-mediated Pim-1 knockdown based on polymeric polyethylenimine/ small interfering RNA nanoparticles as a promising therapeutic approach.

  2. Gas transport behavior of mixed-matrix membranes composed of silica nanoparticles in a polymer of intrinsic microporosity (PIM-1)

    KAUST Repository

    Ahn, Juhyeon

    2010-01-01

    Recently, high-free volume, glassy ladder-type polymers, referred to as polymers of intrinsic microporosity (PIM), have been developed and their reported gas transport performance exceeded the Robeson upper bound trade-off for O2/N2 and CO2/CH4. The present work reports the gas transport behavior of PIM-1/silica nanocomposite membranes. The changes in free volume, as well as the presence and volume of the void cavities, were investigated by analyzing the density, thermal stability, and nano-structural morphology. The enhancement in gas permeability (e.g., He, H2, O2, N2, and CO2) with increasing filler content shows that the trend is related to the true silica volume and void volume fraction. Crown Copyright © 2009.

  3. Nuclear PIM1 confers resistance to rapamycin-impaired endothelial proliferation

    Energy Technology Data Exchange (ETDEWEB)

    Walpen, Thomas; Kalus, Ina [Research Unit, Division Internal Medicine, University Hospital Zuerich, 8091 Zuerich (Switzerland); Schwaller, Juerg [Department of Biomedicine, University of Basel, 4031 Basel (Switzerland); Peier, Martin A. [Research Unit, Division Internal Medicine, University Hospital Zuerich, 8091 Zuerich (Switzerland); Battegay, Edouard J. [Research Unit, Division Internal Medicine, University Hospital Zuerich, 8091 Zuerich (Switzerland); Zurich Center for Integrative Human Physiology (ZIHP), 8057 Zuerich (Switzerland); Humar, Rok, E-mail: Rok.Humar@usz.ch [Research Unit, Division Internal Medicine, University Hospital Zuerich, 8091 Zuerich (Switzerland); Zurich Center for Integrative Human Physiology (ZIHP), 8057 Zuerich (Switzerland)

    2012-12-07

    Highlights: Black-Right-Pointing-Pointer Pim1{sup -/-} endothelial cell proliferation displays increased sensitivity to rapamycin. Black-Right-Pointing-Pointer mTOR inhibition by rapamycin enhances PIM1 cytosolic and nuclear protein levels. Black-Right-Pointing-Pointer Truncation of Pim1 beyond serine 276 results in nuclear localization of the kinase. Black-Right-Pointing-Pointer Nuclear PIM1 increases endothelial proliferation independent of rapamycin. -- Abstract: The PIM serine/threonine kinases and the mTOR/AKT pathway integrate growth factor signaling and promote cell proliferation and survival. They both share phosphorylation targets and have overlapping functions, which can partially substitute for each other. In cancer cells PIM kinases have been reported to produce resistance to mTOR inhibition by rapamycin. Tumor growth depends highly on blood vessel infiltration into the malignant tissue and therefore on endothelial cell proliferation. We therefore investigated how the PIM1 kinase modulates growth inhibitory effects of rapamycin in mouse aortic endothelial cells (MAEC). We found that proliferation of MAEC lacking Pim1 was significantly more sensitive to rapamycin inhibition, compared to wildtype cells. Inhibition of mTOR and AKT in normal MAEC resulted in significantly elevated PIM1 protein levels in the cytosol and in the nucleus. We observed that truncation of the C-terminal part of Pim1 beyond Ser 276 resulted in almost exclusive nuclear localization of the protein. Re-expression of this Pim1 deletion mutant significantly increased the proliferation of Pim1{sup -/-} cells when compared to expression of the wildtype Pim1 cDNA. Finally, overexpression of the nuclear localization mutant and the wildtype Pim1 resulted in complete resistance to growth inhibition by rapamycin. Thus, mTOR inhibition-induced nuclear accumulation of PIM1 or expression of a nuclear C-terminal PIM1 truncation mutant is sufficient to increase endothelial cell proliferation

  4. Tuning PIM-PI-Based Membranes for Highly Selective Transport of Propylene/Propane

    KAUST Repository

    Swaidan, Ramy J.

    2016-12-06

    To date there exists a great deal of energetic and economic inefficiency in the separation of olefins from paraffins because the principal means of achieving industrial purity requirements is accomplished with very energy intensive cryogenic distillation. Mitigation of the severe energy intensity of the propylene/propane separation has been identified as one of seven chemical separations which can change the landscape of global energy use, and membranes have been targeted as an emerging technology because they offer scalability and lower capital and operating costs. The focus of this work was to evaluate a new direction of material development for the very industrially relevant propylene/propane separation using membranes. The objective was to develop a rational design approach for generating highly selective membranes using a relatively new platform of materials known as polyimides of intrinsic microporosity (PIM-PIs), the prospects of which have never been examined for the propylene/propane separation. Structurally, PIMs comprise relatively inflexible macromolecular architectures integrating contortion sites that help disrupt packing and trap microporous free volume elements (< 20 Å). To date most of the work reported in the literature on this separation is based on conventional low free volume 6FDA-based polyimides which in the best case show moderate C3H6/C3H8 selectivities (<20) with C3H6 permeabilities too low to garner industrial interest. Due to propylene and propane’s relatively large molecular size, we hypothesized that the use of more open structures can provide greater accessibility to the pores necessary to enhance membrane sieving and flux. It has been shown for numerous key gas separations that introduction of microporosity into a polymer structure can defy the notorious permeability/selectivity tradeoff curve and induce simultaneous boosts in both permeability and selectivity. The cornerstone approach to designing state of the art high

  5. Phosphorylation of the androgen receptor by PIM1 in hormone refractory prostate cancer.

    Science.gov (United States)

    Ha, S; Iqbal, N J; Mita, P; Ruoff, R; Gerald, W L; Lepor, H; Taneja, S S; Lee, P; Melamed, J; Garabedian, M J; Logan, S K

    2013-08-22

    Integration of cellular signaling pathways with androgen receptor (AR) signaling can be achieved through phosphorylation of AR by cellular kinases. However, the kinases responsible for phosphorylating the AR at numerous sites and the functional consequences of AR phosphorylation are only partially understood. Bioinformatic analysis revealed AR serine 213 (S213) as a putative substrate for PIM1, a kinase overexpressed in prostate cancer. Therefore, phosphorylation of AR serine 213 by PIM1 was examined using a phosphorylation site-specific antibody. Wild-type PIM1, but not catalytically inactive PIM1, specifically phosphorylated AR but not an AR serine-to-alanine mutant (S213A). In vitro kinase assays confirmed that PIM1 can phosphorylate AR S213 in a ligand-independent manner and cell type-specific phosphorylation was observed in prostate cancer cell lines. Upon PIM1 overexpression, AR phosphorylation was observed in the absence of hormone and was further increased in the presence of hormone in LNCaP, LNCaP-abl and VCaP cells. Moreover, phosphorylation of AR was reduced in the presence of PIM kinase inhibitors. An examination of AR-mediated transcription showed that reporter gene activity was reduced in the presence of PIM1 and wild-type AR, but not S213A mutant AR. Androgen-mediated transcription of endogenous PSA, Nkx3.1 and IGFBP5 was also decreased in the presence of PIM1, whereas IL6, cyclin A1 and caveolin 2 were increased. Immunohistochemical analysis of prostate cancer tissue microarrays showed significant P-AR S213 expression that was associated with hormone refractory prostate cancers, likely identifying cells with catalytically active PIM1. In addition, prostate cancers expressing a high level of P-AR S213 were twice as likely to be from biochemically recurrent cancers. Thus, AR phosphorylation by PIM1 at S213 impacts gene transcription and is highly prevalent in aggressive prostate cancer.

  6. Implications of promiscuous Pim-1 kinase fragment inhibitor hydrophobic interactions for fragment-based drug design.

    Science.gov (United States)

    Good, Andrew C; Liu, Jinyu; Hirth, Bradford; Asmussen, Gary; Xiang, Yibin; Biemann, Hans-Peter; Bishop, Kimberly A; Fremgen, Trisha; Fitzgerald, Maria; Gladysheva, Tatiana; Jain, Annuradha; Jancsics, Katherine; Metz, Markus; Papoulis, Andrew; Skerlj, Renato; Stepp, J David; Wei, Ronnie R

    2012-03-22

    We have studied the subtleties of fragment docking and binding using data generated in a Pim-1 kinase inhibitor program. Crystallographic and docking data analyses have been undertaken using inhibitor complexes derived from an in-house surface plasmon resonance (SPR) fragment screen, a virtual needle screen, and a de novo designed fragment inhibitor hybrid. These investigations highlight that fragments that do not fill their binding pocket can exhibit promiscuous hydrophobic interactions due to the lack of steric constraints imposed on them by the boundaries of said pocket. As a result, docking modes that disagree with an observed crystal structure but maintain key crystallographically observed hydrogen bonds still have potential value in ligand design and optimization. This observation runs counter to the lore in fragment-based drug design that all fragment elaboration must be based on the parent crystal structure alone.

  7. Storing Personal Information Management data: Akonadi - unifying PIM data for KDE

    NARCIS (Netherlands)

    Zwerus, R.

    2007-01-01

    Storing Personal Information Management (PIM) data is not trivial, because of the variety in content types. Existing PIM storage systems have shortcomings in performance, data concistency and/or concurrency. In this thesis, we propose several optimisations and test them in Akonadi, KDE’s new central

  8. For better or for worse : the role of Pim oncogenes in tumorigenesis

    NARCIS (Netherlands)

    Nawijn, Martijn C.; Alendar, Andrej; Berns, Anton

    2011-01-01

    Pim oncogenes are overexpressed in a wide range of tumours from a haematological and epithelial origin. Pim genes encode serine/threonine kinases that have been shown to counteract the increased sensitivity to apoptosis induction that is associated with MYC-driven tumorigenesis. Recently, considerab

  9. Exploring New Potentials of Blogs for Learning: Can Children Use Blogs for Personal Information Management (PIM)?

    Science.gov (United States)

    Yeo, Hwan-Ik; Lee, Yekyung Lisa

    2014-01-01

    This study explores the use of blogs for personal information management (PIM) as a learning tool that could bring increased efficiency and academic self-efficacy for carrying out learning tasks. In order to identify the uses and effects of using blogs for PIM by children, a control group that used personal spaces within the class website and an…

  10. Inhibition of Pim-1 attenuates the proliferation and migration in nasopharyngeal carcinoma cells

    Institute of Scientific and Technical Information of China (English)

    Wei Jie; Qi-Yi He; Bo-Tao Luo; Shao-Jiang Zheng; Yue-Qiong Kong; Han-Guo Jiang; Ru-Jia Li; Jun-Li Guo; Zhi-Hua Shen

    2012-01-01

    Objective:To explore the role of proto-oncogenePim-1 in the proliferation and migration of nasopharyngeal carcinoma(NPC) cells.Methods:Pim-1 expressions inNPC cell lines CNE1,CNE1-GL,CNE-2Z andC666-1 were examined byRT-PCR, western blotting and immunoflucesence, respectively.AfterCNE1,CNE1-GL andC666-1 cells were treated with different concentrations ofPim-1 special inhibitor, quercetagetin, the cell viability, colony formation rate and migration ability were analyzed.Results:Pim-1 expression was negative in well-differentiatedCNE1 cells, whereas expressed weakly positive in poor-differentiated CNE-2Z cells and strongly positive in undifferentiatedC666-1 cells.Interestingly,CNE1-GL cells that derived fromCNE1 transfected with anEpsteinBarr virus latent membrane protein-1 over-expression plasmid displayed stronger expression ofPim-1.Treatment ofCNE1-GL and C666-1 cells with quercetagetin significantly decreased the cell viability, colony formation rate and migration ability but not theCNE1 cells.Conclusions:These findings suggest thatPim-1 overexpression contributes toNPC proliferation and migration, and targetingPim-1 may be a potential treatment for anti-Pim-1-expressedNPCs.

  11. DMPD: The serine/threonine kinase Pim-1. [Dynamic Macrophage Pathway CSML Database

    Lifescience Database Archive (English)

    Full Text Available 15694833 The serine/threonine kinase Pim-1. Bachmann M, Moroy T. Int J Biochem Cell... Biol. 2005 Apr;37(4):726-30. (.png) (.svg) (.html) (.csml) Show The serine/threonine kinase Pim-1. PubmedID 15694833 Title The

  12. Holding Pressure and Its Influence on Quality in PIM Technology

    Directory of Open Access Journals (Sweden)

    Pavel Petera

    2012-01-01

    Full Text Available The PIM (powder injection molding process consists of several steps in which faults can occur. The quality of the part that is produced usually cannot be seen until the end of the process. It is therefore necessary to find a way to discover the fault earlier in the process. The cause of defects is very often “phase separation” (inhomogeneity in powder distribution, which can also be influenced by the holding pressure. This paper evaluates the powder distribution with a new method based on density measurement. Measurements were made using various holding pressure values.

  13. Cuestiones pendientes en la metodología PIMS: un breve recuento Pending question about the PIMS methodology: a brief account

    Directory of Open Access Journals (Sweden)

    Rubén M. Mosqueda Almanza

    2010-06-01

    Full Text Available Se asume que una estrategia adecuada impactara positivamente las ganancias de la empresa y le llevara a expandirse. Recientes descubrimientos sugieren que solo con la revisión y adecuación de los elementos mas relevantes del plan estratégico es posible llevar los resultados económicos de la empresa a un punto optimo. La metodología PIMS (que se traduce como Impacto de la Estrategia de Marketing sobre las Ganancias constituye un modelo para lograrlo, sin embargo, subsisten problemas fundamentales en el mismo modelo que lo limitan. Así, en el presente trabajo se hace un estudio exploratorio y se muestra la evolución de la metodología PIMS lo cual permite desvelar los retos y el posible rumbo del tema. La definición de la estrategia, el diseño de la encuesta tipo PIMS, los problemas de multicolinearidad y el efecto de la participación de mercado se plantean como los mas relevantes. Los resultados muestran la necesidad de definir con precisión la estrategia asumida por la empresa, el rediseño de la encuesta PIMS cuando se aplique a mercados incompletos y finalmente, se advierte un avance en el estudio econométrico sobre la metodología PIMS con énfasis en la variable Calidad Relativa del Producto para resolver el viejo dilema del efecto de la participación de mercado.We can assume that an appropriate strategy will have a positive impact on profits and it will contribute to having a company’s market share grow. Recent findings suggest that only the adaptation of a strategic plan can bring a company to perform at optimum levels. PIMS is an archetypical model to achieve that, but fundamental problems remain that limit it. This paper shows the evolution of the PIMS methodology and reveals its challenges and possible development. The adequate definition of this strategy, the redesign of the questionnaire PIMS, problems of Multicollinearity and the Market Share Effect would be the most relevant problems that this paper will address. The

  14. Scaling to Nanotechnology Limits with the PIMS Computer Architecture and a new Scaling Rule

    Energy Technology Data Exchange (ETDEWEB)

    Debenedictis, Erik P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    We describe a new approach to computing that moves towards the limits of nanotechnology using a newly formulated sc aling rule. This is in contrast to the current computer industry scali ng away from von Neumann's original computer at the rate of Moore's Law. We extend Moore's Law to 3D, which l eads generally to architectures that integrate logic and memory. To keep pow er dissipation cons tant through a 2D surface of the 3D structure requires using adiabatic principles. We call our newly proposed architecture Processor In Memory and Storage (PIMS). We propose a new computational model that integrates processing and memory into "tiles" that comprise logic, memory/storage, and communications functions. Since the programming model will be relatively stable as a system scales, programs repr esented by tiles could be executed in a PIMS system built with today's technology or could become the "schematic diagram" for implementation in an ultimate 3D nanotechnology of the future. We build a systems software approach that offers advantages over and above the technological and arch itectural advantages. Firs t, the algorithms may be more efficient in the conventional sens e of having fewer steps. Second, the algorithms may run with higher power efficiency per operation by being a better match for the adiabatic scaling ru le. The performance analysis based on demonstrated ideas in physical science suggests 80,000 x improvement in cost per operation for the (arguably) gene ral purpose function of emulating neurons in Deep Learning.

  15. Scaling to Nanotechnology Limits with the PIMS Computer Architecture and a new Scaling Rule.

    Energy Technology Data Exchange (ETDEWEB)

    Debenedictis, Erik

    2015-02-01

    We describe a new approach to computing that moves towards the limits of nanotechnology using a newly formulated sc aling rule. This is in contrast to the current computer industry scali ng away from von Neumann's original computer at the rate of Moore's Law. We extend Moore's Law to 3D, which l eads generally to architectures that integrate logic and memory. To keep pow er dissipation cons tant through a 2D surface of the 3D structure requires using adiabatic principles. We call our newly proposed architecture Processor In Memory and Storage (PIMS). We propose a new computational model that integrates processing and memory into "tiles" that comprise logic, memory/storage, and communications functions. Since the programming model will be relatively stable as a system scales, programs repr esented by tiles could be executed in a PIMS system built with today's technology or could become the "schematic diagram" for implementation in an ultimate 3D nanotechnology of the future. We build a systems software approach that offers advantages over and above the technological and arch itectural advantages. Firs t, the algorithms may be more efficient in the conventional sens e of having fewer steps. Second, the algorithms may run with higher power efficiency per operation by being a better match for the adiabatic scaling ru le. The performance analysis based on demonstrated ideas in physical science suggests 80,000 x improvement in cost per operation for the (arguably) gene ral purpose function of emulating neurons in Deep Learning.

  16. PIM-SM Based Multicast Security%基于PIM-SM协议IP组播安全技术

    Institute of Scientific and Technical Information of China (English)

    黄舒; 董喜明; 郭云峰

    2014-01-01

    With the rapid development of the network technology, more bandwidth is required. Multicast transmission offers efficient network resource consumption. Multicast security is a hot issue. Multicast security problem hinders the development of multicast technology. This paper discusses the principles of multicast protocol PIM-SM and makes a detailed description of a method to prevent vicious multicast source attacking. The method can improve the reliability of multicast system.%伴随着互联网的高速发展, Internet 上涌现了许多需要高带宽支持的应用。组播技术能有效的利用网络带宽资源。组播的安全性一直是一个热点问题,也是阻碍组播发展的一个主要问题。本文针对虚假组播源产生垃圾消息恶性攻击提出了一个基于 PIM-SM 组播协议的预防方案,实验结果表明,该方案能提高组播系统的可靠性。

  17. Band gap and transmission properties of one dimensional photonic crystals with NIM-PIM alternant structure%一维正负折射率光子晶体结构禁带及传播特性

    Institute of Scientific and Technical Information of China (English)

    刘名扬; 贺珍妮; 张向东

    2013-01-01

    Transfer matrix method is used to analyze the transmission spectra of one dimensional photon-ic crystals with negative refractive index material and positive refractive index material alternant struc-ture .The bang gaps and dispersive relation of one dimensional photonic crystal are analyzed .The gener-al Bragg gaps and the resonant gap of low frequency exist in the photonic crystal .We also research local-ization of electromagnetic waves in one-dimension random system containing the left-handed material .%采用传递矩阵的方法研究了由正折射率材料和负折射率材料交替排列组成的一维光子晶体结构的透射谱,并对其能带结构和色散关系进行分析,这种正负折射率光子晶体不仅存在一般的布拉格禁带,还存在低频共振禁带。本文也对含左手材料的一维无序结构的局域化进行了分析研究。

  18. Planar Integrated Magnetics (PIM) Module in Hybrid Bidirectional DC-DC Converter for Fuel Cell Application

    DEFF Research Database (Denmark)

    Ouyang, Ziwei; Zhang, Zhe; Thomsen, Ole Cornelius

    2011-01-01

    , hereby increasing the power density of converters. In this paper, a new planar integrated magnetics (PIM) module for a phase-shift plus duty cycle controlled hybrid bi-directional dc-dc converter is proposed, which assembles one boost inductor and two transformers into an E-I-E core geometry, reducing...... and theoretical analysis, a lab prototype employing the PIM module is implemented for a fuel cell application with 20~40 V input voltage and 400 V output voltage. Detailed results from the experimental comparisons demonstrate that the PIM module is fully functional and electromagnetically equivalent...

  19. Efektivitas Layanan Weekend Banking (Studi BMI KCP PIM .

    Directory of Open Access Journals (Sweden)

    Rifa Farhah

    2014-01-01

    Full Text Available The Effectiveness of Weekend Banking Services (Study at BMI KCP PIM. The aim of this research is to analyze the effectiveness of weekend banking services at Bank Muamalat Indonesia. The method that used in this research is linier regression and. The result shown that the value of adjusted R-squared was 0.313409. It means that customer’s preference (dependent variable was influenced by location, brand image, and, product and services in the amount of 31.34% and the others 68.66% was influenced by the others factor. From the paired sample t-test shown that the weekend banking services still not effective to increase the third party funds  DOI:10.15408/aiq.v6i1.1370

  20. Pim-2 activates API-5 to inhibit the apoptosis of hepatocellular carcinoma cells through NF-kappaB pathway.

    Science.gov (United States)

    Ren, Ke; Zhang, Wei; Shi, Yujun; Gong, Jianping

    2010-06-01

    Pim-2 is proved to be relevant to the tumorigenesis of hepatocellular carcinoma (HCC), but the mechanism is unclear. We studied the relationship among Pim-2, NF-kappaB and API-5. In our experiment, expression level of the three factors and phosphorylation level of API-5, as well as NF-kappaB activity, were detected in HCC tissues and the nontumorous controls. Then Pim-2 gene was transfected into nontumorous liver cells L02, and Pim-2 SiRNA was transfected into hepatoblastoma cell line HepG2. Parthenolide was added as NF-kappaB inhibitor. The same detections as above were repeated in the cells, along with the apoptosis analysis. We found the levels of Pim-2, NF-kappaB and API-5, as well as NF-kappaB activity, were significantly higher in HCC tissues. Pim-2 level was increased in L02 cells after the transfection of Pim-2 gene, but decreased in HepG2 cells after the transfection of Pim-2 SiRNA. The levels of NF-kappaB and API-5, as well as NF-kappaB activity and API-5 phosphorylation level, were in accordance with Pim-2 level, but could be reversed by Parthenolide. Cell apoptosis rates were negatively correlated with API-5 phosphorylation level. Therefore, we infer that Pim-2 could activate API-5 to inhibit the apoptosis of liver cells, and NF-kappaB is the key regulator.

  1. Pim kinases phosphorylate multiple sites on Bad and promote 14-3-3 binding and dissociation from Bcl-XL

    Directory of Open Access Journals (Sweden)

    Hastie C James

    2006-01-01

    Full Text Available Abstract Background Pim-1, 2 and 3 are a group of enzymes related to the calcium calmodulin family of protein kinases. Over-expression of Pim-1 and Pim-2 in mice promotes the development of lymphomas, and up-regulation of Pim expression has been observed in several human cancers. Results Here we show that the pim kinases are constitutively active when expressed in HEK-293 cells and are able to phosphorylate the Bcl-2 family member Bad on three residues, Ser112, Ser136 and Ser155 in vitro and in cells. In vitro mapping showed that Pim-2 predominantly phosphorylated Ser112, while Pim-1 phosphorylated Ser112, but also Ser136 and Ser155 at a reduced rate compared to Ser112. Pim-3 was found to be the least specific for Ser112, and the most effective at phosphorylating Ser136 and Ser155. Pim-3 was also able to phosphorylate other sites in Bad in vitro, including Ser170, another potential in vivo site. Mutation of Ser136 to alanine prevented the phosphorylation of Ser112 and Ser155 by Pim kinases in HEK-293 cells, suggesting that this site must be phosphorylated first in order to make the other sites accessible. Pim phosphorylation of Bad was also found to promote the 14-3-3 binding of Bad and block its association with Bcl-XL. Conclusion All three Pim kinase family members predominantly phosphorylate Bad on Ser112 and in addition are capable of phosphorylating Bad on multiple sites associated with the inhibition of the pro-apoptotic function of Bad in HEK-293 cells. This would be consistent with the proposed function of Pim kinases in promoting cell proliferation and preventing cell death.

  2. Bahamas Sea Water Temperature Data 1988-2003, PIMS Environmental Monitoring Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This metadata record references seawater temperature data collected at various sites and depths in the vicinity of PIMS research station on Lee Stocking Island,...

  3. Pim-1 preserves mitochondrial morphology by inhibiting dynamin-related protein 1 translocation.

    Science.gov (United States)

    Din, Shabana; Mason, Matthew; Völkers, Mirko; Johnson, Bevan; Cottage, Christopher T; Wang, Zeping; Joyo, Anya Y; Quijada, Pearl; Erhardt, Peter; Magnuson, Nancy S; Konstandin, Mathias H; Sussman, Mark A

    2013-04-09

    Mitochondrial morphological dynamics affect the outcome of ischemic heart damage and pathogenesis. Recently, mitochondrial fission protein dynamin-related protein 1 (Drp1) has been identified as a mediator of mitochondrial morphological changes and cell death during cardiac ischemic injury. In this study, we report a unique relationship between Pim-1 activity and Drp1 regulation of mitochondrial morphology in cardiomyocytes challenged by ischemic stress. Transgenic hearts overexpressing cardiac Pim-1 display reduction of total Drp1 protein levels, increased phosphorylation of Drp1-(S637), and inhibition of Drp1 localization to the mitochondria. Consistent with these findings, adenoviral-induced Pim-1 neonatal rat cardiomyocytes (NRCMs) retain a reticular mitochondrial phenotype after simulated ischemia (sI) and decreased Drp1 mitochondrial sequestration. Interestingly, adenovirus Pim-dominant negative NRCMs show increased expression of Bcl-2 homology 3 (BH3)-only protein p53 up-regulated modulator of apoptosis (PUMA), which has been previously shown to induce Drp1 accumulation at mitochondria and increase sensitivity to apoptotic stimuli. Overexpression of the p53 up-regulated modulator of apoptosis-dominant negative adenovirus attenuates localization of Drp1 to mitochondria in adenovirus Pim-dominant negative NRCMs promotes reticular mitochondrial morphology and inhibits cell death during sI. Therefore, Pim-1 activity prevents Drp1 compartmentalization to the mitochondria and preserves reticular mitochondrial morphology in response to sI.

  4. Synthesis and Transport Properties of Novel MOF/PIM-1/MOF Sandwich Membranes for Gas Separation

    Directory of Open Access Journals (Sweden)

    Alessio Fuoco

    2017-02-01

    Full Text Available Metal-organic frameworks (MOFs were supported on polymer membrane substrates for the fabrication of composite polymer membranes based on unmodified and modified polymer of intrinsic microporosity (PIM-1. Layers of two different MOFs, zeolitic imidazolate framework-8 (ZIF-8 and Copper benzene tricarboxylate ((HKUST-1, were grown onto neat PIM-1, amide surface-modified PIM-1 and hexamethylenediamine (HMDA -modified PIM-1. The surface-grown crystalline MOFs were characterized by a combination of several techniques, including powder X-ray diffraction, infrared spectroscopy and scanning electron microscopy to investigate the film morphology on the neat and modified PIM-1 membranes. The pure gas permeabilities of He, H2, O2, N2, CH4, CO2 were studied to understand the effect of the surface modification on the basic transport properties and evaluate the potential use of these membranes for industrially relevant gas separations. The pure gas transport was discussed in terms of permeability and selectivity, highlighting the effect of the MOF growth on the diffusion coefficients of the gas in the new composite polymer membranes. The results confirm that the growth of MOFs on polymer membranes can enhance the selectivity of the appropriately functionalized PIM-1, without a dramatic decrease of the permeability.

  5. The putative oncogene Pim-1 in the mouse: its linkage and variation among t haplotypes.

    Science.gov (United States)

    Nadeau, J H; Phillips, S J

    1987-11-01

    Pim-1, a putative oncogene involved in T-cell lymphomagenesis, was mapped between the pseudo-alpha globin gene Hba-4ps and the alpha-crystallin gene Crya-1 on mouse chromosome 17 and therefore within the t complex. Pim-1 restriction fragment variants were identified among t haplotypes. Analysis of restriction fragment sizes obtained with 12 endonucleases demonstrated that the Pim-1 genes in some t haplotypes were indistinguishable from the sizes for the Pim-1b allele in BALB/c inbred mice. There are now three genes, Pim-1, Crya-1 and H-2 I-E, that vary among independently derived t haplotypes and that have indistinguishable alleles in t haplotypes and inbred strains. These genes are closely linked within the distal inversion of the t complex. Because it is unlikely that these variants arose independently in t haplotypes and their wild-type homologues, we propose that an exchange of chromosomal segments, probably through double crossingover, was responsible for indistinguishable Pim-1 genes shared by certain t haplotypes and their wild-type homologues. There was, however, no apparent association between variant alleles of these three genes among t haplotypes as would be expected if a single exchange introduced these alleles into t haplotypes. If these variant alleles can be shown to be identical to the wild-type allele, then lack of association suggests that multiple exchanges have occurred during the evolution of the t complex.

  6. Synthesis and Transport Properties of Novel MOF/PIM-1/MOF Sandwich Membranes for Gas Separation.

    Science.gov (United States)

    Fuoco, Alessio; Khdhayyer, Muhanned R; Attfield, Martin P; Esposito, Elisa; Jansen, Johannes C; Budd, Peter M

    2017-02-11

    Metal-organic frameworks (MOFs) were supported on polymer membrane substrates for the fabrication of composite polymer membranes based on unmodified and modified polymer of intrinsic microporosity (PIM-1). Layers of two different MOFs, zeolitic imidazolate framework-8 (ZIF-8) and Copper benzene tricarboxylate ((HKUST-1), were grown onto neat PIM-1, amide surface-modified PIM-1 and hexamethylenediamine (HMDA) -modified PIM-1. The surface-grown crystalline MOFs were characterized by a combination of several techniques, including powder X-ray diffraction, infrared spectroscopy and scanning electron microscopy to investigate the film morphology on the neat and modified PIM-1 membranes. The pure gas permeabilities of He, H₂, O₂, N₂, CH₄, CO₂ were studied to understand the effect of the surface modification on the basic transport properties and evaluate the potential use of these membranes for industrially relevant gas separations. The pure gas transport was discussed in terms of permeability and selectivity, highlighting the effect of the MOF growth on the diffusion coefficients of the gas in the new composite polymer membranes. The results confirm that the growth of MOFs on polymer membranes can enhance the selectivity of the appropriately functionalized PIM-1, without a dramatic decrease of the permeability.

  7. Preparation and application of polymer inclusion membranes (PIMs) including alamine 336 for the extraction of metals from an aqueous solution: Priprava in uporaba membrane iz polimera (PIM) in alamina 336 za ločenje kovin iz vodnih raztopin:

    OpenAIRE

    2014-01-01

    Polymer inclusion membranes (PIMs) present an attractive approach for the separation of metals from an aqueous solution. The present study is about the application of Alamine 336 as an ion carrier in PIMs. The separation of copper (II), cobalt (II), nickel (II) and cadmium (II) from aqueous solutions with polymer inclusion membranes was investigated. PIMs are formed by casting a solution containing a carrier (extractant), a plasticizer and a base polymer, such as cellulose tri-acetate (CTA) o...

  8. Pim-2 protects H9c2 cardiomyocytes from hypoxia/reoxygenation-induced apoptosis via downregulation of Bim expression.

    Science.gov (United States)

    Xu, Yan; Xing, Yawei; Xu, Yanjie; Huang, Chahua; Bao, Huihui; Hong, Kui; Cheng, Xiaoshu

    2016-12-01

    We know that silencing Bim, a pro-apoptosis protein, significantly attenuates glucose and oxygen-deprived induced apoptosis in cardiomyocytes. However, the mechanisms underlying the regulation of the Bim activation in the heart have remained unknown. Pim-2 is one of three Pim serine/threonine kinase family members thought to be involved in cell survival and proliferation. H9c2 cardiomyocytes were subjected to a hypoxia/reoxygenation (H/R) condition in vitro, mimicking ischemic/reperfusion injury in vivo. H/R augmented the expression of Bim, Cyt C, and Pim-2 and induced H9c2 cell apoptosis. Overexpression of Pim-2 attenuated apoptosis which induced by H/R in H9c2 cells, via downregulation of Bim and Cyt C expression. Silencing of Pim-2 promoted H/R-induced apoptosis via upregulation of Bim and Cyt C expression. Co-IP revealed the interaction between Pim-2 and Bim protein, with Bim Ser(65) phosphorylated by Pim-2. Furthermore, blocking proteasome activity by MG132 prevented Bim degradation, and Bim S65A mutation could reverse the anti-apoptotic role of Pim-2 which induced by H/R. These data demonstrated that Pim-2 is a novel Bim-interacting protein, which negatively regulates Bim degradation and protects H9c2 cardiomyocytes from H/R-induced apoptosis.

  9. The Performance of a Thermally Cross-Linked Polymer of Intrinsic Microporosity (PIM-1) for Gas Separation

    KAUST Repository

    Alghunaimi, Fahad I.

    2013-05-01

    Gas transport properties of PIM-1 (the first ladder polymer with intrinsic microporosity) and TC-PIM-1 (thermally cross-linked PIM-1) at 35°C and different pressures were thoroughly studied. The purpose of this study was to evaluate and compare the performance of the TC-PIM-1 membranes with PIM-1 for natural gas separation. The TC-PIM-1 polymer was prepared by post-modification of PIM-1 at 300°C for a period of two days. Sorption isotherms of seven gases, including N2, O2, CH4, CO2, C2H6, C3H8 and n-C4H10, were determined for PIM-1 and TC-PIM-1 using the dual-volume barometric sorption technique at 35°C at different pressures. The sorption isotherms followed the dual-mode sorption model, which is typical for glassy polymers. Moreover, permeability (P) of eight gases, including He, H2, N2, O2, CH4, CO2, C3H8 and n-C4H10, were determined for PIM-1 and TC-PIM-1 at 35°C and 2.0 atm. Furthermore, average diffusion coefficients (D ̅) were calculated from the permeability and solubility data for all tested gases for both polymers. The sorption (S), permeability (P) and average diffusion coefficients (D ̅) for the TC-PIM-1 membrane exhibited lower values than the PIM-1 membrane. However, the TC-PIM-1 membrane showed exceptional gas separation performance. The TC-PIM-1 membrane had a helium (He) permeability of 1218 barrer with He/CH4 and He/N2 ideal selectivities of 27.1 and 23.9 respectively, and carbon dioxide (CO2) permeability of 1088 barrer with CO2/CH4 and CO2/N2 ideal selectivities of 24.2 and 21.3 respectively. Additionally, the TC-PIM-1 membrane showed a hydrogen (H2) permeability of 2452 barrer with an ideal H2/CH4 selectivity of 54.5.

  10. The discovery of novel 3-(pyrazin-2-yl)-1H-indazoles as potent pan-Pim kinase inhibitors.

    Science.gov (United States)

    Wang, Hui-Ling; Cee, Victor J; Chavez, Frank; Lanman, Brian A; Reed, Anthony B; Wu, Bin; Guerrero, Nadia; Lipford, J Russell; Sastri, Christine; Winston, Jeff; Andrews, Kristin L; Huang, Xin; Lee, Matthew R; Mohr, Christopher; Xu, Yang; Zhou, Yihong; Tasker, Andrew S

    2015-02-15

    The three Pim kinases are a small family of serine/threonine kinases regulating several signaling pathways that are fundamental to tumorigenesis. As such, the Pim kinases are a very attractive target for pharmacological inhibition in cancer therapy. Herein, we describe our efforts toward the development of a potent, pan-Pim inhibitor. The synthesis and hit-to-lead SAR development from a 3-(pyrazin-2-yl)-1H-indazole derived hit 2 to the identification of a series of potent, pan-Pim inhibitors such as 13o are described.

  11. Definition of the first mannosylation step in phosphatidylinositol mannoside synthesis. PimA is essential for growth of mycobacteria.

    Science.gov (United States)

    Korduláková, Jana; Gilleron, Martine; Mikusova, Katarína; Puzo, Germain; Brennan, Patrick J; Gicquel, Brigitte; Jackson, Mary

    2002-08-30

    We examined the function of the pimA (Rv2610c) gene, located in the vicinity of the phosphatidylinositol synthase gene in the genomes of Mycobacterium tuberculosis and Mycobacterium smegmatis, which encodes a putative mannosyltransferase involved in the early steps of phosphatidylinositol mannoside synthesis. A cell-free assay was developed in which membranes from M. smegmatis overexpressing the pimA gene incorporate mannose from GDP-[(14)C]Man into di- and tri-acylated phosphatidylinositol mono-mannosides. Moreover, crude extracts from Escherichia coli producing a recombinant PimA protein synthesized diacylated phosphatidylinositol mono-mannoside from GDP-[(14)C]Man and bovine phosphatidylinositol. To determine whether PimA is an essential enzyme of mycobacteria, we constructed a pimA conditional mutant of M. smegmatis. The ability of this mutant to synthesize the PimA mannosyltransferase was dependent on the presence of a functional copy of the pimA gene carried on a temperature-sensitive rescue plasmid. We demonstrate here that the pimA mutant is unable to grow at the higher temperature at which the rescue plasmid is lost. Thus, the synthesis of phosphatidylinositol mono-mannosides and derived higher phosphatidylinositol mannosides in M. smegmatis appears to be dependent on PimA and essential for growth. This work provides the first direct evidence of the essentiality of phosphatidylinositol mannosides for the growth of mycobacteria.

  12. The Plasma Instrument for Magnetic Sounding (PIMS) on The Europa Clipper Mission

    Science.gov (United States)

    Westlake, Joseph H.; McNutt, Ralph L.; Kasper, Justin C.; Case, Anthony W.; Grey, Matthew P.; Kim, Cindy K.; Battista, Corina C.; Rymer, Abigail; Paty, Carol S.; Jia, Xianzhe; Stevens, Michael L.; Khurana, Krishan; Kivelson, Margaret G.; Slavin, James A.; Korth, Haje H.; Smith, Howard T.; Krupp, Norbert; Roussos, Elias; Saur, Joachim

    2016-10-01

    The Europa Clipper mission is equipped with a sophisticated suite of 9 instruments to study Europa's interior and ocean, geology, chemistry, and habitability from a Jupiter orbiting spacecraft. The Plasma Instrument for Magnetic Sounding (PIMS) on Europa Clipper is a Faraday Cup based plasma instrument whose heritage dates back to the Voyager spacecraft. PIMS will measure the plasma that populates Jupiter's magnetosphere and Europa's ionosphere. The science goals of PIMS are to: 1) estimate the ocean salinity and thickness by determining Europa's magnetic induction response, corrected for plasma contributions; 2) assess mechanisms responsible for weathering and releasing material from Europa's surface into the atmosphere and ionosphere; and 3) understand how Europa influences its local space environment and Jupiter's magnetosphere and vice versa.Europa is embedded in a complex Jovian magnetospheric plasma, which rotates with the tilted planetary field and interacts dynamically with Europa's ionosphere affecting the magnetic induction signal. Plasma from Io's temporally varying torus diffuses outward and mixes with the charged particles in Europa's own torus producing highly variable plasma conditions at Europa. PIMS works in conjunction with the Interior Characterization of Europa using Magnetometry (ICEMAG) investigation to probe Europa's subsurface ocean. This investigation exploits currents induced in Europa's interior by the moon's exposure to variable magnetic fields in the Jovian system to infer properties of Europa's subsurface ocean such as its depth, thickness, and conductivity. This technique was successfully applied to Galileo observations and demonstrated that Europa indeed has a subsurface ocean. While these Galileo observations contributed to the renewed interest in Europa, due to limitations in the observations the results raised major questions that remain unanswered. PIMS will greatly refine our understanding of Europa's global liquid ocean by

  13. Simulation of Neutral Particle Transport During HiPIMS

    Science.gov (United States)

    Trieschmann, Jan; Gallian, Sara; Brinkmann, Ralf Peter; Mussenbrock, Thomas

    2014-10-01

    In this work the importance of the knowledge of the spatial distribution, its temporal evolution as well as their energy distribution of heavy particles within sputtering processes is discussed. To describe these discharges - typically operated at very low pressures below 1 Pa - specific modeling approaches are required. Our approach comprises a three-dimensional kinetic Lagrangian description of neutral particles. A modified version of the direct simulation Monte Carlo (DSMC) code dsmcFoam is used, with the aim to describe the evolution of background and sputtered particles of a High Power Impulse Magnetron Sputtering (HiPIMS) process in a research reactor. Emphasize is put on the influence of the initial angular distribution of sputtered particles, as well as their energy distribution and its angular dependence. Based on the work of Stepanova and Dew a modified Thompson energy distribution is used. Differently distributed sputtered particles provide densities and fluxes concerning the corresponding film formation. This work is supported by the German Research Foundation in the frame of the Collaborative Research Centre TRR 87.

  14. Pim-3 contributes to radioresistance through regulation of the cell cycle and DNA damage repair in pancreatic cancer cells

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiang-Yuan; Wang, Zhen [Cancer Research Institute, Fudan University Shanghai Cancer Center, Department of Oncology, Shanghai Medical College, Fudan University, Shanghai (China); Li, Bei [Department of Nuclear Medicine, Fudan University Shanghai Cancer Center, Department of Oncology, Shanghai Medical College, Fudan University, Shanghai (China); Zhang, Ying-Jian, E-mail: yjzhang111@aliyun.com [Department of Nuclear Medicine, Fudan University Shanghai Cancer Center, Department of Oncology, Shanghai Medical College, Fudan University, Shanghai (China); Li, Ying-Yi, E-mail: liyingyi@fudan.edu.cn [Cancer Research Institute, Fudan University Shanghai Cancer Center, Department of Oncology, Shanghai Medical College, Fudan University, Shanghai (China)

    2016-04-22

    Resistance of cancer cells to chemoradiotherapy is a major clinical problem in pancreatic cancer treatment. Therefore, understanding the molecular basis of cellular resistance and identifying novel targets are essential for improving treatment efficacy for pancreatic cancer patients. Previous studies have demonstrated a significant role for Pim-3 in pancreatic cancer survival against gemcitabine-induced genotoxic stress. Here, we observed that radiation treatment enhanced Pim-3 expression in human pancreatic cancer cells in vitro. Stable overexpression of Pim-3 in pancreatic cancer cells significantly protected cells against radiation treatment by attenuating G2/M phase cell cycle arrest and DNA damage response. Silencing of Pim-3 expression significantly elevated the phosphorylation of histone variant H2AX, a marker of DNA double strand breaks, and decreased the activation of ataxia-telangiectasia-mutated (ATM) kinase, along with its downstream targets, eventually enhancing the radiosensitivity of human pancreatic cancer cells in vitro and in vivo. Hence, we demonstrated a novel function for Pim-3 in human pancreatic cancer cell survival against radiation. Targeting Pim-3 may be a promising way to improve treatment efficacy in combination with radiotherapy in human pancreatic cancer. - Highlights: • This is first study to demonstrate that Pim-3 is endogenously induced by ionizing radiation in pancreatic cancer cells, and Pim-3 overexpression enhanced radioresistance of pancreatic cancer cells both in vitro and in vivo. • This is first study to provide evidence that radioresistance induced by Pim-3 is mainly attributed to Pim-3 induces activation of ATM, which subsequently activates checkpoint 1, leading to amplification of DNA repair through cell cycle arrest and DNA repair pathways. • This is first study to indicate that targeting Pim-3 may be a promising strategy to provide better treatment efficacy in combination with radiotherapy in human pancreatic

  15. Lymphoma induction by heterocyclic amines in Eu-pim-1 transgenic mice

    DEFF Research Database (Denmark)

    Sørensen, Ilona Kryspin; Kristiansen, E.; Mortensen, Alicja

    1997-01-01

    The usefulness of transgenic E mu-pim-1 mice bearing in their genome the pim-1 oncogene supplemented with an upstream immunoglobulin enhancer and a downstream murine leukaemia virus long terminal repeat, as sensitive test organisms was studied in two short-term carcinogenicity studies. The mice...... to bacteria and cultured mammalian cells. PhIP is a potent mouse lymphomagen, while IQ is a liver, lung and forestomach carcinogen in mice. We found that transgenic E mu-pim-1 mice are highly susceptible to PhIP induced lymphomagenesis but do not respond to IQ treatment. PhIP feeding of E mu-pim-1 mice...... not only increased the total number of T-cell lymphomas but also decreased the latency time compared to either transgenic or wild-type controls. The effect was most pronounced in the treated female E mu-pim-1 mice, which showed a higher incidence of PhIP induced T-cell lymphomas than transgenic males...

  16. Building more powerful less expensive supercomputers using Processing-In-Memory (PIM) LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Richard C.

    2009-09-01

    This report details the accomplishments of the 'Building More Powerful Less Expensive Supercomputers Using Processing-In-Memory (PIM)' LDRD ('PIM LDRD', number 105809) for FY07-FY09. Latency dominates all levels of supercomputer design. Within a node, increasing memory latency, relative to processor cycle time, limits CPU performance. Between nodes, the same increase in relative latency impacts scalability. Processing-In-Memory (PIM) is an architecture that directly addresses this problem using enhanced chip fabrication technology and machine organization. PIMs combine high-speed logic and dense, low-latency, high-bandwidth DRAM, and lightweight threads that tolerate latency by performing useful work during memory transactions. This work examines the potential of PIM-based architectures to support mission critical Sandia applications and an emerging class of more data intensive informatics applications. This work has resulted in a stronger architecture/implementation collaboration between 1400 and 1700. Additionally, key technology components have impacted vendor roadmaps, and we are in the process of pursuing these new collaborations. This work has the potential to impact future supercomputer design and construction, reducing power and increasing performance. This final report is organized as follow: this summary chapter discusses the impact of the project (Section 1), provides an enumeration of publications and other public discussion of the work (Section 1), and concludes with a discussion of future work and impact from the project (Section 1). The appendix contains reprints of the refereed publications resulting from this work.

  17. Simultaneous electrical and optical study of spoke rotation, merging and splitting in HiPIMS plasma

    Science.gov (United States)

    Klein, P.; Lockwood Estrin, F.; Hnilica, J.; Vašina, P.; Bradley, J. W.

    2017-01-01

    To gain more information on the temporal and spatial behaviour of self-organized spoke structures in HiPIMS plasmas, a correlation between the broadband optical image of an individual spoke (taken over 200 ns) and the current it delivers to the target has been made for a range of magnetron operating conditions. As a spoke passes over a set of embedded probes in the niobium cathode target, a distinct modulation in the local current density is observed, (typically up to twice the average value), matching very well the radially integrated optical emission intensities (obtained remotely with an ICCD camera). The dual diagnostic system allows the merging and splitting of a set of spokes to be studied as they rotate. It is observed that in the merger of two spokes, the trailing spoke maintains its velocity while the leading spoke either decreases its velocity or increases its azimuthal length. In the spoke splitting process, the total charge collected by an embedded probe is conserved. A simple phenomenological model is developed that relates the spoke mode number m to the spoke dimensions, spoke velocity and gas atom velocity. The results are discussed in the context of the observations of spoke dynamics made by Hecimovic et al (2015 Plasma Sources Sci. Technol. 24 045005)

  18. Advancements of labelled radio-pharmaceutics imaging with the PIM-MPGD

    Energy Technology Data Exchange (ETDEWEB)

    Donnard, J; Berny, R; Carduner, H; Leray, P; Morteau, E; Servagent, N; Thers, D [Subatech, in2p3/Ecole des Mines de Nantes/Universite de Nantes, La Chantrerie 4 rue Alfred Kastler BP 20722 44307 NANTES CEDEX 3 (France); Arlicot, N, E-mail: jerome.donnard@subatech.in2p3.f [INSERM U930 CNRS ERL 3106/Universite Francois Rabelais de Tours, CHRU Bretonneau 2 boulevard Tonnelle, 37044 TOURS CEDEX (France)

    2009-11-15

    The Beta autoradiography is widely used in pharmacology or in biological fields to study the response of an organism to a certain kind of molecule. The image of the distribution is processed by studying the concentration of the radioactivity into different organs. We report on the development of an integrated apparatus based on a PIM device (Parallel Ionization Multiplier) able to process the image of 10 microscope slides at the same time over an area of 18*18 cm{sup 2}. Thanks to a vacuum pump and a regulation gas circuit, 5 minutes is sufficient to begin an acquisition. All the electronics and the gas distribution are included in the structure leading to a transportable device. Special software has been developed to process data in real time with image visualization. Biological samples can be labelled with beta emitters of low energy like {sup 3}H/{sup 14}C or Auger electrons of {sup 125}I/{sup 99m}Tc. The measured spatial resolution is 30 mum in {sup 3}H and the trigger and the charge rate are constant over more than 6 days of acquisition showing good stability of the device. Moreover, collaboration with doctors and biologists of INSERM (National Institute for Medical Research in France) has started in order to demonstrate that MPGD's can be easily proposed outside a physics laboratory.

  19. Pim2 cooperates with PML-RARalpha to induce acute myeloid leukemia in a bone marrow transplantation model

    DEFF Research Database (Denmark)

    Agrawal-Singh, Shuchi; Koschmieder, Steffen; Gelsing, Sandra

    2010-01-01

    Although the potential role of Pim2 as a cooperative oncogene has been well described in lymphoma, its role in leukemia has remained largely unexplored. Here we show that high expression of Pim2 is observed in patients with acute promyelocytic leukemia (APL). To further characterize the cooperati...

  20. Gas Sorption, Diffusion and Permeation in a Polymer of Intrinsic Microporosity (PIM-7)

    KAUST Repository

    Alaslai, Nasser Y.

    2013-05-08

    The entire world including Saudi Arabia is dependent on natural gas to provide new energy supplies for the future. Conventional ways for gas separation are expensive, and, hence, it is very important to reduce the cost and lower the energy consumption. Membrane technology is a relatively new separation process for natural gas purification with large growth potential, specifically for off-shore applications. The economics of any membrane separation process depend primarily on the intrinsic gas permeation properties of the membrane materials. All current commercial membranes for natural gas separation are made from polymers, which have several drawbacks, including low permeability, moderate selectivity, and poor stability in acid gas and hydrocarbon environments. The recent development of polymeric materials called “polymers of intrinsic microporosity” (PIMs) provide a new class of high-performance membrane materials that are anticipated to be used in natural gas separation processes including, but not limited to, acid gas removal and separation of hydrocarbons from methane. PIM-7 is an excellent example of a material from the PIMs series for gas separation. It was selected for this work since it has not been extensively tested for its gas permeation properties to date. Specifically, sorption and mixed-gas permeation data were not available for PIM-7 prior to this work. Sorption isotherms of N2, O2, CH4, CO2, C2H6, C3H8 and n-C4H10 were determined over a range of pressures at 35 oC for PIM-7 using a custom-designed dual-volume pressure decay system. Condensable hydrocarbon gases, such as C3H8 and n-C4H10, show significantly higher solubility than the other less condensable gas of the test series due to their high affinity to the polymer matrix. Dual-mode sorption model parameters were determined from the sorption isotherms. Henry’s law solubility, Langmuir capacity constant and the affinity constant increased with gas condensability. Permeability coefficients

  1. Research and development of a gaseous detector PIM (parallel ionization multiplier) dedicated to particle tracking under high hadron rates; Recherche et developpement d'un detecteur gazeux PIM (Parallel Ionization Multiplier) pour la trajectographie de particules sous un haut flux de hadrons

    Energy Technology Data Exchange (ETDEWEB)

    Beucher, J

    2007-10-15

    PIM (Parallel Ionization Multiplier) is a multi-stage micro-pattern gaseous detector using micro-meshes technology. This new device, based on Micromegas (micro-mesh gaseous structure) detector principle of operation, offers good characteristics for minimum ionizing particles track detection. However, this kind of detectors placed in hadron environment suffers discharges which degrade sensibly the detection efficiency and account for hazard to the front-end electronics. In order to minimize these strong events, it is convenient to perform charges multiplication by several successive steps. Within the framework of a European hadron physics project we have investigated the multi-stage PIM detector for high hadrons flux application. For this part of research and development, a systematic study for many geometrical configurations of a two amplification stages separated with a transfer space operated with the gaseous mixture Ne + 10% CO{sub 2} has been performed. Beam tests realised with high energy hadrons at CERN facility have given that discharges probability could be strongly reduced with a suitable PIM device. A discharges rate lower to 10{sup 9} by incident hadron and a spatial resolution of 51 {mu}m have been measured at the beginning efficiency plateau (>96 %) operating point. (author)

  2. PIMS sequencing extension: a laboratory information management system for DNA sequencing facilities

    Science.gov (United States)

    2011-01-01

    Background Facilities that provide a service for DNA sequencing typically support large numbers of users and experiment types. The cost of services is often reduced by the use of liquid handling robots but the efficiency of such facilities is hampered because the software for such robots does not usually integrate well with the systems that run the sequencing machines. Accordingly, there is a need for software systems capable of integrating different robotic systems and managing sample information for DNA sequencing services. In this paper, we describe an extension to the Protein Information Management System (PIMS) that is designed for DNA sequencing facilities. The new version of PIMS has a user-friendly web interface and integrates all aspects of the sequencing process, including sample submission, handling and tracking, together with capture and management of the data. Results The PIMS sequencing extension has been in production since July 2009 at the University of Leeds DNA Sequencing Facility. It has completely replaced manual data handling and simplified the tasks of data management and user communication. Samples from 45 groups have been processed with an average throughput of 10000 samples per month. The current version of the PIMS sequencing extension works with Applied Biosystems 3130XL 96-well plate sequencer and MWG 4204 or Aviso Theonyx liquid handling robots, but is readily adaptable for use with other combinations of robots. Conclusions PIMS has been extended to provide a user-friendly and integrated data management solution for DNA sequencing facilities that is accessed through a normal web browser and allows simultaneous access by multiple users as well as facility managers. The system integrates sequencing and liquid handling robots, manages the data flow, and provides remote access to the sequencing results. The software is freely available, for academic users, from http://www.pims-lims.org/. PMID:21385349

  3. PIMS sequencing extension: a laboratory information management system for DNA sequencing facilities

    Directory of Open Access Journals (Sweden)

    Baldwin Stephen A

    2011-03-01

    Full Text Available Abstract Background Facilities that provide a service for DNA sequencing typically support large numbers of users and experiment types. The cost of services is often reduced by the use of liquid handling robots but the efficiency of such facilities is hampered because the software for such robots does not usually integrate well with the systems that run the sequencing machines. Accordingly, there is a need for software systems capable of integrating different robotic systems and managing sample information for DNA sequencing services. In this paper, we describe an extension to the Protein Information Management System (PIMS that is designed for DNA sequencing facilities. The new version of PIMS has a user-friendly web interface and integrates all aspects of the sequencing process, including sample submission, handling and tracking, together with capture and management of the data. Results The PIMS sequencing extension has been in production since July 2009 at the University of Leeds DNA Sequencing Facility. It has completely replaced manual data handling and simplified the tasks of data management and user communication. Samples from 45 groups have been processed with an average throughput of 10000 samples per month. The current version of the PIMS sequencing extension works with Applied Biosystems 3130XL 96-well plate sequencer and MWG 4204 or Aviso Theonyx liquid handling robots, but is readily adaptable for use with other combinations of robots. Conclusions PIMS has been extended to provide a user-friendly and integrated data management solution for DNA sequencing facilities that is accessed through a normal web browser and allows simultaneous access by multiple users as well as facility managers. The system integrates sequencing and liquid handling robots, manages the data flow, and provides remote access to the sequencing results. The software is freely available, for academic users, from http://www.pims-lims.org/.

  4. Expression of PIM kinases in Reed-Sternberg cells fosters immune privilege and tumor cell survival in Hodgkin lymphoma.

    Science.gov (United States)

    Szydłowski, Maciej; Prochorec-Sobieszek, Monika; Szumera-Ciećkiewicz, Anna; Derezińska, Edyta; Hoser, Grażyna; Wasilewska, Danuta; Szymańska-Giemza, Olga; Jabłońska, Ewa; Białopiotrowicz, Emilia; Sewastianik, Tomasz; Polak, Anna; Czardybon, Wojciech; Gałęzowski, Michał; Windak, Renata; Zaucha, Jan Maciej; Warzocha, Krzysztof; Brzózka, Krzysztof; Juszczyński, Przemysław

    2017-09-21

    Reed-Sternberg (RS) cells of classical Hodgkin lymphoma (cHL) express multiple immunoregulatory proteins that shape the cHL microenvironment and allow tumor cells to evade immune surveillance. Expression of certain immunoregulatory proteins is modulated by prosurvival transcription factors, such as NFκB and STATs. Because these factors also induce expression of the oncogenic PIM1/2/3 serine/threonine kinases, and as PIMs modulate transcriptional activity of NFκB and STATs, we hypothesized that these kinases support RS cell survival and foster their immune privilege. Here, we investigated PIM1/2/3 expression in cHL and assessed their role in developing RS cell immune privilege and survival. PIM1/2/3 were ubiquitously expressed in primary and cultured RS cells, and their expression was driven by JAK-STAT and NFκB activity. Genetic or chemical PIM inhibition with a newly developed pan-PIM inhibitor, SEL24-B489, induced RS cell apoptosis. PIM inhibition decreased cap-dependent protein translation, blocked JAK-STAT signaling, and markedly attenuated NFκB-dependent gene expression. In a cHL xenograft model, SEL24-B489 delayed tumor growth by 95.8% (P = .0002). Furthermore, SEL24-B489 decreased the expression of multiple molecules engaged in developing the immunosuppressive microenvironment, including galectin-1 and PD-L1/2. In coculture experiments, T cells incubated with SEL24-B489-treated RS cells exhibited higher expression of activation markers than T cells coincubated with control RS cells. Taken together, our data indicate that PIM kinases in cHL exhibit pleiotropic effects, orchestrating tumor immune escape and supporting RS cell survival. Inhibition of PIM kinases decreases RS cell viability and disrupts signaling circuits that link these cells with their niches. Thus, PIM kinases are promising therapeutic targets in cHL. © 2017 by The American Society of Hematology.

  5. Genetic modelling of PIM proteins in cancer: proviral tagging, cooperation with oncogenes, tumor suppressor genes and carcinogens.

    Directory of Open Access Journals (Sweden)

    Enara eAguirre

    2014-05-01

    Full Text Available The PIM proteins, which were initially discovered as proviral insertion sites in Moloney murine leukemia virus infection, are a family of highly homologous serine/threonine kinases that have been reported to be overexpressed in hematological malignancies and solid tumors. The PIM proteins have also been associated with metastasis and overall treatment responses and implicated in the regulation of apoptosis, metabolism, the cell cycle, and homing and migration, which makes these proteins interesting targets for anticancer drug discovery. The use of retroviral insertional mutagenesis and refined approaches such as complementation tagging has allowed the identification of myc, pim and a third group of genes (including bmi1 and gfi1 as complementing genes in lymphomagenesis. Moreover, mouse modeling of human cancer has provided an understanding of the molecular pathways that are involved in tumor initiation and progression at the physiological level. In particular, genetically modified mice have allowed researchers to further elucidate the role of each of the Pim isoforms in various tumor types. PIM kinases have been identified as weak oncogenes because experimental overexpression in lymphoid tissue, prostate and liver induces tumors at a relatively low incidence and with a long latency. However, very strong synergistic tumorigenicity between Pim1/2 and c-Myc and other oncogenes has been observed in lymphoid tissues. Mouse models have also been used to study whether the inhibition of specific PIM isoforms is required to prevent carcinogen-induced sarcomas, indicating that the absence of Pim2 and Pim3 greatly reduces sarcoma growth and bone invasion; the extent of this effect is similar to that observed in the absence of all 3 isoforms. This review will summarize some of the animal models that have been used to understand the isoform-specific contribution of PIM kinases to tumorigenesis.

  6. Inhibition of the Pim1 oncogene results in diminished visual function.

    Directory of Open Access Journals (Sweden)

    Jun Yin

    Full Text Available Our objective was to profile genetic pathways whose differential expression correlates with maturation of visual function in zebrafish. Bioinformatic analysis of transcriptomic data revealed Jak-Stat signalling as the pathway most enriched in the eye, as visual function develops. Real-time PCR, western blotting, immunohistochemistry and in situ hybridization data confirm that multiple Jak-Stat pathway genes are up-regulated in the zebrafish eye between 3-5 days post-fertilisation, times associated with significant maturation of vision. One of the most up-regulated Jak-Stat genes is the proto-oncogene Pim1 kinase, previously associated with haematological malignancies and cancer. Loss of function experiments using Pim1 morpholinos or Pim1 inhibitors result in significant diminishment of visual behaviour and function. In summary, we have identified that enhanced expression of Jak-Stat pathway genes correlates with maturation of visual function and that the Pim1 oncogene is required for normal visual function.

  7. Populism : polder and prairie: The rapid rise and fall of Pim Fortuyn

    NARCIS (Netherlands)

    Lucardie, Anthonie

    2004-01-01

    DUTCH POLITICS HAS A REPUTATION FOR DULLNESS AND STABILITY. But that was hardly the case in 2002, when Pim Fortuyn entered politics. His party came in second in that year's election, although it had not yet been formally founded and Fortuyn himself had been murdered a few days earlier. Yet it now re

  8. Lymphoma induction by heterocyclic amines in Eu-pim-1 transgenic mice

    DEFF Research Database (Denmark)

    Sørensen, Ilona Kryspin; Kristiansen, E.; Mortensen, Alicja

    1997-01-01

    The usefulness of transgenic E mu-pim-1 mice bearing in their genome the pim-1 oncogene supplemented with an upstream immunoglobulin enhancer and a downstream murine leukaemia virus long terminal repeat, as sensitive test organisms was studied in two short-term carcinogenicity studies. The mice...... were fed standard diet Altromin 1314 supplemented either with 0.03% 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) for 7 months or with 0.03% 2-amino-3-methylimidazo[4,5-f]quinoline (IQ) for 6 months. PhIP and IQ are heterocyclic amines formed during cooking of meat and fish and are mutagenic...... to bacteria and cultured mammalian cells. PhIP is a potent mouse lymphomagen, while IQ is a liver, lung and forestomach carcinogen in mice. We found that transgenic E mu-pim-1 mice are highly susceptible to PhIP induced lymphomagenesis but do not respond to IQ treatment. PhIP feeding of E mu-pim-1 mice...

  9. Polymer Inclusion Membranes (PIM) for the Recovery of Potassium in the Presence of Competitive Cations

    NARCIS (Netherlands)

    Casadella, Anna; Schaetzle, Olivier; Nijmeijer, Kitty; Loos, Katja

    2016-01-01

    Potassium is an important nutrient used in fertilizers but is not always naturally available We investigated the properties of polymer inclusion membranes (PIM) regarding their selective recovery of K+ over competitive ions typically present in urine (Na+ and NH4+). The greatest flux was observed wh

  10. Space charge, plasma potential and electric field distributions in HiPIMS discharges of varying configuration

    Science.gov (United States)

    Liebig, B.; Bradley, J. W.

    2013-08-01

    An electron-emitting (emissive) probe has been used to study the temporal and spatial distribution of the plasma potential during high-power impulse magnetron sputtering (HiPIMS) discharges with various substrate and magnetic field configurations. The average power was 700 W, with a repetition frequency of 100 Hz and pulse duration of 100 µs. Strongly negative plasma potentials exceeding -300 V and electric fields up to 10 kV m-1, caused by strong separation of charges with net charge carrier densities Δn of about 1014 m-3, were observed during the ignition of the discharge. The spatial distribution of the plasma potential in the stable stage of the discharge showed values consistently 5 V more negative for a floating substrate compared with a grounded one, so enhancing electron transport around the insulated substrate to grounded walls. However, this change in the electrical configuration of the plasma does not alter significantly the fraction of ionized sputtered particles (of about 30%) that can potentially reach the substrate. By changing the degree of unbalance of the sputtering source, we find a strong correlation between the electric field strength in the magnetic trap (created through charge separation) and the absolute value (and shape) of the magnetic field. For the more unbalanced magnetron, a flattening of the plasma potential structure (decrease in the axial electric field) was observed close to the target. Our findings show in principle that manipulation of the potential barrier close to the target through changing the magnetic field can regulate the proportion of sputtered and ionized species reaching the substrate.

  11. The Mechanism of Action of Unique Small Molecules that Inhibit the Pim Protein Kinase Blocking Prostate Cancer Cell Growth

    Science.gov (United States)

    2010-05-01

    Cdh1(DH01) antibody was from Abcam. Anti-Lamin B antibody was from Calbiochem. Roscovitine , and reagents for the in vitro ubiquitination assay were...transfected with Pim-1 and Skp2, metabolically labeled with orthophosphate, and then treated with kinase inhibitors such as roscovitine ( pan-CDK...inhibitor), wortmannin (PI3K inhibitor), and SMI- 4a (Pim-1 inhbitor). Treatment with roscovitine and wortmannin reduced Skp2 phosphorylation in

  12. Analysis and evaluation of effects of processing steps on dimensional tolerance of PIM parts

    Institute of Scientific and Technical Information of China (English)

    LI Yi-min; LOU Jia; YUE Jian-ling

    2005-01-01

    The factors affecting the dimensional tolerance of powder injection molding (PIM), such as the selection of the powder and binder, the feedstock homogeneity, the feedstock thermal properties, the feedstock rheologic behavior, the debinding schedule and atmosphere and sintering temperature gradient were discussed. An attempt was made to develop a model to estimate the influence of important variables. The results show that a better understanding of these factors can provide some useful theoretical instructions for large scale production.

  13. Development of performance indicators for municipal solid waste management (PIMS): A review.

    Science.gov (United States)

    Sanjeevi, V; Shahabudeen, P

    2015-12-01

    The aim of this paper is to review papers on municipal solid waste management (SWM) systems, especially on performance indicators (PIs), and suggest practical methods to manage the same by administrators. Worldwide, about 4 billion metric tons of solid waste (SW) is generated annually; the management of SW across cities is increasingly getting more complex and the funds available for providing service to citizens are shrinking. Analysis of the non-technical research papers shows that focus areas on SW can be grouped into 18 types, one being PIs. Historically, PIs for municipal SWM (PIMS) commenced with the publication of guidelines by various government agencies, starting in 1969. This was followed by a few benchmarking studies, commencing in 1998, by various international institutions. Many published comparative studies also disseminated good practices across the cities. From the 1990s onwards, research work started defining PIMS. These initiatives by various researchers took multiple dimensions and are reviewed in this paper. In almost all studies, the PIMS is measured in terms of investment decisions, public acceptance levels, social participation and environmental needs. The multiple indicators are complex, however, and managers of cities need simple tools to use. To make it simple, five-factor PIs are arrived at, considering simplicity and covering all the factors. A research agenda is outlined for future directions in the areas of cost reduction, citizens' services, citizen involvement and environmental impact.

  14. Triple probe interrogation of spokes in a HiPIMS discharge

    Science.gov (United States)

    Lockwood Estrin, F.; Karkari, S. K.; Bradley, J. W.

    2017-07-01

    Using a triple probe situated above the racetrack and inside the magnetic trap of a magnetron, rotating spoke-like structures have been clearly identified in a single HiPIMS pulse as periodic modulations of the electron temperature T e, electron density n e, ion saturation current I isat, floating potential V f and plasma potential V p. The spokes rotate in the E  ×  B direction with a velocity of ~8.8 km s-1. Defining the spoke shape from the footprint of the ion current, they deliver to flush-mounted probes embedded in the target, each spoke can be characterised by a dense but cool leading edge (n e ~ 2.0  ×  1019 m-3, T e ~ 2.1 eV) and a relatively hotter but more rarefied trailing edge (n e ~ 1  ×  1019 m-3, T e ~ 3.9 eV). Measurements of V p show a potential hump towards the rear of the spoke, separated from regions of the highest density, with plasma potentials up to 8 V more positive than the inter-spoke regions. Azimuthal electric fields of ~1 kV m-1 associated with these structures are calculated. Transforming the triple probe time-traces to functions of the azimuthal angle θ and assuming a Gaussian radial profile for the plasma parameters, 2D spatial maps of n e, T e and V p have been constructed as well as the target ion current density J p from the embedded probes. The phase relationship between T e, V p and n e can be clearly seen using this representation with n e leading T e and V p with a phase shift between them of ~50°. Regions of maximum ion current to the target, delivered by individual spokes, coincide with the overlap of regions of high n e and T e measured above the target at a height of 15 mm. Ions created at elevated positions above the target in the observed dense region will take several micro-seconds to reach that surface, so contributing to the target ion current in the following spokes.

  15. GTP is an allosteric modulator of the interaction between the guanylate-binding protein 1 and the prosurvival kinase PIM1.

    Science.gov (United States)

    Persico, Marco; Petrella, Lella; Orteca, Nausicaa; Di Dato, Antonio; Mariani, Marisa; Andreoli, Mirko; De Donato, Marta; Scambia, Giovanni; Novellino, Ettore; Ferlini, Cristiano; Fattorusso, Caterina

    2015-02-16

    GBP1 and PIM1 are known to interact with a molar ratio 1:1. GBP1:PIM1 binding initiates a signaling pathway that induces resistance to common chemotherapeutics such as paclitaxel. Since GBP1 is a large GTPase which undergoes conformational changes in a nucleotide-dependent manner, we investigated the effect of GTP/GDP binding on GBP1:PIM1 interaction by using computational and biological studies. It resulted that only GTP decreases the formation of the GBP1:PIM1 complex through an allosteric mechanism, putting the bases for the identification of new compounds potentially able to revert resistance to paclitaxel.

  16. 小麦TaPIM1基因的克隆及其转基因烟草的抗病性分析%Cloning of Wheat TaPIM1 Gene and Analysis of Disease Resistance in TaPIM1 Transgenic Tobacco

    Institute of Scientific and Technical Information of China (English)

    周贤尧; 董娜; 刘红霞; 张怀渝; 张增艳

    2010-01-01

    TaPIM1是从小麦中克隆获得的1个病原诱导的小麦MYB基因,编码由323个氨基酸残基组成的蛋白TaPIM1.TaPIM1具有R2R3类MYB转录因子的典型结构,即2个保守的MYB DNA结合域(R2和R3)、核定位位点和酸性激活区.TaPIM1的全长氨基酸序列与已克隆MYB蛋白的一致性仅为43.69%以下,为植物MYB转录因子家族R2R3亚群的一个新成员.小麦纹枯病菌(Rhizoctonia cerealis)、根腐病菌(Bipolaris sorokiniana)侵染可快速诱导抗病小麦中TaPIM1基因的上调表达,说明TaPIM1可能参与小麦对纹枯病菌、根腐病菌的防御反应.将TaPIM1基因构建到由组成型强启动子CaMV35S控制的双子叶转化载体pBI121上,通过农杆菌介导法将其转入烟草W38品系.通过卡那霉素抗性筛选和PCR检测,鉴定出转TaPIM1基因烟草T0代株系M66、M102、M110等12个株系.对转基因烟草T1代株系进行PCR、RT-PCR分析和青枯病菌抗性分析,结果表明,TaPIM1超量表达的转基因烟草株系M66、M102和M110对青枯病菌(Ralstonia solanacearum)的抗性显著高于未转基因烟草对照,TaPIM1正向调控烟草对某些病原菌的防御反应.

  17. PIM-1 as a Solution-Processable “Molecular Basket” for CO 2 Capture from Dilute Sources

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Simon H.; Jue, Melinda L.; Leisen, Johannes; Jones, Christopher W.; Lively, Ryan P.

    2015-12-15

    Rising atmospheric CO2 levels have triggered recent research into the science of amine materials supported on hard, porous materials such as mesoporous silica or alumina. While such materials can give high CO2 uptakes and good sorption kinetics, they are difficult to utilize in practical applications due to difficulty in contacting large volumes of CO2-laden gases with powder materials without significant pressure drops or sorbent attrition. Here, we describe a simple approach based on the impregnation of a permanently microporous polymer, PIM-1, with poly(ethylene imine) (PEI), removing the need for use of the hard oxide. PEI/PIM-1 composites demonstrate comparable performance to more traditionally studied oxide sorbents, with the benefit that PIM-1 is soluble in common solvents, making it eminently more viable for processing into morphologies that can facilitate heat and mass transfer and fabrication into low pressure drop contactors. In addition to adsorption studies performed on a variety of PEI/PIM-1 architectures, spin diffusion NMR studies were performed to suggest that PEI is well-dispersed within the PIM-1, allowing for rapid CO2 adsorption.

  18. Challenges and perspectives in using PIMS methodology to explain the success of the marketing strategy in businesses

    Directory of Open Access Journals (Sweden)

    Rubén-Martín Mosqueda Almanza

    2011-01-01

    Full Text Available Se asume que una estrategia adecuada impactará positivamente sobre las ganancias de las empresas y las llevará a expandirse. Recientes descubrimientos sugieren que sólo con la revisión y adecuación de los elementos más relevantes del plan estratégico es posible llevar los resultados económicos de la empresa a un punto óptimo. El impacto de la estrategia de mercado en las ganancias (PIMS, en inglés constituye un modelo arquetipo para lograrlo, sin embargo, subsisten problemas fundamentales en el modelo que lo limitan. Así, en el presente trabajo se hace un estudio exploratorio de la evolución de la metodología PIMS que permite develar los retos y el posible rumbo del tema. La definición de la estrategia, el diseño de la encuesta tipo PIMS, los problemas de multicolinealidad y el efecto de la cuota de mercado se plantean como los más relevantes. Los resultados muestran la necesidad de definir con precisión la estrategia asumida por la empresa, el rediseño de la encuesta PIMS cuando se aplique a mercados incompletos y, finalmente, se advierte un avance en el estudio econométrico de PIMS poniendo énfasis en la variable calidad relativa del producto para resolver el viejo dilema del efecto de la cuota de mercado.

  19. Fragment-hopping-based discovery of a novel chemical series of proto-oncogene PIM-1 kinase inhibitors.

    Directory of Open Access Journals (Sweden)

    Gustavo Saluste

    Full Text Available A new chemical series, triazolo[4,5-b]pyridines, has been identified as an inhibitor of PIM-1 by a chemotype hopping strategy based on a chemically feasible fragment database. In this case, structure-based virtual screening and in silico chemogenomics provide added value to the previously reported strategy of prioritizing among proposed novel scaffolds. Pairwise comparison between compound 3, recently discontinued from Phase I clinical trials, and molecule 8, bearing the selected novel scaffold, shows that the primary activities are similar (IC(50 in the 20 to 150 nM range. At the same time, some ADME properties (for example, an increase of more than 45% in metabolic stability in human liver microsomes and the off-target selectivity (for example, an increase of more than 2 log units in IC(50vs. FLT3 are improved, and the intellectual property (IP position is enhanced. The discovery of a reliable starting point that fulfills critical criteria for a plausible medicinal chemistry project is demonstrated in this prospective study.

  20. Comparison between the Requirements of Flowability and Moldability and the Shape Retention of PIM Compacts during Debinding Process

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    To successfully employ powder injection molding (PIM) as a manufacturing technique, the function of the component, design of the part, material and process should be optimized for overall processing ability of the PIM process. A comparison between the requirements of flowability and moldability and the compacts shape retention has been made in this work. There is often a contradiction between the requirements of flowability and the compacts shape retention. Many works have been done to attain good molding conditions. However, they fail to take into accountthe effect of some factors that satisfies good molding conditions on the compacts shape reten-tion during debinding. This paper studies the effect of the powder-binder mixture characteristicsand the molding conditions on the flowability and moldability and the shape retention of PIM compacts during debinding process so as to attain the benefits of each.

  1. Pim Kinase Interacts with Nonstructural 5A Protein and Regulates Hepatitis C Virus Entry

    OpenAIRE

    Park, Chorong; Min, Saehong; Park, Eun-Mee; Lim, Yun-Sook; Kang, Sangmin; Suzuki, Tetsuro; Shin, Eui-Cheol; Hwang, Soon B.

    2015-01-01

    The life cycle of hepatitis C virus (HCV) is highly dependent on host cellular proteins for virus propagation. In order to identify the cellular factors involved in HCV propagation, we performed protein microarray assay using the HCV nonstructural 5A (NS5A) protein as a probe. Of ∼9,000 human cellular proteins immobilized in a microarray, approximately 90 cellular proteins were identified as NS5A interactors. Of these candidates, Pim1, a member of serine/threonine kinase family composed of th...

  2. Polymer Inclusion Membranes (PIM) for the Recovery of Potassium in the Presence of Competitive Cations

    OpenAIRE

    2016-01-01

    Potassium is an important nutrient used in fertilizers but is not always naturally available  We investigated the properties of polymer inclusion membranes (PIM) regarding their selective recovery of K+ over competitive ions typically present in urine (Na+ and NH4+). The greatest flux was observed when the ratio of mass 2-nitrophenyl octyl ether (2-NPOE) used as plasticizer to cellulose triacetate (CTA) used as polymer was 0.25. The highest flux was achieved with a content of 24.8 wt % of dic...

  3. PimT, an amino acid exporter controls polyene production via secretion of the quorum sensing pimaricin-inducer PI-factor in Streptomyces natalensis

    Directory of Open Access Journals (Sweden)

    Guerra Susana M

    2009-06-01

    Full Text Available Abstract Background Polyenes represent a major class of antifungal agents characterised by the presence of a series of conjugated double bonds in their planar hydroxylated macrolide ring structure. Despite their general interest, very little is known about the factors that modulate their biosynthesis. Among these factors, we have recently discovered a new inducing compound (PI-factor in the pimaricin producer Streptomyces natalensis, which elicits polyene production in a manner characteristic of quorum sensing. Here, we describe the involvement of an amino-acid exporter from S. natalensis in modulating the expression of pimaricin biosynthetic genes via secretion of the quorum-sensing pimaricin-inducer PI-factor. Results Adjacent to the pimaricin gene cluster lies a member of the RhtB family of amino-acid exporters. Gene deletion and complementation experiments provided evidence for a role for PimT in the export of L-homoserine, L-serine, and L-homoserine lactone. Expression of the gene was shown to be induced by homoserine and by the quorum-sensing pimaricin-inducer PI-factor. Interestingly, the mutant displayed 65% loss of pimaricin production, and also 50% decrease in the production of PI, indicating that PimT is used as PI-factor exporter, and suggesting that the effect in antifungal production might be due to limited secretion of the inducer. Conclusion This report describes the involvement of an amino acid exporter (encoded by pimT in the vicinity of the pimaricin cluster in modulating the expression of antibiotic biosynthetic genes via secretion of the quorum-sensing pimaricin-inducer PI-factor. The discovery of the participation of amino acid exporters in a signal transduction cascade for the production of polyene macrolides is unexpected, and represents an important step forward towards understanding the regulatory network for polyene regulation. Additionally, this finding constitutes the first detailed characterization of an amino

  4. Inhibition of PIM1 kinase attenuates inflammation-induced pro-labour mediators in human foetal membranes in vitro.

    Science.gov (United States)

    Lim, Ratana; Barker, Gillian; Lappas, Martha

    2017-06-01

    Does proviral integration site for Moloney murine leukaemic virus (PIM)1 kinase play a role in regulating the inflammatory processes of human labour and delivery? PIM1 kinase plays a critical role in foetal membranes in regulating pro-inflammatory and pro-labour mediators. Infection and inflammation have strong causal links to preterm delivery by stimulating pro-inflammatory cytokines and collagen degrading enzymes, which can lead to rupture of membranes. PIM1 has been shown to have a role in immune regulation and inflammation in non-gestational tissues; however, its role has not been explored in the field of human labour. PIM1 expression was analysed in myometrium and/or foetal membranes obtained at term and preterm (n = 8-9 patients per group). Foetal membranes, freshly isolated amnion cells and primary myometrial cells were used to investigate the effect of PIM1 inhibition on pro-labour mediators (n = 5 patients per treatment group). Foetal membranes, from term and preterm, were obtained from non-labouring and labouring women, and from preterm pre-labour rupture of membranes (PPROM) (n = 9 per group). Amnion was collected from women with and without preterm chorioamnionitis (n = 8 per group). Expression of PIM1 kinase was determined by qRT-PCR and western blotting. To determine the effect of PIM1 kinase inhibition on the expression of pro-inflammatory and pro-labour mediators induced by bacterial products lipopolysaccharide (LPS) (10 μg/ml) and flagellin (1 μg/ml) and pro-inflammatory cytokine tumour necrosis factor (TNF) (10 ng/ml), chemical inhibitors SMI-4a (20 μM) and AZD1208 (50 μM) were used in foetal membrane explants and siRNA against PIM1 was used in primary amnion cells. Statistical significance was set at P pro-inflammatory cytokine interleukin-6 (IL6) and chemokines CXCL8 and CCL2 mRNA and release, prostaglandin prostaglandin F2α (PGF2α) release, adhesion molecule intercellular adhesion molecule 1 mRNA expression and release, and

  5. Exploiting the repertoire of CK2 inhibitors to target DYRK and PIM kinases.

    Science.gov (United States)

    Cozza, Giorgio; Sarno, Stefania; Ruzzene, Maria; Girardi, Cristina; Orzeszko, Andrzej; Kazimierczuk, Zygmunt; Zagotto, Giuseppe; Bonaiuto, Emanuela; Di Paolo, Maria Luisa; Pinna, Lorenzo A

    2013-07-01

    Advantage has been taken of the relative promiscuity of commonly used inhibitors of protein kinase CK2 to develop compounds that can be exploited for the selective inhibition of druggable kinases other than CK2 itself. Here we summarize data obtained by altering the scaffold of CK2 inhibitors to give rise to novel selective inhibitors of DYRK1A and to a powerful cell permeable dual inhibitor of PIM1 and CK2. In the former case one of the new compounds, C624 (naphto [1,2-b]benzofuran-5,9-diol) displays a potency comparable to that of the first-in-class DYRK1A inhibitor, harmine, lacking however the drawback of drastically inhibiting monoamine oxidase-A (MAO-A) as harmine does. On the other hand the promiscuous CK2 inhibitor 4,5,6,7-tetrabromo-1H-benzimidazole (TBI,TBBz) has been derivatized with a sugar moiety to generate a 1-(β-D-2'-deoxyribofuranosyl)-4,5,6,7-tetrabromo-1H-benzimidazole (TDB) compound which inhibits PIM1 and CK2 with comparably high efficacy (IC50 valuescancer cells consistent with concomitant inhibition of both its onco-kinase targets. This article is part of a Special Issue entitled: Inhibitors of Protein Kinases (2012).

  6. Polymer Inclusion Membranes (PIM for the Recovery of Potassium in the Presence of Competitive Cations

    Directory of Open Access Journals (Sweden)

    Anna Casadellà

    2016-03-01

    Full Text Available Potassium is an important nutrient used in fertilizers but is not always naturally available  We investigated the properties of polymer inclusion membranes (PIM regarding their selective recovery of K+ over competitive ions typically present in urine (Na+ and NH4+. The greatest flux was observed when the ratio of mass 2-nitrophenyl octyl ether (2-NPOE used as plasticizer to cellulose triacetate (CTA used as polymer was 0.25. The highest flux was achieved with a content of 24.8 wt % of dicyclohexan-18-crown-6 (DCH18C6 used as carrier, although the highest selectivity was observed with a content of 14.0 wt % of DCH18C6. We also studied whether the transport mechanism occurring in our system was based on co-transport of a counter-ion or ion exchange. Two different receiving phases (ultrapure water and 100 mM HCl were tested. Results on transport mechanisms suggest that co-transport of cations and anions is taking place across our PIMs. The membrane deteriorated and lost its properties when the receiving phase was acidic; we suggested that this was due to hydrolysis of CTA. The greatest flux and selectivity were observed in ultrapure water as receiving phase.

  7. The association of ERCC1 and Pim -1 with chemotherapeutic effectiveness in NSCLC%ERCC1和 Pim -1表达与非小细胞肺癌化疗疗效的相关性

    Institute of Scientific and Technical Information of China (English)

    梁绪中; 刘合代; 倪裕丰; 丁昭珩; 姜峰; 李文霞; 丁罡

    2015-01-01

    目的:探讨非小细胞肺癌(non -small cell lung cancer,NSCLC )患者肺癌组织标本中 ERCC1和Pim -1的表达与临床特征及化疗疗效的相关性。方法:对我院病理确诊的70例 NSCLC 患者肿瘤组织,通过实时定量荧光 PCR 法检测 ERCC1和 Pim -1基因 mRNA 表达水平,回顾性分析 ERCC1和Pim -1基因表达与临床病理关系、铂类化疗疗效和总生存情况。结果:70例 NSCLC 患者肿瘤组织中 ERCC1和 Pim -1高表达患者比率分别为37.14%(26/70)和61.43%(43/70),ERCC1高表达与性别、吸烟史、组织类型、TNM 分期均无关(P >0.05),Pim -1高表达与性别、吸烟史相关(P <0.05),而与组织类型、TNM分期无关(P >0.05)。ERCC1和 Pim -1共同高表达率为20.00%(14/70)。ERCC1高表达组患者化疗有效率(19.23%,5/26)显著低于低表达组患者(47.73%,21/44)(P <0.05)。Pim -1高表达组患者化疗有效率(34.88%,15/43)和低表达组患者(40.74%,11/27)无统计学差异(P >0.05)。ERCC1和 Pim -1高表达组的中位生存期(median survival time,MST)为27个月和24个月低于低表达组的33个月和27个月,但无统计学差异(P >0.05)。结论:NSCLC 患者中 ERCC1低表达组患者化疗有效率和存活率高,是化疗受益的指标。%Objective:To investigate the relationship of the expression of ERCC1 and Pim -1 with the clinical fac-tors and chemotherapeutic efficacy in patients with NSCLC.Methods:Seventy cases with NSCLC pathologically proven were analyzed retrospectively.The mRNA expressions of ERCC1 and Pim -1 were detected by Real -time quantita-tive PCR(RT -QPCR).The clinical factors and platinum -based chemotherapeutic efficacy in lung canser patients were observed.Results:The expression rates of ERCC1 and Pim -1 in patients with NSCLC were 37.14%(26 /70) and 61.43%(43 /70).The

  8. PIM kinase inhibition presents a novel targeted therapy against triple-negative breast tumors with elevated MYC expression

    Science.gov (United States)

    Horiuchi, Dai; Camarda, Roman; Zhou, Alicia Y.; Yau, Christina; Momcilovic, Olga; Balakrishnan, Sanjeev; Corella, Alexandra N.; Eyob, Henok; Kessenbrock, Kai; Lawson, Devon A.; Marsh, Lindsey A.; Anderton, Brittany N.; Rohrberg, Julia; Kunder, Ratika; Bazarov, Alexey V.; Yaswen, Paul; McManus, Michael T.; Rugo, Hope S.; Werb, Zena; Goga, Andrei

    2017-01-01

    Triple-negative breast cancer (TNBC), which lacks the expression of the estrogen, progesterone, and HER2 receptors, represents the breast cancer subtype with the poorest outcome1. No targeted therapy is available against this subtype due to lack of validated molecular targets. We previously reported that MYC signaling is disproportionally elevated in triple-negative (TN) tumors compared to receptor-positive (RP) tumors2. MYC is an essential, pleiotropic transcription factor that regulates the expression of hundreds of genes3. Direct inhibition of oncogenic MYC transcriptional activity has remained challenging4,5. The present study conducted an shRNA screen against all kinases to uncover novel MYC-dependent synthetic lethal combinations, and identified PIM1, a non-essential kinase. Here we demonstrate that PIM1 expression was elevated in TN tumors and was associated with poor prognosis in patients with hormone and HER2 receptor-negative tumors. Small molecule PIM kinase inhibitors halted the growth of human TN tumors with elevated MYC expression in patient-derived tumor xenograft (PDX) and MYC-driven transgenic breast cancer models by inhibiting oncogenic transcriptional activity of MYC while simultaneously restoring the function of the endogenous cell cycle inhibitor, p27. Our findings warrant clinical evaluation of PIM kinase inhibitors in patients with TN tumors that exhibit elevated MYC expression. PMID:27775705

  9. NFκB–Pim-1–Eomesodermin axis is critical for maintaining CD8 T-cell memory quality

    Science.gov (United States)

    Knudson, Karin M.; Saxena, Vikas; Altman, Amnon; Daniels, Mark A.; Teixeiro, Emma

    2017-01-01

    T-cell memory is critical for long-term immunity. However, the factors involved in maintaining the persistence, function, and phenotype of the memory pool are undefined. Eomesodermin (Eomes) is required for the establishment of the memory pool. Here, we show that in T cells transitioning to memory, the expression of high levels of Eomes is not constitutive but rather requires a continuum of cell-intrinsic NFκB signaling. Failure to maintain NFκB signals after the peak of the response led to impaired Eomes expression and a defect in the maintenance of CD8 T-cell memory. Strikingly, we found that antigen receptor [T-cell receptor (TCR)] signaling regulates this process through expression of the NFκB-dependent kinase proviral integration site for Moloney murine leukemia virus-1 (PIM-1), which in turn regulates NFκB and Eomes. T cells defective in TCR-dependent NFκB signaling were impaired in late expression of Pim-1, Eomes, and CD8 memory. These defects were rescued when TCR-dependent NFκB signaling was restored. We also found that NFκB–Pim-1 signals were required at memory to maintain memory CD8 T-cell longevity, effector function, and Eomes expression. Hence, an NFκB–Pim-1–Eomes axis regulates Eomes levels to maintain memory fitness. PMID:28193872

  10. Evaluation of the E mu-pim-1 transgenic mouse model for short-term carcinogenicity testing

    DEFF Research Database (Denmark)

    van Kreijl, C. F.; van Oordt, C. W. V.; Kroese, E. D.;

    1998-01-01

    . In the present article, the results from 2 recent short-term assays (with mitomycin C and x-rays) are briefly presented, together with a review of all 11 performed bioassays and their corresponding histopathologic and molecular data. The overall results allow the first evaluation of the E mu-pim-1 mouse model...

  11. Effect of bias voltage on TiAlSiN nanocomposite coatings deposited by HiPIMS

    Science.gov (United States)

    Ma, Quansheng; Li, Liuhe; Xu, Ye; Gu, Jiabin; Wang, Lei; Xu, Yi

    2017-01-01

    TiAlSiN nanocomposite coatings were deposited onto cemented carbide (WC-10 wt.%, Co) substrates by high power impulse magnetron sputtering (HiPIMS). The effect of substrate bias voltage on plasma discharge characterization of HiPIMS, element concentration, deposition rate, microstructure, surface/cross-sectional morphology, hardness and adhesion strength of coatings were studied. Compared with those deposited with direct current magnetic sputtering (DCMS), HiPIMS-deposited TiAlSiN coatings show improvements in some properties, including the surface roughness, the grain size, the hardness and adhesion strength, but a decrease in the deposition rate. When the bias voltage increases, the discharge current rose up from 118A to 165A. HiPIMS-deposited TiAlSiN coatings show a shift of the preferred crystallographic orientation from (220) to (200) and decreases in surface roughness from 14.1 nm down to 7.4 nm and grain size from 10.5 nm to 7.4 nm. Meanwhile, a change in crystal morphology from columnar to equiaxial and a grain refinement, as well as an increase of hardness from 30 GPa up to 42 GPa of those TiAlSiN coatings were observed with the increasing bias voltage and a decrease in adhesion strength from HF2 to HF5 of those coatings were revealed by indentation adhesion test.

  12. The 44 kDa Pim-1 kinase directly interacts with tyrosine kinase Etk/BMX and protects human prostate cancer cells from apoptosis induced by chemotherapeutic drugs.

    Science.gov (United States)

    Xie, Y; Xu, K; Dai, B; Guo, Z; Jiang, T; Chen, H; Qiu, Y

    2006-01-05

    Protein kinase Pim-1 has been implicated in the development of hematopoietic and prostatic malignancies. Here, we present the evidence that two isoforms, the 44 and 33 kDa Pim-1, are expressed in all human prostate cancer cell lines examined. The subcellular localization of human 44 kDa Pim-1 is primarily on the plasma membrane, while the 33 kDa isoform is present in both the cytosol and nucleus in PCA cells. The 44 kDa Pim-1 contains the proline-rich motif at the N-terminus and directly binds to the SH3 domain of tyrosine kinase Etk. Such interaction leads to the activation of Etk kinase activity possibly by competing with the tumor suppressor p53. This is corroborated by the fact that overexpression of the 44 kDa Pim-1 in prostate cancer cells confers the resistance to chemotherapeutic drugs. Our results suggest that these two isoforms of Pim-1 kinase may regulate distinct substrates and the 44 kDa Pim-1 may play a more prominent role in drug resistance in prostate cancer cells.

  13. Blockage of SSRP1/Ets-1/Pim-3 signalling enhances chemosensitivity of nasopharyngeal carcinoma to docetaxel in vitro.

    Science.gov (United States)

    Ai, Jingang; Li, Wei; Zeng, Ruifang; Xie, Zuozhong; Liu, Honghui; Hou, Minghua; Tan, Guolin

    2016-10-01

    Nasopharyngeal carcinoma (NPC) is a rare cancer in most parts of the world, but is prevalent in South China area. Besides, therapeutic outcome is still unsatisfactory for patients with refractory and relapsed NPC, even though receiving a second line of docetaxel-based chemotherapy. These reasons require a better understanding of mechanisms underlying the carcinogenesis, malignancy and chemoresistance. In the basis of our previous finding of SSRP1 over-expression in NPC cell lines, this study continuously discovered up-regulated Ets-1, phosphor-Ets-1 and Pim-3 in NPC tissues with immunohistochemistry assay and revealed a close correlation of these up-regulated proteins with NPC proliferation and invasion. Using gene-silencing technology followed by western blot and immunocytochemistry detections, SSRP1 was found to facilitate the translocation of phosphor-Ets-1 from cytoplasm to cell nucleus, but have marginal effect on Ets-1 expression and phosphorylation. Pim-3 was positively regulated by Ets-1. In NPC HNE-1 cells, all SSRP1, Ets-1 and Pim-3 knockdown diminished the cell proliferation, enhanced the apoptosis, as well as inhibited the autophagy, invasion and clonogenicity in the presence or absence of docetaxel at IC25. Exposure of HNE-1 cells to docetaxel (IC25) alone had modest effect on cell proliferation and autophagy, and was not as effective as docetaxel treatment after knockdown of SSRP1, Ets-1 or Pim-3 on induction of the apoptosis and on inhibition of the invasion and clonogenicity. Our data indicate that SSRP1/Ets-1/Pim-3 signalling is tightly associated with the proliferation, apoptosis, autophagy, invasion and clonogenicity of NPC cells, and blockage of this signalling facilitates chemosensitivity of the cells to docetaxel. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  14. Time of flight in MUSE at PIM1 at Paul Scherrer Institute

    Science.gov (United States)

    Lin, Wan; Gilman, Ronald; MUSE Collaboration

    2016-09-01

    The MUSE experiment at PIM1 at Paul Scherrer Institute in Villigen, Switzerland, measures elastic scattering of electrons and muons from a liquid hydrogen target. The intent of the experiment is to deduce whether the radius of the proton is the same when determined from the two different particle types. Precision timing is an important aspect of the experiment, used to determine particle types, reaction types, and beam momentum. Here we present results for a test setup measuring time of flight between prototypes of two detector systems to be used in the experiment, compared to Geant4 simulations. The results demonstrate time of flight resolution better than 100 ps, and beam momentum determination at the level of a few tenths of a percent. Douglass Project for Rutgers Women in Math, Science & Engineering, National Science Foundation Grant 1306126 to Rutgers University.

  15. Discharge state transition and cathode fall thickness evolution during chromium HiPIMS discharge

    Science.gov (United States)

    Zuo, Xiao; Ke, Peiling; Chen, Rende; Li, Xiaowei; Odén, Magnus; Wang, Aiying

    2017-08-01

    The temporal evolutions of target voltage and current waveforms under different pulse voltage and working pressure conditions were studied during Cr high power impulse magnetron sputtering discharges. Target voltage and current characteristics demonstrated that when the pulse width was set as 200 μs, HiPIMS discharge went through a four-stage sequence during each pulse, Townsend discharge, glow discharge, afterglow, and pulse-off stages. A discharge state transition in the glow discharge stage happened at high pulse voltage and working pressure conditions. Furthermore, the dependence of reduced cathode fall thickness pdc on pulse voltage, working pressure, and normalized current density j/p2 was presented. It was found that gas rarefaction leads to a change of relationship between pdc and j/p2. A noticeable increase of the cathode fall thickness caused by gas rarefaction has been found.

  16. Scaling and laws of DC discharges as pointers for HiPIMS plasmas

    CERN Document Server

    Maszl, Christian; von Keudell, Achim; Störi, Herbert

    2015-01-01

    Scaling or smiliarity laws of plasmas are of interest if lab size plasma sources are to be scaled for industrial processes. Ideally, the discharge parameters of the scaled plasmas are predictable and the fundamental physical processes are unaltered. Naturally, there are limitations and ranges of validity. Scaling laws for direct current glow discharges are well known. If a well diagnosed discharge is scaled, the field strength in the positive column, the gas amplification and the normal current density can easily be estimated. For non-stationary high power discharges like high power impulse magnetron sputtering (HiPIMS) plasmas, scaling is not as straight forward. Here, one deals with a non-stationary complex system with strong changes in plasma chemistry and symmetry breaks during the pulses. Because of the huge parameter space no good parameters are available to define these kind of discharges unambiguous at the moment. In this contribution we will discuss the scaling laws for DC glow discharges briefly and...

  17. Effect of thermo-mechanical properties of PIM feedstock on compacts shape retention during debinding process

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The removal of the binder from the powder compacts (debinding) can be a slow step and a source of problems. To improve the debinding process of powder injection molding operation, it's necessary to understand the thermal and mechanical properties of powder injection molding feedstocks and to find the major causes responsible for molding difficulties and compacts shape retention during debinding process. The effects of thermo-mechanical properties of the PIM feedstock on the compacts shape retention during debinding process were discussed and explained from practical point of view. The results indicate that the heat of fusion affects the cooling time. The binder component with high heat of fusion and high-decomposed temperature is more effective as the second binder component for the compact to retain its shape during debinding.

  18. Anomalous cross-B field transport and spokes in HiPIMS plasma

    Science.gov (United States)

    Hecimovic, A.

    2016-05-01

    Localized light emission patterns observed during on time of a high power impulse magnetron sputtering (HiPIMS) discharge on a planar magnetron, known as spokes or ionization zones, have been identified as a potential source of anomalous cross-B field diffusion. In this paper experimental evidence is presented that anomalous diffusion is triggered by the appearance of spokes. The Hall parameter {ω\\text{ce}}{τ\\text{c}} , product of the electron cyclotron frequency and the classical collision time, reduces from Bohm diffusion values (∼ 16 and higher) down to the value of 3 as spokes appear, indicating anomalous cross-B field transport. A combination of intensified charge coupled device imaging and electric probe measurements reveals that the ions from the spokes are instantaneously diffusing away from the target. The ion diffusion coefficients calculated from a sideways image of the spoke are six times higher than Bohm diffusion coefficients, which is consistent with the reduction of the Hall parameter.

  19. Biased HiPIMS technology for superconducting rf accelerating cavities coating

    CERN Document Server

    G. Rosaz, G.; Sonato, D.; Calatroni, S.; Ehiasarian, A.; Junginger, T.; Taborelli, M.

    2016-01-01

    In the last few years the interest of the thin film science and technology community on High Impulse Power Magnetron Sputtering (HIPIMS) coatings has steadily increased. HIPIMS literature shows that better thin film morphology, denser and smoother films can be achieved when compared with standard dc Magnetron Sputtering (dcMS) coating technology. Furthermore the capability of HIPIMS to produce a high quantity of ionized species can allow conformal coatings also for complex geometries. CERN already studied the possibility to use such a coating method for SRF accelerating cavities. Results are promising but not better from a RF point of view than dcMS coatings. Thanks to these results the next step is to go towards a biased HiPIMS approach. However the geometry of the cavities leads to complex changes in the coating setup in order to apply a bias voltage. Coating system tweaking and first superconducting properties of biased samples are presented.

  20. Use of copper(I) catalyzed azide alkyne cycloaddition (CuAAC) for the preparation of conjugated pyrrolo[2,3-a]carbazole Pim kinase inhibitors.

    Science.gov (United States)

    Letribot, Boris; Akué-Gédu, Rufine; Santio, Niina M; El-Ghozzi, Malika; Avignant, Daniel; Cisnetti, Federico; Koskinen, Päivi J; Gautier, Arnaud; Anizon, Fabrice; Moreau, Pascale

    2012-04-01

    We have previously demonstrated that pyrrolo[2,3-a]carbazole-3-carbaldehydes are potent Pim kinase inhibitors with in vitro antiproliferative activities. In the present study, we report the synthesis of new pyrrolocarbazoles substituted at the N-10 position. When their ability to inhibit Pim kinase activities were evaluated in in vitro assays, we observed that this nitrogen atom can be substituted without loss of Pim-1 and Pim-3 inhibitory potencies. Moreover, when we added a fluorescent dansyl group (compound 13), we were able to show that 13 penetrates the plasma membrane and enters the cytoplasm. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  1. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos® IL 104

    OpenAIRE

    2015-01-01

    Abstract: Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of A...

  2. Ethylene/ethane permeation, diffusion and gas sorption properties of carbon molecular sieve membranes derived from the prototype ladder polymer of intrinsic microporosity (PIM-1)

    KAUST Repository

    Salinas, Octavio

    2016-01-05

    Fine-tuning the microporosity of PIM-1 by heat treatment was applied to develop a suitable carbon molecular sieve membrane for ethylene/ethane separation. Pristine PIM-1 films were heated from 400 to 800 °C under inert N2 atmosphere (< 2 ppm O2). At 400 °C, PIM-1 self-cross-linked and developed polar carbonyl and hydroxyl groups due to partial dioxane splitting in the polymer backbone. Significant degradation occurred at 600 °C due to carbonization of PIM-1 and resulted in 30% increase in cumulative surface area compared to its cross-linked predecessor. In addition, PIM-1-based CMS developed smaller ultramicropores with increasing pyrolysis temperature, which enhanced their molecular sieving capability by restricted diffusion of ethylene and ethane through the matrix due to microstructural carbon densification. Consequently, the pure-gas ethylene permeability (measured at 35 °C and 2 bar) decreased from 1600 Barrer for the pristine PIM-1 to 1.3 Barrer for the amorphous carbon generated at 800 °C, whereas the ethylene/ethane pure-gas selectivity increased significantly from 1.8 to 13.

  3. Experimental Analysis of the Fault Tolerance of the PIM-SM IP Multicast Routing Protocol under GNS3

    Directory of Open Access Journals (Sweden)

    Gábor Lencse

    2014-06-01

    Full Text Available PIM-SM is the most commonly used IP multicast routing protocol in IPTV systems. Its fault tolerance is examined by experimenting on a mesh topology multicast test network built up by Cisco routers under GNS3. Different fault scenarios are played and different parameters of the PIM-SM and of the OSPF protocols are examined if they influence and how they influence the outage time of an IPTV service. The failure of the Rendezvous Point (RP of the given IP multicast group as well as the complete failure of a router in the media forwarding path of the multicast stream are examined. A method is given how the service outage time caused by the complete failure of a router can be limited by an appropriate choice of the Dead Interval parameter of OSPF.

  4. Investigation of neutral and ion dynamics in a HiPIMS plasma by tunable laser diode absorption spectroscopy (TDLAS)

    Science.gov (United States)

    Preissing, Patrick; Hecimovic, Ante; von Keudell, Achim

    2016-09-01

    High power impulse magnetron sputtering (HiPIMS) discharges are known for complex plasma interactions, and complex temporal and spatial dynamics. Spatial and temporal dynamic of argon metastable (Arm), Ti atom (Ti0) and Ti ion (Ti+) density and temperature is studied by an extended tunable diode laser absorption spectroscopy setup (TDLAS) during a HiPIMS pulse. The TDLAS setup used a beam expander in combination with a 6 photo diode array to simultaneously measure spatial (resolution 5 mm) and time resolved absorption profiles of an Arm, Ti0 and Ti+ transition. This in combination with moving the magnetron in axial direction gives a complete 2D map of the density evolution. Temporal resolution of 400 ns was achieved by recording the photo diode signal on the National Instruments card. Final results allowed to investigate temporal evolution of the observed species in the volume between the target and the substrate.

  5. Material Characterization of Strontium Ferrite Powders for Producing Sintered Magnets by Ceramic Injection Molding (MagnetPIM

    Directory of Open Access Journals (Sweden)

    Dietmar Drummer

    2014-01-01

    Full Text Available For this study, different strontium ferrite powders were mixed with a filling ratio of about 60 vol% in a binder system and formed into green compacts. During the process of injection molding, a magnetic field was generated in the tool via a magnetic coil, which enables magnetization and orientation of the ceramic particles. All powders were successfully processed by MagnetPIM. The investigations identified that it is impossible to extrapolate from the magnetic properties of a green compact to the magnetic properties of a sintered part. It became obvious, though, that, when producing very strong magnetic parts by MagnetPIM, the best results can be obtained by using powders with small particle sizes.

  6. Material Characterization of Strontium Ferrite Powders for Producing Sintered Magnets by Ceramic Injection Molding (MagnetPIM)

    OpenAIRE

    Dietmar Drummer; Susanne Messingschlager

    2014-01-01

    For this study, different strontium ferrite powders were mixed with a filling ratio of about 60 vol% in a binder system and formed into green compacts. During the process of injection molding, a magnetic field was generated in the tool via a magnetic coil, which enables magnetization and orientation of the ceramic particles. All powders were successfully processed by MagnetPIM. The investigations identified that it is impossible to extrapolate from the magnetic properties of a green compact t...

  7. Expression of pim-1 in tumors, tumor stroma and tumor-adjacent mucosa co-determines the prognosis of colon cancer patients.

    Science.gov (United States)

    Peng, Yong-hai; Li, Jian-jun; Xie, Fang-wei; Chen, Jian-fang; Yu, Ying-hao; Ouyang, Xue-nong; Liang, Hou-jie

    2013-01-01

    Provirus integration site for Moloney murine leukemia virus (pim-1) is a proto-oncogene that is linked to the development and progression of several cancers. In this study, we evaluated pim-1 expression in tumors, tumor stroma and tumor-adjacent mucosa together as an independent prognostic factor for colon cancer patients. The study included 343 colon cancer patients. Immunohistochemical staining was used to detect pim-1. Multivariate cox regression for disease-free survival (DFS) were used to identify independent prognostic factors. Analytic hierarchy process (AHP) was used to calculate the weight of pim-1 in tumors, tumor stroma and tumor-adjacent mucosa in order to obtain a Pim-1 total score (PTS) for recurrence and survival. Kaplan-Meier DFS curves and OS curves for patients with different pim-1 expression levels were compared using the log-rank test. In this study, four independent prognostic factors were identified for colon cancer patients: pim-1 expression in tumors, tumor stroma, tumor-adjacent mucosa, as well as tumor stage. It has been established that clinical stage is an important prognostic factor for colon cancer patients. However, PTS can identify the patients who are likely to recur not only in the whole radical excision group but also within each stage of this group. Based on the results of this study we can conclude that the PTS combined with clinical staging system may be a better predictor of colon cancer patients' prognosis than using the clinical stage system alone. ClinicalTrials.gov Number: ChiCTR-PRCH-12002842.

  8. Low-temperature plasma nitriding of sintered PIM 316L austenitic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Aecio Fernando; Scheuer, Cristiano Jose; Joanidis, Ioanis Labhardt; Cardoso, Rodrigo Perito; Mafra, Marcio; Klein, Aloisio Nelmo; Brunatto, Silvio Francisco, E-mail: brunatto@ufpr.br [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Engenharia Mecanica. Grupo de Tecnologia de Fabricacao Assistida pro Plasma e Metalurgia do Po

    2014-08-15

    This work reports experimental results on sintered PIM 316L stainless steel low-temperature plasma nitriding. The effect of treatment temperature and time on process kinetics, microstructure and surface characteristics of the nitrided samples were investigated. Nitriding was carried out at temperatures of 350, 380, 410 and 440 °C , and times of 4, 8 and 16 h, using a gas mixture composed by 60% N2 + 20% H2 + 20% Ar, at a gas flow rate of 5.00 X 10{sup 6} Nm{sup 3-1}, and a pressure of 800 Pa. The treated samples were characterized by scanning electron microscopy, X-ray diffractometry and microhardness measurements. Results indicate that low-temperature plasma nitriding is a diffusion controlled process. The calculated activation energy for nitrided layer growth was 111.4 kJmol{sup -1}. Apparently precipitation-free layers were produced in this study. It was also observed that the higher the treatment temperature and time the higher is the obtained surface hardness. Hardness up to 1343 HV{sub 0.025} was verified for samples nitrided at 440 °C. Finally, the characterization of the treated surface indicates the formation of cracks, which were observed in regions adjacent to the original pores after the treatment. (author)

  9. Data reconciliation using PIMs historical data: a simple and low cost approach

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, Conrad A.A.; Oliveira, Elcio Cruz de [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2009-12-19

    The procedure known as data reconciliation is based on measurement adjustments so that the resulting values fit within the conservation laws and the restrictions imposed by the process. The classical general data reconciliation problem deals with a weighted least-squares minimization of the measurement adjustments subject to the model constraints. The reconciliation technique allows that two or more experimental redundant measurements can be reconciled to a single value, a better representation of the quantity to be analyzed, minimizing the measurement uncertainty. A critical step in this process is the acquisition and storage of long-term data. There are commercial applications available to solve this problem, although in many cases they don't apply to the plants particularities and, in cases they do, the presented solution is usually more complex and expensive. The purpose of this work was to develop a custom tool for volume data reconciliation on oil products storage and transportation plants using the process data stored on a PIMS server. The platform chosen for this development was an Excel environment. The main novelty presented in this tool is the intrinsic simplicity gained by using an Excel environment, due to its wide range usage facilitating the customization for different plants without extra costs for the company. (author)

  10. Perspective: Is there a hysteresis during reactive High Power Impulse Magnetron Sputtering (R-HiPIMS)?

    Science.gov (United States)

    Strijckmans, K.; Moens, F.; Depla, D.

    2017-02-01

    This paper discusses a few mechanisms that can assist to answer the title question. The initial approach is to use an established model for DC magnetron sputter deposition, i.e., RSD2013. Based on this model, the impact on the hysteresis behaviour of some typical HiPIMS conditions is investigated. From this first study, it becomes clear that the probability to observe hysteresis is much lower as compared to DC magnetron sputtering. The high current pulses cannot explain the hysteresis reduction. Total pressure and material choice make the abrupt changes less pronounced, but the implantation of ionized metal atoms that return to the target seems to be the major cause. To further substantiate these results, the analytical reactive sputtering model is coupled with a published global plasma model. The effect of metal ion implantation is confirmed. Another suggested mechanism, i.e., gas rarefaction, can be ruled out to explain the hysteresis reduction. But perhaps the major conclusion is that at present, there are too little experimental data available to make fully sound conclusions.

  11. Manufacturing and characterization of PIM-W materials as plasma facing materials

    Science.gov (United States)

    Pintsuk, G.; Antusch, S.; Rieth, M.; Wirtz, M.

    2016-02-01

    Powder injection molding (PIM) was used to produce pure and particle reinforced W materials to be qualified for the use as plasma facing material. As alloying elements La2O3, Y2O3, TiC, and TaC were chosen with a particle size between 50 nm and 2.5 μm, depending on the alloying element. The fabrication of alloyed materials was done for different compositions using powder mixtures. Final sintering was performed in H2 atmosphere at 2400 °C resulting in plates of 55 × 22 × 4 mm3 with ˜98% theoretical density. The qualification of the materials was done via high heat flux testing in the electron beam facility JUDITH-1. Thereby, ELM-like 1000 thermal shock loads of 0.38 GW m-2 for 1 ms and 100 disruption like loads of 1.13 GW m-2 for 1 ms at a base temperature of 1000 °C were applied. The obtained damage characteristics, i.e. surface roughening and crack formation, were qualified versus an industrially manufactured pure reference tungsten material and linked to the material’s microstructure and mechanical properties.

  12. Comparação entre dois escores de prognóstico (PRISM e PIM em unidade de terapia intensiva pediátrica Comparison of two prognostic scores (PRISM and PIM at a pediatric intensive care unit

    Directory of Open Access Journals (Sweden)

    Vanessa Feller Martha

    2005-06-01

    Full Text Available OBJETIVO: Comparar o desempenho do PRISM (Pediatric Risk of Mortality e o PIM (Pediatric Index of Mortality em uma unidade de terapia intensiva pediátrica geral investigando a relação existente entre a mortalidade e a sobrevivência observadas com a mortalidade e sobrevivência estimadas pelos dois escores. MÉTODOS: Estudo de coorte contemporâneo realizado entre 1° de junho de 1999 a 31 de maio de 2000 na unidade de terapia intensiva pediátrica do Hospital São Lucas da Pontifícia Universidade Católica do Rio Grande do Sul. Os critérios de inclusão no estudo e o cálculo do PRISM e do PIM foram feitos conforme preconizado e utilizando as fórmulas de seus artigos originais. Para estatística, utilizou-se o teste z de Flora, teste de ajuste de Hosmer-Lemeshow, área sob a curva típica de um recebedor operador de características (curva ROC e teste de correlação de Spearman. O estudo foi aprovado pelo Comitê da instituição. RESULTADOS: Internaram na unidade de terapia intensiva pediátrica 498 pacientes, sendo 77 excluídos. Dos 421 pacientes estudados, 33 (7,83% foram a óbito. A mortalidade estimada pelo PRISM foi de 30,84 (7,22%, com standardized mortality rate 1,07 (0,74-1,50, z = -0,45. Pelo PIM, foi de 26,13 (6,21%, com standardized mortality rate 1,26 (0,87-1,77, z = -1,14. O teste de ajuste de Hosmer-Lemeshow obteve um qui-quadrado 9,23 (p = 0,100 para o PRISM e 27,986 (p OBJECTIVE: To compare the performance of the PRISM (Pediatric Risk of Mortality and the PIM (Pediatric Index of Mortality scores at a general pediatric intensive care unit, investigating the relation between observed mortality and survival and predicted mortality and survival. METHODS: A contemporary cohort study undertaken between 1 June 1999 and 31 May 2000 at the Pontifícia Universidade Católica do Rio Grande do Sul, Hospital São Lucas pediatric intensive care unit. The inclusion criteria and the PRISM and PIM calculations were performed as set out

  13. Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part

    DEFF Research Database (Denmark)

    Quagliotti, Danilo; Salaga, Jacek; Tosello, Guido

    2016-01-01

    Two sets of 5 green and 5 sintered mechanical parts, manufactured by micro powder injection moulding (μPIM), were measured using an optical coordinate measuring machine (OCMM) and a focus-variation microscope (FVM). The examined features of size, including diameter, radii and distances, span...... geometrical features, such as surface texture and flatness, may depict FVM measurements as more attractive. However, measurements should be suitable for in-line quality control, in a production environment, where fast cycle time is required and measuring times are more compatible to those of the OCMM....

  14. Relationship between binder contents and mechanical properties of 17-4 ph stainless steel fabricated by PIM process and sintering

    Science.gov (United States)

    Khalil, K. A.; Kim, Sug Won

    2006-04-01

    Mechanical properties and microstructures of 17-4 ph stainless steel parts produced using different binder contents (powder loading) of powder injection molding (PIM) feedstock have been studied. The tensile and wear properties have been evaluated. Wear tests were conducted by a pin-on-disk tribometer, without lubricant, at different loads and sliding distance. SEM examination of the fracture sufaces revealed good particle bonding and a high ductile fracture surface for high powder loading. The surface fractures of the bars with higher powder loading show a closed porosity. High performance properties such as fully dense, ultimate tensile strength, hardness and wear resistance are obtained with high powder loading.

  15. The characteristic shape of emission profiles of plasma spokes in HiPIMS: the role of secondary electrons

    CERN Document Server

    Hecimovic, A; Brinkmann, R -P; Böke, M; Winter, J

    2013-01-01

    A time resolved analysis of the emission of HiPIMS plasmas reveals inhomogeneities in the form of rotating spokes. The shape of these spokes is very characteristic depending on the target material. The localized enhanced light emission has been correlated with the ion production. Based on these data, the peculiar shape of the emission profiles can be explained by the localized generation of secondary electrons, resulting in an energetic electron pressure exceeding the magnetic pressure. This general picture is able to explain the observed emission profile for different target materials including gas rarefaction and second ionization potential of the sputtered elements.

  16. Identification of the first inhibitor of the GBP1:PIM1 interaction. Implications for the development of a new class of anticancer agents against paclitaxel resistant cancer cells.

    Science.gov (United States)

    Andreoli, Mirko; Persico, Marco; Kumar, Ajay; Orteca, Nausicaa; Kumar, Vineet; Pepe, Antonella; Mahalingam, Sakkarapalayam; Alegria, Antonio E; Petrella, Lella; Sevciunaite, Laima; Camperchioli, Alessia; Mariani, Marisa; Di Dato, Antonio; Novellino, Ettore; Scambia, Giovanni; Malhotra, Sanjay V; Ferlini, Cristiano; Fattorusso, Caterina

    2014-10-09

    Class III β-tubulin plays a prominent role in the development of drug resistance to paclitaxel by allowing the incorporation of the GBP1 GTPase into microtubules. Once in the cytoskeleton, GBP1 binds to prosurvival kinases such as PIM1 and initiates a signaling pathway that induces resistance to paclitaxel. Therefore, the inhibition of the GBP1:PIM1 interaction could potentially revert resistance to paclitaxel. A panel of 44 4-azapodophyllotoxin derivatives was screened in the NCI-60 cell panel. The result is that 31 are active and the comparative analysis demonstrated specific activity in paclitaxel-resistant cells. Using surface plasmon resonance, we were able to prove that NSC756093 is a potent in vitro inhibitor of the GBP1:PIM1 interaction and that this property is maintained in vivo in ovarian cancer cells resistant to paclitaxel. Through bioinformatics, molecular modeling, and mutagenesis studies, we identified the putative NSC756093 binding site at the interface between the helical and the LG domain of GBP1. According to our results by binding to this site, the NSC756093 compound is able to stabilize a conformation of GBP1 not suitable for binding to PIM1.

  17. Pim-1 kinase inhibits the activation of reporter gene expression in Elk-1 and c-Fos reporting systems but not the endogenous gene expression: an artifact of the reporter gene assay by transient co-transfection

    Directory of Open Access Journals (Sweden)

    Yan B.

    2006-01-01

    Full Text Available We have studied the molecular mechanism and signal transduction of pim-1, an oncogene encoding a serine-threonine kinase. This is a true oncogene which prolongs survival and inhibits apoptosis of hematopoietic cells. In order to determine whether the effects of Pim-1 occur by regulation of the mitogen-activated protein kinase pathway, we used a transcriptional reporter assay by transient co-transfection as a screening method. In this study, we found that Pim-1 inhibited the Elk-1 and NFkappaB transcriptional activities induced by activation of the mitogen-activated protein kinase cascade in reporter gene assays. However, Western blots showed that the induction of Elk-1-regulated expression of endogenous c-Fos was not affected by Pim-1. The phosphorylation and activation of neither Erk1/2 nor Elk-1 was influenced by Pim-1. Also, in the gel shift assay, the pattern of endogenous NFkappaB binding to its probe was not changed in any manner by Pim-1. These data indicate that Pim-1 does not regulate the activation of Erk1/2, Elk-1 or NFkappaB. These contrasting results suggest a pitfall of the transient co-transfection reporter assay in analyzing the regulation of transcription factors outside of the chromosome context. It ensures that results from reporter gene expression assay should be verified by study of endogenous gene expression.

  18. Comparison of the structural properties and residual stress of AlN films deposited by dc magnetron sputtering and high power impulse magnetron sputtering at different working pressures

    Energy Technology Data Exchange (ETDEWEB)

    Ait Aissa, K.; Achour, A., E-mail: a_aminph@yahoo.fr; Camus, J.; Le Brizoual, L.; Jouan, P.-Y.; Djouadi, M.-A.

    2014-01-01

    Aluminium nitride (AlN) films were deposited by dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS) on (100) oriented silicon (Si) substrates, in Ar–N{sub 2} gas mixture, at different working pressures. The films were characterized using X-ray diffraction (XRD), profilometer and transmission electron microscopy (TEM). The effect of the sputtering pressure on the structure, the residual stress and the deposition rate of AlN films deposited by the two processes (dcMS and HiPIMS) was investigated. It was found that the deposition rate is always lower in HiPIMS compared to dcMS. The AlN films are textured along (002) direction in both cases of dcMS and HiPIMS as it is indicated by XRD measurements, with residual stresses which are more important in the case of films deposited by HiMIPS. These residual stresses decrease with the sputtering pressure increase, especially in the case of the films deposited by HiPIMS. TEM analyses have shown a local epitaxial growth of AlN on the Si substrate which would favour thermal evacuation improvement of AlN as thermal interface material. - Highlights: • Highly c-axis oriented AlN films were obtained. • dc magnetron sputtering and high power impulse magnetron sputtering (HiMIPS) were used. • Abrupt interface between AlN and silicon substrate was obtained by HiPIMS.

  19. Time of flight and the MUSE experiment in the PIM1 Channel at the Paul Sherrer Institute

    Science.gov (United States)

    Lin, Wan; MUSE Collaboration

    2015-10-01

    The MUSE experiment in the PIM1 Channel at the Paul Sherrer Institute in Villigen, Switzerland, measures scattering of electrons and muons from a liquid hydrogen target. The intent of the experiment is to deduce from the scattering probabilities whether the radius of the proton is the same when determined from the scattering of the two different particle types. An important technique for the experiment is precise timing measurements, using high precision scintillators and a beam Cerenkov counter. We will describe the motivations for the precise timing measurement. We will present results for the timing measurements from prototype experimental detectors. We will also present results from a simulation program, Geant4, that was used to calculate energy loss corrections to the time of flight determined between the beam Cherenkov counter and the scintillator. This work is supported in part by the U.S. National Science Foundation Grant PHY 1306126 and the Douglass Project for Women in Math, Science, and Engineering.

  20. Comparison of measurements from optical CMM and focus-variation microscope of a μPIM mechanical part

    DEFF Research Database (Denmark)

    Quagliotti, Danilo; Salaga, Jacek; Tosello, Guido

    2016-01-01

    Two sets of 5 green and 5 sintered mechanical parts, manufactured by micro powder injection moulding (μPIM), were measured using an optical coordinate measuring machine (OCMM) and a focus-variation microscope (FVM). The examined features of size, including diameter, radii and distances, span...... in the range of (10-1–101) mm. Comparing the corresponding measurements from the two instruments, a relative maximum deviation of 8 % was found for the linear dimensions of the green parts and a relative maximum deviation of 6 % for the ones of the sintered parts. The maximum relative deviation of the radii...... was 17 % for the green parts and 30 % for the sintered parts (relative deviations have been evaluated considering focus-variation measurements as reference).OCMM showed some problems in the detection of the smallest dimensional features (above all radii) where the presence of defects on the edges, quite...

  1. STUDY OF PRIOR PREPAREDNESS AND AWARENESS REGARDING THE MBBS COURSE AMONGST FIRST YEAR STUDENTS ADMITTED AT RURAL MEDICAL COLLEGE, OF PIMS-DU, LONI

    OpenAIRE

    Padmanabhan P, Kunkulol R, Jangle SN

    2015-01-01

    Background: Adolescents in India choose career in medicine under the influence and pressure from parents, family members, peers and external sources. There are no measures taken to study whether these medical students understand the demands and priorities of a career in medicine once they decide to choose it. Hence the study was undertaken at PIMS-DU with Ist year MBBS students as participants. Aims: 1) Assess the factors influencing the choice of MBBS. 2) Analyze the prior knowledge and awar...

  2. Extraction of Gold(III) from Hydrochloric Acid Solutions with a PVC-based Polymer Inclusion Membrane (PIM) Containing Cyphos(®) IL 104.

    Science.gov (United States)

    Bonggotgetsakul, Ya Ya Nutchapurida; Cattrall, Robert W; Kolev, Spas D

    2015-12-08

    Poly(vinyl chloride) (PVC) based polymer inclusion membranes (PIMs), with different concentrations of Cyphos® IL 104 as the membrane extractant/carrier, were studied for their ability to extract Au(III) from hydrochloric acid solutions. Some of the PIMs also contained one of the following plasticizers or modifiers: 2-nitrophenyloctyl ether, dioctylphthalate, 1-dodecanol, 1-tetradecanol, or tri(2-ethylhexyl) phosphate. The best performance, in terms of extraction rate and amount of Au(III) extracted, was exhibited by a PIM consisting of 25 wt% Cyphos(®) IL 104, 5 wt% 1-dodecanol, and 70 wt% PVC. An almost complete back-extraction of the Au(III) extracted from this membrane was achieved by using a 0.10 mol L(-1) Na₂SO₃ receiver solution at pH 8. The stoichiometry of the extracted Au(III)/Cyphos® IL 104 adduct was determined as [P]⁺ [AuCl₄](-) H⁺ [PO₂](-) where [P]⁺ and [PO₂](-) represent trihexyl(tetradecyl) phosphonium and bis(2,4,4-trimethylpentyl) phosphinate ions, respectively. Back-extraction of Au(III) is suggested to occur by reduction of Au(III) to Au(I), with the formation of the species [Au(SO₃)₂](3-) in the aqueous receiver solution. Loss of 1-dodecanol from the newly developed PIM to the aqueous solutions in contact with it was observed, which indicated that this membrane was suitable for single use in the efficient recovery of Au(III) from hydrochloric acid solutions of electronic scrap or recycled jewelry.

  3. Research of PIM to PSM Transformation Mechanism in Cloud Computing Environment%云计算环境下PIM与PSM的转化机制的研究

    Institute of Scientific and Technical Information of China (English)

    解绍词; 葛君伟

    2011-01-01

    On MDA--based cloud computing platform of software development, aiming at the problems of PIM to PSM reliability transformation, discuss and research the software development modeling process on MDA-based cloud computing environment, PIM and PSM model storage and interface form, and the PIM to PSM reliability transformation mechanism, the model of modeling software development on MDA-based cloud computing environment were presented, and the key technology search for the next step to study are mentioned.%针对基于MDA的云计算软件开发平台下,PIM到PSM之间可靠性转化问题,讨论和研究了基于MI)A的云环境软件开发建模过程、PIM与PSM模型存储与接口形式和MDA的PIM可靠准确转换成PSM的转换机制,给出了基于MDA的云环境软件开发建模模型,并对下一步需要研究的关键技术进行了展望.

  4. Structure and transport properties of LiF-BeF2 mixtures: Comparison of rigid and polarizable ion potentials

    Indian Academy of Sciences (India)

    B Shadrack Jabes; Manish Agarwal; Charusita Chakravarty

    2012-01-01

    Molecular dynamics simulations are performed to study the structure and dynamics of the LiF-BeF2 system over a range of compositions using the transferable rigid-ion model (TRIM). The densities obtained with the TRIM potential are approximately 17-20% lower than the experimental values while polarizable ion models (PIM) give densities within 5% of the experimental value. The TRIM and PIM potentials give essentially identical radial distribution functions (RDFs) for Li-F and Be-F ion pairs though the Be-Be pair correlations differ significantly and reflect the corresponding density differences. The variation in the radial distribution functions with concentration, particularly the anion-anion pair correlation function, reflects the reorganization of the fluoride ions as the addition of BeF2 in the mixture promotes the formation of the tetrahedral fluoroberyllate network. Along the 67 mol% LiF isopleth, diffusivities and Nernst-Einstein ionic conductivities from simulations using the PIM and TRIM potentials are in good agreement for temperatures up to 925 K. The viscosity data using the PIM model is also found to be in good agreement with the TRIM results presented here along the 873K isotherm for compositions ranging from 0 to 50 mol% BeF2. The main conclusion from this study is that the non-polarizable, TRIM provides reasonable results for the structural correlations and transport properties of the LiF-BeF2 system in comparison with first-principles-based, PIM.

  5. MicroRNA-16 is down-regulated in mutated FLT3 expressing murine myeloid FDC-P1 cells and interacts with Pim-1.

    Directory of Open Access Journals (Sweden)

    Kyu-Tae Kim

    Full Text Available Activating mutations in the receptor tyrosine kinase FLT3 are one of the most frequent somatic mutations in acute myeloid leukemia (AML. Internal tandem duplications of the juxtamembrane region of FLT3 (FLT3/ITD constitutively activate survival and proliferation pathways, and are associated with a poor prognosis in AML. We suspected that alteration of small non-coding microRNA (miRNA expression in these leukemia cells is involved in the transformation process and used miRNA microarrays to determine the miRNA signature from total RNA harvested from FLT3/ITD expressing FDC-P1 cells (FD-FLT3/ITD. This revealed that a limited set of miRNAs appeared to be affected by expression of FLT3/ITD compared to the control group consisting of FDC-P1 parental cells transfected with an empty vector (FD-EV. Among differentially expressed miRNAs, we selected miR-16, miR-21 and miR-223 to validate the microarray data by quantitative real-time RT-PCR showing a high degree of correlation. We further analyzed miR-16 expression with FLT3 inhibitors in FLT3/ITD expressing cells. MiR-16 was found to be one of most significantly down-regulated miRNAs in FLT3/ITD expressing cells and was up-regulated upon FLT3 inhibition. The data suggests that miR-16 is acting as a tumour suppressor gene in FLT3/ITD-mediated leukemic transformation. Whilst miR-16 has been reported to target multiple mRNAs, computer models from public bioinformatic resources predicted a potential regulatory mechanism between miR-16 and Pim-1 mRNA. In support of this interaction, miR-16 was shown to suppress Pim-1 reporter gene expression. Further, our data demonstrated that over-expression of miR-16 mimics suppressed Pim-1 expression in FD-FLT3/ITD cells suggesting that increased miR-16 expression contributes to depletion of Pim-1 after FLT3 inhibition and that miR-16 repression may be associated with up-regulated Pim-1 in FLT3/ITD expressing cells.

  6. Characterization of the aodA, dnmA, mnSOD and pimA genes in Aspergillus nidulans.

    Science.gov (United States)

    Leiter, Éva; Park, Hee-Soo; Kwon, Nak-Jung; Han, Kap-Hoon; Emri, Tamás; Oláh, Viktor; Mészáros, Ilona; Dienes, Beatrix; Vincze, János; Csernoch, László; Yu, Jae-Hyuk; Pócsi, István

    2016-02-05

    Mitochondria play key roles in cellular energy generation and lifespan of most eukaryotes. To understand the functions of four nuclear-encoded genes predicted to be related to the maintenance of mitochondrial morphology and function in Aspergillus nidulans, systematic characterization was carried out. The deletion and overexpression mutants of aodA, dnmA, mnSOD and pimA encoding alternative oxidase, dynamin related protein, manganese superoxide dismutase and Lon protease, respectively, were generated and examined for their growth, stress tolerances, respiration, autolysis, cell death, sterigmatocystin production, hyphal morphology and size, and mitochondrial superoxide production as well as development. Overall, genetic manipulation of these genes had less effect on cellular physiology and ageing in A. nidulans than that of their homologs in another fungus Podospora anserina with a well-characterized senescence. The observed interspecial phenotypic differences can be explained by the dissimilar intrinsic stabilities of the mitochondrial genomes in A. nidulans and P. anserina. Furthermore, the marginally altered phenotypes observed in A. nidulans mutants indicate the presence of effective compensatory mechanisms for the complex networks of mitochondrial defense and quality control. Importantly, these findings can be useful for developing novel platforms for heterologous protein production, or on new biocontrol and bioremediation technologies based on Aspergillus species.

  7. In Silico Determination of Gas Permeabilities by Non-Equilibrium Molecular Dynamics: CO2 and He through PIM-1

    Directory of Open Access Journals (Sweden)

    Hendrik Frentrup

    2015-03-01

    Full Text Available We study the permeation dynamics of helium and carbon dioxide through an atomistically detailed model of a polymer of intrinsic microporosity, PIM-1, via non-equilibrium molecular dynamics (NEMD simulations. This work presents the first explicit molecular modeling of gas permeation through a high free-volume polymer sample, and it demonstrates how permeability and solubility can be obtained coherently from a single simulation. Solubilities in particular can be obtained to a very high degree of confidence and within experimental inaccuracies. Furthermore, the simulations make it possible to obtain very specific information on the diffusion dynamics of penetrant molecules and yield detailed maps of gas occupancy, which are akin to a digital tomographic scan of the polymer network. In addition to determining permeability and solubility directly from NEMD simulations, the results shed light on the permeation mechanism of the penetrant gases, suggesting that the relative openness of the microporous topology promotes the anomalous diffusion of penetrant gases, which entails a deviation from the pore hopping mechanism usually observed in gas diffusion in polymers.

  8. PIM1: A Molecular Target to Modulate Cellular Resistance to Therapy in Prostate Cancer

    Science.gov (United States)

    2008-10-31

    Hckay EP.. M al. Structural bass ot caratut.t activity and a unqja nuctaoto* andng moda ot human P"M1 k nas*. J Bol Ch*m KNMMtW- 7. 3. Uty M. Kraft A...Tagge E, Berger M, Eaves C: Diptheria toxin fused to granulocyte- macrophage colony-stimulating factor is toxic to blasts from patients with juvenile

  9. The Application of PIMS to Optimization of Production Plan in Tahe Branch Company%PIMS在塔河炼化生产计划优化中的应用

    Institute of Scientific and Technical Information of China (English)

    毛爱华

    2014-01-01

    介绍了中国石油化工股份有限公司塔河炼化有限责任公司利用PIMS软件优化炼油生产计划的情况。PIMS软件是炼油企业取得经济效益最大化的重要优化工具,PIMS软件的测算结果为优化生产计划提供了有力依据。%The application of PIMS software to optimization of refinery production plan was introduced in Tahe Branch Co., LTD., Sinopec. PIMS software is an important optimization tool in order to refinery to obtain economic benefit maximization, measuring re-sults of PIMS software to optimize the production plan provides the strong basis.

  10. Tungsten nitride coatings obtained by HiPIMS as plasma facing materials for fusion applications

    Science.gov (United States)

    Tiron, Vasile; Velicu, Ioana-Laura; Porosnicu, Corneliu; Burducea, Ion; Dinca, Paul; Malinský, Petr

    2017-09-01

    In this work, tungsten nitride coatings with nitrogen content in the range of 19-50 at% were prepared by reactive multi-pulse high power impulse magnetron sputtering as a function of the argon and nitrogen mixture and further exposed to a deuterium plasma jet. The elemental composition, morphological properties and physical structure of the samples were investigated by Rutherford backscattering spectrometry, atomic force microscopy and X-ray diffraction. Deuterium implantation was performed using a deuterium plasma jet and its retention in nitrogen containing tungsten films was investigated using thermal desorption spectrometry. Deuterium retention and release behaviour strongly depend on the nitrogen content in the coatings and the films microstructure. All nitride coatings have a polycrystalline structure and retain a lower deuterium level than the pure tungsten sample. Nitrogen content in the films acts as a diffusion barrier for deuterium and leads to a higher desorption temperature, therefore to a higher binding energy.

  11. Effect of porcine reproductive and respiratory syndrome virus (PRRSV) (isolate ATCC VR-2385) infection on bactericidal activity of porcine pulmonary intravascular macrophages (PIMs): in vitro comparisons with pulmonary alveolar macrophages (PAMs).

    Science.gov (United States)

    Thanawongnuwech, R; Thacker, E L; Halbur, P G

    1997-11-01

    Porcine pulmonary intravascular macrophages (PIMs) were recovered by in situ pulmonary vascular perfusion with 0.025% collagenase in saline from six 8-week old, crossbred pigs. Pulmonary alveolar macrophages (PAMs) were recovered by bronchoalveolar lavage from the same pigs for comparisons in each assay. The macrophages were exposed to PRRSV (ATCC VR-2385) in vitro for 24 h and infection was confirmed by an indirect immunofluorescence test or transmission electron microscopy. Viral particles tended to accumulate in the vesicles of the Golgi apparatus or endoplasmic reticulum. Bactericidal function assays were performed on the recovered macrophages to determine the effects of the virus on macrophage functions. In vitro PRRSV infection reduced the bactericidal ability of PIMs from 68.3% to 56.4% (P PAMs from 69.3% to 61.0% (P > 0.1) at 24 h post-infection. The mean percentage of bacteria killed by macrophages after PRRSV infection was not significantly different among the treatment groups or between the treatment groups and non-infected controls based on colorimetric MTT bactericidal (Staphylococcus aureus) assay. PRRSV did not affect the ability of PIMs or PAMs to internalize opsonized 125I-iododeoxyuridine-labeled S. aureus (P > 0.05). PRRSV infection significantly decreased the production of superoxide anion (P PAMs. PRRSV reduced the myeloperoxidase-H2O2-halide product (P PAMs. The results suggest: (1) PIMs should be considered as an important replication site of PRRSV; (2) PRRSV may have a detrimental effect on both PIMs and PAMs; (3) loss of bactericidal function in PIMs may facilitate hematogenous bacterial infections.

  12. Mapping of the Pim-1 oncogene in mouse t-haplotypes and its use to define the relative map positions of the tcl loci t0(t6) and tw12 and the marker tf (tufted).

    Science.gov (United States)

    Ark, B; Gummere, G; Bennett, D; Artzt, K

    1991-06-01

    Pim-1 is an oncogene activated in mouse T-cell lymphomas induced by Moloney and AKR mink cell focus (MCF) viruses. Pim-1 was previously mapped to chromosome 17 by somatic cell hybrids, and subsequently to the region between the hemoglobin alpha-chain pseudogene 4 (Hba-4ps) and the alpha-crystalline gene (Crya-1) by Southern blot analysis of DNA obtained from panels of recombinant inbred strains. We have now mapped Pim-1 more accurately in t-haplotypes by analysis of recombinant t-chromosomes. The recombinants were derived from Tts6tf/t12 parents backcrossed to + tf/ + tf, and scored for recombination between the loci of T and tf. For simplicity all t-complex lethal genes properly named tcl-tx are shortened to tx. The Pim-1 gene was localized 0.6 cM proximal to the tw12 lethal gene, thus placing the Pim-1 gene 5.2 cM distal to the H-2 region in t-haplotypes. Once mapped, the Pim-1 gene was used as a marker for further genetic analysis of t-haplotypes. tw12 is so close to tf that even with a large number of recombinants it was not possible to determine whether it is proximal or distal to tf. Southern blot analysis of DNA from T-tf recombinants with a separation of tw12 and tf indicated that tw12 is proximal to tf. The mapping of two allelic t-lethals, t0 and t6 with respect to tw12 and tf has also been a problem.(ABSTRACT TRUNCATED AT 250 WORDS)

  13. Laboratory information management system for membrane protein structure initiative--from gene to crystal.

    Science.gov (United States)

    Troshin, Petr V; Morris, Chris; Prince, Stephen M; Papiz, Miroslav Z

    2008-12-01

    Membrane Protein Structure Initiative (MPSI) exploits laboratory competencies to work collaboratively and distribute work among the different sites. This is possible as protein structure determination requires a series of steps, starting with target selection, through cloning, expression, purification, crystallization and finally structure determination. Distributed sites create a unique set of challenges for integrating and passing on information on the progress of targets. This role is played by the Protein Information Management System (PIMS), which is a laboratory information management system (LIMS), serving as a hub for MPSI, allowing collaborative structural proteomics to be carried out in a distributed fashion. It holds key information on the progress of cloning, expression, purification and crystallization of proteins. PIMS is employed to track the status of protein targets and to manage constructs, primers, experiments, protocols, sample locations and their detailed histories: thus playing a key role in MPSI data exchange. It also serves as the centre of a federation of interoperable information resources such as local laboratory information systems and international archival resources, like PDB or NCBI. During the challenging task of PIMS integration, within the MPSI, we discovered a number of prerequisites for successful PIMS integration. In this article we share our experiences and provide invaluable insights into the process of LIMS adaptation. This information should be of interest to partners who are thinking about using LIMS as a data centre for their collaborative efforts.

  14. What can we learn about HiPIMS process from the multidimensional plasma modeling?

    Science.gov (United States)

    Minea, Tiberiu

    2016-09-01

    The modeling of PVD process and especially magnetron plasma is widely reported. The novel way to excite the plasma applying to the cathode very high power pulses brings the temporal dimension to the system together with new phenomena. From the kinetic model of the dense plasma region, so called Ionization Region - IR, one can quantify the global behavior of the plasma parameters during the pulse. The most significant are the plasma composition, especially in the case of reactive gases, the fraction of back-attracted sputtered ions, the rarefaction due to wind effect, but also the discharge heating mechanisms and contribution to the discharge current. From the 2D particle modeling of the plasma new insights are revealed concerning the shape of the dense plasma region, the time evolution of the sheath, the electron energy distribution function, but also the characteristics of the diffusion plasma facing the substrate. Adding the third dimension to the model, the results reveal the complex transport of electrons especially in the azimuthal direction (instabilities and drifts), the formation of spokes and flares, and the strong relation between the secondary emission of electrons from the target and the plasma structuring. Warm thanks to Peter Awakowicz and Ante Hecimovic for inviting me to this GEC edition.

  15. STUDY OF PRIOR PREPAREDNESS AND AWARENESS REGARDING THE MBBS COURSE AMONGST FIRST YEAR STUDENTS ADMITTED AT RURAL MEDICAL COLLEGE, OF PIMS-DU, LONI

    Directory of Open Access Journals (Sweden)

    Padmanabhan P, Kunkulol R, Jangle SN

    2015-04-01

    Full Text Available Background: Adolescents in India choose career in medicine under the influence and pressure from parents, family members, peers and external sources. There are no measures taken to study whether these medical students understand the demands and priorities of a career in medicine once they decide to choose it. Hence the study was undertaken at PIMS-DU with Ist year MBBS students as participants. Aims: 1 Assess the factors influencing the choice of MBBS. 2 Analyze the prior knowledge and awareness of medical students regarding the course. 3 Their career trend in future. Material and Methods: All newly admitted students present at the orientation programme in September 2014 at PIMS –DU were included as participants. Their written responses to a 14 point questionnaire were entered into a Microsoft Excel Spreadsheet and descriptive analysis was done. Results: A majority of students had their parents and family members in medical profession indicating prior idea amongst the students regarding the course, even when the choice was made at an early stage of academics or without appearing for aptitude tests due to unawareness. Appearance for entrance exams to kept their options wide open but caused unnecessary stress, anxiety and economic burden to parents. However, these participants had limited knowledge about medical curriculum but had decisive ideas regarding future trend in career. Conclusions: Family being strong motivator for career choice for medical students; should encourage students to undertake aptitude tests, career guidance courses and investigate about future prospects to create a strong foundation as MBBS students.

  16. Time-resolved multi-mass ion imaging: Femtosecond UV-VUV pump-probe spectroscopy with the PImMS camera

    Science.gov (United States)

    Forbes, Ruaridh; Makhija, Varun; Veyrinas, Kévin; Stolow, Albert; Lee, Jason W. L.; Burt, Michael; Brouard, Mark; Vallance, Claire; Wilkinson, Iain; Lausten, Rune; Hockett, Paul

    2017-07-01

    The Pixel-Imaging Mass Spectrometry (PImMS) camera allows for 3D charged particle imaging measurements, in which the particle time-of-flight is recorded along with (x, y) position. Coupling the PImMS camera to an ultrafast pump-probe velocity-map imaging spectroscopy apparatus therefore provides a route to time-resolved multi-mass ion imaging, with both high count rates and large dynamic range, thus allowing for rapid measurements of complex photofragmentation dynamics. Furthermore, the use of vacuum ultraviolet wavelengths for the probe pulse allows for an enhanced observation window for the study of excited state molecular dynamics in small polyatomic molecules having relatively high ionization potentials. Herein, preliminary time-resolved multi-mass imaging results from C2F3I photolysis are presented. The experiments utilized femtosecond VUV and UV (160.8 nm and 267 nm) pump and probe laser pulses in order to demonstrate and explore this new time-resolved experimental ion imaging configuration. The data indicate the depth and power of this measurement modality, with a range of photofragments readily observed, and many indications of complex underlying wavepacket dynamics on the excited state(s) prepared.

  17. Thermal Shock and Oxidation Behavior of HiPIMS TiAlN Coatings Grown on Ti-48Al-2Cr-2Nb Intermetallic Alloy

    Directory of Open Access Journals (Sweden)

    Claudio Badini

    2016-11-01

    Full Text Available A High Power Impulse Magnetron Sputtering (HiPIMS method for depositing TiAlN environmental barrier coatings on the surface of Ti-48Al-2Cr-2Nb alloy was developed in view of their exploitation in turbine engines. Three differently engineered TiAlN films were processed and their performance compared. Bare intermetallic alloy coupons and coated specimens were submitted to thermal cycling under oxidizing atmosphere up to 850 °C or 950 °C, at high heating and cooling rates. For this purpose, a burner rig able to simulate the operating conditions of the different stages of turbine engines was used. Microstructures of the samples were compared before and after each test using several techniques (microscopy, XRD, and XPS. Coating-intermetallic substrate adhesion and tribological properties were investigated too. All the TiAlN films provided a remarkable increase in oxidation resistance. Good adhesion properties were observed even after repeated thermal shocks. HiPIMS pretreatments of the substrate surfaces performed before the coating deposition significantly affected the oxidation rate, the oxide layer composition and the coating/substrate adhesion.

  18. Design and Construction of the Linac4 Accelerating Structures

    CERN Document Server

    Gerigk, F; Dallocchio, A; Favre, G; Vretenar, M; Wegner, R; Tirado, P Ugena; Rossi, C; Riffaud, B; Ramberger, S; Polini, M; Gentini, L; Geisser, JM; Giguet, JM; Mathot, S; Naumenko, M; Kendjebulatov, E; Tribendis, A; Kryuchkov, Ya

    2013-01-01

    The Linac4 project at CERN is at an advanced state of construction. Prototypes and/or operational modules of the different types of accelerating structures (RFQ, buncher, DTL, CCDTL, and PIMS) have been built and are presently tested. This paper gives the status of the cavity production and reviews the RF and mechanical design of the various structure types. Furthermore the production experience and the first test results shall be presented.

  19. Full power to the first Linac4 module

    CERN Multimedia

    Francesco Poppi

    2010-01-01

    Since last week the first of a total of 23 accelerating structures for Linac4 has been undergoing high-power tests. Although still a prototype, this structure is destined to be the first of the 12 PIMS cavities to be installed in the Linac4 tunnel and it has been completely designed, developed and constructed at CERN.   The PIMS prototype. The new Linac4 has 4 different types of accelerating structures. The PI-Mode Structures (PIMS) are the last stage and are designed to accelerate protons up to 160 MeV. “PIMS have never before been used to accelerate protons”, explains Frank Gerigk, the project engineer responsible for the Linac4 accelerating structures. “In LEP, they were used to accelerate electrons, and now we have modified them and improved several design features to make them suitable for protons”. The first prototype was entirely manufactured in the CERN workshop. Due to the size of the pieces it was difficult to achieve and preserve the required to...

  20. Paladin Integrated Management (PIM)

    Science.gov (United States)

    2015-12-01

    Defense Acquisition Program MILCON - Military Construction N/A - Not Applicable O&M - Operations and Maintenance ORD - Operational Requirements Document...to make significant changes to their Lean Manufacturing Process. These changes would increase cost to meet programmatic compliance requirements and

  1. Paladin Integrated Management (PIM)

    Science.gov (United States)

    2013-12-01

    DAMIR - Defense Acquisition Management Information Retrieval Dev Est - Development Estimate DoD - Department of Defense DSN - Defense Switched Network...contractor support to Production Qualification Testing, Initial Operational Test and Evaluation ( IOT &E) and the Logistics Demonstration. In the FY 2015 PB...LRIP testing and the planned Logistics Demonstration. This reduced contractor support increases schedule risk for IOT &E and First Unit Equipped

  2. Object Constraint Language and its Application in Modeling PIM Accurately%对象约束语言及其在精化PIM中的应用

    Institute of Scientific and Technical Information of China (English)

    邱芬; 杜浩

    2006-01-01

    为了应用精确、完备的PIM自动进行模型转换、校验及编译,分析了OCL元模型与UML元模型间的关系,在此基础上对OCL在精确化平台无关模型(PIM)方面的应用进行了研究,指出OCL面临的挑战,并对OCL的研究方向提出了几点建议.对象约束语言OCL可以对模型中的元素进行约束和查询,可以在MOF的任意一层上定义模型语言,还可以通过各种方法定义模型的转换规则.

  3. The Analysis of ATM Switches with Multiple Input Queues Models and PIM Algorithm%ATM交换机多输入队列模型与PIM算法分析

    Institute of Scientific and Technical Information of China (English)

    鄂大伟

    2000-01-01

    介绍了ATM的交换结构与几种输入队列模型,提出了在多输入队列的无阻塞的交换结构中采用PIM(parallel iterative matching)算法,减少FIFO HOL阻塞,并对基于PIM时序的交换模型及其性能作了简要分析.

  4. Short-term carcinogenicity testing of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) and 2-amino-3-methylimidazo[4,5-f] quinoline (IQ) in E mu-pim-1 transgenic mice

    DEFF Research Database (Denmark)

    Sørensen, Ilona Kryspin; Mortensen, Alicja; Kristiansen, E.

    1996-01-01

    ]pyridine (PhIP) for 7 months or with 0.03% 2-amino-3-methylimidazo[4,5-f]quinoline (IQ) for 6 months, PhIP and IQ are heterocyclic amines formed during cooking of meat and fish and are mutagenic to bacteria and cultured mammalian cells, PhIP is a potent mouse lymphomagen, while IQ is a liver carcinogen...... and also causes lung tumors and tumors of the forestomach in mice. We found that transgenic E mu-pim-1 mice are highly susceptible to PhIP induced lymphomagenesis but do not respond to the IQ treatment, PhIP feeding of E mu-pim-1 mice not only increased the total number of T-cell lymphomas but also...... to non-transgenic mice. Our results suggest that the transgenic E mu-pim-1 mouse may be a useful model for short-term carcinogenicity screening of potential genotoxic carcinogens having the lymphoid system as target tissue, The carcinogen IQ which does not have the lymphoid system as a target...

  5. Aumento da produtividade: utilizando a metodologia Six Sigma e Lógica Fuzzy, um estudo de caso em uma empresa do Pólo Industrial de Manaus – PIM

    OpenAIRE

    FERREIRA, Marcela Seixas

    2011-01-01

    Este trabalho utiliza a metodologia six sigma com o objetivo de aumentar a produtividade da Linha de LCD (Liquid Crystal Display) em uma fábrica do Pólo Industrial de Manaus - PIM e um sistema de inferência fuzzy para mensurar o aumento dessa produtividade, onde foram identificados vários parâmetros baseados na metodologia six sigma. Dentre os quais, conforme grau de relevância dos especialistas deste estudo, pode-se destacar: desperdícios, capacidade produtiva e estudo de tempos. Ressaltando...

  6. Stoichiometric silicon oxynitride thin films reactively sputtered in Ar/N2O plasmas by HiPIMS

    Science.gov (United States)

    Hänninen, Tuomas; Schmidt, Susann; Wissting, Jonas; Jensen, Jens; Hultman, Lars; Högberg, Hans

    2016-04-01

    Silicon oxynitride (SiO x N y , x=0.2-1.3, y=0.2 -0.7) thin films were synthesized by reactive high power impulse magnetron sputtering from a pure silicon target in Ar/N2O atmospheres. It was found that the composition of the material can be controlled by the reactive gas flow and the average target power. X-ray photoelectron spectroscopy (XPS) shows that high average powers result in more silicon-rich films, while lower target powers yield silicon-oxide-like material due to more pronounced target poisoning. The amount of nitrogen in the films can be controlled by the percentage of nitrous oxide in the working gas. The nitrogen content remains at a constant level while the target is operated in the transition region between metallic and poisoned target surface conditions. The extent of target poisoning is gauged by the changes in peak target current under the different deposition conditions. XPS also shows that varying concentrations and ratios of oxygen and nitrogen in the films result in film chemical bonding structures ranging from silicon-rich to stoichiometric silicon oxynitrides having no observable Si-Si bond contributions. Spectroscopic ellipsometry shows that the film optical properties depend on the amount and ratio of oxygen and nitrogen in the compound, with film refractive indices measured at 633 nm ranging between those of SiO2 and Si3N4.

  7. A METHOD OF TRANSFORMING PIM TO J2EE PLATFORM PSM BASED ON MDA%基于MDA的PIM到J2EE平台PSM的转换方法

    Institute of Scientific and Technical Information of China (English)

    崔萌; 史耀馨; 李宣东; 郑国梁

    2005-01-01

    MDA是解决基于不同中间件系统的集成问题.它将不同的系统都结构化成PIM和PSM并针对不同实现技术与平台制订多个映射规则,然后通过这些映射规则及辅助工具将PIM转换成PSM,再将PSM不断求精直至形成最后代码.MDA中的模型转换有4种:PIM到PIM,PIM到PSM,PSM到PSM以及PSM到PIM.其中的PIM到PSM转换是难点.本文提出了一种PIM到J2EE平台的PSM转换的方法:首先将一个用PIM配置图和类图描述的系统根据映射规则转换成J2EE平台下的PSM配置图、类图;然后根据精化规则对PSM模型进一步精化,生成不同的EJB以及构件图,为最后代码的自动生成打下基础.

  8. The Jak2V617F oncogene associated with myeloproliferative diseases requires a functional FERM domain for transformation and for expression of the Myc and Pim proto-oncogenes.

    Science.gov (United States)

    Wernig, Gerlinde; Gonneville, Jeffrey R; Crowley, Brian J; Rodrigues, Margret S; Reddy, Mamatha M; Hudon, Heidi E; Walz, Christoph; Reiter, Andreas; Podar, Klaus; Royer, Yohan; Constantinescu, Stefan N; Tomasson, Michael H; Griffin, James D; Gilliland, D Gary; Sattler, Martin

    2008-04-01

    The V617F activating point mutation in Jak2 is associated with a proportion of myeloproliferative disorders. In normal hematopoietic cells, Jak2 signals only when associated with a growth factor receptor, such as the erythropoietin receptor (EpoR). We sought to identify the molecular requirements for activation of Jak2V617F by introducing a point mutation in the FERM domain (Y114A), required for receptor binding. Whereas BaF3.EpoR cells are readily transformed by Jak2V617F to Epo independence, we found that the addition of the FERM domain mutation blocked transformation and the induction of reactive oxygen species. Further, while cells expressing Jak2V617F had constitutive activation of STAT5, cells expressing Jak2V617F/Y114A did not, suggesting that signaling is defective at a very proximal level. In addition, expression of the Myc and Pim proto-oncogenes by Jak2V617F was found to be FERM domain dependent. An inducible constitutively active STAT5 mutant expressed in BaF3 cells was sufficient to induce Myc and Pim. Finally, the FERM domain in Jak2V617F was also required for abnormal hematopoiesis in transduced primary murine fetal liver cells. Overall, our results suggest that constitutive activation of Jak2 requires an intact FERM domain for a transforming phenotype, and is necessary for activation of the major target of Jak2, STAT5.

  9. Epimenide e l’epos argonautico Epimenides and the Argonautica epic Épiménide et l'épopée argonautique

    Directory of Open Access Journals (Sweden)

    Antonio Martina

    2012-06-01

    Full Text Available L’articolo intende analizzare la presenza di motivi desunti dall’epos argonautico in due frammenti di Epimenide (PEG 58-59 F = FGrHist 457 FF 11-12, confrontandoli in modo particolare con le Argonautiche di Apollonio Rodio. In un caso è evidente l’affinità con l’opera di Eumelo di Corinto, nell’altro Epimenide attingeva forse a un’indipendente saga di Frisso e dei suoi figli. Il suo interessa per l’epos argonautico in generale doveva probabilmente essere dovuto anche all’intersezione tra esso e l’isola di Creta.Le présent article entend analyser la présence de motifs issus de l’épopée argonautique dans deux fragments d’Epiménide (PEG 58-59 F = FGrHist 457 FF 11-12, en les comparant plus particulièrement avec les Argonautiques d’Apollonios de Rhodes. Dans un cas, l’affinité avec l’œuvre d’Eumélos de Corinthe est évidente, dans l���autre Épiménide a peut-être utilisé une version indépendante de l’histoire de Phrixos et de ses fils. Son intérêt pour l’épopée argonautique était probablement dû à une interconnexion de celle-ci avec l’île de Crète.This article seeks to analyse the presence of motifs from the Argonautica epic in two fragments of Epimenides (PEG58-58 F = FGrHist457 FF 11-12, comparing them especially with the Argonauticaof Apollonius of Rhodes. In one case the affinity with the work of Eumelus of Corinth is obvious, in the other Epimenides may have used an independent saga on Phrixus and his sons. His interest in the Argonautica epic in general was probably due to the intersection of this epic narrative with the Island of Crete.

  10. Argon metastables in HiPIMS: validation of the ionization region model by direct comparison to time resolved tunable diode-laser diagnostics

    Science.gov (United States)

    Stancu, G. D.; Brenning, N.; Vitelaru, C.; Lundin, D.; Minea, T.

    2015-08-01

    The volume plasma interactions of high power impulse magnetron sputtering (HiPIMS) discharges operated with a Ti target is analyzed in detail by combining time-resolved diagnostics with modeling of plasma kinetics. The model employed is the ionization region model (IRM) with an improved and detailed treatment of the kinetics of the argon metastable (Arm) state, called m-IRM. The diagnostics used is tunable diode-laser absorption spectroscopy (TD-LAS) of the Arm state, which gives the line-of-sight density integrated along the laser path parallel to the target surface. The TD-LAS recordings exhibit quite complex temporal evolutions Arm(t), with distinct features that are shown to reflect the time evolution of the plasma (the electron density and temperature), and of the argon gas (gas rarefaction and refill). The Arm(t) function is thus a tracer for the most important aspects of internal discharge physics, and therefore suitable for model testing and validation. The IRM model is constructed to be locked to obey specific experimental macroscopic discharge parameters, specifically the discharge current ID(t) and the voltage UD(t). It has to this purpose been run with the appropriate process gas pressures (from 0.67 to 2.67 Pa), with the experimentally applied voltage pulse profiles UD(t), and with the resulting current pulse profiles ID(t) (with maxima from 0.5 to 70 A). It is shown that the model reproduces the features in the TD-LAS measurements: both the Arm(t) evolution in single pulses, and how the pulse shapes change with gas pressure and with pulse amplitude. The good agreement between the measurements and model output is in this work taken to validate the basic assumptions of the m-IRM. In addition, the m-IRM results have been used to unravel the connections between volume plasma kinetics and various features recorded in the TD-LAS measurement, and to generalize the foremost characteristics of the studied discharges.

  11. Structural basis for selective recognition of acyl chains by the membrane-associated acyltransferase PatA.

    Science.gov (United States)

    Albesa-Jové, David; Svetlíková, Zuzana; Tersa, Montse; Sancho-Vaello, Enea; Carreras-González, Ana; Bonnet, Pascal; Arrasate, Pedro; Eguskiza, Ander; Angala, Shiva K; Cifuente, Javier O; Korduláková, Jana; Jackson, Mary; Mikušová, Katarína; Guerin, Marcelo E

    2016-03-11

    The biosynthesis of phospholipids and glycolipids are critical pathways for virtually all cell membranes. PatA is an essential membrane associated acyltransferase involved in the biosynthesis of mycobacterial phosphatidyl-myo-inositol mannosides (PIMs). The enzyme transfers a palmitoyl moiety from palmitoyl-CoA to the 6-position of the mannose ring linked to 2-position of inositol in PIM1/PIM2. We report here the crystal structures of PatA from Mycobacterium smegmatis in the presence of its naturally occurring acyl donor palmitate and a nonhydrolyzable palmitoyl-CoA analog. The structures reveal an α/β architecture, with the acyl chain deeply buried into a hydrophobic pocket that runs perpendicular to a long groove where the active site is located. Enzyme catalysis is mediated by an unprecedented charge relay system, which markedly diverges from the canonical HX4D motif. Our studies establish the mechanistic basis of substrate/membrane recognition and catalysis for an important family of acyltransferases, providing exciting possibilities for inhibitor design.

  12. A Compact, Pi-Mode Extraction Scheme for the Axial B-Field Recirculating Planar Magnetron

    Science.gov (United States)

    2012-07-23

    Figure 4). Thus, in a planar magnetron, the minimum phase velocity, vph , to stay above cutoff in the rectangular waveguide is ℎ = ...as magnetrons, electrons must be accelerated such that they are in synchronism with the phase velocity, vph , of the electromagnetic wave for an...is also likely to be a factor in the waveguide power-loading profile data displayed in Figure 10 (a). It is expected that a careful optimization of

  13. LINAC4 takes a tour of Europe

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    Along the German Autobahnen, a truck carrying 20 tonnes of copper is on its way to Poland. The metal has already made a short tour of Europe, yet the drive across the high-speed highway is only the beginning of its transformation into CERN’s next linear accelerator, LINAC4.   Grzegorz Wrochna (left), director of the Andrzej Soltan Institute for Nuclear Studies (IPJ), and Rolf Heuer (right), CERN DG, sign the framework agreement between the two institutes. By the summer of 2012, the PI-Mode Structures (PIMS) will be constructed and completely installed in the LINAC4 tunnel. The PIMS cavities are the final accelerating structures needed for LINAC4, and have been designed to accelerate protons from 100 to 160MeV. While the first cavity was built entirely at CERN, construction of the remaining cavities has become a larger, multi-national operation. In a 1 million euro framework agreement signed on 11 February by the Director-General, the Andrzej Soltan Institute for Nuclear Studies in Swie...

  14. RF ACCELERATING STRUCTURE FOR THE MUON COOLING EXPERIMENT.

    Energy Technology Data Exchange (ETDEWEB)

    CORLETT,J.; GREEN,M.; LI,D.; HOLTKAMP,N.; MORETTI,A.; KIRK,H.G.; PALMER,R.B.; ZHAO,Y.; SUMMERS,D.

    1999-03-29

    The ionization cooling of muons requires longitudinal acceleration of the muons after scattering in a hydrogen target. In order to maximize the accelerating voltage, we propose using linear accelerating structures with cells bounded by thin beryllium metal foils. This produces an on-axis field equivalent to the maximum surface field, whereas with beam-pipes the accelerating field is approximately half that of the peak surface field in the cavity. The muons interact only weakly with the thin foils. A {pi}/2 interleaved cavity structure has been chosen, with alternate cells coupled together externally, and the two groups of cells fed in quadrature. At present they are considering an operating temperature of 77K to gain a factor of at least two in Q-value over room temperature. The authors describe the design of the {pi}/2 interleaved cavity structure, design of an alternative {pi}-mode open structure, preliminary experimental results from a low-power test cavity, and plans for high-power testing.

  15. Photo-physics study of an hydroxy-quinoline derivative as inhibitor of Pim-1 kinase: ultraviolet-visible linear dichroism spectroscopy and quantum chemical calculations.

    Science.gov (United States)

    Lamhasni, T; Ait Lyazidi, S; Hnach, M; Haddad, M; Desmaële, D; Spanget-Larsen, J; Nguyen, D D; Ducasse, L

    2013-09-01

    The photophysical properties of the antiviral 7-nicotinoyl-styrylquinoline (MB96) were investigated by means of UV-Vis linear dichroism (LD) spectroscopy on molecular samples aligned in stretched polyvinylalcohol (PVA), supported by time dependent density functional theory (TD-DFT) calculations. Experimentally, the directions of the transitions moments with respect to the long axis of the molecule were deduced from the orientation K factors, determined by means of "trial-and-error" procedure. The absorption spectrum presents two parts. The main transition in the lowest energy part, observed around 365 nm and showing the highest K value 0.8, is longitudinally in-plane polarized. The highest energy part which is extended between 230 and 320 nm, large, diffuse, and of weak intensity, shows estimated K values between 0.2 and 0.5. This complex structure is transversally polarized with some contamination by the longitudinal character of the first strong band. The TD-DFT results agree fairly well with the LD measurements.

  16. Application of VUV-PIMS coupled with GC-MS in chemical characterization, identification and comparative analysis of organic components in both vehicular-derived SOA and haze particles

    Science.gov (United States)

    Zhang, Peng; Ma, Pengkun; Zhang, Haixu; Shu, Jinian; Yang, Bo; Li, Zhen

    2017-09-01

    Gasoline vehicle exhaust is a significant source of volatile organic compounds (VOCs) in megacities. In this study, chemical characterization of secondary aerosol particles from the oxidation of gasoline vehicular exhaust by O3, OH, and NO3 radicals and the airborne aerosol particles collected during a heavy haze episode (23-25 December 2015) in Beijing were elaborately investigated. The secondary organic aerosols (SOAs) collected from the exhaust and airborne aerosol particles were characterized with a newly built vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) after thermal desorption, and identified by gas chromatography mass spectrometry (GC-MS). The obtained photoionization mass spectra revealed that the SOAs from the oxidation of gasoline vehicular exhaust and airborne aerosol particles possess a series of common characteristic mass peaks at m/z 98, 112, 126, and 140. The components at m/z 98, 112, 126, 140 were further identified to be carbonyl species after PFBHA derivatization followed by GC-MS analyses. The carbonyl species from exhaust SOAs were found to be responsible for 51.7%, 57.5%, 36.3%, and 27.9% of the chemical components in haze particles at m/z 98, 112, 126, and 140, respectively, which indicates that these SOA components from the oxidation of gasoline vehicular exhaust are a major factor that affects the air quality in Beijing. Among the exhaust SOAs, the carbonyl species detected simultaneously in two (P(O3/OH)) or three kinds of exhaust oxidation reactions (P(O3/NO3/OH)) make a significant contributions to these carbonyl species in haze particles (10.6% for m/z 98, 18.3% for m/z 112, 23.4% for m/z 126, and 20.5% for m/z 140). These results implies that the unsaturated VOCs (i.e. alkenes) from exhaust may be one kind of important SOA precursor and that their chemical degradation in the atmosphere may have an important impact on urban air quality in heavy polluted cities such as Beijing, especially during severe winter haze

  17. A portable magnetic induction measurement system (PIMS).

    Science.gov (United States)

    Cordes, Axel; Foussier, Jérôme; Pollig, Daniel; Leonhardt, Steffen

    2012-02-22

    For contactless monitoring of ventilation and heart activity, magnetic induction measurements are applicable. As the technique is harmless for the human body, it is well suited for long-term monitoring solutions, e.g., bedside monitoring, monitoring of home care patients, and the monitoring of persons in critical occupations. For such settings, a two-channel portable magnetic induction system has been developed, which is small and light enough to be fitted in a chair or bed. Because demodulation, control, and filtering are implemented on a front-end digital signal processor, a PC is not required (except for visualization/data storage during research and development). The system can be connected to a local area network (LAN) or wireless network (WiFi), allowing to connect several devices to a large monitoring system, e.g., for a residential home for the elderly or a hospital with low-risk patients not requiring standard ECG monitoring. To visualize data streams, a Qt-based (Qt-framework by Nokia, Espoo, Finland) monitoring application has been developed, which runs on Netbook computers, laptops, or standard PCs. To induce and measure the magnetic fields, external coils and amplifiers are required. This article describes the system and presents results for monitoring respiration and heart activity in a (divan) bed and for respiration monitoring in a chair. Planar configurations and orthogonal coil setups were examined during the measurement procedures. The measurement data were streamed over a LAN to a monitoring PC running Matlab (The MathWorks Inc, Natick, MA, USA).

  18. The LINAC4 Power Coupler

    CERN Document Server

    Gerigk, F; Montesinos, E; Riffaud, B; Ugena Tirado, P; Wegner, R

    2011-01-01

    Linac4 is employing three types of accelerating structures after the RFQ: a Drift Tube Linac (DTL), a Cell- Coupled DTL (CCDTL), and a Pi-Mode Structure (PIMS) to accelerate the beam up to 160 MeV at 352.2MHz. The structures are designed for a peak power of approximately 1 MW per power coupler, which is transported via rectangular waveguides from the klystron gallery to the RF cavities. The coupler itself consists of two parts: a ceramic window, which separates the cavity vacuum from the air in the waveguides, and a Tuner-adjustablewaveguide Coupler (TaCo), which couples the RF power through an iris to the cavity. In the frame of the Linac4 R&D both devices have been significantly improvedwith respect to their commonly used design. On the coupler side, the waveguide short circuit with its matched length has been replaced by a fixedlength /4 short circuit. The RF matching is done by a simple piston tuner, which allows a quick matching to different cavity quality factors. In the window part, which usually c...

  19. The LINAC4 Project at CERN

    CERN Document Server

    Arnaudon, L; Bertone, C; Body, Y; Broere, J; Brunner, O; Buzio, M; Carli, C; Caspers, F; Corso, JP; Coupard, J; Dallocchio, A; Dos Santos, N; Garoby, R; Gerigk, F; Hammouti, L; Hanke, K; Jones, M; Kozsar, I; Lettry, J; Lallement, JB; Lombardi, A; Lopez-Hernandez, LA; Maglioni, C; Mathot, S; Maury, S; Mikulec, B; Nisbet, D; Noels, C; Paoluzzi, M; Puccio, B; Raich, U; Ramberger, S; Rossi, C; Schwerg, N; Scrivens, R; Vandoni, G; Weisz, S; Vollaire, J; Vretenar, M; Zickler, T

    2011-01-01

    As the first step of a long-term programme aiming at an increase in the LHC luminosity, CERN is building a new 160 MeV H¯ linear accelerator, Linac4, to replace the ageing 50 MeV Linac2 as injector to the PS Booster (PSB). Linac4 is an 86-m long normal-conducting linac made of an H¯ source, a Radio Frequency Quadrupole (RFQ), a chopping line and a sequence of three accelerating structures: a Drift-Tube Linac (DTL), a Cell-Coupled DTL (CCDTL) and a Pi-Mode Structure (PIMS). The civil engineering has been recently completed, and construction of the main accelerator components has started with the support of a network of international collaborations. The low-energy section up to 3 MeV including a 3-m long 352 MHz RFQ entirely built at CERN is in the final construction phase and is being installed on a dedicated test stand. The present schedule foresees beam commissioning of the accelerator in the new tunnel in 2013/14; the moment of connection of the new linac to the CERN accelerator chain will depend on the L...

  20. Synthesis and biological activities of pyrazolo[3,4-g]quinoxaline derivatives.

    Science.gov (United States)

    Gavara, Laurent; Saugues, Emmanuelle; Alves, Georges; Debiton, Eric; Anizon, Fabrice; Moreau, Pascale

    2010-11-01

    The synthesis of new pyrazolo[3,4-g]quinoxaline derivatives, as well as their Pim kinases (Pim-1, Pim-2, Pim-3) inhibitory potencies and in vitro antiproliferative activities toward a human fibroblast primary culture and three human solid cancer cell lines (PA1, PC3 and DU145) are described. The results obtained in this preliminary structure-activity relationship study have pointed out that most of the compounds in this series exhibited interesting in vitro Pim-3 kinase inhibitory potencies. Moreover, some of the tested compounds have demonstrated favorable antiproliferative potencies.

  1. Lipoarabinomannan, and its related glycolipids, induce divergent and opposing immune responses to Mycobacterium tuberculosis depending on structural diversity and experimental variations.

    Science.gov (United States)

    Källenius, Gunilla; Correia-Neves, Margarida; Buteme, Helen; Hamasur, Beston; Svenson, Stefan B

    2016-01-01

    Exposure to Mycobacterium tuberculosis (Mtb) may lead to active or latent tuberculosis, or clearance of Mtb, depending essentially on the quality of the host's immune response. This response is initiated through the interaction of Mtb cell wall surface components, mostly glycolipids, with cells of the innate immune system, particularly macrophages (Mφs) and dendritic cells (DCs). The way Mφs and DC alter their cytokine secretome, activate or inhibit different microbicidal mechanisms and present antigens and consequently trigger the T cell-mediated immune response impacts the host immune response against Mtb. Lipoarabinomannan (LAM) is one of the major cell wall components of Mtb. Mannosyl-capped LAM (ManLAM), and its related cell wall-associated types of glycolipids/lipoglycans, namely phosphatidylinositol mannosides (PIMs) and lipomannan (LM), exhibit important and distinct immunomodulatory properties. The structure, internal heterogeneity and abundance of these molecules vary between Mtb strains exhibiting distinct degrees of virulence. Thus ManLAM, LM and PIMs may be considered crucial Mtb-associated virulence factors in the pathogenesis of tuberculosis. Of particular relevance for this review, there is controversy about the specific immunomodulatory properties of these distinct glycolipids, particularly when tested as purified molecules in vitro. In addition to the variability in the glycolipid composition conflicting reports may also result from differences in the protocols used for glycolipid isolation and for in vitro experiments including immune cell types and procedures to generate them. Understanding the immunomodulatory properties of these cell wall glycolipids, how they differ between distinct Mtb strains, and how they influence the degree of Mtb virulence, is of utmost relevance to understand how the host mounts a protective or otherwise pathologic immune response. This is essential for the design of preventive strategies against tuberculosis. Thus

  2. Influence of reactive sputtering process parameters on the structure and properties of TiO{sub 2} thin films

    Energy Technology Data Exchange (ETDEWEB)

    El-Hamshary, Azza Amin

    2011-07-11

    In this work, an atomistic understanding of the growth of TiO{sub 2} thin films under the influence of various sputtering process parameters has been developed. It has been demonstrated that tailoring the structure of the reactively sputtered TiO{sub 2} thin films is possible by controlling the sputtering process parameters. Different sputtering techniques like dcMS, IBAS and HiPIMS have been utilized to fabricate TiO{sub 2} thin films. These films exhibit two crystalline structures, namely anatase and rutile. Sample preparation has been performed at different conditions, varying e.g. energetic bombardment, oxygen partial pressure and film thickness. It has been found that the formation of each phase is governed by specific parameters. For instance, energetic bombardment promotes the growth of the rutile structure. On the other hand, the growth of the anatase phase profits from the absence or very weak ion bombardment. Additionally, the anatase phase was often found for growth at high oxygen partial pressure or for thick films, whereas a rutile structure was formed otherwise. Additional substrate heating was also found to support the formation of the anatase phase. It has been demonstrated that energetic bombardment plays a dominant role in the structure formation. It has been proven that the bombardment of the growing film with highly energetic negative oxygen ions inherent in the sputtering process promotes the growth of the rutile structure. This has been observed by an investigation of the sample profile utilizing new and aged targets, since the distribution of oxygen ion bombardment along the substrate depends on the age of the target. Further support was found from investigating films grown in a HiPIMS process, where the negative oxygen ions with high energies are the dominant species governing structure formation. Furthermore, pure rutile films have also been grown under additional ion bombardment in an ion-assisted DC sputtering process. These results also

  3. Structural engineering of a phage lysin that targets Gram-negative pathogens

    Energy Technology Data Exchange (ETDEWEB)

    Lukacik, Petra; Barnard, Travis J.; Keller, Paul W.; Chaturvedi, Kaveri S.; Seddiki, Nadir; Fairman, James W.; Noinaj, Nicholas; Kirby, Tara L.; Henderson, Jeffrey P.; Steven, Alasdair C.; Hinnebusch, B. Joseph; Buchanan, Susan K. (NIH); (WU-MED)

    2012-11-13

    Bacterial pathogens are becoming increasingly resistant to antibiotics. As an alternative therapeutic strategy, phage therapy reagents containing purified viral lysins have been developed against Gram-positive organisms but not against Gram-negative organisms due to the inability of these types of drugs to cross the bacterial outer membrane. We solved the crystal structures of a Yersinia pestis outer membrane transporter called FyuA and a bacterial toxin called pesticin that targets this transporter. FyuA is a {beta}-barrel membrane protein belonging to the family of TonB dependent transporters, whereas pesticin is a soluble protein with two domains, one that binds to FyuA and another that is structurally similar to phage T4 lysozyme. The structure of pesticin allowed us to design a phage therapy reagent comprised of the FyuA binding domain of pesticin fused to the N-terminus of T4 lysozyme. This hybrid toxin kills specific Yersinia and pathogenic E. coli strains and, importantly, can evade the pesticin immunity protein (Pim) giving it a distinct advantage over pesticin. Furthermore, because FyuA is required for virulence and is more common in pathogenic bacteria, the hybrid toxin also has the advantage of targeting primarily disease-causing bacteria rather than indiscriminately eliminating natural gut flora.

  4. PIMS:Remediation of Soil and Groundwater Contaminated With Metals

    Science.gov (United States)

    2006-06-01

    covering the amended soils with a layer of uncontaminated surface soil, and seeding with native grasses and wildflowers . Shallow lysimeter monitoring... wildflowers and grasses. Shallow lysimeter wells were installed at three positions around the site to collect leachate leaving the treatment zone...Priority Pollutants Laboratory, Inc. (APPL) in Fresno, California . This page left blank intentionally. 17 4.0 PERFORMANCE ASSESSMENT 4.1

  5. Shrinkage calibration method for μPIM manufactured parts

    DEFF Research Database (Denmark)

    Quagliotti, Danilo; Tosello, Guido; Salaga, J.

    2016-01-01

    Five green and five sintered parts of a micro mechanical component, produced by micro powder injection moulding, were measured using an optical coordinate measuring machine. The aim was to establish a method for quality assurance of the final produced parts. Initially, the so called “green” parts...... was evaluated propagating the expanded uncertainty previously stated and considering green and sintered parts correlated. Results showed that the proposed method can be effective instating tolerances if it is assumed that the variability on the dimensions induced by the shrinkage equals the propagated expanded...

  6. The effects of inspiratory muscle strengthening on MIP and quality of life of elderly nursing home patients. (Los efectos del beneficio de la fuerza del músculo inspiratorio en la PIM y la calidad de la vida de los pacientes mayores de la clínica de reposo.

    Directory of Open Access Journals (Sweden)

    Silvia Correa Bacelar

    2008-01-01

    Full Text Available AbstractThe objective of this study was to compare the effects of inspiratory muscle strengthening on maximal inspiratory pressure (MIP and on quality of life among elderly nursing home patients. The study population was divided in two groups: experimental group- EG (n=21, 76.48 2.12 years and control group- CG (n=13, 75.69 2.26 years. The World Health Organization Quality of Life Group (WHOQOL-100 questionnaire was used to evaluate the quality of life of the subjects. A Manovacuometer (analogical, with an operational interval of –150 to +150 cmH2O; Critical Med/USA-2002 was used to evaluate MIP. The study protocol consisted of a gradual increase in workload (50%-100%; the sessions lasted 20 minutes and were composed of 7 series of strengthening (2 minutes each with a 1-minute interval between the series, 3 times a week for 10 weeks. Variance analysis of multivariate repeated measurements demonstrated significant differences only for MIP between CG (32,69±17,03 cmH2O versus 23,08±10,71 cmH2O and EG (31,67±11,11 cmH2O versus 55,24±23,26 cmH2O, and the latter was higher than the former (p= 0,00000. Therefore, we concluded that inspiratory muscle strengthening led to an increase in MIP that did not improve quality of life. However, further studies should be done in this population to validate a quality of life questionnaire specific for the elderly.ResumenEl objetivo de este estudio era comparar los efectos del músculo inspiratorio que consolidaban en la presión inspiratoria máxima (PIM y en la calidad de la vida entre pacientes mayores de la clínica de reposo. Dividieron a la población del estudio en dos grupos: grupo experimental EG. (n=21,76.48 2.12 años y grupo de control CG (n=13, 75.69 2.26 años. La calidad de la Organización Mundial de la Salud del cuestionario del grupo de la vida(WHOQOL-100 fue utilizada para evaluar la calidad de la vida de los temas. Un Manovacuometer (analógico, con un intervalo operacional - de 150 a

  7. Evaluation of Coordinate Compensator Structure Based on Power Injection Model for Loading Margin Enhancement in Power Systems

    Directory of Open Access Journals (Sweden)

    Reza Sedaghati

    2013-09-01

    Full Text Available In this paper, the structure of Hybrid Power Flow Controller (HPFC is proposed in order to improve static voltage stability characteristics. HPFC forms a hybrid controller using IPFC series converters as a hybrid with existing parallel and passive compensator (SVC in power system. Utilization of hybrid structures makes it possible to use converters for improving performance of both old and existing compensators in power networks. In this study, the power injection model (PIM is used to model the hybrid power flow controller in Newton load flow. The aforementioned model is simulated in MATLAB software. The P-V curves of PQ buses of a typical system are evaluated by a continuous power flow (CPF method to analyses the effect of this controller on static voltage stability characteristics. Meanwhile, SVC as existing devices in the system and UPFC and IPFC as state-of-the-art compensator devices are compared with the proposed hybrid structure. The amount of active and reactive power loss and improvement of loading limit of the system are used as main parameters in our comparison.

  8. Structural Insight into the Interactions between Death-Associated Protein Kinase 1 and Natural Flavonoids.

    Science.gov (United States)

    Yokoyama, Takeshi; Kosaka, Yuto; Mizuguchi, Mineyuki

    2015-09-24

    Death-associated protein kinase 1 (DAPK1) is a 160 kDa serine/threonine protein kinase that belongs to the Ca(2+)/calmodulin-dependent protein kinase subfamily. DAPK1 is a possible target for the treatment of acute ischemic stroke and endometrial adenocarcinomas. In the present study, we investigated the binding characteristics of 17 natural flavonoids to DAPK1 using a 1-anilinonaphthalene-8-sulfonic acid competitive binding assay and revealed that morin was the strongest binder among the selected compounds. The crystallographic analysis of DAPK1 and 7 selected flavonoid complexes revealed the structure-binding affinity relationship in atomic-level detail. It was suggested that the high affinity of morin could be accounted for by the ionic interaction between 2'-OH and K42 and that such an interaction would not take place with either cyclin-dependent protein kinases or PIM kinases because of their broader entrance regions. Thus, morin would be a more selective inhibitor of DAPK1 than either of these other types of kinases. In addition, we found that the binding of kaempferol to DAPK1 was associated with a chloride ion. The present study provides a better understanding of the molecular properties of the ATP site of DAPK1 and may be useful for the design of specific DAPK1 inhibitors.

  9. Structural Formation and Photocatalytic Activity of Magnetron Sputtered Titania and Doped-Titania Coatings

    Directory of Open Access Journals (Sweden)

    Peter J. Kelly

    2014-10-01

    Full Text Available Titania and doped-titania coatings can be deposited by a wide range of techniques; this paper will concentrate on magnetron sputtering techniques, including “conventional” reactive co-sputtering from multiple metal targets and the recently introduced high power impulse magnetron sputtering (HiPIMS. The latter has been shown to deliver a relatively low thermal flux to the substrate, whilst still allowing the direct deposition of crystalline titania coatings and, therefore, offers the potential to deposit photocatalytically active titania coatings directly onto thermally sensitive substrates. The deposition of coatings via these techniques will be discussed, as will the characterisation of the coatings by XRD, SEM, EDX, optical spectroscopy, etc. The assessment of photocatalytic activity and photoactivity through the decomposition of an organic dye (methylene blue, the inactivation of E. coli microorganisms and the measurement of water contact angles will be described. The impact of different deposition technologies, doping and co-doping strategies on coating structure and activity will be also considered.

  10. Structure-based lead discovery for protein kinase C zeta inhibitor design by exploiting kinase-inhibitor complex crystal structure data and potential therapeutics for preterm labour.

    Science.gov (United States)

    Shao, Qing-Chun; Zhang, Cui-Juan; Li, Jie

    2014-10-14

    The protein kinase C (PKC) is a family of serine/threonine kinases with a broad range of cellular targets. Members of the PKC family participate at the diverse biological events involved in cellular proliferation, differentiation and survival. The PKC isoform zeta (PKCζ) is an atypical member that has recently been found to play an essential role in promoting human uterine contractility and thus been raised as a new target for treating preterm labour and other tocolytic diseases. In this study, an integrative protocol was described to graft hundreds of inhibitor ligands from their complex crystal structures with cognate kinases into the active pocket of PKCζ and, based on the modeled structures, to evaluate the binding strength of these inhibitors to the non-cognate PKCζ receptor by using a consensus scoring strategy. A total of 32 inhibitors with top score were compiled, and eight out of them were tested for inhibitory potency against PKCζ. Consequently, five compounds, i.e. CDK6 inhibitor fisetin, PIM1 inhibitor myricetin, CDK9 inhibitor flavopiridol and PknB inhibitor mitoxantrone as well as the promiscuous kinase inhibitor staurosporine showed high or moderate inhibitory activity on PKCζ, with IC50 values of 58 ± 9, 1.7 ± 0.4, 108 ± 17, 280 ± 47 and 0.019 ± 0.004 μM, respectively, while other three compounds, including two marketed drugs dasatinib and sunitinib as well as the Rho inhibitor fasudil, have not been detected to possess observable activity. Next, based on the modeled structure data we modified three flavonoid kinase inhibitors, i.e. fisetin, myricetin and flavopiridol, to generate a number of more potential molecular entities, two of which were found to have a moderately improved activity as compared to their parent compounds.

  11. An MDA-based approach for behaviour modelling of context-aware mobile applications

    NARCIS (Netherlands)

    Daniele, Laura M.; Ferreira Pires, Luis; Sinderen, van Marten

    2009-01-01

    Most reported MDA approaches give much attention to structural aspects in PSMs and in generated code, and less attention to the PIM level and the behaviour of the modelled applications. Consequently, application behaviour is generally not (well) defined at the PIM level. This paper presents an MDA-b

  12. Structural cladding /clad structures:

    DEFF Research Database (Denmark)

    Beim, Anne

    2013-01-01

    tendencies, which can be traced in the use of materials, the structural features and the construction details of building systems in selected architectural works. With a particular focus at heavy constructions made of solid wood and masonry, and light weight constructions made of wooden frame structures...... do we see limitations of tectonic maneuver; how does the performative logic challenge the heavy building constructions....

  13. Structural cladding /clad structures

    DEFF Research Database (Denmark)

    Beim, Anne

    2012-01-01

    of materials, the structural features and the construction details of building systems in selected architectural works. With a particular focus at heavy constructions made of solid wood and masonry, and light weight constructions made of wooden frame structures and steel profiles, it is the intention......, to ask for more restrictive building codes. As an example, in Denmark there are series of increasing demands in the current building legislations that are focused at enhancing the energy performance of buildings, which consequently foster rigid insulation standards and ask for improvement of air...... with at a global or national level. How to bring the knowledge, material evidence and cultural dimension, which exist in traditional building practices into play with present day hardcore technocratic demands in the construction industry and in building construction, seem be With point of departure...

  14. Structural cladding /clad structures

    DEFF Research Database (Denmark)

    Beim, Anne

    2012-01-01

    to analyze, compare, and discuss how these various construction solutions point out strategies for development based on fundamentally different mindsets. The research questions address the following issues: How to learn from traditional construction principles: When do we see limitations of tectonic maneuver...... in the challenges previously described this paper forms a ‘tectonic enquiry’ into contemporary building practice by looking at specific performative tendencies, which can be traced in the structural features and the construction details of selected building systems and architectural works. With a particular focus...... at heavy constructions made of solid wood and masonry, and light weight constructions made of wooden frame structures and steel profiles, it is the intention to analyze, compare, and discuss how these various construction solu-tions point out strategies for development based on fundamentally different...

  15. Distribution Structures

    NARCIS (Netherlands)

    Friedrich, H.; Tavasszy, L.A.; Davydenko, I.

    2013-01-01

    Distribution structures are important elements of the freight transportation system. Goods are routed via warehouses on their way from production to consumption. This chapter discusses drivers behind these structures, logistics decisions connected to distribution structures on the micro level, and

  16. Pore structure and carbonation in blended lime-cement pastes

    Directory of Open Access Journals (Sweden)

    Álvarez, J. I.

    2006-06-01

    Full Text Available The present study aims to gain a fuller understandingof the curing process in lime pastes (100, 90, 80, 70,60, 50 and 40% lime blended with cement by analyzingcarbonation in these materials. A hydrated, airslaked lime powder and CEM II A/L 32.5 Portlandcement were used for the blends. These materialswere singled out for research primarily because theymay be used in the restoration of heritage monuments.Variation in weight was used as an indicator for carbonation.A new parameter, A, was found to vary inverselywith the percentage of the cement because of theprevalence of Knudsen diffusion in the paste, in turndue to the characteristics of the pore structure, whichwas studied by mercury intrusion porosimetry (MIP.The hygroscopic study conducted on the different pastesprovided information on water content at a givenhumidity and its location, i.e., adsorbed on the surfaceof the pores or condensed inside them, obstructing thediffusion of CO2. The conclusion drawn from this studyof the curing process was that neither drying nor C3Shydration retarded lime carbonation.En este trabajo se estudia el proceso de carbonatacionen pastas mixtas de cal y cemento (100, 90, 80, 70, 60,50 y 40% de cal con el objeto de obtener un mejorconocimiento del proceso de curado en estos materiales.Para ello se ha empleado una cal aerea hidratada en polvoy un cemento Portland del tipo CEM II A/L 32,5. Enparticular, este estudio investiga estos materiales ya quepueden ser utilizados en la restauracion del PatrimonioCultural. Se ha utilizado la variacion de peso como indicadordel proceso de carbonatacion. Se ha establecidoun nuevo parametro, A, que varia inversamente con elporcentaje de cemento en la pasta, debido al predominiode la difusion de Knudsen como consecuencia de laestructura porosa, que ha sido estudiada por medio deporosimetria de intrusion de mercurio (PIM. El estudiohigroscopico realizado sobre las diversas pastas permiteconocer el contenido en agua a una

  17. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140014Deng Lin(College of Resources and Environment,Southwest Petroleum University,Chengdu 610500,China)Structural Geometry and Structural Kinematics of the Jiulongshan Structure in the North Longmenshan Mountains(Acta Geologica Sichuan,ISSN1006-0995,CN51-1273/P,33(1),2013,p.1-2,11,1illus.,9refs.)Key words:plate geometry,structural analysis,Longmenshan Fault Zone

  18. Sentence Structure

    CERN Document Server

    Fabb, Nigel

    2012-01-01

    Sentence Structure:introduces the evidence for sentence structure and reveals its purposeis based on a problem-solving approach to languageteaches the reader how to identify word classes, such as noun, preposition and demonstrativeuses simple tree structures to analyse sentencescontains numerous exercises to encourage practical skills of sentence analysisincludes a database and exercises that compare the structure of English with other languages.The second edition of Sentence Structure has been revised and updated throughout and includes new material on tense, aspect, modality and the verb phr

  19. PIMS(trademark): Remediation of Soil and Groundwater Contaminated With Metals. PIMS Remediation of Soil Contaminated with Lead at Camp Stanley Storage Activity, TX

    Science.gov (United States)

    2003-08-01

    epa.gov Federal Regulator Sonny Rayos Corrective Action Section Texas Commission on Environmental Quality MC-127, PO Box 13087 Austin, TX 78741-3087...Treatment Technology Brian K. Murphy, Environmental Officer, Camp Stanley Storage Activity, TX Mark Peterson, Parsons, Inc. Honolulu, HI Sonny Rayos

  20. Coilgun structures

    Science.gov (United States)

    Andrews, J. A.

    1993-01-01

    Recent research into the optimal design of 'coilgun' structures has indicated that structural requirements are strong functions of launcher classification as well as acceleration mode. Attention is presently given to both closed-form and numerical analytical techniques for coaxial DC accelerator (DCA) structural-design calculations. The DCA is a multistage pulsed-induction launcher that makes extensive use of composite materials technology; measured plastic deformations of the armature after a high energy experiment are compared to FEM analysis predictions.

  1. Protein Structure

    Science.gov (United States)

    Asmus, Elaine Garbarino

    2007-01-01

    Individual students model specific amino acids and then, through dehydration synthesis, a class of students models a protein. The students clearly learn amino acid structure, primary, secondary, tertiary, and quaternary structure in proteins and the nature of the bonds maintaining a protein's shape. This activity is fun, concrete, inexpensive and…

  2. Tau structures

    Directory of Open Access Journals (Sweden)

    Jesus Avila

    2016-11-01

    Full Text Available Tau is a microtubule-associated protein that plays an important role in axonal stabilization, neuronal development, and neuronal polarity. In this review, we focus on the primary, secondary, tertiary and quaternary tau structures. We describe the structure of tau from its specific residues until its conformation in dimers, oligomers and larger polymers in physiological and pathological situations.

  3. Organisational Structure

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2006

    2006-01-01

    An understanding of organisational structure can provide guidance for organisations that want to change and innovate. Many writers agree that this understanding allows organisations to shape how their work is done to ultimately achieve their business goals--and that too often structure is given little consideration in business strategy and…

  4. Vcsel structure

    DEFF Research Database (Denmark)

    2015-01-01

    The invention relates to a VCSEL structure based on a novel grating reflector. The grating reflector comprises a grating layer with a contiguous core grating region having a grating structure, wherein an index of refraction of high-index sections of the grating structure is at least 2.......5, and wherein an index of refraction of low-index sections of the grating structure is less than 2. The core grating region defines a projection in a direction normal to the grating layer. The grating reflector further comprises a cap layer abutting the grating layer, and an index of refraction of the cap layer...... the projection of the core grating region, the grating layer is also abutted by a second low-index layer and/or by air, an index of refraction of the second low-index layer or air being less than 2. The VCSEL structure furthermore comprises a first reflector and an active region for providing a cavity...

  5. The pars interna/media anatomy and histology in the human larynx.

    Science.gov (United States)

    Charpied, George L

    2007-01-01

    The pars interna/media (PIM) is a small muscle found in the human larynx that has not been successfully described in contemporary literature on laryngeal structure. The objective of this study was to describe the PIM's anatomy in detail. Thirteen human larynges obtained from postmortem examination were cleaned and preserved. Exposure of the PIM was through a lateral disarticulation of the cricothyroid joint and reflection of the cricothyroid muscle and the thyroid lamina. In the human, the PIM was found to be strap-like in form and to have two bellies with attachments to the medial surface of the thyroid cartilage at the root of the inferior horn and anteriosuperior cricoid arch. It appears to be innervated by a middle division, vestibular branch, of the internal superior laryngeal nerve. The average fiber diameter is 40 mum. Its type 1-to-type 2 fiber ratio places it within the range of other intrinsic laryngeal muscles. A muscle spindle was identified in medial bundle at the PIM's thyroid attachment. Thyroid medial surface attachment is within few millimeters of the muscular process of the arytenoid cartilage. These data show that the PIM is a robust muscle and deserves attention anatomically. Its orientation within the thyroid and nonrecurrent laryngeal nerve innervations of the human PIM may place it in the vocal fold tensor group rather than the laryngeal sphincter group. It is possible the PIM reports on cricothyroid distance and right versus left cricothyroid joint stresses. Electromyographic examination of the PIM in the Rhesus larynx may help elucidate its physiology to elaborate its human physiology.

  6. Structural Behaviour of Reciprocal Structures

    DEFF Research Database (Denmark)

    Parigi, Dario; Kirkegaard, Poul Henning

    2013-01-01

    The present paper focuses on the comparison of several two-dimensional and three-dimensional reciprocal configurations. The goal of such comparison is to analyse the structural behaviour when changing the geometric parameters used to describe the geometry of reciprocal structures....

  7. Structured light in structured media

    Science.gov (United States)

    Zeng, Jinwei

    The objective of this dissertation is to investigate fundamental optical phenomena at the interface between two emerging fields of modern optics - structured light and micro/nano-structured optical materials. Until recently, these fields were developing in parallel yet independently. A majority of researchers in the field of metamaterials and photonic crystals considered "simple" linearly or circularly polarized light or Gaussian beam propagation in "structured" materials with properties not found in nature. However, in addition to conventional polarization states, light beams can be radially or azimuthally polarized and carry orbital angular momentum (OAM). A fascinating example of a beam carrying OAM is the optical vortex---a donut-shaped beam with a helical phase front. Similarly, the structured light community largely focused on complex light propagation in rather simple homogeneous, isotropic, transparent media. In this dissertation, we explore fundamentals and applications of light-matter interactions that involve both complex light and complex media. The central question that we aim to tackle is: How may the synergy of these two fields lead to a breakthrough in modern photonics? Structured materials, including metamaterials and photonic bandgap structures, realize unprecedented control over light propagation and design flexibility. They can enable new optical properties and functionalities, including new regimes of wave guiding, negative index of refraction, magnetism at optical frequencies, and subwavelength imaging to name a few. We demonstrate how nearly unlimited possibilities in engineering the properties of structured media can be used for generation and manipulation of structured light. Also, we show how the unique properties of structured light could be used for characterization of structured media.

  8. A New Approach to Development of Composite Web Services

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the requirement for complex Web Services steadily increasing, there is a growing interest for reusing basic, existing Web Services to composite new ones. We present a composite Web Services development approach driven by model driven architecture (MDA): using UML(Unified Modeling Language) class diagram to model structure PIM(Plateform Independent Platform) and UML activity diagram to model behavior PIM, then by model transformation converting the PIMs to specific Web Services specification platforms and execution platform to get the corresponding PSMs (platform specific models). The main contributions of this paper are the all-around solution to Web Services composition development and the transformation rules for structure and behavior model of Web Services between PIMs and PSMs.

  9. Hydraulic Structures

    Data.gov (United States)

    Department of Homeland Security — This table is required whenever hydraulic structures are shown in the flood profile. It is also required if levees are shown on the FIRM, channels containing the...

  10. Hydraulic structures

    CERN Document Server

    Chen, Sheng-Hong

    2015-01-01

    This book discusses in detail the planning, design, construction and management of hydraulic structures, covering dams, spillways, tunnels, cut slopes, sluices, water intake and measuring works, ship locks and lifts, as well as fish ways. Particular attention is paid to considerations concerning the environment, hydrology, geology and materials etc. in the planning and design of hydraulic projects. It also considers the type selection, profile configuration, stress/stability calibration and engineering countermeasures, flood releasing arrangements and scouring protection, operation and maintenance etc. for a variety of specific hydraulic structures. The book is primarily intended for engineers, undergraduate and graduate students in the field of civil and hydraulic engineering who are faced with the challenges of extending our understanding of hydraulic structures ranging from traditional to groundbreaking, as well as designing, constructing and managing safe, durable hydraulic structures that are economical ...

  11. Nuclear Structure

    Science.gov (United States)

    Gargano, Angela

    2003-04-01

    An account of recent studies in the field of theoretical nuclear structure is reported. These studies concern essentially research activities performed under the Italian project "Fisica Teorica del Nucleo e dei Sistemi a Molti Corpi". Special attention is addressed to results obtained during the last two years as regards the development of new many-body techniques as well as the interpretation of new experimental aspects of nuclear structure.

  12. Foundation Structure

    OpenAIRE

    Schakenda, Bruno; Nielsen, Søren Andreas; Ibsen, Lars Bo

    2009-01-01

    Method of installing a bucket foundation structure comprising one, two, three or more skirts, into soils in a controlled manner. The method comprises two stages: a first stage being a design phase and the second stage being an installation phase. In the first stage, design parameters are determined relating to the loads on the finished foundation structure; soil profile on the location; allowable installation tolerances, which parameters are used to estimate the minimum diameter and length of...

  13. Tension Structure

    Science.gov (United States)

    1978-01-01

    The fabric structure pictured is the Campus Center of La Verne College, La Verne, California. Unlike the facilities shown on the preceding pages, it is not air-supported. It is a "tension structure," its multi-coned fabric membrane supported by a network of cables attached to steel columns which function like circus tent poles. The spider-web in the accompanying photo is a computer graph of the tension pattern. The designers, Geiger-Berger Associates PC, of New York City, conducted lengthy computer analysis to determine the the best placement of columns and cables. The firm also served as structural engineering consultant on the Pontiac Silverdome and a number of other large fabric structures. Built by Birdair Structures, Inc., Buffalo, New York, the La Verne Campus Center was the first permanent facility in the United States enclosed by the space-spinoff fabric made of Owens-Corning Beta fiber glass coated with Du Pont Teflon TFE. The flexible design permits rearrangement of the interior to accommodate athletic events, student activities, theatrical productions and other recreational programs. Use of fabric covering reduced building cost 30 percent below conventional construction.

  14. Adenovirus structure.

    Science.gov (United States)

    Rux, John J; Burnett, Roger M

    2004-12-01

    Structural studies continue to play an essential role as the focus of adenovirus research shifts in emphasis from basic biology to adenovirus-based vector technologies. A crucial step in developing novel therapeutics for gene replacement, cancer, and vaccines is often to modify the virion. Such engineered changes are designed to retarget the virus, or to reduce the immunological responses to infection. These efforts are far more effective when they are based on detailed structural knowledge. This minireview provides a brief summary of the wealth of information that has been obtained from the combined application of X-ray crystallography and electron microscopy. This knowledge now includes a good working model for the architectural organization of the virion, and atomic resolution molecular structures for all the major capsid proteins, hexon, penton, and fiber. We highlight new developments, which include the structure of the penton base and the discovery that adenovirus has several relatives. We sketch how the structural information can be used to engineer novel virions and conclude with the prospects for future progress.

  15. Data Structures

    DEFF Research Database (Denmark)

    Davoodi, Pooya

    weight in a query path; (3) the range diameter problem: given a point set in the plane, find two points that are farthest away in a query rectangle. These and similar problems arise in various applications including document retrieval, genome sequence analysis, OLAP data cubes, network flows, shape......-fitting, and clustering. The three mentioned problems are considered for either static inputs or dynamic inputs. In the static setting, we investigate the space-efficiency of data structures, which is an important aspect in massive data algorithmics. We provide lower bounds on the trade-off between the query time......-dimensional range minimum queries. In the dynamic setting, we present data structures for the path minima problem that support optimal query time for various types of update operations. One of the results presents a comparison-based data structure which answers path minima queries in sub-logarithmic time...

  16. Fireplace structure

    Energy Technology Data Exchange (ETDEWEB)

    Faehling, F.L.; Billmeyer, T.F.; Peterson, S.O.

    1984-09-18

    A fireplace having one or more conduits for directing outside combustion air into the firebox with a movable member adjacent a conduit outlet for normally closing said conduit and having either open or closed positions dependent upon the existence of a pressure difference across said member. A pressure difference caused by a fire in the firebox results in a higher pressure on the side of the member opposite the firebox to cause the member to move to open position. Operating structure is provided for positively closing the member and with the operating structure being operable from the front of the fireplace.

  17. Lightweight Structures.

    Science.gov (United States)

    Shaver and Co., Michigan City, IN.

    One of the newest and most promising developments in architecture has been the use of lightweight structures for encapsulating space. Using this new technology, builders can enclose large and small areas at a fraction of the cost of conventional construction and at the same time provide interior space that is totally flexible. This brochure shows…

  18. Structural parsing

    NARCIS (Netherlands)

    Hoede, C.; Zhang, Lei

    2000-01-01

    Parsing is an essential part of natural language processing. In this paper, structural parsing, which is based on the theory of knowledge graphs, is introduced. Under consideration of the semantic and syntactic features of natural language, both semantic and syntactic word graphs are formed. Grammar

  19. Coastal Structures

    DEFF Research Database (Denmark)

    Oumeraci, H.; Burcharth, H. F.; Rouck, J. De;

    1995-01-01

    The paper attempts to present an overview of five research projects supported by the Commission of the European Communities, Directorate General XII, under the MAST 2- Programme (Marine Sciences and Technology), with the overall objective of contributing to the development of improved rational me...... methods for the design of coastal structures....

  20. Organizational structure

    NARCIS (Netherlands)

    Hendriks, P.H.J.

    2011-01-01

    For many decades, organization scientists have paid considerable attention to the link between knowledge and organization structure. An early contributor to these discussions was Max Weber (1922), who elaborated his concepts of professional bureaucracy. History shows a multitude of other description

  1. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20130642 Bai Daoyuan (Hunan Institute of Geology Survey , Mineral Exploration and Development of Hunan Province , Changsha 410011 , China); Jia Baohua Potential Genesis of the Trending Changes of Jinning Period and Caledonian Structural Lineamens in Middle-Southern Hunan Province (Journal of Geomechanics , ISSN1006-6616 ,

  2. European structuralism

    OpenAIRE

    Willems, Klaas

    2014-01-01

    European structuralism is a paradigm for the study of language developed by prominent European linguists during the inter-war period and the first decades after World War II that radically rejected the prevailing atomism of 19th century (particularly neo-grammarian) linguistics and language psychology.

  3. Nuclear structure

    CERN Document Server

    Nazarewicz, W

    1999-01-01

    Current developments in nuclear structure are discussed from a theoretical perspective. The studies of the nuclear many-body system provide us with invaluable information about the nature of the nuclear interaction, nucleonic correlations at various energy-distance scales, and the modes of the nucleonic matter.

  4. A Carbonaceous Membrane based on a Polymer of Intrinsic Microporosity (PIM-1) for Water Treatment

    Science.gov (United States)

    Kim, Hee Joong; Kim, Dong-Gyun; Lee, Kyuchul; Baek, Youngbin; Yoo, Youngjae; Kim, Yong Seok; Kim, Byoung Gak; Lee, Jong-Chan

    2016-01-01

    As insufficient access to clean water is expected to become worse in the near future, water purification is becoming increasingly important. Membrane filtration is the most promising technologies to produce clean water from contaminated water. Although there have been many studies to prepare highly water-permeable carbon-based membranes by utilizing frictionless water flow inside the carbonaceous pores, the carbon-based membranes still suffer from several issues, such as high cost and complicated fabrication as well as relatively low salt rejection. Here, we report for the first time the use of microporous carbonaceous membranes via controlled carbonization of polymer membranes with uniform microporosity for high-flux nanofiltration. Further enhancement of membrane performance is observed by O2 plasma treatment. The optimized membrane exhibits high water flux (13.30 LMH Bar−1) and good MgSO4 rejection (77.38%) as well as antifouling properties. This study provides insight into the design of microporous carbonaceous membranes for water purification. PMID:27782212

  5. Photo-physics study of an hydroxy-quinoline derivative as inhibitor of Pim-1 kinase

    DEFF Research Database (Denmark)

    Lamhasni, T.; Aitlyazidi, S.; Hnach, M.

    2013-01-01

    The photophysical properties of the antiviral 7-nicotinoyl-styrylquinoline (MB96) were investigated by means of UV-Vis linear dichroism (LD) spectroscopy on molecular samples aligned in stretched polyvinylalcohol (PVA), supported by Time Dependent Density Functional Theory (TD-DFT) calculations...

  6. ISOLATION AND CHARACTERIZATION OF PEROXISOMAL PROTEIN IMPORT (PIM-) MUTANTS OF HANSENULA-POLYMORPHA

    NARCIS (Netherlands)

    WATERHAM, HR; TITORENKO, [No Value; VANDERKLEI, IJ; HARDER, W; VEENHUIS, M

    1992-01-01

    In the course of our studies on the molecular mechanisms involved in peroxisome biogenesis, we have isolated several mutants of the methylotrophic yeast Hansenula polymorpha impaired in the import of peroxisomal matrix proteins. These mutants are characterized by the presence of few small intact per

  7. Powder Injection Molding (PIM) for Low Cost Manufacturing of Intricate Parts to Net-Shape

    Science.gov (United States)

    2006-05-01

    surface finish and high speed production. The activities and expertise in powder metallurgy as well as in process numerical modeling related to... traitement de finition immediate), The original document contains color images. 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17...many different axes in the part design. In addition, external and internal threads, surface features (knurled surface , letters and logos) can be

  8. Pim1 kinase protects airway epithelial cells from cigarette smoke-induced damage and airway inflammation

    NARCIS (Netherlands)

    de Vries, M.; Heijink, Hilde; Gras, R.; den Boef, L. E.; Reinders-Luinge, M.; Pouwels, S. D.; Hylkema, Machteld; van der Toorn, Marco; Brouwer, U.; van Oosterhout, A. J. M.; Nawijn, M. C.

    2014-01-01

    Exposure to cigarette smoke (CS) is the main risk factor for developing chronic obstructive pulmonary disease and can induce airway epithelial cell damage, innate immune responses, and airway inflammation. We hypothesized that cell survival factors might decrease the sensitivity of airway epithelial

  9. A Carbonaceous Membrane based on a Polymer of Intrinsic Microporosity (PIM-1) for Water Treatment

    Science.gov (United States)

    Kim, Hee Joong; Kim, Dong-Gyun; Lee, Kyuchul; Baek, Youngbin; Yoo, Youngjae; Kim, Yong Seok; Kim, Byoung Gak; Lee, Jong-Chan

    2016-10-01

    As insufficient access to clean water is expected to become worse in the near future, water purification is becoming increasingly important. Membrane filtration is the most promising technologies to produce clean water from contaminated water. Although there have been many studies to prepare highly water-permeable carbon-based membranes by utilizing frictionless water flow inside the carbonaceous pores, the carbon-based membranes still suffer from several issues, such as high cost and complicated fabrication as well as relatively low salt rejection. Here, we report for the first time the use of microporous carbonaceous membranes via controlled carbonization of polymer membranes with uniform microporosity for high-flux nanofiltration. Further enhancement of membrane performance is observed by O2 plasma treatment. The optimized membrane exhibits high water flux (13.30 LMH Bar-1) and good MgSO4 rejection (77.38%) as well as antifouling properties. This study provides insight into the design of microporous carbonaceous membranes for water purification.

  10. Data Structures

    DEFF Research Database (Denmark)

    Davoodi, Pooya

    We study data structures for variants of range query problems. In particular, we consider (1) the range minimum problem: given a multidimensional array, find the position of the minimum element in a query rectangle; (2) the path minima problem: given a weighted tree, find the edge with minimum...... weight in a query path; (3) the range diameter problem: given a point set in the plane, find two points that are farthest away in a query rectangle. These and similar problems arise in various applications including document retrieval, genome sequence analysis, OLAP data cubes, network flows, shape......-fitting, and clustering. The three mentioned problems are considered for either static inputs or dynamic inputs. In the static setting, we investigate the space-efficiency of data structures, which is an important aspect in massive data algorithmics. We provide lower bounds on the trade-off between the query time...

  11. Syllable structure

    Directory of Open Access Journals (Sweden)

    Jakobsen Per

    2008-01-01

    Full Text Available In traditional structuralist understanding, language is a system of signs i.e. an inseparable unity of content and expression. According to glossematic linguistic theory, the dichotomy of form and substance in the content has its parallel in the expression. The present paper shows that in one language certain consonant clusters within the syllable are allowed, in other languages they are not. The phonotactic structure, i.e. the rules of forming syllables decide the forming of new words and identify the language at the same time. This fundamental syllable structure shows that it is scientifically untenable to maintain that the Serbo-Croatian language has split up in several new languages. .

  12. Concrete structures

    CERN Document Server

    Setareh, Mehdi

    2017-01-01

    This revised, fully updated second edition covers the analysis, design, and construction of reinforced concrete structures from a real-world perspective. It examines different reinforced concrete elements such as slabs, beams, columns, foundations, basement and retaining walls and pre-stressed concrete incorporating the most up-to-date edition of the American Concrete Institute Code (ACI 318-14) requirements for the design of concrete structures. It includes a chapter on metric system in reinforced concrete design and construction. A new chapter on the design of formworks has been added which is of great value to students in the construction engineering programs along with practicing engineers and architects. This second edition also includes a new appendix with color images illustrating various concrete construction practices, and well-designed buildings. The ACI 318-14 constitutes the most extensive reorganization of the code in the past 40 years. References to the various sections of the ACI 318-14 are pro...

  13. Terminal structure

    Science.gov (United States)

    Schmidt, Frank; Allais, Arnaud; Mirebeau, Pierre; Ganhungu, Francois; Lallouet, Nicolas

    2009-10-20

    A terminal structure (2) for a superconducting cable (1) is described. It consists of a conductor (2a) and an insulator (2b) that surrounds the conductor (2a), wherein the superconducting cable (1) has a core with a superconducting conductor (5) and a layer of insulation that surrounds the conductor (5), and wherein the core is arranged in such a way that it can move longitudinally in a cryostat. The conductor (2a) of the terminal structure (2) is electrically connected with the superconducting conductor (5) or with a normal conductor (6) that is connected with the superconducting conductor (5) by means of a tubular part (7) made of an electrically conductive material, wherein the superconducting conductor (5) or the normal conductor (6) can slide in the part (7) in the direction of the superconductor.

  14. Lightweight Structures

    Science.gov (United States)

    Whittenberger, J. Daniel

    2001-01-01

    Present structural concepts for hot static structures are conventional "sheet & stringer" or truss core construction. More weight-efficient concepts such as honeycomb and lattice block are being investigated, in combination with both conventional superalloys and TiAl. Development efforts for components made from TiAl sheet are centered on lower cost methods for sheet and foil production, plus alloy development for higher temperature capability. A low-cost casting technology recently developed for aluminum and steel lattice blocks has demonstrated the required higher strength and stiffness, with weight efficiency approach- ing honeycombs. The current effort is based on extending the temperature capability by developing lattice block materials made from IN-718 and Mar-M247.

  15. STRUCTURAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>20122174 Bai Daoyuan ( Institute of Geological Survey of Hunan Province,Changsha 410011,China );Jia Baohua Neoproterozoic TectonicEvolution of the Xuefeng Orogenic Zone in Hunan Province ( Sedimentary Geology and Tethyan Geology,ISSN1009-3850,CN51-1593 / P,31 ( 3 ), 2011,p.78-87,2illus.,1 table,96refs. ) Key words:structural evolution,Neoproterozoic Era,Hunan Province This paper deals,on the basis of abundant lithogeochemical and geochronologic

  16. Structural dynamics

    CERN Document Server

    Strømmen, Einar N

    2014-01-01

    This book introduces to the theory of structural dynamics, with focus on civil engineering structures that may be described by line-like beam or beam-column type of systems, or by a system of rectangular plates. Throughout this book the mathematical presentation contains a classical analytical description as well as a description in a discrete finite element format, covering the mathematical development from basic assumptions to the final equations ready for practical dynamic response predictions. Solutions are presented in time domain as well as in frequency domain. Structural Dynamics starts off at a basic level and step by step brings the reader up to a level where the necessary safety considerations to wind or horizontal ground motion induced dynamic design problems can be performed. The special theory of the tuned mass damper has been given a comprehensive treatment, as this is a theory not fully covered elsewhere. For the same reason a chapter on the problem of moving loads on beams has been included.

  17. Microplastic Structures

    Science.gov (United States)

    Feely, Wayne E.

    1986-07-01

    Thick coatings (5-15μm) of a new dual image, aqueous developable photoresist can be exposed using a light attenuating photomask consisting of clear, opaque and grey areas and then processed to yield thermally stable 3-dimensional structures which are potentially useful as mechanical and optical components of devices. In the positive mode, relief and intaglio images are produced by processing similar to positive novolak based resists with 1- 2μm resolution and with the added feature that the images can be made thermally stable to temperatures >300° C. Negative mode processing of coated wafers imaged with the special mask produces thermally stable structures with tunnels or hollow chambers as well as cantilever beams. Because these structures are crosslinked at the time of development, processing in the negative mode shows much wider latitude than is the case in the positive mode. Images by negative mode processing are capable of submicron resolution, higher aspect ratio (>3 vs resin compositions cover a broad range of compositions so that resins can be tailored to meet specific property requirements.

  18. Effects of short-term tocopherol (T) feeding on structure-localized protein tyrosine nitration (pTN) patterns of mitochondrial ATPase following endotoxin (LPS) challenge in beef calves.

    Science.gov (United States)

    Mitochondrial ATPase/Complex-V (MCV) is an electron transport chain (ETC) component needed for ATP synthesis. The ETC, exquisitely sensitive to proinflammatory mediators (PIM), generates oxynitrogen reactants leading to pTN formation as mitochondrial membrane leakage occurs. Immunohistochemical loca...

  19. STRUCTURED BACKWARD ERRORS FOR STRUCTURED KKT SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    Xin-xiu Li; Xin-guo Liu

    2004-01-01

    In this paper we study structured backward errors for some structured KKT systems.Normwise structured backward errors for structured KKT systems are defined, and computable formulae of the structured backward errors are obtained. Simple numerical examples show that the structured backward errors may be much larger than the unstructured ones in some cases.

  20. How Much Do Ultrathin Polymers with Intrinsic Microporosity Swell in Liquids?

    KAUST Repository

    Ogieglo, Wojciech

    2016-09-13

    As synthetic membrane materials, polymers with intrinsic microporosity (PIMs) have demonstrated unprecedented permeation and molecular-separation properties. Here, we report the swelling characteristics of submicron-thick supported films of spirobisindane-based PIMs, PIM-1 and PIM-6FDA-OH, for six organic solvents and water using in situ spectroscopic ellipsometry. Surprisingly, PIMs swell significantly in most organic solvents, with swelling factors (SF = h/h) as high as 2.5. This leads to the loss of the ultrarigid character of the polymer and produces equilibrated liquid-like swollen films. Filling of the excess frozen-in fractional free volume with liquid was discovered next to swelling-induced polymer matrix dilation. Water hardly swells the polymer matrix, but it penetrates into the intrinsic microporous structure. This study is the first to provide fundamental swelling data for PIMs, leading to better comprehension of their permeation properties. Such an understanding is indispensable for applications such as solvent filtration, natural-gas separation, and ion retention in flow batteries.

  1. Stoker structure

    Energy Technology Data Exchange (ETDEWEB)

    Mros, F.

    1981-11-10

    A screw-conveyor or auger feed and associated leveling system are disclosed for underfeed stoker troughs receiving particulate, cominuted, or chunk material, such as ''green'' coal, by way of example, this for assuring a uniformly rising level of material relative to the trough. The stoker structure herein includes combustion beds which are air perforate and kept this way through periodically rising members such as tuyeres which shear or break up clinkerformation on such beds. A pneumatically-operated system may preferably be used to actuate such movable tuyeres relative to such combustion beds. Combustion air flows through the combustion beds upwardly but not over the trough; hot gasses rising rapidly from the combustion beds confine volatiles gently rising vertically from the cone within the trough for complete combustion, essentially eliminating smoke-production thereat.

  2. Structural Discrimination

    DEFF Research Database (Denmark)

    Thorsen, Mira Skadegård

    In this article, I discuss structural discrimination, an underrepresented area of study in Danish discrimination and intercultural research. It is defined here as discursive and constitutive, and presented as a central element of my analytical approach. This notion is employed in the with which...... to understand and identify aspects of power and asymmetry in communication and interactions. With this as a defining term, I address how exclusion and discrimination exist, while also being indiscernible, within widely accepted societal norms. I introduce the concepts of microdiscrimination and benevolent...... discrimination as two ways of articulating particular, opaque forms of racial discrimination that occur in everyday Danish (and other) contexts, and have therefore become normalized. I present and discuss discrimination as it surfaces in data from my empirical studies of discrimination in Danish contexts...

  3. Structural Bionic Design of Machine Tool Structures

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ling; WANG Ting; GUO Hong-liang; LI Guo-meng

    2011-01-01

    A structural bionic design process is systematically presented for lightweight mechanical structures. By mimicking biological excellent structural principles, the stiffening ribs of a machining table and a moving column were redesigned for better load-bearing efficiency. Finite element method(FEM) simulation and model experiments were carried out for performance verification, which showed the increase of structural static and dynamic performance. Structural bionic offers a new solution to change conventional structures for high specific stiffness.

  4. Asteroid structure

    Science.gov (United States)

    Asphaug, E.

    2014-07-01

    Even before the first space missions to asteroids, in the mid-1990s, it was known that asteroids have weird structures. Photometry indicated complicated shapes, and the pioneering radar investigations by Ostro and colleagues followed by adaptive optics campaigns and flybys showed odd binary forms, and confirmed the common presence of satellites, and indications of highly varying surface roughness. Some asteroids turned out to be dominated by a single major cratering event, while others showed no evidence of a major crater, or perhaps for global crater erasure. The first space mission to orbit an asteroid, NEAR, found a mixture of heavily cratered terrains and geomorphically active 'ponds', and indicated evidence for global seismicity from impact. The next mission to orbit an asteroid, Hayabusa, found what most agree is a rubble pile, with no major craters and an absence of fines. There is to date no direct evidence of asteroid interior geology, other than measurements of bulk density, and inferences made for mass distribution asymmetry based on dynamics, and inferences based on surface lineaments. Interpolating from the surface to the interior is always risky and usually wrong, but of course the answer is important since we are someday destined to require this knowledge in order to divert a hazardous asteroid from impact with the Earth. Even considering the near-subsurface, here we remain as ignorant as we were about the Moon in the early 1960s, whether the surface will swallow us up in dust, or will provide secure landing and anchoring points. Laboratory experimentation in close to zero-G is still in its early stages. Adventures such as mining and colonization will surely have to wait until we better know these things. How do we get from here to there? I will focus on 3 areas of progress: (1) asteroid cratering seismology, where we use the surface craters to understand what is going on inside; (2) numerical modeling of collisions, which predicts the internal

  5. Structural Biology Fact Sheet

    Science.gov (United States)

    ... Home > Science Education > Structural Biology Fact Sheet Structural Biology Fact Sheet Tagline (Optional) Middle/Main Content Area ​Other Fact Sheets What is structural biology? Structural biology is the study of how biological ...

  6. Collapsible Geostrut Structure

    Science.gov (United States)

    Robertson, Glen A.

    1994-01-01

    Portable truss structure collapsible into smaller volume for storage and transportation. At new site, reerected quickly, without need to reassemble parts. Structure could be tent, dome, tunnel, or platform. Key element in structure joint, called "geostrut joint," includes internal cable. Structure is network of struts attached to geostrut joints. Pulling cables taut in all joints makes structure rigid. Releasing cables relaxes structure.

  7. Magnetic multilayer structure

    Energy Technology Data Exchange (ETDEWEB)

    Herget, Philipp; O' Sullivan, Eugene J.; Romankiw, Lubomyr T.; Wang, Naigang; Webb, Bucknell C.

    2017-03-21

    A mechanism is provided for an integrated laminated magnetic device. A substrate and a multilayer stack structure form the device. The multilayer stack structure includes alternating magnetic layers and diode structures formed on the substrate. Each magnetic layer in the multilayer stack structure is separated from another magnetic layer in the multilayer stack structure by a diode structure.

  8. Magnetic multilayer structure

    Science.gov (United States)

    Herget, Philipp; O'Sullivan, Eugene J.; Romankiw, Lubomyr T.; Wang, Naigang; Webb, Bucknell C.

    2016-07-05

    A mechanism is provided for an integrated laminated magnetic device. A substrate and a multilayer stack structure form the device. The multilayer stack structure includes alternating magnetic layers and diode structures formed on the substrate. Each magnetic layer in the multilayer stack structure is separated from another magnetic layer in the multilayer stack structure by a diode structure.

  9. Structural Analysis of Plate Based Tensegrity Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Damkilde, Lars

    2013-01-01

    Plate tensegrity structures combine tension cables with a cross laminated timber plate and can then form e.g. a roof structure. The topology of plate tensegrity structures is investigated through a parametric investigation. Plate tensegrity structures are investigated, and a method...... for determination of the structures pre-stresses is used. A parametric investigation is performed to determine a more optimized form of the plate based tensegrity structure. Conclusions of the use of plate based tensegrity in civil engineering and further research areas are discussed....

  10. Structural Analysis of Plate Based Tensegrity Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Damkilde, Lars

    2013-01-01

    Plate tensegrity structures combine tension cables with a cross laminated timber plate and can then form e.g. a roof structure. The topology of plate tensegrity structures is investigated through a parametric investigation. Plate tensegrity structures are investigated, and a method...... for determination of the structures pre-stresses is used. A parametric investigation is performed to determine a more optimized form of the plate based tensegrity structure. Conclusions of the use of plate based tensegrity in civil engineering and further research areas are discussed....

  11. Computational structural mechanics for engine structures

    Science.gov (United States)

    Chamis, C. C.

    1989-01-01

    The computational structural mechanics (CSM) program at Lewis encompasses: (1) fundamental aspects for formulating and solving structural mechanics problems, and (2) development of integrated software systems to computationally simulate the performance/durability/life of engine structures. It is structured to mainly supplement, complement, and whenever possible replace, costly experimental efforts which are unavoidable during engineering research and development programs. Specific objectives include: investigate unique advantages of parallel and multiprocesses for: reformulating/solving structural mechanics and formulating/solving multidisciplinary mechanics and develop integrated structural system computational simulators for: predicting structural performances, evaluating newly developed methods, and for identifying and prioritizing improved/missing methods needed. Herein the CSM program is summarized with emphasis on the Engine Structures Computational Simulator (ESCS). Typical results obtained using ESCS are described to illustrate its versatility.

  12. Common structure-balance between spacetime structure and massenergy structure

    Science.gov (United States)

    Cao, Daqing; Cao, Dayong

    2017-01-01

    According to Einstein field equation, there is a balance between spacetime structure and massenergy structure. nd the paper consider it as a common structurewhich was brought forward by Daqing Cao in 2011 ecause it is general structure in the universe and everything have the same model of structure in their one system. The Jovian planets is spacetime structure of solar system because they are gas-sphere and they have more density of spacetime (spacetime/massenergy) than the density of massenergy (massenergy/spacetime). The terrestrial planets is massenergy structure of solar system because they are rock-ball and they have more density of massenergy than the density of spacetime. That can explain of that the Jovian planets of big mass is far away from sun. With the idea that the wave is spacetime and the wave effect is spacetime structure, the planets have elliptic orbits and the same direction of their revolution. Because sun is like a massenergy center of the massenergy structure and the terrestrial planets, the paper supposes there is a dark sun-a dark hole who has a spacetime center of spacetime structure and influences on the orbits of the Jovian planets. http://meetings.aps.org/Meeting/APR16/Session/M13.8

  13. Offshore Structural Control Considering Fluid Structure Interaction

    Institute of Scientific and Technical Information of China (English)

    Ju Myung KIM; Dong Hyawn KIM; Gyu Won LEE

    2006-01-01

    Tuned Mass Damper (TMD) was applied to an offshore structure to control ocean wave-induced vibration. In the analysis of the dynamic response of the offshore structure, fluid-structure interaction is considered and the errors, which occur in the linearization of the interaction, are investigated. For the investigation of the performance of TMD in controlling the vibration, both regular waves with different periods and irregular waves with different significant wave heights are used. Based on the numerical analysis it is concluded that the fluid-structure interaction should be considered in the evaluation of the capability of TMD in vibration control of offshore structures.

  14. Designing pliable structural Skins

    DEFF Research Database (Denmark)

    Tamke, Martin; Peters, Brady; Nielsen, Stig Anton;

    2013-01-01

    Structural stability can be formed through structured or seemingly unstructured approaches to fold, plead or crumble paper. This paper reports on two projects that showcase how computational design approaches can help to widen the understanding and use of structural skins....

  15. Study of Boundary Structures.

    Science.gov (United States)

    1982-09-01

    THEORY OF ABC-CBA STACKING BOUNDARY IN fcc STRUCTURE .......... 11 - 4 TRANSITIONS AND PHASE EQUILIBRIA AMONG GRAIN BOUNDARY STRUCTURES...19 B THEORY OF ABC-CBA STACKING BOUNDARY IN fcc STRUCTURE .......... 37 C TRANSITIONS AND PHASE EQUILIBRIA AMONG GRAIN BOUNDARY...layer structure. 10 SECTION 3 THEORY OF ABC-CBA STACKING BOUNDARY IN fcc STRUCTURE The (111) planes of the fcc structure is stacked as ABCABC... as

  16. Protein structure search and local structure characterization

    Directory of Open Access Journals (Sweden)

    Ku Shih-Yen

    2008-08-01

    Full Text Available Abstract Background Structural similarities among proteins can provide valuable insight into their functional mechanisms and relationships. As the number of available three-dimensional (3D protein structures increases, a greater variety of studies can be conducted with increasing efficiency, among which is the design of protein structural alphabets. Structural alphabets allow us to characterize local structures of proteins and describe the global folding structure of a protein using a one-dimensional (1D sequence. Thus, 1D sequences can be used to identify structural similarities among proteins using standard sequence alignment tools such as BLAST or FASTA. Results We used self-organizing maps in combination with a minimum spanning tree algorithm to determine the optimum size of a structural alphabet and applied the k-means algorithm to group protein fragnts into clusters. The centroids of these clusters defined the structural alphabet. We also developed a flexible matrix training system to build a substitution matrix (TRISUM-169 for our alphabet. Based on FASTA and using TRISUM-169 as the substitution matrix, we developed the SA-FAST alignment tool. We compared the performance of SA-FAST with that of various search tools in database-scale search tasks and found that SA-FAST was highly competitive in all tests conducted. Further, we evaluated the performance of our structural alphabet in recognizing specific structural domains of EGF and EGF-like proteins. Our method successfully recovered more EGF sub-domains using our structural alphabet than when using other structural alphabets. SA-FAST can be found at http://140.113.166.178/safast/. Conclusion The goal of this project was two-fold. First, we wanted to introduce a modular design pipeline to those who have been working with structural alphabets. Secondly, we wanted to open the door to researchers who have done substantial work in biological sequences but have yet to enter the field of protein

  17. Deployable Composite Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is seeking innovative structure technologies that will advance expandable modules for orbital and surface based habitats. These secondary structures must...

  18. Composite Structures Manufacturing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Composite Structures Manufacturing Facility specializes in the design, analysis, fabrication and testing of advanced composite structures and materials for both...

  19. Distributed Structure Searchable Toxicity

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Distributed Structure Searchable Toxicity (DSSTox) online resource provides high quality chemical structures and annotations in association with toxicity data....

  20. Protein structure mining using a structural alphabet.

    Science.gov (United States)

    Tyagi, M; de Brevern, A G; Srinivasan, N; Offmann, B

    2008-05-01

    We present a comprehensive evaluation of a new structure mining method called PB-ALIGN. It is based on the encoding of protein structure as 1D sequence of a combination of 16 short structural motifs or protein blocks (PBs). PBs are short motifs capable of representing most of the local structural features of a protein backbone. Using derived PB substitution matrix and simple dynamic programming algorithm, PB sequences are aligned the same way amino acid sequences to yield structure alignment. PBs are short motifs capable of representing most of the local structural features of a protein backbone. Alignment of these local features as sequence of symbols enables fast detection of structural similarities between two proteins. Ability of the method to characterize and align regions beyond regular secondary structures, for example, N and C caps of helix and loops connecting regular structures, puts it a step ahead of existing methods, which strongly rely on secondary structure elements. PB-ALIGN achieved efficiency of 85% in extracting true fold from a large database of 7259 SCOP domains and was successful in 82% cases to identify true super-family members. On comparison to 13 existing structure comparison/mining methods, PB-ALIGN emerged as the best on general ability test dataset and was at par with methods like YAKUSA and CE on nontrivial test dataset. Furthermore, the proposed method performed well when compared to flexible structure alignment method like FATCAT and outperforms in processing speed (less than 45 s per database scan). This work also establishes a reliable cut-off value for the demarcation of similar folds. It finally shows that global alignment scores of unrelated structures using PBs follow an extreme value distribution. PB-ALIGN is freely available on web server called Protein Block Expert (PBE) at http://bioinformatics.univ-reunion.fr/PBE/.

  1. Structural behaviour of super-light structures

    DEFF Research Database (Denmark)

    Bagger, Anne; Hertz, Kristian Dahl

    2010-01-01

    with a lighter and softer material, such as lightweight concrete. The combined use of stiff and light material in SLS results in structures of high stiffness and low weight. The applied technology and the advantages of SLS are elaborated upon in [1] in these proceedings. The present paper focuses......A new structural concept, called Super-light Structures (SLS), has recently been invented and patented at the Technical University of Denmark. The basic concept of SLS is to construct a skeleton of a stiff and strong material, such as ordinary or high strength concrete, and stabilize this skeleton...... on the structural correlation between the stiff material and the light material. The shape of the skeleton can be optimized for the primary load on the structure, and it will take up the majority of the load. The lighter material forms the outer geometry of the structural component (e.g. a wall), and has several...

  2. LINAC4

    CERN Multimedia

    2017-01-01

    The film illustrates CERN’s new linear accelerator for negative hydrogen ions (H-) Linac4. The klystron hall is shown. In the linac4 tunnel: the H- source, the radiofrequency quadrupole (RFQ), Drift tube (DTL), CCDTL and Pi-mode accelerating structure are shown. The H- dump and transfer line gallery towards the PS-booster are shown. Eventually the bird’s eye view of the booster and PS ring accelerators are shown.

  3. Chinese Conversation Structure

    Institute of Scientific and Technical Information of China (English)

    LIU Yan

    2016-01-01

    This paper aims to describe the features of Chinese conversation structure. Specifically speaking, the structure will be analyzed from the following four aspects:openings and pre-sequence, adjacency pairs, pre-closing and closing. Generally speak-ing, Chinese conversation structure is similar to English conversation structure. But still a lot of differences are found due to cul-tural factors.

  4. Crystal structure and prediction.

    Science.gov (United States)

    Thakur, Tejender S; Dubey, Ritesh; Desiraju, Gautam R

    2015-04-01

    The notion of structure is central to the subject of chemistry. This review traces the development of the idea of crystal structure since the time when a crystal structure could be determined from a three-dimensional diffraction pattern and assesses the feasibility of computationally predicting an unknown crystal structure of a given molecule. Crystal structure prediction is of considerable fundamental and applied importance, and its successful execution is by no means a solved problem. The ease of crystal structure determination today has resulted in the availability of large numbers of crystal structures of higher-energy polymorphs and pseudopolymorphs. These structural libraries lead to the concept of a crystal structure landscape. A crystal structure of a compound may accordingly be taken as a data point in such a landscape.

  5. Strategy implemented through structuring and new structures

    DEFF Research Database (Denmark)

    Nielsen, Renate

    Research objective: With the purpose of generating a new understanding of how development in organisations take place, an interpretive perspective at continuous processes in organisations will be applied: more specifically at how organisational interpretation forms an organisation's strategy...... and how the strategy is implemented through structuring, new structures and routines....

  6. Internal structure of structurally stitched NCF preform

    NARCIS (Netherlands)

    Koissin, V.; Ruopp, A.; Lomov, S.V.; Verpoest, I.; Witzel, V.; Drechsler, K.

    2006-01-01

    The paper addresses the experimental investigation of the unit cell architecture in a structurally stitched multilayer carbon-fibre preform. Each layer is a multiaxial multiply non-crimp fabric (NCF) knit with a non-structural stitching. The term “structural” presumes here that the stitching yarn do

  7. Influence of the metakaolin on porous structure of matrixes based in mk/cement

    Directory of Open Access Journals (Sweden)

    Frías, M.

    2000-09-01

    Full Text Available The incorporation of pozzolanic materials in the manufacturing of blended cement has a positive effect on the improvement of blended mortar and concretes performances. These active additions modify porous structure, impeding or delaying the access of aggressive solutions and, therefore materials more durable are possible of obtaining. An increase or decrease on the durability of blended pastes, mortars and concretes will depend on chemical and mineralogical compositions, fineness and reaction kinetics of these pozzolans. The current work shows the results of a research carried out in blended pastes to know the effect of activated material (metakaolin on the microporosity of pastes elaborated with different amounts of mk (0-25%. A water/ binder ratio of 0,55 was used. Samples were cured at 20ºC for 360 days. The evolution of total, capilary and gel porosity as well as average pore size were carried out through mercury intrusion porosimeter (MIP. Also, the helium pycnometer as alternative method to obtain additional information about porosity above 1,4 Å was used. A good correlation between both methods has been obtained. In addition, it is proposed the best mk content for the elaboration of mk-blended pastes.

    La incorporación de materiales puzolánicos presenta un efecto positivo en la mejora de las prestaciones de los morteros y hormigones mixtos. Estos modifican la estructura porosa, impidiendo o retrasando el acceso de los medios agresivos y, por lo tanto, contribución a la obtención de materiales mixtos más durables. La mayor o menor durabilidad de las pastas, morteros y hormigones mixtos dependerá de la composición química, mineralógica, finura y de la cinética de reacción de estas adiciones activas. En el presente trabajo se recogen los resultados de una investigación llevada a cabo para conocer el efecto de un material activado (metacaolin en la microporosidad de pastas, elaboradas con diferentes contenidos de

  8. Imaging resolution of AFM with probes modified with FIB.

    Science.gov (United States)

    Skibinski, J; Rebis, J; Wejrzanowski, T; Rozniatowski, K; Pressard, K; Kurzydlowski, K J

    2014-11-01

    This study concerns imaging of the structure of materials using AFM tapping (TM) and phase imaging (PI) mode, using probes modified with focused ion beam (FIB). Three kinds of modifications were applied - thinning of the cantilever, sharpening of the tip and combination of these two modifications. Probes shaped in that way were used for AFM investigations with Bruker AFM Nanoscope 8. As a testing material, titanium roughness standard supplied by Bruker was used. The results show that performed modifications influence the oscillation of the probes. In particular thinning of the cantilever enables one to acquire higher self-resonant frequencies, which can be advantageous for improving the quality of imaging in PI mode. It was found that sharpening the tip improves imaging resolution in tapping mode, which is consistent with existing knowledge, but lowered the quality of high frequency topography images. In this paper the Finite Element Method (FEM) was used to explain the results obtained experimentally.

  9. Building a Structural Model: Parameterization and Structurality

    Directory of Open Access Journals (Sweden)

    Michel Mouchart

    2016-04-01

    Full Text Available A specific concept of structural model is used as a background for discussing the structurality of its parameterization. Conditions for a structural model to be also causal are examined. Difficulties and pitfalls arising from the parameterization are analyzed. In particular, pitfalls when considering alternative parameterizations of a same model are shown to have lead to ungrounded conclusions in the literature. Discussions of observationally equivalent models related to different economic mechanisms are used to make clear the connection between an economically meaningful parameterization and an economically meaningful decomposition of a complex model. The design of economic policy is used for drawing some practical implications of the proposed analysis.

  10. Band structure of semiconductors

    CERN Document Server

    Tsidilkovski, I M

    2013-01-01

    Band Structure of Semiconductors provides a review of the theoretical and experimental methods of investigating band structure and an analysis of the results of the developments in this field. The book presents the problems, methods, and applications in the study of band structure. Topics on the computational methods of band structure; band structures of important semiconducting materials; behavior of an electron in a perturbed periodic field; effective masses and g-factors for the most commonly encountered band structures; and the treatment of cyclotron resonance, Shubnikov-de Haas oscillatio

  11. Structural system identification: Structural dynamics model validation

    Energy Technology Data Exchange (ETDEWEB)

    Red-Horse, J.R.

    1997-04-01

    Structural system identification is concerned with the development of systematic procedures and tools for developing predictive analytical models based on a physical structure`s dynamic response characteristics. It is a multidisciplinary process that involves the ability (1) to define high fidelity physics-based analysis models, (2) to acquire accurate test-derived information for physical specimens using diagnostic experiments, (3) to validate the numerical simulation model by reconciling differences that inevitably exist between the analysis model and the experimental data, and (4) to quantify uncertainties in the final system models and subsequent numerical simulations. The goal of this project was to develop structural system identification techniques and software suitable for both research and production applications in code and model validation.

  12. Rheology of Structured Oils

    Science.gov (United States)

    Kelbaliev, G. I.; Rasulov, S. R.; Rzaev, A. G.; Mustafaeva, G. R.

    2017-07-01

    Rheological models of structured oils are proposed and compared with available experimental data on oils from different deposits. It is shown that structured oils can possess properties of Bingham and power-law non-Newtonian fluids.

  13. Structural Measures - Hospital

    Data.gov (United States)

    U.S. Department of Health & Human Services — A list of hospitals and the availability of structural measures at that hospital. A structural measure reflects the environment in which hospitals care for patients....

  14. Structural Static Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Structural testing is performed to verify the structural integrity of space flight and ground test hardware. Testing is also performed to verify the finite element...

  15. Growing Timber Structures

    DEFF Research Database (Denmark)

    Tamke, Martin; Evers, Henrik Leander; Stasiuk, David

    2013-01-01

    The contemporary design of timber structures has to answer questions concerning structural stability, production impact and energy implications in ever earlier stages. The interrelation of these levels creates a complexity that is difficult to resolve through contemporary linear parametric...

  16. Advanced structural inorganic chemistry

    CERN Document Server

    Li, Wai-Kee; Mak, Thomas C W

    2008-01-01

    An English edition of a textbook based on teaching at the final year undergraduate and graduate level. It presents structure and bonding, generalizations of structural trends, crystallographic data, as well as highlights from the recent literature.

  17. Antenna Structure Registrate

    Data.gov (United States)

    Department of Homeland Security — This file is an extract of the Antenna Structure Registrate (ASR). The ASR consists of antenna structures that are more than 60.96 meters (200 feet) in height or...

  18. Structural health monitoring for ship structures

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Charles [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Angel, Marian [Los Alamos National Laboratory; Bement, Matthew [Los Alamos National Laboratory; Salvino, Liming [NSWC, CADEROCK

    2009-01-01

    Currently the Office of Naval Research is supporting the development of structural health monitoring (SHM) technology for U.S. Navy ship structures. This application is particularly challenging because of the physical size of these structures, the widely varying and often extreme operational and environmental conditions associated with these ships missions, lack of data from known damage conditions, limited sensing that was not designed specifically for SHM, and the management of the vast amounts of data that can be collected during a mission. This paper will first define a statistical pattern recognition paradigm for SHM by describing the four steps of (1) Operational Evaluation, (2) Data Acquisition, (3) Feature Extraction, and (4) Statistical Classification of Features as they apply to ship structures. Note that inherent in the last three steps of this process are additional tasks of data cleansing, compression, normalization and fusion. The presentation will discuss ship structure SHM challenges in the context of applying various SHM approaches to sea trials data measured on an aluminum multi-hull high-speed ship, the HSV-2 Swift. To conclude, the paper will discuss several outstanding issues that need to be addressed before SHM can make the transition from a research topic to actual field applications on ship structures and suggest approaches for addressing these issues.

  19. Fundamentals of structural dynamics

    CERN Document Server

    Craig, Roy R

    2006-01-01

    From theory and fundamentals to the latest advances in computational and experimental modal analysis, this is the definitive, updated reference on structural dynamics.This edition updates Professor Craig's classic introduction to structural dynamics, which has been an invaluable resource for practicing engineers and a textbook for undergraduate and graduate courses in vibrations and/or structural dynamics. Along with comprehensive coverage of structural dynamics fundamentals, finite-element-based computational methods, and dynamic testing methods, this Second Edition includes new and e

  20. Synchronously Deployable Truss Structures

    Science.gov (United States)

    Rhodes, M. D.; Hedgepeth, J. M.

    1986-01-01

    Structure lightweight, readily deployed, and has reliable joints. New truss concept, designated as "pac truss," developed. Features easy deployment without need for complex mechanisms. Structures of this type deployed in free flight by controlled release of stored energy in torsional springs at selected hinges located throughout structure. Double-folding technique used in beam model applicable to flat planar trusses, allowing structures of large expanse to fold into compact packages and be deployed for space-platform applications.

  1. Extended icosahedral structures

    CERN Document Server

    Jaric, Marko V

    1989-01-01

    Extended Icosahedral Structures discusses the concepts about crystal structures with extended icosahedral symmetry. This book is organized into six chapters that focus on actual modeling of extended icosahedral crystal structures. This text first presents a tiling approach to the modeling of icosahedral quasiperiodic crystals. It then describes the models for icosahedral alloys based on random connections between icosahedral units, with particular emphasis on diffraction properties. Other chapters examine the glassy structures with only icosahedral orientational order and the extent of tra

  2. HIV Structural Database

    Science.gov (United States)

    SRD 102 HIV Structural Database (Web, free access)   The HIV Protease Structural Database is an archive of experimentally determined 3-D structures of Human Immunodeficiency Virus 1 (HIV-1), Human Immunodeficiency Virus 2 (HIV-2) and Simian Immunodeficiency Virus (SIV) Proteases and their complexes with inhibitors or products of substrate cleavage.

  3. Structural Ceramics Database

    Science.gov (United States)

    SRD 30 NIST Structural Ceramics Database (Web, free access)   The NIST Structural Ceramics Database (WebSCD) provides evaluated materials property data for a wide range of advanced ceramics known variously as structural ceramics, engineering ceramics, and fine ceramics.

  4. Structural safety during construction

    NARCIS (Netherlands)

    Terwel, K.C.; Mud, M.; Frijters, A.

    2014-01-01

    Structural safety during construction is a main concern for the building industry. Collapses of temporary structures or incomplete permanent structures are a threat for the safety of persons. Based on data from Dutch Labour Inspectorate this study concluded that approximately 20% of the fatalities

  5. Programing Structural Synthesis System

    Science.gov (United States)

    Rogers, James L., Jr.

    1986-01-01

    Program aids research in analysis and optimization. Programing Structural Synthesis System (PROSSS2) developed to provide structural-synthesis capability by combining access to SPAR with CONMIN program and set of interface procedures. SPAR is large general-purpose finite-element structural-analysis program, and CONMIN is large general-purpose optimization program. PROSSS2 written in FORTRAN IV for batch execution.

  6. Structural Enhancement of Learning

    Science.gov (United States)

    Trumpower, David L.; Goldsmith, Timothy E.

    2004-01-01

    Structural learning aids, such as interactive overviews (IOs), have previously been shown to facilitate text comprehension and recall. In this study, we examined the effects of structural aids on learners' structural knowledge and their performance on a procedural transfer task. In Experiment 1, 90 college students were presented definitions of…

  7. Neutrality in bipolar structures

    DEFF Research Database (Denmark)

    Montero, Javier; Rodríguez, J. Tinguaro; Franco, Camilo

    2014-01-01

    In this paper, we want to stress that bipolar knowledge representation naturally allows a family of middle states which define as a consequence different kinds of bipolar structures. These bipolar structures are deeply related to the three types of bipolarity introduced by Dubois and Prade, but our...... approach offers a systematic explanation of how such bipolar structures appear and can be identified....

  8. Organizational Knowledge Management Structure

    Science.gov (United States)

    Walczak, Steven

    2005-01-01

    Purpose: To propose and evaluate a novel management structure that encourages knowledge sharing across an organization. Design/methodology/approach: The extant literature on the impact of organizational culture and its link to management structure is examined and used to develop a new knowledge sharing management structure. Roadblocks to…

  9. Hypermedia 1990 structured Hypertext tutorial

    Science.gov (United States)

    Johnson, J. Scott

    1990-01-01

    Hypermedia 1990 structured Hypertext tutorial is presented in the form of view-graphs. The following subject areas are covered: structured hypertext; analyzing hypertext documents for structure; designing structured hypertext documents; creating structured hypertext applications; structuring service and repair documents; maintaining structured hypertext documents; and structured hypertext conclusion.

  10. Ptychographic hyperspectral spectromicroscopy with an extreme ultraviolet high harmonic comb

    CERN Document Server

    Zhang, Bosheng; Seaberg, Matthew H; Shanblatt, Elisabeth R; Porter, Christina L; Karl,, Robert; Mancuso, Christopher A; Kapteyn, Henry C; Murnane, Margaret M; Adams, Daniel E

    2016-01-01

    We demonstrate a new scheme of spectromicroscopy in the extreme ultraviolet (EUV) spectral range, where the spectral response of the sample at different wavelengths is imaged simultaneously. It is enabled by applying ptychographical information multiplexing (PIM) to a tabletop EUV source based on high harmonic generation, where four spectrally narrow harmonics near 30 nm form a spectral comb structure. Extending PIM from previously demonstrated visible wavelengths to the EUV/X-ray wavelengths promises much higher spatial resolution and more powerful spectral contrast mechanism, making PIM an attractive spectromicroscopy method in both the microscopy and the spectroscopy aspects. Besides the sample, the multicolor EUV beam is also imaged in situ, making our method a powerful beam characterization technique. No hardware is used to separate or narrow down the wavelengths, leading to efficient use of the EUV radiation.

  11. Polymer ultrapermeability from the inefficient packing of 2D chains

    Science.gov (United States)

    Rose, Ian; Bezzu, C. Grazia; Carta, Mariolino; Comesaña-Gándara, Bibiana; Lasseuguette, Elsa; Ferrari, M. Chiara; Bernardo, Paola; Clarizia, Gabriele; Fuoco, Alessio; Jansen, Johannes C.; Hart, Kyle E.; Liyana-Arachchi, Thilanga P.; Colina, Coray M.; McKeown, Neil B.

    2017-09-01

    The promise of ultrapermeable polymers, such as poly(trimethylsilylpropyne) (PTMSP), for reducing the size and increasing the efficiency of membranes for gas separations remains unfulfilled due to their poor selectivity. We report an ultrapermeable polymer of intrinsic microporosity (PIM-TMN-Trip) that is substantially more selective than PTMSP. From molecular simulations and experimental measurement we find that the inefficient packing of the two-dimensional (2D) chains of PIM-TMN-Trip generates a high concentration of both small (carbon capture demonstrated for relevant gas mixtures. Comparisons between PIM-TMN-Trip and structurally similar polymers with three-dimensional (3D) contorted chains confirm that its additional intrinsic microporosity is generated from the awkward packing of its 2D polymer chains in a 3D amorphous solid. This strategy of shape-directed packing of chains of microporous polymers may be applied to other rigid polymers for gas separations.

  12. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  13. Shell-like structures

    CERN Document Server

    Altenbach, Holm

    2011-01-01

    In this volume, scientists and researchers from industry discuss the new trends in simulation and computing shell-like structures. The focus is put on the following problems: new theories (based on two-dimensional field equations but describing non-classical effects), new constitutive equations (for materials like sandwiches, foams, etc. and which can be combined with the two-dimensional shell equations), complex structures (folded, branching and/or self intersecting shell structures, etc.) and shell-like structures on different scales (for example: nano-tubes) or very thin structures (similar

  14. Basic structural dynamics

    CERN Document Server

    Anderson, James C

    2012-01-01

    A concise introduction to structural dynamics and earthquake engineering Basic Structural Dynamics serves as a fundamental introduction to the topic of structural dynamics. Covering single and multiple-degree-of-freedom systems while providing an introduction to earthquake engineering, the book keeps the coverage succinct and on topic at a level that is appropriate for undergraduate and graduate students. Through dozens of worked examples based on actual structures, it also introduces readers to MATLAB, a powerful software for solving both simple and complex structural d

  15. Materials and structures

    Science.gov (United States)

    Saito, Theodore T.; Langenbeck, Sharon L.; Al-Jamily, Ghanim; Arnold, Joe; Barbee, Troy; Coulter, Dan; Dolgin, Ben; Fichter, Buck; George, Patricia; Gorenstein, Paul

    1992-08-01

    Materials and structures technology covers a wide range of technical areas. Some of the most pertinent issues for the Astrotech 21 missions include dimensionally stable structural materials, advanced composites, dielectric coatings, optical metallic coatings for low scattered light applications, low scattered light surfaces, deployable and inflatable structures (including optical), support structures in 0-g and 1-g environments, cryogenic optics, optical blacks, contamination hardened surfaces, radiation hardened glasses and crystals, mono-metallic telescopes and instruments, and materials characterization. Some specific examples include low coefficients of thermal expansion (CTE) structures (0.01 ppm/K), lightweight thermally stable mirror materials, thermally stable optical assemblies, high reliability/accuracy (1 micron) deployable structures, and characterization of nanometer level behavior of materials/structures for interferometry concepts. Large filled-aperture concepts will require materials with CTE's of 10(exp 9) at 80 K, anti-contamination coatings, deployable and erectable structures, composite materials with CTE's less than 0.01 ppm/K and thermal hysteresis, 0.001 ppm/K. Gravitational detection systems such as LAGOS will require rigid/deployable structures, dimensionally stable components, lightweight materials with low conductivity, and high stability optics. The Materials and Structures panel addressed these issues and the relevance of the Astrotech 21 mission requirements by dividing materials and structures technology into five categories. These categories, the necessary development, and applicable mission/program development phasing are summarized. For each of these areas, technology assessments were made and development plans were defined.

  16. Exotic cluster structures on

    CERN Document Server

    Gekhtman, M; Vainshtein, A

    2017-01-01

    This is the second paper in the series of papers dedicated to the study of natural cluster structures in the rings of regular functions on simple complex Lie groups and Poisson-Lie structures compatible with these cluster structures. According to our main conjecture, each class in the Belavin-Drinfeld classification of Poisson-Lie structures on \\mathcal{G} corresponds to a cluster structure in \\mathcal{O}(\\mathcal{G}). The authors have shown before that this conjecture holds for any \\mathcal{G} in the case of the standard Poisson-Lie structure and for all Belavin-Drinfeld classes in SL_n, n<5. In this paper the authors establish it for the Cremmer-Gervais Poisson-Lie structure on SL_n, which is the least similar to the standard one.

  17. Structural realism beyond physics.

    Science.gov (United States)

    Tulodziecki, Dana

    2016-10-01

    The main purpose of this paper is to test structural realism against (one example from) the historical record. I begin by laying out an existing challenge to structural realism - that of providing an example of a theory exhibiting successful structures that were abandoned - and show that this challenge can be met by the miasma theory of disease. However, rather than concluding that this is an outright counterexample to structural realism, I use this case to show why it is that structural realism, in its current form, has trouble dealing with theories outside physics. I end by making some concrete suggestions for structural realists to pursue if, indeed, they are serious about extending structural realism to other domains.

  18. Reducts of Ramsey structures

    CERN Document Server

    Bodirsky, Manuel

    2011-01-01

    One way of studying a relational structure is to investigate functions which are related to that structure and which leave certain aspects of the structure invariant. Examples are the automorphism group, the self-embedding monoid, the endomorphism monoid, or the polymorphism clone of a structure. Such functions can be particularly well understood when the relational structure is countably infinite and has a first-order definition in another relational structure which has a finite language, is totally ordered and homogeneous, and has the Ramsey property. This is because in this situation, Ramsey theory provides the combinatorial tool for analyzing these functions -- in a certain sense, it allows to represent such functions by functions on finite sets. This is a survey of results in model theory and theoretical computer science obtained recently by the authors in this context. In model theory, we approach the problem of classifying the reducts of countably infinite ordered homogeneous Ramsey structures in a fin...

  19. Impact of Participatory Irrigation Management (PIM) to Local Communities and Environment in Hop Tien Commune, Dong Hy

    NARCIS (Netherlands)

    Wageningen International,

    2008-01-01

    This case-study is designed to support the development of the Viet Nam – Netherlands Water Partnership on Water for Food and Ecosystems. The partnership is between Viet Nam’s Ministry of Agriculture and Rural Development (MARD) and the Netherlands Ministry of Agriculture, Nature and Food Quality

  20. The Mechanism of Action of Unique Small Molecules that Inhibit the Pim Protein Kinase Blocking Prostate Cancer Cell Growth

    Science.gov (United States)

    2010-05-01

    purified from insect cells (39) andmixedwith in vitro-translated 35S-labeled p27 that had previously been incubatedwith cyclin E/Cdk2 alongwithmeth...phosphorylation, mTORC1 activity, 5′-cap-dependent translation, and ultimately cell growth (Fig. 5C). Discussion The combined approach of genetic knockout, RNAi

  1. Therapeutic Value of PLK1 Knockdown in Combination with Prostate Cancer Drugs in PIM-1 Overexpressing Prostate Cancer Cells

    Science.gov (United States)

    2014-11-13

    cells. PLoS ONE 3, e2572. Roh, M., Gary, B., Song, C., Said-Al-Naief, N., Tousson, A., Kraft , A., Eltoum, I. E., and Abdulkadir, S. A. (2003...likely due to saturation effects of BI 2536 in higher dose. In addition to the increased p-HH3, the apoptotic marker PARP, another characteristic of...biomolecular screening. 2004;9:286-93. 23. Roh M, Gary B, Song C, Said-Al-Naief N, Tousson A, Kraft A, et al. Overexpression of the oncogenic kinase

  2. Determination of deposited flux and energy of sputtered tungsten atoms on every stages of transport in HiPIMS discharge

    Science.gov (United States)

    Desecures, M.; de Poucques, L.; Bougdira, J.

    2017-02-01

    A time-resolved tunable diode-laser (DL) induced fluorescence (TR-TDLIF) technique has been used to identify different populations of atoms (on different stages of transport) to determine their corresponding deposited energy and flux. The temporal dimension permits the splitting of the processes of sputtering during the discharge and particles transport in the post-discharge where atoms and flux velocity distribution functions (AVDF, FVDF) of each population were measured varying the discharge parameters (power, voltage, pressure, and distance from target). Tungsten (W) was chosen, being an interesting case in terms of sputtered atom transport, considering its weight which implies weak changes of directivity or energy transfer after collisions with the buffer gas. The high temporal and spectral resolutions of TR-TDLIF are the keys for the distinction of the atoms populations and the stage corresponding to the transition from the ballistic to diffusive regime of transport was observed for the first time and named quasi-diffusive regime. Thus, the ability to dissociate populations of atoms and to determine their deposited flux and energy may be of great interest to adjust film properties as desired for applications.

  3. Micro powder injection molding——large scale production technology for micro-sized components

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Micro powder injection molding (μPIM),a miniaturized variant of powder injection molding,has advantages of shape complexity,applicability to many materials and good mechanical properties. Co-injection molding has been realized between met-als and ceramics on micro components,which become the first breakthrough within the PIM field. Combined with the prominent characteristics of high features/cost ratio,micro powder injection molding becomes a potential technique for large scale production of intricate and three-dimensional micro components or micro-structured components in microsystems technology (MST) field.

  4. Robustness of Structures

    DEFF Research Database (Denmark)

    Faber, M.H.; Vrouwenvelder, A.C.W.M.; Sørensen, John Dalsgaard

    2011-01-01

    In 2005, the Joint Committee on Structural Safety (JCSS) together with Working Commission (WC) 1 of the International Association of Bridge and Structural Engineering (IABSE) organized a workshop on robustness of structures. Two important decisions resulted from this workshop, namely the developm......In 2005, the Joint Committee on Structural Safety (JCSS) together with Working Commission (WC) 1 of the International Association of Bridge and Structural Engineering (IABSE) organized a workshop on robustness of structures. Two important decisions resulted from this workshop, namely...... the development of a joint European project on structural robustness under the COST (European Cooperation in Science and Technology) programme and the decision to develop a more elaborate document on structural robustness in collaboration between experts from the JCSS and the IABSE. Accordingly, a project titled...... ‘COST TU0601: Robustness of Structures’ was initiated in February 2007, aiming to provide a platform for exchanging and promoting research in the area of structural robustness and to provide a basic framework, together with methods, strategies and guidelines enhancing robustness of structures...

  5. Development of a PSA information management system

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Seok; Dong Kyu, Kim; Sun Koo, Kang [Korea Power Engineering Company, Inc (Korea, Republic of)

    2007-07-01

    In general, Probabilistic Safety Agreement (PSA) is a very complicated work that uses and generates a lot of resources such as reports, procedures, drawings, assumptions, calculation sheets, PSA model, and so on. In many PSAs, however, the data, materials and knowledge considered and generated during performing PSA are scattered in many documents so that overall structure of PSA and information relationship between documents and models cannot easily be understood. To organize and manage all documents related to PSA, to capture knowledge of analysts, and finally to improve the quality of PSA, a PSA information management system (PIMS) was developed. The PIMS can manage all the documents of a PSA in a database and connect the causal relation between one information to another in the scattered documents via link. The PIMS can manage all the assumptions and technical basis used in PSA, and it can keep the record of the design changes the revision of PSA model. It can also control the review results of PSA models. The link of the PIMS can explicitly describe and reveal the expertise of the PSA analysts, and it enables the users to capture the knowledge and to understand the structure and contents of a PSA with ease. We are planning to apply the PIMS to the PSA of Shin Kori Units 1 and 2 as feasibility study and then to all the PSAs of the nuclear power plants in Korea. The PIMS is expected to contribute to enhancing the quality and confidence of PSA and reducing the efforts and costs of maintenance and update of PSA. (authors)

  6. Structure - Riverine Flow Structure (Dike/Wingdam)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — A natural or man-made flow (or sediment) control structure in a water course or water body such as a dike or weir. This feature should not be used to model a levee....

  7. Exponential Dowling structures

    CERN Document Server

    Ehrenborg, Richard

    2010-01-01

    The notion of exponential Dowling structures is introduced, generalizing Stanley's original theory of exponential structures. Enumerative theory is developed to determine the M\\"obius function of exponential Dowling structures, including a restriction of these structures to elements whose types satisfy a semigroup condition. Stanley's study of permutations associated with exponential structures leads to a similar vein of study for exponential Dowling structures. In particular, for the extended r-divisible partition lattice we show the M\\"obius function is, up to a sign, the number of permutations in the symmetric group on rn+k elements having descent set {r, 2r, ..., nr}. Using Wachs' original EL-labeling of the r-divisible partition lattice, the extended r-divisible partition lattice is shown to be EL-shellable.

  8. Origami - Folded Plate Structures

    OpenAIRE

    Buri, Hans Ulrich

    2010-01-01

    This research investigates new methods of designing folded plate structures that can be built with cross-laminated timber panels. Folded plate structures are attractive to both architects and engineers for their structural, spatial, and plastic qualities. Thin surfaces can be stiffened by a series of folds, and thus not only cover space, but also act as load bearing elements. The variation of light and shadow along the folded faces emphasizes the plas...

  9. Catalytic distillation structure

    Science.gov (United States)

    Smith, L.A. Jr.

    1984-04-17

    Catalytic distillation structure is described for use in reaction distillation columns, and provides reaction sites and distillation structure consisting of a catalyst component and a resilient component intimately associated therewith. The resilient component has at least about 70 volume % open space and is present with the catalyst component in an amount such that the catalytic distillation structure consists of at least 10 volume % open space. 10 figs.

  10. Advance in structural bioinformatics

    CERN Document Server

    Wei, Dongqing; Zhao, Tangzhen; Dai, Hao

    2014-01-01

    This text examines in detail mathematical and physical modeling, computational methods and systems for obtaining and analyzing biological structures, using pioneering research cases as examples. As such, it emphasizes programming and problem-solving skills. It provides information on structure bioinformatics at various levels, with individual chapters covering introductory to advanced aspects, from fundamental methods and guidelines on acquiring and analyzing genomics and proteomics sequences, the structures of protein, DNA and RNA, to the basics of physical simulations and methods for conform

  11. Structure of Human Adenovirus

    OpenAIRE

    Nemerow, Glen R.; Phoebe L Stewart; Reddy, Vijay S.

    2012-01-01

    A detailed structural analysis of the entire human adenovirus capsid has been stymied by the complexity and size of this 150 MDa macromolecular complex. Over the past 10 years, the steady improvements in viral genome manipulation concomitant with advances in crystallographic techniques and data processing software has allowed structure determination of this virus by X-ray diffraction at 3.5 Å resolution. The virus structure revealed the location, folds, and interactions of major and minor (ce...

  12. Reforming Organizational Structures

    OpenAIRE

    Van de Walle, Steven

    2016-01-01

    textabstractPublic sectors have undergone major transformations. Public sector reform touches upon the core building blocks of the public sector: organizational structures, people and finances. These are objects of reform. This chapter presents and discusses a set of major transformations with regard to organizational structures. It provides readers a fairly comprehensive overview of the key reforms that have taken place in Western public sectors. Structural reforms in the public sector show ...

  13. Auxetic materials and structures

    CERN Document Server

    Lim, Teik-Cheng

    2015-01-01

    This book describes the fundamentals of the mechanics and design of auxetic solids and structures, which possess a negative Poisson’s ratio. It will benefit two groups of readers: (a) industry practitioners, such as product and structural designers, who need to control mechanical stress distributions using auxetic materials, and (b) academic researchers and students who intend to produce structures with unique mechanical and other physical properties using auxetic materials.

  14. Structural elements design manual

    CERN Document Server

    Draycott, Trevor

    2012-01-01

    Gives clear explanations of the logical design sequence for structural elements. The Structural Engineer says: `The book explains, in simple terms, and with many examples, Code of Practice methods for sizing structural sections in timber, concrete,masonry and steel. It is the combination into one book of section sizing methods in each of these materials that makes this text so useful....Students will find this an essential support text to the Codes of Practice in their study of element sizing'.

  15. Organisational structure of Enterprise

    OpenAIRE

    Varenytsya, Maryan

    2015-01-01

    The purpose of the bachelor final work is to identify effective organizational management structure, as well offer advice company branch of JSC "Rostelecom" for the improvement of organizational structure of management. It examines the relevance of the study, defined goals, objectives and methods of research, a review of the literature. This thesis contains information on the main causes of changes in the organizational structure of the enterprise management, the design of the organizational ...

  16. Valency and molecular structure

    CERN Document Server

    Cartmell, E

    1977-01-01

    Valency and Molecular Structure, Fourth Edition provides a comprehensive historical background and experimental foundations of theories and methods relating to valency and molecular structures. In this edition, the chapter on Bohr theory has been removed while some sections, such as structures of crystalline solids, have been expanded. Details of structures have also been revised and extended using the best available values for bond lengths and bond angles. Recent developments are mostly noted in the chapter on complex compounds, while a new chapter has been added to serve as an introduction t

  17. Linguistic Structure Prediction

    CERN Document Server

    Smith, Noah A

    2011-01-01

    A major part of natural language processing now depends on the use of text data to build linguistic analyzers. We consider statistical, computational approaches to modeling linguistic structure. We seek to unify across many approaches and many kinds of linguistic structures. Assuming a basic understanding of natural language processing and/or machine learning, we seek to bridge the gap between the two fields. Approaches to decoding (i.e., carrying out linguistic structure prediction) and supervised and unsupervised learning of models that predict discrete structures as outputs are the focus. W

  18. Structural Precast Concrete Handbook

    DEFF Research Database (Denmark)

    Kjærbye, Per Oluf H

    Structural concept for precast concrete systems. Design og precast reinforced concrete components. Design of precast concrete connections. Illustrations on design of precast concrete buildings. Precast concrete assembly....

  19. Structural Dynamics Laboratory (SDL)

    Data.gov (United States)

    Federal Laboratory Consortium — Structural dynamic testing is performed to verify the survivability of a component or assembly when exposed to vibration stress screening, or a controlled simulation...

  20. Machine tool structures

    CERN Document Server

    Koenigsberger, F

    1970-01-01

    Machine Tool Structures, Volume 1 deals with fundamental theories and calculation methods for machine tool structures. Experimental investigations into stiffness are discussed, along with the application of the results to the design of machine tool structures. Topics covered range from static and dynamic stiffness to chatter in metal cutting, stability in machine tools, and deformations of machine tool structures. This volume is divided into three sections and opens with a discussion on stiffness specifications and the effect of stiffness on the behavior of the machine under forced vibration c

  1. Flexible Volumetric Structure

    Science.gov (United States)

    Cagle, Christopher M. (Inventor); Schlecht, Robin W. (Inventor)

    2014-01-01

    A flexible volumetric structure has a first spring that defines a three-dimensional volume and includes a serpentine structure elongatable and compressible along a length thereof. A second spring is coupled to at least one outboard edge region of the first spring. The second spring is a sheet-like structure capable of elongation along an in-plane dimension thereof. The second spring is oriented such that its in-plane dimension is aligned with the length of the first spring's serpentine structure.

  2. Laboratory for Structural Acoustics

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports experimental research where acoustic radiation, scattering, and surface vibration measurements of fluid-loaded and non-fluid-loaded structures are...

  3. Deployable Soft Composite Structures

    Science.gov (United States)

    Wang, Wei; Rodrigue, Hugo; Ahn, Sung-Hoon

    2016-02-01

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and simple to actuate. This basic actuator can then be used to form modules capable of different types of deformations, which can then be assembled into deployable structures. The design of deployable structures is based on three principles: design of basic hinge actuators, assembly of modules and assembly of modules into large-scale deployable structures. Various deployable structures such as a segmented triangular mast, a planar structure comprised of single-loop hexagonal modules and a ring structure comprised of single-loop quadrilateral modules were designed and fabricated to verify this approach. Finally, a prototype for a deployable mirror was developed by attaching a foldable reflective membrane to the designed ring structure and its functionality was tested by using it to reflect sunlight onto to a small-scale solar panel.

  4. Deployable Soft Composite Structures.

    Science.gov (United States)

    Wang, Wei; Rodrigue, Hugo; Ahn, Sung-Hoon

    2016-02-19

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and simple to actuate. This basic actuator can then be used to form modules capable of different types of deformations, which can then be assembled into deployable structures. The design of deployable structures is based on three principles: design of basic hinge actuators, assembly of modules and assembly of modules into large-scale deployable structures. Various deployable structures such as a segmented triangular mast, a planar structure comprised of single-loop hexagonal modules and a ring structure comprised of single-loop quadrilateral modules were designed and fabricated to verify this approach. Finally, a prototype for a deployable mirror was developed by attaching a foldable reflective membrane to the designed ring structure and its functionality was tested by using it to reflect sunlight onto to a small-scale solar panel.

  5. Bioinspired structural materials

    Science.gov (United States)

    Wegst, Ulrike G. K.; Bai, Hao; Saiz, Eduardo; Tomsia, Antoni P.; Ritchie, Robert O.

    2015-01-01

    Natural structural materials are built at ambient temperature from a fairly limited selection of components. They usually comprise hard and soft phases arranged in complex hierarchical architectures, with characteristic dimensions spanning from the nanoscale to the macroscale. The resulting materials are lightweight and often display unique combinations of strength and toughness, but have proven difficult to mimic synthetically. Here, we review the common design motifs of a range of natural structural materials, and discuss the difficulties associated with the design and fabrication of synthetic structures that mimic the structural and mechanical characteristics of their natural counterparts.

  6. Nuclear structure theory

    CERN Document Server

    Irvine, J M

    1972-01-01

    Nuclear Structure Theory provides a guide to nuclear structure theory. The book is comprised of 23 chapters that are organized into four parts; each part covers an aspect of nuclear structure theory. In the first part, the text discusses the experimentally observed phenomena, which nuclear structure theories need to look into and detail the information that supports those theories. The second part of the book deals with the phenomenological nucleon-nucleon potentials derived from phase shift analysis of nucleon-nucleon scattering. Part III talks about the phenomenological parameters used to de

  7. Roadmap on structured light

    Science.gov (United States)

    Rubinsztein-Dunlop, Halina; Forbes, Andrew; Berry, M. V.; Dennis, M. R.; Andrews, David L.; Mansuripur, Masud; Denz, Cornelia; Alpmann, Christina; Banzer, Peter; Bauer, Thomas; Karimi, Ebrahim; Marrucci, Lorenzo; Padgett, Miles; Ritsch-Marte, Monika; Litchinitser, Natalia M.; Bigelow, Nicholas P.; Rosales-Guzmán, C.; Belmonte, A.; Torres, J. P.; Neely, Tyler W.; Baker, Mark; Gordon, Reuven; Stilgoe, Alexander B.; Romero, Jacquiline; White, Andrew G.; Fickler, Robert; Willner, Alan E.; Xie, Guodong; McMorran, Benjamin; Weiner, Andrew M.

    2017-01-01

    Structured light refers to the generation and application of custom light fields. As the tools and technology to create and detect structured light have evolved, steadily the applications have begun to emerge. This roadmap touches on the key fields within structured light from the perspective of experts in those areas, providing insight into the current state and the challenges their respective fields face. Collectively the roadmap outlines the venerable nature of structured light research and the exciting prospects for the future that are yet to be realized.

  8. Probabilistic conditional independence structures

    CERN Document Server

    Studeny, Milan

    2005-01-01

    Probabilistic Conditional Independence Structures provides the mathematical description of probabilistic conditional independence structures; the author uses non-graphical methods of their description, and takes an algebraic approach.The monograph presents the methods of structural imsets and supermodular functions, and deals with independence implication and equivalence of structural imsets.Motivation, mathematical foundations and areas of application are included, and a rough overview of graphical methods is also given.In particular, the author has been careful to use suitable terminology, and presents the work so that it will be understood by both statisticians, and by researchers in artificial intelligence.The necessary elementary mathematical notions are recalled in an appendix.

  9. Structural patterns in nature

    DEFF Research Database (Denmark)

    Wester, Ture

    2004-01-01

    It seems that some very basic randomly produced geometric/topological patterns are commonly found in Nature and have often very distinctive structural qualities. In nature we find the same pattern in all scales from the universe to molecules, from solar systems to packing of cells, from glaciers...... to sea shells, from river systems to trees etc. Sometimes this seeming archetypical morphology involve structural action and sometimes not - but the fact that it often posses efficient structural action opens a tool for evaluation and analyses of structures in nature and at the same time might...

  10. Stable umbral chromospheric structures

    Science.gov (United States)

    Henriques, V. M. J.; Scullion, E.; Mathioudakis, M.; Kiselman, D.; Gallagher, P. T.; Keenan, F. P.

    2015-02-01

    Aims: We seek to understand the morphology of the chromosphere in sunspot umbra. We investigate if the horizontal structures observed in the spectral core of the Ca II H line are ephemeral visuals caused by the shock dynamics of more stable structures, and examine their relationship with observables in the H-alpha line. Methods: Filtergrams in the core of the Ca II H and H-alpha lines as observed with the Swedish 1-m Solar Telescope are employed. We utilise a technique that creates composite images and tracks the flash propagation horizontally. Results: We find 0.̋15 wide horizontal structures, in all of the three target sunspots, for every flash where the seeing is moderate to good. Discrete dark structures are identified that are stable for at least two umbral flashes, as well as systems of structures that live for up to 24 min. We find cases of extremely extended structures with similar stability, with one such structure showing an extent of 5''. Some of these structures have a correspondence in H-alpha, but we were unable to find a one-to-one correspondence for every occurrence. If the dark streaks are formed at the same heights as umbral flashes, there are systems of structures with strong departures from the vertical for all three analysed sunspots. Conclusions: Long-lived Ca II H filamentary horizontal structures are a common and likely ever-present feature in the umbra of sunspots. If the magnetic field in the chromosphere of the umbra is indeed aligned with the structures, then the present theoretical understanding of the typical umbra needs to be revisited. Movies associated to Figs. 3 and 4 are available in electronic form at http://www.aanda.org

  11. Organisational Structure & Change

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2006

    2006-01-01

    Structural change is seen as a way to meet the challenges of the future that face many organisations. While some writers agree that broad-ranging structural change may not always transform an organisation or enhance its performance, others claim that innovation will be a major source of competitive advantage to organisations, particularly when…

  12. The Structure of Reciprocity

    Science.gov (United States)

    Molm, Linda D.

    2010-01-01

    Reciprocity is one of the defining features of social exchange and social life, yet exchange theorists have tended to take it for granted. Drawing on work from a decade-long theoretical research program, I argue that reciprocity is structured and variable across different forms of exchange, that these variations in the structure of reciprocity…

  13. Tapered structure construction

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Eric D.; Takata, Rosalind K.; Slocum, Alexander H.; Nayfeh, Samir A.

    2016-04-05

    Feeding stock used to form a tapered structure into a curving device such that each point on the stock undergoes rotational motion about a peak location of the tapered structure; and the stock meets a predecessor portion of stock along one or more adjacent edges.

  14. Wave scour around structures

    DEFF Research Database (Denmark)

    Sumer, B. Mutlu; Fredsøe, Jørgen

    1999-01-01

    This review (of scour around marine structures) is organized in seven main sections: Basic concepts; Tunnel erosion; Two- and three-dimensional scour around pipelines; Scour around piles (slender bodies), including pile groups; Scour around complex structures; Scour around large, vertical cylinde......; and Scour around breakwaters (vertical-wall breakwaters and rubble-mound breakwaters)....

  15. Neutrinos and nucleon structure

    CERN Document Server

    Sehgal, L M

    1979-01-01

    The study of neutrino interactions in matter is yielding a wealth of information on the form factors and structure functions of the nucleon. These data allow tests of models of nucleon structure and of dynamical theories of quarks and gluons. The author attempts a critical appraisal of recent facts and their impact on our theoretical understanding. (35 refs).

  16. The Cambridge Structural Database.

    Science.gov (United States)

    Groom, Colin R; Bruno, Ian J; Lightfoot, Matthew P; Ward, Suzanna C

    2016-04-01

    The Cambridge Structural Database (CSD) contains a complete record of all published organic and metal-organic small-molecule crystal structures. The database has been in operation for over 50 years and continues to be the primary means of sharing structural chemistry data and knowledge across disciplines. As well as structures that are made public to support scientific articles, it includes many structures published directly as CSD Communications. All structures are processed both computationally and by expert structural chemistry editors prior to entering the database. A key component of this processing is the reliable association of the chemical identity of the structure studied with the experimental data. This important step helps ensure that data is widely discoverable and readily reusable. Content is further enriched through selective inclusion of additional experimental data. Entries are available to anyone through free CSD community web services. Linking services developed and maintained by the CCDC, combined with the use of standard identifiers, facilitate discovery from other resources. Data can also be accessed through CCDC and third party software applications and through an application programming interface.

  17. Periodic truss structures

    Science.gov (United States)

    Zok, Frank W.; Latture, Ryan M.; Begley, Matthew R.

    2016-11-01

    Despite the recognition of the enormous potential of periodic trusses for use in a broad range of technologies, there are no widely-accepted descriptors of their structure. The terminology has been based loosely either on geometry of polyhedra or of point lattices: neither of which, on its own, has an appropriate structure to fully define periodic trusses. The present article lays out a system for classification of truss structure types. The system employs concepts from crystallography and geometry to describe nodal locations and connectivity of struts. Through a series of illustrative examples of progressively increasing complexity, a rational taxonomy of truss structure is developed. Its conceptual evolution begins with elementary cubic trusses, increasing in complexity with non-cubic and compound trusses as well as supertrusses, and, finally, with complex trusses. The conventions and terminology adopted to define truss structure yield concise yet unambiguous descriptions of structure types and of specific (finite) trusses. The utility of the taxonomy is demonstrated by bringing into alignment a disparate set of ad hoc and incomplete truss designations previously employed in a broad range of science and engineering fields. Additionally, the merits of a particular compound truss (comprising two interpenetrating elementary trusses) is shown to be superior to the octet truss for applications requiring high stiffness and elastic isotropy. By systematically stepping through and analyzing the finite number of structure types identified through the present classification system, optimal structures for prescribed mechanical and functional requirements are expected to be ascertained in an expeditious manner.

  18. Structures of Mn clusters

    Indian Academy of Sciences (India)

    Tina M Briere; Marcel H F Sluiter; Vijay Kumar; Yoshiyuki Kawazoe

    2003-01-01

    The geometries of several Mn clusters in the size range Mn13–Mn23 are studied via the generalized gradient approximation to density functional theory. For the 13- and 19-atom clusters, the icosahedral structures are found to be most stable, while for the 15-atom cluster, the bcc structure is more favoured. The clusters show ferrimagnetic spin configurations.

  19. Lightweight Composite Intertank Structure

    Science.gov (United States)

    Mehle, Greg V.

    1995-01-01

    Report presents results of study for proposed lightweight composite material alternative to present semimonocoque aluminum intertank structure for advanced launch vehicles. Proposed structure integrated assembly of sandwich panels made of laminated epoxy-matrix/carbon-fiber skins, and aluminum honeycomb core.

  20. Structural Precast Concrete Handbook

    DEFF Research Database (Denmark)

    Kjærbye, Per Oluf H

    Structural concept for precast concrete systems. Design og precast reinforced concrete components. Design of precast concrete connections. Illustrations on design of precast concrete buildings. Precast concrete assembly.......Structural concept for precast concrete systems. Design og precast reinforced concrete components. Design of precast concrete connections. Illustrations on design of precast concrete buildings. Precast concrete assembly....

  1. Magnetic Nano-structures

    Institute of Scientific and Technical Information of China (English)

    姚永德

    2004-01-01

    Fabrication of magnetic nano-structures with dots array and wires has been paid attention recently due to the application of high-density magnetic recording. In this study, we fabricated the magnetic dots array and wires through several ways that ensure the arrangement of magnetic dots and wires to be the structures we designed. Their magnetic properties are studied experimentally.

  2. Hierarchical Porous Structures

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-07

    Materials Design is often at the forefront of technological innovation. While there has always been a push to generate increasingly low density materials, such as aero or hydrogels, more recently the idea of bicontinuous structures has gone more into play. This review will cover some of the methods and applications for generating both porous, and hierarchically porous structures.

  3. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.H.H.; Soetens, F.

    2006-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical pr

  4. Solution structure of (+)-discodermolide.

    Science.gov (United States)

    Smith, A B; LaMarche, M J; Falcone-Hindley, M

    2001-03-01

    [structure: see text]. The solution structure of (+)-discodermolide (1) has been determined via 1- and 2-D NMR techniques in conjunction with Monte Carlo conformational analysis. Taken together, the results demonstrate that in solution (+)-discodermolide occupies a helical conformation remarkably similar to the solid state conformation.

  5. Hedging structured concepts

    NARCIS (Netherlands)

    Koolen, W.M.; Warmuth, M.K.; Kivinen, J.; Kalai, A.T.; Mohri, M.

    2010-01-01

    We develop an online algorithm called Component Hedge for learning structured concept classes when the loss of a structured concept sums over its components. Example classes include paths through a graph (composed of edges) and partial permutations (composed of assignments). The algorithm maintains

  6. Describing migration spatial structure

    NARCIS (Netherlands)

    Rogers, A; Willekens, F; Little, J; Raymer, J

    The age structure of a population is a fundamental concept in demography and is generally depicted in the form of an age pyramid. The spatial structure of an interregional system of origin-destination-specific migration streams is, however, a notion lacking a widely accepted definition. We offer a

  7. Structure sensitivity in adsorption

    DEFF Research Database (Denmark)

    Hammer, Bjørk; Nielsen, Ole Holm; Nørskov, Jens Kehlet

    1997-01-01

    The structure sensitivity of CO adsorption on different flat, stepped, kinked and reconstructed Pt surfaces is studied using large-scale density-functional calculations. We find an extremely strong structure sensitivity in the adsorption energy with variations up to 1 eV (or 100%) from one...

  8. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first par

  9. Wave scour around structures

    DEFF Research Database (Denmark)

    Sumer, B. Mutlu; Fredsøe, Jørgen

    1999-01-01

    This review (of scour around marine structures) is organized in seven main sections: Basic concepts; Tunnel erosion; Two- and three-dimensional scour around pipelines; Scour around piles (slender bodies), including pile groups; Scour around complex structures; Scour around large, vertical cylinders......; and Scour around breakwaters (vertical-wall breakwaters and rubble-mound breakwaters)....

  10. Piaget's Structural Developmental Psychology.

    Science.gov (United States)

    Broughton, John M.

    1981-01-01

    Piaget's theory is identified as a branch of structuralism concerned with the concept of truth, in distinction from French structuralism, which is focused on meaning. The two branches are compared and contrasted, and relations between logic and language are explored. Similarities and differences in the theories of Piaget, Levi-Strauss, and Chomsky…

  11. Robustness of structures

    DEFF Research Database (Denmark)

    Vrouwenvelder, T.; Sørensen, John Dalsgaard

    2009-01-01

    robustness is still an issue of controversy and poses difficulties in regard to interpretation as well as regulation. Typically modern structural design codes require that ‘the consequence of damages to structures should not be disproportional to the causes of the damages'. However, despite the importance...

  12. Structural Crashworthiness and Failure

    Science.gov (United States)

    1993-04-16

    structures en materiaux composite. VDI-Bericht Nr 369, 1980. 46. Kirsch, P. A. & Jahnle, H. A., Energy absorption of glass-polyester structures. SAE...materials in the automotive industry. They built two cabins, one equipped with front and rear suspension , steering assembly, rear engine, seats, outer skin

  13. Generalized holomorphic structures

    Science.gov (United States)

    Wang, Yicao

    2014-12-01

    We define the notion of generalized holomorphic principal bundles and establish that their associated vector bundles of holomorphic representations are generalized holomorphic vector bundles defined by M. Gualtieri. Motivated by our definition, several examples of generalized holomorphic structures are constructed. A reduction theorem of generalized holomorphic structures is also included.

  14. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first par

  15. Shipping Industry Structure

    NARCIS (Netherlands)

    Wijnolst, N.; Waals, F.

    1999-01-01

    Understanding Shipping Management requires a thorough understanding of the Shipping Industry Structure. This book provides this knowledge base and should be seen in conjunction with two other books: Shipping and Design Innovation in Shipping. Shipping Industry Structure was intended as the first

  16. Dynamic term structure models

    DEFF Research Database (Denmark)

    Andreasen, Martin Møller; Meldrum, Andrew

    This paper studies whether dynamic term structure models for US nominal bond yields should enforce the zero lower bound by a quadratic policy rate or a shadow rate specification. We address the question by estimating quadratic term structure models (QTSMs) and shadow rate models with at most four...

  17. Buckling of Ship Structures

    CERN Document Server

    Shama, Mohamed

    2013-01-01

    Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.  The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structur...

  18. Product Structuring, an overview

    DEFF Research Database (Denmark)

    Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup;

    1997-01-01

    This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

  19. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.H.H.; Soetens, F.

    2006-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical

  20. Describing migration spatial structure

    NARCIS (Netherlands)

    Rogers, A; Willekens, F; Little, J; Raymer, J

    2002-01-01

    The age structure of a population is a fundamental concept in demography and is generally depicted in the form of an age pyramid. The spatial structure of an interregional system of origin-destination-specific migration streams is, however, a notion lacking a widely accepted definition. We offer a d

  1. Cosmic structure formation

    Science.gov (United States)

    Bertschinger, Edumund

    1994-01-01

    This article reviews the prevailing paradigm for how galaxies and larger structures formed in the universe: gravitational instability. Basic observational facts are summarized to motivate the standard cosmological framework underlying most detailed investigations of structure formation. The observed univers approaches spatial uniformity on scales larger than about 10(exp 26) cm. On these scales gravitational dynamics is almost linear and therefore relatively easy to relate to observations of large-scale structure. On smaller scales cosmic structure is complicated not only by nonlinear gravitational clustering but also by nonlinear nongravitational gas dynamical processes. The complexity of these phenomena makes galaxy formation one of the grand challenge problems of the physical sciences. No fully satisfactory theory can presently account in detail for the observed cosmic structure. However, as this article summarizes, significant progress has been made during the last few years.

  2. Iconicity as structure mapping.

    Science.gov (United States)

    Emmorey, Karen

    2014-09-19

    Linguistic and psycholinguistic evidence is presented to support the use of structure-mapping theory as a framework for understanding effects of iconicity on sign language grammar and processing. The existence of structured mappings between phonological form and semantic mental representations has been shown to explain the nature of metaphor and pronominal anaphora in sign languages. With respect to processing, it is argued that psycholinguistic effects of iconicity may only be observed when the task specifically taps into such structured mappings. In addition, language acquisition effects may only be observed when the relevant cognitive abilities are in place (e.g. the ability to make structural comparisons) and when the relevant conceptual knowledge has been acquired (i.e. information key to processing the iconic mapping). Finally, it is suggested that iconicity is better understood as a structured mapping between two mental representations than as a link between linguistic form and human experience.

  3. Nonlinear dynamics of structures

    CERN Document Server

    Oller, Sergio

    2014-01-01

    This book lays the foundation of knowledge that will allow a better understanding of nonlinear phenomena that occur in structural dynamics.   This work is intended for graduate engineering students who want to expand their knowledge on the dynamic behavior of structures, specifically in the nonlinear field, by presenting the basis of dynamic balance in non‐linear behavior structures due to the material and kinematics mechanical effects.   Particularly, this publication shows the solution of the equation of dynamic equilibrium for structure with nonlinear time‐independent materials (plasticity, damage and frequencies evolution), as well as those time dependent non‐linear behavior materials (viscoelasticity and viscoplasticity). The convergence conditions for the non‐linear dynamic structure solution  are studied, and the theoretical concepts and its programming algorithms are presented.  

  4. Regularized Structural Equation Modeling.

    Science.gov (United States)

    Jacobucci, Ross; Grimm, Kevin J; McArdle, John J

    A new method is proposed that extends the use of regularization in both lasso and ridge regression to structural equation models. The method is termed regularized structural equation modeling (RegSEM). RegSEM penalizes specific parameters in structural equation models, with the goal of creating easier to understand and simpler models. Although regularization has gained wide adoption in regression, very little has transferred to models with latent variables. By adding penalties to specific parameters in a structural equation model, researchers have a high level of flexibility in reducing model complexity, overcoming poor fitting models, and the creation of models that are more likely to generalize to new samples. The proposed method was evaluated through a simulation study, two illustrative examples involving a measurement model, and one empirical example involving the structural part of the model to demonstrate RegSEM's utility.

  5. Socio-Technical Structure

    DEFF Research Database (Denmark)

    Rose, Jeremy; Lindgren, Rikard; Henfridsson, Ole

    2004-01-01

    a reference discipline in its own right (in other words a theory exporter), this paper offers an example of integrative theory development. Instead of adapting a theory from another discipline or building a theory from empirical data, we examine the structure concept in some of its various theoretical...... adaptations in IS and try to integrate them to produce theory that focuses on IS concerns whilst resolving some of the major areas of contention. Both social and technological versions of structure are investigated through three theoretical IS perspectives drawn from different reference disciplines. The first...... perspective relates to social theories (principally structuration theory), the second to linguistic theories (principally the structural linguistics of Chomsky), and the last to science studies (principally actor-network theory). The objective is to study areas of agreement and contention around the structure...

  6. Optoelectronic Mounting Structure

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Baca, Johnny R. F. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Chu, Dahwey (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Peterson, David W. (Sandia Park, NM); Peterson, Gary D. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM); Reysen, Bill H. (Lafayette, CO)

    2004-10-05

    An optoelectronic mounting structure is provided that may be used in conjunction with an optical transmitter, receiver or transceiver module. The mounting structure may be a flexible printed circuit board. Thermal vias or heat pipes in the head region may transmit heat from the mounting structure to the heat spreader. The heat spreader may provide mechanical rigidity or stiffness to the heat region. In another embodiment, an electrical contact and ground plane may pass along a surface of the head region so as to provide an electrical contact path to the optoelectronic devices and limit electromagnetic interference. In yet another embodiment, a window may be formed in the head region of the mounting structure so as to provide access to the heat spreader. Optoelectronic devices may be adapted to the heat spreader in such a manner that the devices are accessible through the window in the mounting structure.

  7. On Granular Knowledge Structures

    CERN Document Server

    Zeng, Yi

    2008-01-01

    Knowledge plays a central role in human and artificial intelligence. One of the key characteristics of knowledge is its structured organization. Knowledge can be and should be presented in multiple levels and multiple views to meet people's needs in different levels of granularities and from different perspectives. In this paper, we stand on the view point of granular computing and provide our understanding on multi-level and multi-view of knowledge through granular knowledge structures (GKS). Representation of granular knowledge structures, operations for building granular knowledge structures and how to use them are investigated. As an illustration, we provide some examples through results from an analysis of proceeding papers. Results show that granular knowledge structures could help users get better understanding of the knowledge source from set theoretical, logical and visual point of views. One may consider using them to meet specific needs or solve certain kinds of problems.

  8. DISCUSSIONS ON STRUCTURAL COUPLING

    Institute of Scientific and Technical Information of China (English)

    ZHU Wenbin; GUO Lingzhi; MA Ruishi; SUN Yan; WANG Feng

    2004-01-01

    The structural coupling is a common geological phenomenon. The structural differences between eastern and western active continental margins of modern Pacific and between paleo-Pacific and modern-Pacific continental margins are related to the characteristics and status of the subducting oceanic plate, namely, 1. subducting angle; 2. change in subducting angle; 3. subducting velocity; 4. change in subducting velocity; 5. subduction depth; 6. horizontal distance between the leading edge of the subducting plate and the trench; 7. the structural form of the subducting plate at the 670km boundary between the upper and lower mantle; 8. the displacement and the direction of displacement of subducting plate. The control and influence toward the shallow-level structures by the deep-level structural activities is a detailed representation of the structural coupling on active continental margin.The basin-maintain coupling phenomenon is an intracontinental structural coupling. The far field effect of collision between Indian plate and Eurasian plate results in the occurrence of intracontinental A-type subduction in central Asia, and the A-type subduction is the key factor that results in the atrophy of basins and the formation of mountain systems.

  9. Cell packing structures

    KAUST Repository

    Pottmann, Helmut

    2015-03-03

    This paper is an overview of architectural structures which are either composed of polyhedral cells or closely related to them. We introduce the concept of a support structure of such a polyhedral cell packing. It is formed by planar quads and obtained by connecting corresponding vertices in two combinatorially equivalent meshes whose corresponding edges are coplanar and thus determine planar quads. Since corresponding triangle meshes only yield trivial structures, we focus on support structures associated with quad meshes or hex-dominant meshes. For the quadrilateral case, we provide a short survey of recent research which reveals beautiful relations to discrete differential geometry. Those are essential for successfully initializing numerical optimization schemes for the computation of quad-based support structures. Hex-dominant structures may be designed via Voronoi tessellations, power diagrams, sphere packings and various extensions of these concepts. Apart from the obvious application as load-bearing structures, we illustrate here a new application to shading and indirect lighting. On a higher level, our work emphasizes the interplay between geometry, optimization, statics, and manufacturing, with the overall aim of combining form, function and fabrication into novel integrated design tools.

  10. Chromatin Structure and Function

    CERN Document Server

    Wolffe, Alan P

    1999-01-01

    The Third Edition of Chromatin: Structure and Function brings the reader up-to-date with the remarkable progress in chromatin research over the past three years. It has been extensively rewritten to cover new material on chromatin remodeling, histone modification, nuclear compartmentalization, DNA methylation, and transcriptional co-activators and co-repressors. The book is written in a clear and concise fashion, with 60 new illustrations. Chromatin: Structure and Function provides the reader with a concise and coherent account of the nature, structure, and assembly of chromatin and its active

  11. Deployable geodesic truss structure

    Science.gov (United States)

    Mikulas, Martin M., Jr. (Inventor); Rhodes, Marvin D. (Inventor); Simonton, J. Wayne (Inventor)

    1987-01-01

    A deployable geodesic truss structure which can be deployed from a stowed state to an erected state is described. The truss structure includes a series of bays, each bay having sets of battens connected by longitudinal cross members which give the bay its axial and torsional stiffness. The cross members are hinged at their mid point by a joint so that the cross members are foldable for deployment or collapsing. The bays are deployed and stabilized by actuator means connected between the mid point joints of the cross members. Hinged longerons may be provided to also connect the sets of battens and to collapse for stowing with the rest of the truss structure.

  12. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  13. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  14. Robustness of Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2011-01-01

    robust design as well as strategies for maintaining the robustness of existing structures throughout their service life. This paper describes an overall theoretical framework for assessing robustness of structures developed within WG1 “Robustness of structures”. Robustness can be defined in different......An important aspect of the COST Action TU0601 “Robustness of structures” concerns the development of a theoretically sound basis for the assessment of robustness and acceptance criteria for structural robustness which can form the basis for development of practical relevant methods for ensuring...

  15. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature......The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...

  16. Equivariant Zariski Structures

    CERN Document Server

    Solanki, Vinesh

    2011-01-01

    A category of equivariant algebras is defined, after introducing some important examples (the first Weyl algebra, $U_{q}(sl_{2}(k))$ for generic q, quantum tori at generic parameter). To each equivariant algebra, a first order theory is assigned. Model theoretic results are established (uncountable categoricity, quantifier elimination to the level of existential formulas) and that an appropriate dimension theory exists for models, making them Zariski structures. A functor from the category of equivariant algebras to the category of Zariski structures is defined and further properties of equivariant structures are briefly discussed.

  17. Structural patterns in nature

    DEFF Research Database (Denmark)

    Wester, Ture

    2003-01-01

    It seemens that some very basic randomly produced geometric/topological patterns are commonly found in Nature and have often very distinctive structural qualities. In Nature we find the same pattern in all scales from the universe to molecules, from solar systems to packing of cells, from glaciers...... to sea shells, from river systems to trees etc. Sometimes this seeming archetypical morphology involve structrual action and sometimes not-but the fact that it often posses efficient structural action opens a tool for evaluation and analysis of structures in nature and at the same time might...

  18. Kernels for structured data

    CERN Document Server

    Gärtner, Thomas

    2009-01-01

    This book provides a unique treatment of an important area of machine learning and answers the question of how kernel methods can be applied to structured data. Kernel methods are a class of state-of-the-art learning algorithms that exhibit excellent learning results in several application domains. Originally, kernel methods were developed with data in mind that can easily be embedded in a Euclidean vector space. Much real-world data does not have this property but is inherently structured. An example of such data, often consulted in the book, is the (2D) graph structure of molecules formed by

  19. Programming language structures

    CERN Document Server

    Organick, Elliott Irving; Plummer, Robert P

    1978-01-01

    Programming Language Structures deals with the structures of programming languages and introduces the reader to five important programming languages: Algol, Fortran, Lisp, Snobol, and Pascal. The fundamental similarities and differences among these languages are discussed. A unifying framework is constructed that can be used to study the structure of other languages, such as Cobol, PL/I, and APL. Several of the tools and methodologies needed to construct large programs are also considered.Comprised of 10 chapters, this book begins with a summary of the relevant concepts and principles about al

  20. Domain Modeling: NP_001006637.1 [SAHG[Archive

    Lifescience Database Archive (English)

    Full Text Available NP_001006637.1 chr2 Crystal Structure of phosphatidylinositol mannosyltransferase (...PimA) from Mycobacterium smegmatis in complex with GDP p2geka_ chr2/NP_001006637.1/NP_001006637.1_holo_87-45

  1. Domain Modeling: NP_036422.3 [SAHG[Archive

    Lifescience Database Archive (English)

    Full Text Available NP_036422.3 chr2 CRYSTAL STRUCTURE OF HUMAN PIM1 IN COMPLEX WITH IMIDAZOPYRIDAZIN I p2c3ib_ chr2/NP_036422.3.../NP_036422.3_holo_455-750.pdb blast 462L,463G,464R,467F,470V,483A,485K,487H,508E,52

  2. Sensemaking, structuring and strategy

    DEFF Research Database (Denmark)

    Nielsen, Renate

    With the purpose of generating a new understanding of how organisations develop, an interpretive perspective at continuous processes in organisations will be applied: more specifically at sensemaking, structuring and strategising....

  3. Robustness of Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2008-01-01

    . According to Danish design rules robustness shall be documented for all structures in high consequence class. The design procedure to document sufficient robustness consists of: 1) Review of loads and possible failure modes / scenarios and determination of acceptable collapse extent; 2) Review......This paper describes the background of the robustness requirements implemented in the Danish Code of Practice for Safety of Structures and in the Danish National Annex to the Eurocode 0, see (DS-INF 146, 2003), (DS 409, 2006), (EN 1990 DK NA, 2007) and (Sørensen and Christensen, 2006). More...... frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure combined with increased requirements to efficiency in design and execution followed by increased risk of human errors has made the need of requirements to robustness of new structures essential...

  4. Structural dynamic modification

    Indian Academy of Sciences (India)

    A Sestieri

    2000-06-01

    Vibration and acoustic requirements are becoming increasingly important in the design of mechanical structures, but they are not usually of primary concern in the design process. So the need to vary the structural behaviour to solve noise and vibration problems often occurs at the prototype stage, giving rise to the so-called structural modification problem. In this paper, the direct problem of determing the new response of a system, after some modifications are introduced into the sestem, is analysed using two different databases: the modal database and the frequency response function database. The limitaions of the modal database are discussed. Structural modifications that can be accounted for are lumped masses, springs, dampers and dynamic absorbers.

  5. Territorial Administrative Budgetary Structure

    Directory of Open Access Journals (Sweden)

    Lucia Risti

    2011-06-01

    Full Text Available Local budget structure is a consequence of the way the country’s venues are organized from the territorial administrative point of view, in communes, towns, municipalities and the capital, Bucharest, in districts.

  6. Extremely deformable structures

    CERN Document Server

    2015-01-01

    Recently, a new research stimulus has derived from the observation that soft structures, such as biological systems, but also rubber and gel, may work in a post critical regime, where elastic elements are subject to extreme deformations, though still exhibiting excellent mechanical performances. This is the realm of ‘extreme mechanics’, to which this book is addressed. The possibility of exploiting highly deformable structures opens new and unexpected technological possibilities. In particular, the challenge is the design of deformable and bi-stable mechanisms which can reach superior mechanical performances and can have a strong impact on several high-tech applications, including stretchable electronics, nanotube serpentines, deployable structures for aerospace engineering, cable deployment in the ocean, but also sensors and flexible actuators and vibration absorbers. Readers are introduced to a variety of interrelated topics involving the mechanics of extremely deformable structures, with emphasis on ...

  7. Shock structures of astrospheres

    CERN Document Server

    Scherer, Klaus; Kleimann, Jens; Wiengarten, Tobias; Bomans, Dominik J; Weis, Kerstin

    2015-01-01

    The interaction between a supersonic stellar wind and a (super-)sonic interstellar wind has recently been viewed with new interest. We here first give an overview of the modeling, which includes the heliosphere as an example of a special astrosphere. Then we concentrate on the shock structures of fluid models, especially of hydrodynamic (HD) models. More involved models taking into account radiation transfer and magnetic fields are briefly sketched. Even the relatively simple HD models show a rich shock structure, which might be observable in some objects. We employ a single fluid model to study these complex shock structures, and compare the results obtained including heating and cooling with results obtained without these effects. Furthermore, we show that in the hypersonic case valuable information of the shock structure can be obtained from the Rankine-Hugoniot equations. We solved the Euler equations for the single fluid case and also for a case including cooling and heating. We also discuss the analytic...

  8. Differential geometric structures

    CERN Document Server

    Poor, Walter A

    2007-01-01

    This introductory text defines geometric structure by specifying parallel transport in an appropriate fiber bundle and focusing on simplest cases of linear parallel transport in a vector bundle. 1981 edition.

  9. Structural assessment of nanocomposites.

    Science.gov (United States)

    Gan, Yong X

    2012-07-01

    This paper provides an overview on structural assessment of nanocomposite materials. First of all, a brief description of advanced structure characterization methods such as scanning electron microscopy, X-ray diffraction, transmission electron microscopy, atomic force microscopy, and scanning tunneling microscopy is presented. Secondly, applications of these methods for analysis of structures and compositions of typical nanocomposites are introduced. The nanocomposites are formed by different nanoscale processing technologies. Electrochemically polymerized polyaniline (PANi) nanocomposites, thermomechanically processed metal matrix nanocomposites, nanocast ceramic matrix composites are typical examples discussed in this paper. Case studies on several functional nanocomposites for energy storage/conversion, catalysis and sensing applications are mentioned. After that, assessment of the interface structures of nanocomposite materials using surface characterization techniques and mechanical damage models is discussed. Finally, concluding remarks are provided.

  10. Deployable Composite Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is seeking innovative structure technologies that will advance expandable exploration space modules and surface based habitats. To address this need CTD has...

  11. Optimal Sound Absorbing Structures

    CERN Document Server

    Yang, Min; Fu, Caixing; Sheng, Ping

    2016-01-01

    Causal nature of the acoustic response, for any materials or structures, dictates an inequality that relates the absorption spectrum of the sample to its thickness. We present a general recipe for constructing sound-absorbing structures that can attain near-equality for the causal relation with very high absorption performance; such structures are denoted optimal. Our strategy involves using carefully designed acoustic metamaterials as backing to a thin layer of conventional sound absorbing material, e.g., acoustic sponge. By using this design approach, we have realized a 12 cm-thick structure that exhibits broadband, near-perfect flat absorption spectrum starting at around 400 Hz. From the causal relation, the calculated minimum sample thickness is 11.5 cm for the observed absorption spectrum. We present the theory that underlies such absorption performance, involving the evanescent waves and their interaction with a dissipative medium, and show the excellent agreement with the experiment.

  12. FEMA DFIRM Hydraulic Structures

    Data.gov (United States)

    Minnesota Department of Natural Resources — This layer and accompanying attribute table is required whenever hydraulic structures are shown in the flood profile. It is also required if levees are shown on the...

  13. Creep in structures

    Energy Technology Data Exchange (ETDEWEB)

    Zyczkowski, M. (Krakow Univ. of Technology (Poland). Inst. of Mechanics and Machine Design) (ed.)

    1991-01-01

    This volume contains 81 papers divided into three almost equal parts: Constitutive equations, combined loadings; damage, creep crack growth, creep rupture; structures, analytical and numerical methods, optimal design. (orig.).

  14. Bioinspired structured surfaces.

    Science.gov (United States)

    Bhushan, Bharat

    2012-01-24

    Nature has evolved objects with desired functionality using commonly found materials. Nature capitalizes on hierarchical structures to achieve functionality. The understanding of the functions provided by objects and processes found in nature can guide us to produce nanomaterials, nanodevices, and processes with desirable functionality. Various natural objects which provide functionality of commercial interest have been characterized to understand how a natural object provides functionality. We have modeled and fabricated structures in the lab using nature's route and developed optimum structures. Once it is understood how nature does it, optimum structures have been fabricated using smart materials and fabrication techniques. This feature article provides an overview of four topics: Lotus effect, rose petal effect, gecko feet, and shark skin.

  15. Fundamentals of Structural Engineering

    CERN Document Server

    Connor, Jerome J

    2013-01-01

    Fundamentals of Structural Engineering provides a balanced, seamless treatment of both classic, analytic methods and contemporary, computer-based techniques for conceptualizing and designing a structure. The book’s principle goal is to foster an intuitive understanding of structural behavior based on problem solving experience for students of civil engineering and architecture who have been exposed to the basic concepts of engineering mechanics and mechanics of materials. Making it distinct from many other undergraduate textbooks, the authors of this text recognize the notion that engineers reason about behavior using simple models and intuition they acquire through problem solving. The approach adopted in this text develops this type of intuition  by presenting extensive, realistic problems and case studies together with computer simulation, which allows rapid exploration of  how a structure responds to changes in geometry and physical parameters. This book also: Emphasizes problem-based understanding of...

  16. Structures and their analysis

    CERN Document Server

    Fuchs, Maurice Bernard

    2016-01-01

    Addressing structures, this book presents a classic discipline in a modern setting by combining illustrated examples with insights into the solutions. It is the fruit of the author’s many years of teaching the subject and of just as many years of research into the design of optimal structures. Although intended for an advanced level of instruction it has an undergraduate course at its core. Further, the book was written with the advantage of having massive computer power in the background, an aspect which changes the entire approach to many engineering disciplines and in particular to structures. This paradigm shift has dislodged the force (flexibility) method from its former prominence and paved the way for the displacement (stiffness) method, despite the multitude of linear equations it spawns. In this book, however, both methods are taught: the force method offers a perfect vehicle for understanding structural behavior, bearing in mind that it is the displacement method which does the heavy number crunch...

  17. Change in Business Structure

    Data.gov (United States)

    Department of Veterans Affairs — Provides information on whether a company’s change in business structure affects its Data Universal Numbering System (DUNS) Number and its Vendor Information Pages...

  18. Modern frame structure buildings

    National Research Council Canada - National Science Library

    В. М. Першаков; Т. О. Петрова; К. М. Лисницька

    2013-01-01

    The article deals with the design, construction and implementation of reinforced concrete frame structures with span 18, 21 m for agricultural production buildings, hall-premises of public buildings...

  19. Stable generalized complex structures

    CERN Document Server

    Cavalcanti, Gil R

    2015-01-01

    A stable generalized complex structure is one that is generically symplectic but degenerates along a real codimension two submanifold, where it defines a generalized Calabi-Yau structure. We introduce a Lie algebroid which allows us to view such structures as symplectic forms. This allows us to construct new examples of stable structures, and also to define period maps for their deformations in which the background three-form flux is either fixed or not, proving the unobstructedness of both deformation problems. We then use the same tools to establish local normal forms for the degeneracy locus and for Lagrangian branes. Applying our normal forms to the four-dimensional case, we prove that any compact stable generalized complex 4-manifold has a symplectic completion, in the sense that it can be modified near its degeneracy locus to produce a compact symplectic 4-manifold.

  20. Encapsulation with structured triglycerides

    Science.gov (United States)

    Lipids provide excellent materials to encapsulate bioactive compounds for food and pharmaceutical applications. Lipids are renewable, biodegradable, and easily modified to provide additional chemical functionality. The use of structured lipids that have been modified with photoactive properties are ...

  1. Structural Identification Problem

    Directory of Open Access Journals (Sweden)

    Suvorov Aleksei

    2016-01-01

    Full Text Available The identification problem of the existing structures though the Quasi-Newton and its modification, Trust region algorithms is discussed. For the structural problems, which could be represented by means of the mathematical modelling of the finite element code discussed method is extremely useful. The nonlinear minimization problem of the L2 norm for the structures with linear elastic behaviour is solved by using of the Optimization Toolbox of Matlab. The direct and inverse procedures for the composition of the desired function to minimize are illustrated for the spatial 3D truss structure as well as for the problem of plane finite elements. The truss identification problem is solved with 2 and 3 unknown parameters in order to compare the computational efforts and for the graphical purposes. The particular commands of the Matlab codes are present in this paper.

  2. Extracellular matrix structure.

    Science.gov (United States)

    Theocharis, Achilleas D; Skandalis, Spyros S; Gialeli, Chrysostomi; Karamanos, Nikos K

    2016-02-01

    Extracellular matrix (ECM) is a non-cellular three-dimensional macromolecular network composed of collagens, proteoglycans/glycosaminoglycans, elastin, fibronectin, laminins, and several other glycoproteins. Matrix components bind each other as well as cell adhesion receptors forming a complex network into which cells reside in all tissues and organs. Cell surface receptors transduce signals into cells from ECM, which regulate diverse cellular functions, such as survival, growth, migration, and differentiation, and are vital for maintaining normal homeostasis. ECM is a highly dynamic structural network that continuously undergoes remodeling mediated by several matrix-degrading enzymes during normal and pathological conditions. Deregulation of ECM composition and structure is associated with the development and progression of several pathologic conditions. This article emphasizes in the complex ECM structure as to provide a better understanding of its dynamic structural and functional multipotency. Where relevant, the implication of the various families of ECM macromolecules in health and disease is also presented.

  3. Helical surface structures

    CERN Document Server

    Brandenburg, A; Brandenburg, Axel; Blackman, Eric G.

    2002-01-01

    Over the past few years there has been growing interest in helical magnetic field structures seen at the solar surface, in coronal mass ejections, as well as in the solar wind. Although there is a great deal of randomness in the data, on average the extended structures are mostly left-handed on the northern hemisphere and right-handed on the southern. Surface field structures are also classified as dextral (= right bearing) and sinistral (= left bearing) occurring preferentially in the northern and southern hemispheres respectively. Of particular interest here is a quantitative measurement of the associated emergence rates of helical structures, which translate to magnetic helicity fluxes. In this review, we give a brief survey of what has been found so far and what is expected based on models. Particular emphasis is put on the scale dependence of the associated fields and an attempt is made to estimate the helicity flux of the mean field vs. fluctuating field.

  4. Dielectric assist accelerating structure

    Science.gov (United States)

    Satoh, D.; Yoshida, M.; Hayashizaki, N.

    2016-01-01

    A higher-order TM02 n mode accelerating structure is proposed based on a novel concept of dielectric loaded rf cavities. This accelerating structure consists of ultralow-loss dielectric cylinders and disks with irises which are periodically arranged in a metallic enclosure. Unlike conventional dielectric loaded accelerating structures, most of the rf power is stored in the vacuum space near the beam axis, leading to a significant reduction of the wall loss, much lower than that of conventional normal-conducting linac structures. This allows us to realize an extremely high quality factor and a very high shunt impedance at room temperature. A simulation of a 5 cell prototype design with an existing alumina ceramic indicates an unloaded quality factor of the accelerating mode over 120 000 and a shunt impedance exceeding 650 M Ω /m at room temperature.

  5. Adaptive structures flight experiments

    Science.gov (United States)

    Martin, Maurice

    The topics are presented in viewgraph form and include the following: adaptive structures flight experiments; enhanced resolution using active vibration suppression; Advanced Controls Technology Experiment (ACTEX); ACTEX program status; ACTEX-2; ACTEX-2 program status; modular control patch; STRV-1b Cryocooler Vibration Suppression Experiment; STRV-1b program status; Precision Optical Bench Experiment (PROBE); Clementine Spacecraft Configuration; TECHSAT all-composite spacecraft; Inexpensive Structures and Materials Flight Experiment (INFLEX); and INFLEX program status.

  6. Structure of Proton

    CERN Document Server

    Fayyazuddin, A

    2003-01-01

    Electron--proton scattering in elastic and highly inelastic region is reviewed in a unified approach. The importance of parity--violating scattering due to electro--weak interference in probing the structure of proton is emphasized. The importance of longitudnal spin--spin asymmetry as well as parity violating longitudnal asymmetry to extract the structure functions of proton in both regions are discussed. The recoil polarization of proton in the elastic scattering is also discussed.

  7. Deployable Soft Composite Structures

    OpenAIRE

    Wei Wang; Hugo Rodrigue; Sung-Hoon Ahn

    2016-01-01

    Deployable structure composed of smart materials based actuators can reconcile its inherently conflicting requirements of low mass, good shape adaptability, and high load-bearing capability. This work describes the fabrication of deployable structures using smart soft composite actuators combining a soft matrix with variable stiffness properties and hinge-like movement through a rigid skeleton. The hinge actuator has the advantage of being simple to fabricate, inexpensive, lightweight and sim...

  8. Structured luminescence conversion layer

    Science.gov (United States)

    Berben, Dirk; Antoniadis, Homer; Jermann, Frank; Krummacher, Benjamin Claus; Von Malm, Norwin; Zachau, Martin

    2012-12-11

    An apparatus device such as a light source is disclosed which has an OLED device and a structured luminescence conversion layer deposited on the substrate or transparent electrode of said OLED device and on the exterior of said OLED device. The structured luminescence conversion layer contains regions such as color-changing and non-color-changing regions with particular shapes arranged in a particular pattern.

  9. Purely Functional Structured Programming

    OpenAIRE

    Obua, Steven

    2010-01-01

    The idea of functional programming has played a big role in shaping today's landscape of mainstream programming languages. Another concept that dominates the current programming style is Dijkstra's structured programming. Both concepts have been successfully married, for example in the programming language Scala. This paper proposes how the same can be achieved for structured programming and PURELY functional programming via the notion of LINEAR SCOPE. One advantage of this proposal is that m...

  10. Renovation of Roof Structure

    DEFF Research Database (Denmark)

    Kjærbye, Per Oluf H

    1997-01-01

    A 30 year old not-watertight roof based on wooden boards with roofing felt have been changed to a pitched structure with cementos plates. At the same time more thermal insulation has been placed.......A 30 year old not-watertight roof based on wooden boards with roofing felt have been changed to a pitched structure with cementos plates. At the same time more thermal insulation has been placed....

  11. Structure function monitor

    Energy Technology Data Exchange (ETDEWEB)

    McGraw, John T [Placitas, NM; Zimmer, Peter C [Albuquerque, NM; Ackermann, Mark R [Albuquerque, NM

    2012-01-24

    Methods and apparatus for a structure function monitor provide for generation of parameters characterizing a refractive medium. In an embodiment, a structure function monitor acquires images of a pupil plane and an image plane and, from these images, retrieves the phase over an aperture, unwraps the retrieved phase, and analyzes the unwrapped retrieved phase. In an embodiment, analysis yields atmospheric parameters measured at spatial scales from zero to the diameter of a telescope used to collect light from a source.

  12. REACTOR MODERATOR STRUCTURE

    Science.gov (United States)

    Greenstreet, B.L.

    1963-12-31

    A system for maintaining the alignment of moderator block structures in reactors is presented. Integral restraining grids are placed between each layer of blocks in the moderator structure, at the top of the uppermost layer, and at the bottom of the lowermost layer. Slots are provided in the top and bottom surfaces of the moderator blocks so as to provide a keying action with the grids. The grids are maintained in alignment by vertical guiding members disposed about their peripheries. (AEC)

  13. Structural Transformation in Ecuador

    OpenAIRE

    Ricardo Hausmann; Bailey Klinger

    2010-01-01

    This paper applies new techniques and metrics to analyze Ecuador's past record of and future opportunities for structural transformation. Ecuador's export dynamics and the emergence of new export activities have been the historical drivers of the country's growth, but recently Ecuador's export basket has undergone little structural transformation. The same broad sectors continue to dominate, and the overall sophistication of the export basket has actually declined in recent years. In order to...

  14. Estonian Tax Structure

    Directory of Open Access Journals (Sweden)

    Viktor Trasberg

    2014-08-01

    Full Text Available The paper analyses Estonian tax structure changes during the last decade and critically assesses the current situation. The country’s tax mix is rather unique among EU countries – it has one of the highest proportions of consumption taxes in total taxes and the lowest level of capital and profit taxes. Such an unbalanced tax structure creates risks for public finances, limits revenue collection and distorts the business environment.

  15. Trajectory grouping structure

    Directory of Open Access Journals (Sweden)

    Maike Buchin

    2015-03-01

    Full Text Available The collective motion of a set of moving entities like people, birds, or other animals, is characterized by groups arising, merging, splitting, and ending. Given the trajectories of these entities, we define and model a structure that captures all of such changes using the Reeb graph, a concept from topology. The trajectory grouping structure has three natural parameters that allow more global views of the data in group size, group duration, and entity inter-distance. We prove complexity bounds on the maximum number of maximal groups that can be present, and give algorithms to compute the grouping structure efficiently. We also study how the trajectory grouping structure can be made robust, that is, how brief interruptions of groups can be disregarded in the global structure, adding a notion of persistence to the structure. Furthermore, we showcase the results of experiments using data generated by the NetLogo flocking model and from the Starkey project. The Starkey data describe the movement of elk, deer, and cattle. Although there is no ground truth for the grouping structure in this data, the experiments show that the trajectory grouping structure is plausible and has the desired effects when changing the essential parameters. Our research provides the first complete study of trajectory group evolvement, including combinatorial,algorithmic, and experimental results.

  16. Meteorite Seymchan structure

    Science.gov (United States)

    Hontsova, S. S.; Petrova, E. V.; Muftahetdinova, R. F.; Chulanova, V. N.; Grokhovsky, V. I.

    2016-09-01

    The meteorite Seymchan specimen was studied using optical microscopy and scanning electron microscopy. Olivine grains have roundish shapes, which was formed during matter cooling. Different features of the metal structure such as plessite structure and Neimann bands were observed. The oxide edges were observed in the boundaries between phases. The oxides were formed in the terrestrial conditions. The boundary regions between metal and olivine in the meteorite contain grains of troilite, schreibersite, and chromite.

  17. Integral Textile Ceramic Structures

    Science.gov (United States)

    Marshall, David B.; Cox, Brian N.

    2008-08-01

    A new paradigm for ceramic composite structural components enables functionality in heat exchange, transpiration, detailed shape, and thermal strain management that significantly exceeds the prior art. The paradigm is based on the use of three-dimensional fiber reinforcement that is tailored to the specific shape, stress, and thermal requirements of a structural application and therefore generally requires innovative textile methods for each realization. Key features include the attainment of thin skins (less than 1 mm) that are nevertheless structurally robust, transpiration holes formed without cutting fibers, double curvature, compliant integral attachment to other structures that avoids thermal stress buildup, and microcomposite ceramic matrices that minimize spalling and allow the formation of smooth surfaces. All these features can be combined into structures of very varied gross shape and function, using a wide range of materials such as all-oxide systems and SiC and carbon fibers in SiC matrices. Illustrations are drawn from rocket nozzles, thermal protection systems, and gas turbine engines. The new design challenges that arise for such material/structure systems are being met by specialized computational modeling that departs significantly in the representation of materials behavior from that used in conventional finite element methods.

  18. Structural optimization of free-form reciprocal structures

    DEFF Research Database (Denmark)

    Parigi, Dario

    2014-01-01

    This paper presents an optimization algorithm for the design of structurally efficient free-form reciprocal structures. Because of the geometric complexity of reciprocal structures, only a few structural studies have been carried out so far, and we have a limited knowledge of the relation between...... geometry and structural behaviour in reciprocal structures. This study takes advantage of the preceding work carried by the author on the Reciprocalizer, a software tool for the generation of reciprocal geometries. The Reciprocalizer has been included into a structural optimization algorithm...... for the generation of structurally efficient free-form reciprocal structures....

  19. Structural prediction in aphasia

    Directory of Open Access Journals (Sweden)

    Tessa Warren

    2015-05-01

    Full Text Available There is considerable evidence that young healthy comprehenders predict the structure of upcoming material, and that their processing is facilitated when they encounter material matching those predictions (e.g., Staub & Clifton, 2006; Yoshida, Dickey & Sturt, 2013. However, less is known about structural prediction in aphasia. There is evidence that lexical prediction may be spared in aphasia (Dickey et al., 2014; Love & Webb, 1977; cf. Mack et al, 2013. However, predictive mechanisms supporting facilitated lexical access may not necessarily support structural facilitation. Given that many people with aphasia (PWA exhibit syntactic deficits (e.g. Goodglass, 1993, PWA with such impairments may not engage in structural prediction. However, recent evidence suggests that some PWA may indeed predict upcoming structure (Hanne, Burchert, De Bleser, & Vashishth, 2015. Hanne et al. tracked the eyes of PWA (n=8 with sentence-comprehension deficits while they listened to reversible subject-verb-object (SVO and object-verb-subject (OVS sentences in German, in a sentence-picture matching task. Hanne et al. manipulated case and number marking to disambiguate the sentences’ structure. Gazes to an OVS or SVO picture during the unfolding of a sentence were assumed to indicate prediction of the structure congruent with that picture. According to this measure, the PWA’s structural prediction was impaired compared to controls, but they did successfully predict upcoming structure when morphosyntactic cues were strong and unambiguous. Hanne et al.’s visual-world evidence is suggestive, but their forced-choice sentence-picture matching task places tight constraints on possible structural predictions. Clearer evidence of structural prediction would come from paradigms where the content of upcoming material is not as constrained. The current study used self-paced reading study to examine structural prediction among PWA in less constrained contexts. PWA (n=17 who

  20. RNA Thermodynamic Structural Entropy.

    Science.gov (United States)

    Garcia-Martin, Juan Antonio; Clote, Peter

    2015-01-01

    Conformational entropy for atomic-level, three dimensional biomolecules is known experimentally to play an important role in protein-ligand discrimination, yet reliable computation of entropy remains a difficult problem. Here we describe the first two accurate and efficient algorithms to compute the conformational entropy for RNA secondary structures, with respect to the Turner energy model, where free energy parameters are determined from UV absorption experiments. An algorithm to compute the derivational entropy for RNA secondary structures had previously been introduced, using stochastic context free grammars (SCFGs). However, the numerical value of derivational entropy depends heavily on the chosen context free grammar and on the training set used to estimate rule probabilities. Using data from the Rfam database, we determine that both of our thermodynamic methods, which agree in numerical value, are substantially faster than the SCFG method. Thermodynamic structural entropy is much smaller than derivational entropy, and the correlation between length-normalized thermodynamic entropy and derivational entropy is moderately weak to poor. In applications, we plot the structural entropy as a function of temperature for known thermoswitches, such as the repression of heat shock gene expression (ROSE) element, we determine that the correlation between hammerhead ribozyme cleavage activity and total free energy is improved by including an additional free energy term arising from conformational entropy, and we plot the structural entropy of windows of the HIV-1 genome. Our software RNAentropy can compute structural entropy for any user-specified temperature, and supports both the Turner'99 and Turner'04 energy parameters. It follows that RNAentropy is state-of-the-art software to compute RNA secondary structure conformational entropy. Source code is available at https://github.com/clotelab/RNAentropy/; a full web server is available at http

  1. RNA Thermodynamic Structural Entropy.

    Directory of Open Access Journals (Sweden)

    Juan Antonio Garcia-Martin

    Full Text Available Conformational entropy for atomic-level, three dimensional biomolecules is known experimentally to play an important role in protein-ligand discrimination, yet reliable computation of entropy remains a difficult problem. Here we describe the first two accurate and efficient algorithms to compute the conformational entropy for RNA secondary structures, with respect to the Turner energy model, where free energy parameters are determined from UV absorption experiments. An algorithm to compute the derivational entropy for RNA secondary structures had previously been introduced, using stochastic context free grammars (SCFGs. However, the numerical value of derivational entropy depends heavily on the chosen context free grammar and on the training set used to estimate rule probabilities. Using data from the Rfam database, we determine that both of our thermodynamic methods, which agree in numerical value, are substantially faster than the SCFG method. Thermodynamic structural entropy is much smaller than derivational entropy, and the correlation between length-normalized thermodynamic entropy and derivational entropy is moderately weak to poor. In applications, we plot the structural entropy as a function of temperature for known thermoswitches, such as the repression of heat shock gene expression (ROSE element, we determine that the correlation between hammerhead ribozyme cleavage activity and total free energy is improved by including an additional free energy term arising from conformational entropy, and we plot the structural entropy of windows of the HIV-1 genome. Our software RNAentropy can compute structural entropy for any user-specified temperature, and supports both the Turner'99 and Turner'04 energy parameters. It follows that RNAentropy is state-of-the-art software to compute RNA secondary structure conformational entropy. Source code is available at https://github.com/clotelab/RNAentropy/; a full web server is available at http

  2. Hierarchically Structured Electrospun Fibers

    Directory of Open Access Journals (Sweden)

    Nicole E. Zander

    2013-01-01

    Full Text Available Traditional electrospun nanofibers have a myriad of applications ranging from scaffolds for tissue engineering to components of biosensors and energy harvesting devices. The generally smooth one-dimensional structure of the fibers has stood as a limitation to several interesting novel applications. Control of fiber diameter, porosity and collector geometry will be briefly discussed, as will more traditional methods for controlling fiber morphology and fiber mat architecture. The remainder of the review will focus on new techniques to prepare hierarchically structured fibers. Fibers with hierarchical primary structures—including helical, buckled, and beads-on-a-string fibers, as well as fibers with secondary structures, such as nanopores, nanopillars, nanorods, and internally structured fibers and their applications—will be discussed. These new materials with helical/buckled morphology are expected to possess unique optical and mechanical properties with possible applications for negative refractive index materials, highly stretchable/high-tensile-strength materials, and components in microelectromechanical devices. Core-shell type fibers enable a much wider variety of materials to be electrospun and are expected to be widely applied in the sensing, drug delivery/controlled release fields, and in the encapsulation of live cells for biological applications. Materials with a hierarchical secondary structure are expected to provide new superhydrophobic and self-cleaning materials.

  3. PRSEUS Structural Concept Development

    Science.gov (United States)

    Velicki, Alex; Jegley, Dawn

    2014-01-01

    A lighter, more robust airframe is one of the key technological advancements necessary for the successful launch of any large next-generation transport aircraft. Such a premise dictates that considerable improvements beyond current state-of-the-art aluminum structures is needed, and that improvements of this magnitude will require an extensive use of composite materials that are not only lightweight, but also economical to produce. To address this challenge, researchers at NASA and The Boeing Company are developing a novel structural concept called the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) under the Environmentally Responsible Aviation (ERA) Project. It is an integrally stiffened panel concept that is stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. In addition to improved structural performance, an important facet of this unique arrangement of stitched carbon fibers is its innovative manufacturing method that has the potential to lower fabrication costs by eliminating fasteners and autoclave cures. The rationale and development status for this new approach forms the basis of the work described in this paper. The test specimens described herein were fabricated, or are currently being fabricated, by The Boeing Company, while the structural analyses and testing tasks are being performed by NASA and Boeing personnel.

  4. Prosodic Structure as a Parallel to Musical Structure

    Science.gov (United States)

    Heffner, Christopher C.; Slevc, L. Robert

    2015-01-01

    What structural properties do language and music share? Although early speculation identified a wide variety of possibilities, the literature has largely focused on the parallels between musical structure and syntactic structure. Here, we argue that parallels between musical structure and prosodic structure deserve more attention. We review the evidence for a link between musical and prosodic structure and find it to be strong. In fact, certain elements of prosodic structure may provide a parsimonious comparison with musical structure without sacrificing empirical findings related to the parallels between language and music. We then develop several predictions related to such a hypothesis. PMID:26733930

  5. Structure and biophysics

    CERN Document Server

    Puglisi, Joseph D

    2007-01-01

    This volume is a collection of articles from the proceedings of the ISSBMR 7th Course: Structure and Biophysics - New Technologies for Current Challenges in Biology and Beyond. This NATO Advanced Institute (ASI) was held in Erice at the Ettore Majorana Foundation and Centre for Scientific Culture on 22 June through 3 July 2005. The ASI brought together a diverse group of experts in the fields of Structural Biology, Biophysics and Physics. Prominent lecturers, from seven different countries, and students from around the world participated in the NATO ASI organized by Professors Joseph Puglisi (Stanford University, USA) and Alexander Arseniev (Moscow, RU). Advances in nuclear magnetic resonance spectroscopy (NMR) and x-ray crystallography have allowed the three-dimensional structures of many biological macromolecules and their complexes, including the ribosome and RNA polymerase to be solved. Fundamental principles of NMR spectroscopy and dynamics, x-ray crystallography, computation and experimental dynamics we...

  6. Structural motion engineering

    CERN Document Server

    Connor, Jerome

    2014-01-01

    This innovative volume provides a systematic treatment of the basic concepts and computational procedures for structural motion design and engineering for civil installations. The authors illustrate the application of motion control to a wide spectrum of buildings through many examples. Topics covered include optimal stiffness distributions for building-type structures, the role of damping in controlling motion, tuned mass dampers, base isolation systems, linear control, and nonlinear control. The book's primary objective is the satisfaction of motion-related design requirements, such as restrictions on displacement and acceleration. The book is ideal for practicing engineers and graduate students. This book also: ·         Broadens practitioners' understanding of structural motion control, the enabling technology for motion-based design ·         Provides readers the tools to satisfy requirements of modern, ultra-high strength materials that lack corresponding stiffness, where the motion re...

  7. Freeform Honeycomb Structures

    KAUST Repository

    Jiang, Caigui

    2014-07-01

    Motivated by requirements of freeform architecture, and inspired by the geometry of hexagonal combs in beehives, this paper addresses torsion-free structures aligned with hexagonal meshes. Since repetitive geometry is a very important contribution to the reduction of production costs, we study in detail “honeycomb structures”, which are defined as torsion-free structures where the walls of cells meet at 120 degrees. Interestingly, the Gauss-Bonnet theorem is useful in deriving information on the global distribution of node axes in such honeycombs. This paper discusses the computation and modeling of honeycomb structures as well as applications, e.g. for shading systems, or for quad meshing. We consider this paper as a contribution to the wider topic of freeform patterns, polyhedral or otherwise. Such patterns require new approaches on the technical level, e.g. in the treatment of smoothness, but they also extend our view of what constitutes aesthetic freeform geometry.

  8. Graphene heat dissipating structure

    Energy Technology Data Exchange (ETDEWEB)

    Washburn, Cody M.; Lambert, Timothy N.; Wheeler, David R.; Rodenbeck, Christopher T.; Railkar, Tarak A.

    2017-08-01

    Various technologies presented herein relate to forming one or more heat dissipating structures (e.g., heat spreaders and/or heat sinks) on a substrate, wherein the substrate forms part of an electronic component. The heat dissipating structures are formed from graphene, with advantage being taken of the high thermal conductivity of graphene. The graphene (e.g., in flake form) is attached to a diazonium molecule, and further, the diazonium molecule is utilized to attach the graphene to material forming the substrate. A surface of the substrate is treated to comprise oxide-containing regions and also oxide-free regions having underlying silicon exposed. The diazonium molecule attaches to the oxide-free regions, wherein the diazonium molecule bonds (e.g., covalently) to the exposed silicon. Attachment of the diazonium plus graphene molecule is optionally repeated to enable formation of a heat dissipating structure of a required height.

  9. Implications of social structure

    DEFF Research Database (Denmark)

    Brask, Josefine Bohr

    social environment of the individual. In the last two studies, we investigate the role of social structure for cooperation in a classic natural system for behavioural research, the Trinidadian guppy (Poecilia reticulata), by means of computer simulations. Cooperation contradicts evolutionary theory......, we investigate empirically the role of the social environment of individuals for their communication patterns. Our study species is a song bird, the black-capped chickadee (Poecile atricapillus). The results suggest that individual communication in this species is influenced by features of the local...... and requires special explanations. Theory predicts that heterogeneous social structure can support and promote cooperation in populations. Our simulations suggest that social structure may not be able to explain the presence of cooperation in the guppy system. Overall the thesis provides new insights...

  10. Human Spacecraft Structures Internship

    Science.gov (United States)

    Bhakta, Kush

    2017-01-01

    DSG will be placed in halo orbit around themoon- Platform for international/commercialpartners to explore lunar surface- Testbed for technologies needed toexplore Mars• Habitat module used to house up to 4crew members aboard the DSG- Launched on EM-3- Placed inside SLS fairing Habitat Module - Task Habitat Finite Element Model Re-modeled entire structure in NX2) Used Beam and Shell elements torepresent the pressure vessel structure3) Created a point cloud of centers of massfor mass components- Can now inspect local moments andinertias for thrust ring application8/ Habitat Structure – Docking Analysis Problem: Artificial Gravity may be necessary forastronaut health in deep spaceGoal: develop concepts that show how artificialgravity might be incorporated into a spacecraft inthe near term Orion Window Radiant Heat Testing.

  11. Structure learning in action

    Science.gov (United States)

    Braun, Daniel A.; Mehring, Carsten; Wolpert, Daniel M.

    2010-01-01

    ‘Learning to learn’ phenomena have been widely investigated in cognition, perception and more recently also in action. During concept learning tasks, for example, it has been suggested that characteristic features are abstracted from a set of examples with the consequence that learning of similar tasks is facilitated—a process termed ‘learning to learn’. From a computational point of view such an extraction of invariants can be regarded as learning of an underlying structure. Here we review the evidence for structure learning as a ‘learning to learn’ mechanism, especially in sensorimotor control where the motor system has to adapt to variable environments. We review studies demonstrating that common features of variable environments are extracted during sensorimotor learning and exploited for efficient adaptation in novel tasks. We conclude that structure learning plays a fundamental role in skill learning and may underlie the unsurpassed flexibility and adaptability of the motor system. PMID:19720086

  12. Laser induced structural vibration

    Science.gov (United States)

    Koss, L. L.; Tobin, R. C.

    1983-01-01

    A technique is described for exciting structural vibration by using a focussed laser beam to vaporize material from a target attached to the structure. The rapid ejection of material results in an impulsive reaction to the target which is transmitted to the structure. The method has been studied with a Nd: glass laser, operated in the long pulse mode, in combination with a bismuth target attached in turn to a ballistic pendulum and cantilever beam. The specific mechanical energy was found to be proportional to the laser pulse energy raised to a power in the range 2.5-2.9. The highest efficiency of energy transfer achieved for the first vibrational mode of the cantilever was about 2 millipercent for the maximum laser pulse energy used, 1.5 J, the signal to noise ratio then being about 40 dB.

  13. Dynamic Data Structures

    DEFF Research Database (Denmark)

    Kejlberg-Rasmussen, Casper

    to a given key? The updates we can do are: inserting a new key or deleting a given key. Our dictionary has the working set property, which means that the running time of a query depends on the query distribution. Specifically the time to search for a key depends on when we last searched for it. Our data...... statements about our data structure, which are based on the structure of the underlying problem, that we are trying to solve. We can rely on the properties of the invariants when performing queries, and in return we need to ensure that the invariants remain true after we perform updates. When designing data......In this thesis I will address three dynamic data structure problems using the concept of invariants. The first problem is maintaining a dynamically changing set of keys – a dictionary – where the queries we can ask are: does it contain a given key? and what is the preceding (or succeeding) key...

  14. Dynamic Data Structures

    DEFF Research Database (Denmark)

    Tsakalidis, Konstantinos

    We study dynamic data structures for different variants of orthogonal range reporting query problems. In particular, we consider (1) the planar orthogonal 3-sided range reporting problem: given a set of points in the plane, report the points that lie within a given 3-sided rectangle with one....... Dynamic problems like the above arise in various applications of network optimization, VLSI layout design, computer graphics and distributed computing. For the first problem, we present dynamic data structures for internal and external memory that support planar orthogonal 3-sided range reporting queries......, and insertions and deletions of points efficiently over an average case sequence of update operations. The external memory data structures find applications in constraint and temporal databases. In particular, we assume that the coordinates of the points are drawn from different probabilistic distributions...

  15. Dynamic Data Structures

    DEFF Research Database (Denmark)

    Kejlberg-Rasmussen, Casper

    statements about our data structure, which are based on the structure of the underlying problem, that we are trying to solve. We can rely on the properties of the invariants when performing queries, and in return we need to ensure that the invariants remain true after we perform updates. When designing data......In this thesis I will address three dynamic data structure problems using the concept of invariants. The first problem is maintaining a dynamically changing set of keys – a dictionary – where the queries we can ask are: does it contain a given key? and what is the preceding (or succeeding) key...... to a given key? The updates we can do are: inserting a new key or deleting a given key. Our dictionary has the working set property, which means that the running time of a query depends on the query distribution. Specifically the time to search for a key depends on when we last searched for it. Our data...

  16. Structure of potato starch

    DEFF Research Database (Denmark)

    Bertoft, Eric; Blennow, Andreas

    2016-01-01

    are interconnected by long chains with more than 36 residues. The clusters consist of still smaller, very tightly branched building blocks. The clusters direct the semicrystalline structures found inside the starch granules. The crystals, which are ~5.2. nm thick, contain double helices formed from the external...... chains extending from the clusters. A range of enzymes is involved in the biosynthesis of the cluster structures and linear segments. These are required for sugar activation, chain elongation, branching, and trimming of the final branching pattern. As an interesting feature, potato amylopectin...... is substituted with low amounts of phosphate groups monoesterified to the C-3 and the C-6 carbons of the glucose units. They seem to align well in the granular structure and have tremendous effects on starch degradation in the potato and functionality of the refined starch. A specific dikinase catalyzes...

  17. Folksodriven Structure Network

    CERN Document Server

    Mas, Massimiliano Dal

    2011-01-01

    Nowadays folksonomy is used as a system derived from user-generated electronic tags or keywords that annotate and describe online content. But it is not a classification system as an ontology. To consider it as a classification system it would be necessary to share a representation of contexts by all the users. This paper is proposing the use of folksonomies and network theory to devise a new concept: a "Folksodriven Structure Network" to represent folksonomies. This paper proposed and analyzed the network structure of Folksodriven tags thought as folsksonomy tags suggestions for the user on a dataset built on chosen websites. It is observed that the Folksodriven Network has relative low path lengths checking it with classic networking measures (clustering coefficient). Experiment result shows it can facilitate serendipitous discovery of content among users. Neat examples and clear formulas can show how a "Folksodriven Structure Network" can be used to tackle ontology mapping challenges.

  18. Structural power flow measurement

    Energy Technology Data Exchange (ETDEWEB)

    Falter, K.J.; Keltie, R.F.

    1988-12-01

    Previous investigations of structural power flow through beam-like structures resulted in some unexplained anomalies in the calculated data. In order to develop structural power flow measurement as a viable technique for machine tool design, the causes of these anomalies needed to be found. Once found, techniques for eliminating the errors could be developed. Error sources were found in the experimental apparatus itself as well as in the instrumentation. Although flexural waves are the carriers of power in the experimental apparatus, at some frequencies longitudinal waves were excited which were picked up by the accelerometers and altered power measurements. Errors were found in the phase and gain response of the sensors and amplifiers used for measurement. A transfer function correction technique was employed to compensate for these instrumentation errors.

  19. Structural Sparse Tracking

    KAUST Repository

    Zhang, Tianzhu

    2015-06-01

    Sparse representation has been applied to visual tracking by finding the best target candidate with minimal reconstruction error by use of target templates. However, most sparse representation based trackers only consider holistic or local representations and do not make full use of the intrinsic structure among and inside target candidates, thereby making the representation less effective when similar objects appear or under occlusion. In this paper, we propose a novel Structural Sparse Tracking (SST) algorithm, which not only exploits the intrinsic relationship among target candidates and their local patches to learn their sparse representations jointly, but also preserves the spatial layout structure among the local patches inside each target candidate. We show that our SST algorithm accommodates most existing sparse trackers with the respective merits. Both qualitative and quantitative evaluations on challenging benchmark image sequences demonstrate that the proposed SST algorithm performs favorably against several state-of-the-art methods.

  20. Implications of social structure

    DEFF Research Database (Denmark)

    Brask, Josefine Bohr

    Social systems in nature are characterised by heterogeneous social structures. The pattern of social interactions or associations between individuals within populations (i.e. their social network) is typically non-random. Such structuring may have important implications for the expression......, we investigate empirically the role of the social environment of individuals for their communication patterns. Our study species is a song bird, the black-capped chickadee (Poecile atricapillus). The results suggest that individual communication in this species is influenced by features of the local...... social environment of the individual. In the last two studies, we investigate the role of social structure for cooperation in a classic natural system for behavioural research, the Trinidadian guppy (Poecilia reticulata), by means of computer simulations. Cooperation contradicts evolutionary theory...

  1. Superalloy Lattice Block Structures

    Science.gov (United States)

    Nathal, M. V.; Whittenberger, J. D.; Hebsur, M. G.; Kantzos, P. T.; Krause, D. L.

    2004-01-01

    Initial investigations of investment cast superalloy lattice block suggest that this technology will yield a low cost approach to utilize the high temperature strength and environmental resistance of superalloys in lightweight, damage tolerant structural configurations. Work to date has demonstrated that relatively large superalloy lattice block panels can be successfully investment cast from both IN-718 and Mar-M247. These castings exhibited mechanical properties consistent with the strength of the same superalloys measured from more conventional castings. The lattice block structure also accommodates significant deformation without failure, and is defect tolerant in fatigue. The potential of lattice block structures opens new opportunities for the use of superalloys in future generations of aircraft applications that demand strength and environmental resistance at elevated temperatures along with low weight.

  2. Dynamics of structures

    CERN Document Server

    Paultre, Patrick

    2013-01-01

    This book covers structural dynamics from a theoretical and algorithmic approach. It covers systems with both single and multiple degrees-of-freedom. Numerous case studies are given to provide the reader with a deeper insight into the practicalities of the area, and the solutions to these case studies are given in terms of real-time and frequency in both geometric and modal spaces. Emphasis is also given to the subject of seismic loading. The text is based on many lectures on the subject of structural dynamics given at numerous institutions and thus will be an accessible and practical aid to

  3. Cellular structural biology.

    Science.gov (United States)

    Ito, Yutaka; Selenko, Philipp

    2010-10-01

    While we appreciate the complexity of the intracellular environment as a general property of every living organism, we collectively lack the appropriate tools to analyze protein structures in a cellular context. In-cell NMR spectroscopy represents a novel biophysical tool to investigate the conformational and functional characteristics of biomolecules at the atomic level inside live cells. Here, we review recent in-cell NMR developments and provide an outlook towards future applications in prokaryotic and eukaryotic cells. We hope to thereby emphasize the usefulness of in-cell NMR techniques for cellular studies of complex biological processes and for structural analyses in native environments. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. Structured Analog CMOS Design

    CERN Document Server

    Stefanovic, Danica

    2008-01-01

    Structured Analog CMOS Design describes a structured analog design approach that makes it possible to simplify complex analog design problems and develop a design strategy that can be used for the design of large number of analog cells. It intentionally avoids treating the analog design as a mathematical problem, developing a design procedure based on the understanding of device physics and approximations that give insight into parameter interdependences. The proposed transistor-level design procedure is based on the EKV modeling approach and relies on the device inversion level as a fundament

  5. POLYMERIC SURFACTANT STRUCTURE

    Institute of Scientific and Technical Information of China (English)

    P.M. Saville; J.W. White

    2001-01-01

    Polymeric surfactants are amongst the most widespread of all polymers. In nature, proteins and polysaccharides cause self organization as a result of this surfactancy; in industry, polymeric surfactants play key roles in the food, explosives and surface coatings sectors. The generation of useful nano- and micro-structures in films and emulsions as a result of polymer amphiphilicity and the application of mechanical stress is discussed. The use of X-ray and neutron small angle scattering and reflectivity to measure these structures and their dynamic properties will be described. New results on linear and dendritic polymer surfactants are presented.

  6. Kilns and Firing Structures

    OpenAIRE

    Nicholson, Paul

    2010-01-01

    The purpose of firing pottery is to change clay, a plastic material, into ceramic, which is aplastic. Examined here are structures designed to fire pottery or faience or to make glass (although the latter might be better described as furnaces). Firing can take place in an open, bonfire-like environment, which can also be enclosed as a firing structure. Beyond this is the development of the true kiln of which there are two main types: updraft and downdraft. The first of these is by far the mos...

  7. Objective Eulerian Coherent Structures

    CERN Document Server

    Serra, M

    2015-01-01

    We define objective Eulerian Coherent Structures (OECSs) in two-dimensional, non-autonomous dynamical systems as instantaneously most influential material curves. Specifically, OECSs are stationary curves of the averaged instantaneous material stretching-rate or material shearing-rate functionals. From these objective (frame-invariant) variational principles, we obtain explicit differential equations for hyperbolic, elliptic and parabolic OECSs. As illustration, we compute OECSs in an unsteady ocean velocity data set. In comparison to structures suggested by other common Eulerian diagnostic tools, we find OECSs to be the correct short-term cores of observed trajectory deformation patterns.

  8. Nuclear structure and astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Grawe, H [Gesellschaft fuer Schwerionenforschung (GSI), D-64291 Darmstadt (Germany); Langanke, K [Gesellschaft fuer Schwerionenforschung (GSI), D-64291 Darmstadt (Germany); MartInez-Pinedo, G [Gesellschaft fuer Schwerionenforschung (GSI), D-64291 Darmstadt (Germany)

    2007-09-15

    The nuclear structure in regions of the Segre chart which are of astrophysical importance is reviewed. The main emphasis is put on those nuclei that are relevant for stellar nucleosynthesis in fusion processes, and in slow neutron capture, both located close to stability, rapid neutron capture close to the neutron dripline and rapid proton capture near the proton dripline. The basic features of modern nuclear structure, their importance and future potential for astrophysics and their level of predictibility are critically discussed. Recent experimental and theoretical results for shell evolution far off the stability line and consequences for weak interaction processes, proton and neutron capture are reviewed.

  9. Structural dynamics analysis

    Science.gov (United States)

    Housner, J. M.; Anderson, M.; Belvin, W.; Horner, G.

    1985-01-01

    Dynamic analysis of large space antenna systems must treat the deployment as well as vibration and control of the deployed antenna. Candidate computer programs for deployment dynamics, and issues and needs for future program developments are reviewed. Some results for mast and hoop deployment are also presented. Modeling of complex antenna geometry with conventional finite element methods and with repetitive exact elements is considered. Analytical comparisons with experimental results for a 15 meter hoop/column antenna revealed the importance of accurate structural properties including nonlinear joints. Slackening of cables in this antenna is also a consideration. The technology of designing actively damped structures through analytical optimization is discussed and results are presented.

  10. Structural model integrity

    Science.gov (United States)

    Wallerstein, D. V.; Lahey, R. S.; Haggenmacher, G. W.

    1977-01-01

    Many of the practical aspects and problems of ensuring the integrity of a structural model are discussed, as well as the steps which have been taken in the NASTRAN system to assure that these checks can be routinely performed. Model integrity as used applies not only to the structural model but also to the loads applied to the model. Emphasis is also placed on the fact that when dealing with substructure analysis, all of the checking procedures discussed should be applied at the lowest level of substructure prior to any coupling.

  11. Stellar structure of magnetars

    Science.gov (United States)

    Dong, JianMin; Zuo, Wei; Gu, JianZhong; Shang, XinLe

    2016-04-01

    Magnetars are strong magnetized neutron stars which could emit quiescent X-ray, repeating burst of soft gamma ray, and even the giant flares. We investigate the effects of magnetic fields on the structure of isolated magnetars. The stellar structure together with the magnetic field configuration can be obtained at the same time within a self-consistent procedure. The magnetar mass and radius are found to be weakly enhanced by the strong magnetic fields. Unlike other previous investigations, the magnetic field is unable to violate the mass limit of the neutron stars.

  12. Dissipative structures and chaos

    CERN Document Server

    Mori, Hazime

    1998-01-01

    This monograph consists of two parts and gives an approach to the physics of open nonequilibrium systems. Part I derives the phenomena of dissipative structures on the basis of reduced evolution equations and includes Bénard convection and Belousov-Zhabotinskii chemical reactions. Part II discusses the physics and structures of chaos. While presenting a construction of the statistical physics of chaos, the authors unify the geometrical and statistical descriptions of dynamical systems. The shape of chaotic attractors is characterized, as are the mixing and diffusion of chaotic orbits and the fluctuation of energy dissipation exhibited by chaotic systems.

  13. Structure refinement of astrophyllite

    Institute of Scientific and Technical Information of China (English)

    MA; Zhesheng

    2001-01-01

    [1]Abdel-Fattah M. Abdel-Rahman., Mineral chemistry and paragenesis of astrophyllite from Egypt, Mineralogical Magazine, 1992, 56: 17-26.[2]Liu Yan, Ma Zhesheng, Han Xiuling et al, Astrophyllite from the Namjabarwa Area, Eastern Tibet, Acta Petrologica et Mineralogica, 1997,16(4): 338-340.[3]Peng Zhizhong, Ma Zhesheng, The crystal structure of astrophyllite (in Russian), Scientia Sinica, 1963, 12(2): 272-276.[4]Pen Zhizhong, Ma Zhesheng, The crystal structure of Tricinic Mangano-astrophyllite (in Russian), Scientia Sinica (Scien-ce in China), 1964, 13(7): 1180-1183.[5]Shi Nicheng, Ma Zhesheng, Li Guowu et al., Stucyure Refinement of Monoclinic astrophyllite, Acta Crystallographica, Section B, 1998, B54: 109-114.[6]Woodrow, P. J., The Crystal structure of astrophyllite, Acta Crystallographica, 1967, 22: 673-678.[7]СеменовЕ. И., Куплетскит-Новый Минерал Группы Астрофиллита, ДАН, 1956, 108(5), 933-936.[8]Nickel, E. H., Rowland, J. E., Charette, D. J., Niobophyllite the niobium analogue of astrophyllite: A new mineral from Sead Laxe Labrador, Canad. Mine., 1964, 8(1): 40.[9]X-Ray Laboratory of Hubei Geologic College, The crystal chemistry of astrophyllite group minerals (in Chinese), Scientia Geologica Sinica, 1974, (1): 18-30.[10]Sheldrick, G. M., Program for the solution of crystal structures, SHELX86, University of G?ttingen, 1985, Germany.[11]Sheldrick, G. M., Program for the refinement of crystal structures, SHELXL93, University of G?ttingen, 1993, Germany.[12]Liebau, F., Structural Chemistry of Silicates Structure, Bonding, and Classification, Heidelberg: Springer-Verlag QD181, S6L614, 1985.[13]Ferraris, G., Ivaldi, G., Khomyakov, A. P. et al., Nafertisite, a layer titanosilicate member of a polysomatic series including mica, Eur. J. Mineral.,1996, 8: 241-249.[14]Ferraris, G., Polysomatism as a tool for correlating properties and structure, in EMU Notes in

  14. Robustness of Structural Systems

    DEFF Research Database (Denmark)

    Canisius, T.D.G.; Sørensen, John Dalsgaard; Baker, J.W.

    2007-01-01

    The importance of robustness as a property of structural systems has been recognised following several structural failures, such as that at Ronan Point in 1968,where the consequenceswere deemed unacceptable relative to the initiating damage. A variety of research efforts in the past decades have...... systems. Guidance is provided regarding the assessment of robustness in a framework that considers potential hazards to the system, vulnerability of system components, and failure consequences. Several proposed methods for quantifying robustness are reviewed, and guidelines for robust design...

  15. Safety of Marine Structures

    DEFF Research Database (Denmark)

    Burcharth, H. F.

    1990-01-01

    of a "future safe" design code for exposed marine structures like breakwaters should be different from the ones usually applied in modern design standards for conventional structures within civil engineering. Moreover, results from ongoing development of a design code for rubble mound breakwaters are presented.......Based on the large number of recent failures of major rubble mound breakwaters the paper discusses the experience gained so far and points out the weak spots in our present knowledge. On this base the difficulties in developing design standards are discussed and it is argued that the principles...

  16. Coastal Structures and Barriers 2012

    Data.gov (United States)

    California Department of Resources — This dataset is a compilation of the UCSC Sand Retention Structures, MC Barriers, and USACE Coastal Structures. UCSC Sand Retention Structures originate from a...

  17. System Reliability of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2010-01-01

    For reduction of the risk of collapse in the event of loss of structural element(s), a structural engineer may take necessary steps to design a collapse-resistant structure that is insensitive to accidental circumstances e.g. by incorporating characteristics like redundancy, ties, ductility, key ...... elements, alternate load path(s) etc. in the structural design. In general these characteristics can have a positive influence on system reliability of a structure however, in Eurocodes ductility is only awarded for concrete and steel structures but not for timber structures. It is well......-know that structural systems can redistribute internal forces due to ductility of a connection, i.e. some additional loads can be carried by the structure. The same effect is also possible for reinforced concrete structures and structures of steel. However, for timber structures codes do not award that ductility...

  18. Coastal Structures and Barriers 2012

    Data.gov (United States)

    California Department of Resources — This dataset is a compilation of the UCSC Sand Retention Structures, MC Barriers, and USACE Coastal Structures. UCSC Sand Retention Structures originate from a...

  19. Integrated materials–structural models

    DEFF Research Database (Denmark)

    Stang, Henrik; Geiker, Mette Rica

    2008-01-01

    Reliable service life models for load carrying structures are significant elements in the evaluation of the performance and sustainability of existing and new structures. Furthermore, reliable service life models are prerequisites for the evaluation of the sustainability of maintenance strategies......, repair works and strengthening methods for structures. A very significant part of the infrastructure consists of reinforced concrete structures. Even though reinforced concrete structures typically are very competitive, certain concrete structures suffer from various types of degradation. A framework...

  20. Study of cobalt mononitride thin films prepared using DC and high power impulse magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Rachana, E-mail: dr.rachana.gupta@gmail.com [Institute of Engineering & Technology, DAVV, Khandwa Road, Indore – 452 017 (India); Pandey, Nidhi; Behera, Layanta; Gupta, Mukul [UGC-DAE Consortium for Scientific Research, Khandwa Road, University Campus, Indore-452001 (India)

    2016-05-23

    In this work we studied cobalt mononitride (CoN) thin films deposited using dc magnetron sputtering (dcMS) and high power impulse magnetron sputtering (HiPIMS). A Co target was sputtered using pure N{sub 2} gas alone as the sputtering medium. Obtained long-range structural ordering was studies using x-ray diffraction (XRD), short-range structure using Co L{sub 2,3} and N K absorption edges using soft x-ray absorption spectroscopy (XAS) and the surface morphology using atomic force microscopy (AFM). It was found that HiPIMS deposited films have better long-range ordering, better stoichiometric ratio for mononitride composition and smoother texture as compared to dcMS deposited films. In addition, the thermal stability of HiPIMS deposited CoN film seems to be better. On the basis of different type of plasma conditions generated in HiPIMS and dcMS process, obtained results are presented and discussed.

  1. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    The present paper considers robustness of kinetic structures. Robustness of structures has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. Especially for these types of structural syst...... systems, it is of interest to investigate how robust the structures are, or what happens if a structural element is added to or removed from the original structure. The present paper discusses this issue for kinetic structures in architecture....

  2. Market structures in international telecommunications

    DEFF Research Database (Denmark)

    Henten, Anders

    1998-01-01

    Paper dealing with the internationalisation of telecommunications and the developing market structures.......Paper dealing with the internationalisation of telecommunications and the developing market structures....

  3. Organisational Structures & Considerations

    NARCIS (Netherlands)

    Luiijf, H.A.M.; Healey, J.

    2012-01-01

    The purpose of this section is to review specific types of national cyber security (NCS) areas (also called ‘mandates’) and examine the organisational and collaborative models associated with them. Before discussing the wide variety of organisational structures at the national and international leve

  4. Structure from interaction events

    NARCIS (Netherlands)

    de Nooy, W.

    2015-01-01

    In this contribution to the colloquium, I argue why and how I lost interest in the overall structure of social networks even though Big Data techniques are increasingly simplifying the collection, organisation, and analysis of ever larger networks. The challenge that Big Data techniques pose to the

  5. Teaching concrete structures

    DEFF Research Database (Denmark)

    Goltermann, Per

    2014-01-01

    The teaching of concrete structures has been revised and a number of new approaches have been developed, implemented and evaluated. Inductive teaching, E-learning and “patches” have been found to be improvements and may be an inspiration and help for others development of the teaching and learning...

  6. Nanoscale Turing structures

    DEFF Research Database (Denmark)

    Dziekan, Piotr; Hansen, Jesper Schmidt; Nowakowski, Bogdan

    2014-01-01

    Formation of Turing patterns of nanoscopic length scale is simulated using molecular dynamics. Based on Fourier spectra of the concentrations of species, we compare stabilities of the structures of different wavelengths and for different intermolecular potentials. Long range attraction is shown t...

  7. Capital Structure and Assets

    DEFF Research Database (Denmark)

    Flor, Christian Riis

    2008-01-01

    post optimally sell the assets or re-optimize the capital structure. Ex ante, more uncertain asset value decreases leverage, but not firm value, and selling the assets becomes less likely. Firms should tend to invest in assets whose value is less correlated to changes in earnings and, in addition...

  8. Reliability based structural design

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.

    2014-01-01

    According to ISO 2394, structures shall be designed, constructed and maintained in such a way that they are suited for their use during the design working life in an economic way. To fulfil this requirement one needs insight into the risk and reliability under expected and non-expected actions. A ke

  9. Reliability based structural design

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.

    2013-01-01

    According to ISO 2394, structures shall be designed, constructed and maintained in such a way that they are suited for their use during the design working life in an economic way. To fulfil this requirement one needs insight into the risk and reliability under expected and non-expected actions. A ke

  10. Secondary Structure Switch

    Science.gov (United States)

    King, Angela G.

    2006-01-01

    Neurogenerative diseases like Alzheimer's disease and Parkinson's disease involve a transformation between two peptide and protein structures of alpha-helices and beta-sheets, where the peptide backbone can also participate in metal ion binding in addition to histidine residues. However, the complete absence of change in conformation of Coiled…

  11. Structure - materials - production

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders; Gammel, Peder; Busch, Jens

    2002-01-01

    For the last six years th Aarhus School of Architecture has introduced the first year students (there are about 200 students admitted each year) to structure, materials, design and production through a five week course in collaboration with a group of local companies....

  12. The Structure of Pectin

    Energy Technology Data Exchange (ETDEWEB)

    Mort, Andrew [Oklahoma State Univ., Stillwater, OK (United States). Dept. of Biochemistry and Molecular Biology

    2017-01-12

    At the beginning of this project we hypothesized that pectin, which is a major polysaccharide in primary plant cell walls, is composed of various distinct structural regions covalently linked together into a high molecular weight complex polymer. We also hypothesized that a considerable portion of xyloglucan, the major hemicellulose in most primary cell walls, is linked to the pectin. Our goal was to determine if these interconnections exist and to characterize the exact nature of the interactions. It seems imperative that we have a complete knowledge of the structure of pectin to be able to propose realistic models of cell walls. There is a lot of interest in the biosynthesis of pectin. I do not think it will be possible to completely understand the biosynthesis of pectin without knowing the structure of pectin and thus the sequence of reactions needed to put each sugar or ester in its correct position in the polymer. We made considerable progress in determining the detailed structure of pectin and within a year or so will be able to put forward a comprehensive model of it.

  13. Large, Easily Deployable Structures

    Science.gov (United States)

    Agan, W. E.

    1983-01-01

    Study of concepts for large space structures will interest those designing scaffolding, radio towers, rescue equipment, and prefabricated shelters. Double-fold, double-cell module was selected for further design and for zero gravity testing. Concept is viable for deployment by humans outside space vehicle as well as by remotely operated manipulator.

  14. Inequalities in network structures

    NARCIS (Netherlands)

    Whitmeyer, Joseph M.; Wittek, Rafael

    We use a model of continuous attachments in networks to generate propositions concerning inequalities in network structures, and test the propositions on data from organizational settings. Our network model, inspired by that of [Gould, Roger 2002. The origins of status hierarchies: A formal theory

  15. Mining Structured Data

    NARCIS (Netherlands)

    Nijssen, Siegfried Gerardus Remius

    2006-01-01

    Many databases do not consist of a single table of fixed dimensions, but of objects that are related to each other: the databases are relational, or structured. We study the discovery of patterns in such data. In our approach, a data analyst specifies constraints on patterns that she believes to be

  16. Land, Structure & Depreciation

    NARCIS (Netherlands)

    M. Francke; A. van de Minne

    2013-01-01

    We introduce a hedonic price model which enables us to disentangle the value of a residential property into the value of land and the value of structure, while controlling for depreciation and vintage effects. For given reconstruction costs we are able to estimate the impact of physical depreciation

  17. Visual Narrative Structure

    Science.gov (United States)

    Cohn, Neil

    2013-01-01

    Narratives are an integral part of human expression. In the graphic form, they range from cave paintings to Egyptian hieroglyphics, from the Bayeux Tapestry to modern day comic books (Kunzle, 1973; McCloud, 1993). Yet not much research has addressed the structure and comprehension of narrative images, for example, how do people create meaning out…

  18. Structured Programming: An Introduction.

    Science.gov (United States)

    Moulton, Peter

    Designed for use by computer programming teachers, this booklet presents the concepts of structured programming and provides examples of how to implement this methodology, which provides a systematic way of organizing programs so that even large and complex programs are easier to understand and modify than unstructured programs. After a brief…

  19. Structural Equation Model Trees

    Science.gov (United States)

    Brandmaier, Andreas M.; von Oertzen, Timo; McArdle, John J.; Lindenberger, Ulman

    2013-01-01

    In the behavioral and social sciences, structural equation models (SEMs) have become widely accepted as a modeling tool for the relation between latent and observed variables. SEMs can be seen as a unification of several multivariate analysis techniques. SEM Trees combine the strengths of SEMs and the decision tree paradigm by building tree…

  20. Air Structures: Inflatable Alternatives

    Science.gov (United States)

    Valerio, Joseph M.; And Others

    1973-01-01

    Describes and evaluates several avant garde'' examples of air structures. Included are a soft'' child's playpen, a pneudome that employs a water ballast for anchoring, a one-acre enclosed campus, an instant city'' constructed for an industrial design conference, and the Fuji Pavilion, at Expo '70 in Osaka, Japan, that was large enough to cover…

  1. Structuring the Information Gap.

    Science.gov (United States)

    Edge, Julian

    1984-01-01

    Describes an information gap procedure to teach a new structure which requires students to look for and exchange information in order to complete a task in an English as a second language class. Illustrates the method with a set of materials and suggests ways for teachers to produce similar materials. (SED)

  2. Whence Structured Propositions?

    Science.gov (United States)

    Keller, Lorraine Juliano

    2012-01-01

    This thesis is a critical examination of "Structured Propositionalism" (SP), the view that propositions are complex entities composed of the semantic values of the (meaningful) parts of the sentences that express them. According to SP, propositions have constituents and are individuated by the identity and arrangement of their…

  3. Hybrid composite laminate structures

    Science.gov (United States)

    Chamis, C. C.; Lark, R. F. (Inventor)

    1977-01-01

    An invention which relates to laminate structures and specifically to essentially anisotropic fiber composite laminates is described. Metal foils are selectively disposed within the laminate to produce increased resistance to high velocity impact, fracture, surface erosion, and other stresses within the laminate.

  4. Manipulating Combinatorial Structures.

    Science.gov (United States)

    Labelle, Gilbert

    This set of transparencies shows how the manipulation of combinatorial structures in the context of modern combinatorics can easily lead to interesting teaching and learning activities at every level of education from elementary school to university. The transparencies describe: (1) the importance and relations of combinatorics to science and…

  5. Corporate strategies: organizational structure.

    Science.gov (United States)

    Howe, R C; Oestreicher, V

    1988-06-01

    In previous installments of this series, the authors outlined factors that influence corporation information system strategies. The factor that appears to be most significant is centralization vs. decentralization. This article presents examples of organizational structures, roles and responsibilities for either approach.

  6. Unsupervised Knowledge Structuring

    DEFF Research Database (Denmark)

    Kano Glückstad, Fumiko; Herlau, Tue; Schmidt, Mikkel N.;

    2013-01-01

    This work presents a conceptual framework for learning an ontological structure of domain knowledge, which combines Jaccard similarity coefficient with the Infinite Relational Model (IRM) by (Kemp et al. 2006) and its extended model, i.e. the normal-Infinite Relational Model (n-IRM) by (Herlau et...

  7. Multilevel distributed structure optimization

    NARCIS (Netherlands)

    Entzinger, J.O.; Spallino, R.; Ruijter, W.

    2003-01-01

    An iterative optimisation routine for aircraft structures using Genetic Algorithms (GAs) and Neural Networks (NNs) is presented. In this setup the NNs form a response surface, approximating the key mechanical properties of substructures. NNs are updated every iteration. The GA uses these NNs in the

  8. Reforming Organizational Structures

    NARCIS (Netherlands)

    S.G.J. Van de Walle (Steven)

    2016-01-01

    textabstractPublic sectors have undergone major transformations. Public sector reform touches upon the core building blocks of the public sector: organizational structures, people and finances. These are objects of reform. This chapter presents and discusses a set of major transformations with

  9. Probabilistic Structural Analysis Program

    Science.gov (United States)

    Pai, Shantaram S.; Chamis, Christos C.; Murthy, Pappu L. N.; Stefko, George L.; Riha, David S.; Thacker, Ben H.; Nagpal, Vinod K.; Mital, Subodh K.

    2010-01-01

    NASA/NESSUS 6.2c is a general-purpose, probabilistic analysis program that computes probability of failure and probabilistic sensitivity measures of engineered systems. Because NASA/NESSUS uses highly computationally efficient and accurate analysis techniques, probabilistic solutions can be obtained even for extremely large and complex models. Once the probabilistic response is quantified, the results can be used to support risk-informed decisions regarding reliability for safety-critical and one-of-a-kind systems, as well as for maintaining a level of quality while reducing manufacturing costs for larger-quantity products. NASA/NESSUS has been successfully applied to a diverse range of problems in aerospace, gas turbine engines, biomechanics, pipelines, defense, weaponry, and infrastructure. This program combines state-of-the-art probabilistic algorithms with general-purpose structural analysis and lifting methods to compute the probabilistic response and reliability of engineered structures. Uncertainties in load, material properties, geometry, boundary conditions, and initial conditions can be simulated. The structural analysis methods include non-linear finite-element methods, heat-transfer analysis, polymer/ceramic matrix composite analysis, monolithic (conventional metallic) materials life-prediction methodologies, boundary element methods, and user-written subroutines. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. NASA/NESSUS 6.2c is structured in a modular format with 15 elements.

  10. GKZ Hypergeometric Structures

    NARCIS (Netherlands)

    Stienstra, J.

    2007-01-01

    This text is based on lectures by the author in the Summer School Algebraic Geometry and Hypergeometric Functions in Istanbul in June 2005. It gives a review of some of the basic aspects of the theory of hypergeometric structures of Gelfand, Kapranov and Zelevinsky, including Differential Equations,

  11. Cell Structure Study.

    Science.gov (United States)

    Ekstrom, James V.

    2000-01-01

    Presents an activity in which students use microscopes and digital images to examine Elodea, a fresh water plant, before and after the process of plasmolysis, identify plant cellular structures before and after plasmolysis, and calculate the size of the plant's vacuole. (ASK)

  12. Silicon Betavoltaic Batteries Structures

    Directory of Open Access Journals (Sweden)

    V.N. Murashev

    2015-12-01

    Full Text Available For low-power miniature energy creation sources the particular interest is nickel Ni63. This paper discusses the main types of betavoltaic battery structures with the prospects for industrial application using - isotope of nickel Ni63. It is shown that the prospects for improving the effective efficiency are planar multijunction betavoltaic batteries.

  13. Magnetic Structure of Erbium

    DEFF Research Database (Denmark)

    Gibbs, D.; Bohr, Jakob; Axe, J. D.

    1986-01-01

    , and at positions split symmetrically about the fundamental. As the temperature is lowered below 52 K the charge and magnetic scattering display a sequence of lock-in transitions to rational wave vectors. A spin-slip description of the magnetic structure is presented which explains the wave vectors...

  14. Space-time structure

    CERN Document Server

    Schrödinger, Erwin

    1985-01-01

    In response to repeated requests this classic book on space-time structure by Professor Erwin Schrödinger is now available in the Cambridge Science Classics series. First published in 1950, and reprinted in 1954 and 1960, this lucid and profound exposition of Einstein's 1915 theory of gravitation still provides valuable reading for students and research workers in the field.

  15. Verification of ceramic structures

    NARCIS (Netherlands)

    Behar-Lafenetre, S.; Cornillon, L.; Rancurel, M.; Graaf, D. de; Hartmann, P.; Coe, G.; Laine, B.

    2012-01-01

    In the framework of the "Mechanical Design and Verification Methodologies for Ceramic Structures" contract [1] awarded by ESA, Thales Alenia Space has investigated literature and practices in affiliated industries to propose a methodological guideline for verification of ceramic spacecraft and instr

  16. Structured Mechanical Collage.

    Science.gov (United States)

    Huang, Zhe; Wang, Jiang; Fu, Hongbo; Lau, Rynson W H

    2014-07-01

    We present a method to build 3D structured mechanical collages consisting of numerous elements from the database given artist-designed proxy models. The construction is guided by some graphic design principles, namely unity, variety and contrast. Our results are visually more pleasing than previous works as confirmed by a user study.

  17. Information Structure: Afterword

    Directory of Open Access Journals (Sweden)

    Craige Roberts

    2012-12-01

    Full Text Available This is the afterword to the 2012 republication of "Information structure in discourse: Towards an integrated formal theory of pragmatics". See also the annotated bibliography on related topics at http://www.ling.ohio-state.edu/~croberts/QUDbib/. http://dx.doi.org/10.3765/sp.5.7 BibTeX info

  18. Inequalities in network structures

    NARCIS (Netherlands)

    Whitmeyer, Joseph M.; Wittek, Rafael

    2010-01-01

    We use a model of continuous attachments in networks to generate propositions concerning inequalities in network structures, and test the propositions on data from organizational settings. Our network model, inspired by that of [Gould, Roger 2002. The origins of status hierarchies: A formal theory a

  19. Communications Policies and Structures.

    Science.gov (United States)

    Pigeat, Henri; And Others

    These two papers discuss communications policies and structures in France and in the United States. The first paper reports that efforts to develop new electronic communication systems in France are hindered by rivalry between two public monopolies and by governmental protection against foreign influence. The second paper assesses ownership of…

  20. Capital Structure and Assets

    DEFF Research Database (Denmark)

    Flor, Christian Riis

    2008-01-01

    post optimally sell the assets or re-optimize the capital structure. Ex ante, more uncertain asset value decreases leverage, but not firm value, and selling the assets becomes less likely. Firms should tend to invest in assets whose value is less correlated to changes in earnings and, in addition...