A sampling strategy for estimating plot average annual fluxes of chemical elements from forest soils

NARCIS (Netherlands)

Brus, D.J.; Gruijter, de J.J.; Vries, de W.

2010-01-01

A sampling strategy for estimating spatially averaged annual element leaching fluxes from forest soils is presented and tested in three Dutch forest monitoring plots. In this method sampling locations and times (days) are selected by probability sampling. Sampling locations were selected by

Crown condition assessment at the CONECOFOR Permanent Monitoring Plots

Directory of Open Access Journals (Sweden)

Renzo NIBBI

2002-09-01

Full Text Available A detailed crown condition assessment is currently being carried out at the CONECOFOR (CONtrollo ECOsistemi FORestali, Control of Forest Ecosystems plots. The assessment began in 1996, and during the first two years (1996 and 1997 an assessment form based on previous regional experience was used; in 1998 the new official EU form was adopted. The resulting loss of comparability means that only a few indices can be used in the temporal series 1996-1999. Much effort was devoted to Quality Assurance (QA procedures. The QA program is structured as follows: (i specific field manuals have been adopted and are continuously updated; (ii a national training and intercalibration course (NT&IC is undertaken yearly before beginning the assessment campaign;( iii field checks are carried out yearly on a large number of plots. The results of the QA program have shown that for several indices the quality objectives were not reached, but the quality of the data is improving with time. To express the change in crown conditions in each area, a complex index (CCI = Crown Condition Index was adopted. This index is the result of the sum of the relativized values of all the common indices used during the four years. The following parameters were used: transparency, ramification type, leaf colour alteration extension, leaf damage extension, alteration of leaf distension extension. The range within which the CCI fluctuates was evaluated taking into account all the observations carried out at a given plot throughout the years. The number of cases over a given threshold (outliers was calculated for each year. The threshold for outliers was calculated as the median value plus 2 times the range of the interquartile value. All individual cases exceeding this value are considered outliers. The results are presented for all the areas in which the data set is complete for the four years. The yearly fluctuations are discussed and related to possible causes.

Generalized Probability-Probability Plots

NARCIS (Netherlands)

Mushkudiani, N.A.; Einmahl, J.H.J.

2004-01-01

We introduce generalized Probability-Probability (P-P) plots in order to study the one-sample goodness-of-fit problem and the two-sample problem, for real valued data.These plots, that are constructed by indexing with the class of closed intervals, globally preserve the properties of classical P-P

Nonlinear Dot Plots.

Science.gov (United States)

Rodrigues, Nils; Weiskopf, Daniel

2018-01-01

Conventional dot plots use a constant dot size and are typically applied to show the frequency distribution of small data sets. Unfortunately, they are not designed for a high dynamic range of frequencies. We address this problem by introducing nonlinear dot plots. Adopting the idea of nonlinear scaling from logarithmic bar charts, our plots allow for dots of varying size so that columns with a large number of samples are reduced in height. For the construction of these diagrams, we introduce an efficient two-way sweep algorithm that leads to a dense and symmetrical layout. We compensate aliasing artifacts at high dot densities by a specifically designed low-pass filtering method. Examples of nonlinear dot plots are compared to conventional dot plots as well as linear and logarithmic histograms. Finally, we include feedback from an expert review.

Visual search for tropical web spiders: the influence of plot length, sampling effort, and phase of the day on species richness.

Science.gov (United States)

Pinto-Leite, C M; Rocha, P L B

2012-12-01

Empirical studies using visual search methods to investigate spider communities were conducted with different sampling protocols, including a variety of plot sizes, sampling efforts, and diurnal periods for sampling. We sampled 11 plots ranging in size from 5 by 10 m to 5 by 60 m. In each plot, we computed the total number of species detected every 10 min during 1 hr during the daytime and during the nighttime (0630 hours to 1100 hours, both a.m. and p.m.). We measured the influence of time effort on the measurement of species richness by comparing the curves produced by sample-based rarefaction and species richness estimation (first-order jackknife). We used a general linear model with repeated measures to assess whether the phase of the day during which sampling occurred and the differences in the plot lengths influenced the number of species observed and the number of species estimated. To measure the differences in species composition between the phases of the day, we used a multiresponse permutation procedure and a graphical representation based on nonmetric multidimensional scaling. After 50 min of sampling, we noted a decreased rate of species accumulation and a tendency of the estimated richness curves to reach an asymptote. We did not detect an effect of plot size on the number of species sampled. However, differences in observed species richness and species composition were found between phases of the day. Based on these results, we propose guidelines for visual search for tropical web spiders.

Direct determination of lead in human urine and serum samples by electrothermal atomic absorption spectrometry and permanent modifiers

International Nuclear Information System (INIS)

Andrada, Daniel; Pinto, Frederico G.; Magalhaes, Cristina Goncalves; Nunes, Berta R.; Silva, Jose Bento Borba da; Franco, Milton B.

2006-01-01

The object of the present study was the development of alternative methods for the direct determination of lead in undigested samples of human urine and serum by electrothermal atomic absorption spectrometry (ETAAS). Thus, some substances have been investigated to act as chemical modifiers. Volumes of 20 μL of diluted samples, 1 + 1, v/v for urine and 1 + 4, v/v for serum, with HNO 3 1% v/v and 0.02% v/v of cetyl trimethyl ammonium chloride (CTAC) were prepared directly in the autosampler cups and placed into the graphite furnace. For modifiers in solutions 10 μL were used. Pyrolysis and atomization temperature curves were used in all optimizations in the matrixes diluted as exposed. For urine with permanent iridium (500 μg), the best pyrolysis and atomization temperatures were 900 and 1600 deg C, respectively, with a characteristic mass of 12 pg (recommended of 10 pg), with symmetrical absorption pulses and corrected background. Spiked urine samples presented recoveries between 86 and 112% for Ir permanent. The analysis results of certified urine samples are in agreement with certified values (95% of confidence) for two levels of the metal. For serum, good results were obtained with the mixture of Zr+Rh or Ir+Rh as permanent modifiers, with characteristic masses of 9.8 and 8.1 pg, respectively. Recoveries from spiked serum samples varied between 98.6 and 100.1% (Ir+Rh) and between 93.9 and 105.2% (Zr+Rh). In both recovery studies, the relative standard deviation (n=3) was lower than 7%. Calibration for both samples were made with aqueous calibration curves and presented r 2 higher than 0.99. The limits of detection were 0.7 μg L -1 for serum samples, with Zr+Rh permanent, and 1.0 μg L -1 for urine with iridium permanent. (author)

Direct determination of lead in human urine and serum samples by electrothermal atomic absorption spectrometry and permanent modifiers

Directory of Open Access Journals (Sweden)

Andrada Daniel

2006-01-01

Full Text Available The object of the present study was the development of alternative methods for the direct determination of lead in undigested samples of human urine and serum by electrothermal atomic absorption spectrometry (ET AAS. Thus, some substances have been investigated to act as chemical modifiers. Volumes of 20 µL of diluted samples, 1 + 1, v/v for urine and 1 + 4, v/v for serum, with HNO3 1% v/v and 0.02% v/v of cetil trimethyl ammonium chloride (CTAC were prepared directly in the autosampler cups and placed into the graphite furnace. For modifiers in solutions 10 µL were used. Pyrolysis and atomization temperature curves were used in all optimizations in the matrixes diluted as exposed. For urine with permanent iridium (500 µg, the best pyrolysis and atomization temperatures were 900 and 1600 ºC, respectively, with a characteristic mass of 12 pg (recommended of 10 pg, with symmetrical absorption pulses and corrected background. Spiked urine samples presented recoveries between 86 and 112% for Ir permanent. The analysis results of certified urine samples are in agreement with certified values (95% of confidence for two levels of the metal. For serum, good results were obtained with the mixture of Zr+Rh or Ir+Rh as permanent modifiers, with characteristic masses of 9.8 and 8.1 pg, respectively. Recoveries from spiked serum samples varied between 98.6 and 100.1% (Ir+Rh and between 93.9 and 105.2% (Zr+Rh. In both recovery studies, the relative standard deviation (n=3 was lower than 7%. Calibration for both samples were made with aqueous calibration curves and presented r² higher than 0.99. The limits of detection were 0.7 µg L-1 for serum samples, with Zr+Rh permanent, and 1.0 µg L-1 for urine with iridium permanent.

Contribution to the sample mean plot for graphical and numerical sensitivity analysis

International Nuclear Information System (INIS)

Bolado-Lavin, R.; Castaings, W.; Tarantola, S.

2009-01-01

The contribution to the sample mean plot, originally proposed by Sinclair, is revived and further developed as practical tool for global sensitivity analysis. The potentials of this simple and versatile graphical tool are discussed. Beyond the qualitative assessment provided by this approach, a statistical test is proposed for sensitivity analysis. A case study that simulates the transport of radionuclides through the geosphere from an underground disposal vault containing nuclear waste is considered as a benchmark. The new approach is tested against a very efficient sensitivity analysis method based on state dependent parameter meta-modelling

Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia

OpenAIRE

Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

2015-01-01

Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in se...

Managing data from remeasured plots: An evaluation of existing systems

Science.gov (United States)

John C. Byrne; Michael D. Sweet

1992-01-01

Proper management of the valuable data from remeasured (or permanent) forest growth plots with data base management systems (DBMS) can greatly add to their utility. Twelve desired features for such a system (activities that facilitate the storage, accuracy, and use of the data for analysis) are described and used to evaluate the 36 systems found by a survey conducted...

Bridging scale gaps between regional maps of forest aboveground biomass and field sampling plots using TanDEM-X data

Science.gov (United States)

Ni, W.; Zhang, Z.; Sun, G.

2017-12-01

Several large-scale maps of forest AGB have been released [1] [2] [3]. However, these existing global or regional datasets were only approximations based on combining land cover type and representative values instead of measurements of actual forest aboveground biomass or forest heights [4]. Rodríguez-Veiga et al[5] reported obvious discrepancies of existing forest biomass stock maps with in-situ observations in Mexico. One of the biggest challenges to the credibility of these maps comes from the scale gaps between the size of field sampling plots used to develop(or validate) estimation models and the pixel size of these maps and the availability of field sampling plots with sufficient size for the verification of these products [6]. It is time-consuming and labor-intensive to collect sufficient number of field sampling data over the plot size of the same as resolutions of regional maps. The smaller field sampling plots cannot fully represent the spatial heterogeneity of forest stands as shown in Figure 1. Forest AGB is directly determined by forest heights, diameter at breast height (DBH) of each tree, forest density and tree species. What measured in the field sampling are the geometrical characteristics of forest stands including the DBH, tree heights and forest densities. The LiDAR data is considered as the best dataset for the estimation of forest AGB. The main reason is that LiDAR can directly capture geometrical features of forest stands by its range detection capabilities.The remotely sensed dataset, which is capable of direct measurements of forest spatial structures, may serve as a ladder to bridge the scale gaps between the pixel size of regional maps of forest AGB and field sampling plots. Several researches report that TanDEM-X data can be used to characterize the forest spatial structures [7, 8]. In this study, the forest AGB map of northeast China were produced using ALOS/PALSAR data taking TanDEM-X data as a bridges. The TanDEM-X InSAR data used in

Sensitivity analysis using contribution to sample variance plot: Application to a water hammer model

International Nuclear Information System (INIS)

Tarantola, S.; Kopustinskas, V.; Bolado-Lavin, R.; Kaliatka, A.; Ušpuras, E.; Vaišnoras, M.

2012-01-01

This paper presents “contribution to sample variance plot”, a natural extension of the “contribution to the sample mean plot”, which is a graphical tool for global sensitivity analysis originally proposed by Sinclair. These graphical tools have a great potential to display graphically sensitivity information given a generic input sample and its related model realizations. The contribution to the sample variance can be obtained at no extra computational cost, i.e. from the same points used for deriving the contribution to the sample mean and/or scatter-plots. The proposed approach effectively instructs the analyst on how to achieve a targeted reduction of the variance, by operating on the extremes of the input parameters' ranges. The approach is tested against a known benchmark for sensitivity studies, the Ishigami test function, and a numerical model simulating the behaviour of a water hammer effect in a piping system.

BliP PLOT : PLOT DISTRIBUSI DATA BERDIMENSI - SATU

OpenAIRE

Anisa Anisa; Indwiati Indwiati

2014-01-01

Blip Plot, adalah salah satu plot yang sibuat untuk menampilkan data berdimensi-satu. Pada dasarnya plot ini terdiri dari kotak, garis, dan titik. Sebagaimana plot distribusi berdimensi-satu yang lain, BliP Plot menampilkan nilai-nilai data individu dalam titik-titik atau garis-garis, dan informasi berkelompok dalam garis atau kotak. Kelebihannya, Blip Plot menampilkan banyak keistimewaan baru seperti plot variable-widht dan beberapa pilihan pola titik. Keuntungan utama dari Blip ...

Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia.

Science.gov (United States)

Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

2015-02-19

Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in secondary dry deciduous forests. Measurements were made in 1998, 2000, 2004 and 2010, and logging, recruitment and mortality of each tree were recorded. We estimated phylogeny using rbcL and matK gene sequences and quantified phylogenetic α and β diversity. Within communities, logging decreased phylogenetic diversity, and increased overall phylogenetic clustering and terminal phylogenetic evenness. Between communities, logging increased phylogenetic similarity between evergreen and deciduous plots. On the other hand, recruitment had opposite effects both within and between communities. The observed patterns can be explained by environmental homogenization under logging. Logging is biased to particular species and larger diameter at breast height, and forest patrol has been effective in decreasing logging. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Normal probability plots with confidence.

Science.gov (United States)

Chantarangsi, Wanpen; Liu, Wei; Bretz, Frank; Kiatsupaibul, Seksan; Hayter, Anthony J; Wan, Fang

2015-01-01

Normal probability plots are widely used as a statistical tool for assessing whether an observed simple random sample is drawn from a normally distributed population. The users, however, have to judge subjectively, if no objective rule is provided, whether the plotted points fall close to a straight line. In this paper, we focus on how a normal probability plot can be augmented by intervals for all the points so that, if the population distribution is normal, then all the points should fall into the corresponding intervals simultaneously with probability 1-α. These simultaneous 1-α probability intervals provide therefore an objective mean to judge whether the plotted points fall close to the straight line: the plotted points fall close to the straight line if and only if all the points fall into the corresponding intervals. The powers of several normal probability plot based (graphical) tests and the most popular nongraphical Anderson-Darling and Shapiro-Wilk tests are compared by simulation. Based on this comparison, recommendations are given in Section 3 on which graphical tests should be used in what circumstances. An example is provided to illustrate the methods. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Effect of Plot Size on Some Pratylenchus Penetrans ...

African Journals Online (AJOL)

Pratylenchus penetrans counts obtained from a rose field, sampled sequentially by decreasing the plot sizes were computed to obtain the respective sample means, variance and k-value of the negative binomial distribution. Plots 21 m x 80 m, 3.6 m x 3.6 m and 0.6 m x 0.6 m were sampled for the nematode. It is reported ...

[Eugenics, an element of the literary plots of dystopia].

Science.gov (United States)

Baum, Ewa; Musielak, Michał

2007-01-01

The work presents the ideas and assumptions of eugenics, a social philosophy established in 1883 by Francis Galton, which affected the social policies of numerous European countries in the first half of the 20th century. The work shows the effect of eugenics on the literary standards of European prose in the previous century. Two outstanding dystopian novels of the 20th century, The Brave New World by Aldous Huxley and 1984 by George Orwell, situate eugenics as a permanent element of the literary plot of dystopia. Apart from the typical features of this type of novel, for example: personal narration with a trace of irony, a totalitarian state and Newspeak, eugenics is an important element of the literary plot with is aim to exclude and marginalise certain social groups. Eugenics is also one of the main social ideas criticised by both the writers.

Standardized mean differences cause funnel plot distortion in publication bias assessments.

Science.gov (United States)

Zwetsloot, Peter-Paul; Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris Ah; Chamuleau, Steven Aj; MacLeod, Malcolm R; Wever, Kimberley E

2017-09-08

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results.

Considerations in Forest Growth Estimation Between Two Measurements of Mapped Forest Inventory Plots

Science.gov (United States)

Michael T. Thompson

2006-01-01

Several aspects of the enhanced Forest Inventory and Analysis (FIA) program?s national plot design complicate change estimation. The design incorporates up to three separate plot sizes (microplot, subplot, and macroplot) to sample trees of different sizes. Because multiple plot sizes are involved, change estimators designed for polyareal plot sampling, such as those...

Towards the harmonization between National Forest Inventory and Forest Condition Monitoring. Consistency of plot allocation and effect of tree selection methods on sample statistics in Italy.

Science.gov (United States)

Gasparini, Patrizia; Di Cosmo, Lucio; Cenni, Enrico; Pompei, Enrico; Ferretti, Marco

2013-07-01

In the frame of a process aiming at harmonizing National Forest Inventory (NFI) and ICP Forests Level I Forest Condition Monitoring (FCM) in Italy, we investigated (a) the long-term consistency between FCM sample points (a subsample of the first NFI, 1985, NFI_1) and recent forest area estimates (after the second NFI, 2005, NFI_2) and (b) the effect of tree selection method (tree-based or plot-based) on sample composition and defoliation statistics. The two investigations were carried out on 261 and 252 FCM sites, respectively. Results show that some individual forest categories (larch and stone pine, Norway spruce, other coniferous, beech, temperate oaks and cork oak forests) are over-represented and others (hornbeam and hophornbeam, other deciduous broadleaved and holm oak forests) are under-represented in the FCM sample. This is probably due to a change in forest cover, which has increased by 1,559,200 ha from 1985 to 2005. In case of shift from a tree-based to a plot-based selection method, 3,130 (46.7%) of the original 6,703 sample trees will be abandoned, and 1,473 new trees will be selected. The balance between exclusion of former sample trees and inclusion of new ones will be particularly unfavourable for conifers (with only 16.4% of excluded trees replaced by new ones) and less for deciduous broadleaves (with 63.5% of excluded trees replaced). The total number of tree species surveyed will not be impacted, while the number of trees per species will, and the resulting (plot-based) sample composition will have a much larger frequency of deciduous broadleaved trees. The newly selected trees have-in general-smaller diameter at breast height (DBH) and defoliation scores. Given the larger rate of turnover, the deciduous broadleaved part of the sample will be more impacted. Our results suggest that both a revision of FCM network to account for forest area change and a plot-based approach to permit statistical inference and avoid bias in the tree sample

A foundation of ecology rediscovered: 100 years of succession on the William S. Cooper plots in Glacier Bay, Alaska.

Science.gov (United States)

Buma, Brian; Bisbing, Sarah; Krapek, John; Wright, Glenn

2017-06-01

Understanding plant community succession is one of the original pursuits of ecology, forming some of the earliest theoretical frameworks in the field. Much of this was built on the long-term research of William S. Cooper, who established a permanent plot network in Glacier Bay, Alaska, in 1916. This study now represents the longest-running primary succession plot network in the world. Permanent plots are useful for their ability to follow mechanistic change through time without assumptions inherent in space-for-time (chronosequence) designs. After 100-yr, these plots show surprising variety in species composition, soil characteristics (carbon, nitrogen, depth), and percent cover, attributable to variation in initial vegetation establishment first noted by Cooper in the 1916-1923 time period, partially driven by dispersal limitations. There has been almost a complete community composition replacement over the century and general species richness increase, but the effective number of species has declined significantly due to dominance of Salix species which established 100-yr prior (the only remaining species from the original cohort). Where Salix dominates, there is no establishment of "later" successional species like Picea. Plots nearer the entrance to Glacier Bay, and thus closer to potential seed sources after the most recent glaciation, have had consistently higher species richness for 100 yr. Age of plots is the best predictor of soil N content and C:N ratio, though plots still dominated by Salix had lower overall N; soil accumulation was more associated with dominant species. This highlights the importance of contingency and dispersal in community development. The 100-yr record of these plots, including species composition, spatial relationships, cover, and observed interactions between species provides a powerful view of long-term primary succession. © 2017 by the Ecological Society of America.

Polar plot representation of time-resolved fluorescence.

Science.gov (United States)

Eichorst, John Paul; Wen Teng, Kai; Clegg, Robert M

2014-01-01

Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

Plano amostral em parcelas de milho para avaliação de atributos de espigas Sampling plan in corn plots to evaluate ear characteristics

Directory of Open Access Journals (Sweden)

Thomas Newton Martin

2005-12-01

Full Text Available Em experimentos agrícolas, a amostragem é importante para reduzir os custos e a mão-de-obra, embora devam possuir características que confiram precisão experimental adequada. O objetivo do trabalho foi determinar uma metodologia para se amostrar parcelas e sub-parcelas experimentais de milho, quando o objetivo é avaliar atributos morfológicos e de rendimento avaliados nas espigas. O experimento foi realizado, no Departamento de Fitotecnia da Universidade Federal de Santa Maria, com quatro bases genéticas de milho (híbrido simples - DAS 9560; híbrido duplo - AG 303; híbrido triplo - AG 6018; variedade cultivada - BR 202. O delineamento usado foi blocos completos casualizados com quatro repetições. A parcela foi constituída de 96 sub-parcelas de um metro. Em cada parcela, amostraram-se as espigas de cinco sub-parcelas. Foram avaliados o comprimento, o diâmetro, o rendimento de grãos e a massa de cem grãos de cada espiga. Concluiu-se que o tamanho da amostra nas parcelas de milho está relacionado ao atributo a ser avaliado nas espigas. Existem interferências genéticas e ambientais sobre a magnitude da estimativa do tamanho da amostra de espigas de milho. Pode-se amostrar 24 espigas por parcela, em seis repetições por genótipo, para avaliar os atributos comprimento e largura de espigas, rendimento de grãos e massa de cem grãos, para obter uma semi-amplitude do intervalo de confiança abaixo de 10% da média.In agricultural experiments good sampling techniques are important to reduce costs and labor, and guarantee adequate experimental precision. The objective of this research was to study a sampling methodology of experimental plots to evaluate morphologic characteristic and corn yield in maize spikes. Single (DAS 9560, double (AG 6018 and triple (AG 303 crosses corn hybrids and an open pollinated variety (BR 202 were ev aluated. The experiment design was a randomized complete block with four replications and was conducted

Multiple plots in R

DEFF Research Database (Denmark)

Edwards, Stefan McKinnon

2012-01-01

In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...

ABCASH plotting program users guide

International Nuclear Information System (INIS)

Troyer, G.L.

1995-01-01

The Automated Bar Coding of Air Samples at Hanford (ABCASH) system provides an integrated data collection, sample tracking, and data reporting system for radioactive particulate air filter samples. The ABCASH plotting program provides a graphical trend report for ABCASH of the performance of air sample results. This document provides an operational guide for using the program. Based on sample location identifier and date range, a trend chart of the available data is generated. The trend chart shows radiological activity versus time. General indications of directional trend of the concentrations in air over time may be discerned. Comparison limit set point values are also shown as derived from the ABCASH data base

SEGY to ASCII Conversion and Plotting Program 2.0

Science.gov (United States)

Goldman, Mark R.

2005-01-01

INTRODUCTION SEGY has long been a standard format for storing seismic data and header information. Almost every seismic processing package can read and write seismic data in SEGY format. In the data processing world, however, ASCII format is the 'universal' standard format. Very few general-purpose plotting or computation programs will accept data in SEGY format. The software presented in this report, referred to as SEGY to ASCII (SAC), converts seismic data written in SEGY format (Barry et al., 1975) to an ASCII data file, and then creates a postscript file of the seismic data using a general plotting package (GMT, Wessel and Smith, 1995). The resulting postscript file may be plotted by any standard postscript plotting program. There are two versions of SAC: one version for plotting a SEGY file that contains a single gather, such as a stacked CDP or migrated section, and a second version for plotting multiple gathers from a SEGY file containing more than one gather, such as a collection of shot gathers. Note that if a SEGY file has multiple gathers, then each gather must have the same number of traces per gather, and each trace must have the same sample interval and number of samples per trace. SAC will read several common standards of SEGY data, including SEGY files with sample values written in either IBM or IEEE floating-point format. In addition, utility programs are present to convert non-standard Seismic Unix (.sux) SEGY files and PASSCAL (.rsy) SEGY files to standard SEGY files. SAC allows complete user control over all plotting parameters including label size and font, tick mark intervals, trace scaling, and the inclusion of a title and descriptive text. SAC shell scripts create a postscript image of the seismic data in vector rather than bitmap format, using GMT's pswiggle command. Although this can produce a very large postscript file, the image quality is generally superior to that of a bitmap image, and commercial programs such as Adobe Illustrator

Product plots.

Science.gov (United States)

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

Effects of plot size on forest-type algorithm accuracy

Science.gov (United States)

James A. Westfall

2009-01-01

The Forest Inventory and Analysis (FIA) program utilizes an algorithm to consistently determine the forest type for forested conditions on sample plots. Forest type is determined from tree size and species information. Thus, the accuracy of results is often dependent on the number of trees present, which is highly correlated with plot area. This research examines the...

Armature reaction of permanent magnet-excited small dc motors with shell type magnets and possibilities of power increase

Energy Technology Data Exchange (ETDEWEB)

Gutt, H J; Tran, Q N

1983-07-01

Permanent magnet-excited small dc motors allow an increase of power up to 30% compared with present permanent excited motors. The calculation of immediate irreversible demagnetization of the air-gap situated shell type magnets is necessary for a good motor design. Numerical calculated field line plots show the critical zones of the irreversible demagnetization at high armature reaction and refer how to avoid the flux loss and to increase the motor power.

Plot 3

DEFF Research Database (Denmark)

Lund, Inger-Lise; Gjessing, Susanne; Hermansen, Anne-Mette

Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning.......Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning....

Genome U-Plot: a whole genome visualization.

Science.gov (United States)

Gaitatzes, Athanasios; Johnson, Sarah H; Smadbeck, James B; Vasmatzis, George

2018-05-15

The ability to produce and analyze whole genome sequencing (WGS) data from samples with structural variations (SV) generated the need to visualize such abnormalities in simplified plots. Conventional two-dimensional representations of WGS data frequently use either circular or linear layouts. There are several diverse advantages regarding both these representations, but their major disadvantage is that they do not use the two-dimensional space very efficiently. We propose a layout, termed the Genome U-Plot, which spreads the chromosomes on a two-dimensional surface and essentially quadruples the spatial resolution. We present the Genome U-Plot for producing clear and intuitive graphs that allows researchers to generate novel insights and hypotheses by visualizing SVs such as deletions, amplifications, and chromoanagenesis events. The main features of the Genome U-Plot are its layered layout, its high spatial resolution and its improved aesthetic qualities. We compare conventional visualization schemas with the Genome U-Plot using visualization metrics such as number of line crossings and crossing angle resolution measures. Based on our metrics, we improve the readability of the resulting graph by at least 2-fold, making apparent important features and making it easy to identify important genomic changes. A whole genome visualization tool with high spatial resolution and improved aesthetic qualities. An implementation and documentation of the Genome U-Plot is publicly available at https://github.com/gaitat/GenomeUPlot. vasmatzis.george@mayo.edu. Supplementary data are available at Bioinformatics online.

The Half-Half Plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.

2009-01-01

The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatter plot. The plot displays jumps clearly and reveals further

THE QUANTITY AND TURNOVER OF DEAD WOOD IN PERMANENT FOREST PLOTS IN SIX LIFE ZONES OF VENEZUELA

Science.gov (United States)

Dead wood can be an important component of the carbon pool in many forests, but few measurements have been made of this pool in tropical forests. To fill this gap, we determined the quantity of dead wood (downed and standing dead) in 25 long-term (up to 30 yr) permanent forest pl...

Avoiding treatment bias of REDD+ monitoring by sampling with partial replacement

Science.gov (United States)

Michael Kohl; Charles T Scott; Andrew J Lister; Inez Demon; Daniel. Plugge

2015-01-01

Implementing REDD+ renders the development of a measurement, reporting and verification (MRV) system necessary to monitor carbon stock changes. MRV systems generally apply a combination of remote sensing techniques and in-situ field assessments. In-situ assessments can be based on 1) permanent plots, which are assessed on all successive occasions, 2) temporary plots,...

Trellis plots as visual aids for analyzing split plot experiments

DEFF Research Database (Denmark)

Kulahci, Murat; Menon, Anil

2017-01-01

The analysis of split plot experiments can be challenging due to a complicated error structure resulting from restrictions on complete randomization. Similarly, standard visualization methods do not provide the insight practitioners desire to understand the data, think of explanations, generate...... hypotheses, build models, or decide on next steps. This article demonstrates the effective use of trellis plots in the preliminary data analysis for split plot experiments to address this problem. Trellis displays help to visualize multivariate data by allowing for conditioning in a general way. They can...

Object permanence in adults : a cross-cultural perspective

OpenAIRE

Subbotski, Eugene; Trommsdorff, Gisela

1992-01-01

Soviet and German adult subjects observed the phenomenon of object non-permanence (destruction, reconstruction, or transformation of a physical object). Both samples attributed an equal degree of probability to real existence of object non-permanence. However, Soviet subjects attributed a significantly higher probability to the existence of "religion-independent" non-permanent mysterious phenomena, (e.g., "unidentified flying objects", "abominable snowman", "Loch Ness monster") while attribut...

[Comparative quality measurements part 3: funnel plots].

Science.gov (United States)

Kottner, Jan; Lahmann, Nils

2014-02-01

Comparative quality measurements between organisations or institutions are common. Quality measures need to be standardised and risk adjusted. Random error must also be taken adequately into account. Rankings without consideration of the precision lead to flawed interpretations and enhances "gaming". Application of confidence intervals is one possibility to take chance variation into account. Funnel plots are modified control charts based on Statistical Process Control (SPC) theory. The quality measures are plotted against their sample size. Warning and control limits that are 2 or 3 standard deviations from the center line are added. With increasing group size the precision increases and so the control limits are forming a funnel. Data points within the control limits are considered to show common cause variation; data points outside special cause variation without the focus of spurious rankings. Funnel plots offer data based information about how to evaluate institutional performance within quality management contexts.

137Cs profiles in erosion plots with different soil cultivation

International Nuclear Information System (INIS)

Andrello, A.C.; Appoloni, C.R.; Cassol, E.A.; Melquiades, F.L.

2006-01-01

Cesium-137 methodology has been successfully used to assess soil erosion. Seven erosion plots were sampled to determine the 137 Cs profile and to assess the erosion rates. Cesium-137 profile for native pasture plot showed an exponential decline below 5 cm depth, with little 137 Cs activity in the superficial layer (0-5 cm). Cesium-137 profile for wheat-soybean rotation plot in conventional tillage showed a uniform distribution with depth. For this plot, the soil loss occurs more in middle than upper and lower level. Cesium-137 profile for wheat-soybean rotation and wheat-maize rotation plots in no-tillage showed a similar result to the native pasture, with a minimum soil loss in the superficial layer. Cesium-137 profile for bare soil and cultivated pasture plots are similar, with a soil erosion rate of 229 t ha -1 year -1 . In the plots with a conventional tillage a greater soil loss occur in middle than upper and lower level. In no-tillage cultivation plots occurs soil loss in lower level, but no sign of soil loss neither gain in the upper level is observed. Cesium-137 methodology is a good tool to assess soil erosion and the 137 Cs profile gives a possibility to understand the soil erosion behavior in erosion plots. (author)

The half-half plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.

2012-01-01

The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatterplot. The plot displays jumps clearly and reveals further

Plasma physics plotting package

International Nuclear Information System (INIS)

Hyman, D.H.

1981-02-01

We describe a package of plotting routines that do up to six two- or three-dimensional plots on a frame with minimal loss of resolution. The package now runs on a PDP-10 with PLOT-10 TCS primitives and on a Control Data Corporation-7600 and a Cray-1 with TV80LIB primitives on the National Magnetic Fusion Energy Computer Center network. The package is portable to other graphics systems because only the primitive plot calls are used from the underlying system's graphics package

MatrixPlot: visualizing sequence constraints

DEFF Research Database (Denmark)

Gorodkin, Jan; Stærfeldt, Hans Henrik; Lund, Ole

1999-01-01

MatrixPlot: visualizing sequence constraints. Sub-title Abstract Summary : MatrixPlot is a program for making high-quality matrix plots, such as mutual information plots of sequence alignments and distance matrices of sequences with known three-dimensional coordinates. The user can add information...

Distributed plot-making

DEFF Research Database (Denmark)

Jensen, Lotte Groth; Bossen, Claus

2016-01-01

different socio-technical systems (paper-based and electronic patient records). Drawing on the theory of distributed cognition and narrative theory, primarily inspired by the work done within health care by Cheryl Mattingly, we propose that the creation of overview may be conceptualised as ‘distributed plot......-making’. Distributed cognition focuses on the role of artefacts, humans and their interaction in information processing, while narrative theory focuses on how humans create narratives through the plot construction. Hence, the concept of distributed plot-making highlights the distribution of information processing...

Confidence limits for contribution plots in multivariate statistical process control using bootstrap estimates.

Science.gov (United States)

Babamoradi, Hamid; van den Berg, Frans; Rinnan, Åsmund

2016-02-18

In Multivariate Statistical Process Control, when a fault is expected or detected in the process, contribution plots are essential for operators and optimization engineers in identifying those process variables that were affected by or might be the cause of the fault. The traditional way of interpreting a contribution plot is to examine the largest contributing process variables as the most probable faulty ones. This might result in false readings purely due to the differences in natural variation, measurement uncertainties, etc. It is more reasonable to compare variable contributions for new process runs with historical results achieved under Normal Operating Conditions, where confidence limits for contribution plots estimated from training data are used to judge new production runs. Asymptotic methods cannot provide confidence limits for contribution plots, leaving re-sampling methods as the only option. We suggest bootstrap re-sampling to build confidence limits for all contribution plots in online PCA-based MSPC. The new strategy to estimate CLs is compared to the previously reported CLs for contribution plots. An industrial batch process dataset was used to illustrate the concepts. Copyright © 2016 Elsevier B.V. All rights reserved.

NPLOT - NASTRAN PLOT

Science.gov (United States)

Mcentire, K.

1994-01-01

NPLOT is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models (FEMs). Although there are many commercial codes already available for plotting FEMs, these have limited use due to their cost, speed, and lack of features to view BAR elements. NPLOT was specifically developed to overcome these limitations. On a vector type graphics device the two best ways to show depth are by hidden line plotting or haloed line plotting. A hidden line algorithm generates views of models with all hidden lines removed, and a haloed line algorithm displays views with aft lines broken in order to show depth while keeping the entire model visible. A haloed line algorithm is especially useful for plotting models composed of many line elements and few surface elements. The most important feature of NPLOT is its ability to create both hidden line and haloed line views accurately and much more quickly than with any other existing hidden or haloed line algorithms. NPLOT is also capable of plotting a normal wire frame view to display all lines of a model. NPLOT is able to aid in viewing all elements, but it has special features not generally available for plotting BAR elements. These features include plotting of TRUE LENGTH and NORMALIZED offset vectors and orientation vectors. Standard display operations such as rotation and perspective are possible, but different view planes such as X-Y, Y-Z, and X-Z may also be selected. Another display option is the Z-axis cut which allows a portion of the fore part of the model to be cut away to reveal details of the inside of the model. A zoom function is available to terminals with a locator (graphics cursor, joystick, etc.). The user interface of NPLOT is designed to make the program quick and easy to use. A combination of menus and commands with help menus for detailed information about each command allows experienced users greater speed and efficiency. Once a plot is on the screen the interface

EcoIS: An image serialization library for plot-based plant flowering phenology

DEFF Research Database (Denmark)

Granados, Joel A.; Bonnet, Philippe; Hansen, Lars Hostrup

2013-01-01

they are produced by introducing an open source Python (www.python.org) library called EcoIS that creates image series from unaligned pictures of specially equipped plots. We use EcoIS to sample flowering phenology plots in a high arctic environment and create image series that later generate phenophase counts...

Validity of the t-plot method to assess microporosity in hierarchical micro/mesoporous materials.

Science.gov (United States)

Galarneau, Anne; Villemot, François; Rodriguez, Jeremy; Fajula, François; Coasne, Benoit

2014-11-11

The t-plot method is a well-known technique which allows determining the micro- and/or mesoporous volumes and the specific surface area of a sample by comparison with a reference adsorption isotherm of a nonporous material having the same surface chemistry. In this paper, the validity of the t-plot method is discussed in the case of hierarchical porous materials exhibiting both micro- and mesoporosities. Different hierarchical zeolites with MCM-41 type ordered mesoporosity are prepared using pseudomorphic transformation. For comparison, we also consider simple mechanical mixtures of microporous and mesoporous materials. We first show an intrinsic failure of the t-plot method; this method does not describe the fact that, for a given surface chemistry and pressure, the thickness of the film adsorbed in micropores or small mesopores (plot method to estimate the micro- and mesoporous volumes of hierarchical samples is then discussed, and an abacus is given to correct the underestimated microporous volume by the t-plot method.

The hexagon/panel system for selecting FIA plots under an annual inventory

Science.gov (United States)

Gary J. Brand; Mark D. Nelson; Daniel G. Wendt; Kevin K. Nimerfro

2000-01-01

Forest Inventory and Analysis (FIA) is changing to an annual nationwide forest inventory. This paper describes the sampling grid used to distribute FIA plots across the landscape and to allocate them to a particular measurement year. We also describe the integration of the F1A and Forest Health Monitoring (FHM) plot networks.

Variability of Measured Runoff and Soil Loss from Field Plots

Directory of Open Access Journals (Sweden)

F. Asadzadeh

2016-02-01

storm basis using the collection tanks. The collected runoff from each plot was then mixed thoroughly and a sample was taken for determining sediment concentration by weight. The per-storm soil loss was then obtained. Results and Discussion: A wide range of rainfall characteristics were observed during the study period.The results indicated that the maximum amount of coefficients of variation (CVs for runoff and soil loss from replicated plots were 60 and 80 percent, respectively, which were considerably higher than the variability of soil characteristics from these plots. CV of runoff and soil loss data among the replicates decreased as a power function of mean runoff (R2= 0.661, P

Surveillance of Site A and Plot M

International Nuclear Information System (INIS)

Golchert, N.W.

1991-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1990 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to determine the migration pathway of water from the burial ground (plot M) to the hand-pumped picnic wells, establish if buries radionuclides other than hydrogen-3 have migrated, and generally characterize the radiological environment of the area. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continues to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site or those living in the vicinity. 20 refs., 7 figs., 15 tabs

Splatterplots: overcoming overdraw in scatter plots.

Science.gov (United States)

Mayorga, Adrian; Gleicher, Michael

2013-09-01

We introduce Splatterplots, a novel presentation of scattered data that enables visualizations that scale beyond standard scatter plots. Traditional scatter plots suffer from overdraw (overlapping glyphs) as the number of points per unit area increases. Overdraw obscures outliers, hides data distributions, and makes the relationship among subgroups of the data difficult to discern. To address these issues, Splatterplots abstract away information such that the density of data shown in any unit of screen space is bounded, while allowing continuous zoom to reveal abstracted details. Abstraction automatically groups dense data points into contours and samples remaining points. We combine techniques for abstraction with perceptually based color blending to reveal the relationship between data subgroups. The resulting visualizations represent the dense regions of each subgroup of the data set as smooth closed shapes and show representative outliers explicitly. We present techniques that leverage the GPU for Splatterplot computation and rendering, enabling interaction with massive data sets. We show how Splatterplots can be an effective alternative to traditional methods of displaying scatter data communicating data trends, outliers, and data set relationships much like traditional scatter plots, but scaling to data sets of higher density and up to millions of points on the screen.

Optimizing variable radius plot size and LiDAR resolution to model standing volume in conifer forests

Science.gov (United States)

Ram Kumar Deo; Robert E. Froese; Michael J. Falkowski; Andrew T. Hudak

2016-01-01

The conventional approach to LiDAR-based forest inventory modeling depends on field sample data from fixed-radius plots (FRP). Because FRP sampling is cost intensive, combining variable-radius plot (VRP) sampling and LiDAR data has the potential to improve inventory efficiency. The overarching goal of this study was to evaluate the integration of LiDAR and VRP data....

Density Distribution Sunflower Plots

Directory of Open Access Journals (Sweden)

William D. Dupont

2003-01-01

Full Text Available Density distribution sunflower plots are used to display high-density bivariate data. They are useful for data where a conventional scatter plot is difficult to read due to overstriking of the plot symbol. The x-y plane is subdivided into a lattice of regular hexagonal bins of width w specified by the user. The user also specifies the values of l, d, and k that affect the plot as follows. Individual observations are plotted when there are less than l observations per bin as in a conventional scatter plot. Each bin with from l to d observations contains a light sunflower. Other bins contain a dark sunflower. In a light sunflower each petal represents one observation. In a dark sunflower, each petal represents k observations. (A dark sunflower with p petals represents between /2-pk k and /2+pk k observations. The user can control the sizes and colors of the sunflowers. By selecting appropriate colors and sizes for the light and dark sunflowers, plots can be obtained that give both the overall sense of the data density distribution as well as the number of data points in any given region. The use of this graphic is illustrated with data from the Framingham Heart Study. A documented Stata program, called sunflower, is available to draw these graphs. It can be downloaded from the Statistical Software Components archive at http://ideas.repec.org/c/boc/bocode/s430201.html . (Journal of Statistical Software 2003; 8 (3: 1-5. Posted at http://www.jstatsoft.org/index.php?vol=8 .

Difference and ratio plots

DEFF Research Database (Denmark)

Svendsen, Anders Jørgen; Holmskov, U; Bro, Peter

1995-01-01

and systemic lupus erythematosus from another previously published study (Macanovic, M. and Lachmann, P.J. (1979) Clin. Exp. Immunol. 38, 274) are also represented using ratio plots. Our observations indicate that analysis by regression analysis may often be misleading....... hitherto unnoted differences between controls and patients with either rheumatoid arthritis or systemic lupus erythematosus. For this we use simple, but unconventional, graphic representations of the data, based on difference plots and ratio plots. Differences between patients with Burkitt's lymphoma...

General Constraints on Sampling Wildlife on FIA Plots

Science.gov (United States)

Larissa L. Bailey; John R. Sauer; James D. Nichols; Paul H. Geissler

2005-01-01

This paper reviews the constraints to sampling wildlife populations at FIA points. Wildlife sampling programs must have well-defined goals and provide information adequate to meet those goals. Investigators should choose a State variable based on information needs and the spatial sampling scale. We discuss estimation-based methods for three State variables: species...

SinaPlot: an enhanced chart for simple and truthful representation of single observations over multiple classes

DEFF Research Database (Denmark)

Sidiropoulos, Nikos; Sohi, Sina Hadi; Pedersen, Thomas Lin

2017-01-01

the representation of data sets with differing sample size we have developed a new type of plot overcoming limitations of current standard visualization charts. SinaPlot is inspired by the strip chart and the violin plot and operates by letting the normalized density of points restrict the jitter along the x...

Isodose plotting for pen plotters

International Nuclear Information System (INIS)

Rosen, I.I.

1985-01-01

A general algorithm for treatment plan isodose line plotting is described which is particularly useful for pen plotters. Unlike other methods of plotting isodose lines, this algorithm is designed specifically to reduce pen motion, thereby reducing plotting time and wear on the transport mechanism. Points with the desired dose value are extracted from the dose matrix and stored, sorted into continuous contours, and then plotted. This algorithm has been implemented on DEC PDP-11/60 and VAX-11/780 computers for use with two models of Houston Instrument pen plotters, two models of Tektronix vector graphics terminals, a DEC VT125 raster graphics terminal, and a DEC VS11 color raster graphics terminal. Its execution time is similar to simpler direct-plotting methods

Status and trend of tree growth and mortality rate at the CONECOFOR plots, 1997-2004

Directory of Open Access Journals (Sweden)

Gianfranco Fabbio

2013-11-01

Full Text Available The circumference of trees in the CONECOFOR permanent monitoring plots (PMPs were measured by three surveys carried out in 1997, 2000 and 2005. Plots were arranged into forest types according to tree species, management system and stand structure: beech (Fagus sylvatica L. and spruce (Picea abies K. high forests, aged coppice forests and transitory crops (deciduous, evergreen oaks and beech. Diameter distribution, basal area, basal area increment, tree mortality rate and in-growth were calculated per layer (dominant, intermediate, dominated within each PMP, to point out relative contributions and changes. A range in relative annual growth was detected both within and between types over the monitored period, but an obvious reduction of annual increment was found in two/thirds of plots over 2000-04 as compared to 1997-99. Current mortality, mostly allocated into the dominated and intermediate layers, can be explained as “regular” due to overstocking and high inter-tree competition in almost all of the observed case-studies. Opposite patterns were found to occur as for stand growth vs. mortality rate between coppice forests and the other types owing to the different dynamics of tree competition in progress. Drought 2003 is the likely large-scale factor determining the reduced annual growth course over the second period.

Surveillance of Site A and Plot M

International Nuclear Information System (INIS)

Golchert, N.W.

1993-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1992 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) determine the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity

Impact of animal waste application on runoff water quality in field experimental plots.

Science.gov (United States)

Hill, Dagne D; Owens, William E; Tchoounwou, Paul B

2005-08-01

Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli) and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate) characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium. Bacteria numbers

Plotting system for the MINCS code

International Nuclear Information System (INIS)

Watanabe, Tadashi

1990-08-01

The plotting system for the MINCS code is described. The transient two-phase flow analysis code MINCS has been developed to provide a computational tool for analysing various two-phase flow phenomena in one-dimensional ducts. Two plotting systems, namely the SPLPLOT system and the SDPLOT system, can be used as the plotting functions. The SPLPLOT system is used for plotting time transients of variables, while the SDPLOT system is for spatial distributions. The SPLPLOT system is based on the SPLPACK system, which is used as a general tool for plotting results of transient analysis codes or experiments. The SDPLOT is based on the GPLP program, which is also regarded as one of the general plotting programs. In the SPLPLOT and the SDPLOT systems, the standardized data format called the SPL format is used in reading data to be plotted. The output data format of MINCS is translated into the SPL format by using the conversion system called the MINTOSPL system. In this report, how to use the plotting functions is described. (author)

IPLOT, interactive MELCOR data plotting system

International Nuclear Information System (INIS)

2008-01-01

1 - Description of program or function: IPLOT is an interactive MELCOR data plotting system. It provides several kinds of GUI interfaces for a flexible data plotting. IPLOT capabilities include creation, saving and loading of user specified MELCOR variables trend graphs. IPLOT can use one or several plot files for a graph generation while the graphs can be either in one window or in several windows. Besides IPLOT provides several graph convenient functions such as zooming, re-sizing, printing for a detail analysis of severe accidents. 2 - Methods: Trend values seeking in a plot file is performed by a binary search method for fast performance. 3 - Restrictions on the complexity of the problem: MELCOR plot files are required for plotting

Dental age estimation in Japanese individuals combining permanent teeth and third molars.

Science.gov (United States)

Ramanan, Namratha; Thevissen, Patrick; Fleuws, Steffen; Willems, G

2012-12-01

The study aim was, firstly, to verify the Willems et al. model on a Japanese reference sample. Secondly to develop a Japanese reference model based on the Willems et al. method and to verify it. Thirdly to analyze the age prediction performance adding tooth development information of third molars to permanent teeth. Retrospectively 1877 panoramic radiographs were selected in the age range between 1 and 23 years (1248 children, 629 sub-adults). Dental development was registered applying Demirjian 's stages of the mandibular left permanent teeth in children and Köhler stages on the third molars. The children's data were, firstly, used to validate the Willems et al. model (developed a Belgian reference sample), secondly, split ino a training and a test sample. On the training sample a Japanese reference model was developed based on the Willems method. The developed model and the Willems et al; model were verified on the test sample. Regression analysis was used to detect the age prediction performance adding third molar scores to permanent tooth scores. The validated Willems et al. model provided a mean absolute error of 0.85 and 0.75 years in females and males, respectively. The mean absolute error in the verified Willems et al. and the developed Japanese reference model was 0.85, 0.77 and 0.79, 0.75 years in females and males, respectively. On average a negligible change in root mean square error values was detected adding third molar scores to permanent teeth scores. The Belgian sample could be used as a reference model to estimate the age of the Japanese individuals. Combining information from the third molars and permanent teeth was not providing clinically significant improvement of age predictions based on permanent teeth information alone.

Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology.

Science.gov (United States)

Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

2015-08-01

When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literature: the 4-quadrant plot and the polar plot recently proposed by Critchley et al. The polar plot is thought to be the more advanced statistical tool, but care should be taken when it comes to its interpretation. The polar plot excludes possibly important measurements from the data. The polar plot transforms the data nonlinearily, which may prevent it from being seen clearly. In this article, we compare the 4-quadrant and the polar plot in detail and thoroughly describe advantages and limitations of each. We also discuss pitfalls concerning the methods to prepare the researcher for the sound use of both methods. Finally, we briefly revisit the Bland-Altman plot for the use in this context.

Superconducting permanent magnets

International Nuclear Information System (INIS)

Wipf, S.L.; Laquer, H.L.

1989-01-01

The concept of superconducting permanent magnets with fields trapped in shells or cylinders of Type II superconductors is an old one. Unfortunately, the low values of 0.5 to 1T for the first flux jump field, which is independent of the actual current density, have frustrated its implementation with classical Type II superconductors. The fact that the flux jump fields for high temperature superconductors should be an order of magnitude larger at liquid nitrogen temperatures allows us to reconsider these options. Analysis of the hysteresis patterns, based on the critical state model, shows that, if the dimensions are chosen so that the sample is penetrated at a field B/sub p/, which is equal to or just less than the first flux jump field, B/sub fj/, a temporarily applied field of 2B/sub fj/ will trap 0.5 B/sub fj/. Thus for a 90 K superconductor with a B/sub fj/ of 6T, a permanent field of 3 T should be trapped, with an energy product of 1.8 MJ/m/sup 3/ (225 MG . Oe). This is five times as large as for the best permanent magnet materials. The authors discuss means to verify the analysis and the limitations imposed by the low critical current densities in presently available high temperature superconductors

Multi-reader ROC studies with split-plot designs: a comparison of statistical methods.

Science.gov (United States)

Obuchowski, Nancy A; Gallas, Brandon D; Hillis, Stephen L

2012-12-01

Multireader imaging trials often use a factorial design, in which study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of this design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper, the authors compare three methods of analysis for the split-plot design. Three statistical methods are presented: the Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean analysis-of-variance approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power, and confidence interval coverage of the three test statistics. The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% confidence intervals falls close to the nominal coverage for small and large sample sizes. The split-plot multireader, multicase study design can be statistically efficient compared to the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rates, similar power, and nominal confidence interval coverage, are available for this study design. Copyright © 2012 AUR. All rights reserved.

Ozone exposure, defoliation of beech (Fagus sylvatica L.) and visible foliar symptoms on native plants in selected plots of South-Western Europe

International Nuclear Information System (INIS)

Ferretti, Marco; Calderisi, Marco; Bussotti, Filippo

2007-01-01

The relationships between crown defoliation of beech, visible foliar symptoms on native vegetation and ozone exposure were investigated on permanent monitoring sites in South-Western Europe in the years 2000-2002. Relationships between defoliation of beech and O 3 (seasonal mean, 2-week maximum, AOT40) were investigated by means of multiple regression models (11 plots, 1-3 years of data each) and a model based on temporal autocorrelation of defoliation data (14 plots, 1-3 years of data each). Different multiple regression techniques were used. The four models generated (R 2 = 0.71-0.85, explained variance in cross-validation 61-78%) identified several significant predictors of defoliation, with AOT40 (p = 0.008) and foliar content of phosphorous (p = 0.0002-0.0004) being common to all models. The autocorrelation model (R 2 = 0.55; p 35,000 ppbh). O 3 -like visible foliar symptoms were recorded on 65 species at 47% of the common monitoring sites in 2001 and 38% in 2002. No relationship was found between O 3 exposure, frequency of symptomatic sites and frequency of species with symptoms (R 2 = 0.11; p > 0.05). A number of questions related to the ecological and methodological basis of the survey were identified. Inherent sampling and non-sampling errors and multicollinearity of the data suggest great caution when examining results obtained from mensurational, correlative studies. - Ozone AOT40 was identified as a significant predictor of defoliation of beech, but a limited relationship was found between ozone exposure and visible symptoms on native vegetation

Impact of Animal Waste Application on Runoff Water Quality in Field Experimental Plots

Directory of Open Access Journals (Sweden)

Paul B. Tchounwou

2005-08-01

Full Text Available Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium

Testing aggregation hypotheses among Neotropical trees and shrubs: results from a 50-ha plot over 20 years of sampling.

Science.gov (United States)

Myster, Randall W; Malahy, Michael P

2012-09-01

Spatial patterns of tropical trees and shrubs are important to understanding their interaction and the resultant structure of tropical rainforests. To assess this issue, we took advantage of previously collected data, on Neotropical tree and shrub stem identified to species and mapped for spatial coordinates in a 50ha plot, with a frequency of every five years and over a 20 year period. These stems data were first placed into four groups, regardless of species, depending on their location in the vertical strata of the rainforest (shrubs, understory trees, mid-sized trees, tall trees) and then used to generate aggregation patterns for each sampling year. We found shrubs and understory trees clumped at small spatial scales of a few meters for several of the years sampled. Alternatively, mid-sized trees and tall trees did not clump, nor did they show uniform (regular) patterns, during any sampling period. In general (1) groups found higher in the canopy did not show aggregation on the ground and (2) the spatial patterns of all four groups showed similarity among different sampling years, thereby supporting a "shifting mosaic" view of plant communities over large areas. Spatial analysis, such as this one, are critical to understanding and predicting tree spaces, tree-tree replacements and the Neotropical forest patterns, such as biodiversity and those needed for sustainability efforts, they produce.

Fifth International Symposium on Recurrence Plot

CERN Document Server

Riley, Michael; Giuliani, Alessandro; Webber, Charles; Jr, Jr; Translational Recurrences : From Mathematical Theory to Real-World Applications

2014-01-01

This book features 13 papers presented at the Fifth International Symposium on Recurrence Plots, held August 2013 in Chicago, IL. It examines recent applications and developments in recurrence plots and recurrence quantifi cation analysis (RQA) with special emphasis on biological and cognitive systems and the analysis of coupled systems using cross-recurrence methods. Readers will discover new applications and insights into a range of systems provided by recurrence plot analysis and new theoretical and mathematical developments in recurrence plots. Recurrence plot based analysis is a powerful tool that operates on real-world complex systems that are nonlinear, non-stationary, noisy, of any statistical distribution, free of any particular model type, and not particularly long. Quantitative analyses promote the detection of system state changes, synchronized dynamical regimes, or classifi cation of system states. Th e book will be of interest to an interdisciplinary audience of recurrence plot users and researc...

A first look at measurement error on FIA plots using blind plots in the Pacific Northwest

Science.gov (United States)

Susanna Melson; David Azuma; Jeremy S. Fried

2002-01-01

Measurement error in the Forest Inventory and Analysis work of the Pacific Northwest Station was estimated with a recently implemented blind plot measurement protocol. A small subset of plots was revisited by a crew having limited knowledge of the first crew's measurements. This preliminary analysis of the first 18 months' blind plot data indicates that...

deltaPlotR: An R Package for Di?erential Item Functioning Analysis with Ango? s Delta Plot

OpenAIRE

David Magis; Bruno Facon

2014-01-01

Angoff's delta plot is a straightforward and not computationally intensive method to identify differential item functioning (DIF) among dichotomously scored items. This approach was recently improved by proposing an optimal threshold selection and by considering several item purification processes. Moreover, to support practical DIF analyses with the delta plot and these improvements, the R package deltaPlotR was also developed. The purpose of this paper is twofold: to outline the delta plot ...

On-Line 1D and 2D PLOT/LC-ESI-MS Using 10 μm i.d. Poly(styrene–divinylbenzene) Porous Layer Open Tubular (PLOT) Columns For Ultrasensitive Proteomic Analysis

Science.gov (United States)

Luo, Quanzhou; Yue, Guihua; Valaskovic, Gary A; Gu, Ye; Wu, Shiaw-Lin; Karger, Barry L.

2008-01-01

Following on our recent work, on-line one dimensional (1D) and two dimensional (2D) PLOT/LC-ESI-MS platforms using 3.2 m × 10 μm i.d. poly(styrenedivinylbenzene) (PS-DVB) porous layer open tubular (PLOT) columns have been developed to provide robust, high performance and ultrasensitive proteomic analysis. Using a PicoClear tee, the dead volume connection between a 50 μm i.d. PS-DVB monolithic microSPE column and the PLOT column was minimized. The microSPE/PLOT column assembly provided a separation performance similar to that obtained with direct injection onto the PLOT column at a mobile phase flow rate of 20 nL/min. The trace analysis potential of the platform was evaluated using an in-gel tryptic digest sample of a gel fraction (15 to 40 kDa) of a cervical cancer (SiHa) cell line. As an example of the sensitivity of the system, ∼2.5 ng of protein in 2 μL solution, an amount corresponding to 20 SiHa cells, was subjected to on-line microSPE-PLOT/LC-ESIMS/MS analysis using a linear ion trap MS. 237 peptides associated with 163 unique proteins were identified from a single analysis when using stringent criteria associated with a false positive rate less than 1% . The number of identified peptides and proteins increased to 638 and 343, respectively, as the injection amount was raised to ∼45 ng of protein, an amount corresponding to 350 SiHa cells. In comparison, only 338 peptides and 231 unique proteins were identified (false positive rate again less than 1%) from 750 ng of protein from the identical gel fraction, an amount corresponding to 6000 SiHa cells, using a typical 15 cm × 75 μm i.d. packed capillary column. The greater sensitivity, higher recovery, and higher resolving power of the PLOT column resulted in the increased number of identifications from only ∼5% of the injected sample amount. The resolving power of the microSPE/PLOT assembly was further extended by 2D chromatography via combination of the high-efficiency reversed phase PLOT column

The pros and cons of funnel plots as an aid to risk communication and patient decision making.

Science.gov (United States)

Rakow, Tim; Wright, Rebecca J; Spiegelhalter, David J; Bull, Catherine

2015-05-01

Funnel plots, which simultaneously display a sample statistic and the corresponding sample size for multiple cases, have a range of applications. In medicine, they are used to display treatment outcome rates and caseload volume by institution, which can inform strategic decisions about health care delivery. We investigated lay people's understanding of such plots and explored their suitability as an aid to individual treatment decisions. In two studies, 172 participants answered objective questions about funnel plots representing the surgical outcomes (survival or mortality rates) of institutions varying in caseload, and indicated their preferred institutions. Accuracy for extracting objective information was high, unless question phrasing was inconsistent with the plot's survival/mortality framing, or participants had low numeracy levels. Participants integrated caseload-volume and outcome-rate data when forming preferences, but were influenced by reference lines on the plot to make inappropriate discriminations between institutions with similar outcome rates. With careful choice of accompanying language, funnel plots can be readily understood and are therefore a useful tool for communicating risk. However, they are less effective as a decision aid for individual patient's treatment decisions, and we recommend refinements to the standard presentation of the plots if they are to be used for that purpose. © 2014 The British Psychological Society.

[Effect of comprehensive control and prevention for chronic disease in demonstration plot of Chongqing].

Science.gov (United States)

Qi, Li; Ding, Xian-bin; Mao, De-qiang; Feng, Lian-gui; Wang, Yu-lin; Jiao, Yan; Zhang, Chun-hua; Lü, Xiao-yan; Li, Hong; Xia, Yi-yin

2013-03-01

To evaluate the effect of comprehensive control and prevention for chronic diseases in demonstration plot of Chongqing. Residents were enrolled through multi-stage stratified random sampling method from 17 districts or counties which had successfully established demonstration plots and 21 districts or counties which had not established demonstration plots (non-demonstration plot for short) yet on May, 2012. Questionnaire was designed to survey awareness of health knowledge, health behaviors and utilization of health supportive tools. The results were analyzed by SPSS 15.0 software. We investigated 15 108 residents, 6156 of which were in demonstration plot and others (8951) were not. The findings revealed the percentage of the people who were aware the national action of health lifestyle in demonstration plot and in non-demonstration plot were 44.4% (2734/6157) and 40.2% (3598/8951), respectively, and the awareness of the hypertension risk of too much sodium were 72.4% (4458/6156) and 67.5% (6042/8951), respectively, and the awareness of the cardinal vascular disease (CVD) risk of obesity and overweight were 77.2% (4753/6157) and 69.6% (6230/8951), respectively. About the residents' health behaviors in demonstration plot and in non-demonstration plot, the utilization rates of salt restriction scoop or pot were 23.5% (1447/6157) and 17.9% (1602/8951), and the utilization rates of oil restriction pot were 16.7% (1028/6157) and 11.8% (1064/8951), respectively. Totally, 33 of the 37 indexes were shown higher in demonstration plot than that in non-demonstration plot (P plot was more effective, and the remarkable improvement of health knowledge and behaviors level had been achieved in demonstration plot.

Ozone exposure, defoliation of beech (Fagus sylvatica L.) and visible foliar symptoms on native plants in selected plots of South-Western Europe

Energy Technology Data Exchange (ETDEWEB)

Ferretti, Marco [Dipartimento di Biologia Vegetale, Universita di Firenze, Piazzale Cascine 28, I-50144 Florence (Italy)]. E-mail: m.ferretti@linnaea.it; Calderisi, Marco [Dipartimento di Biologia Vegetale, Universita di Firenze, Piazzale Cascine 28, I-50144 Florence (Italy)]. E-mail: calderisi@chemiometria.it; Bussotti, Filippo [Dipartimento di Biologia Vegetale, Universita di Firenze, Piazzale Cascine 28, I-50144 Florence (Italy)]. E-mail: filippo.bussotti@unifi.it

2007-02-15

The relationships between crown defoliation of beech, visible foliar symptoms on native vegetation and ozone exposure were investigated on permanent monitoring sites in South-Western Europe in the years 2000-2002. Relationships between defoliation of beech and O{sub 3} (seasonal mean, 2-week maximum, AOT40) were investigated by means of multiple regression models (11 plots, 1-3 years of data each) and a model based on temporal autocorrelation of defoliation data (14 plots, 1-3 years of data each). Different multiple regression techniques were used. The four models generated (R {sup 2} = 0.71-0.85, explained variance in cross-validation 61-78%) identified several significant predictors of defoliation, with AOT40 (p = 0.008) and foliar content of phosphorous (p = 0.0002-0.0004) being common to all models. The autocorrelation model (R {sup 2} = 0.55; p < 0.0001) was used to calculate expected defoliation on the basis of the previous year's defoliation, and model predictions were used as an estimate of expected defoliation under constant site and environmental condition. Residuals (predicted-measured) plotted against current AOT40 shows that a possible effect of ozone occurs only at very high AOT40 (>35,000 ppbh). O{sub 3}-like visible foliar symptoms were recorded on 65 species at 47% of the common monitoring sites in 2001 and 38% in 2002. No relationship was found between O{sub 3} exposure, frequency of symptomatic sites and frequency of species with symptoms (R {sup 2} = 0.11; p > 0.05). A number of questions related to the ecological and methodological basis of the survey were identified. Inherent sampling and non-sampling errors and multicollinearity of the data suggest great caution when examining results obtained from mensurational, correlative studies. - Ozone AOT40 was identified as a significant predictor of defoliation of beech, but a limited relationship was found between ozone exposure and visible symptoms on native vegetation.

A Comparison of Hazard Prediction and Assessment Capability (HPAC) Software Dose-Rate Contour Plots to a Sample of Local Fallout Data From Test Detonations in the Continental United States, 1945 - 1962

National Research Council Canada - National Science Library

Chancellor, Richard W

2005-01-01

A comparison of Hazard Prediction and Assessment Capability (HPAC) software dose-rate contour plots to a sample of local nuclear fallout data from test detonations in the continental United States, 1945 - 1962, is performed...

Assessment of errors associated with plot size and lateral movement of nitrogen-15 when studying fertilizer recovery under field conditions

International Nuclear Information System (INIS)

Sanchez, C.A.; Blackmer, A.M.; Horton, R.; Timmons, D.R.

1987-01-01

The high cost of 15 N-labeled fertilizers encourages the use of field plots having minimum size. If plot size is reduced too much, however, lateral movement of N near the plots by mass flow or diffusion within the soil or by translocation through plant roots can become a significant source of error in determinations of fertilizer N recovery. This study was initiated to assess the importance of lateral movement of labeled fertilizer when unconfined plots are used to determine recovery of fertilizer. Corn grain samples were collected at various positions inside and outside 15 N plots, and the 15 N contents of these samples were determined. The data were fit to mathematical models to estimate the extent to which lateral movement of fertilizer N caused errors in determined values of fertilizer recovery for the first, second, and third crops following fertilization. These models also were used to predict the plot size needed for similar 15 N-tracer studies in the future. The results of these studies indicate that 15 N plots having a size of 2 by 2 m are sufficiently large for determining recovery of fertilizer N for corn crops under most conditions. Where lateral movement of fertilizer N in soils is suspected to be a problem, we recommend collection of a few plant samples outside the 15 N plots as insurance against misleading conclusions concerning fertilizer N recovery

PLOT-3D, Graphics Subroutines for 3-D Surface Plots with Arbitrary Rotations

International Nuclear Information System (INIS)

Basinger, D.; Gvildys, J.

1975-01-01

1 - Description of problem or function: PLOT-3D is a package of sub- programs designed to draw three-dimensional surfaces from arrays of points (x,y,z). The surfaces can be drawn after arbitrary rotations about the three coordinate axes. 2 - Method of solution: PLOT-3D is a computer program to plot any surface for which each coordinate pair (x,y) is associated with a unique z in the set of points (x,y,z). It uses matrix transformation of the points to generate different views of the surface after arbitrary rotations about the three coordinate axes. Four versions of PLOT-3D are available. Output of version 1 and 3 is by film recorder. Output of version 2 and 4 is by CalComp plotter. Versions 3 and 4 do not draw lines which would be invisible to a viewer looking at an opaque surface, whereas versions 1 and 2 draw every line on the surface. 3 - Restrictions on the complexity of the problem: Versions 3 and 4 limit number of rows in arrays (x,y,z) to 100 and also number of columns in arrays (x,y,z) to 100

ULF-NMR system using HTS-SQUID and permanent magnet

Energy Technology Data Exchange (ETDEWEB)

Fukumoto, Shohei, E-mail: hatukade@ens.tut.ac.jp [Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku-cho, Toyohashi, Aichi 441-8580 (Japan); Tsunaki, Shingo; Chigasaki, Takumi; Hatsukade, Yoshimi; Tanaka, Saburo [Toyohashi University of Technology, 1-1 Hibarigaoka, Tempaku-cho, Toyohashi, Aichi 441-8580 (Japan)

2013-01-15

Highlights: ► A permanent magnet was introduced into a ULF SQUID-NMR system for polarization. ► An instrument to transfer a sample in the magnet to under a SQUID was implemented. ► An AC pulse coil was also introduced to apply a π/2 pulse to obtain an NMR signal. ► A {sup 1}H NMR signal was measured while applying a static field of 45 μT. ► The signal to noise ratio of the {sup 1}H NMR signal was about 100. -- Abstract: We have constructed an ultra-low field (ULF) nuclear magnetic resonance (NMR)/magnetic resonance imaging (MRI) system using an HTS-rf-SQUID and room-temperature electromagnets in a magnetically shielded room (MSR). In this study, in order to improve the signal to noise ratio (S/N) of the system, we introduced a permanent magnet instead of the electromagnet for pre-polarizing the sample to enhance the pre-polarizing field (B{sub p}). The cylindrical permanent magnet of 270 mT was used to magnetize a water sample for several seconds outside the MSR and about 1.5 m away from the SQUID. We constructed an instrument to transfer the magnetized sample from the permanent magnet to under the SQUID in 0.5 s. Since the non-adiabatic condition cannot be kept in such sample transfer scheme, an AC pulse coil to apply an AC pulse field B{sub AC} to rotate the magnetization moments for π/2 was introduced to measure a free induction decay (FID) signal from the sample. By this system, we obtained an NMR signal from the water sample of 10 ml while applying a static field of 45 μT and π/2 pulse after the transfer. The S/N of the NMR spectrum was about 100 by a single shot, which was 10 times larger than that obtained with the electromagnet of 32 mT. In addition, we demonstrated the measurements of the longitudinal relaxation time (T{sub 1}) and the spin echo signal of the water sample by the system.

The permanent process

DEFF Research Database (Denmark)

Møller, Jesper; McCullagh, Peter

We extend the boson process first to a large class of Cox processes and second an even larger class of infinitely divisible point processes. Density and moment results are studied in detail. These results are obtained in closed form as weighted permanents, so the extension is called a permanent...... process. Temporal extensions and a particularly tractable case of the permanent process are also studied. Extensions of the ferminon process along similar lines, leading to so-called determinant processes, are discussed at the end. While the permanent process is attractive, the determinant process...

Selecting the optimum plot size for a California design-based stream and wetland mapping program.

Science.gov (United States)

Lackey, Leila G; Stein, Eric D

2014-04-01

Accurate estimates of the extent and distribution of wetlands and streams are the foundation of wetland monitoring, management, restoration, and regulatory programs. Traditionally, these estimates have relied on comprehensive mapping. However, this approach is prohibitively resource-intensive over large areas, making it both impractical and statistically unreliable. Probabilistic (design-based) approaches to evaluating status and trends provide a more cost-effective alternative because, compared with comprehensive mapping, overall extent is inferred from mapping a statistically representative, randomly selected subset of the target area. In this type of design, the size of sample plots has a significant impact on program costs and on statistical precision and accuracy; however, no consensus exists on the appropriate plot size for remote monitoring of stream and wetland extent. This study utilized simulated sampling to assess the performance of four plot sizes (1, 4, 9, and 16 km(2)) for three geographic regions of California. Simulation results showed smaller plot sizes (1 and 4 km(2)) were most efficient for achieving desired levels of statistical accuracy and precision. However, larger plot sizes were more likely to contain rare and spatially limited wetland subtypes. Balancing these considerations led to selection of 4 km(2) for the California status and trends program.

Plot 5

DEFF Research Database (Denmark)

Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 5, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

Plot 4

DEFF Research Database (Denmark)

Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 4, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

Chromatographic properties PLOT multicapillary columns.

Science.gov (United States)

Nikolaeva, O A; Patrushev, Y V; Sidelnikov, V N

2017-03-10

Multicapillary columns (MCCs) for gas chromatography make it possible to perform high-speed analysis of the mixtures of gaseous and volatile substances at a relatively large amount of the loaded sample. The study was performed using PLOT MCCs for gas-solid chromatography (GSC) with different stationary phases (SP) based on alumina, silica and poly-(1-trimethylsilyl-1-propyne) (PTMSP) polymer as well as porous polymers divinylbenzene-styrene (DVB-St), divinylbenzene-vinylimidazole (DVB-VIm) and divinylbenzene-ethylene glycol dimethacrylate (DVB-EGD). These MCCs have the efficiency of 4000-10000 theoretical plates per meter (TP/m) and at a column length of 25-30cm can separate within 10-20s multicomponent mixtures of substances belonging to different classes of chemical compounds. The sample amount not overloading the column is 0.03-1μg and depends on the features of a porous layer. Examples of separations on some of the studied columns are considered. Copyright © 2017 Elsevier B.V. All rights reserved.

Partitioning of soil CO2 efflux in un-manipulated and experimentally flooded plots of a temperate fen

Science.gov (United States)

Wunderlich, S.; Borken, W.

2012-08-01

Peatlands store large amounts of organic carbon, but the carbon stock is sensitive to changes in precipitation or water table manipulations. Restoration of drained peatlands by drain blocking and flooding is a common measure to conserve and augment the carbon stock of peatland soils. Here, we report to what extent flooding affected the contribution of heterotrophic and rhizosphere respiration to soil CO2 efflux in a grass-dominated mountain fen in Germany. Soil CO2 efflux was measured in three un-manipulated control plots and three flooded plots in two consecutive years. Flooding was achieved by permanent irrigation during the growing seasons. Radiocarbon signatures of CO2 from different sources including soil CO2 efflux, incubated peat cores and live grass roots were repeatedly analyzed for partitioning of soil CO2 efflux. Additionally, heterotrophic respiration and its radiocarbon signature were determined by eliminating rhizosphere respiration in trenched subplots (only control). In the control plots, rhizosphere respiration determined by 14C signatures contributed between 47 and 61% during the growing season, but was small (4 ± 8%) immediately before budding. Trenching revealed a smaller rhizosphere contribution of 33 ± 8% (2009) and 22 ± 9% (2010) during growing seasons. Flooding reduced annual soil CO2 efflux of the fen by 42% in 2009 and by 30% in 2010. The reduction was smaller in 2010 mainly through naturally elevated water level in the control plots. A one-week interruption of irrigation caused a strong short-lived increase in soil CO2 efflux, demonstrating the sensitivity of the fen to water table drawdown near the peat surface. The reduction in soil CO2 efflux in the flooded plots diminished the relative proportion of rhizosphere respiration from 56 to 46%, suggesting that rhizosphere respiration was slightly more sensitive to flooding than heterotrophic respiration.

Representing uncertainty on model analysis plots

Directory of Open Access Journals (Sweden)

Trevor I. Smith

2016-09-01

Full Text Available Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model. Unfortunately, Bao’s original presentation of the model plot did not include a way to represent uncertainty in these measurements. I present details of a method to add error bars to model plots by expanding the work of Sommer and Lindell. I also provide a template for generating model plots with error bars.

Superconducting permanent magnets and their application in magnetic levitation

International Nuclear Information System (INIS)

Schultz, L.; Krabbes, G.; Fuchs, G.; Pfeiffer, W.; Mueller, K.H.

2002-01-01

Superconducting permanent magnets form a completely new class of permanent magnets. Of course, they must be cooled to 77 K or below. At very low temperatures (24 K) their magnetization can be a factor of 10 higher than that of the best conventional magnets, providing magnetic forces and energies which are up to two orders of magnitude higher. These new supermagnets became only recently available by the extreme improvement of the quality of melt-textured massive YBa 2 Cu 3 O x samples. Besides having a high magnetization, these superconducting permanent magnets can freeze in any given magnetic field configuration allowing completely new applications like superconducting transport systems or superconducting magnetic bearings. (orig.)

Looking at large data sets using binned data plots

Energy Technology Data Exchange (ETDEWEB)

Carr, D.B.

1990-04-01

This report addresses the monumental challenge of developing exploratory analysis methods for large data sets. The goals of the report are to increase awareness of large data sets problems and to contribute simple graphical methods that address some of the problems. The graphical methods focus on two- and three-dimensional data and common task such as finding outliers and tail structure, assessing central structure and comparing central structures. The methods handle large sample size problems through binning, incorporate information from statistical models and adapt image processing algorithms. Examples demonstrate the application of methods to a variety of publicly available large data sets. The most novel application addresses the too many plots to examine'' problem by using cognostics, computer guiding diagnostics, to prioritize plots. The particular application prioritizes views of computational fluid dynamics solution sets on the fly. That is, as each time step of a solution set is generated on a parallel processor the cognostics algorithms assess virtual plots based on the previous time step. Work in such areas is in its infancy and the examples suggest numerous challenges that remain. 35 refs., 15 figs.

Presenting simulation results in a nested loop plot.

Science.gov (United States)

Rücker, Gerta; Schwarzer, Guido

2014-12-12

Statisticians investigate new methods in simulations to evaluate their properties for future real data applications. Results are often presented in a number of figures, e.g., Trellis plots. We had conducted a simulation study on six statistical methods for estimating the treatment effect in binary outcome meta-analyses, where selection bias (e.g., publication bias) was suspected because of apparent funnel plot asymmetry. We varied five simulation parameters: true treatment effect, extent of selection, event proportion in control group, heterogeneity parameter, and number of studies in meta-analysis. In combination, this yielded a total number of 768 scenarios. To present all results using Trellis plots, 12 figures were needed. Choosing bias as criterion of interest, we present a 'nested loop plot', a diagram type that aims to have all simulation results in one plot. The idea was to bring all scenarios into a lexicographical order and arrange them consecutively on the horizontal axis of a plot, whereas the treatment effect estimate is presented on the vertical axis. The plot illustrates how parameters simultaneously influenced the estimate. It can be combined with a Trellis plot in a so-called hybrid plot. Nested loop plots may also be applied to other criteria such as the variance of estimation. The nested loop plot, similar to a time series graph, summarizes all information about the results of a simulation study with respect to a chosen criterion in one picture and provides a suitable alternative or an addition to Trellis plots.

Contour plotting programs for printer and Calcomp plotter

International Nuclear Information System (INIS)

Moller, P.

1980-07-01

Contour plotting programs for plotting contour diagrams on printers or Calcomp plotters are described. The subroutines also exist in versions that are useful for the special application of finding minima and saddlepoints of nuclear potential energy surfaces generated by the subroutine PETR3 of another program package. For the general user, however, the most interesting aspect of the plotting package is probably the possibility of generating printer contour plots. The plotting of printer contour plots is a very fast and convenient way of displaying two-dimensional functions. 3 figures

Plot til lyst

DEFF Research Database (Denmark)

Sandvik, Kjetil

Den velfungerende krimi faciliterer denne dobbelte plotlæsning ved at muliggøre en særlig form for legende og udforskende interaktion mellem læser og plot: Ved at lægge spor ud og holde tolkningsmuligheder og løsningsmuligheder åbne får vi mulighed for at påtage os og udføre opklaringsarbejdet side......, der inviterer os med ind i selve handlingens rum og forløb og giver os forskellige handlingsmuligheder i forhold til disse. I bogen omtales denne særlige form for plot for forlystelsesplot med henvisning til forlystelsesparken og den særlige form for interaktiv fortælleform, som vi finder der: en...

The rainfall plot: its motivation, characteristics and pitfalls.

Science.gov (United States)

Domanska, Diana; Vodák, Daniel; Lund-Andersen, Christin; Salvatore, Stefania; Hovig, Eivind; Sandve, Geir Kjetil

2017-05-18

A visualization referred to as rainfall plot has recently gained popularity in genome data analysis. The plot is mostly used for illustrating the distribution of somatic cancer mutations along a reference genome, typically aiming to identify mutation hotspots. In general terms, the rainfall plot can be seen as a scatter plot showing the location of events on the x-axis versus the distance between consecutive events on the y-axis. Despite its frequent use, the motivation for applying this particular visualization and the appropriateness of its usage have never been critically addressed in detail. We show that the rainfall plot allows visual detection even for events occurring at high frequency over very short distances. In addition, event clustering at multiple scales may be detected as distinct horizontal bands in rainfall plots. At the same time, due to the limited size of standard figures, rainfall plots might suffer from inability to distinguish overlapping events, especially when multiple datasets are plotted in the same figure. We demonstrate the consequences of plot congestion, which results in obscured visual data interpretations. This work provides the first comprehensive survey of the characteristics and proper usage of rainfall plots. We find that the rainfall plot is able to convey a large amount of information without any need for parameterization or tuning. However, we also demonstrate how plot congestion and the use of a logarithmic y-axis may result in obscured visual data interpretations. To aid the productive utilization of rainfall plots, we demonstrate their characteristics and potential pitfalls using both simulated and real data, and provide a set of practical guidelines for their proper interpretation and usage.

Four soil orders on a Vermont mountaintop-one-third of the world`s soil orders in a 2500-square-meter research plot

Science.gov (United States)

Thomas R. Villars; Scott W. Bailey; Donald S. Ross

2015-01-01

As part of the Vermont Long-Term Soil Monitoring Project, five 50 x 50 m plots were established on protected forestland across Vermont. In 2002, ten randomly selected subplots at each monitoring plot were sampled. The 10 pedons sampled at the high-elevation spruce-fir “Forehead” plot on Mount Mansfield were found to include soils of four taxonomic Orders: Entisols,...

The Question of Decalage Between Object Permanence and Person Permanence

Science.gov (United States)

And Others; Jackson, Elaine

1978-01-01

Presents a study of decalage between object permanence and person permanence. Decalage was influenced by environmental as well as stimulus factors with infants tested between 6- and 81/4-months/of-age. (BD)

Loss of the First Permanent Molar: Risk Factors and Adolescent Oral Health

OpenAIRE

Daraí Bárbara Sánchez Montero; Yahima Pons López; Ana Ibis Betancourt García; Anilec Santateresa Marchante

2017-01-01

Foundation: the replacement of the primary dentition begins with the eruption of the first permanent molars that will be subjected to various risk factors.Objective: to determine the existing relation between the first permanent molar loss and the risk factors in adolescents from 12 to 14 years old. Method: a cross descriptive study was developed between October 20011 and March 2012. On a universe of 560 students, a simple random sampling was done and a sample of 185 patients was selected. On...

Radiological site assessment at sun rose claim utilizing ScanPlot{sup SM} technology

Energy Technology Data Exchange (ETDEWEB)

Downey, H., E-mail: heath.downey@amecfw.com [Amec Foster Wheeler, Portland, ME (United States)

2015-07-01

ScanPlot{sup SM} gamma spectroscopy land survey system was utilized for the overland survey of uranium at the Sun Rose Claim in the Northwest Territories. The Sun Rose Claim is a former uranium exploration site and previous investigations had identified uranium ore and waste rock. ScanPlot{sup SM} radiological scan surveys were performed utilizing a backpack system. ScanPlot{sup SM} platform utilized spectroscopy grade sodium iodide detectors configured for optimal spatial coverage and radiation detection. Survey locations were recorded using an on-board global positioning system (GPS). The radiological spectral data from the radiation detectors is automatically logged and linked with the GPS coordinates to an on-board computer to create isocontour figures using a color scale to represent radioactivity levels. The advantage of utilizing the ScanPlot{sup SM} system for this assessment is that the nature and extent of uranium is provided without having to collect and assay a large number of samples. (author)

Forest health monitoring in New England: 1990 annual report

Science.gov (United States)

Robert T. Brooks; David R. Dickson; William B. Burkman; Imants Millers; Margaret Miller-Weeks; Ellen Cooter; Luther Smith; Luther Smith

1992-01-01

The USDA Forest Service, in cooperation with the U.S. Environmental Protection Agency and the New England State Forestry Agencies initiated field sampling for the Forest Health Monitoring program in 1990. Two hundred and sixty-three permanent sample plots were established. Measurements were taken to characterize the physical conditions of the plots. This publication...

Multiple hypothesis clustering in radar plot extraction

NARCIS (Netherlands)

Huizing, A.G.; Theil, A.; Dorp, Ph. van; Ligthart, L.P.

1995-01-01

False plots and plots with inaccurate range and Doppler estimates may severely degrade the performance of tracking algorithms in radar systems. This paper describes how a multiple hypothesis clustering technique can be applied to mitigate the problems involved in plot extraction. The measures of

Storytelling in Earth sciences: The eight basic plots

Science.gov (United States)

Phillips, Jonathan

2012-11-01

Reporting results and promoting ideas in science in general, and Earth science in particular, is treated here as storytelling. Just as in literature and drama, storytelling in Earth science is characterized by a small number of basic plots. Though the list is not exhaustive, and acknowledging that multiple or hybrid plots and subplots are possible in a single piece, eight standard plots are identified, and examples provided: cause-and-effect, genesis, emergence, destruction, metamorphosis, convergence, divergence, and oscillation. The plots of Earth science stories are not those of literary traditions, nor those of persuasion or moral philosophy, and deserve separate consideration. Earth science plots do not conform those of storytelling more generally, implying that Earth scientists may have fundamentally different motivations than other storytellers, and that the basic plots of Earth Science derive from the characteristics and behaviors of Earth systems. In some cases preference or affinity to different plots results in fundamentally different interpretations and conclusions of the same evidence. In other situations exploration of additional plots could help resolve scientific controversies. Thus explicit acknowledgement of plots can yield direct scientific benefits. Consideration of plots and storytelling devices may also assist in the interpretation of published work, and can help scientists improve their own storytelling.

Essure Permanent Birth Control

Science.gov (United States)

... Prosthetics Essure Permanent Birth Control Essure Permanent Birth Control Share Tweet Linkedin Pin it More sharing options ... Print Essure is a a permanently implanted birth control device for women (female sterilization). Implantation of Essure ...

Method and apparatus from imaging target components in a biological sample using permanent magnets

NARCIS (Netherlands)

Tibbe, Arjan G.J.; Terstappen, Leonardus Wendelinus Mathias Marie

2010-01-01

The present invention is a method and means for positive selecting and imaging target entities. This includes a coated permanent magnetic device for magnetic manipulation in the system of the present invention. The system immunomagnetically concentrates the target entity, fluorescently labels,

Measurement of the ω → π+π-π0 Dalitz plot distribution

Science.gov (United States)

Adlarson, P.; Augustyniak, W.; Bardan, W.; Bashkanov, M.; Bergmann, F. S.; Berłowski, M.; Bhatt, H.; Bondar, A.; Büscher, M.; Calén, H.; Ciepał, I.; Clement, H.; Czerwiński, E.; Demmich, K.; Engels, R.; Erven, A.; Erven, W.; Eyrich, W.; Fedorets, P.; Föhl, K.; Fransson, K.; Goldenbaum, F.; Goswami, A.; Grigoryev, K.; Gullström, C.-O.; Heijkenskjöld, L.; Hejny, V.; Hüsken, N.; Jarczyk, L.; Johansson, T.; Kamys, B.; Kemmerling, G.; Khan, F. A.; Khatri, G.; Khoukaz, A.; Khreptak, O.; Kirillov, D. A.; Kistryn, S.; Kleines, H.; Kłos, B.; Krzemień, W.; Kulessa, P.; Kupść, A.; Kuzmin, A.; Lalwani, K.; Lersch, D.; Lorentz, B.; Magiera, A.; Maier, R.; Marciniewski, P.; Mariański, B.; Morsch, H.-P.; Moskal, P.; Ohm, H.; Perez del Rio, E.; Piskunov, N. M.; Prasuhn, D.; Pszczel, D.; Pysz, K.; Pyszniak, A.; Ritman, J.; Roy, A.; Rudy, Z.; Rundel, O.; Sawant, S.; Schadmand, S.; Schätti-Ozerianska, I.; Sefzick, T.; Serdyuk, V.; Shwartz, B.; Sitterberg, K.; Skorodko, T.; Skurzok, M.; Smyrski, J.; Sopov, V.; Stassen, R.; Stepaniak, J.; Stephan, E.; Sterzenbach, G.; Stockhorst, H.; Ströher, H.; Szczurek, A.; Trzciński, A.; Varma, R.; Wolke, M.; Wrońska, A.; Wüstner, P.; Yamamoto, A.; Zabierowski, J.; Zieliński, M. J.; Złomańczuk, J.; Żuprański, P.; Żurek, M.; Kubis, B.; Leupold, S.

2017-07-01

Using the production reactions pd →3He ω and pp → ppω, the Dalitz plot distribution for the ω →π+π-π0 decay is studied with the WASA detector at COSY, based on a combined data sample of (4.408 ± 0.042) ×104 events. The Dalitz plot density is parametrised by a product of the P-wave phase space and a polynomial expansion in the normalised polar Dalitz plot variables Z and ϕ. For the first time, a deviation from pure P-wave phase space is observed with a significance of 4.1σ. The deviation is parametrised by a linear term 1 + 2 αZ, with α determined to be + 0.147 ± 0.036, consistent with the expectations of ρ-meson-type final-state interactions of the P-wave pion pairs.

Vegetation resurvey is robust to plot location uncertainty

Science.gov (United States)

Kopecký, Martin; Macek, Martin

2017-01-01

Aim Resurveys of historical vegetation plots are increasingly used for the assessment of decadal changes in plant species diversity and composition. However, historical plots are usually relocated only approximately. This potentially inflates temporal changes and undermines results. Location Temperate deciduous forests in Central Europe. Methods To explore if robust conclusions can be drawn from resurvey studies despite location uncertainty, we compared temporal changes in species richness, frequency, composition and compositional heterogeneity between exactly and approximately relocated plots. We hypothesized that compositional changes should be lower and changes in species richness should be less variable on exactly relocated plots, because pseudo-turnover inflates temporal changes on approximately relocated plots. Results Temporal changes in species richness were not more variable and temporal changes in species composition and compositional heterogeneity were not higher on approximately relocated plots. Moreover, the frequency of individual species changed similarly on both plot types. Main conclusions The resurvey of historical vegetation plots is robust to uncertainty in original plot location and, when done properly, provides reliable evidence of decadal changes in plant communities. This provides important background for other resurvey studies and opens up the possibility for large-scale assessments of plant community change. PMID:28503083

9 CFR 108.3 - Preparation of plot plans.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a... on the plot plan the use of immediate adjacent properties such as, residential area, pasture, box...

Permanences GAG-EPA

CERN Document Server

GAC-EPA

2015-01-01

Le GAC organise chaque mois des permanences avec entretiens individuels. La prochaine permanence se tiendra le : Mardi 5 mai de 13 h 30 à 16 h 00 Salle de réunion de l’Association du personnel Les permanences suivantes auront lieu les mardis 2 juin, 1er septembre, 6 octobre, 3 novembre et 1er décembre 2015. Les permanences du Groupement des Anciens sont ouvertes aux bénéficiaires de la Caisse de pensions (y compris les conjoints survivants) et à tous ceux qui approchent de la retraite. Nous invitons vivement ces derniers à s’associer à notre groupement en se procurant, auprès de l’Association du personnel, les documents nécessaires.

FLOWPLOT2, 2-D, 3-D Fluid Dynamic Plots

International Nuclear Information System (INIS)

Cobb, C.K.; Tunstall, J.N.

1989-01-01

1 - Description of program or function: FLOWPLOT2 is a plotting program used with numerical or analytical fluid dynamics codes to create velocity vector plots, contour plots of up to three fluid parameters (e.g. pressure, density, and temperature), two-dimensional profile plots, three-dimensional curve plots, and/or three-dimensional surface plots for either the u or v velocity components. If the fluid dynamics code computes a transient or simulated time related solution, FLOWPLOT2 can also be used to generate these plots for any specified time interval. Multiple cases generating different plots for different time intervals may be run in one execution of the program. In addition, plots can be created for selected two- dimensional planes of three-dimensional steady-state problems. The user has the option of producing plots on CalComp or Versatec plotters or microfiche and of creating a compressed dataset before plotting. 2 - Method of solution: FLOWPLOT2 reads a dataset written by the fluid dynamics code. This dataset must be written in a specified format and must contain parametric data at the nodal points of a uniform or non-uniform rectangular grid formed by the intersection of the grid lines of the model. 3 - Restrictions on the complexity of the problem - Maxima of: 2500 nodes, 40 y-values for 2-D profile plots and 3-D curve plots, 20 contour values, 3 fluid parameters

Early Working Memory in Children Born With Extremely Low Birth Weight: Assessed by Object Permanence

OpenAIRE

Lowe, Jean; MacLean, Peggy C.; Shaffer, Michele L.; Watterberg, Kristi

2009-01-01

Object permanence is considered the earliest method for assessing working memory. Factors affecting object permanence performance in a sample of two hundred and thirty-three 18- to 22-month olds born with extremely low birth weight were examined. It was hypothesized that object permanence would be directly related to emotional and attention regulation, that children with lower birth weight and higher illness severity would have more difficulty on the object permanence task, and that no ethnic...

Evaluating Plot Designs for the Tropics

Science.gov (United States)

Paul C. van Deusen; Bruce Bayle

1991-01-01

Theory and procedures are reviewed for determining the best type of plot for a given forest inventory. A general methodology is given that clarifies the relationship between different plot designs and the associated methods to produce the inventory estimates.

Emotional characters for automatic plot creation

NARCIS (Netherlands)

Theune, Mariet; Rensen, S.; op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.; Nijholt, Antinus; Göbel, S.; Spierling, U.; Hoffmann, A.; Iurgel, I.; Schneider, O.; Dechau, J.; Feix, A.

The Virtual Storyteller is a multi-agent framework for automatic story generation. In this paper we describe how plots emerge from the actions of semi-autonomous character agents, focusing on the influence of the characters’ emotions on plot development.

The interpretation of quartz optically stimulated luminescence equivalent dose versus time plots

International Nuclear Information System (INIS)

Bailey, R.M.

2000-01-01

Numerical modelling has shown that the form of the quartz OSL shine plateau (hereafter 'D e (t)-plot') is influenced by the effects of phototransferred TL in the ∼110 deg. C region. It is suggested also that the presence of multiple OSL components (as described by Partial bleaching and the decay form characteristics of quartz OSL. Radiat. Meas., 27, 123-136. The form of the optically stimulated luminescence signal of quartz: implications of dating. Unpublished PhD thesis, University of London) affects the form of the D e (t)-plot. Laboratory measurements of a fully reset and artificially dosed sample yielded non-flat D e (t)-plots, the deviation being greater for the larger of the two simulated palaeodoses, in accordance with theoretical predictions. It is suggested that the so-called 'shine plateau' test is of limited use in assessing the bleaching history of quartz sediments

Current state and temporal evolution of the chemical composition of atmospheric depositions in forest areas of the CONECOFOR network

Directory of Open Access Journals (Sweden)

Marchetto A

2014-04-01

Full Text Available Current state and temporal evolution of the chemical composition of atmospheric depositions in forest areas of the CONECOFOR network. Since 1997, atmospheric deposition was sampled and analyzed in the permanent plots of the Italian network for the evaluation of forest health (CONECOFOR, under the coordination of the Italian Forest Service. This paper presents the results of the activity carried out in 2009, when the EU-funded LIFE+ “FutMon” project allowed to extend the sampling network to 22 sites. Long-term trends will also be evaluated for the sampling sites with the longest time series. The sampling of open field bulk deposition was performed in a clearance close to the CONECOFOR permanent plots, while throughfall deposition and stemflow (in beech stand, only were sampled in the plot. Deposition samples were collected weekly and sent to the laboratories, where they were analyzed for pH, conductivity, major ions, and total carbon and nitrogen. Most measured variables showed a strong geographical gradient. For example, nitrogen deposition was relatively high in the Po plain (where the emissions of nitrogen oxides and ammonia are the highest and surrounding hills, reaching 10-20 kgN ha-1 y-1 in the open field and 13-25 kgN ha-1 y-1 in the throughfall. Sulphate deposition also showed a marked geographical gradient. Deposition of marine aerosol also had an important impact on the chemical composition of atmospheric deposition in Italy, together with the episodic deposition of Saharan dust, which showed a marked gradient, with highest values in the southernmost plots. Trend analysis was carried out on 10 sites running since the beginning of the program. A general negative trend in sulphate concentration was detected, paralleled in most plots by a positive trend in deposition pH, in good agreement with the strong reduction in the emission of sulphur dioxide recorded in the last decades. Nitrogen concentration also showed a significant decrease

Supragingival Microbial Profiles of Permanent and Deciduous Teeth in Children with Mixed Dentition.

Directory of Open Access Journals (Sweden)

Weihua Shi

Full Text Available The present study was designed to investigate the microbial profiles of teeth in different locations in mixed-dentition-stage children, and to compare the microbiomes of permanent and deciduous teeth in the same healthy oral cavity.Supragingival plaque samples of teeth in various locations-the first permanent molars, deciduous molars, deciduous canines and incisors and permanent incisors-were collected from 20 healthy mixed-dentition-stage children with 10-12 permanent teeth erupted. Plaque DNA was extracted, and the V3-V4 hypervariable region of the bacterial 16S rRNA gene was amplified and subjected to sequencing.On average, 18,051 high-quality sequences per sample were generated. Permanent tooth sites tended to host more diverse bacterial communities than those of deciduous tooth sites. A total of 12 phyla, 21 classes, 38 orders, 66 families, 74 genera were detected ultimately. Five predominant phyla (Proteobacteria, Firmicutes, Bacteroidetes, Fusobacteria and Actinobacteria were highly variable among sites. Of 26 genera with a mean relative abundance of >0.1%, 16 showed significant differences in relative abundance among the groups. More than 20% of the total operational taxonomical units were detected only in permanent or deciduous teeth. The variation in the microbial community composition was due mainly to permanent teeth being enriched in Actinomyces and deciduous teeth in Treponema. The core microbiome of supragingival plaque in mixed dentition comprised 19 genera with complex correlationships.Our results suggest differences in microbial diversity and composition between permanent and deciduous teeth sites in mixed dentition. Moreover, the core microbiome of these sites was determined. These findings enhance our understanding of the development of the native oral microbiota with age.

Effects of pocket gopher burrowing on cesium-133 distribution on engineered test plots

International Nuclear Information System (INIS)

Gonzales, G.J.; Saladen, M.T.; Hakonson, T.E.

1995-01-01

Very low levels of radionuclides exist on soil surfaces. Biological factors including vegetation and animal burrowing can influence the fate of these surface contaminants. Animal burrowing introduces variability in radionuclide migration that confounds estimation of nuclide migration pathways, risk assessment, and assessment of waste burial performance. A field study on the surface and subsurface erosional transport of surface-applied 133 Cs as affected by pocket gopher (Thomomys bottae) burrowing was conducted on simulated waste landfill caps at the Los Alamos National Laboratory in north central New Mexico. Surface loss of Cs, adhered to five soil particle size ranges, was measured several times over an 18-mo period while simulated rainfalls were in progress. Gophers reduced Cs surface loss by significant amounts, 43%. Cesium surface loss on plots with only gophers was 0.8 kg totalled for the study period. This compared with 1.4 kg for control plots, 0.5 kg for vegetated plots, and 0.2 kg for plots with both gophers and vegetation. The change in Cs surface loss over time was significant (P -1 ). Vegetation-bearing plots bad significant more total subsurface Cs (μ = 1.7 g kg -1 ) than plots without vegetation (μ = 0.8 g kg -1 ). An average of 97% of the subsurface Cs in plots with vegetation was located in the upper 15 cm of soil (SDR1 + SDR2) compared with 67% for plots without vegetation. Vegetation moderated the influence of gopher activity on the transport of Cs to soil subsurface, and stabilized subsurface Cs by concentrating it in the rhizosphere. Gopher activity may have caused Cs transport to depths below that sampled, 30 cm. The results provide distribution coefficients for models of contaminant migration where animal burrowing occurs. 35 refs., 2 figs., 3 tabs

Split-plot designs for robotic serial dilution assays.

Science.gov (United States)

Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

2011-12-01

This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. © 2011, The International Biometric Society.

Application of mapped plots for single-owner forest surveys

Science.gov (United States)

Paul C. Van Deusen; Francis Roesch

2009-01-01

Mapped plots are used for the nation forest inventory conducted by the U.S. Forest Service. Mapped plots are also useful foro single ownership inventoires. Mapped plots can handle boundary overlap and can aprovide less variable estimates for specified forest conditions. Mapping is a good fit for fixed plot inventories where the fixed area plot is used for both mapping...

Surveillance of Site A and Plot M report for 1991

International Nuclear Information System (INIS)

Golchert, N.W.

1992-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1991 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) determine the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and surface stream. For many years it was the only radionclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of borehole next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site or those living in the vicinity

Surveillance of Site A and Plot M. Report for 1996

International Nuclear Information System (INIS)

Golchert, N.W.

1997-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for 1996 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity

Coordination of Conditional Poisson Samples

Directory of Open Access Journals (Sweden)

Grafström Anton

2015-12-01

Full Text Available Sample coordination seeks to maximize or to minimize the overlap of two or more samples. The former is known as positive coordination, and the latter as negative coordination. Positive coordination is mainly used for estimation purposes and to reduce data collection costs. Negative coordination is mainly performed to diminish the response burden of the sampled units. Poisson sampling design with permanent random numbers provides an optimum coordination degree of two or more samples. The size of a Poisson sample is, however, random. Conditional Poisson (CP sampling is a modification of the classical Poisson sampling that produces a fixed-size πps sample. We introduce two methods to coordinate Conditional Poisson samples over time or simultaneously. The first one uses permanent random numbers and the list-sequential implementation of CP sampling. The second method uses a CP sample in the first selection and provides an approximate one in the second selection because the prescribed inclusion probabilities are not respected exactly. The methods are evaluated using the size of the expected sample overlap, and are compared with their competitors using Monte Carlo simulation. The new methods provide a good coordination degree of two samples, close to the performance of Poisson sampling with permanent random numbers.

3-D analysis of eddy current in permanent magnet of interior permanent magnet motors

International Nuclear Information System (INIS)

Kawase, Yoshihiro; Yamaguchi, Tadashi; Fukanaga, Hiromu; Ito, Shokichi

2002-01-01

Interior permanent magnet motors are widely used in various fields. However, in high-speed operations, it is important to decrease the eddy current loss in the permanent magnet. In order to decrease the eddy current loss, we propose to divide the permanent magnet. In this paper, we clarified the effect of division of permanent magnet on the eddy current loss using the 3-D finite element method. (Author)

Box Plots in the Australian Curriculum

Science.gov (United States)

Watson, Jane M.

2012-01-01

This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

Comparison of torque capability of three-phase permanent magnet synchronous motors with different permanent magnet arrangement

International Nuclear Information System (INIS)

Stumberger, Bojan; Stumberger, Gorazd; Hadziselimovic, Miralem; Hamler, Anton; Gorican, Viktor; Jesenik, Marko; Trlep, Mladen

2007-01-01

The paper presents a comparison of torque capability of three-phase permanent magnet synchronous motors with different permanent magnet arrangement. Motors with the following permanent magnet topologies were accounted for in the comparison: the surface-mounted permanent magnet synchronous motor (SMPMSM), the interior permanent magnet synchronous motor (IPMSM), the permanent magnet-assisted synchronous reluctance motor (PMASRM) and the flux reversal permanent magnet motor (FRPMM). Finite element method analysis is employed to determine the performance of each motor. Calculated performance of four-pole IPMSM determined by finite element method calculation is confirmed with the measurements at nearly constant nominal output power in the range of speed 3000-10,000 rpm

Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

Science.gov (United States)

Hullman, Jessica; Resnick, Paul; Adar, Eytan

2015-01-01

Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

Potato production on private plots contaminated by radionuclides

International Nuclear Information System (INIS)

Bogdevitch, I.; Tarasiuk, S.

2004-01-01

technology was developed and tested by stakeholders on 130 plots of Stolyn and Slavgorod districts during 2001-2003. The results have shown that potato yield in experiment was increased up to 35 t ha -1 or in 1.6 times to the control with usual technology. The 1 euro invested to the potato experiment provided 1.5-2.0 euros of net return on the average. The careful testing of technology by some participants allowed to reduce the 137 Cs and 90 Sr accumulation in potatoes up to 50-70% and the nitrate concentration in 1.5-2.6 times to the control. Presumably the 90 Sr concentration on plots contaminated by radionuclide and nitrate concentration in tuber should be permanently controlled. (author)

Measurement of the ω→π+π−π0 Dalitz plot distribution

Directory of Open Access Journals (Sweden)

P. Adlarson

2017-07-01

Full Text Available Using the production reactions pd→He3ω and pp→ppω, the Dalitz plot distribution for the ω→π+π−π0 decay is studied with the WASA detector at COSY, based on a combined data sample of (4.408±0.042×104 events. The Dalitz plot density is parametrised by a product of the P-wave phase space and a polynomial expansion in the normalised polar Dalitz plot variables Z and ϕ. For the first time, a deviation from pure P-wave phase space is observed with a significance of 4.1σ. The deviation is parametrised by a linear term 1+2αZ, with α determined to be +0.147±0.036, consistent with the expectations of ρ-meson-type final-state interactions of the P-wave pion pairs.

Dental anomalies in primary dentition and their corresponding permanent teeth.

Science.gov (United States)

Gomes, R R; Fonseca, J A C; Paula, L M; Acevedo, A C; Mestrinho, H D

2014-05-01

The objectives of this paper are to estimate the prevalence of dental anomalies in primary dentition in a sample of 2- to 5-year-old Brazilian preschool children, determine their distribution, and investigate their occurrence in the succedaneous teeth of the sample compared with a control group of children with no dental anomalies in the primary dentition. The one-stage sample comprised 1,718 two to five-year-old children with fully erupted primary dentition clinically examined for dental anomalies. All children presenting dental anomalies underwent panoramic radiographs. Descriptive statistics were performed for the studied variables. A control group matched by sex and age was studied to compare the prevalence ratio for dental anomalies in the permanent dentition. The prevalence of dental anomalies in the primary dentition was 1.8 %, with no significant statistical difference between sexes. Double teeth were the most frequently observed. Dental anomalies on the succedaneous permanent teeth were diagnosed in 54.8 % of the children with affected primary dentition. The prevalence ratio (PR) for dental anomalies in the succedaneous permanent teeth was 17.1 (confidence interval (CI) 5.33-54.12) higher compared with the control group, higher in children with bilateral anomalies (PR = 31.2, CI 10.18-94.36). An association between anomalies of the permanent dentition and the presence of dental anomalies in primary teeth was observed, especially when they occur bilaterally. The results in the present study have a clinical relevance in the diagnosis of children with dental anomalies in primary dentition. Early identification of these anomalies can aid the dentist in planning dental treatment at the appropriate time.

Permanent quadrupole magnets

International Nuclear Information System (INIS)

Bush, E.D. Jr.

1976-01-01

A family of quadrupole magnets using a soft iron return yoke and circular cross-section permanent magnet poles were fabricated to investigate the feasibility for use in ion or electron beam focusing applications in accelerators and transport lines. Magnetic field measurements yielded promising results. In fixed-field applications, permanent magnets with sufficient gradients would be a low cost substitute for conventional electromagnets, eliminating the need for power supplies, associated wiring, and cooling. Based on preliminary tests, it was seen that permanent quadrupole magnets can offer a low cost, reliable solution in applications requiring small, fixed-field focusing devices for use in ion or electron-beam transport systems. Permanent magnets do require special considerations in design, fabrication, handling, and service that are different than encountered in conventional quadrupole magnets. If these basic conditions are satisfied, the resulting beam-focusing device would be stable, maintenance free, with virtually an indefinite lifetime

The Application of TD/GC/NICI-MS with an Al2O3-PLOT-S Column for the Determination of Perfluoroalkylcycloalkanes in the Atmosphere.

Science.gov (United States)

Ren, Yu; Schlager, Hans; Martin, Damien

2014-01-01

A modified method for the quantitative determination of atmospheric perfluoroalkylcycloalkanes (PFCs) using thermal desorption coupled with gas chromatography and detection by negative ion chemical ionization-mass spectrometry was developed. Using an optimized analytical system, a commercially available Al 2 O 3 porous layer open tubular (PLOT) capillary column (30 m × 0.25 mm) deactivated with Na 2 SO 4 was used for separation of PFCs. Improvements in the separation of PFCs, the corresponding identification and the limit of detection of PFCs using this method and column are presented. The method was successfully applied to determine the atmospheric background concentrations of a range of PFCs from a number of samples collected at a rural site in Germany. The results of this study suggest that the method outlined using the Al 2 O 3 -PLOT-S capillary column has good sensitivity and selectivity, and that it can be deployed in a routine laboratory process for the analysis of PFCs in the future research work. In addition, the ability of this column to separate the isomers of one of the lower boiling PFCs (perfluorodimethylcyclobutane) and its ability to resolve perfluoroethylcyclohexane offer the opportunity for single-column analysis for multiple PFCs.

Split-plot fractional designs: Is minimum aberration enough?

DEFF Research Database (Denmark)

Kulahci, Murat; Ramirez, Jose; Tobias, Randy

2006-01-01

Split-plot experiments are commonly used in industry for product and process improvement. Recent articles on designing split-plot experiments concentrate on minimum aberration as the design criterion. Minimum aberration has been criticized as a design criterion for completely randomized fractional...... factorial design and alternative criteria, such as the maximum number of clear two-factor interactions, are suggested (Wu and Hamada (2000)). The need for alternatives to minimum aberration is even more acute for split-plot designs. In a standard split-plot design, there are several types of two...... for completely randomized designs. Consequently, we provide a modified version of the maximum number of clear two-factor interactions design criterion to be used for split-plot designs....

Homotopy classification of minimizers of the Ginzburg-Landau energy and the existence of permanent currents

International Nuclear Information System (INIS)

Rubinstein, J.

1996-01-01

Our objective is to explain the phenomenon of permanent currents within the context of the Ginzburg-Landau model for superconductors. Using variational techniques we make a connection between the formation of permanent currents and the topology of the superconducting sample. (orig.)

A new method to study ferroelectrics using the remanent Henkel plots

Science.gov (United States)

Vopson, Melvin M.

2018-05-01

Analysis of experimental curves constructed from dc demagnetization and isothermal remanent magnetization known as Henkel and delta M plots, have served for over 53 years as an important tool for characterization of interactions in ferromagnets. In this article we address the question whether the same experimental technique could be applied to the study of ferroelectric systems. The successful measurement of the equivalent dc depolarisation and isothermal remanent polarization curves and the construction of the Henkel and delta P plots for ferroelectrics is reported here. Full measurement protocol is provided together with experimental examples for two ferroelectric ceramic samples. This new measurement technique is an invaluable experimental tool that could be used to further advance our understanding of ferroelectric materials and their applications.

Color palette: Plotting guide for use with GSMAP and GSDRAW digital cartographic software

International Nuclear Information System (INIS)

Schilling, S.P.; Thompson, R.A.

1989-01-01

Guidelines for plotting a variety of colors and patterns using GSMAP and GSDRAW digital cartographic programs have been developed. These color and pattern variations can be used to fill polygons (areas) on maps, charts, or diagrams. Batch processing file for plotting a sample color/pattern palette on a Hewlett Packard 7585B 8-pen plotter using GSDRAW software are provided on the disk. The detailed instructions, batch processing files, and variables used to construct the palette will provide the user ready access to 99 fill patterns, and aid in designing other useful combinations. 2 refs., 2 figs

Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

Directory of Open Access Journals (Sweden)

Jessica Hullman

Full Text Available Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs, that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

The Heuristic Interpretation of Box Plots

Science.gov (United States)

Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

2013-01-01

Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

Early working memory in children born with extremely low birth weight: assessed by object permanence.

Science.gov (United States)

Lowe, Jean; MacLean, Peggy C; Shaffer, Michele L; Watterberg, Kristi

2009-04-01

Object permanence is considered the earliest method for assessing working memory. Factors affecting object permanence performance in a sample of two hundred and thirty-three 18- to 22-month olds born with extremely low birth weight were examined. It was hypothesized that object permanence would be directly related to emotional and attention regulation, that children with lower birth weight and higher illness severity would have more difficulty on the object permanence task, and that no ethnic/racial differences would be found, as this is considered a culturally unbiased task. Attainment of object permanence had a significant positive association with emotional and attention regulation, even after controlling the medical severity and socioeconomic factors. More girls than boys passed the object permanence items. There was no ethnic/racial difference on object permanence. Our findings indicate that object permanence may be a culturally fair way of assessing development, and emotional and attention regulation are potential avenues of intervention for such skill.

System for histogram entry, retrieval, and plotting

International Nuclear Information System (INIS)

Kellogg, M.; Gallup, J.M.; Shlaer, S.; Spencer, N.

1977-10-01

This manual describes the systems for producing histograms and dot plots that were designed for use in connection with the Q general-purpose data-acquisition system. These systems allow for the creation of histograms; the entry, retrieval, and plotting of data in the form of histograms; and the dynamic display of scatter plots as data are acquired. Although the systems are designed for use with Q, they can also be used as a part of other applications. 3 figures

Surveillance of Site A and Plot M, Report for 2008.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.

2009-05-07

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2008 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M, Report for 2009.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.

2010-04-21

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2009 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M report for 2010.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W. (ESQ)

2011-05-31

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2010 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of site A and plot M, report for 2007.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2008-03-25

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2007 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to: (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M - Report for 2006.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2007-05-07

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2006 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (PlotM) to the hand pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red GateWoods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M - Report for 2005.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2006-04-10

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2005 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby handpumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the handpumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Measurement of NdFeB permanent magnets demagnetization induced by high energy electron radiation

Energy Technology Data Exchange (ETDEWEB)

Temnykh, Alexander B. [Wilson Lab, Cornell University, LEPP, Ithaca, NY 14850 (United States)], E-mail: abt6@cornell.edu

2008-03-11

Demagnetization of NdFeB permanent magnets has been measured as function of radiation dose induced by high energy electrons. The magnet samples were of different intrinsic coercive forces, {approx_equal}12 and {approx_equal}20KOe, dimensions and direction of magnetization. 5 GeV electron beam from 12 GeV Cornell Synchrotron was used as a radiation source. A calorimetric technique was employed for radiation dose measurement. Results indicated that depending on the sample intrinsic coercive force, shape and direction of magnetization the radiation dose causing 1% of demagnetization of the sample varies from 0.0765{+-}0.005Mrad to 11.3{+-}3.0Mrad, i.e., by more than a factor of 100. Experimental data analysis revealed that demagnetization of the given sample induced by radiation is strongly correlated with the sample demagnetizing temperature. This correlation was approximated by an exponential function with two parameters obtained from the data fitting. The function can be used to predict the critical radiation dose for permanent magnet assemblies like undulator magnets based on its demagnetizing temperature. The latter (demagnetization temperature) can be determined at the design stage from 3-D magnetic modeling and permanent magnet material properties.

Recurrence plots of exchange rates of currencies

OpenAIRE

Sparavigna, Amelia Carolina

2014-01-01

Used to investigate the presence of distinctive recurrent behaviours in natural processes, the recurrence plots can be applied to the analysis of economic data, and, in particular, to the characterization of exchange rates of currencies too. In this paper, we will show that these plots are able to characterize the periods of oscillation and random walk of currencies and enhance their reply to news and events, by means of texture transitions. The examples of recurrence plots given here are obt...

PLOTTAB, Curve and Point Plotting with Error Bars

International Nuclear Information System (INIS)

1999-01-01

1 - Description of program or function: PLOTTAB is designed to plot any combination of continuous curves and/or discrete points (with associated error bars) using user supplied titles and X and Y axis labels and units. If curves are plotted, the first curve may be used as a standard; the data and the ratio of the data to the standard will be plotted. 2 - Method of solution: PLOTTAB: The program has no idea of what data is being plotted and yet by supplying titles, X and Y axis labels and units the user can produce any number of plots with each plot containing almost any combination of curves and points with each plot properly identified. In order to define a continuous curve between tabulated points, this program must know how to interpolate between points. By input the user may specify either the default option of linear x versus linear y interpolation or alternatively log x and/or log Y interpolation. In all cases, regardless of the interpolation specified, the program will always interpolate the data to the plane of the plot (linear or log x and y plane) in order to present the true variation of the data between tabulated points, based on the user specified interpolation law. Tabulated points should be tabulated at a sufficient number of x values to insure that the difference between the specified interpolation and the 'true' variation of a curve between tabulated values is relatively small. 3 - Restrictions on the complexity of the problem: A combination of up to 30 curves and sets of discrete points may appear on each plot. If the user wishes to use this program to compare different sets of data, all of the data must be in the same units

Loss of the First Permanent Molar: Risk Factors and Adolescent Oral Health

Directory of Open Access Journals (Sweden)

Daraí Bárbara Sánchez Montero

2017-02-01

Full Text Available Foundation: the replacement of the primary dentition begins with the eruption of the first permanent molars that will be subjected to various risk factors.Objective: to determine the existing relation between the first permanent molar loss and the risk factors in adolescents from 12 to 14 years old. Method: a cross descriptive study was developed between October 20011 and March 2012. On a universe of 560 students, a simple random sampling was done and a sample of 185 patients was selected. On school visits dental exams were performed to determine the Clune index dental caries index, filled and missing teeth and the simplified index of oral hygiene. The estimated relative risk was used with prevalence odd ratio and prevalence ratio was calculated. The studied variables were: sex, oral hygiene habits, and habits of cariogenic diet bucodental health. Results: the loss of the first permanent molar predominated in the male sex with a 14.1 %. The prevailing risk factor was cariogenic diet which affected 57.3 of the population, where 80.6 of those who had a high consumption showed loss of the first permanent molar. Clune index (53,4 % in the female and 40 % in the male sex, dental caries, filled and lost teeth (1.7 % in female and 2.9 in the male sex were calculated. Conclusion: there is a direct relation between risk factors, poor oral hygiene and cariogenic feeding with the loss of the first permanent molar.

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how

The Shorth Plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.; Sawitzki, G.

2008-01-01

The shorth plot is a tool to investigate probability mass concentration. It is a graphical representation of the length of the shorth, the shortest interval covering a certain fraction of the distribution, localized by forcing the intervals considered to contain a given point x. It is easy to

Use of vegetation sampling and analysis to detect a problem within a portion of a prairie restoration project.

Science.gov (United States)

Franson, Raymond; Scholes, Chad; Krabbe, Stephen

2017-01-02

In June 2005, the Department of Energy (DOE) began establishing the 60-ha Howell Prairie around the disposal cell at the DOE Weldon Spring Site (WSS). Prairies were historically present in the area of the site. Quantitative Cover sampling was used to quantify Total Cover, Native Grass Cover, Non-Native Grass Cover, Native Forb Cover, Non-Native Forb Cover, Warm Season (C 4 Grass), Cool Season (C 3 Grass), Perennial Cover and Annual Cover, Litter, and Bare Ground. Four permanent vegetation sampling plots were established. The first 4 years of vegetation measurements at Howell Prairie were made during above-average rainfall years on burned and unburned plots. The fifth-year (2012) vegetation measurements were made after below-average rainfall. Five years of results not only document the consistency of the restoration effort in three areas, but also demonstrate deficiencies in Grass Cover in a fourth area. The results are not only useful for Howell Prairie, but will be useful for restoration work throughout the region. Restoration work suffers from a lack of success monitoring and in this case from a lack of available reference areas. Floristic Quality Indices are used to make qualitative comparisons of the site to Konza Prairie sites.

Thickening the Plot.

Science.gov (United States)

Rose, Brian

1979-01-01

Examines the content of daytime serial dramas to determine how the narrative structure promotes a sense of involvement in viewers. Competing plot lines, the lack of a concrete sense of resolution, the pattern of episodes, and the audience's awareness of information kept secret from characters all contribute to audience involvement. (JMF)

Meanings attributed by nursing staff about permanent education in cardiovascular institution

Directory of Open Access Journals (Sweden)

Cintia Koerich

2016-02-01

Full Text Available Objective: to understand the meanings attributed by the nursing staff to permanent educational practices in a reference cardiovascular hospital. Methods: this is a qualitative study, which used the Grounded Theory in Data for collecting and analyzing data. The sample consisted of 22 nursing professionals. Results: the study presents two categories that highlight the need for further clarification of the nursing staff about the concept of permanent education in health, as well as reinforce the permanent education of nurses as a management practice which needs to be incorporated into other assignments in daily work. Conclusion: it is admitted the need to work the concepts of permanent education in health even in professional qualification, as well as place greater emphasis on managerial training of nurses, so they acquire the power to take their assignment as a nursing care manager and the nursing staff education contribute to the necessary changes in the health services.

The Wally plot approach to assess the calibration of clinical prediction models.

Science.gov (United States)

Blanche, Paul; Gerds, Thomas A; Ekstrøm, Claus T

2017-12-06

A prediction model is calibrated if, roughly, for any percentage x we can expect that x subjects out of 100 experience the event among all subjects that have a predicted risk of x%. Typically, the calibration assumption is assessed graphically but in practice it is often challenging to judge whether a "disappointing" calibration plot is the consequence of a departure from the calibration assumption, or alternatively just "bad luck" due to sampling variability. We propose a graphical approach which enables the visualization of how much a calibration plot agrees with the calibration assumption to address this issue. The approach is mainly based on the idea of generating new plots which mimic the available data under the calibration assumption. The method handles the common non-trivial situations in which the data contain censored observations and occurrences of competing events. This is done by building on ideas from constrained non-parametric maximum likelihood estimation methods. Two examples from large cohort data illustrate our proposal. The 'wally' R package is provided to make the methodology easily usable.

Computer Programs for Calculating and Plotting the Stability Characteristics of a Balloon Tethered in a Wind

Science.gov (United States)

Bennett, R. M.; Bland, S. R.; Redd, L. T.

1973-01-01

Computer programs for calculating the stability characteristics of a balloon tethered in a steady wind are presented. Equilibrium conditions, characteristic roots, and modal ratios are calculated for a range of discrete values of velocity for a fixed tether-line length. Separate programs are used: (1) to calculate longitudinal stability characteristics, (2) to calculate lateral stability characteristics, (3) to plot the characteristic roots versus velocity, (4) to plot the characteristic roots in root-locus form, (5) to plot the longitudinal modes of motion, and (6) to plot the lateral modes for motion. The basic equations, program listings, and the input and output data for sample cases are presented, with a brief discussion of the overall operation and limitations. The programs are based on a linearized, stability-derivative type of analysis, including balloon aerodynamics, apparent mass, buoyancy effects, and static forces which result from the tether line.

Estimation of Missing Observations in Two-Level Split-Plot Designs

DEFF Research Database (Denmark)

Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

2008-01-01

Inserting estimates for the missing observations from split-plot designs restores their balanced or orthogonal structure and alleviates the difficulties in the statistical analysis. In this article, we extend a method due to Draper and Stoneman to estimate the missing observations from unreplicated...... two-level factorial and fractional factorial split-plot (FSP and FFSP) designs. The missing observations, which can either be from the same whole plot, from different whole plots, or comprise entire whole plots, are estimated by equating to zero a number of specific contrast columns equal...... to the number of the missing observations. These estimates are inserted into the design table and the estimates for the remaining effects (or alias chains of effects as the case with FFSP designs) are plotted on two half-normal plots: one for the whole-plot effects and the other for the subplot effects...

Plot Description (PD)

Science.gov (United States)

Robert E. Keane

2006-01-01

The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

iCanPlot: visual exploration of high-throughput omics data using interactive Canvas plotting.

Directory of Open Access Journals (Sweden)

Amit U Sinha

Full Text Available Increasing use of high throughput genomic scale assays requires effective visualization and analysis techniques to facilitate data interpretation. Moreover, existing tools often require programming skills, which discourages bench scientists from examining their own data. We have created iCanPlot, a compelling platform for visual data exploration based on the latest technologies. Using the recently adopted HTML5 Canvas element, we have developed a highly interactive tool to visualize tabular data and identify interesting patterns in an intuitive fashion without the need of any specialized computing skills. A module for geneset overlap analysis has been implemented on the Google App Engine platform: when the user selects a region of interest in the plot, the genes in the region are analyzed on the fly. The visualization and analysis are amalgamated for a seamless experience. Further, users can easily upload their data for analysis--which also makes it simple to share the analysis with collaborators. We illustrate the power of iCanPlot by showing an example of how it can be used to interpret histone modifications in the context of gene expression.

Modeling Short-Range Soil Variability and its Potential Use in Variable-Rate Treatment of Experimental Plots

Directory of Open Access Journals (Sweden)

A Moameni

2011-02-01

Full Text Available Abstract In Iran, the experimental plots under fertilizer trials are managed in such a way that the whole plot area uniformly receives agricultural inputs. This could lead to biased research results and hence to suppressing of the efforts made by the researchers. This research was conducted in a selected site belonging to the Gonbad Agricultural Research Station, located in the semiarid region, northeastern Iran. The aim was to characterize the short-range spatial variability of the inherent and management-depended soil properties and to determine if this variation is large and can be managed at practical scales. The soils were sampled using a grid 55 m apart. In total, 100 composite soil samples were collected from topsoil (0-30 cm and were analyzed for calcium carbonate equivalent, organic carbon, clay, available phosphorus, available potassium, iron, copper, zinc and manganese. Descriptive statistics were applied to check data trends. Geostatistical analysis was applied to variography, model fitting and contour mapping. Sampling at 55 m made it possible to split the area of the selected experimental plot into relatively uniform areas that allow application of agricultural inputs with variable rates. Keywords: Short-range soil variability, Within-field soil variability, Interpolation, Precision agriculture, Geostatistics

Potato production on private plots contaminated by radionuclides

Energy Technology Data Exchange (ETDEWEB)

Bogdevitch, I.; Tarasiuk, S. [Belarusian Research Institute for Soil Science and Agrochemistry (BRISSA), Minsk (Belarus)

2004-07-01

experimental potato technology was developed and tested by stakeholders on 130 plots of Stolyn and Slavgorod districts during 2001-2003. The results have shown that potato yield in experiment was increased up to 35 t ha{sup -1} or in 1.6 times to the control with usual technology. The 1 euro invested to the potato experiment provided 1.5-2.0 euros of net return on the average. The careful testing of technology by some participants allowed to reduce the {sup 137}Cs and {sup 90}Sr accumulation in potatoes up to 50-70% and the nitrate concentration in 1.5-2.6 times to the control. Presumably the {sup 90}Sr concentration on plots contaminated by radionuclide and nitrate concentration in tuber should be permanently controlled. (author)

New permanent magnets

Science.gov (United States)

Müller, K.-H.; Krabbes, G.; Fink, J.; Gruß, S.; Kirchner, A.; Fuchs, G.; Schultz, L.

2001-05-01

Permanent magnets play an important role and are widely spread in daily-life applications. Due to their very low costs, large availability of the row materials and their high chemical stability, hard ferrites are still dominant in the permanent magnet market although their relatively poor magnetic properties are a distinct disadvantage. Today's high-performance magnets are mostly made from Nd 2Fe 14B. The aim of research is to combine the large spontaneous magnetization of 3d metals with strong anisotropy fields known from rare-earth transition-metal compounds and, at the same time, to maintain a high value of the Curie temperature. However, the number of iron-rich rare-earth intermetallics is very limited and, consequently, not much success can be noted in this field for the last 10 years. One alternative concept is to use magnetic fields trapped in type II superconductors where much higher fields can be achieved compared to conventional rare-earth magnets. Very recently, we obtained a trapped field as high as 14.4 T in a melt-textured YBCO bulk sample of a few centimeters in diameter. This is the highest value ever achieved in a bulk superconductor. The trapped field of a superconductor is not governed by the Laplace equation and, therefore, levitation works without any additional (active) stabilization. The disadvantage of these magnets is their low working temperature (of liquid nitrogen and below).

Permanent magnets including undulators and wigglers

CERN Document Server

Bahrdt, J

2010-01-01

After a few historic remarks on magnetic materials we introduce the basic definitions related to permanent magnets. The magnetic properties of the most common materials are reviewed and the production processes are described. Measurement techniques for the characterization of macroscopic and microscopic properties of permanent magnets are presented. Field simulation techniques for permanent magnet devices are discussed. Today, permanent magnets are used in many fields. This article concentrates on the applications of permanent magnets in accelerators starting from dipoles and quadrupoles on to wigglers and undulators.

Split-plot designs for multistage experimentation

DEFF Research Database (Denmark)

Kulahci, Murat; Tyssedal, John

2016-01-01

at the same time will be more efficient. However, there have been only a few attempts in the literature to provide an adequate and easy-to-use approach for this problem. In this paper, we present a novel methodology for constructing two-level split-plot and multistage experiments. The methodology is based...... be accommodated in each stage. Furthermore, split-plot designs for multistage experiments with good projective properties are also provided....

The isometric log-ratio (ilr)-ion plot: A proposed alternative to the Piper diagram

Science.gov (United States)

Shelton, Jenna L.; Engle, Mark A.; Buccianti, Antonella; Blondes, Madalyn S.

2018-01-01

The Piper diagram has been a staple for the analysis of water chemistry data since its introduction in 1944. It was conceived to be a method for water classification, determination of potential water mixing between end-members, and to aid in the identification of chemical reactions controlling a sample set. This study uses the information gleaned over the years since the release of the Piper diagram and proposes an alternative to it, capturing the strengths of the original diagram while adding new ideas to increase its robustness. The new method uses compositional data analysis to create 4 isometric log-ratio coordinates for the 6 major chemical species analyzed in the Piper diagram and transforms the data to a 4-field bi-plot, the ilr-ion plot. This ilr-ion plot conveys all of the information in the Piper diagram (water mixing, water types, and chemical reactions) while also visualizing additional data, the ability to examine Ca2+/Mg2+ versus Cl-/SO42−. The Piper and the ilr-ion plot were also compared using multiple synthetic and real datasets in order to illustrate the caveats and the advantages of using either diagram to analyze water chemistry data. Although there are challenges with using the ilr-ion plot (e.g., missing or zero values zeros in the dataset must be imputed by positive real numbers), it appears that the use of compositional data analysis coupled with the ilr-ion plot provides a more in-depth and complete analysis of water quality data compared to the original Piper diagram.

Influence of Plot Size on Efficiency of Biomass Estimates in Inventories of Dry Tropical Forests Assisted by Photogrammetric Data from an Unmanned Aircraft System

Directory of Open Access Journals (Sweden)

Daud Jones Kachamba

2017-06-01

Full Text Available Applications of unmanned aircraft systems (UASs to assist in forest inventories have provided promising results in biomass estimation for different forest types. Recent studies demonstrating use of different types of remotely sensed data to assist in biomass estimation have shown that accuracy and precision of estimates are influenced by the size of field sample plots used to obtain reference values for biomass. The objective of this case study was to assess the influence of sample plot size on efficiency of UAS-assisted biomass estimates in the dry tropical miombo woodlands of Malawi. The results of a design-based field sample inventory assisted by three-dimensional point clouds obtained from aerial imagery acquired with a UAS showed that the root mean square errors as well as the standard error estimates of mean biomass decreased as sample plot sizes increased. Furthermore, relative efficiency values over different sample plot sizes were above 1.0 in a design-based and model-assisted inferential framework, indicating that UAS-assisted inventories were more efficient than purely field-based inventories. The results on relative costs for UAS-assisted and pure field-based sample plot inventories revealed that there is a trade-off between inventory costs and required precision. For example, in our study if a standard error of less than approximately 3 Mg ha−1 was targeted, then a UAS-assisted forest inventory should be applied to ensure more cost effective and precise estimates. Future studies should therefore focus on finding optimum plot sizes for particular applications, like for example in projects under the Reducing Emissions from Deforestation and Forest Degradation, plus forest conservation, sustainable management of forest and enhancement of carbon stocks (REDD+ mechanism with different geographical scales.

Effects of Zr alloying on the microstructure and magnetic properties of Alnico permanent magnets

Science.gov (United States)

Rehman, Sajjad Ur; Ahmad, Zubair; Haq, A. ul; Akhtar, Saleem

2017-11-01

Alnico-8 permanent magnets were produced through casting and subsequent thermal treatment process. Magnetic alloy of nominal composition 32.5 Fe-7.5 Al-1.0 Nb-35.0 Co-4.0 Cu-14.0 Ni-6.0 Ti were prepared by arc melting and casting technique. The Zr was added to 32.5 Fe-7.5 Al-1.0 Nb-35.0 Co-4.0 Cu-14.0 Ni-6.0 Ti alloy ranging from 0.3 to 0.9 wt%. The magnets were developed by employing two different heat treatment cycles known as conventional treatment and thermo-magnetic annealing treatment. The samples were characterized by X-ray diffraction method, Scanning electron microscope and magnetometer by plotting magnetic hysteresis demagnetization curves. The results indicate that magnetic properties are strongly depended upon alloy chemistry and process. The 0.6 wt% Zr added alloys yielded the best magnetic properties among the studied alloys. The magnetic properties obtained through conventional heat treatment are Hc = 1.35 kOe, Br = 5.2 kG and (BH)max = 2 MGOe. These magnetic properties were enhanced to Hc = 1.64 kOe, Br = 6.3 kG and (BH)max = 3.7 MGOe by thermo-magnetic annealing treatment.

Marxism as permanent revolution

NARCIS (Netherlands)

van Ree, E.

2013-01-01

This article argues that the 'permanent revolution' represented the dominant element in Karl Marx and Friedrich Engels' political discourse, and that it tended to overrule considerations encapsulated in 'historical materialism'. In Marx and Engels's understanding, permanent revolution did not

Zooplankton resting egg banks in permanent and temporary tropical aquatic systems

Directory of Open Access Journals (Sweden)

Luciana Rabelo Araújo

Full Text Available AIM: We evaluated zooplankton resting egg banks and active communities in five coastal lagoons and in five temporary pools, aiming to compare the active and the dormant communities in such environments. As they differ in hydroperiod, we expected that pools present richer resting egg banks in comparison to those found in lagoons. METHODS: Zooplankton community was sampled twice in 2006 (lagoons and in 2010 (pools and resting egg banks were sampled once in December 2007 (lagoons and in May 2010 (pools. Resting eggs were isolated from the sediment by applying the sugar flotation method. RESULTS: In opposition to our expectation, species richness in the resting egg banks of pools did not differ from those of lagoons. Additionally, no difference was found between the active and the dormant zooplankton communities in each water body for both temporary and permanent environments. However, similarity between active and dormant communities was greater in permanent environments than it was in temporary environments. CONCLUSIONS: It seems that the diapause strategy observed in certain tropical zooplankton populations cannot be predicted based on the awareness of the environment type (permanent or temporary, since hatching cues may be species-specific.

The albatross plot: A novel graphical tool for presenting results of diversely reported studies in a systematic review.

Science.gov (United States)

Harrison, Sean; Jones, Hayley E; Martin, Richard M; Lewis, Sarah J; Higgins, Julian P T

2017-09-01

Meta-analyses combine the results of multiple studies of a common question. Approaches based on effect size estimates from each study are generally regarded as the most informative. However, these methods can only be used if comparable effect sizes can be computed from each study, and this may not be the case due to variation in how the studies were done or limitations in how their results were reported. Other methods, such as vote counting, are then used to summarize the results of these studies, but most of these methods are limited in that they do not provide any indication of the magnitude of effect. We propose a novel plot, the albatross plot, which requires only a 1-sided P value and a total sample size from each study (or equivalently a 2-sided P value, direction of effect and total sample size). The plot allows an approximate examination of underlying effect sizes and the potential to identify sources of heterogeneity across studies. This is achieved by drawing contours showing the range of effect sizes that might lead to each P value for given sample sizes, under simple study designs. We provide examples of albatross plots using data from previous meta-analyses, allowing for comparison of results, and an example from when a meta-analysis was not possible. Copyright © 2017 The Authors. Research Synthesis Methods Published by John Wiley & Sons Ltd.

SUPERIMPOSED MESH PLOTTING IN MCNP

Energy Technology Data Exchange (ETDEWEB)

J. HENDRICKS

2001-02-01

The capability to plot superimposed meshes has been added to MCNP{trademark}. MCNP4C featured a superimposed mesh weight window generator which enabled users to set up geometries without having to subdivide geometric cells for variance reduction. The variance reduction was performed with weight windows on a rectangular or cylindrical mesh superimposed over the physical geometry. Experience with the new capability was favorable but also indicated that a number of enhancements would be very beneficial, particularly a means of visualizing the mesh and its values. The mathematics for plotting the mesh and its values is described here along with a description of other upgrades.

SplicePlot: a utility for visualizing splicing quantitative trait loci.

Science.gov (United States)

Wu, Eric; Nance, Tracy; Montgomery, Stephen B

2014-04-01

RNA sequencing has provided unprecedented resolution of alternative splicing and splicing quantitative trait loci (sQTL). However, there are few tools available for visualizing the genotype-dependent effects of splicing at a population level. SplicePlot is a simple command line utility that produces intuitive visualization of sQTLs and their effects. SplicePlot takes mapped RNA sequencing reads in BAM format and genotype data in VCF format as input and outputs publication-quality Sashimi plots, hive plots and structure plots, enabling better investigation and understanding of the role of genetics on alternative splicing and transcript structure. Source code and detailed documentation are available at http://montgomerylab.stanford.edu/spliceplot/index.html under Resources and at Github. SplicePlot is implemented in Python and is supported on Linux and Mac OS. A VirtualBox virtual machine running Ubuntu with SplicePlot already installed is also available.

Reaction Order Ambiguity in Integrated Rate Plots

Science.gov (United States)

Lee, Joe

2008-01-01

Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

Sampling procedures for inventory of commercial volume tree species in Amazon Forest.

Science.gov (United States)

Netto, Sylvio P; Pelissari, Allan L; Cysneiros, Vinicius C; Bonazza, Marcelo; Sanquetta, Carlos R

2017-01-01

The spatial distribution of tropical tree species can affect the consistency of the estimators in commercial forest inventories, therefore, appropriate sampling procedures are required to survey species with different spatial patterns in the Amazon Forest. For this, the present study aims to evaluate the conventional sampling procedures and introduce the adaptive cluster sampling for volumetric inventories of Amazonian tree species, considering the hypotheses that the density, the spatial distribution and the zero-plots affect the consistency of the estimators, and that the adaptive cluster sampling allows to obtain more accurate volumetric estimation. We use data from a census carried out in Jamari National Forest, Brazil, where trees with diameters equal to or higher than 40 cm were measured in 1,355 plots. Species with different spatial patterns were selected and sampled with simple random sampling, systematic sampling, linear cluster sampling and adaptive cluster sampling, whereby the accuracy of the volumetric estimation and presence of zero-plots were evaluated. The sampling procedures applied to species were affected by the low density of trees and the large number of zero-plots, wherein the adaptive clusters allowed concentrating the sampling effort in plots with trees and, thus, agglutinating more representative samples to estimate the commercial volume.

Contemplation on Plot and Personification in Tehran Makhuf

OpenAIRE

Mirjalil Akrami; Mohammad Pashaei

2013-01-01

Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot...

Permanent quadrupole magnets

International Nuclear Information System (INIS)

Bush, E.D. Jr.

1976-01-01

A family of quadrupole magnets using a soft iron return yoke and circular cross-section permanent magnet poles were fabricated to investigate the feasibility for use in ion or electron beam focusing applications in accelerators and transport lines. Magnetic field measurements yielded promising results. In fixed-field applications, permanent magnets with sufficient gradients would be a low cost substitute for conventional electromagnets, eliminating the need for power supplies, associated wiring, and cooling. (author)

PET kinetic analysis --pitfalls and a solution for the Logan plot.

Science.gov (United States)

Kimura, Yuichi; Naganawa, Mika; Shidahara, Miho; Ikoma, Yoko; Watabe, Hiroshi

2007-01-01

The Logan plot is a widely used algorithm for the quantitative analysis of neuroreceptors using PET because it is easy to use and simple to implement. The Logan plot is also suitable for receptor imaging because its algorithm is fast. However, use of the Logan plot, and interpretation of the formed receptor images should be regarded with caution, because noise in PET data causes bias in the Logan plot estimates. In this paper, we describe the basic concept of the Logan plot in detail and introduce three algorithms for the Logan plot. By comparing these algorithms, we demonstrate the pitfalls of the Logan plot and discuss the solution.

SCALPLO, Plotting of Flux Output from SCALE Program

International Nuclear Information System (INIS)

Hersman, A.; De Leege, P.F.A.; Hoogenboom, J.E.

1993-01-01

1 - Description of program or function: SCALPLO is a plot program, designed to plot flux, power and spectrum information. Data exchange between SCALE modules and SCALPLO is via CCCC-interface files. As not all modules can produce these files, there are special routines supplied with SCALPLO that can produce CCCC-like files. These routines can be included in the code and for XSDRPM, CITATION, ANISN and DOT, the place to include these routines is supplied. 2 - Method of solution: SCALPLO consists of two sections. Firstly the pre-processor, which selects and reads the required data. Secondly the plot section which produces the plot on the selected output device. 3 - Restrictions on the complexity of the problem: SCALPLO requires DISSPLA version 11.0 or higher. The choice of output device depends on the devices installed

A drawback and an improvement of the classical Weibull probability plot

International Nuclear Information System (INIS)

Jiang, R.

2014-01-01

The classical Weibull Probability Paper (WPP) plot has been widely used to identify a model for fitting a given dataset. It is based on a match between the WPP plots of the model and data in shape. This paper carries out an analysis for the Weibull transformations that create the WPP plot and shows that the shape of the WPP plot of the data randomly generated from a distribution model can be significantly different from the shape of the WPP plot of the model due to the high non-linearity of the Weibull transformations. As such, choosing model based on the shape of the WPP plot of data can be unreliable. A cdf-based weighted least squares method is proposed to improve the parameter estimation accuracy; and an improved WPP plot is suggested to avoid the drawback of the classical WPP plot. The appropriateness and usefulness of the proposed estimation method and probability plot are illustrated by simulation and real-world examples

The effects of a low intensity fire on a mixed conifer forest in Bryce Canyon National Park, Utah

Science.gov (United States)

Henry V. Bastian

2001-01-01

Prescribed fire was used to reduce fuel loading and tree densities. Permanent vegetation and fuel loading plots were randomly established within prescribed burn units. The plots were established in 1995 and were sampled, immediately postburn (within 1 month of the fire), 1 year after the burn, and 2 years after the burn. The prescribed burns were implemented in August...

Development of TRatioPlot in ROOT

CERN Document Server

Gessinger-Befurt, Paul

2016-01-01

The ROOT data analysis and visualization framework is a software package which is widely used in physics, especially in high energy physics. A common visualization which has so far been lacking a direct implementation is the ratio plot, as well as a few similar types of plots. The scope and goal of the summer student project at CERN was to implement a class in ROOT itself, that can take care of the most common types of calculations, and produces high quality visuals.

Digital data collection in forest dynamics plots

Science.gov (United States)

Faith Inman-Narahari; Christian Giardina; Rebecca Ostertag; Susan Cordell; Lawren Sack

2010-01-01

Summary 1. Computers are widely used in all aspects of research but their application to in-field data collection for forest plots has rarely been evaluated. 2. We developed digital data collection methods using ESRI mapping software and ruggedized field computers to map and measure ~30 000 trees in two 4-ha forest dynamics plots in wet and dry...

Longleaf pine regeneration following Hurricane Ivan utilizing the RLGS plots

Science.gov (United States)

John C. Gilbert; John S. Kush

2013-01-01

On September 16, 2004, Hurricane Ivan hit the Alabama coast and severely impacted numerous plots in the U.S. Forest Service’s Regional Longleaf Growth Study (RLGS). The Escambia Experimental Forest (EEF) has 201 of the 325 RLGS plots. Nearly one-third of the EEF was impacted. Nine plots with pole-sized trees were entirely lost. Another 54 plots had some type of damage...

SEGY to ASCII: Conversion and Plotting Program

Science.gov (United States)

Goldman, Mark R.

1999-01-01

This report documents a computer program to convert standard 4 byte, IBM floating point SEGY files to ASCII xyz format. The program then optionally plots the seismic data using the GMT plotting package. The material for this publication is contained in a standard tar file (of99-126.tar) that is uncompressed and 726 K in size. It can be downloaded by any Unix machine. Move the tar file to the directory you wish to use it in, then type 'tar xvf of99-126.tar' The archive files (and diskette) contain a NOTE file, a README file, a version-history file, source code, a makefile for easy compilation, and an ASCII version of the documentation. The archive files (and diskette) also contain example test files, including a typical SEGY file along with the resulting ASCII xyz and postscript files. Requirements for compiling the source code into an executable are a C++ compiler. The program has been successfully compiled using Gnu's g++ version 2.8.1, and use of other compilers may require modifications to the existing source code. The g++ compiler is a free, high quality C++ compiler and may be downloaded from the ftp site: ftp://ftp.gnu.org/gnu Requirements for plotting the seismic data is the existence of the GMT plotting package. The GMT plotting package may be downloaded from the web site: http://www.soest.hawaii.edu/gmt/

True versus perturbed forest inventory plot locations for modeling: a simulation study

Science.gov (United States)

John W. Coulston; Kurt H. Riitters; Ronald E. McRoberts; William D. Smith

2006-01-01

USDA Forest Service Forest Inventory and Analysis plot information is widely used for timber inventories, forest health assessments, and environmental risk analyses. With few exceptions, true plot locations are not revealed; the plot coordinates are manipulated to obscure the location of field plots and thereby preserve plot integrity. The influence of perturbed plot...

Contributory Factors Related to Permanent Deformation of Hot Asphalt Mixtures

Directory of Open Access Journals (Sweden)

Alaa Husein Abd

2017-03-01

Full Text Available Permanent deformation (Rutting of asphalt pavements which appears in many roads in Iraq, have caused a major impact on pavement performance by reducing the useful service life of pavement and creating services hazards for highway users. The main objective of this research is investigating the effect of some contributory factors related to permanent deformation of asphalt concrete mixture. To meet the objectives of this research, available local materials are used including asphalt binder, aggregates, mineral filler and modified asphalt binder. The Superpave mix design system was adopted with varying volumetric compositions. The Superpave Gyratory Compactor was used to compact 24 asphalt concrete cylindrical specimens. To collect the required data and investigate the development of permanent deformation in asphalt concrete under repeated loadings, Wheel-Tracking apparatus has been used in a factorial testing program during which 44 slab samples; with dimensions of 400×300×50 mm; were tested to simulate . actual pavement. Based on wheel-tracking test results, it has been concluded that increasing the compaction temperature from 110 to 150ºC caused a decreasing in permanent deformation by 20.5 and 15.6 percent for coarse and fine gradation control asphalt mixtures respectively. While the permanent deformation decreased about 21.3 percent when the compaction temperature is increased from 110 to 150ºC for coarse gradation asphalt mixtures modified with styrene butadiene styrene SBS with 3 percent by asphalt binder weight.

Dalitz plot analysis of B-0 -> (D)over-bar(0)pi(+)pi(-) decays

NARCIS (Netherlands)

Aaij, R.; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassen, R.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; d'Argent, P.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Belogurov, S.; Onderwater, C. J. G.; Pellegrino, A.; Tolk, S.

2015-01-01

The resonant substructures of B-0 --> (D) over bar (0)pi(+)pi(-) decays are studied with the Dalitz plot technique. In this study a data sample corresponding to an integrated luminosity of 3.0 fb(-1) of pp collisions collected by the LHCb detector is used. The branching fraction of the B-0 --> (D)

FLOWCHART; a computer program for plotting flowcharts

Science.gov (United States)

Bender, Bernice

1982-01-01

The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five

Magnetic resonance elastometry using a single-sided permanent magnet

International Nuclear Information System (INIS)

Tan, Carl S; Marble, Andrew E; Ono, Yuu

2012-01-01

In this paper, we describe a magnetic resonance method of measuring material elasticity using a single-sided magnet with a permanent static field gradient. This method encodes sample velocity in a reciprocal space using Hahn spin-echoes with variable timing. The experimental results show a strong correlation between magnetic resonance signal attenuation and elasticity when an oscillating force is applied on the sample. This relationship in turn provides us with information about the displacement velocity experienced by the sample, which is inversely proportional to Young's modulus. The proposed method shows promise in offering a portable and cost-effective magnetic resonance elastography system. (paper)

MMS control system analysis using automated root-locus plot generation

International Nuclear Information System (INIS)

Hefler, J.W.

1987-01-01

Use of the Modular Modeling System (MMS) for control systems improvement has been impeded by the need to plot eigenvalues manually. This problem has been solved by an automatic eigenvalue plotting routine. A practical procedure for control systems analysis based upon automatically generated root-locus plots has been developed using the Advanced Continuous Simulation Language (ACSL)-based version of the Modular Modeling System. Examples are given of typical ACSL run-time statements. Actual root-locus and time history plots are shown for simple models (4 state variables). More complex models are discussed. The plots show the control systems response before and after the determination of tuning parameters using the methods described

Air Data - Tile Plot

Science.gov (United States)

This tool plots daily AQI values for a specific location and time period. Each square or “tile” represents one day of the year and is color-coded based on the AQI level for that day. The legend tallies the number of days in each AQI category.

Split-Plot Designs with Mirror Image Pairs as Subplots

DEFF Research Database (Denmark)

Tyssedal, John; Kulahci, Murat; Bisgaard, Soren

2011-01-01

In this article we investigate two-level split-plot designs where the sub-plots consist of only two mirror image trials. Assuming third and higher order interactions negligible, we show that these designs divide the estimated effects into two orthogonal sub-spaces, separating sub-plot main effects...... appealing with effects of major interest free from full aliasing assuming that 3rd and higher order interactions are negligible....

31 CFR 515.335 - Permanent resident alien.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Permanent resident alien. 515.335... Definitions § 515.335 Permanent resident alien. As used in § 515.208, the term permanent resident alien means an alien lawfully admitted for permanent residence into the United States. [61 FR 37386, July 18...

Lawful Permanent Residents - Annual Report

Data.gov (United States)

Department of Homeland Security — A lawful permanent resident (LPR) or 'green card' recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

Problems with sampling desert tortoises: A simulation analysis based on field data

Science.gov (United States)

Freilich, J.E.; Camp, R.J.; Duda, J.J.; Karl, A.E.

2005-01-01

The desert tortoise (Gopherus agassizii) was listed as a U.S. threatened species in 1990 based largely on population declines inferred from mark-recapture surveys of 2.59-km2 (1-mi2) plots. Since then, several census methods have been proposed and tested, but all methods still pose logistical or statistical difficulties. We conducted computer simulations using actual tortoise location data from 2 1-mi2 plot surveys in southern California, USA, to identify strengths and weaknesses of current sampling strategies. We considered tortoise population estimates based on these plots as "truth" and then tested various sampling methods based on sampling smaller plots or transect lines passing through the mile squares. Data were analyzed using Schnabel's mark-recapture estimate and program CAPTURE. Experimental subsampling with replacement of the 1-mi2 data using 1-km2 and 0.25-km2 plot boundaries produced data sets of smaller plot sizes, which we compared to estimates from the 1-mi 2 plots. We also tested distance sampling by saturating a 1-mi 2 site with computer simulated transect lines, once again evaluating bias in density estimates. Subsampling estimates from 1-km2 plots did not differ significantly from the estimates derived at 1-mi2. The 0.25-km2 subsamples significantly overestimated population sizes, chiefly because too few recaptures were made. Distance sampling simulations were biased 80% of the time and had high coefficient of variation to density ratios. Furthermore, a prospective power analysis suggested limited ability to detect population declines as high as 50%. We concluded that poor performance and bias of both sampling procedures was driven by insufficient sample size, suggesting that all efforts must be directed to increasing numbers found in order to produce reliable results. Our results suggest that present methods may not be capable of accurately estimating desert tortoise populations.

21 CFR 886.4445 - Permanent magnet.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Permanent magnet. 886.4445 Section 886.4445 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4445 Permanent magnet. (a) Identification. A permanent magnet is a nonelectric device that generates a magnetic field intended to find and remove metallic...

PLOT3D Export Tool for Tecplot

Science.gov (United States)

Alter, Stephen

2010-01-01

The PLOT3D export tool for Tecplot solves the problem of modified data being impossible to output for use by another computational science solver. The PLOT3D Exporter add-on enables the use of the most commonly available visualization tools to engineers for output of a standard format. The exportation of PLOT3D data from Tecplot has far reaching effects because it allows for grid and solution manipulation within a graphical user interface (GUI) that is easily customized with macro language-based and user-developed GUIs. The add-on also enables the use of Tecplot as an interpolation tool for solution conversion between different grids of different types. This one add-on enhances the functionality of Tecplot so significantly, it offers the ability to incorporate Tecplot into a general suite of tools for computational science applications as a 3D graphics engine for visualization of all data. Within the PLOT3D Export Add-on are several functions that enhance the operations and effectiveness of the add-on. Unlike Tecplot output functions, the PLOT3D Export Add-on enables the use of the zone selection dialog in Tecplot to choose which zones are to be written by offering three distinct options - output of active, inactive, or all zones (grid blocks). As the user modifies the zones to output with the zone selection dialog, the zones to be written are similarly updated. This enables the use of Tecplot to create multiple configurations of a geometry being analyzed. For example, if an aircraft is loaded with multiple deflections of flaps, by activating and deactivating different zones for a specific flap setting, new specific configurations of that aircraft can be easily generated by only writing out specific zones. Thus, if ten flap settings are loaded into Tecplot, the PLOT3D Export software can output ten different configurations, one for each flap setting.

Stream permanence influences crayfish occupancy and abundance in the Ozark Highlands, USA

Science.gov (United States)

Yarra, Allyson N.; Magoulick, Daniel D.

2018-01-01

Crayfish use of intermittent streams is especially important to understand in the face of global climate change. We examined the influence of stream permanence and local habitat on crayfish occupancy and species densities in the Ozark Highlands, USA. We sampled in June and July 2014 and 2015. We used a quantitative kick–seine method to sample crayfish presence and abundance at 20 stream sites with 32 surveys/site in the Upper White River drainage, and we measured associated local environmental variables each year. We modeled site occupancy and detection probabilities with the software PRESENCE, and we used multiple linear regressions to identify relationships between crayfish species densities and environmental variables. Occupancy of all crayfish species was related to stream permanence. Faxonius meeki was found exclusively in intermittent streams, whereas Faxonius neglectus and Faxonius luteushad higher occupancy and detection probability in permanent than in intermittent streams, and Faxonius williamsi was associated with intermittent streams. Estimates of detection probability ranged from 0.56 to 1, which is high relative to values found by other investigators. With the exception of F. williamsi, species densities were largely related to stream permanence rather than local habitat. Species densities did not differ by year, but total crayfish densities were significantly lower in 2015 than 2014. Increased precipitation and discharge in 2015 probably led to the lower crayfish densities observed during this year. Our study demonstrates that crayfish distribution and abundance is strongly influenced by stream permanence. Some species, including those of conservation concern (i.e., F. williamsi, F. meeki), appear dependent on intermittent streams, and conservation efforts should include consideration of intermittent streams as an important component of freshwater biodiversity.

Construction of an experimental plot seeder of wheat planting and compare it by imported one

Directory of Open Access Journals (Sweden)

I Eskandari

2016-09-01

Full Text Available Introduction Researchers frequently include multiple cultivars and fertility levels in field experiments. Therefore, the experiments sowing operation must represent a considerable saving in time and labor, compared to hand sowing. Greater flexibility in experimental design and setup could be achieved by equipment that enables quick changes in the cultivar and fertilizer rates from one plot to the next. A satisfactory seed drill must distribute a given quantity of seed evenly over a predetermined length of coulter row, the coulters must be spaced at exact intervals and depth of sowing must be uniform. In a self-propelled type of plot seeder, no coulter should run in a wheel track as the compaction of the soil can cause observable differences in vigor between plants in such a row and those in un-compacted rows. The machine should sow in succession from a try in which a series of seed pocket separated clearly and must be put into distributer funnel by an assistant operator. The length of gap being varied according to the nature and purpose of the plot. The objectives of this experiment were 1- to design and construct a local self-propelled plot seeder and 2- To compare it with the imported (Wintersteiger plot seeder in cereal breeding programs. Materials and Methods A small-plot seeder was designed and constructed to meet this objective. The unit consists of the following basic components: a toolbar for pulling a set of six blade coulter, an air compressor for lifting and putting down the openers and metering transmission drive wheel, an operators chair and work rack, one belt seed distribution. A cone-celled and rotor seed distributor is used for seed distribution to the openers. The cone system is connected to the gearbox and allows for great flexibility in changing cultivars, crop species, and plot length. This is driven by the separate drive wheel. The cone-celled distributor sows all the seed of the sample in making one complete turn. The

PETRO.CALC.PLOT, Microsoft Excel macros to aid petrologic interpretation

Science.gov (United States)

Sidder, G.B.

1994-01-01

PETRO.CALC.PLOT is a package of macros which normalizes whole-rock oxide data to 100%, calculates the cation percentages and molecular proportions used for normative mineral calculations, computes the apices for ternary diagrams, determines sums and ratios of specific elements of petrologic interest, and plots 33 X-Y graphs and five ternary diagrams. PETRO.CALC.PLOT also may be used to create other diagrams as desired by the user. The macros run in Microsoft Excel 3.0 and 4.0 for Macintosh computers and in Microsoft Excel 3.0 and 4.0 for Windows. Macros provided in PETRO.CALC.PLOT minimize repetition and time required to recalculate and plot whole-rock oxide data for petrologic analysis. ?? 1994.

Plotting of bathythermograph transect data on a printer

Science.gov (United States)

Reynolds, James B.; McLain, Douglas R.

1971-01-01

A program for plotting bathythermograph transect data on a computer (IBM 1130) printer is available from the Great Lakes Fishery Laboratory. Temperature values are printed in positions proportional to their depths and distances from shore. Contour lines are drawn manually through the plotted points.

Privatization of Land Plot Under Integral Real Estate Complex

Directory of Open Access Journals (Sweden)

Maruchek A. A.

2014-10-01

Full Text Available The article deals with the questions concerning the privatization of a land plot under integral real estate complex. The authors come to conclusion that a number of legislation norms relating to privatization of a land plot do not take into account the construction of an integral real estate complex that could cause some problems in the realization of the right to privatization of the land plot

Plotting and Analyzing Data Trends in Ternary Diagrams Made Easy

Science.gov (United States)

John, Cédric M.

2004-04-01

Ternary plots are used in many fields of science to characterize a system based on three components. Triangular plotting is thus useful to a broad audience in the Earth sciences and beyond. Unfortunately, it is typically the most expensive commercial software packages that offer the option to plot data in ternary diagrams, and they lack features that are paramount to the geosciences, such as the ability to plot data directly into a standardized diagram and the possibility to analyze temporal and stratigraphic trends within this diagram. To address these issues, δPlot was developed with a strong emphasis on ease of use, community orientation, and availability free of charges. This ``freeware'' supports a fully graphical user interface where data can be imported as text files, or by copying and pasting. A plot is automatically generated, and any standard diagram can be selected for plotting in the background using a simple pull-down menu. Standard diagrams are stored in an external database of PDF files that currently holds some 30 diagrams that deal with different fields of the Earth sciences. Using any drawing software supporting PDF, one can easily produce new standard diagrams to be used with δPlot by simply adding them to the library folder. An independent column of values, commonly stratigraphic depths or ages, can be used to sort the data sets.

[Permanent education in health: a review].

Science.gov (United States)

Miccas, Fernanda Luppino; Batista, Sylvia Helena Souza da Silva

2014-02-01

To undertake a meta-synthesis of the literature on the main concepts and practices related to permanent education in health. A bibliographical search was conducted for original articles in the PubMed, Web of Science, LILACS, IBECS and SciELO databases, using the following search terms: "public health professional education", "permanent education", "continuing education", "permanent education health". Of the 590 articles identified, after applying inclusion and exclusion criteria, 48 were selected for further analysis, grouped according to the criteria of key elements, and then underwent meta-synthesis. The 48 original publications were classified according to four thematic units of key elements: 1) concepts, 2) strategies and difficulties, 3) public policies and 4) educational institutions. Three main conceptions of permanent education in health were found: problem-focused and team work, directly related to continuing education and education that takes place throughout life. The main strategies for executing permanent education in health are discussion, maintaining an open space for permanent education , and permanent education clusters. The most limiting factor is mainly related to directly or indirect management. Another highlight is the requirement for implementation and maintenance of public policies, and the availability of financial and human resources. The educational institutions need to combine education and service aiming to form critical-reflexive graduates. The coordination between health and education is based as much on the actions of health services as on management and educational institutions. Thus, it becomes a challenge to implement the teaching-learning processes that are supported by critical-reflexive actions. It is necessary to carry out proposals for permanent education in health involving the participation of health professionals, teachers and educational institutions. To undertake a meta-synthesis of the literature on the main concepts and

Slope Stability of Geosynthetic Clay Liner Test Plots

Science.gov (United States)

Fourteen full-scale field test plots containing five types of geosynthetic clay liners (GCLs) were constructed on 2H:IV and 3H:IV slopes for the purpose of assessing slope stability. The test plots were designed to simulate typical final cover systems for landfill. Slides occurr...

Periodic permanent magnet focused klystron

Science.gov (United States)

Ferguson, Patrick; Read, Michael; Ives, R Lawrence

2015-04-21

A periodic permanent magnet (PPM) klystron has beam transport structures and RF cavity structures, each of which has permanent magnets placed substantially equidistant from a beam tunnel formed about the central axis, and which are also outside the extent of a cooling chamber. The RF cavity sections also have permanent magnets which are placed substantially equidistant from the beam tunnel, but which include an RF cavity coupling to the beam tunnel for enhancement of RF carried by an electron beam in the beam tunnel.

Evaluation of spontaneous space closure and development of permanent dentition after extraction of hypomineralized permanent first molars.

Science.gov (United States)

Jälevik, Birgitta; Möller, Marie

2007-09-01

The aim of this study was to evaluate spontaneous space closure, development of the permanent dentition, and need for orthodontic treatment after extraction of permanent first molars due to severe molar-incisor hypomineralization (MIH). Twenty-seven children aged 5.6-12.7 (median 8.2) years had one to four permanent first molars extracted due to severe MIH. Each case was followed up on individual indications 3.8-8.3 (median 5.7) years after extractions. The eruption of the permanent dentition, and space closure were documented by orthopantomograms, casts, photographs, and/or bitewings. Fifteen children were judged to have a favourable spontaneous development of their permanent dentition without any orthodontic intervention. Seven children were or should be subjected to orthodontic treatment for other reasons registered prior to the extraction. Five children were judged to have a treatment at least caused by the extractions, but three of them abstained because of no subjective treatment need. Extraction of permanent first molars severely affected by MIH is a good treatment alternative. Favourable spontaneous space reduction and development of the permanent dentition positioning can be expected without any intervention in the majority of cases extracted prior to the eruption of the second molar.

Modern permanent magnetic materials - preparation and properties

International Nuclear Information System (INIS)

Rodewald, W.

1989-01-01

First of all, the basic properties of the classical (steel, AlNiCo) permanent magnetic materials and the modern rare-earth (RE) permanent magnetic materials are compared. Since the properties of RE permanent magnets depend on the particular production process, the fundamentals of the main industrial processes (powder metallurgy, rapid-solidification technique) are described and the typical properties are explained. Furthermore the production processes in development such as mechanical alloying, melt spinning technique and extrusion upsetting are briefly outlined. For applying the permanent magnets, they have to be completely magnetized. The magnetization behaviour of the various RE permanent magnets is discussed by means of the internal demagnetization curve. Finally the various influences on the temperature stability of RE permanent magnets are compiled. (orig./MM) [de

Chain Plot: A Tool for Exploiting Bivariate Temporal Structures

OpenAIRE

Taylor, CC; Zempeni, A

2004-01-01

In this paper we present a graphical tool useful for visualizing the cyclic behaviour of bivariate time series. We investigate its properties and link it to the asymmetry of the two variables concerned. We also suggest adding approximate confidence bounds to the points on the plot and investigate the effect of lagging to the chain plot. We conclude our paper by some standard Fourier analysis, relating and comparing this to the chain plot.

9 CFR 108.2 - Plot plans, blueprints, and legends required.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Plot plans, blueprints, and legends... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.2 Plot plans, blueprints, and legends required. Each applicant for an establishment license shall prepare a plot plan showing all buildings for each particular land...

Lawful Permanent Residents Fiscal Year 2015 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2014 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2011 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2015 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2016 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2014 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Application of Tryptophan Fluorescence Bandwidth-Maximum Plot in Analysis of Monoclonal Antibody Structure.

Science.gov (United States)

Huang, Cheng-Yen; Hsieh, Ming-Ching; Zhou, Qinwei

2017-04-01

Monoclonal antibodies have become the fastest growing protein therapeutics in recent years. The stability and heterogeneity pertaining to its physical and chemical structures remain a big challenge. Tryptophan fluorescence has been proven to be a versatile tool to monitor protein tertiary structure. By modeling the tryptophan fluorescence emission envelope with log-normal distribution curves, the quantitative measure can be exercised for the routine characterization of monoclonal antibody overall tertiary structure. Furthermore, the log-normal deconvolution results can be presented as a two-dimensional plot with tryptophan emission bandwidth vs. emission maximum to enhance the resolution when comparing samples or as a function of applied perturbations. We demonstrate this by studying four different monoclonal antibodies, which show the distinction on emission bandwidth-maximum plot despite their similarity in overall amino acid sequences and tertiary structures. This strategy is also used to demonstrate the tertiary structure comparability between different lots manufactured for one of the monoclonal antibodies (mAb2). In addition, in the unfolding transition studies of mAb2 as a function of guanidine hydrochloride concentration, the evolution of the tertiary structure can be clearly traced in the emission bandwidth-maximum plot.

User manual for two simple postscript output FORTRAN plotting routines

Science.gov (United States)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Intelligence Constraints on Terrorist Network Plots

Science.gov (United States)

Woo, Gordon

Since 9/11, the western intelligence and law enforcement services have managed to interdict the great majority of planned attacks against their home countries. Network analysis shows that there are important intelligence constraints on the number and complexity of terrorist plots. If two many terrorists are involved in plots at a given time, a tipping point is reached whereby it becomes progressively easier for the dots to be joined and for the conspirators to be arrested, and for the aggregate evidence to secure convictions. Implications of this analysis are presented for the campaign to win hearts and minds.

Multilocational evaluation of white yam genotypes using GGE bi-plot ...

African Journals Online (AJOL)

Five new white yam genotypes were evaluated in different locations of major yam producing areas; Umudike, Nsukka, Ubiaja, Abuja and Katsina-Ala, to test the performance and stability of these genotypes across the environments using GGE bi-plot software. The GGE bi-plot generated several graphic bi-plots which ...

On-plot drinking water supplies and health: A systematic review.

Science.gov (United States)

Overbo, Alycia; Williams, Ashley R; Evans, Barbara; Hunter, Paul R; Bartram, Jamie

2016-07-01

Many studies have found that household access to water supplies near or within the household plot can reduce the probability of diarrhea, trachoma, and other water-related diseases, and it is generally accepted that on-plot water supplies produce health benefits for households. However, the body of research literature has not been analyzed to weigh the evidence supporting this. A systematic review was conducted to investigate the impacts of on-plot water supplies on diarrhea, trachoma, child growth, and water-related diseases, to further examine the relationship between household health and distance to water source and to assess whether on-plot water supplies generate health gains for households. Studies provide evidence that households with on-plot water supplies experience fewer diarrheal and helminth infections and greater child height. Findings suggest that water-washed (hygiene associated) diseases are more strongly impacted by on-plot water access than waterborne diseases. Few studies analyzed the effects of on-plot water access on quantity of domestic water used, hygiene behavior, and use of multiple water sources, and the lack of evidence for these relationships reveals an important gap in current literature. The review findings indicate that on-plot water access is a useful health indicator and benchmark for the progressive realization of the Sustainable Development Goal target of universal safe water access as well as the human right to safe water. Copyright © 2016 Elsevier GmbH. All rights reserved.

Development of biochemical properties in anthropic soil (the study at Třinec–Jahodná plot

Directory of Open Access Journals (Sweden)

Karel Marosz

2013-01-01

Full Text Available The properties of the anthropic soils formed at the sludge bed “Třinec-Jahodná”. The sludge bed came from a long-time depositing of fly-ash and slag layers. Therefore, the anthropic soil properties obtained their features by both a character of layered substrate and a management of the local land reclamation. The paper presented deals with the rate of an intensity of biological and biochemical soil processes in charge of the fulfilment of plant nourishment demands, and the time viewpoints focusing on the local soil development. The set of enzymatic and biological measurements were chosen for treatments of soil bodies sampled throughout 2007–2008. The study plots inside the sludge bed and the control plot were sampled; the properties of particular horizons were studied. The results proved that the twenty-year-development of soil bodies made the proper conditions for plant nutrition. The positive statement, nevertheless, is directly linked to the presence of trees and shrubs. The vegetation seems to be one of the very crucial factors for a status of the site and maintenance of soil productivity: it affects temperature amplitudes, sensitivity to erosion, a redistribution of soil water, and a humic compounds accumulation. The statistical analyses showed significantly differing results on the study plots with a shorter development and a lower rate of vegetational cover.

6th International Symposium on Recurrence Plots

CERN Document Server

Jr, Jr; Ioana, Cornel; Marwan, Norbert

2016-01-01

The chapters in this book originate from the research work and contributions presented at the Sixth International Symposium on Recurrence Plots held in Grenoble, France in June 2015. Scientists from numerous disciplines gathered to exchange knowledge on recent applications and developments in recurrence plots and recurrence quantification analysis. This meeting was remarkable because of the obvious expansion of recurrence strategies (theory) and applications (practice) into ever-broadening fields of science. It discusses real-world systems from various fields, including mathematics, strange attractors, applied physics, physiology, medicine, environmental and earth sciences, as well as psychology and linguistics. Even readers not actively researching any of these particular systems will benefit from discovering how other scientists are finding practical non-linear solutions to specific problems. The book is of interest to an interdisciplinary audience of recurrence plot users and researchers interested in time...

Topology optimized permanent magnet systems

DEFF Research Database (Denmark)

Bjørk, Rasmus; Bahl, Christian; Insinga, Andrea Roberto

2017-01-01

Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. The Halbach cylinder is topology optimized with iron...... and an increase of 15% in magnetic efficiency is shown. A topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111%. Finally, a permanent magnet with alternating high and low field regions is topology optimized and a ΛcoolΛcool figure of merit of 0...

Object permanence in lemurs.

Science.gov (United States)

Deppe, Anja M; Wright, Patricia C; Szelistowski, William A

2009-03-01

Object permanence, the ability to mentally represent objects that have disappeared from view, should be advantageous to animals in their interaction with the natural world. The objective of this study was to examine whether lemurs possess object permanence. Thirteen adult subjects representing four species of diurnal lemur (Eulemur fulvus rufus, Eulemur mongoz, Lemur catta and Hapalemur griseus) were presented with seven standard Piagetian visible and invisible object displacement tests, plus one single visible test where the subject had to wait predetermined times before allowed to search, and two invisible tests where each hiding place was made visually unique. In all visible tests lemurs were able to find an object that had been in clear view before being hidden. However, when lemurs were not allowed to search for up to 25-s, performance declined with increasing time-delay. Subjects did not outperform chance on any invisible displacements regardless of whether hiding places were visually uniform or unique, therefore the upper limit of object permanence observed was Stage 5b. Lemur species in this study eat stationary foods and are not subject to stalking predators, thus Stage 5 object permanence is probably sufficient to solve most problems encountered in the wild.

arXiv Laura++ : a Dalitz plot fitter

CERN Document Server

Back, John; Harrison, Paul; Latham, Thomas; O'Hanlon, Daniel; Qian, Wenbin; del Amo Sanchez, Pablo; Craik, Daniel; Ilic, Jelena; Otalora Goicochea, Juan; Puccio, Eugenia; Silva Coutinho, Rafael; Whitehead, Mark

The Dalitz plot analysis technique has become an increasingly important method in heavy flavour physics. The Laura++ fitter has been developed as a flexible tool that can be used for Dalitz plot analyses in different experimental environments. Explicitly designed for three-body decays of heavy-flavoured mesons to spinless final state particles, it is optimised in order to describe all possible resonant or nonresonant contributions, and to accommodate possible CP violation effects.

SnagPRO: snag and tree sampling and analysis methods for wildlife

Science.gov (United States)

Lisa J. Bate; Michael J. Wisdom; Edward O. Garton; Shawn C. Clabough

2008-01-01

We describe sampling methods and provide software to accurately and efficiently estimate snag and tree densities at desired scales to meet a variety of research and management objectives. The methods optimize sampling effort by choosing a plot size appropriate for the specified forest conditions and sampling goals. Plot selection and data analyses are supported by...

THERAPIE - THErmix-RAps-Plot-InterfacE. A graphic software for representation of THERMIX-2D results with the interactive plot program RAPS

International Nuclear Information System (INIS)

Duensing, P.; Jahn, W.; Rehm, W.

1986-09-01

The performance of safety analyses for gas-cooled high temperature reactor power plants requires efficient plot codes for the evaluation and representation of computer results. The report describes the coupling between the thermodynamic simulation code THERMIX and the graphic plot code RAPS via the interface program THERAPIE. Especially the structure and the handling of the interface program are explained as well as the dialogue with the plot code. Further options of the colour graphic system are demonstrated for the representation of temperature distributions in components of HTR concepts (HTR-500). (orig.) [de

Graphite furnace atomic absorption spectrometric determination of Ni and Pb in diesel and gasoline samples stabilized as microemulsion using conventional and permanent modifiers

International Nuclear Information System (INIS)

Matos Reyes, Mariela N.; Campos, Reinaldo C.

2005-01-01

A procedure for the graphite furnace atomic absorption spectrometric determination of Ni and Pb in diesel and gasoline samples was developed. Sample stabilization was necessary because of evident analyte losses that occurred immediately after sampling. Excellent long-term sample stabilization was observed by mixing different organic solvents with propan-1-ol and 50% vol/vol HNO 3 at a 3.3:6.5:1 volume ratio. For Pb, efficient thermal stabilization was obtained using aqueous Pd-Mg modifier as well as for Ir as permanent modifier. The drying temperature and ramp rate influenced the sensitivity obtained for Ni, and had to be carefully optimized. Taking this into account, the same sensitivity was attained in all investigated organic media stabilized as microemulsion. Thus, calibration with microemulsions prepared with a single organic solvent was possible, using aqueous or organic stock solutions. Commercial gasoline and diesel samples were directly analyzed after stabilization as microemulsion and by comparative UOP procedures. n-Hexane microemulsions were used for calibration, and good agreement was obtained between the results using the proposed and comparative procedures. Typical coefficients of variation (n = 6) ranged from 1% to 4%, and from 1% to 3% for Ni and Pb, respectively. Detection limits (k = 3) in the original gasoline or diesel samples, derived from 10 blank measurements, were 4.5 and 3.6 μg l -1 for Ni and Pb, respectively, comfortably below the values found in the analyzed samples

Clinical characteristics, management, and control of permanent vs. nonpermanent atrial fibrillation: insights from the RealiseAF survey.

LENUS (Irish Health Repository)

Murin, Jan

2014-01-01

Atrial fibrillation can be categorized into nonpermanent and permanent atrial fibrillation. There is less information on permanent than on nonpermanent atrial fibrillation patients. This analysis aimed to describe the characteristics and current management, including the proportion of patients with successful atrial fibrillation control, of these atrial fibrillation subsets in a large, geographically diverse contemporary sample.

Iron status determination in pregnancy using the Thomas plot.

Science.gov (United States)

Weyers, R; Coetzee, M J; Nel, M

2016-04-01

Physiological changes during pregnancy affect routine tests for iron deficiency. The reticulocyte haemoglobin equivalent (RET-He) and serum-soluble transferrin receptor (sTfR) assay are newer diagnostic parameters for the detection of iron deficiency, combined in the Thomas diagnostic plot. We used this plot to determine the iron status of pregnant women presenting for their first visit to an antenatal clinic in Bloemfontein, South Africa. Routine laboratory tests (serum ferritin, full blood count and C-reactive protein) and RET-He and sTfR were performed. The iron status was determined using the Thomas plot. For this study, 103 pregnant women were recruited. According to the Thomas plot, 72.8% of the participants had normal iron stores and erythropoiesis. Iron-deficient erythropoiesis was detected in 12.6%. A third of participants were anaemic. Serum ferritin showed excellent sensitivity but poor specificity for detecting depleted iron stores. HIV status had no influence on the iron status of the participants. Our findings reiterate that causes other than iron deficiency should be considered in anaemic individuals. When compared with the Thomas plot, a low serum ferritin is a sensitive but nonspecific indicator of iron deficiency. The Thomas plot may provide useful information to identify pregnant individuals in whom haematologic parameters indicate limited iron availability for erythropoiesis. © 2015 John Wiley & Sons Ltd.

Myth Structure and Media Fiction Plot: An Exploration.

Science.gov (United States)

Harless, James D.

Based on the general research of Joseph Campbell in adventure plots from mythology, the author explores the simplified monomyth plots currently in frequent use in mass media programing. The close relationship of media fiction to mythic stories is established through the analysis of more than 25 stories resulting from media broadcasting. The media…

Research Note Pilot survey to assess sample size for herbaceous ...

African Journals Online (AJOL)

A pilot survey to determine sub-sample size (number of point observations per plot) for herbaceous species composition assessments, using a wheel-point apparatus applying the nearest-plant method, was conducted. Three plots differing in species composition on the Zululand coastal plain were selected, and on each plot ...

Prevalence of dental anomalies in the permanent dentition of children with Down syndrome.

Science.gov (United States)

Sekerci, Ahmet Ercan; Cantekin, Kenan; Aydinbelge, Mustafa; Ucar, Faruk İzzet

2014-01-01

The purpose of this study was to evaluate the prevalence of various congenital dental anomalies in the permanent dentition of Turkish children with Down syndrome. The sample consisted of 216 diagnostic records of children diagnosed with Down syndrome. All subjects had a clinical examination as well as radiographs and photographs taken. Anomalies in the permanent dentition were documented. There was a high incidence of dental anomalies, the most frequent being taurodontism (81 percent), rotation (28 percent), hypodontia (26 percent), tooth impaction (18 percent), ectopic eruption (14 percent), microdontia (13 percent), and hyperdontia (9 percent). Differences in prevalence of congenitally missing teeth, structural anomalies, and positional anomalies reached a statistically significant level regarding gender (Panomalies affecting the permanent dentition, and, in most cases, individuals presented with more than one anomaly.

Marxism as permanent revolution

OpenAIRE

van Ree, E.

2013-01-01

This article argues that the 'permanent revolution' represented the dominant element in Karl Marx and Friedrich Engels' political discourse, and that it tended to overrule considerations encapsulated in 'historical materialism'. In Marx and Engels's understanding, permanent revolution did not represent a historical shortcut under exceptional circumstances, but the course revolutions in the modern era would normally take. Marx and Engels traced back the pattern to the sixteenth century. It is ...

Application of SWAT99.2 to sensitivity analysis of water balance components in unique plots in a hilly region

Directory of Open Access Journals (Sweden)

Jun-feng Dai

2017-07-01

Full Text Available Although many sensitivity analyses using the soil and water assessment tool (SWAT in a complex watershed have been conducted, little attention has been paid to the application potential of the model in unique plots. In addition, sensitivity analysis of percolation and evapotranspiration with SWAT has seldom been undertaken. In this study, SWAT99.2 was calibrated to simulate water balance components for unique plots in Southern China from 2000 to 2001, which included surface runoff, percolation, and evapotranspiration. Twenty-one parameters classified into four categories, including meteorological conditions, topographical characteristics, soil properties, and vegetation attributes, were used for sensitivity analysis through one-at-a-time (OAT sampling to identify the factor that contributed most to the variance in water balance components. The results were shown to be different for different plots, with parameter sensitivity indices and ranks varying for different water balance components. Water balance components in the broad-leaved forest and natural grass plots were most sensitive to meteorological conditions, less sensitive to vegetation attributes and soil properties, and least sensitive to topographical characteristics. Compared to those in the natural grass plot, water balance components in the broad-leaved forest plot demonstrated higher sensitivity to the maximum stomatal conductance (GSI and maximum leaf area index (BLAI.

Dalitz plot analysis of B-s(0) -> (D)over-bar(0)K(-)pi(+) decays

NARCIS (Netherlands)

Aaij, R.; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Alvarez Cartelle, P.; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Anderson, J.; Andreassen, R.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Bay, A.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Belogurov, S.; Belous, K.; Onderwater, G.; Pellegrino, A.

2014-01-01

The resonant substructure of B-s(0) -> (D) over bar K-0(-)pi(+) decays is studied with the Dalitz plot analysis technique. The study is based on a data sample corresponding to an integrated luminosity of 3.0 fb(-1) of pp collision data recorded by LHCb. A structure at m((D) over bar K-0(-))

The 2002 RPA Plot Summary database users manual

Science.gov (United States)

Patrick D. Miles; John S. Vissage; W. Brad Smith

2004-01-01

Describes the structure of the RPA 2002 Plot Summary database and provides information on generating estimates of forest statistics from these data. The RPA 2002 Plot Summary database provides a consistent framework for storing forest inventory data across all ownerships across the entire United States. The data represents the best available data as of October 2001....

Canadian Eskimo permanent tooth emergence timing.

Science.gov (United States)

Mayhall, J T; Belier, P L; Mayhall, M F

1978-08-01

To identify the times of emergence of the permanent teeth of Canadian Eskimos (Inuit), 368 children and adolescents were examined. The presence or absence of all permanent teeth except the third molars was recorded and these data subjected to probit analysis. Female emergence times were advanced over males. Generally, the Inuit of both sexes showed statistically significant earlier emergence times than Montreal children, except for the incisors. The present results do not support hypotheses indicating that premature extraction of the deciduous teeth advances the emergence of their succedaneous counterparts. There is some indication the controls of deciduous tooth emergence continue to play some part in emergence of the permanent dentition, especially the first permanent teeth that emerge.

Online plot services for paleomagnetism and rock magnetism

Science.gov (United States)

Hatakeyama, T.

2017-12-01

In paleomagnetism and rock magnetism, a lot of types of original plots are used for obtained data from measurements. Many researchers in paleomagnetism often use not only general-purpose plotting programs such as Microsoft Excel but also single-purpose tools. A large benefit of using the latter tools is that we can make a beautiful figure for our own data. However, those programs require specific environment for their operation such as type of hardware and platform, type of operation system and its version, libraries for execution and so on. Therefore, it is difficult to share the result and graphics among the collaborators who use different environments on their PCs. Thus, one of the best solution is likely a program operated on popular environment. The most popular is web environment as we all know. Almost all current operating systems have web browsers as standard and all people use them regularly. Now we provide a web-based service plotting paleomagnetic results easily.We develop original programs with a command-line user interface (non-GUI), and we prepared web pages for input of the simple measured data and options and a wrapper script which transfers the entered values to the program. The results, analyzed values and plotted graphs from the program are shown in the HTML page and downloadable. Our plot services are provided in http://mage-p.org/mageplot/. In this talk, we introduce our program and service and discuss the philosophy and efficiency of these services.

PRP: a FORTRAN IV interactive plotting program

Science.gov (United States)

Andrew, A. S.; Linde, J.

A computer program, PRP, has been designed to plot any arithmetic combination selected from a set of major and trace element data on a y- x graph. y and x are defined and entered as a program string (y, x) which is interpreted sequentially. Operators ( +, -, ∗, /, ( unary) , square root, log 10, In c, antilog 10, exponential, integer, absolute value, (,),,) and integer or real numbers may be included. Axis lengths and scales are determined by the user. Five different plotting symbols are available.

13 CFR 120.900 - Sources of permanent financing.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Sources of permanent financing... Development Company Loan Program (504) Permanent Financing § 120.900 Sources of permanent financing. Permanent financing for each Project must come from three sources: the Borrower's contribution, Third-Party Loans, and...

Temporary vs. Permanent Sub-slab Ports: A Comparative ...

Science.gov (United States)

Vapor intrusion (VI) is the migration of subsurface vapors, including radon and volatile organic compounds (VOCs), from the subsurface to indoor air. The VI exposure pathway extends from the contaminant source, which can be impacted soil, non-aqueous phase liquid, or contaminated groundwater, to indoor air-exposure points. Therefore, contaminated matrices may include groundwater, soil, soil gas, and indoor air. VOC contaminants of concern typically include halogenated solvents such as trichloroethene, tetrachloroethene, and chloroform, as well as petroleum hydrocarbons, such as the aromatic VOCs benzene, toluene, and xylenes. Radon is a colorless radioactive gas that is released by radioactive decay of radionuclides in rock and soil that migrate into homes through VI in a similar fashion to VOCs. This project focused on the performance of permanent versus temporary sub-slab sampling ports for the determination of VI of halogenated VOCs and radon into an unoccupied house. VOC and radon concentrations measured simultaneously in soil gas using collocated temporary and permanent ports appeared to be independent of the type of port. The variability between collocated temporary and permanent ports was much less than the spatial variability between different locations within a single residential duplex. The agreement of the majority of VOC and radon concentrations, 0–36% relative percent difference, and 2–19% relative standard deviation respectively, of each sub-sl

Analysing spatially extended high-dimensional dynamics by recurrence plots

Energy Technology Data Exchange (ETDEWEB)

Marwan, Norbert, E-mail: marwan@pik-potsdam.de [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Kurths, Jürgen [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Humboldt Universität zu Berlin, Institut für Physik (Germany); Nizhny Novgorod State University, Department of Control Theory, Nizhny Novgorod (Russian Federation); Foerster, Saskia [GFZ German Research Centre for Geosciences, Section 1.4 Remote Sensing, Telegrafenberg, 14473 Potsdam (Germany)

2015-05-08

Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. In this letter we show the potential of selected recurrence plot measures for the investigation of even high-dimensional dynamics. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analysing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world. - Highlights: • We use recurrence plots for analysing partially extended dynamics. • We investigate the high-dimensional chaos of the Lorenz96 model. • The approach distinguishes different spatio-temporal dynamics. • We use the method for studying vegetation cover time series.

[The Object Permanence Fallacy.] Commentary.

Science.gov (United States)

Bradley, Ben S.

1996-01-01

Suggests that Greenberg's challenge to the centrality of object permanence in developmental thinking reveals that developmentalists' theories about childhood speak about their own self-images. Notes that developmentalists have been guilty of not only the object permanence fallacy but also the genetic fallacy, or the mistaken belief that describing…

Surface radiological investigations at environmental research area 11, 137Cs- and 60Co-contaminated plots at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Uziel, M.S.; Tiner, P.F.; Williams, J.K.

1993-02-01

A surface radiological investigation at the 137 Cs- and 6O Co-contaminated forest area (Chestnut Ridge east and west plots) was conducted from January 1992 through August 1992. Results of the survey revealed numerous spots and small areas of surface contamination that followed the original placement of feeders used for 6O Co- and 137 Cs-labeled seeds in a 1969--1970 study. Surface gamma exposure rates reached 380 μR/h at the east plot and 400 μR/h at the west plot, but approximately one-half and one- third, respectively, of the identified anomalies did not exceed 39 μR/h. Results of soil sample analyses demonstrated that 137 Cs and 6O Co were responsible for the elevated radiation levels. Radionuclides were found below the surface at soil sample locations, in some cases at depths below 18 in. The same pattern of subsurface contamination may be present at other elevated surface spots at both plots. These survey results show that current radiological conditions at the site remain an environmental problem. Recommendations for corrective actions are included

Selection of Plot Remeasurement in an Annual Inventory

Science.gov (United States)

Mark H. Hansen; Hans T. Schreuder; Dave Heinzen

2000-01-01

A plot selection approach is proposed based on experience from the Annual Forest Inventory System (AFIS) in the Aspen-Birch Unit of northestern Minnesota. The emphasisis on a mixture of strategies. Although the Agricultural Act of 1998 requires that a fixed 20 percent of plots be measured each year in each state, sooner or later we will need to vary the scheme to...

Linear titration plot for the determination of boron in the primary coolant of a pressurized water reactor

International Nuclear Information System (INIS)

Midgley, D.; Gatford, C.

1992-01-01

A linear titration plot method has been devised for the determination of boron as boric acid in partly neutralized solution, such as occurs in the primary coolant of pressurized water reactors. The total boron and the alkali in the sample are determined simultaneously. Although it is not essential to add mannitol in this method, it is more accurate when the solution is saturated with mannitol. Comparisons are made with other modes of titration: Gran plots, first and second differential potentiometric titrations and indicator titrations. None of these gives the total boron directly in partly neutralized solutions. (author)

Manual transportation within the plot and physical damages to bananas

Directory of Open Access Journals (Sweden)

Magalhães Mário Jorge Maia de

2004-01-01

Full Text Available The manual transportation of banana bunches within plots provokes physical damages to fruits compromising their quality. To assess the influence of the distance banana bunches travel on the shoulders of harvesters within the plot, on the incidence of physical damages present on the peel of fruits of the Nanicão cultivar, two experiments were carried out in the Vale do Ribeira region (SP, in sites with slope < 1%. Each experiment divided the plot in different distance bands, two of which were included in this study: one located far away from the collection roads (30-50 m and 80-100 m distance bands and another in an intermediate position (70-80 m and 130-150 m distance bands. For each distance band, six banana bunches of 36 mm gauged fruits were randomly sampled. Four banana hands were cut from the middle region of each bunch and ten fruits were assessed per hand, totaling 240 fruits per treatment. Bunches were harvested at the same maturity degree and those served as control were not transported. A total of 1440 fruits was assessed in the two experiments. The physical damages on the fruit surface were graded on a scale with 6 divisions: 0-0.25 cm²; 0.25-0.5 cm²; 0.5-1.0 cm²; 1.0-1.5 cm²; 1.5-2.0 cm²; 2.0-2.5 cm². The bunches transported on the shoulders of harvesters on distances over 70 m suffered increased (P < 0.01 damaged area. Most damages presented areas up to 0.5 cm².

Topology optimized permanent magnet systems

Science.gov (United States)

Bjørk, R.; Bahl, C. R. H.; Insinga, A. R.

2017-09-01

Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. The Halbach cylinder is topology optimized with iron and an increase of 15% in magnetic efficiency is shown. A topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111%. Finally, a permanent magnet with alternating high and low field regions is topology optimized and a Λcool figure of merit of 0.472 is reached, which is an increase of 100% compared to a previous optimized design.

SutraPlot, a graphical post-processor for SUTRA, a model for ground-water flow with solute or energy transport

Science.gov (United States)

Souza, W.R.

1999-01-01

This report documents a graphical display post-processor (SutraPlot) for the U.S. Geological Survey Saturated-Unsaturated flow and solute or energy TRAnsport simulation model SUTRA, Version 2D3D.1. This version of SutraPlot is an upgrade to SutraPlot for the 2D-only SUTRA model (Souza, 1987). It has been modified to add 3D functionality, a graphical user interface (GUI), and enhanced graphic output options. Graphical options for 2D SUTRA (2-dimension) simulations include: drawing the 2D finite-element mesh, mesh boundary, and velocity vectors; plots of contours for pressure, saturation, concentration, and temperature within the model region; 2D finite-element based gridding and interpolation; and 2D gridded data export files. Graphical options for 3D SUTRA (3-dimension) simulations include: drawing the 3D finite-element mesh; plots of contours for pressure, saturation, concentration, and temperature in 2D sections of the 3D model region; 3D finite-element based gridding and interpolation; drawing selected regions of velocity vectors (projected on principal coordinate planes); and 3D gridded data export files. Installation instructions and a description of all graphic options are presented. A sample SUTRA problem is described and three step-by-step SutraPlot applications are provided. In addition, the methodology and numerical algorithms for the 2D and 3D finite-element based gridding and interpolation, developed for SutraPlot, are described. 1

Surface stabilization and revegetation test plots

International Nuclear Information System (INIS)

Sackschewsky, M.R.; Kemp, C.J.; Hayward, W.M.

1993-09-01

Westinghouse Hanford Company Decommissioning and Decontamination Engineering Group and Environmental Technology and Assessment Groups are developing new technologies to improve revegetation techniques for interim stabilization control over underground waste sites within the Radiation Area Remedial Action Program. Successful revegetation is an integral aspect of waste isolation strategy. Unfortunately, revegetation can be very difficult to achieve on the Hanford Site due to several factors: low annual precipitation, unpredictable timing of precipitation, low fertility of available soils, and coarse physical texture of soils covering waste sites. The tests in this report were performed during fiscal years 1992 and 1993 and include the use of two soil sealants in combination with bare soil and a soil/compost mixture and a comparison of a wheatgrass mixture and a native seed mixture. Hydroprobe access ports were placed in one-half of the test plots and moisture data was collected. Soil fertility and plant community characteristics were monitored during the two years of the test. During the first year all sites with compost provided additional fertility and retained greater amounts of soil moisture than noncomposted sites. The use of Enduraseal soil fixative provided greater soil moisture than the use of Aerospray-77 soil fixative. During the second year the use of compost and soil fixative's had a lesser effect on soil moisture. During late summer periods all treatments had very similar soil moisture profiles. The use of compost greatly increased vegetative cover and soil fertility in comparison to sites that had no compost added. Testing of the seed mixtures found that Siberian wheatgrass and Sandberg's bluegrass were the most dominant of the seeded species observed. All plots exhibited a dominant plant cover of volunteer cheatgrass. Biomass production was significantly greater on plots with compost than on the noncomposted plots

Teaching Object Permanence: An Action Research Study

Science.gov (United States)

Bruce, Susan M.; Vargas, Claudia

2013-01-01

"Object permanence," also known as "object concept" in the field of visual impairment, is one of the most important early developmental milestones. The achievement of object permanence is associated with the onset of representational thought and language. Object permanence is important to orientation, including the recognition of landmarks.…

Chitosan-based hydrogel tissue scaffolds made by 3D plotting promotes osteoblast proliferation and mineralization.

Science.gov (United States)

Liu, I-Hsin; Chang, Shih-Hsin; Lin, Hsin-Yi

2015-05-13

A 3D plotting system was used to make chitosan-based tissue scaffolds with interconnected pores using pure chitosan (C) and chitosan cross-linked with pectin (CP) and genipin (CG). A freeze-dried chitosan scaffold (CF/D) was made to compare with C, to observe the effects of structural differences. The fiber size, pore size, porosity, compression strength, swelling ratio, drug release efficacy, and cumulative weight loss of the scaffolds were measured. Osteoblasts were cultured on the scaffolds and their proliferation, type I collagen production, alkaline phosphatase activity, calcium deposition, and morphology were observed. C had a lower swelling ratio, degradation, porosity and drug release efficacy and a higher compressional stiffness and cell proliferation compared to CF/D (p 3D-plotted samples, cells on CP exhibited the highest degree of mineralization after 21 d (p 3D-plotted scaffolds were stronger, less likely to degrade and better promoted osteoblast cell proliferation in vitro compared to the freeze-dried scaffolds. C, CP and CG were structurally similar, and the different crosslinking caused significant changes in their physical and biological performances.

The Use of Plackett-Burman Designs to Construct Split Plot Designs.

NARCIS (Netherlands)

Kulahci, M.; Bisgaard, S.

2005-01-01

Abstract When some factors are hard to change and others are relatively easier, split-plot experiments are often an economic alternative to fully randomized designs. Split-plot experiments, with their structure of subplot arrays imbedded within whole-plot arrays, have a tendency to become large,

The confounding effect of population structure on bayesian skyline plot inferences of demographic history

DEFF Research Database (Denmark)

Heller, Rasmus; Chikhi, Lounes; Siegismund, Hans

2013-01-01

Many coalescent-based methods aiming to infer the demographic history of populations assume a single, isolated and panmictic population (i.e. a Wright-Fisher model). While this assumption may be reasonable under many conditions, several recent studies have shown that the results can be misleading...... when it is violated. Among the most widely applied demographic inference methods are Bayesian skyline plots (BSPs), which are used across a range of biological fields. Violations of the panmixia assumption are to be expected in many biological systems, but the consequences for skyline plot inferences...... the best scheme for inferring demographic change over a typical time scale. Analyses of data from a structured African buffalo population demonstrate how BSP results can be strengthened by simulations. We recommend that sample selection should be carefully considered in relation to population structure...

Detecting small-study effects and funnel plot asymmetry in meta-analysis of survival data: A comparison of new and existing tests.

Science.gov (United States)

Debray, Thomas P A; Moons, Karel G M; Riley, Richard D

2018-03-01

Small-study effects are a common threat in systematic reviews and may indicate publication bias. Their existence is often verified by visual inspection of the funnel plot. Formal tests to assess the presence of funnel plot asymmetry typically estimate the association between the reported effect size and their standard error, the total sample size, or the inverse of the total sample size. In this paper, we demonstrate that the application of these tests may be less appropriate in meta-analysis of survival data, where censoring influences statistical significance of the hazard ratio. We subsequently propose 2 new tests that are based on the total number of observed events and adopt a multiplicative variance component. We compare the performance of the various funnel plot asymmetry tests in an extensive simulation study where we varied the true hazard ratio (0.5 to 1), the number of published trials (N=10 to 100), the degree of censoring within trials (0% to 90%), and the mechanism leading to participant dropout (noninformative versus informative). Results demonstrate that previous well-known tests for detecting funnel plot asymmetry suffer from low power or excessive type-I error rates in meta-analysis of survival data, particularly when trials are affected by participant dropout. Because our novel test (adopting estimates of the asymptotic precision as study weights) yields reasonable power and maintains appropriate type-I error rates, we recommend its use to evaluate funnel plot asymmetry in meta-analysis of survival data. The use of funnel plot asymmetry tests should, however, be avoided when there are few trials available for any meta-analysis. © 2017 The Authors. Research Synthesis Methods Published by John Wiley & Sons, Ltd.

Intrusive luxation of 60 permanent incisors

DEFF Research Database (Denmark)

Tsilingaridis, Georgios; Malmgren, Barbro; Andreasen, Jens O

2012-01-01

  Intrusive luxation in the permanent dentition is an uncommon injury but it is considered one of the most severe types of dental trauma because of the risk for damage to the periodontal ligament, pulp and alveolar bone. Management of intrusive luxation in the permanent dentition is controversial....... The purpose of this study was to evaluate pulp survival and periodontal healing in intrusive luxated permanent teeth in relation to treatment alternatives, degree of intrusion and root development....

Measuring larval nematode contamination on cattle pastures: Comparing two herbage sampling methods.

Science.gov (United States)

Verschave, S H; Levecke, B; Duchateau, L; Vercruysse, J; Charlier, J

2015-06-15

Assessing levels of pasture larval contamination is frequently used to study the population dynamics of the free-living stages of parasitic nematodes of livestock. Direct quantification of infective larvae (L3) on herbage is the most applied method to measure pasture larval contamination. However, herbage collection remains labour intensive and there is a lack of studies addressing the variation induced by the sampling method and the required sample size. The aim of this study was (1) to compare two different sampling methods in terms of pasture larval count results and time required to sample, (2) to assess the amount of variation in larval counts at the level of sample plot, pasture and season, respectively and (3) to calculate the required sample size to assess pasture larval contamination with a predefined precision using random plots across pasture. Eight young stock pastures of different commercial dairy herds were sampled in three consecutive seasons during the grazing season (spring, summer and autumn). On each pasture, herbage samples were collected through both a double-crossed W-transect with samples taken every 10 steps (method 1) and four random located plots of 0.16 m(2) with collection of all herbage within the plot (method 2). The average (± standard deviation (SD)) pasture larval contamination using sampling methods 1 and 2 was 325 (± 479) and 305 (± 444)L3/kg dry herbage (DH), respectively. Large discrepancies in pasture larval counts of the same pasture and season were often seen between methods, but no significant difference (P = 0.38) in larval counts between methods was found. Less time was required to collect samples with method 2. This difference in collection time between methods was most pronounced for pastures with a surface area larger than 1 ha. The variation in pasture larval counts from samples generated by random plot sampling was mainly due to the repeated measurements on the same pasture in the same season (residual variance

Permanent magnet materials and their application

International Nuclear Information System (INIS)

Campbell, P.

1994-01-01

Permanent magnets are of great industrial importance in industrial drives, consumer products, computers, and automobiles. Since 1970, new classes of magnet materials have been developed. This book reviews the older and newer materials and is presented as a comprehensive design text for permanent magnets and their applications. After an initial chapter on the fundamentals of magnetism, the author discusses magnetic physics considerations specific to permanent magnets and describes the fabrications and characteristics of commercial materials: alnico, samarium-cobalt, ferrite, and neodymium-iron-boron. Thermal stability, magnet design procedures, magnetic field analysis methods, and measurement methods are discussed in subsequent chapters, followed by a concluding chapter reviewing commercial and industrial products that use permanent magnets. The chapter on thermal properties of magnet materials is of particular interest, bringing together information not readily found elsewhere. The review of applications is also deserving of attention, specifically the sections on motors and actuators. Although particle accelerator applications are discussed, the use of permanent magnet sextuples in modern ECR ion sources is not mentioned

Checking the Adequacy of Fit of Models from Split-Plot Designs

DEFF Research Database (Denmark)

Almini, A. A.; Kulahci, Murat; Montgomery, D. C.

2009-01-01

models. In this article, we propose the computation of two R-2, R-2-adjusted, prediction error sums of squares (PRESS), and R-2-prediction statistics to measure the adequacy of fit for the WP and the SP submodels in a split-plot design. This is complemented with the graphical analysis of the two types......One of the main features that distinguish split-plot experiments from other experiments is that they involve two types of experimental errors: the whole-plot (WP) error and the subplot (SP) error. Taking this into consideration is very important when computing measures of adequacy of fit for split-plot...... of errors to check for any violation of the underlying assumptions and the adequacy of fit of split-plot models. Using examples, we show how computing two measures of model adequacy of fit for each split-plot design model is appropriate and useful as they reveal whether the correct WP and SP effects have...

How much information is contained in a recurrence plot?

International Nuclear Information System (INIS)

Thiel, Marco; Romano, M. Carmen; Kurths, Juergen

2004-01-01

Recurrence plots have recently been recognized as a powerful tool for the analysis of data. Not only the visualization of structures of the time series but also the possibility to estimate invariants from them and the possibility to analyze non-stationary data sets are remarkable. However, the question of how much information is encoded in such a two-dimensional and binary representation has not been discussed so far. In this Letter we show that - under some conditions - it is possible to reconstruct an attractor from the recurrence plot, at least topologically. This means that all relevant dynamical information is contained in the plot

TAURUS, Post-processor of 3-D Finite Elements Plots

International Nuclear Information System (INIS)

Brown, B.E.; Hallquist, J.O.; Kennedy, T.

2002-01-01

Description of program or function: TAURUS reads the binary plot files generated by the LLNL three-dimensional finite element analysis codes, NIKE3D (NESC 9725), DYNA3D (NESC 9909), TACO3D (NESC 9838), TOPAZ3D (NESC9599) and GEMINI and plots contours, time histories, and deformed shapes. Contours of a large number of quantities may be plotted on meshes consisting of plate, shell, and solid type elements. TAURUS can compute a variety of strain measures, reaction forces along constrained boundaries, and momentum. TAURUS has three phases: initialization, geometry display with contouring, and time history processing

9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Revision of plot plans, blueprints... FACILITY REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.6 Revision of plot plans, blueprints, and legends... changes affecting the workflow are to be made. The licensee shall: (a) Prepare revised plot plans...

Generalised recurrence plot analysis for spatial data

International Nuclear Information System (INIS)

Marwan, Norbert; Kurths, Juergen; Saparin, Peter

2007-01-01

Recurrence plot based methods are highly efficient and widely accepted tools for the investigation of time series or one-dimensional data. We present an extension of the recurrence plots and their quantifications in order to study recurrent structures in higher-dimensional spatial data. The capability of this extension is illustrated on prototypical 2D models. Next, the tested and proved approach is applied to assess the bone structure from CT images of human proximal tibia. We find that the spatial structures in trabecular bone become more recurrent during the bone loss in osteoporosis

D.3.3 PLOT Persuasive Learning Design Framework

DEFF Research Database (Denmark)

Gram-Hansen, Sandra Burri

2012-01-01

In this third and final deliverable of WP3: Persuasive Learning Designs, the theoretical cross field between persuasion and learning and the practical analysis of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool......, are linked together as persuasive learning designs are defined and exemplified through the four e-PLOT cases. Based on the literary study of D.3.1 as well as the subsequent discussions and reflections regarding the theoretical foundation and practical application of persuasive learning technologies......-PLOT work cases. In conclusion, the report presents a number of suggestions regarding the improvement of the two learning tools, which from a theoretical perspective will enhance the persuasive potential, and which can be taken into consideration in WP4 and 5....

9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Filing of plot plans, blueprints, and... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.7 Filing of plot plans, blueprints, and legends. Three copies of all plot plans, blueprints, and legends, including revisions, shall be submitted to Animal and Plant...

VAM populations in relation to grass invasion associated with forest decline.

Science.gov (United States)

Vosatka, M; Cudlin, P; Mejstrik, V

1991-01-01

Spruce stands in Northern Bohemia forests, damaged to various degrees by industrial pollution, have shown establishment of grass cover following tree defoliation. Populations of vesicular-arbuscular mycorrhizal (VAM) fungi were studied under this grass cover in four permanent plots with spruce under different levels of pollution stress. Soil and root samples were collected in April and June within each plot as follows: (1) sites without grass, (2) sites with initial stages of grass invasion, and (3) sites with fully developed grass cover. In all plots, the highest number of propagules were recovered from samples taken from sites having full grass cover. Mycorrhizal infection of grass was highest in the plot with the severest pollution damage and lowest in the least damaged plot. The development of grass cover and VAM infection of grass increased with tree defoliation caused by air pollution.

Model-independent plot of dynamic PET data facilitates data interpretation and model selection.

Science.gov (United States)

Munk, Ole Lajord

2012-02-21

When testing new PET radiotracers or new applications of existing tracers, the blood-tissue exchange and the metabolism need to be examined. However, conventional plots of measured time-activity curves from dynamic PET do not reveal the inherent kinetic information. A novel model-independent volume-influx plot (vi-plot) was developed and validated. The new vi-plot shows the time course of the instantaneous distribution volume and the instantaneous influx rate. The vi-plot visualises physiological information that facilitates model selection and it reveals when a quasi-steady state is reached, which is a prerequisite for the use of the graphical analyses by Logan and Gjedde-Patlak. Both axes of the vi-plot have direct physiological interpretation, and the plot shows kinetic parameter in close agreement with estimates obtained by non-linear kinetic modelling. The vi-plot is equally useful for analyses of PET data based on a plasma input function or a reference region input function. The vi-plot is a model-independent and informative plot for data exploration that facilitates the selection of an appropriate method for data analysis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Atrial fibrillation detection by heart rate variability in Poincare plot.

Science.gov (United States)

Park, Jinho; Lee, Sangwook; Jeon, Moongu

2009-12-11

Atrial fibrillation (AFib) is one of the prominent causes of stroke, and its risk increases with age. We need to detect AFib correctly as early as possible to avoid medical disaster because it is likely to proceed into a more serious form in short time. If we can make a portable AFib monitoring system, it will be helpful to many old people because we cannot predict when a patient will have a spasm of AFib. We analyzed heart beat variability from inter-beat intervals obtained by a wavelet-based detector. We made a Poincare plot using the inter-beat intervals. By analyzing the plot, we extracted three feature measures characterizing AFib and non-AFib: the number of clusters, mean stepping increment of inter-beat intervals, and dispersion of the points around a diagonal line in the plot. We divided distribution of the number of clusters into two and calculated mean value of the lower part by k-means clustering method. We classified data whose number of clusters is more than one and less than this mean value as non-AFib data. In the other case, we tried to discriminate AFib from non-AFib using support vector machine with the other feature measures: the mean stepping increment and dispersion of the points in the Poincare plot. We found that Poincare plot from non-AFib data showed some pattern, while the plot from AFib data showed irregularly irregular shape. In case of non-AFib data, the definite pattern in the plot manifested itself with some limited number of clusters or closely packed one cluster. In case of AFib data, the number of clusters in the plot was one or too many. We evaluated the accuracy using leave-one-out cross-validation. Mean sensitivity and mean specificity were 91.4% and 92.9% respectively. Because pulse beats of ventricles are less likely to be influenced by baseline wandering and noise, we used the inter-beat intervals to diagnose AFib. We visually displayed regularity of the inter-beat intervals by way of Poincare plot. We tried to design an

Quasi permanent superconducting magnet of very high field

Science.gov (United States)

Ren, Y.; Liu, J.; Weinstein, R.; Chen, I. G.; Parks, D.; Xu, J.; Obot, V.; Foster, C.

1993-01-01

We report on persistent field in a quasi-permanent magnet made of high temperature superconductor. The material has an average of 40 percent molar excess of Y, relative to Y1Ba2Cu3O7 and has been irradiated with high energy light ions at 200 MeV. The magnet, which traps 1.52 T at 77.3 K, traps nearly 4 T at 64.5 K. No evidence of giant flux jump or sample cracking was observed.

Local Magnetic Measurements of Trapped Flux Through a Permanent Current Path in Graphite

Science.gov (United States)

Stiller, Markus; Esquinazi, Pablo D.; Quiquia, José Barzola; Precker, Christian E.

2018-04-01

Temperature- and field-dependent measurements of the electrical resistance of different natural graphite samples suggest the existence of superconductivity at room temperature in some regions of the samples. To verify whether dissipationless electrical currents are responsible for the trapped magnetic flux inferred from electrical resistance measurements, we localized them using magnetic force microscopy on a natural graphite sample in remanent state after applying a magnetic field. The obtained evidence indicates that at room temperature a permanent current flows at the border of the trapped flux region. The current path vanishes at the same transition temperature T_c≈ 370 K as the one obtained from electrical resistance measurements on the same sample. This sudden decrease in the phase is different from what is expected for a ferromagnetic material. Time-dependent measurements of the signal show the typical behavior of flux creep of a permanent current flowing in a superconductor. The overall results support the existence of room-temperature superconductivity at certain regions in the graphite structure and indicate that magnetic force microscopy is suitable to localize them. Magnetic coupling is excluded as origin of the observed phase signal.

Cylindrical Hall Thrusters with Permanent Magnets

International Nuclear Information System (INIS)

Raitses, Yevgeny; Merino, Enrique; Fisch, Nathaniel J.

2010-01-01

The use of permanent magnets instead of electromagnet coils for low power Hall thrusters can offer a significant reduction of both the total electric power consumption and the thruster mass. Two permanent magnet versions of the miniaturized cylindrical Hall thruster (CHT) of different overall dimensions were operated in the power range of 50W-300 W. The discharge and plasma plume measurements revealed that the CHT thrusters with permanent magnets and electromagnet coils operate rather differently. In particular, the angular ion current density distribution from the permanent magnet thrusters has an unusual halo shape, with a majority of high energy ions flowing at large angles with respect to the thruster centerline. Differences in the magnetic field topology outside the thruster channel and in the vicinity of the channel exit are likely responsible for the differences in the plume characteristics measured for the CHTs with electromagnets and permanent magnets. It is shown that the presence of the reversing-direction or cusp-type magnetic field configuration inside the thruster channel without a strong axial magnetic field outside the thruster channel does not lead to the halo plasma plume from the CHT.

Macroscopic simulation of isotropic permanent magnets

International Nuclear Information System (INIS)

Bruckner, Florian; Abert, Claas; Vogler, Christoph; Heinrichs, Frank; Satz, Armin; Ausserlechner, Udo; Binder, Gernot; Koeck, Helmut; Suess, Dieter

2016-01-01

Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemented on top of existing finite element methods and does not require a full characterization of the hysteresis of the magnetic material. Strayfield measurements of an isotropic permanent magnet and simulation results are in good agreement and highlight the importance of a proper description of the isotropic material. - Highlights: • Simulations of isotropic permanent magnets. • Accurate calculation of remanence magnetization and strayfield. • Comparison with strayfield measurements and anisotropic magnet simulations. • Efficient 3D FEM–BEM coupling for solution of Maxwell equations.

Lodgepole pine site index in relation to synoptic measures of climate, soil moisture and soil nutrients.

Science.gov (United States)

G. Geoff Wang; Shongming Huang; Robert A. Monserud; Ryan J. Klos

2004-01-01

Lodgepole pine site index was examined in relation to synoptic measures of topography, soil moisture, and soil nutrients in Alberta. Data came from 214 lodgepole pine-dominated stands sampled as a part of the provincial permanent sample plot program. Spatial location (elevation, latitude, and longitude) and natural subregions (NSRs) were topographic variables that...

An ecoinformatics application for forest dynamics plot data management and sharing

Science.gov (United States)

Chau-Chin Lin; Abd Rahman Kassim; Kristin Vanderbilt; Donald Henshaw; Eda C. Melendez-Colom; John H. Porter; Kaoru Niiyama; Tsutomu Yagihashi; Sek Aun Tan; Sheng-Shan Lu; Chi-Wen Hsiao; Li-Wan Chang; Meei-Ru. Jeng

2011-01-01

Several forest dynamics plot research projects in the East-Asia Pacific region of the International Long-Term Ecological Research network actively collect long-term data, and some of these large plots are members of the Center for Tropical Forest Science network. The wealth of forest plot data presents challenges in information management to researchers. In order to...

Reactor safety review of permanent changes

International Nuclear Information System (INIS)

Lam, K.F.

1997-01-01

Operational compliance engineers review all changes as part of a change control process. Each change, permanent or temporary, is required to undergo an intricate review process to ensure that the benefits associated with the change outweigh the risk. For permanent changes, it is necessary to ensure that the proposed design meets the nuclear safety requirements, conforms to the licensing requirements and complies with regulatory requirements. In addition, during installation of the permanent change and prior to in-service, a configuration management process is in place to align the change with operating and maintenance documents. (author)

Permanent multipole magnets with adjustable strength

International Nuclear Information System (INIS)

Halbach, K.

1983-01-01

Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrople will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

Nanocrystalline permanent magnets with enhanced properties

International Nuclear Information System (INIS)

Leonowicz, M.

2002-01-01

Parameters of permanent magnets result from the combination of intrinsic properties such as saturation magnetization, magnetic exchange, and magnetocrystalline energy, as well as microstructural parameters such as phase structure, grain size, and orientation. Reduction of grain size into nanocrystalline regime (∼ 50 nm) leads to the enhanced remanence which derives from ferromagnetic exchange coupling between highly refined grains. In this study the fundamental phenomena, quantities, and structure parameters, which define nanophase permanent magnets are presented and discussed. The theoretical considerations are confronted with experimental data for nanocrystalline Sm-Fe-N type permanent magnets. (author)

Permanent multipole magnets with adjustable strength

International Nuclear Information System (INIS)

Halbach, K.

1983-03-01

Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrupole will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

[Correlation between the lower first permanent molar axis and the premature loss of temporary molars].

Science.gov (United States)

Petcu, Ana; Maxim, A; Haba, Danisia

2009-01-01

The aim of our study was to determine the impact of premature loss of temporary molars upon the longitudinal axis of the first permanent molar. The study sample was formed by 94 orthopanthomografies of child patients with premature loss of lower temporary molars (first or second) after clinical eruption of the first permanent molar. All panoramic radiographs have been realized with the same panoramic unit with 1.4% magnification coefficient and were analyzed using a standardized technique of tracing the images of teeth and bone on matte acetate paper. It was evaluated the angle between longitudinal axis of first permanent lower molar and occlusal plane. It was observed that premature loss of lower second deciduous molar modifies greater the vertical axis of first permanent molar (between 61 degrees and 79 degrees) then premature loss of first lower primary molar. This is perhaps because the loss of space in the case of premature exfoliation of first primary molar is due more to distal drift of canine then mesial drift of molars. The drift to mesial of first permanent molar is more accentuated proportional with the age at which appeared premature loss and so it is loss of leeway space.

The role of forest type in the variability of DOC in atmospheric deposition at forest plots in Italy.

Science.gov (United States)

Arisci, S; Rogora, M; Marchetto, A; Dichiaro, F

2012-06-01

Dissolved organic carbon (DOC) was studied in atmospheric deposition samples collected on a weekly basis in 2005-2009 at 10 forest plots in Italy. The plots covered a wide range of geographical attributes and were representative of the main forest types in Italy. Both spatial and temporal variations in DOC concentrations and fluxes are discussed, with the aim of identifying the main factors affecting DOC variability. DOC concentration increased from bulk to throughfall and stemflow water samples at all sites, as an effect of leaching from leaves and branches, going from 0.7-1.7 mg C L(-1) in bulk samples to 1.8-15.8 mg C L(-1) in throughfall and 4.2-10.7 mg C L(-1) in stemflow, with striking differences among the various plots. Low concentrations were found in runoff (0.5-2.0 mg C L(-1)), showing that the export of DOC via running waters was limited. The seasonality of DOC in throughfall samples was evident, with the highest concentration in summer when biological activity is at a maximum, and minima in winter due to limited DOC production and leaching. Statistical analysis revealed that DOC had a close relationship with organic and total nitrogen, and with nutrient ions, and a negative correlation with precipitation amount. Forest type proved to be a major factor affecting DOC variability: concentration and, to a lesser extent, fluxes were lower in stands dominated by deciduous species. The character of evergreens, and the size and shape of their leaves and needles, which regulate the interception mechanism of dry deposition, are mainly responsible for this.

Synovial fluid white cell count and histopathological examination of periprosthetic tissue samples (frozen and permanent sections in the diagnosis of prosthetic knee infection

Directory of Open Access Journals (Sweden)

Obada B.

2017-02-01

Full Text Available The aim of the study was to determine prospectively the importance of synovial fluid white cell count and intraoperative frozen and permanent sections analysis (number of polymorphonuclear leukocytes per high-power field in the diagnosis of septic total knee arthroplasty. There were studied prospectively 72 patients who needed a revision total knee arthroplasty between 2013-2015. 30 patients were diagnosed with prosthetic joint infection due to high rates of ESR (93% and CRP (90% and preoperative positive culture from aspirated synovial fluid and 42 patients were considered to have aseptic failure according to negative preoperative culture from joint aspirate. For all the patients was analysed synovial fluid white cell count and histopathological aspect of intraoperative frozen and permanent sections of periprosthetic tissue. The results showed a median value of 13800 of sinovial white cells count for infected knee and 92 for noninfected knee. 90% of the patients with joint infection had more than 5 polymorphonuclear leukocytes per high power field on intraoperative frozen sections and 83% on permanent sections. None of the patients from aseptic group had more than 5 polymorphonuclear leukocytes per field on permanent sections. The erythrocyte sedimentation rate and C-reactive protein level can be supplemented with cultures of aspirated joint fluid and fluid white cell count to confirm the diagnosis of periprosthetic infection. When the preoperative diagnosis remain unclear, the histological examination of frozen or permanent sections of periprosthetic tissue with at least 5 polymorphonuclear leukocytes per high power field, is predictive for the presence of infection.

Measurements of the effectiveness of conservation agriculture at the field scale using radioisotopic techniques and runoff plots

Science.gov (United States)

Mabit, L.; Klik, A.; Toloza, A.; Benmansour, M.; Geisler, A.; Gerstmann, U. C.

2009-04-01

Growing evidence of the cost of soil erosion on agricultural land and off site impact of associated processes has emphasized the needs for quantitative assessment of erosion rates to develop and assess erosion control technology and to allocate conservation resources and development of conservation regulation, policies and programmes. Our main study goal was to assess the magnitude of deposition rates using Fallout Radionuclides ‘FRNs' (137-Cs and 210-Pb) and the mid-term (13 years) erosion rates using conventional runoff plot measurements in a small agricultural watershed under conventional and conservation tillage practices. The tillage treatments were conventional tillage system (CT), mechanical plough to 30 cm depth (the most common tillage system within the watershed); conservation tillage (CS) with cover crops during winter; and direct seeding (DS) no tillage with cover crops during winter. The experimental design - located in Mistelbach watershed 60 km north of Vienna/Austria - consists of one 3-metre-wide and 15-metre-long runoff plot (silt loam - slope of 14%) for each tillage system (CT, CS and DS) with the plots placed in the upper part of an agricultural field. 76 soil samples were collected to evaluate the initial fallout of 137-Cs and 210-Pb in a small forested area close to the experimental field, along a systematic multi-grid design,. In the sedimentation area of the watershed and down slope the agricultural field, 2 additional soil profiles were collected to 1 m depth. All soil samples were air dried, sieved to 2mm and analysed for their 137-Cs and 210-Pb contents using gamma detector. The main results and conclusion can be summarised as following: i) The initial 137-Cs fallout as measured in the 76 forested soil samples ranged from 1123 to 3354 Bq/m2 for an average of 1954 Bq/m2 with a coefficient of variation of 20.4 %. ii) Long-term erosion measurements (1994-2006) from runoff plots located in the upper part of the agricultural field just up

Introduction to permanent magnets

International Nuclear Information System (INIS)

Zijlstra, H.

1985-01-01

Some general considerations concerning the application of permanent magnets are developed. The relevant magnet properties are discussed, with particular reference to Nd-Fe-B alloy. The author comes to the following conclusions; the air gap field B should be high, for high electrical efficiency; the magnet should face the air gap, for efficient use of the magnet material; the magnet material should therefore have a high remanence; and the new Nd-Fe-B magnet fits in nicely, having (potentially) the highest remanence ever reported in permanent magnets, combined with sufficient coercivity to sustain it

Use of experimental plots for assessing Chernobyl-derived fallout of 137CS in France

International Nuclear Information System (INIS)

Bonte, Ph.; Sogon, S.; Bourgeois, S.; Terce, M.; Morel, Ch.

2004-01-01

Caesium-137 ( 137 Cs) is widely used for the determination of soil erosion and sedimentation rates. However, in Europe, if the additional inputs of 137 Cs fallout associated with the Chernobyl accident have given a supplementary mark to know the chronological history of buried sediments in rivers or wetlands, they have considerably complicated the interpretation of 137 Cs inventories used for estimating soil redistribution on slopes. In fact, determination of Chernobyl-derived fallout 137 Cs is problematic because very few sites have been correctly sampled at the moment of the accident. During the ten years after, it was possible to estimate the fallout measuring the 134 Cs activity for estimating 137 Cs ( 137 Cs / 134 Cs 2.0 at the time of the accident). But these measurements are extremely rare, whereas it should be the more accurate method to resolve this question. The more used solution is to use model based on atmospheric circulation and rain precipitation, the main part of fallout been due to atmospheric washing by the rain. Other solution is to compare 137 Cs specific activity of soil samples collected after the accident and older samples. Then, we choose a set of soil samples collected on several experimental plots at different places in France, and sampled before and after the Chernobyl accident, to determine the part of contamination linked to this 137 Cs fallout event with a simple comparison of their 137 Cs specific activity. In fact, national French institutes working on agronomy maintain experimental plots, with varied surface area (1 m 2 10 m 2 or larger), for monitoring of soil physics and chemistry evolution. Nine sites were studied: two of them close to Paris, one 100 km east of Paris, 3 in Loire basin and 3 in south west, in the Pyrenees Atlantic. These measurements confirm the influence of the Chernobyl radioactive plume over the Paris Basin concerning the 137 Cs fallout. The 137 Cs specific activity is, on average, 25% (from 18 to 35% at

Hanford Permanent Isolation Barrier Program: Asphalt technology development

International Nuclear Information System (INIS)

Freeman, H.D.; Romine, R.A.

1994-11-01

An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt's potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions

Permanent education

International Nuclear Information System (INIS)

Gardien, S.; Kirsch, R.

1998-01-01

The permanent education of the IPN-Lyon inscribes itself completely in the priorities of the tri-annual plan of education of CNRS. These priorities contribute to evolution of research, evaluation of the professions, integration during the professional carriers of the personnel and form the frame for new management practice implementation

Transient or permanent fisheye views

DEFF Research Database (Denmark)

Jakobsen, Mikkel Rønne; Hornbæk, Kasper

2012-01-01

Transient use of information visualization may support specific tasks without permanently changing the user interface. Transient visualizations provide immediate and transient use of information visualization close to and in the context of the user’s focus of attention. Little is known, however......, about the benefits and limitations of transient visualizations. We describe an experiment that compares the usability of a fisheye view that participants could call up temporarily, a permanent fisheye view, and a linear view: all interfaces gave access to source code in the editor of a widespread...... programming environment. Fourteen participants performed varied tasks involving navigation and understanding of source code. Participants used the three interfaces for between four and six hours in all. Time and accuracy measures were inconclusive, but subjective data showed a preference for the permanent...

Permanent molars: Delayed development and eruption

Directory of Open Access Journals (Sweden)

Arathi R

2006-05-01

Full Text Available Delayed development and eruption of all the permanent molars is a rare phenomenon, which can cause disturbance in the developing occlusion. The eruption of permanent first and second molars is very important for the coordination of facial growth and for providing sufficient occlusal support for undisturbed mastication. In the case described, the first permanent molars were delayed in their development and were seen erupting at the age of nine and a half years. Severe disparity between the left and the right side of the dentition with respect to the rate of development of molars were also present.

Fitting diameter distribution models to data from forest inventories with concentric plot design

Energy Technology Data Exchange (ETDEWEB)

Nanos, N.; Sjöstedt de Luna, S.

2017-11-01

Aim: Several national forest inventories use a complex plot design based on multiple concentric subplots where smaller diameter trees are inventoried when lying in the smaller-radius subplots and ignored otherwise. Data from these plots are truncated with threshold (truncation) diameters varying according to the distance from the plot centre. In this paper we designed a maximum likelihood method to fit the Weibull diameter distribution to data from concentric plots. Material and methods: Our method (M1) was based on multiple truncated probability density functions to build the likelihood. In addition, we used an alternative method (M2) presented recently. We used methods M1 and M2 as well as two other reference methods to estimate the Weibull parameters in 40000 simulated plots. The spatial tree pattern of the simulated plots was generated using four models of spatial point patterns. Two error indices were used to assess the relative performance of M1 and M2 in estimating relevant stand-level variables. In addition, we estimated the Quadratic Mean plot Diameter (QMD) using Expansion Factors (EFs). Main results: Methods M1 and M2 produced comparable estimation errors in random and cluster tree spatial patterns. Method M2 produced biased parameter estimates in plots with inhomogeneous Poisson patterns. Estimation of QMD using EFs produced biased results in plots within inhomogeneous intensity Poisson patterns. Research highlights:We designed a new method to fit the Weibull distribution to forest inventory data from concentric plots that achieves high accuracy and precision in parameter estimates regardless of the within-plot spatial tree pattern.

Cross-plotting of rock properties for fluid discrimination using well ...

African Journals Online (AJOL)

properties and their attributes (combination of rock properties) cross-plots have been attempted using well data from an offshore field of the Niger Delta as a case study. Numerous cross-plotting techniques of rock- properties/attributes derived from ...

E691 Dalitz plot analysis of Λc+ → pK-π+ decays

International Nuclear Information System (INIS)

Cremaldi, L.

1992-01-01

The resonant decays of the Λ c + can give insight into the weak decay mechanism of this charmed baryon. We have performed a Dalitz plot analysis of the final state for a clean sample Λ c + → pK - π + decays observed in photoproduction experiment E691 at Fermilab. We measure Γ(pK*(892)degrees)/Γ (pK - π + ) = .35 ± .09 ± .07. We also observe an unexpected enhancement at low pK- invariant mass

Plot-scale field experiment of surface hydrologic processes with EOS implications

Science.gov (United States)

Laymon, Charles A.; Macari, Emir J.; Costes, Nicholas C.

1992-01-01

Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes, particularly as affected by vegetation, and b) develop experimental techniques and associated instrumentation methodology to study hydrologic processes at increasingly large spatial scales. About 150 instruments, most of which are remotely operated, have been installed at the field site to monitor ground atmospheric conditions, precipitation, interception, soil-water status, and energy flux. This paper describes the nature of the field experiment, instrumentation and sampling rationale, and presents preliminary findings.

Evaluating uncertainty in 7Be-based soil erosion estimates: an experimental plot approach

Science.gov (United States)

Blake, Will; Taylor, Alex; Abdelli, Wahid; Gaspar, Leticia; Barri, Bashar Al; Ryken, Nick; Mabit, Lionel

2014-05-01

Soil erosion remains a major concern for the international community and there is a growing need to improve the sustainability of agriculture to support future food security. High resolution soil erosion data are a fundamental requirement for underpinning soil conservation and management strategies but representative data on soil erosion rates are difficult to achieve by conventional means without interfering with farming practice and hence compromising the representativeness of results. Fallout radionuclide (FRN) tracer technology offers a solution since FRN tracers are delivered to the soil surface by natural processes and, where irreversible binding can be demonstrated, redistributed in association with soil particles. While much work has demonstrated the potential of short-lived 7Be (half-life 53 days), particularly in quantification of short-term inter-rill erosion, less attention has focussed on sources of uncertainty in derived erosion measurements and sampling strategies to minimise these. This poster outlines and discusses potential sources of uncertainty in 7Be-based soil erosion estimates and the experimental design considerations taken to quantify these in the context of a plot-scale validation experiment. Traditionally, gamma counting statistics have been the main element of uncertainty propagated and reported but recent work has shown that other factors may be more important such as: (i) spatial variability in the relaxation mass depth that describes the shape of the 7Be depth distribution for an uneroded point; (ii) spatial variability in fallout (linked to rainfall patterns and shadowing) over both reference site and plot; (iii) particle size sorting effects; (iv) preferential mobility of fallout over active runoff contributing areas. To explore these aspects in more detail, a plot of 4 x 35 m was ploughed and tilled to create a bare, sloped soil surface at the beginning of winter 2013/2014 in southwest UK. The lower edge of the plot was bounded by

Combining dendrochronology and matrix modelling in demographic studies: An evaluation for Juniperus procera in Ethiopia

NARCIS (Netherlands)

Couralet, C.; Sass, U.G.W.; Sterck, F.J.; Zuidema, P.A.

2005-01-01

Tree demography was analysed by applying dendrochronological techniques and matrix modelling on a static data set of Juniperus procera populations of Ethiopian dry highland forests. Six permanent sample plots were established for an inventory of diameters and 11 stem discs were collected for

A technique to identify annual growth rings in Eucalyptus grandis using annual measurements of diameter at breast height and gamma ray densitometry

CSIR Research Space (South Africa)

Naidoo, Sasha

2010-06-01

Full Text Available A technique was developed to identify annual growth rings in E. grandis using a combination of annual measurements of diameter at breast height (DBH) from permanent sample plot (PSP) datasets and bark-pith density profiles. By assessing the pattern...

Improving LiDAR Biomass Model Uncertainty through Non-Destructive Allometry and Plot-level 3D Reconstruction with Terrestrial Laser Scanning

Science.gov (United States)

Stovall, A. E.; Shugart, H. H., Jr.

2017-12-01

Future NASA and ESA satellite missions plan to better quantify global carbon through detailed observations of forest structure, but ultimately rely on uncertain ground measurement approaches for calibration and validation. A significant amount of the uncertainty in estimating plot-level biomass can be attributed to inadequate and unrepresentative allometric relationships used to convert plot-level tree measurements to estimates of aboveground biomass. These allometric equations are known to have high errors and biases, particularly in carbon rich forests because they were calibrated with small and often biased samples of destructively harvested trees. To overcome this issue, a non-destructive methodology for estimating tree and plot-level biomass has been proposed through the use of Terrestrial Laser Scanning (TLS). We investigated the potential for using TLS as a ground validation approach in LiDAR-based biomass mapping though virtual plot-level tree volume reconstruction and biomass estimation. Plot-level biomass estimates were compared on the Virginia-based Smithsonian Conservation Biology Institute's SIGEO forest with full 3D reconstruction, TLS allometry, and Jenkins et al. (2003) allometry. On average, full 3D reconstruction ultimately provided the lowest uncertainty estimate of plot-level biomass (9.6%), followed by TLS allometry (16.9%) and the national equations (20.2%). TLS offered modest improvements to the airborne LiDAR empirical models, reducing RMSE from 16.2% to 14%. Our findings suggest TLS plot acquisitions and non-destructive allometry can play a vital role for reducing uncertainty in calibration and validation data for biomass mapping in the upcoming NASA and ESA missions.

[Heart rate variability study based on a novel RdR RR Intervals Scatter Plot].

Science.gov (United States)

Lu, Hongwei; Lu, Xiuyun; Wang, Chunfang; Hua, Youyuan; Tian, Jiajia; Liu, Shihai

2014-08-01

On the basis of Poincare scatter plot and first order difference scatter plot, a novel heart rate variability (HRV) analysis method based on scatter plots of RR intervals and first order difference of RR intervals (namely, RdR) was proposed. The abscissa of the RdR scatter plot, the x-axis, is RR intervals and the ordinate, y-axis, is the difference between successive RR intervals. The RdR scatter plot includes the information of RR intervals and the difference between successive RR intervals, which captures more HRV information. By RdR scatter plot analysis of some records of MIT-BIH arrhythmias database, we found that the scatter plot of uncoupled premature ventricular contraction (PVC), coupled ventricular bigeminy and ventricular trigeminy PVC had specific graphic characteristics. The RdR scatter plot method has higher detecting performance than the Poincare scatter plot method, and simpler and more intuitive than the first order difference method.

Flyby Error Analysis Based on Contour Plots for the Cassini Tour

Science.gov (United States)

Stumpf, P. W.; Gist, E. M.; Goodson, T. D.; Hahn, Y.; Wagner, S. V.; Williams, P. N.

2008-01-01

The maneuver cancellation analysis consists of cost contour plots employed by the Cassini maneuver team. The plots are two-dimensional linear representations of a larger six-dimensional solution to a multi-maneuver, multi-encounter mission at Saturn. By using contours plotted with the dot product of vectors B and R and the dot product of vectors B and T components, it is possible to view the effects delta V on for various encounter positions in the B-plane. The plot is used in operations to help determine if the Approach Maneuver (ensuing encounter minus three days) and/or the Cleanup Maneuver (ensuing encounter plus three days) can be cancelled and also is a linear check of an integrated solution.

Permanent-magnet energy spectrometer for electron beams from radiotherapy accelerators

Energy Technology Data Exchange (ETDEWEB)

McLaughlin, David J.; Shikhaliev, Polad M.; Matthews, Kenneth L. [Department of Physics and Astronomy, Louisiana State University, 202 Nicholson Hall, Baton Rouge, Louisiana 70803-4001 (United States); Hogstrom, Kenneth R., E-mail: hogstrom@lsu.edu; Carver, Robert L.; Gibbons, John P. [Mary Bird Perkins Cancer Center, 4950 Essen Lane, Baton Rouge, Louisiana 70809-3482 and Department of Physics and Astronomy, Louisiana State University, 202 Nicholson Hall, Baton Rouge, Louisiana 70803-4001 (United States); Clarke, Taylor; Henderson, Alexander; Liang, Edison P. [Physics and Astronomy Department, Rice University, 6100 Main MS-61, Houston, Texas 77005-1827 (United States)

2015-09-15

Purpose: The purpose of this work was to adapt a lightweight, permanent magnet electron energy spectrometer for the measurement of energy spectra of therapeutic electron beams. Methods: An irradiation geometry and measurement technique were developed for an approximately 0.54-T, permanent dipole magnet spectrometer to produce suitable latent images on computed radiography (CR) phosphor strips. Dual-pinhole electron collimators created a 0.318-cm diameter, approximately parallel beam incident on the spectrometer and an appropriate dose rate at the image plane (CR strip location). X-ray background in the latent image, reduced by a 7.62-cm thick lead block between the pinhole collimators, was removed using a fitting technique. Theoretical energy-dependent detector response functions (DRFs) were used in an iterative technique to transform CR strip net mean dose profiles into energy spectra on central axis at the entrance to the spectrometer. These spectra were transformed to spectra at 95-cm source to collimator distance (SCD) by correcting for the energy dependence of electron scatter. The spectrometer was calibrated by comparing peak mean positions in the net mean dose profiles, initially to peak mean energies determined from the practical range of central-axis percent depth-dose (%DD) curves, and then to peak mean energies that accounted for how the collimation modified the energy spectra (recalibration). The utility of the spectrometer was demonstrated by measuring the energy spectra for the seven electron beams (7–20 MeV) of an Elekta Infinity radiotherapy accelerator. Results: Plots of DRF illustrated their dependence on energy and position in the imaging plane. Approximately 15 iterations solved for the energy spectra at the spectrometer entrance from the measured net mean dose profiles. Transforming those spectra into ones at 95-cm SCD increased the low energy tail of the spectra, while correspondingly decreasing the peaks and shifting them to slightly lower

Permanent-magnet energy spectrometer for electron beams from radiotherapy accelerators.

Science.gov (United States)

McLaughlin, David J; Hogstrom, Kenneth R; Carver, Robert L; Gibbons, John P; Shikhaliev, Polad M; Matthews, Kenneth L; Clarke, Taylor; Henderson, Alexander; Liang, Edison P

2015-09-01

The purpose of this work was to adapt a lightweight, permanent magnet electron energy spectrometer for the measurement of energy spectra of therapeutic electron beams. An irradiation geometry and measurement technique were developed for an approximately 0.54-T, permanent dipole magnet spectrometer to produce suitable latent images on computed radiography (CR) phosphor strips. Dual-pinhole electron collimators created a 0.318-cm diameter, approximately parallel beam incident on the spectrometer and an appropriate dose rate at the image plane (CR strip location). X-ray background in the latent image, reduced by a 7.62-cm thick lead block between the pinhole collimators, was removed using a fitting technique. Theoretical energy-dependent detector response functions (DRFs) were used in an iterative technique to transform CR strip net mean dose profiles into energy spectra on central axis at the entrance to the spectrometer. These spectra were transformed to spectra at 95-cm source to collimator distance (SCD) by correcting for the energy dependence of electron scatter. The spectrometer was calibrated by comparing peak mean positions in the net mean dose profiles, initially to peak mean energies determined from the practical range of central-axis percent depth-dose (%DD) curves, and then to peak mean energies that accounted for how the collimation modified the energy spectra (recalibration). The utility of the spectrometer was demonstrated by measuring the energy spectra for the seven electron beams (7-20 MeV) of an Elekta Infinity radiotherapy accelerator. Plots of DRF illustrated their dependence on energy and position in the imaging plane. Approximately 15 iterations solved for the energy spectra at the spectrometer entrance from the measured net mean dose profiles. Transforming those spectra into ones at 95-cm SCD increased the low energy tail of the spectra, while correspondingly decreasing the peaks and shifting them to slightly lower energies. Energy calibration

Unravelling regolith material types using Mg/Al and K/Al plot to support field regolith identification in the savannah regions of NW Ghana, West Africa

Science.gov (United States)

Arhin, Emmanuel; Zango, Saeed M.

2015-12-01

The XRF analytical method was used to measure the weight % of the major oxides in regolith samples. The metal weight % of Mg, K and Al were calculated from their oxides and were normalised relative to immobile Al calculated from its oxide. The plot of Mg/Al and K/Al identified the regolith of the study area to consist of 137 transported clays, 4 ferruginous sediments or ferricrete, 2 lateritic duricrust and 4 saprolites. Surface regolith that had undergone secondary transformation and shows compositional overlaps were 4 transported clays with Fe-oxide impregnation may be referred to as nodular laterite and 5 ferruginous saprolites. The variable regolith materials features identified from the 154 samples enabled the characterisation and identification of the different sample materials because an overprint of bedrock geochemistry is reflected in the regolith. Plot of Mg/Al and K/Al highlighted the compositional variability of the regolith samples and refute the notion of the homogeneity of all the sampled materials in the area. The study thus recognized Mg/Al versus K/Al plots to be used in supporting field identification of regolith mapping units particularly in complex regolith terrains of savannah regions of Ghana and in similar areas where geochemical exploration surveys are being carried out under cover.

Scaling wood volume estimates from inventory plots to landscapes with airborne LiDAR in temperate deciduous forest

Directory of Open Access Journals (Sweden)

Shaun R. Levick

2016-05-01

Full Text Available Abstract Background Monitoring and managing carbon stocks in forested ecosystems requires accurate and repeatable quantification of the spatial distribution of wood volume at landscape to regional scales. Grid-based forest inventory networks have provided valuable records of forest structure and dynamics at individual plot scales, but in isolation they may not represent the carbon dynamics of heterogeneous landscapes encompassing diverse land-management strategies and site conditions. Airborne LiDAR has greatly enhanced forest structural characterisation and, in conjunction with field-based inventories, it provides avenues for monitoring carbon over broader spatial scales. Here we aim to enhance the integration of airborne LiDAR surveying with field-based inventories by exploring the effect of inventory plot size and number on the relationship between field-estimated and LiDAR-predicted wood volume in deciduous broad-leafed forest in central Germany. Results Estimation of wood volume from airborne LiDAR was most robust (R2 = 0.92, RMSE = 50.57 m3 ha−1 ~14.13 Mg C ha−1 when trained and tested with 1 ha experimental plot data (n = 50. Predictions based on a more extensive (n = 1100 plot network with considerably smaller (0.05 ha plots were inferior (R2 = 0.68, RMSE = 101.01 ~28.09 Mg C ha−1. Differences between the 1 and 0.05 ha volume models from LiDAR were negligible however at the scale of individual land-management units. Sample size permutation tests showed that increasing the number of inventory plots above 350 for the 0.05 ha plots returned no improvement in R2 and RMSE variability of the LiDAR-predicted wood volume model. Conclusions Our results from this study confirm the utility of LiDAR for estimating wood volume in deciduous broad-leafed forest, but highlight the challenges associated with field plot size and number in establishing robust relationships between airborne LiDAR and field derived wood volume. We

Scaling wood volume estimates from inventory plots to landscapes with airborne LiDAR in temperate deciduous forest.

Science.gov (United States)

Levick, Shaun R; Hessenmöller, Dominik; Schulze, E-Detlef

2016-12-01

Monitoring and managing carbon stocks in forested ecosystems requires accurate and repeatable quantification of the spatial distribution of wood volume at landscape to regional scales. Grid-based forest inventory networks have provided valuable records of forest structure and dynamics at individual plot scales, but in isolation they may not represent the carbon dynamics of heterogeneous landscapes encompassing diverse land-management strategies and site conditions. Airborne LiDAR has greatly enhanced forest structural characterisation and, in conjunction with field-based inventories, it provides avenues for monitoring carbon over broader spatial scales. Here we aim to enhance the integration of airborne LiDAR surveying with field-based inventories by exploring the effect of inventory plot size and number on the relationship between field-estimated and LiDAR-predicted wood volume in deciduous broad-leafed forest in central Germany. Estimation of wood volume from airborne LiDAR was most robust (R 2  = 0.92, RMSE = 50.57 m 3 ha -1  ~14.13 Mg C ha -1 ) when trained and tested with 1 ha experimental plot data (n = 50). Predictions based on a more extensive (n = 1100) plot network with considerably smaller (0.05 ha) plots were inferior (R 2  = 0.68, RMSE = 101.01 ~28.09 Mg C ha -1 ). Differences between the 1 and 0.05 ha volume models from LiDAR were negligible however at the scale of individual land-management units. Sample size permutation tests showed that increasing the number of inventory plots above 350 for the 0.05 ha plots returned no improvement in R 2 and RMSE variability of the LiDAR-predicted wood volume model. Our results from this study confirm the utility of LiDAR for estimating wood volume in deciduous broad-leafed forest, but highlight the challenges associated with field plot size and number in establishing robust relationships between airborne LiDAR and field derived wood volume. We are moving into a forest management era where

Experimental Garden Plots for Botany Lessons

Science.gov (United States)

Gorodnicheva, V. V.; Vasil'eva, E. I.

1976-01-01

Discussion of the botany lessons used at two schools points out the need for fifth and sixth grade students to be taught the principles of plant life through observations made at an experimental garden plot at the school. (ND)

Lawful Permanent Residents Fiscal Year 2011 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanet residents (LPRs) are foreign nationals who have been gratned the right to reside permanently in the United States. LPRs are also known as 'permanent...

Contemplation on Plot and Personification in Tehran Makhuf

OpenAIRE

Mohammad Pashaei; Mirjalil Akrami; Mirjalil Akrami

2013-01-01

 Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of âTehran-e- Makhufâ and respond to the questions on the method employed for plot and personification and analyze it from pl...

Complexity Plots

KAUST Repository

Thiyagalingam, Jeyarajan

2013-06-01

In this paper, we present a novel visualization technique for assisting the observation and analysis of algorithmic complexity. In comparison with conventional line graphs, this new technique is not sensitive to the units of measurement, allowing multivariate data series of different physical qualities (e.g., time, space and energy) to be juxtaposed together conveniently and consistently. It supports multivariate visualization as well as uncertainty visualization. It enables users to focus on algorithm categorization by complexity classes, while reducing visual impact caused by constants and algorithmic components that are insignificant to complexity analysis. It provides an effective means for observing the algorithmic complexity of programs with a mixture of algorithms and black-box software through visualization. Through two case studies, we demonstrate the effectiveness of complexity plots in complexity analysis in research, education and application. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and Blackwell Publishing Ltd.

Permanent right-to-left shunt is the key factor in managing patent foramen ovale.

Science.gov (United States)

Rigatelli, Gianluca; Dell'Avvocata, Fabio; Cardaioli, Paolo; Giordan, Massimo; Braggion, Gabriele; Aggio, Silvio; Chinaglia, Mauro; Mandapaka, Sangeeta; Kuruvilla, John; Chen, Jack P; Nanjundappa, Aravinda

2011-11-15

We sought to prospectively evaluate risk of stroke and impact of transcatheter patent foramen ovale (PFO) closure in patients with permanent right-to left shunt compared with those with Valsalva maneuver-induced right-to-left shunt. Pathophysiology and properly management of PFO still remain far from being fully clarified: in particular, the contribution of permanent right-to-left shunt remains unknown. Between March 2006 and October 2010, we enrolled 180 (mean age 44 ± 10.9 years, 98 women) of 320 consecutive patients referred to our center for transcatheter PFO closure, who had spontaneous permanent right-to-left shunt on transcranial Doppler and transthoracic/transesophageal echocardiography. All patients fulfilled the standard current indications for transcatheter closure and underwent preoperative transesophageal echocardiography and brain magnetic resonance imaging, with subsequent intracardiac echocardiographic-guided transcatheter PFO closure. We compared the clinical echocardiographic characteristics of these patients (Permanent Group) with the rest of 140 patients with right-to-left shunt only during Valsalva maneuver (Valsalva Group). Compared with the Valsalva Group patients, patients of the Permanent Group had increased frequency of multiple ischemic brain lesions on magnetic resonance imaging, previous recurrent stroke, previous peripheral arteries embolism, migraine with aura, and-more frequently-atrial septal aneurysm and prominent Eustachian valve. The presence of permanent shunt confers the highest risk of recurrent stroke (odds ratio: 5.9, 95% confidence interval: 2.0 to 12, p < 0.001). No differences were recorded between the 2 groups with regard to recurrence of ischemic events after the closure procedure. Despite its small-sample nature, our study suggests that patients with permanent right-to-left shunt have potentially a higher risk of paradoxical embolism compared with those without. Copyright © 2011 American College of Cardiology

Exploring the Relationship Between Resilience and Ostomy Adjustment in Adults With a Permanent Ostomy.

Science.gov (United States)

Scardillo, Jody; Dunn, Karen S; Piscotty, Ronald

2016-01-01

The aims of this study were to describe the relationship between resilience and ostomy adjustment in adults with permanent stomas and to determine if participants who report higher levels of resilience also report higher levels of adjustment to a permanent ostomy. Descriptive, correlational research design utilizing the Roy Adaptation Model as the theoretical framework was used. Persons with permanent stomas were recruited from ostomy support groups on the East Coast of the United States. The study sample included 48 respondents. Their mean age was 66 ± 12.7 years (mean ± SD); the majority (60.4%) were women, had an ileostomy (62.5%), and had a history of inflammatory bowel disease (62.5%). Respondents completed a questionnaire that queried demographic and pertinent clinical data, along with 2 previously validated instruments, the Resilience Scale and Ostomy Adjustment Inventory-23. The relationships between levels of resilience, levels of adjustment to an ostomy, and demographic characteristics were examined. Participants with higher levels of ostomy adjustment had higher levels of resilience than respondents who reported lower levels of ostomy adjustment (r = 0.65, P ≤ .01). Findings from this study suggest that higher levels of resilience facilitate adjustment to a permanent ostomy.

Fitting Data to Model: Structural Equation Modeling Diagnosis Using Two Scatter Plots

Science.gov (United States)

Yuan, Ke-Hai; Hayashi, Kentaro

2010-01-01

This article introduces two simple scatter plots for model diagnosis in structural equation modeling. One plot contrasts a residual-based M-distance of the structural model with the M-distance for the factor score. It contains information on outliers, good leverage observations, bad leverage observations, and normal cases. The other plot contrasts…

Permanent magnet design for high-speed superconducting bearings

Science.gov (United States)

Hull, John R.; Uherka, Kenneth L.; Abdoud, Robert G.

1996-01-01

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing.

Zipper plot: visualizing transcriptional activity of genomic regions.

Science.gov (United States)

Avila Cobos, Francisco; Anckaert, Jasper; Volders, Pieter-Jan; Everaert, Celine; Rombaut, Dries; Vandesompele, Jo; De Preter, Katleen; Mestdagh, Pieter

2017-05-02

Reconstructing transcript models from RNA-sequencing (RNA-seq) data and establishing these as independent transcriptional units can be a challenging task. Current state-of-the-art tools for long non-coding RNA (lncRNA) annotation are mainly based on evolutionary constraints, which may result in false negatives due to the overall limited conservation of lncRNAs. To tackle this problem we have developed the Zipper plot, a novel visualization and analysis method that enables users to simultaneously interrogate thousands of human putative transcription start sites (TSSs) in relation to various features that are indicative for transcriptional activity. These include publicly available CAGE-sequencing, ChIP-sequencing and DNase-sequencing datasets. Our method only requires three tab-separated fields (chromosome, genomic coordinate of the TSS and strand) as input and generates a report that includes a detailed summary table, a Zipper plot and several statistics derived from this plot. Using the Zipper plot, we found evidence of transcription for a set of well-characterized lncRNAs and observed that fewer mono-exonic lncRNAs have CAGE peaks overlapping with their TSSs compared to multi-exonic lncRNAs. Using publicly available RNA-seq data, we found more than one hundred cases where junction reads connected protein-coding gene exons with a downstream mono-exonic lncRNA, revealing the need for a careful evaluation of lncRNA 5'-boundaries. Our method is implemented using the statistical programming language R and is freely available as a webtool.

SpectraPLOT, Visualization Package with a User-Friendly Graphical Interface

Science.gov (United States)

Sebald, James; Macfarlane, Joseph; Golovkin, Igor

2017-10-01

SPECT3D is a collisional-radiative spectral analysis package designed to compute detailed emission, absorption, or x-ray scattering spectra, filtered images, XRD signals, and other synthetic diagnostics. The spectra and images are computed for virtual detectors by post-processing the results of hydrodynamics simulations in 1D, 2D, and 3D geometries. SPECT3D can account for a variety of instrumental response effects so that direct comparisons between simulations and experimental measurements can be made. SpectraPLOT is a user-friendly graphical interface for viewing a wide variety of results from SPECT3D simulations, and applying various instrumental effects to the simulated images and spectra. We will present SpectraPLOT's ability to display a variety of data, including spectra, images, light curves, streaked spectra, space-resolved spectra, and drilldown plasma property plots, for an argon-doped capsule implosion experiment example. Future SpectraPLOT features and enhancements will also be discussed.

The interaction between the permanent magnet and ceramic superconductor with organic filler

International Nuclear Information System (INIS)

Woźny, L; Kisiel, A; Garbera, A

2016-01-01

The aim of the study was to examine the phenomenon of magnetic levitation for YBaCuO superconducting samples in pure form and with epoxy resin content of 40%. Samples of superconductors were prepared by the standard reaction in the solid state. The forces of interaction between the superconductor and neodymium permanent magnet were measured. Samples with epoxy resin fillers had significantly smaller levitation force than the sample of the sintered superconductors. This is due to a much lower content of pure superconducting material in the sample volume (about 60% of the YBaCuO). However, the obvious advantage of such samples is the possibility of preparation superconductors with complicated shapes, eg. for use in a superconducting bearings or other devices. (paper)

Effectiveness of commercial microbial products in enhancing oil degradation in Prince William Sound field plots

International Nuclear Information System (INIS)

Venosa, A.D.; Haines, J.R.; Allen, D.M.

1991-01-01

In the spring of 1990, previously reported laboratory experiments were conducted on 10 commercial microbial products to test for enhanced biodegradation of weathered crude oil from the Exxon Valdez oil spill. The laboratory tests measured the rate and extent of oil degradation in closed flasks. Weathered oil from the beaches in Alaska and seawater from Prince William Sound were used in the tests. Two of the 10 products were found to provide significantly greater alkane degradation than flasks supplemented with mineral nutrients alone. These two products were selected for further testing on a beach in Prince William Sound. A randomized complete block experiment was designed to compare the effectiveness of these two products in enhancing oil degradation compared to simple fertilizer alone. Four small plots consisting of a no nutrient control, a mineral nutrient plot, and two plots receiving mineral nutrients plus the two products, were laid out on a contaminated beach. These four plots comprised a 'block' of treatments, and this block was replicated four times on the same beach. Triplicate samples of beach sediment were collected at four equally spaced time intervals and analyzed for oil residue weight and alkane hydrocarbon profile changes with time. The objective was to determine if either of the two commercial microbiological products was able to enhance bioremediation of an oil-contaminated beach in Prince William Sound to an extent greater than that achievable by simple fertilizer application. Results indicated no significant differences among the four treatments in the 27-day period of the experiment

Permanent magnet design for high-speed superconducting bearings

International Nuclear Information System (INIS)

Hull, J.R.; Uherka, K.L.; Abdoud, R.G.

1996-01-01

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure is disclosed. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing. 9 figs

On the Nature of Earth-Mars Porkchop Plots

Science.gov (United States)

Woolley, Ryan C.; Whetsel, Charles W.

2013-01-01

Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

Investigation on demagnetization of Nd2Fe14B permanent magnets induced by irradiation

Science.gov (United States)

Li, Zhefu; Jia, Yanyan; Liu, Renduo; Xu, Yuhai; Wang, Guanghong; Xia, Xiaobin

2017-12-01

Nd2Fe14B is an important component of insertion devices, which are used in synchrotron radiation sources, and could be demagnetized by irradiation. In the present study, the Monte Carlo code FLUKA was used to analyze the irradiation field of Nd2Fe14B, and it was confirmed that the main demagnetization particle was neutron. Nd2Fe14B permanent magnet samples were irradiated by Ar ions at different doses to simulate neutron irradiation damage. The hysteresis loops were measured using a vibrating sample magnetometer, and the microstructure evolutions were characterized by transmission electron microscopy. Moreover, the relationship between them was discussed. The results indicate that the decrease in saturated magnetization is caused by the changes in microstructure. The evolution of single crystals into an amorphous structure is the reason for the demagnetization phenomenon of Nd2Fe14B permanent magnets when considering its microscopic structure.

Detection and monitoring of invasive exotic plants: a comparison of four sampling methods

Science.gov (United States)

Cynthia D. Huebner

2007-01-01

The ability to detect and monitor exotic invasive plants is likely to vary depending on the sampling method employed. Methods with strong qualitative thoroughness for species detection often lack the intensity necessary to monitor vegetation change. Four sampling methods (systematic plot, stratified-random plot, modified Whittaker, and timed meander) in hemlock and red...

Use of experimental plots for assessing Chernobyl-derived fallout of {sup 137}CS in France

Energy Technology Data Exchange (ETDEWEB)

Bonte, Ph.; Sogon, S.; Bourgeois, S.; Terce, M.; Morel, Ch. [Laboratoire des Sciences du Climat et de l' Environnement, avenue de la Terrasse, 91 - Gif-sur-Yvette (France)

2004-07-01

Caesium-137 ({sup 137}Cs) is widely used for the determination of soil erosion and sedimentation rates. However, in Europe, if the additional inputs of {sup 137}Cs fallout associated with the Chernobyl accident have given a supplementary mark to know the chronological history of buried sediments in rivers or wetlands, they have considerably complicated the interpretation of {sup 137}Cs inventories used for estimating soil redistribution on slopes. In fact, determination of Chernobyl-derived fallout {sup 137}Cs is problematic because very few sites have been correctly sampled at the moment of the accident. During the ten years after, it was possible to estimate the fallout measuring the {sup 134}Cs activity for estimating {sup 137}Cs ({sup 137}Cs /{sup 134}Cs 2.0 at the time of the accident). But these measurements are extremely rare, whereas it should be the more accurate method to resolve this question. The more used solution is to use model based on atmospheric circulation and rain precipitation, the main part of fallout been due to atmospheric washing by the rain. Other solution is to compare {sup 137}Cs specific activity of soil samples collected after the accident and older samples. Then, we choose a set of soil samples collected on several experimental plots at different places in France, and sampled before and after the Chernobyl accident, to determine the part of contamination linked to this {sup 137}Cs fallout event with a simple comparison of their {sup 137}Cs specific activity. In fact, national French institutes working on agronomy maintain experimental plots, with varied surface area (1 m{sup 2} 10 m{sup 2} or larger), for monitoring of soil physics and chemistry evolution. Nine sites were studied: two of them close to Paris, one 100 km east of Paris, 3 in Loire basin and 3 in south west, in the Pyrenees Atlantic. These measurements confirm the influence of the Chernobyl radioactive plume over the Paris Basin concerning the {sup 137}Cs fallout. The

Safety effects of permanent running lights for bicycles

DEFF Research Database (Denmark)

Madsen, Jens Chr. Overgaard; Andersen, T.; Lahrmann, Harry

2013-01-01

, including all recorded bicycle accidents with personal injury to the participating cyclist, is 19% lower for cyclists with permanent running lights mounted; indicating that the permanent bicycle running light significantly improves traffic safety for cyclists. The study shows that use of permanent bicycle......Making the use of daytime running lights mandatory for motor vehicles is generally documented to have had a positive impact upon traffic safety. Improving traffic safety for bicyclists is a focal point in the road traffic safety work in Denmark. In 2004 and 2005 a controlled experiment including...... 3845 cyclists was carried out in Odense, Denmark in order to examine, if permanent running lights mounted to bicycles would improve traffic safety for cyclists. The permanent running lights were mounted to 1845 bicycles and the accident rate was recorded through 12 months for this treatment group...

Activities: Plotting and Predicting from Pairs.

Science.gov (United States)

Shulte, Albert P.; Swift, Jim

1984-01-01

This teacher's guide provides objectives, procedures, and list of materials needed for activities which center around the use of a scatter plot to examine relationships shown by bivariate data. The activities are suitable for grades 7 to 12. Four student worksheets are included. (JN)

Workplace bullying a risk for permanent employees.

Science.gov (United States)

Keuskamp, Dominic; Ziersch, Anna M; Baum, Fran E; Lamontagne, Anthony D

2012-04-01

We tested the hypothesis that the risk of experiencing workplace bullying was greater for those employed on casual contracts compared to permanent or ongoing employees. A cross-sectional population-based telephone survey was conducted in South Australia in 2009. Employment arrangements were classified by self-report into four categories: permanent, casual, fixed-term and self-employed. Self-report of workplace bullying was modelled using multiple logistic regression in relation to employment arrangement, controlling for sex, age, working hours, years in job, occupational skill level, marital status and a proxy for socioeconomic status. Workplace bullying was reported by 174 respondents (15.2%). Risk of workplace bullying was higher for being in a professional occupation, having a university education and being separated, divorced or widowed, but did not vary significantly by sex, age or job tenure. In adjusted multivariate logistic regression models, casual workers were significantly less likely than workers on permanent or fixed-term contracts to report bullying. Those separated, divorced or widowed had higher odds of reporting bullying than married, de facto or never-married workers. Contrary to expectation, workplace bullying was more often reported by permanent than casual employees. It may represent an exposure pathway not previously linked with the more idealised permanent employment arrangement. A finer understanding of psycho-social hazards across all employment arrangements is needed, with equal attention to the hazards associated with permanent as well as casual employment. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

Long-term mortality risk in individuals with permanent work-related impairment.

Science.gov (United States)

Scott-Marshall, Heather K; Tompa, Emile; Wang, Ying; Liao, Qing

2014-07-11

Recent estimates indicate that at least one in five activity-limiting injuries occurs at work. Of individuals who suffer these injuries approximately 10% experience some degree of functional impairment. We were interested in investigating long-term mortality risk in individuals with permanent impairment from work injury and to examine whether work disability is a significant explanatory factor. We used a retrospective matched cohort methodology to examine differences in mortality rates between individuals with permanent impairment from a work injury and a group of non-injured controls over a 19-year period. We used a sample of impaired workers to investigate the impact of work disability on mortality risk using percentage of earnings recovery after injury as the key proxy measure. All analyses were stratified by sex. Permanent impairment from a work injury was predictive of premature mortality in both male and female claimants, though the risk was slightly higher among women. Work disability was a key explanatory factor in the rate of death among impaired workers, the effects being more pronounced in men. We also found that higher impairment level was associated with mortality in men but not in women. The study demonstrates the impact of permanent work-related impairment on longevity and identifies work disability as an important determinant of mortality risk. Given the disconnect between impairment ratings derived from standard diagnostic tools and labour-market activity after accident, more research is needed on the specific factors that contribute to work disability, particularly those related to psycho-social health and well-being.

Nonuniform radiation damage in permanent magnet quadrupoles.

Science.gov (United States)

Danly, C R; Merrill, F E; Barlow, D; Mariam, F G

2014-08-01

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL's pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

Nonuniform radiation damage in permanent magnet quadrupoles

International Nuclear Information System (INIS)

Danly, C. R.; Merrill, F. E.; Barlow, D.; Mariam, F. G.

2014-01-01

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL’s pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components

Nonuniform radiation damage in permanent magnet quadrupoles

Energy Technology Data Exchange (ETDEWEB)

Danly, C. R.; Merrill, F. E.; Barlow, D.; Mariam, F. G. [Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States)

2014-08-15

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL’s pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

A Guided Inquiry on Hubble Plots and the Big Bang

Science.gov (United States)

Forringer, Ted

2014-01-01

In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

Globally Optimal Segmentation of Permanent-Magnet Systems

DEFF Research Database (Denmark)

Insinga, Andrea Roberto; Bjørk, Rasmus; Smith, Anders

2016-01-01

Permanent-magnet systems are widely used for generation of magnetic fields with specific properties. The reciprocity theorem, an energy-equivalence principle in magnetostatics, can be employed to calculate the optimal remanent flux density of the permanent-magnet system, given any objective...... remains unsolved. We show that the problem of optimal segmentation of a two-dimensional permanent-magnet assembly with respect to a linear objective functional can be reduced to the problem of piecewise linear approximation of a plane curve by perimeter maximization. Once the problem has been cast...

A Bayesian CUSUM plot: Diagnosing quality of treatment.

Science.gov (United States)

Rosthøj, Steen; Jacobsen, Rikke-Line

2017-12-01

To present a CUSUM plot based on Bayesian diagnostic reasoning displaying evidence in favour of "healthy" rather than "sick" quality of treatment (QOT), and to demonstrate a technique using Kaplan-Meier survival curves permitting application to case series with ongoing follow-up. For a case series with known final outcomes: Consider each case a diagnostic test of good versus poor QOT (expected vs. increased failure rates), determine the likelihood ratio (LR) of the observed outcome, convert LR to weight taking log to base 2, and add up weights sequentially in a plot showing how many times odds in favour of good QOT have been doubled. For a series with observed survival times and an expected survival curve: Divide the curve into time intervals, determine "healthy" and specify "sick" risks of failure in each interval, construct a "sick" survival curve, determine the LR of survival or failure at the given observation times, convert to weights, and add up. The Bayesian plot was applied retrospectively to 39 children with acute lymphoblastic leukaemia with completed follow-up, using Nordic collaborative results as reference, showing equal odds between good and poor QOT. In the ongoing treatment trial, with 22 of 37 children still at risk for event, QOT has been monitored with average survival curves as reference, odds so far favoring good QOT 2:1. QOT in small patient series can be assessed with a Bayesian CUSUM plot, retrospectively when all treatment outcomes are known, but also in ongoing series with unfinished follow-up. © 2017 John Wiley & Sons, Ltd.

Comparative gene expression analysis of the human periodontal ligament in deciduous and permanent teeth.

Directory of Open Access Journals (Sweden)

Je Seon Song

Full Text Available There are histological and functional differences between human deciduous and permanent periodontal ligament (PDL tissues. The aim of this study was to determine the differences between these two types of tissue at the molecular level by comparing their gene expression patterns. PDL samples were obtained from permanent premolars (n = 38 and anterior deciduous teeth (n = 31 extracted from 40 healthy persons. Comparative cDNA microarray analysis revealed several differences in gene expression between the deciduous and permanent PDL tissues. These findings were verified by qRT-PCR (quantitative reverse-transcription-polymerase chain reaction analysis, and the areas where genes are expressed were revealed by immunohistochemical staining. The expressions of 21 genes were up-regulated in deciduous relative to PDL tissues, and those of 30 genes were up-regulated in permanent relative to deciduous PDL tissues. The genes that were up-regulated in deciduous PDL tissues were those involved in the formation of the extracellular matrix (LAMC2, LAMB3, and COMP, tissue development (IGF2BP, MAB21L2, and PAX3, and inflammatory or immune reactions leading to tissue degradation (IL1A, CCL21, and CCL18. The up-regulated genes in permanent PDL tissues were related to tissue degradation (IL6 and ADAMTS18, myocontraction (PDE3B, CASQ2, and MYH10, and neurological responses (FOS, NCAM2, SYT1, SLC22A3, DOCK3, LRRTM1, LRRTM3, PRSS12, and ARPP21. The analysis of differential gene expressions between deciduous and permanent PDL tissues aids our understanding of histological and functional differences between them at the molecular level.

Comparative gene expression analysis of the human periodontal ligament in deciduous and permanent teeth.

Science.gov (United States)

Song, Je Seon; Hwang, Dong Hwan; Kim, Seong-Oh; Jeon, Mijeong; Choi, Byung-Jai; Jung, Han-Sung; Moon, Seok Jun; Park, Wonse; Choi, Hyung-Jun

2013-01-01

There are histological and functional differences between human deciduous and permanent periodontal ligament (PDL) tissues. The aim of this study was to determine the differences between these two types of tissue at the molecular level by comparing their gene expression patterns. PDL samples were obtained from permanent premolars (n = 38) and anterior deciduous teeth (n = 31) extracted from 40 healthy persons. Comparative cDNA microarray analysis revealed several differences in gene expression between the deciduous and permanent PDL tissues. These findings were verified by qRT-PCR (quantitative reverse-transcription-polymerase chain reaction) analysis, and the areas where genes are expressed were revealed by immunohistochemical staining. The expressions of 21 genes were up-regulated in deciduous relative to PDL tissues, and those of 30 genes were up-regulated in permanent relative to deciduous PDL tissues. The genes that were up-regulated in deciduous PDL tissues were those involved in the formation of the extracellular matrix (LAMC2, LAMB3, and COMP), tissue development (IGF2BP, MAB21L2, and PAX3), and inflammatory or immune reactions leading to tissue degradation (IL1A, CCL21, and CCL18). The up-regulated genes in permanent PDL tissues were related to tissue degradation (IL6 and ADAMTS18), myocontraction (PDE3B, CASQ2, and MYH10), and neurological responses (FOS, NCAM2, SYT1, SLC22A3, DOCK3, LRRTM1, LRRTM3, PRSS12, and ARPP21). The analysis of differential gene expressions between deciduous and permanent PDL tissues aids our understanding of histological and functional differences between them at the molecular level.

Plot - level stem volume estimation and tree species discrimination with CASI remote sensing

Energy Technology Data Exchange (ETDEWEB)

Holmgren, Johan; Wallerman, J.; Olsson, Haakan

1999-10-01

Spectral data from the Compact Airborne Spectrographic Imager (CASI), with four bands (460-495 nm, 550-580 nm, 660-682 nm, 740-762 nm) acquired from a forest test area (Lat. 60 deg 00` N, Long. 17 deg 18` E), the Kaettboele estate near Uppsala, was analysed together with forest data from a number of field plots. Data from two flight lines, one towards and the other perpendicular to the sun was used. Information about stem volume and species composition from plots with 10-m radius, 138 in the first and 120 in the second flight line, was available. There was a positive correlation (R{sup 2} 0.51-0.53) between stem volume and the inverted radiance for all four bands on plot level. The strong correlation between stem volume and a shadow density measure indicates that shadows explain much of the correlation. For the flight line perpendicular to the sun, the correlation was stronger for the side towards the sun compared to the side away from the sun. In the first flight line, plots with a stem volume > 120 m{sup 3}ha{sup -1} were classified according to the tree species composition (pine, spruce, deciduous trees). Groups were formed based on the classification, and the hypothesis that there was no difference in spectral radiance between these groups was tested. It was possible to separate pine dominated plots from spruce dominated plots. It was also possible to separate spruce dominated plots from spruce dominated plots with a minor portion of pine, but not pine dominated plots from pine dominated plots with a minor portion of spruce. The near-infrared band was the best band for discrimination of tree species 16 refs, 2 figs, 8 tabs

Nuclear Zpif-type plots

International Nuclear Information System (INIS)

Ma Yugang

2000-01-01

Isospin dependent classical molecular dynamics model is used to investigate the nuclear disassembly of 129 Xe. Zpif-type plot in the field of linguistics is tested for the rank-classified cluster arrangement from this nuclear disassembly. It is found that the average cluster charge (or mass) of rank n in the charge (or mass) list is exactly inverse to its rank, i.e. there exists Zpif's law at the point of the liquid gas phase transition. This novel criterion can be used to diagnose the nuclear liquid gas phase transition experimentally and theoretically

Master plot analysis of microcracking in graphite/epoxy and graphite/PEEK laminates

Science.gov (United States)

Nairn, John A.; Hu, Shoufeng; Bark, Jong Song

1993-01-01

We used a variational stress analysis and an energy release rate failure criterion to construct a master plot analysis of matrix microcracking. In the master plot, the results for all laminates of a single material are predicted to fall on a single line whose slope gives the microcracking toughness of the material. Experimental results from 18 different layups of AS4/3501-6 laminates show that the master plot analysis can explain all observations. In particular, it can explain the differences between microcracking of central 90 deg plies and of free-surface 90 deg plies. Experimental results from two different AS4/PEEK laminates tested at different temperatures can be explained by a modified master plot that accounts for changes in the residual thermal stresses. Finally, we constructed similar master plot analyses for previous literature microcracking models. All microcracking theories that ignore the thickness dependence of the stresses gave poor results.

Generation of magnetic fields for accelerators with permanent magnets

International Nuclear Information System (INIS)

Meinander, T.

1994-01-01

Commercially available permanent magnet materials and their properties are reviewed. Advantages and disadvantages of using permanent magnets as compared to electromagnets for the generation of specific magnetic fields are discussed. Basic permanent magnet configurations in multipole magnets and insertion devices are presented. (orig.)

Reciprocity of temporary and permanent workers: an exploratory study in an industrial company.

Science.gov (United States)

Lopes, Silvia; Chambel, Maria José

2012-11-01

The increasing use of temporary work prompts the need to understand to what degree workers with this type of contract differ from permanent workers as to the relationship they establish with the organization they work for. This study used a sample of temporary workers (N = 78) and permanent workers (N = 196) within the same company of electronics in Portugal. The results show that, regardless of the type of contract, the perception of human resource practices was related to the perception of psychological contract fulfillment by the company. Additionally and according to the norm of reciprocity, we verified that when workers thought the company was fulfilling its obligations they responded favorably showing more affective commitment towards the company. However, we found differences between these two groups of workers: for the permanent performance appraisal, training and rewards were human resources practices that were significantly related to psychological contract fulfillment, while for the temporary ones there weren't any specific practices that had a significant relationship with that variable. The practical implications of these findings for the management of temporary workers are discussed.

Rotatable Small Permanent Magnet Array for Ultra-Low Field Nuclear Magnetic Resonance Instrumentation: A Concept Study.

Science.gov (United States)

Vogel, Michael W; Giorni, Andrea; Vegh, Viktor; Pellicer-Guridi, Ruben; Reutens, David C

2016-01-01

We studied the feasibility of generating the variable magnetic fields required for ultra-low field nuclear magnetic resonance relaxometry with dynamically adjustable permanent magnets. Our motivation was to substitute traditional electromagnets by distributed permanent magnets, increasing system portability. The finite element method (COMSOL®) was employed for the numerical study of a small permanent magnet array to calculate achievable magnetic field strength, homogeneity, switching time and magnetic forces. A manually operated prototype was simulated and constructed to validate the numerical approach and to verify the generated magnetic field. A concentric small permanent magnet array can be used to generate strong sample pre-polarisation and variable measurement fields for ultra-low field relaxometry via simple prescribed magnet rotations. Using the array, it is possible to achieve a pre-polarisation field strength above 100 mT and variable measurement fields ranging from 20-50 μT with 200 ppm absolute field homogeneity within a field-of-view of 5 x 5 x 5 cubic centimetres. A dynamic small permanent magnet array can generate multiple highly homogeneous magnetic fields required in ultra-low field nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) instruments. This design can significantly reduce the volume and energy requirements of traditional systems based on electromagnets, improving portability considerably.

Constraints on the unitarity triangle angle gamma from Dalitz plot analysis of B-0 -> DK+pi(-) decays

NARCIS (Netherlands)

Aaij, R.; Beteta, C. Abellan; Adeva, B.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassi, G.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; d'Argent, P.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Onderwater, C. J. G.; Pellegrino, A.; Tolk, S.

2016-01-01

The first study is presented of CP violation with an amplitude analysis of the Dalitz plot of B-0 -> DK+pi(-) decays, with D -> K+pi(-), K+K-, and pi(+)pi(-). The analysis is based on a data sample corresponding to 3.0 fb(-1) of pp collisions collected with the LHCb detector. No significant CP

Enhancing Parent-Child Shared Book Reading Interactions: Promoting References to the Book's Plot and Socio-Cognitive Themes

Science.gov (United States)

Aram, Dorit; Fine, Yaara; Ziv, Margalit

2013-01-01

The study examined the efficacy of an intervention designed to promote parents' and preschoolers' references to storybooks' plot and socio-cognitive themes during shared reading within a sample of 58 families from low-SES background. All parents were given four books, one new book weekly, and were instructed to read each book four times per week…

Complex Correlation Measure: a novel descriptor for Poincaré plot

Directory of Open Access Journals (Sweden)

Gubbi Jayavardhana

2009-08-01

Full Text Available Abstract Background Poincaré plot is one of the important techniques used for visually representing the heart rate variability. It is valuable due to its ability to display nonlinear aspects of the data sequence. However, the problem lies in capturing temporal information of the plot quantitatively. The standard descriptors used in quantifying the Poincaré plot (SD1, SD2 measure the gross variability of the time series data. Determination of advanced methods for capturing temporal properties pose a significant challenge. In this paper, we propose a novel descriptor "Complex Correlation Measure (CCM" to quantify the temporal aspect of the Poincaré plot. In contrast to SD1 and SD2, the CCM incorporates point-to-point variation of the signal. Methods First, we have derived expressions for CCM. Then the sensitivity of descriptors has been shown by measuring all descriptors before and after surrogation of the signal. For each case study, lag-1 Poincaré plots were constructed for three groups of subjects (Arrhythmia, Congestive Heart Failure (CHF and those with Normal Sinus Rhythm (NSR, and the new measure CCM was computed along with SD1 and SD2. ANOVA analysis distribution was used to define the level of significance of mean and variance of SD1, SD2 and CCM for different groups of subjects. Results CCM is defined based on the autocorrelation at different lags of the time series, hence giving an in depth measurement of the correlation structure of the Poincaré plot. A surrogate analysis was performed, and the sensitivity of the proposed descriptor was found to be higher as compared to the standard descriptors. Two case studies were conducted for recognizing arrhythmia and congestive heart failure (CHF subjects from those with NSR, using the Physionet database and demonstrated the usefulness of the proposed descriptors in biomedical applications. CCM was found to be a more significant (p = 6.28E-18 parameter than SD1 and SD2 in discriminating

Dovetail spoke internal permanent magnet machine

Science.gov (United States)

Alexander, James Pellegrino [Ballston Lake, NY; EL-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Lokhandwalla, Murtuza [Clifton Park, NY; Shah, Manoj Ramprasad [Latham, NY; VanDam, Jeremy Daniel [West Coxsackie, NY

2011-08-23

An internal permanent magnet (IPM) machine is provided. The IPM machine includes a stator assembly and a stator core. The stator core also includes multiple stator teeth. The stator assembly is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface defining a cavity. The IPM machine also includes a rotor assembly and a rotor core. The rotor core is disposed inside the cavity and configured to rotate about the longitudinal axis. The rotor assembly further includes a shaft. The shaft further includes multiple protrusions alternately arranged relative to multiple bottom structures provided on the shaft. The rotor assembly also includes multiple stacks of laminations disposed on the protrusions and dovetailed circumferentially around the shaft. The rotor assembly further includes multiple pair of permanent magnets for generating a magnetic field, which magnetic field interacts with the stator magnetic field to produce a torque. The multiple pair of permanent magnets are disposed between the stacks. The rotor assembly also includes multiple middle wedges mounted between each pair of the multiple permanent magnets.

Permanent Magnet Eddy Current Loss Analysis of a Novel Motor Integrated Permanent Magnet Gear

DEFF Research Database (Denmark)

Zhang, Yuqiu; Lu, Kaiyuan; Ye, Yunyue

2012-01-01

In this paper, a new motor integrated permanent magnet gear (MIPMG) is discussed. The focus is on eddy current loss analysis associated to permanent magnets (PMs). A convenient model of MIPMG is provided based on 2-D field-motion coupled time-stepping finite element method for transient eddy...... current analysis. The model takes the eddy current effect of PMs into account in determination of the magnetic field in the air-gap and in the magnet regions. The eddy current losses generated in the magnets are properly interpreted. Design improvements for reducing the eddy current losses are suggested...

In-situ polymerization PLOT columns I: divinylbenzene

Science.gov (United States)

Shen, T. C.

1992-01-01

A novel method for preparation of porous-layer open-tubular (PLOT) columns is described. The method involves a simple and reproducible, straight-forward in-situ polymerization of monomer directly on the metal tube.

Aquifer test interpretation using derivative analysis and diagnostic plots

Science.gov (United States)

Hernández-Espriú, Antonio; Real-Rangel, Roberto; Cortés-Salazar, Iván; Castro-Herrera, Israel; Luna-Izazaga, Gabriela; Sánchez-León, Emilio

2017-04-01

Pumping tests remain a method of choice to deduce fundamental aquifer properties and to assess well condition. In the oil and gas (O&G) industry, well testing has been the core technique in examining reservoir behavior over the last 50 years. The pressure derivative by Bourdet, it is perhaps, the most significant single development in the history of well test analysis. Recently, the so-called diagnostics plots (e.g. drawdown and drawdown derivative in a log-log plot) have been successfully tested in aquifers. However, this procedure is still underutilized by groundwater professionals. This research illustrates the applicability range, advantages and drawbacks (e.g. smoothing procedures) of diagnostic plots using field examples from a wide spectrum of tests (short/long tests, constant/variable flow rates, drawdown/buildup stages, pumping well/observation well) in dissimilar geological conditions. We analyze new and pre-existent aquifer tests in Mexico, USA, Canada, Germany, France and Saudi Arabia. In constant flow rate tests, our results show that derivative analysis is an easy, robust and powerful tool to assess near-borehole damage effects, formation heterogeneity, boundaries, flow regimes, infinite-acting radial stages, i.e., valid Theisian framework, and fracture-driven flow. In step tests, the effectiveness relies on high-frequency drawdown measurements. Moreover, we adapt O&G analytical solutions to cater for the conditions in groundwater systems. In this context, further parameters can be computed analytically from the plots, such as skin factor, head losses, wellbore storage, distance to the boundary, channel-aquifer and/or fracture zone width, among others. Therefore, diagnostic plots should be considered a mandatory tool for pumping tests analysis among hydrogeologists. This project has been supported by DGAPA (UNAM) under the research project PAPIIT IN-112815.

Prescription drug use during pregnancy in France: a study from the national health insurance permanent sample.

Science.gov (United States)

Demailly, Romain; Escolano, Sylvie; Quantin, Catherine; Tubert-Bitter, Pascale; Ahmed, Ismaïl

2017-09-01

To provide an up-to-date account of drug prescription during pregnancy in France from 2011 to 2014 using the permanent sample of the French national computerized healthcare database and with a focus on recommended supplementations, fetotoxic drugs and teratogenic drugs. All pregnancies identified by the International Classification of Diseases, 10th Revision codes list in the hospitalization database, lasting more than 9 weeks of amenorrhea and whose delivery occurred between 01/01/2011 and 12/31/2014, were included. Drugs delivered between the trimester before and until the end of the pregnancy were included. Drug exposure prevalence was calculated for each year and according to pregnancy trimesters. The study included 28,491 pregnancies with a median number of 9 [5-13] (median [IQ range]) drugs delivered. The most prescribed drug class was antianemia (in 72.5% of exposed). The prescription rate of recommended vitamins (B9 and D) increased over the study period (+10%). Influenza vaccination also increased but remained at a low rate (1%). Exposure to fetotoxic drugs decreased as pregnancy advanced. Exposure to the main teratogenic antiepileptics was stable over the study period. Low-income pregnant women had a higher average drug consumption except for recommended vitamins. Pregnant French women are among the largest consumers of prescription medications worldwide. Overall, the dispensation trends observed in this study are in line with the recommendations of the French National College of Gynecologists and Obstetricians. Nevertheless, while being low, exposure to fetotoxic drugs, teratogenic drugs or those under safety alerts still occurred. Supplementations and vaccines in low-income pregnant women should also be increased. Copyright © 2017 John Wiley & Sons, Ltd.

Permanent isolation surface barrier development plan

International Nuclear Information System (INIS)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no open-quotes provenclose quotes long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems

Permanent isolation surface barrier development plan

Energy Technology Data Exchange (ETDEWEB)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no {open_quotes}proven{close_quotes} long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems.

Adjustable permanent magnet assembly for NMR and MRI

Science.gov (United States)

Pines, Alexander; Paulsen, Jeffrey; Bouchard, Louis S; Blumich, Bernhard

2013-10-29

System and methods for designing and using single-sided magnet assemblies for magnetic resonance imaging (MRI) are disclosed. The single-sided magnet assemblies can include an array of permanent magnets disposed at selected positions. At least one of the permanent magnets can be configured to rotate about an axis of rotation in the range of at least +/-10 degrees and can include a magnetization having a vector component perpendicular to the axis of rotation. The single-sided magnet assemblies can further include a magnet frame that is configured to hold the permanent magnets in place while allowing the at least one of the permanent magnets to rotate about the axis of rotation.

Method and apparatus for assembling permanent magnet rotors

Science.gov (United States)

Hsu, J.S.; Adams, D.J.

1999-06-22

A permanent magnet assembly for assembly in large permanent magnet motors and generators includes a two-piece carrier that can be slid into a slot in the rotor and then secured in place using a set screw. The invention also provides an auxiliary carrier device with guide rails that line up with the teeth of the rotor, so that a permanent magnet assembly can be pushed first into a slot, and then down the slot to its proper location. An auxiliary tool is provided to move the permanent magnet assembly into position in the slot before it is secured in place. Methods of assembling and disassembling the magnet assemblies in the rotor are also disclosed. 2 figs.

A narratological analysis of Mark 12:1-12: The plot of the Gospel of ...

African Journals Online (AJOL)

The purpose of this article is an attempt to read Mark 12: 1-12 in terms of the plot of the Gospel. Firstly a brief survey is given of the development of the term plot from Aristotle to the present, thereafter an own methodological point of departure concerning plot is formulated in order to study the plot of Mark. The conclusions ...

Corporate Policies with Permanent and Transitory Shocks

NARCIS (Netherlands)

J-P. Decamps (Jean-Paul); S. Gryglewicz (Sebastian); E. Morellec (Erwan); S. Villeneuve (Stephane)

2016-01-01

textabstractWe model the financing, cash holdings, and hedging policies of a firm facing financing frictions and subject to permanent and transitory cash flow shocks. We show that permanent and transitory shocks generate distinct, sometimes opposite, effects on corporate policies and use the model

Connecting Temporary and Permanent Organizing

DEFF Research Database (Denmark)

Stjerne, Iben Sandal; Velikova, Silviya Svejenova

2016-01-01

This paper investigates the relationship between a permanent organization and a series of temporary organizations. It draws on an in-depth study of the process through which a Danish film production company, seeking to balance innovation and persistence in a troubled industry, struggles to realize...... a novel children’s film and its sequels. The study reveals tensions at different levels as well as boundary work and boundary roles that address them, bringing in shadows of past and future projects. The study extends the understanding of the dialectic between temporary and permanent organizing...

Recurrence plot analysis of DNA sequences

Energy Technology Data Exchange (ETDEWEB)

Wu Zuobing [State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080 (China)]. E-mail: wuzb@lnm.imech.ac.cn

2004-11-15

Recurrence plot technique of DNA sequences is established on metric representation and employed to analyze correlation structure of nucleotide strings. It is found that, in the transference of nucleotide strings, a human DNA fragment has a major correlation distance, but a yeast chromosome's correlation distance has a constant increasing.

The impact of forest structure and spatial scale on the relationship between ground plot above ground biomass and GEDI lidar waveforms

Science.gov (United States)

Armston, J.; Marselis, S.; Hancock, S.; Duncanson, L.; Tang, H.; Kellner, J. R.; Calders, K.; Disney, M.; Dubayah, R.

2017-12-01

The NASA Global Ecosystem Dynamics Investigation (GEDI) will place a multi-beam waveform lidar instrument on the International Space Station (ISS) to provide measurements of forest vertical structure globally. These measurements of structure will underpin empirical modelling of above ground biomass density (AGBD) at the scale of individual GEDI lidar footprints (25m diameter). The GEDI pre-launch calibration strategy for footprint level models relies on linking AGBD estimates from ground plots with GEDI lidar waveforms simulated from coincident discrete return airborne laser scanning data. Currently available ground plot data have variable and often large uncertainty at the spatial resolution of GEDI footprints due to poor colocation, allometric model error, sample size and plot edge effects. The relative importance of these sources of uncertainty partly depends on the quality of ground measurements and region. It is usually difficult to know the magnitude of these uncertainties a priori so a common approach to mitigate their influence on model training is to aggregate ground plot and waveform lidar data to a coarser spatial scale (0.25-1ha). Here we examine the impacts of these principal sources of uncertainty using a 3D simulation approach. Sets of realistic tree models generated from terrestrial laser scanning (TLS) data or parametric modelling matched to tree inventory data were assembled from four contrasting forest plots across tropical rainforest, deciduous temperate forest, and sclerophyll eucalypt woodland sites. These tree models were used to simulate geometrically explicit 3D scenes with variable tree density, size class and spatial distribution. GEDI lidar waveforms are simulated over ground plots within these scenes using monte carlo ray tracing, allowing the impact of varying ground plot and waveform colocation error, forest structure and edge effects on the relationship between ground plot AGBD and GEDI lidar waveforms to be directly assessed. We

Plot and Personification in “Tehran-e- Makhuf“

Directory of Open Access Journals (Sweden)

M. Pashaei

Full Text Available Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European account. In some cases, he approaches to story

Contemplation on Plot and Personification in Tehran Makhuf

Directory of Open Access Journals (Sweden)

Mirjalil Akrami

2013-11-01

Full Text Available Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.  The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.  Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European account. In some cases, he

The history of permanent magnet materials

International Nuclear Information System (INIS)

Livingston, J.D.

1990-01-01

Permanent-magnet materials play a large and growing, but largely unseen, role in today's technology. Many common devices in the home and elsewhere, including appliances, computers and printers, contain permanent-magnet motors and actuators. The growth of applications for permanent magnets results in large part from the improvements in magnetic properties, which allow the engineer to design smaller, lighter and more efficient devices. The properties of the greatest technological interest are remanence, coercivity and maximum energy product. All are non-equilibrium and high structure-sensitive. Coercivity is particularly sensitive to microstructure, while remanence is sensitive to texture (crystallographic alignment). The energy product depends on both coercivity and remanence. The more than one hundredfold increase in the available energy product in this century, and the corresponding amount of magnet required for a specific application, are shown

Effect of 4% titanium tetrafluoride solution on the erosion of permanent and deciduous human enamel: an in situ/ex vivo study

Directory of Open Access Journals (Sweden)

Ana Carolina Magalhães

2009-02-01

Full Text Available This in situ/ex vivo study assessed the effect of titanium tetrafluoride (TiF4 solution on erosion of permanent (P and deciduous (d human enamel. Ten volunteers wore acrylic palatal appliances containing 4 enamel samples, divided into two rows: TiF4 and no - TiF4 (control. Each row contained one deciduous and one permanent enamel sample. During the 1st day, formation of a salivary pellicle was allowed. At the 2nd day, the 4% TiF4 solution was applied on one row (TiF4, while the other row remained untreated (control. From the 3rd until the 7th day, the samples were subjected to erosion by immersion in a cola drink for 5 min, 4 times/day. Enamel alterations were determined by microhardness testing (%SMHC. Data were analyzed using 2 two-way ANOVA and Tukey's post hoc test (α=0.05. The mean %SMHC (±SD amounted to: P (TiF4 - 73.32 ± 5.16 and control - 83.49 ± 4.59 and d (TiF4 - 83.01 ± 7.41 and control - 75.75 ± 2.57. In conclusion, the application of 4% TiF4 solution reduced the softening of permanent enamel but not of deciduous enamel significantly. However, no significant differences were detected between the permanent and deciduous enamel when the factor substrate was considered.

Using 7Be to document soil erosion on the weed plots

International Nuclear Information System (INIS)

Zhang Bo; Zhang Fengbao; Yang Mingyi

2013-01-01

Be tracing technology was applied to document soil erosion on the bare plot and weed plot, and compae soil erosion rate with the calculated rate. Results indicated that vegetation cover had obvious effect on the estimate of soil erosion rate on the weed plot using 7 Be measurement. Therefore, a factor of vegetation had been introduced into the Walling's model of converting 7 Be activity to soil erosion rate for estimating soil erosion rate on the weed slope surface. It was found that the soil erosion rates calculated by modified model were well close to the measured values on the weed plot, which illustrated that the modified model could be well used to estimate the rates of soil loss on the weed slope surface. These findings provide effective means for further study on the relationship between vegetation cover and soil erosion. (authors)

Sacrifice as a plot device

Directory of Open Access Journals (Sweden)

Ashikhmanova Natalya Alexandrovna

2015-12-01

Full Text Available It is considered the plot device “sacrifice” as a meaningful component of the narrative. It sets a minimum of substantive meaning of this formation (the idea of getting something over the loss of something. The main types of sacrifice: sacrifice and self-sacrifice. Sacrifice means bringing something to sacrifice for the sake of an idea or someone else and implies a greater degree of external attributes. Self-sacrifice brings a loss of the intrinsic value of the character. Sacrifice as the action takes place consciously and, as a rule, does not require compensation in return. Victims sacrifice not only material things but spiritual as well. Their actions are certainly driven by the idea, which is of value. In the case of self-sacrifice victim is itself a victim. Present for sacrifice plays a certain role in the development of some of the stories of fabulous narratives. Search of the present can be a starting point in the development of fantastic narrative plot. As a sacrifice the present can be considered in three forms: in the form of material expression, in the form of immaterial substance, as well as a way to transfer the character into magical power through knowledge empowerment of its formulaic spells.

6 CFR 7.29 - Documents of permanent historical value.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Documents of permanent historical value. 7.29... NATIONAL SECURITY INFORMATION Classified Information § 7.29 Documents of permanent historical value. The... contained in records determined to have permanent historical value under 44 U.S.C. 2107 before they are...

Laced permanent magnet quadrupole drift tube magnets

International Nuclear Information System (INIS)

Feinberg, B.; Behrsing, G.U.; Halbach, K.; Marks, J.S.; Morrison, M.E.; Nelson, D.H.

1988-10-01

A laced permanent magnet quadrupole drift tube magnet has been constructed for a proof-of-principle test. The magnet is a conventional tape-wound quadrupole electromagnet, using iron pole- pieces, with the addition of permanent magnet material (neodymium iron) between the poles to reduce the effects of saturation. The iron is preloaded with magnetic flux generated by the permanent magnet material, resulting in an asymmetrical saturation curve. Since the polarity of the quadrupole magnets in a drift tube linac is not reversed we can take advantage of this asymmetrical saturation to provide greater focusing strength. The magnet configuration has been optimized and the vanadium permendur poles needed in a conventional quadrupole have been replaced with iron poles. The use of permanent magnet material has allowed us to increase the focusing strength of the magnet by about 20% over that of a conventional tape-wound quadrupole. Comparisons will be made between this magnet and the conventional tape-wound quadrupole. 3 refs., 5 figs

Micromagnetics of rare-earth efficient permanent magnets

Science.gov (United States)

Fischbacher, Johann; Kovacs, Alexander; Gusenbauer, Markus; Oezelt, Harald; Exl, Lukas; Bance, Simon; Schrefl, Thomas

2018-05-01

The development of permanent magnets containing less or no rare-earth elements is linked to profound knowledge of the coercivity mechanism. Prerequisites for a promising permanent magnet material are a high spontaneous magnetization and a sufficiently high magnetic anisotropy. In addition to the intrinsic magnetic properties the microstructure of the magnet plays a significant role in establishing coercivity. The influence of the microstructure on coercivity, remanence, and energy density product can be understood by using micromagnetic simulations. With advances in computer hardware and numerical methods, hysteresis curves of magnets can be computed quickly so that the simulations can readily provide guidance for the development of permanent magnets. The potential of rare-earth reduced and rare-earth free permanent magnets is investigated using micromagnetic simulations. The results show excellent hard magnetic properties can be achieved in grain boundary engineered NdFeB, rare-earth magnets with a ThMn12 structure, Co-based nano-wires, and L10-FeNi provided that the magnet’s microstructure is optimized.

Representing Uncertainty on Model Analysis Plots

Science.gov (United States)

Smith, Trevor I.

2016-01-01

Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model.…

Variable Permanent Magnet Quadrupole

International Nuclear Information System (INIS)

Mihara, T.; Iwashita, Y.; Kyoto U.; Kumada, M.; NIRS, Chiba; Spencer, C.M.; SLAC

2007-01-01

A permanent magnet quadrupole (PMQ) is one of the candidates for the final focus lens in a linear collider. An over 120 T/m strong variable permanent magnet quadrupole is achieved by the introduction of saturated iron and a 'double ring structure'. A fabricated PMQ achieved 24 T integrated gradient with 20 mm bore diameter, 100 mm magnet diameter and 20 cm pole length. The strength of the PMQ is adjustable in 1.4 T steps, due to its 'double ring structure': the PMQ is split into two nested rings; the outer ring is sliced along the beam line into four parts and is rotated to change the strength. This paper describes the variable PMQ from fabrication to recent adjustments

U.S. Lawful Permanent Residents: Fiscal Year 2014

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs), also known as “green card” holders, are non-citizens who are lawfully authorized to live permanently within the United States.

James Brown, Sample Culture and the Permanent Distance of Glory

Directory of Open Access Journals (Sweden)

Steve Jones

2009-12-01

Full Text Available The James Brown song ‘I’m Real’ (1988 features lyrics regaled from James Brown’s back catalogue, alongside vocal samples extracted from his earlier hits. As one of the most sampled artists of the hip-hop era, James employed sampling in order to reclaim his position as the “Godfather of Soul” and express his disatisfaction at having his work overtly plundered. The central questions I pose here focus on what the choice to sample himself reveals about Brown’s status as a Soul legend, and whether the contemporaneous James could sincerely live up to the mythic status inherent to the message of ‘I’m Real’ given its self-conscious form. This confusion appears to be an extension of Walter Benjamin’s conception of déjà vu as an acoustic effect - ‘the cool tomb of long ago, from the vault of which the present seems to return only as an echo’ (Benjamin cited in Breyley, 2009: 145 - only here the slippage between past and present is quite literal, involving the discordant imbrication of two divergent temporal states. Via a detailed investigation of the song ‘I’m Real‘, I will probe Brown’s playful employment of his own past. His gambit, I will argue, may be read simultaneously as testament to his own glory, and as a signifier that the excesses of egotistic auto-projection were always more distant than they first appeared to be.

Long-term trends in coast live oak and tanoak stands affected by Phytophthora ramorum canker (Sudden Oak Death)

Science.gov (United States)

Tedmund J. Swiecki; Elizabeth Bernhardt

2010-01-01

Permanent plots were established in 2000 to examine how tree and site factors affect risk of Phytophthora ramorum stem canker (sudden oak death [SOD]) and determine how affected stands change over time due to disease. P. ramorum canker was prevalent in the sampled coast live oak (Quercus agrifolia) or...

Pippi — Painless parsing, post-processing and plotting of posterior and likelihood samples

Science.gov (United States)

Scott, Pat

2012-11-01

Interpreting samples from likelihood or posterior probability density functions is rarely as straightforward as it seems it should be. Producing publication-quality graphics of these distributions is often similarly painful. In this short note I describe pippi, a simple, publicly available package for parsing and post-processing such samples, as well as generating high-quality PDF graphics of the results. Pippi is easily and extensively configurable and customisable, both in its options for parsing and post-processing samples, and in the visual aspects of the figures it produces. I illustrate some of these using an existing supersymmetric global fit, performed in the context of a gamma-ray search for dark matter. Pippi can be downloaded and followed at http://github.com/patscott/pippi.

Field portable low temperature porous layer open tubular cryoadsorption headspace sampling and analysis part I: Instrumentation.

Science.gov (United States)

Bruno, Thomas J

2016-01-15

Building on the successful application in the laboratory of PLOT-cryoadsorption as a means of collecting vapor (or headspace) samples for chromatographic analysis, in this paper a field portable apparatus is introduced. This device fits inside of a briefcase (aluminum tool carrier), and can be easily transported by vehicle or by air. The portable apparatus functions entirely on compressed air, making it suitable for use in locations lacking electrical power, and for use in flammable and explosive environments. The apparatus consists of four aspects: a field capable PLOT-capillary platform, the supporting equipment platform, the service interface between the PLOT-capillary and the supporting equipment, and the necessary peripherals. Vapor sampling can be done with either a hand piece (containing the PLOT capillary) or with a custom fabricated standoff module. Both the hand piece and the standoff module can be heated and cooled to facilitate vapor collection and subsequent vapor sample removal. The service interface between the support platform and the sampling units makes use of a unique counter current approach that minimizes loss of cooling and heating due to heat transfer with the surroundings (recuperative thermostatting). Several types of PLOT-capillary elements and sampling probes are described in this report. Applications to a variety of samples relevant to forensic and environmental analysis are discussed in a companion paper. Published by Elsevier B.V.

Graphical augmentations to the funnel plot assess the impact of additional evidence on a meta-analysis.

Science.gov (United States)

Langan, Dean; Higgins, Julian P T; Gregory, Walter; Sutton, Alexander J

2012-05-01

We aim to illustrate the potential impact of a new study on a meta-analysis, which gives an indication of the robustness of the meta-analysis. A number of augmentations are proposed to one of the most widely used of graphical displays, the funnel plot. Namely, 1) statistical significance contours, which define regions of the funnel plot in which a new study would have to be located to change the statistical significance of the meta-analysis; and 2) heterogeneity contours, which show how a new study would affect the extent of heterogeneity in a given meta-analysis. Several other features are also described, and the use of multiple features simultaneously is considered. The statistical significance contours suggest that one additional study, no matter how large, may have a very limited impact on the statistical significance of a meta-analysis. The heterogeneity contours illustrate that one outlying study can increase the level of heterogeneity dramatically. The additional features of the funnel plot have applications including 1) informing sample size calculations for the design of future studies eligible for inclusion in the meta-analysis; and 2) informing the updating prioritization of a portfolio of meta-analyses such as those prepared by the Cochrane Collaboration. Copyright © 2012 Elsevier Inc. All rights reserved.

U.S. Lawful Permanent Residents: Fiscal Year 2013

Data.gov (United States)

Department of Homeland Security — A lawful permanent resident (LPR) or 'green card' recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

OAS :: Authorities : Permanent Representatives to the OAS

Science.gov (United States)

Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber Representative of Belize Diego Pary Rodríguez Bolivia Diego Pary Rodríguez Ambassador, Permanent Representative of Bolivia José Luiz Machado Brazil José Luiz Machado e Costa Ambassador, Permanent Representative

Static devices with new permanent magnets

International Nuclear Information System (INIS)

Chavanne, J.; Laforest, J.; Pauthenet, R.

1987-01-01

The high remanence and coercivity of the new permanent magnet materials are of special interest in the static applications. High ordering temperature and are uniaxial anisotropy at the origin of their good permanent magnet properties are obtained in rare earth-transition metal compounds. Binary SmCo/sub 5/ and Sm/sub 2/Co/sub 17/ and ternary Nd/sub 2/Fe/sub 14/B compounds are the basis materials of the best permanent magnets. new concepts of calculations of static devices with these magnets can be applied: the magnetization can be considered as ridig, the density of the surface Amperian current is constant, the relative permeability is approximately 1 and the induction calculations are linear. Examples of hexapoles with Sm-Co and NdFeB magnets are described and the performances are compared. The problems of temperature behavior and corrosion resistance are underlined

PCR-based identification of selected pathogens associated with endodontic infections in deciduous and permanent teeth.

Science.gov (United States)

Cogulu, Dilsah; Uzel, Atac; Oncag, Ozant; Eronat, Cemal

2008-09-01

The aim of the present study was to evaluate the presence of the selected pathogens in samples from deciduous and permanent tooth root canals by using PCR method and to determine the association of these organisms with clinical symptoms. A total of 145 children, 5 to 13 years old, were involved in this study. The presence of selected pathogens (Actinomyces israelii, Candida albicans, Enterococcus faecalis, Fusobacterium nucleatum, Porphyromonas endodontalis, Porphyromonas gingivalis, Prevotella intermedia, Streptococcus intermedius, Treponema denticola, Parvimonas micra, Tannerella forsythensis, Enterococcus faecium, Prevotella melaninogenica) in infected root canals was studied using PCR. T. denticola (P = .012, .02) and E. faecalis (P = .012, .04) were highly associated with periapical radiolucency and previous pain, while P. gingivalis was associated with tenderness to percussion in both deciduous and permanent teeth (P = .01, .015). The results of the present study confirm that certain species of microorganisms are associated with clinical signs and symptoms of endodontic disease in both deciduous and permanent teeth.

U.S. Legal Permanent Residents: Fiscal Year 2007

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2010

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2008

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2012

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

Samarium-cobalt type rare earth permanent magnets

International Nuclear Information System (INIS)

Kamat, S.V.

2014-01-01

Permanent magnets are one of the oldest and largest applications of magnetic materials and form an integral part of our modern industrial society. They belong to a special class of functional materials and are characterized for remanence (flux output from the magnet), coercivity (resistance to demagnetization) and energy product (material energy density) from the second quadrant of the magnetic hysteresis loop. The reliability, stability, size, weight, cost and performance of many electro-technical devices depend mainly on the properties of permanent magnets used in them. There are three important families of permanent magnets viz., Ferrites, Alnicos and Rare Earth Permanent Magnets (REPMs) with energy product values ranging from 3 to 50 MGOe and among the front ranking high performance REPMs, SmCo 5 , Sm 2 Co 17 type and NdFeB alloys are technologically the most important materials. They are used in a wide range of applications ranging from consumer products to very specialized areas of tele-communications, microelectronics, defence, space, avionics etc. While NdFeB has the highest energy product, Sm-Co based magnets are preferred for most critical applications where temperature stability of magnetic properties is essential because of their significantly higher Curie temperatures. In this presentation some of the key challenges associated with these Sm-Co based rare earth permanent magnets will be highlighted. (author)

Insights into gait disorders: walking variability using phase plot analysis, Parkinson's disease.

Science.gov (United States)

Esser, Patrick; Dawes, Helen; Collett, Johnny; Howells, Ken

2013-09-01

Gait variability may have greater utility than spatio-temporal parameters and can, be an indication for risk of falling in people with Parkinson's disease (PD). Current methods rely on prolonged data collection in order to obtain large datasets which may be demanding to obtain. We set out to explore a phase plot variability analysis to differentiate typically developed adults (TDAs) from PD obtained from two 10 m walks. Fourteen people with PD and good mobility (Rivermead Mobility Index≥8) and ten aged matched TDA were recruited and walked over 10-m at self-selected walking speed. An inertial measurement unit was placed over the projected centre of mass (CoM) sampling at 100 Hz. Vertical CoM excursion was derived to determine modelled spatiotemporal data after which the phase plot analysis was applied producing a cloud of datapoints. SDA described the spread and SDB the width of the cloud with β the angular vector of the data points. The ratio (∀) was defined as SDA: SDB. Cadence (p=.342) and stride length (p=.615) did not show a significance between TDA and PD. A difference was found for walking speed (p=.041). Furthermore a significant difference was found for β (p=.010), SDA (p=.004) other than SDB (p=.385) or ratio ∀ (p=.830). Two sequential 10-m walks showed no difference in PD for cadence (p=.193), stride length (p=.683), walking speed (p=.684) and β (p=.194), SDA (p=.051), SDB (p=.145) or ∀ (p=.226). The proposed phase plot analysis, performed on CoM motion could be used to reliably differentiate PD from TDA over a 10-m walk. Copyright © 2013 Elsevier B.V. All rights reserved.

Contemplation on Plot and Personification in Tehran Makhuf

Directory of Open Access Journals (Sweden)

Mohammad Pashaei

2013-10-01

Full Text Available  Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.  The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.  Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European

Dalitz plot analysis of $B^0 \\to \\overline{D}^0 \\pi^+\\pi^-$ decays

CERN Document Server

Aaij, Roel; Adinolfi, Marco; Affolder, Anthony; Ajaltouni, Ziad; Akar, Simon; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio Augusto; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Anderson, Jonathan; Andreassen, Rolf; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; d'Argent, Philippe; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Bachmann, Sebastian; Back, John; Badalov, Alexey; Baesso, Clarissa; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Battista, Vincenzo; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Bel, Lennaert; Belogurov, Sergey; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bertolin, Alessandro; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bien, Alexander; Bifani, Simone; Bird, Thomas; Birnkraut, Alex; Bizzeti, Andrea; Blake, Thomas; Blanc, Frédéric; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borghi, Silvia; Borgia, Alessandra; Borsato, Martino; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Brett, David; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Brook, Nicholas; Bursche, Albert; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Campana, Pierluigi; Campora Perez, Daniel; Capriotti, Lorenzo; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carniti, Paolo; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casanova Mohr, Raimon; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cavallero, Giovanni; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chefdeville, Maximilien; Chen, Shanzhen; Cheung, Shu-Faye; Chiapolini, Nicola; Chrzaszcz, Marcin; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Cogoni, Violetta; Cojocariu, Lucian; Collazuol, Gianmaria; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coombes, Matthew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Counts, Ian; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Crocombe, Andrew; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dalseno, Jeremy; David, Pascal; David, Pieter; Davis, Adam; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Silva, Weeraddana; De Simone, Patrizia; Dean, Cameron Thomas; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Déléage, Nicolas; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Dey, Biplab; Di Canto, Angelo; Di Ruscio, Francesco; Dijkstra, Hans; Donleavy, Stephanie; Dordei, Francesca; Dorigo, Mirco; Dosil Suárez, Alvaro; Dossett, David; Dovbnya, Anatoliy; Dreimanis, Karlis; Dujany, Giulio; Dupertuis, Frederic; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; Easo, Sajan; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; El Rifai, Ibrahim; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Hannah Mary; Evans, Timothy; Falabella, Antonio; Färber, Christian; Farinelli, Chiara; Farley, Nathanael; Farry, Stephen; Fay, Robert; Ferguson, Dianne; Fernandez Albor, Victor; Ferrari, Fabio; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fol, Philip; Fontana, Marianna; Fontanelli, Flavio; Forty, Roger; Francisco, Oscar; Frank, Markus; Frei, Christoph; Frosini, Maddalena; Fu, Jinlin; Furfaro, Emiliano; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; García Pardiñas, Julián; Garofoli, Justin; Garra Tico, Jordi; Garrido, Lluis; Gascon, David; Gaspar, Clara; Gastaldi, Ugo; Gauld, Rhorry; Gavardi, Laura; Gazzoni, Giulio; Geraci, Angelo; Gerick, David; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gianelle, Alessio; Gianì, Sebastiana; Gibson, Valerie; Giubega, Lavinia-Helena; Gligorov, V.V.; Göbel, Carla; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gotti, Claudio; Grabalosa Gándara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graverini, Elena; Graziani, Giacomo; Grecu, Alexandru; Greening, Edward; Gregson, Sam; Griffith, Peter; Grillo, Lucia; Grünberg, Oliver; Gui, Bin; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Hampson, Thomas; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; He, Jibo; Head, Timothy; Heijne, Veerle; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adlène; Hill, Donal; Hoballah, Mostafa; Hombach, Christoph; Hulsbergen, Wouter; Humair, Thibaud; Hussain, Nazim; Hutchcroft, David; Hynds, Daniel; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jawahery, Abolhassan; Jing, Fanfan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Karbach, Moritz; Karodia, Sarah; Kelsey, Matthew; Kenyon, Ian; Kenzie, Matthew; Ketel, Tjeerd; Khanji, Basem; Khurewathanakul, Chitsanu; Klaver, Suzanne; Klimaszewski, Konrad; Kochebina, Olga; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Korolev, Mikhail; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krocker, Georg; Krokovny, Pavel; Kruse, Florian; Kucewicz, Wojciech; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kurek, Krzysztof; Kvaratskheliya, Tengiz; La Thi, Viet Nga; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lambert, Robert W; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Lefèvre, Regis; Leflat, Alexander; Lefrançois, Jacques; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Likhomanenko, Tatiana; Liles, Myfanwy; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Lohn, Stefan; Longstaff, Iain; Lopes, Jose; Lucchesi, Donatella; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Machefert, Frederic; Machikhiliyan, Irina V; Maciuc, Florin; Maev, Oleg; Malde, Sneha; Malinin, Alexander; Manca, Giulia; Mancinelli, Giampiero; Manning, Peter Michael; Mapelli, Alessandro; Maratas, Jan; Marchand, Jean François; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Märki, Raphael; Marks, Jörg; Martellotti, Giuseppe; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massafferri, André; Matev, Rosen; Mathe, Zoltan; Matteuzzi, Clara; Mauri, Andrea; Maurin, Brice; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; McSkelly, Ben; Meadows, Brian; Meier, Frank; Meissner, Marco; Merk, Marcel; Milanes, Diego Alejandro; Minard, Marie-Noelle; Mitzel, Dominik Stefan; Molina Rodriguez, Josue; Monteil, Stephane; Morandin, Mauro; Morawski, Piotr; Mordà, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Müller, Janine; Müller, Katharina; Müller, Vanessa; Mussini, Manuel; Muster, Bastien; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen, Thi-Dung; Nguyen-Mau, Chung; Nicol, Michelle; Niess, Valentin; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Novoselov, Alexey; O'Hanlon, Daniel Patrick; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Ogilvy, Stephen; Okhrimenko, Oleksandr; Oldeman, Rudolf; Onderwater, Gerco; Osorio Rodrigues, Bruno; Otalora Goicochea, Juan Martin; Otto, Adam; Owen, Patrick; Oyanguren, Maria Aranzazu; Pal, Bilas Kanti; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Pappalardo, Luciano; Parkes, Christopher; Parkinson, Christopher John; Passaleva, Giovanni; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pearce, Alex; Pellegrino, Antonio; Penso, Gianni; Pepe Altarelli, Monica; Perazzini, Stefano; Perret, Pascal; Pescatore, Luca; Petridis, Konstantinos; Petrolini, Alessandro; Petruzzo, Marco; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pilař, Tomas; Pinci, Davide; Pistone, Alessandro; Playfer, Stephen; Plo Casasus, Maximo; Polci, Francesco; Poluektov, Anton; Polyakov, Ivan; Polycarpo, Erica; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, Cédric; Price, Eugenia; Price, Joseph David; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Quagliani, Renato; Rachwal, Bartolomiej; Rademacker, Jonas; Rakotomiaramanana, Barinjaka; Rama, Matteo; Rangel, Murilo; Raniuk, Iurii; Rauschmayr, Nathalie; Raven, Gerhard; Redi, Federico; Reichert, Stefanie; Reid, Matthew; dos Reis, Alberto; Ricciardi, Stefania; Richards, Sophie; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vincente; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Perez, Pablo; Roiser, Stefan; Romanovsky, Vladimir; Romero Vidal, Antonio; Rotondo, Marcello; Rouvinet, Julien; Ruf, Thomas; Ruiz, Hugo; Ruiz Valls, Pablo; Saborido Silva, Juan Jose; Sagidova, Naylya; Sail, Paul; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santovetti, Emanuele; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Saunders, Daniel Martin; Savrina, Darya; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmelzer, Timon; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Semennikov, Alexander; Sepp, Indrek; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Silva Coutinho, Rafael; Simi, Gabriele; Sirendi, Marek; Skidmore, Nicola; Skillicorn, Ian; Skwarnicki, Tomasz; Smith, Edmund; Smith, Eluned; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Soomro, Fatima; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Spradlin, Patrick; Sridharan, Srikanth; Stagni, Federico; Stahl, Marian; Stahl, Sascha; Steinkamp, Olaf; Stenyakin, Oleg; Sterpka, Christopher Francis; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Stroili, Roberto; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Swientek, Stefan; Syropoulos, Vasileios; Szczekowski, Marek; Szczypka, Paul; Szumlak, Tomasz; T'Jampens, Stephane; Tekampe, Tobias; Teklishyn, Maksym; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Todd, Jacob; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Torr, Nicholas; Tournefier, Edwige; Tourneur, Stephane; Trabelsi, Karim; Tran, Minh Tâm; Tresch, Marco; Trisovic, Ana; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tuning, Niels; Ubeda Garcia, Mario; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vacca, Claudia; Vagnoni, Vincenzo; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vázquez Sierra, Carlos; Vecchi, Stefania; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Vollhardt, Achim; Volyanskyy, Dmytro; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; de Vries, Jacco; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wandernoth, Sebastian; Wang, Jianchun; Ward, David; Watson, Nigel; Websdale, David; Whitehead, Mark; Wiedner, Dirk; Wilkinson, Guy; Wilkinson, Michael; Williams, Matthew; Williams, Mike; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wright, Simon; Wyllie, Kenneth; Xie, Yuehong; Xing, Zhou; Xu, Zhirui; Yang, Zhenwei; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zavertyaev, Mikhail; Zhang, Liming; Zhang, Wen Chao; Zhang, Yanxi; Zhelezov, Alexey; Zhokhov, Anatoly; Zhong, Liang

2015-08-07

The resonant substructures of $B^0 \\to \\overline{D}^0 \\pi^+\\pi^-$ decays are studied with the Dalitz plot technique. In this study a data sample corresponding to an integrated luminosity of 3.0 fb$^{-1}$ of $pp$ collisions collected by the LHCb detector is used. The branching fraction of the $B^0 \\to \\overline{D}^0 \\pi^+\\pi^-$ decay in the region $m(\\overline{D}^0\\pi^{\\pm})>2.1$ GeV$/c^2$ is measured to be $(8.46 \\pm 0.14 \\pm 0.29 \\pm 0.40) \\times 10^{-4}$, where the first uncertainty is statistical, the second is systematic and the last arises from the normalisation channel $B^0 \\to D^*(2010)^-\\pi^+$. The $\\pi^+\\pi^-$ S-wave components are modelled with the Isobar and K-matrix formalisms. Results of the Dalitz plot analyses using both models are presented. A resonant structure at $m(\\overline{D}^0\\pi^-) \\approx 2.8$ GeV$/c^{2}$ is confirmed and its spin-parity is determined for the first time as $J^P = 3^-$. The branching fraction, mass and width of this structure are determined together with those of the $D...

Milton Friedman and the Emergence of the Permanent Income Hypothesis

OpenAIRE

Hsiang-Ke Chao

2001-01-01

The purpose of this paper is to investigate the evolution of MiltonFriedman's permanent income hypothesis from the 1940s to 1960s, andhow it became the paradigm of modern consumption theory. Modellingunobservables, such as permanent income and permanent consumption, isa long-standing issue in economics and econometrics. While theconventional approach has been to set an empirical model to make"permanent income" measurable, the historical change in the meaningof that theoretical construct is al...

High resolution NMR imaging using a high field yokeless permanent magnet.

Science.gov (United States)

Kose, Katsumi; Haishi, Tomoyuki

2011-01-01

We measured the homogeneity and stability of the magnetic field of a high field (about 1.04 tesla) yokeless permanent magnet with 40-mm gap for high resolution nuclear magnetic resonance (NMR) imaging. Homogeneity was evaluated using a 3-dimensional (3D) lattice phantom and 3D spin-echo imaging sequences. In the central sphere (20-mm diameter), peak-to-peak magnetic field inhomogeneity was about 60 ppm, and the root-mean-square was 8 ppm. We measured room temperature, magnet temperature, and NMR frequency of the magnet simultaneously every minute for about 68 hours with and without the thermal insulator of the magnet. A simple mathematical model described the magnet's thermal property. Based on magnet performance, we performed high resolution (up to [20 µm](2)) imaging with internal NMR lock sequences of several biological samples. Our results demonstrated the usefulness of the high field small yokeless permanent magnet for high resolution NMR imaging.

High resolution NMR imaging using a high field yokeless permanent magnet

International Nuclear Information System (INIS)

Kose, Katsumi; Haishi, Tomoyuki

2011-01-01

We measured the homogeneity and stability of the magnetic field of a high field (about 1.04 tesla) yokeless permanent magnet with 40-mm gap for high resolution nuclear magnetic resonance (NMR) imaging. Homogeneity was evaluated using a 3-dimensional (3D) lattice phantom and 3D spin-echo imaging sequences. In the central sphere (20-mm diameter), peak-to-peak magnetic field inhomogeneity was about 60 ppm, and the root-mean-square was 8 ppm. We measured room temperature, magnet temperature, and NMR frequency of the magnet simultaneously every minute for about 68 hours with and without the thermal insulator of the magnet. A simple mathematical model described the magnet's thermal property. Based on magnet performance, we performed high resolution (up to [20 μm] 2 ) imaging with internal NMR lock sequences of several biological samples. Our results demonstrated the usefulness of the high field small yokeless permanent magnet for high resolution NMR imaging. (author)

Hydrogen stability of SmCo5 permanent magnet

International Nuclear Information System (INIS)

Lukin, A.; Rabinovich, Y.; Bala, H.

2001-01-01

The present work has been performed with purpose to determine the level of hydrogen stability of sintered SmCo 5 permanent magnets by means of accelerated tests, to study the effect of hydrogen on the magnetic and mechanical properties of the permanent magnets and to establish the criteria of hydrogenation level and the activation energy of this process. In addition, the effect of hydrogen on the properties of sintered SmCo 5 permanent magnets in specific conditions of exploitation and storage durability of instruments was studied

Experimental strategies in carrying out VCU for tobacco crop I: plot design and size.

Science.gov (United States)

Toledo, F H R B; Ramalho, M A P; Pulcinelli, C E; Bruzi, A T

2013-09-19

We aimed to establish standards for tobacco Valor de Cultivo e Uso (VCU) in Brazil. We obtained information regarding the size and design of plots of two varietal groups of tobacco (Virginia and Burley). Ten inbred lines of each varietal group were evaluated in a randomized complete block design with four replications. The plot contained 42 plants with six rows of seven columns each. For each experiment plant, considering the position of the respective plant in the plot (row and column) as a reference, cured leaf weight (g/plant), total sugar content (%), and total alkaloid content (%) were determined. The maximum curvature of the variations in coefficients was estimated. Trials with the number of plants per plot ranging from 2 to 41 were simulated. The use of a border was not justified because the interactions between inbred lines x position in the plots were never significant, showing that the behavior of the inbred lines coincided with the different positions. The plant performance varied according to the column position in the plot. To lessen the effect of this factor, the use of plots with more than one row is recommended. Experimental precision, evaluated by the CV%, increased with an increase in plot size; nevertheless, the maximum curvature of the variation coefficient method showed no expressive increase in precision if the number of plants was greater than seven. The result in identification of the best inbred line, in terms of the size of each plot, coincided with the maximum curvature method.

Climate is a stronger driver of tree and forest growth rates than soil and disturbance

NARCIS (Netherlands)

Toledo, M.; Poorter, L.; Peña-Claros, M.; Alarcón, A.; Balcázar, J.; Leaño, C.; Licona, J.C.; Llanque, O.; Vroomans, V.; Zuidema, P.; Bongers, F.

2011-01-01

1. Essential resources such as water, nutrients and light vary over space and time and plant growth rates are expected to vary accordingly. We examined the effects of climate, soil and logging disturbances on diameter growth rates at the tree and stand level, using 165 1-ha permanent sample plots

Exploration of the forbidden regions of the Ramachandran plot (ϕ-ψ) with QTAIM.

Science.gov (United States)

Momen, Roya; Azizi, Alireza; Wang, Lingling; Ping, Yang; Xu, Tianlv; Kirk, Steven R; Li, Wenxuan; Manzhos, Sergei; Jenkins, Samantha

2017-10-04

A new QTAIM interpretation of the Ramachandran plot is formulated from the most and least facile eigenvectors of the second-derivative matrix of the electron density with a set of 29 magainin-2 peptide conformers. The presence of QTAIM eigenvectors associated with the most and least preferred directions of electronic charge density explained the role of hydrogen bonding, HH contacts and the glycine amino acid monomer in peptide folding. The highest degree of occupation of the QTAIM interpreted Ramachandran plot was found for the glycine amino acid monomer compared with the remaining backbone peptide bonds. The mobility of the QTAIM eigenvectors of the glycine amino acid monomer was higher than for the other amino acids and was comparable to that of the hydrogen bonding, explaining the flexibility of the magainin-2 backbone. We experimented with a variety of hybrid QTAIM-Ramachandran plots to highlight and explain why the glycine amino acid monomer largely occupies the 'forbidden' region on the Ramachandran plot. In addition, the new hybrid QTAIM-Ramachandran plots contained recognizable regions that can be associated with concepts familiar from the conventional Ramachandran plot whilst retaining the character of the QTAIM most and least preferred regions.

The value of building plots in Italy - pdf

Directory of Open Access Journals (Sweden)

Paolo Rosato

2014-12-01

Full Text Available This paper suggests some analysis on dynamics of building plots value in Italy. This is an important subject, since the study of changes in plots value in space and time enables the evaluation of urban rent, which is essential for a fair and effective planning. The analysis confirm past hypothesis which are well known to real estate market operators. The first resulting fact is that the changes in building plots value are concurrent to those in real estate value and the increase occurring in the last years is in relative terms higher than the past one. This seems to confirm that, during real estate market expansion, most of the increase of buildings’ value is attributable to the land rent. The second observation is about value dynamics over time: it has been observed that, during an expansion in demand, the value significantly increases in central areas, much more than in peripheral ones; this means that absolute rent arising from shortage in urban areas is higher than the differential rent created through urban expansion in peripheral areas. Finally, it was highlighted that the factors affecting the value in building areas play different roles, depending on their location relative to the urban centre, identifying differently structured market segments.

SPECT-series plot-programs for spectral data for the USC-3 computer system

International Nuclear Information System (INIS)

Kawarasaki, Yuuki

1976-01-01

The programs for spectral data plotting, SPECT- series, have been prepared for use in the USC-3 computer system. They are based on the Basic Plot-Subroutine Unit reported previously and used for plot-processing both γ-ray and TOF-spectra. Two programs can process continuously as many data as required, reading from a magnetic-tape file, being of the same format as that in the Magnetic-Tape Base System. Specification of the plot-processing is as follows: the programs can plot (1) any number of data as required on a sheet, (2) in either linear or logarithmic Y-axis scaling, (3) in the arbitrary channel region, and (4) with variable scale-factor. How to program is described in detail. Usage of the representative programs with example outputs is explained. Problems in the improvement of processing speed and utilization efficiency are also discussed. (auth.)

Comparison of shear bond strength of amalgam bonded to primary and permanent dentin

Directory of Open Access Journals (Sweden)

Mahdi S

2008-06-01

Full Text Available Amalgam′s non-adhesive characteristics necessitate cavity preparations incorporating retentive features, which often require the removal of non-carious tooth structure. Use of adhesives beneath amalgam restorations, would be helpful to overcome this disadvantage. This study was undertaken to compare the mean shear bond strength of amalgam bonded to primary and permanent dentin, to evaluate the efficacy of amalgam adhesives in pediatric dentistry.27 primary and 28 permanent posterior teeth with intact buccal or lingual surfaces were grounded to expose dentin and wet-polished with 400-grit silicone carbide paper. Scotchbond Multi Purpose Plus adhesive system was applied to the dentin surfaces and light cured. Amalgam was condensed onto the treated dentin through a plastic mold.shear bond strength testing was done using an Instron Universal testing machine, at a crosshead speed of 0.5 mm/min.The data were analyzed by independent samples t-test The difference among the two groups was not statistically significant (p>0.05 Bonded amalgam showed the same level of bond strength to primary and permanent dentin; so, application of amalgam bonding agents in pediatric dentistry can be recommended.

Elective extractions of first permanent molars: a review

Directory of Open Access Journals (Sweden)

Melike Kiraz

2018-05-01

Full Text Available Permanent first molar teeth possess a key role in the setting-up of the occlusion, contribute significantly to the chewing function and serve as a guide for other teeth. However, it is frequently encountered that permanent first molar teeth are extracted due to the predicted negative prognoses of caries or developmental defects. As a result of the uncontrolled extraction of the permanent first molar teeth during the growth and development period, drifting of adjacent teeth, continued eruption of the opposing teeth and displacements can be seen. Furthermore, following one-sided extraction, midline deviations, oppositional tooth eruption, skeletal and dental asymmetry, unilateral chewing habits, and temporo-mandibular joint disorders may occur. To prevent these pathological conditions and to maintain the stability of the occlusal relation, it is necessary to do compensation and balancing extractions of the permanent first molar teeth on the opposite/symmetric arc, assuming mesial drag of the permanent second and third molar teeth. With such controlled-extractions, especially in Class I cases, orthodontic or prosthetic treatments, which may require extra time, cost and effort, could be prevented and a conceivable occlusion can be established.

PENGUKURAN PERMANENT EARNINGS PADA HUBUNGAN DENGAN KEBIJAKAN DIVIDEND PERUSAHAAN : REVIEW PENELITIAN

Directory of Open Access Journals (Sweden)

Wahyu Manuhara Putra

2016-02-01

Full Text Available Corporate earnings divided into a permanent component of earnings and transitory earnings will be very useful in estimating the future value of the company, that will be useful in decision making stock return. Be more relevant for investors and financial analysts in analyzing the earnings based on the permanent and transitory earnings. On permanent earnings will be more focused to get the gain from investments. One focus of research is based on this component is to test the relationship with the earnings dividend payment policy. Based on several studies obtained different results concerning the relationship with the permanent earnings dividend policy. Research that focuses on permanent earnings using two approaches to determine the accuracy of the proxy of permanent earnings. Determination of permanent earnings through the stock price and the latter by using the accounting profit.

76 FR 78698 - Proposed Revocation of Permanent Variances

Science.gov (United States)

2011-12-19

... Administration (``OSHA'' or ``the Agency'') granted permanent variances to 24 companies engaged in the... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0054] Proposed Revocation of Permanent Variances AGENCY: Occupational Safety and Health Administration (OSHA...

Permanent magnet based dipole magnets for next generation light sources

Directory of Open Access Journals (Sweden)

Takahiro Watanabe

2017-07-01

Full Text Available We have developed permanent magnet based dipole magnets for the next generation light sources. Permanent magnets are advantageous over electromagnets in that they consume less power, are physically more compact, and there is a less risk of power supply failure. However, experience with electromagnets and permanent magnets in the field of accelerators shows that there are still challenges to replacing main magnets of accelerators for light sources with permanent magnets. These include the adjustability of the magnetic field, the temperature dependence of permanent magnets, and the issue of demagnetization. In this paper, we present a design for magnets for future light sources, supported by experimental and numerical results.

Combining FIA plot data with topographic variables: Are precise locations needed?

Science.gov (United States)

Stephen P. Prisley; Huei-Jin Wang; Philip J Radtke; John Coulston

2009-01-01

Plot data from the USFS FIA program could be combined with terrain variables to attempt to explain how terrain characteristics influence forest growth, species composition, productivity, fire behavior, wildlife habitat, and other phenomena. While some types of analyses using FIA data have been shown to be insensitive to precision of plot locations, it has been...

shinyCircos: an R/Shiny application for interactive creation of Circos plot.

Science.gov (United States)

Yu, Yiming; Ouyang, Yidan; Yao, Wen

2018-04-01

Creation of Circos plot is one of the most efficient approaches to visualize genomic data. However, the installation and use of existing tools to make Circos plot are challenging for users lacking of coding experiences. To address this issue, we developed an R/Shiny application shinyCircos, a graphical user interface for interactive creation of Circos plot. shinyCircos can be easily installed either on computers for personal use or on local or public servers to provide online use to the community. Furthermore, various types of Circos plots could be easily generated and decorated with simple mouse-click. shinyCircos and its manual are freely available at https://github.com/venyao/shinyCircos. shinyCircos is deployed at https://yimingyu.shinyapps.io/shinycircos/ and http://shinycircos.ncpgr.cn/ for online use. diana1983941@mail.hzau.edu.cn or yaowen@henau.edu.cn.

Radiation hardness of permanent magnets of NdFeB in high energy neutron fields

International Nuclear Information System (INIS)

Shchegolev, V.Yu.

2003-01-01

Magnetic properties of NdFeB permanent magnet samples were measured before and after irradiation with conditions similar to conditions of DRIBs (phase 1) (FLNR, JINR) facility. Demagnetization of the samples after 8-day irradiation was found to be in the range of 17 to 87 %. Estimation of magnet 'life time' was made in the case of setting up these magnets on ECR ion source of DRIBs (phase 1) facility. Possible reasons of considerable demagnetization of the magnets are discussed. (author)

Radiation Hardness of Permanent Magnets of NdFeB in High Energy Neutrons Field

CERN Document Server

Schegolev, V Yu

2003-01-01

Magnetic properties of NdFeB permanent magnet samples were measured before and after irradiation with conditions similar to conditions of DRIBs (phase 1) (FLNR, JINR) facility. Demagnetization of the samples after 8-day irradiation was found to be in the range of 17 to 87 \\%. Estimation of magnet "life tim" was made in the case of setting up these magnets on ECR ion source of DRIBs (phase 1) facility. Possible reasons of considerable demagnetization of the magnets are discussed.

Radiation hardness of permanent magnets of NdFeB in high energy neutron fields

CERN Document Server

Shchegolev, V Y

2003-01-01

Magnetic properties of NdFeB permanent magnet samples were measured before and after irradiation with conditions similar to conditions of DRIBs (phase 1) (FLNR, JINR) facility. Demagnetization of the samples after 8-day irradiation was found to be in the range of 17 to 87 %. Estimation of magnet 'life time' was made in the case of setting up these magnets on ECR ion source of DRIBs (phase 1) facility. Possible reasons of considerable demagnetization of the magnets are discussed.

Permanent tracheostomy: Its social impacts and their management ...

African Journals Online (AJOL)

Background: Upper respiratory tract obstruction resulting from bilateral recurrent laryngeal nerve damage is commonly managed with permanent tracheostomy in our environment. Objective: To evaluate the social impacts of permanent tracheostomy and its management in Ondo State, Southwest Nigeria. Materials and ...

[Effects of slopes on nitrogen transport along with runoff from sloping plots on a lateritic red soil amended with sewage sludge].

Science.gov (United States)

Chen, Yan-Hui; Chen, Ming-Hua; Wang, Guo; Chen, Wen-Xiang; Yang, Shun-Cheng; Chai, Peng

2010-10-01

The effects of different slopes on nitrogen transport along with runoff from sloping plots amended with sewage sludge on a lateritic red soil were studied under simulated rainfall conditions. When the sludge was broadcasted and mixed with surface soils (BM), the MTN (total nitrogen of mixing sample), STN (total nitrogen of settled sample), TPN (total particulate nitrogen), TSN (total suspended nitrogen), TDN (total dissolved nitrogen) and NH4(+) -N concentrations and nitrogen loss amounts in runoff of all treatments were highest at 1 day or 18 days after application. The highest concentrations and the loss amounts of MTN and STN in the slope runoff for the BM treatment increased with slope degree, showing increasing pollution risks to the surface waters. The STN concentration and loss amounts from the 25 degrees plots were 126.1 mg x L(-1) and 1788.6 mg x m(-2), respectively, being 4.6 times and 5.8 times of the corresponding values from the 10 degrees plots, respectively. Then the concentrations and the loss amounts of nitrogen (except NO3(-) -N) from the BM plots diminished rapidly first and then tended to be stable with dwindling differences between the slopes. The loss of MTN and STN in early runoff (1 day and 18 days) accounted for 68.6% -73.4% and 62.3% -66.7% of the cumulative loss amounts during the experimental period for all the broadcasted treatments. Runoff loss coefficients of MTN increased in the order of 20 degrees > 25 degrees > 15 degrees > 10 degrees. Nitrogen was largely lost in dissolved species while large portion of NH4(+) -N was lost with particulates.

Sampling efficiency for species composition assessments using the ...

African Journals Online (AJOL)

A pilot survey to determine the sampling efficiency of the wheel-point method, using the nearest plant method, to assess species composition (using replicate similarity related to sampling intensity, and total sampling time) was conducted on three plot sizes (20 x 20m, 30 x 30m, 40 x 40m) at two sites in a semi-arid savanna.

A quantitative study of cerebral blood flow in childhood using {sup 99m}Tc-ECD patlak-plot method

Energy Technology Data Exchange (ETDEWEB)

Yamamori, Hiroyuki; Kohira, Ryutaro; Fujita, Yukihiko [Nihon Univ., Tokyo (Japan). School of Medicine] (and others)

2001-12-01

Mean cerebral blood flow (mCBF) was measured by SPECT using the {sup 99m}Tc-ECD Patlak-Plot method in 54 subjects (age: 1 to 14 years). Regional cerebral blood flow (rCBF) values were obtained using Lassen's correction algorithm. The mCBF values were 52.2 ml/100 g/min in those aged 1-4 years, 49.3 ml/100 g/min in those aged 5-9 years, and 48.1 ml/100 g/min in those aged 10-14 years. There was a slight decrease with advancing age. The rCBF in the frontal region was lower than in other regions in those aged 1-4 years. The Patlak-Plot method is suitable for examination of children, because it does not require arterial blood sampling. (author)

First Permanent Molars and Permanent Incisors Teeth by Tooth Prevalence of Molar–Incisor–Hypomineralisation in a Group of Spanish Schoolchildren

Directory of Open Access Journals (Sweden)

Juan-Ramón Boj

2018-01-01

Full Text Available Background: Molar-incisor-hypomineralisation (MIH is a disturbance in dental development that commonly involves first permanent molars but permanent incisors may also be compromised. The prevalence of MIH in the literature varies between 2.5% and 40% of the world child population. Little information is gained on the prevalence of MIH among children in Spain. Aim: The aim of this study was to investigate the prevalence of MIH among school children from Barcelona, Spain. Material and methods: A cross-sectional study which included 705 children, aged 6 -14 years and 11 months was carried out. Full mouth examinations were performed using the European Academy of Paediatric Dentistry (EAPD criteria for the diagnosis of MIH. Results: A total of 56 cases of MIH were found, 22 (39.3% boys and 34 (60.7% girls. The prevalence was 7.94% (6.39% for boys and 9.41% for girls. MIH lesions were seen more often in girls than boys (c2 = 4.9, p= 0.023 the male/female ratio being 1:1.54. Upper teeth were more prevalent than lower teeth in both genders with an upper/lower ratio of 1.86/1 for boys and 1.68/1 for girls. Conclusion: Considered either by gender or by teeth, upper teeth and girls were ahead in our sample.

Portable and Airborne Small Footprint LiDAR: Forest Canopy Structure Estimation of Fire Managed Plots

Directory of Open Access Journals (Sweden)

Claudia M.C.S. Listopad

2011-06-01

Full Text Available This study used an affordable ground-based portable LiDAR system to provide an understanding of the structural differences between old-growth and secondary-growth Southeastern pine. It provided insight into the strengths and weaknesses in the structural determination of portable systems in contrast to airborne LiDAR systems. Portable LiDAR height profiles and derived metrics and indices (e.g., canopy cover, canopy height were compared among plots with different fire frequency and fire season treatments within secondary forest and old growth plots. The treatments consisted of transitional season fire with four different return intervals: 1-yr, 2-yr, 3-yr fire return intervals, and fire suppressed plots. The remaining secondary plots were treated using a 2-yr late dormant season fire cycle. The old growth plots were treated using a 2-yr growing season fire cycle. Airborne and portable LiDAR derived canopy cover were consistent throughout the plots, with significantly higher canopy cover values found in 3-yr and fire suppressed plots. Portable LiDAR height profile and metrics presented a higher sensitivity in capturing subcanopy elements than the airborne system, particularly in dense canopy plots. The 3-dimensional structures of the secondary plots with varying fire return intervals were dramatically different to old-growth plots, where a symmetrical distribution with clear recruitment was visible. Portable LiDAR, even though limited to finer spatial scales and specific biases, is a low-cost investment with clear value for the management of forest canopy structure.

The potential of UAS imagery for soil mapping at the agricultural plot scale

Science.gov (United States)

Gilliot, Jean-Marc; Michelin, Joël; Becu, Maxime; Cissé, Moustapha; Hadjar, Dalila; Vaudour, Emmanuelle

2017-04-01

Soil mapping is expensive and time consuming. Airborne and satellite remote sensing data have already been used to predict some soil properties but now Unmanned Aerial Systems (UAS) allow to do many images acquisitions in various field conditions in favour of developing methods for better prediction models construction. This study propose an operational method for spatial prediction of soil properties (organic carbon, clay) at the scale of the agricultural plot by using UAS imagery. An agricultural plot of 28 ha, located in the western region of Paris France, was studied from March to May 2016. An area of 3.6 ha was delimited within the plot and a total of 16 flights were completed. The UAS platforms used were the eBee fixed wing provided by Sensefly® flying at an altitude from 60m to 130m and the iris+ 3DR® Quadcopter (from 30m to 100m). Two multispectral visible near-infrared cameras were used: the AirInov® MultiSPEC 4C® and the Micasense® RedEdge®. 42 ground control points (GCP) were sampled within the 3.6 ha plot. A centimetric Trimble Geo 7x DGPS was used to determine precise GCP positions. On each GCP the soil horizons were described and the top soil were sampled for standard physico-chemical analysis. Ground spectral measurements with a Spectral Evolution® SR-3500 spectroradiometer were made synchronously with the drone flights. 22 additional GCP were placed around the 3.6 ha area in order to realize a precise georeferencing. The multispectral mosaics were calculated using the Agisoft Photoscan® software and all mapping processings were done with the ESRI ArcGIS® 10.3 software. The soil properties were estimated by partial least squares regression (PLSR) between the laboratory analyses and the multispectral information of the UAS images, with the PLS package of the R software. The objective was to establish a model that would achieve an acceptable prediction quality using minimum number of points. For this, we tested 5 models with a decreasing

Behavior of QQ-plots and genomic control in studies of gene-environment interaction.

Directory of Open Access Journals (Sweden)

Arend Voorman

2011-05-01

Full Text Available Genome-wide association studies of gene-environment interaction (GxE GWAS are becoming popular. As with main effects GWAS, quantile-quantile plots (QQ-plots and Genomic Control are being used to assess and correct for population substructure. However, in G x E work these approaches can be seriously misleading, as we illustrate; QQ-plots may give strong indications of substructure when absolutely none is present. Using simulation and theory, we show how and why spurious QQ-plot inflation occurs in G x E GWAS, and how this differs from main-effects analyses. We also explain how simple adjustments to standard regression-based methods used in G x E GWAS can alleviate this problem.

Aquatic insect assemblages of man-made permanent ponds, Buenos Aires city, Argentina.

Science.gov (United States)

Fontanarrosa, M S; Collantes, M B; Bachmann, A O

2013-02-01

Freshwater habitats are important elements within urban green space and they are endangered by various types of human activity. With the aim to increase the knowledge about species biodiversity in urban ecosystems, we characterised the assemblages of aquatic insects in four permanent man-made ponds in Buenos Aires city (Argentina) during a 1-year period. We recorded 32 species with Sigara spp. (Hemiptera) as the most abundant. The removal of aquatic vegetation from the studied ponds may have affected both the establishment and permanence of the insect community. Swimmers were the dominant group in the studied sites, followed by burrowers and sprawlers, and only a few strictly climbers were collected. Therefore, all sampled ponds were dominated by collectors (principally gatherers), secondarily by predators and only few shredders were detected, which was much affected by the removal of macrophytes. Non-parametric abundance indexes estimated a number of species very close to the observed number in each site. Conversely, the incidence indexes estimated more species because there were many more taxa present only in one sample than those represented by few individual in a sample. Our data provides some insights on the community of man-made ponds that can improve the management of these aquatic urban habitats. Considering that macrophytes affect animal assemblages due to their role as physical structures that increase the complexity or heterogeneity of habitats, they should not be removed by authorities in order to promote biodiversity.

Special-Purpose High-Torque Permanent-Magnet Motors

Science.gov (United States)

Doane, George B., III

1995-01-01

Permanent-magnet brushless motors that must provide high commanded torques and satisfy unusual heat-removal requirement are developed. Intended for use as thrust-vector-control actuators in large rocket engines. Techniques and concepts used to design improved motors for special terrestrial applications. Conceptual motor design calls for use of rotor containing latest high-energy-product rare-earth permanent magnets so that motor produces required torque while drawing smallest possible currents from power supply. Torque generated by electromagnetic interaction between stator and permanent magnets in rotor when associated electronic circuits applied appropriately temporally and spatially phased currents to stator windings. Phase relationships needed to produce commanded torque computed in response to torque command and to electronically sensed angular position of rotor relative to stator.

Modeling demagnetization effects in permanent magnet synchronous machines

NARCIS (Netherlands)

Kral, C.; Sprangers, R.L.J.; Waarma, J.; Haumer, A.; Winter, O.; Lomonova, E.

2010-01-01

This paper presents a permanent magnet model which takes temperature dependencies and demagnetization effects into account. The proposed model is integrated into a magnetic fundamental wave machine model using the model- ing language Modelica. For different rotor types permanent magnet models are

Modeling of ironless permanent magnet planar motor structures

NARCIS (Netherlands)

Boeij, de J.; Lomonova, E.A.; Vandenput, A.J.A.

2006-01-01

This paper describes an analytical model that includes end effects for ironless synchronous permanent-magnet planar actuators. Because of its flexibility, the model can be used to predict the performance of various permanent-magnet array and coil array topologies and commutation schemes. Moreover,

Similarity-dissimilarity plot for visualization of high dimensional data in biomedical pattern classification.

Science.gov (United States)

Arif, Muhammad

2012-06-01

In pattern classification problems, feature extraction is an important step. Quality of features in discriminating different classes plays an important role in pattern classification problems. In real life, pattern classification may require high dimensional feature space and it is impossible to visualize the feature space if the dimension of feature space is greater than four. In this paper, we have proposed a Similarity-Dissimilarity plot which can project high dimensional space to a two dimensional space while retaining important characteristics required to assess the discrimination quality of the features. Similarity-dissimilarity plot can reveal information about the amount of overlap of features of different classes. Separable data points of different classes will also be visible on the plot which can be classified correctly using appropriate classifier. Hence, approximate classification accuracy can be predicted. Moreover, it is possible to know about whom class the misclassified data points will be confused by the classifier. Outlier data points can also be located on the similarity-dissimilarity plot. Various examples of synthetic data are used to highlight important characteristics of the proposed plot. Some real life examples from biomedical data are also used for the analysis. The proposed plot is independent of number of dimensions of the feature space.

Permanence and asymptotic behaviors of stochastic predator-prey system with Markovian switching and Lévy noise

Science.gov (United States)

Wang, Sheng; Wang, Linshan; Wei, Tengda

2018-04-01

This paper concerns the dynamics of a stochastic predator-prey system with Markovian switching and Lévy noise. First, the existence and uniqueness of global positive solution to the system is proved. Then, by combining stochastic analytical techniques with M-matrix analysis, sufficient conditions of stochastic permanence and extinction are obtained. Furthermore, for the stochastic permanence case, by means of four constants related to the stationary probability distribution of the Markov chain and the parameters of the subsystems, both the superior limit and the inferior limit of the average in time of the sample path of the solution are estimated. Finally, our conclusions are illustrated through an example.

Experts’ Misinterpretation of Box Plots – a Dual Processing Approach

Directory of Open Access Journals (Sweden)

Stephanie Lem

2014-11-01

Full Text Available Recent studies have shown that students often misinterpret the area of the box in box plots as representing the frequency or proportion of observations in that interval, while it actually represents density. This misinterpretation has been shown to be based on the saliency of this area and can be explained by heuristic reasoning as defined by dual process theories. In this study we tested whether expert users of box plots also display this misinterpretation and show signs of the same heuristic reasoning as found in students. Using a reaction time test, we found signs of heuristic reasoning in experts, both with respect to accuracy and reaction times. If even experts have difficulty interpreting box plots, one can question whether these are an appropriate form of representation to use when reporting data and deserve the prominent place they currently have in the statistics curriculum.

[Object permanence in children with neurological and psychomotor disorders].

Science.gov (United States)

Pisaturo, C; Frassoni, S; Borreani, A; Battaglia, F; Meruzzi, B

1995-06-01

The aim of this research was to investigate whether the development of object permanence is an available sign of the cognitive development in infants with psychomotor handicaps. Subjects consisted of 5 males, ranging in age from 12 to 33 months, with handicaps as a result of perinatal brain injury. Four were preterm infants. All of the children received psychomotor treatment. Their stage of object permanence was assessed using traditional (B-L) and non traditional test (U-H). (The children's performances on the U-H scales have an "Intrinsic validity"). Four children achieved the first stages of the development of object permanence. The acquisition of object permanence was delayed in comparison with the age-appropriated time, but it may be considered adequate in comparison with the "developmental age" (B-L). One children with severe mental and motor disorders solved no task, the findings suggest that the children with psychomotor handicaps may gain the concept of object permanence and that psychomotor treatment may assist them in the development of the concept. This performance is not age-dependent. So the acquisition of the concept of object permanence may be considered an accurate and sensitive tool for the follow-up of the sensorimotor development in the handicapped children.

Mars Science Laboratory Launch-Arrival Space Study: A Pork Chop Plot Analysis

Science.gov (United States)

Cianciolo, Alicia Dwyer; Powell, Richard; Lockwood, Mary Kae

2006-01-01

Launch-Arrival, or "pork chop", plot analysis can provide mission designers with valuable information and insight into a specific launch and arrival space selected for a mission. The study begins with the array of entry states for each pair of selected Earth launch and Mars arrival dates, and nominal entry, descent and landing trajectories are simulated for each pair. Parameters of interest, such as maximum heat rate, are plotted in launch-arrival space. The plots help to quickly identify launch and arrival regions that are not feasible under current constraints or technology and also provide information as to what technologies may need to be developed to reach a desired region. This paper provides a discussion of the development, application, and results of a pork chop plot analysis to the Mars Science Laboratory mission. This technique is easily applicable to other missions at Mars and other destinations.

A comparison of groundwater investigation using temporary points versus permanent monitoring wells

International Nuclear Information System (INIS)

Thompson, N.T.

1994-01-01

Groundwater investigation within the environmental industry is most often conducted using permanent monitoring wells. A monitoring well, as the term suggests, is permanent to the extent that it is fixed in place to monitor groundwater quality in its immediate vicinity at any given time over the course of an environmental project. Because monitoring wells are relatively time consuming and expensive to construct, a minimum number of wells is normally installed as part of a single investigation event. The initial information obtained from monitoring wells could also be obtained from temporary groundwater sampling points. Temporary points generally are smaller in diameter than monitoring wells, are installed to provide a one time snap shot of the subsurface, and are removed at the completion of the investigation. Since temporary points are usually easier to install and less expensive than monitoring wells, more temporary points can be installed over a single investigation event and can often reduce or eliminate subsequent assessment(s). A brief discussion of temporary point installation and sampling is offered before considering two case studies within the context of the above advantages to temporary point installation. One case study focuses on vertical delineation of dissolved petroleum hydrocarbons, while the second case study discusses lateral delineation of light nonaqueous phase liquid (LNAPL)

Permanent magnets and its production by powder metallurgy

Directory of Open Access Journals (Sweden)

Enrique Herraiz Lalana

2018-06-01

Full Text Available In this work, the historical relationship between permanent magnets and powder metallurgy is reviewed. Powder metallurgy is a manufacturing technique based on the compaction of powders that are sintered to create a solid product. This technique was used in the production of permanent magnets for the first time in the 18th century and, nowadays, most permanent magnetic materials are manufacturing by this mean. Magnetic properties are highly dependent on the microstructure of the final product, the magnetic alignment of domains and presence of porosity, to mention a few, and powder metallurgy enables fine control of these factors.

Shortened of the crown and root lengths of the mandibular permanent molar in beta major thalassemia children

Directory of Open Access Journals (Sweden)

Indra Primathena

2011-07-01

Full Text Available Beta major thalassemia is a genetically inherited blood disorder due to a genetic mutation on the polypeptide chains of hemoglobin which is manifested in the growth and development of the tooth. The objectives of the investigation were to obtain differences of the crown and root lengths of the mandibular first right side permanent molar between beta major thalassemia children and normal children group at the matching ages of 11 to 13 years old. The descriptive comparative method was used in the study and samples were selected using the purposive sampling technique. Sample numbers, which were obtained using the consecutive sampling technique, consists of 12 children of beta major thalassemia and 12 of normal children at the matching ages of 11 to 13 years. Periapical radiographs of both thalassemia and normal children were administered using the method of Seow and Lai. Data were analyzed using t-test method. The study revealed that the crown and root lengths of the mandibular first right side permanent molar of beta major thalassemia children were shorter than normal children at the ages of 11 to 13 years.

Statistical characterization of a large geochemical database and effect of sample size

Science.gov (United States)

Zhang, C.; Manheim, F.T.; Hinde, J.; Grossman, J.N.

2005-01-01

The authors investigated statistical distributions for concentrations of chemical elements from the National Geochemical Survey (NGS) database of the U.S. Geological Survey. At the time of this study, the NGS data set encompasses 48,544 stream sediment and soil samples from the conterminous United States analyzed by ICP-AES following a 4-acid near-total digestion. This report includes 27 elements: Al, Ca, Fe, K, Mg, Na, P, Ti, Ba, Ce, Co, Cr, Cu, Ga, La, Li, Mn, Nb, Nd, Ni, Pb, Sc, Sr, Th, V, Y and Zn. The goal and challenge for the statistical overview was to delineate chemical distributions in a complex, heterogeneous data set spanning a large geographic range (the conterminous United States), and many different geological provinces and rock types. After declustering to create a uniform spatial sample distribution with 16,511 samples, histograms and quantile-quantile (Q-Q) plots were employed to delineate subpopulations that have coherent chemical and mineral affinities. Probability groupings are discerned by changes in slope (kinks) on the plots. Major rock-forming elements, e.g., Al, Ca, K and Na, tend to display linear segments on normal Q-Q plots. These segments can commonly be linked to petrologic or mineralogical associations. For example, linear segments on K and Na plots reflect dilution of clay minerals by quartz sand (low in K and Na). Minor and trace element relationships are best displayed on lognormal Q-Q plots. These sensitively reflect discrete relationships in subpopulations within the wide range of the data. For example, small but distinctly log-linear subpopulations for Pb, Cu, Zn and Ag are interpreted to represent ore-grade enrichment of naturally occurring minerals such as sulfides. None of the 27 chemical elements could pass the test for either normal or lognormal distribution on the declustered data set. Part of the reasons relate to the presence of mixtures of subpopulations and outliers. Random samples of the data set with successively

Variable Selection Strategies for Small-area Estimation Using FIA Plots and Remotely Sensed Data

Science.gov (United States)

Andrew Lister; Rachel Riemann; James Westfall; Mike Hoppus

2005-01-01

The USDA Forest Service's Forest Inventory and Analysis (FIA) unit maintains a network of tens of thousands of georeferenced forest inventory plots distributed across the United States. Data collected on these plots include direct measurements of tree diameter and height and other variables. We present a technique by which FIA plot data and coregistered...

Crop residue decomposition in Minnesota biochar-amended plots

Science.gov (United States)

Weyers, S. L.; Spokas, K. A.

2014-06-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different plant-based feedstocks and pyrolysis platforms in the fall of 2008. Litterbags containing wheat straw material were buried in July of 2011 below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a uncharred wood-pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Overall, these findings indicate that no significant alteration in the microbial dynamics of the soil decomposer communities occurred as a consequence of the application of plant-based biochars evaluated here.

Crop residue decomposition in Minnesota biochar amended plots

Science.gov (United States)

Weyers, S. L.; Spokas, K. A.

2014-02-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different feedstocks and pyrolysis platforms prior to the start of this study. Litterbags containing wheat straw material were buried below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a non-charred wood pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Though no significant impacts were observed with field-weathered biochars, effective soil management may yet have to account for repeat applications of biochar.

Dalitz Plot Analysis of the Decay B+ -> K+K+K-

Energy Technology Data Exchange (ETDEWEB)

Dvoretskii, Alexei; /SLAC /Caltech

2006-05-05

The authors perform an analysis of the three-body charmless decay B{sup {+-}} {yields} K{sup {+-}}K{sup {+-}}K{sup {-+}} using a sample of 226.0 {+-} 2.5 million B{bar B} pairs collected by the BABAR detector and measure the total branching fraction and Cp asymmetry to be {beta} = (35.2 {+-} 0.9 {+-} 1.6) x 10{sup -6} and A{sub CP} = (-1.7 {+-} 2.6 {+-} 1.5)%. They fit the Dalitz plot distribution using an isobar model and report the measured values of magnitudes and phases of the production coefficients. The decay dynamics is dominated by the K{sup +}K{sup -} S-wave, for which we perform a partial-wave analysis in the region m(K{sup +}K{sup -}) < 2 GeV/c{sup 2}. They find no evidence of CP violation for individual components of the isobar model.

Surveillance of Site A and Plot M report for 1989

International Nuclear Information System (INIS)

Golchert, N.W.

1990-04-01

The results of the environmental monitoring program conducted at Site A/Plot M in the Palos Park Forest Preserve area for CY 1989 are presented. The monitoring program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study had determined that very low levels of hydrogen-3 migrated from the burial ground and was present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to determine the migration pathway of water from the burial ground to the hand-pumped picnic wells, establish if buried radionuclides other than hydrogen-3 have migrated, and generally characterize the radiological environment of the area. 16 refs., 6 figs., 15 tabs

Multiscale Poincaré plots for visualizing the structure of heartbeat time series.

Science.gov (United States)

Henriques, Teresa S; Mariani, Sara; Burykin, Anton; Rodrigues, Filipa; Silva, Tiago F; Goldberger, Ary L

2016-02-09

Poincaré delay maps are widely used in the analysis of cardiac interbeat interval (RR) dynamics. To facilitate visualization of the structure of these time series, we introduce multiscale Poincaré (MSP) plots. Starting with the original RR time series, the method employs a coarse-graining procedure to create a family of time series, each of which represents the system's dynamics in a different time scale. Next, the Poincaré plots are constructed for the original and the coarse-grained time series. Finally, as an optional adjunct, color can be added to each point to represent its normalized frequency. We illustrate the MSP method on simulated Gaussian white and 1/f noise time series. The MSP plots of 1/f noise time series reveal relative conservation of the phase space area over multiple time scales, while those of white noise show a marked reduction in area. We also show how MSP plots can be used to illustrate the loss of complexity when heartbeat time series from healthy subjects are compared with those from patients with chronic (congestive) heart failure syndrome or with atrial fibrillation. This generalized multiscale approach to Poincaré plots may be useful in visualizing other types of time series.

Topology optimization for design of segmented permanent magnet arrays with ferromagnetic materials

Science.gov (United States)

Lee, Jaewook; Yoon, Minho; Nomura, Tsuyoshi; Dede, Ercan M.

2018-03-01

This paper presents multi-material topology optimization for the co-design of permanent magnet segments and iron material. Specifically, a co-design methodology is proposed to find an optimal border of permanent magnet segments, a pattern of magnetization directions, and an iron shape. A material interpolation scheme is proposed for material property representation among air, permanent magnet, and iron materials. In this scheme, the permanent magnet strength and permeability are controlled by density design variables, and permanent magnet magnetization directions are controlled by angle design variables. In addition, a scheme to penalize intermediate magnetization direction is proposed to achieve segmented permanent magnet arrays with discrete magnetization directions. In this scheme, permanent magnet strength is controlled depending on magnetization direction, and consequently the final permanent magnet design converges into permanent magnet segments having target discrete directions. To validate the effectiveness of the proposed approach, three design examples are provided. The examples include the design of a dipole Halbach cylinder, magnetic system with arbitrarily-shaped cavity, and multi-objective problem resembling a magnetic refrigeration device.

Crustal deformations at permanent GPS sites in Denmark

DEFF Research Database (Denmark)

Khan, Shfaqat Abbas; Knudsen, Per; Tscherning, Carl Christian

2005-01-01

The National Survey and Cadastre (KMS) is responsible for the geodetic definition of the reference network in Denmark. Permanent GPS stations play an important role in the monitoring and maintenance of the geodetic network. During 1998 and 1999 KMS established three permanent GPS station in Denma...

Effects of field plot size on prediction accuracy of aboveground biomass in airborne laser scanning-assisted inventories in tropical rain forests of Tanzania.

Science.gov (United States)

Mauya, Ernest William; Hansen, Endre Hofstad; Gobakken, Terje; Bollandsås, Ole Martin; Malimbwi, Rogers Ernest; Næsset, Erik

2015-12-01

Airborne laser scanning (ALS) has recently emerged as a promising tool to acquire auxiliary information for improving aboveground biomass (AGB) estimation in sample-based forest inventories. Under design-based and model-assisted inferential frameworks, the estimation relies on a model that relates the auxiliary ALS metrics to AGB estimated on ground plots. The size of the field plots has been identified as one source of model uncertainty because of the so-called boundary effects which increases with decreasing plot size. Recent research in tropical forests has aimed to quantify the boundary effects on model prediction accuracy, but evidence of the consequences for the final AGB estimates is lacking. In this study we analyzed the effect of field plot size on model prediction accuracy and its implication when used in a model-assisted inferential framework. The results showed that the prediction accuracy of the model improved as the plot size increased. The adjusted R 2 increased from 0.35 to 0.74 while the relative root mean square error decreased from 63.6 to 29.2%. Indicators of boundary effects were identified and confirmed to have significant effects on the model residuals. Variance estimates of model-assisted mean AGB relative to corresponding variance estimates of pure field-based AGB, decreased with increasing plot size in the range from 200 to 3000 m 2 . The variance ratio of field-based estimates relative to model-assisted variance ranged from 1.7 to 7.7. This study showed that the relative improvement in precision of AGB estimation when increasing field-plot size, was greater for an ALS-assisted inventory compared to that of a pure field-based inventory.

Effects of disease severity distribution on the performance of quantitative diagnostic methods and proposal of a novel 'V-plot' methodology to display accuracy values.

Science.gov (United States)

Petraco, Ricardo; Dehbi, Hakim-Moulay; Howard, James P; Shun-Shin, Matthew J; Sen, Sayan; Nijjer, Sukhjinder S; Mayet, Jamil; Davies, Justin E; Francis, Darrel P

2018-01-01

Diagnostic accuracy is widely accepted by researchers and clinicians as an optimal expression of a test's performance. The aim of this study was to evaluate the effects of disease severity distribution on values of diagnostic accuracy as well as propose a sample-independent methodology to calculate and display accuracy of diagnostic tests. We evaluated the diagnostic relationship between two hypothetical methods to measure serum cholesterol (Chol rapid and Chol gold ) by generating samples with statistical software and (1) keeping the numerical relationship between methods unchanged and (2) changing the distribution of cholesterol values. Metrics of categorical agreement were calculated (accuracy, sensitivity and specificity). Finally, a novel methodology to display and calculate accuracy values was presented (the V-plot of accuracies). No single value of diagnostic accuracy can be used to describe the relationship between tests, as accuracy is a metric heavily affected by the underlying sample distribution. Our novel proposed methodology, the V-plot of accuracies, can be used as a sample-independent measure of a test performance against a reference gold standard.

Comparing superconducting and permanent magnets for magnetic refrigeration

DEFF Research Database (Denmark)

Bjørk, Rasmus; Nielsen, Kaspar Kirstein; Bahl, C. R. H.

2016-01-01

We compare the cost of a high temperature superconducting (SC) tape-based solenoidwith a permanent magnet (PM) Halbach cylinder for magnetic refrigeration.Assuming a five liter active magnetic regenerator volume, the price of each type ofmagnet is determined as a function of aspect ratio...... of the regenerator and desiredinternal magnetic field. It is shown that to produce a 1 T internal field in theregenerator a permanent magnet of hundreds of kilograms is needed or an area ofsuperconducting tape of tens of square meters. The cost of cooling the SC solenoidis shown to be a small fraction of the cost...... of the SC tape. Assuming a cost ofthe SC tape of 6000 $/m2 and a price of the permanent magnet of 100 $/kg, thesuperconducting solenoid is shown to be a factor of 0.3-3 times more expensive thanthe permanent magnet, for a desired field from 0.5-1.75 T and the geometrical aspectratio of the regenerator...

2016 Inspection and Annual Site Status Report for the Site A/Plot M, Illinois, Decommissioned Reactor Site July 2016

Energy Technology Data Exchange (ETDEWEB)

Murl, Jeffrey [USDOE Office of Legacy Management, Washington, DC (United States); Miller, Michele [Navarro Research and Engineering, Oak Ridge, TN (United States)

2016-07-01

The Site A/Plot M, Illinois, Decommissioned Reactor Site was inspected on May 17, 2016. The site, located within Cook County forest preserve that is open to the public, was found to be in good condition with one exception. Erosion on top of the grass-covered mound at Plot M continues to be a concern as presented in previous inspections. Ruts form in the soil on top of Plot M as a result of bike traffic using the open field as a pass thru between established bike trails within the forest preserve. Argonne National Laboratory (ANL) who is contracted directly from U.S. Department of Energy (DOE) has filled in the ruts with top soil and reseeding remains an ongoing process. Reseeded areas from 2015 are progressing nicely. No cause for a follow-up inspection was identified. In 2015, ANL plugged and abandoned 8 of 25 monitoring wells (BH41, BH51, BH52, BH54, DH9, DH10, DH13, and DH17). The 17 groundwater monitoring wells remaining at the site were inspected to confirm that they were locked and in good condition. Preliminary environmental monitoring results for 2015 are provided in a draft report titled Surveillance of Site A and Plot M, Report for 2015, prepared by ANL. The report also contains results of an independent analysis conducted by the Illinois Emergency Management Agency on some of the samples collected by ANL in 2015. The draft report states that the results of the surveillance program continue to indicate that the impact of radioactivity at Site A/Plot M is very low and does not endanger the health of those living in the area or visiting the site. The ANL monitoring report will be made available to the public on the DOE Office of Legacy Management public website when it is issued as final. A new county forest preserve campsite opened in 2015 at Bull Frog Lake, which is east of Plot M. Hiking trails connect Bull Frog Lake with Site A/Plot M. The site might receive more traffic from forest preserve visitors now that this new campsite is opened.

Magnetic guns with cylindrical permanent magnets

DEFF Research Database (Denmark)

Vokoun, David; Beleggia, Marco; Heller, Luděk

2012-01-01

The motion of a cylindrical permanent magnet (projectile) inside a tubular permanent magnet, with both magnets magnetized axially, illustrates nicely the physical principles behind the operation of magnetic guns. The force acting upon the projectile is expressed semi-analytically as derivative...... of the magnetostatic interaction energy. For comparison, the forces involved are also calculated numerically using finite elements methods. Based on the conservation of the magnetostatic and kinetic energies, the exit and asymptotic velocities are determined. The derived formulas can be used to optimize the generated...... forces and motion of the inner cylindrical magnet....

Design of permanent magnet synchronous motor within minimum cost

OpenAIRE

Півняк, Геннадій Григорович; Бешта, Олександр Степанович; Фурса, Сергій Григорійович; Neuberger, Nikolaus; Nolle, N.

2010-01-01

The article describes design and simulation experience of permanent magnet synchronous motor (PMSM). The design goal is to develop PMSM of the least possible cost. For that purpose the standard induction motor stator was applied as a basic solution and permanent magnets were installed in rotor. Simulation results are presented, the dependence of efficiency and total loss on magnet material mass are obtained. The optimal value of permanent magnets is estimated for the given electric motor frame.

Diffusional falsification of kinetic constants on Lineweaver-Burk plots.

Science.gov (United States)

Ghim, Y S; Chang, H N

1983-11-07

The effect of mass transfer resistances on the Lineweaver-Burk plots in immobilized enzyme systems has been investigated numerically and with analytical approximate solutions. While Hamilton, Gardner & Colton (1974) studied the effect of internal diffusion resistances in planar geometry, our study was extended to the combined effect of internal and external diffusion in cylindrical and spherical geometries as well. The variation of Lineweaver-Burk plots with respect to the geometries was minimized by modifying the Thiele modulus and the Biot number with the shape factor. Especially for a small Biot number all the three Lineweaver-Burk plots fell on a single line. As was discussed by Hamilton et al. (1974), the curvature of the line for large external diffusion resistances was small enough to be assumed linear, which was confirmed from the two approximate solutions for large and small substrate concentrations. Two methods for obtaining intrinsic kinetic constants were proposed: First, we obtained both maximum reaction rate and Michaelis constant by fitting experimental data to a straight line where external diffusion resistance was relatively large, and second, we obtained Michaelis constant from apparent Michaelis constant from the figure in case we knew maximum reaction rate a priori.

A user's guide of a plotting program PLTJOINT

International Nuclear Information System (INIS)

Sasaki, Makoto; Sato, Wakaei; Nakagawa, Masayuki; Mori, Takamasa

1988-02-01

A plotting program PLTJOINT is able to plot various types of input and output data from neutronics calculations with two dimensional coordinates. These data include cross sections, neutron flux or spectrum, reaction rate distribution and auxiliary data. These are read from the input and output files of the JOINT system and the transport code system using double differential form cross section, and from arbitrary BCD input file. General purpose option is also available. Much care is taken in lettering such as types of characters (italic, Greek letters and characters), super and subscript of alphabet and numeral. Users can design their own characters by using a program IGDRASIL. Most of input data can be read in free format. The code has been programed so flexibly that new functions can be easily added to. (author)

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

2016-01-01

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ 2 ) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States); Herrera-Gomez, Alberto [CINVESTAV-Unidad Queretaro, Queretaro, 76230 (Mexico); Terry, Jeff [Department of Physics, Illinois Institute of Technology, Chicago, IL, 60616 (United States); Linford, Matthew R., E-mail: mrlinford@chem.byu.edu [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States)

2016-11-30

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ{sup 2}) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

The M/G/1 queue with permanent customers

NARCIS (Netherlands)

Boxma, O.J.; Cohen, J.W.

1991-01-01

The authors examine an M/G/1 FCFS (first come, first served) queue with two types of customers: ordinary customers, who arrive according to a Poisson process, and permanent customers, who immediately return to the end of the queue after having received a service. The influence of the permanent

The Impact of Selection, Gene Conversion, and Biased Sampling on the Assessment of Microbial Demography.

Science.gov (United States)

Lapierre, Marguerite; Blin, Camille; Lambert, Amaury; Achaz, Guillaume; Rocha, Eduardo P C

2016-07-01

Recent studies have linked demographic changes and epidemiological patterns in bacterial populations using coalescent-based approaches. We identified 26 studies using skyline plots and found that 21 inferred overall population expansion. This surprising result led us to analyze the impact of natural selection, recombination (gene conversion), and sampling biases on demographic inference using skyline plots and site frequency spectra (SFS). Forward simulations based on biologically relevant parameters from Escherichia coli populations showed that theoretical arguments on the detrimental impact of recombination and especially natural selection on the reconstructed genealogies cannot be ignored in practice. In fact, both processes systematically lead to spurious interpretations of population expansion in skyline plots (and in SFS for selection). Weak purifying selection, and especially positive selection, had important effects on skyline plots, showing patterns akin to those of population expansions. State-of-the-art techniques to remove recombination further amplified these biases. We simulated three common sampling biases in microbiological research: uniform, clustered, and mixed sampling. Alone, or together with recombination and selection, they further mislead demographic inferences producing almost any possible skyline shape or SFS. Interestingly, sampling sub-populations also affected skyline plots and SFS, because the coalescent rates of populations and their sub-populations had different distributions. This study suggests that extreme caution is needed to infer demographic changes solely based on reconstructed genealogies. We suggest that the development of novel sampling strategies and the joint analyzes of diverse population genetic methods are strictly necessary to estimate demographic changes in populations where selection, recombination, and biased sampling are present. © The Author 2016. Published by Oxford University Press on behalf of the Society for

Rainfall influence on plot-scale runoff and soil loss from repeated burning in a Mediterranean-shrub ecosystem, Valencia, Spain

Science.gov (United States)

González-Pelayo, O.; Andreu, V.; Gimeno-García, E.; Campo, J.; Rubio, J. L.

2010-06-01

The effect of a repeated burning on soil hydrology and erosive parameters was studied on a Mediterranean forest soil (Rendzic leptosol) with the aim of identifying the effects of the fire and climatic parameters related to the post-fire runoff and soil loss. The study was carried out in an Experimental Permanent Field Station (La Concordia), close to Valencia (Spain). This field station is located on a calcareous hillside facing SSE, and is composed of nine erosion plots (20 × 4 m). Firstly, experimental fires were performed in June 1995 with two fire treatments (T1 or high severity fire and T2 or moderate severity fire) and a control one (unburnt, T3). The repeated fire (low severity) was carried out in July 2003. The studied period was focused from 18 months before the repeated fire (July 2003) until 18 months after it. Rainfall characteristics of each single event were recorded, which allowed us to statistically distinguish four time periods according to the rainfall intensity and duration: periods I (March 2002 to May 2003) and III (December 2003 to early May 2004) with low intensity and long duration rainfalls, and periods II (June 2003 to November 2003) and IV (late May 2004 to December 2004) with high intensity and short duration rainfalls. Before the 2003 fire, the partial recovery of soil and vegetation from the previous burning in 1995 led to a diminution in the runoff rates (6.5 L m - 2 in burned plots and 1.8 L m - 2 in unburnt ones). Six months later (period II), runoff increased in one order of magnitude (23.9 L m - 2 in burnt plots and 1.1 L m - 2 in the unburnt ones) due, in part, to the short time elapsed from fire until high intensity rainfalls. These differences in runoff production were maintained during the whole post-fire period. Fire effects were reflected in the erosion rates. Soil losses prior to the 2003 fire, in both fire treatments and in the control one, were scant relative to post-fire levels. However, six months after the repeated

Crown-condition classification: a guide to data collection and analysis

Science.gov (United States)

Michael E. Schomaker; Stanley J. Zarnoch; William A. Bechtold; David J. Latelle; William G. Burkman; Susan M. Cox

2007-01-01

The Forest Inventory and Analysis (FIA) Program of the Forest Service, U.S. Department of Agriculture, conducts a national inventory of forests across the United States. A systematic subset of permanent inventory plots in 38 States is currently sampled every year for numerous forest health indicators. One of these indicators, crown-condition classification, is designed...

Modeling Alaska boreal forests with a controlled trend surface approach

Science.gov (United States)

Mo Zhou; Jingjing Liang

2012-01-01

An approach of Controlled Trend Surface was proposed to simultaneously take into consideration large-scale spatial trends and nonspatial effects. A geospatial model of the Alaska boreal forest was developed from 446 permanent sample plots, which addressed large-scale spatial trends in recruitment, diameter growth, and mortality. The model was tested on two sets of...

The Zombie Plot: A Simple Graphic Method for Visualizing the Efficacy of a Diagnostic Test.

Science.gov (United States)

Richardson, Michael L

2016-08-09

One of the most important jobs of a radiologist is to pick the most appropriate imaging test for a particular clinical situation. Making a proper selection sometimes requires statistical analysis. The objective of this article is to introduce a simple graphic technique, an ROC plot that has been divided into zones of mostly bad imaging efficacy (ZOMBIE, hereafter referred to as the "zombie plot"), that transforms information about imaging efficacy from the numeric domain into the visual domain. The numeric rationale for the use of zombie plots is given, as are several examples of the clinical use of these plots. Two online calculators are described that simplify the process of producing a zombie plot.

Three-dimensional quadrupole lenses made with permanent magnets

International Nuclear Information System (INIS)

Ivanov, A.S.

1984-01-01

The performance of accelerator systems with quadrupole magnets can be improved by using permanent magnets in quadrupole lenses. This requires better methods for treating the three-dimensional nature of the magnetic fields and the nonlinear characteristics of the magnets. A numerical method is described for simulating three-dimensional magnetic fields and used to analyze quadrupole lenses and doublets with permanent magnets. The results, which are confirmed experimentally, indicate that both the quadrupole magnetic gradient and the effective field length are changed in permanent-magnet quadrupole lenses when the pole lengths and the gap between the lenses are varied while the other characteristics of the magnets remain unchanged

D-GENIES: dot plot large genomes in an interactive, efficient and simple way.

Science.gov (United States)

Cabanettes, Floréal; Klopp, Christophe

2018-01-01

Dot plots are widely used to quickly compare sequence sets. They provide a synthetic similarity overview, highlighting repetitions, breaks and inversions. Different tools have been developed to easily generated genomic alignment dot plots, but they are often limited in the input sequence size. D-GENIES is a standalone and web application performing large genome alignments using minimap2 software package and generating interactive dot plots. It enables users to sort query sequences along the reference, zoom in the plot and download several image, alignment or sequence files. D-GENIES is an easy-to-install, open-source software package (GPL) developed in Python and JavaScript. The source code is available at https://github.com/genotoul-bioinfo/dgenies and it can be tested at http://dgenies.toulouse.inra.fr/.

Impact of the Superpave hot mix asphalt properties on its permanent deformation behavior

Directory of Open Access Journals (Sweden)

Qasim Zahra

2018-01-01

Full Text Available In Iraq, the severity of rutting has increased in asphalt pavements possibly due to the increase in truck axle loads, tyre pressure, and high pavement temperature in summer. As of late, Superpave has been accounted as an enhanced system for performance based design, analysis of asphalt pavement performance prediction for asphalt concrete mixes. In this research the development of permanent deformation in asphalt concrete under repeated loadings was investigated, Wheel-Tracking apparatus has been used in a factorial testing program during which 44 slab samples were tested to simulate actual pavement. The objectives of the present research include; investigating the main factors affecting rutting in asphalt concrete mixture, quantifying the effect of SBS polymer and steel reinforcement on asphalt concrete mixtures in addition to studying the effect of variables on the asphalt concrete mixes against moisture sensitivity. It has been determined that that increasing of compaction temperature from 110 to 150°C will decrease the permanent deformation by 20.5 and 15.6 percent for coarse and fine gradation control asphalt mixtures, respectively. While the permanent deformation decreases by 21.3 percent when the compaction temperature is increased from 110 to 150°C for coarse gradation SBS modified asphalt mixtures.

Motion of Rydberg atoms with strong permanent-electric-dipole interactions

International Nuclear Information System (INIS)

Gonçalves, Luís Felipe; Thaicharoen, Nithiwadee; Raithel, Georg

2016-01-01

Using classical trajectories simulations, we investigate the dynamics of a cold sample of Rydberg atoms with high permanent electric dipole moments. The dipolar state can be created using an adiabatic passage through an avoided crossing between an S-like state and a linear Stark state. The simulations yield the pair-correlation functions (PCF) of the atom samples, which allow us to extract the motion of Rydberg-atom pairs in the many-body system. The results reveal the strength and the anisotropic character of the underlying interaction. The simulation is employed to test the suitability of experimental methods designed to derive interaction parameters from PCF. Insight is obtained about the stability of the method against variation of experimentally relevant parameters. Transient correlations due to interaction-induced heating are observed. (paper)

A snapshot of soil water composition as an indicator of contrasted redox environments in a hedged farmland plot.

Science.gov (United States)

Albéric, Patrick; Vennink, Aurélie; Cornu, Sophie; Bourennane, Hocine; Bruand, Ary

2009-10-15

While soil water composition has long been recognised as being related to soil type (characteristics of the horizons), the influence of structures resulting from agricultural activities (hedges, ditches, wheel ruts, etc) is still under discussion. This work was undertaken to show that a snapshot of spatial variability of the geochemical characteristics of soil water at the scale of a plot can improve our understanding of soil geochemistry in a farmland setting. We selected a 3 hectare hedged plot located on a hillside, limited by a stream and used as pasture where soils have developed in weathered gneiss. The water depth, electrical conductivity, major ions, temperature, pH, dissolved organic carbon (DOC) content, dissolved oxygen content, fluorescence, alkalinity, Fe(2+), Mn(2+), NO(2)(-), Fe(III) and F(-) contents were measured in 62 auger holes randomly drilled on the site. Four sectors were identified in order to describe the distribution of the main geochemical parameters. Electrical conductivity and some major ions, especially sulphate, had larger concentrations near hedges where oxic conditions prevailed. These features were attributed to the impact of the linear anthropogenic network on the circulation of subsurface soil waters and evapo-transpiration and represent sector I. Dissolved Mn was an indicator of well channelled runoff subsurfaces facilitating the circulation of more highly reducing water (sector III), while DOC probably marked areas drained less well, with a prolonged contact time between soil solutions and organic topsoil horizons (sector II). The presence of dissolved Mn and Fe(II) indicates bottomland anoxic conditions (sector IV). It is concluded that a survey of the chemical composition of soil water may be a direct approach to show the influence of permanent structures on current soil properties and dynamics.

Magnetic properties of high temperature superconductors and their interaction with high energy permanent magnets

International Nuclear Information System (INIS)

Agarwala, A.K.

1990-01-01

Magnetic properties of sintered samples of YBCO ceramic superconductors at various temperatures were measured using a vibrating sample magnetometer (VSM). Also, measurements of forces experienced by a well characterized rare earth-transition metal (RE-TM) permanent magnet (PM) interacting with the superconducting YBCO sample cooled in liquid nitrogen, were performed. Based upon the observed hysteretic magnetization properties of these high temperature superconductors (HTS), the HTS-PM interaction force at liquid nitrogen temperature was calculated from first principle, and finally correlated to the force measurement results. With this analysis, magnetic forces between the same HTS and PM system including the levitation as well as suspension effects at liquid-helium temperature are predicted

Joint inversion of 3-PG using eddy-covariance and inventory plot measurements in temperate-maritime conifer forests: Uncertainty in transient carbon-balance responses to climate change

Science.gov (United States)

Hember, R. A.; Kurz, W. A.; Coops, N. C.; Black, T. A.

2010-12-01

Temperate-maritime forests of coastal British Columbia store large amounts of carbon (C) in soil, detritus, and trees. To better understand the sensitivity of these C stocks to climate variability, simulations were conducted using a hybrid version of the model, Physiological Principles Predicting Growth (3-PG), combined with algorithms from the Carbon Budget Model of the Canadian Forest Sector - version 3 (CBM-CFS3) to account for full ecosystem C dynamics. The model was optimized based on a combination of monthly CO2 and H2O flux measurements derived from three eddy-covariance systems and multi-annual stemwood growth (Gsw) and mortality (Msw) derived from 1300 permanent sample plots by means of Markov chain Monte Carlo sampling. The calibrated model serves as an unbiased estimator of stemwood C with enhanced precision over that of strictly-empirical models, minimized reliance on local prescriptions, and the flexibility to study impacts of environmental change on regional C stocks. We report the contribution of each dataset in identifying key physiological parameters and the posterior uncertainty in predictions of net ecosystem production (NEP). The calibrated model was used to spin up pre-industrial C pools and estimate the sensitivity of regional net carbon balance to a gradient of temperature changes, λ=ΔC/ΔT, during three 62-year harvest rotations, spanning 1949-2135. Simulations suggest that regional net primary production, tree mortality, and heterotrophic respiration all began increasing, while NEP began decreasing in response to warming following the 1976 shift in northeast-Pacific climate. We quantified the uncertainty of λ and how it was mediated by initial dead C, tree mortality, precipitation change, and the time horizon in which it was calculated.

Influence of repeated permanent coloring and bleaching on ethyl glucuronide concentrations in hair from alcohol-dependent patients.