WorldWideScience

Sample records for pfc sigma fixed

  1. P.F.C Sigma® cruciate retaining fixed-bearing versus mobile-bearing knee arthroplasty: a prospective comparative study with minimum 10-year follow-up.

    Science.gov (United States)

    Riaz, O; Aqil, A; Sisodia, G; Chakrabarty, G

    2017-12-01

    To prospectively compare long-term clinical and radiological outcomes following a cruciate retaining fixed-bearing (FB) and a mobile-bearing (MB) primary total knee replacement (TKR). We prospectively reviewed 113 TKRs in 99 patients (14 bilateral) with a PFC sigma cruciate retaining rotating platform system, at an average follow-up of 11.1 years (range 10-12). Results were contrasted with those from 89 TKRs in 72 patients (17 bilateral) with a PFC sigma cruciate fixed-bearing prosthesis, at an average follow-up of 12.1 years (range 10-14.1). Outcomes collected included pre- and post-operative range of motion, Oxford Knee Scores, complications encountered, as well as radiographical assessments of polyethylene wear. In the MB group, mean Oxford Knee Scores improved from 16 pre-operatively to 42 at final follow-up. The mean range of motion was 115° (75-130). In the FB group, mean Oxford Knee Scores improved from 16.2 pre-operatively to 42.5 at final follow-up. The mean range of motion was 111.2 (80-135) degrees at final follow-up. We failed to elicit an objectively demonstrable clinical difference between the MB- and FB-implanted knees. Similarly, radiological benefits of the MB implants with regard to polyethylene wear were not evident at a minimum 10-year follow-up.

  2. SIGMA Release v1.2 - Capabilities, Enhancements and Fixes

    Energy Technology Data Exchange (ETDEWEB)

    Mahadevan, Vijay [Argonne National Lab. (ANL), Argonne, IL (United States); Grindeanu, Iulian R. [Argonne National Lab. (ANL), Argonne, IL (United States); Ray, Navamita [Argonne National Lab. (ANL), Argonne, IL (United States); Jain, Rajeev [Argonne National Lab. (ANL), Argonne, IL (United States); Wu, Danqing [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-30

    In this report, we present details on SIGMA toolkit along with its component structure, capabilities, and feature additions in FY15, release cycles, and continuous integration process. These software processes along with updated documentation are imperative to successfully integrate and utilize in several applications including the SHARP coupled analysis toolkit for reactor core systems funded under the NEAMS DOE-NE program.

  3. SIGMA Release v1.2 - Capabilities, Enhancements and Fixes

    International Nuclear Information System (INIS)

    Mahadevan, Vijay; Grindeanu, Iulian R.; Ray, Navamita; Jain, Rajeev; Wu, Danqing

    2015-01-01

    In this report, we present details on SIGMA toolkit along with its component structure, capabilities, and feature additions in FY15, release cycles, and continuous integration process. These software processes along with updated documentation are imperative to successfully integrate and utilize in several applications including the SHARP coupled analysis toolkit for reactor core systems funded under the NEAMS DOE-NE program.

  4. One loop beta functions and fixed points in higher derivative sigma models

    International Nuclear Information System (INIS)

    Percacci, Roberto; Zanusso, Omar

    2010-01-01

    We calculate the one loop beta functions of nonlinear sigma models in four dimensions containing general two- and four-derivative terms. In the O(N) model there are four such terms and nontrivial fixed points exist for all N≥4. In the chiral SU(N) models there are in general six couplings, but only five for N=3 and four for N=2; we find fixed points only for N=2, 3. In the approximation considered, the four-derivative couplings are asymptotically free but the coupling in the two-derivative term has a nonzero limit. These results support the hypothesis that certain sigma models may be asymptotically safe.

  5. Long-term clinical outcomes and survivorship of press-fit condylar sigma fixed-bearing and mobile-bearing total knee prostheses in the same patients.

    Science.gov (United States)

    Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik; Kulkarni, Sourabh S; Kim, Yoon-Hong

    2014-10-01

    We are aware of no study that has compared press-fit condylar Sigma fixed-bearing and mobile-bearing total knee prostheses in the same patients after more than ten years of follow-up. The purpose of the current study was to compare these two implants with respect to the functional and radiographic results, prevalence of osteolysis, and overall revision rates at a mean of 12.1 years of follow-up. The study consisted of a consecutive series of 444 patients (mean age [and standard deviation], 66.5 ± 7.4 years) who underwent simultaneous bilateral total knee arthroplasty, with one side treated immediately after the other. All of the patients received a press-fit condylar Sigma mobile-bearing prosthesis on one side and a press-fit condylar Sigma fixed-bearing prosthesis on the contralateral side. The minimum duration of follow-up was ten years (mean, 12.1 years; range, ten to thirteen years). At the time of each follow-up visit, the patients were assessed clinically and radiographically. Postoperative total knee scores (95 and 94 points), Western Ontario and McMaster Universities Osteoarthritis Index (19 and 18 points), University of California, Los Angeles activity score (both prostheses, 5 points), range of motion (129° ± 6.3° and 127° ± 6.8°), and radiographic findings did not differ significantly between the press-fit condylar Sigma mobile and fixed-bearing designs at the final follow-up. The prevalence of aseptic loosening (1.4% and 1.8%) did not differ significantly between the mobile and fixed-bearing implant designs. No knee in either group had osteolysis. The estimated survival rate with revision as the end point was 98.2% (95% confidence interval, 91% to 99%) and 97.5% (95% confidence interval, 91% to 99%) at 12.1 years for the mobile and fixed-bearing implant groups, respectively. The results of the present long-term clinical study suggest that excellent clinical and radiographic results were achieved with both the press-fit condylar Sigma mobile and

  6. Design, scale-up, Six Sigma in processing different feedstocks in a fixed bed downdraft biomass gasifier

    Science.gov (United States)

    Boravelli, Sai Chandra Teja

    This thesis mainly focuses on design and process development of a downdraft biomass gasification processes. The objective is to develop a gasifier and process of gasification for a continuous steady state process. A lab scale downdraft gasifier was designed to develop the process and obtain optimum operating procedure. Sustainable and dependable sources such as biomass are potential sources of renewable energy and have a reasonable motivation to be used in developing a small scale energy production plant for countries such as Canada where wood stocks are more reliable sources than fossil fuels. This thesis addresses the process of thermal conversion of biomass gasification process in a downdraft reactor. Downdraft biomass gasifiers are relatively cheap and easy to operate because of their design. We constructed a simple biomass gasifier to study the steady state process for different sizes of the reactor. The experimental part of this investigation look at how operating conditions such as feed rate, air flow, the length of the bed, the vibration of the reactor, height and density of syngas flame in combustion flare changes for different sizes of the reactor. These experimental results also compare the trends of tar, char and syngas production for wood pellets in a steady state process. This study also includes biomass gasification process for different wood feedstocks. It compares how shape, size and moisture content of different feedstocks makes a difference in operating conditions for the gasification process. For this, Six Sigma DMAIC techniques were used to analyze and understand how each feedstock makes a significant impact on the process.

  7. 6 sigma quality performance

    International Nuclear Information System (INIS)

    Yu, Yeong Hak

    2000-03-01

    This deals with 6 sigma quality performance introducing company which has 6 sigma quality management, 6 sigma quality activity and customer, secret of success of 6 sigma quality management, what 6 sigma is, 6 sigma quality management propel system 5 propel steps of project like point of 6 sigma, flow of problem solution, tool for propel of project, performance of CTQ and total customer satisfaction, and quality management system and 6 sigma quality.

  8. The point of 6 sigma

    International Nuclear Information System (INIS)

    An, Yeong Jin

    2000-07-01

    This book gives descriptions of the point of 6 sigma. These are the titles of this : what 6 sigma is, sigma conception, motor roller 3.4 ppm, centering error, 6 sigma purpose, 6 sigma principle, eight steps of innovation strategy, 6 sigma innovation strategy of easy system step, measurement standard of 6 sigma outcome, the main role of 6 sigma, acknowledgment and reword, 6 sigma characteristic, 6 sigma effect, 6 sigma application and problems which happen when 6 sigma introduces.

  9. The SIGMA plants economic behavior

    International Nuclear Information System (INIS)

    Rivarola, Martin E.; Bergallo, Juan E.

    1999-01-01

    In this work, the economical behavior of the Uranium Enrichment Plants, built using the Gaseous Isotopic Separation using Advanced Methods (SIGMA) (Separacion Isotopica Gaseosa por Metodos Avanzados) technology is analyzed. The calculations were made using an integrated computer code, where the cost of each main component of the plant is estimated. The program computes the production cost for several configurations of enrichment cascades, each one corresponding to a production rate. The program also includes a numerical optimizer and it seeks the SIGMA optimal configuration for a given set of design parameters. The present work does not contemplate the model and calculation of the auxiliary system costs. The total amortization cost is obtained by using the cascade capital cost and assuming that the auxiliary system represents a fixed part of the total cost.The results obtained show that the SIGMA technology for Enrichment Uranium Plants could achieve economical competition in a much lower production scale than the conventional Gaseous Diffusion Enrichment Plants. (author)

  10. Topological massive sigma models

    International Nuclear Information System (INIS)

    Lambert, N.D.

    1995-01-01

    In this paper we construct topological sigma models which include a potential and are related to twisted massive supersymmetric sigma models. Contrary to a previous construction these models have no central charge and do not require the manifold to admit a Killing vector. We use the topological massive sigma model constructed here to simplify the calculation of the observables. Lastly it is noted that this model can be viewed as interpolating between topological massless sigma models and topological Landau-Ginzburg models. ((orig.))

  11. SIGMA without effort

    International Nuclear Information System (INIS)

    Hagedorn, R.; Reinfelds, J.

    1978-01-01

    SIGMA (System for Interactive Graphical Analysis) is an interactive computing language with automatic array handling and graphical facilities. It is designed as a tool for mathematical problem solving. The SIGMA language is simple, almost obvious, yet flexible and powerful. This tutorial introduces the beginner to SIGMA. It is supposed to be used at a graphics terminal having access to SIGMA. The user will learn the language in dialogue with the system in sixteen sessions of about one hour. The first session enables him already to compute and display functions of one or two variables. (Auth.)

  12. Six Sigma software development

    CERN Document Server

    Tayntor, Christine B

    2002-01-01

    Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

  13. Clinical Outcome of Medial Pivot Compared With Press-Fit Condylar Sigma Cruciate-Retaining Mobile-Bearing Total Knee Arthroplasty.

    Science.gov (United States)

    Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik

    2017-10-01

    The purpose of this study was to compare the long-term clinical results, radiographic results, range of knee motion, patient satisfaction, and the survival rate of Medial-Pivot posterior cruciate-substituting, knee prosthesis and a press-fit condylar (PFC) Sigma cruciate-retaining mobile-bearing knee prosthesis in the same patients. One hundred eighty-two patients received Medial-Pivot knee prosthesis in one knee and a PFC Sigma knee prosthesis in the contralateral knee. The minimum duration of follow-up was 11 years (range, 11-12.6 years). The knees with a Medial-Pivot knee prosthesis had significantly worse results than those with a PFC Sigma knee prosthesis at the final follow-up with regard to the mean postoperative Knee Society knee scores (90 compared with 95 points), Western Ontario and McMaster Universities Osteoarthritis Index score (25 compared with 18 points), and range of knee motion (117° compared with 128°). Patients were more satisfied with PFC Sigma knee prosthesis (93%) than with Medial-Pivot knee prosthesis (75%). Complication rates were significantly higher in the Medial-Pivot knee group (26%) than those in the PFC Sigma knee group (6.5%). Radiographic results and survival rates (99% compared with 99.5%) were similar between the 2 groups. Although the long-term fixation and survival rate of both Medial-Pivot and PFC Sigma prostheses were similar, we observed a worse knee score, worse range of knee motion, and patient satisfaction was less in the Medial-Pivot knee group than in the PFC Sigma knee group. Furthermore, complication rate was also higher in the Medial-Pivot knee group than the other group. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Six Sigma in Education

    Science.gov (United States)

    LeMahieu, Paul G.; Nordstrum, Lee E.; Cudney, Elizabeth A.

    2017-01-01

    Purpose: This paper is one of seven in this volume that aims to elaborate different approaches to quality improvement in education. It delineates a methodology called Six Sigma. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study demonstrating an application of Six Sigma in a…

  15. Investigation of stormwater quality improvements utilizing permeable friction course (PFC).

    Science.gov (United States)

    2010-09-01

    This report describes research into the water quality and hydraulics of the Permeable Friction Course (PFC). : Water quality monitoring of 3 locations in the Austin area indicates up to a 90 percent reduction in pollutant : discharges from PFC compar...

  16. Development of filtration equipment to reuse PFC decontamination wastewater

    International Nuclear Information System (INIS)

    Kim, Gye Nam; Lee, Sung Yeol; Won, Hui Jun; Jung Chong Hun; Oh, Won Zin; Park, Jin Ho

    2005-01-01

    When PFC(Perfluorocarbonate) decontamination technology is applied to removal of radioactive contaminated particulate adhered at surface during the operation of nuclear research facilities, it is necessary to develop a filtration equipment to reuse of PFC solution due to high price, also to minimize the volume of second wastewater. Contaminated characteristics of hot particulate was investigated and a filtration process was presented to remove suspended radioactive particulate from PFC decontamination wastewater generated on PFC decontamination

  17. Perfluorocarbon (PFC) emulsions as potential drug carriers

    International Nuclear Information System (INIS)

    Yuhas, J.M.; Goodman, R.L.; Moore, R.E.

    1984-01-01

    PFC emulsions have excellent oxygen transporting properties and have been reported to enhance the response of murine tumors to both radiation and BCNU. While the presently available emulsions are far too toxic to the immune system to be used in cancer therapy, they can be used to investigate the overall potential of this approach. As an example, the authors have found that these emulsions can alter drug availability. The lipophilicity of both the PFC and the drug in question determine the partitioning of the drug between the organic and aqueous phases of an emulsion. In vitro, this can reduce drug effectiveness by reducing the amount of drug available to the cells. In vivo, however, this partitioning may produce sustained drug exposure, which could be of benefit in cancer therapy and other applications. In brief, as the drug is absorbed from the circulating aqueous phase, additional drug would leach from the PFC, thereby providing a sustained drug exposure similar to that obtained with liposomes. While a great deal more work will be required to evaluate the practicality of this approach, the existence of this phenomenon must be taken into account in both the design and interpretation of efficacy studies in which anesthetics, chemotherapeutics, etc are employed

  18. Narrow Sigma -hypernuclear states

    CERN Document Server

    Gal, A

    1980-01-01

    It is shown that the spin-isospin dependence of low-energy Sigma N to Lambda N conversion leads to substantial quenching of nuclear-matter estimates of the widths of some Sigma -hypernuclear states produced in (K/sup -/, pi ) reactions, to a level below 10 MeV. The estimated widths compare favorably with those of the Sigma -hypernuclear peaks recently observed at CERN for /sup 7/Li, /sup 9/Be, and /sup 12/C. Tentative quantum number assignments are suggested for these states. (10 refs).

  19. The separation of particulate within PFC decontamination wastewater generated by PFC decontamination

    International Nuclear Information System (INIS)

    Kim, Gye Nam; Lee, Sung Yeol; Won, Hui Jun; Jung, Chong Hun; Oh, Won Zin; Park, Jin Ho; Narayan, M.

    2005-01-01

    When PFC(Perfluoro carbonate) decontamination technology is applied to removal of radioactive contaminated particulate adhered at surface during the operation of nuclear research facilities, it is necessary to develop a filtration equipment to reuse of PFC solution due to high price, also to minimize the volume of second wastewater. Contaminated characteristics of hot particulate was investigated and a filtration process was presented to remove suspended radioactive particulate from PFC decontamination wastewater generated on PFC decontamination. The range of size of hot particulate adhered at the surface of research facilities measured by SEM was 0.1∼10μm. Hot particulate of more than 2μm in PFC contamination wastewater was removed by first filter and then hot particulate of more than 0.2μm was removed by second filter. Results of filter experiments showed that filtration efficiency of PVDF(Poly vinylidene fluoride), PP(Polypropylene), Ceramic filter was 95∼97%. A ceramic filter showed a higher filtration efficiency with a little low permeate volume. Also, a ceramic of inorganic compound could be broken easily on experiment and has a high price but was highly stable at radioactivity in comparison of PVDF and PP of a macromolecule which generate H 2 gas in alpha radioactivity environment

  20. Supersymmetric sigma models

    International Nuclear Information System (INIS)

    Bagger, J.A.

    1984-09-01

    We begin to construct the most general supersymmetric Lagrangians in one, two and four dimensions. We find that the matter couplings have a natural interpretation in the language of the nonlinear sigma model

  1. Supersymmetric sigma models

    Energy Technology Data Exchange (ETDEWEB)

    Bagger, J.A.

    1984-09-01

    We begin to construct the most general supersymmetric Lagrangians in one, two and four dimensions. We find that the matter couplings have a natural interpretation in the language of the nonlinear sigma model.

  2. SIGMA Experimental Facility; Facilidad Experimental SIGMA

    Energy Technology Data Exchange (ETDEWEB)

    Rivarola, Martin; Florido, Pablo; Gonzalez, Jose; Brasnarof, Daniel; Orellano, Pablo; Bergallo, Juan [Comision Nacional de Energia Atomica, Centro Atomico Bariloche, Grupo de Disenos Avanzados y Evaluacion Economica, Complejo Tecnologico Pilcaniyeu (Argentina)

    2000-07-01

    The SIGMA ( Separacion Isotopica Gaseosa por Metodos Avanzados) concept is outlined.The old gaseous diffusion process to enrich uranium has been updated to be economically competitive for small production volumes.Major innovations have been introduced in the membrane design and in the integrated design of compressors and diffusers.The use of injectors and gas turbines has been also adopted.The paper describes the demonstration facility installed by the Argentine Atomic Energy Commission.

  3. 6 Sigma project advance

    International Nuclear Information System (INIS)

    2002-12-01

    This book deals with 6 sigma project advance which introduces 6 sigma project in Changwon special steel, how is failure accepted? CTQ selection which is starting line, definition of performance standard, measurement system check on reliability of measurement data, check of process capacity for current level, establishment of target, optimal design and performance of application, practice of management system for maintain of improved result, CTQ selection, check of measurement system and practice of management system.

  4. Sigma models on supercosets

    Energy Technology Data Exchange (ETDEWEB)

    Mitev, Vladimir

    2010-08-15

    The purpose of this thesis is to deepen our understanding of the fundamental properties and defining features of non-linear sigma models on superspaces. We begin by presenting the major concepts that we have used in our investigation, namely Lie superalgebras and supergroups, non-linear sigma models and two dimensional conformal field theory. We then exhibit a method, called cohomological reduction, that makes use of the target space supersymmetry of non-linear sigma models to compute certain correlation functions. We then show how the target space supersymmetry of Ricci flat Lie supergroups simplifies the perturbation theory of suitable deformed Wess-Zumino-Witten models, making it possible to compute boundary conformal weights to all orders. This is then applied to the OSP (2S+2 vertical stroke 2S) Gross-Neveu Model, leading to a dual description in terms of the sigma model on the supersphere S{sup 2S+1} {sup vertical} {sup stroke} {sup 2S}. With this results in mind, we then turn to the similar, yet more intricate, theory of the non-linear sigma model on the complex projective superspaces CP{sup N-1} {sup vertical} {sup stroke} {sup N}. The cohomological reduction allows us to compute several important quantities non-perturbatively with the help of the system of symplectic fermions. Combining this with partial perturbative results for the whole theory, together with numerical computations, we propose a conjecture for the exact evolution of boundary conformal weights for symmetry preserving boundary conditions. (orig.)

  5. Sigma models on supercosets

    International Nuclear Information System (INIS)

    Mitev, Vladimir

    2010-08-01

    The purpose of this thesis is to deepen our understanding of the fundamental properties and defining features of non-linear sigma models on superspaces. We begin by presenting the major concepts that we have used in our investigation, namely Lie superalgebras and supergroups, non-linear sigma models and two dimensional conformal field theory. We then exhibit a method, called cohomological reduction, that makes use of the target space supersymmetry of non-linear sigma models to compute certain correlation functions. We then show how the target space supersymmetry of Ricci flat Lie supergroups simplifies the perturbation theory of suitable deformed Wess-Zumino-Witten models, making it possible to compute boundary conformal weights to all orders. This is then applied to the OSP (2S+2 vertical stroke 2S) Gross-Neveu Model, leading to a dual description in terms of the sigma model on the supersphere S 2S+1 vertical stroke 2S . With this results in mind, we then turn to the similar, yet more intricate, theory of the non-linear sigma model on the complex projective superspaces CP N-1 vertical stroke N . The cohomological reduction allows us to compute several important quantities non-perturbatively with the help of the system of symplectic fermions. Combining this with partial perturbative results for the whole theory, together with numerical computations, we propose a conjecture for the exact evolution of boundary conformal weights for symmetry preserving boundary conditions. (orig.)

  6. Inclusive $\\Sigma^{+}$ and $\\Sigma^{0}$ Production in Hadronic Z Decays

    CERN Document Server

    Acciarri, M.; Adriani, O.; Aguilar-Benitez, M.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alviggi, M.G.; Ambrosi, G.; Anderhub, H.; Andreev, Valery P.; Angelescu, T.; Anselmo, F.; Arefev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Bajo, A.; Baksay, L.; Balandras, A.; Banerjee, S.; Banerjee, Sw.; Barczyk, A.; Barillere, R.; Barone, L.; Bartalini, P.; Basile, M.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Bellucci, L.; Berbeco, R.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B.L.; Bhattacharya, S.; Biasini, M.; Biland, A.; Blaising, J.J.; Blyth, S.C.; Bobbink, G.J.; Bohm, A.; Boldizsar, L.; Borgia, B.; Bourilkov, D.; Bourquin, M.; Braccini, S.; Branson, J.G.; Brigljevic, V.; Brochu, F.; Buffini, A.; Buijs, A.; Burger, J.D.; Burger, W.J.; Cai, X.D.; Campanelli, Mario; Capell, M.; Cara Romeo, G.; Carlino, G.; Cartacci, A.M.; Casaus, J.; Castellini, G.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Cesaroni, F.; Chamizo, M.; Chang, Y.H.; Chaturvedi, U.K.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G.M.; Chen, H.F.; Chen, H.S.; Chiefari, G.; Cifarelli, L.; Cindolo, F.; Civinini, C.; Clare, I.; Clare, R.; Coignet, G.; Colijn, A.P.; Colino, N.; Costantini, S.; Cotorobai, F.; Cozzoni, B.; de la Cruz, B.; Csilling, A.; Cucciarelli, S.; Dai, T.S.; van Dalen, J.A.; D'Alessandro, R.; de Asmundis, R.; Deglon, P.; Degre, A.; Deiters, K.; della Volpe, D.; Denes, P.; DeNotaristefani, F.; De Salvo, A.; Diemoz, M.; van Dierendonck, D.; Di Lodovico, F.; Dionisi, C.; Dittmar, M.; Dominguez, A.; Doria, A.; Dova, M.T.; Duchesneau, D.; Dufournaud, D.; Duinker, P.; Duran, I.; El Mamouni, H.; Engler, A.; Eppling, F.J.; Erne, F.C.; Extermann, P.; Fabre, M.; Faccini, R.; Falagan, M.A.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Ferguson, T.; Ferroni, F.; Fesefeldt, H.; Fiandrini, E.; Field, J.H.; Filthaut, F.; Fisher, P.H.; Fisk, I.; Forconi, G.; Fredj, L.; Freudenreich, K.; Furetta, C.; Galaktionov, Iouri; Ganguli, S.N.; Garcia-Abia, Pablo; Gataullin, M.; Gau, S.S.; Gentile, S.; Gheordanescu, N.; Giagu, S.; Gong, Z.F.; Grenier, Gerald Jean; Grimm, O.; Gruenewald, M.W.; Guida, M.; van Gulik, R.; Gupta, V.K.; Gurtu, A.; Gutay, L.J.; Haas, D.; Hasan, A.; Hatzifotiadou, D.; Hebbeker, T.; Herve, Alain; Hidas, P.; Hirschfelder, J.; Hofer, H.; Holzner, G.; Hoorani, H.; Hou, S.R.; Hu, Y.; Iashvili, I.; Jin, B.N.; Jones, Lawrence W.; de Jong, P.; Josa-Mutuberria, I.; Khan, R.A.; Kaur, M.; Kienzle-Focacci, M.N.; Kim, D.; Kim, J.K.; Kirkby, Jasper; Kiss, D.; Kittel, W.; Klimentov, A.; Konig, A.C.; Kopp, A.; Koutsenko, V.; Kraber, M.; Kraemer, R.W.; Krenz, W.; Kruger, A.; Kunin, A.; Ladron Ladron de Guevara, P.; Laktineh, I.; Landi, G.; Lassila-Perini, K.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Lee, H.J.; Le Goff, J.M.; Leiste, R.; Leonardi, Emanuele; Levtchenko, P.; Li, C.; Likhoded, S.; Lin, C.H.; Lin, W.T.; Linde, F.L.; Lista, L.; Liu, Z.A.; Lohmann, W.; Longo, E.; Lu, Y.S.; Lubelsmeyer, K.; Luci, C.; Luckey, David; Lugnier, L.; Luminari, L.; Lustermann, W.; Ma, W.G.; Maity, M.; Malgeri, L.; Malinin, A.; Mana, C.; Mangeol, D.; Mans, J.; Marchesini, P.; Marian, G.; Martin, J.P.; Marzano, F.; Massaro, G.G.G.; Mazumdar, K.; McNeil, R.R.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W.J.; von der Mey, M.; Mihul, A.; Milcent, H.; Mirabelli, G.; Mnich, J.; Mohanty, G.B.; Molnar, P.; Monteleoni, B.; Moulik, T.; Muanza, G.S.; Muheim, F.; Muijs, A.J.M.; Musy, M.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Niessen, T.; Nisati, A.; Kluge, Hannelies; Organtini, G.; Oulianov, A.; Palomares, C.; Pandoulas, D.; Paoletti, S.; Paolucci, P.; Paramatti, R.; Park, H.K.; Park, I.H.; Pascale, G.; Passaleva, G.; Patricelli, S.; Paul, Thomas Cantzon; Pauluzzi, M.; Paus, C.; Pauss, F.; Pedace, M.; Pensotti, S.; Perret-Gallix, D.; Petersen, B.; Piccolo, D.; Pierella, F.; Pieri, M.; Piroue, P.A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Postema, H.; Pothier, J.; Produit, N.; Prokofev, D.O.; Prokofev, D.; Quartieri, J.; Rahal-Callot, G.; Rahaman, M.A.; Raics, P.; Raja, N.; Ramelli, R.; Rancoita, P.G.; Raspereza, A.; Raven, G.; Razis, P.; Ren, D.; Rescigno, M.; Reucroft, S.; van Rhee, T.; Riemann, S.; Riles, Keith; Robohm, A.; Rodin, J.; Roe, B.P.; Romero, L.; Rosca, A.; Rosier-Lees, S.; Rubio, J.A.; Ruschmeier, D.; Rykaczewski, H.; Saremi, S.; Sarkar, S.; Salicio, J.; Sanchez, E.; Sanders, M.P.; Sarakinos, M.E.; Schafer, C.; Schegelsky, V.; Schmidt-Kaerst, S.; Schmitz, D.; Schopper, H.; Schotanus, D.J.; Schwering, G.; Sciacca, C.; Sciarrino, D.; Seganti, A.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shumilov, E.; Shvorob, A.; Siedenburg, T.; Son, D.; Smith, B.; Spillantini, P.; Steuer, M.; Stickland, D.P.; Stone, A.; Stone, H.; Stoyanov, B.; Straessner, A.; Sudhakar, K.; Sultanov, G.; Sun, L.Z.; Suter, H.; Swain, J.D.; Szillasi, Z.; Sztaricskai, T.; Tang, X.W.; Tauscher, L.; Taylor, L.; Tellili, B.; Timmermans, Charles; Ting, Samuel C.C.; Ting, S.M.; Tonwar, S.C.; Toth, J.; Tully, C.; Tung, K.L.; Uchida, Y.; Ulbricht, J.; Valente, E.; Vesztergombi, G.; Vetlitsky, I.; Vicinanza, D.; Viertel, G.; Villa, S.; Vivargent, M.; Vlachos, S.; Vodopianov, I.; Vogel, H.; Vogt, H.; Vorobev, I.; Vorobov, A.A.; Vorvolakos, A.; Wadhwa, M.; Wallraff, W.; Wang, M.; Wang, X.L.; Wang, Z.M.; Weber, A.; Weber, M.; Wienemann, P.; Wilkens, H.; Wu, S.X.; Wynhoff, S.; Xia, L.; Xu, Z.Z.; Yamamoto, J.; Yang, B.Z.; Yang, C.G.; Yang, H.J.; Yang, M.; Ye, J.B.; Yeh, S.C.; Zalite, A.; Zalite, Yu.; Zhang, Z.P.; Zhu, G.Y.; Zhu, R.Y.; Zichichi, A.; Zilizi, G.; Zoller, M.

    2000-01-01

    We report on measurements of the inclusive production rate of $\\Sigma^+$ and $\\Sigma^0$ baryons in hadronic Z decays collected with the L3 detector at LEP. The $\\Sigma^+$ baryons are detected through the decay $\\Sigma^+ \\rightarrow {\\rm p} \\pi^0$, while the $\\Sigma^0$ baryons are detected via the decay mode $\\Sigma^0 \\rightarrow \\Lambda \\gamma$. The average numbers of $\\Sigma^+$ and $\\Sigma^0$ per hadronic Z decay are measured to be: \\begin{eqnarray*} \\left + \\left & = & 0.114 \\pm 0.011_{\\mbox{\\it \\small stat}} \\pm 0.009_{\\mbox{\\it \\small syst}} \\\\ \\left + \\left & = & 0.095 \\pm 0.015_{\\mbox{\\it \\small stat}} \\pm 0.013_{\\mbox{\\it \\small syst}} \\ \\mbox{.} \\end{eqnarray*} These rates are found to be higher than the predictions from Monte Carlo hadronization models and analytical parameterizations of strange baryon production.

  7. Six Sigma method

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Mast, J.; Balakrishnan, N.; Brandimarte, P.; Everitt, B.; Molenberghs, G.; Piegorsch, W.; Ruggeri, F.

    2015-01-01

    Six Sigma is built on principles and methods that have proven themselves over the twentieth century. It has incorporated the most effective approaches and integrated them into a full program. It offers a management structure for organizing continuous improvement of routine tasks, such as

  8. Power factor correction (PFC) converters feeding brushless DC ...

    African Journals Online (AJOL)

    This paper presents a comprehensive study of power factor correction (PFC) converters for feeding brushless DC (BLDC) motor drive. This work explores various configurations of PFC converters which are classified into five different categories of non-isolated, bridgeless (BL) non-isolated, isolated, BL-isolated PFC ...

  9. DESIGN FOR SIX SIGMA

    Directory of Open Access Journals (Sweden)

    Liem Ferryanto

    2007-01-01

    Full Text Available This article provides a step by step process of executing analytical or computer based Design for Six Sigma using a Sliding Door project as an example. It comprises of identification of Voice Of the Customer (VOC, transformation of VOC to what it is called Critical To Quality characteristics (CTQs, modeling of system transfers function, optimal and robust solutions, and tolerance design approach

  10. SIGMA Experimental Facility

    International Nuclear Information System (INIS)

    Rivarola, Martin; Florido, Pablo; Gonzalez, Jose; Brasnarof, Daniel; Orellano, Pablo; Bergallo, Juan

    2000-01-01

    The SIGMA ( Separacion Isotopica Gaseosa por Metodos Avanzados) concept is outlined.The old gaseous diffusion process to enrich uranium has been updated to be economically competitive for small production volumes.Major innovations have been introduced in the membrane design and in the integrated design of compressors and diffusers.The use of injectors and gas turbines has been also adopted.The paper describes the demonstration facility installed by the Argentine Atomic Energy Commission

  11. PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA).

    Science.gov (United States)

    Oliaei, Fardin; Kriens, Don; Weber, Roland; Watson, Alan

    2013-04-01

    Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS-including production sites and sites where PFOS wastes have been deposited-in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve-with highlighted improvements-as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.

  12. High Efficiency PFC Frontend for Class-D Amplifiers

    DEFF Research Database (Denmark)

    Li, Qingnan; Frium, Mads P.

    2012-01-01

    This thesis investigates the design of high eciency Power Factor Correction (PFC) converter for Class-D amplier at universal line and 3.5kW power range. The work starts with an overview on dierent high eciency Bridgeless PFC topologies and investigates their applicability with respect to the given...... speci- cations in Chapter 1. Based on the conclusions of Chapter 2, the single-phase Two-Boost-Circuit Bridgeless PFC converter topology is considered the most promising to start with regarding the achievable converter eciency and the EMI performances.The subsequent Chapters discuss the method...

  13. Physicochemical characteristics of PFC surfactants for dry decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Jin; Lee, Chi Woo [Korea University, Seoul (Korea)

    2001-04-01

    Even the trace amount of the used nuclear fuels of high radioactivity are hazardous to the earth and humans. Perfluorocarbons and perfluorocarbon surfactants are emerging to be efficient chemicals in the dry decontamination process of the used fuels of high radioactivity. The theme was undertaken to increase the knowledge on perfluorocarbon surfactants to develop the perfluorocarbon system in the dry decontamination process in Korea. Several cationic and anionic pfc surfactants were synthesized. Effects of pfc surfactants on electrochemical etching of silicon were investigated to form porous silicons. Forces were measured between silicon surfaces and AFM tip in the absence and presence of pfc surfactants. 7 refs., 10 figs. (Author)

  14. Sigma-convergence of stationary Navier-Stokes type equations

    Directory of Open Access Journals (Sweden)

    Gabriel Nguetseng

    2009-06-01

    Full Text Available In the framework of homogenization theory, the Sigma-convergence method is carried out on stationary Navier-Stokes type equations on a fixed domain. Our main tools are the two-scale convergence concept and the so-called homogenization algebras.

  15. Power factor correction (PFC) converters feeding brushless DC ...

    African Journals Online (AJOL)

    DR OKE

    1Department of Electrical Engineering, Indian Institute of Technology Delhi, INDIA ... Hence, power factor correction (PFC) converters are used for achieving a unity ...... He is currently working as a Systems Engineer (Power IC) in AvantGarde ...

  16. Sigma beta decay

    International Nuclear Information System (INIS)

    Newman, D.E.

    1975-01-01

    Describes an experiment to measure beta decays of the sigma particle. Sigmas produced by stopping a K - beam in a liquid hydrogen target decayed in the following reactions: Kp → Σπ; Σ → Neν. The electron and pion were detected by wire spark chambers in a magnetic spectrometer and by plastic scintillators, and were differentiated by a threshold gas Cherenkov counter. The neutron was detected by liquid scintillation counters. The data (n = 3) shell electrons or the highly excited electrons decay first. Instead, it is suggested that when there are two to five electrons in highly excited states immediately after a heavy ion--atom collision the first transitions to occur will be among highly excited Rydberg states in a cascade down to the 4s, 4p, and 3d-subshells. If one of the long lived states becomes occupied by electrons promoted during the collision or by electrons falling from higher levels, it will not decay until after the valence shell decays. LMM rates calculated to test the methods used are compared to previous works. The mixing coefficients are given in terms of the states 4s4p, 45sp+-, and 5s5p. The applicability of Cooper, Fano, and Prats' discussion of the energies and transition rates of doubly excited states is considered

  17. Study of the critical behavior of the O(N) linear and nonlinear sigma models

    International Nuclear Information System (INIS)

    Graziani, F.R.

    1983-01-01

    A study of the large N behavior of both the O(N) linear and nonlinear sigma models is presented. The purpose is to investigate the relationship between the disordered (ordered) phase of the linear and nonlinear sigma models. Utilizing operator product expansions and stability analyses, it is shown that for 2 - (lambda/sub R/(M) is the dimensionless renormalized quartic coupling and lambda* is the IR fixed point) limit of the linear sigma model which yields the nonlinear sigma model. It is also shown that stable large N linear sigma models with lambda 0) and nonlinear models are trivial. This result (i.e., triviality) is well known but only for one and two component models. Interestingly enough, the lambda< d = 4 linear sigma model remains nontrivial and tachyonic free

  18. Observation of the Heavy Baryons Sigma b and Sigma b*.

    Science.gov (United States)

    Aaltonen, T; Abulencia, A; Adelman, J; Affolder, T; Akimoto, T; Albrow, M G; Amerio, S; Amidei, D; Anastassov, A; Anikeev, K; Annovi, A; Antos, J; Aoki, M; Apollinari, G; Arisawa, T; Artikov, A; Ashmanskas, W; Attal, A; Aurisano, A; Azfar, F; Azzi-Bacchetta, P; Azzurri, P; Bacchetta, N; Badgett, W; Barbaro-Galtieri, A; Barnes, V E; Barnett, B A; Baroiant, S; Bartsch, V; Bauer, G; Beauchemin, P-H; Bedeschi, F; Behari, S; Bellettini, G; Bellinger, J; Belloni, A; Benjamin, D; Beretvas, A; Beringer, J; Berry, T; Bhatti, A; Binkley, M; Bisello, D; Bizjak, I; Blair, R E; Blocker, C; Blumenfeld, B; Bocci, A; Bodek, A; Boisvert, V; Bolla, G; Bolshov, A; Bortoletto, D; Boudreau, J; Boveia, A; Brau, B; Brigliadori, L; Bromberg, C; Brubaker, E; Budagov, J; Budd, H S; Budd, S; Burkett, K; Busetto, G; Bussey, P; Buzatu, A; Byrum, K L; Cabrera, S; Campanelli, M; Campbell, M; Canelli, F; Canepa, A; Carillo, S; Carlsmith, D; Carosi, R; Carron, S; Casal, B; Casarsa, M; Castro, A; Catastini, P; Cauz, D; Cavalli-Sforza, M; Cerri, A; Cerrito, L; Chang, S H; Chen, Y C; Chertok, M; Chiarelli, G; Chlachidze, G; Chlebana, F; Cho, I; Cho, K; Chokheli, D; Chou, J P; Choudalakis, G; Chuang, S H; Chung, K; Chung, W H; Chung, Y S; Cilijak, M; Ciobanu, C I; Ciocci, M A; Clark, A; Clark, D; Coca, M; Compostella, G; Convery, M E; Conway, J; Cooper, B; Copic, K; Cordelli, M; Cortiana, G; Crescioli, F; Cuenca Almenar, C; Cuevas, J; Culbertson, R; Cully, J C; DaRonco, S; Datta, M; D'Auria, S; Davies, T; Dagenhart, D; de Barbaro, P; De Cecco, S; Deisher, A; De Lentdecker, G; De Lorenzo, G; Dell'Orso, M; Delli Paoli, F; Demortier, L; Deng, J; Deninno, M; De Pedis, D; Derwent, P F; Di Giovanni, G P; Dionisi, C; Di Ruzza, B; Dittmann, J R; D'Onofrio, M; Dörr, C; Donati, S; Dong, P; Donini, J; Dorigo, T; Dube, S; Efron, J; Erbacher, R; Errede, D; Errede, S; Eusebi, R; Fang, H C; Farrington, S; Fedorko, I; Fedorko, W T; Feild, R G; Feindt, M; Fernandez, J P; Field, R; Flanagan, G; Forrest, R; Forrester, S; Franklin, M; Freeman, J C; Furic, I; Gallinaro, M; Galyardt, J; Garcia, J E; Garberson, F; Garfinkel, A F; Gay, C; Gerberich, H; Gerdes, D; Giagu, S; Giannetti, P; Gibson, K; Gimmell, J L; Ginsburg, C; Giokaris, N; Giordani, M; Giromini, P; Giunta, M; Giurgiu, G; Glagolev, V; Glenzinski, D; Gold, M; Goldschmidt, N; Goldstein, J; Golossanov, A; Gomez, G; Gomez-Ceballos, G; Goncharov, M; González, O; Gorelov, I; Goshaw, A T; Goulianos, K; Gresele, A; Grinstein, S; Grosso-Pilcher, C; Grundler, U; Guimaraes da Costa, J; Gunay-Unalan, Z; Haber, C; Hahn, K; Hahn, S R; Halkiadakis, E; Hamilton, A; Han, B-Y; Han, J Y; Handler, R; Happacher, F; Hara, K; Hare, D; Hare, M; Harper, S; Harr, R F; Harris, R M; Hartz, M; Hatakeyama, K; Hauser, J; Hays, C; Heck, M; Heijboer, A; Heinemann, B; Heinrich, J; Henderson, C; Herndon, M; Heuser, J; Hidas, D; Hill, C S; Hirschbuehl, D; Hocker, A; Holloway, A; Hou, S; Houlden, M; Hsu, S-C; Huffman, B T; Hughes, R E; Husemann, U; Huston, J; Incandela, J; Introzzi, G; Iori, M; Ivanov, A; Iyutin, B; James, E; Jang, D; Jayatilaka, B; Jeans, D; Jeon, E J; Jindariani, S; Johnson, W; Jones, M; Joo, K K; Jun, S Y; Jung, J E; Junk, T R; Kamon, T; Karchin, P E; Kato, Y; Kemp, Y; Kephart, R; Kerzel, U; Khotilovich, V; Kilminster, B; Kim, D H; Kim, H S; Kim, J E; Kim, M J; Kim, S B; Kim, S H; Kim, Y K; Kimura, N; Kirsch, L; Klimenko, S; Klute, M; Knuteson, B; Ko, B R; Kondo, K; Kong, D J; Konigsberg, J; Korytov, A; Kotwal, A V; Kraan, A C; Kraus, J; Kreps, M; Kroll, J; Krumnack, N; Kruse, M; Krutelyov, V; Kubo, T; Kuhlmann, S E; Kuhr, T; Kulkarni, N P; Kusakabe, Y; Kwang, S; Laasanen, A T; Lai, S; Lami, S; Lammel, S; Lancaster, M; Lander, R L; Lannon, K; Lath, A; Latino, G; Lazzizzera, I; LeCompte, T; Lee, J; Lee, J; Lee, Y J; Lee, S W; Lefèvre, R; Leonardo, N; Leone, S; Levy, S; Lewis, J D; Lin, C; Lin, C S; Lindgren, M; Lipeles, E; Lister, A; Litvintsev, D O; Liu, T; Lockyer, N S; Loginov, A; Loreti, M; Lu, R-S; Lucchesi, D; Lujan, P; Lukens, P; Lungu, G; Lyons, L; Lys, J; Lysak, R; Lytken, E; Mack, P; MacQueen, D; Madrak, R; Maeshima, K; Makhoul, K; Maki, T; Maksimovic, P; Malde, S; Malik, S; Manca, G; Manousakis, A; Margaroli, F; Marginean, R; Marino, C; Marino, C P; Martin, A; Martin, M; Martin, V; Martínez, M; Martínez-Ballarín, R; Maruyama, T; Mastrandrea, P; Masubuchi, T; Matsunaga, H; Mattson, M E; Mazini, R; Mazzanti, P; McFarland, K S; McIntyre, P; McNulty, R; Mehta, A; Mehtala, P; Menzemer, S; Menzione, A; Merkel, P; Mesropian, C; Messina, A; Miao, T; Miladinovic, N; Miles, J; Miller, R; Mills, C; Milnik, M; Mitra, A; Mitselmakher, G; Miyamoto, A; Moed, S; Moggi, N; Mohr, B; Moon, C S; Moore, R; Morello, M; Movilla Fernandez, P; Mülmenstädt, J; Mukherjee, A; Muller, Th; Mumford, R; Murat, P; Mussini, M; Nachtman, J; Nagano, A; Naganoma, J; Nakamura, K; Nakano, I; Napier, A; Necula, V; Neu, C; Neubauer, M S; Nielsen, J; Nodulman, L; Norniella, O; Nurse, E; Oh, S H; Oh, Y D; Oksuzian, I; Okusawa, T; Oldeman, R; Orava, R; Osterberg, K; Pagliarone, C; Palencia, E; Papadimitriou, V; Papaikonomou, A; Paramonov, A A; Parks, B; Pashapour, S; Patrick, J; Pauletta, G; Paulini, M; Paus, C; Pellett, D E; Penzo, A; Phillips, T J; Piacentino, G; Piedra, J; Pinera, L; Pitts, K; Plager, C; Pondrom, L; Portell, X; Poukhov, O; Pounder, N; Prakoshyn, F; Pronko, A; Proudfoot, J; Ptohos, F; Punzi, G; Pursley, J; Rademacker, J; Rahaman, A; Ramakrishnan, V; Ranjan, N; Redondo, I; Reisert, B; Rekovic, V; Renton, P; Rescigno, M; Richter, S; Rimondi, F; Ristori, L; Robson, A; Rodrigo, T; Rogers, E; Rolli, S; Roser, R; Rossi, M; Rossin, R; Roy, P; Ruiz, A; Russ, J; Rusu, V; Saarikko, H; Safonov, A; Sakumoto, W K; Salamanna, G; Saltó, O; Santi, L; Sarkar, S; Sartori, L; Sato, K; Savard, P; Savoy-Navarro, A; Scheidle, T; Schlabach, P; Schmidt, E E; Schmidt, M A; Schmidt, M P; Schmitt, M; Schwarz, T; Scodellaro, L; Scott, A L; Scribano, A; Scuri, F; Sedov, A; Seidel, S; Seiya, Y; Semenov, A; Sexton-Kennedy, L; Sfyrla, A; Shalhout, S Z; Shapiro, M D; Shears, T; Shepard, P F; Sherman, D; Shimojima, M; Shochet, M; Shon, Y; Shreyber, I; Sidoti, A; Sinervo, P; Sisakyan, A; Slaughter, A J; Slaunwhite, J; Sliwa, K; Smith, J R; Snider, F D; Snihur, R; Soderberg, M; Soha, A; Somalwar, S; Sorin, V; Spalding, J; Spinella, F; Spreitzer, T; Squillacioti, P; Stanitzki, M; Staveris-Polykalas, A; St Denis, R; Stelzer, B; Stelzer-Chilton, O; Stentz, D; Strologas, J; Stuart, D; Suh, J S; Sukhanov, A; Sun, H; Suslov, I; Suzuki, T; Taffard, A; Takashima, R; Takeuchi, Y; Tanaka, R; Tecchio, M; Teng, P K; Terashi, K; Tesarek, R J; Thom, J; Thompson, A S; Thomson, E; Tipton, P; Tiwari, V; Tkaczyk, S; Toback, D; Tokar, S; Tollefson, K; Tomura, T; Tonelli, D; Torre, S; Torretta, D; Tourneur, S; Trischuk, W; Tsuno, S; Tu, Y; Turini, N; Ukegawa, F; Uozumi, S; Vallecorsa, S; van Remortel, N; Varganov, A; Vataga, E; Vazquez, F; Velev, G; Vellidis, C; Veramendi, G; Veszpremi, V; Vidal, M; Vidal, R; Vila, I; Vilar, R; Vine, T; Vogel, M; Vollrath, I; Volobouev, I; Volpi, G; Würthwein, F; Wagner, P; Wagner, R G; Wagner, R L; Wagner, J; Wagner, W; Wallny, R; Wang, S M; Warburton, A; Waters, D; Weinberger, M; Wester, W C; Whitehouse, B; Whiteson, D; Wicklund, A B; Wicklund, E; Williams, G; Williams, H H; Wilson, P; Winer, B L; Wittich, P; Wolbers, S; Wolfe, C; Wright, T; Wu, X; Wynne, S M; Yagil, A; Yamamoto, K; Yamaoka, J; Yamashita, T; Yang, C; Yang, U K; Yang, Y C; Yao, W M; Yeh, G P; Yoh, J; Yorita, K; Yoshida, T; Yu, G B; Yu, I; Yu, S S; Yun, J C; Zanello, L; Zanetti, A; Zaw, I; Zhang, X; Zhou, J; Zucchelli, S

    2007-11-16

    We report an observation of new bottom baryons produced in pp collisions at the Tevatron. Using 1.1 fb(-1) of data collected by the CDF II detector, we observe four Lambda b 0 pi+/- resonances in the fully reconstructed decay mode Lambda b 0-->Lambda c + pi-, where Lambda c+-->pK* pi+. We interpret these states as the Sigma b(*)+/- baryons and measure the following masses: m Sigma b+=5807.8 -2.2 +2.0(stat.)+/-1.7(syst.) MeV/c2, m Sigma b- =5815.2+/-1.0(stat.)+/-1.7(syst.) MeV/c2, and m(Sigma b*)-m(Sigma b)=21.2-1.9 +2.0(stat.)-0.3+0.4(syst.) MeV/c2.

  19. Cyclo-octafluorobutane (PFC-318) in the global atmosphere

    Science.gov (United States)

    Muhle, J.; Vollmer, M. K.; Fraser, P. J.; Rhee, T. S.; Ivy, D. J.; Arnold, T.; Harth, C. M.; Salameh, P.; O'Doherty, S.; Young, D.; Steele, P.; Krummel, P. B.; Leist, M.; Schmidbauer, N.; Lunder, C.; Kim, J.; Kim, K.; Reimann, S.; Simmonds, P.; Prinn, R. G.; Weiss, R. F.

    2010-12-01

    PFC-318 (c-C4F8, cyclo-octafluorobutane) is a long-lived (3200 years) perfluorocarbon (PFC) greenhouse gas with a high 100-year Global Warming Potential (GWP100 = 10,300) and a wide range of industrial uses. We extend previous atmospheric measurements of PFC-318 in the Cape Grim Air Archive (Oram, 1999) with our new in situ measurements from remote and urban AGAGE (Advanced Global Atmospheric Gases Experiment) and affiliated stations. Our longest in situ record is from the Jungfraujoch observatory in the Swiss Alps, and our data set is augmented by measurements of flasks from the King Sejong and Troll coastal Antarctic stations and several locations in the Northern Hemisphere. In mid-2009 we find ˜1.25 ppt (parts-per-trillion, dry mol fraction) in the Northern Hemisphere and ˜1.20 ppt in the Southern Hemisphere, with rise rates of ˜0.03 ppt/yr and an interhemispheric ratio of ˜1.04. We obtain PFC-318 emissions for 2008-2010 of ˜1 Gg/yr using a simple box model, and preliminary measurements of older archived air at SIO indicate similar emissions since at the least the late 1990s. In contrast, the EDGAR v4 emissions database estimates much lower PFC-318 emissions of 0.02 Gg/yr for 2005. Using GWP100 we calculate ˜10 million tons of CO2-equivalent PFC-318 emissions/yr for 2008-2010, about double the CO2-equivalent PFC-218 annual emissions, or 0.4 times the CO2-equivalent PFC-116 annual emissions, reported for 2008-2009 by Mühle et al. (2010). Thus PFC-318 is the third most important PFC in terms of CO2-equivalent emissions. We find mostly baseline conditions at remote AGAGE stations and urban sites in the USA, Europe, and Australia, in contrast to frequent above baseline conditions at Gosan station, Jeju Island, South Korea, indicating significant emission sources in East Asia as found by Saito et al. (2010). Oram, D.E., Trends of long-lived anthropogenic halocarbons in the Southern Hemisphere and model calculation of global emissions, Ph.D. thesis, University

  20. vlPFC-vmPFC-Amygdala Interactions Underlie Age-Related Differences in Cognitive Regulation of Emotion.

    Science.gov (United States)

    Silvers, Jennifer A; Insel, Catherine; Powers, Alisa; Franz, Peter; Helion, Chelsea; Martin, Rebecca E; Weber, Jochen; Mischel, Walter; Casey, B J; Ochsner, Kevin N

    2017-07-01

    Emotion regulation is a critical life skill that develops throughout childhood and adolescence. Despite this development in emotional processes, little is known about how the underlying brain systems develop with age. This study examined emotion regulation in 112 individuals (aged 6-23 years) as they viewed aversive and neutral images using a reappraisal task. On "reappraisal" trials, participants were instructed to view the images as distant, a strategy that has been previously shown to reduce negative affect. On "reactivity" trials, participants were instructed to view the images without regulating emotions to assess baseline emotional responding. During reappraisal, age predicted less negative affect, reduced amygdala responses and inverse coupling between the ventromedial prefrontal cortex (vmPFC) and amygdala. Moreover, left ventrolateral prefrontal (vlPFC) recruitment mediated the relationship between increasing age and diminishing amygdala responses. This negative vlPFC-amygdala association was stronger for individuals with inverse coupling between the amygdala and vmPFC. These data provide evidence that vmPFC-amygdala connectivity facilitates vlPFC-related amygdala modulation across development. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  1. Improving laboratory data entry quality using Six Sigma.

    Science.gov (United States)

    Elbireer, Ali; Le Chasseur, Julie; Jackson, Brooks

    2013-01-01

    The Uganda Makerere University provides clinical laboratory support to over 70 clients in Uganda. With increased volume, manual data entry errors have steadily increased, prompting laboratory managers to employ the Six Sigma method to evaluate and reduce their problems. The purpose of this paper is to describe how laboratory data entry quality was improved by using Six Sigma. The Six Sigma Quality Improvement (QI) project team followed a sequence of steps, starting with defining project goals, measuring data entry errors to assess current performance, analyzing data and determining data-entry error root causes. Finally the team implemented changes and control measures to address the root causes and to maintain improvements. Establishing the Six Sigma project required considerable resources and maintaining the gains requires additional personnel time and dedicated resources. After initiating the Six Sigma project, there was a 60.5 percent reduction in data entry errors from 423 errors a month (i.e. 4.34 Six Sigma) in the first month, down to an average 166 errors/month (i.e. 4.65 Six Sigma) over 12 months. The team estimated the average cost of identifying and fixing a data entry error to be $16.25 per error. Thus, reducing errors by an average of 257 errors per month over one year has saved the laboratory an estimated $50,115 a year. The Six Sigma QI project provides a replicable framework for Ugandan laboratory staff and other resource-limited organizations to promote quality environment. Laboratory staff can deliver excellent care at a lower cost, by applying QI principles. This innovative QI method of reducing data entry errors in medical laboratories may improve the clinical workflow processes and make cost savings across the health care continuum.

  2. Manage your human sigma.

    Science.gov (United States)

    Fleming, John H; Coffman, Curt; Harter, James K

    2005-01-01

    If sales and service organizations are to improve, they must learn to measure and manage the quality of the employee-customer encounter. Quality improvement methodologies such as Six Sigma are extremely useful in manufacturing contexts, but they're less useful when it comes to human interactions. To address this problem, the authors have developed a quality improvement approach they refer to as Human Sigma. It weaves together a consistent method for assessing the employee-customer encounter and a disciplined process for managing and improving it. There are several core principles for measuring and managing the employee-customer encounter: It's important not to think like an economist or an engineer when assessing interactions because emotions inform both sides' judgments and behavior. The employee-customer encounter must be measured and managed locally, because there are enormous variations in quality at the work-group and individual levels. And to improve the quality of the employee-customer interaction, organizations must conduct both short-term, transactional interventions and long-term, transformational ones. Employee engagement and customer engagement are intimately connected--and, taken together, they have an outsized effect on financial performance. They therefore need to be managed holistically. That is, the responsibility for measuring and monitoring the health of employee-customer relationships must reside within a single organizational structure, with an executive champion who has the authority to initiate and manage change. Nevertheless, the local manager remains the single most important factor in local group performance. A local manager whose work group shows suboptimal performance should be encouraged to conduct interventions, such as targeted training, performance reviews, action learning, and individual coaching.

  3. Spectra of coset sigma models

    Energy Technology Data Exchange (ETDEWEB)

    Candu, Constantin [Institut fuer Theoretische Physik, Zuerich (Switzerland); Mitev, Vladimir [Humboldt-Universitaet, Berlin (Germany). Inst. fuer Mathematik; Humboldt-Universitaet, Berlin (Germany). Inst. fuer Physik; Schomerus, Volker [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group

    2013-08-15

    We compute the complete 1-loop spectrum of anomalous dimensions for the bulk fields of non-linear sigma models on symmetric coset (super)spaces G/H, both with and without world-sheet supersymmetry. In addition, we provide two new methods for the construction of partition functions in the infinite radius limit and demonstrate their efficiency in the case of (super)sphere sigma models. Our results apply to a large number of target spaces including superspheres and superprojective spaces such as the N=2 sigma model on CP{sup 3} {sup vertical} {sup stroke} {sup 4}.

  4. Six sigma for revenue retrieval.

    Science.gov (United States)

    Plonien, Cynthia

    2013-01-01

    Deficiencies in revenue retrieval due to failures in obtaining charges have contributed to a negative bottom line for numerous hospitals. Improving documentation practices through a Six Sigma process improvement initiative can minimize opportunities for errors through reviews and instill structure for compliance and consistency. Commitment to the Six Sigma principles with continuous monitoring of outcomes and constant communication of results to departments, management, and payers is a strong approach to reducing the financial impact of denials on an organization's revenues and expenses. Using Six Sigma tools can help improve the organization's financial performance not only for today, but also for health care's uncertain future.

  5. Spectra of coset sigma models

    International Nuclear Information System (INIS)

    Candu, Constantin; Mitev, Vladimir; Humboldt-Universitaet, Berlin; Schomerus, Volker

    2013-08-01

    We compute the complete 1-loop spectrum of anomalous dimensions for the bulk fields of non-linear sigma models on symmetric coset (super)spaces G/H, both with and without world-sheet supersymmetry. In addition, we provide two new methods for the construction of partition functions in the infinite radius limit and demonstrate their efficiency in the case of (super)sphere sigma models. Our results apply to a large number of target spaces including superspheres and superprojective spaces such as the N=2 sigma model on CP 3 vertical stroke 4 .

  6. Running Head: Implementing Six Sigma Efforts

    Science.gov (United States)

    Lindsay, Jamie Eleaitia Mae

    2005-01-01

    Six Sigma is an organization wide program that provides common set of goals, language, and methodology for improving the overall quality of the processes within the organization (Davis & Heineke 2004). Six Sigma main concern is for the customer. What will the customers want? Need? Six Sigma has a model that helps Sigma get implemented DMAIC model…

  7. Bridgeless SEPIC PFC Converter for Multistring LED Driver

    Science.gov (United States)

    Jha, Aman; Singh, Bhim

    2018-05-01

    This paper deals with Power Factor Correction (PFC) in Low Voltage High Current (LVHC) multi-string light emitting diode (LED) using a bridgeless (BL) single ended primary inductance converter (SEPIC). This application is designed for large area LED lighting with illumination control. A multi-mode LED dimming technique is used for the lighting control. The BL-SEPIC PFC converter is used as a load emulator for high power factor. The regulated low voltage from flyback converter is a source power to the synchronous buck converters for multi-string LED driver and forced cooling system for LED junction. The BL-SEPIC PFC converter inductor design is based on Discontinuous Inductor Current Modes (DICM) which provides good PFC at low cost. Test results are found quite satisfactory for universal input AC (90-265 V). There is significant improvement in the power factor and input current Total Harmonic Distortion (THD) with good margin of harmonic limits for lighting IEC 61000-3-2 Class C.

  8. Leaching of PFC from soils contaminated with PFC of different origin

    Science.gov (United States)

    Kalbe, Ute; Piechotta, Christian; Rothe, Robert

    2017-04-01

    Leaching tests are fundamental tools for the assessment of groundwater impact by contaminated soils concerning the soil-groundwater pathway. Such procedures are supposed to serve as the basis for a reliable leachate prognosis. They can be applied to determine the short and long term leaching behaviour as well as the source term of contaminated soils. For this purpose two types of leaching procedures have been validated in Germany for the examination of the leaching behaviour of frequently occurring organic substances (DIN 19528 - column test and DIN 19529 - batch test). A liquid-to-solid ratio (L/S) of 2 L/kg and 10 L/kg) is the basis for the risk assessment which is implemented in different German regulations. The equivalence of test results for both tests for the same material under investigation has been investigated for a variety of pollutants in order to assess their reliability in compliance testing. However, for emerging pollutants there is hardly data available on this issue. Leaching tests on soils contaminated with emerging pollutants such as PFC (Perfluorinated Surfactants) are currently coming more into consideration due to the increasing detection of contaminated sites. Therefore, two soils were investigated in this study from different contamination source (paper sludge containing compost and fire distinguishing foam) using both leaching tests and both liquid-to-solid ratios. The leachability of the various perfluorinated compounds in relation to their content in solid matter was considered. Furthermore the eluate pre-treatment prior analysis (in particular liquid/solid separation step needed for batch tests) has been taken into account. The comparability of the results from batch and column is dependent on the solubility of the various compounds, on the L/S and on the turbidity in the eluates.

  9. Integrated design of SIGMA uranium enrichment plants

    International Nuclear Information System (INIS)

    Rivarola, Martin E.; Brasnarof, Daniel O.

    1999-01-01

    In the present work, we describe a preliminary analysis of the design feedbacks in a Uranium Enrichment Plant, using the SIGMA concept. Starting from the result of this analysis, a computer code has been generated, which allows finding the optimal configurations of plants, for a fixed production rate. The computer code developed includes the model of the Thermohydraulic loop of a SIGMA module. The model contains numerical calculations of the main components of the circuit. During the calculations, the main components are dimensioned, for a posterior cost compute. The program also makes an estimation of the enrichment gain of the porous membrane, for each separation stage. Once the dimensions of the main components are known, using the enrichment cascade calculation, the capital and operation costs of the plant could be determined. At this point it is simple to calculate a leveled cost of the Separative Work Unit (SWU). A numerical optimizer is also included in the program. This optimizer finds the optimal cascade configuration, for a given set of design parameters. The whole-integrated program permits to investigate in detail the feedback in the component design. Therefore, the sensibility of the more relevant parameters can be computed, with respect of the economical variables of the plant. (author)

  10. Stunted PFC activity during neuromuscular control under stress with obesity.

    Science.gov (United States)

    Mehta, Ranjana K

    2016-02-01

    Obesity is an established risk factor for impaired cognition, which is primarily regulated by the prefrontal cortex (PFC). However, very little is known about the neural pathways that underlie obesity-related declines in neuromuscular control, particularly under stress. The purpose of this study was to determine the role of the PFC on neuromuscular control during handgrip exertions under stress with obesity. Twenty non-obese and obese young adults performed submaximal handgrip exertions in the absence and presence of a concurrent stressful task. Primary dependent measures included oxygenated hemoglobin (HbO2: a measure of PFC activity) and force fluctuations (an indicator of neuromuscular control). Higher HbO2 levels in the PFC were observed in the non-obese compared to the obese group (P = 0.009). In addition, higher HbO2 levels were observed in the stress compared to the control condition in the non-obese group; however, this trend was reversed in the obese group (P = 0.043). In general, force fluctuations increased by 26% in the stress when compared to the control condition (P = 0.001) and obesity was associated with 39% greater force fluctuation (P = 0.024). Finally, while not significant, obesity-related decrements in force fluctuations were magnified under stress (P = 0.063). The current study provides the first evidence that neuromuscular decrements with obesity were associated with impaired PFC activity and this relationship was augmented in stress conditions. These findings are important because they provide new information on obesity-specific changes in brain function associated with neuromuscular control since the knowledge previously focused largely on obesity-specific changes in peripheral muscle capacity.

  11. Fixed Points

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

  12. 78 FR 76389 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2013-12-17

    ... Aberdeen, South Dakota. Application Number: 13-03-C-00-ABR. Application Type: Impose and use a PFC. PFC... related improvements--design and construction. Redundant main electrical service feed--construction...

  13. Spectra of conformal sigma models

    International Nuclear Information System (INIS)

    Tlapak, Vaclav

    2015-04-01

    In this thesis the spectra of conformal sigma models defined on (generalized) symmetric spaces are analysed. The spaces where sigma models are conformal without the addition of a Wess-Zumino term are supermanifolds, in other words spaces that include fermionic directions. After a brief review of the general construction of vertex operators and the background field expansion, we compute the diagonal terms of the one-loop anomalous dimensions of sigma models on semi-symmetric spaces. We find that the results are formally identical to the symmetric case. However, unlike for sigma models on symmetric spaces, off diagonal terms that lead to operator mixing are also present. These are not computed here. We then present a detailed analysis of the one-loop spectrum of the supersphere S 3 vertical stroke 2 sigma model as one of the simplest examples. The analysis illustrates the power and simplicity of the construction. We use this data to revisit a duality with the OSP(4 vertical stroke 2) Gross-Neveu model that was proposed by Candu and Saleur. With the help of a recent all-loop result for the anomalous dimension of (1)/(2)BPS operators of Gross-Neveu models, we are able to recover the entire zero-mode spectrum of the supersphere model. We also argue that the sigma model constraints and its equations of motion are implemented correctly in the Gross-Neveu model, including the one-loop data. The duality is further supported by a new all-loop result for the anomalous dimension of the ground states of the sigma model. However, higher-gradient operators cannot be completely recovered. It is possible that this discrepancy is related to a known instability of the sigma model. The instability of sigma models is due to symmetry preserving high-gradient operators that become relevant at arbitrarily small values of the coupling. This feature has been observed long ago in one-loop calculations of the O(N)-vector model and soon been realized to be a generic property of sigma models

  14. Fix 40!

    Index Scriptorium Estoniae

    2008-01-01

    Ansambel Fix peab 13. detsembril Tallinnas Saku Suurhallis oma 40. sünnipäeva. Kontserdi erikülaline on ansambel Apelsin, kaastegevad Jassi Zahharov ja HaleBopp Singers. Õhtut juhib Tarmo Leinatamm

  15. Soliton surfaces associated with sigma models: differential and algebraic aspects

    International Nuclear Information System (INIS)

    Goldstein, P P; Grundland, A M; Post, S

    2012-01-01

    In this paper, we consider both differential and algebraic properties of surfaces associated with sigma models. It is shown that surfaces defined by the generalized Weierstrass formula for immersion for solutions of the CP N-1 sigma model with finite action, defined in the Riemann sphere, are themselves solutions of the Euler–Lagrange equations for sigma models. On the other hand, we show that the Euler–Lagrange equations for surfaces immersed in the Lie algebra su(N), with conformal coordinates, that are extremals of the area functional, subject to a fixed polynomial identity, are exactly the Euler–Lagrange equations for sigma models. In addition to these differential constraints, the algebraic constraints, in the form of eigenvalues of the immersion functions, are systematically treated. The spectrum of the immersion functions, for different dimensions of the model, as well as its symmetry properties and its transformation under the action of the ladder operators are discussed. Another approach to the dynamics is given, i.e. description in terms of the unitary matrix which diagonalizes both the immersion functions and the projectors constituting the model. (paper)

  16. SIX SIGMA: A LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    S.A. Oke

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Despite stiff international competition in the global market, world-class manufacturers are increasing their market share and profits through low-cost production, waste reduction in manufacturing, production of high quality products, and exceptional customer service. Six Sigma has been successfully implemented in this regard. In this paper, a selected survey of Six Sigma literature is presented to illustrate the wide scope of the application of the concept. This could be of immense benefit to organizations’ top management who need to understand the critical variables and factors for the successful implementation of Six Sigma programmes, leading to substantial, sustainable long-term improvement in performance results, value for money, and effort. The paper presents motivated pointers – substantiated as far as possible by data and evidence – to key success factors, variables, and their interrelationships.

    AFRIKAANSE OPSOMMING: Sterk internasionale mededinging ten spyt verhoog wêreldklasvervaardigers hul markaandeel en winste via laekosteproduksie, skrootvermindering, die produksie van gehalteprodukte en die lewering van primadiens aan klante. Ses Sigma is in hierdie verband as gereedskap suksesvol geïmplimenteer. Die artikel behandel 'n gekeurde oorsig van Ses Sigmaliteratuur om sodoende die toepassingsveldwyde van die konsep te illustreer. Die artikel is nuttig vir organisasiebestuurders uit die oogpunt van veranderlikes en suksesfaktore wat deur die Ses Sigmametode tot substansiële en volhoubare langtermyn verbeterings van 'n onderneming kan lei.

  17. Measuring emittances and sigma matrices

    International Nuclear Information System (INIS)

    Rees, J.; Rivkin, L.

    1984-03-01

    The method used for measuring emittance at the SLAC Linac and the linear collider damping ring is described. The basis of the method is derived using one two-by-two matrix to specify the state of the input beam (sigma matrix) and another to describe the lens-drift transport system (R-matrix)

  18. Six Sigma in healthcare delivery.

    Science.gov (United States)

    Liberatore, Matthew J

    2013-01-01

    The purpose of this paper is to conduct a comprehensive review and assessment of the extant Six Sigma healthcare literature, focusing on: application, process changes initiated and outcomes, including improvements in process metrics, cost and revenue. Data were obtained from an extensive literature search. Healthcare Six Sigma applications were categorized by functional area and department, key process metric, cost savings and revenue generation (if any) and other key implementation characteristics. Several inpatient care areas have seen most applications, including admission, discharge, medication administration, operating room (OR), cardiac and intensive care. About 42.1 percent of the applications have error rate as their driving metric, with the remainder focusing on process time (38 percent) and productivity (18.9 percent). While 67 percent had initial improvement in the key process metric, only 10 percent reported sustained improvement. Only 28 percent reported cost savings and 8 percent offered revenue enhancement. These results do not favorably assess Six Sigma's overall effectiveness and the value it offers healthcare. Results are based on reported applications. Future research can include directly surveying healthcare organizations to provide additional data for assessment. Future application should emphasize obtaining improvements that lead to significant and sustainable value. Healthcare staff can use the results to target promising areas. This article comprehensively assesses Six Sigma healthcare applications and impact.

  19. Activity in dlPFC and its effective connectivity to vmPFC are associated with temporal discounting

    Directory of Open Access Journals (Sweden)

    Todd A Hare

    2014-03-01

    Full Text Available There is widespread interest in identifying computational and neurobiological mechanisms that influence the ability to choose long-term benefits over more proximal and readily available rewards in domains such as dietary and economic choice. We present the results of a human fMRI study that examines how neural activity relates to observed individual differences in the discounting of future rewards during an intertemporal monetary choice task. We found that a region of left dlPFC BA-46 was more active in trials where subjects chose delayed rewards, after controlling for the subjective value of those rewards. We also found that the connectivity from dlPFC BA-46 to a region of vmPFC widely associated with the computational of stimulus values, increased at the time of choice, and especially during trials in which subjects chose delayed rewards. Finally, we found that estimates of effective connectivity between these two regions played a critical role in predicting out-of-sample, between-subject differences in discount rates. Together with previous findings in dietary choice, these results suggest that a common set of computational and neurobiological mechanisms facilitate choices in favor of long- term reward in both settings.

  20. Lean Six Sigma in financial services

    NARCIS (Netherlands)

    de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

    2008-01-01

    Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant

  1. Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

    OpenAIRE

    Alexandra Mirela Cristina MUNTEANU

    2017-01-01

    This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by...

  2. The coupling of Poisson sigma models to topological backgrounds

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Dario [School of Physics, Korea Institute for Advanced Study,Seoul 02455 (Korea, Republic of)

    2016-12-13

    We extend the coupling to the topological backgrounds, recently worked out for the 2-dimensional BF-model, to the most general Poisson sigma models. The coupling involves the choice of a Casimir function on the target manifold and modifies the BRST transformations. This in turn induces a change in the BRST cohomology of the resulting theory. The observables of the coupled theory are analyzed and their geometrical interpretation is given. We finally couple the theory to 2-dimensional topological gravity: this is the first step to study a topological string theory in propagation on a Poisson manifold. As an application, we show that the gauge-fixed vectorial supersymmetry of the Poisson sigma models has a natural explanation in terms of the theory coupled to topological gravity.

  3. Ultrafast Switching Superjunction MOSFETs for Single Phase PFC Applications

    DEFF Research Database (Denmark)

    Hernandez Botella, Juan Carlos; Petersen, Lars Press; Andersen, Michael A. E.

    2014-01-01

    This paper presents a guide on characterizing state-of-the-art silicon superjunction (SJ) devices in the 600V range for single phase power factor correction (PFC) applications. The characterization procedure is based on a minimally inductive double pulse tester (DPT) with a very low intrusive...... current measurement method, which enables reaching the switching speed limits of these devices. Due to the intrinsic low and non-linear capacitances in vertical SJ MOSFETs, special attention needs to be paid to the gate drive design to minimize oscillations and limit the maximum at turn off. This paper...

  4. Pharmacological and therapeutic directions in ADHD: Specificity in the PFC

    Directory of Open Access Journals (Sweden)

    Levy Florence

    2008-02-01

    Full Text Available Abstract Background Recent directions in the treatment of ADHD have involved both a broadening of pharmacological perspectives to include nor-adrenergic as well as dopaminergic agents. A review of animal and human studies of pharmacological and therapeutic directions in ADHD suggests that the D1 receptor is a specific site for dopaminergic regulation of the PFC, but optimal levels of dopamine (DA are required for beneficial effects on working memory. Animal and human studies indicate that the alpha-2A receptor is also important for prefrontal regulation, leaving open the question of the relative importance of these receptor sites. The therapeutic effects of ADHD medications in the prefrontal cortex have focused attention on the development of working memory capacity in ADHD. Hypothesis The actions of dopaminergic vs noradrenergic agents, currently available for the treatment of ADHD have overlapping, but different actions in the prefrontal cortex (PFC and subcortical centers. While stimulants act on D1 receptors in the dorsolateral prefrontal cortex, they also have effects on D2 receptors in the corpus striatum and may also have serotonergic effects at orbitofrontal areas. At therapeutic levels, dopamine (DA stimulation (through DAT transporter inhibition decreases noise level acting on subcortical D2 receptors, while NE stimulation (through alpha-2A agonists increases signal by acting preferentially in the PFC possibly on DAD1 receptors. On the other hand, alpha-2A noradrenergic transmission is more limited to the prefrontal cortex (PFC, and thus less likely to have motor or stereotypic side effects, while alpha-2B and alpha-2C agonists may have wider cortical effects. The data suggest a possible hierarchy of specificity in the current medications used in the treatment of ADHD, with guanfacine likely to be most specific for the treatment of prefrontal attentional and working memory deficits. Stimulants may have broader effects on both vigilance

  5. Hadron properties in chiral sigma model

    International Nuclear Information System (INIS)

    Shen Hong

    2005-01-01

    The modification of hadron masses in nuclear medium is studied by using the chiral sigma model, which is extended to generate the omega meson mass by the sigma condensation in the vacuum in the same way as the nucleon mass. The chiral sigma model provides proper equilibrium properties of nuclear matter. It is shown that the effective masses of both nucleons and omega mesons decrease in nuclear medium, while the effective mass of sigma mesons increases oat finite density in the chiral sigma model. The results obtained in the chiral sigma model are compared with those obtained in the Walecka model, which includes sigma and omega mesons in a non-chiral fashion. (author)

  6. Introduction to sigma model anomalies

    International Nuclear Information System (INIS)

    Nelson, P.

    1985-01-01

    This paper presents results dealing with the specific case in which a sigma model with fermions arises as a result of dynamical symmetry breakdown from some group G to a subgroup H. H may contain chiral symmetries protecting some fermions in a representation ρ H of H. In this case it may be impossible to quantize the remaining fermions in a way which reproduces the anomalous Ward identities of any underlying strongly-interacting gauge theory. The author concludes that this pattern of symmetry breakdown will not be realized in any such theory. The criterion in this case is local in character, since roughly speaking once the sigma model in question behaves for field configurations close to the vacuum base point in the internal mainfold is known, symmetry can be used to find how it behaves everywhere else

  7. Branes in Poisson sigma models

    International Nuclear Information System (INIS)

    Falceto, Fernando

    2010-01-01

    In this review we discuss possible boundary conditions (branes) for the Poisson sigma model. We show how to carry out the perturbative quantization in the presence of a general pre-Poisson brane and how this is related to the deformation quantization of Poisson structures. We conclude with an open problem: the perturbative quantization of the system when the boundary has several connected components and we use a different pre-Poisson brane in every component.

  8. Lean six sigma in healthcare.

    Science.gov (United States)

    de Koning, Henk; Verver, John P S; van den Heuvel, Jaap; Bisgaard, Soren; Does, Ronald J M M

    2006-01-01

    Healthcare, as with any other service operation, requires systematic innovation efforts to remain competitive, cost efficient, and up-to-date. This article outlines a methodology and presents examples to illustrate how principles of Lean Thinking and Six Sigma can be combined to provide an effective framework for producing systematic innovation efforts in healthcare. Controlling healthcare cost increases, improving quality, and providing better healthcare are some of the benefits of this approach.

  9. Topological sigma models on supermanifolds

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Bei, E-mail: beijia@physics.utexas.edu

    2017-02-15

    This paper concerns constructing topological sigma models governing maps from semirigid super Riemann surfaces to general target supermanifolds. We define both the A model and B model in this general setup by defining suitable BRST operators and physical observables. Using supersymmetric localization, we express correlation functions in these theories as integrals over suitable supermanifolds. In the case of the A model, we obtain an integral over the supermoduli space of “superinstantons”. The language of supergeometry is used extensively throughout this paper.

  10. Fuzzy Controlled Parallel AC-DC Converter for PFC

    Directory of Open Access Journals (Sweden)

    M Subba Rao

    2011-01-01

    Full Text Available Paralleling of converter modules is a well-known technique that is often used in medium-power applications to achieve the desired output power by using smaller size of high frequency transformers and inductors. In this paper, a parallel-connected single-phase PFC topology using flyback and forward converters is proposed to improve the output voltage regulation with simultaneous input power factor correction (PFC and control. The goal of the control is to stabilize the output voltage of the converter against the load variations. The paper presents the derivation of fuzzy control rules for the dc/dc converter circuit and control algorithm for regulating the dc/dc converter. This paper presents a design example and circuit analysis for 200 W power supply. The proposed approach offers cost effective, compact and efficient AC/DC converter by the use of parallel power processing. MATLAB/SIMULINK is used for implementation and simulation results show the performance improvement.

  11. Quantum mechanical theory of a structured atom-diatom collision system - A + BC/1-Sigma/

    Science.gov (United States)

    Devries, P. L.; George, T. F.

    1977-01-01

    The problem of a 2-p state atom colliding with a singlet sigma state diatom, which involves multiple potential surfaces, is investigated. Within a diabatic representation for the electronic degrees of freedom (plus spin-orbit interaction), coupled scattering equations are derived in both space-fixed and body-fixed coordinate systems. Coefficients, analogous to Percival-Seaton coefficients, are obtained. Approximations to the exact equations, including angular momenta decoupling approximations, are discussed for both the space-fixed and body-fixed formalisms.

  12. Barriers of six sigma in healthcare organizations

    Directory of Open Access Journals (Sweden)

    Serkan Deniz

    2018-09-01

    Full Text Available Six Sigma approach is based on decreasing defects and variations in the products and processes, and it provides important benefits to healthcare organizations. This study aims to identify managers’ opinions, who work in private healthcare organizations, about the reasons behind not using Six Sigma in their organizations. The research was performed between December 2016 and March 2018 in private healthcare organizations (private hospitals and medical centers operating in Turkey and not using Six Sigma approach. Data were collected from managers, who have knowledge about Six Sigma, through using surveys. In this study, survey methodology was used to collect data. According to the results, the biggest barrier related to not using Six Sigma is based on the lack of knowledge about Six Sigma. The other important barrier about the diffusion of Six Sigma within this organizations is related to the lack of support from top management and leaders. Another finding about the reasons of not applying Six Sigma approach is that there is not a statistically significant difference among managers in terms of their managerial position. In order to overcome the lack of knowledge about Six Sigma, it is advised that managers should take steps in the direction of promoting Six Sigma within their current organization, and provide necessary support and leadership about the process.

  13. 76 FR 34124 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2011-06-10

    ...--construction. Security equipment--fingerprinting machine (replacement). PFC Administrative costs. Brief... rescue and firefighting vehicle replacement. Electrical substation and distribution system rehabilitation...

  14. Investigating the role of the ventromedial prefrontal cortex (vmPFC in the assessment of brands

    Directory of Open Access Journals (Sweden)

    Jose Paulo eSantos

    2011-06-01

    Full Text Available The ventromedial prefrontal cortex (vmPFC is believed to be important in everyday preference judgments, processing emotions during decision-making. However, there is still controversy in the literature regarding the participation of the vmPFC. To further elucidate the contribution of the vmPFC in brand preference, we designed a functional magnetic resonance imaging (fMRI study where 18 subjects assessed positive, indifferent and fictitious brands. Also, both the period during and after the decision process were analyzed, hoping to unravel temporally the role of the vmPFC, using modeled and model-free fMRI analysis. Considering together the period before and after decision-making, there was activation of the vmPFC when comparing positive with indifferent or fictitious brands. However, when the decision-making period was separated from the moment after the response, and especially for positive brands, the vmPFC was more active after the choice than during the decision process itself, challenging some of the existing literature. The results of the present study support the notion that the vmPFC may be unimportant in the decision stage of brand preference, questioning theories that postulate that the vmPFC is in the origin of such a choice. Further studies are needed to investigate in detail why the vmPFC seems to be involved in brand preference only after the decision process.

  15. 76 FR 70809 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2011-11-15

    .... Pavement condition index airfield inspection. Brief Description of Withdrawn Projects: Safety management... management services. East terminal expansion. New upper level roadway, design and construction. PFC...

  16. The sigma model on complex projective superspaces

    Energy Technology Data Exchange (ETDEWEB)

    Candu, Constantin; Mitev, Vladimir; Schomerus, Volker [DESY, Hamburg (Germany). Theory Group; Quella, Thomas [Amsterdam Univ. (Netherlands). Inst. for Theoretical Physics; Saleur, Hubert [CEA Saclay, 91 - Gif-sur-Yvette (France). Inst. de Physique Theorique; USC, Los Angeles, CA (United States). Physics Dept.

    2009-08-15

    The sigma model on projective superspaces CP{sup S-1} {sup vertical} {sup stroke} {sup S} gives rise to a continuous family of interacting 2D conformal field theories which are parametrized by the curvature radius R and the theta angle {theta}. Our main goal is to determine the spectrum of the model, non-perturbatively as a function of both parameters. We succeed to do so for all open boundary conditions preserving the full global symmetry of the model. In string theory parlor, these correspond to volume filling branes that are equipped with a monopole line bundle and connection. The paper consists of two parts. In the first part, we approach the problem within the continuum formulation. Combining combinatorial arguments with perturbative studies and some simple free field calculations, we determine a closed formula for the partition function of the theory. This is then tested numerically in the second part. There we propose a spin chain regularization of the CP{sup S-1} {sup vertical} {sup stroke} {sup S} model with open boundary conditions and use it to determine the spectrum at the conformal fixed point. The numerical results are in remarkable agreement with the continuum analysis. (orig.)

  17. The sigma model on complex projective superspaces

    International Nuclear Information System (INIS)

    Candu, Constantin; Mitev, Vladimir; Schomerus, Volker; Quella, Thomas; Saleur, Hubert; USC, Los Angeles, CA

    2009-08-01

    The sigma model on projective superspaces CP S-1 vertical stroke S gives rise to a continuous family of interacting 2D conformal field theories which are parametrized by the curvature radius R and the theta angle θ. Our main goal is to determine the spectrum of the model, non-perturbatively as a function of both parameters. We succeed to do so for all open boundary conditions preserving the full global symmetry of the model. In string theory parlor, these correspond to volume filling branes that are equipped with a monopole line bundle and connection. The paper consists of two parts. In the first part, we approach the problem within the continuum formulation. Combining combinatorial arguments with perturbative studies and some simple free field calculations, we determine a closed formula for the partition function of the theory. This is then tested numerically in the second part. There we propose a spin chain regularization of the CP S-1 vertical stroke S model with open boundary conditions and use it to determine the spectrum at the conformal fixed point. The numerical results are in remarkable agreement with the continuum analysis. (orig.)

  18. Design for six sigma: A review

    Directory of Open Access Journals (Sweden)

    Kouroush Jenab

    2018-01-01

    Full Text Available Six Sigma is recognized as an essential tool for continuous improvement of quality. A large num-ber of publications by various authors reflect the interest in this technique. Reviews of literature on Six Sigma have been done in the past by a few authors. However, considering the contributions in the recent times, a more comprehensive review is attempted here. The authors have examined vari-ous papers and have proposed a different scheme of classification. In addition, certain gaps that would provide hints for further research in Six Sigma have been identified. As a results the rela-tionship between Six Sigma, Design for Six Sigma (DFSS, and how these two concepts support the quality system for organizational learning and innovation performance have been discussed that would help researchers, academicians and practitioners to take a closer look at the growth, devel-opment and applicability of Six Sigma in Design.

  19. Lean Six Sigma in financial services

    OpenAIRE

    de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

    2008-01-01

    Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant results and breakthrough improvements in financial services, as demonstrated with four case studies from Dutch multinational insurance companies. These cases demonstrate the importance of incremental i...

  20. Cohomological reduction of sigma models

    Energy Technology Data Exchange (ETDEWEB)

    Candu, Constantin; Mitev, Vladimir; Schomerus, Volker [DESY, Hamburg (Germany). Theory Group; Creutzig, Thomas [North Carolina Univ., Chapel Hill, NC (United States). Dept. of Physics and Astronomy

    2010-01-15

    This article studies some features of quantum field theories with internal supersymmetry, focusing mainly on 2-dimensional non-linear sigma models which take values in a coset superspace. It is discussed how BRST operators from the target space super- symmetry algebra can be used to identify subsectors which are often simpler than the original model and may allow for an explicit computation of correlation functions. After an extensive discussion of the general reduction scheme, we present a number of interesting examples, including symmetric superspaces G/G{sup Z{sub 2}} and coset superspaces of the form G/G{sup Z{sub 4}}. (orig.)

  1. Estimation of reliability of a interleaving PFC boost converter

    Directory of Open Access Journals (Sweden)

    Gulam Amer Sandepudi

    2010-01-01

    Full Text Available Reliability plays an important role in power supplies. For other electronic equipment, a certain failure mode, at least for a part of the total system, can often be employed without serious (critical effects. However, for power supply no such condition can be accepted, since very high demands on its reliability must be achieved. At higher power levels, the continuous conduction mode (CCM boost converter is preferred topology for implementation a front end with PFC. As a result, significant efforts have been made to improve the performance of high boost converter. This paper is one of the efforts for improving the performance of the converter from the reliability point of view. In this paper, interleaving boost power factor correction converter is simulated with single switch in continuous conduction mode (CCM, discontinuous conduction mode (DCM and critical conduction mode (CRM under different output power ratings. Results of the converter are explored from reliability point of view.

  2. Study on a Novel High-Efficiency Bridgeless PFC Converter

    Directory of Open Access Journals (Sweden)

    Cao Taiqiang

    2014-01-01

    Full Text Available In order to implement a high-efficiency bridgeless power factor correction converter, a new topology and operation principles of continuous conduction mode (CCM and DC steady-state character of the converter are analyzed, which show that the converter not only has bipolar-gain characteristic but also has the same characteristic as the traditional Boost converter, while the voltage transfer ratio is not related with the resonant branch parameters and switching frequency. Based on the above topology, a novel bridgeless Bipolar-Gain Pseudo-Boost PFC converter is proposed. With this converter, the diode rectifier bridge of traditional AC-DC converter is eliminated, and zero-current switching of fast recovery diode is achieved. Thus, the efficiency is improved. Next, we also propose the one-cycle control policy of this converter. Finally, experiments are provided to verify the accuracy and feasibility of the proposed converter.

  3. An efficiency improved single-phase PFC converter for electric vehicle charger applications

    DEFF Research Database (Denmark)

    Zhu, Dexuan; Tang, Yi; Jin, Chi

    2013-01-01

    This paper presents an efficiency improved single-phase power factor correction (PFC) converter with its target application to plug-in hybrid electric vehicle (PHEV) charging systems. The proposed PFC converter features sinusoidal input current, three-level output characteristic, and wide range...

  4. Study of radiation heat transfer between PFC and vacuum vessel during SST-1 baking

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhuri, Paritosh E-mail: paritosh@ipr.res.in; Chenna Reddy, D.; Santra, P.; Khirwadkar, S.; Ravi Pragash, N.; Saxena, Y.C

    2003-01-01

    Steady-state superconducting tokamak (SST-1) is a medium size tokamak with superconducting magnetic field coils. Plasma facing components (PFC) of SST-1 are placed inside the vacuum vessel (VV) of the tokamak and are designed to be compatible for steady-state operation. The main consideration in the design of the PFC is the steady-state heat removal of up to 1 MW/m{sup 2}. In addition to remove high heat fluxes, the PFC are also designed to be compatible for baking at high temperature. Since it is difficult to calculate the radiation heat loads between PFC and VV in a 3-D irregular geometry, a simplified model of concentric cylinders has been chosen for the purpose of estimation of the power requirements and the thermal responses of PFC and VV during their bakeout phases. Thermal responses of the PFC and VV have been analysed and the analytical results have been compared with 2-D finite element analysis using ANSYS. The radiation losses between PFC and VV also have been evaluated on the actual model containing all PFC inside the VV.

  5. 76 FR 12405 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2011-03-07

    ... monitoring terminals. Update pavement management program. Reimbursement for jet bridges and acquisition and.... Mandatory pavement markings. Airport signage. Runway guard lights. Wildlife study. PFC application.... Runway 18/36 pavement maintenance. Runway 13/31 pavement maintenance. PFC administration fees. Brief...

  6. 14 CFR 158.47 - Collection of PFC's on tickets issued outside the U.S.

    Science.gov (United States)

    2010-01-01

    ... OF TRANSPORTATION (CONTINUED) AIRPORTS PASSENGER FACILITY CHARGES (PFC'S) Collection, Handling, and... required to collect a PFC on air travel tickets issued on its own ticket stock unless it serves a point or... public agency controlling the last airport at which the passenger is enplaned prior to departure from the...

  7. Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

    Directory of Open Access Journals (Sweden)

    Alexandra Mirela Cristina MUNTEANU

    2017-06-01

    Full Text Available This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by author in order to reveal Lean Six Sigma’s benefits.

  8. De praktijk van Lean Six Sigma

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Koning, H.

    2008-01-01

    Zowel Lean als Six Sigma zijn benaderingen van kwaliteits- en efficiëntieverbetering die op dit moment sterk in de belangstelling staan van zowel de industrie als de dienstverlening. Lean Six Sigma integreert beide benaderingen. Ze wordt door sommigen gezien als panacee voor alle mogelijke

  9. Six Sigma: blauwdruk voor de kenniseconomie.

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Mast, J.

    2005-01-01

    Abstract Six Sigma is zo langzamerhand een niet weg te denken programma voor kwaliteits- en efficiencyverbeteringen. Het heeft met name voor enorme successen gezorgd in productiebedrijven. Six Sigma ligt ook onder vuur: het zou een trend zijn die voorbij gaat. De auteurs van dit artikel zijn het van

  10. Six Sigma als blauwdruk voor de kenniseconomie.

    NARCIS (Netherlands)

    de Mast, J.; Does, R.J.M.M.

    2005-01-01

    Abstract Six Sigma is zo langzamerhand een niet weg te denken programma voor kwaliteits- en efficiencyverbeteringen. Het heeft met name voor enorme successen gezorgd in productiebedrijven. Six Sigma ligt ook onder vuur: het zou een trend zijn die voorbij gaat. De auteurs van dit artikel zijn het van

  11. Some examples of instantons in sigma models

    International Nuclear Information System (INIS)

    Kogan, Ya.I.; Markushevich, D.G.; Morozov, A.Yu.; Ol'shanetskii, M.A.; Perelomov, A.M.; Roslyi, A.A.

    1989-01-01

    The paper considers (supersymmetric) sigma models in which the fields are defined on a Riemann surface of genus p and take values on a Kaehlerian manifold. Some mathematical methods for finding instantons and their zero modes in such sigma models are explained. Only holomorphic instantons are considered

  12. Sigma meson in heavy ion collision

    International Nuclear Information System (INIS)

    Cristian, Ivan; Fuchs, Christian

    2004-01-01

    We want to present a short theoretical prediction of the behaviour of the sigma meson in heavy ion collisions. It is considered that the sigma meson is a pion-pion correlation, resulting from the decay of the N*(1440) resonance. There will be presented some QMD simulations. (authors)

  13. Lean Six Sigma in a hospital

    NARCIS (Netherlands)

    van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.

    2006-01-01

    Abstract Hospitals today face major challenges. Patients demand quality of care to be improved continuously. Health insurance companies demand the lowest possible prices. Lean Six Sigma is a program that can help healthcare providers to achieve these (seemingly) conflicting goals. Lean Six Sigma is

  14. Integrating the Many Facets of Six Sigma

    NARCIS (Netherlands)

    de Mast, J.

    2007-01-01

    We seek to provide a unified characterization of Six Sigma by studying the phenomenon from the perspectives of business economics, organizational theory, competitive strategy and industrial statistics, and we pinpoint its core methodological principles. We describe Six Sigma as a prescriptive

  15. THE LEAN AND SIX SIGMA SINERGY

    Directory of Open Access Journals (Sweden)

    Mirko Sokovic

    2008-12-01

    Full Text Available Many organizations, dealing with continuous improvement methods, have realized that Lean and Six Sigma methodologies complement each other. Lean manufacturing focuses on the remova l of waste so that all processes in the total system add value from the customers' perspectives. The main emphasis of Six Sigma is the application of statistical tools in a disciplined manner, which requires data-driven decision-making. The integration of Lean and Six Sigma provides a synergetic effect, a rapid process improvement strategy for attaining organizational goals. When separated, Lean manufacturing cannot bring a process under statistical control, and Six Sigma cannot dramatically improve cycle time or reduce invested capital. Together, synergistic qualities are created to maximize the potential for a process improvement. The paper deals with Lean and Six Sigma principles and approaches used in modern manufacturing for process improvements, and bring forward benefits that are gained when these two methodologies are integrated.

  16. TA-55 and Sigma Overview

    Energy Technology Data Exchange (ETDEWEB)

    Spearing, Dane Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Safeguards Science and Technology Group (NEN-1)

    2016-11-29

    These are slides from a facility overview presentation for visiting agencies to Los Alamos National Laboratory (LANL). The TA-55 Plutonium Facility (PF-4) is discussed in detail. PF-4 is a unique resource for US plutonium programs. The basic design is flexible and has adapted to changing national needs. It is a robust facility with strong safety and security implementation. It supports a variety of national programs. It will continue for many years into the future. Sigma is then discussed in detail, which handles everything from hydrogen to uranium. It has been in long term service to the Nation (nearly 60 years). It has a flexible authorization basis to handle almost the entire periodic table. It has a wide breadth of prototyping and characterization capabilities. It has integrated program and line management.

  17. Nonabelian Gauged Linear Sigma Model

    Institute of Scientific and Technical Information of China (English)

    Yongbin RUAN

    2017-01-01

    The gauged linear sigma model (GLSM for short) is a 2d quantum field theory introduced by Witten twenty years ago.Since then,it has been investigated extensively in physics by Hori and others.Recently,an algebro-geometric theory (for both abelian and nonabelian GLSMs) was developed by the author and his collaborators so that he can start to rigorously compute its invariants and check against physical predications.The abelian GLSM was relatively better understood and is the focus of current mathematical investigation.In this article,the author would like to look over the horizon and consider the nonabelian GLSM.The nonabelian case possesses some new features unavailable to the abelian GLSM.To aid the future mathematical development,the author surveys some of the key problems inspired by physics in the nonabelian GLSM.

  18. Overall behaviour of PFC integrated SST-1 vacuum system

    Science.gov (United States)

    Khan, Ziauddin; Raval, Dilip C.; Paravasu, Yuvakiran; Semwal, Pratibha; Dhanani, Kalpeshkumar R.; George, Siju; Shoaib, Mohammad; Prakash, Arun; Babu, Gattu R.; Thankey, Prashant; Pathan, Firozkhan S.; Pradhan, Subrata

    2017-04-01

    As a part of phase-I up-gradation of Steady-state Superconducting Tokamak (SST-1), Graphite Plasma Facing Components (PFCs) have been integrated inside SST-1 vacuum vessel as a first wall (FW) during Nov 14 and May 2015. The SST-1 FW has a total surface area of the installed PFCs exposed to plasma is ∼ 40 m2 which is nearly 50% of the total surface area of stainless steel vacuum chamber (∼75 m2). The volume of the vessel within the PFCs is ∼ 16 m3. After the integration of PFCs, the entire vessel as well as the PFC cooling/baking circuits has been qualified with an integrated helium leak tightness of baked at 250 °C for nearly 20 hours employing hot nitrogen gas to remove the absorbed water vapours. Thereafter, Helium glow discharges cleaning were carried out towards the removal of surface impurities. The pump down characteristics of SST-1 vacuum chamber and the changes in the residual gaseous impurities after the installation of the PFCs will be discussed in this paper.

  19. Webová aplikace v PLC PFC200

    OpenAIRE

    Michalík, David

    2017-01-01

    Tato bakalářská práce se věnuje implementaci vlastního způsobu ovládání vstupů, výstupů a paměti PLC PFC200 od firmy WAGO pomocí dynamického webového rozhraní. Součástí práce je popis PLC, způsobů jeho ovládání, rešerše volně dostupných webových serverů pro Linux a popis metod pro vytvoření real-time ovládání. Výstupem je webová aplikace běžící na webovém serveru v PLC, využívající vlastní runtime systém formou daemon programů. This bachelor’s thesis is mainly focused on implementation of ...

  20. HIDRA: A new device for PFC and PMI development

    Science.gov (United States)

    Andruczyk, Daniel; Ruzic, David N.; Allain, Jean Paul; Curreli, Davide; HIDRA Team

    2014-10-01

    A toroidal plasma device is being constructed at the University of Illinois dedicated in part as a toroidal liquid-metal PFC technology test bench. The Hybrid Illinois stellarator/tokamak Device for Research and Applications (HIDRA) is a medium sized classical stellarator (previously WEGA, IPP Greifswald) with, R = 0.72 m, a = 0.19 m, B < 0.5 T and will be able to reach Te = 10-50 eV, ne = 1017--1018 m-3 with plasmas running up to several minutes. A critical knowledge gap for liquid-metal PFCs is their integration and performance in asymmetric confinement fusion environments. HIDRA will be used to evaluate technologies such as TEMHD driven flows for the first wall, help address key questions including whether a full toroidal liquid-metal loop can operate in a toroidal machine, test low recycling regimes and whether D can be removed and recycled easily. Also, UIUC's experience with in-situ diagnostics will open up new opportunities for innovative Material Application Testing (HIDRA-MAT).

  1. Japanese universities' activities for PFC development and PMI studies

    International Nuclear Information System (INIS)

    Hino, T.

    1998-01-01

    Development of reliable plasma facing components (PFC) with active cooling structures is required for divertor plates of fusion devices in order to remove a large heat flow to the divertor. It is also known that plasma material interactions (PMIs), i.e. fuel hydrogen recycling and erosion of plasma facing material (PFM) determine the energy confinement characteristics. The lifetime of PFCs is limited by the erosion of PFMs. In Japanese universities, studies concerning PFCs and PMIs have been carried out so far for LHD and ITER. For the LHD divertor, both graphite/copper brazed components and mechanical joint components have been developed, and the heat load performance has been examined. For the particle control in LHD, a localized divertor called LID has been designed, the preliminary experiment was conducted in a small helical device, the CHS. In order to reduce the oxygen impurity level, boronization experiments have been conducted systematically, and properties such as oxygen gettering and hydrogen retention were clarified. In the TRIAM-1M tokamak, the damage of PFMs has been investigated using a surface probe. Data on hydrogen retention, which determines the degree of hydrogen recycling, have been accumulated for graphite, Li, B, B 4 C, SiC and W. Conditioning methods are also suggested. In this paper, the problems associated with PFCs and PMIs are pointed out and data recently obtained in Japanese universities and NIFS are briefly introduced. (orig.)

  2. Effect of PFC recycling conditions on JET pedestal density

    International Nuclear Information System (INIS)

    Wiesen, S.; Brezinsek, S.; Dittmar, T.; Matveev, D.; Harting, D.; De la Luna, E.; Schmid, K.

    2016-01-01

    There is experimental evidence that the pedestal dynamics in type-I ELMy H-mode discharges is significantly affected by a change in the recycling conditions at the tungsten plasma-facing components (W-PFCs) after an ELM event. The integrated code JINTRAC has been employed to assess the impact of recycling conditions during type-I ELMs in JET ITER-like wall H-mode discharges. By employing a heuristic approach, a model to mimic the physical processes leading to formation and release (i.e. outgassing) of finite near-surface fuel reservoirs in W-PFCs has been implemented into the EDGE2D-EIRENE plasma-wall interaction code being part of JINTRAC. As main result it is shown, that a delay in the density pedestal build-up after an ELM event can be provoked by reduced recycling induced by depleted W-PFC particle near-surface reservoirs. However the pedestal temperature evolution is barely affected by the change in recycling parameters suggesting that the presented model is incomplete. (copyright 2016 The Authors. Contributions to Plasma Physics published by Wiley-VCH Verlag GmbH and Co. KGaA Weinheim. This)

  3. Lean Six Sigma implementation and organizational culture.

    Science.gov (United States)

    Knapp, Susan

    2015-01-01

    The purpose of this paper is to examine the relationship between four organizational cultural types defined by the Competing Values Framework and three Lean Six Sigma implementation components - management involvement, use of Lean Six Sigma methods and Lean Six Sigma infrastructure. The study involved surveying 446 human resource and quality managers from 223 hospitals located in Maine, New Hampshire, Vermont, Massachusetts and Rhode Island using the Organizational Culture Assessment Instrument. Findings - In total, 104 completed responses were received and analyzed using multivariate analysis of variance. Follow-up analysis of variances showed management support was significant, F(3, 100)=4.89, p cultures having significant interactions with management support. The relationship between organizational culture and Lean Six Sigma in hospitals provides information on how specific cultural characteristics impact the Lean Six Sigma initiative key components. This information assists hospital staff who are considering implementing quality initiatives by providing an understanding of what cultural values correspond to effective Lean Six Sigma implementation. Managers understanding the quality initiative cultural underpinnings, are attentive to the culture-shared values and norm's influence can utilize strategies to better implement Lean Six Sigma.

  4. Design and thermal-hydraulic analysis of PFC baking for SST-1 Tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhuri, Paritosh E-mail: paritosh@ipr.res.in; Reddy, D. Chenna; Khirwadkar, S.; Prakash, N. Ravi; Santra, P.; Saxena, Y.C

    2001-09-01

    The Steady-State Superconducting Tokamak (SST-1) is a medium-size tokamak with super-conducting magnetic field coils. Plasma facing components (PFC) of the SST-1, consisting of divertors, passive stabilisers, baffles, and poloidal limiters, are designed to be compatible for steady-state operation. Except for the poloidal limiters, all other PFC are structurally continuous in the toroidal direction. As SST-1 is designed to run double-null divertor plasmas, these components also have up-down symmetry. A closed divertor configuration is chosen to produce high recycling and high pumping speed in the divertor region. The passive stabilisers are located close to the plasma to provide stability against the vertical instability of the elongated plasma. The main consideration in the design of the PFC is the steady-state heat removal of up to 1 MW/m{sup 2}. In addition to removing high heat fluxes, the PFC are also designed to be compatible for baking at 350 deg. C. Different flow parameters and various tube layouts have been examined to select the optimum thermal-hydraulic parameters and tube layout for different PFC of SST-1. Thermal response of the PFC during baking has been performed analytically (using a Fortran code) and two-dimensional finite element analysis using ANSYS. The detailed thermal hydraulics and thermal responses of PFC baking is presented in this paper.

  5. Design and thermal-hydraulic analysis of PFC baking for SST-1 Tokamak

    International Nuclear Information System (INIS)

    Chaudhuri, Paritosh; Reddy, D. Chenna; Khirwadkar, S.; Prakash, N. Ravi; Santra, P.; Saxena, Y.C.

    2001-01-01

    The Steady-State Superconducting Tokamak (SST-1) is a medium-size tokamak with super-conducting magnetic field coils. Plasma facing components (PFC) of the SST-1, consisting of divertors, passive stabilisers, baffles, and poloidal limiters, are designed to be compatible for steady-state operation. Except for the poloidal limiters, all other PFC are structurally continuous in the toroidal direction. As SST-1 is designed to run double-null divertor plasmas, these components also have up-down symmetry. A closed divertor configuration is chosen to produce high recycling and high pumping speed in the divertor region. The passive stabilisers are located close to the plasma to provide stability against the vertical instability of the elongated plasma. The main consideration in the design of the PFC is the steady-state heat removal of up to 1 MW/m 2 . In addition to removing high heat fluxes, the PFC are also designed to be compatible for baking at 350 deg. C. Different flow parameters and various tube layouts have been examined to select the optimum thermal-hydraulic parameters and tube layout for different PFC of SST-1. Thermal response of the PFC during baking has been performed analytically (using a Fortran code) and two-dimensional finite element analysis using ANSYS. The detailed thermal hydraulics and thermal responses of PFC baking is presented in this paper

  6. SIGMA WEB INTERFACE FOR REACTOR DATA APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Pritychenko,B.; Sonzogni, A.A.

    2010-05-09

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  7. Sigma Web Interface For Reactor Data Applications

    International Nuclear Information System (INIS)

    Pritychenko, B.; Sonzogni, A.A.

    2010-01-01

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  8. IDENTIFICATION AND SELECTION OF SIX SIGMA PROJECTS

    Directory of Open Access Journals (Sweden)

    Abdalhkeim FA. Flifel

    2017-04-01

    Full Text Available Six Sigma is a well-structured and proven methodology for improving organizational performance. It helps achieving the goals of the organization through the use of project-driven approach. The implementation of Six sigma approach depends on proper identification and selection of projects, moreover, the selection of right Six sigma projects is one of the critical success factors of six sigma efforts. The paper provides the sources for the identification of potential projects, top down and bottom up approaches, the process of selection of projects, guidelines that assist the selection of appropriate projects, selection criteria which must be precisely chosen in accordance with the objectives, needs and capabilities of the organization as well as sophisticated techniques and tools recommended in the literature for the selection of projects.

  9. Evidence for the decay sigma+ --> pmu+ mu-.

    Science.gov (United States)

    Park, H K; Burnstein, R A; Chakravorty, A; Chen, Y C; Choong, W S; Clark, K; Dukes, E C; Durandet, C; Felix, J; Fu, Y; Gidal, G; Gustafson, H R; Holmstrom, T; Huang, M; James, C; Jenkins, C M; Jones, T; Kaplan, D M; Lederman, L M; Leros, N; Longo, M J; Lopez, F; Lu, L C; Luebke, W; Luk, K B; Nelson, K S; Perroud, J-P; Rajaram, D; Rubin, H A; Volk, J; White, C G; White, S L; Zyla, P

    2005-01-21

    We report the first evidence for the decay Sigma(+)-->pmu(+)mu(-) from data taken by the HyperCP (E871) experiment at Fermilab. Based on three observed events, the branching ratio is B(Sigma(+)-->pmu(+)mu(-))=[8.6(+6.6)(-5.4)(stat)+/-5.5(syst)]x10(-8). The narrow range of dimuon masses may indicate that the decay proceeds via a neutral intermediate state, Sigma(+)-->pP(0),P0-->mu(+)mu(-) with a P0 mass of 214.3+/-0.5 MeV/c(2) and branching ratio B(Sigma(+)-->pP(0),P0-->mu(+)mu(-))=[3.1(+2.4)(-1.9)(stat)+/-1.5(syst)]x10(-8).

  10. Lean six sigma application to transportation logistics

    Directory of Open Access Journals (Sweden)

    Simone Tavares Fernandes

    2012-06-01

    Full Text Available This work presents the application of Lean Six Sigma in a case study of a metallurgic industry. The Six Sigma and the Lean are two processes used by enterprises in Brazil and worldwide. Currently the integration of these processes is a challenge for these companies, which search a way more efficient to reduce their wastes and to adapt to the needs of their markets. The paper had as purpose to demonstrate the applicability of the Lean Six Sigma in a real logistical problem related to the transportation of goods among units of a metallurgic industry. The stages used for the solution of the problem follow the DMAIC cycle – Define, Measure, Analyze, Improve and Control. The paper presents in details the integrated approach of the improvement processes Lean and Six Sigma, their tools set, as well the excellent results obtained in the case study.

  11. Doubly graded sigma model with torsion

    International Nuclear Information System (INIS)

    Kowalski-Glikman, J.

    1986-08-01

    Using the Hull-Witten construction we show how to introduce torsion to the doubly graded sigma model. This construction enables us to find a link between this model and the ten-dimensional supergravity theory in superspace. (Auth.)

  12. Some examples of instantons in sigma models

    International Nuclear Information System (INIS)

    Kogan, Ya.; Markushevich, D.; Morozov, A.; Ol'shanetskya, M.; Perelomov, A.; Roslij, A.

    1988-01-01

    Instantons on some manifolds of type K3 are described. Zero modes in two-dimensional sigma models on such manifolds are counted. The necessary facts on K3 manifolds are exposed in monographs. Instanton configurations are described

  13. Neuroanatomy of the vmPFC and dlPFC predicts individual differences in cognitive regulation during dietary self-control across regulation strategies.

    Science.gov (United States)

    Schmidt, Liane; Tusche, Anita; Manoharan, Nicolas; Hutcherson, Cendri; Hare, Todd; Plassmann, Hilke

    2018-06-04

    Making healthy food choices is challenging for many people. Individuals differ greatly in their ability to follow health goals in the face of temptation, but it is unclear what underlies such differences. Using voxel-based morphometry (VBM), we investigated in healthy humans (i.e., men and women) links between structural variation in gray matter volume and individuals' level of success in shifting toward healthier food choices. We combined MRI and choice data into a joint dataset by pooling across three independent studies that employed a task prompting participants to explicitly focus on the healthiness of food items before making their food choices. Within this dataset, we found that individual differences in gray matter volume in the ventromedial prefrontal cortex (vmPFC) and dorsolateral prefrontal cortex (dlPFC) predicted regulatory success. We extended and confirmed these initial findings by predicting regulatory success out of sample and across tasks in a second dataset requiring participants to apply a different regulation strategy that entailed distancing from cravings for unhealthy, appetitive foods. Our findings suggest that neuroanatomical markers in the vmPFC and dlPFC generalized to different forms of dietary regulation strategies across participant groups. They provide novel evidence that structural differences in neuroanatomy of two key regions for valuation and its control, the vmPFC and dlPFC, predict an individual's ability to exert control in dietary choices. SIGNIFICANCE STATEMENT Dieting involves regulating food choices in order to eat healthier foods and fewer unhealthy foods. People differ dramatically in their ability to achieve or maintain this regulation, but it is unclear why. Here, we show that individuals with more gray matter volume in the dorsolateral and ventromedial prefrontal cortex are better at exercising dietary self-control. This relationship was observed across four different studies examining two different forms of dietary

  14. Reward acts on the pFC to enhance distractor resistance of working memory representations.

    Science.gov (United States)

    Fallon, Sean James; Cools, Roshan

    2014-12-01

    Working memory and reward processing are often thought to be separate, unrelated processes. However, most daily activities involve integrating these two types of information, and the two processes rarely, if ever, occur in isolation. Here, we show that working memory and reward interact in a task-dependent manner and that this task-dependent interaction involves modulation of the pFC by the ventral striatum. Specifically, BOLD signal during gains relative to losses in the ventral striatum and pFC was associated not only with enhanced distractor resistance but also with impairment in the ability to update working memory representations. Furthermore, the effect of reward on working memory was accompanied by differential coupling between the ventral striatum and ignore-related regions in the pFC. Together, these data demonstrate that reward-related signals modulate the balance between cognitive stability and cognitive flexibility by altering functional coupling between the ventral striatum and the pFC.

  15. 75 FR 65551 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-10-25

    ... lot and rehabilitate north public parking lot. Install high mast lighting for cargo apron. PFC program... that the portions of the proposed project related to the solar energy project were not eligible...

  16. The feasibility study of hot cell decontamination by the PFC spray method

    International Nuclear Information System (INIS)

    Hui-Jun Won; Chong-Hun Jung; Jei-Kwon Moon

    2008-01-01

    The characteristics of per-fluorocarbon compounds (PFC) are colorless, non-toxic, easily vaporized and nonflammable. Also, some of them are liquids of a high density, low surface tension, low latent heat and low specific heat. These particular chemical and physical properties of fluoro-organic compounds permit their use in very different fields such as electronics, medicine, tribology, nuclear and material science. The Sonatol process was developed under a contract with the DOE. The Sonatol process uses an ultrasonic agitation in a PFC solution that contains a fluorinated surfactant to remove radioactive particles from surfaces. Filtering the suspended particles allows the solutions to be reused indefinitely. They applied the Sonatol process to the decontamination of a heterogeneous legacy Pu-238 waste that exhibited an excessive hydrogen gas generation, which prevents a transportation of such a waste to a Waste Isolation Pilot Plant. Korea Atomic Energy Research Institute (KAERI) is developing dry decontamination technologies applicable to a decontamination of a highly radioactive area loosely contaminated with radioactive particles. This contamination has occurred as a result of an examination of a post-irradiated material or the development of the DUPIC process. The dry decontamination technologies developed are the carbon dioxide pellet spray method and the PFC spray method. As a part of the project, PFC ultrasonic decontamination technology was developed in 2004. The PFC spray decontamination method which is based on the test results of the PFC ultrasonic method has been under development since 2005. The developed PFC spray decontamination equipment consists of four modules (spray, collection, filtration and distillation). Vacuum cup of the collection module gathers the contaminated PFC solution, then the solution is moved to the filtration module and it is recycled. After a multiple recycling of the spent PFC solution, it is purified in the distillation

  17. Pion--nucleon sigma-commutator

    International Nuclear Information System (INIS)

    Banerjee, M.K.; Cammarata, J.B.

    1977-07-01

    The reasons for the large discrepancies in the magnitude of the πN sigma-commutator, sigma(πN), obtained by several authors are discussed using dynamic theory of the πN scattering amplitude. With sigma(πN) approximately 25 MeV this theory reproduces reasonably well both the experimental S-wave phase shifts at low energies and the amplitudes C approximately/sup(+)/(ν=0,t less than or equal to 0) determined by Langbein. In the method of Cheng and Dashen the value of sigma(πN) is obtained from these amplitudes by extrapolation to t = 2m 2 /sub π/. A study of the experimental D-wave ''scattering lengths'' implies that the coefficient of the term quadratic in t in the Hoehler expansion of C approximately/sup(+)/(0,t) is negative. Adding such a term to the results of the S-wave theory will tend to improve the agreement for C approximately/sup (+)/(0,t less than or equal to 0). These results suggest that the large ''world value'' sigma(πN) = 65 +- 5 MeV obtained using the Cheng-Dashen method is a consequence of errors in the extrapolation of amplitudes to the unphysical point ν = 0, t = 2m 2 /sub π/. Only the smaller value sigma(πN) approximately 25 MeV appears to be consistent with the experimental data and theoretical constraints

  18. Plasma Facing Components Generic Facilities Review Panel (PFC-GFRP): Final report

    International Nuclear Information System (INIS)

    McGrath, R.; Allen, S.; Hill, D.; Brooks, J.; Mattas, R.; Davis, J.; Lipschultz, B.; Ulrickson, M.

    1993-10-01

    The Plasma Facing Components (PFC) Facilities Review Panel was chartered by the US Department of Energy, Office of Fusion Energy, ITER (International Thermonuclear Experimental Reactor) and Technology Division, to outline the program plan and identify the supporting test facilities that lead to reliable, long-lived plasma facing components for ITER. This report summarizes the panel's findings and identifies the necessary and sufficient set of test facilities required for ITER PFC development

  19. Evaluation of 600V Superjunction Devices in Single Phase PFC Applications under CCM Operation

    DEFF Research Database (Denmark)

    Hernandez Botella, Juan Carlos; Petersen, Lars Press; Andersen, Michael A. E.

    2014-01-01

    electromagnetic interference (EMI). The dynamic characterization is based on a low inductive double pulse tester (DPT). The measured switching energy is used in order to evaluate the devices performance in a conventional PFC. This data is used together with the mathematical model for prediction of the conducted...... electromagnetic interference. The method allows comparing different devices and evaluating the performance as a function of the PFC power density and efficiency....

  20. Differential Functional Connectivity Alterations of Two Subdivisions within the Right dlPFC in Parkinson's Disease

    Directory of Open Access Journals (Sweden)

    Julian Caspers

    2017-05-01

    Full Text Available Patients suffering from Parkinson's disease (PD often show impairments in executive function (EF like decision-making and action control. The right dorsolateral prefrontal cortex (dlPFC has been strongly implicated in EF in healthy subjects and has repeatedly been reported to show alterations related to EF impairment in PD. Recently, two key regions for cognitive action control have been identified within the right dlPFC by co-activation based parcellation. While the posterior region is engaged in rather basal EF like stimulus integration and working memory, the anterior region has a more abstract, supervisory function. To investigate whether these functionally distinct subdivisions of right dlPFC are differentially affected in PD, we analyzed resting-state functional connectivity (FC in 39 PD patients and 44 age- and gender-matched healthy controls. Patients were examined both after at least 12 h withdrawal of dopaminergic drugs (OFF and under their regular dopaminergic medication (ON. We found that only the posterior right dlPFC subdivision shows FC alterations in PD, while the anterior part remains unaffected. PD-related decreased FC with posterior right dlPFC was found in the bilateral medial posterior parietal cortex (mPPC and left dorsal premotor region (PMd in the OFF state. In the medical ON, FC with left PMd normalized, while decoupling with bilateral mPPC remained. Furthermore, we observed increased FC between posterior right dlPFC and the bilateral dorsomedial prefrontal cortex (dmPFC in PD in the ON state. Our findings point to differential disturbances of right dlPFC connectivity in PD, which relate to its hierarchical organization of EF processing by stronger affecting the functionally basal posterior aspect than the hierarchically higher anterior part.

  1. Universality for 1d Random Band Matrices: Sigma-Model Approximation

    Science.gov (United States)

    Shcherbina, Mariya; Shcherbina, Tatyana

    2018-02-01

    The paper continues the development of the rigorous supersymmetric transfer matrix approach to the random band matrices started in (J Stat Phys 164:1233-1260, 2016; Commun Math Phys 351:1009-1044, 2017). We consider random Hermitian block band matrices consisting of W× W random Gaussian blocks (parametrized by j,k \\in Λ =[1,n]^d\\cap Z^d ) with a fixed entry's variance J_{jk}=δ _{j,k}W^{-1}+β Δ _{j,k}W^{-2} , β >0 in each block. Taking the limit W→ ∞ with fixed n and β , we derive the sigma-model approximation of the second correlation function similar to Efetov's one. Then, considering the limit β , n→ ∞, we prove that in the dimension d=1 the behaviour of the sigma-model approximation in the bulk of the spectrum, as β ≫ n , is determined by the classical Wigner-Dyson statistics.

  2. The six sigma program: an empirical study of brazilian companies.

    OpenAIRE

    Carvalho, Marly Monteiro de; Ho, Linda Lee; Pinto, Silvia Helena Boarin

    2014-01-01

    Purpose – The purpose of this paper is to assess the status of Six Sigma's status in Brazilian companies and understand the integration of this program with other quality management approaches. Additionally, the critical success factors (CSFs) for Six Sigma implementation and primary Six Sigma program characteristics were identified. Finally, the results of the used of Six Sigma were analysed. Design/methodology/approach – An extensive literature review illustrates the primary Six Sigma c...

  3. Engineering and thermal-hydraulics design of PFC cooling for SST-1 Tokamak

    International Nuclear Information System (INIS)

    Chaudhuri, Paritosh; Reddy, D. Chenna; Santra, P.; Khiwadkar, S.; Prakash, N. Rabi; Ramash, G.; Dubey, Santosh; Prakash, Arun; Saxena, Y. C.

    2003-01-01

    The main consideration in the design of the PFC cooling for SST-1 tokamak is the steady state heat removal of upto 1MW/m2. The PFC also has been design to withstand the peak heat fluxes without significant erosion such that frequent replacement is not necessary. Proper brazing of cooling tube on the copper back plate is necessary for the efficient heat transfer from the tube to the back plate. Design considerations included 2-D steady state and transient tile temperature distribution and resulting thermal loads in PFC during baking, and cooling, coolant parameters necessary to maintain optimum thermal-hydraulic design, and tile fitting mechanism. Finite Element (FE) models using ANSYS have been developed to conduct the heat transfer and stress analyses of the PFC to understand its thermal and mechanical behaviors. The temperature distribution results for different PFC obtained by FE results were assessed by comparison with 2-D Finite Difference code. The results of the calculation led to a good understanding of the coolant flow behavior and the temperature distribution in the tube wall and the different parts of the PFC. The contact at the brazed joint of the tube to the backplate is critical for the above application. The manufactured modules need to be evaluated for the quality of brazed joint. Using an infra-red-camera, spatial and temporal evaluation of the temperature profile is studied under various flow parameters. These results of this study will be presented in details in this paper

  4. Poisson sigma model with branes and hyperelliptic Riemann surfaces

    International Nuclear Information System (INIS)

    Ferrario, Andrea

    2008-01-01

    We derive the explicit form of the superpropagators in the presence of general boundary conditions (coisotropic branes) for the Poisson sigma model. This generalizes the results presented by Cattaneo and Felder [''A path integral approach to the Kontsevich quantization formula,'' Commun. Math. Phys. 212, 591 (2000)] and Cattaneo and Felder ['Coisotropic submanifolds in Poisson geometry and branes in the Poisson sigma model', Lett. Math. Phys. 69, 157 (2004)] for Kontsevich's angle function [Kontsevich, M., 'Deformation quantization of Poisson manifolds I', e-print arXiv:hep.th/0101170] used in the deformation quantization program of Poisson manifolds. The relevant superpropagators for n branes are defined as gauge fixed homotopy operators of a complex of differential forms on n sided polygons P n with particular ''alternating'' boundary conditions. In the presence of more than three branes we use first order Riemann theta functions with odd singular characteristics on the Jacobian variety of a hyperelliptic Riemann surface (canonical setting). In genus g the superpropagators present g zero mode contributions

  5. Time derived sigma for pulsed neutron capture logging

    International Nuclear Information System (INIS)

    Randall, R.R.; Fertl, W.F.; Hopkinson, E.C.

    1981-01-01

    The purpose of this study is to review field applications of the Atlas Neutron Lifetime Log service and to examine recent technical advances in the instrumentation and data analysis system. The major improvement to be discussed is a new method for computing /SIGMA/, the thermal neutron capture cross section of an earth formation. In the new method, the time after the neutron burst is measured for each gamma ray pulse detected by the instrumentation system within a gate of fixed width. This ''average pulse time'' is uniquely related to the thermal neutron decay rate observed in a borehole environment. The technique discussed is applicable for any condition where the neutron or gamma ray flux is time dependent. The advantages of this signal processing method, however, are most apparent for cases of rapid flux change with time, as in an exponential decay. 7 refs

  6. Six sigma quality for fuel manufacturing

    International Nuclear Information System (INIS)

    Gabbani, M.D.; Onderwater, T.

    1997-01-01

    It is widely recognized that operational performance in product manufacturing is largely determined by understanding and maintaining process capability. By definition, Six Sigma is a statistical unit of measure reflecting process capability that yields less' than 6.8 defects per million product produced. Statistically, this translates into obtaining a long term manufacturing process capability of ± 4.5 standard deviations about the mean within specification limits. The heart of the Six Sigma program developed by the Six Sigma Academy is what we refer to as the Breakthrough Strategy. This rigorous analytical methodology is the driving force in obtaining world class performance of Six Sigma. The methodology applies statistical and practical tools in resolving a problem or improving a product or process. The application of Six Sigma focuses on attacking process input variables (independent) rather than the output variables. Focusing on these independent variables (temperature, power, force, etc.) and the variation in the end product they create, enables us to get to the root of the problem rather than react to the symptoms of the problem. In this manner we prevent defects from occurring rather than inspecting and monitoring the product. Why the need for such an ambitious program? It is estimated that the cost of failure (rework, scrap, warranties, etc.) can be as high as 15% of sales for companies typically operating at 3-4 sigma. In achieving Six Sigma, costs of failure are typically less than 5%. The thought of reducing business costs while achieving the recognition of being our customer's premier choice provides enormous incentive to reach such status. (author)

  7. Correlation holography: imaging of atoms when sigma/sub inelastic//sup >>sigma/elastic

    International Nuclear Information System (INIS)

    Csonka, P.L.

    1979-01-01

    Atomic-scale resolution of details is possible with this method, even if protons interact with the atoms overwhelmingly inelastically, i.e. when sigma/sub inelastic/ >>sigma/sub elastic/. Observation of small objects is compatible with quantum mechanics even if the disturbance of the object caused by the observation process is arbitrarily small

  8. How the early sporulation sigma factor sigmaF delays the switch to late development in Bacillus subtilis.

    Science.gov (United States)

    Karmazyn-Campelli, Céline; Rhayat, Lamya; Carballido-López, Rut; Duperrier, Sandra; Frandsen, Niels; Stragier, Patrick

    2008-03-01

    Sporulation in Bacillus subtilis is a primitive differentiation process involving two cell types, the forespore and the mother cell. Each cell implements two successive transcription programmes controlled by specific sigma factors. We report that activity of sigma(G), the late forespore sigma factor, is kept in check by Gin, the product of csfB, a gene controlled by sigma(F), the early forespore sigma factor. Gin abolishes sigma(G) transcriptional activity when sigma(G) is artificially synthesized during growth, but has no effect on sigma(F). Gin interacts strongly with sigma(G) but not with sigma(F) in a yeast two-hybrid experiment. The absence of Gin allows sigma(G) to be active during sporulation independently of the mother-cell development to which it is normally coupled. Premature sigma(G) activity leads to the formation of slow-germinating spores, and complete deregulation of sigma(G) synthesis is lethal when combined with gin inactivation. Gin allows sigma(F) to delay the switch to the late forespore transcription programme by preventing sigma(G) to take over before the cell has reached a critical stage of development. A similar strategy, following a completely unrelated route, is used by the mother cell.

  9. Sigma virus and mutation in Drosophila melanogaster

    International Nuclear Information System (INIS)

    Paquin, S.L.A.

    1977-01-01

    - The objectives of these experiments have been (1) to verify and evidence more fully the action of sigma in causing recessive lethal mutation on the X chromosome of Drosophila, both in the male and the female germ line; (2) to extend the study of sigma-induced recessive lethal mutation to the Drosophila autosomes; (3) to explore the possibility that this mutagenesis is site-directed; (4) to study the effects of sigma virus in conjunction with radiation in increasing non-disjunction and dominant lethality. The virus increases the rate of radiation-induced nondisjunction by altering meiotic chromosomal behavior. Percentage of non-disjunction with 500 rads of x-rays in the virus-free flies was 0.176, while in sigma-containing lines it was 0.333. With high doses of either x or neutron radiation, the presence of the virus enhances the frequency of dominant lethality. The difference is especially significant with the fast neutrons. The results indicate that sigma, and presumably other viruses, are indeed environmental mutagens and are, therefore, factors in the rate of background or spontaneous mutation

  10. Six Lessons We Learned Applying Six Sigma

    Science.gov (United States)

    Carroll, Napoleon; Casleton, Christa H.

    2005-01-01

    As Chief Financial Officer of Kennedy Space Center (KSC), I'm not only responsible for financial planning and accounting but also for building strong partnerships with the CFO customers, who include Space Shuttle and International Space Station operations as well all who manage the KSC Spaceport. My never ending goal is to design, manage and continuously improve our core business processes so that they deliver world class products and services to the CFO's customers. I became interested in Six Sigma as Christa Casleton (KSC's first Six Sigma Black belt) applied Six Sigma tools and methods to our Plan and Account for Travel Costs Process. Her analysis was fresh, innovative and thorough but, even more impressive, was her approach to ensure ongoing, continuous process improvement. Encouraged by the results, I launched two more process improvement initiatives aimed at applying Six Sigma principles to CFO processes that not only touch most of my employees but also have direct customer impact. As many of you know, Six Sigma is a measurement scale that compares the output of a process with customer requirements. That's straight forward, but demands that you not only understand your processes but also know your products and the critical customer requirements. The objective is to isolate and eliminate the causes of process variation so that the customer sees consistently high quality.

  11. Sigma-2 receptor ligands QSAR model dataset

    Directory of Open Access Journals (Sweden)

    Antonio Rescifina

    2017-08-01

    Full Text Available The data have been obtained from the Sigma-2 Receptor Selective Ligands Database (S2RSLDB and refined according to the QSAR requirements. These data provide information about a set of 548 Sigma-2 (σ2 receptor ligands selective over Sigma-1 (σ1 receptor. The development of the QSAR model has been undertaken with the use of CORAL software using SMILES, molecular graphs and hybrid descriptors (SMILES and graph together. Data here reported include the regression for σ2 receptor pKi QSAR models. The QSAR model was also employed to predict the σ2 receptor pKi values of the FDA approved drugs that are herewith included.

  12. LEAN SIX SIGMA – MULTIPLE CASE STUDY

    Directory of Open Access Journals (Sweden)

    Delvio Venanzi

    2017-12-01

    Full Text Available Lean Six Sigma é uma gestão focada na qualidade e desempenho produtivo em sistemas operacionais. Este artigo discute os fundamentos desta metodologia através de duas diferentes concepções de gestão, Lean Manufacturing e Six Sigma. Primeiro, o artigo explica o DMAIC (definir, medir, analisar, melhorar e controlar e suas respectivas fases, após a filosofia Lean com o sipoc e técnicas de mapeamento de fluxo de valor. O artigo pretende mostrar a integração destes dois conceitos e seus resultados. A metodologia consistiu em uma teoria baseada em uma pesquisa bibliográfica de pesquisa exploratória que consistiu de três estudos de caso em empresas de diferenças localizadas em Sorocaba, São Paulo. Neste artigo estuda a aplicação de Lean Seis Sigma e seus resultados.

  13. Lattice sigma models with exact supersymmetry

    International Nuclear Information System (INIS)

    Simon Catterall; Sofiane Ghadab

    2004-01-01

    We show how to construct lattice sigma models in one, two and four dimensions which exhibit an exact fermionic symmetry. These models are discretized and twisted versions of conventional supersymmetric sigma models with N=2 supersymmetry. The fermionic symmetry corresponds to a scalar BRST charge built from the original supercharges. The lattice theories possess local actions and exhibit no fermion doubling. In the two and four dimensional theories we show that these lattice theories are invariant under additional discrete symmetries. We argue that the presence of these exact symmetries ensures that no fine tuning is required to achieve N=2 supersymmetry in the continuum limit. As a concrete example we show preliminary numerical results from a simulation of the O(3) supersymmetric sigma model in two dimensions. (author)

  14. Six Sigma Driven Enterprise Model Transformation

    Directory of Open Access Journals (Sweden)

    Raymond Vella

    2009-10-01

    Full Text Available Enterprise architecture methods provide a structured system to understand enterprise activities. However, existing enterprise modelling methodologies take static views of the enterprise and do not naturally lead to a path of improvement during enterprise model transformation. This paper discusses the need for a methodology to facilitate changes for improvement in an enterprise. The six sigma methodology is proposed as the tool to facilitate progressive and continual Enterprise Model Transformation to allow businesses to adapt to meet increased customer expectation and global competition. An alignment of six sigma with phases of GERAM life cycle is described with inclusion of Critical-To-Satisfaction (CTS requirements. The synergies of combining the two methodologies are presented in an effort to provide a more culturally embedded framework for Enterprise Model Transformation that builds on the success of six sigma.

  15. Engineering and thermal-hydraulic design of water cooled PFC for SST-1 tokamak

    International Nuclear Information System (INIS)

    Paritosh Chaudhuri; Santra, P.; Rabi Prakash, N.; Khirwadkar, S.; Arun Prakash, A.; Ramash, G.; Dubey, S.; Chenna Reddy, D.; Saxena, Y.C.

    2005-01-01

    Full text of publication follows: Steady state Superconducting Tokamak (SST-1) is a medium size tokamak with superconducting magnetic field coils. It is a large aspect ratio tokamak with a major radius of 1.1 m and minor radius of 0.20 m. SST-1 is designed for plasma discharge duration of ∼1000 seconds to obtain fully steady state plasma with total input power up to 1.0 MW. First Wall or Plasma Facing Components (PFC) is one or the major sub-systems of SST-1 tokamak consisting of divertors, passive stabilizers, baffles, and poloidal limiters are designed to be compatible for steady state operation. All the PFC has the same basic configuration: graphite tiles are mechanically attached to a back plate made of high strength copper alloy, and SS tubes are embedded in the groove made in the back plate. Same tube will be used for cooling during plasma operation and baking during wall conditioning. The main consideration in the design of the PFC is the steady state heat removal of up to 1 MW/m 2 . In addition to remove high heat fluxes, the PFC are also designed to be compatible for high temperature baking at 350 deg. C. Water was chosen as the coolant because of its appropriate thermal properties, and while baking, hot nitrogen gas would flow through these tubes to bake the PFC at high temperature. Extensive studies, involving different flow parameters and various cooling layouts, has been done to select the final cooling parameters and layout, compatible for cooling and baking. During steady state operation, divertor and passive stabilizer heat loads are expected to be 0.6 and 0.25 MW/m 2 . The PFC also has been design to withstand the peak heat fluxes without significant erosion such that frequent replacement is not necessary. Since the tile must be mechanically attached to the back plate (heat sink), the fitting technique must provide the highest mechanical stress so that thermal transfer efficiency is maximized. Proper brazing of cooling tube on the copper back

  16. A Lean Six Sigma journey in radiology.

    Science.gov (United States)

    Bucci, Ronald V; Musitano, Anne

    2011-01-01

    The department of radiology at Akron Children's Hospital embarked on a Lean Six Sigma mission as part of a hospital wide initiative to show increased customer satisfaction, reduce employee dissatisfaction and frustration, and decrease costs. Three processes that were addressed were reducing the MRI scheduling back-log, reconciling discrepancies in billing radiology procedures, and implementing a daily management system. Keys to success is that managers provide opportunities to openly communicate between department sections to break down barriers. Executive leaders must be engaged in Lean Six Sigma for the company to be successful.

  17. Supersymmetric sigma models and the heterotic string

    International Nuclear Information System (INIS)

    Hull, C.M.; Witten, E.

    1989-01-01

    The authors define the (1 + 1)-dimensional supersymmetry algebra of type (p, q) to be that generated by p right-handed Majorana-Weyl supercharges and q left-handed ones. They construct the non-linear sigma models with supersymmetry of type (1, 0) and (2, 0) and discuss their geometry and their relevance to compactifications of the heterotic superstring. The sigma-model anomalies can be canceled by a mechanism closely related to that used by Green and Schwarz to cancel gravitational and Yang-Mills anomalies for the superstring

  18. 6 Sigma DFSS technique with easy practice

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-12-15

    This book describes 6 Sigma DFSS technique which is easy to use. These are the titles of the contents : new demand, the reason that DFSS needs, when is DFSS used?, DMAIC and DMADV and the bastion for achievement of 6 sigma, new trouble, chief, Chang's new store, plan on kalguksu development propel, customers are holding the key, CTQ refinement, process capability evaluation, setting goal, finding of conception of optimum design, finding of design element, the last gateway, and it's time for a DFSS!.

  19. Interaction of sigma factor sigmaN with Escherichia coli RNA polymerase core enzyme.

    Science.gov (United States)

    Scott, D J; Ferguson, A L; Gallegos, M T; Pitt, M; Buck, M; Hoggett, J G

    2000-12-01

    The equilibrium binding and kinetics of assembly of the DNA-dependent RNA polymerase (RNAP) sigma(N)-holoenzyme has been investigated using biosynthetically labelled 7-azatryptophyl- (7AW)sigma(N). The spectroscopic properties of such 7AW proteins allows their absorbance and fluorescence to be monitored selectively, even in the presence of high concentrations of other tryptophan-containing proteins. The 7AWsigma(N) retained its biological activity in stimulating transcription from sigma(N)-specific promoters, and in in vitro gel electrophoresis assays of binding to core RNAP from Escherichia coli. Furthermore, five Trp-->Ala single mutants of sigma(N) were shown to support growth under conditions of nitrogen limitation, and showed comparable efficiency in activating the sigma(N)-dependent nifH promoter in vivo, indicating that none of the tryptophan residues were essential for activity. The equilibrium binding of 7AWsigma(N) to core RNAP was examined by analytical ultracentrifugation. In sedimentation equilibrium experiments, absorbance data at 315 nm (which reports selectively on the distribution of free and bound 7AWsigma(N)) established that a 1:1 complex was formed, with a dissociation constant lower than 2 microM. The kinetics of the interaction between 7AWsigma(N) and core RNAP was investigated using stopped-flow spectrofluorimetry. A biphasic decrease in fluorescence intensity was observed when samples were excited at 280 nm, whereas only the slower of the two phases was observed at 315 nm. The kinetic data were analysed in terms of a mechanism in which a fast bimolecular association of sigma(N) with core RNAP is followed by a relatively slow isomerization step. The consequences of these findings on the competition between sigma(N) and the major sigma factor, sigma(70), in Escherichia coli are discussed.

  20. Lean Six Sigma: a new approach to the management of patients undergoing prosthetic hip replacement surgery.

    Science.gov (United States)

    Improta, Giovanni; Balato, Giovanni; Romano, Maria; Carpentieri, Francesco; Bifulco, Paolo; Alessandro Russo, Mario; Rosa, Donato; Triassi, Maria; Cesarelli, Mario

    2015-08-01

    In 2012, health care spending in Italy reached €114.5 billion, accounting for 7.2% of the Gross Domestic Product (GDP) and 14.2% of total public spending. Therefore, reducing waste in health facilities could generate substantial cost savings. The objective of this study is to show that Lean Six Sigma represents an appropriate methodology for the development of a clinical pathway which allows to improve quality and to reduce costs in prosthetic hip replacement surgery. The methodology used for the development of a new clinical pathway was Lean Six Sigma. Problem solving in Lean Six Sigma is the DMAIC (Define, Measure, Analyse, Improve, Control) roadmap, characterized by five operational phases which make possible to reach fixed goals through a rigorous process of defining, measuring, analysing, improving and controlling business problems. The following project indicated several variables influencing the inappropriate prolongation of the length of stay for inpatient treatment and corrective actions were performed to improve the effectiveness and efficiency of the process of care. The average length of stay was reduced from 18.9 to 10.6 days (-44%). This article shows there is no trade-off between quality and costs: Lean Six Sigma improves quality and, at the same time, reduces costs. © 2015 John Wiley & Sons, Ltd.

  1. Maass waveforms arising from sigma and related indefinite theta functions

    OpenAIRE

    Zwegers, Sander

    2010-01-01

    In this paper we consider an example of a Maass waveform which was constructed by Cohen from a function $\\sigma$, studied by Andrews, Dyson and Hickerson, and it's companion $\\sigma^*$. We put this example in a more general framework.

  2. Cocaine craving during protracted withdrawal requires PKCε priming within vmPFC.

    Science.gov (United States)

    Miller, Bailey W; Wroten, Melissa G; Sacramento, Arianne D; Silva, Hannah E; Shin, Christina B; Vieira, Philip A; Ben-Shahar, Osnat; Kippin, Tod E; Szumlinski, Karen K

    2017-05-01

    In individuals with a history of drug taking, the capacity of drug-associated cues to elicit indices of drug craving intensifies or incubates with the passage of time during drug abstinence. This incubation of cocaine craving, as well as difficulties with learning to suppress drug-seeking behavior during protracted withdrawal, are associated with a time-dependent deregulation of ventromedial prefrontal cortex (vmPFC) function. As the molecular bases for cocaine-related vmPFC deregulation remain elusive, the present study assayed the consequences of extended access to intravenous cocaine (6 hours/day; 0.25 mg/infusion for 10 day) on the activational state of protein kinase C epsilon (PKCε), an enzyme highly implicated in drug-induced neuroplasticity. The opportunity to engage in cocaine seeking during cocaine abstinence time-dependently altered PKCε phosphorylation within vmPFC, with reduced and increased p-PKCε expression observed in early (3 days) and protracted (30 days) withdrawal, respectively. This effect was more robust within the ventromedial versus dorsomedial PFC, was not observed in comparable cocaine-experienced rats not tested for drug-seeking behavior and was distinct from the rise in phosphorylated extracellular signal-regulated kinase observed in cocaine-seeking rats. Further, the impact of inhibiting PKCε translocation within the vmPFC using TAT infusion proteins upon cue-elicited responding was determined and inhibition coinciding with the period of testing attenuated cocaine-seeking behavior, with an effect also apparent the next day. In contrast, inhibitor pretreatment prior to testing during early withdrawal was without effect. Thus, a history of excessive cocaine taking influences the cue reactivity of important intracellular signaling molecules within the vmPFC, with PKCε playing a critical role in the manifestation of cue-elicited cocaine seeking during protracted drug withdrawal. © 2016 Society for the Study of Addiction.

  3. Verification of radiation heat transfer analysis in KSTAR PFC and vacuum vessel during baking

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, S.Y. [Chungnam National University, 79 Daehak-ro, Yuseong-gu, Daejeon 34167 (Korea, Republic of); Kim, Y.J., E-mail: k43689@nfri.re.kr [National Fusion Research Institute, 169-148 Gwahang-ro, Yuseong-gu, Daejeon 34133 (Korea, Republic of); Kim, S.T.; Jung, N.Y.; Im, D.S.; Gong, J.D.; Lee, J.M.; Park, K.R.; Oh, Y.K. [National Fusion Research Institute, 169-148 Gwahang-ro, Yuseong-gu, Daejeon 34133 (Korea, Republic of)

    2016-11-01

    Highlights: • Thermal network is used to analyze heat transfer from PFC to VV. • Three heat transfer rate equations are derived based on the thermal network. • The equations is verified using Experimental data and design documents. • Most of the heat lost in tokamak is transferred to experimental room air. • The heat loss to the air is 101 kW of the total heat loss of 154 kW in tokamak. - Abstract: KSTAR PFC (Plasma Facing Component) and VV (Vacuum Vessel) were not arrived at the target temperatures in bake-out phase, which are 300 °C and 110 °C, respectively. The purpose of this study is to find out the reason why they have not been reached the target temperature. A thermal network analysis is used to investigate the radiation heat transfer from PFC to VV, and the thermal network is drawn up based on the actual KSTAR tokamak. The analysis model consists of three equations, and is solved using the EES (Engineering Equation Solver). The heat transfer rates obtained with the analysis model is verified using the experimental data at the KSTAR bake-out phase. The analyzed radiation heat transfer rates from PFC to VV agree quite well with those of experiment throughout the bake-out phase. Heat loss from PFC to experimental room air via flange of VV is also calculated and compared, which is found be the main reason of temperature gap between the target temperature and actually attained temperature of KSTAR PFC.

  4. Verification of radiation heat transfer analysis in KSTAR PFC and vacuum vessel during baking

    International Nuclear Information System (INIS)

    Yoo, S.Y.; Kim, Y.J.; Kim, S.T.; Jung, N.Y.; Im, D.S.; Gong, J.D.; Lee, J.M.; Park, K.R.; Oh, Y.K.

    2016-01-01

    Highlights: • Thermal network is used to analyze heat transfer from PFC to VV. • Three heat transfer rate equations are derived based on the thermal network. • The equations is verified using Experimental data and design documents. • Most of the heat lost in tokamak is transferred to experimental room air. • The heat loss to the air is 101 kW of the total heat loss of 154 kW in tokamak. - Abstract: KSTAR PFC (Plasma Facing Component) and VV (Vacuum Vessel) were not arrived at the target temperatures in bake-out phase, which are 300 °C and 110 °C, respectively. The purpose of this study is to find out the reason why they have not been reached the target temperature. A thermal network analysis is used to investigate the radiation heat transfer from PFC to VV, and the thermal network is drawn up based on the actual KSTAR tokamak. The analysis model consists of three equations, and is solved using the EES (Engineering Equation Solver). The heat transfer rates obtained with the analysis model is verified using the experimental data at the KSTAR bake-out phase. The analyzed radiation heat transfer rates from PFC to VV agree quite well with those of experiment throughout the bake-out phase. Heat loss from PFC to experimental room air via flange of VV is also calculated and compared, which is found be the main reason of temperature gap between the target temperature and actually attained temperature of KSTAR PFC.

  5. Some examples of instantons in sigma models

    International Nuclear Information System (INIS)

    Kogan, Ya.; Markushevich, D.; Morozov, A.; Ol'shanetskij, M.; Perelomov, A.; Roslyj, A.

    1988-01-01

    Holomorphic instantons of arbitrary generation in manifolds and their boson and fermion zero modes are determined within the scope of the sigma model. General formulae for their quantitative evaluation are presented. Zero modes of spherical and toroidal instantons are discussed in detail

  6. Extracytoplasmic function sigma factors in Pseudomonas syringae

    DEFF Research Database (Denmark)

    Kiil, Kristoffer; Oguiza, J.A.; Ussery, D.W.

    2005-01-01

    Genome analyses of the plant pathogens Pseudomonas syringae pv. tomato DC3000, pv. syringae B728a and pv. phaseolicola 1448A reveal fewer extracytoplasmic function (ECF) sigma factors than in related Pseudomonads with different lifestyles. We highlight the presence of a P. syringae-specific ECF...

  7. Lean Six Sigma: Stap voor stap

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Koning, H.; de Mast, J.

    2008-01-01

    Lean Six Sigma is de culminatie van ontwikkelingen in kwaliteitsverbetering in de 20ste eeuw. Het combineert belangrijke principes en technieken in een goed gestructureerde en geïntegreerde benadering. Het belichaamt wetenschappelijke inzichten over onderzoeksmethodologie, management en economie. In

  8. Need of Six Sigma in Education

    Science.gov (United States)

    Mehrotra, Dheeraj

    2007-01-01

    The marching trend of the new economic order has generated a new capsule of SIX SIGMA as a unified approach to process excellence. The tests reveal that it has transformed some of the most successful companies in the world like Motorola, GE etc. It is activated as an approach to aiming at the target by changing the culture of a company, involving…

  9. Six Sigma and Introductory Statistics Education

    Science.gov (United States)

    Maleyeff, John; Kaminsky, Frank C.

    2002-01-01

    A conflict exists between the way statistics is practiced in contemporary business environments and the way statistics is taught in schools of management. While businesses are embracing programs, such as six sigma and TQM, that bring statistical methods to the forefront of management decision making, students do not graduate with the skills to…

  10. How Six Sigma Methodology Improved Doctors' Performance

    Science.gov (United States)

    Zafiropoulos, George

    2015-01-01

    Six Sigma methodology was used in a District General Hospital to assess the effect of the introduction of an educational programme to limit unnecessary admissions. The performance of the doctors involved in the programme was assessed. Ishikawa Fishbone and 5 S's were initially used and Pareto analysis of their findings was performed. The results…

  11. Implementing Lean Six Sigma in organizations

    NARCIS (Netherlands)

    Lameijer, B.A.

    2017-01-01

    This thesis focuses on operational excellence following the Lean Six Sigma (LSS) method. As the popularity of implementing LSS grows, questions about implementing LSS in organizations arise, and this is where we aim to contribute. We study key questions about implementing LSS in organizations at two

  12. Harmonicity in supermanifolds and sigma models

    International Nuclear Information System (INIS)

    Munoz-Masque, Jaime; Vallejo, Jose A.

    2009-01-01

    We show that given an odd metric G on a supermanifold (M, A) and its associated Laplacian Δ, it is possible to interpret harmonic superfunctions (i.e., those f is an element of A such that Δf = 0) as solutions to a variational problem describing a supersymmetric sigma model.

  13. Sigma factors and promoters in Corynebacterium glutamicum

    Czech Academy of Sciences Publication Activity Database

    Pátek, Miroslav; Nešvera, Jan

    2011-01-01

    Roč. 154, 2-3 (2011), s. 101-113 ISSN 0168-1656 R&D Projects: GA ČR GC204/09/J015 Institutional research plan: CEZ:AV0Z50200510 Keywords : Corynebacterium glutamicum * Sigma factors * Promoters Subject RIV: EE - Microbiology, Virology Impact factor: 3.045, year: 2011

  14. Improving Learning Outcome Using Six Sigma Methodology

    Science.gov (United States)

    Tetteh, Godson A.

    2015-01-01

    Purpose: The purpose of this research paper is to apply the Six Sigma methodology to identify the attributes of a lecturer that will help improve a student's prior knowledge of a discipline from an initial "x" per cent knowledge to a higher "y" per cent of knowledge. Design/methodology/approach: The data collection method…

  15. Remarks on non compact sigma models

    International Nuclear Information System (INIS)

    Brunini, S.A.; Gomes, M.; Silva, A.J. da.

    1988-01-01

    O(N,1) noncompact sigma models quantized in an indefinite metric space. In two dimensions, by a direct computation the existence of a positive metric subspace where the S matrix is unitary. Is proved the properties of the model as function of the temperature are investigated in various space time dimensions. (author) [pt

  16. The Scientific Underpinning of Lean Six Sigma

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Mast, J.; de Koning, H.; Bisgaard, S.

    2007-01-01

    The twentieth century saw an incredible development of professional organizations. The impact of technological advances is obvious, but besides these, innovations in management structures and methods have resulted in the highly productive organizations of today. Lean Six Sigma is not revolutionary.

  17. Lean Six Sigma for Service and Healthcare

    NARCIS (Netherlands)

    de Mast, J.; Does, R.J.M.M.; de Koning, H.

    2006-01-01

    Lean Six Sigma is built on principles and methods that have proven themselves over the twentieth century. It has incorporated the most effective approaches and integrated them into a full programme. It offers a management structure for organizing continuous improvement of routine tasks, such as

  18. A prototypical Sigma-1 receptor antagonist protects against brain ischemia

    OpenAIRE

    Schetz, John A.; Perez, Evelyn; Liu, Ran; Chen, Shiuhwei; Lee, Ivan; Simpkins, James W.

    2007-01-01

    Previous studies indicate that the Sigma-1 ligand 4-phenyl-1-(4-phenylbutyl) piperidine (PPBP) protects the brain from ischemia. Less clear is whether protection is mediated by agonism or antagonism of the Sigma-1 receptor, and whether drugs already in use for other indications and that interact with the Sigma-1 receptor might also prevent oxidative damage due to conditions such as cerebral ischemic stroke. The antipsychotic drug haloperidol is an antagonist of Sigma-1 receptors and in this s...

  19. Simple Digital Control of a Two-Stage PFC Converter Using DSPIC30F Microprocessor

    DEFF Research Database (Denmark)

    Török, Lajos; Munk-Nielsen, Stig

    2010-01-01

    The use of dsPIC digital signal controllers (DSC) in Switch Mode Power Supply (SMPS) applications opens new perspectives for cheap and flexible digital control solutions. This paper presents the digital control of a two stage power factor corrector (PFC) converter. The PFC circuit is designed...... and built for 70W rated output power. Average current mode control for boost converter and current programmed control for forward converter are implemented on a dsPIC30F1010. Pulse Width Modulation (PWM) technique is used to drive the switching MOSFETs. Results show that digital solutions with ds...

  20. The structure of the .sigma.-ideal of .sigma.-porous sets

    Czech Academy of Sciences Publication Activity Database

    Zelený, M.; Pelant, Jan

    2004-01-01

    Roč. 45, č. 1 (2004), s. 37-72 ISSN 0010-2628 R&D Projects: GA ČR GA201/97/1161; GA ČR GA201/97/0216; GA ČR GA201/00/1466; GA AV ČR KSK1019101 Institutional research plan: CEZ:AV0Z1019905 Keywords : .sigma. proposity * descriptive set theory * .sigma.-ideal Subject RIV: BA - General Mathematics

  1. Incorporating Six Sigma Methodology Training into Chemical Engineering Education

    Science.gov (United States)

    Dai, Lenore L.

    2007-01-01

    Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

  2. Operational excellence (six sigma) philosophy: Application to software quality assurance

    Energy Technology Data Exchange (ETDEWEB)

    Lackner, M.

    1997-11-01

    This report contains viewgraphs on operational excellence philosophy of six sigma applied to software quality assurance. This report outlines the following: goal of six sigma; six sigma tools; manufacturing vs administrative processes; Software quality assurance document inspections; map software quality assurance requirements document; failure mode effects analysis for requirements document; measuring the right response variables; and questions.

  3. Commutative $C^*$-algebras and $\\sigma$-normal morphisms

    OpenAIRE

    de Jeu, Marcel

    2003-01-01

    We prove in an elementary fashion that the image of a commutative monotone $\\sigma$-complete $C^*$-algebra under a $\\sigma$-normal morphism is again monotone $\\sigma$-complete and give an application of this result in spectral theory.

  4. Reducing patients' falls rate in an Academic Medical Center (AMC) using Six Sigma "DMAIC" approach.

    Science.gov (United States)

    Kuwaiti, Ahmed Al; Subbarayalu, Arun Vijay

    2017-05-08

    Purpose The purpose of this paper is to evaluate the impact of adopting the Six Sigma define, measure, analyze, improve and control (DMAIC) approach in reducing patients fall rate in an Academic Medical Center, Saudi Arabia. Design/methodology/approach A prospective study design was adopted and this study was conducted at King Fahd Hospital of the University (KFHU) during the year 2014. Based on the historical data of the patients' falls reported at KFHU during the year 2013, the goal was fixed to reduce the falls rate from 7.18 toSix Sigma "DMAIC" approach improves the processes related to the prevention of falls. A greater reduction in patients falls rate (over 70 percent) was observed after the implementation of the improvement strategy.

  5. Modeling of structural and thermodynamics properties of sigma-phase for the Fe-Cr system

    Directory of Open Access Journals (Sweden)

    Udovskya A.

    2012-01-01

    Full Text Available The three- sub-lattice model (3SLM for description of atom’s distribution of two components with different coordination numbers (12, 14 and 15, into s-phase structure depended on composition and temperature is depictured in this paper. Energetic parameters of 3SLM were calculated by fitting procedure fixed to results obtained by ab-initio calculations conducted for paramagnetic states of differently ordered complexes stayed at the sigma-phase’s crystal structure for Fe-Cr system at 0 K. Respective algorithm and computer program have allowed to calculate an atom distribution of components upon the sub-lattices of s-phase at 300 - 1100 K. There is satisfactory agreement between calculated results and the experimental data obtained by neutron and structural research methods. Obtained results demonstrate satisfactory agreement between calculated and experimental data of BCC solutions and sigma - phase of the Fe-Cr system stayed at an equilibrium state.

  6. Orientifolds and D-branes in N=2 gauged linear sigma models

    CERN Document Server

    Brunner, Ilka

    We study parity symmetries and boundary conditions in the framework of gauged linear sigma models. This allows us to investigate the Kaehler moduli dependence of the physics of D-branes as well as orientifolds in a Calabi-Yau compactification. We first determine the parity action on D-branes and define the set of orientifold-invariant D-branes in the linear sigma model. Using probe branes on top of orientifold planes, we derive a general formula for the type (SO vs Sp) of orientifold planes. As applications, we show how compactifications with and without vector structure arise naturally at different real slices of the Kaehler moduli space of a Calabi-Yau compactification. We observe that orientifold planes located at certain components of the fixed point locus can change type when navigating through the stringy regime.

  7. 77 FR 33805 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2012-06-07

    ... AGENCY: Tri State Airport Authority, Huntington, West Virginia. APPLICATION NUMBER: 12-07-C-00-HTS... equipment. Install perimeter fencing. Rehabilitate terminal building. Rehabilitate taxiway A (west). Access.... Passenger loading bridges. Security exit lane equipment. PFC consulting fees. Brief Description of...

  8. Engagement of the PFC in Consolidation and Recall of Recent Spatial Memory

    Science.gov (United States)

    Leon, Wanda C.; Bruno, Martin A.; Allard, Simon; Nader, Karim; Cuello, A. Claudio

    2010-01-01

    The standard model of system consolidation proposes that memories are initially hippocampus dependent and become hippocampus independent over time. Previous studies have demonstrated the involvement of the medial prefrontal cortex (mPFC) in the retrieval of remote memories. The transformations required to make a memory undergo system's…

  9. 76 FR 56001 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2011-09-09

    ...: Regional intermodal transportation center. Determination: Partially approved. The FAA determined that... Approved for Collection and Use at a $3.00 PFC Level: Public information display kiosks. Wildlife hazard assessment study. Interactive employee training module. Blast fence extension--taxiway D. Aircraft rescue and...

  10. 14 CFR 158.45 - Collection of PFC's on tickets issued in the U.S.

    Science.gov (United States)

    2010-01-01

    ... travel ticket, issuing air carriers and their agents shall collect a PFC from a passenger only for the.... (3) Issuing carriers and their agents shall collect PFCs based on the itinerary at the time of... travel on a nonrefundable or expired ticket is not a change in itinerary. If the ticket purchaser is not...

  11. 78 FR 57211 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2013-09-17

    ... removal equipment. Emergency radio system upgrade. PFC administrative fees. Decision Date: November 1... Use: Taxiway A pavement analysis and soil test. Taxiway A pavement rehabilitation. Runway 17/35 rehabilitation design. Taxiway/apron/fuel road pavement replacement. Taxiway/apron/fuel road pavement replacement...

  12. A low cost rapid prototype platform for a three phase PFC rectifier application

    DEFF Research Database (Denmark)

    Haase, Frerk; Kouchaki, Alireza; Nymand, Morten

    2015-01-01

    In this paper the design and development of a low cost rapid prototype platform for a Three Phase PFC rectifier application is presented. The active rectifier consists of a SiC-MOSFET based PWM converter and a low cost rapid prototype platform for simulating and implementing the digital control...

  13. Robust control of boost PFC converter using adaptive PLL for line synchronization

    DEFF Research Database (Denmark)

    Török, Lajos; Mathe, Laszlo; Munk-Nielsen, Stig

    2013-01-01

    The continuous development of the digital processing technology made advanced control strategies available for switched-mode power-supply applications. This paper presents the study and implementation of an adaptive Phased-Locked Loop (PLL)-based grid-fault tolerant control of a boost PFC converter...

  14. On temporal connectivity of PFC via Gauss-Markov modeling of fNIRS signals.

    Science.gov (United States)

    Aydöre, Sergül; Mihçak, M Kivanç; Ciftçi, Koray; Akin, Ata

    2010-03-01

    Functional near-infrared spectroscopy (fNIRS) is an optical imaging method, which monitors the brain activation by measuring the successive changes in the concentration of oxy- and deoxyhemoglobin in real time. In this study, we present a method to investigate the functional connectivity of prefrontal cortex (PFC) Sby applying a Gauss-Markov model to fNIRS signals. The hemodynamic changes on PFC during the performance of cognitive paradigm are measured by fNIRS for 17 healthy adults. The color-word matching Stroop task is performed to activate 16 different regions of PFC. There are three different types of stimuli in this task, which can be listed as incongruent stimulus (IS), congruent stimulus (CS), and neutral stimulus (NS), respectively. We introduce a new measure, called "information transfer metric" (ITM) for each time sample. The behavior of ITMs during IS are significantly different from the ITMs during CS and NS, which is consistent with the outcome of the previous research, which concentrated on fNIRS signal analysis via color-word matching Stroop task. Our analysis shows that the functional connectivity of PFC is highly relevant with the cognitive load, i.e., functional connectivity increases with the increasing cognitive load.

  15. 75 FR 33376 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

    Science.gov (United States)

    2010-06-11

    ... Firefighting Station. Runway 18r/34l Overlay/Rehabilitation. Pavement Management Plan. Security Enhancement... maintain runway 16/34 pavement. PFC administration. Repair and maintain runway 03/21 pavement. Repair and maintain taxiway A pavement. Repair and maintain taxiway B pavement. [[Page 33377

  16. Coagulation performance of a novel poly-ferric-acetate (PFC) coagulant in phosphate-kaolin synthetic water treatment

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Yanxin; Lu, Jinpeng; Dong, Xiongzi; Yao, Chengli [Hefei Normal University, Hefei (China); Hao, Jianwen [Anhui Vocational and Technical College, Hefei (China)

    2017-10-15

    The process of coagulation-flocculation is increasingly applied in wastewater treatment. And the polymerized inorganic coagulants are widely used among these coagulation-flocculation processes. However, conventional coagulants using sulfates or chlorides as counter anion may give rise to corrosion. The purpose of this study was to synthesize PFC coagulants in which acetate is used as counter anion. The influences on the preparation of PFC were optimized. The synthesis was done at the optimum conditions, such as temperature of 60 .deg. C, the Fe/CH{sub 3}COOH molar ratio of 1 : 4.0 and reaction time of 6 h, respectively. The prepared PFC coagulants were characterized by Fourier transform infrared (FTIR) spectrophotometry and scanning electron microscopy (SEM). PFC was found to mainly form complexation polymeric species and present more cluster and lamellar structure. A series of jar tests were carried out to study the coagulation performance of PFC and PFS in phosphate-kaolin synthetic water treatment. Results showed that the coagulation performance of PFC was more efficient than PFS's in terms of the phosphorus removal efficiency and the residual turbidity. Due to using acetate as counter anion to iron, PFC is less harmful to the processes of water treatment and equipment than that of the conventional coagulants applied chlorides or sulfates. Therefore, PFC is a promising coagulant in the process of corrosion sensitive applications and the process of wastewater containing phosphorus treatment.

  17. APPLICATION OF SIX SIGMA METHODOLOGY TO REDUCE MEDICATION ERRORS IN THE OUTPATIENT PHARMACY UNIT: A CASE STUDY FROM THE KING FAHD UNIVERSITY HOSPITAL, SAUDI ARABIA

    Directory of Open Access Journals (Sweden)

    Ahmed Al Kuwaiti

    2016-06-01

    Full Text Available Medication errors will affect the patient safety and quality of healthcare. The aim of this study is to analyze the effect of Six Sigma (DMAIC methodology in reducing medication errors in the outpatient pharmacy of King Fahd Hospital of the University, Saudi Arabia. It was conducted through the five phases of Define, Measure, Analyze, Improve, Control (DMAIC model using various quality tools. The goal was fixed as to reduce medication errors in an outpatient pharmacy by 20%. After implementation of improvement strategies, there was a marked reduction of defects and also improvement of their sigma rating. Especially, Parts per million (PPM of prescription/data entry errors reduced from 56,000 to 5,000 and its sigma rating improved from 3.09 to 4.08. This study concluded that the Six Sigma (DMAIC methodology is found to be more significant in reducing medication errors and ensuring patient safety.

  18. Six sigma and lean production adoption in a manufacturing company

    Directory of Open Access Journals (Sweden)

    Alisson Christian Scheller

    2014-11-01

    Full Text Available The connection among Lean Production with Six Sigma originated the Lean Six Sigma methodology, focused on processes variation and waste reduction. This methodology was developed on different ways in the companies and there is no consensus over its structure and its implementation. In this context, this paper aims to identify and analyze the main characteristics on the adoption and integration of Lean Six Sigma methodology through a case study conducted in a manufacturing company that adopts lean production and six sigma. The results show two important aspects of the Lean Six Sigma methodology. One of them is the adoption of the value stream mapping as a central tool on Lean Six Sigma. The other is the use of DMAIC for improvements actions. The study indicates that despite the difficulties on Lean Six Sigma implementation, the methodology offers benefits to the company that adopts it in the suitable way.

  19. Uncertainty-Dependent Extinction of Fear Memory in an Amygdala-mPFC Neural Circuit Model

    Science.gov (United States)

    Li, Yuzhe; Nakae, Ken; Ishii, Shin; Naoki, Honda

    2016-01-01

    Uncertainty of fear conditioning is crucial for the acquisition and extinction of fear memory. Fear memory acquired through partial pairings of a conditioned stimulus (CS) and an unconditioned stimulus (US) is more resistant to extinction than that acquired through full pairings; this effect is known as the partial reinforcement extinction effect (PREE). Although the PREE has been explained by psychological theories, the neural mechanisms underlying the PREE remain largely unclear. Here, we developed a neural circuit model based on three distinct types of neurons (fear, persistent and extinction neurons) in the amygdala and medial prefrontal cortex (mPFC). In the model, the fear, persistent and extinction neurons encode predictions of net severity, of unconditioned stimulus (US) intensity, and of net safety, respectively. Our simulation successfully reproduces the PREE. We revealed that unpredictability of the US during extinction was represented by the combined responses of the three types of neurons, which are critical for the PREE. In addition, we extended the model to include amygdala subregions and the mPFC to address a recent finding that the ventral mPFC (vmPFC) is required for consolidating extinction memory but not for memory retrieval. Furthermore, model simulations led us to propose a novel procedure to enhance extinction learning through re-conditioning with a stronger US; strengthened fear memory up-regulates the extinction neuron, which, in turn, further inhibits the fear neuron during re-extinction. Thus, our models increased the understanding of the functional roles of the amygdala and vmPFC in the processing of uncertainty in fear conditioning and extinction. PMID:27617747

  20. 2-D temperature distribution and heat flux of PFC in 2011 KSTAR campaign

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Eunnam, E-mail: bang14@nfri.re.kr; Hong, Suk-Ho; Yu, Yaowei; Kim, Kyungmin; Kim, Hongtack; Kim, Hakkun; Lee, Kunsu; Yang, Hyunglyul

    2013-10-15

    Highlights: • The heat flux on PFC tiles of 12 s pulse duration and 630 kA plasma current is about 0.02 MW/m{sup 2}. • When the cryopump is operated, the heat flux of CD is higher than without cryopump. • The more H-mode duration is long, the more heat flux on divertor is high. -- Abstract: KSTAR has reached a plasma current up to 630 kA, plasma duration up to 12 s, and has achieved high confinement mode (H-mode) in 2011 campaign. The heat flux of PFC tile was estimated from the temperature increase of PFC since 2010. The heat flux of PFC tiles increases significantly with higher plasma current and longer pulse duration. The time-averaged heat flux of shots in 2010 campaign (with 3 s pulse durations and I{sub p} of 611 kA) is 0.01 MW/m{sup 2} while that in 2011 campaign (with 12 s pulse duration and I{sub p} of 630 kA) is about 0.02 MW/m{sup 2}. The heat flux at divertor is 1.4–2 times higher than that at inboard limiter or passive stabilizer. With the cryopump operation, the heat flux at the central divertor is higher than that without cryopump. The heat flux at divertor is proportional to, of course, the duration of H-mode. Furthermore, a software tool, which visualizes the 2D temperature distribution of PFC tile and estimates the heat flux in real time, is developed.

  1. Uncertainty-Dependent Extinction of Fear Memory in an Amygdala-mPFC Neural Circuit Model.

    Science.gov (United States)

    Li, Yuzhe; Nakae, Ken; Ishii, Shin; Naoki, Honda

    2016-09-01

    Uncertainty of fear conditioning is crucial for the acquisition and extinction of fear memory. Fear memory acquired through partial pairings of a conditioned stimulus (CS) and an unconditioned stimulus (US) is more resistant to extinction than that acquired through full pairings; this effect is known as the partial reinforcement extinction effect (PREE). Although the PREE has been explained by psychological theories, the neural mechanisms underlying the PREE remain largely unclear. Here, we developed a neural circuit model based on three distinct types of neurons (fear, persistent and extinction neurons) in the amygdala and medial prefrontal cortex (mPFC). In the model, the fear, persistent and extinction neurons encode predictions of net severity, of unconditioned stimulus (US) intensity, and of net safety, respectively. Our simulation successfully reproduces the PREE. We revealed that unpredictability of the US during extinction was represented by the combined responses of the three types of neurons, which are critical for the PREE. In addition, we extended the model to include amygdala subregions and the mPFC to address a recent finding that the ventral mPFC (vmPFC) is required for consolidating extinction memory but not for memory retrieval. Furthermore, model simulations led us to propose a novel procedure to enhance extinction learning through re-conditioning with a stronger US; strengthened fear memory up-regulates the extinction neuron, which, in turn, further inhibits the fear neuron during re-extinction. Thus, our models increased the understanding of the functional roles of the amygdala and vmPFC in the processing of uncertainty in fear conditioning and extinction.

  2. Enterprise Engineering Method supporting Six Sigma Approach

    OpenAIRE

    Jochem, Roland

    2007-01-01

    Enterprise Modeling (EM) is currently in operation either as a technique to represent and understand the structure and behavior of the enterprise, or as a technique to analyze business processes, and in many cases as support technique for business process reengineering. However, EM architectures and methodes for Enterprise Engineering can also used to support new management techniques like SIX SIGMA, because these new techniques need a clear, transparent and integrated definition and descript...

  3. Generalized Mathai-Quillen Topological Sigma Models

    OpenAIRE

    Llatas, Pablo M.

    1995-01-01

    A simple field theoretical approach to Mathai-Quillen topological field theories of maps $X: M_I \\to M_T$ from an internal space to a target space is presented. As an example of applications of our formalism we compute by applying our formulas the action and Q-variations of the fields of two well known topological systems: Topological Quantum Mechanics and type-A topological Sigma Model.

  4. TQM and six sigma in accounting literature

    OpenAIRE

    Vieira, João Manuel Franco Coelho Gouveia

    2014-01-01

    This study is based on the investigation of the relation between management accounting, Total Quality Management and six sigma, in articles published in 5 of the most renowned accounting journals: Management Accounting Review; European Accounting Review; Accounting, Auditing and Accountability; Critical Perspectives on Accounting; and Accounting Organizations and Society. Despite the vast existent literature related to both management accounting and quality management, this investigation c...

  5. Understanding delta-sigma data converters

    CERN Document Server

    Pavan, Shanti; Temes, Gabor C

    2017-01-01

    This new edition introduces novel analysis and design techniques for delta-sigma (ΔΣ) converters in physical and conceptual terms, and includes new chapters that explore developments in the field over the last decade. This book explains the principles and operation of delta-sigma analog-to-digital converters (ADCs) in physical and conceptual terms in accordance with the most recent developments in the field. The interest of ΔΣ converter designers has shifted significantly over the past decade, due to many new applications for data converters at the far ends of the frequency spectrum. Continuous-time delta-sigma A/D converters with GHz clocks, of both lowpass and bandpass types, are required for wireless applications. At the other extreme, multiplexed ADCs with very narrow (sometimes 10 Hz wide) signal bandwidths, but very high accuracy are needed in the interfaces of biomedical and environmental sensors. To reflect the changing eeds of designers, the second edition includes significant new material on bo...

  6. Simple adaptive control system design for a quadrotor with an internal PFC

    Energy Technology Data Exchange (ETDEWEB)

    Mizumoto, Ikuro; Nakamura, Takuto; Kumon, Makoto; Takagi, Taro [Dept. of Mechanical Systems Engineering, Kumamoto University 2-39-1 Kurokami, Kumamoto, 860-8555 (Japan)

    2014-12-10

    The paper deals with an adaptive control system design problem for a four rotor helicopter or quadrotor. A simple adaptive control design scheme with a parallel feedforward compensator (PFC) in the internal loop of the considered quadrotor will be proposed based on the backstepping strategy. As is well known, the backstepping control strategy is one of the advanced control strategy for nonlinear systems. However, the control algorithm will become complex if the system has higher order relative degrees. We will show that one can skip some design steps of the backstepping method by introducing a PFC in the inner loop of the considered quadrotor, so that the structure of the obtained controller will be simplified and a high gain based adaptive feedback control system will be designed. The effectiveness of the proposed method will be confirmed through numerical simulations.

  7. Study of intermittent bifurcations and chaos in boost PFC converters by nonlinear discrete models

    International Nuclear Information System (INIS)

    Zhang Hao; Ma Xikui; Xue Bianling; Liu Weizeng

    2005-01-01

    This paper mainly deals with nonlinear phenomena like intermittent bifurcations and chaos in boost PFC converters under peak-current control mode. Two nonlinear models in the form of discrete maps are derived to describe precisely the nonlinear dynamics of boost PFC converters from two points of view, i.e., low- and high-frequency regimes. Based on the presented discrete models, both the evolution of intermittent behavior and the periodicity of intermittency are investigated in detail from the fast and slow-scale aspects, respectively. Numerical results show that the occurrence of intermittent bifurcations and chaos with half one line period is one of the most distinguished dynamical characteristics. Finally, we make some instructive conclusions, which prove to be helpful in improving the performances of practical circuits

  8. Isolated EWiRaC: A New Low-Stress Single-Stage Isolated PFC Converter

    DEFF Research Database (Denmark)

    Schneider, Henrik; Bergendorff, Stefan Pihl; Petersen, Lars

    2007-01-01

    A new PFC-family of Efficient Wide Range Converters named EWiRaC was recently introduced. EWiRaC has a major advantage in terms of efficiency at low-line and handles challenges like inrush current limiting as an integrated part of the conversion scheme. The main objective of this paper is to inve......A new PFC-family of Efficient Wide Range Converters named EWiRaC was recently introduced. EWiRaC has a major advantage in terms of efficiency at low-line and handles challenges like inrush current limiting as an integrated part of the conversion scheme. The main objective of this paper...

  9. High-power piezo drive amplifier for large stack and PFC applications

    Science.gov (United States)

    Clingman, Dan J.; Gamble, Mike

    2001-08-01

    This paper describes the continuing development of Boeing High Power Piezo Drive Amplifiers. Described is the development and testing of a 1500 Vpp, 8 amp switching amplifier. This amplifier is used to drive a piezo stack driven rotor blade trailing edge flap on a full size helicopter. Also discuss is a switching amplifier designed to drive a Piezo Fiber Composite (PFC) active twist rotor blade. This amplifier was designed to drive the PFC material at 2000 Vpp and 0.5 amps. These amplifiers recycle reactive energy, allowing for a power and weight efficient amplifier design. This work was done in conjunction with the DARPA sponsored Phase II Smart Rotor Blade program and the NASA Langley Research Center sponsored Active Twist Rotor (ATR) blade program.

  10. Forward Conduction Mode Controlled Piezoelectric Transformer-Based PFC LED Drive

    DEFF Research Database (Denmark)

    Roedgaard, M. S.; Weirich, M.; Andersen, M. A. E.

    2013-01-01

    Light-emitting diode (LED) illumination is getting more and more common; as LED's performance is rising, the price is falling and is getting competitive. Some of the challenges of ac mains supplied illumination are the requirement of power factor correction (PFC) and the competitiveness of a low...... priced market. In this paper, a new forward conduction mode (FCM) control method for piezoelectric transformer (PT)-based power converters is proposed. A PT-based LED drive facilitating passive PFC is developed, utilizing and validating the FCM control method. The drive utilizes an inductorless half...... LED drive has been developed, supplied from 230-V 50-Hz ac mains, achieving a power factor of 0.96....

  11. Heterotic sigma models and non-linear strings

    International Nuclear Information System (INIS)

    Hull, C.M.

    1986-01-01

    The two-dimensional supersymmetric non-linear sigma models are examined with respect to the heterotic string. The paper was presented at the workshop on :Supersymmetry and its applications', Cambridge, United Kingdom, 1985. The non-linear sigma model with Wess-Zumino-type term, the coupling of the fermionic superfields to the sigma model, super-conformal invariance, and the supersymmetric string, are all discussed. (U.K.)

  12. Six Sigma Process and its Impact on the Organizational Productivity

    OpenAIRE

    Masoud Hekmatpanah; Mohammad Sadroddin; Saeid Shahbaz; Farhad Mokhtari; Farahnaz Fadavinia

    2008-01-01

    The six sigma method is a project-driven management approach to improve the organization-s products, services, and processes by continually reducing defects in the organization. Understanding the key features, obstacles, and shortcomings of the six sigma method allows organizations to better support their strategic directions, and increasing needs for coaching, mentoring, and training. It also provides opportunities to better implement six sigma projects. The purpose of this paper is the surv...

  13. The use of the Six Sigma concept in supply logistics

    Directory of Open Access Journals (Sweden)

    Agnieszka Szmelter

    2012-12-01

    Full Text Available This paper aims to present Six Sigma as one of the concepts of business process improvement, including logistics processes. Firstly, the author presents the role of information logistics and controlling to improve the efficiency of supply logistics. Then, she focuses on the characteristics of Six Sigma, including Lean Management philosophy, and identifies the connection between logistics and this methodology. She also presents an example of using the Six Sigma tools in the process of supply in a chosen company.

  14. Six Sigma, absorptive capacity and organizational learning orientation

    OpenAIRE

    Gutiérrez Gutiérrez , Leopoldo J; Bustinza Sánchez , Oscar F; Barrales Molina , Vanesa

    2011-01-01

    Abstract The importance of the Six Sigma methodology in industry is growing constantly. However, there are few empirical studies that analyze the advantages of this methodology and its positive effects on organizational performance. The purpose of this paper is to extend understanding of the success of Six Sigma quality management initiatives by investigating the effects of Six Sigma teamwork and process management on absorptive capacity. It also seeks to understand the relation be...

  15. Rib-pillar mining at Sigma Colliery

    Energy Technology Data Exchange (ETDEWEB)

    De Beer, J J.S.; Hunter, F; Neethling, A F [Sigma Colliery, Sasolburg (South Africa)

    1991-06-01

    The paper describes the rib-pillar extraction method now used at Sigma Colliery in the Orange Free State. In this method, access roadways (with a high safety factor) are developed into a block of coal suitable for total extraction; pillars that have a low safety factor are then formed and extracted immediately. The method, together with the current practices of labour management, has resulted in better utilization of the coal resources and capital, increased production and labour productivity, and improved safety. 11 figs.

  16. Euclidean supersymmetry, twisting and topological sigma models

    International Nuclear Information System (INIS)

    Hull, C.M.; Lindstroem, U.; Santos, L. Melo dos; Zabzine, M.; Unge, R. von

    2008-01-01

    We discuss two dimensional N-extended supersymmetry in Euclidean signature and its R-symmetry. For N = 2, the R-symmetry is SO(2) x SO(1, 1), so that only an A-twist is possible. To formulate a B-twist, or to construct Euclidean N = 2 models with H-flux so that the target geometry is generalised Kahler, it is necessary to work with a complexification of the sigma models. These issues are related to the obstructions to the existence of non-trivial twisted chiral superfields in Euclidean superspace.

  17. String Sigma Models on Curved Supermanifolds

    Directory of Open Access Journals (Sweden)

    Roberto Catenacci

    2018-04-01

    Full Text Available We use the techniques of integral forms to analyze the easiest example of two-dimensional sigma models on a supermanifold. We write the action as an integral of a top integral form over a D = 2 supermanifold, and we show how to interpolate between different superspace actions. Then, we consider curved supermanifolds, and we show that the definitions used for flat supermanifolds can also be used for curved supermanifolds. We prove it by first considering the case of a curved rigid supermanifold and then the case of a generic curved supermanifold described by a single superfield E.

  18. Topological sigma B model in 4-dimensions

    International Nuclear Information System (INIS)

    Jun, Hyun-Keun; Park, Jae-Suk

    2008-01-01

    We propose a 4-dimensional version of topological sigma B-model, governing maps from a smooth compact 4-manifold M to a Calabi-Yau target manifold X. The theory depends on complex structure of X, while is independent of Kaehler metric of X. The theory is also a 4-dimensional topological field theory in the sense that the theory is independent of variation of Riemannian metric of the source 4-manifold M, potentially leading to new smooth invariant of 4-manifolds. We argue that the theory also comes with a topological family parametrized by the extended moduli space of complex structures.

  19. Mucosal vaccination by adenoviruses displaying reovirus sigma 1

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, Eric A. [Department of Internal Medicine, Division of Infectious Diseases, Translational Immunovirology and Biodefense Program, Mayo Clinic, Rochester, MN 55902 (United States); Camacho, Zenaido T. [Department of Cell Biology, Department of Natural Sciences, Western New Mexico University, Silver City, NM 88062 (United States); Hillestad, Matthew L. [Nephrology Training Program, Mayo Clinic, Rochester, MN 55902 (United States); Crosby, Catherine M.; Turner, Mallory A.; Guenzel, Adam J.; Fadel, Hind J. [Virology and Gene Therapy Graduate Program, Mayo Clinic, Rochester, MN 55902 (United States); Mercier, George T. [Department of Physics, University of Houston, Houston, TX 77004 (United States); Barry, Michael A., E-mail: mab@mayo.edu [Department of Internal Medicine, Division of Infectious Diseases, Translational Immunovirology and Biodefense Program, Mayo Clinic, Rochester, MN 55902 (United States); Department of Immunology and Department of Molecular Medicine, Mayo Clinic, Rochester, MN 55902 (United States)

    2015-08-15

    We developed adenovirus serotype 5 (Ad5) vectors displaying the sigma 1 protein from reovirus as mucosal vaccines. Ad5-sigma retargets to JAM-1 and sialic acid, but has 40-fold reduced gene delivery when compared to Ad5. While weaker at transduction, Ad5-sigma generates stronger T cell responses than Ad5 when used for mucosal immunization. In this work, new Ad5-fiber-sigma vectors were generated by varying the number of fiber β-spiral shaft repeats (R) between the fiber tail and sigma. Increasing chimera length led to decreasing insertion of these proteinsAd5 virions. Ad-R3 and R14 vectors effectively targeted JAM-1 in vitro while R20 did not. When wereused to immunize mice by the intranasal route, Ad5-R3-sigma produced higher serum and vaginal antibody responses than Ad5. These data suggest optimized Ad-sigma vectors may be useful vectors for mucosal vaccination. - Highlights: • Constructed adenoviruses (Ads) displaying different reovirus sigma 1 fusion proteins. • Progressively longer chimeras were more poorly encapsidated onto Ad virions. • Ad5-R3-sigma mediated better systemic and mucosal immune responses than Ad5.

  20. Mucosal vaccination by adenoviruses displaying reovirus sigma 1

    International Nuclear Information System (INIS)

    Weaver, Eric A.; Camacho, Zenaido T.; Hillestad, Matthew L.; Crosby, Catherine M.; Turner, Mallory A.; Guenzel, Adam J.; Fadel, Hind J.; Mercier, George T.; Barry, Michael A.

    2015-01-01

    We developed adenovirus serotype 5 (Ad5) vectors displaying the sigma 1 protein from reovirus as mucosal vaccines. Ad5-sigma retargets to JAM-1 and sialic acid, but has 40-fold reduced gene delivery when compared to Ad5. While weaker at transduction, Ad5-sigma generates stronger T cell responses than Ad5 when used for mucosal immunization. In this work, new Ad5-fiber-sigma vectors were generated by varying the number of fiber β-spiral shaft repeats (R) between the fiber tail and sigma. Increasing chimera length led to decreasing insertion of these proteinsAd5 virions. Ad-R3 and R14 vectors effectively targeted JAM-1 in vitro while R20 did not. When wereused to immunize mice by the intranasal route, Ad5-R3-sigma produced higher serum and vaginal antibody responses than Ad5. These data suggest optimized Ad-sigma vectors may be useful vectors for mucosal vaccination. - Highlights: • Constructed adenoviruses (Ads) displaying different reovirus sigma 1 fusion proteins. • Progressively longer chimeras were more poorly encapsidated onto Ad virions. • Ad5-R3-sigma mediated better systemic and mucosal immune responses than Ad5

  1. Study of the reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ at 3.6 GeV/c

    CERN Document Server

    Atherton, Henry W; Moebes, J P; Quercigh, Emanuele

    1974-01-01

    The reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ are studied at an incident momentum of 3.6 GeV/c in a 35.4 event/$\\mu$ b experiment performed in the CERN 2m HBC. Total and differential cross sections are presented. The polarization of the hyperons is measured as a function of $t$ and for the reaction $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda$ the complete spin correlation matrix is given. (23 refs).

  2. Precipitation Mechanism of Sigma Phase in Super Duplex Stainless Steels

    Science.gov (United States)

    Nakade, Katsuyuki; Kuroda, Toshio

    The influence of alloying elements on the precipitation behavior of sigma (σ) phase was investigated for conventional SAF2205 and SAF2507 super duplex stainless steel. Time-Temperature-Precipitation (T-T-P) diagram of sigma phase of SAF2507 were shifted toward to shorter times compared to SAF2205. The precipitation of sigma phase was accelerated with increasing Cr and Mo concentration. According to the microstructure observation, the sigma phase began to precipitate at ferrite (α) ⁄ austenite (γ) phase boundaries and grew into ferrite for SAF2507 and SAF2205 steel. In the as-received condition, Cr and Mo concentration in ferrite was clearly higher than that in austenite. Especially, it was found that Mo concentration in ferrite of SAF2507 was higher than that in ferrite of SAF2205. The result of EPMA-measurement showed that sigma phase was mainly Fe-Cr-Mo intermetallic compound and Mo was significantly enriched into sigma phase. The difference of Mo concentration in ferrite significantly affected to the sigma phase precipitation. The secondary austenite formation was also induced by sigma phase precipitation. Cr and Mo were ejected to the remained ferrite ⁄ austenite phase boundaries by secondary austenite formation. Consequently, sigma phase precipitation was more accelerated by the reheating.

  3. Getting the sigma in the M_BH - sigma relation right

    Science.gov (United States)

    van der Marel, Roeland

    2017-08-01

    The relation between the mass of the central supermassive black hole (M_BH) and the velocity dispersion of its host spheroid (sigma) is fundamental for our understanding of galaxy evolution and its relation to their nuclei. Correspondingly many HST orbits have been invested in determining accurate M_BH masses. Surprisingly little has been done on standardizing the other axis, i.e. sigma measurements. These values are often derived from various long-slit datasets at different physical radii of the galaxy and no homogeneous definition has been given. We propose to remedy this situation by using our dataset of MUSE and PPAK kinematic maps out to 1 R_e of galaxies with a secure black hole mass. These data are useful for large scale kinematics, however, obtaining velocity dispersions at small radii is not possible. To measure velocity dispersions at small radii we require high-spatial resolution spectroscopy as provided by HST/STIS. In addtion, high-resolution photometric data is needed to define consistent apertures in each galaxy. We therefore propose to use the unique capabilities of HST and harvest years of efforts to collect archival spectroscopic and imaging data for BH host galaxies. This will allow creating a catalog of sigma values, calculated in various ways and at various radii and to re-calibrate the M_BH - sigma relation.

  4. Fuel rod fixing system

    International Nuclear Information System (INIS)

    Christiansen, D.W.

    1982-01-01

    This is a reusable system for fixing a nuclear reactor fuel rod to a support. An interlock cap is fixed to the fuel rod and an interlock strip is fixed to the support. The interlock cap has two opposed fingers, which are shaped so that a base is formed with a body part. The interlock strip has an extension, which is shaped so that this is rigidly fixed to the body part of the base. The fingers of the interlock cap are elastic in bending. To fix it, the interlock cap is pushed longitudinally on to the interlock strip, which causes the extension to bend the fingers open in order to engage with the body part of the base. To remove it, the procedure is reversed. (orig.) [de

  5. Secondary emission detectors for fixed target experiments at Fermilab

    International Nuclear Information System (INIS)

    Drucker, R.; Ford, R.; Tassotto, G.

    1998-02-01

    A description of a Secondary Emission Electron Detector (SEED) is given. The SEEDs provide accurate profiles and positions at small wire spacing (125-500 mm) in a high energy, high rate environment that exceeds the capabilities of traditional segmented wire ion chambers (SWICs). This device has been designed and constructed to monitor beam position and profile of two fixed target beamlines, namely, KTeV (FNAL E-799, E-832) with an average beam sigma at target of 0.22 mm and NuTeV (FNAL E-815) with a sigma = 0.6 mm. KTeV took beam at an intensity of up to 5E12 800 GeV protons over a 20 sec spill and NuTeV received 1E13 800 GeV protons in five pings/spill

  6. Superconducting bandpass delta-sigma modulator

    International Nuclear Information System (INIS)

    Bulzacchelli, J.F.; Lee, H.-S.; Misewich, J.A.; Ketchen, M.B.

    1999-01-01

    Bandpass delta-sigma modulators digitize narrowband signals with high dynamic range and linearity. The required sampling rate is only a few times higher than the centre frequency of the input. This paper presents a superconducting bandpass delta-sigma modulator for direct analogue-to-digital conversion of RF signals in the GHz range. The input signal is capacitively coupled to one end of a microstrip transmission line, and a single flux quantum balanced comparator quantizes the current flowing out of the other end. Quantization noise is suppressed at the quarter-wave resonance of the transmission line (about 2 GHz in our design). Circuit performance at a 20 GHz sampling rate has been studied with several long JSIM simulations. Full-scale (FS) input sensitivity is 20 mV (rms), and in-band noise is -53 dBFS and -57 dBFS over bandwidths of 39 MHz and 19.5 MHz, respectively. In-band intermodulation distortion is better than -69 dBFS. (author)

  7. Quantitative application of sigma metrics in medical biochemistry.

    Science.gov (United States)

    Nanda, Sunil Kumar; Ray, Lopamudra

    2013-12-01

    Laboratory errors are result of a poorly designed quality system in the laboratory. Six Sigma is an error reduction methodology that has been successfully applied at Motorola and General Electric. Sigma (σ) is the mathematical symbol for standard deviation (SD). Sigma methodology can be applied wherever an outcome of a process has to be measured. A poor outcome is counted as an error or defect. This is quantified as defects per million (DPM). A six sigma process is one in which 99.999666% of the products manufactured are statistically expected to be free of defects. Six sigma concentrates, on regulating a process to 6 SDs, represents 3.4 DPM (defects per million) opportunities. It can be inferred that as sigma increases, the consistency and steadiness of the test improves, thereby reducing the operating costs. We aimed to gauge performance of our laboratory parameters by sigma metrics. Evaluation of sigma metrics in interpretation of parameter performance in clinical biochemistry. The six month internal QC (October 2012 to march 2013) and EQAS (external quality assurance scheme) were extracted for the parameters-Glucose, Urea, Creatinine, Total Bilirubin, Total Protein, Albumin, Uric acid, Total Cholesterol, Triglycerides, Chloride, SGOT, SGPT and ALP. Coefficient of variance (CV) were calculated from internal QC for these parameters. Percentage bias for these parameters was calculated from the EQAS. Total allowable errors were followed as per Clinical Laboratory Improvement Amendments (CLIA) guidelines. Sigma metrics were calculated from CV, percentage bias and total allowable error for the above mentioned parameters. For parameters - Total bilirubin, uric acid, SGOT, SGPT and ALP, the sigma values were found to be more than 6. For parameters - glucose, Creatinine, triglycerides, urea, the sigma values were found to be between 3 to 6. For parameters - total protein, albumin, cholesterol and chloride, the sigma values were found to be less than 3. ALP was the best

  8. The sigma(54) regulon (sigmulon) of Pseudomonas putida

    DEFF Research Database (Denmark)

    Cases, I.; Ussery, David; de Lorenzo, V.

    2003-01-01

    , the sigma(54) regulon has been studied both in Escherichia coli, Salmonella typhimurium and several species of the Rhizobiaceae. Here we present the analysis of the sigma(54) regulon (sigmulon) in the complete genome of Pseudomonas putida KT2440. We have developed an improved method for the prediction...

  9. Sigma-1 receptor: The novel intracellular target of neuropsychotherapeutic drugs

    Directory of Open Access Journals (Sweden)

    Teruo Hayashi

    2015-01-01

    Full Text Available Sigma-1 receptor ligands have been long expected to serve as drugs for treatment of human diseases such as neurodegenerative disorders, depression, idiopathic pain, drug abuse, and cancer. Recent research exploring the molecular function of the sigma-1 receptor started unveiling underlying mechanisms of the therapeutic activity of those ligands. Via the molecular chaperone activity, the sigma-1 receptor regulates protein folding/degradation, ER/oxidative stress, and cell survival. The chaperone activity is activated or inhibited by synthetic sigma-1 receptor ligands in an agonist-antagonist manner. Sigma-1 receptors are localized at the endoplasmic reticulum (ER membranes that are physically associated with the mitochondria (MAM: mitochondria-associated ER membrane. In specific types of neurons (e.g., those at the spinal cord, sigma-1 receptors are also clustered at ER membranes that juxtapose postsynaptic plasma membranes. Recent studies indicate that sigma-1 receptors, partly in sake of its unique subcellular localization, regulate the mitochondria function that involves bioenergetics and free radical generation. The sigma-1 receptor may thus provide an intracellular drug target that enables controlling ER stress and free radical generation under pathological conditions.

  10. Inspanning om Lean Six Sigma op kaart te zetten beloond

    NARCIS (Netherlands)

    Does, R.J.M.M.

    2008-01-01

    Prof.dr. R.J.M.M. Does is al jarenlang een fervent voorvechter voor het gebruik van statistiek. En meer recent is hij zo’n beetje de belichaming van (Lean) Six Sigma in Europa. Tal van grote organisaties hebben hem te hulp geroepen bij de invoering van (Lean) Six Sigma. Het is dan ook niet meer dan

  11. Lean Six Sigma in het ziekenhuis: De beschikbaarheid van infuuspompen

    NARCIS (Netherlands)

    Does, R.J.M.M.; Kemper, B.P.H.; Koopmans, M.

    2011-01-01

    In het topklinisch ziekenhuis Medisch Spectrum Twente werd in 2008 een Lean Six Sigma-project gestart. Het doel was vermindering van operationele kosten van infuuspompen. Het is een interessant voorbeeld van Lean Six Sigma in de gezondheidszorg, omdat het laat zien dat kostenbesparing niet hoeft te

  12. Comparing nonmanufacturing with traditional applications of Six Sigma

    NARCIS (Netherlands)

    Does, R.J.M.M.; Heuvel, van den E.R.; Mast, de J.; Bisgaard, S.

    2002-01-01

    The Six Sigma approach has in the past been predominantly used to improve manufacturing processes. However, Six Sigma is now increasingly applied to a wide variety of nonmanufacturing operations also. This is an important development—there are potentially more benefits to be achieved in those areas

  13. Six sigma management and its application in nuclear power plant

    International Nuclear Information System (INIS)

    Liu Weihua; Tong Lili

    2007-01-01

    Six sigma management mode is presented. The feasibility, necessity and the steps to extend six sigma in nuclear power plant are addressed. Nuclear power plant can eliminate or decrease human errors through importing six management concept, the 'zero disfigurement' quality and operation can achieved, decreasing accident risk and realizing safety operation. (authors)

  14. A construction of observables for AKSZ sigma models

    OpenAIRE

    Mnev, Pavel

    2012-01-01

    A construction of gauge-invariant observables is suggested for a class of topological field theories, the AKSZ sigma-models. The observables are associated to extensions of the target Q-manifold of the sigma model to a Q-bundle over it with additional Hamiltonian structure in fibers.

  15. A Geographical Information System for Malaria in Colombia (SIGMA)

    International Nuclear Information System (INIS)

    Poveda, German; Hernandez, Olver; Urquijo, Lenis; Padilla Julio Cesar

    2005-01-01

    A Geographical Information System for Malaria in Colombia (SIGMA) is introduced and its capabilities and modules are described. It allows the interactive visualization of the Colombian Ministry of Social Protection database at national, regional and municipal levels and the analysis of relationships with different environmental and climatic variables. SIGMA is a powerful decision support system for human health intervention and management programs in Colombia

  16. An application of six sigma for SMEs: A case study

    Directory of Open Access Journals (Sweden)

    Prabhakar Kaushik

    2017-03-01

    Full Text Available Six Sigma is the concept of improving the quality by reducing process variations, making con-tinuous improvements, reducing defect rates and improving the processes. Initially, the concept of Six Sigma focused on defect reduction, cost reduction and value addition. Fundamentally the basic idea of Six Sigma is to improve the process-capability and making the process more relia-ble along with reducing wastes within industries. Evaluation the implication of applying Six Sigma over the small and medium-sized enterprises is the main purpose of this research work taking a particular case of automobile industries. In the present work, DMAIC methodology of Six Sigma is used to a small seat slider lock nut manufacturing unit to reduce the play issue in K2 seat slider lock in automobile units by reducing defects inherent in the process. After apply-ing Six Sigma methodology, it was found that manufacturing units could earn profits in terms of reducing the wastage as well as improving the quality standard of the product by controlling the play issue in seat slider lock nut mechanism. Result shows that with the application of Six Sig-ma, process, sigma level brought up to 5.53σ from 1.59σ by varying the seat slider lock nut di-mensions/size.

  17. Studi Implementasi Six Sigma dalam Sistem Inventori Galangan Kapal

    Directory of Open Access Journals (Sweden)

    Elwin Elwin

    2012-09-01

    Full Text Available Dalam industri galangan kapal terdapat bahan baku, barang dalam proses dan barang jadi yang merupakan macam-macam bentuk dari persediaan dan berhubungan dengan stok, ketika persediaan tidak dikelola dengan benar maka akan terjadi pembengkakkan biaya/pengeluaran biaya yang tidak dibutuhkan. Tugas akhir ini bertujuan untuk mengetahui kondisi inventori di PT. Dok dan Perkapalan Surbaya, untuk mengetahui faktor-faktor yang menjadi penyebab terjadinya variabilitas output six sigma dan mengurangi defect pada sistem inventori dengan menggunakan metode six sigma DMAIC (Define, Measure, Analyze, Improve dan Control,. Berdasarkan perhitungan Material Pipa mengalami defect sebesar 50.98% dengan nilai sigma 1.48, Material Elbow mengalami defect sebesar 89.80% dengan nilai sigma 0.33, Material Flange mengalami defect sebesar 71.99% dengan nilai sigma 0.90, Material Paking mengalami defect sebesar 13.12% dengan nilai sigma 2.74 dan Material Mur mengalami defect sebesar 17.26% dengan nilai sigma 2.57. Sesuai dengan perhitungan reorder point for the inventory untuk masing-masing material, maka dapat diketahui bahwa material Pipa reoder point adalah 58 lonjor, elbow 100 buah, flange 168 buah, paking 24 buah dan mur 946 buah. Nilai sigma yang diperoleh dalam perhitungan tingkat persediaan masih jauh dari nilai yang seharusnya dapat dicapai oleh suatu perusahaan (6σ, sehingga dilakukan tahap Improve dengan metode Failure Mode and Effect Analysis (FMEA, pembuat SOP Pengendalian persediaan material dengan format baru serta galangan perlu melakukan perhitungan reorder point.  

  18. Logistics services and Lean Six Sigma implementation: a case study

    NARCIS (Netherlands)

    Gutierrez Gutierrez, L.; de Leeuw, S.L.J.M.; Dubbers, R.

    2016-01-01

    Purpose: This paper aims to analyze the application of Lean Six Sigma (LSS) framework for supporting continuous improvement (CI) in logistics services. Both the lean philosophy and the Six Sigma methodology have become two of the most important initiatives for CI in organizations. The combination of

  19. An application of Lean Six Sigma in a hospital

    NARCIS (Netherlands)

    van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.; Anthony, J.; Kumar, M.

    2007-01-01

    Abstract Healthcare today faces major challenges. Patients demand quality of care to be improved continuously. Insurance companies demand the lowest possible prices. Lean Six Sigma is a tool that can help healthcare providers to achieve these at least partly conflicting goals. Lean Six Sigma is an

  20. Fixed automated spray technology.

    Science.gov (United States)

    2011-04-19

    This research project evaluated the construction and performance of Boschungs Fixed Automated : Spray Technology (FAST) system. The FAST system automatically sprays de-icing material on : the bridge when icing conditions are about to occur. The FA...

  1. Fixed mobile convergence handbook

    CERN Document Server

    Ahson, Syed A

    2010-01-01

    From basic concepts to future directions, this handbook provides technical information on all aspects of fixed-mobile convergence (FMC). The book examines such topics as integrated management architecture, business trends and strategic implications for service providers, personal area networks, mobile controlled handover methods, SIP-based session mobility, and supervisory and notification aggregator service. Case studies are used to illustrate technical and systematic implementation of unified and rationalized internet access by fixed-mobile network convergence. The text examines the technolo

  2. (-)PPAP: a new and selective ligand for sigma binding sites.

    Science.gov (United States)

    Glennon, R A; Battaglia, G; Smith, J D

    1990-11-01

    Most agents employed for the investigation of sigma (sigma) binding sites display relatively low affinity for these sites, bind both at sigma sites and at either phencyclidine (PCP) sites or dopamine receptors with similar affinity, and/or produce some dopaminergic activity in vivo. We describe a new agent, (-)PPAP or R(-)-N-(3-phenyl-n-propyl)-1-phenyl-2-aminopropane hydrochloride, that binds with high affinity and selectivity at sigma (IC50 = 24 nM) versus either PCP sites (IC50 greater than 75,000 nM) or D1 and D2 dopamine receptors (IC50 greater than 5,000 nM). The sigma affinity of this agent is comparable to that of the standard ligands (+)-3-PPP and DTG. Furthermore, although (-)PPAP is structurally related to amphetamine, it neither produces nor antagonizes amphetamine-like stimulus effect in rats trained to discriminate 1 mg/kg of S(+)amphetamine from saline.

  3. Lean six sigma case studies in the healthcare enterprise

    CERN Document Server

    Furterer, Sandra L

    2014-01-01

    This book provides a detailed description of how to apply Lean Six Sigma in the health care industry, with a special emphasis on process improvement and operations management in hospitals.  The book begins with a description of the Enterprise Performance Excellence (EPE) improvement methodology developed by the author that links several methodologies including systems thinking, theory of constraints, Lean and Six Sigma to provide an enterprise-wide prioritization and value-chain view of health care. The EPE methodology helps to improve flow at the macro or value-chain level, and then identifies Lean Six Sigma detailed improvements that can further improve processes within the value-chain.  The book also provides real-world health care applications of the EPE and Lean Six Sigma methodologies that showed significant results on throughput, capacity, operational and financial performance. The Enterprise Performance Excellence methodology is described, and also the Six Sigma DMAIC (Define-Measure-Analyze-Improve...

  4. Development of radiolabeled probes directed against sigma-1 receptors

    International Nuclear Information System (INIS)

    Ogawa, Kazuma; Masuda, Ryohei; Shiba, Kazuhiro

    2017-01-01

    It has been reported that sigma-1 receptors regulate the release of signaling substances in the central nervous systems and are related to various diseases, such as schizophrenia, stress disorders, dementia, amyotrophic lateral sclerosis (ALS), and cancer. If the quantification of the sigma-1 receptors is possible, the pathophysiology, the stage, and the early detection of the diseases could be understandable. Molecular imaging using Positron Emission Tomography (PET) or Single Photon Emission Computed Tomography (SPECT) and radioactive probes makes noninvasive quantification of the in vivo metabolism and function possible. Currently, only nuclear medicine diagnosis using PET or SPECT can quantify the sigma-1 receptors. Therefore, there is great expectation for the development of molecular probes to image the sigma-1 receptors specifically. In this paper, we introduce our research on the development of radiohalogen-labeled molecular probes directed against the sigma-1 receptors. (author)

  5. Nambu sigma model and effective membrane actions

    Energy Technology Data Exchange (ETDEWEB)

    Jurco, Branislav, E-mail: jurco@karlin.mff.cuni.cz [Mathematical Institute, Charles University, Prague 186 75 (Czech Republic); Schupp, Peter, E-mail: p.schupp@jacobs-university.de [Jacobs University Bremen, 28759 Bremen (Germany); Maxwell Institute for Mathematical Sciences, Heriot-Watt University, Edinburgh, EH14 4AS, Scotland (United Kingdom)

    2012-07-09

    We propose an effective action for a p{sup Prime }-brane with open p-branes ending on it. The action has dual descriptions similar to the commutative and non-commutative ones of the DBI action for D-branes and open strings. The Poisson structure governing the non-commutativity of the D-brane is replaced by a Nambu structure and the open-closed string relations are generalized to the case of p-branes utilizing a novel Nambu sigma model description of p-branes. In the case of an M5-brane our action interpolates between M5-actions already proposed in the literature and matrix-model like actions involving Nambu structures.

  6. Nambu sigma model and effective membrane actions

    International Nuclear Information System (INIS)

    Jurčo, Branislav; Schupp, Peter

    2012-01-01

    We propose an effective action for a p ′ -brane with open p-branes ending on it. The action has dual descriptions similar to the commutative and non-commutative ones of the DBI action for D-branes and open strings. The Poisson structure governing the non-commutativity of the D-brane is replaced by a Nambu structure and the open-closed string relations are generalized to the case of p-branes utilizing a novel Nambu sigma model description of p-branes. In the case of an M5-brane our action interpolates between M5-actions already proposed in the literature and matrix-model like actions involving Nambu structures.

  7. Potentialities of a new sigma(+)-sigma(-)laser configuration for radiative cooling and trapping

    Energy Technology Data Exchange (ETDEWEB)

    Dalibard, J; Reynaud, S; Cohen-Tannoudji, C

    1984-11-28

    In the process of cooling and trapping neutral atoms, a new laser configuration is investigated which consists of two counterpropagating laser beams with orthogonal sigma(+) and sigma(-)polarizations. It is shown that such a configuration looks more promising than an ordinary standing wave (where the two counterpropagating waves have the same polarization), and this result is explained as being due to angular momentum conservation which prevents any coherent redistribution of photons between the two waves. The present conclusions are based on a quantitative calculation of the various parameters (potential depth, friction coefficient, diffusion coefficient) describing the mean value and the fluctuations of the radiative forces experienced, in such a laser configuration, by an atom with a J 0 ground state and a J 1 excited state. 30 references.

  8. Production of the $\\Sigma^0_c$ and $\\Sigma^{++}_c$ by High-Energy Neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Ladbury, Raymond, Jr. [Colorado U.

    1988-01-01

    We present the first observation of hadroproduction of the $\\Sigma^{++}_C$ and $\\Sigma^0_c$ , decaying into $\\Lambda_{c\\pi}$. The daughter $\\Lambda_c$ is observed in the decay modes $pK \\pi$ and $pK_s\\pi\\pi$. The Experiment was conducted at a broadband neutron beam in the Proton East area of the Fermi National Accelerator Laboratory. A two - magnet multiparticle spectrometer equipped with proportional wire chambers and a high resolution MWPC vertex detector was used to momentum analyze charged particles produced in the interactions of neutrons on targets of beryllium, silicon and tungsten. Particles were identified using three Cerenkov counters. The beam energy for each event was reconstructed using hadronic and electromagnetic calorimetry....

  9. Non Abelian T-duality in Gauged Linear Sigma Models

    Science.gov (United States)

    Bizet, Nana Cabo; Martínez-Merino, Aldo; Zayas, Leopoldo A. Pando; Santos-Silva, Roberto

    2018-04-01

    Abelian T-duality in Gauged Linear Sigma Models (GLSM) forms the basis of the physical understanding of Mirror Symmetry as presented by Hori and Vafa. We consider an alternative formulation of Abelian T-duality on GLSM's as a gauging of a global U(1) symmetry with the addition of appropriate Lagrange multipliers. For GLSMs with Abelian gauge groups and without superpotential we reproduce the dual models introduced by Hori and Vafa. We extend the construction to formulate non-Abelian T-duality on GLSMs with global non-Abelian symmetries. The equations of motion that lead to the dual model are obtained for a general group, they depend in general on semi-chiral superfields; for cases such as SU(2) they depend on twisted chiral superfields. We solve the equations of motion for an SU(2) gauged group with a choice of a particular Lie algebra direction of the vector superfield. This direction covers a non-Abelian sector that can be described by a family of Abelian dualities. The dual model Lagrangian depends on twisted chiral superfields and a twisted superpotential is generated. We explore some non-perturbative aspects by making an Ansatz for the instanton corrections in the dual theories. We verify that the effective potential for the U(1) field strength in a fixed configuration on the original theory matches the one of the dual theory. Imposing restrictions on the vector superfield, more general non-Abelian dual models are obtained. We analyze the dual models via the geometry of their susy vacua.

  10. Application of Six Sigma towards improving surgical outcomes.

    Science.gov (United States)

    Shukla, P J; Barreto, S G; Nadkarni, M S

    2008-01-01

    Six Sigma is a 'process excellence' tool targeting continuous improvement achieved by providing a methodology for improving key steps of a process. It is ripe for application into health care since almost all health care processes require a near-zero tolerance for mistakes. The aim of this study is to apply the Six Sigma methodology into a clinical surgical process and to assess the improvement (if any) in the outcomes and patient care. The guiding principles of Six Sigma, namely DMAIC (Define, Measure, Analyze, Improve, Control), were used to analyze the impact of double stapling technique (DST) towards improving sphincter preservation rates for rectal cancer. The analysis using the Six Sigma methodology revealed a Sigma score of 2.10 in relation to successful sphincter preservation. This score demonstrates an improvement over the previous technique (73% over previous 54%). This study represents one of the first clinical applications of Six Sigma in the surgical field. By understanding, accepting, and applying the principles of Six Sigma, we have an opportunity to transfer a very successful management philosophy to facilitate the identification of key steps that can improve outcomes and ultimately patient safety and the quality of surgical care provided.

  11. Non-perturbative aspects of nonlinear sigma models

    Energy Technology Data Exchange (ETDEWEB)

    Flore, Raphael

    2012-12-07

    The aim of this thesis was the study and further development of non-perturbative methods of quantum field theory by means of their application to nonlinear sigma models. While a large part of the physical phenomena of quantum field theory can be successfully predicted by the perturbation theory, some aspects in the region of large coupling strengths are not definitively understood and require suited non-perturbative methods for its analysis. This thesis is concentrated on two approaches, the numerical treatment of field theories on discrete space-time lattices and the functional renormalization group (FRG) as description of the renormalization flux of effective actions. Considerations of the nonlinear O(N) models have shown that for the correct analysis of the critical properties in the framework of the FRG an approach must be chosen, which contained fourth-derivation orders. For this a covariant formalism was developed, which is based on a background-field expansion and the development of a heat kernel. Apart from a destabilizing coupling the results suggest a nontrivial fixed point and by this a non-perturbative renormalizability of these models. The resulting flow diagrams were finally still compared with the results of a numerical analysis of the renormalization flow by means of the Monte-Carlo renormalization group, and hereby qualitative agreement was found. Furthermore an alternative formulation of the FRG in phase-space coordinates was studied and their consistency tested on simple examples. Beyond this an alternative expansion of the effective action in orders of the canonical momenta was applied to the nonlinear O(N) models with the result of a stable non-trivial fixed point, the critical properties of which however show not the expected N-dependence. By means of the FRG finally still the renormalization of topological operators was studied by means of the winding number of the O(3){approx_equal}CP{sup 1} model. By the generalization of the topological

  12. Non-perturbative aspects of nonlinear sigma models

    International Nuclear Information System (INIS)

    Flore, Raphael

    2012-01-01

    The aim of this thesis was the study and further development of non-perturbative methods of quantum field theory by means of their application to nonlinear sigma models. While a large part of the physical phenomena of quantum field theory can be successfully predicted by the perturbation theory, some aspects in the region of large coupling strengths are not definitively understood and require suited non-perturbative methods for its analysis. This thesis is concentrated on two approaches, the numerical treatment of field theories on discrete space-time lattices and the functional renormalization group (FRG) as description of the renormalization flux of effective actions. Considerations of the nonlinear O(N) models have shown that for the correct analysis of the critical properties in the framework of the FRG an approach must be chosen, which contained fourth-derivation orders. For this a covariant formalism was developed, which is based on a background-field expansion and the development of a heat kernel. Apart from a destabilizing coupling the results suggest a nontrivial fixed point and by this a non-perturbative renormalizability of these models. The resulting flow diagrams were finally still compared with the results of a numerical analysis of the renormalization flow by means of the Monte-Carlo renormalization group, and hereby qualitative agreement was found. Furthermore an alternative formulation of the FRG in phase-space coordinates was studied and their consistency tested on simple examples. Beyond this an alternative expansion of the effective action in orders of the canonical momenta was applied to the nonlinear O(N) models with the result of a stable non-trivial fixed point, the critical properties of which however show not the expected N-dependence. By means of the FRG finally still the renormalization of topological operators was studied by means of the winding number of the O(3)≅CP 1 model. By the generalization of the topological operator and the

  13. vmPFC activation during a stressor predicts positive emotions during stress recovery

    Science.gov (United States)

    Yang, Xi; Garcia, Katelyn M; Jung, Youngkyoo; Whitlow, Christopher T; McRae, Kateri; Waugh, Christian E

    2018-01-01

    Abstract Despite accruing evidence showing that positive emotions facilitate stress recovery, the neural basis for this effect remains unclear. To identify the underlying mechanism, we compared stress recovery for people reflecting on a stressor while in a positive emotional context with that for people in a neutral context. While blood–oxygen-level dependent data were being collected, participants (N = 43) performed a stressful anagram task, which was followed by a recovery period during which they reflected on the stressor while watching a positive or neutral video. Participants also reported positive and negative emotions throughout the task as well as retrospective thoughts about the task. Although there was no effect of experimental context on emotional recovery, we found that ventromedial prefrontal cortex (vmPFC) activation during the stressor predicted more positive emotions during recovery, which in turn predicted less negative emotions during recovery. In addition, the relationship between vmPFC activation and positive emotions during recovery was mediated by decentering—the meta-cognitive detachment of oneself from one’s feelings. In sum, successful recovery from a stressor seems to be due to activation of positive emotion-related regions during the stressor itself as well as to their downstream effects on certain cognitive forms of emotion regulation. PMID:29462404

  14. Investigation of lithium PFC surface characteristics and low recycling at LTX/LTX-Beta

    Science.gov (United States)

    Maan, Anurag; Kaita, Robert; Elliott, Drew; Boyle, Dennis; Majeski, Richard; Donovan, David; Buzi, Luxherta; Koel, Bruce E.; Biewer, Theodore M.

    2017-10-01

    Lithium coatings on high-Z PFCs at LTX have led to improved plasma performance. The initial hypothesis was that lithium retains hydrogen by forming lithium hydride and thereby enabling low recycling in LTX. However, recent in-vacuo measurements indicate the presence of lithium oxide in deposited lithium coatings. Improved plasma performance continued to be observed in the presence of lithium oxide. These observations raise questions like what is the nature of the lithium oxide surface, whether the PFC is an amorphous mixture of lithium and lithium oxide or something more ordered like a lithium oxide layer growing on top of lithium, and whether lithium oxide is responsible for any retention of hydrogen from the plasma. To investigate the mechanism by which the LTX PFC might be responsible for low recycling, we discuss the results of deuterium retention measurements using NRA/RBS and sample characterization using high resolution XPS (HR-XPS) in bulk lithium samples. Baseline HR-XPS scans indicate the presence of Lithium Oxide on sputtered lithium samples. Status of related planned experiments at LTX- β will also be discussed. This work was supported by the US. D.O.E. contract DE-AC05-00OR22725 and DE-AC02-09CH11466. BEK acknowledges support of this work by the U.S. DOE, Office of Science/FES under Award Number DE-SC0012890.

  15. An isolated bridgeless AC-DC PFC converter using a LC resonant voltage doubler rectifier

    Science.gov (United States)

    Lee, Sin-woo; Do, Hyun-Lark

    2016-12-01

    This paper proposed an isolated bridgeless AC-DC power factor correction (PFC) converter using a LC resonant voltage doubler rectifier. The proposed converter is based on isolated conventional single-ended primary inductance converter (SEPIC) PFC converter. The conduction loss of rectification is reduced than a conventional one because the proposed converter is designed to eliminate a full-bridge rectifier at an input stage. Moreover, for zero-current switching (ZCS) operation and low voltage stresses of output diodes, the secondary of the proposed converter is designed as voltage doubler with a LC resonant tank. Additionally, an input-output electrical isolation is provided for safety standard. In conclusion, high power factor is achieved and efficiency is improved. The operational principles, steady-state analysis and design equations of the proposed converter are described in detail. Experimental results from a 60 W prototype at a constant switching frequency 100 kHz are presented to verify the performance of the proposed converter.

  16. Sigma A recognition sites in the Bacillus subtilis genome

    DEFF Research Database (Denmark)

    Jarmer, Hanne Østergaard; Larsen, Thomas Schou; Krogh, Anders Stærmose

    2001-01-01

    A hidden Markov model of sigma (A) RNA polymerase cofactor recognition sites in Bacillus subtilis, containing either the common or the extended -10 motifs, has been constructed based on experimentally verified sigma (A) recognition sites. This work suggests that more information exists...... at the initiation site of transcription in both types of promoters than previously thought. When tested on the entire B. subtilis genome, the model predicts that approximately half of the sigma (A) recognition sites are of the extended type. Some of the response-regulator aspartate phosphatases were among...

  17. Sigma: Web Retrieval Interface for Nuclear Reaction Data

    International Nuclear Information System (INIS)

    Pritychenko, B.; Sonzogni, A.A.

    2008-01-01

    The authors present Sigma, a Web-rich application which provides user-friendly access in processing and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The main interface includes browsing using a periodic table and a directory tree, basic and advanced search capabilities, interactive plots of cross sections, angular distributions and spectra, comparisons between evaluated and experimental data, computations between different cross section sets. Interactive energy-angle, neutron cross section uncertainties plots and visualization of covariance matrices are under development. Sigma is publicly available at the National Nuclear Data Center website at www.nndc.bnl.gov/sigma

  18. 6 Sigma DFSS technique which is easy to use

    International Nuclear Information System (INIS)

    2002-01-01

    This book gives descriptions of 6 sigma DFSS technique. The contents of this book are storm of change, way of problem and solution, importance of customer satisfaction, quality improvement is key of customer satisfaction, quality improvement equals cost cutting, quality aim in perfect level, finding basic cause, data is life, standardization is fundamentals of all activity for improvement, chief, Chang's house, collection of data, setting goal to improve, experiment is the best way, importance of the last step, x control power of 6 sigma and Let's go six-sigma.

  19. Dissipative quantum dynamics and nonlinear sigma-model

    International Nuclear Information System (INIS)

    Tarasov, V.E.

    1992-01-01

    Sedov variational principle which is the generalization of the least action principle for the dissipative and irreversible processes and the classical dissipative mechanics in the phase space is considered. Quantum dynamics for the dissipative and irreversible processes is constructed. As an example of the dissipative quantum theory the nonlinear two-dimensional sigma-model is considered. The conformal anomaly of the energy momentum tensor trace for closed bosonic string on the affine-metric manifold is investigated. The two-loop metric beta-function for nonlinear dissipative sigma-model was calculated. The results are compared with the ultraviolet two-loop conterterms for affine-metric sigma model. 71 refs

  20. 5-HT2a receptor in mPFC influences context-guided reconsolidation of object memory in perirhinal cortex

    Science.gov (United States)

    Morici, Juan Facundo; Miranda, Magdalena; Gallo, Francisco Tomás; Zanoni, Belén; Bekinschtein, Pedro

    2018-01-01

    Context-dependent memories may guide adaptive behavior relaying in previous experience while updating stored information through reconsolidation. Retrieval can be triggered by partial and shared cues. When the cue is presented, the most relevant memory should be updated. In a contextual version of the object recognition task, we examined the effect of medial PFC (mPFC) serotonin 2a receptor (5-HT2aR) blockade during retrieval in reconsolidation of competing objects memories. We found that mPFC 5-HT2aR controls retrieval and reconsolidation of object memories in the perirhinal cortex (PRH), but not in the dorsal hippocampus in rats. Also, reconsolidation of objects memories in PRH required a functional interaction between the ventral hippocampus and the mPFC. Our results indicate that in the presence of conflicting information at retrieval, mPFC 5-HT2aR may facilitate top-down context-guided control over PRH to control the behavioral response and object memory reconsolidation. PMID:29717980

  1. Least fixed points revisited

    NARCIS (Netherlands)

    J.W. de Bakker (Jaco)

    1975-01-01

    textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

  2. Characterizing fixed points

    Directory of Open Access Journals (Sweden)

    Sanjo Zlobec

    2017-04-01

    Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

  3. Sigma-1 receptor and inflammatory pain.

    Science.gov (United States)

    Gris, Georgia; Cobos, Enrique José; Zamanillo, Daniel; Portillo-Salido, Enrique

    2015-06-01

    The sigma-1 receptor (Sig-1R) is a unique ligand-regulated molecular chaperone that interacts with several protein targets such as G protein-coupled receptors and ion channels to modulate their activity. Sig-1R is located in areas of the central and peripheral nervous system that are key to pain control. Previous preclinical studies have suggested a potential therapeutic use of Sig-1R antagonists for the management of neuropathic pain. Recent studies using pharmacological and genetic tools have explored the role of Sig-1R in inflammatory pain conditions. Mice lacking the Sig-1R have shown different patterns of phenotypic responses to inflammatory injury. Systemic or peripheral administration of several Sig-1R antagonists, including the selective Sig-1R antagonist S1RA, inhibited both mechanical and thermal hypersensitivity in several preclinical models of inflammatory pain. These recent studies are summarized in the present commentary. Central and peripheral pharmacological blockade of Sig-1R could be an effective option to treat inflammatory pain.

  4. Sigma Routing Metric for RPL Protocol

    Directory of Open Access Journals (Sweden)

    Paul Sanmartin

    2018-04-01

    Full Text Available This paper presents the adaptation of a specific metric for the RPL protocol in the objective function MRHOF. Among the functions standardized by IETF, we find OF0, which is based on the minimum hop count, as well as MRHOF, which is based on the Expected Transmission Count (ETX. However, when the network becomes denser or the number of nodes increases, both OF0 and MRHOF introduce long hops, which can generate a bottleneck that restricts the network. The adaptation is proposed to optimize both OFs through a new routing metric. To solve the above problem, the metrics of the minimum number of hops and the ETX are combined by designing a new routing metric called SIGMA-ETX, in which the best route is calculated using the standard deviation of ETX values between each node, as opposed to working with the ETX average along the route. This method ensures a better routing performance in dense sensor networks. The simulations are done through the Cooja simulator, based on the Contiki operating system. The simulations showed that the proposed optimization outperforms at a high margin in both OF0 and MRHOF, in terms of network latency, packet delivery ratio, lifetime, and power consumption.

  5. Establishing a Lean Six Sigma Program in Higher Education

    KAUST Repository

    Svensson, Carsten; Baessa, Mohamed A.; Bakhsh, Majed M.

    2013-01-01

    Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  6. Sphaleron in a non-linear sigma model

    International Nuclear Information System (INIS)

    Sogo, Kiyoshi; Fujimoto, Yasushi.

    1989-08-01

    We present an exact classical saddle point solution in a non-linear sigma model. It has a topological charge 1/2 and mediates the vacuum transition. The quantum fluctuations and the transition rate are also examined. (author)

  7. On D-branes from gauged linear sigma models

    International Nuclear Information System (INIS)

    Govindarajan, S.; Jayaraman, T.; Sarkar, T.

    2001-01-01

    We study both A-type and B-type D-branes in the gauged linear sigma model by considering worldsheets with boundary. The boundary conditions on the matter and vector multiplet fields are first considered in the large-volume phase/non-linear sigma model limit of the corresponding Calabi-Yau manifold, where we find that we need to add a contact term on the boundary. These considerations enable to us to derive the boundary conditions in the full gauged linear sigma model, including the addition of the appropriate boundary contact terms, such that these boundary conditions have the correct non-linear sigma model limit. Most of the analysis is for the case of Calabi-Yau manifolds with one Kaehler modulus (including those corresponding to hypersurfaces in weighted projective space), though we comment on possible generalisations

  8. Quality and Competitiveness: A Lean Six Sigma Approach

    Directory of Open Access Journals (Sweden)

    Irina-Virginia Drăgulănescu

    2015-11-01

    Full Text Available Originally developed to improve the quality and production efficiency, Lean Six Sigma is now widely adopted in other non-manufacturing sectors such as financial, trade, services, etc. The methodology known as Lean Six Sigma combines the Six Sigma techniques, ‒ which allow companies to reduce manufacturing defects ‒ and the Lean Manufacturing principles, ‒ which help companies benefit from faster processing for lower costs and with superior quality. As a result of the research, the authors observed that, despite growing popularity and impressive outcomes obtained by some companies, the Lean Six Sigma model does not always offer the expected results. However, the research has shown that the analysed company, operating in the field of courier services has managed to boost productivity and competitiveness by implementing measures that generated added value.

  9. The Role of Sigma Receptor in Breast Cancer

    National Research Council Canada - National Science Library

    Pusztai, Lajos

    2004-01-01

    We have completed specific tasks #1 and #2. Sigma 1 receptor (Sig 1 R) mRNA expression was examined in 109 human tissue specimens including normal breast, hyperplasia, ductal carcinoma in situ, and invasive cancer...

  10. Establishing a Lean Six Sigma Program in Higher Education

    KAUST Repository

    Svensson, Carsten

    2013-09-12

    Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  11. In search of Six Sigma in Portuguese SMEs

    OpenAIRE

    Fonseca, Luis Miguel

    2017-01-01

    This exploratory research aims to study the reasons for the low implementation level of Six Sigma within Portuguese Small and Medium Enterprises. The results suggest that ISO 9001 certification, and Lean Management, are still regarded as enough for company success. The descriptive analysis and the statistical tests performed led to the conclusion that there are no significant differences for the motivations not to implement Six Sigma between small and medium companies. The qualitative researc...

  12. Four dimensional sigma model coupled to the metric tensor field

    International Nuclear Information System (INIS)

    Ghika, G.; Visinescu, M.

    1980-02-01

    We discuss the four dimensional nonlinear sigma model with an internal O(n) invariance coupled to the metric tensor field satisfying Einstein equations. We derive a bound on the coupling constant between the sigma field and the metric tensor using the theory of harmonic maps. A special attention is paid to Einstein spaces and some new explicit solutions of the model are constructed. (author)

  13. Six sigma critical success factors in manufacturing industries

    Science.gov (United States)

    Mustafa, Zainol; Jamaluddin, Z.

    2017-04-01

    The success of Six Sigma implementation is known to depend on a number of contributing factors. The purpose of this paper is to explore Six Sigma critical success factors (CSFs) in the context of Malaysian manufacturing organizations. Although Six Sigma success factors have been abundantly researched in the global context, in this paper, a maiden attempt is made to identify, through an extensive literature review, the CSFs for Six Sigma implementation followed by their validation using primary data collection from Malaysian manufacturing companies. A total of 33 indicators have thus been compiled through an extensive literature review which then been grouped into 6 contributing factors. These contributing success factors are then validated through an empirical research of selected Malaysian manufacturing companies at various stages of implementation of the Six Sigma process improvement methodology. There has been an overemphasis on the role and commitment of the management in the success of a Six Sigma program. Though it is undoubted, certain other factors also play an equally important role in ensuring that the Six Sigma programs are successful. The factor analysis of CSFs of the Malaysian manufacturing organizations selected in this study demonstrates that the top factor is a composite factor showing combination of the ability of the project teams to use the process management on quality initiative and a training using a proper analysis in problem solving. The CSFs extracted through the factor analysis could provide a basis for manufacturing organizations embarking on the Six Sigma journey to look beyond just management involvement. Thus, one can develop an integrated framework of other factors as outlined and give them appropriate priority and focus.

  14. Kinetics of sigma phase formation in a Duplex Stainless Steel

    Directory of Open Access Journals (Sweden)

    Rodrigo Magnabosco

    2009-09-01

    Full Text Available This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS, describing the phase transformations that occur in isothermal aging between 700 and 900 ºC for time periods up to 1032 hours, allowing the determination of the Time-Temperature-Precipitation (TTP diagram for sigma phase and proposing a model to predict the kinetics of sigma phase formation using a Johnson-Mehl-Avrami (JMA type expression. The higher kinetics of sigma phase formation occurs at 850 ºC. However, isothermal aging between 700 and 900 ºC for time periods up to 1032 hours are not sufficient to the establishment of thermodynamic equilibrium. Activation energy for both nucleation and growth of sigma phase is determined (185 kJ.mol-1 and its value is equivalent to the activation energy for Cr diffusion in ferrite, indicating that diffusion of Cr is probably the major thermally activated process involved in sigma phase formation. The determined JMA type expression presents good fit with experimental data between 700 and 850 ºC.

  15. Success of manufacturing industries – Role of Six Sigma

    Directory of Open Access Journals (Sweden)

    Venkatesh N.

    2018-01-01

    Full Text Available Six Sigma is a phenomenal quality management concepts which has helped many organizations to overcome quality crisis in the recent past. Six Sigma is observed as a very promising quality management tool for any organization to make its presence felt in the corporate world as it emphasizes on obtaining a fruitful solution to improve accuracy, reduce defect thereby reduce the cost and improve profits. The main objective of this investigation is to unearth the extent to which the companies have been benefitted due to Six Sigma implementation. This article presents the results based on the analysis of collective opinion of employees of various Indian manufacturing industries that have implemented Six Sigma. This research also examines interrelationship among various parameters defined in the research. The research revealed that industries are benefitted irrespective of their nature in terms of their growth, financial benefits, productivity and satisfaction of the customer. However, peoples’ equity that deals with the benefits that employees obtain after Six Sigma implementation is not certain. The research also revealed the existence of strong interrelationship among various parameters used to measure the success of Six Sigma.

  16. Lean sigma--will it work for healthcare?

    Science.gov (United States)

    Bahensky, James A; Roe, Janet; Bolton, Romy

    2005-01-01

    The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

  17. Six Sigma Project Selection Using Fuzzy TOPSIS Decision Making Approach

    Directory of Open Access Journals (Sweden)

    Rajeev Rathi

    2015-05-01

    Full Text Available Six Sigma is considered as a logical business strategy that attempts to identify and eliminate the defects or failures for improving the quality of product and processes. A decision on project selection in Six Sigma is always very critical; it plays a key role in successful implementation of Six Sigma. Selection of a right Six Sigma project is essentially important for an automotive company because it greatly influences the manufacturing costs. This paper discusses an approach for right Six Sigma project selection at an automotive industry using fuzzy logic based TOPSIS method. The fuzzy TOPSIS is a well recognized tool to undertake the fuzziness of the data involved in choosing the right preferences. In this context, evaluation criteria have been designed for selection of best alternative. The weights of evaluation criteria are calculated by using the MDL (modified digital logic method and final ranking is calculated through priority index obtained by using fuzzy TOPSIS method. In the selected case study, this approach has rightly helped to identify the right project for implementing Six Sigma for achieving improvement in productivity.

  18. A Single Phase to Three Phase PFC Half-Bridge Converter Using BLDC Drive with SPWM Technique.

    OpenAIRE

    Srinu Duvvada; Manmadha Kumar B

    2014-01-01

    In this paper, a buck half-bridge DC-DC converter is used as a single-stage power factor correction (PFC) converter for feeding a voltage source inverter (VSI) based permanent magnet brushless DC motor (BLDC) drive. The front end of this PFC converter is a diode bridge rectifier (DBR) fed from single-phase AC mains. The BLDC is used to drive a compressor load of an air conditioner through a three-phase VSI fed from a controlled DC link voltage. The speed of the compressor is controlled to ach...

  19. A Comparison between Boundary and Continuous Conduction Modes in Single Phase PFC Using 600V Range Devices

    DEFF Research Database (Denmark)

    Hernandez Botella, Juan Carlos; Petersen, Lars Press; Andersen, Michael A. E.

    2015-01-01

    This paper presents an analysis and comparison of boundary conduction mode (BCM) and continuous conduction mode (CCM) in single phase power factor correction (PFC) applications. The comparison is based on double pulse tester (DPT) characterization results of state-of-the-art superjunction devices...... in the 600V range. The measured switching energy is used to evaluate the devices performance in a conventional PFC. This data is used together with a mathematical model for prediction of the conducted electromagnetic interference (EMI). This allows comparing the different devices in BCM and CCM operation...

  20. Vilified and Fixed

    DEFF Research Database (Denmark)

    Jensen, Thessa; Westberg, Lysa

    , and imbalances of power between scholars and journalists on one side, and fans on the other are not rare occurrences. An analysis of a number of recent news articles, scholarly works, and websites, shows how the attempt of fixing fandom still prevails. Like Said's view on how the Orient is treated, fandom...... and tween website", 'Teen' managed to outrage fans. It took days and hundreds of comments, tweets, and mails to the publishers, before the article was taken down. Vilification in scholarly works and the media may have significantly lessened in recent years. Still, misunderstandings, applied exoticism...... is similarly exotisised, incorporated, and fixed. Scholars explain how to become better fans, attempting authority over fandom by applying rules to a culture, which already has their own. This, the notion of the 'better fan', devalues the existing discourses, rules, and traditions within fandom. The expert...

  1. Lithium vapor trapping at a high-temperature lithium PFC divertor target

    Science.gov (United States)

    Jaworski, Michael; Abrams, T.; Goldston, R. J.; Kaita, R.; Stotler, D. P.; de Temmerman, G.; Scholten, J.; van den Berg, M. A.; van der Meiden, H. J.

    2014-10-01

    Liquid lithium has been proposed as a novel plasma-facing material for NSTX-U and next-step fusion devices but questions remain on the ultimate temperature limits of such a PFC during plasma bombardment. Lithium targets were exposed to high-flux plasma bombardment in the Magnum-PSI experimental device resulting in a temperature ramp from room-temperature to above 1200°C. A stable lithium vapor cloud was found to form directly in front of the target and persist to temperature above 1000°C. Consideration of mass and momentum balance in the pre-sheath region of an attached plasma indicates an increase in the magnitude of the pre-sheath potential drop with the inclusion of ionization sources as well as the inclusion of momentum loss terms. The low energy of lithium emission from a surface measured in previous experiments (Contract DE-AC02-09CH11466.

  2. Can tokamaks PFC survive a single event of any plasma instabilities?

    Energy Technology Data Exchange (ETDEWEB)

    Hassanein, A., E-mail: hassanein@purdue.edu [Center for Materials under Extreme Environment, School of Nuclear Engineering, Purdue University, 400 Central Drive, West Lafayette, IN 47907 (United States); Sizyuk, V.; Miloshevsky, G.; Sizyuk, T. [Center for Materials under Extreme Environment, School of Nuclear Engineering, Purdue University, 400 Central Drive, West Lafayette, IN 47907 (United States)

    2013-07-15

    Plasma instability events such as disruptions, edge-localized modes (ELMs), runaway electrons (REs), and vertical displacement events (VDEs) are continued to be serious events and most limiting factors for successful tokamak reactor concept. The plasma-facing components (PFCs), e.g., wall, divertor, and limited surfaces of a tokamak as well as coolant structure materials are subjected to intense particle and heat loads and must maintain a clean and stable surface environment among them and the core/edge plasma. Typical ITER transient events parameters are used for assessing the damage from these four different instability events. HEIGHTS simulation showed that a single event of a disruption, giant ELM, VDE, or RE can cause significant surface erosion (melting and vaporization) damage to PFC, nearby components, and/or structural materials (VDE, RE) melting and possible burnout of coolant tubes that could result in shut down of reactor for extended repair time.

  3. Can tokamaks PFC survive a single event of any plasma instabilities?

    Science.gov (United States)

    Hassanein, A.; Sizyuk, V.; Miloshevsky, G.; Sizyuk, T.

    2013-07-01

    Plasma instability events such as disruptions, edge-localized modes (ELMs), runaway electrons (REs), and vertical displacement events (VDEs) are continued to be serious events and most limiting factors for successful tokamak reactor concept. The plasma-facing components (PFCs), e.g., wall, divertor, and limited surfaces of a tokamak as well as coolant structure materials are subjected to intense particle and heat loads and must maintain a clean and stable surface environment among them and the core/edge plasma. Typical ITER transient events parameters are used for assessing the damage from these four different instability events. HEIGHTS simulation showed that a single event of a disruption, giant ELM, VDE, or RE can cause significant surface erosion (melting and vaporization) damage to PFC, nearby components, and/or structural materials (VDE, RE) melting and possible burnout of coolant tubes that could result in shut down of reactor for extended repair time.

  4. Can tokamaks PFC survive a single event of any plasma instabilities?

    International Nuclear Information System (INIS)

    Hassanein, A.; Sizyuk, V.; Miloshevsky, G.; Sizyuk, T.

    2013-01-01

    Plasma instability events such as disruptions, edge-localized modes (ELMs), runaway electrons (REs), and vertical displacement events (VDEs) are continued to be serious events and most limiting factors for successful tokamak reactor concept. The plasma-facing components (PFCs), e.g., wall, divertor, and limited surfaces of a tokamak as well as coolant structure materials are subjected to intense particle and heat loads and must maintain a clean and stable surface environment among them and the core/edge plasma. Typical ITER transient events parameters are used for assessing the damage from these four different instability events. HEIGHTS simulation showed that a single event of a disruption, giant ELM, VDE, or RE can cause significant surface erosion (melting and vaporization) damage to PFC, nearby components, and/or structural materials (VDE, RE) melting and possible burnout of coolant tubes that could result in shut down of reactor for extended repair time

  5. POLARIMETRIC OBSERVATIONS OF {sigma} ORIONIS E

    Energy Technology Data Exchange (ETDEWEB)

    Carciofi, A. C.; Faes, D. M. [Instituto de Astronomia, Geofisica e Ciencias Atmosfericas, Universidade de Sao Paulo, Rua do Matao 1226, Cidade Universitaria, 05508-900 Sao Paulo, SP (Brazil); Townsend, R. H. D. [Department of Astronomy, University of Wisconsin-Madison, Sterling Hall, 475 N. Charter Street, Madison, WI 53706 (United States); Bjorkman, J. E., E-mail: carciofi@usp.br [Ritter Observatory, Department of Physics and Astronomy, University of Toledo, Toledo, OH 43606 (United States)

    2013-03-20

    Some massive stars possess strong magnetic fields that confine plasma in the circumstellar environment. These magnetospheres have been studied spectroscopically, photometrically, and, more recently, interferometrically. Here we report on the first firm detection of a magnetosphere in continuum linear polarization, as a result of monitoring {sigma} Ori E at the Pico dos Dias Observatory. The non-zero intrinsic polarization indicates an asymmetric structure whose minor elongation axis is oriented 150. Degree-Sign 0 east of the celestial north. A modulation of the polarization was observed with a period of half of the rotation period, which supports the theoretical prediction of the presence of two diametrally opposed, corotating blobs of gas. A phase lag of -0.085 was detected between the polarization minimum and the primary minimum of the light curve, suggestive of a complex shape of the plasma clouds. We present a preliminary analysis of the data with the Rigidly Rotating Magnetosphere model, which could not reproduce simultaneously the photometric and polarimetric data. A toy model comprising two spherical corotating blobs joined by a thin disk proved more successful in reproducing the polarization modulation. With this model we were able to determine that the total scattering mass of the thin disk is similar to the mass of the blobs (2M{sub b}/M{sub d} = 1.2) and that the blobs are rotating counterclockwise on the plane of the sky. This result shows that polarimetry can provide a diagnostic of the geometry of clouds, which will serve as an important constraint for improving the Rigidly Rotating Magnetosphere model.

  6. Chronic LSD alters gene expression profiles in the mPFC relevant to schizophrenia.

    Science.gov (United States)

    Martin, David A; Marona-Lewicka, Danuta; Nichols, David E; Nichols, Charles D

    2014-08-01

    Chronic administration of lysergic acid diethylamide (LSD) every other day to rats results in a variety of abnormal behaviors. These build over the 90 day course of treatment and can persist at full strength for at least several months after cessation of treatment. The behaviors are consistent with those observed in animal models of schizophrenia and include hyperactivity, reduced sucrose-preference, and decreased social interaction. In order to elucidate molecular changes that underlie these aberrant behaviors, we chronically treated rats with LSD and performed RNA-sequencing on the medial prefrontal cortex (mPFC), an area highly associated with both the actions of LSD and the pathophysiology of schizophrenia and other psychiatric illnesses. We observed widespread changes in the neurogenetic state of treated animals four weeks after cessation of LSD treatment. QPCR was used to validate a subset of gene expression changes observed with RNA-Seq, and confirmed a significant correlation between the two methods. Functional clustering analysis indicates differentially expressed genes are enriched in pathways involving neurotransmission (Drd2, Gabrb1), synaptic plasticity (Nr2a, Krox20), energy metabolism (Atp5d, Ndufa1) and neuropeptide signaling (Npy, Bdnf), among others. Many processes identified as altered by chronic LSD are also implicated in the pathogenesis of schizophrenia, and genes affected by LSD are enriched with putative schizophrenia genes. Our results provide a relatively comprehensive analysis of mPFC transcriptional regulation in response to chronic LSD, and indicate that the long-term effects of LSD may bear relevance to psychiatric illnesses, including schizophrenia. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Sigma-model formulation of the Yang-Mills theory on four-dimensional hypersphere

    International Nuclear Information System (INIS)

    Ivanov, E.A.; Krivonos, S.O.

    1981-01-01

    The bilocal sigma-model representation is constructed for the Yang-Mills theory in the simplest conformally flat hyperspherical spaces So(1,4)/SO(1,3), SO(2,3)/SO(1,3) and SO(5)/SO(4). Like in the case of Minkowski and Euclidean spaces, Yang-Mills potential is defined as bsub(μ)(x)=dsub(μ)sup(y)b(x,y)|y=0 , b(x,y) being a bilocal Goldstone field which takes values in the gauge group algebra and is subjected to certain covariant constraints. The minimal version of these constraints results in the ''string'' representation for b(x,y) through the P-exponential of bsub(μ)(x) along the fixed paths coinciding with geodesics. Due to the presence of closed geodesics, the contour fuctionals naturally appear in the theory, with contours being the circles with the hypersphere radius. The sigma-model representation is shown to be Weyl-covariant: its formulations indifferent conformally flat spaces are related by transformations of ysup(rho). The geometric meaning of ysup(rho) and minimal constraints is explained, and the conformal group gransformation for ysup(rho) is found [ru

  8. Sigma-model formulation of the Yang-Mills theory on four-dimensional hypersphere

    International Nuclear Information System (INIS)

    Ivanov, E.A.; Krivonos, S.O.

    1983-01-01

    The bilocal sigma-model representation is constructed for Yang-Mills theory in the simplest conformally flat hyperspherical spases SO(1, 4)/SO(1, 3), SO(2, 3)/SO(1, 3) and SO(5)/SO(4) (for the Euclidean Yang-Mills). Like in the case of Minkowski and Euclidean spaces, Yang-Mills potential is defined as bsub(μ)(x)=dsub(μ)sup(y)b(x, y)sub(y=0), b(x, y) being a bilocal Goldstone field which takes values in the gauge group algebra and is subjected to certain covariant constraints. The minimal version of these constraints results in the ''string'' representation for b(x, y) through the P exponential of bsub(μ)(x) along the fixed paths coinciding with geodesics. Due to the presence of closed geodesics, the contour functional naturally appear in the theory, with contours being the circles with the hypersphere radius. The sigma-model representation is shown to be Weyl-covariant: its formulations in different conformally flat spaces are related by transformations of ysup(rho). The geometric meaning ysup(rho) and minimal constraints is explained, and the conformal group transofrmation of ysup(rho) is found

  9. Peningkatan performansi produksi dengan pendekatan lean six sigma

    Directory of Open Access Journals (Sweden)

    H. Harisupriyanto

    2018-01-01

    Full Text Available Abstrak Persaingan pasar tidak sekedar menjual produk akan tetapi membutuhkan kualitas produk yang semakin baik. Kondisi tersebut semakin penting bila dihubungkan dengan permintaan produk yang semakin tinggi. Untuk itu diperlukan pengolahan sumber daya yang semakin efisiensi dan effektif. Sering terjadi proses produksi berhenti dan ditaksir kerugian finansial yang tinggi. Terdapat aktifitas yang bersifat non value added. Aktifitas tersebut menyebabkan timbulnyalosses. Diperlukan cara untuk menelusuri penyebab terjadinya waste atau losses pada aktivitas produksi dengan pendekatan lean six sigma. Tools yang dipakai untuk mengidentifikasi permasalahan adalah E-DOWNTIME waste, RCA (root cause Analisys dan FMEA (Failure modes and effect analysis. Diperoleh hasil bahwavalue added activity sebesar 22%, necessary but non value added activity yaitu 44% dan nonvalue added activity sebesar 34%. Diperoleh tiga waste kritis yaitu waiting, defect dan excess processing waste. Nilai sigma awal pada defect waste yaitu sebesar 2.70;nilai sigma ini merupakan permasalahan. Rekomendasi perbaikan adalah pembuatan dan pengawasan SOP dan pengadaan pelatihan guna meningkatkan kemampuan dan keterampilan tenaga kerja. Terjadi kenaikan nilai sigma sampai 3.10 dan terjadi pengurangan biaya sampai 25%. Kata Kunci: Losses, activity, RCA, Lean, six-sigma Abstract The market competition is not just selling a product but needs a better product quality. That condition increasingly important when associated with higher product demand. It required the processing resources more efficient and effective.The production process often stops and estimated financial loss is high. There were indications of activities nonvalue added. These activities cause losses. Need a way to explore the causes of waste or losses in production activities with lean six- sigma approach.Tools used to identify the problem are E-DOWNTIME waste, RCA (root cause Analisys and FMEA (Failure modes and effects

  10. Decays of open charmed mesons in the extended Linear Sigma Model

    Directory of Open Access Journals (Sweden)

    Eshraim Walaa I.

    2014-01-01

    Full Text Available We enlarge the so-called extended linear Sigma model (eLSM by including the charm quark according to the global U(4r × U(4l chiral symmetry. In the eLSM, besides scalar and pseudoscalar mesons, also vector and axial-vector mesons are present. Almost all the parameters of the model were fixed in a previous study of mesons below 2 GeV. In the extension to the four-flavor case, only three additional parameters (all of them related to the bare mass of the charm quark appear.We compute the (OZI dominant strong decays of open charmed mesons. The results are compatible with the experimental data, although the theoretical uncertainties are still large.

  11. Research on High Efficient Single-Phase Multi-Stage Interleaved Bridgeless PFC Frontend for Class-D Amplifiers

    DEFF Research Database (Denmark)

    Li, Qingnan; Thomsen, Ole Cornelius; Andersen, Michael A. E.

    2012-01-01

    In this paper, a 3.5kW single-phase high efficient interleaved Bridgeless PFC (IBPFC) is proposed for class-D amplifiers. This topology achieves a relatively higher efficiency in a wide output power range, which helps to reduce the energy consuming of the whole system. In addition, a detailed...

  12. The effect of future time perspective on delay discounting is mediated by the gray matter volume of vmPFC.

    Science.gov (United States)

    Guo, Yiqun; Chen, Zhiyi; Feng, Tingyong

    2017-07-28

    Although several previous studies have shown that individuals' attitude towards time could affect their intertemporal preference, little is known about the neural basis of the relation between time perspective (TP) and delay discounting. In the present study, we quantified the gray matter (GM) cortical volume using voxel-based morphometry (VBM) methods to investigate the effect of TP on delay discounting (DD) across two independent samples. For group 1 (102 healthy college students; 46 male; 20.40 ± 1.87 years), behavioral results showed that only Future TP was a significant predictor of DD, and higher scores on Future TP were related to lower discounting rates. Whole-brain analysis revealed that steeper discounting correlated with greater GM volume in the ventromedial prefrontal cortex (vmPFC) and ventral part of posterior cingulate cortex (vPCC). Also, GM volume of a cluster in the vmPFC was correlated with Future TP. Interestingly, there was an overlapping region in vmPFC that was correlated with both DD and Future TP. Region-of-interest analysis further indicated that the overlapping region of vmPFC played a partially mediating role in the relation between Future TP and DD in the other independent dataset (Group 2, 36 healthy college students; 14 male; 20.18±1.80 years). Taken together, our results provide a new perspective from neural basis for explaining the relation between DD and future TP. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. NMDA antagonist, but not nNOS inhibitor, requires AMPA receptors in the ventromedial prefrontal cortex (vmPFC) to induce antidepressant-like effects

    DEFF Research Database (Denmark)

    Pereira, V. S.; Wegener, Gregers; Joca, S. R.

    2013-01-01

    of the glutamatergic and nitrergic systems of the vmPFC on the behavioral consequences induced by forced swimming (FS), an animal model of depression. Male Wistar rats (230-260g) with guide cannulas aimed at the prelimbic (PL) region of vmPFC were submitted to a 15min session of FS and, 24h later, they were submitted...

  14. Fixed target beams

    CERN Document Server

    Kain, V; Cettour-Cave, S; Cornelis, K; Fraser, M A; Gatignon, L; Goddard, B; Velotti, F

    2017-01-01

    The CERN SPS (Super Proton Synchrotron) serves asLHC injector and provides beam for the North Area fixedtarget experiments. At low energy, the vertical acceptancebecomes critical with high intensity large emittance fixed tar-get beams. Optimizing the vertical available aperture is a keyingredient to optimize transmission and reduce activationaround the ring. During the 2016 run a tool was developed toprovide an automated local aperture scan around the entirering.The flux of particles slow extracted with the1/3inte-ger resonance from the Super Proton Synchrotron at CERNshould ideally be constant over the length of the extractionplateau, for optimum use of the beam by the fixed target ex-periments in the North Area. The extracted intensity is con-trolled in feed-forward correction of the horizontal tune viathe main SPS quadrupoles. The Mains power supply noiseat 50 Hz and harmonics is also corrected in feed-forwardby small amplitude tune modulation at the respective fre-quencies with a dedicated additional quad...

  15. Sistem Informasi Kinerja Layanan Laboratorium Medis dengan Metode Six Sigma

    Directory of Open Access Journals (Sweden)

    Anindita Kusumastuti Dewi

    2016-01-01

    Full Text Available Medical Laboratory currently holds a very important role in medicine. Evaluation of laboratory quality plays a very important to maintain accurate laboratory results. This study aims to design an information system performance based on the same perception of medical laboratory services from customers using Six Sigma methods and frameworks using ServQual questionnaire. Selection of Six Sigma itself is based on this method can measure the extent to which each process deviates from its purpose as well as to reduce the variation of each of the attributes.  Six Sigma DMAIC namely (Define, Measure, Analyze, Improve, Control preferred because the end result will not yield new products, but only improvements on existing processes. The results of this calculation will be presented in the form of a dashboard for easier management in understanding the results of the evaluation. From the system can be obtained an average value of consumer perceptions terhdap performance today is 2,883, consumer expectations on the performance of 3.3768, the gap between the perceptions and expectations of consumers is -0.4936, customer satisfaction will be the performance of the current 85.37%, the value of 423 360 DPMO and sigma value there at the 2.07664 level.   Keywords: Laboratory Performance; Six Sigma; Servqual; Dashboard

  16. A Lean Six Sigma program in higher education

    KAUST Repository

    Svensson, Carsten

    2015-01-01

    Purpose The objective of this paper is to contribute to the body of Lean Six Sigma knowledge within the field of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges of applying the Lean Six Sigma method in a complex transactional environment. Design/methodology/approach The observations presented in this paper originate from rolling out a large Lean Six Sigma implementation at a recently established university. The paper is supported with secondary data from literature. Findings The implementation of Lean Six Sigma methodology at King Abdullah University of Science and Technology (KAUST) has resulted in improvements in business processes and efficiency. This has been achieved through project execution and training programs. Approximately 350 staff members have completed awareness training, 50 yellow belts and 150 green belts have been trained, and the first round of seven black belts have completed training of which two have completed certification. Research limitations/implications This paper is based on an empirical study of a single instance and the authors’ experiences as practitioners. Originality/value This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  17. APLIKASI SIX SIGMA PADA PRODUK CLEAR FILE DI PERUSAHAAN STATIONARY

    Directory of Open Access Journals (Sweden)

    Desy Emilasari

    2007-01-01

    Full Text Available This paper describes the application of the Six Sigma methods is used in order to improve quality in manufacturing company that produce stationary product. DMAIC approach is utilized to analyze and improve 'Pocket Clear File' product since this product has more variability and defects. Quality improvement also monitor the process that influenced pocket defect in Bag Making, Kami-ire, Karidome, and Pocket after Karidome Inspections section. Determining of Six Sigma project is based in process and defect type in each section. FMEA also gave the recommendation for quality improvement we need to evaluate the final result of the improvement since some of them were not working properly. Abstract in Bahasa Indonesia : Paper ini menggambarkan bagaimana aplikasi metode Six Sigma digunakan untuk melakukan perbaikan kualitas pada perusahaan manufaktur yang memproduksi produk stationary. Pendekatan DMAIC dipakai untuk menganalisa dan melakukan perbaikan produk 'Pocket Clear File' karena tingginya variabilitas dan cacat dibanding produk lain. Perbaikan kualitas juga memperhatikan proses yang mempengaruhi terjadinya cacat pocket pada section Bag Making, Kami-ire, Karidome, dan Pocket after Karidome Inspection. Penentuan proyek Six Sigma didasarkan atas proses dan jenis cacat pada setiap section. Pendekatan FMEA mampu memberi rekomendasi perbaikan kualitas. Evaluasi dari hasil perbaikan penting untuk dilakukan karena beberapa implementasi perbaikan kualitas tidak berjalan sesuai dengan rencana. kata kunci: six sigma, DMAIC, perusahaan stationary.

  18. Can Six Sigma be the "cure" for our "ailing" NHS?

    Science.gov (United States)

    Antony, Jiju; Downey-Ennis, Kay; Antony, Frenie; Seow, Chris

    2007-01-01

    The purpose of this research is to analyse whether Six Sigma business strategy can be used to improve the financial and operational performance of the NHS. The paper will also look at some of the major challenges and barriers in the implementation of this powerful process improvement strategy within the healthcare sector. This paper discusses whether Six Sigma DMAIC methodology can be a useful and disciplined approach to tackle process- and quality-related problems in the NHS. The paper presents some key findings from other researchers in the field, followed by some comments on whether Six Sigma is a useful approach to be considered by the NHS for cost reduction and defect reduction strategies. The paper illustrates the point that Six Sigma is not confined just to manufacturing industry, rather it is equally applicable to service industry, especially the healthcare and financial sectors. The application of Six Sigma in the UK health sector is relatively new and the purpose of the paper is to increase the awareness of this powerful business strategy in healthcare discipline.

  19. Experimental Qualification of the Sleeved Pin Multilink Attachment for Divertor PFC's

    International Nuclear Information System (INIS)

    Poutanen, J.; McCallum, A.; Turner, A.; Merola, M.

    2006-01-01

    The latest design for connecting the limited life ITER divertor plasma facing components (PFC's) to the reusable cassette body is the so called sleeved pin multilink attachment. The connection is made by expanding a 43 mm diameter hollow AlBr pin inside the fixation holes of components of the cassette body and PFC by a swaging process. The multilink is an easy, safe and fast assembly method, but the original dismantling method of drilling out the pin was found troublesome. Therefore, in the latest attachment design a thin sleeve is incorporated between the pin and the holes, which makes it possible to dismantle the joint by simply pulling out the pin and sleeve sequentially. Experimental qualification of the new sleeved design is now proceeding. The aim of the experimental qualification is to prove that the sleeved design meets the requirements of load carrying capability, clearance free connection, and easy and safe removal. Associated analytical studies were performed to develop and verify theoretical models and correlations for use in design. Results from the experimental qualification will provide reference information for developing tools for making and removing the connection. Theoretical finite element models in association with the results of earlier test campaigns with nonsleeved design were used to determine pin expansion parameters. The expansion parameters were verified with plate-pin tests measuring contact pressures produced by pin expansion. The plate-pin tests were also used to demonstrate the feasibility of pin removal and develop pin removal methodology. The mechanical capabilities of the connection design are being examined with test series of cyclic tensile loading plus articulation-induced loading of a single connection mock-up. Remaking properties of the attachment are being studied with multiple swaging and removing of the pin into the fixation holes. Finally the dismantling of the connection will be examined with full length pin extraction

  20. sigma model approach to the heterotic string theory

    International Nuclear Information System (INIS)

    Sen, A.

    1985-09-01

    Relation between the equations of motion for the massless fields in the heterotic string theory, and the conformal invariance of the sigma model describing the propagation of the heterotic string in arbitrary background massless fields is discussed. It is emphasized that this sigma model contains complete information about the string theory. Finally, we discuss the extension of the Hull-Witten proof of local gauge and Lorentz invariance of the sigma-model to higher order in α', and the modification of the transformation laws of the antisymmetric tensor field under these symmetries. Presence of anomaly in the naive N = 1/2 supersymmetry transformation is also pointed out in this context. 12 refs

  1. Analysis of CPN-1 sigma models via projective structures

    International Nuclear Information System (INIS)

    Post, S; Grundland, A M

    2012-01-01

    This paper represents a study of projector solutions to the Euclidean CP N-1 sigma model in two dimensions and their associated surfaces immersed in the su(N) Lie algebra. Any solution for the CP N-1 sigma model defined on the extended complex plane with finite action can be written as a raising operator acting on a holomorphic one. Here the proof is formulated in terms rank-1 projectors so it is explicitly gauge invariant. We apply these results to the analysis of surfaces associated with the CP N-1 models defined using the generalized Weierstrass formula for immersion. We show that the surfaces are conformally parametrized by the Lagrangian density, with finite area equal to the action of the model, and express several other geometrical characteristics of the surface in terms of the physical quantities of the model. Finally, we provide necessary and sufficient conditions that a surface be related to a CP N-1 sigma model

  2. Vortices, semi-local vortices in gauged linear sigma model

    International Nuclear Information System (INIS)

    Kim, Namkwon

    1998-11-01

    We consider the static (2+1)D gauged linear sigma model. By analyzing the governing system of partial differential equations, we investigate various aspects of the model. We show the existence of energy finite vortices under a partially broken symmetry on R 2 with the necessary condition suggested by Y. Yang. We also introduce generalized semi-local vortices and show the existence of energy finite semi-local vortices under a certain condition. The vacuum manifold for the semi-local vortices turns out to be graded. Besides, with a special choice of a representation, we show that the O(3) sigma model of which target space is nonlinear is a singular limit of the gauged linear sigma model of which target space is linear. (author)

  3. Quasicomplex N=2, d=1 Supersymmetric Sigma Models

    Directory of Open Access Journals (Sweden)

    Evgeny A. Ivanov

    2013-11-01

    Full Text Available We derive and discuss a new type of N=2 supersymmetric quantum mechanical sigma models which appear when the superfield action of the (1,2,1 multiplets is modified by adding an imaginary antisymmetric tensor to the target space metric, thus completing the latter to a non-symmetric Hermitian metric. These models are not equivalent to the standard de Rham sigma models, but are related to them through a certain special similarity transformation of the supercharges. On the other hand, they can be obtained by a Hamiltonian reduction from the complex supersymmetric N=2 sigma models built on the multiplets (2,2,0 and describing the Dolbeault complex on the manifolds with proper isometries. We study in detail the extremal two-dimensional case, when the target space metric is defined solely by the antisymmetric tensor, and show that the corresponding quantum systems reveal a hidden N=4 supersymmetry.

  4. The Process to Estimate Economical Benefits of Six Sigma Projects

    Directory of Open Access Journals (Sweden)

    Jan Kosina

    2013-07-01

    Full Text Available This paper seeks to define the process for the continuous evaluation of the financial benefits during Six Sigma project life time. The financial criteria are critical success factors of a Six Sigma project. The process has been developed as part of the six sigma project monitoring in order to estimate proper allocation of the resources taking in account the expected project benefits as well as evaluationof real achievements. The evaluation of the finacial benefits based on the quality costs is not sufficient in the real life and has to be accomplished with key financial performance indicators of the business to visualize the results. The evaluation based on the savings seems to be too difficult especially for green belts. The early involvement of the finance department in the project definition as well as ongoing evaluation is key. The defined process has been applied to real business enviroment.

  5. Lectures on nonlinear sigma-models in projective superspace

    International Nuclear Information System (INIS)

    Kuzenko, Sergei M

    2010-01-01

    N= 2 supersymmetry in four spacetime dimensions is intimately related to hyperkaehler and quaternionic Kaehler geometries. On one hand, the target spaces for rigid supersymmetric sigma-models are necessarily hyperkaehler manifolds. On the other hand, when coupled to N= 2 supergravity, the sigma-model target spaces must be quaternionic Kaehler. It is known that such manifolds of restricted holonomy are difficult to generate explicitly. Projective superspace is a field-theoretic approach to construct general N= 2 supersymmetric nonlinear sigma-models, and hence to generate new hyperkaehler and quaternionic Kaehler metrics. Intended for a mixed audience consisting of both physicists and mathematicians, these lectures provide a pedagogical introduction to the projective-superspace approach. (topical review)

  6. Role of sigma-1 receptors in neurodegenerative diseases

    Directory of Open Access Journals (Sweden)

    Linda Nguyen

    2015-01-01

    Full Text Available Neurodegenerative diseases with distinct genetic etiologies and pathological phenotypes appear to share common mechanisms of neuronal cellular dysfunction, including excitotoxicity, calcium dysregulation, oxidative damage, ER stress and mitochondrial dysfunction. Glial cells, including microglia and astrocytes, play an increasingly recognized role in both the promotion and prevention of neurodegeneration. Sigma receptors, particularly the sigma-1 receptor subtype, which are expressed in both neurons and glia of multiple regions within the central nervous system, are a unique class of intracellular proteins that can modulate many biological mechanisms associated with neurodegeneration. These receptors therefore represent compelling putative targets for pharmacologically treating neurodegenerative disorders. In this review, we provide an overview of the biological mechanisms frequently associated with neurodegeneration, and discuss how sigma-1 receptors may alter these mechanisms to preserve or restore neuronal function. In addition, we speculate on their therapeutic potential in the treatment of various neurodegenerative disorders.

  7. Lectures on nonlinear sigma-models in projective superspace

    Energy Technology Data Exchange (ETDEWEB)

    Kuzenko, Sergei M, E-mail: kuzenko@cyllene.uwa.edu.a [School of Physics M013, University of Western Australia, 35 Stirling Highway, Crawley WA 6009 (Australia)

    2010-11-05

    N= 2 supersymmetry in four spacetime dimensions is intimately related to hyperkaehler and quaternionic Kaehler geometries. On one hand, the target spaces for rigid supersymmetric sigma-models are necessarily hyperkaehler manifolds. On the other hand, when coupled to N= 2 supergravity, the sigma-model target spaces must be quaternionic Kaehler. It is known that such manifolds of restricted holonomy are difficult to generate explicitly. Projective superspace is a field-theoretic approach to construct general N= 2 supersymmetric nonlinear sigma-models, and hence to generate new hyperkaehler and quaternionic Kaehler metrics. Intended for a mixed audience consisting of both physicists and mathematicians, these lectures provide a pedagogical introduction to the projective-superspace approach. (topical review)

  8. Genome-scale reconstruction of the sigma factor network in Escherichia coli: topology and functional states

    DEFF Research Database (Denmark)

    Cho, Byung-Kwan; Kim, Donghyuk; Knight, Eric M.

    2014-01-01

    Background: At the beginning of the transcription process, the RNA polymerase (RNAP) core enzyme requires a sigma-factor to recognize the genomic location at which the process initiates. Although the crucial role of sigma-factors has long been appreciated and characterized for many individual...... to transcription units (TUs), representing an increase of more than 300% over what has been previously reported. The reconstructed network was used to investigate competition between alternative sigma-factors (the sigma(70) and sigma(38) regulons), confirming the competition model of sigma substitution...

  9. Aplicação da metodologia Lean Six Sigma para melhoria de um processo produtivo

    OpenAIRE

    Augusto Schaffer

    2016-01-01

    O Lean Six Sigma é a metodologia originada a partir da integração das metodologias Lean e Six Sigma. O Lean Six Sigma procura eliminar as perdas e reduzir os defeitos, agregando os benefícios de cada uma das duas metodologias que a dão origem. O objetivo deste trabalho é aplicar a metodologia Lean Six Sigma para melhoria de um processo produtivo. Neste trabalho é apresentada uma revisão bibliográfica sobre as metodologias Lean e Six Sigma, buscando a compreensão das origens do Lean Six Sigma,...

  10. Fixed term employment

    International Nuclear Information System (INIS)

    Durant, B.W.; Schonberner, M.J.

    1999-01-01

    A series of brief notes were included with this presentation which highlighted certain aspects of contract management. Several petroleum companies have realized the benefits of taking advantage of contract personnel to control fixed G and A, manage the impacts on their organization, contain costs, to manage termination costs, and to fill gaps in lean personnel rosters. An independent contractor was described as being someone who is self employed, often with a variety of work experiences. The tax benefits and flexibility of contractor personnel were also described. Some liability aspects of hiring an independent contractor were also reviewed. The courts have developed the following 4 tests to help determine whether an individual is an employee or an independent contractor: (1) the control test, (2) the business integration test, (3) specific result test, and (4) the economic reality test

  11. Fixed Access Network Sharing

    Science.gov (United States)

    Cornaglia, Bruno; Young, Gavin; Marchetta, Antonio

    2015-12-01

    Fixed broadband network deployments are moving inexorably to the use of Next Generation Access (NGA) technologies and architectures. These NGA deployments involve building fiber infrastructure increasingly closer to the customer in order to increase the proportion of fiber on the customer's access connection (Fibre-To-The-Home/Building/Door/Cabinet… i.e. FTTx). This increases the speed of services that can be sold and will be increasingly required to meet the demands of new generations of video services as we evolve from HDTV to "Ultra-HD TV" with 4k and 8k lines of video resolution. However, building fiber access networks is a costly endeavor. It requires significant capital in order to cover any significant geographic coverage. Hence many companies are forming partnerships and joint-ventures in order to share the NGA network construction costs. One form of such a partnership involves two companies agreeing to each build to cover a certain geographic area and then "cross-selling" NGA products to each other in order to access customers within their partner's footprint (NGA coverage area). This is tantamount to a bi-lateral wholesale partnership. The concept of Fixed Access Network Sharing (FANS) is to address the possibility of sharing infrastructure with a high degree of flexibility for all network operators involved. By providing greater configuration control over the NGA network infrastructure, the service provider has a greater ability to define the network and hence to define their product capabilities at the active layer. This gives the service provider partners greater product development autonomy plus the ability to differentiate from each other at the active network layer.

  12. Sigma set scattering equations in nuclear reaction theory

    International Nuclear Information System (INIS)

    Kowalski, K.L.; Picklesimer, A.

    1982-01-01

    The practical applications of partially summed versions of the Rosenberg equations involving only special subsets (sigma sets) of the physical amplitudes are investigated with special attention to the Pauli principle. The requisite properties of the transformations from the pair labels to the set of partitions labeling the sigma set of asymptotic channels are established. New, well-defined, scattering integral equations for the antisymmetrized transition operators are found which possess much less coupling among the physically distinct channels than hitherto expected for equations with kernels of equal complexity. In several cases of physical interest in nuclear physics, a single connected-kernel equation is obtained for the relevant antisymmetrized elastic scattering amplitude

  13. Dilaton gravity, Poisson sigma models and loop quantum gravity

    International Nuclear Information System (INIS)

    Bojowald, Martin; Reyes, Juan D

    2009-01-01

    Spherically symmetric gravity in Ashtekar variables coupled to Yang-Mills theory in two dimensions and its relation to dilaton gravity and Poisson sigma models are discussed. After introducing its loop quantization, quantum corrections for inverse triad components are shown to provide a consistent deformation without anomalies. The relation to Poisson sigma models provides a covariant action principle of the quantum-corrected theory with effective couplings. Results are also used to provide loop quantizations of spherically symmetric models in arbitrary D spacetime dimensions.

  14. Juego de rol Lean Six Sigma para empresas

    OpenAIRE

    Moldon Garrido, David; Porqueras Vila, Olga

    2015-01-01

    El objetivo del presente trabajo es la creación de un juego de rol que sirva a las empresas como formación. El fin de este juego es concienciar y formar a los trabajadores en la metodología Lean Six Sigma. Lean Six Sigma es una metodología centrada en la mejora continua para reducir los costes de la no calidad. Estos costes son aquellos generados por la producción de material o servicios que no cumplen los requerimientos del cliente. Creamos un juego de rol en el que los participantes form...

  15. Lean Six Sigma en las administraciones públicas

    OpenAIRE

    Chiaburu, Gheorghe

    2014-01-01

    RESUMEN: El objetivo principal de este trabajo es realizar un estudio sobre la metodología Six Sigma y la metodología Lean, evaluando su posible implementación en las Administraciones públicas. Como se muestra más adelante la unión de estas dos metodologías es más que un sistema de calidad, es una filosofía de trabajo que busca la perfección continua de los procesos. La implementación de la Six Sigma se ha realizado principalmente en industrias manufactureras y de producción y de mane...

  16. Note on off-shell relations in nonlinear sigma model

    International Nuclear Information System (INIS)

    Chen, Gang; Du, Yi-Jian; Li, Shuyi; Liu, Hanqing

    2015-01-01

    In this note, we investigate relations between tree-level off-shell currents in nonlinear sigma model. Under Cayley parametrization, all odd-point currents vanish. We propose and prove a generalized U(1) identity for even-point currents. The off-shell U(1) identity given in http://dx.doi.org/10.1007/JHEP01(2014)061 is a special case of the generalized identity studied in this note. The on-shell limit of this identity is equivalent with the on-shell KK relation. Thus this relation provides the full off-shell correspondence of tree-level KK relation in nonlinear sigma model.

  17. Symmetries and discretizations of the O(3) nonlinear sigma model

    Energy Technology Data Exchange (ETDEWEB)

    Flore, Raphael [TPI, Universitaet Jena (Germany)

    2011-07-01

    Nonlinear sigma models possess many interesting properties like asymptotic freedom, confinement or dynamical mass generation, and hence serve as toy models for QCD and other theories. We derive a formulation of the N=2 supersymmetric extension of the O(3) nonlinear sigma model in terms of constrained field variables. Starting from this formulation, it is discussed how the model can be discretized in a way that maintains as many symmetries of the theory as possible. Finally, recent numerical results related to these discretizations are presented.

  18. Hyperon sigma terms for 2+1 quark flavours

    Energy Technology Data Exchange (ETDEWEB)

    Horsley, R.; Winter, F.; Zanotti, J.M. [Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Nakamura, Y. [RIKEN Advanded Institute for Computational Science, Kobe, Hyogo (Japan); Perlt, H.; Schiller, A. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Pleiter, D. [Juelich Research Centre (Germany); Regensburg Univ. (Germany). Institut fuer Theoretische Physik; Rakow, P.E.L. [Liverpool Univ. (United Kingdom). Theoretical Physics Division; Schierholz, G. [Regensburg Univ. (Germany). Institut fuer Theoretische Physik; Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stueben, H. [Konrad-Zuse-Zentrum fuer Informationstechnik Berlin (ZIB) (Germany)

    2011-10-15

    QCD lattice simulations determine hadron masses as functions of the quark masses. From the gradients of these masses and using the Feynman- Hellmann theorem the hadron sigma terms can then be determined. We use here a novel approach of keeping the singlet quark mass constant in our simulations which upon using an SU(3) flavour symmetry breaking expansion gives highly constrained (i.e. few parameter) fits for hadron masses in a multiplet. This is a highly advantageous procedure for determining the hadron mass gradient as it avoids the use of delicate chiral perturbation theory. We illustrate the procedure here by estimating the light and strange sigma terms for the baryon octet. (orig.)

  19. Classically integrable boundary conditions for symmetric-space sigma models

    International Nuclear Information System (INIS)

    MacKay, N.J.; Young, C.A.S.

    2004-01-01

    We investigate boundary conditions for the non-linear sigma model on the compact symmetric space G/H. The Poisson brackets and the classical local conserved charges necessary for integrability are preserved by boundary conditions which correspond to involutions which commute with the involution defining H. Applied to SO(3)/SO(2), the non-linear sigma model on S 2 , these yield the great circles as boundary submanifolds. Applied to GxG/G, they reproduce known results for the principal chiral model

  20. Supersymmetric sigma models and composite Yang-Mills theory

    International Nuclear Information System (INIS)

    Lukierski, J.

    1980-04-01

    We describe two types of supersymmetric sigma models: with field values in supercoset space and with superfields. The notion of Riemannian symmetric pair (H,G/H) is generalized to supergroups. Using the supercoset approach the superconformal-invariant model of composite U(n) Yang-Mills fields in introduced. In the framework of the superfield approach we present with some details two versions of the composite N=1 supersymmetric Yang-Mills theory in four dimensions with U(n) and U(m) x U(n) local invariance. We argue that especially the superfield sigma models can be used for the description of pre-QCD supersymmetric dynamics. (author)

  1. The SU(2 vertical stroke 3) spin chain sigma model

    International Nuclear Information System (INIS)

    Hernandez, R.; Lopez, E.

    2005-01-01

    The one-loop planar dilatation operator of N = 4 supersymmetric Yang-Mills is isomorphic to the hamiltonian of an integrable PSU(2,2 vertical stroke 4) spin chain. We construct the non-linear sigma model describing the continuum limit of the SU(2 vertical stroke 3) subsector of the N = 4 chain. We explicitly identify the spin chain sigma model with the one for a superstring moving in AdS 5 x S 5 with large angular momentum along the five-sphere. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  2. A lattice determination of Sigma-Lambda mixing

    Energy Technology Data Exchange (ETDEWEB)

    Horsley, R. [Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Najjar, J. [Regensburg Univ. (Germany). Institut fuer Theoretische Physik; Nakamura, Y. [RIKEN Advanced Institute for Computational Science, Kobe (Japan); Perlt, H.; Schiller, A. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Pleiter, D. [Forschungszentrum Juelich (Germany). Juelich Supercomputer Centre; Rakow, P.E.L. [Liverpool Univ. (United Kingdom). Theoretical Physics Division; Schierholz, G. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stueben, H. [Hamburg Univ. (Germany). Regionales Rechenzentrum; Zanotti, J.M. [Adelaide Univ. (Australia). CSSM, Dept. of Physics; Collaboration: QCDSF-UKQCD Collaboration

    2014-11-15

    Isospin breaking effects in baryon octet (and decuplet) masses are due to a combination of up and down quark mass differences and electromagnetic effects and lead to small mass splittings. Between the Sigma and Lambda this mass splitting is much larger, this being mostly due to their different wavefunctions. However when isospin is broken, there is a mixing between between these states. We describe the formalism necessary to determine the QCD mixing matrix and hence find the mixing angle and mass splitting between the Sigma and Lambda particles due to QCD effects.

  3. CMOS sigma-delta converters practical design guide

    CERN Document Server

    De la Rosa, Jose M

    2013-01-01

    A comprehensive overview of Sigma-Delta Analog-to-Digital Converters (ADCs) and a practical guide to their design in nano-scale CMOS for optimal performance. This book presents a systematic and comprehensive compilation of sigma-delta converter operating principles, the new advances in architectures and circuits, design methodologies and practical considerations - going from system-level specifications to silicon integration, packaging and measurements, with emphasis on nanometer CMOS implementation. The book emphasizes practical design issues - from high-level behavioural modelling i

  4. Simulating tokamak PFC performance using simultaneous dual beam particle loading with pulsed heat loading

    Science.gov (United States)

    Sinclair, Gregory; Gonderman, Sean; Tripathi, Jitendra; Ray, Tyler; Hassanein, Ahmed

    2017-10-01

    The performance of plasma facing components (PFCs) in a fusion device are expected to change due to high flux particle loading during operation. Tungsten (W) is a promising PFC candidate material, due to its high melting point, high thermal conductivity, and low tritium retention. However, ion irradiation of D and He have each shown to diminish the thermal strength of W. This work investigates the synergistic effect between ion species, using dual beam irradiation, on the thermal response of W during ELM-like pulsed heat loading. Experiments studied three different loading conditions: laser, laser + He+, and laser + He+ + D+. 100 eV He+ and D+ exposures used a flux of 3.0-3.5 x 1020 m-2 s-1. ELM-like loading was applied using a pulsed Nd:YAG laser at an energy density of 0.38-1.51 MJ m-2 (3600 1 ms pulses at 1 Hz). SEM imaging revealed that laser + He+ loading at 0.76 MJ m-2 caused surface melting, inhibiting fuzz formation. Increasing the laser fluence decreased grain size and increased surface pore density. Thermally-enhanced migration of trapped gases appear to reflect resultant molten morphology. This work was supported by the National Science Foundation PIRE project.

  5. The feasibility of beryllium as structural material for the ITER plasma-facing components (PFC)

    International Nuclear Information System (INIS)

    Vieider, G.; Cardella, A.; Gorenflo, H.

    1993-01-01

    Be as plasma-facing armour has attractive features including excellent plasma compatibility, no T-retention via co-deposition and the potential for in-situ repair via plasma spraying. In order to avoid the bonding of the Be-armour to a heatsink structure in e.g., Cu-alloys, the ITER Joint Central Team (JCT) proposed for the divertor tubular elements with monolithic Be, both as plasma-facing and structural material. The analysis of these Be-tubes with 5 mm wall thickness at a heat load of 5 MW/m 2 showed that even for the most favourable assumptions thermal stresses exceed by far the allowed values according to design codes. Damage by neutrons and disruptions would worsen further the case for Be as monolithic plasma-facing and structural material. For PFC at heat flux significantly above 1 MW/m 2 it appears evident that Be should be used merely as armour bonded to a suitable structural material as heatsink. (orig.)

  6. Implementation of Single Phase Soft Switched PFC Converter for Plug-in-Hybrid Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Aiswariya Sekar

    2015-11-01

    Full Text Available This paper presents a new soft switching boost converter with a passive snubber cell without additional active switches for battery charging systems. The proposed snubber finds its application in the front-end ac-dc converter of Plug-in Hybrid Electric Vehicle (PHEV battery chargers. The proposed auxiliary snubber circuit consists of an inductor, two capacitors and two diodes. The new converter has the advantages of continuous input current, low switching stresses, high voltage gain without extreme duty cycle, minimized charger size and charging time and fewer amounts of cost and electricity drawn from the utility at higher switching frequencies. The switch is made to turn ON by Zero Current Switching (ZCS and turn OFF by Zero Voltage Switching (ZVS. The detailed steady state analysis of the novel ac-dc Zero Current- Zero Voltage Switching (ZC-ZVS boost Power Factor Correction (PFC converter is presented with its operating principle. The experimental prototype of 20 kHz, 100 W converter verifies the theoretical analysis. The power factor of the prototype circuit reaches near unity with an efficiency of 97%, at nominal output power for a ±10% variation in the input voltage and ±20% variation in the snubber component values.

  7. The alternative sigma factor sigma B of Staphylococcus aureus modulates virulence in experimental central venous catheter-related infections.

    Science.gov (United States)

    Lorenz, Udo; Hüttinger, Christian; Schäfer, Tina; Ziebuhr, Wilma; Thiede, Arnulf; Hacker, Jörg; Engelmann, Susanne; Hecker, Michael; Ohlsen, Knut

    2008-03-01

    The impact of the alternative sigma factor sigma B (SigB) on pathogenesis of Staphylococcus aureus is not conclusively clarified. In this study, a central venous catheter (CVC) related model of multiorgan infection was used to investigate the role of SigB for the pathogenesis of S. aureus infections and biofilm formation in vivo. Analysis of two SigB-positive wild-type strains and their isogenic mutants revealed uniformly that the wild-type was significantly more virulent than the SigB-deficient mutant. The observed difference in virulence was apparently not linked to the capability of the strains to form biofilms in vivo since wild-type and mutant strains were able to produce biofilm layers inside of the catheter. The data strongly indicate that the alternative sigma factor SigB plays a role in CVC-associated infections caused by S. aureus.

  8. High resolution transmission electron microscopy studies of {sigma} phase in Ni-based single crystal superalloys

    Energy Technology Data Exchange (ETDEWEB)

    Sun Fei [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Zhang Jianxin, E-mail: jianxin@sdu.edu.cn [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Liu Pan [Institute of Microstructure and Property of Advanced Materials, Beijing University of Technology, Beijing 100124 (China); Feng Qiang [National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 100083 (China); State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Han Xiaodong; Mao Shengcheng [Institute of Microstructure and Property of Advanced Materials, Beijing University of Technology, Beijing 100124 (China)

    2012-09-25

    Graphical abstract: (a) TEM micrograph of {sigma} phase; (b) HRTEM image of {sigma}/{gamma} interface corresponding to the area of the white frame in (a); (c) an enlarged image of area from the white frame in (b). The combination of {sigma}/{gamma} interface appears very well, and a two-atomic-layer step is shown on the {sigma}/{gamma} interface. In addition, {sigma} phase has the orientation relationship of [0 0 1]{sub {gamma}}//[1 1 2{sup Macron }]{sub {sigma}}, (2{sup Macron} 2 0){sub {gamma}}//(1{sup Macron} 1 0){sub {sigma}}, (2{sup Macron }2{sup Macron} 0){sub {gamma}}//(1 1 1){sub {sigma}}; [0 1 1]{sub {gamma}}//[1 1 0]{sub {sigma}}, (1 1{sup Macron} 1){sub {gamma}}//(0 0 1{sup Macron }){sub {sigma}} with the {gamma} phase. Highlights: Black-Right-Pointing-Pointer Elemental characteristic of {sigma} phase is studied by HAADF techniques and EDS analysis. Black-Right-Pointing-Pointer Interfacial characteristics of {sigma}/{gamma} interface are revealed by HRTEM. Black-Right-Pointing-Pointer An atomic structural {sigma}/{gamma} interface with a two-atomic-layer step has been proposed. - Abstract: By means of high resolution transmission electron microscopy (HRTEM) and high-angle annular dark-field image technique (HAADF), morphological of plate-shaped {sigma} phase and interfacial characteristics between plate-shaped {sigma} phase and {gamma} phase in Ni-based single crystal superalloys have been studied. On the basis of HRTEM observations, an atomic structural interface between {sigma} phase and {gamma} phase with a step has been proposed. {sigma} Phase has the relationship of [0 0 1]{sub {gamma}}//[1 1 2{sup Macron }]{sub {sigma}}, (2{sup Macron} 2 0){sub {gamma}}//(1{sup Macron} 1 0){sub {sigma},} (2{sup Macron }2{sup Macron} 0){sub {gamma}}//(1 1 1){sub {sigma}}; [0 1 1]{sub {gamma}}//[1 1 0]{sub {sigma}}, (1 1{sup Macron} 1){sub {gamma}}//(0 0 1{sup Macron }){sub {sigma}} with the {gamma} phase. The compositional characteristics of the {sigma} phase which

  9. Environmental Professional’s Guide to Lean and Six Sigma: Executive Summary

    Science.gov (United States)

    Introduction to the guide that describes how Lean and Six Sigma relate to the environment and provides guidance on how environmental professionals can connect with Lean and Six Sigma activities to generate better environmental and operational results.

  10. IceBridge Sigma Space Lidar L0 Raw Time-of-Flight Data

    Data.gov (United States)

    National Aeronautics and Space Administration — The NASA IceBridge Sigma Space Lidar L0 Raw Time-of-Flight Data (ILSIG0) contain raw time-of-flight values for Antarctica and Greenland using the Sigma Space Lidar....

  11. Exploring liquid metal plasma facing component (PFC) concepts-Liquid metal film flow behavior under fusion relevant magnetic fields

    International Nuclear Information System (INIS)

    Narula, M.; Abdou, M.A.; Ying, A.; Morley, N.B.; Ni, M.; Miraghaie, R.; Burris, J.

    2006-01-01

    The use of fast moving liquid metal streams or 'liquid walls' as a plasma contact surface is a very attractive option and has been looked upon with considerable interest over the past several years, both by the plasma physics and fusion engineering programs. Flowing liquid walls provide an ever replenishing contact surface to the plasma, leading to very effective particle pumping and surface heat flux removal. A key feasibility issue for flowing liquid metal plasma facing component (PFC) systems, pertains to their magnetohydrodynamic (MHD) behavior under the spatially varying magnetic field environment, typical of a fusion device. MHD forces hinder the development of a smooth and controllable liquid metal flow needed for PFC applications. The present study builds up on the ongoing research effort at UCLA, directed towards providing qualitative and quantitative data on liquid metal free surface flow behavior under fusion relevant magnetic fields

  12. Current algebra of classical non-linear sigma models

    International Nuclear Information System (INIS)

    Forger, M.; Laartz, J.; Schaeper, U.

    1992-01-01

    The current algebra of classical non-linear sigma models on arbitrary Riemannian manifolds is analyzed. It is found that introducing, in addition to the Noether current j μ associated with the global symmetry of the theory, a composite scalar field j, the algebra closes under Poisson brackets. (orig.)

  13. Generic Lean Six Sigma project definitions in financial services

    NARCIS (Netherlands)

    de Koning, H.; de Mast, J.; Does, R.J.M.M.; Vermaat, T.; Simons, S.

    2008-01-01

    Lean Six Sigma (LSS) is applied in financial service organizations to improve operational efficiency and effectiveness. LSS prescribes that these improvements are designed and implemented by projects. The purpose of this article is to facilitate the process of defining LSS projects in finance,

  14. Applying Lean and Six Sigma in financial service

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Koning, H.; Anthony, J.; Kumar, M.

    2006-01-01

    Abstract Lean and Six Sigma have gone through parallel developments in recent years. Originally applied to a small range of industries, both approaches are now also used widely in healthcare, administration and service. A recent development is the integration of the two approaches. In this paper we

  15. Lean-Six Sigma: tools for rapid cycle cost reduction.

    Science.gov (United States)

    Caldwell, Chip

    2006-10-01

    Organizational costs can be grouped as process cost, cost of quality, and cost of poor quality. Providers should train managers in the theory and application of Lean-Six Sigma, including the seven categories of waste and how to remove them. Healthcare financial executives should work with managers in eliminating waste to improve service and reduce costs.

  16. Using Six Sigma and Lean methodologies to improve OR throughput.

    Science.gov (United States)

    Fairbanks, Catharine B

    2007-07-01

    Improving patient flow in the perioperative environment is challenging, but it has positive implications for both staff members and for the facility. One facility in vermont improved patient throughput by incorporating Six Sigma and Lean methodologies for patients undergoing elective procedures. The results of the project were significantly improved patient flow and increased teamwork and pride among perioperative staff members. (c) AORN, Inc, 2007.

  17. Application of Six Sigma methodology to a diagnostic imaging process.

    Science.gov (United States)

    Taner, Mehmet Tolga; Sezen, Bulent; Atwat, Kamal M

    2012-01-01

    This paper aims to apply the Six Sigma methodology to improve workflow by eliminating the causes of failure in the medical imaging department of a private Turkish hospital. Implementation of the design, measure, analyse, improve and control (DMAIC) improvement cycle, workflow chart, fishbone diagrams and Pareto charts were employed, together with rigorous data collection in the department. The identification of root causes of repeat sessions and delays was followed by failure, mode and effect analysis, hazard analysis and decision tree analysis. The most frequent causes of failure were malfunction of the RIS/PACS system and improper positioning of patients. Subsequent to extensive training of professionals, the sigma level was increased from 3.5 to 4.2. The data were collected over only four months. Six Sigma's data measurement and process improvement methodology is the impetus for health care organisations to rethink their workflow and reduce malpractice. It involves measuring, recording and reporting data on a regular basis. This enables the administration to monitor workflow continuously. The improvements in the workflow under study, made by determining the failures and potential risks associated with radiologic care, will have a positive impact on society in terms of patient safety. Having eliminated repeat examinations, the risk of being exposed to more radiation was also minimised. This paper supports the need to apply Six Sigma and present an evaluation of the process in an imaging department.

  18. Application of Six Sigma methodology to a cataract surgery unit.

    Science.gov (United States)

    Taner, Mehmet Tolga

    2013-01-01

    The article's aim is to focus on the application of Six Sigma to minimise intraoperative and post-operative complications rates in a Turkish public hospital cataract surgery unit. Implementing define-measure-analyse-improve and control (DMAIC) involves process mapping, fishbone diagrams and rigorous data-collection. Failure mode and effect analysis (FMEA), pareto diagrams, control charts and process capability analysis are applied to redress cataract surgery failure root causes. Inefficient skills of assistant surgeons and technicians, low quality of IOLs used, wrong IOL placement, unsystematic sterilisation of surgery rooms and devices, and the unprioritising network system are found to be the critical drivers of intraoperative-operative and post-operative complications. Sigma level was increased from 2.60 to 3.75 subsequent to extensive training of assistant surgeons, ophthalmologists and technicians, better quality IOLs, systematic sterilisation and air-filtering, and the implementation of a more sophisticated network system. This article shows that Six Sigma measurement and process improvement can become the impetus for cataract unit staff to rethink their process and reduce malpractices. Measuring, recording and reporting data regularly helps them to continuously monitor their overall process and deliver safer treatments. This is the first Six Sigma ophthalmology study in Turkey.

  19. Why all this fuss over a few Sigma ?

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    Sigma, the standard deviation, is the quantity used most often by physicists to express the strength of evidence for a new phenomenon. It is the way they measure the distance between the data observed and the data expected if there were no new phenomenon. What that means is best understood by taking a more familiar example : toss a fair coin (See Bulletin)

  20. Practical Design of Delta-Sigma Multiple Description Audio Coding

    DEFF Research Database (Denmark)

    Leegaard, Jack Højholt; Østergaard, Jan; Jensen, Søren Holdt

    2014-01-01

    It was recently shown that delta-sigma quantization (DSQ) can be used for optimal multiple description (MD) coding of Gaussian sources. The DSQ scheme combined oversampling, prediction, and noise-shaping in order to trade off side distortion for central distortion in MD coding. It was shown that ...

  1. Strategically Focused Training in Six Sigma Way: A Case Study

    Science.gov (United States)

    Pandey, Ashish

    2007-01-01

    Purpose: The purpose of the current study is to examine the utility of Six Sigma interventions as a performance measure and explore its applicability for making the training design and delivery operationally efficient and strategically effective. Design/methodology/approach: This is a single revelatory case study. Data were collected from multiple…

  2. Using Six-Sigma To Change and Measure Improvement.

    Science.gov (United States)

    Feld, Karl G.; Stone, William K.

    2002-01-01

    Explains why Honeywell's Market Research Department replaced its traditional data collection and paper-based tabulation with blended modes, including electronic interviewing and real-time reporting. Describes how the Six-Sigma quality control process demonstrated that a hybrid approach with blended modes and Web-based reporting tools could deliver…

  3. A review of Lean Six Sigma deployment and maturity models

    NARCIS (Netherlands)

    Lameijer, B.A.; de Mast, J.; Does, R.J.M.M.

    2017-01-01

    For guidance in implementing Lean Six Sigma (LSS), both the academic and the practitioners’ literature offer deployment models and models for assessing the implementation’s maturity. This paper makes a critical appraisal of the quality and usefulness of a sample of 19 such models. The appraisal

  4. A rational reconstruction of Six Sigma's Breakthrough Cookbook

    NARCIS (Netherlands)

    de Koning, H.; de Mast, J.

    2006-01-01

    Purpose: The purpose of this paper is to develop a consistent and crystallized exposition of Six-Sigma's methodology for improvement projects, which could serve as a basis for subsequent scientific research of the method. Design/methodology/approach: The paper shows that reformulation of imprecise

  5. Polarization-induced sigma-holes and hydrogen bonding

    Czech Academy of Sciences Publication Activity Database

    Hennemann, M.; Murray, J. S.; Politzer, P.; Riley, Kevin Eugene; Clark, T.

    2012-01-01

    Roč. 18, č. 6 (2012), s. 2461-2469 ISSN 1610-2940 Institutional research plan: CEZ:AV0Z40550506 Keywords : hydrogen bond * sigma-hole * polarization * field effect * ab initio calculation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.984, year: 2012

  6. A Signal-Interleaving Complex Bandpass Sigma-Delta Converter

    DEFF Research Database (Denmark)

    Wad, Paul Emmanuel

    1997-01-01

    Complex or quadrature Sigma-Delta converters operate on complex signals, i.e. signals consisting of a real and an imaginary component, whereas conventional converters operate only on real signals. The advantage of complex signal processing in the discrete-time domain is that the entire sampling...

  7. Generic Lean Six Sigma project definitions in publishing

    NARCIS (Netherlands)

    de Koning, H.; Does, R.J.M.M.; Groen, A.; Kemper, B.P.H.

    2010-01-01

    Purpose - Many companies in the publishing industry are facing the task of developing new business models and becoming more efficient and effective in execution. Lean Six Sigma (LSS) is a unified framework for systematically developing efficiency and quality improvements; it can help realize

  8. Nonlinearities in SC Delta-Sigma A/D Converters

    DEFF Research Database (Denmark)

    Steensgaard-Madsen, Jesper

    1998-01-01

    The effects of using nonlinear low-gain opamps in switched-capacitor delta-sigma modulators are analyzed. Using unconventional topologies, the state variables are made essentially uncorrelated with the input signal, hence opamp nonlinearity will cause very little harmonic distortion. Nonlinearity...

  9. Sigma factors in a thousand E. coli genomes

    DEFF Research Database (Denmark)

    Cook, Helen Victoria; Ussery, David

    2013-01-01

    , 2013), only less than half (983) are of sufficient quality to use in comparative genomic work. Unfortunately, even some of the ‘complete’ E. coli genomes are in pieces, and a few ‘draft’ genomes are good quality. Six of the seven known sigma factors in E. coli strain K‐12 are extremely well conserved...

  10. Gustav Naan ja Sigma Tau / Arvo Pesti, Madli Pesti

    Index Scriptorium Estoniae

    Pesti, Arvo, 1956-2010

    2009-01-01

    Füüsik, kosmoloog ja ühiskonnategelane Gustav Naanist. Merle Karusoo dokumentaallavastusest "Sigma Tau-C705", mis põhineb Enn Vetemaa ja Erki Aule näidendil "Gustav Naani hiilgus ja viletsus". Esietendus 16. märtsil 2008 Eesti Draamateatris

  11. Six Sigma in Health Care: Lessons learned from a Hospital

    NARCIS (Netherlands)

    van den Heuvel, J.; Does, R.J.M.M.; Verver, J.P.S.

    2005-01-01

    Six Sigma is a quality improvement approach aimed at optimising processes while reducing defects and costs. It has been developed and is widely used in industry and recently has been introduced, on a limited scale, in healthcare. In this article, we discuss the results of the implementation of Six

  12. Ex vivo dissection of optogenetically activated mPFC and hippocampal inputs to neurons in the basolateral amygdala: implications for fear and emotional memory

    Directory of Open Access Journals (Sweden)

    Cora eHübner

    2014-03-01

    Full Text Available Many lines of evidence suggest that a reciprocally interconnected network comprising the amygdala, ventral hippocampus (vHC, and medial prefrontal cortex (mPFC participates in different aspects of the acquisition and extinction of conditioned fear responses and fear behavior. This could at least in part be mediated by direct connections from mPFC or vHC to amygdala to control amygdala activity and output. However, currently the interactions between mPFC and vHC afferents and their specific targets in the amygdala are still poorly understood. Here, we use an ex-vivo optogenetic approach to dissect synaptic properties of inputs from mPFC and vHC to defined neuronal populations in the basal amygdala (BA, the area that we identify as a major target of these projections. We find that BA principal neurons (PNs and local BA interneurons (INs receive monosynaptic excitatory inputs from mPFC and vHC. In addition, both these inputs also recruit GABAergic feedforward inhibition in a substantial fraction of PNs, in some neurons this also comprises a slow GABAB-component. Amongst the innervated PNs we identify neurons that project back to subregions of the mPFC, indicating a loop between neurons in mPFC and BA, and a pathway from vHC to mPFC via BA. Interestingly, mPFC inputs also recruit feedforward inhibition in a fraction of INs, suggesting that these inputs can activate dis-inhibitory circuits in the BA. A general feature of both mPFC and vHC inputs to local INs is that excitatory inputs display faster rise and decay kinetics than in PNs, which would enable temporally precise signaling. However, mPFC and vHC inputs to both PNs and INs differ in their presynaptic release properties, in that vHC inputs are more depressing. In summary, our data describe novel wiring, and features of synaptic connections from mPFC and vHC to amygdala that could help to interpret functions of these interconnected brain areas at the network level.

  13. Ex vivo dissection of optogenetically activated mPFC and hippocampal inputs to neurons in the basolateral amygdala: implications for fear and emotional memory

    Science.gov (United States)

    Hübner, Cora; Bosch, Daniel; Gall, Andrea; Lüthi, Andreas; Ehrlich, Ingrid

    2014-01-01

    Many lines of evidence suggest that a reciprocally interconnected network comprising the amygdala, ventral hippocampus (vHC), and medial prefrontal cortex (mPFC) participates in different aspects of the acquisition and extinction of conditioned fear responses and fear behavior. This could at least in part be mediated by direct connections from mPFC or vHC to amygdala to control amygdala activity and output. However, currently the interactions between mPFC and vHC afferents and their specific targets in the amygdala are still poorly understood. Here, we use an ex-vivo optogenetic approach to dissect synaptic properties of inputs from mPFC and vHC to defined neuronal populations in the basal amygdala (BA), the area that we identify as a major target of these projections. We find that BA principal neurons (PNs) and local BA interneurons (INs) receive monosynaptic excitatory inputs from mPFC and vHC. In addition, both these inputs also recruit GABAergic feedforward inhibition in a substantial fraction of PNs, in some neurons this also comprises a slow GABAB-component. Amongst the innervated PNs we identify neurons that project back to subregions of the mPFC, indicating a loop between neurons in mPFC and BA, and a pathway from vHC to mPFC via BA. Interestingly, mPFC inputs also recruit feedforward inhibition in a fraction of INs, suggesting that these inputs can activate dis-inhibitory circuits in the BA. A general feature of both mPFC and vHC inputs to local INs is that excitatory inputs display faster rise and decay kinetics than in PNs, which would enable temporally precise signaling. However, mPFC and vHC inputs to both PNs and INs differ in their presynaptic release properties, in that vHC inputs are more depressing. In summary, our data describe novel wiring, and features of synaptic connections from mPFC and vHC to amygdala that could help to interpret functions of these interconnected brain areas at the network level. PMID:24634648

  14. Aggression and increased glutamate in the mPFC during withdrawal from intermittent alcohol in outbred mice.

    Science.gov (United States)

    Hwa, Lara S; Nathanson, Anna J; Shimamoto, Akiko; Tayeh, Jillian K; Wilens, Allison R; Holly, Elizabeth N; Newman, Emily L; DeBold, Joseph F; Miczek, Klaus A

    2015-08-01

    Disrupted social behavior, including occasional aggressive outbursts, is characteristic of withdrawal from long-term alcohol (EtOH) use. Heavy EtOH use and exaggerated responses during withdrawal may be treated using glutamatergic N-methyl-D-aspartate receptor (NMDAR) antagonists. The current experiments explore aggression and medial prefrontal cortex (mPFC) glutamate as consequences of withdrawal from intermittent access to EtOH and changes in aggression and mPFC glutamate caused by NMDAR antagonists memantine and ketamine. Swiss male mice underwent withdrawal following 1-8 weeks of intermittent access to 20 % EtOH. Aggressive and nonaggressive behaviors with a conspecific were measured 6-8 h into EtOH withdrawal after memantine or ketamine (0-30 mg/kg, i.p.) administration. In separate mice, extracellular mPFC glutamate after memantine was measured during withdrawal using in vivo microdialysis. At 6-8 h withdrawal from EtOH, mice exhibited more convulsions and aggression and decreased social contact compared to age-matched water controls. Memantine, but not ketamine, increased withdrawal aggression at the 5-mg/kg dose in mice with a history of 8 weeks of EtOH but not 1 or 4 weeks of EtOH or in water drinkers. Tonic mPFC glutamate was higher during withdrawal after 8 weeks of EtOH compared to 1 week of EtOH or 8 weeks of water. Five milligrams per kilogram of memantine increased glutamate in 8-week EtOH mice, but also in 1-week EtOH and water drinkers. These studies reveal aggressive behavior as a novel symptom of EtOH withdrawal in outbred mice and confirm a role of NMDARs during withdrawal aggression and for disrupted social behavior.

  15. PLGA/PFC particles loaded with gold nanoparticles as dual contrast agents for photoacoustic and ultrasound imaging

    Science.gov (United States)

    Wang, Yan J.; Strohm, Eric M.; Sun, Yang; Niu, Chengcheng; Zheng, Yuanyi; Wang, Zhigang; Kolios, Michael C.

    2014-03-01

    Phase-change contrast agents consisting of a perfluorocarbon (PFC) liquid core stabilized by a lipid, protein, or polymer shell have been proposed for a variety of clinical applications. Previous work has demonstrated that vaporization can be induced by laser irradiation through optical absorbers incorporated inside the droplet. In this study, Poly-lactide-coglycolic acid (PLGA) particles loaded with PFC liquid and silica-coated gold nanoparticles (GNPs) were developed and characterized using photoacoustic (PA) methods. Microsized PLGA particles were loaded with PFC liquid and GNPs (14, 35, 55nm each with a 20nm silica shell) using a double emulsion method. The PA signal intensity and optical vaporization threshold were investigated using a 375 MHz transducer and a focused 532-nm laser (up to 450-nJ per pulse). The laser-induced vaporization threshold energy decreased with increasing GNP size. The vaporization threshold was 850, 690 and 420 mJ/cm2 for 5μm-sized PLGA particles loaded with 14, 35 and 55 nm GNPs, respectively. The PA signal intensity increased as the laser fluence increased prior to the vaporization event. This trend was observed for all particles sizes. PLGA particles were then incubated with MDA-MB-231 breast cancer cells for 6 hours to investigate passive targeting, and the vaporization of the PLGA particles that were internalized within cells. The PLGA particles passively internalized by MDA cells were visualized via confocal fluorescence imaging. Upon PLGA particle vaporization, bubbles formed inside the cells resulting in cell destruction. This work demonstrates that GNPs-loaded PLGA/PFC particles have potential as PA theranostic agents in PA imaging and optically-triggered drug delivery systems.

  16. Single-Station Sigma for the Iranian Strong Motion Stations

    Science.gov (United States)

    Zafarani, H.; Soghrat, M. R.

    2017-11-01

    In development of ground motion prediction equations (GMPEs), the residuals are assumed to have a log-normal distribution with a zero mean and a standard deviation, designated as sigma. Sigma has significant effect on evaluation of seismic hazard for designing important infrastructures such as nuclear power plants and dams. Both aleatory and epistemic uncertainties are involved in the sigma parameter. However, ground-motion observations over long time periods are not available at specific sites and the GMPEs have been derived using observed data from multiple sites for a small number of well-recorded earthquakes. Therefore, sigma is dominantly related to the statistics of the spatial variability of ground motion instead of temporal variability at a single point (ergodic assumption). The main purpose of this study is to reduce the variability of the residuals so as to handle it as epistemic uncertainty. In this regard, it is tried to partially apply the non-ergodic assumption by removing repeatable site effects from total variability of six GMPEs driven from the local, Europe-Middle East and worldwide data. For this purpose, we used 1837 acceleration time histories from 374 shallow earthquakes with moment magnitudes ranging from M w 4.0 to 7.3 recorded at 370 stations with at least two recordings per station. According to estimated single-station sigma for the Iranian strong motion stations, the ratio of event-corrected single-station standard deviation ( Φ ss) to within-event standard deviation ( Φ) is about 0.75. In other words, removing the ergodic assumption on site response resulted in 25% reduction of the within-event standard deviation that reduced the total standard deviation by about 15%.

  17. tDCS Stimulation of the dlPFC Selectively Moderates the Detrimental Impact of Emotion on Analytical Reasoning.

    Science.gov (United States)

    Trémolière, Bastien; Maheux-Caron, Véronique; Lepage, Jean-François; Blanchette, Isabelle

    2018-01-01

    There is evidence of a detrimental effect of emotion on reasoning. Recent studies suggest that this relationship is mediated by working memory, a function closely associated with the dorsolateral prefrontal cortex (dlPFC). Relying on transcranial direct current stimulation (tDCS), the present research explores the possibility that anodal stimulation of the dlPFC has the potential to prevent the effect of emotion on analytical reasoning. Thirty-four participants took part in a lab experiment and were tested twice: one session using offline anodal stimulation (with a 2 mA current stimulation applied to the left dlPFC for 20 min), one session using a control (sham) stimulation. In each session, participants solved syllogistic reasoning problems featuring neutral and emotionally negative contents. Results showed that anodal stimulation diminished the deleterious effect of emotion on syllogistic reasoning, but only for a subclass of problems: problems where the conclusion was logically valid. We discuss our results in the light of the reasoning literature as well as the apparent variability of tDCS effects.

  18. A Framework for Six Sigma Project Selection in Higher Educational Institutions, Using a Weighted Scorecard Approach

    Science.gov (United States)

    Holmes, Monica C.; Jenicke, Lawrence O.; Hempel, Jessica L.

    2015-01-01

    Purpose: This paper discusses the importance of the Six Sigma selection process, describes a Six Sigma project in a higher educational institution and presents a weighted scorecard approach for project selection. Design/Methodology/Approach: A case study of the Six Sigma approach being used to improve student support at a university computer help…

  19. sigma54-Mediated control of the mannose phosphotransferase sytem in Lactobacillus plantarum impacts on carbohydrate metabolism

    NARCIS (Netherlands)

    Stevens, M.J.A.; Molenaar, D.; Jong, de A.; Vos, de W.M.; Kleerebezem, M.

    2010-01-01

    Sigma factors direct specific binding of the bacterial RNA polymerase to the promoter. Here we present the elucidation of the sigma(54 ) regulon in Lactobacillus plantarum. A sequence-based regulon prediction of sigma(54)-dependent promoters revealed an operon encoding a mannose phosphotransferase

  20. sigma(54)-mediated control of the mannose phosphotransferase sytem in Lactobacillus plantarum impacts on carbohydrate metabolism

    NARCIS (Netherlands)

    Stevens, Marc J. A.; Molenaar, Douwe; de Jong, Anne; De Vos, Willem M.; Kleerebezem, Michiel

    Sigma factors direct specific binding of the bacterial RNA polymerase to the promoter. Here we present the elucidation of the sigma(54) regulon in Lactobacillus plantarum. A sequence-based regulon prediction of sigma(54)-dependent promoters revealed an operon encoding a mannose phosphotransferase

  1. Robust sigma delta converters : and their application in low-power highly-digitized flexible receivers

    NARCIS (Netherlands)

    Veldhoven, van R.H.M.; Roermund, van A.H.M.

    2011-01-01

    Sigma Delta converters are a very popular choice for the A/D converter in multi-standard, mobile and cellular receivers. Key A/D converter specifications are high dynamic range, robustness, scalability, low-power and low EMI. Robust Sigma Delta Converters presents a requirement derivation of a Sigma

  2. Inhibition of tumor cell growth by Sigma1 ligand mediated translational repression

    International Nuclear Information System (INIS)

    Kim, Felix J.; Schrock, Joel M.; Spino, Christina M.; Marino, Jacqueline C.; Pasternak, Gavril W.

    2012-01-01

    Highlights: ► Sigma1 ligand treatment mediates decrease in tumor cell mass. ► Identification of a Sigma1 ligand with reversible translational repressor actions. ► Demonstration of a role for Sigma1 in cellular protein synthesis. -- Abstract: Treatment with sigma1 receptor (Sigma1) ligands can inhibit cell proliferation in vitro and tumor growth in vivo. However, the cellular pathways engaged in response to Sigma1 ligand treatment that contribute to these outcomes remain largely undefined. Here, we show that treatment with putative antagonists of Sigma1 decreases cell mass. This effect corresponds with repressed cap-dependent translation initiation in multiple breast and prostate cancer cell lines. Sigma1 antagonist treatment suppresses phosphorylation of translational regulator proteins p70S6K, S6, and 4E-BP1. RNAi-mediated knockdown of Sigma1 also results in translational repression, consistent with the effects of antagonist treatment. Sigma1 antagonist mediated translational repression and decreased cell size are both reversible. Together, these data reveal a role for Sigma1 in tumor cell protein synthesis, and demonstrate that small molecule Sigma1 ligands can be used as modulators of protein translation.

  3. Definition of the sigma(W) Regulon of Bacillus subtilis in the Absence of Stress

    NARCIS (Netherlands)

    Zweers, Jessica C.; Nicolas, Pierre; Wiegert, Thomas; van Dijl, Jan Maarten; Denham, Emma L.

    2012-01-01

    Bacteria employ extracytoplasmic function (ECF) sigma factors for their responses to environmental stresses. Despite intensive research, the molecular dissection of ECF sigma factor regulons has remained a major challenge due to overlaps in the ECF sigma factor-regulated genes and the stimuli that

  4. Numerical Simulations of Slow Stick Slip Events with PFC, a DEM Based Code

    Science.gov (United States)

    Ye, S. H.; Young, R. P.

    2017-12-01

    Nonvolcanic tremors around subduction zone have become a fascinating subject in seismology in recent years. Previous studies have shown that the nonvolcanic tremor beneath western Shikoku is composed of low frequency seismic waves overlapping each other. This finding provides direct link between tremor and slow earthquakes. Slow stick slip events are considered to be laboratory scaled slow earthquakes. Slow stick slip events are traditionally studied with direct shear or double direct shear experiment setup, in which the sliding velocity can be controlled to model a range of fast and slow stick slips. In this study, a PFC* model based on double direct shear is presented, with a central block clamped by two side blocks. The gauge layers between the central and side blocks are modelled as discrete fracture networks with smooth joint bonds between pairs of discrete elements. In addition, a second model is presented in this study. This model consists of a cylindrical sample subjected to triaxial stress. Similar to the previous model, a weak gauge layer at a 45 degrees is added into the sample, on which shear slipping is allowed. Several different simulations are conducted on this sample. While the confining stress is maintained at the same level in different simulations, the axial loading rate (displacement rate) varies. By varying the displacement rate, a range of slipping behaviour, from stick slip to slow stick slip are observed based on the stress-strain relationship. Currently, the stick slip and slow stick slip events are strictly observed based on the stress-strain relationship. In the future, we hope to monitor the displacement and velocity of the balls surrounding the gauge layer as a function of time, so as to generate a synthetic seismogram. This will allow us to extract seismic waveforms and potentially simulate the tremor-like waves found around subduction zones. *Particle flow code, a discrete element method based numerical simulation code developed by

  5. Intuitive Understanding of sigma Delocalization in Loose and sigma Localization in Tight Helical Conformations of an Oligosilane Chain

    Czech Academy of Sciences Publication Activity Database

    Jovanovic, M.; Antic, D.; Rooklin, D.; Bande, A.; Michl, Josef

    2017-01-01

    Roč. 12, č. 11 (2017), s. 1250-1263 ISSN 1861-4728 Institutional support: RVO:61388963 Keywords : electron delocalization * electron localization * electronic states * oligosilanes * sigma conjugation Subject RIV: CC - Organic Chemistry OBOR OECD: Organic chemistry Impact factor: 4.083, year: 2016

  6. Loop calculations in quantum-mechanical non-linear sigma models sigma models with fermions and applications to anomalies

    NARCIS (Netherlands)

    Boer, Jan de; Peeters, Bas; Skenderis, Kostas; Nieuwenhuizen, Peter van

    1995-01-01

    We construct the path integral for one-dimensional non-linear sigma models, starting from a given Hamiltonian operator and states in a Hilbert space. By explicit evaluation of the discretized propagators and vertices we find the correct Feynman rules which differ from those often assumed. These

  7. Thermal analysis and improvement of cascode GaN device package for totem-pole bridgeless PFC rectifier

    International Nuclear Information System (INIS)

    She, Shuojie; Zhang, Wenli; Liu, Zhengyang; Lee, Fred C.; Huang, Xiucheng; Du, Weijing; Li, Qiang

    2015-01-01

    The totem-pole bridgeless power factor correction (PFC) rectifier has a simpler topology and higher efficiency than other boost-type bridgeless PFC rectifiers. Its promising performance is enabled by using high-voltage gallium nitride (GaN) high-electron-mobility transistors, which have considerably better figures of merit (e.g., lower reverse recovery charges and less switching losses) than the state-of-the-art silicon metal-oxide-semiconductor field-effect transistors. Cascode GaN devices in traditional packages, i.e., the TO-220 and power quad flat no-lead, are used in the totem-pole PFC boost rectifier. But the parasitic inductances induced by the traditional packages not only significantly deteriorate the switching characteristics of the discrete GaN device but also adversely affect the performance of the built PFC rectifier. A new stack-die packaging structure with an embedded capacitor has been introduced and proven to be efficient in reducing parasitic ringing at the turn-off transition and achieving true zero-voltage-switching turn-on. However, the thermal dissipation capability of the device packaged in this configuration becomes a limitation on further pushing the operating frequency and the output current level for high-efficiency power conversion. This paper focuses on the thermal analysis of the cascode GaN devices in different packages and the GaN-based multichip module used in a two-phase totem-pole bridgeless PFC boost rectifier. A series of thermal models are built based on the actual structures and materials of the packaged devices to evaluate their thermal performance. Finite element analysis (FEA) simulation results of the cascode GaN device in a flip-chip format demonstrate the possibility of increasing the device switching speed while maintaining the peak temperature of the device below 125 °C. Thermal analysis of the GaN-based power module in a very similar structure is also conducted using the FEA method. Experimental data measured using

  8. THE SUBSTELLAR POPULATION OF {sigma} ORIONIS: A DEEP WIDE SURVEY

    Energy Technology Data Exchange (ETDEWEB)

    Bejar, V. J. S.; Rebolo, R. [Instituto de Astrofisica de Canarias, E-38205 La Laguna, Tenerife (Spain); Zapatero Osorio, M. R.; Martin, E. L. [Centro de Astrobiologia (INTA-CSIC), Crta. Ajalvir km 4, E-28850 Torrejon de Ardoz, Madrid (Spain); Caballero, J. A.; Barrado, D. [Centro de Astrobiologia (INTA-CSIC), ESAC campus, P.O. Box 78, E-28691 Villanueva de la Canada, Madrid (Spain); Mundt, R.; Bailer-Jones, C. A. L., E-mail: vbejar@iac.es, E-mail: mosorio@cab.inta-csic.es, E-mail: ege@cab.inta-csic.es, E-mail: rrl@iac.es, E-mail: caballero@cab.inta-csic.es, E-mail: barrado@cab.inta-csic.es, E-mail: mundt@mpia.de, E-mail: calj@mpia.de [Max-Planck-Institut fuer Astronomie, Koenigstuhl 17, D-69117 Heidelberg (Germany)

    2011-12-10

    We present a deep I, Z photometric survey covering a total area of 1.12 deg{sup 2} of the {sigma} Orionis cluster and reaching completeness magnitudes of I = 22 and Z = 21.5 mag. From I, I - Z color-magnitude diagrams we have selected 153 candidates that fit the previously known sequence of the cluster. They have magnitudes in the range I = 16-23 mag, which corresponds to a mass interval from 0.1 down to 0.008 M{sub Sun} at the most probable age of {sigma} Orionis (2-4 Myr). Using J-band photometry, we find that 124 of the 151 candidates within the completeness of the optical survey (82%) follow the previously known infrared photometric sequence of the cluster and are probably members. We have studied the spatial distribution of the very low mass stars and brown dwarf population of the cluster and found that there are objects located at distances greater than 30 arcmin to the north and west of {sigma} Orionis that probably belong to different populations of the Orion's Belt. For the 102 bona fide {sigma} Orionis cluster member candidates, we find that the radial surface density can be represented by a decreasing exponential function ({sigma}={sigma}{sub 0}e{sup -r/r{sub 0}}) with a central density of {sigma}{sub 0} = 0.23 {+-} 0.03 objects arcmin{sup -2} and a characteristic radius of r{sub 0} = 9.5 {+-} 0.7 arcmin. From a statistical comparison with Monte Carlo simulations, we conclude that the spatial distribution of the objects located at the same distance from the center of the cluster is compatible with a Poissonian distribution and, hence, that very low mass stars and brown dwarfs are not mainly forming aggregations or sub-clustering. Using near-infrared JHK-band data from Two Micron All Sky Survey and UKIRT Deep Infrared Sky Survey and mid-infrared data from Infrared Array Camera/Spitzer, we find that about 5%-9% of the brown dwarf candidates in the {sigma} Orionis cluster have K-band excesses and 30% {+-} 7% of them show mid-infrared excesses at

  9. Fixed points of quantum gravity

    OpenAIRE

    Litim, D F

    2003-01-01

    Euclidean quantum gravity is studied with renormalisation group methods. Analytical results for a non-trivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameter in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

  10. Effect of Physical Activity on Symptoms of Morphine Addiction in Rats, after and before of Lesion of the mPFC Area

    Directory of Open Access Journals (Sweden)

    Vajiheh Saedi-Marghmaleki

    2013-10-01

    Administration of morphine as aforementioned, and treadmill running on rats with mPFC area, significantly alleviated some of the symptoms and signs, such as, bruxism, cycling, body lift, licking, standing and scratching (P

  11. Comparative Evaluation of Three-Phase Isolated Matrix-Type PFC Rectifier Concepts for High Efficiency 380VDC Supplies of Future Telco and Data Centers

    DEFF Research Database (Denmark)

    Cortes, Patricio; Bortis, Dominik; Pittini, Riccardo

    2014-01-01

    rectifier and in many cases a mains transformer is used to provide galvanic isolation. In order to achieve a high efficiency in the DC voltage generation and to implement the required isolation, a single-stage concept, such as a matrix-type rectifier that enables PFC functionality and galvanic isolation...... in a single conversion, can be beneficial. In addition, due to the fact that with the matrix-type rectifier the galvanic isolation is performed with a high-frequency transformer, this results in a more compact rectifier system compared to conventional systems where the mains-frequency isolation transformer...... is located at the input of the PFC rectifier. In this paper, an overview of isolated matrix-type PFC rectifier topologies is given and a new converter circuit is proposed, analyzed and comparatively evaluated against another promising PFC rectifier concept, the phase-modular IMY-rectifier....

  12. Six Sigma: not for the faint of heart.

    Science.gov (United States)

    Benedetto, Anthony R

    2003-01-01

    Six Sigma is an excellent quality and performance improvement tool. Like any tool, the results of using it are highly dependent on whether you use it with competence and on the right problem. This article will help you decide if your problem is well-suited for a Six Sigma approach and will suggest the optimum approach for planning and implementing Six Sigma methodology. Performance improvement methods can be grouped into two broad categories, based on the problem to be addressed. When the problem is relatively minor and localized, "evolutionary" methods may be suitable (e.g., quality circles, problem-solving staff meetings, continuous quality improvement [CQI], total quality management [TQM]). These tools work best when modest incremental improvements are sought, when major process redesign is not thought to be necessary, and when the avoidance of workplace disruption is desired. Reengineering and Six Sigma are the best-known examples of the "revolutionary" performance improvement methods. These methods should be used when major (drastic, do or die, etc.) improvements are needed. Problems that cross departmental boundaries need these methods. When a process is so dysfunctional that you feel like you need to tear up the standard operating procedure (SOP) and start all over again, you need a revolutionary method. A Six Sigma project requires a major expenditure of money and employee time, and a willingness to make some hard decisions about jobs, employee retention and relationships among stakeholders. An institution's culture should be considered as part of the decision about using Six Sigma. If the institution has a history of making data-driven decisions, or at least has displayed openness to operating in that manner, Six Sigma has a good chance of success. A radiology-driven Six Sigma project should not be undertaken until a comprehensive written description of the scope of the project is approved by the radiology department leadership team and by the appropriate

  13. Ab initio calculation of the electronic structures of the (7)Sigma+ ground and A (7)Pi and a (5)Sigma+ excited states of MnH.

    Science.gov (United States)

    Tomonari, Mutsumi; Nagashima, Umpei; Hirano, Tsuneo

    2009-04-21

    Electronic structures and molecular constants of the ground (7)Sigma(+) and low-lying A (7)Pi and a (5)Sigma(+) electronic excited states of the MnH molecule were studied by multireference single and double excitation configuration interaction (MR-SDCI) with Davidson's correction (+Q) calculations under exact C(infinity v) symmetry using Slater-type basis sets. To correctly describe the (7)Sigma(+) electronic ground state, X (7)Sigma(+), at the MR-SDCI+Q calculation, we employed a large number of reference configurations in terms of the state-averaged complete active space self-consistent field (CASSCF) orbitals, taking into account the contribution from the B (7)Sigma(+) excited state. The A (7)Pi and a (5)Sigma(+) states can well be described by the MR-SDCI wave functions based on the CASSCF orbitals obtained for the lowest state only. In the MR-SDCI+Q, calculations of the X (7)Sigma(+), A (7)Pi, and a (5)Sigma(+) states required 16, 7, and 17 reference configurations, respectively. Molecular constants, i.e., r(e) and omega(e) of these states and excitation energy from the X (7)Sigma(+) state, obtained at the MR-SDCI+Q level, showed a good agreement with experimental values. The small remaining differences may be accounted for by taking relativistic effects into account.

  14. Production of n-bar's and Sigma-bar+-'s in e+e- annihilations

    International Nuclear Information System (INIS)

    Ferguson, T.; Buchanan, C.; Nodulman, L.; Poster, R.; Breidenbach, M.; Morehouse, C.C.; Vannucci, F.

    1979-01-01

    The production of antineutrons and charged Sigma-bar's in e + e - annihilations has been measured at √s +- production between 4 and 7 GeV is consistent with simple expectations for charmed-baryon production. A search for the decays Lambda-bar - /sub c/ → Sigma-bar +- π -+ π - and Sigma-baratsup asteriskat/sub c//Sigma-bar/sub c/ → Lambda-bar - /sub c/π +- yields no significant peaks. An upper limit, at the 90% confidence level, of sigmaatsub Lambda-baratc-italicB (Lambda-bar/sub c/ → Sigma-bar +- π -+ π - ) < 56 pb is set

  15. Sinorhizobium meliloti sigma factors RpoE1 and RpoE4 are activated in stationary phase in response to sulfite.

    Directory of Open Access Journals (Sweden)

    Bénédicte Bastiat

    Full Text Available Rhizobia are soil bacteria able to establish a nitrogen-fixing symbiosis with legume plants. Both in soil and in planta, rhizobia spend non-growing periods resembling the stationary phase of in vitro-cultured bacteria. The primary objective of this work was to better characterize gene regulation in this biologically relevant growth stage in Sinorhizobium meliloti. By a tap-tag/mass spectrometry approach, we identified five sigma factors co-purifying with the RNA polymerase in stationary phase: the general stress response regulator RpoE2, the heat shock sigma factor RpoH2, and three extra-cytoplasmic function sigma factors (RpoE1, RpoE3 and RpoE4 belonging to the poorly characterized ECF26 subgroup. We then showed that RpoE1 and RpoE4 i are activated upon metabolism of sulfite-generating compounds (thiosulfate and taurine, ii display overlapping regulatory activities, iii govern a dedicated sulfite response by controlling expression of the sulfite dehydrogenase SorT, iv are activated in stationary phase, likely as a result of endogenous sulfite generation during bacterial growth. We showed that SorT is required for optimal growth of S. meliloti in the presence of sulfite, suggesting that the response governed by RpoE1 and RpoE4 may be advantageous for bacteria in stationary phase either by providing a sulfite detoxification function or by contributing to energy production through sulfite respiration. This paper therefore reports the first characterization of ECF26 sigma factors, the first description of sigma factors involved in control of sulphur metabolism, and the first indication that endogenous sulfite may act as a signal for regulation of gene expression upon entry of bacteria in stationary phase.

  16. CERN: Fixed target targets

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1993-03-15

    Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become visible for the first

  17. IMPROVE MACHINING PROCESS CAPABILITY BY USING SIX-SIGMA

    Directory of Open Access Journals (Sweden)

    Sanjit Ray

    2011-06-01

    Full Text Available Abstract: Six-Sigma is an improvement strategy for achieving customer satisfaction by reducing variation and thus producing products and services better, faster and cheaper. This study presents a Six-Sigma project of an automotive plant illustrating how the DMAIC methodology and statistical techniques were applied to resolve the issue of manufacturing process capability. This project has substantially benefit ted the organization by reducing the variation of bore size of crank case, achieving zero rejection and improving the on time delivery. By using appropriate qualitative and quantitative tools in different phases of the DMAIC methodology, the critical output, key process inputs and root causes were identified, analyzed and validated. This project methodology can be used in general to reduce process variation for any other manufacturing processes as well, which will help in improving customer satisfaction.

  18. Generalized complex geometry, generalized branes and the Hitchin sigma model

    International Nuclear Information System (INIS)

    Zucchini, Roberto

    2005-01-01

    Hitchin's generalized complex geometry has been shown to be relevant in compactifications of superstring theory with fluxes and is expected to lead to a deeper understanding of mirror symmetry. Gualtieri's notion of generalized complex submanifold seems to be a natural candidate for the description of branes in this context. Recently, we introduced a Batalin-Vilkovisky field theoretic realization of generalized complex geometry, the Hitchin sigma model, extending the well known Poisson sigma model. In this paper, exploiting Gualtieri's formalism, we incorporate branes into the model. A detailed study of the boundary conditions obeyed by the world sheet fields is provided. Finally, it is found that, when branes are present, the classical Batalin-Vilkovisky cohomology contains an extra sector that is related non trivially to a novel cohomology associated with the branes as generalized complex submanifolds. (author)

  19. Sv-map between type I and heterotic sigma models

    Science.gov (United States)

    Fan, Wei; Fotopoulos, A.; Stieberger, S.; Taylor, T. R.

    2018-05-01

    The scattering amplitudes of gauge bosons in heterotic and open superstring theories are related by the single-valued projection which yields heterotic amplitudes by selecting a subset of multiple zeta value coefficients in the α‧ (string tension parameter) expansion of open string amplitudes. In the present work, we argue that this relation holds also at the level of low-energy expansions (or individual Feynman diagrams) of the respective effective actions, by investigating the beta functions of two-dimensional sigma models describing world-sheets of open and heterotic strings. We analyze the sigma model Feynman diagrams generating identical effective action terms in both theories and show that the heterotic coefficients are given by the single-valued projection of the open ones. The single-valued projection appears as a result of summing over all radial orderings of heterotic vertices on the complex plane representing string world-sheet.

  20. T^{\\sigma}_{\\rho}(G) Theories and Their Hilbert Series

    CERN Document Server

    Cremonesi, Stefano; Mekareeya, Noppadol; Zaffaroni, Alberto

    2015-01-01

    We give an explicit formula for the Higgs and Coulomb branch Hilbert series for the class of 3d N=4 superconformal gauge theories T^{\\sigma}_{\\rho}(G) corresponding to a set of D3 branes ending on NS5 and D5-branes, with or without O3 planes. Here G is a classical group, \\sigma is a partition of G and \\rho a partition of the dual group G^\\vee. In deriving such a formula we make use of the recently discovered formula for the Hilbert series of the quantum Coulomb branch of N=4 superconformal theories. The result can be expressed in terms of a generalization of a class of symmetric functions, the Hall-Littlewood polynomials, and can be interpreted in mathematical language in terms of localization. We mainly consider the case G=SU(N) but some interesting results are also given for orthogonal and symplectic groups.

  1. Six sigma for organizational excellence a statistical approach

    CERN Document Server

    Muralidharan, K

    2015-01-01

    This book discusses the integrated concepts of statistical quality engineering and management tools. It will help readers to understand and apply the concepts of quality through project management and technical analysis, using statistical methods. Prepared in a ready-to-use form, the text will equip practitioners to implement the Six Sigma principles in projects. The concepts discussed are all critically assessed and explained, allowing them to be practically applied in managerial decision-making, and in each chapter, the objectives and connections to the rest of the work are clearly illustrated. To aid in understanding, the book includes a wealth of tables, graphs, descriptions and checklists, as well as charts and plots, worked-out examples and exercises. Perhaps the most unique feature of the book is its approach, using statistical tools, to explain the science behind Six Sigma project management and integrated in engineering concepts. The material on quality engineering and statistical management tools of...

  2. LEAN AND SIX SIGMA CONCEPTS APPLICATION IN PHARMACEUTICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katarina Pavlović

    2012-03-01

    Full Text Available LEAN thinking and Six Sigma have been utilized by manufacturing industries to decrease cost and improve quality and productivity by reducing variation and production defects [1]. Because of the dramatic successes in manufacturing, there is rising interest among companies in the pharmaceutical industry, which chooses to implement LEAN in order to accomplish such goals as decreased wait time to release product to the market, reduce production waste, and improve communication with end users and raize quality level both in the production and in testing laboratories. In this article, basics of LEAN and Six Sigma are presented and suggestion was given for application of their concepts in pharmaceutical industry together with harmonization with legal regulation represented by requirements Good Manufacturing Practice (cGMP, in order to work "smarter", more cost-effectively and avoid was ting time and other resources.

  3. LEAN AND SIX SIGMA CONCEPTS - APPLICATION IN PHARMACEUTICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katarina Pavlović

    2011-06-01

    Full Text Available LEAN thinking and Six Sigma have been utilized by manufacturing industries to decrease cost and improve quality and productivity by reducing variation and production defects. Because of the dramatic successes in manufacturing, there is rising interest among companies in the pharmaceutical industry, which choose to implement LEAN in order to accomplish such goals as decreased wait time to release product to the market, reduce production waste, improve communication with end users and raise quality level both in the production and in testing laboratories. In this article, basics of LEAN and Six Sigma are presented and suggestion was given for application of their concepts in pharmaceutical industry together with harmonization with legal regulation represented by requirements Good Manufacturing Practice (cGMP, in order to work "smarter", more cost- effectively and avoid wasting time and other resources.

  4. Pseudo-random number generator for the Sigma 5 computer

    Science.gov (United States)

    Carroll, S. N.

    1983-01-01

    A technique is presented for developing a pseudo-random number generator based on the linear congruential form. The two numbers used for the generator are a prime number and a corresponding primitive root, where the prime is the largest prime number that can be accurately represented on a particular computer. The primitive root is selected by applying Marsaglia's lattice test. The technique presented was applied to write a random number program for the Sigma 5 computer. The new program, named S:RANDOM1, is judged to be superior to the older program named S:RANDOM. For applications requiring several independent random number generators, a table is included showing several acceptable primitive roots. The technique and programs described can be applied to any computer having word length different from that of the Sigma 5.

  5. Multi-Agent Modeling in Managing Six Sigma Projects

    Directory of Open Access Journals (Sweden)

    K. Y. Chau

    2009-10-01

    Full Text Available In this paper, a multi-agent model is proposed for considering the human resources factor in decision making in relation to the six sigma project. The proposed multi-agent system is expected to increase the acccuracy of project prioritization and to stabilize the human resources service level. A simulation of the proposed multiagent model is conducted. The results show that a multi-agent model which takes into consideration human resources when making decisions about project selection and project team formation is important in enabling efficient and effective project management. The multi-agent modeling approach provides an alternative approach for improving communication and the autonomy of six sigma projects in business organizations.

  6. Brane solutions of a spherical sigma model in six dimensions

    International Nuclear Information System (INIS)

    Lee, Hyun Min; Papazoglou, Antonios

    2005-01-01

    We explore solutions of six-dimensional gravity coupled to a non-linear sigma model, in the presence of codimension-two branes. We investigate the compactifications induced by a spherical scalar manifold and analyze the conditions under which they are of finite volume and singularity free. We discuss the issue of single-valuedness of the scalar fields and provide some special embedding of the scalar manifold to the internal space which solves this problem. These brane solutions furnish some self-tuning features, however they do not provide a satisfactory explanation of the vanishing of the effective four-dimensional cosmological constant. We discuss the properties of this model in relation with the self-tuning example based on a hyperbolic sigma model

  7. Rethinking behavioral health processes by using design for six sigma.

    Science.gov (United States)

    Lucas, Anthony G; Primus, Kelly; Kovach, Jamison V; Fredendall, Lawrence D

    2015-02-01

    Clinical evidence-based practices are strongly encouraged and commonly utilized in the behavioral health community. However, evidence-based practices that are related to quality improvement processes, such as Design for Six Sigma, are often not used in behavioral health care. This column describes the unique partnership formed between a behavioral health care provider in the greater Pittsburgh area, a nonprofit oversight and monitoring agency for behavioral health services, and academic researchers. The authors detail how the partnership used the multistep process outlined in Design for Six Sigma to completely redesign the provider's intake process. Implementation of the redesigned process increased access to care, decreased bad debt and uncollected funds, and improved cash flow--while consumer satisfaction remained high.

  8. Lean six sigma implementation in a yarn textile industry

    Directory of Open Access Journals (Sweden)

    Rayra Rodrigues Nogueira

    2017-06-01

    Full Text Available Due to fierce competition from companies in achieving larger market share, there is an increasing interest regarding cost reduction, efficiency in business and processes, increase in quality and continuous improvement. Given these situations, companies are adopting some practices which seek to improve their strategies, increase understanding of the needs of their customers and promote business growth, the Lean Manufacturing and Six Sigma programs were adopted in order to enable businesses to succeed in achieving continuous improvement in their business. This paper presents a case study of a textile yarn industry which, in order to increase the sales of the business and the elimination of waste, used the methodology of Lean Six Sigma Program based on DMAIC method to assist in achieving these goals.

  9. Applying a Hybrid MCDM Model for Six Sigma Project Selection

    Directory of Open Access Journals (Sweden)

    Fu-Kwun Wang

    2014-01-01

    Full Text Available Six Sigma is a project-driven methodology; the projects that provide the maximum financial benefits and other impacts to the organization must be prioritized. Project selection (PS is a type of multiple criteria decision making (MCDM problem. In this study, we present a hybrid MCDM model combining the decision-making trial and evaluation laboratory (DEMATEL technique, analytic network process (ANP, and the VIKOR method to evaluate and improve Six Sigma projects for reducing performance gaps in each criterion and dimension. We consider the film printing industry of Taiwan as an empirical case. The results show that our study not only can use the best project selection, but can also be used to analyze the gaps between existing performance values and aspiration levels for improving the gaps in each dimension and criterion based on the influential network relation map.

  10. Low-energy limit of the extended Linear Sigma Model

    Energy Technology Data Exchange (ETDEWEB)

    Divotgey, Florian [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); Kovacs, Peter [Wigner Research Center for Physics, Hungarian Academy of Sciences, Institute for Particle and Nuclear Physics, Budapest (Hungary); GSI Helmholtzzentrum fuer Schwerionenforschung, ExtreMe Matter Institute, Darmstadt (Germany); Giacosa, Francesco [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); Jan-Kochanowski University, Institute of Physics, Kielce (Poland); Rischke, Dirk H. [Johann Wolfgang Goethe-Universitaet, Institut fuer Theoretische Physik, Frankfurt am Main (Germany); University of Science and Technology of China, Interdisciplinary Center for Theoretical Study and Department of Modern Physics, Hefei, Anhui (China)

    2018-01-15

    The extended Linear Sigma Model is an effective hadronic model based on the linear realization of chiral symmetry SU(N{sub f}){sub L} x SU(N{sub f}){sub R}, with (pseudo)scalar and (axial-)vector mesons as degrees of freedom. In this paper, we study the low-energy limit of the extended Linear Sigma Model (eLSM) for N{sub f} = flavors by integrating out all fields except for the pions, the (pseudo-)Nambu-Goldstone bosons of chiral symmetry breaking. The resulting low-energy effective action is identical to Chiral Perturbation Theory (ChPT) after choosing a representative for the coset space generated by chiral symmetry breaking and expanding it in powers of (derivatives of) the pion fields. The tree-level values of the coupling constants of the effective low-energy action agree remarkably well with those of ChPT. (orig.)

  11. Ward Identity and Scattering Amplitudes for Nonlinear Sigma Models

    Science.gov (United States)

    Low, Ian; Yin, Zhewei

    2018-02-01

    We present a Ward identity for nonlinear sigma models using generalized nonlinear shift symmetries, without introducing current algebra or coset space. The Ward identity constrains correlation functions of the sigma model such that the Adler's zero is guaranteed for S -matrix elements, and gives rise to a subleading single soft theorem that is valid at the quantum level and to all orders in the Goldstone decay constant. For tree amplitudes, the Ward identity leads to a novel Berends-Giele recursion relation as well as an explicit form of the subleading single soft factor. Furthermore, interactions of the cubic biadjoint scalar theory associated with the single soft limit, which was previously discovered using the Cachazo-He-Yuan representation of tree amplitudes, can be seen to emerge from matrix elements of conserved currents corresponding to the generalized shift symmetry.

  12. DEPLOYMENT OF SIX SIGMA METHODOLOGY IN PHACOEMULSIFICATION CATARACT SURGERY

    Directory of Open Access Journals (Sweden)

    Ibrahim SAHBAZ

    2014-04-01

    Full Text Available The purpose of this study is to show how a public eye care center in Turkey initiated Six Sigma principles to reduce the number of complications encountered during and after phacoemulsification cataract surgeries. To analyze the 3-year data, main tools of Six Sigma’s Define-Measure-Analyze-Improve-Control (DMAIC improvement cycle such as SIPOC table, Fishbone Diagram and, Failure, Mode and Effect Analysis were implemented. Experience of the ophthalmic surgeon, patient’s anatomy, cooperation of patient during the surgery, sterilization and hygiene, attention of assistant surgeon, calibration of equipment and quality/chemical composition of intraocular material were identified to be Critical-to-Quality (CTQ factors for a successful phacoemulsification cataract surgery. The most frequently occurring complication was found to be iris atrophy. The process sigma level for the process was found to be 3.958.

  13. DEVELOPMENT OF SIX SIGMA INFRASTRUCTURE FOR STRABISMUS SURGERIES

    Directory of Open Access Journals (Sweden)

    Mehmet Tolga Taner

    2014-01-01

    Full Text Available The purpose of this study is to show how a private eye care center in Turkey developed a Six Sigma infrastructure to investigate the root causes of complications occuring during strabismus surgeries. To analyze the collected data, main tools of Six Sigma’s Define-Measure-Analyze-Improve-Control (DMAIC improvement cycle such as SIPOC table, Fishbone Diagram and, Failure, Mode and Effect Analysis were implemented. Patient’s eye anatomy, experience of the anesthesiologist, experience/attention of the strabismus surgeon was identified to be Critical-to-Quality (CTQ factors for a successful strabismus surgery. The most frequent complications of strabismus surgeries were found to be X, Y and Z. The process sigma level was found to be 3.2025.

  14. Geometry of surfaces associated to Grassmannian sigma models

    International Nuclear Information System (INIS)

    Delisle, L; Hussin, V; Zakrzewski, W J

    2015-01-01

    We investigate the geometric characteristics of constant Gaussian curvature surfaces obtained from solutions of the G(m, n) sigma model. Most of these solutions are related to the Veronese sequence. We show that we can distinguish surfaces with the same Gaussian curvature using additional quantities like the topological charge and the mean curvature. The cases of G(1,n) = CP n-1 and G(2,n) are used to illustrate these characteristics. (paper)

  15. Sigma models with purely Wess-Zumino-Witten actions

    International Nuclear Information System (INIS)

    Floreanini, R.; Percacci, R.; Sezgin, E.

    1988-11-01

    We study the dynamics of sigma models in arbitrary dimensions with purely Wess-Zumino-Witten actions (i.e. without kinetic terms), both from the Lagrangian and Hamiltonian point of view. These models have nontrivial gauge groups which contain the diffeomorphisms of space-time, as well as symmetry groups which in many cases turn out to be infinite dimensional. We give examples in 1,2,3 and 4 space-time dimensions.(author). 9 refs

  16. Superfield Lax formalism of supersymmetric sigma model on symmetric spaces

    International Nuclear Information System (INIS)

    Saleem, U.; Hassan, M.

    2006-01-01

    We present a superfield Lax formalism of the superspace sigma model based on the target space G/H and show that a one-parameter family of flat superfield connections exists if the target space G/H is a symmetric space. The formalism has been related to the existence of an infinite family of local and non-local superfield conserved quantities. A few examples have been given to illustrate the results. (orig.)

  17. Does the {sigma}(1580)((3)/(2)){sup -} resonance exist?

    Energy Technology Data Exchange (ETDEWEB)

    Olmsted, J.; Prakhov, S.; Manley, D.M.; Allgower, C.E.; Bekrenev, V.S.; Briscoe, W.J.; Clajus, M.; Comfort, J.R.; Craig, K.; Grosnick, D.; Isenhower, D.; Knecht, N.; Koetke, D.D.; Kozlenko, N.G.; Kruglov, S.; Kulbardis, A.A.; Lolos, G.; Lopatin, I.V.; Manweiler, R.; Marusic, A.; McDonald, S.; Nefkens, B.M.K.; Papandreou, Z.; Peaslee, D.C.; Phaisangittisakul, N.; Price, J.W.; Ramirez, A.F.; Sadler, M.; Shafi, A.; Spinka, H.; Stanislaus, T.D.S.; Starostin, A.; Staudenmaier, H.M.; Strakovsky, I.I.; Supek, I.; Tippens, W.B

    2004-05-20

    Precise new data for the reaction K{sup -}p{yields}{pi}{sup 0}{lambda} are presented in the c.m. energy range 1565 to 1600 MeV. Our analysis of these data sheds new light on claims for the {sigma}(1580)((3)/(2)){sup -} resonance, which (if it exists with the specified quantum numbers) must be an exotic baryon because of its very low mass. Our results show no evidence for this state.

  18. A community hospital's journey into Lean Six Sigma.

    Science.gov (United States)

    Stuenkel, Kurt; Faulkner, Taunya

    2009-01-01

    The implementation of Lean Six Sigma and 100-day workouts throughout the 304-bed Floyd Medical Center community hospital organization has led to sustainable results and a marked change in culture. The organization-wide learning of such an effort is deep and intehse, and to remain focused and successful it must be a priority of top management. The workout methodology can assist the organization to carry projects to completion and to achieve rapid implementation of desired improvements.

  19. Identification of sigma and chi phases in duplex stainless steels

    Energy Technology Data Exchange (ETDEWEB)

    Llorca-Isern, Núria, E-mail: nullorca@ub.edu [Departament de Ciència dels Materials i Enginyeria Metallurgica, Facultat de Química, Universitat de Barcelona, Marti-Franqués 1, 08028 Barcelona (Spain); López-Luque, Héctor, E-mail: hlopezlu7@alumnes.ub.edu [Departament de Ciència dels Materials i Enginyeria Metallurgica, Facultat de Química, Universitat de Barcelona, Marti-Franqués 1, 08028 Barcelona (Spain); López-Jiménez, Isabel, E-mail: ilopezji9@alumnes.ub.edu [Departament de Ciència dels Materials i Enginyeria Metallurgica, Facultat de Química, Universitat de Barcelona, Marti-Franqués 1, 08028 Barcelona (Spain); Biezma, Maria Victoria, E-mail: maria.biezma@unican.es [Department of Earth, Materials Science and Engineering, University of Cantabria - UC, Gamazo, 1, 39004 Santander (Spain)

    2016-02-15

    The aim of this work is to find out the most suitable method for detecting and analyzing accurately the formation conditions of secondary phases, particularly Sigma-phase (σ-phase) and Chi-phase (χ-phase) in duplex stainless steels (UNS S32205 and UNS S32750). The microstructure was characterized after a solution annealing at 1080 °C followed by an isothermal heating at 830 °C for different time ranges, ranging from 1 min to 9 h, in order to enlighten the controversial point concerning the mechanism of χ-phase nucleation in relation with the σ-phase. Etched samples were observed using optical microscopy (MO), and scanning electron microscopy (FESEM) with a backscattered electron detector (BSE) was used on unetched samples. Compositional microanalysis (EDS) was carried out for identifying the different phases present in the steels. Sigma phase was easily observed using different etching procedures, whereas χ-phase was only clearly detected with FESEM–BSE on unetched samples. The compositional analyses showed that the molybdenum content in χ-phase almost doubles the content of this element in σ-phase, and as a result the kinetics of nucleation and growth were also found to be remarkably faster when the alloy content in the steel is higher. In addition, chromium nitrides and carbides were also observed to precipitate as a result of the heat treatments and, in the case of the chromium nitrides, they act as a favorable site for the nucleation of σ-phase and χ-phase. - Highlights: • Microscopy was used on heat treated duplex steels for microstructure identification. • FESEM–BSE observation on unetched samples provided the best contrast between phases. • Analyses of carbides, nitrides, chi and sigma phases were possible by EDS and WDS. • Chromium nitrides act as favorable site for the nucleation of chi and sigma phases. • Secondary phases nucleation kinetics are faster in superduplex than in duplex steels.

  20. Baryons as solitonic solutions of the chiral sigma model

    International Nuclear Information System (INIS)

    Bentz, W.; Hartmann, J.; Beck, F.

    1996-01-01

    Self-consistent solitonic solutions with baryon number one are obtained in the chiral quark sigma model. The translational invariant vacuum is stabilized by a Landau ghost subtraction procedure based on the requirement of the Kaellacute en-Lehmann (KL) representation for the meson propagators. The connection of this ghost free model (KL model) to the more popular Nambu-Jona-Lasinio (NJL) model is discussed in detail. copyright 1996 The American Physical Society

  1. Kinks, chains, and loop groups in the CPn sigma models

    International Nuclear Information System (INIS)

    Harland, Derek

    2009-01-01

    We consider topological solitons in the CP n sigma models in two space dimensions. In particular, we study 'kinks', which are independent of one coordinate up to a rotation of the target space, and 'chains', which are periodic in one coordinate up to a rotation of the target space. Kinks and chains both exhibit constituents, similar to monopoles and calorons in SU(n) Yang-Mills-Higgs and Yang-Mills theories. We examine the constituent structure using Lie algebras.

  2. Analysis of Lean Six Sigma in the Army Contracting Process

    Science.gov (United States)

    2011-12-01

    xii THIS PAGE INTENTIONALLY LEFT BLANK xiii LIST OF ACRONYMS AND ABBREVIATIONS AC Acquisition Center ACA Army Acquisition Agency ACAT... Utilizing the Results of Lean Six Sigma efforts (www.armyobt.army.mil) The Army mimics the DoD structure for Business Transformation to align with the DoD...understand the marketplace and work collaboratively to clearly describe the government’s requirements in a way that can generate robust competition. 15

  3. Electromagnetic axial anomaly in a generalized linear sigma model

    Science.gov (United States)

    Fariborz, Amir H.; Jora, Renata

    2017-06-01

    We construct the electromagnetic anomaly effective term for a generalized linear sigma model with two chiral nonets, one with a quark-antiquark structure, the other one with a four-quark content. We compute in the leading order of this framework the decays into two photons of six pseudoscalars: π0(137 ), π0(1300 ), η (547 ), η (958 ), η (1295 ) and η (1760 ). Our results agree well with the available experimental data.

  4. 2D Poisson sigma models with gauged vectorial supersymmetry

    Energy Technology Data Exchange (ETDEWEB)

    Bonezzi, Roberto [Dipartimento di Fisica ed Astronomia, Università di Bologna and INFN, Sezione di Bologna,via Irnerio 46, I-40126 Bologna (Italy); Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Sundell, Per [Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Torres-Gomez, Alexander [Departamento de Ciencias Físicas, Universidad Andres Bello,Republica 220, Santiago (Chile); Instituto de Ciencias Físicas y Matemáticas, Universidad Austral de Chile-UACh,Valdivia (Chile)

    2015-08-12

    In this note, we gauge the rigid vectorial supersymmetry of the two-dimensional Poisson sigma model presented in arXiv:1503.05625. We show that the consistency of the construction does not impose any further constraints on the differential Poisson algebra geometry than those required for the ungauged model. We conclude by proposing that the gauged model provides a first-quantized framework for higher spin gravity.

  5. Towards Resolving the Crab Sigma-Problem: A Linear Accelerator?

    Science.gov (United States)

    Contopoulos, Ioannis; Kazanas, Demosthenes; White, Nicholas E. (Technical Monitor)

    2002-01-01

    Using the exact solution of the axisymmetric pulsar magnetosphere derived in a previous publication and the conservation laws of the associated MHD flow, we show that the Lorentz factor of the outflowing plasma increases linearly with distance from the light cylinder. Therefore, the ratio of the Poynting to particle energy flux, generically referred to as sigma, decreases inversely proportional to distance, from a large value (typically approx. greater than 10(exp 4)) near the light cylinder to sigma approx. = 1 at a transition distance R(sub trans). Beyond this distance the inertial effects of the outflowing plasma become important and the magnetic field geometry must deviate from the almost monopolar form it attains between R(sub lc), and R(sub trans). We anticipate that this is achieved by collimation of the poloidal field lines toward the rotation axis, ensuring that the magnetic field pressure in the equatorial region will fall-off faster than 1/R(sup 2) (R being the cylindrical radius). This leads both to a value sigma = a(sub s) much less than 1 at the nebular reverse shock at distance R(sub s) (R(sub s) much greater than R(sub trans)) and to a component of the flow perpendicular to the equatorial component, as required by observation. The presence of the strong shock at R = R(sub s) allows for the efficient conversion of kinetic energy into radiation. We speculate that the Crab pulsar is unique in requiring sigma(sub s) approx. = 3 x 10(exp -3) because of its small translational velocity, which allowed for the shock distance R(sub s) to grow to values much greater than R(sub trans).

  6. CERN: Fixed target targets

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become

  7. Contractor Work Preparation Process Improvement Using Lean Six Sigma

    Directory of Open Access Journals (Sweden)

    Asana Kusnadi

    2016-06-01

    Full Text Available To ensure the health and safety of their workforce and protection of their assets and the environment, a global oil and gas company operating in Indonesia requires comprehensive identification and evaluation of job hazards that were included in work permitting process prior work execution in the field. Based on 20 data points obtained in August 2013, start-working time for contractors who worked for Capital Project Management (CPM Team in Facility B was in average at 09.05 a.m. The aim of this paper is to present how the firm implemented Lean Six Sigma to reduce non-added value activities while fulfilling to its safety requirements and to share lessons learned from practical and theory testing perspective. The methodology used is Lean Six Sigma’s DMAIC (Define, Measure, Analyze, Improve, Control as mandated by the corporate policy of the firm. This research adopts a mix-methods approach, by using both qualitative and quantitative data. This study was a one year longitudinal study of the Lean Six Sigma implementation to improve contractors’ work preparation process. The improvement resulted in reduction of non-value added activities and successfully increased the available working time per day by 59.3 minutes in average. The results of this case study reconfirm Lean Six Sigma as a good management theory since it shows a consistency between the theory and the real practice in a global oil and gas company in Indonesia.

  8. Application of Six Sigma Robust Optimization in Sheet Metal Forming

    International Nuclear Information System (INIS)

    Li, Y.Q.; Cui, Z.S.; Ruan, X.Y.; Zhang, D.J.

    2005-01-01

    Numerical simulation technology and optimization method have been applied in sheet metal forming process to improve design quality and shorten design cycle. While the existence of fluctuation in design variables or operation condition has great influence on the quality. In addition to that, iterative solution in numerical simulation and optimization usually take huge computational time or endure expensive experiment cost In order to eliminate effect of perturbations in design and improve design efficiency, a CAE-based six sigma robust design method is developed in this paper. In the six sigma procedure for sheet metal forming, statistical technology and dual response surface approximate model as well as algorithm of 'Design for Six Sigma (DFSS)' are integrated together to perform reliability optimization and robust improvement. A deep drawing process of a rectangular cup is taken as an example to illustrate the method. The optimization solutions show that the proposed optimization procedure not only improves significantly the reliability and robustness of the forming quality, but also increases optimization efficiency with approximate model

  9. Sigma and opioid receptors in human brain tumors

    International Nuclear Information System (INIS)

    Thomas, G.E.; Szuecs, M.; Mamone, J.Y.; Bem, W.T.; Rush, M.D.; Johnson, F.E.; Coscia, C.J.

    1990-01-01

    Human brain tumors and nude mouse-borne human neuroblastomas and gliomas were analyzed for sigma and opioid receptor content. Sigma binding was assessed using [ 3 H] 1, 3-di-o-tolylguanidine (DTG), whereas opioid receptor subtypes were measured with tritiated forms of the following: μ, [D-ala 2 , mePhe 4 , gly-ol 5 ] enkephalin (DAMGE); κ, ethylketocyclazocine (EKC) or U69,593; δ, [D-pen 2 , D-pen 5 ] enkephalin (DPDPE) or [D-ala 2 , D-leu 5 ] enkephalin (DADLE) with μ suppressor present. Binding parameters were estimated by homologous displacement assays followed by analysis using the LIGAND program. Sigma binding was detected in 15 of 16 tumors examined with very high levels found in a brain metastasis from an adenocarcinoma of lung and a human neuroblastoma (SK-N-MC) passaged in nude mice. κ opioid receptor binding was detected in 4 of 4 glioblastoma multiforme specimens and 2 of 2 human astrocytoma cell lines tested but not in the other brain tumors analyzed

  10. Sigma and opioid receptors in human brain tumors

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.E.; Szuecs, M.; Mamone, J.Y.; Bem, W.T.; Rush, M.D.; Johnson, F.E.; Coscia, C.J. (St. Louis Univ. School of Medicine, MO (USA))

    1990-01-01

    Human brain tumors and nude mouse-borne human neuroblastomas and gliomas were analyzed for sigma and opioid receptor content. Sigma binding was assessed using ({sup 3}H) 1, 3-di-o-tolylguanidine (DTG), whereas opioid receptor subtypes were measured with tritiated forms of the following: {mu}, (D-ala{sup 2}, mePhe{sup 4}, gly-ol{sup 5}) enkephalin (DAMGE); {kappa}, ethylketocyclazocine (EKC) or U69,593; {delta}, (D-pen{sup 2}, D-pen{sup 5}) enkephalin (DPDPE) or (D-ala{sup 2}, D-leu{sup 5}) enkephalin (DADLE) with {mu} suppressor present. Binding parameters were estimated by homologous displacement assays followed by analysis using the LIGAND program. Sigma binding was detected in 15 of 16 tumors examined with very high levels found in a brain metastasis from an adenocarcinoma of lung and a human neuroblastoma (SK-N-MC) passaged in nude mice. {kappa} opioid receptor binding was detected in 4 of 4 glioblastoma multiforme specimens and 2 of 2 human astrocytoma cell lines tested but not in the other brain tumors analyzed.

  11. Study of Sigma Phase in Duplex SAF 2507

    Science.gov (United States)

    Fellicia, D. M.; Sutarsis; Kurniawan, B. A.; Wulanari, D.; Purniawan, A.; Wibisono, A. T.

    2017-05-01

    Super duplex stainless steel is one of the stainless steel which has a combination between high strength properties and excellent corrosion resistance. However, the resistance can decrease by precipitation of sigma phase which is formed at high temperature, for example after welding processes. A series of experiments has been performed to study the effect of solution annealing to existence of sigma phase on super duplex SAF 2507. Variations of solution-annealing temperatures were 1000 °C, 1065 °C and 1125 °C with holding time of 15 and 30 minutes for each temperature. Effect of solution annealing process was characterized by using XRD, SEM, and Optical Microscopy. The result showed precipitation of sigma phase completely dissolved at 1065 °C and 1125 °C because it reformed to austenite. After it was heated at 1065 °C, chromium carbide appeared in ferrite site and grain boundary. The amount of chromium carbide increased with the increasing of solution annealing temperature.

  12. Squashed Toric Sigma Models and Mock Modular Forms

    Science.gov (United States)

    Gupta, Rajesh Kumar; Murthy, Sameer

    2018-05-01

    We study a class of two-dimensional N}=(2,2)} sigma models called squashed toric sigma models, using their Gauged Linear Sigma Models (GLSM) description. These models are obtained by gauging the global {U(1)} symmetries of toric GLSMs and introducing a set of corresponding compensator superfields. The geometry of the resulting vacuum manifold is a deformation of the corresponding toric manifold in which the torus fibration maintains a constant size in the interior of the manifold, thus producing a neck-like region. We compute the elliptic genus of these models, using localization, in the case when the unsquashed vacuum manifolds obey the Calabi-Yau condition. The elliptic genera have a non-holomorphic dependence on the modular parameter {τ} coming from the continuum produced by the neck. In the simplest case corresponding to squashed {C / Z_{2 the elliptic genus is a mixed mock Jacobi form which coincides with the elliptic genus of the {N=(2,2)} {SL(2,R) / U(1)} cigar coset.

  13. National Radiological Fixed Lab Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Radiological Fixed Laboratory Data Asset includes data produced in support of various clients such as other EPA offices, EPA Regional programs, DOE,...

  14. Can mushrooms fix atmospheric nitrogen?

    Indian Academy of Sciences (India)

    Unknown

    Introduction. Rhizobium is a genus of symbiotic N2-fixing soil bacteria that induce ... To produce biofilm cultures, a 2 × 2 cm yeast manitol agar. (YMA) slab was .... determination of antibiotic susceptibilities of bacterial biofilms;. J. Clin. Microbiol.

  15. Elevated Fixed Platform Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Elevated Fixed Platform (EFP) is a helicopter recovery test facility located at Lakehurst, NJ. It consists of a 60 by 85 foot steel and concrete deck built atop...

  16. Thermal isomerizations of ketenimines to nitriles: evaluations of sigma-Dot (sigma(*)) constants for spin-delocalizations

    Science.gov (United States)

    Kim; Zhu; Lee

    2000-05-19

    Rate constants (k(Y)) of the isomerizations of 11 diphenyl N-(substituted benzyl) ketenimines were measured at 40, 50, 60, and 70 degrees C. Activation parameters DeltaH()(Y) and DeltaS()(Y) were obtained using the Eyring equation. The relative rates (k(Y)/k(H)) were fitted into Hammett single correlations (log k(Y)/k(H) = rhosigma and log k(Y)/k(H) = rho(*)sigma(*)). The single correlations have been compared with Hammett dual correlations (log k(Y)/k(H) = rhosigma + rho(*)sigma(*) ). Separate treatments of para and meta substituents yielded even better correlations. Para substituents control the rates through spin-delocalizations and inductive effects. The former outweighs the latter when the latter exerts a modest but distinct influence on the rates. On the other hand, inductive effects are the "major" or the sole interactions triggered by meta substituents.

  17. The C-Terminal RpoN Domain of sigma54 Forms an unpredictedHelix-Turn-Helix Motif Similar to domains of sigma70

    Energy Technology Data Exchange (ETDEWEB)

    Doucleff, Michaeleen; Malak, Lawrence T.; Pelton, Jeffrey G.; Wemmer, David E.

    2005-11-01

    The ''{delta}'' subunit of prokaryotic RNA-polymerase allows gene-specific transcription initiation. Two {sigma} families have been identified, {sigma}{sup 70} and {sigma}{sup 54}, which use distinct mechanisms to initiate transcription and share no detectable sequence homology. Although the {sigma}{sup 70}-type factors have been well characterized structurally by x-ray crystallography, no high-resolution structural information is available for the {sigma}{sup 54}-type factors. Here we present the NMR derived structure of the C-terminal domain of {sigma}{sup 54} from Aquifex aeolicus. This domain (Thr323 to Gly389), which contains the highly conserved RpoN box sequence, consists of a poorly structured N-terminal tail followed by a three-helix bundle, which is surprisingly similar to domains of the {sigma}{sup 70}-type proteins. Residues of the RpoN box, which have previously been shown to be critical for DNA binding, form the second helix of an unpredicted helix-turn-helix motif. This structure's homology with other DNA binding proteins, combined with previous biochemical data, suggest how the C-terminal domain of {sigma}{sup 54} binds to DNA.

  18. Combustion Control System Design of Diesel Engine via ASPR based Output Feedback Control Strategy with a PFC

    Science.gov (United States)

    Mizumoto, Ikuro; Tsunematsu, Junpei; Fujii, Seiya

    2016-09-01

    In this paper, a design method of an output feedback control system with a simple feedforward input for a combustion model of diesel engine will be proposed based on the almost strictly positive real-ness (ASPR-ness) of the controlled system for a combustion control of diesel engines. A parallel feedforward compensator (PFC) design scheme which renders the resulting augmented controlled system ASPR will also be proposed in order to design a stable output feedback control system for the considered combustion model. The effectiveness of our proposed method will be confirmed through numerical simulations.

  19. Borsa de PFC de l'ETSEIB: un projecte col·laboratiu entre la Biblioteca i el seu centre

    OpenAIRE

    Alonso, Laia; Ceña Cosials, Margarita; Codina Vila, Miquel

    2008-01-01

    In order to obtain a degree, the final step for the student at the Industrial Engineering School of Barcelona (ETSEIB) of the Technical University of Catalonia (UPC) is the submission of his/her dissertation. Before implementing the “Stock Exchange of Dissertations” the process of PFC was generally quite regulated and systematized, and with a good support of interaction through a web site, except in the initial part of the process, when the students have to choose the subject and the director...

  20. Naval Surface Warfare Center Dahlgren Division: application of Lean Six Sigma in the pre-award procurement process

    OpenAIRE

    Himes, Kristy M.; Salisbury, Constance M.

    2008-01-01

    Joint Applied Project This Project outlines Lean Six Sigma principles, provides examples of Lean Six Sigma events, and analyzes principles that can be applied to Navy acquisition and contracting. The objective of this project is to: (1) provide an overview of Lean Six Sigma principles in contracting and acquisition; (2) identify Navy contracting processes that have and can be analyzed using Lean Six Sigma principles; (3) explore how Lean Six Sigma can be applied to interpret and implem...

  1. Ventral medial prefrontal cortex (vmPFC) as a target of the dorsolateral prefrontal modulation by transcranial direct current stimulation (tDCS) in drug addiction.

    Science.gov (United States)

    Nakamura-Palacios, Ester Miyuki; Lopes, Isabela Bittencourt Coutinho; Souza, Rodolpho Albuquerque; Klauss, Jaisa; Batista, Edson Kruger; Conti, Catarine Lima; Moscon, Janine Andrade; de Souza, Rodrigo Stênio Moll

    2016-10-01

    Here, we report some electrophysiologic and imaging effects of the transcranial direct current stimulation (tDCS) over the dorsolateral prefrontal cortex (dlPFC) in drug addiction, notably in alcohol and crack-cocaine dependence. The low resolution electromagnetic tomography (LORETA) analysis obtained through event-related potentials (ERPs) under drug-related cues, more specifically in its P3 segment (300-500 ms) in both, alcoholics and crack-cocaine users, showed that the ventral medial prefrontal cortex (vmPFC) was the brain area with the largest change towards increasing activation under drug-related cues in those subjects that kept abstinence during and after the treatment with bilateral tDCS (2 mA, 35 cm(2), cathodal left and anodal right) over dlPFC, applied repetitively (five daily sessions). In an additional study in crack-cocaine, which showed craving decreases after repetitive bilateral tDCS, we examined data originating from diffusion tensor imaging (DTI), and we found increased DTI parameters in the left connection between vmPFC and nucleus accumbens (NAcc), such as the number of voxels, fractional anisotropy (FA) and apparent diffusion coefficient (ADC), in tDCS-treated crack-cocaine users when compared to the sham-tDCS group. This increasing of DTI parameters was significantly correlated with craving decreasing after the repetitive tDCS. The vmPFC relates to the control of drug seeking, possibly by extinguishing this behavior. In our studies, the bilateral dlPFC tDCS reduced relapses and craving to the drug use, and increased the vmPFC activation under drug cues, which may be of a great importance in the control of drug use in drug addiction.

  2. From 6D superconformal field theories to dynamic gauged linear sigma models

    Science.gov (United States)

    Apruzzi, Fabio; Hassler, Falk; Heckman, Jonathan J.; Melnikov, Ilarion V.

    2017-09-01

    Compactifications of six-dimensional (6D) superconformal field theories (SCFTs) on four- manifolds generate a large class of novel two-dimensional (2D) quantum field theories. We consider in detail the case of the rank-one simple non-Higgsable cluster 6D SCFTs. On the tensor branch of these theories, the gauge group is simple and there are no matter fields. For compactifications on suitably chosen Kähler surfaces, we present evidence that this provides a method to realize 2D SCFTs with N =(0 ,2 ) supersymmetry. In particular, we find that reduction on the tensor branch of the 6D SCFT yields a description of the same 2D fixed point that is described in the UV by a gauged linear sigma model (GLSM) in which the parameters are promoted to dynamical fields, that is, a "dynamic GLSM" (DGLSM). Consistency of the model requires the DGLSM to be coupled to additional non-Lagrangian sectors obtained from reduction of the antichiral two-form of the 6D theory. These extra sectors include both chiral and antichiral currents, as well as spacetime filling noncritical strings of the 6D theory. For each candidate 2D SCFT, we also extract the left- and right-moving central charges in terms of data of the 6D SCFT and the compactification manifold.

  3. Kinetic properties and adrenergic control of TREK-2-like channels in rat medial prefrontal cortex (mPFC) pyramidal neurons.

    Science.gov (United States)

    Ładno, W; Gawlak, M; Szulczyk, P; Nurowska, E

    2017-06-15

    TREK-2-like channels were identified on the basis of electrophysiological and pharmacological tests performed on freshly isolated and enzymatically/mechanically dispersed pyramidal neurons of the rat medial prefrontal cortex (mPFC). Single-channel currents were recorded in cell-attached configuration and the impact of adrenergic receptors (α 1 , α 2 , β) stimulation on spontaneously appearing TREK-2-like channel activity was tested. The obtained results indicate that noradrenaline decreases the mean open probability of TREK-2-like channel currents by activation of β 1 but not of α 1 - and α 2 -adrenergic receptors. Mean open time and channel conductance were not affected. The system of intracellular signaling pathways depends on the activation of protein kinase A. We also show that adrenergic control of TREK-2-like channel currents by adrenergic receptors was similar in pyramidal neurons isolated from young, adolescent, and adult rats. Immunofluorescent confocal scans of mPFC slices confirmed the presence of the TREK-2 protein, which was abundant in layer V pyramidal neurons. The role of TREK-2-like channel control by adrenergic receptors is discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. A comparison of methods for monitoring low airborne concentrations of argon-41 and tritium, with MIT-PFC design applications

    International Nuclear Information System (INIS)

    McLoughlin, J.C.

    1990-08-01

    Two primary methods, GM- and NaI-detection, of airborne 41 Ar monitoring were compared experimentally to determine the lowest resolvable concentration given reasonable sample sizes. NaI-detectors provided a lower resolvable concentration than GM tubes, primarily due to energy resolution, which greatly reduced background noise. Airborne 3 H collection was compared for two primary collection and one ancillary method (direct condensation). All 3 H detection was performed via liquid scintillation. Tritium collection with water baths yielded higher collection efficiencies than dessicant traps for short sampling durations. As the length of the sampling duration increased, water traps yielded lower collection efficiencies than dessicant traps, primarily due to evaporation of water from the water traps. Direct condensation as a collection method of airborne 3 H was found unsuitable, since large amounts of gas were initially condensed, yet evaporated as the sample's coolant was removed. 41 Ar detection for the MIT-PFC was determined to be best provided by a low 40 K NaI crystal shielded with lead and steel. A Marinelli beaker was used as a monitoring volume to hold the effluent sample. 3 H monitoring at the MIT-PFC was fulfilled with dessicant traps to catalytically separate the [HTO] and [HT] fractions without the use of a carrier gas for the [HT

  5. A PFC3D-based numerical simulation of cutting load for lunar rock simulant and experimental validation

    Science.gov (United States)

    Li, Peng; Jiang, Shengyuan; Tang, Dewei; Xu, Bo

    2017-05-01

    For sake of striking a balance between the need of drilling efficiency and the constrains of power budget on the moon, the penetrations per revolution of drill bit are generally limited in the range around 0.1 mm, and besides the geometric angle of the cutting blade need to be well designed. This paper introduces a simulation approach based on PFC3D (particle flow code 3 dimensions) for analyzing the cutting load feature on lunar rock simulant, which is derived from different geometric-angle blades with a small cutting depth. The mean values of the cutting force of five blades in the survey region (four on the boundary points and one on the center point) are selected as the macroscopic responses of model. The method of experimental design which includes Plackett-Burman (PB) design and central composite design (CCD) method is adopted in the matching procedure of microparameters in PFC model. Using the optimization method of enumeration, the optimum set of microparameters is acquired. Then, the experimental validation is implemented by using other twenty-five blades with different geometric angles, and the results from both simulations and laboratory tests give fair agreements. Additionally, the rock breaking process cut by different blades are quantified from simulation analysis. This research provides the theoretical support for the refinement of the rock cutting load prediction and the geometric design of cutting blade on the drill bit.

  6. Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application

    Energy Technology Data Exchange (ETDEWEB)

    Khirwadkar, S.S., E-mail: sameer@ipr.res.in [Institute For Plasma Research, Bhat, Gandhinagar, Gujarat (India); Singh, K.P.; Patil, Y.; Khan, M.S.; Buch, J.J.U.; Patel, Alpesh; Tripathi, Sudhir [Institute For Plasma Research, Bhat, Gandhinagar, Gujarat (India); Jaman, P.M.; Rangaraj, L.; Divakar, C. [Materials Science Division, National Aerospace Laboratories, CSIR, Bangalore, Karnataka (India)

    2011-10-15

    The development of the fabrication technology of macro-brush configuration of tungsten (W) and carbon (graphite and CFC) plasma facing components (PFCs) for ITER like tokamak application is presented. The fabrication of qualified joint of PFC is a requirement for fusion tokamak. Vacuum brazing method has been employed for joining of W/CuCrZr and C/CuCrZr. Oxygen free high conductivity (OFHC) copper casting on W tiles was performed followed by machining, polishing and ultrasonic cleaning of the samples prior to vacuum brazing. The W/CuCrZr and graphite/CuCrZr based test mockups were vacuum brazed using silver free alloys. The mechanical shear and tensile strengths were evaluated for the W/CuCrZr and graphite/CuCrZr brazed joint samples. The micro-structural examination of the joints showed smooth interface. The details of fabrication and characterization procedure for macro-brush tungsten and carbon based PFC test mockups are presented.

  7. Some Practical Issues in the Application of Lean Six Sigma to Service Systems

    Directory of Open Access Journals (Sweden)

    Goh Thong-Ngee

    2014-11-01

    Full Text Available Six Sigma as a quality improvement framework has gained considerable popularity in the past two decades. Its extension Lean Six Sigma has also been embraced by many organizations for improvement of quality and business competitiveness. One important factor for the popularity of Six Sigma and Lean Six Sigma is their potential for improving service systems, in contrast to the conventional perceptions that only manufacturing systems can benefit from statistics-based methodologies. There are however a number of issues related to the nature of service systems that must be resolved before the full benefits of Lean Six Sigma can be realized. In this paper, these issues are discussed from a practical point of view from three angles: analytical, organizational, and personal. Awareness of the existence of such issues, if not the answers to all of them, is a pre-requisite to effective adoption of Lean Six Sigma tools.

  8. Seis Sigma: Fatores Críticos de Sucesso para sua Implantação

    Directory of Open Access Journals (Sweden)

    Antonio Cesar Amaru Maximiano

    2009-10-01

    Full Text Available This article describes an investigation of critical success factors to implement Six Sigma in organizations operating in the Brazilian market place. Besides that, a secondary objective was to investigate the relationship between aspects like success perception among those companies which implemented Six Sigma, company size, company nationality, time of Six Sigma of implementation, continuous training, communication level between professionals, full-time and part-time Black Belts, project completion, project duration and project savings. Data were collected through an Internet questionnaire, distributed by email and sent to discussion groups involving Six Sigma professionals. Questionnaire development included a literature review and interviews with experienced Six Sigma professionals. The results indicated eight critical success factors for Six Sigma implementation: (a Leadership, (b Projects, (c Training, (d Communication and Review, (e Managerial Process, (f Black Belts Profile, (g Project Teams and (h Previous Quality Initiatives.

  9. Transcranial Direct Current Stimulation over the Medial Prefrontal Cortex and Left Primary Motor Cortex (mPFC-lPMC) Affects Subjective Beauty but Not Ugliness

    Science.gov (United States)

    Nakamura, Koyo; Kawabata, Hideaki

    2015-01-01

    Neuroaesthetics has been searching for the neural bases of the subjective experience of beauty. It has been demonstrated that neural activities in the medial prefrontal cortex (mPFC) and the left primary motor cortex (lPMC) correlate with the subjective experience of beauty. Although beauty and ugliness seem to be semantically and conceptually opposite, it is still unknown whether these two evaluations represent extreme opposites in unitary or bivariate dimensions. In this study, we applied transcranial direct current stimulation (tDCS) to examine whether non-invasive brain stimulation modulates two types of esthetic evaluation; evaluating beauty and ugliness. Participants rated the subjective beauty and ugliness of abstract paintings before and after the application of tDCS. Application of cathodal tDCS over the mPFC with anode electrode over the lPMC, which induced temporal inhibition of neural excitability of the mPFC, led to a decrease in beauty ratings but not ugliness ratings. There were no changes in ratings of both beauty and ugliness when applying anodal tDCS or sham stimulation over the mPFC. Results from our experiment indicate that the mPFC and the lPMC have a causal role in generating the subjective experience of beauty, with beauty and ugliness evaluations constituting two distinct dimensions. PMID:26696865

  10. Improving ED specimen TAT using Lean Six Sigma.

    Science.gov (United States)

    Sanders, Janet H; Karr, Tedd

    2015-01-01

    Lean and Six Sigma are continuous improvement methodologies that have garnered international fame for improving manufacturing and service processes. Increasingly these methodologies are demonstrating their power to also improve healthcare processes. The purpose of this paper is to discuss a case study for the application of Lean and Six Sigma tools in the reduction of turnaround time (TAT) for Emergency Department (ED) specimens. This application of the scientific methodologies uncovered opportunities to improve the entire ED to lab system for the specimens. This case study provides details on the completion of a Lean Six Sigma project in a 1,000 bed tertiary care teaching hospital. Six Sigma's Define, Measure, Analyze, Improve, and Control methodology is very similar to good medical practice: first, relevant information is obtained and assembled; second, a careful and thorough diagnosis is completed; third, a treatment is proposed and implemented; and fourth, checks are made to determine if the treatment was effective. Lean's primary goal is to do more with less work and waste. The Lean methodology was used to identify and eliminate waste through rapid implementation of change. The initial focus of this project was the reduction of turn-around-times for ED specimens. However, the results led to better processes for both the internal and external customers of this and other processes. The project results included: a 50 percent decrease in vials used for testing, a 50 percent decrease in unused or extra specimens, a 90 percent decrease in ED specimens without orders, a 30 percent decrease in complete blood count analysis (CBCA) Median TAT, a 50 percent decrease in CBCA TAT Variation, a 10 percent decrease in Troponin TAT Variation, a 18.2 percent decrease in URPN TAT Variation, and a 2-5 minute decrease in ED registered nurses rainbow draw time. This case study demonstrated how the quantitative power of Six Sigma and the speed of Lean worked in harmony to improve

  11. Improvement of Production Quality by using Six Sigma Technique:

    Directory of Open Access Journals (Sweden)

    Sawsan Ali

    2013-04-01

    Full Text Available As a result of lack of conformity of the outer diameter of the filling piston of plastic syringe to the specifications set out in the design map and the increased demand for its  products from the Medical syringes factory – Babylon. The research conducts the necessary investigations and  analysis of the production process as most of the units rejected by fact that the outer diameter of the filling piston is smaller than the minimum specification and units returned to work  due to the fact that  the outer diameter larger than the upper limit of the specification.13The research aims firstly to examine the outer diameter of the filling piston through the use of the control chart of the variables represented by the average , and its impact on the production process capability because the increase in diameter specification leads to an increase in the pressure imposed on the lining of the cylinder, causing difficulty in piston movement and a decrease in diameter specification which leads to loose the process capability to prevent leakage of fluid, causing air to enter as well as to speed the movement of the piston, which negatively affects human life in both cases. Secondly, study the possibility of improving the production process capability by using advanced levels of the sigma.The results showed that the production process in the case of a disciplined and follows a normal distribution, the pointer of  the production process capability is equal to (0.55 and the factory works within the level of Sigma equal to (1.65. The proportion of a damaged product is (15.8 % and rework (0.99 %.In order to  reduce the proportion of damaged product, this paper introduces a quality plan depending on ( ±0.025 as tolerance limits instead of ( ±0.05 to increase sigma level by 202%.

  12. Sigma models in (4,4) harmonic superspace

    International Nuclear Information System (INIS)

    Ivanov, E.; Joint Inst. for Nuclear Research, Dubna; Sutulin, A.

    1994-04-01

    We define basics of (4,4) 2D harmonic superspace with two independent sets of SU(2) harmonic variables and apply it to construct new superfield actions of (4,4) supersymmetric two-dimensional sigma models with torsion and mutually commuting left and right complex structures, as well as of their massive deformations. We show that the generic off-shell sigma model action is the general action of constrained analytic superfields q (1,1) representing twisted N=4 multiplets in (4,4) harmonic superspace. The massive term of q (1,1) is shown to be unique; it generates a scalar potential the form of which is determined by the metric on the target bosonic manifold. We discuss in detail (4,4) supersymmetric group manifold SU(2)xU(1) WZNW sigma model and its Liouville deformation. A deep analogy of the relevant superconformally invariant analytic superfield action to that of the improved tensor N=2 4D multiplet is found. We define (4,4) duality transformation and find new off-shell dual representations of the previously constructed actions via unconstrained analytic (4,4) superfields. The main peculiarities of the (4,4) duality transformation are: (i) It preserves manifest (4,4) supersymmetry; (ii) dual actions reveal a gauge invariance needed for the onshell equivalence to the original description; (iii) in the actions dual to the massive ones 2D supersymmetry is modified off shell by SU(2) tensor central charges. The dual representation suggests some hints of how to describe (4,4) models with non-commuting complex structures in the harmonic superspace. (orig.)

  13. [Improving inpatient pharmacoterapeutic process by Lean Six Sigma methodology].

    Science.gov (United States)

    Font Noguera, I; Fernández Megía, M J; Ferrer Riquelme, A J; Balasch I Parisi, S; Edo Solsona, M D; Poveda Andres, J L

    2013-01-01

    Lean Six Sigma methodology has been used to improve care processes, eliminate waste, reduce costs, and increase patient satisfaction. To analyse the results obtained with Lean Six Sigma methodology in the diagnosis and improvement of the inpatient pharmacotherapy process during structural and organisational changes in a tertiary hospital. 1.000 beds tertiary hospital. prospective observational study. The define, measure, analyse, improve and control (DMAIC), were deployed from March to September 2011. An Initial Project Charter was updated as results were obtained. 131 patients with treatments prescribed within 24h after admission and with 4 drugs. safety indicators (medication errors), and efficiency indicators (complaints and time delays). Proportion of patients with a medication error was reduced from 61.0% (25/41 patients) to 55.7% (39/70 patients) in four months. Percentage of errors (regarding the opportunities for error) decreased in the different phases of the process: Prescription: from 5.1% (19/372 opportunities) to 3.3% (19/572 opportunities); Preparation: from 2.7% (14/525 opportunities) to 1.3% (11/847 opportunities); and administration: from 4.9% (16/329 opportunities) to 3.0% (13/433 opportunities). Nursing complaints decreased from 10.0% (2119/21038 patients) to 5.7% (1779/31097 patients). The estimated economic impact was 76,800 euros saved. An improvement in the pharmacotherapeutic process and a positive economic impact was observed, as well as enhancing patient safety and efficiency of the organization. Standardisation and professional training are future Lean Six Sigma candidate projects. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

  14. Improving patient satisfaction with pain management using Six Sigma tools.

    Science.gov (United States)

    DuPree, Erin; Martin, Lisa; Anderson, Rebecca; Kathuria, Navneet; Reich, David; Porter, Carol; Chassin, Mark R

    2009-07-01

    Patient satisfaction as a direct and public measure of quality of care is changing the way hospitals address quality improvement. The feasibility of using the Six Sigma DMAIC (Define, Measure, Analyze, Improve, Control) methodology to improve patient satisfaction as it relates to pain management was evaluated. This project used the DMAIC methodology to improve patients' overall satisfaction with pain management on two inpatient units in an urban academic medical center. Pre- and postintervention patient surveys were conducted. The DMAIC methodology provided a data-driven structure to determine the optimal improvement strategies, as well as a long-term plan for maintaining any improvements. In addition, the Change Acceleration Process (CAP) was used throughout the project's various DMAIC stages to further the work of the team by creating a shared need to meet the objectives of the project. Overall satisfaction with pain management "excellent" ratings increased from 37% to 54%. Both units surpassed the goal of at least 50% of responses in the "excellent" category. Several key drivers of satisfaction with pain management were uncovered in the Analyze phase of the project, and each saw rating increases from the pre-intervention to postintervention surveys. Ongoing monitoring by the hospital inpatient satisfaction survey showed that the pain satisfaction score improved in subsequent quarters as compared with the pre-intervention period. The Six Sigma DMAIC methodology can be used successfully to improve patient satisfaction. The project led to measurable improvements in patient satisfaction with pain management, which have endured past the duration of the Six Sigma project. The Control phase of DMAIC allows the improvements to be incorporated into daily operations.

  15. Fixed points of quantum operations

    International Nuclear Information System (INIS)

    Arias, A.; Gheondea, A.; Gudder, S.

    2002-01-01

    Quantum operations frequently occur in quantum measurement theory, quantum probability, quantum computation, and quantum information theory. If an operator A is invariant under a quantum operation φ, we call A a φ-fixed point. Physically, the φ-fixed points are the operators that are not disturbed by the action of φ. Our main purpose is to answer the following question. If A is a φ-fixed point, is A compatible with the operation elements of φ? We shall show in general that the answer is no and we shall give some sufficient conditions under which the answer is yes. Our results will follow from some general theorems concerning completely positive maps and injectivity of operator systems and von Neumann algebras

  16. Adoção do Six Sigma pelas 500 Maiores Empresas em Portugal

    OpenAIRE

    Conceição, A.; Major, M.

    2011-01-01

    The Six Sigma had its genesis in big industrial companies that have implemented it as a tool for reducing defects. The initial success encouraged its application in other areas and we see today successful implementation in other sectors such as services, and within their own organizations in other areas beyond production, setting; this has contributed to Six Sigma being recognized as a new management model. In order to determine the extent to which Six Sigma is present in Portuguese companies...

  17. Use of the Six Sigma by the 500 Largent Companies in Portugal

    OpenAIRE

    Mendes da Conceição, Ana Cristina; Martins Ferreira Major, Maria João

    2011-01-01

    The Six Sigma had its genesis in big industrial companies that have implemented it as a tool for reducing defects. The initial success encouraged its application in other areas and we see today successful implementation in other sectors such as services, and within their own organizations in other areas beyond production, setting; this has contributed to Six Sigma being recognized as a new management model. In order to determine the extent to which Six Sigma is present in Portuguese companies...

  18. Sterile neutrinos: the necessity for a 5 sigma definitive clarification

    CERN Document Server

    Rubbia, Carlo; Pietropaolo, Francesco; Sala, Paola

    2013-01-01

    Several different experiments have hinted to the existence of "anomalies" in the neutrino sector, implying the possible presence of additional sterile neutrinos or of other options. A definitive experimental search, capable to clarify either in favour or against all these anomalies at the appropriate > 5 sigma level has been proposed by the ICARUS-NESSIE Collaboration. The technique is based on two innovative concepts, namely (1) a large mass Liquid Argon Time Projection Chamber (LAr-TPC) now in full operation at LNGS and (2) the search for spectral differences in two identical detectors at different distances along the (anti-)neutrino line(s).

  19. Marginal deformations of heterotic G 2 sigma models

    Science.gov (United States)

    Fiset, Marc-Antoine; Quigley, Callum; Svanes, Eirik Eik

    2018-02-01

    Recently, the infinitesimal moduli space of heterotic G 2 compactifications was described in supergravity and related to the cohomology of a target space differential. In this paper we identify the marginal deformations of the corresponding heterotic nonlinear sigma model with cohomology classes of a worldsheet BRST operator. This BRST operator is nilpotent if and only if the target space geometry satisfies the heterotic supersymmetry conditions. We relate this to the supergravity approach by showing that the corresponding cohomologies are indeed isomorphic. We work at tree-level in α' perturbation theory and study general geometries, in particular with non-vanishing torsion.

  20. Non-linear sigma model on the fuzzy supersphere

    International Nuclear Information System (INIS)

    Kurkcuoglu, Seckin

    2004-01-01

    In this note we develop fuzzy versions of the supersymmetric non-linear sigma model on the supersphere S (2,2) . In hep-th/0212133 Bott projectors have been used to obtain the fuzzy C P 1 model. Our approach utilizes the use of supersymmetric extensions of these projectors. Here we obtain these (super)-projectors and quantize them in a fashion similar to the one given in hep-th/0212133. We discuss the interpretation of the resulting model as a finite dimensional matrix model. (author)

  1. A calculation of the physical mass of sigma meson

    International Nuclear Information System (INIS)

    Morones-Ibarra, J.R.; Santos-Guevara, Ayax

    2007-01-01

    We calculate the physical mass and the width of the sigma meson by considering that it couples in vacuum to two virtual pions. The mass is calculated by using the spectral function, and we find that it is about 600 MeV. In addition, we obtained 220 MeV as the value for the width of its spectral function. The value obtained for the mass is in good agreement with that reported in the Particle Data Book for the σ meson, which is also named f 0 (600). This result also shows that σ-meson can be considered as a two-pion resonance. (author)

  2. Applying Lean Six Sigma to improve medication management.

    Science.gov (United States)

    Nayar, Preethy; Ojha, Diptee; Fetrick, Ann; Nguyen, Anh T

    2016-01-01

    A significant proportion of veterans use dual care or health care services within and outside the Veterans Health Administration (VHA). In this study conducted at a VHA medical center in the USA, the authors used Lean Six Sigma principles to develop recommendations to eliminate wasteful processes and implement a more efficient and effective process to manage medications for dual care veteran patients. The purpose of this study is to: assess compliance with the VHA's dual care policy; collect data and describe the current process for co-management of dual care veterans' medications; and draft recommendations to improve the current process for dual care medications co-management. Input was obtained from the VHA patient care team members to draw a process map to describe the current process for filling a non-VHA prescription at a VHA facility. Data were collected through surveys and direct observation to measure the current process and to develop recommendations to redesign and improve the process. A key bottleneck in the process that was identified was the receipt of the non-VHA medical record which resulted in delays in filling prescriptions. The recommendations of this project focus on the four domains of: documentation of dual care; veteran education; process redesign; and outreach to community providers. This case study describes the application of Lean Six Sigma principles in one urban Veterans Affairs Medical Center (VAMC) in the Mid-Western USA to solve a specific organizational quality problem. Therefore, the findings may not be generalizable to other organizations. The Lean Six Sigma general principles applied in this project to develop recommendations to improve medication management for dual care veterans are applicable to any process improvement or redesign project and has valuable lessons for other VAMCs seeking to improve care for their dual care veteran patients. The findings of this project will be of value to VA providers and policy makers and health

  3. SIGMA, a new language for interactive array-oriented computing

    International Nuclear Information System (INIS)

    Hagedorn, R.; Reinfelds, J.; Vandoni, C.; Hove, L. van.

    1978-01-01

    A description is given of the principles and the main facilities of SIGMA (System for Interactive Graphical Mathematical Applications), a programming language for scientific computing whose major characteristics are: automatic handling of multi-dimensional rectangular arrays as basic data units, interactive operation of the system, and graphical display facilities. After introducing the basic concepts and features of the language, it describes in some detail the methods and operators for the automatic handling of arrays and for their graphical display, the procedures for construction of programs by users, and other facilities of the system. The report is a new version of CERN 73-5. (Auth.)

  4. Twisted sigma-model solitons on the quantum projective line

    Science.gov (United States)

    Landi, Giovanni

    2018-04-01

    On the configuration space of projections in a noncommutative algebra, and for an automorphism of the algebra, we use a twisted Hochschild cocycle for an action functional and a twisted cyclic cocycle for a topological term. The latter is Hochschild-cohomologous to the former and positivity in twisted Hochschild cohomology results into a lower bound for the action functional. While the equations for the critical points are rather involved, the use of the positivity and the bound by the topological term lead to self-duality equations (thus yielding twisted noncommutative sigma-model solitons, or instantons). We present explicit nontrivial solutions on the quantum projective line.

  5. Gamma ray spectrum analysis code: sigmas 1.0

    International Nuclear Information System (INIS)

    Siangsanan, P.; Dharmavanij, W.; Chongkum, S.

    1996-01-01

    We have developed Sigmas 1.0 a software package for data reduction and gamma ray spectra evaluation. It is capable of analysing the gamma-ray spectrum in the range of 0-3 MeV by semiconductor detector, i.e. Ge(Li) or HPGe, peak searching, net area determining, plotting and spectrum displaying. There are two methods for calculating the net area under peaks; the Covell method and non-linear fitting by the method of Levenberg and Marquardt which can fit any multiplet peak in the spectrum. The graphic display was rather fast and user friendly

  6. On the chiral phase transition in the linear sigma model

    International Nuclear Information System (INIS)

    Tran Huu Phat; Nguyen Tuan Anh; Le Viet Hoa

    2003-01-01

    The Cornwall- Jackiw-Tomboulis (CJT) effective action for composite operators at finite temperature is used to investigate the chiral phase transition within the framework of the linear sigma model as the low-energy effective model of quantum chromodynamics (QCD). A new renormalization prescription for the CJT effective action in the Hartree-Fock (HF) approximation is proposed. A numerical study, which incorporates both thermal and quantum effect, shows that in this approximation the phase transition is of first order. However, taking into account the higher-loop diagrams contribution the order of phase transition is unchanged. (author)

  7. Massive (p,q)-supersymmetric sigma models revisited

    International Nuclear Information System (INIS)

    Papadopoulos, G.

    1994-06-01

    We recently obtained the conditions on the couplings of the general two-dimensional massive sigma-model required by (p,q)-supersymmetry. Here wer compute the Poisson bracket algebra of the supersymmetry and central Noether charges, and show that the action is invariant under the automorphism group of this algebra. Surprisingly, for the (4,4) case the automorphism group is always a subgroup of SO(3), rather than SO(4). We also re-analyse the conditions for (2,2) and 4,4) supersymmetry of the zero torsion models without assumptions about the central charge matrix. (orig.)

  8. The sigma-1 receptor: roles in neuronal plasticity and disease

    OpenAIRE

    Kourrich, Saïd; Su, Tsung-Ping; Fujimoto, Michiko; Bonci, Antonello

    2012-01-01

    Sigma-1 receptors (Sig-1Rs) have been implicated in many neurological and psychiatric conditions. The Sig-1R is an intracellular chaperone that resides specifically at the endoplasmic reticulum (ER)-mitochondrion interface referred to as the mitochondrion-associated ER membrane (MAM). Here, Sig-1Rs regulate ER-mitochondrion Ca2+ signaling. In this review, we discuss the current understanding of Sig-1R functions. Based on this, we suggest that the key cellular mechanism linking Sig-1Rs to neur...

  9. H II regions ionized by sigma and tau Sco

    Energy Technology Data Exchange (ETDEWEB)

    Gaylard, M J [Council for Scientific and Industrial Research, Pretoria (South Africa). National Inst. for Telecommunications Research

    1984-11-15

    The H142..cap alpha.. line has been detected in Sharpless 9, which is ionized by sigmaSco, and in RCW 129, ionized by tau Sco. The electron temperatures in the two H II regions are 5700 +- 340 K and 4200 +- 600 K respectively. The thermal radio emission from S9 is asymmetric with respect to the stellar position, and the emission peak coincides with the position of the optical red emission features to the north and west of the star. There is no evidence for collisional excitation. S9 is a density-bounded H II region in the champagne phase, the bright rims and radio peak marking the ionization front.

  10. Fixed-point signal processing

    CERN Document Server

    Padgett, Wayne T

    2009-01-01

    This book is intended to fill the gap between the ""ideal precision"" digital signal processing (DSP) that is widely taught, and the limited precision implementation skills that are commonly required in fixed-point processors and field programmable gate arrays (FPGAs). These skills are often neglected at the university level, particularly for undergraduates. We have attempted to create a resource both for a DSP elective course and for the practicing engineer with a need to understand fixed-point implementation. Although we assume a background in DSP, Chapter 2 contains a review of basic theory

  11. Apparatus for fixing radioactive waste

    International Nuclear Information System (INIS)

    Murphy, J.D.; Pirro, J. Jr.; Lawrence, M.; Wisla, S.F.

    1975-01-01

    Fixing radioactive waste is disclosed in which the waste is collected as a slurry in aqueous media in a metering tank located within the nuclear facilities. Collection of waste is continued from time to time until a sufficient quantity of material to make up a full shipment to a burial ground has been collected. The slurry is then cast in shipping containers for shipment to a burial ground or the like by metering through a mixer into which fixing materials are simultaneously metered at a rate to yield the desired proportions of materials. (U.S.)

  12. An exploratory analysis for Lean and Six Sigma implementation in hospitals: Together is better?

    Science.gov (United States)

    Lee, Jung Young; McFadden, Kathleen L; Gowen, Charles R

    2016-12-22

    Despite the increasing interest for Lean and Six Sigma implementations in hospitals, there has been little empirical evidence that goes beyond descriptive case studies to address the current status and the effectiveness of the implementations. The aim of this study was to explore existing patterns of Lean and Six Sigma implementation in U.S. hospitals and compare the performance of the different patterns. We collected data from 215 U.S. hospitals via a survey that includes measurement items developed from related literature. Using the cross-sectional data, we conducted a cluster analysis, followed by t tests, chi-square tests, and regression analyses for cluster verification. The cluster analysis identifies two clusters, a Moderate Six Sigma group and a Lean Six Sigma group. Results show that the Lean Six Sigma group outperforms the Moderate Six Sigma group across many performance dimensions: responsiveness capability, patient safety, and possibly cost saving. In addition, the Lean Six Sigma group tends to be composed of larger, private teaching hospitals located in more urban areas, and they employ more resources for quality improvement. Our research contributes to the quality management literature by supporting the possible complementary relationship between Lean and Six Sigma in hospitals. Our study encourages practitioners and managers to pay more attention to Lean implementation. Although Lean seems to be conducted in a limited fashion in many hospitals, it should be expanded and combined with Six Sigma for better results.

  13. THE QUALITY IMPROVEMENT OF PRIMER PACKAGING PROCESS USING SIX SIGMA METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Prima Ditahardiyani

    2008-01-01

    Full Text Available The implementation of Six Sigma has become a common theme in many organizations. This paper presents the Six Sigma methodology and its implementation in a primer packaging process of Cranberry drink. DMAIC (Define, Measure, Analyze, Improve and Control approach is used to analyze and to improve the primer packaging process, which have high variability and defects output. After the improvement, the results showed that there was an increasing sigma level. However, it is not significantly and has not achieved the world standard quality, yet. Therefore, the implementation of Six Sigma in primer packaging process of Cranberry drink still has a room for doing a further research.

  14. Six Sigma Quality Management System and Design of Risk-based Statistical Quality Control.

    Science.gov (United States)

    Westgard, James O; Westgard, Sten A

    2017-03-01

    Six sigma concepts provide a quality management system (QMS) with many useful tools for managing quality in medical laboratories. This Six Sigma QMS is driven by the quality required for the intended use of a test. The most useful form for this quality requirement is the allowable total error. Calculation of a sigma-metric provides the best predictor of risk for an analytical examination process, as well as a design parameter for selecting the statistical quality control (SQC) procedure necessary to detect medically important errors. Simple point estimates of sigma at medical decision concentrations are sufficient for laboratory applications. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Under the knife: a national survey of six sigma programs in US healthcare organizations.

    Science.gov (United States)

    Feng, Qianmei; Manuel, Chris M

    2008-01-01

    Medical and policy literature reports many six sigma applications at specific healthcare organizations. However, there is a lack of studies that investigate the broader status of six sigma in US healthcare systems. The purpose of this paper is to present the results from a national survey of six sigma programs in US healthcare organizations. Through the design, distribution, and analysis of a nationwide survey, this paper assesses the implementation of six sigma in healthcare facilities. Two sets of surveys were designed based on whether an organization has adopted six sigma or not. Findings from this paper indicate the common six sigma projects implemented in healthcare organizations, typical implementation durations, cost benefits, and major barriers in implementation, and so on. This paper is limited by the low-response rate owing to time and budget constraints. Through the dissemination of this paper, it is hoped that more organizations will become interested in this subject and participate in future studies. This work is the first study to investigate the implementation status of six sigma in US healthcare systems. It will share experiences amongst six sigma institutions and promote its application in many institutions. The findings will provide instructive information to six sigma practitioners and researchers, and particularly to health care management.

  16. Quality assurance and management in microelectronics companies: ISO 9000 versus Six Sigma

    Science.gov (United States)

    Lupan, Razvan; Kobi, Abdessamad; Robledo, Christian; Bacivarov, Ioan; Bacivarov, Angelica

    2009-01-01

    A strategy for the implementation of the Six Sigma method as an improvement solution for the ISO 9000:2000 Quality Standard is proposed. Our approach is focused on integrating the DMAIC cycle of the Six Sigma method with the PDCA process approach, highly recommended by the standard ISO 9000:2000. The Six Sigma steps applied to each part of the PDCA cycle are presented in detail, giving some tools and training examples. Based on this analysis the authors conclude that applying Six Sigma philosophy to the Quality Standard implementation process is the best way to achieve the optimal results in quality progress and therefore in customers satisfaction.

  17. Small-Molecule Sigma1 Modulator Induces Autophagic Degradation of PD-L1.

    Science.gov (United States)

    Maher, Christina M; Thomas, Jeffrey D; Haas, Derick A; Longen, Charles G; Oyer, Halley M; Tong, Jane Y; Kim, Felix J

    2018-02-01

    Emerging evidence suggests that Sigma1 ( SIGMAR1 , also known as sigma-1 receptor) is a unique ligand-regulated integral membrane scaffolding protein that contributes to cellular protein and lipid homeostasis. Previously, we demonstrated that some small-molecule modulators of Sigma1 alter endoplasmic reticulum (ER)-associated protein homeostasis pathways in cancer cells, including the unfolded protein response and autophagy. Programmed death-ligand 1 (PD-L1) is a type I integral membrane glycoprotein that is cotranslationally inserted into the ER and is processed and transported through the secretory pathway. Once at the surface of cancer cells, PD-L1 acts as a T-cell inhibitory checkpoint molecule and suppresses antitumor immunity. Here, we demonstrate that in Sigma1-expressing triple-negative breast and androgen-independent prostate cancer cells, PD-L1 protein levels were suppressed by RNAi knockdown of Sigma1 and by small-molecule inhibition of Sigma1. Sigma1-mediated action was confirmed by pharmacologic competition between Sigma1-selective inhibitor and activator ligands. When administered alone, the Sigma1 inhibitor decreased cell surface PD-L1 expression and suppressed functional interaction of PD-1 and PD-L1 in a coculture of T cells and cancer cells. Conversely, the Sigma1 activator increased PD-L1 cell surface expression, demonstrating the ability to positively and negatively modulate Sigma1 associated PD-L1 processing. We discovered that the Sigma1 inhibitor induced degradation of PD-L1 via autophagy, by a mechanism distinct from bulk macroautophagy or general ER stress-associated autophagy. Finally, the Sigma1 inhibitor suppressed IFNγ-induced PD-L1. Our data demonstrate that small-molecule Sigma1 modulators can be used to regulate PD-L1 in cancer cells and trigger its degradation by selective autophagy. Implications: Sigma1 modulators sequester and eliminate PD-L1 by autophagy, thus preventing functional PD-L1 expression at the cell surface. This

  18. Six sigma implementation and its effects on configuration management related to metal industry

    International Nuclear Information System (INIS)

    Tariq, M.M.; Ahmad, S.F.; Mahmoo, A.; Kalsoom, T.

    2006-01-01

    This paper discusses the implementation of Six Sigma and its effects on Configuration Management (CM) of metal industry. The basic idea behind the Six Sigma philosophy is to continuously reduce product and process variation. Design for Six Sigma (DFSS) methodology generates new processes, products, services, plants, etc., whereas Define, Measure, Analyze, Improve and Control (DMAIC) methodology improves existing processes, products, services, designs, plants, etc. The DFSS project stages are summarized as Identify, Design, Optimize, and Validate (IDOV). Role of CM for DFSS and DMAIC will be discussed. Seven steps for Six Sigma introduction in new management strategy and the other seven steps for Six Sigma improvement implementation shall be discussed indicating possible role of CM. Tasks of Black Belt leader in Six Sigma implementation are very important. The expected outcomes of Six Sigma efforts are: Faster and more robust product development. More efficient and capable manufacturing processes and, more confident overall business performance. The investigation and knowledge of Six Sigma effects produced in metals industry on CM will increase the effectiveness of each other, and it will be a better, reliable and well documented approach towards Six Sigma. (author)

  19. Application of six sigma DMAIC methodology to reduce service resolution time in a service organization

    Directory of Open Access Journals (Sweden)

    Virender Narula

    2017-11-01

    Full Text Available The popularity of Six Sigma, as a means for improving quality, has grown exponentially in recent years. It is a proven methodology to achieve breakthrough improvement in process performance that generates significant savings to bottom line of an organization. This paper illustrates how Six Sigma methodology may be used to improve service processes. The purpose of this paper is to develop Six Sigma DMAIC methodologies that would help service organizations look into their processes. In addition, it demonstrates the vital linkages between process improvement and process variation. The study identifies critical process parameters and suggests a team structure for Six Sigma project in service operations.

  20. Flat Coalgebraic Fixed Point Logics

    Science.gov (United States)

    Schröder, Lutz; Venema, Yde

    Fixed point logics are widely used in computer science, in particular in artificial intelligence and concurrency. The most expressive logics of this type are the μ-calculus and its relatives. However, popular fixed point logics tend to trade expressivity for simplicity and readability, and in fact often live within the single variable fragment of the μ-calculus. The family of such flat fixed point logics includes, e.g., CTL, the *-nesting-free fragment of PDL, and the logic of common knowledge. Here, we extend this notion to the generic semantic framework of coalgebraic logic, thus covering a wide range of logics beyond the standard μ-calculus including, e.g., flat fragments of the graded μ-calculus and the alternating-time μ-calculus (such as ATL), as well as probabilistic and monotone fixed point logics. Our main results are completeness of the Kozen-Park axiomatization and a timed-out tableaux method that matches ExpTime upper bounds inherited from the coalgebraic μ-calculus but avoids using automata.

  1. Enumerating matroids of fixed rank

    NARCIS (Netherlands)

    Pendavingh, R.; van der Pol, J.

    2017-01-01

    It has been conjectured that asymptotically almost all matroids are sparse paving, i.e. that~s(n)∼m(n)s(n)∼m(n), where m(n)m(n) denotes the number of matroids on a fixed groundset of size nn, and s(n)s(n) the number of sparse paving matroids. In an earlier paper, we showed that

  2. Fixed Costs and Hours Constraints

    Science.gov (United States)

    Johnson, William R.

    2011-01-01

    Hours constraints are typically identified by worker responses to questions asking whether they would prefer a job with more hours and more pay or fewer hours and less pay. Because jobs with different hours but the same rate of pay may be infeasible when there are fixed costs of employment or mandatory overtime premia, the constraint in those…

  3. Alteration of synaptic transmission in the hippocampal-mPFC pathway during extinction trials of context-dependent fear memory in juvenile rat stress models.

    Science.gov (United States)

    Koseki, Hiroyo; Matsumoto, Machiko; Togashi, Hiroko; Miura, Yoshihide; Fukushima, Kazuaki; Yoshioka, Mitsuhiro

    2009-09-01

    The medial prefrontal cortex (mPFC) has been proposed to be essential for extinction of fear memory, but its neural mechanism has been poorly understood. The present study examined whether synaptic transmission in the hippocampal-mPFC pathway is related to extinction of context-dependent fear memory in freely moving rats using electrophysiological approaches combined with behavioral analysis. Population spike amplitude in the mPFC was decreased during the first extinction trial by exposure to contextual fear conditioning. This synaptic inhibition was reversed by repeated extinction trials, accompanied by decreases in fear-related freezing behavior. These results suggest that alteration of synaptic transmission in the hippocampal-mPFC pathway is associated with the extinction processes of context-dependent fear memory. Further experiments were performed to elucidate whether early postnatal stress alters the synaptic response in the mPFC during extinction trials using a juvenile stress model, based on our previous findings that early postnatal stress affects the behavioral response to emotional stress. Adult rats that previously were exposed to five footshocks (FS) (shock intensity, 0.5 mA; intershock interval, 28 seconds; shock duration, 2 seconds) at postnatal day 21 to 25 (week 3; 3W-FS) exhibited impaired reversal of both inhibitory synaptic transmission and freezing behavior induced by repeated extinction trials. The neuronal and behavioral deficits observed in the 3W-FS group were prevented by pretreatment with the serotonin(1A) receptor agonist tandospirone (1 mg/kg, i.p.). These results indicate the possiblity that aversive stress exposure during the third postnatal week impaired extinction processes of context-dependent fear memory. The deficits in extinction observed in the 3W-FS group might be attributable to dysfunction of hippocampal-mPFC neural circuits involving 5-HT(1A) receptor mechanisms. 2009 Wiley-Liss, Inc.

  4. Adhesives for fixed orthodontic bands.

    Science.gov (United States)

    Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

    2016-10-25

    Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

  5. Development of Six Sigma methodology for CNC milling process improvements

    Science.gov (United States)

    Ismail, M. N.; Rose, A. N. M.; Mohammed, N. Z.; Rashid, M. F. F. Ab

    2017-10-01

    Quality and productivity have been identified as an important role in any organization, especially for manufacturing sectors to gain more profit that leads to success of a company. This paper reports a work improvement project in Kolej Kemahiran Tinggi MARA Kuantan. It involves problem identification in production of “Khufi” product and proposing an effective framework to improve the current situation effectively. Based on the observation and data collection on the work in progress (WIP) product, the major problem has been identified related to function of the product which is the parts can’t assemble properly due to dimension of the product is out of specification. The six sigma has been used as a methodology to study and improve of the problems identified. Six Sigma is a highly statistical and data driven approach to solving complex business problems. It uses a methodical five phase approach define, measure, analysis, improve and control (DMAIC) to help understand the process and the variables that affect it so that can be optimized the processes. Finally, the root cause and solution for the production of “Khufi” problem has been identified and implemented then the result for this product was successfully followed the specification of fitting.

  6. Global Gauge Anomalies in Two-Dimensional Bosonic Sigma Models

    Science.gov (United States)

    Gawȩdzki, Krzysztof; Suszek, Rafał R.; Waldorf, Konrad

    2011-03-01

    We revisit the gauging of rigid symmetries in two-dimensional bosonic sigma models with a Wess-Zumino term in the action. Such a term is related to a background closed 3-form H on the target space. More exactly, the sigma-model Feynman amplitudes of classical fields are associated to a bundle gerbe with connection of curvature H over the target space. Under conditions that were unraveled more than twenty years ago, the classical amplitudes may be coupled to the topologically trivial gauge fields of the symmetry group in a way which assures infinitesimal gauge invariance. We show that the resulting gauged Wess-Zumino amplitudes may, nevertheless, exhibit global gauge anomalies that we fully classify. The general results are illustrated on the example of the WZW and the coset models of conformal field theory. The latter are shown to be inconsistent in the presence of global anomalies. We introduce a notion of equivariant gerbes that allow an anomaly-free coupling of the Wess-Zumino amplitudes to all gauge fields, including the ones in non-trivial principal bundles. Obstructions to the existence of equivariant gerbes and their classification are discussed. The choice of different equivariant structures on the same bundle gerbe gives rise to a new type of discrete-torsion ambiguities in the gauged amplitudes. An explicit construction of gerbes equivariant with respect to the adjoint symmetries over compact simply connected simple Lie groups is given.

  7. Applying Lean Six Sigma methodology to reduce cesarean section rate.

    Science.gov (United States)

    Chai, Ze-Ying; Hu, Hua-Min; Ren, Xiu-Ling; Zeng, Bao-Jin; Zheng, Ling-Zhi; Qi, Feng

    2017-06-01

    This study aims to reduce cesarean section rate and increase rate of vaginal delivery. By using Lean Six Sigma (LSS) methodology, the cesarean section rate was investigated and analyzed through a 5-phase roadmap consisting of Define, Measure, Analyze, Improve, and Control. The principal causes of cesarean section were identified, improvement measures were implemented, and the rate of cesarean section before and after intervention was compared. After patients with a valid medical reason for cesarean were excluded, the main causes of cesarean section were maternal request, labor pain, parturient women assessment, and labor observation. A series of measures was implemented, including an improved parturient women assessment system, strengthened pregnancy nutrition guidance, implementation of painless labor techniques, enhanced midwifery team building, and promotion of childbirth-assist skills. Ten months after introduction of the improvement measures, the cesarean section rate decreased from 41.83% to 32.00%, and the Six Sigma score (ie, Z value) increased from 1.706 to 1.967 (P < .001). LSS is an effective way to reduce the rate of cesarean section. © 2016 John Wiley & Sons, Ltd.

  8. Improving Quality of Seal Leak Test Product using Six Sigma

    Science.gov (United States)

    Luthfi Malik, Abdullah; Akbar, Muhammad; Irianto, Dradjad

    2016-02-01

    Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure.

  9. Binding of kappa- and sigma-opiates in rat brain

    International Nuclear Information System (INIS)

    Wolozin, B.L.; Nishimura, S.; Pasternak, G.W.

    1982-01-01

    Detailed displacements of [ 3 H]dihydromorphine by ketocyclazocine and SKF 10,047, [ 3 H]ethylketocyclazocine by SKF 10,047, and [ 3 H]SKF 10,047 by ketocyclazocine are all multiphasic, suggesting multiple binding sites. After treating brain tissue in vitro with naloxazone, all displacements lose the initial inhibition of 3 H-ligand binding by low concentrations of unlabeled drugs. Together with Scatchard analysis of saturation experiments, these studies suggest a common site which binds mu-, kappa, and sigma-opiates and enkephalins equally well and with highest affinity (KD less than 1 nM). The ability of unlabeled drugs to displace the low affinity binding of [ 3 H]dihydromorphine (KD . 3 nM), [ 3 H]ethylketocyclazocine (KD . 4 nM), [ 3 H]SKF 10,047 (KD . 6 nM), and D-Ala2-D-Leu5-[ 3 H]enkephalin (KD . 5 nM) remaining after treating tissue with naloxazone demonstrates unique pharmacological profiles for each. These results suggest the existence of distinct binding sites for kappa- and sigma-opiates which differ from those sites which selectively bind morphine (mu) and enkephalin

  10. Topological Poisson Sigma models on Poisson-Lie groups

    International Nuclear Information System (INIS)

    Calvo, Ivan; Falceto, Fernando; Garcia-Alvarez, David

    2003-01-01

    We solve the topological Poisson Sigma model for a Poisson-Lie group G and its dual G*. We show that the gauge symmetry for each model is given by its dual group that acts by dressing transformations on the target. The resolution of both models in the open geometry reveals that there exists a map from the reduced phase of each model (P and P*) to the main symplectic leaf of the Heisenberg double (D 0 ) such that the symplectic forms on P, P* are obtained as the pull-back by those maps of the symplectic structure on D 0 . This uncovers a duality between P and P* under the exchange of bulk degrees of freedom of one model with boundary degrees of freedom of the other one. We finally solve the Poisson Sigma model for the Poisson structure on G given by a pair of r-matrices that generalizes the Poisson-Lie case. The Hamiltonian analysis of the theory requires the introduction of a deformation of the Heisenberg double. (author)

  11. LEAN SIX SIGMA TECHNIQUES TO IMPROVE OPHTHALMOLOGY CLINIC EFFICIENCY.

    Science.gov (United States)

    Ciulla, Thomas A; Tatikonda, Mohan V; ElMaraghi, Yehya A; Hussain, Rehan M; Hill, Amanda L; Clary, Julie M; Hattab, Eyas

    2017-07-18

    Ophthalmologists serve an increasing volume of a growing elderly population undergoing increasingly complex outpatient medical care, including extensive diagnostic testing and treatment. The resulting prolonged patient visit times ("patient flow times") limit quality, patient and employee satisfaction, and represent waste. Lean Six Sigma process improvement was used in a vitreoretinal practice to decrease patient flow time, demonstrating that this approach can yield significant improvement in health care. Process flow maps were created to determine the most common care pathways within clinic. Three months' visits from the electronic medical record system, which tracks patient task times at each process step in the office were collected. Care tasks and care pathways consuming the greatest time and variation were identified and modified. Follow-up analysis from 6 weeks' visits was conducted to assess improvement. Nearly all patients took one of five paths through the office. Patient flow was redesigned to reduce waiting room time by having staff members immediately start patients into one of those five paths; staffing was adjusted to address high demand tasks, and scheduling was optimized around derived predictors of patient flow times. Follow-up analysis revealed a statistically significant decline in mean patient flow time by 18% and inpatient flow time SD by 4.6%. Patient and employee satisfaction scores improved. Manufacturing industry techniques, such as Lean and Six Sigma, can be used to improve patient care, minimize waste, and enhance patient and staff satisfaction in outpatient clinics.

  12. Semi-doubled sigma models for five-branes

    International Nuclear Information System (INIS)

    Kimura, Tetsuji

    2016-01-01

    We study two-dimensional N=(2,2) gauge theory and its dualized system in terms of complex (linear) superfields and their alternatives. Although this technique itself is not new, we can obtain a new model, the so-called “semi-doubled” GLSM. Similar to doubled sigma model, this involves both the original and dual degrees of freedom simultaneously, whilst the latter only contribute to the system via topological interactions. Applying this to the N=(4,4) GLSM for H-monopoles, i.e., smeared NS5-branes, we obtain its T-dualized systems in quite an easy way. As a bonus, we also obtain the semi-doubled GLSM for an exotic 5_2"3-brane whose background is locally nongeometric. In the low energy limit, we construct the semi-doubled NLSM which also generates the conventional string worldsheet sigma models. In the case of the NLSM for 5_2"3-brane, however, we find that the Dirac monopole equation does not make sense any more because the physical information is absorbed into the divergent part via the smearing procedure. This is nothing but the signal which indicates that the nongeometric feature emerges in the considering model.

  13. Six Sigma methods applied to cryogenic coolers assembly line

    Science.gov (United States)

    Ventre, Jean-Marc; Germain-Lacour, Michel; Martin, Jean-Yves; Cauquil, Jean-Marc; Benschop, Tonny; Griot, René

    2009-05-01

    Six Sigma method have been applied to manufacturing process of a rotary Stirling cooler: RM2. Name of the project is NoVa as main goal of the Six Sigma approach is to reduce variability (No Variability). Project has been based on the DMAIC guideline following five stages: Define, Measure, Analyse, Improve, Control. Objective has been set on the rate of coolers succeeding performance at first attempt with a goal value of 95%. A team has been gathered involving people and skills acting on the RM2 manufacturing line. Measurement System Analysis (MSA) has been applied to test bench and results after R&R gage show that measurement is one of the root cause for variability in RM2 process. Two more root causes have been identified by the team after process mapping analysis: regenerator filling factor and cleaning procedure. Causes for measurement variability have been identified and eradicated as shown by new results from R&R gage. Experimental results show that regenerator filling factor impacts process variability and affects yield. Improved process haven been set after new calibration process for test bench, new filling procedure for regenerator and an additional cleaning stage have been implemented. The objective for 95% coolers succeeding performance test at first attempt has been reached and kept for a significant period. RM2 manufacturing process is now managed according to Statistical Process Control based on control charts. Improvement in process capability have enabled introduction of sample testing procedure before delivery.

  14. Improving Quality of Seal Leak Test Product using Six Sigma

    International Nuclear Information System (INIS)

    Malik, Abdullah Luthfi; Akbar, Muhammad; Irianto, Dradjad

    2016-01-01

    Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure. (paper)

  15. A Delta-Sigma beamformer with integrated apodization

    DEFF Research Database (Denmark)

    Tomov, Borislav Gueorguiev; Stuart, Matthias Bo; Hemmsen, Martin Christian

    2013-01-01

    This paper presents a new design of a discrete time Delta-Sigma (ΔΣ) oversampled ultrasound beamformer which integrates individual channel apodization by means of variable feedback voltage in the Delta-Sigma analog to digital (A/D) converters. The output bit-width of each oversampled A/D converter...... remains the same as in an unmodified one. The outputs of all receiving channels are delayed and summed, and the resulting multi-bit sample stream is filtered and decimated to become an image line. The simplicity of this beamformer allows the production of high-channel-count or very compact beamformers....... The data are acquired using 12-bit flash A/D converters at a sampling rate of 70 MHz, and are then upsampled off-line to 560 MHz for input to the simulated ΔΣ beamformer. The latter generates a B-mode image which is compared to that produced by a digital beamformer that uses 10-bit A/D converters...

  16. Improving Quality of Shoe Soles Product using Six Sigma

    Science.gov (United States)

    Jesslyn Wijaya, Athalia; Trusaji, Wildan; Akbar, Muhammad; Ma’ruf, Anas; Irianto, Dradjad

    2018-03-01

    A manufacture in Bandung produce kind of rubber-based product i.e. trim, rice rollers, shoe soles, etc. After penetrating the shoe soles market, the manufacture has met customer with tight quality control. Based on the past data, defect level of this product was 18.08% that caused the manufacture’s loss of time and money. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control (DMAIC). In the design phase, the object’s problem and definition were defined. Delphi method was also used in this phase to identify critical factors. In the measure phase, the existing process stability and sigma quality level were measured. Fishbone diagram and failure mode and effect analysis (FMEA) were used in the next phase to analyse the root cause and determine the priority issues. Improve phase was done by designing alternative improvement strategy using 5W1H method. Some improvement efforts were identified, i.e. (i) modifying design of the hanging rack, (ii) create pantone colour book and check sheet, (iii) provide pedestrian line at compound department, (iv) buying stop watch, and (v) modifying shoe soles dies. Some control strategies for continuous improvement were proposed such as SOP or reward and punishment system.

  17. SU-E-T-760: Tolerance Design for Site-Specific Range in Proton Patient QA Process Using the Six Sigma Model

    International Nuclear Information System (INIS)

    Lah, J; Shin, D; Kim, G

    2015-01-01

    Purpose: To show how tolerance design and tolerancing approaches can be used to predict and improve the site-specific range in patient QA process in implementing the Six Sigma. Methods: In this study, patient QA plans were selected according to 6 site-treatment groups: head &neck (94 cases), spine (76 cases), lung (89 cases), liver (53 cases), pancreas (55 cases), and prostate (121 cases), treated between 2007 and 2013. We evaluated a model of the Six Sigma that determines allowable deviations in design parameters and process variables in patient-specific QA, where possible, tolerance may be loosened, then customized if it necessary to meet the functional requirements. A Six Sigma problem-solving methodology is known as DMAIC phases, which are used stand for: Define a problem or improvement opportunity, Measure process performance, Analyze the process to determine the root causes of poor performance, Improve the process by fixing root causes, Control the improved process to hold the gains. Results: The process capability for patient-specific range QA is 0.65 with only ±1 mm of tolerance criteria. Our results suggested the tolerance level of ±2–3 mm for prostate and liver cases and ±5 mm for lung cases. We found that customized tolerance between calculated and measured range reduce that patient QA plan failure and almost all sites had failure rates less than 1%. The average QA time also improved from 2 hr to less than 1 hr for all including planning and converting process, depth-dose measurement and evaluation. Conclusion: The objective of tolerance design is to achieve optimization beyond that obtained through QA process improvement and statistical analysis function detailing to implement a Six Sigma capable design

  18. SU-E-T-760: Tolerance Design for Site-Specific Range in Proton Patient QA Process Using the Six Sigma Model

    Energy Technology Data Exchange (ETDEWEB)

    Lah, J [Myongji Hospital, Goyang, Gyeonggi-do (Korea, Republic of); Shin, D [National Cancer Center, Goyang-si, Gyeonggi-do (Korea, Republic of); Kim, G [University of California, San Diego, La Jolla, CA (United States)

    2015-06-15

    Purpose: To show how tolerance design and tolerancing approaches can be used to predict and improve the site-specific range in patient QA process in implementing the Six Sigma. Methods: In this study, patient QA plans were selected according to 6 site-treatment groups: head &neck (94 cases), spine (76 cases), lung (89 cases), liver (53 cases), pancreas (55 cases), and prostate (121 cases), treated between 2007 and 2013. We evaluated a model of the Six Sigma that determines allowable deviations in design parameters and process variables in patient-specific QA, where possible, tolerance may be loosened, then customized if it necessary to meet the functional requirements. A Six Sigma problem-solving methodology is known as DMAIC phases, which are used stand for: Define a problem or improvement opportunity, Measure process performance, Analyze the process to determine the root causes of poor performance, Improve the process by fixing root causes, Control the improved process to hold the gains. Results: The process capability for patient-specific range QA is 0.65 with only ±1 mm of tolerance criteria. Our results suggested the tolerance level of ±2–3 mm for prostate and liver cases and ±5 mm for lung cases. We found that customized tolerance between calculated and measured range reduce that patient QA plan failure and almost all sites had failure rates less than 1%. The average QA time also improved from 2 hr to less than 1 hr for all including planning and converting process, depth-dose measurement and evaluation. Conclusion: The objective of tolerance design is to achieve optimization beyond that obtained through QA process improvement and statistical analysis function detailing to implement a Six Sigma capable design.

  19. Sigma-1 receptor agonists directly inhibit Nav1.2/1.4 channels.

    Directory of Open Access Journals (Sweden)

    Xiao-Fei Gao

    Full Text Available (+-SKF 10047 (N-allyl-normetazocine is a prototypic and specific sigma-1 receptor agonist that has been used extensively to study the function of sigma-1 receptors. (+-SKF 10047 inhibits K(+, Na(+ and Ca2+ channels via sigma-1 receptor activation. We found that (+-SKF 10047 inhibited Na(V1.2 and Na(V1.4 channels independently of sigma-1 receptor activation. (+-SKF 10047 equally inhibited Na(V1.2/1.4 channel currents in HEK293T cells with abundant sigma-1 receptor expression and in COS-7 cells, which barely express sigma-1 receptors. The sigma-1 receptor antagonists BD 1063,BD 1047 and NE-100 did not block the inhibitory effects of (+-SKF-10047. Blocking of the PKA, PKC and G-protein pathways did not affect (+-SKF 10047 inhibition of Na(V1.2 channel currents. The sigma-1 receptor agonists Dextromethorphan (DM and 1,3-di-o-tolyl-guanidine (DTG also inhibited Na(V1.2 currents through a sigma-1 receptor-independent pathway. The (+-SKF 10047 inhibition of Na(V1.2 currents was use- and frequency-dependent. Point mutations demonstrated the importance of Phe(1764 and Tyr(1771 in the IV-segment 6 domain of the Na(V1.2 channel and Phe(1579 in the Na(V1.4 channel for (+-SKF 10047 inhibition. In conclusion, our results suggest that sigma-1 receptor agonists directly inhibit Na(V1.2/1.4 channels and that these interactions should be given special attention for future sigma-1 receptor function studies.

  20. Měření výpočetního výkonu PLC PFC200

    OpenAIRE

    Majchrák, František

    2017-01-01

    V práci sa analyzujú možnosti merania výpočetného výkonu PLC PFC200 od firmy WAGO. Prvú časť práce venujem priblíženiu funkčnosti automatu, jeho využitiu, jednotlivým možnostiam programovania, zoznamujem sa s implementáciou vlastných programových blokov v prostredí embedded Linux a zisťujem jeho prepojenie s PLC prostredím. V druhej časti práce sa sústredím na meranie výkonu, jeho typy, popis certifikovaných meraní a jeho celkové zhodnotenie. V poslednej časti je vysvetlená aplikácia, ktorá z...

  1. Measurement of $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ ratio at 13 TeV with the CMS Detector

    CERN Document Server

    Jo, Young-kwon

    2016-01-01

    The measurement of the cross section ratio $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ is presented using a data sample corresponding to an integrated luminosity of 2.3~$\\rm{fb}^{-1}$ collected in pp collisions at \\\\ $\\sqrt{s}$ = 13TeV with the CMS detector at the LHC. Events with two leptons and at least four reconstructed jets, including at least two identified as b quark jets, in the final state are selected. The measured ratio is $0.022 \\pm 0.003$(stat.)$\\pm0.006$(syst.) in the full phase space. The measured cross section $\\sigma_{t\\bar{t}b\\bar{b}}$ is $3.9 \\pm 0.6$(stat.)$\\pm1.3$(syst.) pb and $\\sigma_{t\\bar{t}jj}$ is $176 \\pm 5$(stat.)$ \\pm 33 $(syst.) pb.

  2. Non destructive method to follow the phase sigma in a duplex stainless steel; Metodologia nao destrutiva para acompanhamento da fase sigma, em um aco inoxidavel duplex

    Energy Technology Data Exchange (ETDEWEB)

    Silva, E.M.; Andrade, A.L.S. Souza; Fialho, W.M.L.; Araujo, B.R., E-mail: edgard@ifpb.edu.br [Instituto Federal de Educacao Ciencia e Tecnologia da Paraiba (IFPB), Joao Pessoa, PB (Brazil); Silva, J.H.R.; Leite, Josinaldo P.; Silva, Eloy M. [Instituto Federal de Educacao Ciencia e Tecnologia do Ceara (IFCE), CE (Brazil); Leite, Joao P. [Universidade Federal da Paraiba (UFPB), PB (Brazil)

    2014-07-01

    Duplex stainless steels are subject to embrittlement due to the formation of sigma phase, which is one with the greatest effect of weakening because they are rich in chromium and deplete the matrix of this element. In this paper, a non-destructive methodology based on measurements of Hall voltage, is presented for monitoring the formation of sigma phase at temperatures of 800 deg C and 900 deg C. Different field intensities are generated by an electromagnet and the flow of field lines is detected by a Hall effect sensor. Hall voltage measurements are proportional to the formation of sigma phase generated by different times of aging methods. The results are correlated with results of microscopic, hardness and X-ray diffraction. It was showed that exist a correlation between the Hall voltage and the amount of sigma phase. The formation of this phase influences the signal voltage by reducing the voltage. (author)

  3. Cocaine Effects on Dopaminergic Transmission Depend on a Balance between Sigma-1 and Sigma-2 Receptor Expression.

    Science.gov (United States)

    Aguinaga, David; Medrano, Mireia; Vega-Quiroga, Ignacio; Gysling, Katia; Canela, Enric I; Navarro, Gemma; Franco, Rafael

    2018-01-01

    Sigma σ 1 and σ 2 receptors are targets of cocaine. Despite sharing a similar name, the two receptors are structurally unrelated and their physiological role is unknown. Cocaine increases the level of dopamine, a key neurotransmitter in CNS motor control and reward areas. While the drug also affects dopaminergic signaling by allosteric modulations exerted by σ 1 R interacting with dopamine D 1 and D 2 receptors, the potential regulation of dopaminergic transmission by σ 2 R is also unknown. We here demonstrate that σ 2 R may form heteroreceptor complexes with D 1 but not with D 2 receptors. Remarkably σ 1 , σ 2 , and D 1 receptors may form heterotrimers with particular signaling properties. Determination of cAMP levels, MAP kinase activation and label-free assays demonstrate allosteric interactions within the trimer. Importantly, the presence of σ 2 R induces bias in signal transduction as σ 2 R ligands increase cAMP signaling whereas reduce MAP kinase activation. These effects, which are opposite to those exerted via σ 1 R, suggest that the D 1 receptor-mediated signaling depends on the degree of trimer formation and the differential balance of sigma receptor and heteroreceptor expression in acute versus chronic cocaine consumption. Although the physiological role is unknown, the heteroreceptor complex formed by σ 1 , σ 2 , and D 1 receptors arise as relevant to convey the cocaine actions on motor control and reward circuits and as a key factor in acquisition of the addictive habit.

  4. On the A-dependence of {sigma}{sub L}/{sigma}{sub T}: Skeletons in the shadow

    Energy Technology Data Exchange (ETDEWEB)

    Milana, J. [Univ. of Maryland, College Park (United States)

    1994-04-01

    A most counter-intuitive dependence in the differential cross-section in the shadowing regime is shown to result from a higher-twist nuclear enhancement in R = {sigma}{sub L}/{sigma}{sub T} which severely complicates the unravelling from present data the corresponding dependence in Q{sup 2} of the nuclear structure functions, F{sub 2}{sup A}(x,Q{sup 2}). Indeed, until precision measurements close this loophole, the extrapolations of the structure functions to either higher Q{sup 2} or other processes (as is necessary to address present data at FNAL or future experiments at RHIC) must be considered problematic. The contribution CEBAF can make in this regard by providing systematic determination of R{sub A}(x, Q{sup 2}) is thus emphasized. The purpose of this talk is to motivate an experiment CEBAF can and should do, especially if upgraded to higher energies. While providing information on nuclear structure that is interesting in itself, the added motivation is that precision results will have important impact on other high-energy experiments involving nuclear targets that have been, and will continue to be done all over the world.

  5. Cocaine Effects on Dopaminergic Transmission Depend on a Balance between Sigma-1 and Sigma-2 Receptor Expression

    Directory of Open Access Journals (Sweden)

    David Aguinaga

    2018-02-01

    Full Text Available Sigma σ1 and σ2 receptors are targets of cocaine. Despite sharing a similar name, the two receptors are structurally unrelated and their physiological role is unknown. Cocaine increases the level of dopamine, a key neurotransmitter in CNS motor control and reward areas. While the drug also affects dopaminergic signaling by allosteric modulations exerted by σ1R interacting with dopamine D1 and D2 receptors, the potential regulation of dopaminergic transmission by σ2R is also unknown. We here demonstrate that σ2R may form heteroreceptor complexes with D1 but not with D2 receptors. Remarkably σ1, σ2, and D1 receptors may form heterotrimers with particular signaling properties. Determination of cAMP levels, MAP kinase activation and label-free assays demonstrate allosteric interactions within the trimer. Importantly, the presence of σ2R induces bias in signal transduction as σ2R ligands increase cAMP signaling whereas reduce MAP kinase activation. These effects, which are opposite to those exerted via σ1R, suggest that the D1 receptor-mediated signaling depends on the degree of trimer formation and the differential balance of sigma receptor and heteroreceptor expression in acute versus chronic cocaine consumption. Although the physiological role is unknown, the heteroreceptor complex formed by σ1, σ2, and D1 receptors arise as relevant to convey the cocaine actions on motor control and reward circuits and as a key factor in acquisition of the addictive habit.

  6. Study of coherent diffractive production reactions of p + C --> [Y$^{0}$K$^{+}$] + C type and observation of the new baryonic states X(2050) --> $\\Sigma$(1385)$^{0}$K$^{+}$ and X(2000) --> $\\Sigma^{0}$K$^{+}$

    CERN Document Server

    Golovkin, S V; Kozhevnikov, A A; Kubarovskii, V P; Kulyavtsev, A I; Kurshetsov, V F; Kushnirenko, A Yu; Landsberg, G L; Molchanov, V V; Mukkin, V A; Solyanik, V I; Vavilov, D V; Victorov, V A; Balats, M Ya; Dzubenko, G B; Kamenskii, A D; Kliger, G K; Kolganov, V Z; Lakaev, V S; Lomkatsi, G S; Nilov, A P; Smolyankin, V T; Vishniakov, V V

    1994-01-01

    Study of coherent diffractive production reactions of p + C --> [Y$^{0}$K$^{+}$] + C type and observation of the new baryonic states X(2050) --> $\\Sigma$(1385)$^{0}$K$^{+}$ and X(2000) --> $\\Sigma^{0}$K$^{+}$

  7. General classical solutions of the complex Grassmannian and CP sub(N-1) sigma models

    International Nuclear Information System (INIS)

    Sasaki, Ryu.

    1983-05-01

    General classical solutions are constructed for the complex Grassmannian non-linear sigma models in two euclidean dimensions in terms of holomorphic functions. The Grassmannian sigma models are a simple generalization of the well known CP sup(N-1) model in two dimensions and they share various interesting properties; existence of (anti-) instantons, an infinite number of conserved quantities and complete integrability. (author)

  8. Facilitating Teamwork with Lean Six Sigma and Web-Based Technology

    Science.gov (United States)

    Krause, Tim

    2009-01-01

    In this article, the author outlines a variety of ways of defining, making explicit, and supporting effective team-based projects through the basic tenets of Lean Six Sigma and the use of Web-based technologies. A combination of Lean Six Sigma and a handful of project management technologies not only help in fostering the communication central to…

  9. Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation

    OpenAIRE

    Kim, Seul-Kee; Kang, Ki-Yeob; Kim, Myung-Soo; Lee, Jae-Myung

    2015-01-01

    Experimental studies in various aspects have to be conducted to maintain stable applications of super duplex stainless steels (SDSS) because the occurrence rate of sigma phase, variable temperature and growth direction of sigma phase can influence mechanical performances of SDSS. Tensile tests of precipitated SDSS were performed under various temperatures to analyze mechanical and morphological behavior.

  10. Low-Temperature Mechanical Behavior of Super Duplex Stainless Steel with Sigma Precipitation

    Directory of Open Access Journals (Sweden)

    Seul-Kee Kim

    2015-09-01

    Full Text Available Experimental studies in various aspects have to be conducted to maintain stable applications of super duplex stainless steels (SDSS because the occurrence rate of sigma phase, variable temperature and growth direction of sigma phase can influence mechanical performances of SDSS. Tensile tests of precipitated SDSS were performed under various temperatures to analyze mechanical and morphological behavior.

  11. Using Six Sigma for Performance Improvement in Business Curriculum: A Case Study

    Science.gov (United States)

    Kukreja, Anil; Ricks, Joe M., Jr.; Meyer, Jean A.

    2009-01-01

    During the last few decades, a number of quality improvement methodologies have been used by organizations. This article provides a brief review of the quality improvement literature related to academia and a case study using Six Sigma methodology to analyze students' performance in a standardized examination. We found Six Sigma to be an effective…

  12. Improving Self Service the Six Sigma Way at Newcastle University Library

    Science.gov (United States)

    Kumi, Susan; Morrow, John

    2006-01-01

    Purpose: To report on the collaborative project between Newcastle University Library and 3M which aimed to increase self-issue levels using six sigma methodology. Design/methodology/approach: The six-month long project is outlined and gives an insight into the process improvement methodology called six sigma. An explanation of why we ran the…

  13. The Treatment of Six Sigma in Introductory Operations Management Textbooks: Clearing Up the Confusion

    Science.gov (United States)

    Ravinder, Handanhal; Misra, Ram B.

    2016-01-01

    This paper critically examines the treatment of the statistical basis for Six Sigma and process capability in popular operations management textbooks. It discusses areas of confusion and suggest ways of treating the topic that make sense to instructors as well as students. Even though Six Sigma was introduced almost 30 years ago, misconceptions…

  14. Activation of sigma-1 receptor chaperone in the treatment of neuropsychiatric diseases and its clinical implication

    Directory of Open Access Journals (Sweden)

    Kenji Hashimoto

    2015-01-01

    Full Text Available Endoplasmic reticulum (ER protein sigma-1 receptor represents unique chaperone activity in the central nervous system, and it exerts a potent influence on a number of neurotransmitter systems. Several lines of evidence suggest that activation of sigma-1 receptor plays a role in the pathophysiology of neuropsychiatric diseases, as well as in the mechanisms of some therapeutic drugs and neurosteroids. Preclinical studies showed that some selective serotonin reuptake inhibitors (SSRIs; fluvoxamine, fluoxetine, excitalopram, donepezil, and ifenprodil act as sigma-1 receptor agonists. Furthermore, sigma-1 receptor agonists could improve the N-methyl-D-aspartate (NMDA antagonist phencyclidine (PCP-induced cognitive deficits in mice. A study using positron emission tomography have demonstrated that an oral administration of fluvoxamine or donepezil could bind to sigma-1 receptor in the healthy human brain, suggesting that sigma-1 receptor might be involved in the therapeutic mechanisms of these drugs. Moreover, case reports suggest that sigma-1 receptor agonists, including fluvoxamine, and ifenprodil, may be effective in the treatment of cognitive impairment in schizophrenia, delirium in elderly people, and flashbacks in post-traumatic stress disorder. In this review article, the author would like to discuss the clinical implication of sigma-1 receptor agonists, including endogenous neurosteroids, in the neuropsychiatric diseases.

  15. Usulan Perbaikan Kualitas Penggulungan Benang Nilon Dengan Menggunakan Metode Six Sigma di PT. XYZ

    Directory of Open Access Journals (Sweden)

    I Wayan Sukania

    2016-07-01

    Full Text Available Abstrak: PT. XYZ merupakan perusahaan yang bergerak dibidang textil yang memproduksi benang jahit. Perusahaan selalu berusaha meningkatkan kualitas produknya dalam penanganan produk yang cacat yang terjadi pada proses produksi karena jumlah cacat yang timbul cukup banyak. Untuk itu perlu dilakukan tindakan perbaikan dalam menurunkan tingkat cacat yang terjadi. Pada penelitian ini, penulis menggunakan metode six sigma dengan model perbaikian Define-Measure-Analyze-Improve-Control (DMAIC dan Failure Mode and Effect Analysis (FMEA untuk menganalisis kinerja proses dan produk yang dihasilkan. Penerapan metode tersebut diharapakan mampu meningkatkan kualitas perusahaan yang sekarang pada level sigma 3,8 menuju tingkat kinerja kualitas 6 Sigma. Kata kunci: Six Sigma, FMEA Abstract: PT. XYZ is a company engaged in textile-producing sewing thread. The company is always trying to improve the quality of products due to quite a lot of products defects occur in the production process. It is necessary for corrective action in reducing the level of defects that occur. In this research, the six sigma with Define-Measure Analyze-Improve-Control (DMAIC and Failure Mode and Effect Analysis (FMEA models were used to analyze the performance of processes and products. Application of those methods are expected to be able to improve the quality of company that are now at the level of sigma 3,8 to 6 sigma level of quality performance . Keywords: Six Sigma, FMEA

  16. Lean Six Sigma in Healthcare: Combating the Military’s Escalating Pharmacy Costs

    Science.gov (United States)

    2009-04-30

    SYSTEM CMOP CONSOLIDATED MAIL ORDER PHARMACY CTQ CRITICAL TO QUALITY DLA DEFENSE LOGISTICS AGENCY DLI DEFENSE LANGUAGE INSTITUTE DMAIC DEFINE...standard improvement procedure in Six Sigma is DMAIC (Define, Measure, Analyze, Improve and Control). DMAIC is a structured, disciplined, rigorous...and techniques prescribed in the DMAIC methodology (Define, Measure, Analyze, Improve and Control) of Lean Six Sigma. To better understand the

  17. IBIS UvA: research and consultancy in Lean Six Sigma

    NARCIS (Netherlands)

    Kemper, B.; de Mast, J.

    2008-01-01

    Lean Six Sigma is an advanced process improvement methodology. Initially, Six Sigma focused on the reduction of the number of defects in manufacturing. It was introduced at Motorola in 1986, and it incorporates previous methodologies, such as Statistical Process Control, Total Quality Management,

  18. Sigma and beta convergence in regional mortality: A case study of the Netherlands

    Directory of Open Access Journals (Sweden)

    Fanny Janssen

    2016-07-01

    Full Text Available Background: For allocation of health budgets it is important to know whether regional mortality differences tend to decline or to increase. Sigma convergence tests can measure whether the dispersion of the regional distribution of mortality has declined. Beta convergence tests can examine whether regions with a low level of life expectancy have experienced a stronger increase than regions with a high level. In demographic research, however, sigma and beta convergence have not been formally assessed simultaneously. Objective: We demonstrate the application of both sigma and beta convergence tests to the study of trends in regional mortality differences for the Netherlands. Methods: Using all-cause mortality and population data for 40 Dutch NUTS-3 regions, by year (1988‒2009, age group, and sex, we assess both sigma and beta convergence, and ist significance. Results: Beta convergence proved statistically significant. The regions with the lowest life expectancy in 1988 generally exhibited the highest increase from 1988 to 2009, and vice versa. However, dispersion measures displayed no statistically significant sigma convergence. Conclusions: Whereas the absence of sigma convergence shows that regional mortality differences have not declined, beta convergence indicates that the disadvantage of regions with low life expectancy is not persistent. Contribution: We demonstrated the added value of simultaneously studying sigma convergence, beta convergence, and trajectories of regions in the tails of the distribution. Where absence of sigma convergence does not imply that disadvantaged regions did not improve, beta convergence does not always indicate complete convergence due to structural differences across regions.

  19. Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

    Science.gov (United States)

    Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

    2014-01-01

    Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

  20. Tripod sigma: results of a pro-active work stress-survey

    NARCIS (Netherlands)

    Nelemans, R.; Wiezer, N.; Vaas, F.; Gort, J.; Groeneweg, J.

    2003-01-01

    Work related stress is an important causes of disability and absenteeism. TNO Work and Employment has developed an instrument, called Tripod Sigma, that identifies risks to work stress and provides tools for remedying these risks. The Tripod Sigma model is developed analogous to the Tripod

  1. Fixed target flammable gas upgrades

    International Nuclear Information System (INIS)

    Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

    1996-12-01

    In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only

  2. A fixed-point farrago

    CERN Document Server

    Shapiro, Joel H

    2016-01-01

    This text provides an introduction to some of the best-known fixed-point theorems, with an emphasis on their interactions with topics in analysis. The level of exposition increases gradually throughout the book, building from a basic requirement of undergraduate proficiency to graduate-level sophistication. Appendices provide an introduction to (or refresher on) some of the prerequisite material and exercises are integrated into the text, contributing to the volume’s ability to be used as a self-contained text. Readers will find the presentation especially useful for independent study or as a supplement to a graduate course in fixed-point theory. The material is split into four parts: the first introduces the Banach Contraction-Mapping Principle and the Brouwer Fixed-Point Theorem, along with a selection of interesting applications; the second focuses on Brouwer’s theorem and its application to John Nash’s work; the third applies Brouwer’s theorem to spaces of infinite dimension; and the fourth rests ...

  3. A healthcare Lean Six Sigma System for postanesthesia care unit workflow improvement.

    Science.gov (United States)

    Kuo, Alex Mu-Hsing; Borycki, Elizabeth; Kushniruk, Andre; Lee, Te-Shu

    2011-01-01

    The aim of this article is to propose a new model called Healthcare Lean Six Sigma System that integrates Lean and Six Sigma methodologies to improve workflow in a postanesthesia care unit. The methodology of the proposed model is fully described. A postanesthesia care unit case study is also used to demonstrate the benefits of using the Healthcare Lean Six Sigma System model by combining Lean and Six Sigma methodologies together. The new model bridges the service gaps between health care providers and patients, balances the requirements of health care managers, and delivers health care services to patients by taking the benefits of the Lean speed and Six Sigma high-quality principles. The full benefits of the new model will be realized when applied at both strategic and operational levels. For further research, we will examine how the proposed model is used in different real-world case studies.

  4. SIX SIGMA FRAMEWORKS: AN ANALYSIS BASED ON ROGERS’ DIFFUSION OF INNOVATION THEORY

    Directory of Open Access Journals (Sweden)

    Kifayah Amar

    2012-06-01

    Full Text Available This paper attempt to analyze frameworks related to Six Sigma and Lean Six Sigma. The basis of analysis the frameworks is the diffusion of innovation theory. Several criteria was used to analyze the frameworks e.g. relative advantage, compatibility, complexity, trialability, observability, communication channels, nature of the social system/culture and extent of change agent. Based on framework analysis, there is only one framework fits to Rogers’ theory on diffusion of innovation. The framework is a Lean Six Sigma framework which consists elements such owner/manager commitment and involvement, employee involvement, training, culture change and external support. Even though the elements have similarity to other Six Sigma frameworks but they put more attention on culture change and external support. Generally speaking, the culture change and external support are the most important elements to the implementation of Six Sigma or other soft approaches particularly for small organizations.

  5. Comments on Nonlinear Sigma Models Coupled to Supergravity arXiv

    CERN Document Server

    Ferrara, Sergio

    2017-12-10

    N=1 , D=4 nonlinear sigma models, parametrized by chiral superfields, usually describe Kählerian geometries, provided that Einstein frame supergravity is used. The sigma model metric is no longer Kähler when local supersymmetry becomes nonlinearly realized through the nilpotency of the supergravity auxiliary fields. In some cases the nonlinear realization eliminates one scalar propagating degree of freedom. This happens when the sigma model conformal-frame metric has co-rank 2. In the geometry of the inflaton, this effect eliminates its scalar superpartner. We show that the sigma model metric remains semidefinite positive in all cases, due the to positivity properties of the conformal-frame sigma model metric.

  6. SIX SIGMA FRAMEWORKS: AN ANALYSIS BASED ON ROGERS’ DIFFUSION OF INNOVATION THEORY

    Directory of Open Access Journals (Sweden)

    Kifayah Amar

    2012-06-01

    Full Text Available This paper attempt to analyze frameworks related to Six Sigma and Lean Six Sigma. The basis of analysis the frameworks is the diffusion of innovation theory. Several criteria was used to analyze the frameworks e.g. relative advantage, compatibility, complexity, trialability, observability, communication channels, nature of the social system/culture and extent of change agent.    Based on framework analysis, there is only one framework fits to Rogers’ theory on diffusion of innovation. The framework is a Lean Six Sigma framework which consists elements such owner/manager commitment and involvement, employee involvement, training, culture change and external support. Even though the elements have similarity to other Six Sigma frameworks but they put more attention on culture change and external support. Generally speaking, the culture change and external support are the most important elements to the implementation of Six Sigma or other soft approaches particularly for small organizations.

  7. Study of $\\Sigma$(1385) and $\\Xi$(1321) hyperon and antihyperon production in deep inelastic muon scattering

    CERN Document Server

    Adolph, C; Alexakhin, V.Yu; Alexandrov, Yu.; Alexeev, G D; Amoroso, A; Austregesilo, A; Badelek, B; Balestra, F; Barth, J; Baum, G; Bedfer, Y; Berlin, A; Bernhard, J; Bertini, R; Bicker, K; Bieling, J; Birsa, R; Bisplinghoff, J; Bordalo, P; Bradamante, F; Braun, C; Bravar, A; Bressan, A; Buchele, M; Burtin, E; Capozza, L; Chiosso, M; Chung, S U; Cicuttin, A; Crespo, M L; Dalla Torre, S; Dasgupta, S S; Dasgupta, S; Denisov, O.Yu; Donskov, S V; Doshita, N; Duic, V; Dunnweber, W; Dziewiecki, M; Efremov, A; Elia, C; Eversheim, P D; Eyrich, W; Faessler, M; Ferrero, A; Filin, A; Finger, M; Finger, M., Jr; Fischer, H; Franco, C; von Hohenesche, N. du Fresne; Friedrich, J M; Frolov, V; Garfagnini, R; Gautheron, F; Gavrichtchouk, O P; Gerassimov, S; Geyer, R; Giorgi, M; Gnesi, I; Gobbo, B; Goertz, S; Grabmuller, S; Grasso, A; Grube, B; Gushterski, R; Guskov, A; Guthorl, T; Haas, F; von Harrach, D; Heinsius, F H; Herrmann, F; Hess, C; Hinterberger, F; Hoppner, Ch; Horikawa, N; d'Hose, N; Huber, S; Ishimoto, S; Ivanshin, Yu; Iwata, T; Jahn, R; Jary, V; Jasinski, P; Joosten, R; Kabuss, E; Kang, D; Ketzer, B; Khaustov, G V; Khokhlov, Yu. A; Kisselev, Yu; Klein, F; Klimaszewski, K; Koivuniemi, J H; Kolosov, V N; Kondo, K; Konigsmann, K; Konorov, I; Konstantinov, V F; Kotzinian, A M; Kouznetsov, O; Kramer, M; Kroumchtein, Z V; Kuchinski, N; Kunne, F.; Kurek, K; Kurjata, R P; Lednev, A A; Lehmann, A; Levorato, S; Lichtenstadt, J; Maggiora, A; Magnon, A; Makke, N; Mallot, G K; Mann, A; Marchand, C; Martin, A; Marzec, J; Matsuda, H; Matsuda, T; Meshcheryakov, G; Meyer, W; Michigami, T; Mikhailov, Yu. V; Miyachi, Y; Morreale, A; Nagaytsev, A; Nagel, T.; Nerling, F; Neubert, S; Neyret, D; Nikolaenko, V I; Novy, J; Nowak, W D; Nunes, A.S.; Olshevsky, A G; Ostrick, M; Panknin, R; Panzieri, D; Parsamyan, B; Paul, S.; Piragino, G; Platchkov, S; Pochodzalla, J; Polak, J; Polyakov, V A; Pretz, J; Quaresma, M; Quintans, C; Ramos, S; Reicherz, G; Rocco, E; Rodionov, V; Rondio, E; Rossiyskaya, N S; Ryabchikov, D I; Samoylenko, V D; Sandacz, A; Sapozhnikov, M G; Sarkar, S.; Savin, I A; Sbrizzai, G; Schiavon, P; Schill, C.; Schluter, T.; Schmidt, A; Schmidt, K; Schmitt, L; Schmiden, H; Schonning, K; Schopferer, S; Schott, M; Shevchenko, O.Yu; Silva, L.; Sinha, L; Sirtl, S; Sosio, S; Sozzi, F; Srnka, A; Steiger, L; Stolarski, M; Sulc, M; Sulej, R; Suzuki, H; Sznajder, P; Takekawa, S; Wolbeek, J.Ter; Tessaro, S; Tessarotto, F; Thibaud, F; Uhl, S; Uman, I; Vandenbroucke, M; Virius, M; Wang, L; Weisrock, T; Wilfert, M; Windmolders, R; Wislicki, W; Wollny, H; Zaremba, K; Zavertyaev, M; Zemlyanichkina, E; Zhuravlev, N; Ziembicki, M

    2013-01-01

    Large samples of $\\Lambda$, $\\Sigma(1385)$ and $\\Xi(1321)$ hyperons produced in deep-inelastic muon scattering off a $^6$LiD target were collected with the COMPASS experimental setup at CERN. The relative yields of $\\Sigma(1385)^+$, $\\Sigma(1385)^-$, $\\bar{\\Sigma}(1385)^-$, $\\bar{\\Sigma}(1385)^+$, $\\Xi(1321)^-$, and $\\bar{\\Xi}(1321)^+$ hyperons decaying into $\\Lambda(\\bar{\\Lambda})\\pi$ were measured. The heavy hyperon to $\\Lambda$ and heavy antihyperon to $\\bar{\\Lambda}$ yield ratios were found to be in the range 3.8% to 5.6% with a relative uncertainty of about 10%. They were used to tune the parameters relevant for strange particle production of the LEPTO Monte Carlo generator.

  8. Study of {Sigma}(1385) and {Xi}(1321) hyperon and antihyperon production in deep inelastic muon scattering

    Energy Technology Data Exchange (ETDEWEB)

    Adolph, C.; Braun, C.; Eyrich, W.; Lehmann, A.; Schmidt, A. [Universitaet Erlangen-Nuernberg, Physikalisches Institut, Erlangen (Germany); Alekseev, M.G.; Birsa, R.; Bravar, A.; Dalla Torre, S.; Dasgupta, S.S.; Gobbo, B.; Sozzi, F.; Steiger, L.; Tessaro, S.; Tessarotto, F. [Trieste Section of INFN, Trieste (Italy); Alexakhin, V.Y.; Alexeev, G.D.; Efremov, A.; Gavrichtchouk, O.P.; Gushterski, R.; Guskov, A.; Ivanshin, Y.; Kroumchtein, Z.V.; Kuchinski, N.; Meshcheryakov, G.; Nagaytsev, A.; Olshevsky, A.G.; Rodionov, V.; Rossiyskaya, N.S.; Sapozhnikov, M.G.; Savin, I.A.; Shevchenko, O.Y.; Zemlyanichkina, E.; Zhuravlev, N. [Joint Institute for Nuclear Research, Dubna, Moscow region (Russian Federation); Alexandrov, Y. [Lebedev Physical Institute, Moscow (Russian Federation); Amoroso, A.; Balestra, F.; Bertini, R.; Chiosso, M.; Garfagnini, R.; Gnesi, I.; Grasso, A.; Kotzinian, A.M.; Parsamyan, B.; Piragino, G.; Sosio, S. [University of Turin, Department of Physics (Italy); Torino Section of INFN, Turin (Italy); Austregesilo, A.; Bicker, K. [CERN, Geneva 23 (Switzerland); Technische Universitaet Muenchen, Physik Department, Garching (Germany); Badelek, B. [University of Warsaw, Faculty of Physics, Warsaw (Poland); Barth, J.; Bieling, J.; Goertz, S.; Klein, F.; Panknin, R.; Pretz, J.; Windmolders, R. [Universitaet Bonn, Physikalisches Institut, Bonn (Germany); Baum, G. [Universitaet Bielefeld, Fakultaet fuer Physik, Bielefeld (Germany); Bedfer, Y.; Burtin, E.; Capozza, L.; Ferrero, A.; Hose, N. d' ; Kunne, F.; Magnon, A.; Marchand, C.; Morreale, A.; Neyret, D.; Platchkov, S.; Thibaud, F.; Vandenbroucke, M.; Wollny, H. [CEA IRFU/SPhN Saclay, Gif-sur-Yvette (France); Berlin, A.; Gautheron, F.; Hess, C.; Kisselev, Y.; Koivuniemi, J.H.; Meyer, W.; Reicherz, G.; Wang, L. [Universitaet Bochum, Institut fuer Experimentalphysik, Bochum (Germany); Bernhard, J.; Harrach, D. von; Jasinski, P.; Kabuss, E.; Kang, D.; Ostrick, M.; Pochodzalla, J.; Weisrock, T.; Wilfert, M. [Universitaet Mainz, Institut fuer Kernphysik, Mainz (Germany); Bisplinghoff, J.; Eversheim, P.D.; Hinterberger, F.; Jahn, R.; Joosten, R.; Schmiden, H. [Universitaet Bonn, Helmholtz-Institut fuer Strahlen- und Kernphysik, Bonn (Germany); Bordalo, P.; Franco, C.; Nunes, A.S.; Quaresma, M.; Quintans, C.; Ramos, S.; Silva, L.; Stolarski, M. [LIP, Lisbon (Portugal); Bradamante, F.; Bressan, A.; Duic, V.; Elia, C.; Giorgi, M.; Levorato, S.; Martin, A.; Sbrizzai, G.; Schiavon, P. [University of Trieste, Department of Physics (Italy); Trieste Section of INFN, Trieste (Italy); Buechele, M.; Fischer, H.; Guthoerl, T.; Heinsius, F.H.; Herrmann, F.; Koenigsmann, K.; Nerling, F.; Nowak, W.D.; Schill, C.; Schmidt, K.; Schopferer, S.; Sirtl, S.; Wolbeek, J. ter [Universitaet Freiburg, Physikalisches Institut, Freiburg (Germany); Chung, S.U.; Friedrich, J.M.; Grabmueller, S.; Grube, B.; Haas, F.; Hoeppner, C.; Huber, S.; Ketzer, B.; Kraemer, M.; Mann, A.; Nagel, T.; Neubert, S.; Paul, S.; Schmitt, L.; Uhl, S. [Technische Universitaet Muenchen, Physik Department, Garching (Germany); Cicuttin, A.; Crespo, M.L. [Abdus Salam ICTP, Trieste (Italy); Trieste Section of INFN, Trieste (Italy); Dasgupta, S.; Sarkar, S.; Sinha, L. [Matrivani Institute of Experimental Research and Education, Calcutta (India); Denisov, O.Y.; Maggiora, A.; Takekawa, S. [Torino Section of INFN, Turin (Italy); Donskov, S.V.; Filin, A.; Khaustov, G.V.; Khokhlov, Y.A.; Kolosov, V.N.; Konstantinov, V.F.; Lednev, A.A.; Mikhailov, Yu.V.; Nikolaenko, V.I.; Polyakov, V.A.; Ryabchikov, D.I.; Samoylenko, V.D. [State Research Center of the Russian Federation, Institute for High Energy Physics, Protvino (Russian Federation); Doshita, N.; Ishimoto, S.; Iwata, T.; Kondo, K.; Matsuda, H.; Michigami, T.; Miyachi, Y.; Suzuki, H. [Yamagata University, Yamagata (Japan); Duennweber, W.; Faessler, M.; Geyer, R.; Schlueter, T.; Uman, I. [Ludwig-Maximilians-Universitaet Muenchen, Department fuer Physik, Munich (Germany); Dziewiecki, M.; Kurjata, R.P.; Marzec, J.; Zaremba, K.; Ziembicki, M. [Warsaw University of Technology, Institute of Radioelectronics, Warsaw (Poland); Finger, M.; Finger, M.; Novy, J. [Charles University in Prague, Faculty of Mathematics and Physics, Prague (Czech Republic); Du Fresne von Hohenesche, N. [CERN, Geneva 23 (Switzerland); Universitaet Mainz, Institut fuer Kernphysik, Mainz (Germany); Frolov, V.; Mallot, G.K.; Rocco, E.; Schoenning, K.; Schott, M. [CERN, Geneva 23 (Switzerland); Gerassimov, S.; Konorov, I. [Lebedev Physical Institute, Moscow (Russian Federation); Technische Universitaet Muenchen, Physik Department, Garching (Germany); Horikawa, N. [Nagoya University, Nagoya (Japan); Jary, V.; Virius, M. [Czech Technical University in Prague, Prague (Czech Republic); Klimaszewski, K.; Kurek, K.; Rondio, E.; Sandacz, A.; Sulej, R.; Sznajder, P.; Wislicki, W. [National Centre for Nuclear Research, Warsaw (Poland); Kouznetsov, O. [Joint Institute for Nuclear Research, Dubna, Moscow region (Russian Federation); CEA IRFU/SPhN Saclay, Gif-sur-Yvette (France); Lichtenstadt, J. [Tel Aviv University, School of Physics and Astronomy, Tel Aviv (Israel); Makke, N. [CEA IRFU/SPhN Saclay, Gif-sur-Yvette (France); University of Trieste, Department of Physics (IT); Trieste Section of INFN, Trieste (IT); Matsuda, T. [University of Miyazaki, Miyazaki (JP); Panzieri, D. [University of Eastern Piedmont, Alessandria (IT); Polak, J. [Technical University in Liberec, Liberec (CZ); University of Trieste, Department of Physics (IT); Trieste Section of INFN, Trieste (IT); Srnka, A. [AS CR, Institute of Scientific Instruments, Brno (CZ); Sulc, M. [Technical University in Liberec, Liberec (CZ); Zavertyaev, M. [Lebedev Physical Institute, Moscow (RU)

    2013-10-15

    Large samples of {Lambda}, {Sigma}(1385) and {Xi}(1321) hyperons produced in the deep-inelastic muon scattering off a {sup 6}LiD target were collected with the COMPASS experimental setup at CERN. The relative yields of {Sigma}(1385){sup +}, {Sigma}(1385){sup -}, anti {Sigma}(1385){sup -}, anti {Sigma}(1385){sup +}, {Xi}(1321){sup -}, and anti {Xi}(1321){sup +} hyperons decaying into {Lambda}(anti {Lambda}){pi} were measured. The ratios of heavy-hyperon to {Lambda} and heavy-antihyperon to anti {Lambda} were found to be in the range 3.8 % to 5.6 % with a relative uncertainty of about 10 %. They were used to tune the parameters relevant for strange particle production of the LEPTO Monte Carlo generator. (orig.)

  9. Lean Six Sigma Application in Rear Combination Automotive Lighting Process

    Science.gov (United States)

    Sodkomkham, Thanwarhat; Chutima, Parames

    2016-05-01

    The case study company produces various front and rear lightings for automobiles and motorcycles. Currently, it faces two problems, i.e. high defective rate and high inventory. Lean Six Sigma was applied as a tool to solve the first problem, whereas the other problem was managed by changing the production concept from push to pull. The results showed that after applying all new settings to the process, the defect rate was reduced from 36,361 DPPM to 3,029 DPPM. In addition, after the implementation of the Kanban system, the company achieved substantial improvement in lead time reduction by 44%, in-process inventory reduction by 42%, finished good inventory reduction by 50%, and finished good area increased by 16%.

  10. Nanometer CMOS Sigma-Delta Modulators for Software Defined Radio

    CERN Document Server

    Morgado, Alonso; Rosa, José M

    2012-01-01

    This book presents innovative solutions for the implementation of Sigma-Delta Modulation (SDM) based Analog-to-Digital Conversion (ADC), required for the next generation of wireless hand-held terminals. These devices will be based on the so-called multistandard transceiver chipsets, integrated in nanometer CMOS technologies. One of the most challenging and critical parts in such transceivers is the analog-digital interface, because of the assorted signal bandwidths and dynamic ranges that can be required to handle the A/D conversion for several operation modes.   This book describes new adaptive and reconfigurable SDM ADC topologies, circuit strategies and synthesis methods, specially suited for multi-standard wireless telecom systems and future Software-defined-radios (SDRs) integrated in nanoscale CMOS. It is a practical book, going from basic concepts to the frontiers of SDM architectures and circuit implementations, which are explained in a didactical and systematic way. It gives a comprehensive overview...

  11. Six Sigma: Problems, Limitations, Critical Success Factors and Future Prospects

    Directory of Open Access Journals (Sweden)

    Paulo Mazieiro Pohlmann

    2015-12-01

    Full Text Available Six Sigma is a business strategy based on objective decision making and problem solving in order to achieve, maintain and maximize business success through understanding and meeting the needs of customers. The visualization of this methodology as a powerful tool in reducing variability and improving quality led to the interest in performing this bibliographical study, whose purpose was to assess the critical success factors and future prospects of this managerial system. A survey was conducted in order to discover the main critical success factors of the implementation of the methodology in organizations, among which stood out the proper selection of projects, connecting the project with the business strategy, customer focus, financial, human and infrastructure resources, the involvement of senior management, professional training, and cultural change.

  12. Sigma-delta modulator modeling analysis and design

    Energy Technology Data Exchange (ETDEWEB)

    Ge Binjie; Wang Xin' an; Zhang Xing; Feng Xiaoxing; Wang Qingqin, E-mail: wangxa@szpku.edu.c [Key Laboratory of Integrated Microsystem Science and Engineering Applications, Shenzhen Graduate School of Peking University, Shenzhen 518055 (China)

    2010-09-15

    This paper introduces a new method for SC sigma-delta modulator modeling. It studies the integrator's different equivalent circuits in the integrating and sampling phases. This model uses the OP-AMP input pair's tail current (I{sub 0}) and overdrive voltage (v{sub on}) as variables. The modulator's static and dynamic errors are analyzed. A group of optimized I{sub 0} and v{sub on} for maximum SNR and power x area ratio can be obtained through this model. As examples, a MASH21 modulator for digital audio and a second order modulator for RFID baseband are implemented and tested, and they can achieve 91 dB and 72 dB respectively, which verifies the modeling and design criteria. (semiconductor integrated circuits)

  13. Locally supersymmetric D=3 non-linear sigma models

    International Nuclear Information System (INIS)

    Wit, B. de; Tollsten, A.K.; Nicolai, H.

    1993-01-01

    We study non-linear sigma models with N local supersymmetries in three space-time dimensions. For N=1 and 2 the target space of these models is riemannian or Kaehler, respectively. All N>2 theories are associated with Einstein spaces. For N=3 the target space is quaternionic, while for N=4 it generally decomposes, into two separate quaternionic spaces, associated with inequivalent supermultiplets. For N=5, 6, 8 there is a unique (symmetric) space for any given number of supermultiplets. Beyond that there are only theories based on a single supermultiplet for N=9, 10, 12 and 16, associated with coset spaces with the exceptional isometry groups F 4(-20) , E 6(-14) , E 7(-5) and E 8(+8) , respectively. For N=3 and N ≥ 5 the D=2 theories obtained by dimensional reduction are two-loop finite. (orig.)

  14. Sigma exchange in the nuclear force and effective field theory

    International Nuclear Information System (INIS)

    Donoghue, John F.

    2006-01-01

    In the phenomenological description of the nuclear interaction an important role is traditionally played by the exchange of a scalar I=0 meson, the sigma, of mass 500-600 MeV, which however is not seen clearly in the particle spectrum and which has a very ambiguous status in QCD. I show that a remarkably simple and reasonably controlled combination of ingredients can reproduce the features of this part of the nuclear force. The use of chiral perturbation theory calculations for two pion exchange supplemented by the Omnes function for pion rescattering suffices to reproduce the magnitude and shape of the exchange of a supposed σ particle. I also attempt to relate this description to the contact interaction that enters more modern descriptions of the internucleon interaction

  15. The sigma-1 receptor: roles in neuronal plasticity and disease

    Science.gov (United States)

    Kourrich, Saïd; Su, Tsung-Ping; Fujimoto, Michiko; Bonci, Antonello

    2012-01-01

    Sigma-1 receptors (Sig-1Rs) have been implicated in many neurological and psychiatric conditions. The Sig-1R is an intracellular chaperone that resides specifically at the endoplasmic reticulum (ER)-mitochondrion interface referred to as the mitochondrion-associated ER membrane (MAM). Here, Sig-1Rs regulate ER-mitochondrion Ca2+ signaling. In this review, we discuss the current understanding of Sig-1R functions. Based on this, we suggest that the key cellular mechanism linking Sig-1Rs to neurological disorders involve the translocation of Sig-1Rs from the MAM to other parts of the cell, whereby Sig-1Rs bind and modulate the activities of various ion channels, receptors, or kinases. Thus, Sig-1Rs and their associated ligands may represent new avenues for treating some aspects of neurological and psychiatric diseases. PMID:23102998

  16. Sigma-delta modulator modeling analysis and design

    International Nuclear Information System (INIS)

    Ge Binjie; Wang Xin'an; Zhang Xing; Feng Xiaoxing; Wang Qingqin

    2010-01-01

    This paper introduces a new method for SC sigma-delta modulator modeling. It studies the integrator's different equivalent circuits in the integrating and sampling phases. This model uses the OP-AMP input pair's tail current (I 0 ) and overdrive voltage (v on ) as variables. The modulator's static and dynamic errors are analyzed. A group of optimized I 0 and v on for maximum SNR and power x area ratio can be obtained through this model. As examples, a MASH21 modulator for digital audio and a second order modulator for RFID baseband are implemented and tested, and they can achieve 91 dB and 72 dB respectively, which verifies the modeling and design criteria. (semiconductor integrated circuits)

  17. Reactions of sigma-bonded organochromium(III)complexes

    International Nuclear Information System (INIS)

    Leslie, J.P. II.

    1975-12-01

    Three projects were carried out, each dealing with the kinetics and mechanism of reactions of sigma-bonded organochromium(III) complexes of the form (H 2 O) 5 CrR 2+ . Part I describes the kinetics of the reaction of dichloromethylchromium(III) ion with chromium(II) ion in aqueous acid. Part II deals with the radioexchange of 4-pyridinomethylchromium(III) ion with 51 Cr 2+ and the kinetics of formation of the organochromium species at 55 0 in 1 M H + . Part III deals with the reactions of Hg 2+ and CH 3 Hg + with a series of (H 2 O) 5 CrR 2+ complexes, in which R is an aliphatic alkyl group, a haloalkyl group, or an aralkyl group

  18. 2D sigma models and differential Poisson algebras

    International Nuclear Information System (INIS)

    Arias, Cesar; Boulanger, Nicolas; Sundell, Per; Torres-Gomez, Alexander

    2015-01-01

    We construct a two-dimensional topological sigma model whose target space is endowed with a Poisson algebra for differential forms. The model consists of an equal number of bosonic and fermionic fields of worldsheet form degrees zero and one. The action is built using exterior products and derivatives, without any reference to a worldsheet metric, and is of the covariant Hamiltonian form. The equations of motion define a universally Cartan integrable system. In addition to gauge symmetries, the model has one rigid nilpotent supersymmetry corresponding to the target space de Rham operator. The rigid and local symmetries of the action, respectively, are equivalent to the Poisson bracket being compatible with the de Rham operator and obeying graded Jacobi identities. We propose that perturbative quantization of the model yields a covariantized differential star product algebra of Kontsevich type. We comment on the resemblance to the topological A model.

  19. FORMATION OF SIX SIGMA INFRASTRUCTURE FOR THE CORONARY STENTING PROCESS

    Directory of Open Access Journals (Sweden)

    Mehmet Tolga Taner

    2013-10-01

    Full Text Available The purpose of this study is to show how a tertiary care center in Turkey operating mainly in cardiology initiated Six Sigma principles to reduce the number of complications occuring during coronary stent insertion process. A Six Sigma’s Define-Measure-Analyze-Improve-Control (DMAIC model for coronary stent insertion is suggested. Data were collected for 24-months. Twenty-two Critical-to-Quality (CTQ factors were identified for successful coronary stent insertion. The most frequent causes of complications in the process were found to be patients with previous bypass surgery or PCI, inexperience of staff members, highly damaged vessel structure, thin and/or long vessel diameter, inappropriate selection of stent type, inappropriate selection of balloon type and poor image quality.

  20. The sigma-1 receptor: roles in neuronal plasticity and disease.

    Science.gov (United States)

    Kourrich, Saïd; Su, Tsung-Ping; Fujimoto, Michiko; Bonci, Antonello

    2012-12-01

    Sigma-1 receptors (Sig-1Rs) have been implicated in many neurological and psychiatric conditions. Sig-1Rs are intracellular chaperones that reside specifically at the endoplasmic reticulum (ER)-mitochondrion interface, referred to as the mitochondrion-associated ER membrane (MAM). Here, Sig-1Rs regulate ER-mitochondrion Ca(2+) signaling. In this review, we discuss the current understanding of Sig-1R functions. Based on this, we suggest that the key cellular mechanisms linking Sig-1Rs to neurological disorders involve the translocation of Sig-1Rs from the MAM to other parts of the cell, whereby Sig-1Rs bind and modulate the activities of various ion channels, receptors, or kinases. Thus, Sig-1Rs and their associated ligands may represent new avenues for treating aspects of neurological and psychiatric diseases. Published by Elsevier Ltd.