Energy integration on multi-periods and multi-usages for hybrid electric and thermal powertrains

International Nuclear Information System (INIS)

Dimitrova, Zlatina; Maréchal, François

2015-01-01

The improvement of the efficiency of vehicle energy systems promotes an active search to find innovative solutions during the design process. This requires more accurate modeling of complex systems, which offers new ways to improve the design efficiency of energy systems. The vehicle is a highly dynamic system. The size and the efficiency of the convertors are dependent on the dynamic driving profile. In order to increase the energy efficiency, using energy integration techniques, an adapted methodology is required to choose the best points for the integrated system design. The idea is to clusterize the dynamic profile on typical multi-periods of the vehicle use. The energy system design is then optimized for these typical multi-periods. In this article a new methodology is applied on hybrid electric vehicles, in order to define the energy integrated powertrain configuration of the vehicle. The energy recovery potential of a single stage Organic Rankine Cycle for a thermal engine in combination with a hybrid electric powertrain is assessed for different drive cycles profiles and comfort situations. After the energy integration, a multi-objective optimization is applied to define the optimal design of a hybrid electric vehicle with a waste heat recovery system. - Highlights: • K-means algorithm transforms the dynamic driving profile on static multi-periods. • The clusters represent the typical powertrain use and size the heat recovery utility. • The maximal heat recovery potential on thermal powertrains is 11% for urban driving. • The maximal heat recovery potential on hybrid electric powertrains is 5%. • Engine downsizing increases heat recovery potential on hybrid electric powertrains

Spin transport through electric field modulated graphene periodic ferromagnetic barriers

International Nuclear Information System (INIS)

Sattari, F.; Faizabadi, E.

2014-01-01

Using the transfer matrix method, the spin transmission coefficient and the spin conductivity are studied theoretically through the monolayer and bilayer graphene periodic ferromagnetic barriers modulated by a homogeneous electric field. The spin conductivity of the systems has an oscillatory behavior with respect to the external electric field which depends on the spin state of electron. In addition, the oscillation amplitude of the spin conductivity and spin polarization increase by increasing the number of barriers, but for a monolayer system with number of barriers greater than thirty, also for a bilayer system with the number of barriers greater than four, the oscillation amplitude does not change significantly. Our probes show that for bilayer system unlike monolayer structure the highest value of spin polarization achieved can be 1 or (−1). So, for designing spintronic devices, bilayer graphene is more efficient

Incorporating residual temperature and specific humidity in predicting weather-dependent warm-season electricity consumption

Science.gov (United States)

Guan, Huade; Beecham, Simon; Xu, Hanqiu; Ingleton, Greg

2017-02-01

Climate warming and increasing variability challenges the electricity supply in warm seasons. A good quantitative representation of the relationship between warm-season electricity consumption and weather condition provides necessary information for long-term electricity planning and short-term electricity management. In this study, an extended version of cooling degree days (ECDD) is proposed for better characterisation of this relationship. The ECDD includes temperature, residual temperature and specific humidity effects. The residual temperature is introduced for the first time to reflect the building thermal inertia effect on electricity consumption. The study is based on the electricity consumption data of four multiple-street city blocks and three office buildings. It is found that the residual temperature effect is about 20% of the current-day temperature effect at the block scale, and increases with a large variation at the building scale. Investigation of this residual temperature effect provides insight to the influence of building designs and structures on electricity consumption. The specific humidity effect appears to be more important at the building scale than at the block scale. A building with high energy performance does not necessarily have low specific humidity dependence. The new ECDD better reflects the weather dependence of electricity consumption than the conventional CDD method.

Periodic variations of atmospheric electric field on fair weather conditions at YBJ, Tibet

Science.gov (United States)

Xu, Bin; Zou, Dan; Chen, Ben Yuan; Zhang, Jin Ye; Xu, Guo Wang

2013-05-01

Observations of atmospheric electric field on fair weather conditions from the plateau station, YBJ, Tibet (90°31‧50″ E, 30°06‧38″ N), over the period from 2006 to 2011, are presented in this work. Its periodic modulations are analyzed in frequency-domain by Lomb-Scargle Periodogram method and in time-domain by folding method. The results show that the fair weather atmospheric electric field intensity is modulated weakly by annual cycle, solar diurnal cycle and its several harmonic components. The modulating amplitude of annual cycle is bigger than that of solar diurnal cycle. The annual minimum/maximum nearly coincides with spring/autumn equinox. The detailed spectrum analysis show that the secondary peaks (i.e. sidereal diurnal cycle and semi-sidereal diurnal cycle) nearly disappear along with their primary peaks when the primary signals are subtracted from electric field data sequence. The average daily variation curve exhibits dual-fluctuations, and has obviously seasonal dependence. The mean value is bigger in summer and autumn, but smaller in spring and winter. The daytime fluctuation is affected by the sunrise and sunset effect, the occurring time of which have a little shift with seasons. However, the nightly one has a great dependence on season conditions.

Prediction of electric energy consumption in Cuba for the period 2000-2015; Pronostico del consumo de electricidad en Cuba durante el periodo 2000-2015

Energy Technology Data Exchange (ETDEWEB)

Garcia Rodirguez, B [Centro Nacional de Seguridad Nuclear, La Habana (Cuba)

1999-06-01

This paper consists on a prediction of the growth in electric energy consumption in Cuba, for the period 2000-2015 and with respect to 1990, it also considers the specific features of the National Electroenergetic System. Validated Guidelines in accordance with the Delphi method, which incorporates the basis characteristics considered by international programs for these predictions, were used for this purpose. From the analysis of the behaviour in power consumption of the different consumers and of the expected changes in them according to the expected scenarios, a prediction on the growth in the demand of electric energy is made.

Enhanced transmission of transverse electric waves through periodic arrays of structured subwavelength apertures

DEFF Research Database (Denmark)

Xiao, Sanshui; Peng, Liang; Mortensen, Asger

2010-01-01

Transmission through sub-wavelength apertures in perfect metals is expected to be strongly suppressed. However, by structural engineering of the apertures, we numerically demonstrate that the transmission of transverse electric waves through periodic arrays of subwavelength apertures in a thin...... metallic film can be significantly enhanced. Based on equivalent circuit theory analysis, periodic arrays of square structured subwavelength apertures are obtained with a 1900-fold transmission enhancement factor when the side length a of the apertures is 10 times smaller than the wavelength (a/λ =0...

Research on minimum sound specifications for hybrid and electric vehicles

Science.gov (United States)

2012-06-30

This report documents research by the National Highway Traffic Safety Administration (NHTSA) to identify ways : to develop sound specifications for electric and hybrid vehicles. The research was conducted to support activities : related to the implem...

Standard technical specifications for General Electric boiling water reactors

International Nuclear Information System (INIS)

1979-08-01

This Standard Technical Specification (STS) has been structured for the broadest possible use on General Electric plants currently being reviewed for an Operating License. Optional specifications are provided for those features and systems which may be included in individual plant designs but are not generic in their scope of application. This revision of the GE-STS does not typically include requirements which may be added or revised as a result of the NRC staff's further review of the Three Mile Island incident

Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

Energy Technology Data Exchange (ETDEWEB)

O`Connell, L.J. [ed.

1994-12-01

An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

REDUCTION IN ELECTRICITY SUPPLIES DURING 'LIMITED POWER' PERIODS IN WINTER 1999-2000

CERN Multimedia

Mario Batz/TCR

1999-01-01

As in previous years, CERN signed contracts with EDF (Electricité de France) and with EOS (Energie Ouest Suisse), by which it undertakes, in return for special prices, to reduce its electricity consumption when the grids are at peak demand during the tariff period 'Effacement Jour de Pointe' (EJP).The contractual period for compulsory load shedding begins 1st November and ends 31st March. During these five months CERN will have to reduce its power consumption from210 MW to 40 MW during twenty-two 18-hour periods, each beginning at 7 a.m. and ending at 1 a.m. the following day. Notice will be given by EDF to the Technical Control Room (TCR) at 5 p.m. the previous day. The notice period may be reduced to two hours for days following weekends and public holidays, or omitted entirely for technical reasons.For the month of March 2000, the limit of power consumption will be increased from 40 MW to 50 MW to guarantee an easier start-up of the accelerators.During these periods, the PS complex, the SPS and ...

Electrical properties of phosphorene systems doped with fourth-period elements

Science.gov (United States)

Wang, Ke; Wang, Hai; Zhang, Min; Liu, Yan; Zhao, Wei

2018-05-01

In this work, we use a first-principles calculation to investigate the structure, binding energies, and electrical properties of monolayer phosphorene systems doped with fourth-period main group elements at a doping concentration of 6.25%. The calculation results reveal that, although large deformations exist, all doped systems are stable and non-spin polarized. In addition, the Ca, Se, and Br atoms are electron acceptors in the doped systems, whereas the Ga, Ge and As atoms are donors. Thus, there is an ionic bonding character between the dopants and neighboring phosphorus atoms in the Ca-, Ga-, Ge-, As-, Se-, and Br-doped systems. From band structures, we find that the K-, Ga-, As-, and Br-doped systems present semiconducting states with indirect gaps, whereas the Ca-, Ge-, and Se-doped systems have metallic states. We conclude that the metallicity of a phosphorene system doped with main-group elements depends on the number of valence electrons of the dopant. This investigation provides directions for manipulating the electrical properties of phosphorene by substitutional doping, which would broaden its possible applications in optoelectronics.

Standard Technical Specifications, General Electric plants, BWR/4

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/4, and documents the positions of the Nuclear Regulatory Commission based on the BWR Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power specifications. This report contains three volumes. This document, Volume 2, contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS

Nonlinear analysis of field distribution in electric motor with periodicity conditions

Energy Technology Data Exchange (ETDEWEB)

Stabrowski, M M; Sikora, J

1981-01-01

Numerical analysis of electromagnetic field distribution in linear motion tubular electric motor has been performed with the aid of finite element method. Two Fortran programmes for the solution of DBBF and BF large linear symmetric equation systems have been developed for purposes of this analysis. A new iterative algorithm, taking into account iron nonlinearity and periodicity conditions, has been introduced. Final results of the analysis in the form of induction diagrammes and motor driving force are directly useful for motor designers.

VDE-specification for electrical equipment and apparatus in atmospheres endangered by explosive material

International Nuclear Information System (INIS)

1976-02-01

These specifications are valid for the setting-up, changing, putting into operation and developing of electrical equipment, as well as for the application of electrical apparatus in such systems and in regions endangered by explosive materials. (orig./LH) [de

Projection of electrical demand in Argentina for the period from 1993 through 2010 mark of economic reform

International Nuclear Information System (INIS)

Goni, Margarita R.; Gonzalez, Enrique

1996-01-01

A projection of electrical demand for two different scenarios has been presented . The period 1993-2010 is analysed and 1993 has been taken as base year. In this study MAED program was used as well as all available information from INDEC (National Statistical Body), CAMMESA (Electrical Market Company) and Ministry of Economy. The results in the base year achieved an accuracy higher than 98%. The scenarios described different rates of growth and electrical energy uses

Standard Technical Specifications, General Electric Plants, BWR/6

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/4, and documents the positions of the Nuclear Regulatory Commission based on the BWR Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3, contains the Bases for Sections 3.4--3.10 of the improved STS

Standard Technical Specifications, General Electric plants, BWR/4

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/6, and documents the positions of the Nuclear Regulatory Commission based on the B ampersand W Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. This document Volume 3, contains the Bases for Sections 3.4--3.10 of the improved STS

Standard Technical Specifications, General Electric plants, BWR/6

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/6, and documents the positions of the Nuclear Regulatory Commission based on the B ampersand W Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. This document Volume 2, contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.10 of the improved STS

Standard Technical Specifications, General Electric Plants, BWR/6

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/6, and documents the positions of the Nuclear Regulatory Commission based on the B ampersand W Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. This document Volume 1, contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.10 of the improved STS

Standard Technical Specifications, General Electric plants, BWR/4

International Nuclear Information System (INIS)

1992-09-01

This NUREG contains improved Standard Technical Specifications (STS) for General Electric Plants, BWR/6, and documents the positions of the Nuclear Regulatory Commission based on the BWR Owners Group's proposed STS. This document is the result of extensive technical meetings and discussions among the NRC staff, the Nuclear Steam Supply System (NSSS) Owners Groups, the NSSS vendors, and the Nuclear Management and Resources Council (NUMARC). The improved STS were developed based on the criteria in the interim Commission Policy Statement on Technical Specification Improvements for Nuclear Power Reactors, dated February 6, 1987. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. This document Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.10 of the improved STS

Reduction of electricity comsumption during 'high cost' periods in winter 2005 - 2006

CERN Multimedia

Mario Batz

2005-01-01

In previous years CERN was able to limit its electricity consumption during the winter months sufficiently to be supplied from the Swiss grid. In order to make enough power available for the LHC machine and experiments at the lowest possible cost during the coming winter 2005 / 2006 CERN is supplied from the French grid by EDF (Electricité de France). As a consequence, when the grids are at peak demand during the tariff period 'Effacement Jour de Pointe' (EJP) in France, the energy price is at least four times as high as for the usual winter period. From 1st November until 31st March these increased prices are applicable during twenty-two 18-hour periods, each beginning at 7 a.m. and ending at 1 a.m. the following day. Notice will be given by EDF to the Technical Infrastructure Control Room (TI) at 5 p.m. the previous day. The notice period may be reduced to two hours for days following weekends and public holidays, or omitted entirely for technical reasons. During these days of EJP CERN has a strong fina...

Reduction of electricity comsumption during 'high cost' periods in winter 2005 - 2006

CERN Document Server

Mario Batz

2005-01-01

In previous years CERN was able to sufficiently limit its electricity consumption during the winter months to be supplied from the Swiss grid. In order to make enough power available for the LHC machine and experiments at the lowest possible cost during the coming winter 2005 / 2006, CERN will be supplied from the French grid by EDF (Electricité de France). As a consequence, when the grids are at peak demand during the tariff period 'Effacement Jour de Pointe' (EJP) in France, the energy price is at least four times higher than for the usual winter period. From 1st November until 31st March these increased prices are applicable during twenty-two 18-hour periods, each beginning at 7 a.m. and ending at 1 a.m. the following day. Notice will be given by EDF to the Technical Infrastructure Control Room (TI) at 5 p.m. the previous day. The notice period may be reduced to two hours for days following weekends and public holidays, or omitted entirely for technical reasons. During these days of EJP CERN has a stro...

The Myotonic Plot Thickens: Electrical Myotonia in Antimuscle-Specific Kinase Myasthenia Gravis

Directory of Open Access Journals (Sweden)

Marcus Magnussen

2015-01-01

Full Text Available Electrical myotonia is known to occur in a number of inherited and acquired disorders including myotonic dystrophies, channelopathies, and metabolic, toxic, and inflammatory myopathies. Yet, electrical myotonia in myasthenia gravis associated with antibodies against muscle-specific tyrosine kinase (MuSK has not been previously reported. We describe two such patients, both of whom had a typical presentation of proximal muscle weakness with respiratory failure in the context of a significant electrodecrement in repetitive nerve stimulation. In both cases, concentric needle examination revealed electrical myotonia combined with myopathic motor unit morphology and early recruitment. These findings suggest that MuSK myasthenia should be included within the differential diagnosis of disorders with electrical myotonia.

Standard technical specifications: General Electric plants, BWR/4. Volume 1, Revision 1: Specifications

International Nuclear Information System (INIS)

1995-04-01

This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for General Electric BWR/4 Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.10 of the improved STS

Region-specific study of the electric utility industry: problem identification, analysis, and recommendations

International Nuclear Information System (INIS)

Pochan, M.J.

1985-07-01

A number of problems were identified that could stand in the way of maintaining an adequate, reliable and economic supply of electric power for the United States in the future. The problems were analyzed by studying a specific region, VACAR (Virginia-Carolinas), in some detail. It was concluded that the future power supply is in jeopardy, but that drastic changes in the present system of investor-owned utilities, specifically, deregulation or government ownership, were not justified. It was recommended that the present electric system be modified and strengthened to meet future needs. 2 refs., 8 figs., 15 tabs

Region-specific study of the electric utility industry: problem identification, analysis, and recommendations

Energy Technology Data Exchange (ETDEWEB)

Pochan, M.J.

1985-07-01

A number of problems were identified that could stand in the way of maintaining an adequate, reliable and economic supply of electric power for the United States in the future. The problems were analyzed by studying a specific region, VACAR (Virginia-Carolinas), in some detail. It was concluded that the future power supply is in jeopardy, but that drastic changes in the present system of investor-owned utilities, specifically, deregulation or government ownership, were not justified. It was recommended that the present electric system be modified and strengthened to meet future needs. 2 refs., 8 figs., 15 tabs.

Periodic local MP2 method employing orbital specific virtuals

International Nuclear Information System (INIS)

Usvyat, Denis; Schütz, Martin; Maschio, Lorenzo

2015-01-01

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

Periodic local MP2 method employing orbital specific virtuals

Energy Technology Data Exchange (ETDEWEB)

Usvyat, Denis, E-mail: denis.usvyat@chemie.uni-regensburg.de; Schütz, Martin, E-mail: martin.schuetz@chemie.uni-regensburg.de [Institute for Physical and Theoretical Chemistry, Universität Regensburg, Universitätsstraße 31, D-93040 Regensburg (Germany); Maschio, Lorenzo, E-mail: lorenzo.maschio@unito.it [Dipartimento di Chimica, and Centre of Excellence NIS (Nanostructured Interfaces and Surfaces), Università di Torino, via Giuria 5, I-10125 Torino (Italy)

2015-09-14

We introduce orbital specific virtuals (OSVs) to represent the truncated pair-specific virtual space in periodic local Møller-Plesset perturbation theory of second order (LMP2). The OSVs are constructed by diagonalization of the LMP2 amplitude matrices which correspond to diagonal Wannier-function (WF) pairs. Only a subset of these OSVs is adopted for the subsequent OSV-LMP2 calculation, namely, those with largest contribution to the diagonal pair correlation energy and with the accumulated value of these contributions reaching a certain accuracy. The virtual space for a general (non diagonal) pair is spanned by the union of the two OSV sets related to the individual WFs of the pair. In the periodic LMP2 method, the diagonal LMP2 amplitude matrices needed for the construction of the OSVs are calculated in the basis of projected atomic orbitals (PAOs), employing very large PAO domains. It turns out that the OSVs are excellent to describe short range correlation, yet less appropriate for long range van der Waals correlation. In order to compensate for this bias towards short range correlation, we augment the virtual space spanned by the OSVs by the most diffuse PAOs of the corresponding minimal PAO domain. The Fock and overlap matrices in OSV basis are constructed in the reciprocal space. The 4-index electron repulsion integrals are calculated by local density fitting and, for distant pairs, via multipole approximation. New procedures for determining the fit-domains and the distant-pair lists, leading to higher efficiency in the 4-index integral evaluation, have been implemented. Generally, and in contrast to our previous PAO based periodic LMP2 method, the OSV-LMP2 method does not require anymore great care in the specification of the individual domains (to get a balanced description when calculating energy differences) and is in that sense a black box procedure. Discontinuities in potential energy surfaces, which may occur for PAO-based calculations if one is not

Bloch electrons in 2D periodic electric and magnetic fields; Bloch-Elektronen in 2D periodischen elektrischen und magnetischen Feldern

Energy Technology Data Exchange (ETDEWEB)

Naundorf, B.

2001-06-01

The following topics were dealt with: electrons in periodic potentials, Bloch states, Landau states, wave packets, Harper equation, uncoupled Landau band states, matrix elements and matrix equations, periodic electric and magnetic fields (WL)

Evaluation of Waterford Steam Electric Station Unit 3 technical specifications

International Nuclear Information System (INIS)

Baxter, D.E.; Bruske, S.J.

1985-09-01

This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the Waterford Steam Electric Station Unit 3 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the requirements of the Final Safety Analysis Report (FSAR) as amended, and the requirements of the Safety Evaluation Report (SER) as supplemented. A comparative audit of the FSAR as amended, and the SER as supplemented was performed with the Waterford T/S. Several discrepancies were identified and subsequently resolved by the cognizant NRC reviewer. Pending completion of the resolutions noted in Part 3 of this report, the Waterford Steam Electric Station Unit 3 T/S, to the extent reviewed, are in conformance with the FSAR and SER

Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining and exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.

Tailoring of the electrical and thermal properties using ultra-short period non-symmetric superlattices

Directory of Open Access Journals (Sweden)

Paulina Komar

2016-10-01

Full Text Available Thermoelectric modules based on half-Heusler compounds offer a cheap and clean way to create eco-friendly electrical energy from waste heat. Here we study the impact of the period composition on the electrical and thermal properties in non-symmetric superlattices, where the ratio of components varies according to (TiNiSnn:(HfNiSn6−n, and 0 ⩽ n ⩽ 6 unit cells. The thermal conductivity (κ showed a strong dependence on the material content achieving a minimum value for n = 3, whereas the highest value of the figure of merit ZT was achieved for n = 4. The measured κ can be well modeled using non-symmetric strain relaxation applied to the model of the series of thermal resistances.

Selection of strategy for electric power engineering development in Russia for period up to 2015

International Nuclear Information System (INIS)

Khainson, Ya.I.; Mirkovskaya, R.E.; Artem'eva, N.Yu.

1993-01-01

The result of studies, in which an attempt to select a number of real versions for development of electric power engineering for the period up to 2015, as well as to evaluate, compare and select essentially stable trends is made, are discussed. It is shown that these trends remain actual even under market economics conditions. The necessity is emphasized for creation and introduction of new generation of units and electric power plants ecologically clean, reliable and operating in wide unit capacity range. Special attention should be paid to creation of new types of NPPs, underground NPPs as well as low-and intermediate-capacity NPPs necessary for many regions of the country

Design, Specification, and Synthesis of Aircraft Electric Power Systems Control Logic

Science.gov (United States)

Xu, Huan

Cyber-physical systems integrate computation, networking, and physical processes. Substantial research challenges exist in the design and verification of such large-scale, distributed sensing, actuation, and control systems. Rapidly improving technology and recent advances in control theory, networked systems, and computer science give us the opportunity to drastically improve our approach to integrated flow of information and cooperative behavior. Current systems rely on text-based specifications and manual design. Using new technology advances, we can create easier, more efficient, and cheaper ways of developing these control systems. This thesis will focus on design considerations for system topologies, ways to formally and automatically specify requirements, and methods to synthesize reactive control protocols, all within the context of an aircraft electric power system as a representative application area. This thesis consists of three complementary parts: synthesis, specification, and design. The first section focuses on the synthesis of central and distributed reactive controllers for an aircraft elec- tric power system. This approach incorporates methodologies from computer science and control. The resulting controllers are correct by construction with respect to system requirements, which are formulated using the specification language of linear temporal logic (LTL). The second section addresses how to formally specify requirements and introduces a domain-specific language for electric power systems. A software tool automatically converts high-level requirements into LTL and synthesizes a controller. The final sections focus on design space exploration. A design methodology is proposed that uses mixed-integer linear programming to obtain candidate topologies, which are then used to synthesize controllers. The discrete-time control logic is then verified in real-time by two methods: hardware and simulation. Finally, the problem of partial observability and

Effect of electric field on the performance of soil electro-bioremediation with a periodic polarity reversal strategy.

Science.gov (United States)

Mena, E; Villaseñor, J; Cañizares, P; Rodrigo, M A

2016-03-01

In this work, it is studied the effect of the electric fields (within the range 0.0-1.5 V cm(-1)) on the performance of electrobioremediation with polarity reversal, using a bench scale plant with diesel-spiked kaolinite with 14-d long tests. Results obtained show that the periodic changes in the polarity of the electric field results in a more efficient treatment as compared with the single electro-bioremediation process, and it does not require the addition of a buffer to keep the pH within a suitable range. The soil heating was not very important and it did not cause a change in the temperature of the soil up to values incompatible with the life of microorganisms. Low values of water transported by the electro-osmosis process were attained with this strategy. After only 14 d of treatment, by using the highest electric field studied in this work (1.5 V cm(-1)), up to 35.40% of the diesel added at the beginning of the test was removed, value much higher than the 10.5% obtained by the single bioremediation technology in the same period. Copyright © 2015 Elsevier Ltd. All rights reserved.

A highly specific test for periodicity

International Nuclear Information System (INIS)

Ansmann, Gerrit

2015-01-01

We present a method that allows to distinguish between nearly periodic and strictly periodic time series. To this purpose, we employ a conservative criterion for periodicity, namely, that the time series can be interpolated by a periodic function whose local extrema are also present in the time series. Our method is intended for the analysis of time series generated by deterministic time-continuous dynamical systems, where it can help telling periodic dynamics from chaotic or transient ones. We empirically investigate our method's performance and compare it to an approach based on marker events (or Poincaré sections). We demonstrate that our method is capable of detecting small deviations from periodicity and outperforms the marker-event-based approach in typical situations. Our method requires no adjustment of parameters to the individual time series, yields the period length with a precision that exceeds the sampling rate, and its runtime grows asymptotically linear with the length of the time series

A highly specific test for periodicity

Energy Technology Data Exchange (ETDEWEB)

Ansmann, Gerrit, E-mail: gansmann@uni-bonn.de [Department of Epileptology, University of Bonn, Sigmund-Freud-Straße 25, 53105 Bonn (Germany); Helmholtz Institute for Radiation and Nuclear Physics, University of Bonn, Nussallee 14–16, 53115 Bonn (Germany); Interdisciplinary Center for Complex Systems, University of Bonn, Brühler Straße 7, 53175 Bonn (Germany)

2015-11-15

We present a method that allows to distinguish between nearly periodic and strictly periodic time series. To this purpose, we employ a conservative criterion for periodicity, namely, that the time series can be interpolated by a periodic function whose local extrema are also present in the time series. Our method is intended for the analysis of time series generated by deterministic time-continuous dynamical systems, where it can help telling periodic dynamics from chaotic or transient ones. We empirically investigate our method's performance and compare it to an approach based on marker events (or Poincaré sections). We demonstrate that our method is capable of detecting small deviations from periodicity and outperforms the marker-event-based approach in typical situations. Our method requires no adjustment of parameters to the individual time series, yields the period length with a precision that exceeds the sampling rate, and its runtime grows asymptotically linear with the length of the time series.

Data-based method for creating electricity use load profiles using large amount of customer-specific hourly measured electricity use data

International Nuclear Information System (INIS)

Raesaenen, Teemu; Voukantsis, Dimitrios; Niska, Harri; Karatzas, Kostas; Kolehmainen, Mikko

2010-01-01

The recent technological developments monitoring the electricity use of small customers provides with a whole new view to develop electricity distribution systems, customer-specific services and to increase energy efficiency. The analysis of customer load profile and load estimation is an important and popular area of electricity distribution technology and management. In this paper, we present an efficient methodology, based on self-organizing maps (SOM) and clustering methods (K-means and hierarchical clustering), capable of handling large amounts of time-series data in the context of electricity load management research. The proposed methodology was applied on a dataset consisting of hourly measured electricity use data, for 3989 small customers located in Northern-Savo, Finland. Information for the hourly electricity use, for a large numbers of small customers, has been made available only recently. Therefore, this paper presents the first results of making use of these data. The individual customers were classified into user groups based on their electricity use profile. On this basis, new, data-based load curves were calculated for each of these user groups. The new user groups as well as the new-estimated load curves were compared with the existing ones, which were calculated by the electricity company, on the basis of a customer classification scheme and their annual demand for electricity. The index of agreement statistics were used to quantify the agreement between the estimated and observed electricity use. The results indicate that there is a clear improvement when using data-based estimations, while the new-estimated load curves can be utilized directly by existing electricity power systems for more accurate load estimates.

Data-based method for creating electricity use load profiles using large amount of customer-specific hourly measured electricity use data

Energy Technology Data Exchange (ETDEWEB)

Raesaenen, Teemu; Niska, Harri; Kolehmainen, Mikko [Department of Environmental Sciences, University of Eastern Finland P.O. Box 1627, FIN-70211 Kuopio (Finland); Voukantsis, Dimitrios; Karatzas, Kostas [Department of Mechanical Engineering, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece)

2010-11-15

The recent technological developments monitoring the electricity use of small customers provides with a whole new view to develop electricity distribution systems, customer-specific services and to increase energy efficiency. The analysis of customer load profile and load estimation is an important and popular area of electricity distribution technology and management. In this paper, we present an efficient methodology, based on self-organizing maps (SOM) and clustering methods (K-means and hierarchical clustering), capable of handling large amounts of time-series data in the context of electricity load management research. The proposed methodology was applied on a dataset consisting of hourly measured electricity use data, for 3989 small customers located in Northern-Savo, Finland. Information for the hourly electricity use, for a large numbers of small customers, has been made available only recently. Therefore, this paper presents the first results of making use of these data. The individual customers were classified into user groups based on their electricity use profile. On this basis, new, data-based load curves were calculated for each of these user groups. The new user groups as well as the new-estimated load curves were compared with the existing ones, which were calculated by the electricity company, on the basis of a customer classification scheme and their annual demand for electricity. The index of agreement statistics were used to quantify the agreement between the estimated and observed electricity use. The results indicate that there is a clear improvement when using data-based estimations, while the new-estimated load curves can be utilized directly by existing electricity power systems for more accurate load estimates. (author)

Testing and development of electric vehicle batteries for EPRI Electric Transportation Program

Science.gov (United States)

1985-11-01

Argonne National Laboratory conducted an electric-vehicle battery testing and development program for the Electric Power Research Institute. As part of this program, eighteen battery modules previously developed by Johnson Controls, Inc. were tested. This type of battery (EV-2300 - an improved state-of-the-art lead-acid battery) was designed specifically for improved performance, range, and life in electric vehicles. In order to obtain necessary performance data, the batteries were tested under various duty cycles typical of normal service. This program, supported by the Electric Power Research Institute, consisted of three tasks: determination of the effect of cycle life vs peak power and rest period, determination of the impact of charge method on cycle life, and evaluation of the EV-2300 battery system. Two supporting studies were also carried out: one on thermal management of electric-vehicle batteries and one on enhanced utilization of active material in lead-acid batteries.

Weak interactions in Graphane/BN systems under static electric fields—A periodic ab-initio study.

Science.gov (United States)

Steinkasserer, Lukas Eugen Marsoner; Gaston, Nicola; Paulus, Beate

2015-04-21

Ab-initio calculations via periodic Hartree-Fock (HF) and local second-order Møller-Plesset perturbation theory (LMP2) are used to investigate the adsorption properties of combined Graphane/boron nitride systems and their response to static electric fields. It is shown how the latter can be used to alter both structural as well as electronic properties of these systems.

Descriptive Study of Occupational Accidents and their Causes among Electricity Distribution Company Workers at an Eight-year Period in Iran

Science.gov (United States)

Rahmani, Abdolrasoul; Khadem, Monireh; Madreseh, Elham; Aghaei, Habib-Allah; Raei, Mehdi; Karchani, Mohsen

2013-01-01

Background Occupational accidents are unplanned events that cause damage. The socio-economic impacts and human costs of accidents are tremendous around the world. Many fatalities happen every year in workplaces such as electricity distribution companies. Some electrical injuries are electrocution, electric shock, and burns. This study was conducted in an electricity distribution company (with rotational 12-hour shift work) in Iran during an 8-year period to survey descriptive factors of injuries. Methods Variables collected included accident time, age of injured worker, employment type, work experience, injury cause, educational background, and other information about accidents. Results Results indicated that most of the accidents occurred in summer, and 51.3% were during shift work. Worker negligence (malpractice) was the cause of 75% of deaths. Type of employment had a significant relationship with type of injuries (p safety was related to job experiences. Temporary workers have no chance to work all year like permanent workers, therefore impressive experiences may be less in them. Because the lack of protective equipment and negligence are main causes of accidents, periodical inspections in workshops are necessary. PMID:24106647

Transition from steady to periodic liquid-metal magnetohydrodynamic flow in a sliding electrical contact

Science.gov (United States)

Talmage, Gita; Walker, John S.; Brown, Samuel H.; Sondergaard, Neal A.

1993-09-01

In homopolar motors and generators, large dc electric currents pass through the sliding electrical contacts between rotating copper disks (rotors) and static copper surfaces shrouding the rotor tips (stators). A liquid metal in the small radial gap between the rotor tip and concentric stator surface can provide a low-resistance, low-drag electrical contact. Since there is a strong magnetic field in the region of the electrical contacts, there are large electromagnetic body forces on the liquid metal. The primary, azimuthal motion consists of simple Couette flow, plus an electromagnetically driven flow with large extremes of the azimuthal velocity near the rotor corners. The secondary flow involves the radial and axial velocity components, is driven by the centrifugal force associated with the primary flow, and is opposed by the electromagnetic body force, so that the circulation varies inversely as the square of the magnetic-field strength. Three flow regimes are identified as the angular velocity Ω of the rotor is increased. For small Ω, the primary flow is decoupled from the secondary flow. As Ω increases, the secondary flow begins to convect the azimuthal-velocity peaks radially outward, which in turn changes the centrifugal force driving the secondary flow. At some critical value of Ω, the flow becomes periodic through the coupling of the primary and secondary flows. The azimuthal-velocity peaks begin to move radially in and out with an accompanying oscillation in the secondary-flow strength.

Large-Scale Battery System Development and User-Specific Driving Behavior Analysis for Emerging Electric-Drive Vehicles

Directory of Open Access Journals (Sweden)

Yihe Sun

2011-04-01

Full Text Available Emerging green-energy transportation, such as hybrid electric vehicles (HEVs and plug-in HEVs (PHEVs, has a great potential for reduction of fuel consumption and greenhouse emissions. The lithium-ion battery system used in these vehicles, however, is bulky, expensive and unreliable, and has been the primary roadblock for transportation electrification. Meanwhile, few studies have considered user-specific driving behavior and its significant impact on (PHEV fuel efficiency, battery system lifetime, and the environment. This paper presents a detailed investigation of battery system modeling and real-world user-specific driving behavior analysis for emerging electric-drive vehicles. The proposed model is fast to compute and accurate for analyzing battery system run-time and long-term cycle life with a focus on temperature dependent battery system capacity fading and variation. The proposed solution is validated against physical measurement using real-world user driving studies, and has been adopted to facilitate battery system design and optimization. Using the collected real-world hybrid vehicle and run-time driving data, we have also conducted detailed analytical studies of users’ specific driving patterns and their impacts on hybrid vehicle electric energy and fuel efficiency. This work provides a solid foundation for future energy control with emerging electric-drive applications.

Optical Frequency Mixing in Periodically-Patterned and in Quasi-Periodically-Patterned Nonlinear media

International Nuclear Information System (INIS)

Arie, A.

1999-01-01

Nonlinear frequency mixing processes, e.g. second harmonic generation, sum and difference frequency generation, etc., require matching of the phases of the interacting waves. The traditional method to achieve it is by selecting a specific angle of propagation in a birefringent nonlinear crystal. The main limitation of the birefringent phase matching method stems from the fact that for many interesting interactions, the phase matching condition cannot be satisfied in a specific crystal. This obstacle can be removed by the technique of quasi-phase-matching (QPM), where the nonlinear coefficient of the material is modulated at a fixed spatial frequency that equals the wave-vector phase mismatch between the interacting waves. An important development in recent years is the ability to periodically reverse the sign of the nonlinear coefficient in ferroelectric crystals by applying a high electric field through a periodic electrode. Some recent QPM interactions in periodically-poled KTP that were recently achieved at Tel-Aviv University include continuous-wave optical parametric oscillations, as well as generation of tunable mid-infrared radiation by difference frequency generation. Periodic patterning of the nonlinear coefficient enables to phase match only a single interaction. It would be advantageous to further extend the applications of this technique in order to simultaneously satisfy several interactions on a single crystal. This cannot be usually achieved in a periodic pattern, however more sophisticated quasi-periodic structures can be designed in this case. An interesting analogy can be drawn between artificially-made quasi-periodically-patterned nonlinear crystals and quasi-crystals found in nature, in rapidly-cooled metallic alloys

Multi-Period Optimization Model for Electricity Generation Planning Considering Plug-in Hybrid Electric Vehicle Penetration

Directory of Open Access Journals (Sweden)

Lena Ahmadi

2015-05-01

Full Text Available One of the main challenges for widespread penetration of plug-in hybrid electric vehicles (PHEVs is their impact on the electricity grid. The energy sector must anticipate and prepare for this extra demand and implement long-term planning for electricity production. In this paper, the additional electricity demand on the Ontario electricity grid from charging PHEVs is incorporated into an electricity production planning model. A case study pertaining to Ontario energy planning is considered to optimize the value of the cost of the electricity over sixteen years (2014–2030. The objective function consists of the fuel costs, fixed and variable operating and maintenance costs, capital costs for new power plants, and the retrofit costs of existing power plants. Five different case studies are performed with different PHEVs penetration rates, types of new power plants, and CO2 emission constraints. Among all the cases studied, the one requiring the most new capacity, (~8748 MW, is assuming the base case with 6% reduction in CO2 in year 2018 and high PHEV penetration. The next highest one is the base case, plus considering doubled NG prices, PHEV medium penetration rate and no CO2 emissions reduction target with an increase of 34.78% in the total installed capacity in 2030. Furthermore, optimization results indicate that by not utilizing coal power stations the CO2 emissions are the lowest: ~500 tonnes compared to ~900 tonnes when coal is permitted.

A glucose concentration and temperature sensor based on long period fiber gratings induced by electric-arc discharge

Science.gov (United States)

Du, Chao; Wang, Qi

2017-10-01

As one of the key parameters in biological and chemical reactions, glucose concentration objectively reflects the characteristics of reactions, so the real-time monitoring of glucose concentration is important in the field of biochemical. Meanwhile, the influence from temperature should be considered. The fiber sensors have been studied extensively for decades due to the advantages of small size, immunity to electromagnetic interference and high sensitivity, which are suitable for the application of biochemical sensing. A long period fiber grating (LPFG) sensor induced by electric-arc discharge has been fabricated and demonstrated for simultaneous measurement of glucose concentration and temperature. The proposed sensor was fabricated by inscribing a sing mode fiber (SMF) with periodic electric-arc discharge technology. During the fabrication process, the electric-arc discharge technology was produced by a commercial fusion splicer, and the period of inscribed LPFG was determined by the movement of translation stages. A serials of periodic geometrical deformations would be formed in SMF after the fabrication, and the discharge intensity and discharge time can be adjusted though the fusion splicer settings screen. The core mode can be coupled into the cladding modes at certain wavelength when they satisfy the phase-matching conditions, and there will be several resonance dips in the transmission spectrum in LPFG. The resonance dips formed by the coupling between cladding modes and core mode have different sensitivity responses, so the simultaneous measurement for multi-parameter can be realized by monitoring the wavelength shifts of the resonance dips. Compared with the LPFG based on conventional SMF, the glucose concentration sensitivity has been obviously enhanced by etching the cladding with hydrofluoric acid solution. Based on the independent measured results, a dual-parameter measurement matrix has been built for signal demodulation. Because of the easy

Electrical conductivity testing of corn seeds as influenced by temperature and period of storage

OpenAIRE

Fessel,Simone Aparecida; Vieira,Roberval Daiton; Cruz,Mara Cristina Pessoa da; Paula,Rinaldo Cesar de; Panobianco,Maristela

2006-01-01

The objective of this work was to evaluate the effects of temperature (10, 20, 30, 20/10 and 30/10ºC) and period of storage on electrical conductivity (EC) in four seed lots of corn (Zea mays L.), as well as the mineral composition of the soaking solution. EC test determines indirectly the integrity of seed membrane systems, and is used for the assessment of seed vigor, because this test detects the seed deterioration process since its early phase. The research comprised determinations o...

RENEWABLE ENERGY SOURCES IN ELECTRIC-POWER IN-DUSTRY OF BELARUS

Directory of Open Access Journals (Sweden)

M. M. Oleshkevich

2014-01-01

Full Text Available The paper investigates technical and economic indices (specific capital inputs, construction period, pay-off period, possible economically substantiated generation of electric power of electric power plants using renewable energy sources under climatic conditions ofBelarus. The indices have been compared with the data of nuclear power engineering. The most efficient directions are wind and biomass power engineering. In accordance with its technical and economic and ecological indices the biomass power engineering is more profitable than nuclear, hydro- and solar power engineering.

Magneto-Induced ac Electrical Permittivity of Metal-Dielectric Composites with a Two Characteristic Length Scales Periodic Microstructure

International Nuclear Information System (INIS)

Strelniker, Y.M.; Bergman, D.J.

1998-01-01

A new effect was recently predicted in conducting composites that have a periodic microstructure: an induced strongly anisotropic dc magneto-resistance. This phenomenon is already verified on high mobility n-GaAs films. Here we discuss the possibility of observing analogous behavior in the ac electric permittivity of a metal-dielectric composite with a periodic microstructure in the presence of a strong magnetic field. We developed new analytical and numerical methods to treat the low-frequency magneto-optical properties in composite media with both disordered and periodic conducting micro-structures. Those methods allow us to study composites with inclusions of arbitrary shape (and arbitrary volume fraction) at arbitrarily strong magnetic field. This is exploited in order to calculate an effective dielectric tensor for this system as a function of applied magnetic field and ac frequency. We show that in a non-dilute metal-dielectric composite medium the magneto-plasma resonance and the cyclotron resonance depend upon both the applied magnetic field as well as on the geometric shape of the inclusion. Near such a resonance, it is possible to achieve large values for the ratio of the off-diagonal-to-diagonal electric permittivity tensor components, ε xy /ε xx , (since ε xx →0, while ε xy ≠0), which is analogous to similar ratio of the resistivity tensor components, ρ xy /ρ xx , in the case of dc magneto-transport problem. Motivated by this observation and by results of previous studies of dc magneto-transport in composite conductors, we then performed a numerical study of the ac magneto-electric properties of a particular metal-dielectric composite film with a periodic columnar microstructure which has a two characteristic length scales. The unit cell of such composite is prepared as follows: We placed the conducting square (in cross section) rods (first characteristic length scale) along the perimeter of the unit cell in order to create a dielectric host

Analysis of licensee event reports related to nuclear generating station onsite electrical system malfunctions, 1976-1978

International Nuclear Information System (INIS)

Bickel, J.H.; Abbott, E.C.

1981-07-01

This report summarizes the evaluation requested by the ACRS of 1177 LERS, submitted over a three year period, which related to onsite electrical system malfunctions. The evaluation was carried out for the purposes of identifying specific failure modes and consequences, evaluating the assumptions used in WASH-1400 on the reliability of electrical equipment, and identifying specific sequences which are significant to plant safety. The analysis performed provides a more specific identification of onsite electrical system failure modes, sequences, and consequences than was established in WASH-1400

Theoretical Foundation for Electric-Dipole-Allowed Chiral-Specific Fluorescence Optical Rotary Dispersion (F-ORD) from Interfacial Assemblies.

Science.gov (United States)

Deng, Fengyuan; Ulcickas, James R W; Simpson, Garth J

2016-11-03

Fluorescence optical rotary dispersion (F-ORD) is proposed as a novel chiral-specific and interface-specific spectroscopic method. F-ORD measurements of uniaxial assemblies are predicted to be fully electric-dipole-allowed, with corresponding increases in sensitivity to chirality relative to chiral-specific measurements in isotropic assemblies that are commonly interpreted through coupling between electric and magnetic dynamic dipoles. Observations of strong chiral sensitivity in prior single-molecule fluorescence measurements of chiral interfacial molecules are in excellent qualitative agreement with the predictions of the F-ORD mechanism and challenging to otherwise explain. F-ORD may provide methods to suppress background fluorescence in studies of biological interfaces, as the detected signal requires both polar local order and interfacial chirality. In addition, the molecular-level descriptions of the mechanisms underpinning F-ORD may also potentially apply to aid in interpreting chiral-specific Raman and surface-enhanced Raman spectroscopy measurements of uniaxially oriented assemblies, opening up opportunities for chiral-specific and interface-specific vibrational spectroscopy.

Region-specific study of the electric utility industry: financial history and future power requirements for the VACAR region

International Nuclear Information System (INIS)

Pochan, M.J.

1985-07-01

Financial data for the period 1966 to 1981 are presented for the four investor-owned electric utilities in the VACAR (Virginia-Carolinas) region. This region was selected as representative for the purpose of assessing the availability, reliability, and cost of electric power for the future in the United States. The estimated demand for power and planned additions to generating capacity for the region through the year 2000 are also given

Segmentation of electric energy customers by specific niches; Segmentacao de clientes de energia eletrica por nichos especiais

Energy Technology Data Exchange (ETDEWEB)

Silva, Ana Lucia Rodrigues da; Jannuzzi, Gilberto de Martino [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)], E-mail: jannuzzi@fen.unicamp.br

2009-04-15

The article presents the classic segmentation used in electric energy industry for large customers. The paper argues the limitations of this classification, as well as, the potentialities to classify customers for specific niches, the example of that already occurs in other competitive sectors of the economy. Twelve potential forms for classifying large customers in electricity industry are presented: geographic localization; value of the invoice; sector of productive activity; types of share holding composition and enterprise management; forms and characteristics of the use of the electric energy in the final units; degree of technological sophistication; client relation cost benefit; common factors in energy process of purchase; brand associated with the customer; extraordinary factors, such as, urgency, application and volume of energy; personal characteristics of the purchaser in charge of the operation; former-customers who moved from the captive market to the free market and vice versa. The article concludes proposing a new methodology to identify the specific niches of customers in the electric sector, as well as the inductive and restrictive factors of this methodology. (author)

The integration of the periodic production in the liberalized electric power markets: from the technic expenditures to the economic taxes imposed by the operating rules of the markets

International Nuclear Information System (INIS)

Menanteau, Ph.; Finon, D.; Lamy, M.L.

2003-03-01

In the framework of the climatic change and the energy supply safety, the european directive aims to promote the renewable energy production in Europe. Some of the renewable energy sources, as the wind power or the micro-hydroelectric power, are naturally periodic. Their introduction in the electric networks will create problems because of this periodic nature, problems which are new for the electric network producers and managers. These problems generate technical expenditures, which may be compensate by the economic penalties of the electric power market operating. In this context the document details the expenditures associated to the periodicity, the economic penalties by an analysis of the british market and analyses the possibilities to limit these economic penalties in order to reduce the conflicts between the electric market liberalization and the promotion of the renewable energies development. (A.L.B.)

The role of specific features of the electronic structure in electrical resistivity of band ferromagnets Co2Fe Z ( Z = Al, Si, Ga, Ge, In, Sn, Sb)

Science.gov (United States)

Kourov, N. I.; Marchenkov, V. V.; Perevozchikova, Yu. A.; Weber, H. W.

2017-05-01

The electrical resistivity ρ( T) of the band ferromagnets Co2FeZ (where Z = Al, Si, Ga, Ge, In, Sn, and Sb are s- and p-elements of Mendeleev's Periodic Table) has been investigated in the temperature range 4.2 K < T < 1100 K. It has been shown that the dependences ρ( T) of these alloys in a magnetically ordered state at temperatures T < T C are predominantly determined by the specific features of the electronic spectrum in the vicinity of the Fermi level. The processes of charge carrier scattering affect the behavior of the electrical resistivity ρ( T) only in the vicinity of the Curie temperature T C and above, as well as in the low-temperature range (at T ≪ T C).

Electricity market models and RES integration: The Greek case

International Nuclear Information System (INIS)

Simoglou, Christos K.; Biskas, Pandelis N.; Vagropoulos, Stylianos I.; Bakirtzis, Anastasios G.

2014-01-01

This paper presents an extensive analysis of the Greek electricity market for the next 7-year period (2014–2020) based on an hour-by-hour simulation considering five different RES technologies, namely wind, PV, small hydro, biomass and CHP with emphasis on PV integration. The impact of RES penetration on the electricity market operation is evaluated under two different models regarding the organization of the Greek wholesale day-ahead electricity market: a mandatory power pool for year 2014 (current market design) and a power exchange for the period 2015–2020 (Target Model). An integrated software tool is used for the simulation of the current and the future day-ahead market clearing algorithm of the Greek wholesale electricity market. Simulation results indicate the impact of the anticipated large-scale RES integration, in conjunction with each market model, on specific indicators of the Greek electricity market in the long-term. - Highlights: • Analysis of the Greek electricity market for the next 7-year period (2014–2020) based on hour-by-hour simulation. • Five different RES technologies are considered with emphasis on PV integration. • A power pool (for 2014) and a power exchange (for 2015–2020) are considered. • Various market indicators are used for the analysis of the impact of the RES integration on the Greek electricity market. • Two alternative tariff schemes for the compensation of the new ground-mounted PV units from 2015 onwards are investigated

Electrically rechargeable zinc/air battery: a high specific energy system

Energy Technology Data Exchange (ETDEWEB)

Holzer, F; Sauter, J -C; Masanz, G; Mueller, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1999-08-01

This contribution describes our research and development efforts towards the demonstration of a light-weight, low-cost 12 V/20 Ah electrically rechargeable Zn/air battery. We successfully developed electrodes having active areas of up to 200 cm{sup 2}. Deep discharge cycles at different currents as well as current-voltage curves are reported for a 10 cell Zn/air battery (serial connection) with a rated capacity of 20 Ah. Based on the discharge cycle at a power of 19 W, and the weight of the battery, a specific energy of more than 90 Wh/kg could be evaluated for the whole system. (author) 4 figs., 1 tab., 5 refs.

Optimal control strategy design for extending all-electric driving capability of plug-in hybrid electric vehicles (PHEVs)

Energy Technology Data Exchange (ETDEWEB)

Williamson, S.S [Concordia Univ., Montreal, PQ (Canada). Dept. of Electrical and Computer Engineering, P.D Ziogas Power Electronics Laboratory

2007-07-01

The high voltage energy storage system in plug-in hybrid electric vehicles (PHEVs) is usually a rechargeable type that service a dual purpose, notably to supplement the power delivered by the internal combustion engine, and to provide partial propulsion energy from an off-board source of electricity. The energy storage devices in electric vehicles typically improve vehicle efficiency through engine downsizing and by recapturing braking energy. However, since PHEVs have the ability to recharge their energy storage systems directly from the power grid, the periods of all-electric operation can be extended, thereby reducing the dependence on the internal combustion engine. This is particularly useful in city driving conditions. Developers of PHEV technology are faced with the challenge of choosing the appropriate energy storage battery in order to improve the all-electric drive range. In this study, control strategies were modeled for specific driving load conditions using the Advanced Vehicle Simulator (ADVISOR) software. This paper presented specific control algorithms for PHEV operation for various city driving loads. The optimal design strategy considered the improvement of critical energy storage parameters, overall drive train efficiency, and vehicle performance characteristics. Future trends in the design and development of PHEV drive trains were also presented. 13 figs.

Change in consumer sensitivity to electricity prices in response to retail deregulation: A panel empirical analysis of the residential demand for electricity in the United States

International Nuclear Information System (INIS)

Nakajima, Tadahiro; Hamori, Shigeyuki

2010-01-01

About ten years have passed since the deregulation of the U.S. retail electricity market, and it is now generally accepted that the available data is adequate to quantitatively assess and compare conditions before and after deregulation. This study, therefore, estimates the changes in price elasticity in the residential electricity market to examine the changes, if any, in household sensitivity (as a result of retail electricity market deregulation policies) to residential electricity rates. Specifically, six types of panel data are prepared, based on three cross-sections-all states (except for Alaska and Hawaii) and the District of Columbia, deregulated states, and non-deregulated states-and two time series-the period before deregulation and the period after deregulation. The panel empirical analysis techniques are used to determine whether or not the variables are stationary, and to estimate price elasticity. We find that there is no substantial difference in the price elasticity between deregulated and non-deregulated states for both periods-before deregulation and after deregulation. Thus, it can be said that the deregulation of the retail electricity market has not made consumers more sensitive to electricity rates and that retail deregulation policies are not the cause of price elasticity differences between deregulated and non-deregulated states.

Change in consumer sensitivity to electricity prices in response to retail deregulation. A panel empirical analysis of the residential demand for electricity in the United States

Energy Technology Data Exchange (ETDEWEB)

Nakajima, Tadahiro [The Kansai Electric Power Company, Incorporated, 6-16, Nakanoshima 3-chome, Kita-Ku, Osaka 530-8270 (Japan); Hamori, Shigeyuki [Faculty of Economics, Kobe University 2-1, Rokkodai, Nada-Ku, Kobe 657-8501 (Japan)

2010-05-15

About ten years have passed since the deregulation of the U.S. retail electricity market, and it is now generally accepted that the available data is adequate to quantitatively assess and compare conditions before and after deregulation. This study, therefore, estimates the changes in price elasticity in the residential electricity market to examine the changes, if any, in household sensitivity (as a result of retail electricity market deregulation policies) to residential electricity rates. Specifically, six types of panel data are prepared, based on three cross-sections - all states (except for Alaska and Hawaii) and the District of Columbia, deregulated states, and non-deregulated states - and two time series - the period before deregulation and the period after deregulation. The panel empirical analysis techniques are used to determine whether or not the variables are stationary, and to estimate price elasticity. We find that there is no substantial difference in the price elasticity between deregulated and non-deregulated states for both periods - before deregulation and after deregulation. Thus, it can be said that the deregulation of the retail electricity market has not made consumers more sensitive to electricity rates and that retail deregulation policies are not the cause of price elasticity differences between deregulated and non-deregulated states. (author)

Lessons Learned "Establishing an Electrically Safe Work Condition" Specifically related to Racking Electrical Breakers

Energy Technology Data Exchange (ETDEWEB)

Martinez, Tommy Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Romero, Philbert Roland [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Garcia, Samuel Anthony [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-09

During low voltage electrical equipment maintenance, a bad breaker was identified. The breaker was racked out from the substation cubicle without following the hazardous energy control process identified in the Integrated Work Document (IWD). The IWD required the substation to be in an electrically safe work condition prior to racking the breaker. Per NFPA 70E requirements, electrical equipment shall be put into an electrically safe work condition before an employee performs work on or interacts with equipment in a manner that increases the likelihood of creating an arc flash. Racking in or out a breaker on an energized bus may increase the likelihood of creating an arc flash dependent on equipment conditions. A thorough risk assessment must be performed prior to performing such a task. The risk assessment determines the risk control measures to be put in place prior to performing the work. Electrical Safety Officers (ESO) can assist in performing risk assessments and incorporating risk control measures.

Propulsion element requirements using electrical power system unscheduled power

Science.gov (United States)

Zimmermann, Frank; Hodge, Kathy

1989-01-01

The suitability of using the electrical energy from the Space Station's Electrical Power System (EPS) during the periods of peak solar insolation which is currently not specifically allocated (unscheduled power) to produce propulsion propellants, gaseous hydrogen, and oxygen by electrolyzing water is investigated. Reboost propellant requirements are emphasized, but the results are more generally relevant because the balance of recurring propellant requirements are an order of magnitude smaller and the nonrecurring requirements are not significant on an average basis.

A methodology for Electric Power Load Forecasting

Directory of Open Access Journals (Sweden)

Eisa Almeshaiei

2011-06-01

Full Text Available Electricity demand forecasting is a central and integral process for planning periodical operations and facility expansion in the electricity sector. Demand pattern is almost very complex due to the deregulation of energy markets. Therefore, finding an appropriate forecasting model for a specific electricity network is not an easy task. Although many forecasting methods were developed, none can be generalized for all demand patterns. Therefore, this paper presents a pragmatic methodology that can be used as a guide to construct Electric Power Load Forecasting models. This methodology is mainly based on decomposition and segmentation of the load time series. Several statistical analyses are involved to study the load features and forecasting precision such as moving average and probability plots of load noise. Real daily load data from Kuwaiti electric network are used as a case study. Some results are reported to guide forecasting future needs of this network.

Technical Specifications, Comanche Peak Steam Electric Station, Unit 1 (Docket No. 50-445)

International Nuclear Information System (INIS)

1990-04-01

The Technical Specifications for Comanche Peak Steam Electric Station, Unit 1 were prepared by the US Nuclear Regulatory Commission. They set forth the limits, operating conditions, and other requirements applicable to a nuclear reactor facility, as set forth in Section 50.36 of Title 10 of the Code of Federal Regulations Part 50, for the protection of the health and safety of the public

Overview Of Planning Direction Of Nuclear Power Development In Vietnam In The Period Up To 2030

International Nuclear Information System (INIS)

Ta Van Huong; Tran Hong Nguyen

2011-01-01

Research for peaceful application of nuclear energy, in general, and in particular, for construction of nuclear power plants (NPP) in Vietnam is urgent for social-economic development and for meeting the increasing national electrical demand in future. The expected plan for developing NPPs in Vietnam is defined in the Planning Direction of Nuclear Power Development in Vietnam in the period up to 2030. In according to which, NPPs have been planned in selected sites by the period depends on the detailed conditions of each site, as well as on specification of the national electrical grid. The present report reviews the highlights of this Planning Direction of Nuclear Power Development in Vietnam in the period up to 2030. (author)

Solar PV electricity and market characteristics: two Canadian case-studies

International Nuclear Information System (INIS)

Rowlands, I.H.

2005-01-01

To determine whether solar electricity (that is, electricity generated by photovoltaics) is, on an average, more valuable - in market terms - than the electricity generated in power systems as a whole, this article investigates the extent to which solar resource availability in two Canadian locations is associated with peak electricity market demand and peak electricity market price. More specifically, solar radiation and electricity market data for the period 1 May 2002 to 30 April 2004 are examined for Calgary, Alta. and Guelph, Ont. A variety of visual and statistical investigations reveal that solar radiation values coincide closely with peak electricity market demand and, though to a somewhat lesser extent, peak electricity market prices during the summertime in each location. While more detailed investigation is needed in order to determine the specific impact of different levels of PV penetration upon provincial electricity markets, the article provides ample encouragement for further research. The article also shows how different techniques can be used-in any location-to investigate the relationship among solar electricity potential, system-wide demand and market prices. With electricity industries being restructured around the world, it continues to be important for solar energy proponents to participate in discussions regarding economic costs and benefits. Techniques used in this article can help them advance the solar electricity case more effectively and thus catalyse the deployment of photovoltaics in markets around the world. (author)

Standard technical specifications General Electric plants, BWR/6. Volume 1, Revision 1

International Nuclear Information System (INIS)

1995-04-01

This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for General Electric BWR/6 Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.10 of the improved STS

Positive impact of electric vehicle and ngv on environment

International Nuclear Information System (INIS)

Shahidul I Khan; Kannan, K.S.; Md Shah Majid

1999-01-01

Electric Vehicle uses electricity from batteries as fuel and is environment friendly with zero emission. The occurrence of haze in 1997 in Malaysia and neighbouring countries has called for new studies about motor vehicle emission as it aggravates the problem. In big cities like Kuala Lumpur, Penang and Johor Bahru where it is estimated that over 300,000 vehicles enter the city everyday, smoke pollution from vehicles is identified as the major contributor to air quality. One of the solutions to air pollution problem could be the use of Electric Vehicles (EV) and Natural Gas for Vehicle (NGV). The NGV uses compressed natural gas mainly methane, is lead free and clean burning with low emission. The electric vehicles use batteries as power source. These batteries are charged off-peak hour, specifically after mid-night when the electric load curve has its least demand period. The number of electric vehicles and NGV in future years is calculated considering the penetration level. The reduction in pollution is estimated considering the number of automobiles replaced by electric vehicles and NGV. Finally, it is concluded that EV and NGV could be the ultimate solution for pollution control and could improve the environment specifically that of congested cities of Malaysia. (Author)

Specific heat and electric conductivity of zirconium alloy with 2,5 mass% niobium in the range of phase transitions

International Nuclear Information System (INIS)

Roshchupkin, V.V.; Pokrasin, M.A.; Chernov, A.I.; Semashko, N.A.

1996-01-01

Experimental investigation of specific heat and electric resistance of zirconium alloy with 2.5 mass% niobium in the range of phase transitions was conducted, using adiabatic calorimeter of original design, characterized by high sensitivity, efficiency and high accuracy. It was revealed that temperature dependence of specific heat was characterized by anomalous growth at 590 deg C, related with (α+β Nb )→(α+β Zr )-transition, and at 810 deg -related with (α+β Zr )→β Zr - transition. Temperature dependence of electric resistance was specific in the region of α+β Zr →β Zr phase transition. It was established that revealed anomalies were connected with high oxygen absorption at high temperatures. 11 refs., 1 fig., 1 tab

Realistic generation cost of solar photovoltaic electricity

International Nuclear Information System (INIS)

Singh, Parm Pal; Singh, Sukhmeet

2010-01-01

Solar photovoltaic (SPV) power plants have long working life with zero fuel cost and negligible maintenance cost but requires huge initial investment. The generation cost of the solar electricity is mainly the cost of financing the initial investment. Therefore, the generation cost of solar electricity in different years depends on the method of returning the loan. Currently levelized cost based on equated payment loan is being used. The static levelized generation cost of solar electricity is compared with the current value of variable generation cost of grid electricity. This improper cost comparison is inhibiting the growth of SPV electricity by creating wrong perception that solar electricity is very expensive. In this paper a new method of loan repayment has been developed resulting in generation cost of SPV electricity that increases with time like that of grid electricity. A generalized capital recovery factor has been developed for graduated payment loan in which capital and interest payment in each installment are calculated by treating each loan installment as an independent loan for the relevant years. Generalized results have been calculated which can be used to determine the cost of SPV electricity for a given system at different places. Results show that for SPV system with specific initial investment of 5.00 cents /kWh/year, loan period of 30 years and loan interest rate of 4% the levelized generation cost of SPV electricity with equated payment loan turns out to be 28.92 cents /kWh, while the corresponding generation cost with graduated payment loan with escalation in annual installment of 8% varies from 9.51 cents /kWh in base year to 88.63 cents /kWh in 30th year. So, in this case, the realistic current generation cost of SPV electricity is 9.51 cents /kWh and not 28.92 cents /kWh. Further, with graduated payment loan, extension in loan period results in sharp decline in cost of SPV electricity in base year. Hence, a policy change is required

Specific features in the behavior of electrical resistivity of the pine biocarbon preform/copper composite

Science.gov (United States)

Burkov, A. T.; Orlova, T. S.; Smirnov, B. I.; Smirnov, I. A.; Misiorek, H.; Jezowski, A.

2010-11-01

The electrical resistivity ρ( T) of the novel type of composites prepared by infiltrating melted copper in vacuum in empty sap channels of white pine high-porosity biocarbon preforms has been measured in the temperature range 5-300 K. Biocarbon preforms have been prepared by pyrolysis of tree wood in an argon flow at two carbonization temperatures, 1000 and 2400°C. The electrical resistivity of the composites has been found to vary relatively weakly with temperature and to pass through a characteristic minimum near 40-50 K, which can be ascribed to iron and manganese impurities penetrating into copper from the carbon preform when liquid copper is infiltrated into it. It has been shown that the electrical resistivity ρ( T) of the composites is governed primarily by the specific microstructure of the preform, which is made up of parallel channels with an average diameter of about 50 μm interrupted by systems of thin capillaries. The small cross section of the copper-filled capillaries accounts for these regions providing the major contribution to the electrical resistivity of the composites. An increase in the wood carbonization temperature brings about a noticeable increase in the effective capillary cross section and a decrease in the electrical resistivity ρ( T) of the composite.

Results of evaluation of periodic safety review for No. 1 plant in Mihama Power Station, Kansai Electric Power Co., Inc

International Nuclear Information System (INIS)

1994-01-01

No. 1 plant in Mihama Power Station started the commercial power generation in November, 1970, and has continued the operation for more than 23 years. During this period, the counter measures to troubles, periodic inspections and the maintenance by the electric power company have been carried out. These states of No. 1 plant in Mihama Power Station for more than 23 years are to be recollected from the view-points of the comprehensive evaluation of operation experiences and the reflection of latest technological knowledge, and the safety and reliability are to be further improved in the periodic safety review. Agency of Natural Resources and Energy evaluated the report of the periodic safety review for No. 1 plant in Mihama Power Station made by Kansai Electric Power Co., and summarized the results. The course of the evaluation of the report is shown. The facility utilization factor is 43.3% on the average of about 23 years, but in the last 10 years, it was improved to 69.4%. In the last five years, the rate of occurrence of unexpected shutoff was 0.6 times/year. These are the results of preventive maintenance and the improvement of the facilities and operation management. Operation management, maintenance management, fuel management, radiation control, and radioactive waste management have been carried out properly. The work plan for preventing disasters was established, and the experience of troubles and the latest technological knowledge were well reflected to improve the safety. (K.I.)

Certain laws governing the influence of high molecular polymer additives on specific electrical conductivity and viscosity of zincate alkaline solution

Energy Technology Data Exchange (ETDEWEB)

Dmitrenko, V.Ye.; Toropetsera, T.N.; Zubov, M.S.

1983-01-01

A study was made of the influence of polymer additives of different nature: polyelectrolyte, copolymer of ethylene with maleic anhydride, polymethacrylic acid and nonpolyectrolyte copolymer of vinyl alcohol with vinyleneglycol and polyvinyleneglycol on specific electrical conductance and viscosity of the zincate alkaline solution. It is indicated that with an increase in the content of additives, the specific conductance of the solution diminishes according to a linear law, while the viscosity rises. The additives of polyelectrolyte nature reduce more strongly the specific conductance and increase the viscosity than the nonpolyelectrolyte additives. From a comparison of the data on specific conductance and viscosity the following conclusion is drawn: the more the polymer ''structures'' the zincate alkaline solution, the more strongly it reduces its specific electrical conductance.

Non-conventional rule of making a periodically varying different-pole magnetic field in low-power alternating current electrical machines with using ring coils in multiphase armature winding

Science.gov (United States)

Plastun, A. T.; Tikhonova, O. V.; Malygin, I. V.

2018-02-01

The paper presents methods of making a periodically varying different-pole magnetic field in low-power electrical machines. Authors consider classical designs of electrical machines and machines with ring windings in armature, structural features and calculated parameters of magnetic circuit for these machines.

Electricity mix and ecological assessments. Consequences of the choice of specific electricity mixes in analyses of the environmental performance of products and services

International Nuclear Information System (INIS)

Menard, M.; Dones, R.; Gantner, U.

1998-12-01

The study aims at analysing the methodological issues associated with the definition of electricity mixes and discussing the consequences of the choice of specific electricity mixes in analyses of the environmental performance of products and services, based on Life Cycle Assessment (LCA). This report has been designed as a guideline to support LCA practitioners in the systematic identification of the most appropriate electricity mixes for LCA applications. A detailed checklist has been developed for this purpose. It includes the following items: type of electricity supply (from the net, self production, direct contracts); voltage level; country/place of utilisation; year of utilisation; season/daytime of utilisation; import/export model; and, marginal vs. average approach. A few examples, utilising published LCA studies, illustrate the impacts of the insights gained in the present work. Although primarily aimed at applications in Switzerland, the main concepts, the modelling and parts of the information provided can also be applied to other European countries. In addition to the three models proposed earlier for the assessment of the Swiss yearly average electricity mix, a new model (M4) has been developed in the frame of the present task in order to take into account the conditions characteristic for Switzerland as a transit land for electricity trades between its neighbour countries. All existing electricity mix models as well as selected environmental inventories are described and compared in the report. As an example of results, the CO 2 emissions calculated for the Swiss yearly electricity supply mix are relatively small (48 g/kWh with model M4, as compared with 497 g/kWh for the average UCPTE mix). Key information on the structure of electricity generation and trade in Europe is provided. The modelling of the electricity supply for most of the European countries is less sensitive to the choice of an electricity model than for Switzerland. Considering that

Distribution of the solute in the lithium niobate crystal grown by the Stepanov method in a periodically changing external electric field

International Nuclear Information System (INIS)

Zhdanov, A.; Nikolayeva, L.; Red'kin, B.

2000-01-01

The Iithium niobate crystals with the periodic domain structure are characterised by the capacity for the light frequency adoption of the laser light. Consequently, they are promising for the development of compact light sources. There are several methods of producing periodic ferroelectric domain structures of the lithium niobate crystals in the growth process. It is evident that the main method of production of the periodic structures in the lithium niobate is the Stepanov method. The development of the mathematical model of the variation of the concentration of the alloying solute with the periodic variation of the conditions of growth of the crystal in the growth of the crystal by the Stepanov methods in the conditions of periodic changes of the drawing rate of the crystal V and the temperature of the thermal junction T have been investigated elsewhere. The formation of the domain structure is also possible in the case of the periodic variation of the electric field, during the supply of the alternating voltage between the shaper and the seed. In this work, we proposed mathematical model discounting the process of formation of the domain structure in the alternating electric field during the growth of the lithium niobate crystal by the Stepanov method. In the mathematical modelling we obtain the numerical solutions of the unidimensional nonstationary problem of the Stepanov type, the diffusion equation for concentration, and the Laplace capillary equation. The proposed mathematical model is at the present and the most complete and accurate description of the variation of the concentration of the solute in the growing crystal. The semi-discrete Galerkin method was used for the equations

Experimental Evaluation of Simple Thermal Storage Control Strategies in Low-Energy Solar Houses to Reduce Electricity Consumption during Grid On-Peak Periods

Directory of Open Access Journals (Sweden)

Kyoung-Ho Lee

2015-08-01

Full Text Available There is growing interest in zero-energy and low-energy buildings, which have a net energy consumption (on an annual basis of almost zero. Because they can generate both electricity and thermal energy through the use of solar photovoltaic (PV and solar thermal collectors, and with the help of reduced building thermal demand, low-energy buildings can not only make a significant contribution to energy conservation on an annual basis, but also reduce energy consumption and peak demand. This study focused on electricity consumption during the on-peak period in a low-energy residential solar building and considers the use of a building’s thermal mass and thermal storage to reduce electricity consumption in summer and winter by modulation of temperature setpoints for heat pump and indoor thermostats in summer and additional use of a solar heating loop in winter. Experiments were performed at a low-energy solar demonstration house that has solar collectors, hot water storage, a ground-coupled heat pump, and a thermal storage tank. It was assumed that the on-peak periods were from 2 pm to 5 pm on hot summer days and from 5 pm to 8 pm on cold winter days. To evaluate the potential for utilizing the building’s thermal storage capacity in space cooling and heating, the use of simple control strategies on three test days in summer and two test days in the early spring were compared in terms of net electricity consumption and peak demand, which also considered the electricity generation from solar PV modules on the roof of the house.

Enantiomer-specific ketorolac pharmacokinetics in young women, including pregnancy and postpartum period

Directory of Open Access Journals (Sweden)

Aida Kulo

2017-02-01

Full Text Available Racemic ketorolac clearance (CL is significantly higher at delivery, but S-ketorolac disposition determines the analgesic effects. The aim of this study was to investigate the effect of pregnancy and postpartum period on enantiomer-specific (S and R intravenous (IV ketorolac pharmacokinetics (PKs. Data in women shortly following cesarean delivery (n=39 were pooled with data in a subgroup of these women that was reevaluated in the later postpartum period (postpartum group, n=8/39 and with eight healthy female volunteers. All women received single IV bolus of 30 mg ketorolac tromethamine. Five plasma samples were collected at 1, 2, 4, 6, and 8 hours and plasma concentrations were determined using high performance liquid chromatography. Enantiomer-specific PKs were calculated using PKSolver. Unpaired analysis showed that distribution volume at steady state (Vss, L/kg for S- and R-ketorolac was significantly higher in women shortly following cesarean delivery (n=31 compared to postpartum group (n=8 or to healthy female volunteers (n=8. CL, CL to body weight, and CL to body surface area (CL/BSA for S- and R-ketorolac were also significantly higher in women following delivery. In addition, S/R-ketorolac CL/BSA ratio was significantly higher at delivery. Paired PK analysis in eight women shortly following delivery and in postpartum group showed the same pattern. Finally, the simultaneous increase in CL and Vss resulted in similar estimates for elimination half-life in both unpaired and paired analysis. In conclusion, pregnancy affects S-, R-, and S/R-ketorolac disposition. This is of clinical relevance since S-ketorolac (analgesia CL is even more increased compared to R-ketorolac CL, and S/R-ketorolac CL ratio is higher following delivery compared to postpartum period or to healthy female volunteers.

High voltage-derived enhancement of electric conduction in nanogap devices for detection of prostate-specific antigen

Science.gov (United States)

Park, Hyung Ju; Chi, Young Shik; Choi, Insung S.; Yun, Wan Soo

2010-07-01

We report a simple method of enhancing electric conductance in nanogap devices without any additional treatments, such as silver-enhancing process. The low electric conductance after selective immobilization of biofunctionalized gold nanoparticles in the gap region was greatly enhanced by repeated I-V scans at relatively high voltage ranges of -5 to 5 V, which was attributed to the formation of a new conduction pathway across the gap. The higher conduction state of the nanogap device showed a very stable I-V curve, which was used as an excellent measure of the existence of prostate-specific antigen.

Applying Nitrogen Site-Specifically Using Soil Electrical Conductivity Maps and Precision Agriculture Technology

Directory of Open Access Journals (Sweden)

E.D. Lund

2001-01-01

Full Text Available Soil texture varies significantly within many agricultural fields. The physical properties of soil, such as soil texture, have a direct effect on water holding capacity, cation exchange capacity, crop yield, production capability, and nitrogen (N loss variations within a field. In short, mobile nutrients are used, lost, and stored differently as soil textures vary. A uniform application of N to varying soils results in a wide range of N availability to the crop. N applied in excess of crop usage results in a waste of the grower’s input expense, a potential negative effect on the environment, and in some crops a reduction of crop quality, yield, and harvestability. Inadequate N levels represent a lost opportunity for crop yield and profit. The global positioning system (GPS-referenced mapping of bulk soil electrical conductivity (EC has been shown to serve as an effective proxy for soil texture and other soil properties. Soils with a high clay content conduct more electricity than coarser textured soils, which results in higher EC values. This paper will describe the EC mapping process and provide case studies of site-specific N applications based on EC maps. Results of these case studies suggest that N can be managed site-specifically using a variety of management practices, including soil sampling, variable yield goals, and cropping history.

Specification of merger gains in the Norwegian electricity distribution industry

International Nuclear Information System (INIS)

Saastamoinen, Antti; Bjørndal, Endre; Bjørndal, Mette

2017-01-01

Electricity distribution often exhibits economies of scale. In Norway, a number of smaller distribution system operators exist and thus there is potential to restructure the industry, possibly through mergers. However, the revenue cap regulatory model in Norway does not incentivize firms to merge as merging leads to a stricter revenue cap for the merged company. Thus the regulator compensates the firms in order to create such incentives. The amount of compensation is based on the potential gains of the merger estimated using a data envelopment analysis (DEA) based frontier approach introduced by Bogetoft and Wang (2005). DEA is however only one of many possible frontier estimators that can be used in estimation. Furthermore, the returns to scale assumption, the operating environment of firms and the presence of stochastic noise and outlier observations are all known to affect to the estimation of production technology. In this paper we explore how varying assumptions under two alternative frontier estimators shape the distribution of merger gains within the Norwegian distribution industry. Our results reveal that the restructuring policies of the industry may be significantly altered depending how potential gains from the mergers are estimated. - Highlights: • The merger gains of Norwegian electricity distribution firm are investigated. • Different estimators and model specifications are applied. • Results show that the gains are significantly affected by the model choice. • Incentives to merge may be shaped through the estimation of gains.

Electricity Use in the Pacific Northwest: Utility Historical Sales by Sector, 1989 and Preceding Years.

Energy Technology Data Exchange (ETDEWEB)

United States. Bonneville Power Administration.

1990-06-01

This report officially releases the compilation of regional 1989 retail customer sector sales data by the Bonneville Power Administration. This report is intended to enable detailed examination of annual regional electricity consumption. It gives statistics covering the time period 1970--1989, and also provides observations based on statistics covering the 1983--1989 time period. The electricity use report is the only information source that provides data obtained from each utility in the region based on the amount of electricity they sell to consumers annually. Data is provided on each retail customer sector: residential, commercial, industrial, direct-service industrial, and irrigation. The data specifically supports forecasting activities, rate development, conservation and market assessments, and conservation and market program development and delivery. All of these activities require a detailed look at electricity use. 25 figs., 34 tabs.

Impact of Spanish electricity mix, over the period 2008–2030, on the Life Cycle energy consumption and GHG emissions of Electric, Hybrid Diesel-Electric, Fuel Cell Hybrid and Diesel Bus of the Madrid Transportation System

International Nuclear Information System (INIS)

García Sánchez, Juan Antonio; López Martínez, José María; Lumbreras Martín, Julio; Flores Holgado, María Nuria; Aguilar Morales, Hansel

2013-01-01

Highlights: • We assess the performance of 4 buses that run on different alternative fuel types and technologies. • The buses assessed are Fuel Cell-Hybrid Bus, Hybrid Diesel-Electric Bus, Battery Electric Bus, and a Diesel Bus. • We examine the environmental impact caused by the Life Cycle of each vehicle technology, fossil fuel and energy carrier. • Life Cycle of Battery Electric Bus shows that it has a big potential of improvement in terms of environmental impact. - Abstract: In spite of the advanced research in automotive technology, and the improvement of fuels, the road transport sector continues to be an environmental concern, since the increase in transport demand is offsetting the effects of these technological improvements. Therefore, this poses the following question: what combination of technology and fuel is more efficient in terms of energy consumption and green house gas (GHG) emissions? To fully address this question it is necessary to carry out a Life Cycle Assessment (LCA). This paper presents a global LCA of 4 buses that run on the following fuel types and technologies: (1) Fuel Cell- Hybrid Bus, (2) Hybrid Diesel-Electric Bus (series configuration), (3) Battery Electric Bus and (4) Combustion Ignition Engine Bus. The impact categories assessed are: primary energy consumption, fossil energy and GHG emissions. Among the principal results, we can conclude that the Global LCA of buses (3) and (1) (which are the more sensitive pathways to the electricity mix variation) have for the 2008–2030 period a room for improvement of 25.62% and 28.16% in terms of efficiency of fossil energy consumption and a potential GHG emission reduction of 28.70% and 30.88% respectively

Nuclear electronic equipment for control and monitoring boards. Specifications and test methods of direct current period meters

International Nuclear Information System (INIS)

Roquefort, Henri; Chapelot; Ramard; Tardif; Tournier; Vaux

1973-11-01

After a few words of introduction, mention of the main notations used and the definition of certain terms, the field of application of the document is outlined and a list of references given. The main specifications of electronic 'direct current period meter' subassemblies for the monitoring, control and safety of nuclear reactors are then defined and the corresponding test methods described. The apparatus measures on a logarithmic scale the neutron fluence rate of a reactor by means of an ionisation chamber and supplies 'period' data relative to the fluence rate variation in time. The specifications and test methods are given for the different components: logarithmic amplifier, time derivative unit, threshold releases, high tension supply for ionisation chamber, auxiliary circuits and finally the complete period meter. (author) [fr

The electricity prices in the European Union. The role of renewable energies and regulatory electric market reforms

International Nuclear Information System (INIS)

Moreno, Blanca; López, Ana J.; García-Álvarez, María Teresa

2012-01-01

The European Union electricity market has been gradually liberalized since 1990s. Theoretically, competitive markets should lead to efficiency gains in the economy thus reducing electricity prices. However, there is a controversial debate about the real effects of the electricity liberalization on electricity prices. Moreover, the increased generation of electricity from renewable energies RES-E (Electricity from Renewable Energy Sources) is also integrated in wholesale market reducing wholesale prices, but the final effect over household prices is not clear. In order to contribute to this debate, this paper provides an empirical investigation into the electricity prices determinants. In fact we develop econometric panel models to explore the relationship between the household electricity prices and variables related to the renewable energy sources and the competition in generation electricity market. More specifically we use a panel data set provided by Eurostat and covering 27 European Union countries during the period 1998–2009. Our results suggest that electricity prices increase with the deployment of RES-E and with the expansion of greenhouse gas emissions produced by energy industries- as a European Union CO 2 emission trading scheme exists. Results also reveal that country's characteristics can affect household electricity prices. -- Highlights: ► Electricity liberalized markets should lead to reduce electricity prices. ► The use of renewable energies (RES) reduce wholesale electricity prices. ► However, household electricity prices are increasing in European Union. ► Panel data models are developed to investigate the effect of RES and electricity competition on household electricity prices. ► We find that the deployment of RES increases prices paid by consumers in a liberalized market.

Diagnosis of electric equipment at the Dalat Nuclear Research Reactor

International Nuclear Information System (INIS)

Nguyen Truong Sinh

1999-01-01

The Dalat Nuclear Research Reactor (DNRR) is a pool type of its kind in the world: Soviet-designed core and control system harmoniously integrated into the left-over infrastructure of the former American-made TRIGA MARK II reactor, which includes the reactor tank and shielding, graphite reflector, beam tubes and thermal column. The reactor is mainly used for radioisotope and radiopharmaceutical production, elemental analysis using neutron activation techniques, neutron beam exploitation, silicon doping, and reactor physics experimentation. For safe operation of the reactor maintenance work has been carried out for the reactor control and instrumentation, reactor cooling, ventilation, radiomonitoring, mechanical, normal electric supply systems as well as emergency electric diesel generators and the water treatment station. Technical management of the reactor includes periodical maintenance as required by technical specifications, training, re-training and control of knowledge for reactor staff. During recent years, periodic preventive maintenance (PPM) has been carried out for the electric machines of the technological systems. (author)

101 Modelling and Forecasting Periodic Electric Load for a ...

African Journals Online (AJOL)

User

2012-01-24

Jan 24, 2012 ... Electricity load consumption in Nigeria is of great concern and its government is ... This is because the energy needed for any system is based on ... is a tool for verifying the validity and reliability of a chosen model. It tells how ...

Evaluation of electric power distribution systems: period 1984/89

International Nuclear Information System (INIS)

Britto Filho, W.A. de; Pinto, V.G.

1992-01-01

The historical evolution of electric power distribution systems in Brazil, during 1984 to 1989 is described, showing the consumer market with the physical expansion of Distribution Networks and the results of quality from the services made by the companies to their clients. (C.G.C.)

Cutting force measurement of electrical jigsaw by strain gauges

International Nuclear Information System (INIS)

Kazup, L; Varadine Szarka, A

2016-01-01

This paper describes a measuring method based on strain gauges for accurate specification of electric jigsaw's cutting force. The goal of the measurement is to provide an overall perspective about generated forces in a jigsaw's gearbox during a cutting period. The lifetime of the tool is affected by these forces primarily. This analysis is part of the research and development project aiming to develop a special linear magnetic brake for realizing automatic lifetime tests of electric jigsaws or similar handheld tools. The accurate specification of cutting force facilitates to define realistic test cycles during the automatic lifetime test. The accuracy and precision resulted by the well described cutting force characteristic and the possibility of automation provide new dimension for lifetime testing of the handheld tools with alternating movement. (paper)

Electricity Generation Baseline Report

Energy Technology Data Exchange (ETDEWEB)

Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcy, Cara [National Renewable Energy Lab. (NREL), Golden, CO (United States); McCall, James [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bloom, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aabakken, Jorn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jenkin, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Porro, Gian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Liu, Chang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ganda, Francesco [Argonne National Lab. (ANL), Argonne, IL (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tarka, Thomas [National Energy Technology Lab. (NETL), Albany, OR (United States); Brewer, John [National Energy Technology Lab. (NETL), Albany, OR (United States); Schultz, Travis [National Energy Technology Lab. (NETL), Albany, OR (United States)

2017-01-01

This report was developed by a team of national laboratory analysts over the period October 2015 to May 2016 and is part of a series of studies that provide background material to inform development of the second installment of the Quadrennial Energy Review (QER 1.2). The report focuses specifically on U.S. power sector generation. The report limits itself to the generation sector and does not address in detail parallel issues in electricity end use, transmission and distribution, markets and policy design, and other important segments. The report lists 15 key findings about energy system needs of the future.

Water-Constrained Electric Sector Capacity Expansion Modeling Under Climate Change Scenarios

Science.gov (United States)

Cohen, S. M.; Macknick, J.; Miara, A.; Vorosmarty, C. J.; Averyt, K.; Meldrum, J.; Corsi, F.; Prousevitch, A.; Rangwala, I.

2015-12-01

Over 80% of U.S. electricity generation uses a thermoelectric process, which requires significant quantities of water for power plant cooling. This water requirement exposes the electric sector to vulnerabilities related to shifts in water availability driven by climate change as well as reductions in power plant efficiencies. Electricity demand is also sensitive to climate change, which in most of the United States leads to warming temperatures that increase total cooling-degree days. The resulting demand increase is typically greater for peak demand periods. This work examines the sensitivity of the development and operations of the U.S. electric sector to the impacts of climate change using an electric sector capacity expansion model that endogenously represents seasonal and local water resource availability as well as climate impacts on water availability, electricity demand, and electricity system performance. Capacity expansion portfolios and water resource implications from 2010 to 2050 are shown at high spatial resolution under a series of climate scenarios. Results demonstrate the importance of water availability for future electric sector capacity planning and operations, especially under more extreme hotter and drier climate scenarios. In addition, region-specific changes in electricity demand and water resources require region-specific responses that depend on local renewable resource availability and electricity market conditions. Climate change and the associated impacts on water availability and temperature can affect the types of power plants that are built, their location, and their impact on regional water resources.

Site-specific Pt deposition and etching on electrically and thermally isolated SiO2 micro-disk surfaces

International Nuclear Information System (INIS)

Saraf, Laxmikant V

2010-01-01

Electrically and thermally isolated surfaces are crucial for improving the detection sensitivity of microelectronic sensors. The site-specific in situ growth of Pt nano-rods on thermally and electrically isolated SiO 2 micro-disks using wet chemical etching and a focused ion/electron dual beam (FIB-SEM) is demonstrated. Fabrication of an array of micro-cavities on top of a micro-disk is also demonstrated. The FIB source is utilized to fabricate through-holes in the micro-disks. Due to the amorphous nature of SiO 2 micro-disks, the Ga implantation possibly modifies through-hole sidewall surface chemistry rather than affecting its transport properties. Some sensor design concepts based on micro-fabrication of SiO 2 micro-disks utilizing thermally and electrically isolated surfaces are discussed from the viewpoint of applications in photonics and bio-sensing.

Muscle fiber type specific induction of slow myosin heavy chain 2 gene expression by electrical stimulation

International Nuclear Information System (INIS)

Crew, Jennifer R.; Falzari, Kanakeshwari; DiMario, Joseph X.

2010-01-01

Vertebrate skeletal muscle fiber types are defined by a broad array of differentially expressed contractile and metabolic protein genes. The mechanisms that establish and maintain these different fiber types vary throughout development and with changing functional demand. Chicken skeletal muscle fibers can be generally categorized as fast and fast/slow based on expression of the slow myosin heavy chain 2 (MyHC2) gene in fast/slow muscle fibers. To investigate the cellular and molecular mechanisms that control fiber type formation in secondary or fetal muscle fibers, myoblasts from the fast pectoralis major (PM) and fast/slow medial adductor (MA) muscles were isolated, allowed to differentiate in vitro, and electrically stimulated. MA muscle fibers were induced to express the slow MyHC2 gene by electrical stimulation, whereas PM muscle fibers did not express the slow MyHC2 gene under identical stimulation conditions. However, PM muscle fibers did express the slow MyHC2 gene when electrical stimulation was combined with inhibition of inositol triphosphate receptor (IP3R) activity. Electrical stimulation was sufficient to increase nuclear localization of expressed nuclear-factor-of-activated-T-cells (NFAT), NFAT-mediated transcription, and slow MyHC2 promoter activity in MA muscle fibers. In contrast, both electrical stimulation and inhibitors of IP3R activity were required for these effects in PM muscle fibers. Electrical stimulation also increased levels of peroxisome-proliferator-activated receptor-γ co-activator-1 (PGC-1α) protein in PM and MA muscle fibers. These results indicate that MA muscle fibers can be induced by electrical stimulation to express the slow MyHC2 gene and that fast PM muscle fibers are refractory to stimulation-induced slow MyHC2 gene expression due to fast PM muscle fiber specific cellular mechanisms involving IP3R activity.

Strategy for development of the Polish electricity sector

Energy Technology Data Exchange (ETDEWEB)

Dybowski, J. [Polish Power Grid Co., Warsaw (Poland)

1995-12-01

This paper represents the strategy for development of the Polish Electricity Sector dealing with specific problems which are common for all of East Central Europe. In 1990 Poland adopted a restructuring program for the entire energy sector. Very ambitious plans were changed several times but still the main direction of change was preserved. The most difficult period of transformation is featured by several contradictions which have to be balanced. Electricity prices should increase in order to cover the modernization and development program but the society is not able to take this burden in such a short time. Furthermore the new environment protection standards force the growth of capital investment program which sooner or later has to be transferred through the electricity prices. New economic mechanisms have to be introduced to the electricity sector to replace the old ones noneffective, centrally planned. This process has to follow slow management changes. Also, introduction of new electricity market is limited by those constraints. However, this process of change would not be possible without parallel governmental initiation like preparation of new energy law and regulatory frames.

Determining Specific Window Period for Common Scab Disease Infection in Potato Tubers

Directory of Open Access Journals (Sweden)

Bhim Bahadur Khatri

2017-05-01

Full Text Available A series of experiments was conducted under glasshouse and hydroponic conditions to determine the specific window period for common scab disease infection in potato tubers. The study was performed in a glasshouse system where separate tubers from the root zone were inoculated at different intervals during plant growth along with a novel hydroponic system to inoculate individual tubers at specific times of development growth allowing non-destructive observations of common scab symptoms developing. The window of tuber susceptibility to common scab disease infection was shown to vary with the season or conditions under which the plants were grown. Different internodes on tubers were found susceptible to infection at different times during tuber development. Basal internodes, which are the first sections of the tuber to expand, were susceptible to infection in the beginning of tuber development, whereas apical internodes only became susceptible later in tuber growth when the basal internodes were no longer susceptible.

Cut Electric Bills by Controlling Demand

Science.gov (United States)

Grumman, David L.

1974-01-01

Electric bills can be reduced by lowering electric consumption and by controlling demand -- the amount of electricity used at a certain point in time. Gives tips to help reduce electric demand at peak power periods. (Author/DN)

Predicting the Response of Electricity Load to Climate Change

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Patrick [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Colman, Jesse [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kalendra, Eric [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2015-07-28

Our purpose is to develop a methodology to quantify the impact of climate change on electric loads in the United States. We perform simple linear regression, assisted by geospatial smoothing, on paired temperature and load time-series to estimate the heating- and coolinginduced sensitivity to temperature across 300 transmission zones and 16 seasonal and diurnal time periods. The estimated load sensitivities can be coupled with climate scenarios to quantify the potential impact of climate change on load, with a primary application being long-term electricity scenarios. The method allows regional and seasonal differences in climate and load response to be reflected in the electricity scenarios. While the immediate product of this analysis was designed to mesh with the spatial and temporal resolution of a specific electricity model to enable climate change scenarios and analysis with that model, we also propose that the process could be applied for other models and purposes.

Comparative study of long-period gratings written in a boron co-doped fiber by an electric arc and UV irradiation

International Nuclear Information System (INIS)

Smietana, M; Bock, W J; Mikulic, P

2010-01-01

The paper presents for the first time a comparative study of long-period gratings (LPGs) written by point-by-point UV irradiation and by electrical arc discharges. These gratings were inscribed in a highly photosensitive boron co-doped fiber that can be considered as a suitable platform for LPG writing using either technology. The experimental transmission data for the manufactured LPG devices fit well when compared to the simulations we carried out in parallel. As a result of each of these writing processes, we were able to obtain a remarkably good quality of grating. Two reasons could explain the observed small differences between the spectra: a slight mismatch of the period of the gratings and an unintentional tapering of the fiber during the arc-based processes. We also found that the UV irradiation at λ = 248 nm can cause clearly visible damage to the fiber's surface. As a result of the UV writing, a coupling to the asymmetrical cladding modes can take place. Moreover, the gratings written using the two technologies show a very similar refractive index and temperature-sensing properties. The only differences between them can come from a physical deformation of the fiber induced by the electric arc discharges

On the electricity shortage, price and electricity theft nexus

International Nuclear Information System (INIS)

Jamil, Faisal

2013-01-01

Pakistan is facing severe electricity shortfall of its history since 2006. Several measures have been implemented in order to mitigate electricity shortage. The focus has been on raising the installed capacity of electricity generation and transmission. The present policy results in expensive thermal electricity generation mostly using expensive and environmentally hazardous furnace oil and inability of utilities to recover their cost of supply although there is unprecedented rise in electricity tariffs. This study concentrates on the electricity demand and traces the relationship between electricity shortfalls, tariff rate and electricity theft in the background of recent electricity crisis using the data for the period 1985–2010. We employed the Granger causality test through error correction model and out-of-sample causality through variance decomposition method. Empirical evidence shows that electricity theft greatly influences electricity shortfalls through lowering investment and inefficient use of electricity. The study concludes that electricity crisis cannot be handled without combating rampant electricity theft in the country. - Highlights: ► The study investigates relationship among electricity outages, price and electricity theft. ► It employed Johansen approach, ECM and variance decomposition analysis. ► Empirical evidence shows that electricity theft causes outages and rising tariff rates. ► Variance decomposition analysis results are slightly different from ECM

Northeast regional assessment study for solar electric options in the period 1980-2000

Energy Technology Data Exchange (ETDEWEB)

None

1981-04-01

Opportunities for demonstration and large scale deployment of solar electric facilities are identified and assessed. Technical, economic, and institutional factors that can contribute to an accelerated use of solar energy for electric power generation are defined. The following topics are covered: a description of the Northeast Region and its solar resources, central station applications, a dispersed user analysis, user viewpoints and institutional factors, and market potential for dispersed solar electric systems. (MHR)

The Relationship between Residential Electricity Consumption and Income: A Piecewise Linear Model with Panel Data

Directory of Open Access Journals (Sweden)

Yanan Liu

2016-10-01

Full Text Available There are many uncertainties and risks in residential electricity consumption associated with economic development. Knowledge of the relationship between residential electricity consumption and its key determinant—income—is important to the sustainable development of the electric power industry. Using panel data from 30 provinces for the 1995–2012 period, this study investigates how residential electricity consumption changes as incomes increase in China. Previous studies typically used linear or quadratic double-logarithmic models imposing ex ante restrictions on the indistinct relationship between residential electricity consumption and income. Contrary to those models, we employed a reduced piecewise linear model that is self-adaptive and highly flexible and circumvents the problem of “prior restrictions”. Robust tests of different segment specifications and regression methods are performed to ensure the validity of the research. The results provide strong evidence that the income elasticity was approximately one, and it remained stable throughout the estimation period. The income threshold at which residential electricity consumption automatically remains stable or slows has not been reached. To ensure the sustainable development of the electric power industry, introducing higher energy efficiency standards for electrical appliances and improving income levels are vital. Government should also emphasize electricity conservation in the industrial sector rather than in residential sector.

The relationship between electricity consumption, electricity prices and GDP in Pakistan

International Nuclear Information System (INIS)

Jamil, Faisal; Ahmad, Eatzaz

2010-01-01

This study analyzes the relationship among electricity consumption, its price and real GDP at the aggregate and sectoral level in Pakistan. Using annual data for the period 1960-2008, the study finds the presence of unidirectional causality from real economic activity to electricity consumption. In particular, growth in output in commercial, manufacturing and agricultural sectors tend to increase electricity consumption, while in residential sector, growth in private expenditures is the cause of rising electricity consumption. The study concludes that electricity production and management needs to be better integrated with overall economic planning exercises. This is essential to avoid electricity shortfalls and unplanned load shedding.

Electricity economics. Production functions with electricity

Energy Technology Data Exchange (ETDEWEB)

Hu, Zhaoguang [State Grid Energy Research Institute, Beijing (China); Hu, Zheng [Delaware Univ., Newark, DE (United States)

2013-07-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Electricity economics. Production functions with electricity

International Nuclear Information System (INIS)

Hu, Zhaoguang; Hu, Zheng

2013-01-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Electricity spot price dynamics: Beyond financial models

International Nuclear Information System (INIS)

Guthrie, Graeme; Videbeck, Steen

2007-01-01

We reveal properties of electricity spot prices that cannot be captured by the statistical models, commonly used to model financial asset prices, that are increasingly used to model electricity prices. Using more than eight years of half-hourly spot price data from the New Zealand Electricity Market, we find that the half-hourly trading periods fall naturally into five groups corresponding to the overnight off-peak, the morning peak, daytime off-peak, evening peak, and evening off-peak. The prices in different trading periods within each group are highly correlated with each other, yet the correlations between prices in different groups are lower. Models, adopted from the modeling of security prices, that are currently applied to electricity spot prices are incapable of capturing this behavior. We use a periodic autoregression to model prices instead, showing that shocks in the peak periods are larger and less persistent than those in off-peak periods, and that they often reappear in the following peak period. In contrast, shocks in the off-peak periods are smaller, more persistent, and die out (perhaps temporarily) during the peak periods. Current approaches to modeling spot prices cannot capture this behavior either. (author)

Electrical-Generation Scenarios for China

Energy Technology Data Exchange (ETDEWEB)

Kypreos, S.; Krakowski, R.A.

2002-03-01

The China Energy Technology Program (CETP) used both optimizing and simulation energy- economic-environmental (E3) models to assess tradeoffs in the electricity-generation sector for a range of fuel, transport, generation, and distribution options. The CETP is composed of a range of technical tasks or activities, including Energy Economics Modeling (EEM, optimizations), Electric Sector Simulation (ESS, simulations), Life Cycle Analyses (LCA, externalization) of energy systems, and Multi-Criteria Decision Analyses (MCDA, integration). The scope of CETP is limited to one province (Shandong), to one economic sector (electricity), and to one energy sector (electricity). This document describes the methods, approaches, limitations, sample results, and future/needed work for the EEM ( optimization-based modeling) task that supports the overall goal of CETP. An important tool used by the EEM task is based on a Linear Programming (LP) optimization model that considers 17 electricity-generation technologies utilizing 14 fuel forms (type, composition, source) in a 7-region transportation model of China's electricity demand and supply system over the period 2000-2030; Shandong is one of the seven regions modeled. The China Regional Electricity Trade Model (CRETM) is used to examine a set of energy-environment-economy E3-driven scenarios to quantify related policy implications. The development of electricity production mixes that are optimized under realistically E3 constraints is determined through regional demands for electricity that respond to exogenous assumptions on income (GDP) and electricity prices through respective time-dependent elasticities. Constraints are applied to fuel prices, transportation limits, resource availability, introduction (penetration) rates of specific technology, and (where applicable) to local, regional, and countrywide emission rates of CO{sub 2}, SO{sub 2} and NO{sub x}. Importantly, future inter- regional energy flows are optimized with

Electric cars as mobile power storage systems

International Nuclear Information System (INIS)

Herzog, B.

2010-01-01

This article discusses the use of electric cars as a means of optimising the use of renewable energy sources. Charging the cars' batteries during periods when cheap electricity prices prevail and then using excess capacity to supply the mains with electricity during periods of peak demand is discussed. The possible use of wind for power generation is discussed and a system proposed by a leading supplier of electrical apparatus and systems is examined. Two examples of electric cars and associated power chains are looked at and tests in everyday practice are described

Power losses in electrical networks depending on weather conditions

International Nuclear Information System (INIS)

Zhelezko, Yu. S.; Kostyushko, V. A.; Krylov, S. V.; Nikiforov, E. P.; Savchenko, O. V.; Timashova, L. V.; Solomonik, E. A.

2005-01-01

Specific power losses to corona and to leakage currents over overhead insulators are presented for 110 - 750-kV transmission lines with different phase design and pole types for different weather conditions. Consumption of electric energy for ice melting on conductors of various cross sections is evaluated. Meteorological data of 1372 weather stations in Russia are processed for a period of 10 years. The territory of the country is divided into 7 regions with approximately homogeneous weather conditions. Specific power losses to corona and leakage currents over overhead insulators are presented for every region

Managing electrical demand through difficult periods: California's experience with demand response

International Nuclear Information System (INIS)

Wikler, G.; Ghosh, D.Ph.D.

2010-01-01

This paper provides a brief overview of California's electricity situation and the relevance of Demand Response (DR) in addressing some of the challenges faced by the State's electricity system. It then discusses California's experience with DR, market rules that influence what role DR plays and attempts to integrate wholesale-retail level program offerings in the State, and some of the key drivers that are likely to enhance the role of DR. Lastly, the paper identifies some of the key challenges facing implementers of DR programs and discusses how many of those challenges could potentially be overcome. (authors)

Survey on Different Samsung with Nokia Smart Mobile Phones in the Specific Absorption Rate Electrical Field of Head.

Science.gov (United States)

Fakhri, Yadolah; Alinejad, Azim; Keramati, Hassan; Bay, Abotaleb; Avazpour, Moayed; Zandsalimi, Yahya; Moradi, Bigard; Rasouli Amirhajeloo, Leila; Mirzaei, Maryam

2016-09-01

The use of smart phones is increasing in the world. This excessive use, especially in the last two decades, has created too much concern on the effects of emitted electromagnetic fields and specific absorption rate on human health. In this descriptive-analytical study of the electric field resulting from smart phones of Samsung and Nokia by portable measuring device, electromagnetic field, Model HI-3603-VDT/VLF, were measured. Then, head absorption rate was calculated in these two mobiles by ICNIRP equation. Finally, the comparison of specific absorption rate, especially between Samsung and Nokia smart phones, was conducted by T-Test statistics analysis. The mean of electric field for Samsung and Nokia smart mobile phones was obtained 1.8 ±0.19 v/m  and 2.23±0.39 v/m , respectively, while the range of the electric field was obtained as 1.56-2.21 v/m and 1.69-2.89 v/m for them, respectively. The mean of specific absorption rate in Samsung and Nokia was obtained 0.002 ± 0.0005 W/Kg and 0.0041±0.0013 W/Kg at the frequency of 900 MHz and 0.004±0.001 W/Kg and 0.0062±0.0002 W/Kg at the frequency of 1800 MHz respectively. The ratio of mean electronic field to guidance in the Samsung mobile phone at the frequency of 900 MHz and 1800 MHz was 4.36% and 3.34%, while was 5.62% and 4.31% in the Nokia mobile phone, respectively. The ratio of mean head specific absorption rate in smart mobile phones of Samsung and Nokia in the guidance level at the frequency of 900 was 0.15% and 0.25%, respectively, while was 0.23 %and 0.38% at the frequency of 1800 MHz, respectively. The rate of specific absorption of Nokia smart  mobile phones at the frequencies of 900 and 1800 MHz  was significantly higher than Samsung (p value Samsung smart mobile phone.

Market surveillance panel monitoring report on the IMO-administered electricity markets for the period from September 2002 - January 2003

International Nuclear Information System (INIS)

2003-01-01

In comparison to previous years, the demand for electricity in Ontario continued to increase. Depleted hydroelectric resources, coupled with planned generator outages reduced the supply in the fall of 2002. An unseasonably hot September and higher than expected demand occurred simultaneously with the planned outages, resulting in relatively high on-peak prices in comparison to neighbouring markets. The prices compared favorably with the prices in the neighbouring American markets for the remainder of the period. Plans to fix the commodity price of electricity for a wide segment of consumers were announced by the Ontario government. This document was divided into four chapters. In the first chapter, market outcomes September 1, 2002 to January 31, 2003 were examined. An assessment of market behaviour was presented in chapter 2, while in chapter 3, a status report on the market performance concerns raised in the October Market Surveillance Panel (MSP) report was provided. The conclusions were discussed in chapter 4. 27 tabs., 23 figs

Specific Intensity Direct Current (DC) Electric Field Improves Neural Stem Cell Migration and Enhances Differentiation towards βIII-Tubulin+ Neurons

Science.gov (United States)

Zhao, Huiping; Steiger, Amanda; Nohner, Mitch; Ye, Hui

2015-01-01

Control of stem cell migration and differentiation is vital for efficient stem cell therapy. Literature reporting electric field–guided migration and differentiation is emerging. However, it is unknown if a field that causes cell migration is also capable of guiding cell differentiation—and the mechanisms for these processes remain unclear. Here, we report that a 115 V/m direct current (DC) electric field can induce directional migration of neural precursor cells (NPCs). Whole cell patching revealed that the cell membrane depolarized in the electric field, and buffering of extracellular calcium via EGTA prevented cell migration under these conditions. Immunocytochemical staining indicated that the same electric intensity could also be used to enhance differentiation and increase the percentage of cell differentiation into neurons, but not astrocytes and oligodendrocytes. The results indicate that DC electric field of this specific intensity is capable of promoting cell directional migration and orchestrating functional differentiation, suggestively mediated by calcium influx during DC field exposure. PMID:26068466

Sex-specific mouse liver gene expression: genome-wide analysis of developmental changes from pre-pubertal period to young adulthood

Directory of Open Access Journals (Sweden)

Conforto Tara L

2012-04-01

Full Text Available Abstract Background Early liver development and the transcriptional transitions during hepatogenesis are well characterized. However, gene expression changes during the late postnatal/pre-pubertal to young adulthood period are less well understood, especially with regards to sex-specific gene expression. Methods Microarray analysis of male and female mouse liver was carried out at 3, 4, and 8 wk of age to elucidate developmental changes in gene expression from the late postnatal/pre-pubertal period to young adulthood. Results A large number of sex-biased and sex-independent genes showed significant changes during this developmental period. Notably, sex-independent genes involved in cell cycle, chromosome condensation, and DNA replication were down regulated from 3 wk to 8 wk, while genes associated with metal ion binding, ion transport and kinase activity were up regulated. A majority of genes showing sex differential expression in adult liver did not display sex differences prior to puberty, at which time extensive changes in sex-specific gene expression were seen, primarily in males. Thus, in male liver, 76% of male-specific genes were up regulated and 47% of female-specific genes were down regulated from 3 to 8 wk of age, whereas in female liver 67% of sex-specific genes showed no significant change in expression. In both sexes, genes up regulated from 3 to 8 wk were significantly enriched (p p Ihh; female-specific Cdx4, Cux2, Tox, and Trim24 and may contribute to the developmental changes that lead to global acquisition of liver sex-specificity by 8 wk of age. Conclusions Overall, the observed changes in gene expression during postnatal liver development reflect the deceleration of liver growth and the induction of specialized liver functions, with widespread changes in sex-specific gene expression primarily occurring in male liver.

Age-specific mortality trends in France and Italy since 1900: period and cohort effects.

Science.gov (United States)

Caselli, G; Vallin, J; Vaupel, J W; Yashin, A

1987-11-01

The age/sex-specific mortality trends of France and Italy were studied over the 1899-1979 period in as much detail as possible in an effort to distinguish between cohort effects and those related to period changes. Complete series of mortality data by individual years of age and calendar years were available from 1869 to 1979 for Italy and from 1899 to 1982 for France. For both countries, these data include the military and civil deaths not registered in vital statistics during the war periods. They cover each national territory as defined by its present boundaries. The graphical representation method of mortality surfaces, elaborated by Vaupel, Gambill, and Yashin (1985), was adopted. The age/sex-specific mortality patterns of France and Italy have not followed the same trends, and the differences observed today are not those of 100 years ago. The mean death probabilities for the 1975-79 period were used to illustrate the age-specific patterns of mortality. Although infant mortality was higher in Italy than in France, the death probabilities at ages 1-15 for both sexes were roughly the same for both countries. At ages 15-23, they were much higher in France than in Italy, and they remained considerably higher in France up to age 55. From then on, the sexes differ: for males, the 2 countries showed similar patterns, whereas for females the probabilities were noticeably higher for France. The situation was very different for both countries at the beginning of the century. For both sexes, higher mortality was observed in Italy not only during infancy but throughout childhood and the adolescent years up to age 15. The 2 countries showed similar patterns from 15-25. Above age 25, the 2 countries had similar patterns for females, whereas male mortality was higher in France right up to the old age groups. Such differences in the age-specific mortality trends depend in part on a different development of health and social conditions but also may be due to factors concerning

Reducing Electricity Demand Peaks by Scheduling Home Appliances Usage

DEFF Research Database (Denmark)

Rossello Busquet, Ana; Kardaras, Georgios; Iversen, Villy Bæk

2011-01-01

Nowadays there is a tendency to consume electricity during the same period of the day leading to demand peaks. Regular energy consumption habits lead to demand peaks at specific temporal intervals, because users consume power at the same time. In order to avoid demand peaks, users’ appliances...... should consume electricity in a more temporarily distributed way. A new methodology to schedule the usage of home appliances is proposed and analyzed in this paper. The main concept behind this approach is the aggregation of home appliances into priority classes and the definition of a maximum power...... consumption limit, which is not allowed to be exceeded during peak hours. The scenario simulated describes a modern household, where the electrical devices are classified in low and high priority groups. The high priority devices are always granted power in order to operate without temporal restrictions...

Secured electrical supply at least cost: Coal, gas, nuclear, hydro

Energy Technology Data Exchange (ETDEWEB)

Gavor, J. [ENA Ltd., Prague (Czechoslovakia); Stary, O.; Vasicek, J. [Czech Technical Univ., Prague (Czechoslovakia)

1995-12-01

Electric power sector in East Central European countries finds in a difficult period. In the situation of demand stagnation, enormous investments must be realized in a very short time. Today`s decisions in the development strategy will influence the long term future of the industry. The optimal structure of the sources is one of the most important problem to be solved. Paper describes the current structure of the sources in electric power sector in the Czech Republic. The importance of coal, oil and gas, nuclear and hydro in electric power generation is compared. Taking into account the different position in the load coverage, economy of individual sources is evaluated and basic results of discounted cash flow calculations are presented. Information on specific investment programs and projects are included and further trends are estimated.

What happened to efficiency in electricity industries after reforms?

International Nuclear Information System (INIS)

Erdogdu, Erkan

2011-01-01

The last two decades have witnessed widespread power market reforms in both developed and developing countries that have cost billions of dollars. Among the key aims (and assumptions) of these reforms, there has always been realization of improvements in power sector efficiency. This paper questions the validity of this hypothesis. Using panel data from 92 countries covering the period 1982-2008, empirical models are developed and analyzed. The research findings suggest that the impact of the reforms on electricity industry performance is statistically significant but also limited. The results imply that, after controlling for country-specific variables, application of liberal market models in electricity industries slightly increases efficiency in power sector. Besides, we detect a positive relationship between reform process and the percentage share of network (transmission and distribution) losses in total electricity supplied, meaning that as countries take more reform steps the network losses as a fraction of power generated tend to increase. Moreover, the study puts forward that income level and other country specific features are more important determinants of industry efficiency than the reform process. Overall, contrary to expectations of substantial increases in sector efficiency, the paper concludes that introducing a decentralized market model with competition in the electricity sector has a limited increasing effect on power industry performance. - Highlights: → The paper questions whether the reforms increase efficiency in the power sector. → Panel data from 92 countries covering the period 1982-2008 are employed. → Models are developed by fixed/random effect panel data estimation methods. → The paper concludes the reforms have a limited effect on the industry performance. → We also find that as countries take more reform steps the network losses increase.

Political determinants of electricity provision in small island developing states

International Nuclear Information System (INIS)

Boräng, Frida; Jagers, Sverker C.; Povitkina, Marina

2016-01-01

This paper approaches provision of affordable and reliable electricity in Small Island Developing States (SIDS) as a case of public good provision. It aims to contribute to our understanding of how regime type and the quality of implementing institutions within political systems affect the prerequisites for successful electrification in SIDS. More specifically, we analyse the independent and interdependent effects of level of democracy and control of corruption on per capita household electricity consumption in SIDS, using data from 34 SIDS over the period 1996–2009. The results show that although the independent effects of level of democracy and control of corruption are sensitive to model specification, these two factors do have an interdependent impact on per capita household electricity consumption: democratization has positive effects on provision of electricity to the general population only when there is a certain level of corruption control in place. The results imply a) that it is important for policy actors to acknowledge the interaction between regime type and the quality of implementing institutions, and b) when planning electrification projects in SIDS, it is necessary to have information about the social and political context in order to design the most effective projects. - Highlights: • Effects of political institutions on household electricity consumption in SIDS. • Electrification is seen as an example of public good provision. • Democracy has a positive impact on electricity consumption when corruption is low. • Electrification projects can gain from being sensitive to institutional context.

Design of application specific long period waveguide grating filters using adaptive particle swarm optimization algorithms

International Nuclear Information System (INIS)

Semwal, Girish; Rastogi, Vipul

2014-01-01

We present design optimization of wavelength filters based on long period waveguide gratings (LPWGs) using the adaptive particle swarm optimization (APSO) technique. We demonstrate optimization of the LPWG parameters for single-band, wide-band and dual-band rejection filters for testing the convergence of APSO algorithms. After convergence tests on the algorithms, the optimization technique has been implemented to design more complicated application specific filters such as erbium doped fiber amplifier (EDFA) amplified spontaneous emission (ASE) flattening, erbium doped waveguide amplifier (EDWA) gain flattening and pre-defined broadband rejection filters. The technique is useful for designing and optimizing the parameters of LPWGs to achieve complicated application specific spectra. (paper)

Electric field mapping and auroral Birkeland currents

International Nuclear Information System (INIS)

Kaufmann, R.L.; Larson, D.J.

1989-01-01

Magnetic field lines, electric fields and equipotentials have been mapped throughout the magnetosphere in the vicinity of strong Birkeland currents. It was found that a uniform electric field at either the ionospheric or the equatorial end of a field line can map to a highly structured field at the other end if strong Birkeland currents are located nearby. The initiation of sheet currents of the region 1 - region 2 scale size and intensity resulted in magnetic field line displacements of about 1/2 hour in local time between equatorial and ionospheric end points. As a result, a uniform dawn to dusk electric field at the equator mapped to an ionospheric electric field with strong inward pointing components in the dusk hemisphere. Similar distortions were produced by Birkeland currents associated with narrow east-west-aligned auroral arcs. A specific model for the auroral current system, based on ionospheric measurements during a large substorm, was used to study effects seen during disturbed periods. An iterative procedure was developed to generate a self-consistent current system even in the presence of highly twisted field lines. The measured ionospheric electric field was projected tot he equatorial plane in the presence of the model Birkeland current system. Several physical processes were seen to influence ionospheric and equatorial electric fields, and the associated plasma convection, during a substorm

Medium-Duty Plug-in Electric Delivery Truck Fleet Evaluation

Energy Technology Data Exchange (ETDEWEB)

Prohaska, Robert; Ragatz, Adam; Simpson, Mike; Kelly, Kenneth

2016-06-29

In this paper, the authors present an overview of medium-duty electric vehicle (EV) operating behavior based on in-use data collected from Smith Newton electric delivery vehicles and compare their performance and operation to conventional diesel trucks operating in the same fleet. The vehicles' drive cycles and operation are analyzed and compared to demonstrate the importance of matching specific EV technologies to the appropriate operational duty cycle. The results of this analysis show that the Smith Newton EVs demonstrated a 68% reduction in energy consumption over the data reporting period compared to the conventional diesel vehicles, as well as a 46.4% reduction in carbon dioxide equivalent emissions based on the local energy generation source.

Technical specifications, Vogtle Electric Generating Plant, Unit No. 1 (Docket No. 50-424): Appendix ''A'' to license No. NPF-61

International Nuclear Information System (INIS)

1987-01-01

This technical specifications report presents information concerning the Vogtle Electric Generating Plant in the following areas: safety limits and limiting safety system settings; limiting conditions for operation and surveillance requirements; design features; and administrative controls

Analysis of electricity price in Danish competitive electricity market

DEFF Research Database (Denmark)

Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

2012-01-01

electricity markets in some ways, is chosen as the studied power system. 10 year actual data from the Danish competitive electricity market are collected and analyzed. The relationship among the electricity price (both the spot price and the regulation price), the consumption and the wind power generation...... in an electricity market is investigated in this paper. The spot price and the regulation price generally decrease when the wind power penetration in the power system increases or the consumption of the power system decreases. The statistical characteristics of the spot price and the regulation price for different...... consumption periods and wind power penetration are analyzed. Simulation results show that the findings of this paper are useful for wind power generation companies to make the optimal bidding strategy so that the imbalance cost of trading wind power on the electricity market could be reduced....

Geothermal electricity generation

International Nuclear Information System (INIS)

Eliasson, E.T.

1991-01-01

Geothermal conversion, as discussed here, is the conversion of the heat bound within the topmost three kilometres of the upper crust of the earth into useful energy, principally electricity. The characteristics of a geothermal reservoir and its individual technical features are highly site-specific. Applications therefore must be designed to match the specific geothermal reservoir. An estimate of the electric energy potential world-wide made by the Electric Power Research Institute (United States) in 1978 and based on sustaining a continuous 30-year operation is given in the box at the right for comparison purposes only. 8 refs, 5 figs

Synaptic Effects of Electric Fields

Science.gov (United States)

Rahman, Asif

Learning and sensory processing in the brain relies on the effective transmission of information across synapses. The strength and efficacy of synaptic transmission is modifiable through training and can be modulated with noninvasive electrical brain stimulation. Transcranial electrical stimulation (TES), specifically, induces weak intensity and spatially diffuse electric fields in the brain. Despite being weak, electric fields modulate spiking probability and the efficacy of synaptic transmission. These effects critically depend on the direction of the electric field relative to the orientation of the neuron and on the level of endogenous synaptic activity. TES has been used to modulate a wide range of neuropsychiatric indications, for various rehabilitation applications, and cognitive performance in diverse tasks. How can a weak and diffuse electric field, which simultaneously polarizes neurons across the brain, have precise changes in brain function? Designing therapies to maximize desired outcomes and minimize undesired effects presents a challenging problem. A series of experiments and computational models are used to define the anatomical and functional factors leading to specificity of TES. Anatomical specificity derives from guiding current to targeted brain structures and taking advantage of the direction-sensitivity of neurons with respect to the electric field. Functional specificity originates from preferential modulation of neuronal networks that are already active. Diffuse electric fields may recruit connected brain networks involved in a training task and promote plasticity along active synaptic pathways. In vitro, electric fields boost endogenous synaptic plasticity and raise the ceiling for synaptic learning with repeated stimulation sessions. Synapses undergoing strong plasticity are preferentially modulated over weak synapses. Therefore, active circuits that are involved in a task could be more susceptible to stimulation than inactive circuits

Solar energy thermally powered electrical generating system

Science.gov (United States)

Owens, William R. (Inventor)

1989-01-01

A thermally powered electrical generating system for use in a space vehicle is disclosed. The rate of storage in a thermal energy storage medium is controlled by varying the rate of generation and dissipation of electrical energy in a thermally powered electrical generating system which is powered from heat stored in the thermal energy storage medium without exceeding a maximum quantity of heat. A control system (10) varies the rate at which electrical energy is generated by the electrical generating system and the rate at which electrical energy is consumed by a variable parasitic electrical load to cause storage of an amount of thermal energy in the thermal energy storage system at the end of a period of insolation which is sufficient to satisfy the scheduled demand for electrical power to be generated during the next period of eclipse. The control system is based upon Kalman filter theory.

Electricity Storage. Technology Brief

Energy Technology Data Exchange (ETDEWEB)

Simbolotti, G. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development ENEA, Rome (Italy); Kempener, R. [International Renewable Energy Agency IRENA, Bonn (Germany)

2012-04-15

Electricity storage is a key technology for electricity systems with a high share of renewables as it allows electricity to be generated when renewable sources (i.e. wind, sunlight) are available and to be consumed on demand. It is expected that the increasing price of fossil fuels and peak-load electricity and the growing share of renewables will result in electricity storage to grow rapidly and become more cost effective. However, electricity storage is technically challenging because electricity can only be stored after conversion into other forms of energy, and this involves expensive equipment and energy losses. At present, the only commercial storage option is pumped hydro power where surplus electricity (e.g. electricity produced overnight by base-load coal or nuclear power) is used to pump water from a lower to an upper reservoir. The stored energy is then used to produce hydropower during daily high-demand periods. Pumped hydro plants are large-scale storage systems with a typical efficiency between 70% and 80%, which means that a quarter of the energy is lost in the process. Other storage technologies with different characteristics (i.e. storage process and capacity, conversion back to electricity and response to power demand, energy losses and costs) are currently in demonstration or pre-commercial stages and discussed in this brief report: Compressed air energy storage (CAES) systems, Flywheels; Electrical batteries; Supercapacitors; Superconducting magnetic storage; and Thermal energy storage. No single electricity storage technology scores high in all dimensions. The technology of choice often depends on the size of the system, the specific service, the electricity sources and the marginal cost of peak electricity. Pumped hydro currently accounts for 95% of the global storage capacity and still offers a considerable expansion potential but does not suit residential or small-size applications. CAES expansion is limited due to the lack of suitable

Forsmark site investigation. Monitoring of brook water levels, electrical conductivities, temperatures and discharges January-December 2010

Energy Technology Data Exchange (ETDEWEB)

Johansson, Per-Olof (Artesia Grundvattenkonsult (Sweden)); Juston, John (Juston Konsult (Sweden))

2011-06-15

to large deviations between the automatic registrations and the manual measurements of electrical conductivity at the outlet of Lake Bolundsfjaerden, no data from the automatic registration were accepted at the quality control, and no data were reported to Sicada from this station. The water temperatures varied between c. zero during winter up to c. 20 deg C during hot summer days with low discharge. The highest recorded discharge of the largest catchment (gauging station PFM005764) during 2010 was 321 L/s and for the smallest catchment 101 L/s (gauging station PFM002668). All stations had periods of zero discharge during July-August. The specific discharge for the largest catchment was 6.53 L/s/km2 (206 mm/yr) which is considerably higher than the estimated longterm average of 150-160 mm/yr. The specific discharge for the largest catchment, averaged over the six-year period 2005-2010 was 5.93 L/s/km2 (187 mm/yr). The station with the lowest specific discharge during 2010 was PFM002667; 5.66 L/s/km2 (178 mm/yr)

The financial and accounting implications of the privatization of the regional electricity companies in the UK

International Nuclear Information System (INIS)

Thomson, L.

1993-01-01

This paper reviews some of the financial and accounting implications of the privatization of the electricity distribution and supply sector in England and Wales, specifically the transformation of the Electricity Area Boards into the 12 Regional Electricity Companies (RECs). It considers the factors influencing the setting of post-privatization price control factors; the capital restructuring of the RECs; the valuation placed by the Secretary of State for Energy on each company at flotation, and market reaction to this as shown in subsequent changes in share price; and changes in the information provided in the RECs' accounts over the privatization period. (Author)

VDE-specification for electrical equipment and apparatus in atmospheres endangered by explosive material. Draft. VDE-Bestimmung fuer elektrische Anlagen und deren Betriebsmittel in explosivgefaehrdeten Bereichen. Entwurf

Energy Technology Data Exchange (ETDEWEB)

1976-02-01

These specifications are valid for the setting-up, changing, putting into operation and developing of electrical equipment, as well as for the application of electrical apparatus in such systems and in regions endangered by explosive materials.

Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling

International Nuclear Information System (INIS)

Sunohara, Tetsu; Hirata, Akimasa; Laakso, Ilkka; Onishi, Teruo

2014-01-01

This study investigates the specific absorption rate (SAR) and the in situ electric field in anatomically based human models for the magnetic field from an inductive wireless power transfer system developed on the basis of the specifications of the wireless power consortium. The transfer system consists of two induction coils covered by magnetic sheets. Both the waiting and charging conditions are considered. The transfer frequency considered in this study is 140 kHz, which is within the range where the magneto-quasi-static approximation is valid. The SAR and in situ electric field in the chest and arm of the models are calculated by numerically solving the scalar potential finite difference equation. The electromagnetic modelling of the coils in the wireless power transfer system is verified by comparing the computed and measured magnetic field distributions. The results indicate that the peak value of the SAR averaged over a 10 g of tissue and that of the in situ electric field are 72 nW kg −1  and 91 mV m −1  for a transmitted power of 1 W, Consequently, the maximum allowable transmitted powers satisfying the exposure limits of the SAR (2 W kg −1 ) and the in situ electric field (18.9 V m −1 ) are found to be 28 MW and 43 kW. The computational results show that the in situ electric field in the chest is the most restrictive factor when compliance with the wireless power transfer system is evaluated according to international guidelines. (paper)

Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling.

Science.gov (United States)

Sunohara, Tetsu; Hirata, Akimasa; Laakso, Ilkka; Onishi, Teruo

2014-07-21

This study investigates the specific absorption rate (SAR) and the in situ electric field in anatomically based human models for the magnetic field from an inductive wireless power transfer system developed on the basis of the specifications of the wireless power consortium. The transfer system consists of two induction coils covered by magnetic sheets. Both the waiting and charging conditions are considered. The transfer frequency considered in this study is 140 kHz, which is within the range where the magneto-quasi-static approximation is valid. The SAR and in situ electric field in the chest and arm of the models are calculated by numerically solving the scalar potential finite difference equation. The electromagnetic modelling of the coils in the wireless power transfer system is verified by comparing the computed and measured magnetic field distributions. The results indicate that the peak value of the SAR averaged over a 10 g of tissue and that of the in situ electric field are 72 nW kg(-1) and 91 mV m(-1) for a transmitted power of 1 W, Consequently, the maximum allowable transmitted powers satisfying the exposure limits of the SAR (2 W kg(-1)) and the in situ electric field (18.9 V m(-1)) are found to be 28 MW and 43 kW. The computational results show that the in situ electric field in the chest is the most restrictive factor when compliance with the wireless power transfer system is evaluated according to international guidelines.

Multi-period multi-objective electricity generation expansion planning problem with Monte-Carlo simulation

Energy Technology Data Exchange (ETDEWEB)

Tekiner, Hatice [Industrial Engineering, College of Engineering and Natural Sciences, Istanbul Sehir University, 2 Ahmet Bayman Rd, Istanbul (Turkey); Coit, David W. [Department of Industrial and Systems Engineering, Rutgers University, 96 Frelinghuysen Rd., Piscataway, NJ (United States); Felder, Frank A. [Edward J. Bloustein School of Planning and Public Policy, Rutgers University, Piscataway, NJ (United States)

2010-12-15

A new approach to the electricity generation expansion problem is proposed to minimize simultaneously multiple objectives, such as cost and air emissions, including CO{sub 2} and NO{sub x}, over a long term planning horizon. In this problem, system expansion decisions are made to select the type of power generation, such as coal, nuclear, wind, etc., where the new generation asset should be located, and at which time period expansion should take place. We are able to find a Pareto front for the multi-objective generation expansion planning problem that explicitly considers availability of the system components over the planning horizon and operational dispatching decisions. Monte-Carlo simulation is used to generate numerous scenarios based on the component availabilities and anticipated demand for energy. The problem is then formulated as a mixed integer linear program, and optimal solutions are found based on the simulated scenarios with a combined objective function considering the multiple problem objectives. The different objectives are combined using dimensionless weights and a Pareto front can be determined by varying these weights. The mathematical model is demonstrated on an example problem with interesting results indicating how expansion decisions vary depending on whether minimizing cost or minimizing greenhouse gas emissions or pollutants is given higher priority. (author)

Trade in electricity certificates: a new means for stimulating electricity from renewable energy sources: final report from the electricity certificate inquiry

International Nuclear Information System (INIS)

2001-01-01

We recommend the introduction of a quota-based Swedish certificate system to promote production of electricity from renewable energy sources commencing on 1 January 2003. We recommend that the certificate system should be based on the following principles: The quota obligation should be set for the years 2003 to 2010 and for all intervening years. The quota is expressed as a share of the total amount of electricity used. It is proposed that as a guideline, a target of an increase in electricity production from renewable energy sources of 10 TWh, in a period from 2003 to 2010 inclusive, is adopted. It is estimated that approximately half of this increase can come from expansion of existing production and half from new plants. The following electricity production plants are to be entitled to certificates provided they comply with the requirement that electricity is to be produced from renewable energy sources and that they meet the environmental criteria set, including fuel requirements, where electricity is produced with the aid of: 1. wind power, 2. solar energy, 3. geothermal energy, 4. certain types of biofuel, 5. wave energy, 6. hydroelectric power at existing plants which, at the time of the Electricity Certificate law coming into effect, have a capacity not exceeding 1 500 kilowatt, 7. hydroelectric power at plants which have not been in operation after 1 July 2001 but which were commissioned after the coming into effect of the Electricity Certificate law, 8. increased installed capacity at existing hydroelectric power plants to the extent that capacity is increased by measures undertaken after 1 July 2002, and 9. hydroelectric power produced at plants, which started operation for the first time after 1 July 2002. The quota period is defined as one calendar year. Certificates may be 'banked' by those subject to quota should they have more certificates at the end of the quota period than need to be submitted. A certificate is valid for an unlimited period of

The analysis of Taiwan's residential electricity demand under the electricity tariff policy

Science.gov (United States)

Chen, Po-Jui

In October 2013, the Taiwan Power Company (Taipower), the monopolized state utility service in Taiwan, implemented an electricity tariff adjustment policy to reduce residential electricity demand. Using bi-monthly billing data from 6,932 electricity consumers, this study examine how consumers respond to an increase in electricity prices. This study employs an empirical approach that takes advantage of quasi-random variation over a period of time when household bills were affected by a change in electricity price. The study found that this price increase caused a 1.78% decline in residential electricity consumption, implying a price elasticity of -0.19 for summer-season months and -0.15 for non-summer-season months. The demand for electricity is therefore relatively inelastic, likely because it is hard for people to change their electricity consumption behavior in the short-term. The results of this study highlight that demand-side management cannot be the only lever used to address Taiwan's forecasted decrease in electricity supply.

A technique to detect periodic and non-periodic ultra-rapid flux time variations with standard radio-astronomical data

Science.gov (United States)

Borra, Ermanno F.; Romney, Jonathan D.; Trottier, Eric

2018-06-01

We demonstrate that extremely rapid and weak periodic and non-periodic signals can easily be detected by using the autocorrelation of intensity as a function of time. We use standard radio-astronomical observations that have artificial periodic and non-periodic signals generated by the electronics of terrestrial origin. The autocorrelation detects weak signals that have small amplitudes because it averages over long integration times. Another advantage is that it allows a direct visualization of the shape of the signals, while it is difficult to see the shape with a Fourier transform. Although Fourier transforms can also detect periodic signals, a novelty of this work is that we demonstrate another major advantage of the autocorrelation, that it can detect non-periodic signals while the Fourier transform cannot. Another major novelty of our work is that we use electric fields taken in a standard format with standard instrumentation at a radio observatory and therefore no specialized instrumentation is needed. Because the electric fields are sampled every 15.625 ns, they therefore allow detection of very rapid time variations. Notwithstanding the long integration times, the autocorrelation detects very rapid intensity variations as a function of time. The autocorrelation could also detect messages from Extraterrestrial Intelligence as non-periodic signals.

Development of specific materials for the high power electronic components in electric vehicles

Directory of Open Access Journals (Sweden)

Kaabi Abderrahmen

2013-11-01

Full Text Available The powerchain in electric vehicles sets new demands on semi conductors and their packaging. The latter will be specifically addressed. The power density per cm2 in DC/DC or DC/AC converters requires a mastering of thermomecahnical aspects. The temperature cyling, the environment under the hood of the vehicles and the “hybrid” technology impose severe constraints on the assemblies which may be met by architectured substrates, new options for assemblies and efficient cooling systems. An optimised semi conductor substrate associating copper and invar in a will be developed, relying on roll bonding to produce the 3D architecture. Roll bonding may also be used to associate aluminium and iron to produce light laminates with a CEM performance.

Overview of hybrid electric vehicle trend

Science.gov (United States)

Wang, Haomiao; Yang, Weidong; Chen, Yingshu; Wang, Yun

2018-04-01

With the increase of per capita energy consumption, environmental pollution is worsening. Using new alternative sources of energy, reducing the use of conventional fuel-powered engines is imperative. Due to the short period, pure electric vehicles cannot be mass-produced and there are many problems such as imperfect charging facilities. Therefore, the development of hybrid electric vehicles is particularly important in a certain period. In this paper, the classification of hybrid vehicle, research status of hybrid vehicle and future development trends of hybrid vehicles is introduced. It is conducive to the public understanding of hybrid electric vehicles, which has a certain theoretical significance.

A smooth transition logit model of the effects of deregulation in the electricity market

DEFF Research Database (Denmark)

Hurn, A. Stan; Silvennoinen, Annastiina; Teräsvirta, Timo

2016-01-01

of the model are derived along with their asymptotic properties, together with a Lagrange multiplier test of the null hypothesis of linearity in the underlying latent index. The development of the STL model is motivated by the desire to assess the impact of deregulation in the Queensland electricity market...... and ascertain whether increased competition has resulted in significant changes in the behaviour of the spot price of electricity, specifically with respect to the occurrence of periodic abnormally high prices. The model allows the timing of any change to be endogenously determined and also market participants...

Electric field prediction for a human body-electric machine system.

Science.gov (United States)

Ioannides, Maria G; Papadopoulos, Peter J; Dimitropoulou, Eugenia

2004-01-01

A system consisting of an electric machine and a human body is studied and the resulting electric field is predicted. A 3-phase induction machine operating at full load is modeled considering its geometry, windings, and materials. A human model is also constructed approximating its geometry and the electric properties of tissues. Using the finite element technique the electric field distribution in the human body is determined for a distance of 1 and 5 m from the machine and its effects are studied. Particularly, electric field potential variations are determined at specific points inside the human body and for these points the electric field intensity is computed and compared to the limit values for exposure according to international standards.

New conducted electrical weapons: Electrical safety relative to relevant standards.

Science.gov (United States)

Panescu, Dorin; Nerheim, Max; Kroll, Mark W; Brave, Michael A

2017-07-01

We have previously published about TASER ® conducted electrical weapons (CEW) compliance with international standards. CEWs deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. An eXperimental Rotating-Field (XRF) waveform CEW and the X2 CEW are new 2-shot electrical weapon models designed to target a precise amount of delivered charge per pulse. They both can deploy 1 or 2 dart pairs, delivered by 2 separate cartridges. Additionally, the XRF controls delivery of incapacitating pulses over 4 field vectors, in a rotating sequence. As in our previous study, we were motivated by the need to understand the cardiac safety profile of these new CEWs. The goal of this paper is to analyze the nominal electrical outputs of TASER XRF and X2 CEWs in reference to provisions of all relevant international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of several TASER XRF and X2 CEWs were measured under normal operating conditions. The measurements were compared against manufacturer specifications. CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2, IEC 60601-1 and BS EN 60601-1. Our study confirmed that the nominal electrical outputs of TASER XRF and X2 CEWs lie within safety bounds specified by relevant standards.

Magnetic and electric stimulation to elicit the masseteric exteroceptive suppression period

DEFF Research Database (Denmark)

Komiyama, Osamu; Wang, Kelun; Svensson, Peter

2010-01-01

: In contrast to electrical stimulation, both ES1 and ES2 appeared and saturated with painless magnetic stimuli. SIGNIFICANCE: The present results indicate that both ES1 and ES2 have a non-nociceptive origin. Painless magnetic stimuli will be an advantage in ES reflex examinations for various orofacial pain......OBJECTIVES: The present study compared the perception of electric and magnetic stimuli for reflex appearance threshold (RT) and reflex saturation threshold (RS) of the exteroceptive suppression reflex (ES) in the masseter muscle. METHODS: Twelve healthy males and 12 females (age: 24.2+/-3.2 years......) participated. The surface EMG was recorded from the left masseter muscle. The stimulus intensities were set as multiple values of the sensory threshold (ST), and were applied to the skin above the left mental nerve. Subjects reported the perceived intensity of the stimulus on a numeric rating scale (NRS) at RT...

INVESTIGATION OF HEAT CONDUCTION AND SPECIFIC ELECTRIC IMPEDANCE OF POROUS MATERIALS

Directory of Open Access Journals (Sweden)

E. S. Golubtsova

2004-01-01

Full Text Available In this article there was investigated the influence of porosity and temperature change on heat condition and electrical resistance of porous iron (PZh4M nickel and steel 14X17H2. There are received the adequate equations of regression, establishing connection between heat conduction and electrical resistance of the investigated materials with their porosity and temperature.

Forsmark site investigation. Monitoring of brook water levels, electrical conductivities, temperatures and discharges January-December 2009

Energy Technology Data Exchange (ETDEWEB)

Johansson, Per-Olof (Artesia Grundvattenkonsult (Sweden)); Juston, John (Juston Konsult (Sweden))

2011-03-15

This document reports the monitoring of water levels, electrical conductivities, temperatures and discharges at four brook discharge gauging stations, and the monitoring of water electrical conductivity at the outlet of Lake Bolundsfjaerden in the Forsmark area. The report presents data from 1 January through 31 December 2009 and is a continuation of reporting from Johansson and Juston (2007, 2009), which covered the periods from 1 April 2004 through 31 March 2007 and 1 April 2007 through 31 December 2008, respectively. Long-throated flumes equipped with automatically recording devices were used for the discharge measurements. Every c. 14 days the water depths at the upstream edge of the flumes were measured manually by a ruler as a check. Electrical conductivity and temperature were automatically recorded and these parameters were also measured manually every c. 14 days with the site investigation field devices. SKB's Hydro Monitoring System (HMS) was used to collect and store all data. From HMS quality assured data were transferred to SKB's primary database Sicada. Measurements of levels, electrical conductivities and temperatures were made every 10 minutes (every 30 minutes for electrical conductivity at the outlet of Lake Bolundsfjaerden). For the calculation of discharge, quality assured water level data from the flumes were used. The calculation procedure included consolidation of the time series to hourly averages, screening of data for removal of short-term spikes, noise and other data that were judged erroneous. After the calculations were performed, the results were delivered to Sicada. The amplitudes of water level variations during this reporting period were 0.26-0.33 m at the four stations. The mean electrical conductivities varied between 26 and 41 mS/m at the four discharge stations. The electrical conductivity at the outlet of Lake Bolundsfjaerden varied between 53 and 188 mS/m during the period with the higher values at the end of the

Effects of electric stimulation of the hunger center in the lateral hypothalamus on slow electric activity and spike activity of fundal and antral stomach muscles in rabbits under conditions of hunger and satiation.

Science.gov (United States)

Kromin, A A; Zenina, O Yu

2013-09-01

In chronic experiments on rabbits, the effect of electric stimulation of the hunger center in the lateral hypothalamus on myoelectric activity of the fundal and antral parts of the stomach was studied under conditions of hunger and satiation in the absence of food. Stimulation of the lateral hypothalamus in rabbits subjected to 24-h food deprivation and in previously fed rabbits produced incessant seeking behavior, which was followed by reorganization of the structure of temporal organization of slow wave electric activity of muscles of the stomach body and antrum specific for hungry and satiated animals. Increased hunger motivation during electric stimulation of the lateral hypothalamus manifested in the structure of temporal organization of slow wave electric activity of the stomach body and antrum muscles in rabbits subjected to 24-h food deprivation in the replacement of bimodal distribution of slow wave periods to a trimodal type typical of 2-day deprivation, while transition from satiation to hunger caused by electric stimulation of the lateral hypothalamus was associated with a shift from monomodal distributions of slow wave periods to a bimodal type typical of 24-h deprivation. Reorganization of the structure of temporal organization of slow wave electric activity of the stomach body and antrum muscles during electric stimulation of the lateral hypothalamus was determined by descending inhibitory influences of food motivational excitation on activity of the myogenic pacemaker of the lesser curvature of the stomach.

Neuron class-specific requirements for Fragile X Mental Retardation Protein in critical period development of calcium signaling in learning and memory circuitry.

Science.gov (United States)

Doll, Caleb A; Broadie, Kendal

2016-05-01

Neural circuit optimization occurs through sensory activity-dependent mechanisms that refine synaptic connectivity and information processing during early-use developmental critical periods. Fragile X Mental Retardation Protein (FMRP), the gene product lost in Fragile X syndrome (FXS), acts as an activity sensor during critical period development, both as an RNA-binding translation regulator and channel-binding excitability regulator. Here, we employ a Drosophila FXS disease model to assay calcium signaling dynamics with a targeted transgenic GCaMP reporter during critical period development of the mushroom body (MB) learning/memory circuit. We find FMRP regulates depolarization-induced calcium signaling in a neuron-specific manner within this circuit, suppressing activity-dependent calcium transients in excitatory cholinergic MB input projection neurons and enhancing calcium signals in inhibitory GABAergic MB output neurons. Both changes are restricted to the developmental critical period and rectified at maturity. Importantly, conditional genetic (dfmr1) rescue of null mutants during the critical period corrects calcium signaling defects in both neuron classes, indicating a temporally restricted FMRP requirement. Likewise, conditional dfmr1 knockdown (RNAi) during the critical period replicates constitutive null mutant defects in both neuron classes, confirming cell-autonomous requirements for FMRP in developmental regulation of calcium signaling dynamics. Optogenetic stimulation during the critical period enhances depolarization-induced calcium signaling in both neuron classes, but this developmental change is eliminated in dfmr1 null mutants, indicating the activity-dependent regulation requires FMRP. These results show FMRP shapes neuron class-specific calcium signaling in excitatory vs. inhibitory neurons in developing learning/memory circuitry, and that FMRP mediates activity-dependent regulation of calcium signaling specifically during the early

EU Emission Allowances and the stock market Evidence from the electricity industry

International Nuclear Information System (INIS)

Oberndorfer, Ulrich

2009-01-01

This paper constitutes - to our best knowledge - the first econometric analysis on stock market effects of the EU Emission Trading Scheme (EU ETS). Our results suggest that EU Emission Allowance (EUA) price developments matter to the stock performance of electricity firms: EUA price changes and stock returns of the most important European electricity corporations are shown to be positively related. This effect does not work asymmetrically, so that stock markets do not seem to react differently to EUA appreciations in comparison to depreciations. The carbon market effect is shown to be both time- and country-specific: It is particularly strong for the period of EUA market shock in early 2006, and differs with respect to the countries where the electricity corporations analysed are headquartered. Stock market reactions to EUA volatility could not be shown. (author)

Solar/electric heating systems for the future energy system

DEFF Research Database (Denmark)

Furbo, Simon; Dannemand, Mark; Perers, Bengt

elements/heat pump, advanced heat storage tanks and advanced control systems. Heat is produced by solar collectors in sunny periods and by electrical heating elements/heat pump. The electrical heating elements/heat pump will be in operation in periods where the heat demand cannot be covered by solar energy....... The aim is to use the auxiliary heating units when the electricity price is low, e.g. due to large electricity production by wind turbines. The unit is equipped with an advanced control system where the control of the auxiliary heating is based on forecasts of the electricity price, the heat demand...

Natural-gas-powered thermoelectricity as a reliability factor in the Brazilian electric sector

International Nuclear Information System (INIS)

Fernandes, E.; Oliveira, J.C.S. de; de Oliveira, P.R.; Alonso, P.S.R.

2008-01-01

The introduction of natural-gas-powered thermoelectricity into the Brazilian generation sector can be considered as a very complex energy, economic, regulatory and institutional revision. Brazil is a country with very specific characteristics in electricity generation, as approximately 80% of the generating capacity is based on hydroelectricity, showing strong dependency on rain and management of water reservoirs. A low rate of investment in the Brazilian Electricity Industry in the period of 1995-2000, associated with periods of low rainfall, led to a dramatic lowering of the water stocks in the reservoirs. With this scenario and the growing supply of natural gas, both from within Brazil and imported, natural gas thermal electric plants became a good option to diversify the electrical supply system. In spite of the Brazilian Government's efforts to install such plants, the country was faced with severe electricity rationing in 2001. The objective of this work is to show the need to continue with the implementation of natural gas thermal electricity projects, in a manner that allows flexibility and guarantees greater working reliability for the entire Brazilian electricity sector. Taking into account the world trend towards renewable energy, the perspectives of usage of biofuels in the Brazilian Energy Matrix and in electrical energy generation are also analyzed. The very issue of electrical power efficiency in Brazil and its challenges and strategic proposals from the standpoint of Government Programs and results provided so far are presented. The technological constraints in order to put on stream the thermal electric plants are also analyzed. The article concludes with a positive perspective of the usage of natural gas as to be the third pillar in the Brazilian Energy Matrix for the years to come

Design and fabrication of a 3D-structured gold film with nanopores for local electric field enhancement in the pore

International Nuclear Information System (INIS)

Grant-Jacob, James A; Zin Oo, Swe; Carpignano, Francesca; Brocklesby, William S; Melvin, Tracy; Boden, Stuart A; Charlton, Martin D B

2016-01-01

Three-dimensionally structured gold membrane films with nanopores of defined, periodic geometries are designed and fabricated to provide the spatially localised enhancement of electric fields by manipulation of the plasmons inside nanopores. Square nanopores of different size and orientation relative to the pyramid are considered for films in aqueous and air environments, which allow for control of the position of electric fields within the structure. Designs suitable for use with 780 nm light were created. Here, periodic pyramidal cavities produced by potassium hydroxide etching to the {111} planes of (100) silicon substrates are used as templates for creating a periodic, pyramidal structured, free-standing thin gold film. Consistent with the findings from the theoretical studies, a nano-sized hole of 50 nm square was milled through the gold film at a specific location in the cavity to provide electric field control which can subsequently used for enhancement of fluorescence or Raman scattering of molecules in the nanopore. (paper)

Design and fabrication of a 3D-structured gold film with nanopores for local electric field enhancement in the pore

Science.gov (United States)

Grant-Jacob, James A.; Zin Oo, Swe; Carpignano, Francesca; Boden, Stuart A.; Brocklesby, William S.; Charlton, Martin D. B.; Melvin, Tracy

2016-02-01

Three-dimensionally structured gold membrane films with nanopores of defined, periodic geometries are designed and fabricated to provide the spatially localised enhancement of electric fields by manipulation of the plasmons inside nanopores. Square nanopores of different size and orientation relative to the pyramid are considered for films in aqueous and air environments, which allow for control of the position of electric fields within the structure. Designs suitable for use with 780 nm light were created. Here, periodic pyramidal cavities produced by potassium hydroxide etching to the {111} planes of (100) silicon substrates are used as templates for creating a periodic, pyramidal structured, free-standing thin gold film. Consistent with the findings from the theoretical studies, a nano-sized hole of 50 nm square was milled through the gold film at a specific location in the cavity to provide electric field control which can subsequently used for enhancement of fluorescence or Raman scattering of molecules in the nanopore.

Sustainable Federal Fleets: Deploying Electric Vehicles and Electric Vehicle Supply Equipment

Energy Technology Data Exchange (ETDEWEB)

2017-01-01

The U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) helps federal agencies reduce petroleum consumption and increase alternative fuel use through its resources for Sustainable Federal Fleets. To assist agencies with the transition to plug-in electric vehicles (PEVs), including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), FEMP offers technical guidance on electric vehicle supply equipment (EVSE) installations and site-specific planning through partnerships with the National Renewable Energy Laboratory's (NREL's) EVSE Tiger Teams.

Estimation of Iranian price elasticities of residential electricity demand

Directory of Open Access Journals (Sweden)

Yeganeh Mousavi Jahromi

2014-06-01

Full Text Available This paper presents a study to determine demand for electricity in city of Yazd, Iran over the period of 1998-2008. Using vector error correction model (VECM based on seasonal information, the study determines that electricity has no elasticity in short term in household expenditure. Therefore, government policy on increasing price of electricity will not influence demand. However, electricity maintains elasticity over the long-term period and an increase on price of electricity could motivate consumers to reduce their consumption by purchasing energy efficient facilities. Therefore, any governmental strategy to increase price may have positive impact on economy. The study also detects a positive and meaningful relationship between temperature and electricity consumption.

Electrical spects of rainout. A preliminary survey, for period January 15, 1976--January 14, 1976

International Nuclear Information System (INIS)

1976-01-01

Electrical parameters that influence the attachment of radioactive aerosol particles to cloud droplets are examined. These include the expected ambient ionization, the distribution and lifetimes of particle charge, the distribution of charge on the collecting droplets, and the magnitude of electric fields that might be present. The order of magnitude estimates obtained are used to amplify the upper bounds obtained earlier by Williams for the high electric field limit. Areas needing further study are indicated

The linear and nonlinear response of infinite periodic systems to static and/or dynamic electric fields. Implementation in CRYSTAL code

Energy Technology Data Exchange (ETDEWEB)

Kirtman, Bernard [Department of Chemistry and Biochemistry, University of California, Santa Barbara, California 93106 (United States); Springborg, Michael [Physical and Theoretical Chemistry, University of Saarland, 66123 Saarbrücken (Germany); Rérat, Michel [Equipe de Chimie Physique, IPREM UMR5254, Université de Pau et des Pays de l' Adour, 64000 Pau (France); Ferrero, Mauro; Lacivita, Valentina; Dovesi, Roberto [Departimeno di Chimica, IFM, Università di Torino and NIS - Nanostructure Interfaces and Surfaces - Centre of Excellence, Via P. Giuria 7, 10125 Torino (Italy); Orlando, Roberto [Departimento di Scienze e Tecnologie Avanzati, Università del Piemonte Orientale, Viale T. Michel 11, 15121 Alessandria (Italy)

2015-01-22

An implementation of the vector potential approach (VPA) for treating the response of infinite periodic systems to static and dynamic electric fields has been initiated within the CRYSTAL code. The VPA method is based on the solution of a time-dependent Hartree-Fock or Kohn-Sham equation for the crystal orbitals wherein the usual scalar potential, that describes interaction with the field, is replaced by the vector potential. This equation may be solved either by perturbation theory or by finite field methods. With some modification all the computational procedures of molecular ab initio quantum chemistry can be adapted for periodic systems. Accessible properties include the linear and nonlinear responses of both the nuclei and the electrons. The programming of static field pure electronic (hyper)polarizabilities has been successfully tested. Dynamic electronic (hyper)polarizabilities, as well as infrared and Raman intensities, are in progress while the addition of finite fields for calculation of vibrational (hyper)polarizabilities, through nuclear relaxation procedures, will begin shortly.

Electrical and non-electrical environment of wind turbine main components

DEFF Research Database (Denmark)

Holboell, J.; Henriksen, M.; Olsen, R.S.

of the electrical components or even lead to catastrophic component failure. In the present paper, results are presented from investigations on existing standards which give detailed descriptions of the environmental and operational conditions of wind turbine components. It is found that there is currently a lack...... of application standards for wind turbine electrical equipment. Component-level environmental requirements as given in equipment-specific standards are compared with the environment described in the IEC's 61400 series concerning wind turbines. Based on methods defined in IEC 60721, the non-electrical environment...... of wind turbine is described by means of specific classes. In the paper, new class combinations are suggested covering the different operating conditions the components are exposed to. The class combinations include factors of climatic, mechanical and chemical character. The factors occur in different...

Evaluation of Electrical Characteristics of Protective Equipment - a Prerequisite for Ensuring Safety and Health of Workers at Work

Science.gov (United States)

Buică, G.; Beiu, C.; Antonov, A.; Dobra, R.; Păsculescu, D.

2017-06-01

The protecting electrical equipment in use are subject to various factors generated by the use, maintenance, storage and working environment, which may change the characteristics of protection against electric shock. The study presents the results of research on the behaviour over time of protective characteristics of insulating covers of material of work equipment in use, in order to determine the type and periodicity of safety tests. There were tested and evaluated safety equipment with plastic and insulating rubber covers used in operations of verifying functionality, safety and maintenance of machinery used in manufacturing industries and specific services from electric, energy and food sector.

American Indian tribes and electric industry restructuring: Issues and opportunities

Energy Technology Data Exchange (ETDEWEB)

Howarth, D. [Morse, Richard, and Weisenmiller, and Associates Inc., Oakland, CA (United States); Busch, J. [Lawrence Berkeley National Lab., CA (United States); Starrs, T. [Kelso, Starrs, and Associates LLC, Vashon, WA (United States)

1997-07-01

The US electric utility industry is undergoing a period of fundamental change that has significant implications for Native American tribes. Although many details remain to be determined, the future electric power industry will be very different from that of the present. It is anticipated that the new competitive electric industry will be more efficient, which some believe will benefit all participants by lowering electricity costs. Recent developments in the industry, however, indicate that the restructuring process will likely benefit some parties at the expense of others. Given the historical experience and current situation of Native American tribes in the US, there is good reason to pay attention to electric industry changes to ensure that the situation of tribes is improved and not worsened as a result of electric restructuring. This paper provides a review of electricity restructuring in the US and identifies ways in which tribes may be affected and how tribes may seek to protect and serve their interests. Chapter 2 describes the current status of energy production and service on reservations. Chapter 3 provides an overview of the evolution of the electric industry to its present form and introduces the regulatory and structural changes presently taking place. Chapter 4 provides a more detailed discussion of changes in the US electric industry with a specific focus on the implications of these changes for tribes. Chapter 5 presents a summary of the conclusions reached in this paper.

On the stability of preferences and attitudes before and after experiencing an electric vehicle

DEFF Research Database (Denmark)

Jensen, Anders Fjendbo; Cherchi, Elisabetta; Mabit, Stefan Lindhard

2013-01-01

-wave stated preference experiment where data was collected before and after the respondents experienced an electric vehicle for three months. We estimate a hybrid choice model using jointly the stated choices before and after the test period. The results show that individual preferences change significantly......In this study, we investigate the extent to which experience affects individual preferences for specific electric vehicle characteristics, individual attitudes toward the environment, and the impact of the attitudes on the choice between an electric and a conventional vehicle. We use a two...... after a real experience with an electric vehicle in the household. In particular, there are major changes in the preference for driving range, top speed, fuel cost, battery life and charging in city centres and train stations. In line with other studies, we find that environmental concern has a positive...

Region-specific study of the electric utility industry. Phase I, final report

International Nuclear Information System (INIS)

Wacaster, A.J.

1985-07-01

This report describes the financial background of the electric utility industry in VACAR, reports on the present condition of the industry and then assesses the future of this industry. The Virginia-Carolinas subregion (VACAR) of the Southeastern Electric Reliability Council (SERC) was selected for this regional study because of its cooperativeness and its representative mix of powerplants, for example coal, hydro, nuclear, oil. It was found that the supply of future economic electricity is in jeopardy because of the regulatory process, the increasing risk associated with large scale generating stations and the weakening of the nuclear option. A number of options for the future were considered, including deregulation, government ownership and retaining the present system with modifications. The option selected to improve the present condition of the electricity industry was to make the present system work. The present system is sound, and with modifications, problems could be solved within the existing framework. 8 figs., 4 tabs

Greenhouse gas emissions from shale gas and coal for electricity generation in South Africa

Directory of Open Access Journals (Sweden)

Brett Cohen

2014-03-01

Full Text Available There is increased interest, both in South Africa and globally, in the use of shale gas for electricity and energy supply. The exploitation of shale gas is, however, not without controversy, because of the reported environmental impacts associated with its extraction. The focus of this article is on the greenhouse gas footprint of shale gas, which some literature suggests may be higher than what would have been expected as a consequence of the contribution of fugitive emissions during extraction, processing and transport. Based on some studies, it has been suggested that life-cycle emissions may be higher than those from coal-fired power. Here we review a number of studies and analyse the data to provide a view of the likely greenhouse gas emissions from producing electricity from shale gas, and compare these emissions to those of coal-fired power in South Africa. Consideration was given to critical assumptions that determine the relative performance of the two sources of feedstock for generating electricity � that is the global warming potential of methane and the extent of fugitive emissions. The present analysis suggests that a 100-year time horizon is appropriate in analysis related to climate change, over which period the relative contribution is lower than for shorter periods. The purpose is to limit temperature increase in the long term and the choice of metric should be appropriate. The analysis indicates that, regardless of the assumptions about fugitive emissions and the period over which global warming potential is assessed, shale gas has lower greenhouse gas emissions per MWh of electricity generated than coal. Depending on various factors, electricity from shale gas would have a specific emissions intensity between 0.3 tCO2/MWh and 0.6 tCO2/MWh, compared with about 1 tCO2/MWh for coal-fired electricity in South Africa.

Effect of maternal dry period length on colostrum immunoglobulin content and natural and specific antibody titers in calves

NARCIS (Netherlands)

Mayasari, N.; Vries Reilingh, de G.; Nieuwland, M.G.B.; Remmelink, G.J.; Parmentier, H.K.; Kemp, B.; Knegsel, van A.T.M.

2015-01-01

The objective was to study the effect of dry period length in dairy cows on immunoglobulin content and natural antibodies (NAb) titers in colostrum, growth, and plasma natural and specific antibody titers in plasma of calves. Holstein-Friesian dairy cows (n = 167) were randomly assigned to 3 dry

South Africa's electricity consumption: A sectoral decomposition analysis

International Nuclear Information System (INIS)

Inglesi-Lotz, Roula; Blignaut, James N.

2011-01-01

Highlights: → We conduct a decomposition exercise of the South African electricity consumption. → The increase in electricity consumption was due to output and structural changes. → The increasing at a low rate electricity intensity was a decreasing factor to consumption. → Increases in production were proven to be part of the rising trend for all sectors. → Only 5 sectors' consumption were negatively affected by efficiency improvements. -- Abstract: South Africa's electricity consumption has shown a sharp increase since the early 1990s. Here we conduct a sectoral decomposition analysis of the electricity consumption for the period 1993-2006 to determine the main drivers responsible for this increase. The results show that the increase was mainly due to output or production related factors, with structural changes playing a secondary role. While there is some evidence of efficiency improvements, indicated here as a slowdown in the rate of increase of electricity intensity, it was not nearly sufficient to offset the combined production and structural effects that propelled electricity consumption forward. This general economy-wide statement, however, can be misleading since the results, in essence, are very sector specific and the inter-sectoral differences are substantial. Increases in production were proven to be part of the rising trend for all sectors. However, only five out of fourteen sectors were affected by efficiency improvements, while the structural changes affected the sectors' electricity consumption in different ways. These differences concerning the production, structural and efficiency effects on the sectors indicate the need for a sectoral approach in the energy policy-making of the country rather than a blanket or unilateral economy-wide approach.

Plug-in electric vehicles integrating fluctuating renewable electricity

Energy Technology Data Exchange (ETDEWEB)

Dallinger, David

2013-11-01

This paper examines a method to model plug-in electric vehicles as part of the power system and presents results for the contribution of plug-in electric vehicles to balance the fluctuating electricity generation of renewable energy sources. The scientific contribution includes: - A novel approach to characterizing fluctuating generation. This allows the detailed comparison of results from energy analysis and is the basis to describe the effect of electricity from renewable energy sources and plug-in electric vehicles on the power system. - The characterization of mobile storage, which includes the description of mobility behavior using probabilities and battery discharging costs. - The introduction of an agent-based simulation approach, coupling energy markets and distributed grids using a price-based mechanism design. - The description of an agent with specific driving behavior, battery discharging costs and optimization algorithm suitable for real plug-in vehicles and simulation models. - A case study for a 2030 scenario describing the contribution of plug-in electric vehicles to balance generation from renewable energy sources in California and Germany.

Optimal Charging of Electric Vehicles with Trading on the Intraday Electricity Market

Directory of Open Access Journals (Sweden)

Ilham Naharudinsyah

2018-06-01

Full Text Available Trading on the energy market is a possible way to reduce the electricity costs of charging electric vehicles at public charging stations. In many European countries, it is possible to trade electricity until shortly before the period of delivery on so called intraday electricity markets. In the present work, the potential for reducing the electricity costs by trading on the intraday market is investigated using the example of the German market. Based on simulations, the authors reveal that by optimizing the charging schedule together with the trading on the intraday electricity market, the costs can be reduced by around 8% compared to purchasing all the required energy from the energy supplier. By allowing the charging station operator to resell the energy to the intraday electricity market, an additional cost reduction of around 1% can be achieved. Besides the potential cost savings, the impacts of the trading unit and of the lead time of the intraday electricity market on the costs are investigated. The authors reveal that the achievable electricity costs can be strongly affected by the lead time, while the trading unit has only a minor effect on the costs.

Electoral cycles in electricity losses in India

International Nuclear Information System (INIS)

Min, Brian; Golden, Miriam

2014-01-01

A third of electricity in India is lost each year, where losses refer to power that is supplied but not billed. Utilizing data from the power corporation of Uttar Pradesh, India's most populous state, we study the politics of electricity losses. Examining annual data over four decades, we document that UP's electricity losses tend to increase in periods immediately prior to state assembly elections. Drawing upon geographically disaggregated data for the period 2000–09, we observe higher line losses just prior to the 2002 and 2007 state elections. Our analysis shows that the incumbent party was more likely to retain the assembly seat as line losses in the locality increased. We interpret these results as corroboration that political parties deliberately redirect electricity to flat rate and unbilled users in a context of chronically inadequate supply. Political factors appear to affect line losses in ways that technical and economic factors alone cannot explain. - Highlights: • A third of electricity in India is lost each year. • Electricity losses increase by 3 percentage points in periods leading up to statewide elections in India's largest state. • Candidates are more likely to win re-election in areas where line losses are allowed to increase. • Political factors affect line losses in ways that technical and economic factors alone cannot explain

Very-low-frequency and low-frequency electric and magnetic fields associated with electric shuttle bus wireless charging

International Nuclear Information System (INIS)

Tell, R. A.; Kavet, R.; Bailey, J. R.; Halliwell, J.

2014-01-01

Tests conducted to date at the University of Tennessee at Chattanooga (UTC) indicate that wireless charging of the Chattanooga Area Regional Transportation Authority's (CARTA) downtown shuttle bus, currently operating with off-board battery charging technology, offers significant improvements in performance and cost. The system operates at a frequency of 20 kHz and a peak power of 60 kW. Because the system's wireless charging is expected to occur during a nominal 3-min charging period with passengers on-board, the magnetic and electric fields associated with charging were characterised at UTC's Advanced Vehicle Test Facility and compared with established human exposure limits. The two most prominent exposure limits are those published by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Institute for Electrical and Electronic Engineers (IEEE). Both organisations include limits for groups who are trained (workers in specific industries) to be aware of electromagnetic environments and their potential hazards, as well as a lower set of limits for the general public, who are assumed to lack such awareness. None of the magnetic or electric fields measured either within or outside the bus during charging exceeded either the ICNIRP or the IEEE exposure limits for the general public. (authors)

Deploying Electric Vehicles and Electric Vehicle Supply Equipment: Tiger Teams Offer Project Assistance for Federal Fleets

Energy Technology Data Exchange (ETDEWEB)

None

2017-01-02

To assist federal agencies with the transition to plug-in electric vehicles (PEVs), including battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs), FEMP offers technical guidance on electric vehicle supply equipment (EVSE) installations and site-specific planning through partnerships with the National Renewable Energy Laboratory’s EVSE Tiger Teams.

Energy policy strategies of the Baltic Sea Region for the post-Kyoto period - focusing on electricity and district heating generation

Energy Technology Data Exchange (ETDEWEB)

2012-05-15

This study presents a comprehensive analysis of energy policy strategies for the Baltic Sea Region for the post-Kyoto period. To this aim, the study provides scenarios for the region in order to develop a both secure and climate-compatible energy system for the year 2020 and beyond. The long-term development of the energy systems in the Baltic Sea Region is analysed, i.e. in Denmark, Estonia, Finland, Germany, Latvia, Lithuania, Norway, Poland, Sweden, and the north western part of Russia. The study focuses on the electricity and district heating sectors. The Baltic Sea Region is comprised of countries with very different economies and characteristics. Hydropower is an important source of electricity generation in Norway, Sweden, Finland and Latvia. Biomass resources are significant throughout the region, deriving from both agricultural residues and large forested areas. Wind power already contributes considerably to electricity generation in countries such as Denmark and Germany, and is likely to play a much greater role in the region in the years to come, both onshore and offshore. In the longer term (2030 and beyond), solar power and geothermal energy could also provide notable contributions to the overall energy supply. The study shows that it is technically possible to reduce greenhouse gas emissions in the electricity and district heating sectors of the Baltic Sea Region by close to 100% using mainly renewable energy sources. The results indicate that this is a challenging, but manageable task. The associated costs are moderate and can be further decreased through regional cooperation. Once the various production technologies have the possibility to interact with district heating and flexible electricity consumption, and transmission connections are optimally utilised, it becomes realistic to integrate e.g. large volumes of wind power into the energy system as a whole. Furthermore, the hydro power reservoirs, particularly in Norway, play a key role in

Ex Vivo Assay of Electrical Stimulation to Rat Sciatic Nerves: Cell Behaviors and Growth Factor Expression.

Science.gov (United States)

Du, Zhiyong; Bondarenko, Olexandr; Wang, Dingkun; Rouabhia, Mahmoud; Zhang, Ze

2016-06-01

Neurite outgrowth and axon regeneration are known to benefit from electrical stimulation. However, how neuritis and their surroundings react to electrical field is difficult to replicate by monolayer cell culture. In this work freshly harvested rat sciatic nerves were cultured and exposed to two types of electrical field, after which time the nerve tissues were immunohistologically stained and the expression of neurotrophic factors and cytokines were evaluated. ELISA assay was used to confirm the production of specific proteins. All cell populations survived the 48 h culture with little necrosis. Electrical stimulation was found to accelerate Wallerian degeneration and help Schwann cells to switch into migratory phenotype. Inductive electrical stimulation was shown to upregulate the secretion of multiple neurotrophic factors. Cellular distribution in nerve tissue was altered upon the application of an electrical field. This work thus presents an ex vivo model to study denervated axon in well controlled electrical field, bridging monolayer cell culture and animal experiment. It also demonstrated the critical role of electrical field distribution in regulating cellular activities. © 2015 Wiley Periodicals, Inc.

Fourteenth electric power survey of India

International Nuclear Information System (INIS)

1991-03-01

Fourteenth Electric Power Supply Committee was set up by the Government of India in February 1989 to review the demand projections for electric power, in detail, keeping in view the Eight Plan proposals and to project the perspective demand for (electric) power upto the year 2009-10. Partial End-use method was adopted for forecasting the power demands over a short term period. For estimating the power requirements on a long-term basis, the trend in overall requirements in a state system formed the basis of projections. The long term forecast covering the period 1995-96 to 2009-10 was made by extrapolating the overall requirement of electricity for various states and Union Territories with 1994-95 as the base year. The data were collected from various State Electricity Boards, Public utilities, concerned departments of State Governments and various Ministries and Departments of the Government of India and were computerised. The data base was used to develop a number of scenarios and to make projections. (M.G.B.)

Technical specifications: Susquehanna Steam Electric Station, Unit No. 2 (Docket No. 50-388). Appendix A to License No. NPF-22

International Nuclear Information System (INIS)

1984-03-01

Susquehanna Steam Electric Station, Unit 2 Technical Specifications were prepared by the US Nuclear Regulatory Commission to set forth the limits, operating conditions, and other requirements applicable to a nuclear reactor facility as set forth in Section 50.36 of 10 CFR Part 50 for the protection of the health and safety of the public

Decision support for the definition of wind turbine systems adequacy to site specificities and weak electrical networks

International Nuclear Information System (INIS)

Arbaoui, A.

2006-10-01

A decision support system for the definition of wind turbine systems is developed by taking into account the wind and site characteristics, the wind turbine components and the electrical network properties close to the site. The approach is based on functional analysis, on the investigation of the functional fluxes and on the definition of a model suitable for supporting decision at the preliminary stages of wind turbine design. The complete set of solutions derived from the model is determined using a Constraint Satisfaction Problem solver. The intrinsic capability of the model to support decision is derived from the investigation of the model parsimony, precision, exactness and specialization. The model takes into account performance criteria resulting from knowledge of manufacturers, distributors and investors. These criteria are used to discriminate design alternatives. Design alternatives correspond to choices of site (wind, electric network) and wind turbine architectures (related to 7 design variables). Performance criteria are the cost of electric kWh, the amount of energy being produced and the discounted total cost of the project. Electric network connection to wind turbines is taken into account through slow variations of the voltage and Flickers phenomenon. First, the maximal rate of penetration of the wind turbine energy production is determined. Next, two design alternatives have been investigated to improve wind turbine system integration in electric distribution networks. These alternatives are a reactive power control system and an inertial energy storage system. Inertial storage systems seem to be more expensive than reactive power control systems for this type of application. The influence of site specificities on decision making process has been established through three different sites (a Mediterranean site and two sites located in northern Europe). Profits relative to the cost of kWh appear to be high for Mediterranean sites. Most of the

Forecasting electricity consumption in Pakistan: the way forward

International Nuclear Information System (INIS)

Hussain, Anwar; Rahman, Muhammad; Memon, Junaid Alam

2016-01-01

Growing shortfall of electricity in Pakistan affects almost all sectors of its economy. For proper policy formulation, it is imperative to have reliable forecasts of electricity consumption. This paper applies Holt-Winter and Autoregressive Integrated Moving Average (ARIMA) models on time series secondary data from 1980 to 2011 to forecast total and component wise electricity consumption in Pakistan. Results reveal that Holt-Winter is the appropriate model for forecasting electricity consumption in Pakistan. It also suggests that electricity consumption would continue to increase throughout the projected period and widen the consumption-production gap in case of failure to respond the issue appropriately. It further reveals that demand would be highest in the household sector as compared to all other sectors and the increase in the energy generation would be less than the increase in total electricity consumption throughout the projected period. The study discuss various options to reduce the demand-supply gap and provide reliable electricity to different sectors of the economy. - Highlights: • We forecast total and component wise electricity consumption for Pakistan. • Electricity shortfall in Pakistan will increase in future if same situation exists. • Various options exist to cope with the electricity crisis in the country. • Holt-winter model gives best forecasts for electricity consumption in the country.

The EDF catalogue of technical specifications (reference HN), standardization center; Catalogue des specifications techniques EDF (reference HN) centre de normalisation

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

A list of EDF technical specifications, valid at the 01/01/1996 date, is presented. Specifications domains such as electrical installations, equipment and materials, uninsulated and insulated conductors, measurement, control and command, electric power generating or transforming equipment, electrical appliances, telecommunications, electronic and computer systems, are covered

Dynamics of Electricity Demand in Lesotho: A Kalman Filter Approach

Directory of Open Access Journals (Sweden)

Thamae Retselisitsoe Isaiah

2015-04-01

Full Text Available This study provides an empirical analysis of the time-varying price and income elasticities of electricity demand in Lesotho for the period 1995-2012 using the Kalman filter approach. The results reveal that economic growth has been one of the main drivers of electricity consumption in Lesotho while electricity prices are found to play a less significant role since they are monopoly-driven and relatively low when compared to international standards. These findings imply that increases in electricity prices in Lesotho might not have a significant impact on consumption in the short-run. However, if the real electricity prices become too high over time, consumers might change their behavior and sensitivity to price and hence, energy policymakers will need to reconsider their impact in the long-run. Furthermore, several exogenous shocks seem to have affected the sensitivity of electricity demand during the period prior to regulation, which made individuals, businesses and agencies to be more sensitive to electricity costs. On the other hand, the period after regulation has been characterized by more stable and declining sensitivity of electricity demand. Therefore, factors such as regulation and changes in the country’s economic activities appear to have affected both price and income elasticities of electricity demand in Lesotho.

Electrical requirements for unshielded glove boxes

International Nuclear Information System (INIS)

1978-02-01

The specification relates to the general design and installation of electrical services required in unshielded glove boxes in which atmospheres of air, argon or nitrogen etc. may exist either temporarily or permanently. The specification does not apply to electrical services for glove boxes with flammable explosive atmospheres. (author)

Acute lethality data for Ontario's electric power generation sector effluents covering the period from December 1990 to May 1991

International Nuclear Information System (INIS)

Poirier, D.G.; Lee, J.T.; Mueller, M.C.; Westlake, G.F.

1995-01-01

Regulations require that electric power generation facilities monitor their liquid effluents. Acute lethality tests are simple, rapid standard methods for measuring potential impacts on aquatic ecosystems. These toxicity tests will detect harmful concentrations of chemicals and mixtures of compounds in effluents, but compliance with end of pipe limits for acute toxicity will not necessarily control all adverse environmental effects. In these tests, aquatic organisms were exposed to undiluted effluent, as well as a series of effluent dilutions for a fixed period of time. This report is a compilation of six months of test results. Typically the most toxic samples were taken from the waste treatment plant (WTP) neutral sumps. This was true for fossil fueled as well as for nuclear generating stations. tabs., figs

Energy, electricity and nuclear power estimates for the period up to 2030. 2007 ed

International Nuclear Information System (INIS)

2007-01-01

Reference Data Series No. 1 is an annual publication - currently in its twenty-seventh edition - containing estimates of energy, electricity and nuclear power trends up to the year 2030. Nuclear data presented are based on actual statistical data collected by the IAEA's Power Reactor Information System (PRIS). Energy and electricity data for 2006, however, are estimated, since the latest available information from the Department of Economic and Social Affairs of the United Nations is for 2004. Population data originate from the World Population Prospects (2003 Revision), published by the Population Division of the UN Department of Economic and Social Affairs, and the 2005 values are estimates. The future growth of energy, electricity and nuclear power up to the year 2030 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The energy forecasts carried out in increasing numbers over the last years by international, national and private organizations are based on a multiplicity of different assumptions and different aggregating procedures, which make their comparison and synthesis very difficult. The basic differences refer to such fundamental input data as: - World and regional scenarios of economic development; - Correlation of economic growth and energy consumption; - Assumptions on physical, economic and political constraints applying to energy production and consumption; - Future prices of different energy sources. The projections presented in this booklet are based on a compromise among: - National projections supplied by each country for a recent OECD/NEA study; - Indicators of development published by the World Bank in its World Development Indicators; - Estimates of energy, electricity and nuclear power growth continuously carried out by the IAEA in the wake of recent global and

ELECTRICAL AND THERMODYNAMIC PROPERTIES OF A COLLAGEN SOLUTION

Directory of Open Access Journals (Sweden)

Jaromír Štancl

2017-06-01

Full Text Available This paper focuses on measurements of the electrical properties, the specific heat capacity and the thermal conductivity of a collagen solution (7.19% mass fraction of native bovine collagen in water. The results of our experiments show that specific electrical conductivity of collagen solution is strongly dependent on temperature. The transition region of collagen to gelatin has been observed from the measured temperature dependence of specific electrical conductivity, and has been confirmed by specific heat capacity measurements by a differential scanning calorimetry.

Sustainable Use of Electricity

DEFF Research Database (Denmark)

Nørgaard, Jørgen

1998-01-01

An overview is presented of the need for keeping electricity consumption low, including a suggested definition of sustainable development. Specific attention is devoted to present and future electricity production´s contribution to the environmental problems. Prognoses are shown from before any...

Impacts of climate change on electricity network business

International Nuclear Information System (INIS)

Martikainen, A.

2006-04-01

Climate has a significant impact on the electricity network business. The electricity network is under the weather pressure all the time and it is planned and constructed to withstand normal climatic stresses. The electricity network that has been planned and constructed now, is expected to be in operation next 40 years. If climatic stresses change in this period, it can cause significant impacts on electricity network business. If the impacts of climate change are figured out in advance, it is possible to mitigate negative points of climate change and exploit the positive points. In this paper the impact of climate change on electricity network business is presented. The results are based on RCAO climate model scenarios. The climate predictions were composed to the period 2016. 2045. The period 1960.1990 was used as a control period. The climate predictions were composed for precipitation, temperature, hoarfrost, thunder, ground frost and wind. The impacts of the change of the climate variables on electricity network business were estimated from technical and economical points of view. The estimation was based on the change predictions of the climate variables. It is expected that climate change will cause more damages than benefits on the electricity network business. The increase of the number of network faults will be the most significant and demanding disadvantage caused by climate change. If networks are not improved to be more resistant for faults, then thunder, heavy snow and wind cause more damages especially to overhead lines in medium voltage network. Increasing precipitation and decreasing amount of ground frost weaken the strength of soil. The construction work will be more difficult with the present vehicles because wet and unfrozen ground can not carry heavy vehicles. As a consequence of increasing temperature, the demand of heating energy will decrease and the demand of cooling energy will increase. This is significant for the electricity

Limitation of Electrical Power in January

CERN Multimedia

2006-01-01

During maintenance work on CERN's 400 kV main electrical supply in Prevessin, the laboratory will be connected to the 130 kV Suisse network in Meyrin from 4 to 22 January. Due to the on-going LHC activities during this period, the power demand will be very close to the technical limitations of this source. The effort of every one to reduce the consumption of electrical energy during this period is vital to avoid powercuts caused by exceeding the maximum capacity of the system. Mario Batz TS/CV Gerard Cumer TS/EL

Limitation of Electrical Power in January

CERN Multimedia

2007-01-01

During maintenance work on CERN's 400 kV main electrical supply in Prevessin, the laboratory will be connected to the 130 kV Suisse network in Meyrin from 4 to 22 January. Due to the on-going LHC activities during this period, the power demand will be very close to the technical limitations of this source. The effort of every one to reduce the consumption of electrical energy during this period is vital to avoid powercuts caused by exceeding the maximum capacity of the system. Mario Batz TS/CV Gerard Cumer TS/EL

Improving arm function in chronic stroke: a pilot study of sensory amplitude electrical stimulation via glove electrode during task-specific training.

Science.gov (United States)

Sullivan, Jane; Girardi, Madeline; Hensley, Melissa; Rohaus, Jordan; Schewe, Clay; Whittey, Colby; Hansen, Piper; Muir, Kimberly

2015-06-01

To investigate the effects of sensory amplitude electrical stimulation (SES) delivered by glove electrode during task-specific exercise on arm movement, function, and sensation in chronic stroke. The design was an intervention pilot study, pre-test, post-test, follow-up design. The settings used were a university research laboratory and home-based intervention. Participants comprised of 11 individuals with chronic stroke (7.2 ± 4.1 years post onset) and moderate arm paresis, 10.82/20 ± 2.27 on the Stroke Rehabilitation Assessment of Movement (STREAM) - Arm Subscale. Participants were seven males and four females (mean age: 59 years). Participants were recruited from university-based database. Intervention- Participants engaged in task-specific training at home for 30 min, twice daily, for 5 weeks, while receiving SES via glove electrode. Participants received supervised task practice at least twice during intervention period for 1 hour. Main outcome measures- Jebsen-Taylor Hand Function Test (JTHFT), STREAM - Arm Subscale, Motor Activity Log-14 (MAL-14) - Amount and Quality Subscales, and Nottingham Stereognosis Assessment (NSA). Significant changes were found in group mean pre- and post-test comparisons on the NSA (P = 0.042), MAL amount subscale (P = 0.047), and JTHFT (with writing item 29 excluded) (P = 0.003) and in pre-test to follow-up comparisons on NSA (P = 0.027) and JTHFT (writing item excluded) (P = 0.009). There was no significant change on the STREAM (P = 1.0). Individuals with a greater baseline motor capacity determined by STREAM scores (P = 0.048) and more recent stroke (P = 0.014) had significantly greater improvements. Combining task-specific training with glove-based SES in chronic stroke resulted in changes in arm sensation and function that were maintained at 3-month follow-up.

Rural Electricity and Isolated Systems

International Nuclear Information System (INIS)

Ruiz, Otto; Solorzano, Benjamin

2000-01-01

The paper describes the impact of the cost of investment, operation and trading of rural electricity and discuss cost-benefit analysis. This evaluation covers a three different periods: before 1990, the period 1990-1996 and 1997-1999. Also the trends of demand and supply of energy are presented

Swiss electricity statistics 2005

International Nuclear Information System (INIS)

2006-01-01

This comprehensive report made by the Swiss Federal Office of Energy (SFOE) presents the statistics for 2005 on electricity production and usage in Switzerland for the year 2005. First of all, an overview of Switzerland's electricity supply in 2005 is presented. Details are noted of the proportions generated by different sources including nuclear, hydro-power, storage schemes and thermal power stations as well as energy transfer with neighbouring countries. A second chapter takes a look at the balance of imports and exports with illustrative flow diagrams along with tables for total figures from 1950 through to 2005. For the summer and winter periods, figures from 1995 to 2005 are presented. The third chapter examines the production of electricity in the various types of power stations and the developments over the years 1950 to 2005, whereby, for example, statistics on regional generation and power station type are looked at. The fourth chapter looks at electricity consumption in various sectors from 1983 to 2005 and compares the figures with international data. The fifth chapter looks at generation, consumption and loading on particular days and chapter six considers energy exchange with Switzerland's neighbours. Chapter seven takes a look at possibilities for extending generation facilities in the period up to 2012

Swiss electricity statistics 2008

International Nuclear Information System (INIS)

2009-06-01

This comprehensive report made by the Swiss Federal Office of Energy (SFOE) presents the statistics for 2008 on electricity production and usage in Switzerland for the year 2008. First of all, an overview of Switzerland's electricity supply in 2008 is presented. Details are noted of the proportions generated by different sources including nuclear, hydro-power, storage schemes and thermal power stations as well as energy transfer with neighbouring countries. A second chapter takes a look at the balance of imports and exports with illustrative flow diagrams along with tables for total figures from 1950 through to 2008. For the summer and winter periods, figures from 1995 to 2008 are presented. The third chapter examines the production of electricity in the various types of power stations and the developments over the years 1950 to 2008, whereby, for example, statistics on regional generation and power station type are looked at. The fourth chapter looks at electricity consumption in various sectors from 1984 to 2008 and compares the figures with international data. The fifth chapter looks at generation, consumption and loading on particular days and chapter six considers energy exchange with Switzerland's neighbours. Chapter seven takes a look at possibilities for extending generation facilities in the period up to 2015

Swiss electricity statistics 2006

International Nuclear Information System (INIS)

2007-01-01

This comprehensive report made by the Swiss Federal Office of Energy (SFOE) presents the statistics on electricity production and usage in Switzerland for the year 2006. First of all, an overview of Switzerland's electricity supply in 2006 is presented. Details are noted of the amounts generated by different sources including nuclear, hydro-power, storage schemes and thermal power stations as well as energy transfer with neighbouring countries. A second chapter takes a look at the balance of imports and exports with illustrative flow diagrams along with tables for total figures from 1950 through to 2006. For the summer and winter periods, figures from 1995 to 2006 are presented. The third chapter examines the production of electricity in the various types of power stations and the developments over the years 1950 to 2006, whereby, for example, statistics on regional generation and power station type are looked at. The fourth chapter looks at electricity consumption in various sectors from 1983 to 2006 and compares the figures with international data. The fifth chapter looks at generation, consumption and loading on particular, selected days and chapter six considers energy exchange with Switzerland's neighbours. Chapter seven takes a look at possibilities for extending generation facilities in the period up to 2013

The Newnes guide to home electrics

CERN Document Server

Burdett, Geoffrey

2013-01-01

Home Electrics, Second Edition provides a do-it-yourself (DIY) guide to residential electric systems. The book is comprised of 15 chapters that cover the different aspects of home electrics. The topics covered in the text include electrical installation, rewiring, power circuits, electrical hardware, electrical repairs, tools, and safety. The book also discusses a specific area or function of home electronics, such as lighting system, lamps, electric cookers, and outdoor electrical extension. The book will be of great use to individuals interested in learning how to conduct proper home electri

Technical efficiency of Spanish electrical sector: analysis of 1998-2001 period

International Nuclear Information System (INIS)

Gutierrez Moya, E.; Arevalo Quijada, M. T.

2007-01-01

The aim of this article is to analyse the technical efficiency of the energy Spanish sector in the course of the stage of liberalization (1998-2001). The study uses the non parametric approach of DEA (Data Envelopment Analysis) to derive Malaquist productivity indexes. In the study there is revealed the improvement of productivity of the mentioned companies, as well as the major differentiation between electrical considered companies. (Author) 23 refs

Slovak electric power systems 1920 - 1994

International Nuclear Information System (INIS)

Sladek, V.

1996-01-01

The purpose of this book is to present the picture of more than 110-year old history of the building and maintenance of power stations in Slovakia. The beginnings were the same as elsewhere in the world. Small, local sources of electrical energy had been built for own needs and it had lasted for decades, until people realized that electricity could be produced for the whole communities and towns and that there was a possibility of the supply of the electricity for public. The purposeful electrification although started in this country only after the World War I, after the Law No. 438/1918 had been issued. While the period till the World War I has the character of endless experiments of utilizing electrical industry, transport, agriculture and households, the period after World War I is explicitly focused on building of unified electrification system for production, transport and distribution of electrical energy. Instead of course, the experts are trained for the first time at professional technical schools and after the year 1943 also at the School of Technology in Bratislava, the predecessor of the University of technology and at the other professional schools. Time is ready. The demand for electrical energy is growing together with the power of generators and voltage level of distribution lines. Besides the energy supply, also power plants, production and supply of heat started to be prosperous, especially in the regions where conditions for such activities had been provided. The changes in the 'power station family' are also registered in the legislative documents, which better present and explain the new historical circumstances. The lives of power station employees were deeply affected by many political and war event in the period of the World War II. In spite of this fact, they could manage their tasks also in these extraordinary conditions. The short part is about the social security of employees. The conclusion contains also basic conceptions envisaged for

Nuclear Electric Propulsion mission engineering study covering the period April 1971 to January 1973. Volume II. Final report

International Nuclear Information System (INIS)

1973-03-01

The results of a mission engineering analysis of nuclear-thermionic electric propulsion spacecraft for unmanned interplanetary and geocentric missions are summarized. Critical technologies assessed are associated with the development of Nuclear Electric Propulsion (NEP), and the impact of its availability on future space programs. Specific areas of investigation include outer planet and comet rendezvous mission analysis, NEP Stage design for geocentric and interplanetary missions NEP system development cost and unit costs, and technology requirements for NEP Stage development. A multi-mission NEP Stage can be developed to perform both multiple geocentric and interplanetary missions. Development program costs for a 1983 launch would be of the order of $275 M, including hardware and reactor development, flight system hardware, and mission support. Recurring unit costs for flight NEP systems would be of the order of $25 M for a 120kWe NEP Stage. Identified pacing NEP technology requirements are the development of 20,000 full power hour ion thrusters and thermionic reactor, and the development of related power conditioning. The resulting NEP Stage design provides both inherent reliability and high payload mass capability. High payload mass capability can be translated into both low payload cost and high payload reliability. NEP Stage and payload integration is compatible with the Space Shuttle

Ontario electricity bill review

International Nuclear Information System (INIS)

O'Neill, G.

2003-01-01

Findings of an independent review of charges to electricity bills and recommendations to assist in the development of a standard, province-wide residential electricity bill for Ontario are discussed. The review was requested by the province's Minister of Energy in an effort to dispel growing confusion about the variations in customer billing practices used by the province's 90+ local distribution companies. Key recommendations and findings were as follows: (1)Consumer bill formats issued by local distribution companies should be more consumer-friendly, adhere to minimum design standards, adapt uniform terminology and common line charges; (2) charges on customer bills should be grouped into four standard line items, with full details available to customers: the four line items should be a basic service charge, a charge for delivering electricity to the customer, a charge for the electricity itself, and a separate charge for retiring the outstanding debt of the former Ontario Hydro; (3) bills should take advantage of opportunities for promoting province-wide energy conservation, such as encouraging the long-term use of interval meters, presenting historical consumption data on residential bills on a period-to-period basis, and education and communications initiatives. Details of the recommendations, including the calculation of the fixed and variable components of usage charges, an explanation of the concept of electricity system loss adjustments, a method for phasing in the recommendations, and the anticipated benefits to consumers are provided

Probabilistic analysis of 900 MWe PWR. Shutdown technical specifications

International Nuclear Information System (INIS)

Mattei, J.M.; Bars, G.

1987-11-01

During annual shutdown, preventive maintenance and modifications which are made on PWRs cause scheduled unavailabilities of equipment or systems which might harm the safety of the installation, in spite of the low level of decay heat during this period. The pumps in the auxiliary feedwater system, component cooling water system, service water system, the water injection arrays (LPIS, HPIS, CVCS), and the containment spray system may have scheduled unavailability, as well as the power supply of the electricity boards. The EDF utility is aware of the risks related to these situations for which accident procedures have been set up and hence has proposed limiting downtime for this equipment during the shutdown period, through technical specifications. The project defines the equipment required to ensure the functions important for safety during the various shutdown phases (criticality, water inventory, evacuation of decay heat, containment). In order to be able to judge the acceptability of these specifications, the IPSN, the technical support of the Service Central de Surete des Installations Nucleaires, has used probabilistic methodology to analyse the impact on the core melt probability of these specifications, for a French 900 MWe PWR

Study of electric field pulsation in helical plasmas

International Nuclear Information System (INIS)

Toda, S; Itoh, K

2011-01-01

A model for the experimental results of the periodic oscillation of the electric field, so-called the electric field pulsation, observed in the Compact Helical Device (Fujisawa et al 1998 Phys. Rev. Lett. 81 2256) and the Large Helical Device (Shimizu et al 2010 Plasma Fusion Res. 5 S1015) is presented. A self-generated oscillation of the radial electric field is shown as the simulation result in helical plasmas. The reduction of the anomalous transport diffusivity in the core region is observed due to the strong shear of the radial electric field when the positive electric field is shown in the core region in the periodic oscillation of E r . Two different time scales are found in the self-generated oscillation, which are the transport time scale and the fast time scale at the transition of the radial electric field. This oscillation because of the hysteresis characteristic is attributed to the electric field pulsation observed in helical plasmas. The parameter region of the condition for the self-generated oscillation is derived. It is shown that the multiple solutions of the radial electric field for the ambipolar condition are necessary but not sufficient for obtaining the self-generated oscillation.

A COMPARATIVE ANALYSIS OF ENERGY MANAGEMENT STRATEGIES FOR ELECTRIC VEHICLES

OpenAIRE

ÇAKAR, Fahri; YILMAZ, Musa; ASKER, Mehmet Emin

2016-01-01

In next two decade duration the electric car will participate a significant role in auto marketing. The electrical car use electric that is supported by current electrical network. Indeed the current electrical network cannot support the hole system in specific time in the case of loading electric car to it that will increase the demand in that specific time duration. To support the electric car energy requirement you have to manage both energy generation and energy consumption. The solution ...

Memristors in the electrical network of Aloe vera L.

Science.gov (United States)

Volkov, Alexander G; Reedus, Jada; Mitchell, Colee M; Tucket, Clayton; Forde-Tuckett, Victoria; Volkova, Maya I; Markin, Vladislav S; Chua, Leon

2014-01-01

A memristor is a resistor with memory, which is a non-linear passive two-terminal electrical element relating magnetic flux linkage and electrical charge. Here we found that memristors exist in vivo. The electrostimulation of the Aloe vera by bipolar sinusoidal or triangle periodic waves induce electrical responses with fingerprints of memristors. Uncouplers carbonylcyanide-3-chlorophenylhydrazone and carbonylcyanide-4-trifluoromethoxy-phenyl hydrazone decrease the amplitude of electrical responses at low and high frequencies of bipolar periodic sinusoidal or triangle electrostimulating waves. Memristive behavior of an electrical network in the Aloe vera is linked to the properties of voltage gated ion channels: the K+ channel blocker TEACl reduces the electric response to a conventional resistor. Our results demonstrate that a voltage gated K+ channel in the excitable tissue of plants has properties of a memristor. The discovery of memristors in plants creates a new direction in the modeling and understanding of electrical phenomena in plants. PMID:25763487

Guidelines for price cap regulation in the Dutch electricity sector for the period 2000-2003

International Nuclear Information System (INIS)

Burns, P.; Newbery, D.; Tjin, T.; Verdonkschot, I.; Buitelaar, T.; Van Gent, C.

2000-02-01

July 1999 The Netherlands Electricity Regulatory Service (DtE) published an Information and Consultation Document on the title subject. By means of price cap regulation tariffs are determined such that businesses are stimulated continuously to organize their total processes and operation as efficient as possible. In the consultation document a large number of questions with respect to the future organization and planning of the system of economic regulation of the electricity sector in the Netherlands can be found. Many reactions and answers were received, compiled and analyzed. The results are presented in this report, which forms the framework for the DtE to shape the economic regulation of the Dutch electricity sector

BLUE GOLD: HYDRO-ELECTRIC RENT IN CANADA

OpenAIRE

Glenn Jenkins; RICHARD ZUKER

1984-01-01

In this study, an attempt is made to develop estimates of the value of economic rent from production of hydro-electricity. These estimates are made for the year 1979, which is the latest period for which a comprehensive set of data was available at the time this work was undertaken. The estimates are developed for the hydro-electricity generated (or used) by electric utilities in four provinces: Quebec (including Churchill Falls), Ontario, Manitoba and British Columbia. These electric systems...

Peculiarities of electricity acquisition management

Directory of Open Access Journals (Sweden)

G. S. Armashova-Telnik

2018-01-01

Full Text Available In the current conditions for the implementation of economic guidelines for the development of the electric power industry, minimizing production costs is one of the key areas for enhancing the competitive advantages of energy enterprises. When determining a specific model for the purchase of electricity in the retail market, it is necessary to take into account the conditions of the electricity consumption regime, the marketing surcharges of the generating suppliers, the activity of the regional energy sales organizations, the price range and the scale of retail generation, the real cost of the product's withdrawal to the wholesale market. A number of provisions regarding the specifics of electricity purchase management, regulated by the Government of the Russian Federation, provide optimization of energy management processes in terms of reducing production costs, taking into account the factors of the constituent elements of the price for electricity and services of infrastructure organizations, which increases the economic efficiency of economic activities of the enterprise

Electricity pricing

International Nuclear Information System (INIS)

Wijayatunga, P.D.C.

1994-01-01

Electricity pricing in most countries, especially in the developing world, has been determined by traditional accounting criteria where it raises revenue requirements to cover the operating costs and a return on past and future capital investments in possible power systems. The use of economic principles to improve the total economic efficiency in the electricity industry is discussed. Basic marginal cost theory, long run marginal costing (LRMC) cost categories and rating periods, marginal capacity costs, marginal energy costs, consumer costs, short run marginal costing (SRMC), marginal cost of fuel, marginal cost of network losses, market clearing price, value of unserved energy and network quality of supply cost are discussed

Impacts of rising air temperatures on electric transmission ampacity and peak electricity load in the United States

Science.gov (United States)

Bartos, Matthew; Chester, Mikhail; Johnson, Nathan; Gorman, Brandon; Eisenberg, Daniel; Linkov, Igor; Bates, Matthew

2016-11-01

Climate change may constrain future electricity supply adequacy by reducing electric transmission capacity and increasing electricity demand. The carrying capacity of electric power cables decreases as ambient air temperatures rise; similarly, during the summer peak period, electricity loads typically increase with hotter air temperatures due to increased air conditioning usage. As atmospheric carbon concentrations increase, higher ambient air temperatures may strain power infrastructure by simultaneously reducing transmission capacity and increasing peak electricity load. We estimate the impacts of rising ambient air temperatures on electric transmission ampacity and peak per-capita electricity load for 121 planning areas in the United States using downscaled global climate model projections. Together, these planning areas account for roughly 80% of current peak summertime load. We estimate climate-attributable capacity reductions to transmission lines by constructing thermal models of representative conductors, then forcing these models with future temperature projections to determine the percent change in rated ampacity. Next, we assess the impact of climate change on electricity load by using historical relationships between ambient temperature and utility-scale summertime peak load to estimate the extent to which climate change will incur additional peak load increases. We find that by mid-century (2040-2060), increases in ambient air temperature may reduce average summertime transmission capacity by 1.9%-5.8% relative to the 1990-2010 reference period. At the same time, peak per-capita summertime loads may rise by 4.2%-15% on average due to increases in ambient air temperature. In the absence of energy efficiency gains, demand-side management programs and transmission infrastructure upgrades, these load increases have the potential to upset current assumptions about future electricity supply adequacy.

Electricity demand in Tunisia

International Nuclear Information System (INIS)

Gam, Imen; Ben Rejeb, Jaleleddine

2012-01-01

This paper examines the global electricity demand in Tunisia as a function of gross domestic product in constant price, the degree of urbanization, the average annual temperature, and the real electricity price per Kwh. This demand will be examined employing annual data over a period spanning almost thirty one years from 1976 to 2006. A long run relationship between the variables under consideration is determined using the Vector Autoregressive Regression. The empirical results suggest that the electricity demand in Tunisia is sensitive to its past value, any changes in gross domestic product and electricity price. The electricity price effects have a negative impact on long-run electricity consumption. However, the gross domestic product and the past value of electricity consumption have a positive effect. Moreover, the causality test reveals a unidirectional relationship between price and electricity consumption. Our empirical findings are effective to policy makers to maintain the electricity consumption in Tunisia by using the appropriate strategy. - Highlights: ► This paper examined the electricity demand in Tunisia in the long-run. ► The empirical analysis revealed that in the long-run the electricity demand is affected by changes in its past value, GDP in constant price and real electricity price. ► There is a unidirectional relationship between price and electricity consumption, that is to say, that the electricity price causes the consumption. ► Those results suggest that a pricing policy can be an effective instrument to rationalize the electricity consumption in Tunisia in the long-run.

Hofstadter spectrum in electric and magnetic fields

International Nuclear Information System (INIS)

Kunold, Alejandro; Torres, Manuel

2005-01-01

The problem of Bloch electrons in two dimensions subjected to magnetic and intense electric fields is investigated. Magnetic translations, electric evolution, and energy translation operators are used to specify the solutions of the Schroedinger equation. For rational values of the magnetic flux quanta per unit cell and commensurate orientations of the electric field relative to the original lattice, an extended superlattice can be defined and a complete set of mutually commuting space-time symmetry operators is obtained. Dynamics of the system is governed by a finite difference equation that exactly includes the effects of: an arbitrary periodic potential, an electric field orientated in a commensurable direction of the lattice, and coupling between Landau levels. A weak periodic potential broadens each Landau level in a series of minibands, separated by the corresponding minigaps. The addition of the electric field induces a series of avoided and exact crossing of the quasienergies, for sufficiently strong electric field the spectrum evolves into equally spaced discreet levels, in this 'magnetic Stark ladder' the energy separation is an integer multiple of hE/aB, with a the lattice parameter

Standard Technical Specifications General Electric plants, BWR/4:Bases (Sections 3.4-3.10). Volume 3, Revision 1

International Nuclear Information System (INIS)

1995-04-01

This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for General Electric BWR/4 Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the specifications for all chapters and sections of the improved STS. Volume 2 contains he Bases for Chapters 2.0 and 3.0, and Sections 3.1-3.3 of the improved STS. This document, Volume 3, contains the Bases for Sections 3.4-3.10 of the improved STS

Standard Technical Specifications General Electric plants, BWR/4: Bases (Sections 2.0-3.3). Volume 2, Revision 1

International Nuclear Information System (INIS)

1995-04-01

This report documents the results of the combined effort of the NRC and the industry produce improved Standard Technical Specifications (STS), Revision 1 for General Electric BWR/4 Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved ST or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume I contains the Specifications for all chapters and sections of the improved STS. This document, Volume 2, contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1-3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4-3.10 of the improved STS

Midday reversal of equatorial ionospheric electric field

Directory of Open Access Journals (Sweden)

R. G. Rastogi

1997-10-01

Full Text Available A comparative study of the geomagnetic and ionospheric data at equatorial and low-latitude stations in India over the 20 year period 1956–1975 is described. The reversal of the electric field in the ionosphere over the magnetic equator during the midday hours indicated by the disappearance of the equatorial sporadic E region echoes on the ionograms is a rare phenomenon occurring on about 1% of time. Most of these events are associated with geomagnetically active periods. By comparing the simultaneous geomagnetic H field at Kodaikanal and at Alibag during the geomagnetic storms it is shown that ring current decreases are observed at both stations. However, an additional westward electric field is superimposed in the ionosphere during the main phase of the storm which can be strong enough to temporarily reverse the normally eastward electric field in the dayside ionosphere. It is suggested that these electric fields associated with the V×Bz electric fields originate at the magnetopause due to the interaction of the solar wind and the interplanetary magnetic field.

Midday reversal of equatorial ionospheric electric field

Directory of Open Access Journals (Sweden)

R. G. Rastogi

Full Text Available A comparative study of the geomagnetic and ionospheric data at equatorial and low-latitude stations in India over the 20 year period 1956–1975 is described. The reversal of the electric field in the ionosphere over the magnetic equator during the midday hours indicated by the disappearance of the equatorial sporadic E region echoes on the ionograms is a rare phenomenon occurring on about 1% of time. Most of these events are associated with geomagnetically active periods. By comparing the simultaneous geomagnetic H field at Kodaikanal and at Alibag during the geomagnetic storms it is shown that ring current decreases are observed at both stations. However, an additional westward electric field is superimposed in the ionosphere during the main phase of the storm which can be strong enough to temporarily reverse the normally eastward electric field in the dayside ionosphere. It is suggested that these electric fields associated with the V×Bz electric fields originate at the magnetopause due to the interaction of the solar wind and the interplanetary magnetic field.

Materials and electricity

International Nuclear Information System (INIS)

Jaffee, R.I.

1986-01-01

Despite an increase in the intensity of electricity usage, electricity has been reversing its historical trend of reduced cost since 1970 to the point where costs are increasing faster than inflation. Designers and operators on both sides of the meter and the developers of materials from which the electric system is constructed must contribute to the lowering of costs and an increase in reliability for the generation, transmission and distribution, and utilization of electricity. Four specific cases illustrate the role of materials/process improvements to this end. The examples highlight the use of forged or welded integral rotors, improvements in the heat rate of coal-fired plants through higher steam conditions and reduced heat losses, reduced losses through amorphous steel cores for transformers, and reduced ac electric motor losses through silicon variable speed drives. 37 references, 27 figures, 9 tables

Decenal plan of electric energy expansion - 2006-2015

International Nuclear Information System (INIS)

2005-01-01

This report is divided into seven chapters and presents: 1) Introduction - a brief description of the institutional context of the study and the decenal planning role in this context; 2) electric power market - the evolution of market and economy conjuncture of electric power and the basic premises for the market projections, including the considered macroeconomic scenery description; 3) electric power generation - considered premises, methodology and criteria for the formulation and adjustment of generation expansion alternatives of electric power; 4) electric power transmission - main aspects which guided the evolution of the interlinked system reference configuration in the decenal period and a description of the main result of transmission system expansion analysis, consolidated by SIN geoelectric region and by each state of these regions; 5) socioenvironmental analysis - adopted methodology and the results of the socioenvironmental analysis for the foreseen business in the decenal horizon; 6) expansion indicators of the electric system - synthesizes the main indicators referring to the decenal period as far the market evolution, generation expansion and transmission is concerned; 7)bibliographic references

Decenal plan of electric energy expansion - 2006-2015

International Nuclear Information System (INIS)

2006-01-01

This report is divided into seven chapters and presents: 1) Introduction - a brief description of the institutional context of the study and the decenal planning role in this context; 2) electric power market - the evolution of market and economy conjuncture of electric power and the basic premises for the market projections, including the considered macroeconomic scenery description; 3) electric power generation - considered premises, methodology and criteria for the formulation and adjustment of generation expansion alternatives of electric power; 4) electric power transmission - main aspects which guided the evolution of the interlinked system reference configuration in the decenal period and a description of the main result of transmission system expansion analysis, consolidated by SIN geoelectric region and by each state of these regions; 5) socioenvironmental analysis - adopted methodology and the results of the socioenvironmental analysis for the foreseen business in the decenal horizon; 6) expansion indicators of the electric system - synthesizes the main indicators referring to the decenal period as far the market evolution, generation expansion and transmission is concerned; 7)bibliographic references

Calculation of coupling factor for double-period accelerating structure

International Nuclear Information System (INIS)

Bian Xiaohao; Chen Huaibi; Zheng Shuxin

2005-01-01

In the design of the linear accelerating structure, the coupling factor between cavities is a crucial parameter. The error of coupling factor accounts for the electric or magnetic field error mainly. To accurately design the coupling iris, the accurate calculation of coupling factor is essential. The numerical simulation is widely used to calculate the coupling factor now. By using MAFIA code, two methods have been applied to calculate the dispersion characteristics of the single-period structure, one method is to simulate the traveling wave mode by the period boundary condition; another method is to simulate the standing wave mode by the electrical boundary condition. In this work, the authors develop the two methods to calculate the coupling factor of double-period accelerating structure. Compared to experiment, the results for both methods are very similar, and in agreement with measurement within 15% deviation. (authors)

An Economic Evaluation of Binary Cycle Geothermal Electricity Production

National Research Council Canada - National Science Library

Fitzgerald, Crissie

2003-01-01

.... Variables such as well flow rate, geothermal gradient and electricity prices were varied to study their influence on the economic payback period for binary cycle geothermal electricity production...

Safety and operational aspects in in-situ electrical baking of large vacuum systems of Indus accelerators

International Nuclear Information System (INIS)

Bhatnagar, Prateek; Bhange, Nilesh; Joshi, Sujata; Sridhar, R.

2016-01-01

In order to achieve pressures in UHV (Ultra High Vacuum) range, the vacuum chambers and associated vacuum components, necessarily made of UHV compatible materials, should be baked sufficiently long enough so as to reduce outgassing rates. The baking period usually ranges from 48 hours to 72 hours for an electrical load of more than 30 kW per sector, in which baking temperatures, a characteristic parameter and specific to material, range from 150°C-180°C for Aluminium alloy and 250°C-300°C for SS (stainless steel). Indus accelerators vacuum installations include more than 300 m long vacuum chamber which are subjected to rigorous, standardized and labour intensive electrical baking procedure involving an intelligent ON-OFF distributed temperature control system with in-built defence of electrical safety and expandability as per the needs. The paper discusses various in built electrical safely features, operational aspects, work practices and challenges involved in accomplishing an interrupt free continuous electrical baking for distributed electrical load of more than 30 kW for a typical vacuum segment of Indus accelerator. (author)

Electricity and the Canadian economy

International Nuclear Information System (INIS)

Melvin, J.G.

1981-10-01

Electricity consumption in Canada bore a fixed relationship to real Gross National Product (GNP) throughout the period 1961 to 1979, with an annual growth rate equal to 1.275 times GNP growth rate. Data for the Province of Ontario reveal a similar correlation, but suggest an accelerated demand relative to Gross Provincial Product since 1973, perhaps due to cost-induced substitution of electricity for oil. Electricity demand growth and economic expansion are seen to be mutually reinforcing. High and low values are estimated for future growth rates of population and per-capita GNP. Combined with appropriate rates of oil substitution, these yield projections of electricity demand growth to the end of the century. Electricity demand is likely to grow at close to the traditional rate of 7% per annum unless economic stagnation continues, population growth is minimal, and electricity fails to substitute for oil on a significant scale

Report of the electric Equipment Service - Annex E

International Nuclear Information System (INIS)

Sanovic, V.

1990-01-01

This report describes organisational structure of the Service dealing with control and maintenance of electrical supply system and equipment. It includes detailed data about electric power consumption, power cuts and failures during the past period [sr

Report of the electric Equipment Service - Annex E

International Nuclear Information System (INIS)

Sanovic, V.

1987-01-01

This report describes organisational structure of the Service dealing with control and maintenance of electrical supply system and equipment. It includes detailed data about electric power consumption, power cuts and failures during the past period [sr

Report of the electric Equipment Service - Annex E

International Nuclear Information System (INIS)

Sanovic, V.

1988-01-01

This report describes organisational structure of the Service dealing with control and maintenance of electrical supply system and equipment. It includes detailed data about electric power consumption, power cuts and failures during the past period [sr

Report of the electric Equipment Service - Annex E

International Nuclear Information System (INIS)

Tanaskovic, M.

1995-01-01

This report describes organisational structure of the Service dealing with control and maintenance of electrical supply system and equipment. It includes detailed data about electric power consumption, power cuts and failures during the past period [sr

Prediction of compounds with electric and magnetic ordering

Energy Technology Data Exchange (ETDEWEB)

Nikiforov, L G [Rybinskij Aviatsionnyj Tekhnologicheskij Inst. (USSR)

1979-03-01

The possibility of polymorphic transformations from the structure of the pyrochlore type into that of the perovskite type for nine lead-containing compounds has been forecast. Some of them (PbTaO/sub 3/, Pb/sub 2/NiTaO/sub 6/, Pb/sub 2/MnTaO/sub 6/, Pb/sub 2/SmTaO/sub 6/) are expected to have, in addition to common for all lead-containing perovskites ferro-or antiferro-electric properties, specific magnetic properties. The periods of elementary cells of new perovskites are forecast. The possibility of considerable reduction of the number of errors when searching thermodynamical parameters of transformation has been shown.

Reducing electricity demand peaks by scheduling home appliances usage

Energy Technology Data Exchange (ETDEWEB)

Rossello-Busquet, A.; Kardaras, G.; Baek Iversen, V.; Soler, J.; Dittmann, L.

2011-05-15

Nowadays there is a tendency to consume electricity during the same period of the day leading to demand peaks. Regular energy consumption habits lead to demand peaks at specific temporal intervals, because users consume power at the same time. In order to avoid demand peaks, users' appliances should consume electricity in a more temporarily distributed way. A new methodology to schedule the usage of home appliances is proposed and analyzed in this paper. The main concept behind this approach is the aggregation of home appliances into priority classes and the definition of a maximum power consumption limit, which is not allowed to be exceeded during peak hours. The scenario simulated describes a modern household, where the electrical devices are classified in low and high priority groups. The high priority devices are always granted power in order to operate without temporal restrictions. On the contrary, the low priority devices have to pause their operation, when the algorithm dictates it, and resume it in the future. This can become beneficial for both energy companies and users. The electricity suppliers companies will be capable of regulating power generation during demand peaks periods. Moreover, users can be granted lower electricity bill rates for accepting delaying the operation of some of their appliances. In order to analyze this scenario, teletraffic engineering theory, which is used in evaluating the performance of telecommunication networks, is used. A reversible fair scheduling (RFS) algorithm, which was originally developed for telecommunication networks, is applied. The purpose is to analyze how a power consumption limit and priorities for home appliances will affect the demand peak and the users' everyday life. Verification of the effectiveness of the RFS algorithm is done by means of simulation and by using real data for power consumption and operation hours. The defined maximum power limit of 750 and 1000 Watt was not exceeded during

The Future of Electricity Resource Planning

Energy Technology Data Exchange (ETDEWEB)

Kahrl, Fredrich [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Mills, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lavin, Luke [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Ryan, Nancy [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Olsen, Arne [Energy and Environmental Economics, Inc., San Francisco, CA (United States); Schwartz, Lisa [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2016-09-14

Electricity resource planning is the process of identifying longer-term investments to meet electricity reliability requirements and public policy goals at a reasonable cost. Resource planning processes provide a forum for regulators, electric utilities, and electricity industry stakeholders to evaluate the economic, environmental, and social benefits and costs of different investment options. By facilitating a discussion on future goals, challenges and strategies, resource planning processes often play an important role in shaping utility business decisions. Resource planning emerged more than three decades ago in an era of transition, where declining electricity demand and rising costs spurred fundamental changes in electricity industry regulation and structure. Despite significant changes in the industry, resource planning continues to play an important role in supporting investment decision making. Over the next two decades, the electricity industry will again undergo a period of transition, driven by technological change, shifting customer preferences and public policy goals. This transition will bring about a gradual paradigm shift in resource planning, requiring changes in scope, approaches and methods. Even as it changes, resource planning will continue to be a central feature of the electricity industry. Its functions — ensuring the reliability of high voltage (“bulk”) power systems, enabling oversight of regulated utilities and facilitating low-cost compliance with public policy goals — are likely to grow in importance as the electricity industry enters a new period of technological, economic and regulatory change. This report examines the future of electricity resource planning in the context of a changing electricity industry. The report examines emerging issues and evolving practices in five key areas that will shape the future of resource planning: (1) central-scale generation, (2) distributed generation, (3) demand-side resources, (4

Realization of the Government Program in energy sector for the period 1995-1996

International Nuclear Information System (INIS)

Ovcharov, R.

1996-01-01

A short review of energy sector development in Bulgaria for the period 1995-1996 is presented. The paper gives generalized data on operation, maintenance and investment activities in coal production, uranium mines, electric power systems and thermal power plants. Financial situation and pricing policy for electricity are discussed. Special attention is paid to the problem of distribution and management of the governmental subsidy granted to the producers and ultimate consumers of electricity. During the two-year period of question the first steps have been taken towards transition from the administrative management of the energy sector to its economic regulation

Patient-specific electric field simulations and acceleration measurements for objective analysis of intraoperative stimulation tests in the thalamus

Directory of Open Access Journals (Sweden)

Simone Hemm-Ode

2016-11-01

Full Text Available Despite an increasing use of deep brain stimulation (DBS the fundamental mechanisms of action remain largely unknown. Simulation of electric entities has previously been proposed for chronic DBS combined with subjective symptom evaluations, but not for intraoperative stimulation tests. The present paper introduces a method for an objective exploitation of intraoperative stimulation test data to identify the optimal implant position of the chronic DBS lead by relating the electric field simulations to the patient-specific anatomy and the clinical effects quantified by accelerometry. To illustrate the feasibility of this approach, it was applied to five patients with essential tremor bilaterally implanted in the ventral intermediate nucleus (VIM. The VIM and its neighborhood structures were preoperatively outlined in 3D on white matter attenuated inversion recovery MR images. Quantitative intraoperative clinical assessments were performed using accelerometry. Electric field simulations (n = 272 for intraoperative stimulation test data performed along two trajectories per side were set-up using the finite element method for 143 stimulation test positions. The resulting electric field isosurface of 0.2V/mm was superimposed to the outlined anatomical structures. The percentage of volume of each structure's overlap was calculated and related to the corresponding clinical improvement. The proposed concept has been successfully applied to the five patients. For higher clinical improvements, not only the VIM but as well other neighboring structures were covered by the electric field isosurfaces. The percentage of the volumes of the VIM, of the nucleus intermediate lateral of the thalamus and the prelemniscal radiations within the prerubral field of Forel increased for clinical improvements higher than 50% compared to improvements lower than 50%. The presented new concept allows a detailed and objective analysis of a high amount of intraoperative data to

Electricity consumption and economic growth: evidence from Korea

International Nuclear Information System (INIS)

Yoo, Seung-Hoon

2005-01-01

This paper investigates the short- and long-run causality issues between electricity consumption and economic growth in Korea by using the co-integration and error-correction models. It employs annual data covering the period 1970-2002. The overall results show that there exists bi-directional causality between electricity consumption and economic growth. This means that an increase in electricity consumption directly affects economic growth and that economic growth also stimulates further electricity consumption

Export of electric power through industrial products

International Nuclear Information System (INIS)

Azevedo, J.B.L. de; David, J.M.S.; Campos, J.M.; Perecmanis, J.; Carneiro, N.S.

1990-01-01

We forecast the electrical energy incorporated to the exports of products of the industrial sectors of steel, aluminium, ferro-alloys, chlorine and caustic soda, pulp and paper and petrochemistry, accordingly to scenarios for these sectors consistent with a macro economic reference scenario, for the period 1990/2000. We also compare the electrical energy exported through those industrial products with the forecasted industrial and total markets of electrical energy. (author)

Design of grid connected PV systems considering electrical, economical and environmental aspects: A practical case

International Nuclear Information System (INIS)

Fernandez-Infantes, Alberto; Contreras, Javier; Bernal-Agustin, Jose L.

2006-01-01

This paper presents the complete design of a photovoltaic installation that may be either used for internal electric consumption or for sale using the premium subsidy awarded by the Spanish Government. Electric optimization strategies are detailed in the project, as well as the sizing of the photovoltaic installation and economic and financial issues related to it. The project optimizes the electricity demand, improving reactive power and studying the convenience of hourly discrimination fees in addition to the design of the photovoltaic installation. A specific computer application for the automated calculation of all relevant parameters of the installation-physical, electrical, economical as well as ecological-has been developed to make the process of calculating photovoltaic installations easier and to reduce the design development time. Moreover, the budget of the photovoltaic installation is included, as well as its corresponding financial ratios and payback periods. Finally, the conclusions reached in the technical and economic design of the installation are shown. (author)

Energy, electricity and nuclear power estimates for the period up to 2020. July 2002 ed

International Nuclear Information System (INIS)

2002-01-01

Reference Data Series No. 1 is an annual publication - currently in its twenty-second edition - containing estimates of energy, electricity and nuclear power trends up to the year 2020. Nuclear data presented in Table 1 are based on actual statistical data collected by the IAEA's Power Reactor Information System (PRIS). Energy and electricity data for 2001, however, are estimated, since the latest available information from the Department of Economic and Social Affairs of the United Nations is for 1999. Population data originate from the 'World Population Prospects' (2001 Revision), published by the Population Division of the UN Department of Economic and Social Affairs, and the 2001 values are estimates. The future growth of energy, electricity and nuclear power up to the year 2020 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The nuclear generating capacity estimates presented in Table 3 are derived from a country by country bottom-up approach. They are established by a group of experts participating each year in the IAEA's consultancy on Nuclear Capacity Projections and based upon a review of nuclear power projects and programmes in Member States. The total energy consumption has been calculated by summing the primary energy consumption and the net secondary energy import. The values shown in Table 9 refer to primary energy consumed for the generation of electricity. Owing to differences in conversion efficiencies, the percentage values are different from the shares of electricity generation presented in Tables 1 and 5

Electrical storm: clinical manifestations and management.

Science.gov (United States)

Littmann, L; Rennyson, S L

2007-10-01

Electrical storm is the clustering of hemodynamically destabilizing ventricular tachycardia or ventricular fibrillation that typically requires multiple electrical cardioversions or defibrillations within a 24-hour period. Electrical storm is frequently seen in the acute phase of myocardial infarction, in patients with the genetic arrhythmia syndromes, and in patients with implanted cardioverters-defibrillators. The evaluation and management should focus on the immediate suppression of the arrhythmia, a search for possible reversible causes, and attempts to prevent recurrences. In this review we present the most common conditions associated with electrical storm, therapeutic options for suppression of electrical storm, and new investigational techniques emerging for the treatment of electrical storm in refractory cases. The management of this life threatening arrhythmia typically requires the coordinated efforts of emergency medicine, critical care, cardiology, cardiac electrophysiology, and pacemaker experts.

Modeling of Monthly Residential and Commercial Electricity Consumption Using Nonlinear Seasonal Models—The Case of Hong Kong

Directory of Open Access Journals (Sweden)

Wai-Ming To

2017-06-01

Full Text Available Accurate modeling and forecasting monthly electricity consumption are the keys to optimizing energy management and planning. This paper examines the seasonal characteristics of electricity consumption in Hong Kong—a subtropical city with 7 million people. Using the data from January 1970 to December 2014, two novel nonlinear seasonal models for electricity consumption in the residential and commercial sectors were obtained. The models show that the city’s monthly residential and commercial electricity consumption patterns have different seasonal variations. Specifically, monthly residential electricity consumption (mainly for appliances and cooling in summer has a quadratic relationship with monthly mean air temperature, while monthly commercial electricity consumption has a linear relationship with monthly mean air temperature. The nonlinear seasonal models were used to predict residential and commercial electricity consumption for the period January 2015–December 2016. The correlations between the predicted and actual values were 0.976 for residential electricity consumption and 0.962 for commercial electricity consumption, respectively. The root mean square percentage errors for the predicted monthly residential and commercial electricity consumption were 7.0% and 6.5%, respectively. The new nonlinear seasonal models can be applied to other subtropical urban areas, and recommendations on the reduction of commercial electricity consumption are given.

Effect of iron ions and electric field on nitrification process in the periodic reversal bio-electrocoagulation system.

Science.gov (United States)

Qian, Guangsheng; Hu, Xiaomin; Li, Liang; Ye, Linlin; Lv, Weijian

2017-11-01

This study explored the nitrification mechanism of a periodic reversal bio-electrocoagulation system with Fe-C electrodes. The ammonia nitrogen removal was compared in four identical cylindrical sequencing bath reactors. Two of them were reactors with Fe-C electrodes (S1) and C-C electrodes (S2), respectively. The other two were a reactor with iron ions (S3) and a traditional SBR (S4), respectively. The results demonstrated that the effect on enhancing nitrification in S1 was the best among all four SBRs, followed by S3, S2 and S4. Iron ions increased the biomass, and electric field improved the proton transfer and enzyme activity. The dominant bacterial genera in the four SBRs were Hyphomicrobium, Thauera, Nitrobacter, Nitrosomonas, Paracoccus and Hydrogenophaga. The iron ions may increase the levels of Nitrosomonas and Nitrobacter, both of which were the main microbes of the nitrification process. This study provided a significant and meaningful understanding of nitrification in a bio-electrocoagulation system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Periodical inspection in nuclear power stations

International Nuclear Information System (INIS)

1986-01-01

Periodical inspection is presently being made of eight nuclear power plants in nuclear power stations. Up to the present time, in three of them, failures as follows have been observed. (1) Unit 3 (PWR) of the Mihama Power Station in The Kansai Electric Power Co., Inc. Nineteen heat-transfer tubes of the steam generators were plugged up due to failure. A fuel assembly with a failed spring fixture and in another the control-rod cluster with a failed control rod fixture were replaced. (2) Unit 2 (PWR) of the Oi Power Station in The Kansai Electric Power Co., Inc. Eight heat-transfer tubes of the heat exchangers were plugged up due to failure. (3) Unit 6 (BWR) of the Fukushima Nuclear Power Station I in The Tokyo Electric Power Co., Inc. A fuel assembly with leakage was replaced. (Mori, K.)

Reference costs of the electric power production

International Nuclear Information System (INIS)

2003-06-01

This study periodically realized by the DGEMP aims to compare the competitiveness of the different channels of electric power production, for different utilization conditions. The first part ''reference costs of the 2003 electric power production'' examines the prices of the electric power produced by different channels in particular in the framework of the industrial implementing in 2015. The nuclear and thermal power plants are concerned. The second part is devoted to the decentralized production channels (wind energy, photovoltaic, cogeneration heat-electricity) is under construction and will be presented next year. (A.L.B.)

Reflections of hunger and satiation in the structure of temporal organization of slow electrical and spike activities of fundal and antral stomach muscles in rabbits.

Science.gov (United States)

Kromin, A A; Zenina, O Yu

2012-11-01

Manifestations of hunger and satiation in myoelectric activity patterns in different portions of the stomach were studied in chronic experiments. The state of hunger manifested in the structure of temporal organization of slow electric activity of muscles in the stomach body and antrum in the form of bimodal distributions of slow electric wave periods, while satiation as unimodal distribution. In hunger-specific bimodal distribution of slow electric wave periods generated by muscles of the stomach body and antrum, the position of the first maximum carries the information about oncoming food reinforcement, since this particular range of slow wave fluctuations determines temporal parameters of slow electric activity of muscles in all stomach regions in the course of subsequent successive food-procuring behavior. Under conditions of hunger, the pacemaker features of muscles in the lesser curvature are realized incompletely. Complete realization is achieved in the course of food intake and at the state of satiation.

Impacts of climate change on electricity network business

International Nuclear Information System (INIS)

Auvinen, O.; Martikainen, A.

2006-01-01

In this project the impact of climate change on electricity network business was study. The results are based on RCAO climate model scenarios. The climate predictions were composed to the period 2016- 2045. The period 1960-1990 was used as a control period. The climate predictions were composed for precipitation, temperature, hoarfrost, thunder, ground frost and wind. Impacts of the change of the climate variables on electricity network business were estimated from technical and economical points of view. It is expected that climate change will cause more damages than benefits on the electricity network business. The increase of the number of network faults will be the most significant and demanding disadvantage caused by climate change in distribution network. If networks are not improved to be more resistant for faults, then thunder, heavy snow and wind cause more damages especially to overhead lines in medium voltage network. Increasing precipitation and decreasing amount of ground frost weaken the strength of soil. The construction work will be more difficult with the present vehicles because wet and unfrozen ground can not carry heavy vehicles. As a consequence of increasing temperature, the demand of heating energy will decrease and the demand of cooling energy will increase. This is significant for the electricity consumption and the peak load of temperature-dependent electricity users. (orig.)

Privatising British electricity

International Nuclear Information System (INIS)

Holmes, A.

1992-01-01

The privatisation of the British electricity industry was intended to be the most radical change made to a European power system in the post-war period. It was of an experimental nature, imposing on electricity a way of operating which has no equivalent anywhere in the world. This report shows, however, that in the long run-up to privatisation, a number of factors combined to pull the plan far from its original aims and to produce a hybrid system which has caused many new difficulties without establishing a fully commercial market. The original ideas behind the new system - most notably the establishment of a fully competitive commercial system - have not been fulfilled. Many of them were wholly impractical. The problems of establishing a competitive market in electricity were never properly addressed until the planning for the new system was well under way. (author)

Results of evaluation of periodic safety review for No. 1 plant in Fukushima No. 1 Nuclear Power Station, Tokyo Electric Power Co., Inc

International Nuclear Information System (INIS)

1994-01-01

No. 1 plant in Fukushima No. 1 Nuclear Power Station started the commercial power generation in March, 1971, and has continued the operation for more than 23 years. During this period, the countermeasures to troubles, periodic inspections, and the maintenance by the electric power company have been carried out. These states are to be recollected from the viewpoints of the comprehensive evaluation of the operation experiences and the reflection of the latest technological knowledge, and the safety and reliability are to be further improved in the periodic safety review. Agency of Natural Resources and Energy evaluated the report of the periodic safety review for No. 1 plant in Fukushima No. 1 Nuclear Power Station, and summarized the results. The course of the evaluation of the report is shown. The facility utilization factor was 50.1% on the average of about 23 years, but in the last 10 years, it was improved to 59.7%. In the last five years, the rate of occurrence of unexpected shutdown was 0.4 times/year. These are the results of preventive maintenance and the improvement of the facilities and operation management. Operation management, maintenance management, fuel management, radiation control, radioactive waste management and the reflection of the experience of troubles and the latest technological knowledge to the improvement of safety have been carried out properly. The work plan for disaster prevention was established. (K.I.)

Report of the electric Equipment Service - Annex E

International Nuclear Information System (INIS)

Karic, Z.

2002-01-01

This report describes organisational structure of the Service dealing with control and maintenance of electrical supply system and equipment. It includes detailed data about electric power consumption, power cuts and failures during the past period. Activity plan for year 2002 is included [sr

Effects of regulatory reforms in the electricity supply industry on electricity prices in developing countries

International Nuclear Information System (INIS)

Nagayama, Hiroaki

2007-01-01

Electric power sector reforms in the electricity supply industry have had an impact on industrial and household prices in developing countries in Latin America, the former Soviet Union, and Eastern Europe. Using original panel data for 83 countries during the period from 1985 to 2002, we examine how each policy instrument of the reform measures influenced electricity prices for countries in the above regions. We found that variables such as entry of independent power producers (IPP), unbundling of generation and transmission, establishment of a regulatory agency, and the introduction of a wholesale spot market have had a variety of impacts on electricity prices, some of which were not always consistent with expected results. The research findings suggest that neither unbundling nor introduction of a wholesale pool market on their own necessarily reduces the electric power price. In fact, contrary to expectations, there was a tendency for the price to rise. However, coexistent with an independent regulator, unbundling may work to reduce electricity prices. Privatization and the introduction of foreign IPP and retail competition lower electricity prices in some regions, but not all

An analytical optimization method for electric propulsion orbit transfer vehicles

International Nuclear Information System (INIS)

Oleson, S.R.

1993-01-01

Due to electric propulsion's inherent propellant mass savings over chemical propulsion, electric propulsion orbit transfer vehicles (EPOTVs) are a highly efficient mode of orbit transfer. When selecting an electric propulsion device (ion, MPD, or arcjet) and propellant for a particular mission, it is preferable to use quick, analytical system optimization methods instead of time intensive numerical integration methods. It is also of interest to determine each thruster's optimal operating characteristics for a specific mission. Analytical expressions are derived which determine the optimal specific impulse (Isp) for each type of electric thruster to maximize payload fraction for a desired thrusting time. These expressions take into account the variation of thruster efficiency with specific impulse. Verification of the method is made with representative electric propulsion values on a LEO-to-GEO mission. Application of the method to specific missions is discussed

Electricity Bill [second reading

International Nuclear Information System (INIS)

Hooper, G.; Williams, C.C.P.; Ezra, D.

1989-01-01

The Parliamentary Under-Secretary at the Department of Energy introduced the second reading of the Electricity Bill which provides for the restructuring and privatisation of the electricity supply industry throughout Great Britain. Three features at the heart of the Government's proposals are mentioned - first that the proposals will promote competition in electricity generation and supply of electricity so there will be a downward pressure on costs and prices, second is a new deal for customers and third is the security of electricity supply which will be ensured by the diversity of suppliers. The benefits of the scheme are outlined and then specific details of the Bill are considered. The debate which followed lasted six hours and is reported verbatim. The issues raised included environmental effects, efficiency, energy conservation, research and development and investment. (UK)

Exploring utility organization electricity generation, residential electricity consumption, and energy efficiency: A climatic approach

International Nuclear Information System (INIS)

Craig, Christopher A.; Feng, Song

2017-01-01

Highlights: • Study examined impact of electricity fuel sources and consumption on emissions. • 97.2% of variability in emissions explained by coal and residential electricity use. • Increasing cooling degree days significantly related to increased electricity use. • Effectiveness of state-level energy efficiency programs showed mixed results. - Abstract: This study examined the impact of electricity generation by fuel source type and electricity consumption on carbon emissions to assess the role of climatic variability and energy efficiency (EE) in the United States. Despite high levels of greenhouse gas emissions, residential electricity consumption continues to increase in the United States and fossil fuels are the primary fuel source of electricity generation. 97.2% of the variability in carbon emissions in the electricity industry was explained by electricity generation from coal and residential electricity consumption. The relationships between residential electricity consumption, short-term climatic variability, long-term climatic trends, short-term reduction in electricity from EE programs, and long-term trends in EE programs was examined. This is the first study of its nature to examine these relationships across the 48 contiguous United States. Inter-year and long-term trends in cooling degree days, or days above a baseline temperature, were the primary climatic drivers of residential electricity consumption. Cooling degree days increased across the majority of the United States during the study period, and shared a positive relationship with residential electricity consumption when findings were significant. The majority of electricity reduction from EE programs was negatively related to residential electricity consumption where findings were significant. However, the trend across the majority of states was a decrease in electricity reduction from EE while residential electricity consumption increased. States that successfully reduced consumption

Electricity regulation and economic growth

OpenAIRE

Costa, M. Teresa (Maria Teresa), 1951-; Garcia-Quevedo, Jose; Trujillo-Baute, Elisa

2018-01-01

The main objective of this paper is to analyse the effect of electricity regulation on economic growth. Although the relationship between electricity consumption and economic growth has been extensively analysed in the empirical literature, this framework has not been used to estimate the effect of electricity regulation on economic growth. Understanding this effect is essential for the assessment of regulatory policy. Specifically, we assess the effects of two major areas of regulation, rene...

Dynamics of spiral waves in a cardiac electromechanical model with a local electrical inhomogeneity

International Nuclear Information System (INIS)

Mesin, Luca

2012-01-01

Highlights: ► I study spirals in a model of electromechanical coupling in a cardiac tissue. ► The model is anisotropic and includes an electrical heterogeneity. ► Mechanical deformation is described under the active strain hypothesis. ► Joint effect of inhomogeneity and deformation influences spiral dynamics. ► Conductivity of stretch activated current is the parameter most affecting spirals. - Abstract: Joint effect of electrical heterogeneity (e.g. induced by ischemia) and mechanical deformation is investigated for an anisotropic, quasi–incompressible model of cardiac electromechanical coupling (EMC) using the active strain approach and periodic boundary conditions. Three local inhomogeneities with different geometry are simulated. Under a specific stimulation protocol, the heterogeneities are able to induce spirals. The interplay between the dimension of the electrical inhomogeneity, the EMC and the mechano-electrical feedback provided by the stretch activated current (SAC) determines the dynamics of the spiral waves of excitation, which could extinguish (in the case of low SAC), or be stable (with the tip rotating inside the inhomogeneity), or drift and be annihilated (in the case of high SAC).

Testing for convergence in electricity consumption across Croatian regions at the consumer's sectoral level

International Nuclear Information System (INIS)

Borozan, Djula

2017-01-01

Using the panel unit tests with and without structural break(s), the convergence hypothesis in relative per capita electricity consumption series is tested across Croatian regions during the period 2001–2013. The results are mixed, depending primarily on the consumption sector considered and the test applied. They indicate the necessity to conduct analysis and formulate energy policy measures on the sector-disaggregated and regional-specific electricity consumption time series. The Croatian electricity markets are not fully integrated, and some regions are faced with statistically significant structural break(s), demonstrating thereby the Croatian gradual energy reform process with several sudden innovations, significant regional differences, and the market dependence on expectations, domestic and international economic and non-economic innovations. The impacts of innovations are likely to be permanent for most of the regions, and their electricity consumption behaviours are likely to be path dependent. Consequently, innovations into the energy markets, including government interventions, may have long-run effects, indicating that space and time for experimenting with alternative mechanisms are quite limited.

Content analysis of 150 years of British periodicals.

Science.gov (United States)

Lansdall-Welfare, Thomas; Sudhahar, Saatviga; Thompson, James; Lewis, Justin; Cristianini, Nello

2017-01-24

Previous studies have shown that it is possible to detect macroscopic patterns of cultural change over periods of centuries by analyzing large textual time series, specifically digitized books. This method promises to empower scholars with a quantitative and data-driven tool to study culture and society, but its power has been limited by the use of data from books and simple analytics based essentially on word counts. This study addresses these problems by assembling a vast corpus of regional newspapers from the United Kingdom, incorporating very fine-grained geographical and temporal information that is not available for books. The corpus spans 150 years and is formed by millions of articles, representing 14% of all British regional outlets of the period. Simple content analysis of this corpus allowed us to detect specific events, like wars, epidemics, coronations, or conclaves, with high accuracy, whereas the use of more refined techniques from artificial intelligence enabled us to move beyond counting words by detecting references to named entities. These techniques allowed us to observe both a systematic underrepresentation and a steady increase of women in the news during the 20th century and the change of geographic focus for various concepts. We also estimate the dates when electricity overtook steam and trains overtook horses as a means of transportation, both around the year 1900, along with observing other cultural transitions. We believe that these data-driven approaches can complement the traditional method of close reading in detecting trends of continuity and change in historical corpora.

The Study for Optimizing of the Electricity Power Supply in Central Java Province

International Nuclear Information System (INIS)

Herdinie, Sc S; Sudi-Ariyanto; Edi-Sartono; Suprapto; Nuryanti

2004-01-01

Electricity planning includes identification of electricity generation potential and problem where solution are being planned through the annual program. Due to correlation between electricity growth and economic growth, the sensitivity study for Central Java province has been done using three scenarios of annual electricity growth, i.e.: 6.7 %, 8 % and 10 % within the study period of 2003-2020. The tool used in this sensitivity study is WASP IV. From result the calculation gives total installed capacity in the end of study period for each electricity growth scenario are 3960 MW, 5500 MW and 8620 MW respectively. Total produced energy in the end of study period for each electricity growth scenario are 32301 G Wh, 39619 G Wh and 54374 G Wh. For total fuel required. Coal still predominate in all scenarios, followed by HSD and Gas. According to this study, Nuclear power plant can be introduced in 2020 for scenario of 8 % growth and 2017 for that of 10 % growth. WASP is utilized for projecting electricity supply. (author)

Market surveillance panel monitoring report on the IMO-administered electricity markets for the first 18 months (May 2002 - October 2003)

International Nuclear Information System (INIS)

Gorbet, F.; McFetridge, D.; Rusnov, T.

2003-01-01

The Market Surveillance Panel is an independent body appointed by Ontario's Independent Electricity Market Operator. The Panel's mandate is to monitor the behaviour in the marketplace, examine the behaviour of specific market participants, investigate design rules and operating procedures, and provide periodic reports on the state of the marketplace. This third period report covers the first 18 months of the Ontario electricity marketplace from May 1, 2002 to October 31, 2003. The report includes an overall assessment of the evolution of the market with emphasis on what has worked well and needs improvement. It also includes a high level overview of market outcomes and basic data for comparison. Market performance that was outside of expected norms was explained. A status report is also presented on the IMO initiatives that have been in place since market opening to improve market performance. The Panel concluded that the electricity market is evolving in a manner that promotes market efficiency and system reliability. Demand for electricity in Ontario continues to increase. More Ontario-based generation was available in 2003 because of the addition of new and restored generation in the province and fewer significant outages. The Panel's reaction to the August 14, 2003 blackout was presented. The Interim report of the Canada-U.S. Power System Outage Task Force has indicated that the blackout was not caused by Ontario electricity markets. No correlation was found between the blackout and the restructuring of the electricity utility industry. Planned or forced outages can have a significant impact on price. Average prices for the off-peak period show an upward trend up to February 2003. 49 refs., 37 tabs., 15 figs

Electricity demand forecasting using regression, scenarios and pattern analysis

CSIR Research Space (South Africa)

Khuluse, S

2009-02-01

Full Text Available The objective of the study is to forecast national electricity demand patterns for a period of twenty years: total annual consumption and understanding seasonal effects. No constraint on the supply of electricity was assumed...

TEP Power Partners Project [Tucson Electric Power

Energy Technology Data Exchange (ETDEWEB)

None, None

2014-02-06

The Arizona Governor’s Office of Energy Policy, in partnership with Tucson Electric Power (TEP), Tendril, and Next Phase Energy (NPE), formed the TEP Power Partners pilot project to demonstrate how residential customers could access their energy usage data and third party applications using data obtained from an Automatic Meter Reading (AMR) network. The project applied for and was awarded a Smart Grid Data Access grant through the U.S. Department of Energy. The project participants’ goal for Phase I is to actively engage 1,700 residential customers to demonstrate sustained participation, reduction in energy usage (kWh) and cost ($), and measure related aspects of customer satisfaction. This Demonstration report presents a summary of the findings, effectiveness, and customer satisfaction with the 15-month TEP Power Partners pilot project. The objective of the program is to provide residential customers with energy consumption data from AMR metering and empower these participants to better manage their electricity use. The pilot recruitment goals included migrating 700 existing customers from the completed Power Partners Demand Response Load Control Project (DRLC), and enrolling 1,000 new participants. Upon conclusion of the project on November 19, 2013; 1,390 Home Area Networks (HANs) were registered; 797 new participants installed a HAN; Survey respondents’ are satisfied with the program and found value with a variety of specific program components; Survey respondents report feeling greater control over their energy usage and report taking energy savings actions in their homes after participating in the program; On average, 43 % of the participants returned to the web portal monthly and 15% returned weekly; and An impact evaluation was completed by Opinion Dynamics and found average participant savings for the treatment period1 to be 2.3% of their household use during this period.2 In total, the program saved 163 MWh in the treatment period of 2013.

Renewable Electricity Futures: Exploration of a U.S. Grid with 80% Renewable Electricity

Science.gov (United States)

Mai, Trieu

2013-04-01

Renewable Electricity Futures is an initial investigation of the extent to which renewable energy supply can meet the electricity demands of the contiguous United States over the next several decades. This study explores the implications and challenges of very high renewable electricity generation levels: from 30% up to 90% (focusing on 80%) of all U.S. electricity generation from renewable technologies in 2050. At such high levels of renewable electricity penetration, the unique characteristics of some renewable resources, specifically geographical distribution and variability and un-certainty in output, pose challenges to the operability of the nation's electric system. The study focuses on key technical implications of this environment from a national perspective, exploring whether the U.S. power system can supply electricity to meet customer demand on an hourly basis with high levels of renewable electricity, including variable wind and solar generation. The study also identifies some of the potential economic, environmental, and social implications of deploying and integrating high levels of renewable electricity in the U.S. The full report and associated supporting information is available at: http://www.nrel.gov/analysis/refutures/.

Monthly electric energy demand forecasting with neural networks and Fourier series

International Nuclear Information System (INIS)

Gonzalez-Romera, E.; Jaramillo-Moran, M.A.; Carmona-Fernandez, D.

2008-01-01

Medium-term electric energy demand forecasting is a useful tool for grid maintenance planning and market research of electric energy companies. Several methods, such as ARIMA, regression or artificial intelligence, have been usually used to carry out those predictions. Some approaches include weather or economic variables, which strongly influence electric energy demand. Economic variables usually influence the general series trend, while weather provides a periodic behavior because of its seasonal nature. This work investigates the periodic behavior of the Spanish monthly electric demand series, obtained by rejecting the trend from the consumption series. A novel hybrid approach is proposed: the periodic behavior is forecasted with a Fourier series while the trend is predicted with a neural network. Satisfactory results have been obtained, with a lower than 2% MAPE, which improve those reached when only neural networks or ARIMA were used for the same purpose. (author)

Field Evaluation of Medium-Duty Plug-in Electric Delivery Trucks

Energy Technology Data Exchange (ETDEWEB)

Prohaska, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Simpson, Mike [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ragatz, Adam [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kelly, Kenneth [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Kandler [National Renewable Energy Lab. (NREL), Golden, CO (United States); Walkowicz, Kevin [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

This report focuses on medium-duty electric delivery vehicles operated by Frito-Lay North America (FLNA) at its Federal Way, Washington, distribution center. The 100% electric drive system is an alternative to conventional diesel delivery trucks and reduces both energy consumption and carbon dioxide (CO2) emissions. The vehicles' drive cycles and operation are analyzed and compared to demonstrate the importance of matching specific electric vehicle (EV) technologies to the appropriate operational duty cycle. The results of this analysis show that the Smith Newton EVs demonstrated a 68% reduction in energy consumption over the data reporting period compared to the conventional diesel vehicles, as well as a 46.4% reduction in CO₂ equivalent emissions based on the local energy generation source. In addition to characterizing the in-use performance of the EVs compared to the conventional diesels, detailed facility load data were collected at the main building power feed as well as from each of the 10 EV chargers to better understand the broader implications associated with commercial EV deployment. These facility loads were incorporated into several modeling scenarios to demonstrate the potential benefits of integrating onsite renewables.

Improving a Complement-fixation Test for Equine Herpesvirus Type-1 by Pretreating Sera with Potassium Periodate to Reduce Non-specific Hemolysis

Science.gov (United States)

BANNAI, Hiroshi; NEMOTO, Manabu; TSUJIMURA, Koji; YAMANAKA, Takashi; KONDO, Takashi; MATSUMURA, Tomio

2013-01-01

Non-specific hemolysis has often been observed during complement-fixation (CF) tests for equine herpesvirus type-1 (EHV-1), even when the sera have virus-specific CF antibodies. This phenomenon has also been reported in CF tests for various infectious diseases of swine. We found that the sera from 22 of 85 field horses (25.9%) showed non-specific hemolysis during conventional CF testing for EHV-1. Because pretreatment of swine sera with potassium periodate (KIO4) improves the CF test for swine influenza, we applied this method to horse sera. As we expected, horse sera treated with KIO4 did not show non-specific hemolysis in the EHV-1 CF test, and precise determination of titers was achieved. PMID:24834005

A species-specific nucleosomal signature defines a periodic distribution of amino acids in proteins.

Science.gov (United States)

Quintales, Luis; Soriano, Ignacio; Vázquez, Enrique; Segurado, Mónica; Antequera, Francisco

2015-04-01

Nucleosomes are the basic structural units of chromatin. Most of the yeast genome is organized in a pattern of positioned nucleosomes that is stably maintained under a wide range of physiological conditions. In this work, we have searched for sequence determinants associated with positioned nucleosomes in four species of fission and budding yeasts. We show that mononucleosomal DNA follows a highly structured base composition pattern, which differs among species despite the high degree of histone conservation. These nucleosomal signatures are present in transcribed and non-transcribed regions across the genome. In the case of open reading frames, they correctly predict the relative distribution of codons on mononucleosomal DNA, and they also determine a periodicity in the average distribution of amino acids along the proteins. These results establish a direct and species-specific connection between the position of each codon around the histone octamer and protein composition.

Structural changes in industrial electricity use. The case of the pulp and paper industry in Sweden

Energy Technology Data Exchange (ETDEWEB)

Henriksson, E.; Lundmark, R. [Economics Unit, Department of Business Administration and Social Science, Luleaa University of Technology, SE-971 87 Lulea (Sweden)

2013-05-15

The purpose of this paper is to analyse altering energy demand patterns and energy factor substitution possibilities over time in the pulp and paper industry in order to increase our understanding of suitable policy options for increasing energy efficiency. The investigation employs a flexible translog cost function and an unbalanced panel data set covering 32 pulp and paper mills over the time period 1974-2005 in Sweden. Specifically, we test whether energy factor demand patterns in the industry for the period 1974-1990 differ from those during the latter period, 1991-2005. The empirical results reveal that even though the Swedish pulp and paper industry is relatively insensitive to changes in energy factor input prices in the short run, we find evidence of significant changes over time. According to the results, the own-price sensitivity of fuel has increased since the 1970s and the 1980s, thus indicating that fuel demand has become more sensitive to short-run changes in relative prices. The estimated cross-price elasticities between electricity and fuel also support the hypothesis of increased substitutability over time. However, the null hypothesis of an equal own-price elasticity of electricity demand across the two time periods cannot be rejected.

Age-specific infectious period shapes dynamics of pneumonia in bighorn sheep.

Science.gov (United States)

Plowright, Raina K; Manlove, Kezia R; Besser, Thomas E; Páez, David J; Andrews, Kimberly R; Matthews, Patrick E; Waits, Lisette P; Hudson, Peter J; Cassirer, E Frances

2017-10-01

Superspreading, the phenomenon where a small proportion of individuals contribute disproportionately to new infections, has profound effects on disease dynamics. Superspreading can arise through variation in contacts, infectiousness or infectious periods. The latter has received little attention, yet it drives the dynamics of many diseases of critical public health, livestock health and conservation concern. Here, we present rare evidence of variation in infectious periods underlying a superspreading phenomenon in a free-ranging wildlife system. We detected persistent infections of Mycoplasma ovipneumoniae, the primary causative agent of pneumonia in bighorn sheep (Ovis canadensis), in a small number of older individuals that were homozygous at an immunologically relevant genetic locus. Interactions among age-structure, genetic composition and infectious periods may drive feedbacks in disease dynamics that determine the magnitude of population response to infection. Accordingly, variation in initial conditions may explain divergent population responses to infection that range from recovery to catastrophic decline and extirpation. © 2017 John Wiley & Sons Ltd/CNRS.

Chemical Detection using Electrically Open Circuits having no Electrical Connections

Science.gov (United States)

Woodward, Stanley E.; Olgesby, Donald M.; Taylor, Bryant D.; Shams, Qamar A.

2008-01-01

This paper presents investigations to date on chemical detection using a recently developed method for designing, powering and interrogating sensors as electrically open circuits having no electrical connections. In lieu of having each sensor from a closed circuit with multiple electrically connected components, an electrically conductive geometric pattern that is powered using oscillating magnetic fields and capable of storing an electric field and a magnetic field without the need of a closed circuit or electrical connections is used. When electrically active, the patterns respond with their own magnetic field whose frequency, amplitude and bandwidth can be correlated with the magnitude of the physical quantities being measured. Preliminary experimental results of using two different detection approaches will be presented. In one method, a thin film of a reactant is deposited on the surface of the open-circuit sensor. Exposure to a specific targeted reactant shifts the resonant frequency of the sensor. In the second method, a coating of conductive material is placed on a thin non-conductive plastic sheet that is placed over the surface of the sensor. There is no physical contact between the sensor and the electrically conductive material. When the conductive material is exposed to a targeted reactant, a chemical reaction occurs that renders the material non-conductive. The change in the material s electrical resistance within the magnetic field of the sensor alters the sensor s response bandwidth and amplitude, allowing detection of the reaction without having the reactants in physical contact with the sensor.

Atmospheric Electricity and Tethered Aerostats, Volume 1

Science.gov (United States)

1976-05-11

CATALOG NUMBER AFETR -TR-76-07 __ 4. TITLE (and Subtitle) -. TYPE OF REPORT & PERIOD COVERED ATMOSPHERIC ELECTRICITY AND TETHERED AEROSTATS, FINAL. 1...Electricity Faraday Capes Balloons Lightning Effects , Protection, Warning Systems Conducting and Non-Conducting ’Tethers Potential Geadient Anomalies...and identifying feasible protective systems. After a brief introductory section math models of effects of tethered balloons on surrounding

Search for a neutron electric dipole moment

Energy Technology Data Exchange (ETDEWEB)

Morse, J [Rutherford Appleton Laboratory, Chilton (U.K.)

1984-03-01

To search for evidence of a breakdown of symmetry under the time reversal transformation, a magnetic resonance measurement is made to detect an electric dipole moment (EDM) of ultracold neutrons stored for periods approximately= 60s in the presence of a strong electric field. The measured neutron EDM is (0.3 +- 4.8) x 10/sup -25/ ecm.

Specific features of elite bodybuilders’ training process in competition period

Directory of Open Access Journals (Sweden)

A.A. Tihorsky

2016-12-01

Full Text Available Purpose: To substantiate methodic of training process construction for elite bodybuilders in competition period with usage of different training methods. Material: elite bodybuilders - members of combined team of Ukraine (n=16 participated in the research. Results: we presented comparative characteristic of the most often used bodybuilding training methodic. Besides, optimal training methodic in competition period was worked out and substantiated. Such methodic permits to improve body proportions at the account of fat layer reduction. By the data of Harvard step-test the sportsmen improved organism’s functional potentials by 6%. Conclusions: the offered methodic noticeably reduces probability of functional unfavorable states (over-training, overloading, traumas. The methodic permits to achieve the required sport form without over-tension adaptation-compensatory mechanisms and acquire maximal muscular relief; improve proportions with minimal losses of muscles’ volume.

Modeling Residential Electricity Consumption Function in Malaysia: Time Series Approach

OpenAIRE

L. L. Ivy-Yap; H. A. Bekhet

2014-01-01

As the Malaysian residential electricity consumption continued to increase rapidly, effective energy policies, which address factors affecting residential electricity consumption, is urgently needed. This study attempts to investigate the relationship between residential electricity consumption (EC), real disposable income (Y), price of electricity (Pe) and population (Po) in Malaysia for 1978-2011 period. Unlike previous studies on Malaysia, the current study focuses on the residential secto...

Poland - Electricity and gas market development study and practical guidelines for using EU funds. Electricity sector analyses

International Nuclear Information System (INIS)

2004-12-01

The present report is the final electricity sector analysis report in the project 'Poland - Electricity and gas market development study and practical guidelines for using EU funds'. As part of the project a number of quantitative analyses have been carried out for the electricity sector. The report presents the results of those electricity sector analyses. The present project aims at: 1. Identifying major issues relating to the restructuring and liberalization process in the Polish electricity and the gas sector, 2. Setting up an overview of the Polish electricity and natural gas sector, 3. Setting up scenarios for development of electricity and gas markets in the period to 2020, 4. Updating the Balmorel model with recent data for the Polish electricity system, 5. Analyzing future consequences of liberalization of energy markets for the producers, consumers and the Polish economy and society as a whole, 6. Presenting the possibilities and preparing a practical guide for using EU funds and community programmes for large infrastructure projects in the energy sector. (BA)

Energy, Electricity and Nuclear Power Estimates for the Period up to 2030. 2009 Ed

International Nuclear Information System (INIS)

2009-01-01

Reference Data Series No. 1 is an annual publication - currently in its twenty-ninth edition - containing estimates of energy, electricity and nuclear power trends up to the year 2030. The future growth of energy, electricity and nuclear power up to the year 2030 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The energy forecasts carried out in increasing numbers over the last years by international, national and private organizations are based on a multiplicity of different assumptions and different aggregating procedures, which make their comparison and synthesis very difficult. The basic differences refer to such fundamental input data as: - World and regional scenarios of economic development; - Correlation of economic growth and energy consumption; - Assumptions on physical, economic and political constraints applying to energy production and consumption; - Future prices of different energy sources. The projections presented in this booklet are based on a compromise among: - National projections supplied by each country for a recent OECD/NEA study; - Indicators of development published by the World Bank in its World Development Indicators; - Estimates of energy, electricity and nuclear power growth continuously carried out by the IAEA in the wake of recent global and regional projections made by other international organizations

Energy, electricity and nuclear power estimates for the period up to 2030. 2008 ed

International Nuclear Information System (INIS)

2008-01-01

Reference Data Series No. 1 is an annual publication containing estimates of energy, electricity and nuclear power trends up to the year 2030. The future growth of energy, electricity and nuclear power up to the year 2030 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The energy forecasts carried out in increasing numbers over the last years by international, national and private organizations are based on a multiplicity of different assumptions and different aggregating procedures, which make their comparison and synthesis very difficult.The basic differences refer to such fundamental input data as: World and regional scenarios of economic development; Correlation of economic growth and energy consumption; Assumptions on physical, economic and political constraints applying to energy production and consumption; Future prices of different energy sources. The projections presented in this booklet are based on a compromise among: National projections supplied by each country for a recent OECD/NEA study; Indicators of development published by the World Bank in its World Development Indicators; Estimates of energy, electricity and nuclear power growth continuously carried out by the IAEA in the wake of recent global and regional projections made by other international organizations

Electricity mix and ecological assessments. Consequences of the choice of specific electricity mixes in analyses of the environmental performance of products and services; Strommix in Oekobilanzen. Auswirkungen der Strommodellwahl fuer Produkt- und Betriebs-Oekobilanzen

Energy Technology Data Exchange (ETDEWEB)

Menard, M.; Dones, R.; Gantner, U

1998-12-01

The study aims at analysing the methodological issues associated with the definition of electricity mixes and discussing the consequences of the choice of specific electricity mixes in analyses of the environmental performance of products and services, based on Life Cycle Assessment (LCA). This report has been designed as a guideline to support LCA practitioners in the systematic identification of the most appropriate electricity mixes for LCA applications. A detailed checklist has been developed for this purpose. It includes the following items: type of electricity supply (from the net, self production, direct contracts); voltage level; country/place of utilisation; year of utilisation; season/daytime of utilisation; import/export model; and, marginal vs. average approach. A few examples, utilising published LCA studies, illustrate the impacts of the insights gained in the present work. Although primarily aimed at applications in Switzerland, the main concepts, the modelling and parts of the information provided can also be applied to other European countries. In addition to the three models proposed earlier for the assessment of the Swiss yearly average electricity mix, a new model (M4) has been developed in the frame of the present task in order to take into account the conditions characteristic for Switzerland as a transit land for electricity trades between its neighbour countries. All existing electricity mix models as well as selected environmental inventories are described and compared in the report. As an example of results, the CO{sub 2} emissions calculated for the Swiss yearly electricity supply mix are relatively small (48 g/kWh with model M4, as compared with 497 g/kWh for the average UCPTE mix). Key information on the structure of electricity generation and trade in Europe is provided. The modelling of the electricity supply for most of the European countries is less sensitive to the choice of an electricity model than for Switzerland. Considering

Essays on electricity theft

Science.gov (United States)

Steadman, Keva Ullanda

Electricity theft is a relatively unknown crime with high economic costs. In this dissertation, I try to identify the factors that motivate persons to steal electricity. First, I use a panel dataset of 97 countries spanning the five year period 2003--2007 to estimate a model that describes the effect of the unemployment rate, GDP per capita, male population and urbanization on theft, robbery and homicide rates. The results are consistent with previous empirical work on crime and economic opportunity. The second and main contribution of this paper is to estimate the same model using distribution loss as a proxy for electricity theft. The results show that the unemployment rate, a key explanatory economic factor for crime, cannot explain variation in electricity theft, although there is some evidence, albeit weak, supporting correlation in rich countries. Therefore, policies that target the reduction of property crime through a reduction in unemployment will have no effect on electricity theft. The third contribution relates to the role that political institutions play in the incentives to steal electricity. After control for socioeconomic factors, I find that there is no relationship between political governance indicators and electricity theft. In the second and third chapters, I compare the United States, a high income, low electricity theft country with Jamaica, a middle income, high electricity theft country. The effect of unemployment on electricity theft mirrors the results found in the first chapter. In the United States, electricity theft is affected by changes in economic conditions but in Jamaica, it is not. These results suggest that the state of institutions plays a role in how social norms are determined. Poor countries will be more likely than rich countries to have weak institutions with social norms that encourage electricity theft.

Electricity and gas market observatory. 2. Quarter 2008

International Nuclear Information System (INIS)

2008-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1 of July 2007, all customers can choose their gas and electricity suppliers. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status at June 30, 2008, Dynamic analysis: 2. Quarter 2008); The wholesale electricity market (Introduction, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market); B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on June 30, 2008, Dynamic analysis: 2. Quarter 2008); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Excess electricity diagrams and the integration of renewable energy

DEFF Research Database (Denmark)

Lund, Henrik

2004-01-01

The article presents a methodology of showing the rate of integration off specific renewable energy sources into the electricity supply system.......The article presents a methodology of showing the rate of integration off specific renewable energy sources into the electricity supply system....

Parametric analysis of technology and policy tradeoffs for conventional and electric light-duty vehicles

International Nuclear Information System (INIS)

Barter, Garrett E.; Reichmuth, David; Westbrook, Jessica; Malczynski, Leonard A.; West, Todd H.; Manley, Dawn K.; Guzman, Katherine D.; Edwards, Donna M.

2012-01-01

A parametric analysis is used to examine the supply demand interactions between the US light-duty vehicle (LDV) fleet, its fuels, and the corresponding primary energy sources through 2050. The analysis emphasizes competition between conventional internal combustion engine (ICE) vehicles, including hybrids, and electric vehicles (EVs), represented by both plug-in hybrid and battery electric vehicles. We find that EV market penetration could double relative to our baseline case with policies to extend consumers' effective payback period to 7 years. EVs can also reduce per vehicle petroleum consumption by up to 5% with opportunities to increase that fraction at higher adoption rates. However, EVs have limited ability to reduce LDV greenhouse gas (GHG) emissions with the current energy source mix. Alone, EVs cannot drive compliance with the most aggressive GHG emission reduction targets, even if the electricity grid shifts towards natural gas powered sources. Since ICEs will dominate the LDV fleet for up to 40 years, conventional vehicle efficiency improvements have the greatest potential for reductions in LDV GHG emissions and petroleum consumption over this time. Specifically, achieving fleet average efficiencies of 72 mpg or greater can reduce average GHG emissions by 70% and average petroleum consumption by 81%. - Highlights: ► Parametric analysis of the light duty vehicle fleet, its fuels, and energy sources. ► Conventional vehicles will dominate the fleet for up to 40 years. ► Improving gasoline powertrain efficiency is essential for GHG and oil use reduction. ► Electric vehicles have limited leverage over GHG emissions with the current grid mix. ► Consumer payback period extensions can double electric vehicle market share.

Electricity and gas market observatory. 1. quarter 2007

International Nuclear Information System (INIS)

2007-01-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at April 1, 2007, Dynamic analysis: 1. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 1. 2007 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at April 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary

Electricity and gas market observatory. 4. quarter 2006

International Nuclear Information System (INIS)

2007-01-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at January 1, 2007, Dynamic analysis: 4. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 4. 2006 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at January 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary

Electricity and gas market observatory. 1. quarter 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at April 1, 2007, Dynamic analysis: 1. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 1. 2007 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at April 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary.

Electricity and gas market observatory. 4. quarter 2006

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Eligible customer segments and their respective weights, Status at January 1, 2007, Dynamic analysis: 4. Quarter 2007; The wholesale electricity market: Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 4. 2006 quarter; The gas market; The retail gas market: The eligible customer segments and their respective weights, Status at January 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary.

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2012 Ed

International Nuclear Information System (INIS)

2012-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication - currently in its thirty-second edition - containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the situation of nuclear power in IAEA Member States as of the end of 2011. The data on nuclear power presented in Tables 1 and 2 are based on actual statistical data collected by the IAEA's power Reactor Information System (pRIS). however, energy and electricity data for 2011 are estimated, as the latest information available from the united Nations Department of Economic and Social Affairs is for 2009 only. population data originate from the world population prospects (2010 revision), published by the population Division of the united Nations Department of Economic and Social Affairs. The 2011 values again are estimates. As in previous editions, projections of future energy and electricity demand and the role of nuclear power are presented as low and high estimates encompassing the inherent uncertainties involved in projecting trends. The RDS-1 estimates should be viewed as very general growth trends whose validity must be constantly subjected to critical review. Many international, national and private organizations routinely engage in energy demand and supply projections, including nuclear power. These projections are based on a multitude of different assumptions and aggregating procedures, which make a straightforward comparison and synthesis very difficult. The basic differences refer to such fundamental input assumptions as: - Economic growth; - Correlation of economic growth and energy use; -Technology performance and costs; - Energy resource availability and future fuel prices; - Energy policy and physical, environmental and economic constraints. The projections presented in this publication are based on a compromise between: - National projections supplied by each country for a recent OECD/NEA study; - Indicators of development

Electrical stimulation for chronic non-specific low back pain in a working-age population: a 12-week double blinded randomized controlled trial.

Science.gov (United States)

Thiese, Matthew S; Hughes, Matthew; Biggs, Jeremy

2013-03-28

Non-invasive electrotherapy is commonly used for treatment of chronic low back pain. Evidence for efficacy of most electrotherapy modalities is weak or lacking. This study aims to execute a high-quality, double-blinded randomized controlled clinical trial comparing 1) H-Wave(®) Device stimulation plus usual care with 2) transcutaneous electrical nerve stimulation (TENS) plus usual care, and 3) Sham electrotherapy plus usual care to determine comparative efficacy for treatment of chronic non-specific low back pain patients. Chronic non-specific low back pain patients between ages of 18-65 years, with pain of at least 3 months duration and minimal current 5/10 VAS pain. Patients will have no significant signs or symptoms of lumbosacral nerve impingement, malignancy, spinal stenosis, or mood disorders. Double blind RCT with 3 arms and 38 subjects per arm. Randomization by permuted blocks of random length, stratified by Workers Compensation claim (yes vs. no), and use of opioids. The null hypothesis of this study is that there are no statistically significant differences in functional improvement between treatment types during and at the end of a 12-week week treatment period. Subjective data will be collected using Filemaker Pro™ database management collection tools. Objective data will be obtained through functional assessments. Data will be collected at enrollment and at 1, 4, 8, and 12 weeks for each participant by a blinded assessor. H-Wave(®) device stimulation (Intervention A) plus usual care, transcutaneous electrical nerve stimulation (TENS) (Intervention B) plus usual care, and sham electrotherapy plus usual care (control). Each treatment arm will have identical numbers of visits (4) and researcher contact time (approximately 15 hours). Oswestry Disability Index. Secondary measures include: Rowland Morris Instrument, VAS pain score, functional evaluation including strength when pushing and pulling, pain free range of motion in flexion and extension

The transition mechanism from a symmetric single period discharge to a period-doubling discharge in atmospheric helium dielectric-barrier discharge

International Nuclear Information System (INIS)

Zhang, Dingzong; Wang, Yanhui; Wang, Dezhen

2013-01-01

Period-doubling and chaos phenomenon have been frequently observed in atmospheric-pressure dielectric-barrier discharges. However, how a normal single period discharge bifurcates into period-doubling state is still unclear. In this paper, by changing the driving frequency, we study numerically the transition mechanisms from a normal single period discharge to a period-doubling state using a one-dimensional self-consistent fluid model. The results show that before a discharge bifurcates into a period-doubling state, it first deviates from its normal operation and transforms into an asymmetric single period discharge mode. Then the weaker discharge in this asymmetric discharge will be enhanced gradually with increasing of the frequency until it makes the subsequent discharge weaken and results in the discharge entering a period-doubling state. In the whole transition process, the spatial distribution of the charged particle density and the electric field plays a definitive role. The conclusions are further confirmed by changing the gap width and the amplitude of the applied voltage

The transition mechanism from a symmetric single period discharge to a period-doubling discharge in atmospheric helium dielectric-barrier discharge

Energy Technology Data Exchange (ETDEWEB)

Zhang, Dingzong; Wang, Yanhui; Wang, Dezhen [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

2013-06-15

Period-doubling and chaos phenomenon have been frequently observed in atmospheric-pressure dielectric-barrier discharges. However, how a normal single period discharge bifurcates into period-doubling state is still unclear. In this paper, by changing the driving frequency, we study numerically the transition mechanisms from a normal single period discharge to a period-doubling state using a one-dimensional self-consistent fluid model. The results show that before a discharge bifurcates into a period-doubling state, it first deviates from its normal operation and transforms into an asymmetric single period discharge mode. Then the weaker discharge in this asymmetric discharge will be enhanced gradually with increasing of the frequency until it makes the subsequent discharge weaken and results in the discharge entering a period-doubling state. In the whole transition process, the spatial distribution of the charged particle density and the electric field plays a definitive role. The conclusions are further confirmed by changing the gap width and the amplitude of the applied voltage.

Aversive olfactory associative memory loses odor specificity over time.

Science.gov (United States)

König, Christian; Antwi-Adjei, Emmanuel; Ganesan, Mathangi; Kilonzo, Kasyoka; Viswanathan, Vignesh; Durairaja, Archana; Voigt, Anne; Yarali, Ayse

2017-05-01

Avoiding associatively learned predictors of danger is crucial for survival. Aversive memories can, however, become counter-adaptive when they are overly generalized to harmless cues and contexts. In a fruit fly odor-electric shock associative memory paradigm, we found that learned avoidance lost its specificity for the trained odor and became general to novel odors within a day of training. We discuss the possible neural circuit mechanisms of this effect and highlight the parallelism to over-generalization of learned fear behavior after an incubation period in rodents and humans, with due relevance for post-traumatic stress disorder. © 2017. Published by The Company of Biologists Ltd.

Electrically heated DPF start-up strategy

Science.gov (United States)

Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

2012-04-10

An exhaust system that processes exhaust generated by an engine has a diesel particulate filter (DPF) that is disposed downstream of the engine and that filters particulates in the exhaust. An electrical heater is disposed upstream of the DPF and selectively heats the exhaust to initiate combustion of the particulates. Heat generated by combustion of particulates in the heater induces combustion of particulates within the DPF. A control module selectively enables current flow to the electrical heater for an initial period of a DPF regeneration cycle, and limits exhaust flow while the electrical heater is heating to a predetermined soot combustion temperature.

Nuclear Electric Propulsion mission engineering study covering the period April 1971 to January 1973. Volume I. Executive summary. Final report

International Nuclear Information System (INIS)

1973-03-01

The results of a mission engineering analysis of nuclear-thermionic electric propulsion spacecraft for unmanned interplanetary and geocentric missions are presented. Critical technologies assessed are associated with the development of Nuclear Electric Propulsion (NEP), and the impact of its availability on future space programs. Specific areas of investigation include outer planet and comet rendezvous mission analysis, NEP Stage design for geocentric and interplanetary missions, NEP system development cost and unit costs, and technology requirements for NEP Stage development. A multimission NEP Stage can be developed to perform both multiple geocentric and interplanetary missions. Development program costs for a 1983 launch would be of the order of $275 M, including hardware and reactor development, flight system hardware, and mission support. Recurring unit costs for flight NEP systems would be of the order of $25 M for a 120 kWe NEP Stage. Identified pacing NEP technology requirements are the development of 20,000 full power hour ion thrusters and thermionic reactor, and the development of related power conditioning. The resulting NEP Stage design provides both inherent reliability and high payload mass capability. High payload mass capability can be translated into both low payload cost and high payload reliability. NEP Stage and payload integration is compatible with the Space Shuttle

Shaping the future of electric utilities

International Nuclear Information System (INIS)

Byus, L.C.

1993-01-01

On December 14, 1992, Cincinnati Gas ampersand Electric Company (CG ampersand E) and PSI Resources, Inc. announced an agreement to merge the two companies into a newly formed company, CINergy Corp. In announcing the proposed merger, James E. Rogers Jr., chairman, president, and chief executive officer of PSI said, Our companies have chosen to shape our future and our industry. This is an ideal partnership, since our strengths complement each other and our vision of the future is the same. Will this merger be the first of many that will shape the future of the electric utility in the United States? What is the vision of the future for the industry? About five years ago, a well-known Wall Street utility analyst traveled around the country talking about the anticipated consolidation of electric utility companies in the US His motto was Fifty in Five, meaning widespread consolidation that would reduce the number of independent investor-owned utilities from more than 100 to 50 within a five-year period. He even developed a map showing the mergers/consolidations he looked for and actually named names. More than five years have passed, and only a handful of utility mergers have taken place. But, looking forward from 1992, restructuring of the utility industry is very much a vision of the future. What is the driving force? The National Energy Policy Act of 1992 provides the legislative framework for the electric utility industry in the US in future years. While the specific rules that will govern the industry are yet to be promulgated, the intent to allow (even promote) competition is evident in the Act itself. But it appears the vision of the future is market driven

Specific absorption rate and electric field measurements in the near field of six mobile phone base station antennas.

Science.gov (United States)

Toivonen, Tommi; Toivo, Tim; Puranen, Lauri; Jokela, Kari

2009-05-01

In this article, the exposure to radio frequency electromagnetic fields was studied in close proximity (distances of 10, 100, 300, and 600 mm) to six base station antennas. The specific absorption rate (SAR) in 800 mm x 500 mm x 200 mm box phantom as well as unperturbed electric field (E) in air was measured. The results were used to determine whether the measurement of local maximum of unperturbed electric field can be used as a compliance check for local exposure. Also, the conservativeness of this assessment method compared to the ICNIRP basic restriction was studied. Moreover, the assessment of whole-body exposure was discussed and the distance ranges presented in which the ICNIRP limit for local exposure could be exceeded before the limit for whole-body SAR. These results show that the electric field measurement alone can be used for easy compliance check for the local exposure at all distances and for all antenna types studied. However, in some cases when the local peak value of E was compared directly to the ICNIRP reference level for unperturbed E, the exposure was overestimated only very slightly (by factor 1.1) compared to the basic restriction for localized SAR in a human, and hence these results can not be generalized to all antenna types. Moreover, it was shown that the limit for localized exposure could be exceeded before the limit for the whole-body average SAR, if the distance to the antenna was less than 240 mm. Copyright 2009 Wiley-Liss, Inc.

Determination of Specific Losses in the Limbs of an Epstein Frame Using a Three Epstein Frame Methodology Applied to Grain Oriented Electrical Steels.

Science.gov (United States)

Parent, Guillaume; Penin, Rémi; Lecointe, Jean-Philippe; Brudny, Jean-François; Belgrand, Thierry

2016-06-04

An experimental method to characterize the magnetic properties of Grain Oriented Electrical Steel in the rolling direction is proposed in this paper. It relies on the use of three 25 cm Epstein frames combined to generate three test-frames of different lengths. This enables the identification of the effective specific losses of the electrical steel when magnetization is applied along the rolling direction. As a consequence, it evidences the deviation of the loss figures obtained using the standardised Epstein test. The difference in losses is explained by the fact that the described method gives "only" the losses attached to the straight parts. The concept of the magnetic path length as defined by the standard is discussed.

Energy, electricity and nuclear power estimates for the period up to 2020. July 2001 ed

International Nuclear Information System (INIS)

2001-01-01

Reference Data Series No. 1 is an annual publication, currently in its twenty-first edition, containing estimates of energy, electricity and nuclear power trends up to the year 2020. Nuclear data presented are based on actual statistical data collected by the IAEA Power Reactor Information System (PRIS). Energy and electricity data for 2000, however, are estimated, since the latest available information from the Department of Economic and Social Affairs of the United Nations is for 1998. Population data originate from the 'World Population Prospects' (1999 Revision), published by the Population Division of the UN Department of Economic and Social Affairs, and the 2000 values are estimates. The future growth of energy, electricity and nuclear power up to the year 2020 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The energy forecasts carried out in increasing numbers over the last years by international, national and private organizations are based on a multiplicity of different assumptions and different aggregating procedures, which make their comparison and synthesis very difficult. The basic differences refer to such fundamental input data as: World and regional scenarios of economic development; Correlation of economic growth and energy consumption; Assumptions on physical, economic and political constraints applying to energy production and consumption; Future prices of different energy sources. The projections presented in this booklet are based on a compromise among: National projections supplied by each country for a recent OECD NEA study; Indicators of development published by the World Bank in its World Development Indicators; Estimates of energy, electricity and nuclear power growth continuously carried out by the IAEA in the wake of recent global and regional

The impact of power market reforms on electricity price-cost margins and cross-subsidy levels: A cross country panel data analysis

International Nuclear Information System (INIS)

Erdogdu, Erkan

2011-01-01

One of the main expectations from power market reform has been a reduction in both price-cost margins and cross-subsidy levels between industrial and residential consumers. This paper focuses on this issue by looking at the impact of the electricity industry reforms on residential and industrial electricity price-cost margins and their effect on cross-subsidy levels between consumer groups. Using panel data for 63 developed and developing countries covering the period 1982-2009, empirical models are developed and analyzed. The research findings suggest that there is no uniform pattern for the impact of reform process as a whole on price-cost margins and cross-subsidy levels. Each individual reform step has different impact on price-cost margins and cross-subsidy levels for each consumer and country group. Our findings imply that reform steps have different impacts in different countries, which supports the idea reform prescription for a specific country cannot easily and successfully be transferred to another one. So, transferring the formal and economic structure of a successful power market in a developed country to developing countries is not a sufficient condition for good economic performance of the electricity industries in developing countries. Furthermore, the study suggests that power consumption, income level and country-specific features constitute other important determinants of electricity price-cost margins and cross-subsidy levels. - Research highlights: → The paper focuses on the impact of power market reforms on price-cost margins and cross-subsidy levels. → Using panel data for 63 countries for the period 1982-2009, empirical models are developed and analyzed. → We found that each individual reform step has different impact for each consumer and country group. → We conclude that reform prescription for a specific country cannot easily be transferred to another one.

Sectoral electricity elasticities in South Africa: Before and after the supply crisis of 2008

Directory of Open Access Journals (Sweden)

James Blignaut

2015-09-01

Full Text Available In this paper, we estimate the price elasticity of electricity for various industrial sectors of the South African economy from 2002 to 2011. The data used include sectoral electricity consumption data and electricity tariff data, both courtesy of Eskom as well as output data based on national statistics. The most important contribution this paper makes is that it includes the period after the sharp rises in electricity tariffs in 2007/2008 following a period of load-shedding and insecurity in electricity supply. Previous studies have included data only until 2007 and, for the most part, have found statistically insignificant, positive elasticities. However, for the period post-2007, we found statistically significant and negative elasticities for 9 of the 11 sectors considered. Our results show that the majority of industrial sectors have become much more sensitive to changes in the price of electricity following 2007/2008, indicating to policymakers that tariff restructuring might influence consumer behaviour significantly.

Electrical stimulation with periodic alternating intervals stimulates neuronal cells to produce neurotrophins and cytokines through activation of mitogen-activated protein kinase pathways.

Science.gov (United States)

Yamamoto, Kenta; Yamamoto, Toshiro; Honjo, Kenichi; Ichioka, Hiroaki; Oseko, Fumishige; Kishida, Tsunao; Mazda, Osam; Kanamura, Narisato

2015-12-01

Peripheral neuropathy is a representative complication of dental surgery. Electrical therapy, based on electrical stimulation with periodic alternating intervals (ES-PAI), may promote nerve regeneration after peripheral nerve injury in a non-invasive manner, potentially providing an effective therapy for neuropathy. This study aimed to analyze the molecular mechanisms underlying the nerve recovery stimulated by ES-PAI. In brief, ES-PAI was applied to a neuronal cell line, Neuro2A, at various intensities using the pulse generator apparatus, FREUDE. Cell viability, neurotrophin mRNA expression, and cytokine production were examined using a tetrazolium-based assay, real-time RT-PCR, and ELISA, respectively. Mitogen-activated protein kinase (MAPK) signaling was assessed using flow cytometry. It was found that ES-PAI increased the viability of cells and elevated expression of nerve growth factor (NGF) and neurotrophin-3 (NT-3); ESPAI also augmented vascular endothelial growth factor (VEGF) and platelet-derived growth factor (PDGF) expression, which was restored by addition of p38 inhibitors. Phosphorylation of p38 and extracellular signal-regulated kinase 1/2 (ERK-1/2) was augmented by ES-PAI. Hence, ES-PAI may ameliorate peripheral neuropathy by promoting neuronal cell proliferation and production of neurogenic factors by activating p38 and ERK-1/2 pathways. © 2015 Eur J Oral Sci.

Electric currents in cosmic plasmas

International Nuclear Information System (INIS)

Alfven, H.

1977-05-01

Since the beginning of the century physics has been dualistic in the sense that some phenomena are described by a field concept, others by a particle concept. This dualism is essential also in the physics of cosmical plasmas: some phenomena should be described by a magnetic field formalism, others by an electric current formalism. During the first period of evolution of cosmic plasma physics the magnetic field aspect has dominated, and a fairly exhaustive description has been given of those phenomena--like the propagation of waves--which can be described in this way. We have now entered a second period which is dominated by a systematic exploration of the particle (or current) aspect. A survey is given of a number of phenomena which can be understood only from the particle aspect. These include the formation of electric double layers, the origin of explosive events like magnetic substorms and solar flares, and further, the transfer of energy from one region to another. A useful method of exploring many of these phenomena is to draw the electric circuit in which the current flows and study its properties. A number of simple circuits are analyzed in this way. (author)

Hybrid Electric Energy Storages: Their Specific Features and Application (Review)

Science.gov (United States)

Popel', O. S.; Tarasenko, A. B.

2018-05-01

The article presents a review of various aspects related to development and practical use of hybrid electric energy storages (i.e., those uniting different energy storage technologies and devices in an integrated system) in transport and conventional and renewable power engineering applications. Such devices, which were initially developed for transport power installations, are increasingly being used by other consumers characterized by pronounced nonuniformities of their load schedule. A range of tasks solved using such energy storages is considered. It is shown that, owing to the advent of new types of energy storages and the extended spectrum of their performance characteristics, new possibilities for combining different types of energy storages and for developing hybrid systems have become available. This, in turn, opens up the possibility of making energy storages with better mass and dimension characteristics and achieving essentially lower operational costs. The possibility to secure more comfortable (base) operating modes of primary sources of energy (heat engines and renewable energy source based power installations) and to achieve a higher capacity utilization factor are unquestionable merits of hybrid energy storages. Development of optimal process circuit solutions, as well as energy conversion and control devices facilitating the fullest utilization of the properties of each individual energy storage included in the hybrid system, is among the important lines of research carried out in this field in Russia and abroad. Our review of existing developments has shown that there are no universal technical solutions in this field (the specific features of a consumer have an essential effect on the process circuit solutions and on the composition of a hybrid energy storage), a circumstance that dictates the need to extend the scope of investigations in this promising field.

Change in Nuclear Electric

International Nuclear Information System (INIS)

Smart, D.

1996-01-01

Activities of Nuclear Electric company (Great Britain) in 1990-1995, aimed at privatization of certain NPPs and services, are considered. The company introduced commercial principles of work and control in all areas of expenditures. Great attention was paid to the work with personnel according to the program Investments in Personnel. All these initiatives resulted in increase in the total electricity production by 39% during the period of time under consideration in the 100% increase in the output per man/hour. This made it possible for the government to introduce its proposal on privatization of greater part of companies

Hybrid component specification optimization for a medium-duty hybrid electric truck

NARCIS (Netherlands)

Hofman, T.; Steinbuch, M.; Druten, van R.M.; Serrarens, A.F.A.

2008-01-01

This paper presents a modelling and simulation approach for determining the optimal degree-of-hybridisation for the drive train (engine, electric machine size) and the energy storage system (battery, ultra capacitor) for a medium-duty truck. The results show that the degree-of-hybridisation of known

46 CFR 63.25-3 - Electric hot water supply boilers.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Electric hot water supply boilers. 63.25-3 Section 63.25... water supply boilers. (a) Electric hot water supply boilers that have a capacity not greater than 454... section except the periodic testing required by paragraph (j) of this section. Electric hot water supply...

Electric motor handbook

CERN Document Server

Chalmers, B J

2013-01-01

Electric Motor Handbook aims to give practical knowledge in a wide range of capacities such as plant design, equipment specification, commissioning, operation and maintenance. The book covers topics such as the modeling of steady-state motor performance; polyphase induction, synchronous, and a.c. commutator motors; ambient conditions, enclosures, cooling and loss dissipation; and electrical supply systems and motor drives. Also covered are topics such as variable-speed drives and motor control; materials and motor components; insulation types, systems, and techniques; and the installation, sit

Comparative assessment of electricity generation options in the Philippines

International Nuclear Information System (INIS)

Leonin, T.V.; Mundo, M.Q.; Venida, L.L.; Arriola, H.; Madrio, E.

2001-01-01

The development of a country specific data base on energy sources, facilities and technologies is presented in this paper. It also identified feasible national electricity generating options and electric power system expansion alternatives for the period 2000-2020, and conducted comparative assessments of these options based on economic and environmental considerations. The possible role of nuclear power in the country's future electric energy was also studied. The comparison of three electricity generating options were considered: coal-fired thermal power plant without flue gas desulfurization (FGD), coal-fired thermal power plant with FGD and combined cycle power plant with 300 MW generating capacity each. Based on the analysis of three alternatives, the use of coal-fired power plants equipped with flue gas desulfurization (FGD) should be seriously considered. The government is expected to pursue the full development of local energy sources such as hydropower, geothermal, coal, natural gas and other new and renewable energy sources. However, there will still be a major need for imported oil and coal fuel which will likely supply unidentified energy sources beyond 2010. In the case of nuclear power, the government has not firmed up definite plans for any construction of nuclear power plants after 2010. However, the long term energy development plan still includes the operation of at least two nuclear power plants by the 2020 and this long term range program has not been revised in the recent published updates. (Author)

Common issues concerning electric power and gas

International Nuclear Information System (INIS)

1996-01-01

EDF and GDF, the French government owned electric power and gas utilities have jointly decided to improve their employment and employee situation with the hiring of 11000 to 15000 young people for a 3-year period and the reduction of the working hours. A european disagreement is to be judged concerning electric power and gas import and export monopolies in several european countries

The capital investment and electricity cost of 2 x 600 MW PWR nuclear power plant in China

International Nuclear Information System (INIS)

Li Zhihua; Xing Leiming

1990-01-01

The capital investment and electricity cost of 2 x 600 MW PWR nuclear power plant in China are studied. If the rate of interest R 1 and of escalation R 2 are 7.2% and 10.0% respectively for RMB and the rate of interest R 1 and of escalation R 2 are 6.5% and 2.0% respectively for MK, the total investment is 9270 M RMB Yuan, the Specific investment is 7320 RMB Yuan/kW, the average selling electricity cost is 0.16 RMB Yuan/(kW·h). If the selling electricity price is 0.24 RMB Yuan/(kW·h), the rate of inner return is 7.7%, the dynamic return period is 13 years, the national income is 15800 M RMB Yuan, the profit of nuclear power plant after taxation is 6800 M RMB Yuan

Electric systems failures produced by CG lightning in Eastern Amazonia

Directory of Open Access Journals (Sweden)

Ana Paula Paes dos Santos

2014-12-01

Full Text Available Operational records of power outages of the electric energy distribution systems in eastern Amazonia presented a large number of events attributed to lightning strikes, during the 2006 to 2009 period. The regional electricity concessionary data were compared to actual lightning observations made by SIPAM's LDN system, over two areas where operational sub systems of transmission lines are installed. Statistical relations were drawn between the monthly lightning occurrence density and the number of power outages of the electric systems for both areas studied. The results showed that, although with some delays between these variables peaks, the number of power disruptions has a tendency to follow the behavior of the lightning occurrence densities variations. The numerical correlations were positive and may be useful to the transmission lines maintenance crews at least for the Belém-Castanhal electricity distribution sub system. Evidence was found, that the SST's over certain areas of the Pacific and Atlantic Oceans, influence convection over the area of interest, and may help to prognosticate the periods of intense electric storms, requiring repair readiness for the regional electric systems.

Enhancement of Light Localization in Hybrid Thue-Morse/Periodic Photonic Crystals

Directory of Open Access Journals (Sweden)

Rihab Asmi

2016-01-01

Full Text Available The electric field intensity in one-dimensional (1D quasiperiodic and hybrid photonics band-gap structures is studied in the present paper. The photonic structures are ordered according to Fibonacci, Thue-Morse, Cantor, Rudin-Shapiro, Period-Doubling, Paper-Folding, and Baum-Sweet sequences. The study shows that the electric field intensity is higher for the Thue-Morse multilayer systems. After that the Thue-Morse structure will be combined with a periodic structure to form a hybrid photonic structure. It is shown that this hybrid system is the best for a strong localization of light. The proposed structures have been modeled using the Transfer Matrix Method.

The integration of electrical axle drives in hybrid vehicle and electric vehicles; Die Integration elektrischer Achsantriebe in Hybrid- und Elektrofahrzeuge

Energy Technology Data Exchange (ETDEWEB)

Schaefer, Heinz [hofer eds GmbH, Wuerzburg (Germany)

2009-07-01

In the following contribution the advantages of a high integrated electrical axle module will be explained. Furthermore different electrical machines will be introduced and the specific operational behavior will be described. After a short introduction regarding the utilization of electrical machines some proposals regarding the gear ratio will be given. At the end a novel hybrid transmission with electrical power split will be introduced. (orig.)

Comparison between the electrical properties of polyphenylacetylene and polyaminotriazole

Directory of Open Access Journals (Sweden)

M. Yahia Abed

2014-03-01

Full Text Available The electrical properties of a polymer containing aromatic rings were compared with those of polyheterocyclic compound. Each segment of the polyheterocyclic compound contains three nitrogen atoms. Both polymers were prepared at the laboratory. It was found that the specific electrical conductivity of polyphenylacetylene is higher than that of polyaminotriazole. Log ρ vs. 103/T was traced for both compounds, where ρ is the specific electrical resistivity and T is the absolute temperature. Complexes of each compound with KI were prepared. The electrical properties of these complexes were studied. The microstructure of both compounds was determined by FTIR spectroscopy.

Dynamic effective properties of heterogeneous geological formations with spherical inclusions under periodic time variations

Science.gov (United States)

Rabinovich, A.; Dagan, G.; Miloh, T.

2013-04-01

In unsteady groundwater flow (or similar processes of heat/electrical conduction), the heterogeneous medium structure is characterized by two random properties, the conductivity K and the specific storativity S. The average head field ⟨H ⟩and the associated effective properties Kef, Sef are determined for a layer with a periodic head drop between boundaries, such that H is periodic in time, and a medium made up of a matrix with a dilute concentration of spherical inclusions. In the common quasi-steady approximation, Kef is equal to the classical steady solution while Sef = SA, the arithmetic mean. We derive expressions for the frequency dependent Kef, Sef, which are generally complex, i.e., dynamic. The main result is the delineation of the ranges of the parameters: dimensionless frequency (ω) and contrasts of conductivity (κ) and storativity (s) between the matrix and the inclusions, for which dynamic effects are significant.

Combination spectra in long-period variable stars

International Nuclear Information System (INIS)

Bruce, C.E.R.

1975-01-01

The electrical discharge theory of the variation in excitation observed in the atmosphere of the long period variable stars offers an explanation for the combination spectra exhibited by many of these stars, which is shown to be in accord with several of the most outstanding changes in their spectra and magnitude. (author)

Nigeria electricity crisis: Power generation capacity expansion and environmental ramifications

International Nuclear Information System (INIS)

Aliyu, Abubakar Sadiq; Ramli, Ahmad Termizi; Saleh, Muneer Aziz

2013-01-01

Access to clean and stable electricity is essential in actualizing Nigeria's quest for joining the league of twenty most industrious nations by the year 2020 (vision 20:2020). No country can develop and sustain it development without having a minimum access to electricity for it larger percentage of its population. At present, Nigeria depends petroleum reserves and its aged hydro plant instalments for electricity generation to feed the 40% of its total population that are connected to the national grid. This paper summarizes literature on the current energy issues in Nigeria and introduces the difficulty of the issues involved. The paper also analyses the current (2010) electricity generation as well as the future expansion plans of the Government in 20 years period. The plan includes the introduction of new electrify generation technologies that have not been in used in the base year (2010). The electricity generation system of (including the future expansion plan) was simulated using the LEAP System (Long-range Energy Alternative and Planning). We also investigated the potential environmental impact of siting a nuclear power plant in one of the potential sites based on the site's specific micro-meteorology (land use) and meteorology using the US EPA (Environmental Protection Agency) models; AERMOD 12345. - Highlights: • This paper scrutinizes literature on Nigeria's energy crisis and presents the policies of the clean technology as solutions. • Only 40% of Nigeria's population is connected to the grid; and this population faces power problems 60% of the time. • Simulation of Nigeria electricity generation system was done. • Air dispersion modellingmodelling for radiological health risk from NPP was done

Exploring the relationship between agricultural electricity consumption and output: New evidence from Turkish regional data

International Nuclear Information System (INIS)

Dogan, Eyup; Sebri, Maamar; Turkekul, Berna

2016-01-01

This study investigates the relationship between agricultural electricity consumption and agricultural output for a panel of 12 regions of Turkey for the period 1995–2013. In order to reveal the possible heterogeneity between regions, empirical analyses are conducted for the whole panel data and two sub-groups within the panel data; namely, coastal regions and non-coastal regions. The results from several panel unit root tests indicate that electricity consumption and output are stationary process at their levels for overall panel and the two specific groups. By using the OLS with regional fixed effects, this study finds that coefficient estimate of electricity consumption on output is statistically significant and positive for overall regions, coastal regions and non-coastal regions. In addition, the results from the Dumitrescu-Hurlin Granger causality test show that there is unidirectional causality running from agricultural output to electricity consumption for non-coastal regions, and there is bidirectional causality between agricultural electricity consumption and output for overall panel and coastal regions. Findings and policy implications are further discussed. - Highlights: •This study uses the recently developed Dumitrescu-Hurlin Granger causality test. •There is unidirectional causality running from agricultural output to electricity consumption for non-coastal regions. •Bidirectional causality runs between the analyzed variables for coastal regions. •Electricity consumption increases agricultural output.

Table of Nuclear Electric Quadrupole Moments

International Nuclear Information System (INIS)

Stone, N.J.

2013-12-01

This Table is a compilation of experimental measurements of static electric quadrupole moments of ground states and excited states of atomic nuclei throughout the periodic table. To aid identification of the states, their excitation energy, half-life, spin and parity are given, along with a brief indication of the method and any reference standard used in the particular measurement. Experimental data from all quadrupole moment measurements actually provide a value of the product of the moment and the electric field gradient [EFG] acting at the nucleus. Knowledge of the EFG is thus necessary to extract the quadrupole moment. A single recommended value of the moment is given for each state, based, for each element, wherever possible, upon a standard reference moment for a nuclear state of that element studied in a situation in which the electric field gradient has been well calculated. For several elements one or more subsidiary reference EFG/moment references are required and their use is specified. The literature search covers the period to mid-2013. (author)

Predictability of Wave Energy and Electricity Markets

DEFF Research Database (Denmark)

Chozas, Julia Fernandez

2012-01-01

The articlw addresses an important challenge ahead the integration of the electricity generated by wave energy conversion technologies into the electric grid. Particularly, it looks into the role of wave energy within the day-ahead electricity market. For that the predictability of the theoretical...... power outputs of three wave energy technologies in the Danish North Sea are examined. The simultaneous and co-located forecast and buoy-measured wave parameters at Hanstholm, Denmark, during a non-consecutive autumn and winter 3-month period form the basis of the investigation. The objective...

Project 2nd Periodic Report - Section 2

DEFF Research Database (Denmark)

Healy, Mark; Knowles, Emma; Johnstone, Cameron

The work described in this publication has received support from the European Community - Research Infrastructure Action under the FP7 “Capacities” Specific Programme through grant agreement number 262552, MaRINET. Project Periodic Report. 2nd Period: October 2012 – March 2014 inclusive.......The work described in this publication has received support from the European Community - Research Infrastructure Action under the FP7 “Capacities” Specific Programme through grant agreement number 262552, MaRINET. Project Periodic Report. 2nd Period: October 2012 – March 2014 inclusive....

Essays in energy economics: The electricity industry

Science.gov (United States)

Martinez-Chombo, Eduardo

Electricity demand analysis using cointegration and error-correction models with time varying parameters: The Mexican case. In this essay we show how some flexibility can be allowed in modeling the parameters of the electricity demand function by employing the time varying coefficient (TVC) cointegrating model developed by Park and Hahn (1999). With the income elasticity of electricity demand modeled as a TVC, we perform tests to examine the adequacy of the proposed model against the cointegrating regression with fixed coefficients, as well as against the spuriousness of the regression with TVC. The results reject the specification of the model with fixed coefficients and favor the proposed model. We also show how some flexibility is gained in the specification of the error correction model based on the proposed TVC cointegrating model, by including more lags of the error correction term as predetermined variables. Finally, we present the results of some out-of-sample forecast comparison among competing models. Electricity demand and supply in Mexico. In this essay we present a simplified model of the Mexican electricity transmission network. We use the model to approximate the marginal cost of supplying electricity to consumers in different locations and at different times of the year. We examine how costs and system operations will be affected by proposed investments in generation and transmission capacity given a forecast of growth in regional electricity demands. Decomposing electricity prices with jumps. In this essay we propose a model that decomposes electricity prices into two independent stochastic processes: one that represents the "normal" pattern of electricity prices and the other that captures temporary shocks, or "jumps", with non-lasting effects in the market. Each contains specific mean reverting parameters to estimate. In order to identify such components we specify a state-space model with regime switching. Using Kim's (1994) filtering algorithm

Electric charger for an accumulator or battery

NARCIS (Netherlands)

Robers, E.W.J.; Molenaar, B.A.M.; Smit, W.; Bech, L.P.; Bouman, C.

2009-01-01

The invention relates to an electric charger for an accumulator or a battery or the like, which is adapted for rapid charging during an on-period and comprises for this purpose control means for starting and ending the on-period. The charger is provided with a circuit for converting a supply voltage

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2017 Ed

International Nuclear Information System (INIS)

2017-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication — currently in its thirty-seventh edition — containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the status of nuclear power in IAEA Member States as of the end of 2016 based on statistical data collected by the IAEA’s Power Reactor Information System (PRIS). It then presents estimates of energy and electricity up to 2050 derived from various international studies, including the International Energy Agency’s World Energy Outlook 2016 and the United States Energy Information Administration’s International Energy Outlook 2016. The energy and electricity data for 2016 are estimated, as the latest information available from the United Nations Department of Economic and Social Affairs is for 2014. Population data originate from World Population Prospects (2015 revision), published by the Population Division of the United Nations Department of Economic and Social Affairs. The 2016 values again are estimates. As in previous editions of RDS-1, projections of nuclear power are presented as low and high estimates encompassing the uncertainties inherent in projecting trends. The projections are based on a critical review of (i) the global and regional energy, electricity and nuclear power projections made by other international organizations, (ii) national projections supplied by individual countries for a recent OECD Nuclear Energy Agency study and (iii) the estimates of the expert group participating in the IAEA’s yearly consultancy on nuclear capacity projections. The low and high estimates reflect contrasting, but not extreme, underlying assumptions on the different driving factors that have an impact on nuclear power deployment. These factors, and the ways they might evolve, vary from country to country. The estimates presented provide a plausible range of nuclear capacity growth by region and worldwide. They are not intended to be

Electricity and gas market observatory. 4. Quarter 2008

International Nuclear Information System (INIS)

2008-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1 of July 2007, all customers can choose their gas and electricity suppliers. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status on December 31, 2008, Dynamic analysis: 4. Quarter 2008); The wholesale electricity market (Introduction, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market); B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on December 31, 2008, Dynamic analysis: 4. Quarter 2008); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France, Prices on the French wholesale market and European comparison, Concentration of the French gas market); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Electricity and gas market observatory. 3. Quarter 2007

International Nuclear Information System (INIS)

2007-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1 of July 2007, all customers can choose their gas and electricity suppliers. The present observatory is including residential customer's statistics. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status at September 30, 2007, Dynamic analysis: 3. Quarter 2007); The wholesale electricity market (Introduction, Wholesale market activity in France, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market); B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on September 30, 2007, Dynamic analysis: 3. Quarter 2007); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Electricity and gas market observatory. 1. Quarter 2008

International Nuclear Information System (INIS)

2008-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1. of July 2007, all customers can choose their gas and electricity suppliers. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status at March 31, 2007, Dynamic analysis: 1. Quarter 2008); The wholesale electricity market (Introduction, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market); B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on March 31, 2008, Dynamic analysis: 1. Quarter 2008); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France, Striking fact of the first quarter 2008); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Electricity and gas market observatory. 4. Quarter 2007

International Nuclear Information System (INIS)

2007-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1. of July 2007, all customers can choose their gas and electricity suppliers. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status at December 31, 2007, Dynamic analysis: 4. Quarter 2007); The wholesale electricity market (Introduction, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking fact of the fourth quarter 2007); B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on December 31. 2007, Dynamic analysis: 4. Quarter 2007); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France, Striking fact of the fourth quarter 2007); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

New options for purchasing electricity

International Nuclear Information System (INIS)

2003-10-01

This guide is intended for small to medium commercial customers in Alberta and explains new options for purchasing electricity. Small to medium customers include corner stores, community centres, schools, small office buildings, and light industrial businesses. In the 1990s, private power producers in Alberta built 3,000 megawatts of new generation, adding 30 per cent more supply to the power grid in the province. Prices in the deregulated electricity market have fluctuated with natural gas prices, changing weather and changing power demands. The competitive electricity market was opened on January 1, 2001 in Alberta, offering consumers purchasing choices such as green power, multi-year contracts, or electricity rates under the Regulated Rate Option (RRO). The RRO was a transition mechanism that will end by December 31, 2003 at which time, small to medium commercial customers will have the option to shop around for competitive electricity contracts that provide a fixed price of power over time, or they can opt to stay with their current supplier and receive a regulated flow-through of market prices. Under the flow-through option, risk of future deferral charges is reduced, but electricity prices will probably change between billing periods. 1 fig

3D Modeling of Electric Fields in the LUX Detector

OpenAIRE

LUX Collaboration; Akerib, D. S.; Alsum, S.; Araújo, H. M.; Bai, X.; Bailey, A. J.; Balajthy, J.; Beltrame, P.; Bernard, E. P.; Bernstein, A.; Biesiadzinski, T. P.; Boulton, E. M.; Brás, P.; Byram, D.; Cahn, S. B.

2017-01-01

This work details the development of a three-dimensional (3D) electric field model for the LUX detector. The detector took data during two periods of searching for weakly interacting massive particle (WIMP) searches. After the first period completed, a time-varying non-uniform negative charge developed in the polytetrafluoroethylene (PTFE) panels that define the radial boundary of the detector's active volume. This caused electric field variations in the detector in time, depth and azimuth, g...

3D modeling of electric fields in the LUX detector

OpenAIRE

Akerib, DS; Alsum, S; Araújo, HM; Bai, X; Bailey, AJ; Balajthy, J; Beltrame, P; Bernard, EP; Bernstein, A; Biesiadzinski, TP; Boulton, EM; Brás, P; Byram, D; Cahn, SB; Carmona-Benitez, MC

2017-01-01

© 2017 IOP Publishing Ltd and Sissa Medialab. This work details the development of a three-dimensional (3D) electric field model for the LUX detector. The detector took data to search for weakly interacting massive particles (WIMPs) during two periods. After the first period completed, a time-varying non-uniform negative charge developed in the polytetrafluoroethylene (PTFE) panels that define the radial boundary of the detector's active volume. This caused electric field variations in the de...

Decomposition of electricity demand in China's industrial sector

International Nuclear Information System (INIS)

Steenhof, Paul A.

2006-01-01

In the past five years, China's demand for electricity has accelerated far beyond what central planners had forecasted, leading to supply constraints and costly brownouts throughout the country. This paper presents analysis of the effect of changes in the industrial sector on electricity demand, an important economic sector contributing to these above patterns as it consumes nearly 70% of the electricity generated in China. Using decomposition analysis, it is found that both increased industrial activity and fuel shifts helped increase industrial sector electricity demand between 1998 and 2002, the period of focus in this study, but significant increases in energy efficiency countered this

Transition countries in the light of electricity production

International Nuclear Information System (INIS)

Kolin, I.

2000-01-01

The fall of the Berlin Wall in 1989 could be closely considered as the beginning of transition in many countries. during this period, lasting for about ten years, unavoidable fluctuations and stoppages caused degradation of electricity production and economic decline as well. This can be mathematically evaluated by means of equation for electricity production, valid before the fall of the Berlin Wall. However, electricity decrease has not been the same in all the countries. Therefore, in order to investigate and evaluate the transition process in the light of electricity production, eight transition states, including croatia, are analysed and mutually compared. (author)

Repeated regulatory failures: British electric utilities, 1919--1937

Science.gov (United States)

van der Werf, Ysbrand John

This dissertation uses previously unexamined firm-level data to look at British electric utilities during the 1919--1937 period. The persistent influence of the 1882 and 1888 Electric Lighting Acts had a significant role in perpetuating the inefficient market structure and high costs of the industry. First, I examine factors that influence costs in 1919 and compare the relative cost efficiency of municipally-owned and investor-owned utilities (munis and IOUs). Scale and load factor are found to be more important than ownership in influencing costs, although IOUs enjoy a scale advantage. Given costs, there is no difference in prices between IOUs and munis, and on average prices were 20 percent below monopoly prices. Looking at the 1919--1928 period and examining changes in the industry as measured by the firms' choices in frequency, current, and interconnections with other utilities shows evidence for a great deal of change, which occurred in statistically predictable ways. Utilities are standardizing the type of current produced, and the eventual localized standard frequencies were selected by 1907. There is little in the way of market rivalry between mum's and IOUs but large munis are less likely to build networks and sell in the wholesale market. Finally, I compare the changes that occurred during the 1919--1928 period, under the weak intervention of the Electricity Commissioners, with those of the 1928--1937 period, under the strong intervention of the Central Electricity Board. Without the CEB localized frequency standards would likely have remained in place. The CEB intervened directly in the wholesale market, but contrary to common perceptions, this strong intervention had relatively little impact on trends observed in the industry under the weak intervention of the 1919--1928 period: the CEB reduced prices and costs by no more than about 15 percent and was responsible for at most a quarter of their decline during the 1928--37 period.

Summary of Market Opportunities for Electric Vehicles and Dispatchable Load in Electrolyzers

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eichman, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ma, Ookie [U.S Department of Energy, Washington, DC (United States)

2015-05-19

Electric vehicles (EVs) and electrolyzers are potentially significant sources of new electric loads. Both are flexible in that the amount of electricity consumed can be varied in response to a variety of factors including the cost of electricity. Because both EVs and electrolyzers can control the timing of electricity purchases, they can minimize energy costs by timing the purchases of energy to periods of lowest costs.

Thermal Energy Storage for Building Load Management: Application to Electrically Heated Floor

Directory of Open Access Journals (Sweden)

Hélène Thieblemont

2016-07-01

Full Text Available In cold climates, electrical power demand for space conditioning becomes a critical issue for utility companies during certain periods of the day. Shifting a portion or all of it to off-peak periods can help reduce peak demand and reduce stress on the electrical grid. Sensible thermal energy storage (TES systems, and particularly electrically heated floors (EHF, can store thermal energy in buildings during the off-peak periods and release it during the peak periods while maintaining occupants’ thermal comfort. However, choosing the type of storage system and/or its configuration may be difficult. In this paper, the performance of an EHF for load management is studied. First, a methodology is developed to integrate EHF in TRNSYS program in order to investigate the impact of floor assembly on the EHF performance. Then, the thermal comfort (TC of the night-running EHF is studied. Finally, indicators are defined, allowing the comparison of different EHF. Results show that an EHF is able to shift 84% of building loads to the night while maintaining acceptable TC in cold climate. Moreover, this system is able to provide savings for the customer and supplier if there is a significant difference between off-peak and peak period electricity prices.

Electrical Resistivity Measurements: a Review

Science.gov (United States)

Singh, Yadunath

World-wide interest on the use of ceramic materials for aerospace and other advanced engineering applications, has led to the need for inspection techniques capable of detecting unusually electrical and thermal anomalies in these compounds. Modern ceramic materials offer many attractive physical, electrical and mechanical properties for a wide and rapidly growing range of industrial applications; moreover specific use may be made of their electrical resistance, chemical resistance, and thermal barrier properties. In this review, we report the development and various techniques for the resistivity measurement of solid kind of samples.

Evaluating penalized logistic regression models to predict Heat-Related Electric grid stress days

Energy Technology Data Exchange (ETDEWEB)

Bramer, L. M.; Rounds, J.; Burleyson, C. D.; Fortin, D.; Hathaway, J.; Rice, J.; Kraucunas, I.

2017-11-01

Understanding the conditions associated with stress on the electricity grid is important in the development of contingency plans for maintaining reliability during periods when the grid is stressed. In this paper, heat-related grid stress and the relationship with weather conditions is examined using data from the eastern United States. Penalized logistic regression models were developed and applied to predict stress on the electric grid using weather data. The inclusion of other weather variables, such as precipitation, in addition to temperature improved model performance. Several candidate models and datasets were examined. A penalized logistic regression model fit at the operation-zone level was found to provide predictive value and interpretability. Additionally, the importance of different weather variables observed at different time scales were examined. Maximum temperature and precipitation were identified as important across all zones while the importance of other weather variables was zone specific. The methods presented in this work are extensible to other regions and can be used to aid in planning and development of the electrical grid.

Electricity and gas market observatory. 2. quarter 2007

International Nuclear Information System (INIS)

2007-01-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Non-residential customer segments and their respective weights, Status at July 1, 2007, Dynamic analysis: 2. Quarter 2007; The wholesale electricity market: Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the second quarter 2007; The gas market; The retail gas market: The non-residential customer segments and their respective weights, Status at July 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary

Electricity and gas market observatory. 2. quarter 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web-site (www.cre.fr). It presents: The electricity market; The retail electricity market: Non-residential customer segments and their respective weights, Status at July 1, 2007, Dynamic analysis: 2. Quarter 2007; The wholesale electricity market: Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the second quarter 2007; The gas market; The retail gas market: The non-residential customer segments and their respective weights, Status at July 1. 2007; The wholesale gas market: Gas pricing and gas markets in Europe,The wholesale market in France. Some glossaries are attached to the document: Electricity and gas market observatories combined glossary; Specific electricity market observatory glossary; Specific gas market observatory glossary.

Determination of Specific Losses in the Limbs of an Epstein Frame Using a Three Epstein Frame Methodology Applied to Grain Oriented Electrical Steels

Directory of Open Access Journals (Sweden)

Guillaume Parent

2016-06-01

Full Text Available An experimental method to characterize the magnetic properties of Grain Oriented Electrical Steel in the rolling direction is proposed in this paper. It relies on the use of three 25 cm Epstein frames combined to generate three test-frames of different lengths. This enables the identification of the effective specific losses of the electrical steel when magnetization is applied along the rolling direction. As a consequence, it evidences the deviation of the loss figures obtained using the standardised Epstein test. The difference in losses is explained by the fact that the described method gives “only” the losses attached to the straight parts. The concept of the magnetic path length as defined by the standard is discussed.

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2013 Ed

International Nuclear Information System (INIS)

2013-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication - currently in its thirty-third edition - containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the situation of nuclear power in IAEA Member States as of the end of 2012. The data on nuclear power presented are based on actual statistical data collected by the IAEA's power Reactor Information System (PRIS). However, energy and electricity data for 2012 are estimated, as the latest information available from the united Nations Department of Economic and Social Affairs is for 2010 only. Population data originate from the world population prospects (2010 revision), published by the population Division of the united Nations Department of Economic and Social Affairs. The 2012 values again are estimates. As in previous editions, projections of future energy and electricity demand and the role of nuclear power are presented as low and high estimates encompassing the inherent uncertainties involved in projecting trends. The RDS-1 estimates should be viewed as very general growth trends whose validity must be constantly subjected to critical review. Many international, national and private organizations routinely engage in energy demand and supply projections, including nuclear power. These projections are based on a multitude of different assumptions and aggregating procedures, which make a straightforward comparison and synthesis very difficult. The basic differences refer to such fundamental input assumptions as: - Economic growth; - Correlation of economic growth and energy use; - Technology performance and costs; - Energy resource availability and future fuel prices; - Energy policy and physical, environmental and economic constraints

Apollo Lunar Module Electrical Power System Overview

Science.gov (United States)

Interbartolo, Michael

2009-01-01

Objectives include: a) Describe LM Electrical System original specifications; b) Describe the decision to change from fuel cells to batteries and other changes; c) Describe the Electrical system; and d) Describe the Apollo 13 failure from the LM perspective.

Electricity demand for South Korean residential sector

International Nuclear Information System (INIS)

Sa'ad, Suleiman

2009-01-01

This study estimates the electricity demand function for the residential sector of South Korea with the aim of examining the effects of improved energy efficiency, structural factors and household lifestyles on electricity consumption. In the study, time series data for the period from 1973 to 2007 is used in a structural time series model to estimate the long-term price and income elasticities and annual growth of underlying energy demand trend (UEDT) at the end of the estimation period. The result shows a long-term income elasticity of 1.33 and a long-term price elasticity of -0.27% with -0.93% as the percentage growth of UEDT at the end of the estimation period. This result suggests that, in order to encourage energy efficiency in the residential sector, the government should complement the market based pricing policies with non-market policies such as minimum energy efficiency standards and public enlightenment.

Digital control of electric drives

CERN Document Server

Koziol, R; Szklarski, L

1992-01-01

The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach

Econometric modeling of electricity consumption in post-war Lebanon

International Nuclear Information System (INIS)

Nasr, G.E.; Badr, E.A.; Dibeh, G.

2000-01-01

This paper applies econometric models to investigate determinants of electrical energy consumption in post-war Lebanon. The impact of the Gross Domestic Product (GDP), proxied by total imports (TI), and degree days (DD) on electricity consumption is investigated over different time spans covering the period from 1993 to 1997. The time spans are chosen according to the rationing level of electricity supply. For the 1993-1994 time span, TI is found to be a significant determinant of energy consumption, whereas, DD has a negative correlation. This inconsistency might be attributed to an extensive rationing policy followed during this period. For the 1995-1997 time span which includes reduced rationing period (1995), all electrical energy consumption determinants are found to be significant at the 5% significance level. Analysis results for the rationing free 1996-1997 time span also show the significance of TI and DD at the 5% level. Furthermore, cointegration analysis for the 1995-1997 and 1996-1997 subsets reveals the existence of a long-run relationship between all variables. In addition, error correction models for both subsets are developed to predict short-run dynamics. Finally, statistical performance measures such as mean square error, mean average deviation and mean average percentage error are presented for all models

Electricity rationing and public response

International Nuclear Information System (INIS)

Souza, Leonardo Rocha; Soares, Lacir Jorge

2007-01-01

This paper studies the electricity load demand behavior during the 2001 rationing period, which was implemented because of the Brazilian energy crisis. The hourly data refers to a utility situated in the southeast of the country. We use the model proposed by Soares and Souza [Soares, L.J. and Souza, L.R. (2006), 'Forecasting electricity demand using generalized long memory', International Journal of Forecasting, 22, 17-28.], making use of generalized long memory to model the seasonal behavior of the load. The rationing period is shown to have imposed a structural break in the series, decreasing the load at about 20%. Even so, the forecast accuracy is decreased only marginally, and the forecasts rapidly readapt to the new situation. The structural break, as well as the forecast errors from this model, also permits verifying the public response to pieces of information released regarding the crisis. (Author)

Financing electricity expansion

International Nuclear Information System (INIS)

Hyman, L.S.

1994-01-01

Expansion of electricity supply is associated with economic development. The installation and enlargement of power systems in developing countries entails a huge financial burden, however. Energy consumers in such countries must pay not only for supplies but for the cost of raising the capital for expansion on the international markets. Estimates are presented for the capital expenditure for electricity supply over the period 1990 to 2020 for the major world regions, using approximations for the cost of plant and capital and for the returns earned. These data lead to the conclusion that the five regions with the lowest per capita incomes are those which will need the major part of the capital expenditure and the highest percentage of external finance. (6 tables) (UK)

Is “smart charging” policy for electric vehicles worthwhile?

International Nuclear Information System (INIS)

Lyon, Thomas P.; Michelin, Mark; Jongejan, Arie; Leahy, Thomas

2012-01-01

Plug-in electric vehicles (PEVs) offer the potential for both reducing reliance on oil and reducing greenhouse gas emissions. However, they may also increase the demand for electricity during peak periods, thereby requiring the construction of new generating units and increasing total costs to electricity consumers. We evaluate the economic costs and benefits of policies that shift charging demand from daytime to off-peak nighttime hours, using data for two different independent system operators and considering a number of sensitivity analyses. We find that the total savings from demand-shifting run into the billions of dollars, though as a percentage of total electricity costs they are quite small. The value of smart charging policy varies significantly across electric grids. Time-of-use pricing is worthwhile under all of the cases we study, but the economic benefits of optimal charging of electric vehicles do not appear to justify investing in the smart grid infrastructure required to implement real-time pricing. - Highlights: ► Evaluates shifting charging time from peak to off-peak periods. ► Studies both MISO and PJM. ► Results depend on whether marginal fuel is coal or gas. ► Compares time-of-use pricing to real-time pricing.

Contrasting electricity demand with wind power supply: case study in Hungary

International Nuclear Information System (INIS)

Kiss, P.; Janosi, I. M.; Varga, L.

2009-01-01

We compare the demand of a large electricity consumer with supply given by wind farms installed at two distant geographic locations. Obviously such situation is rather unrealistic, however our main goal is a quantitative characterization of the intermittency of wind electricity. The consumption pattern consists of marked daily and weekly cycles interrupted by periods of holidays. In contrast, wind electricity production has neither short-time nor seasonal periodicities. We show that wind power integration over a restricted area cannot provide a stable base load supply, independently of the excess capacity. Further essential result is that the statistics are almost identical for a weekly periodic pattern of consumption and a constant load of the same average value. The length of both adequate supply and shortfall intervals exhibits a scale-free (power-law) frequency distribution, possible consequences are shortly discussed. (author)

Contrasting Electricity Demand with Wind Power Supply: Case Study in Hungary

Directory of Open Access Journals (Sweden)

Imre M. Jánosi

2009-09-01

Full Text Available We compare the demand of a large electricity consumer with supply given by wind farms installed at two distant geographic locations. Obviously such situation is rather unrealistic, however our main goal is a quantitative characterization of the intermittency of wind electricity. The consumption pattern consists of marked daily and weekly cycles interrupted by periods of holidays. In contrast, wind electricity production has neither short-time nor seasonal periodicities. We show that wind power integration over a restricted area cannot provide a stable baseload supply, independently of the excess capacity. Further essential result is that the statistics are almost identical for a weekly periodic pattern of consumption and a constant load of the same average value. The length of both adequate supply and shortfall intervals exhibits a scale-free (power-law frequency distribution, possible consequences are shortly discussed.

Electricity and gas market observatory. 1. Quarter 2007

International Nuclear Information System (INIS)

2007-01-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). It completes the information already published by CRE: - practical information for eligible customers: consumer guide, list of suppliers, - communications regarding markets running; CRE's annual activity report. Content: A - The electricity market: The retail electricity market (Introduction, Eligible customer segments and their respective weights, Status at April 1, 2007, Dynamic analysis: 1. Quarter 2007); The wholesale electricity market (Introduction, Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 1. 2007 quarter); B - The gas market: The retail gas market (Introduction, The eligible customer segments and their respective weights, Status at April 1, 2007); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Electricity and gas market observatory. 4. Quarter 2006

International Nuclear Information System (INIS)

2006-01-01

Since July 1, 2004, all electricity and gas consumers can be eligible according to their consumption site, as long as all or part of the electricity or gas consumed is designed for non-residential use. The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). It completes the information already published by CRE: - practical information for eligible customers: consumer guide, list of suppliers, - communications regarding markets running; CRE's annual activity report. Content: A - The electricity market: The retail electricity market (Introduction, Eligible customer segments and their respective weights, Status at January 1, 2007, Dynamic analysis: 4. Quarter 2006); The wholesale electricity market (Introduction, Traded volumes on the French wholesale electricity market and comparison with European markets, Prices on the French wholesale electricity market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking facts of the 4. 2006 quarter); B - The gas market: The retail gas market (Introduction, The eligible customer segments and their respective weights, Status at January 1, 2007); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

Future demand for electricity in Nigeria

International Nuclear Information System (INIS)

Ibitoye, F.I.; Adenikinju, A.

2007-01-01

Availability and reliability of electricity supplies have always been vexed issue in Nigeria. With an estimated population of 130 million people in AD 2005, Nigeria is the most populous country in Africa and belongs to the group of countries with the lowest electricity consumption per capita in the continent. Nigeria is also ranked among the poorest countries in the world. This paper examines the likely trend in the demand for electricity over the next 25 years under the assumptions that (i) there is a rapid economic development such that Nigeria transforms from low- to middle-income economy during this period, (ii) Nigeria meets the millennium development goals (MDG) in AD 2015, and (iii) the country achieves the status of an industrializing nation. For these to happen, this paper projects that electric-power generation will have to rise from the current capacity of 6500 MW to over 160 GW in AD 2030. This level of supply will be significant enough to increase the per capita electricity consumption to about 5000 kWh per capita by the year 2030. Even then, this just compares with the AD 2003 per capital consumption of some industrializing countries. Analysis of the level of investment required to meet the projected power demand indicates that annual investment cost will rise from US3.8 billion in AD 2006 to a peak of US21 billion in AD 2028. The total investment stream over the 25 year period comes to US262 billion or roughly US10 billion per annum. (author)

On the legal nature of electricity supply contracts concluded by electricity companies and power stations generating electricity from renewable energy sources

International Nuclear Information System (INIS)

Herrmann, B.J.

1998-01-01

Section 2 of the German Act for enhanced use of electricity from renewable energy sources (StEG) defines the obligation to contract but not the contractual obligations, i.e. the conditions of performance of the contract (supply and purchase of electricity and the legal obligations of contractors). The analysis here shows that characterising this mandatory contract required by the act as an agreement of purchase and sale more appropriately describes the legal nature of the contract and the intent of the legislator than other contracts for supply and purchase of electricity, as for instance those concluded by electric utilities and their customers. One specific aspect elaborated by the author is that the StEG does not constitute an obligation to supply on the part of the renewable energy generating power station, so that the power station operator is not obliged to ensure availability of the electricity at any time or in terms of supplies that can be called off by the purchasing utility, whereas the electric utility is obliged by section 2 of the StEG to purchase the contractual amounts from the generating station. (orig./CB) [de

Status report on potential future nuclear energy cycles in the period 1982-2020

International Nuclear Information System (INIS)

1982-11-01

The demand for electrical power and the availability of fuel to supply it is the driving force behind any change in the electrical supply technology. A survey of a number of recent world wide electrical power growth projections indicates a growth rate of between 2 percent and 4 percent within the period of 1980 to 2020. In some countries, such as France and Japan, without large domestic supplies of conventional fuels, there is a significant effort to extend supplies of uranium using advanced fuel cycles and breeder reactors. In North America, and in particular the United States, there would appear to be adequate supplies of conventional fuel for the projected growth for the period of the study. Development of advanced fuel cycles in this case will be driven by economic considerations rather than strategic ones. A review of the current status of fusion test facilities is included in the report, but the consensus of opinion of the literature surveyed would indicate that no commercial scale generating plant will be operational within the study period

From franchise to state commission: Regulation of the electric utility industry, 1907 to 1932

Science.gov (United States)

Reutter, Keith Alan

1997-09-01

Empirical research into the effects of regulation on industry has been around since the early 1960s. Over the last thirty plus years a number of interesting results have been brought to the fore. For instance, it has been found that regulation of the trucking industry limits entry and increases prices. A similar result has been pointed to in other industries such as commercial airlines and banking. The effect of the state commission form of regulation on the electric utility industry has been less conclusive. State commissions became dominant during the period 1910-1930, replacing local franchising as a method of regulating the electric utility industry. Two competing theories suggest why this transformation took place, the "capture" and "public interest" theories of regulation. The capture theory of regulation suggests that the electric utility industry demanded state regulation as a way to earn above normal profits and reduce competition. The public interest theory suggests the purpose of regulation by state commissions was to benefit the general public by forcing the industry to be competitive. Few studies have tried to determine which theory more aptly describes the actual events that took place. The empirical model developed in Chapter V, is an extension of the current literature. A set of simultaneous equations describing the natural gas and electricity markets is estimated using cross-sectional time-series data from 1907 to 1932. The effect of regulation on the electric utility industry is modeled with a dummy variable taking on a value of one to designate that a state commission had been established. The results suggest the capture theory of regulation best describes the period under study. The empirical estimates indicate that state commissions (1) reduced the rate at which the real price of electricity was falling, (2) had a negative impact on firms entering the industry, (3) had a positive influence on the cost of producing a kwh of electricity, and (4

A hybrid dielectric and iris loaded periodic accelerating structure

International Nuclear Information System (INIS)

Zou, P.; Xiao, L.; Sun, X.; Gai, W.

2001-01-01

One disadvantage of conventional iris-loaded accelerating structures is the high ratio of the peak surface electric field to the peak axial electric field useful for accelerating a beam. Typically this ratio E s /E a ≥ 2. The high surface electric field relative to the accelerating gradient may prove to be a limitation for realizing technologies for very high gradient accelerators. In this paper, we present a scheme that uses a hybrid dielectric and iris loaded periodic structure to reduce E s /E a to near unity, while the shunt impedance per unit length r and the quality factor Q compare favorably with conventional metallic structures. The analysis based on MAFIA simulations of such structures shows that we can lower the peak surface electric field close to the accelerating gradient while maintaining high acceleration efficiency as measured by r/Q. Numerical examples of X-band hybrid accelerating structures are given

Decomposition analysis of the variations in household electricity consumption in Brazil; Analise de decomposicao das variacoes no consumo de energia eletrica no setor residencial brasileiro

Energy Technology Data Exchange (ETDEWEB)

Achao, Carla da Costa Lopes

2009-09-15

Introduced at the end of the 1970s to study the impacts of structural changes on electricity consumption by industry, index decomposition analysis techniques have been extended to various other areas to help in the formulation of energy policies, notably in developed countries. However, few authors have applied these techniques to study the evolution of energy consumption in developing countries. In Brazil, the few available studies have focused only on the industrial sector. In this thesis, we apply the decomposition technique called the logarithmic mean Divisia index (LMDI) to electricity consumption of the Brazilian residential sector, to explain its evolution in terms of the activity, structure and intensity affects, over the period from 1980 to 2007. The results obtained in a preliminary analysis point out, in a general way, that the observed variables in electricity consumption in the Brazilian residential sector are, mainly, the product of the increase in the number of consumers and the changes in the specific consumption of electricity in households. In a further analysis, carried out when the structure is given through consumers participation in consumption categories (Low Income and Conventional) taken from an overall point of view, although the intensity and activity effects may be considered the main explaining factors in consumption variation, the structure effect stands out in the period immediately after the 2001 rationing, as a reflect of the changes in the inclusion criteria in the Low Income category, specifically in the Northeast. (author)

Comparing equivalent thermal, high pressure and pulsed electric field processes for mild pasteurization of orange juice: Part II: Impact on specific chemical and biochemical quality parameters

NARCIS (Netherlands)

Vervoort, L.; Plancken, van der I.; Grauwet, T.; Timmermans, R.A.H.; Mastwijk, H.C.; Matser, A.M.; Hendrickx, M.E.; Loey, van A.

2011-01-01

The impact of thermal, high pressure (HP) and pulsed electric field (PEF) processing for mild pasteurization of orange juice was compared on a fair basis, using processing conditions leading to an equivalent degree of microbial inactivation. Examining the effect on specific chemical and biochemical

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2016 Ed

International Nuclear Information System (INIS)

2016-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication — currently in its thirty-sixth edition — containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the situation of nuclear power in IAEA Member States as of the end of 2015. The data on nuclear power presented in Tables 1 and 2 are based on actual statistical data collected by the IAEA’s Power Reactor Information System (PRIS). However, energy and electricity data for 2015 are estimated, as the latest information available from the United Nations Department of Economic and Social Affairs is for 2013. Population data originate from the World Population Prospects (2012 revision), published by the Population Division of the United Nations Department of Economic and Social Affairs. The 2015 values again are estimates. As in previous editions, projections of future energy and electricity demand and the role of nuclear power are presented as low and high estimates encompassing the inherent uncertainties involved in projecting trends. The RDS-1 estimates should be viewed as very general growth trends whose validity must be constantly subjected to critical review. Many international, national and private organizations routinely engage in energy demand and supply projections, including projections for nuclear power. These projections are based on a multitude of different assumptions and aggregating procedures, making a straightforward comparison and synthesis very difficult. The basic differences relate to such fundamental input assumptions as: • Economic growth; • Correlation of economic growth and energy use; • Technology performance and costs; • Energy resource availability and future fuel prices; •• Energy policy and physical, environmental and economic constraints

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2014 Ed

International Nuclear Information System (INIS)

2014-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication — currently in its thirty-fourth edition — containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the situation of nuclear power in IAEA Member States as of the end of 2013. The data on nuclear power presented in Tables 1 and 2 are based on actual statistical data collected by the IAEA’s Power Reactor Information System (PRIS). However, energy and electricity data for 2013 are estimated, as the latest information available from the United Nations Department of Economic and Social Affairs is for 2011. Population data originate from the World Population Prospects (2010 revision), published by the Population Division of the United Nations Department of Economic and Social Affairs. The 2013 values again are estimates. As in previous editions, projections of future energy and electricity demand and the role of nuclear power are presented as low and high estimates encompassing the inherent uncertainties involved in projecting trends. The RDS-1 estimates should be viewed as very general growth trends whose validity must be constantly subjected to critical review. Many international, national and private organizations routinely engage in energy demand and supply projections, including nuclear power. These projections are based on a multitude of different assumptions and aggregating procedures, making a straightforward comparison and synthesis very difficult. The basic differences relate to such fundamental input assumptions as: • Economic growth; • Correlation of economic growth and energy use; • Technology performance and costs; • Energy resource availability and future fuel prices; • Energy policy and physical, environmental and economic constraints

Energy, electricity and nuclear power estimates for the period up to 2030. July 2005 ed

International Nuclear Information System (INIS)

2005-01-01

Reference Data Series No. 1 is an annual publication - currently in its twenty-fifth edition - containing estimates of energy, electricity and nuclear power trends up to the year 2030. Nuclear data presented in Table 1 are based on actual statistical data collected by the IAEA's Power Reactor Information System (PRIS). Energy and electricity data for 2004, however, are estimated, since the latest available information from the Department of Economic and Social Affairs of the United Nations is for 2002. Population data originate from the 'World Population Prospects' (2003 Revision), published by the Population Division of the UN Department of Economic and Social Affairs, and the 2004 values are estimates. The future growth of energy, electricity and nuclear power up to the year 2030 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The energy forecasts carried out in increasing numbers over the last years by international, national and private organizations are based on a multiplicity of different assumptions and different aggregating procedures, which make their comparison and synthesis very difficult. The basic differences refer to such fundamental input data as: - World and regional scenarios of economic development; - Correlation of economic growth and energy consumption; - Assumptions on physical, economic and political constraints applying to energy production and consumption; - Future prices of different energy sources. The projections presented in this booklet are based on a compromise among: - National projections supplied by each country for a recent OECD/NEA study; - Indicators of development published by the World Bank in its World Development Indicators; - Estimates of energy, electricity and nuclear power growth continuously carried out by the IAEA in the wake of recent

Electricity and gas market observatory 1. Quarter 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). Since the 1. of July 2007, all customers can choose their gas and electricity suppliers. Content: A - The electricity market: The retail electricity market (Introduction, Customer segments and their respective weight, Status on March 31, 2009, Dynamic analysis: 1. Quarter 2009), The wholesale electricity market (Introduction, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market). B - The gas market: The retail gas market (Introduction, Customer segments and their respective weight, Status on March 31. 2009, Dynamic analysis: 1. Quarter 2009), The wholesale gas market (Main steps in the French Wholesale gas market, Gas pricing and gas markets in Europe, The wholesale market in France, Prices on the French wholesale market and European comparison, Concentration of the French gas market) C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

In Vitro Assessment of Electric Currents Increasing the Effectiveness of Vancomycin Against Staphylococcus epidermidis Biofilms.

Science.gov (United States)

Haddad, Peter A; Mah, Thien-Fah; Mussivand, Tofy

2016-08-01

Biofilms are communities of bacteria that can cause infections which are resistant to the immune system and antimicrobial treatments, posing a significant threat for patients with implantable and indwelling medical devices. The purpose of our research was to determine if utilizing specific parameters for electric currents in conjunction with antibiotics could effectively treat a highly resistant biofilm. Our study evaluated the impact of 16 μg/mL of vancomycin with or without 22 or 333 μA of direct electric current (DC) generated by stainless steel electrodes against 24-, 48-, and 72-h-old Staphylococcus epidermidis biofilms formed on titanium coupons. An increase in effectiveness of vancomycin was observed with the combination of 333 μA of electric current against 48-h-old biofilms (P value = 0.01) as well as in combination with 22 μA of electric current against 72-h-old biofilms (P value = 0.04); 333 μA of electric current showed the most significant impact on the effectiveness of vancomycin against S. epidermidis biofilms demonstrating a bioelectric effect previously not observed against this strain of bacteria. © 2015 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

[A physiological investigation of chronic electrical stimulation with scala tympani electrodes in kittens].

Science.gov (United States)

Ni, D

1992-12-01

A physiological investigation of cochlear electrical stimulation was undertaken in six two-month-old kittens. The scala tympani electrodes were implanted and electrically stimulated using biphasic balanced electrical pulses for periods of 1000-1500h in four ears. Four ears received implants for same period but without electrical stimulation. The other two ears served as normal control. The results indicated: 1) Chronic electrical stimulation of the cochlea within electrochemically safe limits did not influence the hearing of kittens and the normal delivery of impulses evoked by acoustic and electrical signals on the auditory brainstem pathway. 2) The wave shapes of EABRs were similar to those of ABRs. The amplitudes of EABRs showed a significant increase following chronic electrical stimulation, resulting in a leftward shift in the input/output function. The absolute latencies and interwave latencies of waves II-III, III-IV and II-IV were significantly shorter than those of ABRs. These results imply that there was no adverse effect of chronic electrical stimulation on the maturing auditory systems of kittens using these electrical parameters and the mechanism of electrical hearing should be further studied.

Forecasting residential electricity demand in provincial China.

Science.gov (United States)

Liao, Hua; Liu, Yanan; Gao, Yixuan; Hao, Yu; Ma, Xiao-Wei; Wang, Kan

2017-03-01

In China, more than 80% electricity comes from coal which dominates the CO2 emissions. Residential electricity demand forecasting plays a significant role in electricity infrastructure planning and energy policy designing, but it is challenging to make an accurate forecast for developing countries. This paper forecasts the provincial residential electricity consumption of China in the 13th Five-Year-Plan (2016-2020) period using panel data. To overcome the limitations of widely used predication models with unreliably prior knowledge on function forms, a robust piecewise linear model in reduced form is utilized to capture the non-deterministic relationship between income and residential electricity consumption. The forecast results suggest that the growth rates of developed provinces will slow down, while the less developed will be still in fast growing. The national residential electricity demand will increase at 6.6% annually during 2016-2020, and populous provinces such as Guangdong will be the main contributors to the increments.

Energy, Electricity and Nuclear Power Estimates for the Period up to 2050. 2010 Ed

International Nuclear Information System (INIS)

2010-01-01

Reference Data Series No. 1 (RDS-1) is an annual publication - currently in its thirtieth edition - containing estimates of energy, electricity and nuclear power trends up to the year 2050. RDS-1 starts with a summary of the situation of nuclear power in IAEA Member States as of the end of 2009. The data on nuclear power are based on actual statistical data collected by the IAEA's Power Reactor Information System (PRIS). Energy and electricity data for 2009, however, are estimated, since the latest available information from the United Nations Department of Economic and Social Affairs is for 2007. Population data originate from the World Population Prospects (2008 revision), published by the Population Division of the United Nations Department of Economic and Social Affairs, and the 2009 values again are estimates. As in the past, projections of future needs of energy, electricity and nuclear power are presented as low and high estimates encompassing the inherent uncertainties involved in projecting trends. The RDS-1 estimates should be viewed as very general growth trends whose validity must be constantly subjected to critical review. Beginning with the 30th edition of this publication, however, the end-point of the estimates is extended up to the year 2050 (instead of 2030). Looking beyond 2030 is prompted by the interest expressed by numerous Member States currently without nuclear power in adding nuclear energy to their future national energy supply mixes. Given the lead times in planning and implementing nuclear power programmes, a fair share of these are likely to result in actual plant commissioning and grid connection after 2030. Many international, national and private organizations routinely engage in energy demand and supply projections, including nuclear power. These projections are based on a multitude of different assumptions and aggregating procedures, which make a straightforward comparison and synthesis very difficult. The basic differences refer

Characteristics of the prices of operating reserves and regulation services in competitive electricity markets

International Nuclear Information System (INIS)

Wang Peng; Zareipour, Hamidreza; Rosehart, William D.

2011-01-01

In this paper, characteristics of the prices of reserves and regulation services in the Ontario, New York and ERCOT electricity markets are studied. More specifically, price variability, price jumps, long-range correlation, and non-linearity of the prices are analyzed using the available measures in the literature. For the Ontario electricity market, the prices of 10-min spinning, 10-min non-spinning, and 30-min operating reserves for the period May 1, 2002 to December 31, 2007 are analyzed. For the New York market, prices of the same reserves plus regulation service are studied for the period February 5, 2005 to December 31, 2008. For the ERCOT market, we analyze the prices of responsive reserve, regulation up and regulation down services, for the period January 1, 2005 to December 31, 2009. The studied characteristics of operating reserve and regulation prices are also compared with those of energy prices. The findings of this paper show that the studied reserve and regulation prices feature extreme volatility, more frequent jumps and spikes, different peak price occurrence time, and lower predictability, compared to the energy prices. - Research highlights: → We examine various statistical characteristics of reserve and regulation prices. → We compare characteristics of reserve and regulation and energy prices. → Reserve and regulation prices feature different patterns from energy prices. → Reserve and regulation prices are more dispersive and volatile than energy price.

Germany's nuclear power plant closures and the integration of electricity markets in Europe

International Nuclear Information System (INIS)

Menezes, Lilian M. de; Houllier, Melanie A.

2015-01-01

This paper examines the potential implications of national policies that lead to a sudden increase of wind power in the electricity mix for interconnected European electricity markets. More specifically, it examines market integration before and after the closures of eight nuclear power plants that occurred within a period of a few months in Germany during 2011. The short- and- long run interrelationships of daily electricity spot prices, from November 2009 to October 2012, in: APX-ENDEX, BELPEX, EPEX-DE, EPEX-FR, NORDPOOL, OMEL and SWISSIX; and wind power in the German system are analysed. Two MGARCH (Multivariate Generalized Autoregressive Conditional Heteroscedasticity) models with dynamic correlations are used to assess spot market behaviour in the short run, and a fractional cointegration analysis is conducted to investigate changes in the long-run behaviour of electricity spot prices. Results show: positive time-varying correlations between spot prices in markets with substantial shared interconnector capacity; a negative association between wind power penetration in Germany and electricity spot prices in the German and neighbouring markets; and, for most markets, a decreasing speed in mean reversion. -- Highlights: •Associations between spot prices and wind power are time-varying. •Greater spot price and volatility associations across markets are observed. •In the long run, the German market is less integrated with neighbouring markets. •Policies on a local electricity mix can affect spot prices in connected markets

Biological conversion of hydrogen to electricity for energy storage

International Nuclear Information System (INIS)

Karamanev, Dimitre; Pupkevich, Victor; Penev, Kalin; Glibin, Vassili; Gohil, Jay; Vajihinejad, Vahid

2017-01-01

Energy storage is currently one of the most significant problems associated with mass-scale usage of renewable (i.e. wind and solar) power sources. The use of hydrogen as an energy storage medium is very promising, but is hampered by the lack of commercially available hydrogen-to-electricity (H2e) converters. Here we are presenting the first commercially viable, biologically based technology for H2e conversion named the BioGenerator. It is a microbial fuel cell based on electron consumption resulting from the respiration of chemolithoautotrophic microorganisms. The results obtained during the scale-up study of the BioGenerator showed a maximum specific current of 1.35 A/cm 2 , maximum power density of 1800 W/m 2 and stable electricity generation over a period spanning longer than four years. The largest unit studied so far has a volume of 600 L and a power output of 0.3 kW. - Highlights: • A commercially viable biological convertor of H 2 to electricity (BioGenerator) is proposed. • It has a short-term commercial potential and its economic analysis is quite promising. • The BioGenerator is the first commercially viable bio-technology for energy storage. • It is a power generation technology of which has a negative CO 2 emission.

Energy, electricity and nuclear power estimates for the period up to 2030. July 2003 ed

International Nuclear Information System (INIS)

2003-01-01

Reference Data Series No. 1 is an annual publication - currently in its twenty-second edition - containing estimates of energy, electricity and nuclear power trends up to the year 2020. Nuclear data presented in Table 1 are based on actual statistical data collected by the IAEA's Power Reactor Information System (PRIS). Energy and electricity data for 2001, however, are estimated, since the latest available information from the Department of Economic and Social Affairs of the United Nations is for 1999. Population data originate from the 'World Population Prospects' (2001 Revision), published by the Population Division of the UN Department of Economic and Social Affairs, and the 2001 values are estimates. The future growth of energy, electricity and nuclear power up to the year 2020 is presented as low and high estimates in order to encompass the uncertainties associated with the future. These estimates should be viewed as very general growth trends whose validity must constantly be subjected to critical review. The nuclear generating capacity estimates presented in Table are derived from a country by country bottom-up approach. They are established by a group of experts participating each year in the IAEA's consultancy on Nuclear Capacity Projections and based upon a review of nuclear power projects and programmes in Member States. The total energy consumption has been calculated by summing the primary energy consumption and the net secondary energy import

Fiber optic index sensor enhanced by gold nanoparticle assembly on long period grating

Czech Academy of Sciences Publication Activity Database

Tian, F.; Li, X.; Kaňka, Jiří; Du, H.

2017-01-01

Roč. 132, March (2017), s. 445-449 ISSN 0030-4026 R&D Projects: GA MŠk(CZ) LH11038 Institutional support: RVO:67985882 Keywords : Layer-by-layer * Long period grating * Au nanoparticle Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering OBOR OECD: Electrical and electronic engineering Impact factor: 0.835, year: 2016

Electricity sector reform in Greece

International Nuclear Information System (INIS)

Iliadou, Ekaterini N.

2009-01-01

This paper provides an outlook of the electricity market reform in Greece which started in 2001 and is still developing slowly. This is related to the persisting dominance of the incumbent company and the specificities of the electricity sector of Greece which is heavily dependent on indigenous lignite firing generation, while being located in the periphery of the EU internal electricity and gas markets. Competition through enhancing electricity trade in the region is limited to date, as the establishment of an internal market in South East Europe also progresses slowly. Development of competition through gas-firing generation by new entrants has been the priority adopted by State and Regulator's policies. However, the gas supply market in Greece and in the region still lags behind. (author)

Electricity demand for South Korean residential sector

Energy Technology Data Exchange (ETDEWEB)

Sa' ad, Suleiman [Surrey Energy Economics Centre (SEEC), Department of Economics, University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom)

2009-12-15

This study estimates the electricity demand function for the residential sector of South Korea with the aim of examining the effects of improved energy efficiency, structural factors and household lifestyles on electricity consumption. In the study, time series data for the period from 1973 to 2007 is used in a structural time series model to estimate the long-term price and income elasticities and annual growth of underlying energy demand trend (UEDT) at the end of the estimation period. The result shows a long-term income elasticity of 1.33 and a long-term price elasticity of -0.27% with -0.93% as the percentage growth of UEDT at the end of the estimation period. This result suggests that, in order to encourage energy efficiency in the residential sector, the government should complement the market based pricing policies with non-market policies such as minimum energy efficiency standards and public enlightenment. (author)

Evaluating the limits of solar photovoltaics (PV) in traditional electric power systems

International Nuclear Information System (INIS)

Denholm, Paul; Margolis, Robert M.

2007-01-01

In this work, we examine some of the limits to large-scale deployment of solar photovoltaics (PV) in traditional electric power systems. Specifically, we evaluate the ability of PV to provide a large fraction (up to 50%) of a utility system's energy by comparing hourly output of a simulated large PV system to the amount of electricity actually usable. The simulations use hourly recorded solar insolation and load data for Texas in the year 2000 and consider the constraints of traditional electricity generation plants to reduce output and accommodate intermittent PV generation. We find that under high penetration levels and existing grid-operation procedures and rules, the system will have excess PV generation during certain periods of the year. Several metrics are developed to examine this excess PV generation and resulting costs as a function of PV penetration at different levels of system flexibility. The limited flexibility of base load generators produces increasingly large amounts of unusable PV generation when PV provides perhaps 10-20% of a system's energy. Measures to increase PV penetration beyond this range will be discussed and quantified in a follow-up analysis

Dielectric materials for electrical engineering

CERN Document Server

Martinez-Vega, Juan

2013-01-01

Part 1 is particularly concerned with physical properties, electrical ageing and modeling with topics such as the physics of charged dielectric materials, conduction mechanisms, dielectric relaxation, space charge, electric ageing and life end models and dielectric experimental characterization. Part 2 concerns some applications specific to dielectric materials: insulating oils for transformers, electrorheological fluids, electrolytic capacitors, ionic membranes, photovoltaic conversion, dielectric thermal control coatings for geostationary satellites, plastics recycling and piezoelectric poly

Employment trends in the U.S. Electricity Sector, 2008–2012

International Nuclear Information System (INIS)

Haerer, Drew; Pratson, Lincoln

2015-01-01

Between 2008–2012, electricity generated (GWh) from coal, the longtime dominant fuel for electric power in the US, declined 24%, while electricity generated from natural gas, wind and solar grew by 39%, 154%, and 400%, respectively. These shifts had major effects on domestic employment in those sectors of the coal, natural gas, wind and solar industries involved in operations and maintenance (O&M) activities for electricity generation. Using an economic input–output model, we estimate that the coal industry lost more than 49,000 jobs (12%) nationally over the five-year period, while in the natural gas, solar, and wind industries, employment increased by nearly 175,000 jobs (21%). We also combine published ratios for jobs per unit of fuel production and per megawatt of power plant capacity with site-specific data on fuel production and power plant retirements, additions and capacity changes to estimate and map direct job changes at the county level. The maps show that job increases in the natural gas, solar and wind industries generally did not occur where there were significant job losses in the coal industry, particularly in West Virginia and Kentucky. -- Highlights: •We examine shifts in the U.S. electricity industry from 2008–2012 by sector. •We use an economic input–output model to estimate direct and indirect jobs. •We conducted an analytical, county level geospatial analysis using ArcGIS. •The coal sector suffered significant job losses, mainly in traditional coal regions. •Those losses were offset by gains, but typically not in the same geographic areas

Carbon pricing, nuclear power and electricity markets

Energy Technology Data Exchange (ETDEWEB)

Cameron, R.; Keppler, J. H. [OECD Nuclear Energy Agency, 12, boulevard des Iles, 92130 Issy-les-Moulineaux (France)

2012-07-01

In 2010, the NEA in conjunction with the International Energy Agency produced an analysis of the Projected Costs of Electricity for almost 200 power plants, covering nuclear, fossil fuel and renewable electricity generation. That analysis used lifetime costs to consider the merits of each technology. However, the lifetime cost analysis is less applicable in liberalised markets and does not look specifically at the viewpoint of the private investor. A follow-up NEA assessment of the competitiveness of nuclear energy against coal- and gas-fired generation under carbon pricing has considered just this question. The economic competition in electricity markets is today between nuclear energy and gas-fired power generation, with coal-fired power generation not being competitive as soon as even modest carbon pricing is introduced. Whether nuclear energy or natural gas comes out ahead in their competition depends on a number of assumptions, which, while all entirely reasonable, yield very different outcomes. The analysis in this study has been developed on the basis of daily data from European power markets over the last five-year period. Three different methodologies, a Profit Analysis looking at historic returns over the past five years, an Investment Analysis projecting the conditions of the past five years over the lifetime of plants and a Carbon Tax Analysis (differentiating the Investment Analysis for different carbon prices) look at the issue of competitiveness from different angles. They show that the competitiveness of nuclear energy depends on a number of variables which in different configurations determine whether electricity produced from nuclear power or from CCGTs generates higher profits for its investors. These are overnight costs, financing costs, gas prices, carbon prices, profit margins (or mark-ups), the amount of coal with carbon capture and electricity prices. This paper will present the outcomes of the analysis in the context of a liberalised

Carbon pricing, nuclear power and electricity markets

International Nuclear Information System (INIS)

Cameron, R.; Keppler, J. H.

2012-01-01

In 2010, the NEA in conjunction with the International Energy Agency produced an analysis of the Projected Costs of Electricity for almost 200 power plants, covering nuclear, fossil fuel and renewable electricity generation. That analysis used lifetime costs to consider the merits of each technology. However, the lifetime cost analysis is less applicable in liberalised markets and does not look specifically at the viewpoint of the private investor. A follow-up NEA assessment of the competitiveness of nuclear energy against coal- and gas-fired generation under carbon pricing has considered just this question. The economic competition in electricity markets is today between nuclear energy and gas-fired power generation, with coal-fired power generation not being competitive as soon as even modest carbon pricing is introduced. Whether nuclear energy or natural gas comes out ahead in their competition depends on a number of assumptions, which, while all entirely reasonable, yield very different outcomes. The analysis in this study has been developed on the basis of daily data from European power markets over the last five-year period. Three different methodologies, a Profit Analysis looking at historic returns over the past five years, an Investment Analysis projecting the conditions of the past five years over the lifetime of plants and a Carbon Tax Analysis (differentiating the Investment Analysis for different carbon prices) look at the issue of competitiveness from different angles. They show that the competitiveness of nuclear energy depends on a number of variables which in different configurations determine whether electricity produced from nuclear power or from CCGTs generates higher profits for its investors. These are overnight costs, financing costs, gas prices, carbon prices, profit margins (or mark-ups), the amount of coal with carbon capture and electricity prices. This paper will present the outcomes of the analysis in the context of a liberalised

Energetic diversification in the interconnected electric system

International Nuclear Information System (INIS)

Villanueva M, C.; Beltran M, H.; Serrano G, J.A.

2007-01-01

In the interconnected electric system of Mexico the demanded electricity in different timetable periods it is synthesized in the annual curve of load duration, which is characterized by three regions. The energy in every period is quantified according to the under curve areas in each region, which depend of the number of hours in that the power demand exceeds the minimum and the intermediate demands respectively that are certain percentages of the yearly maximum demand. In that context, the generating power stations are dispatched according to the marginal costs of the produced electricity and the electric power to be generated every year by each type of central it is located in some of the regions of the curve of load duration, as they are their marginal costs and their operation characteristic techniques. By strategic reasons it is desirable to diversify the primary energy sources that are used in the national interconnected system to generate the electricity that demand the millions of consumers that there are in Mexico. On one hand, when intensifying the use of renewable sources and of nucleo electric centrals its decrease the import volumes of natural gas, which has very volatile prices and it is a fuel when burning in the power stations produces hothouse gases that are emitted to the atmosphere. On the other hand, when diversifying the installed capacity of the different central types in the interconnected system, a better adaptation of the produced electricity volumes is achieved by each type to the timetable variation, daily, weekly and seasonal of the electric demand, as one manifests this in the curve of load duration. To exemplify a possible diversification plan of the installed capacity in the national interconnected system that includes nucleo electric centrals and those that use renewable energy, charts are presented that project of 2005 at 2015 the capacity, energy and ost of the electricity of different central types, located in each one of the

Estimation of electricity demand of Iran using two heuristic algorithms

International Nuclear Information System (INIS)

Amjadi, M.H.; Nezamabadi-pour, H.; Farsangi, M.M.

2010-01-01

This paper deals with estimation of electricity demand of Iran based on economic indicators using Particle Swarm Optimization (PSO) Algorithm. The estimation is based on Gross Domestic Product (GDP), population, number of customers and average price electricity by developing two different estimation models: a linear model and a non-linear model. The proposed models are obtained based upon available actual data of 21 years; since 1980-2000. Then the models obtained are used to estimate the electricity demand of the target years; for a period of time e.g. 2001-2006 and the results obtained are compared with the actual demand during this period. Furthermore, to validate the results obtained by PSO, genetic algorithm (GA) is applied to solve the problem. The results show that the PSO is a useful optimization tool for solving the problem using two developed models and can be used as an alternative solution to estimate the future electricity demand.

The effect of costs and regulation on electricity prices

International Nuclear Information System (INIS)

Schlaf, E.P.

1991-01-01

Two distinct econometric tests were performed to determine if state price regulation of public utilities has had a measurable impact on retail electricity prices. The results of both tests agree that, during the 1971-1985 period, average national electricity prices in each of the three major consuming sectors and the four Census regions were below the level which would have been preferred by profit-maximizing monopolists. Electricity consumers received price benefits during the sample period as a result of regulation. The first test of the effectiveness of state price regulation used a 'revealed preference' approach by comparing the actual prices set by regulatory commissioners with prices and outcomes predicted by three competing theories of regulatory motivation. The second test of the effectiveness of price regulation combined traditional cost function inputs with regulatory variables in reduced-form price equations to determine whether the amount of regulatory intensity, as measured by the number of staff members per regulated utility, is associated with declining electricity prices and whether appointed commissioners allow higher prices than elected commissioners

The integration of the periodic production in the liberalized electric power markets: from the technic expenditures to the economic taxes imposed by the operating rules of the markets; L'integration de la production intermittente dans les marches electriques liberalises: des surcouts techniques aux penalites economiques imposees par les regles de fonctionnement des marches

Energy Technology Data Exchange (ETDEWEB)

Menanteau, Ph.; Finon, D.; Lamy, M.L

2003-03-01

In the framework of the climatic change and the energy supply safety, the european directive aims to promote the renewable energy production in Europe. Some of the renewable energy sources, as the wind power or the micro-hydroelectric power, are naturally periodic. Their introduction in the electric networks will create problems because of this periodic nature, problems which are new for the electric network producers and managers. These problems generate technical expenditures, which may be compensate by the economic penalties of the electric power market operating. In this context the document details the expenditures associated to the periodicity, the economic penalties by an analysis of the british market and analyses the possibilities to limit these economic penalties in order to reduce the conflicts between the electric market liberalization and the promotion of the renewable energies development. (A.L.B.)

Wire Probe Antenna (WPT) and Electric Field Detector (EFD0 of Plasma Wave Experiment (PWE) aboard ARASE: Specifications and Evaluation results

Science.gov (United States)

Matsuda, S.; Kasaba, Y.; Ishisaka, K.; Kasahara, Y.; Imachi, T.; Yagitani, S.; Kojima, H.; Kurita, S.; Shoji, M.; Hori, T.; Shinbori, A.; Teramoto, M.; Miyoshi, Y.; Nakagawa, T.; Takahashi, N.; Nishimura, Y.; Matsuoka, A.; Tsuchiya, F.; Kumamoto, A.; Nomura, R.

2017-12-01

This paper summarizes the specifications and the evaluation results of Wire Probe Antenna (WPT) and Electric Field Detector (EFD), which are the key parts of Plasma Wave Experiment (PWE) aboard the Arase satellite, in their initial operations and the beginning phase of the full observations. WPT consists of the two dipole antennas as electric field sensors with 32m tip-to-tip length, with a sphere probe (6 cm diameter) attached at each end of wires (length: 15-m). They are extended orthogonally in the spin plane which is roughly perpendicular to the Sun. It enables the PWE to measure the E-field from DC to 10 MHz. This system is almost compatible to the WPT of the Plasma Wave Investigation (PWI) aboard BepiColombo Mercury Magnetospheric Orbiter, except the material of the spherical probe (ERG: Aluminium alloy, MMO: Titanium-alloy). This paper shows the extended length evaluated by the Lorentz force (spacecraft velocity x B-field) and the antenna impedance as the basic information of the E-field measurement capability of the PWE E-field receivers, with the evaluation for the possible degradation of the probe surface coated by TiAlN as BepiColombo. EFD is the 2-channel low frequency electric receiver as a part of EWO (EFD/WFC/OFA), for the measurement of 2ch electric field in the spin-plane with the sampling rate of 512 Hz (dynamic range: +-200 mV/m, +-3 V/m) and the 4ch spacecraft potential with the sampling rate of 128 Hz (dynamic range: +-100 V), respectively, with the bias control capability fed to the WPT probes. The electric field in DC - 232Hz provides the capability to detect (1) the fundamental information of the plasma dynamics and accelerations and (2) the characteristics of MHD and ion waves with their Poynting vectors with the data measured by MGF and PWE/WFC-B connected to PWE/SCM. The spacecraft potential provides the electron density information with UHR frequency. This paper also introduces the data sets and their calibration status.

Projected costs of generating electricity from power stations for commissioning in the period 1995-2000

International Nuclear Information System (INIS)

1989-01-01

The study reviews the projected electricity generation costs for the base load power generation options expected to be available in the medium term, using an agreed common economic methodology. Cost projections were obtained for nuclear and fossil fuelled plants that could in principle be commissioned in the mid-1990s, or shortly thereafter, although not all countries plan to commission plants at that time. The major changes in expectations compared with earlier studies, apart from those associated with changed perceptions of fossil fuel prices, include significantly lower nuclear investment costs for the United States, associated with an improved design and the expectation of achieving shorter construction periods than projected in the 1985 study, and generally lower nuclear fuel costs. Some countries project higher operation and maintenance costs for either coal-fired or nuclear plant or both. In the case of coal-fired plants these may be associated with the extra costs of operating desulphurisation equipment. The most marked change in nuclear operating and maintenance costs has taken place in the United States, where these costs are now expected to be twice as large as the projected nuclear fuel costs. There remain major differences in investment cost expectations between countries. The reasons for these differences have been examined in previous studies. They arise from differences in factor costs, regulatory approach, design and siting, and exchange rates which do not adequately reflect the differences in the capital investment costs between countries. In brief, most OECD countries continue to expect nuclear power to have a lower levelised generating cost than coal-fired generation when using their own technical and economic assumptions

Premixed combustion under electric field in a constant volume chamber

KAUST Repository

Cha, Min Suk

2012-12-01

The effects of electric fields on outwardly propagating premixed flames in a constant volume chamber were experimentally investigated. An electric plug, subjected to high electrical voltages, was used to generate electric fields inside the chamber. To minimize directional ionic wind effects, alternating current with frequency of 1 kHz was employed. Lean and rich fuel/air mixtures for both methane and propane were tested to investigate various preferential diffusion conditions. As a result, electrically induced instability showing cracked structure on the flame surface could be observed. This cracked structure enhanced flame propagation speed for the initial period of combustion and led to reduction in flame initiation and overall combustion duration times. However, by analyzing pressure data, it was found that overall burning rates are not much affected from the electric field for the pressurized combustion period. The reduction of overall combustion time is less sensitive to equivalence ratio for methane/air mixtures, whereas the results demonstrate pronounced effects on a lean mixture for propane. The improvement of combustion characteristics in lean mixtures will be beneficial to the design of lean burn engines. Two hypothetical mechanisms to explain the electrically induced instability were proposed: 1) ionic wind initiated hydrodynamic instability and 2) thermodiffusive instability through the modification of transport property such as mass diffusivity. © 2012 IEEE.

Premixed combustion under electric field in a constant volume chamber

KAUST Repository

Cha, Min; Lee, Yonggyu

2012-01-01

The effects of electric fields on outwardly propagating premixed flames in a constant volume chamber were experimentally investigated. An electric plug, subjected to high electrical voltages, was used to generate electric fields inside the chamber. To minimize directional ionic wind effects, alternating current with frequency of 1 kHz was employed. Lean and rich fuel/air mixtures for both methane and propane were tested to investigate various preferential diffusion conditions. As a result, electrically induced instability showing cracked structure on the flame surface could be observed. This cracked structure enhanced flame propagation speed for the initial period of combustion and led to reduction in flame initiation and overall combustion duration times. However, by analyzing pressure data, it was found that overall burning rates are not much affected from the electric field for the pressurized combustion period. The reduction of overall combustion time is less sensitive to equivalence ratio for methane/air mixtures, whereas the results demonstrate pronounced effects on a lean mixture for propane. The improvement of combustion characteristics in lean mixtures will be beneficial to the design of lean burn engines. Two hypothetical mechanisms to explain the electrically induced instability were proposed: 1) ionic wind initiated hydrodynamic instability and 2) thermodiffusive instability through the modification of transport property such as mass diffusivity. © 2012 IEEE.

Stimulation of the substantia nigra influences the specification of memory-guided saccades

Science.gov (United States)

Mahamed, Safraaz; Garrison, Tiffany J.; Shires, Joel

2013-01-01

In the absence of sensory information, we rely on past experience or memories to guide our actions. Because previous experimental and clinical reports implicate basal ganglia nuclei in the generation of movement in the absence of sensory stimuli, we ask here whether one output nucleus of the basal ganglia, the substantia nigra pars reticulata (nigra), influences the specification of an eye movement in the absence of sensory information to guide the movement. We manipulated the level of activity of neurons in the nigra by introducing electrical stimulation to the nigra at different time intervals while monkeys made saccades to different locations in two conditions: one in which the target location remained visible and a second in which the target location appeared only briefly, requiring information stored in memory to specify the movement. Electrical manipulation of the nigra occurring during the delay period of the task, when information about the target was maintained in memory, altered the direction and the occurrence of subsequent saccades. Stimulation during other intervals of the memory task or during the delay period of the visually guided saccade task had less effect on eye movements. On stimulated trials, and only when the visual stimulus was absent, monkeys occasionally (∼20% of the time) failed to make saccades. When monkeys made saccades in the absence of a visual stimulus, stimulation of the nigra resulted in a rotation of the endpoints ipsilaterally (∼2°) and increased the reaction time of contralaterally directed saccades. When the visual stimulus was present, stimulation of the nigra resulted in no significant rotation and decreased the reaction time of contralaterally directed saccades slightly. Based on these measurements, stimulation during the delay period of the memory-guided saccade task influenced the metrics of saccades much more than did stimulation during the same period of the visually guided saccade task. Because these effects

10 CFR 603.1295 - Periodic audit.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Periodic audit. 603.1295 Section 603.1295 Energy... Used in this Part § 603.1295 Periodic audit. An audit of a participant, performed at an agreed-upon... an audit may cover. A periodic audit of a participant differs from an award-specific audit of an...

Electricity trade and GHG emissions: Assessment of Quebec's hydropower in the Northeastern American market (2006-2008)

International Nuclear Information System (INIS)

Ben Amor, Mourad; Pineau, Pierre-Olivier; Gaudreault, Caroline; Samson, Rejean

2011-01-01

Worldwide electricity sector reforms open up electricity markets and increase trades. This has environmental consequences as exports and imports either increase or decrease local production and consequently greenhouse gas (GHG) emissions. This paper's objective is to illustrate the importance of electricity trade's impact on GHG emissions by providing an estimate of the net GHG emissions resulting from these trades. To achieve this objective, Quebec hourly electricity exchanges with adjacent jurisdictions were examined over the 2006-2008 period. In order to associate a specific GHG emission quantity to electricity trades, hourly marginal electricity production technologies were identified and validated using the Ontario hourly output per power plant and information released in the Quebec adjacent system operator reports. It is estimated that over three years, imports into Quebec were responsible for 7.7 Mt of GHG, while Quebec hydropower exports avoided 28.3 Mt of GHG emissions. Hence, the net result is 20.6 Mt of avoided emissions over 2006-2008, or about 7 Mt per year, which corresponds to more than 8% of the Quebec yearly GHG emissions. When GHG emissions from all life cycle stages (resource extraction to end-of-life) are accounted for, the net avoided GHG emissions increase by 35%, to 27.9 Mt. - Research highlights: → Environmental benefits of hydropower exports are considerable. → Detailed GHG assessment of such electricity trade is missing from the literature. → Net GHG emissions estimate resulting from such trade is provided. → GHG gains are significant in the Northeast American electricity market due to such electricity trade.

Energy, electricity and nuclear power

International Nuclear Information System (INIS)

Reuss, P.; Naudet, G.

2008-01-01

After an introduction recalling what energy is, the first part of this book presents the present day energy production and consumption and details more particularly the electricity 'vector' which is an almost perfect form of energy despite the fact that it is not a primary energy source: it must be generated from another energy source and no large scale storage of this energy is possible. The second part of the book is devoted to nuclear energy principles and to the related technologies. Content: 1 - What does energy mean?: the occurrence of the energy concept, the classical notion of energy, energy notion in modern physics, energy transformations, energy conservation, irreversibility of energy transformations, data and units used in the energy domain; 2 - energy production and consumption: energy systems, energy counting, reserves and potentialities of energy resources, production of primary energies, transport and storage of primary energies, energy consumption, energy saving, energy markets and prices, energy indicators; 3 - electric power: specificity of electricity and the electric system, power networks, power generation, electricity storage, power consumption and demand, power generation economics, electricity prices and market; 4 - physical principles of nuclear energy: nuclei structure and binding energy, radioactivity and nuclear reactions, nuclear reactions used in energy generation, basics of fission reactors physics; 5 - nuclear techniques: historical overview, main reactor types used today, perspectives; 6 - fuel cycle: general considerations, uranium mining, conversion, enrichment, fuel fabrication, back-end of the cycle, plutonium recycle in water cooled reactors; 7 - health and environmental aspects of nuclear energy: effects on ionizing radiations, basics of radiation protection, environmental impacts of nuclear energy, the nuclear wastes problem, specific risks; 8 - conclusion; 9 - appendixes (units, physics constants etc..)

Electricity Prices, Large-Scale Renewable Integration, and Policy Implications

OpenAIRE

Kyritsis, Evangelos; Andersson, Jonas; Serletis, Apostolos

2016-01-01

This paper investigates the effects of intermittent solar and wind power generation on electricity price formation in Germany. We use daily data from 2010 to 2015, a period with profound modifications in the German electricity market, the most notable being the rapid integration of photovoltaic and wind power sources, as well as the phasing out of nuclear energy. In the context of a GARCH-in-Mean model, we show that both solar and wind power Granger cause electricity prices, that solar power ...

Reliability Evaluation for Optimizing Electricity Supply in a Developing Country

Directory of Open Access Journals (Sweden)

Mark Ndubuka NWOHU

2007-09-01

Full Text Available The reliability standards for electricity supply in a developing country, like Nigeria, have to be determined on past engineering principles and practice. Because of the high demand of electrical power due to rapid development, industrialization and rural electrification; the economic, social and political climate in which the electric power supply industry now operates should be critically viewed to ensure that the production of electrical power should be augmented and remain uninterrupted. This paper presents an economic framework that can be used to optimize electric power system reliability. Finally the cost models are investigated to take into account the economic analysis of system reliability, which can be periodically updated to improve overall reliability of electric power system.

Electrical cardioversion

Science.gov (United States)

Sucu, Murat; Davutoglu, Vedat; Ozer, Orhan

2009-01-01

External electrical cardioversion was first performed in the 1950s. Urgent or elective cardioversions have specific advantages, such as termination of atrial and ventricular tachycardia and recovery of sinus rhythm. Electrical cardioversion is life-saving when applied in urgent circumstances. The succcess rate is increased by accurate tachycardia diagnosis, careful patient selection, adequate electrode (paddles) application, determination of the optimal energy and anesthesia levels, prevention of embolic events and arrythmia recurrence and airway conservation while minimizing possible complications. Potential complications include ventricular fibrillation due to general anesthesia or lack of synchronization between the direct current (DC) shock and the QRS complex, thromboembolus due to insufficient anticoagulant therapy, non-sustained VT, atrial arrhythmia, heart block, bradycardia, transient left bundle branch block, myocardial necrosis, myocardial dysfunction, transient hypotension, pulmonary edema and skin burn. Electrical cardioversion performed in patients with a pacemaker or an incompatible cardioverter defibrillator may lead to dysfunction, namely acute or chronic changes in the pacing or sensitivity threshold. Although this procedure appears fairly simple, serious consequences might occur if inappropriately performed. PMID:19448376

Electricity and gas market observatory. 2. Quarter 2007

International Nuclear Information System (INIS)

2007-01-01

The purpose of the observatory is to provide the general public with indicators for monitoring market deregulation. It both covers the wholesale and retail electricity and gas markets in Metropolitan France. This observatory is updated every three months and data are available on CRE web site (www.cre.fr). The present observatory is dedicated only to eligible customers before 1 July 2007, i.e. non-residential customers. Statistics related to residential customers will be published in the next observatory (1 December 2007). Content: A - The electricity market: The retail electricity market (Introduction, Non-residential customer segments and their respective weights, Status at July 1, 2007, Dynamic analysis: 2. Quarter 2007); The wholesale electricity market (Introduction, Wholesale market activity in France, Wholesale market activity in France, Prices on the French wholesale market and European comparison, Import and export volumes, Concentration of the French electricity market, Striking fact of the second quarter 2007); B - The gas market: The retail gas market (Introduction, The non-residential customer segments and their respective weights, Status at July 1, 2007); The wholesale gas market (Gas pricing and gas markets in Europe, The wholesale market in France); C - Appendices: Electricity and gas market observatories combined glossary, Specific electricity market observatory glossary, Specific gas market observatory glossary

PRICING ELECTRIC POWER UNDER A HYBRID WHOLESALE MECHANISM: EVALUATING THE TURKISH ELECTRICITY MARKET

Directory of Open Access Journals (Sweden)

Hatice Karahan

2013-01-01

Full Text Available During the restructuring process, Turkish electricity sector has gone through significant changes both in wholesale and retail markets. In this framework, the Market Financial Settlement Mechanism established for handling market imbalances has become a spot market in time. So, it can be claimed that the wholesale electricity market in Turkey is a hybrid mechanism composed of bilateral contracts and the balancing market. On the other hand, the main target of liberalization program is providing consumers with affordable electric power. Hence, this study attempts to explore the link between retail tariffs for ineligible consumers and prices in the two wholesale mechanisms, in the period after the launch of the day-ahead market. Findings suggest that regulated wholesale prices are more effective in the determination of end-user prices, whereas unregulated ones might have a price reduction effect in case the free market dominates. However, the volatility in spot market prices implies that the sector would better continue with the hybrid mechanism for quite some time.

Load profiles analysis for electricity market

Directory of Open Access Journals (Sweden)

Radu Porumb

2014-04-01

Full Text Available In the wake of electric power system transition towards smart grids, and the adoption of the electric market schemes, electric utilities are facing the need of a better load profiles understanding for their customers. In this work, some key objectives were addresses, such as definition of the mathematical model for calculating the hourly energy specific, identification of the three target groups for users who have developed consumer profiles, definition of the two types of significant load and assessment of the impact of using consumer profiles on users.

Motor Torque Calculations For Electric Vehicle

Directory of Open Access Journals (Sweden)

Saurabh Chauhan

2015-08-01

Full Text Available Abstract It is estimated that 25 of the total cars across the world will run on electricity by 2025. An important component that is an integral part of all electric vehicles is the motor. The amount of torque that the driving motor delivers is what plays a decisive role in determining the speed acceleration and performance of an electric vehicle. The following work aims at simplifying the calculations required to decide the capacity of the motor that should be used to drive a vehicle of particular specifications.

76 FR 17577 - Increased Scope of Coverage for Electric Motors

Science.gov (United States)

2011-03-30

... Scope of Coverage for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy... conservation standards for electric motors. Specifically, DOE seeks information to assist DOE in determining whether to develop energy conservation standards for certain types of electric motors that are currently...

Signal specific electric potential sensors for operation in noisy environments

International Nuclear Information System (INIS)

Beardsmore-Rust, S T; Prance, R J; Aydin, A; Prance, H; Harl, C J; Stiffell, P B

2009-01-01

Limitations on the performance of electric potential sensors are due to saturation caused by environmental electromagnetic noise. The work described involves tailoring the response of the sensors to reject the main components of the noise, thereby enhancing both the effective dynamic range and signal to noise. We show that by using real-time analogue signal processing it is possible to detect a human heartbeat at a distance of 40 cm from the front of a subject in an unshielded laboratory. This result has significant implications both for security sensing and biometric measurements in addition to the more obvious safety related applications.

Signal specific electric potential sensors for operation in noisy environments

Energy Technology Data Exchange (ETDEWEB)

Beardsmore-Rust, S T; Prance, R J; Aydin, A; Prance, H; Harl, C J; Stiffell, P B, E-mail: r.j.prance@sussex.ac.u [Centre for Physical Electronics and Quantum Technology, Department of Engineering and Design, University of Sussex, Falmer, Brighton, BN1 9QT (United Kingdom)

2009-07-01

Limitations on the performance of electric potential sensors are due to saturation caused by environmental electromagnetic noise. The work described involves tailoring the response of the sensors to reject the main components of the noise, thereby enhancing both the effective dynamic range and signal to noise. We show that by using real-time analogue signal processing it is possible to detect a human heartbeat at a distance of 40 cm from the front of a subject in an unshielded laboratory. This result has significant implications both for security sensing and biometric measurements in addition to the more obvious safety related applications.

Energy, electricity and nuclear power estimates for the period up to 2020. Jul 1998 ed.

International Nuclear Information System (INIS)

1998-01-01

Reference Data Series No. 1 is an annual publication - currently in its eighteenth edition - containing estimates of energy, electricity and nuclear power trends up to the year 2020. The time horizon covered in the previous editions was up to 2015. (author)

Radioisotope electric propulsion of sciencecraft to the outer Solar System and near-interstellar space

International Nuclear Information System (INIS)

Noble, R.J.

1999-01-01

Radioisotopes have been used successfully for more than 25 years to supply the heat for thermoelectric generators on various deep-space probes. Radioisotope electric propulsion (REP) systems have been proposed as low-thrust ion propulsion units based on radioisotope electric generators and ion thrusters. The perceived liability of radioisotope electric generators for ion propulsion is their high mass. Conventional radioisotope thermoelectric generators have a specific mass of about 200 kg/kW of electric power. Many development efforts have been undertaken with the aim of reducing the specific mass of radioisotope electric systems. Recent performance estimates suggest that specific masses of 50 kg/kW may be achievable with thermophotovoltaic and alkali metal thermal-to-electric conversion generators. Powerplants constructed from these near-term radioisotope electric generators and long-life ion thrusters will likely have specific masses in the range of 100 to 200 kg/kW of thrust power if development continues over the next decade. In earlier studies, it was concluded that flight times within the Solar System are indeed insensitive to reductions in the powerplant specific mass, and that a timely scientific program of robotic planetary rendezvous and near-interstellar space missions is enabled by primary electric propulsion once the powerplant specific mass is in the range of 100 to 200 kg/kW. Flight times can be substantially reduced by using hybrid propulsion schemes that combine chemical propulsion, gravity assist, and electric propulsion. Hybrid schemes are further explored in this article to illustrate how the performance of REP is enhanced for Pluto rendezvous, heliopause orbiter, and gravitational lens missions

Electrical safety in health care area

International Nuclear Information System (INIS)

Amer, G.M.

2011-01-01

An electrical safety in health care area is necessary to protect patients and staff from potential electrical hazards.Functional, accurate and safe clinical equipment is an essential requirement in the provision of health services. Well-maintained equipment will give clinicians greater confidence in the reliability of its performance and contribute to a high standard of client care. Clinical equipment, like all health services, requires annual or periodic servicing of medical equipment. In addition to planned servicing and preventative maintenance, there may be the unexpected failure of medical (and other) equipment, necessitating repair. In general, clinical equipment that has an electrical power source and has direct contact with the client must be serviced as a first priority. In this presentation, a review of the main concepts related to the electrical safety in health area,theinternational standard, the distribution of electric power in hospital and protection against shockwill be introduced. Protection system in hospital will be presented in its two ways: inpower distribution in hospitaland inbiomedical equipment design,finally the optimum maintenance technology and safety tests in health care areawill presented also.

Estimating and decomposing productivity growth of the electricity generation industry in Malaysia: A stochastic frontier analysis

International Nuclear Information System (INIS)

See, Kok Fong; Coelli, Tim

2013-01-01

This study examines the total factor productivity (TFP) growth of the Malaysian electricity generation industry over the 1998 to 2005 period. The stochastic frontier analysis (SFA) approach is used to measure TFP change and decompose TFP growth into efficiency change and technical progress. We find that it achieved average annual TFP growth of 2.34%, with technical change contributing the most to the TFP growth over the eight year period. We hence hypothesise that the new power plants with their newer capital-embodied technologies commencing during the sample period are likely to be the main reason for this strong technical change. In addition, it is also noted that this estimate for the Malaysian electricity generation industry is larger than the estimate obtained for the electricity sector as a whole, where we obtain 1.34% per year for a comparable period. -- Highlights: •This is the first empirical study that examines the TFP growth of the Malaysian electricity generation industry using the SFA method. •An average annual TFP change of the Malaysian electricity generation industry over eight years (1998-2005) has been achieved at 2.34% per year. •The technical progress contributing the most to the TFP growth and technical efficiency change and scale change making small contributions over the sample period

Specificity of the tomography implementation in electric arc domain - Validity in medical imaging

International Nuclear Information System (INIS)

Benech, Julie

2008-01-01

The aim of these works was to implement a new experimental method to characterize 3D thermal plasmas by emission spectroscopy. The method used is based on tomographic technique which is widely used in medical imaging nowadays. However, tomography that we have developed and applied to electric arc is specific as the number of accessible projections angles is strongly limited: 4 projections our case against basically 64 in medical imaging. The particularity of our experimental tomographic system is that measurements are resolved both spectrally and spatially. The spectral resolution is necessary to determine the temperature values from method based on atomic line intensity. The spatial resolution is needed to simultaneously acquire the whole width of the plasma and so to reconstruct a whole cross-section in only one acquisition. One of the principal objective was to realize the experimental system of four-view tomography for thermal plasmas. Thanks to this device, we showed that the characterization of non-axisymmetric plasma is possible and that it enables to reconstruct 3D temperature maps. Finally, our tomographic method is applied with medical imaging data acquired in SPECT (Single Photon Emission Computed Tomography). These tests allowed validating the use of our tomographic reconstruction technique in SPECT, particularly the used iterative algebraic algorithm and the limited-view configuration. (author) [fr

Adolescents and electricity consumption; Investigating sociodemographic, economic, and behavioural influences on electricity consumption in households

International Nuclear Information System (INIS)

Wallis, Hannah; Nachreiner, Malte; Matthies, Ellen

2016-01-01

With respect to changes in the energy systems of many countries, electricity consumption in households is an important topic. Extensive research has investigated the various determinants of electricity consumption. However, insights into how specific sociodemographic, behavioural, and attitudinal determinants influence residential electricity consumption are still scarce. In this study, we used hierarchical regression analysis to systematically investigate these determinants (including household engagement in electricity saving) along with a wide range of other measures in a sample of German households (N=763). Special attention was given to households with adolescents and children by analysing the influence of the number of adolescents on electricity consumption in a path model. Our results indicate that sociodemographic influences can be explained by the purchasing and use behaviours of residents. Our findings also suggest that the use of behavioural information provides a more detailed picture of the conditions of electricity consumption and thus allows for more appropriate policy planning. - Highlights: •We examined causal drivers of sociodemographic influences on electricity consumption •Sociodemographic influences can be explained by behaviour •Influence of adolescents is mediated by their purchases of IT appliances •It is necessary to also use behavioural information for policy planning

Can rural electric cooperatives survive in a restructured US electric market? An empirical analysis

International Nuclear Information System (INIS)

Greer, Monica Lynne

2003-01-01

This paper examines the ability of rural electric distribution cooperatives to continue operating in their present form in a restructured electricity market. More specifically, I develop and estimate a quadratic cost model, which, unlike many of the cost functions employed in studies of this nature, conforms to all of the properties of a proper cost function. Using 1996 data, I find that these firms are not operating in a cost-minimizing fashion. This finding seems to occur because each is too small in terms of the quantity of electricity distributed. As a result, mergers between these firms could yield substantial savings and help ensure their survival in their present form in a deregulated market

The kinematic advantage of electric cars

Science.gov (United States)

Meyn, Jan-Peter

2015-11-01

Acceleration of a common car with with a turbocharged diesel engine is compared to the same type with an electric motor in terms of kinematics. Starting from a state of rest, the electric car reaches a distant spot earlier than the diesel car, even though the latter has a better specification for engine power and average acceleration from 0 to 100 km h-1. A three phase model of acceleration as a function of time fits the data of the electric car accurately. The first phase is a quadratic growth of acceleration in time. It is shown that the tenfold higher coefficient for the first phase accounts for most of the kinematic advantage of the electric car.

Flinders University Electric Vehicle Project

Science.gov (United States)

Atkinson, D. A.

1973-01-01

Outlines the specifications and principles involved in the operation of an electric car developed by the Institute of Solar and Electochemical Energy Conversion at Flinders University in South Australia. (JR)

Competition in decentralized electricity markets: Three papers on electricity auctions

Science.gov (United States)

Harbord, David William Cameron

This thesis consists of three self-contained papers on the analysis of electricity auctions written over a period of twelve years. The first paper models price competition in a decentralized wholesale market for electricity as a first-price, sealed-bid, multi-unit auction. In both the pure and mixed-strategy equilibria of the model, above marginal cost pricing and inefficient despatch of generating units occur. An alternative regulatory pricing rule is considered and it is shown that offering to supply at marginal cost can be induced as a dominant strategy for all firms. The second paper analyses strategic interaction between long-term contracts and price competition in the British electricity wholesale market, and confirms that forward contracts will tend to put downward pressure on spot market prices. A 'strategic commitment' motive for selling forward contracts is also identified: a generator may commit itself to bidding lower prices into the spot market in order to ensure that it will be despatched with its full capacity. The third paper characterizes bidding behavior and market outcomes in uniform and discriminatory electricity auctions. Uniform auctions result in higher average prices than discriminatory auctions, but the ranking in terms of productive efficiency is ambiguous. The comparative effects of other market design features, such as the number of steps in suppliers' bid functions, the duration of bids and the elasticity of demand are analyzed. The paper also clarifies some methodological issues in the analysis of electricity auctions. In particular we show that analogies with continuous share auctions are misplaced so long as firms are restricted to a finite number of bids.

Characterization of the household electricity consumption in the EU, potential energy savings and specific policy recommendations

Energy Technology Data Exchange (ETDEWEB)

Fonseca, Paula; Almeida, Anibal de (ISR-Univ. of Coimbra, Dep. Electrical Engineering (Portugal)). e-mail: pfonseca@isr.uc.pt; Feilberg, Nicolai (SINTEF Energiforskning AS (Norway)); Markogiannakis, George (Centre for Renewable Energy Sources - CRES (Greece)); Kofod, Casper (Energy piano (Denmark))

2009-07-01

Although significant improvements in energy efficiency have been achieved in home appliances and lighting, the electricity consumption in the average EU-27 household has been increasing by about 2% per year during the past 10 years. Some reasons for such increase are associated with an increased degree of basic comfort and level of amenities (particularly in the new EU member countries) and also with the widespread utilization of relatively new types of loads whose penetration and use has experienced a very significant growth in recent years. With the objective of contributing to an increased understanding of the energy consumption in the EU-27 households for the different types of equipment including the consumers' behaviour and comfort levels, and to identify demand trends, a large energy monitoring campaign, co-funded by the IEE programme, was carried out in 12 countries, accompanied by a lifestyle consumer survey. From the measurements carried out it can be concluded that IT and entertainment loads, including standby, are a key contributor to the power demand. In basically all types of loads there is wide range of performance levels, including new emerging technologies, in the models available in the market. Available technology, associated with responsible consumer behaviour, can reduce wasteful consumption. The potential electricity savings that exist in the residential sector in Europe, and that can already be implemented by existing means, like the use of BAT (best available technology) efficient appliances or the elimination/mitigation of standby consumption, can reach up to 48% savings. Specific policy recommendations to promote market transformation and behavioural changes in the equipment selection and operation have been identified.

Nuclear energy perspectives for electric power generation. 2004 vision

International Nuclear Information System (INIS)

Dias, Marcio Soares; Mattos, Joao Roberto Loureiro de; Vasconcelos, Vanderley de; Jordao, Elizabete

2004-01-01

This document is based on the forecasting of the Energy Information Administration/US Department of Energy (EIA/DOE) for the period of 2001-2025 which indicates a growing of 9,800 billions of kWh (73.6 per cent) in the world electric power consumption in that period

Electricity-price arbitrage with plug-in hybrid electric vehicle: Gain or loss?

International Nuclear Information System (INIS)

Shang, Duo; Sun, Guodong

2016-01-01

Customers, utilities, and society can gain many benefits from distributed energy resources (DERs), including plug-in hybrid electric vehicles (PHEVs). Using battery on PHEV to arbitrage electricity price is one of the potential benefits to PHEV owners. There is, however, disagreement on the magnitude of such profit. This study uses a stochastic optimization model to estimate the potential profit from electricity price arbitrage of two types of PHEVs (PHEV-10, and PHEV-40) under three scenarios with variant electricity tariff and PHEV owners over a five-year period. The simulation results indicate that under current market structure, even with significant improvement in battery technologies (e.g., higher efficiency, lower cost), the PHEV owners can't achieve a positive arbitrage profit. This finding implies that expected arbitrage profit solely is not a viable option to engage PHEVs larger adoption. Subsidy and combining PHEV arbitraging with alternative PHEV services are required. - Highlights: •A stochastic optimization model is proposed to assess the arbitrage value of plug-in hybrid electric vehicle (PHEV). •Under current market condition, PHEV owners lose money from conducting PHEV arbitrage if counting battery degradation cost. •PHEV owner loses more money at real time pricing (RTP) than at time of use (TOU) scheme. •Battery improvement will reduce but can't even the arbitrage loss. •Expected arbitrage profit is not a viable option to engage PHEVs in dispatching and in providing ancillary services.

Pricing of electricity in Indonesia

International Nuclear Information System (INIS)

Amarullah, M.

1983-01-01

The objectives of this study are 1) to establish a sound theoretical basis for the determinants of electricity demand in Indonesia, 2) to measure the welfare losses of existing electricity pricing, and 3) to suggest a method of reducing these welfare losses. An econometric model for electricity demand is estimated using pooled time-series of fifteen regions in Indonesia covering the period 1970-1979. The short run price elasticities for both residential and industrial/business sectors are found to be inelastic, while the long run price elasticities for these sectors are found to be quite elastic with a value of -.61 for the residential sector and of -1.1 for the industrial/business sector. Income elasticity is .8 in the short run and around 1.00 for the long run. The exposure variable that captures the accessibility of electricity, has long run elasticity of 1.00 for the residential sector and less than 1.00 for the industrial/business sector. Due to distributional considerations, the 1980's electricity rate was set below its efficient level, and has created a welfare loss of Rp.8273.23 million per month. This accounts for 36.03% of the monthly electricity revenue. A rebate mechanism is recommended in this study, which provides a way to mitigate conflicting aspects of efficiency and equity

Letter to the Editor: Electric Vehicle Demand Model for Load Flow Studies

DEFF Research Database (Denmark)

Garcia-Valle, Rodrigo; Vlachogiannis, Ioannis (John)