Oxidative nucleophilic substitution of hydrogen in nitro(pentafluorosulfanyl)benzenes with alkyl Grignard and lithium reagents

Czech Academy of Sciences Publication Activity Database

Vida, Norbert; Beier, Petr

2012-01-01

Roč. 143, SI (2012), s. 130-134 ISSN 0022-1139 R&D Projects: GA ČR GAP207/12/0072 Institutional support: RVO:61388963 Keywords : pentafluorosulfanyl group * nucleophilic aromatic substitutions * oxidations Subject RIV: CC - Organic Chemistry Impact factor: 1.939, year: 2012

Synthesis of a Fluorescent Acridone Using a Grignard Addition, Oxidation, and Nucleophilic Aromatic Substitution Reaction Sequence

Science.gov (United States)

Goodrich, Samuel; Patel, Miloni; Woydziak, Zachary R.

2015-01-01

A three-pot synthesis oriented for an undergraduate organic chemistry laboratory was developed to construct a fluorescent acridone molecule. This laboratory experiment utilizes Grignard addition to an aldehyde, alcohol oxidation, and iterative nucleophilic aromatic substitution steps to produce the final product. Each of the intermediates and the…

NCA nucleophilic radiofluorination on substituted benzaldehydes for the preparation of [18F]fluorinated aromatic amino acids

International Nuclear Information System (INIS)

Wadsak, Wolfgang; Wirl-Sagadin, Barbara; Mitterhauser, Markus; Mien, Leonhard-Key; Ettlinger, Dagmar E.; Keppler, Bernhard K.; Dudczak, Robert; Kletter, Kurt

2006-01-01

Nucleophilic aromatic substitution is a challenging task in radiochemistry. Therefore, a thorough evaluation and optimisation of this step is needed to provide a satisfactory tool for the routine preparation of [ 18 F]fluorinated aromatic amino acids. Two methods, already proposed elsewhere, were evaluated and improved. The yields for the radiofluorination were increased whereas activity loss during solid phase extraction was observed. Radiochemical yields for the two methods were 92.7±5.5% (method 1) and 92.1±12.3% (method 2) for conversion and 11.1±2.8% (method 1) and 34.8±0.6% (method 2) for purification, respectively. In total, we demonstrate an optimised method for the preparation of this important class of [ 18 F]fluorinated synthons for PET

Citrus Peel Additives for One-Pot Triazole Formation by Decarboxylation, Nucleophilic Substitution, and Azide-Alkyne Cycloaddition Reactions

Science.gov (United States)

Mendes, Desiree E.; Schoffstall, Allen M.

2011-01-01

This undergraduate organic laboratory experiment consists of three different reactions occurring in the same flask: a cycloaddition reaction, preceded by decarboxylation and nucleophilic substitution reactions. The decarboxylation and cycloaddition reactions occur using identical Cu(I) catalyst and conditions. Orange, lemon, and other citrus fruit…

Theoretical studies of the nucleophilic substitution of halides and amine at a sulfonyl center.

Science.gov (United States)

Sung, Dae Dong; Kim, Tae Joon; Lee, Ikchoon

2009-06-25

Gas-phase nucleophilic substitution reactions, F(-) + CH(3)SO(2)F, Cl(-) + CH(3)SO(2)Cl, Cl(-) + CH(3)SO(2)F, and NH(3) + CH(3)SO(2)Cl, have been investigated at the B3LYP/6-311+G** and MP2/6-31+G* levels of theory. A very shallow well for the reaction intermediate in a triple-well potential energy surface (PES) was observed for the identity fluoride exchange, but double well PESs were obtained for the other three reactions with three different PES profiles. NBO analyses of the transition states showed substantial charge transfer interactions in all cases which provided a much larger amount of stabilization energy compared with the corresponding species at the carbon center of methyl halides. This difference is primarily caused by the strong electropositive nature of the sulfur center. The F-S-F axial linkage in the distorted TBP type intermediate in the identity fluoride exchange reaction exhibited a weak three-center, four-electron omega-bonding, which is considered to provide stability of the intermediate. All the reactant (RC) and product complexes (PC) have Cs symmetry. The symmetry plane bisects angles HCH (of methyl group), OSO (of sulfonyl group), and HNH (of ammonia). Vicinal charge transfer interactions between the two out-of-plane C-H, S-O, and N-H bonds provide extra stabilization to the ion-dipole complexes together with H-bond formation of in-plane H atom with the nucleophile and/or leaving group.

Identification of ortho-Substituted Benzoic Acid/Ester Derivatives via the Gas-Phase Neighboring Group Participation Effect in (+)-ESI High Resolution Mass Spectrometry.

Science.gov (United States)

Blincoe, William D; Rodriguez-Granillo, Agustina; Saurí, Josep; Pierson, Nicholas A; Joyce, Leo A; Mangion, Ian; Sheng, Huaming

2018-04-01

Benzoic acid/ester/amide derivatives are common moieties in pharmaceutical compounds and present a challenge in positional isomer identification by traditional tandem mass spectrometric analysis. A method is presented for exploiting the gas-phase neighboring group participation (NGP) effect to differentiate ortho-substituted benzoic acid/ester derivatives with high resolution mass spectrometry (HRMS 1 ). Significant water/alcohol loss (>30% abundance in MS 1 spectra) was observed for ortho-substituted nucleophilic groups; these fragment peaks are not observable for the corresponding para and meta-substituted analogs. Experiments were also extended to the analysis of two intermediates in the synthesis of suvorexant (Belsomra) with additional analysis conducted with nuclear magnetic resonance (NMR), density functional theory (DFT), and ion mobility spectrometry-mass spectrometry (IMS-MS) studies. Significant water/alcohol loss was also observed for 1-substituted 1, 2, 3-triazoles but not for the isomeric 2-substituted 1, 2, 3-triazole analogs. IMS-MS, NMR, and DFT studies were conducted to show that the preferred orientation of the 2-substituted triazole rotamer was away from the electrophilic center of the reaction, whereas the 1-subtituted triazole was oriented in close proximity to the center. Abundance of NGP product was determined to be a product of three factors: (1) proton affinity of the nucleophilic group; (2) steric impact of the nucleophile; and (3) proximity of the nucleophile to carboxylic acid/ester functional groups. Graphical Abstract ᅟ.

Erosion of stereochemical control with increasing nucleophilicity: O-glycosylation at the diffusion limit.

Science.gov (United States)

Beaver, Matthew G; Woerpel, K A

2010-02-19

Nucleophilic substitution reactions of 2-deoxyglycosyl donors indicated that the reactivity of the oxygen nucleophile has a significant impact on stereoselectivity. Employing ethanol as the nucleophile resulted in a 1:1 (alpha:beta) ratio of diastereomers under S(N)1-like reaction conditions. Stereoselective formation of the 2-deoxy-alpha-O-glycoside was only observed when weaker nucleophiles, such as trifluoroethanol, were employed. The lack of stereoselectivity observed in reactions of common oxygen nucleophiles can be attributed to reaction rates of the stereochemistry-determining step that approach the diffusion limit. In this scenario, both faces of the prochiral oxocarbenium ion are subject to nucleophilic addition to afford a statistical mixture of diastereomeric products. Control experiments confirmed that all nucleophilic substitution reactions were performed under kinetic control.

Theoretical study on the nucleophilic fluoroalkylation of propylene oxide with fluorinated sulfones

Directory of Open Access Journals (Sweden)

Han Ling-Li

2013-01-01

Full Text Available The path of nucleophilic fluoroalkylation reaction of propylene oxide with PhSO2CYF- (Y=F,H, and PhSO2, respectively in gas phase and in Et2O solvent were studied theoretically. The nucleophilic fluoroalkylation of propylene oxide with fluorinated carbanions was probed by the reactivity comparison between (benzenesulfonylmonofluoromethyl anion (PhSO2CHF-, (benzenesulfonyl difluoromethyl anion (PhSO2CF2-, and bis(benzenesul-fonyl monofluoromethyl anion ((PhSO22CF-. The nucleophilicity reactivity order of PhSO2CYF- (Y = F, H, and PhSO2 is [(PhSO22CF-] > PhSO2CHF- > PhSO2CF2-, which indicates that introducing another electron-withdrawing benzenesulfonyl group is an effective way to significantly increase the nucleophilicity of the fluorinate carbanions. For comparison, we also studied the nucleophilic addition reactions of propylene oxide with chlorine substituted carbanion PhSO2CHCl-. The calculated results show that the nucleophilicity of PhSO2CYF- is better than that of PhSO2CHCl- for the ring opening reaction with propylene oxide. The calculated results are in good agreement with the available experiments.

The features of nucleophilic substitution of the nitro group in 4-alkyl-6-nitro-1,2,4-triazolo[5,1-c][1,2,4]triazines

Directory of Open Access Journals (Sweden)

E. N. Ulomsky

2017-05-01

Full Text Available The nucleophilic substitution of the nitro group of 4-alkyl-6-nitro-4,7-dihydro-1,2,4-triazolo[5,1-c][1,2,4]triazine-7-ones on the example of interactionwith morpholine was studied. It is established that under the action of excess cycloalkylimine at room temperature the unusual easy disclosure of triazine cycle with the formation of sterically hindered hydrazones occurs which are the key intermediates for further transformations. The carrying of reaction at elevated temperatures leads to the formation of products of substitution of the nitro group with the amine and also with morpholyl hydrazones which are the products of hydrolysis of amides of hydrazones and subsequent decarboxylation. Thus, the nucleophilic substitution of the nitro group in the described triazolotriazines flows through the ANRORC mechanism.

Reduced Reactivity of Amines against Nucleophilic Substitution via Reversible Reaction with Carbon Dioxide

Directory of Open Access Journals (Sweden)

Fiaz S. Mohammed

2015-12-01

Full Text Available The reversible reaction of carbon dioxide (CO2 with primary amines to form alkyl-ammonium carbamates is demonstrated in this work to reduce amine reactivity against nucleophilic substitution reactions with benzophenone and phenyl isocyanate. The reversible formation of carbamates has been recently exploited for a number of unique applications including the formation of reversible ionic liquids and surfactants. For these applications, reduced reactivity of the carbamate is imperative, particularly for applications in reactions and separations. In this work, carbamate formation resulted in a 67% reduction in yield for urea synthesis and 55% reduction for imine synthesis. Furthermore, the amine reactivity can be recovered upon reversal of the carbamate reaction, demonstrating reversibility. The strong nucleophilic properties of amines often require protection/de-protection schemes during bi-functional coupling reactions. This typically requires three separate reaction steps to achieve a single transformation, which is the motivation behind Green Chemistry Principle #8: Reduce Derivatives. Based upon the reduced reactivity, there is potential to employ the reversible carbamate reaction as an alternative method for amine protection in the presence of competing reactions. For the context of this work, CO2 is envisioned as a green protecting agent to suppress formation of n-phenyl benzophenoneimine and various n-phenyl–n-alky ureas.

Synthesis and reactivity of novel sulfur pentafluorides-Effect of the SF5 group on reactivity of nitrobenzenes in nucleophilic substitution

Czech Academy of Sciences Publication Activity Database

Beier, Petr

2017-01-01

Roč. 192, č. 2 (2017), s. 212-215 ISSN 1042-6507. [International Symposium on the Organic Chemistry of Sulfur (ISOCS) /27./. Jena, 26.07.2016-29.07.2016] Institutional support: RVO:61388963 Keywords : nucleophilic substitution * sulfur * fluorine * reaction rate Subject RIV: CC - Organic Chemistry OBOR OECD: Organic chemistry Impact factor: 0.809, year: 2016

Development of selective colorimetric probes for hydrogen sulfide based on nucleophilic aromatic substitution.

Science.gov (United States)

Montoya, Leticia A; Pearce, Taylor F; Hansen, Ryan J; Zakharov, Lev N; Pluth, Michael D

2013-07-05

Hydrogen sulfide is an important biological signaling molecule and an important environmental target for detection. A major challenge in developing H2S detection methods is separating the often similar reactivity of thiols and other nucleophiles from H2S. To address this need, the nucleophilic aromatic substitution (SNAr) reaction of H2S with electron-poor aromatic electrophiles was developed as a strategy to separate H2S and thiol reactivity. Treatment of aqueous solutions of nitrobenzofurazan (7-nitro-1,2,3-benzoxadiazole, NBD) thioethers with H2S resulted in thiol extrusion and formation of nitrobenzofurazan thiol (λmax = 534 nm). This reactivity allows for unwanted thioether products to be converted to the desired nitrobenzofurazan thiol upon reaction with H2S. The scope of the reaction was investigated using a Hammett linear free energy relationship study, and the determined ρ = +0.34 is consistent with the proposed SN2Ar reaction mechanism. The efficacy of the developed probes was demonstrated in buffer and in serum with associated submicromolar detection limits as low as 190 nM (buffer) and 380 nM (serum). Furthermore, the sigmoidal response of nitrobenzofurazan electrophiles with H2S can be fit to accurately quantify H2S. The developed detection strategy offers a manifold for H2S detection that we foresee being applied in various future applications.

Dechlorination of chloropicrin and 1,3-dichloropropene by hydrogen sulfide species: redox and nucleophilic substitution reactions.

Science.gov (United States)

Zheng, Wei; Yates, Scott R; Papiernik, Sharon K; Guo, Mingxin; Gan, Jianying

2006-03-22

The chlorinated fumigants chloropicrin (trichloronitromethane) and 1,3-dichloropropene (1,3-D) are extensively used in agricultural production for the control of soilborne pests. The reaction of these two fumigants with hydrogen sulfide species (H2S and HS-) was examined in well-defined anoxic aqueous solutions. Chloropicrin underwent an extremely rapid redox reaction in the hydrogen sulfide solution. Transformation products indicated reductive dechlorination of chloropicrin by hydrogen sulfide species to produce dichloro- and chloronitromethane. The transformation of chloropicrin in hydrogen sulfide solution significantly increased with increasing pH, indicating that H2S is less reactive toward chloropicrin than HS- is. For both 1,3-D isomers, kinetics and transformation products analysis revealed that the reaction between 1,3-D and hydrogen sulfide species is an S(N)2 nucleophilic substitution process, in which the chlorine at C3 of 1,3-D is substituted by the sulfur nucleophile to form corresponding mercaptans. The 50% disappearance time (DT50) of 1,3-D decreased with increasing hydrogen sulfide species concentration at a constant pH. Transformation of 1,3-D was more rapid at high pH, suggesting that the reactivity of hydrogen sulfide species in the experimental system stems primarily from HS-. Because of the relatively low smell threshold values and potential environmental persistence of organic sulfur products yielded by the reaction of 1,3-D and HS-, the effects of reduced sulfide species should be considered in the development of alternative fumigation practices, especially in the integrated application of sulfur-containing fertilizers.

Nucleophilic Substitution Reactions of N-Methyl α-Bromoacetanilides with Benzylamines in Dimethyl Sulfoxide

International Nuclear Information System (INIS)

Adhikary, Keshab Kumar; Lee, Hai Whang

2011-01-01

Kinetic studies of the reactions of N-methyl-Y-α-bromoacetanilides with substituted X-benzylamines have been carried out in dimethyl sulfoxide at 25.0 .deg. C. The Hammett plots for substituent X variations in the nucleophiles (log k N vs σ X ) are slightly biphasic concave upwards/downwards, while the Bronsted plots (log k N vs pK a ) are biphasic concave downwards with breakpoints at X = H. The Hammett plots for substituent Y variations in the substrates (log k N vs σ Y ) are biphasic concave upwards/downwards with breakpoints at Y = H. The cross-interaction constant ρ XY values are all negative: ρ XY = -0.32 for X = Y = electron-donating: -0.22 for X = electron-withdrawing and Y = electron-donating: -1.80 for X = electron-donating and Y = electronwithdrawing: -1.43 for X = Y = electron-withdrawing substituents. Deuterated kinetic isotope effects are primary normal (k H /k D > 1) for Y = electron-donating, while secondary inverse (k H /k D < 1) for Y = electronwithdrawing substituent. The proposed mechanisms of the benzylaminolyses of N-methyl-Y-α-bromoacetanilides are a concerted mechanism with a five membered ring TS involving hydrogen bonding between hydrogen (deuterium) atom in N-H(D) and oxygen atom in C = O for Y = electron-donating, while a concerted mechanism with an enolate-like TS in which the nucleophile attacks the α-carbon for Y = electronwithdrawing substituents

Conjugate Addition of Nucleophiles to the Vinyl Function of 2-Chloro-4-vinylpyrimidine Derivatives

Directory of Open Access Journals (Sweden)

Lucjan Strekowski

2010-03-01

Full Text Available Conjugate addition reaction of various nucleophiles across the vinyl group of 2-chloro-4-vinylpyrimidine, 2-chloro-4-(1-phenylvinylpyrimidine and 2-chloro-4-vinylquinazoline provides the corresponding 2-chloro-4-(2-substituted ethylpyrimidines and 2-chloro-4-(2-substituted ethylquinazolines. Treatment of these products, without isolation, with N-methylpiperazine results in nucleophilic displacement of chloride and yields the corresponding 2,4-disubstituted pyrimidines and quinazolines.

Optimization studies concerning the direct nucleophilic fluorination of butyrophenone neuroleptics

Energy Technology Data Exchange (ETDEWEB)

Katsifis, A; Hamacher, K; Schnitter, J; Stoecklin, G [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Chemie 1 - Nuklearchemie

1993-07-01

Based on the direct nucleophilic aromatic substitution described previously for [[sup 18]F]N-methylspiperone the butyrophenone neuroleptics benperidol, droperidol, fluanisone and haloperidol were labelled with fluorine-18. The n.c.a. aromatic nucleophilic NO[sub 2] [yields] [sup 18]F substitution takes place in the presence of the moderately basic cryptate system consisting of Kryptofix 2.2.2., potassium oxalate and potassium carbonate. The one step labeling reaction was performed in different solvents and is equally successful in dimethylsulfoxide, dimethylformamide or dimethylacetamide yielding 25-35% (EOS) within a reaction time of 5-30 min in the range of 140-160[sup o]C at analytical activity levels. (author).

Arylazoindazole Photoswitches : Facile Synthesis and Functionalization via SNAr Substitution

NARCIS (Netherlands)

Travieso-Puente, Raquel; Budzak, Simon; Chen, Juan; Stacko, Peter; Jastrzebski, Johann T B H; Jacquemin, Denis; Otten, Edwin

2017-01-01

A straightforward synthetic route to arylazoindazoles via nucleophilic aromatic substitution is presented. Upon deprotonation of the NH group, a C6F5-substituted formazan undergoes facile cyclization as a result of intermolecular nucleophilic substitution (SNAr). This new class of azo photoswitches

Chemical dynamics simulations of X- + CH3Y → XCH3 + Y- gas-phase S(N)2 nucleophilic substitution reactions. Nonstatistical dynamics and nontraditional reaction mechanisms.

Science.gov (United States)

Manikandan, Paranjothy; Zhang, Jiaxu; Hase, William L

2012-03-29

Extensive classical chemical dynamics simulations of gas-phase X(-) + CH(3)Y → XCH(3) + Y(-) S(N)2 nucleophilic substitution reactions are reviewed and discussed and compared with experimental measurements and predictions of theoretical models. The primary emphasis is on reactions for which X and Y are halogen atoms. Both reactions with the traditional potential energy surface (PES), which include pre- and postreaction potential energy minima and a central barrier, and reactions with nontraditional PESs are considered. These S(N)2 reactions exhibit important nonstatistical atomic-level dynamics. The X(-) + CH(3)Y → X(-)---CH(3)Y association rate constant is less than the capture model as a result of inefficient energy transfer from X(-)+ CH(3)Y relative translation to CH(3)Y rotation and vibration. There is weak coupling between the low-frequency intermolecular modes of the X(-)---CH(3)Y complex and higher frequency CH(3)Y intramolecular modes, resulting in non-RRKM kinetics for X(-)---CH(3)Y unimolecular decomposition. Recrossings of the [X--CH(3)--Y](-) central barrier is important. As a result of the above dynamics, the relative translational energy and temperature dependencies of the S(N)2 rate constants are not accurately given by statistical theory. The nonstatistical dynamics results in nonstatistical partitioning of the available energy to XCH(3) +Y(-) reaction products. Besides the indirect, complex forming atomic-level mechanism for the S(N)2 reaction, direct mechanisms promoted by X(-) + CH(3)Y relative translational or CH(3)Y vibrational excitation are possible, e.g., the roundabout mechanism.

The synthesis of no-carrier-added DL-4-[18F]fluorodeprenyl via the nucleophilic aromatic substitution reaction

International Nuclear Information System (INIS)

Plenevaux, Alain; Guillaume, Marcel

1991-01-01

No-carrier-added DL-α-methyl-β-4-[ 18 F]fluorophenyl-N-methyl-N-propynylethylamine (DL-4-[ 18 F]fluorodeprenyl) was synthesized via a 3-step procedure. The overall yield was 11%, the synthesis time was 90 min and the specific activity >0.57 Ci/μmol (end of synthesis). This synthesis approach, the conversion of an aromatic aldehyde to a homologous methyl ketone, extends the flexibility of the nucleophilic aromatic substitution reaction by applying it to the synthesis of radiotracers which do not bear electron-withdrawing activating groups on the aromatic ring. The tissue distribution of DL-4-[ 18 F]fluorodeprenyl in mice at 1, 10 and 50 min was also measured and showed that metabolic defluorination was not significant. Clearance or radioactivity from brain after injection of DL-4-[ 18 F]fluorodeprenyl was more rapid than that previously observed for [ 11 C]L-deprenyl. (author)

One-pot regioselective synthesis of nitrophenyloxazolinyl styrene oxides by the Darzens reaction of vicarious nucleophilic substitution-formed carbanions of 2-dichloromethyl-4,4-dimethyloxazoline.

Science.gov (United States)

Florio, Saverio; Lorusso, Patrizia; Granito, Catia; Luisi, Renzo; Troisi, Luigino

2004-07-23

The vicarious nucleophilic substitution reaction of dichloromethyloxazoline 2 with nitrobenzene has been investigated. Treatment of 2 with t-BuOK followed by the addition of nitrobenzene leads to benzylic carbanions 4 or 9 depending upon the solvent used (DMSO, DMF, or THF). Subsequent treatment of 4 or 9 with aldehydes, in a Darzens-like reaction, furnishes very good yields of nitrophenyl oxazolinyloxiranes 8 and 11. 1,2-Dioxazolinyl-1,2-dinitrophenylethene 7 forms quantitatively when carbanion 4 is allowed to warm to room temperature in the absence of external electrophiles.

Homologation chemistry with nucleophilic α-substituted organometallic reagents: chemocontrol, new concepts and (solved) challenges.

Science.gov (United States)

Castoldi, Laura; Monticelli, Serena; Senatore, Raffaele; Ielo, Laura; Pace, Vittorio

2018-05-31

The transfer of a reactive nucleophilic CH2X unit into a preformed bond enables the introduction of a fragment featuring the exact and desired degree of functionalization through a single synthetic operation. The instability of metallated α-organometallic species often poses serious questions regarding the practicability of using this conceptually intuitive and simple approach for forming C-C or C-heteroatom bonds. A deep understanding of processes regulating the formation of these nucleophiles is a precious source of inspiration not only for successfully applying theoretically feasible transformations (i.e. determining how to employ a given reagent), but also for designing new reactions which ultimately lead to the introduction of molecular complexity via short experimental sequences.

Nucleophilic addition of nitriles to secondary terpene alcohols

International Nuclear Information System (INIS)

Kozlov, N.G.; Popova, L.A.; Nesterov, G.V.

1987-01-01

The addition of nitriles of varying nucleophilicity to isocamphanol and exo-1,5,5-trimethyl-bicyclo[2.2.1]heptan-2-ol (isofenchol) was investigated. The authors examined the effect of the reaction conditions on the yield and structure of the target products of the reaction: N-substituted amides. As a result of the study, it was shown that in the reaction with chloroacetonitrile, propionitrile, methoxypropionitrile, isovaleronitrile, and phenylacetonitrile under the conditions of the Ritter reaction, isocamphanol is transformed into the corresponding substituted exo-N-acyl-1,7,7-trimethylbicyclo[2.2.1]hept-2-ylamines, as in the reaction with aceto- and benzonitriles, due to 2,6-hydride displacement accompanied by Wagner-Meerwein rearrangement. The structures of these amides were demonstrated by PMR spectroscopy

Novel organophosphorus scaffolds of urease inhibitors obtained by substitution of Morita-Baylis-Hillman adducts with phosphorus nucleophiles.

Science.gov (United States)

Ntatsopoulos, Vassilis; Vassiliou, Stamatia; Macegoniuk, Katarzyna; Berlicki, Łukasz; Mucha, Artur

2017-06-16

The reactivity of Morita-Baylis-Hillman allyl acetates was employed to introduce phosphorus-containing functionalities to the side chain of the cinnamic acid conjugated system by nucleophilic displacement. The proximity of two acidic groups, the carboxylate and phosphonate/phosphinate groups, was necessary to form interactions in the active site of urease by recently described inhibitor frameworks. Several organophosphorus scaffolds were obtained and screened for inhibition of the bacterial urease, an enzyme that is essential for survival of urinary and gastrointestinal tract pathogens. α-Substituted phosphonomethyl- and 2-phosphonoethyl-cinnamate appeared to be the most potent and were further optimized. As a result, one of the most potent organophosphorus inhibitors of urease, α-phosphonomethyl-p-methylcinnamic acid, was identified, with K i  = 0.6 μM for Sporosarcina pasteurii urease. High complementarity to the enzyme active site was achieved with this structure, as any further modifications significantly decreased its affinity. Finally, this work describes the challenges faced in developing ligands for urease. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

New Method for Nucleophilic Substitution on Hexachlorocyclotriphosphazene by Allylamine Using an Algerian Proton Exchanged Montmorillonite Clay (Maghnite-H+ as a Green Solid Catalyst

Directory of Open Access Journals (Sweden)

Lahouaria Medjdoub

2016-08-01

Full Text Available Nucleophilic substitution on hexachlorocyclotriphosphazene (HCCTP with allylamine in order to give hexa(allylaminocyclotriphosphazene (HACTP  is performed for the first time under mild conditions by using diethylether as solvent to replace benzene which is very toxic. The reaction time is reduced to half and also performed at room temperature but especially in the presence of an eco-catalyst called Maghnite-H+. This catalyst has a significant role in the industrial scale. In fact, the use of Maghnite is preferred for its many advantages: a very low purchase price compared to other catalysts, the easy removal of the reaction mixture. Then, Maghnite-H+ is became an excellent catalyst for many chemical reactions. The structure of HACTP synthesized in the presence of Maghnite-H+ to 5% by weight is confirmed by 1H-NMR, 13C-NMR, 31P-NMR (Nuclear magnetic resonance and FTIR (Fourier Transform Infrared spectroscopy. MALDI-TOF (Matrix-Assisted Laser Desorption/Ionisation-time-of-flight mass spectrometry is used to establish the molecular weight of HACTP which is 471 g/mol. DSC (Differential Scanning Calorimetery and TGA (Thermogravimetric Analysis show that HACTP is a crystalline product with a melting point of 88 °C. It is reactive after melting but is degraded from 230 °C. Copyright © 2016 BCREC GROUP. All rights reserved Received: 28th September 2015; Revised: 5th December 2015; Accepted: 4th January 2016 How to Cite: Medjdoub, L., Mohammed, B. (2016. New Method for Nucleophilic Substitution on Hexachlorocyclotriphosphazene by Allylamine Using an Algerian Proton Exchanged Montmorillonite Clay (Maghnite-H+ as a Green Solid Catalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2: 151-160 (doi:10.9767/bcrec.11.2.541.151-160 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.2.541.151-160

The effect of varying the anion of an ionic liquid on the solvent effects on a nucleophilic aromatic substitution reaction.

Science.gov (United States)

Hawker, Rebecca R; Haines, Ronald S; Harper, Jason B

2018-05-09

A variety of ionic liquids, each containing the same cation but a different anion, were examined as solvents for a nucleophilic aromatic substitution reaction. Varying the proportion of ionic liquid was found to increase the rate constant as the mole fraction of ionic liquid increased demonstrating that the reaction outcome could be controlled through varying the ionic liquid. The solvent effects were correlated with the hydrogen bond accepting ability (β) of the ionic liquid anion allowing for qualitative prediction of the effect of changing this component of the solute. To determine the microscopic origins of the solvent effects, activation parameters were determined through temperature-dependent kinetic analyses and shown to be consistent with previous studies. With the knowledge of the microscopic interactions in solution, an ionic liquid was rationally chosen to maximise rate enhancement demonstrating that an ionic solvent can be selected to control reaction outcome for this reaction type.

Convergent synthesis of 6-substituted phenanthridines via anionic ring closure

DEFF Research Database (Denmark)

Lysén, M.; Kristensen, Jesper Langgaard; Vedsø, P.

2002-01-01

Chemical equation presented The addition of organometallic derivatives to the cyano group of 2-(2-fluorophenyl)benzonitrile followed by intramolecular nucleophilic substitution produces 6-substituted phenanthridines. Alkyllithiums, aryllithiums, and sterically nondemanding lithium amides reacted ...

Inversion of Configuration at the Phosphorus Nucleophile in the Diastereoselective and Enantioselective Synthesis of P-Stereogenic syn-Phosphiranes from Chiral Epoxides.

Science.gov (United States)

Muldoon, Jake A; Varga, Balázs R; Deegan, Meaghan M; Chapp, Timothy W; Eördögh, Ádám M; Hughes, Russell P; Glueck, David S; Moore, Curtis E; Rheingold, Arnold L

2018-04-23

Nucleophilic substitution results in inversion of configuration at the electrophilic carbon center (S N 2) or racemization (S N 1). The stereochemistry of the nucleophile is rarely considered, but phosphines, which have a high barrier to pyramidal inversion, attack electrophiles with retention of configuration at P. Surprisingly, cyclization of bifunctional secondary phosphine alkyl tosylates proceeded under mild conditions with inversion of configuration at the nucleophile to yield P-stereogenic syn-phosphiranes. DFT studies suggested that the novel stereochemistry results from acid-promoted tosylate dissociation to yield an intermediate phosphenium-bridged cation, which undergoes syn-selective cyclization. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A quantitative approach to nucleophilic organocatalysis

Directory of Open Access Journals (Sweden)

Herbert Mayr

2012-09-01

Full Text Available The key steps in most organocatalytic cyclizations are the reactions of electrophiles with nucleophiles. Their rates can be calculated by the linear free-energy relationship log k(20 °C = sN(E + N, where electrophiles are characterized by one parameter (E and nucleophiles are characterized by the solvent-dependent nucleophilicity (N and sensitivity (sN parameters.Electrophilicity parameters in the range –10 E N N parameters of enamines derived from phenylacetaldehyde and MacMillan’s imidazolidinones one can rationalize why only strong electrophiles, such as stabilized carbenium ions (–8 E E = –6.75, are suitable electrophiles for enamine activated reactions with imidazolidinones. Several mechanistic controversies concerning iminium and enamine activated reactions could thus be settled by studying the reactivities of independently synthesized intermediates.Kinetic investigations of the reactions of N-heterocyclic carbenes (NHCs with benzhydrylium ions showed that they have similar nucleophilicities to common organocatalysts (e.g., PPh3, DMAP, DABCO but are much stronger (100–200 kJ mol–1 Lewis bases. While structurally analogous imidazolylidenes and imidazolidinylidenes have comparable nucleophilicities and Lewis basicities, the corresponding deoxy Breslow intermediates differ dramatically in reactivity. The thousand-fold higher nucleophilicity of 2-benzylidene-imidazoline relative to 2-benzylidene-imidazolidine is explained by the gain of aromaticity during electrophilic additions to the imidazoline derivatives. O-Methylated Breslow intermediates are a hundred-fold less nucleophilic than deoxy Breslow intermediates.

Ring opening of epoxides with C-nucleophiles.

Science.gov (United States)

Faiz, Sadia; Zahoor, Ameer Fawad

2016-11-01

Ring opening of epoxides has been an area of interest for organic chemists, owing to their reactivity toward nucleophiles. Such reactions yield important products depending on the type of nucleophiles used. This review article covers the synthetic approaches (1991-2015) used for the ring opening of epoxides via carbon nucleophiles.

Chromo- and fluorophoric water-soluble polymers and silica particles by nucleophilic substitution reaction of poly(vinyl amine

Directory of Open Access Journals (Sweden)

Katja Hofmann

2010-07-01

Full Text Available Novel chromophoric and fluorescent carbonitrile-functionalized poly(vinyl amine (PVAm and PVAm/silica particles were synthesized by means of nucleophilic aromatic substitution of 8-oxo-8H-acenaphtho[1,2-b]pyrrol-9-carbonitrile (1 with PVAm in water. The water solubility of 1 has been mediated by 2,6-O-β-dimethylcyclodextrin or by pre-adsorption onto silica particles. Furthermore, 1 was converted with isopropylamine into the model compound 1-M. All new compounds were characterized by NMR, FTIR, UV–vis and fluorescence spectroscopy. The solvent-dependent UV–vis absorption and fluorescence emission band positions of the model compound and the carbonitrile-functionalized PVAm were studied and interpreted using the empirical Kamlet–Taft solvent parameters π* (dipolarity/polarizability, α (hydrogen-bond donating capacity and β (hydrogen-accepting ability in terms of the linear solvation energy relationship (LSER. The solvent-independent regression coefficients a, b and s were determined using multiple linear correlation analysis. It is shown, that the chains of the polymer have a significant influence on the solvatochromic behavior of 1-P. The structure of the carbonitrile 1-Si bound to polymer-modified silica particles was studied by means of X-ray photoelectron spectroscopy (XPS and Brunauer–Emmett–Teller (BET measurements. Fluorescent silica particles were obtained as shown by fluorescence spectroscopy with a diffuse reflectance technique.

Ring opening of a resin-bound chiral aziridine with phenol nucleophiles

DEFF Research Database (Denmark)

Ottesen, Lars Korsgaard; Jaroszewski, Jerzy W; Franzyk, Henrik

2010-01-01

An efficient and versatile solid-phase route for the preparation of aryl-alkyl ethers is described. Regioselective ring opening of a resin-bound chiral aziridine with phenolic nucleophiles constitutes the key feature of the present protocol that allows incorporation of fluorescent moieties...

Olefination reactions of phosphorus-stabilized carbon nucleophiles.

Science.gov (United States)

Gu, Yonghong; Tian, Shi-Kai

2012-01-01

A range of phosphorus-stabilized carbon nucleophiles have been employed for alkene synthesis with high chemo-, regio-, and stereoselectivity. The Wittig, Horner-Wadsworth-Emmons, Horner-Wittig, and Evans-Akiba reactions utilize phosphonium-, phosphonate-, phosphine oxide-, and pentacoordinated phosphorane-stabilized carbanions as nucleophiles, respectively, to undergo olefination with aldehydes or ketones, and each of these transformations has its own advantages and limitations. Modifying the structures of these nucleophiles along with optimizing reaction conditions results in the formation of a wide variety of polysubstituted alkenes in a highly stereoselective manner. The olefination of imines with phosphonium ylides has recently emerged as a useful approach to tune the stereoselectivity for alkene synthesis. This review focuses on recent advances in the stereoselective olefination of phosphorus-stabilized carbon nucleophiles.

Kinetics on the reaction of substituted quinolines and p-substituted benzoylchlorides under various pressures

International Nuclear Information System (INIS)

Kim, Young Cheul; Lim, Jong Wan; Choi, Sung Yong; Kim, Se Kyong

1999-01-01

The reaction rates of substituted quinolines(6-CH 3 C 9 H 7 N, C 9 H 7 N) with p-substituted benzoylchlorides(p-CH 3 , p-H, p-NO 2 ) have been measured by conductometry in acetonitrile, and the rate constants are determined at various temperatures (10,15, 20, 25 .deg. C) and pressures(1, 200, 500, 1000bar). From the values of rate constants, the activation parameters(Ea, ΔV ≠ , ΔS ≠ , and ΔG ≠ ) and the pressure dependence of Hammett ρ values were determined. The rate constants increase as a function of temperatures and pressures, and are further increase by introduction the electron donor substituents in nucleophile(p-CH 3 ) or electron acceptor(p-NO 2 ) substituents in substrate. The activation volume, and the activation entropy are all negative. Hammett ρ values are also negative for nucleophile (ρ X ) and positive for the substrate (ρ Y ) over the pressure range studied. The results of kinetic studies for pressure and substituent show that these reactions proceed in typical S N 2 reaction mechanism and 'associative S N 2' in which bond formation favored with increasing pressures

Synthesis of substituted gamma-lactams through petasis-type addition of boronic acids to N-acyliminium lons

DEFF Research Database (Denmark)

Wu, Peng; Clausen, Mads Hartvig; Nielsen, Thomas Eiland

2014-01-01

Substituted g -lactams are important heterocyclic motifs found in various biologically active compounds and marketed drugs, such as glimepiride, doxapram, and levetiracetam. Among available m ethods for the synthesis of substituted g -lactams, the addition of nucleophiles to N -acyliminium ions...

Orbital-selective Mott phase of Cu-substituted iron-based superconductors

International Nuclear Information System (INIS)

Liu, Yang; Zhao, Yang-Yang; Song, Yun

2016-01-01

We study the phase transition in Cu-substituted iron-based superconductors with a new developed real-space Green’s function method. We find that Cu substitution has strong effect on the orbital-selective Mott transition introduced by the Hund’s rule coupling. The redistribution of the orbital occupancy which is caused by the increase of the Hund’s rule coupling, gives rise to the Mott–Hubbard metal-insulator transition in the half-filled d xy orbital. We also find that more and more electronic states appear inside that Mott gap of the d xy orbital with the increase of Cu substitution, and the in-gap states around the Fermi level are strongly localized at some specific lattice sites. Further, a distinctive phase diagram, obtained for the Cu-substituted Fe-based superconductors, displays an orbital-selective insulating phase, as a result of the cooperative effect of the Hund’s rule coupling and the impurity-induced disorder. (paper)

Aliphatic Nucleophilic Radio-fluorination

International Nuclear Information System (INIS)

Roeda, D.; Dolle, F.

2010-01-01

In this review we are looking at some aspects of nucleophilic aliphatic radio-fluorination, notably the labelled fluoride source, design aspects, the leaving group and the solvent. It should be clear that there is more to this branch of radiolabelling than one would suspect from the frequently used standard tosylate replacement with kryptofix/[ 18 F]fluoride in acetonitrile or DMSO. Competitive elimination can be a serious problem that can affect both yield and purification. De-protection of sensitive groups after radiolabelling and its possible side reactions can complicate purification. The right choice of leaving group and protecting groups may be crucial. Newer developments such as the use of tertiary alcohols or ionic liquids as solvents, long-chain poly-fluorinated sulphonate leaving groups facilitating fluorous solid phase extraction, or immobilisation of the precursor on a solid phase support may help to solve these problems, for example the longstanding problems with [ 18 F]FLT, whereas older concepts such as certain cyclic reactive entities for ring opening or even an abandoned reagent as [ 18 F]DAST should not be forgotten. (authors)

Stereochemistry of substitution at trico-ordinate phosphorus

DEFF Research Database (Denmark)

Nielsen, John; Dahl, Otto

1984-01-01

A series of reactions of ring-substituted 1,3,2-dioxaphospholanes, 1,3,2-oxazaphospholanes, 1,2-oxaphospholes, and phosphetanes bearing the leaving groups Cl, OR, or NR2 on phosphorus, with the nucleophiles HCl, MeO-, MeOH, PhOH, Me2NH, Et2NH, and [CH 2]5NH have been studied. N.m.r. signals (1H...

Effect of 2-methyl-substituted nitroimidazoles on the hydrolysis of 4-nitrophenyl esters. Suffield report

Energy Technology Data Exchange (ETDEWEB)

Clewley, R.G.; Adie, C.P.; Brouwer, B.H.

1994-03-01

Prior to investigating nitroimidazole surfactants for use in a new catalytic chemical agent decontaminant, the catalysis afforded by simple nitroimidazoles in hydrolysis reactions has been examined. The effect of 2-methyl-5-nitroimidazole on the hydrolysis of 4-nitrophenyl diphenylphosphinate and of 2-methyl-5-nitrobenzimidazole on the hydrolyses of both 4-nitrophenyl diphenylphosphinate and 4-nitrophenyl acetate has been determined. In all three cases there is a simple linear dependency of the reaction rate on the concentration of the anionic form of the nitroimidazole. Previous results had suggested self-inhibition by the nucleophile occurred in the 2-methyl-5-nitroimidazole catalysed hydrolysis of 4-nitrophenyl diphenylphosphinate; this hypothesis is no longer tenable. Comparison of the reactivity of 2-methyl -substituted nitroimidazolides to that of the corresponding unsubstituted species suggests that 2-alkyl-substituted nitroionidazole surfactants would not be significantly worse catalysts of the hydrolysis of organophosphorus species than their 4-substituted analogues. Decontamination, Chemical reactivity, Displacement reactions, Nucleophilic reactions, Imidazoles, Nitroimidazoles, Phenoxides, Simulants, UV Spectrophotometry, Mechanism.

An unprecedented chemospecific and stereoselective tandem nucleophilic addition/cycloaddition reaction of nucleophilic carbenes with ketenimines.

Science.gov (United States)

Cheng, Ying; Ma, Yang-Guang; Wang, Xiao-Rong; Mo, Jun-Ming

2009-01-16

The first study of the reaction between nucleophilic carbenes and ketenimines is reported. The interaction of thiazole and benzothiazole carbenes with ketenimines proceeded in a chemospecific and stereoselective manner to produce thiazole- and benzothiazole-spiro-pyrrole derivatives generally in good yields. The reaction was proposed to proceed via a tandem nucleophilic addition of carbene to the C=N bond of ketenimine followed by a stepwise [3+2] cycloaddition of the 1,3-dipolar intermediate with the C=C bond of ketenimine. This reaction provides a powerful protocol for the construction of novel polyfunctional thiazole-spiro-pyrrole or benzothiazole-spiro-pyrrole compounds that are not readily accessible by other methods.

A Fluorogenic Aromatic Nucleophilic Substitution Reaction for Demonstrating Normal-Phase Chromatography and Isolation of Nitrobenzoxadiazole Chromophores

Science.gov (United States)

Key, Jessie A.; Li, Matthew D.; Cairo, Christopher W.

2011-01-01

Normal-phase chromatography is an essential technique for monitoring chemical reactions, identifying the presence of specific components, as well as the purification of organic compounds. An experiment to facilitate the instruction and understanding of the concepts behind normal-phase chromatography at the introductory and intermediate…

Highly Defined Multiblock Copolypeptoids: Pushing the Limits of Living Nucleophilic Ring-Opening Polymerization

KAUST Repository

Fetsch, Corinna

2012-06-05

Advanced macromolecular engineering requires excellent control over the polymerization reaction. Living polymerization methods are notoriously sensitive to impurities, which makes a practical realization of such control very challenging. Reversible-deactivation radical polymerization methods are typically more robust, but have other limitations. Here, we demonstrate by repeated (ge;10 times) chain extension the extraordinary robustness of the living nucleophilic ring-opening polymerization of N-substituted glycine N-carboxyanhydrides, which yields polypeptoids. We observe essentially quantitative end-group fidelity under experimental conditions that are comparatively easily managed. This is employed to synthesize a pentablock quinquiespolymer with high definition. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Highly Defined Multiblock Copolypeptoids: Pushing the Limits of Living Nucleophilic Ring-Opening Polymerization

KAUST Repository

Fetsch, Corinna; Luxenhofer, Robert

2012-01-01

Advanced macromolecular engineering requires excellent control over the polymerization reaction. Living polymerization methods are notoriously sensitive to impurities, which makes a practical realization of such control very challenging. Reversible-deactivation radical polymerization methods are typically more robust, but have other limitations. Here, we demonstrate by repeated (ge;10 times) chain extension the extraordinary robustness of the living nucleophilic ring-opening polymerization of N-substituted glycine N-carboxyanhydrides, which yields polypeptoids. We observe essentially quantitative end-group fidelity under experimental conditions that are comparatively easily managed. This is employed to synthesize a pentablock quinquiespolymer with high definition. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Addition of HO-nucleophiles to free and coordinated nitriles

International Nuclear Information System (INIS)

Bokach, Nadejda A; Kukushkin, Vadim Yu

2005-01-01

The review surveys data on the addition of HO-nucleophiles (water, oximes, hydroxylamines, hydroxamic acids, alcohols) to nitriles. Main methods for C≡N bond activation in nucleophilic addition reactions are discussed. Particular attention is given to activation of nitriles through coordination to metal centres.

Tandem Cu-catalyzed ketenimine formation and intramolecular nucleophile capture: Synthesis of 1,2-dihydro-2-iminoquinolines from 1-(o-acetamidophenyl)propargyl alcohols

Science.gov (United States)

Kant, Ruchir

2014-01-01

Summary The copper-catalyzed ketenimine formation reaction of 1-(o-acetamidophenyl)propargyl alcohols with various sulfonyl azides is found to undergo a concomitant intramolecular nucleophile attack to generate 1,2-dihydro-2-iminoquinolines after aromatization (via elimination of acetyl and hydroxy groups) and tautomerization. The reaction produces 4-substituted and 3,4-unsubstituted title compounds in moderate to good yields under mild reaction conditions. PMID:24991276

Molecular-weight-enlarged multiple-pincer ligands: synthesis and application in palladium-catalyzed allylic substitution reactions

NARCIS (Netherlands)

Ronde, N.J.; Totev, D.; Müller, Christian; Lutz, M.; Spek, A.L.; Vogt, D.

2009-01-01

Three different pincer ligand systems are synthesized via nucleophilic substitution reactions of polyaromatic benzyl bromides as support molecules and phenol derivatives as ligand precursors. Retention tests using a polymeric nanofiltration membrane show moderate to good retention in THF and CH2Cl2.

XVIII Mendeleev congress on general and applied chemistry. Summaries of reports in five volumes. Volume 5. IV Russian-French symposium Supramolecular systems in chemistry and biology. II Russian-Indian symposium on organic chemistry. International symposium on present-day radiochemistry Radiochemistry: progress and prospects. International symposium Green chemistry, stable evolution and social responsibility of chemists. Symposium Nucleophilic hydrogen substitution in aromatic systems and related reactions

International Nuclear Information System (INIS)

2007-01-01

The 5 volume of the XVIII Mendeleev congress on general and applied chemistry includes summaries of reports on the subjects of sypramolecular systems in chemistry and biology, organic chemistry, modern radiochemistry, green chemistry - development and social responsibility of chemists, nucleophilic hydrogen substitution in aromatic systems and related chemical reactions [ru

C-Terminally modified peptides via cleavage of the HMBA linker by O-, N- or S-nucleophiles

DEFF Research Database (Denmark)

Hansen, Jonas; Diness, Frederik; Meldal, Morten Peter

2016-01-01

A large variety of C-terminally modified peptides was obtained by nucleophilic cleavage of the ester bond in solid phase linked peptide esters of 4-hydroxymethyl benzamide (HMBA). The developed methods provided peptides, C-terminally functionalized as esters, amides and thioesters, with high purity...... directly from the resin in a single reaction step. A comprehensive screening of the reaction conditions and scope for nucleophilic cleavage of peptides from the HMBA linker was performed....

General Allylic C–H Alkylation with Tertiary Nucleophiles

Science.gov (United States)

2015-01-01

A general method for intermolecular allylic C–H alkylation of terminal olefins with tertiary nucleophiles has been accomplished employing palladium(II)/bis(sulfoxide) catalysis. Allylic C–H alkylation furnishes products in good yields (avg. 64%) with excellent regio- and stereoselectivity (>20:1 linear:branched, >20:1 E:Z). For the first time, the olefin scope encompasses unactivated aliphatic olefins as well as activated aromatic/heteroaromatic olefins and 1,4-dienes. The ease of appending allyl moieties onto complex scaffolds is leveraged to enable this mild and selective allylic C–H alkylation to rapidly diversify phenolic natural products. The tertiary nucleophile scope is broad and includes latent functionality for further elaboration (e.g., aliphatic alcohols, α,β-unsaturated esters). The opportunities to effect synthetic streamlining with such general C–H reactivity are illustrated in an allylic C–H alkylation/Diels–Alder reaction cascade: a reactive diene is generated via intermolecular allylic C–H alkylation and approximated to a dienophile contained within the tertiary nucleophile to furnish a common tricyclic core found in the class I galbulimima alkaloids. PMID:24641574

General allylic C-H alkylation with tertiary nucleophiles.

Science.gov (United States)

Howell, Jennifer M; Liu, Wei; Young, Andrew J; White, M Christina

2014-04-16

A general method for intermolecular allylic C-H alkylation of terminal olefins with tertiary nucleophiles has been accomplished employing palladium(II)/bis(sulfoxide) catalysis. Allylic C-H alkylation furnishes products in good yields (avg. 64%) with excellent regio- and stereoselectivity (>20:1 linear:branched, >20:1 E:Z). For the first time, the olefin scope encompasses unactivated aliphatic olefins as well as activated aromatic/heteroaromatic olefins and 1,4-dienes. The ease of appending allyl moieties onto complex scaffolds is leveraged to enable this mild and selective allylic C-H alkylation to rapidly diversify phenolic natural products. The tertiary nucleophile scope is broad and includes latent functionality for further elaboration (e.g., aliphatic alcohols, α,β-unsaturated esters). The opportunities to effect synthetic streamlining with such general C-H reactivity are illustrated in an allylic C-H alkylation/Diels-Alder reaction cascade: a reactive diene is generated via intermolecular allylic C-H alkylation and approximated to a dienophile contained within the tertiary nucleophile to furnish a common tricyclic core found in the class I galbulimima alkaloids.

Nucleophilic addition of amines to the activated ethylene bond in non-aqueous media

International Nuclear Information System (INIS)

Perepichka, Igor F.; Popov, Anatolii F.

1995-01-01

The kinetics of addition of a number of primary and secondary aliphatic amines to trans-(2-furyl) nitro ethylene (1) has been studied in solvents of various polarities (from acetonitrile, ε 37.5, to heptane, ε 1.89). It has been shown that the reaction is catalysed both by the amine reagent and by tertiary amines. On the basis of analyzing the observed kinetic regularities a stepwise reaction mechanism has been proposed which involves formation of zwitterionic intermediate (3) at the first equilibrium step (k 1 , K 1 ) which is then converted into the reaction product by means of proton transfer in parallel routes, the non-catalytic one (k 2 ) and that catalysed by the initial (K 3 ) or tertiary (K 4 ) amine. The observed high values of the deuterium isotope effects in the reaction (K H /K D ∼ 2.3 - 8.9) confirm that proton transfer occurs in the rate-limiting step of the reaction (primary kinetic isotope effect). The third order by amine kinetic route is observed in low polar media which is due to participation of amine dimers (R 2 NH HNR 2 ) in the reaction. The observed kinetic regularities are compared with those for the nucleophilic aromatic substitution reactions in low-polar media, and the conclusion has been made that the reaction route of the third order by amine proceeds as reversible nucleophilic attack by amine dimer and following base-catalysed transformation of the intermediate into the product. (author)

Optical modulation in nematic phase of halogen substituted hydrogen bonded liquid crystals

Science.gov (United States)

Vijayakumar, V. N.; Madhu Mohan, M. L. N.

2012-01-01

A series of halogen-substituted hydrogen-bonded liquid crystalline complexes have been designed and synthesised. A successful attempt has been made to form complementary hydrogen bonding between the dodecyloxy benzoic acid (12BAO) and halogen-substituted benzoic acids and the physical properties exhibited by the individual complexes are studied. The complexes obtained are analysed by polarising optical microscope (POM), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and dielectric studies. The formation of complementary hydrogen bond is confirmed through FTIR spectra. An interesting feature of this series is the observation of a field-induced transition (FiT) in nematic phase. Another interesting phenomenon is the observation of a new smectic X phase (worm-like texture) in all the synthesised complexes. Dielectric relaxation studies in the smectic C phase of these hydrogen bonded complexes along with the Arrhenius and the Cole-Cole plots are discussed. Optical tilt angle in smectic C phase and the corresponding fitted data analysis concur with the Mean field theory prediction.

Chemoselective reductive nucleophilic addition to tertiary amides, secondary amides, and N-methoxyamides.

Science.gov (United States)

Nakajima, Minami; Oda, Yukiko; Wada, Takamasa; Minamikawa, Ryo; Shirokane, Kenji; Sato, Takaaki; Chida, Noritaka

2014-12-22

As the complexity of targeted molecules increases in modern organic synthesis, chemoselectivity is recognized as an important factor in the development of new methodologies. Chemoselective nucleophilic addition to amide carbonyl centers is a challenge because classical methods require harsh reaction conditions to overcome the poor electrophilicity of the amide carbonyl group. We have successfully developed a reductive nucleophilic addition of mild nucleophiles to tertiary amides, secondary amides, and N-methoxyamides that uses the Schwartz reagent [Cp2 ZrHCl]. The reaction took place in a highly chemoselective fashion in the presence of a variety of sensitive functional groups, such as methyl esters, which conventionally require protection prior to nucleophilic addition. The reaction will be applicable to the concise synthesis of complex natural alkaloids from readily available amide groups. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Living Polymerization of N -Substituted β-Alanine N -Carboxyanhydrides: Kinetic Investigations and Preparation of an Amphiphilic Block Copoly-β-Peptoid

KAUST Repository

Grossmann, Arlett; Luxenhofer, Robert

2012-01-01

attention. Here we present results that suggest that while N-substituted β-alanine N-carboxyanhydrides can undergo a living nucleophilic ring-opening polymerization, the solubility of poly(β-peptoid)s can be very poor, which contributes to the limited

Kinetic study on S_NAr reactions of 1-(Y-Substituted-phenoxy)-2,4-dinitrobenzenes with azide ion: Effect of changing nucleophile from hydroxide to zzide ion on reaction mechanism and reactivity

International Nuclear Information System (INIS)

Seo, Hyeon Ok; Kim, Min Young; Han, So Yeop; Um, Ik Hwan

2015-01-01

Second-order rate constants (k_N_3_−) for SNAr reactions of 1-(Y-substituted-phenoxy)-2,4-dinitrobenzenes (2a–2h) with math formula in 80 mol % H_2O/20 mol % DMSO at 25.0 ± 0.1 °C have been measured spectrophotometrically. The Brønsted-type plot is linear with β"l"g = −0.38. The Hammett plots correlated with math formula and math formula constants exhibit highly scattered points. In contrast, the Yukawa–Tsuno plot results in an excellent linear correlation with ρ_Y = 1.02 and r = 0.51, indicating that a negative charge develops partially on the O atom of the leaving Y-substituted-phenoxy moiety in the transition state. Accordingly, the reactions have been concluded to proceed through a stepwise mechanism, in which expulsion of the leaving group occurs in the rate-determining step. Comparison of k_N_3_− with the k_O_H_− values reported previously for the corresponding reactions with OH"− has revealed that math formula is only 6- to 26-fold less reactive than OH"− toward substrates 2a–2h, although the former is over 11 pK_a units less basic than the latter. Solvation and polarizability effects have been suggested to be responsible for the unusual reactivity shown by math formula and OH"−. Effects of changing nucleophile from OH"− to N_3"− on reaction mechanism and reactivity are discussed in detail

Ring transformation of chromone-3-carboxamide under nucleophilic conditions

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Magdy A., E-mail: magdy_ahmed1977@yahoo.com [Department of Chemistry, Faculty of Education, Ain Shams University, Cairo(Egypt)

2013-11-15

The chemical reactivity of chromone-3-carboxamide was studied towards a series of nitrogen and carbon nucleophiles. Treatment of carboxamide with some primary amines gave chromane-2,4-diones. Condensation of carboxamide with hydrazine hydrate, phenyl hydrazine and hydroxylamine hydrochloride afforded chromenopyrazoles and chromenoisoxazole, respectively. Reaction of carboxamide with guanidine hydrochloride, cyanoguanidine and thiourea resulted in ring transformation producing chromenopyridines. The chemical behavior of carboxamide was also studied towards ethylenediamine, o-phenylenediamine, 2-aminophenol and 2-aminothiophenol. A variety of products were isolated from the reaction of carboxamide with some carbon nucleophiles. (author)

Nucleophilic difluoromethylation and difluoromethylenation of aldehydes

Czech Academy of Sciences Publication Activity Database

Beier, Petr; Alexandrova, Anastasia; Zibinsky, M.; Prakash, G. K. S.

2008-01-01

Roč. 64, č. 49 (2008), s. 10977-10985 ISSN 0040-4020 R&D Projects: GA ČR GP203/08/P310 Institutional research plan: CEZ:AV0Z40550506 Keywords : difluoromethylation * difluoromethylenation * phosphonate * nucleophilic addition Subject RIV: CC - Organic Chemistry Impact factor: 2.897, year: 2008

Phase evaluation of Li{sup +} substituted CoFe{sub 2}O{sub 4} nanoparticles, their characterizations and magnetic properties

Energy Technology Data Exchange (ETDEWEB)

Kadam, R.H. [Materials Science Research Lab, Shrikrishna Mahavidyalaya Gunjoti, Osmanabad, Maharashtra (India); Alone, Suresh T. [Department of Physics, RS Art' s, Science and Commerce College, Pathri, Aurangabad, Maharashtra (India); Mane, Maheshkumar L. [Department of Physics, Rajarshi Shahu Mahavidyalaya, Latur, Maharashtra (India); Biradar, A.R. [Materials Science Research Lab, Shrikrishna Mahavidyalaya Gunjoti, Osmanabad, Maharashtra (India); Shirsath, Sagar E., E-mail: shirsathsagar@hotmail.com [Spin Device Technology Center, Department of Information Engineering, Shinshu University, Nagano 380-8553 (Japan)

2014-04-15

Li{sup +} substituted CoFe{sub 2}O{sub 4} with the chemical formula Li{sub 3x}CoFe{sub 2−x}O{sub 4} were synthesized by sol–gel auto combustion method. The synthesized samples were annealed at 600 °C for 4 h. X-ray diffraction data were used to evaluate the structure of the prepared samples. Spinel ferrite phase of CoFe{sub 2}O{sub 4} changes to ordered like lithium ferrite phase with increase in L{sup i+} substitution. Lattice constant increases whereas particle size found to decrease with Li{sup +} substitution. Infrared spectroscopy also confirmed the phase transition of CoFe{sub 2}O{sub 4} after the incorporation of lithium ions. Substitution of Li{sup +} ions for Fe{sup 3+} caused a decrease in the saturation magnetization from 69.59 emu/g to 47.71 emu/g and the coercivity increased from 647 Oe to 802 Oe. Resistivity and dielectric properties shows inverse relation to each other. - Highlights: • Li{sup +} ion substituted CoFe{sub 2}O{sub 4}. • Single phase cubic spinel structure changes with Li{sup +} substitution. • Magnetization decreases whereas coercivity increases with increasing Li{sup +}. • Resistivity decreases with Li{sup +} substitution.

Multiple nucleophilic elbows leading to multiple active sites in a single module esterase from Sorangium cellulosum

DEFF Research Database (Denmark)

Udatha, D.B.R.K. Gupta; Madsen, Karina Marie; Panagiotou, Gianni

2015-01-01

The catalytic residues in carbohydrate esterase enzyme families constitute a highly conserved triad: serine, histidine and aspartic acid. This catalytic triad is generally located in a very sharp turn of the protein backbone structure, called the nucleophilic elbow and identified by the consensus...... sequence GXSXG. An esterase from Sorangium cellulosum Soce56 that contains five nucleophilic elbows was cloned and expressed in Escherichia coli and the function of each nucleophilic elbowed site was characterized. In order to elucidate the function of each nucleophilic elbow, site directed mutagenesis....... To our knowledge, this is the first report presenting the role of multiple nucleophilic elbows in the catalytic promiscuity of an esterase. Further structural analysis at protein unit level indicates the new evolutionary trajectories in emerging promiscuous esterases....

Alternative synthesis of 9-{3-[(diisopropoxyphosphoryl)-methoxy]-2-hydroxypropyl}adenine and its free phosphonates substituted at the C-8 position of purine base

Czech Academy of Sciences Publication Activity Database

Janeba, Zlatko; Masojídková, Milena; Holý, Antonín

2010-01-01

Roč. 75, č. 3 (2010), s. 371-381 ISSN 0010-0765 Institutional research plan: CEZ:AV0Z40550506 Keywords : acyclic nucleoside phosphonates * HPMPA * nucleophilic substitution * intramolecular cyclization Subject RIV: CC - Organic Chemistry Impact factor: 0.853, year: 2010

Hydroxylation of p-substituted phenols by tyrosinase: Further insight into the mechanism of tyrosinase activity

International Nuclear Information System (INIS)

Muñoz-Muñoz, Jose Luis; Berna, Jose; García-Molina, María del Mar; Garcia-Molina, Francisco; Garcia-Ruiz, Pedro Antonio; Varon, Ramon

2012-01-01

Highlights: ► The action the copper complexes and tyrosinase on phenols is equivalent. ► Isotope effect showed that nucleophilic attack to copper atom may be the slower step. ► The value of ρ (Hammett constant) supports an electrophilic aromatic substitution. ► Data obtained in steady state pH 7 conditions support the mechanism of Scheme 1SM. -- Abstract: A study of the monophenolase activity of tyrosinase by measuring the steady state rate with a group of p-substituted monophenols provides the following kinetic information: k cat m and the Michaelis constant, K M m . Analysis of these data taking into account chemical shifts of the carbon atom supporting the hydroxyl group (δ) and σ p + , enables a mechanism to be proposed for the transformation of monophenols into o-diphenols, in which the first step is a nucleophilic attack on the copper atom on the form E ox (attack of the oxygen of the hydroxyl group of C-1 on the copper atom) followed by an electrophilic attack (attack of the hydroperoxide group on the ortho position with respect to the hydroxyl group of the benzene ring, electrophilic aromatic substitution with a reaction constant ρ of −1.75). These steps show the same dependency on the electronic effect of the substituent groups in C-4. Furthermore, a study of a solvent deuterium isotope effect on the oxidation of monophenols by tyrosinase points to an appreciable isotopic effect. In a proton inventory study with a series of p-substituted phenols, the representation of k cat f n /k cat f 0 against n (atom fractions of deuterium), where k cat f n is the catalytic constant for a molar fraction of deuterium (n) and k cat f 0 is the corresponding kinetic parameter in a water solution, was linear for all substrates. These results indicate that only one of the proton transfer processes from the hydroxyl groups involved the catalytic cycle is responsible for the isotope effects. We suggest that this step is the proton transfer from the hydroxyl group

Accessing 2-substituted piperidine iminosugars by organometallic addition/intramolecular reductive amination: aldehyde vs. nitrone route.

Science.gov (United States)

Mirabella, S; Fibbi, G; Matassini, C; Faggi, C; Goti, A; Cardona, F

2017-11-07

A dual synthetic strategy to afford 2-substituted trihydroxypiperidines is disclosed. The procedure involved Grignard addition either to a carbohydrate-derived aldehyde or to a nitrone derived thereof, and took advantage of an efficient ring-closure reductive amination strategy in the final cyclization step. An opposite diastereofacial preference was demonstrated in the nucleophilic attack to the two electrophiles, which would finally produce the same piperidine diastereoisomer as the major product. However, use of a suitable Lewis acid in the Grignard addition to the nitrone allowed reversing the selectivity, giving access to 2-substituted piperidines with the opposite configuration at C-2.

α-deuterium isotope effects in benzyl halides. 2. Reaction of nucleophiles with substituted benzyl bromides. Evidence for a change in transition-state structure with electron-donating substituents

International Nuclear Information System (INIS)

Vitullo, V.P.; Grabowski, J.; Sridharan, S.

1980-01-01

Rates and α-D isotope effects have been determined for the following substrates and nucleophiles: p-methoxybenzyl bromide (Et 3 N, SCN - , N 3 - , OH - , S 2 O 3 2- ), benzyl bromide (Et 3 N, SCN - , N 3 - , OH - , S 2 O 3 2- ), and p-nitrobenzyl bromide (Et 3 N, SCN - , N 3 - , S 2 O 3 2- ). In nearly all cases the second-order rate constant for each nucleophile goes through a minimum for the unsubstituted compound while the α-D isotope increases monotonically in the squence p-NO 2 > p-H > p-OCH 3 . These results are consistent with an increasing looseness of the S/sub N/2 transition state as the substituent on the aromatic ring becomes more electron donating. 4 figures, 3 tables

Computational study of the rate constants and free energies of intramolecular radical addition to substituted anilines

Directory of Open Access Journals (Sweden)

Andreas Gansäuer

2013-08-01

Full Text Available The intramolecular radical addition to aniline derivatives was investigated by DFT calculations. The computational methods were benchmarked by comparing the calculated values of the rate constant for the 5-exo cyclization of the hexenyl radical with the experimental values. The dispersion-corrected PW6B95-D3 functional provided very good results with deviations for the free activation barrier compared to the experimental values of only about 0.5 kcal mol−1 and was therefore employed in further calculations. Corrections for intramolecular London dispersion and solvation effects in the quantum chemical treatment are essential to obtain consistent and accurate theoretical data. For the investigated radical addition reaction it turned out that the polarity of the molecules is important and that a combination of electrophilic radicals with preferably nucleophilic arenes results in the highest rate constants. This is opposite to the Minisci reaction where the radical acts as nucleophile and the arene as electrophile. The substitution at the N-atom of the aniline is crucial. Methyl substitution leads to slower addition than phenyl substitution. Carbamates as substituents are suitable only when the radical center is not too electrophilic. No correlations between free reaction barriers and energies (ΔG‡ and ΔGR are found. Addition reactions leading to indanes or dihydrobenzofurans are too slow to be useful synthetically.

Hydrolyses of 2- and 4-fluoro N-heterocycles. 3. Nucleophilic catalysis by buffer bases in the general acid catalyzed hydrolysis of 4-fluoroquinaldine

International Nuclear Information System (INIS)

Muscio, O.J. Jr.; Theobald, P.G.; Rutherford, D.R.

1989-01-01

Pseudo-first-order rate constants and catalytic rate constants are reported for the buffer-catalyzed hydrolysis of 4-fluoroquinaldine (1) in carboxylic acid and phosphoric acid buffers. The buffer catalysis is consistent with specific acid, general base catalysis. Hydrolyses in 99% 18 O-labeled acetate, indicate that the predominant catalytic mode for the acetic acid/acetate buffer system is nucleophilic catalysis by the acetate anion coupled with specific acid catalysis. The other buffers presumably react in a similar manner. A Broensted-type plot of the catalytic rate constants for hydrolysis of protonated 1 has a slope of 0.57, with formate deviating positively from the line determined by acetate, chloroacetate, monohydrogen phosphate, and water. This Broensted slope is less than that found for hydrolysis of the 2-fluoro-1-methylpyridinium ion, 2, but is still within the range expected for aromatic nucleophilic substitution. Rate constants and 18 O-labeling results for hydrolysis in acetate buffer are also reported for 4-acetoxyquinaldine (3), the proposed intermediate in the acetate-catalyzed hydrolysis of 1. 15 references, 5 figures, 3 tables

Alkoxide-induced nucleophilic trifluoromethylation using diethyl trifluoromethylphosphonate

Czech Academy of Sciences Publication Activity Database

Cherkupally, Prabhakar; Beier, Petr

2010-01-01

Roč. 51, č. 2 (2010), s. 252-255 ISSN 0040-4039 R&D Projects: GA ČR GP203/08/P310 Institutional research plan: CEZ:AV0Z40550506 Keywords : trifluoromethylation * phosphonate * nucleophilic addition Subject RIV: CC - Organic Chemistry Impact factor: 2.618, year: 2010

Influence of KF substitution on the ferroelectric phase transition of lead titanate single crystals studied by Brillouin light scattering

Directory of Open Access Journals (Sweden)

Seonhyeop Shin

2015-06-01

Full Text Available The elastic properties of KF-substituted perovskite lead titanate (PbTiO3 were investigated by dielectric measurements and Brillouin light scattering. The ferroelectric phase transition occurred at substantially lower temperature due to KF substitution, which was attributed to the modification of the covalency in Pb–O and Ti–O bonds. The longitudinal acoustic (LA mode of KF-substituted PbTiO3 showed a frequency softening in the paraelectric phase, which was accompanied by increasing acoustic damping. This indicated that polarization fluctuations responsible for the acoustic anomalies were enhanced by KF substitution.

Straightforward Entry toward Highly Substituted 2,3-Dihydrobenz[ b]oxepines by Ring Expansion of Benzopyryliums with Donor-Acceptor Diazo Compounds.

Science.gov (United States)

Courant, Thibaut; Pasco, Morgane; Lecourt, Thomas

2018-05-04

Ylide-type reactivity of diazo compounds is exploited in a new way to prepare benzo[ b]oxepines thanks to the formation of three chemical bonds and two contiguous and highly substituted stereocenters in a single pot. This cationic reaction cascade first involves addition of a donor-acceptor-substituted diazo compound to a benzopyrylium. Selective 1,2 migration of the endocyclic C-C bond then results in a ring-expansion and generates a second oxocarbenium that is trapped by a nucleophile added sequentially.

Platinum Catalyzed Ring-Opening of 1,2-Cyclopropanated Sugars with O-Nucleophiles

DEFF Research Database (Denmark)

Beyer, Jürgen; Skaanderup, Philip Robert; Madsen, Robert

1999-01-01

In the presence of a catalytic amount of Zeise's dimer 1,2-cyclopropanated sugars undergo regioselective ring-opening at C-1 with O-nucleophiles including alcohols, phenols and water to produce 2-C-branched carbohydrates.......In the presence of a catalytic amount of Zeise's dimer 1,2-cyclopropanated sugars undergo regioselective ring-opening at C-1 with O-nucleophiles including alcohols, phenols and water to produce 2-C-branched carbohydrates....

Hydroxylation of p-substituted phenols by tyrosinase: Further insight into the mechanism of tyrosinase activity

Energy Technology Data Exchange (ETDEWEB)

Munoz-Munoz, Jose Luis [GENZ - Grupo de Investigacion Enzimologia, Departamento de Bioquimica y Biologia Molecular-A, Facultad de Biologia, Campus Internacional de Excelencia Campus Mare Nostrum, Universidad de Murcia, E-30100 Espinardo, Murcia (Spain); Berna, Jose [Grupo de Quimica Organica Sintetica, Departamento de Quimica Organica, Facultad de Quimica Campus Internacional de Excelencia Campus Mare Nostrum, Universidad de Murcia (Spain); Garcia-Molina, Maria del Mar; Garcia-Molina, Francisco [GENZ - Grupo de Investigacion Enzimologia, Departamento de Bioquimica y Biologia Molecular-A, Facultad de Biologia, Campus Internacional de Excelencia Campus Mare Nostrum, Universidad de Murcia, E-30100 Espinardo, Murcia (Spain); Garcia-Ruiz, Pedro Antonio [QCPAI - Grupo de Quimica de Carbohidratos, Polimeros y Aditivos Industriales, Departamento de Quimica Organica, Facultad de Quimica Campus Internacional de Excelencia Campus Mare Nostrum, Universidad de Murcia (Spain); Varon, Ramon [Departamento de Quimica-Fisica, Escuela de Ingenieros Industriales de Albacete, Universidad de Castilla la Mancha, Avda. Espana s/n. Campus Universitario, E-02071 Albacete (Spain); and others

2012-07-27

Highlights: Black-Right-Pointing-Pointer The action the copper complexes and tyrosinase on phenols is equivalent. Black-Right-Pointing-Pointer Isotope effect showed that nucleophilic attack to copper atom may be the slower step. Black-Right-Pointing-Pointer The value of {rho} (Hammett constant) supports an electrophilic aromatic substitution. Black-Right-Pointing-Pointer Data obtained in steady state pH 7 conditions support the mechanism of Scheme 1SM. -- Abstract: A study of the monophenolase activity of tyrosinase by measuring the steady state rate with a group of p-substituted monophenols provides the following kinetic information: k{sub cat}{sup m} and the Michaelis constant, K{sub M}{sup m}. Analysis of these data taking into account chemical shifts of the carbon atom supporting the hydroxyl group ({delta}) and {sigma}{sub p}{sup +}, enables a mechanism to be proposed for the transformation of monophenols into o-diphenols, in which the first step is a nucleophilic attack on the copper atom on the form E{sub ox} (attack of the oxygen of the hydroxyl group of C-1 on the copper atom) followed by an electrophilic attack (attack of the hydroperoxide group on the ortho position with respect to the hydroxyl group of the benzene ring, electrophilic aromatic substitution with a reaction constant {rho} of -1.75). These steps show the same dependency on the electronic effect of the substituent groups in C-4. Furthermore, a study of a solvent deuterium isotope effect on the oxidation of monophenols by tyrosinase points to an appreciable isotopic effect. In a proton inventory study with a series of p-substituted phenols, the representation of k{sub cat}{sup f{sub n}}/k{sub cat}{sup f{sub 0}} against n (atom fractions of deuterium), where k{sub cat}{sup f{sub n}} is the catalytic constant for a molar fraction of deuterium (n) and k{sub cat}{sup f{sub 0}} is the corresponding kinetic parameter in a water solution, was linear for all substrates. These results indicate that

Electronic forces as descriptors of nucleophilic and electrophilic regioselectivity and stereoselectivity.

Science.gov (United States)

Liu, Shubin; Rong, Chunying; Lu, Tian

2017-01-04

One of the main tasks of theoretical chemistry is to rationalize computational results with chemical insights. Key concepts of such nature include nucleophilicity, electrophilicity, regioselectivity, and stereoselectivity. While computational tools are available to predict barrier heights and other reactivity properties with acceptable accuracy, a conceptual framework to appreciate above quantities is still lacking. In this work, we introduce the electronic force as the fundamental driving force of chemical processes to understand and predict molecular reactivity. It has three components but only two are independent. These forces, electrostatic and steric, can be employed as reliable descriptors for nucleophilic and electrophilic regioselectivity and stereoselectivity. The advantages of using these forces to evaluate molecular reactivity are that electrophilic and nucleophilic attacks are featured by distinct characteristics in the electrostatic force and no knowledge of quantum effects included in the kinetic and exchange-correlation energies is required. Examples are provided to highlight the validity and general applicability of these reactivity descriptors. Possible applications in ambident reactivity, σ and π holes, frustrated Lewis pairs, and stereoselective reactions are also included in this work.

Synthesis of D-fructose-derived spirocyclic 2-substituted-2-oxazoline ribosides

Directory of Open Access Journals (Sweden)

Madhuri Vangala

2015-11-01

Full Text Available The TMSOTf-mediated synthesis of β-configured spirocyclic 2-substituted-2-oxazoline ribosides was achieved using a “Ritter-like” reaction in toluene through nucleophilic addition of electron-rich nitriles to the oxacarbenium ion intermediate of 1,2;3,4-di-O-isopropylidene-β-D-psicofuranose derivatives with concomitant intramolecular trapping of the C2 hydroxymethyl group on the electrophilic nitrilium carbon. These carbohydrate-derived spirooxazolines are stable and were obtained in good yield with high stereoselectivity due to the conformational rigidity imparted by the 3,4-isopropylidene group.

The Study of Substitution and Elimination Reactions Using Gas Chromatography: An Examination of the Effects of Alkane and Base Structure on Product Distributions

Science.gov (United States)

Wharry, Donald L.

2011-01-01

An experiment that compares product distribution obtained by either substitution or elimination utilizing alkyl bromides and methoxide, ethoxide, or t-butoxide as the base (or nucleophile) is described. The change in product distribution caused by steric effects of the base and substrate are readily apparent. Prior work on this experiment focused…

Regioselective Nucleophilic Ring Opening of Epoxides and Aziridines derived from Homoallylic Alcohols

DEFF Research Database (Denmark)

Tanner, David Ackland; Groth, Thomas

1997-01-01

The regioselectivity of nucleophilic ring opening of some 3,4-epoxy and 3,4-aziridino alcohols has been studied. The nucleophiles chosen were complex hydrides (LiAlH4, Red-Al and DIBAL) and Lipshutz- or Gilman-type organocuprate reagents. The C-4 substituent in the substrates was varied in order...... to study steric and electronic effects on the ring opening reactions. For alkyl substituents at C-4, most of the results can be explained on the basis of intramolecular delivery of the nucleophile to C-3 via a six-membered transition state, leading to 1,4-diols or 1,4-amino alcohol derivatives. In general......, the epoxy alcohols gave poorer regioselectivity than the N-tosyl aziridino alcohols, for which selectivities of >95:5 were routinely obtained. The activating effect of a phenyl group at C-4 led to a switch in regiochemistry, with the 1,3-diol or 1,3-amino alcohol derivative as the major product. (C) 1997...

Solid-Phase Reactions of Iminium Ions: Cyclized Peptide Derivatives

DEFF Research Database (Denmark)

Wang, Yuanyuan

formation of N,N’-aminals by nucleophilic attack of the peptide backbone is reversible under strongly acidic conditions and the N,N’-aminal is likely to be the kinetic product of many INCIC reactions. In addition, the N,N’-aminals are stable in the absence of acid but could be converted to the THIQ...... derivatives in solution phase under acid conditions in the presence of an active C-nucleophile in the side chain. The high yielding nature of the aminal formation is confirmed by solution phase synthesis. The introduced azide and alkyne residues in the side chain of N,N’-aminal products were further......BB may undergo auto-oxidation to quinazoline-2,4-diones in the absence of a suitable nucleophile on the side chain or backbone of the peptide (Chapter 4). The structure is confirmed by comparison with products obtained from solution-phase synthesis under the same conditions, one of which was confirmed...

Use of fluorine-18 free of carrier for the synthesis of 2-[18 F]-fluoro-2-deoxy-d-glucose by nucleophilic substitution

International Nuclear Information System (INIS)

Garcia S, I.; Ramirez, F.M.

1990-11-01

Preliminary studies on the synthesis of 2 - [ 18 F]-fluoro-2-deoxy-d-glucose (2 - [ 18 F]-FDG) were carried out by means of the nucleophilic method proposed by K. Hamacher and the 18 F obtained in the Nuclear Reactor TRIGA Mark III of the Nuclear Center of Mexico. For the control of radiochemical quality it was used the chromatography technique in paper and silica gel with 4 solvent systems. The identification of the marked species with 18 F was carried out by means of comparison of its Rf with the Rf of the obtained not radioactive species, using the same synthesis method. (Author)

Electronic structure and phase equilibria in ternary substitutional alloys

International Nuclear Information System (INIS)

Traiber, A.J.S.; Allen, S.M.; Waterstrat, R.M.

1996-01-01

A reliable, consistent scheme to study phase equilibria in ternary substitutional alloys based on the tight-binding approximation is presented. With electronic parameters from linear muffin-tin orbital calculations, the computed density of states and band structures compare well with those from more accurate abinitio calculations. Disordered alloys are studied within the tight-binding coherent-potential approximation extended to alloys; energetics of ordered systems are obtained through effective pair interactions computed with the general perturbation method; and partially ordered alloys are studied with a novel simplification of the molecular coherent-potential approximation combined with the general perturbation method. The formalism is applied to bcc-based Zr-Ru-Pd alloys which are promising candidates for medical implant devices. Using energetics obtained from the above scheme, we apply the cluster- variation method to study phase equilibria for particular pseudo- binary alloys and show that results are consistent with observed behavior of electronic specific heat coefficient with composition for Zr 0.5 (Ru, Pd) 0.5

New dinuclear palladium(II) complexes: Studies of the nucleophilic substitution reactions, DNA/BSA interactions and cytotoxic activity.

Science.gov (United States)

Ćoćić, Dušan; Jovanović, Snežana; Nišavić, Marija; Baskić, Dejan; Todorović, Danijela; Popović, Suzana; Bugarčić, Živadin D; Petrović, Biljana

2017-10-01

Six new dinuclear Pd(II) complexes, [{Pd(2,2'-bipy)Cl} 2 (μ-pz)](ClO 4 ) 2 (Pd1), [{Pd(dach)Cl} 2 (μ-pz)](ClO 4 ) 2 (Pd2), [{Pd(en)Cl} 2 (μ-pz)](ClO 4 ) 2 (Pd3), [{Pd(2,2'-bipy)Cl} 2 (μ-4,4'-bipy)](ClO 4 ) 2 (Pd4), [{Pd(dach)Cl} 2 (μ-4,4'-bipy)](ClO 4 ) 2 (Pd5) and [{Pd(en)Cl} 2 (μ-4,4'-bipy)](ClO 4 ) 2 (Pd6) (where 2,2'-bipy=2,2'-bipyridyl, pz=pyrazine, dach=trans-(±)-1,2-diaminocyclohexane, en=ethylenediamine, 4,4'-bipy=4,4'-bipyridyl) have been synthesized and characterized by elemental microanalysis, IR, 1 H NMR and MALDI-TOF mass spectrometry. The pK a values of corresponding diaqua complexes were determined by spectrophotometric pH titration. Substitution reactions with thiourea (Tu), l-methionine (l-Met), l-cysteine (l-Cys), l-histidine (l-His) and guanosine-5'-monophosphate (5'-GMP) were studied under the pseudo-first order conditions at pH7.2. Reactions of Pd1 with Tu, l-Met and l-Cys were followed by decomposition of complexes, while structures of dinuclear complexes were preserved during the substitution with nitrogen donors. Interactions with calf-thymus DNA (CT-DNA) were followed by absorption spectroscopy and fluorescence quenching measurements. All complexes can bind to CT-DNA exhibiting high intrinsic binding constants (K b =10 4 -10 5 M -1 ). Competitive studies with ethidium bromide (EB) have shown that complexes can displace DNA-bound EB. High values of binding constants towards bovine serum albumin protein (BSA) indicate good binding affinity. Finally, all complexes showed moderate to high cytotoxic activity against HeLa (human cervical epithelial carcinoma cell lines) and MDA-MB-231 (human breast epithelial carcinoma cell lines) tumor cell lines inducing apoptotic type cell death, whereas normal fibroblasts were significantly less sensitive. The impact on cell cycle of these cells was distinctive, where Pd4, Pd5 and Pd6 showed the most prominent effect arresting MDA-MB-231 (human lung fibroblast cell lines) cell in G1/S phase of cell

Diethyl Fluoronitromethylphosphonate: Synthesis and Application in Nucleophilic Fluoroalkyl Additions

Czech Academy of Sciences Publication Activity Database

Opekar, Stanislav; Pohl, Radek; Beran, Pavel; Rulíšek, Lubomír; Beier, Petr

2014-01-01

Roč. 20, č. 5 (2014), s. 1453-1458 ISSN 0947-6539 R&D Projects: GA ČR GP203/08/P310 Institutional support: RVO:61388963 Keywords : C1 building blocks * fluorine * nucleophilic addition * phosphanes * synthetic methods Subject RIV: CC - Organic Chemistry Impact factor: 5.731, year: 2014

Nucleophilic tetrafluoroethylation of carbonyl compounds with fluorinated sulfones

Czech Academy of Sciences Publication Activity Database

Václavík, Jiří; Chernykh, Yana; Jurásek, Bronislav; Beier, Petr

2015-01-01

Roč. 169, Jan (2015), s. 24-31 ISSN 0022-1139 R&D Projects: GA ČR GAP207/11/0421 Grant - others:GA MŠk(CZ) ED3.2.00/08.0144; GA MŠk(CZ) LM2010005 Institutional support: RVO:61388963 Keywords : fluorine * tetrafluoroethylation * sulfones * nucleophilic addition * carbonyl compounds Subject RIV: CC - Organic Chemistry Impact factor: 2.213, year: 2015

Breaking the Dogma of Aldolase Specificity: Simple Aliphatic Ketones and Aldehydes are Nucleophiles for Fructose-6-phosphate Aldolase.

Science.gov (United States)

Roldán, Raquel; Sanchez-Moreno, Israel; Scheidt, Thomas; Hélaine, Virgil; Lemaire, Marielle; Parella, Teodor; Clapés, Pere; Fessner, Wolf-Dieter; Guérard-Hélaine, Christine

2017-04-11

d-Fructose-6-phosphate aldolase (FSA) was probed for extended nucleophile promiscuity by using a series of fluorogenic substrates to reveal retro-aldol activity. Four nucleophiles ethanal, propanone, butanone, and cyclopentanone were subsequently confirmed to be non-natural substrates in the synthesis direction using the wild-type enzyme and its D6H variant. This exceptional widening of the nucleophile substrate scope offers a rapid entry, in good yields and high stereoselectivity, to less oxygenated alkyl ketones and aldehydes, which was hitherto impossible. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Living Polymerization of N -Substituted β-Alanine N -Carboxyanhydrides: Kinetic Investigations and Preparation of an Amphiphilic Block Copoly-β-Peptoid

KAUST Repository

Grossmann, Arlett

2012-07-03

Poly(α-peptoid)s (N-substituted polyglycines) are interesting peptidomimetic biomaterials that have been discussed for many applications. Poly(β-peptoid)s (N-substituted poly-β-alanines), although equally intriguing, have received much less attention. Here we present results that suggest that while N-substituted β-alanine N-carboxyanhydrides can undergo a living nucleophilic ring-opening polymerization, the solubility of poly(β-peptoid)s can be very poor, which contributes to the limited accessibility using other synthetic approaches. The living character of the polymerization was utilized for the preparation of the first polymerized amphiphilic block copoly-β-peptoid. Our results may open a new route towards highly defined functional poly(β-peptoid)s which could represent biomaterials. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nucleophilic ring opening reactions of aziridines.

Science.gov (United States)

Akhtar, Rabia; Naqvi, Syed Ali Raza; Zahoor, Ameer Fawad; Saleem, Sameera

2018-05-04

Aziridine ring opening reactions have gained tremendous importance in the synthesis of nitrogen containing biologically active molecules. During recent years, a great effort has been put forward by scientists toward unique bond construction methodologies via ring opening of aziridines. In this regard, a wide range of chiral metal- and organo-catalyzed desymmetrization reactions of aziridines have been reported with carbon, sulfur, oxygen, nitrogen, halogen, and other nucleophiles. In this review, an outline of methodologies adopted by a number of scientists during 2013-2017 for aziridine ring opening reactions as well as their synthetic applications is described.

Computational Study of Chemical Reactivity Using Information-Theoretic Quantities from Density Functional Reactivity Theory for Electrophilic Aromatic Substitution Reactions.

Science.gov (United States)

Wu, Wenjie; Wu, Zemin; Rong, Chunying; Lu, Tian; Huang, Ying; Liu, Shubin

2015-07-23

The electrophilic aromatic substitution for nitration, halogenation, sulfonation, and acylation is a vastly important category of chemical transformation. Its reactivity and regioselectivity is predominantly determined by nucleophilicity of carbon atoms on the aromatic ring, which in return is immensely influenced by the group that is attached to the aromatic ring a priori. In this work, taking advantage of recent developments in quantifying nucleophilicity (electrophilicity) with descriptors from the information-theoretic approach in density functional reactivity theory, we examine the reactivity properties of this reaction system from three perspectives. These include scaling patterns of information-theoretic quantities such as Shannon entropy, Fisher information, Ghosh-Berkowitz-Parr entropy and information gain at both molecular and atomic levels, quantitative predictions of the barrier height with both Hirshfeld charge and information gain, and energetic decomposition analyses of the barrier height for the reactions. To that end, we focused in this work on the identity reaction of the monosubstituted-benzene molecule reacting with hydrogen fluoride using boron trifluoride as the catalyst in the gas phase. We also considered 19 substituting groups, 9 of which are ortho/para directing and the other 9 meta directing, besides the case of R = -H. Similar scaling patterns for these information-theoretic quantities found for stable species elsewhere were disclosed for these reactions systems. We also unveiled novel scaling patterns for information gain at the atomic level. The barrier height of the reactions can reliably be predicted by using both the Hirshfeld charge and information gain at the regioselective carbon atom. The energy decomposition analysis ensued yields an unambiguous picture about the origin of the barrier height, where we showed that it is the electrostatic interaction that plays the dominant role, while the roles played by exchange-correlation and

Benzimidazoles and benzoxazoles via the nucleophilic addition of anilines to nitroalkanes.

Science.gov (United States)

Aksenov, Alexander V; Smirnov, Alexander N; Aksenov, Nicolai A; Bijieva, Asiyat S; Aksenova, Inna V; Rubin, Michael

2015-04-14

PPA-induced umpolung triggers efficient nucleophilic addition of unactivated anilines to nitroalkanes to produce N-hydroxyimidamides. The latter undergo sequential acid-promoted cyclocondensation with ortho-OH or ortho-NHR moieties to afford benzoxazoles and benzimidazoles, respectively.

One-pot facile synthesis of 4-amino-1,8-naphthalimide derived Tröger's bases via a nucleophilic displacement approach.

Science.gov (United States)

Shanmugaraju, Sankarasekaran; McAdams, Deirdre; Pancotti, Francesca; Hawes, Chris S; Veale, Emma B; Kitchen, Jonathan A; Gunnlaugsson, Thorfinnur

2017-09-13

We report here a novel one-pot synthetic strategy for the synthesis of a family of N-alkyl-1,8-naphthalimide based Tröger's bases via a nucleophilic substitution reaction of a common 'precursor' (or a 'synthon') N-aryl-1,8-naphthalimide Tröger's base heated at 80 °C in neat aliphatic primary amine, in overall yield of 65-96%. This methodology provides an efficient and one-step facile route to design 1,8-naphthalimide derived Tröger's base structures in analytically pure form without the use of column chromatography purification, that can be used in medicinal chemistry and as supramolecular scaffolds. We also report the formation of the corresponding anhydride, and the crystallographic analysis of two of the resulting products, that of the N-phenyl-4-amino-1,8-naphthalimide and the anhydride derived Tröger's bases.

Effects of the Substitution of the Mo Element W of Super Duplex Stainless Steel Weld on the Secondary Phase Formation and Corrosion Resistance

Energy Technology Data Exchange (ETDEWEB)

Park, Hae-Ji; Lee, Hae-Woo [Dong-A University, Busan (Korea, Republic of)

2014-03-15

To investigate the effect of tungsten substitution of molybdenum on the formation of the second phase in Super Duplex Stainless Steel Weldments, welding wires with a composition of 3 wt% Mo, 2.2 wt% Mo-2.2 wt% W were designed for the flux cored arc welding process. As a result, the precipitation of the χ phase and σ phase increased in proportion to the decrease in the amount of δ ferrite content because the reaction, δ ferrite → σ + γ2, proceeded as the temperature rose. Under the same experimental conditions, the precipitation of the second phase, which degrades the properties of the material, was significantly reduced in the W substitution specimens compared to the Mo-only specimens. A polarization test conducted in a salt solution revealed that the pitting potential of the W substitution specimens was higher than that of the Mo-only specimens.

Effect of Se substitution on the phase change properties of Ge2Sb2Te5

Science.gov (United States)

Shekhawat, Roopali; Rangappa, Ramanna; Gopal, E. S. R.; Ramesh, K.

2018-05-01

Ge2Sb2Te5 popularly known as GST is being explored for non-volatile phase change random access memory(PCRAM) applications. Under high electric field, thin films of amorphous GST undergo a phase change from amorphous to crystalline with a high contrast in electrical resistivity (about 103). The phase change is between amorphous and metastable NaCl structure occurs at about 150°C and not to the stable hexagonal phase which occurs at a high temperature (> 250 °C). In GST, about 50 % of Te substituted by Se (Ge2Sb2Te2.5Se2.5) is found to increase the contrast in electrical resistivity by 7 orders of magnitude (about 4 orders of magnitude higher than GST). The phase transition in Se added GST also found to be between amorphous and the stable hexagonal structure. The threshold voltage at which the Ge2Sb2Te2.5Se2.5 switches to the high conducting state increases to 9V as compared to 2V in GST. Interestingly, the threshold current decrease to 1mA as compared to 1.8mA in GST indicating the Se substitution reduces the power needed for switching between the low and high conducting states. The reduction in power needed for phase change, high contrast in electrical resistivity with high thermal stability makes Ge2Sb2Te2.5Se2.5 as a better candidate for PCRAM.

Gas-Phase Reactivity of Microsolvated Anions

DEFF Research Database (Denmark)

Thomsen, Ditte Linde

the gas-phase α-effect. The experimental studies are performed by means of the flowing after glow selected ion flow tube technique, and these are supplemented by electronic structure calculations. The α-nucleophile employed is the microsolvated hydrogen peroxide anion whose reactivity is compared......Gas-phase studies of ion-molecule reactions shed light on the intrinsic factors that govern reactivity; and even solvent effects can be examined in the gasphase environment by employing microsolvated ions. An area that has received considerable attention with regard to the interplay between...... to that of a series of microsolvated oxygen centered anions. The association of the nucleophiles with a single water or methanol molecule allows the α-effect to be observed in the SN2 reaction with methyl chloride; this effect was not apparent in the reactions of the unsolvated anions. The results suggest...

Easy access to nucleophilic boron through diborane to magnesium boryl metathesis

Science.gov (United States)

Pécharman, Anne-Frédérique; Colebatch, Annie L.; Hill, Michael S.; McMullin, Claire L.; Mahon, Mary F.; Weetman, Catherine

2017-04-01

Organoboranes are some of the most synthetically valuable and widely used intermediates in organic and pharmaceutical chemistry. Their synthesis, however, is limited by the behaviour of common boron starting materials as archetypal Lewis acids such that common routes to organoboranes rely on the reactivity of boron as an electrophile. While the realization of convenient sources of nucleophilic boryl anions would open up a wealth of opportunity for the development of new routes to organoboranes, the synthesis of current candidates is generally limited by a need for highly reducing reaction conditions. Here, we report a simple synthesis of a magnesium boryl through the heterolytic activation of the B-B bond of bis(pinacolato)diboron, which is achieved by treatment of an easily generated magnesium diboranate complex with 4-dimethylaminopyridine. The magnesium boryl is shown to act as an unambiguous nucleophile through its reactions with iodomethane, benzophenone and N,N'-di-isopropyl carbodiimide and by density functional theory.

Nucleophilic additions of [(diethoxyphosphoryl)difluoromethyl]lithium to a,b-unsaturated compounds

Czech Academy of Sciences Publication Activity Database

Cherkupally, Prabhakar; Beier, Petr

2012-01-01

Roč. 137, May (2012), s. 34-43 ISSN 0022-1139 R&D Projects: GA ČR GP203/08/P310 Institutional research plan: CEZ:AV0Z40550506 Keywords : 1,4-Addition * nucleophilic addition * difluoromethylphosphonate Subject RIV: CC - Organic Chemistry Impact factor: 1.939, year: 2012

Nucleophilic difluoromethylenation of aldehydes and ketones using diethyl difluoro(trimethylsilyl)methylphosphonate

Czech Academy of Sciences Publication Activity Database

Alexandrova, Anastasia; Beier, Petr

2009-01-01

Roč. 130, č. 5 (2009), s. 493-500 ISSN 0022-1139 R&D Projects: GA ČR GP203/08/P310 Institutional research plan: CEZ:AV0Z40550506 Keywords : phosphonates * phosphates * nucleophilic additions * difluoromethylene Subject RIV: CC - Organic Chemistry Impact factor: 1.730, year: 2009

Synthesis and Structural Characterization of 1- and 2-Substituted Indazoles: Ester and Carboxylic Acid Derivatives

Directory of Open Access Journals (Sweden)

Isabel Bento

2006-11-01

Full Text Available A series of indazoles substituted at the N-1 and N-2 positions with ester-containing side chains -(CH2nCO2R of different lengths (n = 0-6, 9, 10 are described.Nucleophilic substitution reactions on halo esters (X(CH2nCO2R by 1H-indazole inalkaline solution lead to mixtures of N-1 and N-2 isomers, in which the N-1 isomerpredominates. Basic hydrolysis of the ester derivatives allowed the synthesis of thecorresponding indazole carboxylic acids. All compounds were fully characterised bymultinuclear NMR and IR spectroscopies, MS spectrometry and elemental analysis; theNMR spectroscopic data were used for structural assignment of the N-1 and N-2 isomers.The molecular structure of indazol-2-yl-acetic acid (5b was determined by X-raydiffraction, which shows a supramolecular architecture involving O2-H...N1intermolecular hydrogen bonds.

Synthesis of carbasugars from aldonolactones, part III - A study on the allylic substitution of (1R,5R,8R)- and (1R,5R,8S)-8-hydroxy-2-oxabicyclo[3.3.0]oct-6-en-3-one derivatives - Preparation of (1S,2R,3R)-9-[2-hydroxy-3-(2-hydroxyethyl)cyclopent-4-en-1-yl]-9H-adenine

DEFF Research Database (Denmark)

Johansen, Steen Karsk; Lundt, Inge

2001-01-01

The palladium-catalyzed substitution of acylated (1R,5R,8R)- and (1R,SR,8S)-8-hydroxy-2-oxabicyclo[3.3.0] ones has been studied using a number of C- and N-nucleophiles, In all cases, the exo derivatives (8R) were found to be more reactive than the corresponding endo derivatives (8S). The reaction...... with these nucleophiles. Additionally, Mitsunobu substitution of (1R,5R,8R)-8-hydroxy-2-oxabicyclo[3.3.0]oct-B-en-3-one (3) with 6-chloropurine, followed by reduction of the lactone moiety and treatment with Liquid ammonia, gave the carbocyclic nucleoside (1S,2R,3R)-9-[2-hydroxy-3-(2-hydroxyethyl)cyclopent-4-en-1-yl]-9H...

Kinetic secondary deuterium isotope effect in addition of nucleophile to m-bromobenzaldehyde

International Nuclear Information System (INIS)

Amaral, L. do; Rossi, M.H.

1985-01-01

The kinetic secondary deuterium isotope effects, KD/KH for hydrated proton catalyzed addition of semicarbazide, methoxyamine and hydroxylamine to m-bromobenzaldehyde is studied. The nature of the nucleophile, addition of the carbonyl group and the chemical reactions are evaluated. (M.J.C.) [pt

Reactions of aromatic diazonium salts with unsaturated compounds in the presence of nucleophiles

Science.gov (United States)

Grishchuk, B. D.; Gorbovoi, P. M.; Ganushchak, N. I.; Dombrovskii, A. V.

1994-03-01

The review surveys the reactions of aromatic diazonium salts with diene and monounsaturated compounds in the presence of nucleophiles. Certain further reactions of the reaction products and their application are considered. The bibliography includes 63 references.

Aromatic substitution in the gas phase. Alkylation of arenes by gaseous C4H9+ cations

International Nuclear Information System (INIS)

Cacace, F.; Ciranni, G.; Giacomello, P.

1981-01-01

Butyl cations, obtained in the dilute gas state from the radiolysis of butane in the pressure range from 70 to 750 torr, have been allowed to react with benzene, toluene, and their mixtures or with trace amounts of o-xylene in the gaseous system. The gas-phase butylation yields invariably sec-butylarenes, remarkably free of isomeric byproducts, namely n- and tert-butylarenes. Other alkylation experiments, where gaseous butyl cations from the reaction of butane with radiolytically formed H 3 + ions were used as reagent, confirmed the exclusive formation of sec-butylarenes. The butylation process displays the positional and substrate selectivity and the dependence of orientation on the pressure of the system, typical of other gas-phase ionic substitutions. At high pressures, orth-para orientation predominates in the sec-butylation of toluene, with a ortho:meta:para ratio of 43:30:27 at 715 torr. As the pressure is reduced, a gradual shift in favor of the thermodynamically most stable meta-substituted arenium ion is observed, leading to a ortho:meta:para ratio of 31:48:21 at 70 torr

Influence of Alkali Metal Substitution on the Phase Transition Behavior of CsGaQ2 (Q = S, Se

Directory of Open Access Journals (Sweden)

Daniel Friedrich

2017-12-01

Full Text Available The formation of solid solution series Cs1−xMxGaQ2-mC64 (M = K, Rb; Q = S, Se; x = 0–1 was studied by X-ray diffraction and spectroscopic methods, revealing a complete miscibility of CsGaQ2-mC64 with RbGaQ2 and KGaSe2, and a large miscibility gap with KGaS2. All solid solution members exhibit similar Raman spectra, indicating the covalent Ga-Q bonding character. The similar optical band gaps likewise further contribute to this conclusion. Up to a certain degree of substitution, these solid solutions undergo a phase transition similar to CsGaQ2-mC64. The influence of the substitution parameter x on phase transition process was investigated in situ using high-temperature X-ray powder diffraction experiments. Phase-pure solid solutions of the high-temperature polymorphs Cs1−xMxGaQ2-mC16 were obtained up to xmax(K = 0.1 and xmax(Rb = 0.3. The crystal structures of these new CsGaQ2-mC16 analogous high-temperature phases were refined from synchrotron diffraction data by Rietveld-refinement.

Copper-Catalyzed Electrophilic Amination of Organoaluminum Nucleophiles with O-Benzoyl Hydroxylamines.

Science.gov (United States)

Zhou, Shuangliu; Yang, Zhiyong; Chen, Xu; Li, Yimei; Zhang, Lijun; Fang, Hong; Wang, Wei; Zhu, Xiancui; Wang, Shaowu

2015-06-19

A copper-catalyzed electrophilic amination of aryl and heteroaryl aluminums with N,N-dialkyl-O-benzoyl hydroxylamines that affords the corresponding anilines in good yields has been developed. The catalytic reaction proceeds very smoothly under mild conditions and exhibits good substrate scope. Moreover, the developed catalytic system is also well suited for heteroaryl aluminum nucleophiles, providing facile access to heteroaryl amines.

Synthesis of 2β-carbomethoxy-3β-(4-[76Br]bromophenyl)tropane ([76Br]β-CBT), a PET tracer for in vivo imaging of the dopamine uptake sites

International Nuclear Information System (INIS)

Loc'h, Christian; Ottaviani, Michele; Maziere, Bernard; Mueller, Lars; Halldin, Christer; Farde, Lars

1995-01-01

2β-carbomethoxy-3β-(4-[ 76 Br]bromophenyl)tropane ([ 76 Br]β-CBT) was prepared either by electrophilic substitution from the tributyl-stannyl derivative and peracetic acid as oxidant or by nucleophilic substitution from the iodo analogue (β-CIT) and a Cu + assisted bromodeiodination exchange. After purification by solid phase extraction and reverse phase HPLC, the chemical and radiochemical purities of [ 76 Br]β-CBT were >98% and the specific radioactivity was 20 GBq/μmol. Using the two labelling techniques, the radiochemical yields were 80% and 60%, respectively. From the deshalogeno compound and different oxidizing conditions, the radiolabelling yields were <5%. (Author)

Novel complex MAD phasing and RNase H structural insights using selenium oligonucleotides

Energy Technology Data Exchange (ETDEWEB)

Abdur, Rob; Gerlits, Oksana O.; Gan, Jianhua; Jiang, Jiansheng; Salon, Jozef; Kovalevsky, Andrey Y.; Chumanevich, Alexander A.; Weber, Irene T.; Huang, Zhen, E-mail: huang@gsu.edu [Georgia State University, Atlanta, GA 30303 (United States)

2014-02-01

Selenium-derivatized oligonucleotides may facilitate phase determination and high-resolution structure determination for protein–nucleic acid crystallography. The Se atom-specific mutagenesis (SAM) strategy may also enhance the study of nuclease catalysis. The crystal structures of protein–nucleic acid complexes are commonly determined using selenium-derivatized proteins via MAD or SAD phasing. Here, the first protein–nucleic acid complex structure determined using selenium-derivatized nucleic acids is reported. The RNase H–RNA/DNA complex is used as an example to demonstrate the proof of principle. The high-resolution crystal structure indicates that this selenium replacement results in a local subtle unwinding of the RNA/DNA substrate duplex, thereby shifting the RNA scissile phosphate closer to the transition state of the enzyme-catalyzed reaction. It was also observed that the scissile phosphate forms a hydrogen bond to the water nucleophile and helps to position the water molecule in the structure. Consistently, it was discovered that the substitution of a single O atom by a Se atom in a guide DNA sequence can largely accelerate RNase H catalysis. These structural and catalytic studies shed new light on the guide-dependent RNA cleavage.

Ring rearrangements and reactivity of 3-((4-oxo-4H-chromen-3-ylmethylene-4-phenyl-1H-[1,5]benzodiazepin-2(3H-one toward some nucleophiles

Directory of Open Access Journals (Sweden)

Hanan Salah

2017-05-01

Full Text Available Condensation of 4-phenyl-1H-[1,5]benzodiazepin-2(3H-one (1 with 3-formylchromone (2 afforded a mixture of 3-(chromenylmethylene[1,5]benzodiazepinone 3 and 14-chromenylbenzodiazepino[2,3:6,5]pyrano[2,3-b]benzodiazepine 4. Ring rearrangements of compound 3 with different nucleophilic reagents, such as potassium hydroxide and/or ammonium acetate led to rearrangement into pyranobenzodiazepine 5 and pyridobenzodiazepine 6, respectively. Treatment of compound 3 with hydrazine hydrate, hydroxylamine hydrochloride, malononitrile, cyanothioacetamide, 2-cyano-3,3-disufanylacrylonitrile, and/or 2-cyano-3-phenylamino-3-sufanylacrylonitrile, has been carried out at different conditions, leading to versatile heterocyclic substituted benzodiazepines at position 3, viz. pyrazole 8, isoxazole 9, pyridines 10 and 11, 1,3-dithiine 12, and 1,3-thiazine 13 derivatives.

Manganese substitutions into the portland cement clinker phases

Directory of Open Access Journals (Sweden)

Puertas, F.

1989-06-01

Full Text Available The effect of manganese substitution into the crystal structures of the main Portland cement clinker phases (3CaO.SiO₂, 2CaO.SiO₂, 3CaO.Al₂O₃, 2CaO.Fe₂O₃ y 4CaO.Al₂O₃.Fe₂O₃ has been studied by X-ray and analytical electron microscopy. In oxidizing conditions, the limit of solid solution in 3CaO.SiO₂ is about 0.72 ±0.11% (wt, while in 2CaO.SiO₂ is 1.53±0,12%(wt. Mn solid solubility on 3CaO.Al₂O₃structure, in oxidizing conditions is close to 0.78 ± 0,12% (wt. In identical atmosphere, the proportion of Mn in the ferrite phases (2CaO.Fe₂O₃ and 4CaO.Al₂O₃.Fe₂O₃ is 6.80 ± 0.87% (wt and 6.7% (wt, respectively. To each mentioned clinker phases a solid solution formula has been proposed. In these formula, the manganese substitutions and also the different oxidation states which this element can be introduced in those crystalline structure are defined.

Se ha estudiado, por difracción de rayos X y microanálisis por espectroscopia de energías dispersivas, el efecto de la sustitución del manganeso en las estructuras cristalinas de las fases más importantes del clinker del cemento portland (3CaO.SiO₂, 2CaO.SiO₂, 3CaO.Al₂O₃, 2CaO.Fe₂O₃ y 4CaO.Al₂O₃.Fe₂O₃. En condiciones oxidantes, el límite de solubilidad sólida en 3CaO.SiO₂ es del orden de 0,72 ± 0,11% en peso; mientras que en 2CaO.SiO₂ es de 1,53 ±0,12% en peso. La solución sólida del Mn en la estructura del 3CaO.Al₂O₃, en condiciones oxidantes, es próxima al 0,78 ±0,12% en peso. En idéntica atmósfera, la proporción del Mn en las fases terríficas (2CaO.Fe₂O₃ y 4CaO.Al₂

A theoretical quantum study on the distribution of electrophilic and nucleophilic active sites on Cu(100) surfaces modeled as finite clusters

International Nuclear Information System (INIS)

Rios R, C.H.; Romero R, M.; Ponce R, A.; Mendoza H, L.H.

2008-01-01

In this work, it is shown a theoretical quantum study of the active sites distribution on a monocrystalline surface of Cu(100). The copper surface was modeled as finite clusters of 14, 23, 38 and 53 atoms. We performed Hartree-Fock and Density Functional Theory (B3LYP) ab initio calculations employing the pseudopotentials of Hay and Wadt (LANLlMB y LANL2DZ). From calculations, we found a work function value of 4.1 eV. The mapping of the HOMO and LUMO in the frozen core approximation, allowed us finding the electrophilic and nucleophilic active sites distribution, respectively. The results indicated that electrophilic sites on the Cu(100) surface were located on hollow position and its numerical density was 8.6 x 10 16 sites cm -2 . From the nucleophilic local softness study, it was found that the nucleophilic sites were formed by a group of atoms and it had a numerical density of 2.4x 10 16 sitescm -2 . Last results indicated that adsorptions with 2 x 2 and 3 x 3 distributions can be favored onto a Cu(100) surface for the electrophilic and nucleophilic cases, respectively. (Author)

Magnetic and dielectric studies of Fe substituted sillenite phase bismuth cobaltite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Ray, J.; Biswal, A.K.; Kuila, S.; Vishwakarma, P.N., E-mail: prakashn@nitrkl.ac.in

2015-06-05

Highlights: • The samples prepared under ambient conditions, crystalizes in sillenite phase. • Ferrimagnetic ordering in BCO occurs at 30 K, with no bifurcation in ZFC and FC. • BCFO shows large bifurcation in ZFC and FC data as the sample is cooled down. • Dielectric loss improves by one order when 50% of cobalt is replaced with Fe. • Well distinguished extrinsic and intrinsic contributions in BCO and BCFO are seen. - Abstract: (Bi{sub 13}Co{sub 12})CoO{sub 40} (BCO) and (Bi{sub 13}Co{sub 5.5}Fe{sub 6.5})CoO{sub 40} (BCFO) nanoparticles are prepared by sol–gel auto combustion method. The X-ray diffraction study (XRD) reveals cubic crystal structure with space group I23. Surface scanning via atomic force microscopy shows the particle size decreases from 100 nm to 75 nm on partially substituting Fe at Co site. At room temperature, BCO is paramagnetic and shows signature of magnetic ordering at 30 K, which seems to be competing paramagnetic and antiferromagnetic behavior. No sign of magnetic disorder is seen, though indication of magnetic frustration is seen. Interestingly, the Fe substituted BCFO shows large magnetic disorder (even at room temperature) with strengthening ferromagnetic ordering as the temperature is lowered. The low temperature dielectric and magnetodielectric measurement shows dominance of extrinsic contributions, through-out the temperature range for BCO. For BCFO, the behavior may be divided under two regions viz., intrinsic (<260 K) and extrinsic (>260 K). Relaxation in both the regions is described by Arrhenius behavior with activation energies 0.25 eV and 0.04 eV in the extrinsic and intrinsic regions respectively. Most interestingly, the dielectric loss decreases by one order for Fe substituted sample. The Haverliak–Negami equation is found to better describe the observed relaxation data.

Magnetic and dielectric studies of Fe substituted sillenite phase bismuth cobaltite nanoparticles

International Nuclear Information System (INIS)

Ray, J.; Biswal, A.K.; Kuila, S.; Vishwakarma, P.N.

2015-01-01

Highlights: • The samples prepared under ambient conditions, crystalizes in sillenite phase. • Ferrimagnetic ordering in BCO occurs at 30 K, with no bifurcation in ZFC and FC. • BCFO shows large bifurcation in ZFC and FC data as the sample is cooled down. • Dielectric loss improves by one order when 50% of cobalt is replaced with Fe. • Well distinguished extrinsic and intrinsic contributions in BCO and BCFO are seen. - Abstract: (Bi 13 Co 12 )CoO 40 (BCO) and (Bi 13 Co 5.5 Fe 6.5 )CoO 40 (BCFO) nanoparticles are prepared by sol–gel auto combustion method. The X-ray diffraction study (XRD) reveals cubic crystal structure with space group I23. Surface scanning via atomic force microscopy shows the particle size decreases from 100 nm to 75 nm on partially substituting Fe at Co site. At room temperature, BCO is paramagnetic and shows signature of magnetic ordering at 30 K, which seems to be competing paramagnetic and antiferromagnetic behavior. No sign of magnetic disorder is seen, though indication of magnetic frustration is seen. Interestingly, the Fe substituted BCFO shows large magnetic disorder (even at room temperature) with strengthening ferromagnetic ordering as the temperature is lowered. The low temperature dielectric and magnetodielectric measurement shows dominance of extrinsic contributions, through-out the temperature range for BCO. For BCFO, the behavior may be divided under two regions viz., intrinsic (<260 K) and extrinsic (>260 K). Relaxation in both the regions is described by Arrhenius behavior with activation energies 0.25 eV and 0.04 eV in the extrinsic and intrinsic regions respectively. Most interestingly, the dielectric loss decreases by one order for Fe substituted sample. The Haverliak–Negami equation is found to better describe the observed relaxation data

From incremental to fundamental substitution in chemical alternatives assessment

DEFF Research Database (Denmark)

Fantke, Peter; Weber, Roland; Scheringer, Martin

2015-01-01

to similarity in chemical structures and, hence, similar hazard profiles between phase-out and substitute chemicals, leading to a rather incremental than fundamental substitution. A hampered phase-out process, the lack of implementing Green Chemistry principles in chemicals design, and lack of Sustainable...... an integrated approach of all stakeholders involved toward more fundamental and function-based substitution by greener and more sustainable alternatives. Our recommendations finally constitute a starting point for identifying further research needs and for improving current alternatives assessment practice....

Nucleophilic Fluorination Reactions in Novel Reaction Media for 18F-Fluorine Labeling Method

International Nuclear Information System (INIS)

Kim, Dong Wook; Jeong, Hwan Jeong; Lim, Seok Tae; Sohn, Myung Hee

2009-01-01

Noninvasive imaging of molecular and biological processes in living subjects with positron emission tomography (PET) provides exciting opportunities to monitor metabolism and detect diseases in humans. Measuring these processes with PET requires the preparation of specific molecular imaging probes labeled with 18F-fluorine. In this review we describe recent methods and novel trends for the introduction of 18 F-fluorine into molecules which in turn are intended to serve as imaging agents for PET study. Nucleophilic 18 F-fluorination of some halo- and mesyloxyalkanes to the corresponding 18 F-fluoroalkanes with 18 F-fluoride obtained from an 18 O(p,n) 18 F reaction, using novel reaction media system such as an ionic liquidor tert-alcohol, has been studied as a new method for 18 F-fluorine labeling. Ionic liquid method is rapid and particularly convenient because 18 F-fluoride in H 2 O can be added directly to the reaction media, obviating the careful drying that is typically required for currently used radiofluorination methods. The nonpolar protic tert-alcohol enhances the nucleophilicity of the fluoride ion dramatically in the absence of any kind of catalyst, greatly increasing the rate of the nucleophilic fluorination and reducing formation of byproducts compared with conventional methods using dipolar aprotic solvents. The great efficacy of this method is a particular advantage in labeling radiopharmaceuticals with 18 F-fluorine for PET imaging, and it is illustrated by the synthesis of 18 F-fluoride radiolabeled molecular imaging probes, such as 18 F-FDG, 18 F-FLT, 18 F-FP-CIT, and 18 F-FMISO, in high yield and purity and in shorter times compared to conventional syntheses

The optimization of 18F-nucleophilic fluorination reaction and its application in synthesis of VMAT2 imaging tracer: [18F]AV-133

International Nuclear Information System (INIS)

Liu Yajing; Zhu Lin; Karl, P.; Qu Wenchao

2010-01-01

Objective: The nucleophilic introduction of n.c.a. [ 18 F]F- into alkanes by nucleophilic reaction is the main method of preparing 18 F-labelled radiopharmaceuticals, and the efficient and rapid reaction is important in 18 F-labelled radiopharmaceuticals. Method: Using 2-(3-substitute propoxy)naphthalene as model compound, the optimal reaction condition was achieved by comparing the different [ 18 F]fluorination condition: 1)different leaving groups (-OTs, -I, -Br and -Cl), 2) different [ 18 F]fluorination catalysts (Kryptofix222/K 2 CO 3 and TBAHCO 3 ), 3) different reaction solvent (ACN, DMSO and DMF), 4) [ 18 F]fluorination temperature (40, 50 and 60 degree C) and 5) reaction time. The radiochemical yields were analyzed by TLC and HPLC. VMAT2 imaging tracer [ 18 F]AV-133 was synthesized under the optimal conditions. Results: From the experiment results, the reation activity was the highest when using -OTs as the leaving group, followed by -I and -Br, -Clunder the [ 18 F]fluorination condition of using K222/K 2 CO 3 as catalyst and ACN as solvent. And also, the radiochemical yield raised as the reaction time and temperature increased. The higher temperature, the shorter time to reach the equilibrium. When changing the solvent from ACN to DMSO, the radiochemical yields were increased. On the contrary, the radiochemical yields were decreasing by using DMF. Comparing the catalyst K222/K 2 CO 3 with TBAHCO 3 , the [ 18 F] fluorination of -OTs gave a higher radiochemical yield in the presence of K222/K 2 CO 3 . So the optimized [ 18 F]fluorination reaction condition was that choosing -OTs as the leaving group, the [ 18 F]fluorination reaction was efficient and gave higher radiochemical yield catalyzed by K222/K 2 CO 3 in DMSO at high temperature. [ 18 F]fluorination of AV-244 was found to provide the VMAT2 imaging tracer [ 18 F]AV-133 in 80 ± 2% radiochemical yield after reaction at 120 degree C for 3 min under optimized conditions. Conclusion: We have described an

Electrochemical and Spin-Trapping Properties of para-substituted α-Phenyl-N-tert-butyl Nitrones

International Nuclear Information System (INIS)

Rosselin, Marie; Tuccio, Béatrice; Pério, Pierre; Villamena, Frederick A.; Fabre, Paul-Louis; Durand, Grégory

2016-01-01

Nitrones are known both as therapeutic antioxidants and efficient spin-traps. In this work, the redox behavior of various para-substituted α-phenyl-N-tert-butyl nitrones (PBN) was studied by cyclic voltammetry. The polar effect of the substituents was found to correlate with the electrochemical properties of the nitronyl function. Compounds bearing an electron-withdrawing group were more easily reduced than those having an electron-donating group and an opposite trend was observed for the oxidation. Ease of oxidation was also computationally rationalized using DFT approach showing increased ease of oxidation with electron donating functionalities. Since electrochemical properties of nitrones are known to correlate with biological properties, this work provides insights in the design of potent nitrone antioxidants. Using cyclic voltammetry the relative rate of superoxide trapping by nitrones was investigated and compared to the classical antioxidant BHT. The determination of the relative rate of phenyl radical trapping was also carried out but showed no clear correlation with the nature of the substituents. This indicates the absence of a polar effect in agreement with previous data and further supports the intermediate nature, that is, non- or weakly nucleophile, of phenyl radical. On the contrary kinetics of hydroxymethyl radical trapping was found to correlate with the nature of the substituents, demonstrating the nucleophilic nature of its addition onto nitrones.

Synthesis and structure of aromatic and heterocyclic tellurium compounds 33. Synthesis of [2-(aryltelluro)vinyl]aldehydes and ketones and stereochemistry of nucleophilic substitution under vinyl atom of carbon

International Nuclear Information System (INIS)

Sadekov, I.D.; Rivkin, B.B.; Zakharov, A.V.; Minkin, V.I.

1996-01-01

By means of interaction of (2-vinylchlorida) carbonyl compounds and (2-acylvinyl) triethylammonium chlorides and arenetellurolate-anions certain, [2-(aryltelluro)vinyl]ketones and [2-(aryltelluro)vinyl]aldehydes have been synthesized, while by means of reaction between 2-aroylvinyl chlorides and Li 2 Te some di(2-aroylvinyl)tellurides have been prepared. Interaction of (2-vinylchloride)ketones with arenetellurolate-anions always gives rise to Z-isomers of [2-(aryltelluro)vinyl]ketones as a result of stabilization of intermediate carbanion by intramolecular coordination O→Te. Nucleophilic addition of arenetellurolate-anions to α-acetylene aldehydes and ketones occurs as trans-addition. 36 refs., 2 figs., 1 tab

Acid dissociation constant and apparent nucleophilicity of lysine-501 of the alpha-polypeptide of sodium and potassium ion activated adenosinetriphosphatase

International Nuclear Information System (INIS)

Xu, K.Y.

1989-01-01

A combination of competitive labeling with [ 3 H]acetic anhydride and immunoaffinity chromatography is described that permits the assignment of the acid dissociation constant and the absolute nucleophilicity of individual lysines in a native enzyme. The acid dissociation constant of lysine-501 of the alpha-polypeptide in native (Na+ + K+)-ATPase was determined. This lysine had a normal pKa of 10.4. The rate constant for the reaction of the free base of lysine-501 with acetic anhydride at 10 degrees C is 400 M-1 s-1. This value is only 30% that for a fully accessible lysine in a protein. The lower than normal apparent nucleophilicity suggests that lysine-501 is hindered from reacting with its intrinsic nucleophilicity by the tertiary structure of the enzyme and is consistent with its location within a pocket that forms the active site upon the surface of the native protein

Barbier Continuous Flow Preparation and Reactions of Carbamoyllithiums for Nucleophilic Amidation.

Science.gov (United States)

Ganiek, Maximilian A; Becker, Matthias R; Berionni, Guillaume; Zipse, Hendrik; Knochel, Paul

2017-08-01

An ambient temperature continuous flow method for nucleophilic amidation and thioamidation is described. Deprotonation of formamides by lithium diisopropylamine (LDA) affords carbamoyllithium intermediates that are quenched in situ with various electrophiles such as ketones, allyl bromides, Weinreb and morpholino amides. The nature of the reactive lithium intermediates and the thermodynamics of the metalation were further investigated by ab initio calculations and kinetic experiments. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Zinc and Carbonate Co-Substituted Nano-Hydroxyapatite

Science.gov (United States)

Girija, E. K.; Kumar, G. Suresh; Thamizhavel, A.

2011-07-01

Synthesis of Zn or CO32- substituted nano-hydroxyapatite (HA) and its physico-chemical properties have been well documented. However, the effects of the simultaneous substitution of Zn and CO32- in nano-HA have not been reported. In the present study, Zn and CO32- substitutions in nano HA independently and concurrently have been done by wet precipitation method and characterized by XRD and FT-IR for its phase purity and chemical homogeneity. Further modulations of the bioactivity and thermal stability of HA due to the substitutions have been studied.

A comparative study on the effect of solvent on nucleophilic fluorination with [18F]fluoride. Protic solvents as co-solvents in SN2 and SNAr reactions

International Nuclear Information System (INIS)

Koivula, T.; Simecek, J.; Jalomaeki, J.; Helariutta, K.; Airaksinen, A.J.

2011-01-01

The effect of solvent on nucleophilic substitution with cyclotron-produced [ 18 F]fluoride was studied in polar aprotic (CH 3 CN and DMF) and protic solvent (t-BuOH and t-amyl alcohol) mixtures (CH 3 CN/co-solvent, 2:8) in a series of model compounds, 4-(R 1 -methyl)benzyl R 2 -benzoates, using a K2.2.2/[ 18 F]KF phase transfer system (R 1 = -Cl, -OMs or -OH; R 2 = -Cl, -I or -NO 2 ). 18 F-fluorination of compounds 1-3, with chloride or mesylate as a leaving group in the benzylic position (R 1 ), afforded the desired 4-([ 18 F]fluoromethyl)benzyl analogues in all solvents during 15 min reaction time. The highest radiochemical yields (RCY) in all the studied reaction temperatures (80, 120 and 160 C) were achieved in CH 3 CN. Radiochemical yields in protic solvents were comparable to RCY in CH 3 CN only with the sulfonate ester 3 as a starting material. 18 F-Fluorination of the benzylic halides 1 and 2 was not promoted in the same extent; in addition, labelled side-products were detected at higher reaction temperatures. Radiofluorination in tert-alcohols was also studied using [ 18 F]CsF with and without added phase transfer catalyst, resulting in both conditions lower RCY when compared to K2.2.2/[ 18 F]KF system. Protic solvents were not able to promote aromatic 18 F-fluorination. 18 F-Fluorination of compound 5, having para-activated nitro group in the aromatic position (R 2 ), failed in tert-alcohols even at the highest temperature, but it was labelled successfully in DMF and to some extent in CH 3 CN. (orig.)

Organic Chemistry Students' Ideas about Nucleophiles and Electrophiles: The Role of Charges and Mechanisms

Science.gov (United States)

Anzovino, Mary E.; Bretz, Stacey Lowery

2015-01-01

Organic chemistry students struggle with reaction mechanisms and the electron-pushing formalism (EPF) used by practicing organic chemists. Faculty have identified an understanding of nucleophiles and electrophiles as one conceptual prerequisite to mastery of the EPF, but little is known about organic chemistry students' knowledge of nucleophiles…

Effect of Pb and Cr Substitutions on Phase Formation and Excess Conductivity of Bi-2212 Superconductor

International Nuclear Information System (INIS)

Khir, F. L. M.; Mohamed, Z.; Yusuf, A. A.; Yusof, M. I. M.; Yahya, A. K.

2010-01-01

The influence of Pb and Cr substitutions on the superconducting properties of Bi 2 Sr 2 CaCu 2 O 8 (Bi-2212) superconductors is reported. The samples were prepared from Bi 2-x Pb x Sr 2 Ca 2-y Cr y Cu 3 O 10-δ (x = 0-0.3, y = 0-0.3) starting composition by the solid-state-reaction method. XRD analysis showed formation of pure Bi-2212 for (x = 0, y = 0), (x = 0.3, y = 0.2,) and (x = 0.3, y = 0.2,) starting compositions. Excess conductivity analysis based on Asmalazov-Larkin theory on single-phased Bi2212 samples showed 2D to 3D transition in superconducting fluctuation behavior (SFB) for all the samples. Highest 2D-3D transition temperature, T 2D-3D was observed at Pb and Cr substitutions of x = 0.3, and x = 0.2, respectively.

Electrophilic properties of patulin. Adduct structures and reaction pathways with 4-bromothiophenol and other model nucleophiles.

Science.gov (United States)

Fliege, R; Metzler, M

2000-05-01

The mycotoxin patulin (PAT) is believed to exert its cytotoxic and chromosome-damaging effects by forming covalent adducts with essential cellular thiols. Since the chemical structures of such adducts are unknown to date, we have studied the reaction of PAT and its O-acetylated derivative with the monofunctional thiol model compound 4-bromothiophenol (BTP), which was chosen due to analytical advantages. By means of analytical and preparative high-performance liquid chromatography, 16 adducts of PAT and 3 adducts of acetyl-PAT were isolated and their chemical structures elucidated by (1)H and (13)C NMR, IR, and UV spectroscopy. Time course studies and analysis of daughter product formation from isolated intermediate adducts led to a detailed scheme for the reaction of PAT with BTP. The structures of adducts of PAT formed with other model nucleophiles, e. g., the aliphatic thiol 2-mercaptoethanol and the aromatic amine 4-bromoaniline, were also elucidated and found to corroborate the reaction scheme. In addition, one further reaction pathway was observed with 2-mercaptoethanol, which appears to be independent from those found for BTP. Our study with model nucleophiles provides insights into the electrophilic reactivity of PAT and proved to be useful for the structure elucidation of PAT adducts with biological nucleophiles of toxicological relevance, as will be reported by Fliege and Metzler [(2000) Chem. Res. Toxicol. 13, 373-381].

Nucleophilic reactions of hydrazido(2-) complexes of molybdenum and tungsten with succinyl dichloride and phenyl isocyanate

International Nuclear Information System (INIS)

Iwanami, Kiyotaka; Mizobe, Yasushi; Takahashi, Tamotsu; Kodama, Teruyuki; Uchida, Yasuzo

1981-01-01

Nucleophilic attack of the WNNH 2 group in the hydrazido(2-) complex [WF(NNH 2 )(dpe) 2 ][BF 4 ] (dpe = Ph 2 PCH 2 CH 2 PPh 2 ) on succinyl dichloride gives a novel ethanedioylhydrazido(2-) complex, [WF(NNCOCH 2 CH 2 CO)(dpe) 2 ][BF 4 ]. X-Ray structural analysis shows that the carbon, nitrogen, and oxygen atoms of the ethanedioylhydrazido(2-) ligand lie nearly in the same plane, indicating sp 2 character of the nitrogen atom bearing the two carbonyl groups. Phenyl isocyanate also undergoes nucleophilic attack by the hydrazido(2-) complex [MBr(NNH 2 )(dpe) 2 ]Br (M = Mo or W) to yield the phenylsemicarbazido(2-) type complex, [MBr(NNHCONHPh)(dpe) 2 ]Br. Treatment of the semicarbazido(2-) complex with triethylamine gives a new diazenido complex [MBr(NNCONHPh)(dpe) 2 ]. (author)

Abstraction of methyl from neutral Fischer-type carbene complexes: A new site for nucleophilic attack

Energy Technology Data Exchange (ETDEWEB)

Toomey, L.M.; Atwood, J.D. [State Univ. of New York, Buffalo, NY (United States)

1997-02-04

Reactions of Fischer-type carbene complexes, M(CO){sub 5}(C(OMe)pH) (M = Cr, W), with metal carbonyl anions (M`{sup -} = CpFe(CO){sub 2}{sup -@}, Re(CO){sub 5}{sup -}, Mn(CO){sub 4}PPh{sub 3}{sup -}, Co(CO){sub 3}PPh{sub 3}{sup -}, Cp{sup *}Cr(CO){sub 3}{sup -}, CpMo(CO){sub 3}{sup -}) result in demethylation of the carbene complexes. The products are M(CO){sub 5}C(O)Ph{sup -} and M`-Me, characterized by infrared and NMR spectroscopy. A slower rate for reaction with W(CO){sub 5}(C(OEt)Ph) in comparison to the methyl analogue is consistent with nucleophilic attack of the metal carbonyl anion on the methyl of the methoxy group of the carbene. This is a new type of nucleophilic attack of a Fischer-type carbene. 22 refs., 1 fig., 1 tab.

Industrialization in Sub-Saharan Africa and import substitution policy

Directory of Open Access Journals (Sweden)

Ana Paula F. Mendes

2014-03-01

Full Text Available This article aims to contribute to the understanding of the process of import substitution in Sub-Saharan Africa. The process of industrialization in Sub-Saharan Africa occurred in two phases: a first step, even very early during the colonial regime began around the 1920s and ended in the late forties; a second phase of industrialization began in the late fifties and gained momentum in the sixties, when import substitution was implemented more widely. Although these countries were the last to embark on the strategy of import substitution, they followed the same steps of Latin American countries, and as the structural domestic and external constraints were too strong, the failure of the policy of import substitution arrived early and the negative impact on these economies had a greater magnitude.

Substitution determination of Fmoc‐substituted resins at different wavelengths

Science.gov (United States)

Kley, Markus; Bächle, Dirk; Loidl, Günther; Meier, Thomas; Samson, Daniel

2017-01-01

In solid‐phase peptide synthesis, the nominal batch size is calculated using the starting resin substitution and the mass of the starting resin. The starting resin substitution constitutes the basis for the calculation of a whole set of important process parameters, such as the number of amino acid derivative equivalents. For Fmoc‐substituted resins, substitution determination is often performed by suspending the Fmoc‐protected starting resin in 20% (v/v) piperidine in DMF to generate the dibenzofulvene–piperidine adduct that is quantified by ultraviolet–visible spectroscopy. The spectrometric measurement is performed at the maximum absorption wavelength of the dibenzofulvene–piperidine adduct, that is, at 301.0 nm. The recorded absorption value, the resin weight and the volume are entered into an equation derived from Lambert–Beer's law, together with the substance‐specific molar absorption coefficient at 301.0 nm, in order to calculate the nominal substitution. To our knowledge, molar absorption coefficients between 7100 l mol−1 cm−1 and 8100 l mol−1 cm−1 have been reported for the dibenzofulvene–piperidine adduct at 301.0 nm. Depending on the applied value, the nominal batch size may differ up to 14%. In this publication, a determination of the molar absorption coefficients at 301.0 and 289.8 nm is reported. Furthermore, proof is given that by measuring the absorption at 289.8 nm the impact of wavelength accuracy is reduced. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd. PMID:28635051

Effect of Microwave Irradiation on the Condensation of 6-Substituted 3-Formylchromones with Some Five-membered Heterocyclic Compounds

Directory of Open Access Journals (Sweden)

Nada Pronayova

2000-02-01

Full Text Available Different types of 3-substituted 4H-4-oxobenzopyrans were prepared by microwave irradiation as well as by a classical method. The beneficial effect of microwave irradiation on the aldol condensation of 3-formylchromones with 2-imino-1-methylimidazolidine-4-one (creatinine, 2-thioxoimidazolidine-4-one (thiohydantoin and 2-ethyl-2-thioxothiazolidin-4-one (3-ethylrhodanine in different reaction media is described. Our results show that the effect of microwave irradiation on the reactions studied was a shortening of the reaction times and a smooth increase in the yields. The subsequent reactions of the product with some nucleophiles are discussed. The structure of the products was proven by elemental analysis, IR and NMR spectra.

Synthesis and application of aryl-ferrocenyl(pseudo-biarylic) complexes. Part 5. Design and synthesis of a new type of ferrocene-based planar chiral DMAP analogues. A new catalyst system for asymmetric nucleophilic catalysis

DEFF Research Database (Denmark)

Seitzberg, J.G; Dissing, C; Søtofte, Inger

2005-01-01

A new first-generation catalyst system for nucleophilic catalysis has been developed. It is based on a planar chiral ferrocene skeleton with either the potent nucleophile 4-(dimethylamino)pyridine (DMAP) or the related 4-nitropyridine N-oxide attached in either the 2- or the 3-position. The synth......A new first-generation catalyst system for nucleophilic catalysis has been developed. It is based on a planar chiral ferrocene skeleton with either the potent nucleophile 4-(dimethylamino)pyridine (DMAP) or the related 4-nitropyridine N-oxide attached in either the 2- or the 3-position...

A General Ligand Design for Gold Catalysis allowing Ligand-Directed Anti Nucleophilic Attack of Alkynes

Science.gov (United States)

Wang, Yanzhao; Wang, Zhixun; Li, Yuxue; Wu, Gongde; Cao, Zheng; Zhang, Liming

2014-01-01

Most homogenous gold catalyses demand ≥0.5 mol % catalyst loading. Due to the high cost of gold, these reactions are unlikely to be applicable in medium or large scale applications. Here we disclose a novel ligand design based on the privileged biphenyl-2-phosphine framework that offers a potentially general approach to dramatically lowering catalyst loading. In this design, an amide group at the 3’ position of the ligand framework directs and promotes nucleophilic attack at the ligand gold complex-activated alkyne, which is unprecedented in homogeneous gold catalysis considering the spatial challenge of using ligand to reach antiapproaching nucleophile in a linear P-Au-alkyne centroid structure. With such a ligand, the gold(I) complex becomes highly efficient in catalyzing acid addition to alkynes, with a turnover number up to 99,000. Density functional theory calculations support the role of the amide moiety in directing the attack of carboxylic acid via hydrogen bonding. PMID:24704803

Probing the reactivation process of sarin-inhibited acetylcholinesterase with α-nucleophiles: hydroxylamine anion is predicted to be a better antidote with DFT calculations.

Science.gov (United States)

Khan, Md Abdul Shafeeuulla; Lo, Rabindranath; Bandyopadhyay, Tusar; Ganguly, Bishwajit

2011-08-01

Inactivation of acetylcholinesterase (AChE) due to inhibition by organophosphorus (OP) compounds is a major threat to human since AChE is a key enzyme in neurotransmission process. Oximes are used as potential reactivators of OP-inhibited AChE due to their α-effect nucleophilic reactivity. In search of more effective reactivating agents, model studies have shown that α-effect is not so important for dephosphylation reactions. We report the importance of α-effect of nucleophilic reactivity towards the reactivation of OP-inhibited AChE with hydroxylamine anion. We have demonstrated with DFT [B3LYP/6-311G(d,p)] calculations that the reactivation process of sarin-serine adduct 2 with hydroxylamine anion is more efficient than the other nucleophiles reported. The superiority of hydroxylamine anion to reactivate the sarin-inhibited AChE with sarin-serine adducts 3 and 4 compared to formoximate anion was observed in the presence and absence of hydrogen bonding interactions of Gly121 and Gly122. The calculated results show that the rates of reactivation process of adduct 4 with hydroxylamine anion are 261 and 223 times faster than the formoximate anion in the absence and presence of such hydrogen bonding interactions. The DFT calculated results shed light on the importance of the adjacent carbonyl group of Glu202 for the reactivation of sarin-serine adduct, in particular with formoximate anion. The reverse reactivation reaction between hydroxylamine anion and sarin-serine adduct was found to be higher in energy compared to the other nucleophiles, which suggests that this α-nucleophile can be a good antidote agent for the reactivation process. Copyright © 2011 Elsevier Inc. All rights reserved.

Substitution determination of Fmoc-substituted resins at different wavelengths.

Science.gov (United States)

Eissler, Stefan; Kley, Markus; Bächle, Dirk; Loidl, Günther; Meier, Thomas; Samson, Daniel

2017-10-01

In solid-phase peptide synthesis, the nominal batch size is calculated using the starting resin substitution and the mass of the starting resin. The starting resin substitution constitutes the basis for the calculation of a whole set of important process parameters, such as the number of amino acid derivative equivalents. For Fmoc-substituted resins, substitution determination is often performed by suspending the Fmoc-protected starting resin in 20% (v/v) piperidine in DMF to generate the dibenzofulvene-piperidine adduct that is quantified by ultraviolet-visible spectroscopy. The spectrometric measurement is performed at the maximum absorption wavelength of the dibenzofulvene-piperidine adduct, that is, at 301.0 nm. The recorded absorption value, the resin weight and the volume are entered into an equation derived from Lambert-Beer's law, together with the substance-specific molar absorption coefficient at 301.0 nm, in order to calculate the nominal substitution. To our knowledge, molar absorption coefficients between 7100 l mol -1  cm -1 and 8100 l mol -1  cm -1 have been reported for the dibenzofulvene-piperidine adduct at 301.0 nm. Depending on the applied value, the nominal batch size may differ up to 14%. In this publication, a determination of the molar absorption coefficients at 301.0 and 289.8 nm is reported. Furthermore, proof is given that by measuring the absorption at 289.8 nm the impact of wavelength accuracy is reduced. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd. © 2017 The Authors Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.

Additional Nucleophile-Free FeCl3-Catalyzed Green Deprotection of 2,4-Dimethoxyphenylmethyl-Protected Alcohols and Carboxylic Acids.

Science.gov (United States)

Sawama, Yoshinari; Masuda, Masahiro; Honda, Akie; Yokoyama, Hiroki; Park, Kwihwan; Yasukawa, Naoki; Monguchi, Yasunari; Sajiki, Hironao

2016-01-01

The deprotection of the methoxyphenylmethyl (MPM) ether and ester derivatives can be generally achieved by the combinatorial use of a catalytic Lewis acid and stoichiometric nucleophile. The deprotections of 2,4-dimethoxyphenylmethyl (DMPM)-protected alcohols and carboxylic acids were found to be effectively catalyzed by iron(III) chloride without any additional nucleophile to form the deprotected mother alcohols and carboxylic acids in excellent yields. Since the present deprotection proceeds via the self-assembling mechanism of the 2,4-DMPM protective group itself to give the hardly-soluble resorcinarene derivative as a precipitate, the rigorous purification process by silica-gel column chromatography was unnecessary and the sufficiently-pure alcohols and carboxylic acids were easily obtained in satisfactory yields after simple filtration.

Reactivity and selectivity of the electrophile aromatic substitution in the gas phase by positive 80Br and 125I decay ions

International Nuclear Information System (INIS)

Knust, E.J.

1975-02-01

The nuclear isomeric transition sup(80m)Br(IT) 80 Br or the electron capture decay 125 Xe(EC) 125 I in the presence of high concentrations of a noble gas such as Ar or Xe are suitable for the study of the electrophilic substitution of bromium or iodonium ions in the gas phase. By using this nuclear method, which, unlike physical methods, also allows the determination of the isomer distribution, the electrophilic aromatic bromation and iodation of mono-substituted benzene compounds through unsolvated positive bromine or iodine ions could be investigated for the first time using radio-gas chromatographic techniques. (orig./LH) [de

Antimony substitution in SmFeAsO

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Daniel; Braun, Hans F. [Universitaet Bayreuth (Germany)

2015-07-01

In the iron based compounds structural and magnetic phase transitions can be suppressed by applying external hydrostatic pressure and superconductivity emerges. Beside hydrostatic pressure, it is possible to apply chemical pressure by the substitution of atoms in the compounds with smaller ones. Such a substitution was successful for example in LaFeAs{sub 1-x}P{sub x}O, where the parent compound shows a structural and a spin-density-wave transition and the P doped samples become superconducting. We are interested in the opposite way and substitute the As by the bigger Sb. In literature, the substitution in the La-1111 compounds was possible up to a substitution level of 40 %. With Sm, instead of La, we used a smaller rare-earth metal. We present the results obtained on polycrystalline samples characterized by Xray powder diffraction and resistivity measurements.

Homoaromatics as intermediates in the substitution reactions of 1,2,4,5-tetrazines with ammonia and hydrazine

International Nuclear Information System (INIS)

Counotte-Potman, A.D.

1981-01-01

This thesis describes some nucleophilic substitution reactions between the red 1,2,4,5-tetrazines and hydrazine-hydrate or ammonia. Special attention was paid to the occurrence of the Ssub(N) (ANRORC) mechanism in these substitution reactions. This mechanism comprises a sequence of reactions, involving the Addition of a Nucleopile to a heteroaromatic species, followed by a Ring-Opening and Ring Closure reaction to the substitution product. 3-Alkyl(aryl)-1,2,4,5-tetrazines were found to undergo a Chichibabin hydrazination into 6-hydrazino-3-alkyl(aryl)-1,2,4,5-tetrazines on treatment with hydrazine-hydrate. The first step in this reaction sequence was the formation of a homoaromatic sigma-adduct. Subsequently an open-chain intermediate was observed by NMR, on raising the temperature. Finally the hydrazino compound is formed by ring closure. This reaction sequence can be considered as an Ssub(N)(ANRORC) process. With 15 N-labelled hydrazine, only part of the label was found to be built in the 1,2,4,5-tetrazine ring of the 6-hydrazino compounds. This is the first example of a reaction in which both the hydrazino compound with the 15 N-label in the ring and with the 15 N-label in the exocyclic hydrazino group are formed according to the Ssub(N)(ANRORC) mechanism. (Auth.)

Fine-tuning the nucleophilic reactivities of boron ate complexes derived from aryl and heteroaryl boronic esters.

Science.gov (United States)

Berionni, Guillaume; Leonov, Artem I; Mayer, Peter; Ofial, Armin R; Mayr, Herbert

2015-02-23

Boron ate complexes derived from thienyl and furyl boronic esters and aryllithium compounds have been isolated and characterized by X-ray crystallography. Products and mechanisms of their reactions with carbenium and iminium ions have been analyzed. Kinetics of these reactions were monitored by UV/Vis spectroscopy, and the influence of the aryl substituents, the diol ligands (pinacol, ethylene glycol, neopentyl glycol, catechol), and the counterions on the nucleophilic reactivity of the boron ate complexes were examined. A Hammett correlation confirmed the polar nature of their reactions with benzhydrylium ions, and the correlation lg k(20 °C)=sN (E+N) was employed to determine the nucleophilicities of the boron ate complexes and to compare them with those of other borates and boronates. The neopentyl and ethylene glycol derivatives were found to be 10(4) times more reactive than the pinacol and catechol derivatives. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tyrosyl-DNA Phosphodiesterase I Catalytic Mutants Reveal an Alternative Nucleophile That Can Catalyze Substrate Cleavage*

Science.gov (United States)

Comeaux, Evan Q.; Cuya, Selma M.; Kojima, Kyoko; Jafari, Nauzanene; Wanzeck, Keith C.; Mobley, James A.; Bjornsti, Mary-Ann; van Waardenburg, Robert C. A. M.

2015-01-01

Tyrosyl-DNA phosphodiesterase I (Tdp1) catalyzes the repair of 3′-DNA adducts, such as the 3′-phosphotyrosyl linkage of DNA topoisomerase I to DNA. Tdp1 contains two conserved catalytic histidines: a nucleophilic His (Hisnuc) that attacks DNA adducts to form a covalent 3′-phosphohistidyl intermediate and a general acid/base His (Hisgab), which resolves the Tdp1-DNA linkage. A Hisnuc to Ala mutant protein is reportedly inactive, whereas the autosomal recessive neurodegenerative disease SCAN1 has been attributed to the enhanced stability of the Tdp1-DNA intermediate induced by mutation of Hisgab to Arg. However, here we report that expression of the yeast HisnucAla (H182A) mutant actually induced topoisomerase I-dependent cytotoxicity and further enhanced the cytotoxicity of Tdp1 Hisgab mutants, including H432N and the SCAN1-related H432R. Moreover, the HisnucAla mutant was catalytically active in vitro, albeit at levels 85-fold less than that observed with wild type Tdp1. In contrast, the HisnucPhe mutant was catalytically inactive and suppressed Hisgab mutant-induced toxicity. These data suggest that the activity of another nucleophile when Hisnuc is replaced with residues containing a small side chain (Ala, Asn, and Gln), but not with a bulky side chain. Indeed, genetic, biochemical, and mass spectrometry analyses show that a highly conserved His, immediately N-terminal to Hisnuc, can act as a nucleophile to catalyze the formation of a covalent Tdp1-DNA intermediate. These findings suggest that the flexibility of Tdp1 active site residues may impair the resolution of mutant Tdp1 covalent phosphohistidyl intermediates and provide the rationale for developing chemotherapeutics that stabilize the covalent Tdp1-DNA intermediate. PMID:25609251

Kinetic study on alkaline hydrolysis of Y-substituted phenyl X-substituted benzenesulfonates: Effects of changing nucleophile from azide to hydroxide ion on reactivity and transition-state structure

International Nuclear Information System (INIS)

Moon, Ji Hyun; Kim, Min Young; Han, So Yeop; Um, Ik Hwan

2015-01-01

Second-order rate constants (math formula) for alkaline hydrolysis of 2,4-dinitrophenyl X-substituted benzenesulfonates (1a–1f) and Y-substituted phenyl 4-nitrobezenesulfonates (2a–2g) have been measured spectrophotometrically. Comparison of math formula with the math formula values reported previously for the corresponding reactions with math formula has revealed that OH [BOND] is only 10"3-fold more reactive than math formula, although the former is 11 pK _a units more basic than the latter. The Yukawa–Tsuno plot for the reactions of 1a–1f results in an excellent linear correlation with ρ_X = 2.09 and r = 0.41. The Brønsted-type plot for the reactions of 2a–2g is linear with β_l_g = −0.51, which is typical for reactions reported to proceed through a concerted mechanism. The Yukawa–Tsuno plot for the reactions of 2a–2g exhibits excellent linearity with ρ_Y = 1.85 and r = 0.25, indicating that a partial negative charge develops on the O atom of the leaving group in the transition state. Thus, the alkaline hydrolysis of 1a–1f and 2a–2g has been concluded to proceed through a concerted mechanism. Comparison of the ρ_X and β_l_g values for the reactions with math formula ions suggests that the reactions with hydroxide ion proceed through a tighter transition-state structure than those with azide ion

40 CFR 721.981 - Substituted naphtholoazo-substituted naphthalenyl-substituted azonaphthol chromium complex.

Science.gov (United States)

2010-07-01

... naphthalenyl-substituted azonaphthol chromium complex. 721.981 Section 721.981 Protection of Environment...-substituted naphthalenyl-substituted azonaphthol chromium complex. (a) Chemical substance and significant new... naphtholoazo-substituted naphthalenyl-substituted azonaphthol chromium complex (PMN P-93-1631) is subject to...

Antioxidant activity of selenenamide-based mimic as a function of the aromatic thiols nucleophilicity, a DFT-SAPE model.

Science.gov (United States)

Kheirabadi, Ramesh; Izadyar, Mohammad

2018-05-18

The mechanism of action of the selenenamide 1 as a mimic of the glutathione peroxidase (GPx) was investigated by the density functional theory. The solvent-assisted proton exchange procedure was applied to model the catalytic behavior and antioxidant activity of this mimic. To have an insight into the charge transfer effect, different aromatic thiols, including electron donating substituents on the phenyl ring were considered. The catalytic behavior of the selenenamide was modeled in a four-step mechanism, described by the oxidation of the mimic, the reduction of the obtained product, selenoxide, the reduction of the selenenylsulfide and dehydration of selenenic acid. On the basis of the activation parameters, the final step of the proposed mechanism is the rate determining states of the catalytic cycle. Turnover frequency (TOF) analysis showed that the electron donating groups at the para-position of the phenyl ring of the PhSH do not affect the catalytic activity of the selenenamide in contrast to p-methyl thiophenol which indicates the highest nucleophilicity. The evaluation of the electronic contribution of the various donating groups on the phenyl ring of the aromatic thiols shows that the antioxidant activity of the selenenamide sufficiently increases in the presence of the electron-donating substitutions. Finally, the charge transfer process at the rate-determining state was investigated based on the natural bond orbital analysis. Copyright © 2018 Elsevier Ltd. All rights reserved.

Nucleophilic 18F-Labeling of Spirocyclic Iodonium Ylide or Boronic Pinacol Ester Precursors - Advantages and Disadvantages

DEFF Research Database (Denmark)

Petersen, Ida Nymann; Kristensen, Jesper Langgaard; Herth, Matthias Manfred

2017-01-01

The field of labeling electron-rich aryl compounds with nucleophilic [18F]fluoride has recently expanded with radiofluorination strategies that apply boronic esters or spirocyclic iodonium ylides as precursors. Herein, we present a direct comparison of these strategies by using nine chemically di...

Normal-phase liquid chromatography retention behavior of polycyclic aromatic hydrocarbon and their methyl-substituted derivatives on an aminopropyl stationary phase.

Science.gov (United States)

Wilson, Walter B; Hayes, Hugh V; Sander, Lane C; Campiglia, Andres D; Wise, Stephen A

2017-09-01

Retention indices for 124 polycyclic aromatic hydrocarbons (PAHs) and 62 methyl-substituted (Me-) PAHs were determined using normal-phase liquid chromatography (NPLC) on a aminopropyl (NH 2 ) stationary phase. PAH retention behavior on the NH 2 phase is correlated to the total number of aromatic carbons in the PAH structure. Within an isomer group, non-planar isomers generally elute earlier than planar isomers. MePAHs generally elute slightly later but in the same region as the parent PAHs. Correlations between PAH retention behavior on the NH 2 phase and PAH thickness (T) values were investigated to determine the influence of non-planarity for isomeric PAHs with four to seven aromatic rings. Correlation coefficients ranged from r = 0.19 (five-ring peri-condensed molecular mass (MM) 252 Da) to r = -0.99 (five-ring cata-condensed MM 278 Da). In the case of the smaller PAHs (MM ≤ 252 Da), most of the PAHs had a planar structure and provided a low correlation. In the case of larger PAHs (MM ≥ 278 Da), nonplanarity had a significant influence on the retention behavior and good correlation between retention and T was obtained for the MM 278 Da, MM 302 Da, MM 328 Da, and MM 378 Da isomer sets. Graphical abstract NPLC separation of the three-, four-, five-, and six-ring PAH isomers with different number of aromatic carbon atoms and degrees of non-planarity (Thickness, T). The inserted figure plots the number of aromatic carbon atoms vs. the log I value for the 124 parent PAHs.

Normal-phase liquid chromatography retention behavior of polycyclic aromatic sulfur heterocycles and alkyl-substituted polycyclic aromatic sulfur heterocycle isomers on an aminopropyl stationary phase.

Science.gov (United States)

Wilson, Walter B; Hayes, Hugh V; Sander, Lane C; Campiglia, Andres D; Wise, Stephen A

2018-02-01

Retention indices for 67 polycyclic aromatic sulfur heterocycles (PASHs) and 80 alkyl-substituted PASHs were determined using normal-phase liquid chromatography (NPLC) on an aminopropyl (NH 2 ) stationary phase. The retention behavior of PASH on the NH 2 phase is correlated with the number of aromatic carbon atoms and two structural characteristics have a significant influence on their retention: non-planarity (thickness, T) and the position of the sulfur atom in the bay-region of the structure. Correlations between solute retention on the NH 2 phase and T of PASHs were investigated for three cata-condensed (cata-) PASH isomer groups: (a) 13 four-ring molecular mass (MM) 234 Da cata-PASHs, (b) 20 five-ring MM 284 Da cata-PASHs, and (c) 12 six-ring MM 334 Da cata-PASHs. Correlation coefficients ranged from r = -0.49 (MM 234 Da) to r = -0.65 (MM 334 Da), which were significantly lower than structurally similar PAH isomer groups (r = -0.70 to r = -0.99). The NPLC retention behavior of the PASHs are compared to similar results for PAHs.

A convenient procedure for the solid-phase synthesis of hydroxamic acids on PEGA resins

DEFF Research Database (Denmark)

Nandurkar, Nitin Subhash; Petersen, Rico; Qvortrup, Katrine

2011-01-01

An efficient method for the solid-phase synthesis of hydroxamic acids is described. The method comprises the nucleophilic displacement of esters immobilized on PEGA resins with hydroxylamine/sodium hydroxide in isopropanol. The hydroxyaminolysis protocol is compatible with a broad range of PEGA...

Origin of Enhanced Reactivity of a Microsolvated Nucleophile in Ion Pair SN2 Reactions: The Cases of Sodium p-Nitrophenoxide with Halomethanes in Acetone.

Science.gov (United States)

Li, Qiang-Gen; Xu, Ke; Ren, Yi

2015-04-30

In a kinetic experiment on the SN2 reaction of sodium p-nitrophenoxide with iodomethane in acetone-water mixed solvent, Humeres et al. (J. Org. Chem. 2001, 66, 1163) found that the reaction depends strongly on the medium, and the fastest rate constant was observed in pure acetone. The present work tries to explore why acetone can enhance the reactivity of the title reactions. Accordingly, we make a mechanistic study on the reactions of sodium p-nitrophenoxide with halomethanes (CH3X, X = Cl, Br, I) in acetone by using a supramolecular/continuum model at the PCM-MP2/6-311+G(d,p)//B3LYP/6-311+G(d,p) level, in which the ion pair nucleophile is microsolvated by one to three acetone molecules. We compared the reactivity of the microsolvated ion pair nucleophiles with solvent-free ion pair and anionic ones. Our results clearly reveal that the microsolvated ion pair nucleophile is favorable for the SN2 reactions; meanwhile, the origin of the enhanced reactivity induced by microsolvation of the nucleophile is discussed in terms of the geometries of transition state (TS) structures and activation strain model, suggesting that lower deformation energies and stronger interaction energies between the deformed reactants in the TS lead to the lower overall reaction barriers for the SN2 reaction of microsolvated sodium p-nitrophenoxide toward halomethanes in acetone.

B-site substituted solid solutions on the base of sodium-bismuth titanate

Directory of Open Access Journals (Sweden)

V. M. Ishchuk

2016-12-01

Full Text Available The paper presents results of studies of the formation of phases during the solid-state synthesis in the [(Na0.5Bi0.50.80Ba0.20](Ti1–yByO3 system of solid solutions with B-site substitutions. The substitutions by zirconium, tin and ion complexes (In0.5Nb0.5 and (Fe0.5Nb0.5 have been studied. It has been found that the synthesis is a multi-step process associated with the formation of a number of intermediate phases (depending on the compositions and calcination temperatures. Single-phase solid solutions have been produced at the calcination temperatures in the interval 1000–1100∘C. An increase in the substituting ions concentration leads to a linear increase of the crystal cell size. At the same time, the tolerance factor gets reduced boosting the stability of the antiferroelectric phase as compared to that of the ferroelectric phase.

Chemistry of [(Perfluoroalkyl)Methyl] Oxiranes. Regioselectivity of Ring Opening with O-Nucleophiles and the Preparation of Amphiphilic Monomers

Czech Academy of Sciences Publication Activity Database

Církva, Vladimír; Améduri, B.; Boutevin, B.; Paleta, O.

1997-01-01

Roč. 84, č. 1 (1997), s. 53-61 ISSN 0022-1139 Institutional research plan: CEZ:AV0Z4072921 Keywords : fluoroalkyl thiiranes * nucleophilic oxirane ring opening Subject RIV: CC - Organic Chemistry Impact factor: 0.714, year: 1997

Correlation between ionic size and valence state of tetra, penta and hexavalent B-site substitution with solubility limit, phase transformation and multiferroic properties of Bi0.875Eu0.125FeO3

Science.gov (United States)

Mumtaz, Fiza; Jaffari, G. Hassnain; Hassan, Qadeer ul; Shah, S. Ismat

2018-06-01

We present detailed comparative study of effect of isovalent i.e. Eu+3 substitution at A-site and tetra (Ti+4, Zr+4), penta (V+5) and hexavalent (W+6) substitutions at B-site in BiFeO3. Eu+3 substitution led to phase transformation and exhibited mixed phases i.e. rhombohedral and orthorhombic, while tetravalent substituents (Ti+4 and Zr+4) led to stabilization of cubic phase. In higher valent (i.e. V+5 and W+6) cases solubility limit was significantly reduced where orthorhombic phase was observed as in the case of parent compound. Phase transformation as a consequence of increase in microstrain and chemical pressure induced by the substituent has been discussed. Solubility limit of different B-site dopants i.e. Zr, W and V was extracted to 5%, 2% and 2%, respectively. Extra phases in various cases were Bi2Fe4O9, Bi25FeO40, Bi14W2O27, and Bi23V4O44.5 and their fractional amount have been quantified. Ti was substituted up to 15% and has been observed to be completely soluble in the parent compound. Solubility limits depends on ionic radii mismatch and valance difference of Fe+3 and dopant, in which valance difference plays more dominant role. Solubility limit and phase transformation has been explained in terms of change in bond strength and tolerance factor induced by incorporation of dopant which depend on its size and valence state. Detail optical, dielectric, ferroelectric, magnetic and transport properties of Eu and Ti co-doped samples and selected low concentration B-site doped compositions (i.e. 2%) have presented and discussed. Two d-d transitions and three charge transfer transitions were observed within UV-VIS range. Both change in cell volume for the same phase and transformation in crystal structure affects the band gap. Increase in room temperature dielectric constant and saturation polarization was also found to increase in case of Eu-Ti co-doped samples with increasing concentration of Ti. Substitution of Eu at A-site and Ti at B-site led to

4-alkyl-L-(Dehydro)proline biosynthesis in actinobacteria involves N-terminal nucleophile-hydrolase activity of γ-glutamyltranspeptidase homolog for C-C bond cleavage

Science.gov (United States)

Zhong, Guannan; Zhao, Qunfei; Zhang, Qinglin; Liu, Wen

2017-07-01

γ-Glutamyltranspeptidases (γ-GTs), ubiquitous in glutathione metabolism for γ-glutamyl transfer/hydrolysis, are N-terminal nucleophile (Ntn)-hydrolase fold proteins that share an autoproteolytic process for self-activation. γ-GT homologues are widely present in Gram-positive actinobacteria where their Ntn-hydrolase activities, however, are not involved in glutathione metabolism. Herein, we demonstrate that the formation of 4-Alkyl-L-(dehydro)proline (ALDP) residues, the non-proteinogenic α-amino acids that serve as vital components of many bioactive metabolites found in actinobacteria, involves unprecedented Ntn-hydrolase activity of γ-GT homologue for C-C bond cleavage. The related enzymes share a key Thr residue, which acts as an internal nucleophile for protein hydrolysis and then as a newly released N-terminal nucleophile for carboxylate side-chain processing likely through the generation of an oxalyl-Thr enzyme intermediate. These findings provide mechanistic insights into the biosynthesis of various ALDP residues/associated natural products, highlight the versatile functions of Ntn-hydrolase fold proteins, and particularly generate interest in thus far less-appreciated γ-GT homologues in actinobacteria.

Novel non-symmetrical bifunctionally-substituted phthalonitriles and corresponding d-metal phthalocyaninates

Science.gov (United States)

Vashurin, Artur; Maizlish, Vladimir; Tikhomirova, Tatiyana; Nemtseva, Marina; Znoyko, Serafima; Aleksandriiskii, Viktor

2018-05-01

The work reports synthesis of 4-(2-tert-butyl-4,5-dicyanophenylsulfonyl)benzene and its analogue containing carboxyl group in phenyl fragment by nucleophilic substitution of nitro-group of 4-tert-butyl-5-nitrophthalonitrile. Unique structure of the obtained compounds is explained by presence of bulky tert-butyl substituent in combination with carboxyl group, which being part of phthalocyanine molecule impart it higher solubility within different solvents (organic and water mediums) and act as anchoring groups. Based on obtained nitriles phthalocyanine complexes of copper, nickel, cobalt and magnesium are synthesized with good yields. Demetallization of initial magnesium phthalocyanine by hydrochloric acid was performed in order to obtain ligand of phthalocyanine. Synthetic and purification techniques are described in detail. Obtained substances are of specific structure making them to be applied in sensorics for smart materials production, as sensitizers or part of molecular magnets. The structure, NMR and IR spectra are modeled using special software. Resulting experimental and theoretical data are compared. The results show sufficient correlation that confirms correctness of chosen methods and its applicability for theoretical studying compounds related to investigated ones.

Structural and magnetic properties of cadmium substituted manganese ferrites prepared by hydrothermal route

Energy Technology Data Exchange (ETDEWEB)

Mostafa, Nasser Y., E-mail: nmost69@yahoo.com [Faculty of Science, Taif University, P.O. Box: 888, Al-Haweiah, Taif (Saudi Arabia); Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt); Zaki, Z.I. [Faculty of Science, Taif University, P.O. Box: 888, Al-Haweiah, Taif (Saudi Arabia); Advanced Materials Division, Central Metallurgical R and D Institute (CMRDI), P.O. Box: 87 Helwan, Cairo (Egypt); Heiba, Z.K. [Faculty of Science, Taif University, P.O. Box: 888, Al-Haweiah, Taif (Saudi Arabia); Physics Department, Faculty of Science, Ain Shams University, Cairo (Egypt)

2013-03-15

Cd-substituted manganese ferrite Mn{sub 1-x}Cd{sub x}Fe{sub 2}O{sub 4} powders with x having values 0.0, 0.1, 0.3 and 0.5 have been synthesized by hydrothermal route at 180 Degree-Sign C in presence of NaOH as mineralizer. The obtained ferrite samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and vibrating sample magnetometer (VSM). The XRD analysis showed that pure single phases of cubic ferrites were obtained with x upto 0.3. However, sample with x{>=}0.5 showed hexagonal phase of cadmium hydroxide (Cd(OH){sub 2}) besides the ferrite phase. The increase in Cd-substitution upto x=0.3 leads to an increase in the lattice parameter as well as the average crystallite size of the prepared ferrites. The average crystallite size increased by increasing the Cd-content and was in the range of 39-57 nm. According to VSM results, the saturation magnetization increased with Cd ion substitution. - Highlights: Black-Right-Pointing-Pointer Hydrothermal synthesized of mono dispersed Cd-substituted MnFe{sub 2}O{sub 4} nanoparticles. Black-Right-Pointing-Pointer The change in Ms with increasing Cd-substitution was investigated Black-Right-Pointing-Pointer Pure single phases of cubic ferrites were obtained with x up to 0.3 Black-Right-Pointing-Pointer Sample with x{>=}0.5 showed hexagonal phase of Cd(OH){sub 2} beside the ferrite.

Novel radiosynthesis of PET HSV-tk gene reporter probes [18F]FHPG and [18F]FHBG employing dual Sep-Pak SPE techniques.

Science.gov (United States)

Wang, Ji-Quan; Zheng, Qi-Huang; Fei, Xiangshu; Mock, Bruce H; Hutchins, Gary D

2003-11-17

Positron emission tomography (PET) herpes simplex virus thymidine kinase (HSV-tk) gene reporter probes 9-[(3-[(18)F]fluoro-1-hydroxy-2-propoxy)methyl]guanine ([(18)F]FHPG) and 9-(4-[(18)F]fluoro-3-hydroxymethylbutyl)guanine ([(18)F]FHBG) were prepared by nucleophilic substitution of the appropriate tosylated precursors with [(18)F]KF/Kryptofix 2.2.2 followed by a quick deprotection reaction and purification with a simplified dual Silica Sep-Pak solid-phase extraction (SPE) method in 15-30% radiochemical yield.

A thick-interface model for diffusive and massive phase transformation in substitutional alloys

International Nuclear Information System (INIS)

Svoboda, J.; Vala, J.; Gamsjaeger, E.; Fischer, F.D.

2006-01-01

Based on the application of the thermodynamic extremal principle, a new model for the diffusive and massive phase transformation in multicomponent substitutional alloys is developed. Interfacial reactions such as the rearrangement of the lattice, solute drag and trans-interface diffusion are automatically considered by assigning a finite thickness and a finite mobility to the interface region. As an application of the steady-state solution of the derived evolution equations, the kinetics of the massive γ → α transformation in the Fe-rich Fe-Cr-Ni system is simulated. The thermodynamic properties of the interface may influence significantly the contact conditions at the interface as well as the conditions for the occurrence of the massive transformation and its kinetics. The model is also used for the simulation of the diffusion-induced grain boundary migration in the same system. By application of the model a realistic value for the Gibbs energy per unit interface area is obtained

Application of the theory of martensite crystallography to displacive phase transformations in substitutional nonferrous alloys

International Nuclear Information System (INIS)

Muddle, B.C.; Nie, J.F.; Hugo, G.R.

1994-01-01

It has been demonstrated that the theory of martensite crystallography is capable of accounting successfully for the form and crystallography of a range of plate- or lath-shaped transformation products, even when the formation of the product phase involves significant substitutional diffusion. These transformations include the precipitation of metastable hexagonal γ' (Ag 2 Al) plates in disordered face-centered cubic (fcc) solid-solution Al-Ag alloys, the formation of ordered AuCu II plates from disordered fcc solid solution in equiatomic Au-Cu alloys, and the formation of metastable 9R α 1 plates in ordered (B2) Cu-Zn and Ag-Cd alloys. The application of the theory to these transformations is reviewed critically and the features common to them identified. It is confirmed that, in all three transformations, the product phase produces relief at a free surface consistent with an invariant plane-strain shape change and that the transformations are thus properly described as displacive. The agreement between experimental observations and theoretical predictions of the transformation crystallography is in all cases excellent. It is proposed that successful application of the theory implies a growth mechanism in which the coherent or semicoherent, planar interface between parent and product phases maintains its structural identity during migration and that growth proceeds atom by atom in a manner consistent with the maintenance of a correspondence of lattice sites

Probing the reactivity of nucleophile residues in human 2,3-diphosphoglycerate/deoxy-hemoglobin complex by aspecific chemical modifications.

Science.gov (United States)

Scaloni, A; Ferranti, P; De Simone, G; Mamone, G; Sannolo, N; Malorni, A

1999-06-11

The use of aspecific methylation reaction in combination with MS procedures has been employed for the characterization of the nucleophilic residues present on the molecular surface of the human 2,3-diphosphoglycerate/deoxy-hemoglobin complex. In particular, direct molecular weight determinations by ESMS allowed to control the reaction conditions, limiting the number of methyl groups introduced in the modified globin chains. A combined LCESMS-Edman degradation approach for the analysis of the tryptic peptide mixtures yielded to the exact identification of methylation sites together with the quantitative estimation of their degree of modification. The reactivities observed were directly correlated with the pKa and the relative surface accessibility of the nucleophilic residues, calculated from the X-ray crystallographic structure of the protein. The results here described indicate that this methodology can be efficiently used in aspecific modification experiments directed to the molecular characterization of the surface topology in proteins and protein complexes.

Synthesis, characterization and electrochemical performance of Al-substituted Li_2MnO_3

International Nuclear Information System (INIS)

Torres-Castro, Loraine; Shojan, Jifi; Julien, Christian M.; Huq, Ashfia; Dhital, Chetan; Paranthaman, Mariappan Parans; Katiyar, Ram S.; Manivannan, Ayyakkannu

2015-01-01

Graphical abstract: Comparison of the cycling performances for pure Li_2MnO_3 and Al-substituted Li_2MnO_3 compounds at a current density of 10 mAh g"−"1 for 100 cycles. Al-substitution increases the spinel phase and hence improves the cycling behavior. - Highlights: • Pure and Al-doped Li_2MnO_3 compounds were synthesized by a Pechini method. • Presence of monoclinic and spinel phases confirmed by Raman and Neutron diffraction. • Al substitution occurs at both Mn and Li sites in Li_2MnO_3 structure. • Al substitution reduces Mn valence state and promotes spinel phase formation. • Stable cycling capacity of 70 mAh g"−"1 was observed for nominal Li_0_._5Al_0_._5MnO_3. - Abstract: Li_2MnO_3 is known to be electrochemically inactive due to Mn in tetravalent oxidation state. Several compositions such as Li_2MnO_3, Li_1_._5Al_0_._1_7MnO_3, Li_1_._0Al_0_._3_3MnO_3 and Li_0_._5Al_0_._5MnO_3 were synthesized by a sol–gel Pechini method. All the samples were characterized with XRD, Raman, XPS, SEM, Tap density and BET analyzer. XRD patterns indicated the presence of monoclinic phase for pristine Li_2MnO_3 and mixed monoclinic/spinel phases (Li_2_−_xMn_1_−_yAl_x_+_yO_3_+_z) for Al-substituted Li_2MnO_3 compounds. The Al substitution seems to occur both at Li and Mn sites, which could explain the presence of spinel phase. XPS analysis for Mn 2p orbital reveals a significant decrease in binding energy for Li_1_._0Al_0_._3_3MnO_3 and Li_0_._5Al_0_._5MnO_3 compounds. Cyclic voltammetry, charge/discharge cycles and electrochemical impedance spectroscopy were also performed. A discharge capacity of 24 mAh g"−"1 for Li_2MnO_3, 68 mAh g"−"1 for Li_1_._5Al_0_._1_7MnO_3, 58 mAh g"−"1 for Li_1_._0Al_0_._3_3MnO_3 and 74 mAh g"−"1 for Li_0_._5Al_0_._5MnO_3 were obtained. Aluminum substitutions increased the formation of spinel phase which is responsible for cycling.

Influence of the substitution of Ni for Fe on the microstructure evolution and magnetic phase transition in La(Fe1−xNix)11.5Si1.5 compounds

International Nuclear Information System (INIS)

Sun, Song; Ye, Rongchang; Long, Yi

2013-01-01

Graphical abstract: M–T curves show that all the compounds undergo a ferromagnetic–paramagnetic magnetic phase transition process. Besides, the Curie temperature T c of La(Fe 1−x Ni x ) 11.5 Si 1.5 (x = 0, 0.01, 0.02, 0.03) compounds increase monotonously from 195 K to 219 K when Ni content x varies from 0 to 0.03. Highlights: ► We substituted Fe by new element Ni in La(Fe 1−x Ni x ) 11.5 Si 1.5 compounds. ► The microstructure evolution, magnetic phase transition and Curie temperature of La(Fe 1−x Ni x ) 11.5 Si 1.5 compounds were investigated. ► The small substitution of Ni for Fe in La(Fe 1−x Ni x ) 11.5 Si 1.5 compounds enhances the formation of 1:13 phase and helps the elimination of impurity phase significantly. ► The Curie temperature T C of La(Fe 1−x Ni x ) 11.5 Si 1.5 compounds increase monotonously from 195 K to 219 K when x varies from 0 to 0.03. - Abstract: The influence of Ni substitution on the microstructure evolution and magnetic phase transition has been investigated in La(Fe 1−x Ni x ) 11.5 Si 1.5 (x = 0, 0.01, 0.02, 0.03) compounds. Results show that partial substitution of Ni for Fe in La(Fe 1−x Ni x ) 11.5 Si 1.5 (x = 0, 0.01, 0.02, 0.03) alloys promotes fining of the as-cast microstructure. Besides, the formation of 1:13 phase and the elimination of impurity phases is facilitated significantly when annealed at 1373 K for 5 days. Large amounts of inhomogeneities are present in the annealed LaFe 11.5 Si 1.5 alloy. While almost single 1:13 phase is obtained in La(Fe 1−x Ni x ) 11.5 Si 1.5 (x = 0.02, 0.03) alloys. Moreover, the Curie temperature T C of La(Fe 1−x Ni x ) 11.5 Si 1.5 (x = 0, 0.01, 0.02, 0.03) compounds increase monotonously from 195 K to 219 K when Ni content x varies from 0 to 0.03.

Organic Chemistry Students' Fragmented Ideas about the Structure and Function of Nucleophiles and Electrophiles: A Concept Map Analysis

Science.gov (United States)

Anzovino, Mary E.; Bretz, Stacey Lowery

2016-01-01

Organic chemistry students struggle with multiple aspects of reaction mechanisms and the curved arrow notation used by organic chemists. Many faculty believe that an understanding of nucleophiles and electrophiles, among other concepts, is required before students can develop fluency with the electronpushing formalism (EPF). An expert concept map…

High coercivity Gd-substituted Ba hexaferrites, prepared by chemical coprecipitation

Science.gov (United States)

Litsardakis, G.; Manolakis, I.; Serletis, C.; Efthimiadis, K. G.

2008-04-01

A series of Gd-substituted Ba hexaferrites with nominal formula (Ba1-xGdx)Oṡ5.25 Fe2O3 (x=0-0.30) were prepared by the chemical coprecipitation method from nitrate precursors and heating at T =800-1200°C for 2h. The samples have been examined by x-ray diffraction, vibrating-sample magnetometer, and scanning electron microscopy methods. Gd substituted samples form single phase materials with the M-type hexaferrite structure at all heating temperatures, in the range of x ⩽0.10-0.20. The saturation magnetization (at 1.8T) varies slightly with x in most cases and, for x =0.05-0.10, it increases up to 66.7Am2/kg, exceeding the value of the unsubstituted hexaferrite. A strong enhancement of the coercivity is observed for all substituted samples, with maximum values Hc=457kA/m for the single-phase x =0.10 sample annealed at 1000°C and Hc=477kA/m for the x =0.25 sample annealed at 1100°C which contains Fe2O3 and GdFeO3 impurities. As the variation of coercivity with either substitution rate (x ) or annealing temperature is not monotonic, three different factors may account for the high coercivities that are obtained: (a) an inhibition of grain growth due to the presence of Gd, (b) a possible inherent effect on magnetocrystalline anisotropy, especially for single phase samples, and (c) a microstructural effect of secondary phases.

The effect of yttrium substitution on the magnetic properties of magnetite nanoparticles

International Nuclear Information System (INIS)

Mozaffari, M.; Amighian, J.; Tavakoli, R.

2015-01-01

Superparamagnetic Y-substituted magnetite (Y x Fe 3–x O 4 ,with x=0.00, 0.10, 0.15, 0.20 and 0.40) nanoparticles were synthesized via hydrothermal reduction route in the presence of citric acid. The synthesized nanoparticles were characterized by X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), vibrating sample magnetometry (VSM) and gradient field thermomagnetic measurement. The results showed that a minimum amount of citric acid is required to obtain single phase Y-substituted magnetite nanoparticles. Citric acid acts as a modulator and reducing agent in the formation of spinel structure and controls nanoparticle size and crystallinity. Mean crystallite sizes of the single-phase powders were estimated by Williamson–Hall method. Curie temperature measurement of the samples shows that as yttrium content increases, the Curie temperature decreases. Magnetic measurements show that the saturation magnetization of the samples decreases as x increases up to 0.15 and then increases to x=0.20 and finally decreases again for x=0.40. - Highlights: • Single phase yttrium substituted magnetite nanoparticles were synthesized by hydrothermal-reduction route. • Citric acid plays a key role in reduction of Fe 3+ to Fe 2+ , which is necessary for the formation of magnetite phase. • It is possible to substitute yttrium ions for iron ones as high as x=0.4 by hydrothermal reduction route. • Pure magnetite nanoparticles prepared by this route has a high saturation magnetization. • Yttrium substituted magnetite nanoparticles are superparamagnet at room temperature

Synthesis of 2,6-trans- and 3,3,6-trisubstituted tetrahydropyran-4-ones from Maitland-Japp derived 2H-dihydropyran-4-ones: a total synthesis of diospongin B.

Science.gov (United States)

Clarke, Paul A; Nasir, Nadiah Mad; Sellars, Philip B; Peter, Alejandra M; Lawson, Connor A; Burroughs, James L

2016-07-12

6-Substituted-2H-dihydropyran-4-one products of the Maitland-Japp reaction have been converted into tetrahydropyrans containing uncommon substitution patterns. Treatment of 6-substituted-2H-dihydropyran-4-ones with carbon nucleophiles led to the formation of tetrahydropyran rings with the 2,6-trans-stereochemical arrangement. Reaction of the same 6-substituted-2H-dihydropyran-4-ones with l-Selectride led to the formation of 3,6-disubstituted tetrahydropyran rings, while trapping of the intermediate enolate with carbon electrophiles in turn led to the formation 3,3,6-trisubstituted tetrahydropyran rings. The relative stereochemical configuration of the new substituents was controlled by the stereoelectronic preference for pseudo-axial addition of the nucleophile and trapping of the enolate from the opposite face. Application of these methods led to a synthesis of the potent anti-osteoporotic diarylheptanoid natural product diospongin B.

Use of rice straw ash as substitute of feldspar in triaxial porcelain

International Nuclear Information System (INIS)

Alvaro Guzman, A.; Silverio Delvasto, A.; Enrique Sanchez, V.; Vicente Amigo, B.

2013-01-01

The substitution of raw materials for processing high energy consumption materials by agricultural and agro-industrial wastes causes a positive impacts on the environment preservation. One of these residues is rice straw, which according to FAO estimation, its annual production is about 600 million tons. In this research was studied the use of rice straw ash as substitute of the use of feldspar in the white ware production. Clay-feldspar-quartz porcelains are referred to as triaxial white ware. Specimens of semidry triaxial mixtures, where feldspar was substituted for different percentages of CTA, were prepared by uniaxial pressing, followed by drying and sintering. Physical and mechanical properties of sintered bodies were evaluated. The porosity and the compressive strength of the fired pieces do increase with additions of up to 75% of CTA in substitution of feldspar. Their mineralogical phases were determined by DRX and SEM; grains of quartz, and needles of primary and secondary mullite were identified in a vitreous phase. It was concluded that feldspar can be substituted positively by CTA in white ware pastes. (Author) 22 refs.

The improved magnetic properties in phosphorus substituted Pr-Fe-P-B nanocomposites

International Nuclear Information System (INIS)

Jin, Z.Q.; Zhang, Y.; Wang, H.L.; Klaessig, A.; Bonder, M.; Hadjipanayis, G.C.

2003-01-01

Phosphorus substituted (Pr,Tb) 8 (Fe,Nb,Zr,P) 88 B 4 nanocomposites have been produced by melt-spinning. The effects of phosphorus substitution as well as wheel speed on the crystallization behavior and magnetic properties of the melt-spun samples have been investigated. With the substitution of phosphorus, the crystallization temperature of amorphous phase increases. The optimum wheel speed was found to be around 25 m/s for as-spun ribbons and 40 m/s for the annealed samples, both of which present excellent second quadrant hysteresis loop shapes due to the fine grain size of α-Fe which is around 20 nm. The addition of phosphorus also greatly improves the coercivity of Pr-Fe-B nanocomposites without a significant loss of saturation magnetization. A higher coercivity of 9.2 kOe in P-substituted samples was obtained as compared to 8.1 kOe in P-free samples. This is attributed to a narrower temperature span between the crystallization into TbCu 7 structure and the transformation into the 2:14:1 phase caused by the phosphorus substitution

Novel synthesis and characterization of an AB-type carbonate-substituted hydroxyapatite.

Science.gov (United States)

Gibson, Iain R; Bonfield, William

2002-03-15

A novel synthesis route has been developed to produce a high-purity mixed AB-type carbonate-substituted hydroxyapatite (CHA) with a carbonate content that is comparable to the type and level observed in bone mineral. This method involves the aqueous precipitation in the presence of carbonate ions in solution of a calcium phosphate apatite with a Ca/P molar ratio greater than the stoichiometric value of 1.67 for hydroxyapatite (HA). The resulting calcium-rich carbonate-apatite is sintered/heat-treated in a carbon dioxide atmosphere to produce a single-phase, crystalline carbonate-substituted hydroxyapatite. In contrast to previous methods for producing B- or AB-type carbonate-substituted hydroxyapatites, no sodium or ammonium ions, which would be present in the reaction mixture from the sodium or ammonium carbonates commonly used as a source of carbonate ions, were present in the final product. The chemical and phase compositions of the carbonate-substituted hydroxyapatite was characterized by X-ray fluorescence and X-ray diffraction, respectively, and the level and nature of the carbonate substitution were studied using C-H-N analysis and Fourier transform infrared spectroscopy, respectively. The carbonate substitution improves the densification of hydroxyapatite and reduces the sintering temperature required to achieve near-full density by approximately 200 degrees C compared to stoichiometric HA. Initial studies have shown that these carbonate-substituted hydroxyapatites have improved mechanical and biologic properties compared to stoichiometric hydroxyapatite. Copyright 2001 John Wiley & Sons, Inc. J Biomed Mater Res 59: 697-708, 2002

Chemical synthesis and stabilization of magnesium substituted brushite

Energy Technology Data Exchange (ETDEWEB)

Lee, Donghyun [Department of Biomedical Engineering, Chung-Ang University, 221 Heukseok-Dong, Dongjak-Gu, Seoul 156-756 (Korea, Republic of); Kumta, Prashant N., E-mail: pkumta@pitt.edu [Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Department of Mechanical Engineering and Materials Sceince, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15260 (United States)

2010-08-30

Hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}) is the most ubiquitous calcium phosphate phase used in implant coatings and more recently in gene/drug delivery applications due to its chemical stability under normal physiological conditions (37 deg. C, pH {approx} 7.5, 1 atm.). However, different calcium phosphate phases, such as brushite (CaH(PO{sub 4}){center_dot}2(H{sub 2}O)) and tricalcium phosphate (Ca{sub 3}(PO{sub 4}){sub 2}) which are thermodynamically unstable under physiological conditions are also being explored for biomedical applications. One way of stabilizing these phases under physiological conditions is to introduce magnesium to substitute for calcium in the brushite lattice. The role of magnesium as a stabilizing agent for synthesizing brushite under physiological conditions at room temperature has been studied. Chemical analysis, Fourier transform infrared spectroscopy and X-ray diffraction have also been conducted to validate the formation of magnesium substituted brushite under physiological conditions.

A sustainable process for gram-scale synthesis of stereoselective ...

Indian Academy of Sciences (India)

We have developed a new, simple and sustainable process for stereoselective synthesis of aryl substituted (E)-2-thiocyanatoacrylic acids by nucleophilic substitution and Knoevenagel condensation involving chloroacetic acid, ammonium thiocyanate and aromatic aldehydes at room temperature. The selectivity was ...

Nucleophilic radioiodination of 6-bromocholesterol via non-isotopic exchange reaction in molten state

International Nuclear Information System (INIS)

El-Shaboury, G.; Farah, K.; El-Tawoosy, M.

2001-01-01

A synthetic method for preparing radioiodinated 6-[ 125 I]iodocholesterol [CL-6- 125 I] for adrenal evaluation is described. The radioiodine atom was incorporated onto the cholesterol molecule via non-isotopic exchange between 6-bromocholesterol [CL-6-Br] and radioiodine as iodide ion [ 125 I - ] in a molten state. The different parameters affecting the yield of exchange were investigated using 125 I (T 1/2 ≅ 60 d) to centralize the different physical and chemical reaction conditions and purification of the final product as pure as 6-[ 125 I]iodocholesterol. The method was suitable to either 131 I (T 1/2 ≅ 8 d) nucleophilic radioiodination which facilitates the scanning of the adrenal for a few days after administration or the use of 124 I (T 1/2 ≅ 4.16 d) nucleophilic radioiodination for PET evaluation of the adrenal. TLC as well as HPLC chromatographic analysis is used to determine the efficiency of the exchange reactions under different chemical reaction conditions and to monitor the stability of the final product as pure as CL-6- 125 I with radiochemical purity of ≅99%. This no-carrier-added method improved the speed of the reaction and affords high radiochemical yield of 90% and suitable specific activity due to the use of CL-6-Br rather than CL-6-I as substrate. Kinetic studies revealed second order iodine-bromine exchange reaction. The activation energy for the exchange reaction in ammonium acetate (m.p. 114 deg C) was calculated to be 4.576 kcal/mole. (author)

Stereoselective Preparation of N-Alkyl Dipeptide Analogues via Dynamic Kinetic Resolution of α-Halo Acyl Amino Esters

International Nuclear Information System (INIS)

Shin, Eun Kyoung; Chang, Ji Yeon; Kim, Hyun Jung; Kim, Yong Tae; Park, Yong Sun

2006-01-01

We have shown that dynamic kinetic resolution of α-bromo and α-chloro amides in nucleophilic substitution reaction can be successfully applied towards the preparation of various N-terminal functionalized dipeptide analogues. The stereochemical aspects of the results showed that stereoselectivity depends critically on the structures of amine nucleophiles. This mild and practical method can be run on a multi-gram scale without any special precautions and should be applicable to stereoselective syntheses of various peptidomimetics. Extension of this synthetic methodology to dynamic resolution of N-(α-haloacetyl) peptides in the stereospecific nucleophilic substitution (S N 2) could be an attractive synthetic strategy for asymmetric syntheses of peptide analogues. Recently it has been shown from our group that the chiral information of adjacent amino acid residue is efficiently transferred to the new C-N bond formation at α-halo carbon center for asymmetric syntheses of di-, tri- and tetrapeptide analogues. The α-halo stereogenic center of undergoes rapid epimerization in the presence of diisopropylethylamine (DIEA) and tetrabutylammonium iodide (TBAI), and (αS) reacts with the nucleophile preferentially to provide the dipeptide analogue (αR). The mechanistic investigation showed that this is a case of dynamic kinetic resolution, in which the stereoselectivity is determined by the difference in the diastereomeric transition state energies for the reaction with the nucleophiles. Herein we describe our recent progress to extend the scope of the methodology to stereoselective preparation of N-terminal functionalized dipeptide analogues with various amine nucleophiles

The substitution reaction of (CNC)Fe-2N₂ with CO.

Science.gov (United States)

Liu, Hongyan; Liu, Shuangshuang; Zhang, Xiang

2013-06-01

The substitution mechanism of two N₂ ligands in (CNC)Fe-2N₂ replaced by CO was studied theoretically at the B3LYP/LACVP* level. Both SN1 and SN₂ mechanisms were considered. The calculated results for the gas phase suggested that: 1) in SN1 mechanism, N₂ elimination, which involves S₀-T₁ PESs crossing, is the rate control step for both substitution stages. The barrier heights are 9.7 kcal mol(-1) and 13.05 kcal mol(-1), respectively. 2) In SN2 mechanism, the calculated barrier heights on LS PES are respectively 13.7 and 19.83 kcal mol(-1) for the two substitution steps, but S₀-T₁ PESs crossing lowers the two barriers to 10.7 and 15.7 kcal mol(-1), respectively. 3) Inclusion of solvation effect of THF by PCM model, the relative energies of all the key species (including minima, transition states and S₀-T₁ crossing points) do not have great difference from their gas phase relative energies. Considering that for each substitution step, SN1 barrier heights is slightly smaller than SN2 barrier, SN1 mechanism seems to be slightly preferable to SN2 mechanism.

Relationship between Al content and substitution mechanism of Al-bearing anhydrous bridgmanites

Science.gov (United States)

Noda, M.; Inoue, T.; Kakizawa, S.

2017-12-01

It is considered that two substitution mechanisms, Tschermak substitution and oxygen vacancy substitution, exist in MgSiO3 bridgmanite for the incorporation of Al in anhydrous condition. Kubo and Akaogi (2000) has conducted the phase equilibrium experiment in the system MgSiO3-Al2O3, and established the phase diagram up to 28 GPa. However the careful observation in the bridgmanite shows that the chemical compositions are slightly deviated from Tschermak substitution join. The same tendency can be also observed in the run products by Irifune et al. (1996). This result indicates that pure Tschermak substitution bridgmanite cannot be stable even in the MgSiO3-Al2O3 join experiment. However, the previous studies used powder samples as the starting materials, so the absorbed water may affect the results. Therefore, we tried to conduct the experiment in the join MgSiO3-Al2O3 in extremely anhydrous condition to clarify whether the pure Tschermak substitution bridgmanite can be stable or not. In addition, we also examined the stability of oxygen vacancy bridgmanite in the extremely anhydrous condition for the comparison. The high pressure synthesis experiments were conducted at 28 GPa and 1600-1700° for 1hour using a Kawai-type multi-anvil apparatus. Four different Al content samples were prepared as the starting materials along the ideal substitution line of Tschermak (Al=0.025, 0.05, 0.1, 0.15 mol) and oxygen-vacancy (Al=0.025, 0.05, 0.075, 0.1 mol) substitutions, respectively (when total cation of 2). The glass rods were used as the starting materials to eliminate the absorbed water on the sample surface. The chemical compositions of the synthesized bridgmanite could not be measured by EPMA because of small grain size less than submicron. Therefore the chemical compositions were estimated from the result of the XRD pattern by subtracting the amount of the other phases. The estimated chemical compositions of Tschermak substitution bridgmanites were consistent with the

Synthesis and Optical Properties of Trioxatriangulenium Dyes with One and Two Peripheral Amino Substituents

DEFF Research Database (Denmark)

Sørensen, Thomas Just; Laursen, Bo Wegge

2010-01-01

-substituted triphenylmethylium (TPM) compounds by aromatic nucleophilic substitution with secondary amines and subsequent intramolecular ring closure. The optical properties of the new triangulenium dyes and their TPM precursors were investigated and compared to those of known TPM and xanthenium dyes. The optical properties...

Macroporous synthetic hydroxyapatite bioceramics for bone substitute applications

CSIR Research Space (South Africa)

Thomas, ME

1999-08-01

Full Text Available An improved strategy is described for the manufacture of macroporous hydroxyapatite bioceramics for bone substitute applications. This is based on a modified fugitive phase technique, which allows production of relatively open, high-strength devices...

The development of catalytic nucleophilic additions of terminal alkynes in water.

Science.gov (United States)

Li, Chao-Jun

2010-04-20

One of the major research endeavors in synthetic chemistry over the past two decades is the exploration of synthetic methods that work under ambient atmosphere with benign solvents, that maximize atom utilization, and that directly transform natural resources, such as renewable biomass, from their native states into useful chemical products, thus avoiding the need for protecting groups. The nucleophilic addition of terminal alkynes to various unsaturated electrophiles is a classical (textbook) reaction in organic chemistry, allowing the formation of a C-C bond while simultaneously introducing the alkyne functionality. A prerequisite of this classical reaction is the stoichiometric generation of highly reactive metal acetylides. Over the past decade, our laboratory and others have been exploring an alternative, the catalytic and direct nucleophilic addition of terminal alkynes to unsaturated electrophiles in water. We found that various terminal alkynes can react efficiently with a wide range of such electrophiles in water (or organic solvent) in the presence of simple and readily available catalysts, such as copper, silver, gold, iron, palladium, and others. In this Account, we describe the development of these synthetic methods, focusing primarily on results from our laboratory. Our studies include the following: (i) catalytic reaction of terminal alkynes with acid chloride, (ii) catalytic addition of terminal alkynes to aldehydes and ketones, (iii) catalytic addition of alkynes to C=N bonds, and (iv) catalytic conjugate additions. Most importantly, these reactions can tolerate various functional groups and, in many cases, perform better in water than in organic solvents, clearly defying classical reactivities predicated on the relative acidities of water, alcohols, and terminal alkynes. We further discuss multicomponent and enantioselective reactions that were developed. These methods provide an alternative to the traditional requirement of separate steps in

Glassy carbon electrode modified with horse radish peroxidase/organic nucleophilic-functionalized carbon nanotube composite for enhanced electrocatalytic oxidation and efficient voltammetric sensing of levodopa

Energy Technology Data Exchange (ETDEWEB)

Shoja, Yalda; Rafati, Amir Abbas, E-mail: aa_rafati@basu.ac.ir; Ghodsi, Javad

2016-01-01

A novel and selective enzymatic biosensor was designed and constructed for voltammetric determination of levodopa (L-Dopa) in aqueous media (phosphate buffer solution, pH = 7). Biosensor development was on the basis of to physically immobilizing of horse radish peroxidase (HRP) as electrochemical catalyst by sol–gel on glassy carbon electrode modified with organic nucleophilic carbon nanotube composite which in this composite p-phenylenediamine (pPDA) as organic nucleophile chemically bonded with functionalized MWCNT (MWCNT-COOH). The results of this study suggest that prepared bioorganic nucleophilic carbon nanotube composite (HRP/MWCNT-pPDA) shows fast electron transfer rate for electro oxidation of L-Dopa because of its high electrochemical catalytic activity toward the oxidation of L-Dopa, more −NH{sub 2} reactive sites and large effective surface area. Also in this work we measured L-Dopa in the presence of folic acid and uric acid as interferences. The proposed biosensor was characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), FT-IR spectroscopy and cyclic voltammetry (CV). The differential pulse voltammetry (DPV) was used for determination of L-Dopa from 0.1 μM to 1.9 μM with a low detection limit of 40 nM (for S/N = 3) and sensitivity was about 35.5 μA/μM. Also this biosensor has several advantages such as rapid response, high stability and reproducibility. - Highlights: • Glassy carbon electrode modified by a novel composite in which pPDA as nucleophile is chemically attached to MWCNTs. • The developed biosensor exhibited excellent electrocatalytic activity in electrochemically determination of L-Dopa. • The biosensor showed acceptable sensitivity, reproducibility, detection limit, selectivity and stability. • MWCNT-pPDA provides a good electrical conductivity and large effective surface area for enzyme immobilization.

Preparation of Hydroxypropyl-β-cyclodextrin Cross-linked Multi-walled Carbon Nanotubes and Their Application in Enantioseparation of Clenbuterol

Institute of Scientific and Technical Information of China (English)

Yu Jingang; Huang Dushu; Huang Kelong; Hong Yong

2011-01-01

A method of cross-linking multi-walled carbon nanotubes by a nucleophilic substitution of brominated multi-walled carbon nanotubes using hydroxypropyl-β-cyclodextrin anions was studied. The modified multi-walled carbon nanotube samples were characterized using thermogravimetric analysis, energy-dispersive X-ray spectros-copy, transmission electron microscopy, scanning electron microscopy, Raman spectroscopy and Fourier transform infrared spectroscopy. The hydroxypropyi-β-cyclodextrin modified multi-walled carbon nanotubes were used as a chiral stationary phase additive for thin-layer chromatography to separate clenbuterol enantiomers, and the chiral separation factor was increased.

Glycosyl Cross-Coupling of Anomeric Nucleophiles: Scope, Mechanism, and Applications in the Synthesis of Aryl C-Glycosides.

Science.gov (United States)

Zhu, Feng; Rodriguez, Jacob; Yang, Tianyi; Kevlishvili, Ilia; Miller, Eric; Yi, Duk; O'Neill, Sloane; Rourke, Michael J; Liu, Peng; Walczak, Maciej A

2017-12-13

Stereoselective manipulations at the C1 anomeric position of saccharides are one of the central goals of preparative carbohydrate chemistry. Historically, the majority of reactions forming a bond with anomeric carbon has focused on reactions of nucleophiles with saccharide donors equipped with a leaving group. Here, we describe a novel approach to stereoselective synthesis of C-aryl glycosides capitalizing on the highly stereospecific reaction of anomeric nucleophiles. First, methods for the preparation of anomeric stannanes have been developed and optimized to afford both anomers of common saccharides in high anomeric selectivities. We established that oligosaccharide stannanes could be prepared from monosaccharide stannanes via O-glycosylation with Schmidt-type donors, glycal epoxides, or under dehydrative conditions with C1 alcohols. Second, we identified a general set of catalytic conditions with Pd 2 (dba) 3 (2.5 mol%) and a bulky ligand (JackiePhos, 10 mol%) controlling the β-elimination pathway. We demonstrated that the glycosyl cross-coupling resulted in consistently high anomeric selectivities for both anomers with mono- and oligosaccharides, deoxysugars, saccharides with free hydroxyl groups, pyranose, and furanose substrates. The versatility of the glycosyl cross-coupling reaction was probed in the total synthesis of salmochelins (siderophores) and commercial anti-diabetic drugs (gliflozins). Combined experimental and computational studies revealed that the β-elimination pathway is suppressed for biphenyl-type ligands due to the shielding of Pd(II) by sterically demanding JackiePhos, whereas smaller ligands, which allow for the formation of a Pd-F complex, predominantly result in a glycal product. Similar steric effects account for the diminished rates of cross-couplings of 1,2-cis C1-stannanes with aryl halides. DFT calculations also revealed that the transmetalation occurs via a cyclic transition state with retention of configuration at the anomeric

Synthesis of meta-substituted monodentate phosphinite ligands and ...

Indian Academy of Sciences (India)

SATEJ S DESHMUKH

from organic synthesis, phosphinite ligands find appli- cations in a variety of ... thesis of meta-substituted phosphinite ligands is rarely reported.18 This is most ... 1.9 μm; mobile phase used, 90% methanol + 10% water +. 0.1% formic acid) ...

Methacrylate monolithic columns functionalized with epinephrine for capillary electrochromatography applications.

Science.gov (United States)

Carrasco-Correa, Enrique Javier; Ramis-Ramos, Guillermo; Herrero-Martínez, José Manuel

2013-07-12

Epinephrine-bonded polymeric monoliths for capillary electrochromatography (CEC) were developed by nucleophilic substitution reaction of epoxide groups of poly(glycidyl-methacrylate-co-ethylenedimethacrylate) (poly(GMA-co-EDMA)) monoliths using epinephrine as nucleophilic reagent. The ring opening reaction under dynamic conditions was optimized. Successful chemical modification of the monolith surface was ascertained by in situ Raman spectroscopy characterization. In addition, the amount of epinephrine groups that was bound to the monolith surface was evaluated by oxidation of the catechol groups with Ce(IV), followed by spectrophotometric measurement of unreacted Ce(IV). About 9% of all theoretical epoxide groups of the parent monolith were bonded to epinephrine. The chromatographic behavior of the epinephrine-bonded monolith in CEC conditions was assessed with test mixtures of alkyl benzenes, aniline derivatives and substituted phenols. In comparison to the poly(GMA-co-EDMA) monoliths, the epinephrine-bonded monoliths exhibited a much higher retention and slight differences in selectivity. The epinephrine-bonded monolith was further modified by oxidation with a Ce(IV) solution and compared with the epinephrine-bonded monoliths. The resulting monolithic stationary phases were evaluated in terms of reproducibility, giving RSD values below 9% in the parameters investigated. Copyright © 2013 Elsevier B.V. All rights reserved.

Synthesis of 19-substituted geldanamycins with altered conformations and their binding to heat shock protein Hsp90

Science.gov (United States)

Kitson, Russell R. A.; Chang, Chuan-Hsin; Xiong, Rui; Williams, Huw E. L.; Davis, Adrienne L.; Lewis, William; Dehn, Donna L.; Siegel, David; Roe, S. Mark; Prodromou, Chrisostomos; Ross, David; Moody, Christopher J.

2013-01-01

The benzoquinone ansamycin geldanamycin and its derivatives are inhibitors of heat shock protein Hsp90, an emerging target for novel therapeutic agents both in cancer and in neurodegeneration. However, toxicity of these compounds to normal cells has been ascribed to reaction with thiol nucleophiles at the quinone 19-position. We reasoned that blocking this position would ameliorate toxicity, and that it might also enforce a favourable conformational switch of the trans-amide group into the cis-form required for protein binding. We report here an efficient synthesis of such 19-substituted compounds and realization of our hypotheses. Protein crystallography established that the new compounds bind to Hsp90 with, as expected, a cis-amide conformation. Studies on Hsp90 inhibition in cells demonstrated the molecular signature of Hsp90 inhibitors: decreases in client proteins with compensatory increases in other heat shock proteins in both human breast cancer and dopaminergic neural cells, demonstrating their potential for use in the therapy of cancer or neurodegenerative diseases. PMID:23511419

1-Hydroxyethyl-2-Substituted Phenoxymethyl Benzimidazoles: Synthesis and Crystal Structures

International Nuclear Information System (INIS)

Wu, J.; Wang, Z.; Gu, H.; Chen, W.; Zhao, L.; Zhao, C.

2016-01-01

Five novel 1-hydroxyethyl-2-substituted phenoxymethyl benzimidazoles c1-c5 were successfully synthesized by a three-step route. Firstly, five substituted phenoxymethyl acids a1-a5 were prepared by the O-carboxymethylation reaction of the starting substituted phenols under microwave irradiation. Then, these compounds reacted with o-phenylendiamine to get the key intermediates 2-substituted phenoxymethyl benzimidazoles b1-b5. At last, the target compounds were synthesized by the N-hydroxyethylation reaction of b1-b5 with 2-chloroethyl alcohol through the solid-liquid phase transfer catalysis method, where tetrabutyl ammonium bromide (TBAB) was used as the catalyst. The structures of the target compounds were well characterized and verified by elemental analysis, MS, IR, 1H NMR, 13C NMR and single crystal X-ray diffraction analysis. (author)

Onium ions. XVI. Hydrogen--deuterium exchange accompanying the cleavage of ammonium (tetradeuterioammonium) trifluoroacetate by lithium deuteride (hydride) indicating Sn2 like nucleophilic displacement at quaternary nitrogen through pentacoordinated NH5

International Nuclear Information System (INIS)

Olah, G.A.; Donovan, D.J.; Shen, J.; Klopman, G.

1975-01-01

The reactions of ammonium trifluoroacetate and lithium hydride, of ammonium trifluoroacetate and lithium deuteride, and of tetradeuteroammonium trifluoroacetate and lithium hydride were studied in an attempt to prove experimentally nucleophilic displacement through the formation of pentacoordinated NH 5 . Significant isotopic scramblings were observed in the reaction products. An analysis of possible side reactions indicated that the most reasonable explanation for the reaction products obtained is the attack of D - on the quarternary hydrogen of NH 4 + in an SN2-like fashion causing exchange to occur via pentacoordinated NH 4 D. The possibility of a real pentacoordinated intermediate was also considered. CNDO/2 calculations show that a nucleophilic attack on hydrogen is favored, but the alternative attack on nitrogen can not be dismissed because of the experimental data. The reaction of NF 4 + SbF 6 - and LiF could indicate the possibility of nucleophilic attack on nitrogen. (U.S.)

Characterization of hydroxyapatite substituted with silicon

International Nuclear Information System (INIS)

Silva, H.M. da; Soares, G.A.; Mateescu, M.; Anselme, K.; Palard, M.; Champion, E.

2009-01-01

Incorporation of silicon (Si) ions into hydroxyapatite structure (HA) influences on physical, chemical and physiological properties. Some studies reported the improved bioactivity Si substitution, and it also accelerates the biomineralization process. The main objective of this work is to characterize stoichiometric hydroxyapatite and hydroxyapatite substituted with 1.13% in weight of Si (SiHA) using a wet precipitation method followed by a heat treatment. SEM/EDS, AFM, DRX and FTIR analyses were used to characterize the samples. EDS and FTIR results confirmed the presence of Si. Silicon induces small changes on crystal structure of HA, not detected on X-ray diffraction patterns of sintered tablets of SiHA and HA. No secondary phases were observed, that indicates the Si had entered the HA lattice. (author)

The Effect of 24c-Site (A) Cation Substitution on the Tetragonal-Cubic Phase Transition in Li7-xLa3-xAxZr2O12 Garnet-Based Ceramic Electrolyte

Science.gov (United States)

2013-01-01

with Al [16,20]. In KrogereVink notation, the relationships for Ta and Nb substitution for Zr are as follows [20,22,23]: Ta$ Zr ¼ V0Li (3) Nb ...garnet phase. < CeO2 precipitation at grain boundaries increases grain boundary resistance . < Super-valent cation substitution likely stabilizes the...Introduction Li-ion batteries have played a vital role in the development of current generation mobile devices, microelectronics and electric vehicles [1]. Due

DFT analysis of the nucleophilicity of substituted pyridines and ...

Indian Academy of Sciences (India)

the molecules in training and test sets indicated the vali- dity of the methods (see ...... Harris R L N, Huppatz J L, Phillips J N and Teitei T. 1979 In Advances in ... Geerlings P, De Proft F and Langenaeker W 2003 Chem. Rev. 103 1793. 17.

Iron-substituted AB5-type MH electrode

Indian Academy of Sciences (India)

To study their electrochemical properties via measurements of discharge capacity, activation ... the higher electron attracting power of Fe, when substituted in small .... The phase analysis through XRD .... Only a small extra XRD peak of CeO2 is present in the alloy .... The open circuit voltage of MH electrode with respect to ...

Structural and magnetic properties of Co-substituted NiCu ferrite nanopowders

Energy Technology Data Exchange (ETDEWEB)

Li, Le-Zhong, E-mail: lezhongli@cuit.edu.cn; Zhong, Xiao-Xi; Wang, Rui; Tu, Xiao-Qiang; Peng, Long

2017-07-01

Highlights: • There are Fe{sub 2}O{sub 3} and CuO impurity phases when x ≤ 0.10. • The saturation magnetization and coercivity monotonically increase with the increase of Co substitution. • The anisotropy constant increases with the increase of Co substitution. • The calculated and observed values of magneton number are in close agreement with each other. - Abstract: Co-substituted NiCu ferrite nanopowders with the chemical formula Ni{sub 0.5−x}Cu{sub 0.5−x}Co{sub 2x}Fe{sub 2}O{sub 4} (0 ≤ x ≤ 0.50) were synthesized by sol-gel auto-combustion method. The effects of Co substitution on the cation distribution, structural and magnetic properties of the NiCu ferrite nanopowders have been investigated. Differential thermal analysis-thermogravimetry (DTA-TG), X-ray diffraction (XRD), transmission electron microscope (TEM) and vibrating sample magnetometer (VSM) measurements were used to characterize the chemical, structural and magnetic properties of the ferrite nanopowders, respectively. The DTA-TG results indicate that there are three steps of the combustion process. XRD results indicate that there are Fe{sub 2}O{sub 3} and CuO impurity phases when x ≤ 0.10. Furthermore, the lattice parameter increases, and the X-ray density and the average crystallite size decrease with increasing Co substitution. And the obtained particle size from TEM image is in very good agreement with the average crystallite size estimated by XRD measurements. The saturation magnetization and coercivity monotonically increase with the increase of Co substitution. The increase of the saturation magnetization is due to the substitution of Ni{sup 2+} and Cu{sup 2+} ions with lower magnetic moment by Co{sup 2+} ions with higher magnetic moment on the octahedral sites. And the increase of the coercivity is mainly due to the increase of magnetocrystalline anisotropy energy.

Quantitative Structure–Property Relationship (QSPR Models for a Local Quantum Descriptor: Investigation of the 4- and 3-Substituted-Cinnamic Acid Esterification

Directory of Open Access Journals (Sweden)

Cláudio E. Rodrigues-Santos

2015-09-01

Full Text Available In this work, the theoretical description of the 4- and 3-substituted-cinnamic acid esterification with different electron donating and electron withdrawing groups was performed at the B3LYP and M06-2X levels, as a two-step process: the O-protonation and the nucleophile attack by ethanol. In parallel, an experimental work devoted to the synthesis and characterization of the substituted-cinnamate esters has also been performed. In order to quantify the substituents effects, quantitative structure–property relationship (QSPR models based on the atomic charges, Fukui functions and the Frontier Effective-for-Reaction Molecular Orbitals (FERMO energies were investigated. In fact, the Fukui functions, ƒ+C and ƒ−O, indicated poor correlations for each individual step, and in contrast with the general literature, the O-protonation step is affected both by the FERMO energies and the O-charges of the carbonyl group. Since the process was shown to not be totally described by either charge- or frontier-orbitals, it is proposed to be frontier-charge-miscere controlled. Moreover, the observed trend for the experimental reaction yields suggests that the electron withdrawing groups favor the reaction and the same was observed for Step 2, which can thus be pointed out as the determining step.

Superoxide radical-mediated photocatalytic oxidation of phenolic compounds over Ag"+/TiO_2: Influence of electron donating and withdrawing substituents

International Nuclear Information System (INIS)

Xiao, Jiadong; Xie, Yongbing; Han, Qingzhen; Cao, Hongbin; Wang, Yujiao; Nawaz, Faheem; Duan, Feng

2016-01-01

Highlights: • A weak EWG benefited photocatalytic oxidation of phenols the most. • Phenolic compounds were dominantly oxidized by ·O_2"−, rather than ·OH, "1O_2 or h"+. • ·O_2"− preferred to nucleophilically attack EDG substituted phenols. • ·O_2"− more likely electrophilically attacked EWG substituted phenols. • ·O_2"− simultaneously nucleophilically and electrophilically assaulted p-chlorophenol. - Abstract: A comparative study was constructed to correlate the electronic property of the substituents with the degradation rates of phenolic compounds and their oxidation pathways under UV with Ag"+/TiO_2 suspensions. It was verified that a weak electron withdrawing substituent benefited photocatalytic oxidation the most, while an adverse impact appeared when a substituent was present with stronger electron donating or withdrawing ability. The addition of p-benzoquinone dramatically blocked the degradation, confirming superoxide radicals (·O_2"−) as the dominant photooxidant, rather than hydroxyl radicals, singlet oxygen or positive holes, which was also independent of the substituent. Hammett relationship was established based on pseudo-first-order reaction kinetics, and it revealed two disparate reaction patterns between ·O_2"− and phenolic compounds, which was further verified by the quantum chemical computation on the frontier molecular orbitals and Mulliken charge distributions of ·O_2"− and phenolic compounds. It was found that electron donating group (EDG) substituted phenols were more likely nucleophilically attacked by ·O_2"−, while ·O_2"− preferred to electrophilically assault electron withdrawing group (EWG) substituted phenols. Exceptionally, electrophilic and nucleophilic attack by ·O_2"− could simultaneously occur in p-chlorophenol degradation, consequently leading to its highest rate constant. Possible reactive positions on the phenolic compounds were also detailedly uncovered.

Multiple electrical phase transitions in Al substituted barium hexaferrite

Science.gov (United States)

Kumar, Sunil; Supriya, Sweety; Kar, Manoranjan

2017-12-01

Barium hexaferrite is known to be a very good ferromagnetic material. However, it shows very good dielectric properties, i.e., the dielectric constant is comparable to that of the ferroelectric material. However, its crystal symmetry does not allow it to be a ferroelectric material. Hence, the electrical properties have revived the considerable research interest on these materials, not only for academic interest, but also for technological applications. There are a few reports on temperature dependent dielectric behavior of these materials. However, the exact cause of dielectric as well as electrical conductivity is yet to be established. Hence, Al (very good conducting material) substituted barium hexaferrite (BaFe12-xAlxO19, x = 0.0-4.0) has been prepared by following the modified sol-gel method to understand the ac and DC electrical properties of these materials. The crystal structure and parameters have been studied by employing the XRD and FTIR techniques. There are two transition temperatures, which have been observed in the temperature dependent ac dielectric and DC resistivity measurement. The response of dielectric behaviors to temperature is similar to that of the ferroelectric material; however, the dielectric polarization is due to the polaron hopping, which is evident from the DC resistivity analysis. Hence, the present observations lead to understand the electrical properties of barium hexaferrite. The frequency dependent dielectric dispersion can be understood by the modified Debye model. More interestingly, the dielectric constant decreases and DC resistivity increases with the increase in the Al concentration, which has the correlation between bond length modifications in the crystal due to substitution.

Bone healing and bone substitutes.

Science.gov (United States)

Costantino, Peter D; Hiltzik, David; Govindaraj, Satish; Moche, Jason

2002-02-01

With the advent of new biomaterials and surgical techniques, the reconstructive surgeon has a wider range of treatment modalities for the rehabilitation and reconstruction of craniofacial skeletal deformities than ever before. These innovative substances act as true bone graft substitutes, thereby allowing the surgeon to avoid the use of autogenous bone grafts and their associated donor site morbidity. Surgeons have long been interested in producing a composite graft that can heal faster by induction, incorporate with surrounding tissues, and be remodeled to resemble native bone. Currently, there are a host of bone graft substitutes available that vary in both their composition and properties. Craniomaxillofacial surgeons must therefore become comfortable with numerous biomaterials to best tailor the treatment for each patient individually. Ongoing investigations into the next phase of tissue engineering will continue to bring us closer to the ability to regenerate or replace bone.

Synthesis, characterization and modelling of zinc and silicate co-substituted hydroxyapatite.

Science.gov (United States)

Friederichs, Robert J; Chappell, Helen F; Shepherd, David V; Best, Serena M

2015-07-06

Experimental chemistry and atomic modelling studies were performed here to investigate a novel ionic co-substitution in hydroxyapatite (HA). Zinc, silicate co-substituted HA (ZnSiHA) remained phase pure after heating to 1100 °C with Zn and Si amounts of 0.6 wt% and 1.2 wt%, respectively. Unique lattice expansions in ZnSiHA, silicate Fourier transform infrared peaks and changes to the hydroxyl IR stretching region suggested Zn and silicate co-substitution in ZnSiHA. Zn and silicate insertion into HA was modelled using density functional theory (DFT). Different scenarios were considered where Zn substituted for different calcium sites or at a 2b site along the c-axis, which was suspected in singly substituted ZnHA. The most energetically favourable site in ZnSiHA was Zn positioned at a previously unreported interstitial site just off the c-axis near a silicate tetrahedron sitting on a phosphate site. A combination of experimental chemistry and DFT modelling provided insight into these complex co-substituted calcium phosphates that could find biomedical application as a synthetic bone mineral substitute. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Synthesis, characterization and modelling of zinc and silicate co-substituted hydroxyapatite

Science.gov (United States)

Friederichs, Robert J.; Chappell, Helen F.; Shepherd, David V.; Best, Serena M.

2015-01-01

Experimental chemistry and atomic modelling studies were performed here to investigate a novel ionic co-substitution in hydroxyapatite (HA). Zinc, silicate co-substituted HA (ZnSiHA) remained phase pure after heating to 1100°C with Zn and Si amounts of 0.6 wt% and 1.2 wt%, respectively. Unique lattice expansions in ZnSiHA, silicate Fourier transform infrared peaks and changes to the hydroxyl IR stretching region suggested Zn and silicate co-substitution in ZnSiHA. Zn and silicate insertion into HA was modelled using density functional theory (DFT). Different scenarios were considered where Zn substituted for different calcium sites or at a 2b site along the c-axis, which was suspected in singly substituted ZnHA. The most energetically favourable site in ZnSiHA was Zn positioned at a previously unreported interstitial site just off the c-axis near a silicate tetrahedron sitting on a phosphate site. A combination of experimental chemistry and DFT modelling provided insight into these complex co-substituted calcium phosphates that could find biomedical application as a synthetic bone mineral substitute. PMID:26040597

Non-isovalent alkali metal ''substitution'' in YBa2Cu3O7-y granular ceramics

International Nuclear Information System (INIS)

Cloots, R.; Liege Univ.; Rulmont, A.; Pekala, M.; Liege Univ.; Laval, J.Y.; Bougrine, H.; Liege Univ.; Ausloos, M.

1995-01-01

The aim of this paper is to study the influence of non-isovalent ''doping'' in YBa 2 Cu 3 O 7-y in particular on its synthesis conditions and on the resistive properties both with and without a magnetic field. We concentrate on the study of possible alkali ions (Na, K, Cs) ''substitution'' at the barium sites. A low temperature sintering process is used in order to induce a reactive liquid phase. The final chemical composition is discussed as a function of the amount of the liquid phase. No alkali ion is substituted. Carbonate layers are present. However, this (lack of) ''substitution'' leads to induced vacancies and improved electrical transport properties which are as good as in highly pure materials. For conciseness the case of Na ''substitution'' only is illustrated. The use of such data in order to probe the microstructure is emphasized. (orig.)

Effects of Gd substitution on the structural and magnetic properties of strontium hexaferrites

Science.gov (United States)

Litsardakis, G.; Manolakis, I.; Serletis, C.; Efthimiadis, K. G.

2007-09-01

The effect of Gd substitution in M-type strontium hexaferrites has been examined in two series of samples, (Sr1-xGdx)O·5.25Fe2O3 and Sr1-xGdxFe12-xCoxO19, both prepared by the ceramic method, where x=0-0.40. The samples have been characterized by XRD, VSM and SEM-EDAX techniques. All substituted samples present primarily the hexaferrite structure. Sample (Sr0.95Gd)O·5.25Fe2O3 is single phase. Formation of impurity phases is affected by stoichiometry and presence of Co. In Sr-Gd samples, coercivity showed a maximum value of 305 kA/m (3.8 kOe) for x=0.20, while remanence and saturation magnetization did not decrease. Coercivity and magnetization in the Sr-Gd-Co series decreased steadily with substitution degree.

Sm/Ti co-substituted bismuth ferrite multiferroics: reciprocity between tetragonality and piezoelectricity.

Science.gov (United States)

Jha, Pardeep K; Jha, Priyanka A; Singh, Prabhakar; Ranjan, Rajeev; Dwivedi, R K

2017-10-04

BiFeO 3 (BFO) systems co-modified with Ti, Sm and Sm-Ti have been investigated for piezoelectricity together with dielectric and multiferroic properties. Structural studies revealed the coexistence of orthorhombic and rhombohedral (R3c) phases for x > 0.12. Impurity phases were shown to have hardly any effect on the remanent magnetization, which rather depends on the Fe-O-Fe bond angle. The dielectric loss was reduced considerably by substitution. A correlation between the piezoelectric coefficient and tetragonality was observed in these samples. BFO co-substituted with Sm-Ti exhibited a high piezoelectric coefficient with better ferroic properties, which revealed a unique combination of green piezoelectricity and multiferroicity.

Syntheses and biological activities of 13-substituted avermectin aglycons.

Science.gov (United States)

Mrozik, H; Linn, B O; Eskola, P; Lusi, A; Matzuk, A; Preiser, F A; Ostlind, D A; Schaeffer, J M; Fisher, M H

1989-02-01

The reactions of sulfonate esters of the allylic/homoallylic 13-alcohol of 5-O-(tert-butyldimethylsilyl)-22,23-dihydroavermectin B1a aglycon (1a) were investigated. Nucleophilic substitution gave 13 beta-chloro and 13 beta-iodo derivatives, while solvolytic reaction conditions yielded 13 alpha-methoxy, 13 alpha-fluoro, and 13 alpha-chloro products. A mixture of 13 alpha- and 13 beta-fluorides was obtained upon reaction with DAST. The 13 beta-iodide gave, upon elimination with lutidine, the 8(9),10(11),12(13),14(15)-tetraene. The 13 beta-alcohol and the rearranged 15-ol 13(14)-ene and 15-amino 13(14)-ene derivatives were obtained by substitution via the allylic carbonium ion. MEM ethers 11 and 12 of the two epimeric 13-ols were prepared by alkylation with MEM chloride. In contrast, methylation of 1a with MeI and Ag2O in CH2Cl2 occurred exclusively at the tertiary 7-hydroxy group and not at the secondary 13 alpha-ol. Oxidation of the allylic alcohol 1a proceeded under Swern conditions but not with MnO2 to the 13-oxo aglycon, which was reduced by NaBH4 exclusively to the natural 13 alpha-ol, while reductive amination with NaCNBH3-NH4OAc gave the 13 alpha-amine. The methoxime derivative was obtained in the form of the two geometric isomers. Anthelmintic activities against the sheep nematode Trichostrongylus colubriformis, miticidal activities against the two-spotted spider mite (Tetranychus urticae), and insecticidal activities against the southern armyworm (Spodoptera eridania) as well as the binding constants to a free living nematode (Caenorhabditis elegans) derived receptor assay were obtained and compared to avermectin B1a, 22,23-dihydroavermectin B1a, and the 13-deoxy-22,23-dihydroavermectin B1 aglycon related to the milbemycins. None of the newly prepared derivatives exceeded the potency of the three reference compounds. Lipophilic 13-substituents such as halogen, alkoxy, and methoxime retained high biological activities in all assays, while the more polar

Analytical Enantioseparation of β-Substituted-2-Phenylpropionic Acids by High-Performance Liquid Chromatography with Hydroxypropyl-β-Cyclodextrin as Chiral Mobile Phase Additive.

Science.gov (United States)

Tong, Shengqiang; Zhang, Hu; Yan, Jizhong

2016-04-01

Analytical enantioseparation of five β-substituted-2-phenylpropionic acids by high-performance liquid chromatography with hydroxypropyl-β-cyclodextrin (HP-β-CD) as chiral mobile phase additive was established in this paper, and chromatographic retention mechanism was studied. The effects of various factors such as the organic modifier, different ODS C18 columns and concentration of HP-β-CD were investigated. The chiral mobile phase was composed of methanol or acetonitrile and 0.5% triethylamine acetate buffer at pH 3.0 added with 25 mmol L(-1) of HP-β-CD, and baseline separations could be reached for all racemates. As for chromatographic retention mechanism, it was found that there was a negative correlation between the concentration of HP-β-CD in mobile phase and the retention factor under constant pH value and column temperature. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Effects of site substitution and metal ion addition on doped manganites

CERN Document Server

Pradhan, A K; Roul, B K; Sahu, D R; Muralidhar, M

2002-01-01

We report transport, magnetization and transmission electron microscopy studies of the effects of A-and B-site substitution, and the addition of metal ions such as Pt, Ag and Sr, on doped ABO sub 3 perovskites, where A = La, Pr etc and B = Mn. Disorder induced by such substitution changes the behaviour of the charge-ordered (CO) state significantly. A-and B-site substitution suppresses the CO phase due to size mismatch and disorder produced by inhomogeneity. On the other hand, addition of metal ions such as Pt and Ag improves several colossal-magnetoresistance properties significantly due to microstructural effects and enhanced current percolation through grain boundaries.

Synthesis and molecular structures of 1-hydroxyethyl-2-(p-substituted) phenoxymethyl benzimidazoles

International Nuclear Information System (INIS)

Wu, J.W.; Zhao, L.; Wang, Z.; Gu, H.; Chen, W.; Zhao, C.

2016-01-01

Five novel 1-hydroxyethyl-2-(p-substituted) phenoxymethyl benzimidazoles were synthesized by a three-step route. Under microwave irradiation, the p-substituted phenols were firstly O-carboxymethylated to prepare the corresponding p-substituted phenoxymethyl acids, which then reacted with o-phenylendiamine to get the key intermediates 2-(p-substituted) phenoxymethyl benzimidazole. Finally, the solid-liquid phase transfer catalysis method, where tetrabutyl ammonium bromide (TBAB) was used as the catalyst, was applied to synthesize the target compounds c/sub 1/-c/sub 5/ by the N-hydroxyethylation reaction with 2-chloroethyl alcohol. The structures of the obtained compounds were well characterized and confirmed by elemental analysis, MS, IR, /sup 1/H NMR, /sup 13/C NMR and single-crystal X-ray diffraction analysis. (author)

Influence of La3+ Substitution on Structure, Morphology and Magnetic Properties of Nanocrystalline Ni-Zn Ferrite.

Directory of Open Access Journals (Sweden)

Y K Dasan

Full Text Available Lanthanum substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5LaxFe1-xO4; 0.00 ≤x≤ 1.00 synthesized by sol-gel method were presented. X-ray diffraction patterns reveal the typical single phase spinel cubic ferrite structure, with the traces of secondary phase for lanthanum substituted nanocrystals. In addition, the structural analysis also demonstrates that the average crystallite size varied in the range of 21-25 nm. FTIR spectra present the two prominent absorption bands in the range of 400 to 600 cm-1 which are the fingerprint region of all ferrites. Surface morphology of both substituted and unsubstituted Ni-Zn ferrite nanoparticle samples was studied using FESEM technique and it indicates a significant increase in the size of spherical shaped particles with La3+ substitution. Magnetic properties of all samples were analyzed using vibrating sample magnetometer (VSM. The results revealed that saturation magnetization (Ms and coercivity (Hc of La3+ substituted samples has decreased as compared to the Ni-Zn ferrite samples. Hence, the observed results affirm that the lanthanum ion substitution has greatly influenced the structural, morphology and magnetic properties of Ni-Zn ferrite nanoparticles.

Improving the yield of 2-[18F]fluoro-2-deoxyglucose using a microwave cavity.

Science.gov (United States)

Taylor, M D; Roberts, A D; Nickles, R J

1996-07-01

We have investigated the use of a microwave cavity (Labwell AB, Sweden) to improve the radiochemical yield of 2-[18F]fluoro-2-deoxyglucose (2-[18F]FDG). After characterizing the heating properties of the cavity, three steps of the Hamacher 2-[18F]FDG synthesis which require heating--azeotropic distillation of the target water, nucleophilic substitution, and hydrolysis of the product--were investigated separately. The average radiochemical yield of 2-[18F]FDG for the microwave synthesis, using the phase transfer reagent tetrabutylammonium bicarbonate, was 62 +/- 4% (72 +/- 5%, decay corrected, synthesis time = 31 min).

Improving the yield of 2-[18F]fluoro-2-deoxyglucose using a microwave cavity

International Nuclear Information System (INIS)

Taylor, M.D.; Roberts, A.D.; Nickles, R.J.

1996-01-01

We have investigated the use of a microwave cavity (Labwell AB, Sweden) to improve the radiochemical yield of 2-[ 18 F]fluoro-2-deoxyglucose (2-[ 18 F]FDG). After characterizing the heating properties of the cavity, three steps of the Hamacher 2-[ 18 F]FDG synthesis which require heating--azeotropic distillation of the target water, nucleophilic substitution, and hydrolysis of the product--were investigated separately. The average radiochemical yield of 2-[ 18 F]FDG for the microwave synthesis, using the phase transfer reagent tetrabutylammonium bicarbonate, was 62 ± 4% (72 ± 5%, decay corrected, synthesis time = 31 min)

Regio- and stereoselective 1,2-dihydropyridine alkylation/addition sequence for the synthesis of piperidines with quaternary centers.

Science.gov (United States)

Duttwyler, Simon; Chen, Shuming; Lu, Colin; Mercado, Brandon Q; Bergman, Robert G; Ellman, Jonathan A

2014-04-07

The first example of C alkylation of 1,2-dihydropyridines with alkyl triflates and Michael acceptors was developed to introduce quaternary carbon centers with high regio- and diastereoselectivity. Hydride or carbon nucleophile addition to the resultant iminium ion also proceeded with high diastereoselectivity. Carbon nucleophile addition results in an unprecedented level of substitution to provide piperidine rings with adjacent tetrasubstituted carbon atoms. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis, characterization and structural refinement of polycrystalline uranium substituted zirconolite

International Nuclear Information System (INIS)

Shrivastava, O.P.; Narendra Kumar; Sharma, I.B.

2005-01-01

Ceramic precursors of Zirconolite (CaZrTi 2 O 7 ) family have a remarkable property of substitution Zr 4+ cationic sites. This makes them potential material for nuclear waste management in 'synroc' technology. In order to simulate the mechanism of partial substitution of zirconium by tetravalent actinides, a solid phase of composition CaZr 0.95 U 0.5 Ti 2 O 7 has been synthesized through ceramic route by taking calculated quantities of oxides of Ca, Ti and nitrates of uranium and zirconium respectively. Solid state synthesis has been carried out by repeated pelletizing and sintering the finely powdered oxide mixture in a muffle furnace at 1050 degC. The polycrystalline solid phase has been characterized by its typical powder diffraction pattern. Step analysis data has been used for ab initio calculation of structural parameters. The uranium substituted zirconolite crystallizes in monoclinic symmetry with space group C2/c (15). The following unit cell parameters have been calculated: a =12.4883(15), b =7.2448(5), c 11.3973(10) and β = 100.615(9)0. The structure was refined to satisfactory completion. The Rp and Rwp are found to be 7.48% and 9.74% respectively. (author)

Solid-phase Synthesis of Combinatorial 2,4-Disubstituted-1,3,5-Triazine via Amine Nucleophilic Reaction

Energy Technology Data Exchange (ETDEWEB)

Moon, Sung Won [KIST Gangneung Institute, Gangneung (Korea, Republic of); Ham, Jungyeob [Gangneung-Wonju National University, Gangneung (Korea, Republic of); Chang, Young-Tae [National University of Singapore, Singapore (Singapore); Lee, Jae Wook [University of Science and Technology, Daejon (Korea, Republic of)

2015-01-15

In combinatorial chemistry, solid-phase synthesis is a popular approach formass production of small molecules. Compared to solution-phase synthesis, it is easy to prepare and purify a large number of heterocyclic small molecules via solid-phase chemistry; the overall reaction time is decreased as well. 1,3,5-Triazine is a nitrogen-containing heterocyclic aromatic scaffold that was shown to be a druggable scaffold in recent studies. These structures have been reported as anticancer, antimicrobial, and antiretroviral compounds, as CDKs and p38 MAP kinase inhibitors, as estrogen receptor modulators, and as inosine monophosphate dehydrogenase inhibitors. we designed and synthesized disubstituted triazine compounds as an analog of disubstituted pyrimidine compounds. These disubstituted triazine compounds possess a linear structure which may have biological activity similar to that of disubstituted pyrimidine. Here we report the solid-phase synthesis of disubstituted triazine compounds.

Solid-phase Synthesis of Combinatorial 2,4-Disubstituted-1,3,5-Triazine via Amine Nucleophilic Reaction

International Nuclear Information System (INIS)

Moon, Sung Won; Ham, Jungyeob; Chang, Young-Tae; Lee, Jae Wook

2015-01-01

In combinatorial chemistry, solid-phase synthesis is a popular approach formass production of small molecules. Compared to solution-phase synthesis, it is easy to prepare and purify a large number of heterocyclic small molecules via solid-phase chemistry; the overall reaction time is decreased as well. 1,3,5-Triazine is a nitrogen-containing heterocyclic aromatic scaffold that was shown to be a druggable scaffold in recent studies. These structures have been reported as anticancer, antimicrobial, and antiretroviral compounds, as CDKs and p38 MAP kinase inhibitors, as estrogen receptor modulators, and as inosine monophosphate dehydrogenase inhibitors. we designed and synthesized disubstituted triazine compounds as an analog of disubstituted pyrimidine compounds. These disubstituted triazine compounds possess a linear structure which may have biological activity similar to that of disubstituted pyrimidine. Here we report the solid-phase synthesis of disubstituted triazine compounds

SHORT COMMUNICATION SYNTHESIS OF AZIDO DERIVATIVES ...

African Journals Online (AJOL)

Preferred Customer

Department of Chemistry & Chemical Technology, Faculty of Science, Engineering & ... substitution reactions with various nucleophiles, including azides and ... readily available substrate for the synthesis of an array of chemical compounds.

Tuning the mesomorphic properties of phenoxy-terminated smectic liquid crystals: the effect of fluoro substitution.

Science.gov (United States)

Thompson, Matthew; Carkner, Carolyn; Mosey, Nicholas J; Kapernaum, Nadia; Lemieux, Robert P

2015-05-21

The mesomorphic properties of phenoxy-terminated 5-alkoxy-2-(4-alkoxyphenyl)pyrimidine liquid crystals can be tuned in a predictable fashion with fluoro substituents on the phenoxy end-group. We show that an ortho-fluoro substituent promotes the formation of a tilted smectic C (SmC) phase whereas a para-fluoro substituent promotes the formation of an orthogonal smectic A (SmA) phase. The balance between SmA and SmC phases may be understood in terms of the energetic preference of the phenoxy end-groups to self-assemble via arene-arene interactions in a parallel or antiparallel geometry, and how these non-covalent interactions may cause either a suppression or enhancement of out-of-layer fluctuations at the interface of smectic layers. Calculations of changes in the potential energy of association ΔE for non-covalent dimers of fluoro-substituted n-butyloxybenzene molecules in parallel and antiparallel geometries support this hypothesis. We also show how mesomorphic properties can be further tuned by difluoro and perfluoro substitution, including difluoro substitution at the ortho positions, which uniquely promotes the formation of a SmC-nematic phase sequence.

Calculated site substitution in ternary gamma'-Ni3Al: Temperature and composition effects

DEFF Research Database (Denmark)

Ruban, Andrei; Skriver, Hans Lomholt

1997-01-01

-tin orbitals method in conjunction with the local-density and multisublattice coherent-potential approximations and include all 3d, 4d, 5d, and noble metals. The calculations show the existence of simple trends in the alloying behavior of the gamma' phase which may be explained in a Friedel-like model based...... on the interaction between Ni and the added species. It is shown that the commonly accepted interpretation of the site substitution behavior of Cu and Pd may be incorrect because of site substitution reversal at high temperatures. It is further shown that the direction of the solubility lobe in the ternary phase...

Effect of rare earth substitution on properties of barium strontium titanate ceramic and its multiferroic composite with nickel cobalt ferrite

International Nuclear Information System (INIS)

Pahuja, Poonam; Kotnala, R.K.; Tandon, R.P.

2014-01-01

Highlights: • Rare earth ions Dy 3+ , Gd 3+ and Sm 3+ have been substituted in Ba 0.95 Sr 0.05 TiO 3 (BST). • Ni 0.8 Co 0.2 Fe 2 O 4 has been used as ferrimagnetic phase to obtain composites. • Substitution of these ions increases dielectric constant of BST and composites. • Magnetoelectric coefficient of composites increases on substitution of these ions. - Abstract: Effect of substitution of rare earth ions (Dy 3+ , Gd 3+ and Sm 3+ ) on various properties of Ba 0.95 Sr 0.05 TiO 3 (BST) i.e. the composition Ba 0.95−1.5x Sr 0.05 R x TiO 3 (where x = 0.00, 0.01, 0.02, 0.03 and R are rare earths Dy, Gd, Sm) and that of their multiferroic composite with Ni 0.8 Co 0.2 Fe 2 O 4 (NCF) has been studied. Shifting of peaks corresponding to different compositions in the X-ray diffraction pattern confirmed the substitution of rare earth ions at both Ba 2+ and Ti 4+ sites in BST. It is clear from scanning electron microscopy (SEM) images that rare earth substitution in BST increases its grain size in both pure and composite samples. Substitution of rare earth ions results in increase in value of dielectric constant of pure and composite samples. Sm substitution in BST significantly decreases its Curie temperature. Dy substituted pure and composite samples possess superior ferroelectric properties as confirmed by polarization vs electric field (P–E) loops. Composite samples containing Dy, Gd and Sm substituted BST as ferroelectric phase possess lower values of remanent and saturation magnetizations in comparison to composite sample containing pure BST as ferroelectric phase (BSTC). Rare earth substituted composite samples possess higher value of magnetoelectric coefficient as compared to that for BSTC

18F fluorination using macrocyclic polyethers

International Nuclear Information System (INIS)

Klatte, B.; Knoechel, A.

The aim of this work is the nucleophilic substitution labelling with 18 F with high selectivity and yield for a short reaction time. Labelling with little or no carrier presumes that 18 F is obtained in anhydrons form. Starting with the production via the nuclear reaction 20 Ne(d,α) 18 F, the 18 F formed is to be continuously converted into an alkali polyether complex whose purpose is to increase the reactivity of the fluoride (compared to the non-complexed anion form), so that nucleophilic substitution reactions can be carried out faster and more carefully. A report is given on the working program and on first results to optimize the carrier-poor synthesis with polyethers as synthesis agent. (RB) [de

Simple, heart-smart substitutions

Science.gov (United States)

Coronary artery disease - heart smart substitutions; Atherosclerosis - heart smart substitutions; Cholesterol - heart smart substitutions; Coronary heart disease - heart smart substitutions; Healthy diet - heart ...

Nucleophile-directed selectivity towards linear carbonates in the niobium pentaethoxide-catalysed cycloaddition of CO2 and propylene oxide

KAUST Repository

Dutta, Barnali

2014-01-01

Homoleptic Nb-complexes combined with selected organic nucleophiles generate very active catalytic systems for the cycloaddition of propylene oxide and CO2 under ambient conditions. An unprecedented reaction pathway towards an acyclic organic carbonate is observed when extending the study to [Nb(OEt)5] in combination with 4-dimethylamino-pyridine (DMAP) or tetra-n-butylammonium bromide (TBAB). Mechanistic insights of the reaction are provided based on experimental and spectroscopic evidences. This journal is © the Partner Organisations 2014.

Effects of Gd substitution on the structural and magnetic properties of strontium hexaferrites

Energy Technology Data Exchange (ETDEWEB)

Litsardakis, G. [Department of Electrical and Computer Engineering, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece)]. E-mail: Lits@eng.auth.gr; Manolakis, I. [Department of Electrical and Computer Engineering, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece); Serletis, C. [Department of Physics, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece); Efthimiadis, K.G. [Department of Physics, Aristotle University of Thessaloniki, Thessaloniki 54124 (Greece)

2007-09-15

The effect of Gd substitution in M-type strontium hexaferrites has been examined in two series of samples, (Sr{sub 1-x}Gd{sub x})O.5.25Fe{sub 2}O{sub 3} and Sr{sub 1-x}Gd{sub x}Fe{sub 12-x}Co{sub x}O{sub 19}, both prepared by the ceramic method, where x=0-0.40. The samples have been characterized by XRD, VSM and SEM-EDAX techniques. All substituted samples present primarily the hexaferrite structure. Sample (Sr{sub 0.95}Gd{sub x0.05})O.5.25Fe{sub 2}O{sub 3} is single phase. Formation of impurity phases is affected by stoichiometry and presence of Co. In Sr-Gd samples, coercivity showed a maximum value of 305kA/m (3.8kOe) for x=0.20, while remanence and saturation magnetization did not decrease. Coercivity and magnetization in the Sr-Gd-Co series decreased steadily with substitution degree.

Presidential Green Chemistry Challenge: 1998 Greener Synthetic Pathways Award

Science.gov (United States)

Presidential Green Chemistry Challenge 1998 award winner, Flexsys America, developed nucleophilic aromatic substitution for hydrogen to eliminate waste from a common reaction and to produce 4-ADPA, a high-volume chemical.

Optimized thermoelectric performance of the n-type half-Heusler material TiNiSn by substitution and addition of Mn

Directory of Open Access Journals (Sweden)

Enkhtaivan Lkhagvasuren

2017-04-01

Full Text Available Alloys based on the half-Heusler compound TiNiSn with the addition of Mn or with a substitution of Ti by Mn are investigated as high-temperature thermoelectric materials. In both materials an intrinsic phase separation is observed, similar to TiNiSn where Ti has been partially substituted by Hf, with increasing Mn concentration the phase separation drastically reduces the lattice thermal conductivity while the power factor is increased. The thermoelectric performance of the n-type conducting alloy can be optimized both by substitution of Ti by Mn as well as the addition of Mn.

Chemical synthesis and characterization of magnesium substituted amorphous calcium phosphate (MG-ACP)

Energy Technology Data Exchange (ETDEWEB)

Lee, Donghyun [Department of Biomedical Engineering, Chung-Ang University, 221 Heukseok-Dong, Dongjak-Gu, Seoul 156-756 (Korea, Republic of); Kumta, Prashant N., E-mail: pkumta@pitt.edu [Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Department of Mechanical Engineering and Materials Sceince, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15260 (United States)

2010-10-12

Amorphous calcium phosphate (ACP) was synthesized by a simple aqueous precipitation using CaCl{sub 2} and Na{sub 3}PO{sub 4} in the presence of MgCl{sub 2} to ensure the formation of the ACP phase at room temperature. Magnesium substituted ACP phases corresponding to two different compositions representing the two most prominent calcium phosphate phases (hydroxyapatite: Ca + Mg/P = 1.67 and tricalcium phosphate: Ca + Mg/P = 1.5) were synthesized by this simple approach. Both compositions of ACP phases resulted in their transformation into {beta}-tricalcium phosphate upon heat treatment in air at 600 deg. C. X-ray diffraction (XRD), heat treatment, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) and Brunauer-Emmett-Teller (BET) analyses were used to characterize the phase, thermal stability, surface area, and morphology of the synthesized ACP powders corresponding to the two different nominal Ca/P compositions. Although it is known that {alpha}-TCP is the phase that appears upon heat treatment at 600 deg. C unsubstituted ACP, substitution of magnesium ion in ACP (both TCP and HA composition) stabilized the structure of {beta}-TCMP phase at 600 deg. C. Moreover, FT-IR analysis revealed that the ACP phase regardless of the composition, exhibited characteristic bands corresponding to that of HA, with the exception of the ACP corresponding to HA composition which exhibited a prominent OH vibrational mode.

Analysis of the active site mechanism of Tyrosyl-DNA phosphodiesterase I: a member of the phospholipase D superfamily

Science.gov (United States)

Gajewski, Stefan; Comeaux, Evan Q.; Jafari, Nauzanene; Bharatham, Nagakumar; Bashford, Donald; White, Stephen W.; van Waardenburg, Robert C.A.M.

2011-01-01

Tyrosyl DNA phosphodiesterase I (Tdp1) is a member of the phospholipase D superfamily and hydrolyzes 3′phospho-DNA adducts via two conserved catalytic histidines, one acting as the lead nucleophile and the second as a general acid/base. Substitution of the second histidine specifically to arginine contributes to the neurodegenerative disease SCAN1. We investigated the catalytic role of this histidine in the yeast protein (His432) using a combination of X-ray crystallography, biochemistry, yeast genetics and theoretical chemistry. The structures of wild type Tdp1 and His432Arg both show a phosphorylated form of the nucleophilic histidine that is not observed in the structure of His432Asn. The phosphohistidine is stabilized in the His432Arg structure by the guanidinium group that also restricts access of a nucleophilic water molecule to the Tdp1-DNA intermediate. Biochemical analyses confirm that His432Arg forms an observable and unique Tdp1-DNA adduct during catalysis. Substitution of His432 by Lys does not affect catalytic activity or yeast phenotype, but substitution with Asn, Gln, Leu, Ala, Ser and Thr all result in severely compromised enzymes and Top1-camptothecin dependent lethality. Surprisingly, His432Asn did not show a stable covalent Tdp1-DNA intermediate which suggests another catalytic defect. Theoretical calculations revealed that the defect resides in the nucleophilic histidine and that the pKa of this histidine is crucially dependent upon the second histidine and the incoming phosphate of the substrate. This represents a unique example of substrate-activated catalysis that applies to the entire phospholipase D superfamily. PMID:22155078

The magnetic properties of strontium hexaferrites with La-Cu substitution prepared by SHS method

International Nuclear Information System (INIS)

Qiao Liang; You Lishun; Zheng Jingwu; Jiang Liqiang; Sheng Jiawei

2007-01-01

La-Cu substituted strontium hexaferrites with the chemical composition of Sr 1- x La x Fe 12- x Cu x O 19 were prepared by self-propagating high-temperature synthesis. The effects of La-Cu substitution on the microstructure and magnetic properties of Sr-ferrites were studied. The XRD results show that all the samples are single SrM-type phase for x 1- x La x Fe 12- x Cu x O 19 are remarkably improved for x 2+ by La 3+ in the Sr-layer makes the Cu 2+ preferably substitutes the Fe 3+ in 4f 2 sites is predicted to be associated with the improvement of the magnetic properties of La-Cu substituted samples

Low-energy excitations in impurity substituted CuGeO3

International Nuclear Information System (INIS)

Jones, B. R.; Sushkov, A. B.; Musfeldt, J. L.; Wang, Y. J.; Revcolevschi, A.; Dhalenne, G.

2001-01-01

We report far-infrared reflectance measurements of Zn- and Si-doped CuGeO 3 single crystals as a function of applied magnetic field at low temperature. Overall, the low-energy far-infrared spectra are extraordinarily sensitive to the various phase boundaries in the H-T diagram, with the features being especially rich in the low-temperature dimerized state. Zn impurity substitution rapidly collapses the 44 cm -1 zone-boundary spin Peierls gap, although broadened magnetic excitations are observed at the lightest doping level (0.2%) and a remnant is still observable at 0.7% substitution. In a 0.7% Si-doped sample, there is no evidence of the spin gap. Impurity substitution effects on the intensity of the 98 cm -1 zone-folding mode are striking as well. The lightly doped Zn crystals display an enhanced response, and even at intermediate doping levels, the mode intensity is larger than that in the pristine material. The Si-doped sample also displays an increased intensity of the 98 cm -1 mode in the spin Peierls phase relative to the pure material. The observed trends are discussed in terms of the effect of disorder on the spin gap and 98 cm -1 mode, local oscillator strength sum rules, and broken selection rules

Vibrational Spectra of Discrete UO22+ Halide Complexes in the Gas Phase

International Nuclear Information System (INIS)

Groenewold, G.S.; Van Stipdonk, Michael J.; Oomens, Jos; De Jong, Wibe A.; Gresham, Garold L.; Mcilwain, Michael

2010-01-01

The intrinsic binding of halide ions to the metal center in the uranyl molecule is a topic of ongoing research interest in both the actinide separations and theoretical communities. Investigations of structure in the condensed phases is frequently obfuscated by solvent interactions that can alter ligand binding and spectroscopic properties. The approach taken in this study is to move the uranyl halide complexes into the gas phase where they are free from solvent interactions, and then interrogate their vibrational spectroscopy using infrared multiple photon dissociation (IRMPD). The spectra of cationic coordination complexes having the composition (UO 2 (X)(ACO) 3 ) + (where X = F, Cl, Br and I; ACO = acetone) were acquired using electrospray for ion formation, and monitoring the ion signal from the photoelimination of ACO ligands. The studies showed that the asymmetric ν 3 UO 2 frequency was insensitive to halide identity as X was varied from Cl to I, suggesting that in these pseudo-octahedral complexes, changing the nucleophilicity of the halide did not appreciably alter its binding in the complex. The ν 3 peak in the spectrum of the F-containing complex was 9 cm -1 lower indicating stronger coordination in this complex. Similarly the ACO carbonyl stretches showed that the C=O frequency was relatively insensitive to the identity of the halide, although a modest shift to higher wavenumber was seen for the complexes with the more nucleophilic anions, consistent with the idea that they loosen solvent binding. Surprisingly, the ν 1 stretch was activated when the softer anions Cl, Br and I were present in the complexes. IR studies of the anionic complexes (UO 2 X 3 ) - (where X = Cl - , Br - and I - ) compared the ν 3 UO 2 modes versus halide, and showed that the ν 3 values decreased with increasing anion nucleophilicity. This observation was consistent with DFT calculations that indicated that (UO 2 X 2 ) - -X, and (UO 2 X 2 )·-X - dissociation energies

Study of Ti4+ substitution in ZrW2O8 negative thermal expansion materials

International Nuclear Information System (INIS)

Buysser, Klaartje de; Driessche, Isabel van; Putte, Bart van de; Schaubroeck, Joseph; Hoste, Serge

2007-01-01

Powder XRD-analysis and thermo-mechanical analysis on sintered TiO 2 -WO 3 -ZrO 2 mixtures revealed the formation of Zr 1-x Ti x W 2 O 8 solid solutions. A noticeable decrease in unit cell parameter 'a' and in the order-disorder transition temperature could be seen in the case of Zr 1-x Ti x W 2 O 8 solid solutions. Studies performed on other ZrW 2 O 8 solid solutions have attributed an increase in phase transition temperature to a decrease in free lattice volume, whereas a decrease in phase transition temperature was suggested to be due to the presence of a more disordered state. Our studies indicate that the phase transition temperature in our materials is strongly influenced by the bond dissociation energy of the substituting ion-oxygen bond. A decrease in bond strength may compensate for the effect of a decrease in lattice free volume, lowering the phase transition temperature as the degree of substitution by Ti 4+ increases. This hypothesis is proved by differential scanning calorimetry. - Graphical abstract: This study indicates that the phase transition temperature in our materials Zr 1-x Ti x W 2 O 8 is strongly influenced by the bond dissociation energy of the substituting ion-oxygen bond. A decrease in bond strength may compensate for the effect of a decrease in lattice-free volume, lowering the phase transition temperature

Cation-substituted spinel oxide and oxyfluoride cathodes for lithium ion batteries

Science.gov (United States)

Manthiram, Arumugam; Choi, Wonchang

2010-05-18

The present invention includes compositions and methods of making cation-substituted and fluorine-substituted spinel cathode compositions by firing a LiMn2-y-zLiyMzO4 oxide with NH4HF2 at low temperatures of between about 300 and 700.degree. C. for 2 to 8 hours and a .eta. of more than 0 and less than about 0.50, mixed two-phase compositions consisting of a spinel cathode and a layered oxide cathode, and coupling them with unmodified or surface modified graphite anodes in lithium ion cells.

Nucleophilic addition to olefins. 7. Kinetic deuterium isotope effects as criterion for an enforced preassociation mechanism in the hydrolysis of substituted benzylidene Meldrum's acids

International Nuclear Information System (INIS)

Bernasconi, C.F.; Leonarduzzi, G.D.

1982-01-01

The hydrolysis of the title compounds occurs in four steps: (1) nucleophilic attack by water or hydroxide ion to form the addition complex T/sub OH/ - ; (2) carbon protonation of T/sub OH/ - to form T/sub OH/ 0 ; (3) oxygen deprotonation of T/sub OH/ 0 to form T/sub OH/ 0 - ; (4) collapse of the tetrahedral intermediate T/sub OH/ - into the respective benzaldehyde and Meldrum's acid anion. There is also a water-catalyzed collapse of T/sub OH/ 0 which becomes dominant in strongly acidic solution. In basic solution carbon protonation of T/sub OH/ - (step 2) is rate limiting; in strongly acidic media the water-catalyzed collapse of T/sub OH/ 0 is rate limiting for all substrates. In moderatly acidic solution two types of behavior were observed. With the p-nitro derivative step 4 is rate limiting at high, step 3 at low buffer concentrations. The latter situation is equivalent to a diffusion-controlled trapping mechanism in the reverse direction. With the parent and the p-methoxy derivative, collapse of T/sub OH/ 0 - occurs before the protonated base catalyst generated in step 3 can diffuse away; this is equivalent to an enforced preassociation mechanism in the reverse direction and is analogous to the reaction of thiol anions with acetaldehyde studied by Gilbert and Jencks. Our interpretation is strongly supported by (1) α secondary kinetic deuterium isotope effects which are large for the preassociation mechanism but essentially nil for the trapping mechanism and (2) by Bronsted #betta# values around 0.8 in the case of the preassociation mechanism and 1.0 for the trapping mechanism. The mechanism for the water-catalyzed collapse of T/sub OH/ 0 - is probably concerted, a conclusion which is supported by a large positive deviation from the Bronsted plot for base catalysis and by a large α secondary kinetic deuterium isotope effect

High density Gd-substituted yttrium iron garnets by coprecipitation

International Nuclear Information System (INIS)

Lamastra, Francesca Romana; Bianco, Alessandra; Leonardi, Federica; Montesperelli, Giampiero; Nanni, Francesca; Gusmano, Gualtiero

2008-01-01

Gadolinium-substituted yttrium iron garnets are ferrite materials of primary importance in microwave engineering. Stoichiometric powders of nominal composition Y 2.6 Gd 0.4 Fe 5 O 12 (i.e. Fe/(Y + Gd) = 1.67) were prepared by reverse strike coprecipitation of metal nitrates. In order to investigate the influence of composition on phase formation, non-stoichiometric powders were also synthesised. On the basis of DTA/TGA analysis, dried coprecipitates were calcined between 600 deg. C and 1200 deg. C and then characterised by ICP, XRD and HT-XRD. Amorphous coprecipitates crystallise around 700 deg. C in cubic garnet phase along with small amounts of YFeO 3 and/or α-Fe 2 O 3 . Only iron-rich garnets, either pure or Gd-substituted, calcined at 1200 deg. C or above display a single-phase cubic garnet. According to thermal dilatometry results, calcined powders were sintered in air up to 1470 deg. C. The microstructure of sintered ceramics is made up of fine grains, the average size ranging between 3 μm and 13 μm. Density of sintered bodies ranged from 88% to 98%. Ferromagnetic resonance linewidth (ΔH -3dB ) ranged between 4352.9 A m -1 and 4392.7 A m -1 , depending on composition and microstructure

Superoxide radical-mediated photocatalytic oxidation of phenolic compounds over Ag{sup +}/TiO{sub 2}: Influence of electron donating and withdrawing substituents

Energy Technology Data Exchange (ETDEWEB)

Xiao, Jiadong [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xie, Yongbing, E-mail: ybxie@ipe.ac.cn [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Han, Qingzhen [State Key Laboratory of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Cao, Hongbin [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin 300072 (China); Wang, Yujiao [Department of Chemical and Biomedical Engineering, University of Science and Technology Beijing (China); Nawaz, Faheem; Duan, Feng [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

2016-03-05

Highlights: • A weak EWG benefited photocatalytic oxidation of phenols the most. • Phenolic compounds were dominantly oxidized by ·O{sub 2}{sup −}, rather than ·OH, {sup 1}O{sub 2} or h{sup +}. • ·O{sub 2}{sup −} preferred to nucleophilically attack EDG substituted phenols. • ·O{sub 2}{sup −} more likely electrophilically attacked EWG substituted phenols. • ·O{sub 2}{sup −} simultaneously nucleophilically and electrophilically assaulted p-chlorophenol. - Abstract: A comparative study was constructed to correlate the electronic property of the substituents with the degradation rates of phenolic compounds and their oxidation pathways under UV with Ag{sup +}/TiO{sub 2} suspensions. It was verified that a weak electron withdrawing substituent benefited photocatalytic oxidation the most, while an adverse impact appeared when a substituent was present with stronger electron donating or withdrawing ability. The addition of p-benzoquinone dramatically blocked the degradation, confirming superoxide radicals (·O{sub 2}{sup −}) as the dominant photooxidant, rather than hydroxyl radicals, singlet oxygen or positive holes, which was also independent of the substituent. Hammett relationship was established based on pseudo-first-order reaction kinetics, and it revealed two disparate reaction patterns between ·O{sub 2}{sup −} and phenolic compounds, which was further verified by the quantum chemical computation on the frontier molecular orbitals and Mulliken charge distributions of ·O{sub 2}{sup −} and phenolic compounds. It was found that electron donating group (EDG) substituted phenols were more likely nucleophilically attacked by ·O{sub 2}{sup −}, while ·O{sub 2}{sup −} preferred to electrophilically assault electron withdrawing group (EWG) substituted phenols. Exceptionally, electrophilic and nucleophilic attack by ·O{sub 2}{sup −} could simultaneously occur in p-chlorophenol degradation, consequently leading to its highest rate

Synthesis of New Cytotoxic Aminoanthraquinone Derivatives via Nucleophilic Substitution Reactions

Directory of Open Access Journals (Sweden)

Hasimah Alimon

2013-07-01

Full Text Available Aminoanthraquinones were successfully synthesized via two reaction steps. 1,4-Dihydroxyanthraquinone (1 was first subjected to methylation, reduction and acylation to give an excellent yield of anthracene-1,4-dione (3, 1,4-dimethoxyanthracene-9,10-dione (5 and 9,10-dioxo-9,10-dihydroanthracene-1,4-diyl diacetate (7. Treatment of 1, 3, 5 and 7 with BuNH2 in the presence of PhI(OAc2 as catalyst produced seven aminoanthraquinone derivatives 1a, b, 3a, and 5a–d. Amination of 3 and 5 afforded three new aminoanthraquinones, namely 2-(butylaminoanthracene-1,4-dione (3a, 2-(butylaminoanthracene-9,10-dione (5a and 2,3-(dibutylaminoanthracene-9,10-dione (5b. All newly synthesised aminoanthraquinones were examined for their cytotoxic activity against MCF-7 (estrogen receptor positive human breast and Hep-G2 (human hepatocellular liver carcinoma cancer cells using MTT assay. Aminoanthraquinones 3a, 5a and 5b exhibited strong cytotoxicity towards both cancer cell lines (IC50 1.1–13.0 µg/mL.

systemic chemistry triangle

African Journals Online (AJOL)

Temechegn

At the end of the learning process by SCT the student gain systemic learning outcomes ... Johnstone and his group [13].have demonstrated the reducing effect of working memory .... Nucleophilic Substitution Reactions, SN2-Mechanism.

Hydrothermal synthesis and characterizations of Ti substituted Mn-ferrites

Energy Technology Data Exchange (ETDEWEB)

Mostafa, Nasser Y., E-mail: nmost69@yahoo.com [Faculty of Science, Taif University, P.O. Box 888 Al-Haweiah, Taif (Saudi Arabia); Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt); Hessien, M.M. [Faculty of Science, Taif University, P.O. Box 888 Al-Haweiah, Taif (Saudi Arabia); Advanced materials Division-Central metallurgical R and D Institute (CMRDI), P.O. Box 87 Helwan, Cairo (Egypt); Shaltout, Abdallah A. [Faculty of Science, Taif University, P.O. Box 888 Al-Haweiah, Taif (Saudi Arabia); Spectroscopy Department, Physics Division, National Research Center, El Behooth Str., 12622 Dokki, Cairo (Egypt)

2012-07-15

Highlights: Black-Right-Pointing-Pointer Hydrothermal synthesized of well-crystallized Ti-substituted MnFe{sub 2}O{sub 4} nanoparticles at 180 Degree-Sign C without any calcination step. The chemical composition was represented by Mn{sub 1-2x}Ti{sub x}Fe{sub 2}O{sub 4} with x having values 0.0, 0.1, 0.2, 0.3 and 0.4. Black-Right-Pointing-Pointer The change in lattice parameter and saturation magnetization with increasing Ti-substitution was investigated and explained. Black-Right-Pointing-Pointer The change in microstructure due to Ti{sup 4+} ions substitutions was investigated using TEM analysis. - Abstarct: A series of well-crystallized Mn{sub 1-2x}Ti{sub x}Fe{sub 2}O{sub 4} nanoparticles with x values of 0.0, 0.1, 0.2, 0.3 and 0.4 have been synthesized by hydrothermal route at 180 Degree-Sign C in the presence of NaOH as mineralizer. The obtained ferrite samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM) and vibrating sample magnetometer (VSM). The XRD analysis showed that pure single phases of cubic ferrites were obtained with x up to 0.2. However, samples with x > 0.2 showed traces of unreacted anatase. The increase in Ti-substitution up to x = 0.2 leads to an increase in the lattice parameter of the prepared ferrites. On the other hand, the increase in Ti-substitution over x = 0.2 leads to a decrease in the lattice parameter. The average crystallite size was in the range of 39-57 nm, where it is increased by increasing the Ti-substitution up to x = 0.3, then decreased for x = 0.4. According to VSM results, the saturation magnetization increased with Ti ion substitution of x = 0.1 and decreased for x > 0.1.

Synthesis and purification of 13C labelled xanthine derivatives

International Nuclear Information System (INIS)

Boukraa, M.S.; Deruaz, D.; Bannier, A.; Desage, M.; Brazier, J.L.

1995-01-01

3-[Methyl- 13 )C]xanthine, 7-[Methyl- 13 )C]xanthine, 1,3-[Dimethyl- 13 )C 2 ]xanthine (theophylline-1,3-[ 13 )CH 3 ] 2 ), 1,7-[Dimethyl- 13 )C 2 ]xanthine (paraxanthine-1,7[ 13 )CH 3 ] 2 ), and 3,7-[Dimethyl- 13 )C 2 ]xanthine (theobromine-3,7-[ 13 )CH 3 ] 2 were synthesized by nucleophilic substitution reaction(SN 2 ) from xanthine (X) and iodomethane-[ 13 C]. The 3-isobutylparaxanthine-7-[ 13 CH 3 ] was prepared from 3-isobutyl-1-methylxanthine (IBMX). The compounds were purified by reverse phase semipreparative liquid chromatography and their chemical structure and purity verified by GC-MS. (Author)

Effects of aluminum substitution in C14-rich multi-component alloys for NiMH battery application

International Nuclear Information System (INIS)

Young, K.; Regmi, R.; Lawes, G.; Ouchi, T.; Reichman, B.; Fetcenko, M.A.; Wu, A.

2010-01-01

The effects of aluminum substitution to the structural, electrochemical, and gas phase hydrogen storage properties of C14-rich alloys are reported. Minor phases, including C15 and TiNi, were identified by X-ray diffraction analysis. Entropy and enthalpy were estimated from equilibrium pressure at a fixed hydrogen concentration due to the large slope factor in pressure-concentration-temperature isotherms. The stability of hydrides from these materials, determined from the pressure-concentration isotherm equilibrium pressure and maximum storage capacities has a better correlation with the change in entropy than that in enthalpy. Alloys having smaller unit cell volume, relatively low hydride heat of formation, and relatively higher degree of disorder exhibit lower plateau pressure, higher storage capacity, and smaller hydrogen diffusion coefficient. Comparing to the Co substitution in the same base alloy, Al substitution makes better contribution to both bulk hydrogen transport and surface reaction. Substituting 0.4% Al and 1.5% Co to AB2 alloy is found to be the best combination in terms of general nickel metal hydride battery performance.

Solid solubility in 1:13 phase of doping element for La(Fe,Si13 alloys

Directory of Open Access Journals (Sweden)

S. T. Zong

2016-05-01

Full Text Available The influences of Ni, Cr and Nb as substitution elements for Fe were investigated. The change in microstructure and the magnetic properties have been discussed in detail. Substitution elements Ni, Cr and Nb not only have limited solubility in NaZn13-type (1:13 phase, but also hinder the peritectoid reaction. Ni element mainly enters into La-rich phase while Cr element mainly concentrates in α-Fe phase, which both have detriment effect on the peritectoid reaction, leading to a large residual of impurity phases after annealing and a decrease of magnetic entropy change. Besides, Ni and Cr participated in peritectoid reaction by entering parent phases but slightly entering 1:13 phase, which would cause the disappearance of first order magnetic phase transition. A new phase (Fe,Si2Nb was found when Nb element substitutes Fe in La(Fe,Si13, suggesting that Nb does not participate in peritectoid reaction and only exists in (Fe,Si2Nb phase after annealing. The alloy with Nb substitution maintains the first order magnetic phase transition character.

Ostrich eggshell as calcium source for the synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc

International Nuclear Information System (INIS)

Ferreira, J.R.M.; Louro, L.H.L.; Costa, A.M.; Silva, M.H. Prado da; Campos, J.B. de

2016-01-01

In the present study, hydroxyapatite and Zn-substituted hydroxyapatite powders were synthesized using ostrich eggshell as a calcium source. The samples were analyzed by scanning electron microscopy with field emission gun, and X-ray diffraction (XRD) to identify the present phases, and X-ray fluorescence spectroscopy for quantitative chemical analysis of the synthesized and heat treated powders. The Fourier transform infrared spectroscopy technique was used before and after heat treatments at 700, 900 and 1100 °C in order to identify the functional groups present, as an additional technique to the XRD analysis. The results presented in this study represent a promising method for synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc, since the results showed no undesirable phases or impurities in the produced powders. It was observed that Zn-substituted hydroxyapatite showed higher thermal stability, when compared to pure hydroxyapatite. (author)

Ostrich eggshell as calcium source for the synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc

Energy Technology Data Exchange (ETDEWEB)

Ferreira, J.R.M.; Louro, L.H.L.; Costa, A.M.; Silva, M.H. Prado da [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Campos, J.B. de, E-mail: josericardo@r-crio.com, E-mail: louro@ime.eb.br, E-mail: andrea@r-crio.com, E-mail: brantjose@gmail.com, E-mail: marceloprado@ime.eb.br [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

2016-10-15

In the present study, hydroxyapatite and Zn-substituted hydroxyapatite powders were synthesized using ostrich eggshell as a calcium source. The samples were analyzed by scanning electron microscopy with field emission gun, and X-ray diffraction (XRD) to identify the present phases, and X-ray fluorescence spectroscopy for quantitative chemical analysis of the synthesized and heat treated powders. The Fourier transform infrared spectroscopy technique was used before and after heat treatments at 700, 900 and 1100 °C in order to identify the functional groups present, as an additional technique to the XRD analysis. The results presented in this study represent a promising method for synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc, since the results showed no undesirable phases or impurities in the produced powders. It was observed that Zn-substituted hydroxyapatite showed higher thermal stability, when compared to pure hydroxyapatite. (author)

2-Bromo-1,4-naphthoquinone: a potentially improved substitute of menadione in Apatone™ therapy

Directory of Open Access Journals (Sweden)

F.S. Graciani

2012-08-01

Full Text Available Apatone™, a combination of menadione (2-methyl-1,4-naphthoquinone, VK3 and ascorbic acid (vitamin C, VC is a new strategy for cancer treatment. Part of its effect on tumor cells is related to the cellular pro-oxidative imbalance provoked by the generation of hydrogen peroxide (H2O2 through naphthoquinone redox cycling. In this study, we attempted to find new naphthoquinone derivatives that would increase the efficiency of H2O2 production, thereby potentially increasing its efficacy for cancer treatment. The presence of an electron-withdrawing group in the naphthoquinone moiety had a direct effect on the efficiency of H2O2 production. The compound 2-bromo-1,4-naphthoquinone (BrQ, in which the bromine atom substituted the methyl group in VK3, was approximately 10- and 19-fold more efficient than VK3 in terms of oxygen consumption and H2O2 production, respectively. The ratio [H2O2]produced / [naphthoquinone]consumed was 68 ± 11 and 5.8 ± 0.2 (µM/µM for BrQ and VK3, respectively, indicating a higher efficacy of BrQ as a catalyst for the autoxidation of ascorbic acid. Both VK3 and BrQ reacted with glutathione (GSH, but BrQ was the more effective substrate. Part of GSH was incorporated into the naphthoquinone, producing a nucleophilic substitution product (Q-SG. The depletion of BrQ by GSH did not prevent its redox capacity since Q-SG was also able to catalyze the production of reactive oxygen species. VK3/VC has already been submitted to clinical trials for the treatment of prostate cancer and has demonstrated promising results. However, replacement of VK3 with BrQ will open new lines of investigation regarding this approach to cancer treatment.

2-Bromo-1,4-naphthoquinone: a potentially improved substitute of menadione in Apatone™ therapy

International Nuclear Information System (INIS)

Graciani, F.S.; Ximenes, V.F.

2012-01-01

Apatone™, a combination of menadione (2-methyl-1,4-naphthoquinone, VK 3 ) and ascorbic acid (vitamin C, VC) is a new strategy for cancer treatment. Part of its effect on tumor cells is related to the cellular pro-oxidative imbalance provoked by the generation of hydrogen peroxide (H 2 O 2 ) through naphthoquinone redox cycling. In this study, we attempted to find new naphthoquinone derivatives that would increase the efficiency of H 2 O 2 production, thereby potentially increasing its efficacy for cancer treatment. The presence of an electron-withdrawing group in the naphthoquinone moiety had a direct effect on the efficiency of H 2 O 2 production. The compound 2-bromo-1,4-naphthoquinone (BrQ), in which the bromine atom substituted the methyl group in VK 3 , was approximately 10- and 19-fold more efficient than VK 3 in terms of oxygen consumption and H 2 O 2 production, respectively. The ratio [H 2 O 2 ] produced / [naphthoquinone] consumed was 68 ± 11 and 5.8 ± 0.2 (µM/µM) for BrQ and VK 3 , respectively, indicating a higher efficacy of BrQ as a catalyst for the autoxidation of ascorbic acid. Both VK 3 and BrQ reacted with glutathione (GSH), but BrQ was the more effective substrate. Part of GSH was incorporated into the naphthoquinone, producing a nucleophilic substitution product (Q-SG). The depletion of BrQ by GSH did not prevent its redox capacity since Q-SG was also able to catalyze the production of reactive oxygen species. VK 3 /VC has already been submitted to clinical trials for the treatment of prostate cancer and has demonstrated promising results. However, replacement of VK 3 with BrQ will open new lines of investigation regarding this approach to cancer treatment

Palladium-catalyzed ring-opening reactions of cyclopropanated 7-oxabenzonorbornadiene with alcohols

Directory of Open Access Journals (Sweden)

Katrina Tait

2016-10-01

Full Text Available Palladium-catalyzed ring-opening reactions of cyclopropanated 7-oxabenzonorbornadiene derivatives using alcohol nucleophiles were investigated. The optimal conditions were found to be 10 mol % PdCl2(CH3CN2 in methanol, offering yields up to 92%. The reaction was successful using primary, secondary and tertiary alcohol nucleophiles and was compatible with a variety of substituents on cyclopropanated oxabenzonorbornadiene. With unsymmetrical C1-substituted cyclopropanated 7-oxabenzonorbornadienes, the regioselectivity of the reaction was excellent, forming only one regioisomer in all cases.

Stereocontrolled generation of nucleophilic (Z)- or (E)-α-fluoroalkenylchromium reagents via carbon-fluorine bond activation: highly stereoselective synthesis of (E)- or (Z)-β-fluoroallylic alcohols.

Science.gov (United States)

Nihei, Takashi; Yokotani, Saya; Ishihara, Takashi; Konno, Tsutomu

2014-02-14

Highly nucleophilic (Z)- or (E)-α-fluoroalkenylchromium species could be generated in a stereoselective manner via C-F bond activation of CBrF2-containing molecules, and they reacted smoothly with various aldehydes to give (E)- or (Z)-β-fluoroallylic alcohol derivatives in high yields, respectively.

[The social portrait of substitute families and modes of development of medical pedagogical monitoring].

Science.gov (United States)

Aver'ianova, N I; Khanova, N A

2014-01-01

The study demonstrated that in Russia the major cause of orphanage is a social life-style of biological parents of orphan children. The substitute families are more often large with number of children from 3 to 8 and quarter of them are incomplete. The mean age of substitute parent consists 47.8 ± 1.4 years. The leading motivation to take orphan child/or education in family is the availability of kindred relationship regarding child or "deserted nest syndrome". At the initial phase of establishing of substitute family the most of substitute parents/tutors face with problems of health status and behavioral deviations of foster children. The substitute parents are unsatisfied with quality of medical monitoring of foster children. They also suffer fromdeficiency of information concerning characteristics of development, health conditions and modes of rehabilitation of children. In the judgment of substitute parents/tutors placing child into family conditions effects positively on one's development and health, behavior and emotional background. In substitute families, conditions organized for children can be named as approximated to conditions of residing in biological (home) families. The system of medical psychological and pedagogical monitoring of children of this category is needed in further development.

Kinetic Study on Nucleophilic Substitution Reactions of 4-Chloro-2-nitrophenyl X-Substituted-benzoates with Cyclic Secondary Amines: Effect of Substituent X on Reactivity and Reaction Mechanism

Energy Technology Data Exchange (ETDEWEB)

Jeon, Seong Hoon; Kim, Hyun Soo; Han, Young Joon [Sejong Science High School, Seoul (Korea, Republic of); Kim, Minyoung; Um, Ikhwan [Ewha Woman' s Univ., Seoul (Korea, Republic of)

2013-10-15

Second-order rate constants (k{sub N}) have been measured spectrophotometrically for the reactions of 4-chloro-2-nitrophenyl X-substituted-benzoates (1a-1h) with a series of cyclic secondary amines in 80 mol % H{sub 2}O/20 mol % DMSO at 25.0 ± 0.1 .deg. C. The Hammett plot for the reactions of 1a-1h with piperidine consists of two intersecting straight lines, while the Yukawa-Tsuno plot exhibits an excellent linear correlation with ρ{sub X} = 1.25 and r = 0.58, indicating that the nonlinear Hammett plot is not due to a change in the rate-determining step (RDS) but is caused by ground-state stabilization through resonance interactions for substrates possessing an electron-withdrawing group in the benzoyl moiety. The Brφnsted-type plot for the reactions of 4-chloro-2-nitrophenyl benzoate (1d) with a series of cyclic secondary amines curves downward with β{sub 2} = 0.85, β{sub 1} = 0.24, and pK{sub a}{sup o} = 10.5, implying that a change in RDS occurs from the k{sub 2} step to the k{sub 1} process as the pK{sub a} of the conjugate acid of the amine exceeds 10.5. Dissection of k{sub N} into the microscopic rate constants k{sub 1} and k{sub 2}/k{sub -1} ratio associated with the reaction of 1d reveals that k{sub 2} is dependent on the amine basicity, which is contrary to generally held views.

Processing and electrical properties of gallium-substituted lead zirconate titanate ceramics

Science.gov (United States)

Hajra, Sugato; Sharma, Pulkit; Sahoo, Sushrisangita; Rout, P. K.; Choudhary, R. N. P.

2017-12-01

In the present paper, the effect of gallium (Ga) substitution on structural, microstructural, electrical conductivity of Pb(ZrTi)O3 (PZT) in the morphotropic phase boundary (MPB) region (i.e., Pb0.96Ga0.04(Zr0.48Ti0.52)0.99O3 (PGaZT-4)) was investigated. Increased grain density increases the resistivity of the Ga-modified PZT system. Preliminary structural analysis using X-ray diffraction pattern and data showed the existence of two phases [major tetragonal (T) and minor monoclinic (M)]. Field emission scanning electron micrograph (FESEM) showed the distribution of spherical as well as platelet type grains with small pores. The behavior of dielectric constant with temperature of PGaZT-4 exhibited the suppression of the ferroelectric phase transition [i.e., disappearance of Curie temperature ( T c)]. The complex impedance spectroscopy (CIS) technique helped to investigate the impedance parameters of PGaZT-4 in MPB region in a wide range of temperature (250-500 °C) and frequency (1-1000 kHz) region. The impedance parameters of the material are found to be strongly dependent on frequency of AC electric field and temperature. The substitution of gallium at the Pb site of PZT generally enhances the dielectric constant and decreases loss tangent. The AC conductivity vs frequency ( f = ω2 π) in the region of dispersion follows the universal response of Jonscher's equation. Enhanced resistive characteristics were observed for Ga-substituted PZT in comparison to the pure PZT, which was well ensured from the studies of electrical parameters, such as impedance and AC conductivity.

Stereoinversion of tertiary alcohols to tertiary-alkyl isonitriles and amines.

Science.gov (United States)

Pronin, Sergey V; Reiher, Christopher A; Shenvi, Ryan A

2013-09-12

The SN2 reaction (bimolecular nucleophilic substitution) is a well-known chemical transformation that can be used to join two smaller molecules together into a larger molecule or to exchange one functional group for another. The SN2 reaction proceeds in a very predictable manner: substitution occurs with inversion of stereochemistry, resulting from the 'backside attack' of the electrophilic carbon by the nucleophile. A significant limitation of the SN2 reaction is its intolerance for tertiary carbon atoms: whereas primary and secondary alcohols are viable precursor substrates, tertiary alcohols and their derivatives usually either fail to react or produce stereochemical mixtures of products. Here we report the stereochemical inversion of chiral tertiary alcohols with a nitrogenous nucleophile facilitated by a Lewis-acid-catalysed solvolysis. The method is chemoselective against secondary and primary alcohols, thereby complementing the selectivity of the SN2 reaction. Furthermore, this method for carbon-nitrogen bond formation mimics a putative biosynthetic step in the synthesis of marine terpenoids and enables their preparation from the corresponding terrestrial terpenes. We expect that the general attributes of the methodology will allow chiral tertiary alcohols to be considered viable substrates for stereoinversion reactions.

An enzymatic method for determination of azide and cyanide in aqueous phase.

Science.gov (United States)

Wan, Nan-Wei; Liu, Zhi-Qiang; Xue, Feng; Zheng, Yu-Guo

2015-11-20

A halohydrin dehalogenase (HHDH-PL) from Parvibaculum lavamentivorans DS-1 was characterized and applied to determine azide and cyanide in the water. In this methodology, HHDH-PL catalysed azide and cyanide to react with butylene oxide and form corresponding β-substituted alcohols 1-azidobutan-2-ol (ABO) and 3-hydroxypentanenitrile (HPN) that could be quantitatively detected by gas chromatograph. The detection calibration curves for azide (R(2)=0.997) and cyanide (R(2)=0.995) were linear and the lower limits of detection for azide and cyanide were 0.1 and 0.3mM, respectively. Several other nucleophiles were identified having no effect on the analysis of azide and cyanide, excepting nitrite which influenced the detection of cyanide. This was the first report of a biological method to determine the inorganic azide and cyanide by converting them to the measurable organics. Copyright © 2015 Elsevier B.V. All rights reserved.

Effect of Ta substitution method on the mechanical properties of Ni3(Si,Ti) intermetallic alloy

International Nuclear Information System (INIS)

Imajo, Daiki; Kaneno, Yasuyuki; Takasugi, Takayuki

2013-01-01

In this study, Ta was added to an L1 2 -type Ni 3 (Si,Ti) alloy at different levels and into different substitution sites, substituting for either Ni, Ti or Si. The solubility limits of Ta in the L1 2 phase were 1.9 at%, 5.7 at% and 1.0 at% when Ta substituted for Ni, Ti and Si, respectively. The lattice parameters in the L1 2 phase region increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys, in which Ta substituted for Ni, Si and Ti, respectively. The room-temperature hardness in the L1 2 phase region increased linearly with increasing Ta content, and the increment rate increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys. Similarly, the room-temperature 0.2% proof stress as well as the tensile strength in the L1 2 phase region increased linearly with increasing Ta content, and the increment rate increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys. High tensile elongation was observed at room temperature when the microstructures remain in the L1 2 single phase. At high temperatures, a positive temperature dependence of the hardness as well as the flow strength was observed in the quaternary alloys. It was also shown that the wear resistance of the quaternary Ta(Ti) alloys was improved and attributed to plastically induced hardening of the worn surfaces combined with the positive temperature dependence of the flow strength. The strengthening and hardening resulting from Ta addition was suggested to be due to the hardening of the solid solution arising from the misfits in the atomic radius between Ta and the constituent atoms Ni, Ti or Si

Modified signed-digit trinary arithmetic by using optical symbolic substitution

Science.gov (United States)

Awwal, A. A. S.; Islam, M. N.; Karim, M. A.

1992-04-01

Carry-free addition and borrow-free subtraction of modified signed-digit trinary numbers with optical symbolic substitution are presented. The proposed two-step and three-step algorithms can be easily implemented by using phase-only holograms, optical content-addressable memories, a multichannel correlator, or a polarization-encoded optical shadow-casting system.

40 CFR 721.2577 - Copper complex of (substituted sulfonaphthyl azo substituted phenyl) disulfonaphthyl azo, amine...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Copper complex of (substituted... Copper complex of (substituted sulfonaphthyl azo substituted phenyl) disulfonaphthyl azo, amine salt... substances identified generically as copper complex of (substituted sulfonaphthyl azo substituted phenyl...

Tandem ring-closing metathesis/isomerization reactions for the total synthesis of violacein

DEFF Research Database (Denmark)

Petersen, Mette Terp; Nielsen, Thomas Eiland

2013-01-01

A series of 5-substituted 2-pyrrolidinones was synthesized through a one-pot ruthenium alkylidene-catalyzed tandem RCM/isomerization/nucleophilic addition sequence. The intermediates resulting from RCM/isomerization showed reactivity toward electrophiles in aldol condensation reactions which...

Ionic Liquid Epoxy Resin Monomers

Science.gov (United States)

Paley, Mark S. (Inventor)

2013-01-01

Ionic liquid epoxide monomers capable of reacting with cross-linking agents to form polymers with high tensile and adhesive strengths. Ionic liquid epoxide monomers comprising at least one bis(glycidyl) N-substituted nitrogen heterocyclic cation are made from nitrogen heterocycles corresponding to the bis(glycidyl) N-substituted nitrogen heterocyclic cations by a method involving a non-nucleophilic anion, an alkali metal cation, epichlorohydrin, and a strong base.

Ostrich eggshell as calcium source for the synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc

Directory of Open Access Journals (Sweden)

J. R. M. Ferreira

Full Text Available Abstract In the present study, hydroxyapatite and Zn-substituted hydroxyapatite powders were synthesized using ostrich eggshell as a calcium source. The samples were analyzed by scanning electron microscopy with field emission gun, and X-ray diffraction (XRD to identify the present phases, and X-ray fluorescence spectroscopy for quantitative chemical analysis of the synthesized and heat treated powders. The Fourier transform infrared spectroscopy technique was used before and after heat treatments at 700, 900 and 1100 °C in order to identify the functional groups present, as an additional technique to the XRD analysis. The results presented in this study represent a promising method for synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc, since the results showed no undesirable phases or impurities in the produced powders. It was observed that Zn-substituted hydroxyapatite showed higher thermal stability, when compared to pure hydroxyapatite.

[Glycosilated derivatives of substituted hydroxylamine. II. Phase transfer synthesis and investigation of glycosyl transfer reaction of glucosaminides of substituted hydroxylavine].

Science.gov (United States)

Kur'ianov, V O; Lushchik, A A; Chupakhina, T A

2013-01-01

1-(2-Acetamido-3,4,6,-tri-O-acetyl-2-deoxy-beta-D-glucopyranosyloxy)-benzotriazole reacted in boiling dichloromethane, in the presence of Luis acids as a promotors with primary and secondary aliphatic and cycloaliphatic alcohols and diisopropilidene galactose with alkyl-O-1,2-trans-glucosaminides formation. It was shown that the other glucosaminides of substituted hydroxylamine are not participated in this reaction. Structures of glucosaminides were identify by 1H-NMR-spectroscopy and comparison with known compounds.

A theoretical quantum study on the distribution of electrophilic and nucleophilic active sites on Cu(100) surfaces modeled as finite clusters; Un estudio teorico cuantico sobre la distribucion de sitios activos electrofilicos y nucleofilicos sobre superficies de Cu(100) modeladas como cumulos finitos

Energy Technology Data Exchange (ETDEWEB)

Rios R, C.H.; Romero R, M. [Universidad Autonoma Metropolitana-Azcapotzalco, Departamento de Materiales, Av. San Pablo 180, Col. Reynosa Tamaulipas, 02200 Mexico D.F. (Mexico); Ponce R, A.; Mendoza H, L.H. [Universidad Autonoma del Estado de Hidalgo, Centro de Investigaciones Quimicas, Carretera Pachuca-Tulancingo km. 4.5, 42181 Pachuca, Hidalgo (Mexico)]. e-mail: clara_hrr@yahoo.es

2008-07-01

In this work, it is shown a theoretical quantum study of the active sites distribution on a monocrystalline surface of Cu(100). The copper surface was modeled as finite clusters of 14, 23, 38 and 53 atoms. We performed Hartree-Fock and Density Functional Theory (B3LYP) ab initio calculations employing the pseudopotentials of Hay and Wadt (LANLlMB y LANL2DZ). From calculations, we found a work function value of 4.1 eV. The mapping of the HOMO and LUMO in the frozen core approximation, allowed us finding the electrophilic and nucleophilic active sites distribution, respectively. The results indicated that electrophilic sites on the Cu(100) surface were located on hollow position and its numerical density was 8.6 x 10{sup 16} sites cm{sup -2}. From the nucleophilic local softness study, it was found that the nucleophilic sites were formed by a group of atoms and it had a numerical density of 2.4x 10{sup 16} sitescm{sup -2} . Last results indicated that adsorptions with 2 x 2 and 3 x 3 distributions can be favored onto a Cu(100) surface for the electrophilic and nucleophilic cases, respectively. (Author)

The mechanism of the modified Ullmann reaction

NARCIS (Netherlands)

Sperotto, Elena; Klink, Gerard P.M. van; Koten, Gerard van; Vries, Johannes G. de

2010-01-01

The copper-mediated aromatic nucleophilic substitution reactions developed by Fritz Ullmann and Irma Goldberg required stoichiometric amounts of copper and very high reaction temperatures. Recently, it was found that addition of relatively cheap ligands (diamines, aminoalcohols, diketones, diols)

Analysis of 6912 unselected somatic hypermutations in human VDJ rearrangements reveals lack of strand specificity and correlation between phase II substitution rates and distance to the nearest 3' activation-induced cytidine deaminase target

DEFF Research Database (Denmark)

Ohm-Laursen, Line; Barington, Torben

2007-01-01

-23*01) from blood B lymphocytes enriched for CD27-positive memory cells. Analyses of 6,912 unique, unselected substitutions showed that in vivo hot and cold spots for the SHM of C and G residues corresponded closely to the target preferences reported for AID in vitro. A detailed analysis of all possible four......-nucleotide motifs present on both strands of the V(H) gene showed significant correlations between the substitution frequencies in reverse complementary motifs, suggesting that the SHM machinery targets both strands equally well. An analysis of individual J(H) and D gene segments showed that the substitution...... rates in G and T residues correlated inversely with the distance to the nearest 3' WRC AID hot spot motif on both the nontranscribed and transcribed strands. This suggests that phase II SHM takes place 5' of the initial AID deamination target and primarily targets T and G residues or, alternatively...

Effect of Ta substitution method on the mechanical properties of Ni{sub 3}(Si,Ti) intermetallic alloy

Energy Technology Data Exchange (ETDEWEB)

Imajo, Daiki; Kaneno, Yasuyuki; Takasugi, Takayuki, E-mail: takasugi@mtr.osakafu-u.ac.jp

2013-12-20

In this study, Ta was added to an L1{sub 2}-type Ni{sub 3}(Si,Ti) alloy at different levels and into different substitution sites, substituting for either Ni, Ti or Si. The solubility limits of Ta in the L1{sub 2} phase were 1.9 at%, 5.7 at% and 1.0 at% when Ta substituted for Ni, Ti and Si, respectively. The lattice parameters in the L1{sub 2} phase region increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys, in which Ta substituted for Ni, Si and Ti, respectively. The room-temperature hardness in the L1{sub 2} phase region increased linearly with increasing Ta content, and the increment rate increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys. Similarly, the room-temperature 0.2% proof stress as well as the tensile strength in the L1{sub 2} phase region increased linearly with increasing Ta content, and the increment rate increased in the order of the Ta(Ni)>Ta(Si)>Ta(Ti) quaternary alloys. High tensile elongation was observed at room temperature when the microstructures remain in the L1{sub 2} single phase. At high temperatures, a positive temperature dependence of the hardness as well as the flow strength was observed in the quaternary alloys. It was also shown that the wear resistance of the quaternary Ta(Ti) alloys was improved and attributed to plastically induced hardening of the worn surfaces combined with the positive temperature dependence of the flow strength. The strengthening and hardening resulting from Ta addition was suggested to be due to the hardening of the solid solution arising from the misfits in the atomic radius between Ta and the constituent atoms Ni, Ti or Si.

Processing and electrical properties of gallium-substituted lead zirconate titanate ceramics

Energy Technology Data Exchange (ETDEWEB)

Hajra, Sugato; Sharma, Pulkit; Rout, P.K. [Siksha O Anusandhan University, Department of Electrical and Electronics Engineering, Bhubaneswar (India); Sahoo, Sushrisangita; Choudhary, R.N.P. [Siksha O Anusandhan University, Department of Physics, Bhubaneswar (India)

2017-12-15

In the present paper, the effect of gallium (Ga) substitution on structural, microstructural, electrical conductivity of Pb(ZrTi)O{sub 3} (PZT) in the morphotropic phase boundary (MPB) region (i.e., Pb{sub 0.96}Ga{sub 0.04}(Zr{sub 0.48}Ti{sub 0.52}){sub 0.99}O{sub 3} (PGaZT-4)) was investigated. Increased grain density increases the resistivity of the Ga-modified PZT system. Preliminary structural analysis using X-ray diffraction pattern and data showed the existence of two phases [major tetragonal (T) and minor monoclinic (M)]. Field emission scanning electron micrograph (FESEM) showed the distribution of spherical as well as platelet type grains with small pores. The behavior of dielectric constant with temperature of PGaZT-4 exhibited the suppression of the ferroelectric phase transition [i.e., disappearance of Curie temperature (T{sub c})]. The complex impedance spectroscopy (CIS) technique helped to investigate the impedance parameters of PGaZT-4 in MPB region in a wide range of temperature (250-500 C) and frequency (1-1000 kHz) region. The impedance parameters of the material are found to be strongly dependent on frequency of AC electric field and temperature. The substitution of gallium at the Pb site of PZT generally enhances the dielectric constant and decreases loss tangent. The AC conductivity vs frequency (f = ω2π) in the region of dispersion follows the universal response of Jonscher's equation. Enhanced resistive characteristics were observed for Ga-substituted PZT in comparison to the pure PZT, which was well ensured from the studies of electrical parameters, such as impedance and AC conductivity. (orig.)

Enantioseparation of angiotensin II receptor type 1 blockers: evaluation of 6-substituted carbamoyl benzimidazoles on immobilized polysaccharide-based chiral stationary phases. Unusual temperature behavior.

Science.gov (United States)

Su, Ran; Hou, Zhun; Sang, Lihong; Zhou, Zhi-Ming; Fang, Hao; Yang, Xinying

2017-09-15

Enantioseparation of thirteen 6-substituted carbamoyl benzimidazoles by high-performance liquid chromatography (HPLC) was investigated using two immobilized polysaccharide-based chiral stationary phases (CSPs), Chiralpak IC and Chiralpak IA, in normal-phase mode. Most of the examined compounds were completely resolved. The effects of a polar alcohol modifier, analyte structure, and column temperature on the chiral recognition were investigated. Furthermore, the structure-retention relationship was evaluated, and thermodynamic parameters were calculated from plots of ln k' or ln α versus 1/T. The thermodynamic parameters indicated that the separations were enthalpy-driven. Moreover, nonlinear van't Hoff plots were obtained on Chiralpak IA. However, two unusual phenomena were observed: (1) an unusual increase in retention with increasing temperature with linear van't Hoff plots on Chiralpak IC and (2) an extremely high T iso value (i.e., several thousand degrees centigrade). Copyright © 2017 Elsevier B.V. All rights reserved.

Evidence for reentrant spin glass behavior in transition metal substituted Co-Ga alloys near critical concentration

Science.gov (United States)

Yasin, Sk. Mohammad; Srinivas, V.; Kasiviswanathan, S.; Vagadia, Megha; Nigam, A. K.

2018-04-01

In the present study magnetic and electrical transport properties of transition metal substituted Co-Ga alloys (near critical cobalt concentration) have been investigated. Analysis of temperature and field dependence of dc magnetization and ac susceptibility (ACS) data suggests an evidence of reentrant spin glass (RSG) phase in Co55.5TM3Ga41.5 (TM = Co, Cr, Fe, Cu). The magnetic transition temperatures (TC and Tf) are found to depend on the nature of TM element substitution with the exchange coupling strength Co-Fe > Co-Co > Co-Cu > Co-Cr. From magnetization dynamics precise transition temperatures for the glassy phases are estimated. It is found that characteristic relaxation times are higher than that of spin glasses with minimal spin-cluster formation. The RSG behavior has been further supported by the temperature dependence of magnetotransport studies. From the magnetic field and substitution effects it has been established that the magnetic and electrical transport properties are correlated in this system.

Synthesis of 3-[18F]-fluoromethyl-TCP1, a potential tool for PET study of the NMDA receptor channel complex

International Nuclear Information System (INIS)

Ponchant, M.; Crouzel, C.

1992-01-01

In an attempt to visualize the NMDA glutamatergic receptors and after checking the biological activity of the cold 3-fluoromethyl-TCP, 3-[ 18 F]-fluoro-methyl-TCP was synthesized by a nucleophilic substitution of 3-bromomethyl-TCP with [ 18 F - ]. (author)

Biodiesel from soybean oil: experimental procedure of transesterification for organic chemistry laboratories

International Nuclear Information System (INIS)

Geris, Regina; Santos, Nadia Alessandra Carmo dos; Amaral, Bruno Andrade; Maia, Isabelle de Souza; Castro, Vinicius Dourado; Carvalho, Jose Roque Mota

2007-01-01

The transesterification procedure of triacylglycerides from soybean oil (in natura and waste oil) to give biodiesel was adapted to semi-micro laboratory scale as an additional experimental technique of nucleophilic acyl substitution for undergraduate courses in Chemistry and related areas. (author)

2,6,10-Tris(dialkylamino)trioxatriangulenium ions. Synthesis, structure, and properties of exceptionally stable carbenium ions

DEFF Research Database (Denmark)

Laursen, B.W.; Krebs, Frederik C; Nielsen, M.F.

1998-01-01

A general synthetic route to a novel type of triamino-substituted planar carbenium ions (5) is reported. The synthetic method is based on a facile and selective nucleophilic aromatic substitution on the 4,6-trimethoxyphenyl)carbenium ion (1) with amines and gives access to a wide variety of more.......Electrochemical reduction of compound 5a leads to rapid dimerization. Two consecutive one-electron oxidations are identified by cyclic voltammetry....

Combined effects of Sr substitution and pressure on the ground states in CaFe2As2

Science.gov (United States)

Knöner, S.; Gati, E.; Köhler, S.; Wolf, B.; Tutsch, U.; Ran, S.; Torikachvili, M. S.; Bud'ko, S. L.; Canfield, P. C.; Lang, M.

2016-10-01

We present a detailed study of the combined effects of Sr substitution and hydrostatic pressure on the ground-state properties of CaFe2As2 . Measurements of the electrical resistance and magnetic susceptibility, both at ambient and finite pressure P ≤2 GPa, were performed on Ca1 -xSrxFe2As2 single crystals grown out of Sn flux. We find that by Sr substitution the transition temperature to the magnetic/structural phase is enhanced and therefore a higher pressure is needed to suppress the transition to lowest temperature. In addition, the transition to the collapsed tetragonal phase is found at a pressure, which is distinctly higher than in the pure compound. This implies that the stability ranges of both phases shift on the pressure-axis upon doping, but the latter one with a higher rate. These observations suggest the possibility of separating the two phase lines, which intersect already at elevated temperatures for x =0 and low Sr concentration levels. For x =0.177 , we find strong evidence that both phases remain separated down to the lowest temperature and that a zero-resistance state emerges in this intermediate pressure window. This observation indicates that Sr substitution combined with hydrostatic pressure provides another route for stabilizing superconductivity in CaFe2As2 . Our results are consistent with the notion that (i) preserving the fluctuations associated with the structural-magnetic transition to low temperatures is vital for superconductivity to form in this material and that (ii) the nonmagnetic collapsed tetragonal phase is detrimental for superconductivity.

[The substitution effect of leadership substitutes for transformational leadership in nursing organization].

Science.gov (United States)

Kim, Jeong-Hee

2006-04-01

This paper was conducted to examine the effects of transformational leadership behaviors, within the substitutes for leadership model (Kerr & Jermier, 1978). Data was collected from 181 staff nurses in 3 general hospitals, with self-reporting questionnaires (MLQ developed by Bass, rd-SLS developed by Podsakoff, et al., and MSQ developed by Weiss, et al.). Descriptive statistics, factor analysis, Cronbach's alpha and moderated regression analysis were used. 1) The transformational leader behaviors and substitutes for leadership each had correlations with job satisfaction. 2) The total amount of variance accounted for by the substitutes for leadership was substantially greater than by the transformational leadership behaviors. 3) Few of the substitutes variables moderated the relationships between the transformational leader behaviors and job satisfaction in a manner consistent with that specified by Howell, Dorfman, and Kerr (1986). The finding of this study suggest that leaders need to have a better understanding of those contextual variables that influence job satisfaction. Thus future research should focus attention on the moderating effects of substitutes, as well as the things that leaders can do to influence them. In addition, it may be good to examine the effects of substitutes on other criterion variables.

Ultrasound Promoted Synthesis of Bis(substituted pyrazol-4-ylcarbonyl-Substituted Thioureas

Directory of Open Access Journals (Sweden)

Li Xiao

2009-03-01

Full Text Available A series of novel bis(substituted pyrazol-4-ylcarbonyl-substituted thioureas have been synthesized by the reactions of substituted pyrazol-4-ylcarbonyl isothiocyanates with different diamines under ultrasound irradiation and classical heating method at 20-25 °C. In general, substantial improvement in rates and modest yields increases were observed when reactions were carried out under sonication, compared with the classical heating method. The structures of these compounds have been elucidated by elemental and spectral (IR, 1H-NMR analysis.

Magnetic and electronic properties of the Cu-substituted Weyl semimetal candidate ZrCo2Sn.

Science.gov (United States)

Kushwaha, S K; Wang, Zhijun; Kong, Tai; Cava, Robert

2018-01-04

We report that the partial substitution of Cu for Co has a significant impact on the magnetic properties of the Heusler-phase Weyl fermion candidate ZrCo₂Sn. Polycrystalline samples of ZrCo_2-xCu_xSn (x = 0.0 to 1.0) exhibited a linearly decreasing ferromagnetic transition temperature and similarly decreasing saturated magnetic moment on increasing Cu substitution x. Materials with Cu contents near x = 1 and several other quaternary materials synthesized at the same x (ZrCoT'Sn (T' = Rh, Pd, Ni)) display what appears to be non-ferromagnetic magnetization behavior with spin glass characteristics. Electronic structure calculations suggest that the half-metallic nature of unsubstituted ZrCo₂Sn is disrupted significantly by the Cu substitutions, leading to the breakdown of the magnetization vs. electron count guidelines usually followed by Heusler phases, and a more typical metallic non-spin-polarized electronic structure at high x. © 2018 IOP Publishing Ltd.

Alkylation of N-substituted 2-phenylacetamides

Directory of Open Access Journals (Sweden)

SLOBODAN D. PETROVIC

2004-10-01

Full Text Available Various N-substituted phenylacetamides were alkylated using different alkylating agents under neutral and basic conditions. Reactions were performed at different reaction temperatures and in various solvents. Also, a number of various catalysts were used including phase-transfer catalysts. Reactions were followed using GC or GC-MS technique and the presence as well as the yields of the alkylation products were established. Generally, the best yield and high selectivity in the studied reactions were achieved under basic conditions where in the certain cases some products, mostly N-product, were obtained solely in quantitative yields.

Inducement of ferromagnetic-metallic phase in intermediate-doped charge-ordered Pr0.75Na0.25MnO3 manganite by K+ substitution

Science.gov (United States)

Rozilah, R.; Ibrahim, N.; Mohamed, Z.; Yahya, A. K.; Khan, Nawazish A.; Khan, M. Nasir

2017-09-01

Polycrystalline Pr0.75Na0.25-xKxMnO3 (x = 0, 0.05, 0.10, 0.15 and 0.20) ceramics were prepared using conventional solid-state method and their structural, magnetic and electrical transport properties were investigated. Magnetization versus temperature measurements showed un-substituted sample exhibited paramagnetic behavior with charge-ordered temperature, TCO around 218 K followed by antiferromagnetic behavior at transition temperature, TN ∼ 170 K. K+-substitution initially weakened CO state for x = 0.05-0.10 then successfully suppressed the CO state for x = 0.15-0.20 and inducing ferromagnetic-paramagnetic transition with Curie temperature, TC increased with x. In addition, deviation of the temperature dependence of inverse magnetic susceptibility curves from the Curie-Weiss law suggests the existence of Griffiths phase-like increased with x. Magnetization versus magnetic field curves show existence of hysteresis loops at T critical field. Electrical resistivity measurements showed an insulating behavior for x = 0 sample while for x = 0.05-0.20 samples showed metal-insulator transition and transition temperature, TMI increased with x. The increased in TC and TMI are attributed to the increase in tolerance factor which indicates reduction in MnO6 octahedral distortion consequently enhanced double exchange interaction.

Structural, morphological and magnetic properties variation of nickel-manganese ferrites with lithium substitution

International Nuclear Information System (INIS)

Momin, A.A.; Parvin, Roksana; Akther Hossain, A.K.M.

2017-01-01

Mixed ferrites with nominal chemical compositions Li_xNi_0_._2Mn_0_._8_−_2_xFe_2_+_xO_4 ranging from x=0 to 0.4 in the steps of 0.1 have been prepared by the auto combustion technique. The X-ray diffraction patterns consist of major cubic spinel Li_xNi_0_._2Mn_0_._8_−_2_xFe_2_+_xO_4 phase with minor impurity phases (Fe_2O_3 and MnO) and with Li substitution phase purity has increased, such that for x=0.4 pure phase spinel structure has been obtained. The lattice parameter has decreased with the increase in Li content obeying Vegard’s law. Both the bulk density and theoretical density have decreased with Li content and with sintering temperature (T_s) up to 1300 °C ρ_B has increased and beyond that it has decreased. Morphological studies have performed by a high resolution optical microscope and observed that average grain size noticeably dependent on Li substitution. The initial permeability (μ_i′′) has found to decrease with Li substitution. The Curie temperature (T_C) has determined from the temperature dependent μ_i′′ and found to increases with Li content. From the room temperature magnetization measurement, it has observed that all samples are in ferrimagnetic state at room temperature. The number of Bohr magneton has been obtained from the observed saturation magnetization. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance are studied in the frequency range 20 Hz–10 MHz. Frequency dependence of dielectric constant in lower frequencies indicates a usual dielectric dispersion due to the Maxwell-Wagner type interfacial polarization. Dielectric loss tangent shows similar behavior like dielectric constant. The complex impedance analysis has been used to study the effect of grain and grain boundary on the electrical properties and with Li content both grain and grain boundary resistance show an increasing trend. The ac conductivity shows frequency independent behavior at the low frequency side and with

Kinetics of degradation of sulfur mustard and sarin simulants on HKUST-1 metal organic framework.

Science.gov (United States)

Roy, Anuradha; Srivastava, Avanish K; Singh, Beer; Shah, Dilip; Mahato, Timir Haran; Srivastava, Anchal

2012-10-28

The applicability of HKUST-1 for the degradation of sulfur mustard and sarin simulants was studied with and without coadsorbed water. Degradation was found to be via hydrolysis and dependent on the nucleophilic substitution reaction, vapour pressure and molecular diameter of the toxicants.

Biodiesel de soja: reação de transesterificação para aulas práticas de química orgânica Biodiesel from soybean oil: experimental procedure of transesterification for organic chemistry laboratories

Directory of Open Access Journals (Sweden)

Regina Geris

2007-10-01

Full Text Available The transesterification procedure of triacylglycerides from soybean oil (in natura and waste oil to give biodiesel was adapted to semi-micro laboratory scale as an additional experimental technique of nucleophilic acyl substitution for undergraduate courses in Chemistry and related areas.

Electronic structure and magnetism of titanium substituted Cd3P2: An ab-initio study

Science.gov (United States)

Jaiganesh, G.; Jaya, S. Mathi

2018-05-01

Using the ab-initio computations that are based on the density functional theory, we have investigated the magnetism and electronic properties of one and two Ti atom substituted Cd3P2 compound. The magnetic stability of the substituted compounds was obtained by analyzing the minimum total energies in nonmagnetic, ferromagnetic and antiferromagnetic phases. Our results indicated the formation of magnetic order in one and two Ti atom substituted Cd3P2 as well as metallic characteristics in these systems. A significant value of the magnetic moment of Ti atom is observed from our calculations. We further find that the neighboring Cd and P atoms too acquire a small magnetic moment.

Magnesium substitution in carbonated hydroxyapatite: Structural and microstructural characterization by Rietveld's refinement

Energy Technology Data Exchange (ETDEWEB)

Lala, S. [Materials Science Division, Department of Physics, The University of Burdwan, Golapbag, Burdwan 713104, West Bengal (India); Ghosh, M.; Das, P.K. [Department of Biological Chemistry, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Das, D. [UGC-DAE Consortium for Scientific Research, Kolkata 700098 (India); Kar, T. [Department of Materials Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700032 (India); Pradhan, S.K., E-mail: skpradhan@phys.buruniv.ac.in [Materials Science Division, Department of Physics, The University of Burdwan, Golapbag, Burdwan 713104, West Bengal (India)

2016-02-15

Four stoichiometric compositions of nanocrystalline Mg doped carbonated hydroxyapatite (cHAp) powders are synthesized by mechanical alloying (ball milling) the powder mixtures of CaCO{sub 3}, CaHPO{sub 4}.2H{sub 2}O and MgO in open air at room temperature. FTIR analysis confirms the A-type carbonation in all milled HAp powder samples (A-cHAp). Microstructure characterization in terms of lattice imperfections and phase quantification of ball milled samples are made by analyzing XRD patterns employing Rietveld's structure refinement method. Transmission electron microscopy (TEM) study of 15 mol % Mg doped A-cHAp sample reveals microstructure similar to that obtained from XRD pattern analysis. Cumulative effect of Mg substitution and mechanical alloying results in amorphization of a major part of crystalline A-cHAp, analogous to native bone mineral. Rietveld analysis reveals that the Ca2 vacancy site is energetically more favorable for occupation of Mg substitution. MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay test reveals sufficiently high percentage cell viability confirming the cytocompatibility of the sample. - Graphical abstract: Mg substitution for Ca2 site. - Highlights: • Single phase Mg doped A-cHAp synthesized by mechanical alloying (MA). • FTIR analysis confirms A-type carbonation in HAp. • Amorphization of a part of crystalline A-cHAp due to MA and Mg insertion. • Mg{sup 2+} ions substitute the Ca2 vacancy site. • High cell viability under MTT assay.

Pressure-induced polymerization in substituted acetylenes

Energy Technology Data Exchange (ETDEWEB)

Chellappa, Raja S.; Dattelbaum, Dana M.; Sheffield, Stephen; Robbins, David (LANL)

2012-04-10

A fundamental understanding of shock-induced chemical reactions in organics is still lacking and there are limited studies devoted to determining reaction mechanisms, evolution of bonding, and effect of functional group substitutions. The fast timescale of reactions occurring during shock compression create significant experimental challenges (diagnostics) to fully quantify the mechanisms involved. Static compression combined with temperature provides a complementary route to investigate the equilibrium phase space and metastable intermediates under extreme P-T conditions. In this study, we present our results from our ongoing high pressure in situ synchrotron x-ray diffraction experiments on substituted acetylenes: tert-butyl acetylene [TBA: (CH{sub 3}){sub 3}-C=CH] and ethynyl trimethylsilane [ETMS: (CH{sub 3}){sub 3}-SiC=CH]. We observed that the onset pressure of chemical reactions (at room temperature) in these compounds is higher under static compression (TBA: 12 GPa and ETMS: 17.6 GPa) when compared to shock input pressures (TBA: 6.1 GPa and ETMS: 6.6 GPa). At elevated temperatures, reactivity was observed to occur at pressures comparable to shock conditions. The products were polymeric in nature, recovered to ambient conditions with little degradation.

UV-sensitivity of bromodeoxyuridine (BUdR)-substituted chromosomes in Chinese hamster cells

International Nuclear Information System (INIS)

Antoshchina, M.M.; Luchnik, N.V.

1990-01-01

Chinese hamster cells with chromosomes differently substituted for BUdR (TT-TT, TT-TB, TB-TB, TB-BB, where T is thymidine containing chromatid and B is BUdR substituted chromatid) were exposed to UV-light in phase G 2 and chromosome aberrations (mainly chromatid breaks) were analysed. Breaks frequency per chromosome was proportional to BUdR content. No breaks were found in TT-TT chromosomes. The frequency of breaks per TB chromatid was similar with TT-TB and TB-BB chromosomes. In TB-BB chromosomes, however, virtually no breaks occured in TB chromatids whereas in BB chromatids, their frequency was much higher than was expected

Electricity/oil substitution

International Nuclear Information System (INIS)

Melvin, J.G.

1980-09-01

The extent to which electricity could substitute for imported oil in Canada is assessed and it is concluded that the bulk of projected oil imports could be displaced. This substitution of electricity for oil could be largely completed within two decades, with existing technology, using Canadian resources. The substitution of electricity for imported oil would result in relatively low energy costs and would stimulate economic growth. Energy self-sufficiency through the substitution of electricity for oil is uniquely a Canadian option; it is not open to other industrial countries. The option exists because of Canada's resources of oil sands for essential liquid fuels, hydraulic and nuclear electrical potential, and natural gas as an interim source of energy. While other countries face an energy crisis due to declining supplies of oil, Canada faces opportunities. The policies of Federal and Provincial governments, as perceived by individual decision makers, will have a major influence on Canada's ability to realize opportunities. (auth)

Kinetics and Mechanism of the Pyridinolysis of Diisopropyl Chlorothiophosphate in Acetonitrile

Energy Technology Data Exchange (ETDEWEB)

Hoque, Md. Ehtesham Ul; Lee, Hai Whang [Inha Univ., Incheon (Korea, Republic of)

2012-10-15

The nucleophilic substitution reactions of diisopropyl chlorothiophosphate with X-pyridines have been kinetically studied in MeCN at 35.0 .deg. C. The Hammett and Bronsted plots for the substituent X variations in the nucleophiles show biphasic concave upwards with a break point at X = 3-Ph. The pyridinolysis rate of 5 exhibits great negative deviation from the Taft plot. A concerted S{sub N}2 mechanism is proposed involving a change of the attacking direction of the X-pyridines from a frontside attack with the strongly basic pyridines to a backside attack with the weakly basic pyridines.

Comprehensive study of out-of-plane transport properties in BaFe2As2 : Three-dimensional electronic state and effect of chemical substitution

Science.gov (United States)

Nakajima, M.; Nagafuchi, M.; Tajima, S.

2018-03-01

We investigated the out-of-plane transport properties of parent and chemically substituted BaFe2As2 for various types of substitution. Based on the studies of the Hall coefficient and chemical-substitution effect, we have clarified the origin for the unusual temperature dependence of out-of-plane resistivity ρc(T ) in the high-temperature paramagnetic-tetragonal phase. Electron (hole) carriers have an incoherent (coherent) character, which is responsible for nonmetallic (metallic) ρc(T ) . Although the electron and hole contributions are almost comparable, a slightly larger contribution comes from electrons at high temperatures but from holes at low temperatures, resulting in a maximum in ρc(T ) . In the low-temperature antiferromagnetic-orthorhombic phase, the major effect of substitution is to increase the residual-resistivity component, as in the case for the in-plane transport. In particular, Co atoms substituted for Fe give rise to strong scattering with large ac anisotropy. We found that K substitution induces a nonmetallic behavior in ρc(T ) at low temperatures, which is likely due to a weakly localized nature along the c -axis direction.

Mössbauer spectral studies of Ti{sup 4+} substituted nickel ferrite

Energy Technology Data Exchange (ETDEWEB)

Kale, C.M., E-mail: cmk1973@rediffmail.com [Department of Physics, Indraraj Art, Commerce, and Science College, Sillod, Aurangabad (India); Bardapurkar, P.P. [S.N. Arts, D.J. Malpani Commerce and B.N. Sarda Science College, Sangamner (India); Shukla, S.J. [Department of Physics, P.G. Research Centre, Deogiri College, Aurangabad (India); Jadhav, K.M. [Department of Physics, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad 431001, M.S. (India)

2013-04-15

Polycrystalline ferrites with general formula Ni{sub 1+x}Ti{sub x}Fe{sub 2−2x}O{sub 4}, where 0.0≤x≤0.7 were prepared through double sintering ceramic technique using A.R. grade oxides of respective ions. The phase purity of all the samples was checked by X-ray diffraction (XRD) technique. The X-ray diffraction pattern shows all reflections belonging to cubic spinel structure. No extra peak other than cubic spinel was observed in the X-ray diffraction pattern. Using XRD data, the lattice constant was calculated for all the compositions. The lattice constant decreases linearly with Ti{sup 4+} substitutions and obeys Vegard's law. The magnetic properties (saturation magnetization, magneton number, coercivity) were investigated using pulse field hysteresis loop technique at room temperature. The values of coercivity decreases with Ti{sup 4+} content increases. The saturation magnetization and magneton number both significantly decreases with increase in Ti{sup 4+} substitution. Mössbauer spectra of all the samples exhibit sextet. The Mössbauer parameters obtained from Mössbauer spectrum revealed the influence of titanium substitution. -- Highlights: ► XRD synthesis of Ti{sup 4+} substituted spinel structure. ► Non-magnetic Ti{sup 4+} substitution is much effective on magnetic properties. ► Mössbauer spectrum at room temperature influence on hyperfine field for both (A) and [B] sites. ► Zeeman pattern with small isomer shift exhibits small hyperfine field.

Polymethylated [Fe(eta(6)-arene)(2)](2+) dications: methyl-group rearrangements and application of the EINS mechanism

Czech Academy of Sciences Publication Activity Database

Štíbr, Bohumil; Bakardjiev, Mario; Hájková, Zuzana; Holub, Josef; Padělková, Z.; Růžička, A.; Kennedy, J.D.

2011-01-01

Roč. 40, č. 22 (2011), s. 5916-5920 ISSN 1477-9226 R&D Projects: GA MŠk LC523 Institutional research plan: CEZ:AV0Z40320502 Keywords : electrophile-induced nucleophilic substitution Subject RIV: CA - Inorganic Chemistry Impact factor: 3.838, year: 2011

Evaluation of substitution monopole models for tire noise sound synthesis

Science.gov (United States)

Berckmans, D.; Kindt, P.; Sas, P.; Desmet, W.

2010-01-01

Due to the considerable efforts in engine noise reduction, tire noise has become one of the major sources of passenger car noise nowadays and the demand for accurate prediction models is high. A rolling tire is therefore experimentally characterized by means of the substitution monopole technique, suiting a general sound synthesis approach with a focus on perceived sound quality. The running tire is substituted by a monopole distribution covering the static tire. All monopoles have mutual phase relationships and a well-defined volume velocity distribution which is derived by means of the airborne source quantification technique; i.e. by combining static transfer function measurements with operating indicator pressure measurements close to the rolling tire. Models with varying numbers/locations of monopoles are discussed and the application of different regularization techniques is evaluated.

Composition-driven enhanced magnetic properties and magnetoelectric coupling in Gd substituted BiFeO{sub 3} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Vijayasundaram, S.V., E-mail: vijayasundaramsv@gmail.com [Department of Physics, Presidency College, Chennai 600005 (India); Suresh, G. [Department of Physics, Park College of Engineering and Technology, Coimbatore 641659 (India); Department of Urology, Singapore General Hospital, Singapore 169856 (Singapore); Mondal, R.A. [Department of Physics, Hindustan University, Chennai 603103 (India); Kanagadurai, R. [Department of Physics, Presidency College, Chennai 600005 (India)

2016-11-15

Bi{sub 1-x}Gd{sub x}FeO{sub 3} (x=0, 0.05 and 0.1) samples were synthesized by modified sol–gel process. X-ray diffraction studies confirmed that the crystal structures of Gd substituted samples remain stable for x<0.1, while compositional-driven structural phase transition from rhombohedral to orthorhombic was observed in the case of x=0.1. The average particle sizes of pure and Gd substituted BiFeO{sub 3} nanoparticles were found to be in the range 62–46 nm. The size of the oblate spherical particles decreased with increasing Gd concentration. XPS studies revealed the trivalent oxidation states of Bi and Fe ions along with sample purity. Pure BiFeO{sub 3} exhibited linear M–H loop indicating its antiferromagnetic characteristics, whereas obvious non-linear M–H loops were observed in Gd substituted samples. In contrast to the observed room temperature magnetization (0.36 emu/g) under 40 kOe for BiFeO{sub 3}, the sample with 10% Gd exhibited appreciable enhancement of magnetization (1.88 emu/g). A leaky type P–E hysteresis loop was observed for the pure one, whereas concave-like ferroelectric loops were obtained for Gd substituted samples. The possible origins of enhanced multiferroic properties have been explained on the basis of substituent, its concentration, phase purity, particle size, structural distortion and the modified magnetic structure. The measurement of magnetoelectric studies at room temperature revealed the coupling between magnetic and ferroelectric ordering, which is desirable for multifunctional device applications of multiferroics. - Highlights: • The substitution of Gd in BiFeO{sub 3} (BFO) nanoparticles led to structural distortion. • Average sizes of the substituted samples are less than the spin period of BFO. • Gd-substitution altered the original magnetic structure of BFO (AFM – FM). • M{sub r} of a substituted sample is an order of magnitude higher than that of BFO. • All the samples show magnetoelectric coupling

Approaches in Substitution of Organic Solvents

DEFF Research Database (Denmark)

Jacobsen, Thomas

2000-01-01

In substitution of harmful chemicals or products with less harmful or harmless ones, there are different approaches according to the different situations, the technical requirements to the substitutes, and the goals for the substitution. Three different cases are presented. The substitution process...

Real-space calculations of nonspherically averaged charge densities for substitutionally disordered alloys

International Nuclear Information System (INIS)

Singh, P.P.; Gonis, A.

1993-01-01

Based on screening transformations of muffin-tin orbitals introduced by Andersen and Jepsen [Phys. Rev. Lett. 53, 2571 (1984)], we have developed a formalism for calculating the nonspherically averaged charge densities of substitutionally disordered alloys using the Korringa-Kohn-Rostoker coherent-potential-approximation (KKR CPA) method in the atomic-sphere approximation (ASA). We have validated our method by calculating charge densities for ordered structures, where we find that our approach yields charge densities that are essentially indistinguishable from the results of full-potential methods. Calculations and comparisons are reported for Si, Al, and Li. For substitutionally disordered alloys, where full-potential methods have not been implemented so far, our approach can be used to calculate reliable nonspherically averaged charge densities from spherically symmetric one-electron potentials obtained from the KKR-ASA CPA. We report on our study of differences in charge density between ordered AlLi in the L1 0 phase and substitutionally disordered Al 0.5 Li 0.5 on a face-centered-cubic lattice

2-Bromo-1,4-naphthoquinone: a potentially improved substitute of menadione in Apatone™ therapy

Energy Technology Data Exchange (ETDEWEB)

Graciani, F.S.; Ximenes, V.F. [Departamento de Química, Faculdade de Ciências, Universidade Estadual Paulista, Bauru SP (Brazil); Departamento de Análises Clínicas, Faculdade de Ciências Farmacêuticas, Universidade Estadual Paulista, Araraquara SP (Brazil)

2012-05-18

Apatone™, a combination of menadione (2-methyl-1,4-naphthoquinone, VK{sub 3}) and ascorbic acid (vitamin C, VC) is a new strategy for cancer treatment. Part of its effect on tumor cells is related to the cellular pro-oxidative imbalance provoked by the generation of hydrogen peroxide (H{sub 2}O{sub 2}) through naphthoquinone redox cycling. In this study, we attempted to find new naphthoquinone derivatives that would increase the efficiency of H{sub 2}O{sub 2} production, thereby potentially increasing its efficacy for cancer treatment. The presence of an electron-withdrawing group in the naphthoquinone moiety had a direct effect on the efficiency of H{sub 2}O{sub 2} production. The compound 2-bromo-1,4-naphthoquinone (BrQ), in which the bromine atom substituted the methyl group in VK{sub 3}, was approximately 10- and 19-fold more efficient than VK{sub 3} in terms of oxygen consumption and H{sub 2}O{sub 2} production, respectively. The ratio [H{sub 2}O{sub 2}]{sub produced} / [naphthoquinone]{sub consumed} was 68 ± 11 and 5.8 ± 0.2 (µM/µM) for BrQ and VK{sub 3}, respectively, indicating a higher efficacy of BrQ as a catalyst for the autoxidation of ascorbic acid. Both VK{sub 3} and BrQ reacted with glutathione (GSH), but BrQ was the more effective substrate. Part of GSH was incorporated into the naphthoquinone, producing a nucleophilic substitution product (Q-SG). The depletion of BrQ by GSH did not prevent its redox capacity since Q-SG was also able to catalyze the production of reactive oxygen species. VK{sub 3}/VC has already been submitted to clinical trials for the treatment of prostate cancer and has demonstrated promising results. However, replacement of VK{sub 3} with BrQ will open new lines of investigation regarding this approach to cancer treatment.

Electronic structure theory of alloy phase stability

International Nuclear Information System (INIS)

Turchi, P.E.A.; Sluiter, M.

1992-01-01

We present a brief overview of the advanced methodology which has been developed and applied to the study of phase stability properties in substitutional alloys. The approach is based on the real space version of the Generalized Perturbation Method within the Korringa-Kohn-Rostoker multiple scattering formulation of the Coherent Potential Approximation. Temperature effects are taken into account with a generalized meanfield approach, namely the Cluster Variation Method, or with Monte-Carlo simulations. We show that this approach is well suited for studying ground state properties of substitutional alloys, for calculating energies of idealized interfaces and antiphase boundaries, and finally to compute alloy phase diagrams

X-Ray Absorption Spectroscopy of Fe-Substituted Allophane and Imogolite

Science.gov (United States)

Baker, L. L.; Strawn, D. G.; Nickerson, R. D.; McDaniel, P.

2011-12-01

Martian rocks and sediments contain weathering products including clay minerals formed as a result of interaction between rocks and water, and these materials can act as important indicators of past surface conditions on Mars. Weathering of terrestrial volcanic rocks similar to those on Mars produces nano-sized, variably hydrated aluminosilicate and iron oxide minerals, including allophane, imogolite, halloysite, hisingerite, and ferrihydrite. The nanoaluminosilicates can contain isomorphically substituted Fe, which may affect their spectral and physical properties as well as their eventual recrystallization products. Detection and quantification of such minerals in natural environments on Earth is difficult due to their variable chemical composition and lack of long-range crystalline order. Their accurate detection and quantification on Mars requires a better understanding of how composition affects their spectral properties and evolution to more crystalline phases. Aluminosilicate nanoparticles of varying composition were synthesized with isomorphically substituted Fe at Fe:Al ratios of 1:100. Allophanes were synthesized with Al:Si ratios of 2:1, 1:1, and 1:3. The substituted Fe was probed using Fe K-edge X-ray absorption fine structure spectroscopy (XAFS). The XAFS spectrum contains information about the molecular environment surrounding the target atom, and is an ideal technique for studying poorly crystalline materials that are difficult to characterize using bulk methods such as XRD. The near-edge (XANES) and extended (EXAFS) portions of the XAFS spectrum were examined, and allophane backscattering paths were fit using coordinates for a modified nanoball model (1). XANES spectra rule out ferrihydrite in the synthetic samples, suggesting all Fe was incorporated into the aluminosilicate structure. The XAFS results suggest that Fe substituted into the allophane structure is present as Fe(III) in octahedral coordination in a well-ordered sheet. Some Fe

Medicineringsfejl ved generisk substitution

DEFF Research Database (Denmark)

Rölfing, Jan

2012-01-01

Generic substitution is a major cause of medical mistakes in the general population. Danish legislation obligates pharmacies to substitute prescribed medicine with the cheapest equivalent formulation, despite variations in product name, packaging, shape and colour. Consequently, medical mistakes...... occur. Scientific evidence on the consequences of generic substitution is sparse. Call upon fellow health workers to report medical mistakes to the national entities and scientific peers, in order to increase awareness and scientific evidence about the problem....

Mechanism of Oxidative Amidation of Nitroalkanes with Oxygen and Amine Nucleophiles by Using Electrophilic Iodine.

Science.gov (United States)

Li, Jing; Lear, Martin J; Kwon, Eunsang; Hayashi, Yujiro

2016-04-11

Recently, we developed a direct method to oxidatively convert primary nitroalkanes into amides that entailed mixing an iodonium source with an amine, base, and oxygen. Herein, we systematically investigated the mechanism and likely intermediates of such methods. We conclude that an amine-iodonium complex first forms through N-halogen bonding. This complex reacts with aci-nitronates to give both α-iodo- and α,α-diiodonitroalkanes, which can act as alternative sources of electrophilic iodine and also generate an extra equimolar amount of I(+) under O2. In particular, evidence supports α,α-diiodonitroalkane intermediates reacting with molecular oxygen to form a peroxy adduct; alternatively, these tetrahedral intermediates rearrange anaerobically to form a cleavable nitrite ester. In either case, activated esters are proposed to form that eventually reacts with nucleophilic amines in a traditional fashion. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High-temperature resistivity and thermoelectric properties of coupled substituted Ca3Co2O6

Directory of Open Access Journals (Sweden)

Meenakshisundaram Senthilkumar and Rajagopalan Vijayaraghavan

2009-01-01

Full Text Available Polycrystalline samples of Ca3−xNaxCo2−xMnxO6 (x=0.0–0.5 have been prepared by the sol-gel cum combustion method using sucrose in order to investigate the effects of the coupled substitution of Na and Mn on Ca and Co sites on the transport properties of Ca3Co2O6(Co326. The products were characterized by Fourier transform infrared spectroscopy, powder x-ray diffraction (XRD, thermogravimetry (TGA, differential thermal analysis and scanning electron microscopy. XRD patterns reveal the formation of single-phase products up to x=0.5. Coupled substitution increases the solubility of both Na and Mn on Ca and Co sites, respectively, in contrast to the limited solubility of Na and Mn (x=0.2 when separately substituted. TGA confirms the formation of the Ca3Co2O6 phase at temperatures ~720 °C. The grain size of the parent and substituted products is in the range 150–250 nm. Electrical resistivity and Seebeck coefficient were measured in the temperature range 300–800 K. Resistivity shows semiconducting behavior for all the compositions, particularly in the low-temperature regime. The Seebeck coefficient increases with temperature throughout the measured temperature range for all compositions. The maximum Seebeck coefficient (200 μV K−1 is observed for x=0.5 at 825 K, and this composition may be optimal for high-temperature thermoelectric applications.

Untitled

Indian Academy of Sciences (India)

been calculated. The Brönsted type correlation is fair, and the B value has been determined,. Keywords. Ethyl bromoacetate; substituted aliphatic carboxylate ions; multi-parameter equations; substituent effect; Brönsted relationship. 1. Introduction. Although a number of kinetic studies have been reported on the nucleophilic.

Structural, morphological and magnetic properties variation of nickel-manganese ferrites with lithium substitution

Energy Technology Data Exchange (ETDEWEB)

Momin, A.A., E-mail: abdulla.al.momin@gmail.com; Parvin, Roksana; Akther Hossain, A.K.M.

2017-02-01

Mixed ferrites with nominal chemical compositions Li{sub x}Ni{sub 0.2}Mn{sub 0.8−2x}Fe{sub 2+x}O{sub 4} ranging from x=0 to 0.4 in the steps of 0.1 have been prepared by the auto combustion technique. The X-ray diffraction patterns consist of major cubic spinel Li{sub x}Ni{sub 0.2}Mn{sub 0.8−2x}Fe{sub 2+x}O{sub 4} phase with minor impurity phases (Fe{sub 2}O{sub 3} and MnO) and with Li substitution phase purity has increased, such that for x=0.4 pure phase spinel structure has been obtained. The lattice parameter has decreased with the increase in Li content obeying Vegard’s law. Both the bulk density and theoretical density have decreased with Li content and with sintering temperature (T{sub s}) up to 1300 °C ρ{sub B} has increased and beyond that it has decreased. Morphological studies have performed by a high resolution optical microscope and observed that average grain size noticeably dependent on Li substitution. The initial permeability (μ{sub i}′′) has found to decrease with Li substitution. The Curie temperature (T{sub C}) has determined from the temperature dependent μ{sub i}′′ and found to increases with Li content. From the room temperature magnetization measurement, it has observed that all samples are in ferrimagnetic state at room temperature. The number of Bohr magneton has been obtained from the observed saturation magnetization. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance are studied in the frequency range 20 Hz–10 MHz. Frequency dependence of dielectric constant in lower frequencies indicates a usual dielectric dispersion due to the Maxwell-Wagner type interfacial polarization. Dielectric loss tangent shows similar behavior like dielectric constant. The complex impedance analysis has been used to study the effect of grain and grain boundary on the electrical properties and with Li content both grain and grain boundary resistance show an increasing trend. The ac conductivity shows

Effect of Semiconductor Element Substitution on the Electric Properties of Barium Titanate Ceramics

Directory of Open Access Journals (Sweden)

Garbarz-Glos B.

2016-06-01

Full Text Available The investigated ceramics were prepared by a solid-state reaction from simple oxides and carbonates with the use of a mixed oxide method (MOM. The morphology of BaTi0.96Si0.04O3 (BTSi04 ceramics was characterised by means of a scanning electron microscopy (SEM. It was found that Si+4 ion substitution supported the grain growth process in BT-based ceramics. The EDS results confirmed the high purity and expected quantitative composition of the synthesized material. The dielectric properties of the ceramics were also determined within the temperature range (ΔT=130-500K. It was found that the substitution of Si+4 ions had a significant influence on temperature behavior of the real (ε’ and imaginary (ε” parts of electric permittivity as well as the temperature dependence of a.c. conductivity. Temperature regions of PTCR effect (positive temperature coefficient of resistivity were determined for BTSi04 ceramics in the vicinity of structural phase transitions typical for barium titanate. No distinct maximum indicating a low-temperature structural transition to a rhombohedral phase in BTSi04 was found. The activation energy of conductivity was determined from the Arrhenius plots. It was found that substitution of Si ions in amount of 4wt.% caused almost 50% decrease in an activation energy value.

Additivity methods for prediction of thermochemical properties. The Laidler method revisited. 2. Hydrocarbons including substituted cyclic compounds

International Nuclear Information System (INIS)

Santos, Rui C.; Leal, Joao P.; Martinho Simoes, Jose A.

2009-01-01

A revised parameterization of the extended Laidler method for predicting standard molar enthalpies of atomization and standard molar enthalpies of formation at T = 298.15 K for several families of hydrocarbons (alkanes, alkenes, alkynes, polyenes, poly-ynes, cycloalkanes, substituted cycloalkanes, cycloalkenes, substituted cycloalkenes, benzene derivatives, and bi and polyphenyls) is presented. Data for a total of 265 gas-phase and 242 liquid-phase compounds were used for the calculation of the parameters. Comparison of the experimental values with those obtained using the additive scheme led to an average absolute difference of 0.73 kJ . mol -1 for the gas-phase standard molar enthalpy of formation and 0.79 kJ . mol -1 for the liquid-phase standard molar enthalpy of formation. The database used to establish the parameters was carefully reviewed by using, whenever possible, the original publications. A worksheet to simplify the calculation of standard molar enthalpies of formation and standard molar enthalpies of atomization at T = 298.15 K based on the extended Laidler parameters defined in this paper is provided as supplementary material.

Solvent substitution

International Nuclear Information System (INIS)

1990-01-01

The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general ''Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated

On the effect of heterovalent substitutions in ruthenocuprates

Energy Technology Data Exchange (ETDEWEB)

Klamut, P.W.; Dabrowski, B.; Mini, S.M.; Maxwell, M.; Mais, J.; Felner, I.; Asaf, U.; Ritter, F.; Shengelaya, A.; Khasanov, R.; Savic, I.M.; Keller, H.; Wisniewski, A.; Puzniak, R.; Fita, I.M.; Sulkowski, C.; Matusiak, M

2003-05-01

We discuss the properties of superconducting derivatives of the RuSr{sub 2}GdCu{sub 2}O{sub 8} (1212-type) ruthenocuprate, for which heterovalent doping has been achieved through partial substitution of Cu ions into the RuO{sub 2} planes (Ru{sub 1-x}Sr{sub 2}GdCu{sub 2+x}O{sub 8-{delta}}, 0{<=}x{<=}0.75, T{sub c}{sup max}=72 K for x=0.3-0.4) and Ce ions into the Gd sites (RuSr{sub 2}Gd{sub 1-y}Ce{sub y}Cu{sub 2}O{sub 8}, 0{<=}y{<=}0.1). The measurements of XANES, thermopower, and magnetization under external pressure reveal an underdoped character of all compounds. Muon spin rotation experiments indicate the presence of magnetic order at low temperatures (T{sub m}=14-2 K for x=0.1-0.4). Properties of these two series lead us to the qualitative phase diagram for differently doped 1212-type ruthenocuprates. The difference in temperature of magnetic ordering found for superconducting and non-superconducting RuSr{sub 2}GdCu{sub 2}O{sub 8} is discussed in the context of the properties of substituted compounds. The high pressure oxygen conditions required for synthesis of Ru{sub 1-x}Sr{sub 2}RECu{sub 2+x}O{sub 8-{delta}}, have been extended to synthesis of a Ru{sub 1-x}Sr{sub 2}Eu{sub 2-y}Ce{sub y}Cu{sub 2+x}O{sub 10-{delta}} series. The Cu {yields} Ru doping achieved in these phases is found to decrease the temperature for magnetic ordering as well the volume fraction of the magnetic phase.

A DFT study of solvation effects and NBO analysis on the tautomerism of 1-substituted hydantoin

Directory of Open Access Journals (Sweden)

Meisam Shabanian

2016-09-01

Full Text Available 1-Substituted hydantoins (1-SH have been known as a benefit intermediate for producing agricultural and pharmaceuticals. The effect of solvent polarity on the tautomeric equilibria of 1-substituted hydantoin ring is studied by the density functional theory calculation (B3LYP/6–31++G(d,p level for predominant tautomeric forms of hydantoin derivatives (1-NO2, 1-CF3, 1-Br, 1-H, 1-CHCH2, 1-OH, 1-CH3 in the gas phase and selected solvents (benzene (non-polar solvent, tetrahydrofuran (THF (polar aprotic solvent and water (protic solvent. For electron withdrawing and releasing derivatives in the gas phase and solution Hy1 forms is more stable and dominant form. In addition variation of dipole moments and charges on atoms in the solvents are studied.

On isomorphous substitution of calcium by sodium and lanthanum in synthetic hydroxyapatite

International Nuclear Information System (INIS)

Get'man, E.I.; Kanyuka, Yu.V.; Loboda, S.N.

1998-01-01

Isomorphous substitution of calcium by sodium and lanthanum in synthetic hydroxyapatite Ca 5-2x La x (PO 4 ) 3 OH by x=0-2.5 within the temperature range 1100-800 deg C is studied through the roentgenophase analysis and IR-spectroscopy methods. It is established that singlephase solid solutions are formed in the area of x≥0.4 by a≤0.4 there exist phases with LaPO 4 , LaNa 6 (PO 4 ) 3 structures and unknown phase along with solid solution of the apatite structure

Structural and magnetic study of dysprosium substituted cobalt ferrite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Kumar, Hemaunt, E-mail: hvatsal@gmail.com [Department of Physics, Govind Ballabh Pant University of Agr. & Technology, Pantnagar, Uttarakhand 263145 (India); Srivastava, R.C. [Department of Physics, Govind Ballabh Pant University of Agr. & Technology, Pantnagar, Uttarakhand 263145 (India); Pal Singh, Jitendra [Advanced Analysis Centre, Korea Institute of Science and Technology, Seoul 02792 (Korea, Republic of); Negi, P. [Department of Physics, Govind Ballabh Pant University of Agr. & Technology, Pantnagar, Uttarakhand 263145 (India); Agrawal, H.M. [Advanced Analysis Centre, Korea Institute of Science and Technology, Seoul 02792 (Korea, Republic of); Das, D. [UGC-DAE CSR Kolkata Centre, Kolkata 700098 (India); Hwa Chae, Keun [Advanced Analysis Centre, Korea Institute of Science and Technology, Seoul 02792 (Korea, Republic of)

2016-03-01

The present work investigates the magnetic behavior of Dy{sup 3+} substituted cobalt ferrite nanoparticles. X-ray diffraction studies reveal presence of cubic spinel phases in these nanoparticles. Raman spectra of these nanoparticles show change in intensity of Raman bands, which reflects cation redistribution in cubic spinel lattice. Saturation magnetization and coercivity decrease with increase of Dy{sup 3+}concentration in these nanoparticles. Room temperature Mössbauer measurements show the cation redistribution in these nanoparticles and corroborates the results obtained from Raman Spectroscopic measurements. Decrease in magnetization of Dy{sup 3+} substituted cobalt ferrite is attributed to the reduction in the magnetic interaction and cation redistribution. - Highlights: • Slight decrease in crystallite size after Dy{sup 3+} doping. • Saturation magnetization and coercivity decrease after Dy{sup 3+} doping. • Mössbauer measurements show the cation redistribution in the samples.

Use of fluorine-18 free of carrier for the synthesis of 2-[{sup 18} F]-fluoro-2-deoxy-d-glucose by nucleophilic substitution; Uso del fluor-18 libre de portador para la sintesis de la 2-[{sup 18} F]-fluoro-2-deoxi-d-glucosa por sustitucion nucleofilica

Energy Technology Data Exchange (ETDEWEB)

Garcia S, I; Ramirez, F M

1990-11-15

Preliminary studies on the synthesis of 2 - [{sup 18} F]-fluoro-2-deoxy-d-glucose (2 - [{sup 18} F]-FDG) were carried out by means of the nucleophilic method proposed by K. Hamacher and the {sup 18} F obtained in the Nuclear Reactor TRIGA Mark III of the Nuclear Center of Mexico. For the control of radiochemical quality it was used the chromatography technique in paper and silica gel with 4 solvent systems. The identification of the marked species with {sup 18} F was carried out by means of comparison of its Rf with the Rf of the obtained not radioactive species, using the same synthesis method. (Author)

Reaction of singlet-excited 2,3-diazabicyclo[2.2.2]oct-2-ene and tert-butoxyl radicals with aryl-substituted benzofuranones.

Science.gov (United States)

Lundgren, Cecilia Vannesjö; Koner, Apurba L; Tinkl, Michael; Pischel, Uwe; Nau, Werner M

2006-03-03

5,7-Di-tert-butyl-3-aryl-3H-benzofuran-2-ones are lactones with potential antioxidant activity, owing to their abstractable benzylic C-H hydrogens. The fluorescence quenching of the azoalkane 2,3-diazabicyclo[2.2.2]oct-2-ene (DBO), an established probe for the hydrogen-donor propensity of chain-breaking antioxidants, was investigated for 16 aryl-substituted benzofuranone derivatives [m,m-(CF3)2, p-CN, m-CN, p-CF3, p-COOCH3, m-CF3, p-Cl, p-F, H, m-CH3, p-CH3, m,p-(CH3)2, p-OCH3, o-CH3, o-CF3, o,m-(CH3)2]. Analysis of the rate data in terms of a linear free energy relationship yielded a reaction constant of rho = +0.35. This implies that n,pi*-excited DBO acts as nucleophilic species. In contrast, hydrogen abstraction of tert-butoxyl radicals from the benzofuranones was accelerated by electron-donating substituents (rho = -0.23), in conformity with the electrophilic character of oxygen-centered alkoxyl radicals. Possible implications for the optimization of the hydrogen-donor propensity of antioxidants through structural variation are discussed.

Decabromodiphenyl Ether (DecaBDE) in Electrical and Electronic Equipment in Japan: Stock, Emission, and Substitution Evaluation.

Science.gov (United States)

Xue, Mianqiang; Zhou, Liang; Kojima, Naoya; Machimura, Takashi; Tokai, Akihiro

2017-11-21

DecaBDE has been widely used as flame retardant in electrical and electronic equipment (EEE). It has recently been listed in Annex A of the Stockholm Convention. The time series flow, stock, and emission of DecaBDE in EEE in Japan were quantified. On this basis, a risk/risk trade-off analysis of substituting DecaBDE with triphenyl phosphate (TPhP) that is one possible phosphorus-based alternative was conducted. The stock of DecaBDE reached a maximum of ∼42 000 t in 1995. Even though the demand flow was negligible in 2030, the stock was modeled to be still ∼470 t. The outflow of DecaBDE, from the use phase to the disposal phase, peaked at ∼4500 t/yr. in 2001. The DecaBDE emission to atmosphere was mainly derived from the production phase before 1990. The use phase became the largest contributor to the total emission from 1995 to 2000. Whereas the disposal phase dominated the total emission from 2000 onward. In the substitution analysis, a trade-off between human and ecological health effect was revealed in case of replacing DecaBDE with TPhP. This study attempted to give an overall picture of DecaBDE application at national level providing insights into relevant environmental policy making.

40 CFR Appendix D to Subpart G of... - Substitutes Subject to Use Restrictions and Unacceptable Substitutes

Science.gov (United States)

2010-07-01

... the following criteria, derived from Society of Automotive Engineers (SAE) standards and recommended... Substitutes] Application Substitute Decision Conditions Comments Electronics Cleaning w/CFC-113 and MCF HFC... Sector [Acceptable Subject to Narrowed Use Limits] Application Substitute Decision Comments Electronics...

High temperature superconductivity in Zn and Mn substituted (Tl,Cr)Sr2CaCu2O7

International Nuclear Information System (INIS)

Lo, S.V.; Abd Shukor, R.

1999-01-01

Samples with nominal starting composition (TICr 0 .15)Sr 2 (Ca 1-x M x )Cu 2 O 7 (TI-1212) for x=0 - 0.7 with M= Zn and Mn have been prepared and investigated by powder X-ray diffraction (XRD) and electrical resistance measurements. All sample showed a mixed phase of 1212 and 1201. Dominant 1212-phase was observed for x=0.0-0.5 and x=0.0-0.4, for Zn and Mn series, respectively. The superconducting transition temperature was suppressed when Zn and Mn are substituted at the Ca site. For the Zn series the normal state behavior is metallic throughout the doping range. For the Mn series the normal state behavior is metallic for 0.1≤x≥0.3 and semiconducting like x>0.3. The suppression of T c and formation of the TI-1212 phase are discussed in terms of the ionic radius and valence state of the substituted elements. (author)

Effect of La-CO substitution on the crystal structure and magnetic properties of low temperature sintered Sr1-xLaxFe12-xCoxO19 (x=0-0.5) ferrites

Science.gov (United States)

Peng, Long; Li, Lezhong; Wang, Rui; Hu, Yun; Tu, Xiaoqiang; Zhong, Xiaoxi

2015-11-01

The La-Co substituted Sr1-xLaxFe12-xCoxO19 (x=0-0.5) ferrites with appropriate Bi2O3 additive were prepared at a low sintering temperature of 890 °C compatible with LTCC (low temperature co-fired ceramics) systems, and the effect of La-Co substitution on their crystal structure and magnetic properties was investigated. The results show that the pure M-type phase is successfully obtained when the La-Co substitution amount x does not exceed 0.3. However, the single M-type phase structure transforms to multiphase structure with further increased x, where the α-Fe2O3 phase and La2O3 phase coexist with the M-type phase. Moreover, the saturation magnetization Ms, magnetic anisotropy field Ha, intrinsic coercivity Hci, and Curie temperature TC of the ferrites depend on the La-Co substitution amount strongly, which are suggested to be determined by the partially substitution of La3+-Co2+ ions for Sr2+-Fe3+ ions with x not higher than 0.3. It is found that the obtained Sr1-xLaxFe12-xCoxO19 (x=0.2 and 0.3) ferrites can provide improved magnetic properties (Ms>62 emu/g, Ha>1400 kA/m, and Hci>320 kA/m) as low temperature sintered M-type hexaferrites for microwave LTCC applications.

N-Heterocyclic-Carbene-Catalysed Diastereoselective Vinylogous Mukaiyama/Michael Reaction of 2-(Trimethylsilyloxy)furan and Enones

KAUST Repository

Wang, Ying; Du, Guang Fen; Xing, Fen; Huang, Kuo-Wei; Dai, Bin; He, Lin

2015-01-01

N-heterocyclic carbenes have been utilised as highly efficient nucleophilic organocatalysts to mediate vinylogous Mukaiyama/Michael reactions of 2-(trimethylsilyloxy)furan with enones to afford γ-substituted butenolides in 44-99% yield with 3:1-32:1 diastereoselectivity. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

N-Heterocyclic-Carbene-Catalysed Diastereoselective Vinylogous Mukaiyama/Michael Reaction of 2-(Trimethylsilyloxy)furan and Enones

KAUST Repository

Wang, Ying

2015-10-15

N-heterocyclic carbenes have been utilised as highly efficient nucleophilic organocatalysts to mediate vinylogous Mukaiyama/Michael reactions of 2-(trimethylsilyloxy)furan with enones to afford γ-substituted butenolides in 44-99% yield with 3:1-32:1 diastereoselectivity. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Repositioning the catalytic triad aspartic acid of haloalkane dehalogenase : Effects on stability, kinetics, and structure

NARCIS (Netherlands)

Krooshof, Geja H.; Kwant, Edwin M.; Damborský, Jiří; Koča, Jaroslav; Janssen, Dick B.

1997-01-01

Haloalkane dehalogenase (DhlA) catalyzes the hydrolysis of haloalkanes via an alkyl-enzyme intermediate. The covalent intermediate, which is formed by nucleophilic substitution with Asp124, is hydrolyzed by a water molecule that is activated by His289. The role of Asp260, which is the third member

Dehalogenation of Polychlorinated Biphenyls (PCB) by Nucleofile Reactants at the Presence of Ionic Liquids and under Application of Microwaves

Czech Academy of Sciences Publication Activity Database

Kaštánek, P.; Kaštánek, František; Hájek, Milan; Sobek, Jiří; Šolcová, Olga

2011-01-01

Roč. 13, č. 1 (2011), s. 59-64 ISSN 1790-7632 R&D Projects: GA ČR GA104/09/0694 Institutional research plan: CEZ:AV0Z40720504 Keywords : nucleophilic substitution * ionic liqiud * microwaves Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 0.536, year: 2011

Electrostatic Potential Maps and Natural Bond Orbital Analysis: Visualization and Conceptualization of Reactivity in Sanger's Reagent

Science.gov (United States)

Mottishaw, Jeffery D.; Erck, Adam R.; Kramer, Jordan H.; Sun, Haoran; Koppang, Miles

2015-01-01

Frederick Sanger's early work on protein sequencing through the use of colorimetric labeling combined with liquid chromatography involves an important nucleophilic aromatic substitution (S[subscript N]Ar) reaction in which the N-terminus of a protein is tagged with Sanger's reagent. Understanding the inherent differences between this S[subscript…

Optimal ordering quantities for substitutable deteriorating items under joint replenishment with cost of substitution

Science.gov (United States)

Mishra, Vinod Kumar

2017-09-01

In this paper we develop an inventory model, to determine the optimal ordering quantities, for a set of two substitutable deteriorating items. In this inventory model the inventory level of both items depleted due to demands and deterioration and when an item is out of stock, its demands are partially fulfilled by the other item and all unsatisfied demand is lost. Each substituted item incurs a cost of substitution and the demands and deterioration is considered to be deterministic and constant. Items are order jointly in each ordering cycle, to take the advantages of joint replenishment. The problem is formulated and a solution procedure is developed to determine the optimal ordering quantities that minimize the total inventory cost. We provide an extensive numerical and sensitivity analysis to illustrate the effect of different parameter on the model. The key observation on the basis of numerical analysis, there is substantial improvement in the optimal total cost of the inventory model with substitution over without substitution.

Neutron diffraction studies on cobalt substituted BiFeO3

Science.gov (United States)

Ray, J.; Biswal, A. K.; Acharya, S.; Babu, P. D.; Siruguri, V.; Vishwakarma, P. N.

2013-02-01

A dilute concentration of single phase Cobalt substituted Bismuth ferrite, BiFe1-XCoXO3; (x=0, 0.02) is prepared by sol-gel auto combustion method. Room temperature neutron diffraction patterns show no change in the crystal and magnetic structure upon cobalt doping. The calculation of magnetic moments shows 3.848 μB for Fe+ and 2.85 μB for Co3+. The cobalt is found to be in intermediate spin state.

Solvent substitution

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The DOE Environmental Restoration and Waste Management Office of Technology Development and the Air Force Engineering and Services Center convened the First Annual International Workshop on Solvent Substitution on December 4--7, 1990. The primary objectives of this joint effort were to share information and ideas among attendees in order to enhance the development and implementation of required new technologies for the elimination of pollutants associated with industrial use of hazardous and toxic solvents; and to aid in accelerating collaborative efforts and technology transfer between government and industry for solvent substitution. There were workshop sessions focusing on Alternative Technologies, Alternative Solvents, Recovery/Recycling, Low VOC Materials and Treatment for Environmentally Safe Disposal. The 35 invited papers presented covered a wide range of solvent substitution activities including: hardware and weapons production and maintenance, paint stripping, coating applications, printed circuit boards, metal cleaning, metal finishing, manufacturing, compliance monitoring and process control monitoring. This publication includes the majority of these presentations. In addition, in order to further facilitate information exchange and technology transfer, the US Air Force and DOE solicited additional papers under a general Call for Papers.'' These papers, which underwent review and final selection by a peer review committee, are also included in this combined Proceedings/Compendium. For those involved in handling, using or managing hazardous and toxic solvents, this document should prove to be a valuable resource, providing the most up-to-date information on current technologies and practices in solvent substitution. Individual papers are abstracted separated.

Statistical Physics of Complex Substitutive Systems

Science.gov (United States)

Jin, Qing

Diffusion processes are central to human interactions. Despite extensive studies that span multiple disciplines, our knowledge is limited to spreading processes in non-substitutive systems. Yet, a considerable number of ideas, products, and behaviors spread by substitution; to adopt a new one, agents must give up an existing one. This captures the spread of scientific constructs--forcing scientists to choose, for example, a deterministic or probabilistic worldview, as well as the adoption of durable items, such as mobile phones, cars, or homes. In this dissertation, I develop a statistical physics framework to describe, quantify, and understand substitutive systems. By empirically exploring three collected high-resolution datasets pertaining to such systems, I build a mechanistic model describing substitutions, which not only analytically predicts the universal macroscopic phenomenon discovered in the collected datasets, but also accurately captures the trajectories of individual items in a complex substitutive system, demonstrating a high degree of regularity and universality in substitutive systems. I also discuss the origins and insights of the parameters in the substitution model and possible generalization form of the mathematical framework. The systematical study of substitutive systems presented in this dissertation could potentially guide the understanding and prediction of all spreading phenomena driven by substitutions, from electric cars to scientific paradigms, and from renewable energy to new healthy habits.

Transgalactosylation/Hydrolysis Ratios of Various β-Galactosidases Catalyzing Alkyl-β-Galactoside Synthesis in Single-Phased Alcohol Media

Directory of Open Access Journals (Sweden)

Eleonora Winkelhausen

2008-01-01

Full Text Available Three microbial galactosidases, Aspergillus oryzae, Escherichia coli and Kluyveromyces marxianus β-galactosidase, were used as catalysts for transgalactosylation synthesis of alkyl-β-galactosides in single-phased alcohol media. Their selectivity towards different alcohol nucleophiles was quantified by determining the transgalactosylation/hydrolysis ratio in the water/alcohol mixtures containing water in concentrations below the level of saturation. p-Nitrophenyl-β-galactoside was used as a glycosyl donor at a concentration of 10 mM. Both the total reaction rate (transgalactosylation+hydrolysis and the ratio between the transgalactosylation (alcoholysis and hydrolysis increased with the increase of water activity. Although the A. oryzae β-galactosidase showed relatively low total activity (3.13 μmol/(min·mg protein, it exhibited the highest selectivity towards the hexanol nucleophile among the examined enzymes (0.65. The selectivity values in all the examined cases were below one, which implies that the hydrolysis, and not the synthesis, was the dominating reaction. The total reaction rate (transgalactosylation+hydrolysis was strongly affected by the water activity, and for the specific water activity in the different alcohols, it increased in the following order: n-octanol, n-hexanol, n-butanol.

Preparation of 7-substituted ginkgolide derivatives

DEFF Research Database (Denmark)

Vogensen, Stine Byskov; Strømgaard, Kristian; Shindou, Hideo

2003-01-01

alpha-fluoro ginkgolide B was equipotent to ginkgolide B underlining the critical importance of the 7-position of ginkgolides for PAF receptor activity. Herein we describe the synthesis of a series of ginkgolide B derivatives with modifications at the 7-position and the pharmacological evaluation...... of these derivatives as assayed by cloned PAF receptors. In two cases nucleophilic attack on a 7beta-O-triflate ginkgolide B did not lead to the expected products, but gave rise to two unprecedented ginkgolide derivatives, one with a novel rearranged skeleton. Furthermore, standard reduction of 7alpha-azido ginkgolide......-chloro ginkgolide B, the most potent nonaromatic ginkgolide derivative described to date with a K(i) value of 110 nM....

Characterization of hydroxyapatite substituted with silicon; Caracterizacao de hiroxiapatita substituida com silicio

Energy Technology Data Exchange (ETDEWEB)

Silva, H.M. da; Soares, G.A., E-mail: helena@metalmat.ufrj.b [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao em Engenharia. Lab. de Biomateriais para Engenharia Ossea; Mateescu, M.; Anselme, K. [Universite de Haute-Alsace (UHA/IS2M), Mulhouse (France). Inst. de Science des Materiaux; Palard, M.; Champion, E. [Universite de Limoges (France). Fac. des Sciences et Techniques

2009-07-01

Incorporation of silicon (Si) ions into hydroxyapatite structure (HA) influences on physical, chemical and physiological properties. Some studies reported the improved bioactivity Si substitution, and it also accelerates the biomineralization process. The main objective of this work is to characterize stoichiometric hydroxyapatite and hydroxyapatite substituted with 1.13% in weight of Si (SiHA) using a wet precipitation method followed by a heat treatment. SEM/EDS, AFM, DRX and FTIR analyses were used to characterize the samples. EDS and FTIR results confirmed the presence of Si. Silicon induces small changes on crystal structure of HA, not detected on X-ray diffraction patterns of sintered tablets of SiHA and HA. No secondary phases were observed, that indicates the Si had entered the HA lattice. (author)

Sulfur Denitrosylation by an Engineered Trx-like DsbG Enzyme Identifies Nucleophilic Cysteine Hydrogen Bonds as Key Functional Determinant.

Science.gov (United States)

Lafaye, Céline; Van Molle, Inge; Tamu Dufe, Veronica; Wahni, Khadija; Boudier, Ariane; Leroy, Pierre; Collet, Jean-François; Messens, Joris

2016-07-15

Exposure of bacteria to NO results in the nitrosylation of cysteine thiols in proteins and low molecular weight thiols such as GSH. The cells possess enzymatic systems that catalyze the denitrosylation of these modified sulfurs. An important player in these systems is thioredoxin (Trx), a ubiquitous, cytoplasmic oxidoreductase that can denitrosylate proteins in vivo and S-nitrosoglutathione (GSNO) in vitro However, a periplasmic or extracellular denitrosylase has not been identified, raising the question of how extracytoplasmic proteins are repaired after nitrosative damage. In this study, we tested whether DsbG and DsbC, two Trx family proteins that function in reducing pathways in the Escherichia coli periplasm, also possess denitrosylating activity. Both DsbG and DsbC are poorly reactive toward GSNO. Moreover, DsbG is unable to denitrosylate its specific substrate protein, YbiS. Remarkably, by borrowing the CGPC active site of E. coli Trx-1 in combination with a T200M point mutation, we transformed DsbG into an enzyme highly reactive toward GSNO and YbiS. The pKa of the nucleophilic cysteine, as well as the redox and thermodynamic properties of the engineered DsbG are dramatically changed and become similar to those of E. coli Trx-1. X-ray structural insights suggest that this results from a loss of two direct hydrogen bonds to the nucleophilic cysteine sulfur in the DsbG mutant. Our results highlight the plasticity of the Trx structural fold and reveal that the subtle change of the number of hydrogen bonds in the active site of Trx-like proteins is the key factor that thermodynamically controls reactivity toward nitrosylated compounds. © 2016 by The American Society for Biochemistry and Molecular Biology, Inc.

Magnesium substituted hydroxyapatite formation on (Ti,Mg)N coatings produced by cathodic arc PVD technique

International Nuclear Information System (INIS)

Onder, Sakip; Kok, Fatma Nese; Kazmanli, Kursat; Urgen, Mustafa

2013-01-01

In this study, formation of magnesium substituted hydroxyapatite (Ca 10−x Mg x (PO 4 ) 6 (OH) 2 ) on (Ti,Mg)N and TiN coating surfaces were investigated. The (Ti 1−x ,Mg x )N (x = 0.064) coatings were deposited on titanium substrates by using cathodic arc physical vapor deposition technique. TiN coated grade 2 titanium substrates were used as reference to understand the role of magnesium on hydroxyapatite (HA) formation. The HA formation experiments was carried out in simulated body fluids (SBF) with three different concentrations (1X SBF, 5X SBF and 5X SBF without magnesium ions) at 37 °C. The coatings and hydroxyapatite films formed were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and FTIR Spectroscopy techniques. The energy dispersive X-ray spectroscopy (EDS) analyses and XRD investigations of the coatings indicated that magnesium was incorporated in the TiN structure rather than forming a separate phase. The comparison between the TiN and (Ti, Mg)N coatings showed that the presence of magnesium in TiN structure facilitated magnesium substituted HA formation on the surface. The (Ti,Mg)N coatings can potentially be used to accelerate the HA formation in vivo conditions without any prior hydroxyapatite coating procedure. - Highlights: • Mg incorporated in (Ti,Mg)N coating structure and did not form a separate phase • Mg dissolution in SBF solution facilitated Mg-substituted hydroxyapatite formation • (Ti,Mg)N acted as Mg-source for Mg-substituted hydroxyapatite formation in SBF

Single phase inverter for a three phase power generation and distribution system

Science.gov (United States)

Lindena, S. J.

1976-01-01

A breadboard design of a single-phase inverter with sinusoidal output voltage for a three-phase power generation and distribution system was developed. The three-phase system consists of three single-phase inverters, whose output voltages are connected in a delta configuration. Upon failure of one inverter the two remaining inverters will continue to deliver three-phase power. Parallel redundancy as offered by two three-phase inverters is substituted by one three-phase inverter assembly with high savings in volume, weight, components count and complexity, and a considerable increase in reliability. The following requirements must be met: (1) Each single-phase, current-fed inverter must be capable of being synchronized to a three-phase reference system such that its output voltage remains phaselocked to its respective reference voltage. (2) Each single-phase, current-fed inverter must be capable of accepting leading and lagging power factors over a range from -0.7 through 1 to +0.7.

Paracrystalline Disorder from Phosphate Ion Orientation and Substitution in Synthetic Bone Mineral.

Science.gov (United States)

Marisa, Mary E; Zhou, Shiliang; Melot, Brent C; Peaslee, Graham F; Neilson, James R

2016-12-05

Hydroxyapatite is an inorganic mineral closely resembling the mineral phase in bone. However, as a biological mineral, it is highly disordered, and its composition and atomistic structure remain poorly understood. Here, synchrotron X-ray total scattering and pair distribution function analysis methods provide insight into the nature of atomistic disorder in a synthetic bone mineral analogue, chemically substituted hydroxyapatite. By varying the effective hydrolysis rate and/or carbonate concentration during growth of the mineral, compounds with varied degrees of paracrystallinity are prepared. From advanced simulations constrained by the experimental pair distribution function and density functional theory, the paracrystalline disorder prevalent in these materials appears to result from accommodation of carbonate in the lattice through random displacement of the phosphate groups. Though many substitution modalities are likely to occur in concert, the most predominant substitution places carbonate into the mirror plane of an ideal phosphate site. Understanding the mineralogical imperfections of a biologically analogous hydroxyapatite is important not only to potential bone grafting applications but also to biological mineralization processes themselves.

Analysis of chemical equilibrium of silicon-substituted fluorescein and its application to develop a scaffold for red fluorescent probes.

Science.gov (United States)

Hirabayashi, Kazuhisa; Hanaoka, Kenjiro; Takayanagi, Toshio; Toki, Yuko; Egawa, Takahiro; Kamiya, Mako; Komatsu, Toru; Ueno, Tasuku; Terai, Takuya; Yoshida, Kengo; Uchiyama, Masanobu; Nagano, Tetsuo; Urano, Yasuteru

2015-09-01

Fluorescein is a representative green fluorophore that has been widely used as a scaffold of practically useful green fluorescent probes. Here, we report synthesis and characterization of a silicon-substituted fluorescein, i.e., 2-COOH TokyoMagenta (2-COOH TM), which is a fluorescein analogue in which the O atom at the 10' position of the xanthene moiety of fluorescein is replaced with a Si atom. This fluorescein analogue forms a spirolactone ring via intramolecular nucleophilic attack of the carboxylic group in a pH-dependent manner. Consequently, 2-COOH TM exhibits characteristic large pH-dependent absorption and fluorescence spectral changes: (1) 2-COOH TM is colorless at acidic pH, whereas fluorescein retains observable absorption and fluorescence even at acidic pH, and the absorption maximum is also shifted; (2) the absorption spectral change occurs above pH 7.0 for 2-COOH TM and below pH 7.0 for fluorescein; (3) 2-COOH TM shows a much sharper pH response than fluorescein because of its pKa inversion, i.e., pKa1 > pKa2. These features are also different from those of a compound without the carboxylic group, 2-Me TokyoMagenta (2-Me TM). Analysis of the chemical equilibrium between pH 3.0 and 11.0 disclosed that 2-COOH TM favors the colorless and nonfluorescent lactone form, compared with fluorescein. Substitution of Cl atoms at the 4' and 5' positions of the xanthene moiety of 2-COOH TM to obtain 2-COOH DCTM shifted the equilibrium so that the new derivative exists predominantly in the strongly fluorescent open form at physiological pH (pH 7.4). To demonstrate the practical utility of 2-COOH DCTM as a novel scaffold for red fluorescent probes, we employed it to develop a probe for β-galactosidase.

Biologic and synthetic skin substitutes: An overview.

Science.gov (United States)

Halim, Ahmad Sukari; Khoo, Teng Lye; Mohd Yussof, Shah Jumaat

2010-09-01

The current trend of burn wound care has shifted to more holistic approach of improvement in the long-term form and function of the healed burn wounds and quality of life. This has demanded the emergence of various skin substitutes in the management of acute burn injury as well as post burn reconstructions. Skin substitutes have important roles in the treatment of deep dermal and full thickness wounds of various aetiologies. At present, there is no ideal substitute in the market. Skin substitutes can be divided into two main classes, namely, biological and synthetic substitutes. The biological skin substitutes have a more intact extracellular matrix structure, while the synthetic skin substitutes can be synthesised on demand and can be modulated for specific purposes. Each class has its advantages and disadvantages. The biological skin substitutes may allow the construction of a more natural new dermis and allow excellent re-epithelialisation characteristics due to the presence of a basement membrane. Synthetic skin substitutes demonstrate the advantages of increase control over scaffold composition. The ultimate goal is to achieve an ideal skin substitute that provides an effective and scar-free wound healing.

Biologic and synthetic skin substitutes: An overview

Directory of Open Access Journals (Sweden)

Halim Ahmad

2010-10-01

Full Text Available The current trend of burn wound care has shifted to more holistic approach of improvement in the long-term form and function of the healed burn wounds and quality of life. This has demanded the emergence of various skin substitutes in the management of acute burn injury as well as post burn reconstructions. Skin substitutes have important roles in the treatment of deep dermal and full thickness wounds of various aetiologies. At present, there is no ideal substitute in the market. Skin substitutes can be divided into two main classes, namely, biological and synthetic substitutes. The biological skin substitutes have a more intact extracellular matrix structure, while the synthetic skin substitutes can be synthesised on demand and can be modulated for specific purposes. Each class has its advantages and disadvantages. The biological skin substitutes may allow the construction of a more natural new dermis and allow excellent re-epithelialisation characteristics due to the presence of a basement membrane. Synthetic skin substitutes demonstrate the advantages of increase control over scaffold composition. The ultimate goal is to achieve an ideal skin substitute that provides an effective and scar-free wound healing.

Chiral smectogens with four-phenyl-ring molecular core, laterally substituted by iodine atom

Czech Academy of Sciences Publication Activity Database

Podoliak, Natalia; Novotná, Vladimíra; Kašpar, Miroslav; Hamplová, Věra; Pacherová, Oliva

2015-01-01

Roč. 42, č. 3 (2015), s. 404-411 ISSN 0267-8292 R&D Projects: GA ČR GA13-14133S; GA MŠk(CZ) LD14007 Institutional support: RVO:68378271 Keywords : liquid crystals * iodine lateral substitution * lactic acid unit * ferroelectric phase Subject RIV: JJ - Other Materials Impact factor: 2.244, year: 2015

Influence of Fe{sup 3+} substitution on the dielectric and ferroelectric characteristics of Lead Indium Niobate

Energy Technology Data Exchange (ETDEWEB)

Divya, A.S.; Kumar, V., E-mail: vkumar10@yahoo.com

2015-07-15

Highlights: • Prepared phase-pure Fe{sup 3+}-substituted Lead Indium Niobate, Pb[(In{sub 0.50−x}Fe{sub x})Nb{sub 0.50}]O{sub 3} by sol–gel method. • Spontaneous Relaxor (R) → Ferroelectric (FE) transition observed for the composition with x = 0.20. • Local structural rearrangement responsible for R → FE transition has been confirmed by Raman spectroscopy. - Abstract: Lead Indium Niobate, Pb(In{sub 0.50}Nb{sub 0.50})O{sub 3} (PIN) is a complex perovskite that exhibits Relaxor (R) characteristics. In this study, we report the synthesis of phase-pure compositions in the system Pb[(In{sub 0.50−x}Fe{sub x})Nb{sub 0.50}]O{sub 3} by sol–gel method and discuss the influence of isovalent substitution of Indium by Iron on the dielectric and ferroelectric characteristics. Spontaneous transition to the Ferroelectric (FE) phase has been observed for the composition having x = 0.20. Local structural rearrangements responsible for R → FE transition have also been studied by Raman spectroscopy and are discussed in detail.

Cell response of calcium phosphate based ceramics, a bone substitute material

Directory of Open Access Journals (Sweden)

Juliana Marchi

2013-01-01

Full Text Available The aim of this study was to characterize calcium phosphate ceramics with different Ca/P ratios and evaluate cell response of these materials for use as a bone substitute. Bioceramics consisting of mixtures of hydroxyapatite (HAp and β-tricalcium phosphate (β-TCP powders in different proportions were pressed and sintered. The physical and chemical properties of these bioceramics were then characterized. Characterization of the biological properties of these materials was based on analysis of cell response using cultured fibroblasts. The number of cells attached to the samples was counted from SEM images of samples exposed to cell culture solution for different periods. These data were compared by analysis of variance (ANOVA complemented by the Tukey's test. The TCP sample had higher surface roughness and lower density. The adherence and growth of FMM1 cells on samples from all groups was studied. Even though the different calcium based ceramics exhibited properties which made them suitable as bone substitutes, those with higher levels of β-TCP revealed improved cell growth on their surfaces. These observations indicated two-phase calcium phosphate based materials with a β-TCP surface layer to be a promising bone substitute.

Bone substitute biomaterials

CERN Document Server

Mallick, K

2014-01-01

Bone substitute biomaterials are fundamental to the biomedical sector, and have recently benefitted from extensive research and technological advances aimed at minimizing failure rates and reducing the need for further surgery. This book reviews these developments, with a particular focus on the desirable properties for bone substitute materials and their potential to encourage bone repair and regeneration. Part I covers the principles of bone substitute biomaterials for medical applications. One chapter reviews the quantification of bone mechanics at the whole-bone, micro-scale, and non-scale levels, while others discuss biomineralization, osteoductivization, materials to fill bone defects, and bioresorbable materials. Part II focuses on biomaterials as scaffolds and implants, including multi-functional scaffolds, bioceramics, and titanium-based foams. Finally, Part III reviews further materials with the potential to encourage bone repair and regeneration, including cartilage grafts, chitosan, inorganic poly...

Fractionated-combustion analysis of carbonate-containing phases in composite materials of the hydroxyapatite-calcium carbonate system

Science.gov (United States)

Goldberg, M. A.; Shibaeva, T. V.; Smirnov, V. V.; Kutsev, S. V.; Barinov, S. M.; Grigorovich, K. V.

2012-12-01

Materials in the hydroxyapatite (HA)-calcium carbonate (CC) system were synthesized by a precipitation method from aqueous solutions. According to the data of X-ray phase analysis and IR spectroscopy, the powders consisted of CC and AB-type carbonate-substituted HA (CHA). In order to determine the content of carbonate-containing phases in materials, the temperature-temporal mode of fractionated-combustion analysis of carbon was developed. The quantitative phase ratios and the degree of substitution of carbonate groups in CHA were determined. It was shown that the degree of substitution of carbonate groups in CHA increased from 2.47 to 5.31 wt % as the CC content increased from 13.50 to 88.33 wt %.

The SMART Platform: early experience enabling substitutable applications for electronic health records

Science.gov (United States)

Mandel, Joshua C; Murphy, Shawn N; Bernstam, Elmer Victor; Ramoni, Rachel L; Kreda, David A; McCoy, J Michael; Adida, Ben; Kohane, Isaac S

2012-01-01

Objective The Substitutable Medical Applications, Reusable Technologies (SMART) Platforms project seeks to develop a health information technology platform with substitutable applications (apps) constructed around core services. The authors believe this is a promising approach to driving down healthcare costs, supporting standards evolution, accommodating differences in care workflow, fostering competition in the market, and accelerating innovation. Materials and methods The Office of the National Coordinator for Health Information Technology, through the Strategic Health IT Advanced Research Projects (SHARP) Program, funds the project. The SMART team has focused on enabling the property of substitutability through an app programming interface leveraging web standards, presenting predictable data payloads, and abstracting away many details of enterprise health information technology systems. Containers—health information technology systems, such as electronic health records (EHR), personally controlled health records, and health information exchanges that use the SMART app programming interface or a portion of it—marshal data sources and present data simply, reliably, and consistently to apps. Results The SMART team has completed the first phase of the project (a) defining an app programming interface, (b) developing containers, and (c) producing a set of charter apps that showcase the system capabilities. A focal point of this phase was the SMART Apps Challenge, publicized by the White House, using http://www.challenge.gov website, and generating 15 app submissions with diverse functionality. Conclusion Key strategic decisions must be made about the most effective market for further disseminating SMART: existing market-leading EHR vendors, new entrants into the EHR market, or other stakeholders such as health information exchanges. PMID:22427539

Study of thermodynamics and electronics properties of hybrids of substituted Haucke compounds

International Nuclear Information System (INIS)

Crivello, J.C.

2005-06-01

This manuscript presents a combined experimental and theoretical contribution to the study of the substituted Haucke phase AB5. These compounds can reversibly absorb hydrogen under conditions of pressure and temperature satisfactory for many technological applications including hydrogen storage. The thermodynamic characterization of the solid-gas reaction was carried out for mono and poly-substituted compounds. In the respect of good conditions of growth (decomposition) of the hydride phase, we sought to determine the thermodynamic trajectories allowed during some various transformations. The experimental results showed that the rate of transformation and the hierarchy of the return-points memory are the only parameters allowing to draw a general law related to the irreversible character of hysteresis. These systems evolve in 'static' mode, independent of the time and whatever the nature of host materials. Moreover, the effect of substitution elements on electronic properties has been studied using ab initio band structure calculations for the ANi 5 (A=La, Y, Ca) and LaNi 5-x M x compounds, where M is an element of the type s-p (Al, Si, Ge, Sn), of type s (Cu), or a transition metal (Mn, Fe, Co). While dissociating the structural effects, the role of the chemical interaction with hydrogen was analyzed. These results made it possible to identify the factors which control the stability of the hydrides and their maximum absorption capacity. The bulk moduli of these materials were calculated and their variation was discussed in relation to the properties of hydrogen absorption. (author)

MC3T3-E1 proliferation and differentiation on biphasic mixtures of Mg substituted β-tricalcium phosphate and amorphous calcium phosphate

International Nuclear Information System (INIS)

Singh, Satish S.; Roy, Abhijit; Lee, Boeun E.; Banerjee, Ipsita; Kumta, Prashant N.

2014-01-01

A low temperature aqueous approach was used to synthesize nanocrystalline, high surface area Mg 2+ substituted β-tricalcium phosphate (β-TCMP) to assess its potential use as a synthetic bone graft substitute. X-ray diffraction indicated that β-TCMP was the predominant crystalline phase formed. However, thermal analysis revealed the presence of a secondary amorphous phase which increased with increasing Mg 2+ concentration. Further analysis by Rietveld refinement indicated that the level of ionic substitution of Ca 2+ by Mg 2+ was significantly lower than the amount of Mg 2+ measured using elemental analysis, confirming the formation of a Mg 2+ rich secondary amorphous phase. MC3T3-E1 proliferation on substrates prepared using β-TCMP was assessed using the MTT assay. In comparison to commercially available β-TCP, increased proliferation was observed on samples prepared with 50% Mg, despite elevated Mg 2+ and PO 4 3− concentrations in culture media. Alkaline phosphatase (ALP) activity and qRT-PCR were used to study the effect of varying Mg 2+ substitution on osteogenic differentiation. Cells cultured on β-TCMP substrates prepared with increased Mg 2+ concentrations expressed significantly increased levels of ALP activity and osteogenic genes such as, osteocalcin, collagen-1, and Runx2, in comparison to those cultured on commercially available β-TCP

Iminoboronate Formation Leads to Fast and Reversible Conjugation Chemistry of α-Nucleophiles at Neutral pH.

Science.gov (United States)

Bandyopadhyay, Anupam; Gao, Jianmin

2015-10-12

Bioorthogonal reactions that are fast and reversible under physiological conditions are in high demand for biological applications. Herein, it is shown that an ortho boronic acid substituent makes aryl ketones rapidly conjugate with α-nucleophiles at neutral pH. Specifically, 2-acetylphenylboronic acid and derivatives were found to conjugate with phenylhydrazine with rate constants of 10(2) to 10(3) M(-1) s(-1) , comparable to the fastest bioorthogonal conjugations known to date. (11) B NMR analysis revealed the varied extent of iminoboronate formation of the conjugates, in which the imine nitrogen forms a dative bond with boron. The iminoboronate formation activates the imines for hydrolysis and exchange, rendering these oxime/hydrazone conjugations reversible and dynamic under physiological conditions. The fast and dynamic nature of the iminoboronate chemistry should find wide applications in biology. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Np Incorporation into Uranyl Alteration Phases: A Quantum Mechanical Approach

International Nuclear Information System (INIS)

L.C. Huller; R.C. Win; U.Ecker

2006-01-01

Neptunium is a major contributor to the long-term radioactivity in a geologic repository for spent nuclear fuel (SNF) due to its long half-life (2.1 million years). The mobility of Np may be decreased by incorporation into the U 6+ phases that form during the corrosion of SNF. The ionic radii of Np (0.089nm) and U (0.087nm) are similar, as is their chemistry. Experimental studies have shown Np can be incorporated into uranyl phases at concentrations of ∼ 100 ppm. The low concentration of Np in the uranyl phases complicates experimental detection and presents a significant challenge for determining the incorporation mechanism. Therefore, we have used quantum mechanical calculations to investigate incorporation mechanisms and evaluate the energetics of Np substituting for U. CASTEP, a density functional theory based code that uses plane waves and pseudo-potentials, was used to calculate optimal H positions, relaxed geometry, and energy of different uranyl phases. The incorporation energy for Np in uranyl alteration phases was calculated for studtite, [(UO 2 )O 2 (H 2 O) 2 ](H 2 ) 2 , and boltwoodite, HK(UO 2 )(SiO 4 )* 1.5(H 2 O). Studtite is the rare case of a stable uranyl hydroxyl-peroxide mineral that forms in the presence of H 2 O 2 from the radiolysis of H 2 O. For studtite, two incorporation mechanisms were evaluated: (1) charge-balanced substitution of Np 5+ and H + for one U 6+ , and (2) direct substitution of Np 6+ for U 6+ . For boltwoodite, the H atomic positions prior to Np incorporation were determined, as well as the Np incorporation mechanisms and the corresponding substitution energies. The preferential incorporation of Np into different structure types of U 6+ minerals was also investigated. Quantum mechanical substitution energies have to be derived at Np concentrations higher than the ones found in experiments or expected in a repository. However, the quantum mechanical results are crucial for subsequent empirical force-field and Monte

Iron(III) and manganese(II) substituted hydroxyapatite nanoparticles: Characterization and cytotoxicity analysis

International Nuclear Information System (INIS)

Li Yan; Nam, C T; Ooi, C P

2009-01-01

Calcium hydroxyapatite (HA) is the main inorganic component of natural bones and can bond to bone directly in vivo. Thus HA is widely used as coating material on bone implants due to its good osteoconductivity and osteoinductivity. Metal ions doped HA have been used as catalyst or absorbents since the ion exchange method has introduced new properties in HA which are inherent to the metal ions. For example, Mn 2+ ions have the potential to increase cell adhesion while Fe 3+ ions have magnetic properties. Here, Fe(III) substituted hydroxyapatite (Fe-HA) and Mn(II) substituted hydroxyapatite (Mn-HA) were produced by wet chemical method coupled with ion exchange mechanism. Compared with pure HA, the colour of both Fe-HA and Mn-HA nanoparticles changed from white to brown and pink respectively. The intensity of the colours increased with increasing substitution concentrations. XRD patterns showed that all samples were single phased HA while the FTIR spectra revealed all samples possessed the characteristic phosphate and hydroxyl adsorption bands of HA. However, undesired adsorption bands of carbonate substitution (B-type carbonated HA) and H 2 O were also detected, which was reasonable since the wet chemical method was used in the synthesis of these nanoparticles. FESEM images showed all samples were elongated spheroids with small size distribution and of around 70 nm, regardless of metal ion substitution concentrations. EDX spectra showed the presence of Fe and Mn and ICP-AES results revealed all metal ion substituted HA were non-stoichiometric (Ca/P atomic ratio deviates from 1.67). Fe-HA nanoparticles were paramagnetic and the magnetic susceptibility increased with the increase of Fe content. Based on the extraction assay for cytotoxicity test, both Fe-HA and Mn-HA displayed non-cytotoxicity to osteoblast.

Substituting freshwater: Can ocean desalination and water recycling capacities substitute for groundwater depletion in California?

Science.gov (United States)

Badiuzzaman, Pierre; McLaughlin, Eoin; McCauley, Darren

2017-12-01

While the sustainability of resource depletion is a longstanding environmental concern, wider attention has recently been given to growing water scarcity and groundwater depletion. This study seeks to test the substitutability assumption embedded in weak sustainability indicators using a case study of Californian water supply. The volume of groundwater depletion is used as a proxy for unsustainable water consumption, and defined by synthesising existing research estimates into low, medium and high depletion baselines. These are compared against projected water supply increases from ocean desalination and water recycling by 2035, to determine whether new, drought-proof water sources can substitute for currently unsustainable groundwater consumption. Results show that the maximum projected supply of new water, 2.47 million acre-feet per year (MAF/yr), is sufficient to meet low depletion estimates of 2.02 MAF/yr, but fails to come near the high depletion estimate of 3.44 MAF/yr. This does not necessarily indicate physical limitations of substitutability, but more so socio-economic limitations influenced by high comparative costs. By including capacities in demand-substitutability via urban water conservation, maximum predicted capacities reach 5.57 MAF/yr, indicating wide room for substitution. Based on these results, investment in social and institutional capital is an important factor to enhance demand-side substitutability of water and other natural resources, which has been somewhat neglected by the literature on the substitutability of natural resources. Copyright © 2017 Elsevier Ltd. All rights reserved.

Structural and magnetic Properties of TbZn-substituted calcium barium M-type nano-structured hexa-ferrites

Energy Technology Data Exchange (ETDEWEB)

Khan, Hasan M. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Department of Electronics, University of York, York YO10 5DD (United Kingdom); Islam, M.U., E-mail: dr.misbahulislam@bzu.edu.pk [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Xu, Yongbing [Department of Electronics, University of York, York YO10 5DD (United Kingdom); Nanjing–York International Centre of Spintronics and Nano-Engineering, Nanjing University, Nanjing 210093 (China); Asif Iqbal, M. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); National University of Science and Technology, College of E and ME, Islamabad (Pakistan); Ali, Irshad [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan)

2014-03-15

Highlights: • Tb–Zn substituted Ca{sub 0.5}Ba{sub 0.5}Fe{sub 12}O{sub 19} samples exhibit single magnetoplumbite phase. • Lattice parameters a and c have increasing values. • Coercivity can be tuned at lower substitution level • Crystallites size was found in the range 18–25 nm by TEM and by Scherrer formula. • These hexa-ferrites are suitable for microwave devices and magnetic recording media. -- Abstract: Effect of TbZn substitution on the structural and magnetic properties of Ca{sub 0.5}Ba{sub 0.5−x}Tb{sub x}Zn{sub y}Fe{sub 12−y}O{sub 19}, (x = 0.00–0.10; y = 0.00–1.00) ferrites prepared by sol–gel auto combustion is reported. The synthesized samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Vibrating Sample magnetometery. The X-ray diffraction analysis confirmed single phase M-type hexa-ferrite structure. The lattice parameters were found to increase as TbZn contents increases, which is attributed to the ionic sizes of the implicated cations. The TbZn seems to be completely soluble in the lattice. The results of scanning electron microscopy and transmission electron microscopy shows that the grain size decreases with increase of TbZn substitution. The coercivity values (1277–2025 Oe) of all samples lies in the range of M-type hexa-ferrite and indicate that an increase of anisotropy was achieved by substitution of TbZn, while the size of nanoparticles was drastically reduced between 18 and 25 nm. The increased anisotropy and fine particle size are useful for many applications, such as improving signal noise ratio of recording devices.

Chlorine-38 for chlorine substitution in geometric and diastereomeric compounds: mechanism and sterochemistry

International Nuclear Information System (INIS)

Acciani, T.R.

1977-01-01

In order to determine how solvents control the stereochemial course of the hot substitution reactions, the stereohemistry of the energetic 38 Cl for Cl was studied in diastereomeric 1,2-dichloro-1,2-difluoroethane and the geometric isomers of 1,2-dichlorohexafluorocyclobutane. In each system the conformer population was determined by NMR and dipole moment techniques. A comparison was made between the changes of the stereochemical course of the substitution reaction and the concentration and nature of the solvent. The results presented in this investigation indicate that the stereohemical course of a hot atom substitution reaction is directly controlled by solvents participating in the de-excitation stabilization of excited compounds or in the relaxation process of intermediate radicals. This work also indicates that the nature of the solvent cage wall can control the progress of the hot reaction. Abstraction reactions of the Cl can occur in the cage with the compounds composing the cage wall. These reactions can effectively change the stereochemical course of the hot substitution reaction. It appears that the liquid phase hot atom substitution reactions observed in this investigation are best explained by the caged radical-radical combination model. Strong solute-solvent interactions reduce the time for relaxation of the radicals in the solvent cage thus preventing the radicals from obtaining planarity and consequently retention products. On the other hand, weak solute-solvent interactions increase the time for relaxation of the intermediate which leads to a racemization of reaction products

Structural and electrical properties of Sm{sup 3+} substituted PZT ceramics

Energy Technology Data Exchange (ETDEWEB)

Pandey, S.K. [Solid State Physics Laboratory, Timarpur, Delhi 110 054 (India)], E-mail: 628@ssplnet.org; Thakur, O.P.; Bhattacharya, D.K. [Solid State Physics Laboratory, Timarpur, Delhi 110 054 (India); Prakash, Chandra [DRDO Bhawan, DHQ, New Delhi 110 011 (India); Chatterjee, Ratnamala [Department of Physics, Indian Institute of Technology, New Delhi 110 016 (India)

2009-01-22

Samarium modified lead zirconate titanate (PSZT: Pb{sub 1-x}Sm{sub x}(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}: x = 0, 0.02, 0.04, 0.06) ceramics were synthesized by solid state ceramic route. XRD shows single-phase formation with rhombohedral structure up to x = 0.04. With Sm-substitution, the grain size first increases up to x = 0.02 and then decreases. A metal/ferroelectric/metal (MFM) structure was made by depositing gold electrode on the flat surfaces for electrical measurements. All samples show normal ferroelectric behaviour, however, a squareness of P-E loop (polarization vs. electric field) was observed to increase with Sm content. Higher electromechanical coupling coefficients (K{sub p} and K{sub t}) have been achieved for the PZT with 6 mol% Sm substitution and having fine grain size.

Modeling molecular acidity with electronic properties and Hammett constants for substituted benzoic acids.

Science.gov (United States)

Huang, Ying; Liu, Lianghong; Liu, Wanhui; Liu, Shaogang; Liu, Shubin

2011-12-29

Molecular acidity is an important physiochemical property essential in many fields of molecular studies, but an efficient and reliable computational approach to make accurate predictions is still missing. In this work, based on our previous studies to use gas phase electronic properties such as molecular electrostatic potential and valence natural atomic orbitals of the acidic atom and leaving proton, we demonstrate here that different approaches can be employed to tackle this problem. To that end, we employ 196 singly, doubly, and triply substituted benzoic acids for the study. We show that two different approaches are possible, one focusing on the carboxyl group through its localized electronic properties and the other on the substituting groups via Hammett constants and their additivity rule. Our present results clearly exhibit that with the linear models built from the singly substituted species, one can accurately predict the pK(a) values for the doubly and triply substituted species with both of these two approaches. The predictions from these approaches are consistent with each other and agree well with the experimental data. These intrinsically different approaches are the two manifestations of the same molecular acidity property, both valid and complementary to each other. © 2011 American Chemical Society

40 CFR 721.4420 - Substituted hydroxylamine.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted hydroxylamine. 721.4420... Substances § 721.4420 Substituted hydroxylamine. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as substituted hydroxylamine (PMN P-84-492) is...

Selective Se-for-S substitution in Cs-bearing uranyl compounds

Energy Technology Data Exchange (ETDEWEB)

Gurzhiy, Vladislav V., E-mail: vladgeo17@mail.ru [Department of Crystallography, St. Petersburg State University, University Emb. 7/9, 199034 St. Petersburg, Russia Federation (Russian Federation); Tyumentseva, Olga S.; Krivovichev, Sergey V. [Department of Crystallography, St. Petersburg State University, University Emb. 7/9, 199034 St. Petersburg, Russia Federation (Russian Federation); Tananaev, Ivan G. [Far Eastern Federal University, Suhanova st. 8, Vladivostok 690950 (Russian Federation)

2017-04-15

Phase formation in the mixed sulfate-selenate aqueous system of uranyl nitrate and cesium nitrate has been investigated. Two types of crystalline compounds have been obtained and characterized using a number of experimental (single crystal XRD, FTIR, SEM) and theoretical (information-based complexity calculations, topological analysis) techniques. No miscibility gaps have been observed for Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se), which crystallizes in tetragonal system, P-42{sub 1}m, a =9.616(1)–9.856(2), c =8.105(1)–8.159(1) Å, V =749.6(2)–792.5(3) Å{sup 3}. Nine phases with variable amount of S and Se have been structurally characterized. The structures of the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) compounds are based upon the [(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}]{sup 2-} layers of corner-sharing uranyl pentagonal bipyramids and TO{sub 4} tetrahedra. The layers contain two types of tetrahedral sites: T1 (3-connected, i.e. having three O atoms shared by adjacent uranyl polyhedra) and T2 (4-connected). The Se-for-S substitution in tetrahedral sites is highly selective with smaller S{sup 6+} cation showing a strong preference for the more tightly bonded T2 site. Crystallization in the pure Se system starts with the formation of Cs{sub 2}[(UO{sub 2})(SeO{sub 4}){sub 2}(H{sub 2}O)](H{sub 2}O) crystals, its subsequent dissolution and formation of Cs{sub 2}[(UO{sub 2}){sub 2}(SeO{sub 4}){sub 3}]. The information-based structural complexity calculations for these two phases support the rule that more topologically complex structures form at the latest stages of crystallization. - Graphical abstract: Nine phases representing the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) solid solution series with variable amount of S and Se have been prepared by isothermal evaporation from aqueous solutions and characterized using a number of experimental and theoretical techniques. No immiscibility is observed between the

Investigation of solid-phase hydrogenation of amino acids and peptides

International Nuclear Information System (INIS)

Zolotarev, Yu.A.; Myasoedov, N.F.; Zajtsev, D.A.; Lubnin, M.Yu.; Tatur, V.Yu.; Kozik, V.S.; Dorokhova, E.M.; Rozenberg, S.N.

1990-01-01

The possibility of synthesizing amino acids and peptides multiply labelled with tritium or deuterium by the method of solid-phase isotopic exchange with gaseous hydrogen isotopes was verified. Establishment of the isotopic hydrogen equilibrium between the gaseous phase and the solid phase formed by the amino acid molecules was found experimentally. The activation energy of the isotopic exchange is 13 kcal/mol. A mathematical model was set up for the isotopic exchange with a probable substitution of hydrogen atoms. Uniformly labelled amino acids were obtained in a high optical purity and with 80 to 90% hydrogen substitution by deuterium and tritium. Tritiated peptides were prepared in high yields at molar activities of 1.5 to 3.7 TBq/mmol. (author). 4 tabs

Pulsed laser thin film growth of di-octyl substituted polyfluorene and its co-polymers

Energy Technology Data Exchange (ETDEWEB)

Gupta, R.K.; Ghosh, K.; Kahol, P.K. [Department of Physics, Astronomy and Materials Science, Missouri State University, Springfield, MO 65897 (United States); Yoon, J. [Department of Physics and Astronomy, University of Missouri, Columbia, MO 65211 (United States); Guha, S. [Department of Physics and Astronomy, University of Missouri, Columbia, MO 65211 (United States)], E-mail: guhas@missouri.edu

2008-08-30

Matrix-assisted pulsed laser deposition (PLD) allows a controlled layer-by-layer growth of polymer films. Di-octyl substituted polyfluorene (PF8) and its copolymers were deposited as thin films using matrix-assisted PLD by employing a KrF excimer laser with a fluence of 125 mJ/pulses. The optical and structural properties of these films are compared with spincoated films via Raman spectroscopy, absorption and photoluminescence. The Raman spectra of both PLD and spincoated films are similar indicating that the polymer films deposited via PLD maintain their molecular structure. Both the spincoated and the PLD grown PF8 films that were cast from toluene show the presence of the {beta} phase. Benzothiadiazole substituted PF8 (F8BT) and butyl phenyl-substituted PF8 (PFB) PLD grown films show a slightly broader emission compared to the spincoated films, which is attributed to an enhanced intermolecular interaction in the PLD grown thin films.

Pulsed laser thin film growth of di-octyl substituted polyfluorene and its co-polymers

International Nuclear Information System (INIS)

Gupta, R.K.; Ghosh, K.; Kahol, P.K.; Yoon, J.; Guha, S.

2008-01-01

Matrix-assisted pulsed laser deposition (PLD) allows a controlled layer-by-layer growth of polymer films. Di-octyl substituted polyfluorene (PF8) and its copolymers were deposited as thin films using matrix-assisted PLD by employing a KrF excimer laser with a fluence of 125 mJ/pulses. The optical and structural properties of these films are compared with spincoated films via Raman spectroscopy, absorption and photoluminescence. The Raman spectra of both PLD and spincoated films are similar indicating that the polymer films deposited via PLD maintain their molecular structure. Both the spincoated and the PLD grown PF8 films that were cast from toluene show the presence of the β phase. Benzothiadiazole substituted PF8 (F8BT) and butyl phenyl-substituted PF8 (PFB) PLD grown films show a slightly broader emission compared to the spincoated films, which is attributed to an enhanced intermolecular interaction in the PLD grown thin films

Pulsed laser thin film growth of di-octyl substituted polyfluorene and its co-polymers

Science.gov (United States)

Gupta, R. K.; Ghosh, K.; Kahol, P. K.; Yoon, J.; Guha, S.

2008-08-01

Matrix-assisted pulsed laser deposition (PLD) allows a controlled layer-by-layer growth of polymer films. Di-octyl substituted polyfluorene (PF8) and its copolymers were deposited as thin films using matrix-assisted PLD by employing a KrF excimer laser with a fluence of 125 mJ/pulses. The optical and structural properties of these films are compared with spincoated films via Raman spectroscopy, absorption and photoluminescence. The Raman spectra of both PLD and spincoated films are similar indicating that the polymer films deposited via PLD maintain their molecular structure. Both the spincoated and the PLD grown PF8 films that were cast from toluene show the presence of the β phase. Benzothiadiazole substituted PF8 (F8BT) and butyl phenyl-substituted PF8 (PFB) PLD grown films show a slightly broader emission compared to the spincoated films, which is attributed to an enhanced intermolecular interaction in the PLD grown thin films.

The effect of 4-tert-butylpyridine and Li+ on the thermal degradation of TiO2 – bound ruthenium dye N719

DEFF Research Database (Denmark)

Phuong, Nguyen Tuyet; Hansen, Poul Erik; Lund, Torben

The ruthenium dyes N719, Z907 and C106 with the general structures [RuLL’(NCS)2)] degrade slowly at elevated temperatures (t > 80 ˚C) on the surface of nano-sized TiO2 particles. The degradation takes place by reversible nucleophilic substitution reactions in which one of the thiocyanate ligands ...

Surface tension alteration on calcite, induced by ion substitution

DEFF Research Database (Denmark)

Sakuma, Hiroshi; Andersson, Martin Peter; Bechgaard, Klaus

2014-01-01

The interaction of water and organic molecules with mineral surfaces controls many processes in nature and industry. The thermodynamic property, surface tension, is usually determined from the contact angle between phases, but how does one understand the concept of surface tension at the nanoscale...... preferentially as ion pairs at solution-calcite interfaces. Mg2+ incorporation weakens organic molecule adhesion while strengthening water adsorption so Mg2+ substitution renders calcite more water wet. When Mg2+ replaces 10% of surface Ca2+, the contact angle changes dramatically, by 40 to 70, converting...

Effect of a bulky lateral substitution by chlorine atom and methoxy group on self-assembling properties of lactic acid derivatives

International Nuclear Information System (INIS)

Stojanović, Maja; Bubnov, Alexej; Obadović, Dušanka Ž.; Hamplová, Věra; Cvetinov, Miroslav; Kašpar, Miroslav

2014-01-01

Several chiral liquid crystalline materials derived from the lactic acid have been studied with the aim to establish the effect of bulky lateral substituents on their self-assembling properties. A chlorine atom and methoxy group have been used as lateral substituents in ortho position to ether group position on phenyl ring far from the chiral centre. All the studied materials possess tilted ferroelectric smectic C* phase in a broad temperature range. In dependence on the molecular structure namely type of lateral substituent and length of the chiral chain, the cholesteric mesophase, orthogonal paraelectric smectic A* and crystal mesophases have been detected. Lateral chlorine substitution results in decrease of both the clearing point and crystallisation temperature as well as in a distinct increase of spontaneous polarization. Bulky methoxy substitution slightly suppresses the spontaneous polarisation but strongly increases the melting point that results in monotropic peculiarity of the SmC* phase. Mesomorphic, spontaneous, structural and dielectric properties of the substituted compounds were established and compared to those of the non-substituted ones in order to contribute to better understanding of the structure–property relationship for such chiral self-assembling materials. - Highlights: • Chiral liquid crystalline materials derived from the lactic acid have been studied. • Effect of bulky lateral substituents on self-assembling properties has been established. • Bulky methoxy substitution suppresses spontaneous polarisation but increases the melting point. • The compounds might have a strong potential for many advanced electro-optic applications

Morphology and Phase Transitions in Styrene-Butadiene-Styrene Triblock Copolymer Grafted with Isobutyl Substituted Polyhedral Oligomeric Silsesquioxanes (Postprint)

National Research Council Canada - National Science Library

Drazowski, Daniel B; Lee, Andre; Haddad, Timothy S

2007-01-01

Two symmetric triblock polystyrene-butadiene-polystyrene (SBS) copolymers with different styrene content were grafted with varying amounts of isobutyl-substituted polyhedral oligomeric silsesquioxane (POSS) molecules...

Morphology and Phase Transitions in Styrene-Butadiene-Styrene Triblock Copolymer Grafted with Isobutyl Substituted Polyhedral Oligomeric Silsesquioxanes (preprint)

National Research Council Canada - National Science Library

Drazkowski, Daniel B; Lee, Andre; Haddad, Timothy S

2006-01-01

Two symmetric triblock polystyrene-butadiene-polystyrene (SBS) copolymers with different styrene content were grafted with varying amounts of isobutyl-substituted polyhedral oligomeric silsesquioxane (POSS) molecules...

Synthesis of diastereomerically and enantiomerically pure 2,3-disubstituted tetrahydrofurans using a sulfoxonium ylide.

Science.gov (United States)

Schomaker, Jennifer M; Pulgam, Veera Reddy; Borhan, Babak

2004-10-27

Nucleophilic substitution reactions of 2,3-epoxy alcohols, easily prepared via Sharpless asymmetric epoxidation chemistry, offer access to a wide variety of enantiomerically pure compounds. In this communication, we describe the use of a Payne rearrangement to control regioselectivity in the ring-opening of a series of 2,3-epoxy alcohols with dimethylsulfoxonium methylide to yield diastereomerically and/or enantiomerically pure disubstituted tetrahydrofuran rings. The factors influencing the success and substitution pattern of the THF ring products are discussed, including steric, electronic, and solvent effects.

Use of rice straw ash as substitute of feldspar in triaxial porcelain; Cenizas del tamo de arroz como substituto del feldespato en la fabricacion de ceramica blanca

Energy Technology Data Exchange (ETDEWEB)

Alvaro Guzman, A.; Silverio Delvasto, A.; Enrique Sanchez, V.; Vicente Amigo, B.

2013-02-01

The substitution of raw materials for processing high energy consumption materials by agricultural and agro-industrial wastes causes a positive impacts on the environment preservation. One of these residues is rice straw, which according to FAO estimation, its annual production is about 600 million tons. In this research was studied the use of rice straw ash as substitute of the use of feldspar in the white ware production. Clay-feldspar-quartz porcelains are referred to as triaxial white ware. Specimens of semidry triaxial mixtures, where feldspar was substituted for different percentages of CTA, were prepared by uniaxial pressing, followed by drying and sintering. Physical and mechanical properties of sintered bodies were evaluated. The porosity and the compressive strength of the fired pieces do increase with additions of up to 75% of CTA in substitution of feldspar. Their mineralogical phases were determined by DRX and SEM; grains of quartz, and needles of primary and secondary mullite were identified in a vitreous phase. It was concluded that feldspar can be substituted positively by CTA in white ware pastes. (Author) 22 refs.

The Pr and Ca substitution in GdBa2Cu3O7-8

International Nuclear Information System (INIS)

Shakeri, H.; Akhavan, M.

2002-01-01

The granular Gd 1 -x-zPr x Ca z Ba 2 Cu 3 O 7 -8 (Gd Pr Ca-123) high-temperature cuprate samples with 0.0≤x≤0.3 and 0.0≤z≤0.35 are prepared by standard solid state reaction and characterized by XRD and SEM techniques. The BaCuO 2 and impurity phases are less than 1% in the samples having high levels of Pr and Ca concentrations. The electrical resistivity measurements show a nonlinear reduction in T c (x,z=etc) versus x. Moreover, the T c (z) curve with x=0 is nonlinear and a plateau appears at z≅0.05-0.015. For Pr-Ca-doped samples with a constant concentration of Pr, T c increases with the increase of Ca up to an optimum value of Ca doping and then in decreases. Based on these observations, we suggest that hole filling and hole localization the main effects of Pr ion substitution. The magnetic measurements indicate that the value of H C 1 is in the order of 10 m T. The magnetoresistance measurements have been measured and analyzed. The superconducting transition region is broadened by the application of magnetic field. The experimental data near the on sen of superconductivity are fitted with the Ambegakor and Halperin (A H) phase-slip model. We observe that the A H parameter, γ(H), depends not only on the temperature and the magnetic field, but also on the Pr and Ca ions concentrations. It is observed that the critical current density increases with Ca substitution and decreases with pr substitution in Gd-123 system. We suggest that the pr ion substitution probably enhances the weak link, but the Ca ion acts as flux pinning center in the Gd Pr Ca-123 system

A General Catalytic Method for Highly Cost- and Atom-Efficient Nucleophilic Substitutions.

Science.gov (United States)

Huy, Peter H; Filbrich, Isabel

2018-05-23

A general formamide-catalyzed protocol for the efficient transformation of alcohols into alkyl chlorides, which is promoted by substoichiometric amounts (down to 34 mol %) of inexpensive trichlorotriazine (TCT), is introduced. This is the first example of a TCT-mediated dihydroxychlorination of an OH-containing substrate (e.g., alcohols and carboxylic acids) in which all three chlorine atoms of TCT are transferred to the starting material. The consequently enhanced atom economy facilitates a significantly improved waste balance (E-factors down to 4), cost efficiency, and scalability (>50 g). Furthermore, the current procedure is distinguished by high levels of functional-group compatibility and stereoselectivity, as only weakly acidic cyanuric acid is released as exclusive byproduct. Finally, a one-pot protocol for the preparation of amines, azides, ethers, and sulfides enabled the synthesis of the drug rivastigmine with twofold S N 2 inversion, which demonstrates the high practical value of the presented method. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nucleophilic Substitution and Redox Reactions with alpha-Chloro beta-Oxo Sulfenyl Chlorides

DEFF Research Database (Denmark)

El-Essawy, Farag A.G.; Yassin, Salah M.; El-Sakka, Ibrahim A.

1998-01-01

Alpha-Chloro sulfenyl chlorides such as 1 and 4 could not be reduced to the corresponding disulfides. Under reducing conditions they are instead dechlorinated to the corresponding thiocarbonyl compounds. Starting from the chroman-4-one derivatives 1 a number of 1,3,4-oxadithiins 3 have been prepa...

Synthesis of N-substituted a,a-difluoro-b-aminophosphonates by addition of diethyl lithiodifluoromethylphosphonate to imines

Czech Academy of Sciences Publication Activity Database

Cherkupally, Prabhakar; Beier, Petr

2012-01-01

Roč. 141, Sep (2012), s. 76-82 ISSN 0022-1139 R&D Projects: GA ČR GP203/08/P310 Institutional support: RVO:61388963 Keywords : nucleophilic addition * difluorophosphonate * aminophosphonate * imines Subject RIV: CC - Organic Chemistry Impact factor: 1.939, year: 2012

From political controversy to a technical problem? Fifteen years of opioid substitution treatment in Finland.

Science.gov (United States)

Selin, Jani; Hakkarainen, Pekka; Partanen, Airi; Tammi, Tuukka; Tigerstedt, Christoffer

2013-11-01

The aim of the article is to analyze changes in opioid substitution treatments (OST) in Finland. OST spread in Finland in the late 1990s and early 2000s (Phase 1). Since then, OST has become an integrated part of Finnish drug policy and is provided in various substance abuse treatment units as well as in municipal health centers (Phase 2). The paper analyses the policy around the implementation of opioid substitution treatment in Finland, focusing on identifying the key factors and the relations between them that have contributed to the implementation of OST in Finland. OST has become accepted in Finland during the past ten years as a crucial element of a harm reduction strategy. Present incentives behind this development are not as clearly related to drug-specific policies as in the late 1990s; rather, they stem from both the restructuring of health care services (e.g. cost-effectiveness) and the strengthening of the medical or technico-administrative approach to the development of OST. Since the early 2000s, the development of substitution treatment in Finland has not taken place under explicit drug-political guidance, but largely as a result of many differing intended and unintended effects. One of the unintended effects is the fact that buprenorphine has replaced heroin as the most commonly misused opioid in Finland. Copyright © 2013 Elsevier B.V. All rights reserved.

Improving the Performance of Lithium Manganese Phosphate Through Divalent Cation Substitution

Energy Technology Data Exchange (ETDEWEB)

Chen, Guoying; Richardson, Thomas J.

2008-03-03

Highly crystalline samples of LiMnPO{sub 4} and its analogs with partial substitution of Mn by divalent Mg, Cu, Zn, and Ni were prepared by hydrothermal synthesis and characterized by x-ray diffraction and infrared spectroscopy. Chemical oxidation produced two-phase mixtures of the initial phases LiMn{sub (1-y)}M{sub y}PO{sub 4} and the delithiated forms, Li{sub y}Mn{sub (1-y)}M{sub y}PO{sub 4}, all with the olivine structure. The extent of oxidation depended upon the quantity of oxidizing agent used and on the identity of the substituent ions. Mg, Ni and Cu were found to increase the level of delithation relative to that in pure LiMnPO{sub 4}. Mg was also shown to reduce the tendency of the oxidized phase to absorb water.

Chemical bonding and magnetic properties of gadolinium (Gd) substituted cobalt ferrite

International Nuclear Information System (INIS)

Puli, Venkata Sreenivas; Adireddy, Shiva; Ramana, C.V.

2015-01-01

Graphical abstract: Room temperature Raman spectra of CoFe 2−x Gd x O 4 (CFGO, x = 0.0–0.3) compounds as a function of wavenumber (cm −1 ). - Highlights: • Gd substituted ferrites were synthesized under controlled concentration. • Gd ion induced lattice dynamical changes are significant. • Enhanced magnetization is observed upon Gd-incorporation in cobalt ferrite. • A correlation between lattice dynamics and magnetic properties is established. - Abstract: Polycrystalline gadolinium (Gd) substituted cobalt ferrites (CoFe 2−x Gd x O 4 ; x = 0–0.3, referred to CFGO) ceramics have been synthesized by solid state reaction method. Chemical bonding, crystal structure and magnetic properties of CFGO compounds have been evaluated as a function of Gd-content. X-ray diffraction (XRD) and Raman spectroscopic analyses confirmed the formation of inverse spinel cubic structure. However, a secondary ortho-ferrite phase (GdFeO 3 ) nucleates for higher values of Gd-content. A considerable increase in the saturation magnetization has been observed upon the initial substitution of Gd (x = 0.1). The saturation magnetization drastically decreases at higher Gd content (x ⩾ 0.3). No contribution from ortho-ferrite GdFeO 3 phase is noted to the magnetic properties. The increase in the magnetic saturation magnetization is attributed to the higher magnetic moment of Gd 3+ (4f 7 ) residing in octahedral sites is higher when compared to that of Fe 3+ (3d 5 ) and as well due to the migration of Co 2+ (3d 7 ) ions from the octahedral to the tetrahedral sites with a magnetic moment aligned anti-parallel to those of rare earth (RE 3+ ) ions in the spinel lattice. Increase in coercivity with increase in Gd 3+ is content is attributed to magnetic anisotropy in the ceramics

Substitutes for School Nurses in Illinois

Science.gov (United States)

Vollinger, Linda Jeno; Bergren, Martha Dewey; Belmonte-Mann, Frances

2011-01-01

The purpose of this descriptive study was to explore utilization of nurse substitutes in the school setting in Illinois. The literature described personnel who staff the school health office in the absence of the school nurse and the barriers to obtaining nurse substitutes. There were no empirical studies conducted on school nurse substitutes in…

Structural and chemical reactivity modifications of a cobalt perovskite induced by Sr-substitution. An in situ XAS study

International Nuclear Information System (INIS)

Hueso, Jose L.; Holgado, Juan P.; Pereñíguez, Rosa; Gonzalez-DelaCruz, V.M.; Caballero, Alfonso

2015-01-01

LaCoO 3 and La 0.5 Sr 0.5 CoO 3−δ perovskites have been studied by in situ Co K-edge XAS. Although the partial substitution of La(III) by Sr(II) species induces an important increase in the catalytic oxidation activity and modifies the electronic state of the perovskite, no changes could be detected in the oxidation state of cobalt atoms. So, maintaining the electroneutrality of the perovskite requires the generation of oxygen vacancies in the network. The presence of these vacancies explains that the substituted perovskite is now much more reducible than the original LaCoO 3 perovskite. As detected by in situ XAS, after a consecutive reduction and oxidation treatment, the original crystalline structure of the LaCoO 3 perovskite is maintained, although in a more disordered state, which is not the case for the Sr doped perovskite. So, the La 0.5 Sr 0.5 CoO 3−δ perovskite submitted to the same hydrogen reduction treatment produces metallic cobalt, while as determined by in situ XAS spectroscopy the subsequent oxidation treatment yields a Co(III) oxide phase with spinel structure. Surprisingly, no Co(II) species are detected in this new spinel phase. - Highlights: • A Sr-substituted lanthanum cobalt perovskite has been prepared by spray pyrolysis. • It has been established that Co(III) cations are present in both perovskites. • LaCoO 3 is a less reducible phase than the substituted La 0.5 Sr 0.5 CoO 3−δ . • After reoxidation of reduced La 0.5 Sr 0.5 CoO 3−δ , a 100% Co(III) spinel is obtained

Modeling competitive substitution in a polyelectrolyte complex

International Nuclear Information System (INIS)

Peng, B.; Muthukumar, M.

2015-01-01

We have simulated the invasion of a polyelectrolyte complex made of a polycation chain and a polyanion chain, by another longer polyanion chain, using the coarse-grained united atom model for the chains and the Langevin dynamics methodology. Our simulations reveal many intricate details of the substitution reaction in terms of conformational changes of the chains and competition between the invading chain and the chain being displaced for the common complementary chain. We show that the invading chain is required to be sufficiently longer than the chain being displaced for effecting the substitution. Yet, having the invading chain to be longer than a certain threshold value does not reduce the substitution time much further. While most of the simulations were carried out in salt-free conditions, we show that presence of salt facilitates the substitution reaction and reduces the substitution time. Analysis of our data shows that the dominant driving force for the substitution process involving polyelectrolytes lies in the release of counterions during the substitution

2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile

Directory of Open Access Journals (Sweden)

Nawal Mishriky

2013-02-01

Full Text Available 2-(4-Methylpiperazin-1-yl-4-phenyl-6-(thiophen-2-yl-pyridine-3-carbonitrile (4 was synthesized via nucleophilic substitution reaction of 1-methylpiperazine with 2-bromo analogue 3. The latter was obtained through bromination (Br2/AcOH of 2-[3-oxo-1-phenyl-3-(thiophen-2-ylpropyl]malononitrile (2.

Substitutional analysis

CERN Document Server

Rutherford, Daniel Edwin

2013-01-01

Classic monograph, suitable for advanced undergraduates and graduate students. Topics include calculus of permutations and tableaux, semi-normal representation, orthogonal and natural representations, group characters, and substitutional equations. 1968 edition.

Effects of solvent and structure on the reactivity of 6-substituted nicotinic acids with diazodiphenylmethane in aprotic solvents

Directory of Open Access Journals (Sweden)

BRATISLAV Ž. JOVANOVIĆ

2009-12-01

Full Text Available The rate constants for the reactions of diazodiphenylmethane (DDM with 6-substituted nicotinic acids in aprotic solvents at 30 °C were determined. The obtained second order rate constants in aprotic solvents, together with literature data for benzoic and nicotinic acids in protic solvents, were used for the calculation of solvent effects, employing the Kamlet-Taft solvatochromic equation (linear solvation energy relationship – LSER in the form: log k = log k0 + s* + a + b. The correlations of the kinetic data were performed by means of multiple linear regression analysis taking appropriate solvent parameters. The sign of the equation coefficients (s, a and b were in agreement with the postulated reaction mechanism, and the mode of the solvent influences on the reaction rate is discussed based on the correlation results. A similar contribution of the non-specific solvent effect and electrophilic solvation was observed for all acids, while the highest contribution of nucleophilic solvation was influenced by their high acidity. Correlation analysis of the rate data with substituent p parameters in an appropriate solvent using the Hammett equation was also performed. The substituent effect on the acid reactivity was higher in aprotic solvents of higher dipolarity/polarizability. The mode of the transmission of the substituent effect is discussed in light of the contribution of solute–solvent interaction on the acid reactivity.

Aryl substitution of pentacenes

Directory of Open Access Journals (Sweden)

Andreas R. Waterloo

2014-07-01

Full Text Available A series of 11 new pentacene derivatives has been synthesized, with unsymmetrical substitution based on a trialkylsilylethynyl group at the 6-position and various aryl groups appended to the 13-position. The electronic and physical properties of the new pentacene chromophores have been analyzed by UV–vis spectroscopy (solution and thin films, thermoanalytical methods (DSC and TGA, cyclic voltammetry, as well as X-ray crystallography (for 8 derivatives. X-ray crystallography has been specifically used to study the influence of unsymmetrical substitution on the solid-state packing of the pentacene derivatives. The obtained results add to our ability to better predict substitution patterns that might be helpful for designing new semiconductors for use in solid-state devices.

Aryl substitution of pentacenes

Science.gov (United States)

Waterloo, Andreas R; Sale, Anna-Chiara; Lehnherr, Dan; Hampel, Frank

2014-01-01

Summary A series of 11 new pentacene derivatives has been synthesized, with unsymmetrical substitution based on a trialkylsilylethynyl group at the 6-position and various aryl groups appended to the 13-position. The electronic and physical properties of the new pentacene chromophores have been analyzed by UV–vis spectroscopy (solution and thin films), thermoanalytical methods (DSC and TGA), cyclic voltammetry, as well as X-ray crystallography (for 8 derivatives). X-ray crystallography has been specifically used to study the influence of unsymmetrical substitution on the solid-state packing of the pentacene derivatives. The obtained results add to our ability to better predict substitution patterns that might be helpful for designing new semiconductors for use in solid-state devices. PMID:25161729

A-site substitution effect of strontium on bismuth layered CaBi4Ti4O15 ceramics on electrical and piezoelectric properties

International Nuclear Information System (INIS)

Tanwar, Amit; Verma, Maya; Gupta, Vinay; Sreenivas, K.

2011-01-01

Strontium substituted CaBi 4 Ti 4 O 15 ceramics with the chemical formula Ca 1-x Sr x Bi 4 Ti 4 O 15 (CSBT) (x = 0.0-1.0) have been prepared through conventional solid state route. The formation of single phase material with orthorhombic structure was verified from X-ray diffraction with incorporation of Sr substitution. Decrease in a-axis displacement of Bi ion in the perovskite structure in the CSBT ceramics were observed from the relative changes in soft mode (20 cm -1 ) in the Raman spectra, and increase in Sr incorporation shows the shift in ferroelectric to paraelectric phase transition temperature. The dielectric properties for all the CSBT ceramic compositions are studied as a function of temperature over the frequency range of 100 Hz-1 MHz. Curie's temperature was found to be function of Sr substitution and with increase in the Sr concentration the phase transition becomes sharper and phase transition temperature gets shifted towards lower temperature (790-545 deg. C). The behavior of ac conductivity as a function of frequency (100 Hz-1 MHz) at low temperature ( 33 ) whereas piezoelectric charge coefficient values were found comparable to that of PZT at room temperature. Relative changes in soft modes due to Sr incorporation results in high piezoelectricity in the CSBT ceramics.

Crystallinity and electrical properties of neodymium-substituted bismuth titanate thin films

International Nuclear Information System (INIS)

Chen, Y.-C.; Hsiung, C.-P.; Chen, C.-Y.; Gan, J.-Y.; Sun, Y.-M.; Lin, C.-P.

2006-01-01

We report on the properties of Nd-substituted bismuth titanate Bi 4-x Nd x Ti 3 O 12 (BNdT) thin films for ferroelectric non-volatile memory applications. The Nd-substituted bismuth titanate thin films fabricated by modified chemical solution deposition technique showed much improved properties compared to pure bismuth titanate. A pyrochlore free crystalline phase was obtained at a low annealing temperature of 640 deg. C and grain size was found to be considerably increased as the annealing temperature increased. The film properties were found to be strongly dependent on the Nd content and annealing temperatures. The measured dielectric constant of BNdT thin films was in the range 172-130 for Bi 4-x Nd x Ti 3 O 12 with x 0.0-0.75. Ferroelectric properties of Nd-substituted bismuth titanate thin films were significantly improved compared to pure bismuth titanate. For example, the observed 2P r and E c for Bi 3.25 Nd 0.75 Ti 3 O 12 , annealed at 680 deg. C, were 38 μC/cm 2 and 98 kV/cm, respectively. The improved microstructural and ferroelectric properties of BNdT thin films suggest their suitability for high density ferroelectric random access memory applications

Synthesis of Novel Fluorescent Sensors Based on Naphthalimide Fluorophores for the Highly Selective Hg2+-Sensing

Directory of Open Access Journals (Sweden)

Yordkhuan Tachapermpon

2015-01-01

Full Text Available With an aim to develop the new sensors for optical detection of Hg2+ ions, two novel fluorometric sensors were designed and successfully prepared using 2-(3-(2-aminoethylsulfanylpropylsulfanylethanamine and one or two N-methylnaphthalimide moieties (1 and 2. Sensor 1 was obtained via N-alkylation, N-imidation and a one-pot nucleophilic aromatic substitution, and N-formylation of the amine, while sensor 2 was prepared via N-alkylation, N-imidation, and nucleophilic aromatic substitution. The characterization, including 1H NMR, 13C NMR, and mass spectrometry, was then performed for 1 and 2. The Hg2+-binding behaviors of the sensors were investigated in terms of sensitivity and selectivity by fluorescence spectroscopy. Sensor 1 especially provided the reversible and highly Hg2+-selective ON-OFF fluorescence behavior by discriminating various interfering ions such as Pb2+, Co2+, Cd2+, Mn2+, Fe2+, K+, Na+, and in particular Cu2+ and Ag+ with a detection limit of 22 ppb toward Hg2+ ions.

Computational study of cation substitutions in apatites

International Nuclear Information System (INIS)

Tamm, Toomas; Peld, Merike

2006-01-01

Density-functional theory plane-wave modeling of fluor- and hydroxyapatites has been performed, where one or two calcium ions per unit cell were replaced with cadmium or zinc cations. It was found that cadmium ions favor Ca(1) positions in fluorapatites and Ca(2) positions in hydroxyapatites, in agreement with experiment. A similar pattern is predicted for zinc substitutions. In the doubly substituted cases, where only hydroxyapatites were modeled, a preference for the substituting ions to be located in Ca(2) position was also observed. Displacement of the hydroxide ions from their symmetrical positions on the hexagonal axis can be used to explain the preferred configurations of substituting ions around the axis. -- Deformation of the hydroxide ion chain due to substitutions around the ion channel in substituted hydroxyapatites

Influences of Ti4+ and Mg2+ substitutions on the properties of lithium ferrites

International Nuclear Information System (INIS)

Su Hua; Zhang Huaiwu; Tang Xiaoli; Liu Baoyuan

2009-01-01

The Ti 4+ and Mg 2+ co-substituted lithium ferrites with different compositions of Zn 0.1 Li 0.45 Mn 0.1 Fe 2.35-2x (TiMg) x O 4 (x=0.0-0.5) were prepared by the ceramic standard processing. The magnetic properties and microstructure of the samples were investigated. A single phase spinel structure was confirmed by XRD in substituting range. Sintering densities continuously decreased with the increase at x value, which was attributed to the fact that the heavier Fe 3+ ions were replaced by the relatively lighter Ti 4+ and Mg 2+ ions. However, relative density of the samples had no obvious relationship with the substituting value. Saturation magnetization continuously decreased with x value, which was attributed to the decrease of resultant magnetic moment between A and B sub-lattice. Remanence decreased monotonously with x value due to the decrease of saturation magnetization and magnetocrystalline anisotropy constant. But the effect of Ti 4+ and Mg 2+ substitutions on the Br/Bs ratio values was not obvious. Coercive force was mainly determined by the microstructure and magnetocrystalline anisotropy constant of the ferrites. In this research, with the increase of Ti 4+ and Mg 2+ substitutions, the advantageous influence by the decrease of magnetocrystalline anisotropy constant was more significant than the disadvantageous influence caused by the increase of closed pores. As a result, coercive force of the ferrites also decreased monotonously with the increase at x value.

La Substitution and Pressure Studies on CeCoSi: A Possible Antiferroquadrupolar Ordering Induced by Pressure

Science.gov (United States)

Tanida, Hiroshi; Muro, Yuji; Matsumura, Takeshi

2018-02-01

The La-substitution and pressure effects on antiferromagnet CeCoSi with a tetragonal crystal structure were investigated in order to clarify the origin of the pressure induced ordered phase (PIOP) with an enormously high transition temperature of T0 ˜ 38 K. By substituting Ce with La, the PIOP shifts to high pressures, and the maximum value of T0 is suppressed, indicating that the PIOP originates from a Ce-Ce interaction. At T0, the magnetic susceptibility exhibits not a cusp, but an increase with decreasing temperature, as is frequently observed in antiferroquadrupolar (AFQ) ordering. Based on these results, we propose that a possible origin of the PIOP is an AFQ ordered phase of Ce-4f electron. Due to the lack of local inversion symmetry at the Ce sites, the AFQ order could be accompanied by odd parity multipolar moments. Since there is no clear evidence of successive transitions below T0, the remaining Kramers degeneracy could be lifted by the Kondo coupling.

Use of limonene in countercurrent chromatography: a green alkane substitute.

Science.gov (United States)

Faure, Karine; Bouju, Elodie; Suchet, Pauline; Berthod, Alain

2013-05-07

Counter-current chromatography (CCC) is a preparative separation technique working with the two liquid phases of a biphasic liquid system. One phase is used as the mobile phase when the other, the stationary phase, is held in place by centrifugal fields. Limonene is a biorenewable cycloterpene solvent coming from orange peel waste. It was evaluated as a possible substitute for heptane in CCC separations. The limonene/methanol/water and heptane/methanol/water phase diagrams are very similar at room temperature. The double bonds of the limonene molecule allows for possible π-π interactions with solutes rendering limonene slightly more polar than heptane giving small differences in solute partition coefficients in the two systems. The 24% higher limonene density is a difference with heptane that has major consequences in CCC. The polar and apolar phases of the limonene/methanol/water 10/9/1 v/v have -0.025 g/cm(3) density difference (lower limonene phase) compared to +0.132 g/cm(3) with heptane (upper heptane phase). This precludes the use of this limonene system with hydrodynamic CCC columns that need significant density difference to retain a liquid stationary phase. It is an advantage with hydrostatic CCC columns because density difference is related to the working pressure drop: limonene allows one to work with high centrifugal fields and moderate pressure drop. Limonene has the capability to be a "green" alternative to petroleum-based solvents in CCC applications.

Currency substitution in Eastern Europe

NARCIS (Netherlands)

van Aarle, B.; Budina, N.

1995-01-01

Monetary instability during the transition process from a command economy to a market economy has induced a considerable increase in currency substitution in Eastern Europe. Currency substitution itself affects monetary stability since it reduces the stability of velocity. This paper investigates

Structural and magnetic properties correlated with cation distribution of Mo-substituted cobalt ferrite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Heiba, Z.K. [Faculty of Science, Taif University, P.O. Box: 888, Al-Haweiah, Taif (Saudi Arabia); Physics Department, Faculty of Science, Ain Shams University, Cairo (Egypt); Mostafa, Nasser Y., E-mail: nmost69@yahoo.com [Faculty of Science, Taif University, P.O. Box: 888, Al-Haweiah, Taif (Saudi Arabia); Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt); Abd-Elkader, Omar H. [Department of Zoology, Science College, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Electron Microscope and Thin Films Department, National Research Center (NRC), El-Behooth Street, Dokki, Cairo 12622 (Egypt)

2014-11-15

Mo-substituted cobalt ferrite nanoparticles; CoFe{sub 2−2x}Mo{sub x}O{sub 4} (0.0≤x≤0.3) were prepared by a one-step solution combustion synthesis technique. The reactants were metal nitrates and glycine as a fuel. The samples were characterized using an X-ray diffraction (XRD), a transmission electron microscope (TEM) and a vibrating sample magnetometer (VSM). XRD analysis revealed a pure single phase of cubic spinel ferrites for all samples with x up to 0.3. The lattice parameter decreases with Mo{sup 6+} substitution linearly up to x=0.15, then nonlinearly for x≥0.2. Rietveld analysis and saturation magnetization (M{sub s}) revealed that Mo{sup 6+} replaced Fe{sup 3+} in the tetrahedral A-sites up to x=0.15, then it replaced Fe{sup 3+} in both A-sites and B-sites for x≥0.2. The saturation magnetization (M{sub s}) increases with increasing Mo{sup 6+} substitution up to x=0.15 then decreases. The crystallite size decreased while the microstrain increased with increasing Mo{sup 6+} substitution. Inserting Mo{sup 6+} produces large residents of defects and cation vacancies. - Highlights: • Nano-sized Mo-substituted cobalt ferrite CoFe{sub 2−2x}Mo{sub x}O{sub 4} (0.0≤x≤0.3) were prepared by solution combustion. • The change in M{sub s} with increasing Mo-substitution was investigated. • The cations distributions of ferrites were obtained from Rietveld analysis. • Inserting Mo{sup 6+} produces large residents of defects and cation vacancies.

Chitosan Dermal Substitute and Chitosan Skin Substitute Contribute to Accelerated Full-Thickness Wound Healing in Irradiated Rats

Directory of Open Access Journals (Sweden)

Abu Bakar Mohd Hilmi

2013-01-01

Full Text Available Wounds with full-thickness skin loss are commonly managed by skin grafting. In the absence of a graft, reepithelialization is imperfect and leads to increased scar formation. Biomaterials can alter wound healing so that it produces more regenerative tissue and fewer scars. This current study use the new chitosan based biomaterial in full-thickness wound with impaired healing on rat model. Wounds were evaluated after being treated with a chitosan dermal substitute, a chitosan skin substitute, or duoderm CGF. Wounds treated with the chitosan skin substitute showed the most re-epithelialization (33.2 ± 2.8%, longest epithelial tongue (1.62 ± 0.13 mm, and shortest migratory tongue distance (7.11 ± 0.25 mm. The scar size of wounds treated with the chitosan dermal substitute (0.13 ± 0.02 cm and chitosan skin substitute (0.16 ± 0.05 cm were significantly decreased (P<0.05 compared with duoderm (0.45 ± 0.11 cm. Human leukocyte antigen (HLA expression on days 7, 14, and 21 revealed the presence of human hair follicle stem cells and fibroblasts that were incorporated into and surviving in the irradiated wound. We have proven that a chitosan dermal substitute and chitosan skin substitute are suitable for wound healing in full-thickness wounds that are impaired due to radiation.

Structural and magnetic properties of Co substituted Li{sub 0.5}Fe{sub 2.5}O{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Patil, R.P., E-mail: raj_rbm_raj@yahoo.co.in [Department of Chemistry, M.H. Shinde Mahavidyalaya, Tisangi 416206, MH (India); Patil, S.B. [Department of Physics, Krantisinh Nana Patil College Walwa, Sangli 416313, MH (India); Jadhav, B.V. [Department of Chemistry, Changu Kana Thakur Arts, Commerce and Science College, New Panvel 400035, MH (India); Delekar, S.D.; Hankare, P.P. [Department of Chemistry, Shivaji University, Kolhapur 416004, MH (India)

2016-03-01

Nanocrystalline Li{sub 0.5}Fe{sub 2.5−x}Co{sub x}O{sub 4} (2.5≥x≥0) system was prepared by sol–gel route. Formation of single phase cubic spinel structure for all the compositions was confirmed from their X-ray diffraction studies. These ferrite samples existed as homogenous and uniform grains as observed from Scanning Electron Microscopy technique. The magnetic studies indicated that, the ferrimagnetic behavior decreases with Cobalt substitution. In general, the substitution of cobalt plays an important role in changing the structural and magnetic properties of these ferrites. - Highlights: • Novel Co doped Li{sub 0.5}Fe{sub 2.5}O{sub 4} system. • Sol–gel method synthesized Co–Lithium ferrites. • Single Phase Cubic spinel structure. • Homogenous and uniform grain size of samples. • Ferrimagnetic behavior for all the samples.

Substitution between cars within the household

DEFF Research Database (Denmark)

De Borger, Bruno; Mulalic, Ismir; Rouwendal, Jan

2016-01-01

In this paper we study the demand for car kilometres in two-car households, focusing on the substitution between cars of different fuel efficiency in response to fuel price changes. We use a large sample of detailed Danish data on two-car households to estimate – for each car owned by the household...... – own and cross-price effects of increases in fuel costs per kilometre. The empirical results show that failure to capture substitution between cars within the household can result in substantial misspecification biases. Ignoring substitution, the basic model yielded fuel price elasticities of 0.......98 and 1.41 for the primary and secondary cars, respectively. Accounting for substitution effects, these figures reduce to, respectively, 0.32 and 0.45. Consistent with substitution behaviour, we find that the fuel price elasticity of fuel demand exceeds the elasticity of kilometre demands with respect...

Elasticity of Substitution and Antidumping Measures

DEFF Research Database (Denmark)

Drud Hansen, Jørgen; Meinen, Philipp; Nielsen, Jørgen Ulff-Møller

Abstract This paper analyzes the role of the elasticity of substitution for anti-dumping decisions across countries. In monopolistic competition models with cost heterogeneous firms across countries, price differences vary inversely with the elasticity of substitution. Anti-dumping duties should...... therefore also vary inversely with the elasticity of substitution at least for countries which have a strong focus on prices in the determination of their anti-dumping measures. We test this for ten countries from 1990 to 2009 using data on anti-dumping from Chad Bown (2010) and US-data at 8-digit level...... in our empirical investigation support the predicted role of the elasticity of substitution as we find a significant negative relation between the elasticity of substitution and the final anti-dumping duties for the ‘lesser duty rule’ group of countries. The countries which do not follow the ‘lesser duty...

Effects of the substitution of iron for cobalt on the crystal and magnetic properties of PrCo4-xFexM (M=Al and Ga)

International Nuclear Information System (INIS)

Zlotea, C.; Isnard, O.

2003-01-01

We report on the structural and magnetic properties of PrCo 4-x Fe x M where x=0-4 and M=Al and Ga. The iron solubility limit in these phases is determined by means of X-ray diffraction and scanning electron microscopy. Our study confirms that single phase samples crystallizing in the CaCu 5 -type structure are stabilized for x 5 structure but with a slight preference for the 3g site. The saturation magnetization and the Curie temperature increase upon the iron substitution. The PrCo 4-x Fe x M compounds present spin reorientation transitions, whatever the substituting M and the Fe content. The substitution of iron for cobalt induces a significant increase of the spin reorientation temperature. Neutron and X-ray powder diffraction experiments as well as magnetic measurements are combined in order to clarify the effects of the presence of iron on the magnetocrystalline anisotropy and the spin reorientation transition. Finally, the magnetic phase diagrams of PrCo 4-x Fe x M (M=Al and Ga) have been determined in the whole ordered temperature range

Biological background of dermal substitutes

NARCIS (Netherlands)

van der Veen, V. C.; van der Wal, M.B.; van Leeuwen, M.C.; Ulrich, M.; Middelkoop, E.

2010-01-01

Dermal substitutes are of major importance in treating full thickness skin defects, both in acute and chronic wounds. In this review we will outline specific requirements of three classes of dermal substitutes:-natural biological materials, with a more or less intact extracellular matrix

Chiral 1,2- and 1,3-diol-functionalized chromophores as Lego building blocks for coupled structures.

Science.gov (United States)

Spange, Stefan; Hofmann, Katja; Walfort, Bernhard; Rüffer, Tobias; Lang, Heinrich

2005-10-14

Chiral nitroanilines containing 1,2- or 1,3-diol functionalities have been synthesized by nucleophilic aromatic substitution of fluoronitroanilines with 1-aminopropane-2,3-diols and 2-aminopropane-1,3-diol in the melt. X-ray structure analyses confirm retention of the configuration of the chiral center. The novel chromophores are suitable to link reversibly to various substituted arylboronic acids which allows the construction of new solvatochromic sensor molecules suitable to response to solvent and anion coordination by fluoride. The solvatochromism of the new compounds has been studied using the Kamlet-Taft LSE relationship.

4,4’-Bis(4-octylphenoxy)-2,2’-bipyridine

OpenAIRE

Zhen-Ting Du; Jun-Ru Wang; Ru Liu; Yan Xu

2009-01-01

4,4’-Bis(4-octylphenoxy)-2,2’-bipyridine which can be used in complexes of ruthenium was synthesized. This ligand bears a long chain for the purpose of increasing the solubility of the final complex. The synthesis was achieved through a nucleophilic aromatic substitution reaction of 4,4’-bromo-2,2’-bipyridine and 4-octylphenol.

A-site substitution effect of strontium on bismuth layered CaBi{sub 4}Ti{sub 4}O{sub 15} ceramics on electrical and piezoelectric properties

Energy Technology Data Exchange (ETDEWEB)

Tanwar, Amit, E-mail: amit07tanwar@gmail.com [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Verma, Maya; Gupta, Vinay; Sreenivas, K. [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India)

2011-10-17

Strontium substituted CaBi{sub 4}Ti{sub 4}O{sub 15} ceramics with the chemical formula Ca{sub 1-x}Sr{sub x}Bi{sub 4}Ti{sub 4}O{sub 15} (CSBT) (x = 0.0-1.0) have been prepared through conventional solid state route. The formation of single phase material with orthorhombic structure was verified from X-ray diffraction with incorporation of Sr substitution. Decrease in a-axis displacement of Bi ion in the perovskite structure in the CSBT ceramics were observed from the relative changes in soft mode (20 cm{sup -1}) in the Raman spectra, and increase in Sr incorporation shows the shift in ferroelectric to paraelectric phase transition temperature. The dielectric properties for all the CSBT ceramic compositions are studied as a function of temperature over the frequency range of 100 Hz-1 MHz. Curie's temperature was found to be function of Sr substitution and with increase in the Sr concentration the phase transition becomes sharper and phase transition temperature gets shifted towards lower temperature (790-545 deg. C). The behavior of ac conductivity as a function of frequency (100 Hz-1 MHz) at low temperature (<500 deg. C) follows the power law and attributed to hopping conduction mechanism. Sr substitution results in the increase in piezoelectric coefficients (d{sub 33}) whereas piezoelectric charge coefficient values were found comparable to that of PZT at room temperature. Relative changes in soft modes due to Sr incorporation results in high piezoelectricity in the CSBT ceramics.

Analysis of the structure and Mössbauer study of the neodymium substitution in the Sr-hexaferrite

Energy Technology Data Exchange (ETDEWEB)

Pérez-Juache, T.J. [Departamento de Ingeniería de Procesos e Hidráulica, Universidad Autónoma Metropolitana-Iztapalapa, A.P. 55-534, 09340 México D.F., México (Mexico); Guerrero, A.L., E-mail: azdlobo@gmail.com [Facultad de Ciencias, UASLP, Salvador Nava Martínez, s/n. Zona Universitaria, 78290 San Luis Potosí S.L.P., México (Mexico); Cabal-Velarde, J.G. [Instituto Tecnológico Superior de Irapuato, Carretera Irapuato-Silao Km. 12.5. Irapuato, Guanajuato, México (Mexico); Mirabal-García, M. [Instituto de Física, UASLP, Dr. Manuel Nava No. 6. Zona Universitaria, 78290 San Luis Potosí S.L.P., México (Mexico); Palomares-Sánchez, S.A. [Facultad de Ciencias, UASLP, Salvador Nava Martínez, s/n. Zona Universitaria, 78290 San Luis Potosí S.L.P., México (Mexico); Matutes-Aquino, J.A. [Centro de Investigación en Materiales Avanzados, Ave. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, Ch. México, México (Mexico)

2016-12-15

This work reads on the obtainment of the strontium hexaferrite substituted with neodymium in its pure phase using the solid state reaction method. The solubility of neodymium on the strontium hexaferrite was investigated according with the formula Sr{sub 1−x}Nd{sub x}Fe{sub 12}O{sub 19}, for x=0.00, 0.05, 0.10, 0.15, 0.20 and 0.25. Results indicate that neodymium is soluble in the hexaferrite until x=0.15. In samples with higher neodymium content there are traces of secondary phases. Analysis of magnetic and structural properties was performed in function of the neodymium content, always in its solubility range. From the structural properties, it was observed that the addition of a little neodymium quantity in the Sr-hexaferrite causes an important reduction of the unit cell volume. Also, magnetic properties are strongly linked to the structural behavior, in this case a trend to reduce the magnetization of the samples was detected when neodymium content increased, which can be explained in terms of fluctuations of the superexchange coupling conducted by the neodymium interactions with the structure. Mössbauer analysis was carried out in order to analyze the effects of the neodymium substitution on the hyperfine parameters, as well as to confirm the preferential site of the neodymium substitution in the Sr-hexaferrite.

Mechanistic Insights into the Organopolymerization of N-Methyl N-Carboxyanhydrides Mediated by N-Heterocyclic Carbenes

KAUST Repository

Falivene, Laura

2016-10-04

We report on a DFT investigation of initiation, propagation, and termination in the organopolymerization of N-methyl N-carboxyanhydrides toward cyclic poly(N-substituted glycine)s, promoted by N-heterocyclic carbenes (NHC). Calculations support the experimentally based hypothesis of two competing initiation pathways. The first leading to formation of a zwitterionic adduct by nucleophilic addition of the NHC to one of the carbonyl groups of monomer. The second via acid–base reactivity, starting with the NHC promoted abstraction of a proton from the methylene group of the monomer, leading to an ion-pair-type adduct, followed by nucleophilic attack of the adduct to a new monomer molecule. Chain elongation can proceed from both the initiation adducts via nucleophilic attack of the carbamate chain-end to a new monomer molecule via concerted elimination of CO2 from the carbamate chain-end. Energy barriers along all the considered termination pathways are remarkably higher that the energy barrier along the chain elongation pathways, consistent with the quasi-living experimental behavior. Analysis of the competing termination pathways suggests that the cyclic species determined via MALDI-TOF MS experiments consists of a zwitterionic species deriving from nucleophilic attack of the N atom of the carbamate chain-end to the C═O group bound to the NHC moiety.

Organocatalysis: Fundamentals and Comparisons to Metal and Enzyme Catalysis

Directory of Open Access Journals (Sweden)

Pierre Vogel

2016-08-01

Full Text Available Catalysis fulfills the promise that high-yielding chemical transformations will require little energy and produce no toxic waste. This message is carried by the study of the evolution of molecular catalysis of some of the most important reactions in organic chemistry. After reviewing the conceptual underpinnings of catalysis, we discuss the applications of different catalysts according to the mechanism of the reactions that they catalyze, including acyl group transfers, nucleophilic additions and substitutions, and C–C bond forming reactions that employ umpolung by nucleophilic additions to C=O and C=C double bonds. We highlight the utility of a broad range of organocatalysts other than compounds based on proline, the cinchona alkaloids and binaphthyls, which have been abundantly reviewed elsewhere. The focus is on organocatalysts, although a few examples employing metal complexes and enzymes are also included due to their significance. Classical Brønsted acids have evolved into electrophilic hands, the fingers of which are hydrogen donors (like enzymes or other electrophilic moieties. Classical Lewis base catalysts have evolved into tridimensional, chiral nucleophiles that are N- (e.g., tertiary amines, P- (e.g., tertiary phosphines and C-nucleophiles (e.g., N-heterocyclic carbenes. Many efficient organocatalysts bear electrophilic and nucleophilic moieties that interact simultaneously or not with both the electrophilic and nucleophilic reactants. A detailed understanding of the reaction mechanisms permits the design of better catalysts. Their construction represents a molecular science in itself, suggesting that sooner or later chemists will not only imitate Nature but be able to catalyze a much wider range of reactions with high chemo-, regio-, stereo- and enantioselectivity. Man-made organocatalysts are much smaller, cheaper and more stable than enzymes.

Dynamics of the NbCl5-catalyzed cycloaddition of propylene oxide and CO2: Assessing the dual role of the nucleophilic co-catalysts

KAUST Repository

D'Elia, Valerio

2014-07-23

A mechanistic study on the synthesis of propylene carbonate (PC) from CO2 and propylene oxide (PO) catalyzed by NbCl5 and organic nucleophiles such as 4-dimethylaminopyridine (DMAP) or tetra-n-butylammonium bromide (NBu4Br) is reported. A combination of in situ spectroscopic techniques and kinetic studies has been used to provide detailed insight into the reaction mechanism, the formation of intermediates, and interactions between the reaction partners. The results of DFT calculations support the experimental observations and allow us to propose a mechanism for this reaction. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Substitution in recreation choice behavior

Science.gov (United States)

George L. Peterson; Daniel J. Stynes; Donald H. Rosenthal; John F. Dwyer

1985-01-01

This review discusses concepts and theories of substitution in recreation choice. It brings together the literature of recreation research, psychology, geography, economics, and transportation. Parallel and complementary developments need integration into an improved theory of substitution. Recreation decision behavior is characterized as a nested or sequential choice...

Why Does Trigonometric Substitution Work?

Science.gov (United States)

Cunningham, Daniel W.

2018-01-01

Modern calculus textbooks carefully illustrate how to perform integration by trigonometric substitution. Unfortunately, most of these books do not adequately justify this powerful technique of integration. In this article, we present an accessible proof that establishes the validity of integration by trigonometric substitution. The proof offers…

Enhanced magnetoresistance and Griffiths phase induced by Mo substitution in La0.7Ca0.15Sr0.15Mn1-xMoxO3 (0 ≤ x ≤ 0.05)

International Nuclear Information System (INIS)

Narsinga Rao, G; Chen, J W; Neeleshwar, S; Chen, Y Y; Wu, M K

2009-01-01

Structural, magnetic and electrical properties of the La 0.7 Ca 0.15 Sr 0.15 Mn 1-x Mo x O 3 (0 ≤ x ≤ 0.05) compounds have been investigated. Powder x-ray analysis reveals that the sample with x = 0 crystallizes in the rhombohedral (R 3-bar c) structure, whereas in the Mo doped samples the structure can be indexed by an orthorhombic (Pbnm) structure. The important observations of the magnetic and transport properties are: (i) the Mo substitution induces a distinct suppression of the metal-insulator (T MI ) and ferromagnetic (FM)-paramagnetic transition (T C ) and the temperature of T MI was found to be higher than T C in the Mo-doped samples, (ii) the substitution of Mo enhances the magnetoresistance at room temperature, (iii) a large deviation from the Curie-Weiss law well above T C in the Mo substituted samples indicates the existence of a Griffiths phase and (iv) long-range FM order persists in all samples with a linear decrease of saturation moment as x increases. These results are discussed in terms of the Mn-site disorder and opening of strong FM coupling between Mn 2+ -O-Mn 3+ , due to the Mn 2+ ions induced by Mo 6+ at the expense of Mn 4+ ions in the La 0.7 Ca 0.15 Sr 0.15 Mn 1-x Mo x O 3 system.

Substituted Indoleacetic Acids Tested in Tissue Cultures

DEFF Research Database (Denmark)

Engvild, Kjeld Christensen

1978-01-01

Monochloro substituted IAA inhibited shoot induction in tobacco tissue cultures about as much as IAA. Dichloro substituted IAA inhibited shoot formation less. Other substituted IAA except 5-fluoro- and 5-bromoindole-3-acetic acid were less active than IAA. Callus growth was quite variable...

Correlated electron state in CeCu2Si2 controlled through Si to P substitution

Science.gov (United States)

Lai, Y.; Saunders, S. M.; Graf, D.; Gallagher, A.; Chen, K.-W.; Kametani, F.; Besara, T.; Siegrist, T.; Shekhter, A.; Baumbach, R. E.

2017-08-01

CeCu2Si2 is an exemplary correlated electron metal that features two domes of unconventional superconductivity in its temperature-pressure phase diagram. The first dome surrounds an antiferromagnetic quantum critical point, whereas the more exotic second dome may span the termination point of a line of f -electron valence transitions. This behavior has received intense interest, but what has been missing are ways to access the high pressure behavior under milder conditions. Here we study Si → P chemical substitution, which compresses the unit cell volume but simultaneously weakens the hybridization between the f - and conduction electron states and encourages complex magnetism. At concentrations that show magnetism, applied pressure suppresses the magnetic ordering temperature and superconductivity is recovered for samples with low disorder. These results reveal that the electronic behavior in this system is controlled by a nontrivial combination of effects from unit cell volume and electronic shell filling. Guided by this topography, we discuss prospects for uncovering a valence fluctuation quantum phase transition in the broader family of Ce-based ThCr2Si2 -type materials through chemical substitution.

The effect of cobalt substitution on magnetic hardening of magnetite

Energy Technology Data Exchange (ETDEWEB)

Mozaffari, M., E-mail: mozafari@sci.ui.ac.ir [Department of Physics, Faculty of Science, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Hadadian, Y. [Physics Department, Razi University, Taghebostan, Kermanshah (Iran, Islamic Republic of); Aftabi, A. [Department of Physics, University of Kurdistan, Sanandaj 66177-15175 (Iran, Islamic Republic of); Oveisy Moakhar, M. [Physics Department, Razi University, Taghebostan, Kermanshah (Iran, Islamic Republic of)

2014-03-15

In this work cobalt-substituted magnetite (Co{sub x}Fe{sub 1−x}Fe{sub 2}O{sub 4}, x=0, 0.25, 0.50 and 0.75) nanoparticles were synthesized by coprecipitation method and their structural and magnetic properties were investigated. X-ray diffraction was carried out and the results show that all of the samples have single phase spinel structure. Microstructure of the samples was studied using a field emission scanning electron microscope and the results show that particle sizes of the prepared nanoparticles were uniform and in the 50–55 nm range. Room temperature magnetic properties of the nanoparticles were measured by an alternating gradient force magnetometer and the results revealed that substituting cobalt for iron in magnetite structure, changes the magnetite from a soft magnetic material to a hard one. So that coercivity changes from 0 (a superparamagnetic state) to 337 Oe (a hard magnetic material), which is a remarkable change. Curie temperatures of the samples were determined by recording their susceptibility-temperature (χ–T) curves and the results show that by increasing cobalt content, Curie temperature of the samples also increases. Also χ–T curves of the samples were recorded from above Curie temperature to room temperature (first cooling), while the curves in the second heating and second cooling have the same behaviour as the first cooling curve. The results depict that all samples have different behaviour in the first cooling and in the first heating processes. This shows remarkable changes of the cation distribution in the course of first heating. - Highlights: • It is possible to get Co substituted magnetite nanoparticles by coprecipitation method. • Prepared nanoparticles have different cation distribution in comparison with that of bulk counterparts. • Co substitution increases coercivity of the magnetite.

Currency Substitution and Inflation in Peru Currency Substitution and Inflation in Peru

OpenAIRE

Liliana Rojas-Suarez

1992-01-01

This paper shows that there is a long-run relationship between the expected rate of depreciation in the black-market-exchange rate and the ratio of domestic to foreign money in Peru: that is, the hypothesis of currency substitution can explain the behavior of real holdings of money in Peru. The paper also shows that, while, the importance of currency substitution as a transmission mechanism through which domestic policies affected the dynamics of inflation was relatively small during a period...

Synthesis of substituted Calix[6] arene and 18F labeling reaction as catalyst in preparation of 18F-FET

International Nuclear Information System (INIS)

Peng Cheng; Ma Yunchuan; Chen Xiaoxiao; Li Guixia; Li Shilei; Zhang Shuting; He Yong; Qi Chuanmin

2011-01-01

The phase transfer catalyst Substituted Calix[6] arene was prepared and it was used as catalyst to prepare the tumor diagnostic drug 18 F-FET. The results showed that para-sulfonated-calix[6] arene not only catalyzes 19 F substitution reaction, but also catalyzes 18 F labelling reaction with radiochemical yield of 11%. However, para-tert-butyl-calix[6] arene has no catalytic activity for the 19 F substitution reaction nor the 18 F labelling reaction of the precursor of FET. The catalyzing of para-sulfonated-calix[6]arene may be related to it's sulfonate groups, which participated in the coordination reaction and increased the polarity of calyx[6] arene and so on. Although radiochemical yield of the para-sulfonated-calix[6] arene catalyzed 18 F labeling of the precursor of FET was much lower than that obtained by Kryptofix 2. 2. 2, this study still has significant meaning for us to find better substituted Calix[6] arene catalysts by optimizing the reaction conditions. (authors)

The Morishima Gross elasticity of substitution

OpenAIRE

Blackorby, Charles; Primont, Daniel; Russell, R. Robert

2007-01-01

We show that the Hotelling-Lau elasticity of substitution, an extension of the Allen-Uzawa elasticity to allow for optimal output-quantity (or utility) responses to changes in factor prices, inherits all of the failings of the Allen-Uzawa elasticity identified by Blackorby and Russell [1989 AER]. An analogous extension of the Morishima elasticity of substitution to allow for output quantity changes preserves the salient properties of the original Hicksian notion of elasticity of substitution.

Structural, electrical, magnetic and dielectric properties of rare-earth substituted cobalt ferrites nanoparticles synthesized by the co-precipitation method

Energy Technology Data Exchange (ETDEWEB)

Nikumbh, A.K., E-mail: aknik@chem.unipune.ac.in; Pawar, R.A.; Nighot, D.V.; Gugale, G.S.; Sangale, M.D.; Khanvilkar, M.B.; Nagawade, A.V.

2014-04-15

Pure nanoparticles of the rare-earth substituted cobalt ferrites CoRE{sub x}Fe{sub 2−x}O{sub 4} (where RE=Nd, Sm and Gd and x=0.1 and 0.2) were prepared by the chemical co-precipitation method. X-ray diffraction, Transmission electron microscopy (TEM), d.c. electrical conductivity, Magnetic hysteresis and Thermal analysis are utilized in order to study the effect of variation in the rare-earth substitution and its impact on particle size, magnetic properties like M{sub S}, H{sub C} and Curie temperature. The phase identification of the materials by X-ray diffraction reveals the single-phase nature of the materials. The lattice parameter increased with rare-earth content for x≤0.2. The Transmission electron micrographs of Nd-, Sm- and Gd-substituted CoFe{sub 2}O{sub 4} exhibit the particle size 36.1 to 67.8 nm ranges. The data of temperature variation of the direct current electrical conductivity showed definite breaks, which corresponds to ferrimagnetic to paramagnetic transitions. The thermoelectric power for all compound are positive over the whole range of temperature. The dielectric constant decreases with frequency and rare-earth content for the prepared samples. The magnetic properties of rare-earth substituted cobalt ferrites showed a definite hysteresis loop at room temperature. The reduction of coercive force, saturation magnetization, ratio M{sub R}/M{sub S} and magnetic moments may be due to dilution of the magnetic interaction.

Substitution of matrices over rings

NARCIS (Netherlands)

Hautus, M.L.J.

1995-01-01

For a given commutative ring with an identity element, we define and study the substitution of a matrix with entries in into a matrix polynomial or rational function over . A Bezout-type remainder theorem and a "partial-substitution rule" are derived and used to obtain a number of results. The

Characterization and Antimicrobial Studies of Five Substituted Bis-Thioureas

International Nuclear Information System (INIS)

Nurulain Kamalulazmy; Sahilah Abd Mutalib; Fatin Ilyani Nasir; Nurul Izzaty Hassan

2016-01-01

Thioureas play an important role in medicinal chemistry and agricultures due to their biological activity such as antibacterial, antifungal, antiviral, herbicides, rodenticides, phenoloxidase enzymatic inhibitors, anti-HIV and anti-tumor agents. In this study, five substituted bis-thioureas have been synthesized. The isophthaloyl chloride and 2,6- pyridine dicarbonyl dichloride were easily converted to bis-isothiocyanate compound via the reaction with ammonium thiocyanate by solid-liquid phase transfer catalysis of polyethylene glycol-400 (PEG-400). Bis-isothiocyanate compound was reacted with aniline derivatives to produce substituted bis-thioureas in good yield at room temperature. All the novel compounds were obtained as yellow solid after recrystallization using DMF/EtOH/H_2O. Their chemical structures were confirmed by Infrared spectroscopy (IR), Nuclear Magnetic Resonance (NMR) "1H and "1"3C and mass spectrometry. The five synthesized compounds were screened for antimicrobial activities using disc diffusion method for antimicrobial activity against Gram-positive bacteria (Bacillus Subtilis and Staphylococcus Aureus), Gram-negative bacteria (Escherichia Coli and Salmonella Typhi) and a mold (Aspergillus Niger). All tested compounds showed low antimicrobial activity since the diameter of inhibition zone (IZ) measure was less than positive control inhibition zone. (author)

Preferential site occupancy of alloying elements in TiAl-based phases

Energy Technology Data Exchange (ETDEWEB)

Holec, David, E-mail: david.holec@unileoben.ac.at; Reddy, Rajeev K.; Klein, Thomas; Clemens, Helmut [Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, Franz-Josef-Strasse 18, A-8700 Leoben (Austria)

2016-05-28

First principles calculations are used to study the preferential occupation of ternary alloying additions into the binary Ti-Al phases, namely, γ-TiAl, α{sub 2}-Ti{sub 3}Al, β{sub o}-TiAl, and B19-TiAl. While the early transition metals (TMs, group IVB, VB, and VIB elements) prefer to substitute for Ti atoms in the γ-, α{sub 2}-, and B19-phases, they preferentially occupy Al sites in the β{sub o}-TiAl. Si is, in this context, an anomaly, as it prefers to sit on the Al sublattice for all four phases. B and C are shown to prefer octahedral Ti-rich interstitial positions instead of substitutional incorporation. The site preference energy is linked with the alloying-induced changes of energy of formation, hence alloying-related (de)stabilisation of the phases. We further show that the phase-stabilisation effect of early TMs on β{sub o}-phase has a different origin depending on their valency. Finally, an extensive comparison of our predictions with available theoretical and experimental data (which is, however, limited mostly to the γ-phase) shows a consistent picture.

Substituting missing data in compositional analysis

Energy Technology Data Exchange (ETDEWEB)

Real, Carlos, E-mail: carlos.real@usc.es [Area de Ecologia, Departamento de Biologia Celular y Ecologia, Escuela Politecnica Superior, Universidad de Santiago de Compostela, 27002 Lugo (Spain); Angel Fernandez, J.; Aboal, Jesus R.; Carballeira, Alejo [Area de Ecologia, Departamento de Biologia Celular y Ecologia, Facultad de Biologia, Universidad de Santiago de Compostela, 15782 Santiago de Compostela (Spain)

2011-10-15

Multivariate analysis of environmental data sets requires the absence of missing values or their substitution by small values. However, if the data is transformed logarithmically prior to the analysis, this solution cannot be applied because the logarithm of a small value might become an outlier. Several methods for substituting the missing values can be found in the literature although none of them guarantees that no distortion of the structure of the data set is produced. We propose a method for the assessment of these distortions which can be used for deciding whether to retain or not the samples or variables containing missing values and for the investigation of the performance of different substitution techniques. The method analyzes the structure of the distances among samples using Mantel tests. We present an application of the method to PCDD/F data measured in samples of terrestrial moss as part of a biomonitoring study. - Highlights: > Missing values in multivariate data sets must be substituted prior to analysis. > The substituted values can modify the structure of the data set. > We developed a method to estimate the magnitude of the alterations. > The method is simple and based on the Mantel test. > The method allowed the identification of problematic variables in a sample data set. - A method is presented for the assessment of the possible distortions in multivariate analysis caused by the substitution of missing values.

Thermodynamic Modelling of Phase Transformation in a Multi-Component System

Science.gov (United States)

Vala, J.

2007-09-01

Diffusion in multi-component alloys can be characterized by the vacancy mechanism for substitutional components, by the existence of sources and sinks for vacancies and by the motion of atoms of interstitial components. The description of diffusive and massive phase transformation of a multi-component system is based on the thermodynamic extremal principle by Onsager; the finite thickness of the interface between both phases is respected. The resulting system of partial differential equations of evolution with integral terms for unknown mole fractions (and additional variables in case of non-ideal sources and sinks for vacancies), can be analyzed using the method of lines and the finite difference technique (or, alternatively, the finite element one) together with the semi-analytic and numerical integration formulae and with certain iteration procedure, making use of the spectral properties of linear operators. The original software code for the numerical evaluation of solutions of such systems, written in MATLAB, offers a chance to simulate various real processes of diffusional phase transformation. Some results for the (nearly) steady-state real processes in substitutional alloys have been published yet. The aim of this paper is to demonstrate that the same approach can handle both substitutional and interstitial components even in case of a general system of evolution.

Determinants of generic drug substitution in Switzerland

Directory of Open Access Journals (Sweden)

Lufkin Thomas M

2011-01-01

Full Text Available Abstract Background Since generic drugs have the same therapeutic effect as the original formulation but at generally lower costs, their use should be more heavily promoted. However, a considerable number of barriers to their wider use have been observed in many countries. The present study examines the influence of patients, physicians and certain characteristics of the generics' market on generic substitution in Switzerland. Methods We used reimbursement claims' data submitted to a large health insurer by insured individuals living in one of Switzerland's three linguistic regions during 2003. All dispensed drugs studied here were substitutable. The outcome (use of a generic or not was modelled by logistic regression, adjusted for patients' characteristics (gender, age, treatment complexity, substitution groups and with several variables describing reimbursement incentives (deductible, co-payments and the generics' market (prices, packaging, co-branded original, number of available generics, etc.. Results The overall generics' substitution rate for 173,212 dispensed prescriptions was 31%, though this varied considerably across cantons. Poor health status (older patients, complex treatments was associated with lower generic use. Higher rates were associated with higher out-of-pocket costs, greater price differences between the original and the generic, and with the number of generics on the market, while reformulation and repackaging were associated with lower rates. The substitution rate was 13% lower among hospital physicians. The adoption of the prescribing practices of the canton with the highest substitution rate would increase substitution in other cantons to as much as 26%. Conclusions Patient health status explained a part of the reluctance to substitute an original formulation by a generic. Economic incentives were efficient, but with a moderate global effect. The huge interregional differences indicated that prescribing behaviours and

Fabrication, characterization, and in vitro study of zinc substituted hydroxyapatite/silk fibroin composite coatings on titanium for biomedical applications.

Science.gov (United States)

Zhong, Zhenyu; Ma, Jun

2017-09-01

Zinc substituted hydroxyapatite/silk fibroin composite coatings were deposited on titanium substrates at room temperature by electrophoretic deposition. Microscopic characterization of the synthesized composite nanoparticles revealed that the particle size ranged 50-200 nm, which increased a little after zinc substitution. The obtained coatings maintained the phase of hydroxyapatite and they could induce fast apatite formation in simulated body fluid, indicating high bone activity. The cell culturing results showed that the biomimetic hydroxyapatite coatings could regulate adhesion, spreading, and proliferation of osteoblastic cells. Furthermore, the biological behavior of the zinc substituted hydroxyapatite coatings was found to be better than the bare titanium without coatings and hydroxyapatite coatings without zinc, increasing MC3T1-E1 cell differentiation in alkaline phosphatase expression.

Synthesis of 11C-labelled haloalkanonitriles and examples of their use in some alkylation reactions

International Nuclear Information System (INIS)

Hoernfeldt, K.; Antoni, G.; Laangstroem, B.

1992-01-01

The synthesis of the 11 C-labelled bifunctional precursors 4-iodobutyro[ 11 C]nitrile (1), 4-tosyloxybutyro[ 11 C]nitrile (2), 5-iodovalero[ 11 C]nitrile (3), 5-toxyloxyvalero[ 11 C]nitrile (4) and 4-bromopentano[ 11 C]nitrile (5) are presented. The nucleophilic substitution reactions of [ 11 C]cyanide with dibromides, diiodides, ditosylates or mixed iodotosylates producing 1-5 have been carried out in different solvents and the labelled products were obtained in 62-98% radiochemical yields (not isolated), with a total synthesis time of 5 min counted from the end of the hydrogen [ 11 C]cyanide synthesis. The labelled haloalkanonitriles 1 and 3 have also been used in some alkylation reactions with various carbon and oxygen nucleophiles. (au)

Substitution within the Danish printing industry

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Bøg, Carsten

2009-01-01

are running a substitution project. A major part of the work has been mapping the presence of chemicals which are potential candidates for substitution (e.g. PBT, CMR, vPvB, EDS) within the Danish printing industry and this work was recently finished. The mapping comprises a combination of a literature study......The implementation of the EU REACH regulation will most probably promote substitution within sectors handling a lot of different chemicals like the printing industry. With the aim of being at the cutting edge of this development the Danish EPA together with the Danish printing industry and IPU...... total 15 substances) were found in the Danish printing industry. This paper presents the results of the mapping of chemical candidates and the first results on preparing for actual substitutions....

Technological substitution options for controlling greenhouse gas emissions

International Nuclear Information System (INIS)

Barbier, E.B.; Burgess, J.C.; Pearce, D.W.

1991-01-01

This chapter is concerned with technological options for greenhouse gas substitution. The authors interpret the term substitution to exclude energy conservation/efficiency measures, investments in afforestation (sinks), and greenhouse gas removal or abatement technologies. Their working definition of greenhouse gas substitution includes (1) replacement technologies, for example, substituting a greenhouse gas technology with a nongreenhouse gas technology; and (2) reduction technologies, for example, substituting a greenhouse gas technology with an alternative technology that reduces greenhouse gas emissions. Essentially, replacement technologies involve 100 percent reduction in CO 2 ; reduction technologies involve a partial reduction in CO 2 . Of the man-made sources of greenhouse gases, energy is the most important and is expected to contribute to at least half of the global warming effect in the near future. The majority of this impact is from fossil fuel combustion as a source of carbon dioxide (CO 2 ), although fossil fuels also contribute significantly to methane (CH 4 ), to nitrous oxide (N 2 O), and to low-level ozone (O 3 ) through production of various nitrogen gases (NO x ) and carbon monoxide (CO). This study analyzes the available greenhouse gas substitutions and their costs. The authors concentrate particularly on substitutions for fossil-fuel combustion and CFC production and consumption. They conclude by summarizing the potential for greenhouse gas substitution, the cost-effectiveness of the various options and the design of incentives for substitution

Synthesis, characterization and investigation of the spectroscopic properties of novel peripherally 2,3,5-trimethylphenoxy substituted Cu and Co phthalocyanines, the computational and experimental studies of the 4-(2,3,5-trimethylphenoxyphthalonitrile

Directory of Open Access Journals (Sweden)

Nesuhi Akdemir

2016-11-01

Full Text Available 4-(2,3,5-trimethylphenoxyphthalonitrile (3 was firstly prepared via aromatic nucleophilic substitution reaction and characterized by FT-IR, mass spectrometry, 1H and 13C NMR techniques. The molecular structure of the compound (3 was optimized using Density Functional Theory (DFT/B3LYP method with 6-311G(d,p basis set in the ground state. The molecular geometric parameters which were obtained by X-ray single crystal diffraction method and the spectral results were compared with computed bond lengths and angles, vibrational frequencies and 1H, 13C NMR chemical shifts values of the compound (3. Also, Cu(II and Co(II phthalocyanines were synthesized by the treatment of dinitrile derivative with anhydrous CuCl2 or CoCl2 under N2 atmosphere in dry n-pentanol at 140oC. The new compounds have been determined by elemental analysis, FT-IR and electronic absorption. The UV-Vis spectra of the Cu(II and Co(II phthalocyanines were recorded with different concentration in THF and also with different solvents as DMF, DMSO, DCM, CHCl3, toluene.

Noval 1-substituted-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazole derivatives: Synthesis and pharmacological activity

Directory of Open Access Journals (Sweden)

Sabir Hussain

2015-05-01

Full Text Available Several-1-carbothioamide-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 2a–d, 1-(pyridine-4-ylcarbonyl-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 3a–d, 1-(5-chloro-6-fluoro-1,3-benzothiazole-2-ylthiocarbamoyl-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 4a–d and 1-[(1,2,4-triazole-4-yl carbothioamide]-3,5-dimethyl-4-[(substituted phenyl diazenyl] pyrazoles 5a–d were synthesized. The structures of the newly synthesized compounds were supported by IR, 1H NMR and mass spectral data. These compounds were investigated for their, anti-inflammatory, analgesic, ulcerogenic, lipid peroxidation, antibacterial and antifungal activities. Some of the synthesized compounds showed potent anti-inflammatory activity along with minimal ulcerogenic effect and lipid peroxidation, compared to ibuprofen and flurbiprofen. Some of the tested compounds also showed moderate antimicrobial activity against tested bacterial and fungal strains.

Structural, morphological and electrical properties of Sn-substituted Ni-Zn ferrites synthesized by double sintering technique

Energy Technology Data Exchange (ETDEWEB)

Ali, M.A. [Department of Physics, Chittagong University of Engineering and Technology (CUET), Chittagong 4349 (Bangladesh); Uddin, M.M., E-mail: mohi@cuet.ac.bd [Department of Physics, Chittagong University of Engineering and Technology (CUET), Chittagong 4349 (Bangladesh); Khan, M.N.I. [Materials Science Division, Atomic Energy Center, Dhaka 1000 (Bangladesh); Chowdhury, F.U.-Z. [Department of Physics, Chittagong University of Engineering and Technology (CUET), Chittagong 4349 (Bangladesh); Haque, S.M. [Materials Science Division, Atomic Energy Center, Dhaka 1000 (Bangladesh)

2017-02-15

The Sn-substituted Ni-Zn ferrites, (0.0≤x≤0.30), have been synthesized by the standard double sintering technique from the oxide nanopowders of Ni, Zn, Fe and Sn. The structural and electrical properties have been investigated by the X-ray diffraction (XRD), scanning electron microscopy (SEM), DC resistivity and dielectric measurements. From XRD data, the single cubic spinel phase has been confirmed for x≤0.1, whereas for x>0.1 an extra intermediate phase has been detected along with the cubic spinel phase of Ni-Zn ferrite. The grain size is increased due to Sn substitution in Ni-Zn ferrites. DC resistivity as a function of temperature has been measured by two probe method. The semiconducting nature has been found operative in the samples. The DC resistivity was found to decrease whilst the dielectric constant increased with increasing Sn content in Ni-Zn ferrites. The unusual behavior of the dielectric loss factor of the ferrites was explained by the Rezlescu model. The electrical relaxation of the ferrites has been studied in terms of electric modulus formalism and the time for dielectric relaxation was calculated. The contribution of grain resistance has been studied from the Cole-Cole plot. The suitability to use the as prepared samples in the miniaturized memory devices based capacitive components or energy storage principles are confirmed from the values of dielectric constant. - Highlights: • Sn-substituted Ni-Zn ferrites with cubic spinel structure have been synthesized. • a{sub th} is calculated and well compared with a{sub expt}. • Dielectric unusual behavior has been successfully explained by the Rezlescu model. • Long τ (ns) is determined, can be utilized for memory and spintronics devices.

Effect of W substitution for Mo on stress corrosion cracking behavior of 25Cr-7Ni duplex stainless steel

International Nuclear Information System (INIS)

Ha, Tae Hong; Kim, Kyoo Young

1998-01-01

The effect of W substitution for Mo in duplex stainless steel (DSS) was investigated with respect to microstructure and stress corrosion cracking behavior. Homogenizing treatment was performed at 1100.deg.C for 10 minutes, while aging treatment was performed at 900.deg.C with different holding times. In homogenized condition, regardless of W substitution, all the specimens had the nearly equal volume-ratio of ferrite and austenite, and had no secondary phase precipitation. On aging, the W modification on suppression of secondary phase precipitation was very effective. Total amount of secondary phase precipitates was greatly reduced in the W-modified DSS in the early stage of the ageing treatment comparing to the commercial grade DSS without W modification. However, this effect was reduced rapidly as the aging time increased. Stress corrosion cracking(SCC) was examined in boil-ing 42% MgCl 2 solution by slow strain rate test(SSRT) and constant load test (CLT). Under the homogenized condition, the beneficial effect of W was clearly observed at the low applied stress levels where the electrochemical action plays a dominant role. In the commercial grade DSS without W modification, the crack propagated in a trans-phase mode,whereas in the W-modified DSS, the crack propagated in a mixed mode of trans-phase and inter-phase due to barrier effect of austenite phase against crack growth. Under the aged condition, the signification improvement in SCC resistance of the aged DSS specimens with W modification resulted from increase in toughness due to a relatively small amount of the brittle secondary phase precipitates. However, the cracks propagated in a trans-phase mode in the DSS specimens regardless of W modification

Acid-base equilibrium. A thermodynamic study of formation and stability of the Bi-2223 phase

International Nuclear Information System (INIS)

Xi, Z.; Zhou, L.

1993-01-01

A general acid-base equilibrium theory was proposed to explain the formation and stability of the Bi-2223 phase based on the Lewis acid base theory and principle of metallurgical physical chemistry. The acid-base nature of oxide was defined according to the electrostatic force between cation and oxygen anion. A series of experimental facts were systematically explained based on the theory: substitution of Bi for Ca in the Pb-free 2223 phase, and the effect of substitution of the high-valent cation for Bi 3+ ; oxygen-pressure atmosphere, and the heat-schocking technique on the formation and stability of the 2223 phase. 14 refs., 2 tabs

Experimental thermochemical study of the three methyl substituted 2-acetylthiophene isomers

International Nuclear Information System (INIS)

Ribeiro da Silva, Manuel A.V.; Santos, Ana Filipa L.O.M.

2008-01-01

A rotating-bomb combustion calorimeter was used to determine the standard (p 0 = 0.1 MPa) molar enthalpies of combustion, Δ c H m 0 , of the liquids 2-acetyl-3-methylthiophene, 2-acetyl-4-methylthiophene, and 2-acetyl-5-methylthiophene, from which the standard molar enthalpies of formation, Δ f H m 0 , in the liquid phase, at the temperature of 298.15 K, were derived. The standard molar enthalpies of vaporization, Δ l g H m 0 , at T = 298.15 K, for those compounds, were obtained by high temperature Calvet microcalorimetry. From the experimental results, the standard molar enthalpies of formation of the three methyl substituted 2-acetylthiophene isomers, in the gaseous phase, were calculated and a comparison between the relative stability and the energetic of the three isomers was carried out

Chemical bonding and magnetic properties of gadolinium (Gd) substituted cobalt ferrite

Energy Technology Data Exchange (ETDEWEB)

Puli, Venkata Sreenivas, E-mail: vspuli@utep.edu [Department of Mechanical Engineering, University of Texas, El Paso, TX 79968 (United States); Adireddy, Shiva [Department of Physics and Engineering Physics, Tulane University, New Orleans, LA 70118 (United States); Ramana, C.V. [Department of Mechanical Engineering, University of Texas, El Paso, TX 79968 (United States)

2015-09-25

Graphical abstract: Room temperature Raman spectra of CoFe{sub 2−x}Gd{sub x}O{sub 4} (CFGO, x = 0.0–0.3) compounds as a function of wavenumber (cm{sup −1}). - Highlights: • Gd substituted ferrites were synthesized under controlled concentration. • Gd ion induced lattice dynamical changes are significant. • Enhanced magnetization is observed upon Gd-incorporation in cobalt ferrite. • A correlation between lattice dynamics and magnetic properties is established. - Abstract: Polycrystalline gadolinium (Gd) substituted cobalt ferrites (CoFe{sub 2−x}Gd{sub x}O{sub 4}; x = 0–0.3, referred to CFGO) ceramics have been synthesized by solid state reaction method. Chemical bonding, crystal structure and magnetic properties of CFGO compounds have been evaluated as a function of Gd-content. X-ray diffraction (XRD) and Raman spectroscopic analyses confirmed the formation of inverse spinel cubic structure. However, a secondary ortho-ferrite phase (GdFeO{sub 3}) nucleates for higher values of Gd-content. A considerable increase in the saturation magnetization has been observed upon the initial substitution of Gd (x = 0.1). The saturation magnetization drastically decreases at higher Gd content (x ⩾ 0.3). No contribution from ortho-ferrite GdFeO{sub 3} phase is noted to the magnetic properties. The increase in the magnetic saturation magnetization is attributed to the higher magnetic moment of Gd{sup 3+} (4f{sup 7}) residing in octahedral sites is higher when compared to that of Fe{sup 3+} (3d{sup 5}) and as well due to the migration of Co{sup 2+} (3d{sup 7}) ions from the octahedral to the tetrahedral sites with a magnetic moment aligned anti-parallel to those of rare earth (RE{sup 3+}) ions in the spinel lattice. Increase in coercivity with increase in Gd{sup 3+} is content is attributed to magnetic anisotropy in the ceramics.

Sequence-Controlled Polymerization on Facially Amphiphilic Templates at Interfaces

Science.gov (United States)

2016-06-14

We selected Stille coupling due to the excellent functional group tolerance, which enables complex multistep synthesis. Following the iterative...available cyclooctadiene (COD) was brominated and purified by distillation, followed by nucleophilic substitution with cyanide anion, and finally...chemical design principles. While it can be difficult to view the complexity of the proposed structures as 2D drawings: the 3D energy minimized

4,4’-Bis(4-octylphenoxy-2,2’-bipyridine

Directory of Open Access Journals (Sweden)

Zhen-Ting Du

2009-12-01

Full Text Available 4,4’-Bis(4-octylphenoxy-2,2’-bipyridine which can be used in complexes of ruthenium was synthesized. This ligand bears a long chain for the purpose of increasing the solubility of the final complex. The synthesis was achieved through a nucleophilic aromatic substitution reaction of 4,4’-bromo-2,2’-bipyridine and 4-octylphenol.

Pharmacy on Demand Feasibility Assessment

Science.gov (United States)

2008-07-19

quinolone structure. The synthesis is completed with a nucleophilic aromatic substitution with piperazine, followed by saponification and acidification...methyl ether in the presence of ester functionalities using boron tribromide at low temperature. The second route involves saponification of the...methyl ester, followed by esterification with tropine (Scheme 5B). Finally, the route described in Scheme 5C involves saponification , followed by

[Delegation yes, substitution no!].

Science.gov (United States)

Schroeder, A

2014-08-01

The aging of society leads on the one hand to increasing case numbers and on the other hand to a reduction in the number of physicians available for patient treatment. The delegation and substitution of medical duties as a tried and tested method is increasingly being recommended in order to compensate for the lack of physicians. The Berufsverband der Deutschen Urologen (BDU, Professional Association of German Urologists) supports the guiding principle of the Bundesärztekammer (Federal Medical Council) of "delegation yes, substitution no" and rejects a substitution of medical duties by non-medical academic health personnel. Against the background of the demographic changes, the increasing need for treatment and the current deficiency of junior physicians, a more extensive inclusion of well-qualified and experienced non-medical personnel by the delegation of medically responsible duties (medical scope of practice) can be an appropriate measure to maintain a good medical service in practices, hospitals and nursing homes.

Stabilization of Angiotensin-(1-7) by key substitution with a cyclic non-natural amino acid.

Science.gov (United States)

Wester, Anita; Devocelle, Marc; Tallant, E Ann; Chappell, Mark C; Gallagher, Patricia E; Paradisi, Francesca

2017-10-01

Angiotensin-(1-7) [Ang-(1-7)], a heptapeptide hormone of the renin-angiotensin-aldosterone system, is a promising candidate as a treatment for cancer that reflects its anti-proliferative and anti-angiogenic properties. However, the peptide's therapeutic potential is limited by the short half-life and low bioavailability resulting from rapid enzymatic metabolism by peptidases including angiotensin-converting enzyme (ACE) and dipeptidyl peptidase 3 (DPP 3). We report the facile assembly of three novel Ang-(1-7) analogues by solid-phase peptide synthesis which incorporates the cyclic non-natural δ-amino acid ACCA. The analogues containing the ACCA substitution at the site of ACE cleavage exhibit complete resistance to human ACE, while substitution at the DDP 3 cleavage site provided stability against DPP 3 hydrolysis. Furthermore, the analogues retain the anti-proliferative properties of Ang-(1-7) against the 4T1 and HT-1080 cancer cell lines. These results suggest that ACCA-substituted Ang-(1-7) analogues which show resistance against proteolytic degradation by peptidases known to hydrolyze the native heptapeptide may be novel therapeutics in the treatment of cancer.

Substituting missing data in compositional analysis

International Nuclear Information System (INIS)

Real, Carlos; Angel Fernandez, J.; Aboal, Jesus R.; Carballeira, Alejo

2011-01-01

Multivariate analysis of environmental data sets requires the absence of missing values or their substitution by small values. However, if the data is transformed logarithmically prior to the analysis, this solution cannot be applied because the logarithm of a small value might become an outlier. Several methods for substituting the missing values can be found in the literature although none of them guarantees that no distortion of the structure of the data set is produced. We propose a method for the assessment of these distortions which can be used for deciding whether to retain or not the samples or variables containing missing values and for the investigation of the performance of different substitution techniques. The method analyzes the structure of the distances among samples using Mantel tests. We present an application of the method to PCDD/F data measured in samples of terrestrial moss as part of a biomonitoring study. - Highlights: → Missing values in multivariate data sets must be substituted prior to analysis. → The substituted values can modify the structure of the data set. → We developed a method to estimate the magnitude of the alterations. → The method is simple and based on the Mantel test. → The method allowed the identification of problematic variables in a sample data set. - A method is presented for the assessment of the possible distortions in multivariate analysis caused by the substitution of missing values.

Theoretical study of the nucleophilic addition of oximes to the nitrile complexes trans-/cis-[ReCl4(NCCH3)2

International Nuclear Information System (INIS)

Klestova-Nadeeva, E. A.; Kuznetsov, M. L.; Dement'ev, A. I.

2005-01-01

The reaction of nucleophilic addition of oximes (HON=CRR 1 ) to organic nitriles coordinated in the rhenium complexes trans-/cis-[ReCl 4 (NCCH 3 ) 2 ] was theoretically studied by the Hartree-Fock and density functional theory (B3LYP) methods. The reaction mechanism involves (I) the initial change of the oxime conformation; (II) the formation of the orientation complex with the coordinated nitrile molecule, which transforms into a four-membered transition state; (III) the formation of the addition product in a less stable conformation; and (IV) the formation of the ultimate addition product. The calculations make it possible to interpret the activation of nitriles in terms of the activated complex theory as a result of stabilization of the transition state in going from the free to the coordinated nitrile [ru

Development of a diesel substitute fuel

Energy Technology Data Exchange (ETDEWEB)

Reiter, Anton; Mair-Zelenka, Philipp [Graz Univ. of Technology (Austria). Inst. of Chemical Engineering and Environmental Technology; Zeymer, Marc [OMV Refining and Marketing GmbH, Vienna (Austria). MRDI-D Product Development and Innovation

2013-06-01

Substitute fuels composed of few real chemical compounds are an alternative characterisation approach for conventional fuels as opposed to the traditional pseudo-component method. With the algorithm proposed in this paper the generation of such substitutes will be facilitated and well-established thermodynamic methods can be applied for physical property-data prediction. Based on some quality criteria like true boiling-point curve, liquid density, C/H ratio, or cloud point of a target fuel a surrogate which meets these properties is determined by fitting its composition. The application and capabilities of the algorithm developed are demonstrated by means of an exemplary diesel substitute fuel. The substitute mixture obtained can be generated and used for evaluation of property-prediction methods. Furthermore this approach can help to understand the effects of mixing fossil fuels with biogenic compounds. (orig.)

Organically bound deuterium in soybean exposed to atmospheric D2O vapor as a substitute for HTO under different growth phase

International Nuclear Information System (INIS)

Ichimasa, Michiko; Maejima, Takuya; Seino, Nami; Ara, Tetsuki; Masukura, Akari; Nishihiro, Sayaka; Tauchi, Hiroshi; Ichimasa, Yusuke

2003-01-01

Heavy water vapor release experiments were carried out in a greenhouse using deuterium as a substitute for tritium and uptake and loss kinetics of D 2 O in leaves and formation, translocation and retention of organically bound deuterium (OBD) in bean soybean exposed to D 2 O under different growth phase were investigated. Rate constants of D 2 O uptake in leaves of soybean in the daytime release were 0.6 - 6.1 hr -1 and several times higher than those in the nighttime release. Rate constants of D 2 O loss in leaves after daytime release were almost the same as those after the nighttime release. No significant difference in the half time of D 2 O loss was observed between daytime and nighttime releases. After D 2 O release, OBD concentration in bean in daytime experiments increased with time until 3 - 4 days of the experiments and then decreased with time. The OBD concentrations in bean in daytime release were several times higher than those in nighttime release while the extents of decrease of OBD concentration were somewhat lower than those in the daytime experiment. (author)

Enhancement in magnetic and dielectric properties of La and Pr co substituted BiFeO3

International Nuclear Information System (INIS)

Srivastava, Amit; Singh, H.K.; Awana, V.P.S.; Srivastava, O.N.

2013-01-01

Highlights: ► Significant enhancement in magnetization of BiFeO 3 is found on La and Pr co substitution. ► It is correlated with structural phase transformation and nanosized crystallites. ► Dielectric losses strongly diminish with La and Pr co substitution. -- Abstract: This report underlines the systematic studies of crystalline structure, magnetic and ferroelectric properties of polycrystalline Bi 1−x−y La x Pr y FeO 3 ceramic samples, in which x changes continuously from 0 to 0.2 for y = 0 and y from 0 to 0.2 for x = 0.2. X-ray diffraction (XRD) patterns revealed that La and Pr substitution at Bi site in the ceramic eliminates the usual impurity phases completely. Rietveld refinement of the XRD patterns shows that the crystal structure changes gradually from Rhombohedral (R3c) to Orthorhombic (pbnm) with increasing La and Pr concentration. This transition has significant effects on the multiferroic properties of Bi 1−x−y La x Pr y FeO 3 ceramics. Substantial enhancement in magnetization of Bi 1−x−y La x Pr y FeO 3 has been observed and this is found to be correlated with the evolution of structural phase change with doping of Pr in samples having lanthanum concentration of x = 0.2. This leads to the suppression of helical spin order. However, the enhancement in magnetic behavior also takes place due to nanocrystallite nature of Bi 1−x−y La x Pr y FeO 3 (x = 0.2, y = 0.05–0.2). For the nanocrystallites having sizes lower than 62 nm, which is the period of spin cycloid, this spin configuration will get destroyed resulting in the enhancement of magnetization. The studies of microstructures employing SEM and TEM revealed that Bi 1−x−y La x Pr y FeO 3 consists of nano size grained microstructures. It is also found that dielectric constant and dielectric loss get improved by La and Pr co-substitution. The dielectric constant for x = 0.0, y = 0.0 is 81 which changes to 354 for x = 0.2, y = 0.15 at 100 Hz. Dielectric losses are strongly

UV action spectroscopy of protonated PAH derivatives. Methyl substituted quinolines

DEFF Research Database (Denmark)

Klærke, Benedikte; Holm, Anne; Andersen, Lars Henrik

2011-01-01

using the electrostatic storage ring ELISA, an electrospray ion source and 3 ns UV laser pulses. Results. It is shown that the absorption profile is both redshifted and broadened when moving the methyl group from the heterocycle containing nitrogen to the homoatomic ring. The absorption profiles......Aims. We investigate the production of molecular photofragments upon UV excitation of PAH derivatives, relevant for the interstellar medium. Methods. The action absorption spectra of protonated gas-phase methyl-substituted quinolines (CH3−C9H7NH+) have been recorded in the 215–338 nm spectral range...

Effect of Ga substitution on the crystallization behaviour and glass forming ability of Zr-Al-Cu-Ni alloys

International Nuclear Information System (INIS)

Singh, Devinder; Yadav, T.P.; Mandal, R.K.; Tiwari, R.S.; Srivastava, O.N.

2010-01-01

The crystallization behaviour of melt spun Zr 69.5 Al 7.5-x Ga x Cu 12 Ni 11 (x = 0-7.5; in at.%) metallic glasses has been investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The DSC traces showed changes in crystallization behaviour with substitution of Ga. Formation of single nano-quasicrystalline phase by controlled crystallization of glasses has been found only for 0 ≤ x ≤ 1.5. Further increase of Ga content gives rise to formation of the quasicrystals together with Zr 2 Cu type crystalline phase. In addition to this, the substitution of Ga influences the size and shape of nano-quasicrystals. The glass forming abilities (GFAs) of these metallic glasses were assessed by the recognition of glass forming ability indicators, i.e. reduced glass transition temperature (T rg ) and supercooled liquid region (ΔT x ). The glass transition temperature (T g ) has been observed for all the melt spun ribbons.

Composition-dependent magnetic properties of melt-spun La or/and Ce substituted nanocomposite NdFeB alloys

Energy Technology Data Exchange (ETDEWEB)

Hussain, M.; Zhao, L.Z.; Zhang, C.; Jiao, D.L.; Zhong, X.C.; Liu, Z.W.

2016-02-15

Aiming at high-performance low-cost NdFeB magnets, the magnetic properties and microstructure for melt spun nanocrystalline (Nd{sub 1−x}M{sub x}){sub 10}Fe{sub 84}B{sub 6} (M=La, Ce, or La{sub 0.5}Ce{sub 0.5}; x=0–0.7) alloys were investigated. Relatively, LaCe-substituted alloys show high values of the remanent magnetization M{sub r}, the maximum energy product (BH){sub max} and the coercivity H{sub c}, up to 114 emu/g (1.07 T), 147 kJ/m{sup 3} and 471 kA/m, respectively, at x=0.1. The unusual increase in coercivity for the alloys with 10% La or 10% La{sub 0.5}Ce{sub 0.5} substitution is possibly attributed to the phase segregation in alloys with certain La or LaCe contents. The reduced Curie temperature and spin-reorientation temperature were obtained for La, Ce or LaCe substituted alloys. Transmission electron microscope analysis has revealed that a fine and uniform distributed grain structure leads to remanence enhancement for La{sub 0.5}Ce{sub 0.5} substituted alloys. The present results indicate that partially substituting Nd by La or/and Ce cannot only effectively reduce the cost of nanocrystalline NdFeB based magnetic powders but also can maintain a relatively good combination of magnetic properties.

Investigation of Structural, Morphological, Magnetic Properties and Biomedical applications of Cu2+ Substituted Uncoated Cobalt Ferrite Nanoparticles

Directory of Open Access Journals (Sweden)

M. Margabandhu

Full Text Available ABSTRACT In the present work, Cu2+ substituted cobalt ferrite (Co1-xCuxFe2O4, x = 0, 0.3, 0.5, 0.7 and 1 magnetic nanopowders were synthesized via chemical co-precipitation method. The prepared powders were investigated by various characterization methods such as X-ray diffraction analysis (XRD, scanning electron microscope analysis (SEM, vibrating sample magnetometer analysis (VSM and fourier transform infrared spectroscopy analysis (FTIR. The XRD analysis reveals that the synthesized nanopowders possess single phase centred cubic spinel structure. The average crystallite size of the particles ranging from 27-49 nm was calculated by using Debye-scherrer formula. Magnetic properties of the synthesized magnetic nanoparticles are studied by using VSM. The VSM results shows the magnetic properties such as coercivity, magnetic retentivity decreases with increase in copper substitution whereas the saturation magnetization shows increment and decrement in accordance with Cu2+ substitution in cobalt ferrite nanoparticles. SEM analysis reveals the morphology of synthesized magnetic nanoparticles. FTIR spectra of Cu2+ substituted cobalt ferrite magnetic nanoparticles were recorded in the frequency range 4000-400cm-1. The spectrum shows the presence of water adsorption and metal oxygen bonds. The adhesion nature of Cu2+ substituted cobalt ferrite magnetic nanoparticles with bacteria in reviewed results indicates that the synthesized nanoparticles could be used in biotechnology and biomedical applications.

Synthesis and pharmacological investigation of 2-(4-dimethylaminophenyl)-3,5-disubstituted thiazolidin-4-ones as anticonvulsants.

Science.gov (United States)

Senthilraja, Manavalan; Alagarsamy, Veerachamy

2012-10-01

A new series of 2-(4-dimethylaminophenyl)-3-substituted thiazolidin-4-one-5-yl-acetyl acetamides/benzamides were synthesized by the nucleophilic substitution of 3-substituted-2-(4-dimethylaminophenyl)-thiazolidin-4-one-5-yl-acetylchloride with acetamide and benzamide. The starting material 3-substituted-2-(4-dimethylaminophenyl)-thiazolidin-4-one-5-yl-acetylchloride was synthesized from 3-substituted-2-(4-dimethylaminophenyl)-thiazolidin-4-one-5-yl-acetic acid, which in turn was prepared by one-pot reaction of amino component, p-dimethylamino benzaldehyde and mercapto succinic acid. The title compounds were investigated for their anticonvulsant activities; among the test compounds, compound 2-(4-dimethylaminophenyl)-3-phenylamino-thiazolidine-4-one-5-yl-acetylbenzamide (14) emerged as the most active compound of the series and as moderately more potent than the reference standard diazepam. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Tonemic Substitution

African Journals Online (AJOL)

Ezenwafor

grammatical constructions. The choice of substitutable tonemes as observed from the analyzed data is highly. Ezenwafordependent on the intuitive judgement of the native speaker. This work shows with adequate data, that regular tonemic changes are not always meaningful in Ekwulobia lect. Such tonemic alternations are ...

Role of grain boundaries in the conduction of Eu–Ni substituted Y-type hexaferrites

Energy Technology Data Exchange (ETDEWEB)

Ali, Irshad, E-mail: irshadalibzu@gmail.com [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Islam, M.U. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Naeem Ashiq, Muhammad, E-mail: naeemashiqqau@yahoo.com [Institute of Chemical Sciences, Bahauddin Zakariya University, Multan 60800 (Pakistan); Asif Iqbal, M. [National University of Sciences and Technology, EME College, Islamabad (Pakistan); Khan, Hasan M. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Murtaza, G. [Centre for Advanced Studies in Physics, Government College University, Lahore 54000 (Pakistan)

2014-08-01

Single phase nanostructured (Eu–Ni) substituted Y-type hexaferrites with nominal composition of Sr{sub 2}Co{sub 2−x}Ni{sub x}Eu{sub y}Fe{sub 12−y}O{sub 22} (x=0.0–1, y=0.0–0.1) were synthesized by the microemulsion method. Temperature dependent DC electrical conductivity and drift mobility were found in good agreement with each other, reflecting semiconducting behavior. The presence of Debye peaks in imaginary electric modulus curves confirmed the existence of relaxation phenomena in given frequency range. The AC conductivity follows power law, with exponent (n) value, ranges from 0.81–0.97, indicating that the mechanism is due to polaron hopping. In the present ferrite system, Cole–Cole plots were used to separate the grain and grain boundary effects. Eu–Ni substitution leads to a remarkable rise of grain boundary resistance as compared to the grain resistance. As both AC conductivity and Cole–Cole plots are the functions of concentration, they reveal the dominant contribution of grain boundaries in the conduction mechanism. It was also observed that the AC activation energy is lower than the DC activation energy. Appreciable improved values of quality factor suggested the possible use of these synthesized materials for power applications and high frequency multilayer chip inductors. - Highlights: • Single phase nanostructures were synthesized by the micro-emulsion method. • Substitution leads to a remarkable rise of grain boundary resistance. • The AC activation energy is lower than the DC activation energy. • Improved values of quality factor make these materials useful for high frequency multilayer chip inductors.

40 CFR Appendix B to Subpart G of... - Substitutes Subject to Use Restrictions and Unacceptable Substitutes

Science.gov (United States)

2010-07-01

... demonstrate it can be used safely in this end-use. CFC-12 Motor Vehicle Air Conditioners (Retrofit and New... Conditions Application Substitute Decision Conditions Comments CFC-12 Automobile Motor Vehicle Air... refrigerant. CFC-12 Automobile Motor Vehicle Air Conditioning (New equipment only) R-152a as a substitute for...

The substitution bias of the consumer price index

OpenAIRE

Frenger, Petter

2006-01-01

Abstract: The paper uses elementary consumer theory to propose an inflation independent ratio definition of the substitution bias of the Laspeyres consumer price index, and derives an approximate substitution bias which depends on the size of the price change as measured by a norm in the Laspeyres plane and on the elasticity of substitution in the direction of the price change. This norm or distance measure can be interpreted as a price substitution index which yields useful in...

Substitution of soybean meal for cottonseed meal in multiple supplements for grazing beef heifers in the dry season

Directory of Open Access Journals (Sweden)

Román Maza Ortega

2016-02-01

Full Text Available The objective of this study was to evaluate the effect of substituting soybean meal for cottonseed meal in multiple supplements on the nutritional characteristics and performance of beef heifers in their postweaning phase on Brachiaria decumbens pastures during the dry season. Twenty-four Nellore beef heifers (average initial age and weight of 8 mo and 210±6 kg, respectively were used. The design was completely randomized, with four treatments and six replicates. Supplements contained approximately 30% crude protein (CP and a progressive substitution of soybean meal for cottonseed meal (0, 50 and 100%. The control animals received only a mineral mixture ad libitum, and those on the other treatments received supplementation at 1.0 kg/animal/day. No differences were found in ADG between supplemented and control animals (P>0.10. Supplementation increased crude protein (CP intake only (P<0.10. The level of substitution of soybean meal for cottonseed meal did not affect (P>0.10 the intake of supplemented animals. Supplementation elevated the apparent digestibility coefficients (P<0.10 of OM, CP, NFC and TDN, but not EE or NDFap (P>0.10. A positive linear effect (P<0.10 of the level of substitution of soybean meal for cottonseed cake was observed on the digestibility of OM, NFC and TDN. Supplementation and the level of substitution had an effect (P<0.10 on the serum urea nitrogen and urine urea nitrogen contents. Supplementation or substitution level had no effect on the flow of microbial nitrogen to the intestine (MICN or efficiency of microbial protein synthesis (EMPS (P>0.10. Substitution caused a decreasing linear effect (P<0.10 on microbial nitrogen/nitrogen intake ratio (MICNR. In conclusion, substitution of soybean meal for cottonseed meal in multiple supplements during the dry season does not impair the productive performance of beef heifers.

Hydrothermal synthesis and characterization of Si and Sr co-substituted hydroxyapatite nanowires using strontium containing calcium silicate as precursors

International Nuclear Information System (INIS)

Zhang, Na; Zhai, Dong; Chen, Lei; Zou, Zhaoyong; Lin, Kaili; Chang, Jiang

2014-01-01

In the absence of any organic surfactants and solvents, the silicon (Si) and strontium (Sr) co-substituted hydroxyapatite [Ca 10 (PO 4 ) 6 (OH) 2 , Si/Sr-HAp] nanowires were synthesized via hydrothermal treatment of the Sr-containing calcium silicate (Sr-CS) powders as the precursors in trisodium phosphate (Na 3 PO 4 ) aqueous solution. The morphology, phase, chemical compositions, lattice constants and the degradability of the products were characterized. The Si/Sr-HAp nanowires with diameter of about 60 nm and up to 2 μm in length were obtained after hydrothermal treatment of the Sr-CS precursors. The Sr and Si substitution amount of the HAp nanowires could be well regulated by facile tailoring the Sr substitution level of the precursors and the reaction ratio of the precursor/solution, respectively. The SiO 4 tetrahedra and Sr 2+ ions occupied the crystal sites of the HAp, and the lattice constants increased apparently with the increase of the substitution amount. EDS mapping also suggested the uniform distribution of Si and Sr in the synthetic nanowires. Moreover, the Si/Sr-substitution apparently improved the degradability of the HAp materials. Our study suggested that the precursor transformation method provided a facile approach to synthesize the Si/Sr co-substituted HAp nanowires with controllable substitution amount, and the synthetic Si/Sr-HAp nanowires might be used as bioactive materials for hard tissue regeneration applications. - Highlights: • Si/Sr-HAp nanowires were hydrothermally transformed from Sr x -CaSiO 3 precursors. • The Si/Sr-substitution level could be facilely regulated. • The nanowire-like morphology and composition could be simultaneously regulated

Influence of La-Mn substitutions on magnetic properties of M-type strontium hexaferrites

Science.gov (United States)

Zi, Z. F.; Ma, X. H.; Wei, Y. Y.; Liu, Q. C.; Zhang, M.; Zhu, X. B.; Sun, Y. P.

2018-05-01

M-type strontium hexaferrites of Sr1-xLaxFe12-xMnxO19 (0.0≤x≤0.4) were synthesized by the chemical coprecipitation method. X-ray diffraction (XRD) studies indicate that the samples are single-phase with the space group of P63/mmc. The results of field-emission scanning electronic microscopy (FE-SEM) show that the grains are regular hexagonal platelets with sizes from 0.7 to 1.4 μm. It is observed that the value of Hc increases at low substitution (x ≤ 0.1), reaches a maximum at x = 0.1 and then decreases at x ≥ 0.1, while the value of Ms decreases monotonously with increasing x. The variations of magnetic properties can be tentatively attributed to the effects of La-Mn substitutions. The results above indicate that our samples might be promising candidates for permanent magnets in the future.

Operator substitution

NARCIS (Netherlands)

Hautus, M.L.J.

1994-01-01

Substitution of an operator into an operator-valued map is defined and studied. A Bezout-type remainder theorem is used to derive a number of results. The tensor map is used to formulate solvability conditions for linear matrix equations. Some applications to system theory are given, in particular

Substitution reactions of technetium complexes

International Nuclear Information System (INIS)

Omori, T.

1997-01-01

Substitution reactions of a series of technetium complexes are considered in comparison with corresponding reactions of rhenium. Rhenium and technetium complexes are rather inert in substitution reactions, the latter are characterized by greater rate constants when they proceed according to dissociative mechanism. In rare cases when k Tc /k Re id little it is assumed that the reaction proceeds according to the associative mechanism. (author)

Maximum parsimony, substitution model, and probability phylogenetic trees.

Science.gov (United States)

Weng, J F; Thomas, D A; Mareels, I

2011-01-01

The problem of inferring phylogenies (phylogenetic trees) is one of the main problems in computational biology. There are three main methods for inferring phylogenies-Maximum Parsimony (MP), Distance Matrix (DM) and Maximum Likelihood (ML), of which the MP method is the most well-studied and popular method. In the MP method the optimization criterion is the number of substitutions of the nucleotides computed by the differences in the investigated nucleotide sequences. However, the MP method is often criticized as it only counts the substitutions observable at the current time and all the unobservable substitutions that really occur in the evolutionary history are omitted. In order to take into account the unobservable substitutions, some substitution models have been established and they are now widely used in the DM and ML methods but these substitution models cannot be used within the classical MP method. Recently the authors proposed a probability representation model for phylogenetic trees and the reconstructed trees in this model are called probability phylogenetic trees. One of the advantages of the probability representation model is that it can include a substitution model to infer phylogenetic trees based on the MP principle. In this paper we explain how to use a substitution model in the reconstruction of probability phylogenetic trees and show the advantage of this approach with examples.

Type Substitution for Object-Oriented Programming

DEFF Research Database (Denmark)

Schwartzbach, Michael Ignatieff; Palsberg, Jens

1990-01-01

Genericity allows the substitution of types in a class. This is usually obtained through parameterized classes, although they are inflexible since any class can be inherited but is not in itself parameterized. We suggest a new genericity mechanism, type substitution, which is a subclassing concep...

Partial substitution of asphalt pavement with modified sulfur

Directory of Open Access Journals (Sweden)

E.R. Souaya

2015-12-01

Full Text Available The use of sulfur in pavement laying was developed in 1980 but it was restricted in the late 19th century due to its environmental problems and its high reactivity toward oxidation processes which give sulfuric acid products that are capable of destroying the asphalt mixture. The study involved the conversion of elemental sulfur to a more stable modified one using a combination of byproducts of olefin hydrocarbons that were obtained from petroleum fractional distillates and cyclic hydrocarbon bituminous residue at 145 °C. The changes in the structural characteristics and morphology of prepared modified sulfur were studied using XRD and SEM respectively. Also DSC curves help us to elucidate the changes in sulfur phases from α-orthorhombic to β-mono clinic structure. The technique of nanoindentation helps us to compare the mechanical properties of modified and pure sulfur including modulus of elasticity and hardness. The hot mixture asphalt designs were prepared according to the Marshall Method in which the asphalt binder content was partially substituted with 20%, 30%, 40%, and 50% modified sulfur. The mechanical properties were measured including Marshall Stability, flow, air voids, and Marshall Stiffness. From the overall study, the results indicated that asphalt could partially be substituted with modified sulfur with no significant deleterious effect on performance and durability of hot mixed asphalt.

40 CFR 721.5350 - Substituted nitrile (generic name).

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted nitrile (generic name... Substances § 721.5350 Substituted nitrile (generic name). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as a substituted nitrile (PMN P-83...

Molecular Interactions of Plutonium(VI) with Synthetic Manganese-Substituted Goethite

Energy Technology Data Exchange (ETDEWEB)

Hu, Yung-Jin; Schwaiger, Luna Kestrel; Booth, Corwin H.; Kukkadapu, Ravi K.; Cristiano, Elena; Kaplan, Daniel; Nitsche, Heino

2010-03-09

Plutonium(VI) sorption on the surface of well-characterized synthetic manganese-substituted goethite minerals (Fe1-xMnxOOH) was studied using X-ray absorption spectroscopy. We chose to study the influence of manganese as a minor component in goethite, because goethite rarely exists as a pure phase in nature. Manganese X-ray absorption near-edge structure measurements indicated that essentially all the Mn in the goethite existed as Mn(III), even though Mn was added during mineral synthesis as Mn(II). Importantly, energy dispersive X-ray analysis demonstrated that Mn did not exist as discrete phases and that it was homogeneously mixed into the goethite to within the limit of detection of the method. Furthermore, Mössbauer spectra demonstrated that all Fe existed as Fe(III), with no Fe(II) present. Plutonium(VI) sorption experiments were conducted open to air and no attempt was made to exclude carbonate. The use of X-ray absorption spectroscopy allows us to directly and unambiguously measure the oxidation state of plutonium in situ at the mineral surface. Plutonium X-ray absorption near-edge structure measurements carried out on these samples showed that Pu(VI) was reduced to Pu(IV) upon contact with the mineral. This reduction appears to be strongly correlated with mineral solution pH, coinciding with pH transitions across the point of zero charge of the mineral. Furthermore, extended X-ray absorption fine structure measurements show evidence of direct plutonium binding to the metal surface as an inner-sphere complex. This combination of extensive mineral characterization and advanced spectroscopy suggests that sorption of the plutonium onto the surface of the mineral was followed by reduction of the plutonium at the surface of the mineral to form an inner-sphere complex. Because manganese is often found in the environment as a minor component associated with major mineral components, such as goethite, understanding the molecular-level interactions of plutonium with

Crystal phase transition in LixNa1-xGdF4 solid solution nanocrystals - Tuning of optical properties

KAUST Repository

Bański, Mateusz; Afzaal, Mohammad; Cha, Dong Kyu; Wang, X.; Tan, Hua; Misiewicz, Jan J.; Podhorodecki, Artur P.

2014-01-01

field symmetry and emission properties from doped europium (Eu3+) ions. We report that for lithium (Li+) substitution <15%, the hexagonal crystal field is preferred, while the Eu3+ emission is already tuned, whereas at higher Li+ substitution, a phase

Tether-directed synthesis of highly substituted oxasilacycles via an intramolecular allylation employing allylsilanes

Directory of Open Access Journals (Sweden)

Cox Liam R

2007-02-01

Full Text Available Abstract Background Using a silyl tether to unite an aldehyde electrophile and allylsilane nucleophile into a single molecule allows a subsequent Lewis-acid-mediated allylation to proceed in an intramolecular sense and therefore receive all the benefits associated with such processes. However, with the ability to cleave the tether post allylation, a product that is the result of a net intermolecular reaction can be obtained. In the present study, four diastereoisomeric β-silyloxy-α-methyl aldehydes, which contain an allylsilane tethered through the β-carbinol centre, have been prepared, in order to probe how the relative configuration of the two stereogenic centres affects the efficiency and selectivity of the intramolecular allylation. Results Syn-aldehydes, syn-4a and syn-4b, both react poorly, affording all four possible diastereoisomeric oxasilacycle products. In contrast, the anti aldehydes anti-4a and anti-4b react analogously to substrates that lack substitution at the α-site, affording only two of the four possible allylation products. Conclusion The outcome of the reaction with anti-aldehydes is in accord with reaction proceeding through a chair-like transition state (T.S.. In these systems, the sense of 1,3-stereoinduction can be rationalised by the aldehyde electrophile adopting a pseudoaxial orientation, which will minimise dipole-dipole interactions in the T.S. The 1,4-stereoinduction in these substrates is modest and seems to be modulated by the R substituent in the starting material. In the case of the syn-substrates, cyclisation through a chair T.S. is unlikely as this would require the methyl substituent α to the reacting carbonyl group to adopt an unfavourable pseudoaxial position. It is therefore proposed that these substrates react through poorly-defined T.S.s and consequently exhibit essentially no stereoselectivity.

Superconductivity and Competing Ordered Phase in RuPn (Pn = As, P)

Science.gov (United States)

Hirai, Daigorou; Takayama, Tomohiro; Hashizume, Daisuke; Yamamoto, Ayako; Takagi, Hidenori

2011-03-01

Unconventional superconductivity likely manifests itself when some competing electronic phases are suppressed down to zero temperature such as cuprates and iron-pnictide superconductors. Therefore, the correlated metallic state neighboring a competing electronic ordering can be a promising playground for unconventional superconductivity. Here we report superconductivity emerging adjacent to electronically ordered phases of RuPn (Pn = As, P). We found that RuAs(P) exhibits phase transitions at 240 (265) K, which is discerned as a drop of magnetic susceptibility or a resistivity upturn. Such anomalies can be suppressed by substituting Rh to the Ru site. Accompanied by the disappearance of the electronic order, superconductivity was found to emerge below 1.8 K and 3.8 K for RuAs and RuP, respectively. The superconductivity in Rh substituted RuPn, which neighbors a competing electronic order, might exhibit an exotic pairing state as seen in the unconventional superconductors known to date.

Sodium-carbonate co-substituted hydroxyapatite ceramics

Directory of Open Access Journals (Sweden)

Zoltan Z. Zyman

2013-12-01

Full Text Available Powders of sodium-carbonate co-substituted hydroxyapatite, having sodium content in the range of 0.25–1.5 wt.% with a 0.25 wt.% step, were prepared by a precipitation-solid state reaction route. Compacts of the powders were sintered in a CO2 flow (4 mL/min at 1100 °C for 2 h. The sintered ceramics contained sodium and carbonate ions in the ranges of 0–1.5 wt.% and 1.3–6 wt.%, respectively, which are typical impurity concentrations in biological apatite. A relationship between sodium and carbonate contents and the type of carbonate substitution was found. The total carbonate content progressively increased with the sodium content. The obtained ceramics showed an AB-type carbonate substitution. However, the substitution became more B-type as the sodium content increased. As a result, the carbonation was almost B-type (94 % for the highest sodium content (1.5 wt.%.

Significant reduction of saturation magnetization and microwave-reflection loss in barium-natural ferrite via Nd3+ substitution

Science.gov (United States)

Widanarto, W.; Ardenti, E.; Ghoshal, S. K.; Kurniawan, C.; Effendi, M.; Cahyanto, W. T.

2018-06-01

To minimize the signal degradation, many electronic devices require efficient microwave absorbers with very low reflection-losses within the X-band. We prepared a series of trivalent neodymium-ion (Nd3+) substituted barium-natural ferrite using a modified solid-state reaction method. The effect of the Nd3+-ion content on the structure, surface morphology, magnetic properties, and microwave reflection loss was studied. The composites were characterized using X-ray diffraction, a vibrating sample magnetometer, scanning electron microscopy, and a vector network analyzer. The XRD patterns of the sample without Nd3+ reveal the presence of BaFe12O19 (hexagonal) and BaFe2O4 (rhombohedral) phases. Furthermore, a new hexagonal crystal phase of Ba6Nd2Fe4O15 appeared after substituting Nd3+. The average size of the prepared barium-natural ferrite particles was estimated to be between 0.4 and 0.8 μm. Both saturation magnetization and microwave reflection losses of these barium-ferrites were significantly reduced by increasing the Nd3+ content.

Educators Take Another Look at Substitutes

Science.gov (United States)

Zubrzycki, Jaclyn

2012-01-01

The mythology surrounding the substitute teacher is not a pretty one: Paper airplanes, lost learning, bullying. But as schools collect more information about teacher absenteeism and its consequences, districts and schools are exploring ways to professionalize substitute teaching--or experiment with alternative ways of coping with teacher absences.…

Carrier-added and no-carrier-added syntheses of [18F]spiroperidol and [18F]haloperidol

International Nuclear Information System (INIS)

Kilbourn, M.R.; Welch, M.J.; Dence, C.S.; Tewson, T.J.; Saji, H.; Maeda, M.

1984-01-01

Syntheses of [ 18 F]haloperidol and [ 18 F]spiroperidol in both no-carrier-added and carrier-added forms have been accomplished. The no-carrier-added [ 18 F]butyrophenone neuroleptics were prepared in low ( 18 F-neuroleptics were prepared in better (5-17%) yields by 18 F-for- 19 F nucleophilic aromatic substitution. The preparation of all synthetic precursors, and procedures for radiolabeling are fully described. (author)

NMR 11B, 19F of hydroxofluoroborate solutions in acetic and peracetic acids

International Nuclear Information System (INIS)

Shchetinina, G.P.; Brovkina, O.V.; Chernyshov, B.N.

1985-01-01

Hydroxofluoroborate solutions in acetic and peracetic acids are studied by the 11 B, 19 F NMR method. The reactions of substitutions of acetate- and peracetate ions for nucleophilic hydroxogroups with the formation of the respective complexes are shown to occur in these solutions, with monodentate coordination of BF 3 CH 3 COO - - and BF 3 CH 3 COOO - - groups being accomplished in this case

Sensory Substitution and Multimodal Mental Imagery.

Science.gov (United States)

Nanay, Bence

2017-09-01

Many philosophers use findings about sensory substitution devices in the grand debate about how we should individuate the senses. The big question is this: Is "vision" assisted by (tactile) sensory substitution really vision? Or is it tactile perception? Or some sui generis novel form of perception? My claim is that sensory substitution assisted "vision" is neither vision nor tactile perception, because it is not perception at all. It is mental imagery: visual mental imagery triggered by tactile sensory stimulation. But it is a special form of mental imagery that is triggered by corresponding sensory stimulation in a different sense modality, which I call "multimodal mental imagery."

The radiochemistry of [18 F]-FDG: the first experience in Mexico

International Nuclear Information System (INIS)

Lopez D, F.A.

2004-01-01

The present work describes the more used method for the synthesis of 2 - [ 18 F] - fluorine-2-deoxy-D-glucose that is the more used radiopharmaceutical in the nuclear medicine in the cancer diagnostic. The process consists on two chemical reactions: i) [ 18 F - ] - nucleophilic radio fluorination and i i) a hydrolysis catalyzed by acid. The first reaction incorporates to the [ 18 F]- fluorine labelled inside the organic precursor 1,3,4,6-tetra- O -acetil-2- O-trifluoromethanesulfonyl- β-D-mannopyranose (triflate of mannose). The mechanism of this reaction is a bimolecular nucleophilic substitution (SN 2 ) with the ion [ 18 F - ] - fluoride; in the second reaction, the hydrolysis of those protective acetyl groups generate the hydroxyl groups free of the [ 18 F]-FDG. The process includes an azeotropic distillation and several purification steps. (Author)

Stores, Prices, and Currency Substitution

OpenAIRE

Gabriele, Camera; Winkler, Johannes

1999-01-01

We study endogenous currency substitution in a decentralized trade environment. Sellers maximize profits from sales of imperfectly substitutable goods by posting prices in either one of two currencies. A unique symmetric equilibrium exists where goods are priced only in the local currency. This occurs if foreign trade is sporadic, there is sufficient but not excessive liquidity, and discounting is low. Excess or scarcity of liquidity, however, induces sellers to extract all surplus from bu...

Commercial formalin substitutes for histopathology

DEFF Research Database (Denmark)

Prentø, P; Lyon, H

1997-01-01

We compared the performance of six commercial fixatives proposed to be formalin substitutes with the performance of buffered formalin, Clarke's ethanol-acetic acid, and ethanol, using rat liver, small intestine, and kidney. We investigated the rate of penetration, mode of fixation, extent of prot...... was obtained by combining formalin fixation with antigen retrieval. We conclude that none of the proposed commercial substitutes for buffered formalin are adequate for critical histology or histopathology....

Preparation of a calcium-substituted copper-rich yttrium barium copper oxide superconductor from a spray-dried nitrate precursor

International Nuclear Information System (INIS)

Gyurov, G.; Khristova, I.; Peshev, P.; Abrashev, M.V.

1993-01-01

A calcium-substituted YBa 2 Cu 4 O 8 (1-2-4) high-temperature superconductor is synthesized from a precursor obtained by spray-drying of a nitrate solution containing the corresponding metals in a stoichiometric ratio. The synthesis takes place during one-stage heat-treatment of the precursor at 800 C in an oxygen flow under a pressure of 1 atm within a relatively short period of time, additives as well as intermediate grinding and pressing of the products being not needed. Measurements of the a.c. susceptibility have revealed a very sharp superconducting transition which is comparable with that of samples prepared under a high pressure. The transition in Ca-substituted YBa 2 Cu 4 O 8 occurs at a temperature by about 8 K higher than T c of the Ca-free phase. Raman spectra suggest that during the substitution calcium does not occupy barium positions in the YBa 2 Cu 4 O 8 lattice

Exploring the Photoreduction of Au(III) Complexes in the Gas-Phase

Science.gov (United States)

Marcum, Jesse C.; Kaufman, Sydney H.; Weber, J. Mathias

2010-06-01

We have used photodissociation spectroscopy to probe the electronic structure and photoreduction of Au(III) in gas-phase complexes containing Cl- and OH-. The gas-phase electronic spectrum of [AuCl_4]- closely resembles the aqueous solution spectrum, showing a lack of strong solvatochromic shifts. Substitution of Cl- ligands with OH- results in a strong blue shift, in agreement with ligand-field theory. Upon excitation, [AuCl_4]- can dissociate by loss of either one or two neutral Cl atoms, resulting in the reduction of gold from Au(III) to Au(II) and Au(I) respectively. The hydroxide substituted complex, [AuCl_2(OH)_2]-, demonstrates similar behavior but the only observable fragment channel is the loss of two neutral OH ligands, leading only to Au(I).

France prefers methanol for long term use as gasoline substitute

Energy Technology Data Exchange (ETDEWEB)

1981-11-02

The French carburol programme, which plans to reduce its consumption of gasoline from imported crude oil, based on methanol and butanol-acetone mixtures was detailed recently at the ECMRA in Cannes. The programme envisages the production of methanol from synthesis gas generated by the gasification of materials such as wood, coal, lignite and heavy oil residues. Also planned is the production of mixtures of butanol and acetone from such biomass sources as straw, Jerusalem artichoke, sugar cane and beet and alfalfa by hydrolysis followed by fermentation. In the first phase of the programme, up to 1985, methanol and butanol-acetone may be added to all premium gasoline sold in France up to 10% so that engine modification is not required. A higher alcohol content mixture, 25-50% is planned for the second phase to run in modified cars. The substitution of 50% of French gasoline could be achieved by 1995 by the production of 8m. ton/year oil equivalent of carburol.

Carburants de substitution : orientations et recherches françaises Synthetic Fuels: French Orientation and Research

Directory of Open Access Journals (Sweden)

Guibet J. C.

2006-11-01

Full Text Available Le programme d'études et de recherches entrepris en France, depuis 1981, dans le domaine des carburants de substitution, porte à la fois sur l'examen des techniques d'obtention et sur les modalités d'utilisation de ces produits. Les travaux concernent essentiellement le méthanol, le système acétono-butylique et, pour les moteurs Diesel, les dérivés d'huiles végétales. On prévoit, dans une première phase, l'incorporation de faibles proportions - moins de 10 % - de produits organiques oxygénés dans le supercarburant sans modifier les spécifications du produit ni les conditions de réglage des véhicules. D'autres études sont effectuées sur des mélanges à teneur moyenne ou élevée en méthanol (30, 50 ou 90 % afin d'examiner les meilleures voies possibles pour une substitution plus importante. The research undertaken in France since 1981 in the field of alternative fuels includes both the ways of producing and the ways of using such products. These research projects mainly concern methanol, butanol-acetone system and, for diesel engines, vegetable-oil derivatives. In the first phase, plans are being made to incorporate small proportions (less then 10% of oxygenated organic products in premium gasoline without modifying either the specifications of the product or vehicle tuning conditions. Other research is being done on mixtures with a moderate or high methanol content (30, 50 or 90% so as to examine the best possible methods for substituting larger amounts.

The effects of Tb substitution for La on the magnetic properties of LaFe11.5Si1.5 compound

Science.gov (United States)

Imam, H.; Zhang, H. G.; Xu, L.; Zhao, J. L.; Gao, X. X.; Yue, M.

2018-05-01

The structural and magnetic properties of La1-yTbyFe11.5Si1.5 compounds have been investigated. The substituted 5 percent of Tb has remarkably increased the maximum entropy change (-ΔSM) to a value of 25.2 J/kg·K. However, a further increase of Tb leads to a monotonous decrease in the entropy change, mainly due to phase separation. The Tb substitution also can lower the thermal and magnetic hysteresis loss of the system. Another feature of this replacement is that, with Tb content higher than 10 percent, the Curie temperature (TC) starts to increase and reaches 197 K when 30 percent of La is substituted. These results indicate that La1-yTbyFe11.5Si1.5 may be a promising candidate for magnetic refrigeration material in certain temperature range.

Formation of a sodium bicarbonate cluster in the structure of sodium-substituted hydroxyapatite

Science.gov (United States)

Tkachenko, M. V.; Kamzin, A. S.

2015-02-01

Ceramic sodium-substituted carbonated hydroxyapatite has been synthesized using the method of the solid-phase reaction in the temperature range of 640-820°C in water vapor. It has been established that substitutions of Ca2+ ions in the cation and anion subsystems with Na+ ions and the PO{4/3-} and OH- groups with CO{3/2-} ions lead to a considerable acceleration of the shrinkage and synthesis of dense ceramics at substantially lower temperatures than in the case of unsubstituted hydroxyapatite. Sintering in water vapor leads to densification of carbonate groups in channel positions, which induces the appearance of orderings of A2 and B2 types (bands with wave numbers 867 and 865 cm-1 in IR spectra, respectively) as well as the protonation of carbonate groups both in A and B sites and the formation of sodium bicarbonate clusters (856 and 859 cm-1) in addition to carbonate ordering of A1 and B1 types (879 and 872 cm-1).

Modulation in magnetic exchange interaction, core shell structure and Hopkinson's peak with chromium substitution into Ni0.75Co0.25Fe2O4 nano particles

Science.gov (United States)

Uday Bhasker, S.; Choudary, G. S. V. R. K.; Reddy, M. V. Ramana

2018-05-01

The ever growing applications and ever evolving challenges of magnetic nano particles has been motivating the researchers from various disciplines towards this area of magnetic nano particles. Cation substitutional effect on the magnetic structure of the nanoparticles forms a crucial aspect in their applications. Here the environmentally benign auto combustion method was employed to synthesize chromium substituted nickel cobalt ferrite (Ni0.75Co0.25Fe2-xCrxO4; x = 0, 0.10, 0.15) nano particles, from aqueous metal nitrate solutions. Chromium substitution has shown its effect on the structural, magnetic and electrical properties of Ni0.75Co0.25Fe2O4. Structural and phase analysis of the prepared samples show increased phase purity of ferrite sample with increasing Cr substitution. The TEM (Transmission Electron Microscope) image confirms the nano size of the particles, EDS (Energy dispersive X-ray Spectroscopy) has supported the stoichiometry of the prepared samples and FTIR (Fourier-transform infrared spectroscopic) analysis confirms the spinel structure and also suggests cation redistributions with chromium substitution. VSM (Vibrational Sample Magnetometer) is used to study the magnetic properties through magnetic hysteresis (M-H) loop and magnetic Hopkinson effect. All samples show hysteresis and show reduction in magnetic properties with increase in chromium content. The thermo magnetic study shows Hopkinson peak(s) in the magnetization vs. temperature (M-T) graph and also shows variation in the nature of Hopkinson peak with chromium substitution. Possible reasons for the changes in the nature of the peak are discussed.

The Pr and Ca Substitution in GdBa2Cu3O7- & delta

Directory of Open Access Journals (Sweden)

H. S. H.

2001-12-01

Full Text Available   The granular Gd1-x-zPrxCazBa2Cu3O7-δ high-temperature cuprate samples with 0.0 ≤ x ≤ 0.3 and 0.0≤ x ≤ 0.35 are prepared by standard solid state reaction and characterized by XRD and SEM techniques. The BaCuO2 and impurity phases are less than 1% in the samples having high levels of pr and Ca concentrations. The electrical resistivity measurements show a nonlinear reduction in Tc(x,z=etc versus x. Moreover, the Tc(z curve with x=0 is nonlinear and aplateau appears at z≈ 0.05-0.015. For Pr-Ca-doped samples with a constant concentration of Pr, Tc increases with the increase of Ca up to an optimum value of Ca doping and then in decreases. Based on these observations, we suggest that hole filling and hole localization the main effects of Pr ion substiution. The magnetic measurements indicate that the value of Hc1 is in the order of 10 mT. The mangetoresistance measurements have been measured and analyzed. The superconducting transition region is broadened by the application of magnetic field. The experimental data near the onsen of superconductivity are fitted with the Ambegakor and Halperin (AH phase-slip model. We observe that the AH parameter,γ (H, depends not only on the temperature and the magnetic field, but also on the Pr and Ca ions concentrations. It is observed that the critical current density increases with Ca substitution and decreases with Pr substitution in Gd-123 system. We suggest that the Pr ion substitution probably enhances the weak link, but the Ca ion acts as flux pinning center in the GdPrCa-123 system.

Biologic and synthetic skin substitutes: An overview

OpenAIRE

Halim, Ahmad Sukari; Khoo, Teng Lye; Mohd. Yussof, Shah Jumaat

2010-01-01

The current trend of burn wound care has shifted to more holistic approach of improvement in the long-term form and function of the healed burn wounds and quality of life. This has demanded the emergence of various skin substitutes in the management of acute burn injury as well as post burn reconstructions. Skin substitutes have important roles in the treatment of deep dermal and full thickness wounds of various aetiologies. At present, there is no ideal substitute in the market. Skin substit...

The structural studies of vanadium substituted lithium-bismuth-boro-tellurite glass

Science.gov (United States)

Madhu, A.; Eraiah, B.

2018-05-01

The structural studies of vanadium substituted lithium-bismuth-boro-tellurite glass is successfully prepared and certain analysis like XRD,FTIR,DTA/TGA with density, molar volume are done. The amorphous phase has been identified based on X-ray diffraction analysis. The vanadium oxide plays the role as a glass-modifier and influences on BO3 ↔ BO4 conversion. The observed nonlinear variation in Tg with vanadium oxide increase, it reflects structural changes. The nonlinear variation of density and molar volume can be attributed to vanadium oxide incorporation have increased the number of Non-bridging oxygen (NBO'S).

[Guidelines for substitution treatments in prison populations].

Science.gov (United States)

Michel, L; Maguet, O

2005-01-01

Care access for the drug addict patients in prison (in particular for the treatments of substitution) in France is very unequal from one establishment to another. This reflects the great variability of the practices of substitution and especially the absence of consensus on the methods of adaptation of these practices to the prison environment. Because of difficulties expressed by prisoners and medical staff on this subject and of stakes (let us recall that approximately 30% of the prisoners are dependent or abusers of one or more psychoactive substances), the formulation of recommendations or of a good practices guide of substitution in prison appeared necessary. Work that we detail here answers a ordering of the Advisory Commission of the Treatments of Substitution (September 2001) whose authors are members. It was presented at the session April 2003. It results from the confrontation of a review of the literature (including legal texts and official reports concerning substitution, the organization of the care in prison environment and the lawful framework), with a vast investigation. The latter was carried out near medical staff (22 prisons), penitentiary staff (3 prisons, 27 people met including directors of these establishments) and prisoners (7 establishments, 28 prisoners met) in the form of individual talks (semi-directing interviews with evaluation of the type of existing device and its knowledge by the penitentiary staff and the prisoners; statement of the suggestions, needs and requests of the medical, penitentiary staffs and of the prisoners). In the whole visited prisons, 7.8% (870) of the prisoners received substitution treatments (6.35% by buprenorphine, 1.44% by methadone), representing a proportion of substituted drug addicts (870 substituted for an evaluation of 3,350 prisoners drug addicts among the 11,168 prisoners of the 22 visited prisons) notably lower than that in free environment (56%, ie 96,000 substituted for an evaluated population of

REACH-related substitution within the Danish printing industry

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Bøg, Carsten; Markussen, Helene

are running a substitution project. A major part of the work has been mapping the presence of chemicals which are potential candidates for substitution (e.g. PBT, CMR, vPvB, EDS) within the Danish printing industry. The mapping comprises a combination of a literature study and an investigation of the actual......The accomplishment of the EU REACH regulation will most probably promote substitution within sectors handling a lot of different chemicals like the printing industry. With the aim of being at the cutting edge of this development the Danish EPA together with the Danish printing industry and IPU...... fulfil one or more of the criteria (e.g. CMR, EDS) for the REACH Annex XIV candidate list (authorisation). The paper presents the results of the mapping of chemical candidates and the first results of the actual substitutions. Keywords: REACH, chemicals, substitution, printing industry....

Effect of La3+ substitution on the phase transitions, microstructure and electrical properties of Bi1−xLaxFeO3 ceramics

International Nuclear Information System (INIS)

Zhang, Qiang; Zhu, Xiaohong; Xu, Yunhui; Gao, Haobin; Xiao, Yunjun; Liang, Dayun; Zhu, Jiliang; Zhu, Jianguo; Xiao, Dingquan

2013-01-01

Highlights: ► Structural properties of Bi 1−x La x FeO 3 ceramics are improved by La 3+ substitution. ► Significant magnetoelectric responses are observed in Bi 1−x La x FeO 3 ceramics. ► T C is lowered while T N is enhanced in the La-doped BiFeO 3 ceramics. ► Much higher dielectric constant is obtained in the La-doped BiFeO 3 ceramics. ► The ferroelectric properties are enhanced in the La-doped BiFeO 3 ceramics. - Abstract: Multiferroic Bi 1−x La x FeO 3 (x = 0.00, 0.05, 0.10, 0.15, 0.20) (represented as B 1−x L x FO) ceramics were prepared using the conventional solid state reaction route. The effects of La 3+ doping on the density, phase structure, morphology, dielectric and ferroelectric properties were investigated. Judging from X-ray diffraction patterns, all the B 1−x L x FO ceramic samples were well crystallized in a pure perovskite phase while the crystal structure changed from rhombohedral to orthorhombic with increasing the La 3+ substitution. SEM observations clearly revealed that the grain size was remarkably decreased by La 3+ doping. As a result, the ferroelectric Curie temperature was lowered in the La-doped ceramics. However, the abnormal dielectric responses near the antiferromagnetic Néel temperature (T N ) demonstrated the existence of remarkable magnetoelectric coupling in the Bi 1−x La x FeO 3 ceramics, and the T N was shown to increase substantially with the increase in La 3+ doping content. It was found that the dielectric permittivity of the ceramics was significantly increased and the dielectric loss was slightly increased with the increase in La 3+ content. The dielectric constant ε r of the Bi 0.85 La 0.15 FeO 3 ceramic at 10 kHz reached as high as 1008, 20 times larger than that for pure BiFeO 3 . In addition, the ferroelectric properties of the B 1−x L x FO ceramics were improved and the remanent polarization was increased by La 3+ doping. This is probably because the A-site doping with more stable La 3+ could

Dielectric spectroscopy of the SmQ* phase

Science.gov (United States)

Perkowski, P.; Bubnov, A.; Piecek, W.; Ogrodnik, K.; Hamplová, V.; Kašpar, M.

2011-11-01

Liquid crystal possessing two biphenyl moieties in the molecular core and lateral chlorine substitution far from the chiral chain has been studied by dielectric spectroscopy. On cooling from the isotropic phase, the material possesses the frustrated smectic Q* (SmQ*) and SmCA* phases. It has been confirmed by dielectric spectroscopy that the SmQ* phase can be related to the SmCA* anti-ferroelectric phase. However, only one relaxation process has been observed in the SmQ* phase, while in the SmCA*, two relaxations are clearly detectable. It seems that the mode found in the SmQ* can be connected with high-frequency anti-phase mode observed in the SmCA* phase. Its relaxation frequency is similar to PH relaxation frequency, but is weaker. The same relaxation has been observed even a few degrees above the SmQ*-Iso phase transition. Another explanation for the mode detected in SmQ* and isotropic phases can be molecular motions around short molecular axis.

Paramagnetism and antiferromagnetic interactions in single-phase Fe-implanted ZnO

CERN Document Server

Pereira, Lino Miguel da Costa; Correia, João Guilherme; Van Bael, M J; Temst, Kristiaan; Vantomme, André; Araújo, João Pedro

2013-01-01

As the intrinsic origin of the high temperature ferromagnetism often observed in wide-gap dilute magnetic semiconductors becomes increasingly debated, there is a growing need for comprehensive studies on the single-phase region of the phase diagram of these materials. Here we report on the magnetic and structural properties of Fe-doped ZnO prepared by ion implantation of ZnO single crystals. A detailed structural characterization shows that the Fe impurities substitute for Zn in ZnO in a wurtzite Zn$_{1−x}$Fe$_{x}$O phase which is coherent with the ZnO host. In addition, the density of beam-induced defects is progressively decreased by thermal annealing up to 900$^{\\circ}$C, from highly disordered after implantation to highly crystalline upon subsequent annealing. Based on a detailed analysis of the magnetometry data, we demonstrate that isolated Fe impurities occupying Zn substitutional sites behave as localized paramagnetic moments down to 2$^{\\circ}$K, irrespective of the Fe concentration and the density...

Protein substitute for children and adults with phenylketonuria.

Science.gov (United States)

Yi, Sarah H L; Singh, Rani H

2015-02-27

Phenylketonuria is an inherited metabolic disorder characterised by an absence or deficiency of the enzyme phenylalanine hydroxylase. The aim of treatment is to lower blood phenylalanine concentrations to the recommended therapeutic range to prevent developmental delay and support normal growth. Current treatment consists of a low-phenylalanine diet in combination with a protein substitute which is free from or low in phenylalanine. Guidance regarding the use, dosage, and distribution of dosage of the protein substitute over a 24-hour period is unclear, and there is variation in recommendations among treatment centres. This is an update of a Cochrane review first published in 2005, and previously updated in 2008. To assess the benefits and adverse effects of protein substitute, its dosage, and distribution of dose in children and adults with phenylketonuria who are adhering to a low-phenylalanine diet. We searched the Cochrane Cystic Fibrosis and Genetic Disorders Group Trials Register which consists of references identified from comprehensive electronic database searches and hand searches of relevant journals and abstract books of conference proceedings. We also contacted manufacturers of the phenylalanine-free and low-phenylalanine protein substitutes for any data from published and unpublished randomised controlled trials.Date of the most recent search of the Group's Inborn Errors of Metabolism Trials Register: 03 April 2014. All randomised or quasi-randomised controlled trials comparing: any dose of protein substitute with no protein substitute; an alternative dosage; or the same dose, but given as frequent small doses throughout the day compared with the same total daily dose given as larger boluses less frequently. Both authors independently extracted data and assessed trial quality. Three trials (69 participants) are included in this review. One trial investigated the use of protein substitute in 16 participants, while a further two trials investigated the

Muon substituted free radicals

International Nuclear Information System (INIS)

Burkhard, P.; Fischer, H.; Roduner, E.; Strub, W.; Gygax, F.N.; Brinkman, G.A.; Louwrier, P.W.F.; McKenna, D.; Ramos, M.; Webster, B.C.

1984-01-01

Spin polarized energetic positive muons are injected as magnetic probes into unsaturated organic liquids. They are implemented via fast chemical processes ( -10 s) in various molecules. Of particular interest among these are muonium substituted free radicals. The technique allows determination of accurate rate coefficients for fast chemical reactions of radicals. Furthermore, radiochemical processes occuring in picoseconds after injection of the muon are studied. Of fundamental interest are also the structural and dynamical implications of substituting a proton by a muon, or in other terms, a hydrogen atom by a muonium atom. Selected examples for each of these three types of experiments are given. (Auth.)

Pressure induced magneto-structural phase transitions in layered RMn2X2 compounds (invited)

International Nuclear Information System (INIS)

Kennedy, Shane; Wang, Jianli; Campbell, Stewart; Hofmann, Michael; Dou, Shixue

2014-01-01

We have studied a range of pseudo-ternaries derived from the parent compound PrMn 2 Ge 2 , substituting for each constituent element with a smaller one to contract the lattice. This enables us to observe the magneto-elastic transitions that occur as the Mn-Mn nearest neighbour distance is reduced and to assess the role of Pr on the magnetism. Here, we report on the PrMn 2 Ge 2−x Si x , Pr 1−x Y x Mn 2 Ge 2 , and PrMn 2−x Fe x Ge 2 systems. The pressure produced by chemical substitution in these pseudo-ternaries is inherently non-uniform, with local pressure variations dependent on the local atomic distribution. We find that concentrated chemical substitution on the R or X site (e.g., in Pr 0.5 Y 0.5 Mn 2 Ge 2 and PrMn 2 Ge 0.8 Si 1.2 ) can produce a separation into two distinct magnetic phases, canted ferromagnetic and canted antiferromagnetic, with a commensurate phase gap in the crystalline lattice. This phase gap is a consequence of the combination of phase separation and spontaneous magnetostriction, which is positive on transition to the canted ferromagnetic phase and negative on transition to the canted antiferromagnetic phase. Our results show that co-existence of canted ferromagnetic and antiferromagnetic phases depends on chemical pressure from the rare earth and metalloid sites, on local lattice strain distributions and on applied magnetic field. We demonstrate that the effects of chemical pressure bear close resemblance to those of mechanical pressure on the parent compound

Physico-chemical properties and solubility behaviour of multi-substituted hydroxyapatite powders containing silicon

International Nuclear Information System (INIS)

Sprio, S.; Tampieri, A.; Landi, E.; Sandri, M.; Martorana, S.; Celotti, G.; Logroscino, G.

2008-01-01

Hydroxyapatite powders characterized by ionic substitutions both in anionic and cationic sites were successfully prepared by synthesis in aqueous medium. The process parameters were set up to allow the simultaneous substitution of the foreign ions, namely carbonate, magnesium and silicon in the crystallographic site of calcium and phosphorus, keeping in count the competition which arises between atoms destined to occupy the same crystallographic site. The chemico-physical properties of the powders were investigated through several analytical techniques, i.e. X-ray diffraction, infrared spectroscopy, atomic emission spectroscopy and thermo-gravimetric analysis. The results show that the utilization of sodium hydrogen-carbonate as a reactant allows the entering of carbonate into the HA structure, mainly in phosphate position, while sodium is eliminated during the process of the powder washing. The entering of silicon in the HA structure progressively reduces its crystallinity, as also carbonate ions do. Silicate and carbonate ions can enter simultaneously into the HA structure, in biological-like amounts, although they compete for the occupation of the phosphate site; the powder crystallinity is strongly reduced as the content of the two substituting ions increases, so that a limit molar concentration exists where the apatite structure collapses and an amorphous phase forms with the simultaneous formation of crystalline calcium carbonate. Solubility tests, carried out at physiological conditions, reveal an increased calcium release in the HA powders containing silicon compared to the silicon-free HA; the solubility behaviour of the multi-substituted HA powders at physiological conditions makes these materials promising as bioactive bone scaffold, as they are able to continuously supply ions which are essential for the process of bone reconstruction

Effect of Gamma Radiation and Substitution on some Physical Properties for M-type Hexagonal Ferrites