An armored-cable-based fiber Bragg grating sensor array for perimeter fence intrusion detection

Science.gov (United States)

Hao, Jianzhong; Dong, Bo; Varghese, Paulose; Phua, Jiliang; Foo, Siang Fook

2012-01-01

In this paper, an armored-cable-based optical fiber Bragg grating (FBG) sensor array, for perimeter fence intrusion detection, is demonstrated and some of the field trial results are reported. The field trial was conducted at a critical local installation in Singapore in December 2010. The sensor array was put through a series of both simulated and live intrusion scenarios to test the stability and suitability of operation in the local environmental conditions and to determine its capabilities in detecting and reporting these intrusions accurately to the control station. Such a sensor array can provide perimeter intrusion detection with fine granularity and preset pin-pointing accuracy. The various types of intrusions included aided or unaided climbs, tampering and cutting of the fence, etc. The unique sensor packaging structure provides high sensitivity, crush resistance and protection against rodents. It is also capable of resolving nuisance events such as rain, birds sitting on the fence or seismic vibrations. These sensors are extremely sensitive with a response time of a few seconds. They can be customized for a desired spatial resolution and pre-determined sensitivity. Furthermore, it is easy to cascade a series of such sensors to monitor and detect intrusion events over a long stretch of fence line. Such sensors can be applied to real-time intrusion detection for perimeter security, pipeline security and communications link security.

Real-time estimation of wildfire perimeters from curated crowdsourcing

Science.gov (United States)

Zhong, Xu; Duckham, Matt; Chong, Derek; Tolhurst, Kevin

2016-04-01

Real-time information about the spatial extents of evolving natural disasters, such as wildfire or flood perimeters, can assist both emergency responders and the general public during an emergency. However, authoritative information sources can suffer from bottlenecks and delays, while user-generated social media data usually lacks the necessary structure and trustworthiness for reliable automated processing. This paper describes and evaluates an automated technique for real-time tracking of wildfire perimeters based on publicly available “curated” crowdsourced data about telephone calls to the emergency services. Our technique is based on established data mining tools, and can be adjusted using a small number of intuitive parameters. Experiments using data from the devastating Black Saturday wildfires (2009) in Victoria, Australia, demonstrate the potential for the technique to detect and track wildfire perimeters automatically, in real time, and with moderate accuracy. Accuracy can be further increased through combination with other authoritative demographic and environmental information, such as population density and dynamic wind fields. These results are also independently validated against data from the more recent 2014 Mickleham-Dalrymple wildfires.

Computing nonsimple polygons of minimum perimeter

NARCIS (Netherlands)

Fekete, S.P.; Haas, A.; Hemmer, M.; Hoffmann, M.; Kostitsyna, I.; Krupke, D.; Maurer, F.; Mitchell, J.S.B.; Schmidt, A.; Schmidt, C.; Troegel, J.

2018-01-01

We consider the Minimum Perimeter Polygon Problem (MP3): for a given set V of points in the plane, find a polygon P with holes that has vertex set V , such that the total boundary length is smallest possible. The MP3 can be considered a natural geometric generalization of the Traveling Salesman

Current Density Distribution on the Perimeter of Waveguide Exciter Cylindrical Vibrator Conductor

OpenAIRE

Zakharia, Yosyp

2010-01-01

On ground of electrodynamic analysis the surface current distribution nonuniformity on the perimeter of waveguide-exciter cylindrical conductor is found. Considerable influence of current distribution nonuniformity on exciter input reactance is established. It is also showed, that the current distribution on the vibrator perimeter, for conductor radius no greater then 0,07 of waveguide cross section breadth, approximately uniform is.

Tooth angulation and dental arch perimeter-the effect of orthodontic bracket prescription.

Science.gov (United States)

Pontes, Luana F; Cecim, Rodolpho L; Machado, Sissy M; Normando, David

2015-08-01

The aim of this study was to evaluate the effects of upper incisors and canine angulations introduced by different bracket prescriptions on dental arch perimeter. Cone beam computerized tomography scans collected using I-Cat (Imaging Sciences International, Hatfield, PA, USA) were selected conveniently from a database of routine exams of a clinical radiology center. Crown and radicular measurements of upper incisors and canines were made and exported to the Autocad 2011 software to create a virtual dental model. The virtual teeth were positioned with an angulation of zero; thereafter, a reference value for the perimeter of the arch was measured. Furthermore, teeth angulations were applied according to the standards of the Edgewise bracket system and the Straight-wire systems: MBT, Capelozza, Andrews, and Roth. The largest linear distances for tooth crown (anterior arch perimeter) and root (radicular distance) were obtained for each bracket prescription. The anterior perimeter for well-aligned incisors and canines without angulation was used as reference (crown: 47.34mm; root: 39.13mm). An increase in the arch perimeter was obtained for all bracket prescriptions evaluated, which ranged from 0.28 and 3.19mm in the Edgewise technique, for the crown and root measurements, respectively, to 1.09 and 11.28mm for the Roth prescription. Bracket prescriptions with greater angulation led to an increased use of space within the dental arch, mainly in the radicular region. The consequence of this radicular angular displacement will need to be further investigated. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

THE IMPACT ASSESSMENT OF THE ABANDONED URANIUM MINING EXPLOITATIONS ON ROCKS AND SOILS - ZIMBRU PERIMETER, ARAD COUNTY

Directory of Open Access Journals (Sweden)

DIANA M. BANU

2016-10-01

Full Text Available The mining exploration and exploitation, especially the activity of uranium mineralization exploration and exploitation has a negative impact on the environment by the alterations of the landscape and the degradation of the environmental factors' quality. The principal environmental factors that could be affected by mining operations resulting from uranium exploitation are: water, air, soil, population, fauna, and flora. The aim of this study is, first, to identify the sources of pollution (natural radionuclides - natural radioactive series of uranium, radium, thorium, potassium and heavy metals that are accompanying the mineralizations for two of the most important environmental factors: rocks and soils: and, second, to assess the pollution impact on those two environmental factors. In order to identify this pollutants and their impact assessment it was selected as a study case an abandoned uranium mining perimeter named the Zimbru perimeter located in Arad County, Romania.

Visual field examination method using virtual reality glasses compared with the Humphrey perimeter

Directory of Open Access Journals (Sweden)

Tsapakis S

2017-08-01

Full Text Available Stylianos Tsapakis, Dimitrios Papaconstantinou, Andreas Diagourtas, Konstantinos Droutsas, Konstantinos Andreanos, Marilita M Moschos, Dimitrios Brouzas 1st Department of Ophthalmology, National and Kapodistrian University of Athens, Athens, Greece Purpose: To present a visual field examination method using virtual reality glasses and evaluate the reliability of the method by comparing the results with those of the Humphrey perimeter.Materials and methods: Virtual reality glasses, a smartphone with a 6 inch display, and software that implements a fast-threshold 3 dB step staircase algorithm for the central 24° of visual field (52 points were used to test 20 eyes of 10 patients, who were tested in a random and consecutive order as they appeared in our glaucoma department. The results were compared with those obtained from the same patients using the Humphrey perimeter.Results: High correlation coefficient (r=0.808, P<0.0001 was found between the virtual reality visual field test and the Humphrey perimeter visual field.Conclusion: Visual field examination results using virtual reality glasses have a high correlation with the Humphrey perimeter allowing the method to be suitable for probable clinical use. Keywords: visual fields, virtual reality glasses, perimetry, visual fields software, smartphone

Perimeter intrusion detection and assessment system

International Nuclear Information System (INIS)

Eaton, M.J.; Jacobs, J.; McGovern, D.E.

1977-11-01

To obtain an effective perimeter intrusion detection system requires careful sensor selection, procurement, and installation. The selection process involves a thorough understanding of the unique site features and how these features affect the performance of each type of sensor. It is necessary to develop procurement specifications to establish acceptable sensor performance limits. Careful explanation and inspection of critical installation dimensions is required during on-site construction. The implementation of these activities at a particular site is discussed

Urban Design Dimension Of Informality At The Perimeter Of Brawijaya University And UIN Maliki Malang

Directory of Open Access Journals (Sweden)

Tyaghita Cesarin Binar

2018-01-01

Full Text Available Informality is one of the commonly emerged issues in urban design which rarely explored, especially informality within university’s perimeter. Brawijaya as one of the biggest and oldest University in Malang over time has boosted the development of several of its perimeter, provided several hotspots for students and youth. These rapid hotspots growth is related to the growth of informal practices. For cities that developed by its universities, it is necessary to understand both of the formal and informal practices within its perimeter. Through this study I would like to know the characteristic of informality within university perimeter, which formed by Brawijaya, UIN Maliki, and ITN; and to frame it within Carmona’s Urban Design Dimension. Mapping is utilized as a primary method to analyze both formal and informality within site. The formal aspect consists of formal activities, function and site user. While informality mapper consists of street vendors and street art. The research found that while urban informality within Brawijaya and UIN Maliki are related to the character and morphology, its formal structure has; its relation is reciprocal. The morphological, visual and functional dimension of university perimeter is driven by the social, perceptual and temporal dimension formed by its user and showed through informality.

Convex lattice polygons of fixed area with perimeter-dependent weights.

Science.gov (United States)

Rajesh, R; Dhar, Deepak

2005-01-01

We study fully convex polygons with a given area, and variable perimeter length on square and hexagonal lattices. We attach a weight tm to a convex polygon of perimeter m and show that the sum of weights of all polygons with a fixed area s varies as s(-theta(conv))eK(t)square root(s) for large s and t less than a critical threshold tc, where K(t) is a t-dependent constant, and theta(conv) is a critical exponent which does not change with t. Using heuristic arguments, we find that theta(conv) is 1/4 for the square lattice, but -1/4 for the hexagonal lattice. The reason for this unexpected nonuniversality of theta(conv) is traced to existence of sharp corners in the asymptotic shape of these polygons.

Developmental Dyscalculia and Automatic Magnitudes Processing: Investigating Interference Effects between Area and Perimeter

Directory of Open Access Journals (Sweden)

Hili Eidlin-Levy

2017-12-01

Full Text Available The relationship between numbers and other magnitudes has been extensively investigated in the scientific literature. Here, the objectives were to examine whether two continuous magnitudes, area and perimeter, are automatically processed and whether adults with developmental dyscalculia (DD are deficient in their ability to automatically process one or both of these magnitudes. Fifty-seven students (30 with DD and 27 with typical development performed a novel Stroop-like task requiring estimation of one aspect (area or perimeter while ignoring the other. In order to track possible changes in automaticity due to practice, we measured performance after initial and continuous exposure to stimuli. Similar to previous findings, current results show a significant group × congruency interaction, evident beyond exposure level or magnitude type. That is, the DD group systematically showed larger Stroop effects. However, analysis of each exposure period showed that during initial exposure to stimuli the DD group showed larger Stroop effects in the perimeter and not in the area task. In contrast, during continuous exposure to stimuli no triple interaction was evident. It is concluded that both magnitudes are automatically processed. Nevertheless, individuals with DD are deficient in inhibiting irrelevant magnitude information in general and, specifically, struggle to inhibit salient area information after initial exposure to a perimeter comparison task. Accordingly, the findings support the assumption that DD involves a deficiency in multiple cognitive components, which include domain-specific and domain-general cognitive functions.

Developmental Dyscalculia and Automatic Magnitudes Processing: Investigating Interference Effects between Area and Perimeter.

Science.gov (United States)

Eidlin-Levy, Hili; Rubinsten, Orly

2017-01-01

The relationship between numbers and other magnitudes has been extensively investigated in the scientific literature. Here, the objectives were to examine whether two continuous magnitudes, area and perimeter, are automatically processed and whether adults with developmental dyscalculia (DD) are deficient in their ability to automatically process one or both of these magnitudes. Fifty-seven students (30 with DD and 27 with typical development) performed a novel Stroop-like task requiring estimation of one aspect (area or perimeter) while ignoring the other. In order to track possible changes in automaticity due to practice, we measured performance after initial and continuous exposure to stimuli. Similar to previous findings, current results show a significant group × congruency interaction, evident beyond exposure level or magnitude type. That is, the DD group systematically showed larger Stroop effects. However, analysis of each exposure period showed that during initial exposure to stimuli the DD group showed larger Stroop effects in the perimeter and not in the area task. In contrast, during continuous exposure to stimuli no triple interaction was evident. It is concluded that both magnitudes are automatically processed. Nevertheless, individuals with DD are deficient in inhibiting irrelevant magnitude information in general and, specifically, struggle to inhibit salient area information after initial exposure to a perimeter comparison task. Accordingly, the findings support the assumption that DD involves a deficiency in multiple cognitive components, which include domain-specific and domain-general cognitive functions.

Ukraine-Japanese-Swedish project: Upgrading of perimeter protection system at Kharkov Institute of Physics and Technology (KIPT)

International Nuclear Information System (INIS)

Mikahaylov, V.; Lapshin, V.; Ek, P.; Flyghed, L.; Nilsson, A.; Ooka, N.; Shimizu, K.; Tanuma, K.

2001-01-01

Full text: Since the Ukraine voluntarily accepted the status of a non-nuclear-weapons state and concluded a Safeguards Agreement with the IAEA, the Kharkov Institute of Physics and Technology (KIPT) as a nuclear facility using the nuclear material of category 1, has become a Ukrainian priority object for the international community's efforts to ensure nuclear non-proliferation measures and to bring the existing protection systems to the generally accepted security standards. In March 1996, at the meeting held under the auspices of the IAEA in Kiev, the representatives from Japan, Sweden and the USA agreed to provide technical assistance concerning improvement of the nuclear material accountancy and control and physical protection system (MPC and A) available at KIPT. The Technical Secretariat of the Japan-Ukraine Committee for Co-operation on Reducing Nuclear Weapons and Swedish Nuclear Power Inspectorate undertook to solve the most expensive and labour-consuming task namely, the upgrading of the perimeter protection system at KIPT. This included that the current perimeter system, comprising several kilometers, should be completely replaced. Besides the above-mentioned problem, the upgrading should be carried out with the institute in operation. Thus, it was not allowed to replace the existing protection system by a new one unless KIPT was constantly protected. This required the creation of a new protected zone that to a large extent was occupied by the communication equipment, buildings, trees and other objects interfering with the work. All these difficulties required very comprehensive development of the project design as well as a great deal of flexibility during the implementation of the project. These problems were all successfully resolved thanks to a well working project organization, composed of experts from KIPT, JAERI and ANS, involving the highly qualified Swedish technical experts who played a leading role. In the framework of implementation of the

Design and evaluation of the ReKon : an integrated detection and assessment perimeter system.

Energy Technology Data Exchange (ETDEWEB)

Dabling, Jeffrey Glenn; Andersen, Jason Jann; McLaughlin, James O. [Stonewater Control Systems, Inc., Kannapolis, NC

2013-02-01

Kontek Industries (Kannapolis, NC) and their subsidiary, Stonewater Control Systems (Kannapolis, NC), have entered into a cooperative research and development agreement with Sandia to jointly develop and evaluate an integrated perimeter security system solution, one that couples access delay with detection and assessment. This novel perimeter solution was designed to be configurable for use at facilities ranging from high-security military sites to commercial power plants, to petro/chemical facilities of various kinds. A prototype section of the perimeter has been produced and installed at the Sandia Test and Evaluation Center in Albuquerque, NM. This prototype system integrated fiber optic break sensors, active infrared sensors, fence disturbance sensors, video motion detection, and ground sensors. This report documents the design, testing, and performance evaluation of the developed ReKon system. The ability of the system to properly detect pedestrian or vehicle attempts to bypass, breach, or otherwise defeat the system is characterized, as well as the Nuisance Alarm Rate.

Area G perimeter surface-soil and single-stage water sampling: Environmental surveillance for fiscal year 94, Group ESH-19. Progress report

International Nuclear Information System (INIS)

Conrad, R.; Childs, M.; Lyons, C.R.; Coriz, F.

1996-08-01

ESH-19 personnel collected soil and single-stage water samples around the perimeter of Area G at Los Alamos National Laboratory during FY94 to characterize possible contaminant movement out of Area G through surface-water and sediment runoff. These samples were analyzed for tritium, total uranium, isotopic plutonium, americium-241, and cesium-137. Ten metals were also analyzed on selected soils using analytical laboratory techniques. All radiochemical data are compared with analogous samples collected during FY 93 and reported in LA-12986. Baseline concentrations for future disposal operations were established for metals and radionuclides by a sampling program in the proposed Area G Expansion Area. Considering the amount of radioactive waste that has been disposed at Area G, there is evidence of only low concentrations of radionuclides on perimeter surface soils. Consequently, little radioactivity is leaving the confines of Area G via the surface water runoff pathway

Top scientists join Stephen Hawking at Perimeter Institute

Science.gov (United States)

Banks, Michael

2009-03-01

Nine leading researchers are to join Stephen Hawking as visiting fellows at the Perimeter Institute for Theoretical Physics in Ontario, Canada. The researchers, who include string theorists Leonard Susskind from Stanford University and Asoka Sen from the Harisch-Chandra Research Institute in India, will each spend a few months of the year at the institute as "distinguished research chairs". They will be joined by another 30 scientists to be announced at a later date.

Asymptotics of the $s$-perimeter as $s\\searrow 0$

OpenAIRE

Dipierro, Serena; Figalli, Alessio; Palatucci, Giampiero; Valdinoci, Enrico

2012-01-01

We deal with the asymptotic behavior of the $s$-perimeter of a set $E$ inside a domain $\\Omega$ as $s\\searrow0$. We prove necessary and sufficient conditions for the existence of such limit, by also providing an explicit formulation in terms of the Lebesgue measure of $E$ and $\\Omega$. Moreover, we construct examples of sets for which the limit does not exist.

Refined universal laws for hull volumes and perimeters in large planar maps

International Nuclear Information System (INIS)

Guitter, Emmanuel

2017-01-01

We consider ensembles of planar maps with two marked vertices at distance k from each other, and look at the closed line separating these vertices and lying at distance d from the first one ( d   <   k ). This line divides the map into two components, the hull at distance d which corresponds to the part of the map lying on the same side as the first vertex and its complementary. The number of faces within the hull is called the hull volume, and the length of the separating line the hull perimeter. We study the statistics of the hull volume and perimeter for arbitrary d and k in the limit of infinitely large planar quadrangulations, triangulations and Eulerian triangulations. We consider more precisely situations where both d and k become large with the ratio d / k remaining finite. For infinitely large maps, two regimes may be encountered: either the hull has a finite volume and its complementary is infinitely large, or the hull itself has an infinite volume and its complementary is of finite size. We compute the probability for the map to be in either regime as a function of d / k as well as a number of universal statistical laws for the hull perimeter and volume when maps are conditioned to be in one regime or the other. (paper)

Design of complex bone internal structure using topology optimization with perimeter control.

Science.gov (United States)

Park, Jaejong; Sutradhar, Alok; Shah, Jami J; Paulino, Glaucio H

2018-03-01

Large facial bone loss usually requires patient-specific bone implants to restore the structural integrity and functionality that also affects the appearance of each patient. Titanium alloys (e.g., Ti-6Al-4V) are typically used in the interfacial porous coatings between the implant and the surrounding bone to promote stability. There exists a property mismatch between the two that in general leads to complications such as stress-shielding. This biomechanical discrepancy is a hurdle in the design of bone replacements. To alleviate the mismatch, the internal structure of the bone replacements should match that of the bone. Topology optimization has proven to be a good technique for designing bone replacements. However, the complex internal structure of the bone is difficult to mimic using conventional topology optimization methods without additional restrictions. In this work, the complex bone internal structure is recovered using a perimeter control based topology optimization approach. By restricting the solution space by means of the perimeter, the intricate design complexity of bones can be achieved. Three different bone regions with well-known physiological loadings are selected to illustrate the method. Additionally, we found that the target perimeter value and the pattern of the initial distribution play a vital role in obtaining the natural curvatures in the bone internal structures as well as avoiding excessive island patterns. Copyright © 2018 Elsevier Ltd. All rights reserved.

Clock Drawing in Spatial Neglect: A Comprehensive Analysis of Clock Perimeter, Placement, and Accuracy

Science.gov (United States)

Chen, Peii; Goedert, Kelly M.

2012-01-01

Clock drawings produced by right-brain-damaged (RBD) individuals with spatial neglect often contain an abundance of empty space on the left while numbers and hands are placed on the right. However, the clock perimeter is rarely compromised in neglect patients’ drawings. By analyzing clock drawings produced by 71 RBD and 40 healthy adults, this study investigated whether the geometric characteristics of the clock perimeter reveal novel insights to understanding spatial neglect. Neglect participants drew smaller clocks than either healthy or non-neglect RBD participants. While healthy participants’ clock perimeter was close to circular, RBD participants drew radially extended ellipses. The mechanisms for these phenomena were investigated by examining the relation between clock-drawing characteristics and performance on six subtests of the Behavioral Inattention Test (BIT). The findings indicated that the clock shape was independent of any BIT subtest or the drawing placement on the test sheet and that the clock size was significantly predicted by one BIT subtest: the poorer the figure and shape copying, the smaller the clock perimeter. Further analyses revealed that in all participants, clocks decreased in size as they were placed farther from the center of the paper. However, even when neglect participants placed their clocks towards the center of the page, they were smaller than those produced by healthy or non-neglect RBD participants. These results suggest a neglect-specific reduction in the subjectively available workspace for graphic production from memory, consistent with the hypothesis that neglect patients are impaired in the ability to enlarge the attentional aperture. PMID:22390278

Farmers’ willingness to pay for surface water in the West Mitidja irrigated perimeter, northern Algeria

International Nuclear Information System (INIS)

Azzi, M.; Calatrava, J.; Bedrani, S.

2018-01-01

Algeria is among the most water-stressed countries in the world. Because of its climatic conditions, irrigation is essential for agricultural production. Water prices paid by farmers in public irrigation districts are very low and do not cover the operation and maintenance (O&M) costs of the irrigated perimeters, thus leading to the deterioration of these infrastructures. The objective of this paper is to analyse whether farmer’s in the West Mitidja irrigation district in northern Algeria would be willing to pay more for surface water in order to maintain the water supply service in its current conditions. We estimated farmers’ willingness to pay (WTP) for water using data from a dichotomous choice contingent valuation survey to 112 randomly selected farmers. Farmers’ responses were modelled using logistic regression techniques. We also analysed which technical, structural, social and economic characteristics of farms and farmers explain the differences in WTP. Our results showed that nearly 80% of the surveyed farmers are willing to pay an extra price for irrigation water. The average WTP was 64% greater than the price currently paid by farmers, suggesting some scope for improving the financial resources of the Mitidja irrigated perimeter, but insufficient to cover all O&M costs. Some of the key identified factors that affect WTP for surface water relate to farm ownership, access to groundwater resources, cropping patterns, farmers’ agricultural training and risk exposure.

Towards Rural Land Use: Challenges for Oversizing Urban Perimeters in Shrinking Towns

Science.gov (United States)

Sá, João; Virtudes, Ana

2017-12-01

This article, based on the literature review, aims to study the challenges of the urban dispersion and oversizing of urban perimeters, in the cases where the towns are shrinking or spreading to the rural land-use. It is focused on the case of Portugal where during the last decades there was an escaping to the big cities alongside to the sea (Atlantic and Mediterranean) shore. In the Interior part of the country, which means near to the border with Spain, several towns are shrinking, despite their huge urban perimeters, proposed by the municipal master plans, since the middle of the nineties. Consequently, these urban perimeters are nowadays oversizing, with empty buildings and non-urbanized areas. At the same time, the social patterns of occupation of this territory have changed significantly, moving from a society with signs of rurality to an urban realm, understood not only in territorial terms but also regarding the current lifestyle. This deep changing has occurred not only in urbanistic terms but also in the economic, cultural and social organizations of the country, under a movement that corresponds to a decline of the small urban settlements in rural areas, far away from the cosmopolitan strip of land nearby the sea, in between the capital city, Lisbon and the second one Oporto. These transformations were not driven by any significant public policy for land-use actions. On the contrary, the production of urban areas, supporting the new model of economic and social development was largely left to the initiative of economic and social private agents and land owners. These agents were the leading responsible for the new urban developments and housing. In this sense, this research aims to present some strategies for the short time period regarding the devolution of urban areas to rural land use. In this sense, the next steps of spatial planning policies, under the role of local authorities (the 308 municipalities including Madeira and Azores islands, plus the

Experimental study of abdominal CT scanning exposal doses adjusted on the basis of pediatric abdominal perimeter

International Nuclear Information System (INIS)

Wei Wenzhou; Zhu Gongsheng; Zeng Lingyan; Yin Xianglin; Yang Fuwen; Liu Changsheng

2006-01-01

Objective: To optimize the abdominal helical CT scanning parameters in pediatric patients and to reduce its radiation hazards. Methods: 60 canines were evenly grouped into 4 groups on the basis of pediatric abdominal perimeter, scanned with 110,150,190 and 240 mAs, and their qualities of canine CT images were analyzed. 120 pediafric patients with clinic suspected abdominal diseases were divided into 4 groups on the basis of abdominal perimeter, scanned by optimal parameters and their image qualities were analyzed. Results: After CT exposure were reduced, the percentages of total A and B were 90.9 % and 92.0 % in experimental canines and in pediatric patients, respectively. Compared with conventional CT scanning, the exposure and single slice CT dose index weighted (CTDIw) were reduced to 45.8%-79.17%. Conclusion: By adjusted the pediatric helical CT parameters basedon the of pediatric abdominal perimeter, exposure of patient to the hazards of radiation is reduced. (authors)

Final Environmental Assessment Airfield Storm Drainage System Repair Joint Base Andrews-Naval Air Facility Washington, MD

Science.gov (United States)

2015-06-01

the airfield. • Phase 1–September 2015 to October 2016: Replace or rehabilitate storm drain pipes between the West Runway and Taxiway Whiskey...activities, landfills , and other support and training operations have affected groundwater and surface waters at JBA with metals, volatile organic...the airfield.  Phase 1: September 2015 to October 2016: Replace or rehabilitate storm drain pipes between the West Runway and Taxiway Whiskey

Miniscrew-assisted rapid palatal expansion for managing arch perimeter in an adult patient

Directory of Open Access Journals (Sweden)

Amanda Carneiro da Cunha

Full Text Available ABSTRACT Introduction: Etiology of dental crowding may be related to arch constriction in diverse dimensions, and an appropriate manipulation of arch perimeter by intervening in basal bone discrepancies cases, may be a key for crowding relief, especially when incisors movement is limited due to underlying pathology, periodontal issues or restrictions related to soft tissue profile. Objectives: This case report illustrates a 24-year old woman, with maxillary transverse deficiency, upper and lower arches crowding, Class II, division 1, subdivision right relationship, previous upper incisors traumatic episode and straight profile. A non-surgical and non-extraction treatment approach was feasible due to the miniscrew-assisted rapid palatal expansion technique (MARPE. Methods: The MARPE appliance consisted of a conventional Hyrax expander supported by four orthodontic miniscrews. A slow expansion protocol was adopted, with an overall of 40 days of activation and a 3-month retention period. Intrusive traction miniscrew-anchored mechanics were used for correcting the Class II subdivision relationship, managing lower arch perimeter and midline deviation before including the upper central incisors. Results: Post-treatment records show an intermolar width increase of 5 mm, bilateral Class I molar and canine relationships, upper and lower crowding resolution, coincident dental midlines and proper intercuspation. Conclusions: The MARPE is an effective treatment approach for managing arch-perimeter deficiencies related to maxillary transverse discrepancies in adult patients.

Farmers’ willingness to pay for surface water in the West Mitidja irrigated perimeter, northern Algeria

Directory of Open Access Journals (Sweden)

Malika Azzi

2018-04-01

Full Text Available Algeria is among the most water-stressed countries in the world. Because of its climatic conditions, irrigation is essential for agricultural production. Water prices paid by farmers in public irrigation districts are very low and do not cover the operation and maintenance (O&M costs of the irrigated perimeters, thus leading to the deterioration of these infrastructures. The objective of this paper is to analyse whether farmer’s in the West Mitidja irrigation district in northern Algeria would be willing to pay more for surface water in order to maintain the water supply service in its current conditions. We estimated farmers’ willingness to pay (WTP for water using data from a dichotomous choice contingent valuation survey to 112 randomly selected farmers. Farmers’ responses were modelled using logistic regression techniques. We also analysed which technical, structural, social and economic characteristics of farms and farmers explain the differences in WTP. Our results showed that nearly 80% of the surveyed farmers are willing to pay an extra price for irrigation water. The average WTP was 64% greater than the price currently paid by farmers, suggesting some scope for improving the financial resources of the Mitidja irrigated perimeter, but insufficient to cover all O&M costs. Some of the key identified factors that affect WTP for surface water relate to farm ownership, access to groundwater resources, cropping patterns, farmers’ agricultural training and risk exposure.

Hardware implementation of adaptive filtering using charge-coupled devices. [For perimeter security sensors

Energy Technology Data Exchange (ETDEWEB)

Donohoe, G.W.

1977-01-01

Sandia Laboratories' Digital Systems Division/1734, as part of its work on the Base and Installation Security Systems (BISS) program has been making use of adaptive digital filters to improve the signal-to-noise ratio of perimeter sensor signals. In particular, the Widrow-Hoff least-mean-squares algorithm has been used extensively. This non-recursive linear predictor has been successful in extracting aperiodic signals from periodic noise. The adaptive filter generates a predictor signal which is subtracted from the input signal to produce an error signal. The value of this error is fed back to the filter to improve the quality of the next prediction. Implementation of the Widrow adaptive filter using a Charge-Coupled Device tapped analog delay line, analog voltage multipliers and operational amplifiers is described. The resulting filter adapts to signals with frequency components as high as several megahertz.

Examining perimeter gating control of urban traffic networkswith locally adaptive traffic signals

NARCIS (Netherlands)

Keyvan Ekbatani, M.; Gao, X.; Gayah, V.V.; Knoop, V.L.

2015-01-01

Traditionally, urban traffic is controlled by traffic lights. Recent findings of the Macroscopic or Network Fundamental Diagram (MFD or NFD) have led to the development of novel traffic control strategies that can be applied at a networkwide level. One pertinent example is perimeter flow control

Differential GPS effectiveness in measuring area and perimeter in forested settings

International Nuclear Information System (INIS)

Frank, Jereme; Wing, Michael G

2013-01-01

This study quantifies area and perimeter measurement errors, traverse times, recording intervals, and overall time and cost effectiveness for using a mapping-grade differential Global Positioning System (GPS) receiver in forested settings. We compared two configurations including one that maximized data collection productivity (position dilution of precision (PDOP) 20, signal to noise ratio (SNR 33), and minimum elevation mask 5°) and a second that involved traditional receiver settings that was designed to improve accuracies (PDOP 6, SNR 39, and minimum elevation mask 15°). We determined that averaging 30 positions and using the settings that maximized productivity was the most time effective combination of recording interval and settings. This combination of recording interval and settings proved slightly more cost effective than other traditional surveying methods such as a laser with digital compass and string box. Average absolute per cent area errors when averaging 30 positions and using maximum settings were 2.6% and average absolute per cent perimeter errors were 2.0%. These results should help forest resource professionals more effectively evaluate GPS techniques and receiver configurations. (paper)

Mapping crop based on phenological characteristics using time-series NDVI of operational land imager data in Tadla irrigated perimeter, Morocco

Science.gov (United States)

Ouzemou, Jamal-eddine; El Harti, Abderrazak; EL Moujahid, Ali; Bouch, Naima; El Ouazzani, Rabii; Lhissou, Rachid; Bachaoui, El Mostafa

2015-10-01

Morocco is a primarily arid to semi-arid country. These climatic conditions make irrigation an imperative and inevitable technique. Especially, agriculture has a paramount importance for the national economy. Retrieving of crops and their location as well as their spatial extent is useful information for agricultural planning and better management of irrigation water resource. Remote sensing technology was often used in management and agricultural research. Indeed, it's allows crops extraction and mapping based on phenological characteristics, as well as yield estimation. The study area of this work is the Tadla irrigated perimeter which is characterized by heterogeneous areas and extremely small size fields. Our principal objectives are: (1) the delimitation of the major crops for a good water management, (2) the insulation of sugar beet parcels for modeling its yields. To achieve the traced goals, we have used Landsat-8 OLI (Operational Land Imager) data pan-sharpened to 15 m. Spectral Angle Mapper (SAM) and Support Vector Machine (SVM) classifications were applied to the Normalized Difference Vegetation Index (NDVI) time-series of 10 periods. Classifications were calculated for a site of more than 124000 ha. This site was divided into two parts: the first part for selecting, training datasets and the second one for validating the classification results. The SVM and SAM methods classified the principal crops with overall accuracies of 85.27% and 57.17% respectively, and kappa coefficient of 80% and 43% respectively. The study showed the potential of using time-series OLI NDVI data for mapping different crops in irrigated, heterogeneous and undersized parcels in arid and semi-arid environment.

Swivel arm perimeter for visual field testing in different body positions.

Science.gov (United States)

Flammer, J; Hendrickson, P; Lietz, A; Stümpfig, D

1993-01-01

To investigate the influence of body position on visual field results, a 'swivel arm perimeter' was built, based on a modified Octopus 1-2-3. Here, the measuring unit was detected from the control unit and mounted on a swivel arm, allowing its movement in all directions. The first results obtained with this device have indicated that its development was worthwhile.

Perimeter generating functions for the mean-squared radius of gyration of convex polygons

International Nuclear Information System (INIS)

Jensen, Iwan

2005-01-01

We have derived long series expansions for the perimeter generating functions of the radius of gyration of various polygons with a convexity constraint. Using the series we numerically find simple (algebraic) exact solutions for the generating functions. In all cases the size exponent ν 1. (letter to the editor)

78 FR 57211 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2013-09-17

... removal equipment. Emergency radio system upgrade. PFC administrative fees. Decision Date: November 1... Use: Taxiway A pavement analysis and soil test. Taxiway A pavement rehabilitation. Runway 17/35 rehabilitation design. Taxiway/apron/fuel road pavement replacement. Taxiway/apron/fuel road pavement replacement...

78 FR 57213 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2013-09-17

... extension north--construction/tunnel construction. Electrical vault. Taxiway H construction. Storm water update. Gulfstream Road/tunnel design. Airfield electrical vault design. Taxiway A design. Taxiway H.... Runway 15R/33L flight kitchen demolition. Runway 15L/33R runway safety area improvements. Future taxiway...

Evaluation of high-perimeter electrode designs for deep brain stimulation

Science.gov (United States)

Howell, Bryan; Grill, Warren M.

2014-08-01

Objective. Deep brain stimulation (DBS) is an effective treatment for movement disorders and a promising therapy for treating epilepsy and psychiatric disorders. Despite its clinical success, complications including infections and mis-programing following surgical replacement of the battery-powered implantable pulse generator adversely impact the safety profile of this therapy. We sought to decrease power consumption and extend battery life by modifying the electrode geometry to increase stimulation efficiency. The specific goal of this study was to determine whether electrode contact perimeter or area had a greater effect on increasing stimulation efficiency. Approach. Finite-element method (FEM) models of eight prototype electrode designs were used to calculate the electrode access resistance, and the FEM models were coupled with cable models of passing axons to quantify stimulation efficiency. We also measured in vitro the electrical properties of the prototype electrode designs and measured in vivo the stimulation efficiency following acute implantation in anesthetized cats. Main results. Area had a greater effect than perimeter on altering the electrode access resistance; electrode (access or dynamic) resistance alone did not predict stimulation efficiency because efficiency was dependent on the shape of the potential distribution in the tissue; and, quantitative assessment of stimulation efficiency required consideration of the effects of the electrode-tissue interface impedance. Significance. These results advance understanding of the features of electrode geometry that are important for designing the next generation of efficient DBS electrodes.

Design and testing of a perimeter of increment threshold by projection

OpenAIRE

García Domene, María del Carmen; Luque Cobija, María José; Fez Saiz, Dolores de

2017-01-01

In the present study, we have designed and tested a perimeter for the detection of damage in the chromatic mechanisms using a video projector. To this purpose, we have characterized pixel to pixel a video projector, to account for the inhomogeneities in the projection. We have measured the tristimulus values of the projector primaries as a function of digital level, at 49 locations of the projection screen and, from them, we have arrived to a characterization model which reduces the color dif...

[Irrigated perimeters as a geopolitical strategy for the development of the semi-arid region and its implications for health, labor and the environment].

Science.gov (United States)

Pontes, Andrezza Graziella Veríssimo; Gadelha, Diego; Freitas, Bernadete Maria Coêlho; Rigotto, Raquel Maria; Ferreira, Marcelo José Monteiro

2013-11-01

An analysis was made of irrigated perimeters as a geopolitical strategy for expanding Brazilian agricultural frontiers and the "development" of the northeastern semi-arid region with respect to social determinants in health in rural communities. Research was conducted in the Chapada do Apodi in the states of Ceará and Rio Grande do Norte between 2007 and 2011. Various research techniques and tools were adopted, such as research-action, ethnographic studies, questionnaires and laboratory exams, water contamination analyses, social cartography and focal groups. In the context of agribusiness expansion, it was revealed that public policies of irrigation have had consequences for health, labor and the environment with the implementation of the Jaguaribe-Apodi Irrigated Perimeter in Ceará. The social and environmental conflict and resistance in the phase prior to the installation of the Santa Cruz do Apodi Irrigated Perimeter in Rio Grande do Norte was significant as it had consequences for the health-disease process on rural communities. It is important for the evaluation of public irrigation policies to consider the impacts of the perimeters on the lifestyle, labor, health and the environment of the affected territories.

Physiological intracellular crowdedness is defined by perimeter to area ratio of subcellular compartments

Directory of Open Access Journals (Sweden)

Noriko eHiroi

2012-07-01

Full Text Available The intracellular environment is known to be a crowded and inhomogeneous space. Such an in vivo environment differs from a well-diluted, homogeneous environment for biochemical reactions. However, the effects of both crowdedness and the inhomogeneity of environment on the behavior of a mobile particle have not yet been investigated sufficiently. As described in this paper, we constructed artificial reaction spaces with fractal models, which are assumed to be non-reactive solid obstacles in a reaction space with crevices that function as operating ranges for mobile particles threading the space. Because of the homogeneity of the structures of artificial reaction spaces, the models succeeded in reproducing the physiological fractal dimension of solid structures with a smaller number of non-reactive obstacles than in the physiological condition. This incomplete compatibility was mitigated when we chose a suitable condition of a perimeter-to-area ratio of the operating range to our model. Our results also show that a simulation space is partitioned into convenient reaction compartments as an in vivo environment with the exact amount of solid structures estimated from TEM images. The characteristics of these compartments engender larger mean square displacement of a mobile particle than that of particles in smaller compartments. Subsequently, the particles start to show confined particle-like behavior. These results are compatible with our previously presented results, which predicted that a physiological environment would produce quick-response and slow-exhaustion reactions.

Analysis Of The Socioeconomic And Environmental Impacts Of Irrigated Agriculture In The Irrigated Perimeter Of Pau Dos Ferros (Rn

Directory of Open Access Journals (Sweden)

José Jobson Garcia de Almeida

2014-07-01

Full Text Available The Brazilian Government implemented irrigated perimeters to ameliorate problems of drought and poverty in the Northeast. In this sense, the objective of this work was to analyze the social, economic and environmental impacts generated by the practice of irrigated agriculture in the municipality of Pau dos Ferros-RN, resulting from the impacts caused by the activity. Obtained references on the topic, on-site visits and interviews with producers of the perimeter. It was observed the presence of negative impacts in the area, such as waste, contamination and water salinisation, compaction and soil erosion, deforestation caused by the removal of the native vegetation, high consumption of energy and public health problems.

Trainer module for security control center operations

International Nuclear Information System (INIS)

Bernard, E.A.

1982-01-01

An operator trainer module has been developed to be used with the security control center equipment to be installed as part of a safeguards physical protection system. The module is designed to provide improved training and testing capabilities for control center operators through the use of simulations for perimeter equipment operations. Operators, through the trainer module, can be challenged with a variety of realistic situations which require responsive action identical to that needed in an actual system. This permits a consistent evaluation and confirmation of operator capabilities prior to assignment as an operator and allows for periodic retesting to verify that adequate performance levels are maintained

Concept of Operations for the Next Generation Air Transportation System. Version 3.2

Science.gov (United States)

2011-01-01

Airside. Security Identification Display Area/Airport ( SIDA ) operations area, terminal perimeter, terminal airspace (security) • Landside. Terminal...Definition RTSS Remote Terminal Security Screening SAA Special Activity Airspace SIDA Security Identification Display Area SM Separation Management

Application Development: AN Interactive, Non-Technical Perspective of the Geology and Geomorphology of the Ouray Perimeter Tail, CO.

Science.gov (United States)

Allen, H. M.; Giardino, J. R.

2015-12-01

Each year people seek respite from their busy lifestyles by traveling to state or national parks, national forests or wilderness areas. The majority of these parks were established in order to help preserve our natural heritage, including wildlife, forests, and the beauty of landscapes formed from thousands of years of geologic/geomorphologic processes. Whilst being able to enjoy the tranquility of nature, tourists are being robbed of a more in-depth experience as a result of the lack of a geologic background. One such location that attracts a large number of summer tourists is the perimeter trail in Ouray, Colorado. Located in the Southwestern portion of Colorado, Ouray is situated in the beautiful San Juan Mountain range along the "Million Dollar Highway." The Perimeter trail is a six-mile trail loop that circles the city of Ouray. The city is a very popular place for summertime tourism because of its unparalleled scenery. Ouray is situated in an area that is riddled with textbook angular unconformities, metasedimentary, sedimentary, and volcanic rocks. In the study area, The San Juans have been beautifully sculpted by an array of major faulting events, glacial activity and volcanics. With the understanding that technology is ever expanding, we think there is no better way to experience the Perimeter Trail than to have an interactive application that will be both educational as well as interesting. This application is a non-technical way of looking at the geology and geomorphology of the perimeter trail. Additionally, a paper brochure shows the most noteworthy points of interest. The brochure contains a brief geologic history of the San Juan Mountains accompanied with annotated photographs to illustrate the complex geology/geomorphology encountered on the trail. The application is based on an interactive three-dimensional map, which can be zoomed to various scales. The app hosts a locational service that uses the phone's GPS to communicate location of the hiker

Testing the effects of perimeter fencing and elephant exclosures on lion predation patterns in a Kenyan wildlife conservancy.

Science.gov (United States)

Dupuis-Desormeaux, Marc; Davidson, Zeke; Pratt, Laura; Mwololo, Mary; MacDonald, Suzanne E

2016-01-01

The use of fences to segregate wildlife can change predator and prey behaviour. Predators can learn to incorporate fencing into their hunting strategies and prey can learn to avoid foraging near fences. A twelve-strand electric predator-proof fence surrounds our study site. There are also porous one-strand electric fences used to create exclosures where elephant (and giraffe) cannot enter in order to protect blocs of browse vegetation for two critically endangered species, the black rhinoceros (Diceros bicornis) and the Grevy's zebra (Equus grevyi). The denser vegetation in these exclosures attracts both browsing prey and ambush predators. In this study we examined if lion predation patterns differed near the perimeter fencing and inside the elephant exclosures by mapping the location of kills. We used a spatial analysis to compare the predation patterns near the perimeter fencing and inside the exclosures to predation in the rest of the conservancy. Predation was not over-represented near the perimeter fence but the pattern of predation near the fence suggests that fences may be a contributing factor to predation success. Overall, we found that predation was over-represented inside and within 50 m of the exclosures. However, by examining individual exclosures in greater detail using a hot spot analysis, we found that only a few exclosures contained lion predation hot spots. Although some exclosures provide good hunting grounds for lions, we concluded that exclosures did not necessarily create prey-traps per se and that managers could continue to use this type of exclusionary fencing to protect stands of dense vegetation.

Testing the effects of perimeter fencing and elephant exclosures on lion predation patterns in a Kenyan wildlife conservancy

Directory of Open Access Journals (Sweden)

Marc Dupuis-Desormeaux

2016-02-01

Full Text Available The use of fences to segregate wildlife can change predator and prey behaviour. Predators can learn to incorporate fencing into their hunting strategies and prey can learn to avoid foraging near fences. A twelve-strand electric predator-proof fence surrounds our study site. There are also porous one-strand electric fences used to create exclosures where elephant (and giraffe cannot enter in order to protect blocs of browse vegetation for two critically endangered species, the black rhinoceros (Diceros bicornis and the Grevy’s zebra (Equus grevyi. The denser vegetation in these exclosures attracts both browsing prey and ambush predators. In this study we examined if lion predation patterns differed near the perimeter fencing and inside the elephant exclosures by mapping the location of kills. We used a spatial analysis to compare the predation patterns near the perimeter fencing and inside the exclosures to predation in the rest of the conservancy. Predation was not over-represented near the perimeter fence but the pattern of predation near the fence suggests that fences may be a contributing factor to predation success. Overall, we found that predation was over-represented inside and within 50 m of the exclosures. However, by examining individual exclosures in greater detail using a hot spot analysis, we found that only a few exclosures contained lion predation hot spots. Although some exclosures provide good hunting grounds for lions, we concluded that exclosures did not necessarily create prey-traps per se and that managers could continue to use this type of exclusionary fencing to protect stands of dense vegetation.

Data fusion concept in multispectral system for perimeter protection of stationary and moving objects

Science.gov (United States)

Ciurapiński, Wieslaw; Dulski, Rafal; Kastek, Mariusz; Szustakowski, Mieczyslaw; Bieszczad, Grzegorz; Życzkowski, Marek; Trzaskawka, Piotr; Piszczek, Marek

2009-09-01

The paper presents the concept of multispectral protection system for perimeter protection for stationary and moving objects. The system consists of active ground radar, thermal and visible cameras. The radar allows the system to locate potential intruders and to control an observation area for system cameras. The multisensor construction of the system ensures significant improvement of detection probability of intruder and reduction of false alarms. A final decision from system is worked out using image data. The method of data fusion used in the system has been presented. The system is working under control of FLIR Nexus system. The Nexus offers complete technology and components to create network-based, high-end integrated systems for security and surveillance applications. Based on unique "plug and play" architecture, system provides unmatched flexibility and simplistic integration of sensors and devices in TCP/IP networks. Using a graphical user interface it is possible to control sensors and monitor streaming video and other data over the network, visualize the results of data fusion process and obtain detailed information about detected intruders over a digital map. System provides high-level applications and operator workload reduction with features such as sensor to sensor cueing from detection devices, automatic e-mail notification and alarm triggering.

Evaluating and optimizing resilience of airport pavement networks

DEFF Research Database (Denmark)

Faturechi, Reza; Levenberg, Eyal; Miller-Hooks, Elise

2014-01-01

levels taking into account operational, budgetary, time, space, and physical resource limitations. Details, such as aircraft size impacts, reductions in capacity due to joint takeoff and landing maneuvers on common runways or bidirectional flows on taxiways, potential for outsourcing repair work...

Preferential Hyperacuity Perimeter (PreView PHP) for detecting choroidal neovascularization study.

Science.gov (United States)

Alster, Yair; Bressler, Neil M; Bressler, Susan B; Brimacombe, Judith A; Crompton, R Michael; Duh, Yi-Jing; Gabel, Veit-Peter; Heier, Jeffrey S; Ip, Michael S; Loewenstein, Anat; Packo, Kirk H; Stur, Michael; Toaff, Techiya

2005-10-01

To assess the ability of the Preferential Hyperacuity Perimeter (PreView PHP; Carl Zeiss Meditec, Dublin, CA) to detect recent-onset choroidal neovascularization (CNV) resulting from age-related macular degeneration (AMD) and to differentiate it from an intermediate stage of AMD. Prospective, comparative, concurrent, nonrandomized, multicenter study. Eligible participants' study eyes had a corrected visual acuity of 20/160 or better and either untreated CNV from AMD diagnosed within the last 60 days or an intermediate stage of AMD. After obtaining consent, visual acuity with habitual correction, masked PHP testing, stereoscopic color fundus photography, and fluorescein angiography were performed. Photographs and angiograms were evaluated by graders masked to diagnosis and PHP results. The reading center's diagnosis determined if the patient was categorized as having intermediate AMD or neovascular AMD. A successful study outcome was defined a priori as a sensitivity of at least 80% and a specificity of at least 80%. Of 185 patients who gave consent to be enrolled, 11 (6%) had PHP results judged to be unreliable. An additional 52 were not included because they did not meet all eligibility criteria. Of the remaining 122 patients, 57 had an intermediate stage of AMD and 65 had neovascular AMD. The sensitivity to detect newly diagnosed CNV using PHP testing was 82% (95% confidence interval [CI], 70%-90%). The specificity to differentiate newly diagnosed CNV from the intermediate stage of AMD using PHP testing was 88% (95% CI, 76%-95%). Preferential Hyperacuity Perimeter testing can detect recent-onset CNV resulting from AMD and can differentiate it from an intermediate stage of AMD with high sensitivity and specificity. These data suggest that monitoring with PHP should detect most cases of CNV of recent onset with few false-positive results at a stage when treatment usually would be beneficial. Thus, this monitoring should be considered in the management of the

Rigorous derivation of the perimeter generating functions for the mean-squared radius of gyration of rectangular, Ferrers and pyramid polygons

International Nuclear Information System (INIS)

Lin, Keh Ying

2006-01-01

We have derived rigorously the perimeter generating functions for the mean-squared radius of gyration of rectangular, Ferrers and pyramid polygons. These functions were found by Jensen recently. His nonrigorous results are based on the analysis of the long series expansions. (comment)

The environmental impacts of land transformation in the coastal perimeter of the Mar Menor lagoon (Spain)

OpenAIRE

GARCÍA-AYLLON VEINTIMILLA, SALVADOR; Miralles García, José Luis

2014-01-01

Assigned to WIT Press all rights under copyright that may exist in and to the Work and any associated written or multimedia components or other enhancements accompanying the Work. The distinctive environment of the lagoon has long been attractive for visitors. A surge in touristic activities has taken place in the area since the early 1960s, characterised by intense urban development along the lagoon s perimeter to accommodate the growing seasonal population. This phenomenon has particular...

29 CFR Appendix F to Subpart R of... - Perimeter Columns: Non-Mandatory Guidelines for Complying With § 1926.756(e) To Protect the...

Science.gov (United States)

2010-07-01

... to Subpart R of Part 1926 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Steel Erection Pt. 1926, Subpt. R, App. F Appendix F to Subpart R of Part 1926—Perimeter Columns: Non...

77 FR 22376 - Airport Improvement Program (AIP) Grant Assurances

Science.gov (United States)

2012-04-13

... established after December 30, 1987, will be expended by it for the capital or operating costs of the airport... structures (such as runways, taxiways, aprons, terminal buildings, hangars, and roads), including all... the Airport and Airway Trust Fund. * * * * * Issued in Washington, DC on April 10, 2012. Benito De...

Comparison of perimeter trap crop varieties: effects on herbivory, pollination, and yield in butternut squash.

Science.gov (United States)

Adler, L S; Hazzard, R V

2009-02-01

Perimeter trap cropping (PTC) is a method of integrated pest management (IPM) in which the main crop is surrounded with a perimeter trap crop that is more attractive to pests. Blue Hubbard (Cucurbita maxima Duch.) is a highly effective trap crop for butternut squash (C. moschata Duch. ex Poir) attacked by striped cucumber beetles (Acalymma vittatum Fabricius), but its limited marketability may reduce adoption of PTC by growers. Research comparing border crop varieties is necessary to provide options for growers. Furthermore, pollinators are critical for cucurbit yield, and the effect of PTC on pollination to main crops is unknown. We examined the effect of five border treatments on herbivory, pollination, and yield in butternut squash and manipulated herbivory and pollination to compare their importance for main crop yield. Blue Hubbard, buttercup squash (C. maxima Duch.), and zucchini (C. pepo L.) were equally attractive to cucumber beetles. Border treatments did not affect butternut leaf damage, but butternut flowers had the fewest beetles when surrounded by Blue Hubbard or buttercup squash. Yield was highest in the Blue Hubbard and buttercup treatments, but this effect was not statistically significant. Native bees accounted for 87% of pollinator visits, and pollination did not limit yield. There was no evidence that border crops competed with the main crop for pollinators. Our results suggest that both buttercup squash and zucchini may be viable alternatives to Blue Hubbard as borders for the main crop of butternut squash. Thus, growers may have multiple border options that reduce pesticide use, effectively manage pests, and do not disturb mutualist interactions with pollinators.

System overview and applications of a panoramic imaging perimeter sensor

International Nuclear Information System (INIS)

Pritchard, D.A.

1995-01-01

This paper presents an overview of the design and potential applications of a 360-degree scanning, multi-spectral intrusion detection sensor. This moderate-resolution, true panoramic imaging sensor is intended for exterior use at ranges from 50 to 1,500 meters. This Advanced Exterior Sensor (AES) simultaneously uses three sensing technologies (infrared, visible, and radar) along with advanced data processing methods to provide low false-alarm intrusion detection, tracking, and immediate visual assessment. The images from the infrared and visible detector sets and the radar range data are updated as the sensors rotate once per second. The radar provides range data with one-meter resolution. This sensor has been designed for easy use and rapid deployment to cover wide areas beyond or in place of typical perimeters, and tactical applications around fixed or temporary high-value assets. AES prototypes are in development. Applications discussed in this paper include replacements, augmentations, or new installations at fixed sites where topological features, atmospheric conditions, environmental restrictions, ecological regulations, and archaeological features limit the use of conventional security components and systems

Area G perimeter surface-soil and single-stage water sampling: Environmental surveillance for fiscal year 1993

International Nuclear Information System (INIS)

Conrad, R.; Childs, M.; Rivera-Dirks, C.; Coriz, F.

1995-07-01

Area G, in Technical Area 54, has been the principle facility at Los Alamos National Laboratory for the storage and disposal of low-level and transuranic (TRU) radioactive wastes since 1957. The current environmental investigation consisted of ESH-19 personnel who collected soil and single-stage water samples around the perimeter of Area G to characterize possible contaminant movement through surface-water runoff. These samples were analyzed for tritium, total uranium, isotopic plutonium, americium-241 (soil only), and cesium 137. The metals, mercury, lead, and barium, were analyzed using x-ray fluorescence

Accomplishments under the Airport Improvement Program: Fiscal Year 1988

Science.gov (United States)

1988-01-01

WIND (PRIMARY) INDICATOR; SECURITY FENCING HOLBROOK 02 $22,766 CONDUCT MASTER PLAN UPDATE HOLBROOK MUNICIPAL (GENERAL AVIATION) KAYENTA 03 $1,238,484...CONSTRUCT RUNWAY, TAXIWAY, APRON AND KAYENTA ACCESS ROAD; INSTALL RUNWAY AND TAXIWAY (GENERAL AVIATION) LIGHTING SYSTEM, VISUAL APPROACH INDICATOR

The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 Catchments (Version 2.1) for the Conterminous United States: Wildland Fire Perimeters By Year 2000 - 2010

Data.gov (United States)

U.S. Environmental Protection Agency — This dataset represents the historical fire perimeters within individual local NHDPlusV2 catchments and upstream, contributing watersheds based on the GeoMAC...

Evaluating the Relation between Dominant and Non-Dominant Hand Perimeters and Handgrip Strength of Basketball, Volleyball, Badminton and Handball Athletes

Science.gov (United States)

Kaplan, Defne Öcal

2016-01-01

In this study, it's aimed to evaluate the relation between dominant and non-dominant hand perimeters and handgrip strength of basketball, volleyball, badminton and handball athletes. Totally 101 active athletes (49 females, 52 male), of the average age in female 20±1.42 years, in male 21±1.99 years, joined to this study. Height, body weight, BMI…

Accomplishments Under the Airport Improvement Program. Fiscal year 1987.

Science.gov (United States)

1987-01-01

PREPARATION); GRAND CANYON NATIONAL PARK ACQUIRE LAND FOR APPROACHES; INSTALL (PRIMARY) FENCING KAYENTA 02 $561,695 CONSTRUCT NEW RUNWAY, TAXIWAY AND...APRON KAYENTA (SITE PREPARATION) (GENERAL AVIATION) KINGMAN 04 $138,411 INSTALL RUNWAY LIGHTING, TAXIWAY MOHAVE COUNTY GUIDANCE SIGNS AND VISUAL APPROACH

75 FR 33376 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2010-06-11

... Firefighting Station. Runway 18r/34l Overlay/Rehabilitation. Pavement Management Plan. Security Enhancement... maintain runway 16/34 pavement. PFC administration. Repair and maintain runway 03/21 pavement. Repair and maintain taxiway A pavement. Repair and maintain taxiway B pavement. [[Page 33377

The role of fire severity, distance from fire perimeter and vegetation on post-fire recovery of small-mammal communities in chaparal

Science.gov (United States)

Jay Diffendorfer; Genie M. Fleming; Scott Tremor; Wayne Spencer; Jan L. Beyers

2012-01-01

Chaparral shrublands in southern California, US, exhibit significant biodiversity but are prone to large, intense wildfires. Debate exists regarding fuel reduction to prevent such fires in wildland areas, but the effects of these fires on fauna are not well understood. We studied whether fire severity and distance from unburned fire perimeter influenced recovery of the...

77 FR 7231 - Public Notice for Release of Aeronautical Property at New Castle Airport (ILG), New Castle, DE

Science.gov (United States)

2012-02-10

...), has proposed the extension of Taxiway ``H'' and the development of an approximate thirty-eight (38... and allow for the extension of Taxiway ``H'' and future development, 0.610 +/- acres of Old Churchman... for review, by appointment, at the Airport Manager's office: Stephen Williams, Airport Executive...

Prediction based Greedy Perimeter Stateless Routing Protocol for Vehicular Self-organizing Network

Science.gov (United States)

Wang, Chunlin; Fan, Quanrun; Chen, Xiaolin; Xu, Wanjin

2018-03-01

PGPSR (Prediction based Greedy Perimeter Stateless Routing) is based on and extended the GPSR protocol to adapt to the high speed mobility of the vehicle auto organization network (VANET) and the changes in the network topology. GPSR is used in the VANET network environment, the network loss rate and throughput are not ideal, even cannot work. Aiming at the problems of the GPSR, the proposed PGPSR routing protocol, it redefines the hello and query packet structure, in the structure of the new node speed and direction information, which received the next update before you can take advantage of its speed and direction to predict the position of node and new network topology, select the right the next hop routing and path. Secondly, the update of the outdated node information of the neighbor’s table is deleted in time. The simulation experiment shows the performance of PGPSR is better than that of GPSR.

The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 Catchments Riparian Buffer (Version 2.1) for the Conterminous United States: Wildland Fire Perimeters By Year 2000 - 2010

Data.gov (United States)

U.S. Environmental Protection Agency — This dataset represents the historical fire perimeters within individual local NHDPlusV2 catchments and upstream, contributing watersheds riparian buffers based on...

Forming Of Spherical Titanium Cups From Circular Blanks With Cutouts On The Perimeter

Directory of Open Access Journals (Sweden)

Lacki P.

2015-06-01

Full Text Available Despite substantial demand for drawn parts made of high-strength sheet metal (including titanium alloys observed in the modern industry, particularly automotive and aviation, their application remains insignificant. This results from the fact that such sheet metal shows poor plasticity and its cold-forming is almost impossible. Low drawability makes it impossible to obtain even such simple shapes as spherical cups. The authors of this study developed circular sheet-metal blanks with cutouts on their perimeter. The blanks allow for cold forming of spherical cups from Ti6Al4V titanium alloy sheet metal using conventional rigid tools. The cutouts proposed in the study affect plastic strain distribution, which in turn leads to an increase in forming depth by about 30%. The numerical analysis, performed using the PamStamp 2G System software based on finite element method, was verified experimentally.

Pushing the physics envelope Canada's new Perimeter Institute is planning to apply the risk-taking approach of venture capitalism to the pursuit of theoretical physics

CERN Multimedia

Spurgeon, D

2001-01-01

An highly successful business man has donated 100 million Canadian dollars to found the Perimeter Institue for Theoretical Physics. It is designed to attract young, innovative scientists to tackle some of the most difficult problems in physics such as quantum gravity and quantum information theory (1 page).

Avaliação do espaço adicional requerido no perímetro do arco inferior para o nivelamento da curva de Spee Assessment of the additional lower arch perimeter needed for leveling the curve of Spee

Directory of Open Access Journals (Sweden)

Marcio José da Silva Campos

2009-08-01

Full Text Available OBJETIVO: determinar o perímetro de arco adicional necessário para o nivelamento da curva de Spee através de uma técnica laboratorial em modelos de estudo. MÉTODOS: foram utilizados 70 modelos inferiores nos quais se mediu a profundidade da curva de Spee e o perímetro do arco (de segundo molar a segundo molar. Nos mesmos modelos, após a simulação do nivelamento da curva de Spee, o perímetro de arco foi novamente avaliado, mantendo sua forma e comprimento. RESULTADOS: foi confirmada a correlação entre a profundidade da curva de Spee e o perímetro de arco adicional, sendo deduzida a fórmula [Paa = 0,21 CSmax - 0,04]. CONCLUSÃO: a técnica proposta permitiu, através da avaliação do perímetro de arco com curva de Spee nivelada, a determinação do espaço disponível para o alinhamento dentário.AIM: To determine the additional arch perimeter needed for leveling the curve of Spee by means of a laboratory technique using dental casts. METHODS: Seventy lower dental models were used for measuring the depth of the curve of Spee and assessing the arch perimeter from second molar to second molar. In these dental casts, after simulation of leveling the curve of Spee, arch perimeter was reevaluated, after maintaining its form and length. RESULTS: The correlation between the depth of the curve of Spee and the additional arch perimeter was ratified, as can be shown by the formula [Paa = 0,21 CSmax - 0,04]. CONCLUSION: The proposed technique allowed, through the assessment of the arch perimeter with the leveled curve of Spee, the determination of the space available for tooth alignment.

The way of land use in the perimeter of town Podu Iloaiei.

Directory of Open Access Journals (Sweden)

Irina Elena TODAŞCĂ

2010-04-01

Full Text Available Podu Iloaiei is situated in the south part of Jijia Plain, in Bahlui hydrographic basin. The relief is predominantlysculptural, followed by the accumulation relief. There are quaternary and basarabian  sediments/deposits. The climate is temperate-continental with dryness nuances whichcontributed to the growth of forest steppe vegetation. The hidrography is represented by Bahlui river and its main tributary: Bahluet. Pedological layer is influenced by the particular factors and processes of pedogenesis of Podu Iloaiei. There are spread types ofsoil from the following soil classes:cernisols, fluvisols, protisols and anthrosols. Podu Iloaiei perimeter didn’t have a spectacular evolution concerning its target. Its use is predominantly agricultural(83%, no matter the period studied(before and after 1990 orits recently rural-urban administrative structure. We may speak, in this case, about the existence of an agricultural-town. Many lands of Podu Iloaiei research station were taken over after 1990, by local entrepreneurs who preserve the modern techniques of land use,inherited from it. More than that, it feels the pressure of Iasi city, which determined some lands to get real interest.

Full perimeter intersection criteria. Definitions and implementations in SR-Site

Energy Technology Data Exchange (ETDEWEB)

Munier, Raymond

2010-03-15

Large fractures intersecting canisters have potential to reactivate due to nearby earthquakes and thereby jeopardising the canister/buffer integrity. The use of full perimeter intersection (FPI) as a proxy for fracture size has been explored within SKB since late 2004. A methodology to use FPI as a deposition hole rejection criterion was first reported in and the concept has successively matured ever since. As a response to feedback obtained from various instances of our organisation and external reviewers, additional analyses and benchmarks were reported in 2007. An analytical solution to the canister/fracture intersection probability was introduced, which enabled us to benchmark various aspects of the FPI simulations. The methodology was first applied within the framework of SR-CAN to compute the number of potentially critical canister positions and soon after, based on preliminary DFN models, as one of many prerequisites for repository design. The methodology and simulation logic has evolved substantially ever since it was originally reported in 2006 and the present report is intended to entirely replace previous reports on this subject, to thereby provide the interested reader with an description of the modelling procedure, prerequisites and limitations. As a consequence thereof, major portions of previous reports are repeated herein, though we occasionally refer to these reports for comparative purposes. Furthermore, as the final versions of the site descriptive models have been reported we find it convenient to, within this report, also apply the methodology using the most actual site specific fracture data

AIRFIL: a FORTRAN program for reduction of data obtained from alpha spectrometry of perimeter air filters

International Nuclear Information System (INIS)

Hinton, E.R. Jr.; Howell, R.L.

1984-03-01

Isotopic alpha spectrometry of 238 U, 235 U, and 234 U, along with gross alpha/beta counting of perimeter air filters, is performed by the Oak Ridge Y-12 Plant Laboratory in support of the Envrirnomental Monitoring Section of the Radiation Safety Department. Weekly samples are gross alpha/beta counted and the isotopic analysis performed on quarterly composites. Calculations and data management represents a major portion of the anlaysis time when performed manually, even with a desktop calculator. In order to reduce calculation time, perform orderly data manipulation and management, reduce errors due to redundant calculations, and eliminate report typing turnaround time, a computer program (AIRFIL) has been developed that performs these functions. The program accepts data through user prompts, then calculates and prints intermediate and final data, including detection limits

Las Matematicas: Lenguaje Universal. Grados Intermedios, Nivel 5b: Medida Lineal, Perimetro y Area (Mathematics: A Universal Language. Intermediate Grades, Level 5b: Linear Measure, Perimeter and Area).

Science.gov (United States)

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

This is one of a series of student booklets designed for use in a bilingual mathematics program in grades 6-8. The general format is to present each page in both Spanish and English. The mathematical topics in this booklet include measurement, perimeter, and area. (MK)

Safeguards considerations for uranium enrichment facilities, as applied to gas centrifuge and gaseous diffusion facilities

International Nuclear Information System (INIS)

1979-03-01

The goals and objectives of IAEA safeguards as they are understood by the authors based on published documents are reviewed. These goals are then used to derive safeguards concerns, diversion strategies, and potential safeguards measures for four base cases, the production of highly enriched uranium (HEU) at a diffusion plant, the diversion of low enriched uranium (LEU) at a diffusion plant, the diversion of HEU at a gas centrifuge plant, and the diversion of LEU at a gas centrifuge plant. Tables of estimated capabilities are given for each case, under the assumption that the inspector would have access: to the cascade perimeter at or after the start of operations, to the cascade perimeter throughout construction and operation, to the cascade perimeter during operation plus a one-time access to the cascade itself, to the cascade during construction but only its perimeter during operation, or to the cascade itself during construction and operation

77 FR 61582 - Privacy Act of 1974; System of Records

Science.gov (United States)

2012-10-10

... with ``Air Force Legal Operations Agency, Commercial Law and Litigation Directorate, 1500 W. Perimeter... Address: Delete entry and replace with ``Air Force Legal Operations Agency, Commercial Law and Litigation..., Commercial Law and Litigation Directorate, 1500 W. Perimeter Rd., Ste. 1780, Joint Base Andrews, MD 20742...

Spatial and Temporal Patterns of Unburned Areas within Fire Perimeters in the Northwestern United States from 1984 to 2014

Science.gov (United States)

Meddens, A. J.; Kolden, C.; Lutz, J. A.; Abatzoglou, J. T.; Hudak, A. T.

2016-12-01

Recently, there has been concern about increasing extent and severity of wildfires across the globe given rapid climate change. Areas that do not burn within fire perimeters can act as fire refugia, providing (1) protection from the detrimental effects of the fire, (2) seed sources, and (3) post-fire habitat on the landscape. However, recent studies have mainly focused on the higher end of the burn severity spectrum whereas the lower end of the burn severity spectrum has been largely ignored. We developed a spatially explicit database for 2,200 fires across the inland northwestern USA, delineating unburned areas within fire perimeters from 1984 to 2014. We used 1,600 Landsat scenes with one or two scenes before and one or two scenes after the fires to capture the unburned proportion of the fire. Subsequently, we characterized the spatial and temporal patterns of unburned areas and related the unburned proportion to interannual climate variability. The overall classification accuracy detecting unburned locations was 89.2% using a 10-fold cross-validation classification tree approach in combination with 719 randomly located field plots. The unburned proportion ranged from 2% to 58% with an average of 19% for a select number of fires. We find that using both an immediate post-fire image and a one-year post fire image improves classification accuracy of unburned islands over using just a single post-fire image. The spatial characteristics of the unburned islands differ between forested and non-forested regions with a larger amount of unburned area within non-forest. In addition, we show trends of unburned proportion related primarily to concurrent climatic drought conditions across the entire region. This database is important for subsequent analyses of fire refugia prioritization, vegetation recovery studies, ecosystem resilience, and forest management to facilitate unburned islands through fuels breaks, prescribed burning, and fire suppression strategies.

Area G perimeter surface-soil and single-stage water sampling. Environmental surveillance for fiscal year 95. Progress report

International Nuclear Information System (INIS)

Childs, M.; Conrad, R.

1997-09-01

ESH-19 personnel collected soil and single-stage water samples around the perimeter of Area G at Los Alamos National Laboratory (LANL) during FY 95 to characterize possible radionuclide movement out of Area G through surface water and entrained sediment runoff. Soil samples were analyzed for tritium, total uranium, isotopic plutonium, americium-241, and cesium-137. The single-stage water samples were analyzed for tritium and plutonium isotopes. All radiochemical data was compared with analogous samples collected during FY 93 and 94 and reported in LA-12986 and LA-13165-PR. Six surface soils were also submitted for metal analyses. These data were included with similar data generated for soil samples collected during FY 94 and compared with metals in background samples collected at the Area G expansion area

Repeatability of Retinal Sensitivity Measurements Using a Medmont Dark-Adapted Chromatic Perimeter in Healthy and Age-Related Macular Degeneration Cases.

Science.gov (United States)

Tan, Rose S; Guymer, Robyn H; Luu, Chi D

2018-05-01

To determine the intrasession and intersession test-retest repeatability of retinal sensitivity measurements using a dark-adapted chromatic perimeter (DACP). For intrasession testing, retinal sensitivity within the central 24° for the 505-nm stimulus was measured after 20, 30, and 40 minutes of dark adaptation (DA) and for the 625-nm stimulus was measured after the first and second 505-nm tests. For intersession testing, retinal sensitivity for both stimuli was measured after 30 minutes of DA at baseline and 1 month. The point-wise sensitivity (PWS) difference and coefficient of repeatability (CoR) of each stimulus and group were determined. For intrasession testing, 10 age-related macular degeneration (AMD) and eight control subjects were recruited. The overall CoR for the 505-nm stimulus was 8.4 dB for control subjects and 9.1 dB for AMD cases, and for the 625-nm stimulus was 6.7 dB for control subjects and 9.5 dB for AMD cases. For intersession testing, seven AMD cases and 13 control subjects returned an overall CoR for the 505-nm stimulus of 8.2 dB for the control and 11.7 dB for the AMD group. For the 625-nm stimulus the CoR was 6.2 dB for the control group and 8.4 dB for the AMD group. Approximately 80% of all test points had a PWS difference of ±5 dB between the two intrasession or intersession measurements for both stimuli. The CoR for the DACP is larger than that reported for scotopic perimeters; however, the majority of test points had a PWS difference of ±5 dB between tests. The DACP offers an opportunity to measure static and dynamic rod function at multiple locations with an acceptable reproducibility level.

Constructibility Challenges for Perimeter Control Blasting and Slope Development in Shale and Other "Weak" Rocks

Science.gov (United States)

Scarpato, D. J.

2016-02-01

Slope construction in shale can present some interesting challenges for geotechnical design engineers and contractors alike. There are challenges that can be expected and designed for; however, all too frequently, such challenges manifest themselves as "surprises" in the field. Common constructibility challenges can include drill hole deviation during drilling for controlled blasting; and, excavation slope instability arising from inconsistent perimeter control drilling. Drill hole deviation results from the cumulative effects from both drilling mechanics and rock mass conditions. Once a hole has initiated the deviation trajectory, it is difficult to rectify drill steel position. Although such challenges are not necessarily unique to shale, they are often exacerbated by weak, weathered and transversely isotropic nature of bedrock conditions. All too often, the working assumption is that shale is "soft" and easily excavatable; however, this blanket assumption can prove to be costly. This paper is intended to provide design professionals and contractors with the practical considerations needed to avoid the "surprises" associated with drill hole deviation, and minimize the potential for costly claims.

High Speed Exit Taxiways.

Science.gov (United States)

1981-02-01

the runway with 1800 ft. radius and no specified runout distance, was developed circa 1958 and standardized in the 19609. A considerable nur, ber of...cornerinl) . Even wi th eaync);e wheel steering, the small fraction of total weight on thle nose whoel prevents tricycle airplaines from being very...would provide more runout but would require greater clearance travel distances at both Fnds. Z2 The results of reference (a) indicated that

Radionuclides, Heavy Metals, and Polychlorinated Biphenyls in Soils Collected Around the Perimeter of Low-Level Radioactive Waste Disposal Area G during 2006

International Nuclear Information System (INIS)

P. R. Fresquez

2007-01-01

Twenty-one soil surface samples were collected in March around the perimeter of Area G, the primary disposal facility for low-level radioactive solid waste at Los Alamos National Laboratory (LANL). Three more samples were collected in October around the northwest corner after elevated tritium levels were detected on an AIRNET station located north of pit 38 in May. Also, four soil samples were collected along a transect at various distances (48, 154, 244, and 282 m) from Area G, starting from the northeast corner and extending to the Pueblo de San Ildefonso fence line in a northeasterly direction (this is the main wind direction). Most samples were analyzed for radionuclides ( 3 H, 238 Pu, 239,240 Pu, 241 Am, 234 U, 235 U, and 238 U), inorganic elements (Al, Ba, Be, Ca, Cr, Co, Cu, Fe, Mg, Mn, Ni, K, Na, V, Hg, Zn, Sb, As, Cd, Pb, Se, Ag, and Tl) and polychlorinated biphenyl (PCB) concentrations. As in previous years, the highest levels of 3 H in soils (690 pCi/mL) were detected along the south portion of Area G near the 3 H shafts; whereas, the highest concentrations of 241 Am (1.2 pCi/g dry) and the Pu isotopes (1.9 pCi/g dry for 238 Pu and 5 pCi/g dry for 239,240 Pu) were detected along the northeastern portions near the transuranic waste pads. Concentrations of 3 H in three soil samples and 241 Am and Pu isotopes in one soil sample collected around the northwest corner in October increased over concentrations found in soils collected at the same locations earlier in the year. Almost all of the heavy metals, with the exception of Zn and Sb in one sample each, in soils around the perimeter of Area G were below regional statistical reference levels (mean plus three standard deviations) (RSRLs). Similarly, only one soil sample collected on the west side contained PCB concentrations--67 (micro)g/kg dry of aroclor-1254 and 94 (micro)g/kg dry of aroclor-1260. Radionuclide and inorganic element concentrations in soils collected along a transect from Area G to the

Reservoir shorelines : a methodology for evaluating operational impacts

Energy Technology Data Exchange (ETDEWEB)

Lawrence, M.; Braund-Read, J.; Musgrave, B. [BC Hydro, Burnaby, BC (Canada)

2009-07-01

BC Hydro has been operating hydroelectric facilities for over a century in British Columbia. The integrity and stability of the shorelines and slopes bordering hydroelectric reservoirs is affected by changing water levels in the reservoir, natural processes of flooding, wind and wave action and modification of groundwater levels. Establishing setbacks landward of the shoreline are needed in order to protect useable shoreline property that may be at risk of flooding, erosion or instability due to reservoir operations. Many of the reservoirs in British Columbia are situated in steep, glaciated valleys with diverse geological, geomorphological and climatic conditions and a variety of eroding shorelines. As such, geotechnical studies are needed to determine the operational impacts on reservoir shorelines. Since the 1960s BC Hydro has been developing a methodology for evaluating reservoir impacts and determining the land around the reservoir perimeter that should remain as a right of way for operations while safeguarding waterfront development. The methodology was modified in the 1990s to include geomorphological and geological processes. However, uncertainties in the methodology still exist due to limited understanding of key issues such as rates of erosion and shoreline regression, immaturity of present day reservoir shorelines and impacts of climate change. 11 refs., 1 tab., 7 figs.

Availability of processed foods in the perimeter of public schools in urban areas.

Science.gov (United States)

Leite, Fernanda Helena Marrocos; Oliveira, Maria Aparecida de; Cremm, Elena Carvalho; Abreu, Débora Silva Costa de; Maron, Luana Rieffe; Martins, Paula Andrea

2012-07-01

To assess the availability of food in relation to their degree of industrial processing and the types of food stores in the perimeters of elementary schools. This is a cross-sectional study. 82 food stores located within a 500 m radius buffer of three public schools located in three distinct regions with different socioeconomic levels in the municipality of Santos, state of São Paulo, Brazil, were assessed. All streets within a 500-meter radius of the schools were covered, geographic coordinates were recorded and information about the stores and food items available were collected by direct observation and interview with store managers. Available food items were classified in relation to their degree of industrial processing as ultra-processed foods and minimally processed foods. Kernel's density maps were used to assess the degree of agglomeration of stores near the schools. The stores that offered mostly ultra-processed foods were significantly closer to schools than those who offered mostly minimally processed foods. There was a significant difference between the availability of processed food in different types of stores and between the three regions assessed. The data found by this work evidence that children who attend the three public schools assessed are exposed to an environment that encourages the consumption of ultra-processed foods through easier access of these products in the studied stores.

Airway basement membrane perimeter in human airways is not a constant; potential implications for airway remodeling in asthma.

Science.gov (United States)

McParland, Brent E; Paré, Peter D; Johnson, Peter R A; Armour, Carol L; Black, Judith L

2004-08-01

Many studies that demonstrate an increase in airway smooth muscle in asthmatic patients rely on the assumption that bronchial internal perimeter (P(i)) or basement membrane perimeter (P(bm)) is a constant, i.e., not affected by fixation pressure or the degree of smooth muscle shortening. Because it is the basement membrane that has been purported to be the indistensible structure, this study examines the assumption that P(bm) is not affected by fixation pressure. P(bm) was determined for the same human airway segment (n = 12) fixed at distending pressures of 0 cmH(2)O and 21 cmH(2)O in the absence of smooth muscle tone. P(bm) for the segment fixed at 0 cmH(2)O was determined morphometrically, and the P(bm) for the same segment, had the segment been fixed at 21 cmH(2)O, was predicted from knowing the luminal volume and length of the airway when distended to 21 cmH(2)O (organ bath-derived P(i)). To ensure an accurate transformation of the organ bath-derived P(i) value to a morphometry-derived P(bm) value, had the segment been fixed at 21 cmH(2)O, the relationship between organ bath-derived P(i) and morphometry-derived P(bm) was determined for five different bronchial segments distended to 21 cmH(2)O and fixed at 21 cmH(2)O (r(2) = 0.99, P < 0.0001). Mean P(bm) for bronchial segments fixed at 0 cmH(2)O was 9.4 +/- 0.4 mm, whereas mean predicted P(bm), had the segments been fixed at 21 cmH(2)O, was 14.1 +/- 0.5 mm (P < 0.0001). This indicates that P(bm) is not a constant when isolated airway segments without smooth muscle tone are fixed distended to 21 cmH(2)O. The implication of these results is that the increase in smooth muscle mass in asthma may have been overestimated in some previous studies. Therefore, further studies are required to examine the potential artifact using whole lungs with and without abolition of airway smooth muscle tone and/or inflation.

Advanced Robotics for Air Force Operations

Science.gov (United States)

1989-06-01

active, Teleoperated Mobile Anti-armor Platform potentially lethal defensive agents. ( TMAP ) projects at Martin Marietta and There are valid concerns...regarding Grumman. The TMAP is particularly whether a perimeter defense system interesting as a potential basis for a should be lethal when triggered

Application for Permit to Operate a Class III Solid Waste Disposal Site at the Nevada Test Site Area 5 Asbestiform Low-Level Solid Waste Disposal Site

International Nuclear Information System (INIS)

NSTec Environmental Management

2007-01-01

The NTS is located approximately 105 kilometers (km) (65 miles [mi]) northwest of Las Vegas, Nevada (Figure 1). The U.S. Department of Energy (DOE) is the federal lands management authority for the NTS, and NSTec is the Management and Operations contractor. Access on and off the NTS is tightly controlled, restricted, and guarded on a 24-hour basis. The NTS has signs posted along its entire perimeter

Uncertainties estimation in surveying measurands: application to lengths, perimeters and areas

Science.gov (United States)

Covián, E.; Puente, V.; Casero, M.

2017-10-01

The present paper develops a series of methods for the estimation of uncertainty when measuring certain measurands of interest in surveying practice, such as points elevation given a planimetric position within a triangle mesh, 2D and 3D lengths (including perimeters enclosures), 2D areas (horizontal surfaces) and 3D areas (natural surfaces). The basis for the proposed methodology is the law of propagation of variance-covariance, which, applied to the corresponding model for each measurand, allows calculating the resulting uncertainty from known measurement errors. The methods are tested first in a small example, with a limited number of measurement points, and then in two real-life measurements. In addition, the proposed methods have been incorporated to commercial software used in the field of surveying engineering and focused on the creation of digital terrain models. The aim of this evolution is, firstly, to comply with the guidelines of the BIPM (Bureau International des Poids et Mesures), as the international reference agency in the field of metrology, in relation to the determination and expression of uncertainty; and secondly, to improve the quality of the measurement by indicating the uncertainty associated with a given level of confidence. The conceptual and mathematical developments for the uncertainty estimation in the aforementioned cases were conducted by researchers from the AssIST group at the University of Oviedo, eventually resulting in several different mathematical algorithms implemented in the form of MATLAB code. Based on these prototypes, technicians incorporated the referred functionality to commercial software, developed in C++. As a result of this collaboration, in early 2016 a new version of this commercial software was made available, which will be the first, as far as the authors are aware, that incorporates the possibility of estimating the uncertainty for a given level of confidence when computing the aforementioned surveying

Operability test procedure for PFP wastewater sampling facility

International Nuclear Information System (INIS)

Hirzel, D.R.

1995-01-01

Document provides instructions for performing the Operability Test of the 225-WC Wastewater Sampling Station which monitors the discharge to the Treated Effluent Disposal Facility from the Plutonium Finishing Plant. This Operability Test Procedure (OTP) has been prepared to verify correct configuration and performance of the PFP Wastewater sampling system installed in Building 225-WC located outside the perimeter fence southeast of the Plutonium Finishing Plant (PFP). The objective of this test is to ensure the equipment in the sampling facility operates in a safe and reliable manner. The sampler consists of two Manning Model S-5000 units which are rate controlled by the Milltronics Ultrasonic flowmeter at manhole No.C4 and from a pH measuring system with the sensor in the stream adjacent to the sample point. The intent of the dual sampling system is to utilize one unit to sample continuously at a rate proportional to the wastewater flow rate so that the aggregate tests are related to the overall flow and thereby eliminate isolated analyses. The second unit will only operate during a high or low pH excursion of the stream (hence the need for a pH control). The major items in this OTP include testing of the Manning Sampler System and associated equipment including the pH measuring and control system, the conductivity monitor, and the flow meter

COMPARISON OF FAST PERIMETRIC STRATEGIES USING G2 PROGRAM ON OCTOPUS 101 PERIMETER

Directory of Open Access Journals (Sweden)

Jernej Pajek

2002-12-01

Full Text Available Background. The duration of the perimetric examination was significantly shortened by development of fast perimetric strategies. By analyzing the results of normal, dynamic and TOP strategy we studied the differences in determination of MD, LV, in determination of number of all points with a deficit and number of points with a significant deficit of p < 0.5%.Methods. 22 normal visual fields of 17 subjects (mean age 33 ± 15 years and 22 visual fields with defects of 17 patients (47 ± 16 years having different types and degrees of visual lesions were examined. All visual fields were examined once with each strategy in alternating order using Octopus 101 perimeter with the G2 program.Results. No statistically significant differences were measured in MD values. In abnormal visual fields group, TOP strategy showed 11 ± 14 dB2 lower LV values compared to dynamic strategy (p < 0.01 and 9.8 ± 16 dB2 lower LV values compared to normal strategy (p = 0.02. In the abnormal visual fields group the dynamic strategy measured in average 3 points with the deficit less compared to the other two strategies (p < 0.05. There were no significant differences between strategies in the number of points with a deficit of p < 0.5%.Conclusions. With the exception of lower LV values measured with TOP strategy, the differences between TOP, dynamic strategy results are small and the time sparing benefits are substantial. Therefore the usage of fast perimetric strategies is clinically justified.

Rescue and Fire Fighting on RWY 06R/24L

Directory of Open Access Journals (Sweden)

Kristýna Vaňková

2016-04-01

Full Text Available Rescue and firefighting service is an important and essential part at the Václav Havel Airport Prague and it has to follow the requirements stated in Commission regulations (EU, regulations and laws of Czech Republic. Construction of parallel runway 06R/24L influences runway and taxiway system significantly. Consequences of these construction changes are changes of access routes and new places of potential interventions originates. Safety risks of inaccessible areas at the airport and inability to follow response time come with operations of the new runway. These risks are assessed and mitigated if necessary.

75 FR 44047 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2010-07-27

... Collection and Use: Relocate runway 3 localizer. Pavement management program--rehabilitate taxiway F. Runway... share. Runway 21 extension--phase 2, pave construct runway only. Pavement management program--mill...

Optimization of ramp area aircraft push back time windows in the presence of uncertainty

Science.gov (United States)

Coupe, William Jeremy

It is well known that airport surface traffic congestion at major airports is responsible for increased taxi-out times, fuel burn and excess emissions and there is potential to mitigate these negative consequences through optimizing airport surface traffic operations. Due to a highly congested voice communication channel between pilots and air traffic controllers and a data communication channel that is used only for limited functions, one of the most viable near-term strategies for improvement of the surface traffic is issuing a push back advisory to each departing aircraft. This dissertation focuses on the optimization of a push back time window for each departing aircraft. The optimization takes into account both spatial and temporal uncertainties of ramp area aircraft trajectories. The uncertainties are described by a stochastic kinematic model of aircraft trajectories, which is used to infer distributions of combinations of push back times that lead to conflict among trajectories from different gates. The model is validated and the distributions are included in the push back time window optimization. Under the assumption of a fixed taxiway spot schedule, the computed push back time windows can be integrated with a higher level taxiway scheduler to optimize the flow of traffic from the gate to the departure runway queue. To enable real-time decision making the computational time of the push back time window optimization is critical and is analyzed throughout.

COMPARATIVE INDICATORS OF THE PHYSICAL DEVELOPMENT OF BOYS IN REPUBLIC OF DAGESTAN IN THE VARIOUS ECO-GEOGRAPHICAL ZONES

Directory of Open Access Journals (Sweden)

K. G. Kamalov

2015-01-01

Full Text Available Abstract:Purpose. The examination of the comparative aspect of the physical parameters of the boys in the pre - and puberty in different ecological zones (EZ of the Republic of Dagestan (RD: mountain, foothills and plains of the taxiway.Materials and Methods. The study in 3 eco-geographic zones of the Republic of Dagestan in 2641 a boy aged 11 to 17 years. Inclusion criteria were: age of onset of puberty and the completion of 11-17 years, male gender and residence in the territory (extragenital diseases. We compared the following anthropometric indicators: height, weight, body mass index.Results and conclusions. The analysing of the physical parameters of development in different areas of extragenital diseases RD identifies the following pattern: the lowest height and weight were boys living in the foothills of the taxiway. Their peers living in highland and lowland extragenital diseases taxiway growth were similar and statistically significant differences were found statistically significant differences are particularly evident with 13-14 years in boys from foothills of RD, especially when compared with their peers plain COPIES. Thus, the overall physical development of boys RD closes to those boys Russia, although the tendency to reduce them was determined. Comparative physical development of boys in various extragenital diseases RD, the worst performance demonstrated teenagers from foothill extragenital diseases.

Joint Rapid Airfield Construction (JRAC) 2007 Technology Demonstration

National Research Council Canada - National Science Library

Anderton, Gary L; Berney, IV, Ernest S; Mann, Travis A; Newman, J. K; Baylot, E. A; Miller, Daniel K; Mason, Quint

2008-01-01

...) unsurfaced runway and two 45,480-ft2 (4,225-m2) aircraft parking aprons with associated connector taxiways, all using JRAC technologies focused on rapid construction with reduced logistics and increased system reliability...

Codification of scan path parameters and development of perimeter scan strategies for 3D bowl-shaped laser forming

Science.gov (United States)

Tavakoli, A.; Naeini, H. Moslemi; Roohi, Amir H.; Gollo, M. Hoseinpour; Shahabad, Sh. Imani

2018-01-01

In the 3D laser forming process, developing an appropriate laser scan pattern for producing specimens with high quality and uniformity is critical. This study presents certain principles for developing scan paths. Seven scan path parameters are considered, including: (1) combined linear or curved path; (2) type of combined linear path; (3) order of scan sequences; (4) the position of the start point in each scan; (5) continuous or discontinuous scan path; (6) direction of scan path; and (7) angular arrangement of combined linear scan paths. Regarding these path parameters, ten combined linear scan patterns are presented. Numerical simulations show continuous hexagonal, scan pattern, scanning from outer to inner path, is the optimized. In addition, it is observed the position of the start point and the angular arrangement of scan paths is the most effective path parameters. Also, further experimentations show four sequences due to creat symmetric condition enhance the height of the bowl-shaped products and uniformity. Finally, the optimized hexagonal pattern was compared with the similar circular one. In the hexagonal scan path, distortion value and standard deviation rather to edge height of formed specimen is very low, and the edge height despite of decreasing length of scan path increases significantly compared to the circular scan path. As a result, four-sequence hexagonal scan pattern is proposed as the optimized perimeter scan path to produce bowl-shaped product.

Evaluasi Kebutuhan Luasan Apron Pada Rencana Pengembangan Bandar Udara Internasional Ahmad Yani Semarang

Directory of Open Access Journals (Sweden)

Muhammad Nursalim

2017-03-01

Full Text Available Bandar Udara Ahmad Yani akan memiliki terminal yang lebih luas di sebelah Utara runway, lahan parkir yang luas, apron seluas 61.344 m2 serta dua buah taxiway. Pengembangan tahap II akan menjadikan Bandar Udara Ahmad Yani memiliki apron seluas 72.522 m2 dan 10 buah taxiway serta 1 buah parallel taxiway. Studi ini akan mengevaluasi kebutuhan apron Bandar Udara internasional Ahmad Yani Semarang saat ini dan 20 tahun kedepan. Pada evaluasi ini akan diprediksi jumlah pergerakan pesawat pada tahun rencana yang kemudian akan dikonversi menjadi jumlah pesawat pada jam sibuk. Hasil prediksi jumlah pesawat ini akan dianalisis terhadap kebutuhan apron Bandar Udara Ahmad Yani di tahun rencana. Dengan adanya pengembangan apron diharapkan dapat memenuhi kebutuhan lalu lintas udara. Untuk perencanaan perkerasan apron menggunakan rigid pavement dengan metode FAA dengan software FAARFIELD. Dari hasil perhitungan didapatkan, kebutuhan total jumlah gerbang landas parkir untuk tahun rencana (2035 adalah 51 pesawat, yang terdiri dari 35 kelas C dan 16 kelas D. Selanjutnya didapatkan dimensi gerbang landas parkir pada tahun rencana (2035 adalah untuk kelas C dengan panjang 2096,50 m dan lebar 98,37 m sedangkan untuk kelas D dengan panjang 1547,20 m dan 104,78 m. Tebal perkerasan landas parkir ini adalah 670 mm. Dalam penulangan perkerasan landas parkir tahun rencana (2035 dibutuhkan wiremesh dengan D14-100 dan Dowel dengan diameter 50 mm, panjang 610 mm, dan jarak 460 mm.

Improve the quality and service life of water-based pavement marking paints on pavements with high-iron aggregates.

Science.gov (United States)

2015-08-01

White pavement paint marking on airport runways was being discolored by rust-like staining. Discoloration is a critical safety : problem because white paint indicates runways and yellow paint is used for taxiways and aircraft parking. When the white ...

Redox-Active Star Molecules Incorporating the 4-Benzoylpyridinium Cation - Implications for the Charge Transfer Along Branches vs. Across the Perimeter in Dendrimer

Science.gov (United States)

Leventis, Nicholas; Yang, Jinua; Fabrizio,Even F.; Rawashdeh, Abdel-Monem M.; Oh, Woon Su; Sotiriou-Leventis, Chariklia

2004-01-01

Dendrimers are self-repeating globular branched star molecules, whose fractal structure continues to fascinate, challenge, and inspire. Functional dendrimers may incorporate redox centers, and potential applications include antennae molecules for light harvesting, sensors, mediators, and artificial biomolecules. We report the synthesis and redox properties of four star systems incorporating the 4-benzoyl-N-alkylpyridinium cation; the redox potential varies along the branches but remains constant at fixed radii. Bulk electrolysis shows that at a semi-infinite time scale all redox centers are electrochemically accessible. However, voltammetric analysis (cyclic voltammetry and differential pulse voltammetry) shows that on1y two of the three redox-active centers in the perimeter are electrochemically accessible during potential sweeps as slow as 20 mV/s and as fast as 10 V/s. On the contrary, both redox centers along branches are accessible electrochemically within the same time frame. These results are explained in terms of slow through-space charge transfer and the globular 3-D folding of the molecules and are discussed in terms of their implications on the design of efficient redox functional dendrimers.

Two-phase Cryogenic Avalanche Detector with electroluminescence gap operated in argon doped with nitrogen

Energy Technology Data Exchange (ETDEWEB)

Bondar, A.; Buzulutskov, A. [Budker Institute of Nuclear Physics SB RAS, Lavrentiev avenue 11, 630090 Novosibirsk (Russian Federation); Novosibirsk State University, Pirogov street 2, 630090 Novosibirsk (Russian Federation); Dolgov, A. [Novosibirsk State University, Pirogov street 2, 630090 Novosibirsk (Russian Federation); Nosov, V.; Shekhtman, L.; Shemyakina, E.; Sokolov, A. [Budker Institute of Nuclear Physics SB RAS, Lavrentiev avenue 11, 630090 Novosibirsk (Russian Federation); Novosibirsk State University, Pirogov street 2, 630090 Novosibirsk (Russian Federation)

2017-02-11

A two-phase Cryogenic Avalanche Detector (CRAD) with electroluminescence (EL) gap, operated in argon doped with a minor (49±7 ppm) admixture of nitrogen, has been studied. The EL gap was optically read out using cryogenic PMTs located on the perimeter of the gap. We present the results of the measurements of the N{sub 2} content, detector sensitivity to X-ray-induced signals, EL gap yield and electron lifetime in the liquid. The detector sensitivity, at a drift field in liquid Ar of 0.6 kV/cm, was measured to be 9 and 16 photoelectrons recorded at the PMTs per keV of deposited energy at 23 and 88 keV respectively. Such two-phase detectors, with enhanced sensitivity to the S2 (ionization-induced) signal, are relevant in the field of argon detectors for dark matter search and low energy neutrino detection.

76 FR 56001 - Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals

Science.gov (United States)

2011-09-09

...: Regional intermodal transportation center. Determination: Partially approved. The FAA determined that... Approved for Collection and Use at a $3.00 PFC Level: Public information display kiosks. Wildlife hazard assessment study. Interactive employee training module. Blast fence extension--taxiway D. Aircraft rescue and...

200-BP-11 operable unit and 216-B-3 main pond work/closure plan, Hanford Site, Richland, Washington. Volume 1: Field investigation and sampling strategy

International Nuclear Information System (INIS)

1994-09-01

This document coordinates a Resource Conservation and Recovery Act (RCRA) past-practice work plan for the 200-BP-11 Operable Unit and a RCRA closure/postclosure plan for the 216-B-3 Main Pond and 216-B-3-3 Ditch [treatment, storage, and/or disposal (TSD) unit]. Both RCRA TSD and past-practice waste management units are contained within the 200-BP-11 Operable Unit. The 200-BP-11 Operable Unit is a source operable unit located on the east side of the B Plant Source Aggregate Area in the 200 East Area of the Hanford Site. The operable unit lies just east of the 200 East Area perimeter fence and encompass approximately 476 hectares (1,175 acres). Source operable units include waste management units that are potential sources of radioactive and/or hazardous substance contamination. Source waste management units are categorized in the Hanford Federal Facility Agreement and Consent Order as either RCRA TSD, RCRA past-practice, or Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) past-practice. As listed below and in the Tri-Party Agreement, the 200-BP-11 Operable Unit contains five RCRA past-practice and five RCRA TSD waste management units. Additionally, for RCRA TSD permitting purposes, the RCRA TSD waste management units are subdivided into two RCRA TSD units

Environmental monitoring at the Savannah River Plant. Annual report, 1979

International Nuclear Information System (INIS)

Ashley, C.; Zeigler, C.C.; Culp, P.A.; Smith, D.L.

1982-11-01

An extensive surveillance program has been maintained since 1951 to determine the concentrations of radionuclides in a 1200 square mile area in the environs of the plant and the radiation exposure of the population resulting from SRP operations. This document summarizes the 1979 results. The radiation dose at the plant perimeter and the population dose in the region from SRP operations are very small relative to the dose recieved from naturally occurring radiation. The annual average dose in 1979 from atmospheric releases of radioactive materials was 0.71 mrem at the perimeter (1% of natural background). The maximum dose at the plant perimeter was 0.97 mrem. Air and water are the major dispersal media for radioactive emissions. Samples representing most segments of the environment were monitored. Releases of radioactivity from SRP had a very small effect on living plants and animals and were too minute to be detectable, and with a few exceptions, concentrations outside the plant boundary were too low to distinguish from the natural radioactive background and continuing worldwide fallout from nuclear weapons tests. 40 figures, 60 tables. (MF)

47 CFR 15.209 - Radiated emission limits; general requirements.

Science.gov (United States)

2010-10-01

...), fundamental emissions from intentional radiators operating under this section shall not be located in the... fundamental emission. For intentional radiators which operate under the provisions of other sections within... incorporated digital device. (g) Perimeter protection systems may operate in the 54-72 MHz and 76-88 MHz bands...

A Robotic Swarm for Spill Finding and Perimeter Formation

National Research Council Canada - National Science Library

Bruemmer, David J; Dudenhoeffer, Donald D; McKay, Mark D; Anderson, Matthew O

2002-01-01

... intelligence as seen in a colony of ants or swarm of bees. A suite of C2 tools, AgentTools, has been developed to enable an operator to inject high-level domain knowledge and guidance into the behavior of the otherwise autonomous robots...

Light your runways and taxiways without electricity

International Nuclear Information System (INIS)

Haff, K.W.; Tompkins, J.A.

1984-01-01

The history of the radioluminescent light program at Oak Ridge National Laboratory is from the earliest use of radium through strontium-90, carbon-14, and krypton-85 to the present work with tritium. Field testing of radioluminescent lights and safety and quality control are discussed

2-D Fractal Carpet Antenna Design and Performance

Science.gov (United States)

Barton, C. C.; Tebbens, S. F.; Ewing, J. J.; Peterman, D. J.; Rizki, M. M.

2017-12-01

A 2-D fractal carpet antenna uses a fractal (self-similar) pattern to increase its perimeter by iteration and can receive or transmit electromagnetic radiation within its perimeter-bounded surface area. 2-D fractals are shapes that, at their mathematical limit (infinite iterations) have an infinite perimeter bounding a finite surface area. The fractal dimension describes the degree of space filling and lacunarity which quantifies the size and spatial distribution of open space bounded by a fractal shape. A key aspect of fractal antennas lies in iteration (repetition) of a fractal pattern over a range of length scales. Iteration produces fractal antennas that are very compact, wideband and multiband. As the number of iterations increases, the antenna operates at higher and higher frequencies. Manifestly different from traditional antenna designs, a fractal antenna can operate at multiple frequencies simultaneously. We have created a MATLAB code to generate deterministic and stochastic modes of Sierpinski carpet fractal antennas with a range of fractal dimensions between 1 and 2. Variation in fractal dimension, stochasticity, number of iterations, and lacunarities have been computationally tested using COMSOL Multiphysics software to determine their effect on antenna performance

Report on geological surveys in the 300-FF-1 operable unit

International Nuclear Information System (INIS)

Sandness, G.A.

1991-03-01

This report describes a set of geophysical surveys performed by the Pacific Northwest Laboratory at selected locations within the 300-FF-1 Operable Unit at Hanford. Field work and preliminary data processing activities were initiated in September 1989. These actions were terminated by the Westinghouse Hanford Company before completion in December 1989. Work was reinitiated in October 1990, to complete the processing of the data that had already been collected and to report the results. Because the field work was only partially completed, the task objectives, as presented in the Statement of Work, could not be fully met. This report is, therefore, a progress report covering the work performed through December 11, 1989. This task involved (1) ground-penetrating radar surveys of the 618-4 and 618-5 Burial Grounds, and (2) ground-penetrating radar and electromagnetic induction surveys along the assumed routes of the abandoned process sewers and radioactive liquid waste sewers in the 300-FF-1 Operable Unit. The surveys in the burial grounds were intended to identify burial trenches and pits, to determine the depth of fill, and to locate waste materials, including any that might be outside the perimeter fences. The surveys along the sewer routes were intended, first, to confirm the locations of the sewers as shown on existing maps or to otherwise accurately determine their locations, and second, to attempt to identify locations of possible leaks. 3 refs., 3 figs., 2 tabs

Quarterly environmental radiological survey summary: First quarter 1995 100, 200, 300, and 600 Areas

International Nuclear Information System (INIS)

McKinney, S.M.

1995-04-01

This report provides a summary of the radiological surveys performed in support of the operational environmental monitoring program at the Hanford Site. The surveys included in this program consist of inactive waste sites; outdoor radiological control areas; tank farm perimeters and associated diversion boxes, lift stations, and vent stations; perimeters of active or uncovered waste sites such as burial grounds, retention basins, ponds, process trenches, and ditches; and road and rail surfaces. This report provides a summary of the radiological surveys performed during the First Quarter of 1995. The status of corrective actions required from current and past reports are also discussed

Report of Accomplishments under the Airport Improvement Program.

Science.gov (United States)

1983-09-30

0) RUNLWAYMLhy>, FRIEDMAN MEMORIA :. ACCESLS WAY :fHppjV’EMO;:tr, * (COMMERCIAL, HAIILEY U.. 43t, 1% ISCELLAINiAUS SA!L: :v -YT;;:- FRIEDMAN MEMORIA ...airport no. funds Description of work K= 5 0 I S (CONTINUED) CHAMPAIGN/ URBANA 02 $ 423,364 TAXIWAY IMPROVEMEN’:’S; A’WVESS WAY UNIVERSITY OF CONSTRUCTION

Algorithm for modelling the removal of snow from streches of the manoeuvring aera of an airport

Energy Technology Data Exchange (ETDEWEB)

Soriguera Marti, F.; Martinez-Diaz, M.; Perez Perez, I.

2016-07-01

This article presents an algorithm and a structured methodology to address the issue of the optimisation of resources when clearing snow from stretches of the manoeuvring area of an airport. This overall issue is how to best utilise limited resources to remove snow from taxiways and runways so as to leave surfaces in an acceptable state for aircraft operations. To achieve this the airfield is divided into subsets of significant stretches for the purpose of operations and target times are set at which these are to be open to aircraft traffic. The manoeuvring area is also divided into zones, with the condition that the subsets of significant stretches lie within just one of these zones. The mathematical model contains operating restrictions with regard to the fulfilment of partial operational targets applied to the subsets of significant stretches, and also concerning the snow-clearing machines. The problem is solved by an iterative optimisation process based on linear programming applied successively to the zones that make up the manoeuvring area during each iteration. The method is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid - Barajas Airport. (Author)

Perímetro escrotal e idade à puberdade em ovinos Merino Australiano submetidos a diferentes regimes alimentares - DOI: 10.4025/actascianimsci.v27i4.1179 Scrotal perimeter and age of puberty in Australian Merino Sheep, submitted to different alimentary strategies - DOI: 10.4025/actascianimsci.v27i4.1179

Directory of Open Access Journals (Sweden)

Leonardo Franco Martins

2005-03-01

of different colors (orange, purple, black and green distributed among the treatments. Body score maintained the same relations that were observed on body weight. Animals with black earring presented smaller scrotal perimeter on the 132nd day, with larger scrotal growth, due to the nutritional improvement of those animals on specific periods. As a condition of corporal score, the scrotal perimeter maintained the same relationship among the groups observed for the body weight: the orange group presented the highest perimeter, followed by the purple, green and black group. Only 62.5% of the animals reached puberty until the end of the experiment. Animals reached puberty with the same score, scrotal perimeter and age, albirt they presented different weights

Glaucoma Diagnostic Capabilities of Foveal Avascular Zone Parameters Using Optical Coherence Tomography Angiography According to Visual Field Defect Location.

Science.gov (United States)

Kwon, Junki; Choi, Jaewan; Shin, Joong Won; Lee, Jiyun; Kook, Michael S

2017-12-01

To assess the diagnostic ability of foveal avascular zone (FAZ) parameters to discriminate glaucomatous eyes with visual field defects (VFDs) in different locations (central vs. peripheral) from normal eyes. Totally, 125 participants were separated into 3 groups: normal (n=45), glaucoma with peripheral VFD (PVFD, n=45), and glaucoma with central VFD (CVFD, n=35). The FAZ area, perimeter, and circularity and parafoveal vessel density were calculated from optical coherence tomography angiography images. The diagnostic ability of the FAZ parameters and other structural parameters was determined according to glaucomatous VFD location. Associations between the FAZ parameters and central visual function were evaluated. A larger FAZ area and longer FAZ perimeter were observed in the CVFD group than in the PVFD and normal groups. The FAZ area, perimeter, and circularity were better in differentiating glaucomatous eyes with CVFDs from normal eyes [areas under the receiver operating characteristic curves (AUC), 0.78 to 0.88] than in differentiating PVFDs from normal eyes (AUC, 0.51 to 0.64). The FAZ perimeter had a similar AUC value to the circumpapillary retinal nerve fiber layer and macular ganglion cell-inner plexiform layer thickness for differentiating eyes with CVFDs from normal eyes (all P>0.05, the DeLong test). The FAZ area was significantly correlated with central visual function (β=-112.7, P=0.035, multivariate linear regression). The FAZ perimeter had good diagnostic capability in differentiating glaucomatous eyes with CVFDs from normal eyes, and may be a potential diagnostic biomarker for detecting glaucomatous patients with CVFDs.

Structure-function relationship between the octopus perimeter cluster mean sensitivity and sector retinal nerve fiber layer thickness measured with the RTVue optical coherence tomography and scanning laser polarimetry.

Science.gov (United States)

Naghizadeh, Farzaneh; Garas, Anita; Vargha, Péter; Holló, Gábor

2014-01-01

To determine structure-function relationship between each of 16 Octopus perimeter G2 program clusters and the corresponding 16 peripapillary sector retinal nerve fiber layer thickness (RNFLT) values measured with the RTVue-100 Fourier-domain optical coherence tomography (RTVue OCT) and scanning laser polarimetry with variable corneal compensation (GDx-VCC) and enhanced corneal compensation (GDx-ECC) corneal compensation. One eye of 110 white patients (15 healthy, 20 ocular hypertensive, and 75 glaucoma eyes) were investigated. The Akaike information criterion and the F test were used to identify the best fitting model. Parabolic relationship with logarithmic cluster mean sensitivity and linear sector RNFLT values provided the best fit. For RTVue OCT, significant (P0.05) was found for the control eyes. Mean sensitivity of the Octopus visual field clusters showed significant parabolic relationship with the corresponding peripapillary RNFLT sectors. The relationship was more general with the RTVue OCT than GDx-VCC or GDx-ECC. The results show that visual field clusters of the Octopus G program can be applied for detailed structure-function research.

Residual mosquito barrier treatments on U.S. military camouflage netting in a southern California desert environment

Science.gov (United States)

Treating perimeters of vegetation with residual insecticides for protection from mosquito vectors has potential for U.S. military force health protection. However, for current U.S. military operations in hot-arid environments with little or no vegetation, residual applications on portable artificial...

Fire Perimeters (2012)

Data.gov (United States)

Department of Homeland Security — The Geospatial Multi-Agency Coordination Group, or GeoMAC, is an internet-based mapping tool originally designed for fire managers to access online maps of current...

Spectral Graph Theory Analysis of Software-Defined Networks to Improve Performance and Security

Science.gov (United States)

2015-09-01

too costly to continue operating and administrating them in the same basic manner as standardized by Advanced Research Projects Agency Network...to better monitor the network as compared to network perimeter defenses, such as firewalls and web server demilitarized zones (DMZs). The Open Network

Surface Movement Incidents Reported to the NASA Aviation Safety Reporting System

Science.gov (United States)

Connell, Linda J.; Hubener, Simone

1997-01-01

Increasing numbers of aircraft are operating on the surface of airports throughout the world. Airport operations are forecast to grow by more that 50%, by the year 2005. Airport surface movement traffic would therefore be expected to become increasingly congested. Safety of these surface operations will become a focus as airport capacity planning efforts proceed toward the future. Several past events highlight the prevailing risks experienced while moving aircraft during ground operations on runways, taxiways, and other areas at terminal, gates, and ramps. The 1994 St. Louis accident between a taxiing Cessna crossing an active runway and colliding with a landing MD-80 emphasizes the importance of a fail-safe system for airport operations. The following study explores reports of incidents occurring on an airport surface that did not escalate to an accident event. The Aviation Safety Reporting System has collected data on surface movement incidents since 1976. This study sampled the reporting data from June, 1993 through June, 1994. The coding of the data was accomplished in several categories. The categories include location of airport, phase of ground operation, weather /lighting conditions, ground conflicts, flight crew characteristics, human factor considerations, and airport environment. These comparisons and distributions of variables contributing to surface movement incidents can be invaluable to future airport planning, accident prevention efforts, and system-wide improvements.

Probing properties of the interfacial perimeter sites in TiO x /Au/SiO 2 with 2-propanol decomposition

Energy Technology Data Exchange (ETDEWEB)

Wu, Yi Y.; Kung, Harold H. (NWU)

2017-11-01

The decomposition of 2-propanol was studied over SiO2, SiO2 with an overlayer of TiO2 (Ti/SiO2), Au/SiO2, and Au/SiO2 with an overlayer of TiO2 (Ti/[Au/SiO2]) at 170–190 °C. There was no reaction on SiO2. Propene was the only product on Ti/SiO2, and its rate of formation increased proportionally with the Ti content. Acetone was the major product (selectivity 65–99%) on all Au-containing catalysts. Its rate of formation also increased with Ti loading. In addition, small amounts of propene were also formed on Ti/[Au/SiO2] the rate of which increased with Ti loading. Characterization of the catalysts with N2 adsorption, STEM, DR-UV-vis spectroscopy, XPS, XANES and EXAFS suggested that the Ti formed an amorphous TiO2 overlayer on the catalyst. At high Ti loadings (4–5 wt.%), there were patches of thick porous TiO2 layer, and some microdomains of crystalline TiO2 could be detected. Au was present as 1–3 nm nanoparticles on all catalysts, before and after used in reaction. Only Lewis acid sites were detected based on results from pyridine adsorption, and their quantities increased with Ti loading. Based on the comparison of reaction rates, the dependence of the kinetics on 2-propanol partial pressure, the apparent activation energies, and the effect of co-feeding O2 among different catalysts, it was concluded that propene was formed on the TiO2 overlayer, acetone was formed primarily at the Au-TiO2 interfacial perimeter sites, and α-C-H bond breaking preceding acetone formation was more facile on Au at the interfacial site than other surface Au atoms. Implication of these results to the selective acetone formation in the oxidation of propane in the presence of a O2/H2 mixture was discussed.

Radiation safety considerations for operation of a portable 6 MeV electron linear accelerator

International Nuclear Information System (INIS)

Schonberg, R.G.

1987-01-01

Field use of the ''MINAC'' presents some unique problems. There are some high voltage electrical safety problems, but these pale in comparison to the radiation related problems. The perimeter limits are determined by a combination of leakage and scatter. In most cases, the boundary limit is determined by scatter. Localized shielding can be applied to reduce scatter which is primarily of rest-mass energy (0.511 MeV). Careful primary beam collimating can also be used to reduce the radiation hazard

Security Considerations of Doing Business via the Internet: Cautions To Be Considered.

Science.gov (United States)

Aldridge, Alicia; White, Michele; Forcht, Karen

1997-01-01

Lack of security is perceived as a major roadblock to doing business online. This article examines system, user, and commercial transaction privacy on the World Wide Web and discusses methods of protection: operating systems security, file and data protection, user education, access restrictions, data authentication, perimeter and transaction…

Grandfather Tang Goes to High School

Science.gov (United States)

Johnson, Iris DeLoach

2006-01-01

This article describes how the children's literature book, Grandfather Tang's Story, which is commonly used in the elementary grades, may be used at the high school level to engage students in an exploration of area and perimeter which includes basic operations with square roots, ordering numbers (decimal approximations, and their exact…

Application for Permit to Operate a Class III Solid Waste Disposal Site at the Nevada Test Site - U10c Disposal Site

Energy Technology Data Exchange (ETDEWEB)

NSTec Environmental Programs

2010-08-05

The NTS is located approximately 105 km (65 mi) northwest of Las Vegas, Nevada. NNSA/NSO is the federal lands management authority for the NTS and NSTec is the Management & Operations contractor. Access on and off the NTS is tightly controlled, restricted, and guarded on a 24-hour basis. The NTS is posted with signs along its entire perimeter. NSTec is the operator of all solid waste disposal sites on the NTS. The U10C Disposal Site is located in the northwest corner of Area 9 at the NTS (Figure 1) and is located in a subsidence crater created by two underground nuclear events, one in October 1962 and another in April 1964. The disposal site opened in 1971 for the disposal of rubbish, refuse, pathological waste, asbestos-containing material, and industrial solid waste. A Notice of Intent form to operate the disposal site as a Class II site was submitted to the state of Nevada on January 26, 1994, and was acknowledged in a letter to the DOE on February 8, 1994. It operated as a state of Nevada Class II Solid Waste Disposal Site (SWDS) until it closed on October 5, 1995, for retrofit as a Class III SWDS. The retrofit consisted of the installation of a minimum four-foot compacted soil layer to segregate the different waste types and function as a liner to inhibit leachate and water flow into the lower waste zone. Five neutron monitoring tubes were installed in this layer to monitor possible leachate production and water activity. Upon acceptance of the installed barrier and approval of an Operating Plan by NDEP/BFF, the site reopened in January 1996 as a Class III SWDS for the disposal of industrial solid waste and other inert waste.

Straight ends for superconducting dipole magnet using constant perimeter geometry

International Nuclear Information System (INIS)

Royet, J.

1989-01-01

The ends of the SSC Dipole magnets are a very critical aspect of the superconducting cable windings needed for this large project. The internal coils, where the radius at the pole is as small as 3/10 of an inch for the first turn, are difficult to form with the very stiff cable, and a high tension is needed. The curing operation on the coils is performed in a heated forming press which applies an important additional stress on the superconducting wire and insulation. A new design of this sensitive region of the magnets was performed at LBL, and several prototypes were built and tested. In this paper the construction method used to solve some of the most critical problems is exposed along with a description of the experimental work in progress. 3 refs., 2 figs

Frequency inverter and irrigation management in irrigated perimeter on Jaiba region - MG, Brazil; Uso de inversor de frequencia e do manejo da irrigacao em perimetro da regiao do Jaiba, MG

Energy Technology Data Exchange (ETDEWEB)

Moraes, Maria Joselma de; Oliveira Filho, Delly; Vieira, Gustavo H.S. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola], Emails: maria.moraes@ufv.br, delly@ufv.br, ghsvieira@ifes.edu.br; Scarcelli, Ricardo de O.C. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Eletrica], E-mail: rocvenceslau@yahoo.com.br

2010-07-01

The electric energy expenditure and the irrigation depth for one irrigated perimeter on Jaiba region/MG, Brazil, for the cultures: pineapple, banana, guava, lemon, papaya, mango, passion fruit, cantaloupe, pine cone and grape. With the monthly irrigation depth data for an hypothetical area of 12 lots (10 ha each), it was simulated, with Galateia software, the head pressure for 4 combinations of cultures: first - papaya (12 lots); second - banana (8 lots), guava (1), papaya (1), mango (1) and passion fruit (1); third - papaya (8), guava (1), pineapple (1), (1) and lemon (1); and fourth - guava (8), mango (1), papaya (1), pine cone (1) and passion fruit (1). It was dimensioned the necessary power and the electrical energy expenses with TOU (green category tariff) for the biggest irrigation depth. The frequency inverter use and the management of the number of working hours were simulated for each combination, in order to maximize the motor's load and the pump-motor set performance. For the combinations 2, 3, and 4 occurred reduction on the electrical energy consumption of 6%, 8% and 20%, respectively in respect of the combination 1. (author)

The use of geological data from pilot holes for predicting FPI (full perimeter intersection) fractures

International Nuclear Information System (INIS)

Joutsen, A.

2012-02-01

Posiva Oy is responsible for preparation of final disposal of spent nuclear fuel in Olkiluoto. The knowledge about existing network of fractures is important for the safety and feasibility of the final repository. The bedrock properties essential for safety case are analyzed in investigations of Rock Suitability Criteria (RSC). One subtask in RSC is avoidance of large (long) fractures adjacent to disposal holes. The long fractures have been defined in tunnel mapping to indicate tunnel cross-cutting fractures (TCF) or full perimeter intersections (FPI). The purpose for this study was to evaluate the possibility of recognizing FPIs from drill cores by their geological properties. The study was carried out by correlating FPIs mapped from the ONKALO tunnel to the pilot holes logging data with a view of finding out which fracture in the pilot hole corresponds to the FPI in the tunnel. It was also estimated what kind of geological properties does FPIs commonly have in the tunnel and how does these properties differ from the FPI correlated pilot hole fractures. The data sources for this study are the pilot holes from ONK-PH8 to ONK-PH14 and the systematic geological mapping data. The FPIs used in this study usually follow the general trends of the fracturing in the Olkiluoto bedrock. The fracture surface profiles are principally undulating and a striation can be often seen on the fracture surfaces. The FPIs are frequently moderately to intensely altered with diverse filling mineralogy and thick fracture fillings in comparison to the regular fractures. The FPI correlated pilot hole fractures have slightly different properties in comparison to the FPIs. These fractures have wider range of different fracture surface profiles and are slightly less altered than the FPIs. Filling mineralogy follows the trends of the FPIs but filling thicknesses are thinner. These differences probably occur because of the variable uncertainties related to the correlation and to the fact that the

The use of geological data from pilot holes for predicting FPI (full perimeter intersection) fractures

Energy Technology Data Exchange (ETDEWEB)

Joutsen, A.

2012-02-15

Posiva Oy is responsible for preparation of final disposal of spent nuclear fuel in Olkiluoto. The knowledge about existing network of fractures is important for the safety and feasibility of the final repository. The bedrock properties essential for safety case are analyzed in investigations of Rock Suitability Criteria (RSC). One subtask in RSC is avoidance of large (long) fractures adjacent to disposal holes. The long fractures have been defined in tunnel mapping to indicate tunnel cross-cutting fractures (TCF) or full perimeter intersections (FPI). The purpose for this study was to evaluate the possibility of recognizing FPIs from drill cores by their geological properties. The study was carried out by correlating FPIs mapped from the ONKALO tunnel to the pilot holes logging data with a view of finding out which fracture in the pilot hole corresponds to the FPI in the tunnel. It was also estimated what kind of geological properties does FPIs commonly have in the tunnel and how does these properties differ from the FPI correlated pilot hole fractures. The data sources for this study are the pilot holes from ONK-PH8 to ONK-PH14 and the systematic geological mapping data. The FPIs used in this study usually follow the general trends of the fracturing in the Olkiluoto bedrock. The fracture surface profiles are principally undulating and a striation can be often seen on the fracture surfaces. The FPIs are frequently moderately to intensely altered with diverse filling mineralogy and thick fracture fillings in comparison to the regular fractures. The FPI correlated pilot hole fractures have slightly different properties in comparison to the FPIs. These fractures have wider range of different fracture surface profiles and are slightly less altered than the FPIs. Filling mineralogy follows the trends of the FPIs but filling thicknesses are thinner. These differences probably occur because of the variable uncertainties related to the correlation and to the fact that the

Control of Multiple Robotic Sentry Vehicles

Energy Technology Data Exchange (ETDEWEB)

Feddema, J.; Klarer, P.; Lewis, C.

1999-04-01

As part of a project for the Defense Advanced Research Projects Agency, Sandia National Laboratories is developing and testing the feasibility of using of a cooperative team of robotic sentry vehicles to guard a perimeter and to perform surround and diversion tasks. This paper describes on-going activities in the development of these robotic sentry vehicles. To date, we have developed a robotic perimeter detection system which consists of eight ''Roving All Terrain Lunar Explorer Rover'' (RATLER{trademark}) vehicles, a laptop-based base-station, and several Miniature Intrusion Detection Sensors (MIDS). A radio frequency receiver on each of the RATLER vehicles alerts the sentry vehicles of alarms from the hidden MIDS. When an alarm is received, each vehicle decides whether it should investigate the alarm based on the proximity of itself and the other vehicles to the alarm. As one vehicle attends an alarm, the other vehicles adjust their position around the perimeter to better prepare for another alarm. We have also demonstrated the ability to drive multiple vehicles in formation via tele-operation or by waypoint GPS navigation. This is currently being extended to include mission planning capabilities. At the base-station, the operator can draw on an aerial map the goal regions to be surrounded and the repulsive regions to be avoided. A potential field path planner automatically generates a path from the vehicles' current position to the goal regions while avoiding the repulsive regions and the other vehicles. This path is previewed to the operator before the regions are downloaded to the vehicles. The same potential field path planner resides on the vehicle, except additional repulsive forces from on-board proximity sensors guide the vehicle away from unplanned obstacles.

Circumferential nonuniformity of cladding radiation swelling of fast reactor peripheral fuel elements

International Nuclear Information System (INIS)

Reutov, V.F.; Farkhutdinov, K.G.

1977-01-01

The results are presented of the investigation into the perimeter radiation swelling of Kh18N10T stainless steel cladding in different cross sections of a peripheral fuel element of the BR-5 reactor. The fluence on the cladding is 1.8-2.9 x 10 22 fast neutr/cm 2 , the operating temperatures in different parts of the fuel element being 430 deg to 585 deg C. There has been observed circumferential non-uniformity of the distribution, concentration, and of the total volume of radiation cavities, which is due to temperature non-uniformity along the cladding perimeter. It is shown that such non-uniformity of radiation swelling of the cladding material may result in bending of the peripheral fuel element with regard to the fuel assembly sheath walls

Nuclear power plant security systems - The need for upgrades

International Nuclear Information System (INIS)

Murskyj, M.P.; Furlow, C.H.

1989-01-01

Most perimeter security systems for nuclear power plants were designed and installed in the late 1970s or early 1980s. This paper explores the need to regularly evaluate and possibly upgrade a security system in the area of perimeter intrusion detection and surveillance. this paper discusses US Nuclear Regulatory Commission audits and regulatory effectiveness reviews (RERs), which have raised issues regarding the performance of perimeter security systems. The audits and RERs identified various degrees of vulnerability in certain aspects of existing perimeter security systems. In addition to reviewing the regulatory concerns, this paper discusses other reasons to evaluate and/or upgrade a perimeter security system

Commonwealth Edison captures intruders on screen

International Nuclear Information System (INIS)

Anon.

1991-01-01

Commonwealth Edison has developed three software programs, with the supporting hardware, that significantly upgrade security monitoring capabilities at nuclear power stations. These are Video Capture, the Alternate Perimeter Alarm Reporting System, and the Redundant Access Control System. Conventional video systems only display what is happening at the moment and rewinding a VCR to discover what occurred earlier takes time. With Video Capture the images can be instantly restored to the monitor screen and printed out. When one of the security devices used to monitor the perimeter of a Commonwealth Edison nuclear power station is tripped, the Video Capture program stores the visual image digitally. This is done using similar technology to the employed in fax machines. The security staff are thus able to distinguish immediately between disturbances taking place simultaneously at different security zones. They can magnify and compare the stored images and print them out. The Alternate Perimeter Alarm Reporting System was developed to speed the transmission of alarm signals from the security sensors to the security computer. The Redundant Access Control System (RACS) was originally developed to meet the requirement of the Nuclear Regulatory Commission (NRC) for a secondary computer-operated security measure to monitor employee access to a nuclear power station. When employee drug testing became an additional NRC requirement, the Nuclear Division of Commonwealth Edison asked their programmers to modify RACS to generate a random list of personnel to be tested for substance abuse. RACS was then further modified to produce numerous station operating reports that had been previously compiled manually. (author)

Strategy for the Identification of an INL Comprehensive Utility Corridor

Energy Technology Data Exchange (ETDEWEB)

John Reisenauer

2011-05-01

This report documents the strategy developed to identify a comprehensive utility corridor (CUC) on the Idaho National Laboratory (INL) Site. The strategy established the process for which the Campus Development Office will evaluate land management issues. It is a process that uses geographical information system geospatial technology to layer critical INL mission information in a way that thorough evaluations can be conducted and strategies developed. The objective of the CUC Project was to develop a process that could be implemented to identify potential utility corridor options for consideration. The process had to take into account all the missions occurring on the INL and other land-related issues. The process for developing a CUC strategy consists of the following four basic elements using geographical information system capabilities: 1. Development of an INL base layer map; this base layer map geospatially references all stationary geographical features on INL and sitewide information. 2. Development of current and future mission land-use need maps; this involved working with each directorate to identify current mission land use needs and future land use needs that project 30 years into the future. 3. Development of restricted and potential constraint maps; this included geospatially mapping areas such as wells, contaminated areas, firing ranges, cultural areas, ecological areas, hunting areas, easement, and grazing areas. 4. Development of state highway and power line rights of way map; this included geospatially mapping rights-of-way along existing state highways and power lines running through the INL that support INL operations. It was determined after completing and evaluating the geospatial information that the area with the least impact to INL missions was around the perimeter of the INL Site. Option 1, in this document, identifies this perimeter; however, it does not mean the entire perimeter is viable. Many places along the perimeter corridor cannot

Gender on the growth of Criollo foals from birth to three years of age

Directory of Open Access Journals (Sweden)

Anelise Maria Hammes Pimentel

Full Text Available ABSTRACT: The objective of the present study was to evaluate the effect of gender on the growth of Criollo foals, in order to use this information as a reference for breeding as well as in future research. Body height, thoracic perimeter, and cannon bone perimeter of 75 foals were measured from two farms in Rio Grande do Sul, Brazil (Lat. 32°, 33′, 58″, Long. 53°, 22′, 33″ and from three generations over three years. In both farms, animals were kept under the same range and feeding conditions. Nonlinear regression models were applied to describe the growth curves for the three traits over the experimental period. Cannon bone perimeter was greater in males than in females (P<0.001 but the predicted curves for body height and thoracic perimeter did not differ between genders. For all traits, the highest rate of increase was achieved in the first year of life (body height = 74%, thoracic perimeter = 76%, and cannon bone perimeter = 63% for males and 83% for females. Results of this study indicated that changes in body height and thoracic perimeter can be predicted using nonlinear models in both male and female foals, until they reach three years of age; whereas, changes in cannon bone perimeter should be modeled separately for each gender.

Large Crater Repair at Silver Flag Exercise Site, Tyndall Air Force Base, Florida

Science.gov (United States)

2015-08-01

fiberglass mat ( FFM ) survived medium-speed braking events and was deemed suitable for use on taxiways and aprons. 2. The current USAF FFM system failed...braking events due to failure of the connector bushings. After replacement with more robust connector bushings from the FFM system, the FRP system...withstood the high-speed taxi events that caused the FFM to fail. ERDC/GSL TR-15-27 2 4. AM2 aluminum matting was successfully tested as a suitable

Pressurized Hybrid Heat Pipe for Passive IN-Core Cooling System (PINCs) in Advanced Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung Mo; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

2016-05-15

The representative operating limit of the thermosyphon heat pipe is flooding limit that arises from the countercurrent flow of vapor and liquid. The effect of difference between wetted perimeter and heated perimeter on the flooding limit of the thermosyphons has not been studied; despite the effect of cross-sectional area of the vapor path on the heat transfer characteristics of thermosyphons have been studied. Additionally, the hybrid heat pipe must operate at the high temperature and high pressure environment because it will be inserted to the active core to remove the decay heat. However, the previously studied heat pipes operated below the atmospheric pressure. Therefore, the effect of the unique geometry for hybrid heat pipe and operating pressure on the heat transfer characteristics including the flooding limit of hybrid heat pipe was experimentally measured. Hybrid heat pipe as a new conceptual decay heat removal device was proposed. For the development of hybrid heat pipe operating at high temperature and high pressure conditions, the pressurized hybrid heat pipe was prepared and the thermal performances including operation limits of hybrid heat pipe were experimentally measured. Followings were obtained: (1) As operating pressure of the heat pipe increases, the evaporation heat transfer coefficient increases due to heat transfer with convective pool boiling mode. (2) Non-condensable gas charged in the test section for the pressurization lowered the condensation heat transfer by impeding the vapor flow to the condenser. (3) The deviations between experimentally measured flooding limits for hybrid heat pipes and the values from correlation for annular thermosyphon were observed.

Determination of action zone in the nuclear / radiology handling process

International Nuclear Information System (INIS)

Ade Awalludin

2013-01-01

Assessment has been conducted on determination of action zone in nuclear or radiological emergency. The assessment is taken into account radiological risk level in nuclear or radiological emergency management process outside nuclear installation. Managing of nuclear emergency is same as that one of other emergency by adding the principles of radiation protection. This study aims to provide guidance in making of safety and security perimeter outside the nuclear installation for first responders during nuclear/radiological emergency based on dose rate, contamination level or distance from the scene. Separation of working zone is important for first responder safety that works in radiological environment in the event of nuclear or radiation emergency without violating their standard operating procedure. Value limit of safety and security perimeter has been made according to the conditions in Indonesia and considering the applicability in practical. (author)

Installation Restoration Program. Phase I. Records Search, Hazardous Materials Disposal Sites. Myrtle Beach Air Force Base, South Carolina.

Science.gov (United States)

1981-10-01

Figure 2.3, all of the taxiways were laid out in a dispersal pattern so as to minimize any direct hits on aircraft which were parked (See aerial...photograph in Appendix A, page A-i). Fueling areas were also dispersed as is indicated on Figure 2.3. During the winter of 1945 to 1946, the mission of...Middendorf Cross-bedded sands with lenses of sandy to (Tuscaloosa) 182 1,457 silty kaolin clays. Clays mottled from dark yellowish-orange to red and light

Find and neutralize clandestine nuclear weapons

International Nuclear Information System (INIS)

Canavan, G.H.

1997-09-01

The objective of finding nuclear material at entry portals is to provide a secure perimeter as large as a weapon damage radius so that operations could be conducted within it relatively unencumbered. The objective of wide area search for nuclear material to provide a safe zone of similar dimensions in an area in which it is not possible to maintain a secure perimeter, to provide assurance for civilians living at an area at risk, or to provide rapid, wide area search of regions that could conceal nuclear threats to forces in the field. This rapid, wide-area, and confident detection of nuclear materials is the essential first step in developing the ability to negate terrorist nuclear assemblies or weapons. The ability to detect and negate nuclear materials are necessary to prevent the forced, massive evacuation of urban populations or the disruption of military operations in response to terrorist threats. This paper describes the limitations to current sensors used for nuclear weapon detection and discusses a novel approach to nuclear weapon detection using a combination of directional information (imaging) and gamma ray energy (color) to produce a gamma ray color camera

THE EFFECT OF NON-ROUTINE GEOMETRY PROBLEM ON ELEMENTARY STUDENTS BELIEF IN MATHEMATICS: A CASE STUDY

Directory of Open Access Journals (Sweden)

Khoerul Umam

2018-03-01

Full Text Available Many learners hold traditional beliefs about perimeter and area that a shape with a larger area must have a larger perimeter while shape with the same perimeter must have the same area. To address this issue, non-routine geometry problem is given. This qualitative descriptive research used to reach the goal and to explore the effect of non-routine geometry problem on elementary student belief in mathematics. The instrument has been developed to accommodate intuitive student belief and student’s belief about the concept of perimeter. The results provide evidence that students’ intuitive belief about perimeter can be change through non-routine geometry problem which is required understanding and some mathematical analysis. Fortunately, the problem has helped the elementary students revise and correct their beliefs, thoughts, and understandings relating to the circumference of shape.

Odor-baited trap trees: a novel management tool for plum curculio (Coleoptera: Curculionidae).

Science.gov (United States)

Leskey, Tracy C; Piñero, Jaime C; Prokopy, Ronald J

2008-08-01

The plum curculio, Conotrachelus nenuphar (Herbst) (Coleoptera: Curculionidae), one of the most important pests of apple (Malus spp.) in eastern and central North America, historically has been managed in New England apple orchards by three full block insecticide applications. Efforts to reduce insecticide inputs against plum curculio include perimeter row sprays, particularly after petal fall, to control immigrating adults. The odor-baited trap tree approach represents a new reduced input strategy for managing plum curculio based on the application of insecticides to a few perimeter-row trap trees rather than the entire perimeter row or full orchard block. Here, we compared the efficacy of a trap tree approach with perimeter row treatments to manage populations after petal fall in commercial apple orchards in 2005 and 2006. Injury was significantly greater in trap trees compared with unbaited perimeter row treated trees in both years of the study. In 2005, heavy rains prevented growers from applying insecticide applications at regular intervals resulting in high injury in nearly all blocks regardless of type of management strategy. In 2006, both the trap-tree and perimeter-row treatments prevented penetration by immigrating populations and resulted in economically acceptable levels of injury. The trap tree management strategy resulted in a reduction of approximately 70% total trees being treated with insecticide compared with perimeter row sprays and 93% compared with standard full block sprays.

Photovoltaic module and laminate

Science.gov (United States)

Bunea, Gabriela E.; Kim, Sung Dug; Kavulak, David F.J.

2018-04-10

A photovoltaic module is disclosed. The photovoltaic module has a first side directed toward the sun during normal operation and a second, lower side. The photovoltaic module comprises a perimeter frame and a photovoltaic laminate at least partially enclosed by and supported by the perimeter frame. The photovoltaic laminate comprises a transparent cover layer positioned toward the first side of the photovoltaic module, an upper encapsulant layer beneath and adhering to the cover layer, a plurality of photovoltaic solar cells beneath the upper encapsulant layer, the photovoltaic solar cells electrically interconnected, a lower encapsulant layer beneath the plurality of photovoltaic solar cells, the upper and lower encapsulant layers enclosing the plurality of photovoltaic solar cells, and a homogenous rear environmental protection layer, the rear environmental protection layer adhering to the lower encapsulant layer, the rear environmental protection layer exposed to the ambient environment on the second side of the photovoltaic module.

Calendar Year 1999 Groundwater Monitoring Report for the Groundwater Protection Program, U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

2000-01-01

This report contains the calendar year (CY) 1999 groundwater and surface water quality monitoring data that were obtained at the US Department of Energy (DOE) Y-12 Plant in Oak Ridge, Tennessee, in accordance with the applicable requirements of DOE Order 5400.1. Groundwater and surface water quality monitoring for the purposes of DOE Order 5400.1, as defined in the Environmental Monitoring Plan for the Oak Ridge Reservation (DOE 1996), includes site surveillance monitoring and exit pathway/perimeter monitoring. Site surveillance monitoring is intended to provide data regarding groundwater/surface water quality in areas that are, or could be, affected by operations at the Y-12 Plant. Exit pathway/perimeter monitoring is intended to provide data regarding groundwater and surface water quality where contaminants from the Y-12 Plant are most likely to migrate beyond the boundaries of the DOE Oak Ridge Reservation (ORR)

In-Service Evaluation of the Dalmo Victor Active Beacon Collision Avoidance System (BCAS/TCAS).

Science.gov (United States)

1982-10-01

4W K x K K K K K -408 K K x 6 zaw . ZIN. a 2a 7 aimb Z770 2197W a LAPSED 9W CaC Fiur 5-12 CAS 11 AGRNGIAE N * a a UUUV4PLOTS 5-12 5.5 CASE 16, NORFOLK...sequent climb, and the minimzm range of 0.1 mile suggests an aircraft on a taxiway near the runway. B-43 TMDR x TUN 146 1200 46 - LAP6O TIM CSErcs 3-44 m

Diferentes aferições do diâmetro abdominal sagital e do perímetro da cintura na predição do HOMA-IR Mediciones distintas del diámetro abdominal sagital y del perímetro de la cintura en la predicción del HOMA-IR Different measurements of the sagittal abdominal diameter and waist perimeter in the prediction of HOMA-IR

Directory of Open Access Journals (Sweden)

Ana Carolina Junqueira Vasques

2009-11-01

umbilical, menor cintura, inmediatamente superior a la cresta ilíaca y punto promedio entre la cresta ilíaca y la última costilla se calcularon en cuatro locales diferentes. La resistencia a la insulina se evaluó por el índice HOMA-IR. RESULTADOS: Todas las mediciones presentaron correlación intraclase de 0,986-0,999. Tanto el diámetro abdominal sagital calculado en la menor cintura (r=0,482 y AUC=0,739±0,049 como el perímetro de la cintura calculado en el punto promedio entre la última costilla y la cresta ilíaca (r=0,464 e AUC=0,746±0,05 presentaron mayores correlaciones con el HOMA-IR, así como un mejor poder discriminante para el HOMA-IR según el análisis ROC (pBACKGROUND: The correlation between the increase in visceral fat and insulin resistance makes the sagittal abdominal diameter and the waist perimeter as potential tools for the prediction of insulin resistance. OBJECTIVE: To assess the reproducibility of different measurements of the sagittal abdominal diameter and the waist perimeter and analyze the discriminating power of the measurements when predicting insulin resistance. METHODS: A total of 190 adult males were studied. The sagittal abdominal diameter (smallest girth, larger abdominal diameter, umbilical level and midpoint between the iliac crests and the waist perimeter (umbilical level, smallest girth, immediately above the iliac crest and midpoint between the iliac crest and the last rib were measured at four different sites. Insulin resistance was assessed by the homeostasis model of assessment-insulin resistance (HOMA-IR index. RESULTS: All measurements presented an intraclass correlation of 0.986-0.999. The sagittal abdominal diameter measured at the smallest girth (r=0.482 and AUC=0.739±0.049 and the waist perimeter measured at the midpoint between the last rib and the iliac crest (r=0.464 and AUC=0.746±0.05 presented the highest correlations with the HOMA-IR and the best discriminating power for HOMA-IR according to the ROC analysis

Flying personal planes: modeling the airport choices of general aviation pilots using stated preference methodology.

Science.gov (United States)

Camasso, M J; Jagannathan, R

2001-01-01

This study employed stated preference (SP) models to determine why general aviation pilots choose to base and operate their aircraft at some airports and not others. Thirteen decision variables identified in pilot focus groups and in the general aviation literature were incorporated into a series of hypothetical choice tasks or scenarios. The scenarios were offered within a fractional factorial design to establish orthogonality and to preclude dominance in any combination of variables. Data from 113 pilots were analyzed for individual differences across pilots using conditional logit regression with and without controls. The results demonstrate that some airport attributes (e.g., full-range hospitality services, paved parallel taxiway, and specific types of runway lighting and landing aids) increase pilot utility. Heavy airport congestion and airport landing fees, on the other hand, decrease pilot utility. The importance of SP methodology as a vehicle for modeling choice behavior and as an input into the planning and prioritization process is discussed. Actual or potential applications include the development of structured decision-making instruments in the behavioral sciences and in human service programs.

Methods for determining unimpeded aircraft taxiing time and evaluating airport taxiing performance

Directory of Open Access Journals (Sweden)

Yu Zhang

2017-04-01

Full Text Available The objective of this study is to improve the methods of determining unimpeded (nominal taxiing time, which is the reference time used for estimating taxiing delay, a widely accepted performance indicator of airport surface movement. After reviewing existing methods used widely by different air navigation service providers (ANSP, new methods relying on computer software and statistical tools, and econometrics regression models are proposed. Regression models are highly recommended because they require less detailed data and can serve the needs of general performance analysis of airport surface operations. The proposed econometrics model outperforms existing ones by introducing more explanatory variables, especially taking aircraft passing and over-passing into the considering of queue length calculation and including runway configuration, ground delay program, and weather factors. The length of the aircraft queue in the taxiway system and the interaction between queues are major contributors to long taxi-out times. The proposed method provides a consistent and more accurate method of calculating taxiing delay and it can be used for ATM-related performance analysis and international comparison.

Environmental monitoring in the vicinity of the Savannah River Plant. Annual report, 1977

International Nuclear Information System (INIS)

1977-01-01

The concentration of radioactivity added by the Savannah River Plant operations to the environs during 1977 was, for the most part, too small to be distinguished from natural background radiation and fallout from worldwide nuclear weapon tests. Beta activity in particulate air filters was about two times the 1976 level and was due entirely to global fallout. Tritium oxide in air at the plant perimeter was greater than in air at more distant locations; the average concentration at the plant perimeter (65 pCi/m 3 ) was 0.03% of the Concentration Guide (CG). Tritium, 137 Cs, and 90 Sr were the only radionuclides of plant origin detectable in Savannah River water by routine analyses. None of these had an average concentration exceeding 0.2% of the CG in river water sampled 8 mi downstream from the plant. The tritium concentration in river water immediately downstream of the plant (4.8 pCi/ml, including 0.5 pCi/ml background river contribution) represented the highest CG percentage (0.16) of the three radionuclides measured in river water. Special research programs using ultra-low-level techniques may detect trace quantities of other radionuclides of plant origin. Radioactive materials in river fish also continued very low (0.2 pCi/g 137 Cs maximum). Annual analyses of plant perimeter soil samples 0-5 cm deep) showed deposition of 137 Cs (52 mCi/km 2 ) and 239 Pu (1.2 mCi/km 2 ) within the range normally found in global fallout. 238 Pu in all soil samples was near the sensitivity of the analysis (approximately 0.1 mCi/km 2 ). For 1977, the calculated annual average dose from atmospheric releases of radioactive materials from SRP was 0.8 millirem (mrem) at the plant perimeter

Environmental monitoring in the vicinity of the Savannah River Plant. Annual report for 1978

International Nuclear Information System (INIS)

1979-01-01

The radiation dose at the plant perimeter or the population dose in the region from SRP operations is very small relative to the dose received from naturally occurring radiation. The annual average dose in 1978 from atmospheric releases of radioactive materials from SRP was 0.76 millirem (mrem) at the plant perimeter (approximately 1% of natural background). The maximum dose at the plant perimeter was 1.05 mrems, which is 0.2% of the Department of Energy limit for offsite exposures. The total radiation exposure at the plant perimeter from SRP releases and natural background radiation (98 mrems) was substantially less than the exposure of a person living in Columbia, SC (111 mrems), or Atlanta, GA (124 mrems). These differences are due to variation in natural radiation. The population dose to people living within 80 km (50 mi) of the center of SRP (population: 465,000) was 110 man-rems. During 1978, this same population received a radiation dose of 54,400 man-rems from natural radiation and an additional dose of 47,000 man-rems from medical x rays. An individual consuming river water downstream from SRP would receive a maximum calculated dose of 0.32 mrem. Air and water are the major dispersal media for radioactive emissions. Samples representing most segments of the environment that may conceivably be affected by these emissions were monitored to ensure a safe environment. Releases of radioactivity from SRP had very small effect on living plants and animals and were too minute to be detectable, and with a few exceptions, concentrations outside the plant boundary were too low to distinguish from the natural radioactive background and continuing worldwide fallout from nuclear weapons tests

Neuropathies of the optic nerve and visual evoked potentials with special reference to color vision and differential light threshold measured with the computer perimeter OCTOPUS.

Science.gov (United States)

Wildberger, H

1984-10-31

The contrast evoked potentials (VEPs) to different check sizes were recorded in about 200 cases of discrete optic neuropathies (ON) of different origin. Differential light threshold (DLT) was tested with the computer perimeter OCTOPUS. Saturated and desaturated tests were applied to evaluate the degree of acquired color vision deficiency. Delayed VEP responses are not confined to optic neuritis (RBN) alone and the different latency times obtained from other ON are confluent. The delay may be due to demyelination, to an increasing dominance of paramacular VEP subcomponents or to an increasing dominance of the upper half-field responses. Recording with smaller check sizes has the advantage that discrete dysfunctions in the visual field (VF) center are more easily detected: a correlation between amplitudes and visual acuity is best in strabismic amblyopias, is less expressed in maculopathies of the retina and weak in ON. The absence or reduction of amplitudes to smaller check sizes, however, is an important indication of a disorder in the VF center of ON in an early or recovered stage. Acquired color vision defects of the tritan-like type are more confined to discrete ON, whereas the red/green type is reserved to more severe ON. The DLT of the VF center is reduced in a different, significant and non significant extent in discrete optic neuropathies and the correlation between DLT and visual acuity is weak. A careful numerical analysis is needed in types of discrete ON where the central DLT lies within normal statistical limits: a side difference of the DLT between the affected and the normal fellow eye is always present. Evaluation of visual fatigue effects and of the relative sensitivity loss of VF center and VF periphery may provide further diagnostic information.

Environmental monitoring in the vicinity of the Savannah River Plant. Annual report, 1980

International Nuclear Information System (INIS)

1980-01-01

An extensive surveillance program has been continuously maintained since 1951 to determine the concentrations of radonuclides in a 1200-square-mile area in the environs of the plant and the radiation exposure of the population resulting from SRP operations. The results of this monitoring program are reported annually to the public. This document summarizes the 1980 results. The radiation dose at the plant perimeter and the population dose in the region from SRP operations is very small relative to the dose received from naturally occurring radiation. The annual average dose in 1980 from atmospheric releases of radioactive materials from SRP was 0.7 millirem at the plant perimeter. The maximum dose at the plant perimeter was 1.01 mrem, which is 0.2% of the Department of Energy limit for offsite exposures. The population dose to people living within 80 km of the center of SRP was 99.7 man-rems. During 1980, this same population received a radiation dose of 54,400 man-rems from natural radiation and an additional dose of 47,000 man-rems from medical x-rays. An individual consuming river water downstream from SRP would receive a maximum calculated dose in 1980 of 0.22 mrem which includes dose contributions from consumer products produced using Savannah River water. Air and water are the major dispersal media for radioactive emissions. Samples representing most segments of the environment that may conceivably be affected by these emissions were monitored to ensure a safe environment. Releases of radioactivity from SRP had an inconsequential effect on living plants and animals. With a few exceptions, concentrations outside the plant boundary were too low to distinguish from the natural radioactive background and continuing worldwide fallout from nuclear weapons tests

Development of Earthquake Emergency Response Plan for Tribhuvan International Airport, Kathmandu, Nepal

Science.gov (United States)

2013-02-01

Prince, Haiti. The consequences for Nepal if a comparable or bigger disaster happens in Kathmandu would likely be worse than in Port–au-Prince because the...procedures adopted in other countries. The framework was made compatible with ICAO standards and TIA’s current existing emergency plan for other...Flight Rules (VFR) in daylight and Instrument Flight Rule ( IFR ). A. Restore Airport Perimeter Security B. Restore Flight Operations a

Environmental Assessment: Zebra Mussel Eradication from the Base Lake at Offutt Air Force Base

Science.gov (United States)

2008-09-11

lake perimeter roadway and landward. Access to the F AMCAMP, pavi lion , and boathouse would be allowed during the application. Warning sit,Yfls...2.5 microns or smaller ppm parts per million SGNIS Sea Grant Non-indigenous Species Site T&E Threatened and Endangered TEC The Environmental...chemical tool in freshwater farm ponds and aquaculture operations, including open water systems. It is both an effective algaecide and a parasite

Ambient environmental radiation monitoring at the Lawrence Livermore Laboratory

International Nuclear Information System (INIS)

Lindeken, C.L.; White, J.H.; Toy, A.J.; Sundbeck, C.W.

1975-01-01

Thermoluminescence dosimetry is the principal means of measuring ambient γ radiation at the Lawrence Livermore Laboratory. These dosimeters are used at 12 perimeter locations and 41 locations in the off-site vicinity of the Laboratory, and are exchanged quarterly. Control dosimeters are stored in a 75-mm-thick lead shield located out-of-doors to duplicate temperature cycling of field dosimeters. Effect of dosimeter response to radiation in the shield is determined each quarter. Calibration irradiations are made midway through the exposure cycle to compensate for signal fading. Terrestrial exposure rates calculated from the activities of naturally occurring uranium, thorium, and potassium in Livermore Valley soils vary from 3 to 7 μR/hr. Local inferred exposure rates from cosmic radiation are approximately 4 μR/hr. TLD measurements are in good agreement with these data. Off-site and site perimeter data are compared, and differences related to Laboratory operations are discussed

Aircraft Weather Mitigation for the Next Generation Air Transportation System

Science.gov (United States)

Stough, H. Paul, III

2007-01-01

Atmospheric effects on aviation are described by Mahapatra (1999) as including (1) atmospheric phenomena involving air motion - wind shear and turbulence; (2) hydrometeorological phenomena - rain, snow and hail; (3) aircraft icing; (4) low visibility; and (5) atmospheric electrical phenomena. Aircraft Weather Mitigation includes aircraft systems (e.g. airframe, propulsion, avionics, controls) that can be enacted (by a pilot, automation or hybrid systems) to suppress and/or prepare for the effects of encountered or unavoidable weather or to facilitate a crew operational decision-making process relative to weather. Aircraft weather mitigation can be thought of as a continuum (Figure 1) with the need to avoid all adverse weather at one extreme and the ability to safely operate in all weather conditions at the other extreme. Realistic aircraft capabilities fall somewhere between these two extremes. The capabilities of small general aviation aircraft would be expected to fall closer to the "Avoid All Adverse Weather" point, and the capabilities of large commercial jet transports would fall closer to the "Operate in All Weather Conditions" point. The ability to safely operate in adverse weather conditions is dependent upon the pilot s capabilities (training, total experience and recent experience), the airspace in which the operation is taking place (terrain, navigational aids, traffic separation), the capabilities of the airport (approach guidance, runway and taxiway lighting, availability of air traffic control), as well as the capabilities of the airplane. The level of mitigation may vary depending upon the type of adverse weather. For example, a small general aviation airplane may be equipped to operate "in the clouds" without outside visual references, but not be equipped to prevent airframe ice that could be accreted in those clouds.

Considerations on safeguards approach for small centrifuge enrichment facilities

International Nuclear Information System (INIS)

Vicens, Hugo E.; Marzo, Marco A.; Nunes, Vitorio E.

2004-01-01

The safeguards' objectives for enrichment facilities encompass the detection of the diversion of declared nuclear material and of facility misuse. The safeguard's approach presently applied for commercial centrifuge enrichment facilities is based on the Hexa partite Project and seems not to be directly applicable to cases of small plants. Since ABACC started its operation one of the main problems faced was the application of safeguards to small centrifuge enrichment plants for testing centrifuges in cascade mode or for small LEU production. These plants consist of a few fully independent cascades, does not operate in a routine basis and panels prevent visual access to the centrifuges and their surroundings for preserving sensitive information. For such plants misuse scenarios seems to dominate, particularly those associated with feeding the plant with undeclared LEU. This paper presents a concise analysis of misuse strategies in small centrifuge facility and alternative safeguard's approach, describing the main control elements to be applied. The particularities arising from the existence of panels or boxes covering the centrifuges are specifically addressed. Two alternatives approaches based on the application of a transitory perimeter control to increase the effectiveness of unannounced inspection and on the application of permanent perimeter control are presented. (author)

Canadian institute honours Hawking

Science.gov (United States)

Durrani, Matin

2009-11-01

The Perimeter Institute for Theoretical Physics in Waterloo, Canada, has announced that a major new extension to its campus will be known as the Stephen Hawking Centre. The extension, which is currently being built, is due to open in 2011 and will double the size of the institute. It will also provide a home for the institute's Masters students, the first of whom joined the Perimeter Institute this autumn as part of its Perimeter Scholars international programme.

75 FR 39544 - Disease, Disability, and Injury Prevention and Control

Science.gov (United States)

2010-07-09

..., 2010 (Closed). Place: The W Atlanta Hotel-Perimeter, Perimeter Center West, Atlanta, Georgia 30346..., Management Analysis and Services Office, CDC, pursuant to Section 10(d) of Public Law 92-463. Matters To Be...

Efeitos da seleção para peso pós-desmame sobre medidas corporais e perímetro escrotal de machos Nelore de Sertãozinho (SP Effects of post-weaning weight selection on body measurements and scrotal perimeter in Nellore males of Sertãozinho (SP

Directory of Open Access Journals (Sweden)

Joslaine Noely dos Santos Gonçalves Cyrillo

2000-04-01

Full Text Available O objetivo deste estudo foi avaliar o efeito indireto da seleção para peso pós-desmame sobre medidas corporais e perímetro escrotal de 809 machos Nelore, pertencentes às populações selecionadas (NeS e NeT e controle (NeC, da Estação Experimental de Zootecnia de Sertãozinho. As análises estatísticas foram executadas usando-se modelos de touros, sendo que a fonte de variação aleatória, touro, foi aninhada dentro de rebanho. Os efeitos fixos considerados foram: rebanho, ano de realização da Prova de Ganho de Peso (PGP, idade de vaca em anos e idade do animal em dias como covariável. A mudança genética, obtida como a diferença dos rebanhos selecionados em relação ao rebanho controle, foi 40,2 e 44,3 kg, para peso aos 378 dias (P378, para os rebanhos NeS e NeT, respectivamente. As mudanças para as demais características, na mesma ordem, foram 4,5 e 4,5 cm para altura na garupa (ATPF; 6,2 e 7,0 cm para perímetro torácico (PTOR; 5,8 e 6,3 cm para comprimento do corpo (COM; 2,9 e 2,0 cm para comprimento do dorso (DOR; 1,7 e 2,4 cm para comprimento da garupa, (GAR; 1,0 e 1,3 cm para distância de ísquios (ISQ; 1,8 e 2,6 cm para distância de íleos (ILEO; e 1,3 e 2,2 cm para perímetro escrotal (PE. Os resultados deste estudo mostraram que a seleção direta para peso pós-desmame promoveu respostas positivas correlacionadas nas dimensões de regiões do corpo de machos Nelore.The objective of this study was to evaluate the indirect effects of selection for post-weaning weight on body measures and scrotal perimeter of 809 Nellore males from selected herds (NeS and NeT and control herd (NeC, of the Estação Experimental de Zootecnia de Sertãozinho. The statistical analyses were performed by using a sire mixed model where the random source of variation, sires, was nested within herds. The fixed effects were herds, year of performance test (PGP, age of cow and age of the animal as a covariate. The average genetic change for

Degradation of reactive blue 13 using hydrodynamic cavitation: Effect of geometrical parameters and different oxidizing additives.

Science.gov (United States)

Rajoriya, Sunil; Bargole, Swapnil; Saharan, Virendra Kumar

2017-07-01

Decolorization of reactive blue 13 (RB13), a sulphonated azo dye, was investigated using hydrodynamic cavitation (HC). The aim of research article is to check the influence of geometrical parameters (total flow area, the ratio of throat perimeter to its cross-sectional area, throat shape and size, etc.) and configuration of the cavitating devices on decolorization of RB13 in aqueous solution. For this purpose, eight cavitating devices i.e. Circular and slit venturi, and six orifice plates having different flow area and perimeter were used in the present work. Initially, the effects of various operating parameters such as solution pH, initial dye concentration, operating inlet pressure and cavitation number on the decolorization of RB13 have been investigated, and the optimum operating conditions were found. Kinetic analysis revealed that the decolorization and mineralization of RB13 using HC followed first order reaction kinetics. Almost 47% decolorization of RB13 was achieved using only HC with slit venturi as a cavitating device at an optimum inlet pressure of 0.4MPa and pH of the solution as 2.0. It has been found that in case of orifice plates, higher decolorization rate of 4×10 -3 min -1 was achieved using orifice plate 2 (OP2) which is having higher flow area and perimeter (α=2.28). The effect of process intensifying agents (hydrogen peroxide and ferrous sulphate) and different gaseous additives (oxygen and ozone) on the extent of decolorization of RB13 were also examined. Almost 66% decolorization of RB13 was achieved using HC combined with 2Lmin -1 of oxygen and in combination with ferrous sulphate (1:3). Nearly 91% decolorization was achieved using HC combined with H 2 O 2 at an optimum molar ratio (dye:H 2 O 2 ) of 1:20 while almost complete decolorization was observed in 15min using a combination of HC and ozone at 3gh -1 ozone feed rate. Maximum 72% TOC was removed using HC coupled with 3gh -1 ozone feed rate. Copyright © 2017 Elsevier B.V. All

Bangor International/Dow AFB, Maine. Revised Uniform Summary of Surface Weather Observations (RUSSWO). Parts A-F.

Science.gov (United States)

1981-11-06

temporary site at ground GM1-1l RO-2 Surfac level in ramp area. 6 Apr 60 Located approx 200 ft from corner Same RO-2A 13 ft of old rnwy 33 taxiway and...USAF STAC . 0-14-S( OL A) ............ . . .T... ..O . PORN ... 17- GLCPAL CLIMATOLOGY 9RANCH ArETAC CEILING VERSUS VISIBILITY Alq WEATHEk SERVICL/4AC S...13.1 i ?6 6.. 5918 USAFETAC PORN 0.9.5 (OL.-) PFVIOUS EDITIONS OF TnIS FORM AIRE ORSOLTE Jut 64 GLCRAL CLIMAT0L.i Y 1 ANCH AFE T AC SKYCO E A>4 4ATHER

A Survey on Operator Monotonicity, Operator Convexity, and Operator Means

Directory of Open Access Journals (Sweden)

Pattrawut Chansangiam

2015-01-01

Full Text Available This paper is an expository devoted to an important class of real-valued functions introduced by Löwner, namely, operator monotone functions. This concept is closely related to operator convex/concave functions. Various characterizations for such functions are given from the viewpoint of differential analysis in terms of matrix of divided differences. From the viewpoint of operator inequalities, various characterizations and the relationship between operator monotonicity and operator convexity are given by Hansen and Pedersen. In the viewpoint of measure theory, operator monotone functions on the nonnegative reals admit meaningful integral representations with respect to Borel measures on the unit interval. Furthermore, Kubo-Ando theory asserts the correspondence between operator monotone functions and operator means.

78 FR 63475 - Ocean Transportation Intermediary License Applicants

Science.gov (United States)

2013-10-24

... dba Fachel Shipping & Logistics (NVO & OFF), 6331 Belair Road, Baltimore, MD 21206, Officers: Chinyere W. Osasuyi, Chief Executive Manager (QI), Famous I. Osasuyi, Chief Executive Member. Application... Change. Perimeter International dba Perimeter Logistics (NVO & OFF), 2700 Story Road, Suite 150, Irving...

Idle reduction programs and potential benefits to schools

Science.gov (United States)

2010-11-01

School districts in Texas and many other states have, in recent years, increased the walk zones : surrounding schools to a 2-mile perimeter. Inside this perimeter, either no school bus service is : offered, or service is offered only with a fee...

Overview of electrical energy November 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development of wind generation in France, Development of extractions by large-scale industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for November 2009. (J.S.)

Overview of electrical energy October 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development of wind generation in France, Development of extractions by large-scale industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for October 2009. (J.S.)

Overview of electrical energy January 2010

International Nuclear Information System (INIS)

2010-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development in the balance of physical exchanges, Development of extractions by heavy industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for January 2010. (J.S.)

Overview of electrical energy December 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development in the balance of physical exchanges, Development of extractions by heavy industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for December 2009. A 2009 provisional balance of electrical energy in France is given in appendix. (J.S.)

Overview of electrical energy September 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development of wind generation in France, Development of extractions by large-scale industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for September 2009. (J.S.)

Overview of electrical energy August 2009

International Nuclear Information System (INIS)

2009-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development of wind generation in France, Development of extractions by large-scale industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for August 2009. (J.S.)

Overview of electrical energy in February 2010

International Nuclear Information System (INIS)

2010-01-01

The purpose of this report is to provide information on the results of operation of the French public transmission network and power system during the past month. Information comes from different sources: electricity generators, ERDF, METEOFRANCE, RTE. The information provided concerns: - the internal electricity consumption (perimeter France), Results at end of past month and Cumulative trend over last 12 months; - the balance of electrical energy in France: Results at end of past month (net generation by source, gross national consumption - End customers connected to the RTE network and Other customers and losses on all networks); Development in the balance of physical exchanges, Development of extractions by heavy industry; - the extreme values for consumption, exchanges (perimeter France, past month and Last 12 months); - the electricity market mechanisms: contractual cross-border electricity exchanges (exports, imports, cumulative total, export balance); balancing mechanism - balance responsible entities; Exchanges between Balance Responsible entities via block exchange notifications; notification of new installations for transmission network development. This document presents the above information for February 2010. (J.S.)

Investigating fire emissions and smoke transport during the Summer of 2013 using an operational smoke modeling system and chemical transport model

Science.gov (United States)

ONeill, S. M.; Chung, S. H.; Wiedinmyer, C.; Larkin, N. K.; Martinez, M. E.; Solomon, R. C.; Rorig, M.

2014-12-01

Emissions from fires in the Western US are substantial and can impact air quality and regional climate. Many methods exist that estimate the particulate and gaseous emissions from fires, including those run operationally for use with chemical forecast models. The US Forest Service Smartfire2/BlueSky modeling framework uses satellite data and reported information about fire perimeters to estimate emissions of pollutants to the atmosphere. The emission estimates are used as inputs to dispersion models, such as HYSPLIT, and chemical transport models, such as CMAQ and WRF-Chem, to assess the chemical and physical impacts of fires on the atmosphere. Here we investigate the use of Smartfire2/BlueSky and WRF-Chem to simulate emissions from the 2013 fire summer fire season, with special focus on the Rim Fire in northern California. The 2013 Rim Fire ignited on August 17 and eventually burned more than 250,000 total acres before being contained on October 24. Large smoke plumes and pyro-convection events were observed. In this study, the Smartfire2/BlueSky operational emission estimates are compared to other estimation methods, such as the Fire INventory from NCAR (FINN) and other global databases to quantify variations in emission estimation methods for this wildfire event. The impact of the emissions on downwind chemical composition is investigated with the coupled meteorology-chemistry WRF-Chem model. The inclusion of aerosol-cloud and aerosol-radiation interactions in the model framework enables the evaluation of the downwind impacts of the fire plume. The emissions and modeled chemistry can also be evaluated with data collected from the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) aircraft field campaign, which intersected the fire plume.

Operator theory, operator algebras and applications

CERN Document Server

Lebre, Amarino; Samko, Stefan; Spitkovsky, Ilya

2014-01-01

This book consists of research papers that cover the scientific areas of the International Workshop on Operator Theory, Operator Algebras and Applications, held in Lisbon in September 2012. The volume particularly focuses on (i) operator theory and harmonic analysis (singular integral operators with shifts; pseudodifferential operators, factorization of almost periodic matrix functions; inequalities; Cauchy type integrals; maximal and singular operators on generalized Orlicz-Morrey spaces; the Riesz potential operator; modification of Hadamard fractional integro-differentiation), (ii) operator algebras (invertibility in groupoid C*-algebras; inner endomorphisms of some semi group, crossed products; C*-algebras generated by mappings which have finite orbits; Folner sequences in operator algebras; arithmetic aspect of C*_r SL(2); C*-algebras of singular integral operators; algebras of operator sequences) and (iii) mathematical physics (operator approach to diffraction from polygonal-conical screens; Poisson geo...

Environmental monitoring in the vicinity of the Savannah River Plant. Annual report, 1976

International Nuclear Information System (INIS)

1976-01-01

A continuous monitoring program has been maintained since 1951 (before plant start-up) to determine concentrations of radioactive materials in a 1200-square-mile area outside SRP. Although some gaseous and liquid radioactive materials are discharged from SRP operations, concentrations and doses to the surrounding population continued to be far below levels considered significant from a public health viewpoint. The concentration of radioactivity added by SRP to its environs during 1976 was too small to be distinguished from natural background radiation and fallout from worldwide nuclear weapons tests. Beta activity in particulate air filters was about 1.5 times the 1975 level and was due entirely to global fallout. This concentration, both at the plant perimeter and 25 miles away (0.07 pCi/m 3 ), represents 0.07% of the Concentration Guide (CG) (defined in the Applicable Standards section which follows). Tritium oxide in air at the plant perimeter was greater than in air at more distant locations; the average concentration at the plant perimeter (50 pCi/m 3 ) was less than 0.1 of the Concentration Guide. Tritium, cesium-137, and strontium-90 were the only radionuclides of plant origin detectable in river water by routine analyses.Special research programs using ultra-low-level techniques have detected trace quantities of other radionuclides of plant origin. Radioactive materials in river fish also continued very low. Monitoring in a five-square-mile swamp bordering the Savannah River immediately below the SRP boundary has shown radioactivity (primarily cesium-137) above the natural background level in soil and vegetation

Microstructured optical fibers for gas sensing systems

Science.gov (United States)

Challener, William Albert; Choudhury, Niloy; Palit, Sabarni

2017-10-17

Microstructured optical fiber (MOF) includes a cladding extending a length between first and second ends. The cladding includes an inner porous microstructure that at least partially surrounds a hollow core. A perimeter contour of the hollow core has a non-uniform radial distance from a center axis of the cladding such that first segments of the cladding along the perimeter contour have a shorter radial distance from the center axis relative to second segments of the cladding along the perimeter contour. The cladding receives and propagates light energy through the hollow core, and the inner porous microstructure substantially confines the light energy within the hollow core. The cladding defines at least one port hole that extends radially from an exterior surface of the cladding to the hollow core. Each port hole penetrates the perimeter contour of the hollow core through one of the second segments of the cladding.

Department of Defense Expenditure Plans

Science.gov (United States)

2009-03-20

317 Aberdeen Proving Ground MD Replace Windows and Renovate Lounge Area, 4508 700 B 318 Aberdeen Proving Ground MD Replace Three Boilers, 525 500 E ...Rt 235 630 O 1137 Wright Patterson AFB OH Replace Perimeter Fence - Gate 26c Along E Bank of Mad River 644 O 1138 Wright Patterson AFB OH Replacec...Energy E Roofs R Utilities U Pavement/roads/grounds P Barracks B Quality of Life Q Operations O Medical M Family Housing F American Recovery and

Savannah River Plant remote environmental monitoring system

International Nuclear Information System (INIS)

Schubert, J.F.

1987-01-01

The SRP remote environmental monitoring system consists of separations facilities stack monitors, production reactor stack monitors, twelve site perimeter monitors, river and stream monitors, a geostationary operational environmental satellite (GOES) data link, reactor cooling lake thermal monitors, meteorological tower system, Weather Information and Display (WIND) system computer, and the VANTAGE data base management system. The remote environmental monitoring system when fully implemented will provide automatic monitoring of key stack releases and automatic inclusion of these source terms in the emergency response codes

Deny-by-Default Distributed Security Policy Enforcement in Mobile Ad Hoc Networks

Science.gov (United States)

Alicherry, Mansoor; Keromytis, Angelos D.; Stavrou, Angelos

Mobile Ad-hoc Networks (MANETs) are increasingly employed in tactical military and civil rapid-deployment networks, including emergency rescue operations and ad hoc disaster-relief networks. However, this flexibility of MANETs comes at a price, when compared to wired and base station-based wireless networks: MANETs are susceptible to both insider and outsider attacks. This is mainly because of the lack of a well-defined defense perimeter preventing the effective use of wired defenses including firewalls and intrusion detection systems.

MULTIFUNCTIONAL LAND USE IN THE RENEWAL OF HARBOUR AREAS: PATTERNS OF PHYSICAL DISTRIBUTION OF THE URBAN FUNCTIONS

Directory of Open Access Journals (Sweden)

Antoni Remesar

2004-09-01

Full Text Available Being one of the most representative spatial processes of the last 30 years, which frequently occur in strategic parts of the cities and justify special financing investments, the operations of renewal of harbour areas can be seen as a laboratory of contemporary urban design. In the context of the activity developed by the IFHP Working Party on Multifunctional and Intensive Land Use, these operations are also an high potential field of research, justifying its closer analysis, as it has been done in the last two years with the technical visits to Amsterdam, Rotterdam, Oslo, and now to Barcelona. Focusing on the multifunctional use of spaces, this paper analyses several operations of renewal of harbour areas, trying to identify the urban design solutions adopted in those operations regarding the physical distribution of the proposed urban functions. The case-study comparative analysis is the applied method, based on which are identified: (1 the different urban functions present on these operations, and; (2 the concept under which these different functions are disposed in the area and combined between themselves. The hypothesis is that it can be established a general classification on the forms how different functions are combined in these operations. The paper previously distinguishes two types of functions, regarding the relative its importance in the area: the dominant urban functions and the located urban functions. The dominant urban functions are those functions that generally dominate an urban area, although it can contain located urban functions within its perimeter on specific locations, e.g., residential areas, offices and shopping areas, industrial areas, public equipment areas and special use areas. The located urban functions are those specific functions that aren’t dominating functions and exist within the perimeter of a dominant urban function, e.g., schools, museums, public services, local shopping’s and others. The papers

An evaluation of rapid methods for monitoring vegetation characteristics of wetland bird habitat

Science.gov (United States)

Tavernia, Brian G.; Lyons, James E.; Loges, Brian W.; Wilson, Andrew; Collazo, Jaime A.; Runge, Michael C.

2016-01-01

Wetland managers benefit from monitoring data of sufficient precision and accuracy to assess wildlife habitat conditions and to evaluate and learn from past management decisions. For large-scale monitoring programs focused on waterbirds (waterfowl, wading birds, secretive marsh birds, and shorebirds), precision and accuracy of habitat measurements must be balanced with fiscal and logistic constraints. We evaluated a set of protocols for rapid, visual estimates of key waterbird habitat characteristics made from the wetland perimeter against estimates from (1) plots sampled within wetlands, and (2) cover maps made from aerial photographs. Estimated percent cover of annuals and perennials using a perimeter-based protocol fell within 10 percent of plot-based estimates, and percent cover estimates for seven vegetation height classes were within 20 % of plot-based estimates. Perimeter-based estimates of total emergent vegetation cover did not differ significantly from cover map estimates. Post-hoc analyses revealed evidence for observer effects in estimates of annual and perennial covers and vegetation height. Median time required to complete perimeter-based methods was less than 7 percent of the time needed for intensive plot-based methods. Our results show that rapid, perimeter-based assessments, which increase sample size and efficiency, provide vegetation estimates comparable to more intensive methods.

Airport Perimeter Security Advisor, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The aviation system of the United States of America is one of our national treasures. Very few elements of our culture capture the America spirit like aviation. Air...

Historical Fire Perimeters (2000 to 2011)

Data.gov (United States)

Department of Homeland Security — The Geospatial Multi-Agency Coordination Group, or GeoMAC, is an internet-based mapping tool originally designed for fire managers to access online maps of current...

Rules relative to:; Regles relatives au dispositif de responsable d'equilibre, au mecanisme d'ajustement et a la programmation

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-02-01

criterion and by taking into account the technical constraints expressed by the partners. The setting up of an open balancing mechanism in France is a major contribution to the construction of the European internal electricity market. This document presents the rules concerning the balance responsible scheme, the balancing mechanism and programming: 1 - definitions; 2 -general conditions (object, participation conditions, conditions for amendment of the rules, access to RTE's information system, financial provisions, bank guarantee, assignment of rights and obligations, intellectual property, confidentiality, force majeure, responsibility, cancellation of the participation agreement, notification and operational exchange conditions, rounding rules, territorial application of rules, applicable language and law, settlement of disputes); 3 - balance responsible entity system (balance responsible perimeter, metering and detailed data of extractions from and injections into the perimeter, calculation methods, informing the balance responsible entity of detailed data and imbalances, financial conditions); 5 - block exchange service (object and prior conditions, declaration procedure in normal mode, declaration procedure in downgraded mode); 6 - balancing mechanism (prior conditions, balancing perimeter, characteristics of balancing offer, chronological progress of balancing offers (until acceptance), use of balancing offers by RTE, implementation of balancing orders by the balancing actor, valuation of balancing offers, information provided by the balancing actor, verifying implementation of balancing orders and penalties, operating in downgraded mode, balancing mechanism public indicators); 7 - programming (perimeter, operational exchanges, generation programming, consumption programming). 26 appendixes complete the document.

Applications of image analysis in the characterization of Streptomyces olindensis in submerged culture

Directory of Open Access Journals (Sweden)

Pamboukian Celso R. Denser

2002-01-01

Full Text Available The morphology of Streptomyces olindensis (producer of retamycin, an antitumor antibiotic grown in submerged culture was assessed by image analysis. The morphology was differentiated into four classes: pellets, clumps (or entangled filaments, branched and unbranched free filaments. Four morphological parameters were initially considered (area, convex area, perimeter, and convex perimeter but only two parameters (perimeter and convex perimeter were chosen to automatically classify the cells into the four morphological classes, using histogram analysis. Each morphological class was evaluated during growth carried out in liquid media in fermenter or shaker. It was found that pellets and clumps dominated in early growth stages in fermenter (due to the inoculum coming from a shaker cultivation and that during cultivation, the breakage of pellets and clumps caused an increase in the percentage of free filaments. The criteria of morphological classification by image analysis proposed were useful to quantify the percentage of each morphological class during fermentations and may help to establish correlations between antibiotic production and microorganism morphology.

Public involvement in environmental surveillance at Hanford

International Nuclear Information System (INIS)

Hanf, R.W. Jr.; Patton, G.W.; Woodruff, R.K.; Poston, T.M.

1994-08-01

Environmental surveillance at the Hanford Site began during the mid-1940s following the construction and start-up of the nation's first plutonium production reactor. Over the past approximately 45 years, surveillance operations on and off the Site have continued, with virtually all sampling being conducted by Hanford Site workers. Recently, the US Department of Energy Richland Operations Office directed that public involvement in Hanford environmental surveillance operations be initiated. Accordingly, three special radiological air monitoring stations were constructed offsite, near hanford's perimeter. Each station is managed and operated by two local school teaches. These three stations are the beginning of a community-operated environmental surveillance program that will ultimately involve the public in most surveillance operations around the Site. The program was designed to stimulate interest in Hanford environmental surveillance operations, and to help the public better understand surveillance results. The program has also been used to enhance educational opportunities at local schools

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ... Your Lung Operation Read Next Your Discharge and Recovery Back to Top Find A Surgeon Find A ...

Design of a high speed rotating mechanical shutter

International Nuclear Information System (INIS)

Stowers, I.F.; Merritt, B.T.; McFann, C.B.

1979-01-01

A high-speed rotating shutter was designed to operate in a 10 -6 Torr vacuum at the optical focus of a laser spatial filter. The shutter is basically a wheel, with a single 3 x 10-mm slot at the perimeter, which rotates with a peripheral speed of 1 km/s. The motor to drive the rotating wheel is magnetically suspended and synchronously wound. The wheel achieves a 4 μs opening time and a timing accuracy of better than 0.2 μs

[The occipital sinus: a radioanatomic study].

Science.gov (United States)

Gaumont-Darcissac, M; Viart, L; Foulon, P; Le Gars, D; Havet, E; Peltier, J

2015-03-01

The aim of this study was to assess the presence of an occipital sinus in both children and adults, and to detail its main associated anatomical characteristics. One hundred of patients' MRI (3D T1 EG) between 0 and 86 years old were studied, in sagittal and axial sections, with the software DxMM. Occipital sinus length, perimeter, and cerebellar falx length measurements were performed with the software's tools. Forty-three percent of patients had an occipital sinus (average perimeter was 3.02 mm, average length was 19.85 mm), and 23.26% of these patients had a cerebellar falx, 30.23% of these patients had one vein or more draining into the occipital sinus. Sixty-two percent of children had an occipital sinus (average perimeter was 2.87 mm, average length was 21.63 mm), and 29.03% of them had a cerebellar falx. Twenty-four percent of adults had an occipital sinus (average perimeter was 3.4mm, average length was 15.28 mm), and 8.33% of them had a cerebellar falx. This work highlights a link between the age and the occipital sinus existence. The perimeter of this sinus seems to be superior for adults, but its length seems to be superior for children. A cerebellar falx with the occipital sinus was found more frequently for children. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Winding mandrel design for the wide cable SSC dipole

International Nuclear Information System (INIS)

Morgan, G.H.; Greene, A.; Jochen, G.; Morgillo, A.

1990-01-01

The 50 mm coil i.d. SSC dipole magnets use wider cables to give a greater operational margin between quench field and operating field. The cable used for the inner coil has 30 strands of the same size (0.808 mm) instead of 23 and the outer has 36 strands of the same size (0.648 mm) instead of 30 and the cable widths are increased in proportion. Although the coil inner diameter has been increased from 40 mm, the coil ends are noticeably harder to wind. This report describes the computational and experimental effort to design winding mandrels or center posts for the constant-perimeter ends. 1 ref., 2 figs., 2 tabs

Collider baseline parameters: Milestone M1.5

CERN Document Server

Schulte, Daniel

2016-01-01

The deliverable D1.1 provided a preliminary specification of the layout and target operation parameters for the FCC-hh hadron collider concept. It serves as the basis for the studies in all work packages. Tis milestone summarises the outcome of the first studies of this design. The goal of the FCC hadron collider is to provide proton-proton collisions at a centre-of-mass energy of 100 TeV. The machine is compatible with ion beam operation. Assuming a nominal dipole field of 16 T, such a machine is based on a perimeter of 100 km. The machine is designed to accommodate two main proton experiments that are operated simultaneously. The machine delivers a peak luminosity of 5-30 x 1034 cm-2s-1. The layout allows for two additional special-purpose experiments.

Using cyber vulnerability testing techniques to expose undocumented security vulnerabilities in DCS and SCADA equipment

International Nuclear Information System (INIS)

Pollet, J.

2006-01-01

This session starts by providing an overview of typical DCS (Distributed Control Systems) and SCADA (Supervisory Control and Data Acquisition) architectures, and exposes cyber security vulnerabilities that vendors never admit, but are found through a comprehensive cyber testing process. A complete assessment process involves testing all of the layers and components of a SCADA or DCS environment, from the perimeter firewall all the way down to the end devices controlling the process, including what to look for when conducting a vulnerability assessment of real-time control systems. The following systems are discussed: 1. Perimeter (isolation from corporate IT or other non-critical networks) 2. Remote Access (third Party access into SCADA or DCS networks) 3. Network Architecture (switch, router, firewalls, access controls, network design) 4. Network Traffic Analysis (what is running on the network) 5. Host Operating Systems Hardening 6. Applications (how they communicate with other applications and end devices) 7. End Device Testing (PLCs, RTUs, DCS Controllers, Smart Transmitters) a. System Discovery b. Functional Discovery c. Attack Methodology i. DoS Tests (at what point does the device fail) ii. Malformed Packet Tests (packets that can cause equipment failure) iii. Session Hijacking (do anything that the operator can do) iv. Packet Injection (code and inject your own SCADA commands) v. Protocol Exploitation (Protocol Reverse Engineering / Fuzzing) This paper will provide information compiled from over five years of conducting cyber security testing on control systems hardware, software, and systems. (authors)

Using cyber vulnerability testing techniques to expose undocumented security vulnerabilities in DCS and SCADA equipment

Energy Technology Data Exchange (ETDEWEB)

Pollet, J. [PlantData Technologies, Inc., 1201 Louisiana Street, Houston, TX 77002 (United States)

2006-07-01

This session starts by providing an overview of typical DCS (Distributed Control Systems) and SCADA (Supervisory Control and Data Acquisition) architectures, and exposes cyber security vulnerabilities that vendors never admit, but are found through a comprehensive cyber testing process. A complete assessment process involves testing all of the layers and components of a SCADA or DCS environment, from the perimeter firewall all the way down to the end devices controlling the process, including what to look for when conducting a vulnerability assessment of real-time control systems. The following systems are discussed: 1. Perimeter (isolation from corporate IT or other non-critical networks) 2. Remote Access (third Party access into SCADA or DCS networks) 3. Network Architecture (switch, router, firewalls, access controls, network design) 4. Network Traffic Analysis (what is running on the network) 5. Host Operating Systems Hardening 6. Applications (how they communicate with other applications and end devices) 7. End Device Testing (PLCs, RTUs, DCS Controllers, Smart Transmitters) a. System Discovery b. Functional Discovery c. Attack Methodology i. DoS Tests (at what point does the device fail) ii. Malformed Packet Tests (packets that can cause equipment failure) iii. Session Hijacking (do anything that the operator can do) iv. Packet Injection (code and inject your own SCADA commands) v. Protocol Exploitation (Protocol Reverse Engineering / Fuzzing) This paper will provide information compiled from over five years of conducting cyber security testing on control systems hardware, software, and systems. (authors)

Conduct of operations: establishing operational focus and setting operational standards

International Nuclear Information System (INIS)

Lane, L.; McGuigan, K.

1998-01-01

Due to the nature of our business, we have often tended to focus on the technological aspects of the nuclear industry. The focus of this paper is directed towards the importance of addressing the people skills, attitudes, and 'culture' within, and surrounding, our facilities as key areas of improvement. Within Ontario Hydro Nuclear (OLIN) we have developed the terminology 'event free' operation and 'event free' culture. 'Event Free' recognizes errors as a part of human performance. 'Event Free' takes into account human weaknesses, and provides tools (such as standards) to manage, control, and mitigate errors. In essence, 'Event Free' encompasses two concepts: 1. Prevent errors from occurring; 2. If an error is made, catch it before it can affect safe operation of the facility, learn from the error, and ensure that it does not happen again. In addressing these business realities, Ontario Hydro has identified a number of key support mechanisms and corresponding performance standards that are essential for achieving operating excellence and an 'event free' business culture. This paper will discuss two operational aspects of an 'event free' culture, the first being a set of expectations to enhance the culture, and the second an example of cultural change: 1. Operating Standards - establishing clear expectations for human performance in operating staff; 2. Operational Focus - the understanding that, as a nuclear worker, you should consider every task, activity, in fact everything you do in this business, for the potential to affect safe and reliable operation of a nuclear facility. Note that although the term 'Operational' appears in the title, this concept applies to every individual in the nuclear business, from the cleaner, to the Board of Directors, to the external supplier. (author)

Comparison of gap frame designs and materials for precision cathode strip chambers

International Nuclear Information System (INIS)

Horvath, J.A.; Pratuch, S.M.; Belser, F.C.

1993-01-01

Precision cathode strip chamber perimeter designs that incorporate either continuous or discrete-post gap frames are analyzed. The effects of ten design and material combinations on gravity sag, mass, stress, and deflected shape are evaluated. Procedures are recommended for minimizing mass in the chamber perimeter region while retaining structural integrity and electrical design latitude

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Overview ACS-AEI Consortium Quarterly ACS Chapter News Cancer ... American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD After Your Operation ...

Computer-based image studies on tumor nests mathematical features of breast cancer and their clinical prognostic value.

Science.gov (United States)

Wang, Lin-Wei; Qu, Ai-Ping; Yuan, Jing-Ping; Chen, Chuang; Sun, Sheng-Rong; Hu, Ming-Bai; Liu, Juan; Li, Yan

2013-01-01

The expending and invasive features of tumor nests could reflect the malignant biological behaviors of breast invasive ductal carcinoma. Useful information on cancer invasiveness hidden within tumor nests could be extracted and analyzed by computer image processing and big data analysis. Tissue microarrays from invasive ductal carcinoma (n = 202) were first stained with cytokeratin by immunohistochemical method to clearly demarcate the tumor nests. Then an expert-aided computer analysis system was developed to study the mathematical and geometrical features of the tumor nests. Computer recognition system and imaging analysis software extracted tumor nests information, and mathematical features of tumor nests were calculated. The relationship between tumor nests mathematical parameters and patients' 5-year disease free survival was studied. There were 8 mathematical parameters extracted by expert-aided computer analysis system. Three mathematical parameters (number, circularity and total perimeter) with area under curve >0.5 and 4 mathematical parameters (average area, average perimeter, total area/total perimeter, average (area/perimeter)) with area under curve nests could be a useful parameter to predict the prognosis of early stage breast invasive ductal carcinoma.

Dual-shaped offset reflector antenna designs from solutions of the geometrical optics first-order partial differential equations

Science.gov (United States)

Galindo-Israel, V.; Imbriale, W.; Shogen, K.; Mittra, R.

1990-01-01

In obtaining solutions to the first-order nonlinear partial differential equations (PDEs) for synthesizing offset dual-shaped reflectors, it is found that previously observed computational problems can be avoided if the integration of the PDEs is started from an inner projected perimeter and integrated outward rather than starting from an outer projected perimeter and integrating inward. This procedure, however, introduces a new parameter, the main reflector inner perimeter radius p(o), when given a subreflector inner angle 0(o). Furthermore, a desired outer projected perimeter (e.g., a circle) is no longer guaranteed. Stability of the integration is maintained if some of the initial parameters are determined first from an approximate solution to the PDEs. A one-, two-, or three-parameter optimization algorithm can then be used to obtain a best set of parameters yielding a close fit to the desired projected outer rim. Good low cross-polarization mapping functions are also obtained. These methods are illustrated by synthesis of a high-gain offset-shaped Cassegrainian antenna and a low-noise offset-shaped Gregorian antenna.

Morphological characterization with image analysis of cocoa beverage powder agglomerated with steam

Directory of Open Access Journals (Sweden)

Fernanda Zaratini Vissotto

2014-12-01

Full Text Available In this study, the morphological characteristics of cocoa beverage powder granules under minimal, average, and maximal process conditions of a steam agglomerator were studied. a stereoscopic microscope coupled to a digital camera was used for the morphological analysis. The images were analyzed to obtain shape and size descriptors. aiming to evaluate the descriptors, 150 particles were analyzed. The results showed that there was no difference between the shape descriptors - compacity, circularity, roughness, and aspect ratio - in the operating conditions evaluated. It was observed that the cocoa beverage powder granules are elongated in shape. The size descriptors, area, perimeter, perimeter of convex bounding polygon, minimal and maximal Feret diameter, were different in the process conditions for the granules of size above 600 μm. as for the minimal process conditions, especially due to low solid feed rates, there is an increase in the size descriptor values. In addition, under the minimum process conditions, in which there is low solid feed rate (400g/min for a steam pressure of 1.0 bar, it was obtained a good granular condition with retention of 81.1% of granules on sieves with aperture size between 300 and 1190 μm.

Exact generating function for 2-convex polygons

International Nuclear Information System (INIS)

James, W R G; Jensen, I; Guttmann, A J

2008-01-01

Polygons are described as almost-convex if their perimeter differs from the perimeter of their minimum bounding rectangle by twice their 'concavity index', m. Such polygons are called m-convex polygons and are characterized by having up to m indentations in their perimeter. We first describe how we conjectured the (isotropic) generating function for the case m = 2 using a numerical procedure based on series expansions. We then proceed to prove this result for the more general case of the full anisotropic generating function, in which steps in the x and y directions are distinguished. In doing so, we develop tools that would allow for the case m > 2 to be studied

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Medical Student Core Curriculum ACS/ASE Medical Student Simulation-Based Surgical Skills Curriculum Cancer Education Cancer Education ... Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD After Your Operation ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... You Want to Be a Surgeon Resident Resources Teaching Resources Online Guide to Choosing a Surgical Residency ... After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after the operation ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Liability Surgeons as Advocates Surgeons and Bundled Payment Models Surgeons as Institutional Employees Our Changing Health Care ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Safety Resources About the Patient Education Program The Recovery Room Choosing Wisely Educational Programs Educational Programs Educational ... Lung Operation After Your Operation Your Discharge and Recovery Complete Video After Your Operation Guidance for after ...

Root-Crown Relations of Young Sugar Maple and Yellow Birch

Science.gov (United States)

Carl H. Tubbs

1977-01-01

Young forest-grown sugar maple and yellow birch (1 to 6 inches d.b.h.) crowns were mapped and roots excavated. Crown dimensions were compared. Sugar maple roots usually terminated within a few feet of the crown perimeter. Yellow birch roots frequently terminated well outside crown perimeters and roots of birch were more irregularly distributed than those of maple....

The BF formalism for QCD and quark confinement

International Nuclear Information System (INIS)

Fucito, F.; Zeni, M.

1997-01-01

Using the BF version of pure Yang-Mills, it is possible to find a covariant representation of the 't Hooft magnetic flux operator. In this framework, 't Hooft's pioneering work on confinement finds an explicit realization in the continuum. Employing the Abelian projection gauge we compute the expectation value of the magnetic variable and find the expected perimeter law. We also check the area law behavior for the Wilson loop average and compute the string tension which turns out to be of the right order of magnitude. (orig.)

Solving the Turbine Positioning Problem for Large Offshore Wind Farms by Simulated Annealing

DEFF Research Database (Denmark)

Rivas, Rajai Aghabi; Clausen, Jens; Hansen, Kurt Schaldemose

2009-01-01

search operations are performed recursively until the system converges. The effectiveness of the proposed algorithm is demonstrated on a suite of real life test cases, including Horns Rev offshore wind farm. The results are verified using a commercial wind resource software indicating that this method...... is negligible while, as the wind farm's size reduces, the differences start becoming significant. A sensitivity analysis is also performed showing that greater density of turbines in the perimeter of the optimized wind farm reduces the wake losses even if the wind climate changes....

Application for Permit to Operate a Class II Solid Waste Disposal Site at the Nevada Test Site - U10c Disposal Site

Energy Technology Data Exchange (ETDEWEB)

NSTec Environmental Programs

2010-03-31

The Nevada Test Site (NTS) is located approximately 105 km (65 mi) northwest of Las Vegas, Nevada. National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is the federal lands management authority for the NTS and National Security Technologies LLC (NSTec) is the Management and Operations contractor. Access on and off the NTS is tightly controlled, restricted, and guarded on a 24-hour basis. The NTS is posted with signs along its entire perimeter. NSTec is the operator of all solid waste disposal sites on the NTS. The site will be used for the disposal of refuse, rubbish, garbage, sewage sludge, pathological waste, Asbestos-Containing Material (ACM), industrial solid waste, hydrocarbon-burdened soil, hydrocarbon-burdened demolition and construction waste, and other inert waste (hereafter called permissible waste). Waste containing free liquids or regulated under Subtitle C of the Resource Conservation and Recovery Act (RCRA) will not be accepted for disposal at the site. Waste regulated under the Toxic Substance Control Act (TSCA), excluding Polychlorinated Biphenyl [PCB], Bulk Product Waste (see Section 6.2.5) and ACM (see Section 6.2.2.2) will not be accepted for disposal at the site. The disposal site will be used as the sole depository of permissible waste which is: (1) Generated by entities covered under the U.S. Environmental Protection Agency (EPA) Hazardous Waste Generator Identification Number for the NTS; (2) Generated at sites identified in the Federal Facilities Agreement and Consent Order (FFACO); (3) Sensitive records and media, including documents, vugraphs, computer disks, typewriter ribbons, magnetic tapes, etc., generated by NNSA/NSO or its contractors; (4) ACM generated by NNSA/NSO or its contractors according to Section 6.2.2.2, as necessary; (5) Hydrocarbon-burdened soil and solid waste from areas covered under the EPA Hazardous Waste Generator Identification Number for the NTS; (6) Other waste on a case-by-case concurrence by

Claims of operators, non-operators and third parties arising from oil and gas operations

International Nuclear Information System (INIS)

Block, R.W.; Semadeni, T.

1999-01-01

There has come a resurgence in the number of companies involved in the oil and gas industry seeking protection from their creditors because of the recent weakness in commodity prices. Because most operations in this industry are conducted jointly, a single insolvency can lead to a toppling of other participants in the joint venture and beyond. The problem is to minimize one's losses if other members of the joint venture become insolvent. An examination is included of some remedies which may be available to operators, non-operators and third parties when faced with an insolvent oil and gas participant. The remedies which may be available to the non-operator that is owed moneys by its operator are discussed. The remedies that the operator has against its non-operators, with an emphasis on the nature of the operator's lien and the right of set-off, are described. A brief review is included of some of the remedies that might be available to a third party as against the operators and non-operators. Some s uggestions are included for directors, bankers, third parties, non-operators and operators

Operator-assisted planning and execution of proximity operations subject to operational constraints

Science.gov (United States)

Grunwald, Arthur J.; Ellis, Stephen R.

1991-01-01

Future multi-vehicle operations will involve multiple scenarios that will require a planning tool for the rapid, interactive creation of fuel-efficient trajectories. The planning process must deal with higher-order, non-linear processes involving dynamics that are often counter-intuitive. The optimization of resulting trajectories can be difficult to envision. An interaction proximity operations planning system is being developed to provide the operator with easily interpreted visual feedback of trajectories and constraints. This system is hosted on an IRIS 4D graphics platform and utilizes the Clohessy-Wiltshire equations. An inverse dynamics algorithm is used to remove non-linearities while the trajectory maneuvers are decoupled and separated in a geometric spreadsheet. The operator has direct control of the position and time of trajectory waypoints to achieve the desired end conditions. Graphics provide the operator with visualization of satisfying operational constraints such as structural clearance, plume impingement, approach velocity limits, and arrival or departure corridors. Primer vector theory is combined with graphical presentation to improve operator understanding of suggested automated system solutions and to allow the operator to review, edit, or provide corrective action to the trajectory plan.

Applied Operations Research: Operator's Assistant

Science.gov (United States)

Cole, Stuart K.

2015-01-01

NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

Using fractional order method to generalize strengthening generating operator buffer operator and weakening buffer operator

OpenAIRE

Wu, L.; Liu, S.; Yang, Yingjie

2016-01-01

Traditional integer order buffer operator is extended to fractional order buffer operator, the corresponding relationship between the weakening buffer operator and the strengthening buffer operator is revealed. Fractional order buffer operator not only can generalize the weakening buffer operator and the strengthening buffer operator, but also realize tiny adjustment of buffer effect. The effectiveness of GM(1,1) with the fractional order buffer operator is validated by six cases.

Prevalence of operator fatigue in winter maintenance operations.

Science.gov (United States)

Camden, Matthew C; Medina-Flintsch, Alejandra; Hickman, Jeffrey S; Bryce, James; Flintsch, Gerardo; Hanowski, Richard J

2018-02-02

Similar to commercial motor vehicle drivers, winter maintenance operators are likely to be at an increased risk of becoming fatigued while driving due to long, inconsistent shifts, environmental stressors, and limited opportunities for sleep. Despite this risk, there is little research concerning the prevalence of winter maintenance operator fatigue during winter emergencies. The purpose of this research was to investigate the prevalence, sources, and countermeasures of fatigue in winter maintenance operations. Questionnaires from 1043 winter maintenance operators and 453 managers were received from 29 Clear Road member states. Results confirmed that fatigue was prevalent in winter maintenance operations. Over 70% of the operators and managers believed that fatigue has a moderate to significant impact on winter maintenance operations. Approximately 75% of winter maintenance operators reported to at least sometimes drive while fatigued, and 96% of managers believed their winter maintenance operators drove while fatigued at least some of the time. Furthermore, winter maintenance operators and managers identified fatigue countermeasures and sources of fatigue related to winter maintenance equipment. However, the countermeasures believed to be the most effective at reducing fatigue during winter emergencies (i.e., naps) were underutilized. For example, winter maintenance operators reported to never use naps to eliminate fatigue. These results indicated winter maintenance operations are impacted by operator fatigue. These results support the increased need for research and effective countermeasures targeting winter maintenance operator fatigue. Copyright © 2018 Elsevier Ltd. All rights reserved.

Heat transfer operators associated with quantum operations

International Nuclear Information System (INIS)

Aksak, C; Turgut, S

2011-01-01

Any quantum operation applied on a physical system is performed as a unitary transformation on a larger extended system. If the extension used is a heat bath in thermal equilibrium, the concomitant change in the state of the bath necessarily implies a heat exchange with it. The dependence of the average heat transferred to the bath on the initial state of the system can then be found from the expectation value of a Hermitian operator, which is named as the heat transfer operator (HTO). The purpose of this paper is to investigate the relation between the HTOs and the associated quantum operations. Since any given quantum operation on a system can be realized by different baths and unitaries, many different HTOs are possible for each quantum operation. On the other hand, there are also strong restrictions on the HTOs which arise from the unitarity of the transformations. The most important of these is the Landauer erasure principle. This paper is concerned with the question of finding a complete set of restrictions on the HTOs that are associated with a given quantum operation. An answer to this question has been found only for a subset of quantum operations. For erasure operations, these characterizations are equivalent to the generalized Landauer erasure principle. For the case of generic quantum operations, however, it appears that the HTOs obey further restrictions which cannot be obtained from the entropic restrictions of the generalized Landauer erasure principle.

Effectiveness of operation tools developed by KEKB operators

International Nuclear Information System (INIS)

Sugino, K.; Satoh, Y.; Kitabayashi, T.

2004-01-01

The main tasks of KEKB (High Energy Accelerator Research Organization B-physics) operators are beam tuning and injection, operation logging, monitoring of accelerator conditions and safety management. New beam tuning methods are frequently applied to KEKB in order to accomplish high luminosity. In such a situation, various operation tools have been developed by the operators to realize efficient operation. In this paper, we describe effectiveness of tools developed by the operators. (author)

Adaptations to the perimeter environmental radiation monitoring network at the ININ (conceptual design of case)

International Nuclear Information System (INIS)

Gonzalez P, M. A.

2016-01-01

At present, equipment for the detection of gamma radiation existing in the environment is being developed to protect the population in the Mexico country. The Instituto Nacional de Investigaciones Nucleares (ININ) implemented the gamma radiation monitoring probe (GRMP), which is an instrument used to measure the ionizing radiation in the environment and this in turn communicates with the National Network for Radiological Environmental Monitoring, which detects in real time the gamma radiation. The probes are located in strategic points in the different States of the Mexican Republic and due to their exposure to different types of climate, cause different damages to the case of the GRMP. Due to this situation is that this work is focused on performing different tests to maintain the case in order to validate the problems encountered and investigate new improvements for optimal operation. (Author)

Dynamic material accountancy in an integrated safeguards system

International Nuclear Information System (INIS)

Murrell, J.S.

1979-01-01

The nuclear material safeguards system at the Portsmouth Gaseous Diffusion Plant is currently being improved. A new material control system will provide computerized monitoring and accountability, and a new physical protection system will provide upgraded perimeter and portal entry monitoring. The control system incorporates remote computer terminals at all processing, transfer and storage areas throughout the plant. Terminal equipment is interfaced to a computer through teletype equipment. A typical terminal transaction would require verification that the particular activity (material movement or process operation) is authorized, identifying the container involved, weighing the container, and then verifying the enrichment with non-destructive assay instrumentation. The system, when fully operational, will provide near real-time accountability for each eight-hour work shift for all items in process. (author)

Dynamic material accountancy in an integrated safeguards system

International Nuclear Information System (INIS)

Murrell, J.S.

1978-01-01

The nuclear material safeguards system at the Portsmouth Gaseous Diffusion Plant is currently being improved. A new material control system will provide computerized monitoring and accountability, and a new physical protection system will provide upgraded perimeter and portal entry monitoring. The control system incorporates remote computer terminals at all processing, transfer, and storage areas throughout the plant. Terminal equipment is interfaced to a computer through teletype equipment. A typical terminal transaction would require verification that the particular activity (material movement or process operation) is authorized, identifying the container involved, weighing the container, and then verifying the enrichment with non-destructive assay instrumentation. The system, when fully operational, will provide near real-time accountability for each eight-hour work shift for all items in process

Review of operational aids for nuclear plant operators

International Nuclear Information System (INIS)

Kisner, R.A.

1983-01-01

Many approaches are being explored to improve the safety of nuclear plant operations. One approach is to supply high-quality, relevant information by means of computer-based diagnostic systems to assist plant operators in performing their operational and safety-related roles. The evaluation of operational aids to ensure safe plant operations is a necessary function of NRC. This work has two purposes: to collect limited data on a diversity of operational aids, and to provide a method for evaluating the safety implications of the functions of proposed operational aids. After a discussion of the method evaluation now under study, this paper outlines this data collection to date

Industrial safety and applied health physics. Annual report for 1980

International Nuclear Information System (INIS)

1981-11-01

Information is reported in sections entitled: radiation monitoring; Environmental Management Program; radiation and safety surveys; industrial safety and special projects; Office of Operational Safety; and training, lectures, publications, and professional activities. There were no external or internal exposures to personnel which exceeded the standards for radiation protection as defined in DOE Manual Chapter 0524. Only 35 employees received whole body dose equivalents of 10 mSv (1 rem) or greater. There were no releases of gaseous waste from the Laboratory which were of a level that required an incident report to DOE. There were no releases of liquid radioactive waste from the Laboratory which were of a level that required an incident report to DOE. The quantity of those radionuclides of primary concern in the Clinch River, based on the concentration measured at White Oak Dam and the dilution afforded by the Clinch River, averaged 0.16 percent of the concentration guide. The average background level at the Perimeter Air Monitoring (PAM) stations during 1980 was 9.0 μrad/h (0.090 μGy/h). Soil samples were collected at all perimeter and remote monitoring stations and analyzed for eleven radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 1.5 Bq/kg (0.04 pCi/g), and the uranium-235 content ranged from 0.7 Bq/kg (0.02 pCi/g) to 16 Bq/kg (0.43 pCi/g). Grass samples were collected at all perimeter and remote monitoring stations and analyzed for twelve radionuclides including plutonium and uranium. Plutonium-239 content ranged from 0.04 Bq/kg (0.001 pCi/g) to 0.07 Bq/kg (0.002 pCi/g), and the uranium-235 content ranged from 0.37 Bq/kg (0.01 pCi/g) to 12 Bq/kg

Nonlocal Operational Calculi for Dunkl Operators

Directory of Open Access Journals (Sweden)

Ivan H. Dimovski

2009-03-01

Full Text Available The one-dimensional Dunkl operator $D_k$ with a non-negative parameter $k$, is considered under an arbitrary nonlocal boundary value condition. The right inverse operator of $D_k$, satisfying this condition is studied. An operational calculus of Mikusinski type is developed. In the frames of this operational calculi an extension of the Heaviside algorithm for solution of nonlocal Cauchy boundary value problems for Dunkl functional-differential equations $P(D_ku = f$ with a given polynomial $P$ is proposed. The solution of these equations in mean-periodic functions reduces to such problems. Necessary and sufficient condition for existence of unique solution in mean-periodic functions is found.

Benchmarking Distance Control and Virtual Drilling for Lateral Skull Base Surgery.

Science.gov (United States)

Voormolen, Eduard H J; Diederen, Sander; van Stralen, Marijn; Woerdeman, Peter A; Noordmans, Herke Jan; Viergever, Max A; Regli, Luca; Robe, Pierre A; Berkelbach van der Sprenkel, Jan Willem

2018-01-01

Novel audiovisual feedback methods were developed to improve image guidance during skull base surgery by providing audiovisual warnings when the drill tip enters a protective perimeter set at a distance around anatomic structures ("distance control") and visualizing bone drilling ("virtual drilling"). To benchmark the drill damage risk reduction provided by distance control, to quantify the accuracy of virtual drilling, and to investigate whether the proposed feedback methods are clinically feasible. In a simulated surgical scenario using human cadavers, 12 unexperienced users (medical students) drilled 12 mastoidectomies. Users were divided into a control group using standard image guidance and 3 groups using distance control with protective perimeters of 1, 2, or 3 mm. Damage to critical structures (sigmoid sinus, semicircular canals, facial nerve) was assessed. Neurosurgeons performed another 6 mastoidectomy/trans-labyrinthine and retro-labyrinthine approaches. Virtual errors as compared with real postoperative drill cavities were calculated. In a clinical setting, 3 patients received lateral skull base surgery with the proposed feedback methods. Users drilling with distance control protective perimeters of 3 mm did not damage structures, whereas the groups using smaller protective perimeters and the control group injured structures. Virtual drilling maximum cavity underestimations and overestimations were 2.8 ± 0.1 and 3.3 ± 0.4 mm, respectively. Feedback methods functioned properly in the clinical setting. Distance control reduced the risks of drill damage proportional to the protective perimeter distance. Errors in virtual drilling reflect spatial errors of the image guidance system. These feedback methods are clinically feasible. Copyright © 2017 Elsevier Inc. All rights reserved.

Network perimeter security building defense in-depth

CERN Document Server

Riggs, Cliff

2003-01-01

PREFACEWho is this Book For?The Path to Network SecurityWho Should Read This Book?MANAGING NETWORK SECURITYThe Big Picture: Security Policies from A to ZAdministrative CountermeasuresPhysical CountermeasuresTechnological CountermeasuresCreating the Security Standards DocumentCreating the Configuration Guide DocumentPulling it All Together: Sample Security Policy CreationProteris Security Standards and ProceduresTHE NETWORK STACK AND SECURITYConnecting the NetworkProtocolsServers and HostsCRYPTOGRAPHY AND VPN TERMINOLOGYKeysCertificatesHashingDigital SignaturesCommon Encryption AlgorithmsSplit

24 CFR 3285.311 - Required perimeter supports.

Science.gov (United States)

2010-04-01

... HOUSING AND URBAN DEVELOPMENT MODEL MANUFACTURED HOME INSTALLATION STANDARDS Foundations § 3285.311... sides of side wall exterior doors (such as entry, patio, and sliding glass doors) and any other side wall openings of 48 inches or greater in width, and under load-bearing porch posts, factory installed...

Dilation volumes of sets of bounded perimeter

DEFF Research Database (Denmark)

Kiderlen, Markus; Rataj, Jan

, this derivative coincides up to sign with the directional derivative of the covariogram of A in direction u. By known results for the covariogram, this derivative can therefore be expressed by the cosine transform of the surface area measure of A. We extend this result to sets Q that are at most countable and use...... it to determine the derivative of the contact distribution function of a stationary random closed set at zero. A variant for uncountable Q is given, too. The proofs are based on approximation of the characteristic function of A by smooth functions of bounded variation and showing corresponding formulas for them....

cyclic π-perimeter hydrocarbon ruthenium complexes bearing ...

Indian Academy of Sciences (India)

on the basis of FT-IR and NMR spectroscopic data as well as by elemental analysis. Molecular structures of ... Experimental ... vent over dichloromethane solution of the cor- responding ... tion filtered to remove ammonium chloride and excess ammonium ...... UV-vis spectra of complexes were acquired in ace- tonitrile and ...

Learning Area and Perimeter with Virtual Manipulatives

Science.gov (United States)

Bouck, Emily; Flanagan, Sara; Bouck, Mary

2015-01-01

Manipulatives are considered a best practice for educating students with disabilities, but little research exists which examines virtual manipulatives as tool for supporting students in mathematics. This project investigated the use of a virtual manipulative through the National Library of Virtual Manipulatives--polynominoes (i.e., tiles)--as a…

Synergy, a co-operative innovation for joint operations

International Nuclear Information System (INIS)

Todd, C.; Feuchtwanger, T.; Moberg, R.; Lesser, L.

1993-01-01

Industry cooperation in the operation of the large Swan Hills oil field in western Alberta is described. Declining production and increasing costs required innovative approaches to field operation. Traditional operation involved one operator making the majority of decisions with funding controlled by numerous non-operating joint owners, and can suffer from interaction problems due to the inherenty competitive nature of the petroleum industry. The new mode of operation stresses trust, cooperation, teamwork, resource sharing, and continuous improvement. The synergy involves sharing best practices, information, knowledge and expertise, combining resources, and standardizing procedures and specifications. The new mode of operation has resulted in an improved performance of up to 15%. The cooperation lessons learnt at Swan Hills may have broad application across the petroleum industry. 6 refs., 6 figs

The use of computer blast simulations to improve blast quality

International Nuclear Information System (INIS)

Favreau, R.F.; Kuzzyk, G.W.; Babulic, P.J.; Morin, R.A.; Tienkamp, N.J.

1987-01-01

An underground research laboratory (URL) has been constructed as part of a comprehensive program to evaluate the concept of nuclear fuel waste disposal in deep crystalline rock formations. Careful blasting methods have been used to minimize damage to the excavation surfaces. This paper reviews the results of the program to develop controlled blasting for the full-face method, comparing the field observed results achieved with the simulated theoretical results. The simulated results indicate how the blasting may damage the excavation surface. Results suggest that the rock around the final wall is stressed more severely by the cushion holes than by the perimeter holes and that bootleg of the rock between the perimeter and cushion rows occurs when the burst-out velocity imparted to it by the explosive loads in the perimeter holes is inadequate

Does Operational Risk Disclosure Quality Increase Operating Cash Flows?

Directory of Open Access Journals (Sweden)

Haitham Nobanee

2017-12-01

Full Text Available This study aims to measure the degree of operational risk disclosure and examine its impact on operating cash flow of banks listed on the UAE Abu Dhabi Stock Exchange (ADX and Dubai Financial Market (DFM during the period 2003-2016. The authors conducted content analysis of the annual reports to measure the degree of operational risk disclosure. In addition, they used dynamic panel data regressions to analyze the impact of operational risk disclosure on the operating cash flow generated by the banks. The results show a low degree of operational risk disclosure for all UAE banks, both Islamic and conventional. In addition, the results show no association between the levels of disclosure of operational risk and cash flow for all banks, conventional and Islamic. Operational risk disclosure of Islamic banks has not been examined by any prior researchers. In addition, this paper examines the potential impact of operational risk disclosure on the operating cash flow generated by the banks.

Operator programs and operator processes

NARCIS (Netherlands)

Bergstra, J.A.; Walters, P.

2003-01-01

We define a notion of program which is not a computer program but an operator program: a detailed description of actions performed and decisions taken by a human operator (computer user) performing a task to achieve a goal in a simple setting consisting of that user, one or more computers and a

From EGEE Operations Portal towards EGI Operations Portal

Science.gov (United States)

Cordier, Hélène; L'Orphelin, Cyril; Reynaud, Sylvain; Lequeux, Olivier; Loikkanen, Sinikka; Veyre, Pierre

Grid operators in EGEE have been using a dedicated dashboard as their central operational tool, stable and scalable for the last 5 years despite continuous upgrade from specifications by users, monitoring tools or data providers. In EGEE-III, recent regionalisation of operations led the Operations Portal developers to conceive a standalone instance of this tool. We will see how the dashboard reorganization paved the way for the re-engineering of the portal itself. The outcome is an easily deployable package customized with relevant information sources and specific decentralized operational requirements. This package is composed of a generic and scalable data access mechanism, Lavoisier; a renowned php framework for configuration flexibility, Symfony and a MySQL database. VO life cycle and operational information, EGEE broadcast and Downtime notifications are next for the major reorganization until all other key features of the Operations Portal are migrated to the framework. Features specifications will be sketched at the same time to adapt to EGI requirements and to upgrade. Future work on feature regionalisation, on new advanced features or strategy planning will be tracked in EGI- Inspire through the Operations Tools Advisory Group, OTAG, where all users, customers and third parties of the Operations Portal are represented from January 2010.

POST-CLOSURE INSPECTION AND MONITORING REPORT FOR CORRECTIVE ACTION UNIT 91: AREA 3 U3 fi INJECTION WELL, NEVADA TEST SITE, NEVADA FOR THE PERIOD NOVEMBER 2003 - OCTOBER 2004

International Nuclear Information System (INIS)

2005-01-01

This Post-Closure Inspection and Monitoring report provides an analysis and summary of inspections, meteorological information, and neutron soil moisture monitoring for Corrective Action Unit (CAU) 91: Area 3 U-3fi Injection Well, Nevada Test Site (NTS), Nevada. This report covers the annual period November 2003 through October 2004. Site inspections of CAU 91 are performed every six months to identify any significant changes that could impact the proper operation of the waste disposal unit. Inspection results for the current period indicate that the overall condition of the concrete pad, perimeter fence, and warning signs is good

Preliminary dismantling for the decommissioning of nuclear licensed facilities at the CEA Centre in Fontenay aux Roses

International Nuclear Information System (INIS)

Estivie, D.; Bohar, M.P.; Jeanjacques, M.; Binet, C.

2008-01-01

Under the perimeter modification programme for the Nuclear Licensed Facilities (NLFs) of the French Atomic Energy Commission centre at Fontenay aux Roses (CEN-FAR), preliminary dismantling work proved necessary to decommission the buildings outside the nuclear perimeter and create interim storage areas for waste packages. This summary describes the dismantling of Buildings 07, 53 and 91/54, which are the most representative of the preliminary dismantling work. (author)

Forest cover of Champaign County, Illinois in 1993

Science.gov (United States)

Jesus Danilo Chinea; Louis R. Iverson

1997-01-01

The forest cover of Champaign County, in east-central Illinois, was mapped from 1993 aerial photography and entered in a geographical information system database. One hundred and six forest patches cover 3,380 ha. These patches have a mean area of 32 ha, a mean perimeter of 4,851 m, a mean perimeter to area ratio of 237, a fractal dimension of 1.59, and a mean nearest...

Mapping surficial geology and assessment of permafrost conditions under the Iqaluit airport, Nunavut, Canada

Science.gov (United States)

Mathon-Dufour, V.; Allard, M.; Leblanc, A.; L'Hérault, E.; Oldenborger, G. A.; Sladen, W. E.

2012-12-01

Formerly, characterization of permafrost conditions was minimal before the construction of infrastructures. It was assumed that the permafrost would forever remain a solid substrate. Before global warming, transportation infrastructures were not designed, especially in terms of materials and dimensions, to withstand without damage an increased input of heat in the soil. Iqaluit airport, the hub of the eastern Canadian Arctic, is currently affected by thawing permafrost. In fact, the runway, taxiways and apron are affected by differential settlements resulting from the presence of localized ice-rich soils. This study uses a GIS approach that makes up for the absence of appropriate characterization before the construction of the airport during WWII and in the 1950s. Mapping of surficial geology, hydrography and landforms indicative of the presence of ground ice (e.g. tundra polygons) was produced by interpreting aerial photographs dating back from the initial phases of construction (1948) and photographs taken at intervals since then, to the most recent high-resolution satellite images. Subsequent map analysis shows that the original terrain conditions prevailing before the construction of the airport have a significant impact on the current stability of the infrastructure. Data integration allowed us to summarize the main problems affecting the Iqaluit airport which are: 1) Differential settlements associated with pre-construction drainage network 2) Cracking due to thermal contraction, 3) Linear depressions associated with ice wedge degradation and 4) Sink holes. Most of the sectors affected by differential settlements and instabilities are perfectly coincident with the original streams and lakes network that has been filled to increase the size of the runway, taxiways and the apron. In addition, the runway is affected by intense frost cracking. Similarities with nearby natural terrain suggest that the network pattern of the cracks follows pre-existing ice wedges

Spatiotemporal monitoring of soil salinization in irrigated Tadla Plain (Morocco) using satellite spectral indices

Science.gov (United States)

El Harti, Abderrazak; Lhissou, Rachid; Chokmani, Karem; Ouzemou, Jamal-eddine; Hassouna, Mohamed; Bachaoui, El Mostafa; El Ghmari, Abderrahmene

2016-08-01

Soil salinization is major environmental issue in irrigated agricultural production. Conventional methods for salinization monitoring are time and money consuming and limited by the high spatiotemporal variability of this phenomenon. This work aims to propose a spatiotemporal monitoring method of soil salinization in the Tadla plain in central Morocco using spectral indices derived from Thematic Mapper (TM) and Operational Land Imager (OLI) data. Six Landsat TM/OLI satellite images acquired during 13 years period (2000-2013) coupled with in-situ electrical conductivity (EC) measurements were used to develop the proposed method. After radiometric and atmospheric correction of TM/OLI images, a new soil salinity index (OLI-SI) is proposed for soil EC estimation. Validation shows that this index allowed a satisfactory EC estimation in the Tadla irrigated perimeter with coefficient of determination R2 varying from 0.55 to 0.77 and a Root Mean Square Error (RMSE) ranging between 1.02 dS/m and 2.35 dS/m. The times-series of salinity maps produced over the Tadla plain using the proposed method show that salinity is decreasing in intensity and progressively increasing in spatial extent, over the 2000-2013 period. This trend resulted in a decrease in agricultural activities in the southwestern part of the perimeter, located in the hydraulic downstream.

An assessment of composite repair system in offshore platform for corroded circumferential welds in super duplex steel pipe

Directory of Open Access Journals (Sweden)

Silvio de Barros

2018-04-01

Full Text Available The main aim of this study is to assess the effectiveness of a composite repair system in severely corroded circumferential welds in super duplex stainless steel pipes as a preventive measure against the premature corrosion damage at the welds. Artificial defects were fabricated on the super duplex steel tube in order to reproduce the localized corrosion damage defects found in real welded joints. Three kinds of through thickness defects were considered: 25%, 50% and 96% of the perimeter of the pipe. The performance of the repaired pipe was assessed by hydrostatic tests as per ISO 24817 standard. The results showed that the composite repair system can sustain the designed failure pressure even for the pipe damaged with through-wall defect up to 96% of the perimeter of the pipe. Hence, the composite repair system can be used as a preliminary tool to protect the unexpected or premature failure at the welds and maintain an adequate level of mechanical strength for a given operating pressure. This composite repair system can assure that the pipe will not leak until a planned maintenance of the line. Nevertheless, further work is still desirable to improve the confidence in the long-term performance of bonded composite

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Careers at ACS Careers at ACS About ACS Career Types Working at ACS ... ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... to Participate Resources Webinars for Young Surgeons YFA E-News YFA Advocacy Essay Contest Resident and Associate ... ACS Leader International Exchange Scholar Program Resources RAS E-News Medical Students Operation Giving Back Operation Giving ...

Elementary operators on self-adjoint operators

Science.gov (United States)

Molnar, Lajos; Semrl, Peter

2007-03-01

Let H be a Hilbert space and let and be standard *-operator algebras on H. Denote by and the set of all self-adjoint operators in and , respectively. Assume that and are surjective maps such that M(AM*(B)A)=M(A)BM(A) and M*(BM(A)B)=M*(B)AM*(B) for every pair , . Then there exist an invertible bounded linear or conjugate-linear operator and a constant c[set membership, variant]{-1,1} such that M(A)=cTAT*, , and M*(B)=cT*BT, .

Toward a New Trilateral Strategic Security Relationship: United States, Canada, and Mexico

Directory of Open Access Journals (Sweden)

Richard J. Kilroy, Jr.

2010-01-01

Full Text Available The term "perimeter defense" has come back into vogue recently, with regard to security strategies for North America. The United States' concern primarily with the terrorist threat to its homeland subsequent to September 11, 2001 (9/11 is generating this discussion with its immediate neighbors of Mexico and Canada (and to some extent some Caribbean nations—the "third border". The concept is simply that by pushing defenses out to the "perimeter" nations, then security will be enhanced, since the United States visions itself as more vulnerable to international terrorism than its neighbors. However, Canada and Mexico have not been very happy about the perimeter defined by Washington since 9/11. These nations have sought to define the trilateral relationship beyond just discussions of terrorism to include natural disasters and international organized crime as a component of a broader trilateral agenda. Eight years later these three nations continue to look for some convergence of security interests, although there remains a degree of tension and hesitancy towards achieving a "common security agenda" in the Western Hemisphere.This article examines the concept of "perimeter defense" within the context of the new security challenges that the United States, Mexico, and Canada face today. Questions to be addressed in the article include: Do all these nations share the same "threat" perception? Where exactly is the "perimeter?" What security arrangements have been tried in the past? What are the prospects for the future for increased security cooperation? The main focus of this article is at the sub-regional level in North America and whether a new "trilateral" strategic security relationship between the United States, Canada, and Mexico can emerge in North America.

Vision-based algorithms for high-accuracy measurements in an industrial bakery

Science.gov (United States)

Heleno, Paulo; Davies, Roger; Correia, Bento A. B.; Dinis, Joao

2002-02-01

This paper describes the machine vision algorithms developed for VIP3D, a measuring system used in an industrial bakery to monitor the dimensions and weight of loaves of bread (baguettes). The length and perimeter of more than 70 different varieties of baguette are measured with 1-mm accuracy, quickly, reliably and automatically. VIP3D uses a laser triangulation technique to measure the perimeter. The shape of the loaves is approximately cylindrical and the perimeter is defined as the convex hull of a cross-section perpendicular to the baguette axis at mid-length. A camera, mounted obliquely to the measuring plane, captures an image of a laser line projected onto the upper surface of the baguette. Three cameras are used to measure the baguette length, a solution adopted in order to minimize perspective-induced measurement errors. The paper describes in detail the machine vision algorithms developed to perform segmentation of the laser line and subsequent calculation of the perimeter of the baguette. The algorithms used to segment and measure the position of the ends of the baguette, to sub-pixel accuracy, are also described, as are the algorithms used to calibrate the measuring system and compensate for camera-induced image distortion.

Lead Thickness Measurements

International Nuclear Information System (INIS)

Rucinski, R.

1998-01-01

The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in 3 , an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

Operator bosonization on Riemann surfaces: new vertex operators

International Nuclear Information System (INIS)

Semikhatov, A.M.

1989-01-01

A new formalism is proposed for the construction of an operator theory of generalized ghost systems (bc theories of spin J) on Riemann surfaces (loop diagrams of the theory of closed strings). The operators of the bc system are expressed in terms of operators of the bosonic conformal theory on a Riemann surface. In contrast to the standard bosonization formulas, which have meaning only locally, operator Baker-Akhiezer functions, which are well defined globally on a Riemann surface of arbitrary genus, are introduced. The operator algebra of the Baker-Akhiezer functions generates explicitly the algebraic-geometric τ function and correlation functions of bc systems on Riemann surfaces

A report on digital image processing and analysis

International Nuclear Information System (INIS)

Singh, B.; Alex, J.; Haridasan, G.

1989-01-01

This report presents developments in software, connected with digital image processing and analysis in the Centre. In image processing, one resorts to either alteration of grey level values so as to enhance features in the image or resorts to transform domain operations for restoration or filtering. Typical transform domain operations like Karhunen-Loeve transforms are statistical in nature and are used for a good registration of images or template - matching. Image analysis procedures segment grey level images into images contained within selectable windows, for the purpose of estimating geometrical features in the image, like area, perimeter, projections etc. In short, in image processing both the input and output are images, whereas in image analyses, the input is an image whereas the output is a set of numbers and graphs. (author). 19 refs

Annual environmental monitoring report of the Lawrence Berkeley Laboratory

International Nuclear Information System (INIS)

Schleimer, G.E.

1983-04-01

In order to establish whether LBL research activities produces any impact on the population surrounding the Laboratory, a program of environmental air and water sampling and continuous radiation monitoring was carried on throughout the year. For 1982, as in the previous several years, doses attributable to LBL radiological operations were a small fraction of the relevant radiation protection guidelines (RPG). The maximum perimeter dose equivalent was less than or equal to 24.0 mrem (the 1982 dose equivalent measured at the Building 88 monitoring station B-13A, about 5% of the RPG). The total population dose equivalent attributable to LBL operations during 1982 was less than or equal to 16 man-rem, about 0.002% of the RPG of 170 mrem/person to a suitable sample of the population

A Comparative Classification of Wheat Grains for Artificial Neural Network and Extreme Learning Machine

OpenAIRE

ASLAN, Muhammet Fatih; SABANCI, Kadir; YİĞİT, Enes; KAYABAŞI, Ahmet; TOKTAŞ, Abdurrahim; DUYSAK, Hüseyin

2018-01-01

In this study, classification of two types of wheat grainsinto bread and durum was carried out. The species of wheat grains in thisdataset are bread and durum and these species have equal samples in the datasetas 100 instances. Seven features, including width, height, area, perimeter,roundness, width and perimeter/area were extracted from each wheat grains. Classificationwas separately conducted by Artificial Neural Network (ANN) and Extreme Learning Machine (ELM)artificial intelligence techn...

Operating systems

CERN Document Server

Tsichritzis, Dionysios C; Rheinboldt, Werner

1974-01-01

Operating Systems deals with the fundamental concepts and principles that govern the behavior of operating systems. Many issues regarding the structure of operating systems, including the problems of managing processes, processors, and memory, are examined. Various aspects of operating systems are also discussed, from input-output and files to security, protection, reliability, design methods, performance evaluation, and implementation methods.Comprised of 10 chapters, this volume begins with an overview of what constitutes an operating system, followed by a discussion on the definition and pr

Operational calculus

CERN Document Server

Boehme, Thomas K

1987-01-01

Operational Calculus, Volume II is a methodical presentation of operational calculus. An outline of the general theory of linear differential equations with constant coefficients is presented. Integral operational calculus and advanced topics in operational calculus, including locally integrable functions and convergence in the space of operators, are also discussed. Formulas and tables are included.Comprised of four sections, this volume begins with a discussion on the general theory of linear differential equations with constant coefficients, focusing on such topics as homogeneous and non-ho

Spatial Operations

Directory of Open Access Journals (Sweden)

Anda VELICANU

2010-09-01

Full Text Available This paper contains a brief description of the most important operations that can be performed on spatial data such as spatial queries, create, update, insert, delete operations, conversions, operations on the map or analysis on grid cells. Each operation has a graphical example and some of them have code examples in Oracle and PostgreSQL.

Operation planning device

International Nuclear Information System (INIS)

Watanabe, Takashi; Odakawa, Naoto; Erikuchi, Makoto; Okada, Masayuki; Koizumi, Atsuhiko.

1996-01-01

The device of the present invention provides a device suitable for monitoring a reactor core state and operation replanning in terms of reactor operation. Namely, (1) an operation result difference judging means judges that replanning is necessary when the operation results deviates from the operation planning, (2) an operation replanning rule data base storing means stores a deviation key which shows various kinds of states where the results deviate from the planning and a rule for replanning for returning to the operation planning on every deviating key, (3) an operation replanning means forms a new operation planning in accordance with the rule which is retrieved based on the deviation key, (4) an operation planning optimizing rule data base storing means evaluates the reformed planning and stores it on every evaluation item, (5) an operation planning optimization means correct the operation planning data so as to be optimized when the evaluation of the means (4) is less than a reference value, and (6) an operation planning display means edits adaptable operation planning data and the result of the evaluation and displays them. (I.S.)

Operational amplifiers

CERN Document Server

Dostal, Jiri

1993-01-01

This book provides the reader with the practical knowledge necessary to select and use operational amplifier devices. It presents an extensive treatment of applications and a practically oriented, unified theory of operational circuits.Provides the reader with practical knowledge necessary to select and use operational amplifier devices. Presents an extensive treatment of applications and a practically oriented, unified theory of operational circuits

Environmental Assessment for a Taxiway M Bypass Road at Travis Air Force Base, California

Science.gov (United States)

2011-10-01

is land that has a combination of physical and chemical characteristics that make it good for food, feed, forage, fiber , and oilseed crops. Farmland...swales, or basalt flow depression pools in unplowed grasslands. The fairy shrimp has been collected from early December to early May. It can mature...types where the species has been found include Northern Hardpan, Northern Claypan, Northern Volcanic Mud Flow, and Northern Basalt Flow vernal pools

Operational circular No. 1 (Rev. 1) – Operational circulars

CERN Multimedia

HR Department

2011-01-01

Operational Circular No. 1 (Rev. 1) is applicable to members of the personnel and other persons concerned. Operational Circular No. 1 (Rev. 1) entitled "Operational circulars", approved following discussion at the Standing Concertation Committee meeting on 4 May 2011, is available on the intranet site of the Human Resources Department: https://hr-docs.web.cern.ch/hr-docs/opcirc/opcirc.asp It cancels and replaces Operational Circular No. 1 entitled "Operational Circulars” of December 1996. This new version clarifies, in particular, that operational circulars do not necessarily arise from the Staff Rules and Regulations, and the functional titles have been updated to bring them into line with the current CERN organigram. Department Head Office  

Systemic Operational Design: Enhancing the Joint Operation Planning Process

National Research Council Canada - National Science Library

Delacruz, Victor J

2007-01-01

Operational level commanders and their staffs require relevant and current joint doctrine that articulates the critical function of operational design and its role in the Joint Operation Planning Process (JOPP...

3D GIS spatial operation based on extended Euler operators

Science.gov (United States)

Xu, Hongbo; Lu, Guonian; Sheng, Yehua; Zhou, Liangchen; Guo, Fei; Shang, Zuoyan; Wang, Jing

2008-10-01

The implementation of 3 dimensions spatial operations, based on certain data structure, has a lack of universality and is not able to treat with non-manifold cases, at present. ISO/DIS 19107 standard just presents the definition of Boolean operators and set operators for topological relationship query, and OGC GeoXACML gives formal definitions for several set functions without implementation detail. Aiming at these problems, based mathematical foundation on cell complex theory, supported by non-manifold data structure and using relevant research in the field of non-manifold geometry modeling for reference, firstly, this paper according to non-manifold Euler-Poincaré formula constructs 6 extended Euler operators and inverse operators to carry out creating, updating and deleting 3D spatial elements, as well as several pairs of supplementary Euler operators to convenient for implementing advanced functions. Secondly, we change topological element operation sequence of Boolean operation and set operation as well as set functions defined in GeoXACML into combination of extended Euler operators, which separates the upper functions and lower data structure. Lastly, we develop underground 3D GIS prototype system, in which practicability and credibility of extended Euler operators faced to 3D GIS presented by this paper are validated.

Guardians of the Threshold. The Minor Friars as guarantors of social perimeter (13th century Guardiani della soglia. I Frati Minori come garanti del perimetro sociale (XIII secolo

Directory of Open Access Journals (Sweden)

Giacomo Todeschini

2007-12-01

Full Text Available The contribution analyses Minor Friars’ role in pacifying the civitas. Minor Friars’ charisma appeared as an antidote to scandalum and a preliminary to the readmission of the townspeople inside the circuit of the fides. This particular disposition, which was used by Franciscan texts since the beginning to substantiate the fratres’ sanctity, is connected to their capacity to offer themselves as successful civic mediators, even though they were a religious group, then an Order, whose distinguishing feature consisted in their ecclesiological and social inferiority (minoritas. The reasons for such an attitude can be traced back to Minor Friars’ political ability to try out their closeness to the ecclesial and urban power connecting it to the experimentation of the perimeter of the civitas, which was patent even from the location of the first settlements: from the social viewpoint, this experimentation expressed itself in contact with the pauperes, the marginal and the wicked. Thus, Minor Friars became an element of composition of different social poles managing to mediate the relation between fama and infamia, between potentes and pauperes.

Il contributo indaga il ruolo dei Minori nella pacificazione della civitas. Il carisma dei frati minori si presentava come antidoto allo scandalum e premessa alla riammissione della cittadinanza all’interno del circuito della fides. Tale speciale attitudine, che sin dalle origini fu utilizzata dai testi francescani per comprovare la santità dei fratres, viene ricondotta alla loro capacità di proporsi come efficaci mediatori civici pur costituendo un gruppo religioso, poi un Ordine, il cui tratto di identificazione era dato dall’inferiorità ecclesiologica e sociale (minoritas. Le ragioni di un simile atteggiamento vengono

Examination of Operation Quality for High-frequent Railway Operation

DEFF Research Database (Denmark)

Landex, Alex; Kaas, Anders H.

2009-01-01

take the first train in their direction. The article examines four different approaches to examine operation quality for high-frequent operation that are based on the experiences of the passengers. These approaches are the service frequency of the operation, travel time extension, a combination......The examination of operation quality for high-frequent operation requires other approaches than the typical evaluation of punctuality (trains on time) and reliability (operated trains). This is because passengers in high-frequent railway systems do not necessarily notice train delays as they just...... of the service frequency and travel time approaches, and passenger delays. The service frequency and travel time approaches are simple measurements with low complexity and complement each other. Therefore, the article recommends combining the service frequency and travel time approaches to get a more accurate...

Burnout Conditions for Flow of Boiling Water in Vertical Rod Clusters

Energy Technology Data Exchange (ETDEWEB)

Becker, Kurt M

1962-05-15

This paper deals with a new concept for predicting burnout conditions for forced convection of boiling water in fuel elements of nuclear boiling reactors. The concept states the importance of considering the ratio of heated channel perimeter to total channel perimeter. The perimeter ratio concept was arrived at from an experimental study of burnout conditions in rod clusters consisting of three rods of 13 mm outside diameter and 970 mm heated length. Data were obtained for pressures between{sub 2}. 5 and 10 kg/cm, surface heat fluxes between 50 and 120 W/cm, mass flow rates between 0.03 and 0.33 kg/sec and steam qualities between 0.01 and 0.52. The rod distances for the experiment were 2 mm and 6 mm. The diameter of the channel was 41.3 mm. Additional runs were also performed after introducing unheated displacement rods in the channel. The rod distance in this case was 6 mm. In the ranges investigated the measured burnout steam qualities at the outlet of the channel decreases with increasing heat flux and decreasing pressure. Furthermore it has been found that the influence of rod distance is, in the range investigated, of small significance for engineering purposes. It has also been observed that the present burnout steam quality data for the rod clusters are much lower than those earlier obtained for round ducts. This may be explained physically by means of the perimeter ratio concept. It has also been found that the surface shear-stress distribution around the channel perimeter and especially the position of maximum shear-stress is of great importance for predicting burnout conditions for flow in channels. Finally the new method has helped us to understand and interpret experimental results which earlier may have seemed inconsistent.

Burnout Conditions for Flow of Boiling Water in Vertical Rod Clusters

International Nuclear Information System (INIS)

Becker, Kurt M.

1962-05-01

This paper deals with a new concept for predicting burnout conditions for forced convection of boiling water in fuel elements of nuclear boiling reactors. The concept states the importance of considering the ratio of heated channel perimeter to total channel perimeter. The perimeter ratio concept was arrived at from an experimental study of burnout conditions in rod clusters consisting of three rods of 13 mm outside diameter and 970 mm heated length. Data were obtained for pressures between 2 . 5 and 10 kg/cm, surface heat fluxes between 50 and 120 W/cm, mass flow rates between 0.03 and 0.33 kg/sec and steam qualities between 0.01 and 0.52. The rod distances for the experiment were 2 mm and 6 mm. The diameter of the channel was 41.3 mm. Additional runs were also performed after introducing unheated displacement rods in the channel. The rod distance in this case was 6 mm. In the ranges investigated the measured burnout steam qualities at the outlet of the channel decreases with increasing heat flux and decreasing pressure. Furthermore it has been found that the influence of rod distance is, in the range investigated, of small significance for engineering purposes. It has also been observed that the present burnout steam quality data for the rod clusters are much lower than those earlier obtained for round ducts. This may be explained physically by means of the perimeter ratio concept. It has also been found that the surface shear-stress distribution around the channel perimeter and especially the position of maximum shear-stress is of great importance for predicting burnout conditions for flow in channels. Finally the new method has helped us to understand and interpret experimental results which earlier may have seemed inconsistent

Study of the dam site shape effect on the behaviour of the perimeter joint of arockfill dam having a reinforced concrete face Исследование влияния формы створа на работу периметрального шва каменной плотины с железобетонным экраном

Directory of Open Access Journals (Sweden)

Sainov Mikhail Petrovich

2013-09-01

Full Text Available The article deals with the dam site shape effect produced on values of displacements in the perimeter joint of the 100 m high rockfill dam having a reinforced concrete face. Six alternative options of the dam site were considered: 3 sites having trapezoidal shape and 3 sites having triangular shape. The options also differ in slopes of rock sides (1:2, 1:5, 1:1. Displacements in a perimeter joint were identified based on the analyses of stress-strain states of rockfill dams, completed using the method of contact finite element to model the behaviour of joints. According to the author’s findings, displacements in the perimeter joint occur in three directions: the opening, the outline deflection of the face and the longitudinal displacement of the face. In the course of the modeling process, the perimeter joint opened in all six options, because horizontal displacements of the face (in the direction along the river channel turned to be approximately equal to its settlement. In case of narrow (triangular sites, the maximal opening of the joint occurs on the rock sides. In case of wide sites, opening at low levels increases to a considerable extent; large openings are observed not only on dam sides, but in the river channel, as well. An opening of the perimeter joint means reduction of values of tensile forces on the face. If the perimeter joint opens, the face is free to move in other directions. Deflections may reach large values, especially if the dam site is wide and has steep rock sides. Deflections reach maximum values in the points, where the reinforced concrete face demonstrates its maximum deflection. The studies prove that the width of the dam part in the river channel has the major effect on values of displacements in the perimeter joint.Приведен анализ влияния формы створа на величины перемещений в периметральном шве каменной плотины с �

[Pre-operation evaluation and intra-operation management of cochlear implantation].

Science.gov (United States)

Zhang, Dao-xing; Hu, Bao-hua; Xiao, Yu-li; Shi, Bo-ning

2004-10-01

To summarize pre-operation evaluation experiences in cochlear implantation. Performing auditory evaluation and image analysis seriously in 158 severe hearing loss or total deaf cases before cochlear implantation, comparing their performance with the findings during and post operation. Among the total 158 cases, 116 cases with normal structure, 42 cases with the abnormal findings of the inner or middle ear. Stapedial gusher happened in 6 cases, 1 case was not predicted before operation. Except 1 case with serious malformation, the findings of other 157 cases in operation were consistent with the pre-operation evaluation. We helped all patients reconstruct auditory conduction with cochlear implantation, and the average hearing level up to 37.6 dB SPL. Performing image analysis seriously before operation and planning for operation according to HRCT can do great help to cochlear implantation. The operation under the HRCT instruction has less complications.

Operating experience feedback report - Solenoid-operated valve problems

International Nuclear Information System (INIS)

Ornstein, H.L.

1991-02-01

This report highlights significant operating events involving observed or potential common-mode failures of solenoid-operated valves (SOVs) in US plants. These events resulted in degradation or malfunction of multiple trains of safety systems as well as of multiple safety systems. On the basis of the evaluation of these events, the Office for Analysis and Evaluation of Operational Data (AEOD) of the US Nuclear Regulatory Commission (NRC) concludes that the problems with solenoid-operated valves are an important issue that needs additional NRC and industry attention. This report also provides AEOD's recommendations for actions to reduce the occurrence of SOV common-mode failures. 115 refs., 7 figs., 2 tabs

Experimental Study of 3D Movement in Cushioning of Hydraulic Cylinder

Directory of Open Access Journals (Sweden)

Antonio Algar

2017-05-01

Full Text Available A double acting cylinder operation has been fully monitored in its key functional parameters, focused on characterization of end-of-stroke cushioning and starting phases. Being the cylinder performance reliant in the piston constructive geometry, the number and location of piston circumferential grooves is a significant parameter affecting the internal cushioning system performance. An eddy current displacement sensor assembled in the piston allows assessment of piston radial displacement inside the cylinder tube, which is directly related with the studied operating phases. Due to such 3D displacements, the piston becomes as an active and self-adjusting element along the functional cycle of the cylinder. Mechanical joints orientation and operating pressure are also relevant parameters affecting piston radial displacement and, thus, the cushioning and starting performance. Computational Fluid Dynamics (CFD results confirm the observed functional role of the perimeter grooves; the flow and pressure distributions, where develops a significant radial force, are also in accordance with the registered radial displacement.

Designing Security-Hardened Microkernels For Field Devices

Science.gov (United States)

Hieb, Jeffrey; Graham, James

Distributed control systems (DCSs) play an essential role in the operation of critical infrastructures. Perimeter field devices are important DCS components that measure physical process parameters and perform control actions. Modern field devices are vulnerable to cyber attacks due to their increased adoption of commodity technologies and that fact that control networks are no longer isolated. This paper describes an approach for creating security-hardened field devices using operating system microkernels that isolate vital field device operations from untrusted network-accessible applications. The approach, which is influenced by the MILS and Nizza architectures, is implemented in a prototype field device. Whereas, previous microkernel-based implementations have been plagued by poor inter-process communication (IPC) performance, the prototype exhibits an average IPC overhead for protected device calls of 64.59 μs. The overall performance of field devices is influenced by several factors; nevertheless, the observed IPC overhead is low enough to encourage the continued development of the prototype.

Hanaro operation

International Nuclear Information System (INIS)

Lee, Ji Bok; Jeon, Byung Jin; Kwack, Byung Ho

1997-01-01

HANARO was configurated its first operating core in 1995. Long term operation test was conducted up to 3-1 cycle during 1996, in order to investigate the reactor characteristics due to fuel depletion and additional fuel loading. Now HANARO has accumulated 168.4 days of total operation time and 2,687.5 MWD of total thermal output. Reactor analysis, producing operation datum and its validation with test, periodic inspection and maintenance of the facility are continuously conducted for safe operation of the HANARO. Conducted the verification tests for installed utilization facilities, and successfully performed the radiation emergency drill. The shutdown report of TRIGA Mark II and III was submitted to MOST, and decommissioning will be started from 1997. (author). 70 tabs., 50 figs., 27 refs

Survey of Operators Knowledge of Operation and Maintenance of ...

African Journals Online (AJOL)

Result showed that the machine failures encountered during operations were as a result of poor management, inadequate maintenance practices, and lack of spare parts, obsoleteness, overloading, careless operations and poor storage of machine after use. Recommendations were therefore given to improve the operation ...

HFETR operation management

International Nuclear Information System (INIS)

Liu Rong; Yang Shuchun; Peng Jun; Zhou Shoukang

2003-01-01

Experiences and work methods with High Flux Engineering Test Reactor (HFETR) operation are introduced, which have been accumulated in a long period of operation, in the aspects as reactor operation, test, maintenance, operator training and incident management. It's clear that the safety operation of HFETR has been ensured, and the methods are valid. (authors)

Spacecraft operations

CERN Document Server

Sellmaier, Florian; Schmidhuber, Michael

2015-01-01

The book describes the basic concepts of spaceflight operations, for both, human and unmanned missions. The basic subsystems of a space vehicle are explained in dedicated chapters, the relationship of spacecraft design and the very unique space environment are laid out. Flight dynamics are taught as well as ground segment requirements. Mission operations are divided into preparation including management aspects, execution and planning. Deep space missions and space robotic operations are included as special cases. The book is based on a course held at the German Space Operation Center (GSOC).

Designing a fractal antenna of 2400 MHz

International Nuclear Information System (INIS)

Miranda Hamburger, Fabio

2012-01-01

The design of a fractal antenna with 2400 MHz of frequency has been studied. The fractal used is described by Waclaw Spierpi.ski. The initial figure, also known as seed, is divided using equilateral triangles with the aim of obtaining a perimeter similar to a meaningful portion of wave length. The use of λ to establish an ideal perimeter has reduced the radiation resistance. The adequate number of iterations needed to design the antenna is calculated based on λ. (author) [es

Advanced operation strategy for feed-and-bleed operation in an OPR1000

International Nuclear Information System (INIS)

Kim, Bo Gyung; Yoon, Ho Joon; Kim, Jaewhan; Kang, Hyun Gook

2016-01-01

Highlights: • Advanced operating strategy covers all necessary conditions for F&B operation. • Advanced operating strategy identifies the urgency of F&B operation. • An advanced operating strategy for F&B operation is developed using a decision tree. • Human error probability is re-estimated based on a thermohydraulic analysis and K-HRA method. • An advanced operation strategy provides indications under various plant situations. - Abstract: When the secondary side is unavailable in a pressurized water reactor (PWR), heat from the core will accumulate in the primary side causing core damage. In this situation a heat removal mechanism called feed-and-bleed operation (F&B operation) must be used, which is a process of directly cooling the primary reactor cooling system (RCS). However, conventional operation strategy in emergency operating procedures (EOPs) does not cover all possible conditions to initiate F&B operation. If the EOP informs on the urgency of F&B operation, operators will be able to more clearly make decisions regarding F&B operation initiation. In order to cover all possible scenarios for F&B operation and systematically inform its urgency, an advanced operating strategy using a decision tree is developed in this study. The plant condition can be classified according to failure of secondary side, RCS pressure condition, injectable inventory to RCS, and remaining core inventory. RCS pressure, core level, and RCS temperature are representative indicators which provide information regarding the initiation of F&B operation. Indicators can be selected based on their detectability and quantification, and a decision tree is developed according to combinations of indicators. To estimate the effects of the advanced operation strategy, human error probability (HEP) of F&B operation is re-estimated based on a thermohydraulic analysis. The available time for operators to initiate F&B operation is also re-estimated to obtain more realistic data. This

Operator-based metric for nuclear operations automation assessment

Energy Technology Data Exchange (ETDEWEB)

Zacharias, G.L.; Miao, A.X.; Kalkan, A. [Charles River Analytics Inc., Cambridge, MA (United States)] [and others

1995-04-01

Continuing advances in real-time computational capabilities will support enhanced levels of smart automation and AI-based decision-aiding systems in the nuclear power plant (NPP) control room of the future. To support development of these aids, we describe in this paper a research tool, and more specifically, a quantitative metric, to assess the impact of proposed automation/aiding concepts in a manner that can account for a number of interlinked factors in the control room environment. In particular, we describe a cognitive operator/plant model that serves as a framework for integrating the operator`s information-processing capabilities with his procedural knowledge, to provide insight as to how situations are assessed by the operator, decisions made, procedures executed, and communications conducted. Our focus is on the situation assessment (SA) behavior of the operator, the development of a quantitative metric reflecting overall operator awareness, and the use of this metric in evaluating automation/aiding options. We describe the results of a model-based simulation of a selected emergency scenario, and metric-based evaluation of a range of contemplated NPP control room automation/aiding options. The results demonstrate the feasibility of model-based analysis of contemplated control room enhancements, and highlight the need for empirical validation.

Operative Start Time Does Not Affect Post-Operative Infection Risk.

Science.gov (United States)

Guidry, Christopher A; Davies, Stephen W; Willis, Rhett N; Dietch, Zachary C; Shah, Puja M; Sawyer, Robert G

2016-10-01

Surgical care is delivered 24 h a day at most institutions. Alarmingly, some authors have found that certain operative start times are associated with greater morbidity and mortality rates. This effect has been noted in both the public and private sector. Although some of these differences may be related to process, they may also be caused by the human circadian rhythm and corresponding changes in host defenses. We hypothesized that the time of day of an operation would impact the frequency of certain post-operative outcomes significantly. Cases at a single tertiary-care center reported to the American College of Surgeons National Surgical Quality Improvement Program over a 10-year period were identified. Operative start times were divided into six-hour blocks, with 6 am to noon serving as the reference. Standard univariable techniques were applied. Multivariable logistic regression with mixed effects modeling then was used to determine the relation between operative start times and infectious outcomes, controlling for surgeon clustering. Statistical significance was set at p operative infectious complication. Seventy percent of these infections (n = 1,506) were surgical site infections. On univariable analysis considering all cases, nighttime and evening operations had higher rates of post-operative infections than those in performed during the day (9.1% from 6 am to noon; 9.7% from noon to 6 pm; 14.8% from 6 pm to midnight; and 14.4% from midnight to 6 am; p operative start time was not associated with the risk of post-operative infection, even when emergency cases were considered independently. Our data suggest that operative start times have no correlation with post-operative infectious complications. Further work is required to identify the source of the time-dependent outcome variability observed in previous studies.

Feynman's Operational Calculi: Spectral Theory for Noncommuting Self-adjoint Operators

International Nuclear Information System (INIS)

Jefferies, Brian; Johnson, Gerald W.; Nielsen, Lance

2007-01-01

The spectral theorem for commuting self-adjoint operators along with the associated functional (or operational) calculus is among the most useful and beautiful results of analysis. It is well known that forming a functional calculus for noncommuting self-adjoint operators is far more problematic. The central result of this paper establishes a rich functional calculus for any finite number of noncommuting (i.e. not necessarily commuting) bounded, self-adjoint operators A 1 ,..., A n and associated continuous Borel probability measures μ 1 , ?, μ n on [0,1]. Fix A 1 ,..., A n . Then each choice of an n-tuple (μ 1 ,...,μ n ) of measures determines one of Feynman's operational calculi acting on a certain Banach algebra of analytic functions even when A 1 , ..., A n are just bounded linear operators on a Banach space. The Hilbert space setting along with self-adjointness allows us to extend the operational calculi well beyond the analytic functions. Using results and ideas drawn largely from the proof of our main theorem, we also establish a family of Trotter product type formulas suitable for Feynman's operational calculi

Co-Operative Advances in Behavioral Health and Performance Research and Operations

Science.gov (United States)

VanderArk, Stephen T.; Leveton, Lauren B.

2011-01-01

In organizations that engage in both operations and applied research, with operational needs guiding research questions and research informing improved operations, the ideal goal is a synergy of ideas and information. In reality, this ideal synergy is often lacking. Real-time operational needs driving day-to-day decisions, lack of communication, lag time in getting research advances plugged into operations can cause both areas to suffer from this gap between operations and research. At Johnson Space Center, the Behavior Health and Performance group (BHP) strives to bridge this gap by following a Human Research Program framework: Expectations of future operational needs identify the knowledge gaps; the gaps in turn guide research leading to a product that is transitioned into operations. Thus, the direction those of us in research take is in direct response to current and future needs of operations. Likewise, those of us in operations actively seek knowledge that is supported by evidence-based research. We make an ongoing effort to communicate across the research and operations gap by working closely with each other and making a conscious effort to keep each other informed. The objective of the proposed panel discussion is to demonstrate through the following presentations the results of a successful collaboration between research and operations and to provide ASMA members with more practical knowledge and strategies for building these bridges to serve our field of practice well. The panel will consist of six presenters from BHP operations, internal BHP research, and external research instigated by BHP who together represent the entire BHP Research Transition to Operations Framework

Nuclear units operating improvement by using operating experience

International Nuclear Information System (INIS)

Rotaru, I.; Bilegan, I.C.

1997-01-01

The paper presents how the information experience can be used to improve the operation of nuclear units. This areas include the following items: conservative decision making; supervisory oversight; teamwork; control room distraction; communications; expectations and standards; operator training and fundamental knowledge, procedure quality and adherence; plant status awareness. For each of these topics, the information illustrate which are the principles, the lessons learned from operating experience and the most appropriate exemplifying documents. (authors)

Operating System Security

CERN Document Server

Jaeger, Trent

2008-01-01

Operating systems provide the fundamental mechanisms for securing computer processing. Since the 1960s, operating systems designers have explored how to build "secure" operating systems - operating systems whose mechanisms protect the system against a motivated adversary. Recently, the importance of ensuring such security has become a mainstream issue for all operating systems. In this book, we examine past research that outlines the requirements for a secure operating system and research that implements example systems that aim for such requirements. For system designs that aimed to

Operator entanglement of two-qubit joint unitary operations revisited: Schmidt number approach

Energy Technology Data Exchange (ETDEWEB)

Xia, Hui-Zhi; Li, Chao; Yang, Qing; Yang, Ming, E-mail: mingyang@ahu.edu.cn [Key Laboratory of Opto-electronic Information Acquisition and Manipulation, Ministry of Education, School of Physics and Material Science, Anhui University Hefei (China); Cao, Zhuo-Liang [School of Electronic Information Engineering, Hefei Normal University (China)

2012-08-15

The operator entanglement of two-qubit joint unitary operations is revisited. The Schmidt number, an important attribute of a two-qubit unitary operation, may have connection with the entanglement measure of the unitary operator. We find that the entanglement measure of a two-qubit unitary operators is classified by the Schmidt number of the unitary operators. We also discuss the exact relation between the operator entanglement and the parameters of the unitary operator. (author)

Environmental surveillance program of the Lawrence Berkeley Laboratory

International Nuclear Information System (INIS)

Thomas, R.H.

1976-04-01

The major radiological environmental impact of the Lawrence Berkeley Laboratory is due to the operation of four particle accelerators. Potential sources of population exposure at the Laboratory are discussed. The major source of population exposure due to accelerator operation arises from the prompt radiation field which consists principally of neutrons and photons. Release of small quantities of radionuclides is also a potential source of population exposure but is usually an order of magnitude less significant. Accelerator produced radiation levels at the Laboratory boundary are comparable with the magnitudes of the fluctuations found in the natural background radiation. Environmental monitoring of accelerator-produced radiation and of radionuclides is carried on throughout the Laboratory, at the Laboratory perimeter, and in the regions surrounding the Laboratory. The techniques used are described. The models used to calculate population exposure are described and discussed

[Post-surgical Achilles tendon and correlation with functional outcome: a review of 40 cases].

Science.gov (United States)

Wagnon, R; Akayi, M

2005-12-01

To assess the value of MRI in the post operative evaluation of Achilles tendon rupture. 40 patients treated for acute Achilles tendon rupture at the Pasteur Hospital of Cherbourg between 1994 and 2002 underwent postoperative MRI. The objective was to look for correlations between functional outcome and reproducible measurements from imaging data previously described in the literature. We obtained only two positive correlations among all the combinations of comparisons: the first one between the perimeter of the calf and the surface area of the posterior muscle compartment, the second between the surface area of the operated tendon and its elongation estimated by the recalculated ratio of ankle dorsiflexion amplitude. MRI plays no role in the routine follow-up of post-surgical Achilles tendons. It should consequently only be used as a specific tool in problem cases, such as evaluation of possible re-tear.

Preliminary Image Map of the 2007 Witch Fire Perimeter, Santa Ysabel Quadrangle, San Diego County, California

Science.gov (United States)

Clark, Perry S.; Scratch, Wendy S.; Bias, Gaylord W.; Stander, Gregory B.; Sexton, Jenne L.; Krawczak, Bridgette J.

2008-01-01

In the fall of 2007, wildfires burned out of control in southern California. The extent of these fires encompassed large geographic areas that included a variety of landscapes from urban to wilderness. The U.S. Geological Survey National Geospatial Technical Operations Center (NGTOC) is currently (2008) developing a quadrangle-based 1:24,000-scale image map product. One of the concepts behind the image map product is to provide an updated map in electronic format to assist with emergency response. This image map is one of 55 preliminary image map quadrangles covering the areas burned by the southern California wildfires. Each map is a layered, geo-registered Portable Document Format (.pdf) file. For more information about the layered geo-registered .pdf, see the readme file (http://pubs.usgs.gov/of/2008/1029/downloads/CA_Agua_Dulce_of2008-1029_README.txt). To view the areas affected and the quadrangles mapped in this preliminary project, see the map index (http://pubs.usgs.gov/of/2008/1029/downloads/CA_of2008_1029-1083_index.pdf) provided with this report.

Preliminary Image Map of the 2007 Buckweed Fire Perimeter, Agua Dulce Quadrangle, Los Angeles County, California

Science.gov (United States)

Clark, Perry S.; Scratch, Wendy S.; Bias, Gaylord W.; Stander, Gregory B.; Sexton, Jenne L.; Krawczak, Bridgette J.

2008-01-01

In the fall of 2007, wildfires burned out of control in southern California. The extent of these fires encompassed large geographic areas that included a variety of landscapes from urban to wilderness. The U.S. Geological Survey National Geospatial Technical Operations Center (NGTOC) is currently (2008) developing a quadrangle-based 1:24,000-scale image map product. One of the concepts behind the image map product is to provide an updated map in electronic format to assist with emergency response. This image map is one of 55 preliminary image map quadrangles covering the areas burned by the southern California wildfires. Each map is a layered, geo-registered Portable Document Format (.pdf) file. For more information about the layered geo-registered .pdf, see the readme file (http://pubs.usgs.gov/of/2008/1029/downloads/CA_Agua_Dulce_of2008-1029_README.txt). To view the areas affected and the quadrangles mapped in this preliminary project, see the map index (http://pubs.usgs.gov/of/2008/1029/downloads/CA_of2008_1029-1083_index.pdf) provided with this report.

Wettability measurements of irregular shapes with Wilhelmy plate method

Science.gov (United States)

Park, Jaehyung; Pasaogullari, Ugur; Bonville, Leonard

2018-01-01

One of the most accurate methods for measuring the dynamic contact angle of liquids on solid surfaces is the Wilhelmy plate method. This method generally requires the use of rectangular samples having a constant perimeter in the liquid during advancing and receding cycles. A new formulation based on the Wilhelmy force balance equation to determine the contact angle for plate samples with irregular shapes has been developed. This method employs a profile plot obtained from an optical image to determine the perimeter (i.e. wetted length) of the sample as a function of the immersion depth. The raw force data measured by the force tensiometer is manipulated using the profile plot and the Wilhelmy equation to determine the wetting force and consequently advancing and the receding contact angle. This method is verified with both triangular and irregular PTFE samples in water, and measured contact angles are in good agreement with results from conventional regular shaped samples with a constant perimeter.

Metric inequalities for polygons

Directory of Open Access Journals (Sweden)

Adrian Dumitrescu

2013-07-01

Full Text Available Let A1,A2,…,An be the vertices of a polygon with unit perimeter, that is Σi |Ai Ai+1|=1. We derive various tight estimates on the minimum and maximum values of the sum of pairwise distances, and respectively sum of pairwise squared distances among its vertices. In most cases such estimates on these sums in the literature were known only for convex polygons.In the second part, we turn to a problem of Braß  regarding the maximum perimeter of a simplen-gon (n odd contained in a disk of unit radius. The problem was recently solved by Audet et al. 2009, who gave an exact formula. Here we present an alternative simpler proof of this formula. We then examine what happens if the simplicity condition is dropped, and obtain an exact formula for the maximum perimeter in this case as well.

To What Extent Should Public Corporations Be Consolidated? Considering the Effects on Public Deficit and Debt in Spanish Municipalities

Directory of Open Access Journals (Sweden)

Marta de VICENTE LAMA

2018-02-01

Full Text Available The consolidation perimeter of the public sector is the most important line between the micro and macro systems of government accounting. This paper focuses on the public sector boundary and assesses the potential impact on key reported figures – such as the ‘Maastricht’ deficit and debt ratios – that would result from moving public corporations inside the perimeter of the consolidated general government sector, public corporations that currently lie outside the general government sector. After examining 90 Spanish local governments with populations of over 50,000 during the 2010-2012 period, our results show that including public corporations within the general government sector perimeter leads to substantial differences in deficit and debt ratios, and that these differences significantly increase the number of municipalities in violation of fiscal limits imposed by the government. We also find that municipalities’ pre- and post-consolidation debt ratios are significantly different depending on the ruling party’s political ideology.   

Intrusion recognition for optic fiber vibration sensor based on the selective attention mechanism

Science.gov (United States)

Xu, Haiyan; Xie, Yingjuan; Li, Min; Zhang, Zhuo; Zhang, Xuewu

2017-11-01

Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. A fiber optic perimeter detection system based on all-fiber interferometric sensor is proposed, through the back-end analysis, processing and intelligent identification, which can distinguish effects of different intrusion activities. In this paper, an intrusion recognition based on the auditory selective attention mechanism is proposed. Firstly, considering the time-frequency of vibration, the spectrogram is calculated. Secondly, imitating the selective attention mechanism, the color, direction and brightness map of the spectrogram is computed. Based on these maps, the feature matrix is formed after normalization. The system could recognize the intrusion activities occurred along the perimeter sensors. Experiment results show that the proposed method for the perimeter is able to differentiate intrusion signals from ambient noises. What's more, the recognition rate of the system is improved while deduced the false alarm rate, the approach is proved by large practical experiment and project.

Construction of vertex operators using operator formalism techniques

International Nuclear Information System (INIS)

Gato, B.; Massachusetts Inst. of Tech., Cambridge

1989-01-01

We derive vertex operators in oscillator form as an application of the conserved charges method developed by Vafa for the operator formalism in higher genus Riemann surfaces. This construction proves to be clear, direct and valid for the bosonic and fermionic strings as wells as for twisted strings on orbifolds. We discuss the method and construct vertex operators for the bosonic string moving on Z N orbifolds and for the fermionic string in the NSR formulation. (orig.)

Elk and Deer Study, Material Disposal Area G, Technical Area 54: Source document

International Nuclear Information System (INIS)

Ferenbaugh, J.K.; Fresquez, P.R.; Ebinger, M.H.; Gonzales, G.J.; Jordan, P.A.

1999-01-01

As nuclear research has become more prevalent, environmental contamination from the disposal of radioactive waste has become a prominent issue. At Los Alamos National Laboratory (LANL) in northern New Mexico, radioactive contamination from disposal operations has raised some very specific concerns. Material Disposal Area G (Area G) is the primary low-level radioactive waste disposal site at LANL and occupies an area adjacent to land belonging to the Native American community of the Pueblo of San Ildefonso. Analyses of soil and vegetation collected from the perimeter of Area G have shown concentrations of radionuclides greater than background concentrations established for northern New Mexico. As a result, Pueblo residents had become concerned that contaminants from Area G could enter tribal lands through various ecological pathways. The residents specifically questioned the safety of consuming meat from elk and deer that forage near Area G and then migrate onto tribal lands. Consequently, this study addresses the uptake of 3 H, 90 Sr, tot U, 238 Pu, 239 Pu, 241 Am, and 137 Cs by elk (Cervus elaphus) and deer (Odocoileus hemionus) that forage around the perimeter of Area G and the associated doses to the animals and to humans who consume these animals. Radionuclide uptake by and internal dose to animals was estimated using equations modified from National Council on Radiological Protection Report 76. The Residual Radiation computer code was used to estimate the external dose to animals and the dose to humans consuming meat. Soil and water concentrations from the perimeter of Area G and from background regions in northern New Mexico were averaged over 4 years (1993--1996) and used as input data for the models. Concentration estimates generated by the model correspond to the concentration range measured in actual tissue samples from elk and deer collected at LANL. The highest dose estimates for both animals (0.028 mrad/d) and humans (0.072 mrem/y) were well below

METHODS OF ASSESSING THE DEGREE OF DESTRUCTION OF RUBBER PRODUCTS USING COMPUTER VISION ALGORITHMS

Directory of Open Access Journals (Sweden)

A. A. Khvostov

2015-01-01

Full Text Available For technical inspection of rubber products are essential methods of improving video scopes analyzing the degree of destruction and aging of rubber in an aggressive environment. The main factor determining the degree of destruction of the rubber product, the degree of coverage is cracked, which can be described as the amount of the total area, perimeter cracks, geometric shapes and other parameters. In the process of creating a methodology for assessing the degree of destruction of rubber products arises the problem of the development of machine vision algorithm for estimating the degree of coverage of the sample fractures and fracture characterization. For the development of image processing algorithm performed experimental studies on the artificial aging of several samples of products that are made from different rubbers. In the course of the experiments it was obtained several samples of shots vulcanizates in real time. To achieve the goals initially made light stabilization of array images using Gaussian filter. Thereafter, for each image binarization operation is applied. To highlight the contours of the surface damage of the sample is used Canny algorithm. The detected contours are converted into an array of pixels. However, a crack may be allocated to several contours. Therefore, an algorithm was developed by combining contours criterion of minimum distance between them. At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the Minkowski dimension. Show schedule obtained by the method parameters destruction of samples of rubber products. The developed method allows you to automate assessment of the degree of aging of rubber products in telemetry systems, to study the dynamics of the aging process of polymers to

Seminar 1. Joint Military Operations. Application of the Operational Reserve

National Research Council Canada - National Science Library

Copp, A

1997-01-01

.... As a means of achieving decisive effect at the operational level of war, the operational reserve should be considered an operational function and should be addressed as both a planning element...

Modelling Oil-Spill Detection with Swarm Drones

Directory of Open Access Journals (Sweden)

F. Aznar

2014-01-01

Full Text Available Nowadays, swarm robotics research is having a great increase due to the benefits derived from its use, such as robustness, parallelism, and flexibility. Unlike distributed robotic systems, swarm robotics emphasizes a large number of robots, and promotes scalability. Among the multiple applications of such systems we could find are exploring unstructured environments, resource monitoring, or distributed sensing. Two of these applications, monitoring, and perimeter/area detection of a given resource, have several ecological uses. One of them is the detection and monitoring of pollutants to delimit their perimeter and area accurately. Maritime activity has been increasing gradually in recent years. Many ships carry products such as oil that can adversely affect the environment. Such products can produce high levels of pollution in case of being spilled into sea. In this paper we will present a distributed system which monitors, covers, and surrounds a resource by using a swarm of homogeneous low cost drones. These drones only use their local sensory information and do not require any direct communication between them. Taking into account the properties of this kind of oil spills we will present a microscopic model for a swarm of drones, capable of monitoring these spills properly. Furthermore, we will analyse the proper macroscopic operation of the swarm. The analytical and experimental results presented here show the proper evolution of our system.

Repels

International Nuclear Information System (INIS)

Maki, M.; Clarke, D.; McKeen, W.

1991-01-01

This paper reports on repels (Rapidly Extendible Perimeter Line Sensor) which is a recent development in transportable security technology. Repels utilizes a new coupled wave device technology (CWD) to provide the detection advantages of radio-frequency leaky cable guided radar for portable sensors. These advantages include an invisible, terrain-following detection zone, and an optimal detection characteristic for human-size targets. Repels adds the dimension of portability and set-up of an adjustable zone up to 100 m by a single person, typically within 20 minutes. Internal replaceable D-cell flashlight batteries provide power for weeks of operation. First introduced as a prototype for test and evaluation in 1988, Repels was launched as a Senstar NDI product in 1990. This paper outlines the technical principles of the Repels sensor, recent improvements from the original prototype results of early field test experience on production models, and applications. Recent advances driven by initial field tests include, for example, the use of inductively-coupled transmitter and receiver couplers, so that no radio frequency field connections are required, and simple conductors can be employed. Test and application experience in several countries has expanded from parked aircraft perimeters, military encampments, forward area surveillance, and waterside security, to dignitary protection and failed sensor stand-in. Such sensors may be used to protect facilities dealing with nuclear materials

Development of odorous gas model using municipal solid waste emission

International Nuclear Information System (INIS)

Mohd Nahar bin Othman; Muhd Noor Muhd Yunus; Ku Halim Ku Hamid

2010-01-01

The impact of ambient odour in the vicinity of the Semenyih MSW processing plant, commonly known as RDF plant, can be very negative to the nearby population, causing public restlessness and consequently affecting the business operation and sustainability of the plant. The precise source of the odour, types, emission level and the meteorological conditions are needed to predict and established the ambient odour level at the perimeter fence of the plant and address it with respect to the ambient standards. To develop the odour gas model for the purpose of treatment is very compulsory because in MSW odour it contain many component of chemical that contribute the smell. Upon modelling using an established package as well as site measurements, the odour level at the perimeter fence of the plant was deduced and found to be marginally high, above the normal ambient level. Based on this issue, a study was made to model odour using Ausplume Model. This paper will address and discuss the measurement of ambient gas odour, the dispersion modelling to establish the critical ambient emission level, as well as experimental validation using a simulated odour. The focus will be made on exploring the use of Ausplume modelling to develop the pattern of odour concentrations for various condition and times, as well as adapting the model for MSW odour controls. (author)

Large vehicle portal monitor for perimeter safeguards applications

International Nuclear Information System (INIS)

Caldwell, J.T.; Atwater, H.F.; Bernard, W.; Bieri, J.M.; Shunk, E.R.

1979-01-01

We have developed a class of vehicle portal monitors based on shielded 4π geometry neutron counting. we have derived and experimentally verified an analytical expression relating the detection sensitivity of the neutron tunnel vehicle portal monitor to four design parameters of the system. For a given number of neutron detectors, this design achieves one or more orders of magnitude improvement in nuclear materials detection sensitivity over previous vehicle portal monitors

A Study on the Operator Decision Support for Feed-and-Bleed Operation

International Nuclear Information System (INIS)

Kim, Bo Gyung; Kim, Sang Ho; Kang, Hyun Gook; Yoon, Ho Joon

2014-01-01

In the case of a combined accident that includes a failure of the secondary cooling system, it is difficult for operators to recognize the necessity of an feed and bleed (F and B) operation because a lot of parameters and alarms should be checked before a decision, and operators may spend a considerable amount of time arriving at the entry for a proper emergency operating procedure that contains the procedure for an F and B operation. Therefore, a clear identification of the success boundary of an F and B operation would help operators in their decision-making when a combined accident that includes a secondary cooling system failure occurs. This study will provide a useful guideline for the initiation of an F and B operation for operators. Cooling the RCS after a scram is one of the most important safety functions for preventing core damage. To support the operator in decision making whether to initiate the F and B operation, plant conditions requiring the initiation of an F and B operation were identified. Plant conditions are affected by the steam generator inventory, RCS inventory, core inventory, and safety injection availability. The combination of accident types, component availabilities, and the initiation time of an F and B operation affect the success of the F and B operation. Operators need clear information about the RCS condition when the steam generators, the RCS's main residual heat removal mechanism, become unavailable. When this happens, the initiation of an F and B operation becomes necessary. As the number of the state increases, the necessity of an F and B operation increases. Especially, the operator should initiate an F and B operation when the RCS condition enters State 3 for Type 1 incidents or State 3-2 for Type 2 incidents. The results of this study may be useful in providing information regarding the necessity and effects of an F and B operation in a quantitative manner. In particular, in the case of a combined accident including a

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

Directory of Open Access Journals (Sweden)

Ivor M D′Souza

2015-01-01

Full Text Available Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females were selected who had been treated by rapid maxillary expansion (RME using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA. Pretreatment (T1, postexpansion (T2, and posttreatment (T3 dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1-T2, T2-T3 and T1-T3 were determined for each patient. The mean difference between T1-T2, T2-T3 and T1-T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar

Tables of Products of Tensor Operators and Stevens Operators

DEFF Research Database (Denmark)

Lindgård, Per-Anker

1975-01-01

Numerical tables of products of tensor (Racah) operators, Rl,m(J), and Stevens operators Olm(J), working within a J-multiplet are given as a function of X=J(J+1). Examples of the use of the tables, such as the calculation of commutation relations and thermal averages are given.......Numerical tables of products of tensor (Racah) operators, Rl,m(J), and Stevens operators Olm(J), working within a J-multiplet are given as a function of X=J(J+1). Examples of the use of the tables, such as the calculation of commutation relations and thermal averages are given....

Operational Design for Peace Enforcement: Lessons for the Operational Staff

National Research Council Canada - National Science Library

Neumann, Michael

2004-01-01

U.S. involvement in Somalia serves as a useful case study of the unique challenges an operational staff may face when applying operational design to the planning and execution of a peace enforcement operation. U.S...

Operational symmetries basic operations in physics

CERN Document Server

Saller, Heinrich

2017-01-01

This book describes the endeavour to relate the particle spectrum with representations of operational electroweak spacetime, in analogy to the atomic spectrum as characterizing representations of hyperbolic space. The spectrum of hyperbolic position space explains the properties of the nonrelativistic atoms; the spectrum of electroweak spacetime is hoped to explain those of the basic interactions and elementary particles. In this book, the theory of operational symmetries is developed from the numbers, from Plato’s and Kepler’s symmetries over the simple Lie groups to their applications in nonrelativistic, special relativistic and general relativistic quantum theories with the atomic spectrum for hyperbolic position and, in first attempts, the particle spectrum for electroweak spacetime. The standard model of elementary particles and interactions is characterized by a symmetry group. In general, as initiated by Weyl and stressed by Heisenberg, quantum theory can be built as a theory of operation groups an...

Modeling operators' emergency response time for chemical processing operations.

Science.gov (United States)

Murray, Susan L; Harputlu, Emrah; Mentzer, Ray A; Mannan, M Sam

2014-01-01

Operators have a crucial role during emergencies at a variety of facilities such as chemical processing plants. When an abnormality occurs in the production process, the operator often has limited time to either take corrective actions or evacuate before the situation becomes deadly. It is crucial that system designers and safety professionals can estimate the time required for a response before procedures and facilities are designed and operations are initiated. There are existing industrial engineering techniques to establish time standards for tasks performed at a normal working pace. However, it is reasonable to expect the time required to take action in emergency situations will be different than working at a normal production pace. It is possible that in an emergency, operators will act faster compared to a normal pace. It would be useful for system designers to be able to establish a time range for operators' response times for emergency situations. This article develops a modeling approach to estimate the time standard range for operators taking corrective actions or following evacuation procedures in emergency situations. This will aid engineers and managers in establishing time requirements for operators in emergency situations. The methodology used for this study combines a well-established industrial engineering technique for determining time requirements (predetermined time standard system) and adjustment coefficients for emergency situations developed by the authors. Numerous videos of workers performing well-established tasks at a maximum pace were studied. As an example, one of the tasks analyzed was pit crew workers changing tires as quickly as they could during a race. The operations in these videos were decomposed into basic, fundamental motions (such as walking, reaching for a tool, and bending over) by studying the videos frame by frame. A comparison analysis was then performed between the emergency pace and the normal working pace operations

Operational limits and conditions and operating procedures for research reactors. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This publication provides practical guidance on all important aspects of developing, formulating and presenting the operational limits and conditions as well as the operating procedures for research reactors. It covers the concept of operational limits and conditions, their content, and the responsibilities of the operating organization with respect to their establishment, modification, documentation and compliance. The guidance also covers the training of operating personnel on performing periodic testing, established by the operational limits and conditions, and operating procedures

Operational behaviour of a reactor normal operation and disturbances

International Nuclear Information System (INIS)

Geyer, K.H.

1982-01-01

During normal operation, the following topics are dealt with: primary and secondary coolant circuits - full load operation - start-up and shutdown - steady state part load diagramm. During disturbances and incidents, the following procedures are discussed: identification and detection of the events - automatic actions - manual actions of the operator - provided indications - explanation of actuated systems - basic information of reactor protection system. (RW)

Condition Monitoring Of Operating Pipelines With Operational Modal Analysis Application

Directory of Open Access Journals (Sweden)

Mironov Aleksey

2015-12-01

Full Text Available In the petroleum, natural gas and petrochemical industries, great attention is being paid to safety, reliability and maintainability of equipment. There are a number of technologies to monitor, control, and maintain gas, oil, water, and sewer pipelines. The paper focuses on operational modal analysis (OMA application for condition monitoring of operating pipelines. Special focus is on the topicality of OMA for definition of the dynamic features of the pipeline (frequencies and mode shapes in operation. The research was conducted using two operating laboratory models imitated a part of the operating pipeline. The results of finite-element modeling, identification of pipe natural modes and its modification under the influence of virtual failure are discussed. The work considers the results of experimental research of dynamic behavior of the operating pipe models using one of OMA techniques and comparing dynamic properties with the modeled data. The study results demonstrate sensitivity of modal shape parameters to modification of operating pipeline technical state. Two strategies of pipeline repair – with continuously condition-based monitoring with proposed technology and without such monitoring, was discussed. Markov chain reliability models for each strategy were analyzed and reliability improvement factor for proposed technology of monitoring in compare with traditional one was evaluated. It is resumed about ability of operating pipeline condition monitoring by measuring dynamic deformations of the operating pipe and OMA techniques application for dynamic properties extraction.

Separable quadratic stochastic operators

International Nuclear Information System (INIS)

Rozikov, U.A.; Nazir, S.

2009-04-01

We consider quadratic stochastic operators, which are separable as a product of two linear operators. Depending on properties of these linear operators we classify the set of the separable quadratic stochastic operators: first class of constant operators, second class of linear and third class of nonlinear (separable) quadratic stochastic operators. Since the properties of operators from the first and second classes are well known, we mainly study the properties of the operators of the third class. We describe some Lyapunov functions of the operators and apply them to study ω-limit sets of the trajectories generated by the operators. We also compare our results with known results of the theory of quadratic operators and give some open problems. (author)

Operator training

International Nuclear Information System (INIS)

Wirstad, J.

1983-12-01

The traditional operator job is changing, which among other things has generated a need for better job training. Surprisingly increased process automation has lead to increased operator qualifications, i.e. basic job training but also up-date and rehearsal training within certain fixed intervals. There are several, similar models for instructional system development available in the literature. One model which is of special interest integrates Operator Training development and Man-Machine Interfaces development. The extent to which Systematic Operator Training has been implemented varies with branches and companies. The nuclear power branch is given as an example in the report. This branch probably represents something better than the average among the process industries.(author)

Operational Efficiency And Customer Satisfaction of Restaurants: Basis For Business Operation Enhancement

Directory of Open Access Journals (Sweden)

Annie Gay Barlan-Espino

2017-02-01

Full Text Available Restaurants’ primary objective is to provide comfort and satisfaction to guest without compromising the operational efficiency of the business. This research aimed to determine the operational efficiency and customer satisfaction of restaurants as a basis for business operation enhancement. Specifically to determine the operational efficiency of the restaurant in terms of kitchen operations and dining operations and the level of customer satisfaction of the restaurant business in terms of: Product, Policies, People, Processes and Proactivity as well as the problems encountered by the restaurant in their operation and customer service. Descriptive research design was used with managers and customers as respondents of the study. It was concluded that majority of the restaurants are operating for more than a year with sufficient number of employees having enough seating capacity that accommodate large volume of customers. Restaurants are efficient on the aspect of kitchen and dining operations and sometimes encountered problems. Customers are satisfied in terms of 5 P’s. It was found out that there is no significant difference in the operational efficiency of restaurant when grouped according to profile variables. An action plan for continuous business operation enhancement on operational efficiency and customer satisfaction was proposed.

Pre-operative assessment and post-operative care in elective shoulder surgery.

Science.gov (United States)

Akhtar, Ahsan; Macfarlane, Robert J; Waseem, Mohammad

2013-01-01

Pre-operative assessment is required prior to the majority of elective surgical procedures, primarily to ensure that the patient is fit to undergo surgery, whilst identifying issues that may need to be dealt with by the surgical or anaesthetic teams. The post-operative management of elective surgical patients begins during the peri-operative period and involves several health professionals. Appropriate monitoring and repeated clinical assessments are required in order for the signs of surgical complications to be recognised swiftly and adequately. This article examines the literature regarding pre-operative assessment in elective orthopaedic surgery and shoulder surgery, whilst also reviewing the essentials of peri- and post-operative care. The need to recognise common post-operative complications early and promptly is also evaluated, along with discussing thromboprophylaxis and post-operative analgesia following shoulder surgery.

International co-operation

International Nuclear Information System (INIS)

1998-01-01

In this part the are reviewed: Co-operation with IAEA; Participation of the Slovakia on the 41 st session of the General Conference; The comprehensive Nuclear-Test-Ban Treaty Organization; Co-operation with the Organization for Economic Co-operation and Development; co-operation with the European Commission; Fulfillment of obligations resulting from the international contracting documents

Operating room management and operating room productivity: the case of Germany.

Science.gov (United States)

Berry, Maresi; Berry-Stölzle, Thomas; Schleppers, Alexander

2008-09-01

We examine operating room productivity on the example of hospitals in Germany with independent anesthesiology departments. Linked to anesthesiology group literature, we use the ln(Total Surgical Time/Total Anesthesiologists Salary) as a proxy for operating room productivity. We test the association between operating room productivity and different structural, organizational and management characteristics based on survey data from 87 hospitals. Our empirical analysis links improved operating room productivity to greater operating room capacity, appropriate scheduling behavior and management methods to realign interests. From this analysis, the enforcing jurisdiction and avoiding advance over-scheduling appear to be the implementable tools for improving operating room productivity.

Ablation characteristics of boding liver according to cool-tip temperature of RFA equipment

Energy Technology Data Exchange (ETDEWEB)

Choi, Young Jae [Dept. of Radiology, Seoul National University Hospital, Seoul (Korea, Republic of); Kim, Jeong Koo [Dept. of Radiological Science, Hanseo University, Seosan (Korea, Republic of)

2015-06-15

This study confirmed the correlation between the change of the cooling water in internal cooling system and the size of the ablation site of bovine liver in RF heat treatment equipment. The bovine liver was resection with 4 x 4 x 4 cm{sup 3} in 2 cm cool-tip and with 6 x 6 x 6 cm{sup 3} in 3 cm cool-tip for the experiments. Area and perimeter of the ablation site for bovine liver were measured by Freehand techniques of MRI. It showed area and perimeter decreased during cool-tip temperature rises 6 and 12 minutes ablation using a 2 cm and 3 cm cool-tip. The correlation of cool-tip temperature and area and perimeter was statistically significant the result are shown (p=.000). The measurements of area and perimeter were more accurate with MRI in actual measurements and MRI for ablation range. The statistical results using Paired sample T-test was also significant (p=.038). The ablation range of bovine liver decreased according as cooling water temperature increases in RF heat treatment equipment for reason of carbonization occurred due to does not accurately pass the RF energy. Therefore, it is considered the effect of RF heat treatment would be increased if the temperature of the cooling water consistently maintain the low temperature in order to reduce the generation of carbide at RF heat treatment and RF energy is delivered accurately.

Ablation characteristics of boding liver according to cool-tip temperature of RFA equipment

International Nuclear Information System (INIS)

Choi, Young Jae; Kim, Jeong Koo

2015-01-01

This study confirmed the correlation between the change of the cooling water in internal cooling system and the size of the ablation site of bovine liver in RF heat treatment equipment. The bovine liver was resection with 4 x 4 x 4 cm"3 in 2 cm cool-tip and with 6 x 6 x 6 cm"3 in 3 cm cool-tip for the experiments. Area and perimeter of the ablation site for bovine liver were measured by Freehand techniques of MRI. It showed area and perimeter decreased during cool-tip temperature rises 6 and 12 minutes ablation using a 2 cm and 3 cm cool-tip. The correlation of cool-tip temperature and area and perimeter was statistically significant the result are shown (p=.000). The measurements of area and perimeter were more accurate with MRI in actual measurements and MRI for ablation range. The statistical results using Paired sample T-test was also significant (p=.038). The ablation range of bovine liver decreased according as cooling water temperature increases in RF heat treatment equipment for reason of carbonization occurred due to does not accurately pass the RF energy. Therefore, it is considered the effect of RF heat treatment would be increased if the temperature of the cooling water consistently maintain the low temperature in order to reduce the generation of carbide at RF heat treatment and RF energy is delivered accurately

THE REALITY OF OPERATIONAL ENVIRONMENT IN MILITARY OPERATIONS

Directory of Open Access Journals (Sweden)

Milan PODHOREC

2012-01-01

Full Text Available The strategic and operational environment affecting national security is complex, multifaceted and variable. Even in the long term, it will be characterized by high dynamics of changes, the growing diversity of players and increasingly complex interdependence of security trends and factors. Threats, risks and their sources are often difficult to localize and nowadays have mostly non-state and transnational character. Many of the specific threats and their impacts are difficult to predict. It all adds up to a further blurring of distinctions between internal and external national security. The operating environment consists of a set of factors arising from the nature of an area where the operation is carried out or will be. Operating environment is also formed by the character of a potential enemy, possibilities of effecting technological and informational areas and further by terrain, climatic conditions and level of own forces and coalition forces.

76 FR 58565 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Seriously...

Science.gov (United States)

2011-09-21

... (Operation Enduring Freedom/ Operation Iraqi Freedom Seriously Injured/Ill Service Member Veteran Worksheet... solicits comments on information provided to Operation Enduring Freedom/Operation Iraqi Freedom veterans... information technology. Title: Operation Enduring Freedom/Operation Iraqi Freedom Seriously Injured/Ill...

Operator theory

CERN Document Server

2015-01-01

A one-sentence definition of operator theory could be: The study of (linear) continuous operations between topological vector spaces, these being in general (but not exclusively) Fréchet, Banach, or Hilbert spaces (or their duals). Operator theory is thus a very wide field, with numerous facets, both applied and theoretical. There are deep connections with complex analysis, functional analysis, mathematical physics, and electrical engineering, to name a few. Fascinating new applications and directions regularly appear, such as operator spaces, free probability, and applications to Clifford analysis. In our choice of the sections, we tried to reflect this diversity. This is a dynamic ongoing project, and more sections are planned, to complete the picture. We hope you enjoy the reading, and profit from this endeavor.

Basic operator theory

CERN Document Server

Gohberg, Israel

2001-01-01

rii application of linear operators on a Hilbert space. We begin with a chapter on the geometry of Hilbert space and then proceed to the spectral theory of compact self adjoint operators; operational calculus is next presented as a nat­ ural outgrowth of the spectral theory. The second part of the text concentrates on Banach spaces and linear operators acting on these spaces. It includes, for example, the three 'basic principles of linear analysis and the Riesz­ Fredholm theory of compact operators. Both parts contain plenty of applications. All chapters deal exclusively with linear problems, except for the last chapter which is an introduction to the theory of nonlinear operators. In addition to the standard topics in functional anal­ ysis, we have presented relatively recent results which appear, for example, in Chapter VII. In general, in writ­ ing this book, the authors were strongly influenced by re­ cent developments in operator theory which affected the choice of topics, proofs and exercises. One ...

76 FR 72243 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Veterans...

Science.gov (United States)

2011-11-22

... (Operation Enduring Freedom/ Operation Iraqi Freedom Veterans Health Needs Assessment) Activity; Comment... Operation Enduring Freedom/ Operation Iraqi Freedom veterans and their families. DATES: Written comments and...: Operation Enduring Freedom/Operation Iraqi Freedom Veterans Health Needs Assessment, VA Form 10-21091. OMB...

Space station operations management

Science.gov (United States)

Cannon, Kathleen V.

1989-01-01

Space Station Freedom operations management concepts must be responsive to the unique challenges presented by the permanently manned international laboratory. Space Station Freedom will be assembled over a three year period where the operational environment will change as significant capability plateaus are reached. First Element Launch, Man-Tended Capability, and Permanent Manned Capability, represent milestones in operational capability that is increasing toward mature operations capability. Operations management concepts are being developed to accomodate the varying operational capabilities during assembly, as well as the mature operational environment. This paper describes operations management concepts designed to accomodate the uniqueness of Space Station Freedoom, utilizing tools and processes that seek to control operations costs.

How do strategic decisions and operative practices affect operating room productivity?

Science.gov (United States)

Peltokorpi, Antti

2011-12-01

Surgical operating rooms are cost-intensive parts of health service production. Managing operating units efficiently is essential when hospitals and healthcare systems aim to maximize health outcomes with limited resources. Previous research about operating room management has focused on studying the effect of management practices and decisions on efficiency by utilizing mainly modeling approach or before-after analysis in single hospital case. The purpose of this research is to analyze the synergic effect of strategic decisions and operative management practices on operating room productivity and to use a multiple case study method enabling statistical hypothesis testing with empirical data. 11 hypotheses that propose connections between the use of strategic and operative practices and productivity were tested in a multi-hospital study that included 26 units. The results indicate that operative practices, such as personnel management, case scheduling and performance measurement, affect productivity more remarkably than do strategic decisions that relate to, e.g., units' size, scope or academic status. Units with different strategic positions should apply different operative practices: Focused hospital units benefit most from sophisticated case scheduling and parallel processing whereas central and ambulatory units should apply flexible working hours, incentives and multi-skilled personnel. Operating units should be more active in applying management practices which are adequate for their strategic orientation.

76 FR 73022 - Agency Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Seriously...

Science.gov (United States)

2011-11-28

... (Operation Enduring Freedom/ Operation Iraqi Freedom Seriously Injured/Ill Service Member Veteran Worksheet... No. 2900-0720.'' SUPPLEMENTARY INFORMATION: Title: Operation Enduring Freedom/Operation Iraqi Freedom... used VA Form 21-0773 as a checklist to ensure they provided Operation Enduring Freedom or Operation...

Insiders and Insider Threats

DEFF Research Database (Denmark)

Hunker, Jeffrey; Probst, Christian W.

2011-01-01

Threats from the inside of an organization’s perimeters are a significant problem, since it is difficult to distinguish them from benign activity. In this overview article we discuss defining properties of insiders and insider threats. After presenting definitions of these terms, we go on to disc......Threats from the inside of an organization’s perimeters are a significant problem, since it is difficult to distinguish them from benign activity. In this overview article we discuss defining properties of insiders and insider threats. After presenting definitions of these terms, we go...

Distribution of sizes of erased loops for loop-erased random walks

OpenAIRE

Dhar, Deepak; Dhar, Abhishek

1997-01-01

We study the distribution of sizes of erased loops for loop-erased random walks on regular and fractal lattices. We show that for arbitrary graphs the probability $P(l)$ of generating a loop of perimeter $l$ is expressible in terms of the probability $P_{st}(l)$ of forming a loop of perimeter $l$ when a bond is added to a random spanning tree on the same graph by the simple relation $P(l)=P_{st}(l)/l$. On $d$-dimensional hypercubical lattices, $P(l)$ varies as $l^{-\\sigma}$ for large $l$, whe...

Shuttle operations era planning for flight operations

Science.gov (United States)

Holt, J. D.; Beckman, D. A.

1984-01-01

The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

Operations management system

Science.gov (United States)

Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

1990-01-01

The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

Reactor operation

CERN Document Server

Shaw, J

2013-01-01

Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

Animal Feeding Operations

Science.gov (United States)

... type=”submit” value=”Submit” /> Healthy Water Home Animal Feeding Operations Recommend on Facebook Tweet Share Compartir ... of Concentrated Animal Feeding Operations (CAFOs) What are Animal Feeding Operations (AFOs)? According to the United States ...

GNSS-based operational monitoring devices for forest logging operation chains

Directory of Open Access Journals (Sweden)

Raimondo Gallo

2013-09-01

Full Text Available The first results of a new approach for implementing operational monitoring tool to control the performance of forest mechanisation chains are proposed and discussed. The solution is based on Global Navigation Satellite System (GNSS tools that are the core of a datalogging system that, in combination with a specific inference-engine, is able to analyse process times, work distances, forward speeds, vehicle tracking and number of working cycles in forest operations. As a consequence the operational monitoring control methods could provide an evaluation of the efficiency of the investigated forest operations. The study has monitored the performance of a tower yarder with crane and processor-head, during logging operations. The field surveys consisted on the installation of the GNSS device directly on the forest equipment for monitoring its movements. Simultaneously the field survey considered the integration of the GNSS information with a time study of work elements based on the continuous time methods supported by a time study board. Additionally, where possible, the onboard computer of the forest machine was also used in order to obtain additional information to be integrated to the GNSS data and the time study. All the recorded GNSS data integrated with the work elements study were thus post-processed through GIS analysis. The preliminary overview about the application of this approach on harvesting operations has permitted to assess a good feasibility of the use of GNSS in the relief of operative times in high mechanised forest chains. Results showed an easy and complete identification of the different operative cycles and elementary operations phases, with a maximum difference between the two methodologies of 10.32%. The use of GNSS installed on forest equipment, integrated with the inferenceengine and also with an interface for data communication or data storage, will permit an automatic or semi-automatic operational monitoring, improving

РОЗРОБКА ТА ДОСЛІДЖЕННЯ МУЛЬТИАГЕНТНОЇ СИСТЕМИ ДЛЯ ОХОРОНИ ОБ’ЄКТА

Directory of Open Access Journals (Sweden)

П. М. Тишин

2017-12-01

Full Text Available The article describes a multi-agent system based on the OWL ontology, taking into account the FIPA standards for the object security system. The given data on the work of intellectual agents and communication between them, as well as proposals for solving the tasks assigned. The proposed concept allows to significantly reduce the amount of electricity consumed during the operation of the object tracking system at a certain perimeter for the purpose of object protection. The range of tasks to be solved is not limited only to the implementation of the multi-agent system, among other things, such algorithms as constructing the proposed route of the object's movement, selecting a camera for tracking the object, diagnosing the system for errors are realized. Due to the peculiarities of the interaction of intelligent agents, this system is subject to simple expansion in the event of an increase in the surveillance area or an increase in the number of sensors in a certain territory. Structurally, the security system consists of a control center with a control system, where an operator sits observing the perimeter around the protected object; a set of microcomputers monitoring a certain sector of the protected area using sensors (main and auxiliary; two rotary cameras providing a visual inspection of the surroundings of the facility. An effective communication algorithm and a set of rules for agents allows you to capture the maximum number of objects using the shared resources of agents of two cameras. To prevent the failure of the elements of the security system, a monitoring system is provided, which in turn is controlled by an intelligent agent that interacts with the sensor agents and the decision support agent. In the future, the results of the study can be used to improve the protection of objects.

Operation training aid device

International Nuclear Information System (INIS)

Yoshimura, Sadanori.

1994-01-01

The device of the present invention evaluates the propriety of an operation which is conducted optionally by a trainee depending on the state of the plant, analyzes the cause of an operation error and aids the preparation of training policy and teaching materials based on the results of the evaluation and the analysis. Namely, an operation data collection device collects operation data for the plant operation conducted by the trainee and the state of the plant during the operation. Since an operation evaluation device evaluates the plant operation in a short period of time based on the evaluation criteria of an operation evaluation knowledge base, an operation error is never overlooked. Accordingly, uniform and highly reliable operation training at definite evaluation criteria can be obtained. In addition, an error-cause analyzing device and a training policy knowledge base analyze the cause of an error inherent to each of the trainee, and it is recorded systematically independently on every trainees. Since a training policy guide device retrieves and presents an operation error and a cause of the error, there can be prepared a training policy incorporating training with respect to the operation error that each of the trainee tends to commit. (I.S.)

Operator behaviors observed in following emergency operating procedure under a simulated emergency

International Nuclear Information System (INIS)

Choi, Sun Yeong; Park, Jin Kyun

2012-01-01

A symptom-based procedure with a critical safety function monitoring system has been established to reduce the operator's diagnosis and cognitive burden since the Three-Mile Island (TMI) accident. However, it has been reported that a symptom-based procedure also requires an operator's cognitive efforts to cope with off-normal events. This can be caused by mismatches between a static model, an emergency operating procedure (EOP), and a dynamic process, the nature of an ongoing situation. The purpose of this study is to share the evidence of mismatches that may result in an excessive cognitive burden in conducting EOPs. For this purpose, we analyzed simulated emergency operation records and observed some operator behaviors during the EOP operation: continuous steps, improper description, parameter check at a fixed time, decision by information previously obtained, execution complexity, operation by the operator's knowledge, notes and cautions, and a foldout page. Since observations in this study are comparable to the results of an existing study, it is expected that the operational behaviors observed in this study are generic features of operators who have to cope with a dynamic situation using a static procedure.

Operational Law Handbook,2007

National Research Council Canada - National Science Library

2007-01-01

... & SOFAs, legal assistance, combating terrorism, domestic operations, noncombatant evacuation operations, special operations, civil affairs, air, sea, and space law, detainee operations, reserve...

Role of check operators in achieving operational excellence at Virginia Power's nuclear stations

International Nuclear Information System (INIS)

Shriver, B.L.; Williams, T.M.; Stewart, W.L.

1987-01-01

Virginia Power has implemented a Check Operator Program as a part of its commitment to excellence in the operation of the North Anna and Surry nuclear power stations. The Check Operator Program utilizes highly qualified licensed personnel to independently evaluate the performance of licensed operators and senior operators during normal, abnormal and simulated emergency conditions. Emphasis is placed upon individual and team performance as well as the procedures and training which support the operators. The check operators report to line management to ensure that their recommendations are implemented into the overall operations philosophy of the power station

Flow-induced vibration analysis of Three Mile Island Unit-2 once-through steam generator tubes. Volume 1. Final report

International Nuclear Information System (INIS)

Johnson, J.R.; Brown, J.C.; Harris, C.E.; McGuinn, E.J.; Simonis, J.C.; Thoren, D.E.

1981-06-01

Tube responses to flow-induced vibration were measured in the top two spans and the tenth span in the B once-through steam generator at Three Mile Island, Unit 2. This program evaluated the effects of flow-induced biration of OTSG tubes during steady-state and transient operation. Twenty-three tubes were instrumented with accelerometers and strain gages in tubes located along the open lane, in the bundle, and at the tenth span. Tube displacements, frequencies, dynamic strains, and mode shapes were determined during steady-state and transient operation. Pressure sensors were installed in the OTSG to measure pressure fluctuations and plant parameters, which were recorded for correlation with tube response. Data analysis results indicate that the steady-state tube response increases with increasing reactor power, with the maximum response (12 mils peak to peak at midspan) at the outer perimeter of the generator in the 16th span

The concept of information support system for operational personnel of operating NPPs

International Nuclear Information System (INIS)

Dunaev, V.G.; Golovanov, V.V.

1993-01-01

The paper has been prepared on the materials of the concept developed by the order of ''Rosenergoatom'' concern. In the present paper the main definitions, the principal objectives and functions of the operator support system (OSS) are stated, a brief analysis of operation features of some existing operator information systems is presented, the main trends of development of operator information support system are given, the way and the sequence for implementation of the systems for operating NPPs are reviewed. In this proposed concept in the first place are considered the information support systems for the operators of the power unit main control rooms, however, the presented principles may be applied while designing information support systems for operators of other control rooms of NPP. 4 refs

Entanglement branching operator

Science.gov (United States)

Harada, Kenji

2018-01-01

We introduce an entanglement branching operator to split a composite entanglement flow in a tensor network which is a promising theoretical tool for many-body systems. We can optimize an entanglement branching operator by solving a minimization problem based on squeezing operators. The entanglement branching is a new useful operation to manipulate a tensor network. For example, finding a particular entanglement structure by an entanglement branching operator, we can improve a higher-order tensor renormalization group method to catch a proper renormalization flow in a tensor network space. This new method yields a new type of tensor network states. The second example is a many-body decomposition of a tensor by using an entanglement branching operator. We can use it for a perfect disentangling among tensors. Applying a many-body decomposition recursively, we conceptually derive projected entangled pair states from quantum states that satisfy the area law of entanglement entropy.

Operation amplifier

NARCIS (Netherlands)

Tetsuya, Saito; Nauta, Bram

2008-01-01

To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. SOLUTION: The operation amplifier comprises: a differential amplifier circuit 1;

Operation Amplifier

NARCIS (Netherlands)

Tetsuya, Saito; Nauta, Bram

2011-01-01

PROBLEM TO BE SOLVED: To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. SOLUTION: The operation amplifier comprises: a

Operation Amplifier

NARCIS (Netherlands)

Tetsuya, S.; Nauta, Bram

2007-01-01

PROBLEM TO BE SOLVED: To provide an operation amplifier which improves power source voltage removal ratios while assuring phase compensation characteristics, and therefore can be realized with a small-scale circuit and low power consumption. ; SOLUTION: The operation amplifier comprises: a

Accelerator operations

International Nuclear Information System (INIS)

Anon.

1979-01-01

Operations of the SuperHILAC, the Bevatron/Bevalac, and the 184-inch Synchrocyclotron during the period from October 1977 to September 1978 are discussed. These include ion source development, accelerator facilities, the Heavy Ion Spectrometer System, and Bevelac biomedical operations

Emergency operation determination system

International Nuclear Information System (INIS)

Miki, Tetsushi.

1993-01-01

The system of the present invention can determine an emergency operation coping with abnormal events occurring during nuclear plant operation without replying on an operator's judgement. That is, the system of the present invention comprises an intelligence base which divides and classifies the aims of the plant operation for the function, structure and operation manual and puts them into network. Degree of attainment for the extend of the status normality is determined on every aim of operation based on various kinds of measured data during plant operation. For a degree of attainment within a predetermined range, it is judged that an emergency operation is possible although this is in an abnormal state. Degree of emergency is determined by a fuzzy theory based on the degree of attainment, variation coefficient for the degree of attainment and the sensitivity to external disturbance as parameters. Priority for the degree of emergency on every operation aims is determined by comparison. Normality is successively checked for the determined operation aims. As a result, equipments as objects of abnormality suppressing operation are specified, and the operation amount of the equipments as objects are determined so that the measuring data are within a predetermined range. (I.S.)

Motor-operated gearbox efficiency

International Nuclear Information System (INIS)

DeWall, K.G.; Watkins, J.C.; Bramwell, D.; Weidenhamer, G.H.

1996-01-01

Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, the authors compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators they tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer

Motor-operated gearbox efficiency

Energy Technology Data Exchange (ETDEWEB)

DeWall, K.G.; Watkins, J.C.; Bramwell, D. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Weidenhamer, G.H.

1996-12-01

Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, the authors compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators they tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer.

Motor-operator gearbox efficiency

International Nuclear Information System (INIS)

DeWall, K.G.; Watkins, J.C.; Bramwell, D.

1996-01-01

Researchers at the Idaho National Engineering Laboratory recently conducted tests investigating the operating efficiency of the power train (gearbox) in motor-operators typically used in nuclear power plants to power motor-operated valves. Actual efficiency ratios were determined from in-line measurements of electric motor torque (input to the operator gearbox) and valve stem torque (output from the gearbox) while the operators were subjected to gradually increasing loads until the electric motor stalled. The testing included parametric studies under reduced voltage and elevated temperature conditions. As part of the analysis of the results, we compared efficiency values determined from testing to the values published by the operator manufacturer and typically used by the industry in calculations for estimating motor-operator capabilities. The operators we tested under load ran at efficiencies lower than the running efficiency (typically 50%) published by the operator manufacturer

Air surveillance

Energy Technology Data Exchange (ETDEWEB)

Patton, G.W.

1995-06-01

This section of the 1994 Hanford Site Environmental Report summarizes the air surveillance and monitoring programs currently in operation at that Hanford Site. Atmospheric releases of pollutants from Hanford to the surrounding region are a potential source of human exposure. For that reason, both radioactive and nonradioactive materials in air are monitored at a number of locations. The influence of Hanford emissions on local radionuclide concentrations was evaluated by comparing concentrations measured at distant locations within the region to concentrations measured at the Site perimeter. This section discusses sample collection, analytical methods, and the results of the Hanford air surveillance program. A complete listing of all analytical results summarized in this section is reported separately by Bisping (1995).

Air surveillance

International Nuclear Information System (INIS)

Patton, G.W.

1995-01-01

This section of the 1994 Hanford Site Environmental Report summarizes the air surveillance and monitoring programs currently in operation at that Hanford Site. Atmospheric releases of pollutants from Hanford to the surrounding region are a potential source of human exposure. For that reason, both radioactive and nonradioactive materials in air are monitored at a number of locations. The influence of Hanford emissions on local radionuclide concentrations was evaluated by comparing concentrations measured at distant locations within the region to concentrations measured at the Site perimeter. This section discusses sample collection, analytical methods, and the results of the Hanford air surveillance program. A complete listing of all analytical results summarized in this section is reported separately by Bisping (1995)

Report on the behalf of the Parliamentary Office for the Assessment of Scientific and Technological Choices on drones and safety of nuclear installations. Restricted report of the hearing of the 24 November 2014 at 2 p.m., report of the public hearing on the same day at 4.30 p.m., and presentation of conclusions on the 26 November 2014. Nr 2523, Nr 267

International Nuclear Information System (INIS)

Le Deaut, Jean-Yves; Sido, Bruno

2015-01-01

The first part of this document partially reports discussions between different experts on the responses and threats related to the flyover of nuclear installations by drones. This hearing more particularly addressed the following topics: drones and national defence, the external protection of sensitive installations, and safety within facility perimeter. Hearing of experts is followed by a discussion involving these experts and members of Parliament. The second part reports hearings of experts on the issues of control and regulation related to this type of flyover. The following topics have been addressed: the various actors of the drone sector (manufacturers, operators, users, and regulation), the role distribution along actors for nuclear safety and security. A debate is also reported

14 CFR 121.434 - Operating experience, operating cycles, and consolidation of knowledge and skills.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Operating experience, operating cycles, and... Qualifications § 121.434 Operating experience, operating cycles, and consolidation of knowledge and skills. (a... position, the operating experience, operating cycles, and the line operating flight time for consolidation...

Reactor operating procedures for start up of continuously operated chemical plants

NARCIS (Netherlands)

Verwijs, J.W.; Verwijs, J.W.; Kösters, P.H.; van den Berg, Henderikus; Westerterp, K.R.; Kosters, P.G.H.

1995-01-01

Rules are presented for the startup of an adiabatic tubular reactor, based on a qualitative analysis of the dynamic behavior of continuously-operated vapor- and liquid-phase processes. The relationships between the process dynamics, operating criteria, and operating constraints are investigated,

Composite operators in QCD

International Nuclear Information System (INIS)

Sonoda, Hidenori

1992-01-01

We give a formula for the derivatives of a correlation function of composite operators with respect to the parameters (i.e. the strong fine structure constant and the quark mass) of QCD in four- dimensional euclidean space. The formula is given as spatial integration of the operator conjugate to a parameter. The operator product of a composite operator and a conjugate operator has an unintegrable part, and the formula requires divergent subtractions. By imposing consistency conditions we drive a relation between the anomalous dimensions of the composite operators and the unintegrable part of the operator product coefficients. (orig.)

International co-operation in the field of operational safety

International Nuclear Information System (INIS)

Dupuis, M.C.

1988-10-01

Operational safety in nuclear power plants is without doubt a field where international co-operation is in constant progress. Accounting for over 80 per cent of the 400 reactors in service throughout the world, the menber countries of the OECD Nuclear Energy Agency (NEA) are constantly striving to improve the exchange and use of the wealth of information to be gained not just from power plant accidents and incidents but from the routine operation of these facilities. The Committee on the Safety of Nuclear Installations (CSNI) helps the Steering Committee for Nuclear Energy to meet the NEA's objectives in the safety field, namely: - to promote co-operation between the safety bodies of member countries - to contribute to the safety and regulation of nuclear activities. The CSNI relies on the technical back-up of several different working groups made up of experts appointed by the member countries. For the past three years I have had the honour of chairing Principal Working Group 1 (PWG 1), which deals with operating experience and human factor. It is in this capacity that I will attempt to outline the group's various activities and its findings illustrated by a few examples

Influence of the gate edge on the reverse leakage current of AlGaN/GaN HEMTs

Directory of Open Access Journals (Sweden)

YongHe Chen

2015-09-01

Full Text Available By comparing the Schottky diodes of different area and perimeter, reverse gate leakage current of AlGaN/GaN high mobility transistors (HEMT at gate bias beyond threshold voltage is studied. It is revealed that reverse current consists of area-related and perimeter-related current. An analytical model of electric field calculation is proposed to obtain the average electric field around the gate edge at high revers bias and estimate the effective range of edge leakage current. When the reverse bias increases, the increment of electric field is around the gate edge of a distance of ΔL, and perimeter-related gate edge current keeps increasing. By using the calculated electric field and the temperature-dependent current-voltage measurements, the edge gate leakage current mechanism is found to be Fowler-Nordheim tunneling at gate bias bellows -15V caused by the lateral extended depletion region induced barrier thinning. Effective range of edge current of Schottky diodes is about hundred to several hundred nano-meters, and is different in different shapes of Schottky diodes.

[New visual field testing possibilities (a preliminary report)].

Science.gov (United States)

Erichev, V P; Ermolaev, A P; Antonov, A A; Grigoryan, G L; Kosova, D V

2018-01-01

There are currently no portable mobile perimeters that allow visual field testing outside ophthalmologist's examination rooms. To develop a mobile perimetry technique based on use of a virtual reality headset (VR). The study involved 26 patients (30 eyes) with II-III stage primary open-angle glaucoma (POAG) with compensated IOP. Perimetry was performed for each patient twice - on Humphrey analyzer (test 30-2, 76 points) and employing similar strategy on a perimeter integrated into VR headset (Total Vision, Russia). Visual field testing was performed with an interval from 1 hour to 3 days. The results were comparatively analyzed. Patients tolerated the examination well. Comparative analysis of preliminary perimetry results obtained with both methods showed high degree of identity, so the results were concluded to be comparable. By visually isolating the wearer, VR headset achieves elimination of distractions and stable light conditions for visual field testing. The headset-perimeter is compact, mobile, easily transportable, can be used in the work of visiting medical teams and for examination at home.

Operational efficiency of forest energy supply chains in different operational environments

Energy Technology Data Exchange (ETDEWEB)

Roeser, D

2012-06-15

Ambitious international efforts to combat climate change have lead to a large interest about the use of forest biomass for energy in many countries. In order to meet the expected growing demand in the future, it will be necessary to improve operational efficiency of existing forest energy supply chains and support the establishment of efficient supply chains in new operational environments. The thesis applied a three-dimensional approach which examines forest energy supply chains from a technical, social and economic viewpoint. Four case studies in different operational environments have been carried out to investigate the applicability of the three dimensional approach to improve operational efficiency. The technical dimension was investigated in Paper 1 and 2. In Paper 1, the effects of climatic conditions, covering of piles, and partial debarking on drying of roundwood were studied in four experimental trials located in Scotland, Finland and Italy. In Paper 2, the chipping of forest biomass was studied in two different operational environments. The investigation of the social dimension in Paper 3 provides insights into the setup of two different supply chains through business process mapping and simulation. Finally, in paper 4, which investigated the economic dimension, an analysis of the effect of the operational environment on technology selection and design of supply chains, is presented. The thesis demonstrates that the chosen approach was practical to investigate the complex relationships between the chosen technologies and different supply chain actors and stakeholders thereby contributing to maintain or improve operational efficiency of forest energy supply chains. Due to its applicability in different operational environments, the approach is also suitable in a more global context. Furthermore, it captures the effect of different aspects and characteristics of the various operational environments on the setup and organization of supply chains. This will

Operational support of a safe operating envelope for fuel

International Nuclear Information System (INIS)

Chapman, T.J.; Gibb, R.A.

1998-01-01

The mandate of a station safety analysis group is to ensure that the station is operated and maintained in a manner consistent with the basis for our understanding of the safety consequences of process or human failures. As operating experience has developed an awareness of the significance of fuel manufacture and operating conditions on safety consequences has also grown. This awareness has led to a program that is designed to ensure that these influences are appropriately considered. This paper describes the projects that make up this program. (author)

Intra-operative application of optical coherence tomography with an operating microscope.

Science.gov (United States)

Just, T; Lankenau, E; Hüttmann, G; Pau, H W

2009-09-01

To introduce the use of optical coherence tomography with an operating microscope for intra-operative evaluation of the human larynx. A specially equipped operating microscope with integrated spectral domain optical coherence tomography apparatus was used during microlaryngoscopy. Technical improvements in optical coherence tomography equipment (e.g. pilot beam, variable focal distance, improved image quality and integration into an operating microscope) have enabled greater sensitivity and imaging speed and a non-contact approach. Spectral domain optical coherence tomography now enables a better correlation between optical coherence tomography images and histological findings. With this new technology, the precision of biopsy can be improved during microlaryngoscopy. Use of this new optical coherence tomography technology, integrated into an operating microscope, enables the surgeon to define the biopsy site location and resection plane precisely, while the optical zoom of the operating microscope can be used over the complete range.

Mobile Operating Systems

OpenAIRE

Vipin Kamboj; Hitesh Gupta

2012-01-01

Mobile phones are used by every people in today’s life. We use mobile phones without knowing the different factors that a mobile used including its technology, operating system, CPU ,RAM etc. Many types of operating system are used by different mobile. Every operating system has their advantage

Advanced Tele-operation

International Nuclear Information System (INIS)

Decreton, M.

1998-01-01

Maintenance, repair, and dismantling operations in nuclear facilities have to be performed remotely when high radiation doses exclude hands-on operation, but also to minimize contamination risks and occupational doses to the operators. Computer-aided and sensor-based tele-operation enhances safety, reliability, and performance by helping the operator in difficult tasks with poor remote environmental perception. The objectives of work in this domain are to increase the scientific knowledge of the studied phenomena, to improve the interpretation of data, to improve the piloting og experimental devices during irradiation, to reveal and to understand possible unexpected phenomena occurring during irradiation. This scientific report describes the achievements for 1997 in the area of radiation tolerance for of remote-sensing, optical fibres and optical fibre sensors

Noncommutative operational calculus

Directory of Open Access Journals (Sweden)

Henry E. Heatherly

1999-12-01

Full Text Available Oliver Heaviside's operational calculus was placed on a rigorous mathematical basis by Jan Mikusinski, who constructed an algebraic setting for the operational methods. In this paper, we generalize Mikusi'{n}ski's methods to solve linear ordinary differential equations in which the unknown is a matrix- or linear operator-valued function. Because these functions can be zero-divisors and do not necessarily commute, Mikusi'{n}ski's one-dimensional calculus cannot be used. The noncommuative operational calculus developed here,however, is used to solve a wide class of such equations. In addition, we provide new proofs of existence and uniqueness theorems for certain matrix- and operator valued Volterra integral and integro-differential equations. Several examples are given which demonstrate these new methods.

The AECL operator companion

International Nuclear Information System (INIS)

Lupton, L.R.; Anderson, L.L.; Basso, R.A.J.

1989-11-01

As CANDU plants become more complex, and are operated under tighter constraints and for longer periods between outages, plant operations staff will have to absorb more information to correctly and rapidly respond to upsets. A development program is underway at AECL to use expert systems and interactive media tools to assist operations staff of existing and future CANDU plants. The complete system for plant information access and display, on-line advice and diagnosis, and interactive operating procedures is called the Operator Companion. A prototype, consisting of operator consoles, expert systems and simulation modules in a distributed architecture, is currently being developed to demonstrate the concepts of the Operator Companion

A proposal for operator team behavior model and operator's thinking mechanism

International Nuclear Information System (INIS)

Yoshimura, Seiichi; Takano, Kenichi; Sasou, Kunihide

1995-01-01

Operating environment in huge systems like nuclear power plants or airplanes is changing rapidly with the advance of computer technology. It is necessary to elucidate thinking process of operators and decision-making process of an operator team in abnormal situations, in order to prevent human errors under such environment. The Central Research Institute of Electric Power Industry is promoting a research project to establish human error prevention countermeasures by modeling and simulating the thinking process of operators and decision-making process of an operator team. In the previous paper, application of multilevel flow modeling was proposed to a mental model which conducts future prediction and cause identification, and the characteristics were verified by experienced plant operators. In this paper, an operator team behavior model and a fundamental operator's thinking mechanism especially 'situation understanding' are proposed, and the proposals are evaluated by experiments using a full-scale simulator. The results reveal that some assumptions such as 'communication is done between a leader and a follower' are almost appropriate and that the situation understanding can be represented by 'probable candidates for cause, determination of a parameter which changes when an event occurs, determination of parameters which are influenced by the change of the previous parameter, determination of a principal parameter and future prediction of the principal parameter'. (author)

Licensed operating reactors

International Nuclear Information System (INIS)

1989-11-01

The US Nuclear Regulatory Commission's monthly Licensed Operating Reactors Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units is provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the errata page

International co-operation

International Nuclear Information System (INIS)

Klinda, J.; Lieskovska, Z.

1998-01-01

Within the Union Nations (UN) framework, the Slovak Republic participated in following activities on environment protection co-operation: UN European Economic Commission, UN Industrial Development Organization, UN Development Programme, UN Human Habitat Organization, UN Environment Programme, and UN Commission on Sustainable Development. Relevant activities of the Slovak Republic in these co-operations as well as in European Union and OECD activities are reviewed. International conventions and other forms of multilateral co-operation, bilateral co-operation, and international programmes and projects in which the Slovak Republic took participate are presented

International co-operation for reactor safety: the World Association of Nuclear Operators

International Nuclear Information System (INIS)

Eckered, T.

1989-01-01

On 5 and 6 October 1987, senior representatives of most of the world's nuclear operators met in Paris with Lord Marshall of the UK Central Electricity Generating Board (CEGB) as Chairman. They resolved to strengthen the existing links and co-operation among nuclear operators by setting up the World Association of Nuclear Operators (Wano). The mission of the association is to be: 'to maximize the safety and reliability of the operation of nuclear power stations by exchanging information, encouraging comparison and stimulating emulation among nuclear power station operators.' The formation of Wano presents some information technology problems of a rather special kind that have to be solved before Wano can begin operation. The representatives at the Paris meeting therefore appointed a steering committee under Lord Marshall's chairmanship to formulate detailed proposals. The leaders of the world's nuclear operators will meet again in Moscow on 15-17 May 1989 in order to ratify the steering committee proposals and appoint the first Wano Board of Governors. A small interim secretariat is already working in London. (author)

Operational Circulars

CERN Multimedia

2003-01-01

Operational Circular N° 4 - April 2003 Conditions for use by members of the CERN personnel of vehicles belonging to or rented by CERN - This circular has been drawn up. Operational Circular N° 5 - October 2000 Use of CERN computing facilities - Further details on the personal use of CERN computing facilities Operational Circular N° 5 and its Subsidiary Rules http://cern.ch/ComputingRules defines the rules for the use of CERN computing facilities. One of the basic principles governing such use is that it must come within the professional duties of the user concerned, as defined by the user's divisional hierarchy. However, personal use of the computing facilities is tolerated or allowed provided : a) It is in compliance with Operational Circular N° 5 and not detrimental to official duties, including those of other users; b) the frequency and duration is limited and there is a negligible use of CERN resources; c) it does not constitute a political, commercial and/or profit-making activity; d) it is not...

Analysis on Isolation Condenser Operation by Fukushima Daiichi Unit 1 Operators

International Nuclear Information System (INIS)

Kim, Man Cheol

2014-01-01

Fukushima Daiichi nuclear accident resulted in the core damage in three reactors and the release of considerable amount of radioactive material to the environment, not to mention significant social impact and anti-nuclear atmosphere all around the world. This paper provides a review of the findings related to shift operators' operation of the isolation condenser in Unit 1 to examine shift operators' response to the situation. Based on the review of the findings, a situation assessment model was developed to analyze shift operators' understanding on whether core cooling was successfully performed in Unit 1 through the operation of isolation condenser. It was found that lack of information could be one of the main causes for the failure in core cooling by the IC in Unit 1. It is also recommended that the differences in the mathematical model for the situation assessment and that of the real operator need to be further investigated

Analysis on Isolation Condenser Operation by Fukushima Daiichi Unit 1 Operators

Energy Technology Data Exchange (ETDEWEB)

Kim, Man Cheol [Chungang University, Seoul (Korea, Republic of)

2014-08-15

Fukushima Daiichi nuclear accident resulted in the core damage in three reactors and the release of considerable amount of radioactive material to the environment, not to mention significant social impact and anti-nuclear atmosphere all around the world. This paper provides a review of the findings related to shift operators' operation of the isolation condenser in Unit 1 to examine shift operators' response to the situation. Based on the review of the findings, a situation assessment model was developed to analyze shift operators' understanding on whether core cooling was successfully performed in Unit 1 through the operation of isolation condenser. It was found that lack of information could be one of the main causes for the failure in core cooling by the IC in Unit 1. It is also recommended that the differences in the mathematical model for the situation assessment and that of the real operator need to be further investigated.

Sustainable Building Operation

DEFF Research Database (Denmark)

Jensen, Jesper Ole

2009-01-01

of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

Assessing Operational Situations

DEFF Research Database (Denmark)

Zhang, Xinxin

In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

Locations and attributes of utility-scale solar power facilities in Colorado and New Mexico, 2011

Science.gov (United States)

Ignizio, Drew A.; Carr, Natasha B.

2012-01-01

The data series consists of polygonal boundaries for utility-scale solar power facilities (both photovoltaic and concentrating solar power) located within Colorado and New Mexico as of December 2011. Attributes captured for each facility include the following: facility name, size/production capacity (in MW), type of solar technology employed, location, state, operational status, year the facility came online, and source identification information. Facility locations and perimeters were derived from 1-meter true-color aerial photographs (2011) produced by the National Agriculture Imagery Program (NAIP); the photographs have a positional accuracy of about ±5 meters (accessed from the NAIP GIS service: http://gis.apfo.usda.gov/arcgis/services). Solar facility perimeters represent the full extent of each solar facility site, unless otherwise noted. When visible, linear features such as fences or road lines were used to delineate the full extent of the solar facility. All related equipment including buildings, power substations, and other associated infrastructure were included within the solar facility. If solar infrastructure was indistinguishable from adjacent infrastructure, or if solar panels were installed on existing building tops, only the solar collecting equipment was digitized. The "Polygon" field indicates whether the "equipment footprint" or the full "site outline" was digitized. The spatial accuracy of features that represent site perimeters or an equipment footprint is estimated at +/- 10 meters. Facilities under construction or not fully visible in the NAIP imagery at the time of digitization (December 2011) are represented by an approximate site outline based on the best available information and documenting materials. The spatial accuracy of these facilities cannot be estimated without more up-to-date imagery – users are advised to consult more recent imagery as it becomes available. The "Status" field provides information about the operational

Computer algebra and operators

Science.gov (United States)

Fateman, Richard; Grossman, Robert

1989-01-01

The symbolic computation of operator expansions is discussed. Some of the capabilities that prove useful when performing computer algebra computations involving operators are considered. These capabilities may be broadly divided into three areas: the algebraic manipulation of expressions from the algebra generated by operators; the algebraic manipulation of the actions of the operators upon other mathematical objects; and the development of appropriate normal forms and simplification algorithms for operators and their actions. Brief descriptions are given of the computer algebra computations that arise when working with various operators and their actions.

Operator substitution

NARCIS (Netherlands)

Hautus, M.L.J.

1994-01-01

Substitution of an operator into an operator-valued map is defined and studied. A Bezout-type remainder theorem is used to derive a number of results. The tensor map is used to formulate solvability conditions for linear matrix equations. Some applications to system theory are given, in particular

Chipping operations and efficiency in different operational environments

Energy Technology Data Exchange (ETDEWEB)

Roeser, D.; Mola-Yudego, B.; Prinz, R.; Emer, B.; Sikanen, L., e-mail: dominik.roser@metla.fi

2012-11-01

This research analyses the productivity of energy wood chipping operations at several sites in Austria and Finland. The aim of the work is to examine the differences in productivity and the effects of the operational environment for the chipping of bioenergy at the roadside. Furthermore, the study quantifies the effects of different variables such as forest energy assortments, tree species, sieve size and machines on the overall productivity of chipping. The results revealed that there are significant differences in the chipping productivity in Austria and Finland which are largely based on the use of different sieve sizes. Furthermore, the different operational environments in both countries, as well as the characteristics of the raw material also seem to have an effect on productivity. In order to improve the chipping productivity, particularly in Central European conditions, all relevant stakeholders need to work jointly to find solutions that will allow a greater variation of chip size. Furthermore, in the future more consideration has to be given to the close interlinkage between the chipper, crane and grapple. As a result, investments costs can be optimized and operational costs and stress on the machines reduced. (orig.)

Operation guide device

International Nuclear Information System (INIS)

Oohashi, Hideaki.

1982-01-01

Purpose: To enable a reactor operator to perform safety and sure inspection for a reactor and take manual start-up operations for the necessary systems at optimum timing with neither misoperation nor misjudging after the occurrence of reactor accidents. Constitution: If a signal judging circuit judges the generation of an accident signal for a reactor, the circuit issues an output signal to start the time counting operation of a time counter thereby inform the elapse of time after the occurrence of the reactor accident. Further, a time signal generated on every predetermined time from the time counter and a process signal indicating the reactor status are logically judged and, if the conditions for taking manual start-up operations, are satisfied, a start-up instruction signal is generated. An information signal is formed depending on the start-up instruction and the content of the start-up instruction is displayed on every predetermined time by the information signal, whereby the operator can perform the manual start-up operations at the optimum timings. (Moriyama, K.)

on differential operators on w 1,2 space and fredholm operators

African Journals Online (AJOL)

A selfadjoint differential operator defined over a closed and bounded interval on Sobolev space which is a dense linear subspace of a Hilbert space over the same interval is considered and shown to be a Fredholm operator with index zero. KEY WORDS: Sobolev space, Hilbert space, dense subspace, Fredholm operator

Inter-operability

International Nuclear Information System (INIS)

Plaziat, J.F.; Moulin, P.; Van Beurden, R.; Ballet, E.

2005-01-01

Building an internal gas market implies establishing harmonized rules for cross border trading between operators. To that effect, the European association EASEE-gas is carrying out standards and procedures, commonly called 'inter-operability'. Set up in 2002, the Association brings together all segments of the gas industry: producers, transporters, distributors, traders and shippers, suppliers, consumers and service providers. This workshop presents the latest status on issues such as barriers to gas trade in Europe, rules and procedures under preparation by EASEE-gas, and the implementation schedule of these rules by operators. This article gathers 5 presentations about this topic given at the gas conference

Science Operations Management

Science.gov (United States)

Squibb, Gael F.

1984-10-01

The operation teams for the Infrared Astronomical Satellite (IRAS) included scientists from the IRAS International Science Team. The scientific decisions on an hour-to-hour basis, as well as the long-term strategic decisions, were made by science team members. The IRAS scientists were involved in the analysis of the instrument performance, the analysis of the quality of the data, the decision to reacquire data that was contaminated by radiation effects, the strategy for acquiring the survey data, and the process for using the telescope for additional observations, as well as the processing decisions required to ensure the publication of the final scientific products by end of flight operations plus one year. Early in the project, two science team members were selected to be responsible for the scientific operational decisions. One, located at the operations control center in England, was responsible for the scientific aspects of the satellite operations; the other, located at the scientific processing center in Pasadena, was responsible for the scientific aspects of the processing. These science team members were then responsible for approving the design and test of the tools to support their responsibilities and then, after launch, for using these tools in making their decisions. The ability of the project to generate the final science data products one year after the end of flight operations is due in a large measure to the active participation of the science team members in the operations. This paper presents a summary of the operational experiences gained from this scientific involvement.

Biomedical programs operations plans

Science.gov (United States)

Walbrecher, H. F.

1974-01-01

Operational guidelines for the space shuttle life sciences payloads are presented. An operational assessment of the medical experimental altitude test for Skylab, and Skylab life sciences documentation are discussed along with the operations posture and collection of space shuttle operational planning data.

77 FR 7243 - Proposed Information Collection (Operation Enduring Freedom/Operation Iraqi Freedom Veterans...

Science.gov (United States)

2012-02-10

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0728] Proposed Information Collection (Operation Enduring Freedom/ Operation Iraqi Freedom Veterans Health Needs Assessment) Activities Under OMB....'' SUPPLEMENTARY INFORMATION: Title: Operation Enduring Freedom/Operation Iraqi Freedom Veterans Health Needs...

Operator interface programs for KSTAR operation

International Nuclear Information System (INIS)

Lee, Sangil; Park, Mikyung; Park, Jinseop; Na, Hoonkyun; Kwon, M.

2013-01-01

Beginning the first plasma discharging experiment of KSTAR since 2008, KSTAR performed the third plasma discharging experiment by 2010. During the experiment of three times, KSTAR OPerator Interface (OPI) programs have been developed for KSTAR operation by itself. OPI programs used in KSTAR were implemented by KSTAR widget plug-in Toolkit (KWT). The KWT means the plug-in library implemented by Qt-based user interface development software. The main purpose of developing the KWT library is to implement full automation libraries having interface with the automated EPICS channel access (CA) guaranteeing the flexibility for requirements of operators. In addition, it has advantages in minimizing human code error and maximizing utilization of the limited human resource. According to the increasing of control systems, a number of OPI servers connected to one EPICS gateway server caused the connection problem and increased the amount of the network data packets. To solve these problems, an algorithm of “CachedChannelAccess” for shared memory base was implemented into an inner logic of the KWT library. KSTAR control system monitoring (CSM) program is one of applications developed by using KWT library. The function of CSM program is to notify alarm to operators by checking health status of every server's network health status and resource (cpu, memory, network packets, disk usage rate and system/user defined process) usage state. Another application is a post-shot sequencing program which is activated after every shot is completed. This application is to display major plasma parameters and diagnostic data in chart form, to save this data to database, and to transfer a chart image file to a web server. This paper describes the technical details how to develop OPI applications which have high productivity using Qt on the EPICS-based control system

Operator interface programs for KSTAR operation

Energy Technology Data Exchange (ETDEWEB)

Lee, Sangil, E-mail: leesi@nfri.re.kr; Park, Mikyung, E-mail: mkpark@nfri.re.kr; Park, Jinseop, E-mail: linupark@nfri.re.kr; Na, Hoonkyun, E-mail: hkna@nfri.re.kr; Kwon, M., E-mail: kwonm@nfri.re.kr

2013-11-15

Beginning the first plasma discharging experiment of KSTAR since 2008, KSTAR performed the third plasma discharging experiment by 2010. During the experiment of three times, KSTAR OPerator Interface (OPI) programs have been developed for KSTAR operation by itself. OPI programs used in KSTAR were implemented by KSTAR widget plug-in Toolkit (KWT). The KWT means the plug-in library implemented by Qt-based user interface development software. The main purpose of developing the KWT library is to implement full automation libraries having interface with the automated EPICS channel access (CA) guaranteeing the flexibility for requirements of operators. In addition, it has advantages in minimizing human code error and maximizing utilization of the limited human resource. According to the increasing of control systems, a number of OPI servers connected to one EPICS gateway server caused the connection problem and increased the amount of the network data packets. To solve these problems, an algorithm of “CachedChannelAccess” for shared memory base was implemented into an inner logic of the KWT library. KSTAR control system monitoring (CSM) program is one of applications developed by using KWT library. The function of CSM program is to notify alarm to operators by checking health status of every server's network health status and resource (cpu, memory, network packets, disk usage rate and system/user defined process) usage state. Another application is a post-shot sequencing program which is activated after every shot is completed. This application is to display major plasma parameters and diagnostic data in chart form, to save this data to database, and to transfer a chart image file to a web server. This paper describes the technical details how to develop OPI applications which have high productivity using Qt on the EPICS-based control system.

The operation and maintenance manual

International Nuclear Information System (INIS)

Stoll, A.; Krotil, H.; Klein, W.

1976-01-01

The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

Simulation of the measure of the microparticle size distribution in two dimensions

International Nuclear Information System (INIS)

Lameiras, F.S.; Pinheiro, P.

1987-01-01

Different size distributions of plane figures were generated in a computer as a simply connected network. These size distributions were measured by the Saltykov method for two dimensions. The comparison between the generated and measured distributions showed that the Saltkov method tends to measure larger scattering than the real one and to move the maximum of the real distribution to larger diameters. These erros were determined by means of the ratio of the perimeter of the figures per unit area directly measured and the perimeter calculated from the size distribution obtained by using the SaltyKov method. (Author) [pt

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and Emergency ...

Reactor core operation management system

International Nuclear Information System (INIS)

Sato, Tomomi.

1992-01-01

Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.)

Reactor core operation management system

Energy Technology Data Exchange (ETDEWEB)

Sato, Tomomi.

1992-05-28

Among operations of periodical inspection for a nuclear power plant, sequence, time and safety rule, as well as necessary equipments and the number thereof required for each of the operation are determined previously for given operation plannings, relevant to the reactor core operations. Operation items relative to each of coordinates of the reactor core are retrieved and arranged based on specified conditions, to use the operation equipments effectively. Further, a combination of operations, relative to the reactor core coordinates with no physical interference and shortest in accordance with safety rules is judged, and the order and the step of the operation relevant to the entire reactor core operations are planned. After the start of the operation, the necessity for changing the operation sequence is judged depending on the judgement as to whether it is conducted according to the safety rule and the deviation between the plan and the result, based on the information for the progress of each of the operations. Alternatively, the operation sequence and the step to be changed are planned again in accordance with the requirement for the change of the operation planning. Then, the shortest operation time can be planned depending on the simultaneous operation impossible condition and the condition for the operation time zone determined by labor conditions. (N.H.).

Design, permitting, and construction issues associated with closure of the Panna Maria uranium tailings impoundment

International Nuclear Information System (INIS)

Strachan, C.L.; Raabe, K.L.

1997-01-01

In 1992, Panna Maria Uranium Operations (PMUO) initiated licensing and engineering activities for closure of the Panna Maria mill and 150-acre tailings impoundment located in southeast Texas. Closure of the tailings impoundment is permitted by license amendment through the Texas Natural Resources Conservation Commission (TNRCC), and based on closure criteria outlined in Texas regulations. The closure plan for the Panna Maria tailings impoundment was submitted for Texas regulatory agency review in April 1993, with details of the closure plan modified in 1994, 1995, and 1996. The closure plan included a multi-layered cover over the regraded tailings surface which was designed for long-term isolation of tailings, reduction of radon emanation to regulated levels, and reduction of infiltration to TNRCC-accepted levels. The cover and embankment slope surfaces and surrounding areas were designed to provide acceptable erosional stability as compared to runoff velocities from the Probable Maximum Precipitation event. Cover materials were selected from on-site materials and evaluated for suitability based on permeability, radon attenuation, and soil dispersivity characteristics. Off-site materials were used when necessary. The cover over the tailings has a maximum slope of 0.5 percent, and the regraded embankment slopes outside the perimeter of the impoundment have a maximum slope of 20 percent. All reclaimed slopes are covered with topsoil and revegetated. A riprap-lined channel is to be used to convey runoff from within the perimeter of the reclaimed impoundment to the north of the impoundment

Analysis of remote operating systems for space-based servicing operations, volume 1

Science.gov (United States)

1985-01-01

A two phase study was conducted to analyze and develop the requirements for remote operating systems as applied to space based operations for the servicing, maintenance, and repair of satellites. Phase one consisted of the development of servicing requirements to establish design criteria for remote operating systems. Phase two defined preferred system concepts and development plans which met the requirements established in phase one. The specific tasks in phase two were to: (1) identify desirable operational and conceptual approaches for selected mission scenarios; (2) examine the potential impact of remote operating systems incorporated into the design of the space station; (3) address remote operating systems design issues, such as mobility, which are effected by the space station configuration; and (4) define the programmatic approaches for technology development, testing, simulation, and flight demonstration.

Thermal Operating Modes

International Nuclear Information System (INIS)

Bechtel SAIC Company

2002-01-01

Higher and lower temperature operating modes (e.g., above and below the boiling point of water) are alternative approaches to managing the heat produced by the radioactive decay of spent nuclear fuel. Current analyses indicate that a repository at the Yucca Mountain site is likely to comply with applicable safety standards regardless of the particular thermal operating mode. Both modes have potential advantages and disadvantages. With a higher temperature operating mode (HTOM), waste packages (WPs) can be placed closer together. This reduces the number of drifts, the required emplacement area, construction costs, and occupational risks to construction workers. In addition, the HTOM would minimize the amount of water that might contact the waste for hundreds of years after closure. On the other hand, higher temperatures introduce uncertainties in the understanding of the long-term performance of the repository because of uncertainties in the thermal effects on WP lifetime and the near-field environment around the drifts. A lower temperature operating mode (LTOM) has the potential to reduce uncertainties in long-term performance of the repository by limiting the effects of temperature on WP lifetime and on the near-field environment around the drifts. Depending on the combination of operating parameters, a LTOM could require construction of additional drifts, a larger emplacement area, increased construction costs, increased occupational risks to construction works, and a longer period of ventilation than a HTOM. The repository design for the potential Yucca Mountain site is flexible and can be constructed and operated in various operating modes to achieve specific technical objectives, accommodate future policy decisions, and use of new information. For example, the flexible design can be operated across a range of temperatures and can be tailored to achieve specific thermal requirements in the future. To accommodate future policy decisions, the repository can be

Towards Sustainability: Effective Operations Strategies, Quality Management and Operational Excellence in Banking

OpenAIRE

Vesna Tornjanski; Sanja Marinković; Željka Jančić

2017-01-01

This paper sets out to extend and deepen the understanding the ways toward economic sustainability through efficient and effective growth operations strategies, quality management and operational excellence in banking. In this study we define new quality management practices based on developed conceptual architecture of digital platform for operations function in banking. Additionally, we employ decision making framework consisted of two parts: introduction of new operations services using To...

Modern operating systems

CERN Document Server

Tanenbaum, Andrew S

2015-01-01

Modern Operating Systems, Fourth Edition, is intended for introductory courses in Operating Systems in Computer Science, Computer Engineering, and Electrical Engineering programs. It also serves as a useful reference for OS professionals ' The widely anticipated revision of this worldwide best-seller incorporates the latest developments in operating systems (OS) technologies. The Fourth Edition includes up-to-date materials on relevant'OS. Tanenbaum also provides information on current research based on his experience as an operating systems researcher. ' Modern Operating Systems, Third Editionwas the recipient of the 2010 McGuffey Longevity Award. The McGuffey Longevity Award recognizes textbooks whose excellence has been demonstrated over time.'http://taaonline.net/index.html " Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: ' *Provide Practical Detail on the Big Picture Concepts: A clear and entertaining writing s...

Medical supply on contingency military operations: experience from Operation GRITROCK.

Science.gov (United States)

Robinson, J P; Reeves, P

2015-01-01

Medical supply during military operations has the ability to affect the efficacy of the operation being undertaken, either negatively or positively. An appropriately-managed maritime platform with a robust medical supply chain during transit and on arrival in theatre is the main aim. A secure supply chain will reduce any implications that logistics may have with regard to capability, and negate the effects of deficiencies of short shelf life items occurring over time and during use in high tempo operations.

Upgrade of reactor operation technology

International Nuclear Information System (INIS)

Itoh, Hideaki; Suzuki, Toshiaki; O-kawa, Toshikatsu

2003-01-01

To improve operational reliability and availability, the operation technology for a fast reactor was developed in the ''JOYO''. This report describes the upgrading of the simulator, plant operation management tools and fuel handling system for the MK-III core operation. The simulator was modified to the MK-III version to verify operation manuals, and to train operators in MK-III operation. The plant operation management tool was replaced on the operation experience to increase the reliability and efficiency of plant management works relating to plant operation and maintenance. To shorten the refueling period, the fuel handling system was upgraded to full automatic remote control. (author)

Development of advanced automatic operation system for nuclear ship. 1. Perfect automatic normal operation

International Nuclear Information System (INIS)

Nakazawa, Toshio; Yabuuti, Noriaki; Takahashi, Hiroki; Shimazaki, Junya

1999-02-01

Development of operation support system such as automatic operating system and anomaly diagnosis systems of nuclear reactor is very important in practical nuclear ship because of a limited number of operators and severe conditions in which receiving support from others in a case of accident is very difficult. The goal of development of the operation support systems is to realize the perfect automatic control system in a series of normal operation from the reactor start-up to the shutdown. The automatic control system for the normal operation has been developed based on operating experiences of the first Japanese nuclear ship 'Mutsu'. Automation technique was verified by 'Mutsu' plant data at manual operation. Fully automatic control of start-up and shutdown operations was achieved by setting the desired value of operation and the limiting value of parameter fluctuation, and by making the operation program of the principal equipment such as the main coolant pump and the heaters. This report presents the automatic operation system developed for the start-up and the shutdown of reactor and the verification of the system using the Nuclear Ship Engineering Simulator System. (author)

What is the scope of the operator's standard of care in wellsite operations?

International Nuclear Information System (INIS)

Petch, J.

1999-01-01

Joint ownership is a standard operating procedure for many oil and gas companies and has led to the development of standardized operating agreements. Under the terms of these agreements, one party assumes responsibility for operating and developing the joint interests for the benefit of all working parties. The standard of care imposed upon an operator towards non-operators regarding jointly owned oil and gas operations, is discussed, with an emphasis on whether such an operator is liable to fellow participants for acts fo gross negligence or wilful misconduct. The starting point in the analysis is the proposition that the standard of care for an operation of joint interests may be specified and agreed to by the joint owners in their contracts governing their relationship. A discussion is included of two different standards of care by the courts, whether Alberta courts are finding the gross negligence or wilful standard applicable, and the need for more fundamental change to the industry standard form agreement before the gross negligence/wilful misconduct standard will be applied by Alberta courts. The examination is conducted for the most part with reference to the standard forms of joint operating proceedures in widespread use, the Canadian Association of Petroleum Landman forms of Operating Procedure

Operating the plant, quality assurance, and the job of the operating staff, Volume Twelve

International Nuclear Information System (INIS)

Anon.

1986-01-01

Subject matter includes operating the plant (the role of the operator, the control room, plant technical specifications, plant operating procedures, initial startup program, BWR/PWR plant startup, BWR/PWR steady state power operation, BWR/PWR transient operation, emergency operation), quality assurance (what is quality, what is quality control, quality assurance includes quality control, government regulation and quality assurance, administrative controls for nuclear power plants, the necessity of reviews and audits, practical quality assurance), and the job of the operating staff (the plant operating staff, plant safety, first aid and resuscitation, general plant hazards, personnel protective equipment, handling chemicals, handling compressed gas, equipment repair and maintenance, communicating with others

Glass operational file. Operational models and integration calculations

International Nuclear Information System (INIS)

Ribet, I.

2004-01-01

This document presents the operational choices of dominating phenomena, hypotheses, equations and numerical data of the parameters used in the two operational models elaborated for the calculation of the glass source terms with respect to the waste packages considered: existing packages (R7T7, AVM and CEA glasses) and future ones (UOX2, UOX3, UMo, others). The overall operational choices are justified and demonstrated and a critical analysis of the approach is systematically proposed. The use of the operational model (OPM) V 0 → V r , realistic, conservative and robust, is recommended for glasses with a high thermal and radioactive load, which represent the main part of the vitrified wastes. The OPM V 0 S, much more overestimating but faster to parameterize, can be used for the long-term behaviour forecasting of glasses with low thermal and radioactive load, considering today's lack of knowledge for the parameterization of a V 0 → V r type OPM. Efficiency estimations have been made for R7T7 glasses (OPM V 0 → V r ) and AVM glasses (OPM V 0 S), which correspond to more than 99.9% of the vitrified waste packages activity. The very contrasted results obtained, illustrate the importance of the choice of operational models: in conditions representative of a geologic disposal, the estimation of R7T7-type package lifetime exceeds several hundred thousands years. Even if the estimated lifetime of AVM packages is much shorter (because of the overestimating character of the OPM V 0 S), the release potential radiotoxicity is of the same order as the one of R7T7 packages. (J.S.)

Purge ventilation operability

International Nuclear Information System (INIS)

Marella, J.R.

1995-01-01

A determination of minimum requirements for purge exhaust ventilation system operability has been performed. HLWE and HLW Regulatory Program personnel have evaluated the various scenarios of equipment conditions and HLWE has developed the requirements for purge exhaust systems. This report is provided to document operability requirements to assist Tank Farm personnel to determine whether a system is operable/inoperable and to define required compensatory actions

Intra-operative colloid administration increases the clearance of a post-operative fluid load

DEFF Research Database (Denmark)

Borup, Tine; Hahn, Robert; Holte, K

2009-01-01

using volume kinetics based on the plasma dilution alone. The pre-operative plasma clearance was compared with the post-operative plasma clearance and patients served as their own control. RESULTS: The urinary excretion averaged 350 ml for the pre-operative infusion and 612 ml post-operatively, which...

Operation Peace for Galilee: An Operational Analysis with Relevance Today

National Research Council Canada - National Science Library

Thomas, Wilbert

1998-01-01

.... Operation Peace for Galilee was epitomized by expert planning and operational excellence, as the IDF achieved its stated aim of establishing a PLO-free 40 kilometer buffer zone north of its border within 40 hours...

Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

Licensed operating reactors

International Nuclear Information System (INIS)

1990-01-01

The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units is provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the ERRATA page. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

Operations Between Functions

DEFF Research Database (Denmark)

Gardner, Richard J.; Kiderlen, Markus

A structural theory of operations between real-valued (or extended-real-valued) functions on a nonempty subset A of Rn is initiated. It is shown, for example, that any operation ∗ on a cone of functions containing the constant functions, which is pointwise, positively homogeneous, monotonic......, and associative, must be one of 40 explicitly given types. In particular, this is the case for operations between pairs of arbitrary, or continuous, or differentiable functions. The term pointwise means that (f ∗g)(x) = F(f(x), g(x)), for all x ∈ A and some function F of two variables. Several results in the same...... spirit are obtained for operations between convex functions or between support functions. For example, it is shown that ordinary addition is the unique pointwise operation between convex functions satisfying the identity property, i.e., f ∗ 0 = 0 ∗ f = f, for all convex f, while other results classify Lp...

Licensed operating reactors

International Nuclear Information System (INIS)

1989-06-01

The US Nuclear Regulatory Commission's monthly LICENSED OPERATING REACTORS Status Summary Report provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management, from the Headquarters Staff of NRC's Office of Inspection and Enforcement, from NRC's Regional Offices, and from utilities. Since all of the data concerning operation of the units are provided by the utility operators less than two weeks after the end of the month, necessary corrections to published information are shown on the ERRATA page. This report is divided into three sections: the first contains monthly highlights and statistics for commercial operating units, and errata from previously reported data; the second is a compilation of detailed information on each unit, provided by NRC Regional Offices, IE Headquarters and the Utilities; and the third section is an appendix for miscellaneous information such as spent fuel storage capability, reactor years of experience and non-power reactors in the United States

Cohering power of quantum operations

Energy Technology Data Exchange (ETDEWEB)

Bu, Kaifeng, E-mail: bkf@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China); Kumar, Asutosh, E-mail: asukumar@hri.res.in [Harish-Chandra Research Institute, Chhatnag Road, Jhunsi, Allahabad 211019 (India); Homi Bhabha National Institute, Anushaktinagar, Mumbai 400094 (India); Zhang, Lin, E-mail: linyz@zju.edu.cn [Institute of Mathematics, Hangzhou Dianzi University, Hangzhou 310018 (China); Wu, Junde, E-mail: wjd@zju.edu.cn [School of Mathematical Sciences, Zhejiang University, Hangzhou 310027 (China)

2017-05-18

Highlights: • Quantum coherence. • Cohering power: production of quantum coherence by quantum operations. • Study of cohering power and generalized cohering power, and their comparison for differentmeasures of quantum coherence. • Operational interpretation of cohering power. • Bound on cohering power of a generic quantum operation. - Abstract: Quantum coherence and entanglement, which play a crucial role in quantum information processing tasks, are usually fragile under decoherence. Therefore, the production of quantum coherence by quantum operations is important to preserve quantum correlations including entanglement. In this paper, we study cohering power–the ability of quantum operations to produce coherence. First, we provide an operational interpretation of cohering power. Then, we decompose a generic quantum operation into three basic operations, namely, unitary, appending and dismissal operations, and show that the cohering power of any quantum operation is upper bounded by the corresponding unitary operation. Furthermore, we compare cohering power and generalized cohering power of quantum operations for different measures of coherence.

Network operating system

Science.gov (United States)

1985-01-01

Long-term and short-term objectives for the development of a network operating system for the Space Station are stated. The short-term objective is to develop a prototype network operating system for a 100 megabit/second fiber optic data bus. The long-term objective is to establish guidelines for writing a detailed specification for a Space Station network operating system. Major milestones are noted. Information is given in outline form.

ISACC in Operations

Science.gov (United States)

2014-06-01

19th floor of a Hotel to overlook the entire event. Page 12 of 17 Figure 6: The SPF Operations Centre overlooking the Event Lessons...have a cheap system to help them solve their immediate operational needs. b. Medium enterprises, that need to have quick customization of the...Optimize” tools to help them advance their current operations to a higher service satisfaction level seen by the public. 32. Common across all

Gyroaveraging operations using adaptive matrix operators

Science.gov (United States)

Dominski, Julien; Ku, Seung-Hoe; Chang, Choong-Seock

2018-05-01

A new adaptive scheme to be used in particle-in-cell codes for carrying out gyroaveraging operations with matrices is presented. This new scheme uses an intermediate velocity grid whose resolution is adapted to the local thermal Larmor radius. The charge density is computed by projecting marker weights in a field-line following manner while preserving the adiabatic magnetic moment μ. These choices permit to improve the accuracy of the gyroaveraging operations performed with matrices even when strong spatial variation of temperature and magnetic field is present. Accuracy of the scheme in different geometries from simple 2D slab geometry to realistic 3D toroidal equilibrium has been studied. A successful implementation in the gyrokinetic code XGC is presented in the delta-f limit.

PyOperators: Operators and solvers for high-performance computing

Science.gov (United States)

Chanial, P.; Barbey, N.

2012-12-01

PyOperators is a publicly available library that provides basic operators and solvers for small-to-very large inverse problems ({http://pchanial.github.com/pyoperators}). It forms the backbone of the package PySimulators, which implements specific operators to construct an instrument model and means to conveniently represent a map, a timeline or a time-dependent observation ({http://pchanial.github.com/pysimulators}). Both are part of the Tamasis (Tools for Advanced Map-making, Analysis and SImulations of Submillimeter surveys) toolbox, aiming at providing versatile, reliable, easy-to-use, and optimal map-making tools for Herschel and future generation of sub-mm instruments. The project is a collaboration between 4 institutes (ESO Garching, IAS Orsay, CEA Saclay, Univ. Leiden).

Towards Sustainability: Effective Operations Strategies, Quality Management and Operational Excellence in Banking

Directory of Open Access Journals (Sweden)

Vesna Tornjanski

2017-02-01

Full Text Available This paper sets out to extend and deepen the understanding the ways toward economic sustainability through efficient and effective growth operations strategies, quality management and operational excellence in banking. In this study we define new quality management practices based on developed conceptual architecture of digital platform for operations function in banking. Additionally, we employ decision making framework consisted of two parts: introduction of new operations services using Total Unduplicated Reach and Frequency (TURF statistical analysis and segregation of core from actual and augmented operations services utilizing Analytic Network Process (ANP method based on BOCR model. Proposed quality management practices were used for the first time in this paper for particular purposes and have the high potential to impact the excellence in banking business. The study can contribute to operations management, quality management, innovation management, IT management, business process management and decision making in service organizations.

Licensed operating reactors

International Nuclear Information System (INIS)

1989-08-01

THE OPERATING UNITS STATUS REPORT - LICENSED OPERATING REACTORS provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management from the Headquarters staff of NRC's Office of Enforcement (OE), from NRC's Regional Offices, and from utilities. The three sections of the report are: monthly highlights and statistics for commercial operating units, and errata from previously reported data; a compilation of detailed information on each unit, provided by NRC's Regional Offices, OE Headquarters and the utilities; and an appendix for miscellaneous information such as spent fuel storage capability, reactor-years of experience and non-power reactors in the US

Licensed operating reactors

International Nuclear Information System (INIS)

1990-04-01

The Operating Units Status Report --- Licensed Operating Reactors provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management from the Headquarters staff on NRC's Office of Enforcement (OE), from NRC's Regional Offices, and from utilities. The three sections of the report are: monthly highlights and statistics for commercial operating units, and errata from previously reported data; a compilation of detailed information on each unit, provided by NRC's Regional Offices, OE Headquarters and the utilities; and an appendix for miscellaneous information such as spent fuel storage capability, reactor-years of experience and non- power reactors in the US

Operator companion

International Nuclear Information System (INIS)

Natalizio, A.; Anderson, J.W.D.; Sills, H.E.

1988-01-01

Abundant, cheap computing power has provided industry with a far greater opportunity than was available one or two decades ago to automate industrial processes and to improve the man-machine interface. Exciting innovations in knowledge representation methods arising from artificial intelligence research pave the way for advanced support systems for assisting plant operators. AECL has recognized the importance of knowledge based system technology, particularly expert systems, in the achievement of this objective and also, as a strategic technology to be fully exploited in the next generation of CANDU reactors. Operator Companion, an expert system intended to diagnose plant faults and advise the operator on appropriate restoring or corrective actions, is a major undertaking which is receiving support within the research and engineering groups of AECL

Operative arthroscopy.

Science.gov (United States)

Guhl, J F

1979-01-01

In a period of 20 months, over 200 patients (age ranged from high school students to middle-aged persons) with knee injuries were treated by operative arthroscopy. The majority of the injuries were incurred while the patients had been participating in athletic events, either competitive or recreational. Operative arthroscopy offers the advantage of shortened hospital stay, rapid rehabilitation, lack of disfiguring scar, and reduced costs. Patients are followed yearly after the first postoperative year. Improved long-term results from diagnostic and operative arthroscopy, as compared to conventional surgical procedures, are expected. The proof of those expectations will be determined in the next several years as this group of patients requiring partial meniscectomies or procedures for pathologic and degenerative conditions is reevaluated.

Mission operations technology

Science.gov (United States)

Varsi, Giulio

In the last decade, the operation of a spacecraft after launch has emerged as a major component of the total cost of the mission. This trend is sustained by the increasing complexity, flexibility, and data gathering capability of the space assets and by their greater reliability and consequent longevity. The trend can, however, be moderated by the progressive transfer of selected functions from the ground to the spacecraft and by application, on the ground, of new technology. Advances in ground operations derive from the introduction in the mission operations environment of advanced microprocessor-based workstations in the class of a few million instructions per second and from the selective application of artificial intelligence technology. In the last few years a number of these applications have been developed, tested in operational settings and successfully demonstrated to users. Some are now being integrated in mission operations facilities. An analysis of mission operations indicates that the key areas are: concurrent control of multiple missions; automated/interactive production of command sequences of high integrity at low cost; automated monitoring of spacecraft health and automated aides for fault diagnosis; automated allocation of resources; automated processing of science data; and high-fidelity, high-speed spacecraft simulation. Examples of major advances in selected areas are described.

Knowledge base for power plant operation and its application to operation guide

International Nuclear Information System (INIS)

Doi, Atsushi; Sakaguchi, Toshiaki

1986-01-01

The present study is aimed at constructing a knowledge base for supervisory control operation in power plants and developing an operation guidance by using it. Examination is made to provide dignosis procedures on the basis of an existing alarm system. An operation guidance procedure for diagnosis is proposed which is to be followed when several alarms are sounded simultaneously in a power plant, and application of the procedure to an existing plant is examined. The operation manual for the plant includes 75 description items for six alarms. It is shown that the number of items related to these alarms can be reduced by 70 % by rearranging them according to the procedure. Another investigation is conducted to provide an operation manual for diagnosis to be used when one alarm is sounded in a plant. The quality of the manual developed is on nearly the same level with that for the existing plant examined. When a knowledge base is to be constructed from an existing operation manual, the processing operation generally requires a certain level of linguistic comprehension ability, such as for judgment of synonyms. It is demonstrated that the procedure proposed here is able to develop a high-quality knowledge base with standardized terminology. The procedure can also serve to construct operation manuals for plants in other industrial fields. (Nogami, K.)

Comparison of Management-Operational Efficiency of Agricultural Machinery Operating Systems (Case Study Alborz Province

Directory of Open Access Journals (Sweden)

A Omidi

2017-10-01

Full Text Available Introduction Measuring the efficiency of operating systems in comparison with the methods of comparing the performance of systems explains the various dimensions of issues such as, the lack of full use of agricultural machinery capacity, improper selection of machine, incorrect use of machinery, ownership, etc.. Any improvement in operating system conditions reduces costs,, consumption of inputs, increases the efficiency of production factors and consequently reduces the price and increases agricultural profitability. The main objective of this research is to compare the operational-management efficiency of operating systems in Alborz province and comparison of managerial and operational efficiency of agricultural machinery farming systems by calculating the efficiency of its major components in agricultural machinery farming systems including efficiency, social, economic, technical-operational and managerial and ranking them in order to understand the optimal model of agricultural machinery systems. Materials and Methods This research is a survey study.The study population was beneficiaries of agricultural machinery in the Alborz province which in the multi-stage random sample was determined. Alborz province has 31,438 agricultural operations, of which 543 are exploited agricultural machinery. Cochran formula was used to determine sample size. Since, Cronbach's alpha coefficient greater than 0.7 was obtained by questionnaire, the reliability of the questionnaires was assessed as desirable. To calculate the efficiency the component data were extracted from 4 specialized questionnaires after the initial examination and encoding, then they were analyzed using the software SPSS, MCDM Engine. TOPSIS techniques were used for ranking managerial performance operating system for operating agricultural machinery Alborz province. Results and Discussion The results showed that social efficiency of dedicated-professional operation with an average of 6.6 had

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... ACS ACS and Veterans Diversity at ACS ... and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

Interim site characterization report and ground-water monitoring program for the Hanford site solid waste landfill

International Nuclear Information System (INIS)

Fruland, R.M.; Hagan, R.A.; Cline, C.S.; Bates, D.J.; Evans, J.C.; Aaberg, R.L.

1989-07-01

Federal and state regulations governing the operation of landfills require utilization of ground-water monitoring systems to determine whether or not landfill operations impact ground water at the point of compliance (ground water beneath the perimeter of the facility). A detection-level ground-water monitoring system was designed, installed, and initiated at the Hanford Site Solid Waste Landfill (SWL). Chlorinated hydrocarbons were detected at the beginning of the ground-water monitoring program and continue to be detected more than 1 year later. The most probable source of the chlorinated hydrocarbons is washwater discharged to the SWL between 1985 and 1987. This is an interim report and includes data from the characterization work that was performed during well installation in 1987, such as field observations, sediment studies, and geophysical logging results, and data from analyses of ground-water samples collected in 1987 and 1988, such as field parameter measurements and chemical analyses. 38 refs., 27 figs., 8 tabs

The Remote Security Station (RSS) final report

International Nuclear Information System (INIS)

Pletta, J.B.; Amai, W.A.; Klarer, P.; Frank, D.; Carlson, J.; Byrne, R.

1992-10-01

The Remote Security Station (RSS) was developed by Sandia National Laboratories for the Defense Nuclear Agency to investigate issues pertaining to robotics and sensor fusion in physical security systems. This final report documents the status of the RSS program at its completion in April 1992. The RSS system consists of the Man Portable Security Station (MaPSS) and the Telemanaged Mobile Security Station (TMSS), which are integrated by the Operator's Control Unit (OCU) into a flexible exterior perimeter security system. The RSS system uses optical, infrared, microwave, and acoustic intrusion detection sensors in conjunction with sensor fusion techniques to increase the probability of detection and to decrease the nuisance alarm rate of the system. Major improvements to the system developed during the final year are an autonomous patrol capability, which allows TMSS to execute security patrols with limited operator interaction, and a neural network approach to sensor fusion, which significantly improves the system's ability to filter out nuisance alarms due to adverse weather conditions

Operational Strategy of CBPs for load balancing of Operators in Advanced Main Control Room

International Nuclear Information System (INIS)

Kim, Seunghwan; Kim, Yochan; Jung, Wondea

2014-01-01

With the using of a computer-based control room in an APR1400 (Advanced Pressurized Reactor-1400), the operators' behaviors in the main control room had changed. However, though the working environment of operators has been changed a great deal, digitalized interfaces can also change the cognitive tasks or activities of operators. First, a shift supervisor (SS) can confirm/check the conduction of the procedures and the execution of actions of board operators (BOs) while confirming directly the operation variables without relying on the BOs. Second, all operators added to their work the use of a new CBP and Soft Controls, increasing their procedural workload. New operational control strategies of CBPs are necessary for load balancing of operator's task load in APR1400. In this paper, we compared the workloads of operators in an APR1400 who work with two different usages of the CBP. They are SS oriented usage and SS-BO collaborative usage. In this research, we evaluated the workloads of operators in an advanced main control room by the COCOA method. Two types of CBP usages were defined and the effects of these usages on the workloads were investigated. The obtained results showed that the workloads between operators in a control room can be balanced according to the CBP usages by assigning control authority to the operators

Operational Strategy of CBPs for load balancing of Operators in Advanced Main Control Room

Energy Technology Data Exchange (ETDEWEB)

Kim, Seunghwan; Kim, Yochan; Jung, Wondea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

With the using of a computer-based control room in an APR1400 (Advanced Pressurized Reactor-1400), the operators' behaviors in the main control room had changed. However, though the working environment of operators has been changed a great deal, digitalized interfaces can also change the cognitive tasks or activities of operators. First, a shift supervisor (SS) can confirm/check the conduction of the procedures and the execution of actions of board operators (BOs) while confirming directly the operation variables without relying on the BOs. Second, all operators added to their work the use of a new CBP and Soft Controls, increasing their procedural workload. New operational control strategies of CBPs are necessary for load balancing of operator's task load in APR1400. In this paper, we compared the workloads of operators in an APR1400 who work with two different usages of the CBP. They are SS oriented usage and SS-BO collaborative usage. In this research, we evaluated the workloads of operators in an advanced main control room by the COCOA method. Two types of CBP usages were defined and the effects of these usages on the workloads were investigated. The obtained results showed that the workloads between operators in a control room can be balanced according to the CBP usages by assigning control authority to the operators.

Some Trends and Applications of Operational Research/Management Science to Operations Management

Directory of Open Access Journals (Sweden)

Ramón Companys Pascual

2015-01-01

Full Text Available The editor suggested us to write about our point of view on the current use of Operations Research techniques applied to the Operations Management and about its future evolution. With some of unconsciousness we accept it, but it is obvious that our vision, even though we try to do our best, will be partial and biased. Hence the title chosen shows signs of prudence. More caution have been applied to the development where, after a glance at the past and reflection on the abundance of new denominations without content, we consider five aspects that, nowadays, acquire increasing importance and that will strongly influence in future developments. Among the five aspects two correspond to trends in the field of operations research techniques, one is a philosophy in the field of operations management, another to an area of the company and the last one to an industrial sector in which operations management, supported by operations research methods, is taking a predominant role.

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... at ACS ACS and Veterans Diversity at ACS ... and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

Implementation of an operator model with error mechanisms for nuclear power plant control room operation

International Nuclear Information System (INIS)

Suh, Sang Moon; Cheon, Se Woo; Lee, Yong Hee; Lee, Jung Woon; Park, Young Taek

1996-01-01

SACOM(Simulation Analyser with Cognitive Operator Model) is being developed at Korea Atomic Energy Research Institute to simulate human operator's cognitive characteristics during the emergency situations of nuclear power plans. An operator model with error mechanisms has been developed and combined into SACOM to simulate human operator's cognitive information process based on the Rasmussen's decision ladder model. The operational logic for five different cognitive activities (Agents), operator's attentional control (Controller), short-term memory (Blackboard), and long-term memory (Knowledge Base) have been developed and implemented on blackboard architecture. A trial simulation with a scenario for emergency operation has been performed to verify the operational logic. It was found that the operator model with error mechanisms is suitable for the simulation of operator's cognitive behavior in emergency situation

Persistent pain and comorbidity among Operation Enduring Freedom/Operation Iraqi Freedom/operation New Dawn veterans.

Science.gov (United States)

Higgins, Diana M; Kerns, Robert D; Brandt, Cynthia A; Haskell, Sally G; Bathulapalli, Harini; Gilliam, Wesley; Goulet, Joseph L

2014-05-01

Chronic pain is a significant concern for the Veterans Health Administration (VHA), with chronic pain conditions among those most frequently reported by Operation Enduring Freedom (OEF)/Operation Iraqi Freedom (OIF)/Operation New Dawn (OND) veterans. The current study examined VHA electronic medical record data to examine variation in demographics and high prevalence and high impact medical and mental health conditions in order to characterize the differences between patients with persistent pain and no pain. A conservative operational definition of chronic or "persistent pain" based on multiple indicators of pain (i.e., pain intensity ratings, prescription opioids, pain clinic visits, International Classification of Diseases, Ninth Revision codes) was employed. Analyses included the entire roster of longitudinal clinical data on OEF/OIF/OND veterans who used VHA care to compare those with persistent pain with those with no clinical evidence of pain. Results of logistic regression models suggest that sex, race, education, military variables, body mass index (BMI), traumatic brain injury (TBI), and mental health conditions, but not age, reliably discriminate the two groups. Those with persistent pain were more likely to be Black, female, on active duty, enlisted, Army service members, have a high school education or less, and have diagnoses of mood disorders, post-traumatic stress disorder, substance use disorders, anxiety disorders, TBI, and have a BMI consistent with overweight and obesity. The operational definition of chronic pain used in this study may have research implications for examining predictors of incident and chronic pain. These data have important clinical implications in that addressing comorbid conditions of persistent pain may improve adaptive coping and functioning in these patients. Wiley Periodicals, Inc.

ANALYSIS OF OPTIMUM OPERATING MODES OF POWER TRANSFORMERS UNDER OPERATING CONDITIONS

Directory of Open Access Journals (Sweden)

I. V. Khomenko

2016-12-01

Full Text Available Purpose. The study of parallel operation optimal modes of transformer equipment for a variety of operating conditions: same or different types of transformers, with or without reactive power flows. Methodology. Losses of energy in transformers make 30 % of all losses. Therefore the choice of the economically justified parallel operation of transformers is effective action to reduce losses. Typically, in the calculations of reactive power flows in the transformers are not taken into account. It is interesting to analyze the optimal operating conditions of transformers with and without reactive power flows. Results. Calculations for transformers in distribution networks showed that the inclusion of reactive power flows in transformers significant impact on the calculated optimum regimes of transformers.

Operational Research : Congress of APDIO, the Portuguese Operational Research Society

CERN Document Server

Almeida, João; Oliveira, José; Pinto, Alberto

2018-01-01

This proceedings book presents selected contributions from the XVIII Congress of APDIO (the Portuguese Association of Operational Research) held in Valença on June 28–30, 2017. Prepared by leading Portuguese and international researchers in the field of operations research, it covers a wide range of complex real-world applications of operations research methods using recent theoretical techniques, in order to narrow the gap between academic research and practical applications. Of particular interest are the applications of, nonlinear and mixed-integer programming, data envelopment analysis, clustering techniques, hybrid heuristics, supply chain management, and lot sizing and job scheduling problems. In most chapters, the problems, methods and methodologies described are complemented by supporting figures, tables and algorithms.   The XVIII Congress of APDIO marked the 18th installment of the regular biannual meetings of APDIO – the Portuguese Association of Operational Research. The meetings bring toget...

RTNS-II operations guidebook

International Nuclear Information System (INIS)

Heikkinen, D.W.

1985-01-01

This guidebook is intended to provide training criteria, procedures and guidelines for operation of the RTNS-II neutron sources and ancilliary equipment. Use of this document requires full knowledge of the RTNS-II Facility Safety Procedure (FSP) and any Operational Safety Procedures (OSP) in effect. The RTNS-II FSP defines the hazards which may be encountered at RTNS-II and defines the procedures which must be followed in performing any task including operations. The purpose of this document is to provide a central source of detailed information concerning systems and equipment used in operating the RTNS-II neutron sources on a day-to-day basis. All members of the Operations Group are expected to be familiar with its contents. It is also intended to be used in training new members of the Operations Group

Joint Operation Planning

National Research Council Canada - National Science Library

2006-01-01

.... It sets forth joint doctrine to govern the joint operation planning activities and performance of the Armed Forces of the United States in joint operations, and provides the joint doctrinal basis...

The operation and maintenance manual

International Nuclear Information System (INIS)

Klein, W.; Krotil, H.; Stoll, A.

1975-01-01

The Operating Manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the Operating Manual. It contains, appropriately arranged, the necessary system and other diagrams, drawings, lists, licensing documents and similar material, which are necessary for understanding the design, for testing, for obtaining the operating licence and for the operation of individual systems and of the entire plant. (orig./RW) [de

Elk and Deer Study, Material Disposal Area G, Technical Area 54: Source document

Energy Technology Data Exchange (ETDEWEB)

J. K. Ferenbaugh; P. R. Fresquez; M. H. Ebinger; G. J. Gonzales; P. A. Jordan

1999-09-01

As nuclear research has become more prevalent, environmental contamination from the disposal of radioactive waste has become a prominent issue. At Los Alamos National Laboratory (LANL) in northern New Mexico, radioactive contamination from disposal operations has raised some very specific concerns. Material Disposal Area G (Area G) is the primary low-level radioactive waste disposal site at LANL and occupies an area adjacent to land belonging to the Native American community of the Pueblo of San Ildefonso. Analyses of soil and vegetation collected from the perimeter of Area G have shown concentrations of radionuclides greater than background concentrations established for northern New Mexico. As a result, Pueblo residents had become concerned that contaminants from Area G could enter tribal lands through various ecological pathways. The residents specifically questioned the safety of consuming meat from elk and deer that forage near Area G and then migrate onto tribal lands. Consequently, this study addresses the uptake of {sup 3}H, {sup 90}Sr, {sup tot}U, {sup 238}Pu, {sup 239}Pu, {sup 241}Am, and {sup 137}Cs by elk (Cervus elaphus) and deer (Odocoileus hemionus) that forage around the perimeter of Area G and the associated doses to the animals and to humans who consume these animals. Radionuclide uptake by and internal dose to animals was estimated using equations modified from National Council on Radiological Protection Report 76. The Residual Radiation computer code was used to estimate the external dose to animals and the dose to humans consuming meat. Soil and water concentrations from the perimeter of Area G and from background regions in northern New Mexico were averaged over 4 years (1993--1996) and used as input data for the models. Concentration estimates generated by the model correspond to the concentration range measured in actual tissue samples from elk and deer collected at LANL. The highest dose estimates for both animals (0.028 mrad/d) and humans

ITER-FEAT operation

International Nuclear Information System (INIS)

Shimomura, Y.; Huget, M.; Mizoguchi, T.; Murakami, Y.; Polevoi, A.; Shimada, M.; Aymar, R.; Chuyanov, V.; Matsumoto, H.

2001-01-01

ITER is planned to be the first fusion experimental reactor in the world operating for research in physics and engineering. The first 10 years' operation will be devoted primarily to physics issues at low neutron fluence and the following 10 years' operation to engineering testing at higher fluence. ITER can accommodate various plasma configurations and plasma operation modes such as inductive high Q modes, long pulse hybrid modes, non-inductive steady-state modes, with large ranges of plasma current, density, beta and fusion power, and with various heating and current drive methods. This flexibility will provide an advantage for coping with uncertainties in the physics database, in studying burning plasmas, in introducing advanced features and in optimizing the plasma performance for the different programme objectives. Remote sites will be able to participate in the ITER experiment. This concept will provide an advantage not only in operating ITER for 24 hours per day but also in involving the world-wide fusion communities and in promoting scientific competition among the Parties. (author)

ITER-FEAT operation

International Nuclear Information System (INIS)

Shimomura, Y.; Huguet, M.; Mizoguchi, T.; Murakami, Y.; Polevoi, A.R.; Shimada, M.; Aymar, R.; Chuyanov, V.A.; Matsumoto, H.

2001-01-01

ITER is planned to be the first fusion experimental reactor in the world operating for research in physics and engineering. The first ten years of operation will be devoted primarily to physics issues at low neutron fluence and the following ten years of operation to engineering testing at higher fluence. ITER can accommodate various plasma configurations and plasma operation modes, such as inductive high Q modes, long pulse hybrid modes and non-inductive steady state modes, with large ranges of plasma current, density, beta and fusion power, and with various heating and current drive methods. This flexibility will provide an advantage for coping with uncertainties in the physics database, in studying burning plasmas, in introducing advanced features and in optimizing the plasma performance for the different programme objectives. Remote sites will be able to participate in the ITER experiment. This concept will provide an advantage not only in operating ITER for 24 hours a day but also in involving the worldwide fusion community and in promoting scientific competition among the ITER Parties. (author)

Coeficientes de proporcionalidade nas valvas atrioventriculares: estudo anatômico dos segmentos valvares em indivíduos normais Coefficients of proportions of the atrioventricular valves: an anatomical study of valvar segments of normal individuals

Directory of Open Access Journals (Sweden)

Natália Martins Magacho de Andrade

2005-09-01

Full Text Available OBJETIVO: Descrever as relações anatômicas existentes entre as estruturas das valvas cardíacas, levando em consideração os segmentos dos anéis fibrosos e o volume ventricular esquerdo. MÉTODO: Analisaram-se fotografias digitais de 41 corações oriundos de necropsias feitas pelo Núcleo de Perícias Médico Legais. As fotos foram processadas em software em ambiente MATLAB®, que forneceu as medidas de perímetro e área valvares e o volume ventricular esquerdo. RESULTADOS: A média de idade dos indivíduos necropsiados foi de 33 anos, com 17 anos de desvio-padrão. Testaram-se diversas correlações envolvendo as valvas tricúspide e mitral, sendo encontradas correlações fortemente significativas entre a distância intercomissural (DIt e o perímetro do anel anterior (PA na valva tricúspide (r = 0,72 com pABSTRACT OBJECTIVE: To describe the anatomical relationships that exist between the heart valve structures taking into account the segments of the fibrous annuli and the left ventricular volume METHOD: Digital photographs of 41 hearts from autopsies performed by a coroner's office were analyzed. The photographs were processed using MATLAB® software, which supplies measurements of the valvar perimeter and area and the left ventricular volume. RESULTS: The average age of the corpses studied was 33 years old (standard deviation ± 17 years. Several ratios involving the tricuspid and mitral valves were tested, with strongly significant correlations found between the inter-commissural distance (ItD and the perimeter of the anterior annulus (PA of the tricuspid valve (r = 0.72; p-value < 0.05 and between the inter-commissural distance (ImD and the perimeter of the posterior annulus (PP of the mitral valve (r = 0.63; p-value < 0.05. The proportions between these parameters were PA/ItD = 1.36 ± 0.24 and PP/ImD = 1.38 ± 0.16. CONCLUSION: The proportions between the perimeter of the anterior annulus (tricuspid and the perimeter of the

Sexual dimorphism of the human corpus callosum: Digital morphometric study

Directory of Open Access Journals (Sweden)

Spasojević Goran

2006-01-01

Full Text Available Background/Aim. Changes in the morphology and the size of the corpus callosum, are related to various pathological conditions. An analysis of these changes requires data about sexual dimorphism of the corpus callosum, which we tried to obtain in our study. We also investigated the method of digital morphometry and compared the obtained results with the results of other authors obtained by magnetic resonance imaging or by planimetry. Methods. A morphological research included 34 human brains (cadavers of both sexes − 19 female and 15 male aged 26−72 years. By digital morphometry using an AutoCAD software we performed measurements in the corpus callosum: the length (L, width in the half of its length (WW’, length of its cortical margin (LCM, area and perimeter of the anterior and posterior callosal segments, as well as the area and perimeter of the corpus callosum section area. The investigated parameters were analyzed and compared between the females and males. Results. There was not a statistically significant difference between the males and females in the investigated parameters of the corpus callosum (t test; p > 0.05, including the mean values of the two most important parameters, the surface of its midsagittal section area (males 654.11 mm2; females 677.40 mm2 and of its perimeter (males 19.61 cm; females 19.72 cm. The results obtained by digital morphometry were in the range of the results of other authors obtained by magnetic resonance and by planimetry. However, the value of Pearson coefficient of linear correlation between the section surface area and perimeter of the corpus callosum in the males was highly significant (rxy = 0.6943, p < 0.01, while in the females this value was statistically insignificant. Conclusion. Digital morphometry is accurate method in encephalometric investigations. Our results suggest that the problem of sexual dimorphism of the corpus callosum is very complex, because the identical variables (section

Operating principle of Soft Open Points for electrical distribution network operation

International Nuclear Information System (INIS)

Cao, Wanyu; Wu, Jianzhong; Jenkins, Nick; Wang, Chengshan; Green, Timothy

2016-01-01

Highlights: • Two control modes were developed for a B2B VSCs based SOP. • The SOP operating principle was investigated under various network conditions. • The performance of the SOP using two control modes was analyzed. - Abstract: Soft Open Points (SOPs) are power electronic devices installed in place of normally-open points in electrical power distribution networks. They are able to provide active power flow control, reactive power compensation and voltage regulation under normal network operating conditions, as well as fast fault isolation and supply restoration under abnormal conditions. Two control modes were developed for the operation of an SOP, using back-to-back voltage-source converters (VSCs). A power flow control mode with current control provides independent control of real and reactive power. A supply restoration mode with a voltage controller enables power supply to isolated loads due to network faults. The operating principle of the back-to-back VSCs based SOP was investigated under both normal and abnormal network operating conditions. Studies on a two-feeder medium-voltage distribution network showed the performance of the SOP under different network-operating conditions: normal, during a fault and post-fault supply restoration. During the change of network operating conditions, a mode switch method based on the phase locked loop controller was used to achieve the transitions between the two control modes. Hard transitions by a direct mode switching were noticed unfavourable, but seamless transitions were obtained by deploying a soft cold load pickup and voltage synchronization process.

PROPOSAL HOW TO RECONSTRUCT THE ROŠKA MULTI-STOREY

Directory of Open Access Journals (Sweden)

Blaž Vogelnik

2013-01-01

Full Text Available We have known for years that the residential towers on Roška Street are absolutely the most problematic buildings in Ljubljana in terms of their seismic safety. We decided to propose the rehabilitation of these structures in line with a "new philosophy" according to which the building interiors are left unaffected, and all the necessary reinforcements are implemented externally. During rehabilitation works, the building is not deprived of its habitational function. We developed the "nothing within – all without" philosophy back in 1981 for the rehabilitation of a big hotel near Makarska (we also took out a patent for it then. It is also essential to note that, apart from adequate seismic reinforcement, we gain new residential floor areas which generally cover all rehabilitation costs. In the case of the residential towers on Roška Street, we envisaged additional reinforced concrete walls for the entire perimeter of the towers. These walls are "stabilised" with a 3 m wide console slab running all around each floor, thus adding approximately 65 sqm of additional floor area to every apartment, which amounts to a little more than the net apartment floor area. Before setting up the new additional perimeter walls, we place 15 cm of insulation in between which considerably reduces the use of heating energy and eliminates all "thermal bridges". The old perimeter walls are connected to the new ones by Ø 22 mm inox steel treenails (with weak thermal conductivity. Since the existing structures are no longer settling, all of the new perimeter walls will be founded on Jet-Grouted columns.

The Small Aircraft Transportation System (SATS), Higher Volume Operations (HVO) Off-Nominal Operations

Science.gov (United States)

Baxley, B.; Williams, D.; Consiglio, M.; Conway, S.; Adams, C.; Abbott, T.

2005-01-01

The ability to conduct concurrent, multiple aircraft operations in poor weather, at virtually any airport, offers an important opportunity for a significant increase in the rate of flight operations, a major improvement in passenger convenience, and the potential to foster growth of charter operations at small airports. The Small Aircraft Transportation System, (SATS) Higher Volume Operations (HVO) concept is designed to increase traffic flow at any of the 3400 nonradar, non-towered airports in the United States where operations are currently restricted to one-in/one-out procedural separation during Instrument Meteorological Conditions (IMC). The concept's key feature is pilots maintain their own separation from other aircraft using procedures, aircraft flight data sent via air-to-air datalink, cockpit displays, and on-board software. This is done within the Self-Controlled Area (SCA), an area of flight operations established during poor visibility or low ceilings around an airport without Air Traffic Control (ATC) services. The research described in this paper expands the HVO concept to include most off-nominal situations that could be expected to occur in a future SATS environment. The situations were categorized into routine off-nominal operations, procedural deviations, equipment malfunctions, and aircraft emergencies. The combination of normal and off-nominal HVO procedures provides evidence for an operational concept that is safe, requires little ground infrastructure, and enables concurrent flight operations in poor weather.

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Surgeon Specific Registry Trauma Education Trauma Education Trauma Education Advanced Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and Emergency ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Education Trauma Education Achieving Zero Preventable Deaths Trauma Systems Conference Advanced Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

Major Naval Operations

Science.gov (United States)

2008-09-01

operation were to take Turkey out of the war, open a direct link with the Entente’s embattled ally in Russia, force the Germans to shift troops from the...ing craft, while four combat craft (two tor- pedo craft and two light patrol craft) were captured in Port of Adabia. 5. Hartmut Zehrer, ed., Der...mission as a whole is accomplished. At the operational level, the intent is an expression of the commander’s operational vision. It provides a link

Some Normal Intuitionistic Fuzzy Heronian Mean Operators Using Hamacher Operation and Their Application

Directory of Open Access Journals (Sweden)

Guofang Zhang

2018-06-01

Full Text Available Hamacher operation is a generalization of the algebraic and Einstein operation and expresses a family of binary operation in the unit interval [0,1]. Heronian mean can deal with correlations of different criteria or input arguments and does not bring out repeated calculation. The normal intuitionistic fuzzy numbers (NIFNs can depict normal distribution information in practical decision making. A decision-making problem was researched under the NIFN environment in this study, and a new multi-criteria group decision-making (MCGDM approach is herein introduced on the basis of Hamacher operation. Firstly, according to Hamacher operation, some operational laws of NIFNs are presented. Secondly, it is noted that Heronian mean not only takes into account mutuality between the attribute values once, but also considers the correlation between input argument and itself. Therefore, in order to aggregate NIFN information, we developed some operators and studied their properties. These operators include Hamacher Heronian mean (NIFHHM, Hamacher weighted Heronian mean (NIFHWHM, Hamacher geometric Heronian mean (NIFHGHM, and Hamacher weighted geometric Heronian mean (NIFHWGHM. Furthermore, we applied the proposed operators to the MCGDM problem and developed a new MCGDM approach. The characteristics of this new approach are that: (1 it is suitable for making a decision under the NIFN environment and it is more reasonable for aggregating the normal distribution data; (2 it utilizes Hamacher operation to provide an effective and powerful MCGDM algorithm and to make more reliable and more flexible decisions under the NIFN circumstance; (3 it uses the Heronian mean operator to deal with interrelations between the attributes or input arguments, and it does not bring about repeated calculation. Therefore, the proposed method can describe the interaction of the different criteria or input arguments and offer some reasonable and reliable MCGDM aggregation operators

Combined in-situ and ex-situ bioremediation of petroleum hydrocarbon contaminated soils by closed-loop soil vapor extraction and air injection

International Nuclear Information System (INIS)

Hu, S.S.; Buckler, M.J.

1993-01-01

Treatment and restoration of petroleum hydrocarbon contaminated soils at a bulk petroleum above-ground storage tank (AST) site in Michigan is being conducted through in-situ and ex-situ closed-loop soil vapor extraction (SVE), soil vapor treatment, and treated air injection (AI) processes. The soil vapor extraction process applies a vacuum through the petroleum hydrocarbon affected soils in the ex-situ bio-remediation pile (bio-pile) and along the perimeter of excavated area (in-situ area) to remove the volatile or light petroleum hydrocarbons. This process also draws ambient air into the ex-situ bio-pile and in-situ vadose zone soil along the perimeter of excavated area to enhance biodegradation of light and heavy petroleum hydrocarbons in the soil. The extracted soil vapor is treated using a custom-designed air bio-remediation filter (bio-filter) to degrade the petroleum hydrocarbon compounds in the soil vapor extraction air streams. The treated air is then injected into a flush grade soil bed in the backfill area to perform final polishing of the air stream, and to form a closed-loop air flow with the soil vapor extraction perforated pipes along the perimeter of the excavated area

Fractal dimension analysis of malignant and benign endobronchial ultrasound nodes

International Nuclear Information System (INIS)

Fiz, José Antonio; Monte-Moreno, Enrique; Andreo, Felipe; Auteri, Santiago José; Sanz-Santos, José; Serra, Pere; Bonet, Gloria; Castellà, Eva; Manzano, Juan Ruiz

2014-01-01

Endobronchial ultrasonography (EBUS) has been applied as a routine procedure for the diagnostic of hiliar and mediastinal nodes. The authors assessed the relationship between the echographic appearance of mediastinal nodes, based on endobronchial ultrasound images, and the likelihood of malignancy. The images of twelve malignant and eleven benign nodes were evaluated. A previous processing method was applied to improve the quality of the images and to enhance the details. Texture and morphology parameters analyzed were: the image texture of the echographies and a fractal dimension that expressed the relationship between area and perimeter of the structures that appear in the image, and characterizes the convoluted inner structure of the hiliar and mediastinal nodes. Processed images showed that relationship between log perimeter and log area of hilar nodes was lineal (i.e. perimeter vs. area follow a power law). Fractal dimension was lower in the malignant nodes compared with non-malignant nodes (1.47(0.09), 1.53(0.10) mean(SD), Mann–Whitney U test p < 0.05)). Fractal dimension of ultrasonographic images of mediastinal nodes obtained through endobronchial ultrasound differ in malignant nodes from non-malignant. This parameter could differentiate malignat and non-malignat mediastinic and hiliar nodes

Equilibrium states and ground state of two-dimensional fluid foams

International Nuclear Information System (INIS)

Graner, F.; Jiang, Y.; Janiaud, E.; Flament, C.

2001-01-01

We study the equilibrium energies of two-dimensional (2D) noncoarsening fluid foams, which consist of bubbles with fixed areas. The equilibrium states correspond to local minima of the total perimeter. We present a theoretical derivation of energy minima; experiments with ferrofluid foams, which can be either highly distorted, locally relaxed, or globally annealed; and Monte Carlo simulations using the extended large-Q Potts model. For a dry foam with small size variance we develop physical insight and an electrostatic analogy, which enables us to (i) find an approximate value of the global minimum perimeter, accounting for (small) area disorder, the topological distribution, and physical boundary conditions; (ii) conjecture the corresponding pattern and topology: small bubbles sort inward and large bubbles sort outward, topological charges of the same signs ''repel'' while charges of the opposite signs ''attract;'' (iii) define local and global markers to determine directly from an image how far a foam is from its ground state; (iv) conjecture that, in a local perimeter minimum at prescribed topology, the pressure distribution and thus the edge curvature are unique. Some results also apply to 3D foams

Effect of interference of capillary length on evaporation at meniscus

Science.gov (United States)

Soma, Shu; Kunugi, Tomoaki; Yokomine, Takehiko; Kawara, Zensaku

2017-11-01

In this study, the experimental results on the evaporation characteristics of meniscus in various geometrical configurations which enable to vary a perimeter of liquid-vapor interface and a meniscus curvature were obtained, and the main factor in evaporation process was clarified. As the experimental conditions, the perimeter was adjusted from 1mm to 100mm order, and the curvature from the inverse of capillary length, κ( 0.4mm-1) , to about 10mm-1 . Measuring devices for evaporation rate, which consisted of a test section on an electric balance, was set to a reduced pressure environment for making the purified water in the test section evaporate. There is no heater in the test section and system was set to be isolated from outside environment. It was found that the evaporation rate and flux could be organized by the perimeter if the curvature is constant at κ. On the other hand, when the curvature is larger than κ, it was found that the curvature is the dominant factor in the evaporation process. It can be considered that an interference of capillary length is a key to understand these results.

Operator licensing examiner standards

International Nuclear Information System (INIS)

1993-01-01

The Operator Licensing Examiner Standards provide policy and guidance to NRC examiners and establish the procedures and practices for examining licensees and applicants for reactor operator and senior reactor operator licenses at power reactor facilities pursuant to Part 55 of Title 10 of the Code of Federal Regulations (10 CFR 55). The Examiner Standards are intended to assist NRC examiners and facility licensees to better understand the initial and requalification examination processes and to ensure the equitable and consistent administration of examinations to all applicants. These standards are not a substitute for the operator licensing regulations and are subject to revision or other internal operator licensing policy changes

Operating results and experience and operating regimes in changing demands of energy world

International Nuclear Information System (INIS)

Hobza, L.

2004-01-01

In this paper, there are stated some operating results and experience obtained from trial operation of Temelin NPP. In Europe, Temelin NPP is presently one of the latest implemented projects of the series of VVER 1000 nuclear units with proven V-320 pressurized water reactor. The distinction between Temelin NPP and original project lays mainly in supply of nuclear fuel and in I and C systems delivered by Westinghouse Company. Temelin NPP has passed through commissioning period and trial operation. The main goal of the trial operation was to meet the requirements of section 2, par. 4, point b) of Decree No. 106/98 Sb. and verification of project parameters and stability of operation, and the situation leading to violation of safety functions fulfilment according to Pre-operational Safety Report should not occur. The integral part of trial operation assessment was also successful performing of determined monitoring programmes, first refuelling and performing of prescribed tests and operational inspections. Simultaneously, first experience was obtained with nuclear fuel; providing of ancillary services; reliability of important components; operation of turbine-generator 1000 MW; chemical regime; influence to environment; and quality of contractors. As safety is the most important indicator, it can be stated that: no facts which would lead to decreasing of safety systems operability have been detected; no facts which would lead to negative affecting of barriers against fading the radioactivity into both working areas and environment, have been detected; good condition of fire safety has been continuously documented; requirements of limits for releasing waste water into environment have been continuously complied with; requirements of limits for releasing radioactive substances (in gaseous and/or liquid state) into environment have been continuously complied with. From the operation regimes point of view is clear, that it would be suitable for the power plant if the

Licensed operating reactors

International Nuclear Information System (INIS)

Hartfield, R.A.

1994-03-01

The Nuclear Regulatory Commissions annual summary of licensed nuclear power reactor data is based primarily on the report of operating data submitted by licensees for each unit for the month of December, the year to date (in this case calendar year 1993) and cumulative data, usually for the date of commercial operation. The data is not independently verified, but various computer checks are made. The report is divided into two sections. The first contains summary highlights and the second contains data on each individual unit in commercial operation. Section 1 capacity and availability factors are simple arithmetic averages. Section 2 items in the cumulative column are generally as reported by the licensee and notes as to the use of weighted averages and starting dates other than commercial operation are provided

Operational characteristics of nuclear power plants - modelling of operational safety

International Nuclear Information System (INIS)

Studovic, M.

1984-01-01

By operational experience of nuclear power plants and realize dlevel of availability of plant, systems and componenst reliabiliuty, operational safety and public protection, as a source on nature of distrurbances in power plant systems and lessons drawn by the TMI-2, in th epaper are discussed: examination of design safety for ultimate ensuring of safe operational conditions of the nuclear power plant; significance of the adequate action for keeping proess parameters in prescribed limits and reactor cooling rquirements; developed systems for measurements detection and monitoring all critical parameters in the nuclear steam supply system; contents of theoretical investigation and mathematical modeling of the physical phenomena and process in nuclear power plant system and components as software, supporting for ensuring of operational safety and new access in staff education process; program and progress of the investigation of some physical phenomena and mathematical modeling of nuclear plant transients, prepared at faculty of mechanical Engineering in Belgrade. (author)

Design of operator interfaces for ''bumpless'' transfers between operator behaviors

International Nuclear Information System (INIS)

Lindsay, R.W.; Brown-VanHoozer, S.A.

1993-01-01

Advances in the science and art of man-machine interface design have taken major strides forward for interface design practitioners with the advent of the computer. one concern still extant, however, is the need for design of interfaces that minimize confusion when an operator is required to shift from the different levels of cognitive control of skill, rule, and knowledge-based behaviors, (e.g., if an operator is following a set of procedures and a procedural error is noted by the operator, the behavior may, of necessity, shift from rule-based to a knowledge-based behavior). Shifting of the cognitive control levels requires that the information to be displayed to the operator should be designed so that a ''bumpless'' transfer can be made between the behavioral modes, thus reducing the possibility of error. This paper introduces a way to design human interfaces so that skill, rule, and knowledge-based behaviors are supported and provides for the necessary interchanges between behavioral types

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... to Choosing a Surgical Residency Education Modules Practice Management Workshops Patients and Family Patient Education Patient Education ... Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... 25- and 50-Year Fellows Recognition Surgical History Group Icons in Surgery Archives Catalog Additional Resources Contact ... for after the operation including review of attached equipment and ways for you to actively participate to ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Congress Educational Program Events and Special Activities Resources Housing and Travel Exhibitors Media Information Clinical Congress 2017 ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Disaster Management and Emergency Preparedness Rural Trauma Team Development Course Trauma Evaluation and Management Trauma CME The ... for after the operation including review of attached equipment and ways for you to actively participate to ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Online Guide to Choosing a Surgical Residency Practice Management Workshops Patients and Family Patient Education Patient Education ... Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for Trauma Disaster Management and ...

A minicomputer interface for realtime operations: an application to operant conditioning.

Science.gov (United States)

Mayor, S J; Wilson, J

1975-09-01

A PDP-12 interface was designed, constructed, and tested for realtime imput and output of binary information. Within limits this interface can be used with any peripheral device which operates in the binary mode. In addition to its generality of application the interface features include ease of expansion and low cost. A description of its design and operation is give here is terms of a typical application: the control of behavioral equipment (i.e. "Skinner Boxes") for operant conditioning.

Operation and Maintenance Plan for the 300-FF-5 Operable Unit

International Nuclear Information System (INIS)

Singleton, K.M.

1996-09-01

This document is the operation and maintenance plan for the 300-FF-5 groundwater operable unit. The purpose of this plan is to identify tasks necessary to verify the effectiveness of the selected alternative. This plan also describes the monitoring program and administrative tasks that will be used as the preferred alternative for the remediation of groundwater in the 300-FF-5 Operable Unit. The preferred alternative selected for remediation of groundwater consists of institutional controls

X-ray streak camera for observation of tightly pinched relativistic electron beams

International Nuclear Information System (INIS)

Johnson, D.J.

1977-01-01

A pinhole camera is coupled with a Pilot-B scintillator and image-intensified TRW streak camera to study pinched electron beam profiles via observation of anode target bremsstrahlung. Streak intensification is achieved with an EMI image intensifier operated at a gain of up to 10 6 which allows optimizing the pinhole configuration so that resolution is simultaneously limited by photon-counting statistics and pinhole geometry. The pinhole used is one-dimensional and is fabricated by inserting uranium shims with hyperbolic curved edges between two 5-cm-thick lead blocks. The loss of spatial resolution due to the x-ray transmission through the perimeter of the pinhole is calculated and a streak photograph of a Gamble I pinched beam interacting with a brass anode is presented

Method for greenhouse gas emission assessments according to the article 75 of the 2010-788 law of July 12, 2010 bearing national commitment for the environment (ENE)

International Nuclear Information System (INIS)

2011-01-01

This document presents mandatory methodological principles, optional prescriptions and optional recommendations for the assessment of greenhouse gas emissions. After having recalled some basic definitions, and regulatory arrangements and performance principles for greenhouse gas emission assessment, this document proposes a diagram indicating the main steps of such an assessment. It defines the organisational frame (for companies or communities), presents the concept of operational perimeter. It reviews the general principles of the assessment: global approach and priorities, calculation with respect to measurement, emission factors, gas global warming potential, reporting and reference year, uncertainty management, case of electricity, case of biomass CO 2 , cogeneration and electricity production from renewable energy, compensation. It presents the reporting format. Some aspects are more precisely presented or described in appendix

Development of the cybernetic methods in the new generation of superhigh-energy accelerators

International Nuclear Information System (INIS)

Vasil'ev, A.A.; Berezhnoj, V.A.

1985-01-01

The problems related to the use of cybernetic methods in case of the development of control systems for superhigh-energy accelerators, particularly for parameters control which determine betatron particle oscillations are discussed. It is pointed out that early in 1960-s the development of the 1 TeV cybernetic accelerating complex consisting of a linear accelerator - injector, booster and main accelerator has been started. The conclusion is drawn that with the increase of accelerator energy, increase of ring magnet perimeter and decrease of vacuum chaber aperture as well as owing to comlication of accelerating complexes complication of operational modes and increase of particle beams intensity the use of cybernetic methods and completely automated control systems created on their base becomes in future still more pressing

Heat kernel expansion for fermionic billiards in an external magnetic field

International Nuclear Information System (INIS)

Antoine, M.; Comtet, A.; Knecht, M.

1989-05-01

Using Seeley's heat kernel expansion, we compute the asymptotic density of states of the Dirac operator coupled to a magnetic field on a two dimensional manifold with boundary (fermionic billiard). Local boundary conditions compatible with vector current conservation depend on a free parameter α. It is shown that the perimeter correction identically vanishes for α = 0. In that case, the next order constant term is found to be proportional to the Euler characteristic of the manifold. These results are independent of the external magnetic field and of the shape of the billiard, provided the boundary is sufficiently smooth. For the flat circular billiard, the constant term is found to be - 1/12, in agreement with a numerical result by M.V. BERRY and R.J. MONDRAGON (1987)

Factorizing the time evolution operator

International Nuclear Information System (INIS)

Garcia Quijas, P C; Arevalo Aguilar, L M

2007-01-01

There is a widespread belief in the quantum physical community, and textbooks used to teach quantum mechanics, that it is a difficult task to apply the time evolution operator e itH-hat/h on an initial wavefunction. Because the Hamiltonian operator is, generally, the sum of two operators, then it is not possible to apply the time evolution operator on an initial wavefunction ψ(x, 0), for it implies using terms like (a-hat + b-hat). A possible solution is to factorize the time evolution operator and then apply successively the individual exponential operator on the initial wavefunction. However, the exponential operator does not directly factorize, i.e. e a-hat+b-hat ≠ e a-hat e b-hat . In this study we present a useful procedure for factorizing the time evolution operator when the argument of the exponential is a sum of two operators, which obey specific commutation relations. Then, we apply the exponential operator as an evolution operator for the case of elementary unidimensional potentials, like a particle subject to a constant force and a harmonic oscillator. Also, we discuss an apparent paradox concerning the time evolution operator and non-spreading wave packets addressed previously in the literature

Revising the security organisation at Forsmark NPP - A case study from the point of view of the operator and the regulatory and supervisory authority

International Nuclear Information System (INIS)

Roeden, B.; Strandberg, L.; Isaksson, S.

2001-01-01

deviated after a couple of years. The security organisation has improved in performance regarding handling of technical malfunctions. There is a Supervisor for Security on duty 24 hours per day. The standard of the written operational procedures for use of the Security Organisation has improved significantly. Both SKI and the FKA Power Company identified problems with the implementation of the new organisation. This led to measures aiming at solving the problems some of which were successful and others that were not. Inspection of the security at Forsmark NPP At the end of 1999 it was clear to SKI that a major inspection had to be carried out in order to evaluate the function of the security at Forsmark NPP. The inspection was to focus on the physical protection of Forsmark NPP with a specific focus on the abilities of the security guards to act in accordance with the SKI regulations. Result of inspection and decisions taken by SKI The inspection in January 2000 resulted in severe criticism of the physical protection at Forsmark NPP in the following two areas: Protection of the perimeter, both technical shortcomings and the ability of the security guards to act promptly; Attitudes of Security Guards, Shift supervisors and operating personnel. This included also lack of repetitive training and exercises for involved personnel SKI decided in May 2000 that the FKA Power Company, as a condition for continued operation of the Forsmark NPP after the 30 June 2001, should take corrective actions in addition to immediate compensatory measures to ensure that the physical protection would be in compliance with national regulations. Dialog between FKA Power company and SKI Immediate actions and an ambitious and extensive plan of measures to improve the physical protection at Forsmark NPP followed the decision by SKI. Furthermore FKA Power Company has submitted a number of reports to SKI on the progress of the implementation of the measures to improve the physical protection. In

An independent system operator's perspective on operational ramp forecasting

Energy Technology Data Exchange (ETDEWEB)

Porter, G. [New Brunswick System Operator, Fredericton, NB (Canada)

2010-07-01

One of the principal roles of the power system operator is to select the most economical resources to reliably supply electric system power needs. Operational wind power production forecasts are required by system operators in order to understand the impact of ramp event forecasting on dispatch functions. A centralized dispatch approach can contribute to a more efficient use of resources that traditional economic dispatch methods. Wind ramping events can have a significant impact on system reliability. Power systems can have constrained or robust transmission systems, and may also be islanded or have large connections to neighbouring systems. Power resources can include both flexible and inflexible generation resources. Wind integration tools must be used by system operators to improve communications and connections with wind power plants. Improved wind forecasting techniques are also needed. Sensitivity to forecast errors is dependent on current system conditions. System operators require basic production forecasts, probabilistic forecasts, and event forecasts. Forecasting errors were presented as well as charts outlining the implications of various forecasts. tabs., figs.

14th Biennial conference on reactor operating experience plant operations: The human element

International Nuclear Information System (INIS)

Anon.

1989-01-01

Separate abstracts were prepared for the papers presented in the following areas of interest: enhancing operator performance; structured approaches to maintenance standards and reliability-centered maintenance; human issues in plant operations and management; test, research, and training reactor utilization; methods and applications of root-cause analysis; emergency operating procedure enhancement programs; test, research, and training reactor upgrades; valve maintenance and diagnostics; recent operating experiences; and current maintenance issues

Vessel Operator System

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Operator cards are required for any operator of a charter/party boat and or a commercial vessel (including carrier and processor vessels) issued a vessel permit from...

Core shroud corner joints

Science.gov (United States)

Gilmore, Charles B.; Forsyth, David R.

2013-09-10

A core shroud is provided, which includes a number of planar members, a number of unitary corners, and a number of subassemblies each comprising a combination of the planar members and the unitary corners. Each unitary corner comprises a unitary extrusion including a first planar portion and a second planar portion disposed perpendicularly with respect to the first planar portion. At least one of the subassemblies comprises a plurality of the unitary corners disposed side-by-side in an alternating opposing relationship. A plurality of the subassemblies can be combined to form a quarter perimeter segment of the core shroud. Four quarter perimeter segments join together to form the core shroud.

IMPACT OF SMOKING HABITS ON THE STATE OF CHROMATIN AND MORPHOLOGY OF BUCCAL EPITHELIAL CELLS AMONG MEDICAL STUDENTS.

Science.gov (United States)

Volkova, O; Ryabokon, E; Magda, I; Shckorbatov, Y

2017-01-01

The cells of buccal epithelium were investigated in groups of smoking and non-smoking students. Cell samples were collected by scraping with blunt sterile spatula, stained with orcein and photographed. The smoking of cigarettes and hookah induces significant decrease in nuclear and cell perimeter and cell area in cells of buccal epithelium. Smoking of hookah induces, besides, the heterochromatization in cell nuclei and the decrease of nuclear area. The data obtained indicate stress reaction in cells (heterochromatinization) and apoptosis-related changes in cells (decrease of nuclear and cell perimeter and cell area). These data show unfavorable effects of smoking cigarettes and even more harmful effect of hookah smoking.

Operator spin foam models

International Nuclear Information System (INIS)

Bahr, Benjamin; Hellmann, Frank; Kaminski, Wojciech; Kisielowski, Marcin; Lewandowski, Jerzy

2011-01-01

The goal of this paper is to introduce a systematic approach to spin foams. We define operator spin foams, that is foams labelled by group representations and operators, as our main tool. A set of moves we define in the set of the operator spin foams (among other operations) allows us to split the faces and the edges of the foams. We assign to each operator spin foam a contracted operator, by using the contractions at the vertices and suitably adjusted face amplitudes. The emergence of the face amplitudes is the consequence of assuming the invariance of the contracted operator with respect to the moves. Next, we define spin foam models and consider the class of models assumed to be symmetric with respect to the moves we have introduced, and assuming their partition functions (state sums) are defined by the contracted operators. Briefly speaking, those operator spin foam models are invariant with respect to the cellular decomposition, and are sensitive only to the topology and colouring of the foam. Imposing an extra symmetry leads to a family we call natural operator spin foam models. This symmetry, combined with assumed invariance with respect to the edge splitting move, determines a complete characterization of a general natural model. It can be obtained by applying arbitrary (quantum) constraints on an arbitrary BF spin foam model. In particular, imposing suitable constraints on a spin(4) BF spin foam model is exactly the way we tend to view 4D quantum gravity, starting with the BC model and continuing with the Engle-Pereira-Rovelli-Livine (EPRL) or Freidel-Krasnov (FK) models. That makes our framework directly applicable to those models. Specifically, our operator spin foam framework can be translated into the language of spin foams and partition functions. Among our natural spin foam models there are the BF spin foam model, the BC model, and a model corresponding to the EPRL intertwiners. Our operator spin foam framework can also be used for more general spin

Tevatron operational experiences

International Nuclear Information System (INIS)

Norris, B.L.; Theilacker, J.C.

1989-02-01

Fermilabs superconducting accelerator, the Tevatron has been operational for nearly six years. The history of its operation is presented. Several long shutdowns for superconducting dipole repairs are discussed. The dominant factor influencing the repair was conductor motion which fatigued the cable in the magnet ends. Borescoping and x-raying techniques were used to determine which magnet ends required repair. Detailed downtime logs were kept for each of the running periods. A discussion of the sources of downtime and a comparison for different operating modes is presented

Environmental Assessment to Repair/Modify Drainage and Remove Headwalls on Runway 17/35 and Taxiway D

Science.gov (United States)

2013-02-01

34 """· ll1d unclog ~oe dJlo:t-.e. b> cc>r!ttlinJ! £llldimb 10 pruori<k prapo:r no... The proj«l tnl) be dune in (<>Ur """"" or all at once dcpcndw,: M 1111...dad-......, yea-..__ ...... ~""’~*~""" · ....tums" ncfwtna clownward. and die ..,_ lo obo1r-.,..-"""’ • .,......,. slmilu 10 the canpaco Then "" u-.,...,. four toes on eodl !rind i>oc.. C-7

Cask fleet operations study

International Nuclear Information System (INIS)

1988-01-01

The Nuclear Waste Policy Act of 1982 assigned to the Department of Energy's (DOE) Office of Civilian Waste Management the responsibility for disposing of high-level waste and spent fuel. A significant part of that responsibility involves transporting nuclear waste materials within the federal waste management system; that is, from the waste generator to the repository. The lead responsibility for transportation operations has been assigned to Oak Ridge Operations, with Oak Ridge National Laboratory (ORNL) providing technical support through the Transportation Operations Support Task Group. One of the ORNL support activities involves assessing what facilities, equipment and services are required to assure that an acceptable, cost-effective and safe transportation operations system can be designed, operated and maintained. This study reviews, surveys and assesses the experience of Nuclear Assurance Corporation (NAC) in operating a fleet of spent-fuel shipping casks to aid in developing the spent-fuel transportation system

Integrated formal operations plan

Energy Technology Data Exchange (ETDEWEB)

Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

1994-01-05

The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

On commuting operator exponentials, II

Indian Academy of Sciences (India)

where N is an unbounded normal operator and M is a bounded normal operator in the. Hilbert space. Keywords. Self-adjoint and normal operator; commuting normal operator exponent- ials; Borel functional calculus. 1. Introduction. Let E be a complex Hilbert space and let B(E) be the algebra of bounded linear operators.

Boiler operator's handbook

CERN Document Server

Heselton, Ken

2004-01-01

Containing key information for operators and managers of large and small plants, this is an indispensable guide for those at advanced and early stages of their careers, as well as for managers interested in reducing operating expenses.

Systemic Operational Design: Bringing Efficacy to the Operational Level of War

National Research Council Canada - National Science Library

Bernard, Barrett M

2007-01-01

The premise of this monograph is that the Elements of Operational Design are incapable of linking the tactical employment of forces to strategic objectives and that Systemic Operational Design is a viable alternative...

Remote operations and interactions for systems of arbitrary-dimensional Hilbert space: State-operator approach

International Nuclear Information System (INIS)

Reznik, Benni; Groisman, Berry; Aharonov, Yakir

2002-01-01

We present a systematic simple method for constructing deterministic remote operations on single and multiple systems of arbitrary discrete dimensionality. These operations include remote rotations, remote interactions, and measurements. The resources needed for an operation on a two-level system are one ebit and a bidirectional communication of two cbits, and for an n-level system, a pair of entangled n-level particles and two classical 'nits'. In the latter case, there are n-1 possible distinct operations per n-level entangled pair. Similar results apply for generating interaction between a pair of remote systems, while for remote measurements only one-directional classical communication is needed. We further consider remote operations on N spatially distributed systems, and show that the number of possible distinct operations increases here exponentially, with the available number of entangled pairs that are initially distributed between the systems. Our results follow from the properties of a hybrid state-operator object (stator), which describes quantum correlations between states and operations

Non-operative diagnosis - effect on repeat-operation rates in the UK breast screening programme

International Nuclear Information System (INIS)

Wallis, M.G.; Cheung, S.; Kearins, O.; Lawrence, G.M.

2009-01-01

Non-operative diagnosis rates in the UK breast screening programme have improved dramatically from 48.8% in 1994/95 (only nine units achieved the then minimum standard of 70%) to 94% in 2005/06 (only seven units failed to achieve the target of 90%). Preoperative and operative history of all 120,550 women diagnosed with screen-detected breast cancer in the UK between April 1994 and March 2006 was derived from different national databases. In 2005/06, 2,790 (17.8%) of the 15,688 women having surgery needed two or more operations. In 2001/02 (non-operative diagnosis rate 87%), the re-operation rate was 23.8% (2,377 of 9,969). Extrapolation backwards to 1994/95 (non-operative diagnosis rate 48.8%) suggests a re-operation rate of 62%. Analysis over the 4 years from April 2002 (n=34,198) demonstrates that 4,089 (12%) women with a correct non-operative diagnosis of invasive disease required additional surgery compared to 1,166 (48%) of women who were under-staged (diagnosed as non-invasive based on core biopsy, but actually suffering from invasive disease). Failure to achieve a non-operative diagnosis of invasive disease (n=1,542) or non-invasive disease (n=2,247) resulted in re-operation rates of 65 and 43% respectively. Given the impact of not having a diagnosis pre-operatively, or of under-staging invasive carcinoma, it seems timely to introduce more sophisticated standards. (orig.)

Transnational Research Co-operation: Opportunities and Challenges for transnational research co-operation

DEFF Research Database (Denmark)

of the NGOs have a lot of international experience (mainly in Denmark and Germany) as partners in different co-operation projects. Almost all the NGOs have recognized the important role of the scientific information in their activity. NGOs also feel the need for an easy access to required information...... for transnational co-operation like: an investigation/project concerning the driving forces behind urban development,or a co-operation in the field of wastewater reuse and minimization of wastewater loads and discharge, or a service page (internet) to search for potential partners. The governmental institutions...... in order to improve transnational cooperation are identified to be: • Search for national/international project partners • Access to existent co-operation projects or networks • Develop in common project proposals on themes requested by community groups • Exchange information/good operational practices...

Operational Intelligence and Operational Design: Thinking about Operational Art

Science.gov (United States)

2011-06-01

captured it best when he wrote, ―Operational intelligence is more or less the fusion of 45 Kent... Market Garden….‖34 Additionally, Drea concluded that the strong-minded General Douglas MacArthur‘s ―sense of destiny‖ shaped his strategic concepts...1960. Memorandum RM-4172-ISA, Santa Monica, CA: The RAND Corporation, September 1964. The Bible . New International Version. Hitchcock, Walter T., ed

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Stay Up to Date with ACS Association Management Jobs Events Find a Surgeon Patients and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

Your Lung Operation: After Your Operation

Medline Plus

Full Text Available ... Up to Date with ACS Association Management JACS Jobs Events Find a Surgeon Patients and Family Contact My Profile Shop ( 0 ) Cart Donate American College of Surgeons Education Patients and Family Skills Programs Your Lung Operation ...

Density operators in quantum mechanics

International Nuclear Information System (INIS)

Burzynski, A.

1979-01-01

A brief discussion and resume of density operator formalism in the way it occurs in modern physics (in quantum optics, quantum statistical physics, quantum theory of radiation) is presented. Particularly we emphasize the projection operator method, application of spectral theorems and superoperators formalism in operator Hilbert spaces (Hilbert-Schmidt type). The paper includes an appendix on direct sums and direct products of spaces and operators, and problems of reducibility for operator class by using the projection operators. (author)

Regulations for RA reactor operation

International Nuclear Information System (INIS)

1980-09-01

Regulations for RA reactor operation are written in accordance with the legal regulations defined by the Law about radiation protection and related legal acts, as well as technical standards according to the IAEA recommendations. The contents of this book include: fundamental data about the reactor; legal regulations for reactor operation; organizational scheme for reactor operation; general and detailed instructions for operation, behaviour in the reactor building, performing experiments; operating rules for operation under steady state and accidental conditions [sr