Effect of time-varying humidity on the performance of a polymer electrolyte membrane fuel cells

Energy Technology Data Exchange (ETDEWEB)

Noorani, Shamsuddin [Department of Mechanical Engineering, University of Michigan-Dearborn (United States); Shamim, Tariq [Mechanical Engineering, Masdar Institute of Science and Technology (United Arab Emirates)], E-mail: tshamim@masdar.ac.ae

2011-07-01

In the energy sector, fuel cells constitute a promising solution for the future due to their energy-efficient and environment-friendly characteristics. However, the performance of fuel cells is very much affected by the humidification level of the reactants, particularly in hot regions. The aim of this paper is to develop a better understanding of the effect of driving conditions on the performance of fuel cells. A macroscopic single-fuel-cell-based, one dimensional, isothermal model was used on a polymer electrolyte membrane fuel cell to carry out a computational study of the impact of humidity conditions which vary over time. It was found that the variation of humidity has a significant effect on water distribution but a much lower impact on power and current densities. This paper provided useful information on fuel cells' performance under varying conditions which could be used to improve their design for mobile applications.

Time-varying BRDFs.

Science.gov (United States)

Sun, Bo; Sunkavalli, Kalyan; Ramamoorthi, Ravi; Belhumeur, Peter N; Nayar, Shree K

2007-01-01

The properties of virtually all real-world materials change with time, causing their bidirectional reflectance distribution functions (BRDFs) to be time varying. However, none of the existing BRDF models and databases take time variation into consideration; they represent the appearance of a material at a single time instance. In this paper, we address the acquisition, analysis, modeling, and rendering of a wide range of time-varying BRDFs (TVBRDFs). We have developed an acquisition system that is capable of sampling a material's BRDF at multiple time instances, with each time sample acquired within 36 sec. We have used this acquisition system to measure the BRDFs of a wide range of time-varying phenomena, which include the drying of various types of paints (watercolor, spray, and oil), the drying of wet rough surfaces (cement, plaster, and fabrics), the accumulation of dusts (household and joint compound) on surfaces, and the melting of materials (chocolate). Analytic BRDF functions are fit to these measurements and the model parameters' variations with time are analyzed. Each category exhibits interesting and sometimes nonintuitive parameter trends. These parameter trends are then used to develop analytic TVBRDF models. The analytic TVBRDF models enable us to apply effects such as paint drying and dust accumulation to arbitrary surfaces and novel materials.

Robotic Observatory System Design-Specification Considerations for Achieving Long-Term Sustainable Precision Performance

Science.gov (United States)

Wray, J. D.

2003-05-01

The robotic observatory telescope must point precisely on the target object, and then track autonomously to a fraction of the FWHM of the system PSF for durations of ten to twenty minutes or more. It must retain this precision while continuing to function at rates approaching thousands of observations per night for all its years of useful life. These stringent requirements raise new challenges unique to robotic telescope systems design. Critical design considerations are driven by the applicability of the above requirements to all systems of the robotic observatory, including telescope and instrument systems, telescope-dome enclosure systems, combined electrical and electronics systems, environmental (e.g. seeing) control systems and integrated computer control software systems. Traditional telescope design considerations include the effects of differential thermal strain, elastic flexure, plastic flexure and slack or backlash with respect to focal stability, optical alignment and angular pointing and tracking precision. Robotic observatory design must holistically encapsulate these traditional considerations within the overall objective of maximized long-term sustainable precision performance. This overall objective is accomplished through combining appropriate mechanical and dynamical system characteristics with a full-time real-time telescope mount model feedback computer control system. Important design considerations include: identifying and reducing quasi-zero-backlash; increasing size to increase precision; directly encoding axis shaft rotation; pointing and tracking operation via real-time feedback between precision mount model and axis mounted encoders; use of monolithic construction whenever appropriate for sustainable mechanical integrity; accelerating dome motion to eliminate repetitive shock; ducting internal telescope air to outside dome; and the principal design criteria: maximizing elastic repeatability while minimizing slack, plastic deformation

The performance of the backpropagation algorithm with varying slope of the activation function

International Nuclear Information System (INIS)

Bai Yanping; Zhang Haixia; Hao Yilong

2009-01-01

Some adaptations are proposed to the basic BP algorithm in order to provide an efficient method to non-linear data learning and prediction. In this paper, an adopted BP algorithm with varying slope of activation function and different learning rates is put forward. The results of experiment indicated that this algorithm can get very good performance of training. We also test the prediction performance of our adopted BP algorithm on 16 instances. We compared the test results to the ones of the BP algorithm with gradient descent momentum and an adaptive learning rate. The results indicate this adopted BP algorithm gives best performance (100%) for test example, which conclude this adopted BP algorithm produces a smoothed reconstruction that learns better to new prediction function values than the BP algorithm improved with momentum.

PERFORMANCE - AN EVOLVING CONCEPT

OpenAIRE

Assist. Mirela-Oana Pintea Ph.D Student; Lect. Monica-Violeta Achim

2010-01-01

The concept of performance is a problematic concept and will remain so as long as the definition of company performance varies depending on the interests of users of information. On this consideration, no consensus was reached regarding the definition, methodology and performance models used. Defining this concept is realized in accordance with its objectives of users of information, while the methodology and models used are influenced by legal regulations and management policies. The approac...

Consideration of heat transfer performance of helium-gas/water coolers in HENDEL

International Nuclear Information System (INIS)

Inagaki, Yoshiyuki; Miyamoto, Yoshiaki

1986-10-01

The helium engineering loop (HENDEL) has four helium-gas/water coolers, where the cooling water flows in the tubes and the helium gas flows on the shell side. Their cooling performance depends on mainly the heat transfer of helium gas on the shell side. This report describes the operational data of the coolers and the consideration of the heat transfer performance which is important for the design of coolers. It becomes clear that Donohue's equation is close to the operational data and conservative for the segmental baffle type cooler and preduction by Fishenden-Saunders or Zukauskas' equation is conservation for the step-up baffle type cooler. (author)

[Theological moral considerations of advance directives].

Science.gov (United States)

Virt, G

1997-01-01

The forms for advanced directives vary considerably in respect to content and wording. This article intends to develop ethical criteria for such texts, from the moraltheological point of view, also considering the social context.

Basic considerations for the preparation of performance testing materials as related to performance evaluation acceptance criteria

International Nuclear Information System (INIS)

McCurdy, D.E.; Morton, J.S.

2001-01-01

The preparation of performance testing (PT) materials for environmental and radiobioassay applications involves the use of natural matrix materials containing the analyte of interest, the addition (spiking) of the analyte to a desired matrix (followed by blending for certain matrices) or a combination of the two. The distribution of the sample analyte concentration in a batch of PT samples will reflect the degree of heterogeneity of the analyte in the PT material and/or the reproducibility of the sample preparation process. Commercial and government implemented radioanalytical performance evaluation programs have a variety of acceptable performance criteria. The performance criteria should take into consideration many parameters related to the preparation of the PT materials including the within and between sample analyte heterogeneity, the accuracy of the quantification of an analyte in the PT material and to what 'known' value will a laboratory's result be compared. How sample preparation parameters affect the successful participation in performance evaluation (PE) programs having an acceptance criteria established as a percent difference from a 'known' value or in PE programs using other acceptance criteria, such as the guidance provided in ANSI N42.22 and N13.30 is discussed. (author)

Time-varying value of electric energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Mims, Natalie A.; Eckman, Tom; Goldman, Charles

2017-06-30

Electric energy efficiency resources save energy and may reduce peak demand. Historically, quantification of energy efficiency benefits has largely focused on the economic value of energy savings during the first year and lifetime of the installed measures. Due in part to the lack of publicly available research on end-use load shapes (i.e., the hourly or seasonal timing of electricity savings) and energy savings shapes, consideration of the impact of energy efficiency on peak demand reduction (i.e., capacity savings) has been more limited. End-use load research and the hourly valuation of efficiency savings are used for a variety of electricity planning functions, including load forecasting, demand-side management and evaluation, capacity and demand response planning, long-term resource planning, renewable energy integration, assessing potential grid modernization investments, establishing rates and pricing, and customer service. This study reviews existing literature on the time-varying value of energy efficiency savings, provides examples in four geographically diverse locations of how consideration of the time-varying value of efficiency savings impacts the calculation of power system benefits, and identifies future research needs to enhance the consideration of the time-varying value of energy efficiency in cost-effectiveness screening analysis. Findings from this study include: -The time-varying value of individual energy efficiency measures varies across the locations studied because of the physical and operational characteristics of the individual utility system (e.g., summer or winter peaking, load factor, reserve margin) as well as the time periods during which savings from measures occur. -Across the four locations studied, some of the largest capacity benefits from energy efficiency are derived from the deferral of transmission and distribution system infrastructure upgrades. However, the deferred cost of such upgrades also exhibited the greatest range

Effects of varying the longitudinal dispersion and no drip cask rate failures upon Yucca Mountain site performance

International Nuclear Information System (INIS)

Winterle, Bret

2001-01-01

Proposed changes in the regulatory time limits used for viability assessments of the proposed national high-level radioactive waste repository in Yucca Mountain, Nevada from 10,000 years to 100,000 or even 1,000,000 years call into question both the modelling techniques used to represent the repository's long-term performance, and our ability to extrapolate technological, climatological and geological phenomenon. Using a high-powered risk-assessment software program called Goldsim that a simplified total system performance assessment (STSPA) was designed for, the effects of varying the performance parameters of two barrier systems, one natural and one man-made, upon the total system performance were observed. The conclusion reached by varying these two parameters is that for a regulatory guideline of 10,000 years, there is no noticeable effect on the total system performance, but at 300,000 years, it appears that the effect of reducing the longitudinal dispersion rate (a natural barrier) by one order of magnitude produced an astronomically high receptor dose, indicating that as predicted, our abilities to model situations beyond our ability to accurately extrapolate current scientific research is futile. (author)

Effects of varying the longitudinal dispersion and no drip cask rate failures upon Yucca Mountain site performance

Energy Technology Data Exchange (ETDEWEB)

Winterle, Bret

2001-07-01

Proposed changes in the regulatory time limits used for viability assessments of the proposed national high-level radioactive waste repository in Yucca Mountain, Nevada from 10,000 years to 100,000 or even 1,000,000 years call into question both the modelling techniques used to represent the repository's long-term performance, and our ability to extrapolate technological, climatological and geological phenomenon. Using a high-powered risk-assessment software program called Goldsim that a simplified total system performance assessment (STSPA) was designed for, the effects of varying the performance parameters of two barrier systems, one natural and one man-made, upon the total system performance were observed. The conclusion reached by varying these two parameters is that for a regulatory guideline of 10,000 years, there is no noticeable effect on the total system performance, but at 300,000 years, it appears that the effect of reducing the longitudinal dispersion rate (a natural barrier) by one order of magnitude produced an astronomically high receptor dose, indicating that as predicted, our abilities to model situations beyond our ability to accurately extrapolate current scientific research is futile. (author)

Anistropically varying conductivity in irreversible electroporation simulations.

Science.gov (United States)

Labarbera, Nicholas; Drapaca, Corina

2017-11-01

One recent area of cancer research is irreversible electroporation (IRE). Irreversible electroporation is a minimally invasive procedure where needle electrodes are inserted into the body to ablate tumor cells with electricity. The aim of this paper is to propose a mathematical model that incorporates a tissue's conductivity increasing more in the direction of the electrical field as this has been shown to occur in experiments. It was necessary to mathematically derive a valid form of the conductivity tensor such that it is dependent on the electrical field direction and can be easily implemented into numerical software. The derivation of a conductivity tensor that can take arbitrary functions for the conductivity in the directions tangent and normal to the electrical field is the main contribution of this paper. Numerical simulations were performed for isotropic-varying and anisotropic-varying conductivities to evaluate the importance of including the electrical field's direction in the formulation for conductivity. By starting from previously published experimental results, this paper derived a general formulation for an anistropic-varying tensor for implementation into irreversible electroporation modeling software. The anistropic-varying tensor formulation allows the conductivity to take into consideration both electrical field direction and magnitude, as opposed to previous published works that only took into account electrical field magnitude. The anisotropic formulation predicts roughly a five percent decrease in ablation size for the monopolar simulation and approximately a ten percent decrease in ablation size for the bipolar simulations. This is a positive result as previously reported results found the isotropic formulation to overpredict ablation size for both monopolar and bipolar simulations. Furthermore, it was also reported that the isotropic formulation overpredicts the ablation size more for the bipolar case than the monopolar case. Thus, our

Modeling and Performance Considerations for Automated Fault Isolation in Complex Systems

Science.gov (United States)

Ferrell, Bob; Oostdyk, Rebecca

2010-01-01

The purpose of this paper is to document the modeling considerations and performance metrics that were examined in the development of a large-scale Fault Detection, Isolation and Recovery (FDIR) system. The FDIR system is envisioned to perform health management functions for both a launch vehicle and the ground systems that support the vehicle during checkout and launch countdown by using suite of complimentary software tools that alert operators to anomalies and failures in real-time. The FDIR team members developed a set of operational requirements for the models that would be used for fault isolation and worked closely with the vendor of the software tools selected for fault isolation to ensure that the software was able to meet the requirements. Once the requirements were established, example models of sufficient complexity were used to test the performance of the software. The results of the performance testing demonstrated the need for enhancements to the software in order to meet the demands of the full-scale ground and vehicle FDIR system. The paper highlights the importance of the development of operational requirements and preliminary performance testing as a strategy for identifying deficiencies in highly scalable systems and rectifying those deficiencies before they imperil the success of the project

Consideration and recommendation on the performance qualification of ISI in China

International Nuclear Information System (INIS)

Wang Ruiping

2004-01-01

Though operation of domestic commercial nuclear power units has been ten years more, the reliability of in-service inspection (ISI), as an important means for operation safety, is a severe doubt problem. While rich experience has been gained from more than thirty year researches and investigations on the certification of performance of ISI, and those benefit back in foreign countries, the area in China is still a new. The operation safety issue pushes the considerations and actions. In the article the history of activities in the world, and some personal ideas and recommendations are presented. (author)

Consideration of environmental change in performance assessments

International Nuclear Information System (INIS)

Pinedo, P.; Thorne, M.; Egan, M.; Calvez, M.; Kautsky, U.

2005-01-01

Depending on the particular circumstances in which a post-closure performance assessment of a radioactive waste repository is made, it may be appropriate to follow simple or more complex approaches in characterising the biosphere. Several different Example Reference Biospheres were explored in BIOMASS Theme 1 to address a range of issues that arise. Here, consideration is given to Example Reference Biospheres relevant to representing the implications of changes that may occur within the biosphere system during the period over which releases of radionuclides from a disposal facility might take place. Mechanisms of change considered include those extrinsic and intrinsic to the system of interest. An overall methodology for incorporating environmental change into assessments is proposed. This includes screening of primary mechanisms of change; identification of possible time sequences of change; development of a coherent description of the regional landscape response for each time sequence; integration of source term and geosphere-biosphere interface information; identification and description of one or more time series of assessment biospheres; and evaluation of the advantages and disadvantages of simulating the effects of sequences of biosphere systems and the transitions between them, or of defining a set of biosphere systems to be represented individually in a non-sequential analysis. The usefulness of the methodology is explored in two site-specific examples and one generic example

Performance exploration of an energy harvester near the varying magnetic field of an operating induction motor

International Nuclear Information System (INIS)

Uzun, Yunus; Kurt, Erol

2013-01-01

Highlights: • This paper explores the piezoelectric harvester performance. • The varying magnetic field generates electricity via exciting harvester. • Generated power should be optimized via load resistance. • 0.11 mW/cm 3 Power can be generated from 500 cm 3 surrounding volume. - Abstract: This paper reports a performance exploration of a piezoelectric harvester which is positioned near an operating induction motor. The harvester includes a magnet knob in a pendulum arrangement, which ascertains mechanical vibrations under the varying magnetic field. This energy harvester transforms the ambient unused magnetic energy into the electricity due to the piezoelectric layer attached to the pendulum. It has been proven that when the motor is under operation, the varying ambient field causes a varying magnetic force at the tip of harvester, then output voltage between the terminals of piezoelectric layer is produced due to the mechanical vibrations. This output signal has some characteristics of the operating induction motor in terms of its operation frequency, number of magnetic pole and natural frequency of the harvester. Since the surrounding field of the induction motor directly depends on the current flowing through the windings and electrical parameters, both the amplitude U and the frequency ω m of the harvested voltage can be characterized after some certain parametrical explorations. It has been proven that the harvested voltage strictly depends on the electrical load, which is attached to the terminals of the harvester, after the rectifying circuit. The harvested power per surrounding volume can be increased up to 0.11 mW/cm 3 , if the entire surrounding volume of the motor is considered

Stability over Time of Different Methods of Estimating School Performance

Science.gov (United States)

Dumay, Xavier; Coe, Rob; Anumendem, Dickson Nkafu

2014-01-01

This paper aims to investigate how stability varies with the approach used in estimating school performance in a large sample of English primary schools. The results show that (a) raw performance is considerably more stable than adjusted performance, which in turn is slightly more stable than growth model estimates; (b) schools' performance…

Visual search performance is predicted by both prestimulus and poststimulus electrical brain activity

NARCIS (Netherlands)

van den Berg, Berry; Appelbaum, Lawrence G.; Clark, Kait; Lorist, Monicque M.; Woldorff, Marty G.

2016-01-01

An individual's performance on cognitive and perceptual tasks varies considerably across time and circumstances. We investigated neural mechanisms underlying such performance variability using regression-based analyses to examine trial-by-trial relationships between response times (RTs) and

Spall Strength Measurements of Concrete for Varying Aggregate Sizes

International Nuclear Information System (INIS)

Chhabildas, Lalit C.; Kipp, Marlin E.; Reinhart, William D.; Wilson, Leonard T.

1999-01-01

Controlled impact experiments have been performed to determine the spall strength of four different concrete compositions. The four concrete compositions are identified as, 'SAC-5, CSPC', (''3/4'') large, and (''3/8'') small, Aggregate. They differ primarily in aggregate size but with average densities varying by less than five percent. Wave profiles from sixteen experiments, with shock amplitudes of 0.07 to 0.55 GPa, concentrate primarily within the elastic regime. Free-surface particle velocity measurements indicate consistent pullback signals in the release profiles, denoting average span strength of approximately 40 MPa. It is the purpose of this paper to present spall measurements under uniaxial strain loading. Notwithstanding considerable wave structure that is a unique characteristic to the heterogeneous nature of the scaled concrete, the spall amplitudes appear reproducible and consistent over the pressure range reported in this study

Human Performance Considerations for Remotely Piloted Aircraft Systems (RPAS)

Science.gov (United States)

Shively, R. Jay; Hobbs, Alan; Lyall, Beth; Rorie, Conrad

2015-01-01

Successful integration of Remotely Piloted Aircraft Systems (RPAS) into civil airspace will not only require solutions to technical challenges, but will also require that the design and operation of RPAS take into account human limitations and capabilities. Human factors can affect overall system performance whenever the system relies on people to interact with another element of the system. Four types of broad interactions can be described. These are (1) interactions between people and hardware, such as controls and displays; (2) human use of procedures and documentation; (3) impact of the task environment, including lighting, noise and monotony; and lastly, (4) interactions between operational personnel, including communication and coordination. In addition to the human factors that have been identified for conventional aviation, RPAS operations introduce a set of unique human challenges. The purpose of document is to raise human factors issues for consideration by workgroups of the ICAO RPAS panel as they work to develop guidance material and additions to ICAO annexes. It is anticipated that the content of this document will be revised and updated as the work of the panel progresses.

Navigation performance in virtual environments varies with fractal dimension of landscape.

Science.gov (United States)

Juliani, Arthur W; Bies, Alexander J; Boydston, Cooper R; Taylor, Richard P; Sereno, Margaret E

2016-09-01

Fractal geometry has been used to describe natural and built environments, but has yet to be studied in navigational research. In order to establish a relationship between the fractal dimension (D) of a natural environment and humans' ability to navigate such spaces, we conducted two experiments using virtual environments that simulate the fractal properties of nature. In Experiment 1, participants completed a goal-driven search task either with or without a map in landscapes that varied in D. In Experiment 2, participants completed a map-reading and location-judgment task in separate sets of fractal landscapes. In both experiments, task performance was highest at the low-to-mid range of D, which was previously reported as most preferred and discriminable in studies of fractal aesthetics and discrimination, respectively, supporting a theory of visual fluency. The applicability of these findings to architecture, urban planning, and the general design of constructed spaces is discussed.

Moral, Ethical and Legal Considerations with the Use of Drugs for Performance Maintenance in the Canadian Forces

Science.gov (United States)

2009-10-01

drugs . Most controlled drugs with performance maintenance characteristics would fall under schedule 3 of the Act. CF members’ consumption of performance...21 - 4 RTO-MP-HFM-181 Disorder (ADHD) to increase attention. Caffeine itself is the world’s most widely used psychoactive drug and by far the...RTO-MP-HFM-181 21 - 1 Moral, Ethical and Legal Considerations with the Use of Drugs for Performance Maintenance in the Canadian Forces

A Time-Varied Probabilistic ON/OFF Switching Algorithm for Cellular Networks

KAUST Repository

Rached, Nadhir B.; Ghazzai, Hakim; Kadri, Abdullah; Alouini, Mohamed-Slim

2018-01-01

In this letter, we develop a time-varied probabilistic on/off switching planning method for cellular networks to reduce their energy consumption. It consists in a risk-aware optimization approach that takes into consideration the randomness of the user profile associated with each base station (BS). The proposed approach jointly determines (i) the instants of time at which the current active BS configuration must be updated due to an increase or decrease of the network traffic load, and (ii) the set of minimum BSs to be activated to serve the networks’ subscribers. Probabilistic metrics modeling the traffic profile variation are developed to trigger this dynamic on/off switching operation. Selected simulation results are then performed to validate the proposed algorithm for different system parameters.

A Time-Varied Probabilistic ON/OFF Switching Algorithm for Cellular Networks

KAUST Repository

Rached, Nadhir B.

2018-01-11

In this letter, we develop a time-varied probabilistic on/off switching planning method for cellular networks to reduce their energy consumption. It consists in a risk-aware optimization approach that takes into consideration the randomness of the user profile associated with each base station (BS). The proposed approach jointly determines (i) the instants of time at which the current active BS configuration must be updated due to an increase or decrease of the network traffic load, and (ii) the set of minimum BSs to be activated to serve the networks’ subscribers. Probabilistic metrics modeling the traffic profile variation are developed to trigger this dynamic on/off switching operation. Selected simulation results are then performed to validate the proposed algorithm for different system parameters.

System design considerations for fast-neutron interrogation systems

International Nuclear Information System (INIS)

Micklich, B.J.; Curry, B.P.; Fink, C.L.; Smith, D.L.; Yule, T.J.

1993-01-01

Nonintrusive interrogation techniques that employ fast neutrons are of interest because of their sensitivity to light elements such as carbon, nitrogen, and oxygen. The primary requirement of a fast-neutron inspection system is to determine the value of atomic densities, or their ratios, over a volumetric grid superimposed on the object being interrogated. There are a wide variety of fast-neutron techniques that can provide this information. The differences between the various nuclear systems can be considered in light of the trade-offs relative to the performance requirements for each system's components. Given a set of performance criteria, the operational requirements of the proposed nuclear systems may also differ. For instance, resolution standards will drive scanning times and tomographic requirements, both of which vary for the different approaches. We are modelling a number of the fast-neutron interrogation techniques currently under consideration, to include Fast Neutron Transmission Spectroscopy (FNTS), Pulsed Fast Neutron Analysis (PFNA), and its variant, 14-MeV Associated Particle Imaging (API). The goals of this effort are to determine the component requirements for each technique, identify trade-offs that system performance standards impose upon those component requirements, and assess the relative advantages and disadvantages of the different approaches. In determining the component requirements, we will consider how they are driven by system performance standards, such as image resolution, scanning time, and statistical uncertainty. In considering the trade-offs between system components, we concentrate primarily on those which are common to all approaches, for example: source characteristics versus detector array requirements. We will then use the analysis to propose some figures-of-merit that enable performance comparisons between the various fast-neutron systems under consideration. The status of this ongoing effort is presented

Global Stability of Polytopic Linear Time-Varying Dynamic Systems under Time-Varying Point Delays and Impulsive Controls

Directory of Open Access Journals (Sweden)

M. de la Sen

2010-01-01

Full Text Available This paper investigates the stability properties of a class of dynamic linear systems possessing several linear time-invariant parameterizations (or configurations which conform a linear time-varying polytopic dynamic system with a finite number of time-varying time-differentiable point delays. The parameterizations may be timevarying and with bounded discontinuities and they can be subject to mixed regular plus impulsive controls within a sequence of time instants of zero measure. The polytopic parameterization for the dynamics associated with each delay is specific, so that (q+1 polytopic parameterizations are considered for a system with q delays being also subject to delay-free dynamics. The considered general dynamic system includes, as particular cases, a wide class of switched linear systems whose individual parameterizations are timeinvariant which are governed by a switching rule. However, the dynamic system under consideration is viewed as much more general since it is time-varying with timevarying delays and the bounded discontinuous changes of active parameterizations are generated by impulsive controls in the dynamics and, at the same time, there is not a prescribed set of candidate potential parameterizations.

Attitudes as Object-Evaluation Associations of Varying Strength

OpenAIRE

Fazio, Russell H.

2007-01-01

Historical developments regarding the attitude concept are reviewed, and set the stage for consideration of a theoretical perspective that views attitude, not as a hypothetical construct, but as evaluative knowledge. A model of attitudes as object-evaluation associations of varying strength is summarized, along with research supporting the model’s contention that at least some attitudes are represented in memory and activated automatically upon the individual’s encountering the attitude objec...

Risk adjusted receding horizon control of constrained linear parameter varying systems

NARCIS (Netherlands)

Sznaier, M.; Lagoa, C.; Stoorvogel, Antonie Arij; Li, X.

2005-01-01

In the past few years, control of Linear Parameter Varying Systems (LPV) has been the object of considerable attention, as a way of formalizing the intuitively appealing idea of gain scheduling control for nonlinear systems. However, currently available LPV techniques are both computationally

Acoustic transmitter and receiver performance in freshwater and estuarine environments

Science.gov (United States)

We report on the performance of passive acoustic receivers intended to detect the passage of 281 acoustically tagged migratory salmonids in two Oregon coastal watersheds. We found that ambient acoustic noise can vary considerably with location, and that “sync” pulses thought to ...

Flexible time-varying filter banks

Science.gov (United States)

Tuncer, Temel E.; Nguyen, Truong Q.

1993-09-01

Linear phase maximally flat FIR Butterworth filter approximations are discussed and a new filter design method is introduced. This variable cutoff filter design method uses the cosine modulated versions of a prototype filter. The design procedure is simple and different variants of this procedure can be used to obtain close to optimum linear phase filters. Using this method, flexible time-varying filter banks with good reconstruction error are introduced. These types of oversampled filter banks have small magnitude error which can be easily controlled by the appropriate choice of modulation frequency. This error can be further decreased by magnitude equalization without increasing the computational complexity considerably. Two dimensional design examples are also given.

Part 8. Deployment considerations

International Nuclear Information System (INIS)

Dance, K.D.; Chang, Y.I.; Daly, T.A.

1980-01-01

This report addresses considerations of fast breeder reactor development and deployment from a national perspective. Nations vary greatly in their expertise and interest relative to nuclear power, and hence a single set of steps to be taken by a nation in decision-making on breeder development and deployment cannot be presented. The approach taken in this report is to present discussions on key factors influencing the breeder development and deployment decisions, especially in non-breeder nations, by drawing upon historical perspectives of the Light Water Reactor for comparison

Finite-Time Reentry Attitude Control Using Time-Varying Sliding Mode and Disturbance Observer

Directory of Open Access Journals (Sweden)

Xuzhong Wu

2015-01-01

Full Text Available This paper presents the finite-time attitude control problem for reentry vehicle with redundant actuators in consideration of planet uncertainties and external disturbances. Firstly, feedback linearization technique is used to cancel the nonlinearities of equations of motion to construct a basic mode for attitude controller. Secondly, two kinds of time-varying sliding mode control methods with disturbance observer are integrated with the basic mode in order to enhance the control performance and system robustness. One method is designed based on boundary layer technique and the other is a novel second-order sliding model control method. The finite-time stability analyses of both resultant closed-loop systems are carried out. Furthermore, after attitude controller produces the torque commands, an optimization control allocation approach is introduced to allocate them into aerodynamic surface deflections and on-off reaction control system thrusts. Finally, the numerical simulation results demonstrate that both of the time-varying sliding mode control methods are robust to uncertainties and disturbances without chattering phenomenon. Moreover, the proposed second-order sliding mode control method possesses better control accuracy.

Robust LS-SVM-based adaptive constrained control for a class of uncertain nonlinear systems with time-varying predefined performance

Science.gov (United States)

Luo, Jianjun; Wei, Caisheng; Dai, Honghua; Yuan, Jianping

2018-03-01

This paper focuses on robust adaptive control for a class of uncertain nonlinear systems subject to input saturation and external disturbance with guaranteed predefined tracking performance. To reduce the limitations of classical predefined performance control method in the presence of unknown initial tracking errors, a novel predefined performance function with time-varying design parameters is first proposed. Then, aiming at reducing the complexity of nonlinear approximations, only two least-square-support-vector-machine-based (LS-SVM-based) approximators with two design parameters are required through norm form transformation of the original system. Further, a novel LS-SVM-based adaptive constrained control scheme is developed under the time-vary predefined performance using backstepping technique. Wherein, to avoid the tedious analysis and repeated differentiations of virtual control laws in the backstepping technique, a simple and robust finite-time-convergent differentiator is devised to only extract its first-order derivative at each step in the presence of external disturbance. In this sense, the inherent demerit of backstepping technique-;explosion of terms; brought by the recursive virtual controller design is conquered. Moreover, an auxiliary system is designed to compensate the control saturation. Finally, three groups of numerical simulations are employed to validate the effectiveness of the newly developed differentiator and the proposed adaptive constrained control scheme.

Design consideration on severe accident for future LWR

International Nuclear Information System (INIS)

Omoto, A.

1998-01-01

Utilities' Severe Accident Management strategies, selected based on Individual Plant Examination, are in the process of implementation for each operating plant. Activities for the next generation LWR design are going on by Utilities, NSSS vendors and Research Institutes. The proposed new designs vary from evolutionary design to revolutionary design such as the supercritical LWR. Discussion on the consideration of Severe Accident in the design of next generation LWR is being held to establish the industry's self-regulatory document on containment design and its performance, which ABWR-IER (Improved Evolutionary Reactor) on the part of BWR and Evolutionary APWR and New PWR21 on the part of PWR are expected to comply. Conceptual design study for ABWR-IER will illustrate an example of design approach for the prevention and mitigation of Severe Accident and its impact on capital cost

Effects of Varying Gravity Levels on fNIRS Headgear Performance and Signal Recovery

Science.gov (United States)

Mackey, Jeffrey R.; Harrivel, Angela R.; Adamovsky, Grigory; Lewandowski, Beth E.; Gotti, Daniel J.; Tin, Padetha; Floyd, Bertram M.

2013-01-01

This paper reviews the effects of varying gravitational levels on functional Near-Infrared Spectroscopy (fNIRS) headgear. The fNIRS systems quantify neural activations in the cortex by measuring hemoglobin concentration changes via optical intensity. Such activation measurement allows for the detection of cognitive state, which can be important for emotional stability, human performance and vigilance optimization, and the detection of hazardous operator state. The technique depends on coupling between the fNIRS probe and users skin. Such coupling may be highly susceptible to motion if probe-containing headgear designs are not adequately tested. The lack of reliable and self-applicable headgear robust to the influence of motion artifact currently inhibits its operational use in aerospace environments. Both NASAs Aviation Safety and Human Research Programs are interested in this technology as a method of monitoring cognitive state of pilots and crew.

VariVis: a visualisation toolkit for variation databases

Directory of Open Access Journals (Sweden)

Smith Timothy D

2008-04-01

Full Text Available Abstract Background With the completion of the Human Genome Project and recent advancements in mutation detection technologies, the volume of data available on genetic variations has risen considerably. These data are stored in online variation databases and provide important clues to the cause of diseases and potential side effects or resistance to drugs. However, the data presentation techniques employed by most of these databases make them difficult to use and understand. Results Here we present a visualisation toolkit that can be employed by online variation databases to generate graphical models of gene sequence with corresponding variations and their consequences. The VariVis software package can run on any web server capable of executing Perl CGI scripts and can interface with numerous Database Management Systems and "flat-file" data files. VariVis produces two easily understandable graphical depictions of any gene sequence and matches these with variant data. While developed with the goal of improving the utility of human variation databases, the VariVis package can be used in any variation database to enhance utilisation of, and access to, critical information.

Combined risk assessment of nonstationary monthly water quality based on Markov chain and time-varying copula.

Science.gov (United States)

Shi, Wei; Xia, Jun

2017-02-01

Water quality risk management is a global hot research linkage with the sustainable water resource development. Ammonium nitrogen (NH 3 -N) and permanganate index (COD Mn ) as the focus indicators in Huai River Basin, are selected to reveal their joint transition laws based on Markov theory. The time-varying moments model with either time or land cover index as explanatory variables is applied to build the time-varying marginal distributions of water quality time series. Time-varying copula model, which takes the non-stationarity in the marginal distribution and/or the time variation in dependence structure between water quality series into consideration, is constructed to describe a bivariate frequency analysis for NH 3 -N and COD Mn series at the same monitoring gauge. The larger first-order Markov joint transition probability indicates water quality state Class V w , Class IV and Class III will occur easily in the water body of Bengbu Sluice. Both marginal distribution and copula models are nonstationary, and the explanatory variable time yields better performance than land cover index in describing the non-stationarities in the marginal distributions. In modelling the dependence structure changes, time-varying copula has a better fitting performance than the copula with the constant or the time-trend dependence parameter. The largest synchronous encounter risk probability of NH 3 -N and COD Mn simultaneously reaching Class V is 50.61%, while the asynchronous encounter risk probability is largest when NH 3 -N and COD Mn is inferior to class V and class IV water quality standards, respectively.

Specific Consideration on Superior Performance and Evaluation Methods of Polymer-housed Surge Arresters

Science.gov (United States)

Ishizaki, Yoshihiro; Kobayashi, Misao; Suzuki, Hironori; Futagami, Koichi

It is very suitable to select the polymer materials for the housings of surge arresters (SAs), because the polymer materials are generally soft and light weight. Therefore, many kinds of polymer-housed SAs using various polymer materials have been developed, and expanding into many countries. Considering these backgrounds, the JEC technical report (JEC-TR) 23002-2008; polymer-housed surge arrester(1) has been established based on the existent relevant standards of arresters, such as JEC-2371-2003; Insulator-housed surge arresters(2) and IEC 60099-4 Edition 2.2, Metal-oxide surge arresters (MOSAs) without gaps for a.c. systems(3) in order to introduce the technology and provide a common guide for testing of polymer-housed SAs. According as the JEC-TR, the various new applications of the polymer-housed SAs, which are caused by superior advantages such as compact, light weight, safe failure mode, anti-seismic performance, anti-pollution performance and cost efficiency design, have been realized recently in Japan. Therefore, this paper gives specific consideration on the superior performance of the polymer-housed SAs and the evaluation methods of the polymer-housed SAs, because there are some issues in the existent standards to be solved.

Design Considerations | Efficient Windows Collaborative

Science.gov (United States)

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Circular economy practices among Chinese manufacturers varying in environmental-oriented supply chain cooperation and the performance implications.

Science.gov (United States)

Zhu, Qinghua; Geng, Yong; Lai, Kee-hung

2010-06-01

The rapidly growing industrial activities in emerging economies such as China have been causing resource depletion and pollution problems. This reality requires China to adopt an integrated management approach to resolve the conflict between industrial development and environmental protection, and the concept of circular economy (CE) serves this purpose. In this paper, we examine if different types of manufacturing enterprises on environmental-oriented supply chain cooperation (ESCC) exist. We also determine if the Chinese manufacturer types varying in ESCC differ in their implementation of the CE practices towards achieving the CE-targeted goals on improving both environmental and economic performance. Our cluster analytic results with multivariate analysis of variance (MANOVA) among the four identified types of Chinese manufacturers varying in environmental-oriented supply chain cooperation highlight the importance to intensify the cooperation with upstream and downstream supply chain partners for a CE initiative to succeed. (c) 2010 Elsevier Ltd. All rights reserved.

A Novel Switching-Based Control Framework for Improved Task Performance in Teleoperation System With Asymmetric Time-Varying Delays.

Science.gov (United States)

Zhai, Di-Hua; Xia, Yuanqing

2018-02-01

This paper addresses the adaptive control for task-space teleoperation systems with constrained predefined synchronization error, where a novel switched control framework is investigated. Based on multiple Lyapunov-Krasovskii functionals method, the stability of the resulting closed-loop system is established in the sense of state-independent input-to-output stability. Compared with previous work, the developed method can simultaneously handle the unknown kinematics/dynamics, asymmetric varying time delays, and prescribed performance control in a unified framework. It is shown that the developed controller can guarantee the prescribed transient-state and steady-state synchronization performances between the master and slave robots, which is demonstrated by the simulation study.

EMI Shielding Performance For Varies Frequency by Metal Plating on Mold Compound

Directory of Open Access Journals (Sweden)

Min Fee Tai

2017-07-01

Full Text Available Conformal metalization on mold compound offers new possibility for IC package design to improve features such as rigidization of the flexible core, heat sink capability, 3D-circuit patterning and the electromagnetic interference (EMI shielding. With the unique processes, the fabrication technology had enabled to achieve the high reliable performance and had passed the electrical test. Following research after the reliability concern, this paper further study the shielding effectiveness of varying coating thickness with respect to laboratory simulated EMI condition, using radio frequency from 10MHz to 5.8 GHz. Different metal namely pure nickel, nickel-phosphorous and pure plated copper are studied for their effectiveness of EMI sheilding. Our first result showed over 35-40dB of shielding effectiveness is achievable on high frequency 868-5800MHz. Nevertheless on low frequency of 10MHz, the shielding effectiveness achievement is below than 25dB. To overcome the shielding need for lower frequency, we further expanded our test by choosing ferromagentic material Nicke/Ironl-alloy in combination with thick copper plating. With this new metal combination, EMI shielding effectiveness for lower frequency is improved to 40dB.

48 CFR 750.7106-2 - Amendments without consideration.

Science.gov (United States)

2010-10-01

... consideration. 750.7106-2 Section 750.7106-2 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL... Foreign Policy Interests of the United States 750.7106-2 Amendments without consideration. (a) Where an... of performance, considerations of fairness may make appropriate some adjustment in the contract. ...

Efficient adaptive constrained control with time-varying predefined performance for a hypersonic flight vehicle

Directory of Open Access Journals (Sweden)

Caisheng Wei

2017-03-01

Full Text Available A novel low-complexity adaptive control method, capable of guaranteeing the transient and steady-state tracking performance in the presence of unknown nonlinearities and actuator saturation, is investigated for the longitudinal dynamics of a generic hypersonic flight vehicle. In order to attenuate the negative effects of classical predefined performance function for unknown initial tracking errors, a modified predefined performance function with time-varying design parameters is presented. Under the newly developed predefined performance function, two novel adaptive controllers with low-complexity computation are proposed for velocity and altitude subsystems of the hypersonic flight vehicle, respectively. Wherein, different from neural network-based approximation, a least square support vector machine with only two design parameters is utilized to approximate the unknown hypersonic dynamics. And the relevant ideal weights are obtained by solving a linear system without resorting to specialized optimization algorithms. Based on the approximation by least square support vector machine, only two adaptive scalars are required to be updated online in the parameter projection method. Besides, a new finite-time-convergent differentiator, with a quite simple structure, is proposed to estimate the unknown generated state variables in the newly established normal output-feedback formulation of altitude subsystem. Moreover, it is also employed to obtain accurate estimations for the derivatives of virtual controllers in a recursive design. This avoids the inherent drawback of backstepping — “explosion of terms” and makes the proposed control method achievable for the hypersonic flight vehicle. Further, the compensation design is employed when the saturations of the actuator occur. Finally, the numerical simulations validate the efficiency of the proposed finite-time-convergent differentiator and control method.

Low-water considerations for NPP sites

International Nuclear Information System (INIS)

Jensen, J.; Frank, T.; Wahl, T.

2009-01-01

In the frame of reactor safety considerations flood protection and the evaluation of low-water events are safety relevant issues. Therefore low-water statistics were performed for the coastal region Cuxhaven and the Elbe river estuary. The consideration of the longitudinal profile of water levels during low-tide in connection with surface water effects, morphodynamic changes of the river and anthropogenic modifications is of importance for conclusions concerning the NPP sites in some distance of the reference tide gauge. The authors performed a statistical low-tide analysis for the NPP sites Brunsbuettel and Brokdorf.

Design considerations and operational performance of Anaerobic Digester: A Review

Directory of Open Access Journals (Sweden)

Muzaffar Ahmad Mir

2016-04-01

Full Text Available Due to the decline in fossil fuel reservoirs, the researchers emphasized more on the production of biogas from organic waste. Producing the renewable energy from biodegradable waste helps to overcome the energy crisis and solid waste management, done by anaerobic digestion. Anaerobic digestion is controlled breakdown of organic matter into methane gas (60%, carbon dioxide (40%, trace components along with digested used as soil conditioner. However there is vast dearth of literature regarding the design considerations. The batch digestion system yields a cost-effective and economically viable means for conversion of the food waste to useful energy. It is therefore recommended that such process can be increasingly employed in order to get and simultaneously protect the environment .This paper aims to draw key analysis and concern about the design considerations, analysis of gas production, substrates and inoculums utilization, uses and impacts of biogas.

Identification of Time-Varying Pilot Control Behavior in Multi-Axis Control Tasks

Science.gov (United States)

Zaal, Peter M. T.; Sweet, Barbara T.

2012-01-01

Recent developments in fly-by-wire control architectures for rotorcraft have introduced new interest in the identification of time-varying pilot control behavior in multi-axis control tasks. In this paper a maximum likelihood estimation method is used to estimate the parameters of a pilot model with time-dependent sigmoid functions to characterize time-varying human control behavior. An experiment was performed by 9 general aviation pilots who had to perform a simultaneous roll and pitch control task with time-varying aircraft dynamics. In 8 different conditions, the axis containing the time-varying dynamics and the growth factor of the dynamics were varied, allowing for an analysis of the performance of the estimation method when estimating time-dependent parameter functions. In addition, a detailed analysis of pilots adaptation to the time-varying aircraft dynamics in both the roll and pitch axes could be performed. Pilot control behavior in both axes was significantly affected by the time-varying aircraft dynamics in roll and pitch, and by the growth factor. The main effect was found in the axis that contained the time-varying dynamics. However, pilot control behavior also changed over time in the axis not containing the time-varying aircraft dynamics. This indicates that some cross coupling exists in the perception and control processes between the roll and pitch axes.

Sodium effects on mechanical performance and consideration in high temperature structural design for advanced reactors

Science.gov (United States)

Natesan, K.; Li, Meimei; Chopra, O. K.; Majumdar, S.

2009-07-01

Sodium environmental effects are key limiting factors in the high temperature structural design of advanced sodium-cooled reactors. A guideline is needed to incorporate environmental effects in the ASME design rules to improve the performance reliability over long operating times. This paper summarizes the influence of sodium exposure on mechanical performance of selected austenitic stainless and ferritic/martensitic steels. Focus is on Type 316SS and mod.9Cr-1Mo. The sodium effects were evaluated by comparing the mechanical properties data in air and sodium. Carburization and decarburization were found to be the key factors that determine the tensile and creep properties of the steels. A beneficial effect of sodium exposure on fatigue life was observed under fully reversed cyclic loading in both austenitic stainless steels and ferritic/martensitic steels. However, when hold time was applied during cyclic loading, the fatigue life was significantly reduced. Based on the mechanical performance of the steels in sodium, consideration of sodium effects in high temperature structural design of advanced fast reactors is discussed.

Estimating varying coefficients for partial differential equation models.

Science.gov (United States)

Zhang, Xinyu; Cao, Jiguo; Carroll, Raymond J

2017-09-01

Partial differential equations (PDEs) are used to model complex dynamical systems in multiple dimensions, and their parameters often have important scientific interpretations. In some applications, PDE parameters are not constant but can change depending on the values of covariates, a feature that we call varying coefficients. We propose a parameter cascading method to estimate varying coefficients in PDE models from noisy data. Our estimates of the varying coefficients are shown to be consistent and asymptotically normally distributed. The performance of our method is evaluated by a simulation study and by an empirical study estimating three varying coefficients in a PDE model arising from LIDAR data. © 2017, The International Biometric Society.

Performance equations of proton exchange membrane fuel cells with feeds of varying degrees of humidification

International Nuclear Information System (INIS)

Hsuen, Hsiao-Kuo; Yin, Ken-Ming

2012-01-01

Performance equations that describe the dependence of cell potential on current density for proton exchange membrane fuel cells (PEMFCs) with feeds of varying degrees of humidification have been formulated in algebraic form. The equations are developed by the reduction of a one-dimensional multi-domain model that takes into account, in details, the transport limitations of gas species, proton migration and electron conduction, electrochemical kinetics, as well as liquid water flow within the cathode, anode, and membrane. The model equations for the anode and membrane were integrated with those of the cathode developed in the previous studies to form a complete set of equations for one-dimensional single cell model. Because the transport equations for the anode diffuser can be solved analytically, calculations of integrals are only needed in the membrane and the two-phase region of cathode diffuser. The proposed approach greatly reduces the complexity of the model equations, and only iterations of a single algebraic equation are required to obtain final solutions. Since the performance equations are originated from a mechanistic one-dimensional model, all the parameters appearing in the equations are endowed with a precise physical significance.

Vibration condition monitoring of planetary gearbox under varying external load

Energy Technology Data Exchange (ETDEWEB)

Bartelmus, W.; Zimroz, R. [Wroclaw University of Technology, Wroclaw (Poland)

2009-01-15

The paper shows that for condition monitoring of planetary gearboxes it is important to identify the external varying load condition. In the paper, systematic consideration has been taken of the influence of many factors on the vibration signals generated by a system in which a planetary gearbox is included. These considerations give the basis for vibration signal interpretation, development of the means of condition monitoring, and for the scenario of the degradation of the planetary gearbox. Real measured vibration signals obtained in the industrial environment are processed. The signals are recorded during normal operation of the diagnosed objects, namely planetary gearboxes, which are a part of the driving system used in a bucket wheel excavator, used in lignite mines. It has been found that the most important factor of the proper planetary gearbox condition is connected with perturbation of arm rotation, where an arm rotation gives rise to a specific vibration signal whose properties are depicted by a short-time Fourier transform (STFT) and Wigner-Ville distribution presented as a time-frequency map. The paper gives evidence that there are two dominant low-frequency causes that influence vibration signal modulation, i.e. the varying load, which comes from the nature of the bucket wheel digging process, and the arm/carrier rotation. These two causes determine the condition of the planetary gearboxes considered.

Channel Characteristics and Performance of MIMO E-SDM Systems in an Indoor Time-Varying Fading Environment

Directory of Open Access Journals (Sweden)

Huu Phu Bui

2010-01-01

Full Text Available Multiple-input multiple-output (MIMO systems employ advanced signal processing techniques. However, the performance is affected by propagation environments and antenna characteristics. The main contributions of the paper are to investigate Doppler spectrum based on measured data in a typical meeting room and to evaluate the performance of MIMO systems based on an eigenbeam-space division multiplexing (E-SDM technique in an indoor time-varying fading environment, which has various distributions of scatterers, line-of-sight wave existence, and mutual coupling effect among antennas. We confirm that due to the mutual coupling among antennas, patterns of antenna elements are changed and different from an omnidirectional one of a single antenna. Results based on the measured channel data in our measurement campaigns show that received power, channel autocorrelation, and Doppler spectrum are dependent not only on the direction of terminal motion but also on the antenna configuration. Even in the obstructed-line-of-sight environment, observed Doppler spectrum is quite different from the theoretical U-shaped Jakes one. In addition, it has been also shown that a channel change during the time interval between the transmit weight matrix determination and the actual data transmission can degrade the performance of MIMO E-SDM systems.

Current Practices in Global/International Advanced Pharmacy Practice Experiences: Preceptor and Student Considerations.

Science.gov (United States)

Dornblaser, Emily K; Ratka, Anna; Gleason, Shaun E; Ombengi, David N; Tofade, Toyin; Wigle, Patricia R; Zapantis, Antonia; Ryan, Melody; Connor, Sharon; Jonkman, Lauren J; Ochs, Leslie; Jungnickel, Paul W; Abrons, Jeanine P; Alsharif, Naser Z

2016-04-25

The objective of this article is to describe the key areas of consideration for global/international advanced pharmacy practice experience (G/I APPE) preceptors, students and learning objectives. At the 2013 Annual Meeting of the American Association of Colleges of Pharmacy (AACP), the GPE SIG prepared and presented an initial report on the G/IAPPE initiatives. Round table discussions were conducted at the 2014 AACP Annual Meeting to document GPE SIG member input on key areas in the report. Literature search of PubMed, Google Scholar and EMBASE with keywords was conducted to expand this report. In this paper, considerations related to preceptors and students and learning outcomes are described. Preceptors for G/I APPEs may vary based on the learning outcomes of the experience. Student learning outcomes for G/I APPEs may vary based on the type of experiential site. Recommendations and future directions for development of G/IAPPEs are presented. Development of a successful G/I APPE requires significant planning and consideration of appropriate qualifications for preceptors and students.

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water reflected (i.e., surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established. When evaluating arrays, it has become more common for analysts to use calculations to demonstrate the safety of the array configuration. In performing these calculations, the analyst has considerable freedom concerning the assumptions made for modeling the reflection of the array. Considerations are given for the physical layout of the array with little or no discussion (or demonstration) of what conditions are bounded by the assumed reflection conditions. For example, an array may be generically evaluated by placing it in a corner of a room in which the opposing walls are far away. Typically, it is believed that complete flooding of the room is incredible, so the array is evaluated for various levels of water mist interspersed among array containers. This paper discusses some assumptions that are made regarding storage array reflection

CONSIDERATIONS ON MEASURING PERFORMANCE AND MARKET STRUCTURE

OpenAIRE

Spiridon Cosmin Alexandru

2011-01-01

According to neoclassical theory, the relationship between the price, respectively of marginal cost and market structures, the methods for determining the performance of a firm or of an industry, deviate from the model of perfect competition. Assessing performance involves performing comparisons, reporting that their reference level can be a standard value, or a statistical value which can be a national-regional average, a homogeneous group, or an average value at a market level. Modern theor...

How Is Working Memory Training Likely to Influence Academic Performance? Current Evidence and Methodological Considerations.

Science.gov (United States)

Bergman Nutley, Sissela; Söderqvist, Stina

2017-01-01

Working memory (WM) is one of our core cognitive functions, allowing us to keep information in mind for shorter periods of time and then work with this information. It is the gateway that information has to pass in order to be processed consciously. A well-functioning WM is therefore crucial for a number of everyday activities including learning and academic performance (Gathercole et al., 2003; Bull et al., 2008), which is the focus of this review. Specifically, we will review the research investigating whether improving WM capacity using Cogmed WM training can lead to improvements on academic performance. Emphasis is given to reviewing the theoretical principles upon which such investigations rely, in particular the complex relation between WM and mathematical and reading abilities during development and how these are likely to be influenced by training. We suggest two possible routes in which training can influence academic performance, one through an effect on learning capacity which would thus be evident with time and education, and one through an immediate effect on performance on reading and mathematical tasks. Based on the theoretical complexity described we highlight some methodological issues that are important to take into consideration when designing and interpreting research on WM training and academic performance, but that are nonetheless often overlooked in the current research literature. Finally, we will provide some suggestions for future research for advancing the understanding of WM training and its potential role in supporting academic attainment.

Navigation performance in virtual environments varies with fractal dimension of landscape

OpenAIRE

Juliani, Arthur W.; Bies, Alexander J.; Boydston, Cooper R.; Taylor, Richard P.; Sereno, Margaret E.

2016-01-01

Fractal geometry has been used to describe natural and built environments, but has yet to be studied in navigational research. In order to establish a relationship between the fractal dimension (D) of a natural environment and humans’ ability to navigate such spaces, we conducted two experiments using virtual environments that simulate the fractal properties of nature. In Experiment 1, participants completed a goal-driven search task either with or without a map in landscapes that varied in D...

Does model performance improve with complexity? A case study with three hydrological models

Science.gov (United States)

Orth, Rene; Staudinger, Maria; Seneviratne, Sonia I.; Seibert, Jan; Zappa, Massimiliano

2015-04-01

In recent decades considerable progress has been made in climate model development. Following the massive increase in computational power, models became more sophisticated. At the same time also simple conceptual models have advanced. In this study we validate and compare three hydrological models of different complexity to investigate whether their performance varies accordingly. For this purpose we use runoff and also soil moisture measurements, which allow a truly independent validation, from several sites across Switzerland. The models are calibrated in similar ways with the same runoff data. Our results show that the more complex models HBV and PREVAH outperform the simple water balance model (SWBM) in case of runoff but not for soil moisture. Furthermore the most sophisticated PREVAH model shows an added value compared to the HBV model only in case of soil moisture. Focusing on extreme events we find generally improved performance of the SWBM during drought conditions and degraded agreement with observations during wet extremes. For the more complex models we find the opposite behavior, probably because they were primarily developed for prediction of runoff extremes. As expected given their complexity, HBV and PREVAH have more problems with over-fitting. All models show a tendency towards better performance in lower altitudes as opposed to (pre-) alpine sites. The results vary considerably across the investigated sites. In contrast, the different metrics we consider to estimate the agreement between models and observations lead to similar conclusions, indicating that the performance of the considered models is similar at different time scales as well as for anomalies and long-term means. We conclude that added complexity does not necessarily lead to improved performance of hydrological models, and that performance can vary greatly depending on the considered hydrological variable (e.g. runoff vs. soil moisture) or hydrological conditions (floods vs. droughts).

Applications, dosimetry and biological interactions of static and time-varying magnetic fields

International Nuclear Information System (INIS)

Tenforde, T.S.

1988-08-01

The primary topics of this presentation include: (1) the applications of magnetic fields in research, industry, and medical technologies; (2) mechanisms of interaction of static and time-varying magnetic fields with living systems; (3) human health effects of exposure to static and time-varying magnetic fields in occupational, medical, and residential settings; and (4) recent advances in the dosimetry of extremely-low-frequency electromagnetic fields. The discussion of these topics is centered about two issues of considerable contemporary interest: (1) potential health effects of the fields used in magnetic resonance imaging and in vivo spectroscopy, and (2) the controversial issue of whether exposure to extremely-low-frequency (ELF) electromagnetic fields in the home and workplace leads to an elevated risk of cancer. 11 refs

Response of rabbits to varying levels of cassava and Leucaena ...

African Journals Online (AJOL)

Response of rabbits to varying levels of cassava and Leucaena leucocephala leaf meal diets. ... Bulletin of Animal Health and Production in Africa ... An experiment was carried out to determine the performance, haematology, carcass characteristics and sensory evaluation of meat from rabbits (n = 30) fed varying levels of ...

Contribution on the influence of transformation structures under consideration of austenite deformation

International Nuclear Information System (INIS)

Peisker, D.; Doktorowski, A.; Dittrich, D.

2001-01-01

Hot forming represents a substantial part of the manufacturing process of many steel products. The crucial microstructural transformation process, which influences the characteristics of a steel considerably, is undisputed the γ/α-transformation. A successful aid to the interpretation of possible microstructural transformation processes during cooling from the austenitizing or deformation temperature is the determination and handling of CCT diagrams. In this article two steels are examined which differ only in their titanium content. Dilatometric investigations were performed varying the three parameters' transformation temperature, strain and cooling strategy. The insights gathered are illustrated and discussed with the aid of CCT diagrams. An additional transformation below A c1 with a brief curing reheat up to A c3 + 20 K leads to a substantially finer structure. The exploitation of this effect may be of great industrial importance. (orig.)

Evolution of perturbation in charge-varying dusty plasmas

International Nuclear Information System (INIS)

Popel, S.I.; Golub, A.P.; Losseva, T.V.; Bingham, R.; Benkadda, S.

2001-01-01

The nonstationary problem of the evolution of perturbation and its transformation into nonlinear wave structure in dusty plasmas is considered. For this purpose two one-dimensional models based on a set of fluid equations, Poisson's equation, and a charging equation for dust are developed. The first (simplified) model corresponds to the case [Popel et al., Phys. Plasmas 3, 4313 (1996)] when exact steady-state shock wave solutions can exist. This simplified model includes variable-charged dust grains, Boltzmann electrons, and inertial ions. The second (ionization source) model takes into account the variation of the ion density and the ion momentum dissipation due to dust particle charging as well as the source of plasma particles due to ionization process. The computational method for solving the set of equations which describe the evolution in time of a nonlinear structure in a charge-varying dusty plasma is developed. The case of the evolution of an intensive initial nonmoving region with a constant enhanced ion density is investigated on the basis of these two models. The consideration within the ionization source model is performed for the data of the laboratory experiment [Luo et al., Phys. Plasmas 6, 3455 (1999)]. It is shown that the ionization source model allows one to obtain shock structures as a result of evolution of an initial perturbation and to explain the experimental value of the width of the shock wave front. Comparison of the numerical data obtained on the basis of the ionization source model and the simplified model shows that the main characteristic features of the shock structure are the same for both models. Nevertheless, the ionization source model is much more sensitive to the form of the initial perturbation than the simplified model. The solution of the problem of the evolution of perturbation and its transformation into shock wave in charge-varying dusty plasmas opens up possibilities for description of the real phenomena like supernova

Analysis on Passivity for Uncertain Neural Networks with Time-Varying Delays

Directory of Open Access Journals (Sweden)

O. M. Kwon

2014-01-01

Full Text Available The problem of passivity analysis for neural networks with time-varying delays and parameter uncertainties is considered. By the consideration of newly constructed Lyapunov-Krasovskii functionals, improved sufficient conditions to guarantee the passivity of the concerned networks are proposed with the framework of linear matrix inequalities (LMIs, which can be solved easily by various efficient convex optimization algorithms. The enhancement of the feasible region of the proposed criteria is shown via two numerical examples by the comparison of maximum allowable delay bounds.

Robust and Fault-Tolerant Linear Parameter-Varying Control of Wind Turbines

DEFF Research Database (Denmark)

Sloth, Christoffer; Esbensen, Thomas; Stoustrup, Jakob

2011-01-01

High performance and reliability are required for wind turbines to be competitive within the energy market. To capture their nonlinear behavior, wind turbines are often modeled using parameter-varying models. In this paper we design and compare multiple linear parameter-varying (LPV) controllers,...

Effect of TiOx compact layer with varied components on the performance of dye-sensitized solar cells

Energy Technology Data Exchange (ETDEWEB)

Fang, Yanling; Ai, Xianglong; Wang, Xiaomeng; Wang, Qi; Huang, Jianguo; Wu, Tao, E-mail: tao_wu@zju.edu.cn

2014-05-01

Graphical abstract: - Highlights: • TiOx compact layers with varied components are deposited by sputtering deposition. • TiOx compact layers suppressed the recombination at the FTO glass/ electrolyte interface effectively. • 20 nm-TiOx compact layer with the lowest x value (named T1) gave the highest charge transfer or transport and reduced recombination most. • Lower value of x in TiOx showed slightly better transmittance. • Lower value of x in TiOx reveals higher conductivity and better charge transfer from the porous TiO{sub 2} to the substrate. - Abstract: In this study, approximately 20 nm thick compact layers of TiOx with varied components are deposited by physical vapor deposition. The performance of these layers in solar cells is investigated. The TiOx compact layers consist of T1 (with Ti{sup 0}, Ti{sup 2+}, Ti{sup 3+}, and Ti{sup 4+}), T2 (with Ti{sup 3+} and Ti{sup 4+}), and T3 (with Ti{sup 4+}). Results show that the optimum compact layer is T1, which exhibits an approximately 61% enhancement in energy conversion efficiency compared with the bare cell. Mott–Schottky plots indicate that the carrier concentration decreases and the flatband becomes less negative with decreasing x, which consequently increases the likelihood of charge transfer from the nanoporous TiO{sub 2} to the TiOx compact layers. Furthermore, a decrease in the x value of TiOx results in lower resistance. Voltage decay and electrical impedance spectrum (EIS) show that the electron-carrier lifetime and charge recombination reduction are improved the most by T1. Consequently, TiOx with smaller x works better as a compact layer. However, a solar cell with T2 shows weak enhancement of photovoltaic performance. Cyclic voltammetry and EIS illustrate that the low recombination blocking and high resistance of T2 may be a result of its large pore size and weak adhesion to fluorine-doped tin oxide glass.

Methodological considerations for economic modelling of latent tuberculous infection screening in migrants.

Science.gov (United States)

Shedrawy, J; Siroka, A; Oxlade, O; Matteelli, A; Lönnroth, K

2017-09-01

Tuberculosis (TB) in migrants from endemic to low-incidence countries results mainly from the reactivation of latent tuberculous infection (LTBI). LTBI screening policies for migrants vary greatly between countries, and the evidence on the cost-effectiveness of the different approaches is weak and heterogeneous. The aim of this review was to assess the methodology used in published economic evaluations of LTBI screening among migrants to identify critical methodological options that must be considered when using modelling to determine value for money from different economic perspectives. Three electronic databases were searched and 10 articles were included. There was considerable variation across this small number of studies with regard to economic perspective, main outcomes, modelling technique, screening options and target populations considered, as well as in parameterisation of the epidemiological situation, test accuracy, efficacy, safety and programme performance. Only one study adopted a societal perspective; others adopted a health care or wider government perspective. Parameters representing the cascade of screening and treating LTBI varied widely, with some studies using highly aspirational scenarios. This review emphasises the need for a more harmonised approach for economic analysis, and better transparency in how policy options and economic perspectives influence methodological choices. Variability is justifiable for some parameters. However, sufficient data are available to standardise others. A societal perspective is ideal, but can be challenging due to limited data. Assumptions about programme performance should be based on empirical data or at least realistic assumptions. Results should be interpreted within specific contexts and policy options, with cautious generalisations.

Primate auditory recognition memory performance varies with sound type.

Science.gov (United States)

Ng, Chi-Wing; Plakke, Bethany; Poremba, Amy

2009-10-01

Neural correlates of auditory processing, including for species-specific vocalizations that convey biological and ethological significance (e.g., social status, kinship, environment), have been identified in a wide variety of areas including the temporal and frontal cortices. However, few studies elucidate how non-human primates interact with these vocalization signals when they are challenged by tasks requiring auditory discrimination, recognition and/or memory. The present study employs a delayed matching-to-sample task with auditory stimuli to examine auditory memory performance of rhesus macaques (Macaca mulatta), wherein two sounds are determined to be the same or different. Rhesus macaques seem to have relatively poor short-term memory with auditory stimuli, and we examine if particular sound types are more favorable for memory performance. Experiment 1 suggests memory performance with vocalization sound types (particularly monkey), are significantly better than when using non-vocalization sound types, and male monkeys outperform female monkeys overall. Experiment 2, controlling for number of sound exemplars and presentation pairings across types, replicates Experiment 1, demonstrating better performance or decreased response latencies, depending on trial type, to species-specific monkey vocalizations. The findings cannot be explained by acoustic differences between monkey vocalizations and the other sound types, suggesting the biological, and/or ethological meaning of these sounds are more effective for auditory memory. 2009 Elsevier B.V.

Belowground Plant–Herbivore Interactions Vary among Climate-Driven Range-Expanding Plant Species with Different Degrees of Novel Chemistry

Directory of Open Access Journals (Sweden)

Rutger A. Wilschut

2017-10-01

Full Text Available An increasing number of studies report plant range expansions to higher latitudes and altitudes in response to global warming. However, consequences for interactions with other species in the novel ranges are poorly understood. Here, we examine how range-expanding plant species interact with root-feeding nematodes from the new range. Root-feeding nematodes are ubiquitous belowground herbivores that may impact the structure and composition of natural vegetation. Because of their ecological novelty, we hypothesized that range-expanding plant species will be less suitable hosts for root-feeding nematodes than native congeneric plant species. In greenhouse and lab trials we compared nematode preference and performance of two root-feeding nematode species between range-expanding plant species and their congeneric natives. In order to understand differences in nematode preferences, we compared root volatile profiles of all range-expanders and congeneric natives. Nematode preferences and performances differed substantially among the pairs of range-expanders and natives. The range-expander that had the most unique volatile profile compared to its related native was unattractive and a poor host for nematodes. Other range-expanding plant species that differed less in root chemistry from native congeners, also differed less in nematode attraction and performance. We conclude that the three climate-driven range-expanding plant species studied varied considerably in their chemical novelty compared to their congeneric natives, and therefore affected native root-feeding nematodes in species-specific ways. Our data suggest that through variation in chemical novelty, range-expanding plant species may vary in their impacts on belowground herbivores in the new range.

Electrostatic potential in a bent piezoelectric nanowire with consideration of size-dependent piezoelectricity and semiconducting characterization

Science.gov (United States)

Wang, K. F.; Wang, B. L.

2018-06-01

Determining the electric potential in a bent piezoelectric nanowire (NW) is a fundamental issue of nanogenerators and nanopiezotronics. The combined influence of the flexoelectric effect, the semiconducting performance and the angle of atomic force microscope (AFM) tip has never been studied previously and will be investigated in this paper. The exact solution for the electric potential of a bent piezoelectric semiconductor NW is derived. The electric potential of the present model with consideration of flexoelectric effect varies along the length of the NW and is different from that of the classical piezoelectric model. Flexoelectric effect enhances but the semiconducting performance reduces the electric potential of the NW. In addition, it is found that if the angle of the AFM tip reaches 30°, the error of the electric potential obtained from the model ignored the effect of the angle of the AFM tip is almost 16%, which is unacceptable.

Performance of broiler chicken fed varied nutrient density diets supplemented with direct fed microbial

Directory of Open Access Journals (Sweden)

Katoch S.

2013-01-01

Full Text Available Comparative dietary response of different isolated strains (Direct fed microbial- DFM of lactobacilli, streptococci and yeast isolated from leopard feces (Panthera leo was studied as probiotic in poultry broiler birds reared as per varied mineral densities viz. calcium and phosphorus. Various treatments consisted of T0 (Control, culture medium, T1 (Lactobacillus casei + Streptococcus fecalis + Saccharomyces cerevisiae offered standard formulated diet D1, T2 - Control (Culture medium offered ten percent lower calcium and phosphorus diet D2, T3 (Lactobacillus casei + Streptococcus fecalis + Saccharomyces cerevisiae offered ten percent lower calcium and phosphorus diet D2. Growth results obtained during the starter phase (1st to 3rd week exhibited higher gain in live body weight and lower feed conversion ratio, both by DFM supplemented treatment T1 offered standard formulated diet D1 and treatment T3 offered experimentally formulated mineral (Ca and P deficient (10% diet D2 compared to respective control T0 and T2. The obtained results revealed a significantly higher growth performance in treatment T1 compared to its control T0 where a higher growth in treatment T3 offered experimentally formulated mineral (Ca and P deficient (10% diet D2 supplemented with isolated DFM compared to its control T2 was exhibited. Treatment groups T1 and T3 supplemented with isolated DFM exhibited a better intestinal micro flora balance, effective colonization and higher count in the intestinal tract with higher calcium and phosphorus retention in the digestibility studies. Thus, it was found that supplementation of isolated DFM has the potential to improve biological growth performance of poultry broiler birds offered both standard formulated diet D1, as well as mineral deficient diet D2. [Projekat Ministarstva nauke Republike Srbije, br. III 46002

Consideration of drainage ditches and sediment rating cure on SWAT model performance

Science.gov (United States)

Water quality models most often require a considerable amount of data to be properly configured and in some cases this requires additional procedural steps prior to model applications. We examined two different scenarios of such input issues in a small watershed using the Soil and Water Assessment ...

Endogenous time-varying risk aversion and asset returns.

Science.gov (United States)

Berardi, Michele

2016-01-01

Stylized facts about statistical properties for short horizon returns in financial markets have been identified in the literature, but a satisfactory understanding for their manifestation is yet to be achieved. In this work, we show that a simple asset pricing model with representative agent is able to generate time series of returns that replicate such stylized facts if the risk aversion coefficient is allowed to change endogenously over time in response to unexpected excess returns under evolutionary forces. The same model, under constant risk aversion, would instead generate returns that are essentially Gaussian. We conclude that an endogenous time-varying risk aversion represents a very parsimonious way to make the model match real data on key statistical properties, and therefore deserves careful consideration from economists and practitioners alike.

Design considerations for mechanical face seals

Science.gov (United States)

Ludwig, L. P.; Greiner, H. F.

1980-01-01

Two companion reports deal with design considerations for improving performance of mechanical face seals, one of family of devices used in general area of fluid sealing of rotating shafts. One report deals with basic seal configuration and other with lubrication of seal.

Robust Stabilization of Nonlinear Systems with Uncertain Varying Control Coefficient

Directory of Open Access Journals (Sweden)

Zaiyue Yang

2014-01-01

Full Text Available This paper investigates the stabilization problem for a class of nonlinear systems, whose control coefficient is uncertain and varies continuously in value and sign. The study emphasizes the development of a robust control that consists of a modified Nussbaum function to tackle the uncertain varying control coefficient. By such a method, the finite-time escape phenomenon has been prevented when the control coefficient is crossing zero and varying its sign. The proposed control guarantees the asymptotic stabilization of the system and boundedness of all closed-loop signals. The control performance is illustrated by a numerical simulation.

Linear Parameter Varying Control of Induction Motors

DEFF Research Database (Denmark)

Trangbæk, Klaus

The subject of this thesis is the development of linear parameter varying (LPV) controllers and observers for control of induction motors. The induction motor is one of the most common machines in industrial applications. Being a highly nonlinear system, it poses challenging control problems...... for high performance applications. This thesis demonstrates how LPV control theory provides a systematic way to achieve good performance for these problems. The main contributions of this thesis are the application of the LPV control theory to induction motor control as well as various contributions...

Semantic interference in picture naming during dual-task performance does not vary with reading ability.

Science.gov (United States)

Piai, Vitória; Roelofs, Ardi; Roete, Ingeborg

2015-01-01

Previous dual-task studies examining the locus of semantic interference of distractor words in picture naming have obtained diverging results. In these studies, participants manually responded to tones and named pictures while ignoring distractor words (picture-word interference, PWI) with varying stimulus onset asynchrony (SOA) between tone and PWI stimulus. Whereas some studies observed no semantic interference at short SOAs, other studies observed effects of similar magnitude at short and long SOAs. The absence of semantic interference in some studies may perhaps be due to better reading skill of participants in these than in the other studies. According to such a reading-ability account, participants' reading skill should be predictive of the magnitude of their interference effect at short SOAs. To test this account, we conducted a dual-task study with tone discrimination and PWI tasks and measured participants' reading ability. The semantic interference effect was of similar magnitude at both short and long SOAs. Participants' reading ability was predictive of their naming speed but not of their semantic interference effect, contrary to the reading ability account. We conclude that the magnitude of semantic interference in picture naming during dual-task performance does not depend on reading skill.

Alcohol in Moderation, Cardioprotection and Neuroprotection: Epidemiological Considerations and Mechanistic Studies

OpenAIRE

Collins, Michael A.; Neafsey, Edward J.; Mukamal, Kenneth J.; Gray, Mary O.; Parks, Dale A.; Das, Dipak K.; Korthuis, Ronald J.

2008-01-01

In contrast to many years of important research and clinical attention to the pathological effects of alcohol (ethanol) abuse, the past several decades have seen the publication of a number of peer-reviewed studies indicating beneficial effects of light-moderate, non-binge consumption of varied alcoholic beverages, as well as experimental demonstrations that moderate alcohol exposure can initiate typically cytoprotective mechanisms. A considerable body of epidemiology associates moderate alco...

Electrostatic potential in a bent piezoelectric nanowire with consideration of size-dependent piezoelectricity and semiconducting characterization.

Science.gov (United States)

Wang, Kaifa; Wang, Baolin

2018-03-26

Determining the electric potential in a bent piezoelectric nanowire (NW) is a fundamental issue of nanogenerators and nanopiezotronics. The combined influence of the flexoelectric effect, the semiconducting performance and the angle of atomic force microscope (AFM) tip has never been studied previously and will be investigated in this paper. The exact solution for the electric potential of a bent piezoelectric semiconductor NW is derived. The electric potential of the present model with consideration of flexoelectric effect varies along the length of the NW and is different from that of the classical piezoelectric model. Flexoelectric effect enhances but the semiconducting performance reduces the electric potential of the NW. In addition, it is found that if the angle of the AFM tip reaches 30 degrees, the error of the electric potential obtained from the model ignored the effect of the angle of the AFM tip is almost 16%, which is unacceptable. © 2018 IOP Publishing Ltd.

Considerations on the Assessment and Use of Cycling Performance Metrics and their Integration in the Athlete's Biological Passport

Directory of Open Access Journals (Sweden)

Paolo Menaspà

2017-11-01

Full Text Available Over the past few decades the possibility to capture real-time data from road cyclists has drastically improved. Given the increasing pressure for improved transparency and openness, there has been an increase in publication of cyclists' physiological and performance data. Recently, it has been suggested that the use of such performance biometrics may be used to strengthen the sensitivity and applicability of the Athlete Biological Passport (ABP and aid in the fight against doping. This is an interesting concept which has merit, although there are several important factors that need to be considered. These factors include accuracy of the data collected and validity (and reliability of the subsequent performance modeling. In order to guarantee high quality standards, the implementation of well-structured Quality-Systems within sporting organizations should be considered, and external certifications may be required. Various modeling techniques have been developed, many of which are based on fundamental intensity/time relationships. These models have increased our understanding of performance but are currently limited in their application, for example due to the largely unaccounted effects of environmental factors such as, heat and altitude. In conclusion, in order to use power data as a performance biometric to be integrated in the biological passport, a number of actions must be taken to ensure accuracy of the data and better understand road cycling performance in the field. This article aims to outline considerations in the quantification of cycling performance, also presenting an alternative method (i.e., monitoring race results to allow for determination of unusual performance improvements.

SSTO vs TSTO design considerations—an assessment of the overall performance, design considerations, technologies, costs, and sensitivities of SSTO and TSTO designs using modern technologies

Science.gov (United States)

Penn, Jay P.

1996-03-01

It is generally believed by those skilled in launch system design that Single-Stage-To-Orbit (SSTO) designs are more technically challenging, more performance sensitive, and yield larger lift-off weights than do Two-Stage-To-Orbit designs (TSTO's) offering similar payload delivery capability. Without additional insight into the other considerations which drive the development, recurring costs, operability, and reliability of a launch fleet, an analyst may easily conclude that the higher performing, less sensitive TSTO designs, thus yield a better solution to achieving low cost payload delivery. This limited insight could justify an argument to eliminate the X-33 SSTO technology/demonstration development effort, and thus proceed directly to less risky TSTO designs. Insight into real world design considerations of launch vehicles makes the choice of SSTO vs TSTO much less clear. The presentation addresses a more comprehensive evaluation of the general class of SSTO and TSTO concepts. These include pure SSTO's, augmented SSTO's, Siamese Twin, and Pure TSTO designs. The assessment considers vehicle performance and scaling relationships which characterize real vehicle designs. The assessment also addresses technology requirements, operations and supportability, cost implications, and sensitivities. Results of the assessment indicate that the trade space between various SSTO and TSTO design approaches is complex and not yet fully understood. The results of the X-33 technology demonstrators, as well as additional parametric analysis is required to better define the relative performance and costs of the various design approaches. The results also indicate that with modern technologies and today's better understanding of vehicle design considerations, the perception that SSTO's are dramatically heavier and more sensitive than TSTO designs is more of a myth, than reality.

Identification of time-varying nonlinear systems using differential evolution algorithm

DEFF Research Database (Denmark)

Perisic, Nevena; Green, Peter L; Worden, Keith

2013-01-01

(DE) algorithm for the identification of time-varying systems. DE is an evolutionary optimisation method developed to perform direct search in a continuous space without requiring any derivative estimation. DE is modified so that the objective function changes with time to account for the continuing......, thus identification of time-varying systems with nonlinearities can be a very challenging task. In order to avoid conventional least squares and gradient identification methods which require uni-modal and double differentiable objective functions, this work proposes a modified differential evolution...... inclusion of new data within an error metric. This paper presents results of identification of a time-varying SDOF system with Coulomb friction using simulated noise-free and noisy data for the case of time-varying friction coefficient, stiffness and damping. The obtained results are promising and the focus...

Analysis of rosen piezoelectric transformers with a varying cross-section.

Science.gov (United States)

Xue, H; Yang, J; Hu, Y

2008-07-01

We study the effects of a varying cross-section on the performance of Rosen piezoelectric transformers operating with length extensional modes of rods. A theoretical analysis is performed using an extended version of a one-dimensional model developed in a previous paper. Numerical results based on the theoretical analysis are presented.

Varying influences of motivation factors on employees' likelihood to perform safe food handling practices because of demographic differences.

Science.gov (United States)

Ellis, Jason D; Arendt, Susan W; Strohbehn, Catherine H; Meyer, Janell; Paez, Paola

2010-11-01

Food safety training has been the primary avenue for ensuring food workers are performing proper food handling practices and thus, serving safe food. Yet, knowledge of safe food handling practices does not necessarily result in actual performance of these practices. This research identified participating food service employees' level of agreement with four factors of motivation (internal motivations, communication, reward-punishment, and resources) and determined if respondents with different demographic characteristics reported different motivating factors. Data were collected from 311 food service employees who did not have any supervisory responsibilities. Intrinsic motivation agreement scores were consistently the highest of all four motivational factors evaluated and did not differ across any of the demographic characteristics considered. In contrast, motivation agreement scores for communication, reward-punishment, and resources did differ based on respondents' gender, age, place of employment, job status, food service experience, completion of food handler course, or possession of a food safety certification. In general, respondents agreed that these motivation factors influenced their likelihood to perform various safe food handling procedures. This research begins to illustrate how employees' demographic characteristics influence their responses to various motivators, helping to clarify the complex situation of ensuring safe food in retail establishments. Future research into why employee willingness to perform varies more for extrinsic motivation than for intrinsic motivation could assist food service managers in structuring employee development programs and the work environment, in a manner that aids in improving external motivation (communication, reward-punishment, and resources) and capitalizing on internal motivation.

Employer Requirements to Work during Emergency Responses: Key Ethics Considerations.

Science.gov (United States)

Rutkow, Lainie; Taylor, Holly A; Powell, Tia

2017-03-01

Local health departments and their employees are at the forefront of emergency preparedness and response. Yet, recent studies have found that some local public health workers are unwilling to report to work in a variety of disaster scenarios. This can greatly compromise a response, as many local health departments need "all hands on deck" to effectively meet increased demands. To address these concerns, local health departments have employed varied policy strategies to ensure that employees do report to work. After describing different approaches taken by local health departments throughout the United States, we briefly identify and explore key ethics considerations that arise for local health departments when employees are required to report to work for emergency responses. We then discuss how these ethics considerations may inform local health department practices intended to promote a robust emergency response.

Curating Performance on the Edge of the Art Museum

DEFF Research Database (Denmark)

Groth, Sanne Krogh; Schwarzbart, Judith

two-day festival offers a format that vary considerable from the exhibition series the museum puts on most of the time. The performance program includes artists such as composers usually working with contemporary music, electronic music composers, as well as performance artists working from......Since the Intermedia and Fluxus movements a variety of timebased artforms have been contained within visual art contexts. The performative works draw often as much on the tradition of theatre, music, dance, and poetry reading as fine art. Although the institutional context plays a role...... art institution. Our research relates specifically to a festival for performative art, ACTS 2014, which we co-curate for the Museum of Contemporary Art in Roskilde. Having grown out of a Fluxus spirit, the museum is not foreign to time-based practices like many museums are. Nevertheless, the intensive...

Device and performance parameters of Cu(In,Ga)(Se,S)2-based solar cells with varying i-ZnO layer thickness

International Nuclear Information System (INIS)

Macabebe, E.Q.B.; Sheppard, C.J.; Dyk, E.E. van

2009-01-01

In pursuit of low-cost and highly efficient thin film solar cells, Cu(In,Ga)(Se,S) 2 /CdS/i-ZnO/ZnO:Al (CIGSS) solar cells were fabricated using a two-step process. The thickness of i-ZnO layer was varied from 0 to 454 nm. The current density-voltage (J-V) characteristics of the devices were measured, and the device and performance parameters of the solar cells were obtained from the J-V curves to analyze the effect of varying i-ZnO layer thickness. The device parameters were determined using a parameter extraction method that utilized particle swarm optimization. The method is a curve-fitting routine that employed the two-diode model. The J-V curves of the solar cells were fitted with the model and the parameters were determined. Results show that as the thickness of i-ZnO was increased, the average efficiency and the fill factor (FF) of the solar cells increase. Device parameters reveal that although the series resistance increased with thicker i-ZnO layer, the solar cells absorbed more photons resulting in higher short-circuit current density (J sc ) and, consequently, higher photo-generated current density (J L ). For solar cells with 303-454 nm-thick i-ZnO layer, the best devices achieved efficiency between 15.24% and 15.73% and the fill factor varied between 0.65 and 0.67.

Performance of cable-in-conduit conductors in ITER [International Thermonuclear Experimental Reactor] toroidal field coils with varying heat loads

International Nuclear Information System (INIS)

Kerns, J.A.; Wong, R.L.

1989-01-01

The toroidal field (TF) coils in the International Thermonuclear Experimental Reactor (ITER) will operate with varying heat loads generated by ac losses and nuclear heating. The total heat load is estimated to be 2 kW per TF coil under normal operation and can be higher for different operating scenarios. Ac losses are caused by ramping the poloidal field (PF) for plasma initiation, burn, and shutdown; nuclear heating results from neutrons that penetrate into the coil past the shield. Present methods to reduce or eliminate these losses lead to larger and more expensive machines, which are unacceptable with today's budget constraints. A suitable solution is to design superconductors that operate with high heat loads. The cable-in-conduit conductor (CICC) can operate with high heat loads. One CICC design is analyzed for its thermal performance using two computer codes developed at LLNL. One code calculates the steady state flow conditions along the flow path, while the other calculates the transient conditions in the flow. We have used these codes to analyze the superconductor performance during the burn phase of the ITER plasma. The results of these analyses give insight to the choice of flow rate on superconductor performance. 4 refs., 5 figs

An empirical research on customer satisfaction study: a consideration of different levels of performance.

Science.gov (United States)

Lee, Yu-Cheng; Wang, Yu-Che; Lu, Shu-Chiung; Hsieh, Yi-Fang; Chien, Chih-Hung; Tsai, Sang-Bing; Dong, Weiwei

2016-01-01

Customer satisfaction is the key factor for successful and depends highly on the behaviors of frontline service providers. Customers should be managed as assets, and that customers vary in their needs, preferences, and buying behavior. This study applied the Taiwan Customer Satisfaction Index model to a tourism factory to analyze customer satisfaction and loyalty. We surveyed 242 customers served by one tourism factory organizations in Taiwan. A partial least squares was performed to analyze and test the theoretical model. The results show that perceived quality had the greatest influence on the customer satisfaction for satisfied and dissatisfied customers. In addition, in terms of customer loyalty, the customer satisfaction is more important than image for satisfied and dissatisfied customers. The contribution of this paper is to propose two satisfaction levels of CSI models for analyzing customer satisfaction and loyalty, thereby helping tourism factory managers improve customer satisfaction effectively. Compared with traditional techniques, we believe that our method is more appropriate for making decisions about allocating resources and for assisting managers in establishing appropriate priorities in customer satisfaction management.

The Fast Simulation of Scattering Characteristics from a Simplified Time Varying Sea Surface

Directory of Open Access Journals (Sweden)

Yiwen Wei

2015-01-01

Full Text Available This paper aims at applying a simplified sea surface model into the physical optics (PO method to accelerate the scattering calculation from 1D time varying sea surface. To reduce the number of the segments and make further improvement on the efficiency of PO method, a simplified sea surface is proposed. In this simplified sea surface, the geometry of long waves is locally approximated by tilted facets that are much longer than the electromagnetic wavelength. The capillary waves are considered to be sinusoidal line superimposing on the long waves. The wavenumber of the sinusoidal waves is supposed to satisfy the resonant condition of Bragg waves which is dominant in all the scattered short wave components. Since the capillary wave is periodical within one facet, an analytical integration of the PO term can be performed. The backscattering coefficient obtained from a simplified sea surface model agrees well with that obtained from a realistic sea surface. The Doppler shifts and width also agree well with the realistic model since the capillary waves are taken into consideration. The good agreements indicate that the simplified model is reasonable and valid in predicting both the scattering coefficients and the Doppler spectra.

Performance analysis of PV panel under varying surface temperature

Directory of Open Access Journals (Sweden)

Kumar Tripathi Abhishek

2018-01-01

Full Text Available The surface temperature of PV panel has an adverse impact on its performance. The several electrical parameters of PV panel, such as open circuit voltage, short circuit current, power output and fill factor depends on the surface temperature of PV panel. In the present study, an experimental work was carried out to investigate the influence of PV panel surface temperature on its electrical parameters. The results obtained from this experimental study show a significant reduction in the performance of PV panel with an increase in panel surface temperature. A 5W PV panel experienced a 0.4% decrease in open circuit voltage for every 1°C increase in panel surface temperature. Similarly, there was 0.6% and 0.32% decrease in maximum power output and in fill factor, respectively, for every 1°C increase in panel surface temperature. On the other hand, the short circuit current increases with the increase in surface temperature at the rate of 0.09%/°C.

Future so bright? Delay discounting and consideration of future consequences predict academic performance among college drinkers.

Science.gov (United States)

Acuff, Samuel F; Soltis, Kathryn E; Dennhardt, Ashley A; Borsari, Brian; Martens, Matthew P; Murphy, James G

2017-10-01

College student drinking is a major public health concern and can result in a range of negative consequences, from acute health risks to decreased academic performance and drop out. Harm reduction interventions have been developed to reduce problems associated with drinking but there is a need to identify specific risk/protective factors related to academic performance among college drinkers. Behavioral economics suggests that chronic alcohol misuse reflects a dysregulated behavioral process or reinforcer pathology-alcohol is overvalued and the value of prosocial rewards are sharply discounted due, in part, to their delay. This study examined delay discounting, consideration of future consequences (CFC) and protective behavioral strategies (PBS) as predictors of academic success (grade point average; GPA) and engagement (time devoted to academic activities) among 393 college drinkers (61% female). In multivariate models, PBS were associated with greater academic engagement, but were not with academic success. Lower discounting of delayed rewards and greater CFC were associated with both academic success and engagement among drinkers. Previous research suggests that future time orientation is malleable, and the current results provide support for efforts to enhance future time orientation as part of alcohol harm-reduction approaches. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Hierarchical classification of dynamically varying radar pulse repetition interval modulation patterns.

Science.gov (United States)

Kauppi, Jukka-Pekka; Martikainen, Kalle; Ruotsalainen, Ulla

2010-12-01

The central purpose of passive signal intercept receivers is to perform automatic categorization of unknown radar signals. Currently, there is an urgent need to develop intelligent classification algorithms for these devices due to emerging complexity of radar waveforms. Especially multifunction radars (MFRs) capable of performing several simultaneous tasks by utilizing complex, dynamically varying scheduled waveforms are a major challenge for automatic pattern classification systems. To assist recognition of complex radar emissions in modern intercept receivers, we have developed a novel method to recognize dynamically varying pulse repetition interval (PRI) modulation patterns emitted by MFRs. We use robust feature extraction and classifier design techniques to assist recognition in unpredictable real-world signal environments. We classify received pulse trains hierarchically which allows unambiguous detection of the subpatterns using a sliding window. Accuracy, robustness and reliability of the technique are demonstrated with extensive simulations using both static and dynamically varying PRI modulation patterns. Copyright © 2010 Elsevier Ltd. All rights reserved.

Modelling and Control of Ionic Electroactive Polymer Actuators under Varying Humidity Conditions

Directory of Open Access Journals (Sweden)

S. Sunjai Nakshatharan

2018-02-01

Full Text Available In this work, we address the problem of position control of ionic electroactive polymer soft actuators under varying relative humidity conditions. The impact of humidity on the actuation performance of ionic actuators is studied through frequency response and impedance spectroscopy analysis. Considering the uncertain performance of the actuator under varying humidity conditions, an adaptable model using the neural network method is developed. The model uses relative humidity magnitude as one of the model parameters, making it robust to different environmental conditions. Utilizing the model, a closed-loop controller based on the model predictive controller is developed for position control of the actuator. The developed model and controller are experimentally verified and found to be capable of predicting and controlling the actuators with excellent tracking accuracy under relative humidity conditions varying in the range of 10–90%.

Consideration of Command and Control Performance during Accident Management Process at the Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Nisrene M. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Sok Chul [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

The accident at the Fukushima Daiichi nuclear power plants shifted the nuclear safety paradigm from risk management to on-site management capability during a severe accident. The kernel of on-site management capability during an accident at a nuclear power plant is situation awareness and agility of command and control. However, little consideration has been given to accident management. After the events of September 11, 2001 and the catastrophic Fukushima nuclear disaster, agility of command and control has emerged as a significant element for effective and efficient accident management, with many studies emphasizing accident management strategies, particularly man-machine interface, which is considered a key role in ensuring nuclear power plant safety during severe accident conditions. This paper proposes a conceptual model for evaluating command and control performance during the accident management process at a nuclear power plant. Communication and information processing while responding to an accident is one of the key issues needed to mitigate the accident. This model will give guidelines for accurate and fast communication response during accident conditions.

Passion and Pacing in Endurance Performance.

Science.gov (United States)

Schiphof-Godart, Lieke; Hettinga, Florentina J

2017-01-01

Endurance sports are booming, with sports passionates of varying skills and expertise battering city streets and back roads on their weekly or daily exercise rounds. The investments required for performing in endurance exercise are nevertheless considerable, and passion for their sport might explain the efforts endurance athletes are willing to make. Passion may be defined as a strong motivational force and as such might be related to the neurophysiological basis underlying the drive to exercise. A complex relationship between the brain and other systems is responsible for athletes' exercise behavior and thus performance in sports. We anticipate important consequences of athletes' short term choices, for example concerning risk taking actions, on long term outcomes, such as injuries, overtraining and burnout. We propose to consider athletes' type of passion, in combination with neurophysiological parameters, as an explanatory factor inunderstanding the apparent disparity in the regulation of exercise intensity during endurance sports. Previous research has demonstrated that athletes can be passionate toward their sport in either a harmonious or an obsessive way. Although both lead to considerable investments and therefore often to successful performances, obsessive passion may affect athlete well-being and performance on the long run, due to the corresponding inflexible exercise behavior. In this perspective we will thus examine the influence of passion in sport on athletes' short term and long term decision-making and exercise behavior, in particular related to the regulation of exercise intensity, and discuss the expected long term effects of both types of passion for sport.

Structured Linear Parameter Varying Control of Wind Turbines

DEFF Research Database (Denmark)

Adegas, Fabiano Daher; Sloth, Christoffer; Stoustrup, Jakob

2012-01-01

High performance and reliability are required for wind turbines to be competitive within the energy market. To capture their nonlinear behavior, wind turbines are often modeled using parameter-varying models. In this chapter, a framework for modelling and controller design of wind turbines is pre...... in the controller synthesis are solved by an iterative LMI-based algorithm. The resulting controllers can also be easily implemented in practice due to low data storage and simple math operations. The performance of the LPV controllers is assessed by nonlinear simulations results....

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water-reflected (i.e. surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established

Time varying, multivariate volume data reduction

Energy Technology Data Exchange (ETDEWEB)

Ahrens, James P [Los Alamos National Laboratory; Fout, Nathaniel [UC DAVIS; Ma, Kwan - Liu [UC DAVIS

2010-01-01

Large-scale supercomputing is revolutionizing the way science is conducted. A growing challenge, however, is understanding the massive quantities of data produced by large-scale simulations. The data, typically time-varying, multivariate, and volumetric, can occupy from hundreds of gigabytes to several terabytes of storage space. Transferring and processing volume data of such sizes is prohibitively expensive and resource intensive. Although it may not be possible to entirely alleviate these problems, data compression should be considered as part of a viable solution, especially when the primary means of data analysis is volume rendering. In this paper we present our study of multivariate compression, which exploits correlations among related variables, for volume rendering. Two configurations for multidimensional compression based on vector quantization are examined. We emphasize quality reconstruction and interactive rendering, which leads us to a solution using graphics hardware to perform on-the-fly decompression during rendering. In this paper we present a solution which addresses the need for data reduction in large supercomputing environments where data resulting from simulations occupies tremendous amounts of storage. Our solution employs a lossy encoding scheme to acrueve data reduction with several options in terms of rate-distortion behavior. We focus on encoding of multiple variables together, with optional compression in space and time. The compressed volumes can be rendered directly with commodity graphics cards at interactive frame rates and rendering quality similar to that of static volume renderers. Compression results using a multivariate time-varying data set indicate that encoding multiple variables results in acceptable performance in the case of spatial and temporal encoding as compared to independent compression of variables. The relative performance of spatial vs. temporal compression is data dependent, although temporal compression has the

Nonlinear control of linear parameter varying systems with applications to hypersonic vehicles

Science.gov (United States)

Wilcox, Zachary Donald

The focus of this dissertation is to design a controller for linear parameter varying (LPV) systems, apply it specifically to air-breathing hypersonic vehicles, and examine the interplay between control performance and the structural dynamics design. Specifically a Lyapunov-based continuous robust controller is developed that yields exponential tracking of a reference model, despite the presence of bounded, nonvanishing disturbances. The hypersonic vehicle has time varying parameters, specifically temperature profiles, and its dynamics can be reduced to an LPV system with additive disturbances. Since the HSV can be modeled as an LPV system the proposed control design is directly applicable. The control performance is directly examined through simulations. A wide variety of applications exist that can be effectively modeled as LPV systems. In particular, flight systems have historically been modeled as LPV systems and associated control tools have been applied such as gain-scheduling, linear matrix inequalities (LMIs), linear fractional transformations (LFT), and mu-types. However, as the type of flight environments and trajectories become more demanding, the traditional LPV controllers may no longer be sufficient. In particular, hypersonic flight vehicles (HSVs) present an inherently difficult problem because of the nonlinear aerothermoelastic coupling effects in the dynamics. HSV flight conditions produce temperature variations that can alter both the structural dynamics and flight dynamics. Starting with the full nonlinear dynamics, the aerothermoelastic effects are modeled by a temperature dependent, parameter varying state-space representation with added disturbances. The model includes an uncertain parameter varying state matrix, an uncertain parameter varying non-square (column deficient) input matrix, and an additive bounded disturbance. In this dissertation, a robust dynamic controller is formulated for a uncertain and disturbed LPV system. The developed

Material and design considerations of FBGA reliability performance

International Nuclear Information System (INIS)

Lee, Teck Kheng; Ng, T.C.; Chai, Y.M.

2004-01-01

FBGA package reliability is usually assessed through the conventional approaches of die attach and mold compound material optimization. However, with the rapid changes and fast-moving pace of electronic packaging and the introduction of new soldermask and core materials, substrate design has also become a critical factor in determining overall package reliability. The purpose of this paper is to understand the impact design and soldermask material of a rigid substrate on overall package reliability. Three different soldermask patterns with a matrix of different die attach, mold compound, and soldermask materials are assessed using the moisture sensitivity test (MST). Package reliability is also assessed through the use of temperature cycling (T/C) at conditions 'B' and 'C'. For material optimization, three different mold compounds and die attach materials are used. Material adhesion between different die attach materials and soldermask materials are obtained through die shear performed at various temperatures and preset moisture conditions. A study correlating the different packaging material properties and their relative adhesion strengths with overall package reliability in terms of both MST and T/C performance was performed. Soldermask design under the die pads was found to affect package reliability. For example, locating vias at the edge of the die is not desirable because the vias acts as initiation point for delamination and moisture-induced failure. Through die shear testing, soldermask B demonstrated higher adhesion properties compared to soldermask A across several packaging materials and enhanced the overall package reliability in terms of both MST and T/C performance. Both MST JEDEC level 1 and the T/C of 'B' and 'C' at 1000 cycles have been achieved through design and package material optimization

Synchronization of uncertain time-varying network based on sliding mode control technique

Science.gov (United States)

Lü, Ling; Li, Chengren; Bai, Suyuan; Li, Gang; Rong, Tingting; Gao, Yan; Yan, Zhe

2017-09-01

We research synchronization of uncertain time-varying network based on sliding mode control technique. The sliding mode control technique is first modified so that it can be applied to network synchronization. Further, by choosing the appropriate sliding surface, the identification law of uncertain parameter, the adaptive law of the time-varying coupling matrix element and the control input of network are designed, it is sure that the uncertain time-varying network can synchronize effectively the synchronization target. At last, we perform some numerical simulations to demonstrate the effectiveness of the proposed results.

Progress on MEVVA source VARIS at GSI

Science.gov (United States)

Adonin, A.; Hollinger, R.

2018-05-01

For the last few years, the development of the VARIS (vacuum arc ion source) was concentrated on several aspects. One of them was the production of high current ion beams of heavy metals such as Au, Pb, and Bi. The requested ion charge state for these ion species is 4+. This is quite challenging to produce in vacuum arc driven sources for reasonable beam pulse length (>120 µs) due to the physical properties of these elements. However, the situation can be dramatically improved by using the composite materials or alloys with enhanced physical properties of the cathodes. Another aspect is an increase of the beam brilliance for intense U4+ beams by the optimization of the geometry of the extraction system. A new 7-hole triode extraction system allows an increase of the extraction voltage from 30 kV to 40 kV and also reduces the outer aperture of the extracted ion beam. Thus, a record beam brilliance for the U4+ beam in front of the RFQ (Radio-Frequency Quadrupole) has been achieved, exceeding the RFQ space charge limit for an ion current of 15 mA. Several new projectiles in the middle-heavy region have been successfully developed from VARIS to fulfill the requirements of the future FAIR (Facility for Antiproton and Ion Research) programs. An influence of an auxiliary gas on the production performance of certain ion charge states as well as on operation stability has been investigated. The optimization of the ion source parameters for a maximum production efficiency and highest particle current in front of the RFQ has been performed. The next important aspect of the development will be the increase of the operation repetition rate of VARIS for all elements especially for uranium to 2.7 Hz in order to provide the maximum availability of high current ion beams for future FAIR experiments.

Semantic interference in picture naming during dual-task performance does not vary with reading ability

NARCIS (Netherlands)

Piai, V.; Roelofs, A.P.A.; Roete, I.E.C.

2015-01-01

Previous dual-task studies examining the locus of semantic interference of distractor words in picture naming have obtained diverging results. In these studies, participants manually responded to tones and named pictures while ignoring distractor words (picture-word interference, PWI) with varying

Device and performance parameters of Cu(In,Ga)(Se,S){sub 2}-based solar cells with varying i-ZnO layer thickness

Energy Technology Data Exchange (ETDEWEB)

Macabebe, E.Q.B. [Department of Physics, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa); Sheppard, C.J. [Department of Physics, University of Johannesburg, P.O. Box 524, Auckland Park 2006 (South Africa); Dyk, E.E. van, E-mail: ernest.vandyk@nmmu.ac.z [Department of Physics, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa)

2009-12-01

In pursuit of low-cost and highly efficient thin film solar cells, Cu(In,Ga)(Se,S){sub 2}/CdS/i-ZnO/ZnO:Al (CIGSS) solar cells were fabricated using a two-step process. The thickness of i-ZnO layer was varied from 0 to 454 nm. The current density-voltage (J-V) characteristics of the devices were measured, and the device and performance parameters of the solar cells were obtained from the J-V curves to analyze the effect of varying i-ZnO layer thickness. The device parameters were determined using a parameter extraction method that utilized particle swarm optimization. The method is a curve-fitting routine that employed the two-diode model. The J-V curves of the solar cells were fitted with the model and the parameters were determined. Results show that as the thickness of i-ZnO was increased, the average efficiency and the fill factor (FF) of the solar cells increase. Device parameters reveal that although the series resistance increased with thicker i-ZnO layer, the solar cells absorbed more photons resulting in higher short-circuit current density (J{sub sc}) and, consequently, higher photo-generated current density (J{sub L}). For solar cells with 303-454 nm-thick i-ZnO layer, the best devices achieved efficiency between 15.24% and 15.73% and the fill factor varied between 0.65 and 0.67.

Material and design considerations of FBGA reliability performance

Energy Technology Data Exchange (ETDEWEB)

Lee, Teck Kheng; Ng, T.C.; Chai, Y.M

2004-09-01

FBGA package reliability is usually assessed through the conventional approaches of die attach and mold compound material optimization. However, with the rapid changes and fast-moving pace of electronic packaging and the introduction of new soldermask and core materials, substrate design has also become a critical factor in determining overall package reliability. The purpose of this paper is to understand the impact design and soldermask material of a rigid substrate on overall package reliability. Three different soldermask patterns with a matrix of different die attach, mold compound, and soldermask materials are assessed using the moisture sensitivity test (MST). Package reliability is also assessed through the use of temperature cycling (T/C) at conditions 'B' and 'C'. For material optimization, three different mold compounds and die attach materials are used. Material adhesion between different die attach materials and soldermask materials are obtained through die shear performed at various temperatures and preset moisture conditions. A study correlating the different packaging material properties and their relative adhesion strengths with overall package reliability in terms of both MST and T/C performance was performed. Soldermask design under the die pads was found to affect package reliability. For example, locating vias at the edge of the die is not desirable because the vias acts as initiation point for delamination and moisture-induced failure. Through die shear testing, soldermask B demonstrated higher adhesion properties compared to soldermask A across several packaging materials and enhanced the overall package reliability in terms of both MST and T/C performance. Both MST JEDEC level 1 and the T/C of 'B' and 'C' at 1000 cycles have been achieved through design and package material optimization.

Partially linear varying coefficient models stratified by a functional covariate

KAUST Repository

Maity, Arnab

2012-10-01

We consider the problem of estimation in semiparametric varying coefficient models where the covariate modifying the varying coefficients is functional and is modeled nonparametrically. We develop a kernel-based estimator of the nonparametric component and a profiling estimator of the parametric component of the model and derive their asymptotic properties. Specifically, we show the consistency of the nonparametric functional estimates and derive the asymptotic expansion of the estimates of the parametric component. We illustrate the performance of our methodology using a simulation study and a real data application.

Linear parameter-varying control for engineering applications

CERN Document Server

White, Andrew P; Choi, Jongeun

2013-01-01

The objective of this brief is to carefully illustrate a procedure of applying linear parameter-varying (LPV) control to a class of dynamic systems via a systematic synthesis of gain-scheduling controllers with guaranteed stability and performance. The existing LPV control theories rely on the use of either H-infinity or H2 norm to specify the performance of the LPV system.  The challenge that arises with LPV control for engineers is twofold. First, there is no systematic procedure for applying existing LPV control system theory to solve practical engineering problems from modeling to control design. Second, there exists no LPV control synthesis theory to design LPV controllers with hard constraints. For example, physical systems usually have hard constraints on their required performance outputs along with their sensors and actuators. Furthermore, the H-infinity and H2 performance criteria cannot provide hard constraints on system outputs. As a result, engineers in industry could find it difficult to utiliz...

Phase behaviour of oat β-glucan/sodium caseinate mixtures varying in molecular weight.

Science.gov (United States)

Agbenorhevi, Jacob K; Kontogiorgos, Vassilis; Kasapis, Stefan

2013-05-01

The isothermal phase behaviour at 5 °C of mixtures of sodium caseinate and oat β-glucan isolates varying in molecular weight (MW) was investigated by means of phase diagram construction, rheometry, fluorescence microscopy and electrophoresis. Phase diagrams indicated that the compatibility of the β-glucan/sodium caseinate system increases as β-glucan MW decreases. Images of mixtures taken at various biopolymer concentrations revealed phase separated domains. Results also revealed that at the state of thermodynamic equilibrium, lower MW samples yielded considerable viscosity in the mixture. At equivalent hydrodynamic volume of β-glucan in the mixtures, samples varying in molecular weight exhibited similar flow behaviour. A deviation dependent on the protein concentration was observed for the high MW sample in the concentrated regime due to the size of β-glucan aggregates formed. Results demonstrate that by controlling the structural features of β-glucan in mixtures with sodium caseinate, informed manipulation of rheological properties in these systems can be achieved. Copyright © 2012 Elsevier Ltd. All rights reserved.

Special considerations for electric submersible pump applications in underpressured reservoirs

International Nuclear Information System (INIS)

Powers, M.L.

1991-01-01

This paper investigates the effect of electric submersible pump performance tolerances and minor speed variations on the producing rate of wells completed in underpressured reservoirs, and presents ESP design considerations which are unique for this class of wells. These wells require considerable head to initiate flow and have relatively flat well-load curves. Pumps that operate near their maximum recommended rate have steep performance curves. it is shown that this minimizes the effect of an underperforming pump on producing rate. Equations are developed for calculating the effects of pump performance and speed. Application requires evaluating the slopes of the pump performance curve and well-load curve at design rate. Utility of these equations is demonstrated by practical examples. It is also demonstrated that flow-stall can easily occur in underpressured reservoir applications when pumps designed to operate near their minimum recommended rate are installed

Polycystic Ovary Syndrome: Update on Treatment Options and Treatment Considerations for the Future

OpenAIRE

Kristen A. Farrell-Turner

2011-01-01

Polycystic ovary syndrome is an endocrine disorder characterized by insulin resistance, hyperandrogenemia, obesity, and inflammation, and is the most common cause of infertility. Women with PCOS are at higher risk than non-PCOS women for diabetes, cardiovascular disease, endometrial cancer, and psychiatric disorders. Because many abnormalities present in PCOS and symptoms vary considerably among PCOS women, treatment is guided by presentation and does not consist of simply one modality. Often...

Multimodal Pilot Behavior in Multi-Axis Tracking Tasks with Time-Varying Motion Cueing Gains

Science.gov (United States)

Zaal, P. M. T; Pool, D. M.

2014-01-01

In a large number of motion-base simulators, adaptive motion filters are utilized to maximize the use of the available motion envelope of the motion system. However, not much is known about how the time-varying characteristics of such adaptive filters affect pilots when performing manual aircraft control. This paper presents the results of a study investigating the effects of time-varying motion filter gains on pilot control behavior and performance. An experiment was performed in a motion-base simulator where participants performed a simultaneous roll and pitch tracking task, while the roll and/or pitch motion filter gains changed over time. Results indicate that performance increases over time with increasing motion gains. This increase is a result of a time-varying adaptation of pilots' equalization dynamics, characterized by increased visual and motion response gains and decreased visual lead time constants. Opposite trends are found for decreasing motion filter gains. Even though the trends in both controlled axes are found to be largely the same, effects are less significant in roll. In addition, results indicate minor cross-coupling effects between pitch and roll, where a cueing variation in one axis affects the behavior adopted in the other axis.

A Novel Method for Assessing Task Complexity in Outpatient Clinical-Performance Measures.

Science.gov (United States)

Hysong, Sylvia J; Amspoker, Amber B; Petersen, Laura A

2016-04-01

Clinical-performance measurement has helped improve the quality of health-care; yet success in attaining high levels of quality across multiple domains simultaneously still varies considerably. Although many sources of variability in care quality have been studied, the difficulty required to complete the clinical work itself has received little attention. We present a task-based methodology for evaluating the difficulty of clinical-performance measures (CPMs) by assessing the complexity of their component requisite tasks. Using Functional Job Analysis (FJA), subject-matter experts (SMEs) generated task lists for 17 CPMs; task lists were rated on ten dimensions of complexity, and then aggregated into difficulty composites. Eleven outpatient work SMEs; 133 VA Medical Centers nationwide. Clinical Performance: 17 outpatient CPMs (2000-2008) at 133 VA Medical Centers nationwide. Measure Difficulty: for each CPM, the number of component requisite tasks and the average rating across ten FJA complexity scales for the set of tasks comprising the measure. Measures varied considerably in the number of component tasks (M = 10.56, SD = 6.25, min = 5, max = 25). Measures of chronic care following acute myocardial infarction exhibited significantly higher measure difficulty ratings compared to diabetes or screening measures, but not to immunization measures ([Formula: see text] = 0.45, -0.04, -0.05, and -0.06 respectively; F (3, 186) = 3.57, p = 0.015). Measure difficulty ratings were not significantly correlated with the number of component tasks (r = -0.30, p = 0.23). Evaluating the difficulty of achieving recommended CPM performance levels requires more than simply counting the tasks involved; using FJA to assess the complexity of CPMs' component tasks presents an alternate means of assessing the difficulty of primary-care CPMs and accounting for performance variation among measures and performers. This in turn could be used in designing

Manufacturing considerations for AMLCD cockpit displays

Science.gov (United States)

Luo, Fang-Chen

1995-06-01

AMLCD cockpit displays need to meet more stringent requirements compared with AMLCD commercial displays in areas such as environmental conditions, optical performance and device reliability. Special considerations are required for the manufacturing of AMLCD cockpit displays in each process step to address these issues. Some examples are: UV stable polarizers, wide-temperature LC material, strong LC glue seal, ESS test system, gray scale voltage EEPROM, etc.

Reliable Memory Feedback Design for a Class of Nonlinear Fuzzy Systems with Time-varying Delay

Institute of Scientific and Technical Information of China (English)

You-Qing Wang; Dong-Hua Zhou; Li-Heng Liu

2007-01-01

This paper is concerned with the robust reliable memory controller design for a class of fuzzy uncertain systems with time-varying delay. The system under consideration is more general than those in other existent works. The controller, which is dependent on the magnitudes and derivative of the delay, is proposed in terms of linear matrix inequality (LMI). The closed-loop system is asymptotically stable for all admissible uncertainties as well as actuator faults. A numerical example is presented for illustration.

Practical Considerations for Clinical PET/MR Imaging.

Science.gov (United States)

Galgano, Samuel; Viets, Zachary; Fowler, Kathryn; Gore, Lael; Thomas, John V; McNamara, Michelle; McConathy, Jonathan

2018-01-01

Clinical PET/MR imaging is currently performed at a number of centers around the world as part of routine standard of care. This article focuses on issues and considerations for a clinical PET/MR imaging program, focusing on routine standard-of-care studies. Although local factors influence how clinical PET/MR imaging is implemented, the approaches and considerations described here intend to apply to most clinical programs. PET/MR imaging provides many more options than PET/computed tomography with diagnostic advantages for certain clinical applications but with added complexity. A recurring theme is matching the PET/MR imaging protocol to the clinical application to balance diagnostic accuracy with efficiency. Copyright © 2017 Elsevier Inc. All rights reserved.

Neural-adaptive control of single-master-multiple-slaves teleoperation for coordinated multiple mobile manipulators with time-varying communication delays and input uncertainties.

Science.gov (United States)

Li, Zhijun; Su, Chun-Yi

2013-09-01

In this paper, adaptive neural network control is investigated for single-master-multiple-slaves teleoperation in consideration of time delays and input dead-zone uncertainties for multiple mobile manipulators carrying a common object in a cooperative manner. Firstly, concise dynamics of teleoperation systems consisting of a single master robot, multiple coordinated slave robots, and the object are developed in the task space. To handle asymmetric time-varying delays in communication channels and unknown asymmetric input dead zones, the nonlinear dynamics of the teleoperation system are transformed into two subsystems through feedback linearization: local master or slave dynamics including the unknown input dead zones and delayed dynamics for the purpose of synchronization. Then, a model reference neural network control strategy based on linear matrix inequalities (LMI) and adaptive techniques is proposed. The developed control approach ensures that the defined tracking errors converge to zero whereas the coordination internal force errors remain bounded and can be made arbitrarily small. Throughout this paper, stability analysis is performed via explicit Lyapunov techniques under specific LMI conditions. The proposed adaptive neural network control scheme is robust against motion disturbances, parametric uncertainties, time-varying delays, and input dead zones, which is validated by simulation studies.

A time-varying magnetic flux concentrator

International Nuclear Information System (INIS)

Kibret, B; Premaratne, M; Lewis, P M; Thomson, R; Fitzgerald, P B

2016-01-01

It is known that diverse technological applications require the use of focused magnetic fields. This has driven the quest for controlling the magnetic field. Recently, the principles in transformation optics and metamaterials have allowed the realization of practical static magnetic flux concentrators. Extending such progress, here, we propose a time-varying magnetic flux concentrator cylindrical shell that uses electric conductors and ferromagnetic materials to guide magnetic flux to its center. Its performance is discussed based on finite-element simulation results. Our proposed design has potential applications in magnetic sensors, medical devices, wireless power transfer, and near-field wireless communications. (paper)

Technical note - Considerations for MR imaging of small animals

International Nuclear Information System (INIS)

Baker, Martin A.

2011-01-01

Routine clinical veterinary use of MR scanning is becoming more common. This article addresses the major technical considerations for radiographers performing MR examinations on small animals and provides practical advice for scanning techniques.

Some considerations for validation of repository performance assessment models

International Nuclear Information System (INIS)

Eisenberg, N.

1991-01-01

Validation is an important aspect of the regulatory uses of performance assessment. A substantial body of literature exists indicating the manner in which validation of models is usually pursued. Because performance models for a nuclear waste repository cannot be tested over the long time periods for which the model must make predictions, the usual avenue for model validation is precluded. Further impediments to model validation include a lack of fundamental scientific theory to describe important aspects of repository performance and an inability to easily deduce the complex, intricate structures characteristic of a natural system. A successful strategy for validation must attempt to resolve these difficulties in a direct fashion. Although some procedural aspects will be important, the main reliance of validation should be on scientific substance and logical rigor. The level of validation needed will be mandated, in part, by the uses to which these models are put, rather than by the ideal of validation of a scientific theory. Because of the importance of the validation of performance assessment models, the NRC staff has engaged in a program of research and international cooperation to seek progress in this important area. 2 figs., 16 refs

Varying ultrasound power level to distinguish surgical instruments and tissue.

Science.gov (United States)

Ren, Hongliang; Anuraj, Banani; Dupont, Pierre E

2018-03-01

We investigate a new framework of surgical instrument detection based on power-varying ultrasound images with simple and efficient pixel-wise intensity processing. Without using complicated feature extraction methods, we identified the instrument with an estimated optimal power level and by comparing pixel values of varying transducer power level images. The proposed framework exploits the physics of ultrasound imaging system by varying the transducer power level to effectively distinguish metallic surgical instruments from tissue. This power-varying image-guidance is motivated from our observations that ultrasound imaging at different power levels exhibit different contrast enhancement capabilities between tissue and instruments in ultrasound-guided robotic beating-heart surgery. Using lower transducer power levels (ranging from 40 to 75% of the rated lowest ultrasound power levels of the two tested ultrasound scanners) can effectively suppress the strong imaging artifacts from metallic instruments and thus, can be utilized together with the images from normal transducer power levels to enhance the separability between instrument and tissue, improving intraoperative instrument tracking accuracy from the acquired noisy ultrasound volumetric images. We performed experiments in phantoms and ex vivo hearts in water tank environments. The proposed multi-level power-varying ultrasound imaging approach can identify robotic instruments of high acoustic impedance from low-signal-to-noise-ratio ultrasound images by power adjustments.

Design considerations for energy efficient, resilient, multi-layer networks

DEFF Research Database (Denmark)

Fagertun, Anna Manolova; Hansen, Line Pyndt; Ruepp, Sarah Renée

2016-01-01

measures. In this complex problem, considerations such as client traffic granularity, applied grooming policies and multi-layer resiliency add even more complexity. A commercially available network planning tool is used to investigate the interplay between different methods for resilient capacity planning......This work investigates different network design considerations with respect to energy-efficiency, under green-field resilient multi-layer network deployment. The problem of energy efficient, reliable multi-layer network design is known to result in different trade-offs between key performance....... Switching off low-utilized transport links has been investigated via a pro-active re-routing applied during the network planning. Our analysis shows that design factors such as the applied survivability strategy and the applied planning method have higher impact on the key performance indicators compared...

Performative Social Science: A Consideration of Skills, Purpose and Context

Directory of Open Access Journals (Sweden)

Brian Roberts

2008-05-01

Full Text Available This article reviews recent work applying a notion of "performance" in the study and representation of lives. It tries to clarify some of the issues involved—including the meaning of "performance"—and "performative"—the range of possible approaches (e.g., in addition to drama—other arts and the relationship between "subjects", "researcher" and "audience". An immediate concern is the nature of the researcher—as having the necessary skills and abilities or knowledge involved in "performance" (in researching, writing, recording and representing, as engaged (to some extent in "artistic" endeavour, and moving between a number of "roles" and social relations in "performing" with/to others (the "researched" group, audience and society. An important issue for social science in crossing or bridging the social science-arts, in taking up "performative approaches", is "What remains distinctive about the social science if it becomes involved with performance approaches?" As a source for comparison (and inspiration, some brief reference will be made to the work of KANDINSKY—who moved across disciplinary boundaries and artistic practices—as ethnographer, painter, teacher, designer, theorist and poet. Finally, perhaps, there is a deeper "turn" indicated by the "turn to performance" in the study of lives, a more "complete" portrait of the individual as an active, communicative and sensual being. URN: urn:nbn:de:0114-fqs0802588

Design considerations for on-site spent-fuel transfer systems

International Nuclear Information System (INIS)

Jones, R.H.; Jones, C.R.

1989-06-01

Studies on spent fuel shipping logistics and operation make it clear that the use of large casks, i.e., 100--125 tons, is superior to smaller casks of similar construction. This superiority manifests itself in both transportation and/or shipping economics and safety as well as reduced personnel exposure in the processing of the casks. An on-site system for the transfer of spent fuel from the storage pool to a large shipping or storage cask, as well as the transfer of spent fuel directly from a storage cask to a shipping cask, could bring the large cask benefits to those restricted reactors. Sensing the need to look more closely at this opportunity, EPRI contracted with S. Levy, Incorporated of Campbell, CA to develop a set of design considerations for such transfer systems. Rather then embark on another design study, EPRI decided to first identify the system considerations that must be factored into any design. The format for this effort presents both the Consideration and the Rationale for the consideration. The resulting work identified thirty-six General Considerations and two Special Considerations. The Considerations are in the form of mandatory requirements and desirable but nonmandatory requirements. Additionally, a brief economic study was performed to get a feel for the cost considerations of on-site transfers. The study results suggest a relatively narrow set of scenarios where on-site transfers are economically superior to alternatives. These scenarios generally involve the use of concrete casks as on-site storage devices

Qualitative research in multicultural psychology: philosophical underpinnings, popular approaches, and ethical considerations.

Science.gov (United States)

Ponterotto, Joseph G

2010-10-01

This article reviews the current and emerging status of qualitative research in psychology. The particular value of diverse philosophical paradigms and varied inquiry approaches to the advancement of psychology generally, and multicultural psychology specifically, is emphasized. Three specific qualitative inquiry approaches anchored in diverse philosophical research paradigms are highlighted: consensual qualitative research, grounded theory, and participatory action research. The article concludes by highlighting important ethical considerations in multicultural qualitative research. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Environmental compliance considerations for the management of cultural resources

International Nuclear Information System (INIS)

Curtis, S.A.; Whitfield, S.; McGinnis, K.

1987-01-01

This paper examines three key considerations underlying the programmatic management of cultural resources that may be affected by a large federal project. These considerations are statutory background and the compliance process, cultural resource compliance tasks, and quality assurance. The first consideration addresses the legal requirements and steps that must be met and taken for federal agencies to fulfill their cultural resource compliance responsibilities. The second consideration focuses on the tasks that must be performed by technical specialists to facilitate related federal and state compliance actions. The third consideration ensures that compliance requirements are being properly fulfilled. In the technical literature and compliance planning, archaeological and historic sites and Native American cultural resources are grouped under the general heading of cultural resources. Also included under this heading are the traditions and resources of Folk societies. Cultural resources encompass both material and nonmaterial aspects of our cultural heritage and include buildings, structures, objects, sites, districts, archaeological resources, places of religious importance, and unique, distinctive, or unusual lifeways. For compliance purposes, it is useful to treat these resources within four roughly chronological culture-historical periods: prehistoric, ethnohistoric, historic, and contemporary. 6 refs., 6 tabs

Symbiotic effectiveness of rhizobial mutualists varies in interactions with native Australian legume genera.

Directory of Open Access Journals (Sweden)

Peter H Thrall

Full Text Available BACKGROUND AND OBJECTIVES: Interactions between plants and beneficial soil organisms (e.g. rhizobial bacteria, mycorrhizal fungi are models for investigating the ecological impacts of such associations in plant communities, and the evolution and maintenance of variation in mutualisms (e.g. host specificity and the level of benefits provided. With relatively few exceptions, variation in symbiotic effectiveness across wild host species is largely unexplored. METHODS: We evaluated these associations using representatives of several legume genera which commonly co-occur in natural ecosystems in south-eastern Australia and an extensive set of rhizobial strains isolated from these hosts. These strains had been previously assigned to specific phylotypes on the basis of molecular analyses. In the first of two inoculation experiments, the growth responses of each host species was evaluated with rhizobial strains isolated from that species. The second experiment assessed performance across genera and the extent of host specificity using a subset of these strains. RESULTS: While host growth responses to their own (sympatric isolates varied considerably, rhizobial phylotype was a significant predictor of symbiotic performance, indicating that bacterial species designations on the basis of molecular markers have ecological importance. Hosts responded in qualitatively different ways to sympatric and allopatric strains of rhizobia, ranging from species with a clear preference for their own strains, to those that were broad generalists, through to species that grew significantly better with allopatric strains. CONCLUSION: Theory has focused on trade-offs between the provision of benefits and symbiont competitive ability that might explain the persistence of less beneficial strains. However, differences in performance among co-occurring host species could also drive such patterns. Our results thus highlight the likely importance of plant community structure in

Numerical analysis of a PCM thermal storage system with varying wall temperature

International Nuclear Information System (INIS)

Halawa, E.; Bruno, F.; Saman, W.

2005-01-01

Numerical analysis of melting and freezing of a PCM thermal storage unit (TSU) with varying wall temperature is presented. The TSU under analysis consists of several layers of thin slabs of a PCM subjected to convective boundary conditions where air flows between the slabs. The model employed takes into account the variations in wall temperature along the direction of air flow as well as the sensible heat. The paper discusses typical characteristics of the melting/freezing of PCM slabs in an air stream and presents some results of the numerical simulation in terms of air outlet temperatures and heat transfer rates during the whole periods of melting and freezing. Considerations in the design of the TSU are also given

Local Feature Learning for Face Recognition under Varying Poses

DEFF Research Database (Denmark)

Duan, Xiaodong; Tan, Zheng-Hua

2015-01-01

In this paper, we present a local feature learning method for face recognition to deal with varying poses. As opposed to the commonly used approaches of recovering frontal face images from profile views, the proposed method extracts the subject related part from a local feature by removing the pose...... related part in it on the basis of a pose feature. The method has a closed-form solution, hence being time efficient. For performance evaluation, cross pose face recognition experiments are conducted on two public face recognition databases FERET and FEI. The proposed method shows a significant...... recognition improvement under varying poses over general local feature approaches and outperforms or is comparable with related state-of-the-art pose invariant face recognition approaches. Copyright ©2015 by IEEE....

Ballistic performance of a Kevlar-29 woven fibre composite under varied temperatures

Science.gov (United States)

Soykasap, O.; Colakoglu, M.

2010-05-01

Armours are usually manufactured from polymer matrix composites and used for both military and non-military purposes in different seasons, climates, and regions. The mechanical properties of the composites depend on temperature, which also affects their ballistic characteristics. The armour is used to absorb the kinetic energy of a projectile without any major injury to a person. Therefore, besides a high strength and lightness, a high damping capacity is required to absorb the impact energy transferred by the projectile. The ballistic properties of a Kevlar 29/polyvinyl butyral composite are investigated under varied temperatures in this study. The elastic modulus of the composite is determined from the natural frequency of composite specimens at different temperatures by using a damping monitoring method. Then, the backside deformation of composite plates is analysed experimentally and numerically employing the finite-element program Abaqus. The experimental and numeric results obtained are in good agreement.

Measuring and managing health system performance: An update from New Zealand.

Science.gov (United States)

Chalmers, Linda Maree; Ashton, Toni; Tenbensel, Tim

2017-08-01

In July 2016, New Zealand introduced a new approach to measuring and monitoring health system performance. This 'Systems Level Measure Framework' (SLMF) has evolved from the Integrated Performance and Incentive Framework (IPIF) previously reported in this journal. The SLMF is designed to stimulate a 'whole of system' approach that requires inter-organisational collaboration. Local 'Alliances' between government and non-government health sector organisations are responsible for planning and achieving improved health system outcomes such as reducing ambulatory sensitive hospitalisation for young children, and reducing acute hospital bed days. It marks a shift from the previous regime of output and process targets, and from a pay-for-performance approach to primary care. Some elements of the earlier IPIF proposal, such as general practice quality measures, and tiered levels of performance, were not included in the SLM framework. The focus on health system outcomes demonstrates policy commitment to effective integration of health services. However, there remain considerable challenges to successful implementation. An outcomes framework makes it challenging to attribute changes in outcomes to organisational and collaborative strategies. At the local level, the strength and functioning of collaborative relationships between organisations vary considerably. The extent and pace of change may also be constrained by existing funding arrangements in the health system. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Considerations Regarding Students’ Social Protection

Directory of Open Access Journals (Sweden)

Iuliana Cenar

2016-01-01

Full Text Available The paper entitled “Considerations Regarding Students’ Social Protection” addresses the main forms of support offered to students and their families, divided in relation to the aim pursued, which may be relate to stimulating students’ performance and discipline, material and financial support (social assistance, supplementing family income. For these components there were taken into account: the circumstances in which it acquires to status of beneficiary, evolutionary dimensions in terms of beneficiary numbers, the amounts awarded, the need to ensure the complementarities with the informal side of social protection.

Consideration of Cosmetic Surgery As Part of Women's Benefit-Provisioning Mate Retention Strategy.

Science.gov (United States)

Atari, Mohammad; Barbaro, Nicole; Sela, Yael; Shackelford, Todd K; Chegeni, Razieh

2017-01-01

Individuals perform mate retention behaviors to minimize the risk of partner infidelity and relationship dissolution. The current study investigates whether consideration of cosmetic surgery can be conceptualized as part of a broader strategy of mate retention for women, but not men. We hypothesized that women's consideration of cosmetic surgery would be positively associated with performance frequencies of Benefit-Provisioning and Cost-Inflicting mate retention behaviors. We recruited 203 individuals (54% women) in committed heterosexual relationships from Tehran, Iran. Results indicate a positive association between consideration of cosmetic surgery and Benefit-Provisioning mate retention behaviors for women, but not men. There was no association between consideration of cosmetic surgery and Cost-Inflicting mate retention behaviors. Women therefore may consider cosmetic surgery to improve their physical attractiveness as part of a Benefit-Provisioning strategy to retain a long-term mate. We discuss limitations of the study and highlight future directions for research from an evolutionary perspective.

Control of Linear Parameter Varying Systems with Applications

CERN Document Server

Mohammadpour, Javad

2012-01-01

Control of Linear Parameter Varying Systems with Applications compiles state-of-the-art contributions on novel analytical and computational methods to address system modeling and identification, complexity reduction, performance analysis and control design for time-varying and nonlinear systems in the LPV framework. The book has an interdisciplinary character by emphasizing techniques that can be commonly applied in various engineering fields. It also includes a rich collection of illustrative applications in diverse domains to substantiate the effectiveness of the design methodologies and provide pointers to open research directions. The book is divided into three parts. The first part collects chapters of a more tutorial character on the background of LPV systems modeling and control. The second part gathers chapters devoted to the theoretical advancement of LPV analysis and synthesis methods to cope with the design constraints such as uncertainties and time delay. The third part of the volume showcases con...

Conceptual design considerations and neutronics of lithium fall laser target chambers

International Nuclear Information System (INIS)

Meier, W.R.; Thomson, W.B.

1978-01-01

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage

Human engineering considerations in the design of New Virginia Power Radwaste facilities

International Nuclear Information System (INIS)

Bankley, A.V.; Morris, L.L.; Lippard, D.W.

1988-01-01

Human engineering principles were considered by Virginia Power in the recent design of new radwaste facilities (NRFs) for both the Surry and North Anna power stations. Virginia Power recognized that the rigorous application of human engineering principles to the NRF design was essential to the ultimate success or failure of the facilities. Success of the NRF should not only be measured in the volume of radwaste processed but also by other factors such as (a) availability and maintainability of preferred equipment, (b) as-low-as-reasonably-achievable considerations, (c) actual release rates versus achievable release rates, and (d) flexibility to deal with varying circumstances. Each of these success criteria would suffer as the result of operator/human inefficiencies or error. Therefore, human engineering should be applied to the maximum practical extent to minimize such inefficiencies or errors. No method is ever going to ensure a perfectly human-engineered facility design. Virginia Power believes, however, that significant strides have been made in efforts to design and construct a successful radwaste processing facility, a facility where operating success rests with the ability of the human operators to perform their jobs in an efficient and reliable fashion

Technical considerations for designing low-cost, long-wave infrared objectives

Science.gov (United States)

Desroches, Gerard; Dalzell, Kristy; Robitaille, Blaise

2014-06-01

With the growth of uncooled infrared imaging in the consumer market, the balance between cost implications and performance criteria in the objective lens must be examined carefully. The increased availability of consumer-grade, long-wave infrared cameras is related to a decrease in military usage but it is also due to the decreasing costs of the cameras themselves. This has also driven up demand for low-cost, long-wave objectives that can resolve smaller pixels while maintaining high performance. Smaller pixels are traditionally associated with high cost objectives because of higher resolution requirements but, with careful consideration of all the requirements and proper selection of materials, costs can be moderated. This paper examines the cost/performance trade-off implications associated with optical and mechanical requirements of long-wave infrared objectives. Optical performance, f-number, field of view, distortion, focus range and thermal range all affect the cost of the objective. Because raw lens material cost is often the most expensive item in the construction, selection of the material as well as the shape of the lens while maintaining acceptable performance and cost targets were explored. As a result of these considerations, a low-cost, lightweight, well-performing objective was successfully designed, manufactured and tested.

Holographic cinematography of time-varying reflecting and time-varying phase objects using a Nd:YAG laser

Science.gov (United States)

Decker, A. J.

1982-01-01

The use of a Nd:YAG laser to record holographic motion pictures of time-varying reflecting objects and time-varying phase objects is discussed. Sample frames from both types of holographic motion pictures are presented. The holographic system discussed is intended for three-dimensional flow visualization of the time-varying flows that occur in jet-engine components.

Nanotechnological inventions considerably improve performance characteristics

Directory of Open Access Journals (Sweden)

VLASOV Vladimir Alexeevich

2014-06-01

Full Text Available The invention «The method of production of carbon nanomaterial (RU 2509053» can be used as an additive for concretes and polymers which significantly improves their performance characteristics. The method of production of carbon nanomaterial consists of the following stages: preliminary preparation of sphagnous moss when it is refined from foreign admixtures, dried up to 10% humidity and ground, then ground material is exposed to pyrolysis under the temperature 850–950оC for 1–2 hours and cooled up to the environment temperature. After that amorphous carbon obtained in pyrolysis is treated with mechanical activation in the variable planetary mill for 7–10 hours. The invention makes it possible to provide increased outcome of nanotubes with high cleanliness. The invention «The method of production of nanodispersed metal powders and alloys of them (RU 2509626» relates to the powder metallurgy. Powder metal chloride or powder mixture at least of two metal chlorides is treated in the environment of the water steam which is supplied in reaction space at the rate of 50–100 ml/min at the temperature 400–800оC at the presence of absorbent carbon or introducing carbon oxide (II obtained during dissolution of formic acid HCOOH. The invention provides reliable production of nanodispersed metal powders and alloys of them from 3-d metal range: Ni, Co, Cu, Fe, Zn which can be used in powder metallurgy to improve baking process, in chemical industry as the fillers of polymers and reaction catalysts; as additives to anticorrosive covers, etc.

Transistor design considerations for low-noise preamplifiers

International Nuclear Information System (INIS)

Fair, R.B.

1976-01-01

A review is presented of design considerations for GaAs Schottky-barrier FETs and other types of transistors in low-noise amplifiers for capacitive sources which are used in nuclear radiation detectors and high speed fiber-optic communication systems. Ultimate limits on performance are evaluated in terms of the g/sub m//C/sub i/ ratio and the gate leakage current to minimize the noise sources. Si bipolar transistors and the future prospects of GaAs, Si and InAs MISFETs are discussed, and performance is compared to FETs currently being used in low-noise preamplifiers

Engineering and Fabrication Considerations for Cost-Effective Space Reactor Shield Development

International Nuclear Information System (INIS)

Berg, Thomas A.; Disney, Richard K.

2004-01-01

Investment in developing nuclear power for space missions cannot be made on the basis of a single mission. Current efforts in the design and fabrication of the reactor module, including the reactor shield, must be cost-effective and take into account scalability and fabricability for planned and future missions. Engineering considerations for the shield need to accommodate passive thermal management, varying radiation levels and effects, and structural/mechanical issues. Considering these challenges, design principles and cost drivers specific to the engineering and fabrication of the reactor shield are presented that contribute to lower recurring mission costs

Performance Management or Performance Based Management?

OpenAIRE

Cristina PROTOPOPESCU

2013-01-01

In this paper we present some considerations about performance and performance management. Starting with the challenge of defining the performance concept, we intend to establish if „performance management” can be a new management system or it is just a sophisticated term for a HR strategy in order to improve the performance of teams and individuals. We also try to discuss the conection between performance management and management by objectives. Whether or not it is exageratted to talk about...

Applicability of common stomatal conductance models in maize under varying soil moisture conditions.

Science.gov (United States)

Wang, Qiuling; He, Qijin; Zhou, Guangsheng

2018-07-01

In the context of climate warming, the varying soil moisture caused by precipitation pattern change will affect the applicability of stomatal conductance models, thereby affecting the simulation accuracy of carbon-nitrogen-water cycles in ecosystems. We studied the applicability of four common stomatal conductance models including Jarvis, Ball-Woodrow-Berry (BWB), Ball-Berry-Leuning (BBL) and unified stomatal optimization (USO) models based on summer maize leaf gas exchange data from a soil moisture consecutive decrease manipulation experiment. The results showed that the USO model performed best, followed by the BBL model, BWB model, and the Jarvis model performed worst under varying soil moisture conditions. The effects of soil moisture made a difference in the relative performance among the models. By introducing a water response function, the performance of the Jarvis, BWB, and USO models improved, which decreased the normalized root mean square error (NRMSE) by 15.7%, 16.6% and 3.9%, respectively; however, the performance of the BBL model was negative, which increased the NRMSE by 5.3%. It was observed that the models of Jarvis, BWB, BBL and USO were applicable within different ranges of soil relative water content (i.e., 55%-65%, 56%-67%, 37%-79% and 37%-95%, respectively) based on the 95% confidence limits. Moreover, introducing a water response function, the applicability of the Jarvis and BWB models improved. The USO model performed best with or without introducing the water response function and was applicable under varying soil moisture conditions. Our results provide a basis for selecting appropriate stomatal conductance models under drought conditions. Copyright © 2018 Elsevier B.V. All rights reserved.

Effect of Varying Controller Parameters on the Performance of a ...

African Journals Online (AJOL)

This paper presents the results of computer simulation studies designed to isolate the effects of the major parameters of a fuzzy logic controller namely the range of the universe of discourse, the extent of overlap of the fuzzy sets, the rules in the rule base and the modes of the output fuzzy sets on the performance of a fuzzy ...

Sensitivity of CO2 storage performance to varying rates and dynamic injectivity in the Bunter Sandstone, UK

Science.gov (United States)

Kolster, C.; Mac Dowell, N.; Krevor, S. C.; Agada, S.

2016-12-01

Carbon capture and storage (CCS) is needed for meeting legally binding greenhouse gas emissions targets in the UK (ECCC 2016). Energy systems models have been key to identifying the importance of CCS but they tend to impose few constraints on the availability and use of geologic CO2 storage reservoirs. Our aim is to develop simple models that use dynamic representations of limits on CO2 storage resources. This will allow for a first order representation of the storage reservoir for use in systems models with CCS. We use the ECLIPSE reservoir simulator and a model of the Southern North Sea Bunter Sandstone saline aquifer. We analyse reservoir performance sensitivities to scenarios of varying CO2 injection demand for a future UK low carbon energy market. With 12 injection sites, we compare the impact of injecting at a constant 2MtCO2/year per site and varying this rate by a factor of 1.8 and 0.2 cyclically every 5 and 2.5 years over 50 years of injection. The results show a maximum difference in average reservoir pressure of 3% amongst each case and a similar variation in plume migration extent. This suggests that simplified models can maintain accuracy by using average rates of injection over similar time periods. Meanwhile, by initiating injection at rates limited by pressurization at the wellhead we find that injectivity steadily increases. As a result, dynamic capacity increases. We find that instead of injecting into sites on a need basis, we can strategically inject the CO2 into 6 of the deepest sites increasing injectivity for the first 15 years by 13%. Our results show injectivity as highly dependent on reservoir heterogeneity near the injection site. Injecting 1MTCO2/year into a shallow, low permeability and porosity site instead of into a deep injection site with high permeability and porosity reduces injectivity in the first 5 years by 52%. ECCC. 2016. Future of Carbon Capture and Storage in the UK. UK Parliament House of Commons, Energy and Climate Change

Commercial considerations in tissue engineering.

Science.gov (United States)

Mansbridge, Jonathan

2006-10-01

Tissue engineering is a field with immense promise. Using the example of an early tissue-engineered skin implant, Dermagraft, factors involved in the successful commercial development of devices of this type are explored. Tissue engineering has to strike a balance between tissue culture, which is a resource-intensive activity, and business considerations that are concerned with minimizing cost and maximizing customer convenience. Bioreactor design takes place in a highly regulated environment, so factors to be incorporated into the concept include not only tissue culture considerations but also matters related to asepsis, scaleup, automation and ease of use by the final customer. Dermagraft is an allogeneic tissue. Stasis preservation, in this case cryopreservation, is essential in allogeneic tissue engineering, allowing sterility testing, inventory control and, in the case of Dermagraft, a cellular stress that may be important for hormesis following implantation. Although the use of allogeneic cells provides advantages in manufacturing under suitable conditions, it raises the spectre of immunological rejection. Such rejection has not been experienced with Dermagraft. Possible reasons for this and the vision of further application of allogeneic tissues are important considerations in future tissue-engineered cellular devices. This review illustrates approaches that indicate some of the criteria that may provide a basis for further developments. Marketing is a further requirement for success, which entails understanding of the mechanism of action of the procedure, and is illustrated for Dermagraft. The success of a tissue-engineered product is dependent on many interacting operations, some discussed here, each of which must be performed simultaneously and well.

Extending Vulnerability Assessment to Include Life Stages Considerations.

Science.gov (United States)

Hodgson, Emma E; Essington, Timothy E; Kaplan, Isaac C

2016-01-01

Species are experiencing a suite of novel stressors from anthropogenic activities that have impacts at multiple scales. Vulnerability assessment is one tool to evaluate the likely impacts that these stressors pose to species so that high-vulnerability cases can be identified and prioritized for monitoring, protection, or mitigation. Commonly used semi-quantitative methods lack a framework to explicitly account for differences in exposure to stressors and organism responses across life stages. Here we propose a modification to commonly used spatial vulnerability assessment methods that includes such an approach, using ocean acidification in the California Current as an illustrative case study. Life stage considerations were included by assessing vulnerability of each life stage to ocean acidification and were used to estimate population vulnerability in two ways. We set population vulnerability equal to: (1) the maximum stage vulnerability and (2) a weighted mean across all stages, with weights calculated using Lefkovitch matrix models. Vulnerability was found to vary across life stages for the six species explored in this case study: two krill-Euphausia pacifica and Thysanoessa spinifera, pteropod-Limacina helicina, pink shrimp-Pandalus jordani, Dungeness crab-Metacarcinus magister and Pacific hake-Merluccius productus. The maximum vulnerability estimates ranged from larval to subadult and adult stages with no consistent stage having maximum vulnerability across species. Similarly, integrated vulnerability metrics varied greatly across species. A comparison showed that some species had vulnerabilities that were similar between the two metrics, while other species' vulnerabilities varied substantially between the two metrics. These differences primarily resulted from cases where the most vulnerable stage had a low relative weight. We compare these methods and explore circumstances where each method may be appropriate.

Quality assurance of Vari-source high dose rate (HDR) brachytherapy- remote after loader and cost effectiveness of Vari-source HDR- brachytherapy: NORI, Islamabad experience

International Nuclear Information System (INIS)

Ahmad, N.; Mahmood, H.; Jafri, S.R.A.

2004-01-01

A quality control of Vari-Source high dose rate (HDR) remote after loading brachytherapy machine was carried out and the cost effectiveness of HDR brachytherapy machine was also evaluated considering the cost of ten Iridium-192 wire sources at Nuclear Medicine, Oncology and Radiotherapy Institute (NORI), Islamabad, Pakistan. A total number of 253 intracavitary insertions were done in 98 patients from October 1996 to May 2001. The results of the quality control tests performed during 1996 to 2001 were within the acceptable limits. The cost effectiveness of Vari-Source HDR brachytherapy machine was also evaluated. The average cost per patient was calculated as US$ 491. Small number of patients was treated as the machine was used for gynecologic malignancies only. The objective was to assess the quality control status of HDR brachytherapy machine on patient treatment day, source exchange day and periodic day (monthly basis). It was found that the cost per patient can be minimized if other type of cancer patients are also treated on Vari-Source HDR machine. (author)

System design considerations for implementing performance and service tests on Class 1E batteries in accordance with IEEE 450-1980

International Nuclear Information System (INIS)

Pagan, E.J.; Weronick, R.

1982-01-01

Extensive electrical system design considerations are required to implement performance and service tests on Class 1E in accordance iwth IEEE 450-1980 ''Recommended Practice For Maintenance Testing and Replacement of Large Lead Storage Batteries For Generating Stations and Substations''. Class 1E is the safety classification of the electric equipment and systems that are essential to emergency reactor shutdown, cotainment isolation, reactor core cooling, and containment and reactor heat removal, or are otherwise essential to emergency reactor shutdown, containment isolation, reactor core cooling, and containment and reactor heat removal, or are otherwise essential in preventing significant release of radioactive material to the environment. The paper discusses alternatives which merit investigating to determine a feasible method for performing these tests at operating nuclear power plants, or plants nearing completion, which may lack provisions for incorporating such tests. The scope of each alternative presented includes a description and critique of the test circuit configuration and the auxiliary equipment required to isolate the battery and connect it to a Battery Capacity Tester (BCT). 6 refs

Design considerations for teleoperation systems operating in gas-tight argon cells

Directory of Open Access Journals (Sweden)

Seungnam Yu

2017-12-01

Full Text Available In the nuclear industry, mechanical engineers spend a significant portion of their time designing equipment such as manipulators, bogies, mechanical grippers, and so on. Some customized designs can be considered as standard mechanical equipment in this area, although it is not unusual to find that an existing design cannot simply be copied from one project to another. Varied performance requirements can dictate that redesign, often quite extensive redesign, is required. However, if something similar has been done before, engineers could use that as a starting point for the new project. In this regard, this study presents several guidelines inspired by previous design knowledge for similar development cases. Moreover, this study presents more detailed suggestions such as design guidelines for an argon-based hot cell atmosphere and design experience for a large-scale practical hot cell facility. Design considerations and case studies dealt with in this study are dedicated to teleoperation manipulators that are used at a large-scale argon cell facility for pyroprocess integrated inactive demonstration (PRIDE, at the Korea Atomic Energy Research Institute. In particular, for case studies to support the suggested recommendations, a fabricated telemanipulator system for PRIDE is introduced, and several kinds of experimental results associated with it are presented.

Daily fluctuations in positive affect positively co-vary with working memory performance.

Science.gov (United States)

Brose, Annette; Lövdén, Martin; Schmiedek, Florian

2014-02-01

Positive affect is related to cognitive performance in multiple ways. It is associated with motivational aspects of performance, affective states capture attention, and information processing modes are a function of affect. In this study, we examined whether these links are relevant within individuals across time when they experience minor ups and downs of positive affect and work on cognitive tasks in the laboratory on a day-to-day basis. Using a microlongitudinal design, 101 younger adults (20-31 years of age) worked on 3 working memory tasks on about 100 occasions. Every day, they also reported on their momentary affect and their motivation to work on the tasks. In 2 of the 3 tasks, performance was enhanced on days when positive affect was above average. This performance enhancement was also associated with more motivation. Importantly, increases in task performance on days with above-average positive affect were mainly unrelated to variations in negative affect. This study's results are in line with between-person findings suggesting that high levels of well-being are associated with successful outcomes. They imply that success on cognitively demanding tasks is more likely on days when feeling happier. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Relay selection in cooperative communication systems over continuous time-varying fading channel

Directory of Open Access Journals (Sweden)

Ke Geng

2017-02-01

Full Text Available In this paper, we study relay selection under outdated channel state information (CSI in a decode-and-forward (DF cooperative system. Unlike previous researches on cooperative communication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER of the cooperative system under continuous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.

Time-Varying Networks of Inter-Ictal Discharging Reveal Epileptogenic Zone.

Science.gov (United States)

Zhang, Luyan; Liang, Yi; Li, Fali; Sun, Hongbin; Peng, Wenjing; Du, Peishan; Si, Yajing; Song, Limeng; Yu, Liang; Xu, Peng

2017-01-01

The neuronal synchronous discharging may cause an epileptic seizure. Currently, most of the studies conducted to investigate the mechanism of epilepsy are based on EEGs or functional magnetic resonance imaging (fMRI) recorded during the ictal discharging or the resting-state, and few studies have probed into the dynamic patterns during the inter-ictal discharging that are much easier to record in clinical applications. Here, we propose a time-varying network analysis based on adaptive directed transfer function to uncover the dynamic brain network patterns during the inter-ictal discharging. In addition, an algorithm based on the time-varying outflow of information derived from the network analysis is developed to detect the epileptogenic zone. The analysis performed revealed the time-varying network patterns during different stages of inter-ictal discharging; the epileptogenic zone was activated prior to the discharge onset then worked as the source to propagate the activity to other brain regions. Consistence between the epileptogenic zones detected by our proposed approach and the actual epileptogenic zones proved that time-varying network analysis could not only reveal the underlying neural mechanism of epilepsy, but also function as a useful tool in detecting the epileptogenic zone based on the EEGs in the inter-ictal discharging.

Ethical, Legal, and Clinical Considerations when Disclosing a High-Risk Syndrome for Psychosis.

Science.gov (United States)

Mittal, Vijay A; Dean, Derek J; Mittal, Jyoti; Saks, Elyn R

2015-10-01

There are complex considerations when planning to disclose an attenuated psychosis syndrome (APS) diagnosis. In this review, we evaluate ethical, legal, and clinical perspectives as well as caveats related to full, non- and partial disclosure strategies, discuss societal implications, and provide clinical suggestions. Each of the disclosure strategies is associated with benefits as well as costs/considerations. Full disclosure promotes autonomy, allows for the clearest psychoeducation about additional risk factors, helps to clarify and/or correct previous diagnoses/treatments, facilitates early intervention and bolsters communication between providers but there are important considerations involving heritability, comorbidity, culture, and stigma. Non-disclosure advances nonmaleficence by limiting stigma and stress (which may inadvertently exacerbate the condition), and confusion (related to the rapidly evolving diagnosis) in a sensitive developmental period but is complicated by varying patient preferences and the possibility that, as new treatments without adverse effects become available, the risk with false positives no longer justifies the accompanying loss of autonomy. Partial disclosure balances ethical considerations by focusing on symptoms instead of labels, but evidence that laypersons may interpret this information as a pseudo-diagnosis and that symptoms alone also contribute to stigma limits the efficacy of this approach. In addition, there are notable societal considerations relating to disclosure involving conservatorship, the reach of insurance companies, and discrimination. We advocate a hybrid approach to disclosure and recommend future research aimed at understanding the effects of stigma on clinical course and a renewed focus on those help-seeking cases that do not transition but remain clinically relevant. © 2015 John Wiley & Sons Ltd.

Considerations in the application of the electronic dosimeter to dose of record

International Nuclear Information System (INIS)

Swinth, K.L.

1997-12-01

This report describes considerations for application of the electronic dosimeter (ED) as a measurement device for the dose of record (primary dosimetry). EDs are widely used for secondary dosimetry and advances in their reliability and capabilities have resulted in interest in their use to meet the needs of both primary and secondary dosimetry. However, the ED is an active device and more complex than the thermoluminescent and film dosimeters now in use for primary dosimetry. The user must evaluate the ED in terms of reliability, serviceability and radiations detected its intended application(s). If an ED is selected for primary dosimetry, the user must establish methods both for controlling the performance of the ED to ensure long term reliability of the measurements and for their proper use as a primary dosimeter. Regulatory groups may also want to develop methods to ensure adequate performance of the ED for dose of record. The purpose of the report is to provide an overview of considerations in the use of the ED for primary dosimetry. Considerations include recognizing current limitations, type testing of EDs, testing by the user, approval performance testing, calibration, and procedures to integrate the dosimeter into the users program

Considerations regarding dosimetry in children

International Nuclear Information System (INIS)

Gilday, D.L.

1986-01-01

The most important consideration when deciding whether or not to perform a nuclear medicine procedure in a child is whether the benefit of the information obtained exceeds the potential risk. In most circumstances the potential benefits are well define. No patient should be studied unless the question to be answered is clearly understood and there is a reasonable change to answer it. To properly perform procedures in children one must not only have a schedule to scale the radiopharmaceutical dose to be administered to the child's body surface area but also one must have an established minimum dose for small babies and infants. There is no point in under-dosing the patient as then the information will not be obtained from the nuclear medicine society. The value of nuclear medicine in the pediatric population cannot be underestimated. It is often the single most important test that can be performed diagnostically. For these reasons it is very important to understand the proper relationship of an adequate study versus the minimization of radiation. 3 references

Consideration of Cosmetic Surgery As Part of Women’s Benefit-Provisioning Mate Retention Strategy

Directory of Open Access Journals (Sweden)

Mohammad Atari

2017-08-01

Full Text Available Individuals perform mate retention behaviors to minimize the risk of partner infidelity and relationship dissolution. The current study investigates whether consideration of cosmetic surgery can be conceptualized as part of a broader strategy of mate retention for women, but not men. We hypothesized that women’s consideration of cosmetic surgery would be positively associated with performance frequencies of Benefit-Provisioning and Cost-Inflicting mate retention behaviors. We recruited 203 individuals (54% women in committed heterosexual relationships from Tehran, Iran. Results indicate a positive association between consideration of cosmetic surgery and Benefit-Provisioning mate retention behaviors for women, but not men. There was no association between consideration of cosmetic surgery and Cost-Inflicting mate retention behaviors. Women therefore may consider cosmetic surgery to improve their physical attractiveness as part of a Benefit-Provisioning strategy to retain a long-term mate. We discuss limitations of the study and highlight future directions for research from an evolutionary perspective.

Consideration of Cosmetic Surgery As Part of Women’s Benefit-Provisioning Mate Retention Strategy

Science.gov (United States)

Atari, Mohammad; Barbaro, Nicole; Sela, Yael; Shackelford, Todd K.; Chegeni, Razieh

2017-01-01

Individuals perform mate retention behaviors to minimize the risk of partner infidelity and relationship dissolution. The current study investigates whether consideration of cosmetic surgery can be conceptualized as part of a broader strategy of mate retention for women, but not men. We hypothesized that women’s consideration of cosmetic surgery would be positively associated with performance frequencies of Benefit-Provisioning and Cost-Inflicting mate retention behaviors. We recruited 203 individuals (54% women) in committed heterosexual relationships from Tehran, Iran. Results indicate a positive association between consideration of cosmetic surgery and Benefit-Provisioning mate retention behaviors for women, but not men. There was no association between consideration of cosmetic surgery and Cost-Inflicting mate retention behaviors. Women therefore may consider cosmetic surgery to improve their physical attractiveness as part of a Benefit-Provisioning strategy to retain a long-term mate. We discuss limitations of the study and highlight future directions for research from an evolutionary perspective. PMID:28855884

Statistical considerations of graphite strength for assessing design allowable stresses

International Nuclear Information System (INIS)

Ishihara, M.; Mogi, H.; Ioka, I.; Arai, T.; Oku, T.

1987-01-01

Several aspects of statistics need to be considered to determine design allowable stresses for graphite structures. These include: 1) Statistical variation of graphite material strength. 2) Uncertainty of calculated stress. 3) Reliability (survival probability) required from operational and safety performance of graphite structures. This paper deals with some statistical considerations of structural graphite for assessing design allowable stress. Firstly, probability distribution functions of tensile and compressive strengths are investigated on experimental Very High Temperature candidated graphites. Normal, logarithmic normal and Weibull distribution functions are compared in terms of coefficient of correlation to measured strength data. This leads to the adaptation of normal distribution function. Then, the relation between factor of safety and fracture probability is discussed on the following items: 1) As the graphite strength is more variable than metalic material's strength, the effect of strength variation to the fracture probability is evaluated. 2) Fracture probability depending on survival probability of 99 ∼ 99.9 (%) with confidence level of 90 ∼ 95 (%) is discussed. 3) As the material properties used in the design analysis are usually the mean values of their variation, the additional effect of these variations on the fracture probability is discussed. Finally, the way to assure the minimum ultimate strength with required survival probability with confidence level is discussed in view of statistical treatment of the strength data from varying sample numbers in a material acceptance test. (author)

Early Speech Motor Development: Cognitive and Linguistic Considerations

Science.gov (United States)

Nip, Ignatius S. B.; Green, Jordan R.; Marx, David B.

2009-01-01

This longitudinal investigation examines developmental changes in orofacial movements occurring during the early stages of communication development. The goals were to identify developmental trends in early speech motor performance and to determine how these trends differ across orofacial behaviors thought to vary in cognitive and linguistic…

Performance of supercritical Brayton cycle using CO2-based binary mixture at varying critical points for SFR applications

International Nuclear Information System (INIS)

Jeong, Woo Seok; Jeong, Yong Hoon

2013-01-01

Highlights: • Supercritical CO 2 -based gas mixture Brayton cycles were investigated for a SFR. • The critical point of CO 2 is the lowest cycle operating limit of the S-CO 2 cycles. • Mixing additives with CO 2 changes the CO 2 critical point. • CO 2 –Xe and CO 2 –Kr cycles achieve higher cycle efficiencies than the S-CO 2 cycles. • CO 2 –H 2 S and CO 2 –cyclohexane cycles perform better at higher heat sink temperatures. -- Abstract: The supercritical carbon dioxide Brayton cycle (S-CO 2 cycle) has attracted much attention as an alternative to the Rankine cycle for sodium-cooled fast reactors (SFRs). The higher cycle efficiency of the S-CO 2 cycle results from the considerably decreased compressor work because the compressor behaves as a pump in the proximity of the CO 2 vapor–liquid critical point. In order to fully utilize this feature, the main compressor inlet condition should be controlled to be close to the critical point of CO 2 . This indicates that the critical point of CO 2 is a constraint on the minimum cycle condition for S-CO 2 cycles. Modifying the CO 2 critical point by mixing additive gases could be considered as a method of enhancing the performance and broadening the applicability of the S-CO 2 cycle. Due to the drastic fluctuations of the thermo-physical properties of fluids near the critical point, an in-house cycle analysis code using the NIST REFPROP database was implemented. Several gases were selected as potential additives considering their thermal stability and chemical interaction with sodium in the temperature range of interest and the availability of the mixture property database: xenon, krypton, hydrogen sulfide, and cyclohexane. The performances of the optimized CO 2 -containing binary mixture cycles with simple recuperated and recompression layouts were compared with the reference S-CO 2 , CO 2 –Ar, CO 2 –N 2 , and CO 2 –O 2 cycles. For the decreased critical temperatures, the CO 2 –Xe and CO 2 �

DOE handbook: Design considerations

International Nuclear Information System (INIS)

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

DOE handbook: Design considerations

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

Neuroanatomical correlates of brain-computer interface performance.

Science.gov (United States)

Kasahara, Kazumi; DaSalla, Charles Sayo; Honda, Manabu; Hanakawa, Takashi

2015-04-15

Brain-computer interfaces (BCIs) offer a potential means to replace or restore lost motor function. However, BCI performance varies considerably between users, the reasons for which are poorly understood. Here we investigated the relationship between sensorimotor rhythm (SMR)-based BCI performance and brain structure. Participants were instructed to control a computer cursor using right- and left-hand motor imagery, which primarily modulated their left- and right-hemispheric SMR powers, respectively. Although most participants were able to control the BCI with success rates significantly above chance level even at the first encounter, they also showed substantial inter-individual variability in BCI success rate. Participants also underwent T1-weighted three-dimensional structural magnetic resonance imaging (MRI). The MRI data were subjected to voxel-based morphometry using BCI success rate as an independent variable. We found that BCI performance correlated with gray matter volume of the supplementary motor area, supplementary somatosensory area, and dorsal premotor cortex. We suggest that SMR-based BCI performance is associated with development of non-primary somatosensory and motor areas. Advancing our understanding of BCI performance in relation to its neuroanatomical correlates may lead to better customization of BCIs based on individual brain structure. Copyright © 2015 Elsevier Inc. All rights reserved.

A Tentative Application Of Morphological Filters To Time-Varying Images

Science.gov (United States)

Billard, D.; Poquillon, B.

1989-03-01

In this paper, morphological filters, which are commonly used to process either 2D or multidimensional static images, are generalized to the analysis of time-varying image sequence. The introduction of the time dimension induces then interesting prop-erties when designing such spatio-temporal morphological filters. In particular, the specification of spatio-temporal structuring ele-ments (equivalent to time-varying spatial structuring elements) can be adjusted according to the temporal variations of the image sequences to be processed : this allows to derive specific morphological transforms to perform noise filtering or moving objects discrimination on dynamic images viewed by a non-stationary sensor. First, a brief introduction to the basic principles underlying morphological filters will be given. Then, a straightforward gener-alization of these principles to time-varying images will be pro-posed. This will lead us to define spatio-temporal opening and closing and to introduce some of their possible applications to process dynamic images. At last, preliminary results obtained us-ing a natural forward looking infrared (FUR) image sequence are presented.

Assessment of Motor Control during Three-Dimensional Movements Tracking with Position-Varying Gravity Compensation

Directory of Open Access Journals (Sweden)

Yao Huang

2017-05-01

Full Text Available Active movements are important in the rehabilitation training for patients with neurological motor disorders, while weight of upper limb impedes movements due to muscles weakness. The objective of this study is to develop a position-varying gravity compensation strategy for a cable-based rehabilitation robot. The control strategy can estimate real-time gravity torque according to position feedback. Then, the performance of this control strategy was compared with the other two kinds of gravity compensation strategies (i.e., without compensation and with fixed compensation during movements tracking. Seven healthy subjects were invited to conduct tracking tasks along four different directions (i.e., upward, forward, leftward, and rightward. The performance of movements with different compensation strategies was compared in terms of root mean square error (RMSE between target and actual moving trajectories, normalized jerk score (NJS, mean velocity ratio (MVR of main motion direction, and the activation of six muscles. The results showed that there were significant effects in control strategies in all four directions with the RMSE and NJS values in the following order: without compensation > fixed compensation > position-varying compensation and MVR values in the following order: without compensation < fixed compensation < position-varying compensation (p < 0.05. Comparing with movements without compensation in all four directions, the activation of muscles during movements with position-varying compensation showed significant reductions, except the activations of triceps and in forward and leftward movements, the activations of upper trapezius and middle parts of deltoid in upward movements and the activations of posterior parts of deltoid in all four directions (p < 0.05. Therefore, with position-varying gravity compensation, the upper limb cable-based rehabilitation robotic system might assist subjects to perform movements with higher quality and

A varying-α brane world cosmology

International Nuclear Information System (INIS)

Youm, Donam

2001-08-01

We study the brane world cosmology in the RS2 model where the electric charge varies with time in the manner described by the varying fine-structure constant theory of Bekenstein. We map such varying electric charge cosmology to the dual variable-speed-of-light cosmology by changing system of units. We comment on cosmological implications for such cosmological models. (author)

Seismic Responses of a Cable-Stayed Bridge with Consideration of Uniform Temperature Load

Directory of Open Access Journals (Sweden)

Junjun Guo

2016-12-01

Full Text Available The effects of temperature load on the dynamic responses of cable-stayed bridges have attracted the attention of researchers in recent years. However, these investigations mainly focus on the influence of temperature on the dynamic characteristics of structures, such as vibration mode and frequency. This paper discusses the effects of uniform temperature changes on the seismic responses of a cable-stayed bridge. A three dimensional finite element model of a cable-stayed bridge using OpenSees is established for nonlinear time history analysis, and uniform temperature load is applied to the prototype bridge before the conducting of seismic excitation. Three ground motion records are selected from the PEER strong motion database based on the design spectrum. Case studies are then performed considering the varying temperature and the connections between the deck and pylons of the bridge. The result shows that the seismic responses of the bridge are significantly increased with the consideration of temperature load. Meanwhile, the types between the deck and pylon also have notable impacts on the seismic responses of the bridge with and without temperature changes. This research could provide a reference for designers during the design phase of cable-stayed brides.

Conceptual design considerations and neutronics of lithium fall laser fusion target chambers

International Nuclear Information System (INIS)

Meier, W.R.; Thomson, W.B.

1978-01-01

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage

effect of gasket of varying thickness on spark ignition engines

African Journals Online (AJOL)

DJFLEX

In the study of Toyota, In-line, 4 cylinders, spark ignition engine using gaskets of varying thicknesses. (1.75mm, 3.5mm, 5.25mm, 7mm and 8.75mm) between the cylinder head and the engine block, the performance characteristics of the engine was investigated via the effect of engine speed on brake power, brake thermal ...

Lane-changing model with dynamic consideration of driver's propensity

Science.gov (United States)

Wang, Xiaoyuan; Wang, Jianqiang; Zhang, Jinglei; Ban, Xuegang Jeff

2015-07-01

Lane-changing is the driver's selection result of the satisfaction degree in different lane driving conditions. There are many different factors influencing lane-changing behavior, such as diversity, randomicity and difficulty of measurement. So it is hard to accurately reflect the uncertainty of drivers' lane-changing behavior. As a result, the research of lane-changing models is behind that of car-following models. Driver's propensity is her/his emotion state or the corresponding preference of a decision or action toward the real objective traffic situations under the influence of various dynamic factors. It represents the psychological characteristics of the driver in the process of vehicle operation and movement. It is an important factor to influence lane-changing. In this paper, dynamic recognition of driver's propensity is considered during simulation based on its time-varying discipline and the analysis of the driver's psycho-physic characteristics. The Analytic Hierarchy Process (AHP) method is used to quantify the hierarchy of driver's dynamic lane-changing decision-making process, especially the influence of the propensity. The model is validated using real data. Test results show that the developed lane-changing model with the dynamic consideration of a driver's time-varying propensity and the AHP method are feasible and with improved accuracy.

Edge Modeling by Two Blur Parameters in Varying Contrasts.

Science.gov (United States)

Seo, Suyoung

2018-06-01

This paper presents a method of modeling edge profiles with two blur parameters, and estimating and predicting those edge parameters with varying brightness combinations and camera-to-object distances (COD). First, the validity of the edge model is proven mathematically. Then, it is proven experimentally with edges from a set of images captured for specifically designed target sheets and with edges from natural images. Estimation of the two blur parameters for each observed edge profile is performed with a brute-force method to find parameters that produce global minimum errors. Then, using the estimated blur parameters, actual blur parameters of edges with arbitrary brightness combinations are predicted using a surface interpolation method (i.e., kriging). The predicted surfaces show that the two blur parameters of the proposed edge model depend on both dark-side edge brightness and light-side edge brightness following a certain global trend. This is similar across varying CODs. The proposed edge model is compared with a one-blur parameter edge model using experiments of the root mean squared error for fitting the edge models to each observed edge profile. The comparison results suggest that the proposed edge model has superiority over the one-blur parameter edge model in most cases where edges have varying brightness combinations.

Timed arrays wideband and time varying antenna arrays

CERN Document Server

Haupt, Randy L

2015-01-01

Introduces timed arrays and design approaches to meet the new high performance standards The author concentrates on any aspect of an antenna array that must be viewed from a time perspective. The first chapters briefly introduce antenna arrays and explain the difference between phased and timed arrays. Since timed arrays are designed for realistic time-varying signals and scenarios, the book also reviews wideband signals, baseband and passband RF signals, polarization and signal bandwidth. Other topics covered include time domain, mutual coupling, wideband elements, and dispersion. The auth

Discriminating individually considerate and authoritarian leaders by speech activity cues

OpenAIRE

Feese, Sebastian; Muaremi, Amir; Arnrich, Bert; Tröster, Gerhard; Meyer, Bertolt; Jonas, Klaus

2011-01-01

Effective leadership can increase team performance, however up to now the influence of specific micro-level behavioral patterns on team performance is unclear. At the same time, current behavior observation methods in social psychology mostly rely on manual video annotations that impede research. In our work, we follow a sensor-based approach to automatically extract speech activity cues to discriminate individualized considerate from authoritarian leadership. On a subset of 35 selected...

Large population center and core melt accident considerations in siting

International Nuclear Information System (INIS)

Camarinopoulos, L.; Yadigaroglu, G.

1983-01-01

The problem of providing suitable demographic siting criteria in the presence of a very large population center in an otherwise sparsely populated region is addressed. Simple calculations were performed making maximum use of pretabulated results of studies where core melt accidents are considered. These show that taking into consideration the air flow patterns in the region can lower the expected population doses from core melt accidents more effectively than distance alone. Expected doses are compared to the annual background radiation dose. A simple siting criterion combining geographical considerations with the probability of a release reaching the large population center is proposed

Simulating the dust effect on the energy performance of photovoltaic generators based on experimental measurements

International Nuclear Information System (INIS)

Kaldellis, J.K.; Kapsali, M.

2011-01-01

One of the least analyzed side effects of atmospheric air pollution is the degradation of PV-panels' performance due to the deposition of solid particles varying in composition, size and type. In the current study, the experimental data concerning the effect of three representative air pollutants (i.e. red soil, limestone and carbonaceous fly-ash particles) on the energy performance of PV installations are analyzed. According to the results obtained, a considerable reduction of PVs' energy performance is recorded, depending strongly on particles' composition and source. Subsequently, a theoretical model has been developed in order to be used as an analytical tool for obtaining reliable results concerning the expected effect of regional air pollution on PVs' performance. Furthermore, experimental results concerning the dust effect on PVs' energy yield in an aggravated - from air pollution - urban environment are used to validate the proposed theoretical model. -- Highlights: → The effect of dust deposition on PVs energy efficiency is experimentally examined. → Based on the results, a considerable reduction of PVs energy performance is recorded. → The effect strongly depends on the dust composition and on the type of the pollutant. → A theoretical model is developed for predicting the dust deposition effect on PVs energy yield. → The model is validated on the basis of experiments conducted in urban environment.

In-plant considerations for optimal offsite response to reactor accidents

International Nuclear Information System (INIS)

Burke, R.P.; Heising, C.D.; Aldrich, D.C.

1982-11-01

Offsite response decision-making methods based on in-plant conditions are developed for use during severe reactor-accident situations. Dose projections are used to eliminate all LWR plant systems except the reactor core and the spent-fuel storage pool from consideration for immediate offsite emergency response during accident situations. A simple plant information-management scheme is developed for use in offsite response decision-making. Detailed consequence calculations performed with the CRAC2 model are used to determine the appropriate timing of offsite-response implementation for a range of PWR accidents involving the reactor core. In-plant decision criteria for offsite-response implementation are defined. The definition of decision criteria is based on consideration of core-accident physical processes, in-plant accident monitoring information, and results of consequence calculations performed to determine the effectiveness of various public-protective measures. The benefits and negative aspects of the proposed response-implementation criteria are detailed

Considerations on the DEMO pellet fuelling system

Energy Technology Data Exchange (ETDEWEB)

Lang, P.T., E-mail: peter.lang@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Day, Ch. [Karlsruhe Institute of Technology, 76021 Karlsruhe (Germany); Fable, E. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Igitkhanov, Y. [Karlsruhe Institute of Technology, 76021 Karlsruhe (Germany); Köchl, F. [Association EURATOM-Ö AW/ATI, Atominstitut, TU Wien, 1020 Vienna (Austria); Mooney, R. [Culham Centre for Fusion Energy, Culham Science Centre, Oxfordshire OX14 3DB (United Kingdom); Pegourie, B. [CEA, IRFM, 13108 Saint-Paul-lez-Durance (France); Ploeckl, B. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Wenninger, R. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); EFDA, Garching (Germany); Zohm, H. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany)

2015-10-15

Graphical abstract: - Highlights: • Considerations are made for a core particle fuelling system covering all DEMO requirements. • Particle deposition beyond the pedestal top is needed to achieve efficient fuelling. • Conventional pellet technology enabling launching from the torus inboard side can be used. • Efforts have been taken for integrating a suitable pellet guiding system into the EU DEMO model. • In addition, further techniques bearing potential for advanced fuelling performance are considered. - Abstract: The Demonstration Fusion Power Reactor DEMO is the step foreseen to bridge the gap between ITER and the first commercial fusion power plant. One key element in the European work plan for DEMO is the elaboration of a conceptual design for a suitable core particle fuelling system. First considerations for such a system are presented in this contribution. Following the well-considered ITER solution, most analysis performed in this study assumes conventional pellet technology will be used for the fuelling system. However, taking advantage of the less compressed time frame for the DEMO project, several other techniques thought to bear potential for advanced fuelling performance are considered as well. In a first, basic analysis all actuation parameters at hand and their implications on the fuelling performance were considered. Tentative transport modeling of a reference scenario strongly indicates only particles deposited inside the plasma pedestal allow for efficient fuelling. Shallow edge fuelling results in an unbearable burden on the fuel cycle. Sufficiently deep particle deposition seems technically achievable, provided pellets are launched from the torus inboard at sufficient speed. All components required for a DEMO pellet system capable for high speed inboard pellet launch are already available or can be developed in due time with reasonable efforts. Furthermore, steps to integrate this solution into the EU DEMO model are taken.

Considerations on the DEMO pellet fuelling system

International Nuclear Information System (INIS)

Lang, P.T.; Day, Ch.; Fable, E.; Igitkhanov, Y.; Köchl, F.; Mooney, R.; Pegourie, B.; Ploeckl, B.; Wenninger, R.; Zohm, H.

2015-01-01

Graphical abstract: - Highlights: • Considerations are made for a core particle fuelling system covering all DEMO requirements. • Particle deposition beyond the pedestal top is needed to achieve efficient fuelling. • Conventional pellet technology enabling launching from the torus inboard side can be used. • Efforts have been taken for integrating a suitable pellet guiding system into the EU DEMO model. • In addition, further techniques bearing potential for advanced fuelling performance are considered. - Abstract: The Demonstration Fusion Power Reactor DEMO is the step foreseen to bridge the gap between ITER and the first commercial fusion power plant. One key element in the European work plan for DEMO is the elaboration of a conceptual design for a suitable core particle fuelling system. First considerations for such a system are presented in this contribution. Following the well-considered ITER solution, most analysis performed in this study assumes conventional pellet technology will be used for the fuelling system. However, taking advantage of the less compressed time frame for the DEMO project, several other techniques thought to bear potential for advanced fuelling performance are considered as well. In a first, basic analysis all actuation parameters at hand and their implications on the fuelling performance were considered. Tentative transport modeling of a reference scenario strongly indicates only particles deposited inside the plasma pedestal allow for efficient fuelling. Shallow edge fuelling results in an unbearable burden on the fuel cycle. Sufficiently deep particle deposition seems technically achievable, provided pellets are launched from the torus inboard at sufficient speed. All components required for a DEMO pellet system capable for high speed inboard pellet launch are already available or can be developed in due time with reasonable efforts. Furthermore, steps to integrate this solution into the EU DEMO model are taken.

Structural nested mean models for assessing time-varying effect moderation.

Science.gov (United States)

Almirall, Daniel; Ten Have, Thomas; Murphy, Susan A

2010-03-01

This article considers the problem of assessing causal effect moderation in longitudinal settings in which treatment (or exposure) is time varying and so are the covariates said to moderate its effect. Intermediate causal effects that describe time-varying causal effects of treatment conditional on past covariate history are introduced and considered as part of Robins' structural nested mean model. Two estimators of the intermediate causal effects, and their standard errors, are presented and discussed: The first is a proposed two-stage regression estimator. The second is Robins' G-estimator. The results of a small simulation study that begins to shed light on the small versus large sample performance of the estimators, and on the bias-variance trade-off between the two estimators are presented. The methodology is illustrated using longitudinal data from a depression study.

Analýza marketingové komunikace sportovního klubu BK Lokomotiva Karlovy Vary

OpenAIRE

Houdková, Jana

2012-01-01

ANALYSIS OF MARKETING COMMUNICATIONS BK LOKOMOTIVA KARLOVY VARY SPORTS CLUB Objectives: The aim of this work is to analyze the current state of marketing communication with the audience and sponsors for women's basketball club BK Lokomotiva Karlovy Vary and propose a strategy for improving marketing communications. Methods: In this thesis were performed using the methods of observation and personal interviews examined subjects Results: An analysis of marketing communication club, thanks to wh...

Wavelet ridge diagnosis of time-varying elliptical signals with application to an oceanic eddy

OpenAIRE

Lilly , J. M.; Gascard , Jean-Claude

2006-01-01

International audience; A method for diagnosing the physical properties of a time-varying ellipse is presented. This essentially involves extending the notion of instantaneous frequency to the bivariate case. New complications, and possibilities, arise from the fact that there are several meaningful forms in which a time-varying ellipse may be represented. A perturbation analysis valid for the near-circular case clarifies these issues. Diagnosis of the ellipse properties may then be performed...

The benefits of conducting factory performance tests for main mine fans

Energy Technology Data Exchange (ETDEWEB)

Ray, R.E.Jr. [PB Americas Inc., New York, NY (United States); Gamble, G.A. [Clarage Twin City Fan Co., Akron, OH (United States)

2010-07-01

Axial flow fans used in underground mining are also commonly used in subway tunnel ventilation fans to provide an evacuation path during a tunnel fire emergency. The axial flow fans provide sufficient air velocity to the fire site to prevent backlayering of smoke against the incoming airflow. Since the tunnels are used by the public, advance testing of fans and motors is conducted to confirm that the equipment will perform as specified during a fire. This paper discussed some of the advantages derived from conducting fan factory tests for tunnel projects that would also apply to mining applications. It also described other benefits from testing that are unique to mining. External factors that may cause the fan performance to vary considerably from the predicted performance measured at the factory were also discussed. These included air density changes and system effects produced by poorly designed shaft configurations and fan inlet ductwork. 11 refs., 6 figs.

H ∞ synchronization of the coronary artery system with input time-varying delay

International Nuclear Information System (INIS)

Li Xiao-Meng; Zhao Zhan-Shan; Sun Lian-Kun; Zhang Jing

2016-01-01

This paper investigates the H ∞ synchronization of the coronary artery system with input delay and disturbance. We focus on reducing the conservatism of existing synchronization strategies. Base on the triple integral forms of the Lyapunov–Krasovskii functional (LKF), we utilize single and double integral forms of Wirtinger-based inequality to guarantee that the synchronization feedback controller has good performance against time-varying delay and external disturbance. The effectiveness of our strategy can be exhibited by simulations under the different time-varying delays and different disturbances. (paper)

Measured Performance of a Varied Airflow Small-Diameter Duct System

Energy Technology Data Exchange (ETDEWEB)

Poerschke, Andrew [IBACOS, Inc., Pittsburgh, PA (United States)

2017-03-01

This study tests the performance of a variable airflow small-diameter duct heating, ventilation, and air conditioning (HVAC) system in a new construction unoccupied low-load test house in Pittsburgh, Pennsylvania. The duct system was installed entirely in conditioned space and was operated from the winter through summer seasons. Measurements were collected on the in-room temperatures and energy consumed by the air handler and heat pump unit. Operation modes with three different volumes of airflow were compared to determine the ideal airflow scenario that maximizes room-to-room thermal uniformity while minimizing fan energy consumption. Black felt infrared imagery was used as a measure of diffuser throw and in-room air mixing. Measured results indicate the small-diameter, high velocity airflow system can provide comfort under some conditions. Solar heat gains resulted in southern rooms drifting beyond acceptable temperature limits. Insufficient airflow to some bedrooms also resulted in periods of potential discomfort. Homebuilders or HVAC contractors can use these results to assess whether this space conditioning strategy is an attractive alternative to a traditional duct system. The team performed a cost analysis of two duct system configurations: (1) a conventional diameter and velocity duct system, and (2) the small-diameter duct system. This work applies to both new and retrofit homes that have achieved a low heating and cooling density either by energy conservation or by operation in a mild climate with few heating or cooling degree days. Guidance is provided on cost trade-offs between the conventional duct system and the small-diameter duct system.

Measured Performance of a Varied Airflow Small-Diameter Duct System

Energy Technology Data Exchange (ETDEWEB)

Poerschke, Andrew [IBACOS, Inc., Pittsburgh, PA (United States)

2017-03-16

This study tests the performance of a variable airflow small-diameter duct heating, ventilation, and air conditioning (HVAC) system in a new construction unoccupied low-load test house in Pittsburgh, Pennsylvania. The duct system was installed entirely in conditioned space and was operated from the winter through summer seasons. Measurements were collected on the in-room temperatures and energy consumed by the air handler and heat pump unit. Operation modes with three different volumes of airflow were compared to determine the ideal airflow scenario that maximizes room-to-room thermal uniformity while minimizing fan energy consumption. Black felt infrared imagery was used as a measure of diffuser throw and in-room air mixing. Measured results indicate the small-diameter, high velocity airflow system can provide comfort under some conditions. Solar heat gains resulted in southern rooms drifting beyond acceptable temperature limits. Insufficient airflow to some bedrooms also resulted in periods of potential discomfort. Homebuilders or HVAC contractors can use these results to assess whether this space conditioning strategy is an attractive alternative to a traditional duct system. The team performed a cost analysis of two duct system configurations: (1) a conventional diameter and velocity duct system, and (2) the small-diameter duct system. This work applies to both new and retrofit homes that have achieved a low heating and cooling density either by energy conservation or by operation in a mild climate with few heating or cooling degree days. Guidance is provided on cost trade-offs between the conventional duct system and the small-diameter duct system.

[Independence in Plastic Surgery - Benefit or Barrier? Analysis of the Publication Performance in Academic Plastic Surgery Depending on Varying Organisational Structures].

Science.gov (United States)

Schubert, C D; Leitsch, S; Haertnagl, F; Haas, E M; Giunta, R E

2015-08-01

Despite its recognition as an independent specialty, at German university hospitals the field of plastic surgery is still underrepresented in terms of independent departments with a dedicated research focus. The aim of this study was to analyse the publication performance within the German academic plastic surgery environment and to compare independent departments and dependent, subordinate organisational structures regarding their publication performance. Organisational structures and number of attending doctors in German university hospitals were examined via a website analysis. A pubmed analysis was applied to assess the publication performance (number of publications, cumulative impact factor, impact factor/publication, number of publications/MD, number of publications/unit) between 2009 and 2013. In a journal analysis the distribution of the cumulative impact factor and number of publications in different journals as well as the development of the impact factor in the top journals were analysed. Out of all 35 university hospitals there exist 12 independent departments for plastic surgery and 8 subordinate organisational structures. In 15 university hospitals there were no designated plastic surgery units. The number of attending doctors differed considerably between independent departments (3.6 attending doctors/unit) and subordinate organisational structures (1.1 attending doctors/unit). The majority of publications (89.0%) and of the cumulative impact factor (91.2%) as well as most of the publications/MD (54 publications/year) and publications/unit (61 publications/year) were created within the independent departments. Only in departments top publications with an impact factor > 5 were published. In general a negative trend regarding the number of publications (- 13.4%) and cumulative impact factor (- 28.9%) was observed. 58.4% of all publications were distributed over the top 10 journals. Within the latter the majority of articles were published in

Soil carbon varies between different organic and conventional management schemes in arable agriculture

DEFF Research Database (Denmark)

Hu, Teng; Sørensen, Peter; Olesen, Jørgen Eivind

2018-01-01

The effects of organic versus conventional farming systems on changes in soil organic carbon (SOC) has long been debated. The effects of such comparisons may depend considerably on the design of the respective systems and climate and soil conditions under which they are performed. Here, we compar...

State space modeling of time-varying contemporaneous and lagged relations in connectivity maps.

Science.gov (United States)

Molenaar, Peter C M; Beltz, Adriene M; Gates, Kathleen M; Wilson, Stephen J

2016-01-15

Most connectivity mapping techniques for neuroimaging data assume stationarity (i.e., network parameters are constant across time), but this assumption does not always hold true. The authors provide a description of a new approach for simultaneously detecting time-varying (or dynamic) contemporaneous and lagged relations in brain connectivity maps. Specifically, they use a novel raw data likelihood estimation technique (involving a second-order extended Kalman filter/smoother embedded in a nonlinear optimizer) to determine the variances of the random walks associated with state space model parameters and their autoregressive components. The authors illustrate their approach with simulated and blood oxygen level-dependent functional magnetic resonance imaging data from 30 daily cigarette smokers performing a verbal working memory task, focusing on seven regions of interest (ROIs). Twelve participants had dynamic directed functional connectivity maps: Eleven had one or more time-varying contemporaneous ROI state loadings, and one had a time-varying autoregressive parameter. Compared to smokers without dynamic maps, smokers with dynamic maps performed the task with greater accuracy. Thus, accurate detection of dynamic brain processes is meaningfully related to behavior in a clinical sample. Published by Elsevier Inc.

Growth Performance and Carcass Characteristics of Korean Native Ducks Fed Diets with Varying Levels of Limiting Amino Acids

Directory of Open Access Journals (Sweden)

Y. K. Choo

2014-04-01

Full Text Available There are multiple experiments conducted with male Korean native ducks (KND to evaluate the optimal levels of limiting amino acids (AA. In Exp. 1, a total of 450 one-d-old male KNDs were divided into five groups with six replicates and fed experimental diets with varying levels of lysine, total sulfur amino acids (TSAA and threonine (T1, 0.90/0.74/0.70%; T2, 1.00/0.82/0.77%; T3, 1.10/0.90/0.85%; T4, 1.20/0.98/0.93%; T5, 1.30/1.07/1.01% to 21 d of age. In Exp. 2, one-d-old male KND were received and fed commercial starter diet from hatching to 21 d of age, and then divided into five groups with six replicates and fed one of five diets varying levels of lysine, TSAA, and threonine (T1, 0.73/0.62/0.54%; T2, 0.80/0.68/0.60%; T3, 0.87/0.74/0.65%; T4, 0.94/0.80/0.70%; T5, 1.01/0.86/0.75% during 22 to 56 d of age, respectively. The BW gain was linearly increased as dietary limiting AA levels increased to 1.20% lysine, 0.98% TSAA and 0.93% threonine. There were no significant differences in feed intake, gain:feed and uniformity among groups. In Exp. 2, the BW gain and gain:feed were not affected by dietary limiting AA levels. There were no significant differences in carcass characteristics and meat quality among groups. The growth performance and carcass characteristics did not show the significant response to increasing dietary limiting AA levels in KND during 22 to 56 d of age. In conclusion, the levels of lysine, TSAA and threonine necessary to maximize growth for starter phase were at least 1.20%, 0.98%, and 0.93%, respectively. On the other hands, KND require relatively low levels of limiting AA for late growth and carcass yield. The dietary levels of 0.73% lysine, 0.62% TSAA and 0.54% threonine appear to be adequate during growing phase.

Performance Prediction and Validation: Data, Frameworks, and Considerations

Energy Technology Data Exchange (ETDEWEB)

Tinnesand, Heidi

2017-05-19

Improving the predictability and reliability of wind power generation and operations will reduce costs and potentially establish a framework to attract new capital into the distributed wind sector, a key cost reduction requirement highlighted in results from the distributed wind future market assessment conducted with dWind. Quantifying and refining the accuracy of project performance estimates will also directly address several of the key challenges identified by industry stakeholders in 2015 as part of the distributed wind resource assessment workshop and be cross-cutting for several other facets of the distributed wind portfolio. This presentation covers the efforts undertaken in 2016 to address these topics.

Performance on a Surgical In-Training Examination Varies by Training Year and Pathway.

Science.gov (United States)

Silvestre, Jason; Levin, L Scott; Serletti, Joseph M; Chang, Benjamin

2016-08-01

Few studies in surgery have addressed medical knowledge competency training as defined by the Accreditation Council for Graduate Medical Education. As in-training examinations are ubiquitous educational tools for surgical residents in the United States, insights into examination performance may help fill this void. The purpose of this study was to determine the relationship between In-Service Examination performance and training characteristics in plastic surgery. This retrospective cohort study reviewed performance data for the Plastic Surgery In-Service Training Examination for the years 2012 to 2015. Comparisons were made both within and between training pathways by means of Kruskal-Wallis and Mann-Whitney U tests. Data were available for 1367 independent (37.9 percent) and 2240 integrated residents (62.1 percent). Among integrated residents, performance increased with additional years of training (p 0.05). Similarly, independent resident examination performance increased by year of training (p 0.05). At each level of training (postgraduate years 4 to 6), integrated residents outperformed their independent resident colleagues (postgraduate years 1 to 3) (p < 0.001). Performance on the Plastic Surgery In-Service Training Examination increases during residency, with integrated residents outperforming independent residents. These findings may have implications for medical knowledge competency training as defined by the Accreditation Council for Graduate Medical Education.

46 CFR 114.550 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Special consideration. 114.550 Section 114.550 Shipping... consideration. In applying the provisions of this subchapter, the OCMI may give special consideration to... vessel operates must approve any special consideration granted to the vessel. ...

32 CFR 643.53 - Consideration.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Consideration. 643.53 Section 643.53 National... Leases § 643.53 Consideration. (a) Unless otherwise authorized by this regulation or directed by the SA, the consideration for a lease of real estate will be the appraised fair market rental value. However...

The Importance of Muscular Strength: Training Considerations.

Science.gov (United States)

Suchomel, Timothy J; Nimphius, Sophia; Bellon, Christopher R; Stone, Michael H

2018-04-01

This review covers underlying physiological characteristics and training considerations that may affect muscular strength including improving maximal force expression and time-limited force expression. Strength is underpinned by a combination of morphological and neural factors including muscle cross-sectional area and architecture, musculotendinous stiffness, motor unit recruitment, rate coding, motor unit synchronization, and neuromuscular inhibition. Although single- and multi-targeted block periodization models may produce the greatest strength-power benefits, concepts within each model must be considered within the limitations of the sport, athletes, and schedules. Bilateral training, eccentric training and accentuated eccentric loading, and variable resistance training may produce the greatest comprehensive strength adaptations. Bodyweight exercise, isolation exercises, plyometric exercise, unilateral exercise, and kettlebell training may be limited in their potential to improve maximal strength but are still relevant to strength development by challenging time-limited force expression and differentially challenging motor demands. Training to failure may not be necessary to improve maximum muscular strength and is likely not necessary for maximum gains in strength. Indeed, programming that combines heavy and light loads may improve strength and underpin other strength-power characteristics. Multiple sets appear to produce superior training benefits compared to single sets; however, an athlete's training status and the dose-response relationship must be considered. While 2- to 5-min interset rest intervals may produce the greatest strength-power benefits, rest interval length may vary based an athlete's training age, fiber type, and genetics. Weaker athletes should focus on developing strength before emphasizing power-type training. Stronger athletes may begin to emphasize power-type training while maintaining/improving their strength. Future research should

28 CFR 51.34 - Expedited consideration.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Expedited consideration. 51.34 Section 51... consideration. (a) When a submitting authority is required under State law or local ordinance or otherwise finds... the submission be given expedited consideration. The submission should explain why such consideration...

Adaptive Immunity to Francisella tularensis and Considerations for Vaccine Development

Directory of Open Access Journals (Sweden)

Lydia M. Roberts

2018-04-01

Full Text Available Francisella tularensis is an intracellular bacterium that causes the disease tularemia. There are several subspecies of F. tularensis whose ability to cause disease varies in humans. The most virulent subspecies, tularensis, is a Tier One Select Agent and a potential bioweapon. Although considerable effort has made to generate efficacious tularemia vaccines, to date none have been licensed for use in the United States. Despite the lack of a tularemia vaccine, we have learned a great deal about the adaptive immune response the underlies protective immunity. Herein, we detail the animal models commonly used to study tularemia and their recapitulation of human disease, the field's current understanding of vaccine-mediated protection, and discuss the challenges associated with new vaccine development.

32 CFR 643.74 - Consideration.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Consideration. 643.74 Section 643.74 National... Licenses § 643.74 Consideration. When a license is granted under the authority of an easement or leasing statute, the same rules will apply in regard to consideration as is applicable to the granting of an...

Bouncing Ball with a Uniformly Varying Velocity in a Metronome Synchronization Task.

Science.gov (United States)

Huang, Yingyu; Gu, Li; Yang, Junkai; Wu, Xiang

2017-09-21

Sensorimotor synchronization (SMS), a fundamental human ability to coordinate movements with external rhythms, has long been thought to be modality specific. In the canonical metronome synchronization task that requires tapping a finger along with an isochronous sequence, a well-established finding is that synchronization is much more stable to an auditory sequence consisting of auditory tones than to a visual sequence consisting of visual flashes. However, recent studies have shown that periodically moving visual stimuli can substantially improve synchronization compared with visual flashes. In particular, synchronization of a visual bouncing ball that has a uniformly varying velocity was found to be not less stable than synchronization of auditory tones. Here, the current protocol describes the application of the bouncing ball with a uniformly varying velocity in a metronome synchronization task. The usage of the bouncing ball in sequences with different inter-onset intervals (IOI) is included. The representative results illustrate synchronization performance of the bouncing ball, as compared with the performances of auditory tones and visual flashes. Given its comparable synchronization performance to that of auditory tones, the bouncing ball is of particular importance for addressing the current research topic of whether modality-specific mechanisms underlay SMS.

Zhang neural network for online solution of time-varying convex quadratic program subject to time-varying linear-equality constraints

International Nuclear Information System (INIS)

Zhang Yunong; Li Zhan

2009-01-01

In this Letter, by following Zhang et al.'s method, a recurrent neural network (termed as Zhang neural network, ZNN) is developed and analyzed for solving online the time-varying convex quadratic-programming problem subject to time-varying linear-equality constraints. Different from conventional gradient-based neural networks (GNN), such a ZNN model makes full use of the time-derivative information of time-varying coefficient. The resultant ZNN model is theoretically proved to have global exponential convergence to the time-varying theoretical optimal solution of the investigated time-varying convex quadratic program. Computer-simulation results further substantiate the effectiveness, efficiency and novelty of such ZNN model and method.

High performance work practices, innovation and performance

DEFF Research Database (Denmark)

Jørgensen, Frances; Newton, Cameron; Johnston, Kim

2013-01-01

Research spanning nearly 20 years has provided considerable empirical evidence for relationships between High Performance Work Practices (HPWPs) and various measures of performance including increased productivity, improved customer service, and reduced turnover. What stands out from......, and Africa to examine these various questions relating to the HPWP-innovation-performance relationship. Each paper discusses a practice that has been identified in HPWP literature and potential variables that can facilitate or hinder the effects of these practices of innovation- and performance...

Effect of Neat Sardine Oil with Varies Blends on the Performance ...

African Journals Online (AJOL)

This study investigates the performance and emission characteristics of a diesel engine which is fuelled with neat sardine oil and diesel. A single cylinder four stroke diesel engine was used for the experiments at various load and speed of 1500 rpm. An AVL5 gas analyzer and a smoke meter were used for the ...

Robustness analysis of the Zhang neural network for online time-varying quadratic optimization

International Nuclear Information System (INIS)

Zhang Yunong; Ruan Gongqin; Li Kene; Yang Yiwen

2010-01-01

A general type of recurrent neural network (termed as Zhang neural network, ZNN) has recently been proposed by Zhang et al for the online solution of time-varying quadratic-minimization (QM) and quadratic-programming (QP) problems. Global exponential convergence of the ZNN could be achieved theoretically in an ideal error-free situation. In this paper, with the normal differentiation and dynamics-implementation errors considered, the robustness properties of the ZNN model are investigated for solving these time-varying problems. In addition, linear activation functions and power-sigmoid activation functions could be applied to such a perturbed ZNN model. Both theoretical-analysis and computer-simulation results demonstrate the good ZNN robustness and superior performance for online time-varying QM and QP problem solving, especially when using power-sigmoid activation functions.

Robust stabilisation of time-varying delay systems with probabilistic uncertainties

Science.gov (United States)

Jiang, Ning; Xiong, Junlin; Lam, James

2016-09-01

For robust stabilisation of time-varying delay systems, only sufficient conditions are available to date. A natural question is as follows: if the existing sufficient conditions are not satisfied, and hence no controllers can be found, what can one do to improve the stability performance of time-varying delay systems? This question is addressed in this paper when there is a probabilistic structure on the parameter uncertainty set. A randomised algorithm is proposed to design a state-feedback controller, which stabilises the system over the uncertainty domain in a probabilistic sense. The capability of the designed controller is quantified by the probability of stability of the resulting closed-loop system. The accuracy of the solution obtained from the randomised algorithm is also analysed. Finally, numerical examples are used to illustrate the effectiveness and advantages of the developed controller design approach.

Shape and Spatially-Varying Reflectance Estimation from Virtual Exemplars.

Science.gov (United States)

Hui, Zhuo; Sankaranarayanan, Aswin C

2017-10-01

This paper addresses the problem of estimating the shape of objects that exhibit spatially-varying reflectance. We assume that multiple images of the object are obtained under a fixed view-point and varying illumination, i.e., the setting of photometric stereo. At the core of our techniques is the assumption that the BRDF at each pixel lies in the non-negative span of a known BRDF dictionary. This assumption enables a per-pixel surface normal and BRDF estimation framework that is computationally tractable and requires no initialization in spite of the underlying problem being non-convex. Our estimation framework first solves for the surface normal at each pixel using a variant of example-based photometric stereo. We design an efficient multi-scale search strategy for estimating the surface normal and subsequently, refine this estimate using a gradient descent procedure. Given the surface normal estimate, we solve for the spatially-varying BRDF by constraining the BRDF at each pixel to be in the span of the BRDF dictionary; here, we use additional priors to further regularize the solution. A hallmark of our approach is that it does not require iterative optimization techniques nor the need for careful initialization, both of which are endemic to most state-of-the-art techniques. We showcase the performance of our technique on a wide range of simulated and real scenes where we outperform competing methods.

Adolescent Work Intensity, School Performance, and Substance Use: Links Vary by Race/Ethnicity and Socioeconomic Status

OpenAIRE

Bachman, Jerald G.; Patrick, Jeremy Staff; O’Malley, M.; Freedman-Doan, Peter

2013-01-01

High school students who spend long hours in paid employment during the school year are at increased risk of lower grades and higher substance use, although questions remain about whether these linkages reflect causation or prior differences (selection effects). Questions also remain about whether such associations vary by socioeconomic status (SES) and race/ethnicity. This study examines those questions using nationally representative data from two decades (1991–2010) of annual Monitoring th...

Spacetime-varying couplings and Lorentz violation

International Nuclear Information System (INIS)

Kostelecky, V. Alan; Lehnert, Ralf; Perry, Malcolm J.

2003-01-01

Spacetime-varying coupling constants can be associated with violations of local Lorentz invariance and CPT symmetry. An analytical supergravity cosmology with a time-varying fine-structure constant provides an explicit example. Estimates are made for some experimental constraints

Efeitos de variáveis individuais e contextuais sobre desempenho individual no trabalho Effects of individuals and contextual variables on individual performance at work

Directory of Open Access Journals (Sweden)

Francisco Antonio Coelho Junior

2011-08-01

Full Text Available O presente trabalho objetivou testar empiricamente um modelo teórico multinível de predição de desempenho individual no trabalho. As variáveis antecedentes investigadas, isoladas ou em interação, corresponderam à idade, gênero, cargo, grau de escolaridade, tempo de serviço e percepção de suporte à aprendizagem, medidas no nível individual e de contexto, e satisfação no trabalho, de nível individual. A pesquisa foi realizada em uma empresa pública, do ramo de pesquisas agropecuária e atuação nacional. A amostra (N = 808 contou com funcionários distribuídos em 45 unidades centralizadas e descentralizadas da empresa pelo Brasil. A coleta de dados foi realizada à distância, via e-mail. Os resultados multiníveis corroboraram o modelo teórico de pesquisa hipotetizado e evidenciaram que a variância de desempenho foi explicada por distintos preditores de nível individual e de contexto, isoladamente ou em interação.This paper aims to empirically test a theoretical multilevel model for the prediction of individual performance at work. Antecedent variables, isolated or in interaction, were age, gender, function, scholarity, period of function and perception of learning support, in the individual and contextual levels, and satisfaction at work, an individual variable. This study was accomplished in a public corporation which deals with agricultural research in a national scope. The participants (N = 808 were distribute in 45 central and noncentral units for the Brazil. Data collection was done online, by e-mail. The multilevel results confirm the hypothetic theoretical model and make evident that the performance's variance were predicted by different individuals and context variables, isolated or in interaction.

Nonlinear isochrones in murine left ventricular pressure-volume loops: how well does the time-varying elastance concept hold?

Science.gov (United States)

Claessens, T E; Georgakopoulos, D; Afanasyeva, M; Vermeersch, S J; Millar, H D; Stergiopulos, N; Westerhof, N; Verdonck, P R; Segers, P

2006-04-01

The linear time-varying elastance theory is frequently used to describe the change in ventricular stiffness during the cardiac cycle. The concept assumes that all isochrones (i.e., curves that connect pressure-volume data occurring at the same time) are linear and have a common volume intercept. Of specific interest is the steepest isochrone, the end-systolic pressure-volume relationship (ESPVR), of which the slope serves as an index for cardiac contractile function. Pressure-volume measurements, achieved with a combined pressure-conductance catheter in the left ventricle of 13 open-chest anesthetized mice, showed a marked curvilinearity of the isochrones. We therefore analyzed the shape of the isochrones by using six regression algorithms (two linear, two quadratic, and two logarithmic, each with a fixed or time-varying intercept) and discussed the consequences for the elastance concept. Our main observations were 1) the volume intercept varies considerably with time; 2) isochrones are equally well described by using quadratic or logarithmic regression; 3) linear regression with a fixed intercept shows poor correlation (R(2) volume intercept of the ESPVR. In conclusion, the linear time-varying elastance fails to provide a sufficiently robust model to account for changes in pressure and volume during the cardiac cycle in the mouse ventricle. A new framework accounting for the nonlinear shape of the isochrones needs to be developed.

Stability design considerations for mirror support systems in ICF lasers

International Nuclear Information System (INIS)

Tietbohl, G.L.; Sommer, S.C.

1996-10-01

Some of the major components of laser systems used for Inertial Confinement Fusion (ICF) are the large aperture mirrors which direct the path of the laser. These mirrors are typically supported by systems which consist of mirror mounts, mirror enclosures, superstructures, and foundations. Stability design considerations for the support systems of large aperture mirrors have been developed based on the experience of designing and evaluating similar systems at the Lawrence Livermore National Laboratory (LLNL). Examples of the systems developed at LLNL include Nova, the Petawatt laser, Beamlet, and the National Ignition Facility (NIF). The structural design of support systems of large aperture mirrors has typically been controlled by stability considerations in order for the large laser system to meet its performance requirements for alignment and positioning. This paper will discuss the influence of stability considerations and will provide guidance on the structural design and evaluation of mirror support systems in ICF lasers so that this information can be used on similar systems

Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy

Directory of Open Access Journals (Sweden)

Jose Mario Paiva

2017-11-01

Full Text Available Tribological phenomena and tool wear mechanisms during machining of hard-to-cut TiAl6V4 aerospace alloy have been investigated in detail. Since cutting tool wear is directly affected by tribological phenomena occurring between the surfaces of the workpiece and the cutting tool, the performance of the cutting tool is strongly associated with the conditions of the machining process. The present work shows the effect of different machining conditions on the tribological and wear performance of TiB2-coated cutting tools compared to uncoated carbide tools. FEM modeling of the temperature profile on the friction surface was performed for wet machining conditions under varying cutting parameters. Comprehensive characterization of the TiB2 coated vs. uncoated cutting tool wear performance was made using optical 3D imaging, SEM/EDX and XPS methods respectively. The results obtained were linked to the FEM modeling. The studies carried out show that during machining of the TiAl6V4 alloy, the efficiency of the TiB2 coating application for carbide cutting tools strongly depends on cutting conditions. The TiB2 coating is very efficient under roughing at low speeds (with strong buildup edge formation. In contrast, it shows similar wear performance to the uncoated tool under finishing operations at higher cutting speeds when cratering wear predominates.

Harbour porpoise distribution can vary at small spatiotemporal scales in energetic habitats

Science.gov (United States)

Benjamins, Steven; van Geel, Nienke; Hastie, Gordon; Elliott, Jim; Wilson, Ben

2017-07-01

Marine habitat heterogeneity underpins species distribution and can be generated through interactions between physical and biological drivers at multiple spatiotemporal scales. Passive acoustic monitoring (PAM) is used worldwide to study potential impacts of marine industrial activities on cetaceans, but understanding of animals' site use at small spatiotemporal scales (marine renewable energy development (MRED) sites was investigated by deploying dense arrays of C-POD passive acoustic detectors at a wave energy test site (the European Marine Energy Centre [Billia Croo, Orkney]) and by a minor tidal-stream site (Scarba [Inner Hebrides]). Respective arrays consisted of 7 and 11 moorings containing two C-PODs each and were deployed for up to 55 days. Minimum inter-mooring distances varied between 300-600 m. All C-POD data were analysed at a temporal resolution of whole minutes, with each minute classified as 1 or 0 on the basis of presence/absence of porpoise click trains (Porpoise-Positive Minutes/PPMs). Porpoise detection rates were analysed using Generalised Additive Models (GAMs) with Generalised Estimation Equations (GEEs). Although there were many porpoise detections (wave test site: N=3,432; tidal-stream site: N=17,366), daily detection rates varied significantly within both arrays. Within the wave site array (<1 km diameter), average daily detection rates varied from 4.3 to 14.8 PPMs/day. Within the tidal-stream array (<2 km diameter), average daily detection rates varied from 10.3 to 49.7 PPMs/day. GAM-GEE model results for individual moorings within both arrays indicated linkages between porpoise presence and small-scale heterogeneity among different environmental covariates (e.g., tidal phase, time of day). Porpoise detection rates varied considerably but with coherent patterns between moorings only several hundred metres apart and within hours. These patterns presumably have ecological relevance. These results indicate that, in energetically active and

Effect of gasket of varying thickness on spark ignition engines | Ajayi ...

African Journals Online (AJOL)

In the study of Toyota, In-line, 4 cylinders, spark ignition engine using gaskets of varying thicknesses (1.75mm, 3.5mm, 5.25mm, 7mm and 8.75mm) between the cylinder head and the engine block, the performance characteristics of the engine was investigated via the effect of engine speed on brake power, brake thermal ...

Low-order feedforward controllers: Optimal performance and practical considerations

OpenAIRE

Hast, Martin; Hägglund, Tore

2014-01-01

Feedforward control from measurable disturbances can significantly improve the performance in control loops. However, tuning rules for such controllers are scarce. In this paper design rules for how to choose optimal low-order feedforward controller parameter are presented. The parameters are chosen so that the integrated squared error, when the system is subject to a step disturbance, is minimized. The approach utilizes a controller structure that decouples the feedforward and the feedback c...

Effects of Marathi-Hindi Bilingualism on Neuropsychological Performance

Science.gov (United States)

Kamat, Rujvi; Ghate, Manisha; Gollan, Tamar H.; Meyer, Rachel; Vaida, Florin; Heaton, Robert K.; Letendre, Scott; Franklin, Donald; Alexander, Terry; Grant, Igor; Mehendale, Sanjay; Marcotte, Thomas D.

2013-01-01

The present study aimed to examine if bilingualism affects executive functions and verbal fluency in Marathi and Hindi, two major languages in India, with a considerable cognate (e.g., activity is actividad in Spanish) overlap. A total of 174 native Marathi speakers from Pune, India, with varying levels of Hindi proficiency were administered tests of executive functioning and verbal performance in Marathi. A bilingualism index was generated using self-reported Hindi and Marathi proficiency. After controlling for demographic variables, the association between bilingualism and cognitive performance was examined. Degree of bilingualism predicted better performance on the switching (Color Trails-2) and inhibition (Stroop Color-Word) components of executive functioning; but not for the abstraction component (Halstead Category Test). In the verbal domain, bilingualism was more closely associated with noun generation (where the languages share many cognates) than verb generation (which are more disparate across these languages), as predicted. However, contrary to our hypothesis that the bilingualism “disadvantage” would be attenuated on noun generation, bilingualism was associated with an advantage on these measures. These findings suggest distinct patterns of bilingualism effects on cognition for this previously unexamined language pair, and that the rate of cognates may modulate the association between bilingualism and verbal performance on neuropsychological tests. PMID:22206622

Effects of Marathi-Hindi bilingualism on neuropsychological performance.

Science.gov (United States)

Kamat, Rujvi; Ghate, Manisha; Gollan, Tamar H; Meyer, Rachel; Vaida, Florin; Heaton, Robert K; Letendre, Scott; Franklin, Donald; Alexander, Terry; Grant, Igor; Mehendale, Sanjay; Marcotte, Thomas D

2012-03-01

The present study aimed to examine if bilingualism affects executive functions and verbal fluency in Marathi and Hindi, two major languages in India, with a considerable cognate (e.g., activity is actividad in Spanish) overlap. A total of 174 native Marathi speakers from Pune, India, with varying levels of Hindi proficiency were administered tests of executive functioning and verbal performance in Marathi. A bilingualism index was generated using self-reported Hindi and Marathi proficiency. After controlling for demographic variables, the association between bilingualism and cognitive performance was examined. Degree of bilingualism predicted better performance on the switching (Color Trails-2) and inhibition (Stroop Color-Word) components of executive functioning; but not for the abstraction component (Halstead Category Test). In the verbal domain, bilingualism was more closely associated with noun generation (where the languages share many cognates) than verb generation (which are more disparate across these languages), as predicted. However, contrary to our hypothesis that the bilingualism "disadvantage" would be attenuated on noun generation, bilingualism was associated with an advantage on these measures. These findings suggest distinct patterns of bilingualism effects on cognition for this previously unexamined language pair, and that the rate of cognates may modulate the association between bilingualism and verbal performance on neuropsychological tests.

Estimation of time-varying reactivity by the H∞ optimal linear filter

International Nuclear Information System (INIS)

Suzuki, Katsuo; Shimazaki, Junya; Watanabe, Koiti

1995-01-01

The problem of estimating the time-varying net reactivity from flux measurements is solved for a point reactor kinetics model using a linear filtering technique in an H ∞ settings. In order to sue this technique, an appropriate dynamical model of the reactivity is constructed that can be embedded into the reactor model as one of its variables. A filter, which minimizes the H ∞ norm of the estimation error power spectrum, operates on neutron density measurements corrupted by noise and provides an estimate of the dynamic net reactivity. Computer simulations are performed to reveal the basic characteristics of the H ∞ optimal filter. The results of the simulation indicate that the filter can be used to determine the time-varying reactivity from neutron density measurements that have been corrupted by noise

Chaetognath community and their responses to varying environmental factors in the northern Indian ocean.

Digital Repository Service at National Institute of Oceanography (India)

Kusum, K.K.; Vineetha, G.; Raveendran, T.V.; Nair, V.R.; Muraleedharan, K.R.; Achuthankutty, C.T.; Joseph, T.

The ecology of the chaetognath community and its relation to varying environmental factors were studied in the eastern half of the northern Indian Ocean. Analysis of data from two major oceanographic programmes performed over four decades apart...

Implantable intraocular pressure monitoring systems: Design considerations

KAUST Repository

Arsalan, Muhammad

2013-12-01

Design considerations and limitations of implantable Intraocular Pressure Monitoring (IOPM) systems are presented in this paper. Detailed comparison with the state of the art is performed to highlight the benefits and challenges of the proposed design. The system-on-chip, presented here, is battery free and harvests energy from incoming RF signals. This low-cost design, in standard CMOS process, does not require any external components or bond wires to function. This paper provides useful insights to the designers of implantable wireless sensors in terms of design choices and associated tradeoffs. © 2013 IEEE.

Implantable intraocular pressure monitoring systems: Design considerations

KAUST Repository

Arsalan, Muhammad; Ouda, Mahmoud H.; Marnat, Loic; Shamim, Atif; Salama, Khaled N.

2013-01-01

Design considerations and limitations of implantable Intraocular Pressure Monitoring (IOPM) systems are presented in this paper. Detailed comparison with the state of the art is performed to highlight the benefits and challenges of the proposed design. The system-on-chip, presented here, is battery free and harvests energy from incoming RF signals. This low-cost design, in standard CMOS process, does not require any external components or bond wires to function. This paper provides useful insights to the designers of implantable wireless sensors in terms of design choices and associated tradeoffs. © 2013 IEEE.

Long Memory of Financial Time Series and Hidden Markov Models with Time-Varying Parameters

DEFF Research Database (Denmark)

Nystrup, Peter; Madsen, Henrik; Lindström, Erik

2016-01-01

Hidden Markov models are often used to model daily returns and to infer the hidden state of financial markets. Previous studies have found that the estimated models change over time, but the implications of the time-varying behavior have not been thoroughly examined. This paper presents an adaptive...... to reproduce with a hidden Markov model. Capturing the time-varying behavior of the parameters also leads to improved one-step density forecasts. Finally, it is shown that the forecasting performance of the estimated models can be further improved using local smoothing to forecast the parameter variations....

Leading-Edge Noise Prediction of General Airfoil Profiles with Spanwise-Varying Inflow Conditions

NARCIS (Netherlands)

Miotto, Renato Fuzaro; Wolf, William Roberto; De Santana, Leandro Dantas

2018-01-01

This paper presents a study of the leading-edge noise radiated by an airfoil undergoing a turbulent inflow. The noise prediction of generic airfoil profiles subjected to spanwise-varying inflow conditions is performed with the support of Amiet’s theory and the inverse strip technique. In the

Physicochemical effects of varying fuel composition on knock characteristics of natural gas mixtures

NARCIS (Netherlands)

Gersen, Sander; van Essen, Martijn; van Dijk, Gerco; Levinsky, Howard

2014-01-01

The physicochemical origins of how changes in fuel composition affect autoignition of the end gas, leading to engine knock, are analyzed for a natural gas engine. Experiments in a lean-burn, high-speed medium-BMEP gas engine are performed using a reference natural gas with systematically varied

Leading-Edge Noise Prediction of General Airfoil Profiles with Spanwise-Varying Inflow Conditions

NARCIS (Netherlands)

Miotto, Renato Fuzaro; Wolf, William Roberto; De Santana, Leandro Dantas

This paper presents a study of the leading-edge noise radiated by an airfoil undergoing a turbulent inflow. The noise prediction of generic airfoil profiles subjected to spanwise-varying inflow conditions is performed with the support of Amiet’s theory and the inverse strip technique. In the

Maternal, social and abiotic environmental effects on growth vary across life stages in a cooperative mammal.

Science.gov (United States)

English, Sinead; Bateman, Andrew W; Mares, Rafael; Ozgul, Arpat; Clutton-Brock, Tim H

2014-03-01

Resource availability plays a key role in driving variation in somatic growth and body condition, and the factors determining access to resources vary considerably across life stages. Parents and carers may exert important influences in early life, when individuals are nutritionally dependent, with abiotic environmental effects having stronger influences later in development as individuals forage independently. Most studies have measured specific factors influencing growth across development or have compared relative influences of different factors within specific life stages. Such studies may not capture whether early-life factors continue to have delayed effects at later stages, or whether social factors change when individuals become nutritionally independent and adults become competitors for, rather than providers of, food. Here, we examined variation in the influence of the abiotic, social and maternal environment on growth across life stages in a wild population of cooperatively breeding meerkats. Cooperatively breeding vertebrates are ideal for investigating environmental influences on growth. In addition to experiencing highly variable abiotic conditions, cooperative breeders are typified by heterogeneity both among breeders, with mothers varying in age and social status, and in the number of carers present. Recent rainfall had a consistently marked effect on growth across life stages, yet other seasonal terms only influenced growth during stages when individuals were growing fastest. Group size and maternal dominance status had positive effects on growth during the period of nutritional dependence on carers, but did not influence mass at emergence (at 1 month) or growth at independent stages (>4 months). Pups born to older mothers were lighter at 1 month of age and subsequently grew faster as subadults. Males grew faster than females during the juvenile and subadult stage only. Our findings demonstrate the complex ways in which the external environment

Dynamic IQC-Based Control of Uncertain LFT Systems With Time-Varying State Delay.

Science.gov (United States)

Yuan, Chengzhi; Wu, Fen

2016-12-01

This paper presents a new exact-memory delay control scheme for a class of uncertain systems with time-varying state delay under the integral quadratic constraint (IQC) framework. The uncertain system is described as a linear fractional transformation model including a state-delayed linear time-invariant (LTI) system and time-varying structured uncertainties. The proposed exact-memory delay controller consists of a linear state-feedback control law and an additional term that captures the delay behavior of the plant. We first explore the delay stability and the L 2 -gain performance using dynamic IQCs incorporated with quadratic Lyapunov functions. Then, the design of exact-memory controllers that guarantee desired L 2 -gain performance is examined. The resulting delay control synthesis conditions are formulated in terms of linear matrix inequalities, which are convex on all design variables including the scaling matrices associated with the IQC multipliers. The IQC-based exact-memory control scheme provides a novel approach for delay control designs via convex optimization, and advances existing control methods in two important ways: 1) better controlled performance and 2) simplified design procedure with less computational cost. The effectiveness and advantages of the proposed approach have been demonstrated through numerical studies.

49 CFR 260.7 - Priority consideration.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Priority consideration. 260.7 Section 260.7... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Overview § 260.7 Priority consideration. When evaluating applications, the Administrator will give priority consideration (but not necessarily in the following order...

Off-gas considerations for a vitrification plant in the republic of Korea

International Nuclear Information System (INIS)

Chun, Ung Kyung; Park, Jong Kil; Yang, Kyung Hwa; Song, Myung Jae

1997-01-01

The Republic of Korea is in the process of preparing for its first ever vitrification plant to handle low and intermediate-level radioactive waste from her pressurized water reactors (PWRs). KEPRI, in coordination with her partners, will design, construct, and erect a pilot plant using data from the orientation tests. The pilot plant will be the basis for the development of the final objective, the establishment of an industrial scale vitrification installation in the Republic of Korea. Throughout these projects, the major goal is to minimize the harmful effects of the final waste form to the environment. The gaseous effluents emissions from the facility will need to be managed to meet the environmental regulations concerning gaseous releases into the environment of the Republic of Korea. The focus of this paper is on the considerations for the treatment of the off-gas for a low and intermediate-level radioactive waste treatment vitrification installation in the Republic of Korea. Off-gas considerations will span a wide-range of areas such as waste characteristics, thermal treatment systems, off-gas regulations, off-gas characteristics, assessment of air pollution control devices, systems assessments, numerical modelling, economics etc. Off-gas regulations in Korea are becoming tighter and will likely change from year to year. In terms of both off-gas treatment equipment performance and public protection, the amount and nature (e.g. chemical behavior and morphology) of the species are important. The emissions may be classified as toxic metals, radionuclides, hydrocarbons, particulate matter, and acid gases. Air pollution control technologies are generally classified as wet or dry technologies covering over 40 different air pollution control devices (APCDs) with varying removal efficiencies for the different types of off-gas. In general, the state of the art systems for vitrification technologies incorporate the basic functions such as further oxidation of products

Orthoptic parameters and asthenopic symptoms analysis after 3D viewing at varying distances

Directory of Open Access Journals (Sweden)

Oleeviya Joseph

2018-05-01

Full Text Available AIM: To analyse visual modifications such as amplitude of accommodation, near point of convergence(NPCreopsis and near phoria associated with asthenopic symptoms after 3D viewing at varying distances.METHODS: A prospective study. Thirty young adults were randomly selected. Each individual was exposed to 3D viewing thrice in a day for a fixed distance and the distance was varied on three consecutive days. Same video of equal duration and different screen sizes were used for every distance. Cyclic 3D mode of K-multimedia(KMplayer was used for projecting the 3D video. Different variables like stereopsis, amplitude of accommodation, near point of accommodation, near phoria and asthenopic symptoms were recorded immediately after 3D video viewing. Stereopsis was measured with “Toegepast Natuurwetenschappelijk Onderzoek” or “Netherlands Organisation for Applied Scientific Research”(TNO test, amplitude of accommodation and NPC were measured using RAF ruler, near phoria was measured using prism bar and a closed ended sample questionnaire was used to know the occurrence of asthenopic symptoms. Statistical analyses were performed using descriptive statistics, paired t-test etc. Qualitative data was analyzed using Chi-square test.RESULTS: For every distance of 40 cm, 3 m and 6 m, amplitude of accommodation was significantly reduced by 0.66 D, 1.12 D and 1.44 D. NPC got significantly receded by 0.63 cm, 0.93 cm and 1.23 cm, and the near phoria was significantly increased by 0.87, and 2.2 prism dioptres(PDbase-in respectively. It was found that most of the subjects got pain around the eyes, headache and irritation for each viewing distance. This study also revealed that 3D video viewing in theaters may increase the symptoms of headache, watering and irritation. Symptoms like headache, watering, fatigue, irritation and nausea may increase considerably at home environment and symptoms such as headache and watering may cause significant discomfort by 3D

Effect of intra- and interspecific competition on the performance of native and invasive species of Impatiens under varying levels of shade and moisture.

Science.gov (United States)

Skálová, Hana; Jarošík, Vojtěch; Dvořáčková, Śárka; Pyšek, Petr

2013-01-01

Many alien plants are thought to be invasive because of unique traits and greater phenotypic plasticity relative to resident species. However, many studies of invasive species are unable to quantify the importance of particular traits and phenotypic plasticity in conferring invasive behavior because traits used in comparative studies are often measured in a single environment and by using plants from a single population. To obtain a deeper insight into the role of environmental factors, local differences and competition in plant invasions, we compared species of Impatiens (Balsaminaceae) of different origin and invasion status that occur in central Europe: native I. noli-tangere and three alien species (highly invasive I. glandulifera, less invasive I. parviflora and potentially invasive I. capensis). In two experiments we harvested late-stage reproductive plants to estimate performance. The first experiment quantified how populations differed in performance under varying light and moisture levels in the absence of competition. The second experiment quantified performance across these environments in the presence of intra- and inter-specific competition. The highly invasive I. glandulifera was the strongest competitor, was the tallest and produced the greatest biomass. Small size and high plasticity were characteristic for I. parviflora. This species appeared to be the second strongest competitor, especially under low soil moisture. The performance of I. capensis was within the range of the other Impatiens species studied, but sometimes limited by alien competitors. Our results suggest that invasion success within the genus Impatiens depends on the ability to grow large under a range of environmental conditions, including competition. The invasive species also exhibited greater phenotypic plasticity across environmental conditions than the native species. Finally, the decreased performance of the native I. noli-tangere in competition with other species studied

Effect of intra- and interspecific competition on the performance of native and invasive species of Impatiens under varying levels of shade and moisture.

Directory of Open Access Journals (Sweden)

Hana Skálová

Full Text Available Many alien plants are thought to be invasive because of unique traits and greater phenotypic plasticity relative to resident species. However, many studies of invasive species are unable to quantify the importance of particular traits and phenotypic plasticity in conferring invasive behavior because traits used in comparative studies are often measured in a single environment and by using plants from a single population. To obtain a deeper insight into the role of environmental factors, local differences and competition in plant invasions, we compared species of Impatiens (Balsaminaceae of different origin and invasion status that occur in central Europe: native I. noli-tangere and three alien species (highly invasive I. glandulifera, less invasive I. parviflora and potentially invasive I. capensis. In two experiments we harvested late-stage reproductive plants to estimate performance. The first experiment quantified how populations differed in performance under varying light and moisture levels in the absence of competition. The second experiment quantified performance across these environments in the presence of intra- and inter-specific competition. The highly invasive I. glandulifera was the strongest competitor, was the tallest and produced the greatest biomass. Small size and high plasticity were characteristic for I. parviflora. This species appeared to be the second strongest competitor, especially under low soil moisture. The performance of I. capensis was within the range of the other Impatiens species studied, but sometimes limited by alien competitors. Our results suggest that invasion success within the genus Impatiens depends on the ability to grow large under a range of environmental conditions, including competition. The invasive species also exhibited greater phenotypic plasticity across environmental conditions than the native species. Finally, the decreased performance of the native I. noli-tangere in competition with other

Frequency-scanning interferometry using a time-varying Kalman filter for dynamic tracking measurements.

Science.gov (United States)

Jia, Xingyu; Liu, Zhigang; Tao, Long; Deng, Zhongwen

2017-10-16

Frequency scanning interferometry (FSI) with a single external cavity diode laser (ECDL) and time-invariant Kalman filtering is an effective technique for measuring the distance of a dynamic target. However, due to the hysteresis of the piezoelectric ceramic transducer (PZT) actuator in the ECDL, the optical frequency sweeps of the ECDL exhibit different behaviors, depending on whether the frequency is increasing or decreasing. Consequently, the model parameters of Kalman filter appear time varying in each iteration, which produces state estimation errors with time-invariant filtering. To address this, in this paper, a time-varying Kalman filter is proposed to model the instantaneous movement of a target relative to the different optical frequency tuning durations of the ECDL. The combination of the FSI method with the time-varying Kalman filter was theoretically analyzed, and the simulation and experimental results show the proposed method greatly improves the performance of dynamic FSI measurements.

46 CFR 175.550 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 175.550 Section 175.550 Shipping...) GENERAL PROVISIONS § 175.550 Special consideration. In applying the provisions of this subchapter, the OCMI may give special consideration to authorizing departures from the specific requirements when...

Ethical considerations in sexual health research: A narrative review

Directory of Open Access Journals (Sweden)

Maryam Shirmohammadi

2018-01-01

Full Text Available Background: There is an assumption that sexual health research has great influence on the quality of human life through elevating sexual health standards, and their results will eliminate the burden of sexual health challenges on family relationships. The aim of this study was to review ethical considerations in sexual health research. Materials and Methods: This narrative review was conducted between January 1990 and December 2017 based on the five-step approach of York University. The keywords used to search for the studies included ethical issues, research, sexual health, reproductive health, and sensitive topics. The language of the literatures was English and the search process was performed on PubMed, Elsevier, Ovid, Springer, Google Scholar, ResearchGate, SAGE Publishing, ProQuest, WHO website, Kinsey Confidential, and Worldsexology. Results: After assessing the quality and eligibility of 94 articles, 13 were selected. The results of the present study showed that the most important ethical considerations were protecting the confidentiality and privacy of participants, obtaining informed consent, and paying attention to vulnerable people. Conclusions: The review of literature exhibited several considerations that sexual health researchers are faced with. In order to manage these considerations, the researcher should have sufficient understanding of them. The important matter is that strategies to manage these challenges should be completely rational and practical according to each context. These strategies can also be applied in other societies with great similarities in their context.

West Nile Virus workshop: scientific considerations for tissue donors.

Science.gov (United States)

Brubaker, Scott A; Robert Rigney, P

2012-08-01

This report contains selected excerpts, presented as a summary, from a public workshop sponsored by the American Association of Tissue Banks (AATB) held to discuss West Nile Virus (WNV) and scientific considerations for tissue donors. The daylong workshop was held 9 July 2010 at the Ritz-Carlton Hotel at Tyson's Corner in McLean, Virginia, United States (U.S.). The workshop was designed to determine and discuss scientific information that is known, and what is not known, regarding WNV infection and transmission. The goal is to determine how to fill gaps in knowledge of WNV and tissue donation and transplantation by pursuing relevant scientific studies. This information should ultimately support decisions leading to appropriate tissue donor screening and testing considerations. Discussion topics were related to identifying these gaps and determining possible solutions. Workshop participants included subject-matter experts from the U.S. Food and Drug Administration, the Centers for Disease Control and Prevention, U.S. Department of Health and Human Services, Health Canada, the Public Health Agency of Canada, AATB-accredited tissue banks including reproductive tissue banks, accredited eye banks of the Eye Bank Association of America, testing laboratories, and infectious disease and organ transplantation professionals. After all presentations concluded, a panel addressed this question: "What are the scientific considerations for tissue donors and what research could be performed to address those considerations?" The slide presentations from the workshop are available at: http://www.aatb.org/2010-West-Nile-Virus-Workshop-Presentations.

Electrical resistance imaging of a time-varying interface in stratified flows using an unscented Kalman filter

International Nuclear Information System (INIS)

Ijaz, Umer Zeeshan; Khambampati, Anil Kumar; Kim, Kyung Youn; Chung, Soon Il; Kim, Sin

2008-01-01

In this paper, we estimate a time-varying interfacial boundary in stratified flows of two immiscible liquids using electrical resistance tomography. The interfacial boundary is approximated with front points spaced discretely along the interface. The design variables to be estimated are the locations of the front points, which are varying with the moving interface. The inverse problem is treated as a stochastic nonlinear state estimation problem with the nonstationary phase boundary (state) being estimated with the aid of an unscented Kalman filter. Numerical experiments are performed to evaluate the performance of an unscented Kalman filter. Specifically, a detailed analysis has been done on the effect of the number of front points and contrast ratio on the reconstruction performance. The reconstruction results show that an unscented Kalman filter is better suited for estimation in comparison to the conventional extended Kalman filter

Testing and estimating time-varying elasticities of Swiss gasoline demand

International Nuclear Information System (INIS)

Neto, David

2012-01-01

This paper is intended to test and estimate time-varying elasticities for gasoline demand in Switzerland. For this purpose, a smooth time-varying cointegrating parameters model is investigated in order to describe smooth mutations of the Swiss gasoline demand. The methodology, based on Chebyshev polynomials, is rigorously outlined. Our empirical finding states that the time-invariance assumption does not hold for long-run price and income elasticities. Furthermore they highlight that gasoline demand passed through some periods of sensitivity and non sensitivity with respect to the price. Our empirical statements are of great importance to assess the performance of a gasoline tax as an instrument for CO 2 reduction policy. Indeed, such an instrument can contribute to reduce emissions of greenhouse gases only if the demand is not fully inelastic with respect to the price. Our results suggest that such a carbon-tax would not be always suitable since the price elasticity is found not stable over time and not always significant.

Mining and sustainable development: Considerations for minerals supply

International Nuclear Information System (INIS)

Lambert, Ian B.

2001-01-01

Sustainable development involves meeting the needs of human societies while maintaining viable biological and physical Earth systems. The needs include minerals: metals, fuels, industrial and construction materials. There will continue to be considerable demand for virgin mineral resources, even if levels of recycling and efficiency of use are optimal, and rates of population growth and globalisation decrease significantly. This article aims to stimulate debate on strategic issues for minerals supply. While the world has considerable stocks of mineral resources overall, international considerations of the environmental and social aspects of sustainable development are beginning to result in limitations on where mining will be conducted and what types of deposits will be mined. Current and emerging trends favour large mines in parts of the world where mining can be conducted within acceptable limits of environmental and social impact. Finding new deposits that meet such criteria will be all the more challenging given a disturbing global decline in the rate of discovery of major economic resources over the last decade, and the decreasing land area available for exploration and mining. To attract responsible exploration and mining, governments and mining nations will need to provide: regional-scale geo-scientific datasets as required to attract and guide future generations of exploration; resource access through multiple and sequential land use regimes, and frameworks for dealing with indigenous peoples' issues; and arrangements for consideration of mining proposals and regulation of mines that ensure responsible management of environmental and social issues. The minerals industry will need to continue to pursue advances in technologies for exploration, mining, processing, waste management and rehabilitation, and in public reporting of environmental and social performance. (author)

Design considerations: gas turbines for electric power generation

International Nuclear Information System (INIS)

Moon, D.M.

1979-01-01

The gas turbine represents one of the most sophisticated designs from the standpoint of time dependent deformation behavior. The large size of the equipment, which limits the amount of full scale testing, together with the demanding performance requirements and high level of reliability desired places a high degree of emphasis on the high temperature deformation design process. As an example of the various design considerations used in this equipment, a brief overview of the turbine will be given, highlighting the materials, stress, temperatures, and load history experienced by the major components. Particular attention will then be focused on the vane segment design considerations. This component is not only structurally complicated, but experiences steep temperature gradients imposed by internal cooling and large temperature transients during cyclic duty operation which have to be addressed in the design procedure. Based on this discussion the limitations of the current design procedures will be highlighted and the areas requiring additional research inputs will be discussed

Practical considerations in developing an instrument-maintenance plan--

International Nuclear Information System (INIS)

Guth, M.A.S.

1989-01-01

The author develops a general set of considerations to explain how a consistent, well-organized, prioritized, and adequate time-allowance program plan for routine maintenance can be constructed. The analysis is supplemented with experience from the high flux isotope reactor (HFIR) at US Oak Ridge National Laboratory (ORNL). After the preventive maintenance (PM) problem was defined, the instruments on the schedule were selected based on the manufacturer's design specifications, quality-assurance requirements, prior classifications, experiences with the incidence of breakdowns or calibration, and dependencies among instruments. The effects of repair error in PM should be also studied. The HFIR requires three full-time technicians to perform both PM and unscheduled maintenance. A review is presented of concepts from queuing theory to determine anticipated breakdown patterns. In practice, the pneumatic instruments have a much longer lifetime than the electric/electronic instruments on various reactors at ORNL. Some special considerations and risk aversion in choosing a maintenance schedule

Structural concepts and experimental considerations for a versatile high-speed research airplane

Science.gov (United States)

Jackson, L. R.; Kirkham, F. S.; Weidner, J. P.

1978-01-01

Future aircraft may be hydrogen fueled and fly at hypersonic speeds. The resulting environments will require new structural concepts to satisfy performance goals. Large representative structures will have to be flight tested prior to commitment to a costly vehicle fleet. To perform flight tests, a versatile, economical, high-speed research airplane is defined. Results of this study including experimental considerations for a hypersonic research airplane are reported.

15 CFR 2301.5 - Special consideration.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Special consideration. 2301.5 Section... PROGRAM Application Requirements § 2301.5 Special consideration. In accordance with section 392(f) of the Act, the Agency will give special consideration to applications that foster ownership of, operation of...

46 CFR 169.112 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 169.112 Section 169.112 Shipping... Provisions § 169.112 Special consideration. In applying the provisions of this part, the Officer in Charge, Marine Inspection, may give special consideration to departures from the specific requirements when...

Performance of green LTE networks powered by the smart grid with time varying user density

KAUST Repository

Ghazzai, Hakim

2013-09-01

In this study, we implement a green heuristic algorithm involving the base station sleeping strategy that aims to ensure energy saving for the radio access network of the 4GLTE (Fourth Generation Long Term Evolution) mobile networks. We propose an energy procurement model that takes into consideration the existence of multiple energy providers in the smart grid power system (e.g. fossil fuel and renewable energy sources, etc.) in addition to deployed photovoltaic panels in base station sites. Moreover, the analysis is based on the dynamic time variation of daily traffic and aims to maintain the network quality of service. Our simulation results show an important contribution in the reduction of CO2 emissions that can be reached by optimal power allocation over the active base stations. Copyright © 2013 by the Institute of Electrical and Electronic Engineers, Inc.

Linear Parameter Varying Versus Linear Time Invariant Reduced Order Controller Design of Turboprop Aircraft Dynamics

Directory of Open Access Journals (Sweden)

Widowati

2012-07-01

Full Text Available The applicability of parameter varying reduced order controllers to aircraft model is proposed. The generalization of the balanced singular perturbation method of linear time invariant (LTI system is used to reduce the order of linear parameter varying (LPV system. Based on the reduced order model the low-order LPV controller is designed by using synthesis technique. The performance of the reduced order controller is examined by applying it to lateral-directional control of aircraft model having 20th order. Furthermore, the time responses of the closed loop system with reduced order LPV controllers and reduced order LTI controller is compared. From the simulation results, the 8th order LPV controller can maintain stability and to provide the same level of closed-loop systems performance as the full-order LPV controller. It is different with the reduced-order LTI controller that cannot maintain stability and performance for all allowable parameter trajectories.

Children's Brain Responses to Optic Flow Vary by Pattern Type and Motion Speed.

Directory of Open Access Journals (Sweden)

Rick O Gilmore

Full Text Available Structured patterns of global visual motion called optic flow provide crucial information about an observer's speed and direction of self-motion and about the geometry of the environment. Brain and behavioral responses to optic flow undergo considerable postnatal maturation, but relatively little brain imaging evidence describes the time course of development in motion processing systems in early to middle childhood, a time when psychophysical data suggest that there are changes in sensitivity. To fill this gap, electroencephalographic (EEG responses were recorded in 4- to 8-year-old children who viewed three time-varying optic flow patterns (translation, rotation, and radial expansion/contraction at three different speeds (2, 4, and 8 deg/s. Modulations of global motion coherence evoked coherent EEG responses at the first harmonic that differed by flow pattern and responses at the third harmonic and dot update rate that varied by speed. Pattern-related responses clustered over right lateral channels while speed-related responses clustered over midline channels. Both children and adults show widespread responses to modulations of motion coherence at the second harmonic that are not selective for pattern or speed. The results suggest that the developing brain segregates the processing of optic flow pattern from speed and that an adult-like pattern of neural responses to optic flow has begun to emerge by early to middle childhood.

Consideration Sets and Their Role in Modelling Doctor Recommendations About Contraceptives.

Science.gov (United States)

Fiebig, Denzil G; Viney, Rosalie; Knox, Stephanie; Haas, Marion; Street, Deborah J; Hole, Arne R; Weisberg, Edith; Bateson, Deborah

2017-01-01

Decisions about prescribed contraception are typically the result of a consultation between a woman and her doctor. In order to better understand contraceptive choice within this environment, stated preference methods are utilized to ask doctors about what contraceptive options they would discuss with different types of women. The role of doctors is to confine their discussion to a subset of products that best match their patient. This subset of options forms the consideration set from which the ultimate recommendation is made. Given the existence of consideration sets we address the issue of how to model appropriately the ultimate recommendations. The estimated models enable us to characterize doctor recommendations and how they vary with patient attributes and to highlight where recommendations are clear and when they are uncertain. The results also indicate systematic variation in recommendations across different types of doctors, and in particular we observe that some doctors are reluctant to embrace new products and instead recommend those that are more familiar. Such effects are one possible explanation for the relatively low uptake of more cost effective longer acting reversible contraceptives and indicate that further education and training of doctors may be warranted. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Adaptive Neural Network Control for Nonlinear Hydraulic Servo-System with Time-Varying State Constraints

Directory of Open Access Journals (Sweden)

Shu-Min Lu

2017-01-01

Full Text Available An adaptive neural network control problem is addressed for a class of nonlinear hydraulic servo-systems with time-varying state constraints. In view of the low precision problem of the traditional hydraulic servo-system which is caused by the tracking errors surpassing appropriate bound, the previous works have shown that the constraint for the system is a good way to solve the low precision problem. Meanwhile, compared with constant constraints, the time-varying state constraints are more general in the actual systems. Therefore, when the states of the system are forced to obey bounded time-varying constraint conditions, the high precision tracking performance of the system can be easily realized. In order to achieve this goal, the time-varying barrier Lyapunov function (TVBLF is used to prevent the states from violating time-varying constraints. By the backstepping design, the adaptive controller will be obtained. A radial basis function neural network (RBFNN is used to estimate the uncertainties. Based on analyzing the stability of the hydraulic servo-system, we show that the error signals are bounded in the compacts sets; the time-varying state constrains are never violated and all singles of the hydraulic servo-system are bounded. The simulation and experimental results show that the tracking accuracy of system is improved and the controller has fast tracking ability and strong robustness.

5 CFR 330.206 - Job consideration.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Job consideration. 330.206 Section 330..., SELECTION, AND PLACEMENT (GENERAL) Reemployment Priority List (RPL) § 330.206 Job consideration. (a)(1) An eligible employee under § 330.203 is entitled to consideration for positions in the commuting area for...

ACCOUNTING FOR CONTINGENT CONSIDERATIONS IN BUSINESS COMBINATIONS

Directory of Open Access Journals (Sweden)

Gurgen KALASHYAN

2017-07-01

Full Text Available According to IFRS 3 Business Combinations contingent considerations must be included in the total consideration given for the acquired entity along with cash, other assets, ordinary or preference equity instruments, options, warrants. The contingent consideration is the determined amount which acquiring entity has to pay to acquired entity provided, that certain conditions will be fulfilled in the future. In case the provisions are not satisfied, we will get the situation when the amount of contingent consideration has been included in the total consideration given in the business combination, but in fact, the acquirer has not paid that amount. In its turn, the acquired entity will recognize the contingent consideration as a financial asset according to IFRS 9 Financial Instruments. In that case, it would be appropriately to recognize the contingent consideration as a contingent asset applying IAS 37. In the Article the author will explore the challenges of contingent consideration accounting and suggest the ways of solving the above mentioned problems.

Dimensionality-varied deep convolutional neural network for spectral-spatial classification of hyperspectral data

Science.gov (United States)

Qu, Haicheng; Liang, Xuejian; Liang, Shichao; Liu, Wanjun

2018-01-01

Many methods of hyperspectral image classification have been proposed recently, and the convolutional neural network (CNN) achieves outstanding performance. However, spectral-spatial classification of CNN requires an excessively large model, tremendous computations, and complex network, and CNN is generally unable to use the noisy bands caused by water-vapor absorption. A dimensionality-varied CNN (DV-CNN) is proposed to address these issues. There are four stages in DV-CNN and the dimensionalities of spectral-spatial feature maps vary with the stages. DV-CNN can reduce the computation and simplify the structure of the network. All feature maps are processed by more kernels in higher stages to extract more precise features. DV-CNN also improves the classification accuracy and enhances the robustness to water-vapor absorption bands. The experiments are performed on data sets of Indian Pines and Pavia University scene. The classification performance of DV-CNN is compared with state-of-the-art methods, which contain the variations of CNN, traditional, and other deep learning methods. The experiment of performance analysis about DV-CNN itself is also carried out. The experimental results demonstrate that DV-CNN outperforms state-of-the-art methods for spectral-spatial classification and it is also robust to water-vapor absorption bands. Moreover, reasonable parameters selection is effective to improve classification accuracy.

Hydraulic design considerations for a multi-tube sodium economizer

International Nuclear Information System (INIS)

Hassberger, J.A.; McConnell, P.M.; Olson, W.H.

1975-01-01

Operating experience gained from tests shows that flow distribution effects can severely affect the thermal performance of high effectiveness, low pressure drop sodium heat exchangers. It has been shown that design efforts for such devices must include proper consideration of potential causes of flow maldistribution within the tube bundle. Furthermore, it has been demonstrated that fairly simple design features can be capable of eliminating detrimental flow fields in the tube bundle

Revealed preference with limited consideration

NARCIS (Netherlands)

Demuynck, T.; Seel, C.

2014-01-01

We derive revealed preference tests for models where individuals use consideration sets to simplify their consumption problem. Our basic test provides necessary and sufficient conditions for consistency of observed choices with the existence of consideration set restrictions. The same conditions can

Design considerations for a large-scale image-based text search engine in historical manuscript collections

NARCIS (Netherlands)

Schomaker, Lambertus

2016-01-01

This article gives an overview of design considerations for a handwriting search engine based on pattern recognition and high-performance computing, “Monk”. In order to satisfy multiple and often conflicting technological requirements, an architecture is used which heavily relies on high-performance

A comparison of time-varying covariates in two smoking cessation interventions for cardiac patients

NARCIS (Netherlands)

Prenger, Hendrikje Cornelia; Pieterse, Marcel E.; Braakman-Jansen, Louise Marie Antoinette; Bolman, Catherine; Ruitenbeek-Wiggers, L.; de Vries, H.

2013-01-01

The aim of the study was to explore the time-varying contribution of social cognitive determinants of smoking cessation following an intervention on cessation. Secondary analyses were performed on data from two comparable randomized controlled trials on brief smoking cessation interventions for

Robust topology optimization accounting for spatially varying manufacturing errors

DEFF Research Database (Denmark)

Schevenels, M.; Lazarov, Boyan Stefanov; Sigmund, Ole

2011-01-01

This paper presents a robust approach for the design of macro-, micro-, or nano-structures by means of topology optimization, accounting for spatially varying manufacturing errors. The focus is on structures produced by milling or etching; in this case over- or under-etching may cause parts...... optimization problem is formulated in a probabilistic way: the objective function is defined as a weighted sum of the mean value and the standard deviation of the structural performance. The optimization problem is solved by means of a Monte Carlo method: in each iteration of the optimization scheme, a Monte...

Critical velocities in He II for independently varied superfluid and normal fluid velocities

International Nuclear Information System (INIS)

Baehr, M.L.

1984-01-01

Experiments were performed to measure the critical velocity in pure superflow and compare to the theoretical prediction; to measure the first critical velocity for independently varied superfluid and normal fluid velocities; and to investigate the propagation of the second critical velocity from the thermal counterflow line through the V/sub n/,-V/sub s/ quadrant. The experimental apparatus employed a thermal counterflow heater to adjust the normal fluid velocity, a fountain pump to vary the superfluid velocity, and a level sensing capacitor to measure the superfluid velocity. The results of the pure superfluid critical velocity measurements indicate that this velocity is temperature independent contrary to Schwarz's theory. It was found that the first critical velocity for independently varied V/sub n/ and V/sub s/ could be described by a linear function of V/sub n/ and was otherwise temperature independent. It was found that the second critical velocity could only be distinguished near the thermal counterflow line

Mendelian randomization analysis of a time-varying exposure for binary disease outcomes using functional data analysis methods.

Science.gov (United States)

Cao, Ying; Rajan, Suja S; Wei, Peng

2016-12-01

A Mendelian randomization (MR) analysis is performed to analyze the causal effect of an exposure variable on a disease outcome in observational studies, by using genetic variants that affect the disease outcome only through the exposure variable. This method has recently gained popularity among epidemiologists given the success of genetic association studies. Many exposure variables of interest in epidemiological studies are time varying, for example, body mass index (BMI). Although longitudinal data have been collected in many cohort studies, current MR studies only use one measurement of a time-varying exposure variable, which cannot adequately capture the long-term time-varying information. We propose using the functional principal component analysis method to recover the underlying individual trajectory of the time-varying exposure from the sparsely and irregularly observed longitudinal data, and then conduct MR analysis using the recovered curves. We further propose two MR analysis methods. The first assumes a cumulative effect of the time-varying exposure variable on the disease risk, while the second assumes a time-varying genetic effect and employs functional regression models. We focus on statistical testing for a causal effect. Our simulation studies mimicking the real data show that the proposed functional data analysis based methods incorporating longitudinal data have substantial power gains compared to standard MR analysis using only one measurement. We used the Framingham Heart Study data to demonstrate the promising performance of the new methods as well as inconsistent results produced by the standard MR analysis that relies on a single measurement of the exposure at some arbitrary time point. © 2016 WILEY PERIODICALS, INC.

Matching Value Propositions with Varied Customer Needs

DEFF Research Database (Denmark)

Heikka, Eija-Liisa; Frandsen, Thomas; Hsuan, Juliana

2018-01-01

Organizations seek to manage varied customer segments using varied value propositions. The ability of a knowledge-intensive business service (KIBS) provider to formulate value propositions into attractive offerings to varied customers becomes a competitive advantage. In this specific business based...... on often highly abstract service offerings, this requires the provider to have a clear overview of its knowledge and resources and how these can be configured to obtain the desired customization of services. Hence, the purpose of this paper is to investigate how a KIBS provider can match value propositions...... with varied customer needs utilizing service modularity. To accomplish this purpose, a qualitative multiple case study is organized around 5 projects allowing within-case and cross-case comparisons. Our findings describe how through the configuration of knowledge and resources a sustainable competitive...

CONSIDERATIONS REGARDING THE IMPLEMENTATION OF A PERFORMANCE MANAGEMENT SYSTEM IN PRIVATE HOSPITALS

Directory of Open Access Journals (Sweden)

Marian TAICU

2013-09-01

Full Text Available Obtaining performance in private hospitals require a proper management of costs and implementing a situation for performance monitoring. The implementation of a cost calculation method in hospitals is a complex process that must take into account the particularities of the activity in health care system. This paper presents a comparative analysis of four costing methods and a model of performance monitoring situation, adapted to the specific of the hospitals.

Coded throughput performance simulations for the time-varying satellite channel. M.S. Thesis

Science.gov (United States)

Han, LI

1995-01-01

The design of a reliable satellite communication link involving the data transfer from a small, low-orbit satellite to a ground station, but through a geostationary satellite, was examined. In such a scenario, the received signal power to noise density ratio increases as the transmitting low-orbit satellite comes into view, and then decreases as it then departs, resulting in a short-duration, time-varying communication link. The optimal values of the small satellite antenna beamwidth, signaling rate, modulation scheme and the theoretical link throughput (in bits per day) have been determined. The goal of this thesis is to choose a practical coding scheme which maximizes the daily link throughput while satisfying a prescribed probability of error requirement. We examine the throughput of both fixed rate and variable rate concatenated forward error correction (FEC) coding schemes for the additive white Gaussian noise (AWGN) channel, and then examine the effect of radio frequency interference (RFI) on the best coding scheme among them. Interleaving is used to mitigate degradation due to RFI. It was found that the variable rate concatenated coding scheme could achieve 74 percent of the theoretical throughput, equivalent to 1.11 Gbits/day based on the cutoff rate R(sub 0). For comparison, 87 percent is achievable for AWGN-only case.

Performance of mechanical ventilators at the patient's home: a multicentre quality control study.

Science.gov (United States)

Farré, R; Navajas, D; Prats, E; Marti, S; Guell, R; Montserrat, J M; Tebe, C; Escarrabill, J

2006-05-01

Quality control procedures vary considerably among the providers of equipment for home mechanical ventilation (HMV). A multicentre quality control survey of HMV was performed at the home of 300 patients included in the HMV programmes of four hospitals in Barcelona. It consisted of three steps: (1) the prescribed ventilation settings, the actual settings in the ventilator control panel, and the actual performance of the ventilator measured at home were compared; (2) the different ventilator alarms were tested; and (3) the effect of differences between the prescribed settings and the actual performance of the ventilator on non-programmed readmissions of the patient was determined. Considerable differences were found between actual, set, and prescribed values of ventilator variables; these differences were similar in volume and pressure preset ventilators. The percentage of patients with a discrepancy between the prescribed and actual measured main ventilator variable (minute ventilation or inspiratory pressure) of more than 20% and 30% was 13% and 4%, respectively. The number of ventilators with built in alarms for power off, disconnection, or obstruction was 225, 280 and 157, respectively. These alarms did not work in two (0.9%), 52 (18.6%) and eight (5.1%) ventilators, respectively. The number of non-programmed hospital readmissions in the year before the study did not correlate with the index of ventilator error. This study illustrates the current limitations of the quality control of HMV and suggests that improvements should be made to ensure adequate ventilator settings and correct ventilator performance and ventilator alarm operation.

Retrieving unobserved consideration sets from household panel data

NARCIS (Netherlands)

J.E.M. van Nierop; R. Paap (Richard); B. Bronnenberg; Ph.H.B.F. Franses (Philip Hans); M. Wedel (Michel)

2005-01-01

textabstractWe propose a new model to describe consideration, consisting of a multivariate probit model component for consideration and a multinomial probit model component for choice, given consideration. The approach allows one to analyze stated consideration set data, revealed consideration set

Chemical considerations in severe accident analysis

International Nuclear Information System (INIS)

Malinauskas, A.P.; Kress, T.S.

1988-01-01

The Reactor Safety Study presented the first systematic attempt to include fission product physicochemical effects in the determination of expected consequences of hypothetical nuclear reactor power plant accidents. At the time, however, the data base was sparse, and the treatment of fission product behavior was not entirely consistent or accurate. Considerable research has since been performed to identify and understand chemical phenomena that can occur in the course of a nuclear reactor accident, and how these phenomena affect fission product behavior. In this report, the current status of our understanding of the chemistry of fission products in severe core damage accidents is summarized and contrasted with that of the Reactor Safety Study

Theoretical and experimental investigations of efficient light coupling with spatially varied all dielectric striped waveguides

Science.gov (United States)

Yilmaz, Y. A.; Tandogan, S. E.; Hayran, Z.; Giden, I. H.; Turduev, M.; Kurt, H.

2017-07-01

Integrated photonic systems require efficient, compact, and broadband solutions for strong light coupling into and out of optical waveguides. The present work investigates an efficient optical power transferring the problem between optical waveguides having different widths of in/out terminals. We propose a considerably practical and feasible concept to implement and design an optical coupler by introducing gradually index modulation to the coupler section. The index profile of the coupler section is modulated with a Gaussian function by the help of striped waveguides. The effective medium theory is used to replace the original spatially varying index profile with dielectric stripes of a finite length/width having a constant effective refractive index. 2D and 3D finite-difference time-domain analyzes are utilized to investigate the sampling effect of the designed optical coupler and to determine the parameters that play a crucial role in enhancing the optical power transfer performance. Comparing the coupling performance of conventional benchmark adiabatic and butt couplers with the designed striped waveguide coupler, the corresponding coupling efficiency increases from approximately 30% to 95% over a wide frequency interval. In addition, to realize the realistic optical coupler appropriate to integrated photonic applications, the proposed structure is numerically designed on a silicon-on-insulator wafer. The implemented SOI platform based optical coupler operates in the telecom wavelength regime (λ = 1.55 μm), and the dimensions of the striped coupler are kept as 9.77 μm (along the transverse to propagation direction) and 7.69 μm (along the propagation direction) where the unit distance is fixed to be 465 nm. Finally, to demonstrate the operating design principle, the microwave experiments are conducted and the spot size conversion ratio as high as 7.1:1 is measured, whereas a coupling efficiency over 60% in the frequency range of 5.0-16.0 GHz has been also

NPP control command: Considerations for the future

International Nuclear Information System (INIS)

Trapp, J.P.

1998-01-01

Recent years have seen considerable improvements in the performance available from instrumentation, computerized data acquisition and processing systems, signal processing and related display processing systems. This progress implies the need for a complete rethink of the approach to future surveillance, control and protection systems for use with nuclear reactors, especially regarding new reactor systems. These new systems will in the future need to ensure full compatibility between safety improvements and the enhanced economic competitively of nuclear power. This paper presents an exercise covering the main functions that can as of now be considered for future applications in this field. (author)

Laser fusion target illumination optimization with consideration of the beam divergence

International Nuclear Information System (INIS)

Grzanna, J.; Schoennagel, H.

1982-09-01

Using a focusing system with a great focal length it is demonstrated that the radiation divergence considerably influences the illumination optimization. If the channel beam is composed of several single beams, there are two optimum illumination variants: the channel beam tangent and the single beam tangent illumination. Further, it is shown that the illumination channel distribution function can vary in the central region without any effect on the illumination uniformity. The deviation at the periphery is more critical. The most homogeneous illumination and favourable energy transfer would be obtained by low radiation divergence and optimum lateral and axial defocusing of the single beam imaging a suitable near-field intensity pattern on the target surface. It is emphasized that the estimation was made without considering the plasma parameters and the dynamic variation in time. (author)

Design of 2D time-varying vector fields.

Science.gov (United States)

Chen, Guoning; Kwatra, Vivek; Wei, Li-Yi; Hansen, Charles D; Zhang, Eugene

2012-10-01

Design of time-varying vector fields, i.e., vector fields that can change over time, has a wide variety of important applications in computer graphics. Existing vector field design techniques do not address time-varying vector fields. In this paper, we present a framework for the design of time-varying vector fields, both for planar domains as well as manifold surfaces. Our system supports the creation and modification of various time-varying vector fields with desired spatial and temporal characteristics through several design metaphors, including streamlines, pathlines, singularity paths, and bifurcations. These design metaphors are integrated into an element-based design to generate the time-varying vector fields via a sequence of basis field summations or spatial constrained optimizations at the sampled times. The key-frame design and field deformation are also introduced to support other user design scenarios. Accordingly, a spatial-temporal constrained optimization and the time-varying transformation are employed to generate the desired fields for these two design scenarios, respectively. We apply the time-varying vector fields generated using our design system to a number of important computer graphics applications that require controllable dynamic effects, such as evolving surface appearance, dynamic scene design, steerable crowd movement, and painterly animation. Many of these are difficult or impossible to achieve via prior simulation-based methods. In these applications, the time-varying vector fields have been applied as either orientation fields or advection fields to control the instantaneous appearance or evolving trajectories of the dynamic effects.

PCA-based detection of damage in time-varying systems

Science.gov (United States)

Bellino, A.; Fasana, A.; Garibaldi, L.; Marchesiello, S.

2010-10-01

When performing Structural Health Monitoring, it is well known that the natural frequencies do not depend only on the damage but also on environmental conditions, such as temperature and humidity. The Principal Component Analysis is used to take this problem into account, because it allows eliminating the effect of external factors. The purpose of the present work is to show that this technique can be successfully used not only for time-invariant systems, but also for time-varying ones. Referring to the latter, one of the most studied systems which shows these characteristics is the bridge with crossing loads, such as the case of the railway bridge studied in present paper; in this case, the mass and the velocity of the train can be considered as "environmental" factors.This paper, after a brief description of the PCA method and one example of its application on time-invariant systems, presents the great potentialities of the methodology when applied to time-varying systems. The results show that this method is able to better detect the presence of damage and also to properly distinguish among different levels of crack depths.

Inclusion and Implementation of Socio-Economic Considerations in GMO Regulations: Needs and Recommendations

Directory of Open Access Journals (Sweden)

Rosa Binimelis

2016-01-01

Full Text Available Socio-economic considerations are included in the regulatory frameworks on genetically modified organisms (GMOs of many countries. This is a reflection of an increasing interest in and recognition of the necessity to consider a broader range of issues when conducting a GMO risk assessment. At the same time, there are discussions about how socio-economic considerations can be identified and how their assessment can be carried out. To provide an understanding of the advances achieved so far, we describe the state of the art of existing biosafety institutional frameworks, legislation and policies with provisions on socio-economic considerations. We analyse the scope of the socio-economic considerations that have been included, the methodological options taken and the role of participatory processes and stakeholders involvement in the GMO-related decision-making. Since many of the countries that have legislation for assessing socio-economic considerations lack implementation experience, we provide an analysis of how implementation has evolved in Norway with the intention to illustrate that the inclusion of socio-economic considerations might be based on a learning process. Norway was the first country to include broader issues in its GMO assessment process, and is at present one of the countries with the most experience on implementation of these issues. Finally, we emphasise that there is a great need for training on how to perform assessments of socio-economic considerations, as well as reflection on possible ways for inclusion of participatory processes.

Nonlinearly Activated Neural Network for Solving Time-Varying Complex Sylvester Equation.

Science.gov (United States)

Li, Shuai; Li, Yangming

2013-10-28

The Sylvester equation is often encountered in mathematics and control theory. For the general time-invariant Sylvester equation problem, which is defined in the domain of complex numbers, the Bartels-Stewart algorithm and its extensions are effective and widely used with an O(n³) time complexity. When applied to solving the time-varying Sylvester equation, the computation burden increases intensively with the decrease of sampling period and cannot satisfy continuous realtime calculation requirements. For the special case of the general Sylvester equation problem defined in the domain of real numbers, gradient-based recurrent neural networks are able to solve the time-varying Sylvester equation in real time, but there always exists an estimation error while a recently proposed recurrent neural network by Zhang et al [this type of neural network is called Zhang neural network (ZNN)] converges to the solution ideally. The advancements in complex-valued neural networks cast light to extend the existing real-valued ZNN for solving the time-varying real-valued Sylvester equation to its counterpart in the domain of complex numbers. In this paper, a complex-valued ZNN for solving the complex-valued Sylvester equation problem is investigated and the global convergence of the neural network is proven with the proposed nonlinear complex-valued activation functions. Moreover, a special type of activation function with a core function, called sign-bi-power function, is proven to enable the ZNN to converge in finite time, which further enhances its advantage in online processing. In this case, the upper bound of the convergence time is also derived analytically. Simulations are performed to evaluate and compare the performance of the neural network with different parameters and activation functions. Both theoretical analysis and numerical simulations validate the effectiveness of the proposed method.

Ethical Considerations in Technology Transfer.

Science.gov (United States)

Froehlich, Thomas J.

1991-01-01

Examines ethical considerations involved in the transfer of appropriate information technology to less developed countries. Approaches to technology are considered; two philosophical frameworks for studying ethical considerations are discussed, i.e., the Kantian approach and the utilitarian perspective by John Stuart Mill; and integration of the…

Consideration of Learning Orientations as an Application of Achievement Goals in Evaluating Life Science Majors in Introductory Physics

Science.gov (United States)

Mason, Andrew J.; Bertram, Charles A.

2018-01-01

When considering performing an Introductory Physics for Life Sciences course transformation for one's own institution, life science majors' achievement goals are a necessary consideration to ensure the pedagogical transformation will be effective. However, achievement goals are rarely an explicit consideration in physics education research topics…

Gas separation performance of tapered cascade with membrane

International Nuclear Information System (INIS)

Ohno, Masayoshi; Morisue, Tetsuo; Ozaki, Osamu; Miyauchi, Terukatsu.

1978-01-01

Membrane gas separation cascades are analyzed at steady state. The method of calculating the flow rate and concentration profiles in the cascade are examined, using formulas expressing the various membrane separation cell characteristics. The method adopted is applicable to relatively high concentrations and separation factors. Considerations are further given on the steady state performance of four theoretical forms of cascade: (a) with common value of cut for all stages, (b) with symmetric separation cells, (c) with no mixing at the junction at each stage, and (d) ideal cascade. The analysis showed that, with membrane cells, the ideal cascade would have a pressure ratio varying from stage to stage. The symmetric separation cascade would provide a separation performance lower than the ideal cascade on account of the mixing at the junctions of streams possessing different concentrations, whereas the cut and separation factor of the no-mixing cascade requiring minimum membrane area exhibits zig-zag curves when plotted against stage number. Both these circumstances contribute to the lower separation performance obtained with these two forms as compared with the ideal cascade, and results in larger total membrane area; but these semi-ideal forms retain the advantage of easy practical treatment with their pressure ratio common to all stages. (auth.)

Realistic control considerations for electromagnetically levitated urban transit vehicles

Energy Technology Data Exchange (ETDEWEB)

Billing, J R

1976-04-01

A discussion is given of realistic control considerations of suspension dynamics and vehicle/guideway interaction for electromagnetically-levitated urban transit vehicles in the context of revenue applications. The emphasis is on safety, reliability, and maintainability rather than performance. An example urban transit system is described, and the following considerations of dynamics and control are examined: stability, magnet force requirements, magnet airgap requirements, vehicle ride, and component failures. It is shown that it is a formidable problem to ensure suspension stability under all conditions; that operation on curves is a critical magnet and control system design case; that operation of the magnets in the non-linear regime is unavoidable and that component failures will be a major problem. However, good vehicle ride is to be expected. It is concluded that magnetic levitation suspension technology requires substantial development effort before it can be considered suitable for revenue operation.

Ozone sensitivity to varying greenhouse gases and ozone-depleting substances in CCMI-1 simulations

Directory of Open Access Journals (Sweden)

O. Morgenstern

2018-01-01

Full Text Available Ozone fields simulated for the first phase of the Chemistry-Climate Model Initiative (CCMI-1 will be used as forcing data in the 6th Coupled Model Intercomparison Project. Here we assess, using reference and sensitivity simulations produced for CCMI-1, the suitability of CCMI-1 model results for this process, investigating the degree of consistency amongst models regarding their responses to variations in individual forcings. We consider the influences of methane, nitrous oxide, a combination of chlorinated or brominated ozone-depleting substances, and a combination of carbon dioxide and other greenhouse gases. We find varying degrees of consistency in the models' responses in ozone to these individual forcings, including some considerable disagreement. In particular, the response of total-column ozone to these forcings is less consistent across the multi-model ensemble than profile comparisons. We analyse how stratospheric age of air, a commonly used diagnostic of stratospheric transport, responds to the forcings. For this diagnostic we find some salient differences in model behaviour, which may explain some of the findings for ozone. The findings imply that the ozone fields derived from CCMI-1 are subject to considerable uncertainties regarding the impacts of these anthropogenic forcings. We offer some thoughts on how to best approach the problem of generating a consensus ozone database from a multi-model ensemble such as CCMI-1.

Ozone Sensitivity to Varying Greenhouse Gases and Ozone-Depleting Substances in CCMI-1 Simulations

Science.gov (United States)

Morgenstern, Olaf; Stone, Kane A.; Schofield, Robyn; Akiyoshi, Hideharu; Yamashita, Yousuke; Kinnison, Douglas E.; Garcia, Rolando R.; Sudo, Kengo; Plummer, David A.; Scinocca, John;

Food choice considerations among American Indians living in rural Oklahoma: The THRIVE study.

Science.gov (United States)

Wetherill, Marianna S; Williams, Mary B; Hartwell, Micah L; Salvatore, Alicia L; Jacob, Tvli; Cannady, Tamela K; Standridge, Joy; Fox, Jill; Spiegel, Jennifer; Anderson, Natia; Jernigan, Valarie Blue Bird

2018-05-17

In rural American Indian (AI) communities, access to affordable, healthy foods is often limited. Understanding AI food choice considerations when selecting foods, such as sensory appeal, cost, or health, is an important yet understudied topic for eliminating persistent AI health disparities. In partnership with the Chickasaw Nation and Choctaw Nation of Oklahoma, we administered a modified version of the Food Choice Values (FCV) Questionnaire to a cross-sectional sample of 83 AI patrons shopping at tribally-owned convenience stores ≥3 times per week. The FCV Questionnaire uses 25 items to assess eight FCV subscales related to buying and eating food, including sensory appeal; safety; accessibility; convenience; health/weight control; organic; tradition; and comfort. We compared mean scores for each FCV subscale by demographic groups using t-tests and ANOVA. We used confirmatory factor analysis (CFA) to examine how well the data from this population fit FCV subscale constructs. We then used cluster analysis, MANOVA, and discriminant analysis to characterize distinct segments of the population based on patterns of FCV endorsement. Appeal, safety, and access FCVs were most strongly endorsed across the sample. Prioritization of FCVs varied by age, gender, income, and education. Our cluster analysis identified four groups, or segments, each with distinct patterns of FCV endorsement: limited endorsement of any FCVs (23.3%); safety and sensory appeal (32.9%); health/weight control (17.8%); and broad endorsement of FCVs (26.0%). These groups varied by age and employment status. Findings from this analysis informed the design and implementation of a healthy retail intervention comprised of new healthful foods and beverages, product placement and marketing strategies within four tribally-owned and operated convenience stores. Public health interventions aimed at reducing nutrition-related disparities in rural AI populations may benefit from assessing food choice

Effect of feeding varying levels of corn cob meal on the performance ...

African Journals Online (AJOL)

One hundred and twenty (120) Anak broiler birds were used to study the effect offeeding Corn cob meal on the growth performance, organ weights and serum metabolites. The birds were divided into 4 treatment groups. Four finisher diets were formulated with 0, 5, 10 and 15% Corn cob meal inclusion and fed to the birds in ...

A study on the effect of varying sequence of lab performance skills on lab performance of high school physics students

Science.gov (United States)

Bournia-Petrou, Ethel A.

The main goal of this investigation was to study how student rank in class, student gender and skill sequence affect high school students' performance on the lab skills involved in a laboratory-based inquiry task in physics. The focus of the investigation was the effect of skill sequence as determined by the particular task. The skills considered were: Hypothesis, Procedure, Planning, Data, Graph, Calculations and Conclusion. Three physics lab tasks based on the simple pendulum concept were administered to 282 Regents physics high school students. The reliability of the designed tasks was high. Student performance was evaluated on individual student written responses and a scoring rubric. The tasks had high discrimination power and were of moderate difficulty (65%). It was found that, student performance was weak on Conclusion (42%), Hypothesis (48%), and Procedure (51%), where the numbers in parentheses represent the mean as a percentage of the maximum possible score. Student performance was strong on Calculations (91%), Data (82%), Graph (74%) and Plan (68%). Out of all seven skills, Procedure had the strongest correlation (.73) with the overall task performance. Correlation analysis revealed some strong relationships among the seven skills which were grouped in two distinct clusters: Hypothesis, Procedure and Plan belong to one, and Data, Graph, Calculations, and Conclusion belong to the other. This distinction may indicate different mental processes at play within each skill cluster. The effect of student rank was not statistically significant according to the MANOVA results due to the large variation of rank levels among the participating schools. The effect of gender was significant on the entire test because of performance differences on Calculations and Graph, where male students performed better than female students. Skill sequence had a significant effect on the skills of Procedure, Plan, Data and Conclusion. Students are rather weak in proposing a

Time-Varying Dynamic Properties of Offshore Wind Turbines Evaluated by Modal Testing

DEFF Research Database (Denmark)

Damgaard, Mads; Andersen, J. K. F.; Ibsen, Lars Bo

2014-01-01

resonance of the wind turbine structure. In this paper, free vibration tests and a numerical Winkler type approach are used to evaluate the dynamic properties of a total of 30 offshore wind turbines located in the North Sea. Analyses indicate time-varying eigenfrequencies and damping ratios of the lowest...... structural eigenmode. Isolating the oscillation oil damper performance, moveable seabed conditions may lead to the observed time dependency....

32 CFR 643.104 - Consideration.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Consideration. 643.104 Section 643.104 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE Permits § 643.104 Consideration. (a) Permits are usually granted on a rent-free basis. (b) The Army is...

Design of 2D Time-Varying Vector Fields

KAUST Repository

Chen, Guoning

2012-10-01

Design of time-varying vector fields, i.e., vector fields that can change over time, has a wide variety of important applications in computer graphics. Existing vector field design techniques do not address time-varying vector fields. In this paper, we present a framework for the design of time-varying vector fields, both for planar domains as well as manifold surfaces. Our system supports the creation and modification of various time-varying vector fields with desired spatial and temporal characteristics through several design metaphors, including streamlines, pathlines, singularity paths, and bifurcations. These design metaphors are integrated into an element-based design to generate the time-varying vector fields via a sequence of basis field summations or spatial constrained optimizations at the sampled times. The key-frame design and field deformation are also introduced to support other user design scenarios. Accordingly, a spatial-temporal constrained optimization and the time-varying transformation are employed to generate the desired fields for these two design scenarios, respectively. We apply the time-varying vector fields generated using our design system to a number of important computer graphics applications that require controllable dynamic effects, such as evolving surface appearance, dynamic scene design, steerable crowd movement, and painterly animation. Many of these are difficult or impossible to achieve via prior simulation-based methods. In these applications, the time-varying vector fields have been applied as either orientation fields or advection fields to control the instantaneous appearance or evolving trajectories of the dynamic effects. © 1995-2012 IEEE.

Design of 2D Time-Varying Vector Fields

KAUST Repository

Chen, Guoning; Kwatra, Vivek; Wei, Li-Yi; Hansen, Charles D.; Zhang, Eugene

2012-01-01

Design of time-varying vector fields, i.e., vector fields that can change over time, has a wide variety of important applications in computer graphics. Existing vector field design techniques do not address time-varying vector fields. In this paper, we present a framework for the design of time-varying vector fields, both for planar domains as well as manifold surfaces. Our system supports the creation and modification of various time-varying vector fields with desired spatial and temporal characteristics through several design metaphors, including streamlines, pathlines, singularity paths, and bifurcations. These design metaphors are integrated into an element-based design to generate the time-varying vector fields via a sequence of basis field summations or spatial constrained optimizations at the sampled times. The key-frame design and field deformation are also introduced to support other user design scenarios. Accordingly, a spatial-temporal constrained optimization and the time-varying transformation are employed to generate the desired fields for these two design scenarios, respectively. We apply the time-varying vector fields generated using our design system to a number of important computer graphics applications that require controllable dynamic effects, such as evolving surface appearance, dynamic scene design, steerable crowd movement, and painterly animation. Many of these are difficult or impossible to achieve via prior simulation-based methods. In these applications, the time-varying vector fields have been applied as either orientation fields or advection fields to control the instantaneous appearance or evolving trajectories of the dynamic effects. © 1995-2012 IEEE.

Performance Testing of Suspension Plasma Sprayed Thermal Barrier Coatings Produced with Varied Suspension Parameters

Directory of Open Access Journals (Sweden)

Nicholas Curry

2015-07-01

Full Text Available Suspension plasma spraying has become an emerging technology for the production of thermal barrier coatings for the gas turbine industry. Presently, though commercial systems for coating production are available, coatings remain in the development stage. Suitable suspension parameters for coating production remain an outstanding question and the influence of suspension properties on the final coatings is not well known. For this study, a number of suspensions were produced with varied solid loadings, powder size distributions and solvents. Suspensions were sprayed onto superalloy substrates coated with high velocity air fuel (HVAF -sprayed bond coats. Plasma spray parameters were selected to generate columnar structures based on previous experiments and were maintained at constant to discover the influence of the suspension behavior on coating microstructures. Testing of the produced thermal barrier coating (TBC systems has included thermal cyclic fatigue testing and thermal conductivity analysis. Pore size distribution has been characterized by mercury infiltration porosimetry. Results show a strong influence of suspension viscosity and surface tension on the microstructure of the produced coatings.

Defining poor and optimum performance in an IVF programme.

Science.gov (United States)

Castilla, Jose A; Hernandez, Juana; Cabello, Yolanda; Lafuente, Alejandro; Pajuelo, Nuria; Marqueta, Javier; Coroleu, Buenaventura

2008-01-01

At present there is considerable interest in healthcare administration, among professionals and among the general public concerning the quality of programmes of assisted reproduction. There exist various methods for comparing and analysing the results of clinical activity, with graphical methods being the most commonly used for this purpose. As yet, there is no general consensus as to how the poor performance (PP) or optimum performance (OP) of assisted reproductive technologies should be defined. Data from the IVF/ICSI register of the Spanish Fertility Society were used to compare and analyse different definitions of PP or OP. The primary variable best reflecting the quality of an IVF/ICSI programme was taken to be the percentage of singleton births per IVF/ICSI cycle initiated. Of the 75 infertility clinics that took part in the SEF-2003 survey, data on births were provided by 58. A total of 25 462 cycles were analysed. The following graphical classification methods were used: ranking of the proportion of singleton births per cycles started in each centre (league table), Shewhart control charts, funnel plots, best and worst-case scenarios and state of the art methods. The clinics classified as producing PP or OP varied considerably depending on the classification method used. Only three were rated as providing 'PP' or 'OP' by all methods, unanimously. Another four clinics were classified as 'poor' or 'optimum' by all the methods except one. On interpreting the results derived from IVF/ICSI centres, it is essential to take into account the characteristics of the method used for this purpose.

Time-varying Crash Risk

DEFF Research Database (Denmark)

Christoffersen, Peter; Feunoua, Bruno; Jeon, Yoontae

We estimate a continuous-time model with stochastic volatility and dynamic crash probability for the S&P 500 index and find that market illiquidity dominates other factors in explaining the stock market crash risk. While the crash probability is time-varying, its dynamic depends only weakly on re...

Time varying voltage combustion control and diagnostics sensor

Science.gov (United States)

Chorpening, Benjamin T [Morgantown, WV; Thornton, Jimmy D [Morgantown, WV; Huckaby, E David [Morgantown, WV; Fincham, William [Fairmont, WV

2011-04-19

A time-varying voltage is applied to an electrode, or a pair of electrodes, of a sensor installed in a fuel nozzle disposed adjacent the combustion zone of a continuous combustion system, such as of the gas turbine engine type. The time-varying voltage induces a time-varying current in the flame which is measured and used to determine flame capacitance using AC electrical circuit analysis. Flame capacitance is used to accurately determine the position of the flame from the sensor and the fuel/air ratio. The fuel and/or air flow rate (s) is/are then adjusted to provide reduced flame instability problems such as flashback, combustion dynamics and lean blowout, as well as reduced emissions. The time-varying voltage may be an alternating voltage and the time-varying current may be an alternating current.

Identifiability of Additive, Time-Varying Actuator and Sensor Faults by State Augmentation

Science.gov (United States)

Upchurch, Jason M.; Gonzalez, Oscar R.; Joshi, Suresh M.

2014-01-01

Recent work has provided a set of necessary and sucient conditions for identifiability of additive step faults (e.g., lock-in-place actuator faults, constant bias in the sensors) using state augmentation. This paper extends these results to an important class of faults which may affect linear, time-invariant systems. In particular, the faults under consideration are those which vary with time and affect the system dynamics additively. Such faults may manifest themselves in aircraft as, for example, control surface oscillations, control surface runaway, and sensor drift. The set of necessary and sucient conditions presented in this paper are general, and apply when a class of time-varying faults affects arbitrary combinations of actuators and sensors. The results in the main theorems are illustrated by two case studies, which provide some insight into how the conditions may be used to check the theoretical identifiability of fault configurations of interest for a given system. It is shown that while state augmentation can be used to identify certain fault configurations, other fault configurations are theoretically impossible to identify using state augmentation, giving practitioners valuable insight into such situations. That is, the limitations of state augmentation for a given system and configuration of faults are made explicit. Another limitation of model-based methods is that there can be large numbers of fault configurations, thus making identification of all possible configurations impractical. However, the theoretical identifiability of known, credible fault configurations can be tested using the theorems presented in this paper, which can then assist the efforts of fault identification practitioners.

In situ metal ion contamination and the effects on proton exchange membrane fuel cell performance

Science.gov (United States)

Sulek, Mark; Adams, Jim; Kaberline, Steve; Ricketts, Mark; Waldecker, James R.

Automotive fuel cell technology has made considerable progress, and hydrogen fuel cell vehicles are regarded as a possible long-term solution to reduce carbon dioxide emissions, reduce fossil fuel dependency and increase energy efficiency. Even though great strides have been made, durability is still an issue. One key challenge is controlling MEA contamination. Metal ion contamination within the membrane and the effects on fuel cell performance were investigated. Given the possible benefits of using stainless steel or aluminum for balance-of-plant components or bipolar plates, cations of Al, Fe, Ni and Cr were studied. Membranes were immersed in metal sulfide solutions of varying concentration and then assembled into fuel cell MEAs tested in situ. The ranking of the four transition metals tested in terms of the greatest reduction in fuel cell performance was: Al 3+ ≫ Fe 2+ > Ni 2+, Cr 3+. For iron-contaminated membranes, no change in cell performance was detected until the membrane conductivity loss was greater than approximately 15%.

The effects of klapskate hinge position on push-off performance: a simulation study.

Science.gov (United States)

Houdijk, Han; Bobbert, Maarten F; De Koning, Jos J; De Groot, Gert

2003-12-01

The introduction of the klapskate in speed skating confronts skaters with the question of how to adjust the position of the hinge in order to maximize performance. The purpose of this study was to reveal the constraint that klapskate hinge position imposes on push-off performance in speed skating. For this purpose, a model of the musculoskeletal system was designed to simulate a simplified, two-dimensional skating push off. To capture the essence of a skating push off, this model performed a one-leg vertical jump, from a frictionless surface, while keeping its trunk horizontally. In this model, klapskate hinge position was varied by varying the length of the foot segment between 115 and 300 mm. With each foot length, an optimal control solution was found that resulted in the maximal amount of vertical kinetic and potential energy of the body's center of mass at take off (Weff). Foot length was shown to considerably affect push-off performance. Maximal Weff was obtained with a foot length of 185 mm and decreased by approximately 25% at either foot length of 115 mm and 300 mm. The reason for this decrease was that foot length affected the onset and control of foot rotation. This resulted in a distortion of the pattern of leg segment rotations and affected muscle work (Wmus) and the efficacy ratio (Weff/Wmus) of the entire leg system. Despite its simplicity, the model very well described and explained the effects of klapskate hinge position on push off performance that have been observed in speed-skating experiments. The simplicity of the model, however, does not allow quantitative analyses of optimal klapskate hinge position for speed-skating practice.

Human factors considerations in control room modernization: Trends and personnel performance issues

International Nuclear Information System (INIS)

O'Hara, J.; Stubler, B.; Kramer, J.

1997-01-01

Advanced human-system interface (HSI) technology is being integrated into existing nuclear plants as part of plant modifications and upgrades. The result of this trend is that hybrid HSIs are created, i.e., HSIs containing a mixture of conventional (analog) and advanced (digital) technology. The purpose of the present research is to define the potential effects of hybrid HSIs on personnel performance and plant safety and to develop human factors guidance for safety reviews of them where necessary. In support of this objective, human factors topics associated with hybrid HSIs were identified. A human performance topic is an aspect of hybrid HSIs, such as a design or implementation feature, for which human performance concerns were identified. The topics were then evaluated for their potential significance to plant safety. Twelve topics were identified as potentially safety significant issues, i.e., their human performance concerns have the potential to compromise plant safety. The issues were then prioritized and a subset was selected for design review guidance development. 6 refs

Detection of dynamically varying interaural time differences

DEFF Research Database (Denmark)

Kohlrausch, Armin; Le Goff, Nicolas; Breebaart, Jeroen

2010-01-01

of fringes surrounding the probe is equal to the addition of the effects of the individual fringes. In this contribution, we present behavioral data for the same experimental condition, called dynamically varying ITD detection, but for a wider range of probe and fringe durations. Probe durations varied...

Synthetic vision systems: operational considerations simulation experiment

Science.gov (United States)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-04-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents / accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Synthetic Vision Systems - Operational Considerations Simulation Experiment

Science.gov (United States)

Kramer, Lynda J.; Williams, Steven P.; Bailey, Randall E.; Glaab, Louis J.

2007-01-01

Synthetic vision is a computer-generated image of the external scene topography that is generated from aircraft attitude, high-precision navigation information, and data of the terrain, obstacles, cultural features, and other required flight information. A synthetic vision system (SVS) enhances this basic functionality with real-time integrity to ensure the validity of the databases, perform obstacle detection and independent navigation accuracy verification, and provide traffic surveillance. Over the last five years, NASA and its industry partners have developed and deployed SVS technologies for commercial, business, and general aviation aircraft which have been shown to provide significant improvements in terrain awareness and reductions in the potential for Controlled-Flight-Into-Terrain incidents/accidents compared to current generation cockpit technologies. It has been hypothesized that SVS displays can greatly improve the safety and operational flexibility of flight in Instrument Meteorological Conditions (IMC) to a level comparable to clear-day Visual Meteorological Conditions (VMC), regardless of actual weather conditions or time of day. An experiment was conducted to evaluate SVS and SVS-related technologies as well as the influence of where the information is provided to the pilot (e.g., on a Head-Up or Head-Down Display) for consideration in defining landing minima based upon aircraft and airport equipage. The "operational considerations" evaluated under this effort included reduced visibility, decision altitudes, and airport equipage requirements, such as approach lighting systems, for SVS-equipped aircraft. Subjective results from the present study suggest that synthetic vision imagery on both head-up and head-down displays may offer benefits in situation awareness; workload; and approach and landing performance in the visibility levels, approach lighting systems, and decision altitudes tested.

Contemporary considerations in concurrent endoscopic sinus surgery and rhinoplasty.

Science.gov (United States)

Steele, Toby O; Gill, Amarbir; Tollefson, Travis T

2018-06-11

Characterize indications, perioperative considerations, clinical outcomes and complications for concurrent endoscopic sinus surgery (ESS) and rhinoplasty. Chronic rhinosinusitis and septal deviation with or without inferior turbinate hypertrophy independently impair patient-reported quality of life. Guidelines implore surgeons to include endoscopy to accurately evaluate patient symptoms. Complication rates parallel those of either surgery (ESS and rhinoplasty) alone and are not increased when performed concurrently. Operative time is generally longer for joint surgeries. Patient satisfaction rates are high. Concurrent functional and/or cosmetic rhinoplasty and ESS is a safe endeavor to perform in a single operative setting and most outcomes data suggest excellent patient outcomes. Additional studies that include patient-reported outcome measures are needed.

Star Excursion Balance Test Performance Varies by Sport in Healthy Division I Collegiate Athletes.

Science.gov (United States)

Stiffler, Mikel R; Sanfilippo, Jennifer L; Brooks, M Alison; Heiderscheit, Bryan C

2015-10-01

Cross-sectional. To describe performance and asymmetry on the Star Excursion Balance Test (SEBT) by sex and sport, and to determine if differences exist within a collegiate athlete population. Performance on the SEBT may differ between sexes and levels of competition, though the results of previous studies have been inconsistent. Investigation of performance and asymmetry differences between sports is limited. Sex- and sport-specific reference values likely need to be determined to best assess SEBT performance. Performance on the SEBT was retrospectively reviewed in 393 healthy National Collegiate Athletic Association Division I collegiate athletes from 8 sports. Means, standard deviations, and 95% confidence intervals were calculated for all variables. Normalized reach distance (percent limb length) and asymmetry between limbs were compared for the anterior (ANT), posterolateral (PL), and posteromedial (PM) directions and for the composite (COMP) score using a 2-way analysis of variance (ANOVA) of sex by sport, and a 1-way ANOVA to separately compare sports within each sex. Average normalized reach distance ranged from 62% to 69%, 84% to 97%, and 99% to 113% in the ANT, PL, and PM directions, respectively, and from 82% to 92% in the COMP score. Normalized asymmetry ranged from 3% to 4%, 5% to 8%, and 5% to 6% in the ANT, PL, and PM directions, respectively. A significant sex-by-sport interaction (P = .039) was observed in the ANT direction, with a sex effect for soccer players (Psport.

Advanced LBB methodology and considerations

International Nuclear Information System (INIS)

Olson, R.; Rahman, S.; Scott, P.

1997-01-01

LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper

Advanced LBB methodology and considerations

Energy Technology Data Exchange (ETDEWEB)

Olson, R.; Rahman, S.; Scott, P. [Battelle, Columbus, OH (United States)] [and others

1997-04-01

LBB applications have existed in many industries and more recently have been applied in the nuclear industry under limited circumstances. Research over the past 10 years has evolved the technology so that more advanced consideration of LBB can now be given. Some of the advanced considerations for nuclear plants subjected to seismic loading evaluations are summarized in this paper.

Financial gains and risks in pay-for-performance bonus algorithms.

Science.gov (United States)

Cromwell, Jerry; Drozd, Edward M; Smith, Kevin; Trisolini, Michael

2007-01-01

Considerable attention has been given to evidence-based process indicators associated with quality of care, while much less attention has been given to the structure and key parameters of the various pay-for-performance (P4P) bonus and penalty arrangements using such measures. In this article we develop a general model of quality payment arrangements and discuss the advantages and disadvantages of the key parameters. We then conduct simulation analyses of four general P4P payment algorithms by varying seven parameters, including indicator weights, indicator intercorrelation, degree of uncertainty regarding intervention effectiveness, and initial baseline rates. Bonuses averaged over several indicators appear insensitive to weighting, correlation, and the number of indicators. The bonuses are sensitive to disease manager perceptions of intervention effectiveness, facing challenging targets, and the use of actual-to-target quality levels versus rates of improvement over baseline.

Varying coefficient subdistribution regression for left-truncated semi-competing risks data.

Science.gov (United States)

Li, Ruosha; Peng, Limin

2014-10-01

Semi-competing risks data frequently arise in biomedical studies when time to a disease landmark event is subject to dependent censoring by death, the observation of which however is not precluded by the occurrence of the landmark event. In observational studies, the analysis of such data can be further complicated by left truncation. In this work, we study a varying co-efficient subdistribution regression model for left-truncated semi-competing risks data. Our method appropriately accounts for the specifical truncation and censoring features of the data, and moreover has the flexibility to accommodate potentially varying covariate effects. The proposed method can be easily implemented and the resulting estimators are shown to have nice asymptotic properties. We also present inference, such as Kolmogorov-Smirnov type and Cramér Von-Mises type hypothesis testing procedures for the covariate effects. Simulation studies and an application to the Denmark diabetes registry demonstrate good finite-sample performance and practical utility of the proposed method.

A compensation controller based on a regional pole-assignment method for AMD control systems with a time-varying delay

Science.gov (United States)

Li, Zuohua; Chen, Chaojun; Teng, Jun; Wang, Ying

2018-04-01

Active mass damper/driver (AMD) control system has been proposed as an effective tool for high-rise buildings to resist strong dynamic loads. However, such disadvantage as time-varying delay in AMD control systems impedes their application in practices. Time-varying delay, which has an effect on the performance and stability of single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems, is considered in the paper. In addition, a new time-delay compensation controller based on regional pole-assignment method is presented. To verify its effectiveness, the proposed method is applied to a numerical example of a ten-storey frame and an experiment of a single span four-storey steel frame. Both numerical and experimental results demonstrate that the proposed method can enhance the performances of an AMD control system with time-varying delays.

Varying coefficients model with measurement error.

Science.gov (United States)

Li, Liang; Greene, Tom

2008-06-01

We propose a semiparametric partially varying coefficient model to study the relationship between serum creatinine concentration and the glomerular filtration rate (GFR) among kidney donors and patients with chronic kidney disease. A regression model is used to relate serum creatinine to GFR and demographic factors in which coefficient of GFR is expressed as a function of age to allow its effect to be age dependent. GFR measurements obtained from the clearance of a radioactively labeled isotope are assumed to be a surrogate for the true GFR, with the relationship between measured and true GFR expressed using an additive error model. We use locally corrected score equations to estimate parameters and coefficient functions, and propose an expected generalized cross-validation (EGCV) method to select the kernel bandwidth. The performance of the proposed methods, which avoid distributional assumptions on the true GFR and residuals, is investigated by simulation. Accounting for measurement error using the proposed model reduced apparent inconsistencies in the relationship between serum creatinine and GFR among different clinical data sets derived from kidney donor and chronic kidney disease source populations.

Implementation of ANN on CCHP system to predict trigeneration performance with consideration of various operative factors

International Nuclear Information System (INIS)

Anvari, Simin; Taghavifar, Hadi; Saray, Rahim Khoshbakhti; Khalilarya, Shahram; Jafarmadar, Samad

2015-01-01

Highlights: • ANN modeling tool was implemented on the CCHP system. • The best ANN topology was detected 10–8–9 with Levenberg–Marquadt algorithm. • The system is more sensitive of CC outlet temperature and turbine isentropic efficiency. • The lowest RMSE = 3.13e−5 and the best R 2 = 0.999 is related to lambda and second law efficiency terms, respectively. - Abstract: A detailed investigation was aimed based on numerical thermodynamic survey and artificial neural network (ANN) modeling of the trigeneration system. The results are presented in two pivotal frameworks namely the sensitivity analysis and ANN prediction capability of proposed modeling. The underlying operative parameters were chosen as input parameters from different cycles and components, while the exergy efficiency, exergy loss, coefficient of performance, heating load exergy, lambda, gas turbine power, exergy destruction, actual outlet air compressor temperature, and heat recovery gas steam generator (HRSG) outlet temperature were taken as objective output parameters for the modeling purpose. Up to now, no significant step was taken to investigate the compound power plant with thermodynamic analyses and network predictability hybrid in such a detailed oriented approach. It follows that multilayer perceptron neural network with back propagation algorithm deployed with 10–8–9 configuration results in the modeling reliability ranged within R 2 = 0.995–0.999. When dataset treated with trainlm learning algorithm and diversified neurons, the mean square error (MSE) is obtained equal to 0.2175. This denotes a powerful modeling achievement in both scientific and industrial scale to save considerable computational cost on combined cooling, heating, and power system in accomplishment of boosting the energy efficiency and system maintenance

46 CFR 190.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Special consideration. 190.01-15 Section 190.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 190.01-15 Special consideration. (a) Special consideration will...

28 CFR 2.21 - Reparole consideration guidelines.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Reparole consideration guidelines. 2.21....21 Reparole consideration guidelines. (a)(1) If revocation is based upon administrative violation(s... analogy with listed federal offense behaviors. (b) The guidelines for parole consideration specified at 28...

Ethical considerations on novel neuronal interfaces.

Science.gov (United States)

Keskinbora, Kadircan H; Keskinbora, Kader

2018-04-01

Wireless powered implants, each smaller than a grain of rice, have the potential to scan and stimulate brain cells. Further research may lead to next-generation brain-machine interfaces for controlling prosthetics, exoskeletons, and robots, as well as "electroceuticals" to treat disorders of the brain and body. In conditions that can be particularly alleviated with brain stimulation, the use of such mini devices may pose certain challenges. Health professionals are becoming increasingly more accountable in decision-making processes that have impacts on the life quality of individuals. It is possible to transmit such stimulation using remote control principles. Perhaps, the most important concern regarding the use of these devices termed as "neural dust" is represented by the possibility of controlling affection and other mental functions via waves reaching the brain using more advanced versions of such devices. This will not only violate the respect for authority principle of ethics, but also medical ethics, and may potentially lead to certain incidents of varying vehemence that may be considered illegal. Therefore, a sound knowledge and implementation of ethical principles is becoming a more important issue on the part of healthcare professionals. In both the ethical decision-making process and in ethical conflicts, it may be useful to re-appraise the principles of medical ethics. In this article, the ethical considerations of these devices are discussed.

New varying speed of light theories

CERN Document Server

Magueijo, J

2003-01-01

We review recent work on the possibility of a varying speed of light (VSL). We start by discussing the physical meaning of a varying $c$, dispelling the myth that the constancy of $c$ is a matter of logical consistency. We then summarize the main VSL mechanisms proposed so far: hard breaking of Lorentz invariance; bimetric theories (where the speeds of gravity and light are not the same); locally Lorentz invariant VSL theories; theories exhibiting a color dependent speed of light; varying $c$ induced by extra dimensions (e.g. in the brane-world scenario); and field theories where VSL results from vacuum polarization or CPT violation. We show how VSL scenarios may solve the cosmological problems usually tackled by inflation, and also how they may produce a scale-invariant spectrum of Gaussian fluctuations, capable of explaining the WMAP data. We then review the connection between VSL and theories of quantum gravity, showing how ``doubly special'' relativity has emerged as a VSL effective model of quantum space...

46 CFR 92.01-15 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Special consideration. 92.01-15 Section 92.01-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CARGO AND MISCELLANEOUS VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 92.01-15 Special consideration. (a) Special consideration will be...

Perceptual-cognitive expertise in sport: some considerations when applying the expert performance approach.

Science.gov (United States)

Williams, A Mark; Ericsson, K Anders

2005-06-01

The number of researchers studying perceptual-cognitive expertise in sport is increasing. The intention in this paper is to review the currently accepted framework for studying expert performance and to consider implications for undertaking research work in the area of perceptual-cognitive expertise in sport. The expert performance approach presents a descriptive and inductive approach for the systematic study of expert performance. The nature of expert performance is initially captured in the laboratory using representative tasks that identify reliably superior performance. Process-tracing measures are employed to determine the mechanisms that mediate expert performance on the task. Finally, the specific types of activities that lead to the acquisition and development of these mediating mechanisms are identified. General principles and mechanisms may be discovered and then validated by more traditional experimental designs. The relevance of this approach to the study of perceptual-cognitive expertise in sport is discussed and suggestions for future work highlighted.

Modeling Unobserved Consideration Sets for Household Panel Data

NARCIS (Netherlands)

J.E.M. van Nierop; R. Paap (Richard); B. Bronnenberg; Ph.H.B.F. Franses (Philip Hans)

2000-01-01

textabstractWe propose a new method to model consumers' consideration and choice processes. We develop a parsimonious probit type model for consideration and a multinomial probit model for choice, given consideration. Unlike earlier models of consideration ours is not prone to the curse of

Performance of juvenile mojarra supplied with feed containing varying levels of crude protein

Directory of Open Access Journals (Sweden)

Ricardo Henrique Bastos de Souza

2016-04-01

Full Text Available ABSTRACT The growth of the Brazilian aquaculture has stimulated the development of the productive chain of native species, including marine environment. The objective of this study was to evaluate the growth performance of juvenile mojarra fish (Diapterus rhombeus fed diets containing different concentrations of crude protein (32, 36, 40 and 44 g 100 g-1. The 80 juvenile mojarra (7.2±1.5 g were kept in 16 circular tanks (150 L. The study design used was completely randomized with four treatments and four repetitions. The fish were fed four times a day. At the end of the experiment (60 days the final weight, feed intake, weight gain (WG, feed:gain ratio (FGR, protein efficiency rate (PER, energy efficiency rate, specific growth, survival rate and, body composition were evaluated. It was verified significant effect of protein level on the WG, with the best value at the level of 38.20 g 100 g-1 of crude protein. For FGR, the best estimated value occurred with 38.06 g 100 g-1 of crude protein, similar to that reported for the PER (38.91 g 100 g-1. The other performance parameters and body composition were not influenced by crude protein levels. Diet crude protein concentrations between 38.06 and 38.91 g 100 g-1 provide the best performance indices for juvenile mojarra.

46 CFR 72.01-20 - Special consideration.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Special consideration. 72.01-20 Section 72.01-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS CONSTRUCTION AND ARRANGEMENT Hull Structure § 72.01-20 Special consideration. (a) Special consideration will be given to the...

Time-varying delays compensation algorithm for powertrain active damping of an electrified vehicle equipped with an axle motor during regenerative braking

Science.gov (United States)

Zhang, Junzhi; Li, Yutong; Lv, Chen; Gou, Jinfang; Yuan, Ye

2017-03-01

The flexibility of the electrified powertrain system elicits a negative effect upon the cooperative control performance between regenerative and hydraulic braking and the active damping control performance. Meanwhile, the connections among sensors, controllers, and actuators are realized via network communication, i.e., controller area network (CAN), that introduces time-varying delays and deteriorates the control performances of the closed-loop control systems. As such, the goal of this paper is to develop a control algorithm to cope with all these challenges. To this end, the models of the stochastic network induced time-varying delays, based on a real in-vehicle network topology and on a flexible electrified powertrain, were firstly built. In order to further enhance the control performances of active damping and cooperative control of regenerative and hydraulic braking, the time-varying delays compensation algorithm for the electrified powertrain active damping during regenerative braking was developed based on a predictive scheme. The augmented system is constructed and the H∞ performance is analyzed. Based on this analysis, the control gains are derived by solving a nonlinear minimization problem. The simulations and hardware-in-loop (HIL) tests were carried out to validate the effectiveness of the developed algorithm. The test results show that the active damping and cooperative control performances are enhanced significantly.

Modeling and optimization of a network of energy hubs to improve economic and emission considerations

International Nuclear Information System (INIS)

Maroufmashat, Azadeh; Elkamel, Ali; Fowler, Michael; Sattari, Sourena; Roshandel, Ramin; Hajimiragha, Amir; Walker, Sean; Entchev, Evgueniy

2015-01-01

Energy hubs that incorporate a variety of energy generation and energy transformation technologies can be used to provide the energy storage needed to enable the efficient operation of a ‘smart energy network’. When these hubs are combined as a network and allowed to exchange energy, they create efficiency advantages in both financial and environmental performance. Further, the interconnectedness of the energy network design provides an added layer of reliability. In this paper, a complex network of energy hubs is modeled and optimized under different scenarios to examine both the financial viability and potential reduction of greenhouse gas emissions. Two case studies consisting of two and three energy hubs within a network are considered. The modeling Scenarios vary according to the consideration of distributed energy systems and energy interaction between energy hubs. In the case of a network of two energy hubs, there is no significant economic or emissions benefit with only a 0.5% reduction in total cost and 3% reduction in CO_2 emission. In the case of a network of three energy hubs, there is a significant economic benefit ranging from 11% to 29%, and 11% emission reduction benefit, as well as a 13% reduction in natural gas consumption. - Highlights: • The generic form of the modified energy hub concept with network model is presented. • Two case studies are presented to demonstrate the benefits of energy hub network. • Distributed energy is shown to provide economic and environmental advantages. • Multi criteria optimization of the economic and environmental performance is done.

Child-Langmuir flow with periodically varying anode voltage

International Nuclear Information System (INIS)

Rokhlenko, A.

2015-01-01

Using the Lagrangian technique, we study settled Child-Langmuir flows in a one dimensional planar diodes whose anode voltages periodically vary around given positive values. Our goal is to find analytically if the average currents in these systems can exceed the famous Child-Langmuir limit found for the stationary current a long time ago. The main result of our study is that in a periodic quasi-stationary regime the average current can be larger than the Child-Langmuir maximum even by 50% compared with its adiabatic average value. The cathode current in this case has the form of rectangular pulses which are formed by a very special triangular voltage modulation. This regime, i.e., periodicity, shape of pulses, and their amplitude, needs to be carefully chosen for the best performance

International Thermonuclear Experimental Reactor (ITER) divertor plate performance and lifetime considerations

International Nuclear Information System (INIS)

Mattas, R.F.

1990-03-01

The ITER divertor plate performance during the technology phase of operation has been analyzed. High-Z materials, such as tungsten and tantalum, have been considered as plasma side materials, and refractory metal alloys, Ta-10W, TZM, Nb-1Zr, and V-15Cr-5Ti, plus copper alloys have been considered as the structural materials. The fatigue lifetime have been predicted for structural plates and for duplex plates with the plasma side material bonded to the structure. The results indicate that refractory alloys have a comparable or improved performance to copper alloys. Peak allowable heat fluxes for these analyses are in the range of 15--20 MW/m 2 for 2 mm thick structural plates and 7--11 MW/m 2 for 4 mm thick duplex plates. 4 refs., 55 figs., 6 tabs

17 CFR 201.401 - Consideration of stays.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Consideration of stays. 201... PRACTICE Rules of Practice Appeal to the Commission and Commission Review § 201.401 Consideration of stays... consideration. Where the action complained of has already taken effect and the motion for stay is filed within...

Laterality of repetitive finger movement performance and clinical features of Parkinson's disease.

Science.gov (United States)

Stegemöller, Elizabeth; Zaman, Andrew; MacKinnon, Colum D; Tillman, Mark D; Hass, Chris J; Okun, Michael S

2016-10-01

Impairments in acoustically cued repetitive finger movement often emerge at rates near to and above 2Hz in persons with Parkinson's Disease (PD) in which some patients move faster (hastening) and others move slower (bradykinetic). The clinical features impacting this differential performance of repetitive finger movement remain unknown. The purpose of this study was to compare repetitive finger movement performance between the more and less affected side, and the difference in clinical ratings among performance groups. Forty-one participants diagnosed with idiopathic PD completed an acoustically cued repetitive finger movement task while "on" medication. Eighteen participants moved faster, 10 moved slower, and 13 were able to maintain the appropriate rate at rates above 2Hz. Clinical measures of laterality, disease severity, and the UPDRS were obtained. There were no significant differences between the more and less affected sides regardless of performance group. Comparison of disease severity, tremor, and rigidity among performance groups revealed no significant differences. Comparison of posture and postural instability scores revealed that the participants that demonstrated hastening had worse posture and postural instability scores. Consideration of movement rate during the clinical evaluation of repetitive finger movement may provide additional insight into varying disease features in persons with PD. Copyright © 2016 Elsevier B.V. All rights reserved.

Focusing the Sun: State Considerations for Designing Community Solar Policy

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Shah, Monisha R [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-31

This report summarizes outcomes from the National Community Solar Partnership State Best Practices working group by identifying key differences in state policies that enable community solar and illustrating how various policy design approaches may impact the market. For the latter question, it is too early to quantify a relationship between policy design and market impacts, because most state programs have not been fully implemented. So, the authors conducted interviews with 19 subject matter experts, including project developers, regulators, and utilities to better understand how various policy design approaches may impact community solar markets. These perspectives, along with those gleaned from the working group and relevant literature were synthesized to identify key considerations for policymakers designing community solar programs. Though state community solar policies vary in numerous ways, the report focuses on the following critical elements: program cap, project size cap, subscriber location requirements, subscriber eligibility requirements, low- and moderate-income stipulations, and subscriber compensation.

Sustainability considerations for health research and analytic data infrastructures.

Science.gov (United States)

Wilcox, Adam; Randhawa, Gurvaneet; Embi, Peter; Cao, Hui; Kuperman, Gilad J

2014-01-01

The United States has made recent large investments in creating data infrastructures to support the important goals of patient-centered outcomes research (PCOR) and comparative effectiveness research (CER), with still more investment planned. These initial investments, while critical to the creation of the infrastructures, are not expected to sustain them much beyond the initial development. To provide the maximum benefit, the infrastructures need to be sustained through innovative financing models while providing value to PCOR and CER researchers. Based on our experience with creating flexible sustainability strategies (i.e., strategies that are adaptive to the different characteristics and opportunities of a resource or infrastructure), we define specific factors that are important considerations in developing a sustainability strategy. These factors include assets, expansion, complexity, and stakeholders. Each factor is described, with examples of how it is applied. These factors are dimensions of variation in different resources, to which a sustainability strategy should adapt. We also identify specific important considerations for maintaining an infrastructure, so that the long-term intended benefits can be realized. These observations are presented as lessons learned, to be applied to other sustainability efforts. We define the lessons learned, relating them to the defined sustainability factors as interactions between factors. Using perspectives and experiences from a diverse group of experts, we define broad characteristics of sustainability strategies and important observations, which can vary for different projects. Other descriptions of adaptive, flexible, and successful models of collaboration between stakeholders and data infrastructures can expand this framework by identifying other factors for sustainability, and give more concrete directions on how sustainability can be best achieved.

Flexible Demand Management under Time-Varying Prices

Science.gov (United States)

Liang, Yong

optimization problem when the objective is to minimize the expected total cost and discomfort, then since the decision maker is likely to be risk-averse, and she wants to protect herself from price spikes, we study the robust optimization problem to address the risk-aversion of the decision maker. We conduct numerical studies to evaluate the price of robustness. Next, we present a detailed model that manages multiple types of flexible demand in the absence of knowledge regarding the distributions of related stochastic processes. Specifically, we consider the case in which time-varying prices with general structures are offered to users, and an energy management system for each household makes optimal energy usage, storage, and trading decisions according to the preferences of users. Because of the uncertainties associated with electricity prices, local generation, and the arrival processes of demand, we formulate a stochastic dynamic programming model, and outline a novel and tractable ADP approach to overcome the curses of dimensionality. Then, we perform numerical studies, whose results demonstrate the effectiveness of the ADP approach. At last, we propose another approximation approach based on Q-learning. In addition, we also develop another decentralization-based heuristic. Both the Q-learning approach and the heuristic make necessary assumptions on the knowledge of information, and each of them has unique advantages. We conduct numerical studies on a testing problem. The simulation results show that both the Q-learning and the decentralization based heuristic approaches work well. Lastly, we conclude the paper with some discussions on future extension directions.

Knowledge diffusion in complex networks by considering time-varying information channels

Science.gov (United States)

Zhu, He; Ma, Jing

2018-03-01

In this article, based on a model of epidemic spreading, we explore the knowledge diffusion process with an innovative mechanism for complex networks by considering time-varying information channels. To cover the knowledge diffusion process in homogeneous and heterogeneous networks, two types of networks (the BA network and the ER network) are investigated. The mean-field theory is used to theoretically draw the knowledge diffusion threshold. Numerical simulation demonstrates that the knowledge diffusion threshold is almost linearly correlated with the mean of the activity rate. In addition, under the influence of the activity rate and distinct from the classic Susceptible-Infected-Susceptible (SIS) model, the density of knowers almost linearly grows with the spreading rate. Finally, in consideration of the ubiquitous mechanism of innovation, we further study the evolution of knowledge in our proposed model. The results suggest that compared with the effect of the spreading rate, the average knowledge version of the population is affected more by the innovation parameter and the mean of the activity rate. Furthermore, in the BA network, the average knowledge version of individuals with higher degree is always newer than those with lower degree.

Polycystic Ovary Syndrome: Update on Treatment Options and Treatment Considerations for the Future

Directory of Open Access Journals (Sweden)

Kristen A. Farrell-Turner

2011-01-01

Full Text Available Polycystic ovary syndrome is an endocrine disorder characterized by insulin resistance, hyperandrogenemia, obesity, and inflammation, and is the most common cause of infertility. Women with PCOS are at higher risk than non-PCOS women for diabetes, cardiovascular disease, endometrial cancer, and psychiatric disorders. Because many abnormalities present in PCOS and symptoms vary considerably among PCOS women, treatment is guided by presentation and does not consist of simply one modality. Often, however, one type of medication can ameliorate more than one abnormality in PCOS. This review summarizes current research on several treatment modalities for PCOS, including drugs that are fairly well-established as efficacious and other agents that may prove efficacious in the future, with particular emphasis on the benefits and barriers of lifestyle change.

Genetic algorithm–based varying parameter linear quadratic regulator control for four-wheel independent steering vehicle

Directory of Open Access Journals (Sweden)

Linlin Gao

2015-11-01

Full Text Available From the perspective of vehicle dynamics, the four-wheel independent steering vehicle dynamics stability control method is studied, and a four-wheel independent steering varying parameter linear quadratic regulator control system is proposed with the help of expert control method. In the article, a four-wheel independent steering linear quadratic regulator controller for model following purpose is designed first. Then, by analyzing the four-wheel independent steering vehicle dynamic characteristics and the influence of linear quadratic regulator control parameters on control performance, a linear quadratic regulator control parameter adjustment strategy based on vehicle steering state is proposed to achieve the adaptive adjustment of linear quadratic regulator control parameters. In addition, to further improve the control performance, the proposed varying parameter linear quadratic regulator control system is optimized by genetic algorithm. Finally, simulation studies have been conducted by applying the proposed control system to the 8-degree-of-freedom four-wheel independent steering vehicle dynamics model. The simulation results indicate that the proposed control system has better performance and robustness and can effectively improve the stability and steering safety of the four-wheel independent steering vehicle.

Heat transfer characteristics of porous sludge deposits and their impact on the performance of commercial steam generators

International Nuclear Information System (INIS)

Kreider, M.A.; White, G.A.; Varrin, R.D.; Ouzts, P.J.

1998-12-01

Steam generator (SG) fouling, in the form of corrosion deposits on the secondary sides of SG tubes, has been known to occur in almost all commercial US nuclear PWR (pressurized water reactor) plants. The level of fouling, as measured by the quantity of corrosion products that form, varies widely from plant to plant. In addition, the effect of SG fouling, as measured by a decrease in effective heat-transfer coefficient, has also varied substantially among commercial US plants. While some have observed large decreases in heat transfer, others have noted little change in performance despite the presence of significant quantities of secondary corrosion layers on their SG tubes. This observation has led to considerable confusion about what role secondary deposits play in causing heat-transfer degradation in SGs. As will become clear later in this report, secondary deposits can have a wide range of effects on heat transfer, from highly resistive to slightly enhancing (reflected by negative fouling). These different behaviors are the result of differences in deposit thickness, composition, and morphology. The main focus of this report is an investigation of the effects of secondary deposits on SG thermal performance. This investigation includes compilation of detailed information on the properties of tube scale at five commercial US nuclear plants and corresponding information characterizing SG thermal performance at these plants

Muscle and reflex changes with varying joint angle in hemiparetic stroke

Directory of Open Access Journals (Sweden)

Alibiglou Laila

2008-02-01

Full Text Available Abstract Background Despite intensive investigation, the origins of the neuromuscular abnormalities associated with spasticity are not well understood. In particular, the mechanical properties induced by stretch reflex activity have been especially difficult to study because of a lack of accurate tools separating reflex torque from torque generated by musculo-tendinous structures. The present study addresses this deficit by characterizing the contribution of neural and muscular components to the abnormally high stiffness of the spastic joint. Methods Using system identification techniques, we characterized the neuromuscular abnormalities associated with spasticity of ankle muscles in chronic hemiparetic stroke survivors. In particular, we systematically tracked changes in muscle mechanical properties and in stretch reflex activity during changes in ankle joint angle. Modulation of mechanical properties was assessed by applying perturbations at different initial angles, over the entire range of motion (ROM. Experiments were performed on both paretic and non-paretic sides of stroke survivors, and in healthy controls. Results Both reflex and intrinsic muscle stiffnesses were significantly greater in the spastic/paretic ankle than on the non-paretic side, and these changes were strongly position dependent. The major reflex contributions were observed over the central portion of the angular range, while the intrinsic contributions were most pronounced with the ankle in the dorsiflexed position. Conclusion In spastic ankle muscles, the abnormalities in intrinsic and reflex components of joint torque varied systematically with changing position over the full angular range of motion, indicating that clinical perceptions of increased tone may have quite different origins depending upon the angle where the tests are initiated. Furthermore, reflex stiffness was considerably larger in the non-paretic limb of stroke patients than in healthy control subjects

A Review of Adversity, The Amygdala and the Hippocampus: A Consideration of Developmental Timing

Science.gov (United States)

Tottenham, Nim; Sheridan, Margaret A.

2009-01-01

A review of the human developmental neuroimaging literature that investigates outcomes following exposure to psychosocial adversity is presented with a focus on two subcortical structures – the hippocampus and the amygdala. Throughout this review, we discuss how a consideration of developmental timing of adverse experiences and age at measurement might provide insight into the seemingly discrepant findings across studies. We use findings from animal studies to suggest some mechanisms through which timing of experiences may result in differences across time and studies. The literature suggests that early life may be a time of heightened susceptibility to environmental stressors, but that expression of these effects will vary by age at measurement. PMID:20161700

Design considerations for post accident monitoring system of a research reactor

International Nuclear Information System (INIS)

Jang, Gwi Sook; Park, Je Yun; Kim, Young Ki

2012-01-01

The Post Accident Monitoring System (PAMS) provides primary information for operators to assess the plant conditions and perform their role in bringing the plant to a safe condition during an accident. The PAMS of NPP (Nuclear Power Plant) in KOREA provides the continuous display of the PAM category 1 parameters specified in R.G 1.97, Rev. 03. Recently the PAMS of NPP has been designed according to R.G 1.97, Rev. 04. There is no PAMS at the HANARO in KOREA, but recently RRs (Research Reactors) around the world are going to have PAMS for various multi purposes. We should determine the design considerations for PAMS in a Korean RR based on the design state analysis. Thus, this paper proposes strategies on the design considerations for the PAMS of a Korean RR

Seismic considerations in sealing a potential high-level radioactive waste repository

International Nuclear Information System (INIS)

Fernandez, J.A.; Richardson, A.M.; Lin, Ming

1993-01-01

The potential repository system is intended to isolate high-level radioactive waste at Yucca Mountain according the performance objective--10 CFR 60.112. One subsystem that may contribute to achieving this objective is the sealing subsystem. This subsystem is comprised of sealing components in the shafts, ramps, underground network of drifts, and the exploratory boreholes. Sealing components can be rigid, as in the case of a shaft seal, or can be more compressible, as in the case of drift fill comprised of mined rockfill. This paper presents the preliminary seismic response of discrete sealing components in welded and nonwelded tuff. Special consideration is given to evaluating the stress in the seal, and the behavior of the interface between the seal and the rock. The seismic responses are computed using both static and dynamic analyses. Also presented is an evaluation of the maximum seismic response encountered by a drift seal with respect to the angle of incidence of the seismic wave. Mitigation strategies and seismic design considerations are proposed which can potentially enhance the overall response of the sealing component and subsequently, the performance of the overall repository system

Estimating time-varying exposure-outcome associations using case-control data: logistic and case-cohort analyses.

Science.gov (United States)

Keogh, Ruth H; Mangtani, Punam; Rodrigues, Laura; Nguipdop Djomo, Patrick

2016-01-05

Traditional analyses of standard case-control studies using logistic regression do not allow estimation of time-varying associations between exposures and the outcome. We present two approaches which allow this. The motivation is a study of vaccine efficacy as a function of time since vaccination. Our first approach is to estimate time-varying exposure-outcome associations by fitting a series of logistic regressions within successive time periods, reusing controls across periods. Our second approach treats the case-control sample as a case-cohort study, with the controls forming the subcohort. In the case-cohort analysis, controls contribute information at all times they are at risk. Extensions allow left truncation, frequency matching and, using the case-cohort analysis, time-varying exposures. Simulations are used to investigate the methods. The simulation results show that both methods give correct estimates of time-varying effects of exposures using standard case-control data. Using the logistic approach there are efficiency gains by reusing controls over time and care should be taken over the definition of controls within time periods. However, using the case-cohort analysis there is no ambiguity over the definition of controls. The performance of the two analyses is very similar when controls are used most efficiently under the logistic approach. Using our methods, case-control studies can be used to estimate time-varying exposure-outcome associations where they may not previously have been considered. The case-cohort analysis has several advantages, including that it allows estimation of time-varying associations as a continuous function of time, while the logistic regression approach is restricted to assuming a step function form for the time-varying association.

Multi-Flow Carrier Aggregation in Heterogeneous Networks: Cross-Layer Performance Analysis

KAUST Repository

Alorainy, Abdulaziz

2017-02-09

Multi-flow carrier aggregation (CA) has recently been considered to meet the increasing demand for high data rates. In this paper, we investigate the cross-layer performance of multi-flow CA for macro user equipments (MUEs) in the expanded range (ER) of small cells. We develop a fork/join (F/J) queuing analytical model that takes into account the time varying channels, the channel scheduling algorithm, partial CQI feedback and the number of component carriers deployed at each tier. Our model also accounts for stochastic packet arrivals and the packet scheduling mechanism. The analytical model developed in this paper can be used to gauge various packet-level performance parameters e.g., packet loss probability (PLP) and queuing delay. For the queuing delay, our model takes out-of-sequence packet delivery into consideration. The developed model can also be used to find the amount of CQI feedback and the packet scheduling of a particular MUE in order to offload as much traffic as possible from the macrocells to the small cells while maintaining the MUE\\'s quality of service (QoS) requirements.

A review of the performance and structural considerations of paraffin wax hybrid rocket fuels with additives

Science.gov (United States)

Veale, Kirsty; Adali, Sarp; Pitot, Jean; Brooks, Michael

2017-12-01

Paraffin wax as a hybrid rocket fuel has not been comprehensively characterised, especially regarding the structural feasibility of the material in launch applications. Preliminary structural testing has shown paraffin wax to be a brittle, low strength material, and at risk of failure under launch loading conditions. Structural enhancing additives have been identified, but their effect on motor performance has not always been considered, nor has any standard method of testing been identified between research institutes. A review of existing regression rate measurement techniques on paraffin wax based fuels and the results obtained with various additives are collated and discussed in this paper. The review includes 2D slab motors that enable visualisation of liquefying fuel droplet entrainment and the effect of an increased viscosity on the droplet entrainment mechanism, which can occur with the addition of structural enhancing polymers. An increased viscosity has been shown to reduce the regression rate of liquefying fuels. Viscosity increasing additives that have been tested include EVA and LDPE. Both these additives increase the structural properties of paraffin wax, where the elongation and UTS are improved. Other additives, such as metal hydrides, aluminium and boron generally offer improvements on the regression rate. However, very little consideration has been given to the structural effects these additives have on the wax grain. A 40% aluminised grain, for example, offers a slight increase in the UTS but reduces the elongation of paraffin wax. Geometrically accurate lab-scale motors have also been used to determine the regression rate properties of various additives in paraffin wax. A concise review of all available regression rate testing techniques and results on paraffin wax based hybrid propellants, as well as existing structural testing data, is presented in this paper.

Reproductive performance in ewes fed varying levels of cut lucerne pasture around conception.

Science.gov (United States)

Robertson, S M; Clayton, E H; Morgan, B; Friend, M A

2015-07-01

Elevated intakes of protein and energy may increase embryo mortality, but it is not clear whether fresh lucerne (Medicago sativa) pasture poses a risk. A two-year pen study using oestrous synchronised and artificially inseminated Merino ewes (n=175 in 2013 and 215 in 2014) evaluated whether feeding freshly cut lucerne pasture (mean crude protein 19.7%, metabolisable energy 9.4MJ/kg DM) at maintenance or ad libitum during different periods around insemination altered reproductive performance in comparison with ewes fed a Control diet (mean crude protein 7.8%, metabolisable energy 9.0MJ/kg DM) of pelleted faba bean hulls and oat grain hulls at maintenance. The proportion of pregnant ewes carrying multiple fetuses was reduced (P=0.026) when ewes were fed lucerne ad libitum between days 0 and 17 after insemination compared with the Control diet (0.18 and 0.34, respectively), but not when ewes were fed lucerne ad libitum between days 0 and 7 after insemination (0.22). Reproductive performance, including the proportion of ewes pregnant and the proportion with multiple fetuses, was not different (P>0.05) when ewes were fed lucerne at maintenance between days 0 and 7 compared with the Control diet. While reproductive performance was similar when ewes were fed lucerne at maintenance between 0 and 17 days after artificial insemination compared with pellets at maintenance, fetal numbers per pregnant ewe were reduced by feeding lucerne ad libitum after insemination. Copyright © 2015 Elsevier B.V. All rights reserved.

Go with the flow: how the consideration of joy versus pride influences automaticity.

Science.gov (United States)

Katzir, Maayan; Ori, Bnaya; Eyal, Tal; Meiran, Nachshon

2015-02-01

Recently, we have shown that the consideration of joy, without the actual experience of the emotion, impaired performance on the antisaccade task (Katzir, Eyal, Meiran, & Kessler, 2010). We interpreted this finding as indicating inhibitory control failure. However, impaired antisaccade performance may result from either the weakening of inhibitory control, the potentiation of the competing automatic response, or both. In the current research we used a task switching paradigm, which allowed us to assess cognitive control more directly, using Backward Inhibition, Competitor Rule Suppression, and Competitor Rule Priming as cognitive-control indices as well as assessing the Task Rule Congruency Effect (TRCE) which, like the antisaccade, is influenced by both control and automaticity. We found that considering joy compared to pride did not influence any of the cognitive control indices but increased the TRCE. We interpret this finding as evidence that joy consideration leads to increased reliance on automatic tendencies, such as short-term desires. Copyright © 2014 Elsevier B.V. All rights reserved.

40 CFR 194.33 - Consideration of drilling events in performance assessments.

Science.gov (United States)

2010-07-01

... assessments. (a) Performance assessments shall examine deep drilling and shallow drilling that may potentially affect the disposal system during the regulatory time frame. (b) The following assumptions and process... process shall be documented in any compliance application: (1) Inadvertent and intermittent intrusion by...

29 CFR 1614.305 - Consideration procedures.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Consideration procedures. 1614.305 Section 1614.305 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION FEDERAL SECTOR EQUAL EMPLOYMENT OPPORTUNITY Related Processes § 1614.305 Consideration procedures. (a) Once a petition is filed...

Insurance considerations associated with radiation processing

International Nuclear Information System (INIS)

Boylan, F.X.

1979-01-01

Comments are made on nuclear insurance experience in the United States. The subject is discussed in more detail under the headings: direct physical damage insurance; workers' compensation insurance; third party liability (premises and operations considerations; products considerations); possible alternatives to the existing arrangement. (U.K.)

Children's Avoidance of Interrupting Others' Activities in Requesting Help: Cultural Aspects of Considerateness.

Science.gov (United States)

Ruvalcaba, Omar; Rogoff, Barbara; López, Angélica; Correa-Chávez, Maricela; Gutiérrez, Kris

2015-01-01

To be able to collaborate skillfully, people need to coordinate well with others, taking into account how their actions fit with those of their partners. This is a key aspect of an approach to learning called Learning by Observing and Pitching In, hypothesized to be common in many Indigenous-heritage communities of the Americas. This chapter considers cultural values that emphasize considerateness and awareness of how one's actions impact others such as the Mexican cultural value of respeto and cultural differences in children's efforts to avoid interrupting others' activity. US Mexican-heritage children showed more evidence of avoiding interrupting the ongoing activity of an adult when they requested help, compared with European American children from families with extensive schooling experience. Most of the Mexican-heritage children's requests for help that gave evidence of avoiding interruption were made nonverbally, which may facilitate unobtrusive requests. There were no significant differences among children from two US Mexican-heritage backgrounds varying in experience with Western schooling and likely experience with Indigenous-American practices, suggesting that the Mexican cultural value of respeto and associated considerateness is widespread even among US Mexican-heritage families with extensive experience with Western schooling and life in the United States. © 2015 Elsevier Inc. All rights reserved.

THEORETICAL AND PRACTICAL CONSIDERATIONS REGARDING THE COST CALCULATION USING DIRECT COSTING

Directory of Open Access Journals (Sweden)

Cristina Aurora, Bunea-Bontaş

2012-01-01

Full Text Available The definition of the cost of production as applied to inventories refers to the acquisition and production cost, and its determination involves many considerations. This article emphasizes a comparative approach of the calculation of production cost under direct costing and absorption costing, and examines the impact of using these calculation systems on the financial performance of the companies presented in the income statement.

Considerations for closure of low-level radioactive waste engineered disposal facilities

International Nuclear Information System (INIS)

1992-01-01

Proper stabilization and closure of low-level radioactive waste disposal facilities require detailed planning during the early stages of facility development. This report provides considerations for host States, compact regions, and unaffiliated States on stabilization and closure of engineered low-level radioactive waste and mixed waste disposal facilities. A time line for planning closure activities, which identifies closure considerations to be addressed during various stages of a facility's development, is presented. Current Federal regulatory requirements and guidance for closure and post-closure are outlined. Significant differences between host State and Federal closure requirements are identified. Design features used as stabilization measures that support closure, such as waste forms and containers, backfill materials, engineered barrier systems, and site drainage systems, are described. These design features are identified and evaluated in terms of how they promote long-term site stability by minimizing water infiltration, controlling subsidence and surface erosion, and deterring intrusion. Design and construction features critical to successful closure are presented for covers and site drainage. General considerations for stabilization and closure operations are introduced. The role of performance and environmental monitoring during closure is described

Mediation analysis with time varying exposures and mediators.

Science.gov (United States)

VanderWeele, Tyler J; Tchetgen Tchetgen, Eric J

2017-06-01

In this paper we consider causal mediation analysis when exposures and mediators vary over time. We give non-parametric identification results, discuss parametric implementation, and also provide a weighting approach to direct and indirect effects based on combining the results of two marginal structural models. We also discuss how our results give rise to a causal interpretation of the effect estimates produced from longitudinal structural equation models. When there are time-varying confounders affected by prior exposure and mediator, natural direct and indirect effects are not identified. However, we define a randomized interventional analogue of natural direct and indirect effects that are identified in this setting. The formula that identifies these effects we refer to as the "mediational g-formula." When there is no mediation, the mediational g-formula reduces to Robins' regular g-formula for longitudinal data. When there are no time-varying confounders affected by prior exposure and mediator values, then the mediational g-formula reduces to a longitudinal version of Pearl's mediation formula. However, the mediational g-formula itself can accommodate both mediation and time-varying confounders and constitutes a general approach to mediation analysis with time-varying exposures and mediators.

The Scalp Time-Varying Networks of N170: Reference, Latency, and Information Flow

Directory of Open Access Journals (Sweden)

Yin Tian

2018-04-01

Full Text Available Using the scalp time-varying network method, the present study is the first to investigate the temporal influence of the reference on N170, a negative event-related potential component (ERP appeared about 170 ms that is elicited by facial recognition, in the network levels. Two kinds of scalp electroencephalogram (EEG references, namely, AR (average of all recording channels and reference electrode standardization technique (REST, were comparatively investigated via the time-varying processing of N170. Results showed that the latency and amplitude of N170 were significantly different between REST and AR, with the former being earlier and smaller. In particular, the information flow from right temporal-parietal P8 to left P7 in the time-varying network was earlier in REST than that in AR, and this phenomenon was reproduced by simulation, in which the performance of REST was closer to the true case at source level. These findings indicate that reference plays a crucial role in ERP data interpretation, and importantly, the newly developed approximate zero-reference REST would be a superior choice for precise evaluation of the scalp spatio-temporal changes relating to various cognitive events.

Syntheses of carbon porous materials with varied pore sizes and their performances as catalyst supports during methanol oxidation reaction

International Nuclear Information System (INIS)

Lo, An-Ya; Hung, Chin-Te; Yu, Ningya; Kuo, Cheng-Tzu; Liu, Shang-Bin

2012-01-01

Highlights: ► CPMs with varied pore sizes (1–400 nm) were replicated from various porous silicas by CVI method. ► MOR activities of Pt/CPM electrocatalysts increase with increasing pore size of CPM support. ► Microporous CPMs are favorable supports for Pt in terms of catalytic performance and CO-tolerance. -- Abstract: Carbon porous materials (CPMs) with extended ranges of pore size and morphology were replicated using various porous silicas, such as zeolites, mesoporous silicas, and photonic crystals, as templates by means of chemical vapor infiltration (CVI) method. The micro-, meso-, and macro-porous carbons so fabricated were adopted as supports for the metal (Pt) catalyst for direct methanol fuel cells (DMFCs), and the supported Pt/CPM electrocatalysts were characterized by a variety of different spectroscopic/analytical techniques, viz. transmission electron microscopy (TEM), Raman, X-ray photoelectron spectroscopy (XPS), gas physisorption/chemisorption analyses, and cyclic voltammetry (CV). That these Pt/CPMs were found to exhibit superior electrocatalytic activities compared to the commercial Pt/XC-72 with a comparable Pt loading during methanol oxidation reaction (MOR) is attributed to the presence of Pt nanoparticles (NPs; typically 1–3 nm in size) that are highly dispersed in the CPMs, facilitating an improved tolerance for CO poisoning. While the MOR activity observed for various Pt/CPMs tend to increase with increasing pore size of the carbon supports, Pt catalyst supported on carbon substrates possessing microporosities was found to have superior stability in terms of tolerance for CO poisoning than those with greater pore size or having meso- and macroporosities.

Eestlased Karlovy Varys / J. R.

Index Scriptorium Estoniae

J. R.

2007-01-01

Ilmar Raagi mängufilm "Klass" osaleb 42. Karlovy Vary rahvusvahelise filmifestivali võistlusprogrammis "East of the West" ja Asko Kase lühimängufilm "Zen läbi prügi" on valitud festivali kõrvalprogrammi "Forum of Independents"

7 CFR 1735.92 - Accounting considerations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Accounting considerations. 1735.92 Section 1735.92... All Acquisitions and Mergers § 1735.92 Accounting considerations. (a) Proper accounting shall be... in the absence of such a commission, as required by RUS based on Generally Accepted Accounting...

48 CFR 226.7104 - Other considerations.

Science.gov (United States)

2010-10-01

... Businesses 226.7104 Other considerations. When planning for contracts for services related to base closure activities at a military installation affected by a closure or realignment under a base closure law... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Other considerations. 226...

Performance and emission studies on port injection of hydrogen with varied flow rates with Diesel as an ignition source

International Nuclear Information System (INIS)

Saravanan, N.; Nagarajan, G.

2010-01-01

Automobiles are one of the major sources of air pollution in the environment. In addition CO 2 emission, a product of complete combustion also has become a serious issue due to global warming effect. Hence the search for cleaner alternative fuels has become mandatory. Hydrogen is expected to be one of the most important fuels in the near future for solving the problems of air pollution and greenhouse gas problems (carbon dioxide), thereby protecting the environment. Hence in the present work, an experimental investigation has been carried out using hydrogen in the dual fuel mode in a Diesel engine system. In the study, a Diesel engine was converted into a dual fuel engine and hydrogen fuel was injected into the intake port while Diesel was injected directly inside the combustion chamber during the compression stroke. Diesel injected inside the combustion chamber will undergo combustion first which in-turn would ignite the hydrogen that will also assist the Diesel combustion. Using electronic control unit (ECU), the injection timings and injection durations were varied for hydrogen injection while for Diesel the injection timing was 23 o crank angle (CA) before injection top dead centre (BITDC). Based on the performance, combustion and emission characteristics, the optimized injection timing was found to be 5 o CA before gas exchange top dead centre (BGTDC) with injection duration of 30 o CA for hydrogen Diesel dual fuel operation. The optimum hydrogen flow rate was found to be 7.5 lpm. Results indicate that the brake thermal efficiency in hydrogen Diesel dual fuel operation increases by 15% compared to Diesel fuel at 75% load. The NO X emissions were higher by 1-2% in dual fuel operation at full load compared to Diesel. Smoke emissions are lower in the entire load spectra due to the absence of carbon in hydrogen fuel. The carbon monoxide (CO), carbon dioxide (CO 2 ) emissions were lesser in hydrogen Diesel dual fuel operation compared to Diesel. The use of hydrogen

Performance and emission studies on port injection of hydrogen with varied flow rates with Diesel as an ignition source

Energy Technology Data Exchange (ETDEWEB)

Saravanan, N. [ERC Engines, Tata Motors, Pimpri, Pune (India); Nagarajan, G. [Internal Combustion Engineering Division, Department of Mechanical Engineering, College of Engineering, Guindy, Anna University, Chennai (India)

2010-07-15

Automobiles are one of the major sources of air pollution in the environment. In addition CO{sub 2} emission, a product of complete combustion also has become a serious issue due to global warming effect. Hence the search for cleaner alternative fuels has become mandatory. Hydrogen is expected to be one of the most important fuels in the near future for solving the problems of air pollution and greenhouse gas problems (carbon dioxide), thereby protecting the environment. Hence in the present work, an experimental investigation has been carried out using hydrogen in the dual fuel mode in a Diesel engine system. In the study, a Diesel engine was converted into a dual fuel engine and hydrogen fuel was injected into the intake port while Diesel was injected directly inside the combustion chamber during the compression stroke. Diesel injected inside the combustion chamber will undergo combustion first which in-turn would ignite the hydrogen that will also assist the Diesel combustion. Using electronic control unit (ECU), the injection timings and injection durations were varied for hydrogen injection while for Diesel the injection timing was 23 crank angle (CA) before injection top dead centre (BITDC). Based on the performance, combustion and emission characteristics, the optimized injection timing was found to be 5 CA before gas exchange top dead centre (BGTDC) with injection duration of 30 CA for hydrogen Diesel dual fuel operation. The optimum hydrogen flow rate was found to be 7.5 lpm. Results indicate that the brake thermal efficiency in hydrogen Diesel dual fuel operation increases by 15% compared to Diesel fuel at 75% load. The NO{sub X} emissions were higher by 1-2% in dual fuel operation at full load compared to Diesel. Smoke emissions are lower in the entire load spectra due to the absence of carbon in hydrogen fuel. The carbon monoxide (CO), carbon dioxide (CO{sub 2}) emissions were lesser in hydrogen Diesel dual fuel operation compared to Diesel. The use of

TIME-VARYING DYNAMICAL STAR FORMATION RATE

Energy Technology Data Exchange (ETDEWEB)

Lee, Eve J.; Chang, Philip; Murray, Norman, E-mail: evelee@berkeley.edu [Canadian Institute for Theoretical Astrophysics, 60 St. George Street, University of Toronto, Toronto, ON M5S 3H8 (Canada)

2015-02-10

We present numerical evidence of dynamic star formation in which the accreted stellar mass grows superlinearly with time, roughly as t {sup 2}. We perform simulations of star formation in self-gravitating hydrodynamic and magnetohydrodynamic turbulence that is continuously driven. By turning the self-gravity of the gas in the simulations on or off, we demonstrate that self-gravity is the dominant physical effect setting the mass accretion rate at early times before feedback effects take over, contrary to theories of turbulence-regulated star formation. We find that gravitational collapse steepens the density profile around stars, generating the power-law tail on what is otherwise a lognormal density probability distribution function. Furthermore, we find turbulent velocity profiles to flatten inside collapsing regions, altering the size-line width relation. This local flattening reflects enhancements of turbulent velocity on small scales, as verified by changes to the velocity power spectra. Our results indicate that gas self-gravity dynamically alters both density and velocity structures in clouds, giving rise to a time-varying star formation rate. We find that a substantial fraction of the gas that forms stars arrives via low-density flows, as opposed to accreting through high-density filaments.

Comparison of Linear Microinstability Calculations of Varying Input Realism

International Nuclear Information System (INIS)

Rewoldt, G.

2003-01-01

The effect of varying ''input realism'' or varying completeness of the input data for linear microinstability calculations, in particular on the critical value of the ion temperature gradient for the ion temperature gradient mode, is investigated using gyrokinetic and gyrofluid approaches. The calculations show that varying input realism can have a substantial quantitative effect on the results

Comparison of linear microinstability calculations of varying input realism

International Nuclear Information System (INIS)

Rewoldt, G.; Kinsey, J.E.

2004-01-01

The effect of varying 'input realism' or varying completeness of the input data for linear microinstability calculations, in particular on the critical value of the ion temperature gradient for the ion temperature gradient mode, is investigated using gyrokinetic and gyrofluid approaches. The calculations show that varying input realism can have a substantial quantitative effect on the results

Autoregressive spatially varying coefficients model for predicting daily PM2.5 using VIIRS satellite AOT

Science.gov (United States)

Schliep, E. M.; Gelfand, A. E.; Holland, D. M.

2015-12-01

There is considerable demand for accurate air quality information in human health analyses. The sparsity of ground monitoring stations across the United States motivates the need for advanced statistical models to predict air quality metrics, such as PM2.5, at unobserved sites. Remote sensing technologies have the potential to expand our knowledge of PM2.5 spatial patterns beyond what we can predict from current PM2.5 monitoring networks. Data from satellites have an additional advantage in not requiring extensive emission inventories necessary for most atmospheric models that have been used in earlier data fusion models for air pollution. Statistical models combining monitoring station data with satellite-obtained aerosol optical thickness (AOT), also referred to as aerosol optical depth (AOD), have been proposed in the literature with varying levels of success in predicting PM2.5. The benefit of using AOT is that satellites provide complete gridded spatial coverage. However, the challenges involved with using it in fusion models are (1) the correlation between the two data sources varies both in time and in space, (2) the data sources are temporally and spatially misaligned, and (3) there is extensive missingness in the monitoring data and also in the satellite data due to cloud cover. We propose a hierarchical autoregressive spatially varying coefficients model to jointly model the two data sources, which addresses the foregoing challenges. Additionally, we offer formal model comparison for competing models in terms of model fit and out of sample prediction of PM2.5. The models are applied to daily observations of PM2.5 and AOT in the summer months of 2013 across the conterminous United States. Most notably, during this time period, we find small in-sample improvement incorporating AOT into our autoregressive model but little out-of-sample predictive improvement.

Software and man-machine interface considerations for a nuclear plant computer replacement and upgrade project

International Nuclear Information System (INIS)

Diamond, G.; Robinson, E.

1984-01-01

Some of the key software functions and Man-Machine Interface considerations in a computer replacement and upgrade project for a nuclear power plant are described. The project involves the installation of two separate computer systems: an Emergency Response Facilities Computer System (ERFCS) and a Plant Process Computer System (PPCS). These systems employ state-of-the-art computer hardware and software. The ERFCS is a new system intended to provide enhanced functions to meet NRC post-TMI guidelines. The PPCS is intended to replace and upgrade an existing obsolete plant computer system. A general overview of the hardware and software aspects of the replacement and upgrade is presented. The work done to develop the upgraded Man-Machine Interface is described. For the ERFCS, a detailed discussion is presented of the work done to develop logic to evaluate the readiness and performance of safety systems and their supporting functions. The Man-Machine Interface considerations of reporting readiness and performance to the operator are discussed. Finally, the considerations involved in the implementation of this logic in real-time software are discussed.. For the PPCS, a detailed discussion is presented of some new features

An overview of regulatory, environmental and social siting considerations

Energy Technology Data Exchange (ETDEWEB)

Jones, Jason [Tetra Tech (United States)

2011-07-01

There is the potential for involvement of different levels of government and many other actors in the location and, finally, the feasibility of a modern wind energy project. This paper gives an overview of the social, regulatory, and environmental considerations that can influence the location of a wind energy project. At the beginning the site has to be identified and wind resources and transmission feasibility have to be assessed. Environmental and engineering issues and public and government acceptability have to be considered. Federal, provincial, local and municipal considerations are discussed. A fatal flaw analysis also known as Critical Issues Analysis (CIA) is performed and the results are given. Constructability issues, telecommunications and aviation screening are omitted from the CIA. Different reasons for setbacks and causes of concern are mentioned and explained. Bird and bat fatalities from collision with turbines are mentioned as a concern. Studies relating to matters of heritage and cultural resources have also been conducted. Finally, issues relating to socioeconomic impact, communications infrastructure and transportation issues are discussed.

Passivity of memristive BAM neural networks with leakage and additive time-varying delays

Science.gov (United States)

Wang, Weiping; Wang, Meiqi; Luo, Xiong; Li, Lixiang; Zhao, Wenbing; Liu, Linlin; Ping, Yuan

2018-02-01

This paper investigates the passivity of memristive bidirectional associate memory neural networks (MBAMNNs) with leakage and additive time-varying delays. Based on some useful inequalities and appropriate Lyapunov-Krasovskii functionals (LKFs), several delay-dependent conditions for passivity performance are obtained in linear matrix inequalities (LMIs). Moreover, the leakage delays as well as additive delays are considered separately. Finally, numerical simulations are provided to demonstrate the feasibility of the theoretical results.

A Multidisciplinary Performance Analysis of a Lifting-Body Single-Stage-to-Orbit Vehicle

Science.gov (United States)

Tartabini, Paul V.; Lepsch, Roger A.; Korte, J. J.; Wurster, Kathryn E.

2000-01-01

Lockheed Martin Skunk Works (LMSW) is currently developing a single-stage-to-orbit reusable launch vehicle called VentureStar(TM) A team at NASA Langley Research Center participated with LMSW in the screening and evaluation of a number of early VentureStar(TM) configurations. The performance analyses that supported these initial studies were conducted to assess the effect of a lifting body shape, linear aerospike engine and metallic thermal protection system (TPS) on the weight and performance of the vehicle. These performance studies were performed in a multidisciplinary fashion that indirectly linked the trajectory optimization with weight estimation and aerothermal analysis tools. This approach was necessary to develop optimized ascent and entry trajectories that met all vehicle design constraints. Significant improvements in ascent performance were achieved when the vehicle flew a lifting trajectory and varied the engine mixture ratio during flight. Also, a considerable reduction in empty weight was possible by adjusting the total oxidizer-to-fuel and liftoff thrust-to-weight ratios. However, the optimal ascent flight profile had to be altered to ensure that the vehicle could be trimmed in pitch using only the flow diverting capability of the aerospike engine. Likewise, the optimal entry trajectory had to be tailored to meet TPS heating rate and transition constraints while satisfying a crossrange requirement.

Estimating time-varying exposure-outcome associations using case-control data: logistic and case-cohort analyses

Directory of Open Access Journals (Sweden)

Ruth H. Keogh

2016-01-01

Full Text Available Abstract Background Traditional analyses of standard case-control studies using logistic regression do not allow estimation of time-varying associations between exposures and the outcome. We present two approaches which allow this. The motivation is a study of vaccine efficacy as a function of time since vaccination. Methods Our first approach is to estimate time-varying exposure-outcome associations by fitting a series of logistic regressions within successive time periods, reusing controls across periods. Our second approach treats the case-control sample as a case-cohort study, with the controls forming the subcohort. In the case-cohort analysis, controls contribute information at all times they are at risk. Extensions allow left truncation, frequency matching and, using the case-cohort analysis, time-varying exposures. Simulations are used to investigate the methods. Results The simulation results show that both methods give correct estimates of time-varying effects of exposures using standard case-control data. Using the logistic approach there are efficiency gains by reusing controls over time and care should be taken over the definition of controls within time periods. However, using the case-cohort analysis there is no ambiguity over the definition of controls. The performance of the two analyses is very similar when controls are used most efficiently under the logistic approach. Conclusions Using our methods, case-control studies can be used to estimate time-varying exposure-outcome associations where they may not previously have been considered. The case-cohort analysis has several advantages, including that it allows estimation of time-varying associations as a continuous function of time, while the logistic regression approach is restricted to assuming a step function form for the time-varying association.

Bit-level plane image encryption based on coupled map lattice with time-varying delay

Science.gov (United States)

Lv, Xiupin; Liao, Xiaofeng; Yang, Bo

2018-04-01

Most of the existing image encryption algorithms had two basic properties: confusion and diffusion in a pixel-level plane based on various chaotic systems. Actually, permutation in a pixel-level plane could not change the statistical characteristics of an image, and many of the existing color image encryption schemes utilized the same method to encrypt R, G and B components, which means that the three color components of a color image are processed three times independently. Additionally, dynamical performance of a single chaotic system degrades greatly with finite precisions in computer simulations. In this paper, a novel coupled map lattice with time-varying delay therefore is applied in color images bit-level plane encryption to solve the above issues. Spatiotemporal chaotic system with both much longer period in digitalization and much excellent performances in cryptography is recommended. Time-varying delay embedded in coupled map lattice enhances dynamical behaviors of the system. Bit-level plane image encryption algorithm has greatly reduced the statistical characteristics of an image through the scrambling processing. The R, G and B components cross and mix with one another, which reduces the correlation among the three components. Finally, simulations are carried out and all the experimental results illustrate that the proposed image encryption algorithm is highly secure, and at the same time, also demonstrates superior performance.

Marketingový mix HC Enegie Karlovy Vary

OpenAIRE

Štrobl, Adam

2016-01-01

Title: Marketing mix of HC Energie Karlovy Vary Objectives: This thesis is based on a questionnaire responses obtained from HC Energie Karlovy Vary fans. Its objective is focused on evaluation of their opinions on the marketing mix, their subsequent interpretation, and finally even development of recommendations for improvement based on previous analysis. Methods: Two methods are used to analyse the marketing mix. The first method is qualitative participant observation. The second method is a...

Õunpuu Karlovy Varys edukas

Index Scriptorium Estoniae

2010-01-01

45. Karlovy Vary filmifestivali võistlusprogrammis "East of the West" märgiti ära Veiko Õunpuu film "Püha Tõnu kiusamine". Peaauhind läks rumeenlase Cristi Puiu filmile "Aurora". Grand prix´sai Augustĺ Vila film "La mosquitera". Teisi preemiasaajaid

Retrievability of high-level nuclear waste from geologic repositories - Regulatory and rock mechanics/design considerations

International Nuclear Information System (INIS)

Tanious, N.S.; Nataraja, M.S.; Daemen, J.J.K.

1987-01-01

Retrievability of nuclear waste from high-level geologic repositories is one of the performance objectives identified in 10CFR60 (Code of Federal Regulations, 1985). 10CFR60.111 states that the geologic repository operations area shall be designed to preserve the option of waste retrieval. In designing the repository operations area, rock mechanics considerations play a major role especially in evaluating the feasibility of retrieval operations. This paper discusses generic considerations affecting retrievability as they relate to repository design, construction, and operation, with emphasis on regulatory and rock mechanics aspects

Systems considerations in seismic margin evaluations

International Nuclear Information System (INIS)

Buttermer, D.R.

1987-01-01

Increasing knowledge in the geoscience field has led to the understanding that, although highly unlikely, it is possible for a nuclear power plant to be subjected to earthquake ground motion greater than that for which the plant was designed. While it is recognized that there are conservatisms inherent in current design practices, interest has developed in evaluating the seismic risk of operating plants. Several plant-specific seismic probabilistic risk assessments (SPRA) have been completed to address questions related to the seismic risk of a plant. The results from such SPRAs are quite informative, but such studies may entail a considerable amount of expensive analysis of large portions of the plant. As an alternative to an SPRA, it may be more practical to select an earthquake level above the design basis for which plant survivability is to be demonstrated. The principal question to be addressed in a seismic margin evaluation is: At what ground motion levels does one have a high confidence that the probability of seismically induced core damage is sufficiently low? In a seismic margin evaluation, an earthquake level is selected (based on site-specific geoscience considerations) for which a stable, long-term safe shutdown condition is to be demonstrated. This prespecified earthquake level is commonly referred to as the seismic margin earthquake (SME). The Electric Power Research Institute is currently supporting a research project to develop procedures for use by the utilities to allow them to perform nuclear plant seismic margin evaluations. This paper describes the systems-related aspects of these procedures

Do effects of common case-mix adjusters on patient experiences vary across patient groups?

Science.gov (United States)

de Boer, Dolf; van der Hoek, Lucas; Rademakers, Jany; Delnoij, Diana; van den Berg, Michael

2017-11-22

Many survey studies in health care adjust for demographic characteristics such as age, gender, educational attainment and general health when performing statistical analyses. Whether the effects of these demographic characteristics are consistent between patient groups remains to be determined. This is important as the rationale for adjustment is often that demographic sub-groups differ in their so-called 'response tendency'. This rationale may be less convincing if the effects of response tendencies vary across patient groups. The present paper examines whether the impact of these characteristics on patients' global rating of care varies across patient groups. Secondary analyses using multi-level regression models were performed on a dataset including 32 different patient groups and 145,578 observations. For each demographic variable, the 95% expected range of case-mix coefficients across patient groups is presented. In addition, we report whether the variance of coefficients for demographic variables across patient groups is significant. Overall, men, elderly, lower educated people and people in good health tend to give higher global ratings. However, these effects varied significantly across patient groups and included the possibility of no effect or an opposite effect in some patient groups. The response tendency attributed to demographic characteristics - such as older respondents being milder, or higher educated respondents being more critical - is not general or universal. As such, the mechanism linking demographic characteristics to survey results on patient experiences with quality of care is more complicated than a general response tendency. It is possible that the response tendency interacts with patient group, but it is also possible that other mechanisms are at play.

Material and fabrication considerations for the CANDU-PHWR heat transport system

International Nuclear Information System (INIS)

Filipovic, A.; Price, E.G.; Barber, D.; Nickerson, J.

1987-03-01

CANDU PHWR nuclear systems have used carbon steel material for over 25 years. The accumulated operating experience of over 200 reactor years has proven this unique AECL approach to be both technically and economically attractive. This paper discusses design, material and fabrication considerations for out-reactor heat transport system major components. The contribution of this unique choice of materials and equipment to the outstanding CANDU performance is briefly covered

ACCOUNTING FOR CONTINGENT CONSIDERATIONS IN BUSINESS COMBINATIONS

OpenAIRE

Gurgen KALASHYAN

2017-01-01

According to IFRS 3 Business Combinations contingent considerations must be included in the total consideration given for the acquired entity along with cash, other assets, ordinary or preference equity instruments, options, warrants. The contingent consideration is the determined amount which acquiring entity has to pay to acquired entity provided, that certain conditions will be fulfilled in the future. In case the provisions are not satisfied, we will get the situation when the amount of c...

A global fouling factor methodology for analyzing steam generator thermal performance degradation

International Nuclear Information System (INIS)

Kreider, M.A.; White, G.A.; Varrin, R.D. Jr.

1998-06-01

Over the past few years, steam generator (SG) thermal performance degradation has led to decreased plant efficiency and power output at numerous PWR nuclear power plants with recirculating-type SGs. The authors have developed and implemented methodologies for quantitatively evaluating the various sources of SG performance degradation, both internal and external to the SG pressure boundary. These methodologies include computation of the global fouling factor history, evaluation of secondary deposit thermal resistance using deposit characterization data, and consideration of pressure loss causes unrelated to the tube bundle, such as hot-leg temperature streaming and SG moisture separator fouling. In order to evaluate the utility of the global fouling factor methodology, the authors performed case studies for a number of PWR SG designs. Key results from two of these studies are presented here. In tandem with the fouling-factor analyses, a study evaluated for each plant the potential causes of pressure loss. The combined results of the global fouling factor calculations and the pressure-loss evaluations demonstrated two key points: (1) that the available thermal margin against fouling, which can vary substantially from plant to plant, has an important bearing on whether a given plant exhibits losses in electrical generating capacity, and (2) that a wide variety of causes can result in SG thermal performance degradation

Basic considerations in predicting error probabilities in human task performance

International Nuclear Information System (INIS)

Fleishman, E.A.; Buffardi, L.C.; Allen, J.A.; Gaskins, R.C. III

1990-04-01

It is well established that human error plays a major role in the malfunctioning of complex systems. This report takes a broad look at the study of human error and addresses the conceptual, methodological, and measurement issues involved in defining and describing errors in complex systems. In addition, a review of existing sources of human reliability data and approaches to human performance data base development is presented. Alternative task taxonomies, which are promising for establishing the comparability on nuclear and non-nuclear tasks, are also identified. Based on such taxonomic schemes, various data base prototypes for generalizing human error rates across settings are proposed. 60 refs., 3 figs., 7 tabs

Geologic considerations for urban planning in seismic environment

International Nuclear Information System (INIS)

Agrawal, R.C.

1988-12-01

Even though it is desirable to visualize the performance of an entire metropolitan centre during earthquake occurrences as part of local hazards mitigation programme, yet these centres still remain vulnerable to major seismic activity. Geological considerations lack in urban planning and do not account for hazards mitigation. This may also be due to the involvement of several interdependent activities, like services, functions, life line elements, etc. The failure of any one of these can make the entire metropolitan area inoperative. It is recommended that multidisciplinary teams should undertake zoning studies for use in the future growth areas of Indian urban centres. (author). 5 refs, 1 fig., 2 tabs

A varying-coefficient method for analyzing longitudinal clinical trials data with nonignorable dropout

Science.gov (United States)

Forster, Jeri E.; MaWhinney, Samantha; Ball, Erika L.; Fairclough, Diane

2011-01-01

Dropout is common in longitudinal clinical trials and when the probability of dropout depends on unobserved outcomes even after conditioning on available data, it is considered missing not at random and therefore nonignorable. To address this problem, mixture models can be used to account for the relationship between a longitudinal outcome and dropout. We propose a Natural Spline Varying-coefficient mixture model (NSV), which is a straightforward extension of the parametric Conditional Linear Model (CLM). We assume that the outcome follows a varying-coefficient model conditional on a continuous dropout distribution. Natural cubic B-splines are used to allow the regression coefficients to semiparametrically depend on dropout and inference is therefore more robust. Additionally, this method is computationally stable and relatively simple to implement. We conduct simulation studies to evaluate performance and compare methodologies in settings where the longitudinal trajectories are linear and dropout time is observed for all individuals. Performance is assessed under conditions where model assumptions are both met and violated. In addition, we compare the NSV to the CLM and a standard random-effects model using an HIV/AIDS clinical trial with probable nonignorable dropout. The simulation studies suggest that the NSV is an improvement over the CLM when dropout has a nonlinear dependence on the outcome. PMID:22101223

Some Design Considerations on the Electrostatically Actuated Fixed-Fixed End Type MEMS Switches

International Nuclear Information System (INIS)

Sadeghian, Hamed; Rezazadeh, Ghader; Sani, Ebrahim Abbaspour

2006-01-01

The nonlinear electrostatic pull-in behaviour of MEMS Switches in micro-electromechanical systems (MEMS) is investigated in this article. We used the distributed model when the electrostatic pressure didn't apply at the whole of the beam and applied only in the mid-part of the beam. In this part the electrostatic area is different from two other parts. The model uses Euler-Bernoulli beam theory for fixed-fixed end type beams. The finite difference method was used to solve the nonlinear equation. The proposed model includes the fringing effects of the electrical field, residual stress and varying electrostatic area effects. The numerical results reveal that the profile deflection of the MEMS Switch may not only influence the distribution of the electrostatic force but also considerably change the nonlinear pull-in voltage

Dual Extended Kalman Filter for the Identification of Time-Varying Human Manual Control Behavior

Science.gov (United States)

Popovici, Alexandru; Zaal, Peter M. T.; Pool, Daan M.

2017-01-01

A Dual Extended Kalman Filter was implemented for the identification of time-varying human manual control behavior. Two filters that run concurrently were used, a state filter that estimates the equalization dynamics, and a parameter filter that estimates the neuromuscular parameters and time delay. Time-varying parameters were modeled as a random walk. The filter successfully estimated time-varying human control behavior in both simulated and experimental data. Simple guidelines are proposed for the tuning of the process and measurement covariance matrices and the initial parameter estimates. The tuning was performed on simulation data, and when applied on experimental data, only an increase in measurement process noise power was required in order for the filter to converge and estimate all parameters. A sensitivity analysis to initial parameter estimates showed that the filter is more sensitive to poor initial choices of neuromuscular parameters than equalization parameters, and bad choices for initial parameters can result in divergence, slow convergence, or parameter estimates that do not have a real physical interpretation. The promising results when applied to experimental data, together with its simple tuning and low dimension of the state-space, make the use of the Dual Extended Kalman Filter a viable option for identifying time-varying human control parameters in manual tracking tasks, which could be used in real-time human state monitoring and adaptive human-vehicle haptic interfaces.

Retrieving Unobserved Consideration Sets from Household Panel Data

NARCIS (Netherlands)

van Nierop, Erjen; Bronnenberg, Bart; Paap, Richard; Wedel, Michel; Franses, Philip Hans

The authors propose a new model to capture unobserved consideration from discrete choice data. This approach allows for unobserved dependence in consideration among brands, easily copes with many brands, and accommodates different effects of the marketing mix on consideration and choice as well as

High performance homes

DEFF Research Database (Denmark)

Beim, Anne; Vibæk, Kasper Sánchez

2014-01-01

Can prefabrication contribute to the development of high performance homes? To answer this question, this chapter defines high performance in more broadly inclusive terms, acknowledging the technical, architectural, social and economic conditions under which energy consumption and production occur....... Consideration of all these factors is a precondition for a truly integrated practice and as this chapter demonstrates, innovative project delivery methods founded on the manufacturing of prefabricated buildings contribute to the production of high performance homes that are cost effective to construct, energy...

Comparative analysis of the performance of string and central inverter topology at a large PV utility plant with varying topography

DEFF Research Database (Denmark)

Paasch, Kasper; Nymand, Morten; Kjær, Søren Bækhøj

2015-01-01

MPPT) and a series of small central inverters (60 kW, 1 MPPT) in the same PV plant under varying irradiation conditions and also including the potential detrimental effect of the horizontally tilt of the solar panels due to area topography variation. It has been shown that the gain from using multiple...

Game theoretic considerations for Kenyan health governance ...

African Journals Online (AJOL)

Game theoretic considerations for Kenyan health governance. ... theoretic considerations in their practice in order to achieve market-driven competition ... Key words: Game theory, social capital, good governance, health policy, health systems.

Mobile Robot Positioning with 433-MHz Wireless Motes with Varying Transmission Powers and a Particle Filter.

Science.gov (United States)

Canedo-Rodriguez, Adrian; Rodriguez, Jose Manuel; Alvarez-Santos, Victor; Iglesias, Roberto; Regueiro, Carlos V

2015-04-30

In wireless positioning systems, the transmitter's power is usually fixed. In this paper, we explore the use of varying transmission powers to increase the performance of a wireless localization system. To this extent, we have designed a robot positioning system based on wireless motes. Our motes use an inexpensive, low-power sub-1-GHz system-on-chip (CC1110) working in the 433-MHz ISM band. Our localization algorithm is based on a particle filter and infers the robot position by: (1) comparing the power received with the expected one; and (2) integrating the robot displacement. We demonstrate that the use of transmitters that vary their transmission power over time improves the performance of the wireless positioning system significantly, with respect to a system that uses fixed power transmitters. This opens the door for applications where the robot can localize itself actively by requesting the transmitters to change their power in real time.

Mobile Robot Positioning with 433-MHz Wireless Motes with Varying Transmission Powers and a Particle Filter

Directory of Open Access Journals (Sweden)

Adrian Canedo-Rodriguez

2015-04-01

Full Text Available In wireless positioning systems, the transmitter’s power is usually fixed. In this paper, we explore the use of varying transmission powers to increase the performance of a wireless localization system. To this extent, we have designed a robot positioning system based on wireless motes. Our motes use an inexpensive, low-power sub-1-GHz system-on-chip (CC1110 working in the 433-MHz ISM band. Our localization algorithm is based on a particle filter and infers the robot position by: (1 comparing the power received with the expected one; and (2 integrating the robot displacement. We demonstrate that the use of transmitters that vary their transmission power over time improves the performance of the wireless positioning system significantly, with respect to a system that uses fixed power transmitters. This opens the door for applications where the robot can localize itself actively by requesting the transmitters to change their power in real time.

Antibody responses to Borrelia burgdorferi detected by western blot vary geographically in Canada

OpenAIRE

Ogden, Nicholas H.; Arsenault, Julie; Hatchette, Todd F.; Mechai, Samir; Lindsay, L. Robbin

2017-01-01

Lyme disease is emerging in eastern and central Canada, and most cases are diagnosed using the two-tier serological test (Enzyme Immuno Assay [EIA] followed by Western blot [WB]). Simplification of this algorithm would be advantageous unless it impacts test performance. In this study, accuracy of individual proteins of the IgG WB algorithm in predicting the overall test result in samples from Canadians was assessed. Because Borrelia burgdorferi strains vary geographically in Canada, geographi...

Testing for Change in Mean of Independent Multivariate Observations with Time Varying Covariance

Directory of Open Access Journals (Sweden)

Mohamed Boutahar

2012-01-01

Full Text Available We consider a nonparametric CUSUM test for change in the mean of multivariate time series with time varying covariance. We prove that under the null, the test statistic has a Kolmogorov limiting distribution. The asymptotic consistency of the test against a large class of alternatives which contains abrupt, smooth and continuous changes is established. We also perform a simulation study to analyze the size distortion and the power of the proposed test.

Management of Epistaxis – A Single Centre Experience and Economic Considerations

LENUS (Irish Health Repository)

Keane, E

2016-06-01

Epistaxis represents the most common ENT emergency and its management has been a focus of audit recently, with consideration given to the associated economic burden. The aim of our study is to evaluate the management of epistaxis in terms of treatments used, duration of stay, recurrence and cost. A retrospective review of hospital inpatient enquiry (HIPE) data from a single secondary referral centre was undertaken during a four year period. Four hundrefd and thirty-four patients were identified. The majority (n= 262, 60.3%) were male and the average age was 64.2 years. The vast majority (n=362, 83.4%) were managed non-operatively. Only 15 patients (3.4%) were managed surgically. The average length of stay was 2.5 days and did not vary greatly between the treatment groups. The recurrence rate was 8.2% (n=36). Approximate costs of packing vs EUA and cautery suggest that packing alone is more economical but more data is needed to fully compare the options.

Solution of Einstein's Geometrical Gravitational Field Equations Exterior to Astrophysically Real or Hypothetical Time Varying Distributions of Mass within Regions of Spherical Geometry

Directory of Open Access Journals (Sweden)

Chifu E. N.

2009-07-01

Full Text Available Here, we present a profound and complete analytical solution to Einstein’s gravitational field equations exterior to astrophysically real or hypothetical time varying distribu- tions of mass or pressure within regions of spherical geometry. The single arbitrary function f in our proposed exterior metric tensor and constructed field equations makes our method unique, mathematically less combersome and astrophysically satisfactory. The obtained solution of Einstein’s gravitational field equations tends out to be a gen- eralization of Newton’s gravitational scalar potential exterior to the spherical mass or pressure distribution under consideration

Control-focused, nonlinear and time-varying modelling of dielectric elastomer actuators with frequency response analysis

International Nuclear Information System (INIS)

Jacobs, William R; Dodd, Tony J; Anderson, Sean R; Wilson, Emma D; Porrill, John; Assaf, Tareq; Rossiter, Jonathan

2015-01-01

Current models of dielectric elastomer actuators (DEAs) are mostly constrained to first principal descriptions that are not well suited to the application of control design due to their computational complexity. In this work we describe an integrated framework for the identification of control focused, data driven and time-varying DEA models that allow advanced analysis of nonlinear system dynamics in the frequency-domain. Experimentally generated input–output data (voltage-displacement) was used to identify control-focused, nonlinear and time-varying dynamic models of a set of film-type DEAs. The model description used was the nonlinear autoregressive with exogenous input structure. Frequency response analysis of the DEA dynamics was performed using generalized frequency response functions, providing insight and a comparison into the time-varying dynamics across a set of DEA actuators. The results demonstrated that models identified within the presented framework provide a compact and accurate description of the system dynamics. The frequency response analysis revealed variation in the time-varying dynamic behaviour of DEAs fabricated to the same specifications. These results suggest that the modelling and analysis framework presented here is a potentially useful tool for future work in guiding DEA actuator design and fabrication for application domains such as soft robotics. (paper)

Aerodynamic performance of a vibrating piezoelectric fan under varied operational conditions

International Nuclear Information System (INIS)

Stafford, J; Jeffers, N

2014-01-01

This paper experimentally examines the bulk aerodynamic performance of a vibrating fan operating in the first mode of vibration. The influence of operating condition on the local velocity field has also been investigated to understand the flow distribution at the exit region and determine the stalling condition for vibrating fans. Fan motion has been generated and controlled using a piezoelectric ceramic attached to a stainless steel cantilever. The frequency and amplitude at resonance were 109.4 Hz and 12.5 mm, respectively. A test facility has been developed to measure the pressure-flow characteristics of the vibrating fan and simultaneously conduct local velocity field measurements using particle image velocimetry. The results demonstrate the impact of system characteristics on the local velocity field. High momentum regions generated due to the oscillating motion exist with a component direction that is tangent to the blade at maximum displacement. These high velocity zones are significantly affected by increasing impedance while flow reversal is a dominant feature at maximum pressure rise. The findings outlined provide useful information for design of thermal management solutions that may incorporate this air cooling approach.

Adaptive control of chaotic systems with stochastic time varying unknown parameters

Energy Technology Data Exchange (ETDEWEB)

Salarieh, Hassan [Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, P.O. Box 11365-9567, Azadi Avenue, Tehran (Iran, Islamic Republic of)], E-mail: salarieh@mech.sharif.edu; Alasty, Aria [Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, P.O. Box 11365-9567, Azadi Avenue, Tehran (Iran, Islamic Republic of)], E-mail: aalasti@sharif.edu

2008-10-15

In this paper based on the Lyapunov stability theorem, an adaptive control scheme is proposed for stabilizing the unstable periodic orbits (UPO) of chaotic systems. It is assumed that the chaotic system has some linearly dependent unknown parameters which are stochastically time varying. The stochastic parameters are modeled through the Weiner process derivative. To demonstrate the effectiveness of the proposed technique it has been applied to the Lorenz, Chen and Rossler dynamical systems, as some case studies. Simulation results indicate that the proposed adaptive controller has a high performance in stabilizing the UPO of chaotic systems in noisy environment.

Performance and Parasitology of Semi-intensively Managed West African Dwarf Sheep Exposed to Gastrointestinal Helminth Infect-ed Paddocks and Varied Protein-energy Feeds

Directory of Open Access Journals (Sweden)

Adekayode Olarinwaju SONIBARE

2016-12-01

Full Text Available Background: The performance and parasitology of semi-intensively managed West African dwarf (WAD lambs were evaluated following exposure to gastrointestinal helminth infected paddock and varied protein-energy feeds.Methods: Twenty four lambs obtained from the Department of Animal Breeding and Genetics and brought to Directorate of University farm (DUFARM of Federal University of Agriculture Abeokuta, Ogun state, Nigeria, where the research was carried out in 2014, were grouped into four each containing six animals based on different energy-protein feed combination thus; group 1(G1 low energy low protein, group 2 (G2 low energy high protein, group 3 (G3 high energy low protein and group 4 (G4 high energy high protein. Experimental animals were supplemented with concentrate feed after grazing on daily in a nematode infected paddock. Clinical signs of infection were monitored. Live weight, faecal egg count (FEC, worm counts, packed cell volume (PCV, haemoglobin concentration (Hb and red blood cell count (RBC were determined using standard methods.Results: Anorexia and intermittent diarrhea were the observed signs. Worm counts did not differ significantly (P=0.309 among the groups. The weight and FEC differed significantly (P˂0.05 across the days and among the groups, while haematological parameters increased significantly (P˂0.05 across the days and among the groups.Conclusion: Lambs in G2 followed by G4 showed improved parameters and superior performance when compared to the other groups. It is therefore recommended that feed high in protein content is capable of mitigating deleterious effect of gastrointestinal helminth parasitism.

IAD value at harvest as a predictor for ‘Anjou’ fruit storage performance

Science.gov (United States)

Anjou pears produced in the PNW are single picked and can have considerable fruit maturity variability at harvest. Assessment of chlorophyll in and several mm below the peel using differential absorbance (IAD) is a means to identify populations of fruit of varying maturity within single trees. Thi...

Numerical modeling of rapidly varying flows using HEC-RAS and WSPG models.

Science.gov (United States)

Rao, Prasada; Hromadka, Theodore V

2016-01-01

The performance of two popular hydraulic models (HEC-RAS and WSPG) for modeling hydraulic jump in an open channel is investigated. The numerical solutions are compared with a new experimental data set obtained for varying channel bottom slopes and flow rates. Both the models satisfactorily predict the flow depths and location of the jump. The end results indicate that the numerical models output is sensitive to the value of chosen roughness coefficient. For this application, WSPG model is easier to implement with few input variables.

Feedback topology and XOR-dynamics in Boolean networks with varying input structure.

Science.gov (United States)

Ciandrini, L; Maffi, C; Motta, A; Bassetti, B; Cosentino Lagomarsino, M

2009-08-01

We analyze a model of fixed in-degree random Boolean networks in which the fraction of input-receiving nodes is controlled by the parameter gamma. We investigate analytically and numerically the dynamics of graphs under a parallel XOR updating scheme. This scheme is interesting because it is accessible analytically and its phenomenology is at the same time under control and as rich as the one of general Boolean networks. We give analytical formulas for the dynamics on general graphs, showing that with a XOR-type evolution rule, dynamic features are direct consequences of the topological feedback structure, in analogy with the role of relevant components in Kauffman networks. Considering graphs with fixed in-degree, we characterize analytically and numerically the feedback regions using graph decimation algorithms (Leaf Removal). With varying gamma , this graph ensemble shows a phase transition that separates a treelike graph region from one in which feedback components emerge. Networks near the transition point have feedback components made of disjoint loops, in which each node has exactly one incoming and one outgoing link. Using this fact, we provide analytical estimates of the maximum period starting from topological considerations.

Feedback topology and XOR-dynamics in Boolean networks with varying input structure

Science.gov (United States)

Ciandrini, L.; Maffi, C.; Motta, A.; Bassetti, B.; Cosentino Lagomarsino, M.

2009-08-01

We analyze a model of fixed in-degree random Boolean networks in which the fraction of input-receiving nodes is controlled by the parameter γ . We investigate analytically and numerically the dynamics of graphs under a parallel XOR updating scheme. This scheme is interesting because it is accessible analytically and its phenomenology is at the same time under control and as rich as the one of general Boolean networks. We give analytical formulas for the dynamics on general graphs, showing that with a XOR-type evolution rule, dynamic features are direct consequences of the topological feedback structure, in analogy with the role of relevant components in Kauffman networks. Considering graphs with fixed in-degree, we characterize analytically and numerically the feedback regions using graph decimation algorithms (Leaf Removal). With varying γ , this graph ensemble shows a phase transition that separates a treelike graph region from one in which feedback components emerge. Networks near the transition point have feedback components made of disjoint loops, in which each node has exactly one incoming and one outgoing link. Using this fact, we provide analytical estimates of the maximum period starting from topological considerations.

40 CFR 122.49 - Considerations under Federal law.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Considerations under Federal law. 122... Conditions § 122.49 Considerations under Federal law. The following is a list of Federal laws that may apply... must be followed. When the applicable law requires consideration or adoption of particular permit...

State/Federal Regulatory Considerations

Science.gov (United States)

This page contains presentations from the Brown to Green: Make the Connection to Renewable Energy workshop held in Santa Fe, New Mexico, during December 10-11, 2008, regarding State/Federal Regulatory Considerations.

How and Why Do Number-Space Associations Co-Vary in Implicit and Explicit Magnitude Processing Tasks?

Directory of Open Access Journals (Sweden)

Carrie Georges

2017-12-01

Full Text Available Evidence for number-space associations in implicit and explicit magnitude processing tasks comes from the parity and magnitude SNARC effect respectively. Different spatial accounts were suggested to underlie these spatial-numerical associations (SNAs with some inconsistencies in the literature. To determine whether the parity and magnitude SNAs arise from a single predominant account or task-dependent coding mechanisms, we adopted an individual differences approach to study their correlation and the extent of their association with arithmetic performance, spatial visualization ability and visualization profile. Additionally, we performed moderation analyses to determine whether the relation between these SNAs depended on individual differences in those cognitive factors. The parity and magnitude SNAs did not correlate and were differentially predicted by arithmetic performance and visualization profile respectively. These variables, however, also moderated the relation between the SNAs. While positive correlations were observed in object-visualizers with lower arithmetic performances, correlations were negative in spatial-visualizers with higher arithmetic performances. This suggests the predominance of a single account for both implicit and explicit SNAs in the two types of visualizers. However, the spatial nature of the account differs between object- and spatial-visualizers. No relation occurred in mixed-visualizers, indicating the activation of task-dependent coding mechanisms. Individual differences in arithmetic performance and visualization profile thus determined whether SNAs in implicit and explicit tasks co-varied and supposedly relied on similar or unrelated spatial coding mechanisms. This explains some inconsistencies in the literature regarding SNAs and highlights the usefulness of moderation analyses for understanding how the relation between different numerical concepts varies between individuals.

Response-only modal identification using random decrement algorithm with time-varying threshold level

International Nuclear Information System (INIS)

Lin, Chang Sheng; Tseng, Tse Chuan

2014-01-01

Modal Identification from response data only is studied for structural systems under nonstationary ambient vibration. The topic of this paper is the estimation of modal parameters from nonstationary ambient vibration data by applying the random decrement algorithm with time-varying threshold level. In the conventional random decrement algorithm, the threshold level for evaluating random dec signatures is defined as the standard deviation value of response data of the reference channel. The distortion of random dec signatures may be, however, induced by the error involved in noise from the original response data in practice. To improve the accuracy of identification, a modification of the sampling procedure in random decrement algorithm is proposed for modal-parameter identification from the nonstationary ambient response data. The time-varying threshold level is presented for the acquisition of available sample time history to perform averaging analysis, and defined as the temporal root-mean-square function of structural response, which can appropriately describe a wide variety of nonstationary behaviors in reality, such as the time-varying amplitude (variance) of a nonstationary process in a seismic record. Numerical simulations confirm the validity and robustness of the proposed modal-identification method from nonstationary ambient response data under noisy conditions.

Design considerations for mechanical snubbers

International Nuclear Information System (INIS)

Severud, L.K.; Summers, G.D.

1980-03-01

The use of mechanical snubbers to restrain piping during an earthquake event is becoming more common in design of nuclear power plants. The design considerations and qualification procedures for mechanical snubbers used on the Fast Flux Test Facility will be presented. Design precautions and requirements for both normal operation and seismic operation are necessary. Effects of environmental vibration (nonseismic) induced through the piping by pump shaft imbalance and fluid flow oscillations will be addressed. Also, the snubber dynamic characteristics of interest to design and snubber design application considerations will be discussed

Optimistlik Karlovy Vary / Jaan Ruus

Index Scriptorium Estoniae

Ruus, Jaan, 1938-2017

2007-01-01

42. Karlovy Vary rahvusvahelise filmifestivali auhinnatud filmidest (žürii esimees Peter Bart). Kristallgloobuse sai Islandi-Saksamaa "Katseklaasilinn" (režii Baltasar Kormakur), parimaks režissööriks tunnistati norralane Bard Breien ("Negatiivse mõtlemise kunst"). Austraallase Michael James Rowlandi "Hea õnne teekond" sai žürii eripreemia

Central Cardiovascular Responses of Quadriplegic Subjects to Arm Exercise at Varying Levels of Oxygen Uptake.

Science.gov (United States)

Figoni, Stephen F.

The purpose of this study was to assess selected central cardiovascular functions of spinal cord injured, quadriplegic subjects at varying levels of oxygen uptake (VO sub 2). Subjects included 11 untrained, male college students with C5, C6, or C7 complete quadriplegia and 11 able-bodied reference subjects. Exercise was performed on a Monark cycle…

40 CFR 270.3 - Considerations under Federal law.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Considerations under Federal law. 270... Considerations under Federal law. The following is a list of Federal laws that may apply to the issuance of... applicable law requires consideration or adoption of particular permit conditions or requires the denial of a...

Naval Reactors Prime Contractor Team (NRPCT) Experiences and Considerations With Irradiation Test Performance in an International Environment

International Nuclear Information System (INIS)

MH Lane

2006-01-01

This letter forwards a compilation of knowledge gained regarding international interactions and issues associated with Project Prometheus. The following topics are discussed herein: (1) Assessment of international fast reactor capability and availability; (2) Japanese fast reactor (JOYO) contracting strategy; (3) NRPCT/Program Office international contract follow; (4) Completion of the Japan Atomic Energy Agency (JAEA)/Pacific Northwest National Laboratory (PNNL) contract for manufacture of reactor test components; (5) US/Japanese Departmental interactions and required Treaties and Agreements; and (6) Non-technical details--interactions and considerations

Naval Reactors Prime Contractor Team (NRPCT) Experiences and Considerations With Irradiation Test Performance in an International Environment

Energy Technology Data Exchange (ETDEWEB)

MH Lane

2006-02-15

This letter forwards a compilation of knowledge gained regarding international interactions and issues associated with Project Prometheus. The following topics are discussed herein: (1) Assessment of international fast reactor capability and availability; (2) Japanese fast reactor (JOYO) contracting strategy; (3) NRPCT/Program Office international contract follow; (4) Completion of the Japan Atomic Energy Agency (JAEA)/Pacific Northwest National Laboratory (PNNL) contract for manufacture of reactor test components; (5) US/Japanese Departmental interactions and required Treaties and Agreements; and (6) Non-technical details--interactions and considerations.

Considerações sobre a aprendizagem da performance musical Considerations about music performance learning

Directory of Open Access Journals (Sweden)

Daniel Lemos Cerqueira

2012-12-01

Full Text Available Este artigo oferece uma proposta para fundamentação da prática musical de instrumentos e canto, enfatizando procedimentos de estudo, baseando-se principalmente na Teoria da Aprendizagem Pianística de José Alberto Kaplan. Paralelamente, foi realizada uma breve releitura crítica da história do ensino de instrumentos musicais e métodos para educação musical, em diálogo com áreas afins à Performance Musical, entre elas Psicologia Cognitiva, Neurociência e Educação Física.The present work offers a systematized proposal for the practice of musical instruments and singing, emphasizing study procedures. The main basis for this work is the Pianistic Learning Theory (Teoria da Aprendizagem Pianística by Brazilian pedagogue José Alberto Kaplan. There is also a brief critical overview of the history of musical instrument learning and music education methods, dialoguing with areas such as Cognitive Psychology, Neuroscience and Physical Education.

Performance of Brazilian Companies: Year Effects, Line of Business and Individual Firms

Directory of Open Access Journals (Sweden)

Luiz Artur Ledur Brito

2004-07-01

Full Text Available Performance varies. This simple statement conceals many intricacies of strategic management. Because performance varies among individual firms, researchers can explore factors that differentiate these firms and explain why some firms are consistently outperforming others. Because performance varies among industries, researchers can explore structural characteristics of different branches of accounting as a source of explanation. Because performance varies with time, researchers can explore environmental and internal dynamic elements that drive strategic decision-making. In reality,measuring and analyzing performance is a very complicated issue when performance varies simultaneously from firm to firm, from industry to industry and from year to year. The theoretical discussion behind this question is the relative importance of the industrial organization derived approach to strategy versus the resource-based view. This paper analyzes the composition of performance variance of a set of Brazilian firms from 1998 to 2001. The results demonstrate that firm effects are still dominant, with year and industry effects being lower, as previous studies with North American firms have indicated.

Decentralized H∞ Control of Interconnected Systems with Time-varying Delays

Directory of Open Access Journals (Sweden)

Amal Zouhri

2017-01-01

Full Text Available This paper focuses on the problem of delay dependent stability/stabilization of interconnected systems with time-varying delays. The approach is based on a new Lyapunov-Krasovskii functional. A decentralized delay-dependent stability analysis is performed to characterize linear matrix inequalities (LMIs based on the conditions under which every local subsystem of the linear interconnected delay system is asymptotically stable. Then we design a decentralized state-feedback stabilization scheme such that the family of closedloop feedback subsystems enjoys the delay-dependent asymptotic stability for each subsystem. The decentralized feedback gains are determined by convex optimization over LMIs. All the developed results are tested on a representative example and compared with some recent previous ones.

Experimental evidence for amplitude death induced by a time-varying interaction

Energy Technology Data Exchange (ETDEWEB)

Suresh, K. [Centre for Nonlinear Dynamics, School of Physics, Bharathidasan University, Tiruchirappalli 620024, Tamil Nadu (India); Shrimali, M.D. [Department of Physics, Central University of Rajasthan, NH-8, Bandar Sindri, Ajmer 305 801 (India); Prasad, Awadhesh [Department of Physics and Astrophysics, University of Delhi, Delhi 110 007 (India); Thamilmaran, K., E-mail: maran.cnld@gmail.com [Centre for Nonlinear Dynamics, School of Physics, Bharathidasan University, Tiruchirappalli 620024, Tamil Nadu (India)

2014-08-01

In this paper, we study the time-varying interaction in coupled oscillatory systems. For this purpose, we have designed a novel time-varying resistive network using an analog switch and inverter circuits. We have applied this time-varying resistive network to mutually coupled identical Chua's oscillators. When the resistances are varied in time, we find that amplitude death arises in coupled identical oscillators. This has been observed numerically as well as verified through hardware experiments. - Highlights: • We have implemented the time-varying interaction in coupled oscillatory systems. • We have designed a novel time-varying resistive network using an analog switch and inverter circuits. • When the resistances are varied in time, we find that amplitude death arises in coupled identical oscillators.

Brane world cosmologies with varying speed of light

International Nuclear Information System (INIS)

Youm, Donam

2001-02-01

We study cosmologies in the Randall-Sundrum models, incorporating the possibility of time-varying speed of light and Newton's constant. The cosmologies with varying speed of light (VSL) were proposed by Moffat and by Albrecht and Magueijo as an alternative to inflation for solving the cosmological problems. We consider the case in which the speed of light varies with time after the radion or the scale of the extra dimension has been stabilized. We elaborate on the conditions under which the flatness problem and the cosmological constant problem can be resolved. Particularly, the VSL cosmologies may provide a possible mechanism for bringing the quantum corrections to the fine-tuned brane tensions after the SUSY breaking under control. (author)

Risk assessment for improved treatment of health considerations in EIA

International Nuclear Information System (INIS)

Demidova, Olga; Cherp, Aleg

2005-01-01

Environmental Impact Assessment (EIA) and Risk Assessment (RA) processes are rarely used to complement each other despite potential benefits of such integration. This paper proposes a model for procedural and methodological integration of EIA and RA based on reported best practice approaches. The proposed model stipulates 'embedding' RA into EIA and is organized in accordance with the generic stages of the EIA process. The model forms the basis for the proposed Evaluation Package which can be used as a benchmarking tool for evaluating the effectiveness of integration of RA within particular EIAs. The current paper uses the package for evaluating seven Environmental Impact Statements (EISs) of waste incineration facilities in the UK produced between 1990 and 2000. Though RA was found to be an element of these EIAs, its prominence varied considerably from case to case. Systematic application of RA in accordance with the best practice was not observed. Particular omissions were demonstrated in assessing health impacts not directly associated with air emissions, identifying the receptors of health impacts (affected population), interpreting health impacts as health risks, dealing with uncertainties, and risk communications

Stochastic analysis of epidemics on adaptive time varying networks

Science.gov (United States)

Kotnis, Bhushan; Kuri, Joy

2013-06-01

Many studies investigating the effect of human social connectivity structures (networks) and human behavioral adaptations on the spread of infectious diseases have assumed either a static connectivity structure or a network which adapts itself in response to the epidemic (adaptive networks). However, human social connections are inherently dynamic or time varying. Furthermore, the spread of many infectious diseases occur on a time scale comparable to the time scale of the evolving network structure. Here we aim to quantify the effect of human behavioral adaptations on the spread of asymptomatic infectious diseases on time varying networks. We perform a full stochastic analysis using a continuous time Markov chain approach for calculating the outbreak probability, mean epidemic duration, epidemic reemergence probability, etc. Additionally, we use mean-field theory for calculating epidemic thresholds. Theoretical predictions are verified using extensive simulations. Our studies have uncovered the existence of an “adaptive threshold,” i.e., when the ratio of susceptibility (or infectivity) rate to recovery rate is below the threshold value, adaptive behavior can prevent the epidemic. However, if it is above the threshold, no amount of behavioral adaptations can prevent the epidemic. Our analyses suggest that the interaction patterns of the infected population play a major role in sustaining the epidemic. Our results have implications on epidemic containment policies, as awareness campaigns and human behavioral responses can be effective only if the interaction levels of the infected populace are kept in check.

Large-scale fortification of condiments and seasonings as a public health strategy: equity considerations for implementation.

Science.gov (United States)

Zamora, Gerardo; Flores-Urrutia, Mónica Crissel; Mayén, Ana-Lucia

2016-09-01

Fortification of staple foods with vitamins and minerals is an effective approach to increase micronutrient intake and improve nutritional status. The specific use of condiments and seasonings as vehicles in large-scale fortification programs is a relatively new public health strategy. This paper underscores equity considerations for the implementation of large-scale fortification of condiments and seasonings as a public health strategy by examining nonexhaustive examples of programmatic experiences and pilot projects in various settings. An overview of conceptual elements in implementation research and equity is presented, followed by an examination of equity considerations for five implementation strategies: (1) enhancing the capabilities of the public sector, (2) improving the performance of implementing agencies, (3) strengthening the capabilities and performance of frontline workers, (3) empowering communities and individuals, and (4) supporting multiple stakeholders engaged in improving health. Finally, specific considerations related to intersectoral action are considered. Large-scale fortification of condiments and seasonings cannot be a standalone strategy and needs to be implemented with concurrent and coordinated public health strategies, which should be informed by a health equity lens. © 2016 New York Academy of Sciences.

Some considerations about frequency tuning effects in ECRIS plasmas

International Nuclear Information System (INIS)

Mascali, D.; Gammino, S.; Celona, L.; Ciavola, G.; Neri, L.; Miracoli, R.; Gambino, N.; Castro, G.; Maimone, F.

2012-01-01

In the recent past many experiments demonstrated that slight variations of the microwave frequency used for the ignition of ECRIS plasmas strongly influence their performances (frequency tuning effect) either in terms of extracted current, of mean charge state and of beam emittance. According with theoretical investigations, this phenomenon can be explained by assuming that the plasma chamber works as a resonant cavity: the excited standing waves, whose spatial structure considerably changes with the pumping frequency, globally influences either the energy absorption rate and the plasma spatial structure. The paper is followed by the slides of the presentation. (authors)

A Novel Time-Varying Friction Compensation Method for Servomechanism

Directory of Open Access Journals (Sweden)

Bin Feng

2015-01-01

Full Text Available Friction is an inevitable nonlinear phenomenon existing in servomechanisms. Friction errors often affect their motion and contour accuracies during the reverse motion. To reduce friction errors, a novel time-varying friction compensation method is proposed to solve the problem that the traditional friction compensation methods hardly deal with. This problem leads to an unsatisfactory friction compensation performance and the motion and contour accuracies cannot be maintained effectively. In this method, a trapezoidal compensation pulse is adopted to compensate for the friction errors. A generalized regression neural network algorithm is used to generate the optimal pulse amplitude function. The optimal pulse duration function and the pulse amplitude function can be established by the pulse characteristic parameter learning and then the optimal friction compensation pulse can be generated. The feasibility of friction compensation method was verified on a high-precision X-Y worktable. The experimental results indicated that the motion and contour accuracies were improved greatly with reduction of the friction errors, in different working conditions. Moreover, the overall friction compensation performance indicators were decreased by more than 54% and this friction compensation method can be implemented easily on most of servomechanisms in industry.

Temporal lobe epilepsy with varying severity: MRI study of 222 patients

International Nuclear Information System (INIS)

Lehericy, S.; Hasboun, D.; Dormont, D.; Marsault, C.; Semah, F.; Baulac, M.; Clemenceau, S.; Granat, O.

1997-01-01

MRI was performed in 222 consecutive adult patients with temporal lobe epilepsy of varying severity from January 1991 to May 1993. The diagnosis of hippocampal sclerosis was established visually by three independent observers. The accuracy of visual assessment of hippocampal asymmetry was compared with volumetric measurements. Neuropathological correlations were obtained in 63 patients with refractory seizures. Temporal lobe abnormalities were observed in 180 patients (81 %) as follows: hippocampal sclerosis in 122 (55 %); developmental abnormalities in 16 (7.2 %); tumours in 15 (6.8 %); scars in 11 (5 %); cavernous angiomas in 10 (4.5 %); miscellaneous lesions in 6. MRI was normal or showed unrelated changes in 42 patients (19 %). Visual assessment correctly lateralised hippocampal sclerosis in 79 of the 84 patients measured (94 %). Temporal lobectomy confirmed the MRI data (side and aetiology) in all 63 operated patients. Patients with normal MRI had an older age of seizure onset and were more often drug-responsive than patients with hippocampal sclerosis. MRI showed temporal lobe abnormalities in 81 % of epileptic patients with varying severity with good neuropathological correlation. Patients with normal MRI had a less severe form of the disease. (orig.)

Varied Practice in Laparoscopy Training: Beneficial Learning Stimulation or Cognitive Overload?

Science.gov (United States)

Spruit, Edward N; Kleijweg, Luca; Band, Guido P H; Hamming, Jaap F

2016-01-01

Determining the optimal design for surgical skills training is an ongoing research endeavor. In education literature, varied practice is listed as a positive intervention to improve acquisition of knowledge and motor skills. In the current study we tested the effectiveness of a varied practice intervention during laparoscopy training. Twenty-four trainees (control group) without prior experience received a 3 weeks laparoscopic skills training utilizing four basic and one advanced training task. Twenty-eight trainees (experimental group) received the same training with a random training task schedule, more frequent task switching and inverted viewing conditions on the four basic training tasks, but not the advanced task. Results showed inferior performance of the experimental group on the four basic laparoscopy tasks during training, at the end of training and at a 2 months retention session. We assume the inverted viewing conditions have led to the deterioration of learning in the experimental group because no significant differences were found between groups on the only task that had not been practiced under inverted viewing conditions; the advanced laparoscopic task. Potential moderating effects of inter-task similarity, task complexity, and trainee characteristics are discussed.

Varied Practice in Laparoscopy Training: Beneficial Learning Stimulation or Cognitive Overload?

Directory of Open Access Journals (Sweden)

Edward N. eSpruit

2016-05-01

Full Text Available AbstractDetermining the optimal design for surgical skills training is an ongoing research endeavor. In education literature, varied practice is listed as a positive intervention to improve acquisition of knowledge and motor skills. In the current study we tested the effectiveness of a varied practice intervention during laparoscopy training. 24 trainees (control group without prior experience received a three week laparoscopic skills training utilizing four basic and one advanced training task. 28 trainees (experimental group received the same training with a random training task schedule, more frequent task switching and inverted viewing conditions on the four basic training tasks, but not the advanced task. Results showed inferior performance of the experimental group on the four basic laparoscopy tasks during training, at the end of training and at a two month retention session. We assume the inverted viewing conditions have led to the deterioration of learning in the experimental group because no significant differences were found between groups on the only task that had not been practiced under inverted viewing conditions; the advanced laparoscopic task. Potential moderating effects of inter-task similarity, task complexity and trainee characteristics are discussed.

Influence of Joint Angle on EMG-Torque Model During Constant-Posture, Torque-Varying Contractions.

Science.gov (United States)

Liu, Pu; Liu, Lukai; Clancy, Edward A

2015-11-01

Relating the electromyogram (EMG) to joint torque is useful in various application areas, including prosthesis control, ergonomics and clinical biomechanics. Limited study has related EMG to torque across varied joint angles, particularly when subjects performed force-varying contractions or when optimized modeling methods were utilized. We related the biceps-triceps surface EMG of 22 subjects to elbow torque at six joint angles (spanning 60° to 135°) during constant-posture, torque-varying contractions. Three nonlinear EMG σ -torque models, advanced EMG amplitude (EMG σ ) estimation processors (i.e., whitened, multiple-channel) and the duration of data used to train models were investigated. When EMG-torque models were formed separately for each of the six distinct joint angles, a minimum "gold standard" error of 4.01±1.2% MVC(F90) resulted (i.e., error relative to maximum voluntary contraction at 90° flexion). This model structure, however, did not directly facilitate interpolation across angles. The best model which did so achieved a statistically equivalent error of 4.06±1.2% MVC(F90). Results demonstrated that advanced EMG σ processors lead to improved joint torque estimation as do longer model training durations.

Analytical Frameworks of Cooperative and Cognitive Radio Systems with Practical Considerations

KAUST Repository

Khan, Fahd Ahmed

2013-08-01

Cooperative and cognitive radio systems have been proposed as a solution to improve the quality-of-service (QoS) and spectrum efficiency of existing communication systems. The objective of this dissertation is to propose and analyze schemes for cooperative and cognitive radio systems considering real world scenarios and to make these technologies implementable. In most of the research on cooperative relaying, it has been assumed that the communicating nodes have perfect channel state information (CSI). However, in reality, this is not the case and the nodes may only have an estimate of the CSI or partial knowledge of the CSI. Thus, in this dissertation, depending on the amount of CSI available, novel receivers are proposed to improve the performance of amplify-and forward relaying. Specifically, new coherent receivers are derived which do not perform channel estimation at the destination by using the received pilot signals directly for decoding. The derived receivers are based on new metrics that use distribution of the channels and the noise to achieve improved symbol-error-rate (SER) performance. The SER performance of the derived receivers is further improved by utilizing the decision history in the receivers. In cases where receivers with low complexity are desired, novel non-coherent receiver which detects the signal without knowledge of CSI is proposed. In addition, new receivers are proposed for the situation when only partial CSI is available at the destination i.e. channel knowledge of either the source-relay link or the relay-destination link but not both, is available. These receivers are termed as `half-coherent receivers\\' since they have channel-state-information of only one of the two links in the system. In practical systems, the CSI at the communicating terminals becomes outdated due to the time varying nature of the channel and results in system performance degradation. In this dissertation, the impact of using outdated CSI for relay selection on

Time-varying volatility in Malaysian stock exchange: An empirical study using multiple-volatility-shift fractionally integrated model

Science.gov (United States)

Cheong, Chin Wen

2008-02-01

This article investigated the influences of structural breaks on the fractionally integrated time-varying volatility model in the Malaysian stock markets which included the Kuala Lumpur composite index and four major sectoral indices. A fractionally integrated time-varying volatility model combined with sudden changes is developed to study the possibility of structural change in the empirical data sets. Our empirical results showed substantial reduction in fractional differencing parameters after the inclusion of structural change during the Asian financial and currency crises. Moreover, the fractionally integrated model with sudden change in volatility performed better in the estimation and specification evaluations.

4 CFR 22.2 - Board Consideration [Rule 2].

Science.gov (United States)

2010-01-01

... 4 Accounts 1 2010-01-01 2010-01-01 false Board Consideration [Rule 2]. 22.2 Section 22.2 Accounts... OFFICE CONTRACT APPEALS BOARD § 22.2 Board Consideration [Rule 2]. (a) Offices. The office of the Board... consideration of a matter by all members of the Contract Appeals Board will not be granted in any appeal filed...

Do effects of common case-mix adjusters on patient experiences vary across patient groups?

Directory of Open Access Journals (Sweden)

Dolf de Boer

2017-11-01

Full Text Available Abstract Background Many survey studies in health care adjust for demographic characteristics such as age, gender, educational attainment and general health when performing statistical analyses. Whether the effects of these demographic characteristics are consistent between patient groups remains to be determined. This is important as the rationale for adjustment is often that demographic sub-groups differ in their so-called ‘response tendency’. This rationale may be less convincing if the effects of response tendencies vary across patient groups. The present paper examines whether the impact of these characteristics on patients’ global rating of care varies across patient groups. Methods Secondary analyses using multi-level regression models were performed on a dataset including 32 different patient groups and 145,578 observations. For each demographic variable, the 95% expected range of case-mix coefficients across patient groups is presented. In addition, we report whether the variance of coefficients for demographic variables across patient groups is significant. Results Overall, men, elderly, lower educated people and people in good health tend to give higher global ratings. However, these effects varied significantly across patient groups and included the possibility of no effect or an opposite effect in some patient groups. Conclusion The response tendency attributed to demographic characteristics – such as older respondents being milder, or higher educated respondents being more critical – is not general or universal. As such, the mechanism linking demographic characteristics to survey results on patient experiences with quality of care is more complicated than a general response tendency. It is possible that the response tendency interacts with patient group, but it is also possible that other mechanisms are at play.

Performance assessment review for DOE LLW disposal facilities

International Nuclear Information System (INIS)

Wilhite, Elmer L.

1992-01-01

The United States Department of Energy (US DOE) disposes of low-level radioactive waste in near-surface disposal facilities. Safety of the disposal operations is evaluated for operational safety as well as long-term safety. Operational safety is evaluated based on the perceived level of hazard of the operation and may vary from a simple safety assessment to a safety analysis report. Long-term safety of all low-level waste disposal systems is evaluated through the conduct of a radiological performance assessment. The US DOE has established radiological performance objectives for disposal of low-level waste. They are to protect a member of the general public from receiving over 25 mrem/y, and an inadvertent intruder into the waste from receiving over 100 mrem/y continuous exposure or 500 mrem from a single exposure. For a disposal system to be acceptable, a performance assessment must be prepared which must be technically accurate and provide reasonable assurance that these performance objectives are met. Technical quality of the performance assessments is reviewed by a panel of experts. The panel of experts is used in two ways to assure the technical quality of performance assessment. A preliminary (generally 2 day) review by the panel is employed in the late stages of development to provide guidance on finalizing the performance assessment. The comments from this review are communicated to the personnel responsible for the performance assessment for consideration and incorporation. After finalizing the performance assessment, it is submitted for a formal review. The formal review is accomplished by a much more thorough analysis of the performance assessment over a multi-week time period. The panel then formally reports their recommendations to the US DOE waste management senior staff who make the final determination on acceptability of the performance assessment. A number of lessons have been learned from conducting several preliminary reviews of performance

Some considerations on the Tlatelolco Treaty

International Nuclear Information System (INIS)

Faria, N.M. de; Goes Fischer, M.D. de

1981-01-01

Some considerations related to the Tlatelolco Treaty are focused and so are the role and the position of Brazil in view of the Treaty. Short historical remarks are presented in order to show the commitments of Brazil with the Treaty. Finally, considerations concerned with the validity of the Treaty as the legal instrument to contribute to the security and peace in the World. (Author) [pt

Using advanced oxidation treatment for biofilm inactivation by varying water vapor content in air plasma

Science.gov (United States)

Ryota, Suganuma; Koichi, Yasuoka

2015-09-01

Biofilms are caused by environmental degradation in food factories and medical facilities. The inactivation of biofilms involves making them react with chemicals including chlorine, hydrogen peroxide, and ozone, although inactivation using chemicals has a potential problem because of the hazardous properties of the residual substance and hydrogen peroxide, which have slow reaction velocity. We successfully performed an advanced oxidation process (AOP) using air plasma. Hydrogen peroxide and ozone, which were used for the formation of OH radicals in our experiment, were generated by varying the amount of water vapor supplied to the plasma. By varying the content of the water included in the air, the main product was changed from air plasma. When we increased the water content in the air, hydrogen peroxide was produced, while ozone peroxide was produced when we decreased the water content in the air. By varying the amount of water vapor, we realized a 99.9% reduction in the amount of bacteria in the biofilm when we discharged humidified air only. This work was supported by JSPS KAKENHI Grant Number 25630104.

Tracking time-varying coefficient-functions

DEFF Research Database (Denmark)

Nielsen, Henrik Aalborg; Nielsen, Torben Skov; Joensen, Alfred K.

2000-01-01

is a combination of recursive least squares with exponential forgetting and local polynomial regression. It is argued, that it is appropriate to let the forgetting factor vary with the value of the external signal which is the argument of the coefficient functions. Some of the key properties of the modified method...... are studied by simulation...

Esmaklassiline Karlovy Vary / Jaanus Noormets

Index Scriptorium Estoniae

Noormets, Jaanus

2007-01-01

Ilmar Raagi mängufilm "Klass" võitis 42. Karlovy Vary rahvusvahelise filmifestivalil kaks auhinda - ametliku kõrvalvõistlusprogrammi "East of the West" eripreemia "Special mention" ja Euroopa väärtfilmikinode keti Europa Cinemas preemia. Ka Asko Kase lühifilmi "Zen läbi prügi linastumisest ning teistest auhinnasaajatest ning osalejatest

High performance homes

DEFF Research Database (Denmark)

Beim, Anne; Vibæk, Kasper Sánchez

2014-01-01

. Consideration of all these factors is a precondition for a truly integrated practice and as this chapter demonstrates, innovative project delivery methods founded on the manufacturing of prefabricated buildings contribute to the production of high performance homes that are cost effective to construct, energy...

Human health and performance considerations for near earth asteroids (NEA)

Science.gov (United States)

Steinberg, Susan; Kundrot, Craig; Charles, John

2013-11-01

Humans are considered as a system in the design of any deep space exploration mission. The addition of many potential near asteroid (NEA) destinations to the existing multiple mission architecture for Lunar and Mars missions increases the complexity of human health and performance issues that are anticipated for exploration of space. We suggest that risks to human health and performance be analyzed in terms of the 4 major parameters related to multiple mission architecture: destination, duration, distance and vehicle design. Geological properties of the NEA will influence design of exploration tasks related to sample handling and containment, and extravehicular activity (EVA) capabilities including suit ports and tools. A robotic precursor mission that collects basic information on NEA surface properties would reduce uncertainty about these aspects of the mission as well as aid in mission architecture and exploration task design. Key mission parameters are strongly impacted by duration and distance. The most critical of these is deep-space radiation exposure without even the temporary shielding of a nearby large planetary body. The current space radiation permissible exposure limits (PEL) limits mission duration to 3-10 months depending on age, gender and stage of the solar cycle. Duration also impacts mission architectures including countermeasures for bone, muscle, and cardiovascular atrophy during continuous weightlessness; and behavioral and psychological issues resulting from isolation and confinement. Distance affects communications and limits abort and return options for a NEA mission. These factors are anticipated to have important effects on crew function and autonomous operations, as well as influence medical capability, supplies and training requirements of the crew. The design of a habitat volume that can maintain the physical and psychological health of the crew and support mission operations with limited intervention from earth will require an

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

International Nuclear Information System (INIS)

Yang, Chih Wei; Cheng, Tsung Chieh; Lin, Chiuhsiang Joe

2011-01-01

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner

Anthropometric Considerations in the Modernized Main Control Room: Application to a Virtual Nuclear Power Plant Control Panel

Energy Technology Data Exchange (ETDEWEB)

Yang, Chih Wei; Cheng, Tsung Chieh [Institute of Nuclear Energy Research, Taoyuan (China); Lin, Chiuhsiang Joe [Chung-Yuan Christian University, Chung Li (China)

2011-08-15

This study investigates the anthropometric considerations in the main control room (MCR) application to a virtual nuclear power plant (NPP) control panel. Influences of working postures and physical demands on the operational performance are also discussed. Finally, the present research provides a case example to illustrate the influences of anthropometric considerations on the control panel design for MCR operators by applying virtual reality (VR) technology. The MCR design primarily evolved in different countries. The datasets available is usually insufficient or inconsistent for the end users. To solve the upper mentioned problem, this study put emphasis on applying VR technology to anthropometric considerations support control panel design in the modernized MCR. Although the concept of applying VR technology on anthropometric considerations in this paper is related to the MCR in NPPs, it could be easily applied for the purposes of any type of control room in a similar manner.

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings.

Science.gov (United States)

Shangguan, Haolong; Kang, Jinwu; Yi, Jihao; Zhang, Xiaochuan; Wang, Xiang; Wang, Haibin; Huang, Tao

2018-03-30

3D printing technologies have been used gradually for the fabrication of sand molds and cores for castings, even though these molds and cores are dense structures. In this paper, a generation method for lattice-reinforced thickness-varying shell molds is proposed and presented. The first step is the discretization of the STL (Stereo Lithography) model of a casting into finite difference meshes. After this, a shell is formed by surrounding the casting with varying thickness, which is roughly proportional to the surface temperature distribution of the casting that is acquired by virtually cooling it in the environment. A regular lattice is subsequently constructed to support the shell. The outside surface of the shell and lattice in the cubic mesh format is then converted to STL format to serve as the external surface of the new shell mold. The internal surface of the new mold is the casting's surface with the normals of all of the triangles in STL format reversed. Experimental verification was performed on an Al alloy wheel hub casting. Its lattice-reinforced thickness-varying shell mold was generated by the proposed method and fabricated by the binder jetting 3D printing. The poured wheel hub casting was sound and of good surface smoothness. The cooling rate of the wheel hub casting was greatly increased due to the shell mold structure. This lattice-reinforced thickness-varying shell mold generation method is of great significance for mold design for castings to achieve cooling control.

Analysis of time-varying psoriasis lesion image patterns

DEFF Research Database (Denmark)

Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær; Nielsen, Allan Aasbjerg

2004-01-01

The multivariate alteration detection transform is applied to pairs of within and between time varying registered psoriasis image patterns. Color band contribution to the variates explaining maximal change is analyzed.......The multivariate alteration detection transform is applied to pairs of within and between time varying registered psoriasis image patterns. Color band contribution to the variates explaining maximal change is analyzed....

Specimen loading list for the varying temperature experiment

International Nuclear Information System (INIS)

Qualls, A.L.; Sitterson, R.G.

1998-01-01

The varying temperature experiment HFIR-RB-13J has been assembled and inserted in the reactor. Approximately 5300 specimens were cleaned, inspected, matched, and loaded into four specimen holders. A listing of each specimen loaded into the steady temperature holder, its position in the capsule, and the identification of the corresponding specimen loaded into the varying temperature holder is presented in this report

Robust Stability of Scaled-Four-Channel Teleoperation with Internet Time-Varying Delays

Directory of Open Access Journals (Sweden)

Emma Delgado

2016-04-01

Full Text Available We describe the application of a generic stability framework for a teleoperation system under time-varying delay conditions, as addressed in a previous work, to a scaled-four-channel (γ-4C control scheme. Described is how varying delays are dealt with by means of dynamic encapsulation, giving rise to mu-test conditions for robust stability and offering an appealing frequency technique to deal with the stability robustness of the architecture. We discuss ideal transparency problems and we adapt classical solutions so that controllers are proper, without single or double differentiators, and thus avoid the negative effects of noise. The control scheme was fine-tuned and tested for complete stability to zero of the whole state, while seeking a practical solution to the trade-off between stability and transparency in the Internet-based teleoperation. These ideas were tested on an Internet-based application with two Omni devices at remote laboratory locations via simulations and real remote experiments that achieved robust stability, while performing well in terms of position synchronization and force transparency.

Robust Stability of Scaled-Four-Channel Teleoperation with Internet Time-Varying Delays.

Science.gov (United States)

Delgado, Emma; Barreiro, Antonio; Falcón, Pablo; Díaz-Cacho, Miguel

2016-04-26

We describe the application of a generic stability framework for a teleoperation system under time-varying delay conditions, as addressed in a previous work, to a scaled-four-channel (γ-4C) control scheme. Described is how varying delays are dealt with by means of dynamic encapsulation, giving rise to mu-test conditions for robust stability and offering an appealing frequency technique to deal with the stability robustness of the architecture. We discuss ideal transparency problems and we adapt classical solutions so that controllers are proper, without single or double differentiators, and thus avoid the negative effects of noise. The control scheme was fine-tuned and tested for complete stability to zero of the whole state, while seeking a practical solution to the trade-off between stability and transparency in the Internet-based teleoperation. These ideas were tested on an Internet-based application with two Omni devices at remote laboratory locations via simulations and real remote experiments that achieved robust stability, while performing well in terms of position synchronization and force transparency.

What information is provided in transcripts and Medical Student Performance Records from Canadian Medical Schools? A retrospective cohort study.

Science.gov (United States)

Robins, Jason A; McInnes, Matthew D F; Esmail, Kaisra

2014-01-01

Resident selection committees must rely on information provided by medical schools in order to evaluate candidates. However, this information varies between institutions, limiting its value in comparing individuals and fairly assessing their quality. This study investigates what is included in candidates' documentation, the heterogeneity therein, as well as its objective data. Samples of recent transcripts and Medical Student Performance Records were anonymised prior to evaluation. Data were then extracted by two independent reviewers blinded to the submitting university, assessing for the presence of pre-selected criteria; disagreement was resolved through consensus. The data were subsequently analysed in multiple subgroups. Inter-rater agreement equalled 92%. Inclusion of important criteria varied by school, ranging from 22.2% inclusion to 70.4%; the mean equalled 47.4%. The frequency of specific criteria was highly variable as well. Only 17.7% of schools provided any basis for comparison of academic performance; the majority detailed only status regarding pass or fail, without any further qualification. Considerable heterogeneity exists in the information provided in official medical school documentation, as well as markedly little objective data. Standardization may be necessary in order to facilitate fair comparison of graduates from different institutions. Implementation of objective data may allow more effective intra- and inter-scholastic comparison.

What information is provided in transcripts and Medical Student Performance Records from Canadian Medical Schools? A retrospective cohort study

Directory of Open Access Journals (Sweden)

Jason A. Robins

2014-09-01

Full Text Available Background: Resident selection committees must rely on information provided by medical schools in order to evaluate candidates. However, this information varies between institutions, limiting its value in comparing individuals and fairly assessing their quality. This study investigates what is included in candidates’ documentation, the heterogeneity therein, as well as its objective data. Methods: Samples of recent transcripts and Medical Student Performance Records were anonymised prior to evaluation. Data were then extracted by two independent reviewers blinded to the submitting university, assessing for the presence of pre-selected criteria; disagreement was resolved through consensus. The data were subsequently analysed in multiple subgroups. Results: Inter-rater agreement equalled 92%. Inclusion of important criteria varied by school, ranging from 22.2% inclusion to 70.4%; the mean equalled 47.4%. The frequency of specific criteria was highly variable as well. Only 17.7% of schools provided any basis for comparison of academic performance; the majority detailed only status regarding pass or fail, without any further qualification. Conclusions: Considerable heterogeneity exists in the information provided in official medical school documentation, as well as markedly little objective data. Standardization may be necessary in order to facilitate fair comparison of graduates from different institutions. Implementation of objective data may allow more effective intra- and inter-scholastic comparison.

Varied line-space gratings and applications

International Nuclear Information System (INIS)

McKinney, W.R.

1991-01-01

This paper presents a straightforward analytical and numerical method for the design of a specific type of varied line-space grating system. The mathematical development will assume plane or nearly-plane spherical gratings which are illuminated by convergent light, which covers many interesting cases for synchrotron radiation. The gratings discussed will have straight grooves whose spacing varies across the principal plane of the grating. Focal relationships and formulae for the optical grating-pole-to-exist-slit distance and grating radius previously presented by other authors will be derived with a symbolic algebra system. It is intended to provide the optical designer with the tools necessary to design such a system properly. Finally, some possible advantages and disadvantages for application to synchrotron to synchrotron radiation beamlines will be discussed

Time-varying span efficiency through the wingbeat of desert locusts.

Science.gov (United States)

Henningsson, Per; Bomphrey, Richard J

2012-06-07

The flight performance of animals depends greatly on the efficacy with which they generate aerodynamic forces. Accordingly, maximum range, load-lifting capacity and peak accelerations during manoeuvres are all constrained by the efficiency of momentum transfer to the wake. Here, we use high-speed particle image velocimetry (1 kHz) to record flow velocities in the near wake of desert locusts (Schistocerca gregaria, Forskål). We use the measured flow fields to calculate time-varying span efficiency throughout the wing stroke cycle. The locusts are found to operate at a maximum span efficiency of 79 per cent, typically at a plateau of about 60 per cent for the majority of the downstroke, but at lower values during the upstroke. Moreover, the calculated span efficiencies are highest when the largest lift forces are being generated (90% of the total lift is generated during the plateau of span efficiency) suggesting that the combination of wing kinematics and morphology in locust flight perform most efficiently when doing the most work.

Evaluation of Smartphone Inertial Sensor Performance for Cross-Platform Mobile Applications

Science.gov (United States)

Kos, Anton; Tomažič, Sašo; Umek, Anton

2016-01-01

Smartphone sensors are being increasingly used in mobile applications. The performance of sensors varies considerably among different smartphone models and the development of a cross-platform mobile application might be a very complex and demanding task. A publicly accessible resource containing real-life-situation smartphone sensor parameters could be of great help for cross-platform developers. To address this issue we have designed and implemented a pilot participatory sensing application for measuring, gathering, and analyzing smartphone sensor parameters. We start with smartphone accelerometer and gyroscope bias and noise parameters. The application database presently includes sensor parameters of more than 60 different smartphone models of different platforms. It is a modest, but important start, offering information on several statistical parameters of the measured smartphone sensors and insights into their performance. The next step, a large-scale cloud-based version of the application, is already planned. The large database of smartphone sensor parameters may prove particularly useful for cross-platform developers. It may also be interesting for individual participants who would be able to check-up and compare their smartphone sensors against a large number of similar or identical models. PMID:27049391

Evaluation of Smartphone Inertial Sensor Performance for Cross-Platform Mobile Applications

Directory of Open Access Journals (Sweden)

Anton Kos

2016-04-01

Full Text Available Smartphone sensors are being increasingly used in mobile applications. The performance of sensors varies considerably among different smartphone models and the development of a cross-platform mobile application might be a very complex and demanding task. A publicly accessible resource containing real-life-situation smartphone sensor parameters could be of great help for cross-platform developers. To address this issue we have designed and implemented a pilot participatory sensing application for measuring, gathering, and analyzing smartphone sensor parameters. We start with smartphone accelerometer and gyroscope bias and noise parameters. The application database presently includes sensor parameters of more than 60 different smartphone models of different platforms. It is a modest, but important start, offering information on several statistical parameters of the measured smartphone sensors and insights into their performance. The next step, a large-scale cloud-based version of the application, is already planned. The large database of smartphone sensor parameters may prove particularly useful for cross-platform developers. It may also be interesting for individual participants who would be able to check-up and compare their smartphone sensors against a large number of similar or identical models.

Performance Standards for Windows | Efficient Windows Collaborative

Science.gov (United States)

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Neurocognitive functioning in parents of schizophrenia patients: Attentional and executive performance vary with genetic loading.

Science.gov (United States)

Schulze-Rauschenbach, Svenja; Lennertz, Leonhard; Ruhrmann, Stephan; Petrovsky, Nadine; Ettinger, Ulrich; Pukrop, Ralf; Dreher, Jan; Klosterkötter, Joachim; Maier, Wolfgang; Wagner, Michael

2015-12-30

Neuropsychological deficits are candidate endophenotypes of schizophrenia which can assist to explain the neurocognitive impact of genetic risk variants. The identification of endophenotypes is often based on the familiality of these phenotypes. Several studies demonstrate neuropsychological deficits in unaffected biological relatives of schizophrenia patients without differentiating between genetic and non-genetic factors underlying these deficits. We assessed N=129 unaffected biological parents of schizophrenia patients, N=28 schizophrenia patients (paranoid subtype), and N=143 controls without a family history of schizophrenia with an extensive neuropsychological test battery. Direct comparison of N=22 parents with an ancestral history of schizophrenia (more likely carriers, MLC) and N=17 of their spouses without such a history (less likely carriers, LLC) allowed the separation of genetic and non-genetic aspects in cognition. Overall, parents showed significant deficits in neuropsychological tasks from all cognitive domains with medium effect sizes. Direct comparisons of MLC- and LLC-parents showed that attentional and executive tasks were most strongly affected by genetic loading. To conclude, unaffected parents of schizophrenia patients showed modest yet significant impairments in attention, memory, and executive functioning. In particular, attentional and executive impairments varied most strongly with genetic loading for schizophrenia, prioritising these dysfunctions for genotype-endophenotype analyses. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Robust Performance of Systems with Structured Uncertainties in State Space

OpenAIRE

Zhou, K.; Khargonekar, P.P.; Stoustrup, Jakob; Niemann, H.H.

1995-01-01

This paper considers robust performance analysis and state feedback design for systems with time-varying parameter uncertainties. The notion of a strongly robust % performance criterion is introduced, and its applications in robust performance analysis and synthesis for nominally linear systems with time-varying uncertainties are discussed and compared with the constant scaled small gain criterion. It is shown that most robust performance analysis and synthesisproblems under this strongly rob...

Eesti film võistleb Karlovy Varys

Index Scriptorium Estoniae

2008-01-01

8. juulil esilinastub Karlovy Vary filmifestivalil Rene Vilbre noortefilm "Mina olin siin", mille aluseks on Sass Henno romaan "Mina olin siin. Esimene arest", stsenaariumi kirjutas Ilmar Raag. Film võistleb võistlusprogrammis "East of the West"

Re-identification of persons in multi-camera surveillance under varying viewpoints and illumination

Science.gov (United States)

Bouma, Henri; Borsboom, Sander; den Hollander, Richard J. M.; Landsmeer, Sander H.; Worring, Marcel

2012-06-01

The capability to track individuals in CCTV cameras is important for surveillance and forensics alike. However, it is laborious to do over multiple cameras. Therefore, an automated system is desirable. In literature several methods have been proposed, but their robustness against varying viewpoints and illumination is limited. Hence performance in realistic settings is also limited. In this paper, we present a novel method for the automatic re-identification of persons in video from surveillance cameras in a realistic setting. The method is computationally efficient, robust to a wide variety of viewpoints and illumination, simple to implement and it requires no training. We compare the performance of our method to several state-of-the-art methods on a publically available dataset that contains the variety of viewpoints and illumination to allow benchmarking. The results indicate that our method shows good performance and enables a human operator to track persons five times faster.

Performance Analysis in Elite Sports

NARCIS (Netherlands)

Talsma, Bertus Gatze

2013-01-01

The central theme of this dissertation concerns the development of techniques for analyzing and comparing performances of elite sportsmen. When performances are delivered under varying circumstances, or are influenced by other factors than the athletes' abilities, a fair comparison, for instance

Windows with improved energy performances

DEFF Research Database (Denmark)

Laustsen, Jacob Birck; Svendsen, Svend

2003-01-01

Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... has primary focused on the heat loss coefficient, U-value. However, as the U-value, especially for the glazing part, has improved considerably during the last years, the total solar energy transmittance, g-value, has become equally important to the total energy performance of windows. Improved energy...... resulted in a window with a positive net energy gain (in short the Net Gain Window), which means that it contributes to the space heating of the building. All improvements are based on existing technology and manufacturing methods. The results from this work show that the energy performances of windows can...

Psychosocial predictors in consideration of cosmetic surgery among women.

Science.gov (United States)

Nerini, Amanda; Matera, Camilla; Stefanile, Cristina

2014-04-01

This study aimed to analyze the influence of psychosocial factors on the consideration of cosmetic surgery. The authors hypothesized that the internalization of thin ideals and social comparisons mediate the relationship between media pressure, family and peer influence (appearance conversations, perception of teasing, and peer attributions), and the desire to pursue cosmetic surgery. The study participants were 429 Italian women (mean age, 33 years). They completed a questionnaire containing the Appearance Conversations With Friends Scale, the Perception of Teasing Scale for Friends, the Peer Attribution Scale, the "Pressure and Internalization-General" subscales of the Sociocultural Attitudes Towards Appearance Questionnaire-3, the Feedback on Physical Appearance Scale, the Physical Appearance Comparison Scale, and the "Consider" subscale of the Acceptance of Cosmetic Surgery Scale. Hierarchical linear regression was performed. The results indicated that media pressure and appearance conversations with peers predicted the outcome variable through the full mediation of internalization of thin ideals. The relation between peer attributions and interest in cosmetic surgery was partially mediated by internalization of thin ideals. Although social comparison was significantly related to both sociocultural variables and consideration of cosmetic procedures, it was not a significant mediator of this relationship. Neither family influence nor perception of teasing predicted the outcome variable. Overall, these results provide important information about the factors implicated in the consideration of cosmetic surgery by women. This research confirms that cosmetic surgeons need to adopt a base psychological approach. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Adaptive Particle Swarm Optimizer with Varying Acceleration Coefficients for Finding the Most Stable Conformer of Small Molecules.

Science.gov (United States)

Agrawal, Shikha; Silakari, Sanjay; Agrawal, Jitendra

2015-11-01

A novel parameter automation strategy for Particle Swarm Optimization called APSO (Adaptive PSO) is proposed. The algorithm is designed to efficiently control the local search and convergence to the global optimum solution. Parameters c1 controls the impact of the cognitive component on the particle trajectory and c2 controls the impact of the social component. Instead of fixing the value of c1 and c2 , this paper updates the value of these acceleration coefficients by considering time variation of evaluation function along with varying inertia weight factor in PSO. Here the maximum and minimum value of evaluation function is use to gradually decrease and increase the value of c1 and c2 respectively. Molecular energy minimization is one of the most challenging unsolved problems and it can be formulated as a global optimization problem. The aim of the present paper is to investigate the effect of newly developed APSO on the highly complex molecular potential energy function and to check the efficiency of the proposed algorithm to find the global minimum of the function under consideration. The proposed algorithm APSO is therefore applied in two cases: Firstly, for the minimization of a potential energy of small molecules with up to 100 degrees of freedom and finally for finding the global minimum energy conformation of 1,2,3-trichloro-1-flouro-propane molecule based on a realistic potential energy function. The computational results of all the cases show that the proposed method performs significantly better than the other algorithms. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entropy Rate of Time-Varying Wireless Networks

DEFF Research Database (Denmark)

Cika, Arta; Badiu, Mihai Alin; Coon, Justin P.

2018-01-01

In this paper, we present a detailed framework to analyze the evolution of the random topology of a time-varying wireless network via the information theoretic notion of entropy rate. We consider a propagation channel varying over time with random node positions in a closed space and Rayleigh...... fading affecting the connections between nodes. The existence of an edge between two nodes at given locations is modeled by a Markov chain, enabling memory effects in network dynamics. We then derive a lower and an upper bound on the entropy rate of the spatiotemporal network. The entropy rate measures...

Performances of different global positioning system devices for time-location tracking in air pollution epidemiological studies.

Science.gov (United States)

Wu, Jun; Jiang, Chengsheng; Liu, Zhen; Houston, Douglas; Jaimes, Guillermo; McConnell, Rob

2010-11-23

People's time-location patterns are important in air pollution exposure assessment because pollution levels may vary considerably by location. A growing number of studies are using global positioning systems (GPS) to track people's time-location patterns. Many portable GPS units that archive location are commercially available at a cost that makes their use feasible for epidemiological studies. We evaluated the performance of five portable GPS data loggers and two GPS cell phones by examining positional accuracy in typical locations (indoor, outdoor, in-vehicle) and factors that influence satellite reception (building material, building type), acquisition time (cold and warm start), battery life, and adequacy of memory for data storage. We examined stationary locations (eg, indoor, outdoor) and mobile environments (eg, walking, traveling by vehicle or bus) and compared GPS locations to highly-resolved US Geological Survey (USGS) and Digital Orthophoto Quarter Quadrangle (DOQQ) maps. The battery life of our tested instruments ranged from acquisition of location time after startup ranged from a few seconds to >20 minutes and varied significantly by building structure type and by cold or warm start. No GPS device was found to have consistently superior performance with regard to spatial accuracy and signal loss. At fixed outdoor locations, 65%-95% of GPS points fell within 20-m of the corresponding DOQQ locations for all the devices. At fixed indoor locations, 50%-80% of GPS points fell within 20-m of the corresponding DOQQ locations for all the devices except one. Most of the GPS devices performed well during commuting on a freeway, with >80% of points within 10-m of the DOQQ route, but the performance was significantly impacted by surrounding structures on surface streets in highly urbanized areas. All the tested GPS devices had limitations, but we identified several devices which showed promising performance for tracking subjects' time location patterns in

Conflicting and complementary ethics of animal welfare considerations in reintroductions.

Science.gov (United States)

Harrington, Lauren A; Moehrenschlager, Axel; Gelling, Merryl; Atkinson, Rob P D; Hughes, Joelene; Macdonald, David W

2013-06-01

Despite differences in focus, goals, and strategies between conservation biology and animal welfare, both are inextricably linked in many ways, and greater consideration of animal welfare, although important in its own right, also has considerable potential to contribute to conservation success. Nevertheless, animal welfare and animal ethics are not always considered explicitly within conservation practice. We systematically reviewed the recent scientific peer-reviewed and online gray literature on reintroductions of captive-bred and wild-caught animals (mammals, birds, amphibians, and reptiles) to quantify the occurrence of animal welfare issues. We considered monitoring that could be indicative of the animal's welfare status and supportive management actions that could improve animal welfare (regardless of whether the aim was explicitly animal-welfare orientated). Potential welfare issues (of variable nature and extent) were recorded in 67% of 199 projects reviewed; the most common were mortality >50%, dispersal or loss of animals, disease, and human conflict. Most (>70%) projects monitored survival, 18% assessed body condition, and 2% monitored stress levels. Animal welfare, explicitly, was referred to in 6% of projects. Supportive actions, most commonly use of on-site prerelease pens and provision of supplemental food or water, were implemented in 79% of projects, although the extent and duration of support varied. Practitioners can address animal-welfare issues in reintroductions by considering the potential implications for individual animals at all stages of the release process using the decision tree presented. We urge practitioners to report potential animal-welfare issues, describe mitigation actions, and evaluate their efficacy to facilitate transparent evaluation of common moral dilemmas and to advance communal strategies for dealing with them. Currently, comparative mortality rates, health risks, postrelease stress, effectiveness of supportive measures

Performance data for a terrestrial solar photovoltaic/water electrolysis experiment

Science.gov (United States)

Costogue, E. N.; Yasui, R. K.

1977-01-01

A description is presented of the equipment used in the experiment, taking into account the surplus solar panel from the Mariner 4 spacecraft which was used as a solar array source and an electrolytic hydrogen generator. Attention is also given to operational considerations and performance data, system considerations and aspects of optimization, and large-scale hydrogen production considerations.

Interventions to Address Parenting and Parental Substance Abuse: Conceptual and Methodological Considerations

Science.gov (United States)

Neger, Emily N.; Prinz, Ronald J.

2015-01-01

Parental substance abuse is a serious problem affecting the well-being of children and families. The co-occurrence of parental substance abuse and problematic parenting is recognized as a major public health concern. This review focuses on 21 outcome studies that tested dual treatment of substance abuse and parenting. A summary of theoretical conceptualizations of the connections between substance abuse and parenting provides a backdrop for the review. Outcomes of the dual treatment studies were generally positive with respect to reduction of parental substance use and improvement of parenting. Research in this area varied in methodological rigor and needs to overcome challenges regarding design issues, sampling frame, and complexities inherent in such a high-risk population. This area of work can be strengthened by randomized controlled trials, use of mixed-methods outcome measures, consideration of parent involvement with child protective services, involvement of significant others in treatment, provision of concrete supports for treatment attendance and facilitative public policies. PMID:25939033

Interventions to address parenting and parental substance abuse: conceptual and methodological considerations.

Science.gov (United States)

Neger, Emily N; Prinz, Ronald J

2015-07-01

Parental substance abuse is a serious problem affecting the well-being of children and families. The co-occurrence of parental substance abuse and problematic parenting is recognized as a major public health concern. This review focuses on 21 outcome studies that tested dual treatment of substance abuse and parenting. A summary of theoretical conceptualizations of the connections between substance abuse and parenting provides a backdrop for the review. Outcomes of the dual treatment studies were generally positive with respect to reduction of parental substance use and improvement of parenting. Research in this area varied in methodological rigor and needs to overcome challenges regarding design issues, sampling frame, and complexities inherent in such a high-risk population. This area of work can be strengthened by randomized controlled trials, use of mixed-methods outcome measures, consideration of parent involvement with child protective services, involvement of significant others in treatment, provision of concrete supports for treatment attendance and facilitative public policies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Helium compressor aerodynamic design considerations for MHTGR circulators

International Nuclear Information System (INIS)

McDonald, C.F.

1988-01-01

Compressor aerodynamic design considerations for both the main and shutdown cooling circulators in the Modular High-Temperature Gas-Cooled Reactor (MHTGR) plant are addressed in this paper. A major selection topic relates to the impeller type (i.e., axial or radial flow), and the aerothermal studies leading to the selection of optimum parameters are discussed. For the conceptual designs of the main and shutdown cooling circulators, compressor blading geometries were established and helium gas flow paths defined. Both circulators are conservative by industrial standards in terms of aerodynamic and structural loading, and the blade tip speeds are particularly modest. Performance characteristics are presented, and the designs embody margin to ensure that pressure-rise growth potential can be accomodated should the circuit resistance possibly increase as the plant design advances. The axial flow impeller for the main circulator is very similar to the Fort St. Vrain (FSV) helium compressor which performs well. A significant technology base exists for the MHTGR plant circulators, and this is highlighted in the paper. (author). 15 refs, 16 figs, 12 tabs

In-Sample Confidence Bands and Out-of-Sample Forecast Bands for Time-Varying Parameters in Observation Driven Models

NARCIS (Netherlands)

Blasques, F.; Koopman, S.J.; Lasak, K.A.; Lucas, A.

2016-01-01

We study the performances of alternative methods for calculating in-sample confidence and out-of-sample forecast bands for time-varying parameters. The in-sample bands reflect parameter uncertainty, while the out-of-sample bands reflect not only parameter uncertainty, but also innovation

Site identification: environmental and radiological considerations

International Nuclear Information System (INIS)

Waite, D.A.

1980-01-01

Radiological and environmental considerations are recognized as being of utmost importance in planning, siting, licensing, operating, and decommissioning a high-level nuclear waste repository. In such a complex undertaking, it is important to identify the major concerns anticipated to arise in all of these phases in order to address them as early as possible in the program. Three representative activities/studies are summarized which will identify some of the important radiological and environmental considerations which must be addressed through this prolonged sequence of events and will indicate how these considerations are being addressed. It should be emphasized that these are only three of many which could have been chosen. The three key activities/studies are: (1) the NWTS Program criteria for identifying repository sites, (2) the generic guide for preparing environmental evaluations for deep drilling and (3) a preliminary environmental assessment for disposal of mined rock during excavation of a repository

49 CFR 604.21 - Special considerations for advisory opinions.

Science.gov (United States)

2010-10-01

... Desist Orders § 604.21 Special considerations for advisory opinions. Based on new facts involving significant financial considerations, the Chief Counsel may take appropriate enforcement action contrary to an... 49 Transportation 7 2010-10-01 2010-10-01 false Special considerations for advisory opinions. 604...

Making Performance Assessments a Part of Accountability

Science.gov (United States)

Haun, Billy

2018-01-01

The purpose of this commentary is to describe recent efforts in Virginia to develop and use performance assessments, including the challenges that emerged during this process and key considerations for states that integrate performance assessment into their systems. Performance assessments can play an important role in preparing students for…

LiDAR based prediction of forest biomass using hierarchical models with spatially varying coefficients

Science.gov (United States)

Babcock, Chad; Finley, Andrew O.; Bradford, John B.; Kolka, Randall K.; Birdsey, Richard A.; Ryan, Michael G.

2015-01-01

Many studies and production inventory systems have shown the utility of coupling covariates derived from Light Detection and Ranging (LiDAR) data with forest variables measured on georeferenced inventory plots through regression models. The objective of this study was to propose and assess the use of a Bayesian hierarchical modeling framework that accommodates both residual spatial dependence and non-stationarity of model covariates through the introduction of spatial random effects. We explored this objective using four forest inventory datasets that are part of the North American Carbon Program, each comprising point-referenced measures of above-ground forest biomass and discrete LiDAR. For each dataset, we considered at least five regression model specifications of varying complexity. Models were assessed based on goodness of fit criteria and predictive performance using a 10-fold cross-validation procedure. Results showed that the addition of spatial random effects to the regression model intercept improved fit and predictive performance in the presence of substantial residual spatial dependence. Additionally, in some cases, allowing either some or all regression slope parameters to vary spatially, via the addition of spatial random effects, further improved model fit and predictive performance. In other instances, models showed improved fit but decreased predictive performance—indicating over-fitting and underscoring the need for cross-validation to assess predictive ability. The proposed Bayesian modeling framework provided access to pixel-level posterior predictive distributions that were useful for uncertainty mapping, diagnosing spatial extrapolation issues, revealing missing model covariates, and discovering locally significant parameters.

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings

Science.gov (United States)

Shangguan, Haolong; Kang, Jinwu; Yi, Jihao; Zhang, Xiaochuan; Wang, Xiang; Wang, Haibin; Huang, Tao

2018-01-01

3D printing technologies have been used gradually for the fabrication of sand molds and cores for castings, even though these molds and cores are dense structures. In this paper, a generation method for lattice-reinforced thickness-varying shell molds is proposed and presented. The first step is the discretization of the STL (Stereo Lithography) model of a casting into finite difference meshes. After this, a shell is formed by surrounding the casting with varying thickness, which is roughly proportional to the surface temperature distribution of the casting that is acquired by virtually cooling it in the environment. A regular lattice is subsequently constructed to support the shell. The outside surface of the shell and lattice in the cubic mesh format is then converted to STL format to serve as the external surface of the new shell mold. The internal surface of the new mold is the casting’s surface with the normals of all of the triangles in STL format reversed. Experimental verification was performed on an Al alloy wheel hub casting. Its lattice-reinforced thickness-varying shell mold was generated by the proposed method and fabricated by the binder jetting 3D printing. The poured wheel hub casting was sound and of good surface smoothness. The cooling rate of the wheel hub casting was greatly increased due to the shell mold structure. This lattice-reinforced thickness-varying shell mold generation method is of great significance for mold design for castings to achieve cooling control. PMID:29601543

The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings

Directory of Open Access Journals (Sweden)

Haolong Shangguan

2018-03-01

Full Text Available 3D printing technologies have been used gradually for the fabrication of sand molds and cores for castings, even though these molds and cores are dense structures. In this paper, a generation method for lattice-reinforced thickness-varying shell molds is proposed and presented. The first step is the discretization of the STL (Stereo Lithography model of a casting into finite difference meshes. After this, a shell is formed by surrounding the casting with varying thickness, which is roughly proportional to the surface temperature distribution of the casting that is acquired by virtually cooling it in the environment. A regular lattice is subsequently constructed to support the shell. The outside surface of the shell and lattice in the cubic mesh format is then converted to STL format to serve as the external surface of the new shell mold. The internal surface of the new mold is the casting’s surface with the normals of all of the triangles in STL format reversed. Experimental verification was performed on an Al alloy wheel hub casting. Its lattice-reinforced thickness-varying shell mold was generated by the proposed method and fabricated by the binder jetting 3D printing. The poured wheel hub casting was sound and of good surface smoothness. The cooling rate of the wheel hub casting was greatly increased due to the shell mold structure. This lattice-reinforced thickness-varying shell mold generation method is of great significance for mold design for castings to achieve cooling control.

Genetic polymorphisms in varied environments.

Science.gov (United States)

Powell, J R

1971-12-03

Thirteen experimenital populationis of Drosophila willistoni were maintained in cages, in some of which the environments were relatively constant and in others varied. After 45 weeks, the populations were assayed by gel electrophoresis for polymorphisms at 22 protein loci. The average heterozygosity per individual and the average unmber of alleles per locus were higher in populations maintained in heterogeneous environments than in populations in more constant enviroments.

Pemodelan Markov Switching Dengan Time-varying Transition Probability

OpenAIRE

Savitri, Anggita Puri; Warsito, Budi; Rahmawati, Rita

2016-01-01

Exchange rate or currency is an economic variable which reflects country's state of economy. It fluctuates over time because of its ability to switch the condition or regime caused by economic and political factors. The changes in the exchange rate are depreciation and appreciation. Therefore, it could be modeled using Markov Switching with Time-Varying Transition Probability which observe the conditional changes and use information variable. From this model, time-varying transition probabili...

78 FR 29117 - After Final Consideration Pilot Program 2.0

Science.gov (United States)

2013-05-17

...] After Final Consideration Pilot Program 2.0 AGENCY: United States Patent and Trademark Office, Commerce... Final Consideration Pilot Program (AFCP) to create the After Final Consideration Pilot Program 2.0 (AFCP....0 to consider the response. If the examiner's consideration of a proper AFCP 2.0 request and...

Optimal routing of hazardous substances in time-varying, stochastic transportation networks

International Nuclear Information System (INIS)

Woods, A.L.; Miller-Hooks, E.; Mahmassani, H.S.

1998-07-01

This report is concerned with the selection of routes in a network along which to transport hazardous substances, taking into consideration several key factors pertaining to the cost of transport and the risk of population exposure in the event of an accident. Furthermore, the fact that travel time and the risk measures are not constant over time is explicitly recognized in the routing decisions. Existing approaches typically assume static conditions, possibly resulting in inefficient route selection and unnecessary risk exposure. The report described the application of recent advances in network analysis methodologies to the problem of routing hazardous substances. Several specific problem formulations are presented, reflecting different degrees of risk aversion on the part of the decision-maker, as well as different possible operational scenarios. All procedures explicitly consider travel times and travel costs (including risk measures) to be stochastic time-varying quantities. The procedures include both exact algorithms, which may require extensive computational effort in some situations, as well as more efficient heuristics that may not guarantee a Pareto-optimal solution. All procedures are systematically illustrated for an example application using the Texas highway network, for both normal and incident condition scenarios. The application illustrates the trade-offs between the information obtained in the solution and computational efficiency, and highlights the benefits of incorporating these procedures in a decision-support system for hazardous substance shipment routing decisions

Observer-based linear parameter varying H∞ tracking control for hypersonic vehicles

Directory of Open Access Journals (Sweden)

Yiqing Huang

2016-11-01

Full Text Available This article aims to develop observer-based linear parameter varying output feedback H∞ tracking controller for hypersonic vehicles. Due to the complexity of an original nonlinear model of the hypersonic vehicle dynamics, a slow–fast loop linear parameter varying polytopic model is introduced for system stability analysis and controller design. Then, a state observer is developed by linear parameter varying technique in order to estimate the unmeasured attitude angular for slow loop system. Also, based on the designed linear parameter varying state observer, a kind of attitude tracking controller is presented to reduce tracking errors for all bounded reference attitude angular inputs. The closed-loop linear parameter varying system is proved to be quadratically stable by Lypapunov function technique. Finally, simulation results show that the developed linear parameter varying H∞ controller has good tracking capability for reference commands.

Estrelas variáveis

OpenAIRE

Viana, Sérgio Manuel de Oliveira

2001-01-01

A observação do céu nocturno é uma prática que vem da Antiguidade. Desde então e durante muito tempo pensou-se que as estrelas mantinham o brilho constante. Assim foi até ao século XVI, quando David Fabricius observou uma estrela cujo brilho variava periodicamente. Dois séculos mais tarde, Jonh Goodricke descobriu uma segunda estrela e com o desenvolvimento de instrumentos de observação este conjunto foi muito alargado e hoje inclui o Sol.A variação do brilho das estrelas variáveis permite d...

High-voltage, high-power architecture considerations

International Nuclear Information System (INIS)

Moser, R.L.

1985-01-01

Three basic EPS architectures, direct energy transfer, peak-power tracking, and a potential EPS architecture for a nuclear reactor are described and compared. Considerations for the power source and energy storage are discussed. Factors to be considered in selecting the operating voltage are pointed out. Other EPS architecture considerations are autonomy, solar array degrees of freedom, and EPS modularity. It was concluded that selection of the power source and energy storage has major impacts on the spacecraft architecture and mass

Robust Performance of Systems with Structured Uncertainties in State Space

DEFF Research Database (Denmark)

Zhou, Kemin; Khargonekar, Pramod P.; Stoustrup, Jakob

1995-01-01

This paper considers robust performance analysis and state feedback design for systems with time-varying parameter uncertainties. The notion of a strongly robust % performance criterion is introduced, and its applications in robust performance analysis and synthesis for nominally linear systems...... with time-varying uncertainties are discussed and compared with the constant scaled small gain criterion. It is shown that most robust performance analysis and synthesis problems under this strongly robust % performance criterion can be transformed into linear matrix inequality problems, and can be solved...

New Results on Passivity Analysis of Stochastic Neural Networks with Time-Varying Delay and Leakage Delay

Directory of Open Access Journals (Sweden)

YaJun Li

2015-01-01

Full Text Available The passivity problem for a class of stochastic neural networks systems (SNNs with varying delay and leakage delay has been further studied in this paper. By constructing a more effective Lyapunov functional, employing the free-weighting matrix approach, and combining with integral inequality technic and stochastic analysis theory, the delay-dependent conditions have been proposed such that SNNs are asymptotically stable with guaranteed performance. The time-varying delay is divided into several subintervals and two adjustable parameters are introduced; more information about time delay is utilised and less conservative results have been obtained. Examples are provided to illustrate the less conservatism of the proposed method and simulations are given to show the impact of leakage delay on stability of SNNs.

Consideration of Environmental Factors in Planning and Development of Urban Areas

Science.gov (United States)

Kustysheva, I.

2017-11-01

Environmental factors, in varying degrees, always have a direct influence on the urban environment formation and the provision of favorable and safe conditions for the life of the population. Their role in the planning and development of urban areas remains an integral part of the management of such areas. Management should be aimed at improving the efficiency of use of the territories and ecological environment improvement. Planning must be done with the consideration of identified ecological processes in cities on the basis of the information about their occurrence in the past and present. Currently, cities face a multitude of problems that require urgent and immediate solutions. One of the most important issues is the poor state of the urban environment, so the environmental factors remain one of the most critical problems that should be considered by the authorities while implementing the urban areas’ development plans. The article discusses the role of environmental factors in the management and planning of urban territories by the example of the city of Tobolsk.

20 CFR 405.373 - Requesting consideration of new evidence.

Science.gov (United States)

2010-04-01

... consideration of new evidence. (a) If the administrative law judge's decision is our final decision, the... consideration by the administrative law judge at the earliest possible opportunity, but no later than 30 days... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Requesting consideration of new evidence. 405...

Materials considerations for the National Spallation Neutron Source target

International Nuclear Information System (INIS)

Mansur, L.K.; DiStefano, J.R.; Farrell, K.; Lee, E.H.; Pawel, S.J.; Wechsler, M.S.

1997-08-01

The National Spallation Neutron Source (NSNS), in which neutrons are generated by bombarding a liquid mercury target with 1 GeV protons, will place extraordinary demands on materials performance. The target structural material will operate in an aggressive environment, subject to intense fluxes of high energy protons, neutrons, and other particles, while exposed to liquid mercury and to water. Components that require special consideration include the Hg liquid target container and protective shroud, beam windows, support structures, moderator containers, and beam tubes. In response to these demands a materials R and D program has been developed for the NSNS that includes: selection of materials; calculations of radiation damage; irradiations, post irradiation testing, and characterization; compatibility testing and characterization; design and implementation of a plan for monitoring of materials performance in service; and materials engineering and technical support to the project. Irradiations are being carried out in actual and simulated spallation environments. Compatibility experiments in Hg are underway to ascertain whether the phenomena of liquid metal embrittlement and temperature gradient mass transfer will be significant. Results available to date are assessed in terms of the design and operational performance of the facility

Vesicle biomechanics in a time-varying magnetic field.

Science.gov (United States)

Ye, Hui; Curcuru, Austen

2015-01-01

Cells exhibit distortion when exposed to a strong electric field, suggesting that the field imposes control over cellular biomechanics. Closed pure lipid bilayer membranes (vesicles) have been widely used for the experimental and theoretical studies of cellular biomechanics under this electrodeformation. An alternative method used to generate an electric field is by electromagnetic induction with a time-varying magnetic field. References reporting the magnetic control of cellular mechanics have recently emerged. However, theoretical analysis of the cellular mechanics under a time-varying magnetic field is inadequate. We developed an analytical theory to investigate the biomechanics of a modeled vesicle under a time-varying magnetic field. Following previous publications and to simplify the calculation, this model treated the inner and suspending media as lossy dielectrics, the membrane thickness set at zero, and the electric resistance of the membrane assumed to be negligible. This work provided the first analytical solutions for the surface charges, electric field, radial pressure, overall translational forces, and rotational torques introduced on a vesicle by the time-varying magnetic field. Frequency responses of these measures were analyzed, particularly the frequency used clinically by transcranial magnetic stimulation (TMS). The induced surface charges interacted with the electric field to produce a biomechanical impact upon the vesicle. The distribution of the induced surface charges depended on the orientation of the coil and field frequency. The densities of these charges were trivial at low frequency ranges, but significant at high frequency ranges. The direction of the radial force on the vesicle was dependent on the conductivity ratio between the vesicle and the medium. At relatively low frequencies (biomechanics under a time-varying magnetic field. Biological effects of clinical TMS are not likely to occur via alteration of the biomechanics of brain

Entrepreneurship: Some Considerations

Directory of Open Access Journals (Sweden)

V. Martinho

2016-02-01

Full Text Available In this work it is presented some considerations about entrepreneurship. Most of these questions are linked with Portuguese context. Portugal has some particularities, namely because the asymmetries between the littoral and the interior. This situation carried out some problems that complicate and prevent the appearance of new innovated business. In a situation of crisis like that we have today this context can become a really problem to solve some questions.

Fault Detection for Non-Gaussian Stochastic Systems with Time-Varying Delay

Directory of Open Access Journals (Sweden)

Tao Li

2013-01-01

Full Text Available Fault detection (FD for non-Gaussian stochastic systems with time-varying delay is studied. The available information for the addressed problem is the input and the measured output probability density functions (PDFs of the system. In this framework, firstly, by constructing an augmented Lyapunov functional, which involves some slack variables and a tuning parameter, a delay-dependent condition for the existence of FD observer is derived in terms of linear matrix inequality (LMI and the fault can be detected through a threshold. Secondly, in order to improve the detection sensitivity performance, the optimal algorithm is applied to minimize the threshold value. Finally, paper-making process example is given to demonstrate the applicability of the proposed approach.

Design-for-variety, postponement, and operational performance

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2015-01-01

Design for variety (DFV) practices such as product modularization, platform thinking and design for manufacturing/assembly have been suggested to yield considerable operational performance benefits. Some of these performance effects can be expected in all manufacturing settings, including the pos...

Performance of a Brazilian sample on the Portuguese translation of the BNI Screen for Higher Cerebral Functions.

Science.gov (United States)

Prigatano, George P; Souza, Lígia M N; Braga, Lucia W

2018-03-01

The Barrow Neurological Institute (BNI) Screen for Higher Cerebral Functions (BNIS) has been translated into several languages and found useful in evaluating multiple domains of cognitive and affective dysfunction, particularly in neuro-rehabilitation settings. Normative data from countries with high literacy rates have reported strikingly similar mean level of performance scores on this test, with age typically correlating higher with total score performance than education. In the present study, we obtain convenience sample normative data from a native Brazilian population on a Portuguese translation of the BNIS (i.e., BNIS-PT). The BNIS was translated into Portuguese by two native speaking Portuguese neuropsychologists who were also fluent in English. It was then administered to 201 normally functioning native Brazilian individuals who varied considerably in age and formal educational training. The mean BNIS total score was similar to what previous studies reported, but primarily in younger adults with at least 12 years of formal education. In this Brazilian sample, the correlation of educational level and BNIS total score was r = .68, p < .001. The correlation of age and BNIS total score was r = -.36, p < .001. This is the opposite pattern to that observed in previous standardization studies. The strong correlation of education with performance in various subtests was observed in all age groups (ages ranging from 15 to 85 years). This standardization study provides guidelines for calculating expected average performance levels on the BNIS-PT for Brazilian individuals with varying degrees of age and education. Educational level positively correlated with test performance on the BNIS-PT and was repeatedly observed to overshadow the effects of age, suggesting its important role in the development of higher cerebral functions in multiple domains in a Brazilian sample of normally functioning individuals.

Operational considerations in drift emplacement of waste packages

International Nuclear Information System (INIS)

Benton, H.A.

1993-01-01

This paper discusses the operational considerations as well as the advantages and disadvantages of emplacing waste packages in drifts in a repository. The considerations apply particularly to the potential repository for spent nuclear fuel and high-level waste glass at Yucca Mountain, although most of the considerations and the advantages and disadvantages discussed in this paper do not necessarily represent the official views of the DOE or of the Management and Operations Contractor, since most of these considerations are still under active discussion and the final decisions will not be made for some time - perhaps years. This paper describes the issues, suggests some principles upon which decisions should be based, and states some of the most significant advantages and disadvantages of the emplacement modes, and the associated waste package types and thermal loadings

Time-Varying Value of Energy Efficiency in Michigan

Energy Technology Data Exchange (ETDEWEB)

Mims, Natalie; Eckman, Tom; Schwartz, Lisa C.

2018-04-02

Quantifying the time-varying value of energy efficiency is necessary to properly account for all of its benefits and costs and to identify and implement efficiency resources that contribute to a low-cost, reliable electric system. Historically, most quantification of the benefits of efficiency has focused largely on the economic value of annual energy reduction. Due to the lack of statistically representative metered end-use load shape data in Michigan (i.e., the hourly or seasonal timing of electricity savings), the ability to confidently characterize the time-varying value of energy efficiency savings in the state, especially for weather-sensitive measures such as central air conditioning, is limited. Still, electric utilities in Michigan can take advantage of opportunities to incorporate the time-varying value of efficiency into their planning. For example, end-use load research and hourly valuation of efficiency savings can be used for a variety of electricity planning functions, including load forecasting, demand-side management and evaluation, capacity planning, long-term resource planning, renewable energy integration, assessing potential grid modernization investments, establishing rates and pricing, and customer service (KEMA 2012). In addition, accurately calculating the time-varying value of efficiency may help energy efficiency program administrators prioritize existing offerings, set incentive or rebate levels that reflect the full value of efficiency, and design new programs.

A topological approach to migration and visualization of time-varying volume data

International Nuclear Information System (INIS)

Fujishiro, Issei; Otsuka, Rieko; Hamaoka, Aya; Takeshima, Yuriko; Takahashi, Shigeo

2004-01-01

Rapid advance in high performance computing and measurement technologies has recently made it possible to produce a stupendous amount of time-varying volume datasets in various disciplines. However, there exist a few known visual exploration tools which allow us to investigate the core of their complex behavior effectively. In this article, our previous approach to topological volume skeletonization is extended to capture the topological skeleton of a 4D volumetric field in terms of critical timing. A cyclic information drilldown scheme, termed T-map, is presented, where a wide choice of information visualization techniques are deployed so that the users are allowed to repeatedly squeeze partial spatiotemporal domains of interest until the size gets fitted into an available computing storage space, prior to topologically-accentuated visualization of the pinpointed volumetric domains. A case study with datasets from atomic collision research is performed to illustrate the feasibility of the present method. (author)