Photo catalytic degradation of nitrobenzene using nanocrystalline TiO2 photo catalyst doped with Zn ions

International Nuclear Information System (INIS)

Reynoso S, E. A.; Perez S, S.; Reyes C, A. P.; Castro R, C. L.; Felix N, R. M.; Lin H, S. W.; Paraguay D, F.; Alonso N, G.

2013-01-01

Photo catalysis is a method widely used in the degradation of organic pollutants of the environment. The development of new materials is very important to improve the photo catalytic properties and to find new applications for TiO 2 as a photo catalyst. In this article we reported the synthesis of a photo catalyst based on TiO 2 doped with Zn 2+ ions highly efficient in the degradation of nitrobenzene. The results of photo catalytic activity experiments showed that the Zn 2+ doped TiO 2 is more active that un-doped TiO 2 catalyst with an efficiency of 99% for the nitrobenzene degradation at 120 min with an apparent rate constant of 35 x 10 -3 min -1 . For the characterization of photo catalyst X-ray diffraction, transmission electron microscopy and Raman spectroscopy were used. (Author)

Improving Door-to-balloon Time by Decreasing Door-to-ECG time for Walk-in STEMI Patients

Directory of Open Access Journals (Sweden)

Coyne, Christopher J.

2014-12-01

Full Text Available Introduction: The American Heart Association/American College of Cardiology guidelines recommend rapid door-to-electrocardiography (ECG times for patients with ST-segment elevation myocardial infarction (STEMI. Previous quality improvement research at our institution revealed that we were not meeting this benchmark for walk-in STEMI patients. The objective is to investigate whether simple, directed changes in the emergency department (ED triage process for potential cardiac patients could decrease door-to-ECG times and secondarily door-to-balloon times. Methods: We conducted an interventional study at a large, urban, public teaching hospital from April 2010 to June 2012. All patients who walked into the ED with a confirmed STEMI were enrolled in the study. The primary intervention involved creating a chief complaint-based “cardiac triage” designation that streamlined the evaluation of potential cardiac patients. A secondary intervention involved moving our ECG technician and ECG station to our initial triage area. The primary outcome measure was door-to-ECG time and the secondary outcome measure was door-to-balloon time. Results: We enrolled 91 walk-in STEMI patients prior to the intervention period and 141 patients after the invention. We observed statistically significant reductions in door-to-ECG time (43±93 to 30±72 minutes, median 23 to 14 minutes p<0.01, ECG-to-activation time (87±134 to 52±82 minutes, median 43 to 31 minutes p<0.01, and door-to-balloon time (134±146 to 84±40 minutes, median 85 -75 minutes p=0.03. Conclusion: By creating a chief complaint-based cardiac triage protocol and by streamlining ECG completion, walk-in STEMI patients are systematically processed through the ED. This is not only associated with a decrease in door-to-balloon time, but also a decrease in the variability of the time sensitive intervals of door-to-ECG and ECG-to-balloon time. [West J Emerg Med. 2015;16(1:184–189.

Real-time door detection for indoor autonomous vehicle

Science.gov (United States)

He, Zhihao; Zhu, Ming

2017-07-01

Indoor Autonomous Vehicle(IAV) is used in many indoor scenes. Such as hotels and hospitals. Door detection is a key issue to guide the IAV into rooms. In this paper, we consider door detection in the use of indoor navigation of IAV. Since real-time properties are important for real-world IAV, the detection algorithm must be fast enough. Most monocular-camera based door detection model need a perfect detection of the four line segments of the door or the four corners. But in many situations, line segments could be extended or cut off. And there could be many false detected corners. And few of them can distinguish doors from door-like objects with door-like shape effectively. We proposed a 2-D vision model of the door that is made up of line segments. The number of parts detected is used to determine the possibility of a door. Our algorithm is tested on a database of doors.1 The robustness and real-time are verified. The precision is 89.4%. Average time consumed for processing a 640x320 figure is 44.73ms.

Comparing energy use and environmental emissions of reinforced wood doors and steel doors

Science.gov (United States)

Lynn Knight; Melissa Huff; Janet I. Stockhausen; Robert J. Ross

2005-01-01

The USDA Forest Service Forest Products Laboratory has patented a technology that incorporates fiberglass-reinforced wood into the structure of wood doors and other wood building products. The process of reinforcing wood doors with epoxy and fiberglass increases the strength and durability of the product. Also, it allows the use of low-value, small-diameter wood which...

Development of wide range charge integration application specified integrated circuit for photo-sensor

Energy Technology Data Exchange (ETDEWEB)

Katayose, Yusaku, E-mail: katayose@ynu.ac.jp [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan); Ikeda, Hirokazu [Institute of Space and Astronautical Science (ISAS)/Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Tanaka, Manobu [National Laboratory for High Energy Physics, KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Shibata, Makio [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan)

2013-01-21

A front-end application specified integrated circuit (ASIC) is developed with a wide dynamic range amplifier (WDAMP) to read-out signals from a photo-sensor like a photodiode. The WDAMP ASIC consists of a charge sensitive preamplifier, four wave-shaping circuits with different amplification factors and Wilkinson-type analog-to-digital converter (ADC). To realize a wider range, the integrating capacitor in the preamplifier can be changed from 4 pF to 16 pF by a two-bit switch. The output of a preamplifier is shared by the four wave-shaping circuits with four gains of 1, 4, 16 and 64 to adapt the input range of ADC. A 0.25-μm CMOS process (of UMC electronics CO., LTD) is used to fabricate the ASIC with four-channels. The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC and the noise performance of 0.46 fC + 6.4×10{sup −4} fC/pF. -- Highlights: ► A front-end ASIC is developed with a wide dynamic range amplifier. ► The ASIC consists of a CSA, four wave-shaping circuits and pulse-height-to-time converters. ► The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC.

A perceptual metric for photo retouching.

Science.gov (United States)

Kee, Eric; Farid, Hany

2011-12-13

In recent years, advertisers and magazine editors have been widely criticized for taking digital photo retouching to an extreme. Impossibly thin, tall, and wrinkle- and blemish-free models are routinely splashed onto billboards, advertisements, and magazine covers. The ubiquity of these unrealistic and highly idealized images has been linked to eating disorders and body image dissatisfaction in men, women, and children. In response, several countries have considered legislating the labeling of retouched photos. We describe a quantitative and perceptually meaningful metric of photo retouching. Photographs are rated on the degree to which they have been digitally altered by explicitly modeling and estimating geometric and photometric changes. This metric correlates well with perceptual judgments of photo retouching and can be used to objectively judge by how much a retouched photo has strayed from reality.

Photo catalytic degradation of nitrobenzene using nanocrystalline TiO{sub 2} photo catalyst doped with Zn ions

Energy Technology Data Exchange (ETDEWEB)

Reynoso S, E. A.; Perez S, S.; Reyes C, A. P.; Castro R, C. L.; Felix N, R. M.; Lin H, S. W. [Instituto Tecnologico de Tijuana, Centro de Graduados e Investigacion, Apdo. Postal 1166, 22000 Tijuana, Baja California (Mexico); Paraguay D, F. [Centro de Investigacion en Materiales Avanzados, Apdo. Postal 311109, Chihuahua (Mexico); Alonso N, G. [UNAM, Centro de Nanociencias y Nanotecnologia, Carretera Tijuana-Ensenada Km 107, Apdo. Postal 356, 22800 Ensenada, Baja California (Mexico)

2013-07-01

Photo catalysis is a method widely used in the degradation of organic pollutants of the environment. The development of new materials is very important to improve the photo catalytic properties and to find new applications for TiO{sub 2} as a photo catalyst. In this article we reported the synthesis of a photo catalyst based on TiO{sub 2} doped with Zn{sup 2+} ions highly efficient in the degradation of nitrobenzene. The results of photo catalytic activity experiments showed that the Zn{sup 2+} doped TiO{sub 2} is more active that un-doped TiO{sub 2} catalyst with an efficiency of 99% for the nitrobenzene degradation at 120 min with an apparent rate constant of 35 x 10{sup -3} min{sup -1}. For the characterization of photo catalyst X-ray diffraction, transmission electron microscopy and Raman spectroscopy were used. (Author)

Nuclear Storage Overpack Door Actuator and Alignment Apparatus

International Nuclear Information System (INIS)

Andreyko, Gregory M.

2005-01-01

The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage

Design and Construction of Pool Door for Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door.

Design and Construction of Pool Door for Research Reactor

International Nuclear Information System (INIS)

Jung, Kwangsub; Lee, Sangjin; Choi, Jinbok; Oh, Jinho; Lee, Jongmin

2016-01-01

The pool door is a structure to isolate the reactor pool from the service pool for maintenance. The pool door is installed before the reactor pool is drained. The pool door consists of structural component and sealing component. The main structures of the pool door are stainless steel plates and side frames. The plates and frames are assembled by welded joints. Lug is welded at the top of the plate. The pool door is submerged in the pool water when it is used. Materials of the pool door should be resistive to corrosion and radiation. Stainless steel is used in structural components and air nozzle assemblies. Features of design and construction of the pool door for the research reactor are introduced. The pool door is designed to isolate the reactor pool for maintenance. Structural analysis is performed to evaluate the structural integrity during earthquake. Tests and inspections are also carried out during construction to identify the safety and function of the pool door

An unexpected knock on Corrigan's secret door.

Science.gov (United States)

Woywodt, Alexander

2010-10-01

Corrigan's secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802-80). It is claimed that Corrigan's outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan's secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan's secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a 'secret door' is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life.

Holiday Door Decorating Contest Brings Cheer | Poster

Science.gov (United States)

By Carolynne Keenan, Contributing Writer Other than the time of year, what do the following have in common: the leg lamp from the movie “A Christmas Story,” a compilation of silly holiday jokes, a gingerbread house, and Santa on a motorcycle? All four were among the individual door winners for the Holiday Door Decorating Contest, held at NCI at Frederick in December. Employees dressed up their office doors, hallways, and even stairwells to participate. Entries for the contest included individual office doors as well as groups. Some employees even “decked the halls” of whole office buildings to participate.

Opening the doors: building brand awareness.

Science.gov (United States)

John, Judith; McCartney, Rob

2006-01-01

In search of a credible and cost-effective way to promote Mount Sinai Hospital (Mount Sinai) and educate a broad public, Mount Sinai opened its doors wide to The Globe and Mail (The Globe). The result was a three-part national feature series that told Mount Sinai's compelling story, provided third-party credibility and confirmed the value of proactive media relations. The series engaged our staff, energized our volunteers and reached both stakeholders and the general public on an emotional level. It also generated the more than dollars 6 million worth of equivalent advertising space it would have required for Mount Sinai to reach this national audience.

Design Report for ACP Hot Cell Rear Door

Energy Technology Data Exchange (ETDEWEB)

Ku, J. H.; Kwon, K. C.; Choung, W. M.; Cho, I. J.; Kook, D. H.; Lee, W. K.; You, G. S.; Lee, E. P.; Park, S. W

2005-12-15

A hot-cell facility was constructed at the IMEF building for the demonstrate ACP process. ACP hot-cell consists of process cell and maintenance cell, and each cell has rear door. Since this facility was constructed at basement floor, all process materials, equipment and radioactive materials are take in and out through the rear door. Also, this door can be an access route of workers for the maintenance works. Therefore ACP hot-cell rear doors must maintain the radiation shielding, sealing, mechanical and structural safety. This report presents design criteria, design contents of each part and driving part. It was confirmed that the rear doors sufficiently maintain the safety through the structural analysis and shielding analysis. Also, it was confirmed that the rear doors were constructed as designed by the gamma scanning test after the installation.

Modal analysis of pool door in water tank

Energy Technology Data Exchange (ETDEWEB)

Kim, Kang Soo; Jeong, Kyeong Hoon; Park, Chan Gook; Koo, In Soo [KAERI, Daejeon (Korea, Republic of)

2012-10-15

A pool door is installed at the chase of the pool gate by means of an overhead crane in the building of a research reactor. The principal function of the pool door, which is located between the reactor pool and service pool, is to separate the reactor pool from the service pool for the maintenance and/or the removal of the equipment either in the reactor pool or service pool. The pool door consists of stainless steel plates supported by structural steel frames and sealing components. The pool door is equipped with double inflatable gaskets. The configuration of the pool door is shown in Figure 1. The FEM analysis and theoretical calculation by the formula were performed to evaluate the natural frequency for the pool door in the water. The results from the two methods were compared.

Design Report for ACP Hot Cell Rear Door

International Nuclear Information System (INIS)

Ku, J. H.; Kwon, K. C.; Choung, W. M.; Cho, I. J.; Kook, D. H.; Lee, W. K.; You, G. S.; Lee, E. P.; Park, S. W.

2005-12-01

A hot-cell facility was constructed at the IMEF building for the demonstrate ACP process. ACP hot-cell consists of process cell and maintenance cell, and each cell has rear door. Since this facility was constructed at basement floor, all process materials, equipment and radioactive materials are take in and out through the rear door. Also, this door can be an access route of workers for the maintenance works. Therefore ACP hot-cell rear doors must maintain the radiation shielding, sealing, mechanical and structural safety. This report presents design criteria, design contents of each part and driving part. It was confirmed that the rear doors sufficiently maintain the safety through the structural analysis and shielding analysis. Also, it was confirmed that the rear doors were constructed as designed by the gamma scanning test after the installation

Development, Control, and Evaluation of an Actuated Car Door.

Science.gov (United States)

Strolz, M; Mortl, A; Graf, M; Buss, M

2009-01-01

Actuated car doors are a promising way to increase the convenience of access to cars. We propose an advanced actuation and control concept which can easily be integrated into conventional car doors. By utilizing a linear, nonbackdrivable actuator and various sensors, both automatic and manual door operations are enabled. A discrete state controller ensures a safe operation of the door, including automatic opening and closing. The realization of a supportive, high-quality haptic interaction with the car door for the manual operation is the principal part of our work. Due to the impracticality of a direct measurement of the user interaction force at a car door, we chose impedance control to render the desired dynamics. The impedance was designed to provide a convenient, intuitive, and safe manual handling of the door. We implemented and tested four different impedance control schemes, of which impedance control with actuator force feedback performed best. Two experimental evaluations with 16 and 27 participants revealed a predominant approval of the actuated car door.

SAFETY BULLETIN TIS 2002-03 GLASS DOORS

CERN Multimedia

2002-01-01

Be careful! What happened?   Unsignaled reinforced glass.   Signaled safety glass.   A visitor recently hurt his leg when he walked into a glass door which shattered from the impact. This door was made of reinforced glass, a material which is inappropriate for this kind of use as it is too fragile. Indeed, it shatters into sharp splinters which can cause serious injury. Furthermore, the door was not easily visible (badly lit, no warning signs, ...). Corrective measures Just after the accident: glass doors were signed to make them more visible; replacement of dangerous glass panes planned for 2003. What preventive measures can be taken against this kind of accident? If you are in charge of projects and works: In the call for tender, specify the acceptable shock resistance level of the glass pane; Before the door is mounted, insist on receiving technical documentation and/or certificate of conformity from the supplier; If in doubt, ask advice from the TIS/GS sa...

Bulkhead Door – Critical Evacuation States

Directory of Open Access Journals (Sweden)

Flizikowski Józef

2017-03-01

Full Text Available The article is a preliminary to a modification concept of the sliding watertight bulkhead door used on ships and vessels. Hydraulic or electro-hydraulic drives used to move these doors require complicated and extended pressure installations with large amounts of hydraulic fluid. Well-known operational drawbacks of these installations include high level of noise and possibility of various leaks in the hydraulic system. Being the first in a series, the present article describes and analyses critical states which can take place during evacuation of people through openings in the watertight bulkhead doors on seagoing ships and vessels.

Sweet Spots and Door Stops

Science.gov (United States)

Thompson, Michael; Tsui, Stella; Leung, Chi Fan

2011-01-01

A sweet spot is referred to in sport as the perfect place to strike a ball with a racquet or bat. It is the point of contact between bat and ball where maximum results can be produced with minimal effort from the hand of the player. Similar physics can be applied to the less inspiring examples of door stops; the perfect position of a door stop is…

Doors for memory: A searchable database.

Science.gov (United States)

Baddeley, Alan D; Hitch, Graham J; Quinlan, Philip T; Bowes, Lindsey; Stone, Rob

2016-11-01

The study of human long-term memory has for over 50 years been dominated by research on words. This is partly due to lack of suitable nonverbal materials. Experience in developing a clinical test suggested that door scenes can provide an ecologically relevant and sensitive alternative to the faces and geometrical figures traditionally used to study visual memory. In pursuing this line of research, we have accumulated over 2000 door scenes providing a database that is categorized on a range of variables including building type, colour, age, condition, glazing, and a range of other physical characteristics. We describe an illustrative study of recognition memory for 100 doors tested by yes/no, two-alternative, or four-alternative forced-choice paradigms. These stimuli, together with the full categorized database, are available through a dedicated website. We suggest that door scenes provide an ecologically relevant and participant-friendly source of material for studying the comparatively neglected field of visual long-term memory.

Development of a tornado safe room door from wood Products: door design and impact testing

Science.gov (United States)

Robert H. Falk; James J. Bridwell

2016-01-01

In this study, a tornado safe room door built from wood products and steel sheeting was developed and impact-tested according to tornado safe room standards. Results indicate that an door constructed from as few as two sheets of 23/32-in. (18.26-mm) construction-grade plywood and overlaid with 18-gauge (0.05-in.- (1.27- mm-) thick) steel can pass the required impact...

Sequestered spaces and defective doors in tales by Collins and Riddell

Directory of Open Access Journals (Sweden)

Ilse M. Bussing

2012-11-01

Full Text Available http://dx.doi.org/10.5007/2175-8026.2012n62p99   In nineteenth-century texts the Victorian home is not merely asetting for supernatural activity—it is the protagonist. This articleconsiders how architecture engendered and shaped hauntedspace within Gothic texts by focusing on a single feature—the door—whose symbolic charge has been widely discussedby critics. However, instead of focusing on psychoanalyticor feminist notions commonly attached to this element, thisarticle considers architectural manuals of the day in order to“read” spatial and cultural implications of the door in Victorianhouseholds, arguing that an excessive concern for privacy andconcealment in life translates easily into Gothic fiction, in theform of spatial anxiety and infiltration. The discussion centerson two literary texts: The Dead Secret (1857 by Wilkie Collinsand The Open Door by Charlotte Riddell (1882.

COMPARISON OF RESULTS OF THERMAL TESTS OF BALCONY DOORS

Directory of Open Access Journals (Sweden)

Golubev Stanislav Sergeevich

2012-10-01

Full Text Available Results of thermal tests of balcony doors are presented in the article. In the course of the research project, two types of doors were tested. The first type represents a PVC frame door (width 82 mm; it has a triple glazing (4K-16Ar-4-16Ar-K4; its blank part represents a polystyrene sandwich panel (width 40 mm. The second type represents a PVC frame door (width 82 mm, that has a triple glazing (4K-16Ar-4-16Ar-K4 and composite PVC panels. The testing procedure and processing results are described in the article. The test has demonstrated that the thermal resistance value of the balcony door of the first type exceeds the thermal resistance value of the balcony door of the second type.

29 CFR 1917.114 - Cargo doors.

Science.gov (United States)

2010-07-01

... counterweights shall be guarded. (2) Lift trucks and cranes shall not be used to move mechanically operated doors.... (1) The door shall be connected to its lifting tackle with shackles or equally secure means. (2) Lifting bridles and tackles shall have a safety factor of five, based upon maximum anticipated static...

Design proposal for door thresholds

Directory of Open Access Journals (Sweden)

Smolka Radim

2017-01-01

Full Text Available Panels for openings in structures have always been an essential and integral part of buildings. Their importance in terms of a building´s functionality was not recognised. However, the general view on this issue has changed from focusing on big planar segments and critical details to sub-elements of these structures. This does not only focus on the forms of connecting joints but also on the supporting systems that keep the panels in the right position and ensure they function properly. One of the most strained segments is the threshold structure, especially the entrance door threshold structure. It is the part where substantial defects in construction occur in terms of waterproofing, as well as in the static, thermal and technical functions thereof. In conventional buildings, this problem is solved by pulling the floor structure under the entrance door structure and subsequently covering it with waterproofing material. This system cannot work effectively over the long term so local defects occur. A proposal is put forward to solve this problem by installing a sub-threshold door coupler made of composite materials. The coupler is designed so that its variability complies with the required parameters for most door structures on the European market.

Gas dynamic laser having shutter doors

International Nuclear Information System (INIS)

Olinger, J.B. Jr.; Wahl, R.L.

1975-01-01

A gas dynamic laser is shown wherein gases containing constituents necessary to obtain a lasing action are passed through a nozzle array and directed into a lasing cavity and through a diffuser to an exit. An opening is located on each side of said lasing cavity with a shutter box outside of said cavity having a shutter door for opening or closing said opening. A mirror box is located behind each shutter box and contains a mirror. These mirrors are aligned with the openings in the lasing cavity with each door positioned between an opening and a mirror. Another outlet opening is positioned downstream of the first opening which provides an outlet opening for a laser beam. A shutter box is located around this opening and also houses a shutter door for opening and closing said opening. The mirror box which extends behind this shutter box includes opening means for permitting the output beam to pass through an aerodynamic window to atmosphere. Actuating means are provided for rapidly opening and closing said shutter doors. Bearing means including recirculating balls are located on the top and bottom of each shutter door to ride in tracks at an angle to the sealing surface on the laser device. Vacuum means are provided to reduce the pressure in the shutter box and mirror box independently of the pressure in the lasing cavity

Development of inverter for elevator door control

Energy Technology Data Exchange (ETDEWEB)

Kim, J.K.; Choi, U.D.; Jung, M.K.; Choi, S.K. [HHI R and D Center (Korea, Republic of); Yun, J.H.; Han, S.B. [HELCO R and D Center (Korea, Republic of)

1995-07-01

Most of the elevator door controllers have been controlled by DC Motors as an actuator. Recently, The control system using AC induction motor and general purpose inverter has been applied to control of elevator door. But there are some difficulties in making use of this system, such as adjustment of door speed pattern, door open-close time, and security of passenger safety. In order to solve these problems, a special inverter has been developed with an encoder feedback. From the result of field-test, we proved that a special inverter with encoder feedback device has come to considerable effect. Until now about 1,200 sets of these inverters are operated in Korea and about 100 sets are operated in South-east Asia. (author). 3 refs., 10 figs., 3 tabs.

Critical element development of double seal door for tritium containment

International Nuclear Information System (INIS)

Kanamori, Naokazu; Kakudate, Satoshi; Oka, Kiyoshi; Nakahira, Masataka; Taguchi, Kou; Obara, Kenjiro; Tada, Eisuke; Shibanuma, Kiyoshi; Seki, Masahiro

1994-08-01

In fusion experimental reactors, the in-vessel components such as blanket are activated due to D-T operation and they have to be assembled and replaced by remote operation through port penetration of plasma vacuum vessel. A double seal door is inevitably required at an interface between vacuum vessel port and maintenance cask in order to avoid the dispersion of tritium and activated dust during in-vessel component handling. The double seal door should have two open/close doors with four seal surfaces so as to keep leak tightness both of the vacuum vessel and the maintenance cask when doors closed, and to provide access space for handling in-vessel components when doors opened. A prototype compact double seal door with an attractive kinematics of parabolic trajectory has been proposed so as to minimize dead space for the door open/close operation, compared with ordinary slide or hinge type door. Based on this design concept, a sub-scaled model of double seal door with trapezoidal cross-section of around 0.2 m 2 has been fabricated. Through the preliminary experiments such as open/close performance, the double seal door mechanism with parabolic trajectory has been successfully demonstrated. As for leak tightness, seal characteristics of a polyimide ring irradiated up to 10 MGy have been measured. (author)

46 CFR 170.270 - Door design, operation, installation, and testing.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Door design, operation, installation, and testing. 170..., operation, installation, and testing. (a) Each Class 1 door must have a quick action closing device... the welding process so that the door frame is not distorted. (e) For each watertight door which is in...

Blower-door techniques for measuring interzonal leakage

Energy Technology Data Exchange (ETDEWEB)

Hult, Erin L.; Sherman, Max H.; Walker, Iain

2013-01-01

Abstract The standard blower door test methods, such as ASTM E779, describe how to use a single blower door to determine the total leakage of a single-zone structure such as a detached single-family home. There are no standard test methods for measuring interzonal leakage in a two-zone or multi-zone building envelope such as might be encountered in with an attached garage or in a multifamily building. Some practitioners have been using techniques that involve making multiple measurements with a single blower door as well as combined measurements using multiple blower doors. Even for just two zones there are dozens of combinations of one-door and two-door test protocols that could conceivably be used to determine the interzonal air tightness. We examined many of these two-zone configurations using both simulation and measured data to estimate the accuracy and precision of each technique for realistic measurement scenarios. We also considered the impact of taking measurements at a single pressure versus over multiple pressures. We compared the various techniques and evaluated them for specific uses. Some techniques work better in one leakage regime; some are more sensitive to wind and other noise; some are more suited to determining only a subset of the leakage values. This paper makes recommendations on which techniques to use or not use for various cases and provides data that could be used to develop future test methods.

Door recognition in cluttered building interiors using imagery and lidar data

Science.gov (United States)

Díaz-Vilariño, L.; Martínez-Sánchez, J.; Lagüela, S.; Armesto, J.; Khoshelham, K.

2014-06-01

Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive)

The Ins and Outs of Modern Doors.

Science.gov (United States)

College Planning & Management, 1999

1999-01-01

Discusses the qualities and trends in modern metal doors for educational facilities that include fire protection and sound-control attributes. Important differences in door manufacturing methods and materials are addressed and sound-transmission class values, ratings, and rating descriptions are listed. (GR)

An unexpected knock on Corrigan’s secret door

Science.gov (United States)

Woywodt, Alexander

2010-01-01

Corrigan’s secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802–80). It is claimed that Corrigan’s outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan’s secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan’s secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a ‘secret door’ is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life. PMID:25984078

Diplopie door monovisie

NARCIS (Netherlands)

Jorien Schouten; Louise Helmer

2017-01-01

Doelstelling: In kaart brengen van de risicofactoren voor het ontwikkelen van binoculaire diplopie na conventionele monovisie door middel van contactlenzen of refractiechirurgie bij presbyopen. Methode: Voor deze literatuurstudie is in maart 2017 gezocht in databanken Pubmed, ScienceDirect en Google

3D Modeling of Building Indoor Spaces and Closed Doors from Imagery and Point Clouds

Directory of Open Access Journals (Sweden)

Lucía Díaz-Vilariño

2015-02-01

Full Text Available 3D models of indoor environments are increasingly gaining importance due to the wide range of applications to which they can be subjected: from redesign and visualization to monitoring and simulation. These models usually exist only for newly constructed buildings; therefore, the development of automatic approaches for reconstructing 3D indoors from imagery and/or point clouds can make the process easier, faster and cheaper. Among the constructive elements defining a building interior, doors are very common elements and their detection can be very useful either for knowing the environment structure, to perform an efficient navigation or to plan appropriate evacuation routes. The fact that doors are topologically connected to walls by being coplanar, together with the unavoidable presence of clutter and occlusions indoors, increases the inherent complexity of the automation of the recognition process. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors based on point clouds and images. The methodology analyses the visibility problem of indoor environments and goes in depth with door candidate detection. The presented approach is tested in real data sets showing its potential with a high door detection rate and applicability for robust and efficient envelope reconstruction.

Taksterfte in Buxus, veroorzaakt door Cylindrocladium buxicola

NARCIS (Netherlands)

Kuik, van A.J.; Dalfsen, van P.

2010-01-01

De laatste jaren wordt de Buxusteelt geplaagd door een ziekte die veroorzaakt wordt door de schimmel Cylindrocladium buxicola. Gezien de snelle uitbreiding van de ziekte is het voor kwekers en afnemers van Buxus van groot belang dat deze problematiek wordt aangepakt. Daar om is begin 2006 in

Volunteers: the key that opens the doors for the Open Days

CERN Multimedia

Antonella Del Rosso

2013-01-01

2013: the year that CERN opens its doors to the public. 2013 is also the approximate number of volunteers needed to ensure that these Open Days (JPO) go ahead smoothly. Whatever your personnel status and function, you, the volunteers, are the key without which the Laboratory’s doors could not really open. Sign up now!   1,500 of you volunteered for the LHC2008 open days to mark the inauguration of the LHC. This year, with roughly 20% more visitors expected across the CERN sites over the two days, the organisers envisage closer to 2,000 volunteers. “We will be holding a wide variety of activities across the Laboratory’s various sites,” explains Virginie Blondeau, the member of the Open Days organising team in charge of recruiting and training volunteers. “As well as guides for the experiments, we will also need volunteers to welcome and direct visitors, to help with logistics and to man the sales points, etc.” The volunteers will rec...

Door recognition in cluttered building interiors using imagery and lidar data

Directory of Open Access Journals (Sweden)

L. Díaz-Vilariño

2014-06-01

Full Text Available Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive

Components for containment enclosures - Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums. 1. ed.

International Nuclear Information System (INIS)

1998-01-01

This part of ISO 11933 specifies requirements for the selection, construction and use of the following leak tight components: doors, airlock chambers, double door transfer systems, leaktight connections for waste drums. Some of the elements, double doors or airlock chambers are described in ISO 11933-1 and ISO 11933-2 as well. Doors having bigger dimensions used for personnel od larger objects are not covered by this document

A Foot Operated Timeout Room Door Latch.

Science.gov (United States)

Foxx, R. M.; And Others

1982-01-01

This report describes the design and implementation of a foot operated timeout room door latch that permits staff members to maintain a misbehaving retarded individual in timeout without locking the door. Use of the latch also frees the staff member involved to record behavioral observations or reinforce appropriate behavior. (Author)

Door valve for fuel handling path

International Nuclear Information System (INIS)

Makishima, Katsuhiko.

1969-01-01

A door valve is provided which seals cover gas from a liquid metal cooled reactor without leakage therefrom. A threaded shaft is screwed into a heavy box press which is packed with lead. The shaft is adapted to be rotated by an electric motor or a manually operated wheel which is disposed outside of the door valve. From the box press a valve plate is suspended by four linkage bars, one for each corner. Each linkage bar is provided with two wheels which are respectively mounted at the connections with the box press and the valve plate. The wheels are carried on the horizontal grooves formed in a door valve casing. In operation the shaft rotates and travels to permit the box press and the valve plate to move into the door valve casing while the valve plate does not contact the casing. When the box press reaches the home position, the wheels drop into the recesses which are disposed at the ends of the grooves, the valve plate is carried on the valve opening, and the box press presses the valve plate to increase the tightness. The valve plate does not suffer wear as it does not over other parts. (Yamaguchi, T.)

Detecting Signage and Doors for Blind Navigation and Wayfinding.

Science.gov (United States)

Wang, Shuihua; Yang, Xiaodong; Tian, Yingli

2013-07-01

Signage plays a very important role to find destinations in applications of navigation and wayfinding. In this paper, we propose a novel framework to detect doors and signage to help blind people accessing unfamiliar indoor environments. In order to eliminate the interference information and improve the accuracy of signage detection, we first extract the attended areas by using a saliency map. Then the signage is detected in the attended areas by using a bipartite graph matching. The proposed method can handle multiple signage detection. Furthermore, in order to provide more information for blind users to access the area associated with the detected signage, we develop a robust method to detect doors based on a geometric door frame model which is independent to door appearances. Experimental results on our collected datasets of indoor signage and doors demonstrate the effectiveness and efficiency of our proposed method.

F-door spaces and F-submaximal spaces

Directory of Open Access Journals (Sweden)

Lobna Dridi

2013-04-01

Full Text Available Submaximal spaces and door spaces play an enigmatic role in topology. In this paper, reinforcing this role, we are concerned with reaching two main goals: The first one is to characterize topological spaces X such that F(X is a submaximal space (resp., door space for some covariant functor Ff rom the category Top to itself. T0, and FH functors are completely studied. Secondly, our interest is directed towards the characterization of maps f given by a flow (X, f in the category Set, such that (X,P(f is submaximal (resp., door where P(f is a topology on X whose closed sets are exactly the f-invariant sets.

Unified Photo Enhancement by Discovering Aesthetic Communities From Flickr.

Science.gov (United States)

Hong, Richang; Zhang, Luming; Tao, Dacheng

2016-03-01

Photo enhancement refers to the process of increasing the aesthetic appeal of a photo, such as changing the photo aspect ratio and spatial recomposition. It is a widely used technique in the printing industry, graphic design, and cinematography. In this paper, we propose a unified and socially aware photo enhancement framework which can leverage the experience of photographers with various aesthetic topics (e.g., portrait and landscape). We focus on photos from the image hosting site Flickr, which has 87 million users and to which more than 3.5 million photos are uploaded daily. First, a tagwise regularized topic model is proposed to describe the aesthetic topic of each Flickr user, and coherent and interpretable topics are discovered by leveraging both the visual features and tags of photos. Next, a graph is constructed to describe the similarities in aesthetic topics between the users. Noticeably, densely connected users have similar aesthetic topics, which are categorized into different communities by a dense subgraph mining algorithm. Finally, a probabilistic model is exploited to enhance the aesthetic attractiveness of a test photo by leveraging the photographic experiences of Flickr users from the corresponding communities of that photo. Paired-comparison-based user studies show that our method performs competitively on photo retargeting and recomposition. Moreover, our approach accurately detects aesthetic communities in a photo set crawled from nearly 100000 Flickr users.

16 CFR 1211.13 - Inherent force activated secondary door sensors.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Inherent force activated secondary door sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... across the door so that the axis is perpendicular to the plane of the door. See Figure 6 of this part...

Three-photon excited PL spectroscopy and photo-generated Frenkel defects in wide-bandgap layered CdI2 semiconductors

International Nuclear Information System (INIS)

Miah, M. Idrish

2009-01-01

We performed a three-photon excitation nonlinear photoluminescence (PL) spectroscopy in single crystals of wide-bandgap semiconductors (WBSs). The crystal temperature (T L )-dependent PL emission intensity (I PL ) excited with different excitation power density (P) was measured. The PL emissions showed characteristics I PL with their maxima at around 520 nm. The I PL might be due to the presence of the photo-generated Frenkel defects (FDs) in WBSs. A detailed analysis of the PL spectra showed a third-order power law dependence of the maximum I PL on P for all the crystal temperature T L . The I PL was found to increase with decreasing T L . The results demonstrated the existence of the self-trapped excitons resulting from the presence of the FDs in the crystals.

Ultra-wide frequency response measurement of an optical system with a DC photo-detector

KAUST Repository

Kuntz, Katanya B.; Wheatley, Trevor A.; Song, Hongbin; Webb, James G.; Mabrok, Mohamed; Huntington, Elanor H.; Yonezawa, Hidehiro

2017-01-01

Precise knowledge of an optical device's frequency response is crucial for it to be useful in most applications. Traditional methods for determining the frequency response of an optical system (e.g. optical cavity or waveguide modulator) usually rely on calibrated broadband photo-detectors or complicated RF mixdown operations. As the bandwidths of these devices continue to increase, there is a growing need for a characterization method that does not have bandwidth limitations, or require a previously calibrated device. We demonstrate a new calibration technique on an optical system (consisting of an optical cavity and a high-speed waveguide modulator) that is free from limitations imposed by detector bandwidth, and does not require a calibrated photo-detector or modulator. We use a low-frequency (DC) photo-detector to monitor the cavity's optical response as a function of modulation frequency, which is also used to determine the modulator's frequency response. Knowledge of the frequency-dependent modulation depth allows us to more precisely determine the cavity's characteristics (free spectral range and linewidth). The precision and repeatability of our technique is demonstrated by measuring the different resonant frequencies of orthogonal polarization cavity modes caused by the presence of a non-linear crystal. Once the modulator has been characterized using this simple method, the frequency response of any passive optical element can be determined to a fine resolution (e.g. kilohertz) over several gigahertz.

The chatter door, designing for in-between spaces

NARCIS (Netherlands)

Duel, T.; Levy, P.

2015-01-01

The project presented in this paper is part of a broader research addressing in-between spaces and the designing of experiences taking place there. The project focuses on door frames, and inquires the way to improve social interactions taking place 'at the door'. To do so, the approach is structured

From acoustic descriptors to evoked quality of car door sounds.

Science.gov (United States)

Bezat, Marie-Céline; Kronland-Martinet, Richard; Roussarie, Vincent; Ystad, Sølvi

2014-07-01

This article describes the first part of a study aiming at adapting the mechanical car door construction to the drivers' expectancies in terms of perceived quality of cars deduced from car door sounds. A perceptual cartography of car door sounds is obtained from various listening tests aiming at revealing both ecological and analytical properties linked to evoked car quality. In the first test naive listeners performed absolute evaluations of five ecological properties (i.e., solidity, quality, weight, closure energy, and success of closure). Then experts in the area of automobile doors categorized the sounds according to organic constituents (lock, joints, door panel), in particular whether or not the lock mechanism could be perceived. Further, a sensory panel of naive listeners identified sensory descriptors such as classical descriptors or onomatopoeia that characterize the sounds, hereby providing an analytic description of the sounds. Finally, acoustic descriptors were calculated after decomposition of the signal into a lock and a closure component by the Empirical Mode Decomposition (EMD) method. A statistical relationship between the acoustic descriptors and the perceptual evaluations of the car door sounds could then be obtained through linear regression analysis.

ECR Plasma Photos

International Nuclear Information System (INIS)

Racz, R.; Biri, S.; Palinkas, J.

2009-01-01

Complete text of publication follows. In order to observe and study systematically the plasma of electron cyclotron resonance (ECR) ion sources (ECRIS) we made a high number of high-resolution visible light plasma photos and movies in the ATOMKI ECRIS Laboratory. This required building the ECR ion source into an open plasma device, temporarily. An 8MP digital camera was used to record photos of plasmas made from He, methane, N, O, Ne, Ar, Kr, Xe gases and from their mixtures. The effects of the main external setting parameters (gas pressure, gas composition, magnetic field, microwave power, microwave frequency) were studied to the shape, color and structure of the plasma. The double frequency mode (9+14 GHz) was also realized and photos of this special 'star-in-star' shape plasma were recorded. A study was performed to analyze and understand the color of the ECR plasmas. The analysis of the photo series gave us many qualitative and numerous valuable physical information on the nature of ECR plasmas. To our best knowledge our work is the first systematic study of ECR plasmas in the visible light region. When looking in the plasma chamber of an ECRIS we can see an axial image of the plasma (figure 1) in conformity with experimental setup. Most of the quantitative information was obtained through the summarised values of the Analogue Digital Unit (ADU) of pixels. By decreasing the strength of the magnetic trap we clearly observed that the brightness of the central part of the plasma gradually decreases, i.e. the plasma becomes more and more 'empty'. Figure 2 shows a photo series of ECR plasma at decreasing axial magnetic field. The radial size of the plasma increased because of the ascendant resonant zone. By increasing the power of the injected microwave an optimum (or at least saturation) was found in the brightness of the plasma. We found correlation between the gas dosing rates and plasma intensities. When sweeping the frequency of the microwave in a wide region

Understanding "revolving door" patients in general practice: a qualitative study.

Science.gov (United States)

Williamson, Andrea E; Mullen, Kenneth; Wilson, Philip

2014-02-13

'Revolving door' patients in general practice are repeatedly removed from general practitioners' (GP) lists. This paper reports a qualitative portion of the first mixed methods study of these marginalised patients. We conducted qualitative semi-structured interviews with six practitioner services staff and six GPs in Scotland, utilizing Charmazian grounded theory to characterise 'revolving door' patients and their impact from professionals' perspectives. 'Revolving door' patients were reported as having three necessary characteristics; they had unreasonable expectations, exhibited inappropriate behaviours and had unmet health needs. A range of boundary breaches were reported too when 'revolving door' patients interacted with NHS staff. We utilise the 'sensitising concepts' of legitimacy by drawing on literature about 'good and bad' patients and 'dirty work designations.' We relate these to the core work of general practice and explore the role that medical and moral schemas have in how health service professionals understand and work with 'revolving door' patients. We suggest this may have wider relevance for the problem doctor patient relationship literature.

Door locking and exit security measures on acute psychiatric admission wards

NARCIS (Netherlands)

Nijman, H.L.I.; Bowers, L.; Haglund, K.; Muir-Cochrane, E.; Simpson, A.; Merwe, M. van der

2011-01-01

Locking the exit doors of psychiatric wards is believed to reduce the risk of patients absconding. The aims of the study were to investigate both the prevalence of door locking and other exit security measures on UK admission wards, as well as whether door locking appears to be effective in keeping

Ultra-wide frequency response measurement of an optical system with a DC photo-detector

KAUST Repository

Kuntz, Katanya B.

2017-01-09

Precise knowledge of an optical device\\'s frequency response is crucial for it to be useful in most applications. Traditional methods for determining the frequency response of an optical system (e.g. optical cavity or waveguide modulator) usually rely on calibrated broadband photo-detectors or complicated RF mixdown operations. As the bandwidths of these devices continue to increase, there is a growing need for a characterization method that does not have bandwidth limitations, or require a previously calibrated device. We demonstrate a new calibration technique on an optical system (consisting of an optical cavity and a high-speed waveguide modulator) that is free from limitations imposed by detector bandwidth, and does not require a calibrated photo-detector or modulator. We use a low-frequency (DC) photo-detector to monitor the cavity\\'s optical response as a function of modulation frequency, which is also used to determine the modulator\\'s frequency response. Knowledge of the frequency-dependent modulation depth allows us to more precisely determine the cavity\\'s characteristics (free spectral range and linewidth). The precision and repeatability of our technique is demonstrated by measuring the different resonant frequencies of orthogonal polarization cavity modes caused by the presence of a non-linear crystal. Once the modulator has been characterized using this simple method, the frequency response of any passive optical element can be determined to a fine resolution (e.g. kilohertz) over several gigahertz.

Applications of the Discrete ordinates of Oak ridge System (DOORS) package to Nuclear Engineering problems

Energy Technology Data Exchange (ETDEWEB)

Azmy, Y.Y. [The Pennsylvania State University, 229 Reber Building, University Park, PA 16802 (United States)]. e-mail: yya3@psu.edu

2004-07-01

Particle transport problems are notorious for their difficulty. This fact requires that production level computer codes designed to address realistic engineering problems possess three important features: (i) high computational efficiency as measured by solution accuracy for a fixed computational cost; (ii) a wide variety of options to enhance robustness of the transport solver; and (iii) a broad collection of support codes that extend the reach of the transport solver to a wide variety of applications. The Discrete Ordinates of Oak Ridge System (DOORS) code package was designed with these features in mind. In this paper, capabilities of member codes in the DOORS package are overviewed with particular emphasis on two newly developed peripheral codes: BOT3P the mesh-generation and visualization code package, and GipGui the graphical user interface for the cross section manipulation code, GIP. Two large applications are used to illustrate the tight coupling between the peripheral codes and the DORT and TORT transport solvers in two and three dimensional geometries, respectively. These are: (i) criticality calculations for the C5G7MOX core benchmark; and (ii) dose distribution calculations for the Target Service Cell (TSC) of the Spallation Neutron Source (SNS). (Author)

Applications of the Discrete ordinates of Oak ridge System (DOORS) package to Nuclear Engineering problems

International Nuclear Information System (INIS)

Azmy, Y.Y.

2004-01-01

Particle transport problems are notorious for their difficulty. This fact requires that production level computer codes designed to address realistic engineering problems possess three important features: (i) high computational efficiency as measured by solution accuracy for a fixed computational cost; (ii) a wide variety of options to enhance robustness of the transport solver; and (iii) a broad collection of support codes that extend the reach of the transport solver to a wide variety of applications. The Discrete Ordinates of Oak Ridge System (DOORS) code package was designed with these features in mind. In this paper, capabilities of member codes in the DOORS package are overviewed with particular emphasis on two newly developed peripheral codes: BOT3P the mesh-generation and visualization code package, and GipGui the graphical user interface for the cross section manipulation code, GIP. Two large applications are used to illustrate the tight coupling between the peripheral codes and the DORT and TORT transport solvers in two and three dimensional geometries, respectively. These are: (i) criticality calculations for the C5G7MOX core benchmark; and (ii) dose distribution calculations for the Target Service Cell (TSC) of the Spallation Neutron Source (SNS). (Author)

Effects of Door Width and Human Body Size on Walking Speed

Directory of Open Access Journals (Sweden)

Jetthumrong Siwalee

2016-01-01

Full Text Available Door width is one of the important factors to concern in layout or facilities design because it affects directly to traffic speed and overall traffic time simultaneously. Nowadays, common assessment method is computer simulation which is still not realistic due to the unchanged speed of model while walking through a door. This research aims to study an effect of door width to individual walking speed. Sixty subjects participated in the experiment and performed task by walking through the door that is set the width as 40, 50, 60, 70, 80, 90 and 100 centimetres. The optical motion capture system was used to determine walking speed. The results showed that Fitts’ law was applied to the participants with high weight. Door width below 70 centimetres significantly affected to changing speed at 0-0.5 m. before the door. Additionally, human size also affected changing speed. The factors include shoulder breadth, weight and interaction between shoulder breadth and weight were found to be significant. These factors explained 54.2% of changing speed.

Influence of radiation on photo-electric characteristics of silicon photo cells with optical coverings

International Nuclear Information System (INIS)

Madatov, R.S.; Safarov, N.A.; Gasymova, V.G.; Abdurragimov, A.A.; Allahverdiev, A.M.

2003-01-01

In the given work results of measurements volt-ampere and spectral characteristics of silicon photo cells with optical coverings ZnS+Nd 2 O 3 irradiated accelerated electrons with energy 4.5 MeV are carried out. Elements have been made by diffusion of phosphorus in p-silicon with specific resistance 2 Ω·cm. Under condition of illumination from source AMI the photocurrent of short circuit made 40 mA/cm 2 , and a photo voltage of idling 0.52 V, efficiency made 15 %. To receive low reflection in wide area of spectral sensitivity and by that as much as possible to increase efficiency of elements with the help of two-layer coverings. The irradiation of samples was made on linear accelerator EL4-6 at room temperature. It is received, that with increase in a dose of an irradiation the Photocurrent and photo voltage decreases, and speed reduction of a photo-current is stronger, than photo voltage. The critical integrated stream for these elements makes 4·10 12 el/cm 2 . In all researched samples radiating reduction of a voltage of idling in an interval of 10 10 -10 14 el/cm 2 makes 8-10 %. The analysis of spectral characteristics of the irradiated samples show, that reduction of a photocurrent in long-wave areas of a spectrum is connected by creation of radiating defects in a base part of an element. The increase in a critical stream in silicon solar elements with optical a covering in comparison with elements without a covering is connected with low concentration of defects in the base, created with electron. Thus, on the basis of complex research of influence on radiating stability silicon solar elements us it is established, that two-layer coverings not only increases efficiency of photo cells, but also considerably raise value of an integrated stream electrons, that is equivalent to increase in service life of the elements working in conditions of radiation

Usage of radiography techniques for restoration of Cizre Mardin Ulucami door

International Nuclear Information System (INIS)

Tugrul, B.; Sungur, F.; Gorkem, A.; Olcer, N.

1986-01-01

In this study, one of the two sections of Cizre-Mardin Ulucami door is investigated by x-ray radiography technique whether it has some patterns similar to those which were discovered during the restoration of the first section of the door. Some painted and traced parts have been fixed and torn down, cleared and investigated. In the study, many pieces of the first part of the door including the second door have been investigated by x-ray radiography technique and have been evaluated. Furthermore, neutrography has been applied on some painted parts for the investigation of traces of painting. (author)

Metabolomics - A wide-open door to personalized treatment in chronic heart failure?

Science.gov (United States)

Marcinkiewicz-Siemion, M; Ciborowski, M; Kretowski, A; Musial, W J; Kaminski, K A

2016-09-15

Heart failure (HF) is a complex syndrome representing a final stage of various cardiovascular diseases. Despite significant improvement in the diagnosis and treatment (e.g. ACE-inhibitors, β-blockers, aldosterone antagonists, cardiac resynchronization therapy) of the disease, prognosis of optimally treated patients remains very serious and HF mortality is still unacceptably high. Therefore there is a strong need for further exploration of novel analytical methods, predictive and prognostic biomarkers and more personalized treatment. The metabolism of the failing heart being significantly impaired from its baseline state may be a future target not only for biomarker discovery but also for the pharmacologic intervention. However, an assessment of a particular, isolated metabolite or protein cannot be fully informative and makes a correct interpretation difficult. On the other hand, metabolites profile analysis may greatly assist investigator in an interpretation of the altered pathway dynamics, especially when combined with other lines of evidence (e.g. metabolites from the same pathway, transcriptomics, proteomics). Despite many prior studies on metabolism, the knowledge of peripheral and cardiac pathophysiological mechanisms responsible for the metabolic imbalance and progression of the disease is still insufficient. Metabolomics enabling comprehensive characterization of low molecular weight metabolites (e.g. lipids, sugars, organic acids, amino acids) that reflects the complete metabolic phenotype seems to be the key for further potential improvement in HF treatment (diet-based or biochemical-based). Will this -omics technique one day open a door to easy patients identification before they have a heart failure onset or its decompensation? Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Upgrading inflatable door seals

International Nuclear Information System (INIS)

Sykes, T.M.; Metcalfe, R.; Welch, L.A.; Josefowich, J.M.

1997-01-01

Inflatable door seals are used for airlocks in CANDU stations. They have been a significant source of unreliability and maintenance cost. A program is underway to improve their performance and reliability, backed by environmental qualification testing. Only commercial products and suppliers existed in 1993. For historical reasons, these 'existing products' did not use the most durable material then available. In hindsight, neither had they been adapted nor optimized to combat conditions often experienced in the plants-sagging doors, damaged sealing surfaces, and many thousands of openings and closings per year. Initial attempts to involve the two existing suppliers in efforts to upgrade these seals were unsuccessful. Another suitable supplier had therefore to be found, and a 'new,' COG-owned seal developed; this was completed in 1997. This paper summarizes its testing, along with that of the two existing products. Resistance to aging has been improved significantly. Testing has shown that an accident can be safely withstood after 10 years of service or 40,000 openings-closings, whichever comes first. AECL's Fluid Sealing Technology Unit (FSTU) has invested in the special moulds, test fixtures and other necessary tooling and documentation required to begin commercial manufacture of this new quality product. Accordingly, as with FSTU's other nuclear products such as pump seals, the long-term supply of door seals to CANDU plants is now protected from many external uncertainties-e.g., commercial products being discontinued, materials being changed, companies going out of business. Manufacturing to AECL's detailed specifications is being subcontracted to the new supplier. FSTU is performing the quality surveillance, inspection, testing, and customer service activities concomitant with direct responsibility for supply to the plants. (author)

Door valve for fuel handling path

International Nuclear Information System (INIS)

Makishima, Katsuhiko.

1969-01-01

A door valve is provided which seals cover gas from a liquid metal cooled reactor without leakage therefrom. A threaded shaft is screwed into a heavy box press which is packed with lead. The shaft is adapted to be rotated by an electric motor or a manually operated wheel which is disposed outside of the door valve. A valve plate is suspended from the box press by four guide wheels mounted thereon. The guide wheels are fitted into inclined guide grooves formed at the valve plate and into grooved formed in the inner wall of a valve casing. A locking ball is provided at each side of the valve plate. In operation the shaft rotates and travels to permit the box press and the valve plate to move into the door valve casing, thus releasing the locking balls. The valve plate does not contact the bottom of the casing. When the box press reaches the home position, the valve plate is carried on the valve opening, and the box press presses the valve plate to increase the tightness. The valve plate does not suffer wear as it does not slide over other parts. (Yamaguchi, T.)

[When doors slam, fingers jam!].

Science.gov (United States)

Claudet, I; Toubal, K; Carnet, C; Rekhroukh, H; Zelmat, B; Debuisson, C; Cahuzac, J-P

2007-08-01

Epidemiological analysis in a universitary paediatric emergency unit of children admitted after accidental injuries resulting from fingers crushed in a door. Prospective, descriptive cohort study from September 6th, 2004 to July 1st, 2005 included all children admitted for finger injuries crushed in a non-automatic door. included accidents due to automatic doors, toy's or refrigerator doors, families who refused to participate to the study or families who had left the waiting area before medical examination. Collected data were patient and family characteristics, accident characteristics and its management. Three hundred and forty children affected by 427 digital lesions were included. The mean age was 5.5+/-3.8 years (range 4 months - 15.5 years). Male/female ratio was equal to 1.2: 1. Fifty-eight percent of patients belonged to families composed of 3 or more siblings. Ninety-three per cent of families came to hospital within the first 2 hours after the accident (mean delay 99+/-162 min, median range 54 minutes). Location of the accident was: domestic (62%, at home (64%)), at school (17%). Locations within the home were: the bedroom (33%), bathroom and toilets (21%). An adult was present in 75% of cases and responsible for the trauma in 25% of accidents, another child in 44%. The finger or fingers were trapped on the hinge side in 57% of patients. No specific safeguard devices were used by 94% of families. Among victims, 20% had several crushed digits; left and right hand were injured with an equal frequency. The commonest involved digits were: the middle finger (29%), the ring finger (23%). The nail plate was damaged in 60% of digital lesions, associated with a wound (50%), a distal phalanx fracture (P3) (12%). Six children had a partial or complete amputation of P3, 2 children a lesion of the extensor tendon, 1 child had a rupture of the external lateral ligament. Three percent of children required an admission to the paediatric orthopaedic surgery unit. Post

Photos

Science.gov (United States)

GPS U.S. Air Force Academy Warrior Care Warrior Games Women's History Month Tag: Search Tag Sort By Squadron Ruck March Download Full Image Photo Details F-22 Demonstration Download Full Image Photo Details

The Vaccination of 35,000 Dogs in 20 Working Days Using Combined Static Point and Door-to-Door Methods in Blantyre, Malawi.

Directory of Open Access Journals (Sweden)

Andrew D Gibson

2016-07-01

Full Text Available An estimated 60,000 people die of rabies annually. The vast majority of cases of human rabies develop following a bite from an infected dog. Rabies can be controlled in both human and canine populations through widespread vaccination of dogs. Rabies is particularly problematic in Malawi, costing the country an estimated 13 million USD and 484 human deaths annually, with an increasing paediatric incidence in Blantyre City. Consequently, the aim of this study was to vaccinate a minimum of 75% of all the dogs within Blantyre city during a one month period. Blantyre's 25 administrative wards were divided into 204 working zones. For initial planning, a mean human:dog ratio from the literature enabled estimation of dog population size and dog surveys were then performed in 29 working zones in order to assess dog distribution by land type. Vaccination was conducted at static point stations at weekends, at a total of 44 sites, with each operating for an average of 1.3 days. On Monday to Wednesday, door-to-door vaccination sessions were undertaken in the areas surrounding the preceding static point stations. 23,442 dogs were vaccinated at static point stations and 11,774 dogs were vaccinated during door-to-door vaccinations. At the end of the 20 day vaccination programme, an assessment of vaccination coverage through door-to-door surveys found that of 10,919 dogs observed, 8,661 were vaccinated resulting in a vaccination coverage of 79.3% (95%CI 78.6-80.1%. The estimated human:dog ratio for Blantyre city was 18.1:1. Mobile technology facilitated the collection of data as well as efficient direction and coordination of vaccination teams in near real time. This study demonstrates the feasibility of vaccinating large numbers of dogs at a high vaccination coverage, over a short time period in a large African city.

The Vaccination of 35,000 Dogs in 20 Working Days Using Combined Static Point and Door-to-Door Methods in Blantyre, Malawi.

Science.gov (United States)

Gibson, Andrew D; Handel, Ian G; Shervell, Kate; Roux, Tarryn; Mayer, Dagmar; Muyila, Stanford; Maruwo, Golden B; Nkhulungo, Edwin M S; Foster, Rachel A; Chikungwa, Patrick; Chimera, Bernard; Bronsvoort, Barend M deC; Mellanby, Richard J; Gamble, Luke

2016-07-01

An estimated 60,000 people die of rabies annually. The vast majority of cases of human rabies develop following a bite from an infected dog. Rabies can be controlled in both human and canine populations through widespread vaccination of dogs. Rabies is particularly problematic in Malawi, costing the country an estimated 13 million USD and 484 human deaths annually, with an increasing paediatric incidence in Blantyre City. Consequently, the aim of this study was to vaccinate a minimum of 75% of all the dogs within Blantyre city during a one month period. Blantyre's 25 administrative wards were divided into 204 working zones. For initial planning, a mean human:dog ratio from the literature enabled estimation of dog population size and dog surveys were then performed in 29 working zones in order to assess dog distribution by land type. Vaccination was conducted at static point stations at weekends, at a total of 44 sites, with each operating for an average of 1.3 days. On Monday to Wednesday, door-to-door vaccination sessions were undertaken in the areas surrounding the preceding static point stations. 23,442 dogs were vaccinated at static point stations and 11,774 dogs were vaccinated during door-to-door vaccinations. At the end of the 20 day vaccination programme, an assessment of vaccination coverage through door-to-door surveys found that of 10,919 dogs observed, 8,661 were vaccinated resulting in a vaccination coverage of 79.3% (95%CI 78.6-80.1%). The estimated human:dog ratio for Blantyre city was 18.1:1. Mobile technology facilitated the collection of data as well as efficient direction and coordination of vaccination teams in near real time. This study demonstrates the feasibility of vaccinating large numbers of dogs at a high vaccination coverage, over a short time period in a large African city.

Three-photon excited PL spectroscopy and photo-generated Frenkel defects in wide-bandgap layered CdI{sub 2} semiconductors

Energy Technology Data Exchange (ETDEWEB)

Miah, M. Idrish, E-mail: m.miah@griffith.edu.a [Qeensland Micro- and Nanotechnology Centre, Griffith University, Nathan, Brisbane, QLD 4111 (Australia)] [School of Biomolecular and Physical Sciences, Griffith University, Nathan, Brisbane, QLD 4111 (Australia)] [Department of Physics, University of Chittagong, Chittagong-4331 (Bangladesh)

2009-12-14

We performed a three-photon excitation nonlinear photoluminescence (PL) spectroscopy in single crystals of wide-bandgap semiconductors (WBSs). The crystal temperature (T{sub L})-dependent PL emission intensity (I{sub PL}) excited with different excitation power density (P) was measured. The PL emissions showed characteristics I{sub PL} with their maxima at around 520 nm. The I{sub PL} might be due to the presence of the photo-generated Frenkel defects (FDs) in WBSs. A detailed analysis of the PL spectra showed a third-order power law dependence of the maximum I{sub PL} on P for all the crystal temperature T{sub L}. The I{sub PL} was found to increase with decreasing T{sub L}. The results demonstrated the existence of the self-trapped excitons resulting from the presence of the FDs in the crystals.

Beoordeling RWA-installatie Atrium Vertigo: Rookverspreiding door het gebouw

NARCIS (Netherlands)

Neuhaus, E.

2004-01-01

Het atrium van het Vertigo-gebouw is bouwkundig bedoeld als één groot brandcompartiment. De schuifdeuren en ramen naar aanliggende vertrekken staan echter vaak open. Hierdoor kan de rook zich in het geval van een brand in het atrium gemakkelijk door het gebouw verspreiden door een overdruk in het

Science photo library

CERN Document Server

1999-01-01

SPL [Science Photo Library] holds a wide range of pictures on all aspects of science, medicine and technology. The pictures come with detailed captions and are available as high quality transparencies in medium or 35mm format. Digital files can be made available on request. Our website provides low resolution files of the pictures in this catalogue, which you can search and download for layout presentation use once you have registered. High resolution files or reproduction are available on request and can be delivered to you by disk or ISDN. Visit the online catalog: www.sciencephoto.com

CERN Photo club

CERN Multimedia

CERN Photo club

2016-01-01

The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

Landing Gear Door Liners for Airframe Noise Reduction

Science.gov (United States)

Jones, Michael G. (Inventor); Howerton, Brian M. (Inventor); Van De Ven, Thomas (Inventor)

2014-01-01

A landing gear door for retractable landing gear of aircraft includes an acoustic liner. The acoustic liner includes one or more internal cavities or chambers having one or more openings that inhibit the generation of sound at the surface and/or absorb sound generated during operation of the aircraft. The landing gear door may include a plurality of internal chambers having different geometries to thereby absorb broadband noise.

Actively learning human gaze shifting paths for semantics-aware photo cropping.

Science.gov (United States)

Zhang, Luming; Gao, Yue; Ji, Rongrong; Xia, Yingjie; Dai, Qionghai; Li, Xuelong

2014-05-01

Photo cropping is a widely used tool in printing industry, photography, and cinematography. Conventional cropping models suffer from the following three challenges. First, the deemphasized role of semantic contents that are many times more important than low-level features in photo aesthetics. Second, the absence of a sequential ordering in the existing models. In contrast, humans look at semantically important regions sequentially when viewing a photo. Third, the difficulty of leveraging inputs from multiple users. Experience from multiple users is particularly critical in cropping as photo assessment is quite a subjective task. To address these challenges, this paper proposes semantics-aware photo cropping, which crops a photo by simulating the process of humans sequentially perceiving semantically important regions of a photo. We first project the local features (graphlets in this paper) onto the semantic space, which is constructed based on the category information of the training photos. An efficient learning algorithm is then derived to sequentially select semantically representative graphlets of a photo, and the selecting process can be interpreted by a path, which simulates humans actively perceiving semantics in a photo. Furthermore, we learn a prior distribution of such active graphlet paths from training photos that are marked as aesthetically pleasing by multiple users. The learned priors enforce the corresponding active graphlet path of a test photo to be maximally similar to those from the training photos. Experimental results show that: 1) the active graphlet path accurately predicts human gaze shifting, and thus is more indicative for photo aesthetics than conventional saliency maps and 2) the cropped photos produced by our approach outperform its competitors in both qualitative and quantitative comparisons.

Locked doors in acute inpatient psychiatry: a literature review.

Science.gov (United States)

van der Merwe, M; Bowers, L; Jones, J; Simpson, A; Haglund, K

2009-04-01

Many acute inpatient psychiatric wards in the UK are permanently locked, although this is contrary to the current Mental Health Act Code of Practice. To conduct a literature review of empirical articles concerning locked doors in acute psychiatric inpatient wards, an extensive literature search was performed in SAGE Journals Online, EBM Reviews, British Nursing Index, CINAHL, EMBASE Psychiatry, International Bibliography of the Social Sciences, Ovid MEDLINE, PsycINFO and Google, using the search terms 'open$', 'close$', '$lock$', 'door', 'ward', 'hospital', 'psychiatr', 'mental health', 'inpatient' and 'asylum'. A total of 11 empirical papers were included in the review. Both staff and patients reported advantages (e.g. preventing illegal substances from entering the ward and preventing patients from absconding and harming themselves or others) and disadvantages (e.g. making patients feel depressed, confined and creating extra work for staff) regarding locked doors. Locked wards were associated with increased patient aggression, poorer satisfaction with treatment and more severe symptoms. The limited literature available showed the urgent need for research to determine the real effects of locked doors in inpatient psychiatry.

Maillard-reactie door model beheersbaar

NARCIS (Netherlands)

Roost, van M.

2006-01-01

Gewenste en ongewenste bruinkleuring van levensmiddelen door een Maillard-reactie is vaak lastig te beheersen. Wageningse onderzoekers ontwikkelden een simulatiemodel, waarmee producentenmeer inzicht krijgen in de Maillard-reactie, en zo ook de kleur van het eindproduct beter kunnen beheersen

Confounding adjustment through front-door blocking in longitudinal studies

Directory of Open Access Journals (Sweden)

Arvid Sjölander

2013-03-01

Full Text Available A common aim of epidemiological research is to estimate the causal effect of a particular exposure on a particular outcome. Towards this end, observed associations are often ‘adjusted’ for potential confounding variables. When the potential confounders are unmeasured, explicit adjustment becomes unfeasible. It has been demonstrated that causal effects can be estimated even in the presence of umeasured confounding, utilizing a method called ‘front-door blocking’. In this paper we generalize this method to longitudinal studies. We demonstrate that the method of front-door blocking poses a number of challenging statistical problems, analogous to the famous problems associ- ated with the method of ‘back-door blocking’.

Photo-Detection on Narrow-Bandgap High-Mobility 2D Semiconductors

Science.gov (United States)

Charnas, Adam; Qiu, Gang; Deng, Yexin; Wang, Yixiu; Du, Yuchen; Yang, Lingming; Wu, Wenzhuo; Ye, Peide

Photo-detection and energy harvesting device concepts have been demonstrated widely in 2D materials such as graphene, TMDs, and black phosphorus. In this work, we demonstrate anisotropic photo-detection achieved using devices fabricated from hydrothermally grown narrow-bandgap high-mobility 2D semiconductor. Back-gated FETs were fabricated by transferring the 2D flakes onto a Si/SiO2 substrate and depositing various metal contacts across the flakes to optimize the access resistance for optoelectronic devices. Photo-responsivity was measured and mapped by slightly biasing the devices and shining a laser spot at different locations of the device to observe and map the resulting photo-generated current. Optimization of the Schottky barrier height for both n and p at the metal-2D interfaces using asymmetric contact engineering was performed to improve device performance.

[Psychiatry with open doors. Part 1: Rational for an open door for acute psychiatry].

Science.gov (United States)

Sollberger, D; Lang, U E

2014-03-01

Despite the reform efforts of the last decades modern acute psychiatry still stands between conflicting priorities in everyday practice. The protection of patient autonomy might conflict with a regulatory mandate of psychiatry in societal contexts and the necessity of coercive measures and involuntary treatment might become problematic with respect to presumed but contentious interests of the patient. The conflicts particularly concern questions of involuntary commitment, door closing, coercive and isolation measures. Research on the topic of therapeutic effectiveness of these practices is rare. Accordingly, the practice depends on the federal state, hospital and ward and is very heterogeneous. Epidemiological prognosis predicts an increase of psychiatric disorders; however, simultaneously in terms of medical ethics the warranty of patient autonomy, shared decision-making and informed consent in psychiatry become increasingly more important. This challenges structural and practical changes in psychiatry, particularly in situations of self and third party endangerment which are outlined and a rationale for an opening of the doors in acute psychiatric wards is provided.

Analysis of the quality of the whole journey (door-to-door) passenger expierence

Energy Technology Data Exchange (ETDEWEB)

Herrero Tomas, M.D.; Gonzalez Viosca, E.

2016-07-01

European cities increasingly face problems caused by transport and traffic. A key factor for all transport operators is the quality of the passenger experience as this particularly, affects the uptake of the service. A comprehensive study (METPEX FP7 EU project - www.metpex.eu) developed by a consortium of 16 European partners has analysed the quality of the whole journey (door-to-door) passenger experience, including private or individual forms transport and attending to specific need of users’ groups. For this purpose, a tool with a technological basis was used to collect data from 8 trial cities: Bucharest (Romania), Coventry (United Kingdom), Dublin (Ireland), Grevena (Greece), Rome (Italy), Stockholm (Sweden), Valencia (Spain) and Vilnius (Lithuania); and five FIA motorist networks countries. For a correct evaluation of quality experience, it was deployed a subset of key variables derived from the comprehensive set of potential satisfaction factors that were studied for each pilot city. In this paper, results of the travel experience are showed, including analysis of variables affecting behavior and feelings of passengers. (Author)

Identification of persons entering through the door from the accelerometers data

OpenAIRE

Vodopivec, Tadej

2013-01-01

This thesis presents a system for automatic identification of a person who walks through a door based on the information gathered with acceleration sensors, which are mounted on the door. The proccedure for automatic identification consists of four steps. In the first step, data acquisition and coordinate system rotation is performed. Coordinate system rotation is needed in order to match the direction of measured accelerations with the direction of components of the forces acting on the door...

Rotational and frictional dynamics of the slamming of a door

Science.gov (United States)

Klein, Pascal; Müller, Andreas; Gröber, Sebastian; Molz, Alexander; Kuhn, Jochen

2017-01-01

A theoretical and experimental investigation of the rotational dynamics, including friction, of a slamming door is presented. Based on existing work regarding different damping models for rotational and oscillatory motions, we examine different forms for the (angular) velocity dependence (ωn, n = 0, 1, 2) of the frictional force. An analytic solution is given when all three friction terms are present and several solutions for specific cases known from the literature are reproduced. The motion of a door is investigated experimentally using a smartphone, and the data are compared with the theoretical results. A laboratory experiment under more controlled conditions is conducted to gain a deeper understanding of the movement of a slammed door. Our findings provide quantitative evidence that damping models involving quadratic air drag are most appropriate for the slamming of a door. Examining this everyday example of a physical phenomenon increases student motivation, because they can relate it to their own personal experience.

Koperemissies door drinkwaterleidingen (herziene editie)

NARCIS (Netherlands)

Verweij W; Mons MN; Aalbers JEM; Cruchten RGH van; LWD

1996-01-01

Ge-inventariseerd werd wat er bekend is over de fluxen van koper door (corrosie van) waterleidingen naar rioolwaterzuiveringsinstallaties (rwzi's), rwzi-slib en het oppervlaktewater. Gebleken is dat in 1993 (landelijk gemiddeld) 57% van de koperbelasting van rwzi's afkomstig is van

Photo-lability of deep ocean dissolved black carbon

Directory of Open Access Journals (Sweden)

A. Stubbins

2012-05-01

Full Text Available Dissolved black carbon (DBC, defined here as condensed aromatics isolated from seawater via PPL solid phase extraction and quantified as benzenepolycarboxylic acid (BPCA oxidation products, is a significant component of the oceanic dissolved organic carbon (DOC pool. These condensed aromatics are widely distributed in the open ocean and appear to be tens of thousands of years old. As such DBC is regarded as highly refractory. In the current study, the photo-lability of DBC, DOC and coloured dissolved organic matter (CDOM; ultraviolet-visible absorbance were determined over the course of a 28 day irradiation of North Atlantic Deep Water under a solar simulator. During the irradiation DBC fell from 1044 ± 164 nM-C to 55 ± 15 nM-C, a 20-fold decrease in concentration. Dissolved black carbon photo-degradation was more rapid and more extensive than for bulk CDOM and DOC. The concentration of DBC correlated with CDOM absorbance and the quality of DBC indicated by the ratios of different BPCAs correlated with CDOM absorbance spectral slope, suggesting the optical properties of CDOM may provide a proxy for both DBC concentrations and quality in natural waters. Further, the photo-lability of components of the DBC pool increased with their degree of aromatic condensation. These trends indicate that a continuum of compounds of varying photo-lability exists within the marine DOC pool. In this continuum, photo-lability scales with aromatic character, specifically the degree of condensation. Scaling the rapid photo-degradation of DBC to rates of DOC photo-mineralisation for the global ocean leads to an estimated photo-chemical half-life for oceanic DBC of less than 800 years. This is more than an order of magnitude shorter than the apparent age of DBC in the ocean. Consequently, photo-degradation is posited as the primary sink for oceanic DBC and the apparent survival of DBC molecules in the oceans for millennia appears to be facilitated not by their

Degradation alternatives for a commercial fungicide in water: biological, photo-Fenton, and coupled biological photo-Fenton processes.

Science.gov (United States)

López-Loveira, Elsa; Ariganello, Federico; Medina, María Sara; Centrón, Daniela; Candal, Roberto; Curutchet, Gustavo

2017-11-01

Imazalil (IMZ) is a widely used fungicide for the post-harvest treatment of citrus, classified as "likely to be carcinogenic in humans" for EPA, that can be only partially removed by conventional biological treatment. Consequently, specific or combined processes should be applied to prevent its release to the environment. Biological treatment with adapted microorganism consortium, photo-Fenton, and coupled biological photo-Fenton processes were tested as alternatives for the purification of water containing high concentration of the fungicide and the coadjutants present in the commercial formulation. IMZ-resistant consortium with the capacity to degrade IMZ in the presence of a C-rich co-substrate was isolated from sludge coming from a fruit packaging company wastewater treatment plant. This consortium was adapted to resist and degrade the organics present in photo-Fenton-oxidized IMZ water solution. Bacteria colonies from the consortia were isolated and identified. The effect of H 2 O 2 initial concentration and dosage on IMZ degradation rate, average oxidation state (AOS), organic acid concentration, oxidation, and mineralization percentage after photo-Fenton process was determined. The application of biological treatment to the oxidized solutions notably decreased the total organic carbon (TOC) in solution. The effect of the oxidation degree, limited by H 2 O 2 concentration and dosage, on the percentage of mineralization obtained after the biological treatment was determined and explained in terms of changes in AOS. The concentration of H 2 O 2 necessary to eliminate IMZ by photo-Fenton and to reduce TOC and chemical oxygen demand (COD) by biological treatment, in order to allow the release of the effluents to rivers with different flows, was estimated.

Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing

Science.gov (United States)

Chen, Zhi-Jun; Gao, Feng; Pan, Yang

2017-09-01

Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.

Semantic photo books: leveraging blogs and social media for photo book creation

Science.gov (United States)

Rabbath, Mohamad; Sandhaus, Philipp; Boll, Susanne

2011-03-01

Recently, we observed a substantial increase in the users' interest in sharing their photos online in travel blogs, social communities and photo sharing websites. An interesting aspect of these web platforms is their high level of user-media interaction and thus a high-quality source of semantic annotations: Users comment on the photos of each others, add external links to their travel blogs, tag each other in the social communities and add captions and descriptions to their photos. However, while those media assets are shared online, many users still highly appreciate the representation of these media in appealing physical photo books where the semantics are represented in form of descriptive text, maps, and external elements in addition to their related photos. Thus, in this paper we aim at fulfilling this need and provide an approach for creating photo books from Web 2.0 resources. We concentrate on two kinds of online shared media as resources for printable photo books: (a) Blogs especially travel blogs (b) Social community websites like Facebook which witness a rapidly growing number of shared media elements including photos. We introduce an approach to select media elements including photos, geographical maps and texts from both blogs and social networks semi-automatically, and then use these elements to create a printable photo book with an appealing layout. Because the selected media elements can be too many for the resulting book, we choose the most proper ones by exploiting content based, social based, and interactive based criteria. Additionally we add external media elements such as geographical maps, texts and externally hosted photos from linked resources. Having selected the important media, our approach uses a genetic algorithm to create an appealing layout using aesthetical rules, such as positioning the photo with the related text or map in a way that respects the golden ratio and symmetry. Distributing the media over the pages is done by

Revolving Classroom Door: Management Strategies To Eliminate the Quick Spin.

Science.gov (United States)

Rancifer, Jesse L.

This paper presents classroom management practices that can be used to avoid the "revolving classroom door." In the revolving classroom door, misbehaving students are sent to the principal, and eventually returned to the classroom with no gains in student behavior or opportunity for learning. The paper begins by discussing the meaning of classroom…

Opening Doors, Hearts and Minds

Science.gov (United States)

Foster, Andrea

2007-01-01

A panel discussion, "Opening Doors, Hearts and Minds," was hosted at the 2006 annual COEO conference. Four dedicated Torontonians shared how they interpret outdoor environmental education and environmental education in what they do and offered suggestions as to how their work might be integrated in diverse urban communities. Tafari…

Epitomize Your Photos

Directory of Open Access Journals (Sweden)

Peter Vajda

2011-01-01

Full Text Available With the rapid growth of digital photography, sharing of photos with friends and family has become very popular. When people share their photos, they usually organize them into albums according to events or places. To tell the story of some important events in one’s life, it is desirable to have an efficient summarization tool which can help people to receive a quick overview of an album containing large number of photos. In this paper, we present and analyze an approach for photo album summarization through a novel social game “Epitome” as a Facebook application. This social game can collect research data, and, at the same time, it provides a collage or a cover photo of the user’s photo album, while the user enjoys playing the game. The proof of concept of the proposed method is demonstrated through a set of experiments on several photo albums. As a benchmark comparison to this game, we perform automatic visual analysis considering several state-of-the-art features. We also evaluate the usability of the game by making use of a questionnaire on several subjects who played the “Epitome” game. Furthermore, we address privacy issues concerning shared photos in Facebook applications.

Blower door method in radon diagnostics

International Nuclear Information System (INIS)

Fronka, A.; Moucka, L.

2004-01-01

The idea of the radon transfer factor is commonly presented as the ratio of the building indoor radon concentration to the subsoil radon concentration. Ventilation and the pressure field over the whole building envelope, which varies in a time over a very wide range even in the same building, poses a major problem. Therefore a new approach based on the controlled conditions determining the soil air infiltration was developed. Radon in soil gas infiltrates into the building indoor environment particularly through cracks and other leakages in the structure providing the building contact with its subsoil. The infiltration is driven by the air pressure difference on the two sides of the structure. The pressure difference is caused by the stack effect and its value ranges from 1-2 Pa in family houses to some tens of Pa in higher buildings. Unfortunately, the pressure difference is very unstable under normal conditions, being affected by a host of parameters such as the height of the building, distribution and geometry of leakages, outdoor-indoor temperature difference, etc. Wind direction and velocity of the wind plays a major role. In our research the blower door method was applied in combination with a monitoring of the indoor radon concentration. The indoor-outdoor pressure difference and the pressure difference at the two sides of the screen shutter of the blower door fan are also measured. The blower door ensures a constant, evaluable air exchange rate. The fan power is regulated to provide a stable pressure difference within the range of roughly 5-100 Pa. This approach provides very well defined conditions allowing us to apply a constant ventilation-constant radon supply model. In such circumstances the dynamical changes of radon concentrations are very fast, and therefore a unique continual radon monitor was applied. The radon supply rate is evaluated from the radon steady state of the time course of radon concentration. The dependence of the radon supply rate on

Photo-induced travelling waves in condensed Langmuir monolayers

Energy Technology Data Exchange (ETDEWEB)

Tabe, Y [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan); Yamamoto, T [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan); Yokoyama, H [Yokoyama Nano-Structured Liquid Crystal Project, ERATO, Japan Science and Technology Corporation, 5-9-9 Tokodai, Tsukuba, Ibaraki 300-2635, Japan (Japan)

2003-06-01

We report the detailed properties of photo-induced travelling waves in liquid crystalline Langmuir monolayers composed of azobenzene derivatives. When the monolayer, in which the constituent rodlike molecules are coherently tilted from the layer normal, is weakly illuminated to undergo the trans-cis photo-isomerization, spatio-temporal periodic oscillations of the molecular azimuth begin over the entire excited area and propagate as a two-dimensional orientational wave. The wave formation takes place only when the film is formed at an asymmetric interface with broken up-down symmetry and when the chromophores are continuously excited near the long-wavelength edge of absorption to induce repeated photo-isomerizations between the trans and cis forms. Under proper illumination conditions, Langmuir monolayers composed of a wide variety of azobenzene derivatives have been confirmed to exhibit similar travelling waves with velocity proportional to the excitation power irrespective of the degree of amphiphilicity. The dynamics can be qualitatively explained by the modified reaction-diffusion model proposed by Reigada, Sagues and Mikhailov.

Using Face Recognition in the Automatic Door Access Control in a Secured Room

Directory of Open Access Journals (Sweden)

Gheorghe Gilca

2017-06-01

Full Text Available The aim of this paper is to help users improve the door security of sensitive locations by using face detection and recognition. This paper is comprised mainly of three subsystems: face detection, face recognition and automatic door access control. The door will open automatically for the known person due to the command of the microcontroller.

Medium-to-high prevalence of screening-detected parkinsonism in the urban area of Tehran, Iran: data from a community-based door-to-door study

Directory of Open Access Journals (Sweden)

Fereshtehnejad SM

2015-02-01

Full Text Available Seyed-Mohammad Fereshtehnejad,1,2 Mahdiyeh Shafieesabet,3 Arash Rahmani,4 Ahmad Delbari,1,5 Johan Lökk1,6 1Division of Clinical Geriatrics, Department of Neurobiology, Care Sciences, and Society (NVS, Karolinska Institutet, Stockholm, Sweden; 2Firoozgar Clinical Research Development Center (FCRDC, Firoozgar Hospital, 3Medical Student Research Committee (MSRC, Faculty of Medicine, 4Mental Health Research Center, Tehran Institute of Psychiatry, School of Behavioral Sciences and Mental Health, Iran University of Medical Sciences, Tehran, Iran; 5Iranian Research Center on Aging, University of Social Welfare and Rehabilitation, Tehran, Iran; 6Department of Geriatric Medicine, Karolinska University Hospital, Stockholm, Sweden Introduction: Parkinsonism occurs in all ethnic groups worldwide; however, there are wide variations in the prevalence rates reported from different countries, even for neighboring regions. The huge socioeconomic burden of parkinsonism necessitates the need for prevalence studies in each country. So far, there is neither data registry nor prevalence information on parkinsonism in the Iranian population. The aim of our study was to estimate the prevalence rate of probable parkinsonism in a huge urban area in Iran, Tehran using a community-based door-to-door survey.Materials and methods: We used a random multistage sampling of the households within the network of health centers consisting of 374 subunits in all 22 districts throughout the entire urban area of Tehran. Overall, 20,621 individuals answered the baseline checklist and screening questionnaire and data from 19,500 persons aged ≥30 years were entered in the final analysis. Health care professionals used a new six-item screening questionnaire for parkinsonism, which has been previously shown to have a high validity and diagnostic value in the same population.Results: A total of 157 cases were screened for parkinsonism using the validated six-item questionnaire. After

ATLAS HEC PHOTOS TRIUMF

CERN Multimedia

1997-01-01

Photo 1 - Removal of a glued foil from the glue press. The foils still need to be cut with a steel rule die and the HV pins soldered on. Photo 2 - Inspection of EST foil. Photo 3 - Placing the first plate of the front Module 0 on the stacking table with the tie-rods in place. Photo 4 - As each gap is stacked, it is tested by applying 3kV across each honeycomb sheet and ensuring that the current draw is low (a few tens of nA). Photo 5 - HV testing on a stacked front module. Photo 6 - Detail of a gap in a module. Four sheets of honeycomb spacing mats separate the centre PAD foil from the two EST foils on either side, and hold the EST foils away from the copper absorber structure. Photo 7 - Last plate of rear module being stacked. Photo 8 - Stacked rear module 0. Photo 9 - Four Module 0's, one front and one rear from TRIUMF, one from Germany, and one from and one from Russia, are "married" into one structure. In this picture, two front modules are married together. Photo 10 - After two modules are married, they ...

Influenza Photos

Science.gov (United States)

... Polio Whooping cough Influenza (flu) Rabies Yellow fever Influenza Photos Photographs accompanied by text that reads "Courtesy ... of these photos are quite graphic. Shows how influenza germs spread through the air when someone coughs ...

Photo-excitation of carotenoids causes cytotoxicity via singlet oxygen production

International Nuclear Information System (INIS)

Yoshii, Hiroshi; Yoshii, Yukie; Asai, Tatsuya; Furukawa, Takako; Takaichi, Shinichi; Fujibayashi, Yasuhisa

2012-01-01

Highlights: ► Some photo-excited carotenoids have photosensitizing ability. ► They are able to produce ROS. ► Photo-excited fucoxanthin can produce singlet oxygen through energy transfer. -- Abstract: Carotenoids, natural pigments widely distributed in algae and plants, have a conjugated double bond system. Their excitation energies are correlated with conjugation length. We hypothesized that carotenoids whose energy states are above the singlet excited state of oxygen (singlet oxygen) would possess photosensitizing properties. Here, we demonstrated that human skin melanoma (A375) cells are damaged through the photo-excitation of several carotenoids (neoxanthin, fucoxanthin and siphonaxanthin). In contrast, photo-excitation of carotenoids that possess energy states below that of singlet oxygen, such as β-carotene, lutein, loroxanthin and violaxanthin, did not enhance cell death. Production of reactive oxygen species (ROS) by photo-excited fucoxanthin or neoxanthin was confirmed using a reporter assay for ROS production with HeLa Hyper cells, which express a fluorescent indicator protein for intracellular ROS. Fucoxanthin and neoxanthin also showed high cellular penetration and retention. Electron spin resonance spectra using 2,2,6,6-tetramethil-4-piperidone as a singlet oxygen trapping agent demonstrated that singlet oxygen was produced via energy transfer from photo-excited fucoxanthin to oxygen molecules. These results suggest that carotenoids such as fucoxanthin, which are capable of singlet oxygen production through photo-excitation and show good penetration and retention in target cells, are useful as photosensitizers in photodynamic therapy for skin disease.

Scott Brothers Windows and Doors Information Sheet

Science.gov (United States)

Scott Brothers Windows and Doors (the Company) is located in Bridgeville, Pennsylvania. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Pittsburgh, Pennsylvania.

Gaffkemia van kreeften door Aerococcus viridans

NARCIS (Netherlands)

Engelsma, M.Y.; Haenen, O.L.M.

2011-01-01

Artikel over een bacteriële ziekte van onder andere kreeften, de zogenaamde Gaffkemia, veroorzaakt door de bacterie Aerococcus viridans. Deze ziekte is in Nederland nog niet eerder gevonden bij kreeften, maar zou met importen van kreeftachtigen mee kunnen komen.

OAS :: Photos

Science.gov (United States)

subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Photos and Symbols Authorities Social Media Facebook Twitter Newsletters Press and Communications Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

Gezondheidsschade door calamiteiten met gevaarlijke stoffen

NARCIS (Netherlands)

Weger, D. de; Feron, V.J.; Zwart, A.; Vrijer, F. de

1993-01-01

Door de Afdeling Industriële Veiligheid van IMET-TNO (Instituut voor Milieu- en Energietechnologie, Hoofdgroep Milieu en Energie te Apeldoorn) en de Afdeling Biologische Toxicologie van ITV-TNO (Instituur voor Toxicologie en voeding, Hoofdgroep Voeding te Zeist) is het project 'Gezondheidsschade

Hand sanitizer-dispensing door handles increase hand hygiene compliance: a pilot study.

Science.gov (United States)

Babiarz, Lukasz S; Savoie, Brent; McGuire, Mark; McConnell, Lauren; Nagy, Paul

2014-04-01

Improving rates of hand hygiene compliance (HHC) has been shown to reduce nosocomial disease. We compared the HHC for a traditional wall-mounted unit and a novel sanitizer-dispensing door handle device in a hospital inpatient ultrasound area. HHC increased 24.5%-77.1% (P sanitizer-dispensing door handle, whereas it remained unchanged for the other rooms. Technical improvements like a sanitizer-dispensing door handle can improve hospital HHC. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

14 CFR 25.783 - Fuselage doors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuselage doors. 25.783 Section 25.783 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... operated manually; (ii) The powered latch actuators, if installed; and (iii) The relative motion between...

Design, development and testing of a high speed door for a blast containment fixture

International Nuclear Information System (INIS)

Shapiro, C.

1991-01-01

This paper reports that the concept of a large door able to close over a three foot diameter hole in less than 50 milliseconds evolved during the design of a test containment fixture at the Idaho National Engineering laboratory (INEL). This facility was designed for use at the Aberdeen Proving Ground (APG) in Aberdeen, Maryland. EPA regulations required new technologies for blast containment at APG, which culminated in the design of the blast chamber with a high speed door at its entrance. The main requirement of the fixture is to contain large explosion pressure pulses and explosive by-products during a variety of test scenarios. The door was designed to allow entrance of test projectiles and then to close over the entrance hole to contain explosive by-products inside the fixture. The speed of the projectile and the resultant blast pressure pulse required door closure within 56 msec. Analytical modelling of the door closure indicated velocities of up to 150 ft/sec before impact, for closure within the required time. Lightweight materials were used for the moving parts to minimize this impact force, including aluminum honeycomb composite panels and energy absorbers. Actuation was accomplished with a standard explosive bolt. High pressure nitrogen accelerated the door during closure. Time measurement for the door closer were obtained using high speed video equipment

Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 2: Enablers for multimodal rail freight transport

Directory of Open Access Journals (Sweden)

Dewan Md Zahurul ISLAM

2014-12-01

Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. The part 2 of the paper is dedicated to recommend some concrete steps and actions as enablers to remove the barriers identified in the part 1 to develop multimodal rail freight transport. The enablers for multimodal rail freight transport include: •\tEuropean rail freight transport market needs full liberalisation so that incumbent and new entrants can compete freely. •\tThe rail operators need to acquire service (e.g. customer tailored services, door to door service quality offered by road freight operators. •\tThey need to conduct a combination of ‘terminal-to-terminal’ and door-to-door operations, as and when needed; •\tThey must build partnership with freight forwarder or 3PLs to include all types of customers

Indoor Modelling from Slam-Based Laser Scanner: Door Detection to Envelope Reconstruction

Science.gov (United States)

Díaz-Vilariño, L.; Verbree, E.; Zlatanova, S.; Diakité, A.

2017-09-01

Updated and detailed indoor models are being increasingly demanded for various applications such as emergency management or navigational assistance. The consolidation of new portable and mobile acquisition systems has led to a higher availability of 3D point cloud data from indoors. In this work, we explore the combined use of point clouds and trajectories from SLAM-based laser scanner to automate the reconstruction of building indoors. The methodology starts by door detection, since doors represent transitions from one indoor space to other, which constitutes an initial approach about the global configuration of the point cloud into building rooms. For this purpose, the trajectory is used to create a vertical point cloud profile in which doors are detected as local minimum of vertical distances. As point cloud and trajectory are related by time stamp, this feature is used to subdivide the point cloud into subspaces according to the location of the doors. The correspondence between subspaces and building rooms is not unambiguous. One subspace always corresponds to one room, but one room is not necessarily depicted by just one subspace, for example, in case of a room containing several doors and in which the acquisition is performed in a discontinue way. The labelling problem is formulated as combinatorial approach solved as a minimum energy optimization. Once the point cloud is subdivided into building rooms, envelop (conformed by walls, ceilings and floors) is reconstructed for each space. The connectivity between spaces is included by adding the previously detected doors to the reconstructed model. The methodology is tested in a real case study.

Effect of door opening and defrost cycle on a freezer with phase change panels

International Nuclear Information System (INIS)

Gin, B.; Farid, M.M.; Bansal, P.K.

2010-01-01

An investigation into the effectiveness of phase change material (PCM) panels placed against the internal walls of a freezer to maintain stable temperatures in the presence of heat loads such as door openings, defrosting, and loss of electrical power was carried out. Temperature response was studied during loss of power, a defrost cycle lasting 30 min, and a door opening scheme of 13 door openings over an 11 h period. This PCM system has significantly decreased the rate of temperature increase inside the freezer during defrosting and power loss. Energy consumption was measured during steady operation, a defrost cycle of 30 min, and a scheme of eight door openings at 40 min intervals. It was found that heat loads caused greater energy consumption, and that the presence of PCM during defrosting and door openings resulted in slightly lower energy consumption compared to without PCM.

Dynamic Object Oriented Requirements System (DOORS) System Test Plan

International Nuclear Information System (INIS)

JOHNSON, A.L.

2000-01-01

The U. S. Department of Energy, Office of River Protection (ORP) will use the Dynamic Object Oriented Requirements System (DOORS) as a tool to assist in identifying, capturing, and maintaining the necessary and sufficient set of requirements for accomplishing the ORP mission. By managing requirements as one integrated set, the ORP will be able to carry out its mission more efficiently and effectively. DOORS is a Commercial-Off-The-Shelf (COTS) requirements management tool. The tool has not been customized for the use of the PIO, at this time

FDS5 Simulation for OECD PRISME Fire Test of DOOR PRSD5

International Nuclear Information System (INIS)

Lee, Kyu Bok; Park, Jong Seuk

2009-01-01

OECD/NEA PRISME Fire Project is an international co-operation project to investigate fire propagation by means of experiments and analyses for nuclear power plant applications. This project focuses on the generation of experimental data for fire and smoke propagation from the fire room to adjacent rooms under various conditions and room configurations. In addition, analyses using computer codes are performed to understand the phenomena of interest and to produce a consistent interpretation of the experimental results. The PRISME Project is composed of series of tests named as SOURCE, DOOR, LEAK and Global Tests. The SOURCE is composed of tests to characterize the fire source, and the DOOR is to study fire and smoke propagation through an open door, while the LEAK is to investigate hot gas leakages through other modes of openings such as holes, a slot, a duct, and a partially opened door. The Global test will be conducted as integral tests on the basis of the results of the previous separate effects tests. In this paper, simulations are performed with FDS5 computer code for the DOOR Test No.5 (PRS D 5) and the calculation results are compared with the corresponding experimental data to study the code capability to predict the phenomena of the hot gas propagation between two rooms

ATLAS TileCal Submodule Production Photos (2001)

CERN Multimedia

Errede, S.

2001-01-01

Photo 1 - Dirty Spacers Photo 2 - Washing Plates Photo 3 - Throw Photo 4 - Catch Photo 5 - Mascot Photo 6 - Glue Machine Photo 7 - Gluing Photo 8 - Finished submodule Photo 9 - Submodule being final welded Photo 10 - Paint tank Photo 11 - Submodule is wrapped Photo 12 - Exhaustion

A Comparative Study of Two Different Uncinectomy Techniques: Swing-Door and Classical

Directory of Open Access Journals (Sweden)

Ankit A Singhania

2011-01-01

Full Text Available Introduction: The aim of this study was to determine which technique of uncinectomy, classical or swing door technique.  Materials and Methods: Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS. Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. Results: The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. Conclusion: The authors recommend

A comparative study of two different uncinectomy techniques: swing-door and classical.

Science.gov (United States)

Singhania, Ankit A; Bansal, Chetan; Chauhan, Nirali; Soni, Saurav

2012-01-01

The aim of this study was to determine which technique of uncinectomy, classical or swing door technique. Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS). Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal) was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. The authors recommend swing door technique as it is easy to learn, allows complete removal of the

Flow of pedestrians through narrow doors with different competitiveness

International Nuclear Information System (INIS)

Garcimartín, A; Pastor, J M; Zuriguel, I; Parisi, D R; Martín-Gómez, C

2016-01-01

We report a thorough analysis of the intermittent flow of pedestrians through a narrow door. The observations include five different sets of evacuation drills with which we have investigated the effect of door size and competitiveness on the flow dynamics. Although the outcomes are in general compatible with the existence of the faster-is-slower effect, the temporal evolution of the instantaneous flow rate provides evidence of new features. These stress the crucial role of the number of people performing the tests, which has an influence on the obtained results. Once the transients at the beginning and end of the evacuation are removed, we have found that the time lapses between the passage of two consecutive pedestrians display heavy-tailed distributions in all the scenarios studied. Meanwhile, the distribution of burst sizes decays exponentially; this can be linked to a constant probability of finding a long-lasting clog during the evacuation process. Based on these results, a discussion is presented on the caution that should be exercised when measuring or describing the intermittent flow of pedestrians through narrow doors. (paper: interdisciplinary statistical mechanics)

INDOOR MODELLING FROM SLAM-BASED LASER SCANNER: DOOR DETECTION TO ENVELOPE RECONSTRUCTION

Directory of Open Access Journals (Sweden)

L. Díaz-Vilariño

2017-09-01

Full Text Available Updated and detailed indoor models are being increasingly demanded for various applications such as emergency management or navigational assistance. The consolidation of new portable and mobile acquisition systems has led to a higher availability of 3D point cloud data from indoors. In this work, we explore the combined use of point clouds and trajectories from SLAM-based laser scanner to automate the reconstruction of building indoors. The methodology starts by door detection, since doors represent transitions from one indoor space to other, which constitutes an initial approach about the global configuration of the point cloud into building rooms. For this purpose, the trajectory is used to create a vertical point cloud profile in which doors are detected as local minimum of vertical distances. As point cloud and trajectory are related by time stamp, this feature is used to subdivide the point cloud into subspaces according to the location of the doors. The correspondence between subspaces and building rooms is not unambiguous. One subspace always corresponds to one room, but one room is not necessarily depicted by just one subspace, for example, in case of a room containing several doors and in which the acquisition is performed in a discontinue way. The labelling problem is formulated as combinatorial approach solved as a minimum energy optimization. Once the point cloud is subdivided into building rooms, envelop (conformed by walls, ceilings and floors is reconstructed for each space. The connectivity between spaces is included by adding the previously detected doors to the reconstructed model. The methodology is tested in a real case study.

DoOR 2.0 - Comprehensive Mapping of Drosophila melanogaster Odorant Responses

Science.gov (United States)

Münch, Daniel; Galizia, C. Giovanni

2016-02-01

Odors elicit complex patterns of activated olfactory sensory neurons. Knowing the complete olfactome, i.e. the responses in all sensory neurons for all relevant odorants, is desirable to understand olfactory coding. The DoOR project combines all available Drosophila odorant response data into a single consensus response matrix. Since its first release many studies were published: receptors were deorphanized and several response profiles were expanded. In this study, we add unpublished data to the odor-response profiles for four odorant receptors (Or10a, Or42b, Or47b, Or56a). We deorphanize Or69a, showing a broad response spectrum with the best ligands including 3-hydroxyhexanoate, alpha-terpineol, 3-octanol and linalool. We include all of these datasets into DoOR, provide a comprehensive update of both code and data, and new tools for data analyses and visualizations. The DoOR project has a web interface for quick queries (http://neuro.uni.kn/DoOR), and a downloadable, open source toolbox written in R, including all processed and original datasets. DoOR now gives reliable odorant-responses for nearly all Drosophila olfactory responding units, listing 693 odorants, for a total of 7381 data points.

USRCRN Photo Information

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Photos of USRCRN stations and their immediate surroundings. Taken by engineering techs from NOAA's Atmospheric Turbulence and Diffusion Division (ATDD). Photos are...

Kodak's Photo CD and Proposed Photo YCC Color Standard.

Science.gov (United States)

Urrows, Henry; Urrows, Elizabeth

1991-01-01

Describes new technology being developed by Eastman Kodak for storing 35mm color photos on compact disk (CD) and discusses its applications for desktop publishing. Benefits of photo CD and costs are examined, a proposed universal color standard that is an improved way to represent color digitally is explained, and software is discussed. (LRW)

Satellite photo of CERN

CERN Multimedia

1991-01-01

This photo from the Landsat5 orbital telescope shows the locations of CERN's Meyrin and Prevessin sites near Geneva on the Swiss-France border. The tunnels housing the LHC and SPS accelerators are also illustrated. Photo credit: US Geological Survey/photo by Jane Doe.

CRN Photo Information

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Photos of CRN stations and their immediate surroundings. Taken by engineering techs from NOAA's Atmospheric Turbulence and Diffusion Division (ATDD). Photos are used...

Perancangan dan Proses Pembuatan Inner Door Panel Mobil Pick Up Multiguna

Directory of Open Access Journals (Sweden)

Bambang Prayogi

2014-09-01

Full Text Available Sejak tahun 2012 Jurusan Teknik Mesin bekerja sama dengan PT. INKA mengembangkan mobil murah multigna. Mobil pick up tersebut diberi nama GEA. Pengembangan dilakukan pada body, chasis dan engine. Sebagai bagian dari body, pintu mobil juga akan dikembangkan. Pada tahun 2013, penelitian terhadap posisi handle pengatur kaca jendela atau window regulator mobil pick up GEA telah dilakukan. Evaluasi tersebut mengharuskan adanya perubahan desain dari inner door panel. Suatu rancangan pengembangan desain inner door panel perlu dilakukan agar inner door panel dapat diproduksi secara massal. Langkah-langkah penelitian yang dilakukan meliputi penyusunan list of requirement untuk pengembangan konsep, analisa getaran dan tegangan yang terjadi pada panel dengan bantuan software CATIA. Selanjutnya perancangan proses pembuatan dan perancangan punch and dies-nya dilakukan. Dari analisa getaran yang dilakukan, dapat diketahui inner door panel memiliki frekuensi natural sebesar 166,94 Hz (10.016,4 rpm artinya panel aman dan tidak terpengaruh oleh getaran dari mesin mobil. Tegangan yang terjadi pada inner door panel akibat gaya pembebanan pada handle pintu bagian dalam adalah 2,9159 x 107 Pa (2,97 Kg/mm2 sehingga lebih kecil dari tegangan ijin materialnya 13,94 Kg/mm2 dan rancangan masih berada dalam kategori aman. Untuk membuat inner door panel dilakukan 3 macam proses pembentukan yaitu trimming, embossing dan piercing. Total gaya pembentukan masing-masing proses sebagai berikut: Gaya pembentukan proses trimming = 48.96 ton, proses embossing = 26.89 ton dan proses piercing = 41.66 ton. Window regulator yang disarankan untuk digunakan pada mobil pick up multiguna ini adalah scissor type window regulator dengan tenaga penggerak manual. Pada perancangan punch and dies, tegangan kompresi masing-masing proses dihitung dan hasilnya adalah sebagai berikut: Tegangan kompresi proses trimming 0.11 Kg/mm2, tegangan kompresi proses embossing 0.28 Kg/mm2, tegangan kompresi

Correlation-Preserving Photo Collage.

Science.gov (United States)

Liu, Lingjie; Zhang, Hongjie; Jing, Guangmei; Guo, Yanwen; Chen, Zhonggui; Wang, Wenping

2017-05-12

A new method is presented for producing photo collages that preserve content correlation of photos. We use deep learning techniques to find correlation among given photos to facilitate their embedding on the canvas, and develop an efficient combinatorial optimization technique to make correlated photos stay close to each other. To make efficient use of canvas space, our method first extracts salient regions of photos and packs only these salient regions. We allow the salient regions to have arbitrary shapes, therefore yielding informative, yet more compact collages than by other similar collage methods based on salient regions. We present extensive experimental results, user study results, and comparisons against the state-of-the-art methods to show the superiority of our method.

DOORS syndrome: phenotype, genotype and comparison with Coffin-Siris syndrome.

Science.gov (United States)

Campeau, Philippe M; Hennekam, Raoul C

2014-09-01

DOORS syndrome (Deafness, Onychodystrophy, Osteodystrophy, mental Retardation, Seizures) is characterized mainly by sensorineural deafness, shortened terminal phalanges with small nails of hands and feet, intellectual deficiency, and seizures. Half of the patients with all clinical features have mutations in TBC1D24. We review here the manifestations of patients clinically diagnosed with DOORS syndrome. In this cohort of 32 families (36 patients) we detected 13 individuals from 10 families with TBC1D24 mutations. Subsequent whole exome sequencing in the cohort showed the same de novoSMARCB1 mutation (c.1130G>A), known to cause Coffin-Siris syndrome, in two patients. Distinguishing features include retinal anomalies, Dandy-Walker malformation, scoliosis, rocker bottom feet, respiratory difficulties and absence of seizures, and 2-oxoglutaric aciduria in the patients with the SMARCB1 mutation. We briefly discuss the heterogeneity of the DOORS syndrome phenotype and the differential diagnosis of this condition. © 2014 Wiley Periodicals, Inc.

Ombuds’ corner: Open door and confidentiality

CERN Multimedia

Vincent Vuillemin

2013-01-01

For the Open Days, CERN will be transparent for all visitors. It's also the occasion to remember that the Ombuds' door is fully open every day of the year for all persons working for or on behalf of CERN.   The door is open, but as soon as it's closed for a discussion, the office becomes a place where total confidentiality is preserved. This may appear as a contradiction, no? The Ombuds is available to help everyone in all circumstances, but his clause of confidentiality prevents him from acting without the consent of his “visitors”. How can he possibly resolve the in-house conflicts in groups, or units, if all the parties do not voluntarily participate in its resolution? The answer is clear: the job of the Ombuds is to help the parties resolve their conflict by themselves. He will provide a few rules of communication, a process of mutual respect, suggest some possibilities that the parties may want to follow, and mediate the dispute so that people...

De fietsstraat : Onderzoek naar fietsverbindingen door verblijfsgebieden

NARCIS (Netherlands)

Andriesse, H.C.; Hansen, J.A.

1996-01-01

De bestaande fietsverbindingen in de stad lopen meestal langs doorgaande wegen met druk autoverkeer. Door de toename van het autoverkeer zijn deze verbindingen niet altijd meer de meest geschikte fietsvoorzieningen. Ook de maatregelen die in het kader van duurzaam veilig wegverkeer worden

Photo-electron spectroscopy using synchrotron radiation of molecular radicals and fragments produced by laser photo-dissociation

International Nuclear Information System (INIS)

Nahon, Laurent

1991-01-01

This research thesis reports the combined use of a laser and of a synchrotron radiation in order to respectively photo-dissociate a molecule and to photo-ionize fragments which are analysed by photo-electron spectroscopy. This association allows, on the one hand, radical photo-ionization to be studied, and, on the other hand, polyatomic molecule photo-dissociation to be studied. The author studied the photo-excitation and/or photo-ionization in layer 4d (resp. 3d) of atomic iodine (resp. bromine) produced almost complete laser photo-dissociation of I_2 (resp. Br_2). He discuses the processes of relaxation of transitions from valence 4d to 5p (resp. 3d to 4p) which occur either by direct self-ionization or by resonant Auger effect, and reports the study of photo-dissociation of s-tetrazine (C_2N_4H_2) [fr

In-tank photo analysis

International Nuclear Information System (INIS)

Vorvick, C.A.; Baird, D.B.; Heasler, P.G.

1995-09-01

This report documents an analysis performed by Pacific Northwest Laboratory (PNL) of photographs showing the interior of a single shell tank (SST) at the Hanford site. This report shows that in-tank photos can be used to create a plan-view map of the waste surface inside a tank, and that measuring the elevation of the waste surface from the photos is possible, but not accurate enough to be useful at this time. In-tank photos were acquired for Tanks BX111 and T111. The BX111 photos were used to create the waste surface map and to measure the waste surface elevation. T111 photos were used to measure the waste surface elevation. Uncertainty analyses of the mapping and surface elevation are included to show the accuracy of the calculations for both methods

Investigation into the acceptability of door locking to staff, patients, and visitors on acute psychiatric wards.

Science.gov (United States)

Muir-Cochrane, Eimear; van der Merwe, Marie; Nijman, Henk; Haglund, Kristina; Simpson, Alan; Bowers, Len

2012-02-01

There is disagreement among psychiatric professionals about whether the doors of acute psychiatric wards should be kept locked to prevent patients from leaving and harming themselves or others. This study explored patient, staff, and visitor perceptions about the acceptability of locking the ward door on acute psychiatric inpatient wards. Interviews were conducted with 14 registered nurses, 15 patients, and six visitors from three different acute wards. Findings revealed commonalities across all groups, with general agreement that locking the door reduced absconding. Staff expressed feelings of guilt, embarrassment, and fear of being blamed when a patient absconded. Staff also reported that open wards created anxious vigilance to prevent an abscond and increased workload in allocating staff to watch the door, whereas staff on partially-locked doors also perceived an increased workload in letting people in and out of the ward. Patients had mixed feelings about the status of the door, expressing depression, a sense of stigma, and low self-esteem when the door was locked. The issue of balancing safety and security on acute psychiatric wards against the autonomy of patients is not easily resolved, and requires focused research to develop innovative nursing practices. © 2011 The Authors. International Journal of Mental Health Nursing © 2011 Australian College of Mental Health Nurses Inc.

Photo, thermal and chemical degradation of riboflavin

Directory of Open Access Journals (Sweden)

Muhammad Ali Sheraz

2014-08-01

Full Text Available Riboflavin (RF, also known as vitamin B2, belongs to the class of water-soluble vitamins and is widely present in a variety of food products. It is sensitive to light and high temperature, and therefore, needs a consideration of these factors for its stability in food products and pharmaceutical preparations. A number of other factors have also been identified that affect the stability of RF. These factors include radiation source, its intensity and wavelength, pH, presence of oxygen, buffer concentration and ionic strength, solvent polarity and viscosity, and use of stabilizers and complexing agents. A detailed review of the literature in this field has been made and all those factors that affect the photo, thermal and chemical degradation of RF have been discussed. RF undergoes degradation through several mechanisms and an understanding of the mode of photo- and thermal degradation of RF may help in the stabilization of the vitamin. A general scheme for the photodegradation of RF is presented.

Advances in Home Photo Printing

Institute of Scientific and Technical Information of China (English)

Qian Lin; Brian Atkins; Huitao Luo

2004-01-01

With digital camera adoptions going main stream, consumers capture a record number of photos.Currently, the majority of the digital photos are printed at home. One of the key enablers of this transformation is the advancement of home photo printing technologies. In the past few years, inkjet printing technologies have continued to deliver smaller drop size, larger number of inks, and longer-lasting prints. In the mean time, advanced image processing automatically enhances captured digital photos while being printed. The combination of the above two forces has closed the gap between the home photo prints and AgX prints. It will give an overview of the home photo printing market and technology trends, and discuss major advancements in automatic image processing.

Raman Enhancement and Photo-Bleaching of Organic Dyes in the Presence of Chemical Vapor Deposition-Grown Graphene

Directory of Open Access Journals (Sweden)

Jiaxin Weng

2017-10-01

Full Text Available Fluorescent organic dyes photobleach under intense light. Graphene has been shown to improve the photo-stability of organic dyes. In this paper, we investigated the Raman spectroscopy and photo-bleaching kinetics of dyes in the absence/presence of chemical vapor deposition (CVD-grown graphene. We show that graphene enhances the Raman signal of a wide range of dyes. The photo-bleaching of the dyes was reduced when the dyes were in contact with graphene. In contrast, monolayer hexagonal boron nitride (h-BN was much less effective in reducing the photo-bleaching rate of the dyes. We attribute the suppression of photo-bleaching to the energy or electron transfer from dye to graphene. The results highlight the potential of CVD graphene as a substrate for protecting and enhancing Raman response of organic dyes.

Influence of the Pressure Difference and Door Swing on Heavy Contaminants Migration between Rooms.

Science.gov (United States)

Hendiger, Jacek; Chludzińska, Marta; Ziętek, Piotr

2016-01-01

This paper presents the results of investigations whose aim was to describe the influence of the pressure difference level on the ability of contaminants migration between neighbouring rooms in dynamic conditions associated with door swing. The analysis was based on airflow visualization made with cold smoke, which simulated the heavy contaminants. The test room was pressurized to a specific level and then the door was opened to observe the trail of the smoke plume in the plane of the door. The door was opened in both directions: to the positively and negatively pressurized room. This study focuses on the visualization of smoke plume discharge and an uncertainty analysis is not applicable. Unlike other studies which focus on the analysis of pressure difference, the present study looks at the contaminants which are heavier than air and on "pumping out" the contaminants by means of door swing. Setting the proper level of pressure difference between the contaminated room and the neighbouring rooms can prove instrumental in ensuring protection against toxic contaminants migration. This study helped to establish the threshold of pressure difference necessary to reduce migration of heavy contaminants to neighbouring rooms.

Evaluatie van het nieuwe RVV door weggebruikers : een samenvattend verslag van de nameting.

NARCIS (Netherlands)

Wittink, R.D.

1993-01-01

The new Dutch traffic regulations (RVV of 1990) have been effective since 1 November 1991. This paper presents the results of a door-to-door questionnaire survey among 655 sixteen year olds and older persons in order to investigate their knowledge and opinions about the new RVV. This survey carried

Experimental Studies of Wheelchair and Walker Users Passing Through Doors with Different Opening Force.

Science.gov (United States)

Nersveen, Jonny

2016-01-01

Users of walkers and users of different categories of wheelchairs tested doors with different opening force, aiming to reveal the limit that these groups of people could manage on an everyday basis. 94.7% of the wheelchair users reported that a door opening force of 30 N was acceptable, while as 92.1% of this group described 40 N as acceptable. Similarly, 100% of the walker users reported that a door opening force of 30 N was acceptable, while as 87,5% of this group described 40 N as acceptable.

The Romanesque Bronze Doors at Gniezno Cathedral Church: Some New Remarks

Directory of Open Access Journals (Sweden)

Tomasz Węcławowicz

2017-06-01

Full Text Available Among many Romanesque bronze doors in Europe the old entrance doors of the metropolitan cathedral in Gniezno, in the North Poland, are exceptional. For over a century many historians and historians of art have been trying to understand and explain its iconographic phenomenon. The Polish, Czech and German scholars have so far been unable to identify with any conviction, either the iconographic models or artistic provenance of the workshop. There were suggested some connections of the alleged bishop patrons to France and there were emphasizes technological possibilities of foundry workshops at the Meuse Valley. This “Meuse hypothesis” based mainly on historical suggestions became established as a certainty. However, it is important to emphasize the significant difference between the creator of the composition and of the craftsman who cast the bronze door. Years ago only Lech Kalinowski pointed out some general formal similarities to the North Italian sculpture. The purpose of this paper is to develop Kalinowski’s suggestions and to emphasise the puzzling similarities between details of Gniezno doors and some Emilian works executed by Master Wiligelmo da Modena and Master Nicolò. The concept of Italian relationship from Emilia province seems to be better for the comparative analysis than relationship with Meuse Valley based mostly on historical context. Crucial here is the additional, parallel analysis of the portal decoration in Czerwinsk Abbey.

Bunker door interlock limit issues of K-130 cyclotron, VECC

International Nuclear Information System (INIS)

Srihari, K.; Ravishankar, R.; Mitra, M.S.; Mishra, S.K.; Bandyopadhyay, T.; Sarkar, P.K.

2011-01-01

The K-130 cyclotron is in operation at VECC, Kolkata. Recently modernization of the cyclotron has taken place. Central region modification has increased reasonable internal beam current. During the tuning of the projectiles, loss of beam is unavoidable and projectiles hitting different parts of the machine inside the vacuum chamber . These interactions produce prompt radiation comprising neutron and gamma. However machine bunker is not accessible during the operation of the machine. The induced activity produced because of interactions of the primary and secondary radiation a radiation hazardous environment during the shut down for the related maintenance work. Area radiation monitors placed at machine bunker room have the interlock with massive shield door of the bunker. Area radiation monitors are set to specified limiting value, lower than that will allow to open the shield door in normal condition. As, the internal beam current being increased and the probability of beam spread being more. Consequently generation of induced activity is also high leading to delay in machine bunker door opening because of the interlock settings. Radiation dose mapping after a long operation of the machine was done for the different strategic points (The locations mainly people access immediate after shut down). Different consequences and remedial measures being presented in paper to raise the dose rate limit level for the interlocks between the area radiation monitors with machine bunker door, keeping in mind of the regulatory requirements. Raising the limit of dose rate limiting value will minimize the waiting time to access the machine bunker which will increase the duty factor of the machine. (author)

Ontwateren van zeugenmest door middel van omgekeerde osmose

NARCIS (Netherlands)

Thelosen, J.; Gastel, van J.; Cuyck, van J.

1992-01-01

In periodiek nummer 1 (februari 1991) is het proces van omgekeerde osmose reeds beschreven. In het kort komt omgekeerde osmose op het volgende neer: de te ontwateren vloeistof wordt onder hoge druk (55 bar) door filterbuizen gepompt.

Deeltjesemissie door wegverkeer: emissiefactoren, deeltjesgrootteverdeling en chemische samenstelling

NARCIS (Netherlands)

Brink RMM van den; LAE

1996-01-01

In deze literatuurstudie werden zowel gegevens over uitlaatgas-deeltjesemissie alsook over deeltjesemissie als gevolg van slijtage van banden, remvoering en wegdek ge-inventariseerd. Daarnaast werd aandacht besteed aan deeltjesemissie als gevolg van, door rijdend verkeer, opgewerveld stof. Naast

Plattelandimpuls : leren door gewoon te dóen

NARCIS (Netherlands)

Noorduyn, L.

2008-01-01

Plattelandsondernemers die hun activiteiten verbreden, vergeten nogal eens serieuze aandacht te besteden aan de vermarkting van hun product. Met het project PlattelandImpuls hebben ondernemers hun vaardigheden op dat vlak kunnen verbeteren door te werken met product-marktcombinaties.

Magnesium-made door frame for passenger cars; Pkw-Tuerrahmen aus Magnesium

Energy Technology Data Exchange (ETDEWEB)

Tikal, F.; Vollmer, C. [Kassel Univ. (Gesamthochschule) (Germany). Inst. fuer Produktionstechnik und Logistik

1997-11-01

One of the most complicated parts of a car is the door. An so it will be in the future. More and more parts will be integrated in a car`s door, especially safety and comfort related parts as well as a big number of functional elements. The car industry tries intensively to bring about a growing safety image to its buyers. At the Institute for Technical Production and Logistics (IPL) of the University of Kassel (GhK) a passenger door construction out of magnesium has been developed on the base of a foregoing construction. With the new practice orientated model the time of production could be essentially reduced while at the same time the weight could be decreased. (orig.) [Deutsch] Am Institut fuer Produktionstechnik und Logistik (ipl) der Universitaet Gesamthochschule Kassel wurde ein optimierter Magnesium-Druckguss-Rahmen fuer eine Pkw-Tuer, basierend auf einer vorangegangenen Arbeit, entwickelt. Mit dem neuen praxisnahen Modell konnte die Montagezeit erheblich reduziert und Gewicht eingespart werden. (orig.)

Desirability of Outcome Ranking (DOOR) and Response Adjusted for Duration of Antibiotic Risk (RADAR).

Science.gov (United States)

Evans, Scott R; Rubin, Daniel; Follmann, Dean; Pennello, Gene; Huskins, W Charles; Powers, John H; Schoenfeld, David; Chuang-Stein, Christy; Cosgrove, Sara E; Fowler, Vance G; Lautenbach, Ebbing; Chambers, Henry F

2015-09-01

Clinical trials that compare strategies to optimize antibiotic use are of critical importance but are limited by competing risks that distort outcome interpretation, complexities of noninferiority trials, large sample sizes, and inadequate evaluation of benefits and harms at the patient level. The Antibacterial Resistance Leadership Group strives to overcome these challenges through innovative trial design. Response adjusted for duration of antibiotic risk (RADAR) is a novel methodology utilizing a superiority design and a 2-step process: (1) categorizing patients into an overall clinical outcome (based on benefits and harms), and (2) ranking patients with respect to a desirability of outcome ranking (DOOR). DOORs are constructed by assigning higher ranks to patients with (1) better overall clinical outcomes and (2) shorter durations of antibiotic use for similar overall clinical outcomes. DOOR distributions are compared between antibiotic use strategies. The probability that a randomly selected patient will have a better DOOR if assigned to the new strategy is estimated. DOOR/RADAR represents a new paradigm in assessing the risks and benefits of new strategies to optimize antibiotic use. © The Author 2015. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Photo-electret effects in homogenous semiconductors

International Nuclear Information System (INIS)

Nabiev, G.A.

2004-01-01

In the given work is shown the opportunity and created the theory of photo-electret condition in semiconductors with Dember mechanism of photo-voltage generation. Photo-electret of such type can be created, instead of traditional and without an external field as a result of only one illumination. Polar factor, in this case, is the distinction of electrons and holes mobility. Considered the multilayered structure with homogeneous photoactive micro areas shared by the layers, which are interfering to alignment of carriers concentration. We consider, that the homogeneous photoactive areas contain deep levels of stick. Because of addition of elementary photo voltage in separate micro photo cells it is formed the abnormal-large photo voltage (APV-effect). Let's notice, that Dember photo-voltage in a separate micro photo-cell ≤kT/q. From the received expressions, in practically important, special case, when quasi- balance between valent zone and stick levels established in much more smaller time, than free hole lifetime, and we received, that photo-voltage is relaxing. Comparing of the received expressions with the laws of photo voltage attenuation in p-n- junction structures shows their identity; the difference is only in absolute meanings of photo voltage. During the illumination in the semiconductor are created the superfluous concentration of charge carriers and part from them stays at deep levels. At de-energizing light there is a gradual generation of carriers located at these levels

A poly(glycerol sebacate) based photo/thermo dual curable biodegradable and biocompatible polymer for biomedical applications.

Science.gov (United States)

Wang, Min; Lei, Dong; Liu, Zenghe; Chen, Shuo; Sun, Lijie; Lv, Ziying; Huang, Peng; Jiang, Zhongxing; You, Zhengwei

2017-10-01

Due to its biomimetic mechanical properties to soft tissues, excellent biocompatibility and biodegradability, poly (glycerol sebacate) (PGS) has emerged as a representative bioelastomer and been widely used in biomedical engineering. However, the typical curing of PGS needs high temperature (>120 °C), high vacuum (>1 Torr), and long duration (>12 h), which limit its further applications. Accordingly, we designed, synthesized and characterized a photo/thermo dual curable polymer based on PGS. Treatment of PGS with 2-isocyanatoethyl methacrylate without additional reagents readily produced a methacrylated PGS (PGS-IM). Photo-curing of PGS-IM for 10 min at room temperature using salt leaching method efficiently produced porous scaffolds with a thickness up to 1 mm. PGS-IM was adapt to thermo-curing as well. The combination of photo and thermo curing provided a further way to modulate the properties of resultant porous scaffolds. Interestingly, photo-cured scaffolds exhibited hierarchical porous structures carrying extensive micropores with a diameter from several to hundreds micrometers. All the scaffolds showed good elasticity and biodegradability. In addition, PGS-IM exhibited good compatibility with L929 fibroblast cells. We expect this new PGS based biomaterial will have a wide range of biomedical applications.

Assessment of operating room airflow using air particle counts and direct observation of door openings.

Science.gov (United States)

Teter, Jonathan; Guajardo, Isabella; Al-Rammah, Tamrah; Rosson, Gedge; Perl, Trish M; Manahan, Michele

2017-05-01

The role of the operating room (OR) environment has been thought to contribute to surgical site infection rates. The quality of OR air, disruption of airflow, and other factors may increase contamination risks. We measured air particulate counts (APCs) to determine if they increased in relation to traffic, door opening, and other common activities. During 1 week, we recorded APCs in 5-minute intervals and movement of health care workers. Trained observers recorded information about traffic, door openings, job title of the opener, and the reason for opening. At least 1 OR door was open during 47% of all readings. There were 13.4 door openings per hour during cases. Door opening rates ranged from 0.19-0.28 per minute. During this time, a total of 660 air measurements were obtained. The mean APCs were 9,238 particles (95% confidence interval [CI], 5,494- 12,982) at baseline and 14,292 particles (95% CI, 12,382-16,201) during surgery. Overall APCs increased 13% when either door was opened (P opening. We observed numerous instances of verbal communication and equipment movement. Improving efficiency of communication and equipment can aid in reduction of traffic. Further study is needed to examine links between microbiologic sampling, outcome data, and particulate matter to enable study of risk factors and effects of personnel movement. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

DOORS English--The Cognitive Basis of Rhetorical Models.

Science.gov (United States)

Taylor, Karl K.

1979-01-01

The Development of Operational Reasoning Skills (DOORS) program at Illinois Central College is an interdisciplinary experiment that guides students from concrete to formal operational levels of thought to ensure that they understand the concepts and cognitive skills undergirding the rhetorical modes. (RL)

O triste quadro da saúde: análise de um out-door

Directory of Open Access Journals (Sweden)

Fernando Lefèvre

1995-09-01

Full Text Available Procura-se, neste trabalho, analisar um out­door presente na cidade de São Paulo, no mês de maio de 1993, e que intitula-se : "O triste quadro da saúde". Em função de vários elementos encontrados no texto e em função do contexto externo, o referido out-door permite e possibilita, pelo menos, duas leituras de sentidos absolutamente opostos, o que, certamente, implica, no caso de um out-door "assinado", uma escolha inadequada da mensagem por parte dos signatários. Em função disso, sugere-se cuidado e atenção para a ambigüidade presente, com muita freqüência, nas mensagens e nos discursos.

Onderzoek naar voorkomen van zachte vruchten bij courgette in de afzetketen door optimale watergift

NARCIS (Netherlands)

Wijk, van C.A.P.; Wilms, J.A.M.

2008-01-01

Vochttekort tijdens de teelt werd door de telers als mogelijke oorzaak gezien. Het ‘weer’ is geen groeifactor waarop de tuinder kan sturen. Vochttekort is wel bij te sturen door water geven. Ter toetsing van de invloed van vochttekort is in 2006 in een late zomer/herfstteelt een proef aangelegd in

Photos from the CMS Photo Book

CERN Multimedia

Boreham, S

2008-01-01

Photos from the CMS Photo Book. Activities at Point 5 in Cessy, France, between 1998 - 2008. Images of assembly and Installation of the CMS detector: - Civil Engineering - Assembly in the Surface Building - Lowering of the Heavy Elements - Installing and connecting the CMS detector in the underground experiment These images illustrate the assembly, installation and commissioning of the CMS detector. They cover the activities at Point 5 in Cessy, France, between 1998 and 2008. CMS is one of the most complex scientific instruments ever built. It has taken about 20 years to go from conceptual design to the completion of construction of the CMS detector for the LHC start-up in September 2008. Accomplishing this has required the talents, efforts and resources of over 2500 scientists and engineers from about 180 institutions in 38 countries. caverns Compiled by: S. Cittolin, F. Marcastel and T.S. Virdee

ATLAS Pixel Group - Photo Gallery from Irradiation

CERN Multimedia

2001-01-01

Photos 1,2,3,4,5,6,7 - Photos taken before irradiation of Pixel Test Analog Chip and Pmbars (April 2000) Photos 8,9,10,11 - Irradiation of VDC chips (May 2000) Photos 12, 13 - Irradiation of Passive Components (June 2000) Photos 14,15, 16 - Irradiation of Marebo Chip (November 1999)

Photo-generated carriers lose energy during extraction from polymer-fullerene solar cells

KAUST Repository

Melianas, Armantas

2015-11-05

In photovoltaic devices, the photo-generated charge carriers are typically assumed to be in thermal equilibrium with the lattice. In conventional materials, this assumption is experimentally justified as carrier thermalization completes before any significant carrier transport has occurred. Here, we demonstrate by unifying time-resolved optical and electrical experiments and Monte Carlo simulations over an exceptionally wide dynamic range that in the case of organic photovoltaic devices, this assumption is invalid. As the photo-generated carriers are transported to the electrodes, a substantial amount of their energy is lost by continuous thermalization in the disorder broadened density of states. Since thermalization occurs downward in energy, carrier motion is boosted by this process, leading to a time-dependent carrier mobility as confirmed by direct experiments. We identify the time and distance scales relevant for carrier extraction and show that the photo-generated carriers are extracted from the operating device before reaching thermal equilibrium.

Intelligent Vision System for Door Sensing Mobile Robot

Directory of Open Access Journals (Sweden)

Jharna Majumdar

2012-08-01

Full Text Available Wheeled Mobile Robots find numerous applications in the Indoor man made structured environments. In order to operate effectively, the robots must be capable of sensing its surroundings. Computer Vision is one of the prime research areas directed towards achieving these sensing capabilities. In this paper, we present a Door Sensing Mobile Robot capable of navigating in the indoor environment. A robust and inexpensive approach for recognition and classification of the door, based on monocular vision system helps the mobile robot in decision making. To prove the efficacy of the algorithm we have designed and developed a ‘Differentially’ Driven Mobile Robot. A wall following behavior using Ultra Sonic range sensors is employed by the mobile robot for navigation in the corridors.  Field Programmable Gate Arrays (FPGA have been used for the implementation of PD Controller for wall following and PID Controller to control the speed of the Geared DC Motor.

Taking Your iPhoto '11 to the Max

CERN Document Server

Grothaus, Michael

2011-01-01

Taking Your iPhoto '11 to the Max walks users through Apple's most popular software application in the iLife suite - iPhoto. This book helps readers use iPhoto to its fullest to organize and create digital memories and keepsakes. * Learn all about Apple's newest version of iPhoto - iPhoto '11 * Explore iPhoto, one menu button at a time * Walk-through tutorials guide you step-by-step What you'll learn * How to import existing photo libraries from popular Windows applications * How to organize and edit your photos * How to tag your photos using iPhoto's Faces and Places features * How to create

On the excess photon noise in single-beam measurements with photo-emissive and photo-conductive cells

NARCIS (Netherlands)

Alkemade, C.T.J.

In this paper the so-called excess photon noise is theoretically considered with regard to noise power measurements with a single, illumined photo-emissive or photo-conductive cell. Starting from a modification of Mandel's stochastic association of the emission of photo-electrons with wave

An Intelligent Automated Door Control System Based on a Smart Camera

Directory of Open Access Journals (Sweden)

Jiann-Jone Chen

2013-05-01

Full Text Available This paper presents an innovative access control system, based on human detection and path analysis, to reduce false automatic door system actions while increasing the added values for security applications. The proposed system can first identify a person from the scene, and track his trajectory to predict his intention for accessing the entrance, and finally activate the door accordingly. The experimental results show that the proposed system has the advantages of high precision, safety, reliability, and can be responsive to demands, while preserving the benefits of being low cost and high added value.

The role of door orientation on occupant injury in a nearside impact: a CIREN, MADYMO modeling and experimental study.

Science.gov (United States)

Tencer, Allan F; Kaufman, Robert; Huber, Philippe; Mock, Charles

2005-12-01

This study addressed the effects of vehicle height mismatch in side impact crashes. A light truck or SUV tends to strike the door of a passenger car higher causing the upper border to lead into the occupant space. Conversely, an impact centered lower on the door, from a passenger car, causes the lower border to lead. We proposed the hypothesis that the type of injury sustained by the occupant could be related to door orientation during its intrusion into the passenger compartment. Data on door orientation and nearside occupant injuries were collected from 125 side impact crashes reported in the CIREN database. Experimental testing was performed using a pendulum carrying a frame and a vehicle door, impacting against a USDOT SID. The frame allowed the door orientation to be changed. A model was developed in MADYMO (v 6.2) using the more biofidelic dummies, BIOSID, and SIDIIs as well as USDOT SID. In side impact crashes with the lower border of the door leading, 81% of occupants sustained pelvic injury, 42% suffered rib fractures, and the rate of organ injury was 0.84. With the upper border leading, 46% of occupants sustained pelvic injury, 71% sustained rib fracture, and the rate of organ injuries per case increased to 1.13. The differences in the groups with respect to pelvic injury were significant at p = 0.01, rib fracture, p = 0.10, and organ injury, p = 0.001. Experimental testing showed that when the door angle changed from lower to upper border leading, peak T4 acceleration increased by 273% and pelvic acceleration decreased by 44%. The model demonstrated that when the door angle changed from lower to upper border leading, the USDOT SID showed a 29% increase in T4 acceleration and a 57% decrease in pelvic acceleration. The BIOSID dummy demonstrated a 36% increase in T1 acceleration, a 44% increase in abdominal rib 1 deflection, a 91% increase in thoracic rib 1 deflection, and a 33% decrease in pelvic acceleration. These data add more insight to the problem of

Location - Global Positioning System (GPS) Photos

Data.gov (United States)

Army Corps of Engineers, Department of the Army, Department of Defense — Digital photos tagged with GPS location information. The St. Paul District maintains a digital library of over 10,000 GPS photos. Photos are often associated with...

Efficient photo-catalytic degradation of malachite green using nickel tungstate material as photo-catalyst.

Science.gov (United States)

Helaïli, N; Boudjamaa, A; Kebir, M; Bachari, K

2017-03-01

The present study focused on the evaluation of photo-catalytic and photo-electrochemical properties of the photo-catalyst based on nickel tungstate material prepared by a nitrate method through the degradation of malachite green (MG) dye's. The effect of catalyst loading and dye concentration was examined. Physico-chemical, optical, electrical, electrochemical, and photo-electrochemical properties of the prepared material were analyzed by X-ray diffraction (XRD), fourier transform-infrared spectroscopy (FTIR), BET analysis, optical reflectance diffuse (DR), scanning electron microscopy (SEM/EDX), electrical conductivity, cyclic voltammetry (CV), current intensity, mott-shottky, and nyquist. XRD revealed the formation of monoclinic structure with a small particle size. BET surface area of the sample was around 10 m 2 /g. The results show that the degradation of MG was more than 80%, achieved after 3 h of irradiation at pH 4.6 and with a catalyst loading of 75 mg. Also, it was found that the dye photo-degradation obeyed the pseudo-first order kinetic via Langmuir Hinshelwood model.

Experimental evidence for electron localization on Au upon photo-activation of Au/anatase catalysts

NARCIS (Netherlands)

Carneiro, J.T.; Carneiro, Joana T.; Savenije, Tom J.; Mul, Guido

2009-01-01

Time resolved microwave conductivity (TRMC) measurements show that the presence of Au on anatase Hombikat UV100 significantly reduces the lifetime of mobile electrons formed by photo-excitation of this photocatalyst at 300 nm, providing evidence for the widely acclaimed electron localization effect

Plantenkaartjes uitgegeven door het I.V.O.N

NARCIS (Netherlands)

NN,

1959-01-01

De serie door het I.V.O.N. gepubliceerde verspreidingskaartjes van Nederlandse plantensoorten is wederom verkrijgbaar. De prijzen zijn als volgt: afl. 1, 1935, 21 kaartjes van diverse soorten f. 1.35 afl. 2, 1936, 32 kaartjes van diverse soorten „ 2.00 afl. 3, 1936, 18 kaartjes van Potamogeton „

24 CFR 3280.403 - Standard for windows and sliding glass doors used in manufactured homes.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Standard for windows and sliding... AND SAFETY STANDARDS Testing § 3280.403 Standard for windows and sliding glass doors used in manufactured homes. (a) Scope. This section sets the requirements for prime windows and sliding glass doors...

Medium-to-high prevalence of screening-detected parkinsonism in the urban area of Tehran, Iran: data from a community-based door-to-door study.

Science.gov (United States)

Fereshtehnejad, Seyed-Mohammad; Shafieesabet, Mahdiyeh; Rahmani, Arash; Delbari, Ahmad; Lökk, Johan

2015-01-01

Parkinsonism occurs in all ethnic groups worldwide; however, there are wide variations in the prevalence rates reported from different countries, even for neighboring regions. The huge socioeconomic burden of parkinsonism necessitates the need for prevalence studies in each country. So far, there is neither data registry nor prevalence information on parkinsonism in the Iranian population. The aim of our study was to estimate the prevalence rate of probable parkinsonism in a huge urban area in Iran, Tehran using a community-based door-to-door survey. We used a random multistage sampling of the households within the network of health centers consisting of 374 subunits in all 22 districts throughout the entire urban area of Tehran. Overall, 20,621 individuals answered the baseline checklist and screening questionnaire and data from 19,500 persons aged ≥30 years were entered in the final analysis. Health care professionals used a new six-item screening questionnaire for parkinsonism, which has been previously shown to have a high validity and diagnostic value in the same population. A total of 157 cases were screened for parkinsonism using the validated six-item questionnaire. After age and sex adjustment based on the Tehran population, the prevalence of parkinsonism was calculated as 222.9 per 100,000. Using the World Health Organization's World Standard Population, the standardized prevalence rate of parkinsonism was 285 per 100,000 (95% confidence interval 240-329). The male:female ratio of probable parkinsonism was calculated as 1.62, and there was a significant increase in the screening rate by advancing age. The calculated rates for the prevalence of parkinsonism in our study are closer to reports from some European and Middle Eastern countries, higher than reports from Eastern Asian and African populations, and lower than Australia. The prevalence rate of >200 in 100,000 for parkinsonism in Tehran, Iran could be considered a medium-to-high rate.

DYNAMIC TIME HISTORY ANALYSIS OF BLAST RESISTANT DOOR USING BLAST LOAD MODELED AS IMPACT LOAD

Directory of Open Access Journals (Sweden)

Y. A. Pranata

2012-06-01

Full Text Available A blast resistant single door was designed to withstand a 0.91 bar blast pressure and 44 ms blast duration. The analysis was done using Dynamic Time History Analysis using Blast Load modeled as Impact Load for given duration. The material properties used have been modified to accommodate dynamic effects. The analysis was done using dynamic finite element method (fem for time of the blast duration, and the maximum/minimum internal forces and displacement were taken from the time history output, in order to know the behavior under blast load and estimate the safety margin of the door. Results obtained from this research indicated that the maximum z-displacement is 1.709 mm, while in the term of serviceability, the permitted is 25 mm. The maximum reaction force is 73,960 N, while the maximum anchor capacity is 82,069 N. On blast condition, the maximum frame stress is 71.71 MPa, the maximum hinge shear stress is 45.28 MPa. While on rebound condition, the maximum frame stress is 172.11 MPa, the maximum hinge shear stress is 29.46 MPa. The maximum door edge rotation is 0.44 degree, which is not exceed the permitted boundary (1.2 degree. Keywords: Dynamic time history, blast resistant door, single door, finite element method.

Compact Birefringent Waveplates Photo-Induced in Silica by Femtosecond Laser

Directory of Open Access Journals (Sweden)

Matthieu Lancry

2014-09-01

Full Text Available Recently, we showed that femtosecond laser induced “nanogratings” consist of thin regions with a low refractive index (Δn = −0.15, due to the formation of nanoporous silica surrounded by regions with a positive index change. In this paper, we investigate a wide range of laser parameters to achieve very high retardance within a single layer; as much as 350 nm at λ = 546 nm but also to minimize the competing losses. We show that the total retardance depends on the number of layers present and can be accumulated in the direction of laser propagation to values higher than 1600 nm. This opens the door to using these nanostructures as refined building blocks for novel optical elements based on strong retardance.

DE VERWOESTINGEN VAN BABYLON DOOR DARIUS I EN ...

African Journals Online (AJOL)

Test

Het is alles behalve gemakkelijk deze bedreigingen in hun historisch verband te rangschikken. Bij een profetie als Jes. 21: „Gevallen, gevallen is Babel en al haar afgodsbeelden heeft. Hij ter aarde verbrijzeld”—zou men nog aan de eerste berichten kunnen denken, die Jeruzalem omtrent de verwoesting van Babylon door ...

Portal: Your Door to World Languages and Cultures

Science.gov (United States)

Elliott, Don; Lawton, Rachele

2009-01-01

Portal: Your Door to World Languages and Cultures was a series of public cultural events, in a variety of formats, created through a new partnership between the credit and continuing education (noncredit) foreign language programs at the Community College of Baltimore County (CCBC). Portal was designed to cultivate interest in foreign languages…

Development of the automated bunker door by using a microcontroller-system

Science.gov (United States)

Ahmad, M. A.; Leo, K. W.; Mohamad, G. H. P.; Ahmad, A.; Hashim, S. A.; Chulan, R. M.; Baijan, A. H.

2018-01-01

The new low energy electron beam accelerator bunker was designed and built locally to allocate a 500 keV electron beam accelerator at Block 43T in Malaysian Nuclear Agency. This bunker is equipped with a locally made radiation shielding door of 10 tons. Originally, this door is moving manually by a wheel and fitted with a gear system. However, it is still heavy and need longer time to operate it manually. To overcome those issues, a new automated control system has been designed and developed. In this paper, the complete steps and design of automated control system based on the microcontroller (PIC16F84A) is described.

High-Efficiency Graphene Photo Sensor Using a Transparent Electrode

Institute of Scientific and Technical Information of China (English)

LIU Tao; HUANG Zheng

2011-01-01

We report the first implementation of transparent electrodes in bottom-gate graphene transistors used for photo detection.Compared to conventional nontransparent electrodes,the transparent electrodes allow photons to transmit through to the graphene beneath,providing an enlarged absorption area and thereby giving rise to an enhancement of photocurrent generation.The devices are fabricated with an asymmetric metallization scheme and the experimental results show that the maximum photocurrent density using the transparent electrodes (ITO and Pd/ITO) is over two times higher than that using the nontransparent electrodes (Ti and Pd),indicating a significant enhancement in the performance of graphene photo sensors.Graphene,a single-atomic-layer of carbon atoms with a zero-gap band structure has received great attention recently.[1-4] One promising application of graphene is in high-speed photodetection,owing to its high Fermi velocity (～1/300 of the speed of light),high electrical mobility (200000 cm2/Vs for both electrons and holes) and zero-gap induced wide absorption spectrum (in the visible-to-infrared range).[5,6]%We report the first implementation of transparent electrodes in bottom-gate graphene transistors used for photo detection. Compared to conventional nontransparent electrodes, the transparent electrodes allow photons to transmit through to the graphene beneath, providing an enlarged absorption area and thereby giving rise to an enhancement of photocurrent generation. The devices are fabricated with an asymmetric metallization scheme and the experimental results show that the maximum photocurrent density using the transparent electrodes (ITO and Pd/ITO) is over two times higher than that using the nontransparent electrodes (Ti and Pd), indicating a significant enhancement in the performance of graphene photo sensors.

Screening for Total Carotenoids and β-Carotene in Some Widely ...

African Journals Online (AJOL)

machinery and protect them against photo-damage. (Alexander, 1999). Carotenoids are notable for their wide distribution, structural diversity, and of various ... Squash (Curcurbita moschata), Spinach (Amaranthus gangeticus), Tomatoe (Lycopersicon esculentum) and. Waterleaf (Talinum triangulare) were purchased from.

Computer-assisted photo identification outperforms visible implant elastomers in an endangered salamander, Eurycea tonkawae.

Directory of Open Access Journals (Sweden)

Nathan F Bendik

Full Text Available Despite recognition that nearly one-third of the 6300 amphibian species are threatened with extinction, our understanding of the general ecology and population status of many amphibians is relatively poor. A widely-used method for monitoring amphibians involves injecting captured individuals with unique combinations of colored visible implant elastomer (VIE. We compared VIE identification to a less-invasive method - computer-assisted photographic identification (photoID - in endangered Jollyville Plateau salamanders (Eurycea tonkawae, a species with a known range limited to eight stream drainages in central Texas. We based photoID on the unique pigmentation patterns on the dorsal head region of 1215 individual salamanders using identification software Wild-ID. We compared the performance of photoID methods to VIEs using both 'high-quality' and 'low-quality' images, which were taken using two different camera types and technologies. For high-quality images, the photoID method had a false rejection rate of 0.76% compared to 1.90% for VIEs. Using a comparable dataset of lower-quality images, the false rejection rate was much higher (15.9%. Photo matching scores were negatively correlated with time between captures, suggesting that evolving natural marks could increase misidentification rates in longer term capture-recapture studies. Our study demonstrates the utility of large-scale capture-recapture using photo identification methods for Eurycea and other species with stable natural marks that can be reliably photographed.

Practices surrounding children's photos in homes

NARCIS (Netherlands)

Vyas, Dhaval; van der Veer, Gerrit C.; Nijholt, Antinus; Grassel, Guido; Chi, E.H.; Höök, K,

2012-01-01

New parents cherish photos of their children. In their homes one can observe a varied set of arrangements of their young ones' photos. We studied eight families with young children to learn about their practices related to photos. We provide preliminary results from the field study and elaborate on

Quantification of the validity of simulations based on Geant4 and FLUKA for photo-nuclear interactions in the high energy range

Science.gov (United States)

Quintieri, Lina; Pia, Maria Grazia; Augelli, Mauro; Saracco, Paolo; Capogni, Marco; Guarnieri, Guido

2017-09-01

Photo-nuclear interactions are relevant in many research fields of both fundamental and applied physics and, for this reason, accurate Monte Carlo simulations of photo-nuclear interactions can provide a valuable and indispensable support in a wide range of applications (i.e from the optimisation of photo-neutron source target to the dosimetric estimation in high energy accelerator, etc). Unfortunately, few experimental photo-nuclear data are available above 100 MeV, so that, in the high energy range (from hundreds of MeV up to GeV scale), the code predictions are based on physical models. The aim of this work is to compare the predictions of relevant observables involving photon-nuclear interaction modelling, obtained with GEANT4 and FLUKA, to experimental data (if available), in order to assess the code estimation reliability, over a wide energy range. In particular, the comparison of the estimated photo-neutron yields and energy spectra with the experimental results of the n@BTF experiment (carried out at the Beam Test Facility of DaΦne collider, in Frascati, Italy) is here reported and discussed. Moreover, the preliminary results of the comparison of the cross sections used in the codes with the"evaluated' data recommended by the IAEA are also presented for some selected cases (W, Pb, Zn).

Evaluation of the door-to-needle time in patients undergoing fibrinolytic therapy after acute myocardial infarction

International Nuclear Information System (INIS)

Jehangir, W.; Daood, M.S.; Khan, M.

2009-01-01

Early thrombolysis with fibrinolytic therapy has reduced mortality following acute myocardial infarction (AMI) with the major effect coming from early achievement of infarct-related artery potency. This study was carried out to determine the door-to-needle time in patients undergoing fibrinolytic therapy after acute myocardial infarction and to identify factors associated with a prolonged door-to-needle time. This was a cross sectional study in which patients who were thrombolysed for AMI with streptokinase at Punjab Institute of Cardiology, Lahore, from December 12, 2008 to February 18, 2009 were included. All patients admitted with AMI, who were candidates for fibrinolysis, were included. The time of infarction and time of arrival in hospital was determined with ECG changes and asking from patient and/or relatives. The reasons for delay of arrival were asked from patient and accompanying attendants where possible. A door-to-needle time of <30 min could be achieved in 110 of our 201 patients (54.72%). Mean door-to-needle time was 55.13 (+-71.04) minutes. A door-to-needle time of less than 30 minutes in 54.72% is comparable to most contemporary studies however there is a need to look into factors associated with delay. (author)

External debt and capital flight in Nigeria: Is there a revolving door?

Directory of Open Access Journals (Sweden)

OT Ajilore

2014-10-01

Full Text Available Using the residual method of capital flight estimation, this paper estimates Nigerian capital flight over the period 1970 - 2001 and finds a close correlation between external debt and capital flight flows. This phenomenon suggests a paradoxical revolving door of a bi-directional flow of capital, i.e. where capital enters the country in the guise of external borrowing and simultaneously slips out of the country as private capital flight. The research question addressed by this paper is whether such a financial revolving door relationship exists in Nigeria, just as previous empirical researches had established in a number of countries. The paper utilises a simultaneous equation model and three stage least square estimation technique (3SLS, in addition to two-way Granger causality tests, to obtain statistical evidence that confirms the existence of a financial revolving door relationship between the two endogenous variables. In addition, existence of stronger causality from debt to capital flight is instrumental in showing that growing public deficit and the resulting increase in external debt is being used as a transfer mechanism for capital flight.

Content-aware automatic cropping for consumer photos

Science.gov (United States)

Tang, Hao; Tretter, Daniel; Lin, Qian

2013-03-01

Consumer photos are typically authored once, but need to be retargeted for reuse in various situations. These include printing a photo on different size paper, changing the size and aspect ratio of an embedded photo to accommodate the dynamic content layout of web pages or documents, adapting a large photo for browsing on small displays such as mobile phone screens, and improving the aesthetic quality of a photo that was badly composed at the capture time. In this paper, we propose a novel, effective, and comprehensive content-aware automatic cropping (hereafter referred to as "autocrop") method for consumer photos to achieve the above purposes. Our autocrop method combines the state-of-the-art context-aware saliency detection algorithm, which aims to infer the likely intent of the photographer, and the "branch-and-bound" efficient subwindow search optimization technique, which seeks to locate the globally optimal cropping rectangle in a fast manner. Unlike most current autocrop methods, which can only crop a photo into an arbitrary rectangle, our autocrop method can automatically crop a photo into either a rectangle of arbitrary dimensions or a rectangle of the desired aspect ratio specified by the user. The aggressiveness of the cropping operation may be either automatically determined by the method or manually indicated by the user with ease. In addition, our autocrop method is extended to support the cropping of a photo into non-rectangular shapes such as polygons of any number of sides. It may also be potentially extended to return multiple cropping suggestions, which will enable the creation of new photos to enrich the original photo collections. Our experimental results show that the proposed autocrop method in this paper can generate high-quality crops for consumer photos of various types.

Photo-switching element

Energy Technology Data Exchange (ETDEWEB)

Masaki, Yuichi

1987-10-31

Photo-input MOS transistor (Photo-switching element) cannot give enough ON/OFF ratio but requires an auxiliary condenser for a certain type of application. In addition, PN junction of amorphous silicon is not practical because it gives high leak current resulting in low electromotive force. In this invention, a solar cell was constructed with a lower electrode consisting of a transparent electro-conducting film, a photosensitive part consisting of an amorphous Si layer of p-i-n layer construction, and an upper metal electrode consisting of Cr or Nichrome, and a thin film transistor was placed on the solar cell, and further the upper metal electrode was co-used as a gate electrode of the thin film transistor; this set-up of this invention enabled to attain an efficient photo-electric conversion of the incident light, high electromotive force of the solar cell, and the transistor with high ON/OFF ratio. (3 figs)

Thermionic and Photo-Excited Electron Emission for Energy-Conversion Processes

Energy Technology Data Exchange (ETDEWEB)

McCarthy, Patrick T. [Birck Nanotechnology Center, School of Mechanical Engineering, Purdue University, West Lafayette, IN (United States); Reifenberger, Ronald G. [Birck Nanotechnology Center, School of Physics, Purdue University, West Lafayette, IN (United States); Fisher, Timothy S., E-mail: tsfisher@purdue.edu [Birck Nanotechnology Center, School of Mechanical Engineering, Purdue University, West Lafayette, IN (United States)

2014-12-09

This article describes advances in thermionic and photo-emission materials and applications dating back to the work on thermionic emission by Guthrie (1873) and the photoelectric effect by Hertz (1893). Thermionic emission has been employed for electron beam generation from Edison’s work with the light bulb to modern day technologies such as scanning and transmission electron microscopy. The photoelectric effect has been utilized in common devices such as cameras and photocopiers while photovoltaic cells continue to be widely successful and further researched. Limitations in device efficiency and materials have thus far restricted large-scale energy generation sources based on thermionic and photoemission. However, recent advances in the fabrication of nanoscale emitters suggest promising routes for improving both thermionic and photo-enhanced electron emission along with newly developed research concepts, e.g., photonically enhanced thermionic emission. However, the abundance of new emitter materials and reduced dimensions of some nanoscale emitters increases the complexity of electron-emission theory and engender new questions related to the dimensionality of the emitter. This work presents derivations of basic two and three-dimensional thermionic and photo-emission theory along with comparisons to experimentally acquired data. The resulting theory can be applied to many different material types regardless of composition, bulk, and surface structure.

Psychiatric wards with locked doors--advantages and disadvantages according to nurses and mental health nurse assistants.

Science.gov (United States)

Haglund, K; von Knorring, L; von Essen, L

2006-04-01

To describe nurses' and mental health nurse assistants' perceptions of advantages and disadvantages about working on a psychiatric ward with a locked entrance door. Psychiatric staff sometimes needs to protect patients from harming themselves or others. To keep the entrance door locked may help staff to achieve this goal. How locked entrance doors at psychiatric wards are experienced by staff, working on these wards, has been investigated to a very limited extent. The study was explorative and descriptive. Audio taped, semi-structured interviews with open-ended questions about advantages and disadvantages about working on a psychiatric ward with a locked entrance door, were conducted with 20 nurses and 20 mental health nurse assistants. Data were analyzed with content analysis. A content analysis revealed eight categories of advantages and 18 categories of disadvantages. Most advantages mentioned by nurses and mental health nurse assistants were categorized as providing staff with control over patients, providing patients with a secure and efficient care and protecting patients and staff against 'the outside'. Most disadvantages mentioned by nurses were categorized as causing extra work for staff, making patients feel confined, making patients feel dependent and creating a non-caring environment. Most disadvantages mentioned by mental health nurse assistants were categorized as causing extra work for staff, making patients feel confined, causing emotional problems for patients, making staff's power obvious and forcing patients to adapt to other patients' needs. Nurses and mental health nurse assistants mentioned more disadvantages than advantages and nurses mentioned more disadvantages than mental health nurse assistants. Nurses and mental health nurse assistants perceive a number of advantages and disadvantages for themselves, patients and significant others with a locked door at a psychiatric ward. Most of these concern patients' experiences. It is important for

Photo oxidative degradation of azure-B by sono-photo-Fenton and photo-Fenton reagents

Directory of Open Access Journals (Sweden)

Prahlad Vaishnave

2014-12-01

Full Text Available A model for the decomposition of azure-B by photo-Fenton reagent in the presence of ultrasound in homogeneous aqueous solution has been described. The photochemical decomposition rate of azure-B is markedly increased in the presence of ultrasound. It is a rather inexpensive reagent for wastewater treatment. The effect of different variables like the concentration of ferric ion, concentration of dye, hydrogen peroxide, pH, light intensity etc. on the reaction rate has been observed. The progress of the sono-photochemical degradation was monitored spectrophotometrically. The optimum sono-photochemical degradation conditions were experimentally determined. The results showed that the dye was completely oxidized and degraded into CO2 and H2O. A suitable tentative mechanism for sono-photochemical bleaching of azure-B by sono-photo-Fenton’s reaction has been proposed.

Self-testing security sensor for monitoring closure of vault doors and the like

International Nuclear Information System (INIS)

Cawthorne, D.C.

1997-01-01

A self-testing device is provided for a monitoring system for monitoring whether a closure member such as a door or window is closed. The monitoring system includes a switch unit mounted on the frame of the closure member being monitored and including magnetically biased switches connected in one or more electrical monitoring circuits, and a door magnet unit mounted on the closure member being monitored. The door magnet includes one or more permanent magnets that produce a magnetic field which, when the closure member is closed, cause said switches to assume a first state. When the closure member is opened, the switches switch to a second, alarm state. The self-testing device is electrically controllable from a remote location and produces a canceling or diverting magnetic field which simulates the effect of movement of the closure member from the closed position thereof without any actual movement of the member. 5 figs

Ground-based photo monitoring

Science.gov (United States)

Frederick C. Hall

2000-01-01

Ground-based photo monitoring is repeat photography using ground-based cameras to document change in vegetation or soil. Assume those installing the photo location will not be the ones re-photographing it. This requires a protocol that includes: (1) a map to locate the monitoring area, (2) another map diagramming the photographic layout, (3) type and make of film such...

Photo-polymer for recording holograms

International Nuclear Information System (INIS)

Hideo Tanigawa; Taichi Ichihashi; Takashi Matsuo

1999-01-01

The photo-polymerizable materials for recording holograms were composed of higher-index polymers, lower-index monomers, and photo-initiators. The materials have sensitivity from UV green light (514.5 nm ). The diffraction efficiencies of the transmission holograms recorded by two beams from a laser were more than 80%. These holograms have good physical and chemical stability. The mechanisms of the formation of holograms was discussed. In this paper, experimental results for transmission holograms are reported and the mechanisms of refractive index modulation in photo-polymerization of the materials are discussed

DOORS Syndrome: Phenotype, Genotype and Comparison With Coffin-Siris Syndrome

NARCIS (Netherlands)

Campeau, Philippe M.; Hennekam, Raoul C.; Aftimos, Salim; Banka, Siddharth; Begleiter, Michael L.; Bilo, Leonilda; Blair, Edward; Burrage, Lindsay C.; Liu, David S.; de Bie, Isabelle; Félix, Têmis Maria; Giltay, Jacques C.; Gibbs, Richard A.; Giuliano, Fabienne; Hadzsiev, Kinga; Hori, Mutsuki; Kariminejad, Ariana; Kayserili, Hülya; Kerr, Bronwyn; Lee, Brendan H.; Lu, James T.; Male, Alison; Meenakshi, Girish; Mey, Antje; Murray, Mitzi L.; Nair, Lal D. V.; Nampoothiri, Sheela; Newman, William G.; Peluso, Silvio; Peters, Heidi; Powell, R.; Repetto, Gabriela M.; Rump, Patrick; Santos-Simarro, Fernando; Stewart, Fiona; van Bever, Yolande; van den Ende, Jenneke; Wieczorek, Dagmar; Wisniewska, Marzena; Sisodiya, Sanjay M.

2014-01-01

DOORS syndrome (Deafness, Onychodystrophy, Osteodystrophy, mental Retardation, Seizures) is characterized mainly by sensorineural deafness, shortened terminal phalanges with small nails of hands and feet, intellectual deficiency, and seizures. Half of the patients with all clinical features have

Barriers to and enablers for European rail freight transport for integrated door-to-door logistics service. Part 1: Barriers to multimodal rail freight transport

Directory of Open Access Journals (Sweden)

Dewan Md Zahurul ISLAM

2014-09-01

Full Text Available The objective of this paper is to examine and identify barriers to and enablers for the European rail freight transport services as a transport chain partner along the supply chains in the changing market scenario. The changing market scenario includes, among others, requiring 'door-to-door' rather than 'terminal to terminal' and integrated service, competitive ability to attract non-rail cargo type, changes in the customer requirements (e.g. reliable service and changes in the operational requirements and practices. Using a literature review method, the paper is presented in two parts. The part 1 focuses on the identification of barriers to the European rail freight service by reviewing freight logistics services for global supply chains followed by the current performance of European rail freight transport followed by a discussion on the rail freight market liberalisation in Europe. Then rail freight transport in the Unites States (U.S. is discussed. The research notes that although the background, scope and necessity for reform measures in Europe differ from those of the U.S., some lessons can be learned and the main lesson is that an appropriate reform measure can enhance rail sector competitive ability in Europe. Examining and identifying the barriers in the part 1 (with the pan-Pacific examples of rail freight transports, the part 2 of the paper focuses on recommending clear actions and steps as enablers for the rail freight industry in general and operators in particular. The research in part 1 of the paper finds that: •\tIn many European countries, the rail freight market is not fully liberalised. In such market segment, infrastructure managers do act independently for incumbents and new entrant operators that hamper the progress of building a competitive market; •\tThe rail operators have not yet achieved the service quality (e.g. customer tailored service needed for the modern supply chains; •\tThey operate �

Nanoparticle-assisted photo-Fenton reaction for photo-decomposition of humic acid

Science.gov (United States)

Banik, Jhuma; Basumallick, Srijita

2017-11-01

We report here the synthesis of CuO-doped ZnO composite nanomaterials (NMs) by chemical route and demonstrated for the first time that these NMs are efficient catalysts for H2O2-assisted photo-decomposition (photo-Fenton type catalyst) of humic acid, a natural pollutant of surface water by solar irradiation. This has been explained by faster electron transfer to OH radical at the p-n hetero-junction of this composite catalyst. Application of this composite catalyst in decomposing humus substances of local pond water by solar energy has been demonstrated.

High voltage photo switch package module

Science.gov (United States)

Sullivan, James S; Sanders, David M; Hawkins, Steven A; Sampayan, Stephen E

2014-02-18

A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces, and at least one light-input surface. First metallic layers are formed on the electrode-interface surfaces, and one or more optical waveguides having input and output ends are bonded to the substrate so that the output end of each waveguide is bonded to a corresponding one of the light-input surfaces of the photo-conductive substrate. This forms a waveguide-substrate interface for coupling light into the photo-conductive wafer. A dielectric material such as epoxy is then used to encapsulate the photo-conductive substrate and optical waveguide so that only the metallic layers and the input end of the optical waveguide are exposed. Second metallic layers are then formed on the first metallic layers so that the waveguide-substrate interface is positioned under the second metallic layers.

Polymer Electrolyte Membranes for Water Photo-Electrolysis

Science.gov (United States)

Aricò, Antonino S.; Girolamo, Mariarita; Siracusano, Stefania; Sebastian, David; Baglio, Vincenzo; Schuster, Michael

2017-01-01

Water-fed photo-electrolysis cells equipped with perfluorosulfonic acid (Nafion® 115) and quaternary ammonium-based (Fumatech® FAA3) ion exchange membranes as separator for hydrogen and oxygen evolution reactions were investigated. Protonic or anionic ionomer dispersions were deposited on the electrodes to extend the interface with the electrolyte. The photo-anode consisted of a large band-gap Ti-oxide semiconductor. The effect of membrane characteristics on the photo-electrochemical conversion of solar energy was investigated for photo-voltage-driven electrolysis cells. Photo-electrolysis cells were also studied for operation under electrical bias-assisted mode. The pH of the membrane/ionomer had a paramount effect on the photo-electrolytic conversion. The anionic membrane showed enhanced performance compared to the Nafion®-based cell when just TiO2 anatase was used as photo-anode. This was associated with better oxygen evolution kinetics in alkaline conditions compared to acidic environment. However, oxygen evolution kinetics in acidic conditions were significantly enhanced by using a Ti sub-oxide as surface promoter in order to facilitate the adsorption of OH species as precursors of oxygen evolution. However, the same surface promoter appeared to inhibit oxygen evolution in an alkaline environment probably as a consequence of the strong adsorption of OH species on the surface under such conditions. These results show that a proper combination of photo-anode and polymer electrolyte membrane is essential to maximize photo-electrolytic conversion. PMID:28468242

Knocking on a wide open door

DEFF Research Database (Denmark)

Kragelund, Peter

2009-01-01

The current strong foothold of Chinese enterprises on the African continent concerns many western observers. They fear that the West will lose leverage in Africa and simultaneously postpone development. Paradoxically, the advance of Chinese enterprises in Africa is not only the result of delibera...

iPhoto '11 The Missing Manual

CERN Document Server

Pogue, David

2011-01-01

With better ways to get your photos online and new options for creating printed projects, iPhoto '11 makes it easier than ever to transfer photos from a digital camera, organize them, and publish, print, or share them in maps-but there's still no printed manual for the program. Fortunately, David Pogue and Lesa Snider team up in this witty, authoritative book that should have been in the box. Organize your collection. Discover all of the options for grouping your pictures-by events, in albums, or based on who's in the photo or where it was taken.Sharpen your editing skills. Learn how to use

Enhanced photo(geno)toxicity of demethylated chlorpromazine metabolites

Energy Technology Data Exchange (ETDEWEB)

Palumbo, Fabrizio [Instituto de Tecnología Química UPV-CSIC/Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia (Spain); Garcia-Lainez, Guillermo [Instituto de Investigación Sanitaria (IIS) La Fe, Hospital Universitari i Politècnic La Fe, Avenida de Fernando Abril Martorell 106, 46026 Valencia (Spain); Limones-Herrero, Daniel [Instituto de Tecnología Química UPV-CSIC/Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia (Spain); Coloma, M. Dolores; Escobar, Javier [Instituto de Investigación Sanitaria (IIS) La Fe, Hospital Universitari i Politècnic La Fe, Avenida de Fernando Abril Martorell 106, 46026 Valencia (Spain); Jiménez, M. Consuelo [Instituto de Tecnología Química UPV-CSIC/Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia (Spain); Miranda, Miguel A., E-mail: mmiranda@qim.upv.es [Instituto de Tecnología Química UPV-CSIC/Departamento de Química, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia (Spain); and others

2016-12-15

Chlorpromazine (CPZ) is an anti-psychotic drug widely used to treat disorders such as schizophrenia or manic-depression. Unfortunately, CPZ exhibits undesirable side effects such as phototoxic and photoallergic reactions in humans. In general, the influence of drug metabolism on this type of reactions has not been previously considered in photosafety testing. Thus, the present work aims to investigate the possible photo(geno)toxic potential of drug metabolites, using CPZ as an established reference compound. In this case, the metabolites selected for the study are demethylchlorpromazine (DMCPZ), didemethylchlorpromazine (DDMCPZ) and chlorpromazine sulfoxide (CPZSO). The demethylated CPZ metabolites DMCPZ and DDMCPZ maintain identical chromophore to the parent drug. In this work, it has been found that the nature of the aminoalkyl side chain modulates the hydrophobicity and the photochemical properties (for instance, the excited state lifetimes), but it does not change the photoreactivity pattern, which is characterized by reductive photodehalogenation, triggered by homolytic carbon-chlorine bond cleavage with formation of highly reactive aryl radical intermediates. Accordingly, these metabolites are phototoxic to cells, as revealed by the 3T3 NRU assay; their photo-irritation factors are even higher than that of CPZ. The same trend is observed in photogenotoxicity studies, both with isolated and with cellular DNA, where DMCPZ and DDMCPZ are more active than CPZ itself. In summary, side-chain demethylation of CPZ, as a consequence of Phase I biotransformation, does not result a photodetoxification. Instead, it leads to metabolites that exhibit in an even enhanced photo(geno)toxicity. - Highlights: • Demethylated CPZ metabolites are phototoxic to cells, as revealed by the NRU assay. • Single cell electrophoresis (Comet Assay) confirms the photodamage to cellular DNA. • DNA single strand breaks formation is observed on agarose gel electrophoresis. �

Enhanced photo(geno)toxicity of demethylated chlorpromazine metabolites

International Nuclear Information System (INIS)

Palumbo, Fabrizio; Garcia-Lainez, Guillermo; Limones-Herrero, Daniel; Coloma, M. Dolores; Escobar, Javier; Jiménez, M. Consuelo; Miranda, Miguel A.

2016-01-01

Chlorpromazine (CPZ) is an anti-psychotic drug widely used to treat disorders such as schizophrenia or manic-depression. Unfortunately, CPZ exhibits undesirable side effects such as phototoxic and photoallergic reactions in humans. In general, the influence of drug metabolism on this type of reactions has not been previously considered in photosafety testing. Thus, the present work aims to investigate the possible photo(geno)toxic potential of drug metabolites, using CPZ as an established reference compound. In this case, the metabolites selected for the study are demethylchlorpromazine (DMCPZ), didemethylchlorpromazine (DDMCPZ) and chlorpromazine sulfoxide (CPZSO). The demethylated CPZ metabolites DMCPZ and DDMCPZ maintain identical chromophore to the parent drug. In this work, it has been found that the nature of the aminoalkyl side chain modulates the hydrophobicity and the photochemical properties (for instance, the excited state lifetimes), but it does not change the photoreactivity pattern, which is characterized by reductive photodehalogenation, triggered by homolytic carbon-chlorine bond cleavage with formation of highly reactive aryl radical intermediates. Accordingly, these metabolites are phototoxic to cells, as revealed by the 3T3 NRU assay; their photo-irritation factors are even higher than that of CPZ. The same trend is observed in photogenotoxicity studies, both with isolated and with cellular DNA, where DMCPZ and DDMCPZ are more active than CPZ itself. In summary, side-chain demethylation of CPZ, as a consequence of Phase I biotransformation, does not result a photodetoxification. Instead, it leads to metabolites that exhibit in an even enhanced photo(geno)toxicity. - Highlights: • Demethylated CPZ metabolites are phototoxic to cells, as revealed by the NRU assay. • Single cell electrophoresis (Comet Assay) confirms the photodamage to cellular DNA. • DNA single strand breaks formation is observed on agarose gel electrophoresis. �

The genetic basis of DOORS syndrome : an exome-sequencing study

NARCIS (Netherlands)

Campeau, Philippe M.; Kasperaviciute, Dalia; Lu, James T.; Burrage, Lindsay C.; Kim, Choel; Hori, Mutsuki; Powell, Berkley R.; Stewart, Fiona; Felix, Temis Maria; van den Ende, Jenneke; Wisniewska, Marzena; Kayserili, Huelya; Rump, Patrick; Nampoothiri, Sheela; Aftimos, Salim; Mey, Antje; Nair, Lal D. V.; Begleiter, Michael L.; De Bie, Isabelle; Meenakshi, Girish; Murray, Mitzi L.; Repetto, Gabriela M.; Golabi, Mahin; Blair, Edward; Male, Alison; Giuliano, Fabienne; Kariminejad, Ariana; Newman, William G.; Bhaskar, Sanjeev S.; Dickerson, Jonathan E.; Kerr, Bronwyn; Banka, Siddharth; Giltay, Jacques C.; Wieczorek, Dagmar; Tostevin, Anna; Wiszniewska, Joanna; Cheung, Sau Wai; Hennekam, Raoul C.; Gibbs, Richard A.; Lee, Brendan H.; Sisodiya, Sanjay M.

Background Deafness, onychodystrophy, osteodystrophy, mental retardation, and seizures (DOORS) syndrome is a rare autosomal recessive disorder of unknown cause. We aimed to identify the genetic basis of this syndrome by sequencing most coding exons in affected individuals. Methods Through a search

Selection of stand variables in southern Maine for making volume estimates from aerial photos

Science.gov (United States)

Earl J. Rogers; Gene Avery; Roy A. Chapman

1959-01-01

Aerial photographs are used widely in forest inventories. But there is a continuing need for improving the techniques of photo interpretation and making more efficient use of photographs. When the number or intensity of sample ground plots is controlled by airphoto classifications, a reliable stratification of the timber area is a must.

Person Recognition in Social Media Photos

OpenAIRE

Oh, Seong Joon; Benenson, Rodrigo; Fritz, Mario; Schiele, Bernt

2017-01-01

People nowadays share large parts of their personal lives through social media. Being able to automatically recognise people in personal photos may greatly enhance user convenience by easing photo album organisation. For human identification task, however, traditional focus of computer vision has been face recognition and pedestrian re-identification. Person recognition in social media photos sets new challenges for computer vision, including non-cooperative subjects (e.g. backward viewpoints...

Solution for Direct Solar Impingement Problem on Landsat-7 ETM+ Cooler Door During Cooler Outgas in Flight

Science.gov (United States)

Choi, Michael K.

1999-01-01

There was a thermal anomaly of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) radiative cooler cold stage during the cooler outgas phase in flight. With the cooler door in the outgas position and the outgas heaters enabled, the cold stage temperature increased to a maximum of 323 K when the spacecraft was in the sunlight, which was warmer than the 316.3 K upper set point of the outgas heater controller on the cold stage. Also, the outgas heater cycled off when the cold stage was warming up to 323 K. A corrective action was taken before the attitude of the spacecraft was changed during the first week in flight. One orbit before the attitude was changed, the outgas heaters were disabled to cool off the cold stage. The cold stage temperature increase was strongly dependent on the spacecraft roll and yaw. It provided evidence that direct solar radiation entered the gap between the cooler door and cooler shroud. There was a concern that the direct solar radiation could cause polymerization of hydrocarbons, which could contaminate the cooler and lead to a thermal short. After outgas with the cooler door in the outgas position for seven days, the cooler door was changed to the fully open position. With the cooler door fully open, the maximum cold stage temperature was 316.3 K when the spacecraft was in the sunlight, and the duty cycle of the outgas heater in the eclipse was the same as that in the sunlight. It provided more evidence that direct solar radiation had entered the gap between the cooler door and cooler shroud. Cooler outgas continued for seven more days, with the cooler door fully open. The corrective actions had prevented overheating of the cold stage and cold focal plane array (CFPA), which could damage these two components. They also minimized the risk of contamination on the cold stage, which could lead to a thermal short.

Temperature behaviour of photo-emissive films. The case of photo-multipliers used in scintillation counters

International Nuclear Information System (INIS)

Ardalan, A.H.

1966-01-01

This work concerns the changes in the spectral sensitivity of 3 types of normal photo-cathodes (Cs 3 Sb, tri-alkali and bi-alkali without cesium) as a function of temperature. The photo-cathodes of cathodes of commercial photomultipliers (DARIO, E.M.I., R.C.A., A.S.C.O.F.) were used for these tests. The temperature range studied was -25 C to +55 C (except for the bi-alkali photo-cathodes which were tested up to +150 C) and the wave-length range was 3250 to 7000 angstrom. After a brief review of photo-electric effect theories, the experimental device is described and the measurement results presented. Finally, an interpretation of these results is proposed. For the normal range of scintillator emission, i.e. between 3000 and 5000 angstroms (Na I (Tl), plastics, anthracene) the temperature coefficient is always negative: -0.15 % C for Cs 3 Sb and up to -0.5 % C for the most temperature-sensitive photo-cathode. Above 5000 angstrom, the temperature coefficient of Cs 3 Sb films becomes positive: +0.5 % C on the overage. The accuracy of the spectral sensitivity measurements is ±4 % in absolute value and ±1 % in relative value. (author) [fr

Contribution to understanding and controlling a-Si:H thin films growth by mercury-sensitised photo-CVD

International Nuclear Information System (INIS)

Barhdadi, A.

2003-09-01

Mercury-sensitized photo-CVD technique is widely used for growing amorphous silicon thin films. This attractive method allows damage-free thin film depositions at very low substrate temperatures without the deleterious effects of the other processes. This review reports on the principle and potential of this technique. It also recalls and summarizes some fundamental issues such as experimental systems or apparatus particularities, the analysis of gas-phase reactions in the reactor, the surface-reaction model of SiH 3 and H during the film growth and all the kinetic model for lamp-induced Photo-CVD. (author)

Automatic digital photo-book making system

Science.gov (United States)

Wang, Wiley; Teo, Patrick; Muzzolini, Russ

2010-02-01

The diversity of photo products has grown more than ever before. A group of photos are not only printed individually, but also can be arranged in specific order to tell a story, such as in a photo book, a calendar or a poster collage. Similar to making a traditional scrapbook, digital photo book tools allow the user to choose a book style/theme, layouts of pages, backgrounds and the way the pictures are arranged. This process is often time consuming to users, given the number of images and the choices of layout/background combinations. In this paper, we developed a system to automatically generate photo books with only a few initial selections required. The system utilizes time stamps, color indices, orientations and other image properties to best fit pictures into a final photo book. The common way of telling a story is to lay the pictures out in chronological order. If the pictures are proximate in time, they will coincide with each other and are often logically related. The pictures are naturally clustered along a time line. Breaks between clusters can be used as a guide to separate pages or spreads, thus, pictures that are logically related can stay close on the same page or spread. When people are making a photo book, it is helpful to start with chronologically grouped images, but time alone wont be enough to complete the process. Each page is limited by the number of layouts available. Many aesthetic rules also apply, such as, emphasis of preferred pictures, consistency of local image density throughout the whole book, matching a background to the content of the images, and the variety of adjacent page layouts. We developed an algorithm to group images onto pages under the constraints of aesthetic rules. We also apply content analysis based on the color and blurriness of each picture, to match backgrounds and to adjust page layouts. Some of our aesthetic rules are fixed and given by designers. Other aesthetic rules are statistic models trained by using

Inclusie door interprofessionele samenwerking. : Resultaten van de proeftuinen van PACT.

NARCIS (Netherlands)

Doornenbal, Jeannette; Fukkink, Ruben; van Yperen, Tom; Balledux, Mariëlle; Spoelstra, Jolanda; Verseveld, Marloes

2017-01-01

Deze rapportage gaat over de resultaten van de PACT-proeftuinen waaraan in opdracht van Het Kinderopvangfonds van 2015 tot 2017 is gewerkt. PACT-proeftuinen zijn innovatieve praktijken waarin door middel van interprofessionele samenwerking tussen de kinderopvang, het basisonderwijs en de zorg wordt

The genetic basis of DOORS syndrome: an exome-sequencing study

NARCIS (Netherlands)

Campeau, Philippe M.; Kasperaviciute, Dalia; Lu, James T.; Burrage, Lindsay C.; Kim, Choel; Hori, Mutsuki; Powell, Berkley R.; Stewart, Fiona; Félix, Têmis Maria; van den Ende, Jenneke; Wisniewska, Marzena; Kayserili, Hülya; Rump, Patrick; Nampoothiri, Sheela; Aftimos, Salim; Mey, Antje; Nair, Lal D. V.; Begleiter, Michael L.; de Bie, Isabelle; Meenakshi, Girish; Murray, Mitzi L.; Repetto, Gabriela M.; Golabi, Mahin; Blair, Edward; Male, Alison; Giuliano, Fabienne; Kariminejad, Ariana; Newman, William G.; Bhaskar, Sanjeev S.; Dickerson, Jonathan E.; Kerr, Bronwyn; Banka, Siddharth; Giltay, Jacques C.; Wieczorek, Dagmar; Tostevin, Anna; Wiszniewska, Joanna; Cheung, Sau Wai; Hennekam, Raoul C.; Gibbs, Richard A.; Lee, Brendan H.; Sisodiya, Sanjay M.

2014-01-01

Deafness, onychodystrophy, osteodystrophy, mental retardation, and seizures (DOORS) syndrome is a rare autosomal recessive disorder of unknown cause. We aimed to identify the genetic basis of this syndrome by sequencing most coding exons in affected individuals. Through a search of available case

Environmental pollution by sea-going vessels. Review for 2010; Milieuvervuiling door zeeschepen. Terugblik 2010

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-12-15

This review study looks at what has happened with the recommendations of the Dutch Court of Audit report on Environmental pollution by sea-going vessels of 2001. A closer look has been taken at the promises made by the Dutch Ministers of Transport and Justice. These recommendations were related to the bottlenecks that were observed in the efforts to prevent pollution by sea-going vessels, resulting from cleaning up pollution at sea and in the prosecution of parties causing pollution. [Dutch] In dit terugblikonderzoek zijn we nagegaan wat er is gebeurd met de aanbevelingen uit het Rekenkamerrapport Milieuvervuiling door zeeschepen van 2001. We hebben gekeken hoe het staat met de toezeggingen die indertijd zijn gedaan door de ministers van Verkeer en Waterstaat (VenW) en van Justitie. Onze aanbevelingen hadden betrekking op knelpunten die wij hadden gesignaleerd bij de inspanningen ter voorkoming van vervuiling door zeeschepen, bij het opruimen van verontreinigingen op zee en bij de vervolging van de veroorzakers van vervuiling.

A library of georeferenced photos from the field

Science.gov (United States)

Xiao, Xiangming; Dorovskoy, Pavel; Biradar, Chandrashekhar; Bridge, Eli

2011-12-01

A picture is worth a thousand of words, and every day hundreds of scientists, students, and environmentally aware citizens are taking field photos to document their observations of rocks, glaciers, soils, forests, wetlands, croplands, rangelands, livestock, and birds and mammals, as well as important events such as droughts, floods, wildfires, insect emergences, and infectious disease outbreaks. Where are those field photos stored? Can they be shared in a timely fashion to support education, research, and the leisure activities of citizens across the world? What are the financial and intellectual costs if those field photos are lost or not shared? Recently, researchers at the University of Oklahoma developed and released the Global Geo-Referenced Field Photo Library (hereinafter referred to as the Field Photo Library; http://www.eomf.ou.edu/photos/), a Web-based data portal designed for researchers and educators who wish to archive and share field photos from across the world, each tagged with exact positioning data (Figure 1). The data portal has a simple user interface that allows people to upload, query, and download georeferenced field photos in the library.

Polychaete Anneliden verzameld door Het Rijksinstituut voor Biologisch Visscherijonderzoek

NARCIS (Netherlands)

Horst, R.

1920-01-01

Lepidonotus squamatus L. juv. Waarn. 134. Enkhuizerzand. 7 Febr. 1909. Zooals vroeger door mij aangetoond, is deze soort vrij gemeen in de Zuiderzee. Eunoa nodosa M. Sars. Waarn. 16. 55° 40' N.Br., 0° 50' W.L. 8 Maart 1914. Harmothoë (Evarne) impar (Johnst.). Waarn. 69. Molengat. 16 Oct. 1913. De

Inflatable door seals - reduced maintenance and longer service-life

International Nuclear Information System (INIS)

Kuran, S.; Wensel, R.; Lazic, M.

1995-01-01

Inflatable door seals, designed more than a quarter of a century ago, have given good service in Canadian and overseas CANDU reactors. These thin-walled elastomeric seals have been exposed to many thousands of cycles of inflation and deflation, various types of aging (temperature, radiation and time), ozone degradation, abrasion, pinching, stiction, cracking and installation damage. The fact that they have operated successfully as part of the reactor building containment structure - subjected to the same pressures and temperatures as those for the thick reinforced concrete walls and steel doors highlights the achievement of these thin rubber seals. However, in the last decade, the rubber industry has developed new compounds that are more resistant to radiation, temperature, and time-dependent aging. Components manufactured from such compounds are less prone to hardening, stress cracking and permanent set; thereby saving on replacement costs, inventory and overall maintenance. This paper discusses development and testing of recent material and design changes to inflatable seals, and addresses various practical issues faced by the operations engineers and maintainers using these seals. (author)

Barcode van DNA. Democratisering van de taxonomie door digitaal identificatiesysteem

NARCIS (Netherlands)

Bakker, F.T.

2011-01-01

Het herkennen van biologische soorten aan de hand van een gestandaardiseerde DNA-barcode heeft de laatste tijd een enorme vlucht genomen. Gedreven door aan de ene kant de biodiversiteitscrises en de mogelijke global change, en aan de andere kant zowel razendsnelle technologische vooruitgang als ook

Financiële verslaggeving door het Rijk vergeleken met IPSAS

NARCIS (Netherlands)

van Schaik, F.

2014-01-01

De Europese Commissie bereidt plannen voor om de financiële verslaggeving door de overheden van de lidstaten te harmoniseren met als doel een verbetering van transparantie en vergelijkbaarheid. De Europese schuldencrisis heeft duidelijk gemaakt dat de jaarrekeningen van de overheden van de lidstaten

Design of the shield door and transporter for the Culham Conceptual Tokamak Reactor Mark II

International Nuclear Information System (INIS)

Guthrie, J.A.S.

1980-04-01

In the Culham Conceptual Tokamak Reactor MK II access to the interior for blanket maintenance is through large openings in the fixed shield structure closed by removable shield doors when the reactor is operational. This report describes the design of the 200 tonne doors and the associated special-purpose remote operating transporter manipulator. The design, which has not been optimised, generally uses available commercial equipment and state-of-the-art techniques. (U.K.)

High formation of secondary organic aerosol from the photo-oxidation of toluene

OpenAIRE

L. Hildebrandt; N. M. Donahue; S. N. Pandis

2009-01-01

Toluene and other aromatics have long been viewed as the dominant anthropogenic secondary organic aerosol (SOA) precursors, but the SOA mass yields from toluene reported in previous studies vary widely. Experiments conducted in the Carnegie Mellon University environmental chamber to study SOA formation from the photo-oxidation of toluene show significantly larger SOA production than parameterizations employed in current air-quality models. Aerosol mass yields depend on experimental co...

BVA members wow judges in photo competition.

Science.gov (United States)

2016-09-03

Earlier this year, BVA ran its inaugural photo competition, giving members the opportunity to showcase the work of the veterinary profession and the animals and wildlife they encounter. Standing out from over 400 high-quality entries, judges picked the images reproduced in this month's BVA News as the winning and highly commended photos. To see all the entries and hear from the winners, visit www.bva.co.uk/vet-photos-2016/. There will be another photo competition in 2017 with more categories to be announced. British Veterinary Association.

Photo-Induced Micellization of Block Copolymers

Directory of Open Access Journals (Sweden)

Satoshi Kuwayama

2010-11-01

Full Text Available We found novel photo-induced micellizations through photolysis, photoelectron transfer, and photo-Claisen rearrangement. The photolysis-induced micellization was attained using poly(4-tert-butoxystyrene-block-polystyrene diblock copolymer (PBSt-b-PSt. BSt-b-PSt showed no self-assembly in dichloromethane and existed as isolated copolymers. Dynamic light scattering demonstrated that the copolymer produced spherical micelles in this solvent due to irradiation with a high-pressure mercury lamp in the presence of photo-acid generators, such as bis(alkylphenyliodonium hexafluorophosphate, diphenyliodonium hexafluorophosphate, and triphenylsulfonium triflate. The 1H NMR analysis confirmed that PBSt-b-PSt was converted into poly(4-vinylphenol-block-PSt by the irradiation, resulting in self-assembly into micelles. The irradiation in the presence of the photo-acid generator also induced the micellization of poly(4-pyridinemethoxymethylstyrene-block-polystyrene diblock copolymer (PPySt-b-PSt. Micellization occurred by electron transfer from the pyridine to the photo-acid generator in their excited states and provided monodispersed spherical micelles with cores of PPySt blocks. Further, the photo-Claisen rearrangement caused the micellization of poly(4-allyloxystyrene-block-polystyrene diblock copolymer (PASt-b-PSt. Micellization was promoted in cyclohexane at room temperature without a catalyst. During micellization, the elimination of the allyl groups competitively occurred along with the photorearrangement of the 4-allyloxystyrene units into the 3-allyl-4-hydroxystyrene units.

A fast photo-counter with multi-level buffers

International Nuclear Information System (INIS)

Peng Hu; Zhou Peiling; Yao Kun; Guo Guangcan

1992-01-01

Digital Photon Correlator (DPC) is composed of a Photo-counter and a data processing unit. The performance of Photo-counter in data acquisition system has a direct influence on data processing. The Photo-counter with fast carry designed here has multi-level buffers. Photon pulses can be correctly and dynamically recorded by the Photo-counter and processed by a single chip computer

Radiation shielding techniques and applications. 3. Analysis of Photon Streaming Through and Around Shield Doors

International Nuclear Information System (INIS)

Barnett, Marvin; Hack, Joe; Nathan, Steve; White, Travis

2001-01-01

Westinghouse Safety Management Solutions (Westinghouse SMS) has been tasked with providing radiological engineering design support for the new Commercial Light Water Reactor Tritium Extraction Facility (CLWR-TEF) being constructed at the Savannah River Site (SRS). The Remote Handling Building (RHB) of the CLWR-TEF will act as the receiving facility for irradiated targets used in the production of tritium for the U.S. Department of Energy (DOE). Because of the high dose rates, approaching 50 000 rads/h (500 Gy/h) from the irradiated target bundles, significant attention has been made to shielding structures within the facility. One aspect of the design that has undergone intense review is the shield doors. The RHB has six shield doors that needed to be studied with respect to photon streaming. Several aspects had to be examined to ensure that the design meets the radiation dose levels. Both the thickness and streaming issues around the door edges were designed and examined. Photon streaming through and around a shield door is a complicated problem, creating a reliance on computer modeling to perform the analyses. The computer code typically used by the Westinghouse SMS in the evaluation of photon transport through complex geometries is the MCNP Monte Carlo computer code. The complexity of the geometry within the problem can cause problems even with the Monte Carlo codes. Striking a balance between how the code handles transport through the shield door with transport through the streaming paths, particularly with the use of typical variance reduction methods, is difficult when trying to ensure that all important regions of the model are sampled appropriately. The thickness determination used a simple variance reduction technique. In construction, the shield door will not be flush against the wall, so a solid rectangular slab leaves streaming paths around the edges. Administrative controls could be used to control dose to workers; however, 10 CFR 835.1001 states

[Three dimensional finite element model of a modified posterior cervical single open-door laminoplasty].

Science.gov (United States)

Wang, Q; Yang, Y; Fei, Q; Li, D; Li, J J; Meng, H; Su, N; Fan, Z H; Wang, B Q

2017-06-06

Objective: To build a three-dimensional finite element models of a modified posterior cervical single open-door laminoplasty with short-segmental lateral mass screws fusion. Methods: The C(2)-C(7) segmental data were obtained from computed tomography (CT) scans of a male patient with cervical spondylotic myelopathy and spinal stenosis.Three-dimensional finite element models of a modified cervical single open-door laminoplasty (before and after surgery) were constructed by the combination of software package MIMICS, Geomagic and ABAQUS.The models were composed of bony vertebrae, articulating facets, intervertebral disc and associated ligaments.The loads of moments 1.5Nm at different directions (flexion, extension, lateral bending and axial rotation)were applied at preoperative model to calculate intersegmental ranges of motion.The results were compared with the previous studies to verify the validation of the models. Results: Three-dimensional finite element models of the modified cervical single open- door laminoplasty had 102258 elements (preoperative model) and 161 892 elements (postoperative model) respectively, including C(2-7) six bony vertebraes, C(2-3)-C(6-7) five intervertebral disc, main ligaments and lateral mass screws.The intersegmental responses at the preoperative model under the loads of moments 1.5 Nm at different directions were similar to the previous published data. Conclusion: Three-dimensional finite element models of the modified cervical single open- door laminoplasty were successfully established and had a good biological fidelity, which can be used for further study.

All new custom path photo book creation

Science.gov (United States)

Wang, Wiley; Muzzolini, Russ

2012-03-01

In this paper, we present an all new custom path to allow consumers to have full control to their photos and the format of their books, while providing them with guidance to make their creation fast and easy. The users can choose to fully automate the initial creation, and then customize every page. The system manage many design themes along with numerous design elements, such as layouts, backgrounds, embellishments and pattern bands. The users can also utilize photos from multiple sources including their computers, Shutterfly accounts, Shutterfly Share sites and Facebook. The users can also use a photo as background, add, move and resize photos and text - putting what they want where they want instead of being confined to templates. The new path allows users to add embellishments anywhere in the book, and the high-performance platform can support up to 1,000 photos per book and up to 25 pictures per page. The path offers either Smart Autofill or Storyboard features allowing customers to populate their books with photos so they can add captions and customize the pages.

Zika-Virus-Related Photo Sharing on Pinterest and Instagram.

Science.gov (United States)

Fung, Isaac Chun-Hai; Blankenship, Elizabeth B; Goff, M Elizabeth; Mullican, Lindsay A; Chan, Kwun Cheung; Saroha, Nitin; Duke, Carmen H; Eremeeva, Marina E; Fu, King-Wa; Tse, Zion Tsz Ho

2017-12-01

Pinterest (San Francisco, CA) and Instagram (Menlo Park, CA) are 2 popular photo-sharing social media platforms among young individuals. We assessed differences between Instagram and Pinterest in relaying photographic information regarding Zika virus. Specifically, we investigated whether the percentage of Zika-virus-related photos with Spanish or Portuguese texts embedded therein was higher for Instagram than for Pinterest and whether the contents of Zika-virus-related photos shared on Pinterest were different from those shared on Instagram. We retrieved and manually coded 616 Pinterest (key words: "zika" AND "virus") and 616 Instagram (hashtag: #zikavirus) photos. Among the manually coded samples, 47% (290/616) of Pinterest photos and 23% (144/616) of Instagram photos were relevant to Zika virus. Words were embedded in 57% (164/290) of relevant Pinterest photos and all 144 relevant Instagram photos. Among the photos with embedded words, photos in Spanish or Portuguese were more prevalent on Instagram (77/144, 53%) than on Pinterest (14/164, 9%). There were more Zika-virus-related photos on Instagram than on Pinterest pertinent to Zika virus prevention (59/144, 41%, versus 41/290, 14%; PInstagram are similar platforms for Zika virus prevention communication. (Disaster Med Public Health Preparedness. 2017;11:656-659).

Participatory Surveillance and Photo Sharing Practices

DEFF Research Database (Denmark)

Albrechtslund, Anders; Damkjaer, Maja Sonne; Bøge, Ask Risom

2019-01-01

-material perspective on photo-sharing practices. Information, Communication & Society, 19(4), 475–488. Sontag, S. (1977). On Photography. Picador. Steeves, V., & Jones, O. (2010). Editorial: Surveillance, Children and Childhood. Surveillance & Society, 7(3/4), 187–191....... that parents do not generally plan to store or organize their photos, and even less their children’s photos. This seems to indicate a shift from a pre-digital perception of photos as objects to be packaged, accumulated, framed etc. which can age and disappear (see Sontag, 1977) to something perceived less....... References: Albrechtslund, A. (2008). Online Social Networking as Participatory Surveillance. First Monday, 13(3). Fotel, T., & Thomsen, T. U. (2002). The Surveillance of Children’s Mobility. Surveillance & Society, 1(4), 535-554. Lobinger, K. (2016). Photographs as things–photographs of things. A texto...

30 CFR 57.8531 - Construction and maintenance of ventilation doors.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Construction and maintenance of ventilation... NONMETAL MINES Ventilation Underground Only § 57.8531 Construction and maintenance of ventilation doors... constructed of wood; (c) Maintained in good condition; (d) Self-closing, if manually operated; and (e...

Door and window image-based measurement using a mobile device

Science.gov (United States)

Ma, Guangyao; Janakaraj, Manishankar; Agam, Gady

2015-03-01

We present a system for door and window image-based measurement using an Android mobile device. In this system a user takes an image of a door or window that needs to be measured and using interaction measures specific dimensions of the object. The existing object is removed from the image and a 3D model of a replacement is rendered onto the image. The visualization provides a 3D model with which the user can interact. When tested on a mobile Android platform with an 8MP camera we obtain an average measurement error of roughly 0.5%. This error rate is stable across a range of view angles, distances from the object, and image resolutions. The main advantages of our mobile device application for image measurement include measuring objects for which physical access is not readily available, documenting in a precise manner the locations in the scene where the measurements were taken, and visualizing a new object with custom selections inside the original view.

Five-year experience with burns from glass fireplace doors in the pediatric population.

Science.gov (United States)

Baryza, Mary Jo; Hinson, Michelle; Conway, Jennifer; Ryan, Colleen M

2013-01-01

Burns from contact with glass doors of gas fireplaces have been previously reported. The purpose of this study is to examine the incidence and severity of this injury in our population. Patients were identified for inclusion in the retrospective chart review study using the National Trauma Registry of the American College of Surgeons (NTRACS) and our local outpatient database. Criteria for inclusion were burn injuries sustained from contact with fireplace glass doors treated at our pediatric burn center from 2007 through 2011. Fifty children met these criteria, including two children whose burns were caused by electric fireplace glass doors. BSA burned was 1.5 ± 1.5% (mean ± SD), range 0.5 to 10%. Age was 27.2 ± 27.3 months, range 8 months to 13 years. Forty-five children (90%) had hand burns; of these, 18 children had bilateral hand involvement. Facial burns were found in three children (6%), and eight children (16%) had other areas burned. One patient developed cellulitis. Two patients required surgery. Six children (12%) required hospitalization; mean length of stay was 5.8 ± 5 days, range 1 to 5 days. Although the number of inpatient admissions was relatively few, 329 outpatient visits and 309 rehabilitation visits were required for treatment of these children. Nineteen patients (38%) required splints and six patients (12%) required scar treatment with pressure garments. Burns from contact with fireplace glass doors are a recurring problem. Toddlers are most at risk. Directed preventive strategies including parent education, safety warnings, and design modifications such as temperature sensors and barrier screens could be potentially helpful in reducing the incidence of this injury.

Door-to-needle time for administration of fibrinolytics in acute ...

African Journals Online (AJOL)

Objectives. To determine the current door-to-needle time for the administration of fibrinolytics for acute myocardial infarction (AMI) in emergency centres (ECs) at three hospitals in Cape Town, and to compare it with the American Heart Association/American College of Cardiology (AHA/ACC) recommendation of 30 minutes ...

Door de ogen van de ander kijken: kunst als veranderkracht

NARCIS (Netherlands)

Smilde, Rineke

2015-01-01

Presentie gehouden bij een besloten expert meeting van de KNAW en de Boekmanstichting in Amsterdam. Door de ogen van de ander kijken: kunst als veranderkracht. Ik maak graag van de gelegenheid gebruik om iets te vertellen vanuit mijn werk als lector aan het PCC van de Hanzehogeschool Groningen.

Identity verification using computer vision for automatic garage door opening

NARCIS (Netherlands)

Wijnhoven, R.G.J.; With, de P.H.N.

2011-01-01

We present a novel system for automatic identification of vehicles as part of an intelligent access control system for a garage entrance. Using a camera in the door, cars are detected and matched to the database of authenticated cars. Once a car is detected, License Plate Recognition (LPR) is

Photo-dynamics of the lyophilized photo-activated adenylate cyclase NgPAC2 from the amoeboflagellate Naegleria gruberi NEG-M strain

Energy Technology Data Exchange (ETDEWEB)

Penzkofer, A., E-mail: alfons.penzkofer@physik.uni-regensburg.de [Fakultät für Physik, Universität Regensburg, Universitätsstrasse 31, D-93053 Regensburg (Germany); Tanwar, M.; Veetil, S.K.; Kateriya, S. [Department of Biochemistry, University of Delhi South Campus, Benito Juarez Road, New Delhi 110021 (India); Stierl, M.; Hegemann, P. [Institut für Biologie/Experimentelle Biophysik, Humboldt Universität zu Berlin, Invalidenstrasse 42, D-10115 Berlin (Germany)

2013-09-23

Highlights: • Lyophilizing of NgPAC2 from Naegleria gruberi caused loss of BLUF domain activity. • Photo-induced tyrosine to flavin electron transfer in lyophilized NgPAC2. • Photo-induced Tyr–Tyr cross-linking to o,o′-dityrosine in lyophilized NgPAC2. • Photo-induced partial flavin cofactor reduction in lyophilized NgPAC2. • Two NgPAC2 conformations with fast and slow photo-induced electron transfer. - Abstract: The absorption and emission spectroscopic behavior of lyophilized photo-activated adenylate cyclase NgPAC2 from the amoeboflagellate Naegleria gruberi NEG-M strain consisting of a BLUF domain (BLUF = Blue Light sensor Using Flavin) and a cyclase homology domain was studied in the dark, during blue-light exposure and after blue-light exposure at a temperature of 4 °C. The BLUF domain photo-cycle dynamics observed for snap-frozen NgPAC2 was lost by lyophilization (no signaling state formation with flavin absorption red-shift). Instead, blue-light photo-excitation of lyophilized NgPAC2 caused sterically restricted Tyr–Tyr cross-linking (o,o′-ditysosine formation) and partial flavin cofactor reduction.

Photo-dynamics of the lyophilized photo-activated adenylate cyclase NgPAC2 from the amoeboflagellate Naegleria gruberi NEG-M strain

International Nuclear Information System (INIS)

Penzkofer, A.; Tanwar, M.; Veetil, S.K.; Kateriya, S.; Stierl, M.; Hegemann, P.

2013-01-01

Highlights: • Lyophilizing of NgPAC2 from Naegleria gruberi caused loss of BLUF domain activity. • Photo-induced tyrosine to flavin electron transfer in lyophilized NgPAC2. • Photo-induced Tyr–Tyr cross-linking to o,o′-dityrosine in lyophilized NgPAC2. • Photo-induced partial flavin cofactor reduction in lyophilized NgPAC2. • Two NgPAC2 conformations with fast and slow photo-induced electron transfer. - Abstract: The absorption and emission spectroscopic behavior of lyophilized photo-activated adenylate cyclase NgPAC2 from the amoeboflagellate Naegleria gruberi NEG-M strain consisting of a BLUF domain (BLUF = Blue Light sensor Using Flavin) and a cyclase homology domain was studied in the dark, during blue-light exposure and after blue-light exposure at a temperature of 4 °C. The BLUF domain photo-cycle dynamics observed for snap-frozen NgPAC2 was lost by lyophilization (no signaling state formation with flavin absorption red-shift). Instead, blue-light photo-excitation of lyophilized NgPAC2 caused sterically restricted Tyr–Tyr cross-linking (o,o′-ditysosine formation) and partial flavin cofactor reduction

Electron cyclotron resonance plasma photos

Energy Technology Data Exchange (ETDEWEB)

Racz, R.; Palinkas, J. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary); University of Debrecen, H-4010 Debrecen, Egyetem ter 1 (Hungary); Biri, S. [Institute of Nuclear Research (ATOMKI), H-4026 Debrecen, Bem ter 18/c (Hungary)

2010-02-15

In order to observe and study systematically the plasma of electron cyclotron resonance (ECR) ion sources (ECRIS) we made a high number of high-resolution visible light plasma photos and movies in the ATOMKI ECRIS Laboratory. This required building the ECR ion source into an open ECR plasma device, temporarily. An 8MP digital camera was used to record photos of plasmas made from Ne, Ar, and Kr gases and from their mixtures. We studied and recorded the effect of ion source setting parameters (gas pressure, gas composition, magnetic field, and microwave power) to the shape, color, and structure of the plasma. The analysis of the photo series gave us many qualitative and numerous valuable physical information on the nature of ECR plasmas.

Electron cyclotron resonance plasma photos

International Nuclear Information System (INIS)

Racz, R.; Palinkas, J.; Biri, S.

2010-01-01

In order to observe and study systematically the plasma of electron cyclotron resonance (ECR) ion sources (ECRIS) we made a high number of high-resolution visible light plasma photos and movies in the ATOMKI ECRIS Laboratory. This required building the ECR ion source into an open ECR plasma device, temporarily. An 8MP digital camera was used to record photos of plasmas made from Ne, Ar, and Kr gases and from their mixtures. We studied and recorded the effect of ion source setting parameters (gas pressure, gas composition, magnetic field, and microwave power) to the shape, color, and structure of the plasma. The analysis of the photo series gave us many qualitative and numerous valuable physical information on the nature of ECR plasmas.

Problems of photo-radiative action

International Nuclear Information System (INIS)

Milinchuk, V.K.

1985-01-01

The most interesting photo-radiation effects observed in the last few years are discussed, in particular, considerable reduction ip material radiation resistance under the combined effect of ionizing and visible radiation. Intermediate active particles are shown to absorb the light according to the mechanism of ''direct'' absorption and as a result of photo-sensibilization reactions as well. Channels of absorbed light energy dissipation depend on the nature and structure of the intermediate active particles, temperature, light radiation frequency and other parameters. Problems are considered which solution promotes further development of photo-radiation chemistry and that are important for such branches of modern physical chemistry as kinetics and mechanism of elementary processes in organic solids, radiation resistance and ageing of organic polymers

NEFSC Photo Gallery

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Photos of fish, marine mammals, turtles, ships, and other related subjects for use by students, educators, scientists, media, etc.

Content-aware photo collage using circle packing.

Science.gov (United States)

Yu, Zongqiao; Lu, Lin; Guo, Yanwen; Fan, Rongfei; Liu, Mingming; Wang, Wenping

2014-02-01

In this paper, we present a novel approach for automatically creating the photo collage that assembles the interest regions of a given group of images naturally. Previous methods on photo collage are generally built upon a well-defined optimization framework, which computes all the geometric parameters and layer indices for input photos on the given canvas by optimizing a unified objective function. The complex nonlinear form of optimization function limits their scalability and efficiency. From the geometric point of view, we recast the generation of collage as a region partition problem such that each image is displayed in its corresponding region partitioned from the canvas. The core of this is an efficient power-diagram-based circle packing algorithm that arranges a series of circles assigned to input photos compactly in the given canvas. To favor important photos, the circles are associated with image importances determined by an image ranking process. A heuristic search process is developed to ensure that salient information of each photo is displayed in the polygonal area resulting from circle packing. With our new formulation, each factor influencing the state of a photo is optimized in an independent stage, and computation of the optimal states for neighboring photos are completely decoupled. This improves the scalability of collage results and ensures their diversity. We also devise a saliency-based image fusion scheme to generate seamless compositive collage. Our approach can generate the collages on nonrectangular canvases and supports interactive collage that allows the user to refine collage results according to his/her personal preferences. We conduct extensive experiments and show the superiority of our algorithm by comparing against previous methods.

Effectieve kolonisatie van aardappelplanten door Dickeya-soorten (Erwinia chrysanthemi) : themanummer fytobacteriologie

NARCIS (Netherlands)

Wolf, van der J.M.; Czajkowski, R.L.; Velvis, H.

2009-01-01

De bacterieziekten zwartbenigheid en stengelnatrot, veroorzaakt door Pectobacterium en Dickeya (Erwinia)- soorten, berokkenen grote schade aan de pootaardappelteelt. Bij PRI en HZPC wordt onderzoek verricht naar de verspreiding van deze pathogenen tijdens teelt- en (na)oogst. Het was al bekend dat

30 CFR 77.303 - Hot gas inlet chamber dropout doors.

Science.gov (United States)

2010-07-01

... Section 77.303 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND... employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...

30 CFR 57.22205 - Doors on main fans (I-A, II-A, III, and V-A mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Doors on main fans (I-A, II-A, III, and V-A... main fans (I-A, II-A, III, and V-A mines). In mines ventilated by multiple main fans, each main fan... reversal through the fan. The doors shall be located so that they are not in direct line with explosive...

Kinetic study of photo-grafting and photo-cross-linking of a cis-poly butadiene onto cellulose from asymmetric membranes

International Nuclear Information System (INIS)

Zeni, M.; Riveros, R.; Schildt, R.

1991-01-01

Photochemical grafting onto cellulose and successive photo cross-linking of 2,00-12,00 mg.cm -2 of a cys-poly butadiene, containing 80% cis groups, were investigated kinetically at 30 0 C in the presence of 1,2-diphenyl-2,2-dimethoxy ethanone as a photo initiator to polymer varied between 0,070 and 1,115. Irradiations were carried out poly chromatically, in air or under a stream of nitrogen, with incident radiation of flux I of 2,1.10 -8 einstein.s -1 .cm -2 . In light of this information, the mechanism of photo-grafting and photo-cross linking of cis-poly-butadiene on cellulose surface is discussed. (author)

ANALISA KEKUATAN KONSTRUKSI SIDE RAMP DOOR SISTEM STEEL WIRE ROPE PADA KM. DHARMA KENCANA II AKIBAT BEBAN STATIS DENGAN METODE ELEMEN HINGGA

Directory of Open Access Journals (Sweden)

Imam Pujo Mulyatno

2012-04-01

Full Text Available KM. DHARMA KENCANA II adalah kapal tipe Ro - Ro (Passanger Ship yang memiliki rute pelayaran Surabaya - Kumai - Semarang yang mampu mengangkut penumpang dan kendaraan dalam jumlah yang relatif banyak. Untuk memudahkan akses keluar masuk kendaraan yang akan diangkut, maka kapal ini dilengkapi dengan empat buah ramp door sistem steel wire rope, salah satunya adalah ramp door yang terletak dibagian kiri lambung kapal (side ramp door. Side ramp door akan menerima beban statis secara berulang - ulang sehingga dapat mengakibatkan deformasi, keretakan, kerusakan, dll. Penelitian tentang kekuatan konstruksi side ramp door perlu diperhatikan dan dilakukan dimana tegangan yang diakibatkan oleh beban yang mengenainya tidak boleh melebihi batas maksimum σyield bahan dan σijin berdasarkan rules dari klas, adapun acuan rules yang dipakai dalam penelitian ini adalah berdasarkan rules Biro Klasifikasi Indonesia. Analisa kekuatan konstruksi side ramp door dilakukan dengan menggunakan program berbasis FEM sedangkan untuk pemodelan dilakukan dengan menggunakan program berbasis CAD. Analisa yang digunakan adalah analisa beban statis untuk mengetahui karakteristik dan letak tegangan terbesar pada konstruksi side ramp door berdasarkan empat variasi pembebanan. Hasil analisa menggunakan program berbasis FEM didapatkan hasil maximum stress terbesar terjadi pada kondisi side ramp door dengan beban kendaraan truck yaitu sebesar 93,91 N/mm2 dimana daerah paling kritis terjadi pada node 22097 yang terletak pada gading nomor 8 bagian memanjang dan gading nomor 1 bagian melintang. Tegangan ini masih dalam kondisi aman karena setelah dibandingan dengan σyield bahan sebesar 400 N/mm2 dan σijin berdasarkan rules BKI sebesar 225,24 N/mm2 menghasilkan nilai safety factor sebesar 3,87 dan 2,18.

Deuteron photo-disintegration at large energies

International Nuclear Information System (INIS)

Potterveld, D.H.

1994-01-01

Current proposals at CEBAF include the measurement of cross sections and polarization observables of exclusive photo-reactions such as deuteron photo-disintegration and pion photo-production from nucleons. At issue is the applicability of traditional meson-exchange models versus quark models of these reactions at photon energies of several GeV. Beam energies above 4 GeV at CEBAF could make possible the measurement of these reactions over a kinematic range sufficiently broad to distinguish between the models. Estimates of counting rates for a Hall-C experiment to measure the γd → pn cross section are presented

Looking for the WIMP next door

Science.gov (United States)

Evans, Jared A.; Gori, Stefania; Shelton, Jessie

2018-02-01

We comprehensively study experimental constraints and prospects for a class of minimal hidden sector dark matter (DM) models, highlighting how the cosmological history of these models informs the experimental signals. We study simple `secluded' models, where the DM freezes out into unstable dark mediator states, and consider the minimal cosmic history of this dark sector, where coupling of the dark mediator to the SM was sufficient to keep the two sectors in thermal equilibrium at early times. In the well-motivated case where the dark mediators couple to the Standard Model (SM) via renormalizable interactions, the requirement of thermal equilibrium provides a minimal, UV-insensitive, and predictive cosmology for hidden sector dark matter. We call DM that freezes out of a dark radiation bath in thermal equilibrium with the SM a WIMP next door, and demonstrate that the parameter space for such WIMPs next door is sharply defined, bounded, and in large part potentially accessible. This parameter space, and the corresponding signals, depend on the leading interaction between the SM and the dark mediator; we establish it for both Higgs and vector portal interactions. In particular, there is a cosmological lower bound on the portal coupling strength necessary to thermalize the two sectors in the early universe. We determine this thermalization floor as a function of equilibration temperature for the first time. We demonstrate that direct detection experiments are currently probing this cosmological lower bound in some regions of parameter space, while indirect detection signals and terrestrial searches for the mediator cut further into the viable parameter space. We present regions of interest for both direct detection and dark mediator searches, including motivated parameter space for the direct detection of sub-GeV DM.

Significant change in the construction of a door to a room with slowed down neutron field by means of commonly used inexpensive protective materials

International Nuclear Information System (INIS)

Konefal, Adam; Laciak, Marcin; Dawidowska, Anna; Osewski, Wojciech

2014-01-01

The detailed analysis of nuclear reactions occurring in materials of the door is presented for the typical construction of an entrance door to a room with a slowed down neutron field. The changes in the construction of the door were determined to reduce effectively the level of neutron and gamma radiation in the vicinity of the door in a room adjoining the neutron field room. Optimisation of the door construction was performed with the use of Monte Carlo calculations (GEANT4). The construction proposed in this paper bases on the commonly used inexpensive protective materials such as borax (13.4 cm), lead (4 cm) and stainless steel (0.1 and 0.5 cm on the side of the neutron field room and of the adjoining room, respectively). The improved construction of the door, worked out in the presented studies, can be an effective protection against neutrons with energies up to 1 MeV (authors)

Utilization of GSM Module (Sim 900 Based Arduino-Uno for Alarm System and Remote Automatic Door Locking

Directory of Open Access Journals (Sweden)

Fauzi Fauzi

2018-01-01

Full Text Available Sebuah sistem alarm dan pengunci pintu otomatis jarak jauh untuk keamanan rumah telah dibuat. Otomatisasi kunci pintu rumah ini beroperasi dengan menggunakan perintah yang dikirimkan oleh pemilik rumah melalui pesan singkat melalui handphone sehingga keamanan rumah akan tetap dapat dikendalikan meski dari jarak yang jauh. Penelitian ini bertujuan untuk membangun otomatisasi rumah pintar yang mampu melakukan dua hal yakni mengunci pintu dan menyalakan alarm dengan menggunakan mikrokontroler Arduino-uno dan modul GSM. Pengontrolan secara otomatis tersebut cukup kompleks dan memerlukan berbagai komponen yang terintegrasi dengan kemampuan pembacaan masukan, pemrosesan data dan pengontrolan keluaran secara bersamaan dan terprogram.  A remote door automatic alarm and door lock system for home security has been designed. This home door lock automation operates using commands sent by homeowners via short messages from handphone so that home security will remain controllable even from a long distance. This study aims to build smart home automation that can do two things: lock the door and turn on the alarm by using Arduino-uno microcontroller and GSM module. The automatic control is quite complex and requires a variety of integrated components with the ability to read input, data processing and control the output simultaneously and programmed.   Keywords: Arduino, GSM, Automatic Doors, SMS Rerefences Depari, G.S. (1985. Belajar Teori dan Keterampilan Elektronika. Bandung: Armico Daryanto, 2005. Pengetahuan Teknik Elektronika. Erlangga. Jakarta. Session, Kendall Webster, 2003. 1001 Rangkaian Elektronika. PT. Elek Media Komputindo Kelompok Gramedia, Jakarta. Sustrisno, 1986, Elektronika Teori dan penerapanya. Penerbit ITB, Bandung

Ruimte in regels: 10 succesvolle voorbeelden op wet en regelgeving binnen ruimtelijke ordening voor multifunctionele landbouw voor en door gemeenten

NARCIS (Netherlands)

Schoorlemmer, H.B.; Waal, van der B.H.C.; Oppedijk van Veen, J.; Migchels, G.; Mul, M.F.

2007-01-01

Deze VNG brochure geeft een overzicht van 10 succesvolle voorbeelden op wet en regelgeving binnen ruimtelijke ordening voor multifunctionele landbouw voor en door gemeenten. Van traditionele bestemmingsplannen naar een nieuw, ontwikkelingsgericht beleid. De brochure is samengesteld door PPO

Development of a Thin-Wall Magnesium side door Inner Panel for Automobiles

Energy Technology Data Exchange (ETDEWEB)

Jekl, J.; Auld, J.; Sweet, C.; Carter, Jon; Resch, Steve; Klarner, A.; Brevick, J.; Luo, A.

2015-05-17

Cast magnesium side door inner panels can provide a good combination of weight, functional, manufacturing and economical requirements. However, several challenges exist including casting technology for thin-wall part design, multi-material incompatibility and relatively low strength vs steel. A project has been initiated, supported by the US Department of Energy, to design and develop a lightweight frame-under-glass door having a thin-wall, full die-cast, magnesium inner panel. This development project is the first of its kind within North America. Phase I of the project is now complete and the 2.0mm magnesium design, through casting process enablers, has met or exceeded all stiffness requirements, with significant mass reduction and part consolidation. In addition, a corrosion mitigation strategy has been established using industry-accepted galvanic isolation methods and coating technologies.

Quality of life in symptomatic cervical myelopathy after open-door laminoplasty

Directory of Open Access Journals (Sweden)

Rodrigo Yuiti Nakao

2015-06-01

Full Text Available OBJECTIVE: To analyze the results obtained by open-door laminoplasty using the Newbridge(r/Blackstone plate, in cases of myelopathy associated with cervical lordosis.METHODS: From December 2010 to October 2012, eight patients between the ages of 49 and 68 underwent open-door laminoplasty with the use of the Newbridge(r fixation system for maintenance and stabilization of the cervical laminoplasty. Minimum follow-up was four months. For the evaluation of quality of life the questionnaire SF-36 was applied at the following times: preoperative, one month and three months after surgery associated with the subjective assessment of the patient regarding satisfaction with the procedure and with the Nurick neurological scale applied prior to surgery and three months later.RESULTS: According to the SF-36, there was significant improvement in the domains functional ability, general health perceptions and emotional aspects over time; regarding physical limitations and social aspects there was no improvement in the first postoperative month, only in the third month. There were no statistically significant changes observed during the period covered by this study related to pain, vitality and mental health. According to Nurick scale, there was evidence of improvement in symptoms of cervical myelopathy. Based on the subjective evaluation of the patients, surprisingly, all patients were satisfied with the surgical procedure and the results.CONCLUSION: The open-door laminoplasty technique with rigid fixation to maintain the opening is useful in improving the symptoms of cervical myelopathy associated with lordosis, leading to improved quality of life and with a high degree of patient satisfaction and fewer complications.

Elongational viscosity of photo-oxidated LDPE

Science.gov (United States)

Rolón-Garrido, Víctor H.; Wagner, Manfred H.

2014-05-01

Sheets of low-density polyethylene (LDPE) were photo-oxidatively treated at room temperature, and subsequently characterized rheologically in the melt state by shear and uniaxial extensional experiments. For photo-oxidation, a xenon lamp was used to irradiate the samples for times between 1 day and 6 weeks. Linear-viscoelastic characterization was performed in a temperature range of 130 to 220°C to obtain the master curve at 170°C, the reference temperature at which the elongational viscosities were measured. Linear viscoelasticity is increasingly affected by increasing photo-oxidation due to crosslinking of LDPE, as corroborated by an increasing gel fraction as determined by a solvent extraction method. The elongational measurements reveal a strong enhancement of strain hardening until a saturation level is achieved. The elongational data are analyzed in the frame work of two constitutive equations, the rubber-like liquid and the molecular stress function models. Within the experimental window, timedeformation separability is confirmed for all samples, independent of the degree of photo-oxidation.

Large patternable metal nanoparticle sheets by photo/e-beam lithography

Science.gov (United States)

Saito, Noboru; Wang, Pangpang; Okamoto, Koichi; Ryuzaki, Sou; Tamada, Kaoru

2017-10-01

Techniques for micro/nano-scale patterning of large metal nanoparticle sheets can potentially be used to realize high-performance photoelectronic devices because the sheets provide greatly enhanced electrical fields around the nanoparticles due to localized surface plasmon resonances. However, no single metal nanoparticle sheet currently exists with sufficient durability for conventional lithographical processes. Here, we report large photo and/or e-beam lithographic patternable metal nanoparticle sheets with improved durability by incorporating molecular cross-linked structures between nanoparticles. The cross-linked structures were easily formed by a one-step chemical reaction; immersing a single nanoparticle sheet consisting of core metals, to which capping molecules ionically bond, in a dithiol ethanol solution. The ligand exchange reaction processes were discussed in detail, and we demonstrated 20 μm wide line and space patterns, and a 170 nm wide line of the silver nanoparticle sheets.

Laguna Verde - A photo story

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-04-15

Safety is one of the main factors in the construction and operation of a modern nuclear power plant. There are many barriers between the fission products produced in the fuel elements of the core, and the environment: the cladding of the fuel pins which are enclosed in the reactor core, the pressure vessel containing the core and which in turn is enclosed in the reactor containment, all this being located in a low-pressure secondary containment or reactor building. Despite these precautions, nuclear safety is still a widely-discussed issue. The important fact remains, however, that there has not been a single radiation-induced fatality or serious injury at any civilian nuclear power plant during 20 years of nuclear power generation. This includes the accident that occurred in March 1979 at the Three Mile Island nuclear plant in the USA. A substantial component contributing to safety in a nuclear power plant is the containment. The following photos of Laguna Verde, Mexico's first nuclear power station being constructed at Alta Lucero in Vera Cruz, give an impression of how strong this concrete and steel containment actually is. Laguna Verde consists of two 600 MWe units and the plant is scheduled for commercial operation in 1982. Construction began in 1974. Both units are boiling-water reactors. The photos show, in general, the construction of the primary containment for the reactors (the dry wells). The dry well contains the reactor itself and has two layers: the leak-tight steel liner and the heavy concrete building. The purpose of the primary containment is to retain steam and gases that might escape in an emergency and to direct these through relief tubes to a water pond for cooling. Surrounding this primary containment will be a reactor building which serves as a secondary low-pressure containment, able to operate at pressures up to 0.2 atmospheres.

Bear at the back door | Prinsloo | Scientia Militaria: South African ...

African Journals Online (AJOL)

Scientia Militaria: South African Journal of Military Studies. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 3 (1979) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Bear at the back door. C Prinsloo ...

Playing with the internet through world wide web

International Nuclear Information System (INIS)

Kim, Seon Tae; Jang, Jin Seok

1995-07-01

This book describes how to use the internet with world wide web. It is divided into six chapters, which are Let's go to the internet ocean, the internet in information superhighway are, connecting the world with a telephone wire such as link with the internet cable and telephone modem, internet service providers, text mode connection, Domain and IP address, the principle and use of world wide web ; business, music, fashion, movie and photo, internet news and e-mail, making internet map with web language, and from installation to application of base program such as TCP/IP, SLIP/PPP 3270 Emulator, Finger and NCSA Mosaic.

Door-to-door survey of major neurological disorders (project in Al Quseir City, Red Sea Governorate, Egypt

Directory of Open Access Journals (Sweden)

El Tallawy HN

2013-05-01

Full Text Available Hamdy NA El Tallawy,1 Wafaa MA Farghaly,1 Tarek A Rageh,1 Ghaydaa A Shehata,1 Reda Badry,1 Nabil A Metwally,2 Esam A El Moselhy,2 Mahmoud Hassan,2 Mohamed A Sayed,3 Ahmed A Waris,1 Yaser Hamed,2 Islam Shaaban,2 Mohamed A Hamed,1 Mahmoud Raafat Kandil11Department of Neurology, Faculty of Medicine, Assiut University, Assiut, Egypt; 2Department of Neurology and Public Health, Faculty of Medicine, Al-Azhar University (Assiut branch, Assiut, Egypt; 3Department of Neurology, Faculty of Medicine, Sohag University, Sohag, EgyptAbstract: A door-to-door survey, including every household, was conducted for all inhabitants of Al Quseir City (33,283, Red Sea Governorate, Egypt by three specialists of neurology as well as nine senior staff members of neurology and 15 female social workers to assess the epidemiology of major neurological disorders. Over six phases, from July 1, 2009 to January 31, 2012, screening of all eligible people in the population was carried out, by which case ascertainment of all major neurological disorders included in the study was done according to the accepted definitions and diagnostic criteria of the World Health Organization. The order of frequency of prevalence of the studied neurological disorders was dementia (3.83% for those aged > 60 years, migraine (2.8% for those aged > 8 years, stroke (6.2/1000 for those aged > 20 years, epilepsy (5.5/1000, Parkinson’s disease (452.1/100,000 for those aged > 40 years, cerebral palsy (3.6/1000 among children 37 years, chorea (21.03/100,000, athetosis (15/100,000, and multiple sclerosis (13.74/100,000. The incidence rates of stroke, epilepsy, and Bell’s palsy were 181/100,000, 48/100,000, and 98.9/100,000 per year, respectively.Keywords: prevalence, incidence, neurological disorders

Mini Review - Phenolics for skin photo-aging.

Science.gov (United States)

Ali, Atif

2017-07-01

Photo-aging is one of the foremost problems caused by generation of reactive oxygen species when skin is exposed on UV irradiation. In view of that, generation of reactive oxygen species intermingle with proteins, DNA, saccharides and fatty acids triggering oxidative mutilation and effects are in the appearance of distressed cell metabolism, morphological and ultra-structural changes, mistreat on the routes and revisions in the demarcation, propagation and skin apoptosis living cells which leads to photo-aging. Plant phenolics are universally found in both edible and inedible plants and have extended substantial interest as photo-protective for human skin due to their antioxidant activities. The objective of this review is to highlight the use of plant phenolics for their antioxidant activities against photo-aging.

Etude Experimentale du Photo-Injecteur de Fermilab

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Jean-Paul [Orsay

2001-01-01

TESLA (TeV Superconducting Linear Accelerator) is an international collaboration which is studying the feasibility of an $e^+e^-$ collider of energy 0.8 TeV in the center of mass. One of the first goals of this collaboration was to construct a prototype linear accelerator at the DESY Laboratory in Hamburg, the TESLA Test Facility (TTF), in order to establish the technical basis for the collider. Two injectors were developed for TTF: a thermionic injector (developed by LAL-Orsay, IPN-Orsay, and CEA-Saclay) and a photo-injector (developed by Fermilab). The thermionic injector was used from February 1997 to October 1998, and then it was replaced by the photo-injector, which was first operated in December 1998. Another photo-injector, identical to the one delivered to TTF, was installed at Fermilab in the $A{\\emptyset}$ Building. The first beam from the latter was produced on 3 March 1999. The photo-injector consists of an RF gun, followed by a superconducting cavity. The RF gun is a 1.625-cell copper cavity with a resonant frequency of 1.3 GHz. The gun contains a cesium telluride ($C_{s_2}$Te) photo-cathode, which is illuminated by UV pulses from a Nd:YLF laser. The system can produce trains of 800 bunches of photo-electrons of charge 8 nC per bunch with spacing between bunches of 1$\\mu$s and 10 Hz repetition rate. Upon emerging from the RF gun, the beam energy is 4 to 5 MeV; the beam is then rapidly accelerated by the superconducting cavity to an energy of 17 to 20 MeV. Finally, a magnetic chicane, consisting of 4 dipoles, produces longitudinal compression of the electron bunches. This thesis describes the installation of the photo-injector at Fermilab and presents the experimentally-measured characteristics of the injector. The principal measurements were quantum eciency, dark current, transverse emittance, and bunch length. The conclusion from these studies is that the quality of the photo-injector beam fullls the design goals. The photo-injector at Fermilab is

Photo-induced reduction of flavin mononucleotide in aqueous solutions

International Nuclear Information System (INIS)

Song, S.-H.; Dick, B.; Penzkofer, A.

2007-01-01

The photo-induced reduction of flavin mononucleotide (FMN) in aqueous solutions is studied by absorption spectra measurement under aerobic and anaerobic conditions. Samples without exogenous reducing agent and with the exogenous reducing agents ethylene-diamine-tetraacetic acid (EDTA) and dithiothreitol (DTT) are investigated. Under anaerobic conditions the photo-induced reduction with and without reducing agents is irreversible. Under aerobic conditions the photo-reduction without added reducing agent is small compared to the photo-degradation, and the photo-reduction of FMN by the reducing agents is reversible (re-oxidation in the dark). During photo-excitation of FMN the dissolved oxygen is consumed by singlet oxygen formation and subsequent chemical reaction. After light switch-off slow re-oxidation (slow absorption recovery) occurs due to air in-diffusion from surface. EDTA degradation by FMN excitation leads to oxygen scavenging. The quantum efficiencies of photo-reduction under aerobic and anaerobic conditions are determined. The re-oxidation of reduced FMN under aerobic conditions and due to air injection is investigated

A Knock at the Door. The Oryx Multicultural Folktale Series.

Science.gov (United States)

Shannon, George, Comp.

This folktales collection includes 35 versions, representing countries and cultures from around the world, of the traditional tale in which a dangerous character knocks at the door and tries to trick the children into letting him inside. The stories are intended for use in homes, schools, and libraries by both children and adults who enjoy sharing…

CA Air Resource Board's Off-Road Diesel Equipment Regulation 2017 DOORS Reporting.

Energy Technology Data Exchange (ETDEWEB)

Jadhav, Pradnya [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-02-01

Sandia National Laboratories/CA (SNL/CA) operates 14 diesel vehicles subject to the Off-Road Diesel Equipment Regulation; all the vehicles are classified as low-use vehicles. Annually, SNL/CA must report to the CA Air Resources Board (ARB) the hour-meter readings on our Off-Road Low-Use Diesel Equipment. This is to verify to the CA ARB that our equipment is being operated less than 200 hr/yr and therefore is considered “low-use” and not subject to the strict emissions standards for off-road diesel equipment. The reporting is done using DOORS, the CA ARB’s on-line reporting tool. The hour meter data for CY2017 has already been submitted using DOORS. The final step in the annual reporting process, which needs to be done by DOE, is to submit the Responsible Official Affirmation of Reporting (ROAR), which affirms that the information reported using DOORS is accurate. The ROAR is to be signed by a “Responsible Official” and can be submitted as a hardcopy ROAR or an electronic ROAR (e-ROAR) by March 1st, 2018. CA ARB’s preferred mechanism of ROAR submission is by using the e-ROAR.

Photos and Videos

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Observers are required to take photos and/or videos of all incidentally caught sea turtles, marine mammals, seabirds and unusual or rare fish. On the first 3...

Numerical modeling of cold room's hinged door opening and closing processes

Science.gov (United States)

Carneiro, R.; Gaspar, P. D.; Silva, P. D.; Domingues, L. C.

2016-06-01

The need of rationalize energy consumption in agrifood industry has fasten the development of methodologies to improve the thermal and energy performances of cold rooms. This paper presents a three-dimensional (3D) transient Computational Fluid Dynamics (CFD) modelling of a cold room to evaluate the air infiltration rate through hinged doors. A species transport model is used for modelling the tracer gas concentration decay technique. Numerical predictions indicate that air temperature difference between spaces affects the air infiltration. For this case study, the infiltration rate increases 0.016 m3 s-1 per K of air temperature difference. The knowledge about the evolution of air infiltration during door opening/closing times allows to draw some conclusions about its influence on the air conditions inside the cold room, as well as to suggest best practices and simple technical improvements that can minimize air infiltration, and consequently improve thermal performance and energy consumption rationalization.

Partnering with Families through Photo Collages

Science.gov (United States)

Bacigalupa, Chiara

2016-01-01

This article describes the implementation and benefits of a photo-based family communication method called Daily Explorations. Daily Explorations are one- to two-page photo collages that are annotated with meaningful explanations of children's play and e-mailed to parents every day. The process, described in more detail in this article, is a…

Development of automatic air intake door control system for exhaust gas. Prevention of contaminated air by controlling A/C air intake door; Haiki gas taio auto naigaiki system no kaihatsu. Eakon suikomiguchi seigyo ni yoru haiki gas no shashitsunai eno shinnyu boshi

Energy Technology Data Exchange (ETDEWEB)

Honda, Y; Samukawa, K [Denso Corp., Aichi (Japan)

1997-10-01

Thermal comfort in the cabin of vehicle is upgraded by developing the climate control system Passengers must control the intake door of air conditioner to reduce entering Exhaust Gas into the cabin. This paper is concerned with development the automatic intake door control system to acquire high comfort performance of passengers. 8 figs., 1 tab.

Strategies for the photo-control of endogenous protein activity.

Science.gov (United States)

Brechun, Katherine E; Arndt, Katja M; Woolley, G Andrew

2017-08-01

Photo-controlled or 'optogenetic' effectors interfacing with endogenous protein machinery allow the roles of endogenous proteins to be probed. There are two main approaches being used to develop optogenetic effectors: (i) caging strategies using photo-controlled conformational changes, and (ii) protein relocalization strategies using photo-controlled protein-protein interactions. Numerous specific examples of these approaches have been reported and efforts to develop general methods for photo-control of endogenous proteins are a current focus. The development of improved screening and selection methods for photo-switchable proteins would advance the field. Copyright © 2016 Elsevier Ltd. All rights reserved.

Significant change in the construction of a door to a room with slowed down neutron field by means of commonly used inexpensive protective materials.

Science.gov (United States)

Konefał, Adam; Łaciak, Marcin; Dawidowska, Anna; Osewski, Wojciech

2014-12-01

The detailed analysis of nuclear reactions occurring in materials of the door is presented for the typical construction of an entrance door to a room with a slowed down neutron field. The changes in the construction of the door were determined to reduce effectively the level of neutron and gamma radiation in the vicinity of the door in a room adjoining the neutron field room. Optimisation of the door construction was performed with the use of Monte Carlo calculations (GEANT4). The construction proposed in this paper bases on the commonly used inexpensive protective materials such as borax (13.4 cm), lead (4 cm) and stainless steel (0.1 and 0.5 cm on the side of the neutron field room and of the adjoining room, respectively). The improved construction of the door, worked out in the presented studies, can be an effective protection against neutrons with energies up to 1 MeV. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Construction and testing of a blower-door assembly for regulation of air pressure within structures

International Nuclear Information System (INIS)

Steele, W.D.

1987-09-01

The Technical Measurements Center is evaluating several methods to decrease the time required to determine an annual average radon-daughter concentration in structures. One method involves stabilizing the air pressure within the structure at a constant pressure with reference to external atmospheric or soil-gas pressure. This report describes the construction and preliminary testing of a blower-door system to maintain a constant differential air pressure within a structure. The blower-door assembly includes a collapsible frame and a large fan to occlude a doorway, a damper with an actuator to control air flow, a controller to drive the damper actuator, and a pressure transducer to measure the differential pressure. Preliminary testing of the system indicates that pressure within the structure in the range of 1 to 20 Pascals can be held to within approximately +-1 Pa of the set point. Further testing of the blower-door system is planned to provide data on the applicability of this method to short-duration tests for annual average radon-daughter concentration estimates. 13 figs., 1 tab

A way to the Photo Master Expert

Science.gov (United States)

Inagaki, Toshihiko

After the author presided over the photographer's group for 15 years or more, the author met with the Photo Master certificate examination. And the author took the certificate examination, and was authorized as a Photo Master Expert in 2005. In this report, the outline how photographic technology has been mastered in order to adapt the photographer's group to the great change of photography from film to digital and how the contents of the activity of a photographer's group have changed is described. And the progress which took the Photo Master certificate examination as a good opportunity to prove the achievement level of those activities is described. And as a photographic activity after Photo Master Expert authorization, the shooting method of mural painting in the royal tomb of Amenophis III is described.

Ge/Si(001) heterostructures with dense arrays of Ge quantum dots: morphology, defects, photo-emf spectra and terahertz conductivity.

Science.gov (United States)

Yuryev, Vladimir A; Arapkina, Larisa V; Storozhevykh, Mikhail S; Chapnin, Valery A; Chizh, Kirill V; Uvarov, Oleg V; Kalinushkin, Victor P; Zhukova, Elena S; Prokhorov, Anatoly S; Spektor, Igor E; Gorshunov, Boris P

2012-07-23

: Issues of Ge hut cluster array formation and growth at low temperatures on the Ge/Si(001) wetting layer are discussed on the basis of explorations performed by high resolution STM and in-situ RHEED. Dynamics of the RHEED patterns in the process of Ge hut array formation is investigated at low and high temperatures of Ge deposition. Different dynamics of RHEED patterns during the deposition of Ge atoms in different growth modes is observed, which reflects the difference in adatom mobility and their 'condensation' fluxes from Ge 2D gas on the surface for different modes, which in turn control the nucleation rates and densities of Ge clusters. Data of HRTEM studies of multilayer Ge/Si heterostructures are presented with the focus on low-temperature formation of perfect films.Heteroepitaxial Si p-i-n-diodes with multilayer stacks of Ge/Si(001) quantum dot dense arrays built in intrinsic domains have been investigated and found to exhibit the photo-emf in a wide spectral range from 0.8 to 5 μm. An effect of wide-band irradiation by infrared light on the photo-emf spectra has been observed. Photo-emf in different spectral ranges has been found to be differently affected by the wide-band irradiation. A significant increase in photo-emf is observed in the fundamental absorption range under the wide-band irradiation. The observed phenomena are explained in terms of positive and neutral charge states of the quantum dot layers and the Coulomb potential of the quantum dot ensemble. A new design of quantum dot infrared photodetectors is proposed.By using a coherent source spectrometer, first measurements of terahertz dynamical conductivity (absorptivity) spectra of Ge/Si(001) heterostructures were performed at frequencies ranged from 0.3 to 1.2 THz in the temperature interval from 300 to 5 K. The effective dynamical conductivity of the heterostructures with Ge quantum dots has been discovered to be significantly higher than that of the structure with the same amount of bulk

To Enhance the Fire Resistance Performance of High-Speed Steel Roller Door with Water Film System

Directory of Open Access Journals (Sweden)

De-Hua Chung

2015-01-01

Full Text Available The structure of high-speed roller door with water film has improved in this study. The flameproof water film system is equipped with a water circulating device to reduce the water consumption of water film system. The water film is generated at the roller box of the high-speed roller door in this study. The heating test is done with the full-scale heating furnace. Both cases of the water film on unexposed surface and water film on exposed surface passed the fire resistance test based on ISO 834, proving that the high-speed roller door with water film system has 120A fire resistance period. The main findings indicate that the water film on exposed surface shows that as the amount of water film evaporated by high temperature inside the furnace must be greater than the evaporation capacity of water film on unexposed surface, the required water supply is 660 L more than the water film on unexposed surface.

Today’s Mumbai as Photo-Textuality

Directory of Open Access Journals (Sweden)

Carmen Concilio

2015-06-01

Full Text Available The aim of this essay is to enquire into representations of the city of Mumbai whose urban development has produced images of heaven and hell, sometimes within enclosed boundaries. What is interesting to tackle here is its aestheticisation in a photo-book which presents itself as ‘image-text’ (Mitchel, Stafford, Bombay/Mumbai. Immersions (2013. Not differently from what happens in other cities, such as Cape Town, for instance, here considered only very briefly as counterpoint, the Indian megalopolis’s development has produced disconnected images of urban heaven and hell. The photo-text here discussed presents itself as a composite narrative of words and photos, as the product of the cooperation between an Indian woman poet, Priya Sarukkai Chabria, and an English photographer now based in France, Christopher Taylor. Last but certainly not least in a long sequence of urban photo-texts, this new project requires the reader’s attention in order to try and clarify its role, its meaning, its function, its ethical/aesthetic responsibilities.

Photo-medical valley. 'Photo medical research center'

International Nuclear Information System (INIS)

Kawanishi, Shunichi; Daido, Hiroyuki; Tajima, Toshiki

2008-01-01

To develop a much more compact cancer diagnosis and therapeutic instrument using high intensity laser technology, Japan Atomic Energy Agency (JAEA) has successfully proposed this novel effort to the Ministry of Education, Culture, Sports, Science and Technology (MEXT) program as the creation of a 'photo-medical industrial valley' base in 2007 fiscal year. In this report, a new laser techniques to drive controlled ion beams is described. It is very important approach to realize a laser-driven ion accelerator. (author)

Degradation of ethylparaben under simulated sunlight using photo-Fenton.

Science.gov (United States)

Zúñiga-Benítez, Henry; Peñuela, Gustavo A

2016-01-01

Ethylparaben (EPB) has been classified by different research groups as a potential endocrine-disrupting chemical, implying that it can potentially interfere with the normal balance of the endocrine system of living beings, which with its presence in different effluents, including drinking water, generates the need to seek methods that allow its removal from different water bodies. Advanced oxidation processes have been employed widely to remove organic compounds from different matrices. In this way, Fenton technology (process based on the reaction between ferrous ions and hydrogen peroxide) has been able to degrade different substrates, but due to the Fe(2+) requirements to carry out the reaction optimally, combination of the conventional Fenton process with visible light radiation (photo-Fenton) is an alternative used in the treatment of pollution due to the presence of chemicals. In this way, the effectiveness of photo-Fenton on EPB degradation was assessed using a face-centered central composite experimental design that allowed assessment of the effects of Fe(2+) and H2O2 initial concentrations on process. In general, results indicated that after 180 min of reaction almost all EPB was eliminated, the dissolved organic carbon in solution was reduced and the sample biodegradability index was increased.

Applications of the photo-nuclear reaction data for activation analysis

International Nuclear Information System (INIS)

Odsuren, M.; Khuukhenkhuu, G.; Turbold, A.; Davaa, S.; Baatarkhuu, D.

2015-01-01

In the relative method of activation analysis by continuum wide spectrum gamma-rays the same isotope is usually used for standard reference element and sample material in connection with different dependence of the reaction cross sections on the irradiation beam energy. But, in practice suitable isotopes for reference element are not always available. So, in this paper, we suggest a new method for photo-activation analysis in which is used the correction factor. This factor takes into account the difference in the photo-nuclear reaction cross section dependence on the gamma-ray energy for standard reference isotope and sample elements. The correction factor is determined by three methods of experimental, theoretical and TALYS evaluation. Pure metal foils of Au, Cu and Mo were irradiated by bremsstrahlung gamma-rays on the electron cyclic accelerator Microtron MT-22 at the Nuclear Research Center, National University of Mongolia. Gamma spectra of the activated metal foils were measured by HP-Ge detector to obtain element contents in the samples. It was shown that experimental results with correction factors are satisfactorily in agreement with real values of the element contents in the samples

Air curtain technology improves working conditions with open hall doors; Luftschleiertechnik verbessert Arbeitsbedingungen bei geoeffneten Hallentoren

Energy Technology Data Exchange (ETDEWEB)

Multhauf, R. [Biddle GmbH, Koeln (Germany)

1998-11-01

Hall doors are indispensable for short logistic distances of product or raw materials management. Air curtain systems make it possible to keep doors open independent of the weather and season. The heating energy requiremens of modern air curtain systems has been reduced significantly. (orig.) [Deutsch] Hallentore sind fuer moeglichst kurze Logistikwege der Waren oder Rohstoffe im industriellen Betrieb unvermeidlich. Luftschleieranlagen ermoeglichen offene Tore unabhaengig von der Witterung und der Jahreszeit. Die zur Betreibung der Luftschleieranlagen notwendige Heizenergie wurde durch neue Entwicklungen stark reduziert. (orig.)

LRO-LAMP failsafe door-open performance: improving FUV measurements of dayside lunar hydration

Science.gov (United States)

Davis, Michael W.; Greathouse, Thomas K.; Kaufmann, David E.; Retherford, Kurt D.; Versteeg, Maarten H.

2017-08-01

The Lunar Reconnaissance Orbiter's (LRO) Lyman Alpha Mapping Project (LAMP) is a lightweight (6.1 kg), lowpower (4.5 W), ultraviolet spectrograph based on the Alice instruments aboard the European Space Agency's Rosetta spacecraft and NASA's New Horizons spacecraft. Its primary job is to identify and localize exposed water frost in permanently shadowed regions (PSRs) near the Moon's poles, and to characterize landforms and albedos in PSRs. LRO launched on June 18, 2009 and reached lunar orbit four days later. LAMP operated with its failsafe door closed for its first seven years in flight. The failsafe door was opened in October 2016 to increase light throughput during dayside operations at the expense of no longer having the capacity to take further dark observations and slightly more operational complexity to avoid saturating the instrument. This one-time irreversible operation was approved after extensive review, and was conducted flawlessly. The increased throughput allows measurement of dayside hydration in one orbit, instead of averaging multiple orbits together to reach enough signal-to-noise. The new measurement mode allows greater time resolution of dayside water migration for improved investigations into the source and loss processes on the lunar surface. LAMP performance and optical characteristics after the failsafe door opening are described herein, including the new effective area, wavelength solution, and resolution.

An instant photo-excited electrons relaxation on the photo-degradation properties of TiO2-x films

CSIR Research Space (South Africa)

Nkosi, SS

2014-11-01

Full Text Available of Photochemistry and Photobiology A: Chemistry 293 (2014) 72–80 An instant photo-excited electrons relaxation on the photo- degradation properties of TiO2−x films S.S. Nkosi a,b,∗, I. Kortidis d, D.E. Motaungc,∗, P.R. Makgwanec, O.M. Ndwandwe b, S.S. Rayc, G...

Benthic Photo Survey: Software for Geotagging, Depth-tagging, and Classifying Photos from Survey Data and Producing Shapefiles for Habitat Mapping in GIS

Directory of Open Access Journals (Sweden)

Jared Kibele

2016-03-01

Full Text Available Photo survey techniques are common for resource management, ecological research, and ground truthing for remote sensing but current data processing methods are cumbersome and inefficient. The Benthic Photo Survey (BPS software described here was created to simplify the data processing and management tasks associated with photo surveys of underwater habitats. BPS is free and open source software written in Python with a QT graphical user interface. BPS takes a GPS log and jpeg images acquired by a diver or drop camera and assigns the GPS position to each photo based on time-stamps (i.e. geotagging. Depth and temperature can be assigned in a similar fashion (i.e. depth-tagging using log files from an inexpensive consumer grade depth / temperature logger that can be attached to the camera. BPS provides the user with a simple interface to assign quantitative habitat and substrate classifications to each photo. Location, depth, temperature, habitat, and substrate data are all stored with the jpeg metadata in Exchangeable image file format (Exif. BPS can then export all of these data in a spatially explicit point shapefile format for use in GIS. BPS greatly reduces the time and skill required to turn photos into usable data thereby making photo survey methods more efficient and cost effective. BPS can also be used, as is, for other photo sampling techniques in terrestrial and aquatic environments and the open source code base offers numerous opportunities for expansion and customization.

Preparation for the HEC 1999 Test Beam (photos obtained from TRIUMF)

CERN Multimedia

1999-01-01

Photo1 - Three mated modules after rotation are ready to go in the cryostat. Photo2 - The mated modules on the rotator (at 45 degrees). Photo3 - The HEC-2 modules with all the outer connecting bars in place. Photo4 - The HEC-2 modules with two connecting bars still missing. Photo5 - the happy assembly team with three mated HEC - 1 modules. Photo6 - the inner tie-bars assembled on the HEC2 modules.

Diepe grondwatervervuiling door een bouwlandperceel in de 10-jaarszone van waterwingebied Putten

NARCIS (Netherlands)

Krajenbrink GJW

1988-01-01

In het kader van het stikstofproject heeft het RIVM onderzoek verricht naar de grondwaterverontreiniging tot max. 70 meter diepte onder- en benedenstrooms van een bouwlandperceel, omgeven door bos. Het water in de 180 meter dikke grofzandige freatische aquifer is gedetailleerd bemonsterd met

CT and MRI-based door-needle-times for acute stroke patients a quasi-randomized clinical trial

DEFF Research Database (Denmark)

Hansen, Christine Krarup; Christensen, Anders; Rodgers, Helen

2017-01-01

OBJECTIVES: Door-Needle-times (DNT) of 20min are feasible when Computer Tomography (CT) is used for first-line brain-imaging to assess stroke-patients' eligibility for intravenous-tissue-Plasminogen-Activator (iv-tPA), but the more time-consuming Magnetic Resonance Imaging (MRI)-based-evaluation ......OBJECTIVES: Door-Needle-times (DNT) of 20min are feasible when Computer Tomography (CT) is used for first-line brain-imaging to assess stroke-patients' eligibility for intravenous-tissue-Plasminogen-Activator (iv-tPA), but the more time-consuming Magnetic Resonance Imaging (MRI...

Special sliding door with storable handrail to support senior and handicapped persons to walk by themselves

Science.gov (United States)

Saitou, K.; Noda, N.-A.; Sano, Y.; Takase, Y.; Murai, K.; Wang, Z. F.; Li, S. Q.; Liu, X.; Tanaka, H.; Kubo, Y.

2018-06-01

In this paper, special sliding door is designed in order to support senior and handicapped persons to walk by themselves in hospitals and nursing facilities. This semiautomatic lifting equipment is utilized for the storable handrail to make sure the bad health persons are able to open the door by using a weak force. In this study, to design the equipment of the handrail, the theoretical formula of opening force is derived. Then the simulation is performed by varying geometrical conditions. The simulation results are compared with the experiment results.

Nature and numbers a mathematical photo shooting

CERN Document Server

Glaeser, Georg

2014-01-01

The book offers 180 pages of spectacular photos and unusual views and insights. Learn to see the world with different eyes and be prepared for many surprises and new facts. The photos give rise to questions that are carefully explained with mathematics.

Sulphonated hypocrellin B sensitized photo damage to ascetic hepatoma cells

International Nuclear Information System (INIS)

Yue Jiachang; Wang Tiandun; Pang Suzhen; An Jingyi; Jiang Lijing

1994-01-01

The cellular uptake of sulphonated hypocrellin (S-HB), as well as photo damage on cellular viability, lipid peroxidation and intrinsic fluorescence quenching of membrane protein was studied. It was found that S-HB suitable dissolved in aqueous solution, its cellular uptake is slower than HB. The photo damage on cellular viability both photo sensitizers was close to each other, however the photo sensitizers were different in physical and chemical properties. The HB photo damage target of cells was membrane, but the sulphonated HB photo damage target of cells may be part of organelles, besides the membrane. the experiments showed the sulphonated HB would be suggested as a potential advantage for photodynamic therapy of tumor in clinical application

SILVER RECYCLING FROM PHOTO-PROCESSING WASTE USING ELECTRODEPOSITION METHOD

Directory of Open Access Journals (Sweden)

Mochammad Feri Hadiyanto

2010-06-01

Full Text Available Silver electrodeposition of photo-processing waste and without addition of KCN 1,0 M has been studied for silver recycling. Photo procesing waste containing silver in form of [Ag(S2O32]3- was electrolysed at constant potential and faradic efficiency was determined at various of electrolysis times. Electrolysis of 100 mL photo processing waste without addition of KCN 1,0 M was carried out at constant potential 1.20 Volt, while electrolysis 100 mL photo procesing waste with addition of 10 mL KCN 1,0 M electrolysis was done at 1.30 Volt.The results showed that for silver electrodeposition from photo processing waste with addition of KCN 1,0 M was more favorable with faradic efficiency respectively were 93,16; 87,02; 74,74 and 78,35% for 30; 60; 90 and 120 minutes of electrolysis.   Keywords: Silver extraction, electrodeposition, photo-processing waste

Modus operandi onderzoek naar door informatie en communicatie technologie (ICT) gefaciliteerde criminaliteit

NARCIS (Netherlands)

Junger, Marianne; Montoya, L.; Hartel, Pieter H.; Karemaker, M.

Dit onderzoek beschrijft de invloed van ICT op de 'traditionele' misdrijven door te onderzoeken hoe delicten als inbraak, overvallen en fraude doordrongen zijn van ICT. In totaal zijn 136 woninginbraken, 140 commerciële inbraken, 259 bedreigingen en 274 fraudeza-ken onderzocht. Uit de resultaten

Detection of Tampering Inconsistencies on Mobile Photos

Science.gov (United States)

Cao, Hong; Kot, Alex C.

Fast proliferation of mobile cameras and the deteriorating trust on digital images have created needs in determining the integrity of photos captured by mobile devices. As tampering often creates some inconsistencies, we propose in this paper a novel framework to statistically detect the image tampering inconsistency using accurately detected demosaicing weights features. By first cropping four non-overlapping blocks, each from one of the four quadrants in the mobile photo, we extract a set of demosaicing weights features from each block based on a partial derivative correlation model. Through regularizing the eigenspectrum of the within-photo covariance matrix and performing eigenfeature transformation, we further derive a compact set of eigen demosaicing weights features, which are sensitive to image signal mixing from different photo sources. A metric is then proposed to quantify the inconsistency based on the eigen weights features among the blocks cropped from different regions of the mobile photo. Through comparison, we show our eigen weights features perform better than the eigen features extracted from several other conventional sets of statistical forensics features in detecting the presence of tampering. Experimentally, our method shows a good confidence in tampering detection especially when one of the four cropped blocks is from a different camera model or brand with different demosaicing process.

September 2013: the doors open

CERN Document Server

Antonella Del Rosso

2013-01-01

Three special days and one public open day: at the end of September our Laboratory will open its doors to visitors from CERN, the local region and all over the world. With over 150,000 visitors expected in total, the organisation of the OpenDays is a challenge that a core team of eleven people have taken up with enthusiasm.   They come from several departments but share one goal: making the last four days of September an unforgettable experience for all the visitors who will come to discover the Laboratory and its scientists. The core team in charge of the organisation of the events is co-ordinated by Hermann Schmickler. “The events are an opportunity for us to celebrate  the discoveries, the excellent performance of the technical installations and the vital contribution of all the CERN personnel, the thousands of users and those working under support contracts,” says Hermann Schmickler. The four-day programme will start on Friday 27 September with an “...

Photos from MPI: Module installation at CERN for 1999 Test Beam

CERN Multimedia

1999-01-01

Photo1 - Three HEC-1 modules after mating in the clean room. Photo2 - Close-up of three HEC-1 modules in the clean room when mounting the PSB boards. Photo3 - Three HEC-2 modules being inserted into the test-beam cryostat. Photo4 - Three HEC-2 modules in the test-beam cryostat. Photo5 - Three HEC-1 and three HEC-2 modules in the test-beam cryostat. Photo6 - Three HEC-1 and three HEC-2 modules in the test-beam cryostat.

The hybrid methylene blue-zeolite system: a higher efficient photo catalyst for photo inactivation of pathogenic microorganisms

International Nuclear Information System (INIS)

Smolinska, M.; Cik, G.; Sersen, F.; Caplovicova, M.; Takacova, A.; Kopani, M.

2015-01-01

The composite system can be prepared by incorporation of methylene blue into the channels of zeolite and by adsorption on the surface of the crystals. The composite photo sensitizer effectively absorbs the red light (kmax = 648 nm) and upon illumination with light-emitting diode at a fluence rate of 1.02 mW cm-2 generates effectively reactive singlet oxygen in aqueous solution, which was proved by EPR spectroscopy. To test efficiency for inactivation of pathogenic microorganisms, we measured photo killing of bacteria Escherichia coli and Staphylococcus aureus and yeasts Candida albicans. We found out that after the microorganisms have been adsorbed at the surface of such modified zeolite, the photo generated singlet oxygen quickly penetrates their cell walls, bringing about their effective photo inactivation. The growth inhibition reached almost 50 % at 200 and 400 mg modified zeolite in 1 ml of medium in E. coli and C. albicans, respectively. On the other hand, the growth inhibition of S. aureus reached 50 % at far smaller amount of photo catalyst (30 lg per 1 ml of medium). These results demonstrate differences in sensitivities of bacteria and yeast growth. The comparison revealed that concentration required for IC50 was in case of C. albicans several orders of magnitude lower for a zeolite-immobilized dye than it was for a freely dissolved dye. In S. aureus, this concentration was even lower by four orders of magnitude. Thus, our work suggested a new possibility to exploitation of zeolite and methylene blue in the protection of biologically contaminated environment, and in photodynamic therapy.

49 CFR 1242.74 - Adjusting and transferring loads, and car loading devices and grain doors (accounts XX-33-71 and...

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Adjusting and transferring loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). 1242.74 Section 1242.74 Transportation Other... loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). These accounts pertain...

Photo-dissociation of hydrogen passivated dopants in gallium arsenide

International Nuclear Information System (INIS)

Tong, L.; Larsson, J.A.; Nolan, M.; Murtagh, M.; Greer, J.C.; Barbe, M.; Bailly, F.; Chevallier, J.; Silvestre, F.S.; Loridant-Bernard, D.; Constant, E.; Constant, F.M.

2002-01-01

A theoretical and experimental study of the photo-dissociation mechanisms of hydrogen passivated n- and p-type dopants in gallium arsenide is presented. The photo-induced dissociation of the Si Ga -H complex has been observed for relatively low photon energies (3.48 eV), whereas the photo-dissociation of C As -H is not observed for photon energies up to 5.58 eV. This fundamental difference in the photo-dissociation behavior between the two dopants is explained in terms of the localized excitation energies about the Si-H and C-H bonds

Photo-reactive charge trapping memory based on lanthanide complex

Science.gov (United States)

Zhuang, Jiaqing; Lo, Wai-Sum; Zhou, Li; Sun, Qi-Jun; Chan, Chi-Fai; Zhou, Ye; Han, Su-Ting; Yan, Yan; Wong, Wing-Tak; Wong, Ka-Leung; Roy, V. A. L.

2015-10-01

Traditional utilization of photo-induced excitons is popularly but restricted in the fields of photovoltaic devices as well as photodetectors, and efforts on broadening its function have always been attempted. However, rare reports are available on organic field effect transistor (OFET) memory employing photo-induced charges. Here, we demonstrate an OFET memory containing a novel organic lanthanide complex Eu(tta)3ppta (Eu(tta)3 = Europium(III) thenoyltrifluoroacetonate, ppta = 2-phenyl-4,6-bis(pyrazol-1-yl)-1,3,5-triazine), in which the photo-induced charges can be successfully trapped and detrapped. The luminescent complex emits intense red emission upon ultraviolet (UV) light excitation and serves as a trapping element of holes injected from the pentacene semiconductor layer. Memory window can be significantly enlarged by light-assisted programming and erasing procedures, during which the photo-induced excitons in the semiconductor layer are separated by voltage bias. The enhancement of memory window is attributed to the increasing number of photo-induced excitons by the UV light. The charges are stored in this luminescent complex for at least 104 s after withdrawing voltage bias. The present study on photo-assisted novel memory may motivate the research on a new type of light tunable charge trapping photo-reactive memory devices.

AL-USRCRN Photo Information

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Photos of Alabama USRCRN stations and their immediate surroundings. Taken by engineering techs from NOAA's Atmospheric Turbulence and Diffusion Division (ATDD)....

Modification of Titanium Dioxide Nanoparticles With Copper Oxide Co-Catalyst for Photo catalytic Degradation of 2,4-Dichlorophenoxyacetic Acid

International Nuclear Information System (INIS)

Leny Yuliati; Siah, W.R.; Nur Azmina Roslan; Mustaffa Shamsuddin

2016-01-01

2,4-dichlorophenoxyacetic acid (2,4-D) is a common herbicide that has been used widely. Due to its excessive usage, the 2,4-D herbicides can cause contamination over agricultural land and water bodies. In the present work, a simple impregnation method was used to modify the commercial titanium dioxide (P25 TiO_2) nanoparticles with the copper oxide. The prepared samples were characterized by X-ray Diffraction (XRD), reflectance UV-visible and fluorescence spectroscopies. It was observed that the incorporation of copper oxide did not significantly affect the crystal structure of P25 TiO_2. On the other hand, the presence of copper oxide was confirmed by reflectance UV-visible and fluorescence spectroscopies. The activity of the prepared sample was evaluated for photo catalytic removal of the 2,4-D. The photo catalytic activity of the TiO_2 increased with the increase of copper oxide loading up to 0.5 mol %. Unfortunately, the higher loading amount of copper oxide resulted in the lower photo catalytic activity. This study suggested that the higher photo catalytic activities obtained on the low loading samples were due to the lower electron-hole recombination. (author)

Using Participatory Photo Novels to Teach Marketing

Science.gov (United States)

Das, Kallol

2012-01-01

Teaching the restless young generation business students of today is not easy. Furthermore, the traditional lecture method has failed miserably to engage the business students and deliver significant learning. The author presents a discussion on the photo novel as an attractive communication medium and the participatory photo novel as an…

Looking at the Family Photo Album

DEFF Research Database (Denmark)

Sandbye, Mette

2014-01-01

Having been the most widespread practice of photography since the late 19th century, it is only in the recent few decades that family photography has come into focus of academic attention. Scholars working with family albums have mainly come from anthropology, whereas scholars from the aesthetical......, and affective qualities that reach further than the individual owner and that should be put forward, also within the fields of aesthetics and humanities. Family photo albums are about social and emotional communication, they can be interpreted as ways of understanding and coming to terms with life...... fields, art history, photography studies, and cultural studies have been more hesitant about how to approach such a material. Using three family photo albums from the late 1960s and onwards as examples, the goal of this paper is to underline that family photos contain emotional, psychological...

Dynamic properties of a metal photo-thermal micro-actuator.

Science.gov (United States)

Shi, B; Zhang, H J; Wang, B; Yi, F T; Jiang, J Z; Zhang, D X

2015-02-20

This work presents the design, modeling, simulation, and characterization of a metal bent-beam photo-thermal micro-actuator. The mechanism of actuation is based on the thermal expansion of the micro-actuator which is irradiated by a laser, achieving noncontact control of the power supply. Models for micro-actuators were established and finite-element simulations were carried out to investigate the effects of various parameters on actuation properties. It is found that the thermal expansion coefficient, thermal conductivity, and the geometry size largely affected actuation behavior whereas heat capacity, density, and Young's modulus did not. Experiments demonstrated the dynamic properties of a Ni micro-actuator fabricated via LIGA technology with 1100/30/100 μm (long/wide/thick) arms. The tip displacement of the micro-actuator could achieve up to 42 μm driven by a laser beam (1064 nm wavelength, 1.2 W power, and a driving frequency of 1 HZ). It is found that the tip displacement decreases with increasing laser driving frequency. For 8 Hz driving frequency, 17 μm (peak-valley value) can be still reached, which is large enough for the application as micro-electro-mechanical systems. Metal photo-thermal micro actuators have advantages such as large displacement, simple structure, and large temperature tolerance, and therefore they will be promising in the fields of micro/nanotechnology.

Detoxification and biodegradability enhancement of aqueous solutions of four commercial pesticides along a Photo-Fenton treatment

International Nuclear Information System (INIS)

Amat, A. M.; Arques, A.; Domenech, A.; Garcia-Ripoll, A.; Vicente, R.

2009-01-01

Photo-Fenton treatment has proven to be efficient to remove recalcitrant pollutants as commercial pesticides commonly employed in citric cultivars in the Mediterranean coast of Spain as Laition, Sevnol, Ultracid and Metasystox. However, the photon-Fenton treatment resulted to be less efficient to remove organic matter; nevertheless it could be employed as a pre-treatment to couple with biological processes, widely used in wastewater treatment. (Author)

Detoxification and biodegradability enhancement of aqueous solutions of four commercial pesticides along a Photo-Fenton treatment

Energy Technology Data Exchange (ETDEWEB)

Amat, A. M.; Arques, A.; Domenech, A.; Garcia-Ripoll, A.; Vicente, R.

2009-07-01

Photo-Fenton treatment has proven to be efficient to remove recalcitrant pollutants as commercial pesticides commonly employed in citric cultivars in the Mediterranean coast of Spain as Laition, Sevnol, Ultracid and Metasystox. However, the photon-Fenton treatment resulted to be less efficient to remove organic matter; nevertheless it could be employed as a pre-treatment to couple with biological processes, widely used in wastewater treatment. (Author)

Photo-induced-heat localization on nanostructured metallic glasses

Science.gov (United States)

Uzun, Ceren; Kahler, Niloofar; Grave de Peralta, Luis; Kumar, Golden; Bernussi, Ayrton A.

2017-09-01

Materials with large photo-thermal energy conversion efficiency are essential for renewable energy applications. Photo-excitation is an effective approach to generate controlled and localized heat at relatively low excitation optical powers. However, lateral heat diffusion to the surrounding illuminated areas accompanied by low photo-thermal energy conversion efficiency remains a challenge for metallic surfaces. Surface nanoengineering has proven to be a successful approach to further absorption and heat generation. Here, we show that pronounced spatial heat localization and high temperatures can be achieved with arrays of amorphous metallic glass nanorods under infrared optical illumination. Thermography measurements revealed marked temperature contrast between illuminated and non-illuminated areas even under low optical power excitation conditions. This attribute allowed for generating legible photo-induced thermal patterns on textured metallic glass surfaces.

Photo catalyst; Ko shokubai

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

While titanium oxide is excited by the light, electrons of titanium oxide are taken away by the light energy to form positive holes. Water will be decomposed into hydrogen ion and hydroxy radical (OH) by these positive holes. This hydroxy radical is a strong reactive substance called active oxygen, it decomposes organisms. Besides this photo- catalyst function, the titanium oxide can also make surface of a substance superhydrophilic. The super hydrophilicity results in not forming water drops on the glass surface but spreading all over the surface to prevent a covering of fog on the glass surface. The published patents concerning the photo catalysts were 593 from Jan. 1998 to Jan. 1999. The applicant order is the first TOTO 143, the second Daikin Industry 19, the third Toshiba Raitech, Nitto Denko, Hitachi 17 respectively. (NEDO)

Scheduling Trucks in a Cross-Dock with Mixed Service Mode Dock Doors

DEFF Research Database (Denmark)

Bodnar, Peter; Azadeh, Kaveh; Koster, René de

2017-01-01

The problem considered in this paper is how to schedule inbound and outbound trucks subject to time windows at a multidoor cross-dock. Dock doors can either be dedicated to inbound or outbound trucks or be capable of handling both truck types. In addition, loads are allowed to be temporarily...

A functional analysis of photo-object matching skills of severely retarded adolescents.

Science.gov (United States)

Dixon, L S

1981-01-01

Matching-to-sample procedures were used to assess picture representation skills of severely retarded, nonverbal adolescents. Identity matching within the classes of objects and life-size, full-color photos of the objects was first used to assess visual discrimination, a necessary condition for picture representation. Picture representation was then assessed through photo-object matching tasks. Five students demonstrated visual discrimination (identity matching) within the two classes of photos and the objects. Only one student demonstrated photo-object matching. The results of the four students who failed to demonstrate photo-object matching suggested that physical properties of photos (flat, rectangular) and depth dimensions of objects may exert more control over matching than the similarities of the objects and images within the photos. An analysis of figure-ground variables was conducted to provide an empirical basis for program development in the use of pictures. In one series of tests, rectangular shape and background were removed by cutting out the figures in the photos. The edge shape of the photo and the edge shape of the image were then identical. The results suggest that photo-object matching may be facilitated by using cut-out figures rather than the complete rectangular photo.

Photos of the conference

Directory of Open Access Journals (Sweden)

Birgitta Åhman

1984-05-01

Full Text Available Birgitta  Åhman is the photographer of the series of pictures from the conference, also for the cover photo of the full paper edition showing Kongsvold Mountain Hut and Biological Station.

An introduction to photo-injector design

International Nuclear Information System (INIS)

Travier, C.

1993-07-01

A quick overview is given of the RF gun basic theory for photo-injectors and of the presently achievable technical parameters thus providing some guidelines to help the designer in his choices. Simple scaling laws and formulas for both beam dynamics and technical parameters are proposed and compared to corresponding values for existing photo-injectors. Various sophisticated schemes used to improve the performances beyond those given by a straightforward approach are reviewed. (author) 65 refs., 11 figs., 3 tabs

Involving, Sharing, Analysing—Potential of the Participatory Photo Interview

Directory of Open Access Journals (Sweden)

Bettina Kolb

2008-09-01

Full Text Available This article discusses the photo interview method used in a participatory inter- and transdisciplinary research setting. The photo interview has proven particularly useful for sustainability and environmental studies in which eliciting community points of view is crucial to the research effort. Based on experiences in several countries, the author describes and analyses the photo interview process and its three phases—involving, sharing and analysing—and explores potential influences on data quality. In the first phase, researchers use the photo interview method to involve community residents from different levels of society in the research process. In the second phase, the photo interview method encourages community residents and scientists to share insights and perspectives and to partner in developing a common understanding of local structures, processes, and possible solutions. In the third phase, the photo interview method allows researchers to analyse visual and textual data as a representation of a local societal context. In decoding images, researchers ground the analysis in subjective perspectives, use residents' visual codes along with other methods to further analyse community data, and explore the wider societal context in which the study is embedded. URN: urn:nbn:de:0114-fqs0803127

Leren bedrijfseconomische problemen op te lossen door het maken van vakspecifieke schema’s

NARCIS (Netherlands)

Slof, Bert; Erkens, Gijsbert; Kirschner, Paul A.

2010-01-01

Slof, B., Erkens, G., & Kirschner, P. A. (2010). Leren bedrijfseconomische problemen op te lossen door het maken van vakspecifieke schema’s [Learning to solve business-economics problems through constructing domainspecific diagrams]. Tijdschrift voor het Economisch Onderwijs (TEO), 110(4), 226–230.

Bodemverontreiniging en de opname van lood in moestuingewassen : Risico's van lood door bodemverontreiniging

NARCIS (Netherlands)

Otte PF; Romkens PFAM; Rietra RPJJ; Lijzen JPA; LER; mev

2012-01-01

Lood uit bodemverontreinigingen wordt opgenomen door moestuingewassen die daarop worden geteeld. Deze gewassen kunnen een gezondheidsrisico vormen als zij worden geconsumeerd. Uit onderzoek van RIVM en Alterra blijkt nu dat bij hoge concentraties lood in de bodem de opname minder wordt. Hierdoor

Fundamentals of Grid Connected Photo-Voltaic Power Electronic Converter Design

OpenAIRE

Evju, Svein Erik

2007-01-01

In this master thesis the basic theory of grid connected photo-voltaic systems is explained, giving an introduction to the different aspects of system design. Starting with a look at the standards concerning grid connection of distributed resources, and working its way through how the photo-voltaic cells work, to how photo-voltaic modules with electrical converters can be arranged. Some different converter topologies suitable for use with photo-voltaics are found, and based on these topologie...

[Discussion on relationship between "living alone with closed windows and doors" and depression].

Science.gov (United States)

Liu, Fengfeng; Li, Rui

2018-03-12

"Living alone with closed windows and doors"was mentioned in the pathological manifestations of stomach meridian of foot- yangming in Neijing ( The Inner Canon of Huangdi ), which is similar to the symptoms of depression. Currently the treatment of depression is mostly based on"spirit being stored in five organs"theory, and little attention is paid on stomach meridian of foot- yangming . From the pathological manifestations of"living alone with closed windows and doors"in stomach meridian of foot- yangming , the relationship between stomach meridian and depression is discussed from ying-yang and qi -blood. In addition, the close relationship between the stomach meridian and qi -blood, qi movement of five organs, heart and brain is discussed to explore the mechanism of treating depression. In conclusion, the literature and modern research regarding treating depression from stomach meridian are summarized, hoping to provide more clinical methods for the treatment of depression.

Amphiphilic Imbalance and Stabilization of Block Copolymer Micelles on-Demand through Combinational Photo-Cleavage and Photo-Crosslinking.

Science.gov (United States)

Zhang, Xuan; Wang, Youpeng; Li, Guo; Liu, Zhaotie; Liu, Zhongwen; Jiang, Jinqiang

2017-01-01

An amphiphilic block copolymer of poly(ethylene oxide)-b-poly((N-methacryloxy phthalimide)-co-(7-(4-vinyl-benzyloxyl)-4-methylcoumarin)) (PEO 45 -b-P(MAPI 36 -co-VBC 4 )) is designed to improve the micellar stability during the photo-triggered release of hydrophobic cargoes. Analysis of absorption and emission spectra, solution transmittance, dynamic light scattering, and transmission electron microscopy supports that polymer micelles of PEO 45 -b-P(MAPI 36 -co-VBC 4 ) upon the combinational irradiation of 365 and 254 nm light can be solubilized through the photolysis of phthalimide esters and simultaneously crosslinked via the partially reversible photo-dimerization of coumarins. The photo-triggered release experiment shows that the leakage of doxorubicin molecules from crosslinked micelles can be predictably regulated by controlling the irradiation time of 365 and 254 nm light. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

ATLAS TileCal Sub-Module Production at UIUC - Production Submodule Photos (current)

CERN Document Server

Errede, Steve

2000-01-01

Step 7 - Painting Photo 14 - The paint we use is toxic and also settles very quickly, so it must be stirred before every use. Another great product from the Czech Republic. Photo 15 - We even use a motor to stir up the paint. Photo 16 - This is where we paint our Submodules with the "rust proof" paint. Photo 17 - This is a Submodule waiting to be painted in the tank. Photo 18 - Here Dave grinds off excess paint from the end of the Submodule. Photo 19 - Heres what happens to the steel after being painted. Photo 20 - The paint appears to be chaotic in the confined space of .004 inches.

Degradation of flumequine by the Fenton and photo-Fenton processes: Evaluation of residual antimicrobial activity

International Nuclear Information System (INIS)

Rodrigues-Silva, Caio; Maniero, Milena Guedes; Rath, Susanne; Guimarães, José Roberto

2013-01-01

Flumequine is a broad-spectrum antimicrobial agent of the quinolone class, and it is widely used as a veterinary drug in food-producing animals. The presence of flumequine in the environment may contribute to the development of drug resistant bacterial strains. In this study, water samples fortified with flumequine (500 μg L −1 ) were degraded using the Fenton and photo-Fenton processes. The maximum degradation efficiency for flumequine by the Fenton process was approximately 40% (0.5 mmol L −1 Fe(II), 2.0 mmol L −1 H 2 O 2 and 15 min). By applying UV radiation (photo-Fenton process), the efficiency reached more than 94% in 60 min when 0.25 mmol L −1 Fe(II) and 10.0 mmol L −1 H 2 O 2 were used. Under these conditions, the Fenton process was able to reduce the biological activity, whereas the photo-Fenton process eliminated almost all of the antimicrobial activity because it was not detected. Four byproducts with an m/z of 244, 238, 220 and 202 were identified by mass spectrometry, and a degradation pathway for flumequine was proposed. The byproducts were derived from decarboxylation and defluorination reactions and from modifications in the alkylamino chain of the fluoroquinolone. - Highlights: ► Photo-Fenton process achieved the maximum performance, degrading 94% of flumequine. ► As the flumequine concentration decreased, antimicrobial activity also decreased. ► Four byproducts with m/z of 244, 238, 220 and 202 were identified. ► A degradation pathway for flumequine was proposed

Online uitlenen van e-books door bibliotheken: verkenning juridische mogelijkheden en economische effecten

NARCIS (Netherlands)

van der Noll, R.; Breemen, K.; Breemen, V.; Hugenholtz, B.; Brom, M.; Poort, J.

2012-01-01

Het uitlenen van e-books door openbare bibliotheken is in een groeiend aantal landen een realiteit. Dit rapport inventariseert deze praktijk en analyseert de juridische mogelijkheden voor en economische gevolgen van e-lending. In het economische deel van deze verkenning wordt onderzocht in welke

Doors and thresholds: Jeddi's approach to psychiatric disorders.

Science.gov (United States)

Devisch, R; Vervaeck, B

1986-01-01

Professor Essedik Jeddi and his team have introduced a most significant institutional and therapeutic innovation at the Ibn Rochd and Pinel section of the Razi university long-term mental hospital in Tunis (Tunisia). The innovation focuses upon the ambiguity of doors and boundaries in the mental asylum. Doors and walls influence the rhythm of activity and the nature of contact between patients, therapists and the wider society and culture. If they are very rigid, they may disjoin the patient from him- or herself, from his/her body, social network and culture. On the other hand, if such boundaries are completely neglected they may merge these related dimensions as undifferentiated entities. Jeddi's innovation is primarily concerned with placing the spatio-temporal experience of the body and the intimate interpersonal interaction at the centre of treatment. It aims at establishing creative modes of expression, interaction and exchange such as tea-sessions, dancing, singing, verbal communication, clay-modelling, figurative or plastic expression, agricultural works. These relationships mediate and differentiate at the same time between the patient, his/her body-self, and his/her social and cultural world, thus avoiding both the disjunction and the merging. It would seem that the activities concerned with the distinction between 'inside' and 'outside', peasant and urban, self and other (e.g. dancing and singing) are of paramount importance in bringing about such mediating and differentiating relationships. In the present study we limit ourselves to one particularly revealing therapeutic activity, namely dancing to live music. Jeddi's innovation is a unique blend of current developments in psychiatry and psychotherapy with Arabo-Islamic science and philosophy.

The Globe reopens its doors

CERN Multimedia

CERN Bulletin

2016-01-01

After a year of work, the newly renovated Globe of Science and Innovation will open its doors again at 10 a.m. on Tuesday, 19 April. The “Universe of Particles” exhibition has been updated and will be open to the public, free of charge, from 10 a.m. to 5 p.m., Monday to Saturday (except during official CERN closures). The Globe’s programme of lectures and events for the general public will restart at the end of April. What’s on at the Globe in April and May: - 28 April at 6.30 p.m.: Theatre – “Curie_Meitner_Lamarr_indivisible”, a play that pays tribute to the lives of three exceptional women in the field of science and technology (in English). Reservations: http://indico.cern.ch/e/cmli - 10 May at 8.30 p.m.: Lecture – “Le modèle du CERN et les grands défis mondiaux” (“The CERN model and the key global challenges”) by Michel Spiro (in French with simultaneous ...

Implications of China's Open-Door Policy for Families: A Family Impact Analysis

Science.gov (United States)

Quach, Andrew S.; Anderson, Elaine A.

2008-01-01

China's open-door policy (ODP) was created in 1978 as a response to the severe economic depression affecting the country after the Cultural Revolution. The policy was designed to restore China's financial status and lift the nation out of destitution. By all accounts, the ODP has been successful in improving the country's monetary condition.…

Photo annealing effect on p-doped inverted organic solar cell

Energy Technology Data Exchange (ETDEWEB)

Lafalce, Evan; Toglia, Patrick; Lewis, Jason E.; Jiang, Xiaomei, E-mail: xjiang@usf.edu [Department of Physics, University of South Florida, Tampa, Florida 33620 (United States)

2014-06-28

We report the transient positive photo annealing effect in which over 600% boost of power conversion efficiency was observed in inverted organic photovoltaic devices (OPV) made from P3HT/PCBM by spray method, after 2 hrs of constant solar AM 1.5 irradiation at low temperature. This is opposite to usual photodegradation of OPV, and cannot be explained by thermal activation alone since the mere temperature effect could only account for 30% of the enhancement. We have investigated the temperature dependence, cell geometry, oxygen influence, and conclude that, for p-doped active layer at room temperature, the predominant mechanism is photo-desorption of O{sub 2}, which eliminates electron traps and reduces space charge screening. As temperature decreases, thermal activation and deep trap-state filling start to show noticeable effect on the enhancement of photocurrent at intermediate low temperature (T = 125 K). At very low temperature, the dominant mechanism for photo annealing is trap-filling, which significantly reduces recombination between free and trapped carriers. At all temperature, photo annealing effect depends on illumination direction from cathode or anode. We also explained the large fluctuation of photocurrent by the capture/reemit of trapped electrons from shallow electron traps of O{sub 2}{sup -} generated by photo-doping. Our study has demonstrated the dynamic process of photo-doping and photo-desorption, and shown that photo annealing in vacuum can be an efficient method to improve OPV device efficiency.

40 CFR 63.305 - Alternative standards for coke oven doors equipped with sheds.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Alternative standards for coke oven doors equipped with sheds. 63.305 Section 63.305 Protection of Environment ENVIRONMENTAL PROTECTION... SOURCE CATEGORIES National Emission Standards for Coke Oven Batteries § 63.305 Alternative standards for...

Resultaten van de proeftuinen van PACT : inclusie door interprofessionele samenwerking in kindvoorzieningen 0-6 jaar

NARCIS (Netherlands)

Doornenbal, Jeannette; Balledux, Marielle; Fukkink, Ruben; Spoelstra, Jolanda; van Verseveld, Marloes; van Yperen, Tom

2018-01-01

In deze bijdrage worden de onderzoeksresultaten gepresenteerd van de ontwikkelingen in de PACT-proeftuinen om door middel van interprofessionele samenwerking tussen onderwijs, kinderopvang en zorg inclusie van elk kind te realiseren.

Combined photo-Fenton-SBR process for antibiotic wastewater treatment

International Nuclear Information System (INIS)

Elmolla, Emad S.; Chaudhuri, Malay

2011-01-01

Highlights: · The work focused on hazardous wastewater (antibiotic wastewater) treatment. · Complete degradation of the antibiotics achieved by the treatment process. · The SBR performance was found to be very sensitive to BOD 5 /COD ratio below 0.40. · Combined photo-Fenton-SBR process is a feasible treatment process for the antibiotic wastewater. - Abstract: The study examined combined photo-Fenton-SBR treatment of an antibiotic wastewater containing amoxicillin and cloxacillin. Optimum H 2 O 2 /COD and H 2 O 2 /Fe 2+ molar ratio of the photo-Fenton pretreatment were observed to be 2.5 and 20, respectively. Complete degradation of the antibiotics occurred in one min. The sequencing batch reactor (SBR) was operated at different hydraulic retention times (HRTs) with the wastewater treated under different photo-Fenton operating conditions (H 2 O 2 /COD and H 2 O 2 /Fe 2+ molar ratio). The SBR performance was found to be very sensitive to BOD 5 /COD ratio of the photo-Fenton treated wastewater. Statistical analysis of the results indicated that it was possible to reduce the Fe 2+ dose and increase the irradiation time of the photo-Fenton pretreatment. The best operating conditions of the combined photo-Fenton-SBR treatment were observed to be H 2 O 2 /COD molar ratio 2, H 2 O 2 /Fe 2+ molar ratio 150, irradiation time 90 min and HRT of 12 h. Under the best operating conditions, 89% removal of sCOD with complete nitrification was achieved and the SBR effluent met the discharge standards.

ATLAS TileCal Sub-Module Production at UIUC - Photos of Prototype PMT Test Setup

CERN Multimedia

Errede, Steve

2001-01-01

Photo 1 - Entrance to the lab. Photo 2 - A shot of the center of the lab. Photo 3 - The back of the lab. The Dark Box: Photo 4 - A view of the outside of the Dark Box along with its dry nitrogen system. Photo 5 - A view of the inside of the Dark Box. Photo 6 - The LED holder, beam splitter (removed in this shot), and a pulsing circuit. Photo 7 - The PMT holder. Photo 8 - A possible design for a Stepper Motor controlled filter wheel. Photo 9 - Polishing area for the optical fibers. R&D Work on Stepper Motor/Motion Control: Photo 10 - The complete prototype of the Stepper Motor setup. Photo 11 - The prototype of the Main Stepper Motor Driver Board. Photo 12 - The prototype of the Stepper Motor Power Amplifer. Photo 13 - The prototype of the Stepper Motor LabPC + Interface Board.

Improved Harmony Search Algorithm for Truck Scheduling Problem in Multiple-Door Cross-Docking Systems

Directory of Open Access Journals (Sweden)

Zhanzhong Wang

2018-01-01

Full Text Available The key of realizing the cross docking is to design the joint of inbound trucks and outbound trucks, so a proper sequence of trucks will make the cross-docking system much more efficient and need less makespan. A cross-docking system is proposed with multiple receiving and shipping dock doors. The objective is to find the best door assignments and the sequences of trucks in the principle of products distribution to minimize the total makespan of cross docking. To solve the problem that is regarded as a mixed integer linear programming (MILP model, three metaheuristics, namely, harmony search (HS, improved harmony search (IHS, and genetic algorithm (GA, are proposed. Furthermore, the fixed parameters are optimized by Taguchi experiments to improve the accuracy of solutions further. Finally, several numerical examples are put forward to evaluate the performances of proposed algorithms.

CERN Photo Club (CPC) / Canon Contest - My View of CERN

CERN Multimedia

Steyaert, Didier

2016-01-01

The CERN Photo Club has organized in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016.

Open-ended and Open-door Treatment Groups for Young People with Mental Illness.

Science.gov (United States)

Miller, Rachel; Mason, Susan E

2012-01-01

The concept of open-ended groups is expanded to include an open-door model (OEOD) wherein members with severe mental illnesses, including schizophrenia disorders and bi-polar, can join, leave, and re-enter groups as their life circumstances dictate their availability and willingness for treatment. This model is grounded on the work of Schopler and Galinsky's (1984/2006) and Galinsky and Schopler's (1989) theses on the value and processes of open-ended groups and includes perspectives on mutual aid and group development. Groupwork with the OEOD format is illustrated with examples taken from a group of 79 participants diagnosed with first-episode schizophrenia/schizoaffective disorders, 40 of who had co-occurring substance abuse. Of the 79 participants in the OEOD group program, 70 (89%) remained in treatment for the maximum of 3 years. The over-all value of group treatment for this population is reviewed along with the small number of available publications on open-ended and open-door-type groups.

ATLAS TileCal Sub-Module Production at UIUC - Production Submodule Photos (current)

CERN Multimedia

Errede, Steve

2000-01-01

Step 1 - Washing Plates Photo 1 - Spacers in their original box straight from the Czech Republic.. notice the large amounts of grease. Photo 2 - Spacers on the table ready to be washed. Photo 3 - Photo 3 - Scrubbing the grease off with Alconox

Photos vs silhouettes for evaluation of African American profile esthetics.

Science.gov (United States)

Hockley, Andrew; Weinstein, Martin; Borislow, Alan J; Braitman, Leonard E

2012-02-01

Patient photos and silhouettes are commonly used in clinical evaluations and orthodontic research to evaluate profile esthetics. The purpose of this study was to determine whether the use of photos or silhouettes is a more appropriate method of evaluating African American profile esthetics and whether there are different profile esthetic preferences among clinicians when using photos compared with silhouettes. Pretreatment records of 20 adolescent African American patients were selected (10 male, 10 female) from the orthodontic clinic at the Albert Einstein Medical Center in Philadelphia. Each patient's profile photo was digitally changed with imaging software (Dolphin Imaging and Management Solutions, Chatsworth, Calif) to fabricate a series of 7 photos and 7 silhouettes with lip positions at uniform distances relative to Ricketts' E-line standard. Fifteen raters consisting of orthodontic faculty and residents were asked to select the most esthetically pleasing profile from each patient's photo series and silhouette series. More rater preferences for the photographs (86%) were within the acceptable esthetic range (within 2 mm of the E-line in either direction) than were their preferences for silhouettes (66%) (P esthetic norm were more often preferred in the silhouettes than in the photos. Thirty-one percent of the silhouettes preferred by the raters were flatter than the norm compared with 9% of the photos (P = 0.003). Fuller profiles were preferred in only 3% of the silhouettes and 5% of the photos (P = 0.6). Esthetic attractiveness of faces of African American orthodontic patients is rated differently in photos and silhouettes. When evaluating soft-tissue esthetic profile preferences, rater preferences in the photographs were closer to the established esthetic norm than were their preferences in the silhouettes. Using silhouettes to evaluate patient esthetics could influence clinicians or researchers to select profiles that are flatter than the established

Effect of tip geometry on photo-electron-emission from nanostructures.

Science.gov (United States)

Teki, Ranganath; Lu, Toh-Ming; Koratkar, Nikhil

2009-03-01

We show in this paper the strong effect of tip geometry on the photo-electron-emission behavior of nanostructured surfaces. To study the effect of tip geometry we compared the photo-emissivity of Ru and Pt nanorods with pyramidal shaped tips to that of carbon nanorods that display flat top (planar) tips. Flat top architectures gave no significant increase in the emission current, while nanostructures with pyramidal shaped tips showed 3-4 fold increase in photo-emission compared to a thin film of the same material. Pyramidal tip geometries increase the effective surface area that is exposed to the incident photon-flux thereby enhancing the photon-collection probability of the system. Such nano-structured surfaces show promise in a variety of device applications such as photo-detectors, photon counters and photo-multiplier tubes.

Animation of Mapped Photo Collections for Storytelling

Science.gov (United States)

Fujita, Hideyuki; Arikawa, Masatoshi

Our research goal is to facilitate the sharing of stories with digital photographs. Some map websites now collect stories associated with peoples' relationships to places. Users map collections of places and include their intangible emotional associations with each location along with photographs, videos, etc. Though this framework of mapping stories is important, it is not sufficiently expressive to communicate stories in a narrative fashion. For example, when the number of the mapped collections of places is particularly large, it is neither easy for viewers to interpret the map nor is it easy for the creator to express a story as a series of events in the real world. This is because each narrative, in the form of a sequence of textual narratives, a sequence of photographs, a movie, or audio is mapped to just one point. As a result, it is up to the viewer to decide which points on the map must be read, and in what order. The conventional framework is fairly suitable for mapping and expressing fragments or snapshots of a whole story and not for conveying the whole story as a narrative using the entire map as the setting. We therefore propose a new framework, Spatial Slideshow, for mapping personal photo collections and representing them as stories such as route guidances, sightseeing guidances, historical topics, fieldwork records, personal diaries, and so on. It is a fusion of personal photo mapping and photo storytelling. Each story is conveyed through a sequence of mapped photographs, presented as a synchronized animation of a map and an enhanced photo slideshow. The main technical novelty of this paper is a method for creating three-dimensional animations of photographs that induce the visual effect of motion from photo to photo. We believe that the proposed framework may have considerable significance in facilitating the grassroots development of spatial content driven by visual communication concerning real-world locations or events.

Photo-oxidation of LDPE: Effects on elongational viscosity

Science.gov (United States)

Rolón-Garrido, Víctor H.; Wagner, Manfred H.

2013-04-01

Sheets of low-density polyethylene (LDPE) were photo-oxidatively treated at room temperature, and subsequently characterized rheologically in the melt state by shear and uniaxial extensional experiments. For photo-oxidation, a xenon lamp was used to irradiate the samples for times between 1 day and 6 weeks. Linear-viscoelastic characterization was performed in a temperature range of 130 to 220°C to obtain the master curve at 170°C, the reference temperature at which the elongational viscosities were measured. Linear viscoelasticity is increasingly affected by increasing photo-oxidation due to crosslinking of LDPE, as corroborated by an increasing gel fraction as determined by a solvent extraction method. The elongational measurements reveal a strong enhancement of strain hardening until a saturation level is achieved. The elongational data are analyzed in the frame work of two constitutive equations, the rubber-like liquid and the molecular stress function models. Within the experimental window, time-deformation separability is confirmed for all samples, independent of the degree of photo-oxidation.

Effects of multiple viewings of an ultraviolet photo on sun protection behaviors.

Science.gov (United States)

Mahler, H I M

2018-05-02

To determine whether multiple viewings of one's ultraviolet (UV) facial photo differentially affects subsequent sun protection behaviors relative to a single viewing. Pretest-posttest control group. Southern California college students (N = 151) were randomly assigned to be shown their UV facial photo one time, multiple times over the course of 2 weeks, or not at all. Emotional reactions, perceived susceptibility to skin damage, and sun protection intentions were assessed immediately, and sun protection behaviors were assessed during a surprise telephonic follow-up 1 month later. Immediately after viewing a UV photo of their face, participants reported significantly greater perceived susceptibility to skin damage, greater intentions to engage in future sun protection, and more negative emotions than those who had not seen a UV photo. Moreover, 1 month later, those who had viewed their UV photo were less likely to report having sunbathed and reported significantly greater sun protection than did controls. There were no differences in sun protection behaviors between those who had been shown their UV photo only once during the initial intervention session and those who had been sent their UV photo several times thereafter. However, among those who had been sent their UV photo several times, those who reported having viewed their photo on additional occasions reported significantly greater sun protection behaviors than those who had not. Being randomly assigned to view a UV facial photo multiple times generally neither strengthened nor weakened effects on subsequent sun protection behaviors relative to being shown the photo just once. However, among those who were sent their photo and thus had the option of viewing it more often than they had been assigned to, those who chose to view their photo more frequently also engaged in more sun protection behaviors. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

The effect of screening doors and windows on indoor density of Anopheles arabiensis in south-west Ethiopia: a randomized trial.

Science.gov (United States)

Massebo, Fekadu; Lindtjørn, Bernt

2013-09-12

Screening of houses might have impact on density of indoor host-seeking Anopheles mosquitoes. A randomized trial of screening windows and doors with metal mesh, and closing openings on eves and walls by mud was conducted to assess if reduce indoor densities of biting mosquitoes. Mosquitoes were collected in forty houses using Centers for Diseases Control and Prevention (CDC) light traps biweekly in March and April 2011. A randomization of houses into control and intervention groups was done based on the baseline data. Windows and doors of 20 houses were screened by metal mesh, and openings on the walls and eves closed by mud and the rest 20 houses were used as control group. Mosquitoes were collected biweekly in October and November 2011 from both control and intervention houses. A Generalized Estimating Equations (GEE) with a negative binomial error distribution was used to account for over dispersion of Anopheles arabiensis and culicine counts and repeated catches made in the same house. Screening doors and windows, and closing openings on eves and wall by mud reduced the overall indoor densities of An. arabiensis by 40%. The effect of screenings pronounced on unfed An. arabiensis by resulting 42% reduction in houses with interventions. The total costs for screening windows and doors, and to close openings on the eves and walls by mud was 7.34 USD per house. Screening houses reduced indoor density of An. arabiensis, and it was cheap and can easily incorporated into malaria vector strategies by local communities, but improving doors and windows fitness for screening should be considered during house construction to increase the efficacy of screenings.

Photo and pH dual-responsive polydiacetylene smart nanocontainer

International Nuclear Information System (INIS)

Li, Jingguo; Yu, Zhiqiang; Jiang, Hao; Zou, Gang; Zhang, Qijin

2012-01-01

Herein, a novel smart nanocontainer was developed by incorporating photo-responsive azobenzene derivative/cyclodextrin (Azo–CD) supramolecular complex into pH-responsive polydiacetylene (PDA) vesicles matrix. The designed nanocontainer exhibited excellent cell-toxicity, and the controlled release property response to external photo and pH stimuli. The photo-controlled inclusion and exclusion reaction between α-cyclodextrin (α-CD) and azobenzene moiety were used to act as the driving force to induce photo-triggered controlled release behavior of the designed nanocontainer. Moreover, the pH-responsive PDA vesicle matrix endowed the designed system with a controlled release property upon pH variation. The facile preparation procedures and their efficiency of response to the external stimuli render the novel smart nanocontainer potential candidate for future applications in remote controlled drug release. -- Graphical abstract: Herein, we developed a novel smart nanocontainer comprising the azobenzene derivative/cyclodextrin supramolecular complex and polydiacetylene vesicles, which exhibited excellent biocompatibility, and controlled release property response to external photo and pH stimuli. Highlights: ► We developed a novel dual-responsive smart polydiacetylene nanocontainer. ► The azobenzene/cyclodextrin complex was introduced into polydiacetylene vesicles. ► The designed nanocontainer exhibited excellent biocompatibility and stability. ► 365 and 435 nm light irradiations are used to realize photo controlled release. ► The smart nanocontainer exhibited controlled release property upon pH variation.

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light.

Science.gov (United States)

Thabit, Mohamed; Liu, Huiling; Zhang, Jian; Wang, Bing

2017-10-01

Pd-MnO 2 /TiO 2 nanotube arrays (NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO 2 /TiO 2 NTAs photo electrodes were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet-visible diffuse reflectance spectrum (DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination (xenon light). The performed analyses illustrated that Pd-MnO 2 codoped particles were successfully deposited onto the surface of the TiO 2 nanotube arrays; DRS results showed significant improvement in visible light absorption which was between 400 and 700nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant (Rhodamine B) illustrated a superior photocatalytic (PC) efficiency of approximately 95% compared to the bare TiO 2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of OH radicals. Copyright © 2017. Published by Elsevier B.V.

Combined photo-Fenton-SBR process for antibiotic wastewater treatment

Energy Technology Data Exchange (ETDEWEB)

Elmolla, Emad S., E-mail: em_civil@yahoo.com [Department of Civil Engineering, Faculty of Engineering, Al-Azhar University, Cairo (Egypt); Chaudhuri, Malay [Department of Civil Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak (Malaysia)

2011-09-15

Highlights: {center_dot} The work focused on hazardous wastewater (antibiotic wastewater) treatment. {center_dot} Complete degradation of the antibiotics achieved by the treatment process. {center_dot} The SBR performance was found to be very sensitive to BOD{sub 5}/COD ratio below 0.40. {center_dot} Combined photo-Fenton-SBR process is a feasible treatment process for the antibiotic wastewater. - Abstract: The study examined combined photo-Fenton-SBR treatment of an antibiotic wastewater containing amoxicillin and cloxacillin. Optimum H{sub 2}O{sub 2}/COD and H{sub 2}O{sub 2}/Fe{sup 2+} molar ratio of the photo-Fenton pretreatment were observed to be 2.5 and 20, respectively. Complete degradation of the antibiotics occurred in one min. The sequencing batch reactor (SBR) was operated at different hydraulic retention times (HRTs) with the wastewater treated under different photo-Fenton operating conditions (H{sub 2}O{sub 2}/COD and H{sub 2}O{sub 2}/Fe{sup 2+} molar ratio). The SBR performance was found to be very sensitive to BOD{sub 5}/COD ratio of the photo-Fenton treated wastewater. Statistical analysis of the results indicated that it was possible to reduce the Fe{sup 2+} dose and increase the irradiation time of the photo-Fenton pretreatment. The best operating conditions of the combined photo-Fenton-SBR treatment were observed to be H{sub 2}O{sub 2}/COD molar ratio 2, H{sub 2}O{sub 2}/Fe{sup 2+} molar ratio 150, irradiation time 90 min and HRT of 12 h. Under the best operating conditions, 89% removal of sCOD with complete nitrification was achieved and the SBR effluent met the discharge standards.

Visit to the Russian Production and Assembly Sites in March 2000 (photos obtained from MPI)

CERN Multimedia

2000-01-01

Photo1 - EST electrode production at LPI. Photo2 - EST electrode production at LPI. Photo3 - EST electrode production at LPI. Photo4 - Cold test of EST electrodes at LPI. Photo5 - Cold test of EST electrodes at LPI. Photo6 - The device for cleaning honeycomb mats at JINR. Photo7 - Module assembly at IHEP. Photo8 - Module assembly at IHEP. Photo9 - Module assembly at IHEP. Photo10 - Transport cases for "Molniya" modules (former bomb cases)

Photo-isomerization induced rapid photo-degradation of optical nonlinearity in cyano substituted stilbene derivative doped poled polymer

International Nuclear Information System (INIS)

Yan Jieyun; Liu Liying; Ji Liyong; Ye Mingxin; Xu Lei; Wang Wencheng

2004-01-01

We found that, although alpha'-cyano-4'-nitro-4-N, N-dimethylaminostilbene has larger hyperpolarizability than that of conventional 4'-N, N-dimethylamino-nitrostilbene, the addition of the cyano group makes it much more easy to photo-isomerize, thus destroying the molecular ordering in poled chromophore doped polymers. Experimental evidence was obtained by monitoring the second-harmonic generation intensity, UV-Vis absorption spectrum, and FTIR spectrum. The photo-isomerization reaction process was monitored by optical pump induced absorption anisotropy measurement. Comparisons with the behaviour of a azobenzene dye are also made

Visible and UV photo-detection in ZnO nanostructured thin films via simple tuning of solution method.

Science.gov (United States)

Khokhra, Richa; Bharti, Bandna; Lee, Heung-No; Kumar, Rajesh

2017-11-08

This study demonstrates significant visible light photo-detection capability of pristine ZnO nanostructure thin films possessing substantially high percentage of oxygen vacancies [Formula: see text] and zinc interstitials [Formula: see text], introduced by simple tuning of economical solution method. The demonstrated visible light photo-detection capability, in addition to the inherent UV light detection ability of ZnO, shows great dependency of [Formula: see text] and [Formula: see text] with the nanostructure morphology. The dependency was evaluated by analyzing the presence/percentage of [Formula: see text] and [Formula: see text] using photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS) measurements. Morphologies of ZnO viz. nanoparticles (NPs), nanosheets (NSs) and nanoflowers (NFs), as a result of tuning of synthesis method contended different concentrations of defects, demonstrated different photo-detection capabilities in the form of a thin film photodetector. The photo-detection capability was investigated under different light excitations (UV; 380~420 nm, white ; λ > 420 nm and green; 490~570 nm). The as fabricated NSs photodetector possessing comparatively intermediate percentage of [Formula: see text] ~ 47.7% and [Formula: see text] ~ 13.8% exhibited superior performance than that of NPs and NFs photodetectors, and ever reported photodetectors fabricated by using pristine ZnO nanostructures in thin film architecture. The adopted low cost and simplest approach makes the pristine ZnO-NSs applicable for wide-wavelength applications in optoelectronic devices.

Degradation of flumequine by the Fenton and photo-Fenton processes: Evaluation of residual antimicrobial activity

Energy Technology Data Exchange (ETDEWEB)

Rodrigues-Silva, Caio; Maniero, Milena Guedes [School of Civil Engineering, Architecture and Urbanism, University of Campinas — UNICAMP, P.O. Box 6021, CEP 13083-852, Campinas, SP (Brazil); Rath, Susanne [Chemistry Institute, University of Campinas — UNICAMP, P.O. Box 6154, CEP 13084-971, Campinas, SP (Brazil); Guimarães, José Roberto, E-mail: jorober@fec.unicamp.br [School of Civil Engineering, Architecture and Urbanism, University of Campinas — UNICAMP, P.O. Box 6021, CEP 13083-852, Campinas, SP (Brazil)

2013-02-15

Flumequine is a broad-spectrum antimicrobial agent of the quinolone class, and it is widely used as a veterinary drug in food-producing animals. The presence of flumequine in the environment may contribute to the development of drug resistant bacterial strains. In this study, water samples fortified with flumequine (500 μg L{sup −1}) were degraded using the Fenton and photo-Fenton processes. The maximum degradation efficiency for flumequine by the Fenton process was approximately 40% (0.5 mmol L{sup −1} Fe(II), 2.0 mmol L{sup −1} H{sub 2}O{sub 2} and 15 min). By applying UV radiation (photo-Fenton process), the efficiency reached more than 94% in 60 min when 0.25 mmol L{sup −1} Fe(II) and 10.0 mmol L{sup −1} H{sub 2}O{sub 2} were used. Under these conditions, the Fenton process was able to reduce the biological activity, whereas the photo-Fenton process eliminated almost all of the antimicrobial activity because it was not detected. Four byproducts with an m/z of 244, 238, 220 and 202 were identified by mass spectrometry, and a degradation pathway for flumequine was proposed. The byproducts were derived from decarboxylation and defluorination reactions and from modifications in the alkylamino chain of the fluoroquinolone. - Highlights: ► Photo-Fenton process achieved the maximum performance, degrading 94% of flumequine. ► As the flumequine concentration decreased, antimicrobial activity also decreased. ► Four byproducts with m/z of 244, 238, 220 and 202 were identified. ► A degradation pathway for flumequine was proposed.

Photo-Curable Metal-Chelating Coatings Offer a Scalable Approach to Production of Antioxidant Active Packaging.

Science.gov (United States)

Lin, Zhuangsheng; Goddard, Julie

2018-02-01

Synthetic metal chelators (for example, ethylenediaminetetraacetic acid, EDTA) are widely used as additives to control trace transition metal induced oxidation in consumer products. To enable removal of synthetic chelators in response to increasing consumer demand for clean label products, metal-chelating active food packaging technologies have been developed with demonstrated antioxidant efficacy in simulated food systems. However, prior work in fabrication of metal-chelating materials leveraged batch chemical reactions to tether metal-chelating ligands, a process with limited industrial translatability for large-scale fabrication. To improve the industrial translatability, we have designed a 2-step laminated photo-grafting process to introduce metal chelating functionality onto common polymeric packaging materials. Iminodiacetic acid (IDA) functionalized materials were fabricated by photo-grafting poly(acrylic acid) onto polypropylene (PP) films, followed by a second photo-grafting process to graft-polymerize an IDA functionalized vinyl monomer (GMA-IDA). The photo-grafting was conducted under atmospheric conditions and was completed in 2 min. The resulting IDA functionalized metal-chelating material was able to chelate iron and copper, and showed antioxidant efficacy against ascorbic acid degradation, supporting its potential to be used synergistically with natural antioxidants for preservation of food and beverage products. The 2-step photo-grafting process improves the throughput of active packaging coatings, enabling potential roll-to-roll fabrication of metal-chelating active packaging materials for antioxidant food packaging applications. To address consumer and retail demands for "clean label" foods and beverages without a corresponding loss in product quality and shelf life, producers are seeking next generation technologies such as active packaging. In this work, we will report the synthesis of metal-chelating active packaging films, which enable removal

Mystery photos: Christmas edition

CERN Multimedia

Alex Brown, Jens Vigen, Rosaria Marraffino

2014-01-01

Paraphrasing George R.R. Martin's novel Game of Thrones’ most famous quote: “Christmas is coming”. According to tradition, we’ve themed our last issue of the year to share the spirit of the festivities with our readers. We’ve collected some pictures of snowy scenes and Christmas parties at CERN from our archives.   Identifying pictures and albums in the CERN photo archive continues apace and we still need your help. However, in keeping with the holiday spirit, we’ve set you some Christmassy challenges. Were you at any of the events shown below, or do you recognise anyone in the pictures? Get in touch by email: photo.archive@cern.ch or use the “suggest a caption” link on each picture’s page. So far, more than 33,000 pictures have been uploaded, with nearly 1,000 old album records inspected and about 150 new ones created. We’ve had contact from an ever-increasing number of reti...

The effect of a paraffin screen on the neutron dose at the maze door of a 15 MV linear accelerator.

Science.gov (United States)

Krmar, M; Nikolić, D; Kuzmanović, A; Kuzmanović, Z; Ganezer, K

2013-08-01

The purpose of this study was to explore the effects of a paraffin screen located at various positions in the maze on the neutron dose equivalent at the maze door. The neutron dose equivalent was measured at the maze door of a room containing a 15 MV linear accelerator for x-ray therapy. Measurements were performed for several positions of the paraffin screen covering only 27.5% of the cross-sectional area of the maze. The neutron dose equivalent was also measured at all screen positions. Two simple models of the neutron source were considered in which the first assumed that the source was the cross-sectional area at the inner entrance of the maze, radiating neutrons in an isotropic manner. In the second model the reduction in the neutron dose equivalent at the maze door due to the paraffin screen was considered to be a function of the mean values of the neutron fluence and energy at the screen. The results of this study indicate that the equivalent dose at the maze door was reduced by a factor of 3 through the use of a paraffin screen that was placed inside the maze. It was also determined that the contributions to the dosage from areas that were not covered by the paraffin screen as viewed from the dosimeter, were 2.5 times higher than the contributions from the covered areas. This study also concluded that the contributions of the maze walls, ceiling, and floor to the total neutron dose equivalent were an order of magnitude lower than those from the surface at the far end of the maze. This study demonstrated that a paraffin screen could be used to reduce the neutron dose equivalent at the maze door by a factor of 3. This paper also found that the reduction of the neutron dose equivalent was a linear function of the area covered by the maze screen and that the decrease in the dose at the maze door could be modeled as an exponential function of the product φ·E at the screen.

The photo-dielectric effect in bio-systems and models

International Nuclear Information System (INIS)

Anitoff, Oleg Eric

1983-01-01

The first part of this thesis describes the photo-dielectric spectrometer, an original measurement set-up designed in order to enable the kinetic study of dielectric (or magnetic) relaxation in laser excited systems. In the second part, this new technique is applied to three systems: 1) thylakoid (the photo-electrochemically active part of the chloroplasts of green plants) and protochlorophyllide-protein complex: synchronous photo-dielectric effect, measure of the mean polarizability of laser excited states and of their degree of photonicity. 2) phases with electron traps: vitrified thylakoid (77K); chloro-aluminium chlorophthalocyanine: delayed photo-dielectric effect (RITDC) with memory effect in the former case. This effect results from the L-Fault stabilization of inverted hydrogenoid states e - L n H + , this hypothesis being further confirmed by the observation of the chemical activity of γ irradiated phosphate glasses (phosphorylative activity). These later systems can also be phonon activated at pH 8, thus opening the way to the quantitative analysis of the electro-vibronic interaction in chromophore-protein complexes. 3) Inverted micelles of Aerosol O.T.: thermodynamical and kinetic analysis of the structure of bounded water aggregates through photo-thermo-dielectric effect. (author) [fr

Double seal door design and analysis for ITER transfer cask

International Nuclear Information System (INIS)

Liu, C.L.; Yao, D.M.; Cheng, T.

2007-01-01

DSD (Double seal door) design concept was introduced. 3-D model work was performed for DSD in the three typical regions, such as upper port, equatorial port, divertor port. The numerical analysis for some typical components was done based on Finite Element (FE) method by using ANSYS code, especially for the optimization activities. The rescue procedures of the DSD was discussed which could benefit a little for future engineering implementation. The design and analysis work can support and be the important reference for future procurement. (authors)

Extensivering van de begeleiding door het inzetten van peer- en self-assessment in IMTO

NARCIS (Netherlands)

Joosten-ten Brinke, Desirée

2011-01-01

Joosten-ten Brinke, D. (2011). Extensivering van de begeleiding door het inzetten van peer- en self-Assessment in IMTO. In E. Bakker, W. Giesbertz, J. von Grumbkow, & T. Houtmans (Red.), Ontwikkeling van de onderzoekscompetentie aan de Open Universiteit (pp. 121-128). Heerlen: Open universiteit.

Photo-degradation behaviour of roseoflavin in some aqueous solutions

International Nuclear Information System (INIS)

Tyagi, A.; Penzkofer, A.; Mathes, T.; Hegemann, P.

2010-01-01

An absorption and emission spectroscopic characterization of roseoflavin (8-dimethylamino-8-demethyl-riboflavin, RoF) in aqueous solutions was carried out. The studies were concentrated on roseoflavin in pH 8 phosphate buffer. Absorption cross-section spectra, fluorescence excitation spectra, fluorescence quantum distributions, fluorescence quantum yields and fluorescence lifetimes were determined. The fluorescence of RoF is quenched by photo-induced intra-molecular charge-transfer at room temperature. The photo-degradation of RoF in un-buffered water, in Tris-HCl buffer, and in phosphate buffer was studied. Phosphate buffer and to a smaller extent Tris buffer catalyse the RoF photo-degradation. Photo-excitation of the primary photoproduct, 8-methylamino-riboflavin (8-MNH-RF), enhanced the RoF degradation by triplet 8-MNH-RF - singlet RoF excitation transfer with subsequent triplet-state RoF degradation.

Photo-degradation behaviour of roseoflavin in some aqueous solutions

Science.gov (United States)

Tyagi, A.; Penzkofer, A.; Mathes, T.; Hegemann, P.

2010-03-01

An absorption and emission spectroscopic characterization of roseoflavin (8-dimethylamino-8-demethyl-riboflavin, RoF) in aqueous solutions was carried out. The studies were concentrated on roseoflavin in pH 8 phosphate buffer. Absorption cross-section spectra, fluorescence excitation spectra, fluorescence quantum distributions, fluorescence quantum yields and fluorescence lifetimes were determined. The fluorescence of RoF is quenched by photo-induced intra-molecular charge-transfer at room temperature. The photo-degradation of RoF in un-buffered water, in Tris-HCl buffer, and in phosphate buffer was studied. Phosphate buffer and to a smaller extent Tris buffer catalyse the RoF photo-degradation. Photo-excitation of the primary photoproduct, 8-methylamino-riboflavin (8-MNH-RF), enhanced the RoF degradation by triplet 8-MNH-RF - singlet RoF excitation transfer with subsequent triplet-state RoF degradation.

Photo-degradation behaviour of roseoflavin in some aqueous solutions

Energy Technology Data Exchange (ETDEWEB)

Tyagi, A. [Institut II - Experimentelle und Angewandte Physik, Universitaet Regensburg, Universitaetsstrasse 31, D-93053 Regensburg (Germany); Penzkofer, A., E-mail: alfons.penzkofer@physik.uni-regensburg.de [Institut II - Experimentelle und Angewandte Physik, Universitaet Regensburg, Universitaetsstrasse 31, D-93053 Regensburg (Germany); Mathes, T.; Hegemann, P. [Institut fuer Biologie/Experimentelle Biophysik, Humboldt Universitaet zu Berlin, Invalidenstrasse 42, D-10115 Berlin (Germany)

2010-03-24

An absorption and emission spectroscopic characterization of roseoflavin (8-dimethylamino-8-demethyl-riboflavin, RoF) in aqueous solutions was carried out. The studies were concentrated on roseoflavin in pH 8 phosphate buffer. Absorption cross-section spectra, fluorescence excitation spectra, fluorescence quantum distributions, fluorescence quantum yields and fluorescence lifetimes were determined. The fluorescence of RoF is quenched by photo-induced intra-molecular charge-transfer at room temperature. The photo-degradation of RoF in un-buffered water, in Tris-HCl buffer, and in phosphate buffer was studied. Phosphate buffer and to a smaller extent Tris buffer catalyse the RoF photo-degradation. Photo-excitation of the primary photoproduct, 8-methylamino-riboflavin (8-MNH-RF), enhanced the RoF degradation by triplet 8-MNH-RF - singlet RoF excitation transfer with subsequent triplet-state RoF degradation.

Heterogeneous photo-Fenton oxidation with natural clays for phenol and tyrosol remediation

Directory of Open Access Journals (Sweden)

Djeffal L.

2013-09-01

Full Text Available Due to their excellent properties, clays have been widely used in several applications, particularly in catalysis. In this paper, three clays were used as heterogeneous photo-Fenton catalysts for phenol and tyrosol oxidations. Particular attention was given to the effect of the main operating conditions on the process performance. A total conversion was obtained for both organic pollutants with studied catalysts in 20 minutes reaction. For phenol, a total organic carbon (TOC conversion of 93% was obtained using sieved and calcined smectite clay. The TOC conversion was 60% for tyrosol with the same catalyst. Clays were characterized by chemical analysis, BET, XRD, TPR and SEM.

EOS Inoovation Photo's

International Nuclear Information System (INIS)

2011-01-01

What did four years of energy innovation bring the Netherlands? Which are the main lessons learned and what are the best opportunities for the market? The Energy Research Strategy programme (EOS) gave the answers to these questions for various topics in the form of images by means of so-called I nnovation Photos' on Biomass, Built Environment, Industrial Energy Efficiency, Smart Grids, Heat, Offshore Wind, and Solar PV. [nl

Method for improved selectivity in photo-activation of molecular agents

Science.gov (United States)

Fisher, Walter G.; Wachter, Eric A.; Dees, H. Craig

1998-01-01

A method for the treatment of a particular volume of plant or animal tissue comprising the steps of treating the plant or animal tissue with at least one photo-active molecular agent, wherein the particular volume of the plant or animal tissue retains at least a portion of the at least one photo-active molecular agent, and then treating the particular volume of the plant or animal tissue with light sufficient to promote a simultaneous two-photon excitation of at least one of the at least one photo-active molecular agent retained in the particular volume of the plant or animal tissue, wherein the at least one photo-active molecular agent becomes active in the particular volume of the plant or animal tissue. There is also disclosed a method for the treatment of cancer in plant or animal tissue and a method for producing at least one photo-activated molecular agent in a particular volume of a material.

Tertiary treatment of pulp mill wastewater by solar photo-Fenton

International Nuclear Information System (INIS)

Lucas, Marco S.; Peres, José A.; Amor, Carlos; Prieto-Rodríguez, Lucía; Maldonado, Manuel I.; Malato, Sixto

2012-01-01

Highlights: ► We firstly report a real pulp mill wastewater treatment by solar photo-Fenton in a CPC reactor. Fenton reagent experiments were tested firstly. ► Solar photo-Fenton presents excellent ability to treat the pulp mill wastewater. ► Experimental conditions were optimised. ► Biodegradability and toxicity tests (respirometry assays and BOD 5 /COD ratio) were performed during the wastewater treatment. ► A way to reduce the economic and environmental impact was evaluated. - Abstract: This work reports on pulp mill wastewater (PMW) tertiary treatment by Fenton (Fe 2+ /H 2 O 2 ) and solar photo-Fenton (Fe 2+ /H 2 O 2 /UV) processes in a pilot plant based on compound parabolic collectors (CPCs). Solar photo-Fenton reaction is much more efficient than the respective dark reaction under identical experimental conditions. It leads to DOC mineralisation, COD and total polyphenols (TP) removal higher than 90%. The solar photo-Fenton experiment with 5 mg Fe L −1 reaches 90% of DOC mineralisation with 31 kJ L −1 of UV energy and 50 mM of H 2 O 2 . The initial non-biodegradability of PMW, as shown by respirometry assays and BOD 5 /COD ratio, can be changed after a solar photo-Fenton treatment. Experiments with 20 and 50 mg Fe L −1 revealed that solar photo-Fenton can reach the same DOC degradation (90%), however, consuming less H 2 O 2 and time. Diluting the initial organic load to 50% also diminishes the dosage of H 2 O 2 and the necessary reaction time to achieve high DOC removals. Accordingly, solar photo-Fenton can be considered an alternative or complementary process to improve the performance of a biologic treatment and, subsequently, achieve legal limits on discharge into natural waters.

Photo-patch and patch tests in patients with dermatitis over the photo-exposed areas: A study of 101 cases from a tertiary care centre in India.

Science.gov (United States)

Sharma, Vinod Kumar; Bhari, Neetu; Wadhwani, Ashok Roopchand; Bhatia, Riti

2018-02-01

Many patients with dermatitis over photo-exposed body areas are positive to many contact allergens and have a pre-existing allergic contact dermatitis. This study included patients who presented to a tertiary centre in India with dermatitis on photo-exposed body areas suspected of chronic actinic dermatitis. Their detailed histories were recorded and cutaneous and systemic examinations were performed. Patch testing was done in all the patients and photo-patch testing was carried out in 86 patients. Altogether 101 patients were included (69 males, 32 females). The most common presentation was lichenified hyperpigmented plaques on the photo-exposed sites. Photosensitivity was recorded in 64 (63%) patients and summer exacerbation in 52 (52%). Exposure to the Parthenium hysterophorus weed was recorded in 70 (69%) patients, 27 (26.7%) had a history of hair dye application and 20 (20%) had a history of atopy. Photo-patch test was positive in 11 (12.8%) patients and patch testing was positive in 71 (70%). Parthenium hysterophorus was the most common allergen implicated and was positive in three (4%) photo-patch and 52 (52%) patch tests. Other positive photo-patch test allergens were perfume mix, balsam of Peru, thiuram mix, Compositae mix and promethazine hydrochloride. Other common patch test allergens were parthenolide, colophony, fragrance mix and p-phenylenediamine (PPD) base. In the Indian population parthenium and perfume mix are the most common photoallergens in patients with dermatitis over photo-exposed areas, while parthenium, colophony, fragrance mix and PPD are the common positive allergens. © 2016 The Australasian College of Dermatologists.

Cooperative photo-induced effects: from photo-magnetism under continuous irradiation to ultra-fast phenomena - study through optical spectroscopy and X-ray diffraction

International Nuclear Information System (INIS)

Glijer, D.

2006-12-01

The control with ultra-short laser pulses of the collective and concerted transformation of molecules driving a macroscopic state switching on an ultra-fast time scale in solid state opens new prospects in materials science. The goal is to realize at the material level what happens at the molecular level in femto-chemistry. These processes are highly cooperative and highly non-linear, leading to self-amplification and self-organization within the material, a so-called photo-induced phase transition with a new long range order (structural, magnetic, ferroelectric,...). Two families of molecular compounds have been studied here: first of all, spin transition materials changing from a diamagnetic state over to a paramagnetic state under the effect of temperature or under continuous laser excitation. It concerns photo-active molecular bi-stability prototype materials in solid state, whose switching has been studied during X-ray diffraction, optical reflectivity and magnetism experiments. Then we have studied charge-transfer molecular systems, prototype compounds for ultrafast photo-induced phase transitions: insulator-metal, neutral-ionic....As well as ultrafast optical experiments, time-resolved X ray crystallography is a key technique in order to follow at the atomic level the different steps of the photo-induced transformation and thus to observe the involved mechanisms. We have underlined a process of photo-formation of one-dimensional nano-domains of lattice-relaxed charge-transfer excitations, governing the photo-induced phase transition of the molecular charge-transfer complex TTF-CA by the first time-resolved diffuse scattering measurements. Moreover, a new femtosecond laser-plasma source and a optical pump-probe spectroscopy set-up with a highly sensitive detecting system have been developed in this work. The results presented here will be an illustration of the present scientific challenges existing on the one hand with the development of projects of major

ANALISA FATIGUE KEKUATAN STERN RAMP DOOR AKIBAT BEBAN DINAMIS PADA KM. KIRANA I DENGAN METODE ELEMEN HINGGA DISKRIT ELEMEN SEGITIGA PLANE STRESS

Directory of Open Access Journals (Sweden)

Sarjito Jokosisworo

2012-04-01

Full Text Available Kapal KM. Kirana I adalah kapal tipe Ro - Ro Passanger Ship yang beroperasi di Pulau Jawa dengan rute pelayaran Pelabuhan Semarang - Sampit yang mampu mengangkut penumpang dan kendaraan dalam jumlah yang relatif banyak. Untuk memudahkan akses keluar masuk kendaraan yang akan diangkut, maka kapal ini dilengkapi dengan sebuah ramp door sistem steel wire rope yang terletak di bagian buritan kapal (stern ramp door. Ramp door akan menerima beban dinamis secara berulang-ulang sehingga mengakibatkan kelelahan material (fatigue. Analisa fatigue konstruksi rampdoor dilakukan dengan menggunakan metode elemen hingga diskrit segitiga plane stress dengan tujuan untuk mendapatkan hasil analisa yang lebih akurat. Pemodelan dilakukan dengan menggunakan program bantu berbasis CAD, sedangkan untuk analisa fatigue menggunakan program berbasis elemen hingga. Analisa  yang digunakan adalah analisa beban dinamis dengan amplitudo berubah berdasarkan variasi 4 beban kendaran. Untuk mengetahui letak kondisi paling kritis rampdoor dibagi menjadi 3 bagian dengan mengambil lokasi pnode 180, 140, dan 100. Berdasarkan hasil analisa didapat umur ramp door selama 3186 siklus atau 2 tahun 9 bulan 4 hari dan mempunyai nilai intensitas tegangan patah sebenarnya sebesar 400,713 Mpa. 

Bluetooth enables in-door mobile location services

DEFF Research Database (Denmark)

Thongthammachart, Saowanee; Olesen, Henning

2003-01-01

Several technologies can be applied to enable mobile location services, but most of them suffer from limited accuracy and availability. GPS can solve the problem of determining the location of users in most outdoor situations, but an end-user position inside a building cannot be pinpointed. Other...... mobile location techniques can also provide the user's position, but the accuracy is rather low. In order to improve the accuracy and make location-based services really attractive, existing approaches must be supplemented by new technologies. Wireless short-range technologies like Bluetooth could...... be candidates for solving these problems. This paper shows that Bluetooth can act as a key enabler of mobile location services in an in-door environment. The advantage of Bluetooth technology is, that it can provide rather precise location data inside a building or hotspot area, while the Bluetooth terminal...

Cold fusion: Need to keep door wide open

International Nuclear Information System (INIS)

Jones, S.E.

1992-01-01

Steven E. Jones of Brigham Young University in Provo, Utah, began work on cold fusion in 1986. Although insisting his work is markedly different from that of Stanley Pons and Martin Fleischmann at the nearby University of Utah, he nevertheless was tarred by the same brush that besmirched their sensational revelations in 1989. Whereas we were searching for tiny nuclear effects, they were looking for heat production, he explains. In no way, he insists, does his work substantiate the bold claims of heat generation by cold fusion in an electrochemical cell. In fact, Jones doublts Fleischmann and Pons' claims and sees evidence of either self-deception or hype in their actions. He adds, For useful energy production, thermonuclear (hot) fusion remains for more promising than that cold fusion claims of Pons and Fleischmann. But at the same time, Jones finds it necessary to appeal for tolerance for researchers brave enough to continue in the now unfashionable field of cold fusion

Global reach: international doors wide open to Canadians

International Nuclear Information System (INIS)

Lorenz, A.

2000-01-01

Opportunities available to Canadian companies abroad, particularly in the oil and gas field service sector, are reviewed. The overall conclusion is that while in some parts of the world, such as the Middle East negotiating contracts may be a challenge, the problem can be overcome by hiring a reliable local agent who speaks the language and is familiar with local business practices. The process is often time-consuming and requires a great deal of patience, but the opportunities are there to exploit. The excellent reputation of Canadian businessmen for for honesty and high quality of service makes it all possible

Global reach: international doors wide open to Canadians

Energy Technology Data Exchange (ETDEWEB)

Lorenz, A.

2000-05-01

Opportunities available to Canadian companies abroad, particularly in the oil and gas field service sector, are reviewed. The overall conclusion is that while in some parts of the world, such as the Middle East negotiating contracts may be a challenge, the problem can be overcome by hiring a reliable local agent who speaks the language and is familiar with local business practices. The process is often time-consuming and requires a great deal of patience, but the opportunities are there to exploit. The excellent reputation of Canadian businessmen for for honesty and high quality of service makes it all possible.

SRIM Scheme: An Impression-Management Scheme for Privacy-Aware Photo-Sharing Users

Directory of Open Access Journals (Sweden)

Fenghua Li

2018-02-01

Full Text Available With the development of online social networks (OSNs and modern smartphones, sharing photos with friends has become one of the most popular social activities. Since people usually prefer to give others a positive impression, impression management during photo sharing is becoming increasingly important. However, most of the existing privacy-aware solutions have two main drawbacks: ① Users must decide manually whether to share each photo with others or not, in order to build the desired impression; and ② users run a high risk of leaking sensitive relational information in group photos during photo sharing, such as their position as part of a couple, or their sexual identity. In this paper, we propose a social relation impression-management (SRIM scheme to protect relational privacy and to automatically recommend an appropriate photo-sharing policy to users. To be more specific, we have designed a lightweight face-distance measurement that calculates the distances between users’ faces within group photos by relying on photo metadata and face-detection results. These distances are then transformed into relations using proxemics. Furthermore, we propose a relation impression evaluation algorithm to evaluate and manage relational impressions. We developed a prototype and employed 21 volunteers to verify the functionalities of the SRIM scheme. The evaluation results show the effectiveness and efficiency of our proposed scheme. Keywords: Impression management, Relational privacy, Photo sharing, Policy recommendation, Proxemics

Alkydic resin wastewaters treatment by fenton and photo-Fenton processes

International Nuclear Information System (INIS)

Schwingel de Oliveira, Isadora; Viana, Lilian; Verona, Cenira; Fallavena, Vera Lucia Vargas; Azevedo, Carla Maria Nunes; Pires, Marcal

2007-01-01

Advanced oxidation processes are an emerging option to treatment of the painting industry effluents. The aim of this study was to compare the effectiveness of the Fenton and photo-Fenton processes in chemical oxygen demand (COD), total organic carbon (TOC) and phenolic compounds removal from wastewaters generated during alkydic resins manufacture. The optimized treatment conditions are the following: pH 3.0, 15.15 x 10 -3 mol L -1 FeSO 4 and 0.30 mol L -1 H 2 O 2 for a reaction time of 6 h. photo-Fenton experiments were carried out in the presence of sunlight or artificial radiation and complementary additions of H 2 O 2 were made for all experiments. The best results were obtained with photo-Fenton process assisted with solar radiation, with reductions of 99.5 and 99.1% of COD and TOC levels, respectively. Fenton and photo-Fenton (with artificial irradiation) processes presented lower but not insignificant removals, within 60-80% reduction for both COD and TOC. In addition, an excellent removal (95%) of total phenols was obtained using photo-Fenton process assisted with artificial irradiation. This study demonstrated that the use of photo-Fenton process on alkydic resins wastewater treatment is very promising especially when solar light is used

Development of a 13-in. Hybrid Avalanche Photo-Detector (HAPD) for a next generation water Cherenkov detector

International Nuclear Information System (INIS)

Nakayama, H.; Kusaka, A.; Kakuno, H.; Abe, T.; Iwasaki, M.; Aihara, H.; Shiozawa, M.; Tanaka, M.; Kyushima, H.; Suyama, M.; Kawai, Y.

2006-01-01

We have developed a 13-in. Hybrid Avalanche Photo-Detector (HAPD) for photosensors in next generation water Cherenkov type detectors. We study the performance of the HAPD and the results show good time resolution better than σ=1ns, good sensitivity for single photon detection, wide dynamic range, and good uniformity on the photocathode. The HAPD is also expected to be less expensive than large PMTs because of its simpler structure without dynodes

Morula-like cells in photo-symbiotic clams harboring zooxanthellae.

Science.gov (United States)

Nakayama, K; Nishijima, M; Maruyama, T

1998-06-01

Symbiosis is observed between zooxanthellae, symbiotic dinoflagellates, and giant clams and related clams which belong to the families Tridacnidae and Cardiidae. We have previously shown that a photo-symbiotic clam Tridacna crocea has three types of hemocytes, the eosinophilic granular hemocyte with phagocytic activity, the agranular cell with electron lucent granules, and the morula-like cell with large (ca. 2 mum in diameter) colorless granules. The function of the morula-like cell is not clear, but it has not been reported in any other bivalves except photo-symbiotic clams T. crocea and Tridacna maxima. In order to clarify whether it is specific to photo-symbiotic clams or not, we studied hemocytes in the photo-symbiotic clams Tridacna derasa (Tridacnidae), Hippopus hippopus (Tridacnidae) and Corculum cardissa (Cardiidae), and a closely related non-symbiotic clam Fulvia mutica (Cardiidae). The eosinophilic granular hemocytes and the agranular cells were found in all of the clams examined. However, the morula-like cells which were packed with many large electron dense granules (ca. 2 mum in diameter), were observed only in the photo-symbiotic clams. In F. mutica, a closely related non-symbiotic clam, this type of hemocyte was not found. Instead a hemocyte with vacuoles and a few large granules containing peroxidase activity was observed. The large granules of F. mutica varied in size from ca. 1-9 mum in diameter. Present data suggests that the presence of morula-like cells is restricted to photo-symbiotic clams and that the hemocytes associated with the morula-like cells may have some functional relationship to symbiosis with zooxanthellae.

Container lid gasket protective strip for double door transfer system

Science.gov (United States)

Allen, Jr., Burgess M

2013-02-19

An apparatus and a process for forming a protective barrier seal along a "ring of concern" of a transfer container used with double door systems is provided. A protective substrate is supplied between a "ring of concern" and a safety cover in which an adhesive layer of the substrate engages the "ring of concern". A compressive foam strip along an opposite side of the substrate engages a safety cover such that a compressive force is maintained between the "ring of concern" and the adhesive layer of the substrate.

Ultradispersed Cobalt Ferrite Nanoparticles Assembled in Graphene Aerogel for Continuous Photo-Fenton Reaction and Enhanced Lithium Storage Performance.

Science.gov (United States)

Qiu, Bocheng; Deng, Yuanxin; Du, Mengmeng; Xing, Mingyang; Zhang, Jinlong

2016-07-04

The Photo-Fenton reaction is an advanced technology to eliminate organic pollutants in environmental chemistry. Moreover, the conversion rate of Fe(3+)/Fe(2+) and utilization rate of H2O2 are significant factors in Photo-Fenton reaction. In this work, we reported three dimensional (3D) hierarchical cobalt ferrite/graphene aerogels (CoFe2O4/GAs) composites by the in situ growing CoFe2O4 crystal seeds on the graphene oxide (GO) followed by the hydrothermal process. The resulting CoFe2O4/GAs composites demonstrated 3D hierarchical pore structure with mesopores (14~18 nm), macropores (50~125 nm), and a remarkable surface area (177.8 m(2 )g(-1)). These properties endowed this hybrid with the high and recyclable Photo-Fenton activity for methyl orange pollutant degradation. More importantly, the CoFe2O4/GAs composites can keep high Photo-Fenton activity in a wide pH. Besides, the CoFe2O4/GAs composites also exhibited excellent cyclic performance and good rate capability. The 3D framework can not only effectively prevent the volume expansion and aggregation of CoFe2O4 nanoparticles during the charge/discharge processes for Lithium-ion batteries (LIBs), but also shorten lithium ions and electron diffusion length in 3D pathways. These results indicated a broaden application prospect of 3D-graphene based hybrids in wastewater treatment and energy storage.

Electronegative plasma diagnostic by laser photo-detachment combined with negatively biased Langmuir probe

Science.gov (United States)

Oudini, N.; Sirse, N.; Taccogna, F.; Ellingboe, A. R.; Bendib, A.

2018-05-01

We propose a new technique for diagnosing negative ion properties using Langmuir probe assisted pulsed laser photo-detachment. While the classical technique uses a laser pulse to convert negative ions into electron-atom pairs and a positively biased Langmuir probe tracking the change of electron saturation current, the proposed method uses a negatively biased Langmuir probe to track the temporal evolution of positive ion current. The negative bias aims to avoid the parasitic electron current inherent to probe tip surface ablation. In this work, we show through analytical and numerical approaches that, by knowing electron temperature and performing photo-detachment at two different laser wavelengths, it is possible to deduce plasma electronegativity (ratio of negative ion to electron densities) α, and anisothermicity (ratio of electron to negative ion temperatures) γ-. We present an analytical model that links the change in the collected positive ion current to plasma electronegativity and anisothermicity. Particle-In-Cell simulation is used as a numerical experiment covering a wide range of α and γ- to test the new analysis technique. The new technique is sensitive to α in the range 0.5 1.

Photo-crosslinking induced geometric restriction controls the self-assembly of diphenylalanine based peptides

International Nuclear Information System (INIS)

Tie Zuoxiu; Qin Meng; Zou Dawei; Cao Yi; Wang Wei

2011-01-01

The diphenylalanine (FF) motif has been widely used in the design of peptides that are capable of forming various ordered structures, such as nanotubes, nanospheres and hydrogels. In these assemblies, FF based peptides adopt an antiparallel structure and are stabilized by π-π stacking among the phenyl groups. Here we show that assembly of FF-based peptides can be controlled by their geometric restrictions. Using tripeptide FFY (L-Phe-L-Phe-L-Tyr) as an example, we demonstrate that photo-crosslinking of C-terminal tyrosine can impose a geometric restriction to the formation of an antiparallel structure, leading to a structural change of the assemblies from nanosphere to amorphous. This finding is confirmed using far-UV circular dichroism, Fourier transform infrared spectroscopy and atomic force microscopy. Based on such a mechanism, we are able to control the gel-sol transition of Fmoc-FFY using the geometric restriction induced by photo-crosslinking of C-terminal tyrosine groups. We believe that geometric restriction should be considered as an important factor in the design of peptide-based materials. It can also be implemented as a useful strategy for the construction of environment-responsive 'smart' materials. (authors)

High throughput photo-oxidations in a packed bed reactor system.

Science.gov (United States)

Kong, Caleb J; Fisher, Daniel; Desai, Bimbisar K; Yang, Yuan; Ahmad, Saeed; Belecki, Katherine; Gupton, B Frank

2017-12-01

The efficiency gains produced by continuous-flow systems in conducting photochemical transformations have been extensively demonstrated. Recently, these systems have been used in developing safe and efficient methods for photo-oxidations using singlet oxygen generated by photosensitizers. Much of the previous work has focused on the use of homogeneous photocatalysts. The development of a unique, packed-bed photoreactor system using immobilized rose bengal expands these capabilities as this robust photocatalyst allows access to and elaboration from these highly useful building blocks without the need for further purification. With this platform we were able to demonstrate a wide scope of singlet oxygen ene, [4+2] cycloadditions and heteroatom oxidations. Furthermore, we applied this method as a strategic element in the synthesis of the high-volume antimalarial artemisinin. Copyright © 2017. Published by Elsevier Ltd.

Next to Leading Logarithms and the PHOTOS Monte Carlo

CERN Document Server

Golonka, P

2007-01-01

With the approaching start-up of the experiments at LHC, the urgency to quantify systematic uncertainties of the generators, used in the interpretation of the data, is becoming pressing. The PHOTOS Monte Carlo program is often used for the simulationof experimental, selection-sensitive, QED radiative corrections in decays of Z bosons and other heavy resonances and particles. Thanks to its complete phase-space coverage it is possible, with no approximations for any decay channel, to implement the matrix-element. The present paper will be devoted to those parts of the next-to-leading order corrections for Z decays which are normally missing in PHOTOS. The analytical form of the exact and truncated (standard) kernel used in PHOTOS will be explicitly given. The correction, being the ratio of the exact to the approximate kernel, can be activated as an optional contribution to the internal weight of PHOTOS. To calculate the weight, the information on the effective Born-level Z/gamma* couplings and even directions o...

Soft photo structuring of porous silicon in water

Energy Technology Data Exchange (ETDEWEB)

Juan, M.; Bouillard, J.S.; Plain, J.; Bachelot, R.; Adam, P.M.; Lerondel, G.; Royer, P. [ICD - Laboratoire de Nanotechnologie et d' Instrumentation Optique, CNRS FRE 2848, Universite de Technologie de Troyes, 12 rue Marie Curie, BP 2060, 10010 Troyes (France)

2007-05-15

We report on local photo-induced patterning of porous silicon in water. Scanning probe microscopy images of the sample surface after illumination show that the emission properties as well as the topography are modified according to the interferometric illumination pattern. Local photo-oxidation is believed to be at the origin of these modifications. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Introducing New Library Services: Nuclear Malaysia Gallery Photos and Videos

International Nuclear Information System (INIS)

Mohd Hafizal Yusof; Nasaruddin Ahmad; Habibah Adnan

2015-01-01

The main purpose of the existing of library is to preserve books and journals for the organizations main business. The role of library itself is to organize the books such as borrowing and renewal services as consulting their customers on getting the best references for the customers need and demand. Nowadays, the role of library also expands and the need for storing and preserving non-monograph resources such as photo and video also increase. Follow that current situation, Nuclear Malaysia's Library also take a step forwards by introducing new services so called Photo and Video Gallery. Realizing that Nuclear Malaysia also have their valuable photo and video that contains so called memorable moment and must be preserve for future reference, the management of Nuclear Malaysia's Library have decided to buy the system so called P-Canvas. The main purpose of this paper is to explain the library new services, Photo and Video Gallery, development and advantage of this system in storing and preserving Nuclear Malaysia's photo and video. (author)

Photos of Slapped-Cheek Rash

Science.gov (United States)

... Search Form Controls Cancel Submit Search The CDC Parvovirus B19 and Fifth Disease Note: Javascript is disabled or ... this page: About CDC.gov . Parvovirus Home About Parvovirus B19 Fifth Disease Pregnancy and Fifth Disease Photos of ...

China opens the door

Energy Technology Data Exchange (ETDEWEB)

Starke, K.

1997-01-01

The door to China`s vast market for power generation was opened a bit further for foreign firms in November. That is when power ministry head Shi Dazhen said the country would rely on overseas investors for 20 percent of the funding needed to boost output--double the amount foreigners were previously allowed to contribute. Through 1995, foreigners invested $12.2 billion in China`s electricity industry, accounting for 10 percent of total investment. According to Shi, foreign investors will be asked to provide about $17 billion of the $84 billion China plans to invest in the sector over the next five years. Under China`s Ninth Five-Year Plan (1996-2000), the government aims to boost the country`s power generation capacity at the rate of 15,000 MW to 20,000 MW annually by the year 2000. Since China`s public external debt balance already exceeds $80 billion, however, the government would seem to have little choice but to allow foreigners a greater role. Shi also said that foreigners would be allowed 100 percent ownership of PRC power projects. This is discouraged under China`s current industry guidelines. It is, however, expected to be permitted under China`s first build-operate-transfer (BOT) law, which was anticipated by the end of 1996, says Susan Urkevich, director of project finance at HSBC Investment Bank Asia in Hong Kong. Indeed, China`s first BOT is already happening.

A novel categorisation system to organise a large photo ...

African Journals Online (AJOL)

The white shark Carcharodon carcharias was one of the first elasmobranch species where photo identification was used to identify unique individuals. In this study, we propose guidelines that improve the current photo identification technique for white sharks by presenting a novel categorisation system. Using this method, a ...

Japanese and Korean Kindergartners' Perspectives of Play Using Photos

Science.gov (United States)

Izumi-­Taylor, Satomi; Ro, Yeonsun; Han, Jihee; Ito, Yoko

2017-01-01

The purpose of the study was to examine Japanese and Korean kindergarteners' perspectives by asking them to photograph play and explain why their photos represent play (photo elicitation interviews). The participants consisted of 50 kindergarteners on Japan's main island and 50 kindergarteners in South Korea. Japanese and Korean kindergartners…

Tertiary treatment of pulp mill wastewater by solar photo-Fenton

Energy Technology Data Exchange (ETDEWEB)

Lucas, Marco S., E-mail: mlucas@utad.pt [Centro de Quimica de Vila Real, Universidade de Tras-os-Montes e Alto Douro, Apartado 1013, 5001-801 Vila Real (Portugal); Peres, Jose A.; Amor, Carlos [Centro de Quimica de Vila Real, Universidade de Tras-os-Montes e Alto Douro, Apartado 1013, 5001-801 Vila Real (Portugal); Prieto-Rodriguez, Lucia; Maldonado, Manuel I.; Malato, Sixto [Plataforma Solar de Almeria (CIEMAT), Carretera de Senes, Km 4, 04200, Tabernas, Almeria (Spain)

2012-07-30

Highlights: Black-Right-Pointing-Pointer We firstly report a real pulp mill wastewater treatment by solar photo-Fenton in a CPC reactor. Fenton reagent experiments were tested firstly. Black-Right-Pointing-Pointer Solar photo-Fenton presents excellent ability to treat the pulp mill wastewater. Black-Right-Pointing-Pointer Experimental conditions were optimised. Black-Right-Pointing-Pointer Biodegradability and toxicity tests (respirometry assays and BOD{sub 5}/COD ratio) were performed during the wastewater treatment. Black-Right-Pointing-Pointer A way to reduce the economic and environmental impact was evaluated. - Abstract: This work reports on pulp mill wastewater (PMW) tertiary treatment by Fenton (Fe{sup 2+}/H{sub 2}O{sub 2}) and solar photo-Fenton (Fe{sup 2+}/H{sub 2}O{sub 2}/UV) processes in a pilot plant based on compound parabolic collectors (CPCs). Solar photo-Fenton reaction is much more efficient than the respective dark reaction under identical experimental conditions. It leads to DOC mineralisation, COD and total polyphenols (TP) removal higher than 90%. The solar photo-Fenton experiment with 5 mg Fe L{sup -1} reaches 90% of DOC mineralisation with 31 kJ L{sup -1} of UV energy and 50 mM of H{sub 2}O{sub 2}. The initial non-biodegradability of PMW, as shown by respirometry assays and BOD{sub 5}/COD ratio, can be changed after a solar photo-Fenton treatment. Experiments with 20 and 50 mg Fe L{sup -1} revealed that solar photo-Fenton can reach the same DOC degradation (90%), however, consuming less H{sub 2}O{sub 2} and time. Diluting the initial organic load to 50% also diminishes the dosage of H{sub 2}O{sub 2} and the necessary reaction time to achieve high DOC removals. Accordingly, solar photo-Fenton can be considered an alternative or complementary process to improve the performance of a biologic treatment and, subsequently, achieve legal limits on discharge into natural waters.

Method for improved selectivity in photo-activation and detection of molecular diagnostic agents

Science.gov (United States)

Wachter, Eric A.; Fisher, Walter G.; Dees, H. Craig

1998-01-01

A method for the imaging of a particular volume of plant or animal tissue, wherein the plant or animal tissue contains at least one photo-active molecular agent. The method includes the steps of treating the particular volume of the plant or animal tissue with light sufficient to promote a simultaneous two-photon excitation of the photo-active molecular agent contained in the particular volume of the plant or animal tissue, photo-activating at least one of the at least one photo-active molecular agent in the particular volume of the plant or animal tissue, thereby producing at least one photo-activated molecular agent, wherein the at least one photo-activated molecular agent emits energy, detecting the energy emitted by the at least one photo-activated molecular agent, and producing a detected energy signal which is characteristic of the particular volume of plant or animal tissue. The present invention is also a method for the imaging of a particular volume of material, wherein the material contains at least one photo-active molecular agent.

Methods for improved selectivity in photo-activation and detection of molecular diagnostic agents

Science.gov (United States)

Wachter, Eric A [Oak Ridge, TN; Fisher, Walter G [Knoxville, TN; Dees, H Craig [Knoxville, TN

2008-03-18

A method for the imaging of a particular volume of plant or animal tissue, wherein the plant or animal tissue contains at least one photo-active molecular agent. The method comprises the steps of treating the particular volume of the plant or animal tissue with light sufficient to promote a simultaneous two-photon excitation of the photo-active molecular agent contained in the particular volume of the plant or animal tissue, photo-activating at least one of the at least one photo-active molecular agent in the particular volume of the plant or animal tissue, thereby producing at least one photo-activated molecular agent, wherein the at least one photo-activated molecular agent emits energy, detecting the energy emitted by the at least one photo-activated molecular agent, and producing a detected energy signal which is characteristic of the particular volume of plant or animal tissue. The present invention also provides a method for the imaging of a particular volume of material, wherein the material contains at least one photo-active molecular agent.

Suppression of persistent photo-conductance in solution-processed amorphous oxide thin-film transistors

Science.gov (United States)

Lee, Minkyung; Kim, Minho; Jo, Jeong-Wan; Park, Sung Kyu; Kim, Yong-Hoon

2018-01-01

This study offers a combinatorial approach for suppressing the persistent photo-conductance (PPC) characteristic in solution-processed amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) in order to achieve rapid photo-recovery. Various analyses were used to examine the photo-instability of indium-gallium-zinc-oxide (IGZO) TFTs including negative-bias-illumination-stress (NBIS) and transient photo-response behaviors. It was found that the indium ratio in metallic components had a significant impact on their PPC and photo-recovery characteristics. In particular, when the indium ratio was low (51.5%), the PPC characteristic was significantly suppressed and achieving rapid photo-recovery was possible without significantly affecting the electrical performance of AOSs. These results imply that the optimization of the indium composition ratio may allow achieving highly photo-stable and near PPC-free characteristics while maintaining high electrical performance of AOSs. It is considered that the negligible PPC behavior and rapid photo-recovery observed in IGZO TFTs with a lower indium composition are attributed to the less activation energy required for the neutralization of ionized oxygen vacancies.

Capturing Better Photos and Video with your iPhone

CERN Document Server

Thomas, J Dennis; Sammon, Rick

2011-01-01

Offers unique advice for taking great photos and videos with your iPod or iPhone!. Packed with unique advice, tips, and tricks, this one-of-a-kind, full-color reference presents step-by-step guidance for taking the best possible quality photos and videos using your iPod or iPhone. Top This unique book walks you through everything from composing a picture, making minor edits, and posting content to using apps to create more dynamic images. You'll quickly put to use this up-to-date coverage of executing both common and uncommon photo and video tasks on your mobile device.: Presents unique advice

Generation of High-Resolution Geo-referenced Photo-Mosaics From Navigation Data

Science.gov (United States)

Delaunoy, O.; Elibol, A.; Garcia, R.; Escartin, J.; Fornari, D.; Humphris, S.

2006-12-01

Optical images of the ocean floor are a rich source of data to understand biological and geological processes. However, due to the attenuation of light in sea water, the area covered by the optical systems is very reduced, and a large number of images are then needed in order to cover an area of interest, as individually they do not provide a global view of the surveyed area. Therefore, generating a composite view (or photo-mosaic) from multiple overlapping images is usually the most practical and flexible solution to visually cover a wide area, allowing the analysis of the site in one single representation of the ocean floor. In most of the camera surveys which are carried out nowadays, some sort of positioning information is available (e.g., USBL, DVL, INS, gyros, etc). If it is a towed camera an estimation of the length of the tether and the mother ship GPS reading could also serve as navigation data. In any case, a photo-mosaic can be build just by taking into account the position and orientation of the camera. On the other hand, most of the regions of interest for the scientific community are quite large (>1Km2) and since better resolution is always required, the final photo-mosaic can be very large (>1,000,000 × 1,000,000 pixels), and cannot be handled by commonly available software. For this reason, we have developed a software package able to load a navigation file and the sequence of acquired images to automatically build a geo-referenced mosaic. This navigated mosaic provides a global view of the interest site, at the maximum available resolution. The developed package includes a viewer, allowing the user to load, view and annotate these geo-referenced photo-mosaics on a personal computer. A software library has been developed to allow the viewer to manage such very big images. Therefore, the size of the resulting mosaic is now only limited by the size of the hard drive. Work is being carried out to apply image processing techniques to the navigated

Holographic interferometry using a digital photo-camera

International Nuclear Information System (INIS)

Sekanina, H.; Hledik, S.

2001-01-01

The possibilities of running digital holographic interferometry using commonly available compact digital zoom photo-cameras are studied. The recently developed holographic setup, suitable especially for digital photo-cameras equipped with an un detachable object lens, is used. The method described enables a simple and straightforward way of both recording and reconstructing of a digital holographic interferograms. The feasibility of the new method is verified by digital reconstruction of the interferograms acquired, using a numerical code based on the fast Fourier transform. Experimental results obtained are presented and discussed. (authors)

Technological Challenges for High-Brightness Photo-Injectors

CERN Multimedia

Suberlucq, Guy

2004-01-01

Many applications, from linear colliders to free-electron lasers, passing through light sources and many other electron sources, require high brightness electron beams, usually produced by photo-injectors. Because certain parameters of these applications differ by several orders of magnitude, various solutions were implemented for the design and construction of the three main parts of the photo-injectors: lasers, photocathodes and guns. This paper summarizes the different requirements, how they lead to technological challenges and how R&D programs try to overcome these challenges. Some examples of state-of-the-art parts are presented.

The IEA's review of France's energy policy: the challenge of opening the doors

International Nuclear Information System (INIS)

Appert, O.

2000-01-01

There has been a continuity in French energy policy for several decades now - the aim to guarantee a supply of energy under reliable, economical conditions. The review, which the International Energy Agency has just conducted, notes how successful this policy has been. But it also emphasizes the need for France to open the doors of this market to the rest of Europe. (authors)

Solar Power Ramp Events Detection Using an Optimized Swinging Door Algorithm: Preprint

Energy Technology Data Exchange (ETDEWEB)

Cui, Mingjian; Zhang, Jie; Florita, Anthony; Hodge, Bri-Mathias; Ke, Deping; Sun, Yuanzhang

2015-08-07

Solar power ramp events (SPREs) are those that significantly influence the integration of solar power on non-clear days and threaten the reliable and economic operation of power systems. Accurately extracting solar power ramps becomes more important with increasing levels of solar power penetrations in power systems. In this paper, we develop an optimized swinging door algorithm (OpSDA) to detection. First, the swinging door algorithm (SDA) is utilized to segregate measured solar power generation into consecutive segments in a piecewise linear fashion. Then we use a dynamic programming approach to combine adjacent segments into significant ramps when the decision thresholds are met. In addition, the expected SPREs occurring in clear-sky solar power conditions are removed. Measured solar power data from Tucson Electric Power is used to assess the performance of the proposed methodology. OpSDA is compared to two other ramp detection methods: the SDA and the L1-Ramp Detect with Sliding Window (L1-SW) method. The statistical results show the validity and effectiveness of the proposed method. OpSDA can significantly improve the performance of the SDA, and it can perform as well as or better than L1-SW with substantially less computation time.

The Glass Door: The Gender Composition of Newly-Hired Workers Across Hierarchical Job Levels

NARCIS (Netherlands)

Hassink, W.H.J.|info:eu-repo/dai/nl/090437411; Russo, G.|info:eu-repo/dai/nl/124883206

This paper examines the gender composition of the flow of new hirees along the organizational hierarchy of jobs. We find that women have a reduced chance to be hired at higher hierarchical levels. We refer to this phenomenon as the “glass door”. The glass door consists of an absolute and a relative

Deepest Wide-Field Colour Image in the Southern Sky

Science.gov (United States)

2003-01-01

LA SILLA CAMERA OBSERVES CHANDRA DEEP FIELD SOUTH ESO PR Photo 02a/03 ESO PR Photo 02a/03 [Preview - JPEG: 400 x 437 pix - 95k] [Normal - JPEG: 800 x 873 pix - 904k] [HiRes - JPEG: 4000 x 4366 pix - 23.1M] Caption : PR Photo 02a/03 shows a three-colour composite image of the Chandra Deep Field South (CDF-S) , obtained with the Wide Field Imager (WFI) camera on the 2.2-m MPG/ESO telescope at the ESO La Silla Observatory (Chile). It was produced by the combination of about 450 images with a total exposure time of nearly 50 hours. The field measures 36 x 34 arcmin 2 ; North is up and East is left. Technical information is available below. The combined efforts of three European teams of astronomers, targeting the same sky field in the southern constellation Fornax (The Oven) have enabled them to construct a very deep, true-colour image - opening an exceptionally clear view towards the distant universe . The image ( PR Photo 02a/03 ) covers an area somewhat larger than the full moon. It displays more than 100,000 galaxies, several thousand stars and hundreds of quasars. It is based on images with a total exposure time of nearly 50 hours, collected under good observing conditions with the Wide Field Imager (WFI) on the MPG/ESO 2.2m telescope at the ESO La Silla Observatory (Chile) - many of them extracted from the ESO Science Data Archive . The position of this southern sky field was chosen by Riccardo Giacconi (Nobel Laureate in Physics 2002) at a time when he was Director General of ESO, together with Piero Rosati (ESO). It was selected as a sky region towards which the NASA Chandra X-ray satellite observatory , launched in July 1999, would be pointed while carrying out a very long exposure (lasting a total of 1 million seconds, or 278 hours) in order to detect the faintest possible X-ray sources. The field is now known as the Chandra Deep Field South (CDF-S) . The new WFI photo of CDF-S does not reach quite as deep as the available images of the "Hubble Deep Fields

Characterisation of open-door electrical cabinet fires in compartments

Energy Technology Data Exchange (ETDEWEB)

Coutin, M., E-mail: mickael.coutin@irsn.fr; Plumecocq, W.; Zavaleta, P.; Audouin, L.

2015-05-15

Highlights: • Heat release rate of electrical cabinet fire source in a vitiated atmosphere. • Experimental database for proper validation the combustible modelling, taking into account the oxygen depletion in an enclosure. • New model for complex fire source. - Abstract: The study of electrical fires is a major concern for fire safety in the industry and more particularly for fire safety in nuclear facilities. To investigate this topic, IRSN conducted a large number of real-scale experiments involving open-door electrical cabinets burning firstly under a calorimetric hood and then inside a mechanically-ventilated compartment. The main challenges are to determine accurately the heat release rate of such a complex fire source in a vitiated atmosphere and to provide an experimental database for validating properly the combustible modelling, taking into account the oxygen depletion in an enclosure. After providing a detailed description of the fire scenarios and of the experimental apparatus, this paper focuses on the characteristic stages of the cabinet fire development, essentially based on the heat release rate time evolution of the fire. The effects of the confinement, of the outlet branch location, of the ventilation management and of the fire barrier on the fire source were then investigated. The reproducibility of electrical cabinet fires is also studied. A new model for complex fire source (applied in this study for open-door electrical cabinet fires) was then developed. This model was introduced in the zone code SYLVIA and the major features of the compartment fire experiments, such as characteristic heat release rate with effect of oxygen depletion and over-pressure peak were then calculated with a rather good agreement for this complex fire source (i.e. electrical cabinet)

GLOBAL INSTABILITY OF THE EXO-MOON SYSTEM TRIGGERED BY PHOTO-EVAPORATION

Energy Technology Data Exchange (ETDEWEB)

Yang, Ming; Xie, Ji-Wei; Zhou, Ji-Lin; Liu, Hui-Gen; Zhang, Hui, E-mail: jwxie@nju.edu.cn, E-mail: zhoujl@nju.edu.cn [School of Astronomy and Space Science and Key Laboratory of Modern Astronomy and Astrophysics in Ministry of Education, Nanjing University, 210093 (China)

2016-12-10

Many exoplanets have been found in orbits close to their host stars and thus they are subject to the effects of photo-evaporation. Previous studies have shown that a large portion of exoplanets detected by the Kepler mission have been significantly eroded by photo-evaporation. In this paper, we numerically study the effects of photo-evaporation on the orbital evolution of a hypothesized moon system around a planet. We find that photo-evaporation is crucial to the stability of the moon system. Photo-evaporation can erode the atmosphere of the planet thus leading to significant mass loss. As the planet loses mass, its Hill radius shrinks and its moons increase their orbital semimajor axes and eccentricities. When some moons approach their critical semimajor axes, global instability of the moon system would be triggered, which usually ends up with two, one or even zero surviving moons. Some lost moons could escape from the moon system to become a new planet orbiting the star or run away further to become a free-floating object in the Galaxy. Given the destructive role of photo-evaporation, we speculate that exomoons are less common for close-in planets (<0.1 au), especially those around M-type stars, because they are more X-ray luminous and thus enhancing photo-evaporation. The lessons we learn in this study may be helpful for the target selection of on-going/future exomoon searching programs.

Solar photo-catalysis to remove paper mill wastewater pollutants

Energy Technology Data Exchange (ETDEWEB)

Amat, A.M.; Arques, A. [Departamento de Ingenieria Textil y Papelera, Universidad Politecnica de Valencia, EPSA-UPV, Paseo del Viaducto 1, E-03801 Alcoy (Spain); Lopez, F. [Departamento de Ingenieria Quimica y Nuclear, Universidad Politecnica de Valencia, EPSA-UPV, Paseo del Viaducto 1, E-03801 Alcoy (Spain); Miranda, M.A. [Departamento de Quimica, Instituto de Tecnologia Quimica, Universidad Politecnica de Valencia, UPV-CSIC, 46071 Valencia (Spain)

2005-10-01

Solar degradation of effluents in board paper industries has been studied using different photo-catalysts: Fenton reagent and TiO{sub 2}. p-Toluenesulfonic acid was chosen as a model compound for sulfonated pollutants already present in the incoming waters. The abatement of a 0.005M solution of this pollutant after 6h was found to be 47% for photo-Fenton and 27% for TiO{sub 2} (pseudo-first-order rate constants 0.002 and 0.001min{sup -1}, respectively). Eugenol and guaiacol were chosen as models for lignin degradation products. They were efficiently degraded by both photo-catalysts, and reaction rates were higher for eugenol (0.0024min{sup -1}) than for guaiacol (0.0018min{sup -1}). A solution of sodium acetate, sodium butyrate and d-glucose was chosen to study the effect of photo-catalysis towards volatile fatty acids and saccharides arising from starch degradation. In this case a clearly worse performance was observed: only 20% degradation was observed after 7h of treatment. When the real wastewater was treated with photo-catalytic methods, the best performance was obtained in closed circuits, when the COD values were higher. This fact can be explained by taking into account that closure of the circuits results in an accumulation of reluctant phenolic pollutants, while starch derivatives are continuously degraded by microorganisms in the circuits; as phenolic compounds are more easily degraded by photo-catalytic means, these methods are suitable for closed circuits. Finally, changes in the BOD{sub st} were determined by means of active sludges respirometry. A noticeable BOD{sub st} increase (30-50%) was observed in all cases, attributable to chemical oxidation of biodegradable species. (author)

Photo-induced Mass Transport through Polymer Networks

Science.gov (United States)

Meng, Yuan; Anthamatten, Mitchell

2014-03-01

Among adaptable materials, photo-responsive polymers are especially attractive as they allow for spatiotemporal stimuli and response. We have recently developed a macromolecular network capable of photo-induced mass transport of covalently bound species. The system comprises of crosslinked chains that form an elastic network and photosensitive fluorescent arms that become mobile upon irradiation. We form loosely crosslinked polymer networks by Michael-Addition between multifunctional thiols and small molecule containing acrylate end-groups. The arms are connected to the network by allyl sulfide, that undergoes addition-fragmentation chain transfer (AFCT) in the presence of free radicals, releasing diffusible fluorophore. The networks are loaded with photoinitiator to allow for spatial modulation of the AFCT reactions. FRAP experiments within bulk elastomers are conducted to establish correlations between the fluorophore's diffusion coefficient and experimental variables such as network architecture, temperature and UV intensity. Photo-induced mass transport between two contacted films is demonstrated, and release of fluorophore into a solvent is investigated. Spatial and temporal control of mass transport could benefit drug release, printing, and sensing applications.

Radon concentrations in homes in an area of dolomite bedrock: Door County, Wisconsin

International Nuclear Information System (INIS)

Hawk, K.; Stieglitz, R.D.; Norman, J.C.

1993-01-01

A statewide survey by the Wisconsin Department of Health and Social Services with U.S.E.P.A. assistance reported an anomalously high percentage of homes in Door County with radon concentrations in excess of 20 pCi/L. The results were of interest because the county is underlain by marine sedimentary rocks rather than the igneous and metamorphic crystalline types usually associated with elevated radon concentrations. A voluntary population of 55 homes was tested for radon using activated charcoal canisters. This population was also asked to provide questionnaire response data on family, home, and socioeconomic aspects. The data were separated into socioeconomic, energy efficiency, radon access, and karst level categories and statistically analyzed. A subpopulation was selected from the larger population for detailed site investigation, which included additional in-home air testing and, at some sites, water supply analysis and in-ground testing for radon. The field investigations collected information on the geology, soil, topography, and home construction and use. The results of the investigation verified and characterized the radon occurrences in Door County. The presence or absence of karst features is shown to be statistically significant to radon levels. 23 refs., 5 figs., 3 tabs

Process of radiation damage in BaFX:Eu2+ (X=Br, I) photo-stimulable phosphor for imaging plate (IP)

International Nuclear Information System (INIS)

Kato, Munetaka; Takahashi, Kenji

2005-01-01

Imaging Plate (IP) is a 2-dimensional radiation detector utilizing photo-stimulable phosphors. Photo-stimulated luminescence (PSL) is a kind of process in radiation-induced reactions and IP can be repeatedly performed. The mechanism of PSL is reviewed and the radiation damage, which is a phenomenon that the luminescence goes down under X-ray irradiation, is also referred to. The relation between the composition of BaFX: Eu 2+ (X=Br, I), which is widely used in IPs, and the degree of radiation damage is investigated. The degree of radiation damage is smaller in the mixed crystal system of Br and I such as BaFBr 0.85 I 0.15 :Eu 2+ than in BaFBr: Eu 2+ and BaFI: Eu 2+ . This is explained by the characteristics of luminescence centers and F centers under X-ray irradiation. (author)

Near threshold TDCS for photo-double ionization of helium

International Nuclear Information System (INIS)

Dawber, G.; McConkey, A.G.; Rojas, H.; King, G.C.; MacDonald, M.A.

1995-01-01

TDCS for photo-double ionization of helium have been measured in a PhotoElectron-PhotoElectron COincidence (PEPECO) experiment. The TDCS have been obtained for the first time at very low excess energies E, 0.6 eV < E <2 eV, for both equal and unequal energy sharing between the two outgoing electrons. The measured data are compared with the predictions of the Wannier model, and also with recent, non-Wannier, ab initio calculations. In addition, also for the first time, the relative magnitudes of the various TDCS measured have been determined in this excess energy region, suggesting a departure from the predictions of the Wannier model at the largest excess energy studied, E = 2 eV. (Author)

Millisecond photo-thermal process on significant improvement of supercapacitor’s performance

International Nuclear Information System (INIS)

Wang, Kui; Wang, Jixiao; Wu, Ying; Zhao, Song; Wang, Zhi; Wang, Shichang

2016-01-01

Graphical abstract: A high way for charge transfer is created by a millisecond photo-thermal process which could decrease contact resistance among nanomaterials and improve the electrochemical performances. - Highlights: • Improve conductivity among nanomaterials with a millisecond photo-thermal process. • The specific capacitance can increase about 25% with an photo-thermal process. • The circle stability and rate capability can be improved above 10% with photo-thermal process. • Provide a new way that create electron path to improve electrochemical performance. - Abstract: Supercapacitors fabricated with nanomaterials usually have high specific capacitance and excellent performance. However, the small size of nanomaterials renders a considerable limitation of the contact area among nanomaterials, which is harmful to charge carrier transfer. This fact may hinder the development and application of nanomaterials in electrochemical storage systems. Here, a millisecond photo-thermal process was introduced to create a charge carries transfer path to decrease the contact resistance among nanomaterials, and enhance the electrochemical performance of supercapacitors. Polyaniline (PANI) nanowire, as a model nanomaterial, was used to modify electrodes under different photo-thermal process conditions. The modified electrodes were characterized by scanning electronic microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and the results were analysed by equivalent circuit simulation. These results demonstrate that the photo-thermal process can alter the morphology of PANI nanowires, lower the charge transfer resistances and thus improve the performance of electrodes. The specific capacitance increase of the modified electrodes is about 25%. The improvement of the circle stability and rate capability are above 10%. To the best of our knowledge, this is the first attempt on research the effect of photo-thermal process on the conductivity

Biodegradation of sulfamethoxazole photo-transformation products in a water/sediment test.

Science.gov (United States)

Su, Tong; Deng, Huiping; Benskin, Jonathan P; Radke, Michael

2016-04-01

Occurrence of the antibiotic sulfamethoxazole (SMX) in the aquatic environment is of concern due to its potential to induce antibiotic resistance in pathogenic bacteria. While degradation of SMX can occur by numerous processes, the environmental fate of its transformation products (TPs) remains poorly understood. In the present work, biodegradation of SMX photo-TPs was investigated in a water/sediment system. Photo-TPs were produced by exposing SMX to artificial sunlight for 48 h. The resulting mixture of 8 photo-TPs was characterized using a combination of ultra-high performance liquid chromatography coupled to high-resolution mass spectrometry and tandem mass spectrometry, and then used in biodegradation experiments. Significant differences in transformation among SMX photo-TPs were observed in the water/sediment system, with four photo-TPs displaying evidence of biodegradation (dissipation half-lives [DT50] of 39.7 d for 3-amino-5-methylisoxazole, 12.7 d for 4-nitro-sulfamethxoazole, 7.6 d for an SMX isomer and 2.4 d for [C10H13N3O4S]), two displaying primarily abiotic degradation (DT50 of 31 d for sulfanilic acid and 74.9 d for 5-methylisoxazol-3-yl-sulfamate), and two photo-TPs behaving largely recalcitrantly. Remarkably, TPs previously reported to be photo-stable also were persistent in biodegradation experiments. The most surprising observation was an increase in SMX concentrations when the irradiated solution was incubated, which we attribute to back-transformation of certain photo-TPs by sediment bacteria (85% from 4-nitro-sulfamethoxazole). This process could contribute to exposure to SMX in the aquatic environment that is higher than one would expect based on the fate of SMX alone. The results highlight the importance of considering TPs along with their parent compounds when characterizing environmental risks of emerging contaminants. Copyright © 2016 Elsevier Ltd. All rights reserved.

ATLAS TileCal Sub-Module Production at UIUC - Production Submodule Photos (current)

CERN Multimedia

Errede, Steve

2000-01-01

Step 4: Stacking and Gluing. Photo 6 - This is the glue robot, it is what we use to stack and glue the modules. Photo 7 - This is the computer progam we use to make the glue dots precise on the spacers and plates. Photo 8 - The Glue Robot in action. .

Photo-catalytic degradation of an oil-water emulsion using the photo-fenton treatment process: effects and statistical optimization.

Science.gov (United States)

Tony, Maha A; Purcell, P J; Zhao, Y Q; Tayeb, A M; El-Sherbiny, M F

2009-02-01

The application of advanced oxidation processes (AOPs) to the treatment of an effluent contaminated with hydrocarbon oils was investigated. The AOPs conducted were Fe2+/H2O2 (Fenton's reagent), Fe2+/H2O2/UV (Photo-Fenton's reagent) and UV-photolysis. These technologies utilize the very strong oxidizing power of hydroxyl radicals to oxidize organic compounds to harmless end products such as CO2 and H2O. A synthetic wastewater generated by emulsifying diesel oil and water was used. This wastewater might simulate, for example, a waste resulting from a hydrocarbon oil spill, onto which detergent was sprayed. The experiments utilising the Photo-Fenton treatment method with an artificial UV source, coupled with Fenton's reagent, suggest that the hydrocarbon oil is readily degradable, but that the emulsifying agent is much more resistant to degradation. The results showed that the COD (chemical oxygen demand) removal rate was affected by the Photo-Fenton parameters (Fe2+, H2O2 concentrations and the initial pH) of the aqueous solution. In addition, the applicability of the treatment method to a 'real' wastewater contaminated with hydrocarbon oil is demonstrated. The 'real' wastewater was sourced at a nearby car-wash facility located at a petroleum filling station and the experimental results demonstrate the effectiveness of the treatment method in this case. A statistical analysis of the experimental data using the Statistical Analysis System (SAS) and the response surface methodology (RSM) based on the experimental design was applied to optimize the Photo-Fenton parameters (concentrations of Fe2+, H2O2 and initial pH) and to maximize the COD removal rate (more than 70%).

STEREO PHOTO HYDROFEL, A PROCESS OF MAKING SAID STEREO PHOTO HYDROGEL, POLYMERS FOR USE IN MAKING SUCH HYDROGEL AND A PHARMACEUTICAL COMPRISING SAID POLYMERS

NARCIS (Netherlands)

Hiemstra, C.; Zhong, Zhiyuan; Feijen, Jan

2008-01-01

The Invention relates to a stereo photo hydrogel formed by stereo complexed and photo cross-linked polymers, which polymers comprise at least two types of polymers having at least one hydrophilic component, at least one hydrophobic mutually stereo complexing component, and at least one of the types

Study of variation of materials patients room's door related of neutron flux iradiation

Science.gov (United States)

Nirmalasari, Yuliana Dian; Suparmi, A.; Sardjono, Y.

2017-08-01

The treatment chamber of patients has been simulating with MCNPX Code. Optimation of simulation design of Irradiation chamber is corresponding to ISO standards for 30 MeV cyclotron generator. The simulation has used the variation of door's materials that was applied at treatment room's door. The variation of materials was Stainless Steel 202 and Pb, the thickness Pb and stainless steel 202 with the thickness were 2 cm, respectively. Neutron flux that was radiated to stainless steel 202 in the sequence was 3.34195 × 105 n . Cm-2 s-1 and 8.41568 × 104 n . Cm-2 s-1, while for Pb was 4.01349 × 105 n . Cm-2 s-1 and 2.58058 × 104 n . Cm-2 s-1. The further, neutron flux that was radiated to Pb and stainless steel 202 with the thickness were 4 cm in sequence was 4.00601 × 105 n . Cm-2 s-1 and 1.71713 × 104 n . Cm-2 s-1 for Pb, while for SS 202 was 3.09925 × 105 n . Cm-2 s-1. From this ratio we concluded that material Pb absorbed higher neutron flux than material Stainless Steel 202. On the other hand, the cost of Pb was more expensive than Stainless Steel 202. In addition, the material Stainless Steel 202 was obtaine more easily than the material Pb. There fore to overcome the economics problem, can try to build the door with stainless still 202 sheet and Pb sheet together. The further, the neutron dose with 2 cm of thickness was 7.69603 × 10-2 Gy and 2.10623 × 10-2 Gy for SS 202, while for Pb was 4.19444 × 10-2 Gy and 1.50581 × 10-2 Gy. While the neutron dose with 4 cm of thickness for SS 202 was 9.39602 × 10-2 Gy and for Pb was 4.46541 × 10-2 Gy and 1.50502 × 10-2 Gy. We recommend that this simulation should be further optimized.

Study and evaluation of radiometry in photo therapeutic treatment of the neonatal hyperbilirubinaemia

International Nuclear Information System (INIS)

Caly, Jose Pucci

2009-01-01

Phototherapy is a procedure established more than 50 years ago in the treatment of the newborn jaundice. However there is no a standard method to quantify the photo therapeutic dose in published clinical studies, hindering the comparison of previous studies on photo therapeutic effectiveness, as well as the establishment of safe and predictable doses. The photo therapeutic dose depends, among other factors, on the effective mean irradiance produced by the photo therapeutic unit. There are no standard procedures, however, neither to quantify the effective irradiance, nor to estimate the mean effective irradiance. As a consequence, large measurement variations in a same photo therapeutic unit are observed using different commercially available radiometers, as a consequence of the vast diversity of spectral responsivities of the instruments. An objective of this work was to adapt and to apply the bases of the wideband ultraviolet radiometry to quantify the available irradiance from photo therapeutic units, establishing procedures that allow us to compare measured irradiances from different sources, using radiometers presenting different spectral responsivities. Another objective was to characterize samples of photo therapeutic units commonly used, focusing the problem of the estimation of the effective mean irradiance from photo therapeutic units, proposing a method to estimate of the effective irradiance from focused sources. The experimental results allow us to conclude that it is not only necessary to standardize the photo therapeutic radiometry, but also the method of estimation of the effective mean irradiance. (author)

Dynamic Control of Adsorption Sensitivity for Photo-EMF-Based Ammonia Gas Sensors Using a Wireless Network

Directory of Open Access Journals (Sweden)

Yuriy Vashpanov

2011-11-01

Full Text Available This paper proposes an adsorption sensitivity control method that uses a wireless network and illumination light intensity in a photo-electromagnetic field (EMF-based gas sensor for measurements in real time of a wide range of ammonia concentrations. The minimum measurement error for a range of ammonia concentration from 3 to 800 ppm occurs when the gas concentration magnitude corresponds with the optimal intensity of the illumination light. A simulation with LabView-engineered modules for automatic control of a new intelligent computer system was conducted to improve measurement precision over a wide range of gas concentrations. This gas sensor computer system with wireless network technology could be useful in the chemical industry for automatic detection and measurement of hazardous ammonia gas levels in real time.

Photo-Crosslinking Induced Geometric Restriction Controls the Self-Assembly of Diphenylalanine Based Peptides

International Nuclear Information System (INIS)

Tie Zuo-Xiu; Qin Meng; Zou Da-Wei; Cao Yi; Wang Wei

2011-01-01

The diphenylalanine (FF) motif has been widely used in the design of peptides that are capable of forming various ordered structures, such as nanotubes, nanospheres and hydrogels. In these assemblies, FF based peptides adopt an antiparallel structure and are stabilized by π — π stacking among the phenyl groups. Here we show that assembly of FF-based peptides can be controlled by their geometric restrictions. Using tripeptide FFY (L-Phe-L-Phe-L-Tyr) as an example, we demonstrate that photo-crosslinking of C-terminal tyrosine can impose a geometric restriction to the formation of an antiparallel structure, leading to a structural change of the assemblies from nanosphere to amorphous. This finding is confirmed using far-UV circular dichroism, Fourier transform infrared spectroscopy and atomic force microscopy. Based on such a mechanism, we are able to control the gel-sol transition of Fmoc-FFY using the geometric restriction induced by photo-crosslinking of C-terminal tyrosine groups. We believe that geometric restriction should be considered as an important factor in the design of peptide-based materials. It can also be implemented as a useful strategy for the construction of environment-responsive 'smart' materials. (cross-disciplinary physics and related areas of science and technology)

Lanthanum fluoride upconverting nanoparticles for photo-biomodulation of cell function

Science.gov (United States)

Tek, Sumeyra; Vincent, Brandy K.; Mimun, L. Christopher; Tran, Ashley N.; Shrestha, Binita; Tang, Liang; Nash, Kelly L.

2017-02-01

Inorganic fluorescent nanoprobes have been widely used as passive agents for intracellular imaging for decades. An emerging field of research is the development of these contrast agents and using them actively in a way that they respond to external stimulation by inducing photo-chemical, thermal or mechanical actions that enable control and modulation over cell function. To achieve such control, methods which are remote, non-invasive and with low-thermal means of stimulation is preferable. Among a large variety of candidates, lanthanide doped upconverting nanoparticles (UCNPs) are one of the most interesting class of fluorescent materials. Non-scattering, low energy near infrared (NIR) light can be used for excitation of UCNPs as on-demand light sources resulting in emission peaks throughout the near-UV and visible wavelengths. Towards this goal, we developed nano-size, hydrophilic, non-toxic and biocompatible core-shell nanoparticles with enhanced upconversion intensity for photo-biomodulation studies. Under this approach, un-doped LaF3 (inert) shell and Yb3+ doped LaF3 (active) shell are grown on core LaF3:20% Yb, 2% Tm upconverting nanoparticles for enhanced luminescence for the first time with rapid microwave-assisted synthesis method that employs Polyvinylpyrrolidone (PVP) as biocompatible surfactant. The as-synthesized high efficiency UCNPs are analyzed through XRD, TEM, HRTEM, and Photoluminescence spectrum that is acquired under 980 nm laser excitation. Confocal microscopy is used to visualize nanoparticles in cells. The cellular response to NIR irradiation and upconverted light are visualized by luminescence microscopy.

Technology Opens Doors to Scientific Discovery, Portrait Unveiled of Former NLM Director Lindberg | NIH MedlinePlus the ...

Science.gov (United States)

... version of this page please turn JavaScript on. Technology Opens Doors to Scientific Discovery Past Issues / Spring 2016 Table of Contents Susannah Fox, chief technology officer of the U.S. Department of Health and ...

In vitro genotoxicity of neutral red after photo-activation and metabolic activation in the Ames test, the micronucleus test and the comet assay.

Science.gov (United States)

Guérard, Melanie; Zeller, Andreas; Singer, Thomas; Gocke, Elmar

2012-07-04

Neutral red (Nr) is relatively non-toxic and is widely used as indicator dye in many biological test systems. It absorbs visible light and is known to act as a photosensitizer, involving the generation of reactive oxygen species (type-I reaction) and singlet oxygen (type-II reaction). The mutagenicity of Nr was determined in the Ames test (with Salmonella typhimurium strains TA1535, TA97, TA98, TA98NR, TA100, and TA102) with and without metabolic activation, and with and without photo-activation on agar plates. Similarly to the situation following metabolic activation, photo-mutagenicity of Nr was seen with all Salmonella strains tested, albeit with different effects between these strains. To our knowledge, Nr is the only photo-mutagen showing such a broad action. Since the effects are also observed in strains not known to be responsive to ROS, this indicates that ROS production is not the sole mode of action that leads to photo-genotoxicity. The reactive species produced by irradiation are short-lived as pre-irradiation of an Nr solution did not produce mutagenic effects when added to the bacteria. In addition, mutagenicity in TA98 following irradiation was stronger than in the nitroreductase-deficient strain TA98NR, indicating that nitro derivatives that are transformed by bacterial nitroreductase to hydroxylamines appear to play a role in the photo-mutagenicity of Nr. Photo-genotoxicity of Nr was further investigated in the comet assay and micronucleus test in L5178Y cells. Concentration-dependent increases in primary DNA damage and in the frequency of micronuclei were observed after irradiation. Copyright © 2012 Elsevier B.V. All rights reserved.

Golden Jubilee photos: ISR - The first proton-proton interactions

CERN Document Server

2004-01-01

At the inauguration ceremony for the Intersecting Storage Rings (ISR) on 16 October 1971, the man in charge of their construction, Kjell Johnsen, presented the "key" to the machine to Edoardo Amaldi, President of Council. Seated on the stage with them for this symbolic event were Victor Weisskopf, Marcel Antonioz, Willy Jentschke (seen on the left of the photo) and Werner Heisenberg (on the far right). On 27 January that year, in a world premier, signals produced by proton-proton collisions had been observed at the ISR. The protons, supplied by the PS, were injected into two identical rings, each measuring 300 metres in diameter, and collided head on at the 8 points where the rings intersected. The installation, which remained in operation until 1984, gave physicists access to a wide range of energies for hadron physics, hitherto restricted to the data from cosmic ray studies. The many technological challenges that were met at the ISR, in the fields of vacuum technology and stochastic cooling for instance,...

De versterkte stad Zaltbommel. 900 jaar beschermd door wallen en muren

Directory of Open Access Journals (Sweden)

Gabri van Tussenbroek

2017-09-01

jaren 2003 tot 2015 een groot restauratieproject van de middeleeuwse stadsmuur is uitgevoerd, waarbij het hele object wél is gedocumenteerd en waarbij de resultaten van het onderzoek hebben bijdragen aan de keuzes die tijdens de restauratie moesten worden gemaakt. En niet alleen dat, de gemeente heeft er bovendien voor gekozen de bevindingen die het onderzoek heeft opgeleverd door middel van een forse publicatie toegankelijk te maken voor het publiek, aangevuld met nader literatuur- en archiefonderzoek, om de geschiedenis van stadsmuren, vesting en wallen zo compleet mogelijk in kaart te brengen.

Biodegradation of photo-oxidized lignite and characterization of the products

Science.gov (United States)

Li, Jiantao; Liu, Xiangrong; Yue, Zilin; Zhang, Yaowen

2018-01-01

Biodegradation of photo-oxidized Inner Mongolia lignite by pseudomonas aeruginosa was studied and the degradation percentage reached 56.27%, while the corresponding degradation percentage of the strain degrading raw Inner Mongolia lignite is only 23.16%. The degradation products were characterized. Proximate and ultimate analyses show that the higher oxygen content increased by photo-oxidation pretreatment maybe promoted the degradation process. Ultraviolet spectroscopy (UV) analysis of the liquid product reveals that it contains unsaturated structures and aromatic rings are the main structure units. Gas chromatography-mass spectrometry (GC-MS) analysis indicates that the main components of the ethyl acetate extracts are low molecular weight organic compounds, such as ketones, acids, hydrocarbons, esters and alcohols. Infrared spectroscopy (IR) analysis of raw lignite, photo-oxidized lignite and residual lignite demonstrates that the absorption peaks of functional groups in residual lignite disappeared or weakened obviously. Scanning electron microscopy (SEM) analysis manifests that small holes appear in photo-oxidized lignite surface, which may be promote the degradation process and this is only from the physical morphology aspects, so it can be inferred from the tests and analyses results that the more important reason of the high degradation percentage is mostly that the photo-oxidation pretreatment changes the chemical structures of lignite.

Fluorescent Photo-conversion: A second chance to label unique cells.

Science.gov (United States)

Mellott, Adam J; Shinogle, Heather E; Moore, David S; Detamore, Michael S

2015-03-01

Not all cells behave uniformly after treatment in tissue engineering studies. In fact, some treated cells display no signs of treatment or show unique characteristics not consistent with other treated cells. What if the "unique" cells could be isolated from a treated population, and further studied? Photo-convertible reporter proteins, such as Dendra2 , allow for the ability to selectively identify unique cells with a secondary label within a primary labeled treated population. In the current study, select cells were identified and labeled through photo-conversion of Dendra2 -transfected human Wharton's Jelly cells (hWJCs) for the first time. Robust photo-conversion of green-to-red fluorescence was achieved consistently in arbitrarily selected cells, allowing for precise cell identification of select hWJCs. The current study demonstrates a method that offers investigators the opportunity to selectively label and identify unique cells within a treated population for further study or isolation from the treatment population. Photo-convertible reporter proteins, such as Dendra2 , offer the ability over non-photo-convertible reporter proteins, such as green fluorescent protein, to analyze unique individual cells within a treated population, which allows investigators to gain more meaningful information on how a treatment affects all cells within a target population.

The influence of opening windows and doors on the natural ventilation rate of a residential building

Science.gov (United States)

Increased building energy efficiency is important in reducing national energy use and greenhouse gas emissions. An analysis of air change rates due to door and window openings in a research test house located in a residential environment are presented. These data inform developme...

Synthesis and photo-electrochemical properties of spinel-ferrite-coated hematite for solar water splitting

Science.gov (United States)

Selvaraj, Seenivasan; Moon, Hee; Kim, Do-Heyoung

2018-01-01

Photo-electrochemical water splitting with hematite photo-anodes under solar irradiation has attracted considerable attention as regards the production of renewable hydrogen energy. However, many challenges remain unresolved, as the full contribution of the catalytic over-layers has not been fully realized. Herein, we incorporate uniform spinel nickel-ferrite over-layers in hematite photo-anodes to obtain an improved understanding of the associated intrinsic changes. We achieve a 1.5-mA/cm2 photo-current density at 1.23 VRHE (RHE: reversible hydrogen electrode) under one-sun illumination conditions, along with a negative shift of 200 mV in the onset potential, for NiFe2O4-coated Sn-doped hematite photo-anodes. Fundamental electrochemical analyses clearly show that the shift in the onset potential is predominantly due to the enhanced photo-voltage development inside the hematite, rather than being purely caused by the interfacial kinetics. These insights reveal a new direction for fundamental research on photo-anodes towards fabrication of more efficient photo-anode systems.

Investigation of polypyrrole/polyvinyl alcohol–titanium dioxide composite films for photo-catalytic applications

Energy Technology Data Exchange (ETDEWEB)

Cao, Shaoqiang; Zhang, Hongyang; Song, Yuanqing; Zhang, Jianling; Yang, Haigang; Jiang, Long, E-mail: jianglong@scu.edu.cn; Dan, Yi, E-mail: danyichenweiwei@163.com

2015-07-01

Graphical abstract: - Highlights: • The study provides an easy and convenient method to fabricate films, which will give guidance for the preparation of three-dimensional materials. • The PPy/PVA–TiO{sub 2} films can keep better photo-catalytic activities both under UV and visible light irradiation when compared with TiO{sub 2} film. • There exist electron transfers between PPy/PVA and TiO{sub 2}. - Abstract: Polypyrrole/polyvinyl alcohol–titanium dioxide (PPy/PVA–TiO{sub 2}) composite films used as photo-catalysts were fabricated by combining TiO{sub 2} sol with PPy/PVA solution in which PPy was synthesized by in situ polymerization of pyrrole (Py) in polyvinyl alcohol (PVA) matrix and loaded on glass. The prepared photo-catalysts were investigated by X-ray diffraction (XRD), ultraviolet–visible diffuse reflection spectroscopy (UV–vis DRS), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectra and photoluminescence (PL). The results indicate that the composites have same crystal structure as the TiO{sub 2} and extend the optic absorption from UV region to visible light region. By detecting the variation ratio, detected by ultraviolet–vis spectroscopy, of model pollutant rhodamine B (RhB) solution in the presence of the composite films under both UV and visible light irradiation, the photo-catalytic performance of the composite films was investigated. The results show that the PPy/PVA–TiO{sub 2} composite films show better photo-catalytic properties than TiO{sub 2} film both under UV and visible light irradiation, and the photo-catalytic degradation of RhB follows the first-order kinetics. The effects of the composition of composite films and the concentration of RhB on the photo-catalytic performance, as well as the possible photo-catalytic mechanism, were also discussed. By photo-catalytic recycle experiments, the structure stability of the PPy/PVA–TiO{sub 2} composite film was investigated and the results show that

Limiting of photo induced changes in amorphous chalcogenide/alumino-silicate nanomultilayers

International Nuclear Information System (INIS)

Charnovych, S.; Nemec, P.; Nazabal, V.; Csik, A.; Allix, M.; Matzen, G.; Kokenyesi, S.

2011-01-01

Highlights: → Amorphous chalcogenides were investigated in this work. → Photo-induced effects were investigated in the created thin films. → Limiting of photo induced changes in amorphous chalcogenide/alumino-silicate nanomultilayers have been studied. - Abstract: Photo induced changes in amorphous As 20 Se 80 /alumino-silicate nanomultilayers (NML) produced by pulsed laser deposition (PLD) method have been studied in this work. The aim was to investigate the photo induced optical and surface relief changes due to the band gap illumination under the size- and hard cover limited conditions. It was observed that the hard cover layer on the surface of the uniform film or alumino-silicate sub-layers in the NML structure influences the photo darkening and restricts surface relief formations in As 20 Se 80 film or in the related NML compared with this effect in a pure chalcogenide layer. The influence of hard layers is supposed to be connected with limiting the free volume formation at the initial stage of the transformation process, which in turn limits the atomic movement and so the surface relief formation.

Door Security using Face Detection and Raspberry Pi

Science.gov (United States)

Bhutra, Venkatesh; Kumar, Harshav; Jangid, Santosh; Solanki, L.

2018-03-01

With the world moving towards advanced technologies, security forms a crucial part in daily life. Among the many techniques used for this purpose, Face Recognition stands as effective means of authentication and security. This paper deals with the user of principal component and security. PCA is a statistical approach used to simplify a data set. The minimum Euclidean distance found from the PCA technique is used to recognize the face. Raspberry Pi a low cost ARM based computer on a small circuit board, controls the servo motor and other sensors. The servo-motor is in turn attached to the doors of home and opens up when the face is recognized. The proposed work has been done using a self-made training database of students from B.K. Birla Institute of Engineering and Technology, Pilani, Rajasthan, India.

Reading Urban Environment by Photo: A Critical Tool for Socio ...

African Journals Online (AJOL)

Reading Urban Environment by Photo: A Critical Tool for Socio-Cultural Analyzing. ... Science, Technology and Arts Research Journal ... In the last decades usage of photos in landscape and urban design grow noticeably; yet applying it in architectural research or education for discovering social determinations needs more ...

Response function for the characterization of photo-induced anisotropy in azobenzene containing polymers

DEFF Research Database (Denmark)

Sajti, S.; Kerekes, Á.; Ramanujam, P.S.

2002-01-01

A response function is derived for the description of photo-induced birefringence and dichroism in case of materials where the underlying process is photo-isomerization. Our result explains the usefulness of the theoretical formulae derived earlier by Kakichashvili for photo-anisotropic materials...

Photo-polymerization of photocurable resins containing polyhedral oligomeric silsesquioxane methacrylate

International Nuclear Information System (INIS)

Lin, Ho-May; Wu, Shi-Yin; Chang, Feng-Chih; Yen, Ying-Chieh

2011-01-01

Photocurable resins, bisphenol A propoxylate glycerolate diacrylate (BPA-PGDA, containing two hydroxyl) and bisphenol A propoxylate diacrylate (BPA-PDA), with fixed photoinitiator (Irgacure 907) concentration and various contents of methacrylisobutyl polyhedral oligomeric silsesquioxane (MI-POSS) were prepared and characterized by FTIR spectroscopy, scanning electron microscope and differential photocalorimetry. The MI-POSS molecules form crystals or aggregated particles in the cured resin matrix. The BPA-PGDA series photocurable resins show higher viscosity and lower photo-polymerization reactivity than the BPA-PDA series resins. The photo-polymerization rate and conversion of BPA-PGDA series are improved with increasing MI-POSS content. On the contrary, the photo-polymerization behavior of BPA-PDA series photocurable resins remains nearly unchanged by the addition of MI-POSS. Hydrogen-bonding interaction between the hydroxyl of BPA-PGDA and the siloxane of MI-POSS tends to attract and concentrate these acrylate double bonds around MI-POSS particles and thus enhances the photo-polymerization rate and conversion.

Biscayne Bay Dolphin Photo ID System

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — It has been shown through a variety of photo-identification studies that populations of bottlenose dolphin inhabit the various embayments along the coast of Florida....

Development of analog solid-state photo-detectors for Positron Emission Tomography

International Nuclear Information System (INIS)

Bisogni, Maria Giuseppina; Morrocchi, Matteo

2016-01-01

Solid-state photo-detectors are one of the main innovations of past century in the field of sensors. First produced in the early forties with the invention of the p–n junction in silicon and the study of its optical properties, photo-detectors received a major boost in the sixties when the p-i-n (PIN) photodiode was developed and successfully used in several applications. The development of devices with internal gain, avalanche photodiodes (APD) first and then Geiger-mode avalanche photodiodes, named single photon avalanche diode (SPAD), leads to a substantial improvement in sensitivity and allowed single photon detection. Later on, thousands of SPADs have been assembled in arrays of few millimeters squared (named SiPM, silicon photo-multiplier) with single photon resolution. The high internal gain of SiPMs, together with other features peculiar of the silicon technology like compactness, speed and compatibility with magnetic fields, promoted SiPMs as the principal photo-detector competitor of photomultipliers in many applications from radiation detection to medical imaging. This paper provides a review of the properties of analog solid-state photo-detectors. Particular emphasis is given to latest advances on Positron Emission Tomography instrumentation boosted by the adoption of the silicon photo-detectors as an alternative to photomultiplier tubes (PMTs). Special attention is dedicated to the SiPMs, which are playing a key role in the development of innovative scanners.

Development of analog solid-state photo-detectors for Positron Emission Tomography

Energy Technology Data Exchange (ETDEWEB)

Bisogni, Maria Giuseppina, E-mail: giuseppina.bisogni@pi.infn.it; Morrocchi, Matteo

2016-02-11

Solid-state photo-detectors are one of the main innovations of past century in the field of sensors. First produced in the early forties with the invention of the p–n junction in silicon and the study of its optical properties, photo-detectors received a major boost in the sixties when the p-i-n (PIN) photodiode was developed and successfully used in several applications. The development of devices with internal gain, avalanche photodiodes (APD) first and then Geiger-mode avalanche photodiodes, named single photon avalanche diode (SPAD), leads to a substantial improvement in sensitivity and allowed single photon detection. Later on, thousands of SPADs have been assembled in arrays of few millimeters squared (named SiPM, silicon photo-multiplier) with single photon resolution. The high internal gain of SiPMs, together with other features peculiar of the silicon technology like compactness, speed and compatibility with magnetic fields, promoted SiPMs as the principal photo-detector competitor of photomultipliers in many applications from radiation detection to medical imaging. This paper provides a review of the properties of analog solid-state photo-detectors. Particular emphasis is given to latest advances on Positron Emission Tomography instrumentation boosted by the adoption of the silicon photo-detectors as an alternative to photomultiplier tubes (PMTs). Special attention is dedicated to the SiPMs, which are playing a key role in the development of innovative scanners.

Study of a photo-induced lysozyme-riboflavin bond

Energy Technology Data Exchange (ETDEWEB)

Ferrer, I; Silva, E

1985-01-01

Irradiation of lysozyme in the presence of riboflavin results in the formation of a lysozyme-riboflavin adduct. Reduction and carboxymethylation of the four disulfide bonds as well as the chemical modification of the Tyr residues and the photochemical alteration of the His residue in lysozyme, do not affect the formation of the photo-induced lysozyme-riboflavin bond. When the lysozyme-riboflavin adduct was subjected to mild acid hydrolysis and ion exchange chromatography, the retention of a compound containing /sup 14/C-riboflavin was observed. Free /sup 14/C-riboflavin, on the contrary is not retained by the column. The photo-oxidation of free Trp in the presence of /sup 14/C-riboflavin, gave a compound which bound to the ion exchange resin like the above-mentioned derivative. The photo-oxidation of the Trp residues in lysozyme and in peptides obtained from lysozyme showed very high quantum yields, and these values were directly related to the incorporation of /sup 14/C-riboflavin in these samples.

Study of a photo-induced lysozyme-riboflavin bond

International Nuclear Information System (INIS)

Ferrer, I.; Silva, E.

1985-01-01

Irradiation of lysozyme in the presence of riboflavin results in the formation of a lysozyme-riboflavin adduct. Reduction and carboxymethylation of the four disulfide bonds as well as the chemical modification of the Tyr residues and the photochemical alteration of the His residue in lysozyme, do not affect the formation of the photo-induced lysozyme-riboflavin bond. When the lysozyme-riboflavin adduct was subjected to mild acid hydrolysis and ion exchange chromatography, the retention of a compound containing 14 C-riboflavin was observed. Free 14 C-ribboflavin, on the contrary is not retained by the column. The photo-oxidation of free Trp in the presence of 14 C-riboflavin, gave a compound which bound to the ion exchange resin like the above-mentioned derivative. The photo-oxidation of the Trp residues in lysozyme and in peptides obtained from lysozyme showed very high quantum yields, and these values were directly related to the incorporation of 14 C-riboflavin in these samples. (orig.)

3D exploitation of large urban photo archives

Science.gov (United States)

Cho, Peter; Snavely, Noah; Anderson, Ross

2010-04-01

Recent work in computer vision has demonstrated the potential to automatically recover camera and scene geometry from large collections of uncooperatively-collected photos. At the same time, aerial ladar and Geographic Information System (GIS) data are becoming more readily accessible. In this paper, we present a system for fusing these data sources in order to transfer 3D and GIS information into outdoor urban imagery. Applying this system to 1000+ pictures shot of the lower Manhattan skyline and the Statue of Liberty, we present two proof-of-concept examples of geometry-based photo enhancement which are difficult to perform via conventional image processing: feature annotation and image-based querying. In these examples, high-level knowledge projects from 3D world-space into georegistered 2D image planes and/or propagates between different photos. Such automatic capabilities lay the groundwork for future real-time labeling of imagery shot in complex city environments by mobile smart phones.

Wave-guide type photo reactor for water purification

International Nuclear Information System (INIS)

Nobuaki, Negishi; Feng, He; Sadao, Matsuzawa; Koji, Takeuchi; Kayo, Ohno

2006-01-01

A wave-guide type photo-catalytic rod that is consisting of a glass tube with transparent TiO 2 (outside) and an optical wave-guide rod (inside) was designed and examined its performance. A model of polluted water, which contains 100 ppm of toluene or phenol, was taken in a 500 ml of beaker and the performance of this unit was evaluated by the removal rate of pollutants in water under photo-irradiation. Acrylic rod with 6-mm diameter was used as the wave-guide of light. One end of acrylic rod 50 mm had a frosted part or a screw thread for increasing seep out of the light. For the glass tube with transparent TiO 2 , four kinds with different film thickness were prepared by the dip-coating method. The wave-guide type photo-catalytic rods effectively eliminated toluene and phenol and the total amount of intermediates formation was low. (authors)

1944 AAF 661 Aerial Photo Index

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Aerial photographs are retrievable on a frame by frame basis. The aerial photo inventory contains imagery from various sources that are now archived at the Earth...

1943 AAF 332 Aerial Photo Index

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Aerial photographs are retrievable on a frame by frame basis. The aerial photo inventory contains imagery from various sources that are now archived at the Earth...

1944 AAF 547 Aerial Photo Index

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Aerial photographs are retrievable on a frame by frame basis. The aerial photo inventory contains imagery from various sources that are now archived at the Earth...

1944 AAF 649 Aerial Photo Index

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Aerial photographs are retrievable on a frame by frame basis. The aerial photo inventory contains imagery from various sources that are now archived at the Earth...

A Prototype RICH Detector Using Multi-Anode Photo Multiplier Tubes and Hybrid Photo-Diodes

CERN Document Server

Albrecht, E; Bibby, J H; Brook, N H; Doucas, G; Duane, A; Easo, S; Eklund, L; French, M; Gibson, V; Gys, Thierry; Halley, A W; Harnew, N; John, M; Piedigrossi, D; Rademacker, J; Simmons, B; Smale, N J; Teixeira-Dias, P; Toudup, L W; Websdale, David M; Wilkinson, G R; Wotton, S A

2001-01-01

The performance of a prototype Ring Imaging Cherenkov Detector is studied using a charged particle beam. The detector performance, using CF4 and air as radiators, is described. Cherenkov angle precision and photoelectron yield using hybrid photo-diodes and multi-anode PMTs agree with simulations and are assessed in terms of the requirements of the LHCb experiment.

The influence of opening windows and doors on the natural ventilation rate of a residential building

Science.gov (United States)

An analysis of air exchange rates due to intentional window and door openings in a research test house located in a residential environment is presented. These data inform the development of ventilation rate control strategies as building envelopes are tightened to improve the e...

Cooperative photo-induced effects: from photo-magnetism under continuous irradiation to ultra-fast phenomena - study through optical spectroscopy and X-ray diffraction; Effets photo-induits cooperatifs: du photomagnetisme sous irradiation continue aux phenomenes ultrarapides - etude par spectroscopie optique et diffraction X

Energy Technology Data Exchange (ETDEWEB)

Glijer, D

2006-12-15

The control with ultra-short laser pulses of the collective and concerted transformation of molecules driving a macroscopic state switching on an ultra-fast time scale in solid state opens new prospects in materials science. The goal is to realize at the material level what happens at the molecular level in femto-chemistry. These processes are highly cooperative and highly non-linear, leading to self-amplification and self-organization within the material, a so-called photo-induced phase transition with a new long range order (structural, magnetic, ferroelectric,...). Two families of molecular compounds have been studied here: first of all, spin transition materials changing from a diamagnetic state over to a paramagnetic state under the effect of temperature or under continuous laser excitation. It concerns photo-active molecular bi-stability prototype materials in solid state, whose switching has been studied during X-ray diffraction, optical reflectivity and magnetism experiments. Then we have studied charge-transfer molecular systems, prototype compounds for ultrafast photo-induced phase transitions: insulator-metal, neutral-ionic....As well as ultrafast optical experiments, time-resolved X ray crystallography is a key technique in order to follow at the atomic level the different steps of the photo-induced transformation and thus to observe the involved mechanisms. We have underlined a process of photo-formation of one-dimensional nano-domains of lattice-relaxed charge-transfer excitations, governing the photo-induced phase transition of the molecular charge-transfer complex TTF-CA by the first time-resolved diffuse scattering measurements. Moreover, a new femtosecond laser-plasma source and a optical pump-probe spectroscopy set-up with a highly sensitive detecting system have been developed in this work. The results presented here will be an illustration of the present scientific challenges existing on the one hand with the development of projects of major

USDA-ASCS 1936-1939 Air Photos

Data.gov (United States)

Minnesota Department of Natural Resources — This data set is a digital version of aerial photographs taken during the 1936-1939 time frame for the USDA-ASCS. These photos were originally recorded at a scale of...

AF Week in Photos > U.S. Air Force > Article Display

Science.gov (United States)

/Master Sgt. Charles Delano) PHOTO DETAILS / DOWNLOAD HI-RES 5 of 13 Crew chiefs with the Wyoming Air maximum limits to perform certain types of repairs. (U.S. Air National Guard photo/Master Sgt. Charles Eloy Alfaro International Airport in Manta, Ecuador, April 26, 2016. The portable tower will help local

Cs-K-Te photo cathodes: a promising electron source for free-electron lasers

NARCIS (Netherlands)

Bisero, D.; Bisero, D.; van Oerle, B.M.; van Oerle, B.M.; Ernst, G.J.; Verschuur, Jeroen W.J.; Witteman, W.J.

1998-01-01

The characteristics of Cs–K–Te photo-cathodes when used in a photo-cathode linear accelerator will be presented together with a short review of their photo-emissive properties. The cathodes have been illuminated by light pulses obtained by frequency quadrupling the light of a Nd:YLF laser. The

Potential active materials for photo-supercapacitor: A review

Science.gov (United States)

Ng, C. H.; Lim, H. N.; Hayase, S.; Harrison, I.; Pandikumar, A.; Huang, N. M.

2015-11-01

The need for an endless renewable energy supply, typically through the utilization of solar energy in most applications and systems, has driven the expansion, versatility, and diversification of marketed energy storage devices. Energy storage devices such as hybridized dye-sensitized solar cell (DSSC)-capacitors and DSSC-supercapacitors have been invented for energy reservation. The evolution and vast improvement of these devices in terms of their efficiencies and flexibilities have further sparked the invention of the photo-supercapacitor. The idea of coupling a DSSC and supercapacitor as a complete energy conversion and storage device arose because the solar energy absorbed by dye molecules can be efficiently transferred and converted to electrical energy by adopting a supercapacitor as the energy delivery system. The conversion efficiency of a photo-supercapacitor is mainly dependent on the use of active materials during its fabrication. The performances of the dye, photoactive metal oxide, counter electrode, redox electrolyte, and conducting polymer are the primary factors contributing to high-energy-efficient conversion, which enhances the performance and shelf-life of a photo-supercapacitor. Moreover, the introduction of compact layer as a primary adherent film has been earmarked as an effort in enhancing power conversion efficiency of solar cell. Additionally, the development of electrolyte-free solar cell such as the invention of hole-conductor or perovskite solar cell is currently being explored extensively. This paper reviews and analyzes the potential active materials for a photo-supercapacitor to enhance the conversion and storage efficiencies.

The Photo-Mosaic Assistant: Incorporating Historic Aerial Imagery into Modern Research Projects

Science.gov (United States)

Flathers, E.

2013-12-01

One challenge that researchers face as data organization and analysis shift into the digital realm is the incorporation of 'dirty' data from analog back-catalogs into current projects. Geospatial data collections in university libraries, government data repositories, and private industry contain historic data such as aerial photographs that may be stored as negatives, prints, and as scanned digital image files. A typical aerial imagery series is created by taking photos of the ground from an aircraft along a series of parallel flight lines. The raw photos can be assembled into a mosaic that represents the full geographic area of the collection, but each photo suffers from individual distortion according to the attitude and altitude of the collecting aircraft at the moment of acquisition, so there is a process of orthorectification needed in order to produce a planimetric composite image that can be used to accurately refer to locations on the ground. Historic aerial photo collections often need significant preparation for consumption by a GIS: they may need to be digitized, often lack any explicit spatial coordinates, and may not include information about flight line patterns. Many collections lack even such basic information as index numbers for the photos, so it may be unclear in what order the photos were acquired. When collections contain large areas of, for example, forest or agricultural land, any given photo may have few visual cues to assist in relating it to the other photos or to an area on the ground. The Photo-Mosaic Assistant (PMA) is a collection of tools designed to assist in the organization of historic aerial photo collections and the preparation of collections for orthorectification and use in modern research applications. The first tool is a light table application that allows a user to take advantage of visual cues within photos to organize and explore the collection, potentially building a rough image mosaic by hand. The second tool is a set of

Optimization studies of photo-neutron production in high-Z metallic ...

Indian Academy of Sciences (India)

Monte Carlo calculations have been performed using MCNP code to study the optimization of photo-neutron yield for different electron beam energies impinging on Pb, W and Ta cylindrical targets of varying thickness. It is noticed that photo-neutron yield can be increased for electron beam energies ≥ 100 MeV for ...

Tangible Cooperative Gestures: Improving Control and Initiative in Digital Photo Sharing

Directory of Open Access Journals (Sweden)

Elise van den Hoven

2015-09-01

Full Text Available This paper focuses on co-present digital photo sharing on a notebook and investigates how this could be supported. While analyzing the current digital photo sharing situation we noticed that there was a high threshold for visitors to take control of the personal computer of the photo owner, resulting in inequity of participation. It was assumed that visitors would have the opportunity to interact with the notebook more freely if this threshold was lowered by distributing the user interface and creating a more public, instead of personal, interaction space. This, in turn, could make them feel more involved and in control during a session, creating a more enjoyable experience. To test these assumptions a design prototype was created that stimulates participants to use tangible artifacts for cooperative gestures, a promising direction for the future of HCI. The situation with the cooperative gestures was compared with the regular digital photo sharing situation, which makes use of a keyboard. In dyads, visitors felt more involved and in control in the design prototype cooperative gestures condition (especially during storytelling, resulting in a more enjoyable digital photo sharing experience.

Quasi-free K+ photo-production in 12C

International Nuclear Information System (INIS)

Maeda, K.; Yamazaki, H.; Asano, S.; Emura, T.; Endo, I.; Endo, S.; Ito, S.; Itoh, H.; Ifuku, K.; Konno, O.; Koike, M.; Maruyama, K.; Niki, K.; Niwa, K.; Okuno, H.; Sakaguchi, A.; Sasaki, T.; Suda, T.; Sumi, Y.; Takeya, M.; Terasawa, T.; Uchida, H.; Yamashita, H.; Yoshida, K.

1994-01-01

Quasi-free K + photo-production in the 12 C(γ,K + ) reaction has been investigated in a photon energy range of 0.7-1.1GeV. Differential cross sections for the quasi-free process of the 12 C(γ,K + ) reaction have been obtained and they are compared with a calculation of a quasi-free K + photo-production. The effective proton number Z eff =4.2±0.6 obtained from the experiment was in good agreement with a calculation of a semi-classical attenuation model. ((orig.))

Titanium oxide modification with oxides of mixed cobalt valence for photo catalysis

International Nuclear Information System (INIS)

Alanis O, R.; Jimenez B, J.

2010-01-01

In the present work, heterogenous photo catalysis, a technique often used for organic compound degradation toxic in water, was used. The photo catalyst most often used in this technique is TiO 2 , which due to its physical and chemical properties, can degrade a great number of organic compounds. In addition, in recent years it has been verified that the doping of semiconductors with metals or metallic oxides increases the photo catalytic activity of these semiconductors, which is why it was proposed for doping by the impregnating method using commercial TiO 2 synthesized by the Degussa company (TiO 2 Degussa P25) with and oxide of mixed cobalt valence (Co 3 O 4 ) synthesized using the sol-gel method. The synthesized photo catalyst TiO 2 /Co 3 O 4 was characterized by the techniques of X-ray diffraction, scanning electronic microscopy, Raman spectroscopy and finally, photo catalytic tests by means of the degradation of methylene blue. (Author)

Evidence for photo-induced monoclinic metallic VO2 under high pressure

International Nuclear Information System (INIS)

Hsieh, Wen-Pin; Mao, Wendy L.; Trigo, Mariano; Reis, David A.; Andrea Artioli, Gianluca; Malavasi, Lorenzo

2014-01-01

We combine ultrafast pump-probe spectroscopy with a diamond-anvil cell to decouple the insulator-metal electronic transition from the lattice symmetry changing structural transition in the archetypal strongly correlated material vanadium dioxide. Coherent phonon spectroscopy enables tracking of the photo-excited phonon vibrational frequencies of the low temperature, monoclinic (M 1 )-insulating phase that transforms into the metallic, tetragonal rutile structured phase at high temperature or via non-thermal photo-excitations. We find that in contrast with ambient pressure experiments where strong photo-excitation promptly induces the electronic transition along with changes in the lattice symmetry, at high pressure, the coherent phonons of the monoclinic (M 1 ) phase are still clearly observed upon the photo-driven phase transition to a metallic state. These results demonstrate the possibility of synthesizing and studying transient phases under extreme conditions

A functional analysis of photo-object matching skills of severely retarded adolescents.

OpenAIRE

Dixon, L S

1981-01-01

Matching-to-sample procedures were used to assess picture representation skills of severely retarded, nonverbal adolescents. Identity matching within the classes of objects and life-size, full-color photos of the objects was first used to assess visual discrimination, a necessary condition for picture representation. Picture representation was then assessed through photo-object matching tasks. Five students demonstrated visual discrimination (identity matching) within the two classes of photo...

Trends of wood window and door consumption in Spain, France and Germany as elements of strategy for their export from Serbia

Directory of Open Access Journals (Sweden)

Ranković Nenad

2007-01-01

Full Text Available The paper gives results of the analysis of econometric models and trends of wood window and door consumption in Spain, France and Germany in the period 2008-2012. The results of the analysis are important for the process of creating export strategy for the chosen wood products from Serbia on the markets of the chosen countries. For each of the abovementioned markets, main recommendations in view of the possibilities for wood windows and doors export from Serbia are given, as well as the recommendations for the appearance of domestic producers on each of the chosen markets.

The doors have been removed… for YOUR safety

DEFF Research Database (Denmark)

Abildgaard, Mette Simonsen

on the classic box-shaped telephone booths, which had been a part of Danish communication infrastructure since 1932. But the doors were never reinstalled after the capture of the user, who became known as The Telephone Bomber, and a competition for a new open design was commissioned in 1980. The winning design......'s shape in fact made it inoperable for wheelchair-users. In contrast, the mayor of Copenhagen was fond of The Question Mark and vetoed alternative designs. Following several years of dispute, The Question Mark was installed in central Copenhagen, and Utzon Arkitekter, firm of Jørn Utzon, were commissioned...... to design a second open telephone booth. The Utzon-booth was ready in 1987, and received favourable reactions from the public on its design, which drew on the classic box-shape. I will present how, between human and nonhuman actors, in such different domains as politics, design, infrastructure and terror...

Globalization: an open door for the knowledge economy

Directory of Open Access Journals (Sweden)

Andreea MARIN-PANTELESCU

2009-12-01

Full Text Available Globalization refers to an emphasized process of global integration and spreading a set of ideas related to the economical activity and goods’ production, the premises being the liberalization of international commerce and the capital flows, the speeding up of the technological progress and informational society. The cognitive society is more and more obvious and unanimously accepted, which actually proves its efficiency. If traditional, conservative communities, which are not open to change and reject from the start anything new on the horizon, still exist today, they are isolated cases that will eventually be "converted" by this wave of information that has become indispensable to any development because in its absence resources could not be used efficiently. Taking into consideration these elements, this paper wishes to give arguments to the fact that globalization can be seen as being an open door for the cognitive society.

Large-aperture hybrid photo-detector

International Nuclear Information System (INIS)

Kawai, Y.; Nakayama, H.; Kusaka, A.; Kakuno, H.; Abe, T.; Iwasaki, M.; Aihara, H.; Tanaka, M.; Shiozawa, M.; Kyushima, H.; Suyama, M.

2007-01-01

We have developed the first complete large-aperture (13-inch diameter) hybrid photo-detector (HPD). The withstanding voltage problem has been overcome and we were able to attain an HPD operating voltage of +20 kV. Adoption of our newly developed backside illumination avalanche diode (AD) was also critical in successfully countering the additional problem of an increase in AD leakage after the activation process. We observed single photon signal timing jitter of under 450 ps in FWHM, electron transit time of ∼12 ns, and clear pulse height separation up to several photoelectron peaks, all greatly superior to the performance of any conventional large-aperture photomultiplier tubes (PMTs). In addition, our HPD has a much simpler structure than conventional large-aperture PMTs, which simplifies mass production and lowers manufacturing cost. We believe that these attributes position our HPD as the most suitable photo-detector for the next generation mega-ton class water-Cherenkov detector, which is expected to be more than 20x larger than the Super-Kamiokande (SK) detector

Study of the transparent electrode photo-galvano-voltaic cell

Energy Technology Data Exchange (ETDEWEB)

Zhi-chu, B.

1980-01-01

A simple photo-galvano-voltaic cell has been constructed by using a Nesa glass coated with SnO/sub 2/ on both sides as transparent electrodes, one of which is further coated with a photosensitizing dyestuff, meso-tetraphenylporphrin (TPP), forming the photo-cathode, and using an aqueous solution of thionine and Fe/sup + + +//Fe/sup + +/ redox couple as the electrolytic solution. By adding a surfactant, Na Lauryl sulfate, into the solution the surface resistance of the TPP film is greatly lowered, so that the photocurrent of the cell is markedly enhanced and the light conversion efficiency is increased more than twofold. It has been demonstrated that a multilayer liquid film photo-galvano-voltaic cell with film thickness less than 100 ..mu.. can greatly increase the light conversion efficiency, and the open-circuit voltage of more than two volts can be easily achieved.

Modelling the competition between photo-darkening and photo-bleaching effects in high-power ytterbium-doped fibre amplifiers

Science.gov (United States)

Jolly, A.; Vinçont, C.; Pierre, Ch.; Boullet, J.

2017-08-01

We propose an innovative, fully space-time model to take into account the seed-dependent nature of ageing penalties in high-power ytterbium-doped fibre amplifiers. Ageing is shown to be based on the on-going competition between photo-darkening and photo-bleaching phenomena. Our approach is based on the natural interplay between the excited states of co-existing ytterbium pairs and colour centres in highly doped fibres, in the presence of thermal coupling between the closely spaced excited states. As initiated from IR photons, the excitation of colour centres up to the UV band is supposed to be governed by multi-photon absorption. The interactions of interest in the kinetics of photo-bleaching then take the form of highly efficient charge transfers, which imply the reduction of some fraction of the basically trivalent ions to their divalent state. Due to the activation of ytterbium pairs by means of energy transfer up-conversion, these interactions get more and more effective at elevated operating powers. Computational results using these principles actually help to fit our experimental data regarding seeding effects, as well as fully generic trends already evidenced in the literature. This gives a fine demonstration for the need to discriminate co-active pump and signal contributions. Our self-consistent, still simplified model then consists of a valuable tool to help for a deeper understanding of the ageing issues. Furthermore, considering higher-order ytterbium aggregates, this should open new routes towards more comprehensive models.

Environmental, economic and social analysis of materials for doors and windows in Sri Lanka

Energy Technology Data Exchange (ETDEWEB)

Abeysundra, U.G. Yasantha; Babel, Sandhya; Sharp, Alice [Environmental Technology Program, Sirindhorn International Institute of Technology (SIIT), Thammasat University, P.O. Box 22, Pathumthani 12121 (Thailand); Gheewala, Shabbir [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology, School of Energy and Materials Building, Bangkok 10140 (Thailand)

2007-05-15

This paper compares the environmental, economic and social impacts of two types of doors and windows (elements), namely timber and aluminum taking into consideration the life cycle perspective. These elements are widely used for the buildings in Sri Lanka. Thus, it will help in the decision-making process when selecting materials for these elements. Major materials used for these elements are timber, brass, glass, paint, aluminum, rubber, steel and PVC boards. Environmental burdens associated with these materials are analyzed in terms of embodied energy, and environmental impacts that are relevant to Sri Lanka, such as global warming (GWP), acidification (ACP) and nutrient enrichment (NEP). Economic analysis is done using market prices of materials and affordability for those materials. Social concerns such as thermal comfort, good interior (aesthetics), ability to construct fast, and durability are analyzed based on the data collected through the questionnaires and also, interviews with the stakeholders of the buildings such as engineers, architects, building contractors and building users. It was found that timber elements are superior to aluminum elements in environmental scores (GWP, ACP and NEP). On economic score, also, timber elements are better. But on social score, aluminum elements are better than timber. It was also found that the higher the recycling percentage of aluminum, the higher the environmental favorability of the aluminum. (author)

Telling About Southern Fluctuations: Elizabeth Spencer at the Back Door

Directory of Open Access Journals (Sweden)

Gérald PRÉHER

2011-06-01

Full Text Available Le troisième roman d’Elizabeth Spencer, The Voice at the Back Door (1956, appartient à son cycle du Mississippi. Il traite des relations raciales et de la violence sudiste, deux thèmes qui n’avaient pas bonne presse à cette époque puisque le mouvement pour les droits civiques débutait. Le roman rappelle L’intrus (1948 de Faulkner en ce qu’il met en scène la recherche du coupable du meurtre d’un homme blanc. Cet article analyse la façon dont Spencer dépeint les manières du Sud en s’interrogeant sur les relations raciales. Le roman est également lu dans le contexte de sa publication puisque Spencer fut perçue comme une traîtresse par les Sudistes. Spencer utilise des sujets impopulaires pour révéler le paradoxe au cœur de la manière de vivre sudiste et montre combien le passé se rejoue constamment dans le présent.Elizabeth Spencer’s third novel, The Voice at the Back Door (1956, is part of her Mississippi cycle. It deals with race relations and southern violence, two highly controversial issues at the time since the Civil Rights Movements were beginning. The novel, reminiscent of William Faulkner’s Intruder in the Dust (1948, stages the search for a culprit after the murder of a white man. This paper focuses on Spencer’s portrait of southern manners and interracial relationships and analyzes the novel in the context of its publication. It will show that Spencer uses unpopular topics to expose the paradox at the core of the southern way of life and show that the past is constantly reenacted in the present.

Neuroprotective effect of bilberry extract in a murine model of photo-stressed retina.

Directory of Open Access Journals (Sweden)

Hideto Osada

Full Text Available Excessive exposure to light promotes degenerative and blinding retinal diseases such as age-related macular degeneration and retinitis pigmentosa. However, the underlying mechanisms of photo-induced retinal degeneration are not fully understood, and a generalizable preventive intervention has not been proposed. Bilberry extract is an antioxidant-rich supplement that ameliorates ocular symptoms. However, its effects on photo-stressed retinas have not been clarified. In this study, we examined the neuroprotective effects of bilberry extract against photo-stress in murine retinas. Light-induced visual function impairment recorded by scotopic and phototopic electroretinograms showing respective rod and cone photoreceptor function was attenuated by oral administration of bilberry extract through a stomach tube in Balb/c mice (750 mg/kg body weight. Bilberry extract also suppressed photo-induced apoptosis in the photoreceptor cell layer and shortening of the outer segments of rod and cone photoreceptors. Levels of photo-induced reactive oxygen species (ROS, oxidative and endoplasmic reticulum (ER stress markers, as measured by real-time reverse transcriptase polymerase chain reaction, were reduced by bilberry extract treatment. Reduction of ROS by N-acetyl-L-cysteine, a well-known antioxidant also suppressed ER stress. Immunohistochemical analysis of activating transcription factor 4 expression showed the presence of ER stress in the retina, and at least in part, in Müller glial cells. The photo-induced disruption of tight junctions in the retinal pigment epithelium was also attenuated by bilberry extract, repressing an oxidative stress marker, although ER stress markers were not repressed. Our results suggest that bilberry extract attenuates photo-induced apoptosis and visual dysfunction most likely, and at least in part, through ROS reduction, and subsequent ER stress attenuation in the retina. This study can help understand the mechanisms of photo

Controlling photo-oxidation processes of a polyfluorene derivative: The effect of additives and mechanism

Energy Technology Data Exchange (ETDEWEB)

Ferreira, G.R. [Laboratory of Polymers and Electronic Properties of Materials – UFOP, Ouro Preto, MG (Brazil); Nowacki, B. [Paulo Scarpa Polymer Laboratory – UFPR, Curitiba, PR (Brazil); Magalhães, A. [Instituto de Química, Universidade Estadual de Campinas – UNICAMP, Campinas, SP (Brazil); Azevedo, E.R. de [Instituto de Física de São Carlos, Universidade de São Paulo – USP, São Carlos, SP (Brazil); Sá, E.L. de [Chemistry Department, Federal University of Parana, Curitiba, PR (Brazil); Akcelrud, L.C. [Paulo Scarpa Polymer Laboratory – UFPR, Curitiba, PR (Brazil); Bianchi, R.F., E-mail: bianchi@iceb.ufop.br [Laboratory of Polymers and Electronic Properties of Materials – UFOP, Ouro Preto, MG (Brazil)

2014-08-01

The control of the photo degradation of a fluorene–vinylene–phenylene based-polymer, poly(9,9-di-hexylfluorenediylvinylene-alt-1,4-phenylenevinylene) (LaPPS16) was achieved by addition of a radical scavenger (RS) (enhancing photo resistance) or a radical initiator (RI) (reducing photo resistance). Photoluminescence, UV–Vis absorption, {sup 1}H NMR spectroscopies and gel permeation chromatography (GPC) revealed that the incorporating small amounts of RS or RI is an efficient way to control the rates of the photo-oxidation reactions, and thus to obtain the conjugated polymer with foreseeable degradation rates for applications in blue-light sensitive detectors for neonatal phototherapy. - Highlights: • Photo degradation control of a fluorene–vinylene–phenylene based polymer was achieved. • A radical scavenger enhanced photo resistance and radical initiator decreased it. • Color change rate with irradiation dose provided a basis for dosimeter construction.

Reversing the AAPT Photo Contest: A Physics Teacher Education Activity

Science.gov (United States)

Hechter, Richard P.

2016-01-01

This year while awaiting the arrival of the AAPT High School Physics Photo Contest poster, I developed an idea for my physics teacher education course that used the photo contest in a new context. While using an external source like a photograph to learn physics is not new to physics education, this article describes how we used the foundational…

Further research on the photo-SPME of triclosan

Energy Technology Data Exchange (ETDEWEB)

Sanchez-Prado, Lucia; Llompart, Maria; Lores, Marta; Fernandez-Alvarez, Maria; Garcia-Jares, Carmen; Cela, Rafael [Universidad de Santiago de Compostela, Departamento de Quimica Analitica, Nutricion y Bromatologia. Facultad de Quimica, Instituto de Investigacion y Analisis Alimentario, Santiago de Compostela (Spain)

2006-04-15

In this study the photoinduced degradation of triclosan has been investigated by photo-solid-phase microextraction (photo-SPME). In photo-SPME, photodegradation is carried out on the SPME fibre containing the target compound. Triclosan was extracted from aqueous solutions by use of polydimethylsiloxane SPME fibres and these were subsequently exposed to UV irradiation (power 8 W, wavelength 254 nm) for different times (from 2 to 60 min). The photodegradation kinetics of triclosan were investigated, the photoproducts generated were tentatively identified, and the photochemical behaviour of these products was studied by use of this on-fibre approach followed by gas chromatographic-mass spectrometric analysis. Eight photoproducts were tentatively identified, including chlorinated phenols, chlorohydroxydiphenyl ethers, 2,8-dichlorodibenzo-p-dioxin, and a possible dichlorodibenzodioxin isomer or dichlorohydroxydibenzofuran. The main photodegradation mechanisms were postulated and photodegradation pathways proposed. The effect of pH on triclosan degradation and on triclosan-to-dioxin conversion was also investigated. Triclosan degradation occurred, and generation of 2,8-dichlorodibenzo-p-dioxin was confirmed, throughout the pH range studied (from 3 to 9). (orig.)

Tunable photonic multilayer sensors from photo-crosslinkable polymers

Science.gov (United States)

Chiappelli, Maria; Hayward, Ryan

2014-03-01

The fabrication of tunable photonic multilayer sensors from stimuli-responsive, photo-crosslinkable polymers will be described. Benzophenone is covalently incorporated as a pendent photo-crosslinker, allowing for facile preparation of multilayer films by sequential spin-coating and crosslinking processes. Copolymer chemistries and layer thicknesses are selected to provide robust multilayer sensors which can show color changes across nearly the full visible spectrum due to the specific stimulus-responsive nature of the hydrated film stack. We will describe how this approach is extended to alternative sensor designs by tailoring the thickness and chemistry of each layer independently, allowing for the preparation of sensors which depend not only on the shift in wavelength of a reflectance peak, but also on the transition between Bragg mirrors and filters. Device design is optimized by photo-patterning sensor arrays on a single substrate, providing more efficient fabrication time as well as multi-functional sensors. Finally, radiation-sensitive multilayers, designed by choosing polymers which will preferentially degrade or crosslink under ionizing radiation, will also be described.

Catalytic Study on TiO2 Photo catalyst Synthesised Via Microemulsion Method on Atrazine

International Nuclear Information System (INIS)

Ruslimie, C.A.; Hasmizam Razali; Khairul, W.M.

2011-01-01

Titanium dioxide photo catalyst was synthesised by microemulsions method under controlled hydrolysis of titanium butoxide, Ti(O(CH 2 ) 3 )CH 3 . The synthesised TiO 2 photo catalyst was compared with Sigma-commercial TiO 2 by carrying out the investigation on its properties using scanning electron microscopy (SEM), x-ray diffraction (XRD) analysis and thermal gravimetric analysis (TGA). The photo catalytic activities for both photo catalysts were studied for atrazine photodegradation. (author)

Simulation of the noise transmission through automotive door seals

CERN Document Server

Hazir, Andreas

2016-01-01

Andreas Hazir is investigating the door seal contribution to the interior noise level of production vehicles. These investigations contain experimental contribution analyses of real production vehicles and of academic test cases as well as the development of a simulation methodology for noise transmission through sealing systems and side windows. The simulations are realized by coupling transient computational aeroacoustics of the exterior flow to nonlinear finite element simulations of the structural transmission. By introducing a linear transmission model, the setup and computational costs of the seal noise transmission are significantly reduced, resulting in the feasibility of numerical contribution analyses of real production vehicles. Contents Contribution Analyses of Production Vehicles Acoustic Excitation versus Aeroacoustic Excitation Development of a Simulation Methodology Sensitivity Analysis of Noise Transmission Simulations Target Groups Researchers and students in the field of automotive engineer...

ArF photo resist pattern sample preparation method using FIB without protective coating

Science.gov (United States)

Okushima, Hirohisa; Onozuka, Toshihiko; Kuroda, Yasushi; Yaguchi, Toshie; Umemura, Kaoru; Tamochi, Ryuichiro; Watanabe, Kenji; Hasegawa, Norio; Kawata, Isao; Rijpers, Bart

2006-03-01

This paper presents a novel method of FIB (FIB: focused ion beam) sample preparation to accurately evaluate critical dimensions and profiles of ArF photo resist patterns without the use of a protective coating on the photo resist. In order to accomplish this, the FIB micro-sampling method that is one of effective FIB milling and fabrication method was employed. First a Si cap is picked up from a silicon wafer and fixed to ArF photo resist patterns to protect against ion beam irradiation. Then, a micro-sample, a piece of Si-capped ArF photo resist, was extracted from the bulk ArF photo resist. In this procedure, this silicon cap always protects ArF photo resist patterns against ion beam irradiation. For the next step, the micro-sample is fixed to a needle stub of the FIB-STEM (STEM: scanning transmission electron microscopy) compatible rotation holder. This sample on the needle stub was rotated 180 degrees and milled from the side of Si substrate. Lastly, the sample is milled to the thickness of 2μm. In this process, the ion beam is irradiating from the silicon substrate side to minimize the ion beam irradiation damages on the ArF photo resist patterns. EDX (EDX: Energy dispersive X-ray spectroscopy) analysis proved that no gallium ions were detected on the surface of the ArF photo resist patterns. The feasibility of high accelerating voltage observation of STEM to observe line edge roughness of a thick sample like 2μm without shrinkage has been demonstrated.

3D Photo-Fabrication for Tissue Engineering and Drug Delivery

Directory of Open Access Journals (Sweden)

Rúben F. Pereira

2015-03-01

Full Text Available The most promising strategies in tissue engineering involve the integration of a triad of biomaterials, living cells, and biologically active molecules to engineer synthetic environments that closely mimic the healing milieu present in human tissues, and that stimulate tissue repair and regeneration. To be clinically effective, these environments must replicate, as closely as possible, the main characteristics of the native extracellular matrix (ECM on a cellular and subcellular scale. Photo-fabrication techniques have already been used to generate 3D environments with precise architectures and heterogeneous composition, through a multi-layer procedure involving the selective photocrosslinking reaction of a light-sensitive prepolymer. Cells and therapeutic molecules can be included in the initial hydrogel precursor solution, and processed into 3D constructs. Recently, photo-fabrication has also been explored to dynamically modulate hydrogel features in real time, providing enhanced control of cell fate and delivery of bioactive compounds. This paper focuses on the use of 3D photo-fabrication techniques to produce advanced constructs for tissue regeneration and drug delivery applications. State-of-the-art photo-fabrication techniques are described, with emphasis on the operating principles and biofabrication strategies to create spatially controlled patterns of cells and bioactive factors. Considering its fast processing, spatiotemporal control, high resolution, and accuracy, photo-fabrication is assuming a critical role in the design of sophisticated 3D constructs. This technology is capable of providing appropriate environments for tissue regeneration, and regulating the spatiotemporal delivery of therapeutics.

A photo-tunable membrane based on inter-particle crosslinking for decreasing diffusion rates

KAUST Repository

Li, Song

2015-01-01

Functional polymeric membranes are widely used to adjust and control the diffusion of molecules. Herein, photosensitive poly(hydroxycinnamic acid) (PHCA) microspheres, which were fabricated by an emulsification solvent-evaporation method, were embedded into an ethyl cellulose matrix to fabricate composite membranes with a photo-tunable property. The photoreaction of PHCA is based on the [2 + 2] cycloaddition of cinnamic moieties upon irradiation with 365 nm light. Intra-particle crosslinking in PHCA microspheres was confirmed in the solution phase, while inter-particle crosslinking between adjacent PHCA microspheres dominated the solid membrane phase. The inter-particle crosslinking turned down the permeability of the composite membranes by 74%. To prove the applicability of the designed system, the composite membrane was coated on a model drug reservoir tablet. Upon irradiating the tablet with UV light, the original permeability decreased by 57%, and consequently the diffusion rate of the cargo (Rhodamine B) from the tablet slowed down. Most importantly, the tablet showed sustained release for over 10 days. This controllability can be further tuned by adjusting the membrane thickness. Composite membranes showed excellent processing reproducibility together with consistent mechanical properties. These results demonstrate that the incorporation of photosensitive PHCA microspheres in polymeric membranes provides a promising photo-tunable material for different applications including coating and separation. This journal is © The Royal Society of Chemistry 2015.

Finite element simulation of surface defects in the automobile door outer panel

International Nuclear Information System (INIS)

Fukumura, Masaru; Yamasaki, Yuji; Inage, Daisuke; Fujita, Takashi

2004-01-01

Recently, a sheet metal forming simulation has become an indispensable tool for developing a new model of an automobile part within a limited short period. In these days, the utilization of a springback calculation of the formed part has been increasing. However, only a few papers on the prediction of surface defects have been reported in spite of serious needs.In this paper, surface defects in the door outer panel, especially those around the door handle embossment, have been investigated. Applying an explicit solver to the forming simulation, and an implicit solver to the springback calculation, we have tried to evaluate surface defects in the panel. In order to improve the accuracy of the simulation, numerical tools have been modeled including the precise shape of the draw beads so that the draw bead effects on both the material flow and the restraint on the springback deformation have been considered. Compared with the actual panel shape, which shows apparent surface defects, the simulated result has closely predicted the above defects around the embossment.To demonstrate the applicability of our simulation, a few sensitivity analyses have been carried out, modifying forming conditions such as blank holder force. Each result has shown slight but distinctive differences in the cross section profile of the panel. As a result, it has been realized that the influence of each considered factor on surface defects is qualitatively consistent with our practical knowledge

Photochemical Acceleration of DNA Strand Displacement by Using Ultrafast DNA Photo-crosslinking.

Science.gov (United States)

Nakamura, Shigetaka; Hashimoto, Hirokazu; Kobayashi, Satoshi; Fujimoto, Kenzo

2017-10-18

DNA strand displacement is an essential reaction in genetic recombination, biological processes, and DNA nanotechnology. In particular, various DNA nanodevices enable complicated calculations. However, it takes time before the output is obtained, so acceleration of DNA strand displacement is required for a rapid-response DNA nanodevice. Herein, DNA strand displacement by using DNA photo-crosslinking to accelerate this displacement is evaluated. The DNA photo-crosslinking of 3-cyanovinylcarbazole ( CNV K) was accelerated at least 20 times, showing a faster DNA strand displacement. The rate of photo-crosslinking is a key factor and the rate of DNA strand displacement is accelerated through ultrafast photo-crosslinking. The rate of DNA strand displacement was regulated by photoirradiation energy. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Characterization of the transverse phase space at the photo-injector test facility in DESY, Zeuthen site

International Nuclear Information System (INIS)

Staykov, Lazar

2012-10-01

High brightness electron beams with charge of 1 nC and low transverse emittance are necessary for the functioning of advanced light sources such as the Free-electron Laser in Hamburg (FLASH) and the European X-ray FEL (XFEL). The photo-injector test facility at DESY, Zeuthen site (PITZ) is dedicated to the optimization of such electron beams. At PITZ the electrons are produced using an RF gun cavity operated at accelerating gradients of up to 60 MV/m. The gun is equipped with a pair of solenoids for the compensation of the emittance growth due to linear space charge forces. This solenoid compensation scheme is enhanced with a properly matched TESLA type normal conducting booster cavity. The main tool for the characterization of the transverse phase space of the electron beam at PITZ is the emittance measurement system (EMSY). It employs the single slit method for the measurement of the transverse phase space distribution of the electron beam. In this thesis, the performance of the EMSY was optimized for measurement of low emittances in a wide range of photo-injector parameters including such that result in electron beams close to the XFEL specifications. First results on the characterization of the PITZ photo-injector with a gun operated at maximum accelerating gradient of 60 MV/m are presented. This includes scans of the solenoid focusing strength, the initial beam size and the booster gradient. A comparison between results obtained at lower accelerating gradients is made with emphasize on the benefit of higher accelerating gradient.

Characterization of the transverse phase space at the photo-injector test facility in DESY, Zeuthen site

Energy Technology Data Exchange (ETDEWEB)

Staykov, Lazar

2012-10-15

High brightness electron beams with charge of 1 nC and low transverse emittance are necessary for the functioning of advanced light sources such as the Free-electron Laser in Hamburg (FLASH) and the European X-ray FEL (XFEL). The photo-injector test facility at DESY, Zeuthen site (PITZ) is dedicated to the optimization of such electron beams. At PITZ the electrons are produced using an RF gun cavity operated at accelerating gradients of up to 60 MV/m. The gun is equipped with a pair of solenoids for the compensation of the emittance growth due to linear space charge forces. This solenoid compensation scheme is enhanced with a properly matched TESLA type normal conducting booster cavity. The main tool for the characterization of the transverse phase space of the electron beam at PITZ is the emittance measurement system (EMSY). It employs the single slit method for the measurement of the transverse phase space distribution of the electron beam. In this thesis, the performance of the EMSY was optimized for measurement of low emittances in a wide range of photo-injector parameters including such that result in electron beams close to the XFEL specifications. First results on the characterization of the PITZ photo-injector with a gun operated at maximum accelerating gradient of 60 MV/m are presented. This includes scans of the solenoid focusing strength, the initial beam size and the booster gradient. A comparison between results obtained at lower accelerating gradients is made with emphasize on the benefit of higher accelerating gradient.

Study of photo-oxidative reactivity of sunscreening agents based on photo-oxidation of uric acid by kinetic Monte Carlo simulation

International Nuclear Information System (INIS)

Moradmand Jalali, Hamed; Bashiri, Hadis; Rasa, Hossein

2015-01-01

In the present study, the mechanism of free radical production by light-reflective agents in sunscreens (TiO 2 , ZnO and ZrO 2 ) was obtained by applying kinetic Monte Carlo simulation. The values of the rate constants for each step of the suggested mechanism have been obtained by simulation. The effect of the initial concentration of mineral oxides and uric acid on the rate of uric acid photo-oxidation by irradiation of some sun care agents has been studied. The kinetic Monte Carlo simulation results agree qualitatively with the existing experimental data for the production of free radicals by sun care agents. - Highlights: • The mechanism and kinetics of uric acid photo-oxidation by irradiation of sun care agents has been obtained by simulation. • The mechanism has been used for free radical production of TiO 2 (rutile and anatase), ZnO and ZrO 2 . • The ratios of photo-activity of ZnO to anastase, rutile and ZrO have been obtained. • By doubling the initial concentrations of mineral oxide, the rate of reaction was doubled. • The optimum ratio of initial concentration of mineral oxides to uric acid has been obtained

Photo-onycholysis from minocycline. Side effects of minocycline therapy

International Nuclear Information System (INIS)

Kestel, J.L. Jr.

1981-01-01

Minocycline, prescribed for a patient with acne, produced a photosensitivity reaction (photo-onycholysis) involving the fingernails. The onset of this reaction coincided with an increase in sun exposure and cleared several months later, when the drug was discontinued. This type of reaction has been reported to occur in patients taking tetracycline or a member of the tetracycline group of antibiotics, of which minocycline is a member. This appears to be first report of photo-onycholysis due to minocycline

Elongational rheology and cohesive fracture of photo-oxidated LDPE

Energy Technology Data Exchange (ETDEWEB)

Rolón-Garrido, Víctor H., E-mail: victor.h.rolongarrido@tu-berlin.de; Wagner, Manfred H. [Chair of Polymer Engineering/Polymer Physics, Berlin Institute of Technology (TU Berlin), Fasanenstrasse 90, D-10623 Berlin (Germany)

2014-01-15

It was found recently that low-density polyethylene (LDPE) samples with different degrees of photo-oxidation represent an interesting system to study the transition from ductile to cohesive fracture and the aspects of the cohesive rupture in elongational flow. Sheets of LDPE were subjected to photo-oxidation in the presence of air using a xenon lamp to irradiate the samples for times between 1 day and 6 weeks. Characterisation methods included Fourier transform infrared spectroscopy, solvent extraction method, and rheology in shear and uniaxial extensional flows. Linear viscoelasticity was increasingly affected by increasing photo-oxidation due to crosslinking of LDPE, as corroborated by the carbonyl index, acid and aldehydes groups, and gel fraction. The molecular stress function model was used to quantify the experimental data, and the nonlinear model parameter β was found to be correlated with the gel content. The uniaxial data showed that the transition from ductile to cohesive fracture was shifted to lower elongational rates, the higher the gel content was. From 2 weeks photo-oxidation onwards, cohesive rupture occurred at every strain rate investigated. The true strain and true stress at cohesive fracture as well as the energy density applied to the sample up to fracture were analyzed. At low gel content, rupture was mainly determined by the melt fraction while at high gel content, rupture occurred predominantly in the gel structure. The strain at break was found to be independent of strain rate, contrary to the stress at break and the energy density. Thus, the true strain and not the stress at break or the energy density was found to be the relevant physical quantity to describe cohesive fracture behavior of photo-oxidated LDPE. The equilibrium modulus of the gel structures was correlated with the true strain at rupture. The stiffer the gel structure, the lower was the deformation tolerated before the sample breaks.

Titanium oxide modification with oxides of mixed cobalt valence for photo catalysis

Energy Technology Data Exchange (ETDEWEB)

Alanis O, R.; Jimenez B, J., E-mail: jaime.jimenez@inin.gob.m [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2010-07-01

In the present work, heterogenous photo catalysis, a technique often used for organic compound degradation toxic in water, was used. The photo catalyst most often used in this technique is TiO{sub 2}, which due to its physical and chemical properties, can degrade a great number of organic compounds. In addition, in recent years it has been verified that the doping of semiconductors with metals or metallic oxides increases the photo catalytic activity of these semiconductors, which is why it was proposed for doping by the impregnating method using commercial TiO{sub 2} synthesized by the Degussa company (TiO{sub 2} Degussa P25) with and oxide of mixed cobalt valence (Co{sub 3}O{sub 4}) synthesized using the sol-gel method. The synthesized photo catalyst TiO{sub 2}/Co{sub 3}O{sub 4} was characterized by the techniques of X-ray diffraction, scanning electronic microscopy, Raman spectroscopy and finally, photo catalytic tests by means of the degradation of methylene blue. (Author)

Route to Photo-Enabled Random Terahertz Metasurfaces

KAUST Repository

Peters, Luke; Gongora, J. S. Totero; Tunesi, Jacob D.; Fratalocchi, Andrea; Pasquazi, Alessia; Peccianti, Marco

2017-01-01

We experimentally investigate the enhancement and phase change of the THz emission from photo-excited randomly structured black silicon substrates mediated by an induced metallic state of the nanostructured surface.

Route to Photo-Enabled Random Terahertz Metasurfaces

KAUST Repository

Peters, Luke

2017-07-17

We experimentally investigate the enhancement and phase change of the THz emission from photo-excited randomly structured black silicon substrates mediated by an induced metallic state of the nanostructured surface.

Photo-responsive liquid crystalline epoxy networks with exchangeable disulfide bonds

Energy Technology Data Exchange (ETDEWEB)

Li, Yuzhan [Washington State Univ., Pullman, WA (United States); Zhang, Yuehong [Washington State Univ., Pullman, WA (United States); Rios, Orlando [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Keum, Jong K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kessler, Michael R. [Washington State Univ., Pullman, WA (United States); North Dakota State Univ., Fargo, ND (United States)

2017-07-27

The increasing demand for intelligent materials has driven the development of polymers with a variety of functionalities. However, combining multiple functionalities within one polymer is still challenging because of the difficulties encountered in coordinating different functional building blocks during fabrication. In this work, we demonstrate the fabrication of a multifunctional liquid crystalline epoxy network (LCEN) using the combination of thermotropic liquid crystals, photo-responsive azobenzene molecules, and exchangeable disulfide bonds. In addition to shape memory behavior enabled by the reversible liquid crystalline phase transition and photo-induced bending behavior resulting from the photo-responsive azobenzene molecules, the introduction of dynamic disulfide bonds into the LCEN resulted in a structurally dynamic network, allowing the reshaping, repairing, and recycling of the material.

Digital Preservation of Photo Journalism (Case Study of the Kompas Daily

Directory of Open Access Journals (Sweden)

Yuli Rahmawati

2017-01-01

Full Text Available Newspaper provides many information from politics, economics, cultures, and sports for society. Newspaper reports important events in the world. Besides the news, there also some pictures portraying those events. So readers will easilly to see what happen visually. According to the journalistic concept, photos has comply as a reference source. Kompas daily, firstly published on 1965, and published many historical photos both paper and digital format. The digitize process is done by kompas information center, through scanning, indexing, and syncronizing. Two most important issues are standardization of metadata and integrated retrieval systems. Standarization of metadata was design based on publishing standard,  IIM and was modified with IPTC news codes. Information retrieval systems was built by inserting information about publication. This system connecting photo creating data, storage systems, and retrieval systems. For kompas daily, the availability if digital object  such as photo can trigger the innitiatives of re-publishing historical momments in thematical rubrics. Digitize will give benefits for information disemination.

Photo-oxidative degradation of TiO{sub 2}/polypropylene films

Energy Technology Data Exchange (ETDEWEB)

García-Montelongo, X.L. [Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico); Martínez-de la Cruz, A., E-mail: azael70@yahoo.com.mx [Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico); Vázquez-Rodríguez, S. [Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico); Torres-Martínez, Leticia M. [Facultad de Ingeniería Civil, Universidad Autónoma de Nuevo León, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico)

2014-03-01

Graphical abstract: - Highlights: • Photo-oxidative degradation of polypropylene is accelerated by TiO{sub 2} incorporation. • Weight loss, FTIR, SEM and GPC shown high degree of degradation of polypropylene. • A mechanism of the photo-degradation of polypropylene by TiO{sub 2} is proposed. - Abstract: Photo-oxidative degradation of polypropylene films with TiO{sub 2} nanoparticles incorporated was studied in a chamber of weathering with Xenon lamps as irradiation source. TiO{sub 2} powder with crystalline structure of anatase was synthesized by thermal treatments at 400 and 500 °C starting from a precursor material obtained by sol–gel method. Composites of TiO{sub 2}/polypropylene were prepared with 0.1, 0.5 and 1.0 wt% of TiO{sub 2}. The mixture of components was performed using a twin screw extruder, the resulting material was pelletized by mechanical fragmenting and then hot-pressed in order to form polypropylene films with TiO{sub 2} dispersed homogeneously. Photo-oxidative degradation process was followed by visual inspection, weight loss of films, scanning electron microscopy (SEM), infrared spectroscopy with Fourier transformed (FTIR), and gel permeation chromatography (GPC)

DOORS to the semantic web and grid with a PORTAL for biomedical computing.

Science.gov (United States)

Taswell, Carl

2008-03-01

The semantic web remains in the early stages of development. It has not yet achieved the goals envisioned by its founders as a pervasive web of distributed knowledge and intelligence. Success will be attained when a dynamic synergism can be created between people and a sufficient number of infrastructure systems and tools for the semantic web in analogy with those for the original web. The domain name system (DNS), web browsers, and the benefits of publishing web pages motivated many people to register domain names and publish web sites on the original web. An analogous resource label system, semantic search applications, and the benefits of collaborative semantic networks will motivate people to register resource labels and publish resource descriptions on the semantic web. The Domain Ontology Oriented Resource System (DOORS) and Problem Oriented Registry of Tags and Labels (PORTAL) are proposed as infrastructure systems for resource metadata within a paradigm that can serve as a bridge between the original web and the semantic web. The Internet Registry Information Service (IRIS) registers [corrected] domain names while DNS publishes domain addresses with mapping of names to addresses for the original web. Analogously, PORTAL registers resource labels and tags while DOORS publishes resource locations and descriptions with mapping of labels to locations for the semantic web. BioPORT is proposed as a prototype PORTAL registry specific for the problem domain of biomedical computing.

Photo refractive effect in an Azo-dye doped polymer

International Nuclear Information System (INIS)

Khoshsima, H.

1997-01-01

Photo refractive, todays, is the frontier of nonlinear optics. The higher nonlinear properties, the more photo refractive effect will appear. In this experimental study, applying the experimental arrangement for Degenerate Four Wave Minx ing, we got benefit of P.V.K base polymer made complex with T.N.F, that is basically charge carrier. D.M.N.P.A.A chromophore molecules are used to produce second order nonlinear optics effect. Under the best experimental condition, the measured diffraction efficiency was about 70%

ATLAS TileCal Sub-Module Production at UIUC - Production Sub-Module Fabrication Photos

CERN Multimedia

Errede, Steve

2000-01-01

Step 6 - Quality Control Photo 12a - Using a Digital Vernier Caliper, we make sure the bolt holes are within the allotted distances. Photo 12 - We use a Cylindrical Square to make sure the sides are perpendicular. Photo 13 - We use 2 different kinds of slot checkers, one that checks the width of the slots, and one that checks the height of the slots.

'EN6-PHOTO' and 'JEF-2/PHOTO'. Photo-Atomic Interaction Data Library by the Lawrence Livermore National Laboratory, USA. Summary documentation

International Nuclear Information System (INIS)

Lemmel, H.D.

1994-01-01

The Photo-Atomic Interaction Data Library of the Livermore Evaluated Photon Data Library (EPDL) contains pair production cross-sections, photoelectric cross-sections, atomic form factors, coherent scattering cross-sections and some other data for all the elements from Z = 1 to 100. There are two versions of this library, the one being part of the U.S. ENDF/B-6 system, the other being part of the European JEF-2 system. Both are available on magnetic tape costfree from the IAEA Nuclear Data Section. (author)

Polarization dependent effects in photo-fragmentation dynamics of free molecules

International Nuclear Information System (INIS)

Mocellin, A.; Marinho, R.R.T.; Coutinho, L.H.; Burmeister, F.; Wiesner, K.; Naves de Brito, A.

2003-01-01

We present multicoincidence spectra of nitrogen, formic acid and methyl methacrylate. We demonstrate how to probe the local symmetry of molecular orbitals from molecules core excited with linearly polarized synchrotron radiation. The intensity distribution of the photoelectron photo-ion photo-ion coincidence (PEPIPICO) spectrum reflects the selectivity and localization of core excitation by polarized light. By simulating the spectra the angular dependence of the fragmentation is determined

Polarization dependent effects in photo-fragmentation dynamics of free molecules

Energy Technology Data Exchange (ETDEWEB)

Mocellin, A.; Marinho, R.R.T.; Coutinho, L.H.; Burmeister, F.; Wiesner, K.; Naves de Brito, A

2003-04-01

We present multicoincidence spectra of nitrogen, formic acid and methyl methacrylate. We demonstrate how to probe the local symmetry of molecular orbitals from molecules core excited with linearly polarized synchrotron radiation. The intensity distribution of the photoelectron photo-ion photo-ion coincidence (PEPIPICO) spectrum reflects the selectivity and localization of core excitation by polarized light. By simulating the spectra the angular dependence of the fragmentation is determined.

Microalgal distribution, diversity and photo-physiological ...

African Journals Online (AJOL)

Microalgal distribution, diversity and photo-physiological performance across five ... D'Esny (MAPD), the sandy beach of Blue Bay (SBBB) and the estuarine area of Le ... Microalgal density in the water column (micro-phytoplankton) was highest in ... Diatom was the most abundant microalgal group, followed by dinoflagellate ...

Solar photo catalytic treatment of simulated dyestuff effluents

Energy Technology Data Exchange (ETDEWEB)

Kositzi, M.; Antoniadis, A.; Poulios, I.; Kiridies, I.; Malato, S.

2003-07-01

The photo catalytic organic content reduction of two selected synthetic wastewater from the textile dyeing industry, by the use heterogeneous and homogeneous photo catalytic methods under solar irradiation, has been studied at a pilot plant scale at the Plataforma Solar de Almeria. the effect of two different TiO{sub 2} modifications with oxidants such as H{sub 2}O{sub 2} and Na{sub 2}S{sub 2}O{sub 8}, on the decolorisation and the organic content reduction (DOC) of the wastewater was examined. the TiO{sub 2}/H{sub 2}O{sub 2} system seems to be more efficient in comparison to the synergetic action which appears when using persulfate and TiO{sub 2} in these specific wastewaters. By an accumulation energy of 50 KJ L''-1 the synergetic effect of TiO{sub 2} P-25 with H{sub 2}O{sub 2} and Na{sub 2}S{sub 2}O{sub 8} leads to a 70% and 57% DOC reduction, respectively, in the case of cotton synthetic wastewater, while the decolorisation was almost complete. The photo catalytic decolorisation, as well as the DOC reduction in the case of naylon simulated wastewater is a slower process and by an accumulation energy of 50 KJ L''-1 leads to 54% mineralization in both cases. The Photo-Fenton process in both cases was more efficient for this type of wastewater in comparison to the TiO{sub 2}/oxidant system. An accumulation of energy of 50 KJ L''-1 leads to 90% reduction of the organic content. (Author) 13 refs.

Dual door entry to exciplex emission in a chimeric DNA duplex containing non-nucleoside-nucleoside pair.

Science.gov (United States)

Bag, Subhendu Sekhar; Talukdar, Sangita; Kundu, Rajen; Saito, Isao; Jana, Subhashis

2014-01-25

Dual door entry to exciplex formation was established in a chimeric DNA duplex wherein a fluorescent non-nucleosidic base surrogate () is paired against a fluorescent nucleosidic base surrogate (). Packing of the nucleobases via intercalative stacking interactions led to an exciplex emission either via FRET from the donor or direct excitation of the FRET acceptor .

Regeneration of irradiated optical fibres by photo-bleaching?

International Nuclear Information System (INIS)

Henschel, H.; Koehn, O.

1999-01-01

It is known that a light power between 0,1 and 20 μW caused bleaching of colour centres, which implies a reduction of induced loss. Older fibres especially those with a core made of undoped, low OH silica, experience tremendous photo-bleaching. Light of shorter wavelengths has a higher bleaching efficiency than that of longer wavelengths and same light intensity. The investigations have demonstrated that the injection of photo-bleaching light of shorter wavelength and higher intensity can distinctly decrease the radiation-induced loss of Ge-doped fibres, especially at low temperatures. Another possibility to apply photo-bleaching by short wavelength is to regenerate fibres that are permanently installed in radiation environments. Modern undoped multi-mode (MM) step index (Si), Ge-doped MM graded index (Gi) and Ge-doped single-mode (SM) fibres that had been irradiated were submitted to bleaching light. In this article it is shown how loss reduction and necessary bleaching time depend on wavelength and intensity of the bleaching light, on fibre length (bleaching time) and on radiation dose. These results are promising for the regeneration of optical fibres in facilities where the fibres cannot be replaced easily by new ones. (A.C.)

Performance of the PHIN High Charge Photo Injector

CERN Document Server

Petrarca, M; Doebert, S; Dabrowski, A; Divall, M; Fedoseev, V; Lebas, N; Lefevre, T; Losito, R; Egger, D; Mete, O

2010-01-01

The high charge PHIN photo injector is studied at CERN as an electron source for the CLIC Test Facility (CTF3) drive beam as an alternative to the present thermionic gun. The objective of PHIN is to demonstrate the feasibility of a laser-based electron source for CLIC. The photo injector operates with a 2.5 cell, 3 GHz RF gun using a Cs2Te photocathode illuminated by UV laser pulses generated by amplifying and frequency quadrupling the signal from a Nd:YLF oscillator running at 1.5GHz. The challenge is to generate a beam structure of 1908 micro bunches with 2.33nC per micro bunch at 1.5GHz leading to a high integrated train charge of 4446nC and nominal beam energy of 5.5MeV with current stability below 1%. In this paper we report and discuss the time resolved transverse and longitudinal beam parameters measurements. The performance of the photo cathodes made at CERN with a peak quantum efficiency of 18 % is shown as well. Laser pointing and amplitude stability results are discussed taking into account correla...

Bank of Standardized Stimuli (BOSS phase II: 930 new normative photos.

Directory of Open Access Journals (Sweden)

Mathieu B Brodeur

Full Text Available Researchers have only recently started to take advantage of the developments in technology and communication for sharing data and documents. However, the exchange of experimental material has not taken advantage of this progress yet. In order to facilitate access to experimental material, the Bank of Standardized Stimuli (BOSS project was created as a free standardized set of visual stimuli accessible to all researchers, through a normative database. The BOSS is currently the largest existing photo bank providing norms for more than 15 dimensions (e.g. familiarity, visual complexity, manipulability, etc., making the BOSS an extremely useful research tool and a mean to homogenize scientific data worldwide. The first phase of the BOSS was completed in 2010, and contained 538 normative photos. The second phase of the BOSS project presented in this article, builds on the previous phase by adding 930 new normative photo stimuli. New categories of concepts were introduced, including animals, building infrastructures, body parts, and vehicles and the number of photos in other categories was increased. All new photos of the BOSS were normalized relative to their name, familiarity, visual complexity, object agreement, viewpoint agreement, and manipulability. The availability of these norms is a precious asset that should be considered for characterizing the stimuli as a function of the requirements of research and for controlling for potential confounding effects.

Development of the photo catalytic materials for the purification and deodorization of hazardous wastes

International Nuclear Information System (INIS)

Hong, Gye Woon; Park, Ji Yeon; Jung, Choong Hwan; Kim, Weon Ju

1999-12-01

A hazardous material treatment system utilizing photochemical reaction is a new technology which does not produce any secondary pollutants after dissolving treatment because it is activated by solar photo energy. Photo catalysis reaction apparatus using photo catalytic reaction of TiO 2 was fabricated and installed to food waste treatment system for removing bad smell during treatment of food waste. Evolved gas was analysed by gas chromatograph and active carbon fiber sheet and yarn were used as adsorption media for photo catalysis in order to increase the effectiveness of filter system. (author)

Social networks and landscape of tourist destination: photos online in city image building

Directory of Open Access Journals (Sweden)

Luciana Noronha Pereira

2017-12-01

Full Text Available Tourist activity has the landscapes among its main attractions. Photographic records as fragments of reality are products of a look to aspects of the landscape and mediate the process of signification. New ways to record and share the tourist experience through produced digital photos and shared on-line has meant the expansion of this effect, and moreover has enabled new types of appropriation, interaction and so new forms of creation the space. This study aims to investigate possible influences of your online photos at image of tourist destinations, as from Balneário Camboriú (SC. The methodology includes a quantitative stage – quantity and location of the photos – and a qualitative – photos and comments submitted to the semiotic approach of content analysis. The concentration of on-line photos in seashore areas and the predominance of natural elements as central arguments, associated with positive emotions, stand out among the results.

Photo-oxidation of proteins and its role in cataractogenesis

DEFF Research Database (Denmark)

Davies, Michael Jonathan; Truscott, R J

2001-01-01

by the protein, or bound chromophore groups, thereby generating excited states (singlet or triplets) or radicals via photo-ionisation. The second major process involves indirect oxidation of the protein via the formation and subsequent reactions of singlet oxygen generated by the transfer of energy to ground...... state (triplet) molecular oxygen by either protein-bound, or other, chromophores. The basic principles behind these mechanisms of photo-oxidation of amino acids, peptides and proteins and the potential selectivity of damage are discussed. Emphasis is placed primarily on the intermediates...

Repetitive Bunches from RF-Photo Gun Radiate Coherently

CERN Document Server

Van der Geer, C A J; Van der Geer, S B

2004-01-01

We consider to feed the laser wake field accelerator of the alpha-X project by a train of low charge pancake electron bunches to reduce undesired expansion due to space-charge forces. To this purpose the photo excitation laser of the rf-injector is split into a train of sub-pulses, such that each of the produced electron bunches falls into a successive ponderomotive well of the plasma accelerator. This way the total accelerated charge is not reduced. The repetitive photo gun can be tested, at low energy, by connecting it directly to the undulator and monitoring the radiation. The assertions are based on the results of new GPT simulations.

HMSRP Hawaiian Monk Seal Photo Identification Database

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This photo collection contains identification and other images and video of Hawaiian monk seals taken by PSD personnel and cooperating scientists as part of the...