WorldWideScience

Sample records for photovoltaische anlagen leitfaden

  1. Photovoltaic systems. A guide for electricians, roofers, projecting engineers and architects; Photovoltaische Anlagen. Leitfaden fuer Elektriker, Dachdecker, Fachplaner, Architekten und Bauherren

    Energy Technology Data Exchange (ETDEWEB)

    Haselhuhn, R.; Berger, F.; Hasenoehrl, G.; Morsch, R.; Quaschning, V.; Rauscher, S.; Seltmann, T.; Hartmann, U.

    2001-07-01

    can-polluting and sustainable power supply will rely heavily on photovoltaic systems. Experience has shown that the development of PV systems cannot be assured without careful, high-quality planning dimensioning, installation, commissioning and maintenance. This guide contains comprehensive information on all aspects of PV systems. It addresses architects, projecting engineers, builder-owners, electricians and roofers, as well as decision-makers on state and community level with the intention of informing them on the latest state of the art. Contents: 1. Functional principles, design, characteristics and properties of components, modules and current inverters; 2. in situ analysis and site analysis; 3. shading analysis; 4. Optimal planning, dimensioning and design; 5. simulation programmes; 6. installation, commissioning, failure detection and maintenance; 7. assembly systems and integration options; 8. funding programmes. To facilitate updating, the book is in the form of a loose-leaf collection. [German] Fuer eine klimavertraegliche und nachhaltige zukuenftige Energieversorgung Deutschlands ist der massive Ausbau der Photovoltaik unabdingbar. Die Rahmenbedingungen fuer einen solchen Ausbau sind geschaffen, der Markt befindet sich zur Zeit im Umbruch. In Deutschland werden von einem solchen Ausbau in erster Linie netzgekoppelte PV-Anlagen betroffen sein. Die Erfahrungen mit der Performance solcher Anlagen (1.000-Daecher-Programm, Programm Sonne in der Schule, Schweizer Foerderprogramm etc.) haben allerdings gezeigt, dass ohne eine sorgfaeltige und auf hohem Niveau stehende Planung, Dimensionierung, Installation, Inbetriebnahme und Wartung der optimale Ertrag und damit der Beitrag zum Klimaschutz nicht gewaehrleistet werden kann. Aus diesen Gruenden ist es notwendig und sinnvill, Architekten, Planern, Bauherren, Installationsbetrieben (sowohl Elektrikern als auch Dachdeckern) und last but not least den Entscheidungstraegern in Laendern und Kommunen ein

  2. Manual of low-capacity bioenergy systems; Handbuch Bioenergie-Kleinanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, H. (ed.); Thuneke, K.; Hoeldrich, A.; Rossmann, P.; Meier, L.; Eismann, H.; Nielsen, H.

    2003-02-01

    The manual attempts a systematic presentation of the current knowledge on the use of biogenic fuels in low-capacity systems. Fundamental and complex technical knowledge is presented in a simple and popular manner, and technical, organisational, economic and legal problems relating to practical application are presented with a view to practical application. This makes the book interesting as a projecting and decision aid for private and public decision-makers. The book addresses private households, small industries, planners and architects, fuel producers and retailers, private and public consultants, and others. (orig.) [German] Im vorliegenden Leitfaden wird versucht, das Wissen ueber den Einsatz biogener Brennstoffe in kleineren Anlagen zu systematisieren und aufzubereiten. Dabei wird der Versuch unternommen, einerseits grundlegende, zum Teil komplexe Zusammenhaenge allgemein verstaendlich darzustellen und andererseits anwendungsbezogene technische, organisatorische, wirtschaftliche und rechtliche Fragen umfassend zu beantworten. Dadurch kann der Leitfaden als Projektierungs- und Ausfuehrungshilfe fuer die am Prozess der Brennstoffbereitstellung und -nutzung beteiligten Akteure aber auch fuer die beratenden oeffentlichen und privaten Einrichtungen dienen. Im Einzelnen soll der Leitfaden - Interesse an der Realisierung eigener Projektideen fuer die Biomassenutzung wecken, - die Beurteilung eigener Spielraeume fuer die Biomassenutzung erleichtern, - Basiswissen vermitteln, - einen Ueberblick ueber die technischen Moeglichkeiten im Bereich kleiner Anlagen geben, - Hilfestellung bei der Bewertung von biogenen Brennstoffen und ihren Einsatzmoeglichkeiten bieten, - die Systemauswahl und -konfiguration erleichtern, - Sicherheit im Umgang mit den Fachbegriffen vermitteln, - die rechtlichen Rahmenbedingungen vorstellen, - Planungsdaten liefern und Fehleinschaetzungen vermeiden helfen, - Verbesserungsmoeglichkeiten an bereits existierenden Anlagen aufzeigen, - die

  3. Manual: environmental impact statement and intervention regulation; Leitfaden Umweltvertraeglichkeitspruefung und Eingriffsregelung

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, K

    1993-12-31

    In order to be able to fulfil also legally the important tasks of environmental protection and natural preservation in the last ten years numerous legal provisions have been issued. Many of these laws require that the environmental impact of projects and constructional measures is taken into account to a higher degree. Two important instruments in this connection are the impact statement and the intervention regulation of natural preservation. Their importance and consequences for the planning and realization of projects are until now not sufficiently know. This manual is to fill this gap. This booklet shall help builder-owners and investors to realize their building projects in a way which is compatible with the environment. For architects and planners information is given in this manual about the requirements to be fulfilled in the individual planning and licensing procedures. The booklet is structured in a way that builder-owners, consultants and authorities find quickly the information needed. (orig./KW) [Deutsch] Um die wichtigen Aufgaben des Umwelt- und Naturschutzgesetzes auch rechtlich zu bewaeltigen, sind in den letzten Jahren eine Vielzahl von Rechtsvorschriften erlassen worden. Zahlreiche dieser Gesetze erfordern, dass kuenftig Umwelt- und Naturschutzbelange bei Planungen und Baumassnahmen staerker beruecksichtigt werden. Zwei wesentliche Instrumente dafuer sind die Umweltvertraeglichkeitspruefung (UVP) und die naturschutzrechtliche Eingriffsregelung. Ihre Bedeutung und die sich daraus ergebenden Konsequenzen fuer die Planung und Ausfuehrung von Vorhaben sind bislang allerdings noch nicht hinreichend bekannt. Diese Luecke soll der vorliegende Leitfaden schliessen helfen. Bauherren und Investoren sollen mit dieser Broschuere informiert werden, wie sie ihr geplantes Bauvorhaben umweltvertraeglich realisieren koennen. Architekten und Planer koennen durch diesen Leitfaden erfahren, welche Leistungen in den einzelnen Planungs- und Genehmigungsverfahren zu

  4. L E E guide on electric power supply in high rise buildings. tot. rev. ed.; L E E. Leitfaden Elektrische Energie im Hochbau

    Energy Technology Data Exchange (ETDEWEB)

    Hennings, D.; Hinz, E.; Steinmueller, B.; Grossklos, M.

    2000-07-01

    Energy policy aiming at sustainability must take account of the noxious effects of fossil fuels. This guide will help to solve this problem. It is an easy to handle tool for integral planning and optimisation of electric power supply in administrative and office buildings, with a standard projecting procedure, a method for improving electric systems in buildings on the basis of characteristic values, and hints for planning and optimisation. It addresses builder owners and investors as well as architects, planners, engineers and energy consultants all of whom may be concerned in the planning of a building and its technical facilities. [German] Eine am Ziel der Nachhaltigkeit orientierte Energiepolitik muss Konsequenzen draus ziehen, dass der Einsatz der fossilen Energietraeger, auf denen unsere Energieversorgung bisher basiert, mit schaedlichen Umweltauswirkungen verbunden ist. Kohlendioxid und andere klimarelevante Spurengase heizen die Erdatmosphaere auf und drohen zur Klimakatastrophe zu fuehren; Stickoxid und Schwefeldioxid belasten mit dem sauren Regen Boden, Gewaesser und ganze Oekosysteme. Der vorliegende Leitfaden 'Elektrische Energie im Hochbau' will hier Abhilfe schaffen. Er stellt ein gut zu handhabendes Werkzeug dar, mit dessen Hilfe eine integrale Planung und Optimierung des rationellen Einsatzes elektrischer Energie in Dienstleistungsgebaeuden moeglich ist. Inhalte des Leitfadens sind die Darstellung des Planungsablaufs, ein Kennwertverfahren zur Verwertung und Verbesserung von elektrischen Anwendungen im Gebaeudebereich als Massnahme zur Investitions- und Betriebskostenreduzierung sowie Hinweise fuer Planung und Optimierung. Der Leitfaden richtet sich sowohl an die Bauherren bzw. Investoren als auch die an der Gebaeude- und Technikplanung Beteiligten, also die Architekten, Planer, Ingenieure und Energieberater. (orig.)

  5. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2013/14

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-02-15

    The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

  6. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011; Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Jahresbericht 2010/2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

  7. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2013/14

    International Nuclear Information System (INIS)

    2016-02-01

    The annual report 2013/14 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) includes projects and key activities on the following issues: reactor safety, waste disposal, radiation protection, environmental protection and the support of foreign authorities and TSO. The project executing organizations, the governmental funding, share holding and subsidiaries are summarized.

  8. Modernisation of space HVAC systems with high energy consumption; Sanierung von RLT-Anlagen mit hohen Energieverbraeuchen

    Energy Technology Data Exchange (ETDEWEB)

    Willan, U. [ROM (Rud. Otto Meyer) - Technik fuer Mensch und Umwelt, Hamburg (Germany). Zentralbereich Ingenieurtechnik

    1997-12-31

    For office buildings and similarly used buildings, concepts are developed for the modernization of space hvac systems. The state of work in the following sectors is discussed: optimum comparison processes for space HVAC systems, measurements to assess the performance of alternative dehumidification and cooling systems, heat-physiological space model. (MSK) [Deutsch] Fuer Buerobauten und Gebaeude aehnlicher Nutzung werden Sanierungskonzepte fuer RLT-Anlagen erarbeitet. Im Folgenden wird der Stand der Arbeiten in den Bereichen: optimale Vergleichsprozesse fuer RLT-Anlagen, messtechnische Beurteilung alternativer Entfeuchtungs- und Kuehlsysteme sowie ein waermetechnisches Raummodell erlaeutert.

  9. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 2010/2011

    International Nuclear Information System (INIS)

    2011-01-01

    The annual report 2010/11 of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) covers the following topics: organization, corporate development and public relations; reactor accident in Fukushima; Projects and work priorities (reactor safety; waste management; radiation and environmental protection; international projects); project management and project support; equity participations and subsidiaries (RISKAUDIT IRSN/GRS International; institute for safety technologies (ISTec), European Nuclear Safety Training and Tutoring Institute (ENSTTI)).

  10. Guide to the construction of small-scale hydropower plants; 2. ed.; Leitfaden fuer den Bau von Kleinwasserkraftanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Berg, W.; Giesecke, J.; Grabitz, R.; Haakh, F.; Haury, H.G.; Horlacher, H.B.; Hutarew, A.; Latrille, W.; Mackert, W.; Mueller, P.; Sauer, K.; Schmid, H.; Schweickert, H.; Waller, H.

    1994-12-31

    Hydropower plays a prominent role in Baden-Wuerttemberg`s policy of promoting the use of renewable energy resources. This is due, firstly, to the fact that hydropower is a reliable, proven technology, and secondly to the favourable topographic and hydrological conditions Baden-Wuerttemberg offers for the development of hydropower. The Baden-Wuerttembergian Water Management Association hopes that this guide will provide the interested reader with sufficient information for assessing or initiating concrete projects. The individual chapters have been adapted from papers of the team of authors referred to in the foreword. They are largely representative of the Federal German Republic (Baden-Wuerttemberg). The guide thus provides a complement to the Manual of the International Electrotechnical Commission, the first German translation of which is contained in chapter 3. As this manual is required to be valid worldwide, it must necessarily be confined to technical and process organisational matters. The editors have been at pains t provide a concrete, practice-oriented rather than a textbook-like presentation of the subject. The Water Management Association and the authors hope that this guide will stimulate public interest in the continued development of small-scale hydropower plants in compliance with energy-political, private-economical, and ecological requirements. (orig.) [Deutsch] Die Wasserkraft nimmt im Hinblick auf eine staerkere Hinwendung zu regenerativen Energiequellen eine Vorreiterstellung in Baden-Wuerttemberg ein. Dies liegt in der zuverlaessigen und erprobten Technologie begruendet und in den guenstigen topographischen und hydrologischen Voraussetzungen fuer die Wasserkraftnutzung in Baden-Wuerttemberg. Der Wasserwirtschaftsverband Baden-Wuerttemberg hofft, mit dem `Leitfaden` den Interessenten genuegend Informationen an die Hand gegeben zu haben, die zur Beurteilung und gegebenenfalls zur Inangriffnahme eines konkreten Projektes erforderlich sind. Die

  11. Rationality and contradictions in the competition for concessions. A (second) contribution to the Joint Practical Guide of the German Federal Cartel Office and Federal Network Agency for the allocation of electricity and gas concession tolerated and to change the concessionaire of 21 May 2015; Rationalitaet und Widersprueche im Wettbewerb um Konzessionen. Ein (zweiter) Beitrag zum Gemeinsamen Leitfaden von Bundeskartellamt und Bundesnetzagentur zur Vergabe von Strom- und Gaskonzessionsvertraegen und zum Wechsel des Konzessionsnehmers vom 21. Mai 2015

    Energy Technology Data Exchange (ETDEWEB)

    Steinbeck, David; Templin, Wolf [Boos Hummel und Wegerich Rechtsanwaelte, Berlin (Germany)

    2015-08-15

    This article follows to an essay in the ZNER of 2011 (S. 121 et seq.) for the first Joint Practical Guide of the Federal Network Agency (BNetzA) and Federal Cartel Office (FCO) from the year 2010, in which the authors had attested authorities a good ''step towards to more competition ''. In the essay is examined and shown that the Joint practical guide from the year 2010 this target could meet and what effect the now in its second edition newly revised guidelines on competition to distribution networks may have. The revision of the guidelines will be given to municipalities further action assistance to the hand, but - with few exceptions - only reproduces the jurisprudence of the staked legal framework. One proposed solution for the more diverse existing problems remains undone, whereas new problem areas are put up in several places. Nevertheless, the will of the authorities is to recognize, to avoid legal problems in the concession process and net acquisitions from the outset. [German] Dieser Beitrag knuepft an einen Aufsatz in der ZNER 2011 (S. 121 ff.) zum ersten Gemeinsamen Leitfaden von Bundesnetzagentur (BNetzA) und Bundeskartellamt (BKartA) aus dem Jahre 2010 an, in dem die Autoren den Behoerden einen richtigen ''Schritt hin zu mehr Wettbewerb'' attestiert hatten. In der Abhandlung wird untersucht und dargestellt, ob der Gemeinsame Leitfaden aus dem Jahr 2010 diesem Ziel gerecht werden konnte und welche Auswirkungen der nunmehr in der zweiten Auflage neu ueberarbeitete Leitfaden auf den Wettbewerb um Verteilnetze haben kann. Die Ueberarbeitung des Leitfadens wird den Kommunen eine weitere Handlungshilfe an die Hand gegeben, die aber - bis auf wenige Ausnahmen - den durch die Rechtsprechung abgesteckten Rechtsrahmen nur wiedergibt. Ein Loesungsvorschlag fuer die noch vielfaeltig bestehenden Probleme unterbleibt, wohingegen an mehreren Stellen neue Problemfelder aufgemacht werden. Gleichwohl ist der Wille der Behoerden

  12. Using continuous UV extinction measurements to monitor and control the aerated phase of sequencing batch reactors; Einsatz der kontinuierlichen UV-Extinktionsmessung fuer die Ueberwachung und Regelung der Belueftungsphase in SBR-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Nicolet, L.; Rott, U. [Stuttgart Univ. (Germany). Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft; Bardeck, S. [Optek-Danulat GmbH (Germany)

    1999-07-01

    The work describes the measurement of UV extinction - expressed as the spectral absorption coefficient SAC - at a randomly chosen wave length as a technique for monitoring organic load in effluents from sequencing batch reactors (SBR) at municipal and industrial waste water treatment plants. Further described is to what extent the continuous determination of the SAC can be used in practice for the control of the aerated phase of sequencing batch reactors. By this means, process stabilization and optimization can be achieved and operating reliability can be enhanced. (orig.) [German] Inhalt dieses Beitrages ist es, die Messung der UV-Extinktion - ausgedrueckt durch den spektralen Absorptionskoeffizient (SAK) - bei einer frei gewaehlten Wellenlaenge als Verfahren fuer die Ueberwachung der organischen Belastung in den Ablaeufen von SBR-Anlagen (Sequencing-Batch-Reactor) in der kommunalen und industriellen Abwasserreinigung vorzustellen. Weiterhin soll dargestellt werden, in wieweit die kontinuierliche Bestimmung des SAK in der Praxis fuer die Regelung der beluefteten Phase von SBR-Anlagen eingesetzt werden kann. Hiermit kann eine Prozessstabilisierung und -optimierung der Anlagen erreicht sowie die Betriebssicherheit erhoeht werden. (orig.)

  13. Die spezifischen Eigenschaften der von Hochspannungsfreileitungen und -anlagen verursachten Funkstörungen; Teil 1: Beschreibung der physikalischen Vorgänge; Identisch mit Publikation CISPR 60018-1, Ausgabe 1982

    CERN Document Server

    Deutsches Institut für Normung. Berlin

    1986-01-01

    Die spezifischen Eigenschaften der von Hochspannungsfreileitungen und -anlagen verursachten Funkstörungen; Teil 1: Beschreibung der physikalischen Vorgänge; Identisch mit Publikation CISPR 60018-1, Ausgabe 1982

  14. Comparative study of cogasification and co-combustion of communal sewage sludge in brown coal fuelled plants; Vergleich der Mitvergasung und Mitverbrennung kommunaler Klaerschlaemme in braunkohlegefeuerten Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schiffer, H P; Bierbaum, K; Adlhoch, W; Thomas, G [Rheinbraun AG, Koeln (Germany)

    1997-12-31

    Co-combustion and cogasification of sewage sludge in brown coal fuelled plants are compared, and an economic assessment is made. (ABI) [Deutsch] Die Mitverbrennung und Mitvergasung von Klaerschlamm in braunkohlegefeuerten Anlagen werden verglichen und auf ihre Wirtschaftlichkeit hin untersucht. (ABI)

  15. Comparative study of cogasification and co-combustion of communal sewage sludge in brown coal fuelled plants; Vergleich der Mitvergasung und Mitverbrennung kommunaler Klaerschlaemme in braunkohlegefeuerten Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schiffer, H.P.; Bierbaum, K.; Adlhoch, W.; Thomas, G. [Rheinbraun AG, Koeln (Germany)

    1996-12-31

    Co-combustion and cogasification of sewage sludge in brown coal fuelled plants are compared, and an economic assessment is made. (ABI) [Deutsch] Die Mitverbrennung und Mitvergasung von Klaerschlamm in braunkohlegefeuerten Anlagen werden verglichen und auf ihre Wirtschaftlichkeit hin untersucht. (ABI)

  16. Analytical evaluation of the operation data from selected PV-demonstration systems in the MuD-programme. Final report; Analytische Auswertung der Messergebnisse von ausgewaehlten PV-Demonstrationsanlagen im MuD-Programm. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Gabler, H. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Heinemann, D. [Oldenburg Univ. (Germany). Fachbereich 8 - Physik; Wiemken, E. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany)

    1996-02-01

    From several PV-demonstration programmes, real performance data and the range in utilizing the systems are obtained. Nevertheless, for a particular system, no precise assessment and interpretation of the real system behaviour can be given: The quantification and the separation of the avoidable and of the unavoidable energy losses in the system is not to perform from the monitored data alone. Aim of this project was the interpretation of real operation data of PV-systems, the calculation of all steps of energy conversion and hence the determination of the energy losses in particular PV-systems as well as the presentation of a measure for energy production and system performance. This task includes a brief survey of the optimization potential of the energetic performance. The method choosen was an energy flow analysis, carried out on selected demonstration plants of the MuD-programme. For this reason, detailed simulation models were used. The results of the simulation calculations gives the measure to interprete the monitored system performance. In the course of the project, the analytical evaluation has shown a large ability in the assessment and interpretation of real system perforamances. Since the concept of the evaluation is transferable to many PV-systems, it represents a base for further applications in this field and in the field of the online-system control of PV-plants. (orig.) [Deutsch] In verschiedenen Demonstrationsprogrammen werden aus Langzeitmessungen Groessenordnung und Spannbreite der Nutzungsgrade photovoltaischer Anlagen ermittelt. Fuer eine spezifische Anlage ist damit jedoch keine praezise Einschaetzung bzw. Interpretation des Systemverhaltens moeglich, da die Quantifizierung der unvermeidbaren und der vermeidbaren Energieverluste im System nicht aus den Messdaten allein erfolgen kann. Ziel dieses Projektes war die Interpretation des reellen Betriebs von PV-Anlagen, die Berechnung der Zusammensetzung und der Bandbreite der Energieverluste im

  17. Die nuklearen Anlagen von Hanford (1943-1987) Eine Fallstudie über die Schnittstellen von Physik, Biologie und die US-amerikanische Gesellschaft zur Zeit des Kalten Krieges

    Science.gov (United States)

    Macuglia, Daniele

    Die Geschichte des Kalten Krieges eröffnet viele Möglichkeiten, sich näher mit den Schnittstellen von Physik und Biologie während des 20. Jahrhunderts zu befassen. Nicht nur das Unglück in Tschernobyl aus dem Jahr 1986, auch das Beispiel der nuklearen Anlagen in Hanford in den Vereinigten Staaten zeigt die biologischen Folgen von nuklearer Physik.

  18. Deregulation in the field of decommissioning and dismantling of nuclear facilities. Legal frame conditions and regulations in the field of nuclear engineering; Deregulierung bei der Stillegung und Beseitigung nuklearer Anlagen; Rechtliche Rahmenbedingungen und kerntechnisches Regelwerk

    Energy Technology Data Exchange (ETDEWEB)

    Kurz, A [Kernforschungszentrum Karlsruhe GmbH (Germany). Vorstandsbereich 2 - Neue Technologien und Grundlagenforschung; Baumgaertel, G [Kernforschungszentrum Karlsruhe GmbH (Germany). Koordinationsstelle Genehmigungsverfahren (KGV)

    1994-05-01

    The report comprises two articles covering current topics of the decommissioning and dismantling of nuclear facilities. In the first article written by Kurz, the legal standards are listed together with conclusions and proposals regarding their implementation for the further development of this field of law. The article by Baumgaertel is aimed at evaluating the regulations governing nuclear technology as regards their applicability to the decommissioning and dismantling of nuclear facilities. These articles shall contribute to the discussions taking place in this field at the moment. As a result, an appropriate and project-specific application of the legal provisions and not legally binding (technical) regulations in the field of nuclear technology (deregulation) in the licensing procedures required for the decommissioning and dismantling of nuclear facilities is requested by the authors. (orig.) [Deutsch] Der Bericht enthaelt zwei Ausarbeitungen zu aktuellen Themenstellungen der Stillegung und Beseitigung nuklearer Anlagen. Der Bericht von Kurz beinhaltet eine thesenartige Auflistung der normativen Voraussetzungen mit Schlussfolgerungen und Umsetzungsvorschlaegen zur Weiterentwicklung dieses Rechtsgebietes; die Ausarbeitung von Baumgaertel beinhaltet eine wertende Durchsicht des kerntechnischen Regelwerkes im Hinblick auf die Anwendbarkeit bei der Stillegung und Beseitigung nuklearer Anlagen. Die Ausarbeitungen dienen als Beitrag zur aktuellen Diskussion in diesem Themenfeld. Im Ergebnis fordern die Autoren die angemessene, vorhabensspezifische Anwendung der rechtlichen Voraussetzungen des kerntechnischen Regelwerkes (Deregulierung) in den zur Stillegung und Beseitigung nuklearer Anlagen erforderlichen Genehmigungsverfahren. (orig.)

  19. A new member of the GM130 golgin subfamily is expressed in the optic lobe anlagen of the metamorphosing brain of Manduca sexta

    Directory of Open Access Journals (Sweden)

    Chiou-Miin Wang

    2003-12-01

    Full Text Available During metamorphosis of the insect brain, the optic lobe anlagen generate the proliferation centers for the visual cortices. We show here that, in the moth Manduca sexta, an 80 kDa Golgi complex protein (Ms-golgin80 is abundantly expressed in the cytoplasm of neuroblasts and ganglion mother cells in the optic lobe anlagen and proliferation centers. The predicted amino acid sequence for Ms-golgin80 is similar to that of several members of the GM130 subfamily of Golgi-associated proteins, including rat GM130 and human golgin-95. Homologs of Ms-golgin80 from Drosophila melanogaster, Caenorhabditis elegans, and Brugia malayi were identified through homology sequence search. Sequence similarities are present in three regions: the N-terminus, an internal domain of 89 amino acids, and another domain of 89 amino acids near the C-terminus. Structural similarities further suggest that these molecules play the same cellular role as GM130. GM130 is involved in the docking and fusion of coatomer (COP I coated vesicles to the Golgi membranes; it also regulates the fragmentation and subsequent reassembly of the Golgi complex during mitosis. Abundant expression of Ms-golgin80 in neuroblasts and ganglion mother cells and its reduced expression in the neuronal progeny of these cells suggest that this protein may be involved in the maintenance of the proliferative state.

  20. Reduction of environmental pollution - Mohndruck Energy Centre with PHC installation and cooperative energy combination. Final report - appendices; Verminderung von Umweltbelastungen - Energiezentrum Mohndruck mit KWK-K-Anlagen und kooperativem Energieverbund. Abschlussbericht mit Anlagen zum Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Lichter, T.

    1999-11-30

    . Die Abluft wird in TNV-Anlagen gereinigt und die heissen Abgase zur Dampferzeugung eingesetzt. Der erzeugte Prozessdampf wird in die Gasturbinen der GuD-Anlage eingeduest und so zur zusaetzlichen Stromerzeugung genutzt. Im Jahr 1998 konnte durch die umweltentlastende und ressourcenschonende Technologie der KWKK-Anlagen neben einer umfassenden Verminderung der Luftschadstoffe NO{sub x} (um 60%), CO (um 49%), SO{sub x} und Staub (um jeweils 100%) eine Entlastung der Atmosphaere am Treibhausgas CO{sub 2} um ca. 78.000 t erzielt werden. Dieser Wert entspricht einer Minderung des CO{sub 2}-Ausstosses um ca. 52%. (orig.)

  1. Measurement and automatic control techniques at sewage treatment plants. Concepts, experience, trends.. Manuscripts and posters; Mess- und Regelungstechnik in abwassertechnischen Anlagen. Konzepte, Erfahrungen, Trends. Manuskripte und Poster-Praesentationen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference volume on measurement and automatic control techniques at sewage treatment plants deals with the following subjects: online analytics, measurement techniques and control techniques; use of model-assisted techniques; transparency and acceptance, plant management; process control concepts; optimization of operation. (SR) [Deutsch] Themen dieses Konferenzbandes ueber Mess- und Regelungstechnik in abwassertechnischen Anlagen sind: Online-Analytik, Mess- und Stelltechnik; Einsatz modellgestuetzter Verfahren; Transparenz und Akzeptanz, Betriebsmanagement; Leittechnische Konzepte; Betriebsoptimierung. (SR)

  2. Double-layer capacitors as dynamic stores for PV applications. Final report; Doppelschichtkondensatoren als dynamische Speicher fuer PV-Anwendungen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Willer, B.; Knorr, R.; Broeker, C.; Burger, B.; Wollny, M.

    1999-07-01

    Double layer capacitors are the system of choice whenever a large number of cycles and high capacity are required. They have the advantages of high cyclic strength, high capacity, freedom of servicing, insensitivity to high temperatures and long life. Drawbacks are low energy density, high self-discharge and high cost.Applications in water pumps, pathfinders and roller blind control systems were investigated. [German] Mit den Ergebnissen steht ein detailliertes Wissen ueber den weltweiten Entwicklungsstand und die physikalischen Eigenschaften von Doppelschichtkondensatoren zur Verfuegung. Ihre Eigenschaften wurden in Bezug auf moegliche photovoltaische Anwendungen hin analysiert. Anwendungsfehlder ergeben sich vorzugsweise dann, wenn hohe Zyklenzahl und Leistungsfaehigkeit gefordert werden. Die Vorteile des neuen Energiespeichers sind seine hohe Zyklenfestigkeit und Leistungsfaehigkeit, seine Wartungsfreiheit, Temperaturunempfindlichkeit und lange Lebensdauer. Ihnen stehen die Nachteile einer geringen Energiedichte, hohen Selbstentladung und hoher Kosten gegenueber. Eine deutliche Steigerung der Gesamteffizienz von photovoltaischen Versorgungseinheiten beim Einsatz von Doppelschichtkondensatoren ergeben energetische Simulationen unterschiedlicher Systeme. Fuer ausgewaehlte photovoltaisch versorgte Anwendungen konnte die Einsatzfaehigkeit von Doppelschichtkondensatoren in Feldtests erprobt und nachgewiesen werden. Wasserpumpensysteme, Pathfinders und eine Rolladensteuerung fuer ein Fenster wurden getestet. Der Einsatz von Doppelschichtkondensatoren zur weiteren Verbreitung photovoltaischer Anwendungen ist bereits heute fuer spezielle Anwendungen sinnvoll und wirtschaftlich. Mit weiter fallenden Preisen fuer die Kondensatoren und der Entwicklung von Kondensatorsystemen mit hoeheren Spannungen werden weitere Anwendungsfelder hinzukommen. Die Basis zur Entwicklung der notwendigen Systemtechnik und ihrer Demonstration in Feldversuchen ist durch die Ergebnisse des

  3. Ecological improvements to hydroelectric power plants under EEG. Guidance to environmental verifiers and water rights authorities; Oekologische Verbesserungsmassnahmen an Wasserkraftanlagen gemaess EEG. Leitfaden fuer Umweltgutachter und Wasserrechtsbehoerden

    Energy Technology Data Exchange (ETDEWEB)

    Meyr, Christoph; Pfeifer, Hansjoerg [EVIT GmbH Ingenieurbuero Unternehmensberatung, Muenchen (Germany); Schnell, Johannes; Hanfland, Sebastian [Landesfischereiverband Bayern e.V., Muenchen (Germany)

    2011-11-15

    The use of hydropower as a renewable form of energy is experiencing a renaissance due to the energy transition in Bavaria. The fishery evaluate not uncritically this development, because hydroelectric plants generally normally represent a considerable intervention in water and therefore in the habitat of the fish. In this case it should be noted that just often not even the minimum requirements of ecology are fulfilled at existing plants according to the Federal Water Act. [German] Die Nutzung der Wasserkraft als regenerative Energieform erlebt aufgrund der Energiewende in Bayern derzeit eine Art Renaissance. Die Fischerei bewertet diese Entwicklung nicht unkritisch, stellen Wasserkraftanlagen in der Regel doch einen erheblichen Eingriff in Gewaesser und somit den Lebensraum der Fische dar. Dabei ist festzustellen, dass gerade an bestehenden Anlagen haeufig nicht einmal die Mindestanforderungen der Oekologie erfuellt werden, wie sie das Wasserhaushaltsgesetz vorschreibt.

  4. Development of units for change measurement of batteries at photovoltaic plant. Final report; Entwicklung von Einheiten zur Ladezustandserfassung von Batterien in PV-Anlagen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Rothert, M.; Knorr, R.; Willer, B.

    1996-12-31

    The aim of the project was to contribute to enhanced service life and reliability of batteries in photovoltaic systems by developing further processes and components for charge measurement. The essential basic information in charge determination is the direct measurement of acid concentration in the electrolyte compartment of lead batteries and the evaluation and processing of this signal. Within the framework of this project, operative acidity sensors were developed and tested. They are accurate within an error margin of 0.5 per cent for short periods and of 2 per cent for long periods. A charge measurement unit based on the acid concentration reading was built and special algorithms for measuring charge were developed and tested. This unit stands out particularly because of the following: determination of dynamic charge, long-term stability, and automatic and regular adaptation to the type, size and age of the battery. Using this unit in combination with the acid concentration sensor in photovoltaic plant will permit more efficient plant operation and reliable protection of the battery. (orig./MM) [Deutsch] Ziel des Vorhabens war es, Massnahmen zur Verbesserung der Lebensdauer und Zuverlaessigkeit von Batterien in PV-Anlagen durch die konkrete Weiterentwicklung von Verfahren und Komponenten zur Ladezustandserfassung aufzuzeigen, durchzufuehren und zu demonstrieren. Die direkte Messung der Saeuredichte im Elektrolytraum von Bleibatterien sowie die Auswertung und Weiterverarbeitung dieses Signals bildet dabei die wesentliche Basisinformation. Im Rahmen des Vorhabens wurden funktionstuechtige Saeuredichtesensoren entwickelt und erprobt. Die dabei erreichte Genauigkeit betraegt im Kurzzeitbereich 0,5% und im Langzeitbereich ca. 2%. Eine Ladezustandseinheit basierend auf dem Saeuredichtesignal wurde aufgebaut und spezielle Algorithmen zur Ladezustandserfassung entwickelt und getestet. Besonders die Bestimmung des dynamischen Ladezustands, die Langzeitstabilitaet sowie

  5. Trigeneration plants in a field test: Enhancement of control and hydraulics; KWKK-Anlagen im Feldtest. Verbesserung ihrer Regelung und Hydraulik. Projekt ''Praxistest und Kombiregler einer KWKK-Anlage''

    Energy Technology Data Exchange (ETDEWEB)

    Backes, Klaus; Adam, Mario; Gottschald, Jonas [Fachhochschule Duesseldorf (Germany). Arbeitsgruppe E2 - Erneuerbare Energien und Energieeffizienz; Faber, Christian; Henneboehl, Fred; Lanz, Marco; Anthrakidis, Anette [Fachhochschule Aachen, Juelich (Germany). Solar-Institut Juelich

    2011-07-01

    Space HVAC system have the potential for better performance factors than conventional systems with separate generation of electricity, heat, and cold. In most cases, however, the components are not well matched, and the control regime needs to be improved. Especially the energy consumption of the pumps and recirculation cooler should be low. For this, two German universities (FH Duesseldorf and FH Aachen) investigated three systems with miniature cogeneration units by SenerTec and PowerPlus Technologies and with absorption refrigerators by SorTech AG. Two of the systems are classic field tests on the site of a customer (flower shop and engineering consultants' office), while the third is an innovative Hardware-in-the-Loop test stand ''HiL'' at Duesseldorf university. The HiL test stand comprises a real cogeneration unit, store and refrigerator, but the other components like recirculation cooler, building, and fan coils are replaced by simulation models in Matlab/Simulink with the tool boxes Carnot and Stateflow. Dynamic real-time simulation and real equipment are linked via the automatic HiL test stand, so the description can be similar to a real situation. Boundary conditions like building size, site, weather, usage patterns and hydraulics of heat and cold supply can be varied in the computer. This way, suggested control optimisation strategies can be tested in realistic conditions, reliable plant operation can be ensured in all states, and customer problems and critical states can be investigated individually. The field test stands, the HiL test stand and the results are presented. Concrete questions are gone into, e.g. how the operation of the individual components can be matched optimally, how energy can be saved when the cooling load of the refrigerator is reduced, and whether overtravel times or speed reduction of pumps are energetically interesting. [German] KWKK-Anlagen bieten Potential fuer bessere Gesamt-Nutzungsgrade der

  6. Guide for construction of wood power systems. Construction - economic efficiency - technology; Leitfaden fuer die Errichtung von Holzenergie-Anlagen. Umsetzung - Wirtschaftlichkeit - Technologie

    Energy Technology Data Exchange (ETDEWEB)

    Ruchser, M. [Forum fuer Zukunftsenergien e.V., Bonn (Germany)

    2001-07-01

    The Guidebook serves as a handbook for the entire operational sequence, which is necessary for the establishment of a wood combustion plant in Germany with an installed capacity larger than 100 kW{sub th}, for the use of fuel woods such as forest chips, wood and forest residues, pellets, wood waste, etc. within the limits of the laws and regulations prescribed for the respective performance classes. The Guidebook's purpose is to give potential investors and operators of wood combustion plants as well as the appropriate authorities a quick and global overview of the energetic use of wood in order to contribute to an increased application of this technology. The Guidebook introduces a Quality Model in Chapters 2 and 3, which describes the establishment of a wood combustion system in six phases. Eleven Management Aspects are differentiated, which can be helpful during the conversion of a project. Thus, potential investors and operators of wood combustion plants become acquainted with the most important aspects of this kind of project conversion. In addition, Chapter 4 provides an overview of the operating costs of wood combustion plants. The relevant licensing and planning procedures depending on the installed capacity and fuelwood use are comprehensively described in Chapter 5. Chapter 6 supplies a concrete overview of the environmental aspects and emissions of wood combustion. Since wood combustion plants must be - as all other investments - financially secured Chapter 7 provides a description of the relevant information on public means and subsidies. Besides all important promotion programmes, the new German Renewable Energy Law (Erneuerbare-Energien-Gesetz - EEG) of April 2000 is described in detail. Many examples of already realised wood combustion plant projects are described in Chapter 8. As an additional service, all significant addresses from ministries to energy agencies and associations are listed in Chapter 9. (orig.)

  7. Ausrüstung von Starkstromanlagen mit elektronischen Betriebsmitteln / Achtung: Abschnitte 5.3.2.2.2 (einschließlich Kurve 2 in Bild 2) und 7.3.1.2 gelten erst ab Mai 1990. Bestehende Anlagen und Betriebsmittel einschließlich Ersatzlieferungen brauchen nicht den Anforderungen dieser neuen Norm angepaßt zu werden.

    CERN Document Server

    Deutsches Institut für Normung. Berlin

    1988-01-01

    Ausrüstung von Starkstromanlagen mit elektronischen Betriebsmitteln / Achtung: Abschnitte 5.3.2.2.2 (einschließlich Kurve 2 in Bild 2) und 7.3.1.2 gelten erst ab Mai 1990. Bestehende Anlagen und Betriebsmittel einschließlich Ersatzlieferungen brauchen nicht den Anforderungen dieser neuen Norm angepaßt zu werden.

  8. Modelling, simulation and optimization of solarthermal systems in an object-oriented simulation environment; Modellierung, Simulation und Optimierung solarthermischer Anlagen in einer objektorientierten Simulationsumgebung

    Energy Technology Data Exchange (ETDEWEB)

    Schrag, T.

    2001-07-01

    , dessen Konsequenzen je nach Zielsetzung der Optimierung beurteilt werden muessen. Um die Moeglichkeiten von Smile aufzuzeigen, werden Anlagen zur Brauchwassererwaermung und zur Heizungsunterstuetzung sowie solare Nahwaermesysteme untersucht. Bei ersteren werden nur grosse Anlagen mit Pufferspeichern betrachtet. Insbesondere werden verschiedene Entladestrategien miteinander verglichen. Mit Hilfe der numerischen Optimierung wird fuer eine bestimmte Anlage die vorteilhafteste Kombination aus Waermetauscher und anliegendem Massenstrom bestimmt. Der Einsatz von Smile zur kombinierten Anlagen- und Gebaeudesimulation wird an Sanierungsmassnahmen von ostdeutschen Plattenbauten demonstriert. Um ein geplantes solarunterstuetztes Luftheizungssystem zu beurteilen, werden sowohl das Gebaeude, die Anlage, als auch die geplante Regelungsstrategie modelliert. (abstract truncated)

  9. Development of a system for detection and diagnosis of errors in the operation of space HVAC systems; Entwicklung eines Systems zur Erkennung und Diagnose von Fehlern beim Betrieb von HLK-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H.; Bauer, M.; Grob, R.F. [Stuttgart Univ. (Germany). Lehrstuhl fuer Heiz- und Raumlufttechnik

    1997-12-31

    Buildings with heating and space HVAC systems require considerable automatic control effort to ensure engergy-efficient operation. Faults are only to be avoided by the use of automatic fault detection systems. The contribution describes the procedure adopted in operation monitoring, the IKE system for fault detection and diagnosis, and the evaluation of the FDD system. (MSK) [Deutsch] Gebaeude mit heiz-und raumlufttechnischen Anlagen erfordern bei energetisch rationellem Bertrieb einen grossen Aufwand an Steuerungs-und Regelungstechnik. Um ohne Fehler zu arbeiten erfordert diese Steuerungs-und Regelungstechnik den Einsatz von automatischen Fehlererkennungssystemen. Im Folgenden werden die Vorgehensweise bei der Betriebsueberwachung, das IKE-System zur Fehlererkennung und Diagnose sowie die Evaluierung des FDD-Systems (Fault Detection and Diagnosis System) erlaeutert.

  10. Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines; Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plant und errichtet eine Nassdekontaminationsanlage zur Entsorgung von Komponenten russischer Atom U-Boote

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Jan; Konitzer, Arnold; Luedeke, Michael [AKB Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH (Germany)

    2010-05-15

    Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

  11. EEG II. Annexes and regulations. Comment; EEG II. Anlagen und Verordnungen. Kommentar

    Energy Technology Data Exchange (ETDEWEB)

    Frenz, Walter (ed.) [Rheinisch-Westfaelische Technische Hochschule Aachen (Germany). Berg-, Umwelt- und Europarecht

    2016-11-01

    Berlin commentary EEG II: safe through the paraphernalia Like hardly any other law, the Renewable Energies Act (EEG) is subject to constant changes. With the 2014 amendment, the EEG was fundamentally redesigned. This makes the application of the complex rules a challenge even for experts. In addition, the sub-rules contain important statements in the form of numerous annexes and regulations - with the EEG amendment 2014, this has become even more detailed. In it, many calculations are only defined in detail and the legal provisions of the EEG are made more definite and supplemented. The Berlin commentary EEG II accompanies you expertly through this complex matter. Experts explain the widely divergent rules in practice. If necessary for a better understanding, the provisions of the EEG 2014 are also explained. Consistently designed for your practice As a buyer of the work, you also benefit from access to an extensive, regularly updated database. This contains important legal energy regulations of the EU, the federal government and the countries. Even earlier legal positions remain searchable and can be conveniently compared with current versions. So you can see at a glance what has changed. [German] Berliner Kommentar EEG II: sicher durch den Paragrafengeflecht Wie kaum ein anderes Gesetz ist das Erneuerbare-Energien-Gesetz (EEG) staendigen Aenderungen unterworfen. Mit der Novelle 2014 wurde das EEG grundlegend umgestaltet. Dies macht die Anwendung der komplexen Regeln selbst fuer Experten zu einer Herausforderung. Zudem enthaelt auch das untergesetzliche Regelwerk wichtige Aussagen in Form zahlreicher Anlagen und Verordnungen - mit der EEG-Novelle 2014 ist dieses noch ausfuehrlicher geworden. In ihm werden viele Berechnungen erst naeher festgelegt und gesetzliche Bestimmungen des EEG entscheidend konkretisiert und ergaenzt. Der Berliner Kommentar EEG II begleitet Sie fachkundig durch diese komplexe Materie. Experten erlaeutern Ihnen praxisorientiert die

  12. Photovoltaic solar energy; Photovoltaische Solarenergie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Within the 27th symposium of the Ostbayerische Technologie-Transfer-Institut e.V. (Regensburg, Federal Republic of Germany) from 29th February to 02th March, 2012, at Banz monastery near Bad Staffelstein (Federal Republic of Germany), the following lectures were held: (1) EEG 12: State of the art and impacts (K. Freier); (2) Promising markets - PV market potentials Europe (M. Lohr); (3) Expansion requires restructuring - Research promotion for renewable energy and renewable energy supply systems (K. Deller); (4) Fields of application and potentials of photovoltaics in Germany without an enhanced EEG compensation (V. Quaschning); (5) ''Smart Solar Grid'' - Results of the analysis and solar roof potential of the first test area of the public utility Ulm (H. Ruf); (6) Power limitation at PV plants - Adjustment of modelling methods and comparison of different location (J. von Appen); (7) Exploitations to the power limitation till to 70 % of the module capacity (B. Giesler); (8) Actual procedural results of the clearing house EEG to photovoltaics and modifications at PV by means of the EEG 2012 (M. Winkler); (9) Grid integration of PV plants from a legal point of view (M. von Oppen); (10) EEG 2012 - Abetment or brake? PV and other renewable energies in comparison (M. Reichmuth); (11) On the precision of radiation and photovoltaics component models (J. Schumacher); (12) Impact of global radiation data with different properties on the performance ratio and prognosticated energy efficiency of photovoltaic power plants (M. Egler); (13) Quantification of superelevations of irradiation in high-resolution DWD datasets for different locations in Germany (M. Zehner); (14) Prognosis of the regional PV performance with measuring data of PV plant and satellite pictures (Y.-M. Saint-Drenan); (15) Photovoltaics and wind power: perfectly complementing power technologies using Central Germany as an example (C. Breyer); (16) Which and how much storages are necessary for a renewable power supply? (G. Bopp); (17) Electrochemical energy storage for a stationary intermediate storage - Concepts and perspectives (M. Wohlfahrt-Mehrens); (18) Decentral photovoltaics: Autonomy, own consumption and grid relief by means of local power and heat storage systems (J. Binder); (19) Maximization of the lifetime of electric batteries in PV systems by means of battery hybrid storage systems (V. Spaeth); (20) Possibilities for grid integration of a high amount of photovoltaic power plants in the area of low performance (G. Wirth); (21) Change of load of grid components at the implementation of photovoltaic power into the power distribution system (G. Herold); (22) Feeding management and limitation of the supply of the active power to 70 % according to the new EEG 2012 (A. Umland); (23) Power quality and dynamic grid support: Do the medium voltage regulations correspond to the properties of PV inverters? (G. Doetter); (24) Perspectives of wafer based solar modules, technology and costs (R. Brendel); (25) Why is solar power not climate neutral but still environmentally friendly? Actual ecobalances to photovoltaics (M. Stucki); (26) Are photovoltaic power plants ''highly dangerous''? (H. Laukamp); (27) Power-to-Gas - Storage of renewable energies in the natural gas distribution system (M. Specht); (28) Utilization of own photovoltaic power - Fluctuation of radiation and load (B. Wille-Haussmann); (29) Arc detection in photovoltaic power plants - A system comparison between USA and Europe (A. Haeing); (30) 20 years 1,000 roofs program - Long-term experiences from Saxonia (M. Reiner); (31) Quality assurance of PV inverters - 20 years of field experiences with photovoltaic power plants in grid interconnection (J. Laschinski); (32) Experiences with the installation and operation of photovoltaic storage systems: Field tests of Sol-ion systems in southern Germany, Guadeloupe, Martinique and at research institutes (H.-D. Mohring); (33) Do we use the correct reference? STC performance versus evaluation of the power of PV modules (R. Haselhuhn); (34) PID and correlation with field experiences (J. Berghold); (35) Potential induced degradation (PID) at crystalline PV modules (M. Schweiger); (36) Leakage current induced degradation of photovoltaic thin-film modules (P. Lechner).

  13. Ground water chemistry. Practice oriented guideline for the numerical modelling concerning condition, contamination and remediation of aquatic systems. 2. ed.; Grundwasserchemie. Praxisorientierter Leitfaden zur numerischen Modellierung von Beschaffenheit, Kontamination und Sanierung aquatischer Systeme

    Energy Technology Data Exchange (ETDEWEB)

    Merkel, Broder J.; Planer-Friedrich, Britta [TU Bergakademie Freiberg (Germany). Inst. fuer Geologie

    2008-07-01

    The second print run of 'ground water chemistry' is supposed to be a practice oriented guideline for a fast introduction into the thermodynamic modeling. Besides a minimum theoretical background the book is focused to practical examples using the computer program PHREEQC. The reprint includes the additional possibilities of the CD-MUSIC concept for surface modeling. Examples concerning reactive mass transport include not only the 1D transport code PGREEQC, but also a 3D example using PHAST und the graphical user interface WPHAST. Uncertainties of thermodynamic data may be modeled using the program LJGUNSKILE. As before detailed descriptions allow the user to reach step by step more complex hydrogeochemical modeling. All of the cited computer codes are compiled on an enclosed CD. [German] Auch die zweite Auflage von 'Grundwasserchemie' bietet als praxisorientierter Leitfaden einen schnellen Einstieg in die thermodynamische Modellierung. Neben einem minimalen theoretischen Hintergrund liegt der Fokus auf praktischen Beispielen mit dem Computerprogramm PHREEQC. In der Neuauflage sind nun zusaetzlich die Moeglichkeiten des CD-MUSIC Konzepts zur Oberflaechenmodellierung erklaert. Beispiele zum reaktiven Stofftransport umfassen nicht nur den 1d Transport in PHREEQC, sondern auch ein 3d Beispiel mittels PHAST und der graphischen Benutzeroberflaeche WPHAST. Unsicherheiten thermodynamischer Daten koennen mit Hilfe des Programms LJGUNSKILE modelliert werden. Wie in der ersten Auflage helfen detaillierte Beschreibungen der Loesungen dem Nutzer, Schritt fuer Schritt von einfachen hin zu immer komplexeren hydrogeochemischen Modellierungen zu gelangen. Alle Programme sowie die Loesungen zu den Aufgaben befinden sich auf der CD zum Buch. (orig.)

  14. Underground gas storage Uelsen: Findings from planning, building and commissioning the surface buildings and structures; Untertagegasspeicher (UGS) Uelsen: Erkenntnisse aus Planung, Bau und Inbetriebnahme der obertaegigen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Focke, H.; Brueggmann, R.; Mende, F.; Steinkraus, D.; Wauer, R. [BEB Erdgas und Erdoel GmbH, Hannover (Germany)

    1998-12-31

    The article describes the concepts of the plants and equipment and the specific features of the underground storage at Uelsen. The underground storage will be purpose-built as an H-gas storage in a nearly depleted sandstone deposit. At a nominal deliverability of 250.000 cubic m/h (Vn) the storage at Uelsen has more potential for expansion. This potential was taken into account by designing appropriate pressure stages, capacities, performance characteristics and space. (orig.). [Deutsch] Die nachfolgende Veroeffentlichung stellt das anlagentechnische Grundkonzept und die spezifischen Besonderheiten des UGS Uelsen dar. Der im suedwestlichen Niedersachsen als H-Gasspeicher in einer nahezu ausgefoerderten Buntsandsteinlagerstaette eingerichtete UGS Uelsen wird in mehreren Ausbaustufen bedarfsgerecht fertiggestellt. Bei einer Nennentnahmekapazitaet von 450.000 m{sup 3}/h (Vn) und einer Nenninjektionsleistung von 250.000 m{sup 3}/h (Vn) weist der UGS Uelsen noch weiteres Potential fuer Erweiterungen auf. Dieses Ausbaupotential wurde bei der Planung und dem Bau der bestehenden Anlagen durch Festlegung entsprechender Druckstufen, Kapazitaeten, Leistungsgroessen und Platzanordnungen beruecksichtigt. (orig.)

  15. Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH plan and build wet decontamination plant for disposal of components of Russian nuclear submarines

    International Nuclear Information System (INIS)

    Schneider, Jan; Konitzer, Arnold; Luedeke, Michael

    2010-01-01

    Anlagen- und Kraftwerksrohrleitungsbau Greifswald, on behalf of Energiewerke Nord GmbH, Lubmin, plan and build a wet decontamination facility for the waste management center at Saida Bay, Russia (EZS). The plant is part of a large project with a total volume on the order of 3-digit millions funded by the German Federal Ministry for Economics and Technology. This project involves construction at Saida Bay near the port city of Murmansk of a complete waste management center and a long-term interim store for radioactively contaminated components. These components are mainly parts of decommissioned nuclear vessels and submarines whose metals, after decontamination, can be returned to economic use. The basis of the wet decontamination plant is a former AKB project for disposal and re-use of contaminated metal components of Energiewerke Nord GmbH at Lubmin, which is being adapted and developed further. The plant is to allow unrestricted re-use of the metals after surface cleaning and surface abrasion, respectively. For this purpose, the contaminated layer is removed far enough for the clearance limits under the Radiation Protection Ordinance to be met. A large fraction of the metals can be re-used after cleaning and do not have to be stored in a financially and logistically expensive process. The contract gives AKB an excellent opportunity to demonstrate its capabilities in plant construction, especially in the very sensitive area of disposal of radioactively contaminated objects. (orig.)

  16. Practical guide to more efficient use of energy in industry; Praxisleitfaden zur Foerderung der rationellen Energieverwendung in der Industrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-04

    Starting with an easily digestible explanation of fundamental concepts and terms in the field of energy and its applications, as well as the related thermodynamic principles and processes, the second chapter explains the system of energy and exergy. Chapters 3 and 4 give a comprehensive picture of current technologies and processes in energy generation and engineering, from energy applications for process heat generation through to power plants and combined and heat and power systems, fuel cells and energy generation from renewable primary sources, discussing related aspects of interest such as energy and pollutant emissions, and economic aspects. Chapter 5 is devoted to counselling and guidance for corporate energy engineering analysis and enhancement. Chapters 6 and 7 round up the comprehensive information addressing the legal aspects of procedures for licensing of energy generation and conversion systems, and the various financing instruments and schemes available for projects intended to promote more efficient use of energy. (orig./CB) [Deutsch] Ausgehend von einer anschaulichen Beschreibung grundlegender Energiebegriffe und thermodynamischer Zusammenhaenge wird im zweiten Kapitel in klarer Weise das Zusammenspiel zwischen Energie und Exergie dargestellt. Aufbauend auf diesen grundlegenden Hinweisen bieten die Kapitel 3 und 4 eine weitreichende Uebersicht der gegenwaertig zur Verfuegung stehenden Prozess- und Energietechniken. Ausgehend von Techniken zur Prozesswaermebereitstellung spannt sich der Bogen ueber Kraftanlagen und Kraft-Waerme-Kopplungssysteme bis hin zu Brennstoffzellen und regenerativen Energietechniken, wobei der Schwerpunkt der Betrachtungen auf Energie- und Emissionsaspekte sowie wirtschaftliche Randbedingungen gelegt wurde. Kapitel 5 gibt Hinweise zur Vorbereitung und Durchfuehrung energietechnischer Beratungen und Analysen auf betrieblicher Ebene. Im Anschluss an den technischen Teil dieses Leitfadens folgt in Kapitel 6 eine Erlaeuterung der

  17. Praxis des Klebens

    CERN Document Server

    Theuerkauff, Petra

    1989-01-01

    Bei diesem Buch handelt es sich um einen Leitfaden fur Klebepraktiker. Es werden die verschiedenen Einzelschritte beim kleben beschrieben, als auch die vorbereitenden Massnahmen und anschliessenden Prufverfahren auf Festigkeit behandelt. Das Buch sollte an keinem Arbeitsplatz fehlen, wo man sich mit Problemen der Fugetechnik des Klebens beschaftigt.

  18. Deutsch-dänische Kulturbrille

    DEFF Research Database (Denmark)

    Müller, Katarina Le; Hallsteinsdóttir, Erla

    Projekts Nationale Stereotype und Marketingstrategien in der deutsch-dänischen interkulturellen Kommunikation (SMiK). Mit dem Leitfaden stellen wir das im SMiK-Projekt erarbeitete und wissenschaftlich gesicherte Wissen um deutsch-dänische stereotype Handlungsmuster für die kleinen und mittelständischen...

  19. Service tests of voltage detectors - an essential requirement for working without accidents in electricity installations with nominal voltage > 1 kV; Wiederholungspruefungen an Spannungspruefern. Eine wesentliche Voraussetzung fuer das unfallfreie Arbeiten in elektrischen Anlagen mit Nennspannungen > 1 kV

    Energy Technology Data Exchange (ETDEWEB)

    Lange, G. [VEW Eurotest GmbH, Dortmund (Germany); Emmer, H. [Bayernwerk AG Muenchen (Germany); Schuhmann, J. [Bayernwerk Hochspannungsnetz GmbH Nuernberg (Germany); Grab, E. [Bewag-AG, Berlin (Germany); Krebeck, N. [RWE Energie AG, RV Nike, Osnabrueck (Germany); Rodwald, R. [Schleswag AG, Rendsburg (Germany); Schlegel, B. [Stadtwerke Muenchen GmbH (Germany)

    1999-03-22

    The function of voltage detectors is an important requirement for working without accidents in electricity installations. For this reason the required service tests, described in VDE and VBG 4, are essential to receive a secure function of the voltage detector over its service time. The results of the statistical evaluation of 10.000 service tests in test fields of electricity utilities document the importance of these tests. (orig.) [Deutsch] Die Funktionsfaehigkeit von Spannungspruefern ist eine wesentliche Voraussetzung fuer das unfallfreie Arbeiten in elektrischen Anlagen. Aus diesem Grunde stellen die in den VDE-Bestimmungen und in der VBG 4 festgelegten Wiederholungspruefungen eine unersetzliche Massnahme zur Erhaltung der Funktionsfaehigkeit dar. Die Ergebnisse der statistischen Auswertung von 10 000 Wiederholungspruefungen in Prueffeldern von Energieversorgungsunternehmen unterstreichen die Wichtigkeit dieser Pruefungen. (orig.)

  20. Energy-optimised planning and operation of UPS installations. Guidelines for planners and operators; Energieoptimierte Planung und Betrieb von USV-Anlagen. Ein Leitfaden fuer Planer und Betreiber

    Energy Technology Data Exchange (ETDEWEB)

    Neyer, A.; Schnyder, G.; Mauchle, P.

    2004-09-15

    This comprehensive brochure elaborated for the Swiss Federal Office of Energy (SFOE) is one of a set of nine reports that provide an overall review of the energy-efficiency of UPS systems. This brochure for planners and operators of UPS installations takes a look at how UPS installations can be optimised in order to reduce losses and to provide optimal operation as far as energy efficiency is concerned. The brochure explains the various types of UPS systems and their use and gives tips on ordering. Operational modes, load considerations, system configuration and specifications for putting to tender are looked at, as are the requirements to be placed on the systems for optimal operation. Basic rules for planning activities are quoted. Finally, rotating UPS installations and dynamic energy storage are briefly looked at. The paper is completed with checklists and a quality/energy-matrix.

  1. Photovoltaic solar energy. Proceedings; Photovoltaische Solarenergie. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Within the 21st symposium 'Photovoltaic Solar Energy' of the Ostbayerisches Technologie-Transfer-Institut e.V. (Regensburg, Federal Republic of Germany) at Banz Monastery (Bad Staffelstein, Federal Republic of Germany) between 8th and 10th March, 2006, the following lessons were held: (1) Basic conditions for a market support programme in the European context (EEG) (Winfried Hoffmann); (2) Actual developments in the German market of photovoltaics (Gerhard Stryi-Hipp); (3) Become a part of the global economic survey of Task 2 ''PV cost over time'' (Thomas Nordmann); (4) The market of photovoltaic will be a European market in the future (Murray Cameron); (5) Development and state of the art of the photovoltaic industry in the Peoples Republic of China (Frank Haugwitz); (6) Silicon for the photovoltaic industry (Karl Hesse); (7) Cell technology: Impulses for a cost effective photovoltaic with valuable silicon (Rolf Brendel); (8) Thin-film solar modules for the photovoltaic - state of the art and industrial perspectives (Michael Powalla); (9) Modules - bottleneck and flood of orders: How to act an installer? (Helmut Godard); (10) Photovoltaic open-field systems - Actual experiences and conflict lines (Ole Langniss); (11) Comparison of actual and future trends of Balance-of-System costs for large scale ground based PV systems with crystalline and thin-film modules (Manfred Baechler); (12) Financing PX projects from a Bank perspective (Joachim Treder); (13) Criteria of quality for solar fonds - Criteria of evaluation for capital investors and self-commitment for emission houses (Ulla Meixner); (14) Analysis of the distribution pathways for photovoltaic plants from the manufacturer to the final customer considering the decreasing demand and increasing prices (Michael Forst); (15) Solar power 2005 - Evaluation of real operational data of 1,000 plants in Germany (Gerd Heilscher); (16) Improvement of PV-inverter efficiency - targets, pathways and limits (Mike Meinhardt); (17) Washing with the sun - Direct consumption of locally generated PV current by means of directed load shift in private households (Georg Bopp); (18) Efficiency by synergy. Export initiative renewable energies (Berthold Breid); (19) Modular PV power supply in the Empire of the Midth (Michael Wollny); (20) Breakthrough to a new era of PV hybrid systems with the help of standardised components communication? (Michael Mueller); (21) New PV stand-alone supply for frequency variable loads (Wolfgang Hernschier); (22) Characterization of solar batteries in long-term investigations according IEC 61427 (Wolfgang Wiesner); (23) Professional PV plant configuration - the status quo of the PV prpgrams (Mike Zehner); (24) Simulating renewable power projects with greenius{sup Free} (Volker Quaschning); (25) Analysis of the effect of shade and equivalent circuit of PV modules with the simulation software ''Solar Pro'' (Yusuke Mataki); (26) From data sheet values to the system gain - on realistic modelling of small PV generators (Hans Georg Beyer); (27) Form follows function - follows form function? - Ineractions between building functions and photovoltaic (Wolfgang Willkomm); (28) Market chances and technology perspectives for the Swiss facade construction by means of building integrated PV systems (Reto Miloni); (29) Passiv solar office building BIOHAUS Paderborn - architectonic overview and a first energy balance (Willi Ernst, Ralf Zirkler); (30) Building integration and education in Austria (Gernot Becker); (31) Photovoltaic and light (Thomas Herzog); (32) 10 years of test experience with the certification of design of photovoltaic modules (Andreas Cox); (32) Large size solar cells and the IEC 61215 - New challenges for the module junction (Eckehard Hofmueller); (33) Limits of power output optimisation of PV arrays by pre-sorting of PV modules (Werner Herrmann); (34) Coloured and patterned CIS modules (Dieter Geyer); (35) Energy management in the low voltage level using the Bidirectional Energy Management Interface (BEMI) (David Nestle); (36) Which inverter for which module technology? (Heribert Schmidt); (37) Performance of PV inverters during disturbed network conditions - Test results of state-of-the-art products and Recommendations for future standards (Roland Bruendlinger); (38) Safety aspects for use and testing of transformrless PV inverters - Results of the project SIDENA (Joerg Kirchhof); (39) DC switch-disconnector for PV inverters - Motivation, requirements and components (Joachim Laschinski); (40) BISI insead of ENS. - Automatic selector between a grid-connected domestic production plant and the public low-voltage grid (Michael Viotto).

  2. Manual of process automation. On-line control systems for devices in the process technology. 3. tot. rev. and enl. ed.; Handbuch der Prozessautomatisierung. Prozessleittechnik fuer verfahrenstechnische Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Maier, U.; Frueh, K.F. (eds.)

    2004-07-01

    This is a reference manual for engineers who need answers to automation problems in chemical engineering. Some new current subjects have been introduced to complement the information. The following chapters are new or have been rewritten by new authors: Internet and intranet technologies; Outline of process-related functions; Control systems in industrial applications; Problems and solutions; Model-based predicative control (MPC); Report archive analysis; Control Loop Performance Monitoring (CPM); Automation structures; Explosion protection; Remote-I/O; Integration of intelligent field equipment in PLS; Weighing and filling techniques; Safety; Maintenance - structures and strategies. The other chapters have been revised and updated as well. (orig.) [German] Das grundsaetzliche Konzept des Handbuchs ist unveraendert: Es dient als Nachschlagewerk fuer Ingenieure, die sich in verschiedenen Taetigkeitsbereichen mit Fragen der Automatisierung verfahrenstechnischer Anlagen auseinandersetzen muessen. Einige Themen wurden neu aufgenommen - wegen ihrer Aktualitaet und zur Abrundung des Themenspektrums. Folgende Kapitel sind voellig neu oder mit neuen Autoren wesentlich erweitert: Internet-/Intranettechnologien; Uebersicht ueber prozessnahe Funktionen; Industrielle Regelung: Probleme und Problemloesungen; Modellgestuetzte praediktive Regelung (MPC); Meldearchivanalyse; Control Loop Performance Monitoring (CPM); Automatisierungsstrukturen; Explosionsschutz; Remote-I/O; Integration intelligenter Feldgeraete in PLS; Waege- und Abfuelltechnik; Anlagensicherheit; Ganzheitliche Instandhaltung - Strukturen und Strategien. Die uebrigen Kapitel wurden aktualisiert und teilweise auch wesentlich ueberarbeitet. (orig.)

  3. Notch activates Wnt-4 signalling to control medio-lateral patterning of the pronephros.

    Science.gov (United States)

    Naylor, Richard W; Jones, Elizabeth A

    2009-11-01

    Previous studies have highlighted a role for the Notch signalling pathway during pronephrogenesis in the amphibian Xenopus laevis, and in nephron development in the mammalian metanephros, yet a mechanism for this function remains elusive. Here, we further the understanding of how Notch signalling patterns the early X. laevis pronephros anlagen, a function that might be conserved in mammalian nephron segmentation. Our results indicate that early phase pronephric Notch signalling patterns the medio-lateral axis of the dorso-anterior pronephros anlagen, permitting the glomus and tubules to develop in isolation. We show that this novel function acts through the Notch effector gene hrt1 by upregulating expression of wnt4. Wnt-4 then patterns the proximal pronephric anlagen to establish the specific compartments that span the medio-lateral axis. We also identified pronephric expression of lunatic fringe and radical fringe that is temporally and spatially appropriate for a role in regulating Notch signalling in the dorso-anterior region of the pronephros anlagen. On the basis of these results, along with data from previous publications, we propose a mechanism by which the Notch signalling pathway regulates a Wnt-4 function that patterns the proximal pronephric anlagen.

  4. Pestel study: system comparison of the generation of electric current and heating energy in coupled and uncoupled plants; Pestel Studie: Systemvergleich der Strom- und Heizenergieerzeugung in gekoppelten und ungekoppelten Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, K.P.

    1995-12-31

    A system comparison of the generation of electric current and heating energy in coupled and uncoupled plants was carried out in the years 1983/84 at the Eduard Pestel Institute for system research in Hannover. A report is given on the main focus of the investigation which was the comparison of cogeneration power plant for cogeneration with the current generation in modern condensation power plants and the corresponding generation of heating energy in modern gas boilers. The primary energy consumption for generating electric current was compared by means of four examples to the consumption for heating energy generation. The costs of this generation in terms of national economy and industrial management were also compared to each other by means of four examples. (orig.) [Deutsch] Am Eduard Pestel Institut fuer Systemforschung e.V. in Hannover wurde in den Jahren 1983/1984 ein Systemvergleich zwischen der Strom- und Heizenergieerzeugung in gekoppelten und ungekoppelten Anlagen durchgefuehrt. Schwerpunkt der Untersuchung, ueber den heute berichtet werden soll, war der Vergleich von - Blockheizkraftwerken zur gekoppelten Erzeugung mit - einer Stromerzeugung in modernene Kondensationskraftwerken und der entsprechenden Heizwaermeerzeugung in modernen Gaskesseln. Dabei wurden anhand von vier konkreten Fallbeispielen jeweils - die Primaerenergieverbraeuche fuer die Strom- und Heizwaermeerzeugung sowie - die volkswirtschaftlichen und betriebswirtschaftlichen Kosten dieser Erzeugung miteinander verglichen. (orig.)

  5. PV systems: Things are improving again. Medium-sized enterprises are getting into the solar module business; Photovoltaik: Nach Talfahrt wieder aufwaerts. Mittelstaendische Firmen steigen ins Solarmodulgeschaeft ein

    Energy Technology Data Exchange (ETDEWEB)

    Lemme, H.

    1996-06-25

    At the 11th `Symposium for Photovoltaic Solar Energy Conversion`, which was held at Banz Monastery, the drastic decline of the German solar celll production was discussed. Especially the closing down of ASE Wedel gave rise to dark speculations. However, some experts think the problem will be solved now that several medium-sized enterprises have entered the solar market. (HW) [Deutsch] Auf dem elften `Symposium photovoltaische Solarenergie` im Kloster Benz wurde der drastische Rueckgang der deutschen Solarzellenproduktion diskutiert. Insbesondere bereitete die Schliessung des Wedeler ASE-Werkes einige Sorgen. Nach Meinung verschiedener Fachleute scheint sich das Problem jedoch zu loesen, nachdem mehrere mittelstaendische Betriebe auf dem Solarsektor eingestiegen sind. (HW)

  6. Profitability aspects of combined power/heat plants based on the example of a gas turbine; Wirtschaftlichkeitsbetrachtungen ueber KWK-Anlagen am Beispiel einer Gasturbine

    Energy Technology Data Exchange (ETDEWEB)

    Klimek, W. [Thyssengas GmbH, Duisburg (Germany)

    1998-04-01

    verschiedene Finanzierungsmodelle fuer KWK-Anlagen diskutiert sowie ein Preissicherungsverfahren erlaeutert. (orig.)

  7. Condition monitoring for offshore wind parks. A module for ensuring plant availability and risk minimization; Condition Monitoring fuer Offshore-Windparks. Ein Baustein zur Sicherstellung der Anlagenverfuegbarkeit und zur Risikominimierung

    Energy Technology Data Exchange (ETDEWEB)

    Hoering, B. [Deutsche Montan Technologie GmbH, Essen (Germany). Engine Logic Division

    2003-07-01

    The economic success of offshore wind energy and hence its competitiveness alongside conventional energy generation depends to a major extent on the reliability and availability of the installations. The profitability is determined, as is efficiency, by the costs for operation and maintenance over the whole plant life. Only plants with low operational management costs are therefore attractive in the long-term for the market and will help create customer satisfaction and loyalty. Because the costs for servicing and maintenance of offshore installations will be several times higher than for onshore facilities, the manufacturers and operators are called upon to think about new approaches to monitoring and maintaining offshore wind turbines. (orig.) [German] Der wirtschaftliche Erfolg der Offshore-Windenergie und somit die Konkurrenzfaehigkeit gegenueber konventioneller Energiegewinnung haengt massgeblich von der Zuverlaessigkeit und der Verfuegbarkeit der Anlagen ab. Die Wirtschaftlichkeit wird neben dem Wirkungsgrad durch die Kosten fuer Betrieb und Wartung waehrend der gesamten Anlagenlebensdauer bestimmt. Nur Anlagen mit geringen Betriebsfuehrungskosten sind daher fuer den Markt langfristig attraktiv und tragen zur Kundenzufriedenheit und -bindung bei. Weil die Kosten fuer Wartung und Instandhaltung von Offshore-Anlagen um ein vielfaches hoeher sein werden als bei Onshore-Anlagen, sind die Hersteller und Betreiber aufgefordert, ueber neue Konzepte der Windenergieanlagen-(WEA-)Ueberwachung und -instandhaltung nachzudenken. (orig.)

  8. Environmental protection by cost minimization: Least Cost Planning for traffic. Includes a guide for the application in local communities; Umweltentlastung durch Kostenminimierung: Least Cost Planning im Verkehr. Mit Leitfaden fuer die Anwendung in Kommunen

    Energy Technology Data Exchange (ETDEWEB)

    Bracher, T.; Diegmann, V.; Eckart, C.F.; Liwicki, M.; Lobenberg, G.; Wetzel, C. [Gesellschaft fuer Informatik, Verkehrs- und Umweltplanung mbH (IVU), Berlin (Germany); Bergmann, M.; Uricher, A.; Lueers, A. [Oeko-Institut, Inst. fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Becker, U.; Karl, G.; Karl, B.; Voellings, A. [Technische Univ. Dresden (Germany). Lehrstuhl fuer Verkehrsoekologie

    1999-08-01

    den Energiesektor entwickelte Least Cost Planning zu uebertragen. Auf der Basis einer Analyse der in der Literatur dokumentierten Ansaetze und der vorhandenen Bewertungsverfahren fuer oeffentliche Massnahmen wurden Anforderungen an Methodik und Entwicklung eines verbesserten Bewertungsverfahrens formuliert. Dieses muss verkehrsmitteluebergreifend (intermodal) und verkehrsuebergreifend (integriert) sein. Das entwickelte Verfahren ermoeglicht erstens die Darstellung der Verkehrsausgaben und Einnahmen einer Stadt im Jahresueberblick, und zweitens die vergleichende Bewertung von Planungsvarianten. Dies wurde anhand verschiedener Varianten fuer die Erschliessung eines Gewerbegebiets im Norden Freiburgs illustriert. Dabei wurden drei Varianten untersucht: die Verlaengerung einer Stadtbahnstrecke, die Verdichtung des Busverkehrsnetzes und die Einrichtung von Service-Stationen und weitere Foerdermassnahmen fuer den Fahrradverkehr. Neben den Berechnungen von Einnahmen und Ausgaben fuer jede Variante wurde eine uebersichtliche Darstellung von Auswirkungen auf die Verkehrsnachfrage, die Belastung mit Luftschadstoffen und Laerm sowie den Flaechenverbrauch entwickelt. Im Ergebnis schneidet die Erschliessung mit dem Fahrrad tendenziell guenstig ab. Der Abschlussbericht umfasst drei Baende sowie einen Leitfaden zur Anwendung des Verfahrens in Kommunen. Dazu gehoert ein Satz Tabellen im Excel Format, der die leichte Anwendung ermoeglicht. (orig.)

  9. Virtual power plants in energy industry law. Possible manifestations and from them resulting legal questions; Virtuelle Kraftwerke im Energiewirtschaftsrecht. Moegliche Erscheinungsformen und daraus resultierende Rechtsfragen

    Energy Technology Data Exchange (ETDEWEB)

    Kahlbrandt, Lea Katharina [Bucerius Law School, Hamburg (Germany)

    2017-08-15

    Although cogeneration plants are operated with fossil fuels are not quite as environmentally friendly as EEG systems they have a much more favorable effect due to their high efficiency climate as conventional power plants. In the future this could can even improve with the aid of fuel cell technology. Therefore, they play for the transition to a safe and secure more efficient power supply conditions for a merger of cogeneration plants overall favorable, in particular because that no influence on the or the emission trading obligation of the plant operators has. However, the complete elimination of avoided network charges could be counterproductive. Just virtual power plants of cogeneration plants have an effect on a feed-in that the grid not charged, so fees for a decentralized feed in these cases can be justified. Also the development of cogeneration development within the framework of the newly introduced calls will have a major impact on the development of virtual power stations. [German] Zwar sind KWK-Anlagen, die mit fossilen Brennstoffen betrieben werden, nicht ganz so umweltfreundlich wie EEG-Anlagen, doch haben sie aufgrund ihres hohen Wirkungsgrades eine viel guenstigere Klimabilanz als konventionelle Kraftwerke. In Zukunft koennte diese sich mithilfe der Brennstoffzellen-Technologie sogar noch verbessern. Daher spielen sie fuer den Uebergang zu einer sicheren und klimafreundlicheren Stromversorgung eine wichtige Rolle. Die Bedingungen fuer einen Zusammenschluss von KWK-Anlagen sind insgesamt guenstig, insbesondere weil jener keinen Einfluss auf die Foerdersaetze oder die Emissionshandelspflicht der Anlagenbetreiber hat. Allerdings koennte die vollstaendige Abschaffung vermiedener Netzentgelte kontraproduktiv sein. Gerade virtuelle Kraftwerke aus KWK-Anlagen wirken auf eine Einspeisung hin, die das Netz nicht ueberfordert, sodass Entgelte fuer eine dezentrale Einspeisung in diesen Faellen durchaus eine Rechtfertigung haben. Auch die Entwicklung des KWK

  10. Electrochemical storage systems for renewable power supply systems. Workshop; Elektrochemische Speichersysteme fuer regenerative Energieversorgungsanlagen. Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Garche, J.; Hoehe, W. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Ulm (Germany); Stadermann, G. [eds.] [Forschungsverbund Sonnenenergie, Berlin (Germany)

    1999-07-01

    This volume contains 26 contributions on batteries and PV systems. Vol. 1 discusses the following subjects: 1. Evaluation and assessment of the performance of battery systems in existing PV systems; 2. Status and prospects of storage systems; 3. Experience, requirements and markets; 4. Storage battery operation and assessment; 5. Systems engineering and operation of PV systems. [German] Dieser Band enthaelt 26 Beitraege zum aktuellen Stand der Batterien sowie der dazugehoerigen Systeme fuer Photovoltaik-Anlagen. Der Band ist in fuenf Themenbereiche unterteilt: 1. Auswertung und Bewertung des Betriebsverhaltens von Batteriesystemen in bestehenden PV-Anlagen; 2. Stand und Zukunft von Speichersystemen; 3.Erfahrungen, Anforderungen und Maerkte; 4. Speicher-Betriebsfuehrung und -Zustandsbestimmung; und 5. Systemtechnik und Betriebsfuehrung von PV-Systemen.

  11. Combined heat and power generation - a problem of reimbursement? CHP systems still on the march; BHKW - nur eine Frage der angemessenen Verguetung? Kraft-Waerme-Kopplung weiter im Aufwind

    Energy Technology Data Exchange (ETDEWEB)

    Jost, H.

    1996-04-15

    Systems for combined heat and power generation were a widely discussed issue in 1995. On the one hand, an ecological assessment was made by a study of the Eduard-Pestel-Institut fuer Systemforschung, Hanover. On the other hand, the problem of reimbursement for electricity supplied to the public grid is still unsolved. (orig.) [Deutsch] Anlagen zur gekoppelten Erzeugung von Strom (Kraft) und Waerme (KWK) waren im Jahr 1995 Gegenstand einer intensiven Diskussion. Zum einen hat eine Diskussion zur oekologischen Bewertung von KWK-Anlagen stattgefunden, die im wesentlichen von einer Studie des Eduard-Pestel-Instituts fuer Systemforschung in Hannover angestossen wurde. Zum anderen sind die Verguetungen fuer KWK-Strom in das oeffentliche Netz nach wie vor umstritten. (orig.)

  12. The water pollution representative. The specialist knowledge for the internal wastewater treatment; Der Gewaesserschutzbeauftragte. Das Fachwissen fuer die innerbetriebliche Abwasserbehandlung

    Energy Technology Data Exchange (ETDEWEB)

    Frahne, D.; Graef, R.; Kratsch, D.

    1998-05-01

    The first chapter deals with the most important legal aspects, handles the regulations after which plants with waste water and water pollutants are to be operated as well as the duties and rights of the water pollution representative. In the second chapter, proved and common means are discussed as they are adopted for the processing of chemicals and waste waters on the point of origin. To this belong major handling of water polluting substances and the corresponding plants as well as examples of off waste water saving processes and plants for waste water processing. In the third chapter, the environment analytical measures are described. (orig./GL) [Deutsch] Das erste Kapitel geht auf die wichtigsten rechtlichen Aspekte ein, behandelt die Regelungen, nach denen Anlagen mit Abwasser und wassergefaehrdenden Stoffen zu betreiben sind, sowie die Pflichten und Rechte des Gewaesserschutzbeauftragten. Im zweiten Kapitel werden bewaehrte und verbreitete Methoden besprochen, wie sie fuer die Behandlung von Chemikalien und Abwaessern am Entstehungsort eingefuehrt sind. Dazu gehoeren vorrangig der Umgang mit wassergefaehrdenden Stoffen und den entsprechenden Anlagen sowie auch Beispiele abwassersparender Behandlungsverfahren und Anlagen zur Abwasserbehandlung. Im dritten Kapitel werden die umweltanalytischen Massnahmen erlaeutert. Dabei werden einfach durchzufuehrende Massnahmen der Vor-Ort-Analytik, wie sie sich im `Feldeinsatz` bewaehrt haben, in den Vordergrund gestellt. (orig./GL)

  13. Development of a product data model to support an integral planning of buildings and their heating- and air conditioning devices; Entwicklung eines Produktdatenmodells zur Unterstuetzung der integralen Planung von Gebaeuden und ihrer heiz- und raumlufttechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hinkelmann, M.

    2000-08-01

    . (orig.) [German] Der Lebenszyklus aller technischen Anlagen ist weitgehend gleich. Eine Anlage wird zunaechst geplant, dann errichtet und abgenommen, anschliessend beginnt der normale Betrieb. Im regulaeren Betrieb wird in regelmaessigen Zeitabstaenden eine Wartung durchgefuehrt. In groesseren Abstaenden werden umfangreiche Erneuerungen, Renovierungen, notwendig. Der zeitliche Ablauf eiener Renovierung ist wie der zeitliche Ablauf einer Neuplanung. In jeder Phase des Lebenszyklus werden Software-Werkzeuge zur Bewertung der Planungs- bzw. Betriebszustaende und zur Unterstuetzung der Planungsaufgaben eingesetzt. Die Effizienz dieser Werkzeuge haengt entscheidend von einem reibungslosen Datenaustausch ab. Es gilt daher ein Schema zu finden, das die Integration der Software-Werkzeuge fuer Planung, Betrieb und Renovierung ermoeglicht. In der vorliegenden Arbeit wird ein Szenario zur Integration von Planungs- und Bewertungswerkzeugen fuer HLK-Anlagen entwickelt. Das Szenario orientiert sich an den Gegebenheiten des heute ueblichen Planungsablaufs mit verschiedenen unabhaengigen Planern. Zentraler Bestandteil dieses Szenarios ist ein Produktdatenmodell, das sich durch eine flexible und offene Beschreibung von Gebaeude und technischer Anlage auszeichnet. Es wird eine, als ein Metamodell bezeichnete, uebergeordnete Struktur vorgeschlagen, mit deren Hilfe das Produktdatenmodell einheitlich und ueberschaubar dargestellt werden kann. Das Metamodell erleichtert zudem die Erweiterungen des Datenmodells, da Erweiterungen zunaechst auf der abstrakten Ebene des Metamodells behandelt werden koennen und erst in einem zweiten Schritt ausformuliert werden. Um nicht eine Vielzahl von technischen Komponenten abbilden zu muessen, wird ein allgemeines Datenmodell fuer technische Komponenten vorgeschlagen, das mit Hilfe eines abstrakten Datentyps 'Parameter' implementiert wird. Das im Rahmen dieser Arbeit implementierte System ermoeglicht erstmalig, Simulationsmodelle fuer das

  14. Measures for sustainable energy in the livestock farming industry; Maatregelen duurzame energie veehouderijsector

    Energy Technology Data Exchange (ETDEWEB)

    Schellekens, J. [DLV Bouw Milieu en Techniek, Uden (Netherlands)

    2010-07-15

    The sectors of pig farming, poultry farming and veal farming have been examined for sustainable energy deployment options in agricultural businesses. These are systems are ready for practice and to be used by individual businesses. Background information is provided on energy saving, deployment of photovoltaic energy, solar collectors, biomass incineration, heat pumps, air conditioning with ground water, and practical experiences in the deployment of sustainable energy systems. Moreover, an overview is given of subsidies and fiscal opportunities for sustainable energy deployment by agricultural businesses [Dutch] Voor de sectoren varkenshouderij, pluimveehouderij en vleeskalverhouderij is onderzocht wat de toepassingsmogelijkheden zijn van duurzame energie (DE) op agrarische bedrijven. Het betreft systemen welke praktijkrijp zijn en te gebruiken op individuele bedrijven. Er wordt achtergrondinformatie gegeven over energiebesparing, toepassen van photovoltaische energie, zonnecollectoren, verbranden van biomassa, warmtepompen, luchtconditionering met grondwater, praktijkervaringen in de toepassing van duurzame energiesystemen. Ook wordt een overzicht geven van subsidies en fiscale mogelijkheden voor toepassen van DE-systemen op agrarische bedrijven.

  15. Sustainable newly built UPC office in Leeuwarden, Netherlands. Use of surface water for cooling call centre and office building; Duurzame nieuwbouw UPC Leeuwarden. Oppervlaktewater voor koeling callcenter en kantoor ingezet

    Energy Technology Data Exchange (ETDEWEB)

    Groot-D' hondt, E. [Wolter en Dros, Amersfoort (Netherlands)

    2010-10-15

    The municipality of Leeuwarden, Netherlands, and the cable company UPC Netherlands signed contracts for the construction of the UPC headquarters in Leeuwarden, March 2010. The building of the 'greenest' Green Office of the Netherlands, started in June 2010 and is expected to be finalized the end of 2011. Use is made of surface water, rain, heat and cold storage in combination with a heat pump and low temperature systems, such as climate ceilings and floor heating, green roofs, natural insulation, and photovoltaic cells. [Dutch] De gemeente Leeuwarden en UPC Nederland ondertekenden 17 maart 2010 de contracten voor de nieuwbouw van het UPC-hoofdkantoor in Leeuwarden. De bouw van het 'groenste' Green Office van Nederland, startte in juni 2010 en wordt naar verwachting eind 2011 opgeleverd. Er wordt gebruik gemaakt van oppervlaktewater, regenwater, warmte- en koudeopslag in combinatie met een warmtepomp en lage temperatuursystemen, zoals klimaatplafonds en vloerverwarming, groene daken , natuurlijke isolatie, en photovoltaische cellen.

  16. Increasing demand for service: WTS create new jobs and extend their services; Immer mehr Service ist notwendig: WTS schafft neue Arbeitsplaetze und erweitert das Angebot

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2001-07-01

    There is increasing demand for fast, reliable servicing of wind power systems. WTS, an Ibbenbueren-based organisation, offer retrofitting of secondary flow filter systems for lubricating oils, alarm signals for aircraft traffic, the SOBO soft braking system for medium-sized plants, and complete assembly both nationally and internationally (rotors, gearing, offshore systems). [German] Die Nachfrage nach einem schnellen, zuverlaessigen Service rund um die Wind Kraft Anlagen steigt. WTS aus Ibbenbuehren, bisher sehr erfolgreich in der Nachruestung von Nebenstromfilteranlagen fuer Getriebeoele, in der Ausruestung mit Gefahrfeuern fuer die Flugsicherung, in der Nachruestung mittelgrosser Anlagen mit dem SOBO Softbremssystem zur Schonung der wertvollen Bauteile, sowie in der kompletten Anlagenmontage national und international, erweitert das Angebot (fuer den Rotor; das Getriebe und die Planung im Offshore Markt). (orig./AKF)

  17. XML-basierte Produkt- und Prozessdaten für die Leittechnik-Projektierung

    Science.gov (United States)

    Schleipen, Miriam

    Für die Überwachung und Steuerung hochkomplexer Produktionsprozesse werden Prozessleitsysteme eingesetzt. Ständige Veränderungen zwingen Produktionsbetriebe wandlungsfähig zu sein. Entsprechend muss auch die Technik diese Flexibilität unterstützen. Jede Veränderung des Produktionsprozesses muss eingeplant, die Anlagen neu konfiguriert und projektiert werden. Dabei müssen auch neue Prozessbilder für die Bedien- und Steuerungssysteme erstellt werden. Am Fraunhofer IITB wurde ein Engineering-Framework entwickelt, das das Leitsystem automatisch projektiert und die zugehörige Prozessvisualisierung generiert. In diesem Beitrag wird das Modul vorgestellt, dass die Prozessabbilder erstellt. Neben der Visualisierung von Anlagen werden auch laufende Prozesse und bearbeitete Produkte dargestellt. So können beispielsweise Identsysteme mit der Leittechnik gekoppelt werden.

  18. Managing knowledge and information on nuclear safety

    International Nuclear Information System (INIS)

    Hahn, L.

    2005-01-01

    Described is the management of nuclear safety knowledge through education networks, knowledge pool, sharing, archiving and distributing the knowledge information. Demonstrated is the system used at Gesellschaft fuer Anlagen-und Reaktorsicherheit

  19. Solar customers and how to acquire them; Wer ist unser Solarkunde und wie koennen wir ihn gewinnen?

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, W. [Walter Schmitz Marketingberatung, Duesseldorf (Germany)

    2003-07-01

    In May 2002 the new Initiative Solarwaerme Plus was founded in Berlin. In comparison to former activities, this one was not intended as a broad public campaign but a focused marketing project which should help local plumbers to sell more 'Solarwaerme-Anlagen'. The Initiative Solarwaerme Plus started it's activities with two basic marketing research surveys to explore what German consumers and house owners think about thermal solar energy. These two surveys, based on most developed market research methods, achieved lots of new 'know how', which helps the initiative to developed tailor-made information and advertising material. Initiative's marketing people learned that owners of thermal solar energy devices were not mainly motivated by ecological means, but fascinated about the amount of warm water, such a device delivers. (orig.) [German] Im Mai 2002 wurde die neue Initiative Solarwaerme Plus gegruendet. Diese Initiative sollte keine gesellschaftliche Informationskampagne werden, sondern ein konkretes Marketingprojekt, um den Verkauf von Solarwaerme-Anlagen zu foerdern. Ziele der Initiative sind zum Beispiel: (a) Solarwaerme-Anlagen sollen zum selbstverstaendlichen 'Standard' bei der Heizungsmodernisierung werden - nicht nur fuer oekologisch Motivierte, sondern fuer 'Jedermann'. (b) Mittelfristig soll die Abhaengigkeit von der staatlichen Foerderung abgebaut werden. Modernes Marketing basiert jedoch ganz wesentlich auf einer fundierten Datenbasis ueber den Verbraucher. Also wurde seinerzeit beschlossen, mittels Marktforschung eine solche Datenbasis zu beschaffen. (orig.)

  20. Sick building syndrome - results of the 'Proklima' research project; Befindlichkeitsstoerungen in Buerogebaeuden - Ergebnisse aus dem Proklima Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Kruppa, B. [Bundesindustrieverband Heizungs-, Klima-, Sanitaertechnik und Technische Gebaeudesysteme e.V., Bonn (Germany); Bischof, W.; Brasche, S. [Arbeitsgruppe Raumklimatologie der FSU Jena (ARK), Erfurt (Germany); Bullinger-Naber, M. [Hamburg Univ. (Germany). Abt. fuer Medizinische Psychologie; Mayer, E. [Fraunhofer-Institut fuer Bauphysik, Holzkirchen (Germany); Gebhardt, H. [Wuppertal Univ. (Gesamthochschule) (Germany). Inst. fuer Arbeitsmedizin, Sicherheitstechnik und Ergonomie

    2000-07-01

    In the world's biggest research project, the sick building syndrome was investigated in Germany between 1995 and 1999. In all, 8 air-conditioned buildings and 6 non-air-conditioned buildings, 40 space HVAC systems and 1497 places of work were analyzed, and 4,500 persons were asked to provide data. For the first time ever, measured physical, biological and chemical data were compared with the subjective data provided by the inquiry forms. It was found that the concentrations and hygienic status of air conditioning systems do have an effect on subjective comfort. Buildings with well-designed and well-serviced space HVAC systems had better results than buildings without air conditioning systems. However, it is the psychosocial environment and the job description of building inhabitants that decide their response in terms of sick building syndrome. Factors like gender, job satisfaction, job specifications and educational level are more important than space HVAC systems. [German] Im Rahmen eines der weltweit groessten Forschungsprojekte zum Thema 'Sick Building Syndrome' wurden in Deutschland zwischen 1995 und 1999 umfangreiche Untersuchungen durchgefuehrt mit dem Ziel, die Ursachen und Folgen von Befindlichkeitsstoerungen in Buerogebaeuden zu ermitteln. Insgesamt wurden 8 klimatisierte und 6 nicht klimatisierte Gebaeude, 40 raumlufttechnische Anlagen und 1497 Arbeitsplaetze untersucht sowie ueber 4.500 Personen befragt. Die Ergebnisse erlauben zum ersten Mal einen direkten Vergleich der gemessenen physikalischen, biologischen und chemischen Werte mit den subjektiven Angaben (Fragebogendaten) an klimatisierten und nicht klimatisierten Arbeitsplaetzen. Die Auswertung zeigt, dass die Konzentration der Anlagen und deren hygienischer Wartungszustand einen Einfluss auf die Befindlichkeit der Mitarbeiter haben. Gebaeude mit gut geplanten und gewarteten RLT-Anlagen schneiden in der Bewertung sogar besser ab als nicht klimatisierte Gebaeude. Die groessten

  1. Illicit operation of industrial plant subject to licensing, or of other installations within the purview of the German Federal Emission Control Act (BImSchG), which have been shut down for protection against hazards (section 327, subsection 2, No. 1 Penal Code (StGB)); Das unerlaubte Betreiben von genehmigungsbeduerftigen Anlagen oder sonstigen Anlagen im Sinne des Bundes-Immissionsschutzgesetzes, deren Betrieb zum Schutz vor Gefahren untersagt worden ist (Paragraph 327 Abs.2 Nr.1 StGB)

    Energy Technology Data Exchange (ETDEWEB)

    Ocker, A.

    1995-12-31

    The 18th act of 28 March 1980 for amendment of the German Criminal Code (StGB) incorporated the provisions governing the criminal offence of illicit operation of installations subject to licensing into the StGB. These provisions have until then been forming part of the BImSchG (Federal Act on Emission Control). The study in hand presents a discussion of section 327, subsection 2, No. 1 StGB, because this provision represents a fundamental type of an administration accessory criminal offence and thus is suitable to be taken as a basis for an analysis of the scope of problems covered by the StGB, but having an effect on and being interlaced with offences governed by other acts and legal provisions. The study addresses inter alia items such as the object of legal protection defined by this section of the StGB, the provisions defining the licensability of a non-licensed installation in operation, and the consequences of defective decisions under administrative law on the applicability of criminal law provisions. The specific aspects of section 327 StGB, which are of a dominantly administrative nature, are discussed, in particular those referring to the definition of the term ``industrial installation`` as defined by the BImSchG. [Deutsch] Durch das 18. Strafrechtsaenderungsgesetz vom 28.3.1980 wurde der Straftatbestand des unerlaubten Betreibens von Anlagen, die einer Genehmigung nach dem Bundesimmissionsschutzgesetz beduerfen, aus dem BImSchG in das Kernstrafrecht ueberfuehrt. Die vorliegende Untersuchung versucht eine eingehendere Auseinandersetzung mit Para. 327 Abs. 2 Nr. 1 StGB, weil diese Vorschrift als ein Grundtypus der verwaltungsakzessorischen Straftatbestaende die Gelegenheiit zur vertieften Diskussion von umfassenderen strafrechtlichen Problemkreisen gibt. Angesprochen sind insoweit vor allem die Frage des geschuetzten Rechtsgutes der Norm, der Behandlung der materiellen Genehmigungsfaehigkeit eines ungenehmigten Anlagenbetriebs sowie der Auswirkungen von

  2. Analysis of photovoltaic systems. Leadership/cooperation in Task II of the IEA Implementing Agreements Photovoltaic Power Systems, database operation; Analyse des Betriebsverhaltens von Photovoltaiksystemen. Leitung/Mitarbeit im Task II des IEA Implementing Agreements Photovoltaic Power Systems, Betrieb der Datenbank. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schreitmueller, K.; Niemann, M.; Decker, B.; Jahn, U.; Meyer, H.

    2000-02-01

    the analysis of PV systems of the different types addressed in the database are presented and discussed. (orig.) [German] Im Rahmen des Vorhabens wurde an den laufenden Arbeiten im Task II des 'Photovoltaic Power System Programme' (PVPS) der Internationalen Energieagentur (IEA) wesentlich mitgewirkt. Es ist eine zentrale Aufgabe des Task II, das Wissen ueber die Auslegung und das Betriebsverhalten von Photovoltaik(PV)-Systemen zu verbreiten und durch Ansprache geeigneter Zielgruppen die Markteinfuehrung der PV-Technologie voranzutreiben. Dabei stuetzt sich das Vorhaben auf die Erstellung und Aktualisierung einer dezentralen Datenbank, in der sowohl detaillierte Anlagedaten von realisierten PV-Anlagen als auch monatsaufgeloeste Betriebsergebnisse der vermessenen PV-Systeme gesammelt und aufbereitet werden. Ziel der Arbeiten ist es, Informationen ueber Energieertraege, Zuverlaessigkeit und Kosten von verschiedenen PV-Systemen aus der ganzen Welt bereitzustellen und Richtlinien fuer optimale PV-Anlagen in Bezug auf ihr Betriebsverhalten und ihre Auslegung zu entwickeln. Die dezentrale Datenbank auf PC-Basis wurde im ISFH erstellt und konfiguriert. Das Datenbankprogramm besteht aus dem Programm 'PVbase' und dem Programm 'PVreport'. Umfangreiche Softwarewerkzeuge erlauben die Selektion von PV-Anlagen, die graphische und statistische Aufarbeitung der relevanten Daten von PV-Anlagen und den Export von berechneten Jahresmittelwerten. Die Datenbank enthaelt derzeit mehr als 260 PV-Anlagen mit monatlichen Datensaetzen von ueber 600 Betriebsjahren. Neben den allgemeinen Informationen sind Angaben ueber die Art der PV-Anlage (Netzverbund, Insel- oder Hybridanlage), ihre Montageart, ihre verwendeten Komponenten und oekonomische Daten enthalten. Die Datenbank umfasst einen grossen Anteil weltweit realisierter PV-Anlagen mit installierter Messdatenerfassung. Der Nutzen der kontinuierlich verbesserten Datenbank liegt in der Verbreitung von Informationen

  3. Comparison of plant-specific probabilistic safety assessments and lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Balfanz, H.P. [TUeV Nord, Hamburg (Germany); Berg, H.P. [Bundesamt fuer Strahlenschutz, Salzgitter (Germany); Steininger, U. [TUeV Energie- und Systemtechnik GmbH, Unternehmensgruppe TUeV Sueddeutschland, Muenchen (Germany)

    2001-11-01

    Probabilistic safety assessments (PSA) have been performed for all German nuclear power plants in operation. These assessments are mainly based on the recent German PSA guide and an earlier draft, respectively. However, comparison of these PSA show differences in the results which are discussed in this paper. Lessons learned from this comparison and further development of the PSA methodology are described. (orig.) [German] Probabilistische Sicherheitsanalysen (PSA) sind fuer alle in Betrieb befindlichen deutschen Kernkraftwerke durchgefuehrt worden. Diese Analysen basierten in der Regel auf dem aktuellen deutschen PSA-Leitfaden bzw. einem frueheren Entwurf. Ein Vergleich dieser PSA zeigt Unterschiede in den Ergebnissen, die in diesem Beitrag diskutiert werden. Erfahrungen und Erkenntnisse, die aus diesem Vergleich abgeleitet werden koennen, und weitere Entwicklungen der PSA-Methoden werden beschrieben. (orig.)

  4. UV drinking water disinfection with photovoltaic power supply. UV-Trinkwasserentkeimung mit photovoltaischer Stromversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Scharmer, K; Pappers, B; Guenner, C

    1990-06-01

    The study carried out on commission of the BMFT describes in the first three chapters UV disinfectation systems as well as experience gained from their use in industry and developing countries. In the chapter 4-7 special requirements for the use in developing countries are specified and compared to the results of other projects of the BMFT, GTZ and UNIDO. Chapter 5 gives a matrix of cost in which UV and chlorine disinfectation are compared to each other. In the final chapters 8 and 9 test programs and laboratory tests are described which are to serve as basis for planned field tests. (ORU).

  5. Solar air conditioning. Dresden colloquium; Solare Klimatisierung. Dresdner Kolloquium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Subjects: R + D activities in solar air conditioning; dessicative and evaporative cooling (DEC) - systems and components; Chances of solar air conditioning in Europe; Practical experience with solar-assisted air conditioning; Performance of a solar system at Lissabon; DEC system in the Alsenblock building, Berlin; Does solar air conditioning require specially designed buildings; Performance of solar heated adsorption refrigerators; Low-capacity absacity absorption systems for solar air conditioning. [German] Die Kolloquiumsschrift beinhaltet Unterlagen ueber die abgehandelten Themen. Sie lauten: F and E-Aktivitaeten im Bereich Solare Klimatisierung; SGK(DEC-Technik) - ausgefuehrte Anlagen und deren Komponenten; Chancen der solaren Klimatisierung in Europa; Erfahrungen mit der solarunterstuetzten Klimatisierung; Energieverbrauch und Regelung von SGK-Anlagen; Betriebserfahrungen einer Solaranlage in Lissabon; Realisierung der SGK im Alsenblock Berlin; Erfordert die solare Klimatisierung besondere Gebaeude?; Betriebserfahrungen mit solar beheizten Adsorptionskaeltemaschinen; Absorptionsanlagen kleiner Leistung fuer solare Klimatisierung. (orig.)

  6. The present situation of photo-electric plants in the Sahel zone: Possibilities and limits of a marketing strategy using the example of the Niger. Zur gegenwaertigen Situation photovoltaischer Anlagen in der Sahelzone: Moeglichkeiten und Grenzen einer Vermarktungsstrategie am Beispiel des Niger

    Energy Technology Data Exchange (ETDEWEB)

    Hempel, C. (GTZ - Sonderenergieprogramm Niger, Niamey (Niger))

    1993-01-01

    The report is aimed at three targets: First one deals with the meteorological data as the basis for the technical design of photo-electric plants, secondly there is a short survey of the present situation of photo-electrics in Nigeria (referring also to other Sahel countries), and thirdly, the possibilities and limits of a marketing strategy for photo-electric plants are sketched out for this region. (orig.)

  7. On the genesis of articular cartilage. Embryonic joint development and gene expression - implications for tissue engineering

    NARCIS (Netherlands)

    Jenner, F

    2013-01-01

    Articular chondrocytes descend from a distinct cohort of progenitor cells located in the embryonic joint anlagen, termed interzones. Their unique lineage might explain some of the problems encountered using chondrocytes of different lineages for articular cartilage tissue engineering. While it is

  8. Particle reduction strategies - PAREST. Evaluation of emission reduction scenarios using chemical transport calculations. PM10- and NO{sub 2}-immission contributions in Germany. Wood combustion in small combustion systems; installations of the 13th and 17th BImSchV (Federal Immission Control Act). Sub-report.; Strategien zur Verminderung der Feinstaubbelastung - PAREST. Bewertung von Emissionsminderungsszenarien mit Hilfe chemischer Transportberechnungen. PM10- und NO{sub 2}-Immissionsbeitraege in Deutschland. Holzverbrennung in Kleinfeuerungsanlagen, Anlagen der 13. und 17. BImSchV. Teilbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stern, Rainer [Freie Univ. Berlin (Germany). Inst. fuer Meteorologie, Troposphaerische Umweltforschung

    2013-06-15

    This report was prepared within the research project ''Particle reduction strategies - PAREST.'' In this paper with the chemical transport model REM CALGRID following questions were investigated: 1 What is the contribution of the wood-fired small combustion plants in Germany to the PM10- and NO {sub 2}-concentrations? 2 What is the contribution of the 13th and 17th BlmSchV covered installations to the PM10 and NO{sub 2} concentrations in Germany? [German] Der vorliegende Bericht wurde im Rahmen des Forschungs- und Entwicklungsvorhabens ''Strategien zur Verminderung der Feinstaubbelastung'' erstellt. In dem Beitrag werden mit dem chemischen Transportmodell REM-CALGRID folgende Fragestellungen untersucht: 1. Wie hoch ist der Beitrag der mit Holz beheizten Kleinfeuerungsanlagen in Deutschland zu den PM10- und den NO{sub 2}-Konzentrationen? 2. Wie hoch ist der Beitrag der von der 13. und 17. BImSchV erfassten Anlagen zu den PM10-und NO-2-Konzentrationen in Deutschland?.

  9. Parameters for characterisation of the ecochemical soil status and the potential hazards of acidification and nitrogen saturation in level II forest sites; Kennwerte zur Charakterisierung des oekochemischen Bodenzustandes und des Gefaehrdungspotentials durch Bodenversauerung und Stickstoffsaettigung an Level II-Waldoekosystem-Dauerbeobachtungsflaechen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The ad hoc working group on soil acidification and nitrogen saturation of the Federal Government/Laender Working Group level II primarily aimed at drafting a manual for the interpretation of soil data (soil solid phase, soil solution) acquired on Level II plots. The manual contains parameters and proposals for evaluating the acid/base-status of forest soils, the nutrient supply and nitrogen status as well as for assessing the risks caused by aluminium, acid and heavy metal stress. Further parameters and proposals for evaluation concern the risks for spring and ground water quality through acidification and elevated nitrate concentrations. All parameters are described in detail, their informative value is discussed and examples are given for their use. A distinction is made between indicators to show the current ecochemical situation and to describe future risks, e.g. through progressive soil acidification, nutrient depletion and increasing nitrogen saturation. The manual thus fits in right with the overall objectives of the Level II Programme to reveal cause-effect relations in the forest damage situation and to give advice on timely counteraction via forecasts of the future development. (orig.) [German] Das vorrangige Ziel des Arbeitskreises 'Bodenversauerung und Stickstoffsaettigung' der Bundes-Laender-Arbeitsgruppe Level II war die Erarbeitung eines Auswerteleitfadens fuer die Bodendaten (Bodenfestphase, Sickerwasser) der Level II-Flaechen. Der Leitfaden enthaelt Kennwerte und Bewertungsvorschlaege zum Saeure-Base-Zustand des Waldbodens, zur Naehrstoffbereitstellung, zum Stickstoffstatus, zur Abschaetzung von Risiken durch Aluminium-, Saeure- und Schwermetallstress und zur Gefaehrdung des Quell- und Grundwassers durch Versauerung und steigende Nitratgehalte. Alle Kennwerte werden eingehend beschrieben, ihre Aussagekraft diskutiert und ihre Anwendung an Beispielen dargestellt. Unterschieden wird zwischen Indikatoren zur Darstellung der aktuellen

  10. Manual climate protection in city traffic; Leitfaden Klimaschutz im Stadtverkehr

    Energy Technology Data Exchange (ETDEWEB)

    Verron, Hedwig (comp.)

    2010-07-15

    The present brochure of the Federal Environment Agency (Dessau-Rosslau, Federal Republic of Germany) is a manual to climate protection in the city traffic. After description of the potentials of climatic protection five steps to the climatic protection concept as well as the financial aspects are described.

  11. Retinoic acid in developmental toxicology: Teratogen, morphogen and biomarker.

    NARCIS (Netherlands)

    Piersma, Aldert H; Hessel, Ellen V; Staal, Yvonne C

    This review explores the usefulness retinoic acid (RA) related physiological factors as possible biomarkers of embryotoxicity. RA is involved in the morphogenesis of the early embryo as well as in the development and maturation of a wide variety of organ anlagen. The region-specific homeostasis of

  12. Scientific and technical programme parallel to the 'Solarthermie 2000' research and demonstration programme. Final report; Wissenschaftlich-technische Programmbegleitung im Demonstrations- und Forschungsprogramm Solarthermie 2000. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Goering, J.; Freitag, T.; Schirmer, U.

    2000-07-01

    The programme 'Solarthermie 2000' aimed at the testing and optimization of active solar systems, especially for service water heating. Sub-programme 2 was to provide the technical fundamentals and achieve a certain degree of standardization in order to make the technology economically competitive. This necessitated long-term monitoring of a representative number of systems. [German] Im Rahmen des Foerder- und Demonstrationsprogramms Solarthermie 2000, Teilprogramm 2 erfolgt durch die Foerderung von bis zu 100 solarthermischer Anlagen mit Schwerpunkt in den neuen Bundeslaendern eine umfassende Erprobung und Optimierung von Systemen zur aktiven thermischen Sonnenenergienutzung vorwiegend zur Brauchwassererwaermung. Mit dem Teilprogramm 2 sollen die technischen Voraussetzungen fuer einen kuenftigen wirksamen Beitrag der Solarthermie zur Energieversorgung geschaffen und durch Systemstandardisierung die wirtschaftliche Konkurrenzfaehigkeit dieser Anlagen verbessert werden. Ausreichende Erfahrungen mit den unterschiedlichsten Systemkombinationen koennen nur dann gesammelt werden, wenn eine repraesentative Anzahl der diversen Anlagenvarianten errichtet, ueber einen laengeren Zeitraum betrieben und gleichzeitig intensiv beobachtet und analysiert werden. (orig.)

  13. Perichondrium phenotype and border function are regulated by Ext1 and heparan sulfate in developing long bones: a mechanism likely deranged in Hereditary Multiple Exostoses.

    Science.gov (United States)

    Huegel, Julianne; Mundy, Christina; Sgariglia, Federica; Nygren, Patrik; Billings, Paul C; Yamaguchi, Yu; Koyama, Eiki; Pacifici, Maurizio

    2013-05-01

    During limb skeletogenesis the cartilaginous long bone anlagen and their growth plates become delimited by perichondrium with which they interact functionally. Yet, little is known about how, despite being so intimately associated with cartilage, perichondrium acquires and maintains its distinct phenotype and exerts its border function. Because perichondrium becomes deranged and interrupted by cartilaginous outgrowths in Hereditary Multiple Exostoses (HME), a pediatric disorder caused by EXT mutations and consequent heparan sulfate (HS) deficiency, we asked whether EXT genes and HS normally have roles in establishing its phenotype and function. Indeed, conditional Ext1 ablation in perichondrium and lateral chondrocytes flanking the epiphyseal region of mouse embryo long bone anlagen - a region encompassing the groove of Ranvier - caused ectopic cartilage formation. A similar response was observed when HS function was disrupted in long bone anlagen explants by genetic, pharmacological or enzymatic means, a response preceded by ectopic BMP signaling within perichondrium. These treatments also triggered excess chondrogenesis and cartilage nodule formation and overexpression of chondrogenic and matrix genes in limb bud mesenchymal cells in micromass culture. Interestingly, the treatments disrupted the peripheral definition and border of the cartilage nodules in such a way that many nodules overgrew and fused with each other into large amorphous cartilaginous masses. Interference with HS function reduced the physical association and interactions of BMP2 with HS and increased the cell responsiveness to endogenous and exogenous BMP proteins. In sum, Ext genes and HS are needed to establish and maintain perichondrium's phenotype and border function, restrain pro-chondrogenic signaling proteins including BMPs, and restrict chondrogenesis. Alterations in these mechanisms may contribute to exostosis formation in HME, particularly at the expense of regions rich in progenitor

  14. The small high-flyer; Der kleine Drueber-Flieger

    Energy Technology Data Exchange (ETDEWEB)

    Frey, Martin

    2013-06-06

    The monitoring of PV plants is easier than ever before: by using mini-helicopters with built-in thermographic camera, which make defects visible in modules during operation. [German] Die Ueberwachung von PV-Anlagen ist bequem wie nie zuvor: Grund dafuer sind Mini-Helikopter, die mit eingebauten Waermebildkameras Fehler in Modulen im Betrieb sichtbar machen.

  15. Building with future perspectives - the present challenge; Geaeude mit Zukunft - die Herausforderung heute

    Energy Technology Data Exchange (ETDEWEB)

    Kranz, H.R. [Siemens AG, Karlsruhe (Germany)

    1995-12-31

    In chapter 2 of the anthology about building control the following aspects are discussed: planning of electronic flexibility, requirements to plants and system and operation of technical building systems. (BWI) [Deutsch] Kapitel 2 des Sammelbandes ueber Building Control geht auf golgende Themen ein: Planung der elektronischen Gelenkigkeit, Anforderungen an Anlagen und Systeme sowie Betreiben der Technischen Gebaeudesysteme. (BWI)

  16. Corrosion in geothermal plants; Korrosion in geothermischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Milles, Uwe [BINE Informationsdienst, FIZ Karlsruhe - Buero Bonn (Germany)

    2012-12-15

    Geothermal energy can contribute much more than before to the energy supply in Germany. Further-developed technologies being specially adjusted to geothermal energy and its mostly very salty waters are needed for this. Thereby, the mostly reasonable priced avoidance of corrosion at pipes, pumps and heat exchangers is an objective. Among other things, the geothermal research laboratory Gross Schoenebeck (Federal Republic of Germany) fundamentally investigates corrosion processes, the composition of deep waters as well as material properties in order to develop location-independent recommendations.

  17. Die Baukastensystematik in der Fördertechnik

    Science.gov (United States)

    Sebulke, Johannes

    In der Fördertechnik wird kaum ein größerer Einsatzfall so dem anderen gleichen, dass man zwei Anlagen nach denselben Zeichnungen fertigen kann. Konstruktionszeiten, Rüst- und Umstellungszeiten der Fertigung sind hoch; der Kunde muss bei Einzelanfertigung lange Lieferzeiten in Kauf nehmen. In der Fördertechnik haben sich daher Baukastenprinzip, Standardisierung und die Konstruktion von Erzeugnisreihen weitgehend durchgesetzt.

  18. Strongly at the wind; Hart am Wind

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Niels Hendrik

    2013-11-01

    The company Easywind from North Friesland distributes a certified and stromproof small wind turbine. More than 300 systems have been sold. In Germany especially farmers and small businesses meet their needs so. [German] Die Firma Easywind aus Nordfriesland vertreibt eine zertifizierte und sturmfeste Kleinwindanlage. Mehr als 300 Anlagen sind bereits verkauft. In Deutschland decken vor allem Landwirte und kleine Betriebe so ihren Bedarf.

  19. Description and Phylogeny of Urostyla grandis wiackowskii subsp. nov. (Ciliophora, Hypotricha) from an Estuarine Mangrove in Brazil.

    Science.gov (United States)

    Paiva, Thiago da Silva; Shao, Chen; Fernandes, Noemi Mendes; Borges, Bárbara do Nascimento; da Silva-Neto, Inácio Domingos

    2016-01-01

    Interphase specimens, aspects of physiological reorganization and divisional morphogenesis were investigated in a strain of a hypotrichous ciliate highly similar to Urostyla grandis Ehrenberg, (type species of Urostyla), collected from a mangrove area in the estuary of the Paraíba do Sul river (Rio de Janeiro, Brazil). The results revealed that albeit interphase specimens match with the known morphologic variability in U. grandis, morphogenetic processes have conspicuous differences. Parental adoral zone is entirely renewed during morphogenesis, and marginal cirri exhibit a unique combination of developmental modes, in which left marginal rows originate from multiple anlagen arising from innermost left marginal cirral row, whereas right marginal ciliature originates from individual within-row anlagen. Based on such characteristics, a new subspecies, namely U. grandis wiackowskii subsp. nov. is proposed, and consequently, U. grandis grandis Ehrenberg, stat. nov. is established. Bayesian and maximum-likelihood analyses of the 18S rDNA unambiguously placed U. grandis wiackowskii as adelphotaxon of a cluster formed by other U. grandis sequences. The implications of such findings to the systematics of Urostyla are discussed. © 2015 The Author(s) Journal of Eukaryotic Microbiology © 2015 International Society of Protistologists.

  20. Aufbau von regionalen Schülerforschungszentren Berichte und Praxisempfehlungen

    CERN Document Server

    Bayatloo, Annabel

    2013-01-01

    Angesichts des sich verschärfenden Fachkräftemangels ist es wichtig, die vorhandenen Begabungspotenziale noch wirkungsvoller zu identifizieren und auszuschöpfen. Vor allem im Bereich von Mathematik, Informatik, Naturwissenschaft und Technik (MINT) erweist es sich als zielführend, künftig stärker auf forschendes Lernen zu setzen. Dieser pädagogische Ansatz wird auf vorbildliche Weise an Schülerforschungszentren verwirklicht. Aufgrund der Chancen für die Nachwuchsförderung, die mit diesen außerschulischen MINT-Bildungszentren verbunden sind, haben der Deutsche Industrie- und Handelskammertag (DIHK), die IHK Darmstadt, LernortLabor - Bundesverband der Schülerlabore e. V. und die Stiftung Jugend forscht e. V. gemeinsam einen Leitfaden für den „Aufbau regionaler Schülerforschungszentren“ erarbeitet. Die neue Publikation ist als Best Practice-Handreichung konzipiert und soll vor allem regionale Entscheidungsträger in die Lage versetzen, auf diesem Feld selbst aktiv zu werden und den begonnenen Pr...

  1. Open for heating in a team; Offen fuers Heizen im Team

    Energy Technology Data Exchange (ETDEWEB)

    Wilming, Wilhelm

    2013-06-06

    Each heat pump system can be enhanced with a heat generator in the dual-mode operation. It is important to distinguish between systems which are working in the bivalent-alternative, bivalent-parallel, bivalent-partial parallel and monoenergetic mode. [German] Jede Waermepumpenanlage laesst sich, wie andere Heizungsanlagen auch, um einen Waermeerzeuger ergaenzen. Dabei ist zu unterscheiden zwischen Anlagen, die bivalent-alternativ, bivalent-parallel, bivalent-teilparallel und monoenergetisch arbeiten.

  2. Cost management and potential savings in composting. 56th information discussion, Magdeburg, November 1997; Kostenmanagement und Einsparpotentiale bei der Kompostierung. 56. Informationsgespraech in Magdeburg im November 1997

    Energy Technology Data Exchange (ETDEWEB)

    Hangen, H.O. [comp.

    1997-12-31

    This workshop focussed on economic aspects of composting and danaerobic digestion of biological waste. Cost optimisation, methods, and ecological aspects are discussed for several facilities in the Federal Republic of Germany. (SR) [Deutsch] Thema dieses Workshops waren Wirtschaftlichkeitsbetrachtungen auf dem Sektor der Kompostierung und Vergaerung von Bioabfall. Hierbei werden die Kostenoptimierung, verschiedene Verfahren und oekologische Gesichtpunkte am Beispiel verschiedener Anlagen in der Bundesrepublik Deutschland betrachtet. (SR)

  3. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). Annual report 1999

    International Nuclear Information System (INIS)

    Butz, H.P.; Monheimius, I.; Berberich, G.

    2000-01-01

    The aim is to place GRS in a position to be able to adapt to the changed tasks in the nuclear sector, remain competent in all relevant issues of nuclear safety, and maintain an adequate number of qualified staff in spite of the extremely difficult situation with regard to finding junior nuclear engineers. Key elements of this concept are - an adaptation to the expected medium-term reduction of nuclear tasks by socially acceptable cuts in the number of staff over the coming five years, - a concentration of our own competencies, - partnerships with other capable organisations at home and abroad. The major tasks of GRS will remain to perform safety analyses and assessments in the fields of reactor safety, fuel supply, spent fuel management and disposal as well as to carry out nuclear and final repository safety research. (orig.) [de

  4. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 2; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 2: Berechnungsmethoden, aktuelle Modelle und Modellgleichungen

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W; Rogazewski, P; Schindler, M [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A; Albrecht, M; Lambert, M; Steinbach, J [Technische Univ. Berlin (Germany)

    2000-07-01

    At present there are used various of procedures, calculation methods, models and model equations for hazardous incident scenarios. The procedure on principle is varying often. This guideline explains in one main part and six appendixes the methodical procedure to select specifications and assumptions on hazardous incident scenarios and their processing. Hazardous incident scenarios lead to information on emergency preparedness planning. Both general viewpoints and possibilities are shown, how to find necessary basic assumptions on a hazardous incident scenario from information on hazardous substances, on comparable hazardous incidents and on conditions of the site and the plant. Appendixes deal with precise instructions distinguished between substance release, explosion and fire (app. 1: Assessment of source terms, app. 2: Assessment of dispersion, app. 3: Assessment of effects). Appendix 4 gives explanations to appendixes 1, 2 and 3. Appendix 5 contains a collection of 15 examples of hazardous incident scenarios, which illustrate and comment the methodical procedure. Appendix 6 describes and comments software available on German market which assists the calculating of hazardous incidents. Volume 2 determines procedures with regard to methods of calculation, current models and model equations from scientists point of view. (orig.) [German] Derzeit wird eine Vielzahl von Vorgehensweisen, Berechnungsmethoden, Modellen und Modellgleichungen fuer Stoerfallablaufszenarien verwendet. Das prinzipielle Vorgehen ist haeufig unterschiedlich. Dieser Leitfaden enthaelt in einem Hauptteil und sechs Anhaengen das methodische Vorgehen zur Auswahl von Angaben und Annahmen fuer Stoerfallablaufszenarien sowie deren Bearbeitung. Stoerfallablaufszenarien fuehren zu Angaben fuer die Gefahrenabwehrplanung. Fuer das Ableiten von Stoerfallablaufszenarien sind sowohl allgemeine Gesichtspunkte als auch Moeglichkeiten dargelegt, wie man aus Angaben zu Gefahrstoffen, zu vergleichbaren

  5. Determination and calculation of hazardous incident scenarios in accordance with the 3rd hazardous incident administrative instruction. Vol. 1; Ermittlung und Berechnung von Stoerfallablaufszenarien nach Massgabe der 3. Stoerfallverwaltungsvorschrift. Bd. 1: Methodischer Teil zum Erarbeiten von Stoerfallablaufszenarien

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, W.; Rogazewski, P.; Schindler, M. [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg; Acikalin, A.; Albrecht, M.; Lambert, M.; Steinbach, J. [Technische Univ. Berlin (Germany)

    2000-07-01

    At present there are used various procedures, calculation methods, models and model equations for hazardous incident scenarios. The procedure on principle is varying often. This guideline explains in one main part and six appendixes the methodical procedure to select specifications and assumptions on hazardous incident scenarios and their processing. Hazardous incident scenarios lead to information on emergency preparedness planning. Both general viewpoints and possibilities are shown, how to find necessary basic assumptions on a hazardous incident scenario from information on hazardous substances, on comparable hazardous incidents and on conditions of the site and the plant. Appendixes deal with precise instructions distinguished between substance release, explosion and fire (App. 1: Assessment of source terms, App. 2: Assessment of dispersion, App. 3: Assessment of effects). Appendix 4 gives explanations to appendixes 1, 2 and 3. Appendix 5 contains a collection of 15 examples of hazardous incident scenarios, which illustrate and comment the methodical procedure. Appendix 6 describes and comments software available on German market which assists the calculating of hazardous incidents. Volume 2 determines procedures with regard to methods of calculation, current models and model equations from scientists' point of view. (orig.) [German] Derzeit wird eine Vielzahl von Vorgehensweisen, Berechnungsmethoden, Modellen und Modellgleichungen fuer Stoerfallablaufszenarien verwendet. Das prinzipielle Vorgehen ist haeufig unterschiedlich. Dieser Leitfaden enthaelt in einem Hauptteil und sechs Anhaengen das methodische Vorgehen zur Auswahl von Angaben und Annahmen fuer Stoerfallablaufszenarien sowie deren Bearbeitung. Stoerfallablaufszenarien fuehren zu Angaben fuer die Gefahrenabwehrplanung. Fuer das Ableiten von Stoerfallablaufszenarien sind sowohl allgemeine Gesichtspunkte als auch Moeglichkeiten dargelegt, wie man aus Angaben zu Gefahrstoffen, zu vergleichbaren

  6. Design of the intake and outlet areas of turbines; Gestaltung der Zu- und Abstroemung von Turbinen

    Energy Technology Data Exchange (ETDEWEB)

    Ruprecht, A. [Stuttgart Univ. (Germany). Abt. Numerische Stroemungsmechanik

    1997-12-31

    Especially in the case of plants with a small height of drop, efficiency can be substantially impaired. Moreover, an unfavourable design of the inlet area can result in operating problems because of instationary flow phenomena. Similar considerations apply to the draft tube and outflow area. Selected examples are chosen to demonstrate problems and propose improvements. As modelling demands too much effort in the case of small plants, the investigations are carried out using modern numerical flow calculation methods. As demonstrated, inlet and outflow areas can be economically designed using these methods even in the case of small hydro power stations so as to present favourable flow parameters. [Deutsch] Vor allem bei Anlagen mit kleiner Fallhoehe kann der Verlust betraechtlich sein. Darueber hinaus kann eine unguenstige Gestaltung des Einlaufbereichs durch instationaere Stroemungsphaenomene auch zu Problemen beim Betrieb der Anlage fuehren. Aehnliches gilt bei der Gestaltung des Saugrohrs und der Abstroemung. An ausgewaehlten Beispielen werden Probleme dargestellt und Verbesserungsvorschlaege aufgezeigt. Da bei kleinen Anlagen Modellversuche zu aufwendig sind, erfolgen die Untersuchungen mit modernen Methoden der numerischen Stroemungsrechnung. Es wird gezeigt, dass man mit diesen Methoden in der Lage ist, auch bei Kleinwasserkraftanlagen wirtschaftlich eine stroemungsguenstige Gestaltung von Zu- und Abstroemung zu erreichen. (orig.)

  7. Development of a regional concept for energy management for the region of Karlsruhe. Final report; Entwicklung eines regionalen Energiemanagement-Konzeptes und Anwendung auf die TechnologieRegion Karlsruhe. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Rentz, O.; Fichtner, W.; Frank, M. [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Industriebetriebslehre und Industrielle Produktion; Wolf, M.A.; Rejman, M.; Eyerer, P. [Fraunhofer-Institut fuer Chemische Technologie (ICT) (Germany); Reimert, R.; Schulz, A.; Buren, V. v. [Karlsruhe Univ. (T.H.) (Germany). Engler-Bunte-Institut Bereich 1 - Gas, Erdoel und Kohle; Schaefers, B.; Bernart, Y. [Karlsruhe Univ. (T.H.) (DE). Institut fuer Soziologie (IfSoz) (Germany)

    2002-09-01

    Major objectives of this project are: to prepare a cross-disciplinary analysis of all characteristic aspects of the energy supply and demand patterns of a group of selected energy-intensive companies in the Karlsruhe and Rhine harbour area (5 industrial power consumers, 1 utility), to identify practical approaches for optimization and integration of energy and material flows, (networking), and to develop optimised investment and energy supply options within the framework of given conditions. The basis of the optimal solution and energy network presented and explained in detail is a new combined-cycle power plant running as a gas-fired CHP plant, substituting about 50% of the systems formerly used. (orig./CB) [German] Fragestellungen der Effizienzsteigerung und der Verwertung von Abfaellen und Abwaerme gewinnen an Relevanz vor dem Hintergrund der begrenzten Aufnahmekapazitaet der Umweltmedien fuer Schadstoffe. Im Rahmen des Projektes wurde am Beispiel der Region Karlsruhe (5 Industrieunternehmen und 1 EVU) die Entwicklung betriebsuebergreifender Energieversorgungssysteme (Netzwerke) interdisziplinaer analysiert und beschrieben. Zielsetzungen des Projekts waren unter anderem: Bestimmung von zukunftsfaehigen Optionen, intelligente Vernetzung von Energiestroemen, wirtschaftliche Optimierung betriebsuebergreifender Energiemanagement-Loesungen. Die optimale vorgestellte Loesung ist charakterisiert durch den Neubau einer zentralen, gasgefeuerten GuD-Anlage, die etwa die Haelfte der bisherigen Anlagen ersetzt und zusammen mit den weiterhin genutzten Anlagen die Energieversorgung der Unternehmen sicherstellt. (orig./CB)

  8. Consumer behavior in buildings; Nutzverhalten in Gebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The more exact building automation devices have to be designed, the more important is the knowledge about the utilization of the building. It could happen that the state of this devices could be disordered in case of unforseen consumer behavior taking not into account by designing. Therefore in practice limits must be extended because of unknown consumer behavior. On the meeting specialists reported on methods and experiences, how consumer behavior can be influenced in different types of buildings. They mentioned the simulation and the influence of this behavior involving the building automation. Contributions on legal aspects as examples from practice complete the proceeding volume. [German] Je exakter gebaeudetechnische Anlagen dimensioniert werden sollen, um so wichtiger ist die Kenntnis ueber die spaetere Nutzung des Gebaeudes. Es besteht die Gefahr, dass durch unvorhersehbares Verhalten der Nutzer Anlagenzustaende erreicht werden, die bei der Bemessung nicht beruecksichtigt wurden. Deshalb werden in der Praxis bei der Auslegung von TGA-Anlagen oft Zuschlaege wegen unbekanntem Nutzerverhalten eingeraeumt. Auf der Tagung berichteten die Referenten ueber Methoden und Erfahrungen, wie sich das Nutzerverhalten in unterschiedlichen Gebaeudetypen beeinflussen laesst. Sie gingen hierzu auf die Simulation und den Einfluss dieses Verhaltens auf die Gebaeudetechnik ein. Vortraege ueber gesetzliche Rahmenbedingungen sowie Beispiele aus der Praxis schlossen sich an. (orig.)

  9. 48{sup th} Annual meeting on nuclear technology (AMNT 2017). Key topic / Enhanced safety and operation excellence. Technical session: Operation and safety of nuclear installations, fuel

    Energy Technology Data Exchange (ETDEWEB)

    Hollands, Thorsten [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Bereich Reaktorsicherheitsforschung

    2017-12-15

    The sessions Fuel and Materials and Containment and SFP, as part of the Technical Sessions Operation and Safety of Nuclear Installations, Fuel implemented in the Key Topic Enhanced Safety and Operation Excellence were chaired by Dr. Thorsten Hollands (Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH) and Dr. Erwin Fischer (PreussenElektra GmbH) who was the keynote coordinator for the Technical Sessions. Both sessions consist of a keynote lecture followed by technical presentations.

  10. The Flanitzhuette project - solar island electricity supply combined with comprehensive electricity saving measures; Projekt Flanitzhuette - solare Inselstromversorgung in Kombination mit umfassenden Stromsparmassnahmen

    Energy Technology Data Exchange (ETDEWEB)

    Eingartner, M. [Abt. Marketing, Energiedienstleistungen, Regenerative Energien, Bayernwerk AG, Muenchen (Germany); Knapp, R. [Abt. Marketing, Energiedienstleistungen, Regenerative Energien, Bayernwerk AG, Muenchen (Germany); Kranz, U. [Abt. Marketing, Energiedienstleistungen, Regenerative Energien, Bayernwerk AG, Muenchen (Germany)

    1995-10-02

    Since 1992, Bayernwerk AG has been operating a solar island network at Flanitzhuette in the Bavarian Forest, to supply a remote hamlet. The plant is based on a photo-electric system together with a battery and a gas unit. The plant was designed by the least cost planning (LCP) process, ie: The electricity demand was first reduced by economy measures on the customers` side (demand side management, DSM) and then largely coverd by photo-electric supply. In the case of the `Flanitzhuette solar island`, the application of LCP was able to contribute to minimising the supply costs. The authors report on the project and the results in the electricity generation and saving areas. (orig.) [Deutsch] Die Bayernwerk AG betreibt seit 1992 in Flanitzhuette im Bayerischen Wald ein solares Inselstromnetz zur Versorgung eines abgelegenen Weilers. Die Anlage basiert auf einem Photovoltaik-System in Verbindung mit einer Batterieanlage und einem Gasaggregat. Bei der Konzeption der Anlage wurde nach dem Verfahren des Least-Cost Planning (LCP) vorgegangen, d.h. der Strombedarf wurde zunaechst durch wirtschaftliche Massnahmen auf der Kundenseite (Demand-Side Management, DSM) reduziert und erst anschliessend weitgehend photovoltaisch gedeckt. Im Falle der `Solarinsel Flanitzhuette` konnte die Anwendung von LCP zu einer Minimierung der Versorgungskosten beitragen. Die Verfasser berichten ueber das Projekt und die Ergebnisse im Stromerzeugungs- und Stromsparbereich. (orig.)

  11. Von neuen Geschäftsideen zur gelebten Digitalisierung in Utility 4.0 - das Integrierte Geschäftsmodell

    Science.gov (United States)

    Doleski, Oliver D.

    Die Energiewirtschaft benötigt neue, digitale Geschäftsmodelle. Gegenwärtig folgt auf Liberalisierung und Energiewende die nächste Stufe einer weitreichenden Bereinigung des Versorgungsmarktes. Digitalisierung und Dezentralisierung sind heute in aller Munde und verlangen nach neuen Produkten und Dienstleistungen. Dabei wirken die immensen Herausforderungen einer digitalen Energiewelt wie Beschleuniger für die Transformation im Versorgungssektor und tragen damit zur breiten Etablierung von Utilities 4.0 bei. Dieser Entwicklungsprozess vollzieht sich mithilfe unterschiedlicher Methoden zur Realisierung neuer Geschäftsideen. Allerdings greifen die gängigen Konzepte zur Entwicklung von Geschäftsmodellen gerade im Hinblick auf die Berücksichtigung komplexer, unbeständiger Rahmenbedingungen und spezifischer Anforderungen der digitalen Energiewelt mitunter zu kurz. Vor diesem Hintergrund wird das auf dem ganzheitlichen St. Galler Management-Konzept beruhende Integrierte Geschäftsmodell iOcTen als geeignetes Instrumentarium zur Geschäftsmodellentwicklung vorgestellt. Neben der Modellbeschreibung unterstützt ein intuitiv verständlicher Leitfaden den Praktiker bei der Transformation vom klassischen Versorgungsunternehmen zum digitalen Energiedienstleistungsunternehmen.

  12. Mediation in matters of environmental policy and industrial project planning. Theory and case reports; Umweltmediation in Theorie und Anwendung

    Energy Technology Data Exchange (ETDEWEB)

    Oppermann, B.; Langer, K.

    2000-07-01

    The guidebook is intended for regional or local decision-making bodies from industry and society, politics and administration involved in the planning, organisation and performance of public hearings in the context of industrial project planning, technology assessment and compliance with environmental policy and requirements. Participation of the public and conflict resolution are essential aspects of the guidebook which is one in a series of existing and planned publications on a variety of issues of public interest. (orig./CB) [German] Im Bereich technik- und umeltrelevanter Planungen werden immer haeufiger neue Formen der Buergerbeteiligung diskutiert. Die Akademie fuer Technikfolgenabschaetzung in Baden-Wuerttemberg hat es sich seit einigen Jahren zur Aufgabe gemacht, innovative Verfahren der diskursiven Verstaendigung und Konfliktloesung zu erproben und weiterzuentwickeln. Es zeigte sich, dass ein grosser Bedarf nach allgemeinverstaendlichen Praxisanleitungen besteht, so dass die Akademie begonnen hat, Praxis-Leitfaeden z.B. fuer regionale und lokale Entscheidungstraeger aus Politik, Verwaltung, Wirtschaft und Gesellschaft zu erarbeiten, als Hilfestellung bei Planung, Organisation und Durchfuehrung der vorgeschriebenen Verfahren. Neben dem vorliegenden Leitfaden sind auch weitere zu anderen Themen schon erschienen oder in Planung. (orig./CB)

  13. Neue Methoden für die Optimierung verfahrenstechnischer Prozesse

    OpenAIRE

    Hokenmaier, Stephania

    2013-01-01

    Die Verfahrenstechnik beschäftigt sich mit der Trennung, Umwandlung oder Verflüssigung chemischer Stoffe, wie zum Beispiel die Zerlegung von Luft in ihre Hauptbestandteile Sauerstoff, Stickstoff und Argon oder die Reinigung und Verflüssigung von Erdgas. Mit Hilfe von Prozesssimulatoren können verfahrenstechnische Anlagen, oder Teile davon, modelliert, simuliert und anschließend optimiert werden. Die Engineering Division der Linde AG, eines der weltweit führenden Unternehmen für die Planung...

  14. Solarstrom rund um die Uhr: Solarstrom mit Organic Rankine Cycle / erhöhte Solarausbeute / Fraunhofer UMSICHT

    OpenAIRE

    Schmidt, Mirjam; Hunstock, Björn; Bülten, Björn

    2013-01-01

    In einem Gastbeitrag beschäftigen sich die beiden Diplom-Ingenieure Björn Hunstock und Björn Bülten - beide wissenschaftliche Mitarbeiter des Fraunhofer-Instituts für Umwelt-, Sicherheits- und Energietechnik UMSICHT - mit solarthermisch angetriebenen Kraftwerken auf Basis der Organic Rankine Cycle (ORC) Technologie. Sie erläutern, in welchen Fällen und aus welchen Gründen diese als Alternative zu Photovoltaik-Anlagen in Betracht gezogen werden sollten. Sie wagen einen Vergleich der beiden Te...

  15. Counterbalancing the higher mineral oil tax by 10% energy cost savings, or how to convert a low-temperature boiler into a high-efficiency boiler; Eine Antwort auf die Erhoehung der Mineraloelsteuer - Einsparung von durchschnittlich 10% Energiekosten: Wie man einen Niedertemperaturkessel in einen Brennwertkessel umruestet

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, U.

    2000-04-01

    Many low-temperature boilers could be converted into high-efficiency boilers. Further, retrofitting of older systems is possible to meet the exhaust specifications of the Heating Systems Ordinance. All this would help to reduce environmental pollution. [German] Viele Anlagen, die im Niedertemperaturbereich arbeiten, koennen in den Brennwertbereich gebracht werden. Ausserdem ist es moeglich, Kesselanlagen, welche der Abgasnorm nicht gerecht werden, nachzuruesten, um den Abgasverlust nach der Heizungsanlagenverordnung zu erfuellen. Das waere alles im Sinne der Umweltentlastung. (orig.)

  16. Rehabilitation of the natural gas field Thoense with wet transport of natural gas; Sanierung des Erdgasfeldes Thoense unter Anwendung des Erdgasnasstransports

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, W.; Gerhartz, B.; Schmitt, D.; Uphoff, T. [BEB Erdgas und Erdoel GmbH, Hannover (Germany)

    1998-12-31

    Natural gas has been extracted the gas field of Thoense situated at the Northern fringe of the city of Hannover for over forty years. At all 10 bore sites the gas was dried with glycol dryers. While dealing with the problem of hydrocarbon emissions from the dryers it became evident, that some of the very old plants had to be rehabilitated. BEB operates the Thoense field on behalf of Elwerath/Brigitta/Deutz. An integrated concept, based on wet transport of natural gas, was used to remove the emission of hydrocarbons and rehabilitate the surface plants in order to cut operating costs. The field at Thoense is now economically efficient enough to continue operations for a long time. [Deutsch] Aus dem am nordoestlichen Stadtrand Hannovers liegenden Gasfeld Thoense wird seit ueber vierzig Jahren Erdgas gefoerdert. Die Gastrocknung erfolgte dort in ueblicher Weise mit Glykoltrocknungsanlagen an allen zehn Bohrungen. Bei der Bearbeitung des damit verbundenen Problems der Kohlenwasserstoffemissionen aus den Trocknungsanlagen wurde der Sanierungsbedarf an den z.T. sehr alten Anlagen deutlich. Das Feld Thoense wird von BEB fuer das Konsortium Elwerath/Brigitta/Deutz betrieben. Es wird gezeigt, wie mit einem integrierten Konzept auf der Basis des Erdgasnasstransportes die KW-Emissionen beseitigt wurden und gleichzeitig eine betriebskostensenkende Sanierung der obertaegigen Anlagen durchgefuehrt werden konnte. Damit wurde die wirtschaftliche Voraussetzung geschaffen, die Gasversorgung aus Thoense noch lange aufrecht erhalten zu koennen. (orig.)

  17. Conjoined twins: morphogenesis of the heart and a review.

    Science.gov (United States)

    Gilbert-Barness, Enid; Debich-Spicer, Diane; Opitz, John M

    2003-08-01

    Five cases of conjoined twins have been studied. These included three thoracopagus twins, one monocephalus diprosopus (prosop = face), and one dicephalus dipus dibrachus. The thoracopagus twins were conjoined only from the upper thorax to the umbilicus with a normal foregut. These three cases shared a single complex multiventricular heart, one with a four chambered heart with one atrium and one ventricle belonging to each twin with complex venous and arterial connection; two had a seven chambered heart with four atria and three ventricles. The mono-cephalus diprosopus twins had a single heart with tetralogy of Fallot. The dicephalus twins had two separate axial skeletons to the sacrum, two separate hearts were connected between the right atria with a shared inferior vena cava. Thoracopagus twinning is associated with complex cardiac malformations. The cardiac anlagen in cephalopagus or diprosopus are diverted and divided along with the entire rostral end of the embryonic disc and result in two relatively normal shared hearts. However, in thoracopagus twins the single heart is multiventricular and suggests very early union with fusion of the cardiac anlagen before significant differentiation. Cardiac morphogenesis in conjoined twins therefore appears to depend on the site of the conjoined fusion and the temporal and spatial influence that determines morphogenesis as well as abnormally oriented embryonic axes. Copyright 2003 Wiley-Liss, Inc.

  18. New developments of the KOMPOFERM {sup registered} system. Lean gas management, SMARTFERM, double membrane roof; Neue Entwicklungen des KOMPOFERM {sup registered} -Systems. Schwachgasmanagement, SMARTFERM, Doppelmembrandach

    Energy Technology Data Exchange (ETDEWEB)

    Striewski, Sandra [KOMPOTEC Kompostierungsanlagen GmbH, Nieheim (Germany)

    2012-11-01

    The KOMPOFERM {sup registered} dry fermentation process is a mesophilic batch process for biogas production from solid biomass. The system is developed continuously for higher economic efficiency, emission reduction and environmental protection. The contribution describes the optimisations of the KOMPOFERM {sup registered} system and presents examples of its practical implementation, e.g. thermophilic process control, the KOMPOFERM {sup registered} double membrane roof for optimum gas utilisation and reduction of the lean gas volume, the KOMPOFERM {sup registered} plus process with a percolate fermenter below the fermenter tunnels, the automatic feeding system for the rotting and/or fermenter tunnels and SMARTFERM, the dry fermentation module for plants up to 4m000 Mg input. (org.) [German] Als mesophiles Batchverfahren hat sich das KOMPOFERM {sup registered} -Trockenvergaerungsverfahren zur Erzeugung von Biogas aus fester Biomasse am Markt etabliert. Das System wird stetig weiterentwickelt, um die Wirtschaftlichkeit wie auch den Emissions- und Umweltschutz der Anlagen zu verbessern. Die Optimierungen des KOMPOFERM {sup registered} -Systems werden in diesem Artikel erlaeutert und Beispiele fuer deren praktische Umsetzung gegeben, wie die thermophile Prozessfuehrung des Systems, das KOMPOFERM {sup registered} -Doppelmembrandach zur optimalen Gasnutzung und Reduzierung von Schwachgas, das KOMPOFERM {sup registered} plus-Verfahren mit einem Perkolatfermenter unterhalb der Fermentertunnel, das automatische Eintragungsgeraet fuer Rotte- und/oder Fermentertunnel sowie SMARTFERM, das Trockenfermentationsmodul fuer Anlagen bis 4.000 Mg Input. (org.)

  19. Modern plant management in the competitive market

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, B.; Franke, U.; Freitag, J.U. [E.ON Kraftwerke GmbH, Hannover (Germany)

    2002-07-01

    Forced by the deregulation of the energy market and the big drop of electricity prices E.ON Kraftwerke was completely reorganised. Small, flexible units that are focussed on their key tasks were formed. Costs for electricity generation in our plants were reduced. Power plants that are currently not economically efficient are temporarily shut down. Power plants that are permanently not economically efficient are totally shut down. We have now reached a point at which energy prices slowly start to rise again. With our new plant management organization we have a lasting effect on further successfully operating power plants and a positive development of our company. Looking into the future does not create fear about what to do but positive believe that we will soon start new projects. This is the fundament for a stable, successful power plant company. (orig.) [German] Unter dem erheblichen Kostendruck, dem alle Energieversorger derzeit ausgesetzt sind, wurde die Aufbauorganisation von E.ON Energie grundlegend veraendert. Bei E.ON Kraftwerke wurden durch die Schaffung kleiner, flexibler Einheiten und eine klare Konzentration auf das Kerngeschaeft die Kosten fuer die Stromerzeugung in den eigenen Anlagen deutlich gesenkt. Die Auslastung vorhandener wirtschaftlicher Bloecke ist durch die Konservierung von derzeit nicht wirtschaftlichen bzw. durch die Stillegung langfristig nicht wirtschaftlicher Anlagen erheblich verbessert worden. Nachhaltig wurde damit eine Betriebsfuehrungsstrategie entwickelt, die den Bestand und eine positive Entwicklung der Kraftwerksgesellschaft sichert. (orig.)

  20. Incineration with energy recovery

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, T.G.

    1986-02-01

    Motherwell Bridge Tacol Ltd. operate a 'Licence Agreement' with Deutsche Babcock Anlagen of Krefeld, West Germany, for the construction of Municipal Refuse Incineration plant and Industrial Waste plant with or without the incorporation of waste heat recovery equipment. The construction in the UK of a number of large incineration plants incorporating the roller grate incinerator unit is discussed. The historical background, combustion process, capacity, grate details, refuse analysis and use as fuel, heat recovery and costs are outlined.

  1. A congenital malformation of the systemic heart complex in Sepia officinalis L. (Cephalopoda)

    Science.gov (United States)

    Schipp, R.; von Boletzky, S.; Jakobs, P.; Labourg, P. J.

    1998-03-01

    In semi-adult Sepia officinalis L. (Cephalopoda) from the Bay of Arcachon (France) a congenital malformation of the systemic heart is described by macro-and microscopical methods. It concerns an atypical doubling of the site of insertion at the cephalic aorta at the apical ventricle. Its comparison with the paired anlagen of the systemic heart complex in normal embryogenesis and the central circulatory system of Nautilus gives rise to interpret it as a form of atavism. The possible causal role of mutagenic antifoulings is discussed.

  2. Nervous and muscle system development in Phascolion strombus (Sipuncula)

    DEFF Research Database (Denmark)

    Wanninger, Andreas; Koop, Demian; Bromham, Lindell

    2005-01-01

    possible cryptic segmentation patterns. In this paper, we present the first immunocytochemical data on the ontogeny of the nervous system and the musculature in the sipunculan Phascolion strombus. Myogenesis of the first anlagen of the body wall ring muscles occurs synchronously and not subsequently from......Recent interpretations of developmental gene expression patterns propose that the last common metazoan ancestor was segmented, although most animal phyla show no obvious signs of segmentation. Developmental studies of non-model system trochozoan taxa may shed light on this hypothesis by assessing...

  3. Physical utilisation and conversion to energy of wastes arising in the wood industry; Stoffliche und energetische Abfallverwertung in der Holz- und Papierindustrie

    Energy Technology Data Exchange (ETDEWEB)

    Leithner, R. [Technische Univ. Braunschweig (Germany). Inst. fuer Waerme- und Brennstofftechnik; Marutzky, R. [Fraunhofer-Institut fuer Holzforschung, Wilhelm-Klauditz-Institut (WKI), Braunschweig (Germany)

    1998-09-01

    The present paper describes material streams in the paper and wood industry. It also points out possibilities for the physical utilisation and conversion to energy of wood waste and discusses the problems they involve. The authors give a brief overview of the of the plants used for this purpose along with illustrating examples. [Deutsch] Es werden Stoffstroeme in der Papier- und Holzindustrie aufgezeigt. Ferner werden stoffliche und energetische Verwertungsmoeglichkeiten von Holzabfaellen und Probleme dieser Verwertung beschrieben. Auch die Anlagen zu dieser Verwertung und einige Beispiele werden kurz zusammengefasst vorgestellt. (orig.)

  4. Low temperature drying. A case study; Niedertemperatur-Trocknung. Eine Fallstudie

    Energy Technology Data Exchange (ETDEWEB)

    Arauzo, Ivan; Permuy, Diana [STC Sistemas de Transferencia de Calor, S.A., Castellon (Spain)

    2012-07-01

    Incorporating waste treatment processes in systems in which residual energy can be utilized is one of the best residue management alternatives. With an LHV of between 2000 and 4500 kcal/kg, efficiently dried sewage sludge can be used as standard fuel, thereby reducing primary energy consumption and the CO{sub 2} quota. (orig.) [German] Abfallbehandlungsverfahren in Anlagen zur Restenergierueckgewinnung sind eine der besten Reststoffentsorgungsoptionen. Effizient getrockneter Klaerschlamm mit einem unteren Heizwert (Hu) von 2000-4500 kcal/kg kann als Standardbrennstoff eingesetzt werden und zur Verminderung von Primaerenergieverbraeuchen und CO{sub 2}-Emissionen beitragen.

  5. Conditions for a safe boiler operation. Contempt of guilty regulations creates high damage potential; Bedingungen fuer sicheren Kesselbetrieb. Missachtung geltender Vorschriften birgt hohes Schadenpotenzial

    Energy Technology Data Exchange (ETDEWEB)

    Selbach, H.J. [Froeling Heiz- und Trinkwassersysteme GmbH, Overath (Germany)

    2004-07-01

    Operational disturbances and damages should not occure in boilers. However sometimes it happens that even high grade components have an outage after a short service time. The causes, shown in this article, are to be searched within the planning- or installation phase as feedwater quality and erosive combustion air. (GL) [German] Eine Kesselanlage ist ein Wirtschaftsgut. Betriebsstoerungen oder Schaeden duerfen moeglichst nicht vorkommen. Trotzdem passiert es, dass selbst hochwertige Anlagen schon nach kurzer Betriebszeit ausfallen. Die Ursachen hierfuer sind oft in der Planung oder Installation sowie der Qualitaet von Fuellwasser und Verbrennungsluft begruendet. (orig.)

  6. Cost reduction through combined solutions?; Kostensenkung durch Kombinationsloesungen?

    Energy Technology Data Exchange (ETDEWEB)

    Bilitewski, B. [Technische Univ. Dresden (Germany). Inst. fuer Abfallwirtschaft und Altlasten

    1998-09-01

    The implementation of material-specific residue treatment processes requires reconstruction measures both in the case of mechanical-biological and in that of thermal treatment plants. Such measures involves great uncertainties and wide variation in cost prediction. The present paper deals with various factors that influence the costs of residual waste treatment. [Deutsch] Zur Umsetzung der stoffspezifischen Restabfallbehandlung sind Anpassungen sowohl der derzeit betriebenen mechanisch-biologischen als auch der thermischen Anlagen erforderlich, was zu Unsicherheiten und grossen Schwankungsbreiten bei den Kostenprognosen fuehrt. Der Bericht beleuchtet verschiedene Einflussgroessen auf die Kosten der Behandlung des Restabfalls. (orig./SR)

  7. Kurz zum Klima: Zu viel Salz verdirbt den Boden

    OpenAIRE

    Zimmer, Markus; Lippelt, Jana; Frank, Jonas

    2012-01-01

    Der zunehmende Einsatz von Anlagen zur Bewässerung sowie mangelnde Erfahrungswerte und Unkenntnis über den richtigen Einsatz der künstlichen Bewässerung haben in den letzten Jahrzehnten zu einer massiven Zunahme der Versalzung des Bodens geführt. Durch diese Bodenversalzung werden weite Flächen für die Landwirtschaft unbrauchbar. Sie sind nur durch hohen Aufwand und Kosten wieder renaturierbar. Der Beitrag in der Reihe »Kurz zum Klima« gibt einen Überblick über die Versalzung in Anbaugebiet...

  8. Demands on digital automation; Anforderungen an die Digitale Automation

    Energy Technology Data Exchange (ETDEWEB)

    Bieler, P.

    1995-12-31

    In chapter 12 of the anthology about building control the demands on digital automation are presented. The following aspects are discussed: variety of the companies` philosophies, demands of the customer/investor, demands of the use of buildings/rooms, the user, point of view of manufacturer of technical plants. (BWI) [Deutsch] Kapitel 12 des Sammelbandes ueber Building Control stellt die Anforderungen an die Digitale Automation vor. In diesem Zusammenhang wird auf folgende Themenbereiche eingegangen: Spektrum der Firmenphilosophien, Forderungen der Auftraggeber/Investoren, der Gebaeude-/Raumnutzung, der Betreiber sowie Sicht der Ersteller betriebstechnischer Anlagen. (BWI)

  9. Ascertaining the international state of the art of PSA methodology

    International Nuclear Information System (INIS)

    Linden, J. von

    1998-01-01

    Plant-specific PSAs, to be performed within the framework of the Periodic Safety Review of German Nuclear Power Plants require further development of the methodology. For that purpose foreign PSA-guidelines and PSA-reviewes as well as relevant literature are examined and appropriate insights are adopted within task A.2 of project SR 2096. The main goal of these activities is to achieve a comparison of the state of the art of PSA-methodologies applied abroad and in Germany. The German state of the art refers to the extent as is documented in the German PSA Guide (Leitfaden Probabilistische Sicherheitsanalyse /PSUe97/) which has to be used for the Periodic Safety Review of German Nuclear Power Plants. The structure for the evaluation is based on the working steps of a PSA. In total, according to the objectives of the Periodic Safety Review the German approach for plant-specific PSAs based on the German PSA Guide is conform to the state of the art abroad. Identified deviations in some details are evaluated reflecting the view of GRS. Particular aspects resulting from the evaluation should be considered for further development of the German PSA Guide. (orig.) [de

  10. Post-installed concrete anchors in nuclear power plants: Performance and qualification

    International Nuclear Information System (INIS)

    Mahrenholtz, Philipp; Eligehausen, Rolf

    2015-01-01

    Graphical abstract: - Highlights: • Review of qualification and design regulations for anchors in nuclear power plants. • First complete set of nuclear anchor load–displacement data and its evaluation ever. • Demonstration of robust test behavior of a qualified post-installed anchor product. - Abstract: In nuclear power plants (NPPs), post-installed anchors are widely used for structural and non-structural connections to concrete. In many countries, anchor products employed for safety relevant applications have to be approved by the authorities. For the high safety standards in force for NPPs, special requirements have to be met to allow for extreme design situations. This paper presents an experimental test program conducted to evaluate the performance of anchors according to the German Guideline for Anchorages in Nuclear Power Plants and Nuclear Technology Installations (DIBt KKW Leitfaden, 2010). After a brief introduction to anchor behavior and the regulative context, the results of tension and shear tests carried out on undercut anchors are discussed. Robust load capacities and relatively small displacements determined for demanding load and crack cycling tests demonstrated the suitability of anchors qualified according to a state-of-the-art qualification guideline

  11. Control of space HVAC systems. Proceedings. Regelung von raumlufttechnischen Anlagen. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This GMA report presents automation concepts for the control of space HVAC systems using new support methods and means like computer technology and digital simulation methods while considering control problems associated with the application of such methods and means. Both technical and economic aspects are discussed. New findings also concern the structurization and design of control systems, modelling of component and system behaviour for scale-up and simulation of plants. Each of the 10 papers was abstracted for entry into the data base. (HW).

  12. Energy efficiency of induction heating; Energieeffizienz von Anlagen zum induktiven Randschichthaerten

    Energy Technology Data Exchange (ETDEWEB)

    Schuboltz, Stefan; Stiele, Hansjuerg [EFD Induction GmbH, Freiburg (Germany)

    2012-09-15

    Based on increasing prices for energy and growing consciousness for ecology, the energy efficiency of machines has become an important aspect in many sectors of the industry. The significance of the efficiency factor of induction heating systems, which are generating power ratings up to the megawatt-band, has risen up eminently. Due to increasing needs on reliable solutions and high requirements for the components, induction as a tool for surface hardening obtains high demands. (orig.)

  13. Utilization of solar energy by means of photovoltaic cells on a captive balloon. Sonnenstrahlenenergienutzung durch photovoltaische Zellen auf Fesselballon

    Energy Technology Data Exchange (ETDEWEB)

    Scheib, A.

    1988-02-25

    For the use of solar energy photovoltaic cells are used which are deposited on the envelope of a captive balloon which floats over the ground according to the hot air principle in a sufficient height free of atmospheric influences (about 10 km) and whose stay ropes are used for the transfer of generated electric power. The part of the envelope of the balloon equipped with solar cells is to be made as a plane surface and this solar cell surface can be positioned by means of a variation of the free stay rope lengths controlled automatically in an optimal way according to the sun beam direction. In connection with the absence of atmospheric influences, a generation of maximum energy in great constancy during nearly the whole daytime, is made possible.

  14. Better learning in energy-efficient school buildings. A guideline; Besseres Lernen in energieeffizienten Schulen. Leitfaden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Modernization of school buildings involves more than a reduction of energy cost, due to the fact that the room climate of a school affects the learning success of its pupils. Users' demands on architecture and technical systems are highly complex: Rooms are used at different times and for different lengths of time, there are vacation times when the building is not used, and the rooms must meet high demands in terms of air change, lighting, acoustics and blinding as well as in terms of safety, hygiene and pollutant-free air. All this necessitates an integral sanitation concept that takes account of all aspects. Further, the modernization of school buildings should also serve to enhance the pupils' environmental and energy awareness. This guide takes account of all these aspects. (orig./AKB)

  15. Message of the rainforests. A jungle in Vienna; Botschaft der Regenwaelder. Ein Dschungel in Wien

    Energy Technology Data Exchange (ETDEWEB)

    Doeller, M.

    2003-07-01

    A 'rainforest house' is the latest project of the Vienna Zoo, Tiergarten Schoenbrunn. The contribution presents details of the technical facilities of the envisaged building. [German] Durch die in den letzten zehn Jahren erfolgte Modernisierung der Anlagen besitzt der Wiener Tiergarten Schoenbrunn heute internationalen Vorzeigecharakter. Treibende Kraft hinter dieser Entwicklung ist ohne Zweifel Direktor Dr. Helmut Pechlaner. Wie das juengste Projekt ''Regenwaldhaus'' zeigt, stehen dem anerkannten Zoo-Experten in der baulichen Umsetzung seiner Visionen jedoch nicht minder engagierte Planer zur Seite. Allein das gesamte Haustechnikkonzept ist eine ausgetueftelte Zusammenstellung aus verschiedensten Sonderloesungen sowie Systemeigenentwicklungen. (orig.)

  16. Reports on BMBF-sponsored research projects in the field of reactor safety. Reporting period 1 July - 31 December 1995

    International Nuclear Information System (INIS)

    1996-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit informs of the status of LWR tasks and projects on the safety of advanced reactors. Each progress report represents a compilation of individual reports about objectives, the work performed, the results, and the next steps of the works. The individual reports of quality assurance, safety of reactor component, emergency core cooling, lors of coolant, meltdown, fission product release, risk and reliability, are classified according to projects to the reactor safety research program. Another table uses the same classification system as applied in the nuclear safety index of the CEC. (DG)

  17. Optimised utilisation of existing incinerators by installation of upstream reactors for treatment of waste with high calorifica value - HYBRID waste treatment plants; Optimierte Nutzung bestehender Abfallverbrennungsanlagen durch Errichtung vorgeschalteter Reaktoren zur Behandlung heizwertreicher Abfaelle - HYBRID-Abfallbehandlungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    El Labani, M

    2000-07-01

    Abfallverbrennungsanlagen nachtraeglich um leistungsfaehige Rauchgasreinigungssysteme ergaenzt werden. Dies fuehrte zu einem erheblichen Anstieg der Kosten und Behandlungsgebuehren mit dem entsprechenden Druck zur optimierten Nutzung. Zusaetzliche Behandlungskapazitaeten werden benoetigt fuer heizwertreiche Abfaelle. Sie koennen zwar in konventionellen Abfallverbrennungsanlagen fuer Hausmuell behandelt werden, bedingen aber aufgrund des hoeheren Heizwertes eine Durchsatzreduzierung was die Kostensituation weiter negativ beeinflusst. Daher favorisieren aktuelle Konzepte die Behandlung heizwertreicher Abfaelle in spezifischen, dezentralen Anlagen. Die ueblicherweise kleinen Anlagen gehen einher mit hohen Nebenkosten der Errichtung. Zur Abschaetzung des Optimierungspotentials bestehender Abfallverbrennungsanlagen wurde deren Auslastungssituation untersucht. Bei umfangreichen Messkampagnen am MHKW Darmstadt konnte selbst bei 100%iger Auslastung der Verbrennungseinheit in der Rauchgasreinigungsanlage eine Luecke aufgezeigt werden, die durch eine entsprechend angepasste Vorschaltanlage aufgefuellt werden koennte. Eine solche Vorschaltanlage definiert zusammen mit der bestehenden Abfallverbrennungsanlage eine HYBRID-Abfallbehandlungsanlage. Die Bereitstellung eines Instrumentariums zur Unterstuetzung der Entscheidungsfindung bei der Konzeption solcher Anlagen ist Gegenstand dieser Arbeit. (orig.)

  18. New combined plant with integrated solar thermal energy; Neue Kombi-Anlage mit integrierter Solarwaerme

    Energy Technology Data Exchange (ETDEWEB)

    Leithner, R.; Dobrowolski, R.; Gresch, H. [Technische Univ. Braunschweig (Germany). Inst. fuer Waerme- und Brennstofftechnik

    1998-06-01

    In California there are already 350 MW{sub e} worth of solar thermal energy plants in operation on a more or less commercial basis. In these installations thermal oil in parabolic gutters is heated from 300 C to 400 C. The thermal oil passes its thermal energy on to a water vapour circuit via a heat exchanger. The water vapour circuit can also be heated with natural gas, for instance at night when solar energy is not available. However, as yet no existing plant fulfils all three of the following requirements: its construction should entail the lowest possible investment costs and it should be able to run without solar energy and without an expensive storage system; it should have the greatest possible efficiency, especially at times when solar energy is not available (e.g. at night); at the same time, the solar thermal energy should be harvested at the lowest possible temperature so as to make expensive concentrating equipment superfluous. These seemingly contradictory demands are now met by a new concept involving a combined gas and steam plant whose operation is based on the injection of water into the compressed air rather than on a high excess of air. This water is evaporated by solar thermal energy at temperatures below 170 C according to its partial pressure. [Deutsch] Es gibt bereits ueber 350 MWe solarthermische Anlagen in Kalifornien, die mehr oder weniger kommerziell betrieben werden. Bei diesen Anlagen wird Thermaloel von 300 C auf 400 C in Parabolrinnen erhitzt. In einem Waermetauscher gibt das Thermaloel die Waerme an einen Wasserdampfkreislauf ab, der auch mit Erdgas beheizt werden kann, wenn wie z.B. nachts keine Solarwaerme verfuegbar ist. In einem weiteren Schritt wurde vorgeschlagen, das Wasser direkt zu verdampfen. Keine dieser Anlagen genuegt jedoch gleichzeitig den folgenden drei Anforderungen: Die Anlage sollte mit moeglichst niedrigen Investitionskosten gebaut und auch ohne Solarwaerme bzw. ohne aufwendigen Speicher betrieben werden koennen

  19. Photo-induced absorption spectroscopy on organic, photovoltaically active donor-acceptor heterojunctions; Photoinduzierte Absorptionsspektroskopie an organischen, photovoltaisch aktiven Donor-Akzeptor-Heterouebergaengen

    Energy Technology Data Exchange (ETDEWEB)

    Schueppel, Rico

    2007-07-01

    Starting from some general considerations about organic semiconductors first the foundations of molecular crystals, their spectroscopic properties, as well as the mechanisms, on which the exharge-carrier generation is based, are presented. The functionality of the organic solar cells is then explained. The applied experimental techniques are thereafter explained. Special regards gets the photo-induced and transient absorption. Thed the dicyanovinyl-oligothiophene studied in this thesis are presented, whereby the characteristics fitted to the heterojunction with the fullerene C{sub 60} are discussed. Then the photo-induced absorption in this system is presented. In these studies an indirect occupation of the triplet starte of the oligothiophene derivates at the heterojunction with C{sub 60} is observed. The application of the oligothiophene derivates in organic solar cells is thereafter described. Thereby especially the correlation between reached zero voltage and the fitting of the energy levels at the DCVnT:C{sub 60} junction is considered. Furthermore the data of the solar cells are discussed in view of the statements on the charge-carrier separation at the heterojunction with C{sub 60} obtained from the photo-induced absorption.

  20. Heat recovery in sewage sludge gasification systems; Waermerueckgewinnung bei Anlagen zur Klaerschlammvergasung

    Energy Technology Data Exchange (ETDEWEB)

    Lamp, P; Reichel, A; Ziegler, F [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Abt. Energieumwandlung und -speicherung, Garching (Germany)

    1997-12-31

    Using the example of a pilot plant for sewage sludge gasification by the Noell conversion process, the potential for energy optimisation is described. The goals of development are twofold: First, the process stages must be optimized so as to minimize energy consumption and secondly, all options for energy use and energy must be utilized. (orig) [Deutsch] Anhand einer Pilotanlage zur Klaerschlammvergasung nach dem NOELL-Konversionsverfahren sollen Moeglichkeiten der energetischen Optimierung beispielhaft aufgezeigt werden. Ziel muss es sein, zum einen die Verfahrensschritte auf einen moeglichst geringen Energiebedarf hin zu optimieren und zum anderen Moeglichkeiten der Waermeverschiebung und -rueckgewinnung soweit wie moeglich auszunutzen. (orig)

  1. Heat recovery in sewage sludge gasification systems; Waermerueckgewinnung bei Anlagen zur Klaerschlammvergasung

    Energy Technology Data Exchange (ETDEWEB)

    Lamp, P.; Reichel, A.; Ziegler, F. [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Abt. Energieumwandlung und -speicherung, Garching (Germany)

    1996-12-31

    Using the example of a pilot plant for sewage sludge gasification by the Noell conversion process, the potential for energy optimisation is described. The goals of development are twofold: First, the process stages must be optimized so as to minimize energy consumption and secondly, all options for energy use and energy must be utilized. (orig) [Deutsch] Anhand einer Pilotanlage zur Klaerschlammvergasung nach dem NOELL-Konversionsverfahren sollen Moeglichkeiten der energetischen Optimierung beispielhaft aufgezeigt werden. Ziel muss es sein, zum einen die Verfahrensschritte auf einen moeglichst geringen Energiebedarf hin zu optimieren und zum anderen Moeglichkeiten der Waermeverschiebung und -rueckgewinnung soweit wie moeglich auszunutzen. (orig)

  2. Tanne plant - first results of soil treatment according to the anaerobic/aerobic method; Werk Tanne - Erste Ergebnisse der Bodenbehandlung nach dem Anaerob-Aerob-Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, D.; Walter, U. [Umweltschutz Nord GmbH, Ganderkesee (Germany)

    1999-02-01

    Biological remediation of STV contaminated sites has been a major focus of the promotion activities of the Federal Research and Education Ministry (BMFB) for some years now. For this purpose the BMFB has drawn together diverse integrated research projects to bring a well-coordinated force of activities to bear on this problem in a manner unprecedented in Germany. Its declared aim in doing so is, firstly, to compile a guide on biological remediation and, secondly, to funnel the output of all ongoing German research in this field into the second phase of its research activities at the ''Tanne'' plant in Clausthal-Zellerfeld, which is dedicated to practice-oriented testing of methods for the biological remediation of STV contaminated sites. [German] Die biologische Sanierung von Standorten, welche mit STV kontaminiert sind, ist seit einigen Jahren eines der markanten Ziele der BMBF-Forschungsfoerderungen. Durch die bislang in der bundesweiten Forschung einmalige, Forschungsverbund uebergreifende, koordinierte Buendelung saemtlicher wissenschaftlicher Aktivitaeten ist es erklaertes Ziel, zum einen einen Leitfaden zur biologischen Sanierung herauszuarbeiten, zum anderen, die aktuellen, bundesweiten, wissenschaftlichen Erkenntnisse in die seit Mai 1998 am Standort 'Werk Tanne' in Clausthal-Zellerfeld laufende Phase 2 der BMBF-Forschungsaktivitaeten, naemlich die praxisorientierte Erprobung von Verfahren zur biologischen Sanierung von STV-belasteten Standorten, einzugreifen. (orig.)

  3. Germany must become a model for other countries. ``Sustainable consumption`` and its importance against the background of the Agenda 21; Deutschland muss fuer die anderen Laender Vorbild werden. `Nachhaltiger Konsum` und dessen Stellenwert vor dem Hintergrund der Agenda 21

    Energy Technology Data Exchange (ETDEWEB)

    Schafhausen, F. [Bundesministerium fuer Umwelt, Naturschutz und Reaktorsicherheit, Bonn (Germany)

    1998-04-01

    The ``Agenda 21`` was decided at Rio de Janeiro in June 1992. It is to provide a guideline for political action of all parties concerned in the 21st century. Its key concept, ``sustainable develoment``, is a multi-faceted concept which attempts to coordinate ecological, economic and social needs on a medium to long-term basis. Changes in consumption patterns are of central importance. The article goes into detail about these and also about the problems caused by energy and power supply as it is today. (orig.) [Deutsch] Im Juni 1992 wurde in Rio de Janeiro die sogenannten `Agenda 21` als Leitfaden fuer das im 21. Jahrhundert erforderliche Handeln aller Akteure verabschiedet. Im Zentrum dieses Aktionsprogramms steht der schillernde Begriff `sustainable development`. In vierzig Kapiteln, die sich mit allen gesellschaftlichen Gruppen und allen Problemfeldern moderner Gesellschaften auseinandersetzen, wird versucht, `nachhaltige Entwicklung` zu definieren und Wege aufzuzeigen, wie oekologische, oekonomische und gesellschaftliche Anliegen mittel- bis langfristig auf einen Nenner gebracht werden koennen. Von zentraler Bedeutung ist dabei die Frage der Veraenderung der Konsumgewohnheiten. Mit diesem Thema wird ein grosser Teil der in Rio alle Verhandlungen bestimmenden Anliegen angesprochen. Es verwundert nicht, dass auch in diesem Zusammenhang die von der heutigen Energieversorgung verursachten Probleme im Vordergrund stehen. (orig.)

  4. Cell adhesion molecules expression pattern indicates that somatic cells arbitrate gonadal sex of differentiating bipotential fetal mouse gonad.

    Science.gov (United States)

    Piprek, Rafal P; Kolasa, Michal; Podkowa, Dagmara; Kloc, Malgorzata; Kubiak, Jacek Z

    2017-10-01

    Unlike other organ anlagens, the primordial gonad is sexually bipotential in all animals. In mouse, the bipotential gonad differentiates into testis or ovary depending on the genetic sex (XY or XX) of the fetus. During gonad development cells segregate, depending on genetic sex, into distinct compartments: testis cords and interstitium form in XY gonad, and germ cell cysts and stroma in XX gonad. However, our knowledge of mechanisms governing gonadal sex differentiation remains very vague. Because it is known that adhesion molecules (CAMs) play a key role in organogenesis, we suspected that diversified expression of CAMs should also play a crucial role in gonad development. Using microarray analysis we identified 129 CAMs and factors regulating cell adhesion during sexual differentiation of mouse gonad. To identify genes expressed differentially in three cell lines in XY and XX gonads: i) supporting (Sertoli or follicular cells), ii) interstitial or stromal cells, and iii) germ cells, we used transgenic mice expressing EGFP reporter gene and FACS cell sorting. Although a large number of CAMs expressed ubiquitously, expression of certain genes was cell line- and genetic sex-specific. The sets of CAMs differentially expressed in supporting versus interstitial/stromal cells may be responsible for segregation of these two cell lines during gonadal development. There was also a significant difference in CAMs expression pattern between XY supporting (Sertoli) and XX supporting (follicular) cells but not between XY and XX germ cells. This indicates that differential CAMs expression pattern in the somatic cells but not in the germ line arbitrates structural organization of gonadal anlagen into testis or ovary. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Discovery of a new hypotrich ciliate from petroleum contaminated soil.

    Directory of Open Access Journals (Sweden)

    Santosh Kumar

    Full Text Available Pollution after oil spill represents extreme habitat for survival and is a major concern for loss of species diversity in the affected area. In this study, we investigated soil samples collected from a petrochemical industry, Ulsan, South Korea. The soil was in the phase of recovery from the contamination of crude oil spill. Detailed investigation, based on morphology, ontogenesis, and molecular phylogenetic methods, resulted in discovery of a novel hypotrich ciliate, i.e., Metasterkiella koreana n. gen., n. sp., which is morphologically characterized by a semirigid body, undulating membranes in Oxytricha pattern, 18 frontal-ventral-transverse cirri with cirrus V/3 placed posteriorly, one right and one left row of marginal cirri, four dorsal kineties, two dorsomarginal rows, and caudal cirri at the end of dorsal kineties 1, 2, and 4. Interestingly, during ontogenesis, formation of three common anlagen for the proter and the opisthe and involvement of cirrus V/3 in anlagen formation was observed. The dorsal ontogenesis was typical of oxytrichids, i.e., simple fragmentation of dorsal kinety 3 and formation of dorsomarginal rows close to the right marginal row. The new species was found to be similar with Sterkiella subtropica, except for some minor differences in morphometry, and at gene level with only one base pair difference. In phylogenetic analyses, based on SSU rRNA gene sequence, M. koreana cluster in a clade away from Sterkiella species, which could be explained by the differences in the morphogenetic pattern between these two genera. It is proposed that S. subtropica probably belongs to Metasterkiella; however, we do not perform changes and wait for the reinvestigation of its morphogenetic pattern.

  6. Central Role of Core Binding Factor β2 in Mucosa-Associated Lymphoid Tissue Organogenesis in Mouse.

    Science.gov (United States)

    Nagatake, Takahiro; Fukuyama, Satoshi; Sato, Shintaro; Okura, Hideaki; Tachibana, Masashi; Taniuchi, Ichiro; Ito, Kosei; Shimojou, Michiko; Matsumoto, Naomi; Suzuki, Hidehiko; Kunisawa, Jun; Kiyono, Hiroshi

    2015-01-01

    Mucosa-associated lymphoid tissue (MALT) is a group of secondary and organized lymphoid tissue that develops at different mucosal surfaces. Peyer's patches (PPs), nasopharynx-associated lymphoid tissue (NALT), and tear duct-associated lymphoid tissue (TALT) are representative MALT in the small intestine, nasal cavity, and lacrimal sac, respectively. A recent study has shown that transcriptional regulators of core binding factor (Cbf) β2 and promotor-1-transcribed Runt-related transcription factor 1 (P1-Runx1) are required for the differentiation of CD3-CD4+CD45+ lymphoid tissue inducer (LTi) cells, which initiate and trigger the developmental program of PPs, but the involvement of this pathway in NALT and TALT development remains to be elucidated. Here we report that Cbfβ2 plays an essential role in NALT and TALT development by regulating LTi cell trafficking to the NALT and TALT anlagens. Cbfβ2 was expressed in LTi cells in all three types of MALT examined. Indeed, similar to the previous finding for PPs, we found that Cbfβ2-/- mice lacked NALT and TALT lymphoid structures. However, in contrast to PPs, NALT and TALT developed normally in the absence of P1-Runx1 or other Runx family members such as Runx2 and Runx3. LTi cells for NALT and TALT differentiated normally but did not accumulate in the respective lymphoid tissue anlagens in Cbfβ2-/- mice. These findings demonstrate that Cbfβ2 is a central regulator of the MALT developmental program, but the dependency of Runx proteins on the lymphoid tissue development would differ among PPs, NALT, and TALT.

  7. Determination of the agricultural and process-related boundary conditions for the use of rapeseed oil and its refinery products as motor fuel. Final report; Ermittlung der landwirtschaftlichen, prozesstechnischen und verfahrenstechnischen Rahmenbedingungen fuer die Verwendung von Rapsoel und seiner Umwandlungsprodukte als Kraftstoff. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schliephake, D; Hacker, C M

    1994-11-01

    The use of rapeseed oil as a motor fuel is viewed from various angles: Production aspects; environmental aspects; marketing aspects in agriculture; business management aspects in the Federal Republic of Germany; production and refining of rapeseed oil; use of rapeseed oil methyl ester as diesel fuel and in mineral oil processing plants; engine performance. (orig./SR) [Deutsch] In dem vorliegenden Bericht wird der Einsatz von Rapsoel als Kraftstoff aus verschiedenen Blickwinkeln betrachtet: Produktionsaspekte, Umweltaspekte, marktwirtschaftliche Aspekte in der Landwirtschaft; betriebswirtschaftliche Aspekte in der Bundesrepublik Deutschland; Herstellung und Raffination von Rapsoel; Einsatz von Rapsoelmethylester als Dieselkraftstoff und in Anlagen der Mineraloelverarbeitung; Motortechnische Untersuchungsergebnisse. (orig./SR)

  8. List of reports in the field of reactor safety research from BMFT, CEA, EPRI, JSTA and USNRC. Reported period: January 1 to June 30, 1994

    International Nuclear Information System (INIS)

    1994-01-01

    This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning single problems in the field of Reactor Safety Research. According to the cooperation of the Bundesministerium fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (ISTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these reports are available in the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Program of the BMFT, reporting organization. (orig./HP) [de

  9. List of reports in the field of reactor safety research from BMFT, CEA, EPRI, JSTA and USNRC. Reported period: July 1 to December 31, 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This list reviews reports from the Federal Republic of Germany, from France, from Japan and from the United States of America concerning single problems in the field of Reactor Safety Research. According to the cooperation of the Bundesministerium fuer Forschung und Technologie (BMFT) with the Commissariat a l'Energie Atomique (CEA), the Japan Science and Technologie Agency (ISTA), the Electric Power Research Institute (EPRI) and the United States Nuclear Regulatory Commission, these reports are available in the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). The list pursues the following order: Country of origin, problem area concerned, according to the Reactor Safety Research Program of the BMFT, reporting organization. (orig./HP) [de

  10. Radiological information systems: improvements in service, economy, and quality control?; Radiologische Informationssysteme: Verbesserung von Leistungserfassung, Wirtschaftlichkeit und Qualitaetssicherung?

    Energy Technology Data Exchange (ETDEWEB)

    Gross-Fengels, W. [Abt. fuer Klinische Radiologie, AK Harburg (Germany); Weber, M. [Abt. fuer Klinische Radiologie, AK Harburg (Germany)

    1997-03-01

    By means of complete service control and standardized accounting processes, radiological information systems clearly contribute to improved results. They provide the prerequisites for the establishment of expanded networks and allow comprisons with comparable institutions. The quality of patient care can be improved since, for example, the production time from referral to finished result becomes shorter. Direct access to patient and findings data from several positions is possible. Preliminary results can be viewed immediately. The patient`s history is accessible to authorized users at all times. The exact reproducibility and assignment of services leads to more clarity. By means of the information available form RIS, rapid adaptive processes can be undertaken. The system assists the to fulfill the requirements of health regulations. The above-mentioned relationships demonstrate that the EDP systems are well accepted by physicians, medical assistants, and administrators and represent an indispensable aid for solving problems. (orig.) [Deutsch] Radiologische Informationssysteme fuehren ueber komplette Leistungserfassungen und standardisierte Abrechnungsverfahren eindeutig zu einer Ergebnisverbesserung. Sie stellen die Voraussetzungen fuer den Aufbau erweiterter Netzstrukturen dar und erlauben Quervergleiche mit aehnlichen Institutionen. Die Qualitaet der Patientenversorgung laesst sich verbessern, da z.B. die `Produktionszeit` von der Anforderung bis hin zur Befundausgabe kuerzer wird. Der Zugriff zu Patienten- und Befunddaten ist unmittelbar von mehreren Stellen aus moeglich. Vorbefunde sind sofort einsehbar. Die Patientenhistorie ist jederzeit fuer autorisierte Anwender verfuegbar. Die exakte Reproduzierbarkeit und Zuordnung der Leistungen fuehrt zu einer hohen Transparenz. Durch die Informationen, die ueber das RIS zu erhalten sind, koennen rasche Anpassungsprozesse vorgenommen werden. Die Anlagen unterstuetzen den Anwender, den Anforderungen der GSG nachzukommen

  11. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 July - 31 December 2003; Berichte ueber vom Bundesministerium fuer Wirtschaft und Arbeit gefoerderte Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum: 01. Juli - 31. Dezember 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [German] Die Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH informiert im Auftrag des BMWi halbjaehrlich und jaehrlich ueber den Stand der Untersuchungen zur Sicherheit von Kernreaktoren in den Fortschrittsberichten der GRS-F-Berichtsreihe. Jeder Fortschrittsbericht stellt eine Sammlung von Einzelberichten ueber Zielsetzung, durchgefuehrte Arbeiten, erzielte Ergebnisse, geplante Weiterarbeit etc. dar, die von den Forschungsstellen selbst als Dokumentation ihres Arbeitsfortschritts in einheitlicher Form erstellt und von der Forschungsbetreuung (FB) in der GRS im Rahmen der allgemeinen Information ueber die Fortschritte von Untersuchungen zur Reaktorsicherheit herausgegeben werden. Die inhaltliche Gliederung der Berichtssammlung erfolgt durch sachliche Zuordnung der Vorhaben zu uebergeordneten Themenbereichen der Reaktorsicherheitsforschung, ferner nach dem Klassifikationsschema

  12. Solar-assisted district heating system - Scientific study. Solar-assisted district heating system with long-term thermal storage in Friedrichshafen-Wiggenhausen and Hamburg-Bramfeld.. Results of the first year of operation; Solar unterstuetzte Nahwaermeversorgung - Wissenschaftliches Begleitprogramm. Solare Nahwaermeversorgung mit Langzeitwaermespeicher in Friedrichshafen-Wiggenhausen und Hamburg-Bramfeld. Ergebnisse des ersten Betriebsjahres

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, M.E.; Mahler, B.; Hahne, E. [Stuttgart Univ. (Germany). Inst. fuer Thermodynamik und Waermetechnik

    1998-12-31

    The first two pilot plants for solar district heating with seasonal thermal energy storage were put in operation in October 1996. Both projects were initiated by the Institute for Thermodynamics and Thermal Energy Technology (ITW) of the University of Stuttgart that also provided scientific support up to the present. This report presents the results of the first two years of operation of both plants. Both solar plants have been operated without any major problems. The solar energy yield in the first year of operation has only been reduced by the unsatisfactory operation of the heating grid. The most important step towards optimising the plants is the adjustment of the internal heating systems and thus the reduction of the heating temperatures which are currently too high. Based on subject pre-conditions the results projected for the first pilot plants for solar district heating and long-term thermal energy storage will be reached in the following years of operation. (orig.) [Deutsch] Im Oktober 1996 gingen die ersten beiden Pilotanlagen zur solaren Nahwaermeversorgung mit saisonaler Waermespeicherung in Betrieb. Beide Projekte wurden vom Institut fuer Thermodynamik und Waermetechnik (ITW), Universitaet Stuttgart initiiert und ueber die gesamte bisherige Laufzeit wissenschaftlich begleitet. Die Ergebnisse des ersten Betriebsjahres der beiden Anlagen sind in diesem Bericht zusammengestellt. In beiden Faellen funktionieren die Solaranlagen ohne grosse Probleme. Die solaren Ertraege wurden im ersten Betriebsjahr noch durch die unzureichende Betriebsweise der Heiznetze gemindert. Wichtigster Ansatzpunkt fuer eine Optimierung der Anlagen ist die Einregulierung der hausinternen Heizungssysteme und damit die Absenkung der derzeit noch zu hohen Heiznetztemperaturen. Unter dieser Voraussetzung werden die vorausgesagten Ergebnisse fuer die ersten Pilotanlagen zur solaren Nahwaerme mit Langzeit-Waermespeicher in den naechsten Betriebsjahren erreicht werden. (orig.)

  13. Comparison of rigid and swivelling rotor hubs for a MW wind power system, using the example of the WKA Autoflug A 1200; Vergleich von starrer und Pendel-Rotornabe fuer eine Windkraftanlage der Megawatt-Leistungsklasse am Beispiel der WKA Autoflug A 1200

    Energy Technology Data Exchange (ETDEWEB)

    Quell, P. [aerodyn Energiesysteme GmbH, Rendsburg (Germany)

    1996-12-31

    Developments in the MW range are a further illustration of the well-known problem that a linear increase of the rotor surface area will result in an overproportional increase of mass. One classical approach for reducing weight is the installation of a two-blade rotor with a swivelling hub. In the course of the development activities for the 1.2 MW A1200 wind power system of Autoflug Energietechnik GmbH, it was investigated whether a pendulum hub is a technically and economically feasible concept for a plant of this size. For this purpose, two otherwise identical plants were projected and compared, one with a rigid hub and the other with a swivelling hub. Both systems were simulated using the dynamic program GAROS. With the loads thus determined, both concepts are detailed enough to permit a comprehensive cost comparison in consideration of the masses, the resulting cost, performance and reliability. [Deutsch] Der Entwicklungsprozess der Megawatt-Anlagen verdeutlicht den aus frueheren Untersuchungen bekannten Zusammenhang eines ueberproportionalen Massenzuwachses bei linear steigender Rotorflaeche. Ein klassischer Ansatz zur Reduzierung des Anlagengewichtes ist der Einsatz eines Zweiblatt-Rotors in Verbindung mit einer Pendelnabe. Im Rahmen der Entwicklungstaetigkeit fuer die 1,2 MW-Windkraftanlage A 1200 der Fa. Autoflug Energietechnik GmbH wurde untersucht, inwieweit der Einsatz einer Pendelnabe fuer eine Anlage dieser Groessenordnung ein technisch und wirtschaftlich sinnvolles Konzept darstellen kann. Dazu wurden zwei grundsaetzlich gleiche Anlagen mit Zweiblatt-Rotor unter Verwendung einer Pendelnabe und einer starren Nabe konzipiert und gegenuebergestellt. Zur Bewertung des Anlagenverhaltens sowie zur Ermittlung realitaetsnaher Belastungen werden sowohl die Anlagenversion mit Pendelnabe als auch die Version mit starrer Nabe mit dem Dynamikprogramm GAROS simuliert. Basierend auf den ermittelten Lasten werden beide Konzepte so detailliert, dass ein umfassender

  14. 2017 German refrigeration and air conditioning meeting. Proceedings; Deutsche Kaelte- und Klimatagung 2017. Tagungsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-07-01

    This year's lecture programme includes 117 presentations in the five working departments of DKV and 10 lectures at the special event ''Energy-efficient air conditioning in data centres''. The main topics in the respective departments were: (1) Cryogenics: Space applications; Cryogenic plants; Cryomedicine and cryobiology; Components, developments; Processes and plants; Valves, design. (2) Basics: Evaporation, material values; evaporation, condensation; absorption; adsorption, latent storage; cycle simulation. (3) Components: CO{sub 2} plant engineering and components; refrigerants; process control, adsorption, sublimation and storage technology; refrigerating machine oils, heat exchangers and corrosion; components 4.0, sensors and control technology; simulation of plant processes. (4) Cold application: Application; Application / Natural Refrigerants; Mobile Applications Car; Mobile Applications; Supermarket / Efficiency; Optimization / Efficiency. (5) Air conditioning and heat pump applications: load shifting, smart home, flexibility; heat sources and industrial heat pumps; modelling, simulations; energy concepts heat pumps and photovoltaics; monitoring, evaluation; technology trends / working materials. Six papers are separately analyzed for this database. [German] Das Vortragsprogramm umfasst in diesem Jahr 117 Beitraege in den fuenf Arbeitsabteilungen des DKV und 10 Vortraege in der Sonderveranstaltung ''Energieeffiziente Klimatisierung in Rechenzentren''. Die Hauptthemen in den jeweiligen Arbeitsabteilungen waren: (1) Kryotechnik: Raumfahrtanwendungen; Kryo-Grossanlagen; Kryomedizin und Kryobiologie; Komponenten, Entwicklungen; Verfahren und Anlagen; Ventile, Auslegung. (2) Grundlagen: Verdampfung, Stoffwerte; Verdampfung, Kondensation; Absorption; Adsorption, Latentspeicher; Kreislaufsimulation. (3) Komponenten: CO{sub 2}-Anlagentechnik und Komponenten; Kaeltemittel; Prozessfuehrung, Adsorption, Sublimation und

  15. Quality assurance for photovoltaic energy supply. Final report; Qualitaetssicherung von photovoltaischen Energieversorgungssystemen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bopp, G.; Gabler, H.; Hille, G.; Puls, G.; Rehm, M.; Sauer, U.; Schulz, M.; Schweizer-Ries, P.

    2000-07-01

    The availability of isolated PV systems was to be improved by an inspection agreement between operators, users and inspection organisations. The systems were to be inspected and serviced once a year. In all, 22 systems were inspected regularly between 1996 and 1999, and a failure statistics was drawn up on the basis of the records. On average, there were three failures per system and per year, one of which was caused by research activities. In a second detailed analysis after termination of the project, the failure rate had decreased to one every two years, i. e. a reduction by a factor of 6. [German] Ziel des Projektes war die Erhoehung der Betriebssicherheit und der Lebensdauer netzunabhaengiger Photovoltaikanlagen (Inselanlagen) durch Ermittlung und Reduzierung des Wartungsbedarfs sowie durch Komponentenoptimierung. Zu Projektbeginn war der technische und finanzielle Umfang von Wartungsarbeiten und somit den Betriebskosten dieser Anlagen nur sehr lueckenhaft bekannt und vorhersehbar. Um belastbare Erkenntnisse ueber den Wartungsbedarf und -kosten zu erhalten, fuehrten ortsansaessige Firmen mit Hilfe von Wartungshandbuechern auf Kosten der Betreiber in 22 ausgewaehlten Inselanlagen 4 Jahre lang 1 mal jaehrlich eine Fruehjahrskontrolle und eine Herbstinspektion durch. Das Fraunhofer ISE erstellte eine Fehlerstatistik, analysierte die Fehler und den Optimierungsbedarf. Durch die einmal jaehrliche Inspektion und durch den Einsatz optimierter Komponenten liess sich die anfaengliche Fehlerrate von 3 Fehlern pro Jahr und Anlage auf 1 Fehler innerhalb von 2 Jahren reduzieren. Die Anlagenfehler wurden ueberwiegend durch alterungsbedingte Bauteildefekte in Komponenten verursacht. Zusammen mit Herstellern wurde an Komponenten, wie Ladereglern und Wechselrichtern, Optimierungen durchgefuehrt. Die Optimierung der Anlagenbetriebsfuehrung erhoehte deutlich die Zufriedenheit des Nutzers und die Batterielebensdauer. Die Stromgestehungskosten in optimierten und regelmaessig

  16. Frequency converters increase the energy efficiency of electric motors in refrigerators; Frequenzumrichter steigern die Energieeffizienz von Elektromotoren in Kaelteanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Heide, Alexander [Ziehl-Abegg AG Produktmanagement System- und Regeltechnik, Kuenzelsau (Germany)

    2011-07-01

    Refrigerators have vast potential for energy conservation. Blowers mounted on condensers and recirculation coolers are commonly controlled via phase angle control. It is shown how modern frequency converters can improve the energy balance of existing systems. The advantages of a combination of frequency converter and sinus filter are explained by the example of the Fcontrol frequency converter, which has an integrated all-phase sinus filter. Retrofitting is easy, and the payback period will be short. An example is presented to show that more than 50 % of the energy cost can be saved this way. In addition to blower control, also the compressor motor can be controlled by frequency converters, with advantages for the whole refrigerating system. The paper shows how retrofitting of modern frequency converters will reduce the energy cost and operating cost of existing refrigeration systems. [German] Kaelteanlagen, insbesondere bestehende Kaelteanlagen, bieten grosses Potenzial Energie einzusparen. Ventilatoren, die auf Verfluessigern oder Rueckkuehlern montiert sind, werden ueberwiegend mit Regelgeraeten betrieben, die die Drehzahl ueber die Spannung variieren (Phasenanschnittregelung). Es wird aufgezeigt, dass durch moderne Frequenzumrichter auf einfache Art und Weise bestehende Anlagen energetisch verbessert werden koennen. Am Beispiel des Frequenzumrichters Fcontrol, der einen allpolig wirksamen Sinusfilter integriert hat, werden die Vorteile durch die Kombination von Frequenzumrichter und Sinusfilter erklaert. Die nachtraegliche Installation in bestehende Anlagen ist einfach. Die Investition in eine solche Umruestung rechnet sich in der Regel sehr schnell. Beispielhaft wird gezeigt, dass beim Ersetzen der Phasenanschnittregelung gegen einen Frequenzumrichter mehr als 50 % der Energiekosten an den Ventilatoren eingespart werden koennen. Neben der energiesparenden Regelung der Ventilatoren auf Verfluessigern oder Rueckkuehlern, kann auch der Verdichtermotor durch

  17. Computer-aided preparation of specifications for radial fans at VEB Lufttechnische Anlagen Berlin

    Energy Technology Data Exchange (ETDEWEB)

    Kubis, R.; Kull, W.

    1987-01-01

    The specification details the scope of delivery for radial fans on a standard page and also serves the preparation for production. In the place of previous manual preparation, a computer-aided technique for the office computer is presented that provides the technical parameters from data files out of few input data to identify the fan type. The data files and evaluative programs are based on the software tool REDABAS and the SCP operating system. Using this technique it has been possible to cut considerably the preparation time for the incoming orders.

  18. Market conditions for cogeneration plants. Ensuring efficiency; Marktbedingungen fuer KWK-Anlagen. Wirtschaftlichkeit sicherstellen

    Energy Technology Data Exchange (ETDEWEB)

    Ottersbach, Joerg; Otto, Falk; Schrader, Knut [BET Buero fuer Energiewirtschaft und Technische Planung GmbH, Aachen (Germany)

    2013-07-15

    Due to declining wholesale prices for electricity, the profitability of base load power and heat generation plants decreases significantly. Therefore, concepts such as the increased use of electricity or natural plant flexibility have to be developed. The improved framework conditions by means of the amended Combined Heat and Power Act are helpful. When modernising plants, it is even possible under favorable conditions and with a good concept to fully refinance the investment on the CHP surcharges.

  19. Energy efficiency of uninterruptible power supply systems (UPS); Projekt Energieeffizienz von USV-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schnyder, G.; Mauchle, P.

    2005-03-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) summarises and presents nine individual reports and documents concerning the topic of uninterruptible power supplies. The documents compiled for the Swiss Federal Office of Energy in earlier projects concerning the quality and energy efficiency of uninterruptible power supply (UPS) systems dating from 1998 to 2000 have been revised and expanded in collaboration with a UPS Systems 'Trendwatch' group. The central documents such as 'Optimised use of UPS systems', 'Measurement procedures for UPS systems', 'Label for UPS systems' and 'Quality/Energy matrix' have been translated into English. These documents form the basis for the international distribution of the studies and findings relating to the quality and energy efficiency of UPS systems. These results are to be distributed by both European as well as American commissions. A label and codes of conduct are being developed. The nine individual reports are summarised in separate abstracts also recorded in the ETDEWEB database.

  20. Gasification of biomass - principles and technical alternatives; Vergasung von Biomassen - Prinzipien und technische Moeglichkeiten

    Energy Technology Data Exchange (ETDEWEB)

    Klose, E [Technische Univ. Bergakademie, Freiberg (Germany)

    1997-12-31

    The technical principles of gasification are outlined, and a number of biomass gasification processes are presented and compared with the coal gasification process. On the basis of the knowledge gained in coal gasification, it will be easy to carry out the development work still required on small-scale biomass gasification systems in cooperation with the gas users. (orig) [Deutsch] Das technische Prinzip derVergasung und verschiedene Verfahrensweisen bei der Vergasung von Biomasse werden vorgestellt und mit der Kohlevergasung verglichen. Auf der Grundlage der technischen Erkenntnisse bei der Kohlevergasung einschliesslich der vor- und nachgeschalteten Prozessstufen sind die noch notwendigen verfahrens- und apparatetechnischen Entwicklungsarbeiten fuer vorwiegend kleine Anlagen in Zusammenarbeit mit den Gasnutzern durchfuehrbar. (orig)

  1. Gebändigtes Knallgas: Brennstoffzellen im mobilen und stationären Einsatz

    Science.gov (United States)

    Waidhas, Manfred; Landes, Harald

    2001-07-01

    Die Brennstoffzelle hat aus technischer Sicht einen hohen Stand erreicht. Die PEMFC konnte ihre Zuverlässigkeit in einer Reihe von Nischenanwendungen, aber auch in Form erster mobiler und dezentraler Prototypen beweisen. Die SOFC und die MCFC konnten bereits in Anlagen von 100 kW und mehr in Erprobung gehen. Um jedoch wirtschaftlich konkur-renzfähig zu den etablierten Technologien der mobilen und dezentralen Energiewandlung zu werden, muss noch eine drastische Kostenreduktion sowohl beim Brennstoffzellen-Stack als auch bei den zu seinem Betrieb notwendigen Hilfsaggregaten erreicht werden. Für Fahrzeugantriebe muss außerdem eine Antwort auf die noch offene Treibstofffrage (Infrastruktur, H2-Erzeugung und H2-Speicherung) gefunden werden.

  2. Gasification of biomass - principles and technical alternatives; Vergasung von Biomassen - Prinzipien und technische Moeglichkeiten

    Energy Technology Data Exchange (ETDEWEB)

    Klose, E. [Technische Univ. Bergakademie, Freiberg (Germany)

    1996-12-31

    The technical principles of gasification are outlined, and a number of biomass gasification processes are presented and compared with the coal gasification process. On the basis of the knowledge gained in coal gasification, it will be easy to carry out the development work still required on small-scale biomass gasification systems in cooperation with the gas users. (orig) [Deutsch] Das technische Prinzip derVergasung und verschiedene Verfahrensweisen bei der Vergasung von Biomasse werden vorgestellt und mit der Kohlevergasung verglichen. Auf der Grundlage der technischen Erkenntnisse bei der Kohlevergasung einschliesslich der vor- und nachgeschalteten Prozessstufen sind die noch notwendigen verfahrens- und apparatetechnischen Entwicklungsarbeiten fuer vorwiegend kleine Anlagen in Zusammenarbeit mit den Gasnutzern durchfuehrbar. (orig)

  3. Planning and building a gas cave store in Bremen-Lesum; Planung und Errichtung von einem Gaskavernenspeicher in Bremen-Lesum

    Energy Technology Data Exchange (ETDEWEB)

    Kossert, J.; Schultz, K.F. [Mobil Erdgas Erdoel GmbH, Celle (Germany)

    1998-12-31

    In order to supply sufficient natural gas to the Northern part of Germany Mobil set up a gas cave storage in Bremen Lesum. Drilling- and brine engineering, plant design, electricity supply, brine plant are described. Remote control, personnel planning, operational experience and plants for gas operation as well as pipelines, compressors and gas drying are described. [Deutsch] Um kuenftig den Spitzenbedarf nach umweltfreundlichem Erdgas in Norddeutschland befriedigen zu koennen, errichtete Mobil einen Gaskavernenspeicher in Bremen Lesum. Im Folgenden wird die Bohr-und Soltechnik, die Anordnung der Anlagenteile, die Elektroversorgung der Solanlage sowie der Solbetrieb naeher erlaeutert. Ausserdem werden die Fernueberwachung, der Personaleinsatz, die Betriebserfahrungen und die Anlagen fuer den Gasbetrieb wie Verbindungsleitung, Kompressoranlage und Gastrocknungsanlage beschrieben.(msk)

  4. Operating experience with innovative environmental technologies; Betriebserfahrungen mit innovativen Umwelttechnologien

    Energy Technology Data Exchange (ETDEWEB)

    Spindler, H.; Bauermeister, U.; Kliche, H.; Seiffarth, K. (comps.)

    2000-03-01

    The MUT '99 (Merseburger Umwelt-Tag) discussed modern processes, technologies and plants for treatment and utilisation of waste. The conference was attended by industrial organisations and scientific institutions. [German] Der 9. Merseburger Umwelt-Tag MUT '99 steht unter dem Motto 'Betriebserfahrungen mit innovativen Umwelttechnologien - Moderne wirtschaftliche Verfahren, Technologien und Anlagen zur Behandlung/Verwertung nichtvermeidbaren Abfalls', wobei der Begriff 'Abfall' sich letztlich auf alle Umweltmedien bezieht. Entsprechend dem Motto dieser Tagung stellen Unternehmen, Betriebe und wissenschaftliche Einrichtungen ihre Erfahrungen auf dem Gebiet der Umwelttechnologien vor, um Entwicklungen auf diesem Gebiet einer breiten Diskussion zu eroeffnen. Dabei soll es insbesondere um die Behandlung nicht vermeidbarer Abfaelle und Abwaesser gehen. (orig.)

  5. Preservation of competence within the framework of knowledge management of GRS

    International Nuclear Information System (INIS)

    Beraha, D.; Erven, U.; Puhr-Westerheide, P.

    2006-01-01

    As a consequence of the loss of competence threatening to arise from the retirement of many experts, countermeasures in the form of expanded and improved training schemes and the development of knowledge management have been introduced by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH. The new modules of basic as well as specialized training are described. A brief outline is given of the GRS Intranet portal with its integrated document management. The development of a portal for each project allows all project-related information to be combined. An account is presented of initial experience in using methods of knowledge representation and display, and an outlook is given into expected further developments. (orig.)

  6. Artificial intelligence system for the monitoring of natural gas production systems; Intelligente Ueberwachung von Erdgasfoerderanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Tschaetsch, H.U.

    2001-02-01

    The article explains a novel, artificial intelligence-based system called HISS (Human Interface Supervision System) which has been installed as a prototype for the monitoring of a natural gas production site at Thoense near Hannover/Germany. The system is capable to perform audio-visual and smelling functions, analogous to the human sensory perception. (orig./CB) [German] Die Aufrechterhaltung eines einwandfreien Betriebszustandes von technischen Anlagen durch staendige Kontrollen und regelmaessige Wartungsarbeiten ist haeufig eine aufwendige und kostspielige Angelegenheit. Gleichwohl ist sie - sowohl was die Frage der Sicherheit als auch des Umweltschutzes anbelangt - unentbehrlich. Die Erdgasfoerderanlage Thoense bei Hannover wird von einem intelligenten Ueberwachungssystem, HISS - Human Interface Supervision System, kontrolliert, das die menschlichen Eigenschaften sehen, hoeren und riechen beherrscht. (orig.)

  7. Solarthermie 2000. Sub-programme 2: Solar thermal demonstration projects in public buildings in East Germany - Scientific and technical studies accompanying construction and operation of solar thermal demonstration plants in the states of south western Germany. Final report; Solarthermie 2000. Teilprogramm 2: Solarthermische Demonstrationsanlagen fuer oeffentliche Gebaeude mit Schwerpunkt in den neuen Bundeslaendern - Wissenschaftlich-technische Begleitung der solarthermischen Demonstrationsanlagen in den suedwestlichen Bundeslaendern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bollin, E.; Himmelsbach, S.; Klingenberger, U.M.

    2002-06-01

    Exemplary solar thermal power systems with a minimum collector surfaces of 100 square metres are presented, improved and optimized. Their competitive strength is to be improved by reducing the specific system cost and raising the specific useful power generation. [German] Im Programm 'Solarthermie-2000' Teilprogramm 2 soll anhand von Beispielloesungen fuer groessere solarthermische Anlagen mit einer Mindestkollektorflaeche von 100 m{sup 2} an unterschiedlich genutzten Gebaeuden nachgewiesen werden, dass im Bereich der thermischen Solarenergienutzung technisch gute Loesungen zur Verfuegung gestellt werden koennen. Diese Systemloesungen sollen weiter verbessert und angepasst werden. Zugleich soll erreicht werden, dass die wirtschaftliche Konkurrenzfaehigkeit gesteigert wird, indem durch Reduzierung der spezifischen Systemkosten und Erhoehung des spezifischen Nutzenergieertrages die solaren Nutzwaermekosten gesenkt werden. (orig.)

  8. Computerized monitoring and online information system for energy and facility management service providers. Outsourcing of management and maintenance services; Informationssystem mit Online-Service fuer Dienstleistungsanbieter. Service und Wartung kostenguenstig gestalten

    Energy Technology Data Exchange (ETDEWEB)

    Niclas, C. [Segno Industrie Automation GmbH, Bremen (Germany)

    2002-07-01

    The article addresses the emerging new business opportunities of service companies as contractors in the energy sector. Outsourcing and contracting models and in particular the computer architecture and the software and programming of available online systems are discussed. (orig./CB) [German] Regionale und kommunale Versorgungsunternehmen, Krankenhaeuser, Druckereien sowie produzierende Unternehmen koennen sich voll und ganz auf ihr Kerngeschaeft konzentrieren und einen Service- und Wartungsdienst kostenguenstig outsourcen. Serviceorientierte Dienstleister werden im gleichen Zuge durch Einsatz eines Service-Informationssystems in die Lage versetzt, Versorgungs- und Betreuungskonzepte optimal anzubieten. Langfristige Kundenbindungen sowie eine Verbesserung der Kundennaehe sind die Erfolge. Optimierung von Kunden-Anlagen und Einbindung in zukuenftige Investitionsmassnahmen seien an dieser Stelle nur als moegliche Zusatzgeschaefte zu erwaehnen. (orig.)

  9. 2013 German refrigeration and air conditioning meeting. Proceedings; Deutsche Kaelte- und Klimatagung 2013. Tagungsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    These proceedings cover the following main topics: cryoengineering - superconduction / energy storage; cryoapplications in biology and medicine; metrology; adsorption processes; condensation/evaporation; working fluids / simulation; ice production; plants and compressors; expansion and ejectors or recooling; use of cooling (passenger car air conditioning, supermarket); refrigerants; plant efficiency; emissions and legislation; air conditioning and use of heat pumps; air quality and control; building technology and block-type thermal power stations. [German] Dieser Tagungsbericht enthaelt folgende Themenschwerpunkte: Kryotechnik - Supraleitung/Energiespeicher; Kryoanwendungen in der Biologie und Medizin; Messtechnik; Adsorptionsprozesse; Kondensation/Verdampfung; Arbeitsfluide/Simulation; Eiserzeugung; Anlagen und Verdichter; Expansion und Ejektoren bzw. Rueckkuehlung; Kaelteanwendung (PKW-Klimatisierung; Supermarkt); Kaeltemittel; Anlageneffizienz; Emissionen und Gesetzgebung; Klimatechnik und Waermepumpenanwendung; Luftqualitaet und Regelung; Gebaeudetechnik und BHKW.

  10. Guidelines for operator competence - Optimising facility management processes; Leitfaden Betreiberkompetenz. Schritt fuer Schritt Facility Management Prozesse optimieren

    Energy Technology Data Exchange (ETDEWEB)

    Moser, R

    2005-06-15

    This brochure issued by IFMA (International Facility Management Association) Switzerland and the Swiss Federal Office of Energy (SFOE) presents interactive guidelines for energy management in the area of facility management. These guidelines are based on the results of a project carried out by the International Energy Agency's Annex 40 'Operator competence'. The guidelines provide a step-by-step guide from initial analysis through to successful project completion and answer many questions that may crop up during the process. The focus is placed on energy aspects. Tools and 14 sample process descriptions are provided along with practical examples. Theoretical aspects are also presented and discussed, including models for operator roles and the processes involved. Also, change, risk and knowledge management are examined. Notes and information on possibilities for further education are presented.

  11. Sun and architecture - design guideline. Sonne und Architektur - Leitfaden fuer die Projektierung; A - Potential der passiven Sonnenenergienutzung

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The following topics are dealt with: types of utilisation, position and climate, building design. The appendix deals with comfort, meteorological data and the casting of shadows on the front wall. figs., tabs.

  12. Guidelines for operator competence - Optimising facility management processes; Leitfaden Betreiberkompetenz. Schritt fuer Schritt Facility Management Prozesse optimieren

    Energy Technology Data Exchange (ETDEWEB)

    Moser, R.

    2005-06-15

    This brochure issued by IFMA (International Facility Management Association) Switzerland and the Swiss Federal Office of Energy (SFOE) presents interactive guidelines for energy management in the area of facility management. These guidelines are based on the results of a project carried out by the International Energy Agency's Annex 40 'Operator competence'. The guidelines provide a step-by-step guide from initial analysis through to successful project completion and answer many questions that may crop up during the process. The focus is placed on energy aspects. Tools and 14 sample process descriptions are provided along with practical examples. Theoretical aspects are also presented and discussed, including models for operator roles and the processes involved. Also, change, risk and knowledge management are examined. Notes and information on possibilities for further education are presented.

  13. Guide biogas. From production to utilization. 5. compl. rev. ed.; Leitfaden Biogas. Von der Gewinnung zur Nutzung

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The book under consideration is a guide for biogas and consists of the following contributions: (a) Targets of the guide (M. Kaltschmitt); (b) Fundamentals of anaerobic fermentation (J. Friehe); (c) Systems engineering for supplying biogas (J. Postel); (d) Description of selected substrates (J. Friehe); (e) Operation of biogas plants (J. Liebetrau); (f) Gas processing and possibilities of utilization (M. Wetthaeuser); (g) Legal and administrative framework conditions (H. von Bredow); (g) Economy (S. Hartmann); (h) Company organisation (G. Reinhold); (i) Quality and utilization of fermentation residues (H. Doehler); (j) Implementation of a project (E. Fischer); (k) Position and significance of biogas as a renewable energy resource in Germany (M. Kaltschmitt); (l) Project examples (J. Friehe).

  14. Current situation regarding the co-combustion of waste materials in power plants; Aktuelle Situation der Mitverbrennung von Abfallstoffen in Kraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Schirmer, U.; Krueger, H.; Puch, K.H. [VGB Technische Vereinigung der Grosskraftwerksbetreiber e.V., Essen (Germany)

    1998-09-01

    In view of the wholly insufficient capacity, relative to current arisings, of waste incineration plants, residue processing plants and plants for the utilisation of other combustible materials we are inevitably faced with the question whether power plant furnaces might not be suited for the thermal treatment and utilisation of wastes and residues. This possibility has been studied by many VGB member companies and seriously investigated for its practicability in several cases. The investigations were premised on the following fundamental positions. The VGB members are prepared to contribute to the solution of the above problems as long as this is possible without detriment to their duties as energy suppliers. They can only assume this responsibility if the requirements of the licensing laws are observed. This concerns the quality and arising quantities of wastes to be taken in, emissions, and the disposal of combustion residues. Power plants typically make more or less complete use of their own process residues, a feature which as far as possible should not be impaired by the co-combustion process. The technical problems posed by the co-combustion of suitable residues and wastes are usually solvable. Co-combustion offers an alternative and a supplement to dedicated waste utilisation plants or plants for the utilisation of suitable residues. Beyond this some companies are interested in profiting from the fees that will be due to them for utilising wastes. From 1990 to 1992 a VGB working group studied the option of co-combustion on the basis of the above premises. The material elaborated by the group now in turn serves as a basis for the following deliberations. [Deutsch] Da die Kapazitaet der Abfallverbrennungsanlagen, der Anlagen zur Reststoffverwertung und der Anlagen zur Nutzung sonstiger brennbaren Stoffe fuer das vorhandene Angebot bei weitem nicht ausreicht, ergibt sich die Frage der Eignung von Kraftwerksfeuerungen zur thermischen Behandlung und Verwertung von

  15. The hand of birds revealed by early ostrich embryos

    Science.gov (United States)

    Feduccia, Alan; Nowicki, Julie

    2002-08-01

    The problem of resolving the homology of the digits of the avian hand has been framed as a conflict between paleontological and embryological evidence, the former thought to support a hand composed of digits I, II, III, because of similarity of the phalangeal formulae of the earliest known bird Archaeopteryx to that of Mesozoic pentadactyl archosaurs, while embryological evidence has traditionally favored a II, III, IV avian hand. We have identified the critical developmental period for the major features of the avian skeleton in a primitive bird, the ostrich. Analysis of digit anlagen in the avian hand has revealed those for digits/metacarpals I and V, thus confirming previous embryological studies that indirectly suggested that the avian hand comprises digits II, III, IV, and was primitively pentadactyl.

  16. Vermittlungstechnik

    Science.gov (United States)

    Plaßmann, Wilfried

    In einem vorhandenen Nachrichtennetz sorgt die Vermittlungstechnik dafür, dass Informationen zu jeder Zeit von einem beliebigen Zugangspunkt zu einem beliebigen anderen Zugangspunkt übertragen werden können. Der gesamte Vorgang wird mit Vermittlung bezeichnet. Das größte weltweit vorhandene Nachrichtennetz ist das kombinierte Internet-Telefonnetz. Die Zugangspunkte sind die Anschlusspunkte (ortsfeste Anschlussdosen) für die Endgeräte, wie z. B. Rechner, Telefonapparate, Faxgeräte oder Modems, oder aber ortsveränderliche Endgeräte wie Laptops, schnurlose Telefone oder Funktelefone ("Handys"). Die Vermittlungsstelle klassischer Art mit hierarchischem Aufbau ist nahezu vollständig durch komplexe rechnergesteuerte national arbeitende Anlagen ersetzt worden. In diesem Kapitel werden deshalb grundlegende Eigenschaften dargestellt. Stichworte: Grundbegriffe; Vermittlung; Verkehrstheorie; Endgeräte.

  17. Validation of the RALOC-mod.4 thermal-hydraulics code on evaporation transients in the Phebus containment

    International Nuclear Information System (INIS)

    Spitz, P.B.; Lemoine, F.; Tirini, S.

    1997-01-01

    IPSN (Nuclear Protection and Safety Institute) and GRS (Gesellschaft fur Anlagen und Reaktorsicherheit Schwertnergasse 1) are developing the ESCADRE-ASTEC systems of codes devoted to the prediction of the behaviour of water-cooled reactors during a severe accident. The RALOC-mod 4 code belongs to this system and is specifically devoted to containment thermal-hydraulics studies. IPSN has designed a Thermal Hydraulic Containment Test Program in support to the Phebus Fission Product Test Program/2/. Evaporation tests have been recently performed in the Phebus containment test facility. The objective of this work is to assess against these tests the capability of the RALOC -mod 4 code to capture the phenomena observed in these experiments and more particularly the evaporation heat transfer and wall heat transfers. (DM)

  18. Degradation behaviour and excess sludge production of mixed biocoenoses in membrane bioreactors; Abbauverhalten und Ueberschussschlammproduktion von Mischbiozoenosen in Membranbioreaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Kraume, M. [Technische Univ. Berlin (Germany). Inst. fuer Verfahrenstechnik; Szewzyk, U. [Technische Univ. Berlin (Germany). Fachgebiet Oekologie und Mikroorganismen

    1999-07-01

    In three different membrane bioreactors (technical scale and pilot scale), process engineering and microbiological studies were carried out over a period of up to three years. The sewage used was sugar-beet molasses slop and municipal sewage. All three plants exhibited stable COD degradation rates of 87 % (molasses slop) and 95 % (municipal sewage). They could be operated during the test period without regular removal of excess sludge. (orig.) [German] An drei unterschiedlichen Membranbioreaktoren (Technikums- und Pilotmassstab) wurden ueber einen Zeitraum von bis zu 3 Jahren verfahrenstechnische und mirkobiologische Untersuchungen durchgefuehrt. Als Abwasser wurde Zuckerrueben-Melasseschlempe und kommunales Abwasser eingesetzt. Alle drei Anlagen zeigten stabile CSB-Abbaugrade von 87% (Melasseschlempe) und 95% (kommunale Abwasser). Sie konnten ueber den Vesuchszeitraum ohne regelmaessigen Abzug von Ueberschussschlamm betrieben werden. (orig.)

  19. Differentiation of cartilaginous anlagen in entire embryonic mouse limbs cultured in a rotating bioreactor

    Science.gov (United States)

    Montufar-Solis, D.; Oakley, C. R.; Jefferson, Y.; Duke, P. J.

    2003-10-01

    Mechanisms involved in development of the embryonic limb have remained the same throughout eons of genetic and environmental evolution under Earth gravity (lg). During the spaceflight era it has been of interest to explore the ancient theory that form of the skeleton develops in response to gravity, and that changes in gravitational forces can change the developmental pattern of the limb. This has been shown in vivo and in vitro, allowing the hypergravity of centrifugation and microgravity of space to be used as tools to increase our knowledge of limb development. In recapitulations of spaceflight experiments, premetatarsals were cultured in suspension in a bioreactor, and found to be shorter and less differentiated than those cultured in standard culture dishes. This study only measured length of the metatarsals, and did not account for possible changes due to the skeletal elements having a more in vivo 3D shape while in suspension vs. flattened tissues compressed by their own weight. A culture system with an outcome closer to in vivo and that supports growth of younger limb buds than traditional systems will allow studies of early Hox gene expression, and contribute to the understanding of very early stages of development. The purpose of the current experiment was to determine if entire limb buds could be cultured in the bioreactor, and to compare the growth and differentiation with that of culturing in a culture dish system. Fore and hind limbs from E11-E13 ICR mouse embryos were cultured for six days, either in the bioreactor or in center-well organ culture dishes, fixed, and embedded for histology. E13 specimens grown in culture dishes were flat, while bioreactor culture specimens had a more in vivo-like 3D limb shape. Sections showed excellent cartilage differentiation in both culture systems, with more cell maturation, and hypertrophy in the specimens cultured in the bioreactor. Younger limb buds fused together during culture, so an additional set of El 1.5 limb buds was cultured with and without encapsulation in alginate prior to culturing in the bioreactor. Encapsulated limbs grown in the bioreactor did not fuse together, but developed only the more proximal elements while limbs grown in culture dishes formed proximal and distal elements. Alginate encapsulation may have reduced oxygenation to the progress zone of the developing limb bud resulting in lack of development of the more distal elements. These results show that the bioreactor supports growth and differentiation of skeletal elements in entire E13 limb buds, and that a method to culture younger limb buds without fusing together needs to be developed if any morphometric analysis is to be performed.

  20. LonWorks as Fieldbus for PV-Installations; LonWorks als Feldbus fuer PV-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Bergen, Ch. von

    2003-07-01

    The growing market for photovoltaics increasingly requires suitable quality controls covering plant operators, planners and installers, as well as the electric utilities. Additionally, the interest of the general public in the behaviour of photovoltaic (PV) plants is growing. This includes information from everyday practice. Alongside data retrieval, other themes such as the operative management of the unit and energy management become increasingly important for grid-connected PV systems. Todays measuring systems are not compatible with each other. Data communication between different PV plants with computer-aided analysis- and visualisation programmes is very complicated. LonWorks was introduced by Motorola and Toshiba in 1991. Today it leads the world market for field bus systems. With plug and play, components by several manufacturers can easily be incorporated into a LonWorks network. Today more than 3,500 companies use LonWorks technology. The goal of this project is to introduce the very popular LonWorks technology as a new standard for PV applications. The first objective was to develop a LonWorks interface for our Convert inverters and to connect them into a small network. In a second step we installed a LonWorks system at the 260 kW{sub p} PV plant 'Felsenau' in Berne, Switzerland. All 68 inverters are controlled over power line with LonWorks. The on-site PC acts as LonWorks DataServer and making remote information monitoring and data gathering possible. As soon as a functional error occurs, an alarm will be transmitted via modem to the SMSC (Short Message Service Centre). After two years of operation we can say that all expectations were fulfilled by our new system. Knowledge gained from this project has shown that LonWorks has lived up its considerable promise and can be regarded as a high-quality piece of technology. Integration into an overall system is technically very easy. To do this, however, relatively expensive software solutions have to be used as integration tools. This pressure on prices has the result that in the case of smaller applications (< 25 network nodes), this technology cannot compete with solutions that are already on the market. In addition, the expected penetration of a standardised field bus system into the PV sector has just not happened. Users appear to have resigned themselves to the disadvantages of the various proprietary communications solutions. This lack in demand makes the introduction of such a system even more difficult. (author)

  1. Annual energy balances of CHP-units supplying households; Jahresenergiebilanzen von KWK-Anlagen zur Hausenergieversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, B.; Muehlbacher, H. [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Energiewirtschaft und Anwendungstechnik

    2008-07-01

    A method to balance CHP-units for use in households on an annual basis has been developed. Seasonal as well as intraday fluctuations of the CHP-units are accounted for in the model. The results of this new method were validated in a test facility for certain days. Together with experimentally obtained data from a CHP-unit, the potential for technical improvements and a more favourable operational mode can be derived from the model. (orig.)

  2. Hydrogen filling stations. A guide for users and decision makers; Wasserstoff-Tankstellen. Ein Leitfaden fuer Anwender und Entscheider

    Energy Technology Data Exchange (ETDEWEB)

    Huss, Alexandra [AKOMBE Markt- und Technologiekommunikation, Koeln (Germany); Corneille, Marcel [EMCEL GmbH, Koeln (Germany)

    2011-12-15

    After an introduction into the field of hydrogen and fuel cell technology (H2FC) this brochure gives an outlook on our future mobility, which in the authors' view will involve hydrogen and fuel cells as integral components of electromobility systems. In its core sections this brochure provides in-depth information on hydrogen as an energy resource, the planning and design of hydrogen filling stations as well as economic aspects and funding opportunities. Rounding off the brochure are an overview of H2FC activities in Hesse, information on key players as well as further publications and technical data and a section dedicated to frequently asked questions on H2FC technology. [German] Nach einer allgemeinen Einfuehrung in das Themenfeld Wasserstoff- und Brennstoffzellen- (H2BZ1) Technologie, beleuchtet die Broschuere die Mobilitaet der Zukunft, in der Wasserstoff und Brennstoffzellen als feste Bestandteile einer zukuenftigen Elektromobilitaet gesehen werden. Vertiefende Informationen ueber den Energietraeger Wasserstoff, die Planung und den Aufbau von Wasserstoff-Tankstellen sowie wirtschaftliche Aspekte und Foerdermoeglichkeiten bilden den Kern der Broschuere. Einen Ueberblick ueber die H2BZ-Aktivitaeten in Hessen, Informationen zu relevanten Akteuren und weiterfuehrenden Publikationen sowie technische Daten und die haeufigsten Fragen im Zusammenhang mit der H2BZ-Technologie runden die Broschuere ab.

  3. A guideline for fire prevention during the storage of biomass; Leitfaden zur Brandvermeidung bei der Lagerung von Biomasse

    Energy Technology Data Exchange (ETDEWEB)

    Ferrero, Fabio; Malow, Marcus; Schmidt, Martin; Krause, Ulrich

    2009-10-14

    For five years, an increasing number of fires in timber-yards is observed. A multiplicity of these fires results from self inflammation of the material. Under this aspect, the contribution under consideration reports on the fundamentals of the self inflammation by biomass using wood as an example. The methodology for the avoidance of the self inflammation of biomass is based on a combination of laboratory tests and numeric simulation in order to determine the reliable waste dump geometry and storage times. In particular, the humidity content of the stored material is very important for growth and heat production of the micro organisms. If the material does not possess optimal humidity content, heat production and the probability of self inflammation are reduced. The optimal content of humidity amounts nearly 50-60 mass-%. For the determination of a safe storage of biomass, a flow chart is developed using pinewood as an example. (orig.)

  4. Tools for PSA reviews

    International Nuclear Information System (INIS)

    Linden, J. von

    1998-01-01

    It is desirable to have a uniform and competent procedure for the review of PSAs which are performed within the framework of the Periodic Safety Review of German Nuclear Power Plants. Guidelines for the review process should therefore be evaluated within task A. 1 of project SR 2096. The basis for this work is the experience and knowledge within GRS derived from PSA-related work and from several review projects as well as the German PSA Guide with its appendices. Furthermore, the review processes in the USA, Switzerland and Sweden and the Guidelines for the International Peer Review Service (IPERS Guidelines) were utilized. As a result, recommendations are given for the review process, with individual recommendations concerning the organization of the review, task allocation between the reviewers, interface problems, assessment criteria, the scope and depth of the review as well as the supporting documents. An additional result are checklists for the technical elements of the PSA, which are listed to facilicate the review work. It is not the intention of this report to work out complete review guidelines. Its aims is rather more to give recommondations and support for the review in addition to what can be derived from the existing documents that should be used for the review. The recommendations reflect the view of GRS and go beyond the statements given in the German PSA Guide (Leitfaden Probabilistische Sicherheitsanalyse /PSUe97/) in some points. (orig.) [de

  5. Noble metal recycling. Project 2: Optimization of discontinuous thermal processes (emission reduction). Final report; Edelmetallrecycling. Teilvorhaben 2: Weiterentwicklung der Verfahrenstechnik bei diskontinuierlichen thermischen Prozessen (Emissionsminderung). Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Baumbach, G.; Berger, R.

    2000-10-01

    A batch operated incineration process, used for the recycling of precious metals is described in the report. The development of a new combined pyrolysis/oxidation Process is the main focus of the work. This new process has several remarkable advantages compared to traditionally used techniques. The optimisation of the process with a modern fuzzy based control technique is described in detail. The emissions of the process were reduced considerably applying the new process and the innovative control technique. Furthermore the layout of several components of the new process can be reduced in the future. The developed techniques can also be applied in other thermal processes, especially batch processes. Additionally the application of catalysts for PCDD/PCDF reduction in the flue gas upstream and downstream of the filter was investigated. Whereas the catalyst performed well, as expected, downstream of the filter, no acceptable operation was possible upstream of the filter. As the reheating downstream the filter is economically not feasible the application of catalysts is not applicable for the describe process. (orig.) [German] Die Arbeit beschreibt einen diskontinuierlichen thermischen Prozess, der zur Rueckgewinnung von Edelmetallen eingesetzt wird. Der Schwerpunkt der Arbeit liegt auf der Entwicklung eines neuartigen kombinierten Pyrolyse/Oxidations-Prozesses, der gegenueber den traditionell eingesetzten Anlagen grosse Vorteile aufweist. Die Optimierung dieses Prozesses mit Hilfe modernster Fuzzy-Regelungstechnik wird detailliert beschrieben. Mit dem neuen Verfahren und den innovativen Regelungstechniken konnten die Emissionen des Prozesses merklich gesenkt werden, ohne den Energiebedarf negativ zu beeinflussen. Ausserdem koennen zukuenftige Anlagen kleiner ausgelegt werden. Die entwickelten Verfahren koennen auch auf andere thermische Prozesse uebertragen werden. Weiterhin wurde der Einsatz von Katalysatoren zur PCDD/PCDF-Minderung im Rein- und Rohgas untersucht

  6. Oil-free heat pump plants with R744 (CO{sub 2}); Oelfreie Waermepumpenanlagen mit R744 (CO{sub 2})

    Energy Technology Data Exchange (ETDEWEB)

    Hafner, Armin [SINTEF Energy Research, Trondheim (Norway)

    2011-07-01

    Refrigeration systems must have a certain oil level to ensure lubrication of mechanical components of the compressor. Some of the oil will escape from the compressor into the working fluid and thus into the cooling circuit (heat exchanger, tubes, header, etc.) The advantages of oil-free R744 refrigerators are assessed for different applications, e.g. industrial cooling (e.g. in supermarket), cooling during transport, cooling on board ships for production of cooled sea water, and in industrial heat pumps. The simpler design of oil-free systems will result in lower construction cost and also in a lower life cycle cost. The CREATIV project focussed on the development of an oil-free, hermetically sealed compressor. The compressor will be installed in the SINTEF-/NTNU laboratories at Trondheim in 2012 and will then be tested on site in several pilot projects. [German] In Kaelteanlagen muss eine bestimmte Menge an Oel vorhanden sein, um die Schmierung von mechanisch bewegten Teilen des Verdichters sicherzustellen. Dieses Oel wird hauptsaechlich im Verdichter bevorratet, jedoch gelangt ein nicht unwesentlicher Anteil mit dem Arbeitsmedium in den Kaeltemittelkreislauf. Somit befindet sich eine nicht vernachlaessigbare Menge an Schmiermittel in den Waermeuebertragern, Rohrleitungen, im Sammler etc. Die Vorteile von oelfreien R744-Kaelteanlagen im Vergleich zu konventionellen Kaelteanlagen werden fuer unterschiedliche Anwendungen bewertet: grosstechnische Kuehlung (z. B. Supermarktkuehlung), Transportkuehlung, an Bord von Schiffen bei der Produktion von gekuehltem Meerwasser (RSW) und von industriellen Waermepumpen. Aufgrund der viel einfacheren Bauweise von oelfreien Anlagen werden die Anlagenkosten meistens reduziert. Durch Reduzierung von Service- und Instandhaltungsarbeiten sowie einer verbesserten Systemleistung, die zu einem energieeffizienteren Betrieb fuehrt, sind die Gesamtkosten waehrend der Lebensdauer (Life Cycle Costs) einer oelfreien Anlage im Vergleich zu

  7. Decommissioning and dismantling: Qualification of the gamma scanning method as a certified method for radiological decontrolling measurement. Final report; Stillegung und Rueckbau: Qualifizierung des Gamma-Scanning zur Freimessung. Genehmigungspraxis. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kirchhoff, J.; Stasch, W.P.

    1998-10-01

    Prior to release from the radiological supervision and control regime of the AtG (German Atomic Energy Act), nuclear facilities have to be scanned using licensed radioactivity measuring methods for providing evidence that the remaining radioactive contamination is below the legally defined limits and excludes hazards to the population, material goods, or the environment. The manually performed {alpha}/{beta} measuring methods applied so far for radiological decontrolling measurement are surface scanning methods measuring the contamination of very thin surface layers of the structures, while radioactivity in deeper layers is not necessarily detected. The gamma scanning method presented in this document is capable of scanning the structures and materials of nuclear facilities from the surface down to much deeper layers in just one measuring run. The automated scanning process at the same time offers the advantage of preventing the uncertainties possibly contributed through human factors. (orig./CB) [Deutsch] Vor der Entlassung von kerntechnischen Anlagen aus dem Geltungsbereich des AtG ist sicherzustellen, dass von der Anlage nach Freigabe aus der atomrechtlichen Ueberwachung keine Gefahren fuer Personen, Sachgueter und die Umwelt ausgehen koennen. Hierzu sind die Anlagen freizumessen, d.h. es ist durch qualifizierte Messverfahren sicherzustellen, dass festgelegte radiologische Grenzwerte unterschritten werden. Die bisherigen auf {alpha}/{beta}-Messung beruhenden Freimessverfahren (Kontaminationsmonitore) erfassen nur die Radioaktivitaet in duennsten Oberflaechenschichten. Radioaktivitaet in darunter liegenden Schichten wird nicht zwangslaeufig erfasst. Zudem erfolgen diese Messungen ausschliesslich manuell. Das Gamma-Scanning-Freimessverfahren erfasst neben der Oberflaechenschicht gleichzeitig auch tiefere Schichten. Der Nachweis der Grenzwertunterschreitung kann somit in nur einem Arbeitsgang erbracht werden. Durch automatisiertes Scannen koennte darueber hinaus

  8. Projecting and construction in hydrological engineering. Comparison of goals and results. Papers read at the symposium of 15 - 17 Oct 1998; Planung und Realisierung im Wasserbau. Vergleich von Zielvorstellungen mit den Ergebnissen. Beitraege zum Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Strobl, T. [ed.; Zunic, F. [comp.

    1998-07-01

    Today's hydrological engineers must take account of boundary conditions that were considered unimportant even a few years ago, e.g. ecological and social acceptability as well as political goals. The symposium presents examples of goals and reality, discusses the shortcomings of reality, and states the reasons. [German] Der Wasserbauingenieur muss heute bei der Planung und Realisierung wasserwirtschaftlicher Projekte und wasserbaulicher Anlagen viele Randbedingungen beruecksichtigen, die noch vor Jahren nicht oder nicht im derzeitigen Umfang massgebend waren. So ist beispielsweise die Beruecksichtigung gesamtoekologischer Belange bei groesseren Vorhaben zur selbstverstaendlichen Vorgabe einer jeden Planung geworden. Aber auch gesellschaftlich konsensfaehige Loesungen und die Beachtung politischer Wuensche stellen den Wasserbauingenieur vor grosse planerische Herausforderungen. Ein Ziel des Symposiums ist es, an konkreten Beispielen Planung und Wirklichkeit vorzustellen, eventuelle Abweichungen zu diskutieren und Ursachen hierfuer herauszuarbeiten. (orig.)

  9. VESPA. Behaviour of long-lived fission and activation products in the nearfield of a nuclear waste repository and the possibilities of their retention

    Energy Technology Data Exchange (ETDEWEB)

    Bischofer, Barbara; Hagemann, Sven [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Koeln (Germany); Altmaier, Marcus [Karlsruher Institut fuer Technologie (KIT) (Germany); and others

    2016-06-15

    The present document is the final report of the Joint Research Project VESPA (Behaviour of Long-lived Fission and Activation Products in the Near Field of a Nuclear Waste Repository and the Possibilities of Their Retention), started in July 2010 with a duration of four years. The following four institutions were collaborative Partners in VESPA: - Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH - Institut fuer Energie- und Klimaforschung, IEK-6: Nukleare Entsorgung und Reaktorsicherheit, Forschungszentrum Juelich (FZJ) - Institut fuer Ressourcenoekologie (IRE), Helmholtz-Zentrum Dresden-Rossendorf (HZDR) - Institut fuer Nukleare Entsorgung (INE), Karlsruher Institut fuer Technologie (KIT) VESPA was funded by the German Federal Ministry of Economics and Energy (BMWi) under the contract numbers 02 E 10770 (GRS), 02 E 10780 (FZJ-IEF-6), 02 E 10790 (HZDR-IRE), 02 E 10800 (KIT-INE).

  10. Air-cooled recirculation cooling systems. Technical and economic comparison; Luftgekuehlte Rueckkuehlsysteme. Technisch wirtschaftlicher Vergleich

    Energy Technology Data Exchange (ETDEWEB)

    Dierks, G. [Fa. Jaeggi/Guentner (Schweiz) AG, Trimbach (Switzerland)

    2000-03-01

    There are several air-cooled forced-circulation cooling systems for heat removal from refrigeration systems. Optimum solutions should not be selected on the basis of the cost factor alone; an integrative approach should be used instead. An exemplary investigation is presented. [German] Fuer die Waermeabfuhr aus kaeltetechnischen Anlagen stehen verschiedene luftgekuehlte, zwangsbelueftete Rueckkuehlsysteme zur Verfuegung. Die Auswahl des Systems ist oft von kurzfristigem Kostendenken gepraegt, was in technischer und wirtschaftlicher Hinsicht aber nicht immer der optimalen Loesung entspricht. Erst die genauere Kenntnis der verschiedenen Systeme und eine ganzheitliche Betrachtungsweise ermoeglichen die optimale Wahl fuer den einzelnen Fall. Die hier praesentierte Untersuchung wird anhand eines konkreten Falls dargestellt, wobei Preise und technische Produktdaten auf realen Anfragen beruhen. Der Autor ist um objetive Bewertung bemueht, der Leser moege aber selbst urteilen. (orig./AKF)

  11. ATHLET calculations of the pressurizer surge line break (PH-SLB test) at the PMK-2 test facility

    International Nuclear Information System (INIS)

    Krepper, E.; Schaefer, F.

    2000-01-01

    At the Hungarian integral test facility PMK-2 a pressurizer surge line break experiment (PH-SLB test) was carried out with the PHARE 4.2.6b project. The primary objective of the test was to provide experimental data for a surge line break transient at VVER-440 reactors with reduced injection from the emergency core cooling systems (ECC). At the Institute of Safety Research calculations of the experiment were performed with the thermohydraulic computer code ATHLET, which was developed by GRS (Gesellschaft fuer Anlagen- und Reaktorsicherheit) mbH. In the context of the PHARE 4.2.6b project the Institute of Safety Research has also supplied the void fraction measurement system for the PMK-2 test facility and was involved in the evaluation of the experimental results. (orig.)

  12. A simple free-piston Sterling engine for combined heat and power generation (CHP) in the residential sector; Einfacher Stirling-Freikolben-Motor fuer die Kraft-Waerme-Kopplung (KWK) im Wohnbereich

    Energy Technology Data Exchange (ETDEWEB)

    Budliger, J.P.

    2001-07-01

    A completely static resonance tube is used in the Stirling cycle, as a substitute for a displacer piston. The Sterling system described works with only one, elastically suspended piston. The simple, cost-effective and maintenance-free basic design concept is explained in full detail, as well as some possible design types of resonance tube-charged, one-piston Stirling systems and their major advantages and performance characterisitcs. (orig./CB) [German] Anstelle eines Schwingkolbens kann auch ein voellig statisches Resonanzrohr eingesetzt werden: das resultierende Stirling-System umfasst nur noch einen einzigen, elastisch aufgehaengten Kolben. Dieses einfache, kostenguenstige und unterhaltsfreie Konzept stellt eine erwartungsvolle Loesung fuer dezentrale KWK-Anlagen dar. Im Vortrag werden einige moegliche Auslegungen solcher, mit Resonanzrohren aufgeladenen 1-Kolben-Stirling-Aggregate diskutiert, ihre wesentlichsten Eigenschaften und Leistungscharakteristiken beschrieben. (orig./CB)

  13. Promising energy converters for the next century. Fuel cells for cogeneration systems; Aussichtsreicher Energiewandler fuers naechste Jahrhundert. Brennstoffzelle fuer Kraft-Waerme-Kopplung

    Energy Technology Data Exchange (ETDEWEB)

    Hilscher, G

    1996-02-16

    First there is a report on experience with phosphoric acid fuel cell plants (PAFC), which the operators used in a 200 kW plant of Onsi (HEAG, Ruhrgas AG, Thyssengas AG) and a 79 kW plant of Kinetics Technology (Solar-Wasserstoff Bayern GmbH). After this, the present state of development of oxide ceramic high temperature fuel cells (SOFC) and polymer electrolyte diaphragm fuel cells (PEMFC) is briefly described. (MM) [Deutsch] Zuerst wird ueber Erfahrungen mit Phosphorsaeure-Brennstoffzellen-Anlagen (PAFC) berichtet, die die Betreiber einer 200 kW-Anlage von Onsi (HEAG, Ruhrgas AG, Thyssengas AG) und einer 79 kW-Anlage von Kinetics Technology (Solar-Wasserstoff-Bayern GmbH) hatten. Danach wird kurz der derzeitige Stand der Entwicklung bei den oxidkeramischen Hochtemperaturbrennstoffzellen (SOFC) und Polymer-Elektrolyt-Membran-Brennstoffzellen (PEMFC) wiedergegeben. (MM)

  14. Music hall Markneukirchen; Musikhalle in Markneukirchen

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1996-01-01

    The article presents the new building of the music hall Markneukirchen. From the planned use of the building result very high demands on the ventilation system in order to keep to a sound power level of less than 30 dB(A) in the hall. The building services are dealt with using numerous flowsheets and diagrams: Heat supply, ventilation system, sanitary system, building management, instrumentation and control, electric and lighting systems. (BWI) [Deutsch] Der vorliegende Beitrag stellt den Neubau der Musikhalle Markneukirchen vor. Durch das Nutzungskonzept ergeben sich fuer die Einhaltung eines Schalleistungspegels von weniger als 30 dB(A) im Saalbereich an die Lueftungsanlage sehr hohe Ansprueche. Es werden die raumlufttechnischen Anlagen anhand zahlreicher Flussbilder und Abbildungen vorgestellt: Waermeversorgung, Lueftungstechnik, Sanitaertechnik, Gebaeudeleit- und MSR-Technik, Elektro- und Lichttechnik. (BWI)

  15. The Neustadt-Glewe geothermal project - problems and experience during operation; Das Geothermieprojekt Neustadt-Glewe - Probleme und Erfahrungen mit einer laufenden Anlage

    Energy Technology Data Exchange (ETDEWEB)

    Menzel, H [Erdwaerme Neustadt-Glewe GmbH (Germany)

    1997-12-01

    The scope and goals of the project and the principle of the Neustadt-Glewe geothermal system are presented. The system was commissioned in February 1995, so that sufficient performance data and availability information are now available. Problems that occurred are described and analyzed. Preliminary analyses of the consumption-dependent cost and cost distribution provide a basis for statements on the economic efficiency of geothermal projects. (orig.) [Deutsch] Es werden Inhalt und Ziel des Projektes, sowie das Prinzip der Geothermienutzung in Neustadt-Glewe kurz dargestellt. Nachdem die Anlage im Februar 1995 in Betrieb ging, koennen erste Betriebsergebnisse und Zuverlaessigkeitsaussagen gegeben werden. Es werden Probleme beim Betrieb der Anlagen geschildert und analysiert. Erste Analysen fuer die verbrauchsabhaengigen Kosten und die Kostenverteilung bilden die Grundlage fuer Aussagen zur Wirtschaftlichkeit derartiger Projekte. (orig.)

  16. Comparison of CASMO and NESSEL few group cross section libraries and their usage in DYN3D

    International Nuclear Information System (INIS)

    Kuchin, A.; Ovdiyenko, Y.; Loetsch, T.

    2007-01-01

    This work presents comparative analysis of two group diffusion cross sections libraries which were generated by NESSEL-4 and CASMO-4 lattice codes. Diffusion parameters were calculated for WWER-1000 fuel assemblies with stainless steel spacing grids and guiding tubes. These cross section sets were introduced into reactor core code DYN3D and tested on the base of real reactor core states. In this case operation data of the first three fuel cycles of sixth unit of Zaporizhzhya NPP were used. The work was performed in the framework of the order BMU SR 2511 - 862 500/09, UA-2575. The report describes the opinion and view of the contractor - TUV ENERGIE CONSULT - and does not necessarily represent the opinion of the ordering party - Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (Authors)

  17. Powerful near-surface geothermal energy with vertical groundwater circulation; Leistungsfaehige oberflaechennahe Geothermie mit vertikaler Grundwasserzirkulation

    Energy Technology Data Exchange (ETDEWEB)

    Viernickel, Michael [Geo-En Energy Technologies GmbH, Berlin (Germany). Bereich Produktentwicklung und Projektierung komplexer Energiesysteme unter Einsatz von Geothermie

    2013-03-15

    The conversion of energy supply based on renewable energies will be electricity based and the efficient provision of heating and cooling can be done by electric heat pumps. In cities, however, where the open areas for geothermal systems are scarce, groundwater-based systems can be a powerful option. The development of a large heat reservoir via a single bore is possible with vertical groundwater circulation systems and is described here. [German] Der Umbau der Energieversorgung auf erneuerbare Energien wird Strom basiert sein und eine effiziente Bereitstellung von Waerme und Kaelte kann durch elektrische Waermepumpen erfolgen. Innerstaedtisch sind die Freiflaechen fuer Geothermieanlagen allerdings knapp, so dass Grundwasser basierte Anlagen eine leistungsfaehige Option darstellen koennen. Die Erschliessung eines grossen Waerme-Reservoirs ueber nur eine Bohrung ist mit vertikalen Grundwasserzirkulationsanlagen moeglich und wird hier beschrieben.

  18. Measuring the energy consumption of single-phase UPS-devices; Energiemessungen von 1-phasigen USV-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Bush, E. [Bush Energie GmbH, Felsberg (Switzerland); Schalcher, M.; Bruggmann, T.; Kuehne, P.; Kammermann, S. [Hochschule fuer Technik und Wirtschaft Chur, Chur (Switzerland)

    2007-11-15

    In the present measuring project, 46 single-phase uninterruptible power supplies (UPS-devices) in the power range from 350 VA up to 3000 VA could be measured with regard to efficiency and energy consumption, at Testlabor S.A.L.T., Chur, Switzerland. The classification into VFD-, VI- and VFI-devices as well as the carrying out of the measuring was accomplished in compliance with IEC 62040-3 with resistive and nonlinear load. As expected, the VFD-devices showed the best efficiency level, followed by VI- and VFI-devices. The efficiency rate at 50%, 75% and 100% of the nominal power differs only slightly and in most cases exceeds 90%. However, at a load of 25% the efficiency decreases considerably (in individual cases to below 80%). There are large differences in the area of standby losses (switched on, without load) which can only partly be explained by the different technologies of the various types of UPS-devices. Compared to the Code of Conduct for UPS-devices with a power of more than 10 kVA, the devices with lower power compare relatively well, especially because of the small power demands for cooling. (author)

  19. Electrotechnical installations. Transformer stations. Construction; transformer rooms. Elektrotechnische Anlagen. Transformatorenstationen. Bauliche Ausfuehrung; Raeume fuer Transformatoren

    Energy Technology Data Exchange (ETDEWEB)

    1976-05-01

    The data sheet to standardize the construction of transformer rooms for stationary transformers and takes into account the replacement of transformers by units made by different manufacturers. It contains information about the position, dimensions, load assumptions, construction of ceilings, walls and floors, cable routes, electric installations for lighting and ventilation systems, windows and doors, venting, paint and surface protection coatings, arrangement and design of oil catch pans, and calculation of the venting cross sections. Pertinent VDE rules are listed.

  20. Refrigeration plants for the assembly hall VW Mechatronics; Kaeltetechnische Anlagen fuer die Fertigungshalle VW Mechatronic

    Energy Technology Data Exchange (ETDEWEB)

    Stroeder, R. [BKI Brab und Kahl Ingenieurgesellschaft mbH, Aachen (Germany)

    2005-07-01

    The partial air-conditioning plants of the 16,500 m-2 assembly hall Volkswagen Mechatronic in Stollberg near Chemnitz was described in the September and October 2005 edition of the magazine ''TAB Technik am Bau''. Refrigeration energy at various temperature levels is necessary to supply these plants and for process cooling. The resulting refrigeration plants are described in the following contribution. (orig.)

  1. Self-advertising: PV systems on solar factories; Werbung in eigener Sache. PV-Anlagen an Solarfabriken

    Energy Technology Data Exchange (ETDEWEB)

    Trojek, S.

    2007-10-02

    The contribution investigates if producers of solar systems are also users of solar systems; it looks into the systems installed by German and Japanese companies on their own buildings, into the uses made of the electric power generated, and the experience gained with their own systems. (orig.)

  2. Bioenergy guide. Projecting, operation and economic efficiency of biomass power plants; Leitfaden Bioenergie. Planung, Betrieb und Wirtschaftlichkeit von Bioenergieanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Deimling, S. [Stuttgart Univ. (DE). Inst. fuer Energiewirtschaft und Rationelle Energieanwendung (IER); Kaltschmitt, M; Schneider, B. [and others

    2000-07-01

    This guide gives an survey over planning, operation and economics of biomass conversion plants. Main topics are: production and supply of biomass fuels, combustion properties, licensing, cost and financing. It shows planning and management of projects and the legal background for Germany and the European Union.

  3. Energetic use of renewable fuels, especially in Bavaria; Energetische Nutzung von nachwachsenden Rohstoffen, speziell Holz, in Bayern

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, A; Lamp, P; Funk, R [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Abt. Energieumwandlung und -speicherung, Garching (Germany)

    1997-12-31

    Most of Bavaria`s biomass-fuelled furnaces with capacities of more than 1 MW are heating stations with a thermal capacity of 0.6 to 0.9. The few heat-and-power stations among them use the conventional steam cycle and have electric capacities of 0.15 to 0.2. Most furnaces are grate furnaces and underfeed stoker furnaces. Dust and CO emissions are well below the specified limiting values. (orig) [Deutsch] Die Mehrzahl der in Bayern installierten Anlagen mit Biomassefeuerung im Kapazitaetsbereich oberhalb 1 MW arbeiten als Heizwerke mit einem thermischen Wirkungsgrad von 0,6 bis 0,9. Die wenigen Heizkraftwerke nutzen den konventionellen Dampfkreislauf und erreichen damit elektrische Wirkungsgrade von 0.15 bis 0.2. Die ueberwiegend eingesetzten Feuerungstechniken sind die Rost- und die Unterschubfeuerungen. Bezueglich der Staub- und CO-Emissionen koennen die Grenzwerte heute problemlos eingehalten werden. (orig)

  4. Energetic use of renewable fuels, especially in Bavaria; Energetische Nutzung von nachwachsenden Rohstoffen, speziell Holz, in Bayern

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, A.; Lamp, P.; Funk, R. [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Abt. Energieumwandlung und -speicherung, Garching (Germany)

    1996-12-31

    Most of Bavaria`s biomass-fuelled furnaces with capacities of more than 1 MW are heating stations with a thermal capacity of 0.6 to 0.9. The few heat-and-power stations among them use the conventional steam cycle and have electric capacities of 0.15 to 0.2. Most furnaces are grate furnaces and underfeed stoker furnaces. Dust and CO emissions are well below the specified limiting values. (orig) [Deutsch] Die Mehrzahl der in Bayern installierten Anlagen mit Biomassefeuerung im Kapazitaetsbereich oberhalb 1 MW arbeiten als Heizwerke mit einem thermischen Wirkungsgrad von 0,6 bis 0,9. Die wenigen Heizkraftwerke nutzen den konventionellen Dampfkreislauf und erreichen damit elektrische Wirkungsgrade von 0.15 bis 0.2. Die ueberwiegend eingesetzten Feuerungstechniken sind die Rost- und die Unterschubfeuerungen. Bezueglich der Staub- und CO-Emissionen koennen die Grenzwerte heute problemlos eingehalten werden. (orig)

  5. Bus systems: Integrated facility management; Bus-Systeme: Gewerkeuebergreifende Gebaeudeautomation

    Energy Technology Data Exchange (ETDEWEB)

    Baumgarth, S.; Heiser, M. [Fachhochschule Braunschweig-Wolfenbuettel, Wolfenbuettel (Germany)

    2000-03-01

    Optimisation of facility management relies indispensably on uncomplicated interactive communication between different systems by different producers. An example is described: The system comprises two closed-cycle cooling towers, a cold water set and two different loads (ventilators). Each system can be controlled separately. The trend in automation is in the direction of intelligence even at field level. [German] Unverzichtbare Voraussetzung fuer das Ausschoepfen von Optimierungspotentialen in der Gebaeudeautomation ist die unkomplizierte, wechselseitige Kommunikation zwischen Anlagen und Automatisierungsstationen verschiedener Gewerke und Hersteller. Am Beispiel einer komplexen Anlage, die aus zwei Kuehltuermen mit geschlossenem Kreislauf, einem Kaltwasserersatz sowie unterschiedlichen Verbrauchern (Lueftungsanlagen) besteht, soll die Verknuepfung kaeltetechnischer Gewerke naeher dargestellt werden. Jeder der Teilbereiche ist ueber eine umfangreiche Strategie zu regeln und zu steuern. Dabei geht die Entwicklung in der Gebaeudeautomation hin zu einer Verlagerung der Intelligenz in die Feldebene. (orig./AKF)

  6. Franco-German cooperation for the physical protection of the EPR reactor

    International Nuclear Information System (INIS)

    Jalouneix, J.; Hagemann, A.

    2001-01-01

    This article presents the proceeding that has been followed in the EPR (European pressurized water reactor) project concerning physical protection against malevolent actions and robbery of nuclear materials. Before the different options of the nuclear island were definitely set, a task group had been constituted to examine if these options could hamper the setting of physical protection measures that are required by the legislation of the 2 countries. Another group composed of experts from IPSN/GRS (Institut de Protection et de Surete Nucleaire / Gesellschaft fur Anlagen und Reaktorsicherheit) had the task to define common requirements concerning the physical protection of reactors in Germany and in France. In this framework the EPR project team has prepared a technical document reviewing the different dispositions that have been retained to assure the physical protection of the reactor. (A.C.)

  7. Burnout model of a grate-firing waste incinerator for complete simulation of the combustion space; Abbrandmodell einer Muellrostfeuerung fuer eine vollstaendige Feuerraumsimulation

    Energy Technology Data Exchange (ETDEWEB)

    Kruell, F; Kremer, H; Wirtz, S [Bochum Univ. (Germany). Lehrstuhl Energieanlagentechnik

    1998-09-01

    In the past few decades, grate firing has become an established technology for incineration of residual waste and other materials of the domestic waste type. Process control is difficult because of the heterogeneous nature of the waste which is also subject to seasonal and regional variations. In addition, the waste composition may change significantly as a result of recycling as required by new laws. (orig.) [Deutsch] In den letzten Jahrzehnten hat sich die Rostfeuerung fuer die thermische Entsorgung von Restmuell und hausmuellaehnlichem Gewerbemuell bewaehrt. Die Prozessfuehrung bzw. die Feuerfuehrung solcher Anlagen wird insbesondere durch die starke Heterogenitaet des Muells erschwert, der zusaetzlich jahreszeitlichen und regionalen Schwankungen unterliegt. Zudem kann es in der Zusammensetzung der einzelnen Abfallarten durch die Entnahme von Wertstoffen infolge der Umsetzung von gesetzlichen Vorschriften und Gesetzen - wie Abfallgesetz und Kreislaufwirtschaftsgesetz - zu signifikanten Verschiebungen kommen. (orig.)

  8. The scientific publications of the Karlsruhe Nuclear Research Centre in the year 1974

    International Nuclear Information System (INIS)

    1975-04-01

    Report KFK 2125 contains all the titles of those publications which were printed in 1974. Lectures are included then when the written version is available in the Central Library. Concerning patents, only those specified in a certain way (Ersterteilung, Auslegeschrift, Offenlegungsschrift) are listed. The list of publications is arranged according to institutes. Under the heading 'Projekt' there are only project reports and publications of project staff members. The list also includes those publications printed in the Kernforschungszentrum concerned with the research and development projects' Prozesslenkung mit DV-Anlagen (PDV)' und 'Rechnerunterstuetztes Entwickeln und Konstruieren (CAD)' which are carried out by the Gesellschaft fuer Kernforschung in cooperation with other firms and organizations. In addition, the publications of the Institut fuer Strahlentechnologie der Bundesforschungsanstalt fuer Lebensmittelfrischhaltung, situated on the premises of the Kernforschungszentrum, are given. (orig./HK) [de

  9. Proof of pipeline strength based on measurements of inspection pigs; Festigkeitsnachweis von Pipelines aufgrund der Messergebnisse von Pruefmolchen

    Energy Technology Data Exchange (ETDEWEB)

    De la Camp, H.J.; Feser, G.; Hofmann, A.; Wolf, B.; Schmidt, H. [TUeV Sueddeutschland Bau und Betrieb GmbH, Muenchen (Germany); Herforth, H.E.; Juengling, K.H.; Schmidt, W. [TUeV Anlagentechnik GmbH, Berlin-Schoeneberg (Germany). Unternehmensgruppe TUeV Rheinland/Berlin-Brandenburg

    2002-01-01

    The report is aimed at collecting and documenting the state of the art and the extensive know how of experts and pipeline operators with regard to judging the structural integrity of pipelines. In order to assess the actual mechanical strength of pipelines based on measurement results obtained by inspection pigs, guidance is given for future processing, which eventually can be used as a basis for an industry standard. A literature study of the commercially available types of inspection pigs describes and synoptically lists the respective pros and cons. In essence the report comprises besides check lists of operating data for the pipeline and the pig runs mainly the evaluation of defects and respective calculating procedures. Included are recommendations regarding maintenance planning, verification of defects as well as repetition of pig runs. (orig.) [German] Ziel des Berichtes ist die Erfassung und Dokumentation zum derzeitigen Stand der Technik und des vorhandenen umfangreichen Know-how von Sachverstaendigen und Pipelinebetreibern auf dem Gebiet der sicherheitstechnischen Beurteilung von Pipelines. Fuer den Festigkeitsnachweis von Pipelines aufgrund der Messergebnisse von Pruefmolchen wurde ein Leitfaden als Basis fuer die zukuenftige Vorgehensweise erstellt, der eventuell die Grundlage eines normativen Regelwerkes bilden kann. In einer Literaturstudie wurden die auf dem Markt befindlichen Pruefmolchtypen zusammenfassend beschrieben und ihre Vor- und Nachteile tabellarisch gegenuebergestellt und bewertet. Neben der Erstellung von Checklisten fuer notwendige Daten zum Betrieb der Pipeline und der Molchlaeufe bildet die Fehlerbewertung mit entsprechenden Berechnungsverfahren den Hauptteil dieses Berichtes. Hinweise zur Instandhaltungsplanung (Fehlerverifikation und Molchlaufwiederholung) werden gegeben. (orig.)

  10. Nanostructured films of inorganic-organic hybrid materials for application in photovoltaics; Nanostrukturierte Filme aus anorganisch-organischen Hybridmaterialien fuer die Photovoltaik

    Energy Technology Data Exchange (ETDEWEB)

    Perlich, Jan

    2009-06-25

    hierarchischen Morphologien in unterschiedlichen Konfigurationen. Die strukturelle Untersuchung der einzelnen nanostrukturierten TiO{sub 2}-Filme bis hin zum funktionalen Multischichtaufbau als photovoltaische Demonstrationszelle wurde mit konventionell abbildenden Methoden, wie beispielsweise Rasterkraftmikroskopie und Elektronenmikroskopie, als auch der speziellen Kleinwinkel-Roentgenstreumethode unter streifendem Einfallswinkel (GISAXS) durchgefuehrt. (orig.)

  11. Cryogenic infrastructure at BESSY II. Inventory and outlook; Kryogene Infrastruktur bei BESSY II. Bestand und Ausblick

    Energy Technology Data Exchange (ETDEWEB)

    Heling, Svenja; Anders, Wolfgang; Heinrich, Jochen; Hellwig, Axel; Janke, Karsten; Molder, Benjamin; Rotterdam, Stefan [Helmholtz-Zentrum Berlin fuer Materialien und Energie GmbH, Berlin (Germany)

    2017-07-01

    The Helmholtz Centre Berlin operates the BESSY II electron storage ring at the Adlershof site. A helium condenser is installed to supply the superconducting wavelength shifter installed in the storage ring with liquid helium. Another liquefier, including a comprehensive cryogenic infrastructure, supplies helium at 1.8 K to several test stands, especially for superconducting cavity resonators. In addition to the operation of the existing plants, a new type of accelerator is currently being set up as part of the bERLinPro project. In order to ensure the required supply of liquid helium, one of the existing helium condensers will be relocated and the plant will be extended by a 10,000 l dewar, three valve boxes, a cold compressor box, a warm pumping station and an 80 K helium system. In addition, the future project BESSY VSR, a further development of the BESSY II storage ring, will see the procurement of a third refrigeration system. A challenge here will be the year-round continuous operation. This paper explains the structure of the plants described above in more detail and provides an insight into the challenges of plant design. Finally, the planned future expansions will be outlined. [German] Das Helmholtz-Zentrum Berlin betreibt am Standort Adlershof u.a. den Elektronenspeicherring BESSY II. Fuer die Versorgung der im Speicherring installierten supraleitenden Wellenlaengenschieber mit Fluessighelium ist ein Heliumverfluessiger installiert. Ein weiterer Verfluessiger, inklusive umfassender kryogener Infrastruktur, versorgt mehrere Teststaende, vor allem fuer supraleitende Hohlraumresonatoren, mit Helium bei 1,8 K. Neben dem Betrieb der existierenden Anlagen wird derzeit ein neuartiger Beschleunigertyp im Rahmen des Pro-jektes bERLinPro aufgebaut. Um die benoetigte Versorgung mit Fluessighelium zu gewaehrleisten, wird einer der bestehenden Heliumverfluessiger umgezogen sowie die Anlage um u.a. einen 10.000 l Dewar, drei Ventilboxen, eine Kaltkompressorbox, einen

  12. Integration of refrigerators into facility automation with the aid of bus systems; Integration der Kaeltetechnik in die Gebaeudeautomation mit Bus-Systemen

    Energy Technology Data Exchange (ETDEWEB)

    Baumgarth, S.; Heiser, M. [Fachhochschule Braunschweig-Wolfenbuettel, Wolfenbuettel (DE). Inst. fuer Verbrennungstechnik und Prozessautomation (IVP)

    2000-07-01

    The integration of refrigeration systems in building automation is illustrated by the example of a ventilation system and a cooling ceiling. Cold is supplied by a coldwater unit. This necessitates supply of consumption data to the central refrigeration system. So far, technical facilities are commonly controlled by DDC systems and in-house bus systems. The demand for open communication between different systems resulted in the development of neutral systems like FND and Profibus, which were followed by a multitude of other, less generally accepted systems. In the field of electrical installations, the European Installation Bus EIB was generally accepted as a certified, open bus system which can be combined with DDC technology and integrated in in-house control systems. Another technology developed in the USA is the Local Operating Network, LON, whic has a hither transmission rate and higher information content for the various bus members. The contribution compares the two bus systems. [German] Die Einbindung der Kaeltetechnik in die Gebaeudeautomation wird an den Beispielen Lueftungsanlage und Kuehldecke vorgestellt. Die erforderliche Kaelte soll durch einen Kaltwasserersatz energieoptimiert bereitgestellt werden. Dazu muessen Informationen aus dem Verbraucherbereich in der Kaeltezentrale zur Verfuegung stehen. RTL-Anlagen wurden bisher mittels DDC-Technik und firmenspezifischen Bus-Systemen geregelt und gesteuert. Wenn verschiedene Anlagen durch DDC-Systeme unterschiedlicher Hersteller betrieben wurden, so war anfaenglich eine gemeinsame Ueberwachung auf einer zentralen Leitwarte nur ueber Gateways moeglich. Aus der Forderung nach offener Kommunikation unterschiedlicher Systeme entstanden die ersten firmenneutralen Entwicklungen FND und Profibus. Es folgten eine Vielzahl weiterer Netz- und Busdefinitionen und deren Kommunikationsprotokolle, denen jedoch weitgehend eine allgemeine Anerkennung versagt blieb. Im Bereich der Elektroinstallation profilierte sich der

  13. Groundwater monitoring programme. A guide for groundwater sampling and analysis. 2. ed.; Grundwasserueberwachungsprogramm. Leitfaden fuer Probenahme und Analytik von Grundwasser

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Quality assurance guidelines have been developed and introduced in Baden-Wuerttemberg for groundwater monitoring. The contribution contains the fundamentals and technical guides for sampling and measurement of the Baden-Wuerttemberg groundwater monitoring programme, as well as parameter groups and a preliminary assessment of the methods. [German] Bei der Gewinnung von Umweltdaten sind hohe Anforderungen an die Qualitaet der erhobenen Daten zu stellen. Dies trifft in besonderem Masse gerade auch fuer Grundwasseruntersuchungen zu, da hier haeufig Konzentrationen im Bereich der Nachweisgrenze auftreten. Fuer das Grundwassermessnetz Baden-Wuerttemberg sind qualitaetssichernde Regelungen entwickelt und eingefuehrt worden. In der vorliegenden Zusammenstellung sind die Grundsatzpapiere, bzw. Technischen Anleitungen aus dem Grundwasserueberwachungsprogramm Baden-Wuerttemberg fuer die Grundwasserprobennahme sowie zu Messverfahren, Parametergruppen und zur ersten Beurteilung der Messergebnisse enthalten. (orig.)

  14. Possible emissions from electricity generation from geothermal energy; Moegliche Emissionen bei der Stromerzeugung aus Geothermie

    Energy Technology Data Exchange (ETDEWEB)

    Heberle, Florian; Bruggemann, Dieter [Bayreuth Univ. (Germany). Lehrstuhl fuer Technische Thermodynamik und Transportprozesse (LTTT)

    2013-03-15

    Electricity from geothermal energy in the low temperature range can be efficiently recovered if power plant processes are used with organic working fluids. It is inevitable that a small part of the sometimes harmful fluids leaking from the plant - a conflict in the development of climate-friendly renewable energy actually. A short report of the Centre for Energy Technology at the University of Bayreuth, on behalf of UBA quantifies the emissions of fluorinated hydrocarbons for different development scenarios and emission rates. [German] Strom aus Erdwaerme im Niedertemperaturbereich kann effizient gewonnen werden, wenn Kraftwerksprozesse mit organischen Arbeitsmedien einsetzt werden. Dabei ist es nicht zu vermeiden, dass ein kleiner Teil der mitunter klimaschaedlichen Fluide, aus den Anlagen entweicht - ein Zielkonflikt beim Ausbau der eigentlich klimaschonenden erneuerbaren Energie. Ein Kurzgutachten des Zentrums fuer Energietechnik der Universitaet Bayreuth im Auftrag des UBA quantifiziert die Emissionen fluorierter Kohlenwasserstoffe fuer verschiedene Ausbauszenarien und Emissionsraten.

  15. Threshold limit values, test values and sanitation values for soil sanitation; Richt-, Pruef- und Sanierungswerte fuer den Bodenschutz

    Energy Technology Data Exchange (ETDEWEB)

    Karlaganis, G.; Dettwiler, J. [Bundesamt fuer Umwelt, Wald und Landschaft (BUWAL), Bern (Switzerland). Abt. Stoffe, Boden, Biotechnologie

    1998-09-01

    Soils, the basis for human, plant and animal life, are exposed to quantitative and qualitative deterioration. Quantitative deterioration refers to paving of ground but also to erosion and soil destruction. There are new regulations for physical protection of soil which refer to soil erosion, compacting and handling of soil during building construction. (orig.) [Deutsch] Boden als natuerliche Lebensgrundlage fuer Mensch, Tiere und Pflanzen ist quantitativen und qualitativen Beeintraechtigungen ausgesetzt. Als quantitative Beeintraechtigung gilt jede Art von Verminderungen der Boeden durch Bauten und Anlagen, aber auch durch Erosion oder Bodenschwund. Erlassen worden sind nun neue Bestimmungen fuer drei Bereiche des physikalischen Bodenschutzes, naemlich fuer die Bodenerosion, die Bodenverdichtung und fuer den Umgang mit dem Boden vor allem beim Bauen. Die Verordnung vom 1. Juli 1998 ueber Belastungen des Bodens (VBBo`98) erhaelt neu drei Arten von Beurteilungs- bzw. Massnahmewerten, naemlich Richtwerte, Sanierungswerte und Pruefwerte. (orig./ABI)

  16. Solar charge regulator and operation management for PV island systems with modern memory-programmable control (SPS); Solarladeregler und Betriebsmanagement fuer PV-Inselsysteme mit moderner Speicherprogrammierbarer Steuerung (SPS)

    Energy Technology Data Exchange (ETDEWEB)

    Dohlen, K. v.; Nussberger, B. [ENNOS Gesellschaft fuer Innovative Energiesysteme mbH, Freiburg (Germany)

    1998-12-01

    Modern memory programmable controls (SPS) are good value for money, powerful and have such a low power consumption that they are suitable for control and regulation purposes in PV island systems. The development of the solar charge regulators and operation management on the basis of an SPS shown in the article was carried out with the super-imposed target of increasing the use of proven standard industrial products in their construction and simplifying their operation and raising their reliability. [Deutsch] Moderne Speicherprogrammierbare Steuerungen (SPS) sind preiswert, leistungsfaehig und besitzen inzwischen eine so niedrige Leistungsaufnahme, dass sie zu Steuer- und Regelzwecken in PV-Inselsystemen geeignet sind. Die Entwicklung des im Beitrag vorgestellten Solarladereglers und Betriebsmanagement auf der Basis einer SPS stand unter der uebergeordneten Zielsetzung, PV-Anlagen durch den Einsatz von bewaehrten Standard-Industrieprodukten in ihrem Aufbau und der Bedienung zu vereinfachen und in ihrer Zuverlaessigkeit zu steigern. (orig.)

  17. 2008 GRS specialized forum

    International Nuclear Information System (INIS)

    Butz, H.P.

    2008-01-01

    After the successful trial run in 2007, the 2008 GRS Specialized Forum held at the Cologne Wolkenburg on April 7 and 8, 2008 was a full success. GRS, Gesellschaft fuer Anlagen- und Reaktorsicherheit, plans to resume in this way its GRS specialized lectures series with a tradition of many years. Approximately 180 participants from public authorities, licensees, the nuclear industry, research and engineering establishments as well as universities showed their interest in current GRS activities. On 2 days, only GRS experts presented fundamental and GRS-specific approaches in scientific analysis, new research findings, and possibilities of advancing scientific methods under the four headings of Reactor Safety Research and Evaluation, Topical Subjects of Reactor Safety, Radiation Protection Activities, and Repository Safety and Environmental Research. The discussions held after each presentation offered a number of critical, but valuable and welcome, contributions from the different perspectives of the discussants. (orig.)

  18. 3D laser scanning in plant and pipeline engineering; 3D-Laserscanning im Anlagen- und Rohrleitungsbau

    Energy Technology Data Exchange (ETDEWEB)

    Weber, T. [Kaeser und Reiner, Ingenieurbuero fuer Vermessung und Geoinformation, Fellbach (Germany)

    2006-05-15

    3D laser scanning has been in use for a number of years now in the fields of surveying, building and factory planning. Laser scanning can, however, provide a highly supportive and helpful tool for the plant and piping designer, too. The benefits of this technology are relevant wherever the geometry of existing systems and subsystems needs to be registered and recorded. This may be the case in planning changes (basic and detail engineering), collision checks, documentation, plant relocations and visual?display projects. (orig.)

  19. Acceptability analysis of technical-scale plants for electricity generation; Ansatz zur Akzeptabilitaetsanalyse grosstechnischer Anlagen zur Stromerzeugung

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, Katharina; Koch, Marco K. [Bochum Univ. (Germany). AG Reaktorsimulation und -sicherheit

    2013-03-15

    Public acceptance of technical-scale plants for electricity generation is an indispensable prerequisite for the long-term continuity of supply of electricity. Even though nuclear power in Germany continues to meet with particularly grave objections, this is no longer an exception. Problems associated with the rapidly declining willingness of the public to accept specific disadvantages connected with electricity generation are confronting not only nuclear, but also large fossil-fired and renewable-resource power plants. To investigate to what extent these objections based on subjective heuristics are justified, a model is developed for analyzing the objective acceptability of electricity-producing large power plants, which allows the assessment of their acceptability to be measured on the basis of quantitative analysis of the discrepancies between acceptability and acceptance and may serve as a tool for promoting public acceptance. (orig.)

  20. Licensing and supervision of nuclear facilities in Finland; Genehmigung und Aufsicht von nuklearen Anlagen in Finnland

    Energy Technology Data Exchange (ETDEWEB)

    Laaksonen, J. [STUK - Radiation and Nuclear Safety Authority, Helsinki (Finland)

    2006-01-01

    In Finland, the licensing process of all nuclear facilities is specified in the Nuclear Energy Act. The licensing procedure comprises three steps, each of which requires a decision by the government: basic decision, construction permit, and operating license. All licensing decisions are taken upon application to the Ministry of Trade and Industry. The Ministry invites comments and opinions on a broad basis and drafts a statement for the government. The basic decision by the government is political, pre-supposing a positive statement by the Central Office for Nuclear Safety (STUK) and a positive decision by the local government of the planned plant location. The construction permit and the operating license are mainly based on points of nuclear safety. STUK is the independent nuclear supervisory agency with administrative powers; its staff has the technical and scientific competence required for safety assessments and for supervision. STUK operates under the supervision of the Ministry for Social Affairs and Health which, to demonstrate its independence, has no duties in the energy sector and, in addition, supervises STUK in administrative matters, not in scientific and technical decisions. Internal rules of STUK ensure neutrality also of its staff in matters of energy policy. The activities of STUK as a supervisory and licensing authority in Finland are described in detail for the management of spent nuclear fuel and the new Olkiluoto 3 nuclear power plant currently under construction. (orig.)

  1. Licensing and supervision of nuclear facilities in Finland; Genehmigung und Aufsicht von nuklearen Anlagen in Finnland

    Energy Technology Data Exchange (ETDEWEB)

    Laaksonen, J. [Finnish Centre for Radiation and Nuclear Safety (STUK), Helsinki (Finland)

    2005-07-01

    STUK is the independent nuclear supervisory agency in Finland with administrative powers; its staff has the technical and scientific competence required for safety assessments and for supervision. STUK operates under the supervision of the Ministry for Social Affairs and Health which, to demonstrate its independence, has no duties in the energy sector and, in addition, supervises STUK in administrative matters, not in scientific and technical decisions. Internal rules of STUK ensure neutrality also of its staff in matters of energy policy. The activities of STUK as a supervisory and licensing authority in Finland are described in detail for the management of spent nuclear fuel and the new Olkiluoto 3 nuclear power plant currently under construction. (orig./GL)

  2. 42

    CERN Document Server

    Lehr, Thomas

    2005-01-01

    Nicht weit von Genf, der Stadt der Atomphysiker, Diplomaten und Uhrmacher, liegen die unterirdischen Anlagen des Kernforschungszentrums CERN. Als an einem sonnigen Augusttag eine Besuchergruppe wieder ans Tageslicht tritt, ist die gesamte Genfer Region, ja ganz Europa in einen Dornröschenschlaf gefallen. Die Besucher bewegen sich wie in einer "Fotografie der Welt". Steht die Zeit still? Was ist geschehen? Hat der Teilchenbeschleuniger eine Zeitkatastrophe verursacht? Die 70 "Chronifizierten" müssen mit einer traumatischen Situation von Einsamkeit, Macht und Ohnmacht zurechtkommen, Theorien entwickeln und Strategien des Zusammenlebens erproben. Obwohl für sie die persönliche Zeit weiterläuft, in der sogar Kinder geboren werden, sind sie scheinbar in alle Ewigkeit gefangen in der 42. Sekunde um 12:47 dieses Sommertags - bis nach fünf Jahren aus wahrhaft heiterem Himmel die Weltzeit plötzlich für 3 kostbare Sekunden weitertickt. Aus ihrer Lethargie gerissen, sammelt sich die inzwischen durch Krankheiten ...

  3. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 January - 30 June 2003

    International Nuclear Information System (INIS)

    2003-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [de

  4. Future disposal of sewage sludge in Saxony; Zukuenftige Klaerschlammentsorgung im Freistaat Sachsen

    Energy Technology Data Exchange (ETDEWEB)

    Kowalski, H.D, [Saechsisches Staatsministerium fuer Umwelt und Landesentwicklung, Dresden (Germany)

    1995-11-01

    Early in 1994, the Saxonian ministry of environment and regional development (SMU) commissioned an expertise with the preliminary title ``Concept for long-term strategies for sewage sludge disposal from municipal sewage treatment plants in Saxony``. The objective was to develop and evaluate scenarios and submit proposals for securing sewage sludge disposal in the long-term, making use of existing, planned or envisaged plants. The article presents some of the results of this expertise. (orig./SR) [Deutsch] Das Saechsische Staatsministerium fuer Umwelt und Landesentwicklung (SMU) hat Anfang 1994 unter dem Arbeitstitel `Konzeption fuer die Langfriststrategie zur Klaerschlammentsorgung aus kommunalen Abwasserreinigungsanlagen im Freistaat Sachsen` die Ausarbeitung eines Gutachtens veranlasst. Die Zielstellung bestand darin, unter Nutzung vorhandener, bereits geplanter oder neu zu plandender Anlagen Szenarien zu entwickeln und zu bewerten und Vorschlaege fuer Massnahmen zu unterbreiten, welche es ermoeglichen, langfristig eine Entsorgungssicherheit des Klaerschlammes zu gewaehrleisten. Einige Ergebnisse aus diesem Gutachten sollen im Folgenden vorgestellt werden. (orig./SR)

  5. Resurrecting embryos of the tuatara, Sphenodon punctatus, to resolve vertebrate phallus evolution.

    Science.gov (United States)

    Sanger, Thomas J; Gredler, Marissa L; Cohn, Martin J

    2015-10-01

    The breadth of anatomical and functional diversity among amniote external genitalia has led to uncertainty about the evolutionary origins of the phallus. In several lineages, including the tuatara, Sphenodon punctatus, adults lack an intromittent phallus, raising the possibility that the amniote ancestor lacked external genitalia and reproduced using cloacal apposition. Accordingly, a phallus may have evolved multiple times in amniotes. However, similarities in development across amniote external genitalia suggest that the phallus may have a single evolutionary origin. To resolve the evolutionary history of amniote genitalia, we performed three-dimensional reconstruction of Victorian era tuatara embryos to look for embryological evidence of external genital initiation. Despite the absence of an intromittent phallus in adult tuataras, our observations show that tuatara embryos develop genital anlagen. This illustrates that there is a conserved developmental stage of external genital development among all amniotes and suggests a single evolutionary origin of amniote external genitalia. © 2015 The Author(s).

  6. The neural crest, a multifaceted structure of the vertebrates.

    Science.gov (United States)

    Dupin, Elisabeth; Le Douarin, Nicole M

    2014-09-01

    In this review, several features of the cells originating from the lateral borders of the primitive neural anlagen, the neural crest (NC) are considered. Among them, their multipotentiality, which together with their migratory properties, leads them to colonize the developing body and to participate in the development of many tissues and organs. The in vitro analysis of the developmental capacities of single NC cells (NCC) showed that they present several analogies with the hematopoietic cells whose differentiation involves the activity of stem cells endowed with different arrays of developmental potentialities. The permanence of such NC stem cells in the adult organism raises the problem of their role at that stage of life. The NC has appeared during evolution in the vertebrate phylum and is absent in their Protocordates ancestors. The major role of the NCC in the development of the vertebrate head points to a critical role for this structure in the remarkable diversification and radiation of this group of animals. © 2014 Wiley Periodicals, Inc.

  7. Evaluation of German and international operating experience

    International Nuclear Information System (INIS)

    Stueck, Reinhard; Verstegen, Claus

    2014-01-01

    The systematic analysis of safety-relevant events in nuclear power plants and their causes is a key driver for the further development of nuclear safety. The findings obtained from the evaluation of operating experience in this respect form the basis for both technical and organisational improvements in the plants as well as for adaptations of technical rules and standards. In its role as Technical Safety Organisation advising the German federal government, Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) has been concerned with the detection and analysis of failure mechanisms that underlie events in nuclear power plants at home and abroad since its foundation in 1977. This article provides an overview of the different objectives which are pursued in this context by order of or funded by the Federal Environment Ministry. Here, the focus is on the evaluation of reportable events for the preparation of so-called Information Notices and generic reports as well as for the acquisition of data that can be used for in-depth probabilistic analyses.

  8. The Management System of a TSO, the Example of GRS, Germany. Annex V

    International Nuclear Information System (INIS)

    2018-01-01

    The Integrated Management System of GRS (Gesellschaft für Anlagen- und Reaktorsicherheit gGmbH) as well as its quality policy and the principles are described in the Management Manual with the current version being certified according to DIN EN ISO 9001:2015 by TÜV Rheinland Cert (Germany) and in the Organization Manual of GRS. The Management Manual of Quality (QMM) comprises process descriptions, technical instructions, and standard documents. The Management Manual is accessible via the intranet of GRS. The QMM as well as other information and support services can be delivered upon request to the following email-address: scc@grs.de. The central GRS intranet website of the Integrated Management System gives all staff at GRS quick access to all internal management documents. Through the internal online news bulletin the staff of GRS is informed by the Key Quality Manager (KQM) about the release of new versions of the QMM which is structured according to the table of contents provided.

  9. Literatur zu Gast im Globe

    CERN Multimedia

    2006-01-01

    Der deutsche Schriftsteller Thomas LEHR liest am 23. März 2006 aus seinem Roman '42', einem philosophischen Abenteuerroman über die Suche nach der Zeit, erzählt in einer funkelnden und souveränen Sprache. Eine Welt von vernichtender Schönheit und bizarren Schrecken wartet auf eine Besuchergruppe, die in der Nähe von Genf die unterirdischen Anlagen des Forschungszentrums für Teilchenphysik CERN besichtigt. Als sie um 12:47:42 wieder ans Tageslicht tritt, scheint ganz Europa in einen Dornröschenschlaf gefallen. Allein die 70 Besucher können sich noch bewegen. Monate und Jahre verharrt die Welt wie in einer riesigen dreidimensionalen Fotografie, bis ein wiederum schockierendes Ereignis die 'Chronifizierten' aus ihren physikalischen Spekulationen und seltsamen Lebensformen reisst. Zu dieser literarischen Veranstaltung im 'Globe of Science and Innovation' laden gemeinsam das Generalkonsulat der Bundesrepublik Deutschland in Genf und CERN ein. Vor Beginn der Lesung wird eine Führung in deutscher Sprac...

  10. 48{sup th} Annual meeting on nuclear technology (AMNT 2017). Key topic / Enhanced safety and operation excellence. Focus session: Uncertainty analyses in reactor core simulations

    Energy Technology Data Exchange (ETDEWEB)

    Zwermann, Winfried [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Forschungszentrum

    2017-12-15

    The supplementation of reactor simulations by uncertainty analyses is becoming increasingly important internationally due to the fact that the reliability of simulation calculations can be significantly increased by the quantification of uncertainties in comparison to the use of so-called conservative methods (BEPU- ''Best-Estimate plus Uncertainties''). While systematic uncertainty analyses for thermo-hydraulic calculations have been performed routinely for a long time, methods for taking into account uncertainties in nuclear data, which are the basis for neutron transport calculations, are under development. The Focus Session Uncertainty Analyses in Reactor Core Simulations was intended to provide an overview of international research and development with respect to supplementing reactor core simulations with uncertainty and sensitivity analyses, in research institutes as well as within the nuclear industry. The presented analyses not only focused on light water reactors, but also on advanced reactor systems. Particular emphasis was put on international benchmarks in the field. The session was chaired by Winfried Zwermann (Gesellschaft fuer Anlagen- und Reaktorsicherheit).

  11. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Labour. Period: 1 July - 31 December 2003

    International Nuclear Information System (INIS)

    2004-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers. (orig.) [de

  12. Strain-induced cracking corrosion in pipelines of conventional power plants; Dehnungsinduzierte Risskorrosion in Rohrsystemen von konventionellen Kraftwerksanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Adamsky, F.J.; Kempkes, B. [PreussenElektra Engineering GmbH, Gelsenkirchen (Germany); Ernst, J. [RWE Energie AG, Essen (Germany)

    2000-07-01

    Since the mid-sixties, stress corrosion cracking has been reported in highly loaded components of conventional power plants. Damage investigations were followed by extensive fundamental studies on crack initiation and propagation mechanisms, with particular regard to the water quality. The contribution presents causes, patterns, preferred sites and operating conditions of strain-induced corrosion. [German] Seit Anfang der 60er-Jahre wird ueber Risskorrosionsschaeden im wasserberuehrten Teil konventioneller Kraftwerksanlagen berichtet, die stets an hochbeanspruchten Bereichen festzustellen sind - vorwiegend in unrunden Rohrbogen oder Fallrohrbohrungen von Kesseltrommeln. Den Schadensuntersuchungen schlossen sich umfangreiche Grundsatzuntersuchungen an, um den Mechanismus von Rissbildung und Rissfortschritt kennenzulernen und daraus dann Abhilfemassnahmen abzuleiten. Bei schadhaften Rohrboegen stellte man in den Rissbereichen meist hoehere Unrundheiten fest und bei Kesseltrommeln Spannungsspitzen an den Lochraendern. Der Wasserqualitaet, vornehmlich dem O{sub 2}-Gehalt, der Art der Konservierung bei Stillstaenden und insbesondere haeufigeren Anfahrten bei kleineren und aelteren Anlagen wurde besondere Bedeutung beigemessen. Im Beitrag werden Ursachen, Erscheinungsformen, bevorzugte Bereiche und Betriebszustaende der dehnungsinduzierten Korrosion dargestellt. (orig.)

  13. Three-dimensionally preserved minute larva of a great-appendage arthropod from the early Cambrian Chengjiang biota

    Science.gov (United States)

    Liu, Yu; Melzer, Roland R.; Haug, Joachim T.; Haug, Carolin; Briggs, Derek E. G.; Hörnig, Marie K.; He, Yu-yang; Hou, Xian-guang

    2016-05-01

    A three-dimensionally preserved 2-mm-long larva of the arthropod Leanchoilia illecebrosa from the 520-million-year-old early Cambrian Chengjiang biota of China represents the first evidence, to our knowledge, of such an early developmental stage in a short-great-appendage (SGA) arthropod. The larva possesses a pair of three-fingered great appendages, a hypostome, and four pairs of well-developed biramous appendages. More posteriorly, a series of rudimentary limb Anlagen revealed by X-ray microcomputed tomography shows a gradient of decreasing differentiation toward the rear. This, and postembryonic segment addition at the putative growth zone, are features of late-stage metanauplii of eucrustaceans. L. illecebrosa and other SGA arthropods, however, are considered representative of early chelicerates or part of the stem lineage of all euarthropods. The larva of an early Cambrian SGA arthropod with a small number of anterior segments and their respective appendages suggests that posthatching segment addition occurred in the ancestor of Euarthropoda.

  14. Sewage and sludge treatment process - additive and process-integrated measures. Vol. 1-3. Preprints; Verfahrenstechnik der Abwasser- und Schlammbehandlung - additive und prozessintegrierte Massnahmen. Bd. 1-3. Preprints

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This fourth GVC congress again deals with all aspects of industrial and municipal waste water and sludge treatment; the spectrum ranges from unit operations and segmets of the process line over special treatments of problematic constituents, adapted solutions for measuring and control-technical problems to innovative overall concepts and the operating results of executed plants. Novel programme elements are process-integrated measures for water and waste water treatment aiming to minimize the consumption of the water resource and to recycle it. (orig.) [German] Auch dieser 4. GVC-Abwasser-Kongress behandelt die volle Breite der industriellen und kommunalen Abwasser- und Schlammbehandlung; das Spektrum reicht von den unit operations und Prozessstrecken, ueber die spezielle Behandlung von problematischen Inhaltstoffen, ueber adaptierte messtechnische und regelungstechnische Problemloesungen bis hin zu innovativen Gesamtkonzepten und den Betriebsergebnissen von ausgefuehrten Anlagen. Neu im Programm sind die produktionsintegrierten Massnahmen zur Wasser- und Abwasserbehandlung, die darauf abzielen, die Ressource Wasser zu minimieren und zu recyclieren. (orig.)

  15. Monitoring of lead batteries by means of optical-fibre refractometry; Ueberwachung von Bleiakkumulatoren mittels Faseroptischer Refraktometrie

    Energy Technology Data Exchange (ETDEWEB)

    Gernhold, H P; Hanitsch, R

    1994-12-31

    Electricity storage is an integral part of photovoltaic systems. At the moment, the most economical device for this is the lead battery. Battery life is determined by the charging technique applied and by the efficiency of monitoring. The optimum charging technique is selected in dependence of battery age and charge state. The authors present a method for online charge state monitoring in which the acid concentration is measured by means of optical-fibre refractometry. (orig.) [Deutsch] Ein aeusserst wichtiger Teilbereich von Photovoltaik-Anlagen ist die Speicherung von elektrischer Energie. Diesen Zweck erfuellen Bleiakkumulatoren zur Zeit am wirtschaftlichsten. Es hat sich gezeigt, dass sowohl die angewandte Ladetechnik als auch eine gute Batterieueberwachung entscheidend fuer die Lebensdauer dieser Systemkomponente sind. Die Wahl der optimalen Ladetechnik richtet sich wiederum nach dem Alter und dem Entladegrad der Batterie. Gegenstand dieser Arbeit ist es, eine Methode vorzustellen, mit der die Saeuredichte mittels faseroptischer Refraktometrie gemessen und so der Ladezustand jeder einzelnen Batteriezelle zu jedem Zeitpunkt on-line ueberwacht werden kann. (orig.)

  16. Composition and dosage of a multipartite enhancer cluster control developmental expression of Ihh (Indian hedgehog).

    Science.gov (United States)

    Will, Anja J; Cova, Giulia; Osterwalder, Marco; Chan, Wing-Lee; Wittler, Lars; Brieske, Norbert; Heinrich, Verena; de Villartay, Jean-Pierre; Vingron, Martin; Klopocki, Eva; Visel, Axel; Lupiáñez, Darío G; Mundlos, Stefan

    2017-10-01

    Copy number variations (CNVs) often include noncoding sequences and putative enhancers, but how these rearrangements induce disease is poorly understood. Here we investigate CNVs involving the regulatory landscape of IHH (encoding Indian hedgehog), which cause multiple, highly localized phenotypes including craniosynostosis and synpolydactyly. We show through transgenic reporter and genome-editing studies in mice that Ihh is regulated by a constellation of at least nine enhancers with individual tissue specificities in the digit anlagen, growth plates, skull sutures and fingertips. Consecutive deletions, resulting in growth defects of the skull and long bones, showed that these enhancers function in an additive manner. Duplications, in contrast, caused not only dose-dependent upregulation but also misexpression of Ihh, leading to abnormal phalanges, fusion of sutures and syndactyly. Thus, precise spatiotemporal control of developmental gene expression is achieved by complex multipartite enhancer ensembles. Alterations in the composition of such clusters can result in gene misexpression and disease.

  17. Silicon carbide, a ceramic material for the pump technology?; Siliciumcarbid - eine Keramik fuer die Pumpentechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Vitzthum, E. [CeramTec AG, Lauf (Germany). Marketing und Customer Service

    2000-12-01

    Pumping of gases and liquids makes extreme demands on sliding bearings and their seals, especially if the material to be pumped is corrosive or contains abrasive constituents. Wear and corrosion are important economic factors. They shorten the life of machines and systems and cause standstill times and repair cost. All this decides the profitability of pumps and the competitive strength of products. In view of all this, it becomes clear why optimal materials selection is a crucial points in pumps and pumping systems. [German] Beim Foerdern von Gasen und Fluessigkeiten werden extrem hohe Anforderungen an Gleitlager und Gleitringdichtungen in Pumpen gestellt, die im direkten Kontakt mit dem zu foerdernden Medium sind, besonders dann, wenn das Medium korrosiv ist oder abrasive Bestandteile enthaelt. Verschleiss und Korrosion sind wesentliche Wirtschaftsfaktoren. Sie bestimmen die Standzeit von Maschinen und Anlagen, verursachen Betriebsstillstandszeiten und Reparaturkosten. Diese entscheiden ueber die Rentabilitaet von Prozessen und die Wettbewerbsfaehigkeit von Produkten, was eine optimale Auswahl des Werkstoffs auch in Pumpen und Pumpenanlagen unerlaesslich macht. (orig.)

  18. The endoskeletal origin of the turtle carapace

    Science.gov (United States)

    Hirasawa, Tatsuya; Nagashima, Hiroshi; Kuratani, Shigeru

    2013-01-01

    The turtle body plan, with its solid shell, deviates radically from those of other tetrapods. The dorsal part of the turtle shell, or the carapace, consists mainly of costal and neural bony plates, which are continuous with the underlying thoracic ribs and vertebrae, respectively. Because of their superficial position, the evolutionary origins of these costo-neural elements have long remained elusive. Here we show, through comparative morphological and embryological analyses, that the major part of the carapace is derived purely from endoskeletal ribs. We examine turtle embryos and find that the costal and neural plates develop not within the dermis, but within deeper connective tissue where the rib and intercostal muscle anlagen develop. We also examine the fossils of an outgroup of turtles to confirm that the structure equivalent to the turtle carapace developed independently of the true osteoderm. Our results highlight the hitherto unravelled evolutionary course of the turtle shell. PMID:23836118

  19. Energy indicators; Energiekennzahlen in der Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Mauch, W. [Technische Univ. Muenchen (Germany); Forschungsstelle fuer Energiewirtschaft (FfE), Muenchen (Germany); Layer, G. [Forschungsstelle fuer Energiewirtschaft (FfE), Muenchen (Germany); Schneider, J. [Ogreb-Institut fuer Kraftwerke, Cottbus (Germany). Abt. Prozessforschung und Energetik; Ministerium fuer Umwelt, Naturschutz, Energie und Reaktorsicherheit, Berlin (Germany); Bundeswirtschaftsministerium, Bonn (Germany). Energieabteilung

    2004-07-01

    Indicators of the energy requirements of industrial plants, production processes and products provide criteria for evaluating resource consumption, emissions and saving potential. Energy indicators are used as base data for energy concepts and holistic energy balances in the framework of the exchange of information on best available techniques. The following contribution describes a methodology for the determination of energy indicators for industrial production plants. On this basis, it then analyses a number of example processes, i.e. manufacture of mineral chips and asphalt, provision of compressed air, and flue gas dedusting. (orig.) [German] Kennzahlen ueber den Energiebedarf von industriellen Anlagen, Herstellungsverfahren und Erzeugnissen liefern Kriterien zur Beurteilung des Ressourcenaufwands, der Emissionen und Einsparpotenziale. Als Basisdaten fuer Energiekonzepte und ganzheitliche Bilanzierungen eingesetzt dienen Energiekennzahlen dem Informationsaustausch ueber die besten verfuegbaren Techniken. Nachfolgend wird die methodische Vorgehensweise zur Ermittlung von Kennzahlen fuer industrielle Produktionsanlagen beschrieben. Auf dieser Basis werden beispielhaft die Mineralsplitter- und Asphaltherstellung sowie die Druckluftbereitstellung und -entstaubung analysiert. (orig.)

  20. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2003. Progress report

    International Nuclear Information System (INIS)

    2003-01-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of the investigations into the safety of nuclear power plants by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system ''Joint Safety Research Index'' of the CEC (commission of the european communities). The reports are arranged in sequence of their project numbers

  1. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany. Reporting period 1993. Progress report

    International Nuclear Information System (INIS)

    1994-10-01

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general information of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  2. Economical valuation of standing-stability checks on light-poles; Wirtschaftliche Bewertung der Standsicherheitspruefung an Lichtmasten. Pruefungen wirtschaftlicher als Mastaustausch

    Energy Technology Data Exchange (ETDEWEB)

    Bathe, J.; Feige, S. [Hochschule (FH), Zittau/Goerlitz (Germany); Tempel, S. [Stadtwerke Zittau GmbH, Zittau (Germany)

    2002-03-25

    In order to minimise the possible liability due to negligence, it is necessary for companies that operate road-lights to care for their safety as well. One point of consideration therefore is testing for instability which, due to corrosion, increases specifically with age. This duty can be fulfilled, either by exchanging the poles regularly, or by checking their standing-stability and exchanging only those necessary. In the following article, the question is discussed under which circumstances standing stability tests are more economical than simply exchanging poles regularly. (orig.) [German] Betreiber von Strassenbeleuchtungen muessen fuer die Sicherheit der Anlagen sorgen, um eine Haftung wegen Fahrlaessigkeit auszuschliessen. Ein Aspekt dabei ist die Standsicherheit der Lichtmasten. Dieser Pflicht kann entweder durch einen regelmaessigen Austausch oder durch eine Standsicherheitspruefung aelterer Masten mit bedarfsgerechtem Austausch nicht mehr normgerechter Masten Rechnung getragen werden. Die Verfasser diskutieren, unter welchen Bedingungen Standsicherheitspruefungen wirtschaftlich vorteilhafter als ein regelmaessiger Mastaustausch sind. (orig.)

  3. Tests on the stability of the displacement current in a cubic space; Untersuchungen zur Stabilitaet der Verdraengungsstroemung in einem Kubusraum

    Energy Technology Data Exchange (ETDEWEB)

    Gores, I.; Fitzner, K. [Technische Univ. Berlin (Germany). Hermann-Rietschel-Institut fuer Heizungs- und Klimatechnik

    2000-07-01

    Air current flow rates inside rooms have considerable effect on thermal comfort. Apart from the forced air currents of air conditioning systems, there are upward and downward currents near heat sources and heat sinks. If both types of air currents are superposed, the maximum air flow rate may increase, resulting in reduced thermal comfort. Greater internal loads in modern office buildings (e.g. call centres) lead one to expect increasing problems as air current flow rates get faster with increasing loads. [German] Die Luftgeschwindigkeiten in Innenraeumen haben einen wichtigen Einfluss auf die thermische Behaglichkeit. Neben den erzwungenen Luftstroemungen durch RLT-Anlagen beeinflussen insbesondere auch Auf- und Abtriebsstroemungen an Waermequellen bzw. -senken die Aufenthaltszone. Bei der Ueberlagerung der beiden Stroemungen kann es zu einer Verstaerkung der maximalen Luftgeschwindigkeit kommen, die zu Unbehaglichkeit fuehrt. Die Zunahme der inneren Lasten in heutigen Buerogebaeuden (z.B. Callcenter) laesst eine Verschaerfung des Problems erwarten, da die Luftgeschwindigkeiten mit steigender Last zunehmen. (orig.)

  4. Gas production and storage - gas transport and supply. Colloquium 7th conference proceedings; Gasfoerderung und Gasspeicherung - Gastransport und Gasversorgung. Kolloquium 7. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, S. [ed.] [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bohrtechnik und Fluidbergbau; Koeckritz, V. [comp.

    1999-07-01

    The colloquium papers discuss trends in gas supply engineering, automtion of gas storages, liberalisation of the gas market, and gas management systems in integrated supply systems. Rock-mechanical problems of natural gas storage caverns are mentioned. Further subjects are gas extraction rom coal seams, power generation from gas in fuel cells, a model for blowout calculation of real gases, and vortex tubes in gas pressure reduction systems. 19 contributions have been recorded separately in this database. [German] Die einzelnen Beitraege des Kolloquiums befassen sich mit den Entwicklungen in der Gasversorgungstechnik, mit der Automatisierung von Gasspeichern, mit der Liberalisierung des Gasmarktes sowie mit Gasmanagementsystemen in Verbundnetzen. Neben der Gasspeicherung in Porenspeichern und Salzkavernen, deren Sicherheit und der Soleversenkung, sind Betraege zu gebirgsmechanischen Problemen in Erdgasspeicherkavernen enthalten. Weitere Themen sind die Gasfoerderung aus Steinkohlefloezen, die Energieerzeugung aus Gas in Brennstoffzellen, ein Modell zur Blowout-Berechnung realer Gase sowie Wirbelrohre in Anlagen zur Gasdruckminderung. Fuer die Datenbank Energy wurden 19 Beitraege separat aufgenommen.

  5. Guide to distribution network planning and system design. Development of decentralized electricity systems; Leitfaden zur Verteilnetzplanung und Systemgestaltung. Entwicklung dezentraler Elektrizitaetssysteme

    Energy Technology Data Exchange (ETDEWEB)

    Sillaber, Alfons

    2016-07-01

    The following topics are dealt with: Meet demand, robustness, economics, supply reliability, facility structures, transport capacity, voltage management, short-circuit management, net operation, planning techniques and systematics. (HSI)

  6. Contributions to naive quantum mechanics. A textbook for mathematicians and physicists; Beitraege zur naiven Quantenmechanik. Ein Leitfaden fuer Mathematiker und Physiker

    Energy Technology Data Exchange (ETDEWEB)

    Kohlmann, Martin

    2009-07-01

    The present text examplifies by means of 60 citations from current textbooks for the study of physics the necessarity of a mathematically rigorous formulation of quantum mechanics. Well known statements of many physicists about quantum mechanics at their mathematical tool kit are commented in form of a dialogue und mathematical points of view. Supplemented are the representations by a selection of theorems of higher analysis relevant for quantum theory. The book applies to mathematicians and mathematically interested physicists or students with founded mathematical knowledge.

  7. Project management for the decommissioning and dismantling of nuclear facilities; Projektmanagement fuer Stilllegung und Rueckbau kerntechnischer Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Klasen, Joerg; Wilhelm, Oliver [ENBW Kernkraft GmbH, Neckarwestheim (Germany); Seizer, Burkhard; Schuetz, Tobias [Drees und Sommer, Stuttgart (Germany)

    2015-12-15

    The decommissioning of nuclear power plants is executed in a classic project manner as it is known from other construction projects. It is obvious to use the known portfolio of project management tools. The complexity that is created by the large size of the project in combination with safety requirements of the nuclear industry has to be handled. Complexity can only be managed addressing two main drivers: Prioritization and speed (agility) in project execution. Prioritization can be realized by applying tools like Earned Value Management. A high speed of project execution is established by applying Agile Management like SCRUM-methods. This method is adopted in the context of the cooperation ''Complex Projects'' to the needs of nuclear industry.

  8. Cutting and decontamination technologies for nuclear facility dismantling; Technologien zur Zerlegung und zur Dekontamination von kerntechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, Felix; Grone, Georg von; Schultmann, Frank

    2017-03-15

    The German Government's decision to phase-out nuclear power will lead to a substantial increase of the number of nuclear decommissioning and dismantling projects. The decommissioning of nuclear facilities must meet the requirements of the radiation protection ordinance. This study deals with the decontamination and dismantling technologies available to meet radiation protection requirements. The aim of this study is to determine the state of the art in the field of decommissioning and dismantling technologies. Furthermore, future trends in the development and application of such technologies should be identified. A detailed study of current literature provides an overview of established decommissioning technologies. Moreover, experts were consulted in order to facilitate a practical assessment. The experts' statements indicate that (apart from the chemical decontamination of the primary circuit) the use of mechanical methods is generally preferred. Abrasive methods are rated as particularly efficient. According to the experts, the development of new decontamination technologies may allow a more efficient decontamination. However, the success of a new technology will be subject to its application costs. Mechanical technologies are preferred for the dismantling of nuclear facilities. The band saw has been identified as a standard tool in nuclear dismantling. The survey has concluded that there is no need for new dismantling technologies. The potential lies in the optimization of existing processes and techniques. With regard to remotely operated systems, experts' opinions vary on whether the use of these systems will increase in future. Most areas inside a nuclear facility have low radiation levels that allow the use of human labour for the dismantling. However, there is a need for an improvement in the allocation and management of decommissioning projects.

  9. Helium cryosystem for the X-ray laser LCLS-II; Heliumkryosystem fuer den Roentgenlaser LCLS-II

    Energy Technology Data Exchange (ETDEWEB)

    Pflueckhahn, Dirk; Fauve, Eric; Heloin, Vincent; Ravindranath, Viswanath; Ross, Marc [SLAC National Accelerator Laboratory, Menlo Park, CA (United States)

    2017-07-01

    The Linac Coherent Light Source-II project represents the expansion of the LCLS free-electron laser, which has been successfully operated at the SLAC National Accelerator Laboratory since 2009. In collaboration with several national institutes, 37 cryomodules with superconducting accelerator cavities will be installed in a 700 m long section of the existing tunnel. The use of superconducting accelerator technology will enable particle energy of up to 4 GeV in CW (continuous wave) operation. Two identical cryogenic systems with an equivalent output of 18 kW each at 4.5 K are described below. The plants supply the linear accelerator with helium at several temperature levels. Superfluid helium II provides the cooling necessary to maintain superconductivity in the cavities. The operating temperature of the 1.3 GHz cavities has been set at 2 K. Two further helium circuits are used for shield cooling at approx. 35 K and cooling of heat loads at 5 K level. The purely dynamic compression of the cold helium vapour is a technical feature of the systems described here. In a five-stage chain of cold compressors of 32 mbar at the cavities, it is absolutely compressed to the suction pressure of the circulation compressors at approx. 1 bar. [German] Das Linac Coherent Light Source-II Projekt stellt die Erweiterung des seit 2009 erfolgreich betriebenen Freie- Elektronen-Lasers LCLS am SLAC National Accelerator Laboratory dar. In Kollaboration mit mehreren nationalen Instituten werden in einem 700 m langen Teilstueck des bereits bestehenden Tunnels 37 Kryomodule mit supraleitenden Beschleunigerkavitaeten installiert. Der Einsatz von supraleitender Beschleunigertechnologie wird eine Teilchenenergie von bis zu 4 GeV im CW (continous wave) Betrieb ermoeglichen. Zwei identische Kryoanlagen mit einer aequivalenten Leistung von je 18 kW bei 4,5 K werden im Folgenden beschrieben. Die Anlagen versorgen den Linearbeschleuniger mit Helium auf mehreren Temperaturniveaus. Superfluides Helium

  10. 6. conference: Thermal waste management; 6. Fachtagung: Thermische Abfallbehandlung

    Energy Technology Data Exchange (ETDEWEB)

    Faulstich, M.; Urban, A.; Bilitewski, B. (eds.)

    2001-07-01

    Ersatzbrennstoffe stehen etablierte kommunale und industrielle Anlagen zur Mitverbrennung zur Verfuegung. Darueber hinaus sind etliche Unternehmen im Begriff, spezielle Heizwerke oder Heizkraftwerke fuer diese Brennstoffe zu errichten. Die klassischen Muellverbrennungsanlagen, also die Anlagen mit Rosttechnik, gehoeren damit jedoch keineswegs zum alten Eisen, im Gegenteil, sie weisen nach wie vor ein grosses Optimierungs- und Innovationspotenzial auf. Ausgewaehlte neue Konzepte fuer Feuerungen, Kessel, Korrosionsminderung und Rauchgasreinigung werden hier diskutiert. Nicht zuletzt gewinnen die Kosten in der kommunalen Abfallwirtschaft so auch bei der Abfallverbrennung seit Jahren an Bedeutung. Das Benchmarking ist dabei zu einem wichtigen Vergleichs- und Bewertungsinstrument geworden und das Internet wird die Moeglichkeit zukuenftig noch erweitern. Diese sechste Fachtagung ist fuer Hersteller und Betreiber, Planer und Berater sowie die Fachleute aus Verwaltung und Wissenschaft ein umfassendes Forum zur Thermischen Abfallbehandlung geworden. (orig.)

  11. Techniques of material-flow-specific residual waste treatment; Techniken der stoffstromspezifischen Restabfallbehandlung

    Energy Technology Data Exchange (ETDEWEB)

    Maak, D.; Collins, H.J. [Technische Univ. Braunschweig, Leichtweiss - Inst. fuer Wasserbau (Germany)

    1998-09-01

    The success achieved with large-scale plants for mechanical-biological residual waste treatment has led to a change of course in waste pretreatment. In view of the low emissions via the water and gas routes from landfilled wastes and the low costs of waste treatment some authorising authorities have meanwhile issued special licences pursuant to clause no. 2.4 of the Technical Code on Household Waste, thus enabling mechanical-biological residual waste treatment plants to continue operations beyond the year 2005. Beside offering a means of treatment and disposal, cost-effective mechanical-biological pretreatment also provides an opportunity for going over to material-flow-specific residual waste treatment. These process stages permit recirculating valuable materials and using other materials for energy production. They can be retrofitted on a modular basis in existing plants. If these advantages of the present innovative pretreatment methods are not used, then mechanical-biological pretreatment can still serve as a preparatory stage for thermal treatment. To date there has been no practical experience with this innovative method of residual waste treatment. However, industrial-scale trials have shown that each individual treatment stage is capable of being carried out successfully. [Deutsch] Die guten Erfolge im grosstechnischen Betrieb von Anlagen zur mechanisch-biologischen Restabfallbehandlung haben zu einer Kursaenderung bei der Vorbehandlung von Abfaellen gefuehrt. Geringe Emissionen der deponierten Abfaelle auf dem Gas- und Wasserpfad sowie geringe Kosten fuer die Behandlung der Abfaelle haben dazu gefuehrt, dass inzwischen bereits einige Genehmigungsbehoerden eine Ausnahmegenehmigung nach Nr. 2.4 der TA Siedlungsabfall erteilt haben und damit der Betrieb von mechanisch-biologischen Restabfallbehandlungsanlagen auch nach 2005 ermoeglicht wird. Neben der alleinigen Behandlung und Deponierung bietet die kostenguenstige Vorbehandlung mit mechanisch

  12. A guide for implementation of the European Pollutant Emission Register (EPER) in Germany; Leitfaden zur Umsetzung des Europaeischen Schadstoffemissionsregisters (EPER) in Deutschland

    Energy Technology Data Exchange (ETDEWEB)

    Kuehne, C.; Striegel, G.

    2001-10-01

    The report presents specifications for implementing the European Pollutant Emission Register (EPER) in Germany. [German] Gemaess Artikel 15 (3) der Richtlinie 96/61/EG ueber die integrierte Vermeidung und Verminderung der Umweltverschmutzung ('IVU-Richtlinie') veroeffentlicht die Kommission alle drei Jahre ein Verzeichnis der wichtigsten Emissionen und ihrer Quellen anhand der von den Mitgliedstaaten uebermittelten Informationen. Fuer die Mitgliedstaaten ergibt sich hieraus die Verpflichtung, die erforderlichen Daten zu erheben, auszuwerten und der Europaeischen Kommission zu berichten. In der Entscheidung der Kommission vom 17. Juli 2000 ueber den Aufbau eines Europaeischen Schadstoffemissionsregisters (EPER- 'European Pollutant Emission Register') 2000/479/EG ('EPER-Entscheidung') werden die Anforderungen an Inhalt und Form dieses Verzeichnisses konkretisiert: - Die Mitgliedstaaten berichten der Kommission ueber die Emissionen in die Luft und in das Wasser aus einzelnen Betriebseinrichtungen. Zu berichten sind die Emissionen bestimmter Schadstoffe, die ueber vorgegebenen Schwellenwerten liegen. Das Berichtsformat fuer die Mitgliedstaaten ist im Anhang A2 der EPER-Entscheidung festgelegt. - Der erste Bericht ist im Juni 2003 vorzulegen und soll Angaben ueber Emissionen im Jahr 2001 (bzw. wahlweise 2000 oder 2002) enthalten. Jeder Mitgliedstaat muss zudem einen zusammenfassenden nationalen Uebersichtsbericht erstellen. - Die Europaeische Kommission wird die Emissionsdaten ueber das Internet der Oeffentlichkeit zugaenglich machen. Fuer die Erhebung der fuer das EPER erforderlichen Daten in Deutschland wird ein schrittweises Vorgehen empfohlen: - Am Anfang steht die Identifizierung von Betriebseinrichtungen mit Taetigkeiten nach Anhang I der IVU-Richtlinie. - Angabe des NACE-Kodes der Betriebseinrichtung und Zuordnung der Anhang I-Taetigkeiten (Quellenkategorie) und des NOSE-P-Kodes gemaess Anhang A3 der EPER-Entscheidung. - Festlegung der Haupttaetigkeit und des zugehoerigen NOSE-P-Hauptkodes. - Ermittlung der Emissionen fuer die in Anhang A1 der EPER-Entscheidung genannten Schadstoffe in Form von Jahresfrachten. Die Art der Ermittlung der Jahresfracht (Messung, Berechnung oder Schaetzung) ist anzugeben. - Dokumentation des Vorgehens und die Aufnahme der fuer das EPER erforderlichen Stammdaten der Betriebseinrichtungen und deren Emissionsdaten in eine vom Umweltbundesamt zur Verfuegung gestellten EPER-Software. Es werden die Grundzuege der EPER-Software beschrieben und das Vorgehen bei der Datenerfassung anhand von Eingabemasken beispielhaft vorgestellt. (orig.)

  13. Wind power installations in Switzerland - Guidelines for the analysis of environmental impact; Windkraftanlagen in der Schweiz - Leitfaden fuer die Analyse der Umweltauswirkungen

    Energy Technology Data Exchange (ETDEWEB)

    Ott, W.; Kaufmann, Y.; Steiner, P. [Econcept AG, Zuerich (Switzerland); Gilgen, K.; Sartoris, A. [IRAP-HSR, Institut fuer Raumentwicklung an der Hochschule fuer Technik Rapperswil, Rapperswil (Switzerland)

    2008-07-01

    This report published by the Swiss Federal Office of Energy (SFOE) provides guidelines concerning the impact of the construction of wind-energy installations on the environment in Switzerland. The report aims to ascertain the relevant environmental aspects of the construction of such wind turbines. If no relevant restrictions apply, the acceptance of such wind power installations is said to increase. The guidelines also recommend a standardised course of action and provide sources of information for investors that are necessary for successful planning. The results which can be obtained by using these guidelines can be used to compile a short-form report for cantonal environment protection agencies. An appendix contains an example of the structure of such a report.

  14. Cities and mobility: a planning guideline for community-compatible mobility; Stadtwege: Planungsleitfaden fuer Stadtvertraegliche Mobilitaet in Kommunen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Verkehrsmittelalternativen. Der vorliegende Leitfaden moechte neue Perspektiven aufzeigen und damit Planerinnen und Planern vor Ort Anregungen geben. Er fasst Ergebnisse aus dem Forschungsprojekt 'Stadtvertraegliche Mobilitaet' zusammen und beschreibt neue Impulse und Leitorientierungen in der kommunalen Verkehrsplanung und -politik. (orig.)

  15. PV-BUK: Operating and maintenance costs of photovoltaic installations; PV-BUK - Betriebs- und Unterhaltskosten von PV-Anlagen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stettler, S.; Toggweiler, P. [Enecolo AG, Moenchaltorf (Switzerland); Ruoss, D.; Schudel, P. [Envision, Lucerne (Switzerland); Kottmann, A.; Steinle, F. [BE Netz AG, Lucerne (Switzerland)

    2008-03-15

    This final report elaborated for the Swiss Federal Office of Energy (SFOE) takes a look at the results of a project carried out to determine the costs for facility management, to estimate future cost development and to propose activities for the further reduction of the operation and maintenance costs of photovoltaic systems. Information on the cost situation was collected by literature study, as well as in interviews and surveys with photovoltaic (PV) experts and the owners of PV installations. The discussion of the results at a workshop with about 20 Swiss PV experts is noted. The results are presented and discussed. These show that operating costs per kWh decrease with the size of the PV system. Figures are quoted. The major part of the costs are quoted as being those for spare parts, especially for the inverter. The authors are of the opinion that, in future, costs for facility management will further decrease, as they are partly linked to capital and insurance costs. Potential for optimisation is said to exist in several areas of facility management such as, for example, in system monitoring and fast reaction in the case of malfunctions.

  16. Experiences from the acid stimulation of geothermal aquifers and plants; Erfahrungen bei der Saeurestimulation geothermaler Aquifere und Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Wolfgramm, Markus; Birner, Johannes; Lenz, Gerhard; Hoffmann, Frank; Rinke, Manfred [Geothermie Neubrandenburg GmbH, Berlin (Germany)

    2012-10-16

    In the course of the exploration of geothermal aquifers up to the operation of geothermal power plants, the utilization of acids and other substances such as inhibitors or powerful oxidants to secure enhanced productivities are of great significance. At the molasses basin, drillings which explore the carbonates of the Malm are stimulated repeatedly by means of hydrochloric acid after the sinking. Information from the drilling operation such as mud losses and cutting analyses are the basis for the design of stimulations. The subsequent implementation of test operations (cleaning lift, casing-lift-test in several stages) is used to estimate the short production run and the efficiency of the specific acidification. It also can be decided whether further acidifications are reasonable. Within the operation of geothermal power plants, different failures occur in the drillings as well as in the aboveground facility components. Failures can be minimized by means of the production management and inhibitors. Nevertheless, not all reasons of the scaling can be excluded fully so that regular measures are necessary in order to eliminate the failures. These measures range from mechanical methods through the combined utilization of mechanical-chemical procedures up to different methods of acidification. Beside the so-called soft acidification, stimulations via 'coiled tubing' or via utilization of acid threads with 'packer' also are possible. The investigation of the causes of the operational disturbances as well as the correct planning of the measures are significant for the application of the said stimulation processes.

  17. Success factors for the acceptance of renewable energy production plants; Erfolgsfaktoren fuer die Akzeptanz von Erneuerbare-Energie-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Walter, Goetz [Zuerich Univ. (Switzerland). Lehrstuhl Sozialpsychologie; Krauter, Sven; Schwenzer, Andreas [The Advisory House GmbH, Muenchen (Germany)

    2011-03-15

    The majority of the German population is in support of the expansion of renewable energies. However, when it comes to construction work, project developers often meet with fierce opposition from the local population. One success factor in raising local acceptance of renewable energy production plants lies in planning projects such that citizens' interests and concerns are taken into account and well-conceived means of public participation are provided. Moreover, municipalities themselves can take on a pivotal role by becoming actively involved in the planning and development process and advertising renewable energy as a way towards municipal emancipation. This gives citizens less reasons to make a stand against such projects.

  18. Automatic diagnosis of oscillating control loops in complex industrial plants; Automatische Diagnose oszillierender Regelkreise in komplexen industriellen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Jelali, Mohieddine [VDEh-Betriebsforschungsinstitut GmbH, Duesseldorf (Germany). Abt. Prozess- und Anlagenautomatisierung; Karra, Srinivas [Applied Manufacturing Technologies, Houston, TX (United States)

    2010-07-15

    Oscillations in control loops are one of the widespread problems in the process industry. Oscillations lead to increased variability in product quality, higher energy consumption, productivity losses and increased wear of plant components. This paper presents a new approach for the automatic and comprehensive diagnosis of oscillating valve-controlled processes, based on the identification of a Hammerstein model. The proposed method not only detects and quantifies valve stiction, but is also able to find out and distinguish between faults, such as aggressive controller tuning or external oscillatory disturbances, which may occur simultaneously to stiction. (orig.)

  19. Diffuse Deckenlüftung

    DEFF Research Database (Denmark)

    Zhang, Chen; Yu, Tao; Heiselberg, Per Kvols

    Richtung in den Raum geleitet (daher auch der Namensteil „diffus“). Im Vergleich zu herkömmlichen Lüftungsanlagen (Misch- oder Verdrängungslüftung) kann die diffuse Deckenlüftung das Risiko eines Luftzugs im Raum erheblich reduzieren oder sogar vermeiden. Darüber hinaus bietet diese Lüftungsanlage die...... vielversprechende Möglichkeit, Energie einzusparen. Dies liegt am geringen Druckverlust, an dem längeren Zeitraum der freien Kühlung und dem großen Potenzial der Nachtkühlung. Die Investitionskosten für eine Anlage für die diffuse Deckenlüftung sind 5 bis 10 % geringer als die für herkömmliche Anlagen, da die...... Akustikdecke direkt als Luftverteiler verwendet werden kann. Durch den Einsatz eines Hohlraums für die Luftverteilung fallen zudem auch die Kosten für Luftkanäle niedriger aus. Das Interesse daran, die diffuse Deckenlüftung in Büros und anderen Gewerbegebäuden einzusetzen, wächst aufgrund der Vorteile in Bezug...

  20. Wind energy utilisation. 7. enl. and compl. rev. ed.; Nutzung der Windenergie

    Energy Technology Data Exchange (ETDEWEB)

    Heier, Siegfried [Kassel Univ. (Germany)

    2016-07-01

    The use of wind energy register furthermore rapid technological advances. Intensive research efforts in scientific institutions and in industry have led to it that the plants are reliable high technology products today. An overview of these developments give the completely revised BINE reference-book. The focus is on technologies, concepts and the market development of the wind industry. Other topics include network integration, economy and current research perspectives as well as environmental balance and repowering. Planners, investors and students get an overview of the status and development of the technology, the economy and the legal framework. [German] Die Nutzung der Windenergie verzeichnet weiterhin rasante technologische Fortschritte. Intensive Forschungsanstrengungen an wissenschaftlichen Institutionen und in der Industrie haben dazu gefuehrt, dass die Anlagen heute zuverlaessige Hightech Produkte sind. Einen Ueberblick ueber diese Entwicklungen gibt das vollstaendig ueberarbeitete BINE-Fachbuch. Im Mittelpunkt stehen Technologien, Konzepte und die Marktentwicklung der Windbranche. Weitere Themen sind die Netzintegration, Wirtschaftlichkeit und aktuelle Forschungsperspektiven sowie Umweltbilanz und Repowering. Planer, Investoren und Studierende erhalten einen Ueberblick ueber Stand und Entwicklung der Technik, die Wirtschaftlichkeit sowie die rechtlichen Rahmenbedingungen.

  1. Ageing degradation mechanisms in nuclear power plants: lessons learned from operating experience

    International Nuclear Information System (INIS)

    Bieth, M.; Zerger, B.; Duchac, A.

    2014-01-01

    This paper presents main results of a comprehensive study performed by the European Clearinghouse on Operating Experience Feedback of Nuclear Power Plants (NPP) with the support of IRSN (Institut de Surete Nucleaire et de Radioprotection) and GRS (Gesellschaft fuer Anlagen und Reaktorsicherheit mbH). Physical ageing mechanisms of Structures, Systems and Components (SSC) that eventually lead to ageing related systems and components failures at nuclear power plants were the main focus of this study. The analysis of ageing related events involved operating experience reported by NPP operators in France, Germany, USA and to the IAEA/NEA International Reporting System on operating experience for the past 20 years. A list of relevant ageing related events was populated. Each ageing related event contained in the list was analyzed and results of analysis were summarized for each ageing degradation mechanism which appeared to be the dominant contributor or direct cause. This paper provides insights into ageing related operating experience as well as recommendations to deal with the physical ageing of nuclear power plant SSC important to safety. (authors)

  2. Combining mechanical-biological residual waste treatment plants with grate firing; Kombination MBA mit Rostfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Fleck, E. [ABB Umwelttechnik GmbH, Butzbach (Germany)

    1998-09-01

    The promulgation of the Technical Code on Household Waste obliges the local authorities responsible for waste disposal to review existing and prepare new waste management plans. Given the present state of the art the Code`s limit value for loss due to burning of 5% makes thermal treatment of the residual waste practically compulsory. In preparation of these developments and in order to lower costs in general and be able respond flexibly to customer demands ABB is currently undertaking great efforts to provide thermal residual waste treatment plants with a modular design. [Deutsch] Mit Veroeffentlichung der TASi wurden die entsorgungspflichtigen Gebietskoerperschaften gezwungen, bereits vorhandene Abfall-Wirtschaftsplaene zu ueberarbeiten bzw. neue zu erstellen. Technisch laeuft nach derzeitigem Wissensstand der in der TASi vorgegebene maximale Gluehverlust von 5% darauf hinaus, dass eine thermische Behandlung des Restabfalls zwingend vorgegeben ist. Um hierfuer geruestet zu sein, aber auch um generell Kosten zu senken unf flexibel auf Kundenwuensche eingehen zu koennen, unternimmt ABB grosse Abstrengungen, den Aufbau von Anlagen zur thermischen Restabfallbehandlung modular zu gestalten. (orig./SR)

  3. Four variations of the Mondini inner ear malformations as seen in microdissections.

    Science.gov (United States)

    Johnsson, L G; Hawkins, J E; Rouse, R C; Kingsley, T C

    1984-01-01

    Four variations and degrees of severity of the Mondini malformation were found in the temporal bones from two neonates, one with congenital heart disease and the other with trisomy D, and from one teenager with leukemia: 1) short cochlea and normal vestibular organs; 2) short cochlea and persistent horizontal canal anlage; 3) markedly shortened cochlea with no modiolus, wide internal auditory meatus, and persistent horizontal canal anlage; 4) same as variation 3, but with persistent anlagen in all semicircular canals. Variations 3 and 4 were from the case of trisomy D, in which the left cochlea had a normal hair cell population but few nerve fibers, and the intraganglionic spiral bundle was displaced from Rosenthal's canal to the osseous spiral lamina. The right ear had no cochlear nerve fibers; the organ of Corti was present, but hair cells were unusually small. In the case of trisomy D, both ears showed subtotal loss of vestibular nerve fibers. Although the rudimentary cristae of the right ear had numerous hair cells, the macular hair cells were fewer and malformed. No hydrops was present.

  4. Validation of ANSYS CFX for gas and liquid metal flows with conjugate heat transfer within the European project THINS

    Energy Technology Data Exchange (ETDEWEB)

    Papukchiev, A., E-mail: angel.papukchiev@grs.de; Buchholz, S.

    2017-02-15

    Highlights: • ANSYS CFX is validated for gas and liquid metal flows. • L-STAR and TALL-3D experiments are simulated. • Complex flow and heat transfer phenomena are modelled. • Conjugate heat transfer has to be considered in CFD analyses. - Abstract: Within the FP7 European project THINS (Thermal Hydraulics of Innovative Nuclear Systems), numerical tools for the simulation of the thermal-hydraulics of next generation rector systems were developed, applied and validated for innovative coolants. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH participated in THINS with activities related to the development and validation of computational fluid dynamics (CFD) and coupled System Thermal Hydraulics (STH) – CFD codes. High quality measurements from the L-STAR and TALL-3D experiments were used to assess the numerical results. Two-equation eddy viscosity and scale resolving turbulence models were used in the validation process of ANSYS CFX for gas and liquid metal flows with conjugate heat transfer. This paper provides a brief overview on the main results achieved at GRS within the project.

  5. VVER 1000 SBO calculations with pressuriser relief valve stuck open with ASTEC computer code

    International Nuclear Information System (INIS)

    Atanasova, B.P.; Stefanova, A.E.; Groudev, P.P.

    2012-01-01

    Highlights: ► We modelled the ASTEC input file for accident scenario (SBO) and focused analyses on the behaviour of core degradation. ► We assumed opening and stuck-open of pressurizer relief valve during performance of SBO scenario. ► ASTEC v1.3.2 has been used as a reference code for the comparison study with the new version of ASTEC code. - Abstract: The objective of this paper is to present the results obtained from performing the calculations with ASTEC computer code for the Source Term evaluation for specific severe accident transient. The calculations have been performed with the new version of ASTEC. The ASTEC V2 code version is released by the French IRSN (Institut de Radioprotection at de surete nucleaire) and Gesellschaft für Anlagen-und Reaktorsicherheit (GRS), Germany. This investigation has been performed in the framework of the SARNET2 project (under the Euratom 7th framework program) by Institute for Nuclear Research and Nuclear Energy – Bulgarian Academy of Science (INRNE-BAS).

  6. Center for Nuclear Safety in Central and Eastern Europe: a platform for co-operation

    International Nuclear Information System (INIS)

    Tomik, L.; Kichev, E.

    2003-01-01

    The paper presents a summary of the current status and the activities of the Centre of Nuclear Safety in Central and Eastern Europe (CENS). The CENS is a non-profit and independent association supported by the Swiss and Slovak Governments. The main mission of the CENS is to provide an independent platform for technical co-operation between the regulatory authorities of the Western and Eastern countries. The key partners of the CENS are the Swiss Federal Nuclear Safety Inspectorate (HSK), the International Atomic Energy Agency (IAEA), the US Department of Energy (US DOE), the Nuclear Regulatory Authority of the Slovak Republic (UJD), the Gesellschaft fuer Anlagen-und Reaktorsicherheit mbH (GRS), Germany and the Institute of Radiation Protection and Nuclear Safety (IRSN), France. The CENS programs for 2003-2004 are presented. It can be considered as a complement to the IAEA activities in the area of short-term and event urgent planning. CENS projects as an example are presented. CENS proposals for co-operation with the Bulgarian institutions are made in connection with the topics of the forum round table discussions

  7. Safety aspects and safety measures for the refrigerants N{sub 3} and F-CFC and CFC; Sicherheitsaspekte/Sicherheitsmassnahmen fuer Kaeltemittel NH{sub 3} und FCKW/FKW

    Energy Technology Data Exchange (ETDEWEB)

    Stuerchler, P. [GfG AG, Binz (Switzerland)

    2001-09-01

    Experts agree that ammonia is the best and most economical refrigerant for a number of applications, e.g. in skating rinks, the food industry, chemical plants, etc. It has good thermodynamic properties and a low ozone-depleting potential, but it is also an aggressive and toxic substance. The potential hazard to humans and plants can be reduced, however, by early detection of leaks. There are different specifications in different European countries. In Switzerland, the EKAS regulations apply. [German] In der Kaelteindustrie herrscht eine Uebereinstimmung, dass fuer eine Vielzahl von Anlagen, z.B. Eissportanlagen, Lebensmittelbetriebe, Chemieanlagen u.v.m., Ammoniak als das beste und wirtschaftlichste Kaeltemittel betrachtet wird. Die guten thermodynamischen Eigenschaften und das geringe Ozonabbaupotential haben Ammoniak zum wichtigsten Kaeltemittel in mittleren und Grossanlagen gemacht. Die aggressive und giftige Chemikalie Ammoniak birgt jedoch ein nicht zu unterschaetzendes Gefahrenpotential fuer Mensch und Anlage. Diese Gefahr kann weitestgehend eingedaemmt werden. Eine fruehe und zuverlaessige Erkennung von Leckagen minimiert deren Auswirkungen und Schaeden. Die Vorschriften hierzu sind laenderspezifisch in den Verordnungen und Richtlinien festgelegt. Fuer die Schweiz gelten die Richtlinien der EKAS. (orig.)

  8. Organisation of municipal gas supply; Organisation einer kommunalen Gasversorgung. Theoretische und praktische Betrachtungen

    Energy Technology Data Exchange (ETDEWEB)

    Wolters, T.

    2000-07-01

    A safe supply of gas requires more than technically secure facilities and components. A structured and suitable organisation of the company's set-up and proceeding is necessary as well. In a diploma thesis, which was honored by the DVGW, theses aspects were treated as well in theory as well as in examples. Finally, a proposel for a gas supply company was developed which offered to translate into practice the results of the thesis. The thesis discusses issues of maintaining gas supply facilities and issues of the faultclearing service as well as aspects of the worker's protection laws. (orig.) [German] Eine sichere Gasversorgung verlangt mehr als technisch sichere Anlagen und Komponenten. Hierzu ist auch besonders eine planvolle und angemessene Aufbauorganisation und Ablauforganisation des Unternehmens notwendig. In einer vom DVGW ausgezeichneten Diplomarbeit wurden diese Aspekte theoretisch und an Beispielen erarbeitet, um letztlich einem Gasversorgungsunternehmen einen konkreten Vorschlag fuer die Umsetzung des Erarbeiteten zu unterbreiten. Fragen der Instandhaltung von Gasversorgungsanlagen und des Entstoerdienstes finden ebenso Beachtung wie die Umsetzung von Forderungen aus der Arbeitsschutzgesetzgebung. (orig.)

  9. Network systems and cloud applications in livestock farming

    Directory of Open Access Journals (Sweden)

    Daniel Herd

    2014-10-01

    Full Text Available Der Einsatz von Automatisierungstechnik und von Sensoren zur Tierüberwachung wächst und damit auch die Datenmenge aus der Tierhaltung. Die Herausforderungen an die Datenanalyse und einfache Informationsdarstellung steigen. Die Beispiele aus Wissenschaft und Praxis zeigen Lösungsmöglichkeiten. Dabei müssen Anlagen unterschiedlicher Hersteller gekoppelt und Daten zielgerichtet ausgewertet werden. Während in wissenschaftlich orientierten Projekten meist Systeme unterschiedlicher Hersteller vertreten sind, um z. B. die Kommunikation und Kooperation zu stärken sowie komplexe Fragestellungen zu beantworten, wird dies in herstellerspezifischen Projekten eher vermieden, da hier der konkrete Anwendervorteil im Vordergrund steht. Anhand ausgewählter Beispiele wird dargestellt, dass mobile Anwendungen als Frühwarnsysteme für Gesundheitsveränderungen in Beständen oder zur Anlagensteuerung implementiert und genutzt werden. Insgesamt ist deutlich zu erkennen, dass sich die Datenauswertung und –nutzung in die Cloud verschiebt. Mit diesen Cloudsystemen erweitert sich das Spektrum der Datenauswertung dahingehend, dass komplexe Algorithmen und mobile Services (Apps, Webberatung oder soziale Netzwerke umgesetzt werden.

  10. Cellular and muscular growth patterns during sipunculan development.

    Science.gov (United States)

    Kristof, Alen; Wollesen, Tim; Maiorova, Anastassya S; Wanninger, Andreas

    2011-05-15

    Sipuncula is a lophotrochozoan taxon with annelid affinities, albeit lacking segmentation of the adult body. Here, we present data on cell proliferation and myogenesis during development of three sipunculan species, Phascolosoma agassizii, Thysanocardia nigra, and Themiste pyroides. The first anlagen of the circular body wall muscles appear simultaneously and not subsequently as in the annelids. At the same time, the rudiments of four longitudinal retractor muscles appear. This supports the notion that four introvert retractors were part of the ancestral sipunculan bodyplan. The longitudinal muscle fibers form a pattern of densely arranged fibers around the retractor muscles, indicating that the latter evolved from modified longitudinal body wall muscles. For a short time interval, the distribution of S-phase mitotic cells shows a metameric pattern in the developing ventral nerve cord during the pelagosphera stage. This pattern disappears close to metamorphic competence. Our findings are congruent with data on sipunculan neurogenesis, as well as with recent molecular analyses that place Sipuncula within Annelida, and thus strongly support a segmental ancestry of Sipuncula. Copyright © 2011 Wiley-Liss, Inc., A Wiley Company.

  11. Low-capacity wind power systems. Technology, legal aspects, economic efficiency; Kleine Windenergieanlagen. Technik - Recht - Wirtschaftlichkeit

    Energy Technology Data Exchange (ETDEWEB)

    Eggersgluess, Walter [Landwirtschaftskammer Schleswig-Holstein, Rendsburg (Germany); Eckel, Henning; Hartmann, Stefan [Kuratorium fuer Technik und Bauwesen in der Landwirtschaft e.V. (KTBL), Darmstadt (Germany)

    2012-07-01

    In what conditions will investments in a low-capacity wind power plant be profitable? This leaflet intends to provide a decision aid for farmers and other land owners interested in thes subject. It outlines the technology of low-capacity wind power systems, goes into site selection, expected yields and legal boundary conditions. The most important economic data are defined, and the economic efficiency of wind power plants of 7.5 to 25 kW is discussed. The text is supplemented by useful internet links. [German] Unter welchen Bedingungen rechnet sich die Investition in eine kleine Windenergieanlage? Das Heft hilft Landwirten sowie allen anderen investitionswilligen Grundstueckseigentuemern fuer sich Antworten auf diese Fragen zu finden und die richtigen Entscheidungen zu treffen. Es gibt einen Ueberblick ueber die Technik kleiner Windenergieanlagen, beschreibt was den richtigen Standort auszeichnet, mit welchen Energieertraegen gerechnet werden kann und welchen rechtlichen Rahmenbedingungen Bau und Betrieb der Anlagen unterliegen. Die wichtigsten wirtschaftlichen Kenngroessen werden definiert und die Wirtschaftlichkeit kleiner Windenergieanlagen anhand von Beispielanlagen im Leistungsbereich von 7,5 bis 25 kW diskutiert. Nuetzliche Internetadressen zum Thema Windenergie runden das Informationsangebot ab.

  12. 33. MPA seminar 2007. Proceedings; 33. MPA Seminar 2007. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    In a single PDF file, the CD-ROM contains all papers presented at the 33. MPA Seminar in Stuttgart. Subjects: Life management of nuclear facilities: Materials, integrity analysis, fracture mechanics; Behaviour of welds; Material development and qualification for power plants with enhanced steam parameters; monitoring concepts (e.g. state monitoring of components, test concepts); Design of pipelines with flanged joints; Assembly and joining technology for flanged joints; Non-destructive testing in plant engineering; Materials for new nuclear reactors. Many of the papers are available as separate items in this database. [German] In einer einzigen PDF-Datei sind auf der CD-ROM alle Vortraege enthalten, die auf dem 33. MPA-Seminar in Stuttgart gehalten wurden. Die Themenschwerpunkte sind: Lebensdauermanagement kerntechnischer Anlagen - Werkstoffverhalten, Integritaetsanalyse, Bruchmechanik; Verhalten von Schweissverbindungen; Werkstoffentwicklung und -qualifizierung fuer Kraftwerke mit erhoehten Dampfparametern; Ueberwachungskonzepte (z.B. Zustandsueberwachung von Komponenten, Pruefkonzepte); Auslegung von Rohrleitungen mit Flanschverbindungen; Montage- und Dichtungstechnik fuer Flanschverbindungen; Zerstoerungsfreie Pruefung in der Anlagentechnik; Werkstoffe fuer neue Kernreaktoren. Ein grosser Teil der Vortraege wurde separat aufgenommen.

  13. Prostaglandin E2 Regulates Liver versus Pancreas Cell Fate Decisions and Endodermal Outgrowth

    Science.gov (United States)

    Nissim, Sahar; Sherwood, Richard I.; Wucherpfennig, Julia; Saunders, Diane; Harris, James M.; Esain, Virginie; Carroll, Kelli J.; Frechette, Gregory M.; Kim, Andrew J.; Hwang, Katie L.; Cutting, Claire C.; Elledge, Susanna; North, Trista E.; Goessling, Wolfram

    2014-01-01

    SUMMARY The liver and pancreas arise from common endodermal progenitors. How these distinct cell fates are specified is poorly understood. Here, we describe prostaglandin E2 (PGE2) as a regulator of endodermal fate specification during development. Modulating PGE2 activity has opposing effects on liver-versus-pancreas specification in zebrafish embryos as well as mouse endodermal progenitors. The PGE2 synthetic enzyme cox2a and receptor ep2a are patterned such that cells closest to PGE2 synthesis acquire a liver fate whereas more distant cells acquire a pancreas fate. PGE2 interacts with the bmp2b pathway to regulate fate specification. At later stages of development, PGE2 acting via the ep4a receptor promotes outgrowth of both the liver and pancreas. PGE2 remains important for adult organ growth, as it modulates liver regeneration. This work provides in vivo evidence that PGE2 may act as a morphogen to regulate cell fate decisions and outgrowth of the embryonic endodermal anlagen. PMID:24530296

  14. Service planning. Methods for quality assurance in manufacturing; Instandhaltungs-Planung. Methoden zur Qualitaetssicherung in der Fertigung

    Energy Technology Data Exchange (ETDEWEB)

    Lapp, H.

    1995-12-31

    , Produktionsausfaellen, Sach- und Gebaeudeschaeden. Dieses Buch wendet sich an Instandhalter der Industrie und an Handwerksbetriebe sowie an Instandhalterplaner, die sich mit der Instandhaltung mechanischer Anlagen beschaeftigen. Es enthaelt Planungsbeispiele, die als Anleitung und Anregung fuer die eigene Arbeit gedacht sind. Die Beispiele sind keine Rezepte, sondern sollen Tips und Hinweise geben fuer eigene Ueberlegungen zur Planung der Instandhaltung. Tabellen mit Begriffen und Formularvorschlaegen zur Erstellung von Terminplaenen, Checklisten und Arbeitskarten geben Hilfestellung beim Aufbau einer eigenen Instandhalteplanung. Geplante Instandhaltung traegt dazu bei, dass die Nutungsdauer der Anlagen verlaengert, der Anlagenwert verbessert und die maximale Einsatzbereitschaft gewaehrleistet wird. Die Instandhalteplanung umfasst neben der Erstellung von Terminplaenen, codierbaren Arbeitskarten und Betriebsmittellisten auch Messprotokolle, Maengelberichte, Schadensmeldungen und Schwachstellenanalysen. Vorgenannte Planung kann auch den Betreibern von Fertigungsanlagen ueber EDV angeboten werden. Durch die Codierung der Instandhaltetaetigkeiten, Schadensteile und Schadensbilder (Maengelbegriffe) koennen auch Instandhalte-Angebote von Fremdfirmen eingeholt werden. (orig.)

  15. Fuel cells for the electricity supply of plants remote from the grid; Brennstoffzellen fuer die Elektrizitaetsversorgung von netzfernen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Ledjeff, K

    1996-12-31

    The solar house at Freiburg, which is independent for energy, obtains all its energy only from the radiation impinging on the outside of the building. The space heating, provision of hot water, energy for cooking and electricity are provided by conversion of solar energy. A photo-electric generator supplies electricity which, apart from direct consumption, can be stored in a lead battery and the hydrogen system. The hydrogen system is the last link in the chain of the energy converter and represents the only energy supply if the thermal and electrical systems cannot any longer be supplied by the sun. The hydrogen system must therefore cover the energy demand in winter, consisting of a small heater for space heating and of course the fuel cell for providing electricity. The ideal fuel cell system for the solar house, which is independent for energy, is the PEMFC with an output of 500 W-1 kW. (orig./MM) [Deutsch] Das Energieautarke Solarhaus in Freiburg bezieht die gesamte Energie nur aus der auf die Gebaeudehuelle auftreffende Strahlung. Die Raumheizung, die Warmwasserbereitung, die Energie zum Kochen und der elektrische Strom werden durch die Umwandlung von Sonnenenergie bereitgestellt. Ein Photovoltaik-Generator liefert elektrische Energie, die neben dem direkten Verbrauch in eine Bleibatterie und das Wasserstoffsystem zur Speicherung eingespeist werden kann. Die Wasserstoffspeicherung erfolgt als Gas bei einem Druck von 30 bar. Das Wasserstoffsystem ist das letzte Glied in der Kette der Energiewandler und stellt den einzigen Energievorrat dar, wenn die thermischen und elektrischen Systeme nicht mehr solar versorgt werden koennen. Das Wasserstoffsystem muss daher den Energiebedarf im Winter decken, das sich ein kleiner Nachheizer fuer die Raumheizung und natuerlich die Brennstoffzelle zur Bereitstellung elektrischer Energie. Das ideale Brennstoffzellensystem fuer das Energieautarke Solarhaus ist die PEMFC mit einer Leistung von 500 W-1 kW. (orig./MM)

  16. Operationelles Risikomanagement von Schweizer Vorsorgeeinrichtungen : Status quo und zukunftsgerichteter Leitfaden für Geschäftsführerinnen und Geschäftsführer

    OpenAIRE

    Moor, Markus; Mussak, Pirmin; Zeier Röschmann, Angela

    2016-01-01

    Studie Die vorliegende Studie untersucht den Stand des operationellen Risikomanagements von Schweizer Vorsorgeeinrichtungen. Während der Entwicklungsstand insgesamt fortgeschritten ist, bestehen noch Lücken in der Risikoidentifikation, der Risikoberichterstattung und der Berücksichtigung des Reputationsrisikos. Darüber hinaus lassen sich deutliche Unterschiede zwischen kleinen und grossen Vorsorgeeinrichtungen erkennen.

  17. Rotating UPS installations and dynamic energy storage. Comparison of static and rotating UPS and comparison of dynamic energy storage using batteries - Final Report; Rotierende USV-Anlagen und dynamische Energiespeicherung. Vergleich der statischen mit rotierenden USV-Anlagen und Vergleich der dynamischen Energiespeicherung mit Batterieanlagen - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Mauchle, P.; Schnyder, G.

    2010-01-15

    As an alternative to the static UPS-Systems (uninterruptible power supply systems), rotating UPS-Systems can be applied. The application and the realisation of rotating UPS-Systems are different to the one of static UPS-Systems. Furthermore at the rotating UPS-Systems is to distinguish, if the UPS-System is realised as a diesel dynamic UPS-System, with an activity up from 400 kVA, or if the dynamic part is limited to the energy storage, with an activity up from 60 kVA. The diesel dynamic UPS-Systems are composed of a synchronous machine, an asynchronous machine with a flywheel, respectively a kinetic module and the diesel engine. The connection to the critical user at the low voltage network occurs using an inductor and the accordant switchgears. The application of a diesel dynamic UPS-System is optimal when it can be connected with an emergency power supply. With the realisation of dynamic energy storages, battery systems can be avoided respectively can be reduced or the lifetime of batteries can be extended. It is only possible to avoid the batteries if the requested autonomous time of the UPS-System is shorter than two minutes. Is an autonomous time longer than 2 minutes necessary, battery systems have to be realised for the energy storage. Thereby dynamic energy storage in parallel to the battery system is useful, because the dynamic energy storage will compensate temporary voltage drops or short power failures. In this way the number of charge and discharge cycles of the battery system will be reduced and therefore the lifetime of the battery will be extended. The use of a dynamic or static UPS system is dependent on the requirements of the powered load. Taking into account various criteria it can be found for each specific application the optimal type of UPS system. (authors)

  18. Combination of a pyrolysis plant with a hard coal power station firing system; Kombination einer Pyrolyseanlage mit einer Steinkohlekraftwerksfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, W.; Hauk, R. [Vereinigte Elektrizitaetswerke Westfalen AG (VEW), Dortmund (Germany)

    1998-09-01

    VEW ENERGIE AG plans and operates power plants and thermal plants for the disposal of residual materials (e.g. household waste, sewage sludge, used wood, residues from paper manufacture). In order to make itself familiar with the market for secondary fuels the company undertook a study to find out what cost-effective techniques are available on the market and how power plants can be used for optimal energy use and with a minimum of disposal costs. Its choice finally fell on pyrolysis because this technology is the most flexible for the thermal and physical utilisation of substitute fuels. Moreover, pyrolysis combines very well with power plants. [Deutsch] VEW ENERGIE AG plant und betreibt Kraftwerke und thermische Anlagen zur Entsorgung von Reststoffen (z.B. Hausmuell, Klaerschlamm, Altholz, Reststoff aus der Papierherstellung). Um sich auf dem Markt der Ersatzbrennstoffe einzustellen, wurde untersucht, welche kostenguenstigen Techniken auf dem Markt verfuegbar sind und wie Kraftwerke zur optimalen Energienutzung und zur Minimierung der Entsorgungskosten eingesetzt werden koennen. Die Pyrolysetechnik wurde ausgewaehlt, weil sie am flexibelsten fuer die thermische und stoffliche Verwertung der Ersatzbrennstoffe ist. Sie laesst sich auch sehr gut mit Kraftwerken kombinieren. (orig.)

  19. Heat tracing with flexible metal hoses. New calculation program for reliable and economic design; Begleitheizung mit flexiblen Metallschlaeuchen. Neues Berechnungsprogramm fuer zuverlaessige und wirtschaftliche Auslegung

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, B. [Witzenmann GmbH, Pforzheim (Germany)

    2003-07-01

    Heat tracing does not only allow the transport of chocolate through pipe systems; particularly in chemical plants it ensures a stable viscosity of the transported media or protects it from freezing. By using flexible metal hoses instead of rigid copper or stainless steel pipes, the installation costs can be reduced considerably. Until now, no verified fundamental design principles or calculation programs for heat tracing with metal hoses were available. However, these are essential for a reliable and economical operation, as well as for a minimisation of the investment costs. Based on extensive field and laboratory measurements, a dedicated calculation model has now been established and verified. (orig.) [German] Begleitheizungen ermoeglichen nicht nur bei Schokolade den Transport durch Rohrleitungen. Vor allem in chemischen Anlagen erhalten sie die Viskositaet der transportierten Medien oder schuetzen gegen Einfrieren. Durch Verwendung von flexiblen Metallschlaeuchen anstelle von Glattrohren aus Kupfer oder Edelstahl laesst sich der Montageaufwand betraechtlich reduzieren. Fuer diese Metallschlauch-Begleitheizungen gab es bisher keine verifizierten Auslegungsgrundlagen oder Berechnungsprogramme. Fuer eine zuverlaessigen und wirtschaftlichen Betrieb sowie eine Minimierung der Investitionskosten sind diese jedoch unerlaesslich. Nun wurde auf der Basis umfangreicher Betriebs- und Labormessungen ein Berechnungsmodell erstellt und verifiziert. (orig.)

  20. Review of advances in human reliability analysis of errors of commission, Part 1: EOC identification

    International Nuclear Information System (INIS)

    Reer, Bernhard

    2008-01-01

    In close connection with examples relevant to contemporary probabilistic safety assessment (PSA), a review of advances in human reliability analysis (HRA) of post-initiator errors of commission (EOCs), i.e. inappropriate actions under abnormal operating conditions, has been carried out. The review comprises both EOC identification (part 1) and quantification (part 2); part 1 is presented in this article. Emerging HRA methods addressing the problem of EOC identification are: A Technique for Human Event Analysis (ATHEANA), the EOC HRA method developed by Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS), the Misdiagnosis Tree Analysis (MDTA) method, and the Commission Errors Search and Assessment (CESA) method. Most of the EOCs referred to in predictive studies comprise the stop of running or the inhibition of anticipated functions; a few comprise the start of a function. The CESA search scheme-which proceeds from possible operator actions to the affected systems to scenarios and uses procedures and importance measures as key sources of input information-provides a formalized way for identifying relatively important scenarios with EOC opportunities. In the implementation however, attention should be paid regarding EOCs associated with familiar but non-procedural actions and EOCs leading to failures of manually initiated safety functions

  1. Photovoltaics in buildings. Final report; Photovoltaik in Gebaeuden. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Erge, T.; Hullmann, H.; Kaiser, R.; Kovach-Hebling, A.; Laukamp, H.; Reise, C.; Sauer, D.U.; Schmid, J.; Schmidt, H.; Sick, F.

    1996-08-31

    The feasibility in principle of photovoltaic plants integrated in buildings was proved in the 1980`s in the context of several pilot and demonstration projects both in Germany and internationally. However, the realisation and operation of these plants showed the necessity for further research and development work both in the system technique and particularly in the architectural area. The research project `Photovoltaics in buildings` reached the target of establishing a bridge between the technically orientated work of the researchers, developers and manufacturers of photovoltaic components on the one hand, and the architects and town planners on the other hand. (orig./AKF) [Deutsch] Die prinzipielle Machbarkeit gebaeudeintegrierter Photovoltaikanlagen wurde in den 80er Jahren im Rahmen mehrerer Pilot- und Demonstrationsprojekte sowohl in der Bundesrepublik Deutschland als auch international nachgewiesen. Die Realisierung und der Betrieb dieser Anlagen zeigte jedoch die Notwendigkeit weiterer Forschungs- und Entwicklungsarbeiten sowohl im systemtechnischen als insbesondere auch im architektonischen Bereich auf. Mit dem Forschungsprojekt `Photovoltaik in Gebaeuden` wurde das Ziel erreicht, eine Bruecke zu schlagen zwischen den eher technisch orientierten Arbeiten der Forscher, Entwickler und Hersteller von Photovoltaikkomponenten auf der einen Seite und den Architekten und Stadtplanern auf der anderen. (orig./AKF)

  2. Scientific publications of Kernforschungszentrum Karlsruhe in 1980

    International Nuclear Information System (INIS)

    1981-04-01

    The report gives the titles of the publications that appeared in 1980. It is the first time that such reports are not available in print yet are separated from the bibliography. As regards the patents all patent rights granted and published in 1980 are mentioned: patents, patent applications, and patent specifications for public inspection. The publications list is classified according to institutes. As to the projects only the published project reports and publications from collaborators of the respective project staff are specified. The list also contains the publications printed in the Kernforschungszentrum and concerning the following research- and development projects: Prozesslenkung mit DV-Anlagen (PDV), Rechenunterstuetztes Entwickeln, Konstruieren und Fertigen (CAD), and Fertigungstechnik (PFT) ; the Kernforschungszentrum is effecting these projects in co-operation with other firms and institutes with the Kernforschungszentrum being project manager. Moreover, the list contains the publications from the branch office of the Bundesforschungsanstalt fuer Ernaehrung (federal research institute for alimentation) situated in the KFK-area. The last section of the list gives publications on guest experiments carried out in the Kernforschungszentrum. The list is provided with an alphabetic author register referring to page- and recording-numbers. (orig./HP) [de

  3. Patterns of spatial and temporal visceral arch muscle development in the Mexican axolotl (Ambystoma mexicanum).

    Science.gov (United States)

    Ericsson, Rolf; Olsson, Lennart

    2004-08-01

    Vertebrate head development is a classical topic that has received renewed attention during the last decade. Most reports use one of a few model organisms (chicken, mouse, zebrafish) and have focused on molecular mechanisms and the role of the neural crest, while cranial muscle development has received less attention. Here we describe cranial muscle differentiation and morphogenesis in the Mexican axolotl, Ambystoma mexicanum. To determine the onset of differentiation we use antibodies against desmin and optical sectioning using confocal laser scanning microscopy on whole-mount immunostained embryos. This technique makes it possible to document the cranial muscle in three dimensions while keeping the specimens intact. Desmin expression starts almost simultaneously in the first, second, and third visceral arch muscles (as in other amphibians studied). Muscle anlagen divide up early into the different elements which constitute the larval cranial musculature. We extend and refine earlier findings, e.g., by documenting a clear division between interhyoideus and interhyoideus posterior. The timing of cranial muscle differentiation differs among vertebrate groups, but seems to be constant within each group. This study provides a morphological foundation for further studies of muscle cell fate and early differentiation. Copyright 2004 Wiley-Liss, Inc.

  4. Fundamentals of combustion research. Final report 2000; Grundlagen der Verbrennungsforschung. Abschlussbericht 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    All ten projects were aimed at modelling and validation of practically relevant natural gas flames. Modelling comprises the use,l development and enhancement of advanced combustion and turbulence models, e.g. PDF models or higher order Reynolds stress models. Validation uses modern laser diagnostics, e.g. spontaneous Raman scattering, LIF spectroscopy, and LDA. The practical applicability is ensured by a 150 kW flame whose characteristics can be extrapolated to industrial-scale plants. For this, four identical experiments were set up in the TECFLAM institutes of Stuttgart, Karlsruhe, Heidelberg, and Darmstadt. [German] Gemeinsames Projektziel der vorliegenden zehn Vorhaben ist die Modellentwicklung und Validierung anwendungsnaher Erdgasflammen. Unter Modellentwicklung ist dabei die Nutzung, Entwicklung und Weiterentwicklung fortschrittlicher Verbrennungs- und Turbulenzmodelle wie PDF-Modelle oder Reynolds-Stress-Modelle hoeherer Ordnung zu verstehen. Validierung wird durchgefuehrt mittels moderner Laserdiagnostik-Verfahren, wie der spontanen Raman-Streuung, der LIF-Spektroskopie sowie LDA-Verfahren. Die Anwendungsnaehe wird sichergestellt durch eine Flamme mit 150 kW Leistung, deren Verhalten auf grosstechnische Anlagen extrapolierbar ist. Um dieses ehrgeizige Ziel zu erreichen, wurden vier identische Versuchsaufbauten in den TECFLAM-Instituten in Stuttgart, Karlsruhe, Heidelberg und Darmstadt errichtet. (orig.)

  5. Optimised fuel cell operation management. Final report; Optimiertes Betriebsmanagement von Brennstoffzellen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-11-05

    Investigations were carried out on two fuel cell systems of the type ONSI PC 25C (large fuel cells) and three fuel cell heaters of the type HXS 1000 PREMIERE by Sulzer HEXIS (small fuel cells) for long periods of time and in different modes of operation. Information was obtained on efficiencies and performance, pollutant emissions, degradation and availability. The status of the project is reported and compared with the goals stated initially. (orig.) [German] Das Hauptziel des Projektes bestand darin, Kriterien fuer den optimalen Betrieb (hohe Verfuegbarkeit, geringe Anzahl von Abschaltungen, hohe Energienutzung etc.) von Brennstoffzellen im Zusammenspiel mit den peripheren Komponenten der Gebaeudetechnik zu ermitteln. Hierzu wurden Untersuchungen an zwei Brennstoffzellen-Anlagen vom Typ ONSI PC 25C (grosse BZ) und an drei Brennstoffzellen-Heizgeraeten HXS 1000 PREMIERE von Sulzer HEXIS (kleine BZ) ueber laengere Zeitraeume und bei weitestgehend unterschiedlichen Betriebsweisen durchgefuehrt. In Auswertung dieser Messkomplexe wurden Aussagen zum Betriebsverhalten der Brennstoffzellen, wie z.B. zu Wirk- und Nutzungsgraden, Schadstoffemissionen, Verlauf der Degradation sowie zur Verfuegbarkeit getroffen. Im vorliegenden Bericht wird der erreichte Sachstand detailliert dargestellt und mit den Zielsetzungen des FuE-Antrages verglichen. (orig.)

  6. CSNI Project for Fracture Analyses of Large-Scale International Reference Experiments (Project FALSIRE)

    International Nuclear Information System (INIS)

    Bass, B.R.; Pugh, C.E.; Keeney-Walker, J.; Schulz, H.; Sievers, J.

    1993-06-01

    This report summarizes the recently completed Phase I of the Project for Fracture Analysis of Large-Scale International Reference Experiments (Project FALSIRE). Project FALSIRE was created by the Fracture Assessment Group (FAG) of Principal Working Group No. 3 (PWG/3) of the Organization for Economic Cooperation and Development (OECD)/Nuclear Energy Agency's (NEA's) Committee on the Safety of Nuclear Installations (CSNI). Motivation for the project was derived from recognition by the CSNI-PWG/3 that inconsistencies were being revealed in predictive capabilities of a variety of fracture assessment methods, especially in ductile fracture applications. As a consequence, the CSNI/FAG was formed to evaluate fracture prediction capabilities currently used in safety assessments of nuclear components. Members are from laboratories and research organizations in Western Europe, Japan, and the United States of America (USA). On behalf of the CSNI/FAG, the US Nuclear Regulatory Commission's (NRC's) Heavy-Section Steel Technology (HSST) Program at the Oak Ridge National Laboratory (ORNL) and the Gesellschaft fuer Anlagen--und Reaktorsicherheit (GRS), Koeln, Federal Republic of Germany (FRG) had responsibility for organization arrangements related to Project FALSIRE. The group is chaired by H. Schulz from GRS, Koeln, FRG

  7. 48{sup th} Annual meeting on nuclear technology (AMNT 2017). Key topic / Outstanding know-how and sustainable innovations. Technical session: Reactor physics, thermo and fluid dynamics. Neutron flux oscillations phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Herb, Joachim [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Abt. Kuehlkreislauf

    2018-01-15

    The Technical Session about Neutron Flux Oscillation Phenomena was chaired by Joachim Herb (Gesellschaft fuer Anlagen und Reaktorsicherheit (GRS) GmbH) and well attended by approx. 50 listeners. It comprised of three keynotes and two technical presentations. The main topics were the significant changes of the neutron flux noise levels in different German and foreign pressurized water reactors (PWRs). For about ten years an increase in neutron noise levels has been observed in German PWRs. During the following five years the noise levels have been decreasing again. In principle, a correlation of the neutron noise levels to the use of certain fuel element types was observed and the phenomenon of neutron flux oscillations had been known since decades. Nevertheless, no self-consistent physical theory exists so far, which can explain the observed changes and the absolute levels of the observed neutron flux noise levels. Therefore, safety authorities, technical support organizations (TSO), utilities as well as research organizations showed increased interest in this topic during the last years. The results of the corresponding work as well as an outlook into soon-starting research projects were given in this session.

  8. Purification of industrial effluents with a high load of organic pollutants by a combined anaerobic/aerobic process; Reinigung organisch hochbelasteter Industriebwaesser durch eine anaerob/aerobe Verfahrenskombination

    Energy Technology Data Exchange (ETDEWEB)

    Reidl, H.H. [AEW ESMIL GmbH fuer Wasser- und Abwassersyteme, Ratingen (Germany)

    1994-12-31

    Organically polluted sewage water can be economically cleaned in an aerobic biological sewage treatment plant with upstream anaerobic as this saves activation volume and ventilation energy. This was demonstrated in the sewage treatment plant of the PWA in Redenfelden, where an anaerobic stage was installed which uses the BIOTHANE{sup R} process. The CARROUSEL-system of the anaerobic stage has proved a istself both in the PWA ans in municipal plants between 5000 to 100000 EW. It is a robust system with uncomplicated control which guarantees observance of maximum values and allows elimation of P and N. (orig.) [Deutsch] Organisch hochbelastete Abwaesser werden oekonomisch durch eine aerobe biologische Klaeranlage mit vorgeschalteter Anaerobie gereinigt, weil dadurch Belebungsvolumen und Belueftungsenergie eingespart werden. Dies wurde am Beispiel der Abwasserreinigungsanlage der PWA Redenfelden gezeigt, bie der eine Anaerobstufe nach den BIOTHANE{sup R}-Verfahren installiert ist. Das dort eingesetzte CARROUSEL-System fuer die Aerobstufe hat sich sowohl bei der PWA als auch im kommunalen Bereich bei Anlagen zwischen 5000 und 100000 EW, als robustes System mit unkomplizierter Steuerung bewaehrt, das eine sichere Einhaltung der Grenzwerte garantiert und die Moeglichkeit zur P- und N-Elimination bietet. (orig.)

  9. Operational experience - Lessons learned from IRS-reports in Germany

    International Nuclear Information System (INIS)

    Wetzel, N.; Maqua, M.

    2005-01-01

    The international Incident Reporting System (IRS), jointly operated by IAEA and OECD-NEA, is a main source of safety significant findings and lessons learned of nuclear operating experience. GRS (Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH) is a scientific-technical expert and research organisation. On Behalf of the Federal Minister of Environment, Nature Conservation and Reactor Safety (BMU), GRS provides the IRS officer. The evaluation of IRS-Reports and the dissemination of the main findings including the assessment of the relevance for German NPPs is task of GRS. The value of IRS is among experts undoubted. But nevertheless, the reporting to IRS decreases since some years. This presentation is aimed to show the support of IRS in strengthening the safety of German NPPs. The evaluation of IRS-Reports at GRS is three-fold. It comprises initial screening, quarterly and yearly reporting and the development of specific German Information Notices on safety significant events with direct applicability to German NPPs. Some examples of lessons learned from recent international events are discussed below. These examples shall demonstrate that the use of the IRS enhances significantly the knowledge on operational events. (author)

  10. Utilizing offshore potentials for wind power generation; Nutzung der Offshore-Potentiale fuer die Windenergie

    Energy Technology Data Exchange (ETDEWEB)

    Hannemann, H. [Neptun Industrie GmbH, Rostock (Germany)

    2000-07-01

    The contribution discusses the importance of the offshore market and recommends measures to develop it. A turnkey offer is required for exports, which means that all organisations cooperating in the pilot project must prove their competence. The status of a pilot project in the Baltic Sea and the further plans for the park (20 systems, 40 MW, more than 10 km off the coast, water depth about 20 m) are reviewed. [German] Zur Erschliessung des Offshore - Marktes fuer Windenergieanlagen ist es erforderlich, die Technologie ''vor der eigenen Haustuer'' demonstrieren zu koennen. Nach einer Betrachtung der europaeischen Offshore - Windenergie - Potentiale und der davon moeglicherweise nutzbaren Anteile wird die Bedeutung des Offshore - Marktes deutlich. Besonders fuer die Hersteller ist der Offshore - Markt fuer den langfristigen Export von besonderer Bedeutung. Um den Export zu realisieren, ist ein Turnkey - Angebot erforderlich, so dass im Pilotprojekt alle an der gesamten Realisation beteiligten Organisationen ihre Kompetenz beweisen muessen und koennen. Der Stand eines Pilotprojektes in der Ostsee und die weitere Planung fuer den Park (20 Anlagen, 40 MW, >10 km Kuestenentfernung, ca. 20 m Wassertiefe) wird dargestellt. (orig.)

  11. Lean structures in networked systems; Schlanke Strukturen in vernetzten Systemen

    Energy Technology Data Exchange (ETDEWEB)

    Beisler, L. [DB Cargo AG, Mainz (Germany)

    2003-07-01

    In the coming 10 to 20 years, there will be a drastic increase in the number of freight transports in Europe. Transport politicians/scientists and the railways reckon that the volume of transport will double in Germany, which is tied particularly closely into the exchange of goods in Europe because of its central location. Deutsche Bahn is gearing up to the situation and is modernising lines and facilities. Lean production systems will ensure that the advantages of the tightly networked rail system are put to their full economic use. New products and sector-related solutions in combination with a quality campaign will provide a high degree of impetus in the European transport market. (orig.) [German] In den naechsten 10 bis 20 Jahren steigen die Guetertransporte in Europa drastisch an. Verkehrspolitik und -wissenschaft und die Bahnen erwarten fuer Deutschland, das durch seine Mittellage besonders stark in den europaeischen Gueteraustausch eingebunden ist, eine Verdoppelung der Verkehrsleistung. Die Bahn stellt sich darauf ein und modernisiert Strecken und Anlagen. Mit schlanken Produktionssystemen werden die Vorteile des stark vernetzten Schienensystems wirtschaftlich genutzt. Neue Produkte und Branchenloesungen in Verbindung mit einer Qualitaetsoffensive setzen starke Impulse im europaeischen Transportmarkt. (orig.)

  12. WTT. Current trends in fermentation technology; WTT. Aktuelle Entwicklungen im Bereich der Vergaerungstechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Stelwagen, Cornelis [WTT B.V., Almelo (Netherlands)

    2012-11-01

    WTT has substantial know-how in the design and construction of plants for biological and mechanical treatment of waste. In the past few years, fermentation was a key issue. In 2011, the WTT dry fermentation plant in Wiefels ws commissioned, which is described in this contribution. The plant is for treating the fine fraction of biological residues; it is an extension of the former biological treatment plant and a further optimisation of the overall concept. The experience gained, the performance so far, and the integration advantages are presented in brief. (orig.) [German] Durch die Errichtung und Ausstattung zahlreicher Anlagen zur biologischen und mechanischen Behandlung von Abfaellen besitzt WTT substanzielles Know-how auf dem Markt. In den letzten Jahren hat WTT viel Erfahrung in dem Bereich Vergaerung gewonnen. 2011 wurde die WTT-Trockenvergaerungsanlage in Wiefels in Betrieb genommen. Im Rahmen des Vortrags wird die Referenzanlage in Wiefels vorgestellt. In dieser Anlage wird die organische Feinfraktion des Restabfalls behandelt. Diese Anlage stellt eine Erweiterung der vorhandenen biologischen Aufbereitung und eine weitere Optimierung des Gesamtkonzeptes der MBA dar. Unsere Erfahrungen und Erkenntnisse sowie die Integrationsvorteile werden kurz vorgestellt. (orig.)

  13. Reports on research projects in the field of reactor safety sponsored by the Federal Ministry for Education, Science, Research and Technology. Period covered: January 1 - June 30, 1997

    International Nuclear Information System (INIS)

    1997-01-01

    Within the framework of its research programme on reactor safety, the Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technology (BMBF) (Federal Ministry for Education, Science, Research and Technology) sponsors investigations into the safety of nuclear reactors. These investigations that are carried out within the framework of the programme are to provide fundamental knowledge, procedures and methods contributing to realistic safety assessments of nuclear facilities, the further development of safety technology, and the use of the potential of innovative safety-related approaches. Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) bmH, by order of the BMBF, continuously issues information on the status of such investigations by publishing semiannual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. (orig./SR) [de

  14. Application of ASTEC, MELCOR, and MAAP Computer Codes for Thermal Hydraulic Analysis of a PWR Containment Equipped with the PCFV and PAR Systems

    Directory of Open Access Journals (Sweden)

    Siniša Šadek

    2017-01-01

    Full Text Available The integrity of the containment will be challenged during a severe accident due to pressurization caused by the accumulation of steam and other gases and possible ignition of hydrogen and carbon monoxide. Installation of a passive filtered venting system and passive autocatalytic recombiners allows control of the pressure, radioactive releases, and concentration of flammable gases. Thermal hydraulic analysis of the containment equipped with dedicated passive safety systems after a hypothetical station blackout event is performed for a two-loop pressurized water reactor NPP with three integral severe accident codes: ASTEC, MELCOR, and MAAP. MELCOR and MAAP are two major US codes for severe accident analyses, and the ASTEC code is the European code, joint property of Institut de Radioprotection et de Sûreté Nucléaire (IRSN, France and Gesellschaft für Anlagen und Reaktorsicherheit (GRS, Germany. Codes’ overall characteristics, physics models, and the analysis results are compared herein. Despite considerable differences between the codes’ modelling features, the general trends of the NPP behaviour are found to be similar, although discrepancies related to simulation of the processes in the containment cavity are also observed and discussed in the paper.

  15. ASTEC validation on PANDA SETH

    International Nuclear Information System (INIS)

    Bentaib, A.; Bleyer, A.

    2011-01-01

    The ASTEC code (jointly developed by IRSN and GRS, i.e. Gesellschaft fur Anlagen- und Reaktorsicherheit mbH) development is aimed to provide an integral code for the simulation of the whole course of severe accidents in Light-Water Reactors. ASTEC is a complex system of codes for reactor safety assessment. In this benchmark, only the CPA (Containment Part of ASTEC) module is used. CPA is a lumped-parameter able to represent a multi-compartments containment. It used the following main elements: zones (compartments), junctions (liquids and atmospherics) and structures. The zones are connected by junctions and contain steam, water and non condensable gases. They exchange heat with structures by different heat transfer regimes: convection, radiation and condensation. In this paper, three selected from the PANDA SETH Benchmark 9, 9bis and 25 are considered to investigate the impact of injection velocity and steam condensation on the plume shape and on gas distribution. Coarse and fine meshes were developed by considering the test facility with the two vessels DW1, DW2, and the interconnection pipe. The obtained numerical results are analyzed and compared to the experiments. The comparison shows the good agreement between experiments and calculations. (author)

  16. Control of nitrification and denitrification by means of oxygen measurement in activated sludge; Steuerung der Nitrifikation und Denitrifikation mittels Sauerstoffmessung im Belebungsbecken

    Energy Technology Data Exchange (ETDEWEB)

    Svardal, K; Kroiss, H

    1998-12-31

    As the simulation results show, controlling nitrification/denitrification by means of the oxygen content is a very effective method. Its big advantage is that the concentration of O{sub 2} can be very reliably measured. In comparison with online analysis units, O{sub 2} probes demand little maintenance and are inexpensive; so, each measuring point can be supplied with its own probe. O{sub 2} measurement is indispensable also with other control strategies. It would make sense, at least at larger plants, to monitor additionally the concentration of ammonium, a parameter which makes for a higher safety margin. (orig./SR) [Deutsch] Die Simulationsergebnisse zeigen, dass die Steuerung der Nitrifikation/Denitrifikation nach dem Sauerstoffgehalt sehr gute Resultate ergibt. Der grosse Vorteil dieser Art der Steuerung besteht darin, dass die O{sub 2}-Konzentration sich sehr zuverlaessig messen laesst. O{sub 2}-Sonden sind im Vergleich zu online-Analysatoren wartungsarm und preisguenstig, so dass auch eine reduntante Ausfuehrung jeder Messstelle vertretbar ist. Auf die O{sub 2}-Messung kann auch bei anderen Steuerstrategien nicht verzichtet werden. Eine sinnvolle Ergaenzung waere zumindest bei groesseren Anlagen eine Ueberwachung der Ammoniumkonzentration wobei dieser Messwert vor allen Dingen der Sicherheit dient. (orig./SR)

  17. Control of a reactor for conditioning of biogenic waste materials. Final report; Steuerung eines Reaktors zur Aufbereitung von Abfaellen mit biogenen Bestandteilen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bartha, B.; Brummack, J.; Kloeden, W.

    2002-10-01

    Mechanical-biological waste treatment implies biological drying and mechanical separation; it produces a pollutant-free fuel fraction with good calorific value and inorganic fractions available for recycling. Apart from some prototypes, mostly static aerobic reactors are used. For moist residues, dynamic reactors may be interesting as they permit coupling of thermal and mechanical processes, i.e. parallel biological drying and mechanical separation. A discontinuous rotary kiln reactor for biological drying of residues was developed in this project. (orig.) [German] Die mechanisch-biologische Aufbereitung von Restabfaellen (MBA) hat sich zu einem Systembaustein innerhalb der Restabfallentsorgung entwickelt. Das Hauptanwendungsziel besteht darin, durch die Kombination von biologischer Trocknung mit mechanischen Stofftrennverfahren eine heizwertreiche und schadstoffentfrachtete Fraktion mit Brennstoffeigenschaften, sowie verwertbare anorganische Fraktionen aus dem Restabfall zu gewinnen. Die Ausgangssituation zeigte, dass, abgesehen von einigen prototypischen Anlagen, in der MBA-Technologie hauptsaechlich statische, aerob arbeitende Reaktoren (Rottetunnel und Rotteboxen) fuer den biologischen Schritt eingesetzt werden. Fuer feuchte Restabfaelle erscheint es interessant, dynamische Reaktoren einzusetzen, die die Kopplung thermischer und mechanischer Prozesse erlauben, die also die biologische Trocknung und den mechanischen Aufschluss parallel zulassen. Im Rahmen des Projektes wurde die Steuerung eines diskontinuierlich betriebenen Drehrohrreaktors zur biologischen Trocknung von Restabfaellen entwickelt. (orig.)

  18. Introducing a dimensioning and simulation model useful for engineering practice for the modelling/optimization of enhanced biological P elimination.; Vorstellung eines in der Ingenieurpraxis nutzbaren Bemessungs- und Simulationsmodelles zur Abbildung/Optimierung der vermehrten biologischen P-Elimination

    Energy Technology Data Exchange (ETDEWEB)

    Wichern, M.; Rosenwinkel, K.H.; Binder, M.

    1999-07-01

    The paper describes in excerpts a stationary model, suitable for engineering practice, for assessing the efficiency of enhanced biological P elimination. Adapted to the latest state of knowledge and based on only a few measuring data, it can be used to dimension or optimize existing plant. It takes into account knowledge such as the following: growth of organisms with enhanced phosphorus accumulation (PAOs) in an anoxic environment, modelling of biomass die-back in an anaerobic environment, different yield and die-back rates of PAOs and non-bioP organisms, the share of denitrifying PAOs and degradation processes through hydrolysis/fermentation. (orig.) [German] Im Rahmen dieses Beitrages wird ein in der Ingenieurpraxis anwendbares stationaeres Modell zur Abschaetzung der Leistungsfaehigkeit der vermehrten biologischen P-Elimination in Auszuegen vorgestellt, das, angepasst an neueste Erkenntnisse, auf Basis weniger Messdaten zur Bemessung sowie Optimierung von bestehenden Anlagen eingesetzt werden kann. Erkenntnisse, wie z.B. das Wachsen der vermehrt phosphorspeichernden Organismen (PAO) im Anoxischen, die Abbildung des Biomassensterbens im Anaeroben, die unterschiedlichen Ertrags- und Sterberaten von PAOs und Nicht-BioP-Organismen, der Anteil der denitrifizierenden PAOs und Abbauprozesse durch Hydrolyse/Fermentation sind im Modell beruecksichtigt. (orig.)

  19. Scientific codes developed and used at GRS. Nuclear simulation chain

    Energy Technology Data Exchange (ETDEWEB)

    Schaffrath, Andreas; Sonnenkalb, Martin; Sievers, Juergen; Luther, Wolfgang; Velkov, Kiril [Gesellschaft fuer Anlagen und Reaktorsicherheit (GRS) gGmbH, Garching/Muenchen (Germany). Forschungszentrum

    2016-05-15

    Over 60 technical experts of the reactor safety research division of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH are developing and validating reliable methods and computer codes - summarized under the term nuclear simulation chain - for the safety-related assessment for all types of nuclear power plants (NPP) and other nuclear facilities considering the current state of science and technology. This nuclear simulation chain has to be able to simulate and assess all relevant physical processes and phenomena for all operating states and (severe) accidents. In the present contribution, the nuclear simulation chain developed and applied by GRS as well as selected examples of its application are presented. The latter demonstrate impressively the width of its scope and its performance. The GRS codes can be passed on request to other (national as well as international) organizations. This contributes to a worldwide increase of the nuclear safety standards. The code transfer is especially important for developing and emerging countries lacking the financial means and/or the necessary know-how for this purpose. At the end of this contribution, the respective course of action is described.

  20. Pediatric elbow trauma: an orthopaedic perspective on the importance of radiographic interpretation.

    Science.gov (United States)

    Jacoby, Sidney M; Herman, Martin J; Morrison, William B; Osterman, A Lee

    2007-03-01

    Radiographic interpretation of pediatric elbow trauma presents a daunting task for both the radiologist and treating orthopaedic surgeon. Proper radiographic diagnosis and appropriate intervention requires a thorough understanding and appreciation of developmental anatomy. As the pediatric elbow matures, it transitions from multiple cartilaginous anlagen through a predictable pattern of ossification and fusion. When children sustain trauma to the elbow, they may have a limited capacity to communicate specific complaints and are sometimes difficult to examine reliably. Furthermore, the presence of multiple growth centers, and their variability, makes radiographic evaluation of pediatric elbow injuries particularly challenging. These variables, coupled with the known adverse long-term sequelae of pediatric elbow trauma (painful nonunion, malunion, elbow stiffness, growth disturbance, etc.) highlight the importance of accurate radiographic interpretation, which facilitates appropriate treatment. By using an orderly, systematic approach based on well-defined anatomical relationships and accepted radiographic markers, the radiologist may effectively interpret and communicate pertinent findings to the treating orthopaedic surgeon. Furthermore, using common classification systems may facilitate interdisciplinary communication. Finally, it is crucial that caregivers of children consider the possibility of child abuse in suspect cases.

  1. Substitution of R502 in existing refrigerating, air-conditioning and heat pump systems with refrigerants of low ozone depletion potential in the Federal Republic of Germany; Ersatz von R 502 in bestehenden Kaelte-, Klima- und Waermepumpenanlagen in der Bundesrepublik Deutschland durch Kaeltemittel mit geringerem Ozonabbaupotential

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The technical basics and the state of engineering for the substitution of R502 in existing refrigeration systems are described and explained. The report contains an overview of the current applications of R502 in the FRG, the presentation and discussion of existing substitutes, the presentation and valuations of research and experiences with the adaptation to alternative refrigerants, the presentation of the required infrastructure and a discussion of the technical feasibility. The conversion of existing systems to refrigerants of lower ozone depletion potential is in conclusion valuated with regard to its technical feasibility, environmental relevance and economic efficiency. (orig.) [Deutsch] Es werden die technischen Grundlagen und der Stand der Technik zum Ersatz von R502 in bestehenden Kaelteanlagen dargestellt und erlaeutert. Der Bericht beinhaltet einen Ueberblick ueber die derzeitige Anwendung von R502 in der BRD, die Vorstellung und Diskussion existierender Ersatzstoffe, die Darstellung und Bewertung der Forschung und Erfahrungen zu Umruestungen auf Ersatzstoffe, die Vorstellung der erforderlichen Infrastruktur und die Diskussion der technischen Durchfuehrbarkeit. Die Umstellung bestehender Anlagen auf Kaeltemittel mit geringerem Ozonabbaupotential wird abschliessend hinsichtlich der technischen Durchfuehrbarkeit, der Umweltrelevanz und der Wirtschaftlichkeit bewertet. (orig.)

  2. Power to gas to relieve the electricity distribution networks. Continuation of the study ''Benefit of smart grid concepts taking into account the PtG technology''; Power-to-Gas zur Entlastung der Stromverteilungsnetze. Fortsetzung der Studie ''Nutzen von Smart-Grid-Konzepten unter Beruecksichtigung der PtG-Technologie''

    Energy Technology Data Exchange (ETDEWEB)

    Huettenrauch, Jens; Zoellner, Sylvana; Mueller-Syring, Gert [DBI Gastechnologisches Institut gGmbH, Freiberg (Germany); and others

    2015-07-01

    One of the main challenges in the energy transition is to integrate the increasing based on volatile renewable energy generated power in market and network. Based on actual distribution networks in Emsland in the study presented below was investigated, what contribution an intelligent coupling of electricity and gas distribution networks by means of power to gas (PtG) systems can do to solve this challenge. The investigations have shown, among other things, that the network expansion costs in particular can be significantly reduced by the coupling when otherwise an oversizing would be done by discrete power grid expansion measures. [German] Eine der wesentlichen Herausforderung bei der Energiewende besteht darin, die zunehmend auf volatilen erneuerbaren Energien basierende Stromerzeugung in Markt und Netz zu integrieren. Anhand realer Verteilungsnetze im Emsland wurde in der im Folgenden vorgestellten Studie untersucht, welchen Beitrag eine intelligente Kopplung von Strom- und Gasverteilungsnetzen mittels Power-to-Gas (PtG)-Anlagen zur Loesung dieser Herausforderung leisten kann. Die Untersuchungen haben unter anderem gezeigt, dass durch die Kopplung die Netzausbaukosten insbesondere dann signifikant reduziert werden koennen, wenn andernfalls eine Ueberdimensionierung durch diskrete Stromnetzausbaumassnahmen erfolgen wuerde.

  3. Plataforma Solar de Almeria. Annual report 1997-1998. Final report; Plataforma Solar de Almeria. Haushaltsjahre 1997-1998. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-01

    The performance and yields of thes following units and components are described: (a) Tower focus power plants and their components (TSA; RAS; Large Heliostat technology Program; Volumetric Receivers; REFOS); (b) Solar trough power stations and their components (DISS - Direct solar evaporation; ARDISS/PAREX test facility; EUROTROUGH - development of a cost-optimized European parabolic trough collector); (c) Solar chemistry (photocatalytic detoxification; solar synthesis of fine chemicals); (d) Dish/Stirling systems (HYHPIRE); (e) AP solar thermal technology transfer in the Mediterranean (THESEUS 50 MW{sub el} THErmal Solar European Power Statio at Frangokastello, Crete; SolWin; World-wide market introduction of solar thermal power stations). [German] Der bisher erzielter Erfolg und seine Auswirkungen wird fuer die folgenden Anlagen und Komponenten beschrieben. Diese sind: (a) Turmkraftwerke und deren Komponenten (TSA; RAS; Large Heliostat Technology Program; Volumetrische Receiver; REFOS), (b) Rinnenkraftwerke und deren Komponenten (DISS - Solare Direktverdampfung; ARDISS/PAREX Versuchsanlage; EUROTROUGH - Entwicklung eines kostenoptimierten europaeischen Parabolrinnenkollektors), (c) Solare Chemie (Photokatalytische Detoxifikation; Solare Synthese von Feinchemikalien), (d) Dish/Stirling Systeme (HYHPIRE), (e) AP Solarthermischer Technologietransfer im Mittelmeerraum (THESEUS - 50 MW{sub el} THErmal Solar European Power Station in Frangokastello, Kreta; SolWin; Weltweite Markteinfuehrung solarthermischer Kraftwerkstechnologie). (orig./AKF)

  4. Control of nitrification and denitrification by means of oxygen measurement in activated sludge; Steuerung der Nitrifikation und Denitrifikation mittels Sauerstoffmessung im Belebungsbecken

    Energy Technology Data Exchange (ETDEWEB)

    Svardal, K.; Kroiss, H.

    1997-12-31

    As the simulation results show, controlling nitrification/denitrification by means of the oxygen content is a very effective method. Its big advantage is that the concentration of O{sub 2} can be very reliably measured. In comparison with online analysis units, O{sub 2} probes demand little maintenance and are inexpensive; so, each measuring point can be supplied with its own probe. O{sub 2} measurement is indispensable also with other control strategies. It would make sense, at least at larger plants, to monitor additionally the concentration of ammonium, a parameter which makes for a higher safety margin. (orig./SR) [Deutsch] Die Simulationsergebnisse zeigen, dass die Steuerung der Nitrifikation/Denitrifikation nach dem Sauerstoffgehalt sehr gute Resultate ergibt. Der grosse Vorteil dieser Art der Steuerung besteht darin, dass die O{sub 2}-Konzentration sich sehr zuverlaessig messen laesst. O{sub 2}-Sonden sind im Vergleich zu online-Analysatoren wartungsarm und preisguenstig, so dass auch eine reduntante Ausfuehrung jeder Messstelle vertretbar ist. Auf die O{sub 2}-Messung kann auch bei anderen Steuerstrategien nicht verzichtet werden. Eine sinnvolle Ergaenzung waere zumindest bei groesseren Anlagen eine Ueberwachung der Ammoniumkonzentration wobei dieser Messwert vor allen Dingen der Sicherheit dient. (orig./SR)

  5. Possibilities under the `Kreislaufwirtschaft- und Abfallgesetz` for the recycling or for energy generation from waste with a high calorific value having undergone mechanical-biological conditioning; Moeglichkeiten der energetischen und stofflichen Verwertung von heizwertreichen Reststoffen aus der mechanisch-biologischen Restabfallbehandlung im Rahmen des Kreislaufwirtschafts- und Abfallgesetzes

    Energy Technology Data Exchange (ETDEWEB)

    Franke, J.; Fricke, K. [Ingenieurgemeinschaft Witzenhausen Fricke und Turk GmbH, Witzenhausen (Germany)

    1998-12-31

    This (partial) project has the following aims: to describe comprehensively the possibilities for the recycling, or generation of energy from, waste with a high calorific value having undergone mechanical-biological conditioning; further, to formulate demands regarding the quality of the separated partial fractions. This basic study takes all relevant, commercial thermal processes into account (power plants, cement works, blast furnaces, etc.). Furthermore, the question is investigated of whether the thermal waste processing plants in the area of the Suedhessische Arbeitsgemeinschaft Abfall (SAGA) are suitable for waste utilization. An environmental compatibility statement is made, and the economic and legal boundary conditions are studied. (orig.) [Deutsch] Ziel des (Teil-)Forschungsvorhabens soll es sein, die Moeglichkeiten der energetischen und stofflichen Verwertung heizwertreicher Abfaelle aus der mechanisch-biologischen Restabfallbehandlung umfassend darzustellen und die Anforderungen an die Qualitaet der abgretrennten Teilfraktionen zu formulieren. Bei der Grundlagenermittlung sollen alle relevanten auf dem Markt angebotenen thermischen Verfahren (Kraftwerke, Zementwerke, Hochoefen usw.) mit einbezogen werden. Weiterhin sollen die im SAGA-Gebiet (Suedhessische Arbeitsgemeinschaft Abfall) vorhandenen thermsichen Anlagen auf ihre Eignung zur energetischen bzw. stofflichen Verwertung hin ueberprueft werden. Neben der Bewertung der Umweltvertraeglichkeit werden die oekonomischen und rechtlichen Rahmenbedingungen untersucht. (orig.)

  6. A case of annular pancreas with Wirsung's duct encircling the duodenum: embryological hypothesis based on cholangiopancreatographic and immunohistochemical findings.

    Science.gov (United States)

    Fukai, Manami; Kamisawa, Terumi; Horiguchi, Shin-Ichirou; Hishima, Tsunekazu; Kuruma, Sawako; Chiba, Kazuro; Koizumi, Satomi; Tabata, Taku; Nagao, Sayaka; Kikuyama, Masataka; Honda, Goro; Kurata, Masanao

    2017-06-01

    We present a resected case of annular pancreas in which Wirsung's duct encircled the duodenum and continued directly to the main pancreatic duct in the body and tail. Furthermore, Wirsung's duct coursed along the right side of the lower bile duct near the major duodenal papilla. Histologically, the islets of Langerhans in the annular pancreas were irregular in shape and were characterized by a striking abundance of pancreatic polypeptide (PP)-positive cells. The PP-rich area that encircled the duodenum was fused with the PP-poor area in the head of the pancreas. The following embryological hypothesis is proposed. The tip of the ventral pancreatic anlage adhered to the duodenal wall and stretched to form a ring during clockwise rotation. The rotation was incomplete, and the pancreatic duct did not cross over the lower bile duct. Since there was adequate ventral anlage in the lower part of the head of the pancreas, fusion between the ducts of the ventral and dorsal anlagen did not occur. The tip of the ventral anlage overgrew and adhered to the dorsal anlage, and the annular duct fused with the main duct of the dorsal anlage.

  7. CSNI Project for Fracture Analyses of Large-Scale International Reference Experiments (Project FALSIRE)

    Energy Technology Data Exchange (ETDEWEB)

    Bass, B.R.; Pugh, C.E.; Keeney-Walker, J. [Oak Ridge National Lab., TN (United States); Schulz, H.; Sievers, J. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Gemany)

    1993-06-01

    This report summarizes the recently completed Phase I of the Project for Fracture Analysis of Large-Scale International Reference Experiments (Project FALSIRE). Project FALSIRE was created by the Fracture Assessment Group (FAG) of Principal Working Group No. 3 (PWG/3) of the Organization for Economic Cooperation and Development (OECD)/Nuclear Energy Agency`s (NEA`s) Committee on the Safety of Nuclear Installations (CSNI). Motivation for the project was derived from recognition by the CSNI-PWG/3 that inconsistencies were being revealed in predictive capabilities of a variety of fracture assessment methods, especially in ductile fracture applications. As a consequence, the CSNI/FAG was formed to evaluate fracture prediction capabilities currently used in safety assessments of nuclear components. Members are from laboratories and research organizations in Western Europe, Japan, and the United States of America (USA). On behalf of the CSNI/FAG, the US Nuclear Regulatory Commission`s (NRC`s) Heavy-Section Steel Technology (HSST) Program at the Oak Ridge National Laboratory (ORNL) and the Gesellschaft fuer Anlagen--und Reaktorsicherheit (GRS), Koeln, Federal Republic of Germany (FRG) had responsibility for organization arrangements related to Project FALSIRE. The group is chaired by H. Schulz from GRS, Koeln, FRG.

  8. Explosion protection of electric components of power supply and control systems. Explosionsschutz in der Elektrotechnik fuer energie- und leittechnische Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Fleck, K

    1983-01-01

    Knowledge on the physical and chemical processes of an explosion, on sources of ignition and measures to prevent explosive atmospheres and to deactivate sources of ignition may help to detect and prevent hazards. Safety measures for production and use of explosive materials are specified in DIN EN 50015-20/VDE 0170/0171 parts 2-7/5.78. Electric systems in explosive areas are specified in the Ordinance on Electric Systems in Explosive treas (Elex V), with pertinent administrative regulations. Ordinances, regulations and rules governing the operation of electric systems in explosive areas are listed.

  9. Behavior of a cycle-integrated system. Heat recovery in RTL plants; Verhalten von Kreislauf-Verbund-Systemen. Waermerueckgewinnung in RLT-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Rauser, Hanns Christoph [HCR Consulting, Ingenieurbuero fuer Kaelte- und Klimatechnik, Bietigheim-Bissingen (Germany)

    2010-09-15

    The contribution under consideration reports on the behaviour of a cycle-integrated system and derives criteria for the attaining high degrees of temperature changes. Since cycle-integrated system also realizes a reheating and a re-cooling apart from a heat recovery, also the behaviour of such a system is presented according to feeding coldness and warmth into the cycle.

  10. Ecological aspects to the use of pretreated waste in thermal plants; Oekologische Aspekte beim Einsatz aufbereiteter Abfaelle in thermischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Friedel, M.; Urban, A.I. [Kassel Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    1998-09-01

    The present contribution focuses on the input side of individual process techniques. It shows on the basis of example calculations how two parameters describing the incinerable (residual) waste that are of particular importance for unconventional thermal treatment methods, namely ``pollutant load`` and ``calorific value``, can be influenced by a recycling stage and then further by mechanical-biological pretreatment. [Deutsch] Im folgenden soll das Hauptaugenmerk auf die Inputseite zu den einzelnen thermischen Verfahren gelegt werden und anhand einer Beispielrechnung aufgezeigt werden, wie sich die fuer einen Einsatz in nichtkonventionellen thermischen Verfahren besonders wichtigen Parameter des aufbereiteten (Rest)Abfalls `Schadstoffbelastung` und `Heizwert` zunaechst durch eine Verwertung und weiter durch eine mechanisch-biologische Vorbehandlung veraendern. (orig./SR)

  11. Space hvac-systems need careful maintenance; Operators are responsible. Raumlufttechnische Anlagen beduerfen der sorgfaeltigen Wartung; Betreiber stehen in der Verantwortung

    Energy Technology Data Exchange (ETDEWEB)

    Mertz, G

    1992-01-01

    Regular expert maintenance of ventilation and air-conditioning systems is absolutely necessary among others to avoid health damages (Legionnaires' disease). In hospitals the risk of bacteria distribution is avoided by two or three-step filtration. In case of air-conditioning systems in non-medical areas supply air has to be filtered at least once. Moreover regular maintenance and control of the hygienic conditions of all systems is absolutely necessary. With ultraviolet disinfection in humidifying systems an effective disinfection at least of drinking water can be attained by keeping to certain limits. Filtering devices are also important for the removal of pollutants from air. (BWI)

  12. Practical implementation of a quality management system in a radiological department; Praktische Umsetzung von Qualitaetsmanagement in einer radiologischen Abteilung

    Energy Technology Data Exchange (ETDEWEB)

    Huber, S.; Zech, C.J. [Klinikum der Ludwig-Maximilians-Universitaet, Campus Innenstadt, Institut fuer Klinische Radiologie, Muenchen (Germany)

    2011-10-15

    This article describes the architecture of a project aiming to implement a DIN EN ISO 9001 quality management system in a radiological department. It is intended to be a practical guide to demonstrate each step of the project leading to certification of the system. In a planning phase resources for the implementation of the project have to be identified and a quality management (QM) group as core team has to be formed. In the first project phase all available documents have to be checked and compiled in the QM manual. Moreover all relevant processes of the department have to be described in so-called process descriptions. In a second step responsibilities for the project are identified. Customer and employee surveys have to be carried out and a nonconformity management system has to be implemented. In this phase internal audits are also needed to check the new QM system, which is finally tested in the external certification audit with reference to its conformity with the standards. (orig.) [German] Dieser Beitrag beschreibt die Grundarchitektur einer Projektplanung fuer die Etablierung eines Qualitaetsmanagement(QM)-Systems mit Zertifizierung nach DIN EN ISO 9001 fuer eine radiologische Abteilung basierend auf eigenen Erfahrungen und der einschlaegigen Praxis. Er soll ein praktischer Leitfaden fuer die einzelnen Arbeitsschritte waehrend eines solchen Zertifizierungsprojekts sein. In einer Planungsphase muessen die erforderlichen Ressourcen fuer ein Zertifizierungsprojekt erfasst und eine QM-Gruppe als Kernteam gebildet werden. In der ersten Projektphase werden die Dokumente und Vorlagen der Abteilung gesichtet und in einem Handbuch gelenkt. Zudem muessen fuer alle wesentlichen Prozesse Beschreibungen erstellt werden. In einer zweiten Projektphase werden weitere Verantwortlichkeiten im Rahmen eines Beauftragtenwesens festgelegt, Befragungen relevanter ''Kunden'' (Patienten, Zuweiser) und Mitarbeiter durchgefuehrt und ein Fehler- und

  13. Energy management systems in the practice. ISO 50001. A guideline for companies and institutions; Energiemanagementsysteme in der Praxis. ISO 50001. Leitfaden fuer Unternehmen und Organisationen

    Energy Technology Data Exchange (ETDEWEB)

    Kohlenborn, Walter; Kabisch, Sibylle; Klein, Johanna; Richter, Ina; Schuermann, Silas

    2012-06-15

    The guideline under consideration is an updated version of the guideline to the regulation EN 16001 and amended to ISO 50001. This contribution supports institutes in the implementation of an energy management system according to ISO 50001. The differences and commonalities to the European environment management system EMAS as well as to the regulation ISO 14001 are described. EMAS certified companies fulfil regularly all conditions of an energy management system. A practised energy management system is an excellent platform for the implementation of EMAS.

  14. Emergency medicine in case of disasters. Guideline for medical care in case of disasters. 4. rev. ed.; Katastrophenmedizin. Leitfaden fuer die aerztliche Versorgung im Katastrophenfall

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Medical care in case of disasters means being pressed for time, facing difficult structures and a shortage of resources while trying to attend to many injured at a time. The knowledge required must be immediately available, and this is where this book comes in handy. The guide addresses primarily doctors and medical staff. It answers medical questions, lists contacts, provides information on disaster management, and goes into legal and ethical aspects as well. (orig.)

  15. The photovoltaic planar antenna - high-tech with multifunctional utilisation of the physical properties of solar cells. Paper; Die photovoltaische Planarantenne - High-Tec durch multifunktionale Nutzung der physikalischen Eigenschaften von Solarzellen. Paper

    Energy Technology Data Exchange (ETDEWEB)

    Bendel, C.; Kirchhof, J.; Henze, N. [Institut fuer Solare Energieversorgungstechnik (ISET), Kassel (Germany)

    2001-07-01

    The use of the photovoltaic energy conversion for power supply has been practised successfully in communication technological facilities for years. Problems often arise regarding the optimal installation locations and orientations of the components Solar-Cell/-module and antenna, because they mutually visually or electromagnetically often disturb themselves. The partly very high direct costs also cause difficulties at the simultaneous use of both components. The vision arising at the ISET, was to use this unintentional effect of the parasitical irradiation as new multifunctional quality of solar cells. The ''Solar Planar Antenna'' could take both radio and energy supply functions of electric equipment or systems and make completely new equipment design and system concepts possible. After some finally promising tests the ''Solar Planar Antenna'' was applied as German, European, US-American and Japanese patent. The name SOLPLANT became a registered trademark. The ''Solar Planar Antenna'' shall be used in products where the simultaneous use of photovoltaic and Radio Frequency facilities are still incompatible. Some of the possible applications are compact measurement stations with RF-based communication, GPS-based navigation systems, communication base stations, antenna and battery charger at mobile telephone handsets, ''Bluetooth'' based computer devices and accessories like keyboards, trackballs or organisers. Together with a digital signal conditioning in combination with an array of ''Solar Planar Antennas'' a digital coil forming is possible. With this feature the antenna can be used as high gain antenna and it is possible to blind out noise and distortions. [German] Die Nutzung der photovoltaischen Energiewandlung zur Stromversorgung wird in kommunikationstechnischen Einrichtungen seit Jahren erfolgreich praktiziert. Probleme bereiten oft die optimalen Installationsstandorte und Ausrichtungen der Einzelkomponenten Solarzelle / -module und Antenne, weil sie sich oft gegenseitig optisch bzw. elektromagnetisch stoeren. Im ISET entstand die Vision, den ungewollten Effekt der parasitaeren Abstrahlung als neue multifunktionale Eigenschaft von Solarzellen bzw. -modulen zu nutzen. Im Gegensatz zu einfachen PV-Modulen zur Gleichstromgewinnung muss bei einer ''Solaren Planarantenne'' bei allen Leiterstrukturen das Hochfrequenzverhalten beruecksichtigt werden.

  16. Advantages for nitrocarburizing processes with post oxidation in continuous furnaces; Anlagen und verfahrenstechnische Vorteile beim Nitrocarburieren mit Nachoxydieren in kontinuierlichen Ofenanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Irretier, Olaf [Industrieberatung fuer Waermebehandlungstechnik IBW Dr. Irretier, Kleve (Germany); Salerno, David [Safed Suisse, Delemont (Switzerland)

    2011-06-15

    The present contribution shows the possibilities and test results of the new developed nitrocarburizing process called Oxycad NT {sup registered}. It could be shown, that this process is very suitable for bulk materials which have to be heat treated in conveyor belt furnaces for an optimum wear and corrosion resistance. (orig.)

  17. Desiccative and evaporative cooling systems in the field of energy change; Planung und Wirtschaftlichkeit von DEC-Anlagen im Umfeld der Energiewende

    Energy Technology Data Exchange (ETDEWEB)

    Mai, Ronny [ILK Dresden gGmbH, Dresden (Germany). Bereich Luft- und Klimatechnik

    2013-06-15

    Desiccative and evaporative cooling systems are established on the market since a few years. They are energy efficient, they can use renewable energy and replace conventional compression cooling systems. Their primary energy demand is up to one-third below the demand of conventional air conditioning systems. Nevertheless there is a big difference on the market. The sales have been stagnating for years, although the energy change requires efficient and sustainable technologies in this Article, the existing prejudices and their thrift are discussed. (orig.)

  18. Partial air conditioning in the production hall of VW-Mechatronics. Part 2; Teilklima-Anlagen in der Fertigungshalle VW-Mechatronic. Teil 2

    Energy Technology Data Exchange (ETDEWEB)

    Stroeder, R. [BKI Brab und Kahl Ingenieurgesellschaft mbH, Aachen (Germany)

    2005-07-01

    While part 1 presented the technical facilities for mechanical production and air filtering, part 2 describes the assembly section with the clean room and the space HVAC systems for testing, measuring, and auxiliary rooms. (orig.)

  19. More efficient resource utilization of geothermal plants. Technical possibilities and their assessment; Effizientere Ressourcenausnutzung geothermischer Anlagen. Technische Moeglichkeiten und deren Bewertung

    Energy Technology Data Exchange (ETDEWEB)

    Kock, Nils; Kaltschmitt, Martin [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Umwelttechnik und Energiewirtschaft

    2011-12-15

    The geological conditions in Germany allow maximum temperatures between 160 to 170 C free well head taking techno-economic constraint into consideration. This makes an electricity production for purely technical reasons possible, but only with low efficiencies due to physical constraints. That's why it assault big amounts of waste heat. For example, the existing geothermal power plants in Germany provide in average 18% of electricity and 82% of heat. This heat is use so far only to a very small degree. Even is a district heating system is operated to supply private households, this heat is used with less than 2.500 h per year. That's why the still hot thermal water is press back into the underground without any further utilization. For these reasons to achieve a technical and economic optimization it should be the aim to find different reasonable options to use this waste heat. One possibility is the coupling with a drying process at the location of the geothermal plant. Such options will be analyzed from a technical and economic point of view and some conclusions will be drawn. (orig.)

  20. Earthing - Lightning protection - Equipotential bonding. Involvement of photovoltaic power plants at buildings; Erdung - Blitzschutz - Potentialausgleich. Einbindung von Photovoltaik-Anlagen auf Gebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Hemmann, Bjoern; Mausser, Bettina

    2011-09-15

    There are large uncertainties and different views in the consideration of equipotential bonding, grounding and lightning protection for photovoltaic systems. With this in mind, the contribution under consideration reports on why, when and how photovoltaic systems at buildings must be grounded. The authors report on a grounding of photovoltaic systems from the perspective of the protective grounding, from the view of functional grounding, from the view of lightning protection and frame grounding. At best, the metal frame of a photovoltaic system always is connected with the main earth bar using 16 mm{sup 2} copper. At excessive discharge currents, the module frame must be grounded forever.

  1. Facility management - from internal conditioner to successful business sector; Facility Management - vom internen Fitmacher zum erfolgreichen Geschaeftsfeld

    Energy Technology Data Exchange (ETDEWEB)

    Schoenberg, I. [Mannheimer Versorgungs- und Verkehrsgesellschaft mbH (MVV), Mannheim (Germany)

    1999-04-01

    The deregulation of the energy markets has given rise to sustained motion in the prevailing structures and market conditions of the supply industry. Dramatic declines in profits in the electricity sector have, in many companies, prompted reflex-like cost reduction programs which, however, frequently prejudice long-term growth prospects and viable future structures in favour of the results of the next fiscal year. The danger of sacrificing all flexibility and therefore market perspectives by corporate anorexia nervosa is immense. The MVV Energie AG, Mannheim, has reacted speedily to this situation and is pursuing a growth-oriented strategy which regards the challenges of competition as opportunity for on-going development. (orig.) [Deutsch] Kapitaldienst oder Miete, Energie, Wartung und Instandsetzung technischer Anlagen, Gebaeudeunterhalt-, -reinigung, Sicherheitsdienste, Versicherungen und vieles mehr uebersteigen ueber Jahre hinweg kumuliert die Baukosten um ein vielfaches und erhoehen bei Immobilieneigentuemern und -nutzern den Kostendruck. Beim Facility Management (FM) stehen nicht mehr nur die Investitionskosten fuer ein Gebaeude im Vordergrund, sondern sein gesamter Lebenszyklus, beginnend mit Idee, Konzeption und Investitionsentscheidung ueber Planung und Errichtung. Nutzung inklusive spaeterer Umbauten und Sanierungen bis hin zu Abriss und Neubau. Mit ihrer Dienstleistung FM bietet die MVV Energie AG ihren Kunden Gesamtkonzeption von der Beratung ueber die Planung und Umsetzung bis hin zur Uebernahme des FM an. (orig.)

  2. Utilities` view about NDT-trends; Entwicklungstendenzen in der ZfP aus Betreibersicht

    Energy Technology Data Exchange (ETDEWEB)

    Hansch, M.K.T.; Broecker, B. [PreussenElektra AG (Germany)

    1999-08-01

    Nondestructive testing of nuclear plant components has become an increasingly important part in the performance of ISI activities. A change can be observed over recent years in ISI planning in that there is a trend towards placing more emphasis on component risk informed in-service inspection and online monitoring of components in response to operating history and conditions. Within the framework of the basic safety and in-service inspection concept, NDT and online monitoring of components are redundant, though important measures. This change of approach is a reaction to the advancements in the technical development of NDT methods and capabilities as well as related aspects, such as equipment and techniques for preparation, performance, and evaluation of inspections and subsequent data processing. (orig./CB) [Deutsch] Die zerstoerungsfreie Pruefung in den nuklearen Anlagen ist in den letzten Jahren immer mehr ins Rampenlicht getreten. Die betriebsbedingte Vorgehensweise bei der WKP ist im Rahmen der Betriebsueberwachung der Komponenten eine Tendenz zu einer kausalen wiederkehrenden Pruefung innerhalb des Basissicherheitskonzeptes, das die Betriebsueberwachung und die zerstoerungsfreie Pruefung als redundante Massnahmen involviert. Begleitet wird das o.g. Vorgehen von der technischen Entwicklung der zerstoerungsfreien Prueftechniken und deren Randgebiete, die die Vorbereitung, die Durchfuehrung, die Bewertung und die weitere Datenverwendung betreffen. (orig.)

  3. Official dosimetry with individual electronic dosemeters - the concept in Germany

    International Nuclear Information System (INIS)

    Czarwinski, R.; Kaulard, J.; Pfeffer, W.

    2005-01-01

    Full text: Presently, in Germany passive dosemeters (film batches, RPL, TLD) are used for the official individual monitoring of occupational exposed personal. The application of electronic individual dosemeters (EPD) is carried out mainly for the operative radiation protection control particularly in nuclear power engineering companies, big hospitals und research centres. This means in such institutions double monitoring exists - legally and operatively. A crucial advantage of EPD compared to passive dosemeter is the possibility to adapt the monitoring period to the working time in the control area, e.g. a job related monitoring is available. Germany started a project for an optimized implementation of EPD into the official dosimetry. Objective of the project whose results will be described in the paper is the harmonization of radiation protection of companies workers and outside workers concerning the record of individual and job related exposures. The approval of the EPD by the Federal and Laender authorities as an official dosimetric system demands the implementation of special requirements concerning the data acquisition, data transfer and data evaluation. These issues are focuses of the Federal research project, supervised by the Federal Office for Radiation Protection (BfS) and performed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS), Cologne to develop a concept in the first stage. (author)

  4. Device diagnosis in support of asset management. PROFIBUS responds to user demands for more simplified diagnosis; Mit Geraetediagnose zum Asset Management. PROFIBUS reagiert auf den Anwenderwunsch nach Straffung der Feldgeraetediagnose

    Energy Technology Data Exchange (ETDEWEB)

    Diedrich, C. [Institut fuer Automation und Kommunikation e.V., Barleben (Germany); Jecht, U. [UJ Prozessanalytik, Baden-Baden (Germany); Oestreich, V. [PROFIBUS Nutzerorganisation e.V., Karlsruhe (Germany); Rachut, H. [Siemens AG, Karlsruhe (Germany); Tepper, C.J. [Endress und Hauser Process Solutions AG, Reinach (Switzerland)

    2004-04-01

    Diagnosis information of intelligent field devices represents an important economic potential of fieldbus systems in the process industry. This issue is of high actuality and diversity: Manufacturers of field devices intend to implement more and more diagnosis functionalities, fieldbus organisations are trying to harmonize them, and users, based on experiences from many plants, request increasingly more simple and more unified information. PROFIBUS International has quickly responded on these concerns and presents a proposal for PROFIBUS PA, the PROFIBUS solution for Process Automation, how to reduce and focus the high amount of diagnosis information from field devices to an applicable extent. (orig.) [German] In verfahrenstechnischen Anlagen mit Feldbusinstallationen stellen die aus den Feldgeraeten erhaeltichen Informationen ein bedeutendes Nutzenpotenzial dar. Das Thema ist von hoher Dynamik und Vielfalt gepraegt. Die Hersteller ruesten ihre intelligenten Geraete mit immer mehr Funktionen zur Bereitstellung von Informationen fuer Diagnosezwecke aus, die Feldbusorganisationen bemuehen sich um deren herstelleruebergreifende Festlegung, und die Anwender formulieren auf Basis von Praxiserfahrungen ihre Wuensche nach mehr Einfachheit und Einheitlichkeit der 'Informationsflut'. Die PROFIBUS Nutzerorganisation e.V. hat dieser Situation Rechnung getragen und legt fuer die Diagnose bei Feldgeraeten der Prozesstechnik (PROFIBUS PA) einen Vorschlag zur Straffung und Anpassung an die Anwenderwuensche vor. (orig.)

  5. OECD/CSNI specialist meeting on nuclear aerosols in reactor safety - Summary and Conclusions

    International Nuclear Information System (INIS)

    Allelein, Hans-Josef; Boulaud, Denis; Guentay, Salih; Dehbi, Abdelouahab; Hontanon, Esther; Jokiniemi, Jorma; Jones, Alan V.; Koroll, Grant W.; Tinkler, Charles G.; Schaperow, J.; Royen, Jacques

    1999-01-01

    The Third OECD Specialist Meeting on Nuclear Aerosols in Reactor Safety was organised in Cologne, Germany, from 15-18 June 1998, in collaboration with the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH. It was attended by sixty-five specialists representing thirteen OECD Member countries and the Commission of the European Communities. Thirty-nine papers were presented, in eight sessions. The meeting was concluded by a general discussion devoted to the following topics: - What has been solved up to the level of plant applications and accident management? - Where is more work needed for plant applications? Over the last eight years significant progress has been made in source term modelling and code development. Results have been consolidated in codes which are being used for plant calculations to address safety issues. For example, two countries used their source term codes last year to assess the impact of heating from deposited fission products on the potential for steam generator tube rupture. Also, another source term code was used to assess the need of sprays for fission product removal in the proposed design of a new type of reactor. Over the next few years, experiments and model development will continue, with more emphasis on application to risk-important severe accident scenarios

  6. Combination of biological treatment of waste air and liquid effluents in small and medium-sized businesses by using spherical carrier media in exchange with each other. Final report; Kombination der biologischen Behandlung von Abluft- und Abwasserreinigung in kleinen und mittleren Unternehmen durch die Verwendung von kugeligen Traegermaterialien im gegenseitigen Austausch. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kunz, P.M.; Brunk, M.; Bentz, P.; Bach, K.; Marcos del Rio, O.; Stahl, B.; Wolf, C.

    2002-05-08

    A combined system for biological treatment of solvent-contaminated liquid and gaseous effluents was to be constructed. The system was to be mobile for demonstration purposes in industrial processes and was to serve for dimensioning of full-scale systems. The system works by a combined process via exchange of spherical carriers with a growth of micro-organisms. Two pilot systems of the Institut fuer Biologische Verfahrenstechnik, one for liquid and one for gaseous effluents, were combined for this purpose, ensuring exchange of carrier materials between the two units. (orig.) [German] Aufgabe im Rahmen dieses F+E-Vorhabens war es gewesen, eine kombinierte biologische Abluft- und Abwasserreinigungsanlage - speziell fuer loesungsmittelhaltige Abluft und Abwaesser - zu untersuchen. Dazu sollte eine Anlage aufgebaut werden, die auch als Demonstrations- und Versuchsanlage zu Industriebetrieben gebracht und dort zur Dimensionierung von full-scale-Anlage eingesetzt werden kann. Idee fuer dieses Vorhaben war gewesen, die Kombination beider Behandlungssysteme ueber den Austausch von mit Mikroorganismen bewachsenem Traegermaterial herzustellen. Am Institut fuer Biologische Verfahrenstechnik existierte bereits eine Pilotanlage fuer die biologische Abwasserreinigung mit kugeligem Traegermaterial (Vario-Bio-Reaktor) und eine Pilotanlage fuer die biologische Behandlung von Abluft nach dem Trickling-Filter-Prinzip mit ebenfalls kugeligem Traegermaterial. Diese beiden Anlagen sollten miteinander kombiniert und der Austausch des Traegermaterials hergestellt werden. (orig.)

  7. Annual report on Reactor Safety Research Projects sponsored by the Ministry of Economics and Technology of the Federal Republic of Germany. Reporting period 1999. Progress report

    International Nuclear Information System (INIS)

    2000-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technologie (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to the classification system ''Joint Safety Research Index'' of the CEC (commission of the European communities). The reports are arranged in sequence of their project numbers. (orig.)

  8. Mechatronics. Fundamentals and applications of technical systems. 2. upd. and enl. ed.; Mechatronik. Grundlagen und Anwendungen technischer Systeme

    Energy Technology Data Exchange (ETDEWEB)

    Czichos, Horst

    2008-07-01

    The book directs to college students and engineers in practice. Presentation of practical applications like e.g. CD-players, industry robots, automobile sensorics. THe actual edition was completed by medicinal engineering. The main topics are: fundamentals on data processing; technical communication; test engineering; quality management; materials engineering; mechanical systems; production of mechanical systems; fundamentals on electrical engineering; electric machines and devices; control systems; remote systems in automation engineering; mechatronic systems and their installation, commissioning and maintenance. (GL) [German] Dieses Fachbuch beschreibt mit aussagekraeftigen Abbildungen kurz und praegnant die Grundlagen und Anwendungen der Mechatronik: von der Makro- und Mikrotechnik bis hin zur Nanotechnik. Erstmalig wird durchgaengig eine ganzheitlich-systemtechnische Behandlung mechatronischer Systeme vorgenommen. Ein Schwerpunkt liegt in der Darstellung von Praxisanwendungen wie z. B. CD-Player, Industrieroboter, Automobilsensorik. Die aktuelle Auflage wurde um die Entwicklungsmethodik fuer mechatronische Systeme und ein neues Kapitel Medizintechnik ergaenzt. Ausserdem wurden die Grundlagen vertieft (z. B. Magneto- und Optoelektronik in der Mechatronik) sowie die Anzahl der Anwendungsbeispiele erweitert. Aus dem Inhalt Teil A Grundlagen: Uebersicht - Einfuehrung in die systemtechnische Methodik - Modellbildung mechatronischer Systeme - Regelung und Steuerung - Sensorik - Aktorik Teil B Anwendungen: Maschinenbau - Positionierungstechnik und Robotik - Produktionstechnik - Feinwerktechnik - Audio-Video-Technik - Computertechnik - Fahrzeugtechnik - Medizintechnik - Bauliche Anlagen. (orig.)

  9. Combining mechanical-biological residual waste treatment plants with the carbonisation-combustion process; Kombination MBA mit dem Schwel-Brenn-Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Diekmann, J.; Wiehn, G. [Siemens AG Unternehmensbereich KWU, Erlangen (Germany). Bereich Energieerzeugung

    1998-09-01

    The disposal market for household waste is strongly influenced by the legal framework governing it. A further factor that makes it difficult for the authorities responsible for disposal to decide on residual waste disposal by means of thermal or mechanical-biological treatment plants is the downward pressure on disposal prices from inexpensive, underused landfills. This makes it all the more important for a future-oriented waste management to develop a both economically and ecologically optimised waste disposal concept. In this situation there is much in favour of adopting a concept consisting of a combination of mechanical, mechanical-biological, and thermal treatment which takes due account of waste disposal concepts at the regional and supraregional scale. [Deutsch] Der Entsorgungsmarkt fuer Siedlungsabfaelle wird stark durch die Entwicklung der rechtlichen Rahmenbedingungen beeinflusst. Hinzu kommt, dass der Entscheidungsprozess der oeffentlichen Entsorgungstraeger zur Restabfallentsorgung mittels thermischer oder mechanisch-biologischer Anlagen durch den Druck auf die Entsorgungspreise aufgrund der kostenguenstigen, nicht ausgelasteten Deponien erschwert wird. Umso mehr muss das Ziel einer zukunftsorientierten Abfallwirtschaft sein, unter oekonomischen und oekologischen Gesichtspunkten ein optimiertes Abfallkonzept aufzubauen. Hier kann es sehr hilfreich sein, sich eines Konzeptes, bestehend aus der Kombination von mechanischer, mechanisch-biologischer und thermischer Behandlung unter Beruecksichtigung des regionalen und ueberregionalen Abfallkonzeptes zu bedienen. (orig./SR)

  10. Validation of CESAR Thermal-hydraulic Module of ASTEC V1.2 Code on BETHSY Experiments

    Science.gov (United States)

    Tregoures, Nicolas; Bandini, Giacomino; Foucher, Laurent; Fleurot, Joëlle; Meloni, Paride

    The ASTEC V1 system code is being jointly developed by the French Institut de Radioprotection et Sûreté Nucléaire (IRSN) and the German Gesellschaft für Anlagen und ReaktorSicherheit (GRS) to address severe accident sequences in a nuclear power plant. Thermal-hydraulics in primary and secondary system is addressed by the CESAR module. The aim of this paper is to present the validation of the CESAR module, from the ASTEC V1.2 version, on the basis of well instrumented and qualified integral experiments carried out in the BETHSY facility (CEA, France), which simulates a French 900 MWe PWR reactor. Three tests have been thoroughly investigated with CESAR: the loss of coolant 9.1b test (OECD ISP N° 27), the loss of feedwater 5.2e test, and the multiple steam generator tube rupture 4.3b test. In the present paper, the results of the code for the three analyzed tests are presented in comparison with the experimental data. The thermal-hydraulic behavior of the BETHSY facility during the transient phase is well reproduced by CESAR: the occurrence of major events and the time evolution of main thermal-hydraulic parameters of both primary and secondary circuits are well predicted.

  11. Severe accident analysis in a two-loop PWR nuclear power plant with the ASTEC code

    International Nuclear Information System (INIS)

    Sadek, Sinisa; Amizic, Milan; Grgic, Davor

    2013-01-01

    The ASTEC/V2.0 computer code was used to simulate a hypothetical severe accident sequence in the nuclear power plant Krsko, a 2-loop pressurized water reactor (PWR) plant. ASTEC is an integral code jointly developed by Institut de Radioprotection et de Surete Nucleaire (IRSN, France) and Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS, Germany) to assess nuclear power plant behaviour during a severe accident. The analysis was conducted in 2 steps. First, the steady state calculation was performed in order to confirm the applicability of the plant model and to obtain correct initial conditions for the accident analysis. The second step was the calculation of the station blackout accident with a leakage of the primary coolant through degraded reactor coolant pump seals, which was a small LOCA without makeup capability. Two scenarios were analyzed: one with and one without the auxiliary feedwater (AFW). The latter scenario, without the AFW, resulted in earlier core damage. In both cases, the accident ended with a core melt and a reactor pressure vessel failure with significant release of hydrogen. In addition, results of the ASTEC calculation were compared with results of the RELAP5/SCDAPSIM calculation for the same transient scenario. The results comparison showed a good agreement between predictions of those 2 codes. (orig.)

  12. Technical and economic practicability of novel flywheel mass storage systems in electricity supply networks; Technisch-wirtschaftliche Realisierbarkeit von neuartigen Schwungmassenspeicher-Systemen (SMSS) in elektrischen Netzen

    Energy Technology Data Exchange (ETDEWEB)

    Bornemann, H J; Baeumer, U; Kaiser, A; Gruener, A; Gutt, H J; Hampel, R; Heyder, B; Kleimaier, M; Radtke, U; Sachse, H; Schlechter, V; Schrepfer, W; Worlitz, F

    1998-12-31

    Efficient storage of electrical energy is an increasing need. New developments in high-power electronics, high-strength materials and magnetic bearings have made efficient reliable flywheel mass storage systems in the range of 1-5 MfW/50-150 kWh conceivable. According to a first assessment, these systems may provide energy to the supply grid in a range of seconds and thus ensure frequency maintenance and compensation of short interruptions. The authors present first results of a preliminary study preparatory to a feasibility study on the technical and economic practicability of flywheel mass storage systems. (orig.) [Deutsch] Das Thema effiziente Speicherung von elektrischer Energie gewinnt immer mehr an Bedeutung. Durch neuere Entwicklungen in der Leistungselektronik und bei der Herstellung hochfester Werkstoffe sowie durch Fortschritte bei der Entwicklung von beruehrungsfreien Lagern im Bereich der aktiven Magnetlager (AML) und insbesondere supraleitenden Magnetlager (SML) sind effiziente und sichere Schwungmassenspeicher-Systeme (SMSS) bis in die Bereiche 1-5 MW/50-150 kWh denkbar. Nach einer ersten Einschaetzung eignen sich solche Anlagen, um im Sekundenbereich Energie in das Netz abzugeben und somit zur Frequenzstuetzung und zur Kompensation von Kurzunterbrechungen beizutragen. Praesentiert werden erste Ergebnisse einer Untersuchung zur Vorbereitung einer Machbarkeitsstudie ueber die technisch-wirtschaftliche Realisierbarkeit von Schwungmassenspeicher-Systemen. (orig.)

  13. Control-technical optimization of topped denitrification through fuzzy control; Regelungstechnische Optimierung der vorgeschalteten Denitrifikation durch Anwendung von Fuzzy-Control

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, U. [Hydroplan Ingenieurgesellschaft, Worms (Germany); Poepel, H.J. [Technische Univ. Darmstadt (Germany). Inst. WAR - Wasserversorgung, Abwassertechnik, Abfalltechnik, Umwelt- und Raumplanung

    1999-07-01

    The present paper describes complex fuzzy systems for controlling nitrogen elimination at plants with topped denitrification. For the design and testing of the fuzzy systems, dynamic simulation calculations and experimental tests were carried out in a semi-technical pilot plant. The controlling fuzzy systems indicate the supposed oxygen values for individual tank areas and the most appropriate partitioning of the activated sludge tank (anoxic/aerobic zone) as a function of the input quantities used. It is established that, with the more flexible control behaviour, a more stable nitrogen elimination and, at the same time, a cut in the amount of air transferred to the system can be attained in comparison with a conventional control. (orig.) [German] Im Rahmen dieses Beitrags werden komplexe Fuzzy-Systeme zur Regelung der Stickstoffelimination in Anlagen mit vorgeschalteter Denitrifikation vorgestellt. Zum Entwurf und zur Erprobung der Fuzzy-Systeme wurden dynamische Simulationsrechnungen und experimentelle Untersuchungen an einer halbtechnischen Versuchsanlage durchgefuehrt. Die uebergeordneten Fuzzy-Systeme geben in Abhaengigkeit der verwendeten Eingangsgroessen Sauerstoffsollwerte fuer die einzelnen Beckenbereiche und die jeweils guenstigste Aufteilung des Belebungsbeckens (anoxische/aerobe Zone) vor. Die Ergebnisse zeigen, dass durch das flexible Reglerverhalten eine stabilere Stickstoffelimination und gleichzeitig eine Einsparung an eingetragener Luftmenge im Vergleich zu einem konventionellen Regelsystem erreicht werden kann. (orig.)

  14. Monitoring of organic loads at waste water treatment plant with due consideration of factual necessity, technical feasibility and statutory requirements; Erfassung der organischen Belastung bei Abwasserreinigungsanlagen unter Beachtung der fachlichen Notwendigkeit, der technischen Moeglichkeiten und der gesetzlichen Auflagen

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, P. [Stuttgart Univ. (Germany). Inst. fuer Siedlungswasserbau, Wasserguete- und Abfallwirtschaft

    1999-07-01

    Between the statutory requirement and factual necessity for monitoring organic loads in waste water discharged to municipal and industrial waste water treatment plant and effluents from these there are substantial discrepancies. The paper points out the different approaches and gives recommendations on how to proceed in the future. At plant with stable nitrification, self and external monitoring for BOD{sub 5} can be distinctly reduced without fear of impaired process transparency or water quality. Monitoring organic loads online is little expedient technically, especially where effluent from municipal sewage treatment plants is concerned. But in the industrial sector there exist the most diverse applications with a view to carbon elimination. (orig.) [German] Zwischen den gesetzlichen Anforderungen und der fachlichen Notwendigkeit bei der Erfassung der organischen Belastung im Zu- und Ablauf von kommunalen und industriellen Klaeranlagen bestehen erhebliche Diskrepanzen. In diesem Beitrag werden die unterschiedlichen Ansaetze aufgezeigt und Empfehlungen fuer die zukuenftige Vorgehensweise gegeben. Bei Anlagen mit stabiler Nitrifikation ist die Selbst- wie Fremdueberwachung bezueglich BSB{sub 5} deutlich zu reduzieren, ohne dass Einbussen fuer Prozesstransparenz und Gewaesserqualitaet zu erwarten sind. Die online-Ueberwachung der organischen Belastung ist insbesondere bei Ablaeufen in kommunalen Klaeranlagen fachlich wenig sinnvoll, im Bereich der industriellen Abwasserreinigung ergeben sich dafuer bei dem Reinigungsziel der Kohlenstoffelimination dagegen verschiedenste Anwendungsmoeglichkeiten. (orig.)

  15. Safety in pipeline systems. Prevention of pressure shocks and cavitation shocks; Sichere Rohrleitungssysteme. Vermeidung von Druckstoessen und Kavitationsschlaegen

    Energy Technology Data Exchange (ETDEWEB)

    Prasser, H.-M. [Forschungszentrum Rossendorf, Dresden (Germany); Dudlik, Andreas; Schoenfeld, Sri Budi Handajani; Apostolidis, Alexander; Schlueter, Stefan [Fraunhofer-Institut UMSICHT, Oberhausen (Germany)

    2002-06-01

    The Fraunhofer institute UMSICHT, Oberhausen, and Rossendorf research centre FZR investigated the causes and consequences of pressure shocks and cavitation shocks and ways to prevent them. The experimental set-up and software tools were made available. New methods for preventing pressure shocks and cavitation shocks were developed, and armatures were developed on this basis which are also suited for retrofitting. [German] In Rohrleitungssystemen koennen durch instationaere Stroemungsvorgaenge gefaehrliche Betriebsbedingungen entstehen, die infolge von mehrfach erhoehtem Systemdruck und von Lasteintraegen in Halterungen Mensch und Umwelt erheblich schaedigen. Je nach Industriebranche koennen unterschiedliche betriebsbedingte Ursachen zu sog. Druckstoessen, Kavitations- und Kondensationsschlaegen fuehren, z.B. Kontaktkondensation von Dampf und Wasser oder ploetzliche Aenderung der Fluessigkeitsgeschwindigkeit. Das Fraunhofer-Institut UMSICHT in Oberhausen und das Forschungszentrum Rossendorf FZR untersuchen Ursachen, Folgen und Moeglichkeiten zur Vermeidung von Druckstoessen und Kavitationsschlaegen. Hierzu stehen Versuchsanlagen unterschiedlichen Massstabs sowie Softwaretools zur Verfuegung. Aus den Forschungsergebnissen wurden neue Methoden zur Vermeidung von Druckstoessen und Kavitationsschlaegen entwickelt. Hierbei werden neue oder vorhandene Absperrarmaturen mit einem hydraulischen Bremssystem ausgeruestet und mit einer Rueckschlagklappe kombiniert angeordnet. Das System gilt auch fuer bereits existierende Anlagen als besonders geeignet, da es keine Hilfsenergie benoetigt und sich an Aenderungen der Systemparameter Druck und Fliessgeschwindigkeit selbststaendig anpasst. (orig.)

  16. Review of advances in human reliability analysis of errors of commission-Part 2: EOC quantification

    International Nuclear Information System (INIS)

    Reer, Bernhard

    2008-01-01

    In close connection with examples relevant to contemporary probabilistic safety assessment (PSA), a review of advances in human reliability analysis (HRA) of post-initiator errors of commission (EOCs), i.e. inappropriate actions under abnormal operating conditions, has been carried out. The review comprises both EOC identification (part 1) and quantification (part 2); part 2 is presented in this article. Emerging HRA methods in this field are: ATHEANA, MERMOS, the EOC HRA method developed by Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS), the MDTA method and CREAM. The essential advanced features are on the conceptual side, especially to envisage the modeling of multiple contexts for an EOC to be quantified (ATHEANA, MERMOS and MDTA), in order to explicitly address adverse conditions. There is promising progress in providing systematic guidance to better account for cognitive demands and tendencies (GRS, CREAM), and EOC recovery (MDTA). Problematic issues are associated with the implementation of multiple context modeling and the assessment of context-specific error probabilities. Approaches for task or error opportunity scaling (CREAM, GRS) and the concept of reference cases (ATHEANA outlook) provide promising orientations for achieving progress towards data-based quantification. Further development work is needed and should be carried out in close connection with large-scale applications of existing approaches

  17. Description of dedusting in wet flue gas scrubbers with purposeful utilization of the secondary dispersion; Detailliertere Simulation der Staubabscheidung in Nasswaeschern durch Beruecksichtigung der Sekundaerdispersion

    Energy Technology Data Exchange (ETDEWEB)

    Feldkamp, M.; Lessmann, B.; Neumann, J.; Fahlenkamp, H. [Dortmund Univ. (Germany). Lehrstuhl Umwelttechnik

    2003-07-01

    Modern wet gas scrubbers are used in the power plant technology for the flue gas desulphurisation of coal-fired plants. For this the washing liquid is sprayed by numerous nozzles. The specific arrangement of the nozzles in several levels makes it possible for the spray to penetrate mutually. The penetration and overlapping of the spray in the wet scrubber causes the effect of secondary dispersion. This effect can be used effectively to improve the efficiency of the atomisation and to improve the absorption of the pollution gases in a flue gas desulphurisation scrubber. Analyses show that the cleaning efficiency of a wet scrubber depends on the distribution and the size of the drops. (orig.) [German] Moderne Gaswaescher werden in der Kraftwerkstechnik fuer die Rauchgasentschwefelung kohlebefeuerter Anlagen eingesetzt. Hierzu wird Waschfluessigkeit mit Hilfe zahlreicher Duesen zerstaeubt. Eine gezielte Anordnung der Duesen in mehreren Spruehebenen ermoeglicht es den Sprays der Duesen, sich gegenseitig zu durchdringen. Der Effekt der Sekundaerdisperson, der beim Ueberschneiden und Durchdringen der Sprays waehrend der Zerstaeubung im Rauchgaswaescher auftritt, laesst sich wirksam zur Verbesserung des Wirkungsgrades einer Rauchgasentschwefelungsanlage nutzen. Durchgefuehrte Untersuchungen zeigen, dass die Reinigungsleistung eines nassen REA-Waeschers von der Verteilung und der Groesse der Tropfen abhaengt. (orig.)

  18. Better utilisation of district heating systems. Sub-project: Optimization of heat distribution - the Berlin pilot project. Final report; Bessere Ausnutzung von Fernwaermeanlagen. Teilvorhaben: Optimierung der Waeermeverteilung - Pilotprojekt Berlin. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Szepansky, T.; Ziemann, O.

    2001-09-01

    The Berlin pilot project comprises three aspects. (1) 'Generator simulation': Modelling of power generation systems in BoFiT was validated by means of existing calculation programs (Bewag) and measurements (HEW, HKW Hafen). (2) 'Optimization of pump use'. (3) 'Centralization of pressure maintenance'. The two latter aspects serve for optimized hydraulic control and supply assurance for validating network simulation in offline and online operation, including network data acquisition. [German] In KWK-Anlagen wird wirtschaftlich Strom und Waerme erzeugt. Der Aufwand fuer den Waermetransport ist vergleichsweise hoch. Automatisch geregelte und gesteuerte Umwaelzpumpen mit grossen Umwaelzwassermassenstroemen und Druckhoehen bieten ein hohes Optimierungspotential fuer die hydraulische Betriebsfuehrung von Fernwaermeversorgungsunternehmen. Der Einsatz von modular aufgebauten EDV-Systemen zur Betriebsoptimierung ist Gegenstand von staendig weiterfuehrenden Untersuchungen. Das Pilotprojekt Berlin 'Optimierung der Waermeverteilung' gliedert sich in drei Arbeitspunkte. Beim Arbeitspunkt 'Erzeugersimulation' wurde ausgehend von existierenden Kreislauf-Rechenprogrammen (Bewag) und Betriebsmessungen (HEW, HKW Hafen) die Modellbildung von Erzeugungsanlagen im Programmsystem BoFiT ueberprueft. Die Arbeitspunkte 'Pumpen-Einsatzoptimierung' und 'Zentralisierung der Druckhaltung' dienten der Optimierung der hydraulischen Betriebsfuehrung unter Einhaltung der Versorgungssicherheit zur Ueberpruefung der Netzsimulation sowohl im Offline- als auch im Online-Betrieb gekoppelt mit der Netzdatenerfassung. (orig.)

  19. Early embryonic development of the head region of Gryllus assimilis Fabricius, 1775 (Orthoptera, Insecta).

    Science.gov (United States)

    Liu, Yu; Maas, Andreas; Waloszek, Dieter

    2010-09-01

    We report our investigations on the embryonic development of Gryllus assimilis, with particular attention to the head. Significant findings revealed with scanning electron microscopy (SEM) images include: (1) the pre-antennal lobes represent the anterior-most segment that does not bear any appendages; (2) each of the lobes consists of central and marginal regions; (3) the central region thereof develops into the protocerebrum and the optic lobes, whereas the marginal region thereof becomes the anterior portion of the head capsule; (4) the initial position of the antennal segment is posterior to the mouth region; (5) appendage anlagen are transitorily present in the intercalary segment, and they later vanish together with the segment itself; (6) a bulged sternum appears to develop from the ventral surface of the mandibular, maxillary and labial segments. Embryonic features are then compared across the Insecta and further extended to the embryos of a spider (Araneae, Chelicerata). Striking similarities shared by the anterior-most region of the insect and spider embryos lead the authors to conclude that such comparison should be further undertaken to cover the entire Euarthropoda. This will help us to understand the embryology and evolution of the arthropod head. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. Combined heat and power generation. A guide for towns and communities, trade and industry; Kraft-Waerme-Kopplung. Ein Leitfaden fuer Staedte und Gemeinden, Gewerbe und Industrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The brochure describes the cogeneration technology and explains its advantages. Fields of application and potential users are characterized. The technical and economic prospects are outlined, as well as the cost-profit ratios and the chances and problems of this technology. [German] Die vorliegende Broschuere will dem Leser einen Ueberblick ueber die Thematik der KWK geben und einen Beitrag zu ihrer Foerderung leisten. Die Broschuere will: - Ueber KWK informieren, - die Vorteile der KWK erlaeutern, - die Anwendungsfelder und die moeglichen Anwender charakterisieren, - die technisch-wirtschaftlichen Moeglichkeiten fuer die Nutzung der kW aufzeigen, - die Kosten-Nutzen-Relationen und die wirtschaftlichen Chancen und Probleme der KWK verdeutlichen. (orig.)

  1. Manufacture and qualification of hot roll-clad composites with nickel base cladding material for use in flue gas desulphurization plants. Final report; Herstellung und Qualifizierung warmwalzplattierter Verbundwerkstoffe mit Nickelbasisauflagen fuer den Einsatz in Rauchgasentschwefelungsanlagen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kirchheiner, R.; Stenner, F.

    1992-03-16

    Flue gas desulphurization plants (FGD), which have been required by law since 1983, mainly apply wet scrubbing techniques. The chemical reactions taking place in those plants lead to extremely corrosive situations. Unprotected carbon steel surfaces or organic based anticorrosive systems are extremely affected after being in operation for only a few years. NiCrM alloys applied by the chemical industry in comparable situations have proved their efficiency for decades. When such massive components are newly built in FDGs, economic aspects require the use of those NiCrMo alloys in clad form. Within the frame of this project tests included the manufacture of hot roll-clad composites comprising cladding materials of the type NiMo16Cr15W (2.4819) and NiCr21Mo14W (2.4602) on the base steel RST 37-2. Large-sized sheets (10000 x 2000 x 10+2 mm) were made by means of an optimized cladding technique. The behaviour of the cladding material in case of uniform and local corrosion exposure was examined in standard laboratory tests. An increased susceptibility to intercrystalline corrosion was not detected, according to the excellent microstructure. Further laboratory tests under simulated FGD conditions and exposure tests in FGDs in operation permitted the transfer of those positive test results to practical work. The same applies without limitation to the joint-welded state with similar filler material of clad a comparable chemical composition. With respect to their technological behaviour the new hot roll-clad composites correspond to that of solid sheets of NiCrMo alloys; therefore they are qualified for use in flue gas desulphurization plants. (orig./BBR) With 32 refs., 13 tabs., 29 figs. [Deutsch] In den seit 1983 gesetzlich vorgeschriebenen Anlagen zur Rauchgasentschwefelung (REA) werden ueberwiegend nasse Waschverfahren eingesetzt. Die in diesen Anlagen ablaufenden chemischen Reaktionen fuehren zu extrem korrosiven Bedingungen. Ungeschuetzte C-Stahl-Oberflaechen bzw

  2. Heat recovery from UPS units - Analysis of a first unit and technology assessment; Waermerueckgewinnung in USV-Anlagen. Analyse einer Erstanlage und Potentialabschaetzung

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, S.; Schlegel, A.

    2009-11-15

    UPS units (uninterruptible power supply) generate large heat losses, which have to be dissipated with cooling units. awtec has developed a unique UPS system with integrated heat recovery which was installed in 2001 (Building Gretag/SAP in Regensdorf) and which is still running error-free. With this system the waste heat can be recovered and electrical energy for the refrigeration system can be saved likewise. The measured data shows that during the heating season, the unit transfers virtually all heat loss (about 20 MWh/year) to the space heating system. The building's refrigeration system, however, has its own heat recovery system, so the actual annual energy savings can be estimated to be only about 4 MWh of electricity. The prototype shows that awtec built a robust unit which - given an appropriate cooling and heating system - has the potential for high energy savings (without central heat recovery system: 4 MWh electric + 20 MWh thermal) without increased investment. Based on the UPS heat recovery development, previous projects of the Swiss Federal Office of Energy and a market survey, scenarios for the cooling and heat recovery from UPS units were developed. Since the same concepts also apply to the cooling of servers and other IT components, they were also included in the analysis. The scenario analysis shows that a high potential for savings of electric energy and heat exists in this area. In particular, the direct cooling of the IT components with cooling water offers big benefits for heat recovery and free cooling (cooling without the use of the refrigeration system) compared to conventional air cooling. These direct cooling systems are currently mainly used for special applications or as a fallback in case of overheating problems. Passive cooling through geothermal probes, which are now mainly used for buildings with small heat pump systems, provides an interesting approach to the cooling of IT equipment in accordance with the temperature level. It can further be noted that the cost and CO{sub 2} saving potential of systems with heat recovery, depending on plant size and equipment, may be greater than of the usually preferred free cooling. To realize the great potential to save energy, the solutions have to be known in the market and the planning process of the building has to be conducted interdisciplinary with experts for air-conditioning and heating as well as IT technicians. Today this is not the case. Only by interdisciplinary planning and cross-system thinking the best system can be obtained from available components. (authors)

  3. Simulation of transient hydraulic behaviour of process engineering plant with long pipes. Simulation des instationaeren hydraulischen Verhaltens verfahrenstechnischer Anlagen mit langen Rohrleitungen

    Energy Technology Data Exchange (ETDEWEB)

    Raschke, E. (BASF AG, Ludwigshafen am Rhein (Germany)); Seelinger, P. (BASF AG, Ludwigshafen am Rhein (Germany)); Sperber, A. (BASF AG, Ludwigshafen am Rhein (Germany)); Strassburger, R. (BASF AG, Ludwigshafen am Rhein (Germany))

    1994-05-01

    A knowledge of transient flow processes is becoming increasingly important for the reliable design and control of process engineering plant. Transient flow processes occur, of example, in long liquid-carrying pipes: on start-up and shut-down of plant, in emergency shut-downs and fast closure, i.e. when liquid is rapidly decelerated or accelerated. The consequence of such an event is a hammer effect, i.e. a short, often violent change of pressure placing considerable stress on structures. Such hammer effects are readily calculated by numerical methods in single phase media. Technical devices for prevention of inadmissibly high pressure surges can also be designed by means of simulation calculations. However, hammer effects also occur by sudden condensation of vapours. A number of systems in which condensation hammer effects can occur are considered at the end of this contribution. Two special damping measures are presented. (orig.)

  4. Cathodic corrosion protection for the inside areas of metallic plants (KKS-I); Kathodischer Korrosionsschutz fuer die Innenflaechen von metallischen Anlagen (KKS-I)

    Energy Technology Data Exchange (ETDEWEB)

    Tenzer, Norbert [TZ-International Corrosion Consulting, Hagen (Germany)

    2012-07-01

    Cathodic corrosion protection for the inside areas of metallic plants (KKS-I) is a worldwide used technology in order to afford a safe protection of metallic plans against corrosion. This technology is used for plants in the treatment and storage of drinking water, for containers and reaction vessels in the chemical industry, for plants in the oil and gas industry as well as for containers and large-dimension pipelines containing seawater for the cooling of air liquefaction plants, power plants and seawater desalination plants, for examples. Furthermore, there exist further special applications for wastewater systems and biogas plants. The general description of the KKS-I shall supply the information to the operators of appropriate plants, that the cathodic corrosion protection also offers a wide range of applications for the protection of the inside areas of the plants against corrosion. Beside the previously mentioned standard areas of application there exist manifold further possibilities of application for metallic plants. It has to be emphasized that there are application possibilities not only for unalloyed or low alloy steels but also for stainless steels, aluminium, lead, copper, titanium and zinc. The regulation DIN EN 12499 firstly edited in 2003 contains the fundamentals, areas of application and specifications.

  5. DIN EN 16001: Energy management systems in practice. A guide for companies and organisations; DIN EN 16001: Energiemanagementsysteme in der Praxis. Ein Leitfaden fuer Unternehmen und Organisationen

    Energy Technology Data Exchange (ETDEWEB)

    Kahlenborn, Walter; Kabisch, Sibylle; Klein, Johanna; Richter, Ina; Schuermann, Silas [Adelphi Research, Berlin (Germany)

    2010-06-15

    By 2020, Germany aims to reduce its CO2 emissions by 40 % on 1990. It won't be possible to achieve this goal without a significant increase in energy efficiency. Energy management systems help to increase energy efficiency in companies and organisations. They are a tool to enable continuous and systematic use of added energy saving potential. The resulting cost reductions also help to strengthen the company's competitive edge on the market. The EN 16001 standard which came into force in July 2009 defines standardised EU-wide criteria for an energy management system. These guidelines are intended to support organisations of any type, size and sector in the implementation of an energy management system. It highlights differences and similarities with the European environmental management system EMAS in a clear and practice-oriented way, as well as ISO 14001 which forms part of EMAS. The information shows that EMAS-certified companies often already meet all the requirements of an energy management system and that an energy management system also provides an excellent basis for the implementation of EMAS. (orig.)

  6. Substitution of the CFCs R-11, R-13, R-503, R-13B1, R-113, R-114 and R-12B1 in existing refrigerating, air-conditioning and heat pump systems with refrigerants of low ozone depletion potential in the Federal Republic of Germany. Status report; Ersatz der FCKW R11, R13, R503, R13B1, R113, R114, und R12B1 in bestehenden Kaelte-, Klima- und Waermepumpenanlagen in der Bundesrepublik Deutschland durch Kaeltemittel mit geringem Ozonabbaupotential. Statusbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The technical basics and the state of the art for the substitution of the CFC refrigerants R-11, R-13, R-503, R-13B1, R-113, R-114 and R-12B1 in existing refrigeration systems are described and explained. The report contains an overview of the current applications of these refrigerants in the FRG, a review and discussion of existing substitutes, the presentation and evaluation of research and experiences with the conversion to alternative refrigerants, the presentation of the required infrastructure and a discussion of the technical feasibility. The conversion of existing systems to refrigerants of lower ozone depletion potential is in conclusion evaluated with regard to its technical feasibility, environmental relevance and economic efficiency. (orig.) [Deutsch] Es werden die technischen Grundlagen und der Stand der Technik zum Ersatz der FCKW-Kaeltemittel R11, R13, R503, R13B1, R113, R114 und R12B1 in bestehenden Kaelteanlagen dargestellt und erlaeutert. Der Bericht beinhaltet einen Ueberblick ueber die derzeitige Anwendung dieser Kaeltemittel in der BRD, die Vorstellung und Diskussion existierender Ersatzstoffe, die Darstellung und Bewertung der Forschung und Erfahrungen zu Umruestungen auf Ersatzstoffe, die Vorstellung der erforderlichen Infrastruktur und die Diskussion der technischen Durchfuehrbarkeit. Die Umstellung bestehender Anlagen auf Kaeltemittel mit geringerem Ozonabbaupotential wird abschliessend hinsichtlich der technischen Durchfuehrbarkeit, der Umweltrelevanz und der Wirtschaftlichkeit bewertet. (orig.)

  7. Dismantling the activated annular water tank of the Rheinsberg nuclear power plant

    International Nuclear Information System (INIS)

    Klietz, Maik; Konitzer, Arnold; Luedeke, Michael

    2010-01-01

    Acting on behalf of Energiewerke Nord GmbH Lubmin, Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH (AKB) planned and built a station for disassembly of the activated annular water tank (RWB) of the decommissioned Rheinsberg nuclear power plant. As part of this demolition step, the annular water tank must be conditioned and disposed of as a component of the reactor facility. This required planning, manufacturing, testing and construction on site of suitable disassembly and handling techniques and the necessary plant and equipment. The client opted for disassembly by means of a diamond cable saw for conditioning the annular water tank into segments fit for shipping, and defined the basic components for the disassembly station in a specification of deliveries and services. The disassembly station serves to divide the annular water tank by means of diamond cable saws into 2 sections in such a way that segment pieces for transport are produced. The existing activation of the annular water tank also entailed the need to plan for the shortest possible time to be spent on handling near the annular water tank, providing radiological protection to the personnel, and performing the sawing steps from a separate operating console assisted by camera surveillance. After works acceptance tests at the manufacturer's, AKB, in October 2009 and February 2010, the disassembly station was delivered to the customer at Rheinsberg KKR free from defects in June 2010. (orig.)

  8. Methodology transfer for the preparation of NPP decommissioning for leading personnel of the Ignalina NPP and for the representatives of Lithuanian authorities

    International Nuclear Information System (INIS)

    Ackermann, L.; Baecker, A.

    2004-01-01

    At request of the Lithuanian government to receive support for the preparation of the decommissioning of Ignalina NPP, a bilateral project was financed by the German federal government to transfer experience from the decommissioning of the Greifswald and Rheinsberg NPPs to the management staff of the Ignalina NPP and to the representatives of the Lithuanian authorities in charge of the decommissioning. The methodology transfer project was prepared and carried out under the leadership of the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH. The practical implementation was within the responsibility of Energiewerke Nord GmbH (EWN) in cooperation with other German subcontractors. The methodology transfer comprised the task fields of project management, project planning, licensing procedure and waste management as well as social aspects of the further development of the industrial site. Five intensive one-week seminars were conducted mainly at the Greifswald NPP site and the knowledge gained was then consolidated in two evaluation seminars at the Ignalina NPP. As the basis for the training realised in 2002 and 2003, EWN provided about 2000 power-point illustrations, more than 200 transparencies and four video films. The training handouts produced by EWN were delivered to the seminar participants in Russian and English language and documented in the database ''Technische Dokumentation Ost'' (DOKU OST) of GRS. (orig.)

  9. Comparative assessment of condensation models for horizontal tubes

    International Nuclear Information System (INIS)

    Schaffrath, A.; Kruessenberg, A.K.; Lischke, W.; Gocht, U.; Fjodorow, A.

    1999-01-01

    The condensation in horizontal tubes plays an important role e.g. for the determination of the operation mode of horizontal steam generators of VVER reactors or passive safety systems for the next generation of nuclear power plants. Two different approaches (HOTKON and KONWAR) for modeling this process have been undertaken by Forschungszentrum Juelich (FZJ) and University for Applied Sciences Zittau/Goerlitz (HTWS) and implemented into the 1D-thermohydraulic code ATHLET, which is developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH for the analysis of anticipated and abnormal transients in light water reactors. Although the improvements of the condensation models are developed for different applications (VVER steam generators - emergency condenser of the SWR1000) with strongly different operation conditions (e.g. the temperature difference over the tube wall in HORUS is up to 30 K and in NOKO up to 250 K, the heat flux density in HORUS is up to 40 kW/m 2 and in NOKO up to 1 GW/m 2 ) both models are now compared and assessed by Forschungszentrum Rossendorf FZR e.V. Therefore, post test calculations of selected HORUS experiments were performed with ATHLET/KONWAR and compared to existing ATHLET and ATHLET/HOTKON calculations of HTWS. It can be seen that the calculations with the extension KONWAR as well as HOTKON improve significantly the agreement between computational and experimental data. (orig.) [de

  10. NET.EXCEL - a European thematic network for suggesting and prioritising future joint R and D projects

    International Nuclear Information System (INIS)

    Svemar, C.; Brewitz, W.

    2004-01-01

    The NET.EXCEL project concerns the forming of a network of European end users for analysing the present status and future needs in research, technical development and demonstration (RTD) for the disposal of highly radioactive waste in the three classical rock media: salt, clay/clay sediments and crystalline rock. The aim is to generate values additional to that gained by the individual participants: Svensk Kaernbraenslehantering AB (Sweden), Posiva Oy (Finland), Empresa Nacional de Residuos Radioactivos SA (Spain), Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (Germany), Agence nationale pour la gestion des dechets radioactifs (France), Nationale Genossenschaft fuer die Lagerung radioaktiver Abfaelle (Swizerland), Organisme National des Dechets Radioactifs et des Matieres Fissiles Enrichies (Belgium) and United Kingdom Nirex Limited (UK). The practical way to carry out the needed RTD-activities and the principles behind the process to establish priorities for the necessary RTD-work is quite similar among the participants. Common ground has been analysed for the role/responsibilities of the participating organisations, for the establishment of priorities for the RTD work and for the modus operandi of the organisations to carry out the RTD. The issue of prioritising the potential RTD activities and the factors taken into account by the participating organisations have been summarised and analysed with respect to the common denominator in the project. (orig.)

  11. Biogas plants in EEG. 4. new rev. and enl. ed.; Biogasanlagen im EEG

    Energy Technology Data Exchange (ETDEWEB)

    Loibl, Helmut; Maslaton, Martin; Bredow, Hartwig von; Walter, Rene (eds.)

    2016-08-01

    With the EEG 2014, the legislature has created a complete revision of all the RES plants. Specifically for biogas plants fundamental changes have been made with the maximum rated power or a new landscape conservation concept. For new biogas plants the legislator arranges not only a much lower remuneration, but also the direct marketing as a rule, which entails fundamental changes in the overall compensation system by itself. The new edition of this highly regarded standard work revives the extensive practical experience to EEG 2009, 2012 and 2014 in detail and in particular and takes into account the large number of newly issued clearinghouses decisions and judgments. All current legal issues and challenges of biogas plants can be found comprehensively presented here. [German] Mit dem EEG 2014 hat der Gesetzgeber eine komplette Neuregelung fuer alle EEG-Anlagen geschaffen. Speziell fuer Biogasanlagen wurden mit der Hoechstbemessungsleistung oder einem neuen Landschaftspflegebegriff grundlegende Aenderungen vorgenommen. Fuer neue Biogasanlagen ordnet der Gesetzgeber nicht nur eine deutlich geringere Verguetung, sondern zudem die Direktvermarktung als Regelfall an, was grundlegende Veraenderungen des gesamten Verguetungssystems nach sich zieht. Die Neuauflage dieses vielbeachteten Standardwerks greift die umfangreichen Praxiserfahrungen zum EEG 2009, 2012 und 2014 detailliert auf und beruecksichtigt insbesondere auch die Vielzahl der neu ergangenen Clearingstellenentscheidungen und Urteile. Alle aktuellen rechtlichen Themen und Herausforderungen bei Biogasanlagen finden Sie hier umfassend dargestellt.

  12. CENS - Annual Report 2002

    International Nuclear Information System (INIS)

    2003-01-01

    It is widely recognized that nuclear safety is one of the most important issues in the world. The process of transformation in the former communist countries of Central and Eastern Europe has created a delicate situation for nuclear regulators, often leaving them without necessary human and financial resources. Therefore, regulatory bodies from Central and Eastern European Countries (CEEC) welcomed the idea of the Center for Nuclear Safety in Central and Eastern Europe (CENS) - a non-profit organization that would help them to achieve independence and greater efficiency. After two years of preparation, the Center was founded in March 2002 in Bratislava. Funding for the project was provided by the Swiss Agency for Development and Cooperation (SDC), which saw the Center as a new approach to technical co-operation between regulatory bodies of East and West. The respective planning involved close collaboration between the Swiss Federal Nuclear Safety Inspectorate (HSK), IAEA, Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), and Nuclear Regulatory Authority of the Slovak Republic (UJD). The Center's main aims are to improve the independence, competence, and efficiency of nuclear regulatory bodies, and to improve safety in nuclear facilities, by providing a system of networking and international membership for regulators in CEEC and for technical support organizations from around Europe. In this Annual Report activities of the CENS in 2002 year are reported

  13. Cooperation in simulating a pressurized coal dust reactor with different simulation programs; Kooperation bei der Simulation eines Druckkohlenstaubreaktors mit unterschiedlichen Simulationsprogrammen

    Energy Technology Data Exchange (ETDEWEB)

    Ayar, A.; Hecken, M. [Technische Hochschule Aachen (Germany). Lehrstuhl fuer Waermeuebertragung und Klimatechnik; Mohr, M.; Murza, S. [Bochum Univ. (Germany). Lehrstuhl fuer Energieanlagentechnik; Richter, S.; Stroehle, J. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen

    1999-09-01

    The contribution presents the results of a cooperative project of three different universities - Department of Heat Transfer and Air Conditioning Engineering (WUeK) of RWTH Aachen, Department of Power Sytems Engineering (LEAT) of Ruhr-Universitaet Bochum, Institute of Chemical Engineering and Steam Boiler Engineering (IVD) of Stuttgart University - which involved modellilng a benchmark flame of the pressurized coal dust reactor of the Departmentof Heat Transfer and Air Conditioning Engineering. The conditions of the benchmark flame reflect a real firnace condition which so far has never been investigated experimentally. The contribution compares the results of the three different simulation programs and presents an outlook to the necessary further developments of the programs for modelling plants for pressurized coal dust combustion. [Deutsch] Es werden die Ergebnisse der Zusammenarbeit der drei beteiligten Institute - Lehrstuhl fuer Waermeuebertragung und Klimatechnik (WUeK) der RWTH Aachen, Lehrstuhl fuer Energieanlagentechnik (LEAT) der Ruhr-Uni Bochum und Institut fuer Verfahrenstechnik und Dampfkesselwesen (IVD) der Uni Stuttgart - bei der Modellierung einer Benchmarkflamme des Druckkohlenstaubreaktors am Lehrstuhl fuer Waermeuebertragung und Klimatechnik dargestellt. Diese Bedingungen fuer diese Benchmarkflamme sind einem realen, bis dato noch nicht experimentell untersuchten Feuerungszustand nachempfunden. Der Beitrag beinhaltet den Vergleich der mit drei unterschiedlichen Simulationsprogrammen erzielten Ergebnisse und gibt einen Ausblick auf die notwendigen Weiterentwicklungen der Programme hinsichtlich der Modellierung druckkohlenstaubgefeuerter Anlagen. (orig.)

  14. Potential power density and power generation of wind parks. Share of regional wind power generation in consumption for a ''2% scenario''; Potenzielle Leistungsdichte und Stromerzeugung von Windparks. Anteil der regionalen Windstromerzeugung am Verbrauch fuer ein ''2 %-Szenario''

    Energy Technology Data Exchange (ETDEWEB)

    Konetschny, Claudia; Schmid, Tobias; Jetter, Fabian [Forschungsstelle fuer Energiewirtschaft (FfE) e.V., Muenchen (Germany)

    2017-05-15

    Targets for wind energy use are given in different units. In addition to the number of plants, the power and the annual electricity generation, an information of a surface to be used for the use of wind power has become increasingly established. However, the relationships between area consumption, installed power and generated current are not approximately linear. On the basis of a small-scale modeling of the addition of wind energy installations using the wind resource tools WiSTl developed by the Research Center for Energy Economics (FfE), the article provides recommendations for the conversion of the area identified. In addition, the share of electricity generation based on a 2% scenario of power generation from wind power plants of the electricity consumption will be determined for each Federal State. [German] Ziele zur Windenergienutzung werden in verschiedenen Einheiten angegeben. Neben der Anzahl an Anlagen, der Leistung und der jaehrlichen Stromerzeugung hat sich zunehmend die Angabe einer fuer die Windkraftnutzung auszuweisenden Flaeche etabliert. Die Zusammenhaenge zwischen Flaechenverbrauch, installierter Leistung und erzeugter Strommenge sind jedoch nicht annaehernd linear. Anhand einer kleinteiligen Modeliierung des Zubaus von Windenergieanlagen mithilfe des von der Forschungsstelle fuer Energiewirtschaft (FfE) entwickelten Windszenario-Tools WiSTl gibt der Artikel Empfehlungen zur Umrechnung der ausgewiesenen Flaeche. Zusaetzlich wird basierend auf einem 2 %-Szenario der Anteil der Stromerzeugung aus Windenergieanlagen am Stromverbrauch je Bundesland bestimmt.

  15. CFD and system analysis code investigations of the multidimensional flow mixing phenomena in the reactor pressure vessel

    International Nuclear Information System (INIS)

    Ceuca, S.C.; Herb, J.; Schoeffel, P.J.; Hollands, T.; Austregesilo, H.; Hristov, H.V.

    2017-01-01

    The realistic numerical prediction of transient fluid-dynamic scenarios including the complex, three-dimensional flow mixing phenomena occurring in the reactor pressure vessel (RPV) both in normal or abnormal operation are an important issue in today's reactor safety assessment studies. Both Computational Fluid Dynamics (CFD) tools as well as fluid-dynamic system analysis codes, each with its advantages and drawbacks, are commonly used to model such transients. Simulation results obtained with the open-source CFD tool-box OpenFOAM and the German thermal-hydraulic system code ATHLET (Analysis of THermal-hydraulics of LEaks and Transients), the later developed by Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) for the analysis of the whole spectrum of operational transients, design-basis accidents and beyond design basis accidents anticipated for nuclear energy facilities, are compared against experimental data from the ROssendorf Coolant Mixing (ROCOM) test facility. In the case of the OpenFOAM CFD simulations the influence of various turbulence models and numerical schemes has been assessed while in the case of the system analysis code ATHLET a multidimensional nodalization recommended for real power plant applications has been employed. The simulation results show a good agreement with the experimental data, indicating that both OpenFOAM and ATHLET can capture the key flow features of the mixing processes in the Reactor Pressure Vessel (RPV). (author)

  16. A dual role for nanos and pumilio in anterior and posterior blastodermal patterning of the short-germ beetle Tribolium castaneum.

    Science.gov (United States)

    Schmitt-Engel, Christian; Cerny, Alexander C; Schoppmeier, Michael

    2012-04-15

    Abdominal patterning in Drosophila requires the function of Nanos (nos) and Pumilio (pum) to repress posterior translation of hunchback mRNA. Here we provide the first functional analysis of nanos and pumilio genes during blastodermal patterning of a short-germ insect. We found that nos and pum in the red flour beetle Tribolium castaneum crucially contribute to posterior segmentation by preventing hunchback translation. While this function seems to be conserved among insects, we provide evidence that Nos and Pum may also act on giant expression, another gap gene. After depletion of nos and pum by parental RNAi, Hunchback and giant remain ectopically at the posterior blastoderm and the posterior Krüppel (Kr) domain is not being activated. giant may be a direct target of Nanos and Pumilio in Tribolium and presumably prevents early Kr expression. In the absence of Kr, the majority of secondary gap gene domains fail to be activated, and abdominal segmentation is terminated prematurely. Surprisingly, we found Nos and Pum also to be involved in early head patterning, as the loss of Nos and Pum results in deletions and transformations of gnathal and pre-gnathal anlagen. Since the targets of Nos and Pum in head development remain to be identified, we propose that anterior patterning in Tribolium may involve additional maternal factors. Copyright © 2012 Elsevier Inc. All rights reserved.

  17. Nestin-Cre Mice Are Affected by Hypopituitarism, Which Is Not Due to Significant Activity of the Transgene in the Pituitary Gland

    Science.gov (United States)

    Galichet, Christophe; Lovell-Badge, Robin; Rizzoti, Karine

    2010-01-01

    Nestin-Cre mice express Cre recombinase under control of the rat nestin promoter and central nervous system (CNS) enhancer. While endogenous Nestin is expressed in some other tissues including the pituitary gland, Nestin-Cre mice induce recombination predominantly in the CNS. For this reason, they have been widely used to explore gene function or cell fate in the latter. Pituitary hormonal deficiencies, or hypopituitarism, are associated with a wide range of symptoms and with a significant morbidity. These can have a neural and/or a pituitary origin as the gland's secretions are controlled by the hypothalamus. We report here that Nestin-Cre mice themselves are affected by mild hypopituitarism. Hence, physiological consequences are expected, especially in combination with defects resulting from Cre mediated deletion of any gene under investigation. To further investigate the origin of this phenotype, we re-examined the activity of the transgene. We compared it with expression of Nestin itself in the context of the hypothalamo-pituitary axis, especially in the light of a recent report showing pituitary Nestin-Cre activity, which contrasts with previous data. Our results disagree with those of this recent study and do not support the claim that Nestin positive cells are present in the pituitary anlagen, the Rathke's pouch (RP). Moreover we did not observe any significant activity in the post-natal pituitary, in agreement with the initial report. PMID:20625432

  18. Management of aging in technical facilities of E.ON Kernkraft plants; Alterungsmanagement bei technischen Einrichtungen in Anlagen der E.ON Kernkraft GmbH

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Sven H.; Brast, Gerhard [E.ON Kernkraft GmbH, Hannover (Germany); Schoeckle, Friedrich [AMTEC Messtechnischer Service GmbH, Lauffen/N (Germany)

    2009-11-15

    The publication explains, by means of specific measures, the management of aging in technical facilities as practiced in the plants of E.ON Kernkraft GmbH. First, the historical background is outlined and the reasons for introducing management of aging in order to limit and control factors influencing the lifetime of nuclear power plants are described. This is followed by a definition of management of aging in important safety-related facilities as against lifetime management of technical systems relevant to plant availability. This is the context in which the scope of the survey of continuous management of aging is defined in respect of physical aging. A classification is then made in accordance with the staggered requirements to be met in the quality of technical facilities. On the basis of the quality to be assured, the different component groups are assigned corresponding operational measures and explained. These continuous measures extend from failure-oriented maintenance to preventive maintenance to the integrity concept for technical installations. To document the findings and evaluate the effectiveness of the measures taken, the integration of the process is described and reference is made to continuous optimization according to PDCA principles. The explicit introduction of the process of management of aging creates a platform which allows a documentation to be accumulated of the manifold and comprehensive measures taken to control phenomena of aging in technical installations. (orig.)

  19. Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) gGmbH, Germany. Annex I [Example of TSOs and their Interaction with Key Stakeholders

    International Nuclear Information System (INIS)

    2018-01-01

    The State, Federal States and TÜVs signed the Shareholders Agreement for the Company for Reactor Safety (GRS) mbH on 26th of May 1976. GRS is a private non-profit, non-governmental organization, established as a private limited company with shareholders. All services of GRS to the regulatory authorities are provided through projects based on both long term and task specific contracts within framework agreements.

  20. A guide to space HVAC systems. Fundamentals of thermodynamics, system components, standards and regulations; Leitfaden fuer Lueftungs- und Klimaanlagen. Grundlagen der Thermodynamik, Komponenten einer Vollklimaanlage, Normen und Vorschriften

    Energy Technology Data Exchange (ETDEWEB)

    Keller, L.

    2005-07-01

    The book addresses engineers and technicians in sales and marketing, purchasing, service and assembly, projecting and maintenance of air conditioning systems. It intends to help select the appropriate components for any given case of application, taking into account aspects of investment cost, economic efficiency, ease of maintenance, life and functionality. The book is based on the relevant technical rules, DIN standards, and VDI guidelines. Ventilation systems are constructed in accordance with the RAL quality and test specifications in order to meet all current pertinent quality and safety requirements. (orig.)

  1. Feasibility study for new ecolabels for the product group: Wood pellet firings. Final report; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Weiss, J.; Hirschl, B.

    2002-07-01

    gerechtfertigt ist, und welche Anforderungen diese im Vergabefall erfuellen sollten. Im Rahmen der Untersuchung wurde zunaechst eine umfassende Marktanalyse durchgefuehrt, um daraus die Anlagen zu identifizieren, die fuer ein Umweltzeichen in Frage kommen. Im Hauptteil der Studie erfolgte eine vertiefende Analyse der Umweltrelevanz der ausgewaehlten Anlagen. Hierzu wurde eine Herstellerbefragung durchgefuehrt und ein Systemvergleich mit Gas- und Oelheizkesseln sowie mit herkoemmlichen Holzfeuerungen auf Holzhackschnitzel- und Scheitholzbasis vorgenommen. Auf der Basis dieser Analyse wurden Vorschlaege fuer Vergabegrundlagen fuer Holzpelletheizkessel und Holzpelletraumheizer abgeleitet, die in einem Fachgespraech in einer breiten Runde von Experten und Herstellern vorgestellt und diskutiert wurden. Aus der Studie und dem Fachgespraech konnte ein deutliches Votum fuer die Umweltzeichen fuer die untersuchten Holzpelletfeuerungen abgeleitet werden. Holzpelletfeuerungen zeichnen sich durch ihren hohen Automatisierungsgrad und den Einsatz eines genormten Brennstoffes mit gleichbleibender hoher Qualitaet aus. Dadurch erreichen sie zum einen eine hohe Verbrennungsguete mit sehr geringen Emissionen, zum anderen werden Fehler durch unsachgemaesse Bedienung minimiert. Sie koennen zudem einen wichtigen Beitrag zur verstaerkten Nutzung erneuerbarer Energien leisten und so zur Erreichung der Klimaschutzziele beitragen. Die vorgeschlagenen Vergabegrundlagen umfassen Anforderungen an rationelle Energienutzung (Wirkungsgrad bei Nennlast und Teillast, Hilfsstrombedarf), Emissionswerte von CO, NO{sub x}, Staub und organischen Stoffen, Angebot von Dienstleistungen sowie Anforderungen an die Bedienungsanleitung. Als moegliche Umschrift eines Zeichens fuer Holzpelletfeuerungen wird empfohlen: 'Umweltzeichen... weil emissionsarm und energieeffizient'. (orig.)

  2. Feasibility study for new ecolabels according to ISO 14024 (type 1) within the product group: wood pellet heating systems; Machbarkeitsstudie fuer neue Umweltzeichen fuer die Produktgruppe: Holzpelletfeuerungen

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Weiss, J.; Hirschl, B. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany)

    2003-01-01

    gerechtfertigt ist, und welche Anforderungen diese im Vergabefall erfuellen sollten. Im Rahmen der Untersuchung wurde zunaechst eine umfassende Marktanalyse durchgefuehrt, um daraus die Anlagen zu identifizieren, die fuer ein Umweltzeichen in Frage kommen. Im Hauptteil der Studie erfolgte eine vertiefende Analyse der Umweltrelevanz der ausgewaehlten Anlagen. Hierzu wurde eine Herstellerbefragung durchgefuehrt und ein Systemvergleich mit Gas- und Oelheizkesseln sowie mit herkoemmlichen Holzfeuerungen auf Holzhackschnitzel- und Scheitholzbasis vorgenommen. Auf der Basis dieser Analyse wurden Vorschlaege fuer Vergabegrundlagen fuer Holzpelletheizkessel und Holzpelletraumheizer abgeleitet, die in einem Fachgespraech in einer breiten Runde von Experten und Herstellern vorgestellt und diskutiert wurden. Aus der Studie und dem Fachgespraech konnte ein deutliches Votum fuer ein Umweltzeichen fuer die untersuchten Holzpelletfeuerungen abgeleitet werden. Holzpelletfeuerungen zeichnen sich durch ihren hohen Automatisierungsgrad und den Einsatz eines genormten Brennstoffes mit gleichbleibender hoher Qualitaet aus. Dadurch erreichen sie zum einen eine hohe Verbrennungsguete mit sehr geringen Emissionen, zum anderen werden Fehler durch unsachgemaesse Bedienung minimiert. Sie koennen zudem einen wichtigen Beitrag zur verstaerkten Nutzung erneuerbarer Energien leisten und so zur Erreichung der Klimaschutzziele beitragen. Die vorgeschlagenen Vergabegrundlagen umfassen Anforderungen an rationelle Energienutzung (Wirkungsgrad bei Nennlast und Teillast, Hilfsstrombedarf), Emissionswerte von CO, NO{sub x}, Staub und organischen Stoffen, Angebot von Dienstleistungen sowie Anforderungen an die Bedienungsanleitung. Als moegliche Umschrift eines Zeichens fuer Holzpelletfeuerungen wird empfohlen: 'Umweltzeichen... weil emissionsarm und energieeffizient'. (orig.)

  3. Education and research when dismantling nuclear plants at the Technical University Dresden; Lehre und Forschung beim Rueckbau kerntechnischer Anlagen an der Technischen Universitaet Dresden

    Energy Technology Data Exchange (ETDEWEB)

    Hurtado, A.; Anthofer, A.; Cloppenborg, T.; Schreier, M. [Technische Univ. Dresden (Germany). Inst. fuer Energietechnik

    2013-08-15

    With the decision by the German government in 2011 to revoke the operating permission from 8 of the existing 17 German nuclear power plants, the responsibility of decommissioning and dismantling these plants has moved back into the focus of public awareness. Under the current legal conditions, the last nuclear plant will be disconnected from the grid on 31.12.2022 and this will create an enormous challenge for all the involved approving authorities, expert organisations, as well as companies involved in dismantling the plants. The development of new and efficient dismantling technologies and strategies is required to perform these highly responsible tasks. On the other hand, the nuclear competence and knowhow, as well as the promotion of young talents in the relevant scientific fields must be preserved. Technological and economic solutions are in demand for the various plants due to the different specifics of nuclear power plants. This will still require e.g. in the field of radiation protection highly qualified and well trained staff in future. The training of these skilled employees will require expanding the subject matter taught at universities, colleges and polytechnics to suit the changed parameters. The chair for hydrogen and nuclear energy technology at the TU Dresden will in future offer lectures as part of a new teaching discipline with the focus on dismantling and disposal. The course 'Dismantling nuclear power plants' took place for the first time in the summer semester 2013. It is organised as a three-day block seminar with an excursion to the company NIS Ingenieurgesellschaft mbH in Alzenau. The company NIS is a subsidiary of the Siempelkamp Nukleartechnik GmbH. This article intends to provide an overview of the contents of the courses and the impressions of the participants. In this way the TU Dresden is making a further contribution to preserving nuclear competence and inter-disciplinary dialogue. (orig.)

  4. Improving the economic efficiency of PV plants through own consumption - risks and opportunities; Erhoehung der Wirtschaftlichkeit von PV-Anlagen durch Eigenverbrauch. Chancen und Risiken

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Luis; Corradini, Roger [FfE Forschungsstelle fuer Energiewirtschaft e.V., Muenchen (Germany); Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

    2012-04-15

    The own-consumption regulation introduced in 2009 has led to an improved economic efficiency of PV plants. Even if the remuneration paid for own supply should be abolished, rising electricity prices will nevertheless strengthen the incentive for operators to increase their rate of own consumption. This scenario applies for the currently existing total of around 9 GW in installed PV capacity. A high rate of own consumption will continue to offer benefits for plants to be installed in future as well, and this will be further amplified if the scheduled cuts in feed-in compensation are moved forward in time. However, the promotion of own consumption of PV electricity can only provide relief to local electricity networks if these have a suitable load management in place. In spite of the compensation paid for own consumption it will further be necessary to find mechanisms that secure the economic effectiveness of efficiency technologies.

  5. The operation of nuclear power plants in the conflict between administrative law and criminal law. Betrieb kerntechnischer Anlagen im Spannungsfeld zwischen Verwaltungs- und Strafrecht

    Energy Technology Data Exchange (ETDEWEB)

    Stubbe, C. (Siemens AG, Erlangen (Germany, F.R.). Rechtsabteilung)

    The conflicting interests of administrative law and criminal law give rise to a number of burdensome conditions to be met by the operators of nuclear plants. Of course, it is one of the peculiarities of criminal law that nobody can decide for himself whether he wants to become involved in it. There is probably no other choice than meeting, with a good blend of composure and cleverness, the criteria now surrounding the operation of a nuclear facility. (orig.).

  6. Internet-based reservation system (Internet-based control of timers for building technical services) - Final report; Internetbasiertes Reservationssystem (Internetbasierte Einstellung von Zeitsteuerungen haustechnischer Anlagen) - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Huber, A.; Woodtli, M.

    2008-07-01

    A common measure to save energy in buildings is the adjustment of the operating time of the building service facilities to the busy time of the building (i.e. lowering period). For lack of better resources, the general lowering periods in irregularly occupied buildings often are reduced to a minimum or the adjustment of the operating time is completely missing. In order to adjust the operating time optimally to the actual busy time, an internet-based booking system has been developed, which allows users to register a room assignment online. This booking system is linked with the building service facilities. This ensure the optimal setting of the lowering periods and therefore allows saving energy. The technical implementation resulted from a programmable logic controller (PLC) that can be accessed via a web browser. Temperature offset boxes have been added as interface between the PLC and the existing facilities in order that the system is applicable in existing buildings too. The booking system has been installed in two test objects and has also been successfully tested with the responsible staff (caretaker, real estate management). The booking system may be contemplated online: http://www.hetag.ch. (author)

  7. The environmental and radionuclide laboratory at VKTA Rossendorf; Das Labor fuer Umwelt- und Radionuklidanalytik im VKTA Rossendorf

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, M.; Knappik, R.; Gleisberg, B.; Schaefer, I.; Boden, W.; Bothe, M. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany)

    2001-07-01

    The VKTA provides environmental and radionuclide analyses for remediation and waste management tasks at the Rossendorf research site and for commercial clients as well. The analyses, the correlated valuations and calculations were used for the decommissioning of nuclear facilities, for the remediation of contaminated mining sites and for environmental investigations. The Laboratory for Environmental and Radionuclide Analytics is able to handle and analyse artificial and natural radionuclides in the range from 10{sup -3} Bq until 10{sup 9} Bq. Besides the used activity measurement techniques ({alpha}-particle and {gamma}-ray spectrometry, {beta}-counting), which were also applied after radiochemical separations, mass-spectrometry with inductively coupled plasma provides analytical results for long-lived radionuclides and isotopic ratios very effective. The capability of the laboratory is demonstrated by selected applications. (orig.) [German] Der VKTA fuehrt im Rahmen seiner Rueckbau- und Entsorgungsaufgaben am Forschungsstandort Rossendorf und fuer externe Auftraggeber Umwelt- und Radionuklidanalysen als komplexe Dienstleistung durch. Die Analysen und die damit in Zusammenhang stehenden Bewertungen und Modellrechnungen finden beim Rueckbau kerntechnischer Anlagen, bei der Sanierung von Uranbergbau-Altlasten und im Umweltbereich Verwendung. Im Labor fuer Umwelt- und Radionuklidanalytik werden Proben mit kuenstlichen und natuerlichen Radionukliden im typischen Aktivitaetsbereich von 10{sup -3} Bq bis 10{sup 9} Bq bearbeitet und analysiert. Neben den Aktivitaetsmessverfahren ({alpha}-, {beta}-, {gamma}-Spektrometrie), die auch nach radiochemischen Trennungen eingesetzt werden, kommen massenspektrometrische Verfahren bei der Analyse langlebiger Radionuklide bzw. Isotopenverhaeltnisse zum Einsatz. Das Leistungsspektrum des Labors wird durch ausgewaehlte Applikationen belegt. (orig.)

  8. Solar campaign 'Solar - na klar.' (solar - of course). Final report; Solarkampagne 'Solar - na klar.'. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Gege, M.; Kleinsteuber, A.; Krabbe, P.; Kroeger, P.; Maschke, K.; Niedert, S.; Schindelmann, F.; Thunert, A.; Weinberg, H.

    2002-03-18

    The German market for technically matured solar-thermal systems for generating hot water is growing by 20 per cent per year, with some deviations due to incentive policies. This growth can be and is planned to be increased systematically, with following goals: A practical contribution to the Federal Government's efforts to achieve the goals regarding the protection of climate; creating future-oriented jobs; supporting ecologically sustainable ways of life and models of consumption by convincing the consumers and other target groups of the fact that it makes sense already today to start utilizing solar energy and to invest also on private basis. These targets are expected to be set up with the help of a three-year mass campaign (1999 until 2001), i.e. the campaign called ''Solar - na klar.'' (solar - of course). [German] Der deutsche Markt fuer die technisch ausgereiften solarthermischen Anlagen zur Warmwassererzeugung waechst mit ca. 20% p.a., mit foerderpolitisch bedingten Schwankungen. Dieses Wachstum kann und soll systematisch gesteigert werden, mit folgenden Zielsetzungen: Praktischer Beitrag zur Erreichung der Klimaschutzziele der Bundesregierung; Schaffung zukunftsorientierter Arbeitsplaetze; Befoerderung oekologisch nachhaltiger Lebensstile und Konsummuster durch die Ueberzeugung der Verbraucher und weiterer Zielgruppen, dass es heute bereits sinnvoll ist, in die Nutzung der Solarenergie konkret einzusteigen und auch privat zu investieren. Diese Ziele sollen mithilfe einer auf drei Jahre angelegten Breitenkampagne (1999 bis 2001), d.h. der Kampagne 'Solar - na klar.' erfolgen. (orig.)

  9. The kinetics of oocyst shedding and sporulation in two immunologically distinct strains of Eimeria maxima, GS and M6.

    Science.gov (United States)

    Al-Badri, Riadh; Barta, John Robert

    2012-11-01

    The kinetics of oocyst shedding and sporulation of two immunologically distinct strains of Eimeria maxima (GS and M6) were compared. Both strains had a prepatent period of approximately 120 h followed by peak oocyst shedding at 144-150 h post inoculation. Mean total oocyst output determined for each strain demonstrated that the fecundity of the M6 strain (12.8 × 10(3) ± 1.95) of E. maxima was roughly twice that of the GS strain (6.9 × 10(3) ± 3.33) when inoculated at the rate of 1,000 infective oocysts per bird. The process of oocyst sporulation was followed by repetitive sampling of sporulating oocysts at 26 °C with aeration over a 138 hour period. Sporulation was divided into five morphologically distinguishable stages whose abundance peaked at the following times during sporulation: unsporulated oocysts at 0 h; sporoblast anlagen at 18 h; sporoblasts without sporocyst walls at 22 h; and sporocysts without mature sporozoites at 38 h. The time to 50 % sporulation of E. maxima oocysts observed in the present study was approximately 53 h for both strains and all viable oocysts had completed sporulation by 60 h. In the present study, the prepatent periods, duration of oocyst shedding, and the relative kinetics of sporulation of the GS and M6 strains of E. maxima were found to be virtually identical despite the immunological distinctiveness of these two parasite strains.

  10. Pump-turbines with constant flow direction; Pumpenturbinen mit gleicher Durchstroemrichtung

    Energy Technology Data Exchange (ETDEWEB)

    Mollenkopf, G. [Zentrale Forschung Engineering, KSB AG, Frankenthal (Germany)

    1997-12-31

    This research project was sponsored by the federal ministry of science and technology BMFT (product owner: New Materials and Chemical Technologies - NMT). Its aim was to develop a novel unit that can work both as a pump and a turbine with a constant flow direction through internal blade adjustment. This specifically high-speed pump-turbine is suited for plants where a liquid in one case needs to be hauled against a rising pressure and where, in another case, there is a pressure drop in the same direction. So far, either a separate pump and turbine each are used which are temporarily stopped, involving corresponding effort, or - almost as a rule - the turbine is dispensed with, so that the energy locked up in the pressure drop goes unused. (orig.) [Deutsch] Die Zielsetzung unseres Forschungsvorhabens, das vom BMFT (Produkttraeger: Neue Materialien und Chemische Technologien - NMT) gefoerdert wird, war die Entwicklung eines neuartigen Aggregats, das durch interne Schaufelverstellung in der Lage ist, sowohl als Pumpe als auch als Turbine mit gleichbleibender Durchstroemrichtung zu arbeiten. Diese spezifisch schnellaeufige Pumpturbine kommt fuer Anlagen in Frage, in denen eine Fluessigkeit im einen Fall gegen einen anstehenden Druck gefoerdert werden muss und im anderen Fall in gleicher Richtung ein Druckgefaelle zur Verfuegung steht. Entweder werden bisher getrennt aufgestellte Pumpen und Turbinen mit zeitweisem Stillstand und entsprechendem Aufwand eingesetzt oder es wird - fast in der Regel - auf die Turbine und damit auf die im Druckgefaelle enthaltene Energie verzichtet. (orig.)

  11. Qualification of package units; Qualifizierung von Package Units

    Energy Technology Data Exchange (ETDEWEB)

    Brombacher, M.; Walter, U. [Bayer AG, Leverkusen (Germany)

    1999-07-01

    The use of package units in pharmaceutical plants is increasing. If they are involved in the manufacture of pharmaceuticals and have an influence on the quality of the end product, the user is required to validate the processes used. Parallel to the growing demands with respect to the automation of these units, the importance of PCS equipment has increased and with this the necessity for its qualification. Experience to date shows that the manufacturer's awareness of these requirements can be heightened still further. This paper describes approaches for improving the present situation and should be interpreted not as criticism but as providing an opportunity to increase the knowledge base and work together to define solutions which satisfy the guidelines. (orig.) [German] Der Einsatz von Package Units in Pharma-Anlagen erfaehrt zunehmende Verbreitung. Wenn sie an der Herstellung von Arzneimitteln beteiligt sind und auf die Qualitaet des Endprodukts Einfluss nehmen, unterliegen sie der Validierungspflicht, die der Anwender zu gewaehrleisten hat. Entsprechend den wachsenden Anforderungen an die Automatisierung dieser Einheiten ist auch der Stellenwert der PLT-Ausruestung angestiegen und mit ihm die Notwendigkeit von deren Qualifizierung. Die bisherige Praxis zeigt, dass die Sensbilitaet der Hersteller diesen Anforderungen gegenueber noch besser entwickelt werden kann. Der Beitrag zeigt Wege auf, um die derzeitige Situation zu verbessern und sollte nicht als Kritik sondern als Chance aufgefasst werden, den Wissensstand auszugleichen und gemeinsam zu richtliniengerechten Loesungen zu kommen. (orig.)

  12. Transcription factor ERG and joint and articular cartilage formation during mouse limb and spine skeletogenesis.

    Science.gov (United States)

    Iwamoto, Masahiro; Tamamura, Yoshihiro; Koyama, Eiki; Komori, Toshihisa; Takeshita, Nobuo; Williams, Julie A; Nakamura, Takashi; Enomoto-Iwamoto, Motomi; Pacifici, Maurizio

    2007-05-01

    Articular cartilage and synovial joints are critical for skeletal function, but the mechanisms regulating their development are largely unknown. In previous studies we found that the ets transcription factor ERG and its alternatively-spliced variant C-1-1 have roles in joint formation in chick. Here, we extended our studies to mouse. We found that ERG is also expressed in developing mouse limb joints. To test regulation of ERG expression, beads coated with the joint master regulator protein GDF-5 were implanted close to incipient joints in mouse limb explants; this led to rapid and strong ectopic ERG expression. We cloned and characterized several mammalian ERG variants and expressed a human C-1-1 counterpart (hERG3Delta81) throughout the cartilaginous skeleton of transgenic mice, using Col2a1 gene promoter/enhancer sequences. The skeletal phenotype was severe and neonatal lethal, and the transgenic mice were smaller than wild type littermates and their skeletons were largely cartilaginous. Limb long bone anlagen were entirely composed of chondrocytes actively expressing collagen IX and aggrecan as well as articular markers such as tenascin-C. Typical growth plates were absent and there was very low expression of maturation and hypertrophy markers, including Indian hedgehog, collagen X and MMP-13. The results suggest that ERG is part of molecular mechanisms leading chondrocytes into a permanent developmental path and become joint forming cells, and may do so by acting downstream of GDF-5.

  13. Dismantling the activated annular water tank of the Rheinsberg nuclear power plant; Zerlegung des aktivierten Ringwasserbehaelters des Kernkraftwerks Rheinsberg

    Energy Technology Data Exchange (ETDEWEB)

    Klietz, Maik; Konitzer, Arnold; Luedeke, Michael [Anlagen- und Kraftwerksrohrleitungsbau GmbH, Greifswald (Germany)

    2010-10-15

    Acting on behalf of Energiewerke Nord GmbH Lubmin, Anlagen- und Kraftwerksrohrleitungsbau Greifswald GmbH (AKB) planned and built a station for disassembly of the activated annular water tank (RWB) of the decommissioned Rheinsberg nuclear power plant. As part of this demolition step, the annular water tank must be conditioned and disposed of as a component of the reactor facility. This required planning, manufacturing, testing and construction on site of suitable disassembly and handling techniques and the necessary plant and equipment. The client opted for disassembly by means of a diamond cable saw for conditioning the annular water tank into segments fit for shipping, and defined the basic components for the disassembly station in a specification of deliveries and services. The disassembly station serves to divide the annular water tank by means of diamond cable saws into 2 sections in such a way that segment pieces for transport are produced. The existing activation of the annular water tank also entailed the need to plan for the shortest possible time to be spent on handling near the annular water tank, providing radiological protection to the personnel, and performing the sawing steps from a separate operating console assisted by camera surveillance. After works acceptance tests at the manufacturer's, AKB, in October 2009 and February 2010, the disassembly station was delivered to the customer at Rheinsberg KKR free from defects in June 2010. (orig.)

  14. 7. Conference: thermal waste management; 7. Fachtagung: Thermische Abfallbehandlung

    Energy Technology Data Exchange (ETDEWEB)

    Bilitewski, B. [Technische Univ. Dresden (Germany). Lehrstuhl fuer Abfallwirtschaft; Faulstich, M. [Technische Univ. Muenchen, Garching (Germany). Lehrstuhl und Versuchsanstalt fuer Wasserguete- und Abfallwirtschaft; Urban, A. (eds.) [Kassel Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    2002-07-01

    The conference focused on the optimization of incinerators and the production and utilization of refuse-derived fuels. Subjects: Legal regulations and their practical implementation; Development and optimization of technology and cost; Production and utilization of refuse-derived fuels. Experts from practice, projecting, plant construction and research presented their findings. [German] Die 7. gemeinsame Fachtagung 'Thermische Abfallbehandlung' der abfalltechnisch ausgerichteten Fachgebiete und Lehrstuehle der Universitaeten Dresden, Kassel und Muenchen steht in diesem Jahr unter dem Motto der Optimierung von Abfallverbrennungsanlagen und dem Gewinn und der Nutzung von Sekundaerbrennstoffen. Die Abfallwirtschaft benoetigt die thermischen Verfahren, um die politischen Vorgaben der Zukunft - Abfallentsorgung ohne Deponien - erreichen zu koennen. Mit der 7. Fachtagung wollen wir einen Ueberblick geben ueber die wichtigen Fragen der rechtlichen und politischen Lenkung und wie diese Lenkung in der Praxis wirkt. Mit den Regeln des BAT/BVT werden sowohl fuer die Mono- als auch Mitverbrennung von Abfaellen an die thermischen Anlagen hohe Anforderungen gestellt. Daher wird ein wichtiger Gesichtspunkt der Tagung die Entwicklungstendenz und Optimierung sowohl hinsichtlich der Technik als auch der Kosten von Abfallverbrennungsanlagen sein. Eine der zentralen Fragen der Abfallwirtschaft der naechsten 10 Jahre ist die Gewinnung von Sekundaerbrennstoff und die Nutzung dieser Brennstoffe in den verschiedenen thermischen Reaktoren und bestehenden Verbrennungsanlagen. Die hier zusammengestellten Aufsaetze aus der dreitaegigen Tagung mit ca. 30 Beitraegen von Autoren aus der Praxis, der planenden Bueros, Anlagenbaufirmen und Forschungseinrichtungen sollen Auskunft geben ueber den neuesten Stand der Entwicklung. (orig.)

  15. Research tool for the investigation of the driver/brake pedal interface; Forschungswerkzeug zur Untersuchung der Schnittstelle Fahrer/Bremspedal

    Energy Technology Data Exchange (ETDEWEB)

    Bill, K.H.; Breuer, B. [Technische Hochschule Darmstadt (Germany). Fachgebiet Fahrzeugtechnik; Leber, M. [DaimlerChrysler AG, Stuttgart (Germany); Becker, H. [Ford-Werke AG, Koeln (Germany)

    1999-02-01

    The driver/brake pedal interface gains increasing importance when one considers the increasing demands for driver safety and comfort in the vehicle, as well as Brake-by-Wire and braking assistance systems. The decoupling of the brake pedal from the rest of the brake system in the Brake-by-Wire power control braking system makes it necessary to give the brake pedal a specific characteristic. While this can only be slightly influenced in conventional brake systems due to the energetic coupling with the brake hydraulics, in future concepts this interface must be completely re-designed. At the Department of Automotive Engineering at the Technical University of Darmstadt (fzd), supported by the automobile producer Ford, Inc., new methods for the investigation of brake pedal feel under actual conditions with a specially designed test vehicle have been the subject of research. (orig.) [Deutsch] Mit der absehbaren Einfuehrung von Brake-by-Wire und Bremsassistenzsystemen gewinnt die Schnittstelle Fahrer / Bremspedal zunehmend an Bedeutung. Die Entkopplung des Bremspedals vom restlichen Bremssystem macht bei Brake-by-Wire-Anlagen eine gezielte Auslegung der Bremspedalcharakteristik notwendig. Waehrend diese bei konventionellen Bremssystemen infolge der energetischen Kopplung mit der Bremsenhydraulik nur in engen Grenzen beeinflusst werden kann, muss bei zukuenftigen Konzepten diese Schnittstelle vollstaendig neu ueberdacht werden. Am Fachgebiet Fahrzeugtechnik der Technischen Universitaet Darmstadt (fzd) wird, unterstuetzt durch die Ford-Werke AG, an neuen Ansaetzen zur Untersuchung des Bremspedalgefuehls unter realen Bedingungen mit einem speziell hierfuer aufgebauten Versuchstraeger geforscht. (orig.)

  16. Problems created by labour law in connection with the termination of a franchise agreement; Arbeitsrechtliche Probleme bei der Beendigung eines Konzessionsvertrages

    Energy Technology Data Exchange (ETDEWEB)

    Gentges, P.

    1994-12-31

    paragraph 613a BGB is applicable to the case of transfer of ownership of local power transmission networks in (formerly) independent supply areas. The decisive criterion defined by the BAG (Federal Labour Court) is the transfer of ownership of the essential operating equipment and the handing over of all business with customers, as the new owner of the facilities will use these for the same purpose as the former, namely to ensure and perform electricity supply. Application of paragraph 613 a BGB implies that the transferee, the local government utility, is obliged to take over the personnel employed at the time of takeover by the transferor either exclusively or overwhelmingly for the purpose of electricity distribution and supply in the given local supply area, regardless of their place of work. (orig./HSCH) [Deutsch] Paragraph 613a BGB ist auf die Uebertragung oertlicher Versorgungsnetze fuer die Energieversorgung in (ehemals) selbstaendigen Versorgungsgebieten anzuwenden. Entscheidend ist nach der staendigen Rechtsprechung des BAG hierfuer der Uebergang der fuer den Betrieb wesentlichen sachlichen Betriebsmittel sowie der Kundenbeziehungen, da der Erwerber der Anlagen mit ihrer Hilfe den gleichen arbeitstechnischen Zweck, die Aufrechterhaltung und Durchfuehrung der Stromversorgung, verfolgen kann wie der Veraeusserer. Bei Anwendung des Paragraph 613a BGB ist das erwerbende Stadtwerk verpflichtet, alle diejenigen Mitarbeiter des EVU zu uebernehmen, die im Uebernahmezeitpunkt ganz oder ueberwiegend fuer die Stromversorgung im jeweiligen Gebiet taetig waren, unabhaengig davon, welches ihr jeweiliger Taetigkeitsort ist. (orig./HSCH)

  17. Fifty years of Erlangen radiochemistry

    International Nuclear Information System (INIS)

    Morell, W.

    2007-01-01

    On June 29, 2006, the Radiochemical Laboratory of AREVA NP GmbH (formerly Siemens AG) in Erlangen celebrated its fiftieth anniversary. The occasion was marked by an event attended by more than 1,000 guests, among them Werner Gebauhr, the 85-year-old founder and first head of the Laboratory; the Managing Directors of AREVA NP GmbH, Ralf Gueldner and Ruediger Steuerlein; representatives of universities, research institutions, power utilities, and public authorities. The present head of the Radiochemical Laboratory, Wilfred Morell, sketched the highlights of the work performed over the past fifty years, which ranged from solid-state and very-high-purity materials technologies to development and service activities for nuclear technology. Manfred Erve, head of the Technical Center of AREVA NP GmbH, of which the Radiochemical Laboratory is a part, emphasized the changes in priorities over the past fifty years, which had always been met successfully by Radiochemistry. In the scientific part of the event, Wolfgang Schwarz (E.ON Kernkraftwerk GmbH, KKW Isar), Ulf Ilg (EnBW Kraftwerk AG, KKW Philippsburg), and Hans-Josef Allelein (Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH) explained 3 major subject areas in which Erlangen Radio-chemistry over many years has contributed basic findings (see other articles in this atw issue). On the occasion of the anniversary, a comprehensive booklet was published under the title of '50 Jahre Radiochemie Erlangen - 1956-2006'. (orig.)

  18. EBF proteins participate in transcriptional regulation of Xenopus muscle development.

    Science.gov (United States)

    Green, Yangsook Song; Vetter, Monica L

    2011-10-01

    EBF proteins have diverse functions in the development of multiple lineages, including neurons, B cells and adipocytes. During Drosophila muscle development EBF proteins are expressed in muscle progenitors and are required for muscle cell differentiation, but there is no known function of EBF proteins in vertebrate muscle development. In this study, we examine the expression of ebf genes in Xenopus muscle tissue and show that EBF activity is necessary for aspects of Xenopus skeletal muscle development, including somite organization, migration of hypaxial muscle anlagen toward the ventral abdomen, and development of jaw muscle. From a microarray screen, we have identified multiple candidate targets of EBF activity with known roles in muscle development. The candidate targets we have verified are MYOD, MYF5, M-Cadherin and SEB-4. In vivo overexpression of the ebf2 and ebf3 genes leads to ectopic expression of these candidate targets, and knockdown of EBF activity causes downregulation of the endogenous expression of the candidate targets. Furthermore, we found that MYOD and MYF5 are likely to be direct targets. Finally we show that MYOD can upregulate the expression of ebf genes, indicating the presence of a positive feedback loop between EBF and MYOD that we find to be important for maintenance of MYOD expression in Xenopus. These results suggest that EBF activity is important for both stabilizing commitment and driving aspects of differentiation in Xenopus muscle cells. Copyright © 2010 Elsevier Inc. All rights reserved.

  19. Low-cost waste incineration and recycling from the operator`s point of view; Kostenguenstige thermische Abfallverwertung und Kreislaufwirtschaftsgesetz aus Betreibersicht

    Energy Technology Data Exchange (ETDEWEB)

    Burgorf, J [Saarberg-Oekotechnic GmbH, Saarbruecken (Germany)

    1998-09-01

    The 1996 Act on Recycling and Waste Management specified that waste production should be reduced first of all, and that waste still produced should be recycled or used for power generation. Dumping and `classic` incineration are permissible only if it is the more acceptable solution from an environmental point of view. There are two categories of thermal treatment: Thermal treatment of `waste for dumping`, and use of the energy content of `waste for utilisation`. The contribution analyzes the effects of the law on future waste management concepts in consideration of the current situation of thermal treatment of residual waste. (orig.) [Deutsch] Das im Oktober 1996 in Kraft getretene Kreislaufwirtschafts- und Abfallgesetz (KrW-/AbfG) schreibt in den Grundsaetzen der Kreislaufwirtschaft fest, dass Abfaelle in erster Linie zu vermeiden und in zweiter Linie stofflich oder energetisch zu verwerten sind. Die Beseitigung von Abfaellen - und darunter faellt auch die `klassische` Muellverbrennung - ist nur dann zugelassen, wenn sie gegenueber der Verwertung die umweltvertraeglichere Loesung darstellt. Fuer die thermische Behandlung von Abfaellen denfiniert das KrW-/AbfG deshalb zwei Wege mit unterschiedlichen Ansaetzen: Zum einen die thermische Behandlung von `Abfaellen zur Beseitigung`, wie sie bisher in vielen Anlagen zur Muellverbrennung realisiert worden ist und zum anderen die energetische Nutzung von `Abfaellen zur Verwertung`. Der vorliegende Beitrag soll die Auswirkung dieser Vorgabe auf zukuenftige Abfallwirtschaftskonzepte unter Beruecksichtigung der derzeitigen Situation der thermischen Restabfallbehandlung darstellen. (orig.)

  20. New energy conversion processes and neglected auxiliary systems - a treasure trove for energy service providers; Neue Techniken und vernachlaessigte Nebenanlagen - eine Fundgrube fuer Energiedienstleister

    Energy Technology Data Exchange (ETDEWEB)

    Jochem, E.

    1998-12-31

    The paper shows that apart from the risks, the deregulation of the energy sector also offered new chances, which recently materialized in three emerging independent trends, initiating innovative approaches for energy conversion and applications and demand for new knowledge-based, near-production energy services as a new field for engineers: Providers of energy efficiency-related technology widen their capabilities by adding the new business segment of energy service marketing. Industrial energy users more strongly consider outsourcing of energy conversion systems and the relevant contracting schemes as an option for reducing energy costs. Public enterprise as energy users started following this trend, all the more as insufficient financial resources do not permit them to reinvest. The paper discusses the conversion processes which currently open up promising chances for energy service producers. (orig./CB) [Deutsch] Neben Gefahren, die inhaerentes Merkmal der Liberalisierung sind, zeichnen sich drei unabhaengige Entwicklungen ab, die innovative Initiativen in der Energiewandlung und -nutzung staerken und wissensintensive produktionsnahe Dienstleistungen als zentrale Aufgabe fuer den Ingenieur initieren: - Die Energieeffizienz-Technologieanbieter nehmen die Energiedienstleistungen in ihre Angebotspalette auf. - Die betrieblichen Energieanwender beginnen zunehmend, ueber das Outsourcing energiewandelnder Anlagen Energiekosten zu senken. - Die oeffentliche Hand als Energieanwender beginnt aehnlich zu denken, zumal sie infolge der hohen Verschuldung unzureichende finanzielle Mittel fuer Reinvestitionen hat. Hierueber sei kurz berichtet, bevor auf die Techniken eingegangen wird, die sich besonders aus heutiger Sicht fuer Energiedienstleister eignen. (orig./RHM)

  1. Optimum control strategy for phosphate elimination; Optimale Steuerstrategie zur Phosphatelimination

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, D.

    1997-12-31

    This study describes the most common phosphate elimination techniques. In the simplest cases, the chemicals are dosed according to previously established time curves. Nowadays, by contrast, dosage in proportion to quantity is largely preferred. Freight-proportional dosage will be more frequently employed in the future at plants for a population of more than 10000. Since investigations revealed that the results obtained using control systems are inferior to those obtained by means of automatic control systems, the latter are increasingly used. Even if PID control devices perform best, overshoot is not to be avoided with certainty because of the long dead time. According to the current state of knowledge, matched control and automatic control systems yield the best results. Further optimization can be achieved by driving them via a fuzzy-based system. (orig.) [Deutsch] In der vorliegenden Ausarbeitung wurden die gebraeuchlichsten Verfahren zur Phosphatelimination vorgestellt. In einfachsten Faellen wird die Dosierung nach festen Ganglinien vorgenommen. Sie wird heute weitgehend durch eine mengenproportionale Dosierung ersetzt. Frachtproportionale Dosierungen sind fuer Anlagen ueber 10.000 EW in Zukunft haeufiger zu finden. Nachdem die Untersuchungen gezeigt haben, dass Steuerungen nicht so gute Ergebnisse wie Reglungen ergaben, finden diese verstaerkt Anwendung. Auch wenn PID Regler das beste Ergebnis bringen, so kann mit Ihen wegen der langen Totzeiten ein Ueberschwingen nicht sicher vermieden werden. Nach heutiger Kenntnis erbringen aufeinander abgestimmte Steuer- und Reglungen die besten Ergebnisse. Werden sie ueber ein fuzzybasiertes System angesteuert, so ist eine weitere Optimierung gegeben. (orig.)

  2. Inelastic seismic behavior of post-installed anchors for nuclear safety related structures: Generation of experimental database

    Energy Technology Data Exchange (ETDEWEB)

    Mahadik, Vinay, E-mail: vinay.mahadik@iwb.uni-stuttgart.de; Sharma, Akanshu; Hofmann, Jan

    2016-02-15

    Highlights: • Experiments for evaluating seismic behavior of anchors were performed. • Two undercut anchor products in use in nuclear facilities were considered. • Monotonic tension, shear and cycling tension tests at different crack widths. • Crack cycling tests at constant, in-phase and out-of phase tension loads. • Characteristics for the two anchors as a function of crack width were identified. - Abstract: Post installed (PI) anchors are often employed for connections between concrete structure and components or systems in nuclear power plants (NPP) and related facilities. Standardized practices for nuclear related structures demand stringent criteria, which an anchor has to satisfy in order to qualify for use in NPP related structures. In NPP and related facilities, the structure–component interaction in the event of an earthquake depends on the inelastic behavior of the concrete structure, the component system and also the anchorage system that connects them. For analysis, anchorages are usually assumed to be rigid. Under seismic actions, however, it is known that anchors may undergo significant plastic displacement and strength degradation. Analysis of structure–component interaction under seismic loads calls for numerical models simulating inelastic behavior of anchorage systems. A testing program covering different seismic loading scenarios in a reasonably conservative manner is required to establish a basis for generating numerical models of anchorage systems. Currently there is a general lack of modeling techniques to consider the inelastic behavior of anchorages in structure–component interaction under seismic loads. In this work, in view of establishing a basis for development of numerical models simulating the inelastic behavior of anchors, seismic tests on two different undercut anchors qualified for their use in NPP related structures were carried out. The test program was primarily based on the DIBt-KKW-Leitfaden (2010) guidelines

  3. Market analysis onshore wind farming; Marktanalyse Windenergie an Land

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    Windenergieanlagen abgebaut werden, bedeutet das einen Neubau von 3 - 5 GW pro Jahr im Zeitraum bis 2035. Die aktuellen Zubauzahlen unterstreichen, dass gegenwaertig hinreichend Flaechen zur Verfuegung stehen. Bei der Flaechenverfuegbarkeit bestehen aber grundsaetzlich Risiken. Die Planung zur Bereitstellung von geeigneten Flaechen ist in der Regel den entsprechenden Genehmigungsverfahren vorgeschaltet und hat einen sehr hohen Zeitbedarf. Dabei ist der Umfang der Flaechenentwicklung von einer Vielzahl von Vorgaben sowie sehr stark von der Akzeptanz vor Ort abhaengig. Bei der Frage der Akzeptanz kommt den Planungstraegern auf staatlicher Seite auch insbesondere den Entwicklern und Investoren eine sehr grosse Bedeutung zu. Die Bandbreite der heutigen Gestehungskosten liegt aktuell zwischen 6 und 9 Ct/kWh, wobei die ueberwiegende Mehrzahl der heute betriebenen Anlagen sowie der ermittelten Potentiale zwischen 7,5 und 9 Ct/kWh liegt. Von der ersten Projektidee bis zur Inbetriebnahme vergehen durchschnittlich 5 Jahre. Der deutsche Windenergiemarkt ist sehr kleinteilig. So liegt der Anteil kleiner Windparks mit weniger als 6 Anlagen bei ueber 60 % aller Windenergieanlagen. Weiterhin ist der Markt gepraegt durch eine grosse Akteursvielfalt. Aus dieser Akteursvielfalt ergibt sich ein grosser Wettbewerb um geeignete Flaechen, zugleich aber auch eine breite und vielfaeltige Flaechenentwicklung, was sich u.a. in aktuellen Zubauzahlen widerspiegelt. Aufgrund der unterschiedlichen Planungsansaetze in den Laendern und Regionen kommt den Planungstraegern eine besondere Bedeutung zu. Personelle Ressourcen sowie die Erfahrung mit der Windenergieplanung beeinflussen erheblich die raeumliche Steuerung der Windenergie. Bei den ueberregionalen Projektentwicklern sowie Herstellern besteht eine grosse Kenntnis ueber den deutschen Markt (Kosten, verfuegbare Flaechen etc.).

  4. Formation of formaldehyde in biogas-engines and methods for reducing these emissions by exhaust-gas after-treatment; Entstehung von Formaldehydemissionen in Biogasmotoren und deren Verminderung durch inner- und nachmotorische Massnahmen

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Markus; Wachtmeister, Georg; Prager, Maximilian [TU Muenchen (Germany). Lehrstuhl fuer Verbrennungskraftmaschinen

    2011-07-01

    (BMU) following a resolution by the German Federal Parliament and attended by a Working Group of the Forschungsvereinigung Verbrennungskraftmaschinen e.V (FVV, Research Association for Combustion Engines). (orig.) [German] In der Vergangenheit wurden an Biogasmotoren immer wieder Grenzwertueberschreitungen der in der Technischen Anweisung zur Reinhaltung der Luft (TA Luft) limitierten Formaldehydemissionen festgestellt. Fuer die zukuenftige Einhaltung dieses Grenzwertes an bestehenden und neuen Anlagen wurden am Lehrstuhl fuer Verbrennungskraftmaschinen der Technischen Universitaet Muenchen im Rahmen des FVV-Forschungsvorhabens 918 die Ursachen und die Moeglichkeiten zur innermotorischen Verminderung dieser Emissionen untersucht. Dabei zeigte sich, dass die Formaldehydemissionen nur sehr eingeschraenkt durch innermotorische Massnahmen verringert werden koennen, ohne Wirkungsgrad und Stickoxidemissionen negativ zu beeinflussen. Dies und eine zusaetzliche Verschaerfung der Grenzwerte im Januar 2009 durch LAI-Beschluss machen den Einsatz von Abgasnachbehandlungstechniken notwendig. Wegen der fehlenden Datenbasis ueber das Langzeitverhalten solcher Systeme im Biogasbetrieb wurden deshalb in einem weiteren Vorhaben zwei Modellanlagen mit unterschiedlichen Technologien zur Abgasnachbehandlung ueber sechs Monate hinweg hinsichtlich ihrer Formaldehydemissionen ueberwacht. Im Hinblick auf die aktuelle Klimadebatte und die Klimawirksamkeit von Methan, die eine zukuenftige Begrenzung dieser Emissionen erwarten laesst, wurden darueber hinaus auch die Methanemissionen dieser Anlagen untersucht. Die Untersuchungen zeigten, dass beide betrachteten Abgasnachbehandlungstechnologien, Regenerative Thermische Oxidation (RTO) und Oxidationskatalysator (Oxi-Kat) grundsaetzlich geeignet sind, die geltenden Formaldehydgrenzwerte sicher zu unterschreiten. Es wurde jedoch auch klar, dass weiterer Forschungsbedarf hinsichtlich der Dauerhaltbarkeit des Oxi-Kats und dem Instationaerbetrieb des RTO

  5. Remotely handled and remotely operated valve, particularly for the hot part of radioactive plants. Fernhantierbare und fernbedienbare Armatur, insbesondere fuer den heissen Bereich radioaktiver Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Radovan, G.; Sandling, M.J.; Davidson, J.W.; Blaseck, K.; Hoffmeister, L.; Westendorf, H.

    1988-01-21

    The valve consists of a valve whose valve housing is built into a pipeline. The wear parts of the valve to be replaced, such as the valve body and valve seat, are combined into a replacement part. The replacement part and a clamp act together so that the replacement part is interlocked with the valve housing in the closed operating position. The exchange can be made by undoing a single central screw.

  6. Plant production, production energy, energy crops - approaches toward intelligent use of energy crops in bioenergy systems; Pflanzenproduktion, Produktionsenergie, Energiepflanzen - Ansaetze intelligenter Energiepflanzennutzung in Bioenergie-Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Scheibler, M. [ENTEC Environment Technology Umwelttechnik GmbH, Fussach (Austria); Priedl, J.

    2002-12-01

    Food surplus production in the European Union should be replaced by biomass plantation for biogas production. The choice of energy plants like sunflowers or triticale and the harvesting time depends on soils, microclimates and crop rotation. The authors present a consultance package for planning, construction and operation of a Complete Stirred Reactor for biomass fermentation. Investment and operating cost depend on plant size and degree of automation. (uke)

  7. Power engineering. Systems for energy conversion. Compact knowledge for study and profession. 4. upd. and enl. ed.; Energietechnik. Systeme zur Energieumwandlung. Kompaktwissen fuer Studium und Beruf

    Energy Technology Data Exchange (ETDEWEB)

    Zahoransky, Richard A.

    2009-07-01

    This textbook imparts to the reader a fundamental understanding for relations of energy conversion processes. It comprises the total spectra of energy engineering, starting with fundamentals of energy process engineering via description of operating power plants (all types) to energy distribution and - storage. Main topics are sustainable energy systems from renewable energy sources. combined systems (e.g. Gas/steam turbine power plants) and plants with cogeneration (e.g. modular cogeneration plants). A new chapter Kyoto-Protocol was created as a concept of emissions-free coal-fired power plants. A new wording for deregulation of energy markets was received. Numerous texts and graphs were been revised. Chapter 18 ''Deregulation of Energy Markets'' is newly revised. Due to its didactic concepts the book directs not only to students but also everybody, who is inerested into actual questions of energy engineering. (org./GL) [German] Dieses Lehrbuch vermittelt dem Leser ein grundlegendes Verstaendnis fuer die Zusammenhaenge der Energieumwandlungsprozesse. Es umfasst die gesamte Bandbreite der Energietechnik. Die Schwerpunkte reichen von nachhaltigen, erneuerbaren Energietechniken, Kombianlagen (z.B. Gas- und Dampfturbinen-Kraftwerke) ueber Anlagen mit Kraft-Waerme-Kaelte-Kopplung bis hin zum Kyoto-Protokoll. Die 4. Auflage beinhaltet erstmals Uebungsaufgaben mit ausfuehrlichen Loesungen zu den einzelnen Kapiteln. Mehrere Kapitel sind aktualisiert. Das Kapitel 18 ''Liberalisierung der Energiemaerkte'' ist neu gefasst. Aus dem Inhalt Energietechnische Grundlagen - Dampfkraftwerke - Kernkraftwerke - Gasturbinen - Kombinationskraftwerke - Stationaere Kolbenmotoren - Brennstoffzellen - Kraft-Waerme-Kaelte-Kopplung - Wasserkraft - Solartechnik - Windenergie - Biomasse - Geothermie - Energetische Muellverwertung - Energieverteilung und -speicherung - Liberalisierung der Energiemaerkte - Kyoto-Protokoll. (orig.)

  8. Methodology, status and plans for development and assessment of the code ATHLET

    Energy Technology Data Exchange (ETDEWEB)

    Teschendorff, V.; Austregesilo, H.; Lerchl, G. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH Forschungsgelaende, Garching (Germany)

    1997-07-01

    The thermal-hydraulic computer code ATHLET (Analysis of THermal-hydraulics of LEaks and Transients) is being developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) for the analysis of anticipated and abnormal plant transients, small and intermediate leaks as well as large breaks in light water reactors. The aim of the code development is to cover the whole spectrum of design basis and beyond design basis accidents (without core degradation) for PWRs and BWRs with only one code. The main code features are: advanced thermal-hydraulics; modular code architecture; separation between physical models and numerical methods; pre- and post-processing tools; portability. The code has features that are of special interest for applications to small leaks and transients with accident management, e.g. initialization by a steady-state calculation, full-range drift-flux model, dynamic mixture level tracking. The General Control Simulation Module of ATHLET is a flexible tool for the simulation of the balance-of-plant and control systems including the various operator actions in the course of accident sequences with AM measures. The code development is accompained by a systematic and comprehensive validation program. A large number of integral experiments and separate effect tests, including the major International Standard Problems, have been calculated by GRS and by independent organizations. The ATHLET validation matrix is a well balanced set of integral and separate effects tests derived from the CSNI proposal emphasizing, however, the German combined ECC injection system which was investigated in the UPTF, PKL and LOBI test facilities.

  9. Towards Regeneration of Articular Cartilage

    Science.gov (United States)

    Iwamoto, Masahiro; Ohta, Yoichi; Larmour, Colleen; Enomoto-Iwamoto, Motomi

    2014-01-01

    Articular cartilage is classified into permanent hyaline cartilage and has significant differences in structure, extracelluar matrix components, gene expression profile, and mechanical property from transient hyaline cartilage found in growth plate. In the process of synovial joint development, articular cartilage is originated from the interzone, developing at the edge of the cartilaginous anlagen, it establishes zonal structure over time and supports smooth movement of the synovial joint through life. The cascade actions of key regulators such as Wnts, GDF5, Erg, and PTHLH coordinate sequential steps of articular cartilage formation. Articular chondrocytes are restrictedly controlled not to differentiate into a hypertrophic stage by autocrine and paracrine factors and extracerllular matrix microenvironment, but retain potential to undergo hypertrophy. The basal calcified zone of articular cartilage is connected with subchondral bone, but not invaded by blood vessels nor replaced by bone, which is highly contrasted with the growth plate. Articular cartilage has limited regenerative capacity, but likely possesses and potentially uses intrinsic stem cell source in the superficial layer, Ranvier’s groove, the intra-articular tissues such as synovium and fat pad, and marrow below the subchondral bone. Considering the biological views on articular cartilage, several important points are raised for regeneration of articular cartilage. We should evaluate the nature of regenerated cartilage as permanent hyaline cartilage and not just hyaline cartilage. We should study how a hypertrophic phenotype of transplanted cells can be lastingly suppressed in regenerating tissue. Further, we should develop the methods and reagents to activate recruitment of intrinsic stem/progenitor cells into the damaged site. PMID:24078496

  10. Differential gene expression underlying ovarian phenotype determination in honey bee, Apis mellifera L., caste development.

    Science.gov (United States)

    Lago, Denyse Cavalcante; Humann, Fernanda Carvalho; Barchuk, Angel Roberto; Abraham, Kuruvilla Joseph; Hartfelder, Klaus

    2016-12-01

    Adult honey bee queens and workers drastically differ in ovary size. This adult ovary phenotype difference becomes established during the final larval instar, when massive programmed cell death leads to the degeneration of 95-99% of the ovariole anlagen in workers. The higher juvenile hormone (JH) levels in queen larvae protect the ovaries against such degeneration. To gain insights into the molecular architecture underlying this divergence critical for adult caste fate and worker sterility, we performed a microarray analysis on fourth and early fifth instar queen and worker ovaries. For the fourth instar we found nine differentially expressed genes (DEGs) with log 2 FC > 1.0, but this number increased to 56 in early fifth-instar ovaries. We selected 15 DEGs for quantitative PCR (RT-qPCR) analysis. Nine differed significantly by the variables caste and/or development. Interestingly, genes with enzyme functions were higher expressed in workers, while those related to transcription and signaling had higher transcript levels in queens. For the RT-qPCR confirmed genes we analyzed their response to JH. This revealed a significant up-regulation for two genes, a short chain dehydrogenase reductase (sdr) and a heat shock protein 90 (hsp90). Five other genes, including hsp60 and hexamerin 70b (hex70b), were significantly down-regulated by JH. The sdr gene had previously come up as differentially expressed in other transcriptome analyses on honey bee larvae and heat shock proteins are frequently involved in insect hormone responses, this making them interesting candidates for further functional assays. Copyright © 2016. Published by Elsevier Ltd.

  11. Autonomous shading and light deflection systems; Autarke Sonnenschutz- und Lichtlenksysteme

    Energy Technology Data Exchange (ETDEWEB)

    Klotz, F.H. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany)

    1998-02-01

    The motivations for solar control and daylighting systems at buildings are the reduced use of conventional energy and the improved comfort, for living as well as for working. Light guiding devices can be used in order to obtain daylight still in the deep interior of a building or in order to illuminate special targets. Due to the daily and seasonal changes in the Sun`s position, these devices must be constantly adapted. Using simple and reliable passive thermohydraulic drive technology, many applications for daylighting systems become feasible which were of merely theoretical interest in the past. ZSW has started an initiative for the development of such building-integrated solar systems. This report shows the latest results. (orig.) [Deutsch] Energie- und Umweltaspekte sowie neuere Erkenntnisse der Chronobiologie fordern eine intelligentere und effizientere Architektur und Gebaeudetechnik. Eine zentrale Rolle spielen dabei die transparenten Bauteile (Fenster, Glasfassaden, Atrien, Oberlichter, etc.), da dort der hauptsaechliche Energieaustausch (Waerme, Luft) stattfindet. Eine wirksame Kontrolle dieses Energieflusses - im Kontext der saisonalen und diurnalen Schwankungn der Sonneneinstrahlung - ist der Schluessel zur Reduktion des Gebaeudeenergiebedarfs (Heizung, Kuehlung, Beleuchtung, Lueftung) und der Steigerung des visuellen und thermischen Komforts. Es wurde eine Entwicklungsinitiative fuer passive thermohydraulisch gefuehrte Sonnenschutz- und Lichtlenksysteme gestartet, die durch die Sonne selbst mit Energie versorgt und reguliert werden und damit vollkommen autark sind. Hieraus ergibt sich ein hohes Kostenreduktionspotential fuer den Betrieb solcher Anlagen. Ein Meilenstein dieser Entwicklungen ist der von ZSW fuer die Sonnenlichtlenkung entwickelte erste passive zweiachsig nachgefuehrte Heliostat, welcher bereits seit 16 Monaten stoerungsfrei in Betrieb ist. (orig.)

  12. FoxA4 favours notochord formation by inhibiting contiguous mesodermal fates and restricts anterior neural development in Xenopus embryos.

    Science.gov (United States)

    Murgan, Sabrina; Castro Colabianchi, Aitana Manuela; Monti, Renato José; Boyadjián López, Laura Elena; Aguirre, Cecilia E; Stivala, Ernesto González; Carrasco, Andrés E; López, Silvia L

    2014-01-01

    In vertebrates, the embryonic dorsal midline is a crucial signalling centre that patterns the surrounding tissues during development. Members of the FoxA subfamily of transcription factors are expressed in the structures that compose this centre. Foxa2 is essential for dorsal midline development in mammals, since knock-out mouse embryos lack a definitive node, notochord and floor plate. The related gene foxA4 is only present in amphibians. Expression begins in the blastula -chordin and -noggin expressing centre (BCNE) and is later restricted to the dorsal midline derivatives of the Spemann's organiser. It was suggested that the early functions of mammalian foxa2 are carried out by foxA4 in frogs, but functional experiments were needed to test this hypothesis. Here, we show that some important dorsal midline functions of mammalian foxa2 are exerted by foxA4 in Xenopus. We provide new evidence that the latter prevents the respecification of dorsal midline precursors towards contiguous fates, inhibiting prechordal and paraxial mesoderm development in favour of the notochord. In addition, we show that foxA4 is required for the correct regionalisation and maintenance of the central nervous system. FoxA4 participates in constraining the prospective rostral forebrain territory during neural specification and is necessary for the correct segregation of the most anterior ectodermal derivatives, such as the cement gland and the pituitary anlagen. Moreover, the early expression of foxA4 in the BCNE (which contains precursors of the whole forebrain and most of the midbrain and hindbrain) is directly required to restrict anterior neural development.

  13. Solarthermische Kraftwerksentwicklung (STKE) - development of solar thermal power plants. Technical aspects. Final report; Solarthermische Kraftwerksentwicklung (STKE). Technischer Teil. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pitz-Paal, R.

    2000-01-01

    This project started on 1 January 1996 with DM 3.7 million funds from the BMFT. Originally scheduled for three years, it was extended by a further 11 months for various reasons. Its intention was to reduce the cost of future solar thermal power plants. Particular emphasis was given to the parabolic trough technology asit is closest to commercialisation. Three strategies were involved: 1. Further development and qualification of components for the parabolic trough collector (WG PAREX); 2. Development of instruments for measuring radiation flux distribution in parabolic trough collectors (WG PARMESAN); 3. Development, verification and application of software tools for analysing the complex dynamic response of solar thermal power plants (WG SISTA). [German] Das hier dargestellte Projekt begann am 1.1.1996 und wurde vom Bundesministerium fuer Forschung und Technologie (BMFT) mit etwa 3,7 Mio. DM gefoerdert. Es hatte eine geplante Laufzeit von drei Jahren, wurde aber aufgrund von unterschiedlichen Verzoegerungen (Mitarbeiterwechsel, Defekte an Versuchsanlagen) kostenneutral um 11 Monate verlaengert. Gesamtziel des Projekts war es, zur Kostensenkung bei zukuenftigen solarthermischen Kraftwerken beizutragen. Dabei stand insbesondere die Parabolrinnentechnik im Vordergrund, da sie im Vergleich zu anderen solarthermischen Technologien einer weiteren kommerziellen Vermarktung derzeit am naechsten steht. Es wurden drei Schwerpunkte verfolgt: 1. Die Weiterentwicklung und Qualifizierung von Komponenten fuer den Parabolrinnenkollektor (Arbeitspaket 'Parabolrinnenexperimente', kurz PAREX) 2. Die Entwicklung von Messtechnik zur Bestimmung von Strahlungsflussverteilung bei Parabolrinnenkollektoren (AP 'Parabolrinnen-Messanlage', kurz PARMESAN) 3. Die Erstellung, Verifikation und Anwendung von Softwarewerkzeugen zur Analyse des komplexen dynamischen Verhaltens von solarthermischen Kraftwerken (AP 'Simulation solarthermischer Anlagen', kurz SISTA) (orig.)

  14. Relativistic exotic nuclei as projectile beams. New perspectives of studies on the properties of nuclei; Relativistische exotische Kerne als Projektilstrahlen. Neue Perspektiven zum Studium der Kerneigenschaften

    Energy Technology Data Exchange (ETDEWEB)

    Geissel, H

    1997-03-01

    Examinations of the production cross-sections and the kinematics permitted refinement of model concepts of the peripheral reactions in exotic nuclei at energies from 100 to 1000 A MeV. Due to the strong selectivity and resolution achieved it was possible to discover a large number of novel isotopes at the fragment separator FRS, despite the relatively low projectile beam intensities of the SIS. The two twice magic nuclei found, Ni 78 and Sn 100, are particularly interesting, as they could not be measured so far with other experimental systems. Fission of relativistic uranium ions proved to be a particularly successful process yielding many medium-heavy, neutron-rich nuclei. Insight into the structure of light neutron halos could be improved. The superlarge spatial dimensions of the nuclear halos is discussed. (orig./CB) [Deutsch] Die Untersuchungen der Produktionsquerschnitte und der Kinematik fuehr ten zu einer Verfeinerung der Modellvorstellungen der peripheren Kernr eaktionen an exotischen Kernen bei Energien im Bereich von 100- 1000 A MeV. Die hohe Selektivitaet und Aufloesung waren die Voraussetzung, da ss schon bei den vergleichsweise niedrigen Projektilstrahlintensitaete n des SIS eine grosse Anzahl von neuen Isotopen am Fragmentseparator F RS entdeckt werden konnten. Besonders erwaehnenswert sind die beiden d oppelt magischen Kerne Ni 78 und Sn 100, die mit anderen experimentel len Anlagen vorher nicht zugaenglich waren.Die Spaltung relativistisch er Uranionen hat sich als eine besonders ergiebige Quelle fuer mittels chwere neutronenreiche Kerne erwiesen. Die Kenntnisse der Struktur lei chter Neutronen- Halokerne konnten erweitert werden. Die uebergrosse r aeumliche Ausdehnung der Halokerne wurde aufgezeigt.

  15. IPSN international activities in 1999

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    This article is a reprint of a chapter taken from the 1999 activity report of the French Institute of Nuclear Protection and Safety (IPSN) and devoted to the international activities of the IPSN, in particular the cooperation of IPSN with its German homologue GRS (Gesellschaft fuer Anlagen und Reaktorsicherheit): assistance to Eastern Europe countries (development of regulation and constitution of safety files in Ukraine, transfer of computer codes and training, safety evaluation of the Mochvce nuclear power plant in Slovakia, reduction of the risks generated by the Tchernobyl shelter, assistance for the decommissioning of the Tchernobyl power plant, analysis of improvements proposed for the Medzamor unit 2 of Armenia, evaluation of fire hazard risks, assistance to Lithuania for the licensing of the Ignalina 1 unit); cooperation with China; international cooperation about the methods and tools for crisis management; international collaboration about IPSN's serious accident codes; extension of cooperation with Japan in radiation protection and radio-ecology; nuclear safety exercises in Russia and Armenia; development of Russia's national control of nuclear materials; collaboration with the medical radiological research center of Obninsk (Russia); radiation protection assistance in Turkey after a source accident; neutron measurements at the Vandellos 2 power plant (Spain); European intercomparison of neutron dosimetry; international intercomparison of uranium dosimetry in urines; participation to European research programs; construction of a database about the Tchernobyl accident consequences; organization of the Eurosafe European forum on the safety of nuclear facilities; development and validation of the Astec computer code for the simulation of nuclear accidents; evaluation report concerning the French-German EPR reactor project. (J.S.)

  16. Acetylcholinesterase Regulates Skeletal In Ovo Development of Chicken Limbs by ACh-Dependent and -Independent Mechanisms.

    Directory of Open Access Journals (Sweden)

    Janine Spieker

    Full Text Available Formation of the vertebrate limb presents an excellent model to analyze a non-neuronal cholinergic system (NNCS. Here, we first analyzed the expression of acetylcholinesterase (AChE by IHC and of choline acetyltransferase (ChAT by ISH in developing embryonic chicken limbs (stages HH17-37. AChE outlined formation of bones, being strongest at their distal tips, and later also marked areas of cell death. At onset, AChE and ChAT were elevated in two organizing centers of the limb anlage, the apical ectodermal ridge (AER and zone of polarizing activity (ZPA, respectively. Thereby ChAT was expressed shortly after AChE, thus strongly supporting a leading role of AChE in limb formation. Then, we conducted loss-of-function studies via unilateral implantation of beads into chicken limb anlagen, which were soaked in cholinergic components. After varying periods, the formation of cartilage matrix and of mineralizing bones was followed by Alcian blue (AB and Alizarin red (AR stainings, respectively. Both acetylcholine (ACh- and ChAT-soaked beads accelerated bone formation in ovo. Notably, inhibition of AChE by BW284c51, or by the monoclonal antibody MAB304 delayed cartilage formation. Since bead inhibition of BChE was mostly ineffective, an ACh-independent action during BW284c51 and MAB304 inhibition was indicated, which possibly could be due to an enzymatic side activity of AChE. In conclusion, skeletogenesis in chick is regulated by an ACh-dependent cholinergic system, but to some extent also by an ACh-independent aspect of the AChE protein.

  17. Disorders of the pediatric pancreas: imaging features

    International Nuclear Information System (INIS)

    Nijs, Els; Callahan, Michael J.; Taylor, George A.

    2005-01-01

    The purpose of this manuscript is to provide an overview of the normal development of the pancreas as well as pancreatic pathology in children. Diagnostic imaging plays a major role in the evaluation of the pancreas in infants and children. Familiarity with the range of normal appearance and the diseases that commonly affect this gland is important for the accurate and timely diagnosis of pancreatic disorders in the pediatric population. Normal embryology is discussed, as are the most common congenital anomalies that occur as a result of aberrant development during embryology. These include pancreas divisum, annular pancreas, agenesis of the dorsal pancreatic anlagen and ectopic pancreatic tissue. Syndromes that can manifest pancreatic pathology include: Beckwith Wiedemann syndrome, von Hippel-Lindau disease and autosomal dominant polycystic kidney disease. Children and adults with cystic fibrosis and Shwachman-Diamond syndrome frequently present with pancreatic insufficiency. Trauma is the most common cause of pancreatitis in children. In younger children, unexplained pancreatic injury must always alert the radiologist to potential child abuse. Pancreatic pseudocysts are a complication of trauma, but can also be seen in the setting of acute or chronic pancreatitis from other causes. Primary pancreatic neoplasms are rare in children and are divided into exocrine tumors such as pancreatoblastoma and adenocarcinoma and into endocrine or islet cell tumors. Islet cell tumors are classified as functioning (insulinoma, gastrinoma, VIPoma and glucagonoma) and nonfunctioning tumors. Solid-cystic papillary tumor is probably the most common pancreatic tumor in Asian children. Although quite rare, secondary tumors of the pancreas can be associated with certain primary malignancies. (orig.)

  18. Methodology, status and plans for development and assessment of the code ATHLET

    International Nuclear Information System (INIS)

    Teschendorff, V.; Austregesilo, H.; Lerchl, G.

    1997-01-01

    The thermal-hydraulic computer code ATHLET (Analysis of THermal-hydraulics of LEaks and Transients) is being developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) for the analysis of anticipated and abnormal plant transients, small and intermediate leaks as well as large breaks in light water reactors. The aim of the code development is to cover the whole spectrum of design basis and beyond design basis accidents (without core degradation) for PWRs and BWRs with only one code. The main code features are: advanced thermal-hydraulics; modular code architecture; separation between physical models and numerical methods; pre- and post-processing tools; portability. The code has features that are of special interest for applications to small leaks and transients with accident management, e.g. initialization by a steady-state calculation, full-range drift-flux model, dynamic mixture level tracking. The General Control Simulation Module of ATHLET is a flexible tool for the simulation of the balance-of-plant and control systems including the various operator actions in the course of accident sequences with AM measures. The code development is accompained by a systematic and comprehensive validation program. A large number of integral experiments and separate effect tests, including the major International Standard Problems, have been calculated by GRS and by independent organizations. The ATHLET validation matrix is a well balanced set of integral and separate effects tests derived from the CSNI proposal emphasizing, however, the German combined ECC injection system which was investigated in the UPTF, PKL and LOBI test facilities

  19. Dysphagia and disrupted cranial nerve development in a mouse model of DiGeorge (22q11 deletion syndrome

    Directory of Open Access Journals (Sweden)

    Beverly A. Karpinski

    2014-02-01

    Full Text Available We assessed feeding-related developmental anomalies in the LgDel mouse model of chromosome 22q11 deletion syndrome (22q11DS, a common developmental disorder that frequently includes perinatal dysphagia – debilitating feeding, swallowing and nutrition difficulties from birth onward – within its phenotypic spectrum. LgDel pups gain significantly less weight during the first postnatal weeks, and have several signs of respiratory infections due to food aspiration. Most 22q11 genes are expressed in anlagen of craniofacial and brainstem regions critical for feeding and swallowing, and diminished expression in LgDel embryos apparently compromises development of these regions. Palate and jaw anomalies indicate divergent oro-facial morphogenesis. Altered expression and patterning of hindbrain transcriptional regulators, especially those related to retinoic acid (RA signaling, prefigures these disruptions. Subsequently, gene expression, axon growth and sensory ganglion formation in the trigeminal (V, glossopharyngeal (IX or vagus (X cranial nerves (CNs that innervate targets essential for feeding, swallowing and digestion are disrupted. Posterior CN IX and X ganglia anomalies primarily reflect diminished dosage of the 22q11DS candidate gene Tbx1. Genetic modification of RA signaling in LgDel embryos rescues the anterior CN V phenotype and returns expression levels or pattern of RA-sensitive genes to those in wild-type embryos. Thus, diminished 22q11 gene dosage, including but not limited to Tbx1, disrupts oro-facial and CN development by modifying RA-modulated anterior-posterior hindbrain differentiation. These disruptions likely contribute to dysphagia in infants and young children with 22q11DS.

  20. Disorders of the pediatric pancreas: imaging features

    Energy Technology Data Exchange (ETDEWEB)

    Nijs, Els [University Hospital Gasthuisberg, Department of Radiology, Leuven (Belgium); Callahan, Michael J.; Taylor, George A. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States)

    2005-04-01

    The purpose of this manuscript is to provide an overview of the normal development of the pancreas as well as pancreatic pathology in children. Diagnostic imaging plays a major role in the evaluation of the pancreas in infants and children. Familiarity with the range of normal appearance and the diseases that commonly affect this gland is important for the accurate and timely diagnosis of pancreatic disorders in the pediatric population. Normal embryology is discussed, as are the most common congenital anomalies that occur as a result of aberrant development during embryology. These include pancreas divisum, annular pancreas, agenesis of the dorsal pancreatic anlagen and ectopic pancreatic tissue. Syndromes that can manifest pancreatic pathology include: Beckwith Wiedemann syndrome, von Hippel-Lindau disease and autosomal dominant polycystic kidney disease. Children and adults with cystic fibrosis and Shwachman-Diamond syndrome frequently present with pancreatic insufficiency. Trauma is the most common cause of pancreatitis in children. In younger children, unexplained pancreatic injury must always alert the radiologist to potential child abuse. Pancreatic pseudocysts are a complication of trauma, but can also be seen in the setting of acute or chronic pancreatitis from other causes. Primary pancreatic neoplasms are rare in children and are divided into exocrine tumors such as pancreatoblastoma and adenocarcinoma and into endocrine or islet cell tumors. Islet cell tumors are classified as functioning (insulinoma, gastrinoma, VIPoma and glucagonoma) and nonfunctioning tumors. Solid-cystic papillary tumor is probably the most common pancreatic tumor in Asian children. Although quite rare, secondary tumors of the pancreas can be associated with certain primary malignancies. (orig.)

  1. Development of hemipenes in the ball python snake Python regius.

    Science.gov (United States)

    Leal, Francisca; Cohn, Martin J

    2015-01-01

    Within amniotes, external copulatory organs have undergone extensive morphological diversification. One of the most extreme examples is squamate (lizards and snakes) hemipenes, which are paired copulatory organs that extend from the lateral margins of the cloaca. Here, we describe the development of hemipenes in a basal snake, the ball python (Python regius). Snake hemipenes arise as a pair of lateral swellings on either side of the caudal part of the cloaca, and these paired outgrowths persist to form the left and right hemipenes. In non-squamate amniotes, external genitalia form from paired swellings that arise on the anterior side of the cloaca, which then fuse medially to form a single genital tubercle, the anlagen of the penis or clitoris. Whereas in non-squamate amniotes, Sonic hedgehog (Shh)-expressing cells of the cloacal endoderm form the urethral or sulcus epithelium and are required for phallus outgrowth, the hemipenes of squamates lack an endodermal contribution, and the sulcus does not express Shh. Thus, snake hemipenes differ from the genital tubercles of non-squamate amniotes both in their embryonic origins and in at least part of patterning mechanisms, which raises the possibility that hemipenes may not be direct homologs of the unpaired amniote penis. Nonetheless, we find that some developmental genes show similar expression patterns in snake hemipenes buds and non-squamate genital tubercles, suggesting that homologous developmental mechanisms are involved in aspects of external genital development across amniotes, even when these structures may have different developmental origins and may have arisen independently during evolution.

  2. Cartilage-selective genes identified in genome-scale analysis of non-cartilage and cartilage gene expression

    Directory of Open Access Journals (Sweden)

    Cohn Zachary A

    2007-06-01

    Full Text Available Abstract Background Cartilage plays a fundamental role in the development of the human skeleton. Early in embryogenesis, mesenchymal cells condense and differentiate into chondrocytes to shape the early skeleton. Subsequently, the cartilage anlagen differentiate to form the growth plates, which are responsible for linear bone growth, and the articular chondrocytes, which facilitate joint function. However, despite the multiplicity of roles of cartilage during human fetal life, surprisingly little is known about its transcriptome. To address this, a whole genome microarray expression profile was generated using RNA isolated from 18–22 week human distal femur fetal cartilage and compared with a database of control normal human tissues aggregated at UCLA, termed Celsius. Results 161 cartilage-selective genes were identified, defined as genes significantly expressed in cartilage with low expression and little variation across a panel of 34 non-cartilage tissues. Among these 161 genes were cartilage-specific genes such as cartilage collagen genes and 25 genes which have been associated with skeletal phenotypes in humans and/or mice. Many of the other cartilage-selective genes do not have established roles in cartilage or are novel, unannotated genes. Quantitative RT-PCR confirmed the unique pattern of gene expression observed by microarray analysis. Conclusion Defining the gene expression pattern for cartilage has identified new genes that may contribute to human skeletogenesis as well as provided further candidate genes for skeletal dysplasias. The data suggest that fetal cartilage is a complex and transcriptionally active tissue and demonstrate that the set of genes selectively expressed in the tissue has been greatly underestimated.

  3. Report on the research projects into the safety of nuclear power plants in operation sponsored by Federal Ministry of Economics and Labour. Period under report: 1 January - 30 June 2004

    International Nuclear Information System (INIS)

    2004-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Arbeit (BMWA) (Federal Ministry of Economics and Labour) sponsors research projects into the safety of nuclear power plants in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations and to the further development of safety technology. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWA, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The reports are published by the Research Management Division of GRS. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWA does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  4. Analysis of existing structure and emissions of wood combustion plants for the production of heat and electricity in Bavaria; Analyse der Bestandesstruktur und der Emissionen von Holzfeuerungsanlagen zur Erzeugung von Waerme und Strom in Bayern.

    Energy Technology Data Exchange (ETDEWEB)

    Joa, Bettina

    2014-07-01

    This work deals with the detailed analysis of the existing structure of all Bavarian wood burning plants for the generation of heat and electricity as well as the determination of the resulting emission emissions in 2013. The number of wood burning plants in the single-chamber fireplaces, wood central heating and wood-fired heating plants which are in operation in the year 2013 were determined, and how many plants are existing in the various areas like pellet stoves, traditional ovens, wood-burning fireplace, pellet central heating systems, wood chips central heating systems, fire-wood central heating systems, wood combined heat and power plant (electricity and heat) and wood power plants (heat). In addition, the regional distribution of the wood burning plants in the Bavarian governmental districts is investigated as well as the type and amount of energy produced by them (heat, electricity). [German] Diese Arbeit behandelt die detaillierte Analyse der Bestandesstruktur saemtlicher bayerischer Holzfeuerungsanlagen zur Erzeugung von Waerme und Strom sowie die Ermittlung des dabei entstehenden Emissionsausstosses im Jahr 2013. Dabei wurde ermittelt wie viele Holzfeuerungsanlagen in den Segmenten Einzelraumfeuerstaetten, Holz-Zentralheizungen und Holzheiz(kraft)werke im Jahr 2013 in Bayern in Betrieb sind und wie viele Anlagen es in den einzelnen Bereichen Pelletoefen, traditionelle Oefen, Kaminoefen, Heizkamine, offene Kamine, Kacheloefen, Pellet-Zentralheizungen, Hackschnitzel-Zentralheizungen, Scheitholz-Zentralheizungen, Holzheizkraftwerke (Waerme und Strom), Holzheizwerke (Waerme) sowie Holzkraftwerke (Strom) gibt. Des Weiteren wird die regionale Verteilung der Holzfeuerungsanlagen in den bayerischen Regierungsbezirken erforscht sowie die durch sie produzierte Art und Menge an Energie (Waerme, Strom).

  5. VDE-specification for electrical equipment and apparatus in atmospheres endangered by explosive material. Draft. VDE-Bestimmung fuer elektrische Anlagen und deren Betriebsmittel in explosivgefaehrdeten Bereichen. Entwurf

    Energy Technology Data Exchange (ETDEWEB)

    1976-02-01

    These specifications are valid for the setting-up, changing, putting into operation and developing of electrical equipment, as well as for the application of electrical apparatus in such systems and in regions endangered by explosive materials.

  6. Hazards of ionizing radiations for human beings and environment with respect to nuclear facilities; Gefahren ionisierender Strahlung fuer Mensch und Umwelt in Bezug auf kerntechnische Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Huebner, Felix; Jung, Jennifer Jana; Schultmann, Frank

    2017-03-15

    Worldwide, nuclear fission is used to produce electricity. On the one hand, the low emission of CO{sub 2} is often mentioned as an advantage of this technology. On the other hand, warnings about the dangers of nuclear fission are mentioned. Consequently, an overview about the dangers of ionizing radiation to human beings as well as animals and the environment is important. However, the focus will be on possible health effects for humans with regards to nuclear power plants. In nuclear power plants, both natural types of radiation and artificially produced radiation occur. During normal operation, it is possible that small quantities of this ionizing radiation are released to the environment. In case of nuclear disasters or faults during decommissioning and dismantling processes the consequences of thereby emitted quantities can be even more severe. Reference nuclides vary by reactor type, operating stage and respective incident. At the beginning, different types of radiation and their characteristics and effects on the affected organism are explained. Sensitive organs are emphasized in this context. The individual risk is determined by numerous factors and therefore cannot be predicted. Based on scientific studies and medical publications the hazards of ionizing radiation are compiled. Effects of high exposure of ionizing radiation are well-investigated. Scientists are still divided over the connection between several diseases and the exposure to low doses of ionizing radiation. For this reason, the positions of different international organizations are critically contrasted in this study.

  7. Status report on compact gasifier cogeneration units in Germany. Applications of the cogeneration gasifier technology; Stand kleintechnischer Vergaser-BHKW-Anlagen in Deutschland. Einsatz der BHKW-Vergasertechnologie

    Energy Technology Data Exchange (ETDEWEB)

    Zschunke, Tobias; Schuessler, Ingmar; Salomo, Bert [Hochschule Zittau/Goerlitz (Germany); Braekow, Dieter [Foerdergesellschaft Erneuerbare Energien e.V., Berlin (Germany); Treppe, Konrad [Technische Univ. Dresden (Germany). Inst. fuer Verfahrenstechnik und Umwelttechnik

    2010-07-01

    In contrast to biogas, the use of solid biomass with low water content in cogeneration units is lagging several years of development behind. A promising variant is a wood gas engine cogeneration unit. Different energy sources can be combined, e.g. in an Otto engine and a Stirling engine. The authors describe the technology for compact systems. (orig.)

  8. Economic evaluation. Evaluation of the economic potentials of energy efficient plants and machines. Brief study; Wirtschaftlichkeitsbewertung. Bewertung der wirtschaftlichen Potenziale von energieeffizienten Anlagen und Maschinen. Kurzstudie

    Energy Technology Data Exchange (ETDEWEB)

    Mattes, Katharina; Schroeter, Marcus

    2011-08-15

    Energy efficiency and resource efficiency is a strategically important issue for the industry, economy and science. This issue is stimulated especially by political objectives and regulations for efficiency measures, shortage and increases in prices of raw materials as well as the demand for low costs of production in order to obtain the compatibility. In light of the increasing costs it is important to know which potentials of energy saving in the production do exist, how these potentials can be determined, and which measures for the evaluation do exist in the exploration of the potentials. The contribution under consideration is applied to these questions.

  9. Releases of 14CO2 from nuclear facilities with gaseous effluents; Die Emission von 14C02 mit der Abluft kerntechnischer Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schuettelkopf, H.

    1977-06-01

    Since only little information is available about the extent and type of the 14C emission from nuclear facilities, the Radiation Protection and Safety Department of the Karlsruhe Nuclear Research Center has measured the 14C stack vent emission from various facilities. The measurement was restricted to 14CO2 because it is only this coumpound which can lead to exposure doses as a result of ingestion and inhalation. Sampling was carried out with 200 ml of 5 M NaOH in a scrubber. The sample flow was 1 l/min. The sampling period was one week. The 14CO2 emission was measured in the stack vent air of the FR-2 research reactor, the Multi-purpose Research Reactor (MZFR), the combustion facility for burnable radioactive waste (FERAB), the Karlsruhe Reprocessing Plant (WAK), all of which are located on the premises of the Karlsruhe Nuclear Research Center, and in the exhaust air of the Obrigheim (KWO) and Biblis A Nuclear Power Stations.

  10. Strategically oriented management and controlling of resource intensive projects; Strategieorientiertes Management und Controlling ressourcenintensiver Projekte. Fallstudienanalyse und Konzeption eines Referenzmodells zum Projektmanagement der Stilllegung kerntechnischer Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Kemmeter, Sascha

    2015-07-01

    The book on strategically oriented management and controlling of resource intensive projects covers the following issues: frame of project management and project controlling, classification of the decommissioning of nuclear facilities as resource intensive projects, research design for case studies, results of the study of project management specific characteristics of decommissioning, reference model for the project management of nuclear facility decommissioning.

  11. Development of probabilistic methods for safety assessment of nuclear power plants; Weiterentwicklung probabilistischer Methoden zur Sicherheitsbeurteilung von Kernkraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Balfanz, H.P. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany); Boehme, E. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany); Fuhrmann, C. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany); Musekamp, W. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany); Neumann, L. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany); Rumpf, J. [Technischer Ueberwachungs-Verein Norddeutschland e.V., Hamburg (Germany)

    1997-07-01

    unmittelbaren Ereignisbewertung einzusetzen. Die Diskussion mit Kraftwerksbetreibern zur Umsetzung dieses Konzeptes im Anlagenbetrieb wird fortgesetzt. Eine entsprechende Uebernahme dieses Ansatzes in den PSA-Leitfaden haben wir ebenfalls empfohlen. Organisations- und Managementfaktoren haben gleichermassen einen signifikanten Einfluss auf Unfallablaeufe. Dies zeigen Erfahrungen in unterschiedlichsten Industriebereichen. Da diese Faktoren explizit nicht messbar sind, finden sie in der heute ueblichen PSA keine Anwendung. Zur Bewertung und Beeinflussung dieser risikorelevanten Faktoren sind bereits umfangreiche Entwicklungsarbeiten durchgefuehrt worden. Diese Arbeiten zeigen die Bedeutung der gezielten Auswertung von Betriebserfahrungen und von Unfallablaeufen unter dem besonderen Aspekt der `Root-Cause`-Analyse auf. In diesem Rahmen koennen auch Defizite in der Organisation und im Management aufgezeigt werden. Durch eine intensive Einbindung des Kraftwerkspersonals in diesen Analyseprozess koennen derartige Defizite abgebaut werden. (orig./DG)

  12. International technical assistance example. Consortium action in Bulgaria

    International Nuclear Information System (INIS)

    Mattei, J.M.; Milhem, J.L.

    1993-03-01

    The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria's electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom

  13. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Technology. Period: 1 January - 30 June, 2002

    International Nuclear Information System (INIS)

    2002-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technologie (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order to the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Managment Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.) [de

  14. Progress report within the series of GRS-F progress reports on reactor safety, sponsored by the Federal Ministry of Economics and Technology. Period: 1 July - 31 December 2001

    International Nuclear Information System (INIS)

    2002-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technologie (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order to the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Managment Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.) [de

  15. Research projects into the safety of nuclear power plants. Period cover 01. January - 30. June 2017. Progress report

    International Nuclear Information System (INIS)

    2017-01-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fur Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to the topic areas of reactor safety research. The reports are arranged in sequence of their project numbers. Ilt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  16. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Technology of the Federal Republic of Germany. Reporting period 2005. Progress report

    International Nuclear Information System (INIS)

    2005-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  17. Annual report on reactor safety research projects. Reporting period 2011. Progress report

    International Nuclear Information System (INIS)

    2011-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS)mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRSF- Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  18. Annual report on reactor safety research projects. Reporting period 2014. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the lnternet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. lt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  19. Annual report on reactor safety research projects. Reporting period 2013. Progress report

    International Nuclear Information System (INIS)

    2013-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS)mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRSF- Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  20. FoxA4 favours notochord formation by inhibiting contiguous mesodermal fates and restricts anterior neural development in Xenopus embryos.

    Directory of Open Access Journals (Sweden)

    Sabrina Murgan

    Full Text Available In vertebrates, the embryonic dorsal midline is a crucial signalling centre that patterns the surrounding tissues during development. Members of the FoxA subfamily of transcription factors are expressed in the structures that compose this centre. Foxa2 is essential for dorsal midline development in mammals, since knock-out mouse embryos lack a definitive node, notochord and floor plate. The related gene foxA4 is only present in amphibians. Expression begins in the blastula -chordin and -noggin expressing centre (BCNE and is later restricted to the dorsal midline derivatives of the Spemann's organiser. It was suggested that the early functions of mammalian foxa2 are carried out by foxA4 in frogs, but functional experiments were needed to test this hypothesis. Here, we show that some important dorsal midline functions of mammalian foxa2 are exerted by foxA4 in Xenopus. We provide new evidence that the latter prevents the respecification of dorsal midline precursors towards contiguous fates, inhibiting prechordal and paraxial mesoderm development in favour of the notochord. In addition, we show that foxA4 is required for the correct regionalisation and maintenance of the central nervous system. FoxA4 participates in constraining the prospective rostral forebrain territory during neural specification and is necessary for the correct segregation of the most anterior ectodermal derivatives, such as the cement gland and the pituitary anlagen. Moreover, the early expression of foxA4 in the BCNE (which contains precursors of the whole forebrain and most of the midbrain and hindbrain is directly required to restrict anterior neural development.

  1. Annual report on reactor safety research projects. Reporting period 2015. Progress report

    International Nuclear Information System (INIS)

    2015-01-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft tor Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are ·' prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/Authority Support Division of GRS. The reports as of the year 2000 are available in the lnternet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. it has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  2. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Technology of the Federal Republic of Germany. Reporting period 2007. Progress report

    International Nuclear Information System (INIS)

    2007-01-01

    Within its competence for energy research the Federal Ministry of Economics and Technology (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Research Management Division of GRS. The reports as of the year 2000 are available in the Internet-based information system on results and data of reactor safety research (http://www.grs-fbw.de). The compilation of the reports is classified according to the classification system 'Joint Safety Research Index (JSRI)'. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  3. Hot gas filtration: Investigations to remove gaseous pollutant components out of flue gas during hot gas filtration. Final report; HGR: Untersuchung zur Minimierung von gasfoermigen Schadstoffen aus Rauchgasen bei der Heissgasfiltration. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Christ, A; Gross, R; Renz, U

    1998-07-01

    Power plants with gas and steam turbines in pressurized fluidized bed or pressurized gasification processes enable power generation of coal with high efficiency and little emissions. To run these plants the cleaning of the flue gas is necessary before entering the turbines under the conditions of high temperature and pressure. Ceramic filter elements are the most probable method for hot gas cleaning. A simultaneous reduction of gaseous pollutant components under these conditions could help to make the whole process more efficient. The aim of the project is to integrate the catalytic reduction of carbon monoxide, hydrocarbons and nitric oxides into the hot gas filtration with ceramic filter elements as a one step mecanism. The project is focused on: - the catalytic behaviour of ferruginous ashes of brown coal, - the effectiveness of calcinated aluminates as a catalyst to remove uncombusted hydrocarbons in a hot gas filtration unit, - numerical simulation of the combined removal of particles and gaseous pollutant components out of the flue gas. (orig.) [Deutsch] Gas- und Dampfturbinen-Kraftwerke mit Druckwirbelschicht- oder mit Druckvergasungsverfahren ermoeglichen die Verstromung von Kohle mit hohem Wirkungsgrad und niedrigen Emissionen. Eine Voraussetzung fuer den Betrieb dieser Anlagen ist die Entstaubung der Rauchgase bei hohen Temperaturen und Druecken. Abreinigungsfilter mit keramischen Elementen werden dazu eingesetzt. Eine Reduzierung gasfoermiger Schadstoffe unter den gleichen Bedingungen koennte die Rauchgaswaesche ersetzen. Ziel des Gesamtvorhabens ist es, die Integration von Heissgasfiltration und katalytischem Abbau der Schadstoffe Kohlenmonoxid, Kohlenwasserstoffe und Stickoxide in einem Verfahrensschritt zu untersuchen. Die Arbeitsschwerpunkte dieses Teilvorhabens betreffen - die katalytische Wirkung eisenhaltiger Braunkohlenaschen, - die Wirksamkeit des Calciumaluminats als Katalysator des Abbaus unverbrannter Kohlenwasserstoffe im Heissgasfilter

  4. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2004. Progress report

    International Nuclear Information System (INIS)

    2004-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  5. Research projects into the safety of nuclear power plants. Period covered: 01. July - 31. Dezember 2004. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum: 01. Juli - 31. Dezember 2004. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  6. Von Roll RCP method - first experiences; Von Roll RCP - Verfahren. Erste Erfahrungen

    Energy Technology Data Exchange (ETDEWEB)

    Capitaine, P.; Engweiler, J. [Roll Umwelttechnik AG, Zuerich (Switzerland)

    1998-09-01

    The RCP method was designed as a residue-optimised alternative to the thermally optimised grate firing of residual wastes. Its technical realisation and development to market maturity took no more than 5 years. In the first process stage the waste is converted to high-carbon pyrolysis charcoal and high-rank gas in the absence of oxygen. In the second stage these substances are oxidised by addition of oxygen. The resulting temperature causes the non-combustible constituents of the slag to melt. In a third, optional, stage this molten slag can be liberated of (heavy) metals to such an extent that it can subsequently be used directly as additive for grinding. Further exhaust gas treatment is facilitated by the use of a circulatory fluidised-bed secondary combustion chamber. Despite the reduced flue gas volume and resultant higher pollutant concentrations in the crude gas, overall emissions are lower than in conventional plants. [Deutsch] Das reststoffoptimierte RCP Verfahren ist als Alternative zur thermisch optimierten Rostverbrennung von Restabfaellen konzipiert. In nur fuenf Jahren wurde das Verfahren technisch umgesetzt und zur Marktreife entwickelt. In einer ersten Stufe des Verfahrens wird der Abfall unter Luftabschluss in einen kohlenstoffreichen Pyrolysekoks und eine heizwertreiches Gas umgesetzt. Im zweiten Schritt werden diese Stoffe unter Zugabe von Sauerstoff oxidiert. Dabei treten Temperaturen auf, bei denen die nichtbrennbaren Bestandteile der Schlacke schmelzen. Optional wird diese Schmelzschlacke in einem dritten Schritt derart von (Schwer-) Metallen befreit, dass sie anschliessend direkt als Zement-Zumahlstoff eingesetzt werden kann. Die Nutzung der zirkulierenden Wirbelschicht - Nachbrennkammer zur Abgasbehandlung vereinfacht die weitergehende Abgasbehandlung. Trotz verringertem Rauchgasvolumen und damit hoeheren Schadstoffkonzentrationen im Rohgas werden die Gesamtemissionen gegenueber konventionellen Anlagen verringert. (orig./SR)

  7. A fast running method for predicting the efficiency of core melt spreading for application in ASTEC

    International Nuclear Information System (INIS)

    Spengler, C.

    2010-01-01

    The integral Accident Source Term Evaluation Code (ASTEC) is jointly developed by the French Institut de Radioprotection et de Surete Nucleaire (IRSN) and the German Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH to simulate the complete scenario of a hypothetical severe accident in a nuclear light water reactor, from the initial event until the possible radiological release of fission products out of the containment. In the frame of the new series of ASTEC V2 versions appropriate model extensions to the European Pressurised Water Reactor (EPR) are under development. With view to assessing with ASTEC the proper operation of the ex-vessel melt retention and coolability concept of the EPR with regard to melt spreading an approximation of the area finally covered by the corium and of the distance run by the corium front before freezing is required. A necessary capability of ASTEC is in a first step to identify such boundary cases, for which there is a potential that the melt will freeze before the spreading area is completely filled. This paper presents a fast running method for estimating the final extent of the area covered with melt on which a simplified criterion in ASTEC for detecting such boundary cases will be based. If a boundary case is detected the application of a more-detailed method might be necessary to assess further the consequences for the accident sequence. The major objective here is to provide a reliable method for estimating the final result of the spreading and not to provide highly detailed methods to simulate the dynamics of the transient process. (orig.)

  8. Application profile and requirements on fuel cell heat-and-power stations; Einsatzprofil und Anforderungen an Brennstoffzellen-HKW

    Energy Technology Data Exchange (ETDEWEB)

    Kruhl, J

    1999-12-31

    In centralized power supply systems, maximum electrical efficiency is required in order to achieve competitiveness with high-efficiency combined-cycle systems. Combined systems of high-temperature fuel cells (MCFC/SOFC) with integrated gas or steam turbine processes are a promising option. In decentralized power supply, low-temperature and medium-temperature fuel cells (PEMFC/PAFC) may be feasible as well provided that the temperature characteristic of the demand side permits the use of the heat generated. In view of the decreasing heat demand of classic cogeneration structures, costly district heating will in the long run be replaced by building-specific cogeneration solutions. In this field, high-efficiency fuel cell systems have advantages over small-scale cogeneration units. If power-specific investments are low, the new technology may be more favourable than separate supply systems with networks and heating boilers and, in consequence, may gain wider acceptance. (orig.) [Deutsch] In der zentralen Stromerzeugung erfordert der Wettbewerb mit hocheffizienten GuD-Anlagen die Maximierung des elektrischen Wirkungsgrades. Hierzu bieten sich Kombianlagen aus Hochtemperatur-Brennstoffzellen (MCFC/SOFC) mit integrierten Dampf- bzw. Gasturbinen-Prozessen an. Im dezentralen Versorgungsbereich bieten zusaetzlich Nieder- und Mitteltemperatur-Brennstoffzellen (PEMFC/PAFC) ein hohes Einsatzpotential, sofern die Temperaturcharakteristik des Bedarfs eine Nutzbarkeit der entstehenden Waerme zulaesst. Unter dem Aspekt des zukuenftig sinkenden Waermebedarfs klassischer KWK-Strukturen wird die kostenintensive Nahwaermeversorgung zunehmend durch gebaeudespezifische KWK-Loesungen verdraengt werden. In diesem Bereich bieten hocheffiziente Brennstoffzellen-Systeme deutliche Vorteile gegenueber motorischen Klein-BHKW. Werden hier geringe leistungsspezifische Investitionen erreicht, kann eine Wirtschaftlichkeit gegenueber der getrennten Versorgung durch Netz und Heizkessel gegeben sein

  9. Annual report on reactor safety research projects sponsored by the Ministry of Economics and Labour of the Federal Republic of Germany. Reporting period 2004. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  10. Modelling of void formation in the subcooled boiling regime in the ATHLET code to simulate flow instability for research reactors

    International Nuclear Information System (INIS)

    Hainoun, A.

    1996-01-01

    The ATHLET thermohydraulic code was developed at the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS, Society for Plant and Reactor Safety) to analyse leaks and transients for power reactors. In order to extend the code's range of application to the safety analysis of research reactors, a model was implemented permitting a description of the thermodynamic non-equilibrium effects in the subcooled boiling regime. The aim of the extension is, on one hand, to cover the thermohydraulic instability which is particularly characteristic of research reactors owing to their high power densities and low system pressures and, on the other hand, to provide a consideration of the influence of the steam formed in this boiling regime on the neutron balance. The model developed takes into consideration the competing evaporation and condensation effects in the subcooled boiling regime. It describes the bubble production rate at the superheated heating surfaces as well as the subsequent condensation of the bubbles in the subcooled core flow. The installed model is validated by the recalculation of two extensive series of experiments. In the first series the McMaster experiments on axial void distribution in the subcooled boiling regime are recalculated. The recalculation shows that the extended programme is capable of calculating the axial void distribution in the subcooled boiling regime with good agreement with the data. The second series deals with KFA experiments on thermohydraulic instability (flow excursion) in the subcooled boiling regime, comprising a broad parameter range of heat flow density, inlet temperature and channel width. Recalculation of this experimental series shows that the programme extension ensures simulation of thermohydraulic instability. (orig.)

  11. Data compilation and evaluation of U(IV) and U(VI) for thermodynamic reference database THEREDA

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Anke; Bok, Frank; Brendler, Vinzenz

    2015-07-01

    THEREDA (Thermodynamic Reference Database) is a collaborative project, which has been addressed this challenge. The partners are Helmholtz-Zentrum Dresden-Rossendorf, Karlsruhe Institute of Technology (KIT-INE), Gesellschaft fuer Anlagen- und Reaktorsicherheit Braunschweig mbH (GRS), TU Bergakademie Freiberg (TUBAF) and AF-Consult Switzerland AG (Baden, Switzerland). The aim of the project is the establishment of a consistent and quality assured database for all safety relevant elements, temperature and pressure ranges, with its focus on saline systems. This implied the use of the Pitzer approach to compute activity coefficients suitable for such conditions. Data access is possible via commonly available internet browsers under the address http://www.thereda.de. One part of the project - the data collection and evaluation for uranium - was a task of the Helmholtz-Zentrum Dresden-Rossendorf. The aquatic chemistry and thermodynamics of U(VI) and U(IV) is of great importance for geochemical modelling in repository-relevant systems. The OECD/NEA Thermochemical Database (NEA TDB) compilation is the major source for thermodynamic data of the aqueous and solid uranium species, even though this data selection does not utilize the Pitzer model for the ionic strength effect correction. As a result of the very stringent quality demands, the NEA TDB is rather restrictive and therefore incomplete for extensive modelling calculations of real systems. Therefore, the THEREDA compilation includes additional thermodynamic data of solid secondary phases formed in the waste material, the backfill and the host rock, though falling into quality assessment (QA) categories of lower accuracy. The data review process prefers log K values from solubility experiments (if available) to those calculated from thermochemical data.

  12. Research projects into the safety of nuclear power plants. Period cover 01. January - 30. June 2017. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum 01. Januar - 30. Juni 2017. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fur Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to the topic areas of reactor safety research. The reports are arranged in sequence of their project numbers. Ilt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  13. IPSN international activities in 1999; Les activites internationales de l'IPSN en 1999

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2000-09-01

    This article is a reprint of a chapter taken from the 1999 activity report of the French Institute of Nuclear Protection and Safety (IPSN) and devoted to the international activities of the IPSN, in particular the cooperation of IPSN with its German homologue GRS (Gesellschaft fuer Anlagen und Reaktorsicherheit): assistance to Eastern Europe countries (development of regulation and constitution of safety files in Ukraine, transfer of computer codes and training, safety evaluation of the Mochvce nuclear power plant in Slovakia, reduction of the risks generated by the Tchernobyl shelter, assistance for the decommissioning of the Tchernobyl power plant, analysis of improvements proposed for the Medzamor unit 2 of Armenia, evaluation of fire hazard risks, assistance to Lithuania for the licensing of the Ignalina 1 unit); cooperation with China; international cooperation about the methods and tools for crisis management; international collaboration about IPSN's serious accident codes; extension of cooperation with Japan in radiation protection and radio-ecology; nuclear safety exercises in Russia and Armenia; development of Russia's national control of nuclear materials; collaboration with the medical radiological research center of Obninsk (Russia); radiation protection assistance in Turkey after a source accident; neutron measurements at the Vandellos 2 power plant (Spain); European intercomparison of neutron dosimetry; international intercomparison of uranium dosimetry in urines; participation to European research programs; construction of a database about the Tchernobyl accident consequences; organization of the Eurosafe European forum on the safety of nuclear facilities; development and validation of the Astec computer code for the simulation of nuclear accidents; evaluation report concerning the French-German EPR reactor project. (J.S.)

  14. Technologies for the commercial energetic utilisation of waste wood and used wood; Technologien zur energetischen Nutzung von Holzabfaellen und Gebrauchsholz im gewerblichen Bereich

    Energy Technology Data Exchange (ETDEWEB)

    Marutzky, R.

    1998-12-31

    Due to the frequent contamination of wood with wood preservatives, coatings, adhesives, paints and other non-wood materials the conversion of production residues and various types of used wood to energy appears to be fraught with problems. However, extensive studies conducted during the past years have shown that most problems regarding combustion residues and emissions have been overestimated. Thanks to new technologies it is now possible to avoid or at least reduce the formation of pollutants during combustion of even complexly contaminated waste wood. Environmentally acceptable combustion of wood presupposes complete combustion, effective dedusting, and primary measures for nitrogen oxide control. Depending on the type of feedstock and the relevant emission limit values one may optionally include secondary nitric oxides removal measures and control techniques for partially volatile heavy metals and halocarbons. Moreover, firing plants must be so conditioned as to keep the new synthesis of dioxins at a low level. [Deutsch] Die energetische Verwertung von Produktionsabfaellen und Gebrauchtholzsortimenten scheint wegen der haeufig vorhandenen Belastung der Hoelzer mit Holzschutzmitteln, Oberflaechenbeschichtungen, Klebstoffen, Farbanstrichen und andere holzfremden Bestandteilen schwierig zu sein. Tatsaechlich sind - wie umfangreiche Untersuchungen der letzten Jahre gezeigt haben - die meisten Probleme in Hinblick auf Ausbrand und Emissionen ueberschaetzt worden. Durch Weiterentwicklung von Anlagen- und Regelungstechnik ist es heute moeglich, die Schadstoffbildung bei der Verbrennung auch komplex belasteter Holzabfaelle zu vermeiden oder zu vermindern. Voraussetzungen einer umweltvertraeglichen Verbrennung von Holz sind - ein guter Ausbrand, - eine effektive Entstaubung, - und primaere Massnahmen der Stickstoffoxidminderung. Optional kommen je nach Brennstoff und Emissionsgrenzwert noch sekundaere Entstickungsmassnahmen und Minderungstechniken fuer partiell

  15. Gasification of secondary fuels in a circulating fluidized bed for energetic use in cement production; Vergasung von Sekundaerbrennstoffen in der zirkulierenden Wirbelschicht zur energetischen Nutzung fuer die Zementherstellung

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, J; Gafron, B [Lurgi Umwelt GmbH, Frankfurt am Main (Germany); Scur, P; Wirthwein, R [Ruedersdorfer Zement GmbH (Germany)

    1998-09-01

    Ruedersforf cement factory was commissioned a century ago as one of the first in Germany. After the plant was taken over by Readymix AG, a comprehensive sanitation concept was carried through. The plant has a production capacity of 8000 t/d of cement clinkers which are produced in a new kiln with a capacity of 6000 t/d and two modernized kilns each with a capacity of 1000 t/d. Reduction of energy consumption was the main goal of modernisation, with fuel gas generation in a circulating fluidized bed as a key element. The unit provides 40 % of the energy consumed by the clinker production process and is also used for selective ash production up to 25 t/h. The ash is used as a raw material for cement production. (orig./SR) [Deutsch] Bereits vor 100 Jahren wurde eine der ersten Zementfabriken in Deutschland am Standort Ruedersdorf in Betrieb genommen. Zum Erhalt der Wettbewerbsfaehigkeit wurde nach der Uebernahme des Werkes Ruedersdorf durch die Readymix AG ein umfangreiches Sanierungskonzept in die Wege geleitet. Bei einer Produktionskapazitaet von ca. 8 000 t Klinker pro Tag werden eine neue Ofenanlage mit einer Kapazitaet von 6 000 t/Tag sowie 2 sanierte kleine Anlagen zu je 1000 t/Tag betrieben. In der neuen Ofenanlage werden alle Moeglichkeiten genutzt, den Energiebedarf fuer die Klinkerproduktion zu senken. Eine wesentliche neue innovative Komponente ist dabei eine Brenngaserzeugung in einer Zirkulierenden Wirbelschicht, ueber die im folgenden berichtet werden soll. Die Anlage kann bis zu 40% des Energiebedarfes des Zementprozesses liefern. Weiterhin wird mit der ZWS eine gezielte Ascheproduktion, bis zu 25 t/h, betrieben. Diese Aschen sind Teil der Rohstoffrezeptur an der Rohmuehle. (orig./SR)

  16. Characterization of the chromosomal inversion associated with the Koa mutation in the mouse revealed the cause of skeletal abnormalities

    Directory of Open Access Journals (Sweden)

    Suzuki Hiroetsu

    2009-09-01

    Full Text Available Abstract Background Koala (Koa is a dominant mutation in mice causing bushy muzzle and pinna, and is associated with a chromosomal inversion on the distal half of chromosome 15. To identify the gene responsible for the Koa phenotypes, we investigated phenotypes of Koa homozygous mice and determined the breakpoints of the inversion with a genetic method using recombination between two different chromosomal inversions. Results Skeletal preparation of Koa homozygotes showed marked deformity of the ribs and a wider skull with extended zygomatic arches, in addition to a general reduction in the lengths of long bones. They also had open eyelids at birth caused by a defect in the extension of eyelid anlagen during the embryonic stages. The proximal and distal breakpoints of the Koa inversion were determined to be 0.8-Mb distal to the Trsps1 gene and to 0.1-Mb distal to the Hoxc4 gene, respectively, as previously reported. The phenotypes of mice with the recombinant inverted chromosomes revealed the localization of the gene responsible the Koa phenotype in the vicinity of the proximal recombinant breakpoint. Expression of the Trsps1 gene in this region was significantly reduced in the Koa homozygous and heterozygous embryos. Conclusion While no gene was disrupted by the chromosomal inversion, an association between the Koa phenotype and the proximal recombinant breakpoint, phenotypic similarities with Trps1-deficient mice or human patients with TRSP1 mutations, and the reduced expression of the Trsps1 gene in Koa mice, indicated that the phenotypes of the Koa mice are caused by the altered expression of the Trps1 gene.

  17. Data compilation and evaluation of U(IV) and U(VI) for thermodynamic reference database THEREDA

    International Nuclear Information System (INIS)

    Richter, Anke; Bok, Frank; Brendler, Vinzenz

    2015-01-01

    THEREDA (Thermodynamic Reference Database) is a collaborative project, which has been addressed this challenge. The partners are Helmholtz-Zentrum Dresden-Rossendorf, Karlsruhe Institute of Technology (KIT-INE), Gesellschaft fuer Anlagen- und Reaktorsicherheit Braunschweig mbH (GRS), TU Bergakademie Freiberg (TUBAF) and AF-Consult Switzerland AG (Baden, Switzerland). The aim of the project is the establishment of a consistent and quality assured database for all safety relevant elements, temperature and pressure ranges, with its focus on saline systems. This implied the use of the Pitzer approach to compute activity coefficients suitable for such conditions. Data access is possible via commonly available internet browsers under the address http://www.thereda.de. One part of the project - the data collection and evaluation for uranium - was a task of the Helmholtz-Zentrum Dresden-Rossendorf. The aquatic chemistry and thermodynamics of U(VI) and U(IV) is of great importance for geochemical modelling in repository-relevant systems. The OECD/NEA Thermochemical Database (NEA TDB) compilation is the major source for thermodynamic data of the aqueous and solid uranium species, even though this data selection does not utilize the Pitzer model for the ionic strength effect correction. As a result of the very stringent quality demands, the NEA TDB is rather restrictive and therefore incomplete for extensive modelling calculations of real systems. Therefore, the THEREDA compilation includes additional thermodynamic data of solid secondary phases formed in the waste material, the backfill and the host rock, though falling into quality assessment (QA) categories of lower accuracy. The data review process prefers log K values from solubility experiments (if available) to those calculated from thermochemical data.

  18. International technical assistance example. Consortium action in Bulgaria; Exemple d`assistance internationale. Cas de la Bulgarie, action du consortium

    Energy Technology Data Exchange (ETDEWEB)

    Mattei, J M; Milhem, J L [CEA Centre d` Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire; Heuser, F W; Kelm, P [Gesellschaft fuer Reaktorsicherheit mbH (GRS), Koeln (Germany)

    1993-03-01

    The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria`s electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom.

  19. Research projects into the safety of nuclear power plants. Period covered: 01. July - 31. December 2004. Progress report

    International Nuclear Information System (INIS)

    2004-01-01

    Within its competence for energy research, the Bundesministerium fuer Wirtschaft und Technology (BMWi) (Federal Ministry of Economics and Technology) sponsors investigations into the safety of nuclear power plants. The objective of these investigations is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such investigations by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work and are published by the Research Management Division of GRS within the framework of general information on the progress in reactor safety research. The compilation of the reports is classified according to general topics related to reactor safety research. Further, use is made of the classification system 'Joint Safety Research Index' of the CEC (Commission of the European Communities). The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties. (orig.)

  20. High-efficiency absorption-type heat pumps and refrigerators. From topology to the pilot plant; Hocheffiziente Absorptionsmaschinen zur Versorgung mit Kaelte und Waerme. Von der Topologie zur Pilotanlage

    Energy Technology Data Exchange (ETDEWEB)

    Ziegler, F.; Demmel, S.; Lamp, P. [Bayerisches Zentrum fuer Angewandte Energieforschung e.V. (ZAE Bayern), Wuerzburg (Germany); Kahn, R. [Technische Univ. Muenchen (Germany). Physik Dept. E19; Alefeld, G.

    1998-12-31

    Absorption-type heat pumps or refrigerators are systems operated with heat. They have been known for a long time and are frequently used especially in airconditioning in the USA and south-east Asia. However, the conventional technique used is subject to many physical limitations, restricting their broader use. The paper demonstrates ways of overcoming these restrictions, for instance by multi-stage design. The exploitation of topological principles much facilitates the synthesis of novel circuits. The technical relevance of such developments is demonstrated by means of selected examples of executed laboratory and pilot plants. Modern absorption technology saves resources and prevents environmental pollution by consuming less fossil energy compared with the conventional technique, for instance by harnessing the thermal potential of solar energy or utilizing waste heat and residual heat, and, not least, thanks to the use of natural refrigerants. (orig.) [Deutsch] Absorptionswaermepumpen oder -kaeltemaschinen sind durch Waerme angetriebene Anlagen, die seit langem bekannt sind und besonders in der Klimatechnik in den USA und im suedostasiatischen Raum haeufig eingesetzt werden. Die dabei verwendete konventionelle Technik unterliegt allerdings vielfaeltigen physikalischen Einschraenkungen, die ihre noch breitere Anwendung verhindern. Es wird gezeigt, wie diese Einschraenkungen beispielsweise durch Mehrstufigkeit ueberwunden werden koennen. Durch die Verwendung topologischer Grundsaetze wird die Synthese neuartiger Kreislaeufe stark vereinfacht. Die technische Bedeutung solcher Entwicklungen wird an ausgewaehlten Beispielen ausgefuehrter Labor- und Pilotanlagen gezeigt. Durch den im Vergleich zu konventioneller Technik geringeren Verbrauch an fossiler Energie, beispielsweise durch die thermische Nutzung von Sonnenenergie oder durch die Nutzung von Ab- oder Restwaerme und nicht zuletzt durch die Verwendung natuerlicher Kaeltemittel werden bei Einsatz moderner

  1. Valve which can be remotely handled and operated, particularly for the hot area of radioactive plants. Fernhantierbare und fernbedienbare Armatur, insbesondere fuer den heissen Bereich radioaktiver Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Radovan, G.; Sandling, M.J.; Davidson, J.W.; Blaseck, K.; Hoffmeister, L.; Westendorf, H.

    1986-12-11

    The valve is built up so that one replacement part contains all the wear parts of the valve, while the non-wearing parts and particularly the valve housing are solidly connected to the pipeline. The replacement part and the valve housing are fixed on alternate sides by a clamp. The replacement part has a central screw which can be moved relative to the other components, which is supported in both axial directions in a clamp which can be opened. The replacement part can thus be pressed into the valve housing and pulled out of it.

  2. Future market relevance of CHP installations with electrical ratings from 1 to 1000 kW; Zukuenftige Marktbedeutung von WKK-Anlagen mit 1 - 1000 kW elektrischer Leistung

    Energy Technology Data Exchange (ETDEWEB)

    Eicher, H.; Rigassi, R.

    2003-12-15

    This report for the Swiss Federal Office of Energy (SFOE) discusses the future market relevance of combined heat and power (CHP) installations with electrical ratings from 1 to 1000 kW. Developments over the past ten years are reviewed. Important reductions in the price of motor-driven CHP units and the price of the electrical power produced are noted and commented on. The technical market potential of CHP units and the degree to which this potential has been implemented are commented on. Work done, including CHP implementation in the industrial, commercial and residential areas, is commented on. Future developments both in the technical area as well as in commercial areas are commented on. Micro-gas-turbine based CHP systems are also discussed, as are fuel-cell based systems in both the higher and lower capacity power generation area. The prospects for CHP systems in general in the electricity generation area are discussed

  3. Feasibility study for new ecolabels according to ISO 14024 (type I) within the product group: small cogeneration plants; Machbarkeitsstudie fuer neue Umweltzeichen in Anlehnung an ISO 14024 (Type I) fuer die Produktgruppe: Kleine Blockheizkraftwerk-Module

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, E.; Hirschl, B.; Kaliske, J. [Institut fuer Oekologische Wirtschaftsforschung (IOEW) gGmbH, Berlin (Germany); Reese, I.; Grimpe, T. [Hamburg Gas Consult (HGC) GmbH (Germany)

    2000-11-02

    available data, it is not possible at the moment to derive concrete criteria for an ecolabel in this field. After the introduction of initial products onto the market, corresponding requirements for plants based on this new technology should be specified. (orig.) [German] Beim vorliegenden Gutachten handelt es sich um eine Machbarkeitsstudie nach ISO 14024. Es behandelt die Frage, ob ein Umweltzeichen fuer kleine BHKW-Module gerechtfertigt ist, und welche Anforderungen diese im Vergabefall erfuellen sollten. Im Rahmen der Untersuchung wurde zunaechst eine umfassende Marktanalyse durchgefuehrt, um daraus die Anlagen zu identifizieren, die fuer ein Umweltzeichen in Frage kommen. Im Hauptteil der Studie ging es um die vertiefende Analyse der Umweltrelevanz der ausgewaehlten Anlagen. Hierzu wurde eine Herstellerbefragung durchgefuehrt und ausgeaehlte BHKW anhand eines Systemvergleiches mit Gas- und Oelheizkesseln verglichen. Auf der Basis dieser Analyse wurden Anforderungskataloge fuer Gas- und Diesel-BHKW-Module abgeleitet, die in einem Fachgespraech in einer breiten Runde von Experten und Herstellern vorgestellt und diskutiert wurden. Aus der Studie und dem Fachgespraech konnte ein deutliches Votum fuer ein Umweltzeichen fuer die untersuchten BHWK-Module abgeleitet werden. Die vorgeschlagenen Vergabegrundlagen umfassen Anforderungen an Richtlinienkonformitaet, rationelle Energienutzung (Elektrischer und Gesamtwirkungsgrad bei Nennlast und Teillast, Angabe des Hilfsstrombedarfes), Emissionswerte von CO, NO{sub x}, Staub und organischen Stoffen, Schallemissionen, Angebot von Wartungsvertraegen, Ruecknahmeverpflichtung sowie Anforderungen an die Bedienungsanleitung. Als moegliche Umschrift eines Zeichens fuer kleine BHKW-Module wird empfohlen: 'Umweltzeichen... weil energieefizient'. Neben motorischen BHKW wurden auch kleine Brennstoffzellen-BHKW untersucht. Diese befinden sich zur Zeit noch in einer Feldtest- und Erprobungsphase. Sie weisen deutliche oekologische

  4. Modeling of flow and mass transport processes in unsaturated soils in combination with technical facilities; Modellierung von Stroemungs- und Stofftransportprozessen bei Kombination der ungesaettigten Bodenzone mit technischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hasan, Issa

    2014-07-01

    The modelling of complex systems such as the underground is a means to describe the processes occurring in the reality. The conducting of experiments on a model to obtain qualitative evidence about a real system is referred to as a simulation. Thereby, various models (e.g. physical and mathematical models) can be used. The unsaturated zone (vadose zone) is the region between the land surface and the water table, in which the water content is less than full saturation, and the pressure is lower than the atmospheric pressure. The unsaturated zone is very significant for agriculture, geobiology, aerobic degradation processes and groundwater recharge. The processes of water flow and solute transport in the unsaturated zone can be described by means of numerical simulation programs. The aim of the present work is a comprehensive validation of the simulation program PCSiWaPro {sup registered} (developed at the TU-Dresden, Institute of Waste Management and Contaminated Site Treatment) for different applications. Another aim of this work is to investigate the applicability of the current version of PCSiWaPro {sup registered} for different cases of a combination between the unsaturated zone and technical facilities. Four application cases with different objectives were investigated within the present work, which are: the simulation of decentralized wastewater infiltration with corresponding column and field experiments, the computation of groundwater recharge by means of lysimeters, the water balance of earth dams and the modelling of landfill covering systems. The application cases differ from each other by the objective of the simulation, the geometry, the size, the specified initial and boundary conditions, the simulation time, the applied materials, the coordinate system, the input and output data. The simulation results clearly showed that PCSiWaPro {sup registered} is applicable for all investigated cases under consideration of different flow and solute transport regimes, parameters, boundary conditions, spatial and temporal discretization, and coordinate systems. The simulation results of the experimental soil columns for the decentralized treated wastewater infiltration case showed a very good agreement between measured and computed values of water and solute balance (pressure head, flow and solute concentration) of the investigated soil types B3 (slightly silty sand), B4 (coarse sand / gravel) and B5 (medium silty sand). The root of the mean squared error (RMSE) for the computation of the pressure head was 1,84 cm at B5, 3,61 cm at B3 and 1,27 cm at B4. The relative deviation in case of pressure head computation was 2,19 % at B5, 1,3 % at B3 and 5,3 % at B4. The implementation of the sensitivity analysis of the relevant parameters for the modelling showed a very high sensitivity of the VAN GENUCHTEN parameters and the saturated hydraulic conductivity of the soil. Moreover, the parameters according to DIN 4220 led to different results than the estimated ones according to pedotransfer methods based on sieve analysis. Within the project EGSIM, which was carried out at the Institute for waste management and contaminated sites treatment in collaboration with DUALIS GmbH IT Solution, the programs SENSIT and ISSOP were developed and used for parameter identification/calibration. The results obtained in this Work showed under which conditions is a secondary treatment of full biologically treated wastewater in the soil possible, so that no unallowable pollutants entry in the groundwater occurs. With regard to the field models of this application the implementation of the rotationally symmetric coordinate system should be considered as a condition and not as an option for a better corresponding to the reality. Furthermore, different scenarios of the field models were carried out with continuous and discontinuous infiltration, as well as under different initiation areas. PCSiWaPro {sup registered} could be applied for both unsaturated and variably-saturated porous media. This could be proven by the simulation of the water balance in an earth dam. The average relative deviation between measured and simulated water levels of the corresponding observation point in the investigated dam embankment was 0,08 % (corresponding to 5,8 cm at 70 m thickness) and the coefficient of determination (R{sup 2}) was 0,987. In general, the simulation of the water balance using PCSiWaPro {sup registered} of different landfill covering systems showed a successful draining of the falling rainwater (even under heavy rainfall). In addition, the implemented vegetation models have proven that the vegetation of the landfill surface can reduce the water content in the landfill by evapotranspiration and water uptake by roots. The water balance simulation results of the scenarios for the computation of groundwater recharge by means of lysimeters showed that the program is applicable for this case. The relative deviation of the simulated from the measured groundwater recharge rates occur due to the implemented material parameters as well as to the neglect of macro pores effects (dual porosity).

  5. Harnessing water power in the larger Hannover area. Study commissioned by the local administration union larger Hannover area; Nutzung der Wasserkraft im Grossraum Hannover. Eine Studie im Auftrag des Zweckverbandes Grossraum Hannover

    Energy Technology Data Exchange (ETDEWEB)

    Sahling, U [comp.

    1993-12-31

    Within the framework of an inventory of possible sites for hydroelectric power plants in the larger Hannover area, 60 sites in the rural district of Hannover were more closely investigated. 57 of these were former water mills and 3 were hydraulic structures that have nothing to do with former water mills. 29 water mills are to be considered as dismantled in hydraulic engineering terms, 8 are in operation, and 20 are decommissioned. Furthermore, 2 weirs and 1 barrage were included in the investigation.- In the area of the city of Hannover, there are four more sites of hydroelectric power plants, of which one is dismantled, two are decommissioned and one is in operation.- In order to complement the inventory, object expertises of different depths were prepared for eight selected sites. They permit a qualified assessment of the chances of reactivation of each site, taking the respective specific conditions into account. At the same time, they represent a first step towards detailed advice for a prospective operator (orig.). [Deutsch] Im Rahmen der Studie zur Bestandserhebung von moeglichen Standorten fuer Wasserkraftanlagen im Grossraum Hannover wurden 60 Standorte im Landkreis Hannover naeher untersucht. Es handelt sich um 57 ehemalige Wassermuehlen und 3 wasserbauliche Anlagen, die nichts mit ehemaligen Wassermuehlen zu tun haben. 29 Wassermuehlen sind im wasserbaulichen Sinn als beseitigt anzusehen, 8 sind in Betrieb, 20 liegen still. Darueberhinaus wurden 2 Wehre und 1 Stauanlage in die Untersuchungen einbezogen. Im Gebiet der Stadt Hannover befinden sich 4 weitere Wassrkraftstandorte, von denen einer als beseitigt anzusehen ist, zwei stilliegen und einer in Betrieb ist. Ergaenzend zu der Bestandserhebung wurden fuer acht ausgewaehlte Standorte Objektgutachten unterschiedlicher Bearbeitungstiefe erstellt. Sie ermoeglichen eine qualifizierte Beurteilung der Reaktivierungschancen unter Beruecksichtigung der jeweiligen standortspezifischen Besonderheiten

  6. Processing and physical utilisation of waste materials relevant to iron and steel manufacture; Aufarbeitung und stoffliche Nutzung eisen- und stahlrelevanter Abfallstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Harp, G.; Schmidt, B.; Sucker, D. [Betriebsforschungsinstitut VDEh-Institut fuer Angewandte Forschung GmbH, Duesseldorf (Germany)

    1998-09-01

    A part of the waste materials arising in iron and steel manufacture is utilised physically, either internally for the recovery of iron or externally for the production of cement and nonferrous metals. Most of these materials can be used without prior processing. Iron and steel-relevant waste materials which at present are still landfilled or disposed of as hazardous wastes are not immediately suitable for physical recycling as secondary raw material. These waste materials have to be processed without exception before they can be used again in the existing steel and iron manufacturing plants. The results of the authors` own studies have clearly shown that the cupola furnace is suited for the use of a wide variety of waste materials. [Deutsch] Ein Teil der bei der Eisen- und Stahlerzeugung anfallenden Abfallstoffe werden entweder intern zur Rueckgewinnung des Eisens oder extern in der Zement- bzw. Nichteisenmetallgewinnung stofflich verwertet. Dabei handelt es sich ueberwiegend um Materialien, die ohne weitere Aufbereitung verwertbar sind. Die bislang noch deponierten oder als Sonderabfall entsorgten eisen- und stahlrelevanten Abfallstoffe sind ohne weiteres als Sekundaerrohstoff nicht stofflich verwertbar. Die Aufarbeitung dieser Abfallstoffe ist fuer den Wiedereinsatz in den vorhandenen Anlagen zur Gewinnung von Eisen und Stahl zwingend erforderlich. Die Ergebnisse der eigenen Untersuchungen haben klar gezeigt, dass der Kupolofen fuer die Nutzung einer grossen Vielfalt an Abfallstoffen geeignet ist. Zur Erhoehung der spezifischen Einsatzmenge an eisen- und stahlrelevanten Abfallstoffen untersuchen wir derzeit den Einsatz von oxidischen Materialien als sogenannte selbstgaengige Briketts zusammen mit den ueblichen Eisentraegern fuer die Erzeugung von fluessigem Giessereieisen. Selbstgaengig heisst hierbei, dass der Reduktionskohlenstoff und auch die notwendigen Legierungselemente insbesondere Silizium als SiC in den Briketts eingebunden werden. Fuer die Aufbereitung

  7. Exemplary subsurface geothermal projects in the western part of Germany; Beispiele zur Nutzung oberflaechennaher Geothermie im Westen Deutschlands

    Energy Technology Data Exchange (ETDEWEB)

    Sanner, B.; Mands, E. [UbeG GbR, Wetzlar (Germany); Kohlsch, O. [EWS Erdwaerme-Systemtechnik GmbH, Delbrueck (Germany)

    2004-12-01

    During the past few years, several projects involving ground source heat pumps were carried out in western Germany, especially in the Rhine-Main and Rhine-Ruhr-Sieg region including the cities of Frankfurt and Cologne. Some of the project partners are big names in industry, e.g. an office building of PhilipsSparte APD at Wetzlar and the museum building of chocolate producer Ritter Sport. Other projects are sited in rural regions, from the Black Forest to the Weserbergland hills. The contribution presents several interesting projects, e.g. the police headquarters building at Bonn (right bank, groundwater use) and the office building of the Federal Office of Environmental protection, also at Bonn (left bank, geothermal probles), and three school buildings in the Frankfurt/Main region at Glashuetten, Bad Homburg-Oberstedten and Usingen-Eschbach. (orig.) [German] In den letzten Jahren wurden im Westen Deutschlands eine ganze Reihe groesserer Projekte mit erdgekoppelten Waermepumpen verwirklicht, besonders im Rhein-Main-Gebiet und im Rhein-Ruhr-Sieg-Gebiet einschliesslich der Grossstaedte Frankfurt und Koeln. Zu den Bauherren zaehlen inzwischen auch bekannte Namen der deutschen Industrie. So wird in Wetzlar ein Buerogbaeude der PhilipsSparte APD mit Erdwaermesonden ausgeruestet, und das Museum des Schokoladenherstellers Ritter Sport wird auf Energiepfaehlen stehen. Abe auch im laendlichen Raum sind interessante Anlagen entstanden, vom Schwarzwald bis ins Weserbergland. Im Folgenden werden einige interessante Beispiele vorgestellt. Dabei sind Projekte in der Ausfuehrungsphase wie z.B. das Polizeipraesidium in Bonn (rechts des Rheins mit Grundwassernutzung), oder das Bundesamt fuer Naturschutz in Bonn, diesmal auf der linken Rheinseite und mit Erdwaermesonden. In Ausfuehrungn bzw. fertiggestellt sind auch Erdwaermesonden fuer 3 Schulen im Raum Frankfurt:/Main, in Glashuetten, Bad Homburg-Oberstedten und Usingen-Eschbach. (orig.)

  8. Research projects into the safety of nuclear power plants. Period cover 01. January 2014 - 30. June 2014. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum 01. Januar 2014 - 30. Juni 2014. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi), formerly Federal Ministry of Economics and Technology, sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the 1st half-year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to general topics related to reactor safety research as well as to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  9. The EEG as an instrument of the Federal areal management of renewable energies - also a contribution to the discussion about energy sectoral planning; Das EEG als Instrument des Bundes zur raeumlichen Steuerung der erneuerbaren Energien - zugleich ein Beitrag zur Diskussion um eine Energiefachplanung

    Energy Technology Data Exchange (ETDEWEB)

    Gruener, Anna-Maria [Stiftung Umweltenergierecht, Wuerzburg (Germany); Sailer, Frank [Stiftung Umweltenergierecht, Wuerzburg (Germany). Forschungsgebiet Energieanlagen- und Infrastrukturrecht

    2016-05-15

    The areal management of the power generation structure takes place at first glance mainly on the Zoning and Planning Law, less than the energy law. The only sporadically encountered jurisprudential work for controlling effect of the EEG came to the conclusion, the current configuration of the support system in the EEG is in deficit and ''blind'' to the localization and areal distribution of energy generation plants in the Federal territory, although the EEG is representing a ''downright predestined management tool''. On closer inspection, however, shows that individual provisions have entirely certain location preferences or cause areal distribution effects and the EEG thus play a management effect. The contribution is therefore devoted to the question of whether and how the EEG 2014, with the overall network expansion and payment system is able to manage the energy production from renewable energy sources in the area and whether an energy specialist planning is useful and necessary. [German] Die raeumliche Steuerung der Energieerzeugungsstruktur findet auf den ersten Blick vornehmlich ueber das Raumordnungs- und Planungsrecht statt, weniger ueber das Energierecht. Die allenfalls vereinzelt anzutreffenden rechtswissenschaftlichen Arbeiten zur Steuerungsleistung des EEG kommen zu dem Ergebnis, die jetzige Ausgestaltung des Foerdersystems im EEG sei defizitaer und ''blind'' gegenueber der Lokalisierung und raeumlichen Verteilung von EE-Anlagen im Bundesgebiet, obwohl das EEG doch ein ''geradezu praedestiniertes Steuerungsinstrument'' darstelle. Bei naeherer Betrachtung zeigt sich jedoch, dass einzelne Regelungen durchaus bestimmte Standortpraeferenzen aufweisen bzw. raeumliche Verteilungseffekte bewirken und dem EEG damit eine steuernde Wirkung zukommt. Der Beitrag widmet sich daher der Frage, ob und wie das EEG 2014 sowie das allgemeine Netzausbau- und -entgeltsystem die Energieerzeugung

  10. The distribution of {sup 236}U/{sup 238}U in the North Atlantic and adjacent oceans; Die Verteilung von {sup 236}U/{sup 238}U im Nordatlantik und den angrenzenden Ozeanen

    Energy Technology Data Exchange (ETDEWEB)

    Christl, Marcus; Casacuberta, Nuria; Lachner, Johannes; Maxeiner, Sascha; Vockenhuber, Christof; Synal, Hans-Arno [Labor fuer Ionenstrahlphysik, ETH Zuerich (Switzerland); Herrmann, Juergen [Bundesamt fuer Seeschifffahrt und Hydroghraphie, Hamburg (Germany); Castrillejo, Maxi; Masque, Pere [Universitat Autonoma de Barcelona (Spain); Rutgers van der Loeff, Michiel [Alfred-Wegener-Institut, Bremerhaven (Germany)

    2015-07-01

    The technical developments of recent years, such as the introduction of helium as a stripping gas, make compact AMS systems probably among the most sensitive analyzers available for ultra-trace analyzes of actinides in the environment. Such systems are particularly suitable for the trace analysis of {sup 236}U since conventional mass spectrometry does not provide the necessary suppression of the substrate caused by molecules or neighboring masses. Over the past few years, unique data sets of {sup 236}U/{sup 238}U have been produced at the AMS System Tandy of the ETH Zurich in the Atlantic and Arctic Ocean as well as in the Mediterranean and the North Sea. This lecture will provide a brief overview of the latest technical developments in the field of heavy ion analysis at compact AMS plants at ETH Zurich. In the second part, the produced data sets are then assembled and the current understanding of this new ocean tracer discussed. [German] Die technischen Entwicklungen der letzten Jahre, wie zum Beispiel die Einfuehrung von Helium als stripper Gas, machen kompakte AMS Systeme wahrscheinlich zu den sensitivsten verfuegbaren Analysegeraeten fuer Ultra-Spurenstoffanalysen von Aktiniden in der Umwelt. Solche Systeme eignen sich im Besonderen zur Spurenanalyse von {sup 236}U, da konventionelle Massenspektrometrie hier nicht die erforderliche Unterdrueckung des durch Molekuele oder Nachbarmassen verursachten Untergrundes bietet. Am AMS System Tandy der ETH Zuerich wurden waehrend der letzten Jahre einzigartige Datensaetze von {sup 236}U/{sup 238}U im Atlantischen und Arktischen Ozean, sowie im Mittelmeer und der Nordsee produziert. In diesem Vortrag soll zunaechst ein kurzer Ueberblick ueber die neuesten technischen Entwicklungen im Bezug auf Schwerionen Analysen an kompakten AMS Anlagen der ETH Zuerich gegeben werden. Im zweiten Teil werden dann die produzierten Datensaetze zusammengefuegt und das gegenwaertige Verstaendnis dieses neuen Ozean-Tracers diskutiert.

  11. Firing technology in practice - temperature, residence time, corrosion; Feuerungstechnik in der Praxis - Temperatur, Verweilzeit, Korrosion

    Energy Technology Data Exchange (ETDEWEB)

    Freimann, P.; Holl, D. [Muellheizkraftwerk Betriebsgesellschaft mbH, Burgkirchen/Alz (Germany)

    1998-09-01

    In a circular dated 1st Sept. 1994, i.e., after the issue of the pertinent planning decision, the Federal Environmental Ministry, BMU, laid down uniform standards on measurements and the parameterisation of the evaluation system for different operation states and loads. Subsequently, TUeV, the German Technical Control Board, prepared the parameterisation curves on the basis of these specifications. The implementation of the BMU paper of 1st Sept. 1994 did not result in any advantage, nor did it lead to a reduction of plant emissions, nor to advantages in the operation of the waste-fuelled cogeneration plant. On the contrary, elevated gas consumption and operating trouble due to frequent feed stops worsened the operating state of the plant. Elevated crude gas temperature in the boiler reduced the lifetime of the two boilers to a critical degree. An operating temperature of 850 C and a residence time of approx. 1 sec. in Burgkirchen waste-fuelled cogeneration plant have not worsened emission values while rendering the plant operable again. [Deutsch] Durch Rundschreiben d. BMU vom 01.09.1994 - also nach Erlass des Planfeststellungsbeschlusses - wurden einheitliche Vorgaben ueber Messungen und Parametrierung des Auswertesystems fuer die verschiedenen Betriebs- bzw. Lastzustaende erlassen. Unter Beruecksichtigung dieser Vorgaben wurden vom TUeV die Parametrierungskurven erstellt. Die Umsetzung des BMU-Papieres vom 01.09.1994 ergab keinerlei Vorteile, weder gab es eine Verringerung der anlagenbedingten Emissionen noch Vorteile fuer den Betrieb des MHKW`s. Im Gegenteil, erhoehte Gasverbraeuche und Betriebsstoerungen durch oftmalige Beschickungsstops verschlechterten den Betriebszustand. Erhoehte Rohgastemperatur im Kessel reduzierten die Lebensdauer der beiden Kessel kritisch. Der Betrieb mit 850 C und mit einer Verweilzeit von ca. 1 sec. fuehrt im MHKW Burgkirchen zu keiner Verschlechterung der Emissionswerte, macht aber die Anlagen wieder betreibbar. (orig./SR)

  12. Results of VGB research work with respect to operation of BWR pipes made of austenitic SS; Ergebnisse des VGB-Forschungsvorhabens zur Absicherung des Betriebsverhaltens austenitischer Staehle in SWR-Rohrleitungen

    Energy Technology Data Exchange (ETDEWEB)

    Kilian, R [Siemens AG Energieerzeugung KWU, Erlangen (Germany); Bruemmer, G [Hamburgische Electricitaets-Werke AG, Hamburg (Germany)

    1998-11-01

    The VGB research project was to examine and characterize various, operation-induced impacts on the crack formation in stabilized austenitic steels, caused by intercrystalline stress corrosion cracking as a result of sensitization after chromium depletion at the grain boundaries. The results of this project as well as available operating experience show that the measures taken so far for the future operation of the German BWR plants, for avoiding in these plants intercrystalline stress corrosion cracking, correspond to the state of the art and achieve the wanted purpose. These measures are: use of optimized material W-No. 1.4550 with reduced carbon contents; use of optimized welding techniques for reducing the heat input and the welding shrinkage (cold deformation.); optimized preparation of welding work in order to avoid shape defects during welding (eg. edge misalignment, defective mash welds); reduction of tensile stresses occurring during welding; compliance with the recent VGB water chemistry code. (orig./CB) [Deutsch] Das VGB-Forschungsvorhaben sollte verschieden gelagerte Einfluesse auf die Rissbildung im Betrieb von stabilisierten austenitischen Staehlen, verursacht durch interkristalline Spannungsrisskorrosion infolge Sensbilisierung durch Chromverarmung an den Korngrenzen, systematisch erfassen. Aus den Forschungsergebnissen dieses VGB-Programms sowie den bisher vorliegenden Betriebserfahrungen ist festzuhalten, dass die bisher durchgefuehrten Massnahmen fuer den zukuenftigen Betrieb der deutschen SWR-Anlagen zur Vermeidung von interkristalliner Spannungsrisskorrosion zielgerichtet waren und dem heutigen Wissensstand entsprechen. Diese Massnahmen sind: 1. Einsatz von optimiertem Werkstoff W.-Nr. 1.4550 mit abgesenktem Kohlenstoffgehalt; 2. Einsatz von optimierten Schweissverfahren zur Verminderung der Waermeeinbringung und zur Verringerung des Schweissschrumpfes (Kaltverformung.); 3. Durchfuehrung einer optimierten Schweissnahtvorbereitung zur Vermeidung

  13. Simulation of spray phenomena using the containment code system COCOSYS. 1{sup st} Technical report.Validation and interpretation of selected models and of the coupling of the system codes ATHLET-CD and COCOSYS (VAMKoS); Simulation von Spruehstrahlphaenomenen mit dem Containment Code System COCOSYS. 1. Technischer Fachbericht. Validierung und Analyse ausgewaehlter Modelle sowie der Kopplung der Systemcodes ATHLET-CD und COCOSYS (VAMKoS)

    Energy Technology Data Exchange (ETDEWEB)

    Risken, Tobias; Koch, Marco K.

    2014-12-15

    The present report is the first Technical Report within the research project ''Validation and interpretation of selected models and of the coupling of the system codes ATHLET-CD and COCOSYS'', funded by the German Federal Ministry for Economic Affairs and Energy (BMWi 1501465) and projected at the Reactor Simulation and Safety Group, Chair of Energy Systems and Energy Economics (LEE) at the Ruhr-Universitaet Bochum (RUB). This report deals with the simulation of spray phenomena with the containment code system COCOSYS, which is developed by the German Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH. First, post-test calculations of the OECD THAI-2 tests HD-30 and HD-31 are presented. The simulation results are compared to experimental values and thereby assessed. The analysis focuses an the assessment of the simultaneous use of the COCOSYS models IVO (spray model) and FRONT (combustion model) as well as a spray entrainment model developed at RUB regarding the simulation of the phenomena related to the interaction of spray and combustion processes. The simulation results show the necessity to consider the induced turbulences. The simulation of these turbulences is performed by modifying the FRONT input parameters leading to an improvement of the simulation results. The consideration of the entrainment positively influences the simulated flow pattern. Subsequently, the simulation of the entrainment of interacting sprays, as occurring in containment spray systems, is considered. The entrainment of interacting sprays is influenced by droplet collisions and changes of the drag between the droplets and the atmosphere. For the simulation an entrainment factor, which has to be determined externally, is implemented into COCOSYS. Exemplary simulations of the OECD SETH-2 ST3 tests show, that in general the use of entrainment factors enables the calculation of alternated gas distributions.

  14. Spatiotemporal analysis of putative notochordal cell markers reveals CD24 and keratins 8, 18, and 19 as notochord-specific markers during early human intervertebral disc development.

    Science.gov (United States)

    Rodrigues-Pinto, Ricardo; Berry, Andrew; Piper-Hanley, Karen; Hanley, Neil; Richardson, Stephen M; Hoyland, Judith A

    2016-08-01

    In humans, the nucleus pulposus (NP) is composed of large vacuolated notochordal cells in the fetus but, soon after birth, becomes populated by smaller, chondrocyte-like cells. Although animal studies indicate that notochord-derived cells persist in the adult NP, the ontogeny of the adult human NP cell population is still unclear. As such, identification of unique notochordal markers is required. This study was conducted to determine the spatiotemporal expression of putative human notochordal markers to aid in the elucidation of the ontogeny of adult human NP cells. Human embryos and fetuses (3.5-18 weeks post-conception (WPC)) were microdissected to isolate the spine anlagens (notochord and somites/sclerotome). Morphology of the developing IVD was assessed using hematoxylin and eosin. Expression of keratin (KRT) 8, KRT18, KRT19, CD24, GAL3, CD55, BASP1, CTGF, T, CD90, Tie2, and E-cadherin was assessed using immunohistochemistry. KRT8, KRT18, KRT19 were uniquely expressed by notochordal cells at all spine levels at all stages studied; CD24 was expressed at all stages except 3.5 WPC. While GAL3, CD55, BASP1, CTGF, and T were expressed by notochordal cells at specific stages, they were also co-expressed by sclerotomal cells. CD90, Tie2, and E-cadherin expression was not detectable in developing human spine cells at any stage. This study has identified, for the first time, the consistent expression of KRT8, KRT18, KRT19, and CD24 as human notochord-specific markers during early IVD development. Thus, we propose that these markers can be used to help ascertain the ontogeny of adult human NP cells. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. J Orthop Res 34:1327-1340, 2016. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc.

  15. Spatiotemporal analysis of putative notochordal cell markers reveals CD24 and keratins 8, 18, and 19 as notochord‐specific markers during early human intervertebral disc development

    Science.gov (United States)

    Rodrigues‐Pinto, Ricardo; Berry, Andrew; Piper‐Hanley, Karen; Hanley, Neil; Richardson, Stephen M.

    2016-01-01

    ABSTRACT In humans, the nucleus pulposus (NP) is composed of large vacuolated notochordal cells in the fetus but, soon after birth, becomes populated by smaller, chondrocyte‐like cells. Although animal studies indicate that notochord‐derived cells persist in the adult NP, the ontogeny of the adult human NP cell population is still unclear. As such, identification of unique notochordal markers is required. This study was conducted to determine the spatiotemporal expression of putative human notochordal markers to aid in the elucidation of the ontogeny of adult human NP cells. Human embryos and fetuses (3.5–18 weeks post‐conception (WPC)) were microdissected to isolate the spine anlagens (notochord and somites/sclerotome). Morphology of the developing IVD was assessed using hematoxylin and eosin. Expression of keratin (KRT) 8, KRT18, KRT19, CD24, GAL3, CD55, BASP1, CTGF, T, CD90, Tie2, and E‐cadherin was assessed using immunohistochemistry. KRT8, KRT18, KRT19 were uniquely expressed by notochordal cells at all spine levels at all stages studied; CD24 was expressed at all stages except 3.5 WPC. While GAL3, CD55, BASP1, CTGF, and T were expressed by notochordal cells at specific stages, they were also co‐expressed by sclerotomal cells. CD90, Tie2, and E‐cadherin expression was not detectable in developing human spine cells at any stage. This study has identified, for the first time, the consistent expression of KRT8, KRT18, KRT19, and CD24 as human notochord‐specific markers during early IVD development. Thus, we propose that these markers can be used to help ascertain the ontogeny of adult human NP cells. © 2016 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. J Orthop Res 34:1327–1340, 2016. PMID:26910849

  16. The industrial application of fracture mechanics concepts discussed at the background of international standards and guidelines; Die industrielle Anwendung bruchmechanischer Konzepte vor dem Hintergrund internationaler Bewertungsvorschriften und Regelwerke

    Energy Technology Data Exchange (ETDEWEB)

    Zerbst, U. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung; Langenberg, P. [Ingenieurbuero fuer Werkstofftechnik, Aachen (Germany)

    2000-07-01

    Many features from the background for an intensified application of fracture mechanics concepts in many industries world-wide. These include requirements for a permanent increase of the level of performance of technical components and structures by the introduction of new materials, joining technologies and design principles, the problem of ageing components and life extension, an increased emphasis on non-destructive in-service inspection combined with improved NDT techniques, and also a number of failure events caused by fatigue and fracture The aim of the present paper is to give a brief state-of-the-art review on how fracture mechanics is applied in different industrial branches today. This is based on standards and guidelines in the aerospace industry, in the nuclear and fossil power generation, in the chemical and petrochemical and the pipeline industry, in civil engineering, offshore technique and other fields. Based on the review an outlook is given on a future development that would be reasonable and desirable from the point of view of a basically unified philosophy of fracture mechanics application. (orig.) [German] Die Erhoehung der Leistungsparameter vieler Maschinen und Anlagen verbunden mit dem Einsatz neuer Werkstoffe, Fuegeverfahren und Konstruktionsprinzipien, der Betrieb vieler Strukturen ueber ihre projektierte Lebensdauer hinaus, technische Verbesserungen und ein durchgaengigerer Einsatz zerstoerungsfreier Defektpruefverfahren, aber auch immer wieder einmal auftretende Schadensfaelle bilden den Hintergrund fuer die zunehmende Nutzung bruchmechanischer Bewertungsvorschriften in der industriellen Praxis. Die vorliegende Studie zieht eine momentane Bilanz dieser Entwicklung am Beispiel von Fachbereichsstandards der Luft- und Raumfahrtindustrie, der konventionellen und Kernkrafttechnik, der Chemie und Petrochemie, der Pipelineindustrie, des Stahlbaus, der Offshore-Technik und anderer Bereiche. Ausgehend von dieser Bestandsaufnahme wird ein Ausblick

  17. Generic safety questions. evaluation of investigations, studies and expertises of other states for the knowledge base GeSi; Generische Sicherheitsfragen. Auswertung von Untersuchungen, Studien und Gutachten anderer Staaten fuer die Wissensbasis GeSi

    Energy Technology Data Exchange (ETDEWEB)

    Boenigke, Guenther; Eismar, Shanna

    2016-03-15

    For the non-profit-making expert organization Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, maintaining know-how and broadening its knowledge in the field of nuclear safety is of fundamental relevance. One important approach to achieving this goal is to collect and assess national and international findings and events in the field of nuclear safety e.g. in connection with generic issues - i.e. issues that are not specific to a particular plant. The GeSi/GeSi International database and its subsystems serves for reflecting the current state of the art in science and technology in the field of generic issues and also as a tool in the area of knowledge management. Within the framework of Project 3611 I 01500 sponsored by the BMUB, information on these issues was compiled systematically. The aim of the project was to examine the safety issues that are cur-rently discussed at national and international level with regard to their relevance for the conditions prevailing in Germany and to follow up in detail those issues that are of relevance for national safety practice. Similar knowledge databases also exist in other major nuclear-power-plant-operating countries such as the US, Canada, and France. At present (September 2014), there are 303 issues in the overall database, of which 23 are assessed to be of ''high'' significance for German plants. Of these, 16 issues belong to the sub-database for generic safety issues (GSI) and seven belong to the sub-database for generic research issues (GFO). The database GSI currently contains 138 issues that need to be further addressed and 101 issues that are considered as solved. 43 issues from the database GFO require further investigation, while 21 issues are considered as solved.

  18. East German power plants: New concepts for the power and energy supply; Ostdeutscher Kraftwerkspark: Neugestaltung der Kraft- und Waermeversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Bald, A [Fossil Befeuerte Kraftwerke Inland, Bereich Energieerzeugung (KWU), Siemens AG (Germany)

    1994-10-01

    The enhancement of the energy economy plays the key role for the economic and ecological sanitation of the New Laender. Due to the bad condition sanitation mostly means new construction. The energy economy, the manufacturing industry and the public administration have successfully met this challenge. The programme has been launched, nearly all key projects have been given to contractors, the majority has already been realised and the first plants have already been connected to the network. Due to the performance that has been achieved so far, the following statement can already be made today. At the end of the decade the New Laender will have the most modern power and thermal energy supply in the world. Hence the industrial site eastern Germany gains an attractiveness that does not have to fear the international competition. Apart from strong impetus for economic growth and employment the environmentally friendly energy supply will lead to a considerable improvement of the life quality of approx. 16 million people. (orig.) [Deutsch] Bei der oekonomischen und oekologischen Gesundung der neuen Bundeslaender faellt der Sanierung der Energiewirtschaft eine Schluesselrolle zu. Wegen der schlechten Substanz kann Sanierung zumeist nur Neubau heissen. Dieser Herausforderung haben sich Energiewirtschaft, Herstellerindustrie und oeffentliche Verwaltung erfolgreich gestellt. Das Ausbauprogramm ist auf den Weg gebracht, fast alle Schluesselprojekte sind vergeben, die meisten mittlerweile in der Realisierung, und die ersten Anlagen sind sogar schon am Netz. Angesichts des bisher Geleisteten laesst sich bereits heute feststellen: Ende des Jahrzehnts werden die neuen Bundeslaender ueber die modernste Strom- und Waermeversorgung der Welt verfuegen. Der Wirtschaftsstandort Ostdeutschland gewinnt damit eine Attraktivitaet, die international keinen Vergleich zu scheuen braucht. Neben kraeftigen Wachstums- und Beschaeftigungsimpulsen wird der umweltfreundliche Neuaufbau der

  19. In-service monitoring of piping and vessels in nuclear power plants. Report on BMU-study SR 2218; Betriebsueberwachung von Rohrleitungen und Behaeltern in Kernkraftwerken. Bericht ueber die BMU-Studie SR 2218

    Energy Technology Data Exchange (ETDEWEB)

    Hofstoetter, P. [Technischer Ueberwachungs-Verein Rheinland e.V., Koeln (Germany); Dittmar, S. [Technischer Ueberwachungs-Verein Nord e.V., Hamburg (Germany); Maile, K. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Metzner, K.J. [Preussen Elektra AG, Hannover (Germany). Hauptverwaltung

    1998-11-01

    On behalf of the BMU, the authors carried out a study intended to give an overview of and evaluate current practice and methods applied in fatigue monitoring of pipes and vessels of nuclear power plants. The authors on the one hand present fundamentals relating to typical load cases, monitoring and measuring techniques and fatigue computation methods, as well as the relevant legal provisions, and on the other hand describe the monitoring practice, tools and techniques referring to available literature, own experience, and interviews with operators/owners and manufacturers of existing power plants. The locations selected for examinations, measuring techniques, data acquisition and evaluation as well as measuring protocols are explained. The monitoring and inspection methods applied are assessed in a critical review which is the basis of proposals for improvement, relating to the measured data acquisition and especially to data analysis and evaluation. The paper focuses on the essential results of the study, excluding those parts of the study dealing with the calculation of fatigue in components, which will be the subject of another paper to be published. (orig./CB) [Deutsch] Im Auftrag ders BMU erarbeiteten die Verfasser eine Studie zur Darstellung und Bewertung der heute in Kernkraftwerken ueblichen Ermuedungsueberwachung von Rohrleitungen und Behaeltern. Dazu wurden einerseits die Grundlagen zur Beanspruchung, Messtechnik und Ermuedungsberechnung zusammengestellt sowie geltende Vorschriften aufgefuehrt. Andererseits wurde auf der Basis der verfuegbaren Literatur, eigener Erfahrungen sowie einer Befragung von Betreibern und Herstellern der heute ueblichen Anlagen die Messstellen, Messverfahren, Messwerterfassungsanlagen und Auswertungsmethoden sowie bisherige Ergebnisse der Messungen dargestellt. Das derzeitige Vorgehen wurde kritisch bewertet. Daraus resultierten Verbesserungsvorschlaege zur Messwerteerfassung, vor allem aber zur Auswertung und Bewertung der

  20. Research projects into the safety of nuclear power plants. Period cover 01. January - 30. June 2016. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum 01. Januar - 30. Juni 2016. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to general topics related to reactor safety research as well as to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  1. Simulation of organ patterning on the floral meristem using a polar auxin transport model.

    Directory of Open Access Journals (Sweden)

    Simon van Mourik

    Full Text Available An intriguing phenomenon in plant development is the timing and positioning of lateral organ initiation, which is a fundamental aspect of plant architecture. Although important progress has been made in elucidating the role of auxin transport in the vegetative shoot to explain the phyllotaxis of leaf formation in a spiral fashion, a model study of the role of auxin transport in whorled organ patterning in the expanding floral meristem is not available yet. We present an initial simulation approach to study the mechanisms that are expected to play an important role. Starting point is a confocal imaging study of Arabidopsis floral meristems at consecutive time points during flower development. These images reveal auxin accumulation patterns at the positions of the organs, which strongly suggests that the role of auxin in the floral meristem is similar to the role it plays in the shoot apical meristem. This is the basis for a simulation study of auxin transport through a growing floral meristem, which may answer the question whether auxin transport can in itself be responsible for the typical whorled floral pattern. We combined a cellular growth model for the meristem with a polar auxin transport model. The model predicts that sepals are initiated by auxin maxima arising early during meristem outgrowth. These form a pre-pattern relative to which a series of smaller auxin maxima are positioned, which partially overlap with the anlagen of petals, stamens, and carpels. We adjusted the model parameters corresponding to properties of floral mutants and found that the model predictions agree with the observed mutant patterns. The predicted timing of the primordia outgrowth and the timing and positioning of the sepal primordia show remarkable similarities with a developing flower in nature.

  2. Research projects into the safety of nuclear power plants. Period cover 01. July 2015 - 31. December 2015. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum 01. Juli - 31. Dezember 2015. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to general topics related to reactor safety research as well as to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. It has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  3. Systematic analysis of geothermal plants. Influence of temperatures in consumer systems on the specific cost of the distributed heat; Systemanalytische Erfassung von Nutzungsanlagen hydrogeothermaler Ressourcen. Einfluss der Temperaturen in den Abnehmersystemen auf den Waermegestehungspreis

    Energy Technology Data Exchange (ETDEWEB)

    Schallenberg, K [GeoForschungsZentrum Potsdam (Germany)

    1997-12-01

    On the basis of a general investigation of the impact of geological situation, thermal water loop and consumer structure on the economy of heating systems, different geothermal plants are analysed in detail. In the study, for example, variations of the temperature conditions in district heating systems were considered while the geologic conditions are maintained. It is shown that the specific costs calculated for the distributed heat are sensitive to the amount of heat extracted from the Earth`s interior. Therefore, it was necessary to make assumptions for the duration curve of the consumer system. An exponential duration curve was verified by comparison with data from an existing district heating system. The calculated specific heat costs for different network layouts are transformed finally into an equivalent investment potential. The results clearly indicate the possibilities for an optimization of the system when investments into the heating network would be made. (orig.) [Deutsch] Hydrogeothermale Nutzungsanlagen wurden auf Basis der Einflussgroessen Geologie, Thermalwasserkreis und Abnehmerstruktur systemanalytisch erfasst. Daraus ergibt sich die Grundlage zum Vergleich verschiedener Anlagen. Nachhaltige Einfluesse auf die Wirtschaftlichkeit von Geothermieanlagen ergeben sich aus der Betriebsweise der Abnehmerstruktur. Die dargestellten Untersuchungen zielen deshalb zunaechst auf die Variation der Temperaturparameter des Netzes und deren Einfluss auf die Waermegestehungskosten ab. Bei diesem Ansatz wurden zunaechst die geologischen Eingangsgroessen konstant gehalten. Grundlage der statischen Kostenrechnung in Anlehnung an VDI 2067 ist eine Kostenzusammenstellung der Einzelkomponenten einer geothermischen Heizzentrale. Um den geothermischen Beitrag zur Waermeversorgung moeglichst genau zu beschreiben, ist die Kenntnis von geordneten Jahresganglinien der Abnehmersysteme erforderlich. Zur mathematischen Beschreibung diente eine Exponentialfunktion, deren

  4. Research projects into the safety of nuclear power plants. Period cover 01. July - 31. December 2016. Progress report; Forschungsvorhaben auf dem Gebiet der Reaktorsicherheit. Berichtszeitraum 01. Juli - 31. Dezember 2016. Fortschrittsbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-07-01

    Within its competence for energy research the Federal Ministry for Economic Affairs and Energy (BMWi) sponsors research projects on the safety of nuclear power plants currently in operation. The objective of these projects is to provide fundamental knowledge, procedures and methods to contribute to realistic safety assessments of nuclear installations, to the further development of safety technology and to make use of the potential of innovative safety-related approaches. The Gesellschaft fur Anlagen- und Reaktorsicherheit (GRS) gGmbH, by order of the BMWi, continuously issues information on the status of such research projects by publishing semi-annual and annual progress reports within the series of GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about the objectives, work performed, results achieved, next steps of the work etc. The individual reports are prepared in a standard form by the research organisations themselves as documentation of their progress in work. The progress reports are published by the Project Management Agency/ Authority Support Division of GRS. The reports as of the year 2000 are available in the internet-based information system on results and data of reactor safety research (https://www.grs-fbw.de). The compilation of the reports is classified according to general topics related to reactor safety research as well as to the classification system ''Joint Safety Research Index (JSRI)''. The reports are arranged in sequence of their project numbers. lt has to be pointed out that the authors of the reports are responsible for the contents of this compilation. The BMWi does not take any responsibility for the correctness, exactness and completeness of the information nor for the observance of private claims of third parties.

  5. TomoWELD. Precise detection of weld defects; TomoWELD. Defekte in Schweissnaehten praezise erkennen

    Energy Technology Data Exchange (ETDEWEB)

    Walter, David [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2016-06-15

    Nuclear power plants are complex and technically elaborate systems whose aim is to produce electricity. They must meet the highest safety requirements. Within the reactors, nuclear reactions and radioactive transformations release energy which is used to evaporate water. The steam generated drives turbines that in turn are coupled with generators which convert the kinetic energy provided by the turbines into electrical energy. The process is easy to illustrate but difficult to control and requires technical equipment such as kilometre-long pipe systems. Austenitic steel is frequently used for this purpose because of its high strength and corrosion resistance. The individual pipe components are joined by welding. However, welds may contain hidden defects. Cracks, lack of fusion or pore nests that can remain undetected may have catastrophic consequences. Therefore, all welds in a nuclear power plant, without exception, must be checked. Approved non-destructive methods use ultrasound and X-ray. The technology developed at BAM is called TomoWELD. [German] Kernkraftwerke sind komplexe und technisch aufwendige Anlagen zur Gewinnung von Elektrizitaet. Sie muessen allerhoechsten Sicherheitsanspruechen genuegen. Die bei Kernreaktionen und radioaktiven Umwandlungen freiwerdende Energie wird genutzt, um Wasser zu verdampfen. Der Dampf treibt Turbinen an und die wiederum sind mit Generatoren gekoppelt, welche die durch die Turbinen bereitgestellte kinetische Energie in elektrische Energie umwandeln. Der Prozess laesst sich einfach darstellen, ihn zu steuern ist allerdings kompliziert und erfordert weitere technische Komponenten, wie beispielsweise kilometerlange Rohrleitungssysteme. Wegen seiner hohen Festigkeit sowie Korrosionsbestaendigkeit wird oft austenitischer Stahl dafuer verwendet. Gefuegt werden die einzelnen Rohrteile durch Schweissen. Doch Schweissnaehte koennen viele verborgene Defekte enthalten. Bleiben Risse, Bindefehler oder Porennester unentdeckt, kann das

  6. Solar reactors for freshwater treatment in developing countries with high radiation intensity, with particular regard to part-project No. 1: Microbiology, process conception. Final report; Solarreaktoren fuer die Trinkwasseraufbereitung in Entwicklungslaendern mit hoher Sonnenstrahlungsintensitaet unter besonderer Beruecksichtigung von Teilprojekt 1: Mikrobiologie, Verfahrenskonzeption. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Watzke, E.; Roth, M.; Hoffmeier, C.

    2000-07-01

    Simple and low-cost systems for freshwater disinfestation for developing countries with high solar radiation intensity were investigated for the purpose of providing freshwater of better microbiological quality to a wider population in order to prevent infectious diseases, especially diarrhoea diseases. The bactericidic effects of short-wave and long-wave solar radiation of the UV and NIR range in combination with heat were investigated. Special glasses with high UV-permeability were developed and tested for their applicability as tube materials in freshwater disinfestation systems. the systems were designed and constructed with a view to utilising the synergistic effects of UV and thermal radiation. For higher efficacy, the water is kept in an insulated tank at elevated temperature for several hours. Further, special-purpose glass vessels with high UV permeability were developed for disinfestation. In a follow-up project, long-term tests will be carried out in practical conditions in developing countries. [German] Das Ziel der Verbundforschung bestand in der Entwicklung einfacher, kostenguenstiger Anlagen und Vorrichtungen zur Trinkwasserentkeimung in Entwicklungslaendern mit hoher Sonnenstrahlungsintensitaet. Es soll damit ein Beitrag zur Bereitstellung von Trinkwasser mit wesentlich verbesserter mikrobiologischer Qualitaet fuer breite Bevoelkerungsschichten geleistet werden, um Infektionskrankheiten, insbesondere Diarrhoeerkrankungen zurueckzudraengen. Die bakterizide Wirkung der kurz- und langwelligen Sonnenstrahlung im UV- bzw. NIR-Bereich in Kombination mit Waermeeinwirkungen wurde untersucht. Spezielle hoch UV-durchlaessige Glaeser wurden entwickelt und ihre Eignung fuer einen Einsatz in Trinkwasserentkeimungsanlagen (TWEA) getestet. Mit hoch UV-druchlaessigen Rohren aus Spezialglaesern ausgeruestete TWEA wurden konstruiert und gebaut, mit denen der synergistische Effekt von UV- und Waermestrahlung der Sonne zur Trinkwasserdesinfektion genutzt wird. Zur

  7. Thermodynamic aspects of heavy metal volatility during utilisation of the energetic and material fraction of waste materials; Schwermetallfluechtigkeit bei der energetischen und stofflichen Verwertung von Abfaellen aus der Sicht der Thermodynamik

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, B; Starke, A [TU Bergakademie Freiberg (Germany). Inst. IEC

    1998-09-01

    Co-combustion plants, in which fuel is partly substituted by waste materials, are subject to the 17th BImSchV (Nuisance Control Ordinance) provided that the thermal fraction of 25% is not exceeded. Emission limits are calculated proportionately on the basis of limiting values for emissions from coal power stations (13th BImSchV) and waste incinerators (17th BImSchV). Compared to coal, waste has higher concentrations of heavy metals and halogens, which results in enhanced emissions of heavy metal compounds and chlorides with the flue gas and gasification gas. Plant operators intending to opt for co-combustion must check if the existing flue gas purification system is efficient enough to meet the specifications of the 17th BImSchV. In general, thermodynamic modelling is the most common method of evaluation and optimisation for high-temperature processes of this kind. (orig./SR) [Deutsch] Da bei der Mitverbrennung ein Teil des Brennstoffes durch den Reststoff substituiert wird, unterliegen diese Anlagen der Anteilsregelung nach 17. BImSchV, sofern ein thermischer Anteil von 25% nicht ueberschritten wird. Emissionsgrenzwerte werden anteilig aus den z.B. fuer Kohlekraftwerke gueltigen Grenzwerten nach TA Luft oder 13. BImSchV und denen fuer Abfaelle u.ae. nach 17 BImSchV ermittelt. Der hier betrachtete Reststoff Muell beinhaltet im Vergleich zur Kohle hohe Konzentrationen an Schwermetallen und Halogenen. Dies laesst eine erhoehte Emission von Schwermetallverbindungen und Chloriden mit dem Rauchgas bzw. Vergasungsgas erwarten. Es muss in jedem Fall ueberprueft werden, ob die vorhandene Rauchgasreinigung ausreicht, wenn bei der Mitverbrennung/-vergasung die Emissionsgrenzwerte der 17. BImSchV zur Anwendung kommen. Als Bewertungs- und Optimierungsmethode fuer derartige Hochtemperaturprozesse setzt sich die thermodynamische Modellierung zunehmend durch. (orig./SR)

  8. Heater test in the Opalinus Clay of the Mont Terri URL. Gas release and water redistribution - Contribution to heater experiment (HE); Rock and bentonite thermo-hydro-mechanical (THM) processes in the nearfield

    International Nuclear Information System (INIS)

    Jockwer, N.; Wieczorek, K.

    2006-06-01

    Beside salt and granite, clay formations are investigated as potential host rocks for disposing radioactive waste. In Switzerland in the canton Jura close to the city of St. Ursanne, an underground laboratory was built in the vicinity of the reconnaissance gallery of a motorway tunnel. Since 1995, a consortium of 12 international organisations is running this laboratory for investigating the suitability of the Opalinus clay formation with regard to disposal of radioactive waste. In 1999, the Heater Experiment B (HE-B) was started for investigating the coupled thermo-hydro-mechanical (THM) processes of the Opalinus clay in interaction with the bentonite buffer. The principal contractors of this project were the Bundesanstalt fuer Geowissenschaften und Rohstoffe (BGR), the Empresa Nacional de Residuos Radiactivos S. A. (ENRESA), the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, and the National Cooperative for the Disposal of Radioactive Waste (NAGRA). GRS participated in that experiment for determining the subjects of gas generation, gas release, water content, and water redistribution in the Opalinus clay during heating. This was achieved by analysing gas and water samples from the test field before, during, and after the heating period and by performing geoelectric tomography measurements in the heated region. The in-situ measurements were supported by an additional laboratory programme. This report deals with the work of GRS performed in this project during the years 1999 to 2005. All the results obtained in the frame of the project are presented. Additional laboratory measurements conducted by the Pore Water Laboratory at CIEMAT in Madrid are also presented. The participation of GRS was funded by German Ministry of Economics and Labour (BMWA) under the contract No. 02 E 9602 and by the Commission of the European Communities under the contract No. FIKW.CT-2001-00132. (orig.)

  9. Analysis of loss of offsite power events reported in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Volkanovski, Andrija, E-mail: Andrija.VOLKANOVSKI@ec.europa.eu [European Commission, Joint Research Centre, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Ballesteros Avila, Antonio; Peinador Veira, Miguel [European Commission, Joint Research Centre, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Kančev, Duško [Kernkraftwerk Goesgen-Daeniken AG, CH-4658 Daeniken (Switzerland); Maqua, Michael [Gesellschaft für Anlagen-und-Reaktorsicherheit (GRS) gGmbH, Schwertnergasse 1, 50667 Köln (Germany); Stephan, Jean-Luc [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), BP 17 – 92262 Fontenay-aux-Roses Cedex (France)

    2016-10-15

    Highlights: • Loss of offsite power events were identified in four databases. • Engineering analysis of relevant events was done. • The dominant root cause for LOOP are human failures. • Improved maintenance procedures can decrease the number of LOOP events. - Abstract: This paper presents the results of analysis of the loss of offsite power events (LOOP) in four databases of operational events. The screened databases include: the Gesellschaft für Anlagen und Reaktorsicherheit mbH (GRS) and Institut de Radioprotection et de Sûreté Nucléaire (IRSN) databases, the IAEA International Reporting System for Operating Experience (IRS) and the U.S. Licensee Event Reports (LER). In total 228 relevant loss of offsite power events were identified in the IRSN database, 190 in the GRS database, 120 in U.S. LER and 52 in IRS database. Identified events were classified in predefined categories. Obtained results show that the largest percentage of LOOP events is registered during On power operational mode and lasted for two minutes or more. The plant centered events is the main contributor to LOOP events identified in IRSN, GRS and IAEA IRS database. The switchyard centered events are the main contributor in events registered in the NRC LER database. The main type of failed equipment is switchyard failures in IRSN and IAEA IRS, main or secondary lines in NRC LER and busbar failures in GRS database. The dominant root cause for the LOOP events are human failures during test, inspection and maintenance followed by human failures due to the insufficient or wrong procedures. The largest number of LOOP events resulted in reactor trip followed by EDG start. The actions that can result in reduction of the number of LOOP events and minimize consequences on plant safety are identified and presented.

  10. Radiation hazards and radiation protection in dental X-ray diagnostics. Guideline for students of dentistry, dental orthopedics and dentists. Strahlengefaehrdung und Strahlenschutz in der zahnaerztlichen Roentgendiagnostik. Leitfaden fuer Studierende der Zah-Mund-Kieferheilkunde und Zahnaerzte

    Energy Technology Data Exchange (ETDEWEB)

    Kirsch, T [ed.

    1977-01-01

    Questions concerning technical-radiological-practical activities with regard to radiation hazards for patient and dentist as well as radiation protection measures are dealt with comprehensively. Recent findings in the field of radiation physics and radiation genetics are taken into account. The annex contains the text of the X-ray Ordinance.

  11. Review: Christine von Blanckenburg, Birgit Böhm, Hans-Luidger Dienel & Heiner Legewie (2005. Leitfaden für interdisziplinäre Forschergruppen: Projekte initiieren – Zusammenarbeit gestalten [Guidelines for Interdisciplinary Research Teams: Initiating Projects—Developing Cooperation

    Directory of Open Access Journals (Sweden)

    Iris Rittenhofer

    2008-01-01

    Full Text Available Today, project-oriented work is an integral part of academic life. However, not all academics are ready to cope with this organizational aspect of scientific work or with the management of research teams. "Guidelines for Interdisciplinary Research Teams" provides a detailed outline of the various project stages, the potential conflicts and burgeoning power issues, as well as the basics and techniques of moderation. This volume offers excellent insight into the scientific enterprise and provides useful strategic options for managing teamwork. Thus, the volume is suitable for two purposes, namely as a set of guidelines for those inexperienced in scientific cooperation, and as a reference book for those who want to master their previous project experiences and utilize them in future enterprises. However, the intercultural aspect of scientific project organization is not discussed in the volume. URN: urn:nbn:de:0114-fqs0801179

  12. Power transmission in combined compressors comprising a radial and side channel stage. Final report and appendices; Untersuchungen ueber die Energieuebertragung in kombinierten Verdichtern aus Radial- und Seitenkanalstufe. Abschlussbericht und Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Surek, D.

    2001-07-30

    In the field of turbo-compressors, the following problems must be solved in order to extend the range of operation: (a) Prevention of rotating stall at part load; (b) Extension of the permissible operating range at part load; (c) Extension of the operation range of radial and side channel compressors in higher vacuum below p{sub s}=50kPa. (c) can be achieved by changing the flow pattern in the rotor and in the region of interaction between the blade wheel and guide wheel of radial compressors or by actively influencing transient flow, e.g. by coupling radial compressor stages with a side channel compressor stage as final stage. The contribution goes into detail about the latter solution. [German] Fuer den Turboverdichterbau sind gegenwaertig folgende Probleme zur Erweiterung der Betriebsbereiche dringend zu loesen: (a) Vermeiden oder beseitigen von Rotating Stall im Teillastbereich,(b) Erweiterung des zulaessigen Arbeitsbereiches im Teillastgebiet, (c) Erschliessung des Arbeitsbereichs von Radial- und Seitenkanalverdichtern im hoeheren Vakuumbereich unterhalb von p{sub s}=50 kPa. Die Erweiterung des zulaessigen Arbeitsbereichs im Teillastgebiet kann durch Veraenderung der Stroemungsstruktur im Laufrad und im Interaktionsbereich zwischen Lauf- und Leitrad von Radialverdichtern oder durch die aktive Beeinflussung der instationaeren Stroemung z.B. durch Kopplung von Radialverdichterstufen mit einer Seitenkanalverdichterstufe als Endstufe erfolgen. Seitenkanalverdichter verfuegen ueber stabile Kennlinien im gesamten Betriebsbereich. Im Kombinationsbetrieb einer Radialverdichterstufe mit nach- oder vorgeschalteter Seitenkanalverdichterstufe praegte die Seitenkanalverdichterstufe dem Kombinationsverdichter ihr stabiles Kennlinienverhalten auf, so dass sich eine stabile Gesamtkennlinie ergibt. Eine Pumpgrenze tritt nicht mehr auf, so dass der Betrieb von Verdichterkombinationen aus Radial- und Seitenkanalstufe im gesamten Kennlinienbereich moeglich ist. Die nachgeschaltete Seitenkanalstufe mit der eigenen instationaeren turbulenten Wirbelstroemung beeinflusst die Stroemung der Radialverdichterstufe positiv, so dass die Druckzahl der Radialverdichterstufe im Kombinationsbetrieb gegenueber dem Einzelbetrieb um 2,3% erhoeht und der Arbeitsbereich zu groesseren und auch zu wesentlich kleineren Volumenstroemen verschoben werden kann. Die Ursachen fuer diese Beeinflussung der Kennlinie der Radialverdichterstufe durch die Seitenkanalverdichterstufe wurden durch die Untersuchung der instationaeren Druckschwingungen in beiden Verdichterstufen und am Druckstutzen des Verdichters ermittelt. Eine nachgeschaltete Seitenkanalverdichterstufe wirkt sich noch staerker auf die instationaere Stroemung in der Radialverdichterstufe aus als die vorgeschaltete Seitenkanalverdichterstufe. (orig.)

  13. Sites with nuclear facilities in the state of dismantling and their future from the public perspective; Standorte mit kerntechnischen Anlagen im Rueckbau und deren Zukunft aus der Perspektive der Bevoelkerung

    Energy Technology Data Exchange (ETDEWEB)

    Kretz, Simon Philipp

    2015-07-17

    The thesis on the public perspective at sites of nuclear facility dismantling covers the following issues: the change of German energy landscapes under social and political points of view, theoretical frame of the work, combination of empirical studies and the theoretical approaches in a space concept, action model and hypotheses on the situation and development in communities with nuclear facilities in the state of dismantling, description of the interviewees, and the empirical results of the interviews.

  14. Reducing the network load and optimization of the economic efficiency of CHP plants by forecast-guided control; Verringerung der Netzbelastung und Optimierung der Wirtschaftlichkeit von KWK-Anlagen durch prognosegefuehrte Steuerung

    Energy Technology Data Exchange (ETDEWEB)

    Glaser, Daniel; Adelhardt, Stefan [Erlangen-Nuernberg Univ., Erlangen (Germany). Lehrstuhl fuer Sensorik; beECO GmbH, Erlangen (Germany)

    2012-07-01

    Heat-guided combined heat and power (CHP) plants often cause large compensation energy amounts, additional costs to the operator respectively and another burden on the parent network. The balance energy is caused by errors in the production forecast whose quality heavily depends on the heat load performance. This paper identifies the forecasting problems with heat-guided CHP and reveals how the accompanying cost and the network burden can be reduced. This is achieved by an improvement of the forecast in conjunction with a forecast-guided control without affecting the heat supply. In addition, an outlook on further measures to the earnings with the system is presented. (orig.)

  15. The whole spectrum of alcohol-related changes in the CNS. Practical MR and CT imaging guidelines for daily clinical use; Alkoholinduzierte ZNS-Veraenderungen in der bildgebenden Diagnostik. Ein CT- und MRT-Leitfaden fuer die klinische Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Keil, V.C.; Greschus, S.; Hadizadeh, D.R.; Schild, H.H. [University Hospital Bonn (Germany). Dept. of Radiology; Schneider, C. [University Hospital Bonn (Germany). Dept. of Neurology

    2015-12-15

    Alcohol addiction is the most common drug addiction. Alcohol passes both the placenta as well as the blood-brain barrier and is in multiple ways neurotoxic. Liver diseases and other systemic alcohol-related diseases cause secondary damage to the CNS. Especially in adolescents, even a single episode of severe alcohol intoxication (''binge drinking'') may result in life-threatening neurological consequences. Alcohol-related brain and spinal cord diseases derive from multiple causes including impairment of the cellular metabolism, often aggravated by hypovitaminosis, altered neurotransmission, myelination and synaptogenesis as well as alterations in gene expression. Modern radiological diagnostics, MRI in particular, can detect the resulting alterations in the CNS with a high sensitivity. Morphological aspects often strongly correlate with clinical symptoms of the patient. It is less commonly known that many diseases considered as ''typically alcohol-related'', such as Wernicke's encephalopathy, are to a large extent not alcohol-induced. Visible CNS alterations are thus non-pathognomonic and demand careful evaluation of differential diagnoses. This review article elucidates the pathogenesis, clinical aspects and radiological image features of the most common alcohol-related CNS diseases and their differential diagnoses.

  16. Plate heat exchangers in air conditioning applications. Development of air-coolers, air-heaters and air-conditioning units with low pressure loss. Plattenwaermetauscher in raumlufttechnischen Anlagen. Entwicklung stroemungsoptimierter Luftkuehler, Lufterhitzer und Klimageraete

    Energy Technology Data Exchange (ETDEWEB)

    Bach, H; Diemer, R; Eisenmann, G; Goettling, D; Madjidi, M

    1989-08-01

    To prepare the development of a water to air plate heat exchanger the state of the art, i.e. the technological knowhow and the design basis are given. The concept and ideas are presented which lead to a slightly wavy plate. Furthermore an exemplary design of a plate heat exchanger and an air-conditioning unit is described and finally the application of plate heat exchangers as direct evaporators and the potential icing problems are investigated. Comparing measured and calculated data shows that the performance of plates with plane surfaces can be predicted fairly well by the presented design methods. The performance of plates with strongly wavy surface however has to be measured. Optimization calculations yield to an air gap of slightly over 4 mm. Comparison with an air-conditioning unit demonstrates that the strongest advantage is for the air cooler (one third of the pressure loss) that a new concept of an air-conditioning unit has lower losses in the fan unit and that it does not need an eliminator. This results in half the volume for the new unit, in a pressure drop of 88%, fan power of 90% and fan revolutions of 50%. (orig./GL).

  17. Containment Modelling with the ASTEC Code

    International Nuclear Information System (INIS)

    Sadek, Sinisa; Grgic, Davor

    2014-01-01

    ASTEC is an integral computer code jointly developed by Institut de Radioprotection et de Surete Nucleaire (IRSN, France) and Gesellschaft fur Anlagen-und Reaktorsicherheit (GRS, Germany) to assess the nuclear power plant behaviour during a severe accident (SA). It consists of 13 coupled modules which compute various SA phenomena in primary and secondary circuits of the nuclear power plants (NPP), and in the containment. The ASTEC code was used to model and to simulate NPP behaviour during a postulated station blackout accident in the NPP Krsko, a two-loop pressurized water reactor (PWR) plant. The primary system of the plant was modelled with 110 thermal hydraulic (TH) volumes, 113 junctions and 128 heat structures. The secondary system was modelled with 76 TH volumes, 77 junctions and 87 heat structures. The containment was modelled with 10 TH volumes by taking into account containment representation as a set of distinctive compartments, connected with 23 junctions. A total of 79 heat structures were used to simulate outer containment walls and internal steel and concrete structures. Prior to the transient calculation, a steady state analysis was performed. In order to achieve correct plant initial conditions, the operation of regulation systems was modelled. Parameters which were subjected to regulation were the pressurizer pressure, the pressurizer narrow range level and steam mass flow rates in the steam lines. The accident analysis was focused on containment behaviour, however the complete integral NPP analysis was carried out in order to provide correct boundary conditions for the containment calculation. During the accident, the containment integrity was challenged by release of reactor system coolant through degraded coolant pump seals and, later in the accident following release of the corium out of the reactor pressure vessel, by the molten corium concrete interaction and direct containment heating mechanisms. Impact of those processes on relevant

  18. Ethical aspects in connection with the disposal of radioactive wastes

    International Nuclear Information System (INIS)

    Boetsch, W.

    2003-01-01

    The progress of modern natural and technological science and their far-reaching consequences affecting the distant future require increasingly practice-oriented ethical concepts. In the discussions about responseable acting, the question of the ethical tenability of nuclear energy nowadays takes a special position. Above all the problem of the disposal of radioactive wastes - the effects of which on the distant future have to be prognosticated - is controversially discussed in society. The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) commissioned Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS) in the context of the project ''Disposal of radioactive wastes in the context of ethical objectives'' to summarise the current national and international status of ethical aspects in connection with the disposal of radioactive wastes. One aim of this report is to derive criteria to form the basis of a comprehensive discussion of the ethical aspects of the disposal of radioactive wastes. These criteria are to describe, as far as possible, all content-related aspects that result from radioactive waste disposal. The issues in this report resulting from the opinions, comments and publications presented are to serve as a basis for an experts' meeting at which the important ethical criteria concerning the responsible management of radioactive waste disposal are to be discussed at an interdisciplinary level with all those involved. The results of this report are based on an investigation which gathered the available national and international statements, principles, and criteria relating to the ethical aspects of the disposal of radioactive wastes and to sustainable development in the context of the technological impact assessment up to beginning of 2000. In the meantime, the debate in Germany has become somewhat more pragmatic, i. a. due to the work of the research group ''Arbeitskreis Auswahlverfahren Endlagerstandorte (AkEnd)'' and

  19. Statistical analysis of events related to emergency diesel generators failures in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Kančev, Duško, E-mail: dusko.kancev@ec.europa.eu [European Commission, DG-JRC, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Duchac, Alexander; Zerger, Benoit [European Commission, DG-JRC, Institute for Energy and Transport, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Maqua, Michael [Gesellschaft für Anlagen-und-Reaktorsicherheit (GRS) mbH, Schwetnergasse 1, 50667 Köln (Germany); Wattrelos, Didier [Institut de Radioprotection et de Sûreté Nucléaire (IRSN), BP 17 - 92262 Fontenay-aux-Roses Cedex (France)

    2014-07-01

    Highlights: • Analysis of operating experience related to emergency diesel generators events at NPPs. • Four abundant operating experience databases screened. • Delineating important insights and conclusions based on the operating experience. - Abstract: This paper is aimed at studying the operating experience related to emergency diesel generators (EDGs) events at nuclear power plants collected from the past 20 years. Events related to EDGs failures and/or unavailability as well as all the supporting equipment are in the focus of the analysis. The selected operating experience was analyzed in detail in order to identify the type of failures, attributes that contributed to the failure, failure modes potential or real, discuss risk relevance, summarize important lessons learned, and provide recommendations. The study in this particular paper is tightly related to the performing of statistical analysis of the operating experience. For the purpose of this study EDG failure is defined as EDG failure to function on demand (i.e. fail to start, fail to run) or during testing, or an unavailability of an EDG, except of unavailability due to regular maintenance. The Gesellschaft für Anlagen und Reaktorsicherheit mbH (GRS) and Institut de Radioprotection et de Sûreté Nucléaire (IRSN) databases as well as the operating experience contained in the IAEA/NEA International Reporting System for Operating Experience and the U.S. Licensee Event Reports were screened. The screening methodology applied for each of the four different databases is presented. Further on, analysis aimed at delineating the causes, root causes, contributing factors and consequences are performed. A statistical analysis was performed related to the chronology of events, types of failures, the operational circumstances of detection of the failure and the affected components/subsystems. The conclusions and results of the statistical analysis are discussed. The main findings concerning the testing

  20. Initiation and patterning of the snake dentition are dependent on Sonic hedgehog signaling.

    Science.gov (United States)

    Buchtová, Marcela; Handrigan, Gregory R; Tucker, Abigail S; Lozanoff, Scott; Town, Liam; Fu, Katherine; Diewert, Virginia M; Wicking, Carol; Richman, Joy M

    2008-07-01

    Here we take the first look at cellular dynamics and molecular signaling in the developing snake dentition. We found that tooth formation differs from rodents in several respects. The majority of snake teeth bud off of a deep, ribbon-like dental lamina rather than as separate tooth germs. Prior to and after dental lamina ingrowth, we observe asymmetries in cell proliferation and extracellular matrix distribution suggesting that localized signaling by a secreted protein is involved. We cloned Sonic hedgehog from the African rock python Python sebae and traced its expression in the species as well as in two other snakes, the closely-related Python regius and the more derived corn snake Elaphe guttata (Colubridae). We found that expression of Shh is first confined to the odontogenic band and defines the position of the future dental lamina. Shh transcripts in pythons are progressively restricted to the oral epithelium on one side of the dental lamina and remain in this position throughout the prehatching period. Shh is expressed in the inner enamel epithelium and the stellate reticulum of the tooth anlagen, but is absent from the outer enamel epithelium and its derivative, the successional lamina. This suggests that signals other than Shh are responsible for replacement tooth formation. Functional studies using cyclopamine to block Hh signaling during odontogenesis prevented initiation and extension of the dental lamina into the mesenchyme, and also affected the directionality of this process. Further, blocking Hh signaling led to disruptions of the inner enamel epithelium. To explore the role of Shh in lamina extension, we looked at its expression in the premaxillary teeth, which form closer to the oral surface than elsewhere in the mouth. Oral ectodermal Shh expression in premaxillary teeth is lost soon after the teeth form reinforcing the idea that Shh is controlling the depth of the dental lamina. In summary, we have found diverse roles for Shh in patterning the

  1. Implementation of new concepts for space HVAC systems in domestic buildings in consideration of cost, consumption and user comfort. Final report; Umsetzung neuer Konzepte der technischen Gebaeudeausruestung im Wohnungsbau unter Beruecksichtigung von Kosten, Verbraeuchen und Nutzerkomfort. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F.; Sucic, D.; Wendler, M.

    1998-03-01

    The goal of this project was the development of a set of tools for the selection of optimal concepts for HVAC-systems in housing buildings. Several factors are considered. They include technical feasibility, costs for investment, maintenance and operation, energy concumption, environmental impacts and user comfort. It is intended with the help of these tools to identify the most important factors which influence energy consumption and to suggest simple and cost effective measures to reduce energy consumption. Measures include improvements of the envelope, changes in the HVAC-system and its operation according to the needs to the inhabitants of the building. This report describes these components of this tool set which were developed in the frame of the project WohnKomfort. It lists data and rules chosen. In addition we report experiences which we gained with an prototypical implementation. This implementation allows load calculations for more than 60.000 different buildings applying EN 802 (only one zone model) as calculation method. It also supports selection of heating systems for such buildings by offering an evaluation according to user specified criteria including cost, environment and comfort. (orig./MM) [Deutsch] Ziel des Vorhabens war die Entwicklung eines Instrumentariums zur Auswahl optimaler Konzepte fuer technische Anlagen in Wohngebaeuden unter Beruecksichtigung der Faktoren technische Machbarkeit, Erstellungs-, Betriebskosten, Energieverbrauch, Umweltbelastung und Nutzerkomfort. Mit Hilfe dieses Instrumentariums soll es moeglich werden, die Haupteinflussfaktoren fuer den Energieverbrauch anzugeben und Vorschlaege fuer einfache und kostenguenstige Massnahmen zu seiner Reduzierung auf der Seite des Gebaeudes (bauliche Massnahmen) und der Anlage (technische Massnahmen, Nutzerverhalten) anzugeben. In diesem Bericht beschreiben wir die im Vorhaben entwickelten Komponenten des Instrumentariums, die zugrundeliegenden Daten und Regeln sowie Erfahrungen, die

  2. A universal concept for IV-supported operation management; Ein universelles Konzept fuer die IV-gestuetzte Betriebsfuehrung

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A.

    1997-12-31

    , gibt es eine Vielzahl von Informationen zur Anlage, zu Anlagenausruestungen, zu Prozessablaeufen, zur Schaedigung und zur Instandhaltung, die kaum Fluktuationen aufweisen bzw. sich nur ueber grosse Zeitraeume veraendern (z.B. Anlagen- und Ausruestungsadressen, technische Daten des Systems oder Daten der Instandhaltung). Deshalb bietet es sich an, fuer Betriebsfuehrungssysteme von Produktionsanlagen das Datenhandling fuer Prozessdaten (dynamische Daten) und Anlagendaten (statische Daten) getrennt zu organisieren. (orig./RHM)

  3. Experimental and numerical investigation of heat transfer and pressure drop for innovative gas cooled systems

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, R., E-mail: rodrigo.leija@kit.edu [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz No. 1, 76344 Eggenstein-Leopoldshafen (Germany); Buchholz, S. [Gesellschaft für Anlagen- und Reaktorsicherheit GRS mbH, Boltzmannstraße 2, 85748 Garching (Germany); Suikkanen, H. [Lappeenranta University of Technology, LUT Energy, PO Box 20, FI-53851 Lappeenranta (Finland)

    2015-08-15

    Fluent and at Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) with the code ANSYS CFX.

  4. Continuous monitoring of the wall thickness of pipelines with ultrasonic waves; Dauerueberwachung der Wanddicke von Rohrleitungen mit Ultraschall

    Energy Technology Data Exchange (ETDEWEB)

    Mueck, Andreas [SONOTEC Ultraschallsensorik Halle GmbH, Halle (Saale) (Germany); Imhof, Dietmar [TUeV NORD MPA GmbH und Co.KG, Leuna (Germany)

    2015-07-01

    Pipelines in industrial plants must be constantly monitored due to occurring erosion and corrosion. The determination of the residual wall thickness is generally carried out with ultrasound. Often, the critical points are difficult to access and the pipes insulated. The preparation and evaluation of a measurement is therefore very costly. The measuring system SONOWALL S ultrasonic probes are firmly attached to the pipeline and installed into isolation. The number and position of the probes can be freely selected. Often, the load is not known exactly why the monitoring of the pipe wall thickness over the entire circumference is necessary. The acoustic coupling to the pipe is done with proven adhesives that do not lose their adhesive strength even under changing ambient temperatures. The connecting cables are housed away up to 20 m in an easily accessible place in a terminal box. There can be done a wall thickness measurement with conventional ultrasonic testing devices. By using standardized components, the measuring system meets the requirements of DIN EN 12668 and DIN EN 14127. [German] Rohrleitungen in industriellen Anlagen muessen aufgrund der auftretenden Erosion und Korrosion permanent ueberwacht werden. Die Bestimmung der Restwanddicke erfolgt in der Regel mit Ultraschall. Oftmals sind die kritischen Stellen schwer zugaenglich und die Rohrleitungen isoliert. Die Vor- und Nachbereitung einer Messung ist dadurch sehr aufwendig. Beim Messsystem SONOWALL S werden Ultraschallpruefkoepfe fest an der Rohrleitung angebracht und in die Isolation eingebaut. Die Anzahl und Position der Pruefkoepfe ist dabei frei waehlbar. Oft ist die Belastung nicht genau bekannt, weshalb eine Ueberwachung der Rohrwanddicke ueber den gesamten Umfang notwendig ist. Die akustische Ankopplung an das Rohr erfolgt mit erprobten Klebstoffen, die auch bei wechselnden Umgebungstemperaturen ihre Haftfestigkeit nicht verlieren. Die Anschlusskabel werden bis zu 20m entfernt an einer gut

  5. Ethical aspects in connection with the disposal of radioactive wastes; Ethische Aspekte bei der Endlagerung radioaktiver Abfaelle. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Boetsch, W.

    2003-07-01

    The progress of modern natural and technological science and their far-reaching consequences affecting the distant future require increasingly practice-oriented ethical concepts. In the discussions about responseable acting, the question of the ethical tenability of nuclear energy nowadays takes a special position. Above all the problem of the disposal of radioactive wastes - the effects of which on the distant future have to be prognosticated - is controversially discussed in society. The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) commissioned Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS) in the context of the project ''Disposal of radioactive wastes in the context of ethical objectives'' to summarise the current national and international status of ethical aspects in connection with the disposal of radioactive wastes. One aim of this report is to derive criteria to form the basis of a comprehensive discussion of the ethical aspects of the disposal of radioactive wastes. These criteria are to describe, as far as possible, all content-related aspects that result from radioactive waste disposal. The issues in this report resulting from the opinions, comments and publications presented are to serve as a basis for an experts' meeting at which the important ethical criteria concerning the responsible management of radioactive waste disposal are to be discussed at an interdisciplinary level with all those involved. The results of this report are based on an investigation which gathered the available national and international statements, principles, and criteria relating to the ethical aspects of the disposal of radioactive wastes and to sustainable development in the context of the technological impact assessment up to beginning of 2000. In the meantime, the debate in Germany has become somewhat more pragmatic, i. a. due to the work of the research group &apos

  6. The German competence network on nuclear technology

    International Nuclear Information System (INIS)

    Kuczera, B.; Fritz, P.

    2004-01-01

    Full text: The present German energy policy is based on the phase-out of nuclear electricity generation, which means that the last of the currently operating eighteen German nuclear power plants will run until about 2022. While the plants will be shut down one after the other, decommissioning will start together with interim storage of t