A multi-site study on medical school selection, performance, motivation and engagement

NARCIS (Netherlands)

Wouters, A.; Croiset, G.; Schripsema, N. R.; Cohen-Schotanus, J.; Spaai, G. W. G.; Hulsman, R. L.; Kusurkar, R. A.

Medical schools seek ways to improve their admissions strategies, since the available methods prove to be suboptimal for selecting the best and most motivated students. In this multi-site cross-sectional questionnaire study, we examined the value of (different) selection procedures compared to a

SELECTION OF TALENTS IN HANDBALL: ANTHROPOMETRIC AND PERFORMANCE ANALYSIS

Directory of Open Access Journals (Sweden)

Juan José Fernández-Romero

Full Text Available ABSTRACT Introduction: Anthropometric and physical performance parameters that determine competitive levels in handball need to be carefully studied to identify which of them can bring the optimal contribution when the talents for this sport are selected. Objective: To identify which anthropometric and physical performance variables evaluated in the basic categories (infantile, under-15 and cadet, under-17 have the greatest influence on professional levels attained by male and female handball players throughout their sports careers. Method: A total of 145 handball players (75 males and 70 females participated in the study. Participants were initially evaluated during the season 1998-99 and their performance levels were supervised until March 2013. The resulting data were classified according to the performance level (regional n = 109; national n = 36, gender, and category (infantile, cadet. Results: The MANCOVA analysis indicated that the player’s maturation stage is one of the main parameters to be accounted for when selecting the variables that should configure a talent detection model for handball, which is also conditioned by sex. Anthropometric variables are highly influential in the case of male players, while physical performance variables (squat jump, counter movement jump, counter movement jump with arm, 10x5m shuttle run, 20 m shuttle run, and VO2 max have a similar effect in males and females. Conclusion: The study of changes occurring in anthropometric and physical performance variables may yield useful information to detect talents in handball, and maturation is a key factor to choose the most appropriate variables.

Performance-Based Technology Selection Filter description report

International Nuclear Information System (INIS)

O'Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL)

Performance-Based Technology Selection Filter description report

Energy Technology Data Exchange (ETDEWEB)

O' Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

The effect of Prophylactic knee bracing on selected performance ...

African Journals Online (AJOL)

The objective of this study was to determine if the wearing of a prophylactic knee brace by uninjured rugby players affected the following performance based parameters: speed, agility, strength, proprioception and economy of running. Thirty rugby players were subjected to a selected number of carefully monitored ...

EFFECT OF RECRUITMENT, SELECTION AND MOTIVATION TO PERFORMANCE OF EMPLOYEES AT DATACOMM DIANGRAHA COMPANY

Directory of Open Access Journals (Sweden)

I Ketut R Sudiarditha

2017-05-01

Full Text Available In this study, the goal is to test empirically the effect of recruitment, selection and motivation of the employee performance at Datacomm Diangraha Company. The samples used were employees of Datacomm Diangraha especially the engineers with the total number of respondents was 126. The analysis used a linear regression, this research examines four variables: Recruitment (X1, Selection (X2 and Motivation (X3 as independent variables, and Performance employees (Y as the dependent variable. Partial test shows that the recruitment effect of 0175 (positive and significant on the performance. While the selection is also influenced significantly by 0347 on employee performance. And further motivation for 0295 was a significant influence on employee performance.Measurement model analysis in this study showed that all variables have met the criteria of validity and reliability, while at the structural model analysis shows that testing of hypotheses H1, H2, and H3 supports the hypothesis proposed. The resulting model of the independent variables and the effect on the dependent variable is Y = 16,408 + 0175 0347 X1 + X2 + X3 0295. The study concluded that the recruitment, selection and motivation affect the performance of employees with the results affect the performance of 95%, while 5% is determined by other variables.

Evaluation of operational, economic, and environmental performance of mixed and selective collection of municipal solid waste: Porto case study.

Science.gov (United States)

Teixeira, Carlos A; Russo, Mário; Matos, Cristina; Bentes, Isabel

2014-12-01

This article describes an accurate methodology for an operational, economic, and environmental assessment of municipal solid waste collection. The proposed methodological tool uses key performance indicators to evaluate independent operational and economic efficiency and performance of municipal solid waste collection practices. These key performance indicators are then used in life cycle inventories and life cycle impact assessment. Finally, the life cycle assessment environmental profiles provide the environmental assessment. We also report a successful application of this tool through a case study in the Portuguese city of Porto. Preliminary results demonstrate the applicability of the methodological tool to real cases. Some of the findings focus a significant difference between average mixed and selective collection effective distance (2.14 km t(-1); 16.12 km t(-1)), fuel consumption (3.96 L t(-1); 15.37 L t(-1)), crew productivity (0.98 t h(-1) worker(-1); 0.23 t h(-1) worker(-1)), cost (45.90 € t(-1); 241.20 € t(-1)), and global warming impact (19.95 kg CO2eq t(-1); 57.47 kg CO2eq t(-1)). Preliminary results consistently indicate: (a) higher global performance of mixed collection as compared with selective collection; (b) dependency of collection performance, even in urban areas, on the waste generation rate and density; (c) the decline of selective collection performances with decreasing source-separated material density and recycling collection rate; and (d) that the main threats to collection route efficiency are the extensive collection distances, high fuel consumption vehicles, and reduced crew productivity. © The Author(s) 2014.

Adaptive evolution in locomotor performance: How selective pressures and functional relationships produce diversity.

Science.gov (United States)

Scales, Jeffrey A; Butler, Marguerite A

2016-01-01

Despite the complexity of nature, most comparative studies of phenotypic evolution consider selective pressures in isolation. When competing pressures operate on the same system, it is commonly expected that trade-offs will occur that will limit the evolution of phenotypic diversity, however, it is possible that interactions among selective pressures may promote diversity instead. We explored the evolution of locomotor performance in lizards in relation to possible selective pressures using the Ornstein-Uhlenbeck process. Here, we show that a combination of selection based on foraging mode and predator escape is required to explain variation in performance phenotypes. Surprisingly, habitat use contributed little explanatory power. We find that it is possible to evolve very different abilities in performance which were previously thought to be tightly correlated, supporting a growing literature that explores the many-to-one mapping of morphological design. Although we generally find the expected trade-off between maximal exertion and speed, this relationship surprisingly disappears when species experience selection for both performance types. We conclude that functional integration need not limit adaptive potential, and that an integrative approach considering multiple major influences on a phenotype allows a more complete understanding of adaptation and the evolution of diversity. © 2015 The Author(s). Evolution © 2015 The Society for the Study of Evolution.

Does Residency Selection Criteria Predict Performance in Orthopaedic Surgery Residency?

Science.gov (United States)

Raman, Tina; Alrabaa, Rami George; Sood, Amit; Maloof, Paul; Benevenia, Joseph; Berberian, Wayne

2016-04-01

More than 1000 candidates applied for orthopaedic residency positions in 2014, and the competition is intense; approximately one-third of the candidates failed to secure a position in the match. However, the criteria used in the selection process often are subjective and studies have differed in terms of which criteria predict either objective measures or subjective ratings of resident performance by faculty. Do preresidency selection factors serve as predictors of success in residency? Specifically, we asked which preresidency selection factors are associated or correlated with (1) objective measures of resident knowledge and performance; and (2) subjective ratings by faculty. Charts of 60 orthopaedic residents from our institution were reviewed. Preresidency selection criteria examined included United States Medical Licensing Examination (USMLE) Step 1 and Step 2 scores, Medical College Admission Test (MCAT) scores, number of clinical clerkship honors, number of letters of recommendation, number of away rotations, Alpha Omega Alpha (AOA) honor medical society membership, fourth-year subinternship at our institution, and number of publications. Resident performance was assessed using objective measures including American Board of Orthopaedic Surgery (ABOS) Part I scores and Orthopaedics In-Training Exam (OITE) scores and subjective ratings by faculty including global evaluation scores and faculty rankings of residents. We tested associations between preresidency criteria and the subsequent objective and subjective metrics using linear correlation analysis and Mann-Whitney tests when appropriate. Objective measures of resident performance namely, ABOS Part I scores, had a moderate linear correlation with the USMLE Step 2 scores (r = 0.55, p communication skills" subsection of the global evaluations. We found that USMLE Step 2, number of honors in medical school clerkships, and AOA membership demonstrated the strongest correlations with resident performance. Our

Performance Measurement Model for the Supplier Selection Based on AHP

Directory of Open Access Journals (Sweden)

Fabio De Felice

2015-10-01

Full Text Available The performance of the supplier is a crucial factor for the success or failure of any company. Rational and effective decision making in terms of the supplier selection process can help the organization to optimize cost and quality functions. The nature of supplier selection processes is generally complex, especially when the company has a large variety of products and vendors. Over the years, several solutions and methods have emerged for addressing the supplier selection problem (SSP. Experience and studies have shown that there is no best way for evaluating and selecting a specific supplier process, but that it varies from one organization to another. The aim of this research is to demonstrate how a multiple attribute decision making approach can be effectively applied for the supplier selection process.

Integrated model for supplier selection and performance evaluation

Directory of Open Access Journals (Sweden)

Borges de Araújo, Maria Creuza

2015-08-01

Full Text Available This paper puts forward a model for selecting suppliers and evaluating the performance of those already working with a company. A simulation was conducted in a food industry. This sector has high significance in the economy of Brazil. The model enables the phases of selecting and evaluating suppliers to be integrated. This is important so that a company can have partnerships with suppliers who are able to meet their needs. Additionally, a group method is used to enable managers who will be affected by this decision to take part in the selection stage. Finally, the classes resulting from the performance evaluation are shown to support the contractor in choosing the most appropriate relationship with its suppliers.

Predicting work Performance through selection interview ratings and Psychological assessment

Directory of Open Access Journals (Sweden)

Liziwe Nzama

2008-11-01

Full Text Available The aim of the study was to establish whether selection interviews used in conjunction with psychological assessments of personality traits and cognitive functioning contribute to predicting work performance. The sample consisted of 102 managers who were appointed recently in a retail organisation. The independent variables were selection interview ratings obtained on the basis of structured competency-based interview schedules by interviewing panels, fve broad dimensions of personality defned by the Five Factor Model as measured by the 15 Factor Questionnaire (15FQ+, and cognitive processing variables (current level of work, potential level of work, and 12 processing competencies measured by the Cognitive Process Profle (CPP. Work performance was measured through annual performance ratings that focused on measurable outputs of performance objectives. Only two predictor variables correlated statistically signifcantly with the criterion variable, namely interview ratings (r = 0.31 and CPP Verbal Abstraction (r = 0.34. Following multiple regression, only these variables contributed signifcantly to predicting work performance, but only 17.8% of the variance of the criterion was accounted for.

Selection bias in the reported performances of AD classification pipelines

Directory of Open Access Journals (Sweden)

Alex F. Mendelson

2017-01-01

Full Text Available The last decade has seen a great proliferation of supervised learning pipelines for individual diagnosis and prognosis in Alzheimer's disease. As more pipelines are developed and evaluated in the search for greater performance, only those results that are relatively impressive will be selected for publication. We present an empirical study to evaluate the potential for optimistic bias in classification performance results as a result of this selection. This is achieved using a novel, resampling-based experiment design that effectively simulates the optimisation of pipeline specifications by individuals or collectives of researchers using cross validation with limited data. Our findings indicate that bias can plausibly account for an appreciable fraction (often greater than half of the apparent performance improvement associated with the pipeline optimisation, particularly in small samples. We discuss the consistency of our findings with patterns observed in the literature and consider strategies for bias reduction and mitigation.

MEDIATING ROLE OF EMPLOYEE MOTIVATION IN RELATIONSHIP TO POST-SELECTION HRM PRACTICES AND ORGANIZATIONAL PERFORMANCE

Directory of Open Access Journals (Sweden)

Aftab Tariq Dar

2014-07-01

Full Text Available The purpose of this cross-sectional study was to explore the meditating role of employee motivation in the relationship between post-selection Human Resource Management (HRM practices and perceived performance of Islamic Banks operating in Pakistan. This study was based on primary data collected from 200-employees of different Islamic banks in Pakistan by distributing structured and reliable questionnaires. The demographic profile of respondents was diversified in terms of their grade, age, experience and education. Results of correlation analysis revealed that training & development(r = .829, performance evaluation system(r = .752, career development system(r = .666, extrinsic rewards(r = .921, intrinsic rewards (r = .852 and employee motivation(r =.722 have strong positive association with perceived performance of Islamic banks in Pakistan. Results of hierarchical regression analysis supported that post-selection HRM practices have positive impact on perceived organizational performance and employee motivation acts as mediator in the relationship between post-selection HRM practices and perceived organizational performance. Proper implementation of post-selection HRM practices makes employee motivated that resulted in improved organizational performance. Management of Islamic banks desiring optimum performance should pay special attention to need-based training programs, merit-based performance appraisal system, development of progressive career paths, performance-based extrinsic and intrinsic rewards management. While making HRM policies, employee motivation should be given paramount importance as the results of contemporary studies supported that it is the major contributing factor of higher organizational performance.

Lifespan changes in global and selective stopping and performance adjustments

Directory of Open Access Journals (Sweden)

Maria Christina Van De Laar

2011-12-01

Full Text Available This study examined stopping and performance adjustments in four age groups (M ages: 8, 12, 21, and 76 years. All participants performed on three tasks, a standard two-choice task and the same task in which stop-signal trials were inserted requiring either the suppression of the response activated by the choice stimulus (global stop task or the suppression of the response when one stop signal was presented but not when the other stop signal occurred (selective stop task. The results showed that global stopping was faster than selective stopping in all age groups. Global stopping matured more rapidly than selective stopping. The developmental gain in stopping was considerably more pronounced compared to the loss observed during senescence. All age groups slowed the response on trials without a stop signal in the stop task compared to trials in the choice task, the elderly in particular. In addition, all age groups slowed on trials following stop-signal trials, except the elderly who did not slow following successful inhibits. By contrast, the slowing following failed inhibits was disproportionally larger in the elderly compared to young adults. Finally, sequential effects did not alter the pattern of performance adjustments. The results were interpreted in terms of developmental change in the balance between proactive and reactive control.

Lifespan Changes in Global and Selective Stopping and Performance Adjustments

Science.gov (United States)

van de Laar, Maria C.; van den Wildenberg, Wery P. M.; van Boxtel, Geert J. M.; van der Molen, Maurits W.

2011-01-01

This study examined stopping and performance adjustments in four age groups (M ages: 8, 12, 21, and 76 years). All participants performed on three tasks, a standard two-choice task and the same task in which stop-signal trials were inserted requiring either the suppression of the response activated by the choice stimulus (global stop task) or the suppression of the response when one stop-signal was presented but not when the other stop-signal occurred (selective stop task). The results showed that global stopping was faster than selective stopping in all age groups. Global stopping matured more rapidly than selective stopping. The developmental gain in stopping was considerably more pronounced compared to the loss observed during senescence. All age groups slowed the response on trials without a stop-signal in the stop task compared to trials in the choice task, the elderly in particular. In addition, all age groups slowed on trials following stop-signal trials, except the elderly who did not slow following successful inhibits. By contrast, the slowing following failed inhibits was disproportionally larger in the elderly compared to young adults. Finally, sequential effects did not alter the pattern of performance adjustments. The results were interpreted in terms of developmental change in the balance between proactive and reactive control. PMID:22180746

Benchmarking the Performance of Construction Procurement Methods against Selection Criteria in Nigeria

Directory of Open Access Journals (Sweden)

Stephen Okunlola Ojo

2009-01-01

Full Text Available The study developed performance indices by the widely used procurement options in Nigeria on selection criteria. The traditional mean and standardized ratio were used to form the utility coefficients. Results revealed that performance by the procurement options depended on the respondents’ categorization and cost categorization of projects. Public clients ranked the lump sum contracts more able to achieve speed for projects up to N100 million (Naira while the private clients believe it is the design-build. As regards quality, public clients rated the Build-Own-Operate-Transfer (BOOT system as most able to achieve the quality criterion whereas private clients rated design-build for projects up to N100 million (Naira. The study then concluded that, in the Nigerian construction industry participants do not agree on the performance of the procurement options on selection criteria.

A performance analysis in AF full duplex relay selection network

Science.gov (United States)

Ngoc, Long Nguyen; Hong, Nhu Nguyen; Loan, Nguyen Thi Phuong; Kieu, Tam Nguyen; Voznak, Miroslav; Zdralek, Jaroslav

2018-04-01

This paper studies on the relaying selective matter in amplify-and-forward (AF) cooperation communication with full-duplex (FD) activity. Various relay choice models supposing the present of different instant information are investigated. We examine a maximal relaying choice that optimizes the instant FD channel capacity and asks for global channel state information (CSI) as well as partial CSI learning. To make comparison easy, accurate outage probability clauses and asymptote form of these strategies that give a diversity rank are extracted. From that, we can see clearly that the number of relays, noise factor, the transmittance coefficient as well as the information transfer power had impacted on their performance. Besides, the optimal relay selection (ORS) model can promote than that of the partial relay selection (PRS) model.

Burnout and job performance: the moderating role of selection, optimization, and compensation strategies.

Science.gov (United States)

Demerouti, Evangelia; Bakker, Arnold B; Leiter, Michael

2014-01-01

The present study aims to explain why research thus far has found only low to moderate associations between burnout and performance. We argue that employees use adaptive strategies that help them to maintain their performance (i.e., task performance, adaptivity to change) at acceptable levels despite experiencing burnout (i.e., exhaustion, disengagement). We focus on the strategies included in the selective optimization with compensation model. Using a sample of 294 employees and their supervisors, we found that compensation is the most successful strategy in buffering the negative associations of disengagement with supervisor-rated task performance and both disengagement and exhaustion with supervisor-rated adaptivity to change. In contrast, selection exacerbates the negative relationship of exhaustion with supervisor-rated adaptivity to change. In total, 42% of the hypothesized interactions proved to be significant. Our study uncovers successful and unsuccessful strategies that people use to deal with their burnout symptoms in order to achieve satisfactory job performance. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Human Resource Valuation and the Performance of Selected Banks ...

African Journals Online (AJOL)

Human Resource Valuation and the Performance of Selected Banks in ... the researcher gathered data from Nigerian banks listed in the Nigeria Stock ... Conclusively, human resources cost approach to corporate performance measurement ...

A Performance Comparison of Nine Selected Liquid Scintillation Cocktails

Energy Technology Data Exchange (ETDEWEB)

Verrezen, F; Loots, H; Hurtgen, Ch

2008-06-15

In the selection of a suitable liquid scintillation (LSC) cocktail, the primary aspects taken into consideration are overall cocktail performance and specific laboratory needs. Overall performance of 9 selected, commercially available LSC cocktails was assessed by studying parameters of importance for the requirements of the Laboratory for Low Level Radioactivity Measurements of SCK-CEN: sample load capacity, sample compatibility, influence of sample load on counting efficiency, background count rate, figure of merit, quench resistance, sample stability and alpha/beta separation characteristics. The cocktails tested were EcoscintA, Insta Gel Plus, OptiPhase Hisafe3, OptiPhase Trisafe, Ready Gel, SafeScint 1:1, Ultima Gold, Ultima Gold LLT, and Ultima Gold XR. For the data acquisition a Packard TriCarb Model 1900CA and a Quantulus 1220 liquid scintillation counter is used. All samples were prepared in either 20 mL low potassium, borosilicate glass vials or 20 mL high density, polyethylene vials. The aim of this study was to determine a single cocktail that best suits all measurement requirements of the liquid scintillation laboratory at SCK-CEN for the determination of low levels of radioactivity in biological and environmental samples. As a conclusion, Optiphase HiSafe 3 was confirmed to be the optimal cocktail for the laboratory.

A Performance Comparison of Nine Selected Liquid Scintillation Cocktails

International Nuclear Information System (INIS)

Verrezen, F.; Loots, H.; Hurtgen, Ch.

2008-01-01

In the selection of a suitable liquid scintillation (LSC) cocktail, the primary aspects taken into consideration are overall cocktail performance and specific laboratory needs. Overall performance of 9 selected, commercially available LSC cocktails was assessed by studying parameters of importance for the requirements of the Laboratory for Low Level Radioactivity Measurements of SCK-CEN: sample load capacity, sample compatibility, influence of sample load on counting efficiency, background count rate, figure of merit, quench resistance, sample stability and alpha/beta separation characteristics. The cocktails tested were EcoscintA, Insta Gel Plus, OptiPhase Hisafe3, OptiPhase Trisafe, Ready Gel, SafeScint 1:1, Ultima Gold, Ultima Gold LLT, and Ultima Gold XR. For the data acquisition a Packard TriCarb Model 1900CA and a Quantulus 1220 liquid scintillation counter is used. All samples were prepared in either 20 mL low potassium, borosilicate glass vials or 20 mL high density, polyethylene vials. The aim of this study was to determine a single cocktail that best suits all measurement requirements of the liquid scintillation laboratory at SCK-CEN for the determination of low levels of radioactivity in biological and environmental samples. As a conclusion, Optiphase HiSafe 3 was confirmed to be the optimal cocktail for the laboratory.

Nuclear site selection studies

International Nuclear Information System (INIS)

Gharib, A.; Zohoorian Izadpanah, A.A.; Iranmanesh, H.

2000-01-01

It is of special importance, especially from the nuclear safety viewpoint, to select suitable sites for different nuclear structures with the considered future activities. Site selection sometimes involves high costs not necessarily for merely selecting of site but for some preliminary measures to be taken so as the site may have the necessary characteristics. The more suitable the natural characteristics of the site for the considered project, the more successful and efficient the project, the lower the project costs and the longer the project operation period. If so, the project will cause the growth of public culture and sustainable socioeconomic development. This paper is the result of the conclusion of numerous massive reports of this activity in the preliminary phase based on theories, practices and the related safety principles on this ground as well as the application of data and information of the past and a glance to the future. The conception of need for a site for medium structures and nuclear research projects and how to perform this process are presented step by step here with a scientific approach to its selection during the investigations. In this study, it is practically described how the site is selected, by determining and defining the characteristics of research and nuclear projects with medium structures and also its fitting to the optimum site. The discovered sites typically involve the best advantages in technical and economic aspects and no particular contrast with the concerned structures

Education and entrepreneurship selection and performance: A review of the empirical literature

NARCIS (Netherlands)

van der Sluis, J.; van Praag, M.; Vijverberg, W.

2008-01-01

This paper provides a review of empirical studies into the impact of formal schooling on entrepreneurship selection and performance in industrial countries. We describe the main effects found in the literature, we explain the variance in results across almost a hundred studies, and we put the

Case Study on Logistics Performance

Directory of Open Access Journals (Sweden)

Shahryar Sorooshian

2013-05-01

Full Text Available The paper presents research carried out at a medium‐size manufacturing organization in east Asia. The study tries to highlight the importance of supply chain management; specifically, our aim for this study is to understand logistics and performance measurement in the logistics and supply chain, and we include a theoretical discussion of online data collected and a case study of the logistic performance of a real organization. The study also examines the performance of the selected company, identifies the problems and provides recommendations for improvements. This study can be a guide for business advisers and those interested in analysing company performance, especially from a logistics viewpoint. We also suggest the methodology of this case study for those who want to have a better understanding of a business environment before starting their own business, or for benchmarking practice during strategic planning.

Modeling Student Performance in Mathematics Using Binary Logistic Regression at Selected Secondary Schools a Case Study of Mtwara Municipality and Ilemela District

Science.gov (United States)

Mabula, Salyungu

2015-01-01

This study investigated the performance of secondary school students in Mathematics at the Selected Secondary Schools in Mtwara Municipality and Ilemela District by Absenteeism, Conduct, Type of School and Gender as explanatory Factors. The data used in the study was collected from documented records of 250 form three students with 1:1 gender…

Selection and Use of Performance Indicators in Decommissioning

International Nuclear Information System (INIS)

2011-01-01

The success of completing a decommissioning project on schedule and budget is determined by the ability to define a clear endpoint (outcome), to accurately determine intermediate progress, and develop reliable forecasts to complete remaining tasks. Performance indicators are used to examine those aspects that are crucial to this success. This information is required by and periodically reported to various stakeholders. Although the practice of nuclear decommissioning is maturing, it would benefit from optimal use of performance indicators. Performance measurement is the 'heart and soul' of the performance based management process. Flowing from the organizational mission and the strategic planning process, it provides the data that will be collected, analysed, reported and ultimately, used to make sound business decisions. It directs the business function by documenting progress towards established objectives, identifying areas of both strength and weakness, and justifying budgetary expenditures. In this report, practical advice is provided on the effective use of performance indicators to measure and report on the achievement of the goals and plans of a nuclear decommissioning project. The structure of the report takes the reader progressively through all aspects of designing, selecting and using performance indicators. A process for setting up a performance indicator system against basic principles is presented, including a discussion of each step in the process. The report also provides an expanded discussion of the most important influences on the identification and selection of performance indicators. Finally, practical guidance on the use of performance indicators in specific Member States is provided together with field experience.

Persistent Performance of Fund Managers: An Analysis of Selection and Timing Skills

Directory of Open Access Journals (Sweden)

Bilal Ahmad Pandow

2017-11-01

Full Text Available The persistence in manager’s ability to select stocks and to time risk factors is a vital issue for accessing the performance of any asset management company. The fund manager who comes out successful today, whether the same will be able to sustain the performance in the future is a matter of concern to the investors and other stake holders. More than the stock picking ability of fund managers, one would be interested in knowing whether there is consistency in selectivity and timing performance or not. If a fund manager is able to deliver better performance consistently i.e. quarter-after-quarter or year-after-year, then the mangers’ performance in selecting the right type of stocks for the portfolio would be considered satisfactory. This paper has attempted to analyze the persistence in both stock selection and timing performance of mutual fund managers in India through Henriksson & Morton; Jenson, and Fama’s model over a period of five years. It is found that the fund managers present persistence in selection skills however, the sample funds haven’t shown progressive timing skills in Indian context.

Sensor Selection for Aircraft Engine Performance Estimation and Gas Path Fault Diagnostics

Science.gov (United States)

Simon, Donald L.; Rinehart, Aidan W.

2016-01-01

This paper presents analytical techniques for aiding system designers in making aircraft engine health management sensor selection decisions. The presented techniques, which are based on linear estimation and probability theory, are tailored for gas turbine engine performance estimation and gas path fault diagnostics applications. They enable quantification of the performance estimation and diagnostic accuracy offered by different candidate sensor suites. For performance estimation, sensor selection metrics are presented for two types of estimators including a Kalman filter and a maximum a posteriori estimator. For each type of performance estimator, sensor selection is based on minimizing the theoretical sum of squared estimation errors in health parameters representing performance deterioration in the major rotating modules of the engine. For gas path fault diagnostics, the sensor selection metric is set up to maximize correct classification rate for a diagnostic strategy that performs fault classification by identifying the fault type that most closely matches the observed measurement signature in a weighted least squares sense. Results from the application of the sensor selection metrics to a linear engine model are presented and discussed. Given a baseline sensor suite and a candidate list of optional sensors, an exhaustive search is performed to determine the optimal sensor suites for performance estimation and fault diagnostics. For any given sensor suite, Monte Carlo simulation results are found to exhibit good agreement with theoretical predictions of estimation and diagnostic accuracies.

Optimizing drilling performance using a selected drilling fluid

Science.gov (United States)

Judzis, Arnis [Salt Lake City, UT; Black, Alan D [Coral Springs, FL; Green, Sidney J [Salt Lake City, UT; Robertson, Homer A [West Jordan, UT; Bland, Ronald G [Houston, TX; Curry, David Alexander [The Woodlands, TX; Ledgerwood, III, Leroy W.

2011-04-19

To improve drilling performance, a drilling fluid is selected based on one or more criteria and to have at least one target characteristic. Drilling equipment is used to drill a wellbore, and the selected drilling fluid is provided into the wellbore during drilling with the drilling equipment. The at least one target characteristic of the drilling fluid includes an ability of the drilling fluid to penetrate into formation cuttings during drilling to weaken the formation cuttings.

Selection criteria for building performance simulation tools : contrasting architects' and engineers' needs

NARCIS (Netherlands)

Attia, S.G.; Hensen, J.L.M.; Beltran, L.; De Herde, A.

2012-01-01

This article summarises a study undertaken to reveal potential challenges and opportunities for using building performance simulation (BPS) tools. The article reviews current trends in building simulation and outlines major criteria for BPS tool selection and evaluation based on analysing users'

Financial Performance of Irrigation Associations: Selected Cases from Turkey

Directory of Open Access Journals (Sweden)

Erol H. Cakmak

2006-01-01

Full Text Available The objective of the study was to trace the performance of selected irrigation associations after the transfer of operation and maintenance (O&M activities from the state to the farmers. Four irrigation associations were selected according to the regional and cropping pattern diversity. The area of the selected associations made up slightly more than 5 percent of the total transferred area. The data for the different types of revenues and expenses of the associations were obtained from the annual reports of the associations to the State Hydraulic Works. Results suggest that irrigation associations are able to fulfill irrigation tasks to a large extent using enhanced equipment. Fee collection rates are at improved levels, despite delays in payments, mainly due to the mismatch of the financial and production calendars. Dominant cropping patterns for cotton lead to higher and increasing O&M expenditures compared to cereals. Although the transfers increased the adjustment ability of farmers to exogenous factors, the findings suggest that it is still too early to decide on the sustainability of the transfer program.

Perception of performance management and rewards in selected ...

African Journals Online (AJOL)

... rewards in selected public sector organisations in Ghana: a test of the systems theory. ... products and services for customers inside and outside the organization. ... of performance management effectiveness and also establish a relationship ...

Parameter Selection and Performance Analysis of Mobile Terminal Models Based on Unity3D

Institute of Scientific and Technical Information of China (English)

KONG Li-feng; ZHAO Hai-ying; XU Guang-mei

2014-01-01

Mobile platform is now widely seen as a promising multimedia service with a favorable user group and market prospect. To study the influence of mobile terminal models on the quality of scene roaming, a parameter setting platform of mobile terminal models is established to select the parameter selection and performance index on different mobile platforms in this paper. This test platform is established based on model optimality principle, analyzing the performance curve of mobile terminals in different scene models and then deducing the external parameter of model establishment. Simulation results prove that the established test platform is able to analyze the parameter and performance matching list of a mobile terminal model.

The Facial Appearance of CEOs: Faces Signal Selection but Not Performance

Science.gov (United States)

Garretsen, Harry; Spreeuwers, Luuk J.

2016-01-01

Research overwhelmingly shows that facial appearance predicts leader selection. However, the evidence on the relevance of faces for actual leader ability and consequently performance is inconclusive. By using a state-of-the-art, objective measure for face recognition, we test the predictive value of CEOs’ faces for firm performance in a large sample of faces. We first compare the faces of Fortune500 CEOs with those of US citizens and professors. We find clear confirmation that CEOs do look different when compared to citizens or professors, replicating the finding that faces matter for selection. More importantly, we also find that faces of CEOs of top performing firms do not differ from other CEOs. Based on our advanced face recognition method, our results suggest that facial appearance matters for leader selection but that it does not do so for leader performance. PMID:27462986

Temporal evolution of the environmental performance of implementing selective collection in municipal waste management systems in developing countries: A Brazilian case study.

Science.gov (United States)

Ibáñez-Forés, Valeria; Bovea, María D; Coutinho-Nóbrega, Claudia; de Medeiros-García, Hozana R; Barreto-Lins, Raissa

2018-02-01

The aim of this study is to analyse the evolution of the municipal solid waste management system of João Pessoa (Brazil), which was one of the Brazilian pioneers cities in implementing door-to-door selective collection programmes, in order to analyse the effect of policy decisions adopted in last decade with regard to selective collection. To do it, this study focuses on analysing the evolution, from 2005 to 2015, of the environmental performance of the municipal solid waste management (MSWM) system implemented in different sorting units with selective collection programmes by applying the Life Cycle Assessment (LCA) methodology and using as a starting point data collected directly from the different stakeholders involved in the MSWM system. This article presents the temporal evolution of environmental indicators measuring the environmental performance of the MSWM system implemented in João Pessoa by sorting unit, for each stage of the life cycle of the waste (collection, classification, intermediate transports, recycling and landfilling), for each waste fraction and for each collection method (selective collection or mixed collection), with the aim of identifying the key aspects with the greatest environmental impact and their causes. Results show on one hand, that environmental behaviour of waste management in a door-to-door selective collection programme significantly improves the behaviour of the overall waste management system. Consequently, the potential to reduce the existing environmental impact based on citizens' increased participation in selective collection is evidenced, so the implementation of awareness-raising campaigns should be one of the main issues of the next policies on solid waste. On the other hand, increasing the amount of recyclable wastes collected selectively, implementing alternative methods for valorising the organic fraction (compost/biomethanization) and improving the efficiency of the transportation stage by means of optimizing

Effects of musical tempo on physiological, affective, and perceptual variables and performance of self-selected walking pace.

Science.gov (United States)

Almeida, Flávia Angélica Martins; Nunes, Renan Felipe Hartmann; Ferreira, Sandro Dos Santos; Krinski, Kleverton; Elsangedy, Hassan Mohamed; Buzzachera, Cosme Franklin; Alves, Ragami Chaves; Gregorio da Silva, Sergio

2015-06-01

[Purpose] This study investigated the effects of musical tempo on physiological, affective, and perceptual responses as well as the performance of self-selected walking pace. [Subjects] The study included 28 adult women between 29 and 51 years old. [Methods] The subjects were divided into three groups: no musical stimulation group (control), and 90 and 140 beats per minute musical tempo groups. Each subject underwent three experimental sessions: involved familiarization with the equipment, an incremental test to exhaustion, and a 30-min walk on a treadmill at a self-selected pace, respectively. During the self-selected walking session, physiological, perceptual, and affective variables were evaluated, and walking performance was evaluated at the end. [Results] There were no significant differences in physiological variables or affective response among groups. However, there were significant differences in perceptual response and walking performance among groups. [Conclusion] Fast music (140 beats per minute) promotes a higher rating of perceived exertion and greater performance in self-selected walking pace without significantly altering physiological variables or affective response.

Marketing strategy and product performance: a study of selected ...

African Journals Online (AJOL)

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Differences in gender performance on competitive physics selection tests

Science.gov (United States)

Wilson, Kate; Low, David; Verdon, Matthew; Verdon, Alix

2016-12-01

[This paper is part of the Focused Collection on Gender in Physics.] We have investigated gender differences in performance over the past eight years on the Australian Science Olympiad Exam (ASOE) for physics, which is taken by nearly 1000 high school students each year. The ASOE, run by Australian Science Innovations (ASI), is the initial stage of the process of selection of teams to represent Australia at the Asian and International Physics Olympiads. Students taking the exam are generally in their penultimate year of school and selected by teachers as being high performing in physics. Together with the overall differences in facility, we have investigated how the content and presentation of multiple-choice questions (MCQs) affects the particular answers selected by male and female students. Differences in the patterns of responses by male and female students indicate that males and females might be modeling situations in different ways. Some strong patterns were found in the gender gaps when the questions were categorized in five broad dimensions: content, process required, difficulty, presentation, and context. Almost all questions saw male students performing better, although gender differences were relatively small for questions with a more abstract context. Male students performed significantly better on most questions with a concrete context, although notable exceptions were found, including two such questions where female students performed better. Other categories that showed consistently large gaps favoring male students include questions with projectile motion and other two-dimensional motion or forces content, and processes involving interpreting diagrams. Our results have important implications, suggesting that we should be able to reduce the gender gaps in performance on MCQ tests by changing the way information is presented and setting questions in contexts that are less likely to favor males over females. This is important as MCQ tests are

Business Startups: An analysis of selection and post-startup performance (Japanese)

OpenAIRE

YASUDA Takehiko

2010-01-01

This paper investigates how the pre-startup circumstances surrounding an entrepreneur, during the time when he or she decides to start a business, affects the post-startup performance. Based on the original dataset, sample selection models are estimated connecting nascent entrepreneurs' selection of a startup with actual entrepreneurs' performance post-startup. The results of this paper confirm that the individual attributes of nascent entrepreneurs, which make it easier (difficult) to decide...

Determinants of Students' Academic Performance in Four Selected Accounting Courses at University of Zimbabwe

Science.gov (United States)

Nyikahadzoi, Loveness; Matamande, Wilson; Taderera, Ever; Mandimika, Elinah

2013-01-01

The study seeks to establish scientific evidence of the factors affecting academic performance for first year accounting students using four selected courses at the University of Zimbabwe. It uses Ordinary Least Squares method to analyse the influence of personal and family background on performance. The findings show that variables age gender,…

Selective loads periodization attenuates biochemical disturbances and enhances performance in female futsal players during competitive season

Directory of Open Access Journals (Sweden)

Ricelli Endrigo Ruppel da Rocha

2015-06-01

Full Text Available This study evaluated the effect of selective loads periodization on physical performance and biochemical parameters in professional female futsal players during competitive season. Twelve elite female futsal players from Kindermann team (Brazil participated in the study. Variables of physical performance and erythrogram, leukogram, plasma cortisol, plasma immunoglobulin A (IgA in the beginning of the preparatory period (PP, in the competitive period (CP and in the final competitive period (FCP were evaluated. Using selective loads periodization, all variables of physical performance increased (p < .01 during CP and were maintained during FCP (p < .05. White blood cells did not modify during CP and the increase of FCP in 28% remained within normal ranges. Plasma cortisol also increased during CP (p < .01 and was within the normal ranges during FCP. Plasma IgA also was within the normal ranges during CP and FCP. Selective loads periodization is adequate and attends the requirements of the sport during competitive season in female futsal players.

Integrated shape and material selection for single and multi-performance criteria

International Nuclear Information System (INIS)

Singh, Jasveer; Mirjalili, Vahid; Pasini, Damiano

2011-01-01

Research highlights: → The method of shape transformers is extended to torsional stiffness and combined load design. → The method is generalized for multi-criteria selection of shape and material. → Performance charts are presented for single and multi-objective selection of cross-section shape and material. → A four quadrant performance chart is presented to visualize the relation between objective function space and design variable space. -- Abstract: A shape and material selection method, based on the concept of shape transformers, has been recently introduced to characterize the mass efficiency of lightweight beams under bending and shear. This paper extends this method to deal with the case of torsional stiffness design, and generalize it to single and multi-crieria selection of lightweight shafts subjected to a combination of bending, shear, and torsional load. The novel feature of the paper is the useful integration of shape and material to model and visualize multi-objective selection problems. The scheme is centered on concept selection in structural design, and hinges on measures that govern the shape properties of a cross-section regardless of its size. These measures, referred as shape transformers, can classify shapes in a way similar to material classification. The procedure is exemplified by considering torsional stiffness as a constraint. The performance charts are developed for single and multi-criteria to visualize in a glance the whole range of cross-sectional shapes for each material. Each design chart is explained with a brief example.

Sequence Selection and Performance in DS/CDMA Systems

Directory of Open Access Journals (Sweden)

Jefferson Santos Ambrosio

2016-03-01

Full Text Available In this work key concepts on coding division multiple access (CDMA communication systems have been discussed. The sequence selection impact on the performance and capacity of direct sequence CDMA (DS/CDMA systems under AWGN and increasing system loading, as well as under multiple antennas channels was investigated.

Do candidate reactions relate to job performance or affect criterion-related validity? A multistudy investigation of relations among reactions, selection test scores, and job performance.

Science.gov (United States)

McCarthy, Julie M; Van Iddekinge, Chad H; Lievens, Filip; Kung, Mei-Chuan; Sinar, Evan F; Campion, Michael A

2013-09-01

Considerable evidence suggests that how candidates react to selection procedures can affect their test performance and their attitudes toward the hiring organization (e.g., recommending the firm to others). However, very few studies of candidate reactions have examined one of the outcomes organizations care most about: job performance. We attempt to address this gap by developing and testing a conceptual framework that delineates whether and how candidate reactions might influence job performance. We accomplish this objective using data from 4 studies (total N = 6,480), 6 selection procedures (personality tests, job knowledge tests, cognitive ability tests, work samples, situational judgment tests, and a selection inventory), 5 key candidate reactions (anxiety, motivation, belief in tests, self-efficacy, and procedural justice), 2 contexts (industry and education), 3 continents (North America, South America, and Europe), 2 study designs (predictive and concurrent), and 4 occupational areas (medical, sales, customer service, and technological). Consistent with previous research, candidate reactions were related to test scores, and test scores were related to job performance. Further, there was some evidence that reactions affected performance indirectly through their influence on test scores. Finally, in no cases did candidate reactions affect the prediction of job performance by increasing or decreasing the criterion-related validity of test scores. Implications of these findings and avenues for future research are discussed. PsycINFO Database Record (c) 2013 APA, all rights reserved

Selected Organizational Factors Affecting Performance of Professional Nurses in North West Bank Governmental Hospitals

Science.gov (United States)

Thulth, Ahida Saleem; Sayej, Sumaya

2015-01-01

Background: Organizational factors are considered to be the cornerstone in achieving psychological and professional security at work, which in turn are positively reflected in job performance both quantitatively and qualitatively. Aim of the Study: The study aimed to assess of selected organizational factors (workload, available recourses and…

Differences in gender performance on competitive physics selection tests

Directory of Open Access Journals (Sweden)

Kate Wilson

2016-08-01

Full Text Available [This paper is part of the Focused Collection on Gender in Physics.] We have investigated gender differences in performance over the past eight years on the Australian Science Olympiad Exam (ASOE for physics, which is taken by nearly 1000 high school students each year. The ASOE, run by Australian Science Innovations (ASI, is the initial stage of the process of selection of teams to represent Australia at the Asian and International Physics Olympiads. Students taking the exam are generally in their penultimate year of school and selected by teachers as being high performing in physics. Together with the overall differences in facility, we have investigated how the content and presentation of multiple-choice questions (MCQs affects the particular answers selected by male and female students. Differences in the patterns of responses by male and female students indicate that males and females might be modeling situations in different ways. Some strong patterns were found in the gender gaps when the questions were categorized in five broad dimensions: content, process required, difficulty, presentation, and context. Almost all questions saw male students performing better, although gender differences were relatively small for questions with a more abstract context. Male students performed significantly better on most questions with a concrete context, although notable exceptions were found, including two such questions where female students performed better. Other categories that showed consistently large gaps favoring male students include questions with projectile motion and other two-dimensional motion or forces content, and processes involving interpreting diagrams. Our results have important implications, suggesting that we should be able to reduce the gender gaps in performance on MCQ tests by changing the way information is presented and setting questions in contexts that are less likely to favor males over females. This is important as MCQ

Differences in exam performance between pupils attending selective and non-selective schools mirror the genetic differences between them

Science.gov (United States)

Smith-Woolley, Emily; Pingault, Jean-Baptiste; Selzam, Saskia; Rimfeld, Kaili; Krapohl, Eva; von Stumm, Sophie; Asbury, Kathryn; Dale, Philip S.; Young, Toby; Allen, Rebecca; Kovas, Yulia; Plomin, Robert

2018-03-01

On average, students attending selective schools outperform their non-selective counterparts in national exams. These differences are often attributed to value added by the school, as well as factors schools use to select pupils, including ability, achievement and, in cases where schools charge tuition fees or are located in affluent areas, socioeconomic status. However, the possible role of DNA differences between students of different schools types has not yet been considered. We used a UK-representative sample of 4814 genotyped students to investigate exam performance at age 16 and genetic differences between students in three school types: state-funded, non-selective schools (`non-selective'), state-funded, selective schools (`grammar') and private schools, which are selective (`private'). We created a genome-wide polygenic score (GPS) derived from a genome-wide association study of years of education (EduYears). We found substantial mean genetic differences between students of different school types: students in non-selective schools had lower EduYears GPS compared to those in grammar (d = 0.41) and private schools (d = 0.37). Three times as many students in the top EduYears GPS decile went to a selective school compared to the bottom decile. These results were mirrored in the exam differences between school types. However, once we controlled for factors involved in pupil selection, there were no significant genetic differences between school types, and the variance in exam scores at age 16 explained by school type dropped from 7% to <1%. These results show that genetic and exam differences between school types are primarily due to the heritable characteristics involved in pupil admission.

Laboratory selection for increased longevity in Drosophila melanogaster reduces field performance

DEFF Research Database (Denmark)

Wit, Janneke; Kristensen, Torsten Nygaard; Sarup, Pernille

2013-01-01

, environmental temperature and longevity selection on performance in the fieldwas tested. Flies fromlongevity selected and control lines of different ages (2, 5, 10 and 15 days) were released in an environment free of natural food sources. Control flies were tested at low, intermediate and high temperatures......Drosophilamelanogaster is frequently used in ageing studies to elucidate whichmechanisms determine the onset and progress of senescence. Lines selected for increased longevity have often been shown to performaswell as or superior to control lines in life history, stress resistance and behavioural......,while longevity selected flieswere tested at the intermediate temperature only. The ability of flies to locate and reach a food sourcewas tested. Flies of intermediate agewere generally better at locating resources than both younger and older flies, where hot and cold environments accelerate the senescent decline...

The impact of feature selection on one and two-class classification performance for plant microRNAs.

Science.gov (United States)

Khalifa, Waleed; Yousef, Malik; Saçar Demirci, Müşerref Duygu; Allmer, Jens

2016-01-01

MicroRNAs (miRNAs) are short nucleotide sequences that form a typical hairpin structure which is recognized by a complex enzyme machinery. It ultimately leads to the incorporation of 18-24 nt long mature miRNAs into RISC where they act as recognition keys to aid in regulation of target mRNAs. It is involved to determine miRNAs experimentally and, therefore, machine learning is used to complement such endeavors. The success of machine learning mostly depends on proper input data and appropriate features for parameterization of the data. Although, in general, two-class classification (TCC) is used in the field; because negative examples are hard to come by, one-class classification (OCC) has been tried for pre-miRNA detection. Since both positive and negative examples are currently somewhat limited, feature selection can prove to be vital for furthering the field of pre-miRNA detection. In this study, we compare the performance of OCC and TCC using eight feature selection methods and seven different plant species providing positive pre-miRNA examples. Feature selection was very successful for OCC where the best feature selection method achieved an average accuracy of 95.6%, thereby being ∼29% better than the worst method which achieved 66.9% accuracy. While the performance is comparable to TCC, which performs up to 3% better than OCC, TCC is much less affected by feature selection and its largest performance gap is ∼13% which only occurs for two of the feature selection methodologies. We conclude that feature selection is crucially important for OCC and that it can perform on par with TCC given the proper set of features.

The impact of feature selection on one and two-class classification performance for plant microRNAs

Directory of Open Access Journals (Sweden)

Waleed Khalifa

2016-06-01

Full Text Available MicroRNAs (miRNAs are short nucleotide sequences that form a typical hairpin structure which is recognized by a complex enzyme machinery. It ultimately leads to the incorporation of 18–24 nt long mature miRNAs into RISC where they act as recognition keys to aid in regulation of target mRNAs. It is involved to determine miRNAs experimentally and, therefore, machine learning is used to complement such endeavors. The success of machine learning mostly depends on proper input data and appropriate features for parameterization of the data. Although, in general, two-class classification (TCC is used in the field; because negative examples are hard to come by, one-class classification (OCC has been tried for pre-miRNA detection. Since both positive and negative examples are currently somewhat limited, feature selection can prove to be vital for furthering the field of pre-miRNA detection. In this study, we compare the performance of OCC and TCC using eight feature selection methods and seven different plant species providing positive pre-miRNA examples. Feature selection was very successful for OCC where the best feature selection method achieved an average accuracy of 95.6%, thereby being ∼29% better than the worst method which achieved 66.9% accuracy. While the performance is comparable to TCC, which performs up to 3% better than OCC, TCC is much less affected by feature selection and its largest performance gap is ∼13% which only occurs for two of the feature selection methodologies. We conclude that feature selection is crucially important for OCC and that it can perform on par with TCC given the proper set of features.

Children's selective trust decisions: rational competence and limiting performance factors.

Science.gov (United States)

Hermes, Jonas; Behne, Tanya; Bich, Anna Elisa; Thielert, Christa; Rakoczy, Hannes

2018-03-01

Recent research has amply documented that even preschoolers learn selectively from others, preferring, for example, reliable over unreliable and competent over incompetent models. It remains unclear, however, what the cognitive foundations of such selective learning are, in particular, whether it builds on rational inferences or on less sophisticated processes. The current study, therefore, was designed to test directly the possibility that children are in principle capable of selective learning based on rational inference, yet revert to simpler strategies such as global impression formation under certain circumstances. Preschoolers (N = 75) were shown pairs of models that either differed in their degree of competence within one domain (strong vs. weak or knowledgeable vs. ignorant) or were both highly competent, but in different domains (e.g., strong vs. knowledgeable model). In the test trials, children chose between the models for strength- or knowledge-related tasks. The results suggest that, in fact, children are capable of rational inference-based selective trust: when both models were highly competent, children preferred the model with the competence most predictive and relevant for a given task. However, when choosing between two models that differed in competence on one dimension, children reverted to halo-style wide generalizations and preferred the competent models for both relevant and irrelevant tasks. These findings suggest that the rational strategies for selective learning, that children master in principle, can get masked by various performance factors. © 2017 John Wiley & Sons Ltd.

The radiological installation in dental office: selection and performance

International Nuclear Information System (INIS)

Cirre, Christian

2010-01-01

This thesis for a PhD in dental surgery aimed at identifying and analysing different ways to optimise radiographs. In a first part, the author presents the characteristics of X rays, and dosimetric values used in dental offices. He describes the interaction of X rays with living cells by recalling the discovery of biological effects and the emergence of radiation protection, and by discussing the consequences for the patient as well as for the practician. In the next part, the author comments technological advances of devices, and means available to practicians to improve their performance. He presents X ray tubes, discusses factors which influence ray production, and selection criteria, indicates additional devices (beam application tubes, filtration, collimation), discusses the selection of the receiver (types of receivers used in intra-oral radiology, digital or silver film-based sensors), and describes the picture-taking process (radiological techniques, use of angulators and lead shielding). He finally discusses how to optimise intra-oral dental imagery through good practices which comprise optimisation, selection of apparatuses and devices, performance of the radiological act with a patient sitting in the armchair, and maintenance of a good image quality [fr

Marked assisted selection for horses racing performance

Directory of Open Access Journals (Sweden)

Rogério Abdallah Curi

2013-01-01

Full Text Available Although equines have participated in the forming and development of several civilizations around the world since their domestication 6,000 years ago in comparison to other species that have zootechnical interest, few researches have been done related to animal breeding area, especially in Brazil. Some reasons for that are difficulties associated with the species as well as operational aspects. However, developments in genetics in the last decades contributed to a better understanding of the traits related to reproduction, heath, behavior and performance of domestic animals, including equines. Recent technologies as next generation sequencing methods and the high density chips of SNPs for genotyping allowed some advances in the researches already done. These researches used basically the candidate gene strategy, and identified genomic regions related to diseases and syndromes and, more recently, the performance in sport competition and specific abilities. Using these genomic analysis tools, some regions related to race performance have been identified and based on this information; genetic tests to select superior animals for racing performance have started to be available in the market.

A Note on the Determination of "Acceptable" Performance in Thorndike's Standard of Fair Selection.

Science.gov (United States)

Brown, Charles

1980-01-01

The determination of acceptable performance in Thorndike's constant ratio standard of fair selection is considered. It is shown that suitable choice of acceptable performance can make any minority-majority selection disparity consistent with Thorndike's standard. A rule for determining acceptable performance which avoids the Petersen-Novick…

Genetic and developmental factors in spontaneous selective attention: a study of normal twins.

Science.gov (United States)

Myles-Worsley, M; Coon, H

1997-08-08

The Spontaneous Selective Attention Task (SSAT) is a visual word identification task designed to measure the type of selective attention that occurs spontaneously when there are multiple stimuli, all potentially relevant, and insufficient time to process each of them fully. These are conditions which are common in everyday life. SSAT performance is measured by word identification accuracy, first under a baseline divided attention condition with no predictability, then under a selective attention condition with partial predictability introduced via word repetition. Accuracy to identify novel words in the upper location which becomes partially predictable (P words) vs. the lower location which remains non-predictable (N words) can be used to calculate a baseline performance index and a P/N ratio measure of selective attention. The SSAT has been shown to identify an attentional abnormality that may be useful in the development of an attentional endophenotype for family-genetic studies of schizophrenia. This study examined age and genetic effects on SSAT performance in normal children in order to evaluate whether the SSAT has the potential to qualify as a candidate endophenotype for schizophrenia in studies of at-risk children. A total of 59 monozygotic twin pairs and 33 same-sex dizygotic twin pairs ranging from 10 to 18 years of age were tested on the SSAT, a Continuous Performance Test. (CPT), a Span of Apprehension Test (SPAN) and a full-scale IQ test. Baseline performance on the SSAT, which was correlated with verbal IQ and SPAN performance, improved with age but showed no significant heritability. The P/N selectivity ratio was stable over the 10-18-year age range, was not significantly correlated with IQ, CPT, or SPAN performance, and its heritability was estimated to be 0.41. These findings suggest that the P/N selectivity ratio measured by the SSAT may be useful as a vulnerability marker in studies of children born into families segregating schizophrenia.

Measure Guideline: Energy-Efficient Window Performance and Selection

Energy Technology Data Exchange (ETDEWEB)

Carmody, J.; Haglund, K.

2012-11-01

This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all US climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The document also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well. This document is for builders, homeowners, designers and anyone making decisions about selecting energy efficient window. It is intended to complement other Building America information and efforts.

Competitive Strategies and Improved Performance of Selected Nigeria Telecommunication Companies

Directory of Open Access Journals (Sweden)

Waidi Adeniyi Akingbad

2014-01-01

Full Text Available Abstract The influence of globalization in telecommunication companies has greatly increased the level of competition in the industry and they are forced to be competitive to survive. Different types of strategies are put in place in order to be profitable and competitive. All these strategies are directed to attract, retain and maintain customers for continuous profitability. However, majority of them hardly measure the impact of their strategic innovation on their customers. The paper seeks to explore the influence of competitive strategies embarked upon by selected telecommunication companies in Nigeria on their performance. The paper also examines how competitive strategies could be implemented for improved customer satisfaction, retention and loyalty. Three null hypotheses were postulated to test the relationship between lower prices and customer satisfaction, uninterrupted trunk services and customer loyalty, and customer complaint handling and retention. Only customers using telephone service were selected as respondents from Lagos State. The state was stratified in to 20 local government council area and questionnaires were distributed to 125 respondents in each of them. The completion rate of the questionnaire in each of them is between 103 and 110. Survey research design was adopted to carry out the study. A structured questionnaire was designed and validated through the construct validity and tested for confirmation using the KMO measure of sampling adequacy. It was also made reliable using Cronbach’s Alpha test. From the study, findings revealed relationship between competitive strategies and customer satisfaction, retention and loyalty. The findings revealed that there is a relationship between competitive strategies, its constituents and performance of telecommunication companies. It is recommended that universal mobile telecommunication services (UMTS operators should adopt the culture of competitive strategies since it can

On the performance of transmit antenna selection based on shadowing side information

KAUST Repository

Yilmaz, Ahmet Oǧuz; Yilmaz, Ferkan; Alouini, Mohamed-Slim; Kucur, Oǧuz

2013-01-01

In this paper, a transmit antenna selection scheme, which is based on shadowing side information, is investigated. In this scheme, the selected single transmit antenna provides the highest shadowing coefficient between a transmitter and a receiver. By the proposed technique, the frequency of the usage of the feedback channel from the receiver to the transmitter and channel estimation complexity at the receiver can be reduced. We study the performance of our proposed technique, and in the analysis, we consider an independent but not identically distributed generalized-K composite fading model. More specifically, exact and closed-form expressions for the outage probability, the moment-generating function, the moments of signal-to-noise ratio, and the average symbol error probability (SEP) are derived. In addition, asymptotic outage probability and SP expressions are also presented to investigate the diversity order and the array gain. Finally, our theoretical performance results are validated by Monte Carlo simulations. © 2012 IEEE.

Selection of High Performance Alloy for Gas Turbine Blade Using Multiphysics Analysis

Directory of Open Access Journals (Sweden)

H Khawaja

2016-09-01

Full Text Available With the extensive increase in the utilization of energy resources in the modern era, the need of energy extraction from various resources has pronounced in recent years. Thus comprehensive efforts have been made around the globe in the technological development of turbo machines where means of energy extraction is energized fluids. This development led the aviation industry to power boost due to better performing engines. Meanwhile, the structural conformability requirements relative to the functional requirements have also increased with the advent of newer, better performing materials. Thus there is a need to study the material behavior and its usage with the idea of selecting the best possible material for its application. In this work a gas turbine blade of a small turbofan engine, where geometry and aerodynamic data was available, was analyzed for its structural behavior in the proposed mission envelope, where the engine turbine is subjected to high thermal, inertial and aerodynamic loads. Multiphysics Finite Element (FE linear stress analysis was carried out on the turbine blade. The results revealed the upper limit of Ultimate Tensile Strength (UTS for the blade. Based on the limiting factor, high performance alloys were selected from the literature. The two most recommended alloy categories for gas turbine blades are NIMONIC and INCONEL from where total of 21 types of INCONEL alloys and 12 of NIMONIC alloys, available on commercial bases, were analyzed individually to meet the structural requirements. After applying selection criteria, four alloys were finalized from NIMONIC and INCONEL alloys for further analysis. On the basis of stress-strain behavior of finalized alloys, the Multiphysics FE nonlinear stress analysis was then carried out for the selection of the individual alloy by imposing a restriction of Ultimate Factor of Safety (UFOS of 1.33 and yield strength. Final selection is made keeping in view other factors

Selecting team players: Considering the impact of contextual performance and workplace deviance on selection decisions in the National Football League.

Science.gov (United States)

Whiting, Steven W; Maynes, Timothy D

2016-04-01

Contextual performance and workplace deviance likely influence team functioning and effectiveness and should therefore be considered when evaluating job candidates for team-based roles. However, obtaining this information is difficult given a lack of reliable sources and the desire of job applicants to present themselves in a favorable light. Thus, it is unknown whether those selecting employees for teams incorporate prior contextual performance and workplace deviance into their evaluations, or whether doing so improves the quality of selection decisions. To address these issues, we examined the impact of prior task performance, contextual performance, and workplace deviance on National Football League (NFL) decision maker (organizational insider) and external expert (organizational outsider) evaluations of college football players in the NFL draft, using a content analysis methodology to generate measures of contextual performance and workplace deviance. Our findings indicate that insiders value contextual performance more than outsiders, which is likely because of differing interests and goals that lead to different levels of motivation and/or ability to acquire information about prior contextual performance. We also propose that prior task performance, contextual performance, and workplace deviance will predict player performance in the NFL. Our results support this prediction for task and contextual performance. In addition, we investigated the quality of insider and outsider judgments using Brunswik's (1952) lens model. Implications of our findings for the team selection, contextual performance, and workplace deviance literatures are discussed. (c) 2016 APA, all rights reserved).

Selecting Resident Assistants: The Relationship between Candidate Assessment and Job Performance

Science.gov (United States)

Berg, Stephen A.; Stoner, James C.

2016-01-01

Selecting resident assistants is integral to the success of housing operations on college and university campuses. Recruiting high-performing student staff is a priority in achieving departmental goals. Despite the importance of this process and the amount of time and resources expended during selection, there is scarce research investigating the…

Optimal Tuner Selection for Kalman Filter-Based Aircraft Engine Performance Estimation

Science.gov (United States)

Simon, Donald L.; Garg, Sanjay

2010-01-01

A linear point design methodology for minimizing the error in on-line Kalman filter-based aircraft engine performance estimation applications is presented. This technique specifically addresses the underdetermined estimation problem, where there are more unknown parameters than available sensor measurements. A systematic approach is applied to produce a model tuning parameter vector of appropriate dimension to enable estimation by a Kalman filter, while minimizing the estimation error in the parameters of interest. Tuning parameter selection is performed using a multi-variable iterative search routine which seeks to minimize the theoretical mean-squared estimation error. This paper derives theoretical Kalman filter estimation error bias and variance values at steady-state operating conditions, and presents the tuner selection routine applied to minimize these values. Results from the application of the technique to an aircraft engine simulation are presented and compared to the conventional approach of tuner selection. Experimental simulation results are found to be in agreement with theoretical predictions. The new methodology is shown to yield a significant improvement in on-line engine performance estimation accuracy

Assessing the Performance of Imaging Health Systems in Five Selected Hospitals in Uganda

Directory of Open Access Journals (Sweden)

Michael G Kawooya

2012-01-01

Full Text Available Objectives : The first objective of the study was to develop an index termed as the ′Imaging Coverage′ (IC, for measuring the performance of the imaging health systems. This index together with the Hospital-Based Utilization (HBU would then be calculated for five Ugandan hospitals. Second, was to relate the financial resources and existing health policy to the performance of the imaging systems. Materials and Methods: This was a cross-sectional survey employing the triangulation methodology, conducted in Mulago National Referral Hospital. The qualitative study used cluster sampling, in-depth interviews, focus group discussions, and self-administered questionnaires to explore the non-measurable aspects of the imaging systems′ performances. Results: The IC developed and tested as an index for the imaging system′s performance was 36%. General X-rays had the best IC followed by ultrasound. The Hospital-Based Utilization for the five selected hospitals was 186 per thousand and was the highest for general radiography followed by ultrasound. Conclusion: The IC for the five selected hospitals was 36% and the HBU was 186 per thousand, reflecting low performance levels, largely attributable to inadequate funding. There were shortfalls in imaging requisitions and inefficiencies in the imaging systems, financing, and health policy. Although the proportion of inappropriate imaging was small, reducing this inappropriateness even further would lead to a significant total saving, which could be channeled into investigating more patients. Financial resources stood out as the major limitation in attaining the desired performance and there is a need to increase budget funding so as to improve the performance of the imaging health systems.

Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

DEFF Research Database (Denmark)

Feibert, Diana Cordes; Jacobsen, Peter

2015-01-01

Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

The Parameters Selection of PSO Algorithm influencing On performance of Fault Diagnosis

Directory of Open Access Journals (Sweden)

He Yan

2016-01-01

Full Text Available The particle swarm optimization (PSO is an optimization algorithm based on intelligent optimization. Parameters selection of PSO will play an important role in performance and efficiency of the algorithm. In this paper, the performance of PSO is analyzed when the control parameters vary, including particle number, accelerate constant, inertia weight and maximum limited velocity. And then PSO with dynamic parameters has been applied on the neural network training for gearbox fault diagnosis, the results with different parameters of PSO are compared and analyzed. At last some suggestions for parameters selection are proposed to improve the performance of PSO.

Running Performance, VO2max, and Running Economy: The Widespread Issue of Endogenous Selection Bias.

Science.gov (United States)

Borgen, Nicolai T

2018-05-01

Studies in sport and exercise medicine routinely use samples of highly trained individuals in order to understand what characterizes elite endurance performance, such as running economy and maximal oxygen uptake VO 2max . However, it is not well understood in the literature that using such samples most certainly leads to biased findings and accordingly potentially erroneous conclusions because of endogenous selection bias. In this paper, I review the current literature on running economy and VO 2max , and discuss the literature in light of endogenous selection bias. I demonstrate that the results in a large part of the literature may be misleading, and provide some practical suggestions as to how future studies may alleviate endogenous selection bias.

Supervisors' Performance Ratings Correlated with Selected Personal Characteristics of Attendants in a Mental Retardation Developmental Center.

Science.gov (United States)

Frederick, Joseph; And Others

A research study investigated the relationship between personal characteristics and selected demographic data of 75 attendants in a mental retardation developmental center and the assessment by 24 administrators of the attendants' job performance. Instruments used included a 20-item Direct Care Performance Scale and the Demographic Data Scale,…

Danish Mutual Fund Performance - Selectivity, Market Timing and Persistence

DEFF Research Database (Denmark)

Christensen, Michael

Funds under management by Danish mutual funds have increased by 25% annually during the last 10 years and measured per capita Denmark has the third largest mutual fund industry in Europe. This paper provides the first independent performance analysis of Danish mutual funds. We analyse selectivity...

Correlations between PANCE performance, physician assistant program grade point average, and selection criteria.

Science.gov (United States)

Brown, Gina; Imel, Brittany; Nelson, Alyssa; Hale, LaDonna S; Jansen, Nick

2013-01-01

The purpose of this study was to examine correlations between first-time Physician Assistant National Certifying Exam (PANCE) scores and pass/fail status, physician assistant (PA) program didactic grade point average (GPA), and specific selection criteria. This retrospective study evaluated graduating classes from 2007, 2008, and 2009 at a single program (N = 119). There was no correlation between PANCE performance and undergraduate grade point average (GPA), science prerequisite GPA, or health care experience. There was a moderate correlation between PANCE pass/fail and where students took science prerequisites (r = 0.27, P = .003) but not with the PANCE score. PANCE scores were correlated with overall PA program GPA (r = 0.67), PA pharmacology grade (r = 0.68), and PA anatomy grade (r = 0.41) but not with PANCE pass/fail. Correlations between selection criteria and PANCE performance were limited, but further research regarding the influence of prerequisite institution type may be warranted and may improve admission decisions. PANCE scores and PA program GPA correlations may guide academic advising and remediation decisions for current students.

RULES FOR SELECTING AND USING KEY PERFORMANCE INDICATORS FOR THE SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

Alexandra - Elena RUSĂNEANU

2014-06-01

Full Text Available There is no question that performance is the desired result of every activity or action. In order to correctly measure an organization’s performance it is necessary to select key performance indicators (KPIs that will deliver long-term value to the company. KPIs are presenting performance information for all levels of the organization and they are reflecting the progress made so far to achieve strategic objectives. The selection of the key performance indicators must be made according to the organization’s industry and activity. The company must truly understand its business and its mission. Also, KPIs must be closely linked to the strategic objectives. The focus of this research is to present effective rules for defining key performance indicators for the Service industry. This sector of economy consists in generating intangible goods like experience, expertise and information. Therefore, monitoring this type of services requires a different approach when defining performance indicators compared to the manufacturing industry.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method.

Science.gov (United States)

Chaharsooghi, S K; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain management and examines the problem of identifying a new model for supplier selection based on extended model of TBL approach in supply chain by presenting fuzzy multicriteria method. Linguistic values of experts' subjective preferences are expressed with fuzzy numbers and Neofuzzy TOPSIS is proposed for finding the best solution of supplier selection problem. Numerical results show that the proposed model is efficient for integrating sustainability in supplier selection problem. The importance of using complimentary aspects of sustainability and Neofuzzy TOPSIS concept in sustainable supplier selection process is shown with sensitivity analysis.

Dual-band frequency selective surface with large band separation and stable performance

Science.gov (United States)

Zhou, Hang; Qu, Shao-Bo; Peng, Wei-Dong; Lin, Bao-Qin; Wang, Jia-Fu; Ma, Hua; Zhang, Jie-Qiu; Bai, Peng; Wang, Xu-Hua; Xu, Zhuo

2012-05-01

A new technique of designing a dual-band frequency selective surface with large band separation is presented. This technique is based on a delicately designed topology of L- and Ku-band microwave filters. The two band-pass responses are generated by a capacitively-loaded square-loop frequency selective surface and an aperture-coupled frequency selective surface, respectively. A Faraday cage is located between the two frequency selective surface structures to eliminate undesired couplings. Based on this technique, a dual-band frequency selective surface with large band separation is designed, which possesses large band separation, high selectivity, and stable performance under various incident angles and different polarizations.

The performance of selected semi-empirical and DFT methods in studying C60 fullerene derivatives

Science.gov (United States)

Sikorska, Celina; Puzyn, Tomasz

2015-11-01

The capability of reproducing the open circuit voltages (V oc) of 15 representative C60 fullerene derivatives was tested using the selected quantum mechanical methods (B3LYP, PM6, and PM7) together with the two one-electron basis sets. Certain theoretical treatments (e.g. PM6) were found to be satisfactory for preliminary estimates of the open circuit voltages (V oc), whereas the use of the B3LYP/6-31G(d) approach has been proven to assure highly accurate results. We also examined the structural similarity of 19 fullerene derivatives by employing principle component analysis (PCA). In order to express the structural features of the studied compounds we used molecular descriptors calculated with semi-empirical (PM6 and PM7) and density functional (B3LYP/6-31G(d)) methods separately. In performing PCA, we noticed that semi-empirical methods (i.e. PM6 and PM7) seem satisfactory for molecules, in which one can distinguish the aromatic and the aliphatic parts in the cyclopropane ring of PCBM (phenyl-C61-buteric acid methyl ester) and they significantly overestimate the energy of the highest occupied molecular orbital (E HOMO). The use of the B3LYP functional, however, is recommended for studying methanofullerenes, which closely resemble the structure of PCBM, and for their modifications.

The performance of selected semi-empirical and DFT methods in studying C60 fullerene derivatives

International Nuclear Information System (INIS)

Sikorska, Celina; Puzyn, Tomasz

2015-01-01

The capability of reproducing the open circuit voltages (V oc ) of 15 representative C 60 fullerene derivatives was tested using the selected quantum mechanical methods (B3LYP, PM6, and PM7) together with the two one-electron basis sets. Certain theoretical treatments (e.g. PM6) were found to be satisfactory for preliminary estimates of the open circuit voltages (V oc ), whereas the use of the B3LYP/6-31G(d) approach has been proven to assure highly accurate results. We also examined the structural similarity of 19 fullerene derivatives by employing principle component analysis (PCA). In order to express the structural features of the studied compounds we used molecular descriptors calculated with semi-empirical (PM6 and PM7) and density functional (B3LYP/6-31G(d)) methods separately. In performing PCA, we noticed that semi-empirical methods (i.e. PM6 and PM7) seem satisfactory for molecules, in which one can distinguish the aromatic and the aliphatic parts in the cyclopropane ring of PCBM (phenyl-C 61 -buteric acid methyl ester) and they significantly overestimate the energy of the highest occupied molecular orbital (E HOMO ). The use of the B3LYP functional, however, is recommended for studying methanofullerenes, which closely resemble the structure of PCBM, and for their modifications. (paper)

The performance of selected semi-empirical and DFT methods in studying C₆₀ fullerene derivatives.

Science.gov (United States)

Sikorska, Celina; Puzyn, Tomasz

2015-11-13

The capability of reproducing the open circuit voltages (V(oc)) of 15 representative C60 fullerene derivatives was tested using the selected quantum mechanical methods (B3LYP, PM6, and PM7) together with the two one-electron basis sets. Certain theoretical treatments (e.g. PM6) were found to be satisfactory for preliminary estimates of the open circuit voltages (V(oc)), whereas the use of the B3LYP/6-31G(d) approach has been proven to assure highly accurate results. We also examined the structural similarity of 19 fullerene derivatives by employing principle component analysis (PCA). In order to express the structural features of the studied compounds we used molecular descriptors calculated with semi-empirical (PM6 and PM7) and density functional (B3LYP/6-31G(d)) methods separately. In performing PCA, we noticed that semi-empirical methods (i.e. PM6 and PM7) seem satisfactory for molecules, in which one can distinguish the aromatic and the aliphatic parts in the cyclopropane ring of PCBM (phenyl-C61-buteric acid methyl ester) and they significantly overestimate the energy of the highest occupied molecular orbital (E(HOMO)). The use of the B3LYP functional, however, is recommended for studying methanofullerenes, which closely resemble the structure of PCBM, and for their modifications.

A Comparative Study of Feature Selection and Classification Methods for Gene Expression Data

KAUST Repository

Abusamra, Heba

2013-05-01

Microarray technology has enriched the study of gene expression in such a way that scientists are now able to measure the expression levels of thousands of genes in a single experiment. Microarray gene expression data gained great importance in recent years due to its role in disease diagnoses and prognoses which help to choose the appropriate treatment plan for patients. This technology has shifted a new era in molecular classification, interpreting gene expression data remains a difficult problem and an active research area due to their native nature of “high dimensional low sample size”. Such problems pose great challenges to existing classification methods. Thus, effective feature selection techniques are often needed in this case to aid to correctly classify different tumor types and consequently lead to a better understanding of genetic signatures as well as improve treatment strategies. This thesis aims on a comparative study of state-of-the-art feature selection methods, classification methods, and the combination of them, based on gene expression data. We compared the efficiency of three different classification methods including: support vector machines, k- nearest neighbor and random forest, and eight different feature selection methods, including: information gain, twoing rule, sum minority, max minority, gini index, sum of variances, t- statistics, and one-dimension support vector machine. Five-fold cross validation was used to evaluate the classification performance. Two publicly available gene expression data sets of glioma were used for this study. Different experiments have been applied to compare the performance of the classification methods with and without performing feature selection. Results revealed the important role of feature selection in classifying gene expression data. By performing feature selection, the classification accuracy can be significantly boosted by using a small number of genes. The relationship of features selected in

LPTA versus Tradeoff: Analysis of Contract Source Selection Strategies and Performance Outcomes

Science.gov (United States)

2016-06-15

7 - Naval Postgraduate School source selection strategies to be made on a best value basis and not the lowest price ” (Office of...cost is an evaluation factor in all procurements, regardless of the source selection strategy chosen. In evaluating cost or price , FAR...contract performance is minimal, cost or price may play a dominant role in source selection. The less definitive the requirement, the more

ASYMMETRIC PRICE TRANSMISSION MODELING: THE IMPORTANCE OF MODEL COMPLEXITY AND THE PERFORMANCE OF THE SELECTION CRITERIA

Directory of Open Access Journals (Sweden)

Henry de-Graft Acquah

2013-01-01

Full Text Available Information Criteria provides an attractive basis for selecting the best model from a set of competing asymmetric price transmission models or theories. However, little is understood about the sensitivity of the model selection methods to model complexity. This study therefore fits competing asymmetric price transmission models that differ in complexity to simulated data and evaluates the ability of the model selection methods to recover the true model. The results of Monte Carlo experimentation suggest that in general BIC, CAIC and DIC were superior to AIC when the true data generating process was the standard error correction model, whereas AIC was more successful when the true model was the complex error correction model. It is also shown that the model selection methods performed better in large samples for a complex asymmetric data generating process than with a standard asymmetric data generating process. Except for complex models, AIC's performance did not make substantial gains in recovery rates as sample size increased. The research findings demonstrate the influence of model complexity in asymmetric price transmission model comparison and selection.

Corporate Diversification and Firm Performance: an Empirical Study

Directory of Open Access Journals (Sweden)

Olu Ojo

2009-05-01

Full Text Available The importance of diversification and performance in then strategic management literature is widely accepted among academics and practitioners . However, the proxies for performance and diversification that have been employed in past strategy research has not been unanimously agreed upon. Given the current state of confusion that exists with regard to the impact of corporate diversification on firm performance in selected Nigerian companies. The reason for increased interest in diversification has always been on the possibility that diversification is related to corporate performance. However , while this topic is rich in studies, empirical evidence semerging from various studies about the effect of diversification on performance have so far yield mixed results that are inconclusive and contradictory. In addition , despite the existence of these studies, very litlle attention has been given to the companies in developing countries including Nigeria. This means that there is a major gap in the relevant literature on developing countries which has to be covered by research. This research attempts to fill this gap by studying the situation of the Nigeria companies and providing more empirical evidence on the effects of corporate diversification on firm performance based on individual company-level data. Survey research design was adopted in this study with the application of simple random sampling tehnique in selecting our case study companies as well as our respondents. Primary data were collected through questionnaire. Data were analysed through descriptive statistics and correlation and coefficient of determination were used to test our hypothese. It was discovered that diversification impacted performance of these companies posivitely and we recommend that these companies should engage in geographical diversification in addition to other forms of diversification they are currently involved in for maximum performance.

Dual-band frequency selective surface with large band separation and stable performance

International Nuclear Information System (INIS)

Zhou Hang; Qu Shao-Bo; Lin Bao-Qin; Wang Jia-Fu; Ma Hua; Zhang Jie-Qiu; Peng Wei-Dong; Bai Peng; Wang Xu-Hua; Xu Zhuo

2012-01-01

A new technique of designing a dual-band frequency selective surface with large band separation is presented. This technique is based on a delicately designed topology of L- and Ku-band microwave filters. The two band-pass responses are generated by a capacitively-loaded square-loop frequency selective surface and an aperture-coupled frequency selective surface, respectively. A Faraday cage is located between the two frequency selective surface structures to eliminate undesired couplings. Based on this technique, a dual-band frequency selective surface with large band separation is designed, which possesses large band separation, high selectivity, and stable performance under various incident angles and different polarizations. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

Nuclear power plant site selection: a case study

International Nuclear Information System (INIS)

Lugasi, Y.; Mehrez, A.; Sinuany-Stern, Z.

1985-01-01

Selecting the site for a nuclear power plant involves the evaluation of numerous criteria and the professional judgment of various experts. The Israel Atomic Energy Commission has been concerned with the problem of selecting a site for a nuclear power station. Previous studies have been performed by the commission to identify potential sites. There were initial screenings where potential sites were chosen according to various minimal criteria and international standards. Only sites that met all the criteria were chosen. A study was made to find the most preferred site among the potential sites that met all the criteria. Two mathematical approaches were used: Keeney's multiattribute utility function and Saaty's eigenvalue prioritization technique. Both models ranked the same site as the most desirable; however, the models differed in their ranking of the other sites

Differences in Gender Performance on Competitive Physics Selection Tests

Science.gov (United States)

Wilson, Kate; Low, David; Verdon, Matthew; Verdon, Alix

2016-01-01

We have investigated gender differences in performance over the past eight years on the Australian Science Olympiad Exam (ASOE) for physics,which is taken by nearly 1000 high school students each year. The ASOE, run by Australian Science Innovations (ASI), is the initial stage of the process of selection of teams to represent Australia at the…

Processes in arithmetic strategy selection: A fMRI study.

Directory of Open Access Journals (Sweden)

Julien eTaillan

2015-02-01

Full Text Available This neuroimaging (fMRI study investigated neural correlates of strategy selection. Young adults performed an arithmetic task in two different conditions. In both conditions, participants had to provide estimates of two-digit multiplication problems like 54 x 78. In the choice condition, participants had to select the better of two available rounding strategies, rounding-up strategy (RU (i.e., doing 60x80 = 4,800 or rounding-down strategy (RD (i.e., doing 50x70=3,500 to estimate product of 54x78. In the no-choice condition, participants did not have to select strategy on each problem but were told which strategy to use; they executed RU and RD strategies each on a series of problems. Participants also had a control task (i.e., providing correct products of multiplication problems like 40x50. Brain activations and performance were analyzed as a function of these conditions. Participants were able to frequently choose the better strategy in the choice condition; they were also slower when they executed the difficult RU than the easier RD. Neuroimaging data showed greater brain activations in right anterior cingulate cortex (ACC, dorso-lateral prefrontal cortex (DLPFC, and angular gyrus (ANG, when selecting (relative to executing the better strategy on each problem. Moreover, RU was associated with more parietal cortex activation than RD. These results suggest an important role of fronto-parietal network in strategy selection and have important implications for our further understanding and modelling cognitive processes underlying strategy selection.

Processes in arithmetic strategy selection: a fMRI study.

Science.gov (United States)

Taillan, Julien; Ardiale, Eléonore; Anton, Jean-Luc; Nazarian, Bruno; Félician, Olivier; Lemaire, Patrick

2015-01-01

This neuroimaging (functional magnetic resonance imaging) study investigated neural correlates of strategy selection. Young adults performed an arithmetic task in two different conditions. In both conditions, participants had to provide estimates of two-digit multiplication problems like 54 × 78. In the choice condition, participants had to select the better of two available rounding strategies, rounding-up (RU) strategy (i.e., doing 60 × 80 = 4,800) or rounding-down (RD) strategy (i.e., doing 50 × 70 = 3,500 to estimate product of 54 × 78). In the no-choice condition, participants did not have to select strategy on each problem but were told which strategy to use; they executed RU and RD strategies each on a series of problems. Participants also had a control task (i.e., providing correct products of multiplication problems like 40 × 50). Brain activations and performance were analyzed as a function of these conditions. Participants were able to frequently choose the better strategy in the choice condition; they were also slower when they executed the difficult RU than the easier RD. Neuroimaging data showed greater brain activations in right anterior cingulate cortex (ACC), dorso-lateral prefrontal cortex (DLPFC), and angular gyrus (ANG), when selecting (relative to executing) the better strategy on each problem. Moreover, RU was associated with more parietal cortex activation than RD. These results suggest an important role of fronto-parietal network in strategy selection and have important implications for our further understanding and modeling cognitive processes underlying strategy selection.

Effects of Information Visualization on Older Adults' Decision-Making Performance in a Medicare Plan Selection Task: A Comparative Usability Study.

Science.gov (United States)

Price, Margaux M; Crumley-Branyon, Jessica J; Leidheiser, William R; Pak, Richard

2016-06-01

Technology gains have improved tools for evaluating complex tasks by providing environmental supports (ES) that increase ease of use and improve performance outcomes through the use of information visualizations (info-vis). Complex info-vis emphasize the need to understand individual differences in abilities of target users, the key cognitive abilities needed to execute a decision task, and the graphical elements that can serve as the most effective ES. Older adults may be one such target user group that would benefit from increased ES to mitigate specific declines in cognitive abilities. For example, choosing a prescription drug plan is a necessary and complex task that can impact quality of life if the wrong choice is made. The decision to enroll in one plan over another can involve comparing over 15 plans across many categories. Within this context, the large amount of complex information and reduced working memory capacity puts older adults' decision making at a disadvantage. An intentionally designed ES, such as an info-vis that reduces working memory demand, may assist older adults in making the most effective decision among many options. The objective of this study is to examine whether the use of an info-vis can lower working memory demands and positively affect complex decision-making performance of older adults in the context of choosing a Medicare prescription drug plan. Participants performed a computerized decision-making task in the context of finding the best health care plan. Data included quantitative decision-making performance indicators and surveys examining previous history with purchasing insurance. Participants used a colored info-vis ES or a table (no ES) to perform the decision task. Task difficulty was manipulated by increasing the number of selection criteria used to make an accurate decision. A repeated measures analysis was performed to examine differences between the two table designs. Twenty-three older adults between the ages of 66

Selection for beef traits and calving performance in Piemontese cattle

NARCIS (Netherlands)

Albera, A.

2006-01-01

Beef cattle selection programmes are usually focused on the improvement of production traits. However, also functional traits play an important role for the efficiency of animal production. Among these traits calving performance, affecting stillbirth of calves, fertility of cows, animal welfare and

SON for LTE-WLAN access network selection : design and performance

NARCIS (Netherlands)

Willemen, P.; Laselva, D.; Wang, Y.; Kovács, I.; Djapic, R.; Moerman, I.

2016-01-01

Mobile network operators (MNOs) are deploying carrier-grade Wireless Local Area Network (WLAN) as an important complementary system to cellular networks. Access network selection (ANS) between cellular and WLAN is an essential component to improve network performance and user quality-of-service

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

Performance Studies for Electron and Photon Selection at the Event Filter

CERN Document Server

Mommsen, R K; Wielers, M

2000-01-01

In this note the electron and photon selection potential of the event filter is studied. The offline software suite ATRECON is used to investigate the rejection power achievable within the stringent constraints in an online environment. We used the electro-magnetic calorimeter reconstruction, the xKalman and iPatRec pattern recognition packages, and for photon conversion finding xConver/xHouRec. The interplay between efficiency/rejection and the execution time of the algorithms is investigated for electrons and photons both at low and high luminosity. A total efficiency of about 75(73)% for single electrons with Pt=20(30)GeV at a dijet rate of ~40(130)Hz at low (high) luminosity can be retained while reducing the median reconstruction time by a factor of ~3(10) with simple reconfigurations of ATRECON.Additional, the long tails seen in the reconstruction time distribution at the default settings are reduced significantly.

Frequency selective surfaces based high performance microstrip antenna

CERN Document Server

Narayan, Shiv; Jha, Rakesh Mohan

2016-01-01

This book focuses on performance enhancement of printed antennas using frequency selective surfaces (FSS) technology. The growing demand of stealth technology in strategic areas requires high-performance low-RCS (radar cross section) antennas. Such requirements may be accomplished by incorporating FSS into the antenna structure either in its ground plane or as the superstrate, due to the filter characteristics of FSS structure. In view of this, a novel approach based on FSS technology is presented in this book to enhance the performance of printed antennas including out-of-band structural RCS reduction. In this endeavor, the EM design of microstrip patch antennas (MPA) loaded with FSS-based (i) high impedance surface (HIS) ground plane, and (ii) the superstrates are discussed in detail. The EM analysis of proposed FSS-based antenna structures have been carried out using transmission line analogy, in combination with the reciprocity theorem. Further, various types of novel FSS structures are considered in desi...

Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

DEFF Research Database (Denmark)

Feibert, Diana Cordes; Jacobsen, Peter

2015-01-01

quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare......Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... logistics. A set of decision indicators was identified in the case study to assess technologies based on expected process performance. Two aspects of performance measurement were investigated for the hospital cleaning process: what to measure and how to measure it....

The predictive validity of a situational judgement test, a clinical problem solving test and the core medical training selection methods for performance in specialty training .

Science.gov (United States)

Patterson, Fiona; Lopes, Safiatu; Harding, Stephen; Vaux, Emma; Berkin, Liz; Black, David

2017-02-01

The aim of this study was to follow up a sample of physicians who began core medical training (CMT) in 2009. This paper examines the long-term validity of CMT and GP selection methods in predicting performance in the Membership of Royal College of Physicians (MRCP(UK)) examinations. We performed a longitudinal study, examining the extent to which the GP and CMT selection methods (T1) predict performance in the MRCP(UK) examinations (T2). A total of 2,569 applicants from 2008-09 who completed CMT and GP selection methods were included in the study. Looking at MRCP(UK) part 1, part 2 written and PACES scores, both CMT and GP selection methods show evidence of predictive validity for the outcome variables, and hierarchical regressions show the GP methods add significant value to the CMT selection process. CMT selection methods predict performance in important outcomes and have good evidence of validity; the GP methods may have an additional role alongside the CMT selection methods. © Royal College of Physicians 2017. All rights reserved.

Diminished performance on response-selection tasks in type-2 diabetes

NARCIS (Netherlands)

H.A. Keizer; P.C. Groot; J.J. Adam; dr. Lars B. Borghouts

2003-01-01

Comparisons of visual perception, response-selection, and response-execution performance were made between Type 2 diabetes mellitus patients and a matched nondiabetic control group. 10 well-controlled male patients with Type 2 diabetes without diabetic complications (M age 58 yr.) and an age and

Multi-criteria selection of offshore wind farms: Case study for the Baltic States

International Nuclear Information System (INIS)

Chaouachi, Aymen; Covrig, Catalin Felix; Ardelean, Mircea

2017-01-01

This paper presents a multi-criteria selection approach for offshore wind sites assessment. The proposed site selection framework takes into consideration the electricity network’s operating security aspects, economic investment, operation costs and capacity performances relative to each potential site. The selection decision is made through Analytic Hierarchy Process (AHP), with an inherited flexibility that aims to allow end users to adjust the expected benefits accordingly to their respective and global priorities. The proposed site selection framework is implemented as an interactive case study for three Baltic States in the 2020 time horizon, based on real data and exhaustive power network models, taking into consideration the foreseen upgrades and network reinforcements. For each country the optimal offshore wind sites are assessed under multiple weight contribution scenarios, reflecting the characteristics of market design, regulatory aspects or renewable integration targets. - Highlights: • We use a multi-criteria selection approach for offshore wind sites assessment. • Security aspects, economic investment, operation costs and capacity performances are included. • The selection decision is made through an Analytic Hierarchy Process (AHP). • We implement the methodology as a case study for three Baltic States in the 2020 time horizon.

Surgery resident selection and evaluation. A critical incident study.

Science.gov (United States)

Edwards, J C; Currie, M L; Wade, T P; Kaminski, D L

1993-03-01

This article reports a study of the process of selecting and evaluating general surgery residents. In personnel psychology terms, a job analysis of general surgery was conducted using the Critical Incident Technique (CIT). The researchers collected 235 critical incidents through structured interviews with 10 general surgery faculty members and four senior residents. The researchers then directed the surgeons in a two-step process of sorting the incidents into categories and naming the categories. The final essential categories of behavior to define surgical competence were derived through discussion among the surgeons until a consensus was formed. Those categories are knowledge/self-education, clinical performance, diagnostic skills, surgical skills, communication skills, reliability, integrity, compassion, organization skills, motivation, emotional control, and personal appearance. These categories were then used to develop an interview evaluation form for selection purposes and a performance evaluation form to be used throughout residency training. Thus a continuum of evaluation was established. The categories and critical incidents were also used to structure the interview process, which has demonstrated increased interview validity and reliability in many other studies. A handbook for structuring the interviews faculty members conduct with applicants was written, and an interview training session was held with the faculty. The process of implementation of the structured selection interviews is being documented currently through qualitative research.

Outage Performance Analysis of Relay Selection Schemes in Wireless Energy Harvesting Cooperative Networks over Non-Identical Rayleigh Fading Channels.

Science.gov (United States)

Do, Nhu Tri; Bao, Vo Nguyen Quoc; An, Beongku

2016-02-26

In this paper, we study relay selection in decode-and-forward wireless energy harvesting cooperative networks. In contrast to conventional cooperative networks, the relays harvest energy from the source's radio-frequency radiation and then use that energy to forward the source information. Considering power splitting receiver architecture used at relays to harvest energy, we are concerned with the performance of two popular relay selection schemes, namely, partial relay selection (PRS) scheme and optimal relay selection (ORS) scheme. In particular, we analyze the system performance in terms of outage probability (OP) over independent and non-identical (i.n.i.d.) Rayleigh fading channels. We derive the closed-form approximations for the system outage probabilities of both schemes and validate the analysis by the Monte-Carlo simulation. The numerical results provide comprehensive performance comparison between the PRS and ORS schemes and reveal the effect of wireless energy harvesting on the outage performances of both schemes. Additionally, we also show the advantages and drawbacks of the wireless energy harvesting cooperative networks and compare to the conventional cooperative networks.

KPI (KEY PERFORMANCE INDICATORS APPLICATION ON BALLAST WATER TREATMENT SYSTEM SELECTION

Directory of Open Access Journals (Sweden)

Gülçin Vural

2017-01-01

Full Text Available Every day, more than 7,000 different marine species are transferred to different ecosystems via ballast water in ships. The introduction of invasive species can cause problems for native species. After realizing the serious potential problems associated with the transport of organisms in ballast water, national and international regulations were developed. In 2004, the International Maritime Organization introduced the International Convention for the Control and Management of Ships' Ballast Water and Sediments. With these regulations, the problems caused by ballast water have attracted attention and many companies have started to research and develop technologies for the management of ballast water. Today, there are hundreds of different systems for ballast-water treatment, and the selection of the most suitable system for a specific vessel is an increasingly important issue as the Convention nears enforcement on September 8, 2017. The goal of this study is to demonstrate that the application of key performance indicators (KPIs to the selection of a ballast-water treatment system (BWTS leads to a very useful tool with which shipyards can compare BWTSs. This allows them to make better choices and to designate the most suitable system for each of their ships. In this study, we examine two types of vessel from a shipyard in Istanbul, Turkey. They have different ballast-water capacities and equipment, and the most suitable system for each is selected by using the KPI method.

Optimal Tuner Selection for Kalman-Filter-Based Aircraft Engine Performance Estimation

Science.gov (United States)

Simon, Donald L.; Garg, Sanjay

2011-01-01

An emerging approach in the field of aircraft engine controls and system health management is the inclusion of real-time, onboard models for the inflight estimation of engine performance variations. This technology, typically based on Kalman-filter concepts, enables the estimation of unmeasured engine performance parameters that can be directly utilized by controls, prognostics, and health-management applications. A challenge that complicates this practice is the fact that an aircraft engine s performance is affected by its level of degradation, generally described in terms of unmeasurable health parameters such as efficiencies and flow capacities related to each major engine module. Through Kalman-filter-based estimation techniques, the level of engine performance degradation can be estimated, given that there are at least as many sensors as health parameters to be estimated. However, in an aircraft engine, the number of sensors available is typically less than the number of health parameters, presenting an under-determined estimation problem. A common approach to address this shortcoming is to estimate a subset of the health parameters, referred to as model tuning parameters. The problem/objective is to optimally select the model tuning parameters to minimize Kalman-filterbased estimation error. A tuner selection technique has been developed that specifically addresses the under-determined estimation problem, where there are more unknown parameters than available sensor measurements. A systematic approach is applied to produce a model tuning parameter vector of appropriate dimension to enable estimation by a Kalman filter, while minimizing the estimation error in the parameters of interest. Tuning parameter selection is performed using a multi-variable iterative search routine that seeks to minimize the theoretical mean-squared estimation error of the Kalman filter. This approach can significantly reduce the error in onboard aircraft engine parameter estimation

Natural selection on thermal preference, critical thermal maxima and locomotor performance.

Science.gov (United States)

Gilbert, Anthony L; Miles, Donald B

2017-08-16

Climate change is resulting in a radical transformation of the thermal quality of habitats across the globe. Whereas species have altered their distributions to cope with changing environments, the evidence for adaptation in response to rising temperatures is limited. However, to determine the potential of adaptation in response to thermal variation, we need estimates of the magnitude and direction of natural selection on traits that are assumed to increase persistence in warmer environments. Most inferences regarding physiological adaptation are based on interspecific analyses, and those of selection on thermal traits are scarce. Here, we estimate natural selection on major thermal traits used to assess the vulnerability of ectothermic organisms to altered thermal niches. We detected significant directional selection favouring lizards with higher thermal preferences and faster sprint performance at their optimal temperature. Our analyses also revealed correlational selection between thermal preference and critical thermal maxima, where individuals that preferred warmer body temperatures with cooler critical thermal maxima were favoured by selection. Recent published estimates of heritability for thermal traits suggest that, in concert with the strong selective pressures we demonstrate here, evolutionary adaptation may promote long-term persistence of ectotherms in altered thermal environments. © 2017 The Author(s).

Leading product-related environmental performance indicators: a selection guide and database

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

Performance Evaluation of User Selection Protocols in Random Networks with Energy Harvesting and Hardware Impairments

Directory of Open Access Journals (Sweden)

Tan Nhat Nguyen

2016-01-01

Full Text Available In this paper, we evaluate performances of various user selection protocols under impact of hardware impairments. In the considered protocols, a Base Station (BS selects one of available Users (US to serve, while the remaining USs harvest the energy from the Radio Frequency (RF transmitted by the BS. We assume that all of the US randomly appear around the BS. In the Random Selection Protocol (RAN, the BS randomly selects a US to transmit the data. In the second proposed protocol, named Minimum Distance Protocol (MIND, the US that is nearest to the BS will be chosen. In the Optimal Selection Protocol (OPT, the US providing the highest channel gain between itself and the BS will be served. For performance evaluation, we derive exact and asymptotic closed-form expressions of average Outage Probability (OP over Rayleigh fading channels. We also consider average harvested energy per a US. Finally, Monte-Carlo simulations are then performed to verify the theoretical results.

Performance study for inlet installations

Science.gov (United States)

Bingaman, Donald C.

1992-01-01

A conceptual design trade study was conducted by McDonnell Aircraft Company (MCAIR) and NASA LARC PAB to determine the impact of inlet design features incorporated for reduced detectability on inlet performance, weight, and cost, for both fighter and attack-type aircraft. Quality Function Deployment (QFD) techniques were used to prioritize trade study issues, and select 'best' air induction system configurations for each of two notional aircraft, the Multi-Role Fighter (MRF) and the Advanced Medium Attack (AMA) bomber. Database deficiencies discovered in the trade study process were identified, and technology roadmaps were developed to address these deficiencies. Finally, two high speed inlet wind tunnel model concepts were developed for follow-on wind tunnel investigations.

Dashboard report on performance on select quality indicators to cancer care providers.

Science.gov (United States)

Stattin, Pär; Sandin, Fredrik; Sandbäck, Torsten; Damber, Jan-Erik; Franck Lissbrant, Ingela; Robinson, David; Bratt, Ola; Lambe, Mats

2016-01-01

Cancer quality registers are attracting increasing attention as important, but still underutilized sources of clinical data. To optimize the use of registers in quality assurance and improvement, data have to be rapidly collected, collated and presented as actionable, at-a-glance information to the reporting departments. This article presents a dashboard performance report on select quality indicators to cancer care providers. Ten quality indicators registered on an individual patient level in the National Prostate Cancer Register of Sweden and recommended by the National Prostate Cancer Guidelines were selected. Data reported to the National Prostate Cancer Register are uploaded within 24 h to the Information Network for Cancer Care platform. Launched in 2014, "What''s Going On, Prostate Cancer" provides rapid, at-a-glance performance feedback to care providers. The indicators include time to report to the National Prostate Cancer Register, waiting times, designated clinical nurse specialist, multidisciplinary conference, adherence to guidelines for diagnostic work-up and treatment, and documentation and outcome of treatment. For each indicator, three performance levels were defined. What's Going On, a dashboard performance report on 10 selected quality indicators to cancer care providers, provides an example of how data in cancer quality registers can be transformed into condensed, at-a-glance information to be used as actionable metrics for quality assurance and improvement.

Selecting predictors for discriminant analysis of species performance: an example from an amphibious softwater plant.

Science.gov (United States)

Vanderhaeghe, F; Smolders, A J P; Roelofs, J G M; Hoffmann, M

2012-03-01

Selecting an appropriate variable subset in linear multivariate methods is an important methodological issue for ecologists. Interest often exists in obtaining general predictive capacity or in finding causal inferences from predictor variables. Because of a lack of solid knowledge on a studied phenomenon, scientists explore predictor variables in order to find the most meaningful (i.e. discriminating) ones. As an example, we modelled the response of the amphibious softwater plant Eleocharis multicaulis using canonical discriminant function analysis. We asked how variables can be selected through comparison of several methods: univariate Pearson chi-square screening, principal components analysis (PCA) and step-wise analysis, as well as combinations of some methods. We expected PCA to perform best. The selected methods were evaluated through fit and stability of the resulting discriminant functions and through correlations between these functions and the predictor variables. The chi-square subset, at P < 0.05, followed by a step-wise sub-selection, gave the best results. In contrast to expectations, PCA performed poorly, as so did step-wise analysis. The different chi-square subset methods all yielded ecologically meaningful variables, while probable noise variables were also selected by PCA and step-wise analysis. We advise against the simple use of PCA or step-wise discriminant analysis to obtain an ecologically meaningful variable subset; the former because it does not take into account the response variable, the latter because noise variables are likely to be selected. We suggest that univariate screening techniques are a worthwhile alternative for variable selection in ecology. © 2011 German Botanical Society and The Royal Botanical Society of the Netherlands.

Principal elements of the Basalt Waste Isolation Project performance assessment studies

International Nuclear Information System (INIS)

Baca, R.G.; Wilde, R.T.

1983-12-01

In this paper, three of the principal elements of the Basalt Waste Isolation Project (BWIP) performance assessment studies are focused on: (1) development of a methodology for probabilistic risk assessment, (2) performance analyses of repository subsystems, and (3) selection and ranking of disruptive event scenarios. Other elements of the BWIP performance assessment studies are briefly outlined. 12 references, 5 figures

Contribution to the study of fluoride dosing by using a membrane selective electrode

International Nuclear Information System (INIS)

Rivas, Jean de

1972-01-01

As the method of dosing fluoride ions by precipitation with lead fluorochloride is not very satisfying, the author reports the study of a new process for the dosing of the fluorine ion by using a selective electrode. After some generalities on selective electrodes (principle, types, operation principle) and some recalls and definitions (Galvani and Volta potential, stability constants of complexes, principles of diffusion in solids), the author reports the study of the diffusion potential in glass membranes, the study of the membrane potential, and the study of the ion exchange equilibrium. He presents methods of calculation of selectivity coefficients of membrane electrodes, and the reports experiments performed in laboratory

Can Medical School Performance Predict Residency Performance? Resident Selection and Predictors of Successful Performance in Obstetrics and Gynecology

Science.gov (United States)

Stohl, Hindi E.; Hueppchen, Nancy A.; Bienstock, Jessica L.

2010-01-01

Background During the evaluation process, Residency Admissions Committees typically gather data on objective and subjective measures of a medical student's performance through the Electronic Residency Application Service, including medical school grades, standardized test scores, research achievements, nonacademic accomplishments, letters of recommendation, the dean's letter, and personal statements. Using these data to identify which medical students are likely to become successful residents in an academic residency program in obstetrics and gynecology is difficult and to date, not well studied. Objective To determine whether objective information in medical students' applications can help predict resident success. Method We performed a retrospective cohort study of all residents who matched into the Johns Hopkins University residency program in obstetrics and gynecology between 1994 and 2004 and entered the program through the National Resident Matching Program as a postgraduate year-1 resident. Residents were independently evaluated by faculty and ranked in 4 groups according to perceived level of success. Applications from residents in the highest and lowest group were abstracted. Groups were compared using the Fisher exact test and the Student t test. Results Seventy-five residents met inclusion criteria and 29 residents were ranked in the highest and lowest quartiles (15 in highest, 14 in lowest). Univariate analysis identified no variables as consistent predictors of resident success. Conclusion In a program designed to train academic obstetrician-gynecologists, objective data from medical students' applications did not correlate with successful resident performance in our obstetrics-gynecology residency program. We need to continue our search for evaluation criteria that can accurately and reliably select the medical students that are best fit for our specialty. PMID:21976076

Anthropometric analysis and performance characteristics to predict selection in young male and female handball players

Directory of Open Access Journals (Sweden)

Juan J. Fernández-Romero

Full Text Available Abstract The aim of this study was two-fold. The first aim was to determine if there were any anthropometric and physical performance differences (controlling for maturation between male and female handball players selected in training categories as well asthe relation of these differences with the performance level achieved. The second aim was to identify the discriminatory variables between the performance levels achieved. A total of 216 young handball players (125 men and 91 women participated in the study. The data were classified by selection level (regional n=154; national n=62, gender (men; women and age category (under-15; under-17. The use of MANCOVA analyses, controllingfor maturation, identified how gender could determine variables related to handball players' future competitive levels. The results revealed that anthropometric variables such as height, arm span, trochanter height, thigh girth, and leg girth were more influential in men than in women. In addition, the physical performance tests of vertical jump (squat jump and counter movement jump with/without arm and 10x5m shuttle run were determinants in both sexes. Discriminatory analysis predicted that a combination of five variables (counter movement jump with arm, body mass, 10x5m shuttle run, dominant hand length and trochanter height would successfully distinguish between regional and national players, with a predictive accuracy of 81.9% for all players.

Performance of Africanized honeybee colonies settled by queens selected for different traits

Directory of Open Access Journals (Sweden)

Tânia Patrícia Schafaschek

2016-01-01

Full Text Available We evaluated varroa infestation and the performance of Africanized honeybee colonies with queens selected for honey and royal jelly production, and also unselected queens, correlating with climatic variables. In Campo Alegre, Santa Catarina State, Brazil, the experiment I used 10 Langstroth hives and in Mafra, Santa Catarina State, Brazil, the experiment II was performed with 15 Schenk hives. A mapping in areas of sealed and unsealed brood, honey and pollen was carried out on days zero, 45 and 90 days after the introduction of the queen. In the experiment I, there was interaction between the type of queen selection and the evaluation period for areas of sealed brood, honey, and total stored food. The group selected for royal jelly production presented larger sealed brood area and smaller honey area at 90 days. Varroa infestation was lower (p < 0.05 at 90 days. The type of queen selection and the evaluation period influenced the sealed brood area, the total brood and the total area occupied in the colony. The high relative humidity caused greater honey storage for the local group. The different groups of queens presented different behavior according to the environment in which they are settled.

Measure Guideline. Energy-Efficient Window Performance and Selection

Energy Technology Data Exchange (ETDEWEB)

Carmody, John [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR; Haglund, Kerry [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR

2012-11-01

This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all U.S. climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The report also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well.

Instance Selection for Classifier Performance Estimation in Meta Learning

OpenAIRE

Marcin Blachnik

2017-01-01

Building an accurate prediction model is challenging and requires appropriate model selection. This process is very time consuming but can be accelerated with meta-learning–automatic model recommendation by estimating the performances of given prediction models without training them. Meta-learning utilizes metadata extracted from the dataset to effectively estimate the accuracy of the model in question. To achieve that goal, metadata descriptors must be gathered efficiently and must be inform...

A Comparative Study of Feature Selection and Classification Methods for Gene Expression Data

KAUST Repository

Abusamra, Heba

2013-01-01

Different experiments have been applied to compare the performance of the classification methods with and without performing feature selection. Results revealed the important role of feature selection in classifying gene expression data. By performing feature selection, the classification accuracy can be significantly boosted by using a small number of genes. The relationship of features selected in different feature selection methods is investigated and the most frequent features selected in each fold among all methods for both datasets are evaluated.

Host selection by the pine processionary moth enhances larval performance: An experiment

Science.gov (United States)

Pérez-Contreras, Tomás; Soler, Juan J.; Soler, Manuel

2014-02-01

The development of a phytophagous insect depends on the nutritional characteristics of plants on which it feeds. Offspring from different females, however, may vary in their ability to develop in different host species and therefore females should place their eggs on host plants that result in the highest performance for the insect offspring. Causes underlying the predicted relationships between host selection and offspring performance may be: (1) a genetic association between larval ability to exploit particular hosts and the female insect's host preference; and (2) phenotypic plasticity of larvae that may be due to (a) maternal effects (e.g. differential investment in eggs) or (b) diet. In this work, we analyse the performance (i.e. hatching success and larval size and mortality) of the pine processionary (Thaumetopoea pityocampa) caterpillar developing in Aleppo (Pinus halepensis) or maritime (Pinus pinaster) pines. Larvae of this moth species do not move from the individual pine selected by the mother for oviposition. By means of cross-fostering experiments of eggs batches and silk nests of larvae between these two pine species, we explored whether phenotypic plasticity of offspring traits or genetic correlations between mother and offspring traits account for variation in developmental characteristics of caterpillars. Our results showed that females preferentially selected Aleppo pine for oviposition. Moreover, the offspring had the highest probability of survival and reached a larger body size in this pine species independently of whether or not batches were experimentally cross-fostered. Notably, the interaction between identity of donor and receiver pine species of larvae nests explained a significant proportion of variance of larval size and mortality, suggesting a role of diet-induced phenotypic plasticity of the hatchlings. These results suggest that both female selection of the more appropriate pine species and phenotypic plasticity of larva explain the

[The practice of systematic reviews. II. Searching and selection of studies

DEFF Research Database (Denmark)

Assendelft, W J; van Tulder, M W; Scholten, R J

1999-01-01

can be performed in trial registers and printed indexes and by correspondence with experts and hand searching of journals. Storage of the search results in a bibliographic database is recommended. Various methodological problems may play a role in searching and selecting studies for a review: studies......Structured searching and selection of studies is an important component of a systematic review. It is recommended to record the various steps in a protocol in advance. The thoroughness of the searching and selection will partially depend on the available resources, like manpower and funds. A search...... action should be based on an unequivocally formulated research or clinical question, that is operationalized into clear inclusion and exclusion criteria. The actual start of a search strategy is a search in preferably multiple databases like Medline and EMBASE-Excerpta Medica. Additional search actions...

Is selective attention the basis for selective imitation in infants? An eye-tracking study of deferred imitation with 12-month-olds.

Science.gov (United States)

Kolling, Thorsten; Oturai, Gabriella; Knopf, Monika

2014-08-01

Infants and children do not blindly copy every action they observe during imitation tasks. Research demonstrated that infants are efficient selective imitators. The impact of selective perceptual processes (selective attention) for selective deferred imitation, however, is still poorly described. The current study, therefore, analyzed 12-month-old infants' looking behavior during demonstration of two types of target actions: arbitrary versus functional actions. A fully automated remote eye tracker was used to assess infants' looking behavior during action demonstration. After a 30-min delay, infants' deferred imitation performance was assessed. Next to replicating a memory effect, results demonstrate that infants do imitate significantly more functional actions than arbitrary actions (functionality effect). Eye-tracking data show that whereas infants do not fixate significantly longer on functional actions than on arbitrary actions, amount of fixations and amount of saccades differ between functional and arbitrary actions, indicating different encoding mechanisms. In addition, item-level findings differ from overall findings, indicating that perceptual and conceptual item features influence looking behavior. Looking behavior on both the overall and item levels, however, does not relate to deferred imitation performance. Taken together, the findings demonstrate that, on the one hand, selective imitation is not explainable merely by selective attention processes. On the other hand, notwithstanding this reasoning, attention processes on the item level are important for encoding processes during target action demonstration. Limitations and future studies are discussed. Copyright © 2014 Elsevier Inc. All rights reserved.

Choosing a Surgeon: An Exploratory Study of Factors Influencing Selection of a Gender Affirmation Surgeon.

Science.gov (United States)

Ettner, Randi; Ettner, Frederic; White, Tonya

2016-01-01

Purpose: Selecting a healthcare provider is often a complicated process. Many factors appear to govern the decision as to how to select the provider in the patient-provider relationship. While the possibility of changing primary care physicians or specialists exists, decisions regarding surgeons are immutable once surgery has been performed. This study is an attempt to assess the importance attached to various factors involved in selecting a surgeon to perform gender affirmation surgery (GAS). It was hypothesized that owing to the intimate nature of the surgery, the expense typically involved, the emotional meaning attached to the surgery, and other variables, decisions regarding choice of surgeon for this procedure would involve factors other than those that inform more typical healthcare provider selection or surgeon selection for other plastic/reconstructive procedures. Methods: Questionnaires were distributed to individuals who had undergone GAS and individuals who had undergone elective plastic surgery to assess decision-making. Results: The results generally confirm previous findings regarding how patients select providers. Conclusion: Choosing a surgeon to perform gender-affirming surgery is a challenging process, but patients are quite rational in their decision-making. Unlike prior studies, we did not find a preference for gender-concordant surgeons, even though the surgery involves the genital area. Providing strategies and resources for surgical selection can improve patient satisfaction.

Outage Performance Analysis of Relay Selection Schemes in Wireless Energy Harvesting Cooperative Networks over Non-Identical Rayleigh Fading Channels †

Science.gov (United States)

Do, Nhu Tri; Bao, Vo Nguyen Quoc; An, Beongku

2016-01-01

In this paper, we study relay selection in decode-and-forward wireless energy harvesting cooperative networks. In contrast to conventional cooperative networks, the relays harvest energy from the source’s radio-frequency radiation and then use that energy to forward the source information. Considering power splitting receiver architecture used at relays to harvest energy, we are concerned with the performance of two popular relay selection schemes, namely, partial relay selection (PRS) scheme and optimal relay selection (ORS) scheme. In particular, we analyze the system performance in terms of outage probability (OP) over independent and non-identical (i.n.i.d.) Rayleigh fading channels. We derive the closed-form approximations for the system outage probabilities of both schemes and validate the analysis by the Monte-Carlo simulation. The numerical results provide comprehensive performance comparison between the PRS and ORS schemes and reveal the effect of wireless energy harvesting on the outage performances of both schemes. Additionally, we also show the advantages and drawbacks of the wireless energy harvesting cooperative networks and compare to the conventional cooperative networks. PMID:26927119

Performance Analysis of a Threshold-Based Parallel Multiple Beam Selection Scheme for WDM FSO Systems

KAUST Repository

Nam, Sung Sik

2018-04-09

In this paper, we statistically analyze the performance of a threshold-based parallel multiple beam selection scheme for a free-space optical (FSO) based system with wavelength division multiplexing (WDM) in cases where a pointing error has occurred under independent identically distributed Gamma-Gamma fading conditions. To simplify the mathematical analysis, we additionally consider Gamma turbulence conditions, which are a good approximation of Gamma-Gamma distribution. Specifically, we statistically analyze the characteristics in operation under conventional detection schemes (i.e., heterodyne detection (HD) and intensity modulation/direct detection (IM/DD) techniques) for both adaptive modulation (AM) case in addition to non-AM case (i.e., coherent/non-coherent binary modulation). Then, based on the statistically derived results, we evaluate the outage probability of a selected beam, the average spectral efficiency (ASE), the average number of selected beams (ANSB) and the average bit error rate (BER). Selected results show that we can obtain higher spectral efficiency and simultaneously reduce the potential for increasing the complexity of implementation caused by applying the selection-based beam selection scheme without considerable performance loss. Especially for the AM case, the ASE can be increased further compared to the non- AM cases. Our derived results based on the Gamma distribution as an approximation of the Gamma-Gamma distribution can be used as approximated performance measure bounds, especially, they may lead to lower bounds on the approximated considered performance measures.

Emotional intelligence and academic performance of medical undergraduates: a cross-sectional study in a selected university in Sri Lanka.

Science.gov (United States)

Wijekoon, Chandrani Nirmala; Amaratunge, Heshan; de Silva, Yashica; Senanayake, Solith; Jayawardane, Pradeepa; Senarath, Upul

2017-09-25

Emotional intelligence (EI) has been linked with academic and professional success. Such data are scarce in Sri Lanka. This study was conducted to describe the pattern of EI, to determine its predictors and to determine the effect of EI on academic performance at the final MBBS examination, in medical undergraduates of a Sri Lankan university. This is a cross-sectional study in a selected university, involving those who did final MBBS examination in 2016. Consecutive sampling was done. EI was assessed with self-administered Genos Emotional Intelligence Full Version (7 domains; 70 questions equally weighted; total score 350). Socio-demographic data were obtained using a self-administered questionnaire. Academic performance was assessed with final MBBS results in the first attempt. Of 148 eligible students 130 responded (response rate-88%); 61.5% were females; mean age was 26.3 ± 1 years. Mean total EI score was 241.5 (females-245.5, males-235.1; p = 0.045).Among different domains, mean score was highest for Emotional Self-Awareness (36.8/50) and lowest for Emotional Expression (32.6/50). Multiple linear regression analysis indicated that having good family support (p = 0.002), socializing well in university (p = 0.024) and being satisfied with facilities available for learning (p = 0.002), were independent predictors of EI. At the final MBBS examination 51.6% obtained classes, 31.5% passed the examination without classes and 16.9% got repeated. Females had better academic performance than males (p = 0.009). Mean EI of second-class upper division, second-class lower division, pass and repeat groups were 249.4, 246.6, 240.2 and 226.9, respectively (with one-way ANOVA p = 0.015). After adjusting for gender, ordinal regression analysis indicated that, total EI score was an independent predictor of final MBBS results [β-0.018 (95% CI 0.005-0.031); p = 0.006]. In the study population, both EI and academic performance were higher among

Simulation Analysis and Performance Study of CoCrMo Porous Structure Manufactured by Selective Laser Melting

Science.gov (United States)

Guoqing, Zhang; Junxin, Li; Jin, Li; Chengguang, Zhang; Zefeng, Xiao

2018-04-01

To fabricate porous implants with improved biocompatibility and mechanical properties that are matched to their application using selective laser melting (SLM), flow within the mold and compressive properties and performance of the porous structures must be comprehensively studied. Parametric modeling was used to build 3D models of octahedron and hexahedron structures. Finite element analysis was used to evaluate the mold flow and compressive properties of the parametric porous structures. A DiMetal-100 SLM molding apparatus was used to manufacture the porous structures and the results evaluated by light microscopy. The results showed that parametric modeling can produce robust models. Square structures caused higher blood cell adhesion than cylindrical structures. "Vortex" flow in square structures resulted in chaotic distribution of blood elements, whereas they were mostly distributed around the connecting parts in the cylindrical structures. No significant difference in elastic moduli or compressive strength was observed in square and cylindrical porous structures of identical characteristics. Hexahedron, square and cylindrical porous structures had the same stress-strain properties. For octahedron porous structures, cylindrical structures had higher stress-strain properties. Using these modeling and molding results, an important basis for designing and the direct manufacture of fixed biological implants is provided.

Simulation Analysis and Performance Study of CoCrMo Porous Structure Manufactured by Selective Laser Melting

Science.gov (United States)

Guoqing, Zhang; Junxin, Li; Jin, Li; Chengguang, Zhang; Zefeng, Xiao

2018-05-01

To fabricate porous implants with improved biocompatibility and mechanical properties that are matched to their application using selective laser melting (SLM), flow within the mold and compressive properties and performance of the porous structures must be comprehensively studied. Parametric modeling was used to build 3D models of octahedron and hexahedron structures. Finite element analysis was used to evaluate the mold flow and compressive properties of the parametric porous structures. A DiMetal-100 SLM molding apparatus was used to manufacture the porous structures and the results evaluated by light microscopy. The results showed that parametric modeling can produce robust models. Square structures caused higher blood cell adhesion than cylindrical structures. "Vortex" flow in square structures resulted in chaotic distribution of blood elements, whereas they were mostly distributed around the connecting parts in the cylindrical structures. No significant difference in elastic moduli or compressive strength was observed in square and cylindrical porous structures of identical characteristics. Hexahedron, square and cylindrical porous structures had the same stress-strain properties. For octahedron porous structures, cylindrical structures had higher stress-strain properties. Using these modeling and molding results, an important basis for designing and the direct manufacture of fixed biological implants is provided.

The predictive validity of selection for entry into postgraduate training in general practice: evidence from three longitudinal studies.

Science.gov (United States)

Patterson, Fiona; Lievens, Filip; Kerrin, Máire; Munro, Neil; Irish, Bill

2013-11-01

The selection methodology for UK general practice is designed to accommodate several thousand applicants per year and targets six core attributes identified in a multi-method job-analysis study To evaluate the predictive validity of selection methods for entry into postgraduate training, comprising a clinical problem-solving test, a situational judgement test, and a selection centre. A three-part longitudinal predictive validity study of selection into training for UK general practice. In sample 1, participants were junior doctors applying for training in general practice (n = 6824). In sample 2, participants were GP registrars 1 year into training (n = 196). In sample 3, participants were GP registrars sitting the licensing examination after 3 years, at the end of training (n = 2292). The outcome measures include: assessor ratings of performance in a selection centre comprising job simulation exercises (sample 1); supervisor ratings of trainee job performance 1 year into training (sample 2); and licensing examination results, including an applied knowledge examination and a 12-station clinical skills objective structured clinical examination (OSCE; sample 3). Performance ratings at selection predicted subsequent supervisor ratings of job performance 1 year later. Selection results also significantly predicted performance on both the clinical skills OSCE and applied knowledge examination for licensing at the end of training. In combination, these longitudinal findings provide good evidence of the predictive validity of the selection methods, and are the first reported for entry into postgraduate training. Results show that the best predictor of work performance and training outcomes is a combination of a clinical problem-solving test, a situational judgement test, and a selection centre. Implications for selection methods for all postgraduate specialties are considered.

Selected herbals and human exercise performance.

Science.gov (United States)

Bucci, L R

2000-08-01

Herbs have been used throughout history to enhance physical performance, but scientific scrutiny with controlled clinical trials has only recently been used to study such effects. The following herbs are currently used to enhance physical performance regardless of scientific evidence of effect: Chinese, Korean, and American ginsengs; Siberian ginseng, mahuang or Chinese ephedra; ashwagandha; rhodiola; yohimbe; CORDYCEPS: fungus, shilajit or mummio; smilax; wild oats; Muira puama; suma (ecdysterone); Tribulus terrestris; saw palmetto berries; beta-sitosterol and other related sterols; and wild yams (diosgenin). Controlled studies of Asian ginsengs found improvements in exercise performance when most of the following conditions were true: use of standardized root extracts, study duration (>8 wk, daily dose >1 g dried root or equivalent, large number of subjects, and older subjects. Improvements in muscular strength, maximal oxygen uptake, work capacity, fuel homeostasis, serum lactate, heart rate, visual and auditory reaction times, alertness, and psychomotor skills have also been repeatedly documented. Siberian ginseng has shown mixed results. Mahuang, ephedrine, and related alkaloids have not benefited physical performance except when combined with caffeine. Other herbs remain virtually untested. Future research on ergogenic effects of herbs should consider identity and amount of substance or presumed active ingredients administered, dose response, duration of test period, proper experimental controls, measurement of psychological and physiologic parameters (including antioxidant actions), and measurements of performance pertinent to intended uses.

User-friendly tools on handheld devices for observer performance study

Science.gov (United States)

Matsumoto, Takuya; Hara, Takeshi; Shiraishi, Junji; Fukuoka, Daisuke; Abe, Hiroyuki; Matsusako, Masaki; Yamada, Akira; Zhou, Xiangrong; Fujita, Hiroshi

2012-02-01

ROC studies require complex procedures to select cases from many data samples, and to set confidence levels in each selected case to generate ROC curves. In some observer performance studies, researchers have to develop software with specific graphical user interface (GUI) to obtain confidence levels from readers. Because ROC studies could be designed for various clinical situations, it is difficult task for preparing software corresponding to every ROC studies. In this work, we have developed software for recording confidence levels during observer studies on tiny personal handheld devices such as iPhone, iPod touch, and iPad. To confirm the functions of our software, three radiologists performed observer studies to detect lung nodules by using public database of chest radiograms published by Japan Society of Radiological Technology. The output in text format conformed to the format for the famous ROC kit from the University of Chicago. Times required for the reading each case was recorded very precisely.

Differences in gender performance on competitive physics selection tests

OpenAIRE

Kate Wilson; David Low; Matthew Verdon; Alix Verdon

2016-01-01

[This paper is part of the Focused Collection on Gender in Physics.] We have investigated gender differences in performance over the past eight years on the Australian Science Olympiad Exam (ASOE) for physics, which is taken by nearly 1000 high school students each year. The ASOE, run by Australian Science Innovations (ASI), is the initial stage of the process of selection of teams to represent Australia at the Asian and International Physics Olympiads. Students taking the exam are generally ...

Supplier Selection based on the Performance by using PROMETHEE Method

Science.gov (United States)

Sinaga, T. S.; Siregar, K.

2017-03-01

Generally, companies faced problem to identify vendors that can provide excellent service in availability raw material and on time delivery. The performance of suppliers in a company have to be monitored to ensure the availability to fulfill the company needs. This research is intended to explain how to assess suppliers to improve manufacturing performance. The criteria that considered in evaluating suppliers is criteria of Dickson. There are four main criteria which further split into seven sub-criteria, namely compliance with accuracy, consistency, on-time delivery, right quantity order, flexibility and negotiation, timely of order confirmation, and responsiveness. This research uses PROMETHEE methodology in assessing the supplier performances and obtaining a selected supplier as the best one that shown from the degree of alternative comparison preference between suppliers.

Resveratrol Attenuates Exercise-Induced Adaptive Responses in Rats Selectively Bred for Low Running Performance

OpenAIRE

Hart, Nikolett; Sarga, Linda; Csende, Zsolt; Koch, Lauren G.; Britton, Steven L.; Davies, Kelvin J.A.; Radak, Zsolt

2013-01-01

Low capacity runner (LCR) rats have been developed by divergent artificial selection for treadmill endurance capacity to explore an aerobic biology-disease connection. The beneficial effects of resveratrol supplementation have been demonstrated in endurance running. In this study it was examined whether 12 weeks of treadmill exercise training and/or resveratrol can retrieve the low running performance of the LCR and impact mitochondrial biogenesis and quality control. Resveratrol regressed ru...

Study of the butyl acetate synthesis - 1. Catalyst selection

Directory of Open Access Journals (Sweden)

Álvaro Orjuela Londoño

2004-01-01

Full Text Available In this work, a laboratory scale selection study over eight catalytic agents was made, in the acetic acid and butyl alcohol esterification reaction (seven lon exchange resins and a zeolytic solid. Considering some physicochemical characteristics as the activation pre-treating requirements, acidity, thermal stability, reaction performance, etc., it was found that macroporous ion exchange resins are the most efficient catalysts, especially Lewatit K-2431 resin.

The Influence of Motivation on Employees' Performance: A Study of ...

African Journals Online (AJOL)

user

motivation on employees' performance of selected manufacturing firms in Anambra State ..... Research Design: The survey research design method was used in this study. ... manager, the accountant, and the production manager). The sample.

Potential of Genomic Selection in Mass Selection Breeding of an Allogamous Crop: An Empirical Study to Increase Yield of Common Buckwheat.

Science.gov (United States)

Yabe, Shiori; Hara, Takashi; Ueno, Mariko; Enoki, Hiroyuki; Kimura, Tatsuro; Nishimura, Satoru; Yasui, Yasuo; Ohsawa, Ryo; Iwata, Hiroyoshi

2018-01-01

To evaluate the potential of genomic selection (GS), a selection experiment with GS and phenotypic selection (PS) was performed in an allogamous crop, common buckwheat ( Fagopyrum esculentum Moench). To indirectly select for seed yield per unit area, which cannot be measured on a single-plant basis, a selection index was constructed from seven agro-morphological traits measurable on a single plant basis. Over 3 years, we performed two GS and one PS cycles per year for improvement in the selection index. In GS, a prediction model was updated every year on the basis of genotypes of 14,598-50,000 markers and phenotypes. Plants grown from seeds derived from a series of generations of GS and PS populations were evaluated for the traits in the selection index and other yield-related traits. GS resulted in a 20.9% increase and PS in a 15.0% increase in the selection index in comparison with the initial population. Although the level of linkage disequilibrium in the breeding population was low, the target trait was improved with GS. Traits with higher weights in the selection index were improved more than those with lower weights, especially when prediction accuracy was high. No trait changed in an unintended direction in either GS or PS. The accuracy of genomic prediction models built in the first cycle decreased in the later cycles because the genetic bottleneck through the selection cycles changed linkage disequilibrium patterns in the breeding population. The present study emphasizes the importance of updating models in GS and demonstrates the potential of GS in mass selection of allogamous crop species, and provided a pilot example of successful application of GS to plant breeding.

Performance of Cross-Layer Design with Antenna Selection and Imperfect Feedback Information in MIMO Systems

Directory of Open Access Journals (Sweden)

Xiaoyu Dang

2012-01-01

Full Text Available By combining adaptive modulation and automatic repeat request, a cross-layer design (CLD scheme for MIMO system with antenna selection (AS and imperfect feedback is presented, and the corresponding performance is studied. Subject to a target packet loss rate and fixed power constraint, the variable switching thresholds of fading gain are derived. According to these results, and using mathematical manipulation, the average spectrum efficiency (SE and packet error rate (PER of the system are further derived. As a result, closed-form expressions of the average SE and PER are obtained, respectively. These expressions include the expressions under perfect channel state information as special cases and provide good performance evaluation for the system. Numerical results show that the proposed CLD scheme with antenna selection has higher SE than the existing CLD scheme with space-time block coding, and the CLD scheme with variable switching thresholds outperforms that with conventional-fixed switching thresholds.

Thermodynamic study of selected monoterpenes III

International Nuclear Information System (INIS)

Štejfa, Vojtěch; Fulem, Michal; Růžička, Květoslav; Červinka, Ctirad

2014-01-01

Highlights: • (−)-trans-Pinane, (+)-Δ-carene, eucalyptol, and limonene were studied. • New thermodynamic data were measured and calculated. • Many of thermodynamic data are reported for the first time. - Abstract: A thermodynamic study of selected monoterpenes, (−)-trans-pinane, (+)-Δ-carene, eucalyptol, (+)-limonene, and (−)-limonene, is presented in this work. The vapor pressure measurements were performed using the static method over the environmentally important temperature range (238 to 308) K. Liquid heat capacities were measured by Tian–Calvet calorimetry in the temperature interval (258 to 355) K. The phase behavior was investigated by differential scanning calorimetry (DSC) from T = 183 K. The thermodynamic properties in the ideal-gas state were calculated by combining statistical thermodynamic and density functional theory (DFT) calculations. Calculated ideal-gas heat capacities and experimental data for vapor pressures and condensed phase heat capacities were treated simultaneously to obtain a consistent thermodynamic description

Examining applying high performance genetic data feature selection and classification algorithms for colon cancer diagnosis.

Science.gov (United States)

Al-Rajab, Murad; Lu, Joan; Xu, Qiang

2017-07-01

This paper examines the accuracy and efficiency (time complexity) of high performance genetic data feature selection and classification algorithms for colon cancer diagnosis. The need for this research derives from the urgent and increasing need for accurate and efficient algorithms. Colon cancer is a leading cause of death worldwide, hence it is vitally important for the cancer tissues to be expertly identified and classified in a rapid and timely manner, to assure both a fast detection of the disease and to expedite the drug discovery process. In this research, a three-phase approach was proposed and implemented: Phases One and Two examined the feature selection algorithms and classification algorithms employed separately, and Phase Three examined the performance of the combination of these. It was found from Phase One that the Particle Swarm Optimization (PSO) algorithm performed best with the colon dataset as a feature selection (29 genes selected) and from Phase Two that the Support Vector Machine (SVM) algorithm outperformed other classifications, with an accuracy of almost 86%. It was also found from Phase Three that the combined use of PSO and SVM surpassed other algorithms in accuracy and performance, and was faster in terms of time analysis (94%). It is concluded that applying feature selection algorithms prior to classification algorithms results in better accuracy than when the latter are applied alone. This conclusion is important and significant to industry and society. Copyright © 2017 Elsevier B.V. All rights reserved.

Sustainable Supplier Performance Evaluation and Selection with Neofuzzy TOPSIS Method

OpenAIRE

Chaharsooghi, S. K.; Ashrafi, Mehdi

2014-01-01

Supplier selection plays an important role in the supply chain management and traditional criteria such as price, quality, and flexibility are considered for supplier performance evaluation in researches. In recent years sustainability has received more attention in the supply chain management literature with triple bottom line (TBL) describing the sustainability in supply chain management with social, environmental, and economic initiatives. This paper explores sustainability in supply chain...

Selection of a high performance alloy for gas turbine blade using finite element methods

International Nuclear Information System (INIS)

Khawaja, H.A.; Khan, A.M.; Ali, S.T.

2007-01-01

With the extensive increase in the utilization of energy resources in the modern era, the need of energy extraction from various resources has pronounced in recent years. Thus comprehensive efforts have been made around the globe in the technological development of turbo machines where means of energy extraction is energized fluids. This development led the eviation industry to power boost due to better performing engines. Meanwhile, the structural conformability requirements relative to the functional requirements have also increased with the advent of newer, better performing materials. Thus there is a need to study the material behavior and its usage with the idea of selecting the best possible material for its application. In this work a gas turbine blade of a small turbofan engine, where geometry and aerodynamic data was available, was analyzed for its structural behavior in the proposed mission envelope, where the engine turbine is subjected to high thermal, inertial and aerodynamic loads. FE linear stress analysis was carried out on the turbine blade. The results revealed the upper limit of UTS for the blade. Based on the limiting factor, high performance alloys were selected from the literature. The two most recommended alloy categories for gas turbine blades are NIMONIC and INCONEL from where total of 21 types of INCONEL alloys and 12 of NIMONIC alloys, available on on commercial bases, were analyzed individually to meet the INCONEL alloys for further analysis. On the basis of stress-strain behavior of finalized alloys, the FE restriction of UFOS of 1.33 and yield strength. Final selection is made keeping in view other factors like manufacturability and workability in due consideration. (author)

Predictive power of Brazilian equity fund performance using R2 as a measure of selectivity

Directory of Open Access Journals (Sweden)

Marcelo dos Santos Guzella

2017-03-01

Full Text Available ABSTRACT This paper aimed to investigate the impact of levels of selectivity on the performance of equity funds using a methodology applied for the first time ever (as far as we know in the Brazilian market. As an indicator of the activity level of a fund, we proposed the coefficient of determination (R2 of the regression of its returns over market returns. In total, 867 funds were analyzed in the period between November 2004 and October 2014. The hypothesis tested is that more selective funds perform better to compensate for their higher operating costs. This hypothesis was confirmed in the Brazilian market. Dynamic equally-weighted portfolios of funds were simulated, according to their past R2 and alphas, with monthly rebalancing and 12-month moving windows. The portfolio of the most selective funds had a Sharpe ratio of 0.0494, on a monthly basis, while the portfolio of the least selective funds had a Sharpe ratio of -0.0314. Performance was also higher in evaluations involving excess returns, Jensen’s alpha, and accumulated returns, as well as when compared to randomly selected portfolios. Moreover, past performance (as measured by Jensen’s alpha was also a predictor of future performance. Particularly, the portfolio composed by funds with a higher past alpha and lower past R2 presented a Sharpe ratio of 0.1483 and a Jensen’s alpha of 0.87% (significant at 1%, while the one composed of funds with a lower past alpha and lower activity level presented a Sharpe ratio of -0.0673 and an alpha of -0.32% (also significant at 1%.

Adaptive rate selection scheme for video transmission to resolve IEEE 802.11 performance anomaly

Science.gov (United States)

Tang, Guijin; Zhu, Xiuchang

2011-10-01

Multi-rate transmission may lead to performance anomaly in an IEEE 802.11 network. It will decrease the throughputs of all the higher rate stations. This paper proposes an adaptive rate selection scheme for video service when performance anomaly occurs. Considering that video has the characteristic of tolerance to packet loss, we actively drop several packets so as to select the rates as high as possible for transmitting packets. Experiment shows our algorithm can decrease the delay and jitter of video, and improve the system throughput as well.

Partial QoS-Aware Opportunistic Relay Selection Over Two-Hop Channels: End-to-End Performance Under Spectrum-Sharing Requirements

KAUST Repository

Yuli Yang,

2014-10-01

In this paper, we propose a partial quality-of-service (QoS)-oriented relay selection scheme with a decode-and-forward (DF) relaying protocol, to reduce the feedback amount required for relay selection. In the proposed scheme, the activated relay is the one with the maximum signal-to-noise power ratio (SNR) in the second hop among those whose packet loss rates (PLRs) in the first hop achieve a predetermined QoS level. For the purpose of evaluating the performance of the proposed scheme, we exploit it with transmission constraints imposed on the transmit power budget and interference to other users. By analyzing the statistics of received SNRs in the first and second hops, we obtain the end-to-end PLR of this scheme in closed form under the considered scenario. Moreover, to compare the proposed scheme with popular relay selection schemes, we also derive the closed-form PLR expressions for partial relay selection (PRS) and opportunistic relay selection (ORS) criteria in the same scenario under study. Illustrative numerical results demonstrate the accuracy of our derivations and substantiate that the proposed relay selection scheme is a promising alternative with respect to the tradeoff between performance and complexity.

A Qualitative Study into the Supplier Selection Decision-Making Process in the Malaysian SME Manufacturing Industry

OpenAIRE

Rahaman, F.J.

2017-01-01

In manufacturing, supplier selection is viewed as the foundation of supply chain management, as the choice of the supplier will inherently affect all other aspects of business. This study explores the supplier selection decision-making process within Malaysian manufacturing firms. Previous studies in supplier selection have focused on company performance and quality management. Preceding research in this field, offers evidence that the application of information technology tools, business int...

Diet selection and performance of horses grazing on different heathland types.

Science.gov (United States)

López López, C; Ferreira, L M M; García, U; Moreno-Gonzalo, J; Rodrigues, M A M; Osoro, K; Ferre, I; Celaya, R

2017-10-01

The number of horses in northern Spanish mountains has increased in recent decades, but little is known about their grazing behaviour, performance and potential for foal meat production. This research aimed to study the diet selection, liveweight (LW) changes and parasitic status of dry and lactating mares, and foals' LW gains, grazing on heathlands with different botanical composition. The experimental design consisted of three vegetation types: dominated by heather (Ericaceae) species (H), dominated by gorse (Ulex gallii; G) and co-dominated by gorse and heath-grasses (G-G), with four replicates per treatment (12 paddocks of 1.2 ha). The study lasted three grazing seasons (2010-12). Each year, 24 crossbred mature mares (310±52 kg LW) were used, managing one lactating mare with her foal plus one non-lactating mare per paddock from May to late summer or early autumn. In the case of H paddocks, animals had to be removed before (late August to early September) because of apparent loss of body condition. Animals were periodically weighed. Mares' diet composition was estimated using alkane markers, analysing the discrepancies in alkane concentrations between dietary plant components and faeces. Faecal samples were also analysed for gastrointestinal nematodes ova. Chemical composition of the main plant components (i.e. heather, gorse and grasses) revealed a low nutritive value, averaging 79, 115 and 113 g CP/kg dry matter (DM), respectively, that could restrict livestock performance. Mares initially selected gorse and grasses (0.47 and 0.40, respectively, in 2010), increasing heather consumption over time (from 0.13 in 2010 to 0.29 in 2012) as gorse availability decreased. The performance of both mares and foals was lower in H compared with G and G-G paddocks (-216 v. 347 g/day for mares, Phorses on gorse- and grass-gorse-dominated shrublands could be sustainable at least during part of the year (4 to 6 months). However, heather-dominated heathlands are not able to

Commitment to Study as a Technique to Improve Exam Performance.

Science.gov (United States)

Leeming, Frank C.

1997-01-01

Reports on a technique that could increase study time by reducing procrastination. Randomly selected college students (N=197) made written commitments to study for an exam. Students in the commitment condition reported significantly more study time than did students in a control group; they also performed significantly better on the exam. (RJM)

Comparison of Portfolio Selection and Performance: Shari’ah-Compliant and Socially Responsible Investment Portfolios

Directory of Open Access Journals (Sweden)

Mehmet Asutay

2015-04-01

Full Text Available This study examines the effect of Islamic screening criteria on Shari’ah-compliant portfolio selection and performance compared to Socially Responsible Investment (SRI portfolio. Each portfolio constructed from 15 stocks based on FTSE 100 using data from year 1997. Mean-variance portfolio optimization is employed with some financial ratios added as constraints for the Shari’ah portfolio. Annual expected return of each portfolio from 2008 to 2013 is used to calculate Sharpe’s ratio, Treynor ratio and Jensen’s alpha as the performance measurement tools. Macroeconomic variables are assessed using ordinary least square to examine whether they influence the portfolios’ expected returns or not. The result finds that Shari’ah portfolio has a better performance than SRI from year 2008 to 2010 shown by higher value of the measurement tools. However, from 2011 to 2013, SRI portfolio has better performance than Shari’ah portfolio. 

Improving the precision of genotype selection in wheat performance trials

Directory of Open Access Journals (Sweden)

Giovani Benin

2013-12-01

Full Text Available The aim of this study was to verify whether using the Papadakis method improves model assumptions and experimental accuracy in field trials used to determine grain yield for wheat lineages indifferent Value for Cultivation and Use (VCU regions. Grain yield data from 572 field trials at 31 locations in the VCU Regions 1, 2, 3 and 4 in 2007-2011 were used. Each trial was run with and without the use of the Papadakis method. The Papadakis method improved the indices of experimental precision measures and reduced the number of experimental repetitions required to predict grain yield performance among the wheat genotypes. There were differences among the wheat adaptation regions in terms of the efficiency of the Papadakis method, the adjustment coefficient of the genotype averages and the increases in the selective accuracy of grain yield.

Potential of Genomic Selection in Mass Selection Breeding of an Allogamous Crop: An Empirical Study to Increase Yield of Common Buckwheat

Directory of Open Access Journals (Sweden)

Shiori Yabe

2018-03-01

Full Text Available To evaluate the potential of genomic selection (GS, a selection experiment with GS and phenotypic selection (PS was performed in an allogamous crop, common buckwheat (Fagopyrum esculentum Moench. To indirectly select for seed yield per unit area, which cannot be measured on a single-plant basis, a selection index was constructed from seven agro-morphological traits measurable on a single plant basis. Over 3 years, we performed two GS and one PS cycles per year for improvement in the selection index. In GS, a prediction model was updated every year on the basis of genotypes of 14,598–50,000 markers and phenotypes. Plants grown from seeds derived from a series of generations of GS and PS populations were evaluated for the traits in the selection index and other yield-related traits. GS resulted in a 20.9% increase and PS in a 15.0% increase in the selection index in comparison with the initial population. Although the level of linkage disequilibrium in the breeding population was low, the target trait was improved with GS. Traits with higher weights in the selection index were improved more than those with lower weights, especially when prediction accuracy was high. No trait changed in an unintended direction in either GS or PS. The accuracy of genomic prediction models built in the first cycle decreased in the later cycles because the genetic bottleneck through the selection cycles changed linkage disequilibrium patterns in the breeding population. The present study emphasizes the importance of updating models in GS and demonstrates the potential of GS in mass selection of allogamous crop species, and provided a pilot example of successful application of GS to plant breeding.

Gait performance is not influenced by working memory when walking at a self-selected pace.

Science.gov (United States)

Grubaugh, Jordan; Rhea, Christopher K

2014-02-01

Gait performance exhibits patterns within the stride-to-stride variability that can be indexed using detrended fluctuation analysis (DFA). Previous work employing DFA has shown that gait patterns can be influenced by constraints, such as natural aging or disease, and they are informative regarding a person's functional ability. Many activities of daily living require concurrent performance in the cognitive and gait domains; specifically working memory is commonly engaged while walking, which is considered dual-tasking. It is unknown if taxing working memory while walking influences gait performance as assessed by DFA. This study used a dual-tasking paradigm to determine if performance decrements are observed in gait or working memory when performed concurrently. Healthy young participants (N = 16) performed a working memory task (automated operation span task) and a gait task (walking at a self-selected speed on a treadmill) in single- and dual-task conditions. A second dual-task condition (reading while walking) was included to control for visual attention, but also introduced a task that taxed working memory over the long term. All trials involving gait lasted at least 10 min. Performance in the working memory task was indexed using five dependent variables (absolute score, partial score, speed error, accuracy error, and math error), while gait performance was indexed by quantifying the mean, standard deviation, and DFA α of the stride interval time series. Two multivariate analyses of variance (one for gait and one for working memory) were used to examine performance in the single- and dual-task conditions. No differences were observed in any of the gait or working memory dependent variables as a function of task condition. The results suggest the locomotor system is adaptive enough to complete a working memory task without compromising gait performance when walking at a self-selected pace.

ITER site selection studies in Spain

International Nuclear Information System (INIS)

Medrano, M.; Alejaldre, C.; Doncel, J.; Garcia, A.; Ibarra, A.; Jimenez, J.A.; Sanchez de Mora, M.A.; Alcala, F.; Diez, J.E.; Dominguez, M.; Albisu, F.

2003-01-01

The studies carried out to evaluate and select a candidate site for International Thermonuclear Experimental Reactor (ITER) construction in Spain are presented in this paper. The ITER design, completed in July 2001, considered a number of technical requirements that must be fulfilled by the selected site. Several assumptions concerning the ITER site were made in order to carry on the design before final site selection. In the studies undertaken for ITER site selection in Spain, the referred technical requirements and assumptions were applied across the whole of Spain and two areas were identified as being preferential. These areas are on the Mediterranean coast and are situated in the Catalan and Valencian regions. A comparative evaluation based on technical characteristics for the concrete plots, proposed within the preferential areas, has been done. The result of these studies was the selection of a site that was deemed to be the most competitive--Vandellos (Tarragona)--and it was proposed to the European Commission for detailed studies in order to be considered as a possible European site for ITER construction. Another key factor for hosting ITER in Spain, is the licensing process. The present status is summarised in this paper

Indicators of safety culture - selection and utilization of leading safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu; Pietikaeinen, Elina (VTT, Technical Research Centre of Finland (Finland))

2010-03-15

Safety indicators play a role in providing information on organizational performance, motivating people to work on safety and increasing organizational potential for safety. The aim of this report is to provide an overview on leading safety indicators in the domain of nuclear safety. The report explains the distinction between lead and lag indicators and proposes a framework of three types of safety performance indicators - feedback, monitor and drive indicators. Finally the report provides guidance for nuclear energy organizations for selecting and interpreting safety indicators. It proposes the use of safety culture as a leading safety performance indicator and offers an example list of potential indicators in all three categories. The report concludes that monitor and drive indicators are so called lead indicators. Drive indicators are chosen priority areas of organizational safety activity. They are based on the underlying safety model and potential safety activities and safety policy derived from it. Drive indicators influence control measures that manage the socio technical system; change, maintain, reinforce, or reduce something. Monitor indicators provide a view on the dynamics of the system in question; the activities taking place, abilities, skills and motivation of the personnel, routines and practices - the organizational potential for safety. They also monitor the efficacy of the control measures that are used to manage the socio technical system. Typically the safety performance indicators that are used are lagging (feedback) indicators that measure the outcomes of the socio technical system. Besides feedback indicators, organizations should also acknowledge the important role of monitor and drive indicators in managing safety. The selection and use of safety performance indicators is always based on an understanding (a model) of the socio technical system and safety. The safety model defines what risks are perceived. It is important that the safety

Indicators of safety culture - selection and utilization of leading safety performance indicators

International Nuclear Information System (INIS)

Reiman, Teemu; Pietikaeinen, Elina

2010-03-01

Safety indicators play a role in providing information on organizational performance, motivating people to work on safety and increasing organizational potential for safety. The aim of this report is to provide an overview on leading safety indicators in the domain of nuclear safety. The report explains the distinction between lead and lag indicators and proposes a framework of three types of safety performance indicators - feedback, monitor and drive indicators. Finally the report provides guidance for nuclear energy organizations for selecting and interpreting safety indicators. It proposes the use of safety culture as a leading safety performance indicator and offers an example list of potential indicators in all three categories. The report concludes that monitor and drive indicators are so called lead indicators. Drive indicators are chosen priority areas of organizational safety activity. They are based on the underlying safety model and potential safety activities and safety policy derived from it. Drive indicators influence control measures that manage the socio technical system; change, maintain, reinforce, or reduce something. Monitor indicators provide a view on the dynamics of the system in question; the activities taking place, abilities, skills and motivation of the personnel, routines and practices - the organizational potential for safety. They also monitor the efficacy of the control measures that are used to manage the socio technical system. Typically the safety performance indicators that are used are lagging (feedback) indicators that measure the outcomes of the socio technical system. Besides feedback indicators, organizations should also acknowledge the important role of monitor and drive indicators in managing safety. The selection and use of safety performance indicators is always based on an understanding (a model) of the socio technical system and safety. The safety model defines what risks are perceived. It is important that the safety

Ratios performance indicator evaluation of selected engineering enterprises in the northeast cohesion region

OpenAIRE

Šenec, Alexandr

2014-01-01

The paper deals with the performance indicator evaluation of selected industrial companies with a predominance of engineering production. Ratio indicators were used in order to measure business performance per unit of fixed assets and per employee. Analyzed data were obtained from companies annual reports. Trends ratio indicators were intended with the help of mathematical and statistical methods. These ratios indicator assessing the level of performance, value added and operating profit p...

Performance analysis of selective cooperation with fixed gain relays in Nakagami-m channels

KAUST Repository

Hussain, Syed Imtiaz; Hasna, Mazen Omar; Alouini, Mohamed-Slim

2012-01-01

Selecting the best relay using the maximum signal to noise ratio (SNR) among all the relays ready to cooperate saves system resources and utilizes the available bandwidth more efficiently compared to the regular all-relay cooperation. In this paper, we analyze the performance of the best relay selection scheme with fixed gain relays operating in Nakagami-. m channels. We first derive the probability density function (PDF) of upper bounded end-to-end SNR of the relay link. Using this PDF, we derive some key performance parameters for the system including average bit error probability and average channel capacity. The analytical results are verified through Monte Carlo simulations. © 2012 Elsevier B.V.

Performance analysis of selective cooperation with fixed gain relays in Nakagami-m channels

KAUST Repository

Hussain, Syed Imtiaz

2012-09-01

Selecting the best relay using the maximum signal to noise ratio (SNR) among all the relays ready to cooperate saves system resources and utilizes the available bandwidth more efficiently compared to the regular all-relay cooperation. In this paper, we analyze the performance of the best relay selection scheme with fixed gain relays operating in Nakagami-. m channels. We first derive the probability density function (PDF) of upper bounded end-to-end SNR of the relay link. Using this PDF, we derive some key performance parameters for the system including average bit error probability and average channel capacity. The analytical results are verified through Monte Carlo simulations. © 2012 Elsevier B.V.

[Effects of anxiety and the COMT gene on cortical evoked potentials and performance effectiveness of selective attention].

Science.gov (United States)

Alfimova, M V; Golimbet, V E; Lebedeva, I S; Korovaĭtseva, G I; Lezheĭko, T V

2014-01-01

We studied influence of the anxiety-related trait Harm Avoidance and the COMT gene, which is an important modulator of prefrontal functioning, on event-related potentials in oddball paradigm and performance effectiveness of selective attention. For 50 individuals accuracy and time of searching words among letters at any desired rate and then under an instruction to perform the task as quickly and accurate as possible were measured. Scores on the Harm Avoidance scale from Cloninger's Temperament and Character Inventory, N100 and P300 parameters, and COMTVa1158Met genotypes were obtained for them as well. Searching accuracy and time were mainly related to N100 amplitude. The COMT genotype and Harm Avoidance did not affect N100 amplitude; however, the N100 amplitude modulated their effects on accuracy and time dynamics. Harm Avoidance was positively correlated with P300 latency. The results suggest that anxiety and the COMT gene effects on performance effectiveness of selective attention depend on cognitive processes reflected in N100 parameters.

Genetic selection on abdominal fat content alters the reproductive performance of broilers.

Science.gov (United States)

Zhang, X Y; Wu, M Q; Wang, S Z; Zhang, H; Du, Z Q; Li, Y M; Cao, Z P; Luan, P; Leng, L; Li, H

2018-06-01

The effects of obesity on reproduction have been widely reported in humans and mice. The present study was designed to compare the reproductive performance of lean and fat chicken lines, divergently selected for abdominal fat content. The following parameters were determined and analyzed in the two lines: (1) reproductive traits, including age at first egg and total egg numbers from generations 14 to 18, absolute and relative testicular weights at 7, 14, 25, 30, 45 and 56 weeks of age, semen quality at 30, 45 and 56 weeks of age in generation 18, and fertility and hatchability from generations 14 to 18; (2) reproductive hormones at 7, 14, 25, 30, 45 and 56 weeks of age in generation 18; (3) and the relative mRNA abundance of genes involved in reproduction at 7, 14, 25, 30, 45 and 56 weeks of age in generation 18. In females, birds in the lean line laid more eggs from the first egg to 40 weeks of age than the birds in the fat line. In male broilers, the birds in the lean line had higher absolute and relative testicular weights at 7, 14 and 25 weeks of age, but lower absolute and relative testicular weights at 56 weeks of age than the birds in the fat line. Male birds in the lean line had greater sperm concentrations and larger numbers of motile and morphologically normal sperms at 30, 45 and 56 weeks of age than the birds in the fat line. Fertility and hatchability were also higher in the lean line than in the fat line. Significant differences in the plasma levels of reproductive hormones and the expression of reproduction-associated genes were also found at different ages in the lean and fat birds, in both males and females. These results suggest that reproductive performance is better in lean birds than in fat birds. In view of the unique divergent lines used in this study, these results imply that selecting for abdominal fat deposition negatively affects the reproductive performance of birds.

Reconsidering vocational interests for personnel selection: the validity of an interest-based selection test in relation to job knowledge, job performance, and continuance intentions.

Science.gov (United States)

Van Iddekinge, Chad H; Putka, Dan J; Campbell, John P

2011-01-01

Although vocational interests have a long history in vocational psychology, they have received extremely limited attention within the recent personnel selection literature. We reconsider some widely held beliefs concerning the (low) validity of interests for predicting criteria important to selection researchers, and we review theory and empirical evidence that challenge such beliefs. We then describe the development and validation of an interests-based selection measure. Results of a large validation study (N = 418) reveal that interests predicted a diverse set of criteria—including measures of job knowledge, job performance, and continuance intentions—with corrected, cross-validated Rs that ranged from .25 to .46 across the criteria (mean R = .31). Interests also provided incremental validity beyond measures of general cognitive aptitude and facets of the Big Five personality dimensions in relation to each criterion. Furthermore, with a couple exceptions, the interest scales were associated with small to medium subgroup differences, which in most cases favored women and racial minorities. Taken as a whole, these results appear to call into question the prevailing thought that vocational interests have limited usefulness for selection.

Performance and anthropometric characteristics of prospective elite junior Australian footballers: a case study in one junior team.

Science.gov (United States)

Veale, James P; Pearce, Alan J; Koehn, Stefan; Carlson, John S

2008-04-01

The aim of the study was to compare anthropometric and physical performance data of players who were selected for a Victorian elite junior U18 Australian rules football squad. Prior to the selection of the final training squad, 54 players were assessed using a battery of standard anthropometric and physical performance tests. Multivariate analysis (MANOVA) showed significant (pcharacteristics can be observed that discriminate between players selected and non-selected, and demonstrates the value of physical fitness testing within the talent identification process of junior (16-18 years) players for squad and/or team selection. Based on MANOVA results, the findings from this study suggest team selection appeared to be related to a generally higher performance across the range of tests. Further, age was not a confounding variable as players selected tended to be younger than those non-selected. These findings reflect the general consensus that, in state-based junior competition, there is evidence of promoting overall player development, selecting those who are generally able to fulfil a range of positions and selecting players on their potential.

Evaluating the effectiveness of a 360-degree performance appraisal and feedback in a selected steel organisation / Koetlisi Eugene Lithakong

OpenAIRE

Lithakong, Koetlisi Eugene

2014-01-01

Most companies are competing in the diverse global markets, and competitive advantage through human capital is becoming very important. Employee development for high productivity and the use of effective tools to measure their performance are therefore paramount. One such tool is the 360-degree performance appraisal system. The study on the effectiveness of the 360-degree performance appraisal was conducted on a selected steel organisation. The primary objective of the research...

Shade selection performed by novice dental professionals and colorimeter.

Science.gov (United States)

Klemetti, E; Matela, A-M; Haag, P; Kononen, M

2006-01-01

The objective of this study was to test inter-observer variability in shade selection for porcelain restorations, using three different shade guides: Vita Lumin Vacuum, Vita 3D-Master and Procera. Nineteen young dental professionals acted as observers. The results were also compared with those of a digital colorimeter (Shade Eye Ex; Shofu, Japan). Regarding repeatability, no significant differences were found between the three shade guides, although repeatability was relatively low (33-43%). Agreement with the colorimetric results was also low (8-34%). In conclusion, shade selection shows moderate to great inter-observer variation. In teaching and standardizing the shade selection procedure, a digital colorimeter may be a useful educational tool.

Doublet III limiter performance and implications for mechanical design and material selection for future limiters

International Nuclear Information System (INIS)

Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

1979-10-01

The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described

Doublet III limiter performance and implications for mechanical design and material selection for future limiters

Energy Technology Data Exchange (ETDEWEB)

Sabado, M.M.; Marcus, F.B.; Trester, P.W.; Wesley, J.C.

1979-10-01

The plasma limiter system for Doublet III is described. Initially, high-Z materials, Ta-10W for the primary limiter and Mo for the backup limiters, were selected as the most attractive metallic candidates from the standpoint of thermal and structural properties. For the purpose of evaluating the effect of material Z on plasma performance, the nonmagnetic, Ni-base alloy Inconel X-750 was selected for a medium-Z limiter material. Graphite, a low-Z material, will likely be the next limiter material for evaluation. Design and material selection criteria for the different Z ranges are presented. The performance of the high-Z limiters in Doublet III is reviewed for an operation period that included approximately 5000 plasma shots. Changes in surface appearance and metallurgical changes are characterized. Discussion is presented on how and to what extent the high-Z elements affected the performance of the plasma based on theory and measurements in Doublet III. The fabrication processes for the Inconel X-750 limiters are summarized, and, last, observations on early performance of the Inconel limiters are described. (MOW)

Thermodynamic study of selected monoterpenes II

International Nuclear Information System (INIS)

Štejfa, Vojtěch; Fulem, Michal; Růžička, Květoslav; Červinka, Ctirad

2014-01-01

Highlights: • (−)-Borneol, (−)-camphor, (±)-camphene, and (+)-fenchone were studied. • New thermodynamic data were measured and calculated. • Most of thermodynamic data are reported for the first time. - Abstract: A thermodynamic study of selected monoterpenes, (−)-borneol, (−)-camphor, (±)-camphene, and (+)-fenchone is presented in this work. The vapor pressure measurements were performed using the static method over the environmentally important temperature range from (238 to 308) K. Heat capacities of condensed phases were measured by Tian–Calvet calorimetry in the temperature interval from (258 to 355) K. The phase behavior was investigated by differential scanning calorimetry (DSC) from subambient temperatures up to the fusion temperatures. The thermodynamic properties in the ideal-gas state were calculated by combining statistical thermodynamic and density functional theory (DFT) calculations. Calculated ideal-gas heat capacities and experimental data for vapor pressures and condensed phase heat capacities were treated simultaneously to obtain a consistent thermodynamic description

The interface of nutritional practices of selected basketball players of Nnamdi Azikiwe University, Awka, on performance.

Science.gov (United States)

Eugene, Alagbu Chukwubikem; Agwubuike, E O

2012-08-31

The nutritional practices of athletes are critical to sports performance, since good result is the goal or expectations of all sports stake-holders, coaches, sports administrators/managers and spectators alike, therefore the issue of good nutrition regarding these "human machines" (athletes), calls for serious attention. This research, therefore tried to examine the nutritional practices of some selected Basketball players of Nnamdi Azikiwe University (UNIZIK) Awka, in Anambra State of Nigeria. Some 59 male and female Basketball (B/B) players were purposefully selected to participate in the study. A self developed questionnaire (r = 0.71) was administered on them and Weighted Mean Score (WMS). This was in an attempt to ascertain whether the dietary manipulations as practiced by these athletes immediately before competition, affect their performance, in any way. Findings revealed daily inadequate consumption of required proportion of nutrients and very poor timing of meals by the players.

Instance Selection for Classifier Performance Estimation in Meta Learning

Directory of Open Access Journals (Sweden)

Marcin Blachnik

2017-11-01

Full Text Available Building an accurate prediction model is challenging and requires appropriate model selection. This process is very time consuming but can be accelerated with meta-learning–automatic model recommendation by estimating the performances of given prediction models without training them. Meta-learning utilizes metadata extracted from the dataset to effectively estimate the accuracy of the model in question. To achieve that goal, metadata descriptors must be gathered efficiently and must be informative to allow the precise estimation of prediction accuracy. In this paper, a new type of metadata descriptors is analyzed. These descriptors are based on the compression level obtained from the instance selection methods at the data-preprocessing stage. To verify their suitability, two types of experiments on real-world datasets have been conducted. In the first one, 11 instance selection methods were examined in order to validate the compression–accuracy relation for three classifiers: k-nearest neighbors (kNN, support vector machine (SVM, and random forest. From this analysis, two methods are recommended (instance-based learning type 2 (IB2, and edited nearest neighbor (ENN which are then compared with the state-of-the-art metaset descriptors. The obtained results confirm that the two suggested compression-based meta-features help to predict accuracy of the base model much more accurately than the state-of-the-art solution.

A Combinatory Approach for Selecting Prognostic Genes in Microarray Studies of Tumour Survivals

Directory of Open Access Journals (Sweden)

Qihua Tan

2009-01-01

Full Text Available Different from significant gene expression analysis which looks for genes that are differentially regulated, feature selection in the microarray-based prognostic gene expression analysis aims at finding a subset of marker genes that are not only differentially expressed but also informative for prediction. Unfortunately feature selection in literature of microarray study is predominated by the simple heuristic univariate gene filter paradigm that selects differentially expressed genes according to their statistical significances. We introduce a combinatory feature selection strategy that integrates differential gene expression analysis with the Gram-Schmidt process to identify prognostic genes that are both statistically significant and highly informative for predicting tumour survival outcomes. Empirical application to leukemia and ovarian cancer survival data through-within- and cross-study validations shows that the feature space can be largely reduced while achieving improved testing performances.

Performance of WLAN RSS-based SON for LTE/WLAN access network selection

NARCIS (Netherlands)

Wang, Y.; Djapic, R.; Bergström, A.; Kovács, I.Z.; Laselva, D.; Spaey, K.; Sas, B.

2014-01-01

Mobile Network Operators (MNOs) are integrating carrier-grade Wireless Local Area Network (WLAN) to cellular networks to improve network performance and user experience. Access network selection (ANS) between cellular and WLAN plays a key role in the integration. Given the complexity of

PERFORMANCE AND SELECTIVITY OF CERAMIC MEMBRANES IN THE ULTRAFILTRATION OF MODEL EMULSION IN SALINE

Directory of Open Access Journals (Sweden)

Konrad ĆWIRKO

2017-04-01

Full Text Available Oily wastewaters from different onshore and offshore installations and from maritime transport pose a serious threat to the environment so they must be treated by multistage separation also including membrane processes. The main advantages of such membranes are high performance and selectivity, high resistance for temperature and pressure, resistance for acids, bases and solvents, long service life and for application – significant reduction of industries and transport environmental impact. This work presents the results of the process of separation of oil from the emulsion with NaCl addition. Research was performed with a use of laboratory installation with ceramic 300 kDa membrane. The analysis concerned performance and selectivity of a membrane in the function of time and test results have been subsequently compared with the requirements of the IMO.

The role of anthropometric, performance and psychological attributes in predicting selection into an elite development programme in older adolescent rugby league players.

Science.gov (United States)

Tredrea, Matthew; Dascombe, Ben; Sanctuary, Colin E; Scanlan, Aaron Terrence

2017-10-01

This study aimed to identify attributes that discriminate selected from non-selected players and predict selection into a rugby league development programme in older adolescent players. Anthropometric, performance and psychological attributes were measured in under-16 (N = 100) and under-18 (N = 60) rugby league players trialling for selection into a development programme with a professional Australian club. Sprint times (P rugby league and indicate talent identification test batteries should be age-specific in older adolescent players.

Physiological, physical and on-ice performance criteria for selection of elite ice hockey teams

Directory of Open Access Journals (Sweden)

R Roczniok

2016-01-01

Full Text Available The purpose of this study was to examine physiological and physical determinants of ice-hockey performance in order to assess their impact on the result during a selection for ice hockey. A total of 42 ice hockey players took part in the selection camp. At the end of the camp 20 best players were selected by team of expert coaches to the ice hockey team and created group G1, while the second group (G2 consisted of not selected players (non-successful group Evaluation of goodness of fit of the model to the data was based on the Hosmer Lemeshow test Ice hockey players selected to the team were taller 181.95±4.02 cm, had lower % body fat 13.17±3.17%, a shorter time to peak power 2.47±0.35 s , higher relative peak power 21.34±2.41 W • kg-1 and higher relative total work 305.18±28.41 J • kg-1. The results of the aerobic capacity test showed significant differences only in case of two variables. Ice hockey players in the G1 had higher VO2max 4.07±0.31 l • min-1 values than players in the G2 as well as ice hockey players in G1 showed a higher level of relative VO2max 51.75±2.99 ml • min-1 • kg-1 than athletes in G2. Ice hockey players selected to the team (G1 performed better in the 30 m Forwards Sprint 4.28±0.31 s; 6x9 Turns 12.19±0.75 s; 6x9 stops 12.79±0.49 s and Endurance test (6x30 m stops 32.01±0.80 s than players in G2. The logistic regression model showed that the best predictors of success in the recruitment process of top level ice hockey players were time to peak power, relative peak power, VO2max and 30 m sprint forwards on ice. On the basis of the constructed predictive logistic regression model it will be possible to determine the probability of success of the athletes during following the selection processes to the team.

Scapular muscle activity from selected strengthening exercises performed at low and high intensity

DEFF Research Database (Denmark)

Andersen, Christoffer H; Zebis, Mette K; Saervoll, Charlotte

2012-01-01

A balanced level of muscle strength between the different parts of the scapular muscles is important to optimize performance and prevent injuries in athletes. Emerging evidence suggests that many athletes lack balanced strength in the scapular muscles. Evidence based recommendations are important...... for proper exercise prescription. This study determines scapular muscle activity during strengthening exercises for scapular muscles performed at low and high intensities (Borg-CR10 level 3 and 8). Surface electromyography (EMG) from selected scapular muscles was recorded during seven strengthening exercises...... and expressed as a percentage of the maximal EMG. Seventeen women (aged 24-55 years) without serious disorders participated. Several of the investigated exercises - press-up, prone flexion, one-arm row and prone abduction at Borg 3 and press-up, push-up plus and one-arm row at Borg 8 - predominantly activated...

A Comparative Study to Predict Student’s Performance Using Educational Data Mining Techniques

Science.gov (United States)

Uswatun Khasanah, Annisa; Harwati

2017-06-01

Student’s performance prediction is essential to be conducted for a university to prevent student fail. Number of student drop out is one of parameter that can be used to measure student performance and one important point that must be evaluated in Indonesia university accreditation. Data Mining has been widely used to predict student’s performance, and data mining that applied in this field usually called as Educational Data Mining. This study conducted Feature Selection to select high influence attributes with student performance in Department of Industrial Engineering Universitas Islam Indonesia. Then, two popular classification algorithm, Bayesian Network and Decision Tree, were implemented and compared to know the best prediction result. The outcome showed that student’s attendance and GPA in the first semester were in the top rank from all Feature Selection methods, and Bayesian Network is outperforming Decision Tree since it has higher accuracy rate.

Performance Implications of Business Model Change: A Case Study

Directory of Open Access Journals (Sweden)

Jana Poláková

2015-01-01

Full Text Available The paper deals with changes in performance level introduced by the change of business model. The selected case is a small family business undergoing through substantial changes in reflection of structural changes of its markets. The authors used the concept of business model to describe value creation processes within the selected family business and by contrasting the differences between value creation processes before and after the change introduced they prove the role of business model as the performance differentiator. This is illustrated with the use of business model canvas constructed on the basis interviews, observations and document analysis. The two business model canvases allow for explanation of cause-and-effect relationships within the business leading to change in performance. The change in the performance is assessed by financial analysis of the business conducted over the period of 2006–2012 demonstrates changes in performance (comparing development of ROA, ROE and ROS having their lowest levels before the change of business model was introduced, growing after the introduction of the change, as well as the activity indicators with similar developments of the family business. The described case study contributes to the concept of business modeling with the arguments supporting its value as strategic tool facilitating decisions related to value creation within the business.

On the performance of arbitrary transmit selection for threshold-based receive MRC with and without co-channel interference

KAUST Repository

Radaydeh, Redha Mahmoud Mesleh

2011-11-01

The performance of multiple-antenna diversity systems in which the receiver combines signal replicas per threshold-based maximal ratio combining (MRC) and transmitter uses only a single antenna according to receive combined signal strength is studied. The impact of imperfect channel estimation and the effect of phase and time misalignments between desired and undesired signals are implicitly investigated. It is assumed that the desired signal replicas and interfering signals undergo statistically independent flat Rayleigh fading. The analysis is applicable for arbitrary transmit antenna selection, based either on receive combined signal-to-noise ratio (SNR) or receive combined signal-to-interference-plus-noise ratio (SINR). For the scenario of identical multiple-antenna channels, closed-form analytical results for the combined SNR statistics and some performance measures are first presented. The SNR-based and SINR-based selection algorithms are then employed to obtain expressions for the distribution of combined SINR and outage probability performance, which are applicable for different statistical models of interfering signals. The adopted system models herein as well as the analytical development add enhancements on many existing results, and can be used to study the performance of different architectures under various channel conditions when the implementation complexity is of interest. © 2011 IEEE.

On the performance of arbitrary transmit selection for threshold-based receive MRC with and without co-channel interference

KAUST Repository

Radaydeh, Redha Mahmoud Mesleh; Alouini, Mohamed-Slim

2011-01-01

The performance of multiple-antenna diversity systems in which the receiver combines signal replicas per threshold-based maximal ratio combining (MRC) and transmitter uses only a single antenna according to receive combined signal strength is studied. The impact of imperfect channel estimation and the effect of phase and time misalignments between desired and undesired signals are implicitly investigated. It is assumed that the desired signal replicas and interfering signals undergo statistically independent flat Rayleigh fading. The analysis is applicable for arbitrary transmit antenna selection, based either on receive combined signal-to-noise ratio (SNR) or receive combined signal-to-interference-plus-noise ratio (SINR). For the scenario of identical multiple-antenna channels, closed-form analytical results for the combined SNR statistics and some performance measures are first presented. The SNR-based and SINR-based selection algorithms are then employed to obtain expressions for the distribution of combined SINR and outage probability performance, which are applicable for different statistical models of interfering signals. The adopted system models herein as well as the analytical development add enhancements on many existing results, and can be used to study the performance of different architectures under various channel conditions when the implementation complexity is of interest. © 2011 IEEE.

On the performance of future full-duplex relay selection networks

KAUST Repository

Khafagy, Mohammad Galal

2015-09-01

In this work, we evaluate the performance of relay selection over Nakagami-m fading channels in the presence of a cluster of full-duplex decode-and-forward relays with self-interference. Specifically, we derive the exact cumulative distribution function of the end-to-end signal-to-interference-plus-noise ratio in the presence of a direct source-destination link. When a direct link exists, all dual-hop paths become mutually correlated due to the common direct-link interference. The presented exact results enable the evaluation of the outage performance and system throughput for fixed-rate transmission systems. The theoretical findings are verified by numerical simulations, where the severity of fading effect in the residual self-interference link is also discussed.

On the performance of future full-duplex relay selection networks

KAUST Repository

Khafagy, Mohammad Galal; Alouini, Mohamed-Slim; Aissa, Sonia

2015-01-01

In this work, we evaluate the performance of relay selection over Nakagami-m fading channels in the presence of a cluster of full-duplex decode-and-forward relays with self-interference. Specifically, we derive the exact cumulative distribution function of the end-to-end signal-to-interference-plus-noise ratio in the presence of a direct source-destination link. When a direct link exists, all dual-hop paths become mutually correlated due to the common direct-link interference. The presented exact results enable the evaluation of the outage performance and system throughput for fixed-rate transmission systems. The theoretical findings are verified by numerical simulations, where the severity of fading effect in the residual self-interference link is also discussed.

Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project

Energy Technology Data Exchange (ETDEWEB)

O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

Case Study of Using High Performance Commercial Processors in Space

Science.gov (United States)

Ferguson, Roscoe C.; Olivas, Zulema

2009-01-01

The purpose of the Space Shuttle Cockpit Avionics Upgrade project (1999 2004) was to reduce crew workload and improve situational awareness. The upgrade was to augment the Shuttle avionics system with new hardware and software. A major success of this project was the validation of the hardware architecture and software design. This was significant because the project incorporated new technology and approaches for the development of human rated space software. An early version of this system was tested at the Johnson Space Center for one month by teams of astronauts. The results were positive, but NASA eventually cancelled the project towards the end of the development cycle. The goal to reduce crew workload and improve situational awareness resulted in the need for high performance Central Processing Units (CPUs). The choice of CPU selected was the PowerPC family, which is a reduced instruction set computer (RISC) known for its high performance. However, the requirement for radiation tolerance resulted in the re-evaluation of the selected family member of the PowerPC line. Radiation testing revealed that the original selected processor (PowerPC 7400) was too soft to meet mission objectives and an effort was established to perform trade studies and performance testing to determine a feasible candidate. At that time, the PowerPC RAD750s were radiation tolerant, but did not meet the required performance needs of the project. Thus, the final solution was to select the PowerPC 7455. This processor did not have a radiation tolerant version, but had some ability to detect failures. However, its cache tags did not provide parity and thus the project incorporated a software strategy to detect radiation failures. The strategy was to incorporate dual paths for software generating commands to the legacy Space Shuttle avionics to prevent failures due to the softness of the upgraded avionics.

Comparisons of Growth and Survival Performance Among Selected Families and Wild Populations of Fenneropenaeus chinensis

Science.gov (United States)

Luo, Kun; Kong, Jie; Meng, Xianhong; Luan, Sheng; Cao, Baoxiang; Chen, Baolong

2018-04-01

In this study, families of selected population for growth (SP_BWT), selected population for white spot syndrome virus (WSSV) resistance (SP_RW), Bohai wild population (WP_BH) and Huanghai wild population (WP_HH) of F. chinensis were constructed through artificial insemination and with the standardized procedure of larvae rearing. Growth and survival performance were studied among four populations after a 70 days common test. The results showed that the maximum least square mean of body weight was 17.50 g in SP_BWT while the minimum was 13.03 g in WP_HH. Compared with WP_BH, body weight of SP_BWT increased by 23.41% ( P 0.05). Body weights of SP_BWT and SP_RW were significantly higher than that of WP_HH, which increased by 34.31% ( P populations was 0.19, 0.18, 0.17 and 0.16 g d-1, respectively. Coefficient of variation of body weight among four populations was high, which ranged from 32.67% to 35.25%. Such a range showed that there was the potentiality for further improvement in selected populations. Coefficient of variation of survival rate among four populations was low, varying between 3.20% and 5.90%. The difference of survival was highly significant ( P populations ( P growth performances were also observed among different families in each population. The body weight of 798F family was the highest. The absolute growth rate (AGR) was 0.25 g d-1, 150% higher than that of the lowest one, 0.1 g d-1 in 807F family. Survival rate of families among four populations was different. The highest was 94.74%, and the lowest was 71.88%.

Conceptual framework in creating and selecting the performance measurement system for marketing strategy control

Directory of Open Access Journals (Sweden)

Krstić Bojan

2011-01-01

Full Text Available Performance measurement in modern conditions is one of the most important business requirements since enterprises face the need to exhibit returns for stockholders and investors, but also contribution of management to those returns, as well as contribution of certain business units, functional departments and activities within them. Hence, it is particularly important to assess marketing successfulness as a business function according to return on investment in marketing activities, but also according to the set of indicators from following performance groups - marketing effectiveness and marketing efficiency. Core issue is which measures to select and use in the marketing performance measurement system of certain enterprise so that it could be able to assess how effective and efficient its marketing is. In other words, adequate performance measurement system ought to contain performance measures that will be used to monitor effects and marketing strategy implementation process (controlling while implementing, and performance measures that can be applied to overall effect monitoring after the strategy implementation period. Otherwise, creating the marketing performance measurement system is a complex task for marketing managers. Therefore, the aim of this paper is to explore key principles and develop conceptual framework for creating and selecting performance measurement system for marketing strategy control which is based on characteristics and key success factors of marketing strategy, that is activities and actions for its operationalizing and effective implementing.

Guidelines for patient selection and performance of carotid artery stenting.

Science.gov (United States)

Bladin, Christopher; Chambers, Brian; New, Gishel; Denton, Michael; Lawrence-Brown, Michael

2010-06-01

The endovascular treatment of carotid atherosclerosis with carotid artery stenting (CAS) remains controversial. Carotid endarterectomy remains the benchmark in terms of procedural mortality and morbidity. At present, there are no consensus Australasian guidelines for the safe performance of CAS. We applied a modified Delphi consensus method of iterative consultation between the College representatives on the Carotid Stenting Guidelines Committee (CSGC). Selection of patients suitable for CAS needs careful consideration of clinical and patho-anatomical criteria and cannot be directly extrapolated from clinical indicators for carotid endarterectomy (CEA). Randomized controlled trials (including pooled analyses of results) comparing CAS with CEA for treatment of symptomatic stenosis have demonstrated that CAS is more hazardous than CEA. On current evidence, the CGSC therefore recommends that CAS should not be performed in the majority of patients requiring carotid revascularisation. The evidence for CAS in patients with symptomatic severe carotid stenosis who are considered medically high risk is weak, and there is currently no evidence to support CAS as a treatment for asymptomatic carotid stenosis. The use of distal protection devices during CAS remains controversial with increased risk of clinically silent stroke. The knowledge requirements for the safe performance of CAS include an understanding of the evidence base from randomized controlled trials, carotid and aortic arch anatomy and pathology, clinical stroke syndromes, the differing treatment options for stroke and carotid atherosclerosis, and recognition and management of periprocedural complications. It is critical that all patients being considered for a carotid intervention have adequate pre-procedural neuro-imaging and an independent, standardized neurological assessment before and after the procedure. Maintenance of proficiency in CAS requires active involvement in surgical/endovascular audit and

Trade Performance of Fruit and Vegetable Industry in Selected ASEAN Countries

OpenAIRE

Emmy, F.A.; Mohd Mansor, Ismail

2009-01-01

This paper examines the trade performance for thirteen commodities in the fruit and vegetable industry in relation to that of selected ASEAN countries (Philippines, Indonesia, Singapore and Thailand), based on Revealed Comparative Advantage (RCA) indicator. The analysis shows that Singapore has comparative advantage in 5 commodities (ground-nuts, hazelnuts, plums, apricots and walnuts), Philippines has comparative advantage in 3 commodities (tomatoes nes prepared or preserved, tomatoes whole ...

APPLICATION OF THE PERFORMANCE SELECTION INDEX METHOD FOR SOLVING MACHINING MCDM PROBLEMS

Directory of Open Access Journals (Sweden)

Dušan Petković

2017-04-01

Full Text Available Complex nature of machining processes requires the use of different methods and techniques for process optimization. Over the past few years a number of different optimization methods have been proposed for solving continuous machining optimization problems. In manufacturing environment, engineers are also facing a number of discrete machining optimization problems. In order to help decision makers in solving this type of optimization problems a number of multi criteria decision making (MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. performance selection index (PSI method for solving machining MCDM problems. The main motivation for using the PSI method is that it is not necessary to determine criteria weights as in other MCDM methods. Applicability and effectiveness of the PSI method have been demonstrated while solving two case studies dealing with machinability of materials and selection of the most suitable cutting fluid for the given machining application. The obtained rankings have good correlation with those derived by the past researchers using other MCDM methods which validate the usefulness of this method for solving machining MCDM problems.

41 CFR 102-74.135 - Who selects construction and alteration projects that are to be performed?

Science.gov (United States)

2010-07-01

... and alteration projects that are to be performed? 102-74.135 Section 102-74.135 Public Contracts and... construction and alteration projects that are to be performed? The Administrator of General Services selects construction and alteration projects to be performed. ...

Separation properties of the MIL-125(Ti) Metal-Organic Framework in high-performance liquid chromatography revealing cis/trans selectivity.

Science.gov (United States)

Van der Perre, Stijn; Liekens, Anuschka; Bueken, Bart; De Vos, Dirk E; Baron, Gino V; Denayer, Joeri F M

2016-10-21

Monodisperse MIL-125(Ti) Metal-Organic Framework crystals were synthesized and studied as stationary phase in high performance liquid chromatography (HPLC). Different pure compounds and model mixtures (including stereoisomer mixtures) were injected from which chromatographic parameters, including selectivities and resolution factors, were determined to evaluate the adsorption properties and separation performance of MIL-125(Ti) in liquid phase. The MIL-125(Ti) framework displayed a trans selectivity for cis/trans difunctionalized cyclohexane molecules with high selectivity and resolution for 1,3-dimethylcyclohexane and 4-ethylcyclohexanol. The slurry-packed column was further characterized via van Deemter analysis. Fitting of the van Deemter equation through the experimental points allowed to define the contributions of the different processes to plate height with a significant proportion of the A-term, reflecting the importance of a good crystal packing. Although high in comparison to commercial HPLC stationary phases, a very good plate height of around 50μm was found. Copyright © 2016 Elsevier B.V. All rights reserved.

Empirical study of self-configuring genetic programming algorithm performance and behaviour

International Nuclear Information System (INIS)

KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F. Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Semenkin, E; KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" data-affiliation=" (Siberian State Aerospace University named after Academician M.F. Reshetnev 31 KrasnoyarskiyRabochiy prospect, Krasnoyarsk, 660014 (Russian Federation))" >Semenkina, M

2015-01-01

The behaviour of the self-configuring genetic programming algorithm with a modified uniform crossover operator that implements a selective pressure on the recombination stage, is studied over symbolic programming problems. The operator's probabilistic rates interplay is studied and the role of operator variants on algorithm performance is investigated. Algorithm modifications based on the results of investigations are suggested. The performance improvement of the algorithm is demonstrated by the comparative analysis of suggested algorithms on the benchmark and real world problems

Genomic selection for crossbred performance accounting for breed-specific effects.

Science.gov (United States)

Lopes, Marcos S; Bovenhuis, Henk; Hidalgo, André M; van Arendonk, Johan A M; Knol, Egbert F; Bastiaansen, John W M

2017-06-26

Breed-specific effects are observed when the same allele of a given genetic marker has a different effect depending on its breed origin, which results in different allele substitution effects across breeds. In such a case, single-breed breeding values may not be the most accurate predictors of crossbred performance. Our aim was to estimate the contribution of alleles from each parental breed to the genetic variance of traits that are measured in crossbred offspring, and to compare the prediction accuracies of estimated direct genomic values (DGV) from a traditional genomic selection model (GS) that are trained on purebred or crossbred data, with accuracies of DGV from a model that accounts for breed-specific effects (BS), trained on purebred or crossbred data. The final dataset was composed of 924 Large White, 924 Landrace and 924 two-way cross (F1) genotyped and phenotyped animals. The traits evaluated were litter size (LS) and gestation length (GL) in pigs. The genetic correlation between purebred and crossbred performance was higher than 0.88 for both LS and GL. For both traits, the additive genetic variance was larger for alleles inherited from the Large White breed compared to alleles inherited from the Landrace breed (0.74 and 0.56 for LS, and 0.42 and 0.40 for GL, respectively). The highest prediction accuracies of crossbred performance were obtained when training was done on crossbred data. For LS, prediction accuracies were the same for GS and BS DGV (0.23), while for GL, prediction accuracy for BS DGV was similar to the accuracy of GS DGV (0.53 and 0.52, respectively). In this study, training on crossbred data resulted in higher prediction accuracy than training on purebred data and evidence of breed-specific effects for LS and GL was demonstrated. However, when training was done on crossbred data, both GS and BS models resulted in similar prediction accuracies. In future studies, traits with a lower genetic correlation between purebred and crossbred

Quantitative PCR is a Valuable Tool to Monitor the Performance of DNA-Encoded Chemical Library Selections.

Science.gov (United States)

Li, Yizhou; Zimmermann, Gunther; Scheuermann, Jörg; Neri, Dario

2017-05-04

Phage-display libraries and DNA-encoded chemical libraries (DECLs) represent useful tools for the isolation of specific binding molecules from large combinatorial sets of compounds. With both methods, specific binders are recovered at the end of affinity capture procedures by using target proteins of interest immobilized on a solid support. However, although the efficiency of phage-display selections is routinely quantified by counting the phage titer before and after the affinity capture step, no similar quantification procedures have been reported for the characterization of DECL selections. In this article, we describe the potential and limitations of quantitative PCR (qPCR) methods for the evaluation of selection efficiency by using a combinatorial chemical library with more than 35 million compounds. In the experimental conditions chosen for the selections, a quantification of DNA input/recovery over five orders of magnitude could be performed, revealing a successful enrichment of abundant binders, which could be confirmed by DNA sequencing. qPCR provided rapid information about the performance of selections, thus facilitating the optimization of experimental conditions. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bit Error Rate Performance Analysis of a Threshold-Based Generalized Selection Combining Scheme in Nakagami Fading Channels

Directory of Open Access Journals (Sweden)

Kousa Maan

2005-01-01

Full Text Available The severity of fading on mobile communication channels calls for the combining of multiple diversity sources to achieve acceptable error rate performance. Traditional approaches perform the combining of the different diversity sources using either the conventional selective diversity combining (CSC, equal-gain combining (EGC, or maximal-ratio combining (MRC schemes. CSC and MRC are the two extremes of compromise between performance quality and complexity. Some researches have proposed a generalized selection combining scheme (GSC that combines the best branches out of the available diversity resources ( . In this paper, we analyze a generalized selection combining scheme based on a threshold criterion rather than a fixed-size subset of the best channels. In this scheme, only those diversity branches whose energy levels are above a specified threshold are combined. Closed-form analytical solutions for the BER performances of this scheme over Nakagami fading channels are derived. We also discuss the merits of this scheme over GSC.

Comparison of core-shell and totally porous ultra high performance liquid chromatographic stationary phases based on their selectivity towards alfuzosin compounds.

Science.gov (United States)

Szulfer, Jarosław; Plenis, Alina; Bączek, Tomasz

2014-06-13

This paper focuses on the application of a column classification system based on the Katholieke Universiteit Leuven for the characterization of physicochemical properties of core-shell and ultra-high performance liquid chromatographic stationary phases, followed by the verification of the reliability of the obtained column classification in pharmaceutical practice. In the study, 7 stationary phases produced in core-shell technology and 18 ultra-high performance liquid chromatographic columns were chromatographically tested, and ranking lists were built on the FKUL-values calculated against two selected reference columns. In the column performance test, an analysis of alfuzosin in the presence of related substances was carried out using the brands of the stationary phases with the highest ranking positions. Next, a system suitability test as described by the European Pharmacopoeia monograph was performed. Moreover, a study was also performed to achieve a purposeful shortening of the analysis time of the compounds of interest using the selected stationary phases. Finally, it was checked whether methods using core-shell and ultra-high performance liquid chromatographic columns can be an interesting alternative to the high-performance liquid chromatographic method for the analysis of alfuzosin in pharmaceutical practice. Copyright © 2014 Elsevier B.V. All rights reserved.

Study and distortion correction in a selective dissemination of information system

International Nuclear Information System (INIS)

Freitas Queiroz, I.O. de.

1978-03-01

The Selective Dissemination of Information (S D I) system of the Nuclear Information Center (Brazil) was presented, and some parameters, for the evaluation of performance and distortion were defined. These parameters were quantified for a sample of 35 user's profiles and 25.818 documents. Possible distortion factors were analysed, and some were selected, so that they could be automatically processed. The 35 profiles were up-dated by use of two algorithms developed for this purpose. For the up-dated profiles new values of the parameters were determined and showed that distortion decreased and efficiency improved. Critical points of the system were identified and new studies, on topics investigated superficially, were proposed. (Author) [pt

Selection in artistic gymnastics

Directory of Open Access Journals (Sweden)

Maria Olaru

2009-06-01

Full Text Available This study envisages the analysis of the specific aspects of the selection process in artistic gymnastics, focusing particularly onthe selection of Romania’s recent years. In our opinion, the shift to a cone of darkness of the artistic gymnastics, an extremelypopular sport in our country 20 years ago, is also based on and the orientation of children to other fields – unfortunately manyof them outside sports and physical activities in general. In the present study, we shall present the stages of the artisticgymnastics, as its importance in the subsequent performances has been proven a long time ago. The plethora of qualities andskills which are necessary to select a child for gymnastics and those that this sport develops when performed as a spare timeactivity. The case studied in this endeavour is the one of the main centers for gymnast recruitment in Romania; the attentionpaid by the trainers to the selection for this sport makes the data regarding the number of children involved to increase oncemore. This is a satisfactory fact as it is a well-known fact that a wide range primary selection sets a serious basis for thesecondary selection, and the third, respectively, envisaging the future performance and concurrently ensures the involvementof more children in a physical activity that will prepare them, both physically and mentally for a healthy life.

Object-Based Attention on Social Units: Visual Selection of Hands Performing a Social Interaction.

Science.gov (United States)

Yin, Jun; Xu, Haokui; Duan, Jipeng; Shen, Mowei

2018-05-01

Traditionally, objects of attention are characterized either as full-fledged entities or either as elements grouped by Gestalt principles. Because humans appear to use social groups as units to explain social activities, we proposed that a socially defined group, according to social interaction information, would also be a possible object of attentional selection. This hypothesis was examined using displays with and without handshaking interactions. Results demonstrated that object-based attention, which was measured by an object-specific attentional advantage (i.e., shorter response times to targets on a single object), was extended to two hands performing a handshake but not to hands that did not perform meaningful social interactions, even when they did perform handshake-like actions. This finding cannot be attributed to the familiarity of the frequent co-occurrence of two handshaking hands. Hence, object-based attention can select a grouped object whose parts are connected within a meaningful social interaction. This finding implies that object-based attention is constrained by top-down information.

Performance-influencing factors in homogeneous groups of top athletes: a cross-sectional study

NARCIS (Netherlands)

van Ingen Schenau, G.J.; Bakker, F.C.; de Koning, J.J.; de Groot, G.

1996-01-01

Sport scientists have identified many factors as prerequisites for a good athletic performance in various sports. It is not clear whether these factors also influence the best performers in the homogeneous groups of top athletes selected for national teams. In this study, this issue is addressed

Enhancing the Performance of LibSVM Classifier by Kernel F-Score Feature Selection

Science.gov (United States)

Sarojini, Balakrishnan; Ramaraj, Narayanasamy; Nickolas, Savarimuthu

Medical Data mining is the search for relationships and patterns within the medical datasets that could provide useful knowledge for effective clinical decisions. The inclusion of irrelevant, redundant and noisy features in the process model results in poor predictive accuracy. Much research work in data mining has gone into improving the predictive accuracy of the classifiers by applying the techniques of feature selection. Feature selection in medical data mining is appreciable as the diagnosis of the disease could be done in this patient-care activity with minimum number of significant features. The objective of this work is to show that selecting the more significant features would improve the performance of the classifier. We empirically evaluate the classification effectiveness of LibSVM classifier on the reduced feature subset of diabetes dataset. The evaluations suggest that the feature subset selected improves the predictive accuracy of the classifier and reduce false negatives and false positives.

Waste package performance allocation system study report

International Nuclear Information System (INIS)

Memory, R.D.

1994-01-01

The Waste Package Performance Allocation system study was performed in order to provide a technical basis for the selection of the waste package period of substantially complete containment and its resultant contribution to the overall total system performance. This study began with a reference case based on the current Mined Geologic Disposal System (MGDS) baseline design and added a number of alternative designs. The waste package designs were selected from the designs being considered in detail during Advanced Conceptual Design (ACD). The waste packages considered were multi-barrier packages with a 0.95 cm Alloy 825 inner barrier and a 10, 20, or 45 cm thick carbon steel outer barrier. The waste package capacities varied from 6 to 12 to 21 Pressurized Water Reactor (PWR) fuel assemblies. The vertical borehole and in-drift emplacement modes were also considered, as were thermal loadings of 25, 57, and 114 kW/acre. The repository cost analysis indicated that the 21 PWR in-drift emplacement mode option with the 10 cm and 20 cm outer barrier thicknesses are the least expensive and that the 12 PWR in-drift case has approximately the same cost as the 6 PWR vertical borehole. It was also found that the cost increase from the 10 cm outer barrier waste package to the 20 cm waste package was less per centimeter than the increase from the 20 cm outer barrier waste package to the 45 cm outer barrier waste package. However, the repository cost was nearly linear with the outer barrier thickness for the 21 PWR in-drift case. Finally, corrosion rate estimates are provided and the relationship of repository cost versus waste package lifetime is discussed as is cumulative radionuclide release from the waste package and to the accessible environment for time periods of 10,000 years and 100,000 years

Performance analysis of selective cooperation in underlay cognitive networks over Rayleigh channels

KAUST Repository

Hussain, Syed Imtiaz

2011-06-01

Underlay cognitive networks should follow strict interference thresholds to operate in parallel with primary networks. This constraint limits their transmission power and eventually the area of coverage. Therefore, it is very likely that the underlay networks will make use of relays to transmit signals to the distant secondary users. In this paper, we propose a secondary relay selection scheme which maximizes the end-to-end signal to noise ratio (SNR) for the secondary link while keeping the interference levels to the primary network below a certain threshold. We derive closed form expressions for the probability density function (PDF) of the SNR at the secondary destination, average bit error probability and outage probability. Analytical results are verified through simulations which also give insight about the benefits and tradeoffs of the selective cooperation in underlay cognitive networks. It is shown that, in contrast to non-cognitive selective cooperation, this scheme performs better in low SNR region for cognitive networks. © 2011 IEEE.

Final waste forms project: Performance criteria for phase I treatability studies

International Nuclear Information System (INIS)

Gilliam, T.M.; Hutchins, D.A.; Chodak, P. III

1994-06-01

This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide open-quotes proof-of-principleclose quotes data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.)

Final waste forms project: Performance criteria for phase I treatability studies

Energy Technology Data Exchange (ETDEWEB)

Gilliam, T.M. [Oak Ridge National Lab., TN (United States); Hutchins, D.A. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Chodak, P. III [Massachusetts Institute of Technology (United States)

1994-06-01

This document defines the product performance criteria to be used in Phase I of the Final Waste Forms Project. In Phase I, treatability studies will be performed to provide {open_quotes}proof-of-principle{close_quotes} data to establish the viability of stabilization/solidification (S/S) technologies. This information is required by March 1995. In Phase II, further treatability studies, some at the pilot scale, will be performed to provide sufficient data to allow treatment alternatives identified in Phase I to be more fully developed and evaluated, as well as to reduce performance uncertainties for those methods chosen to treat a specific waste. Three main factors influence the development and selection of an optimum waste form formulation and hence affect selection of performance criteria. These factors are regulatory, process-specific, and site-specific waste form standards or requirements. Clearly, the optimum waste form formulation will require consideration of performance criteria constraints from each of the three categories. Phase I will focus only on the regulatory criteria. These criteria may be considered the minimum criteria for an acceptable waste form. In other words, a S/S technology is considered viable only if it meet applicable regulatory criteria. The criteria to be utilized in the Phase I treatability studies were primarily taken from Environmental Protection Agency regulations addressed in 40 CFR 260 through 265 and 268; and Nuclear Regulatory Commission regulations addressed in 10 CFR 61. Thus the majority of the identified criteria are independent of waste form matrix composition (i.e., applicable to cement, glass, organic binders etc.).

SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

Science.gov (United States)

Natt, Neena; Chang, Alice Y; Berbari, Elie F; Kennel, Kurt A; Kearns, Ann E

2016-01-01

To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. The presence of a laudatory comparative statement in the residency program director's letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = .001; and β = 0.24, P = .009, respectively) and faculty global ratings (β = 0.85, P = .006; and β = 0.96, P = .015, respectively). The presence of a laudatory comparative statement in the residency program director's LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process.

Blind column selection protocol for two-dimensional high performance liquid chromatography.

Science.gov (United States)

Burns, Niki K; Andrighetto, Luke M; Conlan, Xavier A; Purcell, Stuart D; Barnett, Neil W; Denning, Jacquie; Francis, Paul S; Stevenson, Paul G

2016-07-01

The selection of two orthogonal columns for two-dimensional high performance liquid chromatography (LC×LC) separation of natural product extracts can be a labour intensive and time consuming process and in many cases is an entirely trial-and-error approach. This paper introduces a blind optimisation method for column selection of a black box of constituent components. A data processing pipeline, created in the open source application OpenMS®, was developed to map the components within the mixture of equal mass across a library of HPLC columns; LC×LC separation space utilisation was compared by measuring the fractional surface coverage, fcoverage. It was found that for a test mixture from an opium poppy (Papaver somniferum) extract, the combination of diphenyl and C18 stationary phases provided a predicted fcoverage of 0.48 and was matched with an actual usage of 0.43. OpenMS®, in conjunction with algorithms designed in house, have allowed for a significantly quicker selection of two orthogonal columns, which have been optimised for a LC×LC separation of crude extractions of plant material. Copyright © 2016 Elsevier B.V. All rights reserved.

Objective assessment of surgical performance and its impact on a national selection programme of candidates for higher surgical training in plastic surgery.

LENUS (Irish Health Repository)

Carroll, Sean M

2012-02-01

OBJECTIVE: The objective of this study was to develop and validate a transparent, fair and objective assessment programme for the selection of surgical trainees into higher surgical training (HST) in plastic surgery in the Republic of Ireland. METHODS: Thirty-four individuals applied for HST in plastic surgery at the Royal College of Surgeons in Ireland (RCSI) in the academic years 2005-2006 and 2006-2007. Eighteen were short-listed for interview and further assessment. All applicants were required to report on their undergraduate educational performance and their postgraduate professional development. Short-listed applicants completed validated objective assessment simulations of surgical skills, an interview and assessment of their suitability for a career in surgery. RESULTS: When applicants\\' short-listing scores were combined with their interview scores and assessment of their suitability for a career in surgery, individuals who were selected for HST in plastic surgery performed significantly better than those who were not (P<0.002). However, when the assessment of technical skills scores were added the significance level of this difference increased further (P<0.0001) as did the statistical power of the difference to 99.9%, thus increasing the robustness of the selection package. CONCLUSION: The results from this study suggest that the assessment protocol we used to select individuals for HST in plastic surgery reliably and statistically significantly discriminated between the performances of candidates.

Selective recovery of Pd(II) from extremely acidic solution using ion-imprinted chitosan fiber: Adsorption performance and mechanisms

Energy Technology Data Exchange (ETDEWEB)

Lin, Shuo [School of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Wei, Wei [School of Chemical Engineering, Chonbuk National University, Jeonbuk 561-756 (Korea, Republic of); Wu, Xiaohui; Zhou, Tao [School of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Mao, Juan, E-mail: monicamao45@hust.edu.cn [School of Environmental Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Yun, Yeoung-Sang, E-mail: ysyun@jbnu.ac.kr [School of Chemical Engineering, Chonbuk National University, Jeonbuk 561-756 (Korea, Republic of)

2015-12-15

Highlights: • An acid-resisting chitosan fiber was prepared by ion-imprinting technique. • Pd(II) and ECH were as template and two-step crosslinking agent, respectively. • IIF showed a good adsorption and selectivity performance on Pd(II) solutions. • Selectivity was due to the electrostatic attraction between −NH{sub 3}{sup +} and [PdCl{sub 4}]{sup 2−}. • Stable sorption/desorption performance shows a potential in further application. - Abstract: A novel, selective and acid-resisting chitosan fiber adsorbent was prepared by the ion-imprinting technique using Pd(II) and epichlorohydrin as the template and two-step crosslinking agent, respectively. The resulting ion-imprinted chitosan fibers (IIF) were used to selectively adsorb Pd(II) under extremely acidic synthetic metal solutions. The adsorption and selectivity performances of IIF including kinetics, isotherms, pH effects, and regeneration were investigated. Pd(II) rapidly adsorbed on the IIF within 100 min, achieving the adsorption equilibrium. The isotherm results showed that the maximum Pd(II) uptake on the IIF was maintained as 324.6–326.4 mg g{sup −1} in solutions containing single and multiple metals, whereas the Pd(II) uptake on non-imprinted fibers (NIF) decreased from 313.7 to 235.3 mg g{sup −1} in solution containing multiple metals. Higher selectivity coefficients values were obtained from the adsorption on the IIF, indicating a better Pd(II) selectivity. The amine group, supposedly the predominant adsorption site for Pd(II), was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The pH value played a significant role on the mechanism of the selective adsorption in the extremely acidic conditions. Furthermore, the stabilized performance for three cycles of sorption/desorption shows a potential for further large-scale applications.

Selective recovery of Pd(II) from extremely acidic solution using ion-imprinted chitosan fiber: Adsorption performance and mechanisms

International Nuclear Information System (INIS)

Lin, Shuo; Wei, Wei; Wu, Xiaohui; Zhou, Tao; Mao, Juan; Yun, Yeoung-Sang

2015-01-01

Highlights: • An acid-resisting chitosan fiber was prepared by ion-imprinting technique. • Pd(II) and ECH were as template and two-step crosslinking agent, respectively. • IIF showed a good adsorption and selectivity performance on Pd(II) solutions. • Selectivity was due to the electrostatic attraction between −NH_3"+ and [PdCl_4]"2"−. • Stable sorption/desorption performance shows a potential in further application. - Abstract: A novel, selective and acid-resisting chitosan fiber adsorbent was prepared by the ion-imprinting technique using Pd(II) and epichlorohydrin as the template and two-step crosslinking agent, respectively. The resulting ion-imprinted chitosan fibers (IIF) were used to selectively adsorb Pd(II) under extremely acidic synthetic metal solutions. The adsorption and selectivity performances of IIF including kinetics, isotherms, pH effects, and regeneration were investigated. Pd(II) rapidly adsorbed on the IIF within 100 min, achieving the adsorption equilibrium. The isotherm results showed that the maximum Pd(II) uptake on the IIF was maintained as 324.6–326.4 mg g"−"1 in solutions containing single and multiple metals, whereas the Pd(II) uptake on non-imprinted fibers (NIF) decreased from 313.7 to 235.3 mg g"−"1 in solution containing multiple metals. Higher selectivity coefficients values were obtained from the adsorption on the IIF, indicating a better Pd(II) selectivity. The amine group, supposedly the predominant adsorption site for Pd(II), was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The pH value played a significant role on the mechanism of the selective adsorption in the extremely acidic conditions. Furthermore, the stabilized performance for three cycles of sorption/desorption shows a potential for further large-scale applications.

Feature Selection for Chemical Sensor Arrays Using Mutual Information

Science.gov (United States)

Wang, X. Rosalind; Lizier, Joseph T.; Nowotny, Thomas; Berna, Amalia Z.; Prokopenko, Mikhail; Trowell, Stephen C.

2014-01-01

We address the problem of feature selection for classifying a diverse set of chemicals using an array of metal oxide sensors. Our aim is to evaluate a filter approach to feature selection with reference to previous work, which used a wrapper approach on the same data set, and established best features and upper bounds on classification performance. We selected feature sets that exhibit the maximal mutual information with the identity of the chemicals. The selected features closely match those found to perform well in the previous study using a wrapper approach to conduct an exhaustive search of all permitted feature combinations. By comparing the classification performance of support vector machines (using features selected by mutual information) with the performance observed in the previous study, we found that while our approach does not always give the maximum possible classification performance, it always selects features that achieve classification performance approaching the optimum obtained by exhaustive search. We performed further classification using the selected feature set with some common classifiers and found that, for the selected features, Bayesian Networks gave the best performance. Finally, we compared the observed classification performances with the performance of classifiers using randomly selected features. We found that the selected features consistently outperformed randomly selected features for all tested classifiers. The mutual information filter approach is therefore a computationally efficient method for selecting near optimal features for chemical sensor arrays. PMID:24595058

The accessory super-selective techniques in performing the transarterial embolization of intracranial dural arteriovenous fistulas

International Nuclear Information System (INIS)

Zhao Wenyuan; Liu Jianmin; Li Qiang; Fang Yibin; Xu Yi; Hong Bo; Huang Qinghai

2010-01-01

Objective: To evaluate the assistant techniques in performing transarterial embolization of intracranial dural arteriovenous fistulas (DAVF) when routine super-selective catheterization with microcatheter fails. Methods: Temporary balloon occlusion of the parent artery was adopted in 4 cases of anterior fossa DAVF and in one case of tentorial DAVF, and permanent occlusion of the distal main trunk with coils was carried out in one tentorial DAVF in order to help the super-selective catheterization. Results: The microcatheter was successfully advanced to, or near, the nidus with the help of these assistant techniques and all 6 cases were cured with single session. After the surgery no operation-related complications occurred. Conclusion: Our preliminary results indicate that the assistant techniques, including temporary balloon occlusion of the parent artery and permanent occlusion of the distal main trunk with coils, are a safe and effective method which can reliably help the successful performance of microcatheter catheterization, it can be safely used in complex cases when routine super-selective catheterization fails. (authors)

A Heckman Selection- t Model

KAUST Repository

Marchenko, Yulia V.

2012-03-01

Sample selection arises often in practice as a result of the partial observability of the outcome of interest in a study. In the presence of sample selection, the observed data do not represent a random sample from the population, even after controlling for explanatory variables. That is, data are missing not at random. Thus, standard analysis using only complete cases will lead to biased results. Heckman introduced a sample selection model to analyze such data and proposed a full maximum likelihood estimation method under the assumption of normality. The method was criticized in the literature because of its sensitivity to the normality assumption. In practice, data, such as income or expenditure data, often violate the normality assumption because of heavier tails. We first establish a new link between sample selection models and recently studied families of extended skew-elliptical distributions. Then, this allows us to introduce a selection-t (SLt) model, which models the error distribution using a Student\\'s t distribution. We study its properties and investigate the finite-sample performance of the maximum likelihood estimators for this model. We compare the performance of the SLt model to the conventional Heckman selection-normal (SLN) model and apply it to analyze ambulatory expenditures. Unlike the SLNmodel, our analysis using the SLt model provides statistical evidence for the existence of sample selection bias in these data. We also investigate the performance of the test for sample selection bias based on the SLt model and compare it with the performances of several tests used with the SLN model. Our findings indicate that the latter tests can be misleading in the presence of heavy-tailed data. © 2012 American Statistical Association.

Presence of bias in radiographer plain film reading performance studies

International Nuclear Information System (INIS)

Brealey, S.; Scally, A.J.; Thomas, N.B.

2002-01-01

Purpose To raise awareness of the frequency of bias that can affect the quality of radiographer plain film reading performance studies. Methods Studies that assessed radiographer(s) plain film reading performance were located by searching electronic databases and grey literature, hand-searching journals, personal communication and scanning reference lists. Thirty studies were judged eligible from all data sources. Results A one-way analysis of variance (ANOVA) demonstrates no statistically significant difference (P=0.25) in the mean proportion of biases present from diagnostic accuracy (0.37), performance (0.42) and outcome (0.44) study designs. Pearson's correlation coefficient showed no statistically significant linear association between the proportion of biases present for the three different study designs and the year that the study was performed. The frequency of biases in film and observer selection and application of the reference standard was quite low. In contrast, many biases were present concerning independence of film reporting and comparison of reports for concordance. Conclusions The findings indicate variation in the presence of bias in radiographer plain film reading performance studies. The careful consideration of bias is an essential component of study quality and hence the validity of the evidence-base used to underpin radiographic reporting policy

The Return-risk Performance of Selected Pension Fund in OECD with Focus on the Czech Pension System

OpenAIRE

Petr Kupčík; Pavel Gottwald

2016-01-01

This paper focuses on the measuring and comparing investment performance of pension funds in selected European countries. Comparison of the investment performance of pension funds is determined by means of the Sharpe ratio and the Sortino ratio. We used data of nominal appreciation of pension funds from the Czech Republic, Slovakia, Poland, Sweden, Switzerland and the Netherlands in the period 2005−2013. These countries were selected because they have many common features but Sweden, Switzerl...

Fatigue performance evaluation of selective laser melted Ti–6Al–4V

Energy Technology Data Exchange (ETDEWEB)

Edwards, P. [Boeing Research and Technology, The Boeing Company, Seattle, WA (United States); Ramulu, M., E-mail: ramulum@u.washington.edu [Department of Mechanical Engineering, University of Washington, Seattle, WA (United States)

2014-03-01

Additive Manufacturing of titanium components holds promise to deliver benefits such as reduced cost, weight and carbon emissions during both manufacture and use. To capitalize on these benefits, it must be shown that the mechanical performance of parts produced by Additive Manufacturing can meet design requirements that are typically based on wrought material performance properties. Of particular concern for safety critical structures are the fatigue properties of parts produced by Additive Manufacturing. This research evaluates the fatigue properties of Ti–6Al–4V specimens produced by the Selective Laser Melting additive manufacturing process. It was found that the fatigue life is significantly lower compared to wrought material. This reduction in fatigue performance was attributed to a variety of issues, such as microstructure, porosity, surface finish and residual stress. There was also found to be a high degree of anisotropy in the fatigue performance associated with the specimen build orientation.

Fatigue performance evaluation of selective laser melted Ti–6Al–4V

International Nuclear Information System (INIS)

Edwards, P.; Ramulu, M.

2014-01-01

Additive Manufacturing of titanium components holds promise to deliver benefits such as reduced cost, weight and carbon emissions during both manufacture and use. To capitalize on these benefits, it must be shown that the mechanical performance of parts produced by Additive Manufacturing can meet design requirements that are typically based on wrought material performance properties. Of particular concern for safety critical structures are the fatigue properties of parts produced by Additive Manufacturing. This research evaluates the fatigue properties of Ti–6Al–4V specimens produced by the Selective Laser Melting additive manufacturing process. It was found that the fatigue life is significantly lower compared to wrought material. This reduction in fatigue performance was attributed to a variety of issues, such as microstructure, porosity, surface finish and residual stress. There was also found to be a high degree of anisotropy in the fatigue performance associated with the specimen build orientation

Effect of material selection and background impurity on interface property and resulted CIP-GMR performance

International Nuclear Information System (INIS)

Peng Xilin; Morrone, Augusto; Nikolaev, Konstantin; Kief, Mark; Ostrowski, Mark

2009-01-01

In this paper, we investigated the effect of background base pressure, wafer-transferring time between process modules, and stack layer material selection on the current-in-plane giant magneto-resistive (CIP-GMR) interface properties and the resulted CIP-GMR performance. Experimental results showed that seed layer/AFM interface, AFM/pinned layer (PL) interface, pinned layer/Ru interface, and reference layer (RL)/Cu spacer interface are among the most critical ones for a CIP-GMR device. By reducing the background impurity level (water moisture and oxygen), optimizing the wafer process flow sequence, and careful stack-layer material selection, such critical interfaces in a CIP-GMR device can be preserved. Consequently, a much robust GMR performance control can be achieved.

Determinants Of Dividend Policy: A Study Of Selected Listed Firms In Nigeria

Directory of Open Access Journals (Sweden)

Uwuigbe Olubukunola Ranti

2013-05-01

Full Text Available This study investigated the determinants of dividends policy in the Nigerian stock exchange market. To achieve the objectives of this study, a total of 50 listed firms in the Nigerian stock exchange market were selected and analyzed for the study using the judgmental sampling technique. Also, the corporate annual reports for the period 2006-2011 were used for the study. The paper was basically modeled to examine the effects of financial performance of firms, firm size, financial leverage and board independence on the dividend payout decisions of listed firms operating in the Nigerian stock exchange market using the regression analysis method. The study in its findings observed that there is a significant positive relationship between firms’ financial performance, size of firms and board independence on the dividend payouts decisions of listed firms in Nigeria.

Exploring the Relationships Between Just-In-Time Technique and Manufacturing Performance: Empirical Evidence From Selected Nigerian Firms

OpenAIRE

Ph. D. John Kolade Obamiro

2009-01-01

This study explores the relationship between just-in-time technique and manufacturing performance of some selected Nigerian companies. Just-in time was considered to be an overall organisational phenomenon. Data were obtained through a structured questionnaire from a sample size of 300 knowledgeable employees to test the developed model and formulated hypotheses that cover both just-intime and the supporting infrastructures. Bivariate correlation analysis was used to test the three hypotheses...

Selection by mating competitiveness improves the performance of Anastrepha ludens males of the genetic sexing strain Tapachula-7.

Science.gov (United States)

Quintero-Fong, L; Toledo, J; Ruiz, L; Rendón, P; Orozco-Dávila, D; Cruz, L; Liedo, P

2016-10-01

The sexual performance of Anastrepha ludens males of the Tapachula-7 genetic sexing strain, produced via selection based on mating success, was compared with that of males produced without selection in competition with wild males. Mating competition, development time, survival, mass-rearing quality parameters and pheromone production were compared. The results showed that selection based on mating competitiveness significantly improved the sexual performance of offspring. Development time, survival of larvae, pupae and adults, and weights of larvae and pupae increased with each selection cycle. Differences in the relative quantity of the pheromone compounds (Z)-3-nonenol and anastrephin were observed when comparing the parental males with the F4 and wild males. The implications of this colony management method on the sterile insect technique are discussed.

An investigation on effective factors influencing employee performance: A case study

Directory of Open Access Journals (Sweden)

Hamid Reza Alavi

2013-06-01

Full Text Available Human resources are considered as one of the key components of any organization to reach its objectives. Human resources help organization performance doing organizational duties and making employees’ improvement. Because of this, employee performance appraisal has changed to one of the most important issues for top managers. Performance appraisal is necessary to select useful strategies for increasing productivity of human resource management along with productivity of employee to get strategic targets. In this study, we extract effective factors on increasing of employee performance and subsequently, present some suggestions to managers of academic organizations. The study was performed on some employees who worked for Islamic Azad University in 2013. Cronbach alpha was equal to 99.4% for employee performance appraisal, which confirmed the overall survey. To recognize key factors we used path analysis technique too. The results of the study revealed that in this school, employee performance in practical field was higher than expected, but in terms of operational and behavioral fields, they were in the middle stage.

Selection for Surgical Training: An Evidence-Based Review.

Science.gov (United States)

Schaverien, Mark V

2016-01-01

The predictive relationship between candidate selection criteria for surgical training programs and future performance during and at the completion of training has been investigated for several surgical specialties, however there is no interspecialty agreement regarding which selection criteria should be used. Better understanding the predictive reliability between factors at selection and future performance may help to optimize the process and lead to greater standardization of the surgical selection process. PubMed and Ovid MEDLINE databases were searched. Over 560 potentially relevant publications were identified using the search strategy and screened using the Cochrane Collaboration Data Extraction and Assessment Template. 57 studies met the inclusion criteria. Several selection criteria used in the traditional selection demonstrated inconsistent correlation with subsequent performance during and at the end of surgical training. The following selection criteria, however, demonstrated good predictive relationships with subsequent resident performance: USMLE examination scores, Letters of Recommendation (LOR) including the Medical Student Performance Evaluation (MSPE), academic performance during clinical clerkships, the interview process, displaying excellence in extracurricular activities, and the use of unadjusted rank lists. This systematic review supports that the current selection process needs to be further evaluated and improved. Multicenter studies using standardized outcome measures of success are now required to improve the reliability of the selection process to select the best trainees. Published by Elsevier Inc.

Performance of structured lipids incorporating selected phenolic and ascorbic acids.

Science.gov (United States)

Gruczynska, Eliza; Przybylski, Roman; Aladedunye, Felix

2015-04-15

Conditions applied during frying require antioxidant which is stable at these conditions and provides protection for frying oil and fried food. Novel structured lipids containing nutraceuticals and antioxidants were formed by enzymatic transesterification, exploring canola oil and naturally occurring antioxidants such as ascorbic and selected phenolic acids as substrates. Lipozyme RM IM lipase from Rhizomucor miehei was used as biocatalyst. Frying performance and oxidative stability of the final transesterification products were evaluated. The novel lipids showed significantly improved frying performance compared to canola oil. Oxidative stability assessment of the structured lipids showed significant improvement in resistance to oxidative deterioration compared to original canola oil. Interestingly, the presence of ascorbic acid in an acylglycerol structure protected α-tocopherol against thermal degradation, which was not observed for the phenolic acids. Developed structured lipids containing nutraceuticals and antioxidants may directly affect nutritional properties of lipids also offering nutraceutical ingredients for food formulation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Ultrathin and Ion-Selective Janus Membranes for High-Performance Osmotic Energy Conversion.

Science.gov (United States)

Zhang, Zhen; Sui, Xin; Li, Pei; Xie, Ganhua; Kong, Xiang-Yu; Xiao, Kai; Gao, Longcheng; Wen, Liping; Jiang, Lei

2017-07-05

The osmotic energy existing in fluids is recognized as a promising "blue" energy source that can help solve the global issues of energy shortage and environmental pollution. Recently, nanofluidic channels have shown great potential for capturing this worldwide energy because of their novel transport properties contributed by nanoconfinement. However, with respect to membrane-scale porous systems, high resistance and undesirable ion selectivity remain bottlenecks, impeding their applications. The development of thinner, low-resistance membranes, meanwhile promoting their ion selectivity, is a necessity. Here, we engineered ultrathin and ion-selective Janus membranes prepared via the phase separation of two block copolymers, which enable osmotic energy conversion with power densities of approximately 2.04 W/m 2 by mixing natural seawater and river water. Both experiments and continuum simulation help us to understand the mechanism for how membrane thickness and channel structure dominate the ion transport process and overall device performance, which can serve as a general guiding principle for the future design of nanochannel membranes for high-energy concentration cells.

Cognitive training and selective attention in the aging brain: an electrophysiological study.

Science.gov (United States)

O'Brien, Jennifer L; Edwards, Jerri D; Maxfield, Nathan D; Peronto, Carol L; Williams, Victoria A; Lister, Jennifer J

2013-11-01

Age-related deficits in selective attention are hypothesized to result from decrements in inhibition of task-irrelevant information. Speed of processing (SOP) training is an adaptive cognitive intervention designed to enhance processing speed for attention tasks. The effectiveness of SOP training to improve cognitive and everyday functional performance is well documented. However, underlying mechanisms of these training benefits are unknown. Participants completed a visual search task evaluated using event-related potentials (ERPs) before and after 10 weeks of SOP training or no contact. N2pc and P3b components were evaluated to determine SOP training effects on attentional resource allocation and capacity. Selective attention to a target was enhanced after SOP training compared to no training. N2pc and P3b amplitudes increased after training, reflecting attentional allocation and capacity enhancement, consistent with previous studies demonstrating behavioral improvements in selective attention following SOP training. Changes in ERPs related to attention allocation and capacity following SOP training support the idea that training leads to cognitive enhancement. Specifically, we provide electrophysiological evidence that SOP training may be successful in counteracting age-related declines in selective attention. This study provides important evidence of the underlying mechanisms by which SOP training improves cognitive function in older adults. Published by Elsevier Ireland Ltd.

Verification of dose rate calculation and selection study on low activation concrete in fusion facilities

International Nuclear Information System (INIS)

Oishi, Koji; Minami, Kiyoshi; Ikeda, Yujiro; Kosako, Kazuaki; Nakamura, Tomoo

1991-01-01

A concrete assembly was irradiated by D-T neutrons for 10 h, and dose rate measurement one day after shutdown has been carried out in order to provide a guide line for selection studies of low activation concrete. The experimental results were analyzed by the two dimensional calculation code DOT3.5 with its related nuclear data library GICX40 based on ENDF/B-III, however disagreement between experiment and calculation was observed in the deeper detector positions. Calculations were also performed using the nuclear data library based on ENDF/B-IV, and agreement within experimental errors was obtained at all detector positions. Selection studies for low activation concrete were performed using this nuclear data library. As a result, it was found that limestone concrete exhibited excellent properties as a low activation concrete in fusion facilities. (orig.)

Studies on selected organic-metal interactions of importance in the environment

International Nuclear Information System (INIS)

Mason, Ian.

1995-10-01

This research project investigated the interaction between natural organics acids and selected metal ions. The aims of the project was to provide quantitative data on the speciation of metal ions when placed in systems containing natural organic acids. It was envisaged that such data will assist in the risk assessment of the Drigg low level waste site in Cumbria. The formation and complexing ability of these natural organic acids is discussed and the classing of these acids into high molecular weight organic acids and low molecular weight organic acids. Initial investigations used a potentiometric technique to study the interaction between nickel and europium and selected low molecular weight organic acids which were thought to occur in significant concentrations in soils and groundwaters. These experiments confirmed existing critically assessed literature values, and provided an experimental methodology for further 'in-house' measurement of such values. In addition, studies were also performed on systems containing two competing organic acids. (author)

Data and Performances of Selected Aircraft and Rotocraft

DEFF Research Database (Denmark)

Filippone, Antonino

2000-01-01

The study reports a comparative view of over 250 aircraft and rotorcraft. We report over 30 geometric characteristics of wings and rotor blades, aerodynamic coefficients and efficiencies, performances and more. Accuracy levels are provided whereever available......The study reports a comparative view of over 250 aircraft and rotorcraft. We report over 30 geometric characteristics of wings and rotor blades, aerodynamic coefficients and efficiencies, performances and more. Accuracy levels are provided whereever available...

FINANCIAL PERFORMANCE VERSUS NON FINANCIAL PERFORMANCE. CASE STUDY AT ANTIBIOTICE TRADING COMPANY IASI

Directory of Open Access Journals (Sweden)

Beleneºi Mãrioara

2012-07-01

Full Text Available The actual economical conditions, the effect of global crisis and the efforts to pass this turning point, does force trading companies toward an extremely balanced management of performance. Now, when financial indicators are neither so spectacular nor so relevant, and when the principles of a durable development are mentioned over and over, the exigencies of companies’ external environment are higher and higher. This reality does force the companies to pay more attention to social responsibilities’ assuming and investment into green innovation, as well as to the field of information’s communication in a relevant way, which should gather financial, social and environment information. The absence of a normalized balance of financial and non-financial indicators used in measuring companies’ global performance, does allow them selecting of “agreed” indicators which should reflect the company under the light of high performance. But, the same reason urges the searcher for some research studies of the most adequate diagnostic model of global performance, which should faithfully reflect company’s current status. The purpose of this study is to measure the global performance of ANTIBIOTICE Trading Company, taking into account, both financial and non-financial indicators for a period of 5 years. For the financial years 2006 and 2008 company’s global performance is an acceptable one, while for the financial years 2007, 2009 and 2010 the global performance is a medium one. It should be highlighted the lack of involvement or transparency regarding social and environment responsibility in 2006 and weak financial performance in 2008, indicators which positioned the company to an acceptable level.

Synchronous scanning phosphorimetry for the selective determination of chrysene: a metrological study

Directory of Open Access Journals (Sweden)

Alessandra L. M. C. da Cunha

2010-01-01

Full Text Available Room-temperature phosphorimetry was used to quantify trace levels of chrysene in sugar-cane spirits and in fish bile. A selective phosphorescence enhancer (AgNO3 and synchronous scanning allowed the detection of ng amounts of chrysene. Accuracy (113 ± 17% and selectivity was evaluated using the CRM-NIST-1647d - Priority Pollutant Polycyclic Aromatic Hydrocarbons in acetonitrile. Analysis of sugar-cane spirit samples enabled recovery of 108 ± 18% which agreed with the one achieved using HPLC. Method's uncertainty was equivalent to 3.4 ng of the analyte, however, the analyte pre-concentration (SPE improved sensibility and minimized the relative uncertainty. Characterization and homogeneity studies in fish bile were also performed.

Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings

Science.gov (United States)

Kamal, Rajeev

Buildings contribute a significant part to the electricity demand profile and peak demand for the electrical utilities. The addition of renewable energy generation adds additional variability and uncertainty to the power system. Demand side management in the buildings can help improve the demand profile for the utilities by shifting some of the demand from peak to off-peak times. Heating, ventilation and air-conditioning contribute around 45% to the overall demand of a building. This research studies two strategies for reducing the peak as well as shifting some demand from peak to off-peak periods in commercial buildings: 1. Use of gas heat pumps in place of electric heat pumps, and 2. Shifting demand for air conditioning from peak to off-peak by thermal energy storage in chilled water and ice. The first part of this study evaluates the field performance of gas engine-driven heat pumps (GEHP) tested in a commercial building in Florida. Four GEHP units of 8 Tons of Refrigeration (TR) capacity each providing air-conditioning to seven thermal zones in a commercial building, were instrumented for measuring their performance. The operation of these GEHPs was recorded for ten months, analyzed and compared with prior results reported in the literature. The instantaneous COPunit of these systems varied from 0.1 to 1.4 during typical summer week operation. The COP was low because the gas engines for the heat pumps were being used for loads that were much lower than design capacity which resulted in much lower efficiencies than expected. The performance of equivalent electric heat pump was simulated from a building energy model developed to mimic the measured building loads. An economic comparison of GEHPs and conventional electrical heat pumps was done based on the measured and simulated results. The average performance of the GEHP units was estimated to lie between those of EER-9.2 and EER-11.8 systems. The performance of GEHP systems suffers due to lower efficiency at

A study of metaheuristic algorithms for high dimensional feature selection on microarray data

Science.gov (United States)

Dankolo, Muhammad Nasiru; Radzi, Nor Haizan Mohamed; Sallehuddin, Roselina; Mustaffa, Noorfa Haszlinna

2017-11-01

Microarray systems enable experts to examine gene profile at molecular level using machine learning algorithms. It increases the potentials of classification and diagnosis of many diseases at gene expression level. Though, numerous difficulties may affect the efficiency of machine learning algorithms which includes vast number of genes features comprised in the original data. Many of these features may be unrelated to the intended analysis. Therefore, feature selection is necessary to be performed in the data pre-processing. Many feature selection algorithms are developed and applied on microarray which including the metaheuristic optimization algorithms. This paper discusses the application of the metaheuristics algorithms for feature selection in microarray dataset. This study reveals that, the algorithms have yield an interesting result with limited resources thereby saving computational expenses of machine learning algorithms.

Irradiation Performance of U-Mo Alloy Based ‘Monolithic’ Plate-Type Fuel – Design Selection

Energy Technology Data Exchange (ETDEWEB)

A. B. Robinson; G. S. Chang; D. D. Keiser, Jr.; D. M. Wachs; D. L. Porter

2009-08-01

A down-selection process has been applied to the U-Mo fuel alloy based monolithic plate fuel design, supported by irradiation testing of small fuel plates containing various design parameters. The irradiation testing provided data on fuel performance issues such as swelling, fuel-cladding interaction (interdiffusion), blister formation at elevated temperatures, and fuel/cladding bond quality and effectiveness. U-10Mo (wt%) was selected as the fuel alloy of choice, accepting a somewhat lower uranium density for the benefits of phase stability. U-7Mo could be used, with a barrier, where the trade-off for uranium density is critical to nuclear performance. A zirconium foil barrier between fuel and cladding was chosen to provide a predictable, well-bonded, fuel-cladding interface, allowing little or no fuel-cladding interaction. The fuel plate testing conducted to inform this selection was based on the use of U-10Mo foils fabricated by hot co-rolling with a Zr foil. The foils were subsequently bonded to Al-6061 cladding by hot isostatic pressing or friction stir bonding.

Mechanism study of selective heavy metal ion removal with polypyrrole-functionalized polyacrylonitrile nanofiber mats

International Nuclear Information System (INIS)

Wang, Jianqiang; Luo, Chao; Qi, Genggeng; Pan, Kai; Cao, Bing

2014-01-01

Graphical abstract: - Highlights: • PAN/PPy core/shell nanofiber used for Cr(VI) removal. • Adsorption mechanisms were investigated. • Selective adsorption performances were investigated. - Abstract: Polyacrylonitrile/polypyrrole (PAN/PPy) core/shell nanofiber mat was prepared through electrospinning followed by a simple chemical oxidation method. The polypyrrole-functionalized nanofiber mats showed selective adsorption performance for anions. The interaction between heavy metal anions and polypyrrole (especially the interaction between Cr 2 O 7 2− and polypyrrole) during the adsorption process was studied. The results showed that the adsorption process included two steps: one was the anion exchange process between the Cl − and Cr(VI), and the other was the redox process for the Cr(VI) ions. The adsorption amount was related to the protonation time of the PAN/PPy nanofiber mat and increased as protonation time increased. Meanwhile, the Cr(VI) ions were reduced to Cr(III) through the reaction with amino groups of polypyrrole (from secondary amines to tertiary amines). PAN/PPy nanofiber mat showed high selectivity for Cr(VI), and the adsorption performance was nearly unaffected by other co-existing anions (Cl − , NO 3 − , and SO 4 2− ) except for PO 4 3− for the pH change

Effects of selective activation of M1 and M4 muscarinic receptors on object recognition memory performance in rats.

Science.gov (United States)

Galloway, Claire R; Lebois, Evan P; Shagarabi, Shezza L; Hernandez, Norma A; Manns, Joseph R

2014-01-01

Acetylcholine signaling through muscarinic receptors has been shown to benefit memory performance in some conditions, but pan-muscarinic activation also frequently leads to peripheral side effects. Drug therapies that selectively target M1 or M4 muscarinic receptors could potentially improve memory while minimizing side effects mediated by the other muscarinic receptor subtypes. The ability of three recently developed drugs that selectively activate M1 or M4 receptors to improve recognition memory was tested by giving Long-Evans rats subcutaneous injections of three different doses of the M1 agonist VU0364572, the M1 positive allosteric modulator BQCA or the M4 positive allosteric modulator VU0152100 before performing an object recognition memory task. VU0364572 at 0.1 mg/kg, BQCA at 1.0 mg/kg and VU0152100 at 3.0 and 30.0 mg/kg improved the memory performance of rats that performed poorly at baseline, yet the improvements in memory performance were the most statistically robust for VU0152100 at 3.0 mg/kg. The results suggested that selective M1 and M4 receptor activation each improved memory but that the likelihood of obtaining behavioral efficacy at a given dose might vary between subjects even in healthy groups depending on baseline performance. These results also highlighted the potential of drug therapies that selectively target M1 or M4 receptors to improve memory performance in individuals with impaired memory.

Sex-selective abortion in Nepal: a qualitative study of health workers' perspectives.

Science.gov (United States)

Lamichhane, Prabhat; Harken, Tabetha; Puri, Mahesh; Darney, Philip D; Blum, Maya; Harper, Cynthia C; Henderson, Jillian T

2011-01-01

Sex-selective abortion is expressly prohibited in Nepal, but limited evidence suggests that it occurs nevertheless. Providers' perspectives on sex-selective abortion were examined as part of a larger study on legal abortion in the public sector in Nepal. In-depth interviews were conducted with health care providers and administrators providing abortion services at four major hospitals (n = 35), two in the Kathmandu Valley and two in outlying rural areas. A grounded theory approach was used to code interview transcripts and to identify themes in the data. Most providers were aware of the ban on sex-selective abortion and, despite overall positive views of abortion legalization, saw sex selection as an increasing problem. Greater availability of abortion and ultrasonography, along with the high value placed on sons, were seen as contributing factors. Providers wanted to perform abortions for legal indications, but described challenges identifying sex-selection cases. Providers also believed that illegal sex-selective procedures contribute to serious abortion complications. Sex-selective abortion complicates the provision of legal abortion services. In addition to the difficulty of determining which patients are seeking abortion for sex selection, health workers are aware of the pressures women face to bear sons and know they may seek unsafe services elsewhere when unable to obtain abortions in public hospitals. Legislative, advocacy, and social efforts aimed at promoting gender equality and women's human rights are needed to reduce the cultural and economic pressures for sex-selective abortion, because providers alone cannot prevent the practice. Copyright © 2011 Jacobs Institute of Women's Health. Published by Elsevier Inc. All rights reserved.

Engineering study of generic site criteria for selected DOE plutonium facilities

International Nuclear Information System (INIS)

Kingsbury, R.J.; Greenwood, J.M.; Sandoval, M.D.

1980-09-01

The objectives of this study were to identify criteria that would be applied to selection of a site for plutonium facilities such as those at the Rocky Flats Plant, to establish the relative importance of these criteria, and to identify suitable areas within the United States for location of plutonium facilities with respect to these criteria. Sources of the site criteria identified include federal laws, federal agency regulations, state laws and regulations, and requirements associated with operations to be performed at the site. The criteria identified during the study were organized into 14 major categories. The relative importnace of each category and each criterion within the categories were established using group decision-making techniques. The major criteria categories, their assigned weight on a scale of 1 to 10, and their relative priority ranks are as follows: geology/seismicity; public safety; environmental impact; meteorology; hydrology; topography; transportation; utilities; personnel; safeguards/security; land area and availability; land use compatibility; and, public acceptance. A suitability analysis of the continental United States was performed using only those criteria that could be mapped at a national scale. Suitability was assessed with respect to each of these criteria, and individual suitability maps were prepared. A composite suitability map was generated using computerized overlay techniques. This map provides a starting point for identifying specific candidate sites if an actual site selection were to be conducted

Habitat selection, facilitation, and biotic settlement cues affect distribution and performance of coral recruits in French Polynesia.

Science.gov (United States)

Price, Nichole

2010-07-01

Habitat selection can determine the distribution and performance of individuals if the precision with which sites are chosen corresponds with exposure to risks or resources. Contrastingly, facilitation can allow persistence of individuals arriving by chance and potentially maladapted to local abiotic conditions. For marine organisms, selection of a permanent attachment site at the end of their larval stage or the presence of a facilitator can be a critical determinant of recruitment success. In coral reef ecosystems, it is well known that settling planula larvae of reef-building corals use coarse environmental cues (i.e., light) for habitat selection. Although laboratory studies suggest that larvae can also use precise biotic cues produced by crustose coralline algae (CCA) to select attachment sites, the ecological consequences of biotic cues for corals are poorly understood in situ. In a field experiment exploring the relative importance of biotic cues and variability in habitat quality to recruitment of hard corals, pocilloporid and acroporid corals recruited more frequently to one species of CCA, Titanoderma prototypum, and significantly less so to other species of CCA; these results are consistent with laboratory assays from other studies. The provision of the biotic cue accurately predicted coral recruitment rates across habitats of varying quality. At the scale of CCA, corals attached to the "preferred" CCA experienced increased survivorship while recruits attached elsewhere had lower colony growth and survivorship. For reef-building corals, the behavioral selection of habitat using chemical cues both reduces the risk of incidental mortality and indicates the presence of a facilitator.

STUDY CONCERNING THE ELABORATION OF CERTAIN ORIENTATION MODELS AND THE INITIAL SELECTION FOR SPEED SKATING

Directory of Open Access Journals (Sweden)

Vaida Marius

2009-12-01

Full Text Available In realizing this study I started from the premise that, by elaborating certain orientation models and initial selection for the speed skating and their application will appear superior results, necessary results, taking into account the actual evolution of the high performance sport in general and of the speed skating, in special.The target of this study has been the identification of an orientation model and a complete initial selection that should be based on the favorable aptitudes of the speed skating. On the basis of the made researched orientation models and initial selection has been made, things that have been demonstrated experimental that are not viable, the study starting from the data of the 120 copies, the complete experiment being made by 32 subjects separated in two groups, one using the proposed model and the other formed fromsubjects randomly selected.These models can serve as common working instruments both for the orientation process and for the initial selection one, being able to integrate in the proper practical activity, these being used easily both by coaches that are in charge with the proper selection of the athletes but also by the physical education teachers orschool teachers that are in contact with children of an early age.

Novel Integrated Multi-Criteria Model for Supplier Selection: Case Study Construction Company

Directory of Open Access Journals (Sweden)

Željko Stević

2017-11-01

Full Text Available Supply chain presents a very complex field involving a large number of participants. The aim of the complete supply chain is finding an optimum from the aspect of all participants, which is a rather complex task. In order to ensure optimum satisfaction for all participants, it is necessary that the beginning phase consists of correct evaluations and supplier selection. In this study, the supplier selection was performed in the construction company, on the basis of a new approach in the field of multi-criteria model. Weight coefficients were obtained by DEMATEL (Decision Making Trial and Evaluation Laboratory method, based on the rough numbers. Evaluation and the supplier selection were made on the basis of a new Rough EDAS (Evaluation based on Distance from Average Solution method, which presents one of the latest methods in this field. In order to determine the stability of the model and the applicability of the proposed Rough EDAS method, an extension of the COPRAS and MULTIMOORA method by rough numbers was also performed in this study, and the findings of the comparative analysis were presented. Besides the new approaches based on the extension by rough numbers, the results are also compared with the Rough MABAC (MultiAttributive Border Approximation area Comparison and Rough MAIRCA (MultiAttributive Ideal-Real Comparative Analysis. In addition, in the sensitivity analysis, 18 different scenarios were formed, the ones in which criteria change their original values. At the end of the sensitivity analysis, SCC (Spearman Correlation Coefficient of the obtained ranges was carried out, confirming the applicability of the proposed approaches.

Outage performance of Decode-and-Forward partial selection in Nakagami-m fading channels

KAUST Repository

Benjillali, Mustapha

2010-01-01

In this paper, we investigate the outage performance of Decode-and-Forward with partial selection relaying in dualhop cooperative Nakagami-m fading links. The source, based on the unique knowledge of local first hop channel state information, selects the best relay to increase the chances of successful decoding and hence the possibility of cooperation when the direct link is also available. After deriving the exact distribution of the sum of two gamma variates with the same shape parameter, the outage probability of the system-with and without the direct link-is obtained in closed-form. We also derive the ε-outage capacity in different particular cases, and the obtained results- when the channel model is reduced to a Rayleigh fading-are either new or correspond to those previously obtained in other works. Simulation results confirm the accuracy of our analysis for a large selection of system and fading parameters. © 2009 IEEE.

Performance analysis of a threshold-based parallel multiple beam selection scheme for WDM-based systems for Gamma-Gamma distributions

KAUST Repository

Nam, Sung Sik

2017-03-02

In this paper, we statistically analyze the performance of a threshold-based parallel multiple beam selection scheme (TPMBS) for Free-space optical (FSO) based system with wavelength division multiplexing (WDM) in cases where a pointing error has occurred for practical consideration over independent identically distributed (i.i.d.) Gamma-Gamma fading conditions. Specifically, we statistically analyze the characteristics in operation under conventional heterodyne detection (HD) scheme for both adaptive modulation (AM) case in addition to non-AM case (i.e., coherentnon-coherent binary modulation). Then, based on the statistically derived results, we evaluate the outage probability (CDF) of a selected beam, the average spectral efficiency (ASE), the average number of selected beams (ANSB), and the average bit error rate (BER). Some selected results shows that we can obtain the higher spectral efficiency and simultaneously reduce the potential increasing of the complexity of implementation caused by applying the selection based beam selection scheme without a considerable performance loss.

The performance of an automatic acoustic-based program classifier compared to hearing aid users' manual selection of listening programs.

Science.gov (United States)

Searchfield, Grant D; Linford, Tania; Kobayashi, Kei; Crowhen, David; Latzel, Matthias

2018-03-01

To compare preference for and performance of manually selected programmes to an automatic sound classifier, the Phonak AutoSense OS. A single blind repeated measures study. Participants were fit with Phonak Virto V90 ITE aids; preferences for different listening programmes were compared across four different sound scenarios (speech in: quiet, noise, loud noise and a car). Following a 4-week trial preferences were reassessed and the users preferred programme was compared to the automatic classifier for sound quality and hearing in noise (HINT test) using a 12 loudspeaker array. Twenty-five participants with symmetrical moderate-severe sensorineural hearing loss. Participant preferences of manual programme for scenarios varied considerably between and within sessions. A HINT Speech Reception Threshold (SRT) advantage was observed for the automatic classifier over participant's manual selection for speech in quiet, loud noise and car noise. Sound quality ratings were similar for both manual and automatic selections. The use of a sound classifier is a viable alternative to manual programme selection.

Case Study of Using High Performance Commercial Processors in a Space Environment

Science.gov (United States)

Ferguson, Roscoe C.; Olivas, Zulema

2009-01-01

The purpose of the Space Shuttle Cockpit Avionics Upgrade project was to reduce crew workload and improve situational awareness. The upgrade was to augment the Shuttle avionics system with new hardware and software. A major success of this project was the validation of the hardware architecture and software design. This was significant because the project incorporated new technology and approaches for the development of human rated space software. An early version of this system was tested at the Johnson Space Center for one month by teams of astronauts. The results were positive, but NASA eventually cancelled the project towards the end of the development cycle. The goal to reduce crew workload and improve situational awareness resulted in the need for high performance Central Processing Units (CPUs). The choice of CPU selected was the PowerPC family, which is a reduced instruction set computer (RISC) known for its high performance. However, the requirement for radiation tolerance resulted in the reevaluation of the selected family member of the PowerPC line. Radiation testing revealed that the original selected processor (PowerPC 7400) was too soft to meet mission objectives and an effort was established to perform trade studies and performance testing to determine a feasible candidate. At that time, the PowerPC RAD750s where radiation tolerant, but did not meet the required performance needs of the project. Thus, the final solution was to select the PowerPC 7455. This processor did not have a radiation tolerant version, but faired better than the 7400 in the ability to detect failures. However, its cache tags did not provide parity and thus the project incorporated a software strategy to detect radiation failures. The strategy was to incorporate dual paths for software generating commands to the legacy Space Shuttle avionics to prevent failures due to the softness of the upgraded avionics.

SELECTION OF PROJECT MANAGERS IN CONSTRUCTION FIRMS USING ANALYTIC HIERARCHY PROCESS (AHP AND FUZZY TOPSIS: A CASE STUDY

Directory of Open Access Journals (Sweden)

Fatemeh Torfi

2011-10-01

Full Text Available Selecting a project manager is a major decision for every construction company. Traditionally, a project manager is selected by interviewing applicants and evaluating their capabilities by considering the special requirements of the project. The interviews are usually conducted by senior managers, and the selection of the best candidate depends on their opinions. Thus, the results may not be completely reliable. Moreover, conducting interviews for a large group of candidates is time-consuming. Thus, there is a need for computational models that can be used to select the most suitable applicant, given the project specifications and the applicants’ details. In this paper, a case study is performed in which a Fuzzy Multiple Criteria Decision Making (FMCDM model is used to select the best candidate for the post of project manager in a large construction firm. First, with the opinions of the senior managers, all the criteria and sub-criteria required for the selection are gathered, and the criteria priorities are qualitatively specified. Then, the applicants are ranked using the Analytic Hierarchy Process (AHP, approximate weights of the criteria, and fuzzy technique for order performance by similarity to ideal solution (TOPSIS. The results of the case study are shown to be satisfactory.

Statistical power of model selection strategies for genome-wide association studies.

Directory of Open Access Journals (Sweden)

Zheyang Wu

2009-07-01

Full Text Available Genome-wide association studies (GWAS aim to identify genetic variants related to diseases by examining the associations between phenotypes and hundreds of thousands of genotyped markers. Because many genes are potentially involved in common diseases and a large number of markers are analyzed, it is crucial to devise an effective strategy to identify truly associated variants that have individual and/or interactive effects, while controlling false positives at the desired level. Although a number of model selection methods have been proposed in the literature, including marginal search, exhaustive search, and forward search, their relative performance has only been evaluated through limited simulations due to the lack of an analytical approach to calculating the power of these methods. This article develops a novel statistical approach for power calculation, derives accurate formulas for the power of different model selection strategies, and then uses the formulas to evaluate and compare these strategies in genetic model spaces. In contrast to previous studies, our theoretical framework allows for random genotypes, correlations among test statistics, and a false-positive control based on GWAS practice. After the accuracy of our analytical results is validated through simulations, they are utilized to systematically evaluate and compare the performance of these strategies in a wide class of genetic models. For a specific genetic model, our results clearly reveal how different factors, such as effect size, allele frequency, and interaction, jointly affect the statistical power of each strategy. An example is provided for the application of our approach to empirical research. The statistical approach used in our derivations is general and can be employed to address the model selection problems in other random predictor settings. We have developed an R package markerSearchPower to implement our formulas, which can be downloaded from the

The Return-risk Performance of Selected Pension Fund in OECD with Focus on the Czech Pension System

Directory of Open Access Journals (Sweden)

Petr Kupčík

2016-01-01

Full Text Available This paper focuses on the measuring and comparing investment performance of pension funds in selected European countries. Comparison of the investment performance of pension funds is determined by means of the Sharpe ratio and the Sortino ratio. We used data of nominal appreciation of pension funds from the Czech Republic, Slovakia, Poland, Sweden, Switzerland and the Netherlands in the period 2005−2013. These countries were selected because they have many common features but Sweden, Switzerland and the Netherlands were added to the analysis because we wanted to show the differences between a developed and less developed fully funded system. The last part of this article presents the main causes of the differences in investment performance of pension funds. Conclusions of the paper are focused on a comparison of the results of the Sharpe ratio and the Sortino ratio of pension funds from selected countries and recommendations for the Czech pension system. The article proposes a mechanism for determining the order of the negative Sharpe ratio and the Sortino ratio.

Disappointing performance of literature-derived selective screening criteria for asymptomatic Chlamydia trachomatis infection in an inner-city population

NARCIS (Netherlands)

van Valkengoed, I G; Boeke, A J; Morré, S A; van den Brule, A J; Meijer, C J; Devillé, W; Bouter, L M

2000-01-01

BACKGROUND: In an inner-city population with a low prevalence of Chlamydia trachomatis infection, selective screening may be indicated to increase the efficiency of screening. GOAL: To evaluate the performance of sets of selective screening criteria for asymptomatic Chlamydia trachomatis infection

Measuring the performance of mutual funds: A case study

Directory of Open Access Journals (Sweden)

Jakšić Milena

2015-01-01

Full Text Available In this paper we evaluate the performance of eight open-end mutual funds in the Republic of Serbia for the period 2009-2012, with the aim of testing the justification of active portfolio management of mutual funds, and determining the selection capability of Serbian portfolio managers. Risk-weighted returns of mutual funds are compared with the risk-weighted return of the leading Belgrade Stock Exchange index, Belex15, whereas the following are used as performance measures: Sharpe ratio (Si, Treynor ratio (Ti, and Jensen's or Alpha index (αi. The results suggest that the portfolio of Serbian mutual funds has inferior performance compared to the market portfolio, which indicates the lack of selection capabilities of domestic portfolio managers.

THE STUDY OF RELATIONSHIP BETWEEN SOCIAL INTELLIGENCE AND ORGANIZATIONAL PERFORMANCE (CASE STUDY: ARDABIL REGIONAL WATER COMPANY'S MANAGERS

Directory of Open Access Journals (Sweden)

Habib Ebrahimpoor‎

2013-06-01

Full Text Available The aim of this study was to investigate the relationships among dimensions of social intelligence, social skills, social information processing, social awareness, social desirability of organizational performance. Methods: This research was a descriptive study. The population in this study comprised all experts, assistants and managers of regional water companies in Ardabil province, and was about 164 randomly selected people. And to gather data from field methods the means of questionnaires were used. Tromso questionnaire was chosen and designed to measure social intelligence and organizational performance by assessing specific questions about Balanced Scorecard as independent variable. To achieve the multiplier effect of each variable on the dependent variable, Pearson correlation test was performed. Results indicated that social skills, social information processing, social awareness and social desirability of improving organizational performance had the most important part in social information processing, and social awareness and social skills played a secondary role in improving performance.

Financial performance as a decision criterion of credit scoring models selection [doi: 10.21529/RECADM.2017004

Directory of Open Access Journals (Sweden)

Rodrigo Alves Silva

2017-09-01

Full Text Available This paper aims to show the importance of the use of financial metrics in decision-making of credit scoring models selection. In order to achieve such, we considered an automatic approval system approach and we carried out a performance analysis of the financial metrics on the theoretical portfolios generated by seven credit scoring models based on main statistical learning techniques. The models were estimated on German Credit dataset and the results were analyzed based on four metrics: total accuracy, error cost, risk adjusted return on capital and Sharpe index. The results show that total accuracy, widely used as a criterion for selecting credit scoring models, is unable to select the most profitable model for the company, indicating the need to incorporate financial metrics into the credit scoring model selection process. Keywords Credit risk; Model’s selection; Statistical learning.

Comparative study of SVM methods combined with voxel selection for object category classification on fMRI data.

Science.gov (United States)

Song, Sutao; Zhan, Zhichao; Long, Zhiying; Zhang, Jiacai; Yao, Li

2011-02-16

Support vector machine (SVM) has been widely used as accurate and reliable method to decipher brain patterns from functional MRI (fMRI) data. Previous studies have not found a clear benefit for non-linear (polynomial kernel) SVM versus linear one. Here, a more effective non-linear SVM using radial basis function (RBF) kernel is compared with linear SVM. Different from traditional studies which focused either merely on the evaluation of different types of SVM or the voxel selection methods, we aimed to investigate the overall performance of linear and RBF SVM for fMRI classification together with voxel selection schemes on classification accuracy and time-consuming. Six different voxel selection methods were employed to decide which voxels of fMRI data would be included in SVM classifiers with linear and RBF kernels in classifying 4-category objects. Then the overall performances of voxel selection and classification methods were compared. Results showed that: (1) Voxel selection had an important impact on the classification accuracy of the classifiers: in a relative low dimensional feature space, RBF SVM outperformed linear SVM significantly; in a relative high dimensional space, linear SVM performed better than its counterpart; (2) Considering the classification accuracy and time-consuming holistically, linear SVM with relative more voxels as features and RBF SVM with small set of voxels (after PCA) could achieve the better accuracy and cost shorter time. The present work provides the first empirical result of linear and RBF SVM in classification of fMRI data, combined with voxel selection methods. Based on the findings, if only classification accuracy was concerned, RBF SVM with appropriate small voxels and linear SVM with relative more voxels were two suggested solutions; if users concerned more about the computational time, RBF SVM with relative small set of voxels when part of the principal components were kept as features was a better choice.

Comparative economic performance of selected passive solar heating and cooling technologies

Science.gov (United States)

Rutter, W.

1981-05-01

The economic performance of selected passive solar heating and cooling technologies which incorporate energy storage is assessed by using a set of uniform assumptions and methodologies. Where data are available, a given system is assessed at more than one geographical location. Results are obtained in the form of both payback period and net present value for residential applications, and in terms of net present value only for industrial/commercial uses. Results indicate that ventilated trombe walls, solar roof ponds, and certain night effect/floor storage strategies are cost effective, but night effect/rock bed cooling is not. Results also show that, although direct gain out-performs trombe walls in most parts of the country, both direct gain and trombe walls usually produce a net savings in the residential sector. Generally, however, tax regulations result in net economic loss for direct gain and trombe walls used to heat industrial and commercial buildings.

Performance Analysis of a Threshold-Based Parallel Multiple Beam Selection Scheme for WDM FSO Systems

KAUST Repository

Nam, Sung Sik; Alouini, Mohamed-Slim; Ko, Young-Chai

2018-01-01

In this paper, we statistically analyze the performance of a threshold-based parallel multiple beam selection scheme for a free-space optical (FSO) based system with wavelength division multiplexing (WDM) in cases where a pointing error has occurred

Trial application of PRATOOL: Performance of sensitivity studies on service water systems

International Nuclear Information System (INIS)

Gregg, R.E.; Wood, S.T.

1991-03-01

PRATOOL is a computer program developed to supplement the Integrated Reliability and Risk Analysis System (IRRAS) probabilistic risk assessment (PRA) computer program. It is intended to be a tool for performing PRA sensitivity analyses. This will allow a PRA's results to be easily reevaluated to show its sensitivity to changing parameter (system, component type, basic event, etc.) values (i.e., failure rates). This report documents a trial application of PRATOOL. It evaluates the sensitivity of core damage frequency to service water system availability at several nuclear power plants. For the purpose of this trail application of PRATOOL, service water system sensitivity studies were performed using the results of several NUREG- 1150 PRAs. These plants were chosen because their PRAs were already loaded into the IRRAS data base. Therefore, they are readily available for this type of study. PRATOOL contains a small subset of the functions provided by IRRAS. The user can select sets of parameters that will act as the bases for sensitivity analyses. Depending on the PRA used, the parameters selected can include: systems, component types, trains, locations, failure modes, and basic events. It will also perform and AND-ing operation on selected parameters. This allows the user define any number of possible combinations of parameters. The results of the four sensitivity studies would tend to indicate that the SWS availability is important for BWRs but unimportant for PWRs. Both BWRs showed significant increases in CDF if their SWS failure rates are allowed to increase. From the results of the four sensitivity studies, it is interesting to note that no improvements made to any of the SWSs' failure rates would result in a significant decrease on CDF. 10 figs

A Comparative Study of Feature Selection and Classification Methods for Gene Expression Data of Glioma

KAUST Repository

Abusamra, Heba

2013-11-01

Microarray gene expression data gained great importance in recent years due to its role in disease diagnoses and prognoses which help to choose the appropriate treatment plan for patients. This technology has shifted a new era in molecular classification. Interpreting gene expression data remains a difficult problem and an active research area due to their native nature of “high dimensional low sample size”. Such problems pose great challenges to existing classification methods. Thus, effective feature selection techniques are often needed in this case to aid to correctly classify different tumor types and consequently lead to a better understanding of genetic signatures as well as improve treatment strategies. This paper aims on a comparative study of state-of-the- art feature selection methods, classification methods, and the combination of them, based on gene expression data. We compared the efficiency of three different classification methods including: support vector machines, k-nearest neighbor and random forest, and eight different feature selection methods, including: information gain, twoing rule, sum minority, max minority, gini index, sum of variances, t-statistics, and one-dimension support vector machine. Five-fold cross validation was used to evaluate the classification performance. Two publicly available gene expression data sets of glioma were used in the experiments. Results revealed the important role of feature selection in classifying gene expression data. By performing feature selection, the classification accuracy can be significantly boosted by using a small number of genes. The relationship of features selected in different feature selection methods is investigated and the most frequent features selected in each fold among all methods for both datasets are evaluated.

A Comparative Study of Feature Selection and Classification Methods for Gene Expression Data of Glioma

KAUST Repository

Abusamra, Heba

2013-01-01

Microarray gene expression data gained great importance in recent years due to its role in disease diagnoses and prognoses which help to choose the appropriate treatment plan for patients. This technology has shifted a new era in molecular classification. Interpreting gene expression data remains a difficult problem and an active research area due to their native nature of “high dimensional low sample size”. Such problems pose great challenges to existing classification methods. Thus, effective feature selection techniques are often needed in this case to aid to correctly classify different tumor types and consequently lead to a better understanding of genetic signatures as well as improve treatment strategies. This paper aims on a comparative study of state-of-the- art feature selection methods, classification methods, and the combination of them, based on gene expression data. We compared the efficiency of three different classification methods including: support vector machines, k-nearest neighbor and random forest, and eight different feature selection methods, including: information gain, twoing rule, sum minority, max minority, gini index, sum of variances, t-statistics, and one-dimension support vector machine. Five-fold cross validation was used to evaluate the classification performance. Two publicly available gene expression data sets of glioma were used in the experiments. Results revealed the important role of feature selection in classifying gene expression data. By performing feature selection, the classification accuracy can be significantly boosted by using a small number of genes. The relationship of features selected in different feature selection methods is investigated and the most frequent features selected in each fold among all methods for both datasets are evaluated.

Mechanism study of selective heavy metal ion removal with polypyrrole-functionalized polyacrylonitrile nanofiber mats

Energy Technology Data Exchange (ETDEWEB)

Wang, Jianqiang; Luo, Chao [Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Qi, Genggeng [Department of Materials Science and Engineering, Cornell University, Ithaca, NY (United States); Pan, Kai, E-mail: pankai@mail.buct.edu.cn [Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China); Department of Materials Science and Engineering, Cornell University, Ithaca, NY (United States); Cao, Bing, E-mail: bcao@mail.buct.edu.cn [Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing 100029 (China)

2014-10-15

Graphical abstract: - Highlights: • PAN/PPy core/shell nanofiber used for Cr(VI) removal. • Adsorption mechanisms were investigated. • Selective adsorption performances were investigated. - Abstract: Polyacrylonitrile/polypyrrole (PAN/PPy) core/shell nanofiber mat was prepared through electrospinning followed by a simple chemical oxidation method. The polypyrrole-functionalized nanofiber mats showed selective adsorption performance for anions. The interaction between heavy metal anions and polypyrrole (especially the interaction between Cr{sub 2}O{sub 7}{sup 2−} and polypyrrole) during the adsorption process was studied. The results showed that the adsorption process included two steps: one was the anion exchange process between the Cl{sup −} and Cr(VI), and the other was the redox process for the Cr(VI) ions. The adsorption amount was related to the protonation time of the PAN/PPy nanofiber mat and increased as protonation time increased. Meanwhile, the Cr(VI) ions were reduced to Cr(III) through the reaction with amino groups of polypyrrole (from secondary amines to tertiary amines). PAN/PPy nanofiber mat showed high selectivity for Cr(VI), and the adsorption performance was nearly unaffected by other co-existing anions (Cl{sup −}, NO{sub 3}{sup −}, and SO{sub 4}{sup 2−}) except for PO{sub 4}{sup 3−} for the pH change.

The Impact of 2008 Global Financial Crisis on the Performance of Selected Indonesian Stocks: A Preliminary Study

Directory of Open Access Journals (Sweden)

Edwin Suparman

2014-08-01

Full Text Available This research is a preliminary study that analyzes the impact of the US financial markets on Indonesian financial markets during the 2008 global financial crisis. It specifically investigates the occurrence of contagion effect in the Indonesian IHSG index and selected LQ45 stocks with the US S&P500 index by the measurement of correlation using simple correlation, EWMA, OGARCH, and DCC GARCH. It also attempts to discuss on the decoupling of Indonesian market and provide recommendations on dealing with future similar events.

High performance APCS conceptual design and evaluation scoping study

International Nuclear Information System (INIS)

Soelberg, N.; Liekhus, K.; Chambers, A.; Anderson, G.

1998-02-01

This Air Pollution Control System (APCS) Conceptual Design and Evaluation study was conducted to evaluate a high-performance (APC) system for minimizing air emissions from mixed waste thermal treatment systems. Seven variations of high-performance APCS designs were conceptualized using several design objectives. One of the system designs was selected for detailed process simulation using ASPEN PLUS to determine material and energy balances and evaluate performance. Installed system capital costs were also estimated. Sensitivity studies were conducted to evaluate the incremental cost and benefit of added carbon adsorber beds for mercury control, specific catalytic reduction for NO x control, and offgas retention tanks for holding the offgas until sample analysis is conducted to verify that the offgas meets emission limits. Results show that the high-performance dry-wet APCS can easily meet all expected emission limits except for possibly mercury. The capability to achieve high levels of mercury control (potentially necessary for thermally treating some DOE mixed streams) could not be validated using current performance data for mercury control technologies. The engineering approach and ASPEN PLUS modeling tool developed and used in this study identified APC equipment and system performance, size, cost, and other issues that are not yet resolved. These issues need to be addressed in feasibility studies and conceptual designs for new facilities or for determining how to modify existing facilities to meet expected emission limits. The ASPEN PLUS process simulation with current and refined input assumptions and calculations can be used to provide system performance information for decision-making, identifying best options, estimating costs, reducing the potential for emission violations, providing information needed for waste flow analysis, incorporating new APCS technologies in existing designs, or performing facility design and permitting activities

Impact of window selection on the energy performance of residential buildings in South Korea

International Nuclear Information System (INIS)

Ihm, Pyeongchan; Park, Lyool; Krarti, Moncef; Seo, Donghyun

2012-01-01

With rapidly increasing energy consumption attributed to residential buildings in South Korea, there is a need to update requirements of the building energy code in order to improve the energy performance of buildings. This paper provides some guidelines to improve the building energy code to better select glazing types that minimize total energy use of residential buildings in Korea. In particular, detailed energy simulation analyses coupled with economical and environmental assessments are carried out to assess the thermal, economical, and environmental impacts of glazing thermal characteristics as well as window sizes associated with housing units in various representative climates within South Korea. The results of the analyses have clearly indicated that selecting glazing with low solar heat gain coefficient is highly beneficial especially for large windows and for mild climates. In particular, it is found that using any double-pane low-e glazing would provide better performance for windows in residential buildings than the clear double-pane glazing, currently required by the Korean building energy code. - Highlights: ► Results show that windows can be energy neutral for residential buildings. ► In Korea, double-pane low-e glazing would provide better energy performance. ► Double low-e clear filled with argon gas glazing is the most cost-effective.

Managing the Public Sector Research and Development Portfolio Selection Process: A Case Study of Quantitative Selection and Optimization

Science.gov (United States)

2016-09-01

PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION by Jason A. Schwartz...PUBLIC SECTOR RESEARCH & DEVELOPMENT PORTFOLIO SELECTION PROCESS: A CASE STUDY OF QUANTITATIVE SELECTION AND OPTIMIZATION 5. FUNDING NUMBERS 6...describing how public sector organizations can implement a research and development (R&D) portfolio optimization strategy to maximize the cost

Human Resource Management Practice and Organizational Performance: Case Study from Hormuud Telecom in Mogadishu-Somalia

Directory of Open Access Journals (Sweden)

Abdulkadir Mohamud Dahie

2017-06-01

Full Text Available Organizational performance is getting more and more important, especially in a market with greater competition and dynamic. Organizational performance is measured through different indicators. It guarantees the continuity of the organization to be competitive in a global marketplace. Normally, the implementation of performance indicators achieved through human resources. Human resources are the key for keeping the organization in the market. These human resources need to be managed effectively to achieve the required performance of the organization. It is necessary to manage strategically the human resources and to adapt at its strategy with organizational strategy. The aim of this study is to investigate the influence of recruitment and selection on organizational performance, to examine the role of compensation and reward on organizational performance as well as the effect of performance appraisal management on organizational performance at Hormuud Telecom in Mogadishu-Somalia. The researcher utilized convenient sampling to collect 100 questionnaires from Hormuud Telecom in Mogadishu, Somalia. These respondents were provided a questionnaire with four main construct which measuring recruitment and selection, compensation and reward, performance appraisal management and organizational performance. However, using correlation coefficient, the study found that organizational performance (Dependent variable had significant positive influence with three dimensions of independent variable. The result of regression analysis found that three constructs had statistically significant, positive, and straight effects with organizational performance.

Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study

International Nuclear Information System (INIS)

Sarkar, Jahar; Bhattacharyya, Souvik

2015-01-01

India has great potential to employ the ORC (organic Rankine cycle) technology for conversion of low temperature waste heat and renewable energy. In this study, available waste heat and relevant renewable heat sources in India are reviewed and suitable working fluids for ORC have been selected based on operational, environmental and safety criteria. A feasibility study and comparison of selected fluids for ORC is also presented for Indian climates along with discussions on component, operation and cost related aspects. A comprehensive review on available heat sources and sinks shows that India has plenty of waste heat and renewable energy sources for electricity generation by means of ORC; however, condenser operation may be challenging due to wide ambient temperature variation. Appropriate performance comparison among selected working fluids shows that ammonia is the best fluid in terms of net power generation and compactness of turbo-machineries, whereas n-Pentane is the best fluid in terms of thermal efficiency and heat exchanger compactness. Both are recommended as working fluids for ORC installations in India. The study reveals that there is a great opportunity to employ this technology in India provided we have to overcome some challenges related to component selection, finance and maintenance. - Highlights: • Available waste heat and renewable heat energies, and sinks in India are reviewed. • Suitable working fluids are selected by operational, environmental and safety criteria. • A feasibility study and comparison of selected fluids are presented for Indian climates. • Ammonia and n-Pentane are recommended for ORC installation in India. • Challenges related to plant component, operation and cost are discussed.

Relations between 18-month-olds' gaze pattern and target action performance: a deferred imitation study with eye tracking.

Science.gov (United States)

Óturai, Gabriella; Kolling, Thorsten; Knopf, Monika

2013-12-01

Deferred imitation studies are used to assess infants' declarative memory performance. These studies have found that deferred imitation performance improves with age, which is usually attributed to advancing memory capabilities. Imitation studies, however, are also used to assess infants' action understanding. In this second research program it has been observed that infants around the age of one year imitate selectively, i.e., they imitate certain kinds of target actions and omit others. In contrast to this, two-year-olds usually imitate the model's exact actions. 18-month-olds imitate more exactly than one-year-olds, but more selectively than two-year-olds, a fact which makes this age group especially interesting, since the processes underlying selective vs. exact imitation are largely debated. The question, for example, if selective attention to certain kinds of target actions accounts for preferential imitation of these actions in young infants is still open. Additionally, relations between memory capabilities and selective imitation processes, as well as their role in shaping 18-month-olds' neither completely selective, nor completely exact imitation have not been thoroughly investigated yet. The present study, therefore, assessed 18-month-olds' gaze toward two types of actions (functional vs. arbitrary target actions) and the model's face during target action demonstration, as well as infants' deferred imitation performance. Although infants' fixation times to functional target actions were not longer than to arbitrary target actions, they imitated the functional target actions more frequently than the arbitrary ones. This suggests that selective imitation does not rely on selective gaze toward functional target actions during the demonstration phase. In addition, a post hoc analysis of interindividual differences suggested that infants' attention to the model's social-communicative cues might play an important role in exact imitation, meaning the imitation

Efficient Multi-Label Feature Selection Using Entropy-Based Label Selection

Directory of Open Access Journals (Sweden)

Jaesung Lee

2016-11-01

Full Text Available Multi-label feature selection is designed to select a subset of features according to their importance to multiple labels. This task can be achieved by ranking the dependencies of features and selecting the features with the highest rankings. In a multi-label feature selection problem, the algorithm may be faced with a dataset containing a large number of labels. Because the computational cost of multi-label feature selection increases according to the number of labels, the algorithm may suffer from a degradation in performance when processing very large datasets. In this study, we propose an efficient multi-label feature selection method based on an information-theoretic label selection strategy. By identifying a subset of labels that significantly influence the importance of features, the proposed method efficiently outputs a feature subset. Experimental results demonstrate that the proposed method can identify a feature subset much faster than conventional multi-label feature selection methods for large multi-label datasets.

Parameter Selection and Performance Comparison of Particle Swarm Optimization in Sensor Networks Localization.

Science.gov (United States)

Cui, Huanqing; Shu, Minglei; Song, Min; Wang, Yinglong

2017-03-01

Localization is a key technology in wireless sensor networks. Faced with the challenges of the sensors' memory, computational constraints, and limited energy, particle swarm optimization has been widely applied in the localization of wireless sensor networks, demonstrating better performance than other optimization methods. In particle swarm optimization-based localization algorithms, the variants and parameters should be chosen elaborately to achieve the best performance. However, there is a lack of guidance on how to choose these variants and parameters. Further, there is no comprehensive performance comparison among particle swarm optimization algorithms. The main contribution of this paper is three-fold. First, it surveys the popular particle swarm optimization variants and particle swarm optimization-based localization algorithms for wireless sensor networks. Secondly, it presents parameter selection of nine particle swarm optimization variants and six types of swarm topologies by extensive simulations. Thirdly, it comprehensively compares the performance of these algorithms. The results show that the particle swarm optimization with constriction coefficient using ring topology outperforms other variants and swarm topologies, and it performs better than the second-order cone programming algorithm.

Parameter Selection and Performance Comparison of Particle Swarm Optimization in Sensor Networks Localization

Directory of Open Access Journals (Sweden)

Huanqing Cui

2017-03-01

Full Text Available Localization is a key technology in wireless sensor networks. Faced with the challenges of the sensors’ memory, computational constraints, and limited energy, particle swarm optimization has been widely applied in the localization of wireless sensor networks, demonstrating better performance than other optimization methods. In particle swarm optimization-based localization algorithms, the variants and parameters should be chosen elaborately to achieve the best performance. However, there is a lack of guidance on how to choose these variants and parameters. Further, there is no comprehensive performance comparison among particle swarm optimization algorithms. The main contribution of this paper is three-fold. First, it surveys the popular particle swarm optimization variants and particle swarm optimization-based localization algorithms for wireless sensor networks. Secondly, it presents parameter selection of nine particle swarm optimization variants and six types of swarm topologies by extensive simulations. Thirdly, it comprehensively compares the performance of these algorithms. The results show that the particle swarm optimization with constriction coefficient using ring topology outperforms other variants and swarm topologies, and it performs better than the second-order cone programming algorithm.

Effect of magnetic therapy on selected physical performances.

Science.gov (United States)

Schall, David M; Ishee, Jimmy H; Titlow, Larry W

2003-05-01

The purpose of this study was to investigate the effects of magnetic therapy in the form of shoe insoles on vertical jump, bench squat, 40-yd dash, and a soccer-specific fitness test performance. Subjects were 14 collegiate male soccer players who were pretested, retested 3 weeks later, and then placed into a double-blind control or treatment group using a matching procedure. The control group received magnetic shoe insoles with a rating of 125 gauss, and the treatment group received insoles with a rating of 600 gauss. Subjects wore the insoles during practice and games for 7 weeks and were then retested. Results indicated significant differences among test scores during the 3 time periods but not between the treatment and control groups. There was a decline in 40-yd dash performance from the initial evaluation (5.10 seconds) to the final evaluation (5.08 seconds). There were no other significant differences. Within the limitations of the study, magnetic therapy did not improve physical performance.

Treatment of selected pharmaceuticals by ferrate(VI): performance, kinetic studies and identification of oxidation products.

Science.gov (United States)

Zhou, Zhengwei; Jiang, Jia-Qian

2015-03-15

The performance of ferrate(VI) in treating sulfamethoxazole (SMX), diclofenac (DCF), carbamazepine (CBZ) and bezafibrate (BZF) in test solutions containing the four compounds was investigated. A series of jar-test experiments was performed on a bench-scale at pH 6-9 and at a ferrate(VI) dose of 1-5 mg Fe/L. The results suggested that ferrate(VI) can effectively remove SMX, DCF and CBZ from the test solutions, with greater than 80% removal under optimum conditions. However, the removal efficiency of BZF was very low, less than 25% under the studied conditions. Increasing the dose of ferrate(VI) improved the treatment performance, while the influence of solution pH on ferrate(VI) performance varied among the different target compounds. Ferrate(VI) demonstrated the highest reactivity with SMX at pH 8 and pH 9 (20 °C), with apparent second-order rate constants of 360±17 M(-1) s(-1) and 1.26±0.02 M(-1) s(-1), respectively. However, BZF showed the lowest removal by ferrate(VI) with the smallest rate constants (less than 0.5 M(-1) s(-1)) at pH 8 and pH 9. Furthermore, a number of oxidation products (OPs) of SMX, DCF and CBZ during ferrate(VI) oxidation were detected by liquid chromatography and mass spectrometry (LC-MS), and their degradation pathways were tentatively proposed. No OPs of BZF were detected during ferrate(VI) oxidation. Copyright © 2014 Elsevier B.V. All rights reserved.

GENETIC DIVERGENCE AND MORPHO - AGRONOMIC PERFORMANCE OF JATROPHA CURCAS L. CLONES FOR SELECTION OF CLONAL VARIETIES

Directory of Open Access Journals (Sweden)

ADRIANA QUEIROZ DE ALMEIDA

2016-01-01

Full Text Available The knowledge about genetic diversity of jatropha crop is important for genetic conservation resources and breeding of this species. The aim of this study was to evaluate the genetic diversity and performance of jatropha clones through morphological characterization to selection of clonal varieties for biofuels production. The clones were obtained through shoot cuttings from previous selection in a population of half - sibs progenies. The morphoagronomic analyses of clones was carried out at 180 days after transplantation and were evaluated plant height, stem diameter, number of primary branches and number of secondary branches, number of bunches and number of fruits per plant. Evaluating clones performance, significant results were found for the number of secondary branches. About analysis of genetic diversity, the measures of dissimilarity genetic varied from 0.62 to 13.11, this way, the UFRBPR14 and UFRBPR15 clones were more divergent. The Tocher method was efficient to verify formation of four groups. The characteristics that most contributed to the divergence among clones were branches number, height and number of bunches, and, stem diameter had lower contribution. The jatropha clones differed only in the secondary branches number and multivariate analysis showed divergence among the jatropha clones with formation of four groups. Also, branches number, plant height and number of bunches were characteristic that contributed to genetic divergence.

Performance analysis and binary working fluid selection of combined flash-binary geothermal cycle

International Nuclear Information System (INIS)

Zeyghami, Mehdi

2015-01-01

Performance of the combined flash-binary geothermal power cycle for geofluid temperatures between 150 and 250 °C is studied. A thermodynamic model is developed, and the suitable binary working fluids for different geofluid temperatures are identified from a list of thirty working fluid candidates, consisting environmental friendly refrigerants and hydrocarbons. The overall system exergy destruction and Vapor Expansion Ratio across the binary cycle turbine are selected as key performance indicators. The results show that for low-temperature heat sources using refrigerants as binary working fluids result in higher overall cycle efficiency and for medium and high-temperature resources, hydrocarbons are more suitable. For combined flash-binary cycle, secondary working fluids; R-152a, Butane and Cis-butane show the best performances at geofluid temperatures 150, 200 and 250 °C respectively. The overall second law efficiency is calculated as high as 0.48, 0.55 and 0.58 for geofluid temperatures equal 150, 200 and 250 °C respectively. The flash separator pressure found to has important effects on cycle operation and performance. Separator pressure dictates the work production share of steam and binary parts of the system. And there is an optimal separator pressure at which overall exergy destruction of the cycle achieves its minimum value. - Highlights: • Performance of the combined flash-binary geothermal cycle is investigated. • Thirty different fluids are screened to find the most suitable ORC working fluid. • Optimum cycle operation conditions presented for geofluids between 150 °C and 250 °C. • Refrigerants are more suitable for the ORC at geothermal sources temperature ≤200 °C. • Hydrocarbons are more suitable for the ORC at geothermal sources temperature >200 °C

Statistical study on the self-selection bias in FDG-PET cancer screening by a questionnaire survey

International Nuclear Information System (INIS)

Kita, Tamotsu; Yano, Fuzuki; Watanabe, Sadahiro; Soga, Shigeyoshi; Hama, Yukihiro; Shinmoto, Hiroshi; Kosuda, Shigeru

2008-01-01

A questionnaire survey was performed to investigate the possible presence of self-selection bias in 18 F-fluorodeoxyglucose (FDG) positron emission tomography (PET) cancer screening (PET cancer screening). Responders to the questionnaires survey consisted of 80 healthy persons, who answered whether they undergo PET cancer screening, health consciousness, age, sex, and smoking history. The univariate and multivariate analyses on the four parameters were performed between the responders who were to undergo PET cancer screening and the responders who were not. Statistically significant difference was found in health consciousness between the above-mentioned two groups by both univariate and multivariate analysis with the odds ratio of 2.088. The study indicated that self-selection bias should exist in PET cancer screening. (author)

Using a Prescreening Rubric for All-State Violin Selection: Influences of Performance and Teaching Experience

Science.gov (United States)

Geringer, John M.; Allen, Michael L.; MacLeod, Rebecca B.; Scott, Laurie

2009-01-01

Performance assessment is an integral part of young musicians' development. Students enrolled in music programs frequently participate in adjudication festivals and many audition for select ensembles. Outcomes of such events are deemed consequential among all concerned: students, parents, teachers, and administrators. Furthermore, the number of…

Building Enclosure Hygrothermal Performance Study, Phase 1

Energy Technology Data Exchange (ETDEWEB)

Karagiozis, A.N.

2002-08-08

The moisture performance of three different classes of wall systems has been investigated in the context of the preliminary hygrothermal analysis of walls in Seattle. The results reported in this phase specifically address the moisture performance of walls designed with loads that have some unintentional water penetration. The results have been developed in a manner to present the relative performance of the walls in the same climate with similar water penetration effects. The analysis was performed with the best available input data. Several limitations should be recognized within the context of this study. Results showed that selection of wooden sheathing boards on interior vapor-tight assemblies does not significantly influence the performance of stucco-clad walls. A larger effect was observed when the interior vapor control is made vapor open. When continuous cavity ventilation is employed, the effect of the selection of the type of sheathing board on the hygrothermal performance of the wall was found to be negligible. When comparing oriented strand board sheathing performance against the performance of exterior grade gypsum, the differences are very significant in terms of the amount of moisture content present in the walls. Moisture content alone does not indicate their respective durability as durability is directly related to the combination of relative humidity and temperature, mechanical, chemical, and biological properties of the substrates. This study did not investigate the durability performance of either sheathing. In terms of interior vapor control, inhabitant behavior must be considered during the wall hygrothermal design stage. If interior relative humidity is maintained below 60%, then a latex primer and paint may perform better than the use of PVA or even a polyethylene sheet. When the interior environment is maintained at a higher relative humidity, then stricter vapor control is needed. Multilayered building paper was experimentally shown to

Performance characteristics of selected integrating ion chambers

International Nuclear Information System (INIS)

Lubenau, J.O.; Liberace, R.

1977-01-01

Certain types of integrating ion chambers have been identified as acceptable equipment for a nationwide medical X-ray exposure survey program. In this study, Victoreen 2.5, 5 and 10 R condenser R-chambers, the Victoreen 666 Diagnostic Probe (used in the integrating mode) and the Bendix 200 mR and 5 R low energy dosimeters were evaluated for recombination losses and for energy dependence. Recombination losses were determined for exposure rates ranging from 0.3 to 80 R/sec. Energy dependence was determined for X-ray beam qualities ranging from 45 kVp and 0.83 mm Al first half value layer to 125 kVp and 4.8 mm Al first half value layer. The data enable selection of instruments so that errors from recombination losses and energy dependence can be minimized. (author)

Selective use of the biphasic-contrast barium enema study for evaluation of colonic lesions: Results of a prospective study

International Nuclear Information System (INIS)

De Lange, E.E.; Shaffer, H.A. Jr.; Riddervold, H.O.

1987-01-01

The authors performed a prospective study to determine the value of selective use of the biphasic contrast technique for a variety of indications. In a series of 571 double-contrast barium enema examinations, the examination was immediately followed by a single-contrast study in 85 cases. The biphasic procedure was performed to reexamine a colonic segment that was poorly evaluated initially because of diverticulosis (eta = 35), incomplete filling (eta = 28), or poor mucosal coating (eta = 26); or to verify or exclude a possible lesion identified during the double-contrast examination (eta = 22). The single-contrast study confirmed five polyps and excluded lesions in 17 cases with suspected polyps (eta = 5), strictures (eta = 4), and spasm (eta = 8). Six polyps not visualized on the double-contrast examination were detected with the single-contrast procedure

Performance-influencing factors in homogeneous groups of top athletes: a cross-sectional study

OpenAIRE

van Ingen Schenau, G.J.; Bakker, F.C.; de Koning, J.J.; de Groot, G.

1996-01-01

Sport scientists have identified many factors as prerequisites for a good athletic performance in various sports. It is not clear whether these factors also influence the best performers in the homogeneous groups of top athletes selected for national teams. In this study, this issue is addressed with members of the Dutch National Junior Speed Skirting Team. A total of 237 different technical, physiological, anthropometrical, and psychological parameters were collected, including many that cor...

Selection as a learning experience: an exploratory study.

Science.gov (United States)

de Visser, Marieke; Laan, Roland F; Engbers, Rik; Cohen-Schotanus, Janke; Fluit, Cornelia

2018-01-01

Research on selection for medical school does not explore selection as a learning experience, despite growing attention for the learning effects of assessment in general. Insight in the learning effects allows us to take advantage of selection as an inclusive part of medical students' learning process to become competent professionals. The aims of this study at Radboud University Medical Center, the Netherlands, were 1) to determine whether students have learning experiences in the selection process, and, if so, what experiences; and 2) to understand what students need in order to utilize the learning effects of the selection process at the start of the formal curriculum. We used focus groups to interview 30 students admitted in 2016 about their learning experiences in the selection process. Thematic analysis was used to explore the outcomes of the interviews and to define relevant themes. In the selection process, students learned about the curriculum, themselves, their relation to others, and the profession they had been selected to enter, although this was not explicitly perceived as learning. Students needed a connection between selection and the curriculum as well as feedback to be able to really use their learning experiences for their further development. Medical school selection qualifies as a learning experience, and students as well as medical schools can take advantage of this. We recommend a careful design of the selection procedure, integrating relevant selection learning experiences into the formal curriculum, providing feedback and explicitly approaching the selection and the formal curriculum as interconnected contributors to students' development.

Multicriteria Decision Analysis of Material Selection of High Energy Performance Residential Building

Science.gov (United States)

Čuláková, Monika; Vilčeková, Silvia; Katunská, Jana; Krídlová Burdová, Eva

2013-11-01

In world with limited amount of energy sources and with serious environmental pollution, interest in comparing the environmental embodied impacts of buildings using different structure systems and alternative building materials will be increased. This paper shows the significance of life cycle energy and carbon perspective and the material selection in reducing energy consumption and emissions production in the built environment. The study evaluates embodied environmental impacts of nearly zero energy residential structures. The environmental assessment uses framework of LCA within boundary: cradle to gate. Designed alternative scenarios of material compositions are also assessed in terms of energy effectiveness through selected thermal-physical parameters. This study uses multi-criteria decision analysis for making clearer selection between alternative scenarios. The results of MCDA show that alternative E from materials on nature plant base (wood, straw bales, massive wood panel) present possible way to sustainable perspective of nearly zero energy houses in Slovak republic

Performance study of coal-base charcoals for removing radioiodine

International Nuclear Information System (INIS)

Huang Yuying; Wu Yanwei; Guo Liangtian; Jia Ming; Lu Xueshi; Zhang Hong

1988-01-01

In authos' laboratory sveral types of domestic coal-base charcoals are selected and impregnated and examined for their main physical and chemical performances. The results show that under the test conditions the iodine-removing efficiencies of these impregnated coal-base charcoals charcoals are not poorer than that of the impregnated fruit-shell base charcoals (such as coconut shell charcoal) and most of their physical properties can satisfy the requirements of the nuclear grade charcoals assigned in USA standards. More detailed studies will be made in the next programme

Regional climate models' performance in representing precipitation and temperature over selected Mediterranean areas

Directory of Open Access Journals (Sweden)

R. Deidda

2013-12-01

Full Text Available This paper discusses the relative performance of several climate models in providing reliable forcing for hydrological modeling in six representative catchments in the Mediterranean region. We consider 14 Regional Climate Models (RCMs, from the EU-FP6 ENSEMBLES project, run for the A1B emission scenario on a common 0.22° (about 24 km rotated grid over Europe and the Mediterranean region. In the validation period (1951 to 2010 we consider daily precipitation and surface temperatures from the observed data fields (E-OBS data set, available from the ENSEMBLES project and the data providers in the ECA&D project. Our primary objective is to rank the 14 RCMs for each catchment and select the four best-performing ones to use as common forcing for hydrological models in the six Mediterranean basins considered in the EU-FP7 CLIMB project. Using a common suite of four RCMs for all studied catchments reduces the (epistemic uncertainty when evaluating trends and climate change impacts in the 21st century. We present and discuss the validation setting, as well as the obtained results and, in some detail, the difficulties we experienced when processing the data. In doing so we also provide useful information and advice for researchers not directly involved in climate modeling, but interested in the use of climate model outputs for hydrological modeling and, more generally, climate change impact studies in the Mediterranean region.

Diet and density dependent competition affect larval performance and oviposition site selection in the mosquito species Aedes albopictus (Diptera: Culicidae

Directory of Open Access Journals (Sweden)

Yoshioka Miho

2012-10-01

Full Text Available Abstract Background Oviposition-site choice is an essential component of the life history of all mosquito species. According to the oviposition-preference offspring-performance (P-P hypothesis, if optimizing offspring performance and fitness ensures high overall reproductive fitness for a given species, the female should accurately assess details of the heterogeneous environment and lay her eggs preferentially in sites with conditions more suitable to offspring. Methods We empirically tested the P-P hypothesis using the mosquito species Aedes albopictus by artificially manipulating two habitat conditions: diet (measured as mg of food added to a container and conspecific density (CD; number of pre-existing larvae of the same species. Immature development (larval mortality, development time to pupation and time to emergence and fitness (measured as wing length were monitored from first instar through adult emergence using a factorial experimental design over two ascending gradients of diet (2.0, 3.6, 7.2 and 20 mg food/300 ml water and CD (0, 20, 40 and 80 larvae/300 ml water. Treatments that exerted the most contrasting values of larval performance were recreated in a second experiment consisting of single-female oviposition site selection assay. Results Development time decreased as food concentration increased, except from 7.2 mg to 20.0 mg (Two-Way CR ANOVA Post-Hoc test, P > 0.1. Development time decreased also as conspecific density increased from zero to 80 larvae (Two-Way CR ANOVA Post-Hoc test, P . Combined, these results support the role of density-dependent competition for resources as a limiting factor for mosquito larval performance. Oviposition assays indicated that female mosquitoes select for larval habitats with conspecifics and that larval density was more important than diet in driving selection for oviposition sites. Conclusions This study supports predictions of the P-P hypothesis and provides a mechanistic understanding

Personality as predictor of customer service centre agent performance in the banking industry: An exploratory study

Directory of Open Access Journals (Sweden)

Linda Blignaut

2014-10-01

Research purpose: The aim of the study was to identify personality traits, as measured by the Occupational Personality Questionnaire 32r (item response theory scored version, including the more parsimonious Big Five personality traits, that may act as job performance predictors for customer service centre (CSC agents in the banking industry. Motivation for the study: This study provides an exploratory investigation of whether specific personality traits differ amongst CSC agents in the banking industry, based on their job performance. No published research in this field could be identified. Research design, approach and method: Purposive sampling was used to collect data from the entire CSC agent base of a particular banking group (N = 89. Responses were analysed by means of quantitative techniques. Main findings and practical/managerial implications: Results indicate that parsimonious traits of personality, expressed as the Big Five personality traits, predict job performance. The importance of carefully selecting suitable job performance criteria for a specific environment, however, emerged as a critical issue in performance prediction. Contribution: The study focuses attention on the importance of CSC agents’ performance as frontline staff in the banking industry and identifying valid criteria for selecting the most suitable agents. Providing a one-contact point of service such as a CSC is a fairly new approach in the South African banking industry and this study provides an initial investigation of personality traits that may serve as job performance predictors in this environment.

The comparison of Selective Attention Deficit in Dual Task Performance in Elderly Alzheimer Patients and Healthy Elderly Individuals

Directory of Open Access Journals (Sweden)

A. m. Azadian

2014-06-01

Full Text Available The purpose of this study was to compare selective attention deficit in elderly Alzheimer patients and healthy elderly individuals using the dual task. Therefore, 23 subjects (11 females and 12 males age 62 to 81 years; 13 patients with Alzheimer's disease (AD and 10 healthy elderly subjects (EHI with normal cognitive function participated in this study. people with Alzheimer's disease. healthy people was selected through some neurologist identified Short Portable Mental Status Questionnaire (SPMSQ. After obtaining the average number of correct counting of months of the year in both simple and difficult cognitive task the overall error (E or Root Mean Squared Error (RMSE, and variable error (VE were calculated for the tracking task. Then each person performed 10 tasks simultaneously (under Dual-task in both simple and difficult mode. Analysis of variance in cognitive tasks showed that there was a significant interaction between task difficulty and risk of AD (p0.05. In other words, at dual conditions of tracking task, accuracy and consistency of both groups was equally reduced, which was most prominent in difficult conditions. This decrease indicates increased interference at response level due to defects in the mechanisms of selective attention in dual cognitive and tracking tasks and both groups.

A proposal for a process of selection, bibliometrics and sistemic review of articles on the supply chain performance evaluation

Directory of Open Access Journals (Sweden)

Emílio Della Bruna Junior

2012-11-01

Full Text Available Supply Chain Management has been widely studied through scientific researches and publications, presenting well grounded concepts in both academic and business areas. Meanwhile, the topic of Performance Evaluation is newer and its concepts are still under consolidation. In this context, the paper aims to propose a process for selection and analysis of a portfolio of scientific articles on Supply Chain Performance Evaluation. To do this, it illustrates a process for searching and selecting articles from scientific databases and analyzes them through Bibliometrics and Systemic Review. As a result, a portfolio of 18 papers aligned to the research subject was obtained and the journals, authors and articles with higher academic relevance were identified. The Systemic Review, in turn, has highlighted the knowledge gaps of the evaluated papers and, from these, developed a research question and objective aiming to answer them. These latter will guide the continuity of this research. Finally, it is expected that the proposed process can be useful for researchers wishing to apply it to their research topics.

Optimum location of external markers using feature selection algorithms for real-time tumor tracking in external-beam radiotherapy: a virtual phantom study.

Science.gov (United States)

Nankali, Saber; Torshabi, Ahmad Esmaili; Miandoab, Payam Samadi; Baghizadeh, Amin

2016-01-08

In external-beam radiotherapy, using external markers is one of the most reliable tools to predict tumor position, in clinical applications. The main challenge in this approach is tumor motion tracking with highest accuracy that depends heavily on external markers location, and this issue is the objective of this study. Four commercially available feature selection algorithms entitled 1) Correlation-based Feature Selection, 2) Classifier, 3) Principal Components, and 4) Relief were proposed to find optimum location of external markers in combination with two "Genetic" and "Ranker" searching procedures. The performance of these algorithms has been evaluated using four-dimensional extended cardiac-torso anthropomorphic phantom. Six tumors in lung, three tumors in liver, and 49 points on the thorax surface were taken into account to simulate internal and external motions, respectively. The root mean square error of an adaptive neuro-fuzzy inference system (ANFIS) as prediction model was considered as metric for quantitatively evaluating the performance of proposed feature selection algorithms. To do this, the thorax surface region was divided into nine smaller segments and predefined tumors motion was predicted by ANFIS using external motion data of given markers at each small segment, separately. Our comparative results showed that all feature selection algorithms can reasonably select specific external markers from those segments where the root mean square error of the ANFIS model is minimum. Moreover, the performance accuracy of proposed feature selection algorithms was compared, separately. For this, each tumor motion was predicted using motion data of those external markers selected by each feature selection algorithm. Duncan statistical test, followed by F-test, on final results reflected that all proposed feature selection algorithms have the same performance accuracy for lung tumors. But for liver tumors, a correlation-based feature selection algorithm, in

Assessment of pharmacy information system performance in selected hospitals in isfahan city during 2011.

Science.gov (United States)

Saqaeian Nejad Isfahani, Sakineh; Mirzaeian, Razieh; Habibi, Mahbobe

2013-01-01

In supporting a therapeutic approach and medication therapy management, pharmacy information system acts as one of the central pillars of information system. This ensures that medication therapy is being supported and evaluated with an optimal level of safety and quality similar to other treatments and services. This research aims to evaluate the performance of pharmacy information system in three types of teaching, private and social affiliated hospitals. The present study is an applied, descriptive and analytical study which was conducted on the pharmacy information system in use in the selected hospitals. The research population included all the users of pharmacy information systems in the selected hospitals. The research sample is the same as the research population. Researchers collected data using a self-designed checklist developed following the guidelines of the American Society of Health-System Pharmacists, Australia pharmaceutical Society and Therapeutic guidelines of the Drug Commission of the German Medical Association. The checklist validity was assessed by research supervisors and pharmacy information system pharmacists and users. To collect data besides observation, the questionnaires were distributed among pharmacy information system pharmacists and users. Finally, the analysis of the data was performed using the SPSS software. Pharmacy information system was found to be semi-automated in 16 hospitals and automated in 3 ones. Regarding the standards in the guidelines issued by the Society of Pharmacists, the highest rank in observing the input standards belonged to the Social Services associated hospitals with a mean score of 32.75. While teaching hospitals gained the highest score both in processing standards with a mean score of 29.15 and output standards with a mean score of 43.95, and the private hospitals had the lowest mean scores of 23.32, 17.78, 24.25 in input, process and output standards respectively. Based on the findings, the studied

Study of Machine-Learning Classifier and Feature Set Selection for Intent Classification of Korean Tweets about Food Safety

Directory of Open Access Journals (Sweden)

Yeom, Ha-Neul

2014-09-01

Full Text Available In recent years, several studies have proposed making use of the Twitter micro-blogging service to track various trends in online media and discussion. In this study, we specifically examine the use of Twitter to track discussions of food safety in the Korean language. Given the irregularity of keyword use in most tweets, we focus on optimistic machine-learning and feature set selection to classify collected tweets. We build the classifier model using Naive Bayes & Naive Bayes Multinomial, Support Vector Machine, and Decision Tree Algorithms, all of which show good performance. To select an optimum feature set, we construct a basic feature set as a standard for performance comparison, so that further test feature sets can be evaluated. Experiments show that precision and F-measure performance are best when using a Naive Bayes Multinomial classifier model with a test feature set defined by extracting Substantive, Predicate, Modifier, and Interjection parts of speech.

Employee performance appraisal and productivity levels in selected ...

African Journals Online (AJOL)

The focus of this study was on performance appraisal of academic staff of Universities in Nigeria and their productivity levels. The prime problem that necessitated this study was to examine the effectiveness of the subjective methods used in appraising qualitative work attributes of the employees and to assess the extent to ...

Effects of Selected Corporate Governance Characteristics on Firm Performance: Empirical Evidence from Kenya

Directory of Open Access Journals (Sweden)

Vincent Okoth Ongore

2011-01-01

Full Text Available This paper examines the interrelations among ownership, board and manager characteristics and firm performance in a sample of 54 firms listed at the Nairobi Stock Exchange (NSE. These governance characteristics, designed to minimize agency problems between principals and agents are operationalized in terms of ownership concentration, ownership identity, board effectiveness and managerial discretion. The typical ownership identities at the NSE are government, foreign, institutional, manager and diverse ownership forms. Firm performance is measured using Return on Assets (ROA, Return on Equity (ROE and Dividend Yield (DY. Using PPMC, Logistic Regression and Stepwise Regression, the paper presents evidence of significant positive relationship between foreign, insider, institutional and diverse ownership forms, and firm performance. However, the relationship between ownership concentration and government, and firm performance was significantly negative. The role of boards was found to be of very little value, mainly due to lack of adherence to board member selection criteria. The results also show significant positive relationship between managerial discretion and performance. Collectively, these results are consistent with pertinent literature with regard to the implications of government, foreign, manager (insider and institutional ownership forms, but significantly differ concerning the effects of ownership concentration and diverse ownership on firm performance.

An event-related brain potential study of visual selective attention to conjunctions of color and shape.

Science.gov (United States)

Smid, H G; Jakob, A; Heinze, H J

1999-03-01

What cognitive processes underlie event-related brain potential (ERP) effects related to visual multidimensional selective attention and how are these processes organized? We recorded ERPs when participants attended to one conjunction of color, global shape and local shape and ignored other conjunctions of these attributes in three discriminability conditions. Attending to color and shape produced three ERP effects: frontal selection positivity (FSP), central negativity (N2b), and posterior selection negativity (SN). The results suggested that the processes underlying SN and N2b perform independent within-dimension selections, whereas the process underlying the FSP performs hierarchical between-dimension selections. At posterior electrodes, manipulation of discriminability changed the ERPs to the relevant but not to the irrelevant stimuli, suggesting that the SN does not concern the selection process itself but rather a cognitive process initiated after selection is finished. Other findings suggested that selection of multiple visual attributes occurs in parallel.

A Study on Relationships between Functional Performance and Task Performance Measure through Experiments in NPP MCR

International Nuclear Information System (INIS)

Jang, In Seok; Seong, Poong Hyun; Park, Jin Kyun

2011-01-01

Further improvements in levels of organization, management, man-machine interfaces, education, training, etc. are required, if high operating reliability of operators in huge and complex plants such as chemical plants and electrical power generating plants is to be maintained. Improvement requires good understanding of operators' behavior, including defining what is good performance for operators, especially in emergency situations. Human performance measures, therefore, are important to enhance performance and to reduce the probability of incidents and accidents in Nuclear Power Plants (NPPs). Operators' performance measures are used for multi-objectives such as control room design, human system interface evaluation, training, procedure and so on. There are two kinds of representative methods to measure operators' performance. These methods are now known as the functional performance measure and task performance measure. Functional performance measures are basically based on the plant process parameters. Functional performance measures indicate how well the operators controlled selected critical parameters. The parameters selected in this paper are derived from the four Critical Safety Functions (CSFs) identified in the emergency operating procedures such as achievement of subcriticality, maintenance of core cooling, maintenance of heat sink and maintenance of containment integrity. Task performance measures are based on the task analysis. Task analysis is to determine the tasks required and how operators are performed. In this paper, task analysis is done with ideal path for an accident completed by experts and Emergency Operation Procedure (EOP). However, most literatures related to operators' performance have been using one of these measures and there is no research to find out the relationships between two measures. In this paper, the relationships between functional performance measure and task performance measure are investigated using experiments. Shortly

Genomic selection in dairy cattle

NARCIS (Netherlands)

Roos, de A.P.W.

2011-01-01

The objectives of this Ph.D. thesis were (1) to optimise genomic selection in dairy cattle with respect to the accuracy of predicting total genetic merit and (2) to optimise a dairy cattle breeding program using genomic selection. The study was performed using a combination of real data sets and

A SWOT Analysis of Male and Female Students' Performance in Chemistry: A Comparative Study

Science.gov (United States)

Ezeudu, Florence O.; Chiaha, Gertrude-Theresa Uzoamaka; Anazor, Lynda Chioma; Eze, Justina Uzoamaka; Omeke, Faith Chinwe

2015-01-01

The purpose of this study was to do a SWOT analysis and compare performances of male and female students in chemistry. Four research questions and four null hypotheses guided the study. Two boys', two girls' and two coeducational schools involving 1319 males and 1831 females, were selected by a stratified, deliberate sampling technique. A…

Microorganism selection and performance in bioslurry reactors treating PAH-contaminated soil.

Science.gov (United States)

Cassidy, D P; Hudak, A J

2002-09-01

A continuous-flow reactor (CSTR) and a soil slurry-sequencing batch reactor (SS-SBR) were operated in 81 vessels for 200 days to treat a soil contaminated with polycyclic aromatic hydrocarbons (PAH). Filtered slurry samples were used to quantify bulk biosurfactant concentrations and PAH emulsification. Concentrations of Corynebacterium aquaticum, Flavobacterium mizutaii, Mycobacterium gastri, Pseudomonas aeruginosa, and Pseudomonas putida were determined using fatty acid methyl ester (FAME) analysis. The CSTR and SS-SBR selected microbial consortia with markedly different surfactant-producing and PAH-degrading abilities. Biosurfactant levels in the SS-SBR reached 4 times the critical micelle concentration (CMC) that resulted in considerable emulsification of PAH. In contrast, CSTR operation resulted in nomeasurable biosurfactant production. Total PAH removal efficiency was 93% in the SS-SBR, compared with only 66% in the CSTR, and stripping of PAH was 3 times less in the SS-SBR. Reversing the mode of operation on day 100 caused a complete reversal in microbial consortia and in reactor performance by day 140. These results show that bioslurry reactor operation can be manipulated to control overall reactor performance.

Selection method and device for reactor core performance calculation input indication

International Nuclear Information System (INIS)

Yuto, Yoshihiro.

1994-01-01

The position of a reactor core component on a reactor core map, which is previously designated and optionally changeable, is displayed by different colors on a CRT screen by using data of a data file incorporating results of a calculation for reactor core performance, such as incore thermal limit values. That is, an operator specifies the kind of the incore component to be sampled on a menu screen, to display the position of the incore component which satisfies a predetermined condition on the CRT screen by different colors in the form of a reactor core map. The position for the reactor core component displayed on the CRT screen by different colors is selected and designated on the screen by a touch panel, a mouse or a light pen, thereby automatically outputting detailed data of evaluation for the reactor core performance of the reactor core component at the indicated position. Retrieval of coordinates of fuel assemblies to be data sampled and input of the coordinates and demand for data sampling can be conducted at once by one menu screen. (N.H.)

Study on electrohydrodynamic jetting performance of organic solvents

Energy Technology Data Exchange (ETDEWEB)

Lee, Soo Hong; Nguyen, Xuan Hung; Gim, Yeong Hyeon; Ko, Han Seo [Sungkyunkwan University, Suwon (Korea, Republic of)

2015-11-15

The electrohydrodynamic (EHD) inkjet method is a printing technology using electricity. This technique allows for the printing of EML (Emission layer) materials, usually used for OLED devices, on a substrate. In this study, ejection experiments were performed with various solvents to verify which of them is properly ejected in the EHD method. The solvents employed were dielectric liquids with low viscosity and it was confirmed that among them two solvents, 1,2-Dichlorobenzene (DCB) and 1,2-Dichloroethane (DCE), produced the pulsating cone-Jet mode and stable cone-jet mode well. In addition, experiments were conducted to find out how the voltage and applied flux influence the ejection mode, in order to apply the result to the ejection control. It was found that the selected solvent was easily ejected and printed, due to the free surface charge and charge density determined by the dielectric constant. Finally, a patterning experiment was performed to verify proper printing.

Optimum selection of solar collectors for a solar-driven ejector air conditioning system by experimental and simulation study

International Nuclear Information System (INIS)

Zhang Wei; Ma Xiaoli; Omer, S.A.; Riffat, S.B.

2012-01-01

Highlights: ► Three solar collectors have been compared to drive ejector air conditioning system. ► A simulation program was constructed to study the effect parameters. ► The outdoor test were conducted to validate the solar collector modeling. ► Simulation program was found to predict solar collector performance accurately. ► The optimal design of solar collector system was carried out. - Abstract: In this paper, three different solar collectors are selected to drive the solar ejector air conditioning system for Mediterranean climate. The performance of the three selected solar collector are evaluated by computer simulation and lab test. Computer model is incorporated with a set of heat balance equations being able to analyze heat transfer process occurring in separate regions of the collector. It is found simulation and test has a good agreement. By the analysis of the computer simulation and test result, the solar ejector cooling system using the evacuated tube collector with selective surface and high performance heat pipe can be most economical when operated at the optimum generating temperature of the ejector cooling machine.

A Non-Ventilated Solar Façade Concept Based on Selective and Transparent Insulation Material Integration: An Experimental Study

Directory of Open Access Journals (Sweden)

Miroslav Čekon

2017-06-01

Full Text Available A new solar façade concept based on transparent insulation and a selective absorber is proposed, tested and compared with conventional insulation and a non-selective type of absorber, respectively. The presented study focuses on an experimental non-ventilated solar type of façade exposed to solar radiation both in the laboratory and in outdoor tests. Due to the high solar absorbance level of the façade, high- and low-emissivity contributions were primarily analysed. All of the implemented materials were contrasted from the thermal and optical point of view. An analysis was made of both thermodynamic and steady state procedures affecting the proposed solar façade concept. Experimental full scale tests on real building components were additionally involved during summer monitoring. An indicator of the temperature response generated by solar radiation exposure demonstrates the outdoor performance of the façade is closely related to overheating phenomena. From the thermal point of view, the proposed transparent insulation and selective absorber concept corresponds to the performance of conventional thermal insulation of identical material thickness; however, the non-selective prototype only provides 50% thermal performance. The results of the solar-based experiments show that with a small-scale experimental prototype, approximately no significant difference is measured when compared with a non-selective absorber type. The only difference was achieved at the maximum of 2.5 K, when the lower temperature was obtained in the solar selective concept. At the full-scale outdoor mode, the results indicate a maximum of 3.0 K difference, however the lower temperature achieves a non-selective approach. This solar façade can actively contribute to the thermal performance of building components during periods of heating.

Performance of Antenna Selection in MIMO System Using Channel Reciprocity with Measured Data

Directory of Open Access Journals (Sweden)

Peerapong Uthansakul

2011-01-01

Full Text Available The channel capacity of MIMO system increases as a function of antenna pairs between transmitter and receiver but it suffers from multiple expensive RF chains. To reduce cost of RF chains, antenna selection (AS method can offer a good tradeoff between expense and performance. For a transmitting AS system, channel state information (CSI feedback is required to choose the best subset of available antennas. However, the delay and error in feedback channel are the most dominant factors to degrade performances. In this paper, the concept of AS method using reciprocal CSI instead of feedback channel is proposed. The capacity performance of proposed system is investigated by own developing Testbed. The obtained results indicate that the reciprocity technique offers a capacity close to a system with perfect CSI and gains a higher capacity than a system without AS method. This benefit is from 0.9 to 2.2 bps/Hz at SNR 10 dB.

Performance of The Selected Main Tree of Liberoid Coffe in The Peatland of Meranti Island, Riau

Directory of Open Access Journals (Sweden)

Budi Martono

2017-01-01

Full Text Available In order to develop (renewal and extension the Liberoid coffee in peatland, it is necessary to do the program of increasing production and quality of Liberoid coffee. It requires the superior planting materials of superior in specific location. This study has the objective to find out the performance of the selected main trees of Liberoid coffee. The study was conducted from January to September 2015 in the area of peatland in the Kedaburapat village, Rangsang Pesisir District, Kepulauan Meranti Regency, Riau. The method used was the direct observation of main trees of selected Liberoid coffee. The observed character is quantitative and qualitative character. The results showed the diversity of quantitative characters within a range between 7.39 to 40.11%. The average number of pieces / bunch is third with a production of 30.63 kg / tree / year, 288.25 cm plant height, stem diameter 36.88 cm, the number of primary branches of 5.88; the number of secondary branches 12.63, crown width 185.88 cm western, eastern 201.13 cm, 209.25 cm southern and northern 216.75 cm. The diversity of qualitative character is seen in the character of shoot color, old fruit color, fruit shape, fruit discuss, and the upper surface of the leaf.

Motivation factors affecting employees job performance in selected ...

African Journals Online (AJOL)

Motivation can be intrinsic, such as satisfaction and feelings of achievement; or extrinsic, such as rewards, punishment, and goal obtainment. The study assessed the motivating factors affecting the job performance of two oil palm companies' ...

Human Error Probabilites (HEPs) for generic tasks and Performance Shaping Factors (PSFs) selected for railway operations

DEFF Research Database (Denmark)

Thommesen, Jacob; Andersen, Henning Boje

This report describes an HRA (Human Reliability Assessment) of six generic tasks and four Perfor-mance Shaping Factors (PSFs) targeted at railway operations commissioned by Banedanmark. The selection and characterization of generic tasks and PSFs are elaborated by DTU Management in close...

In situ product removal in fermentation systems: improved process performance and rational extractant selection.

Science.gov (United States)

Dafoe, Julian T; Daugulis, Andrew J

2014-03-01

The separation of inhibitory compounds as they are produced in biotransformation and fermentation systems is termed in situ product removal (ISPR). This review examines recent ISPR strategies employing several classes of extractants including liquids, solids, gases, and combined extraction systems. Improvement through the simple application of an auxiliary phase are tabulated and summarized to indicate the breadth of recent ISPR activities. Studies within the past 5 years that have highlighted and have discussed "second phase" properties, and that have an effect on fermentation performance, are particular focus of this review. ISPR, as a demonstrably effective processing strategy, continues to be widely adopted as more applications are explored; however, focus on the properties of extractants and their rational selection based on first principle considerations will likely be key to successfully applying ISPR to more challenging target molecules.

Anatomical study of the nerve regeneration after selective neurectomy in the rabbit: clinical application for esthetic calf reduction

OpenAIRE

Shin, Kang-Jae; Yoo, Ja-Young; Lee, Ju-Young; Gil, Young-Chun; Kim, Jeong-Nam; Koh, Ki-Seok; Song, Wu-Chul

2015-01-01

The purposes of this study were therefore to characterize the degeneration and regeneration of nerves to the calf muscles after selective neurectomy, both macroscopically and microscopically, and to determine the incidence of such regeneration in a rabbit model. Seventy four New Zealand white rabbits were used. Selective neurectomy to the triceps surae muscles was performed, and the muscles were subsequently harvested and weighed 1-4 months postneurectomy. The gastrocnemius muscles were stain...

PEER Testbed Study on a Laboratory Building: Exercising Seismic Performance Assessment

OpenAIRE

Comerio, Mary C.; Stallmeyer, John C.; Smith, Ryan; Makris, Nicos; Konstantinidis, Dimitrios; Mosalam, Khalid; Lee, Tae-Hyung; Beck, James L.; Porter, Keith A.; Shaikhutdinov, Rustem; Hutchinson, Tara; Chaudhuri, Samit Ray; Chang, Stephanie E.; Falit-Baiamonte, Anthony; Holmes, William T.

2005-01-01

From 2002 to 2004 (years five and six of a ten-year funding cycle), the PEER Center organized the majority of its research around six testbeds. Two buildings and two bridges, a campus, and a transportation network were selected as case studies to “exercise” the PEER performance-based earthquake engineering methodology. All projects involved interdisciplinary teams of researchers, each producing data to be used by other colleagues in their research. The testbeds demonstrat...

Package performance study: developments since PATRAM 13

Energy Technology Data Exchange (ETDEWEB)

Tegeler, B.; Snyder, A.; Lewis, R. [U.S. Nuclear Regulatory Commission, Washington, DC (United States); Sorenson, K. [Sandia National Labs., Albuquerque, NM (United States)

2004-07-01

The United States Nuclear Regulatory Commission (NRC) initiated a research program in 1999 to study the response of spent nuclear fuel transportation casks to extreme accident conditions. This confirmatory research program is called the Package Performance Study (PPS) and is founded on an enhanced public participatory process that is used to obtain public comments throughout all project phases. The study objectives are to: 1) assess the analysis tools and methods used to predict spent nuclear fuel transportation cask response to extreme mechanical and thermal environments, and 2) demonstrate the inherent safety in spent fuel cask design. Public outreach is a significant element in both of these objectives. The NRC Commission recently approved the full-scale testing of a single NRC certified spent nuclear fuel rail transportation cask. To satisfy Commission direction, NRC staff has developed, for Commission approval, detailed test plans for conducting a full-scale demonstration test on a spent fuel rail transportation cask. The staff proposes to perform a demonstration test involving the collision of a locomotive with a rail cask attached to a conveyance (i.e., railcar) and a subsequent fire test. Further, the staff plans to conduct detailed pre and post -test analysis to compare numerical calculations with data obtained from the test. This paper discusses the process for selection of this scenario and the uncertainties associated with demonstration testing and analysis predictions. The staff's proposal is currently under review by the Commission.

Package performance study: developments since PATRAM 13

International Nuclear Information System (INIS)

Tegeler, B.; Snyder, A.; Lewis, R.; Sorenson, K.

2004-01-01

The United States Nuclear Regulatory Commission (NRC) initiated a research program in 1999 to study the response of spent nuclear fuel transportation casks to extreme accident conditions. This confirmatory research program is called the Package Performance Study (PPS) and is founded on an enhanced public participatory process that is used to obtain public comments throughout all project phases. The study objectives are to: 1) assess the analysis tools and methods used to predict spent nuclear fuel transportation cask response to extreme mechanical and thermal environments, and 2) demonstrate the inherent safety in spent fuel cask design. Public outreach is a significant element in both of these objectives. The NRC Commission recently approved the full-scale testing of a single NRC certified spent nuclear fuel rail transportation cask. To satisfy Commission direction, NRC staff has developed, for Commission approval, detailed test plans for conducting a full-scale demonstration test on a spent fuel rail transportation cask. The staff proposes to perform a demonstration test involving the collision of a locomotive with a rail cask attached to a conveyance (i.e., railcar) and a subsequent fire test. Further, the staff plans to conduct detailed pre and post -test analysis to compare numerical calculations with data obtained from the test. This paper discusses the process for selection of this scenario and the uncertainties associated with demonstration testing and analysis predictions. The staff's proposal is currently under review by the Commission

Dissociating early- and late-selection processes in recall: the mixed blessing of categorized study lists.

Science.gov (United States)

Guzel, Mehmet A; Higham, Philip A

2013-07-01

Two experiments are reported in which we used type-2 signal detection theory to separate the effects of semantic categorization on early- and late-selection processes in free and cued recall. In Experiment 1, participants studied cue-target pairs for which the targets belonged to two, six, or 24 semantic categories, and later the participants were required to recall the targets either with (cued recall) or without (free recall) the studied cues. A confidence rating and a report decision were also required, so that we could compute both forced-report quantity and metacognitive resolution (type-2 discrimination), which served as our estimates of early- and late-selection processes, respectively. Consistent with prior research, having fewer categories enhanced the early-selection process (in performance, two > six > 24 categories). However, in contrast, the late-selection process was impaired (24 > six = two categories). In Experiment 2, encoding of paired associates, for which the targets belonged to either two or 20 semantic categories, was manipulated by having participants either form interactive images or engage in rote repetition. Having fewer categories again was associated with enhanced early selection (two > 20 categories); this effect was greater for rote repetition than for interactive imagery, and greater for free recall than for cued recall. However, late selection again showed the opposite pattern (20 > two categories), even with interactive-imagery encoding, which formed distinctive, individuated memory traces. The results are discussed in terms of early- and late-selection processes in retrieval, as well as overt versus covert recognition.

Developing of Individual Instrument Performance Anxiety Scale: ValidityReliability Study

Directory of Open Access Journals (Sweden)

Esra DALKIRAN

2016-07-01

Full Text Available In this study, it is intended to develop a scale unique to our culture, concerning individual instrument performance anxiety of the students who are getting instrument training in the Department of Music Education. In the study, the descriptive research model is used and qualitative research techniques are utilized. The study population consists of the students attending the 23 universities which has Music Education Department. The sample of the study consists of 438 girls and 312 boys, totally 750 students who are studying in the Department of Music Education of randomly selected 10 universities. As a result of the explanatory and confirmatory factor analyses that were performed, a onedimensional structure consisting of 14 items was obtained. Also, t-scores and the coefficient scores of total item correlation concerning the distinguishing power of the items, the difference in the scores of the set of lower and upper 27% was calculated, and it was observed that the items are distinguishing as a result of both analyses. Of the scale, Cronbach's alpha coefficient of internal consistency was calculated as .94, and test-retest reliability coefficient was calculated as .93. As a result, a valid and reliable assessment and evaluation instrument that measures the exam performance anxiety of the students studying in the Department of Music Education, has been developed.

Performance study of ejector cooling cycle at critical mode under superheated primary flow

International Nuclear Information System (INIS)

Tashtoush, Bourhan; Alshare, Aiman; Al-Rifai, Saja

2015-01-01

Highlights: • The ECC is modeled using EES Software and it is validated with published data. • Detailed analysis of the ECC with different refrigerants is conducted. • The constant pressure mixing is better than constant area mixing ejectors. • R134a is the selected refrigerant for the best cooling cycle performance. • The superheated primary flow at critical mode is achieved with EJ2 ejector used. - Abstract: In this work the performance of the ejector cooling cycle is investigated at critical mode, where, the effects of ejector geometry, refrigerant type, and operating condition are studied. The ejector cooling cycle is modeled with EES Software. The mass, momentum, and energy conservation principles are applied to the secondary and primary flows to investigate the performance of the ejector cooling cycle under superheated primary flow. The refrigerant R134 a is selected based on the merit of its environmental and performance characteristics. The primary working fluid in the refrigeration cycle is maintained at superheated conditions for optimal ejector performance. The solar generator temperature ranges are 80–100 °C. The operating temperature of evaporator range is 8–12 °C and the optimal condensation temperature is in the range of 28–40 °C. It is found that constant-pressure mixing ejector generates higher backpressure than constant-area mixing ejector for the same entrainment ratio and COP. The type of ejector is selected based on the performance criteria of the critical backpressure and choking condition of the primary flow, the so called EJ2 type ejector meets the criteria. The COP is found to be in the range of 0.59–0.67 at condenser backpressure of 24 bar due to higher critical condenser pressure and higher generator temperature

Performance analysis of best relay selection scheme for amplify-and-forward cooperative networks in identical Nakagami-m channels

KAUST Repository

Hussain, Syed Imtiaz

2010-06-01

In cooperative communication networks, the use of multiple relays between the source and the destination was proposed to increase the diversity gain. Since the source and all the relays must transmit on orthogonal channels, multiple relay cooperation is considered inefficient in terms of channel resources and bandwidth utilization. To overcome this problem, the concept of best relay selection was recently proposed. In this paper, we analyze the performance of the best relay selection scheme for a cooperative network with multiple relays operating in amplify-and-forward (AF) mode over identical Nakagami-m channels using exact source-relay-destination signal to noise ratio (SNR) expression. We derive accurate closed form expressions for various system parameters including probability density function (pdf) of end-to-end SNR, average output SNR, average probability of bit error and average channel capacity. T he analytical results are verified through extensive simulations. It is shown that the best relay selection scheme performs better than the regular all relay cooperation.

Synthesis of non-steroidal anti-inflammatory drug analogues for selective studies on the COX-II enzyme

International Nuclear Information System (INIS)

Fleming, S.A.; Ridges, M.D.; Jensen, A.W.

1996-01-01

Synthesis of the azido substituted non-steroidal anti-inflammatory drug 2-(2,6-dichloroanilino)phenylacetic acid and isotope labeling of this compound have been performed and are described. Initial evaluation of the binding ability and photoreactivity indicates that this compound has potential for photoaffinity labeling as well as enzyme selectivity studies. (author)

SNR and BER Models and the Simulation for BER Performance of Selected Spectral Amplitude Codes for OCDMA

Directory of Open Access Journals (Sweden)

Abdul Latif Memon

2014-01-01

Full Text Available Many encoding schemes are used in OCDMA (Optical Code Division Multiple Access Network but SAC (Spectral Amplitude Codes is widely used. It is considered an effective arrangement to eliminate dominant noise called MAI (Multi Access Interference. Various codes are studied for evaluation with respect to their performance against three noises namely shot noise, thermal noise and PIIN (Phase Induced Intensity Noise. Various Mathematical models for SNR (Signal to Noise Ratios and BER (Bit Error Rates are discussed where the SNRs are calculated and BERs are computed using Gaussian distribution assumption. After analyzing the results mathematically, it is concluded that ZCC (Zero Cross Correlation Code performs better than the other selected SAC codes and can serve larger number of active users than the other codes do. At various receiver power levels, analysis points out that RDC (Random Diagonal Code also performs better than the other codes. For the power interval between -10 and -20 dBm performance of RDC is better ZCC. Their lowest BER values suggest that these codes should be part of an efficient and cost effective OCDM access network in the future.

Interactive Effect of Motivation, Job Satisfaction, and Job Performance Causal Circular Studies on Sharia Financial Institutions

OpenAIRE

Sinaulan; Noor; wildan

2017-01-01

Research aims to confirm and test the interactive effect of motivation, job satisfaction, and job performance. This study applied to employees of Sharia Financial Institutions in Jakarta. The number of respondents is 70 employees with randomly selected samples stratified. Research analysis data using multiple indicators within analyzed using structural equation model. The results showed that there was a positive interactive effect motivation on job performance and job performance on motivatio...

Optimum location of external markers using feature selection algorithms for real‐time tumor tracking in external‐beam radiotherapy: a virtual phantom study

Science.gov (United States)

Nankali, Saber; Miandoab, Payam Samadi; Baghizadeh, Amin

2016-01-01

In external‐beam radiotherapy, using external markers is one of the most reliable tools to predict tumor position, in clinical applications. The main challenge in this approach is tumor motion tracking with highest accuracy that depends heavily on external markers location, and this issue is the objective of this study. Four commercially available feature selection algorithms entitled 1) Correlation‐based Feature Selection, 2) Classifier, 3) Principal Components, and 4) Relief were proposed to find optimum location of external markers in combination with two “Genetic” and “Ranker” searching procedures. The performance of these algorithms has been evaluated using four‐dimensional extended cardiac‐torso anthropomorphic phantom. Six tumors in lung, three tumors in liver, and 49 points on the thorax surface were taken into account to simulate internal and external motions, respectively. The root mean square error of an adaptive neuro‐fuzzy inference system (ANFIS) as prediction model was considered as metric for quantitatively evaluating the performance of proposed feature selection algorithms. To do this, the thorax surface region was divided into nine smaller segments and predefined tumors motion was predicted by ANFIS using external motion data of given markers at each small segment, separately. Our comparative results showed that all feature selection algorithms can reasonably select specific external markers from those segments where the root mean square error of the ANFIS model is minimum. Moreover, the performance accuracy of proposed feature selection algorithms was compared, separately. For this, each tumor motion was predicted using motion data of those external markers selected by each feature selection algorithm. Duncan statistical test, followed by F‐test, on final results reflected that all proposed feature selection algorithms have the same performance accuracy for lung tumors. But for liver tumors, a correlation‐based feature

JAEA thermodynamic database for performance assessment of geological disposal of high-level and TRU wastes. Selection of thermodynamic data of cobalt and nickel

International Nuclear Information System (INIS)

Kitamura, Akira; Yui, Mikazu; Kirishima, Akira; Saito, Takumi; Shibutani, Sanae; Tochiyama, Osamu

2009-11-01

Within the scope of the JAEA thermodynamic database project for performance assessment of geological disposal of high-level and TRU wastes, the selection of the thermodynamic data on the inorganic compounds and complexes of cobalt and nickel have been carried out. For cobalt, extensive literature survey has been performed and all the obtained literatures have been carefully reviewed to select the thermodynamic data. Selection of thermodynamic data of nickel has been based on a thermodynamic database published by the Nuclear Energy Agency in the Organisation for Economic Co-operation and Development (OECD/NEA), which has been carefully reviewed by the authors, and then thermodynamic data have been selected after surveying latest literatures. Based on the similarity of chemical properties between cobalt and nickel, complementary thermodynamic data of nickel and cobalt species expected under the geological disposal condition have been selected to complete the thermodynamic data set for the performance assessment of geological disposal of radioactive wastes. (author)

Algoritmi selektivnog šifrovanja - pregled sa ocenom performansi / Selective encryption algorithms: Overview with performance evaluation

Directory of Open Access Journals (Sweden)

Boriša Ž. Jovanović

2010-10-01

name says, it consists of encrypting only a subset of the data. The aim of selective encryption is to reduce the amount of data to encrypt while preserving a sufficient level of security. Theoretical foundation of selective encryption The first theoretical foundation of selective encryption was given indirectly by Claude Elwood Shannon in his work about communication theory of secrecy systems. It is well known that statistics for image and video data differ much from classical text data. Indeed, image and video data are strongly correlated and have strong spatial/temporal redundancy. Evaluation criteria for selective encryption algorithm performance evaluation We need to define a set of evaluation criteria that will help evaluating and comparing selective encryption algorithms. - Tunability - Visual degradation - Cryptographic security - Encryption ratio - Compression friendliness - Format compliance - Error tolerance Classification of selective encryption algorithms One possible classification of selective encryption algorithms is relative to when encryption is performed with respect to compression. This classification is adequate since it has intrinsic consequences on selective encryption algorithms behavior. We consider three classes of algorithms as follows: - Precompression - Incompression - Postcompression Overview of selective encryption algorithms In accordance with their precedently defined classification, selective encryption algorithms were compared, briefly described with advantages and disadvantages and their quality was assessed. Applications Selective encryption mechanisms became more and more important and can be applied in many different areas. Some potential application areas of this mechanism are: - Monitoring encrypted content - PDAs (PDA - Personal Digital Assistant, mobile phones, and other mobile terminals - Multiple encryptions - Transcodability/scalability of encrypted content Conclusion As we can see through foregoing analysis, we can notice

Understanding perspectives on sex-selection in India: an intersectional study

OpenAIRE

Sonya Davey, BA; Manisha Sharma, PhD MFA

2014-01-01

Background: Sex-selective abortion results in fewer girls than boys in India (914 girls:1000 boys). To understand perspectives about who is responsible for sex-selective abortion, our aim was to focus on narratives of vastly diverse stakeholders in Indian society. Methods: The qualitative study was undertaken in urban sectors of six northwestern Indian states. Ethnographic unstructured, conversation-style interviews with randomly selected participants were held for an unbiased study. To ca...

JAEA thermodynamic database for performance assessment of geological disposal of high-level and TRU wastes. Selection of thermodynamic data of molybdenum

International Nuclear Information System (INIS)

Kitamura, Akira; Kirishima, Akira; Saito, Takumi; Shibutani, Sanae; Tochiyama, Osamu

2010-06-01

Within the scope of the JAEA thermodynamic database project for performance assessment of geological disposal of high-level radioactive and TRU wastes, the selection of the thermodynamic data on the inorganic compounds and complexes of molybdenum were carried out. We focused to select thermodynamic data of aqueous species and compounds which could form under repository conditions for the disposal of radioactive wastes, i.e. relatively low concentration of molybdenum and from near neutral through alkaline conditions. Selection of thermodynamic data was based on the guidelines by the Nuclear Energy Agency in the Organisation for Economic Co-operation and Development (OECD/NEA). Extensive literature survey was performed and all the obtained articles were carefully reviewed to select the thermodynamic data for molybdenum. Thermodynamic data at 25degC and zero ionic strength were determined from accepted thermodynamic data which were considered to be reliable. We especially paid attention to select formation constant of molybdate ion (MoO 4 2- ) with hydrogen ion (H + ) in detail. This is the first report in showing selection of thermodynamic data for molybdenum with detailed reviewing process. (author)

Implementation and Performance of the Event Filter Muon Selection for the ATLAS experiment at LHC

CERN Document Server

Ventura, A; Assamagan, Ketevi A; Baines, J T M; Bee, C P; Bellomo, M; Biglietti, M; Bogaerts, J A C; Boisvert, V; Bosman, M; Carlino, G; Caron, B; Casado, M P; Cataldi, G; Cavalli, D; Cervetto, M; Comune, G; Conde-Muíño, P; Conventi, F; De Santo, A; De Seixas, J M; Díaz-Gómez, M; Di Mattia, A; Dos Anjos, A; Dosil, M; Ellis, Nick; Emeliyanov, D; Epp, B; Falciano, S; Farilla, A; George, S; Ghete, V M; González, S; Grothe, M; Kabana, S; Khomich, A; Kilvington, G; Konstantinidis, N P; Kootzw, A; Lowe, A; Luminari, L; Maeno, T; Masik, J; Meessen, C; Mello, A G; Merino, G; Moore, R; Morettini, P; Negri, A; Nikitin, N V; Nisati, A; Padilla, C; Panikashvili, N; Parodi, F; Pérez-Réale, V; Pinfold, J L; Pinto, P; Primavera, M; Qian, Z; Resconi, S; Rosati, S; Sánchez, C; Santamarina-Rios, C; Scannicchio, D A; Schiavi, C; Segura, E; Sivoklokov, S Yu; Soluk, R A; Stefanidis, E; Sushkov, S; Sutton, M; Tapprogge, Stefan; Thomas, E; Touchard, F; Venda-Pinto, B; Vercesi, V; Werner, P; 2004 IEEE Nuclear Science Symposium And Medical Imaging Conference

2005-01-01

The ATLAS Trigger system is composed of three levels: an initial hardware trigger level (LVL1) followed by two software-based stages (LVL2 trigger and Event Filter) included in the High Level Trigger (HLT) and implemented on processor farms. The LVL2 trigger starts from LVL1 information concerning pointers to restricted so-called Regions of Interest (ROI) and performs event selection by means of optimized algorithms. If the LVL2 is passed, the full event is built and sent to the Event Filter (EF) algorithms for further selection and classification. After that, events are finally collected and put into mass storage for subsequent physics analysis. Even if many differences arise in the requirements and in the interfaces between the two HLT stages, they have a coherent approach to event selection. Therefore, the design of a common core software framework has been implemented in order to allow the HLT architecture to be flexible to changes (background conditions, luminosity, description of the detector, etc.). Al...

Nanocrystalline Mn-Mo-Ce Oxide Anode Doped Rare Earth Ce and Its Selective Electro-catalytic Performance

Directory of Open Access Journals (Sweden)

SHI Yan-hua

2017-09-01

Full Text Available The anode oxide of nanocrystalline Mn-Mo-Ce was prepared by anode electro-deposition technology, and its nanostructure and selective electro-catalytic performance were investigated using the SEM, EDS, XRD, HRTEM, electrochemical technology and oxygen evolution efficiency testing. Furthermore, the selective electro-catalytic mechanism of oxygen evolution and chlorine depression was discussed. The results show that the mesh-like nanostructure Mn-Mo-Ce oxide anode with little cerium doped is obtained, and the oxygen evolution efficiency for the anode in the seawater is 99.51%, which means a high efficiency for the selective electro-catalytic for the oxygen evolution. Due to the structural characteristics of γ-MnO2, the OH- ion is preferentially absorbed, while Cl- absorption is depressed. OH- accomplishes the oxygen evolution process during the valence transition electrocatalysis of Mn4+/Mn3+, completing the selective electro-catalysis process. Ce doping greatly increases the reaction activity, and promotes the absorption and discharge; the rising interplanar spacing between active (100 crystalline plane promotes OH- motion and the escape of newborn O2, so that the selective electro-catalytic property with high efficient oxygen evolution and chlorine depression is achieved from the nano morphology effect.

Chronic cannabis use and ERP correlates of visual selective attention during the performance of a flanker go/nogo task.

Science.gov (United States)

Nicholls, Clare; Bruno, Raimondo; Matthews, Allison

2015-09-01

The aim of the study was to investigate the relationship between chronic cannabis use and visual selective attention by examining event-related potentials (ERPs) during the performance of a flanker go/nogo task. Male participants were 15 chronic cannabis users (minimum two years use, at least once per week) and 15 drug naive controls. Cannabis users showed longer reaction times compared to controls with equivalent accuracy. Cannabis users also showed a reduction in the N2 'nogo effect' at frontal sites, particularly for incongruent stimuli, and particularly in the right hemisphere. This suggests differences between chronic cannabis users and controls in terms of inhibitory processing within the executive control network, and may implicate the right inferior frontal cortex. There was also preliminary evidence for differences in early selective attention, with controls but not cannabis users showing modulation of N1 amplitude by flanker congruency. Further investigation is required to examine the potential reversibility of these residual effects after long-term abstinence and to examine the role of early selective attention mechanisms in more detail. Copyright © 2015 Elsevier B.V. All rights reserved.

Comparison of Macroeconomic Performance of Selected Asian Countries. An Econometric Analysis of China Economic Growth and Policy Implications

Directory of Open Access Journals (Sweden)

Hasret Benar Balcioglu

2009-09-01

Full Text Available This paper compares the key macroeconomics indicators for the selected countries: China, Malaysia, Indonesia, Korea, Rep. and India and also makes an econometric analysis for China for the period 1961-2007. These countries are chosen on the basis of comparability of data and time without measurement errors. This study also investigates six hypotheses considering the impact of several key macroeconomic variables such as domestic saving rate, domestic investment rate, and volatility of savings, volatility of inflation, growth rate of exports and growth rate of real GNP. By using suitable statistical and econometric tests, this paper finds that prevailing performance of China depends on its superior rates of domestic saving and exports. Policies are also suggested from the differentials between the economic performances of China and other chosen Asian countries.

Study of a Country Level Facility LocationSelection for a Small Company

OpenAIRE

Eterovic, Mirko; Özgül, Simge

2012-01-01

Selection of an optimal facility location is a challenging decision for companies, since it would be costly and dicult to change the location after an installation has been already made. Existing numerical methods in the decision-making process help companies to perform their operations with minimum cost and maximum value based on their strategic objectives. Decision making process requires the selection of relative processes among several alternatives corresponding to a set of location facto...

Improved performance of molecular bulk-heterojunction photovoltaic cells through predictable selection of solvent additives

Energy Technology Data Exchange (ETDEWEB)

Graham, Kenneth R.; Wieruszewski, Patrick M.; Stalder, Romain; Mei, Jianguo [The George and Josephine Butler, Polymer Research Laboratory, Department of Chemistry and Center for Macromolecular Science and Engineering, University of Florida, Gainesville, FL 32611-7200 (United States); Hartel, Michael J.; So, Franky [Department of Materials Science and Engineering, University of Florida, Gainesville, FL 32611 (United States); Reynolds, John R. [The George and Josephine Butler, Polymer Research Laboratory, Department of Chemistry and Center for Macromolecular Science and Engineering, University of Florida, Gainesville, FL 32611-7200 (United States); School of Chemistry and Biochemistry, School of Materials Science and Engineering and Center for Organic Photonics and Electronics, Georgia Institute of Technology, Atlanta, GA 30332-0400 (United States)

2012-11-21

Solvent additives provide an effective means to alter the morphology and thereby improve the performance of organic bulk-heterojunction photovoltaics, although guidelines for selecting an appropriate solvent additive remain relatively unclear. Here, a family of solvent additives spanning a wide range of Hansen solubility parameters is applied to a molecular bulk-heterojunction system consisting of an isoindigo and thiophene containing oligomer as the electron donor and [6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PC{sub 61}BM) as the electron acceptor. Hansen solubility parameters are calculated using the group contribution method and compared with the measured solubilities for use as a screening method in solvent additive selection. The additives are shown to alter the morphologies in a semipredictable manner, with the poorer solvents generally resulting in decreased domain sizes, increased hole mobilities, and improved photovoltaic performance. The additives with larger hydrogen bonding parameters, namely triethylene glycol (TEG) and N-methyl-2-pyrrolidone (NMP), are demonstrated to increase the open circuit voltage by 0.2 V. Combining a solvent additive observed to increase short circuit current, poly(dimethylsiloxane), with TEG results in an increase in power conversion efficiency from 1.4 to 3.3%. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

A STUDY ON THE RISK-ADJUSTED PERFORMANCE OF MUTUAL FUNDS INDUSTRY IN INDIA

Directory of Open Access Journals (Sweden)

Shivangi Agarwal

2017-04-01

Full Text Available Investing through mutual funds has gained interest in recent years as it offers optimal risk adjusted returns to investors. The Indian market is no exception and has witnessed a multifold growth in mutual funds over the years. As of 2016, the Indian market is crowded with over two thousand mutual fund schemes, each promising higher returns compared to their peers. This comes as a challenge for an ordinary investor to select the best portfolio to invest making it critical to analyse the performance of these funds. While understanding and analysing the historical performance of mutual funds do not guarantee future performance, however, this may give an idea of how the fund is likely to perform in different market conditions. In this research we address multiple research issues. These include measuring the performance of selected mutual schemes on the basis of risk and return and compare the performance of these selected schemes with benchmark index to see whether the scheme is outperforming or underperforming the benchmark. We also rank funds on the basis of performance and suggest strategies to invest in a mutual fund and therefore, our findings have significant relevance for investing public.

Selective Audiovisual Semantic Integration Enabled by Feature-Selective Attention.

Science.gov (United States)

Li, Yuanqing; Long, Jinyi; Huang, Biao; Yu, Tianyou; Wu, Wei; Li, Peijun; Fang, Fang; Sun, Pei

2016-01-13

An audiovisual object may contain multiple semantic features, such as the gender and emotional features of the speaker. Feature-selective attention and audiovisual semantic integration are two brain functions involved in the recognition of audiovisual objects. Humans often selectively attend to one or several features while ignoring the other features of an audiovisual object. Meanwhile, the human brain integrates semantic information from the visual and auditory modalities. However, how these two brain functions correlate with each other remains to be elucidated. In this functional magnetic resonance imaging (fMRI) study, we explored the neural mechanism by which feature-selective attention modulates audiovisual semantic integration. During the fMRI experiment, the subjects were presented with visual-only, auditory-only, or audiovisual dynamical facial stimuli and performed several feature-selective attention tasks. Our results revealed that a distribution of areas, including heteromodal areas and brain areas encoding attended features, may be involved in audiovisual semantic integration. Through feature-selective attention, the human brain may selectively integrate audiovisual semantic information from attended features by enhancing functional connectivity and thus regulating information flows from heteromodal areas to brain areas encoding the attended features.

Directional selection in temporally replicated studies is remarkably consistent.

Science.gov (United States)

Morrissey, Michael B; Hadfield, Jarrod D

2012-02-01

Temporal variation in selection is a fundamental determinant of evolutionary outcomes. A recent paper presented a synthetic analysis of temporal variation in selection in natural populations. The authors concluded that there is substantial variation in the strength and direction of selection over time, but acknowledged that sampling error would result in estimates of selection that were more variable than the true values. We reanalyze their dataset using techniques that account for the necessary effect of sampling error to inflate apparent levels of variation and show that directional selection is remarkably constant over time, both in magnitude and direction. Thus we cannot claim that the available data support the existence of substantial temporal heterogeneity in selection. Nonetheless, we conject that temporal variation in selection could be important, but that there are good reasons why it may not appear in the available data. These new analyses highlight the importance of applying techniques that estimate parameters of the distribution of selection, rather than parameters of the distribution of estimated selection (which will reflect both sampling error and "real" variation in selection); indeed, despite availability of methods for the former, focus on the latter has been common in synthetic reviews of the aspects of selection in nature, and can lead to serious misinterpretations. © 2011 The Author(s). Evolution© 2011 The Society for the Study of Evolution.

Study on explosives and their quality performance

Energy Technology Data Exchange (ETDEWEB)

Nabiullah, M.; Pingua, B.M.P.; Jagdish Khan, M.; Emranuzzaman [Central Mining Research Institute, Dhanbad (India)

2005-07-01

There are about forty suppliers of explosive and blasting accessories in India manufacturing site mixed emulsion, site mixed slurry, ANFO, HANFO, packed products, and blasting accessories of use in surface and underground mines. A field laboratory was set up to measure explosive properties of explosive samples, cast booster, detonating fuse, detonators, cord relay, MS connector, and shock tubes. Density, velocity of detonation, water percentage, water resistance, and energy output were considered as the important properties of explosives. A rating system was designed for selection of good explosive products. The delay interval and delay scattering in cord relay and shock tube was studied to improve blast performance. This paper describes in detail the method of measurement and vender rating system for explosive products as per marking system accepted by Coal India. 12 refs., 4 figs., 22 tabs.

Impact of interference on the performance of selection based parallel multiuser scheduling

KAUST Repository

Nam, Sungsik

2012-02-01

In conventional multiuser parallel scheduling schemes, every scheduled user is interfering with every other scheduled user, which limits the capacity and performance of multiuser systems, and the level of interference becomes substantial as the number of scheduled users increases. Based on the above observations, we investigate the trade-off between the system throughput and the number of scheduled users through the exact analysis of the total average sum rate capacity and the average spectral efficiency. Our analytical results can help the system designer to carefully select the appropriate number of scheduled users to maximize the overall throughput while maintaining an acceptable quality of service under certain channel conditions. © 2012 IEEE.

Performance of solenoids versus quadrupoles in focusing and energy selection of laser accelerated protons

OpenAIRE

Hofmann, Ingo

2013-01-01

Using laser accelerated protons or ions for various applications—for example in particle therapy or short-pulse radiographic diagnostics—requires an effective method of focusing and energy selection. We derive an analytical scaling for the performance of a solenoid compared with a doublet/triplet as function of the energy, which is confirmed by TRACEWIN simulations. Generally speaking, the two approaches are equivalent in focusing capability, if parameters are such that the solenoid length ap...

Comparative studies of neodymium (III)-selective PVC membrane sensors

Energy Technology Data Exchange (ETDEWEB)

Gupta, Vinod K., E-mail: vinodfcy@iitr.ernet.in [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India); Goyal, Rajendra N.; Sharma, Ram A. [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247 667 (India)

2009-08-04

Sensors based on two neutral ionophores, N,N'-bis((1H-pyrrol-2-yl)methylene)cyclohexane-1,2-diamine (L{sub 1}) and 3,3'-(cyclohexane-1,2-diylbis(azan-1-yl-1-ylidene) bis(methan-1-yl-1-ylidene)bis(5-hydroxymethyl)pyridine-2-ol) (L{sub 2}) are described for quantification of neodymium (III). Effect of various plasticizers; 2-nitrophenyloctylether (o-NPOE), dibutyl butylphosphonate (DBBP), tri-n-butyl phosphates (TBP), dioctylpthalate (DOP) and chloronapthalen (CN) and anion excluder, sodiumtetraphenylborate (NaTPB) has been studied. The membrane composition of PVC:o-NPOE:ionophore (L{sub 1}):NaTPB (w/w; mg) of 150:300:5:5 exhibited best performance. The sensor with ionophore (L{sub 1}) exhibits significantly enhanced selectivity towards neodymium (III) in the concentration range 5.0 x 10{sup -7} to 1.0 x 10{sup -2} M with a detection limit of 1.0 x 10{sup -7} M and a Nernstian compliance (19.8 {+-} 0.3 mV decade{sup -1} of activity) within pH range 4.0-8.0. The response time of sensor was found as 10 s. The influence of the membrane composition and possible interfering ions has also been investigated on the response properties of the electrode. The fast and stable response, good reproducibility and long-term stability of the sensor are observed. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for neodymium. The proposed electrode shows fairly good discrimination of neodymium (III) from other cations. The application of prepared sensor has been demonstrated in the determination of neodymium (III) in spiked water samples.

Study of in vitro antimicrobial and antiproliferative activities of selected Saharan plants.

Science.gov (United States)

Palici, Ionut F; Liktor-Busa, Erika; Zupkó, István; Touzard, Blaise; Chaieb, Mohamed; Urbán, Edit; Hohmann, Judit

2015-12-01

The aim of the present study was the evaluation of the antimicrobial and antiproliferative activities of selected Saharan species, which are applied in the traditional medicine but not studied thoroughly from chemical and pharmacological point of view. The studied plants, namely Anthyllis henoniana, Centropodia forskalii, Cornulaca monacantha, Ephedra alata var. alenda, Euphorbia guyoniana, Helianthemum confertum, Henophyton deserti, Moltkiopsis ciliata and Spartidium saharae were collected from remote areas of North Africa, especially from the Tunisian region of Sahara. After drying and applying the appropriate extraction methods, the plant extracts were tested in antimicrobial screening assay, performed on 19 Gram-positive and -negative strains of microbes. The inhibition zones produced by plant extracts were determined by disc-diffusion method. Remarkable antibacterial activities were exhibited by extracts of Ephedra alata var. alenda and Helianthemum confertum against B. subtilis, M. catarrhalis and methicillin-resistant and non-resistant S. aureus. Minimum inhibitory concentrations of these two species were also determined. Antiproliferative effects of the extracts were evaluated against 4 human adherent cell lines (HeLa, A431, A2780 and MCF7). Notable cell growth inhibition was found for extract of Helianthemum confertum and Euphorbia guyoniana. Our results provided data for selection of some plant species for further detailed pharmacological and phytochemical examinations.

Selection of performance-tested young bulls and indirect responses in commercial beef cattle herds on pasture and in feedlots.

Science.gov (United States)

Raidan, Fernanda S S; Santos, Dalinne C C; Moraes, Mariana M; Araújo, Andresa E M; Ventura, Henrique T; Bergmann, José A G; Turra, Eduardo M; Toral, Fabio L B

2016-11-09

Central testing is used to select young bulls which are likely to contribute to increased net income of the commercial beef cattle herd. We present genetic parameters for growth and reproductive traits on performance-tested young bulls and commercial animals that are raised on pasture and in feedlots. Records on young bulls and heifers in performance tests or commercial herds were used. Genetic parameters for growth and reproductive traits were estimated. Correlated responses for commercial animals when selection was applied on performance-tested young bulls were computed. The 90% highest posterior density (HPD90) intervals for heritabilities of final weight (FW), average daily gain (ADG) and scrotal circumference (SC) ranged from 0.41 to 0.49, 0.23 to 0.30 and 0.47 to 0.57, respectively, for performance-tested young bulls on pasture, from 0.45 to 0.60, 0.20 to 0.32 and 0.56 to 0.70, respectively, for performance-tested young bulls in feedlots, from 0.29 to 0.33, 0.14 to 0.18 and 0.35 to 0.45, respectively, for commercial animals on pasture, and from 0.24 to 0.44, 0.13 to 0.24 and 0.35 to 0.57 respectively, for commercial animals in feedlots. The HPD90 intervals for genetic correlations of FW, ADG and SC in performance-tested young bulls on pasture (feedlots) with FW, ADG and SC in commercial animals on pasture (feedlots) ranged from 0.86 to 0.96 (0.83 to 0.94), 0.78 to 0.90 (0.40 to 0.79) and from 0.92 to 0.97 (0.50 to 0.83), respectively. Age at first calving was genetically related to ADG (HPD90 interval = -0.48 to -0.06) and SC (HPD90 interval = -0.41 to -0.05) for performance-tested young bulls on pasture, however it was not related to ADG (HPD90 interval = -0.29 to 0.10) and SC (HPD90 interval = -0.35 to 0.13) for performance-tested young bulls in feedlots. Heritabilities for growth and SC are higher for performance-tested young bulls than for commercial animals. Evaluating and selecting for increased growth and SC on performance-tested young bulls is

Performance evaluation of selected crop yield-water use models for wheat crop

Directory of Open Access Journals (Sweden)

H. E. Igbadun

2001-10-01

Full Text Available Crop yield-water use models that provide useful information about the exact form of crop response to different amounts of water used by the crop throughout its growth stages and those that provide adequate information for decisions on optimal use of water in the farm were evaluated. Three crop yield models: Jensen (1968, Minhas et al., (1974 and Bras and Cordova (1981 additive type models were studied. Wheat (Triticum aestivum was planted at the Institute for Agricultural Research Farm during the 1995/96 and 1996/97 irrigation seasons of November to March. The data collected from the field experiments during the 1995/96 planting season were used to calibrate the models and their stress sensitivity factors estimated for four selected growth stages of the wheat crop. The ability of the model to predict grain yield of wheat with the estimated stress sensitivity factors was evaluated by comparing predicted grain yields by each model with those obtained in the field during the 1996/97 season. The three models performed fairly well in predicting grain yields, as the predicted results were not significantly different from the field measured grain yield at 5% level of significance.

Functional Imaging of Audio–Visual Selective Attention in Monkeys and Humans: How do Lapses in Monkey Performance Affect Cross-Species Correspondences?

Science.gov (United States)

Muers, Ross S.; Salo, Emma; Slater, Heather; Petkov, Christopher I.

2017-01-01

Abstract The cross-species correspondences and differences in how attention modulates brain responses in humans and animal models are poorly understood. We trained 2 monkeys to perform an audio–visual selective attention task during functional magnetic resonance imaging (fMRI), rewarding them to attend to stimuli in one modality while ignoring those in the other. Monkey fMRI identified regions strongly modulated by auditory or visual attention. Surprisingly, auditory attention-related modulations were much more restricted in monkeys than humans performing the same tasks during fMRI. Further analyses ruled out trivial explanations, suggesting that labile selective-attention performance was associated with inhomogeneous modulations in wide cortical regions in the monkeys. The findings provide initial insights into how audio–visual selective attention modulates the primate brain, identify sources for “lost” attention effects in monkeys, and carry implications for modeling the neurobiology of human cognition with nonhuman animals. PMID:28419201

A QSAR Study of Environmental Estrogens Based on a Novel Variable Selection Method

Directory of Open Access Journals (Sweden)

Aiqian Zhang

2012-05-01

Full Text Available A large number of descriptors were employed to characterize the molecular structure of 53 natural, synthetic, and environmental chemicals which are suspected of disrupting endocrine functions by mimicking or antagonizing natural hormones and may thus pose a serious threat to the health of humans and wildlife. In this work, a robust quantitative structure-activity relationship (QSAR model with a novel variable selection method has been proposed for the effective estrogens. The variable selection method is based on variable interaction (VSMVI with leave-multiple-out cross validation (LMOCV to select the best subset. During variable selection, model construction and assessment, the Organization for Economic Co-operation and Development (OECD principles for regulation of QSAR acceptability were fully considered, such as using an unambiguous multiple-linear regression (MLR algorithm to build the model, using several validation methods to assessment the performance of the model, giving the define of applicability domain and analyzing the outliers with the results of molecular docking. The performance of the QSAR model indicates that the VSMVI is an effective, feasible and practical tool for rapid screening of the best subset from large molecular descriptors.

Selection of lactic acid bacteria as a probiotic and evaluated its performance on gnotobiotic catfish Clarias sp.

Directory of Open Access Journals (Sweden)

Enita Romasni Turnip

2018-05-01

Full Text Available ABSTRACT This study aimed to select lactic acid bacteria (LAB as a potential probiotic that producing anti‒microbial compounds in order to treat motile aeromonads septicemia diseases caused by Aeromonas hydrophila on catfish Clarias sp. and evaluated its performance on gnotobiotic catfish. The in vitro assay was done to select several LAB isolates based on antagonistic activity against pathogenic bacteria. The selected isolate was tested in vivo to observe their ability to improve growth performances of catfish. The study was conducted with five treatments consists of K‒ (normal catfish without addition probiotic, without challenge test, K+ (normal catfish without addition of probiotic, with challenge test, Np (normal catfish with addition of probiotic and challenge test, G (gnoto catfish without addition of probiotic, with challenge test, and Gp (gnoto catfish with addition of probiotic and challenge test. The results showed that the addition of Pediococcus pentosaceus E2211 as selected probiotic could increase survival rate, specific growth rate, and immune response towards infection of A. hydrophila. The best survival rate after challenge test was obtained in Np and Gp treatments (88.46%, followed by G treatment (65.38%, while the K+ was only 53.84%. The conclusion of this study was P. pentosaceus E2211 potentially used as a probiotic candidate for normal and gnotobiotic catfish. The presence of normal microflora with P. pentosaceus E2211 in Np treatment showed the best probiotic performance with daily growth rate 3.28%, feed conversion ratio 1.79, and total intestinal bacteria reached 108 CFU/mL significantly different from other treatments (P<0.05.Keywords: Aeromonas hydrophila, catfish, LAB, probiotic, screening  ABSTRAKTujuan penelitian ini adalah menyeleksi bakteri asam laktat (BAL sebagai probiotik potensial penghasil senyawa antimikrob guna menanggulangi penyakit motile aeromonad septicemia akibat Aeromonas hydrophila pada ikan

Predicting higher selection in elite junior Australian Rules football: The influence of physical performance and anthropometric attributes.

Science.gov (United States)

Robertson, Sam; Woods, Carl; Gastin, Paul

2015-09-01

To develop a physiological performance and anthropometric attribute model to predict Australian Football League draft selection. Cross-sectional observational. Data was obtained (n=4902) from three Under-18 Australian football competitions between 2010 and 2013. Players were allocated into one of the three groups, based on their highest level of selection in their final year of junior football (Australian Football League Drafted, n=292; National Championship, n=293; State-level club, n=4317). Physiological performance (vertical jumps, agility, speed and running endurance) and anthropometric (body mass and height) data were obtained. Hedge's effect sizes were calculated to assess the influence of selection-level and competition on these physical attributes, with logistic regression models constructed to discriminate Australian Football League Drafted and National Championship players. Rule induction analysis was undertaken to determine a set of rules for discriminating selection-level. Effect size comparisons revealed a range of small to moderate differences between State-level club players and both other groups for all attributes, with trivial to small differences between Australian Football League Drafted and National Championship players noted. Logistic regression models showed multistage fitness test, height and 20 m sprint time as the most important attributes in predicting Draft success. Rule induction analysis showed that players displaying multistage fitness test scores of >14.01 and/or 20 m sprint times of football players being recruited to the highest level of the sport. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

A multicenter study of routine versus selective intraoperative leak testing for sleeve gastrectomy.

Science.gov (United States)

Bingham, Jason; Kaufman, Jedediah; Hata, Kai; Dickerson, James; Beekley, Alec; Wisbach, Gordon; Swann, Jacob; Ahnfeldt, Eric; Hawkins, Devon; Choi, Yong; Lim, Robert; Martin, Matthew

2017-09-01

Staple line leaks after sleeve gastrectomy are dreaded complications. Many surgeons routinely perform an intraoperative leak test (IOLT) despite little evidence to validate the reliability, clinical benefit, and safety of this procedure. To determine the efficacy of IOLT and if routine use has any benefit over selective use. Eight teaching hospitals, including private, university, and military facilities. A multicenter, retrospective analysis over a 5-year period. The efficacy of the IOLT for identifying unsuspected staple line defects and for predicting postoperative leaks was evaluated. An anonymous survey was also collected reflecting surgeons' practices and beliefs regarding IOLT. From January 2010 through December 2014, 4284 patients underwent sleeve gastrectomy. Of these, 37 patients (.9%) developed a postoperative leak, and 2376 patients (55%) received an IOLT. Only 2 patients (0.08%) had a positive finding. Subsequently, 21 patients with a negative IOLT developed a leak. IOLT demonstrated a sensitivity of only 8.7%. There was a nonsignificant trend toward increased leak rates when an IOLT was performed versus when IOLT was not performed. Leak rates were not statistically different between centers that routinely perform IOLT versus those that selectively perform IOLT. Routine IOLT had very poor sensitivity and was negative in 91% of patients who later developed postoperative leaks. The use of IOLT was not associated with a decrease in the incidence of postoperative leaks, and routine IOLT had no benefit over selective leak testing. IOLT should not be used as a quality indicator or "best practice" for bariatric surgery. Published by Elsevier Inc.

STUDY REGARDING THE DETERMINATION OF THE FINANCIAL PERFORMANCE OF A COMPANY THROUGH MARKET RATES

Directory of Open Access Journals (Sweden)

Nicolae Baltes

2015-11-01

Full Text Available Determining the financial performance of an enterprise is necessary when making the decision to invest, which represents the proper selection of securities and the appropriate moment to enter on the market, meaning the time to purchase the securities. The study’s objective is to define, determinate and interpret the market rates, that are used in financial analysis in order to measure the company’s performance. The study, conducted on a Romanian company listed on the Bucharest Stock Exchange, leads to the conclusion that because of the financial crisis, the company’s financial performance was significantly affected.

Material Selection for Competition–A Case Study for Air Coolers

Directory of Open Access Journals (Sweden)

Luma A. H. Al Kindi

2018-02-01

Full Text Available Competition is one of the most important challenges that is facing the marketing of industrial products in today's markets. In this research study of the impact of material selection factor for air coolers of different materials is applied. Investigation on the air cooler windows which are part of the body of air coolers is conducted. Corrosion resistance, thermal conductivity, strength of material, weight, shape, cost and manufacturing process are the factors that are applied and calculated on three types of materials Aluminum, Galvanized steel and polypropylene. The physical properties of the three mentioned materials are used to calculate Merit Index .The corrosion average, according to Tafel Method depending the corrosion current and adopting contactors for the anodic and cathodic metals behaviors is performed. ANSYS is adopted using the three samples for the selected materials Aluminum, Galvanized steel and polypropylene to measure maximum stress and deflection are measured. Accordingly, the results are compared to choose the best alternative. It is observed that the polypropylene is the best choice depending three factors while the aluminum material is better depending two factors and the galvanized steel is regarded as the best in only one factor, the rest factors are identical when choosing  an alternative material for manufacturing the air cooler windows.

The relation between flexibility of human resources and performance indexes of selected hospitals of Tehran Medical Sciences University

Directory of Open Access Journals (Sweden)

Noushin Alibakhshi

2016-12-01

Full Text Available Today, flexibility has turned to one of important issues in management theories and policies and most current discussions about flexibility patterns focus on management policies, so that these patterns are one of important aspects of human resources strategic management. This study was performed with the aim of assessing the flexibility rate of human resources and performance indexes of Tehran Medical Sciences University hospitals and determining the possible relation between these variables. The present study is descriptive – analytical which was conducted in cross-sectional form in 2015. The statistical population was selected by stratifies random sampling method as 317 persons from nursing, administrative and financial personnel of 5 hospitals of Tehran Medical Sciences University. Data collecting toll was hospitals performance indexes form and Wright & Snell flexibility questionnaire of human resources. Data analysis was performed using SPSS 18 software and with the aid of descriptive statistical indexes and linear regression analysis. The results showed that personnel ( human resources had high flexibility = 4.16.\tthere was a significant relation between total flexibility and the index of bed circulation so that by one unit increase in bed circulation space, normally, the average of total flexibility decreased 0.64 units ( p-value<0.05. The results showed that human resources of Tehran Medical Sciences University hospitals have high flexibility, so authorities and policy makers are suggested to adopt policies of human resources management for creating flexibility in human resources and improving hospitals performance and amending hospitals status.

Personality, personnel selection, and job performance

NARCIS (Netherlands)

D. van der Linden (Dimitri); D.H.M. Pelt (Dirk); C.S. Dunkel (Curtis); M.Ph. Born (Marise)

2017-01-01

markdownabstractJob Performance: The term job performance can either refer to the objective or subjective outcomes one achieves in a specific job (e.g., the profit of a sales persons, the number of publications of a scientist, the number of successful operations of a surgeon) or to work-related

An interactive roof bolting selection and performance system

Energy Technology Data Exchange (ETDEWEB)

Agioutantis, Z.; Stiakakis, C.; Stiakakis, N. [Technical Univ. of Crete, Chania (Greece); Karmis, M. [Virginia Polytechnic Inst. and State Univ. (United States)

2001-07-01

In the last decades, bolting has become one of the most dominant support methods in underground construction, including both mining as well as civil engineering applications. A variety of bolt types has been developed in order to meet the support needs of different geological and geotechnical settings. The selection of the appropriate bolt type, as well as the troubleshooting procedures in case of failure or suspected failure, are often complex and require extensive experience. To facilitate bolt type selection as well as troubleshooting, various tools have been presented in the form of nomograms, computer programs or trouble shooting guides. The approach described in this paper incorporates information and data developed by laboratory and field investigations and has led to the development of a dynamic knowledge base system that can aid in the selection of appropriate bolting systems and, also, help troubleshoot existing installations. Additionally, the user can enhance the functionality of the existing database with site-specific information and geological behavior as experienced by field personnel. The package is developed as a Windows trademark based application, where data is stored in Microsoft Access trademark database. (orig.)

Selection of the battery pack parameters for an electric vehicle based on performance requirements

Science.gov (United States)

Koniak, M.; Czerepicki, A.

2017-06-01

Each type of vehicle has specific power requirements. Some require a rapid charging, other make long distances between charges, but a common feature is the longest battery life time. Additionally, the battery is influenced by factors such as temperature, depth of discharge and the operation current. The article contain the parameters of chemical cells that should be taken into account during the design of the battery for a specific application. This is particularly important because the batteries are not properly matched and can wear prematurely and cause an additional costs. The method of selecting the correct cell type should take previously discussed features and operating characteristics of the vehicle into account. The authors present methods of obtaining such characteristics along with their assessment and examples. Also there has been described an example of the battery parameters selection based on design assumptions of the vehicle and the expected performance characteristics. Selecting proper battery operating parameters is important due to its impact on the economic result of investments in electric vehicles. For example, for some Li-Ion technologies, the earlier worn out of batteries in a fleet of cruise boats or buses having estimated lifetime of 10 years is not acceptable, because this will cause substantial financial losses for the owner of the rolling stock. The presented method of choosing the right cell technology in the selected application, can be the basis for making the decision on future battery technical parameters.

Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting.

Science.gov (United States)

Van Hooreweder, Brecht; Apers, Yanni; Lietaert, Karel; Kruth, Jean-Pierre

2017-01-01

This paper provides new insights into the fatigue properties of porous metallic biomaterials produced by additive manufacturing. Cylindrical porous samples with diamond unit cells were produced from Ti6Al4V powder using Selective Laser Melting (SLM). After measuring all morphological and quasi-static properties, compression-compression fatigue tests were performed to determine fatigue strength and to identify important fatigue influencing factors. In a next step, post-SLM treatments were used to improve the fatigue life of these biomaterials by changing the microstructure and by reducing stress concentrators and surface roughness. In particular, the influence of stress relieving, hot isostatic pressing and chemical etching was studied. Analytical and numerical techniques were developed to calculate the maximum local tensile stress in the struts as function of the strut diameter and load. With this method, the variability in the relative density between all samples was taken into account. The local stress in the struts was then used to quantify the exact influence of the applied post-SLM treatments on the fatigue life. A significant improvement of the fatigue life was achieved. Also, the post-SLM treatments, procedures and calculation methods can be applied to different types of porous metallic structures and hence this paper provides useful tools for improving fatigue performance of metallic biomaterials. Additive Manufacturing (AM) techniques such as Selective Laser Melting (SLM) are increasingly being used for producing customized porous metallic biomaterials. These biomaterials are regularly used for biomedical implants and hence a long lifetime is required. In this paper, a set of post-built surface and heat treatments is presented that can be used to significantly improve the fatigue life of porous SLM-Ti6Al4V samples. In addition, a novel and efficient analytical local stress method was developed to accurately quantify the influence of the post

Study on behaviors and performances of universal N-glycopeptide enrichment methods.

Science.gov (United States)

Xue, Yu; Xie, Juanjuan; Fang, Pan; Yao, Jun; Yan, Guoquan; Shen, Huali; Yang, Pengyuan

2018-04-16

Glycosylation is a crucial process in protein biosynthesis. However, the analysis of glycopeptides through MS remains challenging due to the microheterogeneity and macroheterogeneity of the glycoprotein. Selective enrichment of glycopeptides from complex samples prior to MS analysis is essential for successful glycoproteome research. In this work, we systematically investigated the behaviors and performances of boronic acid chemistry, ZIC-HILIC, and PGC of glycopeptide enrichment to promote understanding of these methods. We also optimized boronic acid chemistry and ZIC-HILIC enrichment methods and applied them to enrich glycopeptides from mouse liver. The intact N-glycopeptides were interpreted using the in-house analysis software pGlyco 2.0. We found that boronic acid chemistry in this study preferred to capture glycopeptides with high mannose glycans, ZIC-HILIC enriched most N-glycopeptides and did not show significant preference during enrichment and PGC was not suitable for separating glycopeptides with a long amino acid sequence. We performed a detailed study on the behaviors and performances of boronic acid chemistry, ZIC-HILIC, and PGC enrichment methods and provide a better understanding of enrichment methods for further glycoproteomics research.

Factors of School Effectiveness and Performance of Selected Public and Private Elementary Schools: Implications on Educational Planning in the Philippines

Directory of Open Access Journals (Sweden)

Gilbert C. Magulod Jr.

2017-02-01

Full Text Available What defines effective school is the necessity of the school community to tailor interventions to improve quality of education. This study determined the factors of school effectiveness and level of school performance of private and public elementary schools in the Second Congressional District of Cagayan Province, Philippines. The study made use of mixed-method research. For quantitative, the descriptive correlational method was used to identify the relationship between school effectiveness and school performance. Factorial analysis was also used to identify the principal components of school effectiveness of private and public elementary schools. The participants of the study were the 182 public and private elementary school principals and teachers from the 20 sampled schools. School effectiveness was measured using the seven correlates of effective schools. On the other hand, the level of school performance was gauged through the National Achievement Test (NAT results for the past three years. The qualitative part of the study focused on the school effectiveness practices and NAT practices of selected private and public elementary schools. The findings of the study revealed that the level of school effectiveness of both private and public elementary schools was excellent. However, test of difference showed that public schools exhibited stronger home-school relations than the private schools. In terms of the level of school performance, public schools perform better than the private schools for the past three years. Significantly, there exists a strong positive relationship between school effectiveness and school performance. The factorial analysis revealed that among all the correlates of school effectiveness, school leadership competency and professional collaboration influenced the performance of both schools. Recommendations of the study can help the government and school officials to plan appropriate strategies in improving the quality of

JAEA thermodynamic database for performance assessment of geological disposal of high-level and TRU wastes. Selection of thermodynamic data of selenium

International Nuclear Information System (INIS)

Doi, Reisuke; Kitamura, Akira; Yui, Mikazu

2010-02-01

Within the scope of the JAEA thermodynamic database project for performance assessment of geological disposal of high-level and TRU radioactive wastes, the selection of the thermodynamic data on the inorganic compounds and complexes of selenium was carried out. Selection of thermodynamic data of selenium was based on a thermodynamic database of selenium published by the Nuclear Energy Agency in the Organisation for Economic Co-operation and Development (OECD/NEA). The remarks of a thermodynamic database by OECD/NEA found by the authors were noted in this report and then thermodynamic data was reviewed after surveying latest literatures. Some thermodynamic values of iron selenides were not selected by the OECD/NEA due to low reliability. But they were important for the performance assessment of geological disposal of radioactive wastes, so we selected them as a tentative value with specifying reliability and needs of the value to be determined. (author)

A study on the implementation of the performance of electrical products standards

Energy Technology Data Exchange (ETDEWEB)

Berkowitz, M A

1984-03-01

The Steering Committee on Electrical Products (SCOPEP) has developed a number of performance standards for selected electrical products and product attributes, under the direction of the Canadian Standards Association. Although the development of these standards shows that a successful standards writing process is in place, the initiation and implementation has been achieved by one or more stakeholder groups spearheading the requirement for the standard. As a result, SCOPEP has been unable to achieve its full potential in its role of developing peformance standards for electrical products. A study was undertaken with the aim of developing a strategic plan for SCOPEP which would be supported by marketing and other strategies. The major elements of the strategy include: selecting those products for which the benefits of a standards program significantly outweigh the costs; agreeing on the use of a framework which rigorously evaluates the cost-benefits of developing performance standards; producing a critical mass of products through the selection process so that revenues from label fees will ultimately balance program costs and support a full time SCOPEP secretariat; aggressively marketing the standards in all sectors, using a balanced push-and-pull strategy; and developing a protagonist attitude so that standards programs implemented are credible to all SCOPEP stakeholders. Detailed cost-benefit tables are appended. 11 figs., 18 tabs.

Performance Evaluation of Relay Selection Schemes in Beacon-Assisted Dual-Hop Cognitive Radio Wireless Sensor Networks under Impact of Hardware Noises.

Science.gov (United States)

Hieu, Tran Dinh; Duy, Tran Trung; Dung, Le The; Choi, Seong Gon

2018-06-05

To solve the problem of energy constraints and spectrum scarcity for cognitive radio wireless sensor networks (CR-WSNs), an underlay decode-and-forward relaying scheme is considered, where the energy constrained secondary source and relay nodes are capable of harvesting energy from a multi-antenna power beacon (PB) and using that harvested energy to forward the source information to the destination. Based on the time switching receiver architecture, three relaying protocols, namely, hybrid partial relay selection (H-PRS), conventional opportunistic relay selection (C-ORS), and best opportunistic relay selection (B-ORS) protocols are considered to enhance the end-to-end performance under the joint impact of maximal interference constraint and transceiver hardware impairments. For performance evaluation and comparison, we derive the exact and asymptotic closed-form expressions of outage probability (OP) and throughput (TP) to provide significant insights into the impact of our proposed protocols on the system performance over Rayleigh fading channel. Finally, simulation results validate the theoretical results.

Functional Imaging of Audio-Visual Selective Attention in Monkeys and Humans: How do Lapses in Monkey Performance Affect Cross-Species Correspondences?

Science.gov (United States)

Rinne, Teemu; Muers, Ross S; Salo, Emma; Slater, Heather; Petkov, Christopher I

2017-06-01

The cross-species correspondences and differences in how attention modulates brain responses in humans and animal models are poorly understood. We trained 2 monkeys to perform an audio-visual selective attention task during functional magnetic resonance imaging (fMRI), rewarding them to attend to stimuli in one modality while ignoring those in the other. Monkey fMRI identified regions strongly modulated by auditory or visual attention. Surprisingly, auditory attention-related modulations were much more restricted in monkeys than humans performing the same tasks during fMRI. Further analyses ruled out trivial explanations, suggesting that labile selective-attention performance was associated with inhomogeneous modulations in wide cortical regions in the monkeys. The findings provide initial insights into how audio-visual selective attention modulates the primate brain, identify sources for "lost" attention effects in monkeys, and carry implications for modeling the neurobiology of human cognition with nonhuman animals. © The Author 2017. Published by Oxford University Press.

Treatability studies performed in support of an engineering evaluation/cost analysis

International Nuclear Information System (INIS)

Myers, J.M.; Mueller, J.P.; Sundquist, J.A.; Moore, G.W.

1995-01-01

The Southern Shipbuilding Corporation (SSC) site is located on 54 acres of wooded land adjacent to Bayou Bonfouca, approximately 1.8 miles downstream of the Bayou Bonfouca National Priorities List (NPL) Superfund site in Slidell, St. Tammany Parish, Louisiana. Two one-acre, impoundments on the SSC site were used to store wastes generated from vessel cleaning. Wastes stored in the impoundments are migrating into Bayou Bonfouca, which empties into Lake Pontchartrain. In addition, the impoundments are frequently invaded by flood waters. The US EPA Emergency Response Branch (EPA-ERB) performed a site investigation which indicated that the majority of the contamination is petroleum-related and that the compounds of concern are polycyclic aromatic hydrocarbons (PARs). The wastes are generally contained with the two impoundments and surrounding soils. As part of an Engineering Evaluation/Cost Basis (EE/CA) of potential response action alternatives, four treatability studies were performed. A thermal treatment (incineration) study was performed at the EPA's Incineration Research Facility (IRF). Biodegradation remedy selection feasibility assessment was conducted on-site. A remedy screening soil washing study was also performed by TAT. A solidification/stabilization (S/S) study was conducted through EPA's Risk Reduction Engineering Laboratory (RREL) to ascertain if the PAHs could be immobilized within a solid matrix. Experimental objectives, dead methodology and conclusions for these studies are presented as they relate to potential response actions being evaluated at the SSC site

Different effects of anterior temporal lobectomy and selective amygdalohippocampectomy on verbal memory performance of patients with epilepsy.

Science.gov (United States)

Boucher, Olivier; Dagenais, Emmanuelle; Bouthillier, Alain; Nguyen, Dang Khoa; Rouleau, Isabelle

2015-11-01

The advantage of selective amygdalohippocampectomy (SAH) over anterior temporal lobectomy (ATL) for the treatment of temporal lobe epilepsy (TLE) remains controversial. Because ATL is more extensive and involves the lateral and medial parts of the temporal lobe, it may be predicted that its impact on memory is more important than SAH, which involves resection of medial temporal structures only. However, several studies do not support this assumption. Possible explanations include task-specific factors such as the extent of semantic and syntactic information to be memorized and failure to control for main confounders. We compared preoperative vs. postoperative memory performance in 13 patients with SAH with 26 patients who underwent ATL matched on side of surgery, IQ, age at seizure onset, and age at surgery. Memory function was assessed using the Logical Memory subtest from the Wechsler Memory Scales - 3rd edition (LM-WMS), the Rey Auditory Verbal Learning Test (RAVLT), the Digit Span subtest from the Wechsler Adult Intelligence Scale, and the Rey-Osterrieth Complex Figure Test. Repeated measures analyses of variance revealed opposite effects of SAH and ATL on the two verbal learning memory tests. On the immediate recall trial of the LM-WMS, performance deteriorated after ATL in comparison with that after SAH. By contrast, on the delayed recognition trial of the RAVLT, performance deteriorated after SAH compared with that after ATL. However, additional analyses revealed that the latter finding was only observed when surgery was conducted in the right hemisphere. No interaction effects were found on other memory outcomes. The results are congruent with the view that tasks involving rich semantic content and syntactical structure are more sensitive to the effects of lateral temporal cortex resection as compared with mesiotemporal resection. The findings highlight the importance of task selection in the assessment of memory in patients undergoing TLE surgery

An Empirical Study of Wrappers for Feature Subset Selection based on a Parallel Genetic Algorithm: The Multi-Wrapper Model

KAUST Repository

Soufan, Othman

2012-09-01

Feature selection is the first task of any learning approach that is applied in major fields of biomedical, bioinformatics, robotics, natural language processing and social networking. In feature subset selection problem, a search methodology with a proper criterion seeks to find the best subset of features describing data (relevance) and achieving better performance (optimality). Wrapper approaches are feature selection methods which are wrapped around a classification algorithm and use a performance measure to select the best subset of features. We analyze the proper design of the objective function for the wrapper approach and highlight an objective based on several classification algorithms. We compare the wrapper approaches to different feature selection methods based on distance and information based criteria. Significant improvement in performance, computational time, and selection of minimally sized feature subsets is achieved by combining different objectives for the wrapper model. In addition, considering various classification methods in the feature selection process could lead to a global solution of desirable characteristics.

Selective reminding of prospective memory in Multiple Sclerosis.

Science.gov (United States)

McKeever, Joshua D; Schultheis, Maria T; Sim, Tiffanie; Goykhman, Jessica; Patrick, Kristina; Ehde, Dawn M; Woods, Steven Paul

2017-04-19

Multiple sclerosis (MS) is associated with prospective memory (PM) deficits, which may increase the risk of poor functional/health outcomes such as medication non-adherence. This study examined the potential benefits of selective reminding to enhance PM functioning in persons with MS. Twenty-one participants with MS and 22 healthy adults (HA) underwent a neuropsychological battery including a Selective Reminding PM (SRPM) experimental procedure. Participants were randomly assigned to either: (1) a selective reminding condition in which participants learn (to criterion) eight prospective memory tasks in a Selective Reminding format; or (2) a single trial encoding condition (1T). A significant interaction was demonstrated, with MS participants receiving greater benefit than HAs from the SR procedure in terms of PM performance. Across diagnostic groups, participants in the SR conditions (vs. 1T conditions) demonstrated significantly better PM performance. Individuals with MS were impaired relative to HAs in the 1T condition, but performance was statistically comparable in the SR condition. This preliminary study suggests that selective reminding can be used to enhance PM cue detection and retrieval in MS. The extent to which selective reminding of PM is effective in naturalistic settings and for health-related behaviours in MS remains to be determined.

Do personality traits assessed on medical school admission predict exit performance? A UK-wide longitudinal cohort study.

Science.gov (United States)

MacKenzie, R K; Dowell, J; Ayansina, D; Cleland, J A

2017-05-01

Traditional methods of assessing personality traits in medical school selection have been heavily criticised. To address this at the point of selection, "non-cognitive" tests were included in the UK Clinical Aptitude Test, the most widely-used aptitude test in UK medical education (UKCAT: http://www.ukcat.ac.uk/ ). We examined the predictive validity of these non-cognitive traits with performance during and on exit from medical school. We sampled all students graduating in 2013 from the 30 UKCAT consortium medical schools. Analysis included: candidate demographics, UKCAT non-cognitive scores, medical school performance data-the Educational Performance Measure (EPM) and national exit situational judgement test (SJT) outcomes. We examined the relationships between these variables and SJT and EPM scores. Multilevel modelling was used to assess the relationships adjusting for confounders. The 3343 students who had taken the UKCAT non-cognitive tests and had both EPM and SJT data were entered into the analysis. There were four types of non-cognitive test: (1) libertariancommunitarian, (2) NACE-narcissism, aloofness, confidence and empathy, (3) MEARS-self-esteem, optimism, control, self-discipline, emotional-nondefensiveness (END) and faking, (4) an abridged version of 1 and 2 combined. Multilevel regression showed that, after correcting for demographic factors, END predicted SJT and EPM decile. Aloofness and empathy in NACE were predictive of SJT score. This is the first large-scale study examining the relationship between performance on non-cognitive selection tests and medical school exit assessments. The predictive validity of these tests was limited, and the relationships revealed do not fit neatly with theoretical expectations. This study does not support their use in selection.

Academic Talent Selection in Grant Review Panels

NARCIS (Netherlands)

Arensbergen, P. van; Weijden, I. van der; Besselaar, P van den; Prpic, K.; Weijden, I. van der; Aseulova, N.

2014-01-01

Career grants are an important instrument for selecting and stimulating the next generation of leading researchers. Earlier research has mainly focused on the relation between past performance and success. In this study we investigate the evidence of talent and how the selection process takes place.

A fast multilocus test with adaptive SNP selection for large-scale genetic-association studies

KAUST Repository

Zhang, Han

2013-09-11

As increasing evidence suggests that multiple correlated genetic variants could jointly influence the outcome, a multilocus test that aggregates association evidence across multiple genetic markers in a considered gene or a genomic region may be more powerful than a single-marker test for detecting susceptibility loci. We propose a multilocus test, AdaJoint, which adopts a variable selection procedure to identify a subset of genetic markers that jointly show the strongest association signal, and defines the test statistic based on the selected genetic markers. The P-value from the AdaJoint test is evaluated by a computationally efficient algorithm that effectively adjusts for multiple-comparison, and is hundreds of times faster than the standard permutation method. Simulation studies demonstrate that AdaJoint has the most robust performance among several commonly used multilocus tests. We perform multilocus analysis of over 26,000 genes/regions on two genome-wide association studies of pancreatic cancer. Compared with its competitors, AdaJoint identifies a much stronger association between the gene CLPTM1L and pancreatic cancer risk (6.0 × 10(-8)), with the signal optimally captured by two correlated single-nucleotide polymorphisms (SNPs). Finally, we show AdaJoint as a powerful tool for mapping cis-regulating methylation quantitative trait loci on normal breast tissues, and find many CpG sites whose methylation levels are jointly regulated by multiple SNPs nearby.

A Comparative Investigation of the Combined Effects of Pre-Processing, Wavelength Selection, and Regression Methods on Near-Infrared Calibration Model Performance.

Science.gov (United States)

Wan, Jian; Chen, Yi-Chieh; Morris, A Julian; Thennadil, Suresh N

2017-07-01

Near-infrared (NIR) spectroscopy is being widely used in various fields ranging from pharmaceutics to the food industry for analyzing chemical and physical properties of the substances concerned. Its advantages over other analytical techniques include available physical interpretation of spectral data, nondestructive nature and high speed of measurements, and little or no need for sample preparation. The successful application of NIR spectroscopy relies on three main aspects: pre-processing of spectral data to eliminate nonlinear variations due to temperature, light scattering effects and many others, selection of those wavelengths that contribute useful information, and identification of suitable calibration models using linear/nonlinear regression . Several methods have been developed for each of these three aspects and many comparative studies of different methods exist for an individual aspect or some combinations. However, there is still a lack of comparative studies for the interactions among these three aspects, which can shed light on what role each aspect plays in the calibration and how to combine various methods of each aspect together to obtain the best calibration model. This paper aims to provide such a comparative study based on four benchmark data sets using three typical pre-processing methods, namely, orthogonal signal correction (OSC), extended multiplicative signal correction (EMSC) and optical path-length estimation and correction (OPLEC); two existing wavelength selection methods, namely, stepwise forward selection (SFS) and genetic algorithm optimization combined with partial least squares regression for spectral data (GAPLSSP); four popular regression methods, namely, partial least squares (PLS), least absolute shrinkage and selection operator (LASSO), least squares support vector machine (LS-SVM), and Gaussian process regression (GPR). The comparative study indicates that, in general, pre-processing of spectral data can play a significant

Reproductive performance in a select sample of dairy herds.

Science.gov (United States)

Ferguson, James D; Skidmore, Andrew

2013-02-01

Sixteen herds were selected from a pool of 64 herds nominated by consultants for participation in a national survey to demonstrate excellence in reproductive performance. For inclusion in the survey, herds had to have comprehensive records in a farm computer database or participate in a Dairy Herd Improvement Association record system and have superior reproductive performance as judged by the herd advisor. Herd managers were asked to fill out a questionnaire to describe their reproductive management practices and provide herd records for data analysis. Reproductive analysis was based on individual cow records for active and cull dairy cows that calved during the calendar year 2010. Breeding records by cow were used to calculate indices for insemination rate (IR), conception rate (CR), pregnancy rate (PR), and culling. Herds ranged in size from 262 to 6,126 lactating and dry cows, with a mean of 1,654 [standard deviation (SD) 1,494] cows. Mean days to first insemination (DFS) was 71.2d (SD 4.7d), and IR for first insemination was 86.9%. Mean days between inseminations were 33.4d (SD 3.1d), and 15.4% of insemination intervals were greater than 48 d (range: 7.2 to 21.5%). First-service conception rate was 44.4% (SD 4.8%) across all herds and ranged from 37.5 to 51.8%. Mean PR was 32.0% (SD 3.9%) with a range of 26.5 to 39.4%. Lactation cull rate was 32.2% (SD 12.4%) with a range from 13.6 to 58.1%. Compared with mean data and SD for herds in the Raleigh Dairy Herd Improvement Association system, mean indices for these herds ranked them in the 99 th percentile for IR (using heat detection rate as comparison), 99 th percentile for PR, the bottom 18.6 percentile for DFS, and around the 50th percentile for CR. This suggests that excellent herd reproductive performance was associated with reproductive management that resulted in high insemination rates combined with average CR. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights

An observational study of road safety around selected primary ...

African Journals Online (AJOL)

Materials and Methods: A multistage sampling technique was used to select 46 of the 74 schools in the study area. Some (11) of the selected schools were sited within the same premises and shared a common entrance; thus a total of 35 school premises were eventually observed. Trained research assistants observed the ...

Construct-level predictive validity of educational attainment and intellectual aptitude tests in medical student selection: meta-regression of six UK longitudinal studies

Science.gov (United States)

2013-01-01

Background Measures used for medical student selection should predict future performance during training. A problem for any selection study is that predictor-outcome correlations are known only in those who have been selected, whereas selectors need to know how measures would predict in the entire pool of applicants. That problem of interpretation can be solved by calculating construct-level predictive validity, an estimate of true predictor-outcome correlation across the range of applicant abilities. Methods Construct-level predictive validities were calculated in six cohort studies of medical student selection and training (student entry, 1972 to 2009) for a range of predictors, including A-levels, General Certificates of Secondary Education (GCSEs)/O-levels, and aptitude tests (AH5 and UK Clinical Aptitude Test (UKCAT)). Outcomes included undergraduate basic medical science and finals assessments, as well as postgraduate measures of Membership of the Royal Colleges of Physicians of the United Kingdom (MRCP(UK)) performance and entry in the Specialist Register. Construct-level predictive validity was calculated with the method of Hunter, Schmidt and Le (2006), adapted to correct for right-censorship of examination results due to grade inflation. Results Meta-regression analyzed 57 separate predictor-outcome correlations (POCs) and construct-level predictive validities (CLPVs). Mean CLPVs are substantially higher (.450) than mean POCs (.171). Mean CLPVs for first-year examinations, were high for A-levels (.809; CI: .501 to .935), and lower for GCSEs/O-levels (.332; CI: .024 to .583) and UKCAT (mean = .245; CI: .207 to .276). A-levels had higher CLPVs for all undergraduate and postgraduate assessments than did GCSEs/O-levels and intellectual aptitude tests. CLPVs of educational attainment measures decline somewhat during training, but continue to predict postgraduate performance. Intellectual aptitude tests have lower CLPVs than A-levels or GCSEs

MHD generator performance analysis for the Advanced Power Train study

Science.gov (United States)

Pian, C. C. P.; Hals, F. A.

1984-01-01

Comparative analyses of different MHD power train designs for early commercial MHD power plants were performed for plant sizes of 200, 500, and 1000 MWe. The work was conducted as part of the first phase of a planned three-phase program to formulate an MHD Advanced Power Train development program. This paper presents the results of the MHD generator design and part-load analyses. All of the MHD generator designs were based on burning of coal with oxygen-enriched air preheated to 1200 F. Sensitivities of the MHD generator design performance to variations in power plant size, coal type, oxygen enrichment level, combustor heat loss, channel length, and Mach number were investigated. Basd on these sensitivity analyses, together with the overall plant performance and cost-of-electricity analyses, as well as reliability and maintenance considerations, a recommended MHD generator design was selected for each of the three power plants. The generators for the 200 MWe and 500 MWe power plant sizes are supersonic designs. A subsonic generator design was selected for the 1000 MWe plant. Off-design analyses of part-load operation of the supersonic channel selected for the 200 MWe power plant were also conductd. The results showed that a relatively high overall net plant efficiency can be maintained during part-laod operation with a supersonic generator design.

The Consistency of Performance Management System Based on Attributes of the Performance Indicator: An Empirical Study

Directory of Open Access Journals (Sweden)

Jan Zavadsky

2014-07-01

Full Text Available Purpose: The performance management system (PMS is a metasystem over all business processes at the strategic and operational level. Effectiveness of the various management systems depends on many factors. One of them is the consistent definition of each system elements. The main purpose of this study is to explore if the performance management systems of the sample companies is consistent and how companies can create such a system. The consistency in this case is based on the homogenous definition of attributes relating to the performance indicator as a basic element of PMS.Methodology: At the beginning, we used an affinity diagram that helped us to clarify and to group various attributes of performance indicators. The main research results we achieved are through empirical study. The empirical study was carried out in a sample of Slovak companies. The criterion for selection was the existence of the certified management systems according to the ISO 9001. Representativeness of the sample companies was confirmed by application of Pearson´s chi-squared test (χ2 - test due to above standards. Findings: Coming from the review of various literature, we defined four groups of attributes relating to the performance indicator: formal attributes, attributes of target value, informational attributes and attributes of evaluation. The whole set contains 21 attributes. The consistency of PMS is based not on maximum or minimum number of attributes, but on the same type of attributes for each performance indicator used in PMS at both the operational and strategic level. The main findings are: companies use various financial and non-financial indicators at strategic or operational level; companies determine various attributes of performance indicator, but most of the performance indicators are otherwise determined; we identified the common attributes for the whole sample of companies. Practical implications: The research results have got an implication for

EFFECT OF INTERNATIONAL FINANCIAL REPORTING STANDARD ON CORPORATE PERFORMANCE OF SELECTED BANKS LISTED ON NIGERIA STOCK EXCHANGE

Directory of Open Access Journals (Sweden)

J. N. ELOSIUBA

2018-03-01

Full Text Available In the light of globalisation where foreign investment has become trendy, comparability of financial reports of Nigerian firms and those of other firms across the world has become a concern. Nigerian firms has been mandated to adopt the International Financial Reporting Standard (IFRS is their financial reporting.  This study has examined the effect of the IFRS adoption on the reported performance of Nigerian banks listed on the Nigerian Stock Exchange. Eight (8 out of the fourteen (14 quoted banks were selected for the study. Four indices of performance employed in the study are profitability using the Return on Equity, Liquidity using total deposit to total loan, loan grants and then market value measured by Price earnings ratio for the period (2011 and 2012. 2011 represented GAAP era while 2012 stands for IFRS adoption. A comparability index for the banks were computed using the Excel Spreadsheet for each of the banks on each variable. Then the One Sample Test was employed for the analyses. The mean was used to answer the research question while the t-statistics tested the hypotheses. The results showed that mean values for profitability, liquidity and market value are greater in the GAAP era (2011 than in the IFRS period (2012, while loan grant has higher for IFRS period (2012. The t-tested indicated none of the variables had significant effect.  Thus the study concluded that IFRS adopted does not have significant effect on bank performance reported in 2011 and 2012. The use of IFRS for all firms as well as incorporation of IFRS guideline in professional training are recommended by this study.

Instance selection in digital soil mapping: a study case in Rio Grande do Sul, Brazil

Directory of Open Access Journals (Sweden)

Elvio Giasson

2015-09-01

Full Text Available A critical issue in digital soil mapping (DSM is the selection of data sampling method for model training. One emerging approach applies instance selection to reduce the size of the dataset by drawing only relevant samples in order to obtain a representative subset that is still large enough to preserve relevant information, but small enough to be easily handled by learning algorithms. Although there are suggestions to distribute data sampling as a function of the soil map unit (MU boundaries location, there are still contradictions among research recommendations for locating samples either closer or more distant from soil MU boundaries. A study was conducted to evaluate instance selection methods based on spatially-explicit data collection using location in relation to soil MU boundaries as the main criterion. Decision tree analysis was performed for modeling digital soil class mapping using two different sampling schemes: a selecting sampling points located outside buffers near soil MU boundaries, and b selecting sampling points located within buffers near soil MU boundaries. Data was prepared for generating classification trees to include only data points located within or outside buffers with widths of 60, 120, 240, 360, 480, and 600m near MU boundaries. Instance selection methods using both spatial selection of methods was effective for reduced size of the dataset used for calibrating classification tree models, but failed to provide advantages to digital soil mapping because of potential reduction in the accuracy of classification tree models.

A study on improving the performance of a research reactor's equilibrium core

Directory of Open Access Journals (Sweden)

Muhammad Atta

2013-01-01

Full Text Available Utilizing low enriched uranium silicide fuel (U3Si2-Al of existing uranium density (3.285 g/cm3, different core configurations have been studied in search of an equilibrium core with an improved performance for the Pakistan Research Reactor-1. Furthermore, we have extended our analysis to the performance of higher density silicide fuels with a uranium density of 4.0 and 4.8 U g/cm3. The criterion used in selecting the best performing core was that of “unit flux time cycle length per 235U mass per cycle”. In order to analyze core performance by improving neutron moderation, utilizing higher-density fuel, the effect of the coolant channel width was also studied by reducing the number of plates in the standard/control fuel element. Calculations employing computer codes WIMSD/4 and CITATION were performed. A ten energy group structure for fission neutrons was used for the generation of microscopic cross-sections through WIMSD/4. To search the equilibrium core, two-dimensional core modelling was performed in CITATION. Performance indicators have shown that the higher-density uranium silicide-fuelled core (U density 4.8 g/cm3 without any changes in standard/control fuel elements, comprising of 15 standard and 4 control fuel elements, is the best performing of all analyzed cores.

The relative age effect in the German Football TID Programme: biases in motor performance diagnostics and effects on single motor abilities and skills in groups of selected players.

Science.gov (United States)

Votteler, Andreas; Höner, Oliver

2014-01-01

This study examined the disturbing effects of relative age on the talent identification process in the talent development programme of the German Football Association. The bias in the selection rate was examined via the extent of relative age effects. The bias in motor performance diagnostics was analysed by comparing the motor performance of selected players with normal motor development. The mechanisms underlying the relative age biases in motor performance were examined by modelling the direct and indirect effects of relative age on single motor performance tests for sprint, running agility, dribbling and ball passing and control. Data from 10,130 selected football players from the U12 to U15 age groups were collected in autumn 2010. The birth distribution differed significantly from the reference population with approximately 61% of the players born in the first half of the year. The selection probability was approximately two times higher for players born in the first quarter of the year than for players born in the last quarter. Revised motor performance diagnostics showed better results on average for relatively younger players. Path analysis revealed significant direct and indirect relative age effects for physiologically demanding tests and almost no effects for technically demanding tests. Large sample sizes allowed high resolution in relative age with additional informational content and multivariate modelling of the complex relationships among relative age, physical development and motor performance. The results are discussed on how relative age affects the effectiveness and fairness of talent identification and development processes.

Effects of Training and Feedback on Accuracy of Predicting Rectosigmoid Neoplastic Lesions and Selection of Surveillance Intervals by Endoscopists Performing Optical Diagnosis of Diminutive Polyps.

Science.gov (United States)

Vleugels, Jasper L A; Dijkgraaf, Marcel G W; Hazewinkel, Yark; Wanders, Linda K; Fockens, Paul; Dekker, Evelien

2018-05-01

Real-time differentiation of diminutive polyps (1-5 mm) during endoscopy could replace histopathology analysis. According to guidelines, implementation of optical diagnosis into routine practice would require it to identify rectosigmoid neoplastic lesions with a negative predictive value (NPV) of more than 90%, using histologic findings as a reference, and agreement with histology-based surveillance intervals for more than 90% of cases. We performed a prospective study with 39 endoscopists accredited to perform colonoscopies on participants with positive results from fecal immunochemical tests in the Bowel Cancer Screening Program at 13 centers in the Netherlands. Endoscopists were trained in optical diagnosis using a validated module (Workgroup serrAted polypS and Polyposis). After meeting predefined performance thresholds in the training program, the endoscopists started a 1-year program (continuation phase) in which they performed narrow band imaging analyses during colonoscopies of participants in the screening program and predicted histological findings with confidence levels. The endoscopists were randomly assigned to groups that received feedback or no feedback on the accuracy of their predictions. Primary outcome measures were endoscopists' abilities to identify rectosigmoid neoplastic lesions (using histology as a reference) with NPVs of 90% or more, and selecting surveillance intervals that agreed with those determined by histology for at least 90% of cases. Of 39 endoscopists initially trained, 27 (69%) completed the training program. During the continuation phase, these 27 endoscopists performed 3144 colonoscopies in which 4504 diminutive polyps were removed. The endoscopists identified neoplastic lesions with a pooled NPV of 90.8% (95% confidence interval 88.6-92.6); their proposed surveillance intervals agreed with those determined by histologic analysis for 95.4% of cases (95% confidence interval 94.0-96.6). Findings did not differ between the group

Selection signature in domesticated animals.

Science.gov (United States)

Pan, Zhang-yuan; He, Xiao-yun; Wang, Xiang-yu; Guo, Xiao-fei; Cao, Xiao-han; Hu, Wen-ping; Di, Ran; Liu, Qiu-yue; Chu, Ming-xing

2016-12-20

Domesticated animals play an important role in the life of humanity. All these domesticated animals undergo same process, first domesticated from wild animals, then after long time natural and artificial selection, formed various breeds that adapted to the local environment and human needs. In this process, domestication, natural and artificial selection will leave the selection signal in the genome. The research on these selection signals can find functional genes directly, is one of the most important strategies in screening functional genes. The current studies of selection signal have been performed in pigs, chickens, cattle, sheep, goats, dogs and other domestic animals, and found a great deal of functional genes. This paper provided an overview of the types and the detected methods of selection signal, and outlined researches of selection signal in domestic animals, and discussed the key issues in selection signal analysis and its prospects.

Portfolio Manager Selection – A Case Study

DEFF Research Database (Denmark)

Christensen, Michael

2017-01-01

Within a delegated portfolio management setting, this paper presents a case study of how the manager selection process can be operationalized in practice. Investors have to pursue a thorough screening of potential portfolio managers in order to discover their quality, and this paper discusses how...

Performance of polydimethylsiloxane membrane contactor process for selective hydrogen sulfide removal from biogas.

Science.gov (United States)

Tilahun, Ebrahim; Bayrakdar, Alper; Sahinkaya, Erkan; Çalli, Bariş

2017-03-01

H 2 S in biogas affects the co-generation performance adversely by corroding some critical components within the engine and it has to be removed in order to improve the biogas quality. This work presents the use of polydimethylsiloxane (PDMS) membrane contactor for selective removal of H 2 S from the biogas. Experiments were carried out to evaluate the effects of different pH of absorption liquid, biogas flowrate and temperature on the absorption performances. The results revealed that at the lowest loading rate (91mg H 2 S/m 2 ·h) more than 98% H 2 S and 59% CO 2 absorption efficiencies were achieved. The CH 4 content in the treated gas increased from 60 to 80% with nearly 5% CH 4 loss. Increasing the pH (7-10) and loading rate (91-355mg H 2 S/m 2 ·h) enhanced the H 2 S absorption capacity, and the maximum H 2 S/CO 2 and H 2 S/CH 4 selectivity factors were 2.5 and 58, respectively. Temperature played a key role in the process and lower temperature was beneficial for intensifying H 2 S absorption performance. The highest H 2 S fluxes at pH 10 and 7 were 3.4g/m 2 ·d and 1.8g/m 2 ·d with overall mass transfer coefficients of 6.91×10 -6 and 4.99×10 -6 m/s, respectively. The results showed that moderately high H 2 S fluxes with low CH 4 loss may be achieved by using a robust and cost-effective membrane based absorption process for desulfurization of biogas. A tubular PDMS membrane contactor was tested for the first time to remove H 2 S from biogas under slightly alkaline conditions and the suggested process could be a promising for real scale applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

THE STUDY OF ORGANIZATIONAL BEHAVIOR ON FISHERY MANUFACTURE INDUSTRIES EMPLOYEES PERFORMANCES

Directory of Open Access Journals (Sweden)

Agung Wahyu Handaru

2015-06-01

Full Text Available The purpose of this study was to examine the employee performance of fish-based food processing industries in West Java, which driven by variables of organizational culture, job satisfaction and motivation. The fishing industry in Indonesia has resulted in huge foreign exchange. On the other hand, their products are still poor quality and do not meet export standard. This is likely due to low employee performance. The research object were employees of three fish-based food processing plants. The sample was selected by simple random sampling technique. This study revealed different results from previous studies, that only organizational culture has an effect on employee performance. While job satisfaction and motivation has no effect on performance. Tujuan penelitian ini adalah menguji kinerja karyawan industri pengolahan makanan berbasis ikan di wilayah Jawa Barat, yang dipengaruhi dari variabel budaya organisasi, kepuasan kerja dan motivasi. Industri perikanan di Indonesia telahmenghasilkan devisa negara besar. Disisi lain, hasil produknya masih banyak yang belum memenuhi standar ekspor dan bermutu rendah. Hal tersebut kemungkinan dikarenakan kinerja karyawan yang rendah. Objek penelitian ini adalah karyawan dari tiga pabrik pengolahan makanan berbasis ikan. Sampel dipilih dengan teknik simple random sampling. Penelitian ini mengungkapkan hasil yang berbeda dari penelitian sebelumnya. Dari ketiga variabel independen, hanya budaya organisasi yang berpengaruh pada kinerja karyawan. Sedangkan kepuasan kerja dan motivasi tidak berpengaruh.

Synthesis of molecular imprinted polymers for selective extraction of domperidone from human serum using high performance liquid chromatography with fluorescence detection.

Science.gov (United States)

Salehi, Simin; Rasoul-Amini, Sara; Adib, Noushin; Shekarchi, Maryam

2016-08-01

In this study a novel method is described for selective quantization of domperidone in biological matrices applying molecular imprinted polymers (MIPs) as a sample clean up procedure using high performance liquid chromatography coupled with a fluorescence detector. MIPs were synthesized with chloroform as the porogen, ethylene glycol dimethacrylate as the crosslinker, methacrylic acid as the monomer, and domperidone as the template molecule. The new imprinted polymer was used as a molecular sorbent for separation of domperidone from serum. Molecular recognition properties, binding capacity and selectivity of MIPs were determined. The results demonstrated exceptional affinity for domperidone in biological fluids. The domperidone analytical method using MIPs was verified according to validation parameters, such as selectivity, linearity (5-80ng/mL, r(2)=0.9977), precision and accuracy (10-40ng/mL, intra-day=1.7-5.1%, inter-day=4.5-5.9%, and accuracy 89.07-98.9%).The limit of detection (LOD) and quantization (LOQ) of domperidone was 0.0279 and 0.092ng/mL, respectively. The simplicity and suitable validation parameters makes this a highly valuable selective bioequivalence method for domperidone analysis in human serum. Copyright © 2016 Elsevier B.V. All rights reserved.

Sexual selection studies: A NESCent catalyst meeting

NARCIS (Netherlands)

Roughgarden, J.; Adkins-Regan, E.; Akcay, E.; Hinde, C.A.; Hoquet, T.; O'Connor, C.; Prokop, Z.M.; Prum, R.O.; Shafir, S.; Snow, S.S.; Taylor, D.; Cleve, Van J.; Weisberg, M.

2015-01-01

A catalyst meeting on sexual selection studies was held in July 2013 at the facilities of the National Evolutionary Synthesis Center (NESCent) in Durham, NC. This article by a subcommittee of the participants foregrounds some of the topics discussed at the meeting. Topics mentioned here include the

How do we select multiple features? Transient costs for selecting two colors rather than one, persistent costs for color-location conjunctions.

Science.gov (United States)

Lo, Shih-Yu; Holcombe, Alex O

2014-02-01

In a previous study Lo, Howard, & Holcombe (Vision Research 63:20-33, 2012), selecting two colors did not induce a performance cost, relative to selecting one color. For example, requiring possible report of both a green and a red target did not yield a worse performance than when both targets were green. Yet a cost of selecting multiple colors was observed when selection needed be contingent on both color and location. When selecting a red target to the left and a green target to the right, superimposing a green distractor to the left and a red distractor to the right impeded performance. Possibly, participants cannot confine attention to a color at a particular location. As a result, distractors that share the target colors disrupt attentional selection of the targets. The attempt to select the targets must then be repeated, which increases the likelihood that the trial terminates when selection is not effective, even for long trials. Consistent with this, here we find a persistent cost of selecting two colors when the conjunction of color and location is needed, but the cost is confined to short exposure durations when the observer just has to monitor red and green stimuli without the need to use the location information. These results suggest that selecting two colors is time-consuming but effective, whereas selection of simultaneous conjunctions is never entirely successful.

Differential Contributions of Selective Attention and Sensory Integration to Driving Performance in Healthy Aging and Alzheimer's Disease.

Science.gov (United States)

Venkatesan, Umesh M; Festa, Elena K; Ott, Brian R; Heindel, William C

2018-05-01

Patients with Alzheimer's disease (AD) demonstrate deficits in cross-cortical feature binding distinct from age-related changes in selective attention. This may have consequences for driving performance given its demands on multisensory integration. We examined the relationship of visuospatial search and binding to driving in patients with early AD and elderly controls (EC). Participants (42 AD; 37 EC) completed search tasks requiring either luminance-motion (L-M) or color-motion (C-M) binding, analogs of within and across visual processing stream binding, respectively. Standardized road test (RIRT) and naturalistic driving data (CDAS) were collected alongside clinical screening measures. Patients performed worse than controls on most cognitive and driving indices. Visual search and clinical measures were differentially related to driving behavior across groups. L-M search and Trail Making Test (TMT-B) were associated with RIRT performance in controls, while C-M binding, TMT-B errors, and Clock Drawing correlated with CDAS performance in patients. After controlling for demographic and clinical predictors, L-M reaction time significantly predicted RIRT performance in controls. In patients, C-M binding made significant contributions to CDAS above and beyond demographic and clinical predictors. RIRT and C-M binding measures accounted for 51% of variance in CDAS performance in patients. Whereas selective attention is associated with driving behavior in EC, cross-cortical binding appears most sensitive to driving in AD. This latter relationship may emerge only in naturalistic settings, which better reflect patients' driving behavior. Visual integration may offer distinct insights into driving behavior, and thus has important implications for assessing driving competency in early AD. (JINS, 2018, 24, 486-497).

Studies on Steam Absorption Chillers Performance at a Cogeneration Plant

Directory of Open Access Journals (Sweden)

Abd Majid Mohd Amin

2014-07-01

Full Text Available Absorption chillers at cogeneration plants generate chilled water using steam supplied by heat recovery steam generators. The chillers can be of either single-effect or double effect configuration and the coefficient of performance (COP depends on the selection made. The COP varies from 0.7 to 1.2 depending on the types of chillers. Single effect chillers normally have COP in the range of 0.68 to 0.79. Double effect chillers COP are higher and can reach 1.2. However due to factors such as inappropriate operations and maintenance practices, COP could drop over a period of time. In this work the performances of double effect steam absorption chillers at a cogeneration plant were studied. The study revealed that during the period of eleven years of operation the COP of the chillers deteriorated from 1.25 to 0.6. Regression models on the operation data indicated that the state of deterioration was projected to persist. Hence, it would be recommended that the chillers be considered for replacement since they had already undergone a series of costly repairs.

Antenna Selection for Full-Duplex MIMO Two-Way Communication Systems

KAUST Repository

Wilson-Nunn, Daniel; Chaaban, Anas; Sezgin, Aydin; Alouini, Mohamed-Slim

2017-01-01

Antenna selection for full-duplex communication between two nodes, each equipped with a predefined number of antennae and transmit/receive chains, is studied. Selection algorithms are proposed based on magnitude, orthogonality, and determinant criteria. The algorithms are compared to optimal selection obtained by exhaustive search as well as random selection, and are shown to yield performance fairly close to optimal at a much lower complexity. Performance comparison for a Rayleigh fading symmetric channel reveals that selecting a single transmit antenna is best at low signal-to-noise ratio (SNR), while selecting an equal number of transmit and receive antennae is best at high SNR.

Antenna Selection for Full-Duplex MIMO Two-Way Communication Systems

KAUST Repository

Wilson-Nunn, Daniel

2017-03-11

Antenna selection for full-duplex communication between two nodes, each equipped with a predefined number of antennae and transmit/receive chains, is studied. Selection algorithms are proposed based on magnitude, orthogonality, and determinant criteria. The algorithms are compared to optimal selection obtained by exhaustive search as well as random selection, and are shown to yield performance fairly close to optimal at a much lower complexity. Performance comparison for a Rayleigh fading symmetric channel reveals that selecting a single transmit antenna is best at low signal-to-noise ratio (SNR), while selecting an equal number of transmit and receive antennae is best at high SNR.

The art and science of selecting graduate students in the biomedical sciences: Performance in doctoral study of the foundational sciences.

Science.gov (United States)

Park, Hee-Young; Berkowitz, Oren; Symes, Karen; Dasgupta, Shoumita

2018-01-01

The goal of this study was to investigate associations between admissions criteria and performance in Ph.D. programs at Boston University School of Medicine. The initial phase of this project examined student performance in the classroom component of a newly established curriculum named "Foundations in Biomedical Sciences (FiBS)". Quantitative measures including undergraduate grade point average (GPA), graduate record examination (GRE; a standardized, computer-based test) scores for the verbal (assessment of test takers' ability to analyze, evaluate, and synthesize information and concepts provided in writing) and quantitative (assessment of test takers' problem-solving ability) components of the examination, previous research experience, and competitiveness of previous research institution were used in the study. These criteria were compared with competencies in the program defined as students who pass the curriculum as well as students categorized as High Performers. These data indicated that there is a significant positive correlation between FiBS performance and undergraduate GPA, GRE scores, and competitiveness of undergraduate institution. No significant correlations were found between FiBS performance and research background. By taking a data-driven approach to examine admissions and performance, we hope to refine our admissions criteria to facilitate an unbiased approach to recruitment of students in the life sciences and to share our strategy to support similar goals at other institutions.

International market selection and subsidiary performance : A neural network approach

NARCIS (Netherlands)

Brouthers, L.E.; Wilkinson, T.; Mukhopadhyay, S.; Brouthers, K.D.

2009-01-01

How should multinational enterprises (MNEs) select international markets? We develop a model of international market selection that adds firm-specific advantages and transaction cost considerations to previously explored target market factors based on Dunning's Eclectic Framework. Results obtained