Redes alimentarias alternativas en grandes ciudades: los mercados de productores agrarios en Madrid

Directory of Open Access Journals (Sweden)

Ricardo Méndez Gutiérrez del Valle

2017-01-01

Full Text Available Las redes alimentarias alternativas constituyen una temática de investigación emergente en los estudios urbanos, que cuestiona los modelos dominantes de producción, distribución y consumo de alimentos. Una de sus manifestaciones son los mercados de productores, que ponen en contacto directo a productores periurbanos y rurales con consumidores urbanos, favoreciendo las relaciones de proximidad y los circuitos cortos. El artículo investiga los mercados de productores en Madrid mediante una estrategia multimétodo que combina entrevistas, encuestas y otras técnicas complementarias. Los resultados confirman su diversidad interna, identifican las estrategias de los diferentes actores y delimitan su impacto territorial, mostrando también sus limitaciones.

La aristocracia ibérica ante la romanización. Ideología y espacios funerarios en Marroquíes Bajos (Jaén

Directory of Open Access Journals (Sweden)

Serrano Peña, José Luis

2011-12-01

Full Text Available We present the study of the necropolis of a suburban settlement of the Roman city of Aurgi (Jaén. Through the formal and ideological study of these burial grounds, we present a particular situation of endurance of Iberian traditions in the context of Romanization in the Upper Guadalquivir.Presentamos el estudio de las necrópolis de un asentamiento periurbano de la ciudad romana de Aurgi (Jaén, en el que, a través del estudio formal e ideológico de los espacios funerarios, planteamos una situación concreta de perduración de las tradiciones ibéricas en el contexto de la romanización en el Alto Guadalquivir.

DE UN PROTOCOLO DE VALORACIÓN PARA EL PAÍS VASCO

Directory of Open Access Journals (Sweden)

Juan Cruz Alberdi Collantes

2013-01-01

Full Text Available Con demasiada frecuencia, especialmente en los espacios periurbanos, el suelo agrario es ocupado por actividades urbanas. Las explotaciones se reducen progresivamente y el paisaje rural deja paso a una mezcolanza de usos, con una evidente pérdida de calidad. Este proceso rara vez es sometido a estudios de impacto ambiental y la intervención se reduce a una retribución económica al agricultor por el suelo que es ocupado. En este artículo proponemos una metodología que valore el impacto real que la actuación urbanística tiene tanto sobre la explotación como sobre el suelo agrario que se pierde obligando a compensar económica y territorialmente al agricultor.

LOS ESPACIOS PERIURBANOS EN EL ÁREA DE ALICANTE-ELCHE (ESPAÑA

Directory of Open Access Journals (Sweden)

V. Gozálvez Pérez

1993-01-01

Full Text Available Los procesos de periurbanización en Alicante y Elche se iniciaron con los años 1960 y desde entonces han mantenido una expansión continua y acelerada; están basados en la industrialización y el desarrollo terciario locales, sobre los que ha confluido una impor- tante edificación turístico-residencial en la franja costera. Se distinguen tres tipologías de periurbanización según morfologías edificatorias y de usos: 1 turístico-residencial en la franja costera, para propietarios locales y foráneos: 2 con viviendas unifamiliares en los espacios no costeros, para propietarios locales; en su mayor parte esta periurbanización ha ocupado suelos agrícolas arbolados; 3 ejes industriales y terciarios sobre las carrete- ras principales que parten de las ciudades.

Transformaciones socioterritoriales asociadas a proyectos residenciales de condominios en comunas de la periferia del área metropolitana de Santiago

Directory of Open Access Journals (Sweden)

Mario Calderón F.

2005-01-01

Full Text Available Los espacios periurbanos del área metropolitana de Santiago son el escenario de importantes transformaciones sociales, demográficas y territoriales, que se manifiestan en nuevas modalidades de ocupación del territorio rural. En este proceso de expansión de la metrópoli la función residencial es el principal motor de cambio. Tanto las viviendas en parcelas de agrado, individuales o agrupadas en condominio, como las soluciones habitacionales de carácter social, impulsadas por el Estado, contribuyen a dibujar la forma en que los asentamientos humanos se establecen en el territorio. A partir del estudio de las comunas de Pirque, Calera de Tango, Padre Hurtado y Lampa, se efectúa una lectura del nuevo diseño socio espacial que generan dichas agrupaciones residenciales.

Ideas y planteamientos teóricos sobre los territorios periurbanos. Las relaciones campo-ciudad en algunos países de Europa y América

Directory of Open Access Journals (Sweden)

Héctor Ávila Sánchez

2001-03-01

Full Text Available The periurbanization phenomenon has been studied in several countries under various contexts and fallowing different analytical approaches. Nevertheless, common situations and processes become evident. From transformations of the physical space, changes in production or the way in which social actors living and developing in periurban spaces adapt their thinking and day-to-day life, identify their territory and become identified within it. The origin of peri-urbanization relies in developed countries, where the process of counter-urbanization took place, especially In cities of the United States and some European countries. However, at an international level, causes and goals differ: whereas in industrialized countries this phenomenon results from the spatial relocation of productive activities and the improvement of habitat and leisure spaces, in poor countries peri-urban space expresses in a different way: its dynamics is defined by the interrelation of phenomena such as the uncontrolled expansion of urban space, countryside-to-city migrations, illegal land trade and urban poverty, among others.

Mudanças Climáticas e as Formas de Ocupação Urbana: Processo de Criação de Cenários Socioambientais

Directory of Open Access Journals (Sweden)

Laura Machado de Mello Bueno

2012-06-01

Full Text Available Este artigo é fruto de reflexões desenvolvidas a partir de encontros entre pesquisadores vinculados ao PROARQ-FAU/UFRJ, ao Departamento de Geografia da PUC-Rio e ao Mestrado em Urbanismo da PUC Campinas, integrado ao Centro de Ciências Exatas, Ambientais e de Tecnologias – CEATEC. Por meio das pesquisas produzidas isoladamente por estas instituições, buscou-se, após um intenso trabalho de diálogo entre os pesquisadores, elaborar um método para novas investigações. Ele foi construído a partir das argumentações teóricas que levaram o grupo a uma busca pela integração de pesquisas de diferentes áreas e subáreas do conhecimento, concretizando-se em um projeto de pesquisa interinstitucional. Agora inicia-se a realização dessas pesquisas, com apoio da FAPESP e FAPERJ, que terão dois anos de duração. As investigações estão voltadas para espaços urbanos e periurbanos em suas dimensões socioambientais relacionadas a: comportamento de variáveis climáticas nos espaços urbanos consolidados; avaliação da qualidade da cobertura vegetal nas florestas contíguas a áreas urbanizadas; avaliação de intervenções em áreas de alta vulnerabilidade; localização dos investimentos públicos em habitação e infraestrutura em espaços não edificados; dinâmica das águas urbanas e sua relação com o uso e ocupação do solo e legislação urbanística. O artigo discute as bases teóricas e propõe questões metodológicas aplicáveis a estudos comparativos para a realização de cenários futuros visando a adaptação dos espaços urbanos e periurbanos a mudanças climáticas em curso. O intercâmbio entre os pesquisadores permitiu um primeiro avanço tendo como resultado a construção de um método aqui apresentado. O objetivo do artigo é a apresentação da metodologia para ampliação do debate referente às questões teóricas e metodológicas envolvidas.

Sistemas agroflorestais: ressignificação de vivência sem assentamento rural periurbano = Agroforestry systems: giving a new meaning to the peri-urban settlements experiences = Sistemas agroflorestales: resignificación de vivencias en asentamiento rural periurbano

Directory of Open Access Journals (Sweden)

Silva, Ana Paula Soares da

2014-01-01

Full Text Available O trabalho tem como objetivo investigar como assentados rurais da reforma agrária, na implantação de um sistema agroflorestal, vivenciam novas formas de uso dos bens naturais e como esta vivência provoca ressignificação nos sujeitos e na relação destes com a cidade. Os dados foram construídos por uma abordagem qualitativa, que privilegiou observação participante e entrevistas semiestruturadas realizadas com 5 homens e 2 mulheres, em um assentamento localizado em área periurbana de Ribeirão Preto (SP. Os resultados revelam surpresas relativas à alta produtividade, à diminuição do tempo de trabalho e à economia de recursos hídricos e, consequentemente, a emergência de sujeitos esperançosos na produção, com domínio sobre o tempo e protetores da água. O sistema agroflorestal mediou as tensões com a cidade, oferecendo repertórios e identidades positivas para além das vinculações ao movimento social. Dependente de condições externas, a adesão à prática sustentável se evidenciou como processo em construção

Representaciones sociales sobre la problemática de Chagas en un servicio de salud comunitaria del Gran La Plata, Buenos Aires, Argentina.

Science.gov (United States)

Sanmartino, Mariana; Amieva, Carolina; Medone, Y Paula

2017-03-01

Hablar de Chagas es hablar de una problemática compleja, definida por elementos de carácter biomédico, epidemiológico, sociocultural y político, que se conjugan dinámicamente. En este trabajo buscamos identificar y analizar las representaciones sobre Chagas de los integrantes del equipo de salud de un centro de atención periurbano de la ciudad de La Plata, Argentina. Mediante un abordaje cualitativo, se realizaron entrevistas semiestructuradas y se analizaron las respuestas con la técnica del análisis de contenido. Los resultados mostraron que la mayor parte de las personas entrevistadas no contempla al Chagas como una problemática en su contexto laboral cotidiano y manifiestan un fuerte sesgo biologicista en su formación profesional. Con este trabajo señalamos la urgente necesidad de reflexionar críticamente en torno a la formación de los profesionales de la salud en relación a problemáticas socioambientales complejas de importancia regional, como lo es el Chagas.

Puesta en Valor del Patrimonio Agrícola en Ciudades Intermedias, caso Chillán

Directory of Open Access Journals (Sweden)

Marcela Andrea Soto Caro

2016-12-01

Full Text Available Frente al actual escenario territorial, donde la ruralidad persiste en todas sus expresiones identitarias, sociales y económicas, el suelo agrícola pierde extensión, en una pugna constante por sobreponerse a la expansión urbana. Las modificaciones estructurales del espacio periurbano en las últimas décadas nos presentan la consolidación de los procesos de crecimiento y transformación urbana desiguales, que bajo el modelo neoliberal imperante y persistente, se hacen cada vez más visibles en las ciudades de rango intermedio. Si bien no tienen la escala metropolitana, adquieren velocidades de crecimiento urbano aún mayores. El presente estudio compara la evolución de indicadores relacionados con el desarrollo urbano del territorio, para analizar las dinámicas de crecimiento y la pérdida de suelo agrícola. Si bien las ciudades de rango intermedio promueven el consumo de suelo urbano, existe una oportunidad de resaltar el valor patrimonial y productivo del suelo agrícola.

Formación, desarrollo y configuración socio-étnica de una ciudad colonial: Cuenca, siglos XVI-XVIII

Directory of Open Access Journals (Sweden)

Simard, Jacques P.

1997-12-01

Full Text Available Not available.

El artículo aborda el crecimiento físico y la organización social de la ciudad de Cuenca (Audiencia de Quito. Interesándose fundamentalmente en la urbanización de la población indígena, y basándose en los datos de los contratos de compra-venta de tierras, distingue varias áreas de poblamiento: el centro de la ciudad, los suburbios o áreas periurbanas, y las periferias semi-rurales y trata de medir el crecimiento de Cuenca. Plantea tres modelos sucesivos de organización: primero, el intento inicial de la segregación étnica entre españoles e indios; segundo, la jerarquización socio-étnica de los barrios y lugares de residencia urbanos y periurbanos; tercero, el mestizaje y la constitución de barrios “populares”. El trabajo cuenta con cuatro propuestas cartográficas de la ciudad: en 1557, 1600, 1700 y 1780, y con un mapa del valle de Cuenca a fines del siglo XVIII.

Product design - Molecules, devices, functional products, and formulated products

DEFF Research Database (Denmark)

Gani, Rafiqul; Ng, Ka M.

2015-01-01

Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

EL DESARROLLO DE LAS CAPACIDADES LOCALES DE ACCIÓN A PARTIR DE LA IMPLEMENTACIÓN DE ESTRATEGIAS PARTICIPATIVAS. ESTUDIO DE CASO EN EL PRERIURBANO DE BAHIA BLANCA

Directory of Open Access Journals (Sweden)

María Prieto

2008-12-01

Full Text Available Las ciudades son en estos momentos los territorios en los cuales las transformaciones se expresan con una dinámica constante. Los procesos se aceleran, se multiplican los “encuentros”, y la ciudad se expande a través de los espacios periurbanos que cada una genera. Sin embargo, en los trabajos de investigación así como en el ámbito de la gestión municipal, suele ser un tema poco abordado e incluso ignorado. A su vez, es posible cuestionar que en el momento de diagramar la enseñanza de este tipo de conceptos en las aulas universitarias, como así también en los cursos de Postgrado, existe cierta tendencia a la utilización de métodos tradicionales, entre los cuales la exposición y explicación por parte del docente se convierten en las estrategias predominantes. De este modo, se configura un clima social de trabajo ausente de la interacción y cercenando, por lo tanto, la potencialidad de los alumnos en cuanto a sus aportes. Esto limita a los futuros egresados o a los profesionales en ejercicio de su actividad, la adopción de destrezas favorables para la participación en equipos de investigación y /o gestión para los cuales la activa participación y la reflexión crítica constante, se convierten en aptitudes necesarias en el campo laboral. En el presente trabajo se analiza la importancia de incorporar la dinámica de expansión de las ciudades a partir del análisis de los espacios periurbanos. A su vez, se intenta promover el replanteo y discusión del rol de las estrategias metodológicas en el aporte a la formación del pensamiento crítico del alumno-futuro profesional. Particularmente se aborda en esta experiencia los juegos de roles por su potencial formativo y aplicabilidad en las distintas profesiones para el desarrollo, en esta oportunidad, de las capacidades locales de acción. La experiencia tiene lugar con alumnos de un curso de Postgrado en el marco de la asignatura “Enfoques Geográficos sobre Agricultura

Elaboração multidisciplinar e participativa de jogos de papéis: uma experiência de modelagem de acompanhamento em torno da gestão dos mananciais da Região Metropolitana de São Paulo Multidisciplinary elaboration of and participation in role-playing games: an experiment in companion modeling about catchment management in the metropolitan region of São Paulo

Directory of Open Access Journals (Sweden)

Raphaèle Ducrot

2008-01-01

Full Text Available O desenvolvimento de ferramentas de simulação, como os jogos de papéis, pressupõe a integração das várias representações e conhecimentos, o que garante a sua legitimidade e a possibilidade de os utilizar como plataforma de mediação na discussão dos conflitos socioambientais. Este artigo discute a utilização da abordagem de modelagem de acompanhamento no desenvolvimento de dois jogos de papéis sobre a gestão da água e do solo em mananciais periurbanos da Região Metropolitana de São Paulo (RMSP.The development of simulation tools like role-playing games require the integration of some knowledge and several representations which guarantee its legitimacy and the possibility to be used as a mediation platform in collective discussions about environmental conflicts. The paper presents and discusses the use of the companion modeling approach in the development of two role-playing games dealing with water and land management in the periurban catchment of the metropolitan region of São Paulo.

IMPLICACIONES SANITARIAS DEL ESTABLECIMIENTOY EXPANSION EN ESPAÑA DEL MOSQUITO AEDES ALBOPICTUS

Directory of Open Access Journals (Sweden)

Rubén Bueno Marí

2012-01-01

Full Text Available La expansión de Aedes albopictus por el Levante español no ha cesado desde su primigenia detección en nuestro país en el año 2004, habiéndose constatado ya su presencia en las provincias de Girona, Barcelona, Tarragona, Castellón, Alicante y Murcia. La elevada sinantropía de la especie, unida al alto grado de antropofília y extensa capacidad vectorial para transmitir diversas arbovirosis, han propiciado el retorno al sur de Europa de ciclos de transmisión activa de enfermedades frecuentes en el pasado como el Dengue o la aparición de virosis tropicales inéditas hasta entonces como Chikungunya. El presente manuscrito analiza de forma pormenorizada las implicaciones para la salud pública de la previsible expansión de Ae. albopictus por gran parte del territorio peninsular, en el contexto climático y sociodemográfico actual. Adicionalmente, también se discuten diversas cuestiones relativas al control poblacional de la especie en ambientes urbanos y periurbanos, así como los datos preliminares existentes acerca de otros aedinos invasores de reciente hallazgo en el continente europeo.

Modelling Product Families for Product Configuration Systems with Product Variant Master

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

Production of Modularised Product Systems

DEFF Research Database (Denmark)

Jacobsen, Peter

2004-01-01

but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

[Estacionalidad de parásitos intestinales en suelos periurbanos de la ciudad de Neuquén, Patagonia, Argentina].

Science.gov (United States)

Pierangeli, Nora Beatriz; Giayetto, Alejandro Lorenzo; Manacorda, Ana Maria; Barbieri, Liliana Marta; Soriano, Silvia Viviana; Veronesi, Alicia; Pezzani, Betina Cecilia; Minvielle, Marta Cecilia; Basualdo, Juan Angel

2003-03-01

To determine the presence of eggs, larva, cysts and oocysts of intestinal parasites in the soil of a suburb of Neuquén city during 1 year in order to evaluate their seasonal fluctuations in relation to climatic data and soil characteristics in the studied area. A total of 107 soil samples were processed for parasite isolation by sedimentation and flotation methods during the four seasons of the year. Meteorological data were registered and physical, chemical and structural characteristics of the soil were analysed. About 28.9% of the soil samples were positive for at least one parasite form. Six protozoa species (cysts of Entamoeba sp., Enteromonas sp., Endolimax sp., Giardia sp., Iodamoeba sp. and coccidia oocysts) were recovered, but neither larvae nor eggs of human or animal helminths parasites were detected. The percentage of contaminated soil samples and the diversity of species showed a marked decrease in the warm and dry months of the summer. The soil was sandy, without vegetable cover, well drained, and with scarce organic matter content. The frequencies of parasite recovery and the number of species show seasonal fluctuations related to the rainfall. The importance of soil as a risk factor for the transmission of intestinal parasites in the studied area is conditioned by its structural characteristics, which prevent retaining the humidity, and by climatic variables. The interrelation of both factors determines unfavourable conditions that could explain the low level of contamination observed in soil as well as the absence of eggs and helminth larvae.

Impact of product development efforts on product introduction and product customization abilities

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Dawar, Saloni

2014-01-01

This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

Product and labour market regulations, production prices, wages and productivity

NARCIS (Netherlands)

Cette, G.; Lopez, J.; Mairesse, J.

2015-01-01

This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

From Product Models to Product State Models

DEFF Research Database (Denmark)

Larsen, Michael Holm

1999-01-01

A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

Science.gov (United States)

2010-04-01

... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Aproximación a la génesis de la contribución de la densidad en la noción de "ciudad compacta"

Directory of Open Access Journals (Sweden)

José Ramón Navarro Vera

2011-09-01

Full Text Available Como introducción al artículo se traza la génesis del concepto de ciudad compacta a partir de las diferentes variables que lo configuran, explicando cómo éstas se han ido incorporando a esa noción tan extendida en el urbanismo contemporáneo. A continuación se expone un trabajo de investigación desarrollado en el territorio periurbano de Alicante, en el que se relaciona densidad residencial con variables de movilidad. Finalmente, se proponen líneas de investigación que se abren a la luz de la problemática actual de las formas de crecimiento y desarrollo de las ciudades.As an introduction to the article, the conceptual origins of a compact city will be outlined considering the different variables involved. How these variables have been incorporated into such a widespread concept in the field of contemporary urbanism will be explained. Secondly, a research project developed in the outlying urban areas of Alicante which links residential density with variables of mobility will be presented. Finally, new research lines will be proposed to shed light on the current problems posed by the forms of growth and development of cities.

Intenciones de voto a favor de propuestas verdes. ¿Nuevo paradigma ambiental y postmaterialismo social?

Directory of Open Access Journals (Sweden)

Javier Carreón Guillén

2013-01-01

Full Text Available Las decisiones de voto en tanto indicadoras de las relaciones entre Estado y ciudadanía marcan la pauta en materia de protección, satisfacción, confort y evaluación de gobierno frente al desarrollo humano y sustentable. En tal sentido, la proximidad de los comicios es un escenario idóneo para observar el ambientalismo y el posmaterialismo como fenó-menos sociopolíticos. Precisamente, el objetivo del presente estudio fue establecer la emergencia de creencias, valores, percepciones, actitudes e intenciones en torno a la conservación de los recursos naturales que se gestan desde partidos y candidaturas ecologistas. Empero, los resultados advierten la incidencia de factores económicos, políticos y sociales que afectan la relación entre ciudadanía y gobernantes en cuanto a estilos de vida relativos a la gobernanza de los recursos energéticos e hídricos en una muestra de 135 estudiantes periurbanos. Tales cuestiones servirán para el diseño de políticas públicas en materia de optimización de presupuestos mediante el uso eficiente de los recursos y servicios municipales como temas centrales en la agenda pública.

Method for alignment of product and production concepts

DEFF Research Database (Denmark)

Pedersen, Rasmus; Kvist, Morten; Mortensen, Niels Henrik

2005-01-01

The right use of modular product architectures can help companies provide a great variety of customized products at a competitive price level, by reuse of knowledge, components, processes and utilization of economies of scale in many of the activities that are necessary to provide products...... for customers. Modular product architectures often serve as a basis for several products often referred to as product families. One or more product families may constitute a substantial amount of the total product portfolio of a company, and it is, therefore, of the greatest importance that concepts...... and solutions are evaluated thoroughly throughout the design phases because any design fault is likely to propagate to a large part of the business. Developing modular product architectures is therefore also the task of ensuring a fit between the products that can be made on the basis of the architecture...

Product Structure, the Heart of Product Definition

Science.gov (United States)

DeHoog, C., Jr.

1999-01-01

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

Product-Marketing Innovation, Skills, and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

2016-01-01

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is hypothesized that product and marketing innovation are complementary inputs and that innovation activities are skill-intensive. It is established...... that product and marketing innovation in skill-intensive firms results in significantly faster productivity growth. Moreover, product and marketing innovation have independent roles in productivity growth, which cannot be attributed to organizational changes. Finally, we apply an instrument variable approach...... for firms, innovation choices to study endogeneity. The results strongly support the idea that product–marketing innovation leads to faster productivity growth in skill-intensive firms....

Product-Marketing Innovation, Skills and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is argued that marketing and product innovation are complementary inputs and that innovation activities are skill-intensive. It is found that product...... and marketing innovation in skill-intensive firms results in significantly faster productivity growth than in unskilled-intensive firms that introduce this combination of innovation activities. More precisely, an increase in the share of educated workers of one percentage point, increases productivity growth...... by around 0.1 percentage point in firms with product and marketing innovation. In addition, it is found that firms that engage in product innovation but not in marketing innovation or the other way around do not demonstrate a growth effect from their innovation activities. It is also found that product...

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

Sustainable Multi-Product Seafood Production Planning Under Uncertainty

International Nuclear Information System (INIS)

Simanjuntak, Ruth; Mawengkang, Herman; Sembiring, Monalisa; Sinaga, Rani; Pakpahan, Endang J

2013-01-01

A multi-product fish production planning produces simultaneously multi fish products from several classes of raw resources. The goal in sustainable production planning is to meet customer demand over a fixed time horizon divided into planning periods by optimizing the tradeoff between economic objectives such as production cost, waste processed cost, and customer satisfaction level. The major decisions are production and inventory levels for each product and the number of workforce in each planning period. In this paper we consider the management of small scale traditional business at North Sumatera Province which performs processing fish into several local seafood products. The inherent uncertainty of data (e.g. demand, fish availability), together with the sequential evolution of data over time leads the sustainable production planning problem to a nonlinear mixed-integer stochastic programming model. We use scenario generation based approach and feasible neighborhood search for solving the model.

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Caracterización de la miel de Meliponas en ecosistemas periurbanos y agrícolas del Consejo Popular Horquita

Directory of Open Access Journals (Sweden)

Ing. Nelvis Fernández García

2018-04-01

Full Text Available El estudio se realizó en cuatro ecosistemas del Consejo Popular “Horquita”, municipio Abreus, provincia Cienfuegos. Se caracterizaron desde el punto de vista microbiológico las mieles de colmenas de Abejas Meliponas. Mediante un diseño completamente aleatorizado para cada ecosistema se tomaron de cinco colmenas muestras de miel (250 ml, todas ellas de cajas, modalidad Nogueira-Neto, 1997. Las muestras fueron enviadas al Centro Provincial de Higiene y Epidemiología de la provincia Santa Clara donde fueron analizadas. En todos los ecosistemas existió integración agricultura-ganadería o crianza de traspatio, y en algunos casos aguas residuales dentro del rango de vuelo de las abejas. Las mieles analizadas cumplieron con las exigencias internacionales presentando, en todos los casos, características microbiológicas óptimas para su consumo y comercialización. Se propone como parámetros microbiológicos para la miel en el territorio menos de 10 UFC/g, tanto para microorganismos a 30oC (bacterias, hongos y levaduras como para coliformes totales. Palabras clave: Ecosistemas, miel, bacterias, hongos, levaduras.

Framework for product knowledge and product related knowledge which supports product modelling for mass customization

DEFF Research Database (Denmark)

Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

2003-01-01

on experience from product modelling projects in several companies. Among them for example companies manufacturing electronic switchboards, spray dryer systems and air conditioning equipment. The framework is divided into three views: the product knowledge view, the life phase system view and the transformation...... and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

PIGS BREEDING FOR THE PRODUCTION OF TRADITIONAL MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Đuro Senčić

2014-06-01

Full Text Available The fertile Slavonia is known for production of several types of cured meats: kulen, kulen sis, sausage, ham and bacon, and other pork products (“krvavica” - blood sausage, “švargl” - a type of brawn where chopped parts of head are stuffed inside the pig’s stomach, “čvarci” - a variant of pork crisps, fat. These products require “mature pigs” of adequate slaughter quality. Production of pigs intended for traditional meat products may take place in different production systems (open, closed, semi-open, “organic”. Each of these systems provides a specific quality of pigs for slaughter, reflecting on the quality of the final product. Production systems can have a significant impact on growth performance and carcass and meat quality of pigs. This effect arises from the interaction between housing conditions, the amount and composition of food and used pig genotype. The choice of a production system depends on local production conditions, pig genotype, consumer demand (market for a given product quality, and other factors. Due to their quality, the traditional Slavonian meat products can become a recognizable Croatian brand in both domestic and international markets. Production of standard quality products requires standard quality of pigs. Therefore this book is focused on such pigs production.

78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2013-04-03

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2012-04-11

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

A model for optimizing the production of pharmaceutical products

Directory of Open Access Journals (Sweden)

Nevena Gospodinova

2017-05-01

Full Text Available The problem associated with the optimal production planning is especially relevant in modern industrial enterprises. The most commonly used optimality criteria in this context are: maximizing the total profit; minimizing the cost per unit of production; maximizing the capacity utilization; minimizing the total production costs. This article aims to explore the possibility for optimizing the production of pharmaceutical products through the construction of a mathematical model that can be viewed in two ways – as a single-product model and a multi-product model. As an optimality criterion it is set the minimization of the cost per unit of production for a given planning period. The author proposes an analytical method for solving the nonlinear optimization problem. An optimal production plan of Tylosin tartrate is found using the single-product model.

"Product on Stopper" in a Lyophilized Drug Product: Cosmetic Defect or a Product Quality Concern?

Science.gov (United States)

Mehta, Shyam B; Roy, Shouvik; Yang, Han-Chang Cathy

2018-06-01

During manufacturing of a lyophilized drug product, operator errors in product handling during loading of product filled vials onto the lyophilizer can lead to a seemingly cosmetic defect which can impact certain critical quality attributes of finished product. In this study, filling of a formulated monoclonal antibody in vials was performed using a peristaltic pump filling unit, and subsequently, the product was lyophilized. After lyophilization, upon visual inspection, around 40% of vials had cosmetic defect with residual product around stopper of the vial and were categorized as "product on stopper" vials, whereas remaining 60% vials with no cosmetic defect were called "acceptable vials." Both groups of vials from 1 single batch were tested for critical quality attributes including protein concentration (ultraviolet absorbance at 280), residual moisture (Karl Fischer), sterility (membrane filtration), and container closure integrity (CCI) (blue dye ingress). Analysis of protein quality attributes such as aggregation, protein concentration, residual moisture showed no significant difference between vials with "product on stopper" and "acceptable vials." However, CCI of the "product on stopper" vials was compromised due to the presence of product around stopper of the vial. The results from this case study demonstrate the following 2 important findings: (1) that a seemingly cosmetic defect may impact product quality, compromising the integrity of the product and (2) that CCI test method can be used as an orthogonal method to sterility testing to evaluate sterility assurance of the product. The corrective action proposed to mitigate this defect is use of a larger sized vial that can potentially minimize this defect that arises because of product handling errors. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Bioethanol production potential from Brazilian biodiesel co-products

Energy Technology Data Exchange (ETDEWEB)

Visser, Evan Michael; Filho, Delly Oliveira; Martins, Marcio Aredes [Departamento de Engenharia Agricola, Universidade Federal de Vicosa, Campus Universitario 36570-000 Vicosa, MG (Brazil); Steward, Brian L. [Department of Agricultural and Biosystems Engineering, Iowa State University, 214D Davidson Hall, Ames, IA 50011 (United States)

2011-01-15

One major problem facing the commercial production of cellulosic ethanol is the challenge of economically harvesting and transporting sufficient amounts of biomass as a feedstock at biorefinery plant scales. Oil extraction for biodiesel production, however, yields large quantities of biomass co-products rich in cellulose, sugar and starch, which in many cases may be sufficient to produce enough ethanol to meet the alcohol demands of the transesterification process. Soybean, castor bean, Jatropha curcas, palm kernel, sunflower and cottonseed were studied to determine ethanol production potential from cellulose found in the oil extraction co-products and also their capacity to meet transesterification alcohol demands. All crops studied were capable of producing enough ethanol for biodiesel production and, in the case of cottonseed, 470% of the transesterification demand could be met with cellulosic ethanol production from oil extraction co-products. Based on Brazilian yields of the crops studied, palm biomass has the highest potential ethanol yield of 108 m{sup 3} km{sup -2} followed by J. curcas with 40 m{sup 3} km{sup -2}. A total of 3.5 hm{sup 3} could be produced from Brazilian soybean oil extraction co-products. (author)

Tobacco Products Production and Operations Reports

Data.gov (United States)

Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

A product feature-based user-centric product search model

OpenAIRE

Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

2016-01-01

During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

75 FR 18015 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

Science.gov (United States)

2010-04-08

..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... coal production, and Indian coal production under section 45. FOR FURTHER INFORMATION CONTACT: Philip... Coal, and Indian Coal:'', Line 26, the language ``is 2.15 cents per kilowatt hour on the'' is corrected...

PDT (Product Data Technology), Production and Society

DEFF Research Database (Denmark)

Vesterager, Johan

1997-01-01

Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

Productivity

DEFF Research Database (Denmark)

Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

Utilization of Biodiesel By-Products for Biogas Production

Science.gov (United States)

Kolesárová, Nina; Hutňan, Miroslav; Bodík, Igor; Špalková, Viera

2011-01-01

This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered. PMID:21403868

Products and environment. Report on integrated product policy

International Nuclear Information System (INIS)

2001-01-01

The National Commission for Sustainable Development established on 16 November 1999 a subgroup which had as one of its tasks to formulate a national strategy or a strategic view on how Finland should promote integrated product policy in accordance with the requirements of sustainable development. The aim of integrated product policy is to improve the environmental friendliness of products and product systems by taking into account the environmental effects during their entire lifecycles. Its leading principles are lifecycle thinking, market-basedness, integration of environmental aspects into economic activity, and that all actors within the product chain (consumers, trade, companies) decrease the environmental consequences of their activities according to the principle of shared responsibility and to their preconditions. Political decision-making and administration should provide firms and clients with the required preconditions and i.a. remove obstacles to knowledge and promote research. In product policy, emphasis is on especially those instruments that encourage actors to develop their activities. At national level, economic instruments should be directed to domestic demand and use of products. It is often most appropriate to develop economic instruments for production and legislation and other regulation within international co-operation. (orig.)

Making Online Products More Tangible: The Effect of Product Presentation Formats on Product Evaluations.

Science.gov (United States)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-07-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that relates different online product presentation formats to the three-dimensional concept of product tangibility. We test how the three tangibility dimensions influence perceived diagnosticity and, eventually, online purchase intentions. A between-subjects lab experiment (n = 366) was used to test the hypothesized effects of three common online product presentation formats (pictures vs. 360 spin rotation vs. virtual mirror). The results showed that out of these formats, virtual mirrors were superior in providing a sense of product tangibility, followed by the 360-spin rotation format and static pictures. Furthermore, in terms of predictive validity, two of the three tangibility dimensions significantly increased perceived diagnosticity, which, in turn, positively and strongly affected purchase intentions. Overall, our results add to previous works studying the relationships between online product presentation formats and consumer decision making. Also, they hold value for online practitioners by highlighting the potential benefits of applying technologically advanced product presentation formats such as the virtual mirror.

Advances in product family and product platform design methods & applications

CERN Document Server

Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

2014-01-01

Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

Managing complexity of product mix and production flow in configure-to-order production systems

DEFF Research Database (Denmark)

Myrodia, Anna; Bonev, Martin; Hvam, Lars

2014-01-01

In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components, or...

Production of GMP certified herbal products in Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Daryl Jesus Arapoc; Bohari Yaacob; Zainah Adam

2015-01-01

This paper will discuss on up scaling production of herbal product. A pilot scale production plant were developed in Block 37 and equipped with automated and semi-automated production machines which have the capacity to produce 100 thousand pieces of tablet per hour. In order to ensure the quality of the products, raw material inspections, IPQC and FPQC will be done on each batch. Besides that, certification of GMP will be done concurrently. One of the products that will be launch soon is the Mas Cotek tablet. This product is the result of numerous years of researches that had been done in BTP. This includes formulation and production of the product itself. It is hope that more herbal products can be produce in near future. (author)

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Productivity growth patterns in US dairy products manufacturing plants

NARCIS (Netherlands)

Geylani, P.C.; Stefanou, S.E.

2011-01-01

We analyse the productivity growth patterns in the US dairy products industry using the Census Bureau's plant-level data set. We decompose Total Factor Productivity (TFP) growth into the scale and technical change components and analyse variability of plants' productivity by constructing transition

Micro Products - Product Development and Design

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

Production management (1976)

International Nuclear Information System (INIS)

Lee, Sun Ryong

1976-03-01

This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

Product Customization

DEFF Research Database (Denmark)

Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

The Deployment of Product-Related Environmental Legislation into Product Requirements

Directory of Open Access Journals (Sweden)

Daniela C. A. Pigosso

2016-04-01

Full Text Available Environmental legislation is increasingly changing its focus from manufacturing-oriented to product-oriented instruments. Compliance with product-related environmental legislation is achieved by the incorporation of environmental requirements into the early phases of the product development process (PDP. Nevertheless, the deployment of product-related environmental legislation into product requirements is still a challenge. This study followed an inductive approach to propose a guideline to support the identification, analysis and deployment of product requirements based on product-related environmental legislation. The guideline is composed of nine steps, clustered into three groups according to their main objective: (A identification of environmental product-related legislation; (B identification of legislative topics to be considered for the deployment of requirements; and (C creation and validation of product requirements. The product requirements deployed are to be considered during the PDP. The guideline was evaluated in an expert consultation in a large manufacturing company, suggesting that it can be used to support the systematization and deployment of product-related environmental requirements.

Utilization of Biodiesel By-Products for Biogas Production

Directory of Open Access Journals (Sweden)

Nina Kolesárová

2011-01-01

Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

Product numerical range in a space with tensor product structure

OpenAIRE

Puchała, Zbigniew; Gawron, Piotr; Miszczak, Jarosław Adam; Skowronek, Łukasz; Choi, Man-Duen; Życzkowski, Karol

2010-01-01

We study operators acting on a tensor product Hilbert space and investigate their product numerical range, product numerical radius and separable numerical range. Concrete bounds for the product numerical range for Hermitian operators are derived. Product numerical range of a non-Hermitian operator forms a subset of the standard numerical range containing the barycenter of the spectrum. While the latter set is convex, the product range needs not to be convex nor simply connected. The product ...

Framework for developing product strategy for Configure-To-Order products

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

Companies producing customized products tend to increase the variety of their product portfolio, in order to fulfill the demand of their customers and align with the competitors. Nevertheless the profitability of the product families may vary greatly. The purpose of this paper is to analyze...... profitability of Configure-To-Order (CTO) products. The framework consists of a 4-step model: Analysis of product assortment, Profitability analysis on configured products, Market and Competitors analysis, Scenarios for future product assortment. The suggested framework is tested on a company. The results...... in terms of product delimitation and experiences gained from the case study are further discussed....

Product samples stimulate choice of unfamiliar healthful food products.

Science.gov (United States)

Schickenberg, B; van Assema, P; Brug, J; de Vries, N K

2011-08-01

The purpose of this study was to assess whether the availability of a product sample of an unfamiliar low-fat or fruit and vegetable products stimulates choice for this product among food neophobic young adults. The study had a 2 (experimental vs. control group) by 4 (low-fat bread spread, low-fat cheese, fruit juice, fruit and vegetable juice) between subjects design with a pre-and post-experiment questionnaire. The study was conducted in restaurant rooms of several educational institutions in the Netherlands among a convenience sample of 197 food neophobic young adults aged 17-25 years. A small bite or sip-sized sample of the target product was provided as an intervention. The effect measure was choice of either an unfamiliar healthful food product or a traditional food product. Offering a sample of an unfamiliar healthful food product resulted in 51% of the participants in the experimental group choosing this product vs. 36.4% in the control group. Providing food product samples seems to be a promising strategy in healthy diet promotion programs for food neophobic young adults to increase first-time trial of unfamiliar low-fat and fruit and vegetable products. Copyright © 2011 Elsevier Ltd. All rights reserved.

KLE Translog production function and total factor productivity

Czech Academy of Sciences Publication Activity Database

Klacek, J.; Vošvrda, Miloslav; Schlosser, Š.

2007-01-01

Roč. 87, č. 4 (2007), s. 261-274 ISSN 0322-788X Institutional research plan: CEZ:AV0Z10750506 Keywords : total factor productivity * translog production function * aggregate production function * least squares method * ridge regression Subject RIV: AH - Economics

Clean production and design of products - Complex system and environmental politics of products

International Nuclear Information System (INIS)

Sanchez, M.

1999-01-01

The orientation of the environmental problem in sustainable terms, especially in the industrialized economies, a new profile in the last years has found. In these economies, the search of a clean production franked by a coherent politics of products and the contribution of the design of products, it have given to the environmental speech a new dimension. With the present text it is sought to respond to the necessity of exploring in Colombia this topic that has a decisive paper inside the instruments of protection of the environment cooperating to improve the quality of life in other latitudes. At the moment the theoretical foundations around the development of products play a important role in the different lines of applied investigation carried out by these countries, especially in the mark of a politics of sustainable development. In spite of the importance of this factor in the industrialized countries where the capacity of integration of a coordinated administration is of great meaning, in Colombia, particularly, the relationship between development and design of products with industry, investigation and political of development and, for our case with a clean production, it is characterized by the scarce insert and attention of this discipline

RPC Production at General Tecnica: a mass scale production

International Nuclear Information System (INIS)

Della Volpe, D.; Morganti, S.

2006-01-01

The construction of LHC has deeply changed the RPC production. The enormous amount of detector needed and the strong requirements on gas volume quality had a deep impact on the production chain and on the QC and QA at the production site. This basically has brought the RPC from an almost hand-crafted detector to a medium scale mass product. The most critical aspects of the production chain have been modified and/or improved introducing new and more rigorous QC and QA procedures to guarantee the detector quality and improve the management of storage and the procurement on materials. Here it will be presented the work carried on in the last four year at the production site to improve and check the quality and the results achieved. Something like 10000 RPC were produced between 2002 and 2005. Also a preliminary and rough analysis on the efficiencies of the various phases in the chain production based on ATLAS production will be presented

Flour production from shrimp by-products and sensory evaluation of flour-based products

Directory of Open Access Journals (Sweden)

Thiago Mendes Fernandes

2013-08-01

Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

Swine production.

Science.gov (United States)

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

Treatment of coaly substances. [production of soluble products

Energy Technology Data Exchange (ETDEWEB)

Janner, J; Gonre, O

1928-05-01

A process is described for the production of soluble products from coaly substances. The process consists of heating coal or the like under pressure, and if desired with the addition of gases or vapors which do not react to a substantial extent with the coaly matter under the conditions of working. The product may be treated with a solvent at an elevated temperature and under pressure, with or without the addition of said gases or vapors. The products obtained by the above process may be subjected to a further treatment, in particular a cracking process and/or a destructive hydrogenation. The products may also be separated by the aid of suitable solvents into resins, waxes, and other substances.

Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

Science.gov (United States)

General Accounting Office, Washington, DC.

Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

Product Service Systems

DEFF Research Database (Denmark)

Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

An Intelligent Method of Product Scheme Design Based on Product Gene

Directory of Open Access Journals (Sweden)

Qing Song Ai

2013-01-01

Full Text Available Nowadays, in order to have some featured products, many customers tend to buy customized products instead of buying common ones in supermarket. The manufacturing enterprises, with the purpose of improving their competitiveness, are focusing on providing customized products with high quality and low cost as well. At present, how to produce customized products rapidly and cheaply has been the key challenge to manufacturing enterprises. In this paper, an intelligent modeling approach applied to supporting the modeling of customized products is proposed, which may improve the efficiency during the product design process. Specifically, the product gene (PG method, which is an analogy of biological evolution in engineering area, is employed to model products in a new way. Based on product gene, we focus on the intelligent modeling method to generate product schemes rapidly and automatically. The process of our research includes three steps: (1 develop a product gene model for customized products; (2 find the obtainment and storage method for product gene; and (3 propose a specific genetic algorithm used for calculating the solution of customized product and generating new product schemes. Finally, a case study is applied to test the usefulness of our study.

Protein-carbohydrate supplements in the production of meat products

Directory of Open Access Journals (Sweden)

I. N. Tolpigina

2013-01-01

Full Text Available Rationality of the use of protein-carbohydrate additive in the technology of meat products was justified. The capability of the fiber to stabilizate properties of meat systems was investigated. There was established permissible limits of the use of additives in prescription solutions in the production of sausage products of a various price level according to the criterion of biological values. The trial production of sausage products was held. By the methods of mathematical statistics were optimized compositions of protein-polysaccharide additives.

Reconfiguración del territorio y política territorial: Dispersión y baja densidad en las áreas de crecimiento reciente de la ciudad de Tandil, provincia de Buenos Aires

Directory of Open Access Journals (Sweden)

Licia Ríos

2014-06-01

Full Text Available En el marco del fenómeno de urbanización creciente, se verifican cambios en la configuración territorial que dan cuenta de la emergencia de procesos de expansión urbana dispersos en coexistencia con las tradicionales formas de gradiente por periferización del modelo de ciudad compacta. Tanto en la reestructuración territorial de las áreas metropolitanas como de las ciudades de menor rango, se manifiestan cambios específicos caracterizados por dinámicas demográficas y económicas intensas, en correspondencia con significativas transformaciones de los entornos periurbanos y rurales. El estudio del crecimiento urbano en la ciudad de Tandil busca explicar las relaciones entre las reconfiguraciones ocurridas en las áreas de crecimiento urbano reciente, y la planificación y gestión territorial. La tesis que subyace es que la política territorial favoreció las tendencias de expansión urbana dispersas y de baja densidad, en articulación con las dinámicas del mercado de suelos rururbanos y nuevas demandas socioculturales. La política territorial ha tenido una alta capacidad de incidencia en la configuración del territorio a partir del reconocimiento de nuevas tendencias, fundamentalmente las asociadas al crecimiento extensivo, disperso y de baja densidad, porque sus acciones y decisiones validan los nuevos modelos.

Tobacco Products

Science.gov (United States)

... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

Financiamiento y comercialización de la agricultura familiar en el Gran La Plata. Estudio en el marco de un proyecto de Desarrollo Territorial Financing and commercialization of family farming in Gran La Plata. Study as part of a Territorial Development project

Directory of Open Access Journals (Sweden)

Ramón I. Cieza

2012-01-01

Full Text Available Currently, family farming has taken visibility both in academic works and in the design of public policies. Even though are recognized own characteristics which differentiate it from the business production, they are presented according to the type of production and the territory where they are inserted, particularities that allow defining and analyzing them. In the case of family horticultural and flower production, which supplies with fresh products to big urban centers, the specificity of labor-intensive production system, the technologies utilized, the characteristics of the obtained products, their commercialization and their localization, differs substantially from others productive systems of the country. According to diagnosis made by INTA [2004] and other qualitative works in suburbs of Buenos Aires, the difficulties faced by these households are multiples. Among the most important are mentioned the subordination in the commercial chain and the access to financing. This paper seeks account for a territorial development project in the peri-urban region of Gran La Plata, which addresses from an integral perspective, to financing aspects and commercialization to family farmers It focuses on 30 family farmers from La Plata and Berazategui belonging to the project "Banco Social", implemented by Facultad de Ciencias Agrarias y Forestales from UNLP; advancing on an analysis regarding the access to financing and the commercial strategies carried out by the family farmers under studyEn la actualidad, la agricultura familiar ha tomado visibilidad tanto en trabajos académicos como en el diseño de políticas públicas. Si bien se reconocen características propias que la diferencian de la producción empresarial, se presentan de acuerdo al tipo de producción y el territorio donde se inserta, particularidades que permiten definirlas y analizarlas. En el caso de la producción hortiflorícola familiar que abastece de productos frescos a los

Designing Product Families

DEFF Research Database (Denmark)

Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

1998-01-01

Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

RECUPERACIÓN DE ESPACIOS URBANOS Y PERIURBANOS MEDIANTE LA IMPLEMENTACIÓN DE PARQUES-HUERTAS EN LA CIUDAD DE BAHIA BLANCA

OpenAIRE

Jezabel Franza; María Kraser; Daniel Paoloni; Silvina Raitzin; Gabriel Reiter

2008-01-01

Las ciudades crecen y generan espacios con profundos desequilibrios. Desde la acción pública existen diferentes formas de abordar esta complejidad. Una de las alternativas que en distintos espacios del territorio nacional se han desarrollado como medio de recuperación de espacios y a su vez opción de ingresos económicos para los grupos poblacionales que sufren carencias ha sido la implementación de Parques-Huerta en la experiencia rosarina. Puede decirse que esta experiencia se enmarca en...

RECUPERACIÓN DE ESPACIOS URBANOS Y PERIURBANOS MEDIANTE LA IMPLEMENTACIÓN DE PARQUES-HUERTAS EN LA CIUDAD DE BAHIA BLANCA

Directory of Open Access Journals (Sweden)

Jezabel Franza

2008-12-01

Full Text Available Las ciudades crecen y generan espacios con profundos desequilibrios. Desde la acción pública existen diferentes formas de abordar esta complejidad. Una de las alternativas que en distintos espacios del territorio nacional se han desarrollado como medio de recuperación de espacios y a su vez opción de ingresos económicos para los grupos poblacionales que sufren carencias ha sido la implementación de Parques-Huerta en la experiencia rosarina. Puede decirse que esta experiencia se enmarca en el concepto de una gestión ambiental ya que agrupa a un conjunto de acciones de manejo para la solución de problemas ambientales, procura básicamente la mejora endógena de los problemas o bien obtener estados óptimos, e instrumenta diversas formas participativas para la búsqueda de soluciones endógenas. Los Parques-Huerta fueron pensados como espacios públicos multifuncionales gestionados en forma participativa entre el Estado y la sociedad civil, configurándose como bandas de segunda naturaleza diseñadas y creadas por los grupos humanos utilizando técnicas de cultivos ecológicas. Son espacios de producción grupal en torno a las propuestas territoriales y locales que contribuyen al desarrollo local así como también a la planificación estratégica por zonas, barrios y/o región. En relación con el medio ambiente, la iniciativa implica algunas contribuciones como mejorar las condiciones sanitarias del área y fortalecer la biodiversidad ya que se pueden producir especies autóctonas de valor local. Por otra parte, se vincula a un manejo sustentable de los recursos naturales, particularmente en lo que respecta a manejo del suelo y del agua. Brinda además la posibilidad de producir alimentos de alto valor ecológico, es decir libres de agrotóxicos. Por último, podríamos mencionar que la propuesta valoriza los servicios ambientales y finalmente ayuda a generar vínculos entre la tierra y las personas que la trabajan, debido a que desarrolla un sentimiento distintivo de territorialidad. El objetivo de la presente comunicación es brindar los fundamentos y bases para la implementación de este tipo de espacios de agricultura urbana y periurbana en la ciudad de Bahía Blanca. Esta clase de proyectos puede ser entendido como una posibilidad de progreso en la gestión ambiental urbana para ciudades como la mencionada donde existe una escasa política en relación con los espacios ociosos y la única respuesta, en el mejor de los casos, es transformar estas tierras en espacios de circulación peatonal. La metodología se sustenta en la recopilación, análisis e interpretación de material bibliográfico y testimonios de informantes claves mediante el empleo de técnicas cualitativas propias de la Geografía Humana. Para ello se emplea como base del análisis la experiencia de la ciudad de Rosario, la cual es pionera en esta modalidad de recuperación de espacios y se incluye en un proyecto integral de desarrollo urbano singular. Creemos conveniente mencionar que el presente trabajo surge como instancia evaluadora final de la Cátedra Curso de Desarrollo Ambiental Urbano dictado por la Dra. María Amalia Lorda, correspondiente a los Ciclos de Orientación Organización y Ordenamiento del Espacio Urbano y Regional y Gestión de los Recursos Naturales y Medio Ambiente del quinto año de la Licenciatura en Geografía del Departamento de Geografía y Turismo de la Universidad Nacional del Sur. Asimismo el escrito es una inquietud grupal que propone recuperar espacios urbanos degradados mediante la iniciativa de agricultura urbana a través de la implementación de parques-huerta.

Transformaciones agrícolas en el contexto periurbano de la ciudad de San Cristóbal de Las Casas, Chiapas

Directory of Open Access Journals (Sweden)

Araceli Calderón Cisneros

2014-01-01

Full Text Available San Cristóbal de Las Casas ha crecido en las últimas décadas abarcando las zonas rurales circundantes. El objetivo del presente trabajo consistió en identificar las transformaciones que la interacción urbano-rural imprime sobre la actividad agrícola de un área periurbana: el cerro Huitepec. Se revisó información documental y se levantaron 100 entrevistas abiertas y estructuradas entre población de las localidades rurales e informantes clave. Aunque ha perdido relevancia como fuente de ingresos económicos familiares, la agricultura y la cría de animales de traspatio aún tienen un papel significativo para el autoconsumo familiar.

Product Family Assessment

DEFF Research Database (Denmark)

Kvist, Morten

their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

Product (RED)

DEFF Research Database (Denmark)

Ponte, Stefano

2011-01-01

) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

Production management (2000)

International Nuclear Information System (INIS)

Jung, Chung Yeong

2000-08-01

This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS

Energy Technology Data Exchange (ETDEWEB)

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be

Productivity improvement with green approach to palm oil factory productivity

Science.gov (United States)

Matondang, N.

2018-02-01

The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

The use of sanitation products in milk and cheese production

Directory of Open Access Journals (Sweden)

Samir Kalit

2001-06-01

Full Text Available Considering hygienic conditions in cheese production the aim of thispaper was to investigate the influence of using some sanitation* products in milk and cheese production on family farms. This investigation was a part of the project “Improving the quality of Tounj cheese produced on family farms”. By use of the sanitation products, during milk production, significant (P<0.01 decrease of geometrical mean of total bacterial count from 3.54 x 105 to 8 x 103 in mL of milk, as well as significant (P<0.01 decrease of geometric mean of somatic cell count from 3.1 x 105 to 2.4 x 105 in mL of milk was observed. The ratio of hygienically unacceptable cheeses, according to the Regulations of microbial standards for foods (NN 46/94., significantly (P<0.01 decreased as well. Because of the new requests and standards, the sanitation products are more in use in both milk and cheese production on family farms. Investigated sanitation products were suitable for use in milk and Tounj cheese production.

Emulsified Water Products

Directory of Open Access Journals (Sweden)

Elif Tuğçe AKSUN

2016-12-01

Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

Designer-made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

2001-01-01

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Designer made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Green product development : What does the country product space imply?

NARCIS (Netherlands)

Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

Proactive Modeling of Market, Product and Production Architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

2011-01-01

This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

Estimating product-to-product variations in metal forming using force measurements

Science.gov (United States)

Havinga, Jos; van den Boogaard, Ton

2017-10-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final quality of each product. We propose to predict part of the product-to-product variations in multi-stage forming processes based on force measurements from previous process stages. The reasoning is that final product properties as well as process forces are expected to be correlated since they are both affected by material and process variation. In this study, an approach to construct a moving window process model based on historical data from the process is presented. These regression models can be built and updated in real-time during production. The approach is tested with data from a demonstrator process with cutting, deep drawing and bending stages. It is shown that part of the product-to-product variations in the process can be predicted with the developed process model.

Biocidal Products and Borderline Products

OpenAIRE

Yılmaz, Abdullah

2015-01-01

Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

Product quality of parenteral vancomycin products in the United States.

Science.gov (United States)

Nambiar, S; Madurawe, R D; Zuk, S M; Khan, S R; Ellison, C D; Faustino, P J; Mans, D J; Trehy, M L; Hadwiger, M E; Boyne, M T; Biswas, K; Cox, E M

2012-06-01

In response to concerns raised about the quality of parenteral vancomycin products, the U.S. Food and Drug Administration (FDA) is investigating the product quality of all FDA-approved parenteral vancomycin products available in the United States. Product quality was evaluated independently at two FDA Office of Testing and Research (FDA-OTR) sites. In the next phase of the investigation, being done in collaboration with the National Institute of Allergy and Infectious Diseases, the in vivo activity of these products will be evaluated in an appropriate animal model. This paper summarizes results of the FDA investigation completed thus far. One site used a validated ultrahigh-pressure liquid chromatography method (OTR-UPLC), and the second site used the high-performance liquid chromatography (HPLC) method for related substances provided in the British Pharmacopeia (BP) monograph for vancomycin intravenous infusion. Similar results were obtained by the two FDA-OTR laboratories using two different analytical methods. The products tested had 90 to 95% vancomycin B (active component of vancomycin) by the BP-HPLC method and 89 to 94% vancomycin by OTR-UPLC methods. Total impurities were 5 to 10% by BP-HPLC and 6 to 11% by OTR-UPLC methods. No single impurity was >2.0%, and the CDP-1 level was ≤ 2.0% across all products. Some variability in impurity profiles of the various products was observed. No adverse product quality issues were identified with the six U.S. vancomycin parenteral products. The quality parameters of all parenteral vancomycin products tested surpassed the United States Pharmacopeia acceptance criteria. Additional testing will characterize in vivo performance characteristics of these products.

SaferProducts API

Data.gov (United States)

US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

Innovation in Product Development

DEFF Research Database (Denmark)

McAloone, Tim C.; Restrepo-Giraldo, John Dairo

2005-01-01

The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Product Stigmaticity : Understanding, Measuring and Managing Product-Related Stigma

NARCIS (Netherlands)

Vaes, K.

2014-01-01

Stigma-free Product Design. Many of the products intended to relieve us from discomforting or unsafe situations and many medical and assistive devices are experienced as unpleasant and uncomfortable. On top of their discomfort, product users may also experience social unease from the people around

Optimizing the order processing of customized products using product configuration

DEFF Research Database (Denmark)

Hvam, Lars; Bonev, Martin; Denkena, B.

2011-01-01

. Product configuration based on integrated modular product structure and product family architecture has been recognized as an effective means for implementing mass customization. In order to evaluate the effects of product configuration on order processing, a study has been conducted by the Department...... and its benefits for the order processing have been evaluated....

Fickle product mix: Exporters adapting their product vectors across markets

OpenAIRE

Fontagné, Lionel; Secchi, Angelo; Tomasi, Chiara

2014-01-01

This paper analyzes how multi-product firms adjust their exported product-mix across desti- nations. Using cross sections of Italian and French data, we show that firms do not follow a rigid ordering in their product mix exported in different markets but rather they adapt their choices to better match with country characteristics. By using metrics based on export shares and on sequences of product names we provide new insights on the extent a firm's products portfolio changes across destinati...

[Service productivity in hospital nursing--conceptual framework of a productivity analysis].

Science.gov (United States)

Thomas, D; Borchert, M; Brockhaus, N; Jäschke, L; Schmitz, G; Wasem, J

2015-01-01

Decreasing staff numbers compounded by an increasing number of cases is regarded as main challenge in German hospital nursing. These input reductions accompanied by output extensions imply that hospital nursing services have had to achieve a continuous productivity growth in the recent years. Appropriately targeted productivity enhancements require approved and effective methods for productivity acquisition and measurement. However, there is a lack of suitable productivity measurement instruments for hospital nursing services. This deficit is addressed in the present study by the development of an integrated productivity model for hospital nursing services. Conceptually, qualitative as well as quantitative aspects of nursing services productivity are equally taken into consideration. Based on systematic literature reviews different conceptual frameworks of service productivity and the current state of research in hospital nursing services productivity were analysed. On this basis nursing sensitive inputs, processes and outputs were identified and integrated into a productivity model. As an adequate framework for a hospital nursing services productivity model the conceptual approach by Grönroos/Ojasalo was identified. The basic structure of this model was adapted stepwise to our study purpose by integrating theoretical and empirical findings from the research fields of service productivity, nursing productivity as well as national and international nursing research. Special challenges existed concerning the identification of relevant influencing factors as well as the representation of nursing sensitive outputs. The final result is an integrated productivity model, which can be used as an adequate framework for further research in hospital nursing productivity. Research on hospital nursing services productivity is rare, especially in Germany. The conceptual framework developed in this study builds on established knowledge in service productivity research. The

Applying environmental product design to biomedical products research.

Science.gov (United States)

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

Preparing for Automated Derivation of Products in a Software Product Line

National Research Council Canada - National Science Library

McGregor, John D

2005-01-01

... to bring a product to market, or through other production improvements. Business goals such as these make automated product derivation an appealing strategy to a software product line organization...

Radioactivity distribution in phosphate products, by-products, effluents, and wastes

International Nuclear Information System (INIS)

Guimond, R.J.; Windham, S.T.

1975-08-01

Phosphate rock throughout the world contains uranium in concentrations ranging from a few ppM to a few hundred ppM. In the United States, phosphate rock normally contains between 100 to 150 ppM uranium. Mining and processing of these ores redistributes much of the uranium daughters among the various products, by-products, and wastes. These materials are then widely dispersed throughout the environment. This redistribution may lead to increased exposure of the public to these naturally-occurring radionuclides. In determining the magnitude of the population exposure caused by this redistribution and in developing environmental standards and controls to prevent contamination of the biosphere from these naturally-occurring radionuclides it is necessary to determine the concentrations and total quantities of these radionuclides in the products, by-products, effluents and wastes of phosphate mining and manufacturing. Samples of phosphate ores, products, by-products, effluents, and wastes were obtained and analyzed for their radioactivity content. Quantities of radioactivity entering the environment through various products, by-products, effluents, and wastes were estimated

The Impacts of Country-of-origin, Product Involvement, and Product Familiarity on Product Evaluation

OpenAIRE

Nugroho, Sahid Susilo; Rostiani, Rokhima; Gitosudarmo, Indriyo

2014-01-01

One of the most interesting phenomena in global business is the existence of a product’scountry-of-origin (COO). COO as an informational cue has been proven to affect consumer’spurchasing decisions in terms of their perception towards the product’s attributes as well astheir overall evaluation of the product. The objective of this study is to investigate the impacts ofcountry-of-origin on product evaluation in the Indonesian market by considering consumers’product familiarity and consumers’ p...

Comparison of Authorization/Registration/Notification Processes among Biocidal Products, Cosmetics, Plant Protection Products and Human Medicinal Products

OpenAIRE

Söyleriz, Yüksel

2015-01-01

In this study, comparison of the authorization/registration/notification processes of biocidal products, cosmetics, plant protection products and medicinal products are made and in this respect, the situation in EU is assessed.

Productivity analysis of sunflower production in Turkey

International Nuclear Information System (INIS)

Semerci, A.

2012-01-01

In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

Productive and Re-Productive Thinking in Solving Insight Problems

Science.gov (United States)

Cunningham, J. Barton; MacGregor, James N.

2014-01-01

Many innovations in organizations result when people discover insightful solutions to problems. Insightful problem-solving was considered by Gestalt psychologists to be associated with productive, as opposed to re-productive, thinking. Productive thinking is characterized by shifts in perspective which allow the problem solver to consider new,…

BRAND - PRODUCT INTERDEPENDENCE

Directory of Open Access Journals (Sweden)

Tudor NISTORESCU

2014-06-01

Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

Defining Product Intake Fraction to Quantify and Compare Exposure to Consumer Products.

Science.gov (United States)

Jolliet, Olivier; Ernstoff, Alexi S; Csiszar, Susan A; Fantke, Peter

2015-08-04

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example applications of the product intake fraction concept, for two chemicals in two personal care products and two chemicals encapsulated in two articles, showing how intakes of these chemicals can primarily occur during product use. We demonstrate the utility of the product intake fraction and its application modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products, or back-calculate maximum allowable concentrations of substances inside products.

EPD--environmental product declarations for wood products : an application of life cycle information about forest products

Science.gov (United States)

Richard Bergman; Adam Taylor

2011-01-01

Transparent and credible environmental labeling of products is vital for a sustainable future. Ecolabeling shows information on the environmental performance of products, processes, and services. This article focuses on one type of ecolabeling referred to as environmental product declarations (EPDs) that provide environmental impact information based on life cycle...

An Optimization Model for Product Placement on Product Listing Pages

Directory of Open Access Journals (Sweden)

Yan-Kwang Chen

2014-01-01

Full Text Available The design of product listing pages is a key component of Website design because it has significant influence on the sales volume on a Website. This study focuses on product placement in designing product listing pages. Product placement concerns how venders of online stores place their products over the product listing pages for maximization of profit. This problem is very similar to the offline shelf management problem. Since product information sources on a Web page are typically communicated through the text and image, visual stimuli such as color, shape, size, and spatial arrangement often have an effect on the visual attention of online shoppers and, in turn, influence their eventual purchase decisions. In view of the above, this study synthesizes the visual attention literature and theory of shelf-space allocation to develop a mathematical programming model with genetic algorithms for finding optimal solutions to the focused issue. The validity of the model is illustrated with example problems.

Radioisotope production

International Nuclear Information System (INIS)

1988-01-01

The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

Applying linear programming model to aggregate production planning of coated peanut products

Science.gov (United States)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

Efficiency and Import Penetrationon the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the ave-rage level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

One-carbon substrate-based biohydrogen production: microbes, mechanism, and productivity.

Science.gov (United States)

Rittmann, Simon K-M R; Lee, Hyun Sook; Lim, Jae Kyu; Kim, Tae Wan; Lee, Jung-Hyun; Kang, Sung Gyun

2015-01-01

Among four basic mechanisms for biological hydrogen (H2) production, dark fermentation has been considered to show the highest hydrogen evolution rate (HER). H2 production from one-carbon (C1) compounds such as formate and carbon monoxide (CO) is promising because formate is an efficient H2 carrier, and the utilization of CO-containing syngas or industrial waste gas may render the industrial biohydrogen production process cost-effective. A variety of microbes with the formate hydrogen lyase (FHL) system have been identified from phylogenetically diverse groups of archaea and bacteria, and numerous efforts have been undertaken to improve the HER for formate through strain optimization and bioprocess development. CO-dependent H2 production has been investigated to enhance the H2 productivity of various carboxydotrophs via an increase in CO gas-liquid mass transfer rates and the construction of genetically modified strains. Hydrogenogenic CO-conversion has been applied to syngas and by-product gas of the steel-mill process, and this low-cost feedstock has shown to be promising in the production of biomass and H2. Here, we focus on recent advances in the isolation of novel phylogenetic groups utilizing formate or CO, the remarkable genetic engineering that enhances H2 productivity, and the practical implementation of H2 production from C1 substrates. Copyright © 2014 Elsevier Inc. All rights reserved.

Linear Optimization Techniques for Product-Mix of Paints Production in Nigeria

Directory of Open Access Journals (Sweden)

Sulaimon Olanrewaju Adebiyi

2014-02-01

Full Text Available Many paint producers in Nigeria do not lend themselves to flexible production process which is important for them to manage the use of resources for effective optimal production. These goals can be achieved through the application of optimization models in their resources allocation and utilisation. This research focuses on linear optimization for achieving product- mix optimization in terms of the product identification and the right quantity in paint production in Nigeria for better profit and optimum firm performance. The computational experiments in this research contains data and information on the units item costs, unit contribution margin, maximum resources capacity, individual products absorption rate and other constraints that are particular to each of the five products produced in the company employed as case study. In data analysis, linear programming model was employed with the aid LINDO 11 software to analyse the data. The result has showed that only two out of the five products under consideration are profitable. It also revealed the rate to which the company needs to reduce cost incurred on the three other products before making them profitable for production.

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Toyota production system beyond large-scale production

CERN Document Server

Ohno, Taiichi

1998-01-01

In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

Production Function Geometry with "Knightian" Total Product

Science.gov (United States)

Truett, Dale B.; Truett, Lila J.

2007-01-01

Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

Singing emotionally: A study of pre-production, production, and post-production facial expressions

Directory of Open Access Journals (Sweden)

Lena Rachel Quinto

2014-04-01

Full Text Available Singing involves vocal production accompanied by a dynamic and meaningful use of facial expressions, which may serve as ancillary gestures that complement, disambiguate, or reinforce the acoustic signal. In this investigation, we examined the use of facial movements to communicate emotion, focusing on movements arising in three epochs: before vocalisation (pre-production, during vocalisation (production, and immediately after vocalisation (post-production. The stimuli were recordings of seven vocalists’ facial movements as they sang short (14 syllable melodic phrases with the intention of communicating happiness, sadness, irritation, or no emotion. Facial movements were presented as point-light displays to 16 observers who judged the emotion conveyed. Experiment 1 revealed that the accuracy of emotional judgement varied with singer, emotion and epoch. Accuracy was highest in the production epoch, however, happiness was well communicated in the pre-production epoch. In Experiment 2, observers judged point-light displays of exaggerated movements. The ratings suggested that the extent of facial and head movements is largely perceived as a gauge of emotional arousal. In Experiment 3, observers rated point-light displays of scrambled movements. Configural information was removed in these stimuli but velocity and acceleration were retained. Exaggerated scrambled movements were likely to be associated with happiness or irritation whereas unexaggerated scrambled movements were more likely to be identified as neutral. An analysis of the motions of singers revealed systematic changes in facial movement as a function of the emotional intentions of singers. The findings confirm the central role of facial expressions in vocal emotional communication, and highlight individual differences between singers in the amount and intelligibility of facial movements made before, during, and after vocalization.

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

Overcoming dualisms: socio-productive trayectories in the analysis of horticultural social structure's transformations in La Plata Superando dualismos: trayectorias socio-productivas en el abordaje de las transformaciones en la estructura social hortícola platense

Directory of Open Access Journals (Sweden)

María Alejandra Waisman

2011-01-01

, enlazado a esta postura teórica, se implementa una estrategia metodológica cualitativa, a partir de la utilización de entrevistas semiestructuradas y observación participante. Finalmente, en este trabajo se sostiene que las principales transformaciones acaecidas en el espacio social periurbano platense durante los '90, han afectado a la posición de productor.

A Production Model for Deteriorating Inventory Items with Production Disruptions

OpenAIRE

Yong He; Ju He

2010-01-01

Disruption management has recently become an active area of research. In this study, an extension is made to consider the fact that some products may deteriorate during storage. A production-inventory model for deteriorating items with production disruptions is developed. Then the optimal production and inventory plans are provided, so that the manufacturer can reduce the loss caused by disruptions. Finally, a numerical example is used to illustrate the model.

New salty waffle products "Fish Krekis" with fish & plant semifinished products

Directory of Open Access Journals (Sweden)

Fedorova Dina

2016-04-01

Full Text Available The study examines the directions of expansion of the range of wafer snack products of high nutritional value by using fish & plant semifinished products. The study scientifically grounds the benefits of using the new fish & plant semifinished products in manufacturing waffle salty snack products. The data provided in the article prove that the use of the fish & plant semifinished products & herbal ingredients enable a range of the new wafer snack products «Fish krekis» with high content of proteins, organic calcium, fiber and vitamins, with improved consumer properties, as well as more efficient use of Ukrainian raw fish materials.

Product competitiveness analysis for e-commerce platform of special agricultural products

Science.gov (United States)

Wan, Fucheng; Ma, Ning; Yang, Dongwei; Xiong, Zhangyuan

2017-09-01

On the basis of analyzing the influence factors of the product competitiveness of the e-commerce platform of the special agricultural products and the characteristics of the analytical methods for the competitiveness of the special agricultural products, the price, the sales volume, the postage included service, the store reputation, the popularity, etc. were selected in this paper as the dimensionality for analyzing the competitiveness of the agricultural products, and the principal component factor analysis was taken as the competitiveness analysis method. Specifically, the web crawler was adopted to capture the information of various special agricultural products in the e-commerce platform ---- chi.taobao.com. Then, the original data captured thereby were preprocessed and MYSQL database was adopted to establish the information library for the special agricultural products. Then, the principal component factor analysis method was adopted to establish the analysis model for the competitiveness of the special agricultural products, and SPSS was adopted in the principal component factor analysis process to obtain the competitiveness evaluation factor system (support degree factor, price factor, service factor and evaluation factor) of the special agricultural products. Then, the linear regression method was adopted to establish the competitiveness index equation of the special agricultural products for estimating the competitiveness of the special agricultural products.

Ethanol production

Energy Technology Data Exchange (ETDEWEB)

Kolleurp, F; Daugulis, A J

1985-05-01

Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

Economic production quantity models for imperfect product and service with rework

OpenAIRE

Tai, Allen H.

2012-01-01

When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

Product Platform Modeling

DEFF Research Database (Denmark)

Pedersen, Rasmus

for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

Estimating product-to-product variations in metal forming using force measurements

NARCIS (Netherlands)

Havinga, Gosse Tjipke; Van Den Boogaard, Ton

2017-01-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final

Coordiantion by using Product Specifications in Product Development

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1997-01-01

This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

Development of Product Availability Monitoring System In Production Unit In Automotive Component Industry

Science.gov (United States)

Hartono, Rachmad; Raharno, Sri; Yuwana Martawirya, Yatna; Arthaya, Bagus

2018-03-01

This paper described a methodology to monitor the availability of products in a production unit in the automotive component industry. Automotive components made are automotive components made through sheet metal working. Raw material coming into production unit in the form of pieces of plates that have a certain size. Raw materials that come stored in the warehouse. Data of raw each material in the warehouse are recorded and stored in a data base system. The material will then undergo several production processes in the production unit. When the material is taken from the warehouse, material data are also recorded and stored in a data base. The data recorded are the amount of material, material type, and date when the material is out of the warehouse. The material coming out of the warehouse is labeled with information related to the production processes that the material must pass. Material out of the warehouse is a product will be made. The products have been completed, are stored in the warehouse products. When the product is entered into the product warehouse, product data is also recorded by scanning the barcode contained on the label. By recording the condition of the product at each stage of production, we can know the availability of the product in a production unit in the form of a raw material, the product being processed and the finished product.

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Defining product intake fraction to quantify and compare exposure to consumer products

DEFF Research Database (Denmark)

Jolliet, Oliver; Ernstoff, Alexi; Csiszar, Susan A.

2015-01-01

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction...... of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example...... modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products...

QUANTIFYING SUPPLIERS’ PRODUCT QUALITY: AN EXPLORATORY PRODUCT AUDIT METHOD

Directory of Open Access Journals (Sweden)

S. Avakh Darestani

2012-01-01

Full Text Available

ENGLISH ABSTRACT:The quality of the raw material and supplied product from suppliers plays a critical role in the quality of the final product. It has become the norm that vehicle manufacturers require their suppliers to measure product quality and service with a product audit method. Measuring quality of product is emphasised by QS9000 VDA6.5 and ISO/TS16949. From a competitive standpoint, and also to see continuous improvement in business, companies need to monitor their suppliers’ performance. Quality and delivery are two very important indicators of supplier performance. This paper presents a statistical method for measuring the quality of supplied product. This method allocates different weights to variables and attributes characteristics. Moreover, following normal distribution, the tolerance zone is divided to three regions with different scores. Therefore, the quality of suppliers’ products can be monitored based on the Product Quality Audit Score (PQAS. However, this method may be employed for organisations to monitor their raw material, work-in-process parts, and final product. It can be an indicator to monitor supplier quality behaviour.

AFRIKAANSE OPSOMMING: Die gehalte van grondstowwe en produkte/komponente wat deur leweransiers verskaf word, speel ‘n kritiese rol in die gehalte van die finale produk. Dit het die norm geword in die motorvervaardigingsbedryf dat daar van leweransiers verwag word om hulle produkkwaliteit en –diens te meet by wyse van ‘n produkouditmetode. Die meting van produkkwaliteit word benadruk deur QS9000 VDA6.5 en ISO/TS16949. Uit ‘n mededingingshoek en ook om kontinue verbetering te monitor, is dit noodsaaklik dat leweransiers se verrigting gemeet word. Gehalte en aflewering is twee van die belangrikste indikatore van leweransiersverrigting. In hierdie artikel word ‘n statistiese model voorgehou vir die meting van die kwaliteit van die gelewerde produk. Die metode ken verskillende

COTTAGE CHEESE PRODUCTS FUNCTIONALITY

Directory of Open Access Journals (Sweden)

L. V. Golubeva

2015-01-01

Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

Tunnel production enhances quality in organic carrot seed production

DEFF Research Database (Denmark)

Deleuran, L C; Boelt, B

2009-01-01

production of open-pollinated carrot varieties increased the yield and germination percentages when compared with normal field conditions. Yield was in the range of 100-250 g and 2-17 g seeds m-2 respectively, and germination percentage was 84-95 and 43-55, respectively. However, hybrid carrot seed...... production showed lower yields than did their open-pollinated counterparts. Yields ranging from 60-123 g seeds m-2 can be obtained, but the production needs to be carefully planned and monitored. Different growing systems in tunnels have been studied in both open-pollinated and hybrid carrot (Daucus carota L......In Denmark, organic vegetable seed production is possible for some of the late-maturing species when the maturing is performed in lightweight tunnels which are also relevant for the isolation of small-scale production. The tunnel system offers several advantages, e.g., it is possible to control...

Evaluating the Impact of a New Product on the Sales of other Products

Directory of Open Access Journals (Sweden)

Julian Andreev Vasilev

2014-12-01

Full Text Available The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series analysis is carried in two datasets – quantities of sales of three products on a daily basis and on a monthly basis. The main methods used are time series analysis and regression analysis. The three time series (corresponding to the three products are separated into two parts – before and after launching the new product. It is proved that the new product does not affect the sales of the two other products. The new product is well accepted and its sales increase together with the sales of the two other products.

Comparison of Employer Productivity Metrics to Lost Productivity Estimated by Commonly Used Questionnaires.

Science.gov (United States)

Gardner, Bethany T; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C; Evanoff, Bradley

2016-02-01

The aim of the study was to assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Fifty-eight billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss.

Comparison of employer productivity metrics to lost productivity estimated by commonly used questionnaires

Science.gov (United States)

Gardner, Bethany T.; Dale, Ann Marie; Buckner-Petty, Skye; Van Dillen, Linda; Amick, Benjamin C.; Evanoff, Bradley

2016-01-01

Objective To assess construct and discriminant validity of four health-related work productivity loss questionnaires in relation to employer productivity metrics, and to describe variation in economic estimates of productivity loss provided by the questionnaires in healthy workers. Methods 58 billing office workers completed surveys including health information and four productivity loss questionnaires. Employer productivity metrics and work hours were also obtained. Results Productivity loss questionnaires were weakly to moderately correlated with employer productivity metrics. Workers with more health complaints reported greater health-related productivity loss than healthier workers, but showed no loss on employer productivity metrics. Economic estimates of productivity loss showed wide variation among questionnaires, yet no loss of actual productivity. Conclusions Additional studies are needed comparing questionnaires with objective measures in larger samples and other industries, to improve measurement methods for health-related productivity loss. PMID:26849261

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

Product Category Layout and Organization: Retail Placement of Food Products

NARCIS (Netherlands)

Herpen, van E.

2016-01-01

This article discusses the placement of food products in retail stores, in particular how the placement of food products can influence how consumers perceive the store in general and these products in particular. It reviews the overall layout of the store, assortment organization, and shelf

Biofuels versus food production: Does biofuels production increase food prices?

International Nuclear Information System (INIS)

Ajanovic, Amela

2011-01-01

Rapidly growing fossil energy consumption in the transport sector in the last two centuries caused problems such as increasing greenhouse gas emissions, growing energy dependency and supply insecurity. One approach to solve these problems could be to increase the use of biofuels. Preferred feedstocks for current 1st generation biofuels production are corn, wheat, sugarcane, soybean, rapeseed and sunflowers. The major problem is that these feedstocks are also used for food and feed production. The core objective of this paper is to investigate whether the recent increase of biofuels production had a significant impact on the development of agricultural commodity (feedstock) prices. The most important impact factors like biofuels production, land use, yields, feedstock and crude oil prices are analysed. The major conclusions of this analysis are: In recent years the share of bioenergy-based fuels has increased moderately, but continuously, and so did feedstock production, as well as yields. So far, no significant impact of biofuels production on feedstock prices can be observed. Hence, a co-existence of biofuel and food production seems possible especially for 2nd generation biofuels. However, sustainability criteria should be seriously considered. But even if all crops, forests and grasslands currently not used were used for biofuels production it would be impossible to substitute all fossil fuels used today in transport.

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Product Platform Performance

DEFF Research Database (Denmark)

Munk, Lone

The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

Formulation of a Production Strategy for a Software Product Line

Science.gov (United States)

2009-08-01

Strategy 9 5.1 Identifying the Critical Factors 9 5.1.1 Market Analysis 10 5.1.2 Building a Business Case 10 5.1.3 Scoping 10 5.1.4 Technology...ability to deliver new products quickly (i.e., its time to market ). The production strategy for a software product line is the high-level description of... strategy . The critical factors mentioned above refer to both market conditions that affect an organ- ization and how an organization’s products can

Product prioritization in a two-stage food production system with intermediate storage

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the performance improvements for the prioritized product, as well as the negative effects for the other products. We also show how the effect decreases with more storage tanks, and increases with more products....... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

Heavy Flavour Production

CERN Document Server

Nason, Paolo; Ridolfi, Giovanni

1995-01-01

We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

Making online products more tangible : the effect of product presentation formats on product evaluations

NARCIS (Netherlands)

Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

2016-01-01

Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that

Production and distribution of livestock products in Aomori prefecture: Part 1

International Nuclear Information System (INIS)

Iyogi, Takashi; Hisamatsu, Shun'ichi; Inaba, Jiro

2000-01-01

We have collected natural and sociological environmental data related to the estimation of radiation dose by radionuclides which will be released from nuclear fuel cycle facilities. Published data concerning production and distribution of livestock products in Aomori Prefecture were collected and compiled. We tried to estimate market dilution coefficient, which is the ratio of local products to total consumption by people in a target area, for the livestock products from the compiled data under some assumptions. Production weight per unit field area (production density) and consumption rates of grass and feed by the domestic animals were also estimated by using the collected data. Estimated means of the market dilution coefficients for livestock products and production density of grass were lower than those used in the environmental assessment for a reprocessing plant now under construction in Rokkasho Village. Consumption rates of grass and feed by milk cows and beef cattle were higher than those used in the assessment. Since we assumed that milk cows and beef cattle of Aomori Prefecture consume only grass and feed produced in Aomori Prefecture, the rates may be overestimated. Further study is required to clarify this point. We collected 52 reports in the literature related to transfer reduction of radionuclides to livestock products and decontamination of the radionuclides. (author)

Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

Directory of Open Access Journals (Sweden)

K. A. Halim

2011-01-01

Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

Generalized product

OpenAIRE

Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

2014-01-01

Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

Workforce productivity.

Science.gov (United States)

Williams, Ruth

2012-10-26

Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

Productivity and production efficiency among small scale irrigated ...

African Journals Online (AJOL)

The study examined productivity and production efficiency among small scale irrigated sugarcane farmers in Niger State, Nigeria using a stochastic translog frontier function. Data for the study were obtained using structured questionnaires administered to 100 randomly selected sugarcane farmers from Paiko and Gurara ...

Leading co-production

DEFF Research Database (Denmark)

Tortzen, Anne

leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

The economic production lot size model with several production rates

DEFF Research Database (Denmark)

Larsen, Christian

should be chosen in the interval between the demand rate and the production rate, which minimize unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed form solutions for the optimal runtimes as well as the minimum average cost. Finally we...

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Fission products collecting devices

International Nuclear Information System (INIS)

Matsumoto, Hiroshi

1979-01-01

Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

Urinary incontinence products

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

Production control system specified quality sausage products

Directory of Open Access Journals (Sweden)

A. V. Tokarev

2016-01-01

Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

All Plasma Products Are Not Created Equal: Characterizing Differences Between Plasma Products

Science.gov (United States)

2015-06-01

Research and the US Department of Defense. The pooling and solvent detergent treatment processes performed to manufacture the Octaplas and Kedrion products ...All plasma products are not created equal: Characterizing differences between plasma products Philip C. Spinella, MD, Elfaridah Frazier, PhD, Heather... products that may affect efficacy and safety. METHODS: Four different plasma products were analyzed to include fresh frozen plasma (FFP), liquid plasma

COMPETITIVE PRODUCT ADVANTAGES

Directory of Open Access Journals (Sweden)

Adrian MICU

2006-01-01

Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

Primary productivity

Digital Repository Service at National Institute of Oceanography (India)

Verlecar, X.N.; Parulekar, A.H.

Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

Extended Producer Responsibility and Product Stewardship for Tobacco Product Waste.

Science.gov (United States)

Curtis, Clifton; Collins, Susan; Cunningham, Shea; Stigler, Paula; Novotny, Thomas E

2014-09-01

This paper reviews several environmental principles, including Extended Producer Responsibility (EPR), Product Stewardship (PS), the Polluter Pays Principle (PPP), and the Precautionary Principle, as they may apply to tobacco product waste (TPW). The review addresses specific criteria that apply in deciding whether a particular toxic product should adhere to these principles; presents three case studies of similar approaches to other toxic and/or environmentally harmful products; and describes 10 possible interventions or policy actions that may help prevent, reduce, and mitigate the effects of TPW. EPR promotes total lifecycle environmental improvements, placing economic, physical, and informational responsibilities onto the tobacco industry, while PS complements EPR, but with responsibility shared by all parties involved in the tobacco product lifecycle. Both principles focus on toxic source reduction, post-consumer take-back, and final disposal of consumer products. These principles when applied to TPW have the potential to substantially decrease the environmental and public health harms of cigarette butts and other TPW throughout the world. TPW is the most commonly littered item picked up during environmental, urban, and coastal cleanups globally.

Production of carboxylic acid and salt co-products

Science.gov (United States)

Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

2014-09-09

This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

Sustainable aggregates production : green applications for aggregate by-products.

Science.gov (United States)

2015-06-01

Increased emphasis in the construction industry on sustainability and recycling requires production of : aggregate gradations with lower dust (cleaner aggregates) and smaller maximum sizeshence, increased : amount of quarry by-products (QBs). QBs ...

Product plots.

Science.gov (United States)

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

improving citric acid production from some carbohydrates by-products using irradiated aspergillus niger

International Nuclear Information System (INIS)

Farag, S.S.

2011-01-01

Twenty strains of A. niger were isolated from different sources, screened for their capacity to produce citric acid. All the isolated strains were able to produce citric acid in different quantities at different time intervals i.e. 4, 8 and 12 days on indicator medium. The best incubation period for production for all isolates was 12 days. The most potent strains for production were A 1 , A 4 and A 5 , while A 8 , A 1 6, A 18 and A 19 recorded weak production on that medium. Citric acid productivity were obtained by all strains when using different concentrations of four carbohydrate by-products (maize straw, potato peel wastes, sugar beet pulp and molasses) when each used alone without any additions after 12 days incubation and the production enhanced when the fermentation medium amended with the same concentrations of the mentioned substrates. Type and concentration of carbohydrate by-product affect the production of citric acid by A. niger strains under the study. Increasing substrate concentration led to increase in production, the best concentration for production was 25% for all carbohydrate by-products. As recorded with indicator medium, A 1 , A 4 and A 5 are also the most potent strains for production when growing on the four carbohydrate by-products supplemented to the basal medium, while A 8 , A 6 , A 18 and A 19 recorded the weak production with the carbohydrate by-products used.production of the parental isolates A 1 , A 4 and A 5 on indicator medium were: 0.96, 0.95 and 0.99 (mg/ml) respectively after 12 days incubation, while maximum production by the obtaining resulting isolates (Treated by UV irradiation) were: 1.78, 1.70 and 1.73 (mg/ml) from A 4 T 2 (5 min.), A 4 T 1 (10 min.) and A 1 T 1 (5 min.), respectively.

Advances in production technology

CERN Document Server

2015-01-01

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Smart consumer products with a pathfinder product development strategy

Science.gov (United States)

Robertson, Alec

1994-09-01

It is generally acknowledged that technologies diffuse through industry and that the rate of diffusion varies both within different industries and according to the circumstances. Innovation is a process involving risk, especially during the adoption and adaptation of a powerful new technology. Central to a consumer products success using new technology is the quality of their designs and the nature of their forms. Form is of prime importance in influencing the purchasing decisions of consumers and it is also influential in determining the relationships between people in its use environment. The acceptance of a new product into the world is often unduly ad hoc. Many failures are created for each success and there are few guidelines to assist the formulation of a strategy for creating an appropriate form. It is suggested below that success of consumer products incorporating 'smart structures' may be determined not only by the function of products and systems, but also by the form they take. The definition of a desirable product form depends entirely on the point of view taken: technological, commercial, ecological, cultural, and social. However any design using new will incorporate the old and the new. The probability of acceptance of a new product is enhanced by maintaining a fine balance between imaginative and creative form and that with which people are familiar and prefer: a new design may be rejected if it is too novel and unfamiliar, or too traditional. The acceptance of a new product and its subsequent development depends on the success designers and engineers have when dealing with the initial forms, particularly using new technology such as 'smart structures'.

Polling, production & priorities

NARCIS (Netherlands)

Winands, E.M.M.

2007-01-01

Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

Production of highly unsaturated fatty acids using agro-processing by-products

CSIR Research Space (South Africa)

Jacobs, A

2008-11-01

Full Text Available The South African agro-processing industry generates millions of tons of cereal derived by-products annually. The by-products from biofuel production are expected to increase these volumes dramatically. Highly unsaturated fatty acids (HUFA...

Evaluating the Impact of a New Product on the Sales of other Products

OpenAIRE

Julian Andreev Vasilev

2014-01-01

The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series an...

MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis

DEFF Research Database (Denmark)

Mattei, Michele; Yunus, Nor Alafiza Binti; Kalakul, Sawitree

2014-01-01

The objective of this paper is to present new methods for design of chemicals based formulated products and their implementation in the software, the Virtual Product-Process Design Laboratory. The new products are tailor-made blended liquid products and emulsion-based products. The new software...

Modeling intermediate product selection under production and storage capacity limitations in food processing

DEFF Research Database (Denmark)

Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

2009-01-01

In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs and pro...... with production and inventory planning, thereby considering the production and storage capacity limitations. The resulting model can be used to solve an important practical problem typical for many food processing industries.......In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs...... and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

Production Leveling (Heijunka) Implementation in a Batch Production System: A Case Study

OpenAIRE

Araujo , Luciano Fonseca; Queiroz , Abelardo Alves

2009-01-01

International audience; This paper presents a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch production in a make-to-stock policy. Regarding a qualitative assessment, evidences show that the company had deficient practices related to...

Economic Feasibility of Functional Meat Products for Commercial Production in India

Directory of Open Access Journals (Sweden)

Varalakshmi Kandanuri

2017-07-01

Full Text Available This paper analyses the production of functional chicken meat products from economic perspectives. It analyses and compares the economics and investment feasibility on different size groups of processing plants in India. The primary data on input use and output yield were taken from studies of NRCM and data was analysed using economic analysis and investment appraisal techniques like NPV, IRR(%, BC ratio, and Break even analysis. The results indicated that the cost of production of functional products was 5.2 and 5.18 and 4.59 US dollars per kg on small, medium and large scale units respectively. All the processing units are found to be economically feasible with NPV of US$ 12727, 64661 and 153703, IRR of 26%,31% and 42% and B-C ratio was estimated as 1.56, 1.78 and 2.29 for small, medium and large scale units respectively. Economies of scale is evident form all perspectives like production costs, profits, discounting measures and breakeven point. The study found the feasibility of functional meat products in India for commercial production.

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

Optimal Product Placement.

Science.gov (United States)

Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

2017-01-01

We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

Thermophilic Biohydrogen Production

DEFF Research Database (Denmark)

Karakashev, Dimitar Borisov; Angelidaki, Irini

2011-01-01

Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

Production planning of a perishable product with lead time and non-stationary demand

NARCIS (Netherlands)

Pauls-Worm, K.G.J.; Haijema, R.; Hendrix, E.M.T.; Rossi, R.; Vorst, van der J.G.A.J.

2012-01-01

We study a production planning problem for a perishable product with a fixed lifetime, under a service-level constraint. The product has a non-stationary stochastic demand. Food supply chains of fresh products like cheese and several crop products, are characterised by long lead times due to

Validation of Product Properties Considering a High Variety of Complex Products

OpenAIRE

Kortler, S.;Kohn, A.;Lindemann, U.

2017-01-01

Validation processes are becoming more and more complex. Due to rising technical capabilities and a wide variety of customer requirements, OEMs are increasing their product variety in order to increase profits. According to the various characteristics of subcontracted components involved in complex products, the product variety can be very high. The impacts of the involved subcontracted components on the composed product variety during the product’s application are difficult to predict. This ...

Enriching step-based product information models to support product life-cycle activities

Science.gov (United States)

Sarigecili, Mehmet Ilteris

The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

Engineering microbial cell factories for the production of plant natural products: from design principles to industrial-scale production.

Science.gov (United States)

Liu, Xiaonan; Ding, Wentao; Jiang, Huifeng

2017-07-19

Plant natural products (PNPs) are widely used as pharmaceuticals, nutraceuticals, seasonings, pigments, etc., with a huge commercial value on the global market. However, most of these PNPs are still being extracted from plants. A resource-conserving and environment-friendly synthesis route for PNPs that utilizes microbial cell factories has attracted increasing attention since the 1940s. However, at the present only a handful of PNPs are being produced by microbial cell factories at an industrial scale, and there are still many challenges in their large-scale application. One of the challenges is that most biosynthetic pathways of PNPs are still unknown, which largely limits the number of candidate PNPs for heterologous microbial production. Another challenge is that the metabolic fluxes toward the target products in microbial hosts are often hindered by poor precursor supply, low catalytic activity of enzymes and obstructed product transport. Consequently, despite intensive studies on the metabolic engineering of microbial hosts, the fermentation costs of most heterologously produced PNPs are still too high for industrial-scale production. In this paper, we review several aspects of PNP production in microbial cell factories, including important design principles and recent progress in pathway mining and metabolic engineering. In addition, implemented cases of industrial-scale production of PNPs in microbial cell factories are also highlighted.

CONSIDERATIONS UPON MILK AND DAIRY PRODUCT PRODUCTION IN THE U.S.A.

Directory of Open Access Journals (Sweden)

AGATHA POPESCU

2008-05-01

Full Text Available The paper aimed to present the evolution of milk production and dairy products in the USA during the period 2004-2006, based on USDA Statistics. The USA is a top produce of milk and dairy products in the world. Milk production accounted for 181,798 Millions Pounds in the year 2006. Its continuously increase during the last years has been positively influenced by the increasing number of dairy cows and average milk yield . The top states are California, Wisconsin, New York, Idaho and Pennsylvania, which all together achieve about 54 % of the country milk production. Over 99.37 % of Milk Production is marketed. Considering all milk marketings, Million USD 23,422 cash receiptscould be obtained from a dairy farm in the year 2006. The average return per Cwt was about USD 13 in 2006 . Milk is processed by about 1,000 manufacturing plants in a large variety of dairy products. Cheese production was about 9.5 Billion Pounds in the last analyzed years. The US also produces important amounts of butter , yogurt, ice cream etc. About 8.3 % of the US dairy products are exported, the most markets being Japan, Mexico and Canada.

How companies embed non-quantifiable product qualities through their product development process

OpenAIRE

Guldbrandsen, Marianne Norden

2006-01-01

Many consumer products have reached a high level of technical product quality. Rapid adoption of new technologies and access to a global market means that markets are getting saturated. This means that technical differentiation is often not enough to sell a product and products compete more and more on intangible product qualities - these are meant to delight, bring pleasure, be easy to use and to create an experience. These qualities are often difficult to measure in the pr...

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

A CONTABILIDADE DA DESAPROPRIAÇÃO: UM EXAME PRELIMINAR SOBRE O CIRCUITO INFERIOR DA EXPANSÃO URBANA DA METRÓPOLE DE SÃO PAULO

Directory of Open Access Journals (Sweden)

Carlos Alberto Rizzi

2017-03-01

Full Text Available No final da década de 2000, com a iminência da construção de mais um trecho do Rodoanel Mário Covas, seu trecho Norte, viabilizado por recursos provenientes do Programa de Aceleração do Crescimento – PAC para o transporte, a questão dos fundos de consumo, isto é, dos espaços periurbanos da metrópole paulista, ganhou importância para os agentes do capital atuantes no espaço urbano. Em 2007, foram realizadas entrevistas com a Defesa Civil da sub-prefeitura Brasilândia-Freguesia do Ó e com o sub-prefeito de Jacanã- Tremembé. Também foram realizados trabalhos de campo, nesse mesmo ano, em áreas dessas referidas sub-prefeituras e também na região da “Cratera” e “Colônia”, na zona sul de São Paulo, região conhecida como Parelheiros. Esses campos e entrevistas foram realizados com o objetivo de se observar a questão da urbanização periurbana da Metrópole de São Paulo e sua relação com áreas legalmente protegidas. O texto a seguir é composto de informações extraídas dessas fontes secundárias reforçadas por dados oficiais e estruturado a partir de determinados referenciais teóricos da geografia crítica contemporânea.

Horticultura periurbana: Implementación de un programa de “buenas prácticas” en Pilar

Directory of Open Access Journals (Sweden)

Luciana Galván

2010-07-01

Full Text Available La producción de verduras que se realiza en la periferia exterior del Área Metropolitana de Buenos Aires (AMBA constituye una actividad esencial a la hora de asegurar el abastecimiento alimentario cotidiano de 13 millones de habitantes. El trabajo se propone sistematizar la experiencia de implementación de un programa que se está llevando a cabo actualmente con 74 productores que se localizan en el partido de Pilar, uno de los más afectados por el avance de la urbanización. El mismo, denominado PRO.A.A.S. (Promoción de la Actividad Agropecuaria Sustentable, se ha instituido durante 2007 a través de un convenio formalizado entre la Municipalidad de Pilar y el Instituto Nacional de Tecnología Agropecuaria. Tiene como propósito que los horticultores, en su gran mayoría de origen boliviano, mejoren sus procedimientos a través de “buenas prácticas” tecno-productivas. El trabajo pretende determinar en qué medida este tipo de experiencias interpelan al investigador sobre los modos de la urbanización en una metrópolis como Buenos Aires considerando que el periurbano, un espacio de interfase urbano-rural, constituye un territorio “de borde”, con la carga simbólica y las dificultades de abordaje metodológico que su situación “transicional” trae aparejada.

Verde urbano e processi ambientali: per una progettazione di paesaggio multifunzionale

Directory of Open Access Journals (Sweden)

Raffaele Pelorosso

2013-04-01

Full Text Available L’impermeabilizzazione delle superfici determina un’alterazione del sistema idrologico, con un incremento dei volumi e dei picchi dei deflussi delle acque meteoriche. Il fenomeno è destinato a progredire, sia per il contributo che vi deriva dalla costante crescita delle superfici urbanizzate (urban sprawl, sia per i cambiamenti climatici in atto, che accentuano la frequenza delle piogge critiche. Una serie di misure e tecniche (Best Management Practices, BMPs sono state sviluppate per la gestione sostenibile delle acque meteoriche urbane. Alcune  BMPs (es: verde pensile, bacini di detenzione/ritenzione, zone umide possono svolgere inoltre una funzione ecologica (divenendo habitat per specie animali e vegetali, di termoregolazione, estetica e di promozione del capitale sociale. È quindi necessario sperimentare metodologie di progettazione e gestione del verde urbano e periurbano, la cui multifunzionalità consente di perseguire la strada della sostenibilità ambientale. Su tale traccia, questo lavoro presenta un percorso metodologico orientato a valutare alcune strategie integrate di controllo dei deflussi urbani, attraverso l’aumento della permeabilità di alcune parti sensibili di città. Il verde, quindi, non è visto come semplice infrastruttura necessaria a soddisfare generici standard urbanistici, ma ne sono analizzate le funzionalità, in questa prima fase di carattere idrologico, ma che, in prospettiva, con la stessa armatura verde, esso può assumere un ruolo ecologico, sociale, di mitigazione del clima e di emissione di gas clima-alteranti.

Turismo y contaminación ambiental en la periferia urbana de Acapulco: Ciudad Renacimiento

Directory of Open Access Journals (Sweden)

Rocío López Velasco

2012-01-01

Full Text Available Nuestro estudio aborda los problemas de sostenibilidad del desarrollo turístico de una ciudad como la de Acapulco, donde se experimenta un desarrollo desigual y excluyente; enfocándonos en los espacios periurbanos donde el deterioro ambiental y la contaminación son consustanciales a la escasez de servicios y a la presencia de pobreza. Ciudad Renacimiento, forma parte del área periurbana de la ciudad y personifica un sector poblacional donde se detectan diferentes fuentes de contaminación. Metodología: se aplicó la técnica: Evaluación Rápida de Fuentes de Contaminación Ambiental (ERFCA para detectar fuentes de contaminación en una zona urbana donde la actividad industrial es incipiente, pero las actividades comerciales y de servicios abundan. Conclusiones: Se constató que el turismo no planeado se convierte en un obstáculo para un desarrollo sustentable; Acapulco es un ejemplo de ello, pues en él se reproducen las asimetrías socioeconómicas que impiden un desarrollo integral. De igual manera, como en otras latitudes, en Acapulco el turismo enfrenta dos alternativas: la sustentabilidad o la modernidad globalizadora, un reto de difícil integración en nuestro país, debido a lapobreza existente y a las dificultades para impulsar un crecimiento equilibrado, el cual es hoy por hoy una prioridad indiscutible.

Leishmaniosis tegumentaria en Las Lomitas, Provincia de Formosa, Argentina, 1992-2001

Directory of Open Access Journals (Sweden)

O. D. Salomón

2002-12-01

Full Text Available Entre 1992 y el 2001 el hospital de Las Lomitas notificó 85 casos de leishmaniosis tegumentaria, 72.9% en hombres, 91.8% en mayores de 10 años, y el 10.5% con manifestación mucosa. La presentación clínica más frecuente fue la úlcera simple en miembros inferiores. Las características epidemiológicas y clínicas fueron compatibles con la infección debida a Leishmania (Viannia braziliensis. La distribución anual de aparición de lesiones fue bimodal, la abundancia mostró asociación con el caudal del río Bermejo y la precipitación pluvial del año anterior. La intradermorreacción y la anamnesis sugieren como principal actividad de riesgo la pesca en el río. Se colectaron 1018 Phlebotominae, Lutzomyia neivai (97.1%, L. migonei (2.3% y L. cortelezzii (0.6%, la proporción peridomicilio/bosque en galería del río Bermejo fue 1/9, en composición semejante a las poblaciones del mismo río en la provincia de Salta. El incremento de casos observado desde 1992, la ejecución de obras de desarrollo que implican cambios ambientales, y la potencialidad de instalación de un ciclo periurbano vuelven necesario implementar un programa de vigilancia activa entomológica y de casos en el área chaqueña.

De las áreas ecológicas significativas al Plan de Ordenamiento Territorial de Montevideo

Directory of Open Access Journals (Sweden)

Miguel Ángel Bartorila

2010-01-01

Full Text Available En ámbitos metropolitanos el medio natural y el medio artificial pugnan y compiten uno sobre otro. Sus desarrollos, aparentemente desconectados, tienen importantes puntos en común. El interés por abordar, en un mismo nivel, los procesos que conforman los ecosistemas naturales y el artefacto urbano nos abren el camino al estudio de los ecosistemas en la ciudad y al urbanismo de redes (Dupuy, 1998. Este artículo presenta los resultados parciales de una investigación (tesis doctoral que pretende señalar la importancia de la determinación de las denominadas areas ecológicas significativas en la práctica del urbanismo. A través del análisis de caso de la ciudad de Montevideo, Uruguay, se caracterizan detalles de los aspectos espaciales y temporales de los ecosistemas naturales en la ciudad, señalando la manera en que se reconocen y se integran en el planeamiento territorial. Existen instrumentos de análisis y estudios que colaboran en la determinación espacialmente compleja de la realidad natural de los territorios. Será por medio de la revisión de trabajos de otros autores como se busca conocer la manera como ha sido estudiado e interpretado el conocimiento e interrelación de los ecosistemas y la ciudad, lo que permitirá en consecuencia, obtener instrumentos urbanísticos para delimitar y revalorizar los ecosistemas naturales intra y periurbanos.

Simulation Study of a Vehicle Production Line for Productivity Improvement

Directory of Open Access Journals (Sweden)

M.F.F. Ab Rashid

2015-06-01

Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

GROWTH PERFORMANCE AND PRODUCTIVITY OF RUBBER & PLASTIC PRODUCTS INDUSTRY IN PUNJAB

Directory of Open Access Journals (Sweden)

GULSHAN KUMAR

2010-01-01

Full Text Available Present study is an endeavour to investigate growth pattern and productivity trends in small scale rubber and plastic products industry of Punjab. The growth of industry has been gauged in terms of variables - number of units, fixed investment, employment and production. Yearly growth rates have been computed to catch year- to- year fluctuations in growth and compound annual growth rates (CAGRs have been worked out to ascertain the impact of the policies of liberalized regime on growth of this industry. Productivity trends have been sketched in terms of partial factor productivities of labour and capital. In order to understand the strengths and weaknesses of the industry, SWOT analysis has been conducted. The study revealed that the liberalisation has promoted the use of capital intensive and labour saving techniques of production leading to a dismal growth of employment and sluggish growth of number of units.

Health products inspection

International Nuclear Information System (INIS)

Stoltz, M.

2009-01-01

To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

Chemical Product Design

DEFF Research Database (Denmark)

Gani, Rafiqul

2004-01-01

This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

Production and economic characteristics of sheep production on the island of Pag

Directory of Open Access Journals (Sweden)

Marina Krvavica

2012-03-01

Full Text Available The aim of the research was to learn from a survey about the production and economic characteristics of sheep production as well as economic position and developmental orientation of sheep breeders on the island of Pag. Data on production and economic characteristics of sheep production on the island of Pag were collected from a survey and processed through relevant descriptive statistics methods. The respondents have on average 47 breeding sheep, 2 rams and 9 sheep intended for flock renewal rate (not older than one year; which means an average flock has 58 sheep. The average total income from sheep production in 2009 was 72,460.10 HRK. The average total production costs in 2009 were 13,260.10 HRK, including the costs of fodder and veterinary services. All farms achieved positive financial results of 59,199.90 HRK in average. As many as three quarters of respondents indicated profitability of sheep production as the main motivation to engage in sheep production; very few indicated that heritage and inability to do other jobs were the main motivation. Important limiting factors for future development of sheep breeding on the island of Pag in most farms are lack of potential heirs and high average age of farm holders. Regarding the effects of joining the European Union, half the breeders intend to improve their production and harmonise it with the EU requirements and standards; one quarter of them intend to keep the existing production capacity; and another quarter intend to quit with production.

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

Product, Organizational and Performance Effects of Product Modularity

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2014-01-01

beyond these industries. To be able to establish whether firms not part of these industries would experience the same performance effects, survey research will be needed. To support future survey research, this paper proposes an operationalization of product modularity and details the link between...... product modularity and firm performance, to support the future development of measures and hypotheses....

Is past academic productivity predictive of radiology resident academic productivity?

Science.gov (United States)

Patterson, Stephanie K; Fitzgerald, James T; Boyse, Tedric D; Cohan, Richard H

2002-02-01

The authors performed this study to determine whether academic productivity in college and medical school is predictive of the number of publications produced during radiology residency. The authors reviewed the records of 73 radiology residents who completed their residency from 1990 to 2000. Academic productivity during college, medical school, and radiology residency, other postgraduate degrees, and past careers other than radiology were tabulated. The personal essay attached to the residency application was reviewed for any stated academic interest. Residents were classified as being either previously productive or previously unproductive. Publication rates during residency and immediately after residency were compared for the two groups. For the productive residents, a correlation analysis was used to examine the relationship between past frequency of publication and type of previous activity. Least-squares regression analysis was used to investigate the relationship between preresidency academic productivity, advanced degrees, stated interest in academics, and other careers and radiology residency publications. There was no statistically significant difference in the number of articles published by those residents who were active and those who were not active before residency (P = .21). Only authorship of papers as an undergraduate was weakly predictive of residency publication. These selected measures of academic productivity as an undergraduate and during medical school are not helpful for predicting publication during residency. There was no difference in publication potential between those residents who were academically productive in the past and those who were not.

Nephrotoxicity of Natural Products.

Science.gov (United States)

Nauffal, Mary; Gabardi, Steven

2016-01-01

The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

Dictionaries for text production

DEFF Research Database (Denmark)

Fuertes-Olivera, Pedro; Bergenholtz, Henning

2018-01-01

Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

SMART Product Innovation

DEFF Research Database (Denmark)

Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

2016-01-01

. The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

Sustainable hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

Probiotic fermented dairy products

OpenAIRE

Adnan Tamime; Rajka Božanić; Irena Rogelj

2003-01-01

Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

Measuring green productivity of country: A generlized metafrontier Malmquist productivity index approach

International Nuclear Information System (INIS)

Yu-Ying Lin, Eugene; Chen, Ping-Yu; Chen, Chi-Chung

2013-01-01

This paper measures environmental productivity in 70 countries over the period 1981–2007. Differences in green (environmental) productivity growth across countries under distinct country specific production frontier are measured using directional distance function model, which incorporates desirable output (GDP) and undesirable output (CO 2 emissions). The metafrontier which envelops the two country groups, developed countries and developing countries, are estimated using balanced panel data for the sample countries over the study period. A parametric method is used to compute technical efficiency change, technical change, and scale efficiency change, which aggregate to the generalized metafrontier Malmquist productivity index. The overall results indicated the two country groups operated under distinct stochastic production frontiers and therefore used different production technologies. It is found that developing countries achieved higher growth in their average environmental productivity relative to the metafrontier. Thus the results coincide with the convergence growth theory

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Study of by-products of agro-food industries which could be used for bio-fuel production (animal fat, used food oils, and wine production by-products). Synthesis of the final report

International Nuclear Information System (INIS)

Gomy, Catherine; Thonier, Gregoire; Gagnepain, Bruno; Mhiri, Tarek

2015-04-01

As the Renewable Energy directive proposes the implementation of incentive arrangements for the production of bio-fuels from biomass, this report proposes a synthesis of a study which addressed three by-products of agro-food industry and of catering (collective, traditional, fast) which can help to reach objectives of energy production from biomass: used food oils, rendered animal fat of category 1 and 2, and vinification by-products (grape marc, lees, sludge). The objectives were to quantify, at the French national and regional levels, present resources and uses for these three by-products, non-valorised volumes and thus potentially available volumes for the production of liquid bio-fuels, to identify present actors and their interactions, and to study the potential of local production of liquid bio-fuels. The study comprised a comprehensive analysis of production and valorisation sectors for the three addressed types of by-products, and an identification of recent experiments implemented for the production of liquid bio-fuels. This synthesis states the lessons learned from the study of these three different sectors, and proposes recommendations for further developments

[Legislative regulation of production and turnover of products for people with different diseases].

Science.gov (United States)

Pritul'skaia, N V; Motuzka, Iu N; Antiushko, D L

2013-01-01

This article presents results of analysis of existing regulatory documents and approaches to the legislative regulation of production and turnover of special dietary products for people with specific diseases in EU, Ukraine and Russian Federation. According to the EU legislation, production and turnover of food products for nutritional support of people during specific diseases and the rehabilitation period are regulated by the Commission Directive 1999/21/EC, 2009/39/ES, by Regulation Commission (EU) No 953/2009 and documents of Codex Committee. Special food products for people with specific diseases in Ukrainian legislation are classified as nutrition products for special dietary use and are regulated by the following Laws of Ukraine "On the safety and quality of food", "On ensuring of sanitary and epidemiological welfare of the population", "On Consumer Rights Protection", "On advertising" and by other non-legislative acts. According to the current legislation of the Russian Federation, the products for people with specific diseases are classified as healthy dietary food products. The basis of the legal framework are federal laws "On the quality and safety of food", "On the sanitary-epidemiological welfare of the populations", "On technical regulations and technical regulations of the Customs Union "On Food Safety" and "On the safety of certain types of specialized food products, including healthy dietary food products and therapeutic dietary food products". There is no common approach to the legal regulation of production and turnover of products for people with specific diseases in the world. The proposals for further harmonization of regulatory control in this area have been developed.

Product derivation in software product families : a case study

NARCIS (Netherlands)

Deelstra, S; Sinnema, M; Bosch, J

2005-01-01

From our experience with several organizations that employ software product families, we have learned that, contrary to popular belief, deriving individual products from shared software assets is a time-consuming and expensive activity. In this paper we therefore present a study that investigated

Supporting product-servicing networks

NARCIS (Netherlands)

Camarihna-Matos, L.M.; Ferrada, F.; Oliveira, A.I.; Afsarmanesh, H.; Aboutajdine, D.; Skalli, A.; Benchekroun, B.; Artiba, A.

2013-01-01

Service-based enhancement of products represents a growing trend, particularly in the context of complex products. A service-enhanced product can be seen as a market proposition that extends the traditional functionality of a product by incorporating additional business services, which not only

Intelligent products : A survey

NARCIS (Netherlands)

Meyer, G.G.; Främling, K.; Holmström, J.

This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

Making Product Customization Profitable

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

Product Knowledge Modelling and Management

DEFF Research Database (Denmark)

Zhang, Y.; MacCallum, K. J.; Duffy, Alex

1996-01-01

function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

Commercial production of metal hafnium and hafnium-based products

International Nuclear Information System (INIS)

Negodin, D.A.; Shtutsa, M.G.; Akhtonov, S.G.; Il'enko, E.V.; Kobyzev, A.M.

2012-01-01

Hafnium possesses a unique complex of physical and chemical properties which allow the application of products on its basis in various industries. Joint Stock Company 'Chepetsky Mechanical Plant' is the single enterprise which produces hafnium on the territory of Russia. The manufacture of metal hafnium with the total content of zirconium and hafnium, at least, 99,8 % of weights is developed at the present time at Joint Stock Company CHMZ. The weight of melted hafnium ingots is up to 1 ton. Manufacture of wide range of products from hafnium is implemented. The plates from a hafnium with thickness of 0.60 mm which are used for emergency control cartridges of VVER-440 reactors are the most critical product. It is shown that ingots and products obtained from metal hafnium correspond to the Russian and international standards for reactor materials in chemical composition, mechanical and corrosion properties.

Evidence supporting product standards for carcinogens in smokeless tobacco products.

Science.gov (United States)

Hatsukami, Dorothy K; Stepanov, Irina; Severson, Herb; Jensen, Joni A; Lindgren, Bruce R; Horn, Kimberly; Khariwala, Samir S; Martin, Julia; Carmella, Steven G; Murphy, Sharon E; Hecht, Stephen S

2015-01-01

Smokeless tobacco products sold in the United States vary significantly in yields of nicotine and tobacco-specific nitrosamines (TSNA). With the passage of the Family Smoking Prevention and Tobacco Control Act, the Food and Drug Administration now has the authority to establish product standards. However, limited data exist determining the relative roles of pattern of smokeless tobacco use versus constituent levels in the smokeless tobacco product in exposure of users to carcinogens. In this study, smokeless tobacco users of brands varying in nicotine and TSNA content were recruited from three different regions in the U.S. Participants underwent two assessment sessions. During these sessions, demographic and smokeless tobacco use history information along with urine samples to assess biomarkers of exposure and effect were collected. During the time between data collection, smokeless tobacco users recorded the amount and duration of smokeless tobacco use on a daily basis using their diary cards. Results showed that independent of pattern of smokeless tobacco use and nicotine yields, levels of TSNA in smokeless tobacco products played a significant role in carcinogen exposure levels. Product standards for reducing levels of TSNA in smokeless tobacco products are necessary to decrease exposure to these toxicants and potentially to reduce risk for cancer. ©2014 American Association for Cancer Research.

Side-stream products of edible oil refining as feedstocks in biodiesel production

Directory of Open Access Journals (Sweden)

Cvetković Bojan S.

2016-01-01

Full Text Available Biodiesel, a diesel fuel alternative, is produced from vegetable oils and animal fats by the transesterification reaction of triacylglycerols and lower aliphatic alcohols. Beside number advantages related to fossil fuels, the main barrier to biodiesel wider commercial use is the high price of edible oils. Recently, the special attention was given to side-stream products of edible oil refining as low-cost triacylglycerol sources for biodiesel production because of their positive economic and ecological effects. In this paper, the different procedures for biodiesel production from side-stream refining products such as soapstock, spent bleaching earth and deodorizer distillate were analyzed. The main goal of this paper is to analyze the possibilities for reusing the by-products of edible oil refinement in the biodiesel production.

The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

Directory of Open Access Journals (Sweden)

Babatunde O. Alao

2017-06-01

Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

Product Seeding: Word-of-Mouth Effects For and Beyond the Focal Product

Directory of Open Access Journals (Sweden)

Bart Yakov

2017-11-01

Full Text Available In a classic seeded WOM marketing campaign, a company sends product samples to a selected group of influencers, and encourages them share the product information and their own opinions with other consumers. Positive effects include more WOM for the focal product in the target segment, but also in additional segments. But there are additional spillover effects on the brand and the product category level and they are negative. More conversations about the focal product reduced the “off-topic” conversations about other brands in the same category as well as other products of the same brand. These negative brand and category spillover effects are stronger when the focal product is of a more functional nature. Marketers tend to consider only positive spillovers to be beneficial for a company, but negative spillovers should not be immediately classified as “bad news.” There are upsides to this effect that managers can use in their favor.

Influence of dispatching rules on average production lead time for multi-stage production systems.

Science.gov (United States)

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Confronting product life thinking with product life cycle analysis

DEFF Research Database (Denmark)

McAloone, Tim C.

2001-01-01

to "read" the environment out of the product, in order to systematically, quickly and efficiently come to some design recommendations for the company. The phrases "LCA" and "product life thinking" will be described and differentiated and a pattern identified for their cooperative effect in use....

Software product quality measurement

OpenAIRE

Godliauskas, Eimantas

2016-01-01

This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

Play as production – production as game?

DEFF Research Database (Denmark)

Eichberg, Henning

2015-01-01

Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

Animal Production Research Advances

African Journals Online (AJOL)

Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

Accounting for productivity

DEFF Research Database (Denmark)

Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

2009-01-01

The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

Measuring Clinical Productivity.

Science.gov (United States)

Hudson, Mark E; Lebovitz, Evan E

2018-06-01

Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

Smokeless tobacco products harbor diverse bacterial microbiota that differ across products and brands.

Science.gov (United States)

Smyth, Eoghan M; Kulkarni, Prachi; Claye, Emma; Stanfill, Stephen; Tyx, Robert; Maddox, Cynthia; Mongodin, Emmanuel F; Sapkota, Amy R

2017-07-01

Smokeless tobacco products contain numerous chemical compounds, including known human carcinogens. Other smokeless tobacco constituents, including bacteria, may also contribute to adverse health effects among smokeless tobacco users. However, there is a lack of data regarding the microbial constituents of smokeless tobacco. Our goal was to characterize the bacterial microbiota of different smokeless tobacco products and evaluate differences across product types and brands. DNA was extracted from 15 brands of smokeless tobacco products (including dry snuff, moist snuff, snus, and Swedish snus) and 6 handmade products (e.g., toombak) using an enzymatic and mechanical lysis approach. Bacterial community profiling was performed using PCR amplification of the V1-V2 hypervariable region of the 16S rRNA gene, followed by 454 pyrosequencing of the resulting amplicons and sequence analysis using the QIIME package. Total viable counts were also determined to estimate the number of viable bacteria present in each product. Average total viable counts ranged from 0 to 9.35 × 10 7  CFU g -1 . Analysis of the 16S rRNA gene sequences revealed high bacterial diversity across the majority of products tested: dry snuff products where characterized by the highest diversity indices compared to other products. The most dominant bacterial phyla across all products were Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes. Significant differences in both bacterial community composition and in silico predicted gene content were observed between smokeless tobacco product types and between brands of specific smokeless tobacco products. These data are useful in order to comprehensively address potential health risks associated with the use of smokeless tobacco products.

Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

Science.gov (United States)

Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2014-01-01

Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Device to irradiate agricultural product on the production site, after harvesting

International Nuclear Information System (INIS)

Jegu, Jean; Palomo, Georges; Blaive, Daniel.

1982-01-01

The invention concerns a device to irradiate agricultural product on the production site, after harvesting. It includes an outer shielding to absorb the radiations and containers in which the products are placed for irradiation. The shielding is rotationally symmetrical around a vertical axis and holds an irradiation chamber containing a radioactive bar fitted along the shielding axis. The cylindrical containers are placed around the chamber with their axes parallel to the axis of the shielding. They are set in rotation by a motor and receive the farm products through their top ends which communicate with a supply system. Their bottom ends are closed by shutters covering a means for evacuating the products. The invention applies in particular to the irradiation of newly dug potatoes to avoid germination [fr

Modelling of virtual production networks

Directory of Open Access Journals (Sweden)

2011-03-01

Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

Antiproton production

International Nuclear Information System (INIS)

Allaby, J.V.

1984-01-01

The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

Chlorhexidine in cosmetic products

DEFF Research Database (Denmark)

Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

2015-01-01

or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

From Sentence Production to Text Production: Investigating Fundamental Processes.

Science.gov (United States)

Fayol, Michel

1991-01-01

Presents a review of cognitive psychology research dealing with the organization and functioning of oral and written language production mechanisms. Discusses works dealing with the microstructural aspects of language, primarily oral production. Describes how the research perspective has evolved from modular to connectionist models. Examines the…

Production and Productivity Effects of Informal Contract Farming in ...

African Journals Online (AJOL)

This paper uses data from a 2001 household survey of small-scale farming households in Kirinyaga District, Kenya to explore production effects of informal credit contracts in French bean farming where formal markets for surplus production are seemingly shallow and imperfect. Specifically, it examines whether informal ...

Product sounds : Fundamentals and application

NARCIS (Netherlands)

Ozcan-Vieira, E.

2008-01-01

Products are ubiquitous, so are the sounds emitted by products. Product sounds influence our reasoning, emotional state, purchase decisions, preference, and expectations regarding the product and the product's performance. Thus, auditory experience elicited by product sounds may not be just about

75 FR 33814 - Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee...

Science.gov (United States)

2010-06-15

...] Tobacco Product Constituents Subcommittee of the Tobacco Products Scientific Advisory Committee; Notice of... to the public. Name of Committee: Tobacco Product Constituents Subcommittee of the Tobacco Products...-8900. Contact Person: Karen Templeton-Somers, Office of Science, Center for Tobacco Products, Food and...

K-shell-hole production, multiple-hole production, charge transfer, and antisymmetry

International Nuclear Information System (INIS)

Reading, J.F.; Ford, A.L.

1980-01-01

In calculating K-shell-hole production when an ion collides with an atom, account must be taken of the fact that processes involving electrons other than the K-shell electron can occur. For example, after making a K-shell hole an L-shell electron may be knocked into it, or an L-shell vacancy may be produced and the K-shell electron promoted to that vacancy in the ''Fermi sea'' of the target-atom orbitals. In 1973 a theorem was proved by one of the present authors demonstrating that all these multielectron processes cancel in an independent-particle model for the target atom. In this paper it is shown that the same thing occurs for hole production by charge transfer to the ion. The authors demonstrate that multihole production does not obey this simple rule and that the probability for multihole production is not the product of independent single-electron probabilities. The correct expressions that should be used for these processes are given, together with new results for charge-transfer processes accompanied by hole production

Determination of impurities and degradation products from veterinary medicinal products by HPLC method

Directory of Open Access Journals (Sweden)

Elena Gabriela Oltean

2014-06-01

Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

Design, production and materials of PV powered consumer products - the case of mass production (cd-rom)

NARCIS (Netherlands)

Reinders, Angelina H.M.E.; Akkerman, Remko; Palz, W.; Ossenbrink, H.; Helm, P.

2005-01-01

Though many options exist, the application of integrated PV systems in mass produced consumer products is still unusual and rare [1]. Therefore, to date, design and manufacturing aspects of product-integrated PV systems have been explored only to a very limited extent. The requirements for the

The productivity and work load in flexible production systems

NARCIS (Netherlands)

Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

2006-01-01

A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

Interface between the production plan and the master production schedule in assembly environments

OpenAIRE

Moya Navarro, Marcos; Sánchez Brenes, Magaly

2012-01-01

In a production environment there is a direct relationship between the market and the manufacturing process of goods.When production is immersed in an assembly environment, the process of production planning and scheduling becomes complex, and the enterprises have the risk of losing competitive advantages in terms of not meeting delivery dates and production high costs. Linear programming has become an appropriate tool for production planning and scheduling in complex manufacturing environmen...

9 CFR 319.761 - Potted meat food product and deviled meat food product.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Potted meat food product and deviled meat food product. 319.761 Section 319.761 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY...

Multi-Product Crops for Agricultural and Energy Production : an AGE Analysis for Poland

NARCIS (Netherlands)

Ignaciuk, A.; Dellink, R.B.

2005-01-01

By-products from agriculture and forestry can contribute to production of clean and cheap (bio)electricity. To assess the role of such multi-product crops in the response to climate policies, we present an applied general equilibrium model with special attention to biomass and multi-product crops

Seeds of Cross-Media Production

DEFF Research Database (Denmark)

Bødker, Susanne; Petersen, Anja Bechmann

2007-01-01

separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... with planning and coordination. We demonstrate how the production rhythms of the individual media collide with that of cross-media, and how product lifecycle rhythms add to the list of causes of problems that may jeopardize crossmedia production. We propose to strengthen planning and overview support elements...

Volatile products controlling Titan's tholins production

KAUST Repository

Carrasco, Nathalie

2012-05-01

A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

Product Placement in Cartoons

Directory of Open Access Journals (Sweden)

Irena Oroz Štancl

2014-06-01

Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

Productivity and energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

1995-12-31

Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products

Directory of Open Access Journals (Sweden)

Mladenović Dragana D.

2016-01-01

Full Text Available In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially good raw material for production other valuable products, such as bioethanol, biogas, biodiesel, organic acids, enzymes, microbial biomass, etc. Since the first industrial production to the present, lactic acid has found wide application in food, cosmetic, pharmaceutical and chemical industries. In recent years, the demand for lactic acid has been increasing considerably owing to its potential use as a monomer for the production of poly-lactic acid (PLA polymers which are biodegradable and biocompatible with wide applications. Waste and industrial by-products such are whey, molasses, stillage, waste starch and lignocellulosic materials are a good source of fermentable sugars and many other substances of great importance for the growth of microorganisms, such as proteins, minerals and vitamins. Utilization of waste products for production of lactic acid could help to reduce the total cost of lactic acid production and except the economic viability of the process offers a solution of their disposal. Fermentation process depends on chemical and physical nature of feedstocks and the lactic acid producer. This review describes the characteristics, abilities and limits of microorganisms involved in lactic acid production, as well as the characteristics and types of waste products for lactic acid production. The fermentation methods that have been recently reported to improve lactic acid production are summarized and compared. In order to improve processes and productivity, fed-batch fermentation, fermentation with immobilized cell systems and mixed cultures and opportunities of open (non-sterilized fermentation have been investigated.

Sustainable production of wood and non-wood forest products

Science.gov (United States)

Ellen M. Donoghue; Gary L. Benson; James L. Chamberlain

2003-01-01

The International Union of Forest Research Organizations (IUFRO) All Divisions 5 Conference in Rotorua, New Zealand, March 11-15, 2003, focused on issues surrounding sustainable foest management and forest products research. As the conference title "Forest Products Research: Providing for Sustainable Choices" suggests, the purpose of the conference was to...

Evolving production network structures

DEFF Research Database (Denmark)

Grunow, Martin; Gunther, H.O.; Burdenik, H.

2007-01-01

When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

Possibilities of utilization of co-products from corn grain ethanol and starch production

Directory of Open Access Journals (Sweden)

Semenčenko Valentina V.

2013-01-01

Full Text Available In recent decades, the expansion of alternative fuels production from crops traditionally used for food and animal feed has led to significant changes in the field of energy production, agriculture and food industry. Starch and sugar feedstocks for ethanol production (corn, wheat, sugar beet, sugar cane, etc. require increasing arable land to meet market demands for the biofuel production. Although intensive studies are being carried out in order to identify improved and more cost-effective methods for the utilization of lignocellulosic and communal waste in the production of alcohol fuel, the possibility of using dry distillers’ grains with solubles (DDGS, by-product of bioethanol production from corn and wheat as well as alcoholic beverages industry, is now in focus. Application of DDGS in livestock and poultry diets in concentrations greater than traditional could positively affect the economic viability of this biofuel production, but also stabilize the current imbalance in the food and animal feed market. However, DDGS feedstuff should not be treated as a perfect substitute for corn because the complexity of ration formulation determined at the farm or feedlot level is driven by energy and protein and other nutrient requirements, as well as their relative costs in the ration. Nevertheless, processing of corn by wet milling provides a multitude of co-products suitable for feedstuffs, food industry, pharmaceuticals, chemistry etc. Some of the most important wet milling co-products that have their use in feedstuffs are corn gluten feed and corn gluten meal. The use of DDGS as a substitute for traditional feed could prevent indirect land-use changes associated with biofuel production, and therefore preserve the environmental destruction by saving the forests and permanent pastures. The use of distiller’s grains can be beneficial to biofuel growth as this is an additional, the second largest, source of income accounting of 10-20% total

25 CFR 309.6 - When does a commercial product become an Indian product?

Science.gov (United States)

2010-04-01

...? 309.6 Section 309.6 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR PROTECTION OF INDIAN ARTS AND CRAFTS PRODUCTS § 309.6 When does a commercial product become an Indian product? In addressing Indian embellishments to originally commercial products, the Indian labor expended to add art or...

Fermentative production of isobutene.

Science.gov (United States)

van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

2012-02-01

Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

Product prioritization in a two-stage food production system with intermediate storage

NARCIS (Netherlands)

Akkerman, R.; van Donk, D.P.

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the

Modernity Evaluation of the Machines Used During Production Process of Metal Products

OpenAIRE

Ingaldi, Manuela; Dziuba, Szymon T.

2015-01-01

Most manufacturing companies realize its technologies, implemented through concrete machinery parts. They differ in terms of importance, the relevance of their selection and the level of their modernity. Modernity and efficiency of the machine are also very important during production process of the metal products. They have an influence on the quality of these products. The purpose of this article is to analyse the chosen production machine (CNC machine AFE-3D8-T) used during pro...

Product Structuring, an overview

DEFF Research Database (Denmark)

Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

1997-01-01

.In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

The impact of new product introduction on plant productivity in the North American automotive industry

NARCIS (Netherlands)

Gopal, A.; Goyal, M.; Netessine, S.; Reindorp, M.J.

2013-01-01

Product launch—an event when a new product debuts for production in a plant—is an important phase in product development. But launches disrupt manufacturing operations, resulting in productivity losses. Using data from North American automotive plants from years 1999–2007, we estimate that a product

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Heuristics for the Economic Production Quantity Problem under Restrictions on Production and Maintenance Time

Directory of Open Access Journals (Sweden)

Qi Xu

2016-01-01

Full Text Available This paper proposes an economic production quantity problem with the maximal production run time and minimal preventive maintenance time over a finite planning horizon. The objective is to find the efficient production and maintenance policy to minimize the total cost composed of production, maintenance, shortages, and holding costs under the restriction on the production run time and the preventive maintenance time. The production and maintenance decisions include the production and maintenance frequencies and the production run and the maintenance time. The variability and the boundedness of the production run and maintenance time make the problem difficult to solve. Two heuristic algorithms are developed using different techniques based on the optimal properties of the relaxed problem. The performance comparison between the two algorithms is illustrated by numerical examples. The numerical results show that, for the most part, there exists a heuristic algorithm which is more effective than the other.

Advances in chemical product design

DEFF Research Database (Denmark)

Zhang, Lei; Fung, Ka Yip; Wibowo, Christianto

2018-01-01

The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products. This arti......The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products....... This article provides an overview of chemical product design with a multidisciplinary hierarchical framework including all the design issues and tasks. Each of the design issues and tasks are introduced and discussed, methods and tools are summarized and compared, challenges and perspectives are presented...... to help the chemical product design researchers on finding more novel, innovative and sustainable products, by the combined effort from academia and industry to develop a systematic generic framework, and tools including product simulator, process simulator, database manager, modeling tool, and templates...

Microbiological Spoilage of Cereal Products

Science.gov (United States)

Cook, Frederick K.; Johnson, Billie L.

A wide range of cereal products, including bakery items, refrigerated dough, fresh pasta products, dried cereal products, snack foods, and bakery mixes, are manufactured for food consumption. These products are subject to physical, chemical, and microbiological spoilage that affects the taste, aroma, leavening, appearance, and overall quality of the end consumer product. Microorganisms are ubiquitous in nature and have the potential for causing food spoilage and foodborne disease. However, compared to other categories of food products, bakery products rarely cause food poisoning. The heat that is applied during baking or frying usually eliminates pathogenic and spoilage microorganisms, and low moisture contributes to product stability. Nevertheless, microbiological spoilage of these products occurs, resulting in substantial economic losses.

Strategies of Production Control as Tools of Efficient Management of Production Enterprises

Science.gov (United States)

Budynek, Mateusz; Celińska, Elżbieta; Dybikowska, Adrianna; Kozak, Monika; Ratajczak, Joanna; Urban, Jagoda; Materne, Karolina

2016-03-01

The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits resulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

National pulpwood production, 2010

Science.gov (United States)

Ronald J. Piva; James W. Bentley; Steven W. Hayes

2014-01-01

U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

Consumer Product Category Database

Science.gov (United States)

The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

Product Quality and Worker Quality

OpenAIRE

Abowd, John M; Kramarz, Francis

1995-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work-force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group, and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wag...

Product Quality and Worker Quality

OpenAIRE

John M. ABOWD; Françis KRAMARZ; Antoine MOREAU

1996-01-01

We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wage...

Design of resilient consumer products

DEFF Research Database (Denmark)

Haug, Anders

2016-01-01

Consumer product sustainability is a topic that has been of increasing interest to practice and academia in recent decades. In this context, a widely discussed means of achieving sustainability is to design more durable products, thereby reducing the need for the production of new products....... In particular, the emotional perspective on product durability has received attention in recent design literature, since consumer products are often replaced long before they become physically non-functioning. However, the literature does not provide a full account of the causes of product replacement...... for designers to design resilient consumer products and for researchers to engage in further studies....

Low income product innovation

Directory of Open Access Journals (Sweden)

Maria Cecília Sobral

2008-10-01

Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Directory of Open Access Journals (Sweden)

Carol Sze Ki Lin

2013-09-01

Full Text Available The feasibility of using pastry waste as resource for glucoamylase (GA production via solid state fermentation (SSF was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd 2.20 × 10−3minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes.

Production of Fungal Glucoamylase for Glucose Production from Food Waste

Science.gov (United States)

Lam, Wan Chi; Pleissner, Daniel; Lin, Carol Sze Ki

2013-01-01

The feasibility of using pastry waste as resource for glucoamylase (GA) production via solid state fermentation (SSF) was studied. The crude GA extract obtained was used for glucose production from mixed food waste. Our results showed that pastry waste could be used as a sole substrate for GA production. A maximal GA activity of 76.1 ± 6.1 U/mL was obtained at Day 10. The optimal pH and reaction temperature for the crude GA extract for hydrolysis were pH 5.5 and 55 °C, respectively. Under this condition, the half-life of the GA extract was 315.0 minutes with a deactivation constant (kd) 2.20 × 10−3 minutes−1. The application of the crude GA extract for mixed food waste hydrolysis and glucose production was successfully demonstrated. Approximately 53 g glucose was recovered from 100 g of mixed food waste in 1 h under the optimal digestion conditions, highlighting the potential of this approach as an alternative strategy for waste management and sustainable production of glucose applicable as carbon source in many biotechnological processes. PMID:24970186

User's guide: Nimbus-7 Earth radiation budget narrow-field-of-view products. Scene radiance tape products, sorting into angular bins products, and maximum likelihood cloud estimation products

Science.gov (United States)

Kyle, H. Lee; Hucek, Richard R.; Groveman, Brian; Frey, Richard

1990-01-01

The archived Earth radiation budget (ERB) products produced from the Nimbus-7 ERB narrow field-of-view scanner are described. The principal products are broadband outgoing longwave radiation (4.5 to 50 microns), reflected solar radiation (0.2 to 4.8 microns), and the net radiation. Daily and monthly averages are presented on a fixed global equal area (500 sq km), grid for the period May 1979 to May 1980. Two independent algorithms are used to estimate the outgoing fluxes from the observed radiances. The algorithms are described and the results compared. The products are divided into three subsets: the Scene Radiance Tapes (SRT) contain the calibrated radiances; the Sorting into Angular Bins (SAB) tape contains the SAB produced shortwave, longwave, and net radiation products; and the Maximum Likelihood Cloud Estimation (MLCE) tapes contain the MLCE products. The tape formats are described in detail.

Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

Directory of Open Access Journals (Sweden)

Anita Romsdal

2014-07-01

Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

Joint production and corporate pricing: An empirical analysis of joint products in the petroleum industry

International Nuclear Information System (INIS)

Karimnejad, H.

1990-01-01

This dissertation investigates the pricing mechanism of joint products in large multi-plant and multi-product corporations. The primary objective of this dissertation is to show the consistency of classical theories of production with corporate pricing of joint products. This dissertation has two major parts. Part One provides a theoretical framework for joint production and corporate pricing. In this part, joint production is defined and its historical treatment by classical and contemporary economists is analyzed. Part Two conducts an empirical analysis of joint products in the US petroleum industry. Methods of cost allocation are used in the pricing of each individual petroleum product. Three methods are employed to distribute joint production costs to individual petroleum products. These methods are, the sales value method, the barrel gravity method and the average unit cost method. The empirical findings of dissertation provide useful guidelines for pricing policies of large multi-product corporations

Improvement of succinate production by release of end-product inhibition in Corynebacterium glutamicum.

Science.gov (United States)

Chung, Soon-Chun; Park, Joon-Song; Yun, Jiae; Park, Jin Hwan

2017-03-01

Succinate is a renewable-based platform chemical that may be used to produce a wide range of chemicals including 1,4-butanediol, tetrahydrofurane, and γ-butyrolactone. However, industrial fermentation of organic acids is often subject to end-product inhibition, which significantly retards cell growth and limits metabolic activities and final productivity. In this study, we report the development of metabolically engineered Corynebacterium glutamicum for high production of succinate by release of end-product inhibition coupled with an increase of key metabolic flux. It was found that the rates of glucose consumption and succinate production were significantly reduced by extracellular succinate in an engineered strain, S003. To understand the mechanism underlying the inhibition by succinate, comparative transcriptome analysis was performed. Among the downregulated genes, overexpression of the NCgl0275 gene was found to suppress the inhibition of glucose consumption and succinate production, resulting in a 37.7% increase in succinate production up to 55.4g/L in fed-batch fermentation. Further improvement was achieved by increasing the metabolic flux from PEP to OAA. The final engineered strain was able to produce 152.2g/L succinate, the highest production reported to date, with a yield of 1.1g/g glucose under anaerobic condition. These results suggest that the release of end-product inhibition coupled with an increase in key metabolic flux is a promising strategy for enhancing production of succinate. Copyright © 2017. Published by Elsevier Inc.

RELEVANT DIRECTIONS FOR THE PRODUCTION OF COMPETITIVE CONSTRUCTION PRODUCTS ON THE BASIS OF INNOVATION

Directory of Open Access Journals (Sweden)

T. Yu. Levitskiy

2017-01-01

Full Text Available Objectives. The article substantiates the necessity for competitive innovative high-tech construction products at the present stage of modernisation of the construction industry and reveals some peculiarities of their manufacture.Methods. In the course of the research, a programme-targeted method was applied, underlying the development of a programme for the innovative development of construction production.Results. Relevant directions of innovative development of construction production are systematised. The world's application experience of a technical regulation parametric model for construction industry product manufacturing is generalised. In order to increase the level of innovative activity of construction organisations, a set of practical measures is proposed whose implementation will ensure the output of competitive building products to the market.Conclusion. Increasing the competitiveness of construction products is closely connected with the activation of innovative processes: the introduction of high technology (including resource-saving into production processes and the expansion of the output of innovative products with the best consumer properties capable of successfully competing on the market with foreign counterparts in the context of import substitution strategies. The modernisation of the construction industry on the basis of introduction of hightech production methods specifies new requirements to the professional competencies of personnel producing competitive building products. To solve the set problems, a tool for improving the management mechanism of the innovative activity of construction organisations was proposed, ensuring the integration of institutional and production conditions for the large-scale development of advanced technologies and production of science-intensive types of construction products. 

Production of RVNRL and manufacture of products from it

International Nuclear Information System (INIS)

Vijayakumar, K.C.; Jacob, J.

1996-01-01

The procedure of the trial irradiation of latex at the pilot plant are discussed. Factory influencing the quality of RVNRL during trial production are identified. Procedure for processing of radiation prevulcanised latex into end products has been standardised. Household gloves, industrial gloves, to), balloons, blood transfusion tubes and nipples are manufactured commercially from RVNRL produced at Rubber Board

A simple approximation of productivity scores of fuzzy production plans

DEFF Research Database (Denmark)

Hougaard, Jens Leth

2005-01-01

This paper suggests a simple approximation procedure for the assessment of productivity scores with respect to fuzzy production plans. The procedure has a clear economic interpretation and all the necessary calculations can be performed in a spreadsheet making it highly operational...

Evolving Product Information in Aligning Product Development Decisions across Disciplines

NARCIS (Netherlands)

Oude Luttikhuis, Ellen; de Lange, Jos; Lutters, Diederick; ten Klooster, Roland

2015-01-01

Today's product development is fragmented across various disciplines all with their own fields of expertise. Maintaining overview in consequences and implications of decisions is difficult, since many stakeholders are involved. To optimise the product development, many methods are developed based on

Glutamic acid production from wheat by-products using enzymatic and acid hydrolysis

NARCIS (Netherlands)

Sari, Y.W.; Alting, A.C.; Floris, R.; Sanders, J.P.M.; Bruins, M.E.

2014-01-01

Glutamic acid (Glu) has potential as feedstock for bulk chemicals production. It has also been listed as one of the top twelve chemicals derived from biomass. Large amounts of cheaper Glu can be made available by enabling its production from biomass by-products, such as wheat dried distillers grains

STRATEGIES OF PRODUCTION CONTROL AS TOOLS OF EFFICIENT MANAGEMENT OF PRODUCTION ENTERPRISES

Directory of Open Access Journals (Sweden)

Mateusz BUDYNEK

2016-01-01

Full Text Available The paper discusses the problem of principle methods of production control as a strategy supporting the production system and stimulating efficient solutions in respect management in production enterprises. The article describes MRP, ERP, JIT, KANBAN and TOC methods and focuses on their main goals, principles of functioning as well as benefits re-sulting from their application. The methods represent two diverse strategies of production control, i.e. pull and push strategies. Push strategies are used when the plans apply to the first and principle part of production and are based on the demand forecasts. Pull strategies are used when all planning decisions apply to the final stage and depend on the actual demand or orders from customers.

Industrial production of products like petroleum

Energy Technology Data Exchange (ETDEWEB)

Baurier, P J.H.

1925-02-25

This invention has as its object a process for separating tars, oils, or gases coming from the distillation of carbonaceous materials, such as lignities or shales, to separate all other substances of the same kind and to prepare products like petroleum. The process for present consideration consists essentially in achieving simultaneously hydrogenation of the material (treated for conversion to stable products) and desulfurization of the materials showing the following characteristics: The substances to be treated are fed in the gaseous state, as vapors or pulverized and made to react at a temperature of 300 to 450/sup 0/C in the presence of excess water vapor, on divided metals capable of decomposing the water with release of hydrogen, at a temperature below 450/sup 0/C.

Towards Sustainable Consumption and Production

DEFF Research Database (Denmark)

Ulku, M. Ali; Hsuan, Juliana

2017-01-01

an environmentally conscious (green) consumer who will buy one of two available, horizontally differentiated products: a modular product (M) manufactured by Firm M or a standard product (S) manufactured by Firm S. Firm M can take advantage of its modular production technology and product return policy...... and numerical examples to render practical insights: The refund rate has a strong impact on profits; sensitivity of product greenness can be increased by conscientious advertising, and the reusability of modular parts encourages lower pricing and higher market share. We assert that modularity is a strong...... concept and practice in developing sustainable products and thereby in production, which, in turn, may enhance sustainable consumption. This study's findings have direct implications for reverse supply chain management, and firms should take these findings into account early in the product design phase....

Tobacco and Nicotine Product Testing

Science.gov (United States)

Biener, Lois; Leischow, Scott J.; Zeller, Mitch R.

2012-01-01

Introduction: Tobacco product testing is a critical component of the Family Smoking Prevention and Tobacco Control Act (FSPTCA), which grants the Food and Drug Administration the authority to regulate tobacco products. The availability of methods and measures that can provide accurate data on the relative health risks across types of tobacco products, brands, and subbrands of tobacco products on the validity of any health claims associated with a product, and on how consumers perceive information on products toxicity or risks is crucial for making decisions on the product's potential impact on public health. These tools are also necessary for making assessments of the impact of new indications for medicinal products (other than cessation) but more importantly of tobacco products that may in the future be marketed as cessation tools. Objective: To identify research opportunities to develop empirically based and comprehensive methods and measures for testing tobacco and other nicotine-containing products so that the best science is available when decisions are made about products or policies. Methods: Literature was reviewed to address sections of the FSPTCA relevant to tobacco product evaluation; research questions were generated and then reviewed by a committee of research experts. Results: A research agenda was developed for tobacco product evaluation in the general areas of toxicity and health risks, abuse liability, consumer perception, and population effects. Conclusion: A cohesive, systematic, and comprehensive assessment of tobacco products is important and will require building consensus and addressing some crucial research questions. PMID:21460383

National pulpwood production, 2008

Science.gov (United States)

Tony G. Johnson; Ronald J. Piva; Brian F. Walters; al. et.

2011-01-01

United States’ pulpwood production amounted to 89.2 million cords in 2008. Roundwood production totaled 63.0 million cords and accounted for 71 percent of the Nation’s total pulpwood production. The use of wood residue totaled 26.2 million cords. Georgia led the Nation in total production, with 11.6 million cords. In 2008, 146 mills were operating and drawing wood from...

Southern pulpwood production, 2007

Science.gov (United States)

Tony G. Johnson; Carolyn D. Steppleton; James w. Bentley

2009-01-01

The South’s production of pulpwood increased from 64.7 million cords in 2006 to 65.7 million cords in 2007. Roundwood production increased 1.2 million cords to 47.6 million cords and accounted for 72 percent of the total pulpwood production. The use of wood residue declined 1 percent to 18.2 million cords. Alabama led the South in total production at 10.6 million cords...

SIMULATION AS AN APPROPRIATE WAY OF VERIFYING THE EFFICIENCY OF PRODUCTION VARIANTS IN THE DESIGN OF PRODUCTION AND NON-PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Marek Kliment

2014-12-01

Full Text Available The paper deals with simulation and her forms of use in designing of production and non-production systems. Points to the possibility of using software can help in planning and subsequently in other phase of the lifecycle production and products. Article informs about some of the advantages of this type of software and his options. Sets out some theoretical knowledge of simulation and in the practical part presents some frequently used simulation software.

ORGANIC PRODUCTION OF SHEEP MILK

Directory of Open Access Journals (Sweden)

Juan Carlos Ángeles Hernández

2014-04-01

Full Text Available Organic production systems are based on natural processes, leveraging local resources and decreasing in soil degradation. Effectiveness of milk production of organic systems vs. conventional production systems is a subject open to debate. There are various studies in which there is a positive effect of organic systems in relation to the welfare and animal health, product quality and environmental impact. However, some authors report lower milk yields production and increased susceptibility to environmental conditions compared with those obtained in conventional systems. The lower milk yields in organic systems in Dairy sheep's production, are related to the limited nutritional value, low genetic potential, and the changing environmental conditions. These systems are mainly a production method for a specific market with premium quality products and high standards in their production processes. Thus, a company organic Dairy sheep production should be considered viable when present a positive global sustainability level, that is socially beneficial, economically viable and environmentally responsible.

75 FR 33312 - Indexing Structured Product Labeling for Human Prescription Drug and Biological Products; Request...

Science.gov (United States)

2010-06-11

...] Indexing Structured Product Labeling for Human Prescription Drug and Biological Products; Request for... Biologics Evaluation and Research (CBER) are indexing certain categories of information in product labeling for use as terms to search repositories of approved prescription medical product structured product...

Utilization of oleo-chemical industry by-products for biosurfactant production

Science.gov (United States)

2013-01-01

Biosurfactants are the surface active compounds produced by micro-organisms. The eco-friendly and biodegradable nature of biosurfactants makes their usage more advantageous over chemical surfactants. Biosurfactants encompass the properties of dropping surface tension, stabilizing emulsions, promoting foaming and are usually non- toxic and biodegradable. Biosurfactants offer advantages over their synthetic counterparts in many applications ranging from environmental, food, and biomedical, cosmetic and pharmaceutical industries. The important environmental applications of biosurfactants include bioremediation and dispersion of oil spills, enhanced oil recovery and transfer of crude oil. The emphasis of present review shall be with reference to the commercial production, current developments and future perspectives of a variety of approaches of biosurfactant production from the micro-organisms isolated from various oil- contaminated sites and from the by-products of oleo-chemical industry wastes/ by-products viz. used edible oil, industrial residues, acid oil, deodorizer distillate, soap-stock etc. PMID:24262384

Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

Directory of Open Access Journals (Sweden)

C. Raineri

2015-08-01

Full Text Available Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i costs composition, and ii cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

About productive force and labour productivity (questions of the theory and practice

Directory of Open Access Journals (Sweden)

Kulik V.I.

2018-03-01

Full Text Available the authors consider two intermediaries: the intermediary between the world of the nature and the person – means of work or "fixed capital" of a society as productive force of social activities, and the intermediary inside a society – cost in the form of money without what it is impossible to define labour productivity and structural transformations in a society. The article gives engineering understanding of productive force and productivity of the process equipment by the example of calculation and a choice of the automatic transfer line.

Oil production system

Energy Technology Data Exchange (ETDEWEB)

Ballantyne, J F

1983-12-21

A new oil producing system is proposed which consists of a group of underwater wells, an underwater riser and a floating storage facility for the production of the wells. The group of wells and the riser are interconnected through a manifold system in such a way that the production from any well or from the entire group of wells go to the base (foundation) of the riser. From above the riser is connected with the floating storage facility which is equipped, besides tanks for storing the well products, with a separation device for separating the oil and the accompanying gas. The gas is used as a fuel for producing electric power required by the dynamic positioning systems. The products from each well are tested by means of a regulable coupling controlled by means of a cable, which is passed from the surface through the riser. The wellhead equipment for the unslanted wells is mounted on a template previously installed on the sea floor. From the template the well products enter the riser through the manifold unit system.

Alcohol-flavoured tobacco products.

Science.gov (United States)

Jackler, Robert K; VanWinkle, Callie K; Bumanlag, Isabela M; Ramamurthi, Divya

2018-05-01

In 2009, the Food and Drug Administration (FDA) banned characterising flavours in cigarettes (except for menthol) due to their appeal to teen starter smokers. In August 2016, the agency deemed all tobacco products to be under its authority and a more comprehensive flavour ban is under consideration. To determine the scope and scale of alcohol-flavoured tobacco products among cigars & cigarillos, hookahs and electronic cigarettes (e-cigarettes). Alcohol-flavoured tobacco products were identified by online search of tobacco purveyors' product lines and via Google search cross-referencing the various tobacco product types versus a list of alcoholic beverage flavours (eg, wine, beer, appletini, margarita). 48 types of alcohol-flavoured tobacco products marketed by 409 tobacco brands were identified. Alcohol flavours included mixed drinks (n=25), spirits (11), liqueurs (7) and wine/beer (5). Sweet and fruity tropical mixed drink flavours were marketed by the most brands: piña colada (96), mojito (66) and margarita (50). Wine flavours were common with 104 brands. Among the tobacco product categories, brands offering alcohol-flavoured e-cigarettes (280) were most numerous, but alcohol-flavoured products were also marketed by cigars & cigarillos (88) and hookah brands (41). Brands by major tobacco companies (eg, Philip Morris, Imperial Tobacco) were well represented among alcohol-flavoured cigars & cigarillos with five companies offering a total of 17 brands. The widespread availability of alcohol-flavoured tobacco products illustrates the need to regulate characterising flavours on all tobacco products. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

DESIGN VERSUS PRODUCT DEVELOPMENT?

Directory of Open Access Journals (Sweden)

Edu Grieco Mazzini Junior

2015-03-01

Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

Animal Product Safety Information

Science.gov (United States)

... Home Animal & Veterinary Safety & Health Product Safety Information Product Safety Information Share Tweet Linkedin Pin it More ... to report adverse experiences with veterinary drugs. Additional Product Information Questions and Answers: Evanger’s Dog and Cat ...

Vector Production in an Academic Environment: A Tool to Assess Production Costs

Science.gov (United States)

Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

2013-01-01

Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

Current status of production and market of human vaccine products in Korea.

Science.gov (United States)

Kim, So Youn; Cho, Jahyang; Cha, Sung-Ho; Bae, Chong-Woo

2013-07-01

The goal of this study was to build basic information related to the production and market of human vaccine products in Korea, which can be an important indicator to provide basic data in practical use. Statistical data were obtained from the Bank of Korea, Korea Health Industry Development Institute, Korea Pharmaceutical Traders Association, and Korea Pharmaceutical Manufacturers Association. Vaccines are the 10th ranked drugs in the classification of whole complete preparated drugs. The production output of vaccines in Korea was 392.2 billion KRW in 2011, comprising 2.83% of complete preparated drug production output (13 trillion 880.8 billion KRW) and 2.54% of medical-pharmaceutical product output (15 trillion 440.3 billion KRW). The market scale of vaccines in Korea was 710 billion KRW in 2011, with an annual average growth rate of 11% in the past 6 years, comprising 2% of vaccine market in the world. There was also a significant increase in essential vaccines and other preventive vaccines in a global scale. Vaccines have the potential of becoming an emerging attractive industry. Based on the current analysis about the production of vaccine products and market scale, further development of the vaccine industry is expected in Korea.

Product Context Analysis with Twitter Data

OpenAIRE

Sun, Tao

2016-01-01

Context. For the product manager, the product context analysis, which aims to align their products to the market needs, is very important. By understanding the market needs, the product manager knows the product context information about the environment the products conceived and the business the products take place. The product context analysis using the product context information helps the product manager find the accurate position of his/her products and support the decision-making of the...

Production measurements at LHCb

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00392425

2017-01-01

The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

Seeds of Cross-Media Production

DEFF Research Database (Denmark)

Bødker, Susanne; Petersen, Anja Bechmann

2007-01-01

We present an empirical study of an organization that has recently moved from traditional newspaper production towards cross-media production involving the integrated digital production of newspaper, television, radio and web-news. The paper focuses on the daily production rhythms of the media...... separately and of cross-media production. Since cross-media production is in the making, we study the instruments currently used for planning and coordination, and analyze them as seeds that will eventually make cross-media production happen. Time and timing are important in news production in general......, and our analyses focus on the rhythm of the daily planning, coordination and production processes. Specifically, we analyze the temporal coordination of the activities in and around the Superdesk – the current center of coordination of the news organization, and of the persons who work specifically...

New advances in the integrated management of food processing by-products in Europe: sustainable exploitation of fruit and cereal processing by-products with the production of new food products (NAMASTE EU).

Science.gov (United States)

Fava, Fabio; Zanaroli, Giulio; Vannini, Lucia; Guerzoni, Elisabetta; Bordoni, Alessandra; Viaggi, Davide; Robertson, Jim; Waldron, Keith; Bald, Carlos; Esturo, Aintzane; Talens, Clara; Tueros, Itziar; Cebrián, Marta; Sebők, András; Kuti, Tunde; Broeze, Jan; Macias, Marta; Brendle, Hans-Georg

2013-09-25

By-products generated every year by the European fruit and cereal processing industry currently exceed several million tons. They are disposed of mainly through landfills and thus are largely unexploited sources of several valuable biobased compounds potentially profitable in the formulation of novel food products. The opportunity to design novel strategies to turn them into added value products and food ingredients via novel and sustainable processes is the main target of recently EC-funded FP7 project NAMASTE-EU. NAMASTE-EU aims at developing new laboratory-scale protocols and processes for the exploitation of citrus processing by-products and wheat bran surpluses via the production of ingredients useful for the formulation of new beverage and food products. Among the main results achieved in the first two years of the project, there are the development and assessment of procedures for the selection, stabilization and the physical/biological treatment of citrus and wheat processing by-products, the obtainment and recovery of some bioactive molecules and ingredients and the development of procedures for assessing the quality of the obtained ingredients and for their exploitation in the preparation of new food products. Copyright © 2013 Elsevier B.V. All rights reserved.

Matching food service products to consumer demands through product development alliances and modularisation

DEFF Research Database (Denmark)

Olsen, Johanne Rønnow

2009-01-01

of product development managers (with the main themes food trends, meal solutions and product development alliances), as well as data from sensory studies of interactions between meal components. Apart from the quality cycle mentioned above, the research has generated the tools listed below to be applied......, more specifically, meal solutions. The results of this research contribute to the knowledge base on product development in the food industry, mainly regarding quality, product development alliances and modularisation,and fill several gaps in the literature. Future research should focus on further...... in the composition of meal solutions and, therefore cannot control all processing steps and interactions with other meal components. In this project, it is proposed that cooperation between food producers on product development (product development alliances) in relation to meal solutions can improve the quality...

Institutionalising cleaner production in China: the cleaner production promotion law

NARCIS (Netherlands)

Mol, A.P.J.; Liu Yi,

2005-01-01

During the 1990s, cleaner production was introduced in China, in the beginning especially via development aid projects. From 1992 to 1997 the focus was strongly on the introduction of cleaner production methodology, the training of personnel and the implementation of demonstration projects at the

Nordic Noir Production Values

DEFF Research Database (Denmark)

Waade, Anne Marit; Jensen, Pia Majbritt

2013-01-01

In this article the authors argue that Nordic noir constitutes a set of production values utilised and conceptualised to make Danish television series attractive in the international market. The idea of production values is embedded into a media industrial context where market principles of target...... by relating the specific Nordic noir production values present in the two series to changing conditions in Danish television drama production, in particular the internationalisation of DR’s Drama Division....

Developing Product Quality Control for Standardization of Tsetse Mass Production. Working Material

International Nuclear Information System (INIS)

2002-01-01

The recent Pan-African Tsetse and Trypanosomosis Eradication Campaign (PATTEC) provides a mechanism within which SIT will be one of the major components of an integrated areawide approach to the establishment of tsetse fly-free areas. Currently world-wide tsetse production is 1/40 of the projected requirement in 2006. To achieve this objective it is essential that quality control (QC) measures suitable for the expanded production be in place. Therefore, improved QC methodology has become a top priority. Improvements in QC methodology will help to ensure the attainment of these production goals and improve quality of rearing, minimize production costs and generate trained QC and production staff required to successfully produce flies and monitor their quality and suitability for release. The proposed CRP is designed to address these issues.

ESO science data product standard for 1D spectral products

Science.gov (United States)

Micol, Alberto; Arnaboldi, Magda; Delmotte, Nausicaa A. R.; Mascetti, Laura; Retzlaff, Joerg

2016-07-01

The ESO Phase 3 process allows the upload, validation, storage, and publication of reduced data through the ESO Science Archive Facility. Since its introduction, 2 million data products have been archived and published; 80% of them are one-dimensional extracted and calibrated spectra. Central to Phase3 is the ESO science data product standard that defines metadata and data format of any product. This contribution describes the ESO data standard for 1d-spectra, its adoption by the reduction pipelines of selected instrument modes for in-house generation of reduced spectra, the enhanced archive legacy value. Archive usage statistics are provided.

The Effect of Production Planning and Budgeting on Organizational Productivity

Directory of Open Access Journals (Sweden)

Patrick Adebisi Olusegun ADEGBUYI

2010-12-01

Full Text Available Improved productivity and proper organizational structure are desired by most manufacturing outfits within the highly turbulent business environment of Nigeria. With various contributing factors, scientific basis for decision making that will lead to enhanced policies for organizational operations is stronlgy established. Five statistical hypotheses which are influence of education, government policies, planning and organizational output, and production planning/budgeting and technological advancement, propounded in this work were investigated to establish a valid decision basis on a confidence level assumed to be 0.05. The work finally examined the impact of the hypotheses on productivity.

Environmental products

International Nuclear Information System (INIS)

1995-12-01

This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

The safety of fishery products

OpenAIRE

Zugravu Gheorghe, Adrian; Turek Rahoveanu, Maria Magdalena; Turek Rahoveanu, Adrian

2012-01-01

The paper follows two main objectives: to understand consumers' perception and image of fishery products and to identify communication levers in order to improve the perceived image of fishery products. Orientations in terms of communication are product-focused and aim at enhancing the reputation of products, consequently with impact on product consumption. The present research is focused on the fishery products, regardless of their presentation - fresh, frozen or processed. This paper conduc...

Factors controlling Eucalyptus productivity: How water availability and stand structure alter production and carbon allocation

Science.gov (United States)

Michael G. Ryan; Jose Luiz Stape; Dan Binkley; Sebastiao Fonseca; Rodolfo A. Loos; Ernesto N. Takahashi; Claudio R. Silva; Sergio R. Silva; Rodrigo E. Hakamada; Jose Mario Ferreira; Augusto M. N. Lima; Jose Luiz Gava; Fernando P. Leite; Helder B. Andrade; Jacyr M. Alves; Gualter G. C. Silva

2010-01-01

Wood production varies substantially with resource availability, and the variation in wood production can result from several mechanisms: increased photosynthesis, and changes in partitioning of photosynthesis to wood production, belowground flux, foliage production or respiration. An understanding of the mechanistic basis for patterns in wood production...

[Subjectivity, ethics and productivity in post-productive health restructuring].

Science.gov (United States)

Gomes, Doris; Ramos, Flávia Regina Souza

2015-08-01

The scope of this paper is to analyze the ethical problems generated by the modern stressor pattern of post-transformation productivity in productive restructuring in the health area. It is a qualitative study of the descriptive and exploratory type in which 30 professionals (nurses, doctors and dental surgeons) from a metropolitan region in the South of Brazil were interviewed, all of whom had prior experience in the public and private sectors. The results were analyzed through Discursive Textual Analysis. Capitalization is revealed as a major ethical problem in the series of new issues derived from the productivity-profitability imperative in health, due to the acritical incorporation of ethics that is restricted to the company's interests or to corporate-individual interests. The ethical problem of low professional commitment to the needs of the patient and of the social collective indicates the need to build a new engaged solidarity in order to increase the quality of public healthcare. Productivity targeted at individual and social needs/interests in the area of health requires a new self-managing and collective engagement of the subjects, supported by an institutional and ethical-political effort of group action, cooperation and solidarity.

Smallholder pig production

DEFF Research Database (Denmark)

Braae, Uffe Christian; Ngowi, Helena; Johansen, Maria Vang

2013-01-01

A cross-sectional study was carried out in the Mbeya Region, Tanzania, with the aim of describing the distribution and diversity of ectoparasites on pigs, within confinement and free-range production systems of smallholder farms. A total of 128 farms were surveyed, with 96 practising confinement...... and 32 practising free-range production systems. The prevalence of ectoparasites on pigs within confinement and free-range production systems was 24% and 84%, respectively. Logistic regression analyses revealed that keeping pigs in a free-range system and the presence of neighbouring pigs were risk...... although highly prevalent within both production systems. Keeping pigs in a free-range system and contact with neighbouring pigs were main risk factors for the presence of ectoparasites. Confinement was highly effective as a preventive tool against hard ticks....

Productivity growth in food crop production in Imo State, Nigeria ...

African Journals Online (AJOL)

Agriculture plays pivotal roles in Nigeria including food security, employment, foreign exchange earnings and poverty reduction. This study examined the growth in food crop productivity in Imo State in Nigeria with emphasis on the decomposition of total factor productivity (TFP) into technical progress, changes in technical ...

Non-timber forest product extraction as a productive bricolage process

NARCIS (Netherlands)

Ros-Tonen, M.; Arts, B.; van Bommel, S.; Ros-Tonen, M.; Verschoor, G.

2012-01-01

This chapter explores the usefulness of the ‘productive bricolage’ concept, coined by Croll and Parkin (1992) and further elaborated by Batterbury (2001), in understanding the role of non-timber forest products (NTFPs) in people’s livelihoods and the forested landscape. I argue that NTFP extraction

Innovative technologies of waste recycling with production of high performance products

International Nuclear Information System (INIS)

Gilmanshin, R; Azimov, Yu I; Gilmanshina, S I; Ferenets, A V; Galeeva, A I

2015-01-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented. (paper)

Innovative technologies of waste recycling with production of high performance products

Science.gov (United States)

Gilmanshin, R.; Ferenets, A. V.; Azimov, Yu I.; Galeeva, A. I.; Gilmanshina, S. I.

2015-06-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented.

"Legal highs" on the net-Evaluation of UK-based Websites, products and product information.

Science.gov (United States)

Schmidt, Martin M; Sharma, Akhilesh; Schifano, Fabrizio; Feinmann, Charlotte

2011-03-20

A vast array of substances are marketed as "legal highs" in the UK. These products are mainly marketed online and are packaged and produced to mimic illicit drugs. Little is known about the full range of products available at present and no studies have evaluated the product information provided to consumers. AIMS & HYPOTHESIS: To describe the available legal high products marketed by UK-based Internet retailers and evaluate the product information provided to consumers. Websites were identified using the terms "buy legal highs+UK" and two search engines. The first 100 hits and a random sample of 5% of the remaining results were screened. Websites based in the UK were included and all products were entered on a database. Information on product name, list price, claimed effects, side effects, contraindications and interactions was extracted. A descriptive analysis was conducted using SPSS v14. 115 Websites met the inclusion criteria but due to duplicate listings this was reduced to 39 unique Websites. 1308 products were found and evaluated. The average product price was 9.69 British pounds. Products took the form of pills (46.6%), smoking material (29.7%) and single plant material/extract (18.1%). Most products claimed to be stimulants (41.7%), sedatives (32.3%), or hallucinogens (12.9%). 40.1% of products failed to list ingredients, 91.9% failed to list side effects, 81.9% failed to list contraindications and 86.3% failed to list drug interactions. Top 5 products (with active ingredients in brackets) by frequency were Salvia divinorum (Salivinorin A), Kratom (Mitragynine), Hawaiian Baby Woodrose Seeds (Lysergic Acid Amide), Fly Agaric (Ibotenic Acid, Muscimol) and Genie (JWH018, CP47497). Products marketed as "legal highs" are easily available from UK-based Internet retailers and are reasonably affordable. Safety information provided to consumers is poor. Uninformed users risk serious adverse effects. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Pomegranate production and marketing

Science.gov (United States)

This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

Framework of product experience

NARCIS (Netherlands)

Desmet, P.; Hekkert, P.

2007-01-01

In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

Product line design

Czech Academy of Sciences Publication Activity Database

Anderson, S. P.; Celik, Levent

2015-01-01

Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

Anaerobic co-digestion of by-products from sugar production with cow manure

DEFF Research Database (Denmark)

Fang, Cheng; Boe, Kanokwan; Angelidaki, Irini

2011-01-01

Sugar beet leaves (SBL), sugar beet top (SBT), sugar beet pulp (SBP) and desugared molasses (DM) are by-products from the sugar production. In the present study we investigated the potential of SBL, SBT and SBP as feedstock for biogas production. The maximum methane potential of SBL, SBT and SBP ......-digesting 50% of SBP with cow manure....

Biodiesel production from microalgae: cultivation parameters that affect lipid production

International Nuclear Information System (INIS)

Arias Penaranda, Martha Trinidad; Martinez Roldan, Alfredo de Jesus; Canizares Villanueva, Rosa Olivia

2013-01-01

The microalgae have the capacity to mitigate CO 2 emissions and to produce lipids, which are considered with potential to obtain third-generation biofuel. This review provides updated information of the influence of culture conditions on the lipids production with high productivity and profile suitable for the biodiesel production. This document presents a compilation of research conclusions over the last 13 years around the world. in the literature consulted, the authors conclude that although the behavior of microalgae at physiological stress conditions, varies between species; the nutrients limitation, especially nitrogen and phosphorus, associated with heterotrophic growth or high irradiances in phototrophy are considered the most efficient strategies to increase the lipid content in microalgae, particularly triglycerides (consisting of saturated and monounsaturated fatty acids), which are excellent for the production of biodiesel. Also, it is reported that the lipid content increase and the number of unsaturated fatty acids decrease with the addition of small amounts of CO 2 and harvesting the biomass it the stationary phase of growth.

Productive Gaming

OpenAIRE

Brandstätter , Ulrich; Sommerer , Christa

2016-01-01

Part 4: Short Papers; International audience; Video games can be appropriated for productive purposes. Commercial games and game engines are often used for video productions, and game development companies provide development kits and modding environments to gaming communities and independent developers. With gamification, game principles are deployed in non-game contexts for benefits beyond pure entertainment. Most approaches are more focused on using games and their design elements rather t...

Minimizing activated carbons production cost

International Nuclear Information System (INIS)

Stavropoulos, G.G.; Zabaniotou, A.A.

2009-01-01

A detailed economic evaluation of activated carbons production process from various raw materials is undertaken using the conventional economic indices (ROI, POT, and NPV). The fundamental factors that affect production cost were taken into account. It is concluded that for an attractive investment in activated carbons production one should select the raw material with the highest product yield, adopt a chemical activation production scheme and should base product price on product-surface area (or more generally on product adsorption capacity for the adsorbate in consideration). A raw material that well meets the above-mentioned criteria is petroleum coke but others are also promising (charcoals, and carbon black). Production cost then can be optimized by determining its minimum value of cost that results from the intercept between the curves of plant capacity and raw material cost - if any. Taking into account the complexity of such a techno-economic analysis, a useful suggestion could be to start the evaluations from a plant capacity corresponding to the break-even point, i. e. the capacity at which income equals production cost. (author)

Competitiveness regulation of dairy products production in the Crimea

Directory of Open Access Journals (Sweden)

Domozhilkina Zh. V.

2016-05-01

Full Text Available the article outlines the results of studying the major problems concerning supporting competitiveness and quality of dairy products in the Crimea. The researchers compared the level of competitiveness of the dairy enterprise ltd. «Бег» with other brands of milk and suggested measures to improve the efficiency and effectiveness of competitiveness management of dairy products in this region.

Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

Science.gov (United States)

Ritprasertsri, Thitima; Chutima, Parames

2017-06-01

In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

Product variety, product complexity and manufacturing operational performance: A systematic literature review

DEFF Research Database (Denmark)

Trattner, Alexandria Lee; Hvam, Lars; Herbert-Hansen, Zaza Nadja Lee

Manufacturing in the twenty-first century has been wrought with the struggle to satisfy the rising demand for greater product variety and more complex products while still maintaining efficient manufacturing operations. However, the literature lacks an overview of which operational performance...... measures are most affected by increased variety and complexity. This study presents a systematic literature review of the recent scholarly literature on variety, complexity and manufacturing operational performance (MOP). Results show that product variety has a consistently negative relationship with MOP...... across different time, cost, quality and flexibility measures while product complexity lacks evidence of strong relationships with MOP measures....

An innovative model for regulating supplement products: Natural health products in Canada

International Nuclear Information System (INIS)

Nestmann, Earle R.; Harwood, Melody; Martyres, Stephanie

2006-01-01

On 1 January 2004, Health Canada officially added a new term to the global list of synonyms for dietary supplements: natural health products (NHP). Developed with the intent of providing Canadian consumers with ready access to NHP that are safe, effective, and of high quality, the Natural Health Products Regulations (the NHP regulations) are applicable to the sale, manufacture, packaging, labelling, importation, distribution, and storage of NHP, and are administered by the recently formed Natural Health Products Directorate (NHPD) within Health Canada. This paper provides an overview of the process for regulating supplement products in Canada

Ash-Based Building Panels Production and Demonstration of Aerock Decking Building Product

International Nuclear Information System (INIS)

Alan E. Bland; Jesse Newcomer

2007-01-01

Western Research Institute (WRI) of Laramie, Wyoming and AeRock, LLC of Eagar, Arizona (formerly of Bellevue, Washington) partnered, under sponsorship of the U.S. Department of Energy National Energy Technology Laboratory (U.S. DOE-NETL), to support the development of rapid-setting, ash-based, fiber-incorporated ''green'' building products. Green building materials are a rapidly growing trend in the building and construction industry in the US. A two phase project was implemented wherein Phase I assessed, through chemical and physical testing, ash, ash-based cement and fiber composites exhibiting superior structural performance when applied to the AeRock mixing and extrusion process and involved the conduct of pilot-scale production trials of AeRock products, and wherein Phase II involved the design, construction, and operation of a commercial-scale plant to confirm production issues and to produce panels for performance evaluations. Phase I optimized the composite ingredients including ash-based cement, Class F and Class C DFGD ash, and various fiber reinforcements. Additives, such as retardants and accelerators, were also evaluated as related to extruder performance. The optimized composite from the Phase I effort was characterized by a modulus of rupture (MOR) measured between 1,931 and 2,221 psi flexural strength, comparable to other wood and non-wood building materials. Continuous extrusion of the optimum composite in the AeRock pilot-scale facility produced an excellent product that was assembled into a demonstration for exhibit and durability purposes. Finishes, from plain to marbled, from bright reds to muted earth tones and with various textures, could easily be applied during the mixing and extrusion process. The successful pilot-scale demonstration was in turn used to design the production parameters and extruder dies for a commercial scale demonstration at Ultrapanel Pty, Ltd of Ballarat, Australia under Phase II. The initial commercial-scale production

Peer production on the Internet as an example of global disintegration of production process

OpenAIRE

Slawomir Czetwertynski

2012-01-01

The article is an attempt to explain the reason for participation in peer production in the context of decentralization of production process. There are two maintheses. The first is that the motivations of participants in production are the same as motivation for gainful employment. Although in the case of the partnership production model bypasses the medium of money, because the participants do not receive payment for manufactured products. The second argument indicates the need for the disi...

Production of Metabolites

DEFF Research Database (Denmark)

2011-01-01

A recombinant micro-organism such as Saccharomyces cerevisiae which produces and excretes into culture medium a stilbenoid metabolite product when grown under stilbenoid production conditions, which expresses in above native levels a ABC transporter which transports said stilbenoid out of said...... micro-organism cells to the culture medium. The genome of the Saccharomyces cerevisiae produces an auxotrophic phenotype which is compensated by a plasmid which also expresses one or more of said enzymes constituting said metabolic pathway producing said stilbenoid, an expression product of the plasmid...

Adoption of Dynamic Product Information: An Empirical Investigation of Supporting Purchase Decisions on Product Bundles

OpenAIRE

Maass, Wolfgang; Kowatsch, Tobias

2008-01-01

Up until now, brick-and-mortar stores provide consumers with static product information in the form of printed product labels. This kind of product information does neither adapt to consumer needs nor facilitates new business models (e.g. consumer experience or ad hoc product bundling by products itself). By contrast, dynamic product information provided by mobile recommendation agents (MRA) may leverage these limitations. In this article we formulate a Simplified Consumer Choice (SCC) model ...

Lecture III. Production of charm

International Nuclear Information System (INIS)

Anon.

1978-01-01

The production of charmed particles is discussed using simple arguments to understand the production cross sections in various situations in a survey of masses, names, decay modes, and production mechanisms. Thus an estimation can be made of the best place to find charmed particles and the places where it is more difficult to find them. Discussed are e + e - annihilation, peripheral production in hadron collisions, inclusive production in hadron collisions, production in (ν, anti ν)N reactions, and photoproduction of charm. 12 references

Platform-based production development

DEFF Research Database (Denmark)

Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

2015-01-01

Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

Scenario based product design

NARCIS (Netherlands)

Tideman, M.

2008-01-01

Creating good products is not an easy thing to do. There are usually many different people who have an interest in the product. People such as the user, of course, but also marketing managers, production engineers, maintenance workers, recycling specialists, and government representatives, just to

40 CFR 415.330 - Applicability; description of the carbon monoxide and by-product hydrogen production subcategory.

Science.gov (United States)

2010-07-01

... carbon monoxide and by-product hydrogen production subcategory. 415.330 Section 415.330 Protection of... MANUFACTURING POINT SOURCE CATEGORY Carbon Monoxide and By-Product Hydrogen Production Subcategory § 415.330 Applicability; description of the carbon monoxide and by-product hydrogen production subcategory. The provisions...

Managing the New Product Portfolio

DEFF Research Database (Denmark)

Larsson, Flemming

2008-01-01

Product development companies are increasingly confronted with an unforgiving global marketplace, which urges the top management to pursue every product development opportunity that appears on the road. This situation incurs an important question: Which product development opportunities should a ....... The contributions encourage an improved understanding of the portfolio management concept and support industry professionals in their efforts to compose and continuously maintain a commercially strong product development portfolio.......Product development companies are increasingly confronted with an unforgiving global marketplace, which urges the top management to pursue every product development opportunity that appears on the road. This situation incurs an important question: Which product development opportunities should...

Activation Product Inverse Calculations with NDI

Energy Technology Data Exchange (ETDEWEB)

Gray, Mark Girard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-27

NDI based forward calculations of activation product concentrations can be systematically used to infer structural element concentrations from measured activation product concentrations with an iterative algorithm. The algorithm converges exactly for the basic production-depletion chain with explicit activation product production and approximately, in the least-squares sense, for the full production-depletion chain with explicit activation product production and nosub production-depletion chain. The algorithm is suitable for automation.

Novolak Production

Science.gov (United States)

Aiba, Hiroshi

Novolak resins are produced by reacting formaldehyde (30-55% concentration) with phenol under acidic conditions, with oxalic acid as the preferred catalyst and in special conditions, sulfuric acid. Depending on the batch size, all raw material components can be introduced into the reactor, or when there is an increase in the batch size as well as in the reactor volume, the reaction exotherm is controlled by a gradual addition of formaldehyde. Modern novolak production facilities are automated and programmed for reduced operational cost. A flow diagram of a general production line for the manufacture of novolak is shown. Recovery of the novolak is accomplished by the removal of water and devolatilization of crude novolak to molten, low-free phenol novolak resin which can be isolated as flake or pastille or dissolved in appropriate solvents. Novolak is stored either in a solid flake or pastille form or in solution. Most production is conducted under atmospheric conditions, but there are some recent, novel activities such as pressure in a hermetically-closed reactor reaching 0.1-10 MPa by using the heat of reaction without reflux to shorten reaction time, accelerating dehydration time by flash distillation, and providing economic benefit in the cost of novolak production.

Production sharing agreements

International Nuclear Information System (INIS)

1994-01-01

This paper, which was presented at the Production Sharing Agreement seminar, discusses economic rent, negotiations, trends in fiscal system development, and concessionary systems. Production sharing contracts, risk service contracts, joint ventures and the global market are examined. (UK)

Gestion de production

CERN Document Server

Courtois, Alain; Pillet, Maurice

1995-01-01

n ouvrage de référence pour tous les gestionnaires de production industrielle. Un cas concret d'entreprise fictive, fil rouge de l'ouvrage, pour expliquer et illustrer les différents outils et méthodes utilisés. Toutes les méthodes et tous les outils de gestion de production, des plus traditionnels aux novateurs, explicités, comparés et illustrés. L'ouvrage, entièrement mis à jour, reflète toutes les évolutions liées à la gestion de production. II se divise désormais en deux grandes partes ; la première regroupe les méthodes de base de la gestion de la production ainsi que l'informatisation de celles-ci (chapitres 2 à 10) ; la seconde concerne les méthodes d'amélioration de la production (chapitres 11 à 15), en mettant un accent fort sur la philosophie du Lean Manufacturing : L'entreprise en mouvement avec le Lean ; Les principaux outils du Lean ; Le pilotage d'atelier en flux tirés par la méthode Kanban ; L'implantation d'ateliers ; Les indicateurs de performance. Pour faciliter la le...

Global Malmquist indices of productivity change in Egyptian wheat production

Energy Technology Data Exchange (ETDEWEB)

Elasraag, Y.H.; Alarcón, S.

2017-07-01

This study aims to measure the total factor productivity of the main govern orates of wheat production in Egypt during the time period 1990-2012 and decompose it into technical change, efficiency change and scale change. We used Global Malmquist TFP index as a non-parametric approach. The results indicated that the contribution of technical change component is more important than the efficiency change component. In fact technical change rose, 25.7%, while efficiency change presented a little decline, 3.7%. The decomposition of efficiency change indicated that the main problem of wheat production in Egypt was scale efficiency that worsened by 5.5%.

Development of a yeast cell factory for production of aromatic products

DEFF Research Database (Denmark)

Rodriguez Prado, Edith Angelica; Kildegaard, Kanchana Rueksomtawin; Li, Mingji

2014-01-01

There is much interest in aromatic chemicals in the chemical industry as these can be used for production of dyes, anti-oxidants, nutraceuticals and food ingredients. Yeast is a widely used cell factory and it is particularly well suited for production of aromatic chemicals via complex biosynthetic...... routes involving P450 enzymes. In Saccharomyces cerevisiae the fluxes towards aromatic acids (L-tryptophan, L-tyrosine and L-phenylalanine) are strictly controlled on transcriptional and kinetic levels and therefore are difficult to manipulate. We engineered S. cerevisiae for increased production...... of aromatic compounds by eliminating degradation, up-regulating the key enzyme encoding genes, and removing feed-back inhibition in the pathway. In order to test the strain performance we overexpressed heterologous pathway for coumaric acid production. We obtained 4-fold higher concentrations of coumaric acid...

Aqueous Productivity: An enhanced productivity indicator for water

Science.gov (United States)

Ritzema, Randall S.

2014-09-01

Increasing demand for scarce water supplies is fueling competition between agricultural production and other municipal and environmental demands, and has heightened the need for effective indicators to measure water performance and support water allocation and planning processes. Water productivity (WP), defined as the ‘ratio of the net benefits from crop, forestry, fishery, livestock, and mixed agricultural systems to the amount of water required to produce those benefits', is one such indicator that has gained prominence, particularly in research-for-development efforts in the developing world. However, though WP is a framework well-suited to systems where water use is directly attributable, particularly via depletion, to definitive benefits, the suitability of the approach becomes questionable when these conditions are not met, such as in multiple use systems with high re-use and non-depleting uses. These factors furthermore make WP highly scale-dependent, complicating comparative studies across scales and systems. This research forwards ‘aqueous productivity' (AP) as an alternative indicator that addresses some inherent limitations in the WP approach and enhances productivity estimates for water in integrated systems. Like WP, AP is expressed as a ratio of benefit to water volume. However, AP uses a systems approach and is based on the concept that elements within a hydrologic system are linked via water flow interactions, and that those elements either ‘extract' value from associated water flows or ‘infuse' value into them. The AP method therefore calculates the ‘aqueous productivity', a ratio indicating the ‘dissolved' production-related economic value of all downstream uses of an individual water flow, for each inter-element and cross-boundary flow in the system. The AP conceptual framework and analytical methodology are presented. The method is then applied to two example hydroeconomic systems and compared to equivalent WP analysis. Discussion

MICROORGANISMS IN CONFECTIONERY PRODUCTS

Directory of Open Access Journals (Sweden)

Ľubomíra Juhaniaková

2011-08-01

Full Text Available The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectionery products were used. Numbers of coliforms bacteria in confectionery products ranged from <1x101 to 4x102 cfu.g-1, the number of microscopic fungi ranged from 0 to <1x101 cfu.g-1, the number of yeasts from <1x101 to 5.5x102 cfu.g-1, cells of Salmonella sp. were not detected and the number of staphylococci was from 0 to <1x101 cfu.g-1. All investigated samples of confectionary products were in accordance with the Codex Alimentarius of the Slovak Republic.

New Trend on Halva Production: Dietetic Halva and Nougat. Production Technology and Compositions

Directory of Open Access Journals (Sweden)

Emil Racolta

2013-11-01

Full Text Available In the last years sugar free confectionery market had grown steadily. This types of products are primarily addressed to diabetics and dieters, but the main driving factor of their growth is the increase of the obese population who raised concern about their health. Halva is known as a high caloric product with its nutritional energy higher than 500 kcal/100g, the demand of a sugar free version for this confectionery products group being those a current need. This work aimed to develop new products – dietetic halva and nougat, their production technology and compositions being in detail described. A new trend on halva production was established by developing a dietetic halva and nougat. The problem which is solved by the current work is to assure a proper technology in order to obtain a dietetic halva similar in taste and texture with the conventional one.

SMART product innovation

DEFF Research Database (Denmark)

Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

2016-01-01

Among the inspirations for the SMART process is “design to customer value,” where products are modified based on a thorough understanding of customers that allows product developers to eliminate features that do not affect customer satisfaction while including only the elements and functionality...... that customers really appreciate. The SMART process includes methods to understand product value for the customer and the user; analyse the cost of components and processes; combine customer value and cost reduction potentials into feasible, high-value concepts; and generate prototypes that can be tested...... with users and customers....

OPEC's production policies

International Nuclear Information System (INIS)

Mabro, R.

1989-01-01

An enlightening study on the workings of OPEC its policies and practices, agreements and disagreements, and how each affects the world petroleum market. The book explores OPEC's production patterns and quota agreements and the relationship between production and pricing policies. Political compromises that have hindered OPEC production agreements and their successful implementation are covered - compromises such as concessions made to the U.A.E. and those resulting from the Gulf war. Notable historical events are cited, and a look into the future at what we can expect of OPEC in coming years concludes the study

Globalization and Productivity

DEFF Research Database (Denmark)

Hayakawa, Kazunobu; Machikita, Tomohiro

2012-01-01

Recent empirical studies which utilize plant- or establishment-level data to examine globalization's impact on productivity have discovered many causal mechanisms involved in globalization's impact on firms’ productivity. Because these pathways have been broad, there have been few attempts...

A Framework For Product Development

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Robotham, Antony John

1999-01-01

-aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

Bacterial Cellulose Production from Industrial Waste and by-Product Streams.

Science.gov (United States)

Tsouko, Erminda; Kourmentza, Constantina; Ladakis, Dimitrios; Kopsahelis, Nikolaos; Mandala, Ioanna; Papanikolaou, Seraphim; Paloukis, Fotis; Alves, Vitor; Koutinas, Apostolis

2015-07-01

The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen) 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L) and commercial sucrose (4.9 g/L) were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L) were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102-138 g · water/g · dry bacterial cellulose, viscosities of 4.7-9.3 dL/g, degree of polymerization of 1889.1-2672.8, stress at break of 72.3-139.5 MPa and Young's modulus of 0.97-1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients.

Effect of Recipe and Production Technology of Chocolate Products on Their Quality During Storage

Directory of Open Access Journals (Sweden)

Lenka Machálková

2017-01-01

Full Text Available The effect of four storage temperature modes (6, 12, 20 and 30 °C on sensory properties of chocolate products and their colour changes in the experiment over a period of 6 months. The results were evaluated with regard to the production technology and composition of chocolate products. The experiment was performed on filled milk chocolate product called Orion Pistachio made in four versions such as a standard containing cocoa mass of 35 % referred to retempered variant (RS and not treated by retempering (NS variant and with higher proportion of cocoa mass (45 % stated as retempered variant (R45 and not treated by retempering (N45 variant. Retempering means the exposure of products for 24 hours at 24 °C immediately after the production and packaging. The results show that the technology of retempering can effectively increase the resistance of chocolate products to the fat bloom as reflected in the improved colour stability. Sensory most acceptable products were stored at 6 and 12 °C throughout the experiment.

Age, Wage and Productivity

NARCIS (Netherlands)

van Ours, J.C.; Stoeldraijer, L.

2010-01-01

Previous empirical studies on the effect of age on productivity and wages find contradicting results. Some studies find that if workers grow older there is an increasing gap between productivity and wages, i.e. wages increase with age while productivity does not or does not increase at the same

Market-based product development

DEFF Research Database (Denmark)

Bisp, Søren; Harmsen, Hanne

1997-01-01

A large body of research results on successful product development exists. The results are full of normative advice on how to conduct prod-uct development. At the same time studies have shown that product development practice has only to a very li extent been influenced by these research results...

Optimizing production under uncertainty

DEFF Research Database (Denmark)

Rasmussen, Svend

This Working Paper derives criteria for optimal production under uncertainty based on the state-contingent approach (Chambers and Quiggin, 2000), and discusses po-tential problems involved in applying the state-contingent approach in a normative context. The analytical approach uses the concept...... of state-contingent production functions and a definition of inputs including both sort of input, activity and alloca-tion technology. It also analyses production decisions where production is combined with trading in state-contingent claims such as insurance contracts. The final part discusses...

PRODUCT STRUCTURE DIGITAL MODEL

Directory of Open Access Journals (Sweden)

V.M. Sineglazov

2005-02-01

Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

Profitability indicators of milk production cost center in intensive systems of production

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2012-01-01

Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

Production and environmental impact of dairy cattle production in Denmark 1900–2010

DEFF Research Database (Denmark)

Kristensen, Troels; Aaes, Ole; Weisbjerg, Martin Riis

2015-01-01

Cattle production during the last century has changed dramatically in Western Europe, including Denmark, with a steady increase in production per animal and in herd and farm size. The effect of these changes on total production, herd efficiency, surplus of nitrogen (N) at herd and farm level......, but that this requires a strong focus on nitrogen management at the farm level and production efficiency in the herd....... and emission of greenhouse gases (GHG) per kg product has been evaluated for the Danish dairy cattle sector based on historic information. Typical farms representing the average situation for Danish dairy cattle farms and land required for feed supply was modeled for the situation in: (A) 1920 – representing...

The Use of Alternative Raw Material in Production of Pastry Products as a Progressive Direction in Creating the Products of High Biological Value

Directory of Open Access Journals (Sweden)

Janа Bachinska

2017-02-01

Full Text Available This paper examines the impact of the use of alternative vegetable raw materials in the manufacture of pastry products with high biological value; it presents the results of evaluation of commodity of the developed products and compares them with the main samples presented in Kharkiv trade network. The feasibility of using a mixture of fiber and pumpkin seeds in the technology of pastry production to extend the range of confectionery products of high biological value and products with reduced calories has been proved. Adding the mixture of fiber and pumpkin seeds to biscuits and cakes positively affected the chemical composition of the ready-made product, saturating it with useful and necessary to human body mineral elements, vitamins, dietary fiber.

Greenhouse production systems for people

NARCIS (Netherlands)

Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.

2012-01-01

Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental

Non-OPEC future production

International Nuclear Information System (INIS)

Campbell, C.J.

1997-01-01

Recent optimistic predictions of future growth in non-OPEC oil production have failed to discuss the underlying resource base. Peak discovery occurred some time ago and exploration has been sufficiently extensive to indicate that no new major provinces remain undetected. Advances in technology are likely only to influence production from the smaller and more difficult fields and will not have much effect globally. The main impact of improved technology is to increase the production rate and accelerate depletion thereby. The recent increasing trend in non-OPEC production cannot be extrapolated indefinitely. It is argued that Gulf OPEC share of world production will rise to 30% before the end of the century in response to rising demand thus setting the scene for another oil price shock. (UK)

Product Architecture Modularity Strategies

DEFF Research Database (Denmark)

Mikkola, Juliana Hsuan

2003-01-01

The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

Product Development and Commercialization of Diagnostic or Life Science Products for Scientists and Researchers.

Science.gov (United States)

Alonso, Meghan M

2017-01-01

Commercializing a diagnostic or life science product often encompasses different goals than that of research and grant funding. There are several necessary steps, and a strategy needs to be well defined in order to be successful. Product development requires input from and between various groups within a company and, for academia, outside entities. The product development stakeholder groups/entities are research, marketing, development, regulatory, manufacturing, clinical, safety/efficacy, and quality. After initial research and development, much of the work in product development can be outsourced or jointly created using public-private partnerships. This chapter serves as an overview of the product development process and provides a guide to best define a product strategy.

Social power, product conspicuousness, and the demand for luxury brand counterfeit products.

Science.gov (United States)

Bian, Xuemei; Haque, Sadia; Smith, Andrew

2015-03-01

The aim of this article is twofold: (1) to achieve a better understanding of the psychological determinants of the demand for luxury brand counterfeit products (LBCP) through exploring the effects of social power; (2) to extend power literature by identifying boundary conditions of the relationship between social power and compensatory consumption identified by Rucker and Galinsky (2008, J. Consum. Res., 35, 257-267) and Rucker and Galinsky (2009, J. Exp. Soc. Psychol., 45, 549-555). Findings from three experiments demonstrate that social power holds key insights into understanding consumers' purchase propensity for LBCP; product conspicuousness moderates the effects of social power on purchase propensity for status products; these moderation effects are only observed when the status products are LBCP but not genuine products. This article, therefore, contributes to the literature regarding the demand for counterfeits as well as the social power and compensatory consumption literature. © 2014 The British Psychological Society.

Productivity, Efficiency, and Competitiveness of Small-Scale Organic Cotton Production in Tanzania

DEFF Research Database (Denmark)

Mgeni, Dotto; Henningsen, Arne

cannot be adjusted in the short run. However, land, labor, and organic fertilizer can neither be traded on a perfect market nor are their quantities completely fixed for cotton production, but these input quantities can be adjusted by adjusting their use for other activities of the household. Hence......Cotton is known as the “white gold” of Africa since it is the only export crop in which the continent’s share in the world market has increased over the past decades. Total cotton production as well as productivity grew particularly in Western and Central Africa. In contrast, cotton production grew...... and output, as well as socio-economic and agronomic factors, but also on the shadow prices of all sparsely traded inputs, i.e. land, labor, and organic fertilizer. Hence, we can not only analyze productivity, technical efficiency, and scale efficiency, but also allocative efficiency, profitability...

Sicilian potential biogas production

Directory of Open Access Journals (Sweden)

Antonio Comparetti

2013-09-01

Full Text Available This study is aimed at predicting the Sicilian potential biogas production, using the Organic Fraction of Municipal Solid Waste (OFMSW, animal manure and food industry by-products, in a region where only one biogas plant using MSW and one co-digestion plant are nowadays available. The statistical data about OFMSW, the number of animals bred in medium and large farms and the amounts of by-products of food processing industries were evaluated, in order to compute the Sicilian potential biogas and energy production. The OFMSW produced in Sicily, that is 0.8 million tons ca. per year (37% of MSW, could be used in a bio-reactor, together with other raw materials, for Anaerobic Digestion (AD process, producing biogas and “digestate”. Moreover, 3.03 million tons ca. of manure, collected in medium and large animal husbandry farms (where cows, pigs and poultry are bred, and 350 thousand tons ca. of by-products, collected in food processing industries (pomace from olive oil mills and grape marc from wineries, might be used for AD process. The Sicilian potential biogas production from the AD of the above raw materials is 170.2 millions of m3, that is equal to 1023.4 GWh of energy per year, of which 484 GWh from animal manure, 303 GWh from OFMSW and 236.4 GWh from food industry by-products. The highest biogas production is in the province of Palermo (35.6 millions of m3, Ragusa (30.8 millions of m3 and Catania (22.8 millions of m3, having a potential energy production of 213.8, 185 and 137 GWh, respectively.

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

A Land Product Characterization System for Comparative Analysis of Satellite Data and Products

Directory of Open Access Journals (Sweden)

Kevin Gallo

2017-12-01

Full Text Available A Land Product Characterization System (LPCS has been developed to provide land data and products to the community of individuals interested in validating space-based land products by comparing them with similar products available from other sensors or surface-based observations. The LPCS facilitates the application of global multi-satellite and in situ data for characterization and validation of higher-level, satellite-derived, land surface products (e.g., surface reflectance, normalized difference vegetation index, and land surface temperature. The LPCS includes data search, inventory, access, and analysis functions that will permit data to be easily identified, retrieved, co-registered, and compared statistically through a single interface. The system currently includes data and products available from Landsat 4 through 8, Moderate Resolution Imaging Spectroradiometer (MODIS Terra and Aqua, Suomi National Polar-Orbiting Partnership (S-NPP/Joint Polar Satellite System (JPSS Visible Infrared Imaging Radiometer Suite (VIIRS, and simulated data for the Geostationary Operational Environmental Satellite (GOES-16 Advanced Baseline Imager (ABI. In addition to the future inclusion of in situ data, higher-level land products from the European Space Agency (ESA Sentinel-2 and -3 series of satellites, and other high and medium resolution spatial sensors, will be included as available. When fully implemented, any of the sensor data or products included in the LPCS would be available for comparative analysis.

Decomposing one-relator products of cyclic groups into free products with amalgamation

International Nuclear Information System (INIS)

Benyash-Krivets, V V

1998-01-01

The problem of the decomposition of one-relator products of cyclics into non-trivial free products with amalgamation is considered. Two theorems are proved, one of which is as follows. Let G= 2n =R m (a,b)=1>, where n≥0, m≥2, and R(a,b) is a cyclically reduced word containing b in the free group on a and b. Then G is a non-trivial free product with amalgamation. One consequence of this theorem is a proof of the conjecture of Fine, Levin, and Rosenberger that each two-generator one-relator group with torsion is a non-trivial free product with amalgamation

Challenges in Introducing New Products: A Case Study on the New Product Development Process

Science.gov (United States)

Rankin, Robert; Mintu-Wimsatt, Alma

2017-01-01

The case is based on an actual product introduction, and is designed to provide instruction on the new product development process. With the cost to launch new products estimated at least US $15 million and new product failure rates ranging from 40% to 80%, it is imperative that students learn how to determine the financial and market feasibility…

Versioning of printed products

Science.gov (United States)

Tuijn, Chris

2005-01-01

During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

Value stream mapping as a tool for lean production waste-free production; Wertstromanalyse als Werkzeug fuer Lean Production. Die verschwendungsfreiere Produktion

Energy Technology Data Exchange (ETDEWEB)

Boerkircher, Mikko [Rheinkalk GmbH, Flandersbach (Germany). Bereich Brennen und Veredeln

2010-01-15

In the value stream mapping method the product flow is the focal point of all considerations. The method can be used easily and quickly and produces concrete results. A company soon learns to view its own production in a different light. In the following contribution it is shown how companies can identify potential for improvement in their production. (orig.)

Reconstituted products from oak

Science.gov (United States)

W. C. Lewis; B. G. Heebink

1971-01-01

"Reconstituted" describes a family of panel products made from fractionated oak, bonded with either a synthetic resin or a natural lignin bond. Several current commercial fiber panel products from oak are described, and the status of research on experimental products and processes is presented. Recent technological developments are removing the stigma...

Star Products and Applications

OpenAIRE

Iida, Mari; Yoshioka, Akira

2010-01-01

Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

Control of the dehydration process in production of intermediate-moisture meat products: a review.

Science.gov (United States)

Chang, S F; Huang, T C; Pearson, A M

1996-01-01

IM meat products are produced by lowering the aw to 0.90 to 0.60. Such products are stable at ambient temperature and humidity and are produced in nearly every country in the world, especially in developing areas where refrigeration is limited or unavailable. Traditionally IM meats use low cost sources of energy for drying, such as sun drying, addition of salt, or fermentation. Products produced by different processes are of interest since they do not require refrigeration during distribution and storage. Many different IM meat products can be produced by utilizing modern processing equipment and methods. Production can be achieved in a relatively short period of time and their advantages during marketing and distribution can be utilized. Nevertheless, a better understanding of the principles involved in heat transfer and efficiency of production are still needed to increase efficiency of processing. A basic understanding of the influence of water vapor pressure and sorption phenomena on water activity can materially improve the efficiency of drying of IM meats. Predrying treatments, such as fermentation and humidity control, can also be taken advantage of during the dehydration process. Such information can lead to process optimization and reduction of energy costs during production of IM meats. The development of sound science-based methods to assure the production of high-quality and nutritious IM meats is needed. Finally, such products also must be free of pathogenic microorganisms to assure their success in production and marketing.

Branding Strategies for High Technology Products: The Effects of Consumer and Product Innovativeness

NARCIS (Netherlands)

Truong, Y.; van Klink, R.; Simmons, G.; Grinstein, A.; Palmer, M.

2017-01-01

Choice of an appropriate branding strategy is a critical determinant of new product success. Prior work on fast-moving-consumer-goods (FMCG) prescribes that new products carry new (vs. existing) brand names to appeal to earlier adopters - a critical target for new products. However, such a

Between Product Development and Mass Production: Tensions as Triggers for Concept-Level Learning

Science.gov (United States)

Jalonen, Meri; Ristimäki, Päivi; Toiviainen, Hanna; Pulkkis, Anneli; Lohtander, Mika

2016-01-01

Purpose: This paper aims to analyze learning in organizational transformations by focusing on concept-level tensions faced in two young companies, which were searching for a reorientation of activity with a production network between innovative product development and efficient mass production. Design/methodology/approach: An intervention-based…

Production Systems and Supplier Selection

DEFF Research Database (Denmark)

Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

2016-01-01

strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...

Meteorology Products - Naval Oceanography Portal

Science.gov (United States)

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › FNMOC › Meteorology Products FNMOC Logo FNMOC Navigation Meteorology Products Oceanography Products Tropical Applications Climatology and Archived Data Info Meteorology Products Global

MICROBIOLOGICAL QUALITY OF CONFECTIONARY PRODUCTS

Directory of Open Access Journals (Sweden)

Ľubomíra Juhaniaková

2013-02-01

Full Text Available The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: total count of bacteria, coliforms bacteria,mesophilic aerobes bacteria and microscopic filamentous fungi were observed. The confectionery products were evaluated: Kremeš and Venčekcake. For microbiological tests 20 samples of confectionery products were used. The numbers of total count of bacteria ranged from 3.29 log CFU.g-1, the number of mesophilic aerobes bacteria ranged from 1.86 to 2.85 log CFU.g-1, coliforms bacteria in confectionery products ranged from 0to 2.06CFU.g-1and the number of microscopic fungi ranged from 1.13 to 1.96CFU.g-1. The samples of cake prom private production showed better microbiological quality as samples from market production. All investigated samples of confectionary products were inaccordance with the Codex Alimentarius of the Slovak Republic.

Biological hydrogen production by dark fermentation: challenges and prospects towards scaled-up production.

Science.gov (United States)

RenNanqi; GuoWanqian; LiuBingfeng; CaoGuangli; DingJie

2011-06-01

Among different technologies of hydrogen production, bio-hydrogen production exhibits perhaps the greatest potential to replace fossil fuels. Based on recent research on dark fermentative hydrogen production, this article reviews the following aspects towards scaled-up application of this technology: bioreactor development and parameter optimization, process modeling and simulation, exploitation of cheaper raw materials and combining dark-fermentation with photo-fermentation. Bioreactors are necessary for dark-fermentation hydrogen production, so the design of reactor type and optimization of parameters are essential. Process modeling and simulation can help engineers design and optimize large-scale systems and operations. Use of cheaper raw materials will surely accelerate the pace of scaled-up production of biological hydrogen. And finally, combining dark-fermentation with photo-fermentation holds considerable promise, and has successfully achieved maximum overall hydrogen yield from a single substrate. Future development of bio-hydrogen production will also be discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of medical isotope production with the accelerator production of tritium (APT) facility

International Nuclear Information System (INIS)

Benjamin, R.W.; Frey, G.D.; McLean, D.C., Jr; Spicer, K.M.; Davis, S.E.; Baron, S.; Frysinger, J.R.; Blanpied, G.; Adcock, D.

1997-01-01

The accelerator production of tritium (APT) facility, with its high beam current and high beam energy, would be an ideal supplier of radioisotopes for medical research, imaging, and therapy. By-product radioisotopes will be produced in the APT window and target cooling systems and in the tungsten target through spallation, neutron, and proton interactions. High intensity proton fluxes are potentially available at three different energies for the production of proton- rich radioisotopes. Isotope production targets can be inserted into the blanket for production of neutron-rich isotopes. Currently, the major production sources of radioisotopes are either aging or abroad, or both. The use of radionuclides in nuclear medicine is growing and changing, both in terms of the number of nuclear medicine procedures being performed and in the rapidly expanding range of procedures and radioisotopes used. A large and varied demand is forecast, and the APT would be an ideal facility to satisfy that demand

The Internationalisation of Production

DEFF Research Database (Denmark)

Yang, Cheng; Madsen, Erik Skov

2013-01-01

practice is further analysed in terms of (1) general information of each case company; (2) motivation of production internationalisation of each case company; (3) limitations as SMEs to internationalise production; (4) operational activities during the internationalization; (5) benefits of joint effort......This paper mainly aims to explore how SMEs internationalise their production. Directed by this objective, a new practice adopted by five Danish SMEs to internationalise their production to China is identified, which to our knowledge has never been reported by any of the existing literature. The new...

Product/Service-System Development

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

2007-01-01

‘Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...

An economic production model for time dependent demand with rework and multiple production setups

Directory of Open Access Journals (Sweden)

S.R. Singh

2014-04-01

Full Text Available In this paper, we present a model for time dependent demand with multiple productions and rework setups. Production is demand dependent and greater than the demand rate. Production facility produces items in m production setups and one rework setup (m, 1 policy. The major reason of reverse logistic and green supply chain is rework, so it reduces the cost of production and other ecological problems. Most of the researchers developed a rework model without deteriorating items. A numerical example and sensitivity analysis is shown to describe the model.

The economic production lot size model extended to include more than one production rate

DEFF Research Database (Denmark)

Larsen, Christian

2005-01-01

production rates should be chosen in the interval between the demand rate and the production rate which minimizes unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed-form expressions for all optimal runtimes as well as the minimum average cost....... This analysis reveals that it is the size of the setup cost that determines the need for being able to use several production rates. We also show how to derive a near-optimal solution of the general problem....

Product differentiation among health maintenance organizations: causes and consequences of offering open-ended products.

Science.gov (United States)

Wholey, D R; Christianson, J B

1994-01-01

Open-ended products that allow an HMO enrollee to use providers who are not affiliated with the HMO have become an important component of the Clinton administration's health reform proposal, because these products maintain consumer freedom of choice of any provider. However, little is known about the consequences of offering an open-ended product from an organizational standpoint. This paper uses a theory of "spatial competition" to examine the decisions of health maintenance organizations to offer an open-ended product and the effect of offering an open-ended product on their enrollment.

Product Differentiation and Positioning: Confused Concepts

OpenAIRE

Shaheen Borna; Joseph Chapman

1993-01-01

This article examines two common marketing terms: product positioning and product differentiation. Many authors use these terms interchangeably, yet most marketing texts treat product positioning and product differentiation as two seperate concepts. This article attempts to identify the underlying concepts of both product differentiation and product positioning. Product differentiation is shown to be a special case of product positioning: therefore, it is suggested that marketers may want to ...

Production (information sheets)

NARCIS (Netherlands)

2007-01-01

Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

Global product development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2016-01-01

Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

Accelerated product development

NARCIS (Netherlands)

Langerak, F.; Seth, J.N.; Malhotra, N.K.

2011-01-01

Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

Lean production

OpenAIRE

Veselková, Jana

2011-01-01

The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

Biodiesel production by microalgal biotechnology

Energy Technology Data Exchange (ETDEWEB)

Huang, GuanHua [School of Chemical Engineering and Technology, China University of Mining and Technology (China); Chen, Feng [School of Biological Sciences, The University of Hong Kong, Pokfulam, Hong Kong (China); College of Light Industry and Food Sciences, South China University of Technology, Guangzhou (China); Wei, Dong; Zhang, XueWu; Chen, Gu [College of Light Industry and Food Sciences, South China University of Technology, Guangzhou (China)

2010-01-15

Biodiesel has received much attention in recent years. Although numerous reports are available on the production of biodiesel from vegetable oils of terraneous oil-plants, such as soybean, sunflower and palm oils, the production of biodiesel from microalgae is a newly emerging field. Microalgal biotechnology appears to possess high potential for biodiesel production because a significant increase in lipid content of microalgae is now possible through heterotrophic cultivation and genetic engineering approaches. This paper provides an overview of the technologies in the production of biodiesel from microalgae, including the various modes of cultivation for the production of oil-rich microalgal biomass, as well as the subsequent downstream processing for biodiesel production. The advances and prospects of using microalgal biotechnology for biodiesel production are discussed. (author)

Hydrogen production by several cyanobacteria

Energy Technology Data Exchange (ETDEWEB)

Kumar, Dhruv; Kumar, H.D. (Banaras Hindu Univ., Varanasi (India). Dept. of Botany)

1992-11-01

Twenty species belonging to eleven genera of nitrogen-fixing and non-nitrogen-fixing cyanobacteria were screened for production of hydrogen. Only one species each of Nostoc and Anabaena showed light-and nitrogenase-dependent aerobic hydrogen production. The highest rate of aerobic hydrogen production was recorded in Anabaena sp. strain CA. When incubated anaerobically under 99% Ar + 1% CO[sub 2], all the tested strains produced hydrogen. Nickel supplementation completely abolished hydrogen production both under aerobic and anaerobic conditions, except in Anabaena sp. strain CA, where only the rate of production was decreased. Species of Plectonema, Oscillatoria and Spirulina showed methyl viologen-dependent (hydrogenase-dependent) hydrogen production. Other physiological activities were also studied with a view to selecting a suitable organism for large-scale production of hydrogen. (author)

Petroleum product market outlook

International Nuclear Information System (INIS)

2005-09-01

The influence of petroleum market disturbances on price increases was discussed with particular reference to Hurricane Katrina and the loss of refinery production and damage to oil infrastructure in the United States. The supply of petroleum products in Canada will be very tight heading into the winter of 2006, despite the fact that Canadian refineries are operating at full capacity to ensure an adequate supply of gasoline and diesel fuel for consumers. In addition to refinery production, petroleum supplies are also determined by the adequacy of inventories and the efficiency of the infrastructure in place to deliver products to where they are needed. The lack of spare capacity has reduced the flexibility of the North American refining system to respond to further disruptions. Refiners were asked to provide information on 4 areas of their operations in order for Natural Resources Canada to analyze the short-term outlook for petroleum products markets. The 4 areas included refinery utilization rates and capability to increase production; any planned refinery turnaround that would affect petroleum product supplies; inventory levels compared to levels in previous years; and, any logistical problems that could affect product distribution. A graph depicting the relationship between Canadian production of gasoline and domestic sales clearly illustrated the seasonal nature of gasoline consumption and that production in Canada is much higher than consumption. Canada exports large volumes of gasoline, primarily to the United States eastern seabord from refineries in Atlantic Canada. The trend is similar for diesel fuel. Demand for both gasoline and diesel is expected to continue to grow in 2005 as high prices have had a limited impact on demand growth. In general, the Ontario/Quebec region is short of gasoline and must import gasoline during the summer months to cover the shortfall. It was noted that motorists and homeowners who heat with oil will bear the burden of higher

Basic semantics of product sounds

NARCIS (Netherlands)

Özcan Vieira, E.; Van Egmond, R.

2012-01-01

Product experience is a result of sensory and semantic experiences with product properties. In this paper, we focus on the semantic attributes of product sounds and explore the basic components for product sound related semantics using a semantic differential paradigmand factor analysis. With two

CONSIDERATION OF "VISUAL PRODUCT" AS A NEW PRODUCT EXCEPT FROM ECONOMIC AND GOOD QUALITY IN THE RESPONSIBILITY OF SPORTING PRODUCTS

OpenAIRE

Abdurrahman Kepoğlu

2017-01-01

As it is known, economical products are divided into two main components (goods/services). The developing technology has restructured its geographical position. The storage capability of sporting products makes it necessary to define the concept of "visual product". In our study, the general scanning model, which is one of the descriptive research methods, is used (Karasar 2009). In the frame of this descriptive scanning method, a theoretical-analytical method has been used focusing on writin...

Buyer-vendor coordination for fixed lifetime product with quantity discount under finite production rate

Science.gov (United States)

Zhang, Qinghong; Luo, Jianwen; Duan, Yongrui

2016-03-01

Buyer-vendor coordination has been widely addressed; however, the fixed lifetime of the product is seldom considered. In this paper, we study the coordination of an integrated production-inventory system with quantity discount for a fixed lifetime product under finite production rate and deterministic demand. We first derive the buyer's ordering policy and the vendor's production batch size in decentralised and centralised systems. We then compare the two systems and show the non-coordination of the ordering policies and the production batch sizes. To improve the supply chain efficiency, we propose quantity discount contract and prove that the contract can coordinate the buyer-vendor supply chain. Finally, we present analytically tractable solutions and give a numerical example to illustrate the benefits of the proposed quantity discount strategy.

Challenges for renewable hydrogen production

International Nuclear Information System (INIS)

Levin, D.B.; Chahine, R.

2009-01-01

The increasing demand for H 2 for heavy oil upgrading, desulfurization and upgrading of conventional petroleum, and for production of ammonium, in addition to the projected demand for H 2 as a transportation fuel and portable power, will require H 2 production on a massive scale. Increased production of H 2 by current technologies will consume greater amounts of conventional hydrocarbons (primarily natural gas) which in turn will generate greater greenhouse gas emissions. Production of H 2 from renewable sources derived from agricultural or other waste streams offers the possibility to contribute to the production capacity with lower or no net greenhouse gas emissions (without carbon sequestration technologies), increasing the flexibility and improving the economics of distributed and semi-centralized reforming. Electrolysis, thermo-catalytic, and biological production can be easily adapted to on-site decentralized production of H 2 , circumventing the need to establish a large and costly distribution infrastructure. Each of these H 2 production technologies, however, faces technical challenges, including conversion efficiencies, feedstock type, and the need to safely integrate H 2 production systems with H 2 purification and storage technologies. These issues are being addressed by H2CAN, a recently launched NSERC funded national strategic network in hydrogen production, purification, storage, infrastructure and safety. (author)

Dry alcohol production plant

Directory of Open Access Journals (Sweden)

Stanković Mirjana S.

2003-01-01

Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

Hydrogen production by Cyanobacteria

Directory of Open Access Journals (Sweden)

Chaudhuri Surabhi

2005-12-01

Full Text Available Abstract The limited fossil fuel prompts the prospecting of various unconventional energy sources to take over the traditional fossil fuel energy source. In this respect the use of hydrogen gas is an attractive alternate source. Attributed by its numerous advantages including those of environmentally clean, efficiency and renew ability, hydrogen gas is considered to be one of the most desired alternate. Cyanobacteria are highly promising microorganism for hydrogen production. In comparison to the traditional ways of hydrogen production (chemical, photoelectrical, Cyanobacterial hydrogen production is commercially viable. This review highlights the basic biology of cynobacterial hydrogen production, strains involved, large-scale hydrogen production and its future prospects. While integrating the existing knowledge and technology, much future improvement and progress is to be done before hydrogen is accepted as a commercial primary energy source.

Exposure from consumer products

International Nuclear Information System (INIS)

Sadagopan, Geetha

1998-01-01

Consumer products containing radioactive material, are available in the market place to any member of public as off the shelf item and are intended for unrestricted use by them at home or for their personal use. Radioactivity may be involved in the product for several reasons: 1. ionising radiation from the radioactive material forms the basis of the particular functioning of the product like radioisotopes in smoke detectors, radio-luminous dials, etc.; 2. chemical/spectroscopic characteristics of the radioactive material and not its radioactivity is the basis for the functional property of the product like thoriated gas mantles, uranium in glass enamels, etc. and 3. radioactive materials could be naturally occurring in consumer products, but could increase in concentration after processing like increased uranium or thorium concentrations after the processing of rare earth oxides

USING DEMATEL-ANP INTEGRATED APPROACH FOR DECIDING PRODUCTION STRATEGY FOR A PRODUCTION LINE

Directory of Open Access Journals (Sweden)

Sinan APAK

2017-09-01

Full Text Available Production planning includes push, pull and hybrid production systems that production firms determine their production strategies according to many variables before starting production. The administration of this process requires experience and time. The intensity of rivalry makes this kind of decision processes important, because no firm has the luxury to waste time and to make a wrong decision. In order to solve this problem, research proposes to use integrated decision-making trial and evaluation laboratory (DEMATEL and analytic network process (ANP together which are methods of multi-criteria decision-making models. The process being used to establish which options are found to be most acceptable for operations managers has been demonstrated how applicable it is by using the generated model in automotive industry.

Product Portfolio Management Best Practices For New Product Development: A Review Of Models

Directory of Open Access Journals (Sweden)

Doorasamy Mishelle

2017-02-01

Full Text Available The survival of any industrial organization depends on whether producing goods or services hinge on how innovative they have become in managing their product portfolio to craft new products that changes with the ever-changing tastes and needs of their customers. This study delves in to the models and theories that drive product portfolio management practices in a way that they support the successes of new product development. Our review is based on selected studies at the frontier of product management, summarized, and compared based on authors experiences, subsisting models, and theories with the results purely based on qualitative rather than quantitative approaches. The essence is to explore possible new theory or model in this field of research.

Micro-Foundations of Product Interfaces and Their Implications on Product and Organization Design

DEFF Research Database (Denmark)

Donmez, Mehmet; Hsuan, Juliana

2016-01-01

by interfaces in addition to structural interdependencies. Our theoretical reasoning illustrates that the differentiation and integration role of interfaces and the functional and structural interdependencies managed by product interfaces inform three interface properties: structural thickness, functional......Despite the importance of product interfaces for product development organizations, little is known about how product interfaces manage component interdependencies. In order to answer this question, we make one of the initial attempts to define micro-foundational interface properties by building...... on and extending the seminal works of Simon (1962) and Parnas (1972) on which the literature on modularity and product architecture is built. Rather than being simple linkages, we show that interfaces exhibit a core-periphery structure by underlining the importance of functional interdependencies managed...

How product trial changes quality perception of four new processed beef products

DEFF Research Database (Denmark)

Saeed, Faiza; Grunert, Klaus G; Therkildsen, Margrethe