Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Modarres, M.; Wrethall, J.; Appignani, P.L.

1989-01-01

This paper describes the results of an evaluation of maintenance-related programmatic performance indicators, and summarizes the direction being taken in a new project to integrate indirect performance indicators for nuclear power plants. Programmatic indicators allow NRC to monitor, at a distance, trends in functional activities before a significant impact appears on safety. Previously presented work described the selection of candidate performance indicators associated with maintenance for continued analysis. This evaluation focused on two aspects of the selected indicators: (1) an evaluation of the state of maintenance programs in the narrative text of SALP reports versus the frequencies of inadvertent ESF actuations from test and maintenance errors; and (2) an evaluation of alternative methods for analyzing the thermal performance of plants as an integral indicator of maintenance program effectiveness. 1 ref., 1 fig

Operational safety performance indicator system at the Dukovany Nuclear Power Plant - Experience with indicator aggregation

International Nuclear Information System (INIS)

Mandula, J.

2001-01-01

The operational safety performance indicators serve as an important tool of performance monitoring and management at the Dukovany NPP. A software-supported system has been developed, which has included: data collection, central data storage, graphic output production and periodical report generation. Analyses of performance indicator trends together with evaluation in respect of annually updated target values and acceptance criteria are used for operational safety reviews forming an integral part of continual self-assessment process. This contribution has been focused on experience obtained during development of the operational safety assessment model using indicator aggregation. It summarises problems that had to be paid specific attention in the development process. Thanks to their solution, the model has become a synoptic monitor and a useful tool for operational safety assessment. (author)

Fast Flux Test Facility performance monitoring management information

International Nuclear Information System (INIS)

Newland, D.J.

1987-11-01

The purpose of this report is to provide performance data on key performance indicators selected from the FFTF Early Warning System performance indicators. This report contains the results for key performance indicators divided into two categories of ''overall'' and ''other''. The ''overall'' performance indicators, when considered in the aggregate, provide one means of monitoring overall plant performance

Research project implementation of a risk-based performance monitoring system for nuclear power plants: Phase II - Type-D indicators. Final report

Energy Technology Data Exchange (ETDEWEB)

Sewell, R.T. [EQE International. Inc., Evergreen, CO (United States); Khatib-Rahbar, M. [Energy Research, Inc., Rockville, MD (United States); Erikson, H. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden)

1999-02-01

This study has established the basis for incorporating a meaningful set of Type-D performance indicators into an overall performance monitoring system based on a PSA framework. The relationships developed as part of this study enable various organizational, maintenance, and operational influences, that are manifested through key events that can be identified and reported at a plant, to be accounted for in terms of their impacts on safety. The relationships and the capability they pose are significant new and unique developments. The relationships require that plant-specific data on the key performance indicators be acquired and analyzed. This, in turn, necessitates that a regular and systematic supplementary data collection program be implemented. Hence, it is recommended here that such a data program be developed and undertaken, specifically within the context of an overall PSA-based safety monitoring system. Plant licensees should be responsible for the supplemental data collection effort; however, the data collection requirements should not pose an undue burden on the licensees. To the extent possible, the data collection program should be coordinated, and possibly integrated, with existing licensee data collection and event reporting efforts. This study was undertaken to help verify whether or not it would be feasible to proceed with a PSA-based performance monitoring program. Research performed for Part-1 investigation has resulted in the development of a systematic and structured approach for monitoring safety performance based on all types of plant events. The Type-D relationships were earlier identified as a key element of the proposed performance monitoring system, and if it would be discovered that the Type-D relationships could not be practically developed and implemented, then it would have lead to the recognition that the performance monitoring system might have little practical value. On the other hand, if the Type-D relationships could be efficiently

Research project implementation of a risk-based performance monitoring system for nuclear power plants: Phase II - Type-D indicators. Final report

International Nuclear Information System (INIS)

Sewell, R.T.; Khatib-Rahbar, M.; Erikson, H.

1999-02-01

This study has established the basis for incorporating a meaningful set of Type-D performance indicators into an overall performance monitoring system based on a PSA framework. The relationships developed as part of this study enable various organizational, maintenance, and operational influences, that are manifested through key events that can be identified and reported at a plant, to be accounted for in terms of their impacts on safety. The relationships and the capability they pose are significant new and unique developments. The relationships require that plant-specific data on the key performance indicators be acquired and analyzed. This, in turn, necessitates that a regular and systematic supplementary data collection program be implemented. Hence, it is recommended here that such a data program be developed and undertaken, specifically within the context of an overall PSA-based safety monitoring system. Plant licensees should be responsible for the supplemental data collection effort; however, the data collection requirements should not pose an undue burden on the licensees. To the extent possible, the data collection program should be coordinated, and possibly integrated, with existing licensee data collection and event reporting efforts. This study was undertaken to help verify whether or not it would be feasible to proceed with a PSA-based performance monitoring program. Research performed for Part-1 investigation has resulted in the development of a systematic and structured approach for monitoring safety performance based on all types of plant events. The Type-D relationships were earlier identified as a key element of the proposed performance monitoring system, and if it would be discovered that the Type-D relationships could not be practically developed and implemented, then it would have lead to the recognition that the performance monitoring system might have little practical value. On the other hand, if the Type-D relationships could be efficiently

Data warehouse model for monitoring key performance indicators (KPIs) using goal oriented approach

Science.gov (United States)

Abdullah, Mohammed Thajeel; Ta'a, Azman; Bakar, Muhamad Shahbani Abu

2016-08-01

The growth and development of universities, just as other organizations, depend on their abilities to strategically plan and implement development blueprints which are in line with their vision and mission statements. The actualizations of these statements, which are often designed into goals and sub-goals and linked to their respective actors are better measured by defining key performance indicators (KPIs) of the university. The proposes ReGADaK, which is an extended the GRAnD approach highlights the facts, dimensions, attributes, measures and KPIs of the organization. The measures from the goal analysis of this unit serve as the basis of developing the related university's KPIs. The proposed data warehouse schema is evaluated through expert review, prototyping and usability evaluation. The findings from the evaluation processes suggest that the proposed data warehouse schema is suitable for monitoring the University's KPIs.

A Target-Lighted dsDNA-Indicator for High-Performance Monitoring of Mercury Pollution and Its Antagonists Screening.

Science.gov (United States)

Qing, Zhihe; Zhu, Lixuan; Li, Xiaoxuan; Yang, Sheng; Zou, Zhen; Guo, Jingru; Cao, Zhong; Yang, Ronghua

2017-10-17

As well-known, the excessive discharge of heavy-metal mercury not only destroys the ecological environment, bust also leads to severe damage of human health after ingestion via drinking and bioaccumulation of food chains, and mercury ion (Hg 2+ ) is designated as one of most prevalent toxic metal ions in drinking water. Thus, the high-performance monitoring of mercury pollution is necessary. Functional nucleic acids have been widely used as recognition probes in biochemical sensing. In this work, a carbazole derivative, ethyl-4-[3,6-bis(1-methyl-4-vinylpyridium iodine)-9H-carbazol -9-yl)] butanoate (EBCB), has been synthesized and found as a target-lighted DNA fluorescent indicator. As a proof-of-concept, Hg 2+ detection was carried out based on EBCB and Hg 2+ -mediated conformation transformation of a designed DNA probe. By comparison with conventional nucleic acid indicators, EBCB held excellent advantages, such as minimal background interference and maximal sensitivity. Outstanding detection capabilities were displayed, especially including simple operation (add-and-read manner), ultrarapidity (30 s), and low detection limit (0.82 nM). Furthermore, based on these advantages, the potential for high-performance screening of mercury antagonists was also demonstrated by the fluorescence change of EBCB. Therefore, we believe that this work is meaningful in pollution monitoring, environment restoration and emergency treatment, and may pave a way to apply EBCB as an ideal signal transducer for development of high-performance sensing strategies.

Neuropharmacology of performance monitoring.

Science.gov (United States)

Jocham, Gerhard; Ullsperger, Markus

2009-01-01

Adaptive, goal-directed behavior requires that organisms evaluate their actions in terms of their outcomes. Neuroimaging studies show that unfavorable outcomes or situations with high level of conflict engage the posterior medial frontal cortex (pMFC). Recording of event-related potentials revealed that these situations are accompanied by a negative deflection, the so-called error-related negativity (ERN), which appears after an erroneous response or after negative feedback. Both activation of the pMFC and the ERN are thought to represent a signal that indicates the need for behavioral adjustment, and to recruit other brain regions that implement these adjustments. While many fMRI and EEG studies have shed light on the anatomical structures and the cognitive processes involved in performance monitoring, only very recently have researchers begun to investigate the underlying neurochemical mechanisms. Drawing on the putative involvement of dopamine (DA) neurons in coding a reward prediction error, an influential theory has ascribed a pivotal role to DA in performance monitoring. However, although important, DA is certainly not the only neuromodulator involved. Recent studies point to a role for serotonin, norepinephrine and GABA, but also for adenosine in performance monitoring. Here, we review the evidence for neurotransmitter effects on this function in humans. In this light, we critically discuss currently debated models of performance monitoring and potential alternatives.

System of performance indicators for SMEs, metalworking sector

Directory of Open Access Journals (Sweden)

Cristina Viteri Sánchez

2014-03-01

Full Text Available (Received: 2013/03/05 - Accepted: 2013/03/25This paper focused on the design and proposal of management indicators for small and medium metalworking enterprises (SMEs in Quito. Metalworking number was established for the study. It was met and determined which areas deserve to be constantly monitored, by analyzing the performance of the companies, for this purpose, it was used a SWOT analysis, interviews and meetings with company managers , the results demanded the approach of a generic strategy, which included the formulation of the mission , vision and corporate values. Objectives and goals were established, they were classified according to the four perspectives of the Balanced Scorecard. Then it was possible to identify indicators to measure the proper functioning of the strategy proposed. 10 indicators of management were developed, according to the analysis of the reality of metalworking enterprises. So it was determined 3 financial indicators, 2 indicators focused on customers, 3 indicators for monitor internal business processes and 2 addressed the prospect of learning and growth. The use of these indicators is the key of performance and process control in each metalworking company.

An aggregated energy security performance indicator

International Nuclear Information System (INIS)

Martchamadol, Jutamanee; Kumar, S.

2013-01-01

Highlights: ► AESPI shows a country’s (or province’s) energy security status. ► AESPI considers social, economic and environmental aspects using 25 indicators. ► AESPI shows the impact of the trend of energy policies/measures. ► AESPI could be a tool for monitoring and evaluating the impact of energy policies. -- Abstract: An “Aggregated Energy Security Performance Indicator (AESPI)” has been developed by considering 25 individual indicators representing social, economy and environmental dimensions. The principle used, data required and the methodology for the development of AESPI have been detailed. AESPI requires time series data for its development and its value ranges from 0 to 10. The characteristics of AESPI have been compared with the existing indicators in terms of methodology, data requirements, analysis possible and the applications. The advantages of AESPI is that it not only assists in knowing the past energy security status of a country, but also helps in assessing the future status considering the energy policies and plans of the country, thus enabling the monitoring of the impacts of the policies.

Operational safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

2000-05-01

Since the late 1980s, the IAEA has been actively sponsoring work in the area of indicators to monitor nuclear power plant (NPP) operational safety performance. The early activities were mainly focused on exchanging ideas and good practices in the development and use of these indicators at nuclear power plants. Since 1995 efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator programme. The result of this work, compiled in this publication, is intended to assist NPPs in developing and implementing a monitoring programme, without overlooking the critical aspects related to operational safety performance. The framework proposed in this report was presented at two IAEA workshops on operational safety performance indicators held in Ljubljana, Slovenia, in September 1998 and at the Daya Bay NPP, Szenzhen, China, in December 1998. During these two workshops, the participants discussed and brainstormed on the indicator framework presented. These working sessions provided very useful insights and ideas which where used for the enhancement of the framework proposed. The IAEA is acknowledging the support and contribution of all the participants in these two activities. The programme development was enhanced by pilot plant studies. Four plants from different countries with different designs participated in this study with the objective of testing the applicability, usefulness and viability of this approach

Online monitoring of N-nitrosodimethylamine rejection as a performance indicator of trace organic chemical removal by reverse osmosis.

Science.gov (United States)

Fujioka, Takahiro; Takeuchi, Haruka; Tanaka, Hiroaki; Kodamatani, Hitoshi

2018-06-01

The security of recycled water quality in potable reuse can be enhanced by improving the credibility of reverse osmosis (RO) treatment for the removal of trace organic chemicals (TOrCs). This study evaluated the potential of online monitoring of N-nitrosodimethylamine (NDMA) before and after RO treatment as a surrogate indicator for TOrC removal by RO. This pilot-scale study monitored NDMA concentrations in RO feedwater (ultrafiltration-treated wastewater) and RO permeate every 22 min using novel online NDMA analyzers-high-performance liquid chromatography followed by photochemical reaction and chemiluminescence detection. NDMA rejection by RO varied considerably in response to changes in operating conditions (permeate flux and feedwater temperature). A high linear correlation between NDMA rejection and the rejection of six other TOrCs was observed. The linear correlation was also identified for an RO membrane damaged with chlorine. The correlation between another potential surrogate indicator (conductivity rejection) and TOrC rejection was relatively low. NDMA, which is the smallest compound among regulated TOrCs, revealed rejections lower than the other TOrCs, indicating that NDMA rejection can be a conservative surrogate indicator capable of predicting changes in TOrC removal. Copyright © 2018 Elsevier Ltd. All rights reserved.

Development of safety performance indicators for HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Ahn, Guk-Hoon; Lee, Kye-Hong; Lim, In-Cheol

2007-01-01

The nuclear facilities need an extensive basis for ensuring their safety. An operating organization should conduct its operation and utilization important to the safety in accordance with approved procedures and regulations. The general aims of a management system for nuclear facilities are to improve the safety performance through a planning, control and supervision of safety related activities and to foster a strong safety culture. The effectiveness of a management system can be monitored and measured to confirm the ability of its processes to achieve the intended safety performance by an assessment of the operational performance. The Operational Safety Performance Indicators, also known as SPI, help an organization define and measure a progress with regard to safety activity goals. The elements of a SPI are quantifiable measurements that reflect the critical success factors of an organizational safety. Since 1995, efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator program in nuclear power plants (NPP). IAEA-TECDOC-1141, 'Operational safety performance indicators for NPP' attempted to provide a frame work for an identification of performance indicators which have a relationship to the desired safety attributes, and therefore, to a safe plant operation. Three key attributes of a smooth operation, an operation with a low risk, and an operation with a positive safety attitude, were recommended, which are associated with a safe operation. Because these attributes cannot be directly measured, an indicator structure is expanded further until a level of easily quantifiable or directly measurable indicators is identified. The intention of this approach is to use quantitative information provided by the specific indicators and to analyze performance trends relative to established goals. The safety activities in HANARO have been continuously conducted to enhance its safe operation. HANARO

Performance indicators for first quarter CY 1994

International Nuclear Information System (INIS)

1994-01-01

The Department of Energy (DOE) has established a Department-Wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment safety, and health (ES ampersand H) performance of the DOE at the Secretary and other management levels. This is the thirteenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG ampersand G Idaho, Inc., to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The report format and content adhere to the guidelines established In DOE Order 5480.26, Trending and Analysis of Operations Information Using Performance Indicators, and DOE-STD-1048-92, DOE Peformance Indicators Guidance Document

Health Care Performance Indicators for Health Information Systems.

Science.gov (United States)

Hyppönen, Hannele; Ronchi, Elettra; Adler-Milstein, Julia

2016-01-01

Health Information Systems (HISs) are expected to have a positive impact on quality and efficiency of health care. Rapid investment in and diffusion of HISs has increased the importance of monitoring the adoption and impacts of them in order to learn from the initiatives, and to provide decision makers evidence on the role of HISs in improving health care. However, reliable and comparable data across initiatives in various countries are rarely available. A four-phase approach is used to compare different HIS indicator methodologies in order to move ahead in defining HIS indicators for monitoring effects of HIS on health care performance. Assessed approaches are strong on different aspects, which provide some opportunities for learning across them but also some challenges. As yet, all of the approaches do not define goals for monitoring formally. Most focus on health care structural and process indicators (HIS availability and intensity of use). However, many approaches are generic in description of HIS functionalities and context as well as their impact mechanisms on health care for HIS benchmarking. The conclusion is that, though structural and process indicators of HIS interventions are prerequisites for monitoring HIS impacts on health care outputs and outcomes, more explicit definition is needed of HIS contexts, goals, functionalities and their impact mechanisms in order to move towards common process and outcome indicators. A bottom-up-approach (participation of users) could improve development and use of context-sensitive HIS indicators.

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Reotemp Pressure Indicator - Local Pressure Indication to Monitor the SCHe Supply Bottle Pressure

International Nuclear Information System (INIS)

VAN KATWIJK, C.

1999-01-01

These 0-3000 psig range pressure indicators are located in the SCHe helium supply lines at the pressure bottles and upstream of the PRV. These accident monitoring local pressure indicators monitor the SCHe supply bottle pressure. There is one pressure indicator for each SCHe supply (4)

ISI PUBLICATIONS MANAGEMENT THROUGH PERFORMANCE INDICATORS

Directory of Open Access Journals (Sweden)

Victor VELTER

2010-09-01

Full Text Available The paper proposes to describe the ways in which the research management and administration department from a certain institution can interfere with specific policies in order to increase the visibility of scientific publications. Scientometric analysis is made on ISI publications of “Constantin Brancsi” University from Targu Jiu and wants to reveal performance indicators able to monitor the visibility of the papers indexed in ThomsonReuters ISI base.

Development of safety performance indicators of regulatory interest (SAFPER) in Pakistan

International Nuclear Information System (INIS)

Khatoon, Abida

2002-01-01

Safety performance indicators provide a very useful tool for monitoring operational safety of a nuclear power plant. Utilities in many countries have developed plant specific indicators for the assessment of their performance and safety. Regulators can make use of some of these indicators for their regulatory assessment. In addition to these regulatory bodies in some countries have also developed programs for the formulation of safety performance indicators which are used in monitoring operational safety and regulatory decision making. Realizing its usefulness Directorate of Nuclear Safety and Radiation Protection (DNSRP-the regulatory body in Pakistan) has also initiated a country specific program for the development of Safety Performance Indicators (SAFPER) based on data provided by the utility and that collected during the course of regulatory inspections. Selected areas of NPP operation to be monitored are: - Significant events; - Safety systems performance; - Barriers integrity; - Environment protection; - Workers radiation safety; and - Emergency Preparedness. One of the objectives of this program is also to monitor the effectiveness of DNSRP regulatory activities. IAEA framework is taken as one of the bases for our program. Safety performance will be assessed on the basis of Performance Indicators and inspection findings. DNSRP program as shown in Appendix includes the indicators in use and under development. It is felt that the term Safety Performance Indicators may be termed as 'SAFPER Indicators' to be used by the Regulators, as it is clear from this presentation that utility safety performance indicators together with the regulatory effectiveness indicators constitute the measure for the adequate safety to the public and the environment. Additional research is still necessary for: - indicator definition for the proposed and under developed indicators; - data collection systems; - thresholds; - trend analysis; - goal setting (benefit from the trend can be

Fast Flux Test Facility performance monitoring management information: [Final report

International Nuclear Information System (INIS)

Newland, D.J.

1987-09-01

The purpose of this report is to provide management with performance data on key performance indicators for the month of July, 1987. This report contains the results for key performance indicators divided into two categories of ''overall'' and ''other''. The ''overall'' performance indicators, when considered in the aggregate, provide one means of monitoring overall plant performance

Development of key performance indicators for prehospital emergency care.

Science.gov (United States)

Murphy, Adrian; Wakai, Abel; Walsh, Cathal; Cummins, Fergal; O'Sullivan, Ronan

2016-04-01

Key performance indicators (KPIs) are used to monitor and evaluate critical areas of clinical and support functions that influence patient outcome. Traditional prehospital emergency care performance monitoring has focused solely on response time metrics. The landscape of emergency care delivery in Ireland is in the process of significant national reconfiguration. The development of KPIs is therefore considered one of the key priorities in prehospital research. The aim of this study was to develop a suite of KPIs for prehospital emergency care in Ireland. A systematic literature review of prehospital care performance measurement was undertaken followed by a three-round Delphi consensus process facilitated by a broad-based multidisciplinary group of panellists. The consensus process was conducted between June 2012 and October 2013. Each candidate indicator on the Delphi survey questionnaire was rated using a 5-point Likert-type rating scale. Agreement was defined as at least 70% of responders rating an indicator as 'agree' or 'strongly agree' on the rating scale. Data were analysed using descriptive statistics. Sensitivity of the ratings was examined for robustness by bootstrapping the original sample. Of the 78 citations identified by the systematic review, 5 relevant publications were used to select candidate indicators for the Delphi round 1 questionnaire. Response rates in Delphi rounds 1 and 2 were 89% and 83%, respectively. Following the consensus development conference, 101 KPIs reached consensus. Based on the Donabedian framework for quality-of-care indicators, 7 of the KPIs which reached agreement were structure KPIs, 74 were process KPIs and 20 were outcome KPIs. The highest ranked indicator was a process KPI ('Direct transport of ST-elevation myocardial infarction patients to a primary percutaneous intervention (PCI)-capable facility for ECG to PCI time performance measurement using scientifically valid and reliable KPIs. Employing a Delphi panel of key

Proposed indicators for a monitoring programme. Summary

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The report presents proposals for a set of indicators to be used in a coordinated monitoring programme for the North Sea and Skagerrak ecosystems. This report suggests reference values and action thresholds for the indicators and suitable monitoring stations and survey transects, based on existing time series where possible. The relevance of the proposed indicators is also assessed to national and international environmental policy goals. The national targets of Norway's environmental policy and indicators used in the monitoring systems for the other Norwegian open sea areas were taken into account when drawing up the proposals. In the international context, The management plan was also assessed to the Convention on Biological Diversity, the International Council for the Exploration of the Sea (ICES), the Convention for the Protection of the Marine Environment of the North-East Atlantic (the OSPAR Convention) and the EU's Marine Strategy Framework Directive (MSFD).(Author)

Proposed indicators for a monitoring programme. Summary

International Nuclear Information System (INIS)

2012-01-01

The report presents proposals for a set of indicators to be used in a coordinated monitoring programme for the North Sea and Skagerrak ecosystems. This report suggests reference values and action thresholds for the indicators and suitable monitoring stations and survey transects, based on existing time series where possible. The relevance of the proposed indicators is also assessed to national and international environmental policy goals. The national targets of Norway's environmental policy and indicators used in the monitoring systems for the other Norwegian open sea areas were taken into account when drawing up the proposals. In the international context, The management plan was also assessed to the Convention on Biological Diversity, the International Council for the Exploration of the Sea (ICES), the Convention for the Protection of the Marine Environment of the North-East Atlantic (the OSPAR Convention) and the EU's Marine Strategy Framework Directive (MSFD).(Author)

Performance indicator system with application to NPP management

International Nuclear Information System (INIS)

Gomez, J.; Roldan, J.

2001-01-01

The objective of the paper is to present the work that is being conducted in the scope of a research project between Cofrentes NPP and the polytechnic university of Valencia aimed to the development and implementation of a performance indicators system to support plant management. In developing this system, attention is being paid to the areas of safety, production and dependability. The first step in the project was the development of the performance indicator system (PIS), in order to help in assessing the effectiveness of the different activities in plant (i.e. maintenance, inspections, tests, etc.). It is suggested establishing the operational indicators set in 3 levels. The lowest level concerns indicators monitoring performance and maintenance characteristics of components. The next one involves a subset of indicators placed at system level with a similar goal. And finally, the highest level summarizes the impact of the global policy in the whole plant from safety and performance point of view. The definition of an indicator should comprise, at least, the following items: indicator's name, performance area, definition and data needed. A strategy should define what, when and how indicators have to be evaluated, analyzed and reported. This article gives an example application of the methodology at the Cofrentes NPP, collective dose as safety indicator, power production as production indicator and the number of work orders as maintenance indicator are considered and their time evolution is given. (A.C.)

Indicator Species Population Monitoring in Antarctica with Uav

Science.gov (United States)

Zmarz, A.; Korczak-Abshire, M.; Storvold, R.; Rodzewicz, M.; Kędzierska, I.

2015-08-01

A program to monitor bird and pinniped species in the vicinity of Arctowski Station, King George Island, South Shetlands, Antarctica, has been conducted over the past 38 years. Annual monitoring of these indicator species includes estimations of breeding population sizes of three Pygoscelis penguin species: Adélie, gentoo and chinstrap. Six penguin colonies situated on the western shores of two bays: Admiralty and King George are investigated. To study changes in penguin populations Unmanned Aerial Vehicles were used for the first time in the 2014/15 austral summer season. During photogrammetric flights the high-resolution images of eight penguin breeding colonies were taken. Obtained high resolution images were used for estimation of breeding population size and compared with the results of measurements taken at the same time from the ground. During this Antarctic expedition eight successful photogrammetry missions (total distance 1500 km) were performed. Images were taken with digital SLR Canon 700D, Nikon D5300, Nikon D5100 with a 35mm objective lens. Flights altitude at 350 - 400 AGL, allowed images to be taken with a resolution GSD (ground sample distance) less than 5 cm. The Image J software analysis method was tested to provide automatic population estimates from obtained images. The use of UAV for monitoring of indicator species, enabled data acquisition from areas inaccessible by ground methods.

INDICATOR SPECIES POPULATION MONITORING IN ANTARCTICA WITH UAV

Directory of Open Access Journals (Sweden)

A. Zmarz

2015-08-01

Full Text Available A program to monitor bird and pinniped species in the vicinity of Arctowski Station, King George Island, South Shetlands, Antarctica, has been conducted over the past 38 years. Annual monitoring of these indicator species includes estimations of breeding population sizes of three Pygoscelis penguin species: Adélie, gentoo and chinstrap. Six penguin colonies situated on the western shores of two bays: Admiralty and King George are investigated. To study changes in penguin populations Unmanned Aerial Vehicles were used for the first time in the 2014/15 austral summer season. During photogrammetric flights the high-resolution images of eight penguin breeding colonies were taken. Obtained high resolution images were used for estimation of breeding population size and compared with the results of measurements taken at the same time from the ground. During this Antarctic expedition eight successful photogrammetry missions (total distance 1500 km were performed. Images were taken with digital SLR Canon 700D, Nikon D5300, Nikon D5100 with a 35mm objective lens. Flights altitude at 350 – 400 AGL, allowed images to be taken with a resolution GSD (ground sample distance less than 5 cm. The Image J software analysis method was tested to provide automatic population estimates from obtained images. The use of UAV for monitoring of indicator species, enabled data acquisition from areas inaccessible by ground methods.

Predicting the indicators of the safety performance monitoring after implementation of integrated management system (IMS in a combined cycle power plant in Yazd city

Directory of Open Access Journals (Sweden)

F. Laal

2015-07-01

.Conclusion: Findings show that Cubic regression can be an appropriate to olforinvestigating the indicators trends and for their predictionin planning and monitoring the performance ofsafety unitso that the decision-making for determining the priority of organizations’ safety programs would be facilitated.

Virtual Reality Simulation as a Tool to Monitor Surgical Performance Indicators: VIRESI Observational Study.

Science.gov (United States)

Muralha, Nuno; Oliveira, Manuel; Ferreira, Maria Amélia; Costa-Maia, José

2017-05-31

Virtual reality simulation is a topic of discussion as a complementary tool to traditional laparoscopic surgical training in the operating room. However, it is unclear whether virtual reality training can have an impact on the surgical performance of advanced laparoscopic procedures. Our objective was to assess the ability of the virtual reality simulator LAP Mentor to identify and quantify changes in surgical performance indicators, after LAP Mentor training for digestive anastomosis. Twelve surgeons from Centro Hospitalar de São João in Porto (Portugal) performed two sessions of advanced task 5: anastomosis in LAP Mentor, before and after completing the tutorial, and were evaluated on 34 surgical performance indicators. The results show that six surgical performance indicators significantly changed after LAP Mentor training. The surgeons performed the task significantly faster as the median 'total time' significantly reduced (p virtual reality training simulation as a benchmark tool to assess the surgical performance of Portuguese surgeons. LAP Mentor is able to identify variations in surgical performance indicators of digestive anastomosis.

Foraging traces as an indicator to monitor wild boar impact on ground nesting birds.

OpenAIRE

Roda , Fabrice; Roda , Jean-Marc

2016-01-01

The successful management of large herbivores requires the monitoring of a set of indicators of ecological change describing animal performance, relative animal abundance, and ungulate impact on habitat. Wild boar populations increases have been spectacular in many countries including France. Wild boars can have a substantial environmental impact on many ecosystem components including birds, but indicators to monitor such impact are currently lacking. In this paper, we examined the usefulness...

Performance Health Monitoring of Large-Scale Systems

Energy Technology Data Exchange (ETDEWEB)

Rajamony, Ram [IBM Research, Austin, TX (United States)

2014-11-20

This report details the progress made on the ASCR funded project Performance Health Monitoring for Large Scale Systems. A large-­scale application may not achieve its full performance potential due to degraded performance of even a single subsystem. Detecting performance faults, isolating them, and taking remedial action is critical for the scale of systems on the horizon. PHM aims to develop techniques and tools that can be used to identify and mitigate such performance problems. We accomplish this through two main aspects. The PHM framework encompasses diagnostics, system monitoring, fault isolation, and performance evaluation capabilities that indicates when a performance fault has been detected, either due to an anomaly present in the system itself or due to contention for shared resources between concurrently executing jobs. Software components called the PHM Control system then build upon the capabilities provided by the PHM framework to mitigate degradation caused by performance problems.

Quality Management and Key Performance Indicators in Oncologic Esophageal Surgery.

Science.gov (United States)

Gockel, Ines; Ahlbrand, Constantin Johannes; Arras, Michael; Schreiber, Elke Maria; Lang, Hauke

2015-12-01

Ranking systems and comparisons of quality and performance indicators will be of increasing relevance for complex "high-risk" procedures such as esophageal cancer surgery. The identification of evidence-based standards relevant for key performance indicators in esophageal surgery is essential for establishing monitoring systems and furthermore a requirement to enhance treatment quality. In the course of this review, we analyze the key performance indicators case volume, radicality of resection, and postoperative morbidity and mortality, leading to continuous quality improvement. Ranking systems established on this basis will gain increased relevance in highly complex procedures within the national and international comparison and furthermore improve the treatment of patients with esophageal carcinoma.

System and Method for Monitoring Piezoelectric Material Performance

Science.gov (United States)

Moses, Robert W. (Inventor); Fox, Christopher L. (Inventor); Fox, Melanie L. (Inventor); Chattin, Richard L. (Inventor); Shams, Qamar A. (Inventor); Fox, Robert L. (Inventor)

2007-01-01

A system and method are provided for monitoring performance capacity of a piezoelectric material that may form part of an actuator or sensor device. A switch is used to selectively electrically couple an inductor to the piezoelectric material to form an inductor-capacitor circuit. Resonance is induced in the inductor-capacitor circuit when the switch is operated to create the circuit. The resonance of the inductor-capacitor circuit is monitored with the frequency of the resonance being indicative of performance capacity of the device's piezoelectric material.

Using Templates and Linguistic Patterns to Define Process Performance Indicators

OpenAIRE

Río Ortega, Adela del; Resinas Arias de Reyna, Manuel; Durán Toro, Amador; Ruiz Cortés, Antonio

2014-01-01

Process performance management (PPM) aims at measuring, monitoring and analysing the performance of business processes (BPs), in order to check the achievement of strategic and operational goals and to support decision making for their optimisation. PPM is based on process performance indicators (PPIs), so having an appropriate definition of them is crucial. One of the main problems of PPIs definition is to express them in an unambiguous, complete, understandable, traceable ...

Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

Science.gov (United States)

Antolick, Lance J.; Branning, Jeremy S.; Wade, Daniel R.; Dempsey, Paula J.

2010-01-01

The U.S. Army is currently expanding its fleet of Health Usage Monitoring Systems (HUMS) equipped aircraft at significant rates, to now include over 1,000 rotorcraft. Two different on-board HUMS, the Honeywell Modern Signal Processing Unit (MSPU) and the Goodrich Integrated Vehicle Health Management System (IVHMS), are collecting vibration health data on aircraft that include the Apache, Blackhawk, Chinook, and Kiowa Warrior. The objective of this paper is to recommend the most effective gear condition indicators for fleet use based on both a theoretical foundation and field data. Gear diagnostics with better performance will be recommended based on both a theoretical foundation and results of in-fleet use. In order to evaluate the gear condition indicator performance on rotorcraft fleets, results of more than five years of health monitoring for gear faults in the entire HUMS equipped Army helicopter fleet will be presented. More than ten examples of gear faults indicated by the gear CI have been compiled and each reviewed for accuracy. False alarms indications will also be discussed. Performance data from test rigs and seeded fault tests will also be presented. The results of the fleet analysis will be discussed, and a performance metric assigned to each of the competing algorithms. Gear fault diagnostic algorithms that are compliant with ADS-79A will be recommended for future use and development. The performance of gear algorithms used in the commercial units and the effectiveness of the gear CI as a fault identifier will be assessed using the criteria outlined in the standards in ADS-79A-HDBK, an Army handbook that outlines the conversion from Reliability Centered Maintenance to the On-Condition status of Condition Based Maintenance.

Integrated Initiating Event Performance Indicators

International Nuclear Information System (INIS)

S. A. Eide; Dale M. Rasmuson; Corwin L. Atwood

2005-01-01

The U.S. Nuclear Regulatory Commission Industry Trends Program (ITP) collects and analyses industry-wide data, assesses the safety significance of results, and communicates results to Congress and other stakeholders. This paper outlines potential enhancements in the ITP to comprehensively cover the Initiating Events Cornerstone of Safety. Future work will address other cornerstones of safety. The proposed Tier 1 activity involves collecting data on ten categories of risk-significant initiating events, trending the results, and comparing early performance with prediction limits (allowable numbers of events, above which NRC action may occur). Tier 1 results would be used to monitor industry performance at the level of individual categories of initiating events. The proposed Tier 2 activity involves integrating the information for individual categories of initiating events into a single risk-based indicator, termed the Baseline Risk Index for Initiating Events or BRIIE. The BRIIE would be evaluated yearly and compared against a threshold. BRIIE results would be reported to Congress on a yearly basis

Proceedings of the specialist meeting on safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-28

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings.

Proceedings of the specialist meeting on safety performance indicators

International Nuclear Information System (INIS)

2002-01-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings

Peer groups and operational cycle enhancements to the performance indicator report

International Nuclear Information System (INIS)

Stromberg, H.M.; DeHaan, M.S.; Gentillon, C.D.; Wilson, G.E.; Vanden Heuvel, L.N.

1992-01-01

Accurate performance evaluation and plant trending by the performance indicator program are integral parts of monitoring the operation of commercial nuclear power plants. The presentations of the NRC/AEOD performance indicator program have undergone a number of enhancements. The diversity of the commercial nuclear plants, coupled with continued improvements in the performance indicator program, has resulted in the evaluation of plants in logical peer groups and highlighted the need to evaluate the impact of plant operational conditions on the performance indicators. These enhancements allow a more-meaningful evaluation of operating commercial nuclear power plant performance. This report proposes methods to enhance the presentation of the performance indicator data by analyzing the data in logical peer groups and displaying the performance indicator data based on the operational status of the plants. Previously, preliminary development of the operational cycle displays of the performance indicator data was documented. This report extends the earlier findings and presents the continued development of the peer groups and operational cycle trend and deviation data and displays. This report describes the peer groups and enhanced PI data presentations by considering the operational cycle phase breakdowns, calculation methods, and presentation methods

Validation of risk-based performance indicators: Safety system function trends

International Nuclear Information System (INIS)

Boccio, J.L.; Vesely, W.E.; Azarm, M.A.; Carbonaro, J.F.; Usher, J.L.; Oden, N.

1989-10-01

This report describes and applies a process for validating a model for a risk-based performance indicator. The purpose of the risk-based indicator evaluated, Safety System Function Trend (SSFT), is to monitor the unavailability of selected safety systems. Interim validation of this indicator is based on three aspects: a theoretical basis, an empirical basis relying on statistical correlations, and case studies employing 25 plant years of historical data collected from five plants for a number of safety systems. Results using the SSFT model are encouraging. Application of the model through case studies dealing with the performance of important safety systems shows that statistically significant trends in, and levels of, system performance can be discerned which thereby can provide leading indications of degrading and/or improving performances. Methods for developing system performance tolerance bounds are discussed and applied to aid in the interpretation of the trends in this risk-based indicator. Some additional characteristics of the SSFT indicator, learned through the data-collection efforts and subsequent data analyses performed, are also discussed. The usefulness and practicality of other data sources for validation purposes are explored. Further validation of this indicator is noted. Also, additional research is underway in developing a more detailed estimator of system unavailability. 9 refs., 18 figs., 5 tabs

A computerized system to monitor resilience indicators in organizations.

Science.gov (United States)

de Carvalho, Paulo Victor Rodrigues; de Souza, Alan Pinheiro; Gomes, Jose Orlando

2012-01-01

The concepts developed by resilience engineering allow the understanding and monitoring the functioning of organizations and, particularly, to map the role of human activities, in success or in failure, enabling a better comprehension about how people make decisions in unexpected situations. The capture of information about human activities in the various organization levels gives managers a deeper real-time understanding of what is influencing the people performance, providing awareness of the factors that influence positively or negatively the organizational goals initially projected. The monitoring is important because the correct functioning of complex systems depends on the knowledge that people have to perform their activities and how the system environment provides tools that actually support the human performance. Therefore, organizations should look forward through precursors in operating signals to identify possible problems or solutions in the structure of tasks and activities, safety, quality, schedule, rework, and maintenance. We apply the concepts of resilience engineering to understand the organization by the analysis of cognitive tasks and activities. The aim is the development of a computerized system to monitor human activities to produce indicators to access system resilience. The validation of the approach was made in a real organization and the results show the successful applicability of the system. Based on findings obtained after the experiment of the system in a real organization, and managers and workers opinions, it was possible to show that the use of system provided an anticipated (real-time) perception about how activities are effectively being performed, allowing managers and workers to make decisions more consistent with daily problems, and also to anticipate solutions to cope with unexpected situations.

Extra-analytical quality indicators and laboratory performances.

Science.gov (United States)

Sciacovelli, Laura; Aita, Ada; Plebani, Mario

2017-07-01

In the last few years much progress has been made in raising the awareness of laboratory medicine professionals about the effectiveness of quality indicators (QIs) in monitoring, and improving upon, performances in the extra-analytical phases of the Total Testing Process (TTP). An effective system for management of QIs includes the implementation of an internal assessment system and participation in inter-laboratory comparison. A well-designed internal assessment system allows the identification of critical activities and their systematic monitoring. Active participation in inter-laboratory comparison provides information on the performance level of one laboratory with respect to that of other participating laboratories. In order to guarantee the use of appropriate QIs and facilitate their implementation, many laboratories have adopted the Model of Quality Indicators (MQI) proposed by Working Group "Laboratory Errors and Patient Safety" (WG-LEPS) of IFCC, since 2008, which is the result of international consensus and continuous experimentation, and updating to meet new, constantly emerging needs. Data from participating laboratories are collected monthly and reports describing the statistical results and evaluating laboratory data, utilizing the Six Sigma metric, issued regularly. Although the results demonstrate that the processes need to be improved upon, overall the comparison with data collected in 2014 shows a general stability of quality levels and that an improvement has been achieved over time for some activities. The continuous monitoring of QI data allows identification all possible improvements, thus highlighting the value of participation in the inter-laboratory program proposed by WG-LEPS. The active participation of numerous laboratories will guarantee an ever more significant State-of-the-Art, promote the reduction of errors and improve quality of the TTP, thus guaranteeing patient safety. Copyright © 2017. Published by Elsevier Inc.

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models.

Science.gov (United States)

Pope, Ronald; Wu, Jianguo

2014-06-01

In the United States, air pollution is primarily measured by Air Quality Monitoring Networks (AQMN). These AQMNs have multiple objectives, including characterizing pollution patterns, protecting the public health, and determining compliance with air quality standards. In 2006, the U.S. Environmental Protection Agency issued a directive that air pollution agencies assess the performance of their AQMNs. Although various methods to design and assess AQMNs exist, here we demonstrate a geographic information system (GIS)-based approach that combines environmental, economic, and social indicators through the assessment of the ozone (O3) and particulate matter (PM10) networks in Maricopa County, Arizona. The assessment was conducted in three phases: (1) to evaluate the performance of the existing networks, (2) to identify areas that would benefit from the addition of new monitoring stations, and (3) to recommend changes to the AQMN. A comprehensive set of indicators was created for evaluating differing aspects of the AQMNs' objectives, and weights were applied to emphasize important indicators. Indicators were also classified according to their sustainable development goal. Our results showed that O3 was well represented in the county with some redundancy in terms of the urban monitors. The addition of weights to the indicators only had a minimal effect on the results. For O3, urban monitors had greater social scores, while rural monitors had greater environmental scores. The results did not suggest a need for adding more O3 monitoring sites. For PM10, clustered urban monitors were redundant, and weights also had a minimal effect on the results. The clustered urban monitors had overall low scores; sites near point sources had high environmental scores. Several areas were identified as needing additional PM10 monitors. This study demonstrates the usefulness of a multi-indicator approach to assess AQMNs. Network managers and planners may use this method to assess the

Key performance indicators

NARCIS (Netherlands)

Zwetsloot, G.I.J.M.

2014-01-01

This paper addresses how organisations can use OSH performance indicators. This is an important way to mainstream OSH into business management. Key performance indicators (KPIs) should provide objective data on the OSH situation. It is often said that ‘what gets measured gets managed’. Without

Digital Image Correlation for Performance Monitoring

Science.gov (United States)

Palaviccini, Miguel; Turner, Dan; Herzberg, Michael

2016-01-01

Evaluating the health of a mechanism requires more than just a binary evaluation of whether an operation was completed. It requires analyzing more comprehensive, full-field data. Health monitoring is a process of non-destructively identifying characteristics that indicate the fitness of an engineered component. In order to monitor unit health in a production setting, an automated test system must be created to capture the motion of mechanism parts in a real-time and non-intrusive manner. One way to accomplish this is by using high-speed video and Digital Image Correlation (DIC). In this approach, individual frames of the video are analyzed to track the motion of mechanism components. The derived performance metrics allow for state-of-health monitoring and improved fidelity of mechanism modeling. The results are in-situ state-of-health identification and performance prediction. This paper introduces basic concepts of this test method, and discusses two main themes: the use of laser marking to add fiducial patterns to mechanism components, and new software developed to track objects with complex shapes, even as they move behind obstructions. Finally, the implementation of these tests into an automated tester is discussed.

Use of EEG workload indices for diagnostic monitoring of vigilance decrement.

Science.gov (United States)

Kamzanova, Altyngul T; Kustubayeva, Almira M; Matthews, Gerald

2014-09-01

A study was run to test which of five electroencephalographic (EEG) indices was most diagnostic of loss of vigilance at two levels of workload. EEG indices of alertness include conventional spectral power measures as well as indices combining measures from multiple frequency bands, such as the Task Load Index (TLI) and the Engagement Index (El). However, it is unclear which indices are optimal for early detection of loss of vigilance. Ninety-two participants were assigned to one of two experimental conditions, cued (lower workload) and uncued (higher workload), and then performed a 40-min visual vigilance task. Performance on this task is believed to be limited by attentional resource availability. EEG was recorded continuously. Performance, subjective state, and workload were also assessed. The task showed a vigilance decrement in performance; cuing improved performance and reduced subjective workload. Lower-frequency alpha (8 to 10.9 Hz) and TLI were most sensitive to the task parameters. The magnitude of temporal change was larger for lower-frequency alpha. Surprisingly, higher TLI was associated with superior performance. Frontal theta and El were influenced by task workload only in the final period of work. Correlational data also suggested that the indices are distinct from one another. Lower-frequency alpha appears to be the optimal index for monitoring vigilance on the task used here, but further work is needed to test how diagnosticity of EEG indices varies with task demands. Lower-frequency alpha may be used to diagnose loss of operator alertness on tasks requiring vigilance.

Improving engineering performance by utilizing process indicators

International Nuclear Information System (INIS)

Roberts, T.E.

1992-01-01

The purpose of the work discussed in this paper was to develop engineering performance indicators used to facilitate improvement to the technical quality, cost-effectiveness, and delivery of engineering products and service. This work was specifically tailored for engineering support products and service associated with operating Florida Power and Light Company (FP and L) nuclear plants. The engineering process for the development of plant change packages was reviewed to identify critical in-process activities. Because each engineering project usually deals with a specific component or plant system, the different tasks are usually technically unique and of varying magnitudes. Although each engineering product may employ different analytical techniques or industry code requirements, several activities in documenting the engineering design process are generic. The quality of performance in these activities can be monitored analogously to the steps in a manufacturing process. This concept builds quality concepts into the package in lieu of inspecting package quality at the end of the process. The work has resulted in a valuable self-assessment tool that serves as a basis for engineering process improvements. The indicators are published in a semi-yearly performance report for FP and L contractors as well as FP and L in-house engineering work. Contracts have been set up to base fees on meeting targets established for the performance report. The ability to meet performance targets continues to improve

Indicators for Monitoring Water, Sanitation, and Hygiene: A Systematic Review of Indicator Selection Methods

Directory of Open Access Journals (Sweden)

Stefanie Schwemlein

2016-03-01

Full Text Available Monitoring water, sanitation, and hygiene (WaSH is important to track progress, improve accountability, and demonstrate impacts of efforts to improve conditions and services, especially in low- and middle-income countries. Indicator selection methods enable robust monitoring of WaSH projects and conditions. However, selection methods are not always used and there are no commonly-used methods for selecting WaSH indicators. To address this gap, we conducted a systematic review of indicator selection methods used in WaSH-related fields. We present a summary of indicator selection methods for environment, international development, and water. We identified six methodological stages for selecting indicators for WaSH: define the purpose and scope; select a conceptual framework; search for candidate indicators; determine selection criteria; score indicators against criteria; and select a final suite of indicators. This summary of indicator selection methods provides a foundation for the critical assessment of existing methods. It can be used to inform future efforts to construct indicator sets in WaSH and related fields.

Indicator Organisms: Learner's Guide for a Critical Path in Water Quality Monitoring.

Science.gov (United States)

Glazer, Richard B.; And Others

This learner's guide on indicator organisms is derived from a water monitoring curriculum developed at Ulster County Community College. There are 37 modules in this guide; each is introduced with a statement of purpose and then broken down into units of instruction. These units contain an objective, learning conditions, and a performance level.…

Monitoring the performances of a real scale municipal solid waste composting and a biodrying facility using respiration activity indices.

Science.gov (United States)

Evangelou, Alexandros; Gerassimidou, Spyridoula; Mavrakis, Nikitas; Komilis, Dimitrios

2016-05-01

Objective of the work was to monitor two full-scale commingled municipal solid waste (MSW) mechanical and biological pretreatment (MBT) facilities in Greece, namely a biodrying and a composting facility. Monitoring data from a 1.5-year sampling period is presented, whilst microbial respiration indices were used to monitor the decomposition process and the stability status of the wastes in both facilities during the process. Results showed that in the composting facility, the organic matter reduced by 35 % after 8 weeks of combined composting/curing. Material exiting the biocells had a moisture content of less than 30 % (wb) indicating a moisture limitation during the active composting process. The static respiration indexes indicated that some stabilization occurred during the process, but the final material could not be characterized as stable compost. In the biodrying facility, the initial and final moisture contents were 50 % and less than 20 % wb, respectively, and the biodrying index was equal to 4.1 indicating effective biodrying. Lower heating values at the inlet and outlet were approximately 5.5 and 10 MJ/wet kg, respectively. The organic matter was reduced by 20 % during the process and specifically from a range of 63-77 % dw (inlet) to a range of 61-70 % dw. A significant respiration activity reduction was observed for some of the biodrying samples. A statistically significant correlation among all three respiration activity indices was recorded, with the two oxygen related activity indices (CRI7 and SRI24) observing the highest correlation.

Development of an indicator to monitor mediterranean wetlands.

Science.gov (United States)

Sanchez, Antonio; Abdul Malak, Dania; Guelmami, Anis; Perennou, Christian

2015-01-01

Wetlands are sensitive ecosystems that are increasingly subjected to threats from anthropogenic factors. In the last decades, coastal Mediterranean wetlands have been suffering considerable pressures from land use change, intensification of urban growth, increasing tourism infrastructure and intensification of agricultural practices. Remote sensing (RS) and Geographic Information Systems (GIS) techniques are efficient tools that can support monitoring Mediterranean coastal wetlands on large scales and over long periods of time. The study aims at developing a wetland indicator to support monitoring Mediterranean coastal wetlands using these techniques. The indicator makes use of multi-temporal Landsat images, land use reference layers, a 50m numerical model of the territory (NMT) and Corine Land Cover (CLC) for the identification and mapping of wetlands. The approach combines supervised image classification techniques making use of vegetation indices and decision tree analysis to identify the surface covered by wetlands at a given date. A validation process is put in place to compare outcomes with existing local wetland inventories to check the results reliability. The indicator´s results demonstrate an improvement in the level of precision of change detection methods achieved by traditional tools providing reliability up to 95% in main wetland areas. The results confirm that the use of RS techniques improves the precision of wetland detection compared to the use of CLC for wetland monitoring and stress the strong relation between the level of wetland detection and the nature of the wetland areas and the monitoring scale considered.

Evaluation of indices for voltage stability monitoring using PMU measurements

Directory of Open Access Journals (Sweden)

Sindy Lorena Ramirez Perdomo

2014-09-01

Full Text Available Large disturbances such as voltage collapse and its consequences represent a large challenge to the operational safety of power systems. Therefore, it is important to have indicators of the presence of voltage stability problems in real time. Using phasor measure-ments of voltage and current that are presented in Phasor Measurement Units (PMU, indices for voltage stability monitoring can be calculated in real time. This paper presents some indices for voltage stability monitoring using PMU measurements. Evaluation of such indices on a simplified system was carried out, and the indices were classified according to their method of calculation. Finally, one of these indices was used with the New England 39-bus system under different operating scenarios, including load increments, line output and generator output, to check the indices’ behavior for voltage stability monitoring based on synchronized local measurements.

RULES FOR SELECTING AND USING KEY PERFORMANCE INDICATORS FOR THE SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

Alexandra - Elena RUSĂNEANU

2014-06-01

Full Text Available There is no question that performance is the desired result of every activity or action. In order to correctly measure an organization’s performance it is necessary to select key performance indicators (KPIs that will deliver long-term value to the company. KPIs are presenting performance information for all levels of the organization and they are reflecting the progress made so far to achieve strategic objectives. The selection of the key performance indicators must be made according to the organization’s industry and activity. The company must truly understand its business and its mission. Also, KPIs must be closely linked to the strategic objectives. The focus of this research is to present effective rules for defining key performance indicators for the Service industry. This sector of economy consists in generating intangible goods like experience, expertise and information. Therefore, monitoring this type of services requires a different approach when defining performance indicators compared to the manufacturing industry.

Performance indicators for power reactors

International Nuclear Information System (INIS)

Gillies, C.; White, M.

1995-11-01

A review of Canadian and worldwide performance indicator definitions and data was performed to identify a set of indicators that could be used for comparison of performance among nuclear power plants. The results of this review are to be used as input to an AECB team developing a consistent set of performance indicators for measuring Canadian power reactor safety performance. To support the identification of performance indicators, a set of criteria was developed to assess the effectiveness of each indicator for meaningful comparison of performance information. The project identified a recommended set of performance indicators that could be used by AECB staff to compare the performance of Canadian nuclear power plants among themselves, and with international performance. The basis for selection of the recommended set and exclusion of others is provided. This report provides definitions and calculation methods for each recommended performance indicator. In addition, a spreadsheet has been developed for comparison and trending for the recommended set of indicators. Example trend graphs are included to demonstrate the use of the spreadsheet. (author). 50 refs., 11 tabs., 3 figs

Condition Indicators for Gearbox Condition Monitoring Systems

Directory of Open Access Journals (Sweden)

P. Večeř

2005-01-01

Full Text Available Condition monitoring systems for manual transmissions based on vibration diagnostics are widely applied in industry. The systems deal with various condition indicators, most of which are focused on a specific type of gearbox fault. Frequently used condition indicators (CIs are described in this paper. The ability of a selected condition indicator to describe the degree of gearing wear was tested using vibration signals acquired during durability testing of manual transmission with helical gears. 

Evaluation of the RSG-GAS Alpha-Beta Aerosol Contaminant Monitor Performance Under Reactor Operation Condition

International Nuclear Information System (INIS)

Hartoyo, Unggul; Setiawanto, Anto; Sumarno, Yulius

2000-01-01

Analysis to evaluate the RSG-GAS alpha-beta aerosol contaminant monitor performance was done. The high potential radiation working area such as in RSG-GAS is important to monitored for personal safety. Further it is necessary to assure that the system monitor is reliable enough under normal conditions as well as emergency condition. The method uses in this analysis are monitoring and comparing with the standard source. The standard course indicator and panel in main control room indicate that the result is 1 x 110 exp 9 Ci/m exp 3. Based on data monitor observation, the RSG-GAS alpha-beta aerosol contaminant monitor system under reactor operation condition has a good enough performance

Performance indicators for rinderpest surveillance

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

In 1986, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a programme of assistance to FAO and IAEA Member States for the development of effective, quality assured veterinary laboratory diagnostic services. This programme introduced the use of standardized and internationally validated ELISA-based systems for the diagnosis and surveillance of the major transboundary diseases that affect livestock. This approach has proved of immense value in the monitoring of national, regional and global animal disease control and eradication programmes. One such programme focuses on the global elimination of rinderpest. Co-ordinated by FAO through the Global Rinderpest Eradication Programme (GREP) the joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has developed critical diagnostic and epidemiological tools to assist this effort. As the final stages of the global eradication of rinderpest are reached, it is fitting that the Joint Division should again take the lead in providing guidance to Member States on how best to meet the criteria for quality assurance of national disease surveillance programmes - a prerequisite for international acceptance of freedom from a particular disease. This publication is intended to provide countries involved in rinderpest eradication with a detailed protocol for using performance indicators in evaluating their disease surveillance system and making, where necessary, adjustments to meet the criteria for acceptance specified in the OIE Rinderpest Pathway - a pathway that leads to international recognition of freedom from rinderpest. An initial publication (IAEA-TECDOC-1161) described guidelines for the use of performance indicators in rinderpest surveillance programmes. This publication now describes in detail the protocols and the linked indicators which have been developed and field validated through a series of FAO/IAEA meetings and through IAEA expert assignments to countries in Africa.

Performance indicators for rinderpest surveillance

International Nuclear Information System (INIS)

2001-12-01

In 1986, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a programme of assistance to FAO and IAEA Member States for the development of effective, quality assured veterinary laboratory diagnostic services. This programme introduced the use of standardized and internationally validated ELISA-based systems for the diagnosis and surveillance of the major transboundary diseases that affect livestock. This approach has proved of immense value in the monitoring of national, regional and global animal disease control and eradication programmes. One such programme focuses on the global elimination of rinderpest. Co-ordinated by FAO through the Global Rinderpest Eradication Programme (GREP) the joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has developed critical diagnostic and epidemiological tools to assist this effort. As the final stages of the global eradication of rinderpest are reached, it is fitting that the Joint Division should again take the lead in providing guidance to Member States on how best to meet the criteria for quality assurance of national disease surveillance programmes - a prerequisite for international acceptance of freedom from a particular disease. This publication is intended to provide countries involved in rinderpest eradication with a detailed protocol for using performance indicators in evaluating their disease surveillance system and making, where necessary, adjustments to meet the criteria for acceptance specified in the OIE Rinderpest Pathway - a pathway that leads to international recognition of freedom from rinderpest. An initial publication (IAEA-TECDOC-1161) described guidelines for the use of performance indicators in rinderpest surveillance programmes. This publication now describes in detail the protocols and the linked indicators which have been developed and field validated through a series of FAO/IAEA meetings and through IAEA expert assignments to countries in Africa

Some indicators for impacts monitoring on coastal beaches

International Nuclear Information System (INIS)

Anido, C.

2007-01-01

Coastline is an environmental place with assets as recreational and productive value. Monitoring of State is necessary for management of reactions to human action, extreme storms or climate change needs indicators as instruments for measuring evolution. Indicators need to be simple, easy to gauge and to make public, so as to be used in Agendas 21 or human development sustain ability.geologic couches associated to storm high energy and rocks visible s in beaches can be used as indicators. Playa Ramirez, near the center city, shows a high energy couch e mostly linked to a great storm in August 2005 and gneiss rocks from Montevideo formation more o less covered with sand responding to storms and currents transport balance. Both can be indicators integrating storms and currents effects useful for monitoring specific systems, which are to be identified in each part of the coast. (author)

Optimal energy management of urban rail systems: Key performance indicators

International Nuclear Information System (INIS)

González-Gil, A.; Palacin, R.; Batty, P.

2015-01-01

Highlights: • An overall picture of urban rail energy use is provided. • Performance indicators are developed for urban rail system energy optimisation. • A multi-level methodology for assessing energy efficiency measures is presented. - Abstract: Urban rail systems are facing increasing pressure to minimise their energy consumption and thusly reduce their operational costs and environmental impact. However, given the complexity of such systems, this can only be effectively achieved through a holistic approach which considers the numerous interdependences between subsystems (i.e. vehicles, operations and infrastructure). Such an approach requires a comprehensive set of energy consumption-related Key Performance Indicators (KEPIs) that enable: a multilevel analysis of the actual energy performance of the system; an assessment of potential energy saving strategies; and the monitoring of the results of implemented measures. This paper proposes an original, complete list of KEPIs developed through a scientific approach validated by different stakeholders. It consists of a hierarchical list of 22 indicators divided into two levels: 10 key performance indicators, to ascertain the performance of the whole system and complete subsystems; and 12 performance indicators, to evaluate the performance of single units within subsystems, for example, a single rail vehicle or station. Additionally, the paper gives a brief insight into urban rail energy usage by providing an adequate context in which to understand the proposed KEPIs, together with a methodology describing their application when optimising the energy consumption of urban rail systems

Performance Monitoring Applied to System Supervision

Directory of Open Access Journals (Sweden)

Bertille Somon

2017-07-01

Full Text Available Nowadays, automation is present in every aspect of our daily life and has some benefits. Nonetheless, empirical data suggest that traditional automation has many negative performance and safety consequences as it changed task performers into task supervisors. In this context, we propose to use recent insights into the anatomical and neurophysiological substrates of action monitoring in humans, to help further characterize performance monitoring during system supervision. Error monitoring is critical for humans to learn from the consequences of their actions. A wide variety of studies have shown that the error monitoring system is involved not only in our own errors, but also in the errors of others. We hypothesize that the neurobiological correlates of the self-performance monitoring activity can be applied to system supervision. At a larger scale, a better understanding of system supervision may allow its negative effects to be anticipated or even countered. This review is divided into three main parts. First, we assess the neurophysiological correlates of self-performance monitoring and their characteristics during error execution. Then, we extend these results to include performance monitoring and error observation of others or of systems. Finally, we provide further directions in the study of system supervision and assess the limits preventing us from studying a well-known phenomenon: the Out-Of-the-Loop (OOL performance problem.

5 CFR 430.306 - Monitoring performance.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Monitoring performance. 430.306 Section 430.306 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Managing Senior Executive Performance § 430.306 Monitoring performance. (a) Supervisors must...

Monitoring Pharmacy Student Adherence to World Health Organization Hand Hygiene Indications Using Radio Frequency Identification.

Science.gov (United States)

Decker, Andrew S; Cipriano, Gabriela C; Tsouri, Gill; Lavigne, Jill E

2016-04-25

Objective. To assess and improve student adherence to hand hygiene indications using radio frequency identification (RFID) enabled hand hygiene stations and performance report cards. Design. Students volunteered to wear RFID-enabled hospital employee nametags to monitor their adherence to hand-hygiene indications. After training in World Health Organization (WHO) hand hygiene methods and indications, student were instructed to treat the classroom as a patient care area. Report cards illustrating individual performance were distributed via e-mail to students at the middle and end of each 5-day observation period. Students were eligible for individual and team prizes consisting of Starbucks gift cards in $5 increments. Assessment. A hand hygiene station with an RFID reader and dispensing sensor recorded the nametag nearest to the station at the time of use. Mean frequency of use per student was 5.41 (range: 2-10). Distance between the student's seat and the dispenser was the only variable significantly associated with adherence. Student satisfaction with the system was assessed by a self-administered survey at the end of the study. Most students reported that the system increased their motivation to perform hand hygiene as indicated. Conclusion. The RFID-enabled hand hygiene system and benchmarking reports with performance incentives was feasible, reliable, and affordable. Future studies should record video to monitor adherence to the WHO 8-step technique.

Safety performance indicators. Topical issues paper no. 5

International Nuclear Information System (INIS)

Dahlgren, K.; Lederman, L.; Szikszai, T.; Palomo, J.

2001-01-01

Since its creation the nuclear industry has been struggling with the question of how safe is safe enough. Safety is a common goal to all involved in the design, operation and regulation of a nuclear installation. As a concept safety is not easy to define. However, there is a general understanding of what attributes a nuclear power plant should have in order to operate safely. The challenge lies in measuring the attributes. The new competitive open electricity market, in many countries throughout the world, is increasing the economic pressure on operators to lower operating costs without jeopardizing safety. Challenges are occurring at a rate that is unprecedented in the nuclear industry: competitiveness; downsizing; ageing; policy changes; reorganization; restructuring; mergers; globalization; and takeovers demand increasing attention to the management of safety. There are various means to measure safety performance, some of which are more qualitative in nature and others which through quantitative measures provide the means by which to evaluate performance trends with clear ties to safety. According to their use, indicators are generally considered in two groups: leading or proactive and lagging or reactive indicators. Leading indicators are most useful as a precursor to safety degradation for early management reaction. Lagging indicators are most commonly used to drive plant performance, to monitor and for benchmarking against similar plants. The actual values of the indicators are not intended to be direct measures of safety, although safety performance can be inferred from the results achieved. Each plant needs to determine which indicators best serve its needs. Selected indicators should not be static, but should be adapted to the conditions and performance of the plant, considering the cost-benefit of maintaining each individual indicator. It should be recognized that while indicators provide valuable information in the effective management of plant safety

An Approach for Automatically Deriving Key Performance Indicators from Ontological Enterprise Models

NARCIS (Netherlands)

Aksu, U.A.; Schunselaar, D.M.M.; Reijers, H.A.

2017-01-01

Organizations use Key Performance Indicators (KPIs) to monitor whether they attain their goals. Software vendors that supply generic software provide predefined KPIs in their software products for these organizations. However, each organization wants KPIs to be tailored to its specific goals.Th

Some indicators about coastal impacts monitoring

International Nuclear Information System (INIS)

Anido, C.

2007-01-01

Coastline is an environmental place with assets as recreational and productive value. Monitoring of State is necessary for management of reactions to human action, extreme storms or climate change needs indicators as instruments for measuring evolution. Indicators need to be simple, easy to gauge and to make public, so as to be used in Agendas 21 or human development sustain ability. The geologic couches associated to storm high energy and rocks visible s in beaches can be used as indicators. Playa Ramirez, near the center city, shows a high energy couch e mostly linked to a great storm in August 2005 and rocks more o less covered with sand responding to storms and currents transport balance. Both can be indicators integrating effects useful for specific systems, which are to be identified in each part of the coast. (author)

Heat exchanger performance monitoring guidelines

International Nuclear Information System (INIS)

Stambaugh, N.; Closser, W. Jr.; Mollerus, F.J.

1991-12-01

Fouling can occur in many heat exchanger applications in a way that impedes heat transfer and fluid flow and reduces the heat transfer or performance capability of the heat exchanger. Fouling may be significant for heat exchanger surfaces and flow paths in contact with plant service water. This report presents guidelines for performance monitoring of heat exchangers subject to fouling. Guidelines include selection of heat exchangers to monitor based on system function, safety function and system configuration. Five monitoring methods are discussed: the heat transfer, temperature monitoring, temperature effectiveness, delta P and periodic maintenance methods. Guidelines are included for selecting the appropriate monitoring methods and for implementing the selected methods. The report also includes a bibliography, example calculations, and technical notes applicable to the heat transfer method

Risk-based safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Chakraborty, S.; Prohaska, G.; Flodin, Y.; Grint, G.; Habermacher, H.; Hallman, A.; Isasia, R.; Melendez, E.; Verduras, E.; Karsa, Z.; Khatib-Rahbar, M.; Koeberlein, K.; Schwaeger, C.; Matahri, N.; Moravcik, I.; Tkac, M.; Preston, J.

2003-01-01

In a Concerted Action (CA), sponsored by the European Commission within its 5th Framework Program, a consortium of eleven partners from eight countries has reviewed and evaluated the application of Safety Performance Indicators (SPIs), which - in combination with other tools - can be used to monitor and improve the safety of nuclear power plants. The project was aimed at identification of methods that can be used in a risk-informed regulatory system and environment, and to exploit PSA techniques for the development and use of meaningful additional/alternative SPIs. The CA included the review of existing indicator systems, and the collection of information on the experience from indicator systems by means of a specific questionnaire. One of the most important and challenging issues for nuclear plant owners and/or regulators is to recognize early signs of deterioration in safety performance, caused by influences from management, organization and safety culture (MOSC), before actual events and/or mishaps take place. Most of the existing SPIs as proposed by various organizations are considered as 'lagging' indicators, that is, they are expected to show an impact only when a downward trend has already started. Furthermore, most of the available indicators are at a relatively high level, such that they will not provide useful information on fundamental weaknesses causing the problem in the first place. Regulators' and utilities' views on the use of a Safety Performance Indicator System have also been a part of the development of the CA. (author)

Investigate the Capabilities of Remotely Sensed Crop Indicators for Agricultural Drought Monitoring in Kansas

Science.gov (United States)

Zhang, J.; Becker-Reshef, I.; Justice, C. O.

2013-12-01

Although agricultural production has been rising in the past years, drought remains the primary cause of crop failure, leading to food price instability and threatening food security. The recent 'Global Food Crisis' in 2008, 2011 and 2012 has put drought and its impact on crop production at the forefront, highlighting the need for effective agricultural drought monitoring. Satellite observations have proven a practical, cost-effective and dynamic tool for drought monitoring. However, most satellite based methods are not specially developed for agriculture and their performances for agricultural drought monitoring still need further development. Wheat is the most widely grown crop in the world, and the recent droughts highlight the importance of drought monitoring in major wheat producing areas. As the largest wheat producing state in the US, Kansas plays an important role in both global and domestic wheat markets. Thus, the objective of this study is to investigate the capabilities of remotely sensed crop indicators for effective agricultural drought monitoring in Kansas wheat-grown regions using MODIS data and crop yield statistics. First, crop indicators such as NDVI, anomaly and cumulative metrics were calculated. Second, the varying impacts of agricultural drought at different stages were explored by examining the relationship between the derived indicators and yields. Also, the starting date of effective agricultural drought early detection and the key agricultural drought alert period were identified. Finally, the thresholds of these indicators for agricultural drought early warning were derived and the implications of these indicators for agricultural drought monitoring were discussed. The preliminary results indicate that drought shows significant impacts from the mid-growing-season (after Mid-April); NDVI anomaly shows effective drought early detection from Late-April, and Late-April to Early-June can be used as the key alert period for agricultural

Safety performance indicators program

International Nuclear Information System (INIS)

Vidal, Patricia G.

2004-01-01

In 1997 the Nuclear Regulatory Authority (ARN) initiated a program to define and implement a Safety Performance Indicators System for the two operating nuclear power plants, Atucha I and Embalse. The objective of the program was to incorporate a set of safety performance indicators to be used as a new regulatory tool providing an additional view of the operational performance of the nuclear power plants, improving the ability to detect degradation on safety related areas. A set of twenty-four safety performance indicators was developed and improved throughout pilot implementation initiated in July 1998. This paper summarises the program development, the main criteria applied in each stage and the results obtained. (author)

Amalgamation of Anomaly-Detection Indices for Enhanced Process Monitoring

KAUST Repository

Harrou, Fouzi

2016-01-29

Accurate and effective anomaly detection and diagnosis of modern industrial systems are crucial for ensuring reliability and safety and for maintaining desired product quality. Anomaly detection based on principal component analysis (PCA) has been studied intensively and largely applied to multivariate processes with highly cross-correlated process variables; howver conventional PCA-based methods often fail to detect small or moderate anomalies. In this paper, the proposed approach integrates two popular process-monitoring detection tools, the conventional PCA-based monitoring indices Hotelling’s T2 and Q and the exponentially weighted moving average (EWMA). We develop two EWMA tools based on the Q and T2 statistics, T2-EWMA and Q-EWMA, to detect anomalies in the process mean. The performances of the proposed methods were compared with that of conventional PCA-based anomaly-detection methods by applying each method to two examples: a synthetic data set and experimental data collected from a flow heating system. The results clearly show the benefits and effectiveness of the proposed methods over conventional PCA-based methods.

Performance monitoring of safeguards equipment

International Nuclear Information System (INIS)

Sirisena, K.; Peltoranta, M.; Goussarov, V.; Vodrazka, P.

1999-01-01

SGTCS is responsible for monitoring and reporting the performance of the SG equipment. Performance monitoring (PM) has been implemented in most important safeguards equipment operating unattended in nuclear facilities. Inspectors acquire equipment performance data in facilities. After inspection, the data package is submitted to SGTCS for processing and analysis. The performance data is used for identification of systems or components, which should be changed in the field and for identification of modules which, should be diagnosed at HQ in order to determine the cause of failure. Moreover, the performance data is used for preventive maintenance and spares distribution planning, and to provide statistics for official reports and management decision making. An important part of the performance monitoring is reporting. Equipment performance reports contain information about equipment inventory, utilization, failure types, failure distribution, and reliability. Trends in performance are given in graphical form in cases, where past data is available. Reliability estimates such as expected times between failures are provided. The automated reporting tools are obtainable through EMIS database application. (author)

Application of balanced score card in the development of performance indicator system in nuclear power plant

International Nuclear Information System (INIS)

Shen Shuguang; Huang Fang; Fang Zhaoxia

2013-01-01

Performance indicator, which is one of ten performance monitoring tools recommended by WANO performance improvement model, has become an effective tool for performance improvement of nuclear power plant. At present, performance indicator system has been built in nuclear power plant. However, how to establish the performance indicator system that is reasonable and applicable for plant is still a question to be discussed. Performance indictor is closely tied to the strategic direction of a corporation by a balanced score card, and the performance indicator system is established from the point of performance management and strategic development. The performance indicator system of nuclear power plant is developed by introducing the balanced score card, and can be as a reference for other domestic nuclear power plants. (authors)

Development of high-performance monitoring system under severe accident condition

International Nuclear Information System (INIS)

Takeuchi, Tomoaki; Tsuchiya, Kunihiro; Ishihara, Masahiro; Komanome, H.; Miura, K.

2017-01-01

A research and development of a monitoring system for NPPs situations even during severe accidents have been performed. The R and D consists of the three objectives. The major findings are briefly summarized in the followings: 1) Radiation-resistant monitoring camera. The image sensor with the photogate and three transistors was found to be advantageous in terms of dark current and sensitivity. In addition, radiation-resistant optical parts and signal circuits were successfully fabricated. The results suggested that the monitoring camera system with 10 6 Gy in radiation resistance was possible. 2) Radiation-resistant in-water wireless transmission system. A two-dimensional LED matrix with 10 6 Gy in radiation resistance and a camera were used as the transmission devices. The results of the in-water transmission tests suggested that stable wireless transmission between 5 m distance was possible even with bubble, turbidity, or obstacles. 3) Heat-resistant signal cable. In order to develop a cable that can transmit the data inside reactor pressure vessels, heat-proof tests were performed for candidate metallic sheath materials of mineral insulation (MI) cables. The results indicated MI cables which can be used at 1000degC in air were possible. These results indicate the feasibility of the monitoring system even during severe accidents. (author)

Performance management in healthcare : performance indicator development, task uncertainty, and types of performance indicators

NARCIS (Netherlands)

Geer-Rutten-Rijswijk, van der E.; Tuijl, van H.F.J.M.; Rutte, C.G.

2009-01-01

In healthcare, performance indicators are increasingly used to measure and control quality and efficiency of care-providing teams. This article demonstrates that when controllability is emphasized during indicator development, the level of task uncertainty influences the type of resulting

TECHNOLOGY OF RADIATION MONITORING: TRACERS-INDICATORS OF DANGEROUS NATURAL AND TECHNOGENIC PHENOMENA

Directory of Open Access Journals (Sweden)

V. S. Yakovleva

2016-11-01

Full Text Available The analysis of results of experimental investigation concerning the influence of natural and technogenic events on radioactive gas and aerosols dynamics as well as structure and dynamics of different types of ionizing radiation in soil and ground atmosphere was performed. The results of the analysis were used to carry out of classification of revealed radiation tracersindicators of dangerous natural and technogenic phenomena. The algorithm of monitoring of optimum set of radiation tracers-indicators, which are measured simultaneously, of dangerous phenomena was developed. This algorithm uses the “2+1” rule for determining the optimum set of radiation tracers-indicators.

Risk-based plant performance indicators

International Nuclear Information System (INIS)

Boccio, J.L.; Azarm, M.A.; Hall, R.E.

1991-01-01

Tasked by the 1979 President's Commission on the Accident at Three Mile Island, the U.S. nuclear power industry has put into place a performance indicator program as one means for showing a demonstrable record of achievement. Largely through the efforts of the Institute of Nuclear Power Operations (INPO), plant performance data has, since 1983, been collected and analyzed to aid utility management in measuring their plants' performance progress. The U.S. Nuclear Regulatory Commission (NRC) has also developed a set of performance indicators. This program, conducted by NRC's Office for the Analysis and Evaluation of Operational Data (AEOD), is structured to present information on plant operational performance in a manner that could enhance the staff's ability to recognize changes in the safety performance. Both organizations recognized that performance indicators have limitations and could be subject to misinterpretation and misuse with the potential for an adverse impact on safety. This paper reports on performance indicators presently in use, e.g., unplanned automatic scrams, unplanned safety system actuation, safety system failures, etc., which are logically related to safety. But, a reliability/risk-based method for evaluating either individual indicators or an aggregated set of indicators is not yet available

Key performance indicators in British military trauma.

Science.gov (United States)

Stannard, Adam; Tai, Nigel R; Bowley, Douglas M; Midwinter, Mark; Hodgetts, Tim J

2008-08-01

Key performance indicators (KPI) are tools for assessing process and outcome in systems of health care provision and are an essential component in performance improvement. Although KPI have been used in British military trauma for 10 years, they remain poorly defined and are derived from civilian metrics that do not adjust for the realities of field trauma care. Our aim was to modify current trauma KPI to ensure they more faithfully reflect both the military setting and contemporary evidence in order to both aid accurate calibration of the performance of the British Defence Medical Services and act as a driver for performance improvement. A workshop was convened that was attended by senior, experienced doctors and nurses from all disciplines of trauma care in the British military. "Speciality-specific" KPI were developed by interest groups using evidence-based data where available and collective experience where this was lacking. In a final discussion these were streamlined into 60 KPI covering each phase of trauma management. The introduction of these KPI sets a number of important benchmarks by which British military trauma can be measured. As part of a performance improvement programme, these will allow closer monitoring of our performance and assist efforts to develop, train, and resource British military trauma providers.

Thermal performance monitoring and optimisation

International Nuclear Information System (INIS)

Sunde, Svein; Berg; Oeyvind

1998-01-01

Monitoring of the thermal efficiency of nuclear power plants is expected to become increasingly important as energy-market liberalisation exposes plants to increasing availability requirements and fiercer competition. The general goal in thermal performance monitoring is straightforward: to maximise the ratio of profit to cost under the constraints of safe operation. One may perceive this goal to be pursued in two ways, one oriented towards fault detection and cost-optimal predictive maintenance, and another determined at optimising target values of parameters in response to any component degradation detected, changes in ambient conditions, or the like. Annual savings associated with effective thermal-performance monitoring are expected to be in the order of $ 100 000 for power plants of representative size. A literature review shows that a number of computer systems for thermal-performance monitoring exists, either as prototypes or commercially available. The characteristics and needs of power plants may vary widely, however, and decisions concerning the exact scope, content and configuration of a thermal-performance monitor may well follow a heuristic approach. Furthermore, re-use of existing software modules may be desirable. Therefore, we suggest here the design of a flexible workbench for easy assembly of an experimental thermal-performance monitor at the Halden Project. The suggested design draws heavily on our extended experience in implementing control-room systems featured by assets like high levels of customisation, flexibility in configuration and modularity in structure, and on a number of relevant adjoining activities. The design includes a multi-computer communication system and a graphical user's interface, and aims at a system adaptable to any combination of in-house or end user's modules, as well as commercially available software. (author)

Development of a new quality fair access best value performance indicator (BVPI) for recycling services.

Science.gov (United States)

Harder, M K; Stantzos, N; Woodard, R; Read, A

2008-01-01

Recycling schemes are being used worldwide to reduce the impact of municipal waste. Those using public funds are usually obliged to set performance indicators by which the standards of such schemes can be measured. In the UK, a set of statutory Best Value Performance Indicators (BVPI) must be reported annually, such as the Quality of Fair Access, which monitors the public's access to recycling facilities within 1000 m (known as BVPI 91). This work shows that BVPI 91, and performance indicators like it, quantify only very basic recycling services. A much more sensitive performance indicator is developed in this paper, labelled as the Maximum Practicable Recycling Rate Provision (MPRRP) achievable by a local authority. It indicates the percentage of local waste that could be reasonably recycled using the services provided, calculated on the basis of the average composition of the local waste, the local population coverage for collection of any materials, and nationally provided information stating how much of each material stream is generally suitable (practical) for recycling. Evidence for the usefulness of this new quantity is presented. Although this paper refers a particular performance indicator in the UK, its findings are applicable to all urban areas worldwide needing to monitor recycling service. Furthermore, the MPRRP could be used for planning purposes, and for determining the level of performance of an existing service, by comparing its predicted recycling rate to that actually obtained. Further work is now being carried out on this.

Plant safety and performance indicators for regulatory use

International Nuclear Information System (INIS)

Ferjancic, M.; Nemec, T.; Cimesa, S.

2004-01-01

Slovenian Nuclear Safety Administration (SNSA) supervises nuclear and radiological safety of Krsko NPP. This SNSA supervision is performed through inspections, safety evaluations of plant modifications and event analyses as well as with the safety and performance indicators (SPI) which are a valuable data source for plant safety monitoring. In the past SNSA relied on the SPI provided by Krsko NPP and did not have a set of SPI which would be more appropriate for regulatory use. In 2003 SNSA started with preparation of a new set of SPI which would be more suitable for performing the regulatory oversight of the plant. New internal SNSA procedure which is under preparation will define use and evaluation of SPI and will include definitions for the proposed set of SPI. According to the evaluation of SPI values in comparison with the limiting values and/or trending, the procedure will define SNSA response and actions. (author)

New analysis and performance of a wall-current monitor

Energy Technology Data Exchange (ETDEWEB)

Suwada, T.; Urano, T.; Kobayashi, H. [National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan); Tamiya, K.; Asami, A. [Naruto University of Education, Takashima, Naruto-cho, Naruto-shi 772 (Japan)

1997-09-01

A new wall-current monitor has been developed in order to reinforce the beam-monitoring system in the PF 2.5-GeV linac for the KEK B-Factory. A prototype monitor was tested for its performance and characteristics. The experimental results in terms of both bench tests and beam tests by single-bunch electron beams were analyzed on the basis of equivalent-circuit models. The frequency response of the monitor agreed well with a lumped equivalent-circuit model for both time- and frequency-domain measurements. The position dependence and its frequency characteristics of the monitor also agreed well with a distributed equivalent-circuit model for both time- and frequency-domain measurements. The rise time of the monitor was about 3 ns, which indicated a poor response for short-pulse beams (<1) ns. The reason could be attributed to the stray inductance of the ceramic solid resistor and not very good frequency response of the ferrite core. (orig.).

New analysis and performance of a wall-current monitor

International Nuclear Information System (INIS)

Suwada, T.; Urano, T.; Kobayashi, H.; Tamiya, K.; Asami, A.

1997-01-01

A new wall-current monitor has been developed in order to reinforce the beam-monitoring system in the PF 2.5-GeV linac for the KEK B-Factory. A prototype monitor was tested for its performance and characteristics. The experimental results in terms of both bench tests and beam tests by single-bunch electron beams were analyzed on the basis of equivalent-circuit models. The frequency response of the monitor agreed well with a lumped equivalent-circuit model for both time- and frequency-domain measurements. The position dependence and its frequency characteristics of the monitor also agreed well with a distributed equivalent-circuit model for both time- and frequency-domain measurements. The rise time of the monitor was about 3 ns, which indicated a poor response for short-pulse beams (<1) ns. The reason could be attributed to the stray inductance of the ceramic solid resistor and not very good frequency response of the ferrite core. (orig.)

Proposal for the diagnosis and monitoring of quality, based on key performance indicators, that may lead to generate improvements in the Servicio de Radiologia of Hospital Mexico

International Nuclear Information System (INIS)

Brenes Acosta, Carolina; Cortes Barquero, Jorge

2014-01-01

Key performance indicators are proposed for the diagnosis, monitoring of quality and to generate improvements in the Servicio de Radiologia of Hospital Mexico. Critical performance key indicators are identified for service improvement. A method for collection of information is proposed of the individual production of medical assistants from Servicio de Radiologia of Hospital Mexico. Waiting times for patients in the ultrasound are measured in the Radiology Service, as indicator of patient experience and level of service. The satisfaction of treating physicians and their perception about the level quality of the service provided are identified with respect to the reports generated by the Departamento de Radiologia of Hospital Mexico. A peer review system is established to measure the clinical performance of the studies. A structured radiological report template is proposed for radiological practice in the Hospital Mexico, to facilitate its reading and guarantee a minimum standard of quality in information [es

E-Commerce Performance. Shopping Cart Key Performance Indicators

Directory of Open Access Journals (Sweden)

Mihaela I. MUNTEAN

2016-01-01

Full Text Available In an e-commerce performance framework is important to identify the key performance indicators that measure success and together provide the greatest context into the business perfor-mance. Shopping carts are an essential part of ecommerce, a minimal set of key performance indicators being the subject of our debate. The theoretical approach is sustained by a case study, an e-shop implemented using PHP and MySQL, for simulating main business processes within the considered performance framework. Our approach opens a perspective for future research using additional indicators in order to properly evaluate the global performance of any e-shop.

Technology and Innovation Management Indicators and Assessment Based on Government Performance

Directory of Open Access Journals (Sweden)

Sanja Marinković

2016-05-01

Full Text Available Throughout large global databases, such as OECD, UNDP, ITU, Eurostat, World Bank, and Statistical offices of countries, there are many indicators that refer to Technology and Innovation Management (TIM performance of countries. However, a question arises of how to classify and systematically analyze these indicators in terms of measuring, monitoring and enhancing TIM performance at a national level. More specifically, in this paper we pose a question of how to assess the government performance in TIM, as one aspect of the Triple Helix model. Therefore, we use a model of thirty-nine indicators which are classified according to three main management functions: planning, organizing and control, observed as input, process and output, respectively. More importantly, we analyze the relations that exist between these three categories of indicators. Planning indicators are observed as the investments in technological and innovative activities; organizing indicators include the infrastructure, public administration efficiency and cooperation support, while control indicators refer to the national economy R&D, transfer effects and entrepreneurship outcomes. The model is tested for assessing and comparing government performance in TIM for three countries: Serbia, Croatia and Slovenia, for the time period 2007-2012. Finally, as a feedback in the model, we used scores of the countries according to the Global Innovation Index and the Global Competitiveness Index, to verify the results and provide the final conclusion.

NRC performance indicator program

International Nuclear Information System (INIS)

Singh, R.N.

1987-01-01

The performance indicator development work of the US Nuclear Regulatory Commission (NRC) interoffice task group involved several major activities that included selection of candidate indicators for a trial program, data collection and review, validation of the trial indicators, display method development, interactions with the industry, and selection of an optimum set of indicators for the program. After evaluating 27 potential indicators against certain ideal attributes, the task group selected 17 for the trial program. The pertinent data for these indicators were then collected from 50 plants at 30 sites. The validation of the indicators consisted of two primary processes: logical validity and statistical analysis. The six indicators currently in the program are scrams, safety system actuations, significant events, safety system failures, forced outage rate, and equipment forced outages per 100 critical hours. A report containing data on the six performance indicators and some supplemental information is issued on a quarterly basis. The NRC staff is also working on refinements of existing indicators and development of additional indicators as directed by the commission

INDICATORS SYSTEM FOR MONITORING INTELLECTUAL PROPERTY MANAGEMENT IN COMPANIES

Directory of Open Access Journals (Sweden)

Alexandru STRATAN,

2018-02-01

Full Text Available Organizations and companies with a high level of competitiveness had developed intellectualproperty management systems that aim at assuring information and indicators for decision-making.Furthermore, the systematization and monitoring of information on intellectual property managementcontributes to the improvement, reliability, quality and efficiency of managerial efficiency, offering, in theend, to the company an image of its competitive advantages, generated by the intellectual property. The purpose of this work is to identify a system of indicators (benchmarks that can be used formonitoring through self-evaluation of the intellectual property management as part of a methodic approachon researching the intellectual property management system in companies. The main results achieved following the investigations were the development of a set of indicators(benchmarks for monitoring the management of intellectual property in companies. Also, being based onthis group of indicators, an integrated indicator for assessing the effectiveness of the management systemof intellectual property in companies had been developed.

Passive performance monitoring and traffic characteristics on the SLAC internet border

International Nuclear Information System (INIS)

Logg, C.; Cottrell, L.

2001-01-01

Understanding how the Internet is used by HEP is critical to optimizing the performance of the inter-lab computing environment. Typically use requirements have been defined by discussions between collaborators. However, later analysis of the actual traffic has show this is often misunderstood and actual use is significantly different to that predicted. Passive monitoring of the real traffic provides insight into the true communications requirements and the performance of a large number of inter-communicating nodes. It may be useful in identifying performance problems that are due to factors other than Internet congestion, especially when compared to other methods such as active monitoring where traffic is generated specifically to measure its performance. Controlled active monitoring between dedicated servers often gives an indication of what can be achieved on a network. Passive monitoring of the real traffic gives a picture of the true performance. The authors will discuss the method and results of collecting and analyzing flows of data obtained from the SLAC Internet border. The insights this has brought to understanding the network will be reviewed and the benefit it can bring to engineering networks will be discussed

Indicators for Universal Health Coverage: can Kenya comply with the proposed post-2015 monitoring recommendations?

Science.gov (United States)

Obare, Valerie; Brolan, Claire E; Hill, Peter S

2014-12-20

Universal Health Coverage (UHC), referring to access to healthcare without financial burden, has received renewed attention in global health spheres. UHC is a potential goal in the post-2015 development agenda. Monitoring of progress towards achieving UHC is thus critical at both country and global level, and a monitoring framework for UHC was proposed by a joint WHO/World Bank discussion paper in December 2013. The aim of this study was to determine the feasibility of the framework proposed by WHO/World Bank for global UHC monitoring framework in Kenya. The study utilised three documents--the joint WHO/World Bank UHC monitoring framework and its update, and the Bellagio meeting report sponsored by WHO and the Rockefeller Foundation--to conduct the research. These documents informed the list of potential indicators that were used to determine the feasibility of the framework. A purposive literature search was undertaken to identify key government policy documents and relevant scholarly articles. A desk review of the literature was undertaken to answer the research objectives of this study. Kenya has yet to establish an official policy on UHC that provides a clear mandate on the goals, targets and monitoring and evaluation of performance. However, a significant majority of Kenyans continue to have limited access to health services as well as limited financial risk protection. The country has the capacity to reasonably report on five out of the seven proposed UHC indicators. However, there was very limited capacity to report on the two service coverage indicators for the chronic condition and injuries (CCIs) interventions. Out of the potential tracer indicators (n = 27) for aggregate CCI-related measures, four tracer indicators were available. Moreover the country experiences some wider challenges that may impact on the implementation and feasibility of the WHO/World Bank framework. The proposed global framework for monitoring UHC will only be feasible in Kenya if

Financial Indicators of Reduced Impact Logging Performance in Brazil: Case Study Comparisons

Science.gov (United States)

Thomas P. Holmes; Frederick Boltz; Douglas R. Carter

2001-01-01

Indicators of financial performance are compared for three case studies in the Brazilian Amazon. Each case study presents parameters obtained from monitoring initial harvest entries into primary forests for reduced impact logging (RIL) and conventional logging (CL) operations. Differences in cost definitions and data collection protocols complicate the analysis, and...

Performance Indicators in Spine Surgery.

Science.gov (United States)

St-Pierre, Godefroy Hardy; Yang, Michael H; Bourget-Murray, Jonathan; Thomas, Ken C; Hurlbert, Robin John; Matthes, Nikolas

2018-02-15

Systematic review. To elucidate how performance indicators are currently used in spine surgery. The Patient Protection and Affordable Care Act has given significant traction to the idea that healthcare must provide value to the patient through the introduction of hospital value-based purchasing. The key to implementing this new paradigm is to measure this value notably through performance indicators. MEDLINE, CINAHL Plus, EMBASE, and Google Scholar were searched for studies reporting the use of performance indicators specific to spine surgery. We followed the Prisma-P methodology for a systematic review for entries from January 1980 to July 2016. All full text articles were then reviewed to identify any measure of performance published within the article. This measure was then examined as per the three criteria of established standard, exclusion/risk adjustment, and benchmarking to determine if it constituted a performance indicator. The initial search yielded 85 results among which two relevant studies were identified. The extended search gave a total of 865 citations across databases among which 15 new articles were identified. The grey literature search provided five additional reports which in turn led to six additional articles. A total of 27 full text articles and reports were retrieved and reviewed. We were unable to identify performance indicators. The articles presenting a measure of performance were organized based on how many criteria they lacked. We further examined the next steps to be taken to craft the first performance indicator in spine surgery. The science of performance measurement applied to spine surgery is still in its infancy. Current outcome metrics used in clinical settings require refinement to become performance indicators. Current registry work is providing the necessary foundation, but requires benchmarking to truly measure performance. 1.

Performance Management and Monitoring of Internal Audit for the Public Sector in Romania

Directory of Open Access Journals (Sweden)

Elena Doina Dascălu

2016-08-01

Full Text Available Performance management is an on-going process, which has an essential component part, performance measurement, which involves the identification, supervision and communication of performance results, through the relation to a set of performance indicators. Based on the assessment results, corrective measures are established to ensure attainment of targeted results, offering a feedback, essential for the decision grounding enhancement, at all levels: strategic, operational or individual. As concerns performance management in public institutions in Romania, The Code on managerial internal control provides a hierarchy type model, in the framework of which, the head of the public entity, which is on the first level, needs to provide for performance monitoring for each objective and activity, through the intermediary of relevant quantitative and qualitative indicators, including referring to economy, efficiency, and effectiveness. Given the importance of the internal audit in the process of performance management, identifying solutions for continuous improvement of the public internal audit was subject to a study that was based on questioning public sector auditors on how to monitor the performance of public internal audit activity. Considering issues arising, the article proposes a series of directions for improving the monitoring of the performance of public internal audit activity in the public sector.

SYSTEM OF PERFORMANCE INDICATORS FOR THE STUDENT CENTRED EDUCATION

Directory of Open Access Journals (Sweden)

Roșca Remus Dorel

2015-07-01

Full Text Available The higher education system in Romania is facing a number of challenges coming from its external and internal environment, challenges which threaten even its very own survival. The significant decrease in the number of high school graduates, the increasing disengagement of the new generations towards the idea of study, the marketing myopia that has characterised the university management act are just a few of the challenges that compel the responsible policymakers to adopt a new management philosophy, a philosophy which has as central point the student centred education paradigm (SCE. For operationalizing this philosophy in the current practice of Romanian universities, it is necessary to develop and use a system of performance indicators for the student-centred education (SPISCE. This system would have the purpose: to monitor the performances obtained in time by the higher education institution (HEI, allowing their comparison with those of other competing institutions; to allow the identification of areas where a significant improvement in SCE is needed; to facilitate the establishment of a client oriented marketing strategy within the institution; to create a favourable framework for promoting an organizational culture specific to SCE among teaching staff members and to redesign their rewards system, taking into account their performances in practicing the SCE. We will conceive the SPISCE starting from the process model, resulting three major categories: input-specific performance indicators, process-specific performance indicators and output-specific performance indicators. The academic year pass rate, the retention rate, the number of graduates who continue with master studies, lifetime value are just a few examples of such indicators. Measuring them will help the management team of a university to understand the supremacy of relational marketing compared to the transactional one, the importance of holding on to students and not just

Quantitative performance monitoring

International Nuclear Information System (INIS)

Heller, A.S.

1987-01-01

In the recently published update of NUREG/CR 3883, it was shown that Japanese plants of size and design similar to those in the US have significantly fewer trips in a given year of operation. One way to reduce such imbalance is the efficient use of available plant data. Since plant data are recorded and monitored continuously for management feedback and timely resolution of problems, this data should be actively used to increase the efficiency of operations and, ultimately, for a reduction of plant trips in power plants. A great deal of information is lost, however, if the analytical tools available for the data evaluation are misapplied or not adopted at all. This paper deals with a program developed to use quantitative techniques to monitor personnel performance in an operating power plant. Visual comparisons of ongoing performance with predetermined quantitative performance goals are made. A continuous feedback is provided to management for early detection of adverse trends and timely resolution of problems. Ultimately, costs are reduced through effective resource management and timely decision making

Detailed descriptions of overall performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-02-15

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety.

Detailed descriptions of overall performance indicators

International Nuclear Information System (INIS)

1988-02-01

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety

Performance indicators of work activity.

Science.gov (United States)

Lahoz, Manoela de Assis; Camarotto, João Alberto

2012-01-01

The measurement of performance is a current topic in the management of people in companies, used as a parameter of effectiveness of processes and operations of production. The methods and models of the indicators of current use in the production have concentrated in the assessment of people's performance as determinative resource of the organizational success in the search for the competitiveness. Associated with the classic indicators of performance assessment of the production proceeding, other indicators are used in the assessment of risks and hazards, however with methods focused in the tasks, without connection with the real work activity. The present article explores literature on the models of performance measurement in use in companies and a field research to understand how companies interpret and use indicators that relate health and work, to direct future studies on the subject. Regarding the literature review, one can see that health indicators can be basically divided into two major groups: the legal and managerial indicators. When conducting case studies, it can be realized that companies do not have precisely the concept of health indicator, or were unable to define which of the indicators could be considered indicators of health, considering that absenteeism was the indicator mentioned by the four companies.

Identifying the most significant indicators of the total road safety performance index.

Science.gov (United States)

Tešić, Milan; Hermans, Elke; Lipovac, Krsto; Pešić, Dalibor

2018-04-01

The review of the national and international literature dealing with the assessment of the road safety level has shown great efforts of the authors who tried to define the methodology for calculating the composite road safety index on a territory (region, state, etc.). The procedure for obtaining a road safety composite index of an area has been largely harmonized. The question that has not been fully resolved yet concerns the selection of indicators. There is a wide range of road safety indicators used to show a road safety situation on a territory. Road safety performance index (RSPI) obtained on the basis of a larger number of safety performance indicators (SPIs) enable decision makers to more precisely define the earlier goal- oriented actions. However, recording a broader comprehensive set of SPIs helps identify the strengths and weaknesses of a country's road safety system. Providing high quality national and international databases that would include comparable SPIs seems to be difficult since a larger number of countries dispose of a small number of identical indicators available for use. Therefore, there is a need for calculating a road safety performance index with a limited number of indicators (RSPI ln n ) which will provide a comparison of a sufficient quality, of as many countries as possible. The application of the Data Envelopment Analysis (DEA) method and correlative analysis has helped to check if the RSPI ln n is likely to be of sufficient quality. A strong correlation between the RSPI ln n and the RSPI has been identified using the proposed methodology. Based on this, the most contributing indicators and methodologies for gradual monitoring of SPIs, have been defined for each country analyzed. The indicator monitoring phases in the analyzed countries have been defined in the following way: Phase 1- the indicators relating to alcohol, speed and protective systems; Phase 2- the indicators relating to roads and Phase 3- the indicators relating to

What is the value of performance indicators for the nuclear industry?

International Nuclear Information System (INIS)

Johann Popp

2006-01-01

WANO is an Association of all Operators of Nuclear Power Plants worldwide. This association is promoting and running for their members 4 programmes which are Operating Experience, Peer Reviews, Professional and Technical Development and Technical Support and Exchange. The Technical Support and Exchange programme comprises Good Practices, Performance Indicators, Operator-to-Operator Exchanges and Technical Support Missions. This paper explains the Performance Indicator programme. WANO is collecting significant NPP nuclear power plant data and is computing indicators according to selected criteria for the only purpose of comparing or benchmarking plant performance of all types and different designs. All effective organisations measure their performance in order to know, how well they are doing and in order to identify opportunities for improvement. Indicators are central to the monitoring and reporting of progress towards sustainable development in all areas. Indicators are mainly derived from statistical data in order to exhibit weaknesses and strengths of programs. There are many hundreds of commercial and technical indicators known. WANO is tracing just ten significant indicators out of the many available, and only for the purpose of comparing plant performance. The first set of three indicators is more related to productivity and exhibit, how well management is planning, staff is maintaining and operators are conducting the plants. The second set of two indicators is related to safety systems, how well they are maintained and how reliable they are. The next set of two is material related and the last two indicators are related to human resources. Indicators are reflecting the current industrial standard and allow the positioning of a plant with regard to the 'state of the art'. They pinpoint to weaknesses and strengths of different designs/fleets

[Study on the optimization of monitoring indicators of drinking water quality during health supervision].

Science.gov (United States)

Ye, Bixiong; E, Xueli; Zhang, Lan

2015-01-01

To optimize non-regular drinking water quality indices (except Giardia and Cryptosporidium) of urban drinking water. Several methods including drinking water quality exceed the standard, the risk of exceeding standard, the frequency of detecting concentrations below the detection limit, water quality comprehensive index evaluation method, and attribute reduction algorithm of rough set theory were applied, redundancy factor of water quality indicators were eliminated, control factors that play a leading role in drinking water safety were found. Optimization results showed in 62 unconventional water quality monitoring indicators of urban drinking water, 42 water quality indicators could be optimized reduction by comprehensively evaluation combined with attribute reduction of rough set. Optimization of the water quality monitoring indicators and reduction of monitoring indicators and monitoring frequency could ensure the safety of drinking water quality while lowering monitoring costs and reducing monitoring pressure of the sanitation supervision departments.

Analysis of corrective action data from trial program on programmatic performance indicators

International Nuclear Information System (INIS)

Mays, G.T.; Poore, W.P.

1989-01-01

The Nuclear Regulatory Commission (NRC) is considering the use of cause codes as performance indicators (PIs) to monitor licensee performance. In conjunction with the cause codes, corrective action codes are also under consideration to describe licensee corrective actions for problems as represented by the cause codes. The set of cause codes and corrective actions employed in a trial program to assess their usefulness included: (1) administrative error -- training; (2) design/installation -- procedure modification; (3) fabrication error -- discipline; (4) random equipment failure -- management change; (5) licensed operator error -- design modification; and (6) other personal error -- equipment replacement/adjustment. These causes were selected to represent a broad range of licensee programs, hence the designation of programmatic PIs, that could be monitored in a systematic manner to identify trends in performance. They should establish a basis and focus for further investigation of a particular programmatic area if undesirable trends are evidence. 2 figs

Thermal performance monitoring and assessment in Dukovany nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Madron, F. [Chemplant Technology s.r.o., Hrncirska 4, 400 01 Usti nad Labem (Czech Republic); Papuga, J. [CEZ a.s., JE Dukovany, 675 50 Dukovany (Czech Republic); Pliska, J. [I and C ENERGO a.s., Prazska 684, 674 01 Trebic (Czech Republic)

2006-07-01

Competition in the European electricity market forces generators to achieve - in compliance with safety and environmental standards - efficiency of production as high as possible. This efficiency or heat rate is an important indicator of both the condition of the plant equipment and the quality of plant operation. Similar thermal performance indicators can also be calculated for components of the plant equipment such as heat exchangers. However, it is not easy to quantify these indicators with sufficient precision so that the results can be used for conduct of plant operation in near-real time and for predictive maintenance. This paper describes a present state of the system monitoring and evaluating thermal performance of the reactor units in Dukovany Nuclear Power Plant. The system provides information on actual and desirable (should-be) values of thermal performance indicators for control room operators, performance engineers and maintenance planners. The system is designed to monitor steady states and has two main functions: data validation and process simulation. Data validation is based on data reconciliation methodology and carried out with Recon software by Chemplant Technology. A detailed model of the secondary side for mass and heat balancing has been made up by means of the Recon's graphical editor; now it contains roughly 300 flows and employs data of about 200 measurements. Main advantages of the data reconciliation are: - reconciled data are consistent with the model, - reconciled data are more precise than data directly measured with consequence that the thermal power of steam generators is determined with substantially lower uncertainty than before - data reconciliation represents a solid basis for detection and identification of data corrupted by gross errors. Simulation is performed with a different analytical model of plant components configured into secondary side. The model has been developed by I and C Energo. Main purposes of simulation

Linking indices for biodiversity monitoring to extinction risk theory.

Science.gov (United States)

McCarthy, Michael A; Moore, Alana L; Krauss, Jochen; Morgan, John W; Clements, Christopher F

2014-12-01

Biodiversity indices often combine data from different species when used in monitoring programs. Heuristic properties can suggest preferred indices, but we lack objective ways to discriminate between indices with similar heuristics. Biodiversity indices can be evaluated by determining how well they reflect management objectives that a monitoring program aims to support. For example, the Convention on Biological Diversity requires reporting about extinction rates, so simple indices that reflect extinction risk would be valuable. We developed 3 biodiversity indices that are based on simple models of population viability that relate extinction risk to abundance. We based the first index on the geometric mean abundance of species and the second on a more general power mean. In a third index, we integrated the geometric mean abundance and trend. These indices require the same data as previous indices, but they also relate directly to extinction risk. Field data for butterflies and woodland plants and experimental studies of protozoan communities show that the indices correlate with local extinction rates. Applying the index based on the geometric mean to global data on changes in avian abundance suggested that the average extinction probability of birds has increased approximately 1% from 1970 to 2009. © 2014 The Authors. Conservation Biology published by Wiley Periodicals, Inc., on behalf of the Society for Conservation Biology.

Fishery Performance Indicators

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Performance indicators for landings, effort, revenue and distribution of revenue are collected for various fisheries nation-wide. The fisheries include catch and...

On-Line Monitoring of Instrument Channel Performance in Nuclear Power Plant Using PEANO

International Nuclear Information System (INIS)

Fantoni, Paolo F.; Hoffmann, Mario; Shankar, Ramesh; Davis, Eddie L.

2002-01-01

On-Line monitoring evaluates instrument channel performance by assessing its consistency with other plant indications. Industry and EPRI experience at several plants has shown this overall approach to be very effective in identifying instrument channels that are exhibiting degrading or inconsistent performance characteristics. On-Line monitoring of instrument channels provides information about the condition of the monitored channels through accurate, more frequent monitoring of each channel's performance over time. This type of performance monitoring is a methodology that offers an alternate approach to traditional time-directed calibration. On-line monitoring of these channels can provide an assessment of instrument performance and provide a basis for determining when adjustments are necessary. Elimination or reduction of unnecessary field calibrations can reduce associated labor costs, reduce personnel radiation exposure and reduce the potential for miss-calibration. PEANO is a system for on-line calibration monitoring developed in the years 1995-2000 at the Institutt for energiteknikk (IFE), Norway, which makes use of Artificial Intelligence techniques for its purpose. The system has been tested successfully in Europe in off-line tests with EDF (France), Tecnatom (Spain) and ENEA (Italy). PEANO is currently installed and used for on-line monitoring at the HBWR reactor in Halden. This paper describes the results of performance tests on PEANO with real data from a US PWR plant, in the framework of a co-operation among IFE, EPRI and Edan Engineering, to evaluate the potentials of PEANO for future installations in US nuclear plants. (authors)

Shared performance monitor in a multiprocessor system

Science.gov (United States)

Chiu, George; Gara, Alan G.; Salapura, Valentina

2012-07-24

A performance monitoring unit (PMU) and method for monitoring performance of events occurring in a multiprocessor system. The multiprocessor system comprises a plurality of processor devices units, each processor device for generating signals representing occurrences of events in the processor device, and, a single shared counter resource for performance monitoring. The performance monitor unit is shared by all processor cores in the multiprocessor system. The PMU comprises: a plurality of performance counters each for counting signals representing occurrences of events from one or more the plurality of processor units in the multiprocessor system; and, a plurality of input devices for receiving the event signals from one or more processor devices of the plurality of processor units, the plurality of input devices programmable to select event signals for receipt by one or more of the plurality of performance counters for counting, wherein the PMU is shared between multiple processing units, or within a group of processors in the multiprocessing system. The PMU is further programmed to monitor event signals issued from non-processor devices.

Three novel obese indicators perform better in monitoring management of metabolic syndrome in type 2 diabetes.

Science.gov (United States)

Ma, Chun-Ming; Lu, Na; Wang, Rui; Liu, Xiao-Li; Lu, Qiang; Yin, Fu-Zai

2017-08-29

The present study evaluated the performance of three novel obese indicators, visceral adiposity index (VAI), lipid accumulation product (LAP) and waist circumference-triglyceride index (WTI), for identifying metabolic syndrome(MetS) in type 2 diabetes. A cross-sectional study was conducted on 711 type 2 diabetes in Qinhuangdao. The MetS was defined as the definition of Chinese Diabetes Society. Receiver operating characteristic curve analyses were performed to assess the accuracy of three obese indicators as diagnostic tests for MetS. The prevalence of MetS was 71.3%. In men, among all three obese indicators, the LAP had the highest area under curve (AUC) value (AUC = 0.894), followed by VAI (AUC = 0.860) and WTI (AUC = 0.855). In women, among all three obese indicators, the LAP had the highest AUC value (AUC = 0.906), followed by WTI (AUC = 0.887) and VAI (AUC = 0.881). However. there was no significant difference between the three obese indicators(P > 0.05). Three obese indicators were effective indicators for the screening of MetS, LAP and WTI are more simple.

Real-time performance monitoring and management system

Science.gov (United States)

Budhraja, Vikram S [Los Angeles, CA; Dyer, James D [La Mirada, CA; Martinez Morales, Carlos A [Upland, CA

2007-06-19

A real-time performance monitoring system for monitoring an electric power grid. The electric power grid has a plurality of grid portions, each grid portion corresponding to one of a plurality of control areas. The real-time performance monitoring system includes a monitor computer for monitoring at least one of reliability metrics, generation metrics, transmission metrics, suppliers metrics, grid infrastructure security metrics, and markets metrics for the electric power grid. The data for metrics being monitored by the monitor computer are stored in a data base, and a visualization of the metrics is displayed on at least one display computer having a monitor. The at least one display computer in one said control area enables an operator to monitor the grid portion corresponding to a different said control area.

Indicators for monitoring screening programs with primary HPV test.

Science.gov (United States)

Zorzi, Manuel; Giorgi Rossi, Paolo

2017-01-01

following scientific evidence produced in numerous studies, as well as national and international guidelines, organized cervical cancer screening programs in Italy have gradually introduced the HPV test as primary screening test, replacing cytology. As public health interventions, screening programs must ensure equity, improvement in quality of life, and adequate information for the population involved with regards to benefits and possible risks; therefore, it is essential for quality to be constantly checked at every phase of the project.The Italian Cervical Screening Group (Gruppo Italiano per lo Screening Cervicale, GISCi) has written a handbook for the calculation and interpretation of cervical screening program monitoring indicators that take into account the new protocol based on primary HPV test with cytology triage. based on the European guidelines and Italian recommendations on primary HPVbased screening, the working group, which includes professionals from all the fields involved in cervical screening, identified the essential points needed to monitor the screening process, the accuracy of individual tests, and early outcomes, defining a specific indicator for each aspect. The indicators were grouped as follows: baseline indicators, indicators for test repeat after one year, cumulative indicators, and waiting times. For every indicator, the source of data, calculation formula, any standards or critical thresholds, and interpretation were defined. The standards are based on the results of NTCC trials or Italian pilot studies. the main indicators proposed for the organization are the following: number of invitations, compliance with first invitation, with one-year test repeat and with colposcopy; for test and process accuracy, a cohort approach was utilised, where indicators are based on women who must be followed for at least one year, so as to integrate the results obtained after the first HPV test with the outcome of the test's repetition after one year

Retrospective Analysis of Indication of Bone Scintigraphy Performed in Our Clinic

Directory of Open Access Journals (Sweden)

Fusun Aydogan

2014-03-01

Full Text Available Aim: Bone scintigraphy is one of the commonly used radionuclide imaging and it is successfully used in the diagnosis and follow-up of many diseases. The aim of this study is to determine the indications and filming protocols of bone scintigraphy which was performed in our clinic. Material and Method: Two hundred and fifty two patients (132 male, 120 female who was performed bone scintigprapy in our clinic between December 2011 and June 2013 included the study. Mean age was 50.1±20.2 years. Scintigraphic protocols were made in two ways as late static whole body imaging and three-phase bone scintigraphy according to the type of the diseases. Indications of scintigraphies and scintigraphic protocols were detected. Results: Bone scintigraphy was performed for diagnosis and monitoring of metastatic bone disease to 102 patients (40,5 %, for orthopedic applications to 57 patients (22,6 %, for diagnosis and monitoring of primary bone tumors to 29 patients (11,5 %, for diagnosis of osteomyelitis to 17 patients (6,7 %, for differential diagnosis of infection and loosening of the prosthesis to 12 patients (4,8 %, investigate the viability of the graft in 14 patients (4,6 %, for rheumatologic diseases to 9 patients (3,6 %, for investigate the pathological vertebral fractures and osteoporosis to 4 patients (1,6 %, for diagnosis the metabolic bone disease to 2 patients (0,8 %, for diagnosis of otitis externa to 5 patients (1,98 % and for for suspicion of malignancy to 1 patient (0,4 %. Late static whole body imaging protocol was applied to 136 patients (54 % and three-phase imaging protocol was applied to 116 patients (46 %. Discussion: The most common use of bone scintigraphy is the diagnosis and follow-up of metastatic bone disease. It is followed by reasons such as orthopedic applications, monitoring and diagnosis of primary bone tumors and diagnosis of osteomyelitis.

Performance monitoring and error significance in patients with obsessive-compulsive disorder.

Science.gov (United States)

Endrass, Tanja; Schuermann, Beate; Kaufmann, Christan; Spielberg, Rüdiger; Kniesche, Rainer; Kathmann, Norbert

2010-05-01

Performance monitoring has been consistently found to be overactive in obsessive-compulsive disorder (OCD). The present study examines whether performance monitoring in OCD is adjusted with error significance. Therefore, errors in a flanker task were followed by neutral (standard condition) or punishment feedbacks (punishment condition). In the standard condition patients had significantly larger error-related negativity (ERN) and correct-related negativity (CRN) ampliudes than controls. But, in the punishment condition groups did not differ in ERN and CRN amplitudes. While healthy controls showed an amplitude enhancement between standard and punishment condition, OCD patients showed no variation. In contrast, group differences were not found for the error positivity (Pe): both groups had larger Pe amplitudes in the punishment condition. Results confirm earlier findings of overactive error monitoring in OCD. The absence of a variation with error significance might indicate that OCD patients are unable to down-regulate their monitoring activity according to external requirements. Copyright 2010 Elsevier B.V. All rights reserved.

Performance indicators and decision making for outsourcing public health laboratory services.

Science.gov (United States)

Santos, Maria Angelica Borges dos; Moraes, Ricardo Montes de; Passos, Sonia Regina Lambert

2012-06-01

To develop performance indicators for outsourcing clinical laboratory services, based on information systems and public administrative records. In the municipality of Rio de Janeiro, Southern Brazil, the public health laboratory network comprised 33 laboratories with automated equipment (but no integrated information system), 90 primary care units (where sample collection was performed) and 983 employees. Information records were obtained from the administrative records of the Budget Information System for Public Health and the Outpatient and Hospital Information System of the Unified Health System. Performance indicators (production, productivity, usage and costs) were generated from data collected routinely from 2006 to 2008. The variations in production, costs and unit prices for tests were analyzed by Laspeyres and Paasche indices, which specifically measure laboratory activity, and by the Consumer Price Index from the Brazilian Institute of Geography and Statistics. A total of 10,359,111 tests were performed in 2008 (10.6% increase over 2006), and the test/employee ratio grew by 8.6%. The costs of supplies, wages and providers increased by 2.3%, 45.4% and 18.3%, respectively. The laboratory tests per visit and hospitalizations increased by 10% and 20%, respectively. The direct costs totaled R$ 63.2 million in 2008, representing an increase of 22.2% in current values during the period analyzed. The direct costs deflated by the Brazilian National Consumer Price Index (9.5% for the period) showed an 11.6% increase in production volumes. The activity-specific volume index, which considers changes in the mix of tests, showed increases of 18.5% in the test price and 3.1% in the production volume. The performance indicators, particularly the specific indices for volume and price of activity, constitute a baseline of performance potential for monitoring private laboratories and contractors. The economic performance indicators demonstrated the need for network

On the Potential of Surfers to Monitor Environmental Indicators in the Coastal Zone.

Science.gov (United States)

Brewin, Robert J W; de Mora, Lee; Jackson, Thomas; Brewin, Thomas G; Shutler, Jamie

2015-01-01

The social and economic benefits of the coastal zone make it one of the most treasured environments on our planet. Yet it is vulnerable to increasing anthropogenic pressure and climate change. Coastal management aims to mitigate these pressures while augmenting the socio-economic benefits the coastal region has to offer. However, coastal management is challenged by inadequate sampling of key environmental indicators, partly due to issues relating to cost of data collection. Here, we investigate the use of recreational surfers as platforms to improve sampling coverage of environmental indicators in the coastal zone. We equipped a recreational surfer, based in the south west United Kingdom (UK), with a temperature sensor and Global Positioning System (GPS) device that they used when surfing for a period of one year (85 surfing sessions). The temperature sensor was used to derive estimates of sea-surface temperature (SST), an important environmental indicator, and the GPS device used to provide sample location and to extract information on surfer performance. SST data acquired by the surfer were compared with data from an oceanographic station in the south west UK and with satellite observations. Our results demonstrate: (i) high-quality SST data can be acquired by surfers using low cost sensors; and (ii) GPS data can provide information on surfing performance that may help motivate data collection by surfers. Using recent estimates of the UK surfing population, and frequency of surfer participation, we speculate around 40 million measurements on environmental indicators per year could be acquired at the UK coastline by surfers. This quantity of data is likely to enhance coastal monitoring and aid UK coastal management. Considering surfing is a world-wide sport, our results have global implications and the approach could be expanded to other popular marine recreational activities for coastal monitoring of environmental indicators.

On the Potential of Surfers to Monitor Environmental Indicators in the Coastal Zone.

Directory of Open Access Journals (Sweden)

Robert J W Brewin

Full Text Available The social and economic benefits of the coastal zone make it one of the most treasured environments on our planet. Yet it is vulnerable to increasing anthropogenic pressure and climate change. Coastal management aims to mitigate these pressures while augmenting the socio-economic benefits the coastal region has to offer. However, coastal management is challenged by inadequate sampling of key environmental indicators, partly due to issues relating to cost of data collection. Here, we investigate the use of recreational surfers as platforms to improve sampling coverage of environmental indicators in the coastal zone. We equipped a recreational surfer, based in the south west United Kingdom (UK, with a temperature sensor and Global Positioning System (GPS device that they used when surfing for a period of one year (85 surfing sessions. The temperature sensor was used to derive estimates of sea-surface temperature (SST, an important environmental indicator, and the GPS device used to provide sample location and to extract information on surfer performance. SST data acquired by the surfer were compared with data from an oceanographic station in the south west UK and with satellite observations. Our results demonstrate: (i high-quality SST data can be acquired by surfers using low cost sensors; and (ii GPS data can provide information on surfing performance that may help motivate data collection by surfers. Using recent estimates of the UK surfing population, and frequency of surfer participation, we speculate around 40 million measurements on environmental indicators per year could be acquired at the UK coastline by surfers. This quantity of data is likely to enhance coastal monitoring and aid UK coastal management. Considering surfing is a world-wide sport, our results have global implications and the approach could be expanded to other popular marine recreational activities for coastal monitoring of environmental indicators.

Efficacy of extracting indices from large-scale acoustic recordings to monitor biodiversity.

Science.gov (United States)

Buxton, Rachel; McKenna, Megan F; Clapp, Mary; Meyer, Erik; Stabenau, Erik; Angeloni, Lisa M; Crooks, Kevin; Wittemyer, George

2018-04-20

Passive acoustic monitoring has the potential to be a powerful approach for assessing biodiversity across large spatial and temporal scales. However, extracting meaningful information from recordings can be prohibitively time consuming. Acoustic indices offer a relatively rapid method for processing acoustic data and are increasingly used to characterize biological communities. We examine the ability of acoustic indices to predict the diversity and abundance of biological sounds within recordings. First we reviewed the acoustic index literature and found that over 60 indices have been applied to a range of objectives with varying success. We then implemented a subset of the most successful indices on acoustic data collected at 43 sites in temperate terrestrial and tropical marine habitats across the continental U.S., developing a predictive model of the diversity of animal sounds observed in recordings. For terrestrial recordings, random forest models using a suite of acoustic indices as covariates predicted Shannon diversity, richness, and total number of biological sounds with high accuracy (R 2 > = 0.94, mean squared error MSE indices assessed, roughness, acoustic activity, and acoustic richness contributed most to the predictive ability of models. Performance of index models was negatively impacted by insect, weather, and anthropogenic sounds. For marine recordings, random forest models predicted Shannon diversity, richness, and total number of biological sounds with low accuracy (R 2 = 195), indicating that alternative methods are necessary in marine habitats. Our results suggest that using a combination of relevant indices in a flexible model can accurately predict the diversity of biological sounds in temperate terrestrial acoustic recordings. Thus, acoustic approaches could be an important contribution to biodiversity monitoring in some habitats in the face of accelerating human-caused ecological change. This article is protected by copyright. All rights

Research Note Identifying key grazing indicators to monitor trends in ...

African Journals Online (AJOL)

Research Note Identifying key grazing indicators to monitor trends in the veld condition of Lambert's Bay Strandveld, South Africa. ... from which a minimum number of species necessary to monitor trends in the condition of the veld were determined, making it user-friendly for land-users, extension officers and others. The key ...

Facilities Performance Indicators Report, 2008-09

Science.gov (United States)

Hills, Christina, Ed.

2010-01-01

This paper features another expanded Web-based Facilities Performance Indicators Report (FPI). The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. The 2008-09 iteration of the Web-based Facilities Performance Indicators Survey was posted and…

The european primary care monitor: structure, process and outcome indicators

Directory of Open Access Journals (Sweden)

Wilson Andrew

2010-10-01

Full Text Available Abstract Background Scientific research has provided evidence on benefits of well developed primary care systems. The relevance of some of this research for the European situation is limited. There is currently a lack of up to date comprehensive and comparable information on variation in development of primary care, and a lack of knowledge of structures and strategies conducive to strengthening primary care in Europe. The EC funded project Primary Health Care Activity Monitor for Europe (PHAMEU aims to fill this gap by developing a Primary Care Monitoring System (PC Monitor for application in 31 European countries. This article describes the development of the indicators of the PC Monitor, which will make it possible to create an alternative model for holistic analyses of primary care. Methods A systematic review of the primary care literature published between 2003 and July 2008 was carried out. This resulted in an overview of: (1 the dimensions of primary care and their relevance to outcomes at (primary health system level; (2 essential features per dimension; (3 applied indicators to measure the features of primary care dimensions. The indicators were evaluated by the project team against criteria of relevance, precision, flexibility, and discriminating power. The resulting indicator set was evaluated on its suitability for Europe-wide comparison of primary care systems by a panel of primary care experts from various European countries (representing a variety of primary care systems. Results The developed PC Monitor approaches primary care in Europe as a multidimensional concept. It describes the key dimensions of primary care systems at three levels: structure, process, and outcome level. On structure level, it includes indicators for governance, economic conditions, and workforce development. On process level, indicators describe access, comprehensiveness, continuity, and coordination of primary care services. On outcome level, indicators

Developing human rights based indicators to support country monitoring of rehabilitation services and programmes for people with disabilities: a study protocol.

Science.gov (United States)

Skempes, Dimitrios; Bickenbach, Jerome

2015-09-24

Rehabilitation care is fundamental to health and human dignity and a human right enshrined in the United Nations Convention on the Rights of Persons with Disabilities. The provision of rehabilitation is important for reducing the need for formal support and enabling persons with disabilities to lead an independent life. Increasingly scholars and advocacy groups voice concerns over the significant barriers facing people with disabilities in accessing appropriate and quality rehabilitation. A growing body of research highlights a "respond-need" gap in the provision of rehabilitation and assistive technologies and underscore the lack of indicators for assessing performance of rehabilitation systems and monitoring States compliance with human rights standards in rehabilitation service planning and programming. While research on human rights and health monitoring has increased exponentially over the last decade far too little attention has been paid to rehabilitation services. The proposed research aims to reduce this knowledge gap by developing a human rights based monitoring framework with indicators to support human rights accountability and performance assessment in rehabilitation. Concept mapping, a stakeholder-driven approach will be used as the core method to identify rights based indicators and develop the rehabilitation services monitoring framework. Concept mapping requires participants from various stakeholders groups to generate a list of the potential indicators through on line brainstorming, sort the indicators for conceptual similarity into clusters and rate them against predefined criteria. Multidimensional scaling and hierarchical cluster data analysis will be performed to develop the monitoring framework while bridging analysis will provide useful insights about patterns of agreement or disagreement among participants views on indicators. This study has the potential to influence future practices on data collection and measurement of compliance with

Indicators measuring the performance of malaria programs supported by the global fund in Asia, progress and the way forward.

Directory of Open Access Journals (Sweden)

Jinkou Zhao

Full Text Available INTRODUCTION: In 2010, the Global Fund provided more than 75% of external international financing for malaria control. The Global Fund uses performance based funding in the grants it finances. This paper analyses the indicators used to measure the performance of Global Fund supported malaria grants in Asia. METHODS: Indicators used in the performance frameworks for all Global Fund supported malaria grants in Asia were retrieved from grant database and grouped into impact, outcome, output and input categories and categorized by service delivery areas. Indicators of each group were compared over rounds. Indicators used in performance frameworks were compared with internationally adopted indicators included in the Monitoring and Evaluation Toolkit developed by the Global Fund and international technical agencies. RESULTS: Between 2002 and 2010, 1,434 indicators were included in the performance frameworks of the 48 malaria grants awarded in Asia, including 229 impact and 227 outcome indicators, 437 output and 541 input indicators, with an average of 29.9 indicators per grant. The proportion of impact and outcome indicators increased over rounds, with that of input indicators declining from 44.1% in Round 1 to 22.7% in Round 9. CONCLUSIONS: Input indicators, which have predominated the performance frameworks of the Global Fund supported malaria programs in Asia have declined between Rounds 1 and 9. However, increased alignment with internationally adopted indicators included in the Monitoring and Evaluation Toolkit is needed to improve the validity of reported results.

Modular Software Performance Monitoring

CERN Document Server

Kruse, D F

2011-01-01

CPU clock frequency is not likely to be increased significantly in the coming years, and data analysis speed can be improved by using more processors or buying new machines, only if one is willing to change the paradigm to a parallel one. Therefore, performance monitoring procedures and tools are needed to help programmers to optimize existing software running on current and future hardware. Low level information from hardware performance counters is vital to spot specific performance problems slowing program execution. HEP software is often huge and complex, and existing tools are unable to give results with the required granularity. We will report on the approach we have chose to solve this problem that involves decomposing the application into parts and monitoring each of them separately. Both counting and sampling methods are used to allow an analysis with the required custom granularity: from global level, up to the function level. A set of tools (based on perfmon2 – a software interface to hardware co...

Competency Assessment Using Key Performance Indicators

OpenAIRE

Elena Alexandra Toader; Laura Brad

2015-01-01

The paper proposes a method for computing the scores of the key performance indicators resulted in the competency assessment process. The key performance indicators are estimated considering four performance levels that an IT professional can obtain at the end of the assessment process. We suggest as the best approach for estimating the performance key indicators an online questionnaire filled by 60 employees that work in IT Romanian companies. The results provide evidence that the difference...

A Mountain-Scale Monitoring Network for Yucca Mountain Performance Confirmation

International Nuclear Information System (INIS)

Freifeld, Barry; Tsang, Yvonne

2006-01-01

Confirmation of the performance of Yucca Mountain is required by 10 CFR Part 63.131 to indicate, where practicable, that the natural system acts as a barrier, as intended. Hence, performance confirmation monitoring and testing would provide data for continued assessment during the pre-closure period. In general, to carry out testing at a relevant scale is always important, and in the case of performance confirmation, it is particularly important to be able to test at the scale of the repository. We view the large perturbation caused by construction of the repository at Yucca Mountain as a unique opportunity to study the large-scale behavior of the natural barrier system. Repository construction would necessarily introduce traced fluids and result in the creation of leachates. A program to monitor traced fluids and construction leachates permits evaluation of transport through the unsaturated zone and potentially downgradient through the saturated zone. A robust sampling and monitoring network for continuous measurement of important parameters, and for periodic collection of agrochemical samples, is proposed to observe thermo-hydrogeochemical changes near the repository horizon and down to the water table. The sampling and monitoring network can be used to provide data to (1) assess subsurface conditions encountered and changes in those conditions during construction and waste emplacement operations; and (2) for modeling to determine that the natural system is functioning as intended

Physical soil quality indicators for monitoring British soils

Science.gov (United States)

Corstanje, Ron; Mercer, Theresa G.; Rickson, Jane R.; Deeks, Lynda K.; Newell-Price, Paul; Holman, Ian; Kechavarsi, Cedric; Waine, Toby W.

2017-09-01

Soil condition or quality determines its ability to deliver a range of functions that support ecosystem services, human health and wellbeing. The increasing policy imperative to implement successful soil monitoring programmes has resulted in the demand for reliable soil quality indicators (SQIs) for physical, biological and chemical soil properties. The selection of these indicators needs to ensure that they are sensitive and responsive to pressure and change, e.g. they change across space and time in relation to natural perturbations and land management practices. Using a logical sieve approach based on key policy-related soil functions, this research assessed whether physical soil properties can be used to indicate the quality of British soils in terms of their capacity to deliver ecosystem goods and services. The resultant prioritised list of physical SQIs was tested for robustness, spatial and temporal variability, and expected rate of change using statistical analysis and modelling. Seven SQIs were prioritised: soil packing density, soil water retention characteristics, aggregate stability, rate of soil erosion, depth of soil, soil structure (assessed by visual soil evaluation) and soil sealing. These all have direct relevance to current and likely future soil and environmental policy and are appropriate for implementation in soil monitoring programmes.

Physical soil quality indicators for monitoring British soils

Directory of Open Access Journals (Sweden)

R. Corstanje

2017-09-01

Full Text Available Soil condition or quality determines its ability to deliver a range of functions that support ecosystem services, human health and wellbeing. The increasing policy imperative to implement successful soil monitoring programmes has resulted in the demand for reliable soil quality indicators (SQIs for physical, biological and chemical soil properties. The selection of these indicators needs to ensure that they are sensitive and responsive to pressure and change, e.g. they change across space and time in relation to natural perturbations and land management practices. Using a logical sieve approach based on key policy-related soil functions, this research assessed whether physical soil properties can be used to indicate the quality of British soils in terms of their capacity to deliver ecosystem goods and services. The resultant prioritised list of physical SQIs was tested for robustness, spatial and temporal variability, and expected rate of change using statistical analysis and modelling. Seven SQIs were prioritised: soil packing density, soil water retention characteristics, aggregate stability, rate of soil erosion, depth of soil, soil structure (assessed by visual soil evaluation and soil sealing. These all have direct relevance to current and likely future soil and environmental policy and are appropriate for implementation in soil monitoring programmes.

WiMAX network performance monitoring & optimization

DEFF Research Database (Denmark)

Zhang, Qi; Dam, H

2008-01-01

frequency reuse, capacity planning, proper network dimensioning, multi-class data services and so on. Furthermore, as a small operator we also want to reduce the demand for sophisticated technicians and man labour hours. To meet these critical demands, we design a generic integrated network performance......In this paper we present our WiMAX (worldwide interoperability for microwave access) network performance monitoring and optimization solution. As a new and small WiMAX network operator, there are many demanding issues that we have to deal with, such as limited available frequency resource, tight...... this integrated network performance monitoring and optimization system in our WiMAX networks. This integrated monitoring and optimization system has such good flexibility and scalability that individual function component can be used by other operators with special needs and more advanced function components can...

Spectral Indices to Monitor Nitrogen-Driven Carbon Uptake in Field Corn

Science.gov (United States)

Corp, Lawrence A.; Middleton, Elizabeth M.; Campbell, Peya E.; Huemmrich, K. Fred; Daughtry, Craig S. T.; Russ, Andrew; Cheng, Yen-Ben

2010-01-01

Climate change is heavily impacted by changing vegetation cover and productivity with large scale monitoring of vegetation only possible with remote sensing techniques. The goal of this effort was to evaluate existing reflectance (R) spectroscopic methods for determining vegetation parameters related to photosynthetic function and carbon (C) dynamics in plants. Since nitrogen (N) is a key constituent of photosynthetic pigments and C fixing enzymes, biological C sequestration is regulated in part by N availability. Spectral R information was obtained from field corn grown at four N application rates (0, 70, 140, 280 kg N/ha). A hierarchy of spectral observations were obtained: leaf and canopy with a spectral radiometer; aircraft with the AISA sensor; and satellite with EO-1 Hyperion. A number of spectral R indices were calculated from these hyperspectral observations and compared to geo-located biophysical measures of plant growth and physiological condition. Top performing indices included the R derivative index D730/D705 and the normalized difference of R750 vs. R705 (ND705), both of which differentiated three of the four N fertilization rates at multiple observation levels and yielded high correlations to these carbon parameters: light use efficiency (LUE); C:N ratio; and crop grain yield. These results advocate the use of hyperspectral sensors for remotely monitoring carbon cycle dynamics in managed terrestrial ecosystems.

Summary report on the use of plant safety performance indicators

International Nuclear Information System (INIS)

2001-09-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. In parallel, a joint CNRA/CSNI group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's) and these are the ones that this report deals with. This report presents the work performed by the joint CNRA/CSNI task group mentioned above. It provides a summary of the sets of PI's being used by different regulatory bodies and WANO, it describes the national practices on the use of PI's and proposes a set of PI's that could be used nationally describing regulatory effectiveness and also as a basis for an international system. The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001. Each participant provided a brief description of the PI System at his organisation and its usage. The group identified a list of PI's that are recommended to be used nationally by regulators. This paper has been elaborated based on the information exchanged and discussions held in the February meeting. The participating countries (Spain, Finland, US, Sweden) and WANO were asked to provide an overview of systems in use. The presently used Performance Indicators were reviewed in a three steps process. 1. First indicators used in at least two agencies were identified. 2. The second step was to identify the most used indicators. 3. The third step was to

Project management metrics, KPIs, and dashboards a guide to measuring and monitoring project performance

CERN Document Server

Kerzner, Harold

2013-01-01

Today, with the growth of complex projects, stakeholder involvement in projects, advances in computer technology for dashboard designs, metrics, and key performance indicators for project management have become an important focus. This Second Edition of the bestselling book walks readers through everything from the basics of project management metrics and key performance indicators to establishing targets and using dashboards to monitor performance. The content is aligned with PMI's PMBOK Guide and stresses "value" as the main focal point.

Indicators of Ceriodaphnia dubia chronic toxicity test performance and sensitivity

Energy Technology Data Exchange (ETDEWEB)

Rosebrock, M.M.; Bedwell, N.J.; Ausley, L.W. [North Carolina Division of Environmental Management, Raleigh, NC (United States)

1994-12-31

The North Carolina Division of Environmental Management has begun evaluation of the sensitivity of test results used for measuring chronic whole effluent toxicity in North Carolina wastewater discharges. Approximately 67% of 565 facilities required to monitor toxicity by an NPDES permit perform a Ceriodaphnia dubia chronic, single effluent concentration (pass/fail) analysis. Data from valid Ceriodaphnia dubia chronic pass/fail tests performed by approximately 20 certified biological laboratories and submitted by North Carolina NPDES permittees were recorded beginning January 1992. Control and treatment reproduction data from over 2,500 tests submitted since 1992 were analyzed to determine the minimum significant difference (MSD) at a 99% confidence level for each test and the percent reduction from the control mean that the MSD represents (%MSD) for each certified laboratory. Initial results for the 20 laboratories indicate that the average intralaboratory percent MSD ranges 12.72% (n = 367) to 34.91% (n = 7) with an average of 23.08%. Additionally, over 3,800 tests were analyzed to determine the coefficient of variation (CV) for control reproduction for each test and the average for each certified biological laboratory. Preliminary review indicates that average interlaboratory control reproduction CV values range from 10.59% (n = 367) to 31.08% (n = 572) with a mean of 20.35%. The statistics investigated are indicators of intra/interlaboratory performance and sensitivity of Ceriodaphnia chronic toxicity analyses.

Profit indicators in performance systems in the Czech companies

Directory of Open Access Journals (Sweden)

Jana Hornungová

2013-01-01

Full Text Available The main focus of the paper is the corporate performance measurement. At present, it is necessary to monitor this corporate performance and mostly try to improve it, because it could be very crucial competitive advantage in the market. The article provides an overview of key performance indicators (KPIs in the companies. Based on the theoretical data there are applied statistical methods, which should be achieved of main aim of the paper. The main aim of the paper is to describe which groups of Key Performance Indicators are connected with corporate performance system of measurement in the area of Information and Communication Activities. To support this approach theoretical information from the area of Key Performance Indicators connected with data from primary research were used, focused on the performance evaluation of enterprises.Successful companies are aware of the need for long-term strategic development, which is based on teamwork, respect of external environment and all subjects, which influence the business activities of the company directly or indirectly. It can be more effective to conceptualize relationship complete than limit to only consumer market and customer relations. Marketing moves more and more away from individual transaction orientation and rather focus on value creating relations, where the objective is to provide long- term stakeholder value. Day after day the company gets in touch with different groups of stakeholders, that influence the corporate development and it can not to access to these interest groups individually for reason of corporate limits. It is therefore necessary to define homogenous stakeholders groups, which are differ from each other in terms of their impact on business management. The authors of article put the question, which classification is the most statistical explaining the difference of stakeholders in term of evaluation their impact on business management. It was made cluster analysis for

Key performance indicators in plant asset management: hype, burden or real help?

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, A. (Steinbeis Advanced Risk Technologies, Stuttgart (Germany)); Bareiss, J.M. (EnBW, Stuttgart (Germany))

2010-05-15

The paper tackles the increasing role and use of indicators (e.g. the key performance indicators, KPIs) in asset management in power and process plants, in particular for risk and safety management (safety performance indicators, SPIs), inspection, maintenance, emerging risks analysis and aging management. The two main aspects of the use of indicators are monitoring of performance (e.g. of a single unit) and benchmarking (e.g. among different units). The basis for the considerations presented in the paper are several international projects in the field, showing that the main issue in the field is not and cannot be just the introduction of new indicators as such. They deal with the principles of establishing indicators, establishing generally accepted indicators (goal 'globally accepted' indicators), creating of 'repositories' of indicators in industry and respective tools. The repository/tool developed in the EU project iNTeg-Risk is presented in more detail. The main proposed criteria for successful introduction are the acceptance, transparency and clear added value, e.g. when the indicators help in finding solutions for the issues where the conventional analysis, e.g. the one based on engineering models and analysis is too expensive, complex or simply unavailable. Three practical cases are briefly shown in the paper: one for the improved asset management in a refinery, one for the identification of indicators helping to deal with emerging risks (how to identify them and how to assess risks of a new technology) and one for the implementation of a complex aging management program for industrial plants. (orig.)

Key performance indicators in plant asset management: hype, burden or real help?

International Nuclear Information System (INIS)

Jovanovic, A.; Bareiss, J.M.

2010-01-01

The paper tackles the increasing role and use of indicators (e.g. the key performance indicators, KPIs) in asset management in power and process plants, in particular for risk and safety management (safety performance indicators, SPIs), inspection, maintenance, emerging risks analysis and aging management. The two main aspects of the use of indicators are monitoring of performance (e.g. of a single unit) and benchmarking (e.g. among different units). The basis for the considerations presented in the paper are several international projects in the field, showing that the main issue in the field is not and cannot be just the introduction of new indicators as such. They deal with the principles of establishing indicators, establishing generally accepted indicators (goal 'globally accepted' indicators), creating of 'repositories' of indicators in industry and respective tools. The repository/tool developed in the EU project iNTeg-Risk is presented in more detail. The main proposed criteria for successful introduction are the acceptance, transparency and clear added value, e.g. when the indicators help in finding solutions for the issues where the conventional analysis, e.g. the one based on engineering models and analysis is too expensive, complex or simply unavailable. Three practical cases are briefly shown in the paper: one for the improved asset management in a refinery, one for the identification of indicators helping to deal with emerging risks (how to identify them and how to assess risks of a new technology) and one for the implementation of a complex aging management program for industrial plants. (orig.)

Performance Monitoring for Nuclear Safety Related Instrumentation at PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Zareen Khan Abdul Jalil Khan; Ridzuan Abdul Mutalib; Mohd Sabri Minhat

2015-01-01

The Reactor TRIGA PUSPATI (RTP) at Malaysia Nuclear Agency is a TRIGA Mark II type reactor and pool type cooled by natural circulation of light water. This paper describe on performance monitoring for nuclear safety related instrumentation in TRIGA PUSPATI Reactor (RTP) of based on various parameter of reactor safety instrument channel such as log power, linear power, Fuel temperature, coolant temperature will take into consideration. Methodology of performance on estimation and monitoring is to evaluate and analysis of reactor parameters which is important of reactor safety and control. And also to estimate power measurement, differential of log and linear power and fuel temperature during reactor start-up, operation and shutdown .This study also focus on neutron power fluctuation from fission chamber during reactor start-up and operation. This work will present result of performance monitoring from RTP which indicated the safety parameter identification and initiate safety action on crossing the threshold set point trip. Conclude that performance of nuclear safety related instrumentation will improved the reactor control and safety parameter during reactor start-up, operation and shutdown. (author)

Criteria and indicators for sustainable forest management: an alternative for monitoring

Directory of Open Access Journals (Sweden)

Jorge Luis Cué García

2015-11-01

Full Text Available The work was developed in the province of Cienfuegos, Cuba, with the hope of presenting an alternative methodology for monitoring criteria and indicators of sustainable forest management. Participatory workshops were used with actors and makers of SilviculturalUnits in the definition of criteria and indicators, based on the rules set forth by Herrero (2005. The Delphi method was used in the validation of the proposal. A hierarchical system that facilitates standardization of indicators and their aggregation to indices as well as the procedural guide indicators and checklist of them was used. The adequacy of Sustainability Barometer Prescott-Allen, 1997, quoted by Van Bellen (2004 was performed. The results of the analysis of the reliability of the instrument applied to the expert are acceptable because the Hotelling T2 value was 322.46 p = 0.007, there is a strong significant correlation between the elements of the instrument, expressed in an intraclass correlation coefficient from 0.756 to p = 0.038, Alpha reliability coefficient Cronbach 0.806, Spearman-Brown coefficient equal to 0.656 and Guttman split halves coefficient of 0.606. This alternative ensures a more comprehensive and holistic observance of the attributes of a system of sustainability indicators in the field of specialized forest Cuban business sector, enabling the assessment of the trend of sustainable forest management according to the specifics of each forestry unit.

Safety performance monitoring of autonomous marine systems

International Nuclear Information System (INIS)

Thieme, Christoph A.; Utne, Ingrid B.

2017-01-01

The marine environment is vast, harsh, and challenging. Unanticipated faults and events might lead to loss of vessels, transported goods, collected scientific data, and business reputation. Hence, systems have to be in place that monitor the safety performance of operation and indicate if it drifts into an intolerable safety level. This article proposes a process for developing safety indicators for the operation of autonomous marine systems (AMS). The condition of safety barriers and resilience engineering form the basis for the development of safety indicators, synthesizing and further adjusting the dual assurance and the resilience based early warning indicator (REWI) approaches. The article locates the process for developing safety indicators in the system life cycle emphasizing a timely implementation of the safety indicators. The resulting safety indicators reflect safety in AMS operation and can assist in planning of operations, in daily operational decision-making, and identification of improvements. Operation of an autonomous underwater vehicle (AUV) exemplifies the process for developing safety indicators and their implementation. The case study shows that the proposed process leads to a comprehensive set of safety indicators. It is expected that application of the resulting safety indicators consequently will contribute to safer operation of current and future AMS. - Highlights: • Process for developing safety indicators for autonomous marine systems. • Safety indicators based on safety barriers and resilience thinking. • Location of the development process in the system lifecycle. • Case study on AUV demonstrating applicability of the process.

Domestic water service delivery indicators and frameworks for monitoring, evaluation, policy and planning: a review.

Science.gov (United States)

Kayser, Georgia L; Moriarty, Patrick; Fonseca, Catarina; Bartram, Jamie

2013-10-11

Monitoring of water services informs policy and planning for national governments and the international community. Currently, the international monitoring system measures the type of drinking water source that households use. There have been calls for improved monitoring systems over several decades, some advocating use of multiple indicators. We review the literature on water service indicators and frameworks with a view to informing debate on their relevance to national and international monitoring. We describe the evidence concerning the relevance of each identified indicator to public health, economic development and human rights. We analyze the benefits and challenges of using these indicators separately and combined in an index as tools for planning, monitoring, and evaluating water services. We find substantial evidence on the importance of each commonly recommended indicator--service type, safety, quantity, accessibility, reliability or continuity of service, equity, and affordability. Several frameworks have been proposed that give structure to the relationships among individual indicators and some combine multiple indicator scores into a single index but few have been rigorously tested. More research is needed to understand if employing a composite metric of indicators is advantageous and how each indicator might be scored and scaled.

Performance audit procedures for opacity monitors

International Nuclear Information System (INIS)

Plaisance, S.J.; Peeler, J.W.

1987-04-01

This manual contains monitor-specific performance audit procedures and data forms for use in conducting audits of installed opacity continuous emission monitoring systems (CEMS). General auditing procedures and acceptance limits for various audit criteria are discussed. Practical considerations and common problems encountered in conducting audits are delineated, and recommendations are included to optimize the successful completion of performance audits. Performance audit procedures and field-data forms were developed for six common opacity CEMS: (1) Lear Siegler, Inc. Model RM-41; (2) Lear Siegler, Inc. Model RM-4; (3) Dynatron Model 1100; (4) Thermo Electron, Inc. Model 400; (5) Thermo Electron, Inc. Model 1000A; and (6) Enviroplan Model D-R280 AV. Generic audit procedures are included for use in evaluating opacity CEMS with multiple transmissometers and combiner devices. In addition, several approaches for evaluating the zero-alignment or clear-path zero response are described. The zero-alignment procedures are included since the factor is fundamental to the accuracy of opacity monitoring data, even though the zero-alignment checks cannot usually be conducted during a performance audit

Hybrid Modeling Improves Health and Performance Monitoring

Science.gov (United States)

2007-01-01

Scientific Monitoring Inc. was awarded a Phase I Small Business Innovation Research (SBIR) project by NASA's Dryden Flight Research Center to create a new, simplified health-monitoring approach for flight vehicles and flight equipment. The project developed a hybrid physical model concept that provided a structured approach to simplifying complex design models for use in health monitoring, allowing the output or performance of the equipment to be compared to what the design models predicted, so that deterioration or impending failure could be detected before there would be an impact on the equipment's operational capability. Based on the original modeling technology, Scientific Monitoring released I-Trend, a commercial health- and performance-monitoring software product named for its intelligent trending, diagnostics, and prognostics capabilities, as part of the company's complete ICEMS (Intelligent Condition-based Equipment Management System) suite of monitoring and advanced alerting software. I-Trend uses the hybrid physical model to better characterize the nature of health or performance alarms that result in "no fault found" false alarms. Additionally, the use of physical principles helps I-Trend identify problems sooner. I-Trend technology is currently in use in several commercial aviation programs, and the U.S. Air Force recently tapped Scientific Monitoring to develop next-generation engine health-management software for monitoring its fleet of jet engines. Scientific Monitoring has continued the original NASA work, this time under a Phase III SBIR contract with a joint NASA-Pratt & Whitney aviation security program on propulsion-controlled aircraft under missile-damaged aircraft conditions.

Development of safety performance indicators in Japan

International Nuclear Information System (INIS)

Ohashi, H.; Tamao, S.; Tanaka, J.; Sawayama, T.

2001-01-01

For the purpose of safety regulations of operating nuclear power stations in Japan, the regulatory authorities utilize two types of regulations. One is the direct regulation, such as periodical inspection to inspect the function and performance of equipment important to safety, and the other is the audit type regulation such as preservation inspection to audit the compliance with the safety preservation rules. As performance indicators are expected to be an effective tool to evaluate the activities by audit type regulations, NUPEC is studying a comprehensive set of operational performance indicators to meet the effective evaluation method for the safety preservation activities in the audit type regulations under the frame of current safety regulation system. The study includes the establishment of comprehensive operational performance indicators applicable in Japan, the effective application of performance indicators to the current Japanese regulation, the clarification of the applicable scope of utilization, the possibility of applying the performance indicators. This report describes the present status of our performance indicator studies. After the completion of these studies the regulatory authorities will evaluate if and how the new set of comprehensive performance indicators could be introduced to Japanese regulatory scheme. (author)

Key performance indicators for electric mining shovels and oil sands diggability

Science.gov (United States)

Patnayak, Sibabrata

A shovel performance monitoring study was undertaken in two oil sands mines operated by Syncrude Canada Ltd. using performance data obtained from P&H 4100 TS and BOSS electric mining shovels. One year of shovel performance data along with geological, geotechnical, and climatic data were analyzed. The approach adopted was to use current and voltage data collected from hoist and crowd motors and to calculate the energy and/or power associated with digging. Analysis of performance data along with digital video records of operating shovels indicated that hoist and crowd motor voltages and currents can be used to identify the beginning and the end of individual dig cycles. A dig cycle identification algorithm was developed. Performance indicators such as dig cycle time, hoist motor energy and power, and crowd motor energy and power were determined. The shovel performance indicators provide important insight into how geology, equipment and operators affect the digging efficiency. The hoist motor power is a useful key performance indicator for assessing diggability. Hoist motor energy consumption per tonne of material excavated and the number of dig cycles required for loading a truck can be useful key performance indicators for assessing operator performance and productivity. Analysis of performance data along with operators team schedules showed that the performance of a shovel can be significantly influenced by the operator's digging technique while digging uniform material. Up to 25% variability in hoist motor power consumption and 50% variability in productivity was noted between different operators. Shovel type and dipper teeth configuration can also influence the power draw on electrical motors during digging. There is no common agreement existing on the influence of bitumen content on oil sands diggability. By comparing the hoist motor power consumption, it was found that the rich ore was more difficult to dig than the lean ore. Similarly, estuarine ore was more

MONITORING DIAGNOSTIC INDICATORS DURING OPERATION OF A PRINT MACHIN

Directory of Open Access Journals (Sweden)

Jozef Dobránsky

2015-11-01

Full Text Available This article deals with monitoring diagnostic indicators during the operation of a machine used for production of packing materials with a print. It analyses low-frequency vibrations measured in individual spherical roller bearings in eight print positions. The rollers in these positions have a different pressure based on positioning these rollers in relation to the central roller. As a result, the article also deals with a correlation of pressure and level of measured low-frequency vibrations. The speed of the print machine (the speed of a line in meters per minute is a very important variable during its operation, this is why it is important to verify the values of vibrations in various speeds of the line, what can lead to revelation of one or more resonance areas. Moreover, it examines vibrations of the central roller drive and measurement of backlash of transmission cogs of this drive. Based on performed analyses recommendations for an operator of the machine have been conceived.

Domestic Water Service Delivery Indicators and Frameworks for Monitoring, Evaluation, Policy and Planning: A Review

Directory of Open Access Journals (Sweden)

Jamie Bartram

2013-10-01

Full Text Available Monitoring of water services informs policy and planning for national governments and the international community. Currently, the international monitoring system measures the type of drinking water source that households use. There have been calls for improved monitoring systems over several decades, some advocating use of multiple indicators. We review the literature on water service indicators and frameworks with a view to informing debate on their relevance to national and international monitoring. We describe the evidence concerning the relevance of each identified indicator to public health, economic development and human rights. We analyze the benefits and challenges of using these indicators separately and combined in an index as tools for planning, monitoring, and evaluating water services. We find substantial evidence on the importance of each commonly recommended indicator—service type, safety, quantity, accessibility, reliability or continuity of service, equity, and affordability. Several frameworks have been proposed that give structure to the relationships among individual indicators and some combine multiple indicator scores into a single index but few have been rigorously tested. More research is needed to understand if employing a composite metric of indicators is advantageous and how each indicator might be scored and scaled.

GRACE-Assimilated Drought Indicators for the U.S. Drought Monitor

Science.gov (United States)

Rui, Hualan; Vollmer, Bruce; Teng, Bill; Loeser, Carlee; Beaudoing, Hiroko; Rodell, Matt

2018-01-01

The Gravity Recovery and Climate Experiment (GRACE) mission detects changes in Earth's gravity field by precisely monitoring the changes in distance between two satellites orbiting the Earth in tandem. Scientists at NASA's Goddard Space Flight Center generate GRACE-assimilated groundwater and soil moisture drought indicators each week, for drought monitor-related studies and applications. The GRACE-assimilated Drought Indicator Version 2.0 data product (GRACE-DA-DM V2.0) is archived at, and distributed by, the NASA GES DISC (Goddard Earth Sciences Data and Information Services Center). More information about the data and data access is available on the data product landing page at https://disc.gsfc.nasa.gov/datasets /GRACEDADM_CLSM0125US_7D_2.0/summary. The GRACE-DA-DM V2.0 data product contains three drought indicators: Groundwater Percentile, Root Zone Soil Moisture Percentile, and Surface Soil Moisture Percentile. The drought indicators are of wet or dry conditions, expressed as a percentile, indicating the probability of occurrence within the period of record from 1948 to 2012. These GRACE-assimilated drought indicators, with improved spatial and temporal resolutions, should provide a more comprehensive and objective identification of drought conditions. This presentation describes the basic characteristics of the data and data services at NASA GES DISC and collaborative organizations, and uses a few examples to demonstrate the simple ways to explore the GRACE-assimilated drought indicator data.

Indicators to assess the environmental performances of an innovative subway station : example of Noisy-Champs

Science.gov (United States)

Schertzer, D. J. M.; Charbonnier, L.; Versini, P. A.; Tchiguirinskaia, I.

2017-12-01

Noisy-Champs is a train station located in Noisy-le-Grand and Champs-sur-Marne, in the Paris urban area (France). Integrated into the Grand Paris Express project (huge development project to modernise the transport network around Paris), this station is going to be radically transformed and become a major hub. Designed by the architectural office Duthilleul, the new Noisy-Champs station aspires to be an example of an innovative and sustainable infrastructure. Its architectural precepts are indeed meant to improve its environmental performances, especially those related to storm water management, water consumption and users' thermal and hygrometric comfort. In order to assess and monitor these performances, objectives and associated indicators have been developed. They aim to be adapted for a specific infrastructure such as a public transport station. Analyses of pre-existing comfort simulations, blueprints and regulatory documents have led to identify the main issues for the Noisy-Champs station, focusing on its resilience to extreme events like droughts, heatwaves and heaxvy rainfalls. Both objectives and indicators have been proposed by studying the space-time variabilities of physical fluxes (heat, pollutants, radiation, wind and water) and passenger flows, and their interactions. Each indicator is linked to an environmental performance and has been determined after consultation of the different stakeholders involved in the rebuilding of the station. It results a monitoring program to assess the environmental performances of the station composed by both the indicators grid and their related objectives, and a measurement program detailing the nature and location of sensors, and the frequency of measurements.

CHALLENGES WHEN DEVELOPING PERFORMANCE INDICATORS

Directory of Open Access Journals (Sweden)

Brindusa Maria POPA

2015-04-01

Full Text Available Abstract Developing key performance indicators (KPIs represents one step closer to the achievement of objectives and strategic vision of the organization. They are important elements of the pathway towards performance, they evaluate and indicate the level of progress, guide the organizational strategy, they can be considered even the qualitative or quantitative expression of the execution of the strategy. Building reliable and appropriate measurement systems is one of the most difficult stage in the performance evaluation process. Such systems of management will help the executives and the management teams identify and build upon the elements that create competitive advantage and opportunities for better results.

5 CFR 430.207 - Monitoring performance.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Monitoring performance. 430.207 Section 430.207 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERFORMANCE MANAGEMENT Performance Appraisal for General Schedule, Prevailing Rate, and Certain Other Employees § 430.207...

Guidance on the implementation of a risk based safety performance monitoring system for nuclear power plants

International Nuclear Information System (INIS)

Sewell, R.T.; Kuritzky, A.S.; Khatib-Rahbar, M.

1997-05-01

The principal objective of the present study is to review and evaluate existing Performance Indicator (PI) monitoring programs, and to develop and demonstrate an overall PSA-based methodology and framework for the monitoring and use of risk-based PIs and SIs (Safety Indicator), that would enable: Identification of trends and patterns in safety performance at a specific plant and a population of plants; Assessment of the significance of the trends and patterns; Identification of precursors of accident sequences and safety reductions; Identification of the most critical functional areas of concern, especially as they relate to a defense-in-depth safety philosophy; Comparison of safety performance trends at a plant with those at comparable plants; Incorporation of the PIs and SIs into a risk- and performance-based decision process. To support the overall project objective, it is important that information needs and data collection procedures are clearly outlined. Of key significance in this regard is the premise that a performance monitoring system should not be burdened by an excessive number of low-level PIs that may have only a peripheral relationship to safety. Other supporting objectives of the study include: To identify and discuss other issues pertaining to the practical implementation of a safety performance monitoring system (outlining the databases and algorithms needed); and to demonstrate implementation of the preliminary guidance for monitoring and use of the selected set of PIs and SIs, within the proposed framework, via application to the operating history of a NPP having a PSA and readily available event data

The Effect of Monitoring Committees on the Relationship between Board Structure and Firm Performance

Directory of Open Access Journals (Sweden)

Aymen Ammari

2016-12-01

Full Text Available The purpose of this study is to investigate the impact of board structure on the performance of French firms in the presence of several monitoring committees. We studied 80 publicly listed French firms spanning from 2001 to 2013. We concluded that large board size has a negative effect on market performance. While large board size in combination with the existence of at least three committees enhances accounting performance and does not have any impact on market performance, the existence of a board dominated by independent directors with the presence of at least three committees seems to have only a negative impact on accounting performance. Our findings indicate that monitoring committees are beneficial for shareholders only for corporations with a large board size.

Application of a binomial cusum control chart to monitor one drinking water indicator

Directory of Open Access Journals (Sweden)

Elisa Henning

2014-02-01

Full Text Available The aim of this study is to analyze the use of a binomial cumulative sum chart (CUSUM to monitor the presence of total coliforms, biological indicators of quality of water supplies in water treatment processes. The sample series were monthly taken from a water treatment plant and were analyzed from 2007 to 2009. The statistical treatment of the data was performed using GNU R, and routines were created for the approximation of the upper limit of the binomial CUSUM chart. Furthermore, a comparative study was conducted to investigate whether there is a significant difference in sensitivity between the use of CUSUM and the traditional Shewhart chart, the most commonly used chart in process monitoring. The results obtained demonstrate that this study was essential for making the right choice in selecting a chart for the statistical analysis of this process.

Chemical monitoring strategy for the assessment of advanced water treatment plant performance.

Science.gov (United States)

Drewes, J E; McDonald, J A; Trinh, T; Storey, M V; Khan, S J

2011-01-01

A pilot-scale plant was employed to validate the performance of a proposed full-scale advanced water treatment plant (AWTP) in Sydney, Australia. The primary aim of this study was to develop a chemical monitoring program that can demonstrate proper plant operation resulting in the removal of priority chemical constituents in the product water. The feed water quality to the pilot plant was tertiary-treated effluent from a wastewater treatment plant. The unit processes of the AWTP were comprised of an integrated membrane system (ultrafiltration, reverse osmosis) followed by final chlorination generating a water quality that does not present a source of human or environmental health concern. The chemical monitoring program was undertaken over 6 weeks during pilot plant operation and involved the quantitative analysis of pharmaceuticals and personal care products, steroidal hormones, industrial chemicals, pesticides, N-nitrosamines and halomethanes. The first phase consisted of baseline monitoring of target compounds to quantify influent concentrations in feed waters to the plant. This was followed by a period of validation monitoring utilising indicator chemicals and surrogate measures suitable to assess proper process performance at various stages of the AWTP. This effort was supported by challenge testing experiments to further validate removal of a series of indicator chemicals by reverse osmosis. This pilot-scale study demonstrated a simplified analytical approach that can be employed to assure proper operation of advanced water treatment processes and the absence of trace organic chemicals.

Key indicators for organizational performance measurement

Directory of Open Access Journals (Sweden)

Firoozeh Haddadi

2014-09-01

Full Text Available Each organization for assessing the amount of utility and desirability of their activities, especially in complex and dynamic environments, requires determining and ranking the vital performance indicators. Indicators provide essential links among strategy, execution and ultimate value creation. The aim of this paper is to develop a framework, which identifies and prioritizes Key Performance Indicators (KPIs that a company should focus on them to define and measure progress towards organizational objectives. For this purpose, an applied research was conducted in 2013 in an Iranian telecommunication company. We first determined the objectives of the company with respect to four perspectives of BSC (Balanced Scorecard framework. Next, performance indicators were listed and paired wise comparisons were accomplished by company's high-ranked employees through standard Analytic Hierarchy Process (AHP questionnaires. This helped us establish the weight of each indicator and to rank them, accordingly.

Track 2- major components reliability and materials issues. Some performance indicators of PWR steam generators

International Nuclear Information System (INIS)

Milivojevic, S.; Spasojevic, D.; Riznic, J.

2001-01-01

The monitoring of operational performance is a crucial aspect of the management of equipment operation and maintenance in many industries, including nuclear and thermal power plants. Monitoring involves the collection and analysis of data on the operation. In these paper an analysis was made of steam generators in operation, i.e., their malfunctions during the plant life cycle with the aim of studying the characteristics of failure rate and repair rate. These values are necessary parameters if we are to determine the reliability and availability of the steam generator as a basis for the analysis of its effect on the safety and efficiency of the nuclear power plant. We analyzed IAEA available data for period from 1971 to 1998. Each steam generator was monitored individually during plants' lifetime. The data on steam generator failures were presented in uniform format, allowing the consistency in failure classification and data reporting. Operational presence of the analyzed steam generators is given for each calendar year and each lifetime year: the failure rate l and repair rate m with associated boundaries are calculated. The general trends in calendar years performance indicators (μ) of steam generators is investigated. The distributions of lifetime l and m are formed, as a complement to the analysis of calendar years performance indicators. With aspect of steam generators influence on reliability and availability of nuclear power plants, the empirical probability distribution for failure rates and repair rates are also constructed. (author)

A participatory approach to design monitoring indicators of production diseases in organic dairy farms.

Science.gov (United States)

Duval, J E; Fourichon, C; Madouasse, A; Sjöström, K; Emanuelson, U; Bareille, N

2016-06-01

Production diseases have an important negative effect on the health and welfare of dairy cows. Although organic animal production systems aim for high animal health levels, compliance with European organic farming regulations does not guarantee that this is achieved. Herd health and production management (HHPM) programs aim at optimizing herd health by preventing disease and production problems, but as yet they have not been consistently implemented by farmers. We hypothesize that one reason is the mismatch between what scientists propose as indicators for herd health monitoring and what farmers would like to use. Herd health monitoring is a key element in HHPM programs as it permits a regular assessment of the functioning of the different components of the production process. Planned observations or measurements of these components are indispensable for this monitoring. In this study, a participatory approach was used to create an environment in which farmers could adapt the indicators proposed by scientists for monitoring the five main production diseases on dairy cattle farms. The adaptations of the indicators were characterized and the farmers' explanations for the changes made were described. The study was conducted in France and Sweden, which differ in terms of their national organic regulations and existing advisory services. In both countries, twenty certified organic dairy farmers and their animal health management advisors participated in the study. All of the farmers adapted the initial monitoring plan proposed by scientists to specific production and animal health situation on their farm. This resulted in forty unique and farm-specific combinations of indicators for herd health monitoring. All but three farmers intended to monitor five health topics simultaneously using the constructed indicators. The qualitative analysis of the explanations given by farmers for their choices enabled an understanding of farmers' reasons for selecting and adapting

Radioactivity monitor for high-performance liquid chromatography

International Nuclear Information System (INIS)

Reeve, D.R.; Crozier, A.

1977-01-01

The coupling of a homogeneous radioactivity monitor to a liquid chromatograph involves compromises between the sensitivity of the monitor and the resolution and speed of analysis of the chromatograph. The theoretical relationships between these parameters are considered and expressions derived which make it possible to calculate suitable monitor operating conditions for most types of high-performance liquid chromatography

Experience from a multi-country initiative to improve the monitoring of selected reproductive health indicators in Africa.

Science.gov (United States)

Barreix, Maria; Tunçalp, Özge; Mutombo, Namuunda; Adegboyega, Ayotunde A; Say, Lale

2017-05-01

Universal access to sexual and reproductive health remains part of the unfinished business of global development in Africa. To achieve it, health interventions should be monitored using programmatic indicators. WHO's Strengthening Measurement of Reproductive Health Indicators in Africa initiative, implemented in Ghana, Nigeria, Kenya, Uganda, and Zimbabwe, aimed to improve national information systems for routine monitoring of reproductive health indicators. Participating countries developed action plans employing a two-pronged strategy: (1) revising, standardizing, and harmonizing existing reproductive health indicators captured through routine information-systems; and (2) building data-collection capacity through training and supervision at select pilot sites. Country teams evaluated existing and new indicators, and outlined barriers to strengthening routine measurement. Activities included updating abortion-care guidelines (spontaneous and induced abortions), providing training on laws surrounding induced abortions, and improving feedback mechanisms. The country teams updated monitoring and evaluation frameworks, and attempted to build recording/reporting capacity in selected pilot areas. Barriers to implementing the initiative that were encountered included restrictive induced-abortion laws, staff turn-over, and administrative delays, including low capacity among healthcare staff and competing priorities for staff time. The areas identified for further improvement were up-scaling programs to a national level, creating scorecards to record data, increasing collaborations with the private sector, conducting related costing exercises, and performing ex-post evaluations. © 2017 World Health Organization; licensed by Wiley on behalf of International Federation of Gynecology and Obstetrics.

Performance monitoring for brain-computer-interface actions.

Science.gov (United States)

Schurger, Aaron; Gale, Steven; Gozel, Olivia; Blanke, Olaf

2017-02-01

When presented with a difficult perceptual decision, human observers are able to make metacognitive judgements of subjective certainty. Such judgements can be made independently of and prior to any overt response to a sensory stimulus, presumably via internal monitoring. Retrospective judgements about one's own task performance, on the other hand, require first that the subject perform a task and thus could potentially be made based on motor processes, proprioceptive, and other sensory feedback rather than internal monitoring. With this dichotomy in mind, we set out to study performance monitoring using a brain-computer interface (BCI), with which subjects could voluntarily perform an action - moving a cursor on a computer screen - without any movement of the body, and thus without somatosensory feedback. Real-time visual feedback was available to subjects during training, but not during the experiment where the true final position of the cursor was only revealed after the subject had estimated where s/he thought it had ended up after 6s of BCI-based cursor control. During the first half of the experiment subjects based their assessments primarily on the prior probability of the end position of the cursor on previous trials. However, during the second half of the experiment subjects' judgements moved significantly closer to the true end position of the cursor, and away from the prior. This suggests that subjects can monitor task performance when the task is performed without overt movement of the body. Copyright © 2016 Elsevier Inc. All rights reserved.

Biological monitoring of radiation using indicator plants

International Nuclear Information System (INIS)

Kim, Jin Kyoo; Chun, Ki Jung; Kim, Kook Chan; Kim, In Kyoo; Song, Heui Sub

1994-12-01

Some clones of Tradescantia had dose response relationship involving somatic mutations such as appearance of pink, colorless or giant cell, and/or loss of reproductive integrity of stamen hair cells when exposed to radiation. Since Tradescantia could respond to radiation level as low as human being could be exposed to, it could play an important role as scientific tool of botanical tester for radiation. Especially TSH system can be easily applied to in situ monitoring of radiation by virtue of its excellent radiation indicator ship and simpleness in detection of mutations by radiation. 10 figs, 6 tabs, 19 refs. (Author)

Biological monitoring of radiation using indicator plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Kyoo; Chun, Ki Jung; Kim, Kook Chan; Kim, In Kyoo; Song, Heui Sub [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-12-01

Some clones of Tradescantia had dose response relationship involving somatic mutations such as appearance of pink, colorless or giant cell, and/or loss of reproductive integrity of stamen hair cells when exposed to radiation. Since Tradescantia could respond to radiation level as low as human being could be exposed to, it could play an important role as scientific tool of botanical tester for radiation. Especially TSH system can be easily applied to in situ monitoring of radiation by virtue of its excellent radiation indicator ship and simpleness in detection of mutations by radiation. 10 figs, 6 tabs, 19 refs. (Author).

How reliable are geometry-based building indices as thermal performance indicators?

International Nuclear Information System (INIS)

Rodrigues, Eugénio; Amaral, Ana Rita; Gaspar, Adélio Rodrigues; Gomes, Álvaro

2015-01-01

Highlights: • Geometry-based building indices are tested in different European climate regions. • Building design programs are used to randomly generate sets of simulation models. • Some indices correlate in specific climates and design programs. • Shape-based Relative Compactness presented the best correlation of all indices. • Window-to-Surface Ratio was the window-based index with best correlation. - Abstract: Architects and urban planners have been relying on geometry-based indices to design more energy efficient buildings for years. The advantage of such indices is their ease of use and capability to capture the relation of a few geometric variables with the building’s performance. However, such relation is usually found using only a few simple building models and considering only a few climate regions. This paper presents the analysis of six geometry-based building indices to determine their adequacy in eight different climate regions in Europe. For each location, three residential building design programs were used as building specifications. Two algorithms were employed to randomly generate and assess the thermal performance of three sets of 500 alternative building models. The results show that geometry-based indices only correlate with the buildings’ thermal performance according to specific climate regions and building design programs

GPS Civil Monitoring Performance Specification

Science.gov (United States)

2009-02-10

This Civil Monitoring Performance Specification (CMPS) is published and maintained at : the direction of the Program Manager for Civil Applications, Global Positioning Systems : Wing (GPSW). The purpose of this document is to provide a comprehensive ...

Measuring individual work performance: identifying and selecting indicators.

Science.gov (United States)

Koopmans, Linda; Bernaards, Claire M; Hildebrandt, Vincent H; de Vet, Henrica C W; van der Beek, Allard J

2014-01-01

Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. This study was designed to (1) identify indicators for each dimension, (2) select the most relevant indicators, and (3) determine the relative weight of each dimension in ratings of work performance. IWP indicators were identified from multiple research disciplines, via literature, existing questionnaires, and expert interviews. Subsequently, experts selected the most relevant indicators per dimension and scored the relative weight of each dimension in ratings of IWP. In total, 128 unique indicators were identified. Twenty-three of these indicators were selected by experts as most relevant for measuring IWP. Task performance determined 36% of the work performance rating, while the other three dimensions respectively determined 22%, 20% and 21% of the rating. Notable consensus was found on relevant indicators of IWP, reducing the number from 128 to 23 relevant indicators. This provides an important step towards the development of a standardized, generic and short measurement instrument for assessing IWP.

Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

International Nuclear Information System (INIS)

Ulm, Franz-Josef

2000-01-01

OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

Examining Big Brother's Purpose for Using Electronic Performance Monitoring

Science.gov (United States)

Bartels, Lynn K.; Nordstrom, Cynthia R.

2012-01-01

We examined whether the reason offered for electronic performance monitoring (EPM) influenced participants' performance, stress, motivation, and satisfaction. Participants performed a data-entry task in one of five experimental conditions. In one condition, participants were not electronically monitored. In the remaining conditions, participants…

Key performance indicators in intensive care medicine. A retrospective matched cohort study.

Science.gov (United States)

Kastrup, M; von Dossow, V; Seeling, M; Ahlborn, R; Tamarkin, A; Conroy, P; Boemke, W; Wernecke, K-D; Spies, Claudia

2009-01-01

Expert panel consensus was used to develop evidence-based process indicators that were independent risk factors for the main clinical outcome parameters of length of stay in the intensive care unit (ICU) and mortality. In a retrospective, matched data analysis of patients from five ICUs at a tertiary university hospital, agreed process indicators (sedation monitoring, pain monitoring, mean arterial pressure [MAP] >or= 60 mmHg, tidal volume [TV] or= 80 and or= 60 mmHg and BG >or= 80 mg/dl were relevant for survival. Linear regression of the 634 patients showed that analgesia monitoring, PIP or= 60 mmHg, BG >or= 80 mg/dl and indicating that adherence to evidence-based key process indicators may reduce mortality and length of ICU stay.

The thermal performance monitoring and optimisation system (TEMPO): lessons learnt

International Nuclear Information System (INIS)

Beere, W.H.Aa.

2005-09-01

The goal of condition monitoring, fault detection and diagnosis is to ensure the success of planned operations by recognizing anomalies in a plant. This is achieved by monitoring the condition of equipment and instrumentation, and by detection, identification, diagnosis and removal of faults. The method of using physical modelling for condition monitoring has been investigated at the Institutt for energiteknikk since 1998. The result of this work was the development of the TEMPO (ThErMal Performance monitoring and Optimisation) toolbox. In this toolbox plant wide models are built up of unit sub-models. These are then linked to measurements by using data reconciliation. This enables the comparison of calculated to measured values as well as an indication of the significance of any deviation. It also allows the calculation of unmeasured variables as well as an overall 'goodness of fit' indicator. Since its first release in 2000 the TEMPO toolbox has been used to model the turbine cycles of several NPPs. Installations include Forsmark 3 and Loviisa 2 with feasibility studies for Dukovany, Olkiluoto 2, Almaraz and Paks. The experience from creating and installing TEMPO at these plants has now been collated and is presented in this report. This experience is used to indicate which direction the further development of TEMPO should take. The experience of using TEMPO has shown that the data-reconciliation method can be applied to the turbine cycles of NPPs. Problems that have arose have primarily been connected to the usability of the toolbox. This has prompted a shift in the development emphasis from the task of developing the method to that of developing its usability. A summary of improvement proposals is given in this paper. The reader is welcome to comment on these proposals or to suggest alternative improvements. (Author)

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

Science.gov (United States)

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

Expert monitoring and verbal feedback as sources of performance pressure.

Science.gov (United States)

Buchanan, John J; Park, Inchon; Chen, Jing; Mehta, Ranjana K; McCulloch, Austin; Rhee, Joohyun; Wright, David L

2018-05-01

The influence of monitoring-pressure and verbal feedback on the performance of the intrinsically stable bimanual coordination patterns of in-phase and anti-phase was examined. The two bimanual patterns were produced under three conditions: 1) no-monitoring, 2) monitoring-pressure (viewed by experts), and 3) monitoring-pressure (viewed by experts) combined with verbal feedback emphasizing poor performance. The bimanual patterns were produced at self-paced movement frequencies. Anti-phase coordination was always less stable than in-phase coordination across all three conditions. When performed under conditions 2 and 3, both bimanual patterns were performed with less variability in relative phase across a wide range of self-paced movement frequencies compared to the no-monitoring condition. Thus, monitoring-pressure resulted in performance stabilization rather than degradation and the presence of verbal feedback had no impact on the influence of monitoring pressure. The current findings are inconsistent with the predictions of explicit monitoring theory; however, the findings are consistent with studies that have revealed increased stability for the system's intrinsic dynamics as a result of attentional focus and intentional control. The results are discussed within the contexts of the dynamic pattern theory of coordination, explicit monitoring theory, and action-focused theories as explanations for choking under pressure. Copyright © 2018. Published by Elsevier B.V.

Aquatic indicator organisms as a tool to monitor discharges from nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Outola, Iisa; Vartti, Vesa-Pekka; Klemola, Seppo [STUK - Radiation and Nuclear Safety Authority, P.O. Box 14, 00881 Helsinki (Finland)

2014-07-01

There are four operating nuclear power plant units in Finland at two separate locations. The units started operation during 1977-1980. The surveillance of radioactive substances in the vicinities of the nuclear power plant is carried out under the permanent monitoring programs. Some 1000 samples are taken annually from the surroundings of the power plants to confirm that the discharges from the power plants are within permissible release limits and to monitor the dispersion of discharges in the environment. Aquatic indicator organisms (macro-algae, periphyton, mussels, crustacean, submerged aquatic plants) are included in the monitoring program. The indicator organisms are valuable monitoring objects both in normal and emergency situations because they accumulate effectively and often very rapidly radioactive substances from the medium. Six different species (Periphyton, Fucus vesiculosus, Myriophyllum spicatum, Potamogeton pectinatus, Saduria entomon, Macoma Baltica/Mytilus edulis) are collected regularly. Number of sampling location for each species varies from 1 to 7. Some species are collected continuously, some 1-2 times in a year. In this study we have evaluated the monitoring results for the aquatic indicator organisms for the period of 2005-2010 concerning concentration of discharge nuclides. Our aim was to answer the following questions using the monitoring data from aquatic organisms: 1) Which radionuclides are released to the marine environment and how often do we detect them? 2) How far from the nuclear power plants discharge radionuclides are detected? 3) How concentration of discharge radionuclides has changed with time in aquatic organisms? The number of discharge nuclides detected in the aquatic indicator samples was 11. Most of them were only detected in few samples, but {sup 58}Co, {sup 60}Co, {sup 54}Mn and {sup 110m}Ag were detected more frequently. Most of the observations above detection limits were made within the 5 km distance from the

Performance-based building codes: a call for injury prevention indicators that bridge health and building sectors.

Science.gov (United States)

Edwards, N

2008-10-01

The international introduction of performance-based building codes calls for a re-examination of indicators used to monitor their implementation. Indicators used in the building sector have a business orientation, target the life cycle of buildings, and guide asset management. In contrast, indicators used in the health sector focus on injury prevention, have a behavioural orientation, lack specificity with respect to features of the built environment, and do not take into account patterns of building use or building longevity. Suggestions for metrics that bridge the building and health sectors are discussed. The need for integrated surveillance systems in health and building sectors is outlined. It is time to reconsider commonly used epidemiological indicators in the field of injury prevention and determine their utility to address the accountability requirements of performance-based codes.

Assessing and monitoring soil quality at agricultural waste disposal areas-Soil Indicators

Science.gov (United States)

Doula, Maria; Kavvadias, Victor; Sarris, Apostolos; Lolos, Polykarpos; Liakopoulou, Nektaria; Hliaoutakis, Aggelos; Kydonakis, Aris

2014-05-01

The necessity of elaborating indicators is one of the priorities identified by the United Nations Convention to Combat Desertification (UNCCD). The establishment of an indicator monitoring system for environmental purposes is dependent on the geographical scale. Some indicators such as rain seasonality or drainage density are useful over large areas, but others such as soil depth, vegetation cover type, and land ownership are only applicable locally. In order to practically enhance the sustainability of land management, research on using indicators for assessing land degradation risk must initially focus at local level because management decisions by individual land users are taken at this level. Soils that accept wastes disposal, apart from progressive degradation, may cause serious problems to the surrounding environment (humans, animals, plants, water systems, etc.), and thus, soil quality should be necessarily monitored. Therefore, quality indicators, representative of the specific waste type, should be established and monitored periodically. Since waste composition is dependent on their origin, specific indicators for each waste type should be established. Considering agricultural wastes, such a specification, however, could be difficult, since almost all agricultural wastes are characterized by increased concentrations of the same elements, namely, phosphorous, nitrogen, potassium, sulfur, etc.; contain large amounts of organic matter; and have very high values of chemical oxygen demand (COD), biochemical oxygen demand (BOD), and electrical conductivity. Two LIFE projects, namely AgroStrat and PROSODOL are focused on the identification of soil indicators for the assessment of soil quality at areas where pistachio wastes and olive mill wastes are disposed, respectively. Many soil samples were collected periodically for 2 years during PROSODOL and one year during AgroStrat (this project is in progress) from waste disposal areas and analyzed for 23 parameters

Systems engineering approach towards performance monitoring of emergency diesel generator

International Nuclear Information System (INIS)

Nurhayati Ramli; Lee, Y.K.

2013-01-01

Full-text: Systems engineering is an interdisciplinary approach and means to enable the realization of successful systems. In this study, systems engineering approach towards the performance monitoring of Emergency Diesel Generator (EDG) is presented. Performance monitoring is part and parcel of predictive maintenance where the systems and components conditions can be detected before they result into failures. In an effort to identify the proposal for addressing performance monitoring, the EDG boundary has been defined. Based on the Probabilistic Safety Analysis (PSA) results and industry operating experiences, the most critical component is identified. This paper proposed a systems engineering concept development framework towards EDG performance monitoring. The expected output of this study is that the EDG reliability can be improved by the performance monitoring alternatives through the systems engineering concept development effort. (author)

Assessing the utility of meteorological drought indices in monitoring summer drought based on soil moisture in Chongqing, China

Science.gov (United States)

Chen, Hui; Wu, Wei; Liu, Hong-Bin

2018-04-01

Numerous drought indices have been developed to analyze and monitor drought condition, but they are region specific and limited by various climatic conditions. In southwest China, summer drought mainly occurs from June to September, causing destructive and profound impact on agriculture, society, and ecosystems. The current study assesses the availability of meteorological drought indices in monitoring summer drought in this area at 5-day scale. The drought indices include the relative moisture index ( M), the standardized precipitation index (SPI), the standardized precipitation evapotranspiration index (SPEI), the composite index of meteorological drought (CIspi), and the improved composite index of meteorological drought (CIwap). Long-term daily precipitation and temperature from 1970 to 2014 are used to calculate 30-day M ( M 30), SPI (SPI30), SPEI (SPEI30), 90-day SPEI (SPEI90), CIspi, and CIwap. The 5-day soil moisture observations from 2010 to 2013 are applied to assess the performance of these drought indices. Correlation analysis, overall accuracy, and kappa coefficient are utilized to investigate the relationships between soil moisture and drought indices. Correlation analysis indicates that soil moisture is well correlated with CIwap, SPEI30, M 30, SPI30, and CIspi except SPEI90. Moreover, drought classifications identified by M 30 are in agreement with that of the observed soil moisture. The results show that M 30 based on precipitation and potential evapotranspiration is an appropriate indicator for monitoring drought condition at a finer scale in the study area. According to M 30, summer drought during 1970-2014 happened in each year and showed a slightly upward tendency in recent years.

Sensing loop performance monitoring in the safety systems of nuclear power stations

International Nuclear Information System (INIS)

Colley, R.C.; Widmeyer, M.; Weiss, J.H.; Wiegle, H.R.

1991-01-01

This paper reports on plant technical specifications and NRC regulatory guides which require testing of sensing loops to detect degradation and failure. Industry efforts have focused on specific manual testing to detect individual failure modes such as increased response time and calibration drift. Recent work performed by EPRI and by others using instrument loop data, failure modes, and effects analyses (FMEAs), and experience with utility on-line sensor health monitoring programs has established qualitative physical models of the sensing loop. This methodology has demonstrated that sensing loop cross comparison techniques can provide equivalent indication of sensing loop performance. It also provides more frequent sensing loop health indication than manual testing and reduces the requirement for manual testing

Key Performance Indicators for Primary Schools.

Science.gov (United States)

Strand, Steve

Focusing mostly on their application for primary schools, this document describes the educational key performance indicators (KPI) employed by the Wendsworth, England, Local Educational Authority (LEA). Indicators are divided into 3 areas, educational context, resource development, and outcomes. Contextual indicators include pupil mobility, home…

EEG indices correlate with sustained attention performance in patients affected by diffuse axonal injury.

Science.gov (United States)

Coelli, Stefania; Barbieri, Riccardo; Reni, Gianluigi; Zucca, Claudio; Bianchi, Anna Maria

2018-06-01

The aim of this study is to assess the ability of EEG-based indices in providing relevant information about cognitive engagement level during the execution of a clinical sustained attention (SA) test in healthy volunteers and DAI (diffused axonal injury)-affected patients. We computed three continuous power-based engagement indices (P β /P α , 1/P α , and P β / (P α + P θ )) from EEG recordings in a control group (n = 7) and seven DAI-affected patients executing a 10-min Conners' "not-X" continuous performance test (CPT). A correlation analysis was performed in order to investigate the existence of relations between the EEG metrics and behavioral parameters in both the populations. P β /P α and 1/P α indices were found to be correlated with reaction times in both groups while P β / (P α + P θ ) and P β /P α also correlated with the errors rate for DAI patients. In line with previous studies, time course fluctuations revealed a first strong decrease of attention after 2 min from the beginning of the test and a final fading at the end. Our results provide evidence that EEG-derived indices extraction and evaluation during SA tasks are helpful in the assessment of attention level in healthy subjects and DAI patients, offering motivations for including EEG monitoring in cognitive rehabilitation practice. Graphical abstract Three EEG-derived indices were computed from four electrodes montages in a population of seven healthy volunteers and a group of seven DAI-affected patients. Results show a significant correlation between the time course of the indices and behavioral parameters, thus demonstrating their usefulness in monitoring mental engagement level during a sustained attention task.

Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Wreathall, J.; Appignani, P.; Modarres, M.

1990-01-01

Work is currently being performed to develop and integrate programmatic performance indicators, that is, indicators of performance associated with the influence on safety associated with plant functional areas like maintenance, operations and training. The process for identifying and evaluating indicators associated with maintenance and training has been described earlier. Since that time, the authors have evaluated the maintenance indicators: inadvertent engineered safety feature actuations due to test and maintenance errors, and daily power loss (DPL), which seemingly show relationships to safety. Work on training process will lead to characteristic sorts of behavior. In the integration study, several frameworks have been developed to provide a basis for describing the interrelationships of plant behavior, personnel behavior, and safety. These will be applied in the next phase of the work to perform the nominal integration

Multidimensional Monitoring of Recovery Status and Implications for Performance.

Science.gov (United States)

Heidari, Jahan; Beckmann, Jürgen; Bertollo, Maurizio; Brink, Michel; Kallus, Wolfgang; Robazza, Claudio; Kellmann, Michael

2018-03-15

Monitoring of recovery in the context of athletic performance has gained significant importance during recent years. As a systematic process of data collection and evaluation, the monitoring of recovery can be implemented for various purposes. It may aid to prevent negative outcomes of training or competition, such as underrecovery, overtraining, or injuries. Further, it aims at establishing routines and strategies necessary to guarantee athletes' readiness for performance by restoring their depleted resources. Comprehensive monitoring of recovery ideally encompasses a multidimensional approach, thereby considering biological, psychological, and social monitoring methods. From a biological perspective, physiological (e.g., cardiac parameters), biochemical (e.g., creatine kinase), hormonal (e.g., salivary cortisol) and immunological (e.g., immunoglobulin A) markers can be taken into account to operationalize training loads and recovery needs. Psychological approaches suggest the application of validated and reliable psychometric questionnaires (e.g., Recovery-Stress Questionnaire for Athletes) to measure a subjective perception of recovery as well as the subjective degree of training- or competition-induced fatigue. Social aspects also play a role in performance monitoring and may hence provide essential performance-related information. The implementation of a monitoring routine within athletic environments represents a continuous process which functions as an effective addition to training and depends on a range of conditions (e.g., organizational regulations, commitment of athletes). Current research in the field of monitoring aims at establishing individualized monitoring regimes that are referring to intraindividual reference values with the help of innovative technological devices.

Breast cancer screening in Italy: evaluating key performance indicators for time trends and activity volumes.

Science.gov (United States)

Giordano, Livia; Castagno, Roberta; Giorgi, Daniela; Piccinelli, Cristiano; Ventura, Leonardo; Segnan, Nereo; Zappa, Marco

2015-01-01

Together with the National centre for screening monitoring (ONS), GISMa supports annual collection of data on national breast screening activities. Aggregated data on implementation and performance are gathered through a standardized form to calculate process and impact indicators. Analyzed data belong to 153 local programmes in the period 2006-2011 (2006-2012 for participation rate only). During the whole period, Italian crude participation rate exceeded GISMa's acceptable standard (50%), even though a higher participation in northern and central Italy compared to southern Italy and Islands was observed. Time trend analysis of diagnostic indicators confirmed in 2011 an adequate quality of breast screening performance, especially at subsequent screening. Recall rate at initial screening did not reach the acceptable standard (performance was achieved at subsequent screening. The same trend was followed by the overall detection rate and positive predictive value. They both showed a progressive reduction (from 6.2‰ in 2006 to 4.5‰ in 2011 for DR and from 8.0% in 2006 to 5.2% in 2011 for PPV, respectively) at initial screening and a good, stable trend at subsequent screening. Activity volume analysis shows that in programmes with greater activity (test/year ≥10,000) RR at both initial and subsequent screening has a better performance. This is also true for DR and PPV where programmes with high volumes of activity do better, especially when compared with those that interpret fewer than 5,000 mammograms per year. In spite of a few limits, these results are reassuring, and they reward the efforts made by screening professionals. It is therefore important to continue to monitor screening indicators and suggest, test, and evaluate new strategies for continuous improvement.

CREDIT Performance Indicator Framework

DEFF Research Database (Denmark)

Frandsen, Anne Kathrine; Bertelsen, Niels Haldor; Haugbølle, Kim

2010-01-01

During the past two years the Nordic Baltic research project CREDIT (Construction and Real Estate – Developing Indicators for Transparency) has worked with the aim to improve transparency of value creation in building and real estate. One of the central deliverables of the CREDIT project was a fr......During the past two years the Nordic Baltic research project CREDIT (Construction and Real Estate – Developing Indicators for Transparency) has worked with the aim to improve transparency of value creation in building and real estate. One of the central deliverables of the CREDIT project...... was a framework of indicators relevant in building and real estate and applicable in the Nordic and Baltic countries as well as a proposal for a set of key indicators. The study resulting in CREDIT Performance Indicator Framework has been based on 28 case studies of evaluation practises in the building and real...... estate sector each addressing three interlinked levels: building/ projects level, company or enterprise level and benchmarking system level. Additionally it has been based on dialogue with researchers and professional organisation, international research and standardisation work and national building...

A New Performance Improvement Model: Adding Benchmarking to the Analysis of Performance Indicator Data.

Science.gov (United States)

Al-Kuwaiti, Ahmed; Homa, Karen; Maruthamuthu, Thennarasu

2016-01-01

A performance improvement model was developed that focuses on the analysis and interpretation of performance indicator (PI) data using statistical process control and benchmarking. PIs are suitable for comparison with benchmarks only if the data fall within the statistically accepted limit-that is, show only random variation. Specifically, if there is no significant special-cause variation over a period of time, then the data are ready to be benchmarked. The proposed Define, Measure, Control, Internal Threshold, and Benchmark model is adapted from the Define, Measure, Analyze, Improve, Control (DMAIC) model. The model consists of the following five steps: Step 1. Define the process; Step 2. Monitor and measure the variation over the period of time; Step 3. Check the variation of the process; if stable (no significant variation), go to Step 4; otherwise, control variation with the help of an action plan; Step 4. Develop an internal threshold and compare the process with it; Step 5.1. Compare the process with an internal benchmark; and Step 5.2. Compare the process with an external benchmark. The steps are illustrated through the use of health care-associated infection (HAI) data collected for 2013 and 2014 from the Infection Control Unit, King Fahd Hospital, University of Dammam, Saudi Arabia. Monitoring variation is an important strategy in understanding and learning about a process. In the example, HAI was monitored for variation in 2013, and the need to have a more predictable process prompted the need to control variation by an action plan. The action plan was successful, as noted by the shift in the 2014 data, compared to the historical average, and, in addition, the variation was reduced. The model is subject to limitations: For example, it cannot be used without benchmarks, which need to be calculated the same way with similar patient populations, and it focuses only on the "Analyze" part of the DMAIC model.

Sustainable Transport and Performance Indicators

DEFF Research Database (Denmark)

Gudmundsson, Henrik

2004-01-01

Sustainable transport has become a major policy concern in recent years. The term suggests a need to consider transport in a comprehensive perspective including the well-being of both present and future generations, and taking environmental, social and economic issues into account. Indicators...... in forecasting and tracking the performance of transport systems increasingly guide sustainable transport policy making. This review explores the implications of the sustainable transport” concept and how it can be made operational with indicators. A number of indicator systems are reviewed, and some strengths...

A Wireless Sensor Network for Structural Health Monitoring: Performance and Experience

OpenAIRE

Paek, Jeongyeup; Chintalapudi, Krishna; Caffrey, John; Govindan, Ramesh; Masri, Sami

2005-01-01

While sensor network research has made significant strides in the past few years, the literature has relatively few examples of papers that have evaluated and validated a complete experimental system. In this paper we discuss our deployment experiences and evaluate the performance of a multi-hop wireless data acquisition system (called Wisden) for structural health monitoring (SHM) on a large seismic test structure used by civil engineers. Our experiments indicate that, with the latest sensor...

Condenser performance monitoring and cleaning

International Nuclear Information System (INIS)

Walden, J.V.

1998-01-01

The main condenser at Ginna Station was retubed from admiralty brass to 316 stainless steel. A condenser performance monitoring spreadsheet was developed using EPRI guidelines after fouling was discovered. PEPSE computer models were used to determine the power loss and confirm the spreadsheet results. Cleaning of the condenser was performed using plastic scrubbers. Condenser performance improved dramatically following the cleaning. PEPSE, condenser spreadsheet performance, and actual observed plant data correlated well together. The fouling mechanism was determined to be a common lake bacteria and fungus growth which was combined with silt. Chlorination of the circulating water system at the allowable limits is keeping the biofouling under control

Comparison of remote sensing indices for monitoring of desert cienegas

Science.gov (United States)

Wilson, Natalie R.; Norman, Laura M.; Villarreal, Miguel; Gass, Leila; Tiller, Ron; Salywon, Andrew

2016-01-01

This research considers the applicability of different vegetation indices at 30 m resolution for mapping and monitoring desert wetland (cienega) health and spatial extent through time at Cienega Creek in southeastern Arizona, USA. Multiple stressors including the risk of decadal-scale drought, the effects of current and predicted global warming, and continued anthropogenic pressures threaten aquatic habitats in the southwest and cienegas are recognized as important sites for conservation and restoration efforts. However, cienegas present a challenge to satellite-imagery based analysis due to their small size and mixed surface cover of open water, exposed soils, and vegetation. We created time series of five well-known vegetation indices using annual Landsat Thematic Mapper (TM) images retrieved during the April–June dry season, from 1984 to 2011 to map landscape-level distribution of wetlands and monitor the temporal dynamics of individual sites. Indices included the Normalized Difference Vegetation Index (NDVI), the Soil-Adjusted Vegetation Index (SAVI), the Normalized Difference Water Index (NDWI), and the Normalized Difference Infrared Index (NDII). One topographic index, the Topographic Wetness Index (TWI), was analyzed to examine the utility of topography in mapping distribution of cienegas. Our results indicate that the NDII, calculated using Landsat TM band 5, outperforms the other indices at differentiating cienegas from riparian and upland sites, and was the best means to analyze change. As such, it offers a critical baseline for future studies that seek to extend the analysis of cienegas to other regions and time scales, and has broader applicability to the remote sensing of wetland features in arid landscapes.

Approaching Behaviour Monitor and Vibration Indication in Developing a General Moving Object Alarm System (GMOAS

Directory of Open Access Journals (Sweden)

Haiwei Dong

2013-07-01

Full Text Available People who suffer from hearing impairment caused by illness, age or extremely noisy environments are constantly in danger of being hit or knocked down by fast moving objects behind them when they have no companion or augmented sensory system to warn them. In this paper, we propose the General Moving Object Alarm System (GMOAS, a system focused on aiding the safe mobility of people under these circumstances. The GMOAS is a wearable haptic device that consists of two main subsystems: (i a moving object monitoring subsystem that uses laser range data to detect and track approaching objects, and (ii an alarm subsystem that warns the user of possibly dangerous approaching objects by triggering tactile vibrations on an “alarm necklace”. For moving object monitoring, we propose a simple yet efficient solution to monitor the approaching behavior of objects. Compared with previous work in motion detection and tracking, we are not interested in specific objects but any type of approaching object that might harm the user. To this extent, we define a boundary in the laser range data where the objects are monitored. Within this boundary a fan-shape grid is constructed to obtain an evenly distributed spatial partitioning of the data. These partitions are efficiently clustered into continuous objects which are then tracked through time using an object association algorithm based on updating a deviation matrix that represents angle, distance and size variations of the objects. The speed of the tracked objects is monitored throughout the algorithm. When the speed of an approaching object surpasses the safety threshold, the alarm necklace is triggered indicating the approaching direction of the fast moving object. The alarm necklace is equipped with three motors that can indicate five directions with respect to the user: left, back, right, left-back and right-back. We performed three types of outdoor experiments (object passing, approaching and crossing that

Strategies of performance self-monitoring in automotive production.

Science.gov (United States)

Faye, Hélène; Falzon, Pierre

2009-09-01

Production in the automotive industry, based on assembly line work, is now characterized by lean manufacturing and customization. This results in greater flexibility and increased quality demands, including worker performance self-monitoring. The objectives of this study are to refine the concept of performance self-monitoring and to characterize the strategies developed by operators to achieve it. Data were collected based on the method of individual auto-confrontation, consisting of two steps: eleven assembly-line operators of a French automotive company were individually observed and video-taped while they were working; an interview then allowed each operator to discuss his/her activity based on the video-tape. This study expands the concept of performance self-monitoring by highlighting three types of strategies directly oriented toward quality: prevention, feedback control and control action strategies.

Behavioral and electrophysiological evidence of enhanced performance monitoring in meditators

NARCIS (Netherlands)

Andreu, C.I.; Moënne-Loccoz, C.; López, V.; Slagter, H.A.; Franken, I.H.A.; Cosmelli, D.

2017-01-01

Performance monitoring—the ability to monitor ongoing performance to detect and correct errors—is a core component of cognitive control. Impairments in performance monitoring have been associated with several psychiatric disorders, including attention deficit hyperactivity disorder and substance use

School infrastructure performance indicator system (SIPIS)

CSIR Research Space (South Africa)

Gibberd, Jeremy T

2007-05-01

Full Text Available This paper describes the School Infrastructure Performance Indicator System (SIPIS) project which explores how an indicator system could be developed for school infrastructure in South Africa. It outlines the key challenges faced by the system...

Brain negativity as an indicator of predictive error processing: the contribution of visual action effect monitoring.

Science.gov (United States)

Joch, Michael; Hegele, Mathias; Maurer, Heiko; Müller, Hermann; Maurer, Lisa Katharina

2017-07-01

The error (related) negativity (Ne/ERN) is an event-related potential in the electroencephalogram (EEG) correlating with error processing. Its conditions of appearance before terminal external error information suggest that the Ne/ERN is indicative of predictive processes in the evaluation of errors. The aim of the present study was to specifically examine the Ne/ERN in a complex motor task and to particularly rule out other explaining sources of the Ne/ERN aside from error prediction processes. To this end, we focused on the dependency of the Ne/ERN on visual monitoring about the action outcome after movement termination but before result feedback (action effect monitoring). Participants performed a semi-virtual throwing task by using a manipulandum to throw a virtual ball displayed on a computer screen to hit a target object. Visual feedback about the ball flying to the target was masked to prevent action effect monitoring. Participants received a static feedback about the action outcome (850 ms) after each trial. We found a significant negative deflection in the average EEG curves of the error trials peaking at ~250 ms after ball release, i.e., before error feedback. Furthermore, this Ne/ERN signal did not depend on visual ball-flight monitoring after release. We conclude that the Ne/ERN has the potential to indicate error prediction in motor tasks and that it exists even in the absence of action effect monitoring. NEW & NOTEWORTHY In this study, we are separating different kinds of possible contributors to an electroencephalogram (EEG) error correlate (Ne/ERN) in a throwing task. We tested the influence of action effect monitoring on the Ne/ERN amplitude in the EEG. We used a task that allows us to restrict movement correction and action effect monitoring and to control the onset of result feedback. We ascribe the Ne/ERN to predictive error processing where a conscious feeling of failure is not a prerequisite. Copyright © 2017 the American Physiological

Performance Indicators of Operating Reactors

Data.gov (United States)

Nuclear Regulatory Commission — A list of Performance Indicators (PI) that are reported to the NRC by licensees at the end of each quarter in accordance with Inspection Manual Chapters (IMC) 0608,...

Corporate performance indicators: The case of universities

Directory of Open Access Journals (Sweden)

Bakae Aubrey Mokoena

2016-11-01

Full Text Available This paper re-examines the long-standing and unresolved debate regarding the use of performance indicators in higher education. This paper aims to identify the primary variables that comprise university performance from the perspectives of academics within universities of technology in South Africa. A structured questionnaire was administered to a conveniently selected sample of 507 academics recruited from five universities of technology in South Africa. Using the exploratory factor analysis technique, five indicators were used as sub-dimensions to measure university performance were identified. These were 1 recognition, 2 image, 3 collaboration, 4 spin-off, 5 employability and 6 research. Overall, the research results suggests that these five performance indicators can assist South Africa’s universities of technology to achieve a higher level of institutional performance. The boards responsible for running universities of technology should consider which strategic management approaches they are currently utilising and streamline them to cement their competitive advantage and superior performance.

Sustainable Transport and Performance Indicators

DEFF Research Database (Denmark)

Gudmundsson, H.

2004-01-01

ustainable transport has become a major policy concern in recent years. The term suggests a need to consider transport in a comprehensive perspective including the well-being of both present and future generations, and taking environmental, social and economic issues into account. Indicators...... in forecasting and tracking the performance of transport systems increasingly guide sustainable transport policy making. This review explores the implications of the "sustainable transport" concept and how it can be made operational with indicators. A number of indicator systems are reviewed, and some strengths...... and weaknesses are highlighted with regard to the support they provide for sustainable transport development....

A systematic review of the cost of data collection for performance monitoring in hospitals.

Science.gov (United States)

Jones, Cheryl; Gannon, Brenda; Wakai, Abel; O'Sullivan, Ronan

2015-04-01

Key performance indicators (KPIs) are used to identify where organisational performance is meeting desired standards and where performance requires improvement. Valid and reliable KPIs depend on the availability of high-quality data, specifically the relevant minimum data set ((MDS) the core data identified as the minimum required to measure performance for a KPI) elements. However, the feasibility of collecting the relevant MDS elements is always a limitation of performance monitoring using KPIs. Preferably, data should be integrated into service delivery, and, where additional data are required that are not currently collected as part of routine service delivery, there should be an economic evaluation to determine the cost of data collection. The aim of this systematic review was to synthesise the evidence base concerning the costs of data collection in hospitals for performance monitoring using KPI, and to identify hospital data collection systems that have proven to be cost minimising. We searched MEDLINE (1946 to May week 4 2014), Embase (1974 to May week 2 2014), and CINAHL (1937 to date). The database searches were supplemented by searching for grey literature through the OpenGrey database. Data was extracted, tabulated, and summarised as part of a narrative synthesis. The searches yielded a total of 1,135 publications. After assessing each identified study against specific inclusion exclusion criteria only eight studies were deemed as relevant for this review. The studies attempt to evaluate different types of data collection interventions including the installation of information communication technology (ICT), improvements to current ICT systems, and how different analysis techniques may be used to monitor performance. The evaluation methods used to measure the costs and benefits of data collection interventions are inconsistent across the identified literature. Overall, the results weakly indicate that collection of hospital data and improvements in data

Selection and Use of Performance Indicators in Decommissioning

International Nuclear Information System (INIS)

2011-01-01

The success of completing a decommissioning project on schedule and budget is determined by the ability to define a clear endpoint (outcome), to accurately determine intermediate progress, and develop reliable forecasts to complete remaining tasks. Performance indicators are used to examine those aspects that are crucial to this success. This information is required by and periodically reported to various stakeholders. Although the practice of nuclear decommissioning is maturing, it would benefit from optimal use of performance indicators. Performance measurement is the 'heart and soul' of the performance based management process. Flowing from the organizational mission and the strategic planning process, it provides the data that will be collected, analysed, reported and ultimately, used to make sound business decisions. It directs the business function by documenting progress towards established objectives, identifying areas of both strength and weakness, and justifying budgetary expenditures. In this report, practical advice is provided on the effective use of performance indicators to measure and report on the achievement of the goals and plans of a nuclear decommissioning project. The structure of the report takes the reader progressively through all aspects of designing, selecting and using performance indicators. A process for setting up a performance indicator system against basic principles is presented, including a discussion of each step in the process. The report also provides an expanded discussion of the most important influences on the identification and selection of performance indicators. Finally, practical guidance on the use of performance indicators in specific Member States is provided together with field experience.

Using templates and linguistic patterns to define process performance indicators

Science.gov (United States)

del-Río-Ortega, Adela; Resinas, Manuel; Durán, Amador; Ruiz-Cortés, Antonio

2016-02-01

Process performance management (PPM) aims at measuring, monitoring and analysing the performance of business processes (BPs), in order to check the achievement of strategic and operational goals and to support decision-making for their optimisation. PPM is based on process performance indicators (PPIs), so having an appropriate definition of them is crucial. One of the main problems of PPIs definition is to express them in an unambiguous, complete, understandable, traceable and verifiable manner. In practice, PPIs are defined informally - usually in ad hoc, natural language, with its well-known problems - or they are defined from an implementation perspective, hardly understandable to non-technical people. In order to solve this problem, in this article we propose a novel approach to improve the definition of PPIs using templates and linguistic patterns. This approach promotes reuse, reduces both ambiguities and missing information, is understandable to all stakeholders and maintains traceability with the process model. Furthermore, it enables the automated processing of PPI definitions by its straightforward translation into the PPINOT metamodel, allowing the gathering of the required information for their computation as well as the analysis of the relationships between them and with BP elements.

14 CFR 152.319 - Monitoring and reporting of program performance.

Science.gov (United States)

2010-01-01

... performance. 152.319 Section 152.319 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Accounting and Reporting Requirements § 152.319 Monitoring and reporting of program performance. (a) The sponsor or planning agency shall monitor performance...

Runtime Performance Monitoring Tool for RTEMS System Software

Science.gov (United States)

Cho, B.; Kim, S.; Park, H.; Kim, H.; Choi, J.; Chae, D.; Lee, J.

2007-08-01

RTEMS is a commercial-grade real-time operating system that supports multi-processor computers. However, there are not many development tools for RTEMS. In this paper, we report new RTEMS-based runtime performance monitoring tool. We have implemented a light weight runtime monitoring task with an extension to the RTEMS APIs. Using our tool, software developers can verify various performance- related parameters during runtime. Our tool can be used during software development phase and in-orbit operation as well. Our implemented target agent is light weight and has small overhead using SpaceWire interface. Efforts to reduce overhead and to add other monitoring parameters are currently under research.

Developing an Indicator System for Monitoring, Analyzing, and Assessing Airport Sustainability

NARCIS (Netherlands)

Janic, M.

2010-01-01

This paper deals with developing an indicator system for monitoring, analyzing, and assessing sustainability of airports. The sustainability implies simultaneous increasing of the overall socialeconomic benefits and increasing at a slower rate, stagnating, and/or diminishing of the negative impacts

Indicators and protocols for monitoring impacts of formal and informal trails in protected areas

Science.gov (United States)

Marion, Jeffrey L.; Leung, Yu-Fai

2011-01-01

Trails are a common recreation infrastructure in protected areas and their conditions affect the quality of natural resources and visitor experiences. Various trail impact indicators and assessment protocols have been developed in support of monitoring programs, which are often used for management decision-making or as part of visitor capacity management frameworks. This paper reviews common indicators and assessment protocols for three types of trails, surfaced formal trails, unsurfaced formal trails, and informal (visitor-created) trails. Monitoring methods and selected data from three U.S. National Park Service units are presented to illustrate some common trail impact indicators and assessment options.

Who can monitor the court interpreter's performance?

DEFF Research Database (Denmark)

Martinsen, Bodil

2009-01-01

and the conflict about her competence was negotiated. Because of this unusual constellation, combined with a multi-method approach, this single case study can shed some light on the question of the participants' ability to monitor the interpreter's performance. Legal professional users of interpreters tend......  Who can monitor the court interpreter's performance? Results of a case study This paper presents the results of a case study of an unusual interpreting event in a Danish courtroom setting. During the trial, the interpreter's non-normative performance was explicitly criticised by the audience...... are far less transparent for the legal participants than they normally assume. This problem, in turn, stresses the importance of a) the interpreter's competence and self-awareness and b) the use of check interpreters.  ...

Performance monitoring and analysis of task-based OpenMP.

Directory of Open Access Journals (Sweden)

Yi Ding

Full Text Available OpenMP, a typical shared memory programming paradigm, has been extensively applied in high performance computing community due to the popularity of multicore architectures in recent years. The most significant feature of the OpenMP 3.0 specification is the introduction of the task constructs to express parallelism at a much finer level of detail. This feature, however, has posed new challenges for performance monitoring and analysis. In particular, task creation is separated from its execution, causing the traditional monitoring methods to be ineffective. This paper presents a mechanism to monitor task-based OpenMP programs with interposition and proposes two demonstration graphs for performance analysis as well. The results of two experiments are discussed to evaluate the overhead of monitoring mechanism and to verify the effects of demonstration graphs using the BOTS benchmarks.

Technical indicators of financial performance in the dairy herd

DEFF Research Database (Denmark)

Kristensen, Erling Lundager; Østergaard, Søren; Krogh, Mogens Agerbo

2008-01-01

Monte Carlo simulation was used to predict the long-term financial performance related to the technical performance of dairy herds. The indicators addressed were derived from data collected routinely in the herd. They indicated technical performance that can be affected by the farmer...... or the consultant, and they were derived from expected cause-effect relations between technical performance and financial performance at the herd level. The study included the indicators shape of lactation curve, reproduction efficiency, heifer management, variation between cows in lactation curve persistency...... cow was analyzed as the measure of financial performance. The potential effects of the selected indicators on the gross margin were estimated by means of an ANOVA. The final model allowed estimation of the financial value of specific changes within the key performance indicators. This study indicated...

Perfmon2: a leap forward in performance monitoring

International Nuclear Information System (INIS)

Jarp, S; Jurga, R; Nowak, A

2008-01-01

This paper describes the software component, perfmon2, that is about to be added to the Linux kernel as the standard interface to the Performance Monitoring Unit (PMU) on common processors, including x86 (AMD and Intel), Sun SPARC, MIPS, IBM Power and Intel Itanium. It also describes a set of tools for doing performance monitoring in practice and details how the CERN openlab team has participated in the testing and development of these tools

Perfmon2: a leap forward in performance monitoring

Energy Technology Data Exchange (ETDEWEB)

Jarp, S; Jurga, R; Nowak, A [CERN, Geneva (Switzerland)], E-mail: Sverre.Jarp@cern.ch

2008-07-15

This paper describes the software component, perfmon2, that is about to be added to the Linux kernel as the standard interface to the Performance Monitoring Unit (PMU) on common processors, including x86 (AMD and Intel), Sun SPARC, MIPS, IBM Power and Intel Itanium. It also describes a set of tools for doing performance monitoring in practice and details how the CERN openlab team has participated in the testing and development of these tools.

Perfmon2 a leap forward in performance monitoring

CERN Document Server

Jarp, S; Nowak, A

2008-01-01

This paper describes the software component, perfmon2, that is about to be added to the Linux kernel as the standard interface to the Performance Monitoring Unit (PMU) on common processors, including x86 (AMD and Intel), Sun SPARC, MIPS, IBM Power and Intel Itanium. It also describes a set of tools for doing performance monitoring in practice and details how the CERN openlab team has participated in the testing and development of these tools.

Perfmon2: a leap forward in performance monitoring

Science.gov (United States)

Jarp, S.; Jurga, R.; Nowak, A.

2008-07-01

This paper describes the software component, perfmon2, that is about to be added to the Linux kernel as the standard interface to the Performance Monitoring Unit (PMU) on common processors, including x86 (AMD and Intel), Sun SPARC, MIPS, IBM Power and Intel Itanium. It also describes a set of tools for doing performance monitoring in practice and details how the CERN openlab team has participated in the testing and development of these tools.

Alignment performance monitoring for ASML systems

Science.gov (United States)

Chung, Woong-Jae; Temchenko, Vlad; Hauck, Tarja; Schmidt, Sebastian

2006-03-01

In today's semiconductor industry downscaling of the IC design puts a stringent requirement on pattern overlay control. Tighter overlay requirements lead to exceedingly higher rework rates, meaning additional costs to manufacturing. Better alignment control became a target of engineering efforts to decrease rework rate for high-end technologies. Overlay performance is influenced by known parameters such as "Shift, Scaling, Rotation, etc", and unknown parameters defined as "Process Induced Variation", which are difficult to control by means of a process automation system. In reality, this process-induced variation leads to a strong wafer to wafer, or lot to lot variation, which are not easy to detect in the mass-production environment which uses sampling overlay measurements for only several wafers in a lot. An engineering task of finding and correcting a root cause for Process Induced Variations of overlay performance will be greatly simplified if the unknown parameters could be tracked for each wafer. This paper introduces an alignment performance monitoring method based on analysis of automatically generated "AWE" files for ASML scanner systems. Because "AWE" files include alignment results for each aligned wafer, it is possible to use them for monitoring, controlling and correcting the causes of "process induced" overlay performance without requiring extra measurement time. Since "AWE" files include alignment information for different alignment marks, it is also possible to select and optimize the best alignment recipe for each alignment strategy. Several case studies provided in our paper will demonstrate how AWE file analysis can be used to assist engineer in interpreting pattern alignment data. Since implementing our alignment data monitoring method, we were able to achieve significant improvement of alignment and overlay performance without additional overlay measurement time. We also noticed that the rework rate coming from alignment went down and

Multileaf collimator performance monitoring and improvement using semiautomated quality control testing and statistical process control

International Nuclear Information System (INIS)

Létourneau, Daniel; McNiven, Andrea; Keller, Harald; Wang, An; Amin, Md Nurul; Pearce, Jim; Norrlinger, Bernhard; Jaffray, David A.

2014-01-01

Purpose: High-quality radiation therapy using highly conformal dose distributions and image-guided techniques requires optimum machine delivery performance. In this work, a monitoring system for multileaf collimator (MLC) performance, integrating semiautomated MLC quality control (QC) tests and statistical process control tools, was developed. The MLC performance monitoring system was used for almost a year on two commercially available MLC models. Control charts were used to establish MLC performance and assess test frequency required to achieve a given level of performance. MLC-related interlocks and servicing events were recorded during the monitoring period and were investigated as indicators of MLC performance variations. Methods: The QC test developed as part of the MLC performance monitoring system uses 2D megavoltage images (acquired using an electronic portal imaging device) of 23 fields to determine the location of the leaves with respect to the radiation isocenter. The precision of the MLC performance monitoring QC test and the MLC itself was assessed by detecting the MLC leaf positions on 127 megavoltage images of a static field. After initial calibration, the MLC performance monitoring QC test was performed 3–4 times/week over a period of 10–11 months to monitor positional accuracy of individual leaves for two different MLC models. Analysis of test results was performed using individuals control charts per leaf with control limits computed based on the measurements as well as two sets of specifications of ±0.5 and ±1 mm. Out-of-specification and out-of-control leaves were automatically flagged by the monitoring system and reviewed monthly by physicists. MLC-related interlocks reported by the linear accelerator and servicing events were recorded to help identify potential causes of nonrandom MLC leaf positioning variations. Results: The precision of the MLC performance monitoring QC test and the MLC itself was within ±0.22 mm for most MLC leaves

Multileaf collimator performance monitoring and improvement using semiautomated quality control testing and statistical process control.

Science.gov (United States)

Létourneau, Daniel; Wang, An; Amin, Md Nurul; Pearce, Jim; McNiven, Andrea; Keller, Harald; Norrlinger, Bernhard; Jaffray, David A

2014-12-01

High-quality radiation therapy using highly conformal dose distributions and image-guided techniques requires optimum machine delivery performance. In this work, a monitoring system for multileaf collimator (MLC) performance, integrating semiautomated MLC quality control (QC) tests and statistical process control tools, was developed. The MLC performance monitoring system was used for almost a year on two commercially available MLC models. Control charts were used to establish MLC performance and assess test frequency required to achieve a given level of performance. MLC-related interlocks and servicing events were recorded during the monitoring period and were investigated as indicators of MLC performance variations. The QC test developed as part of the MLC performance monitoring system uses 2D megavoltage images (acquired using an electronic portal imaging device) of 23 fields to determine the location of the leaves with respect to the radiation isocenter. The precision of the MLC performance monitoring QC test and the MLC itself was assessed by detecting the MLC leaf positions on 127 megavoltage images of a static field. After initial calibration, the MLC performance monitoring QC test was performed 3-4 times/week over a period of 10-11 months to monitor positional accuracy of individual leaves for two different MLC models. Analysis of test results was performed using individuals control charts per leaf with control limits computed based on the measurements as well as two sets of specifications of ± 0.5 and ± 1 mm. Out-of-specification and out-of-control leaves were automatically flagged by the monitoring system and reviewed monthly by physicists. MLC-related interlocks reported by the linear accelerator and servicing events were recorded to help identify potential causes of nonrandom MLC leaf positioning variations. The precision of the MLC performance monitoring QC test and the MLC itself was within ± 0.22 mm for most MLC leaves and the majority of the

Cernavoda NPP Unit 1: Operating experience program and plant specific performance indicators (level 2)

International Nuclear Information System (INIS)

Teodor, Vasile; Popa, Viorel

1998-01-01

The basis for the Operating Experience Program was set in place since early stages of the commissioning phase (1993), when a system based on the Canadian approach was implemented for reporting, reviewing, assessing and establishing of the necessary corrective action for unplanned events. This system provided excellent opportunity to train staff in unplanned event assessment methodology, and prepare the station for the formal reporting process following criticality in accordance with the licensing requirements. The formal process, set in place after criticality is described in Station Instruction Procedure SI-01365-P13 'Unplanned Event Report' and was developed under the supervision of Safety and Compliance Department. In parallel, a program for information exchange and trending of performance indicators was developed by Technical Services Department. The WANO recommendations following August 1997 Peer Review provided the opportunity for a better understanding and reconsideration of the Operating Experience Program. As a result, all the activities related to this topic were assigned to a new structure, within Safety and Compliance Department. As such an Operating Experience Group was created and a new program is now being developed in an integrated and centralized manner. The content of the paper is the following: - Overview; - Operating Experience Program; - Event Analysis (Unplanned Events Assessment System - UEIR Process- and Systematic Analysis of Operational Events - ACR Process); - Information Exchange Program; - Monitoring of Operating Experience - Plant Specific Performance Indicators; - Purpose; - Level 2 Performance Indicators. Four appendices are added containing: - A. Station performance indicators/targets (Level 2); - B. SPI (Station Performance Indicators - Level 2) - Graphics; - C. UEIR, LRS (Safety and Licensing Review Sheet), UEFR (Unplanned Event Follow-up Report), ACR and OPEX forms. (authors)

A survey on exploring key performance indicators

Directory of Open Access Journals (Sweden)

Mohammed Badawy

2016-12-01

Full Text Available Key Performance Indicators (KPIs allows gathering knowledge and exploring the best way to achieve organization goals. Many researchers have provided different ideas for determining KPI's either manually, and semi-automatic, or automatic which is applied in different fields. This work concentrates on providing a survey of different approaches for exploring and predicting key performance indicators (KPIs.

Monitoring Instrument Performance in Regional Broadband Seismic Network Using Ambient Seismic Noise

Science.gov (United States)

Ye, F.; Lyu, S.; Lin, J.

2017-12-01

In the past ten years, the number of seismic stations has increased significantly, and regional seismic networks with advanced technology have been gradually developed all over the world. The resulting broadband data help to improve the seismological research. It is important to monitor the performance of broadband instruments in a new network in a long period of time to ensure the accuracy of seismic records. Here, we propose a method that uses ambient noise data in the period range 5-25 s to monitor instrument performance and check data quality in situ. The method is based on an analysis of amplitude and phase index parameters calculated from pairwise cross-correlations of three stations, which provides multiple references for reliable error estimates. Index parameters calculated daily during a two-year observation period are evaluated to identify stations with instrument response errors in near real time. During data processing, initial instrument responses are used in place of available instrument responses to simulate instrument response errors, which are then used to verify our results. We also examine feasibility of the tailing noise using data from stations selected from USArray in different locations and analyze the possible instrumental errors resulting in time-shifts used to verify the method. Additionally, we show an application that effects of instrument response errors that experience pole-zeros variations on monitoring temporal variations in crustal properties appear statistically significant velocity perturbation larger than the standard deviation. The results indicate that monitoring seismic instrument performance helps eliminate data pollution before analysis begins.

Social Performance vs. Financial Performance: CSR Disclosures as an indicator of social performance

Directory of Open Access Journals (Sweden)

İlker Yılmaz

2013-04-01

Full Text Available In recent decades, it is gaining more and more dominance in both academic and business life that the company exists for and has responsibilities toward a wider group of stakeholders and it must have some objectives other than profitability. To achieve sustainable development and growth, the companies must assume more duties, which is called the term “corporate social responsibility (CSR.” In the literature, it is questioned whether CSR activities benefit the company or not; whether there is any relationship exists between CSR activities and the company’s financial performance and the direction of the relationship. We aimed to explore that whether there is any effect corporate social performance (CSP on financial performance and position and vice versa. We performed content analysis through annual reports and derived a social score composed of the items included in disclosure guidelines and some criteria used in CSR ratings. We also used several financial position and financial performance indicators. In order to explore the relationship between CSP and financial indicators, we run panel data regressions. We found significant results for some of the indicators, where some of the indicators gave insignificant results. The reporting of CSR activities is in very low levels. The conscious toward CSR and sustainability must be promoted and the companies must assume more active roles. The reporting of those activities is also important.

Power analysis as a tool to identify statistically informative indicators for monitoring coral reef disturbances.

Science.gov (United States)

Van Wynsberge, Simon; Gilbert, Antoine; Guillemot, Nicolas; Heintz, Tom; Tremblay-Boyer, Laura

2017-07-01

Extensive biological field surveys are costly and time consuming. To optimize sampling and ensure regular monitoring on the long term, identifying informative indicators of anthropogenic disturbances is a priority. In this study, we used 1800 candidate indicators by combining metrics measured from coral, fish, and macro-invertebrate assemblages surveyed from 2006 to 2012 in the vicinity of an ongoing mining project in the Voh-Koné-Pouembout lagoon, New Caledonia. We performed a power analysis to identify a subset of indicators which would best discriminate temporal changes due to a simulated chronic anthropogenic impact. Only 4% of tested indicators were likely to detect a 10% annual decrease of values with sufficient power (>0.80). Corals generally exerted higher statistical power than macro-invertebrates and fishes because of lower natural variability and higher occurrence. For the same reasons, higher taxonomic ranks provided higher power than lower taxonomic ranks. Nevertheless, a number of families of common sedentary or sessile macro-invertebrates and fishes also performed well in detecting changes: Echinometridae, Isognomidae, Muricidae, Tridacninae, Arcidae, and Turbinidae for macro-invertebrates and Pomacentridae, Labridae, and Chaetodontidae for fishes. Interestingly, these families did not provide high power in all geomorphological strata, suggesting that the ability of indicators in detecting anthropogenic impacts was closely linked to reef geomorphology. This study provides a first operational step toward identifying statistically relevant indicators of anthropogenic disturbances in New Caledonia's coral reefs, which can be useful in similar tropical reef ecosystems where little information is available regarding the responses of ecological indicators to anthropogenic disturbances.

Electronic adherence monitoring device performance and patient acceptability: a randomized control trial.

Science.gov (United States)

Chan, Amy Hai Yan; Stewart, Alistair William; Harrison, Jeff; Black, Peter Nigel; Mitchell, Edwin Arthur; Foster, Juliet Michelle

2017-05-01

To investigate the performance and patient acceptability of an inhaler electronic monitoring device in a real-world childhood asthma population. Children 6 to 15 years presenting with asthma to the hospital emergency department and prescribed inhaled corticosteroids were included. Participants were randomized to receive a device with reminder features enabled or disabled for use with their preventer. Device quality control tests were conducted. Questionnaires on device acceptability, utility and ergonomics were completed at six months. A total of 1306 quality control tests were conducted; 84% passed pre-issue and 87% return testing. The most common failure reason was actuation under-recording. Acceptability scores were high, with higher scores in the reminder than non-reminder group (median, 5 th -95 th percentile: 4.1, 3.1-5.0 versus 3.7, 2.3-4.8; p 90%) rated the device easy to use. Feedback was positive across five themes: device acceptability, ringtone acceptability, suggestions for improvement, effect on medication use, and effect on asthma control. This study investigates electronic monitoring device performance and acceptability in children using quantitative and qualitative measures. Results indicate satisfactory reliability, although failure rates of 13-16% indicate the importance of quality control. Favorable acceptability ratings support the use of these devices in children.

Developing Emergency Room Key Performance Indicators: What to Measure and Why Should We Measure It?

Science.gov (United States)

Khalifa, Mohamed; Zabani, Ibrahim

2016-01-01

Emergency Room (ER) performance has been a timely topic for both healthcare practitioners and researchers. King Faisal Specialist Hospital and Research Center, Saudi Arabia worked on developing a comprehensive set of KPIs to monitor, evaluate and improve the performance of the ER. A combined approach using quantitative and qualitative methods was used to collect and analyze the data. 34 KPIs were developed and sorted into the three components of the ER patient flow model; input, throughput and output. Input indicators included number and acuity of ER patients, patients leaving without being seen and revisit rates. Throughput indicators included number of active ER beds, ratio of ER patients to ER staff and the length of stay including waiting time and treatment time. The turnaround time of supportive services, such as lab, radiology and medications, were also included. Output indicators include boarding time and available hospital beds, ICU beds and patients waiting for admission.

Dashboard and Firms Performance Optimization Using Piloting Indicators

Directory of Open Access Journals (Sweden)

Sorinel Capusneanu

2006-07-01

Full Text Available Can we analyze the enterprise performances upon the pilot indicators? The answer is completed by analyzing and interpreting the suggested indicators. Finally, these indicators will form the enterprise dashboard, which the management will take the right decisions. The dashboard represents the selection and presentation way of pilot indicators which permit tendencies visualization leaving from enterprise’s followed objectives. Through analyses and interpretation of pilot indicators, it is generating actions which contribute to enterprise’s improvement performances.

Measuring Healthcare Providers' Performances Within Managed Competition Using Multidimensional Quality and Cost Indicators.

Science.gov (United States)

Portrait, France R M; van der Galiën, Onno; Van den Berg, Bernard

2016-04-01

The Dutch healthcare system is in transition towards managed competition. In theory, a system of managed competition involves incentives for quality and efficiency of provided care. This is mainly because health insurers contract on behalf of their clients with healthcare providers on, potentially, quality and costs. The paper develops a strategy to comprehensively analyse available multidimensional data on quality and costs to assess and report on the relative performance of healthcare providers within managed competition. We had access to individual information on 2409 clients of 19 Dutch diabetes care groups on a broad range of (outcome and process related) quality and cost indicators. We carried out a cost-consequences analysis and corrected for differences in case mix to reduce incentives for risk selection by healthcare providers. There is substantial heterogeneity between diabetes care groups' performances as measured using multidimensional indicators on quality and costs. Better quality diabetes care can be achieved with lower or higher costs. Routine monitoring using multidimensional data on quality and costs merged at the individual level would allow a systematic and comprehensive analysis of healthcare providers' performances within managed competition. Copyright © 2015 John Wiley & Sons, Ltd.

Electromagnetic fields and health impact: measurements, monitoring and environmental indicators

International Nuclear Information System (INIS)

Lubritto, C.; Vetromile, C.; Petraglia, A.; Racioppoli, M.; D'Onofrio, A.

2008-01-01

Full text: During the last 10 years there has been a remarkable growth of the attention for problems related to the electromagnetic pollution, motivated by the alert connected to potential risk for the health of persons and due to the increasing diffusion of Bats for mobile telecommunication as EMF sources. Many projects are being realized about the environmental and health impact of electromagnetic field and an important social role is played by specific actions to minimize the risk perception of the population. This study aims to find an innovative approach to these problems through the use of a system of continuous time monitoring of the electromagnetic fields and the individuation of appropriate environmental indicators. The proposed system monitors the electromagnetic fields continuously over time, and is already operating in many southern Italian cities. It works in a very efficient way as a mean for: a) Info to the citizens, thanks to diffusion of daily collected data on Internet Web; b) Control for local administrations and Authorities, due to capability of the system itself to alert when measured values exceed the limits reported by the Italian laws; c) Planning, for the implementation of : 1) New procedures agreed among local environmental control agency, local administrations and mobile Companies for network planning and management of alarm situations; 2) New local guidelines documents concerning the installation and operation of telecommunications apparatus. Moreover, starting from the general principles of the Strategic Environmental Evaluation (VAS), the environmental impacts of EMS field is studied. Based on the model DPSIR (Drivers, Pressure, State, Impacts, Responses), 12 environmental indicators have been chosen providing an immediate and understandable tool to obtain very important information on electromagnetic pollution generated by radio-telecommunication systems. The selected environmental indicators have been applied to 11 cities of the

JACoW Automatic PID performance monitoring applied to LHC cryogenics

CERN Document Server

Bradu, Benjamin; Marti, Ruben; Tilaro, Filippo

2018-01-01

At CERN, the LHC (Large Hadron Collider) cryogenic system employs about 5000 PID (Proportional Integral Derivative) regulation loops distributed over the 27 km of the accelerator. Tuning all these regulation loops is a complex task and the systematic monitoring of them should be done in an automated way to be sure that the overall plant performance is improved by identifying the poorest performing PID controllers. It is nearly impossible to check the performance of a regulation loop with a classical threshold technique as the controlled variables could evolve in large operation ranges and the amount of data cannot be manually checked daily. This paper presents the adaptation and the application of an existing regulation indicator performance algorithm on the LHC cryogenic system and the different results obtained in the past year of operation. This technique is generic for any PID feedback control loop, it does not use any process model and needs only a few tuning parameters. The publication also describes th...

Computer-aided performance monitoring program at Diablo Canyon

International Nuclear Information System (INIS)

Nelson, T.; Glynn, R. III; Kessler, T.C.

1992-01-01

This paper describes the thermal performance monitoring program at Pacific Gas ampersand Electric Company's (PG ampersand E's) Diablo Canyon Nuclear Power Plant. The plant performance monitoring program at Diablo Canyon uses the THERMAC performance monitoring and analysis computer software provided by Expert-EASE Systems. THERMAC is used to collect performance data from the plant process computers, condition that data to adjust for measurement errors and missing data points, evaluate cycle and component-level performance, archive the data for trend analysis and generate performance reports. The current status of the program is that, after a fair amount of open-quotes tuningclose quotes of the basic open-quotes thermal kitclose quotes models provided with the initial THERMAC installation, we have successfully baselined both units to cycle isolation test data from previous reload cycles. Over the course of the past few months, we have accumulated enough data to generate meaningful performance trends and, as a result, have been able to use THERMAC to track a condenser fouling problem that was costing enough megawatts to attract corporate-level attention. Trends from THERMAC clearly related the megawatt loss to a steadily degrading condenser cleanliness factor and verified the subsequent gain in megawatts after the condenser was cleaned. In the future, we expect to rebaseline THERMAC to a beginning of cycle (BOC) data set and to use the program to help track feedwater nozzle fouling

The Advanced Monitoring Systems Initiative--Performance Monitoring for DOE Environmental Remediation and Contaminant Containment

Science.gov (United States)

Haas, W. J.; Venedam, R. J.; Lohrstorfer, C. F.; Weeks, S. J.

2005-05-01

The Advanced Monitoring System Initiative (AMSI) is a new approach to accelerate the development and application of advanced sensors and monitoring systems in support of Department of Energy needs in monitoring the performance of environmental remediation and contaminant containment activities. The Nevada Site Office of the National Nuclear Security Administration (NNSA) and Bechtel Nevada manage AMSI, with funding provided by the DOE Office of Environmental Management (DOE EM). AMSI has easy access to unique facilities and capabilities available at the Nevada Test Site (NTS), including the Hazardous Materials (HazMat) Spill Center, a one-of-a-kind facility built and permitted for releases of hazardous materials for training purposes, field-test detection, plume dispersion experimentation, and equipment and materials testing under controlled conditions. AMSI also has easy access to the facilities and considerable capabilities of the DOE and NNSA National Laboratories, the Special Technologies Laboratory, Remote Sensing Laboratory, Desert Research Institute, and Nevada Universities. AMSI provides rapid prototyping, systems integration, and field-testing, including assistance during initial site deployment. The emphasis is on application. Important features of the AMSI approach are: (1) customer investment, involvement and commitment to use - including definition of needs, desired mode of operation, and performance requirements; and (2) employment of a complete systems engineering approach, which allows the developer to focus maximum attention on the essential new sensing element or elements while AMSI assumes principal responsibility for infrastructure support elements such as power, packaging, and general data acquisition, control, communication, visualization and analysis software for support of decisions. This presentation describes: (1) the needs for sensors and performance monitoring for environmental systems as seen by the DOE Long Term Stewardship Science and

Measuring coverage in MNCH: challenges and opportunities in the selection of coverage indicators for global monitoring.

Directory of Open Access Journals (Sweden)

Jennifer Harris Requejo

Full Text Available Global monitoring of intervention coverage is a cornerstone of international efforts to improve reproductive, maternal, newborn, and child health. In this review, we examine the process and implications of selecting a core set of coverage indicators for global monitoring, using as examples the processes used by the Countdown to 2015 for Maternal, Newborn and Child Survival and the Commission on Accountability for Women's and Children's Health. We describe how the generation of data for global monitoring involves five iterative steps: development of standard indicator definitions and measurement approaches to ensure comparability across countries; collection of high-quality data at the country level; compilation of country data at the global level; organization of global databases; and rounds of data quality checking. Regular and rigorous technical review processes that involve high-level decision makers and experts familiar with indicator measurement are needed to maximize uptake and to ensure that indicators used for global monitoring are selected on the basis of available evidence of intervention effectiveness, feasibility of measurement, and data availability as well as programmatic relevance. Experience from recent initiatives illustrates the challenges of striking this balance as well as strategies for reducing the tensions inherent in the indicator selection process. We conclude that more attention and continued investment need to be directed to global monitoring, to support both the process of global database development and the selection of sets of coverage indicators to promote accountability. The stakes are high, because these indicators can drive policy and program development at the country and global level, and ultimately impact the health of women and children and the communities where they live.

Experimental Adaptive Digital Performance Monitoring for Optical DP-QPSK Coherent Receiver

DEFF Research Database (Denmark)

Borkowski, Robert; Zhang, Xu; Zibar, Darko

2011-01-01

We report on a successful experimental demonstration of a digital optical performance monitoring (OPM) yielding satisfactory estimation accuracy along with adaptive impairment equalization. No observable penalty is measured when equalizer is driven by monitoring module.......We report on a successful experimental demonstration of a digital optical performance monitoring (OPM) yielding satisfactory estimation accuracy along with adaptive impairment equalization. No observable penalty is measured when equalizer is driven by monitoring module....

Study on the operational safety performance indicator of nuclear power plants in China

International Nuclear Information System (INIS)

Zhou Shirong

2005-01-01

The operational Safety Performance Indicator system (SPI) has been more and more regarded recently for their clear and effective characteristic in safety assessment for Nuclear Power Plants (NPPs). A large developing plan for NPPs construction is being discussed and considered in P.R. China. As one of important nuclear country, China expects to ensure the normal operation of NPPs and improve the safety level. National Nuclear Safety Administration (NNSA), National Nuclear Regulatory Agency of China, has put high attention on safety and SPI area, and many endeavours and attempts have been done or being carried out for an establishment of SPI system in China. NNSA intends to build an integrated SPI system to monitor all of the NPPs operation in China, based on the SPI system currently used in the world. NNSA believes that the SPI system will help to more effectively enforce the function of surveillance and management. The paper will introduces the status of study on the operational safety performance indicator of Nuclear Power Plants in China. (author)

EPA Monthly Key Performance Indicator Dashboards 2017

Science.gov (United States)

Each month, the Web Analytics Program posts updated Key Performance Indicator (KPI) dashboards that correspond to three Web performance goals: content consumption, content discovery, and audience engagement.

Performance Monitoring and Evaluation in Botswana’s Public Service: Achievements and Challenges

Directory of Open Access Journals (Sweden)

Dorothy Mpabanga

2016-03-01

Full Text Available The paper aims to explore the implementation of performance monitoring and evaluation tools used in Botswana’s public service. The paper also identifies achievements and challenges of implementing performance monitoring and evaluation system and suggests ways for improvement. This paper uses secondary data sources. The paper reveals lack of performance monitoring and evaluation skills, poor supervision, poor conditions of service and a poor work ethic as some of the factors contributing to ineffective use of performance monitoring and evaluation tools in the service. Leadership commitment and support, benchmarking reforms, training and education, developed administrative and governance structures as well as well-defined public policy and program formulation and implementation processes are some of the success factors to enhanced performance management and evaluation systems in Botswana. The paper argues for adoption of a developmental-led model in order to enhance existing performance monitoring and evaluation system that would improve implementation of government policies and programs. Botswana has been striving to excel in service delivery through performance monitoring and evaluation oriented reforms.

Proposed system for measuring project performance using process-based key performance indicators

NARCIS (Netherlands)

Haponava, T.; Al-Jibouri, Saad H.S.

2012-01-01

Despite some evidence of its usefulness, performance measurement by using Key Performance Indicators (KPIs) in the construction industry also has its critics. Among the shortcomings attributed to existing KPIs is the fact that almost all of them are product oriented. This means that the indicators

Optical Performance Monitoring and Signal Optimization in Optical Networks

DEFF Research Database (Denmark)

Petersen, Martin Nordal

2006-01-01

The thesis studies performance monitoring for the next generation optical networks. The focus is on all-optical networks with bit-rates of 10 Gb/s or above. Next generation all-optical networks offer large challenges as the optical transmitted distance increases and the occurrence of electrical-optical......-electrical regeneration points decreases. This thesis evaluates the impact of signal degrading effects that are becoming of increasing concern in all-optical high-speed networks due to all-optical switching and higher bit-rates. Especially group-velocity-dispersion (GVD) and a number of nonlinear effects will require...... enhanced attention to avoid signal degradations. The requirements for optical performance monitoring features are discussed, and the thesis evaluates the advantages and necessity of increasing the level of performance monitoring parameters in the physical layer. In particular, methods for optical...

Integrating Condition Indicators and Usage Parameters for Improved Spiral Bevel Gear Health Monitoring

Science.gov (United States)

Dempsey, Paula J.; Handschuh, Robert F.; Delgado, Irebert, R.

2013-01-01

The objective of this study was to illustrate the importance of combining Health Usage Monitoring Systems (HUMS) data with usage monitoring system data when detecting rotorcraft transmission health. Three gear sets were tested in the NASA Glenn Spiral Bevel Gear Fatigue Rig. Damage was initiated and progressed on the gear and pinion teeth. Damage progression was measured by debris generation and documented with inspection photos at varying torque values. A contact fatigue analysis was applied to the gear design indicating the effect temperature, load and reliability had on gear life. Results of this study illustrated the benefits of combining HUMS data and actual usage data to indicate progression of damage for spiral bevel gears.

Performance management when innovation and learning become critical performance indicators

NARCIS (Netherlands)

Molleman, E.; Timmerman, H.

2003-01-01

If the organization's leading performance indicators shift towards innovation and the creation of knowledge, this will result in more non-routine work and a higher level of interdependency among workers. We argue that a contingent performance management (PM) system has to focus on Learning and group

Performance test of personal RF monitor for area monitoring at magnetic confinement fusion facility

International Nuclear Information System (INIS)

Tanaka, M.; Uda, T.; Wang, J.; Fujiwara, O.

2012-01-01

For safety management at a magnetic confinement fusion-test facility, protection from not only ionising radiation, but also non-ionising radiation such as the leakage of static magnetic and electromagnetic fields is an important issue. Accordingly, the use of a commercially available personal RF monitor for multipoint area monitoring is proposed. In this study, the performance of both fast- and slow-type personal RF monitors was investigated by using a transverse electromagnetic cell system. The range of target frequencies was between 10 and 300 MHz, corresponding to the ion cyclotron range of frequency in a fusion device. The personal RF monitor was found to have good linearity, frequency dependence and isotropic response. However, the time constant for the electric field sensor of the slow-type monitor was much longer than that for the fast-type monitor. Considering the time-varying field at the facility, it is found that the fast-type monitor is suitable for multipoint monitoring at magnetic confinement fusion test facilities. (authors)

Indicators of alcohol consumption and attributable harm for monitoring and surveillance in European Union countries.

Science.gov (United States)

Rehm, Jürgen; Scafato, Emanuele

2011-03-01

Alcohol is a major risk factor for burden of disease and injury in Europe, and contributes markedly to between region differences in life expectancy. Monitoring and surveillance systems have shown to be a key factor in implementing effective policies. The aim of this paper is to propose a system of indicators for alcohol consumption and attributable harm which can be used as an over-time monitoring tool at the country level as well as for comparisons between countries. A systematic research in electronic data bases was conducted but most of the information was derived from ongoing international efforts to establish alcohol monitoring and surveillance systems. European Union. Countries. Exposure to alcohol, mortality, burden of disease. Adult per capita alcohol consumption, prevalence of abstention, and frequency of drinking more than 60 g pure alcohol in one occasion are proposed as a minimal set of alcohol exposure indicators, which can quickly be implemented in all EU countries. With respect to health harm indicators, the best minimal choice which can be implemented quickly in all countries of the EU would be alcohol-attributable years of life lost due to premature death. In addition, country specific indicators could be added, when alcohol places specific burden on specific diseases. National and European Union-wide monitoring systems for alcohol exposure and attributable harm to inform public health-related policy decisions could be implemented easily. The establishement of such monitoring systems would follow the recent World Assembly resolution for a global strategy to reduce alcohol-related harm. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

Standard guide for in-plant performance evaluation of automatic pedestrian SNM monitors

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This guide is affiliated with Guide C1112 on special nuclear material (SNM) monitors, Guide C1169 on laboratory performance evaluation, and Guide C1189 on calibrating pedestrian SNM monitors. This guide to in-plant performance evaluation is a comparatively rapid way to verify whether a pedestrian SNM monitor performs as expected for detecting SNM or SNM-like test sources. 1.1.1 In-plant performance evaluation should not be confused with the simple daily functional test recommended in Guide C1112. In-plant performance evaluation takes place less often than daily tests, usually at intervals ranging from weekly to once every three months. In-plant evaluations are also more extensive than daily tests and may examine both a monitor's nuisance alarm record and its detection sensitivity for a particular SNM or alternative test source. 1.1.2 In-plant performance evaluation also should not be confused with laboratory performance evaluation. In-plant evaluation is comparatively rapid, takes place in the monitor...

Monitoring SLAC High Performance UNIX Computing Systems

International Nuclear Information System (INIS)

Lettsome, Annette K.

2005-01-01

Knowledge of the effectiveness and efficiency of computers is important when working with high performance systems. The monitoring of such systems is advantageous in order to foresee possible misfortunes or system failures. Ganglia is a software system designed for high performance computing systems to retrieve specific monitoring information. An alternative storage facility for Ganglia's collected data is needed since its default storage system, the round-robin database (RRD), struggles with data integrity. The creation of a script-driven MySQL database solves this dilemma. This paper describes the process took in the creation and implementation of the MySQL database for use by Ganglia. Comparisons between data storage by both databases are made using gnuplot and Ganglia's real-time graphical user interface

Taylorism, Tylerism, and Performance Indicators: Defending the Indefensible?

Science.gov (United States)

Helsby, Gill; Saunders, Murray

1993-01-01

Explores the antecedents to the growing interest in the use of educational performance indicators. Discusses this issue in relation to the work of economist F. W. Taylor and evaluator Ralph Tyler. Describes a five-year project that demonstrates the promise of teacher-developed performance indicators. (CFR)

Moral concerns increase attention and response monitoring during IAT performance: ERP evidence

Science.gov (United States)

Ellemers, Naomi; Derks, Belle; Nieuwenhuis, Sander

2014-01-01

Previous research has revealed that people value morality as a more important person characteristic than competence. In this study, we tested whether people adjust their less explicit behavior more to moral than competence values. Participants performed an Implicit Association Test (IAT) that was either framed as a test of their morality or as a test of their competence. The behavioral results revealed a smaller IAT effect (i.e. a weaker negative implicit bias toward Muslims) in the morality condition than in the competence condition. Moreover, event-related potentials indicated increased social categorization of faces (as indexed by the N1 and P150) and enhanced conflict- and error monitoring (N450 and error-related negativity) in the morality condition compared to the competence condition. These findings indicate that an emphasis on morality can increase attentional and motivational processes that help to improve people’s task performance. PMID:23175679

Analysis of architect’s performance indicators in project delivery process

Science.gov (United States)

Marisa, A.

2018-03-01

Architect as a professional in the construction industry should possess a good performance in project delivery process. As a design professional, architect has an important role to ensure that the process is well-conducted by delivering a high-quality product for the clients. Thus, analyzing architect’s performance indicators is crucial in the project delivery process. This study aims to analyze the relative importance of architect performance indicators in project delivery process among registered architects in North Sumatera, Indonesia. A total of five indicators that measure architect performance in project delivery process were identified and 110 completed questionnaires were obtained and used for data analysis. A relative importance index is used to rank the relative importance of architect performance indicators. Results indicate that focus on the clients is the most important indicator of architect performance in project delivery process. This study demonstrates project communication as one of crucial indicators perceived by the architects for measuring their performance, and fills a knowledge gap on the importance of identifying the most important indicator for measuring architect performance from their own perspectives which previous studies have overlooked to improve performance assessment in project delivery process.

PingER: Internet performance monitoring -- How do collisions make better physics

International Nuclear Information System (INIS)

Matthews, W.

2000-01-01

Internet connectivity is critical infrastructure for modern high energy nuclear and particle physics experiments at laboratories around the world. Achieving the ambitious computing goals is dependent on reliable and fast connections between collaborators in geographically separate regions. The ambitious computing goals of experiments such as BaBar, RHIC and the LHC place internet connectivity in a highly critical position. More over the ability to monitor performance and identify weak points for upgrades has become pivotal to recruiting collaborators not only overseas from the location of the experiment but in locations previously considered remote. The methodology of the Internet End-to-End Performance Monitoring (IEPM) project and long-term trends in regional and trans-oceanic performance measured by the PingER tools has previously been described. The project has grown significantly and now 593 nodes at 424 sites in 72 countries are monitored by 28 monitoring sites in 15 countries. A total of 2,138 end-to-end pairs are monitored, making PingER probably the largest performance monitoring project in the world. Recently particular effort has been made to extend the monitoring of locations in East Europe and the former USSR and to Central and South America and the Middle East, reflecting the increasing reach of high energy nuclear and particle physics research

Constitutive Effects of Performance Indicators

DEFF Research Database (Denmark)

Dahler-Larsen, Peter

2014-01-01

that are demonstrably problematic. Based on a distinction between trivial and advanced measure fixation, an argument is made for constitutive effects that are based on less problematic assumptions. Through this conceptual move, the political dimension of performance indicators is appreciated. The conceptual dimensions...... of constitutive effects are carved out, empirical illustrations of their applicability are offered and implications discussed....

The acute effects of MDMA and ethanol administration on electrophysiological correlates of performance monitoring in healthy volunteers.

Science.gov (United States)

Spronk, D B; Dumont, G J H; Verkes, R J; De Bruijn, E R A

2014-07-01

Knowing how commonly used drugs affect performance monitoring is of great importance, because drug use is often associated with compromised behavioral control. Two of the most commonly used recreational drugs in the western world, 3,4-methylenedioxymethamphetamine (MDMA or "ecstasy") and ethanol (alcohol), are also often used in combination. The error-related negativity (ERN), correct-related negativity (CRN), and N2 are electrophysiological indices of performance monitoring. The present study aimed to investigate how ethanol, MDMA, and their co-administration affect performance monitoring as indexed by the electrophysiological correlates. Behavioral and EEG data were obtained from 14 healthy volunteers during execution of a speeded choice-reaction-time task after administration of ethanol, MDMA, and combined ethanol and MDMA, in a double-blind, placebo-controlled, randomized crossover design. Ethanol significantly reduced ERN amplitudes, while administration of MDMA did not affect the ERN. Co-administration of MDMA and ethanol did not further impair nor ameliorate the effect of ethanol alone. No drug effects on CRN nor N2 were observed. A decreased ERN following ethanol administration is in line with previous work and offers further support for the impairing effects of alcohol intoxication on performance monitoring. This impairment may underlie maladaptive behavior in people who are under influence. Moreover, these data demonstrate for the first time that MDMA does not affect performance monitoring nor does it interact with ethanol in this process. These findings corroborate the notion that MDMA leaves central executive functions relatively unaffected.

Study on Reactor Performance of Online Power Monitoring in PUSPATI TRIGA Reactor (RTP)

International Nuclear Information System (INIS)

Zareen Khan Abdul Jalil Khan; Ridzuan Abdul Mutalib; Mohd Sabri Minhat

2014-01-01

The Reactor TRIGA PUSPATI (RTP) at Malaysia Nuclear Agency is a TRIGA Mark II type reactor and pool type cooled by natural circulation of light water. This paper describe on reactor performance of online power monitoring based on various parameter of reactor such as log power, linear power, period, Fuel and coolant temperature and reactivity parameter with using neutronic and other instrumentation system of reactor. Methodology of online power estimation and monitoring is to evaluate and analysis of reactor power which is important of reactor safety and control. Neutronic instrumentation system will use to estimate power measurement, differential of log and linear power and period during reactor operation .This study also focus on noise fluctuation from fission chamber during reactor operation .This work will present result of online power monitoring from RTP which indicated the safety parameter identification and initiate safety action on crossing the threshold set point trip. Conclude that optimization of online power monitoring will improved the reactor control and safety parameter of reactor during operation. (author)

Development and Monitoring the Key Performance Indicators of the Quality of Care for Patients with Cleft Lips/Palates at Srinagarind Hospital.

Science.gov (United States)

Mongkhonthawornchai, Siriporn; Pradubwong, Suteera; Augsornwan, Darawan; Pathumwiwatana, Pornpen; Sroyhin, Waranya; Pongpagatip, Sumalee; Wongkham, Jamras; Wachirapakorn, Jantira; Lao-unka, Kesorn; Mucnamporn, Tippawan; Chowchuen, Bowornsilp

2015-08-01

Congenital deformities, such as cleft lips and/or cleft palates (CLP), have high incidences in the Northeast of Thailand. These birth defects can affect patient's quality of life. CLP patients need crucial and long-term treatments by a multidisciplinary team starting from prenatal stage to late adulthood. Patients and their families should involve in their own care, and their care objectives should correspond with healthcare providers. Besides the clinical outcome of interdisciplinary team, key performance indicators (KPIs) need to be developed in the hospital service unit in order to improve quality of care and treatment outcomes. 1) to establish KPIs in hospital service units, and 2) to develop the information system to collect, analysis and improve the quality of CLP care. A nurse coordinator was appointed in the Tawanchai Center to coordinate care. The three periods were conducted for the nurse coordinator to work with nine service units in Srinagarind Hospital for consensus on both qualitative and quantitative data to be used as service unit quality measurement. Thirty one KPIs from nine service units were established, collected and analyzed during a four-month period in 2014. The 20 KPIs achieved the unit targets. Two PKIs of the rates of complication with anesthesia during/after surgery in the first 24 hours and the rates of patient/caregiver's satisfaction in acquiring information from the officer were improving. There were 11 KPIs that did not achieve the targets. The coordinator nurse of the Tawanchai Center discussed with the service unit for the cause and how to improve the outcome. The monitoring KPIs will lead to improvement of outcome for better patient quality as well as benchmarking with other hospitals of Cleft Center. The KPIs from hospital service units with the monitoring and analysis of information by the nurse coordinator will enhance and lead to improvement of the quality of the patients and family centered care process.

Integrating policy-based management and SLA performance monitoring

Science.gov (United States)

Liu, Tzong-Jye; Lin, Chin-Yi; Chang, Shu-Hsin; Yen, Meng-Tzu

2001-10-01

Policy-based management system provides the configuration capability for the system administrators to focus on the requirements of customers. The service level agreement performance monitoring mechanism helps system administrators to verify the correctness of policies. However, it is difficult for a device to process the policies directly because the policies are the management concept. This paper proposes a mechanism to decompose a policy into rules that can be efficiently processed by a device. Thus, the device may process the rule and collect the performance statistics information efficiently; and the policy-based management system may collect these performance statistics information and report the service-level agreement performance monitoring information to the system administrator. The proposed policy-based management system achieves both the policy configuration and service-level agreement performance monitoring requirements. A policy consists of a condition part and an action part. The condition part is a Boolean expression of a source host IP group, a destination host IP group, etc. The action part is the parameters of services. We say that an address group is compact if it only consists of a range of IP address that can be denoted by a pair of IP address and corresponding IP mask. If the condition part of a policy only consists of the compact address group, we say that the policy is a rule. Since a device can efficiently process a compact address and a system administrator prefers to define a range of IP address, the policy-based management system has to translate policy into rules and supplements the gaps between policy and rules. The proposed policy-based management system builds the relationships between VPN and policies, policy and rules. Since the system administrator wants to monitor the system performance information of VPNs and policies, the proposed policy-based management system downloads the relationships among VPNs, policies and rules to the

Performance monitoring in the medial frontal cortex and related neural networks: From monitoring self actions to understanding others' actions.

Science.gov (United States)

Ninomiya, Taihei; Noritake, Atsushi; Ullsperger, Markus; Isoda, Masaki

2018-04-27

Action is a key channel for interacting with the outer world. As such, the ability to monitor actions and their consequences - regardless as to whether they are self-generated or other-generated - is of crucial importance for adaptive behavior. The medial frontal cortex (MFC) has long been studied as a critical node for performance monitoring in nonsocial contexts. Accumulating evidence suggests that the MFC is involved in a wide range of functions necessary for one's own performance monitoring, including error detection, and monitoring and resolving response conflicts. Recent studies, however, have also pointed to the importance of the MFC in performance monitoring under social conditions, ranging from monitoring and understanding others' actions to reading others' mental states, such as their beliefs and intentions (i.e., mentalizing). Here we review the functional roles of the MFC and related neural networks in performance monitoring in both nonsocial and social contexts, with an emphasis on the emerging field of a social systems neuroscience approach using macaque monkeys as a model system. Future work should determine the way in which the MFC exerts its monitoring function via interactions with other brain regions, such as the superior temporal sulcus in the mentalizing system and the ventral premotor cortex in the mirror system. Copyright © 2018. Published by Elsevier B.V.

Electronic Performance Monitoring: An Organizational Justice and Concertive Control Perspective.

Science.gov (United States)

Alder, G. Stoney; Tompkins, Phillip K.

1997-01-01

Applies theories of organizational justice/concertive control to account for contradictions inherent in electronic monitoring of workers by organizations. Argues that results are usually positive when workers are involved in the design and implementation of monitoring systems, and monitoring is restricted to performance-related activities with…

Benefits and limitations in the use of performance indicators

International Nuclear Information System (INIS)

Nobile, M.; Ceccantini, M.

1990-01-01

In the paper, some Caorso NPP performance indicators for 1982 through 1986 are shown according to the definition of the Institute of Nuclear Power Operations (INPO). The comparison of the Caorso NPP performance indicators with those of similar American plants stresses an analogous behaviour for all the indicators but two: (Industrial Safety Lost-Time Accident Rate and Diesel Generator Unavailability), for which there is a very significant difference. A subsequent analysis enhances, however, that this difference cannot be attributed to component performance or personnel management politics, but essentially to design choices and/or to peculiar social and economical context; if these factors are taken into consideration, the difference between the performance indicators of the Caorso plant and those of American plants is explained quite satisfactorily. This demonstrates, that even if the usefulness of the performance indicators is confirmed, a careful analysis of all the possible implications is necessary before reaching any final conclusion

Performance analysis of the TNO TLD individual monitoring service

International Nuclear Information System (INIS)

Dijk, J.W.E. van; Julius, H.W.

1990-01-01

The purpose of this study was to analyse the performance and to establish the lowest detectable occupational dose (LDOD) of the TNO TL dosemeter, in use for large scale routine individual monitoring since 1983. The TNO individual monitoring service uses three TLD reader systems and over 45000 TL dosemeters, designed to measure H s (0.07) and H p (10). Each reader system is normalised daily and each individual dosemeter is calibrated every ten readout cycles. The performance of the service is monitored by a double blind experimental set-up. A series of 10 routine dosemeters is issued every fortnight, mailed, exposed by staff not involved in the monitoring service, sent back and evaluated. The conclusion of this study is that the lowest detectable occupational dose is less than 0.04 mSv and that the integrated dose at the level of the annual dose limit is measured within 2%. (author)

Measuring individual work performance: Identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; de Vet, H.C.W.; van der Beek, A.J.

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions.

Development of sustainable performance indicators to assess the benefits of real-time monitoring in mechanised underground mining

OpenAIRE

Govindan, Rajesh; Cao, Wenzhuo; Korre, Anna; Durucan, Sevket; Graham, Peter; Simon, Clara; Barlow, Glenn; Pemberton, Ross

2018-01-01

This paper presents the development and quantification of a catalogue of Sustainable Performance Indicators (SPIs) for the assessment of the benefits real-time mining can offer in small and complex mechanised underground mining operations. The SPIs investigated in detail include: ‒ grade accuracy and error of the resource model, ‒ high/low grade ore classification accuracy and error, ‒ additional high grade ore identified per unit volume, ‒ profit expected per unit volume, ‒ or...

Measuring individual work performance: identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; Vet, H.C de; Beek, A.J. van der

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. OBJECTIVE: This

Monitoring and evaluation of sport-based HIV/AIDS awareness programmes: Strengthening outcome indicators.

Science.gov (United States)

Maleka, Elma Nelisiwe

2017-12-01

There are number of Non-Governmental Organisations (NGOs) in South Africa that use sport as a tool to respond to Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/AIDS), however, little is reported about the outcomes and impact of these programmes. The aim of this study is to contribute to a generic monitoring and evaluation framework by improving the options for the use of outcome indicators of sport-based HIV/AIDS awareness programmes of selected NGOs in South Africa. A qualitative method study was carried out with seven employees of five selected NGOs that integrate sport to deliver HIV/AIDS programmes in South Africa. The study further involved six specialists/experts involved in the field of HIV/AIDS and an official from Sport Recreation South Africa (SRSA). Multiple data collection instruments including desktop review, narrative systematic review, document analysis, one-on-one interviews and focus group interview were used to collect information on outcomes and indicators for sport-based HIV/AIDS awareness programmes. The information was classified according to the determinants of HIV/AIDS. The overall findings revealed that the sport-based HIV/AIDS awareness programmes of five selected NGOs examined in this study focus on similar HIV prevention messages within the key priorities highlighted in the current National Strategic Plan for HIV/AIDS, STIs and TB of South Africa. However, monitoring and evaluating outcomes of sport-based HIV/AIDS programmes of the selected NGOs remains a challenge. A need exists for the improvement of the outcome statements and indicators for their sport-based HIV/AIDS awareness programmes. This study proposed a total of 51 generic outcome indicators focusing on measuring change in the knowledge of HIV/AIDS and change in attitude and intention towards HIV risk behaviours. In addition, this study further proposed a total of eight generic outcome indicators to measure predictors of HIV risk behaviour. The selected

Electoronic Performance Monitoring in Call Centers: An Ethical Decision Model

OpenAIRE

Perkins, David

2013-01-01

Ever since it emerged on a widespread basis in the 1990s, electronic performance monitoring of employees has received significant scrutiny in the literature. Call centers have been the focus of many of these studies. This particular study addresses the issue of electronic performance monitoring in call centers from an ethical perspective. The following ethical dilemma is offered: "Is it ethical for a call center manager to evaluate the performance of a call center employee using electronic pe...

200-BP-1 Prototype Hanford Barrier -- 15 Years of Performance Monitoring

Energy Technology Data Exchange (ETDEWEB)

Ward, Anderson L.; Draper, Kathryn E.; Link, Steven O.; Clayton, Ray E.

2011-09-30

Monitoring is an essential component of engineered barrier system design and operation. A composite capacitive cover, including a capillary break and an evapotranspiration (ET) barrier at the Hanford Site, is generating data that can be used to help resolve these issues. The prototype Hanford barrier was constructed over the 216-B-57 Crib in 1994 to evaluate surface-barrier constructability, construction costs, and physical and hydrologic performance at the field scale. The barrier has been routinely monitored between November 1994 and September 1998 as part of a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) treatability test of barrier performance for the 200 BP 1 Operable Unit. Since FY 1998, monitoring has focused on a more limited set of key water balance, stability, and biotic parameters. In FY 2009, data collection was focused on: (1) water-balance monitoring, consisting of precipitation, runoff, soil moisture storage, and drainage measurements with evapotranspiration calculated by difference; (2) stability monitoring, consisting of asphalt-layer-settlement, basalt-side-slope-stability, and surface-elevation measurements; (3) vegetation dynamics; and (4) animal use. September 2009 marked 15 years since the start of monitoring and the collection of performance data. This report describes the results of monitoring activities during the period October 1, 2008, through September 30, 2009, and summarizes the 15 years of performance data collected from September 1994 through September 2009.

Performance Assessment Monitoring Plan for the Hanford Site Low-Level Burial Grounds

International Nuclear Information System (INIS)

2006-01-01

regular review and comparison. The annual reports discussed here are the primary sources for these reviews. The pathways of interest are air and groundwater for both operational and post-closure conditions at the LLBG, with groundwater considered to be the most significant long-term exposure pathway. Constituents that contributed at least 0.1% of the total relative hazard were selected as target analytes for monitoring. These are technetium-99, uranium, and iodine-129. Because of its environmental unavailability, carbon 14 was removed from the list of constituents. Given the potential uncertainties in inventories at the 200 Area LLBG and the usefulness of tritium as a contaminant indicator, tritium will be monitored as a constituent of concern at all burial grounds. Preexisting contamination plumes in groundwater beneath low-level waste management areas are attributed to other past-practice liquid waste disposal sites. Groundwater and air will be sampled and analyzed for radiogenic components. Subsidence monitoring will also be performed on a regular basis. The existing near-facility and surveillance air monitoring programs are sufficient to satisfy the performance assessment monitoring. Groundwater monitoring will utilize the existing network of wells at the LLBG, and co-sampling with RCRA groundwater monitoring, to be sampled semiannually. Installation of additional wells is currently underway to replace wells that have gone dry

High-Performance Monitoring Architecture for Large-Scale Distributed Systems Using Event Filtering

Science.gov (United States)

Maly, K.

1998-01-01

Monitoring is an essential process to observe and improve the reliability and the performance of large-scale distributed (LSD) systems. In an LSD environment, a large number of events is generated by the system components during its execution or interaction with external objects (e.g. users or processes). Monitoring such events is necessary for observing the run-time behavior of LSD systems and providing status information required for debugging, tuning and managing such applications. However, correlated events are generated concurrently and could be distributed in various locations in the applications environment which complicates the management decisions process and thereby makes monitoring LSD systems an intricate task. We propose a scalable high-performance monitoring architecture for LSD systems to detect and classify interesting local and global events and disseminate the monitoring information to the corresponding end- points management applications such as debugging and reactive control tools to improve the application performance and reliability. A large volume of events may be generated due to the extensive demands of the monitoring applications and the high interaction of LSD systems. The monitoring architecture employs a high-performance event filtering mechanism to efficiently process the large volume of event traffic generated by LSD systems and minimize the intrusiveness of the monitoring process by reducing the event traffic flow in the system and distributing the monitoring computation. Our architecture also supports dynamic and flexible reconfiguration of the monitoring mechanism via its Instrumentation and subscription components. As a case study, we show how our monitoring architecture can be utilized to improve the reliability and the performance of the Interactive Remote Instruction (IRI) system which is a large-scale distributed system for collaborative distance learning. The filtering mechanism represents an Intrinsic component integrated

The effects of monitoring environment on problem-solving performance.

Science.gov (United States)

Laird, Brian K; Bailey, Charles D; Hester, Kim

2018-01-01

While effective and efficient solving of everyday problems is important in business domains, little is known about the effects of workplace monitoring on problem-solving performance. In a laboratory experiment, we explored the monitoring environment's effects on an individual's propensity to (1) establish pattern solutions to problems, (2) recognize when pattern solutions are no longer efficient, and (3) solve complex problems. Under three work monitoring regimes-no monitoring, human monitoring, and electronic monitoring-114 participants solved puzzles for monetary rewards. Based on research related to worker autonomy and theory of social facilitation, we hypothesized that monitored (versus non-monitored) participants would (1) have more difficulty finding a pattern solution, (2) more often fail to recognize when the pattern solution is no longer efficient, and (3) solve fewer complex problems. Our results support the first two hypotheses, but in complex problem solving, an interaction was found between self-assessed ability and the monitoring environment.

A road safety performance indicator for vehicle fleet compatibility.

Science.gov (United States)

Christoph, Michiel; Vis, Martijn Alexander; Rackliff, Lucy; Stipdonk, Henk

2013-11-01

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the 'relative severity' of individual collisions between different vehicle types, and the share of those vehicle types within a country's fleet. The relative severity is a measure for the personal damage that can be expected from a collision between two vehicles of any type, relative to that of a collision between passenger cars. It is shown how this number can be calculated using vehicle mass only. A sensitivity analysis is performed to study the dependence of the indicator on parameter values and basic assumptions made. The indicator is easy to apply and satisfies the requirements for appropriate safety performance indicators. It was developed in such a way that it specifically scores the intrinsic safety of a fleet due to its composition, without being influenced by other factors, like helmet wearing. For the sake of simplicity, and since the required data is available throughout Europe, the indicator was applied to the relative share of three of the main vehicle types: passenger cars, heavy goods vehicles and motorcycles. Using the vehicle fleet data from 13EU Member States and Norway, the indicator was used to rank the countries' safety performance. The UK was found to perform best in terms of its fleet composition (value is 1.07), while Greece has the worst performance with the highest indicator value (1.41). Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparative Performance of Ground vs. Aerially Assessed RGB and Multispectral Indices for Early-Growth Evaluation of Maize Performance under Phosphorus Fertilization

Directory of Open Access Journals (Sweden)

Adrian Gracia-Romero

2017-11-01

Full Text Available Low soil fertility is one of the factors most limiting agricultural production, with phosphorus deficiency being among the main factors, particularly in developing countries. To deal with such environmental constraints, remote sensing measurements can be used to rapidly assess crop performance and to phenotype a large number of plots in a rapid and cost-effective way. We evaluated the performance of a set of remote sensing indices derived from Red-Green-Blue (RGB images and multispectral (visible and infrared data as phenotypic traits and crop monitoring tools for early assessment of maize performance under phosphorus fertilization. Thus, a set of 26 maize hybrids grown under field conditions in Zimbabwe was assayed under contrasting phosphorus fertilization conditions. Remote sensing measurements were conducted in seedlings at two different levels: at the ground and from an aerial platform. Within a particular phosphorus level, some of the RGB indices strongly correlated with grain yield. In general, RGB indices assessed at both ground and aerial levels correlated in a comparable way with grain yield except for indices a* and u*, which correlated better when assessed at the aerial level than at ground level and Greener Area (GGA which had the opposite correlation. The Normalized Difference Vegetation Index (NDVI evaluated at ground level with an active sensor also correlated better with grain yield than the NDVI derived from the multispectral camera mounted in the aerial platform. Other multispectral indices like the Soil Adjusted Vegetation Index (SAVI performed very similarly to NDVI assessed at the aerial level but overall, they correlated in a weaker manner with grain yield than the best RGB indices. This study clearly illustrates the advantage of RGB-derived indices over the more costly and time-consuming multispectral indices. Moreover, the indices best correlated with GY were in general those best correlated with leaf phosphorous content

Performance assessment of the proposed Monitored Retrievable Storage Facility

International Nuclear Information System (INIS)

Chockie, A.D.; Hostick, C.J.; Winter, C.

1986-02-01

Pacific Northwest laboratory (PNL) has completed a performance evaluation of the proposed monitored retrievable storage (MRS) facility. This study was undertaken as part of the Department of Energy MRS Program at PNL. The objective of the performance evaluation was to determine whether the conceptual MRS facility would be able to process spent fuel at the specified design rate of 3600 metric tons of uranium (MTU) per year. The performance of the proposed facility was assessed using the computer model COMPACT (Computer Optimization of Processing and Cask Transport) to simulate facility operations. The COMPACT model consisted of three application models each of which addressed a different aspect of the facility's operation: MRS/waste transportation interface; cask handling capability; and disassembly/consolidation (hot cell) operations. Our conclusions, based on the assessment of design criteria for the proposed facility, are as follows: Facilities and equipment throughout the facility have capability beyond the 3600 MTU/y design requirement. This added capability provides a reserve to compensate for unexpected perturbations in shipping or handling of the spent fuel. Calculations indicate that the facility's maximum maintainable processing capability is approximately 4800 MTU/y

Continued Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

Science.gov (United States)

Delgado, Irebert R.; Dempsey, Paula J.; Antolick, Lance J.; Wade, Daniel R.

2013-01-01

This paper details analyses of condition indicator performance for the helicopter nose gearbox within the U.S. Army's Condition-Based Maintenance Program. Ten nose gearbox data sets underwent two specific analyses. A mean condition indicator level analysis was performed where condition indicator performance was based on a 'batting average' measured before and after part replacement. Two specific condition indicators, Diagnostic Algorithm 1 and Sideband Index, were found to perform well for the data sets studied. A condition indicator versus gear wear analysis was also performed, where gear wear photographs and descriptions from Army tear-down analyses were categorized based on ANSI/AGMA 1010-E95 standards. Seven nose gearbox data sets were analyzed and correlated with condition indicators Diagnostic Algorithm 1 and Sideband Index. Both were found to be most responsive to gear wear cases of micropitting and spalling. Input pinion nose gear box condition indicators were found to be more responsive to part replacement during overhaul than their corresponding output gear nose gear box condition indicators.

Performance monitoring of GRID superscalar with OCM-G/G-PM: Integration issues

NARCIS (Netherlands)

Badia, R.M.; Sirvent, R.; Bubak, M.; Funika, W.; Machner, P.; Gorlatch, S.; Bubak, M.; Priol, T.

2008-01-01

In this paper the use of a Grid-enabled system for performance monitoring of GRID superscalar-compliant applications is addressed. Performance monitoring is built on top of the OCM-G monitoring system developed in the EU IST CrossGrid project. A graphical user tool G-PM is used to interpret

Linking Indices for Biodiversity Monitoring to Extinction Risk Theory

Science.gov (United States)

Mccarthy, Michael A; Moore, Alana L; Krauss, Jochen; Morgan, John W; Clements, Christopher F

2014-01-01

Biodiversity indices often combine data from different species when used in monitoring programs. Heuristic properties can suggest preferred indices, but we lack objective ways to discriminate between indices with similar heuristics. Biodiversity indices can be evaluated by determining how well they reflect management objectives that a monitoring program aims to support. For example, the Convention on Biological Diversity requires reporting about extinction rates, so simple indices that reflect extinction risk would be valuable. We developed 3 biodiversity indices that are based on simple models of population viability that relate extinction risk to abundance. We based the first index on the geometric mean abundance of species and the second on a more general power mean. In a third index, we integrated the geometric mean abundance and trend. These indices require the same data as previous indices, but they also relate directly to extinction risk. Field data for butterflies and woodland plants and experimental studies of protozoan communities show that the indices correlate with local extinction rates. Applying the index based on the geometric mean to global data on changes in avian abundance suggested that the average extinction probability of birds has increased approximately 1% from 1970 to 2009. Conectando Índices para el Monitoreo de la Biodiversidad con la Teoría de Riesgo de Extinción Resumen Los índices de biodiversidad combinan frecuentemente los datos de diferentes especies cuando se usan en los programas de monitoreo. Las propiedades heurísticas pueden sugerir índices preferidos, pero carecemos de medios objetivos para discriminar a los índices con propiedades heurísticas similares. Los índices de biodiversidad pueden evaluarse al determinar qué tan bien reflejan los objetivos de manejo que un programa de monitoreo busca apoyar. Por ejemplo, la Convención sobre la Diversidad Biológica requiere reportar las tasas de extinción, así que los �

In-flight spectral performance monitoring of the Airborne Prism Experiment.

Science.gov (United States)

D'Odorico, Petra; Alberti, Edoardo; Schaepman, Michael E

2010-06-01

Spectral performance of an airborne dispersive pushbroom imaging spectrometer cannot be assumed to be stable over a whole flight season given the environmental stresses present during flight. Spectral performance monitoring during flight is commonly accomplished by looking at selected absorption features present in the Sun, atmosphere, or ground, and their stability. The assessment of instrument performance in two different environments, e.g., laboratory and airborne, using precisely the same calibration reference, has not been possible so far. The Airborne Prism Experiment (APEX), an airborne dispersive pushbroom imaging spectrometer, uses an onboard in-flight characterization (IFC) facility, which makes it possible to monitor the sensor's performance in terms of spectral, radiometric, and geometric stability in flight and in the laboratory. We discuss in detail a new method for the monitoring of spectral instrument performance. The method relies on the monitoring of spectral shifts by comparing instrument-induced movements of absorption features on ground and in flight. Absorption lines originate from spectral filters, which intercept the full field of view (FOV) illuminated using an internal light source. A feature-fitting algorithm is used for the shift estimation based on Pearson's correlation coefficient. Environmental parameter monitoring, coregistered on board with the image and calibration data, revealed that differential pressure and temperature in the baffle compartment are the main driving parameters explaining the trend in spectral performance deviations in the time and the space (across-track) domains, respectively. The results presented in this paper show that the system in its current setup needs further improvements to reach a stable performance. Findings provided useful guidelines for the instrument revision currently under way. The main aim of the revision is the stabilization of the instrument for a range of temperature and pressure conditions

10 CFR 600.341 - Monitoring and reporting program and financial performance.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Monitoring and reporting program and financial performance. 600.341 Section 600.341 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL... Organizations Post-Award Requirements § 600.341 Monitoring and reporting program and financial performance. (a...

Performance Analysis of Retrofitted Tribo-Corrosion Test Rig for Monitoring In Situ Oil Conditions

Directory of Open Access Journals (Sweden)

Arpith Siddaiah

2017-09-01

Full Text Available Oils and lubricants, once extracted after use from a mechanical system, can hardly be reused, and should be refurbished or replaced in most applications. New methods of in situ oil and lubricant efficiency monitoring systems have been introduced for a wide variety of mechanical systems, such as automobiles, aerospace aircrafts, ships, offshore wind turbines, and deep sea oil drilling rigs. These methods utilize electronic sensors to monitor the “byproduct effects” in a mechanical system that are not indicative of the actual remaining lifecycle and reliability of the oils. A reliable oil monitoring system should be able to monitor the wear rate and the corrosion rate of the tribo-pairs due to the inclusion of contaminants. The current study addresses this technological gap, and presents a novel design of a tribo-corrosion test rig for oils used in a dynamic system. A pin-on-disk tribometer test rig retrofitted with a three electrode-potentiostat corrosion monitoring system was used to analyze the corrosion and wear rate of a steel tribo-pair in industrial grade transmission oil. The effectiveness of the retrofitted test rig was analyzed by introducing various concentrations of contaminants in an oil medium that usually leads to a corrosive working environment. The results indicate that the retrofitted test rig can effectively monitor the in situ tribological performance of the oil in a controlled dynamic corrosive environment. It is a useful method to understand the wear–corrosion synergies for further experimental work, and to develop accurate predictive lifecycle assessment and prognostic models. The application of this system is expected to have economic benefits and help reduce the ecological oil waste footprint.

Performance Analysis of Retrofitted Tribo-Corrosion Test Rig for Monitoring In Situ Oil Conditions.

Science.gov (United States)

Siddaiah, Arpith; Khan, Zulfiqar Ahmad; Ramachandran, Rahul; Menezes, Pradeep L

2017-09-28

Oils and lubricants, once extracted after use from a mechanical system, can hardly be reused, and should be refurbished or replaced in most applications. New methods of in situ oil and lubricant efficiency monitoring systems have been introduced for a wide variety of mechanical systems, such as automobiles, aerospace aircrafts, ships, offshore wind turbines, and deep sea oil drilling rigs. These methods utilize electronic sensors to monitor the "byproduct effects" in a mechanical system that are not indicative of the actual remaining lifecycle and reliability of the oils. A reliable oil monitoring system should be able to monitor the wear rate and the corrosion rate of the tribo-pairs due to the inclusion of contaminants. The current study addresses this technological gap, and presents a novel design of a tribo-corrosion test rig for oils used in a dynamic system. A pin-on-disk tribometer test rig retrofitted with a three electrode-potentiostat corrosion monitoring system was used to analyze the corrosion and wear rate of a steel tribo-pair in industrial grade transmission oil. The effectiveness of the retrofitted test rig was analyzed by introducing various concentrations of contaminants in an oil medium that usually leads to a corrosive working environment. The results indicate that the retrofitted test rig can effectively monitor the in situ tribological performance of the oil in a controlled dynamic corrosive environment. It is a useful method to understand the wear-corrosion synergies for further experimental work, and to develop accurate predictive lifecycle assessment and prognostic models. The application of this system is expected to have economic benefits and help reduce the ecological oil waste footprint.

Evaluation of two dairy herd reproductive performance indicators that are adjusted for voluntary waiting period

Directory of Open Access Journals (Sweden)

Löf Emma

2012-01-01

Full Text Available Abstract Background Overall reproductive performance of dairy herds is monitored by various indicators. Most of them do not consider all eligible animals and do not consider different management strategies at farm level. This problem can be alleviated by measuring the proportion of pregnant cows by specific intervals after their calving date or after a fixed time period, such as the voluntary waiting period. The aim of this study was to evaluate two reproductive performance indicators that consider the voluntary waiting period at the herd. The two indicators were: percentage of pregnant cows in the herd after the voluntary waiting period plus 30 days (PV30 and percentage of inseminated cows in the herd after the voluntary waiting period plus 30 days (IV30. We wanted to assess how PV30 and IV30 perform in a simulation of herds with different reproductive management and physiology and to compare them to indicators of reproductive performance that do not consider the herd voluntary waiting period. Methods To evaluate the reproductive indicators we used the SimHerd-program, a stochastic simulation model, and 18 scenarios were simulated. The scenarios were designed by altering the reproductive management efficiency and the status of reproductive physiology of the herd. Logistic regression models, together with receiver operating characteristics (ROC, were used to examine how well the reproductive performance indicators could discriminate between herds of different levels of reproductive management efficiency or reproductive physiology. Results The logistic regression models with the ROC analysis showed that IV30 was the indicator that best discriminated between different levels of management efficiency followed by PV30, calving interval, 200-days not-in calf-rate (NotIC200, in calf rate at100-days (IC100 and a fertility index. For reproductive physiology the ROC analysis showed that the fertility index was the indicator that best discriminated

New indicators for global crop monitoring in CropWatch -case study in North China Plain

International Nuclear Information System (INIS)

Bingfang, Wu; Miao, Zhang; Hongwei, Zeng; Guoshui, Liu; Sheng, Chang; Gommes, René

2014-01-01

CropWatch is a monitoring system developed and operated by the Institute of Remote Sensing and Digital Earth (Chinese Academy of Sciences) to provide global-scale crop information. Now in its 15th year of operation, CropWatch was modified several times to be a timely, comprehensive and independent global agricultural monitoring system using advanced remote sensing technology. Currently CropWatch is being upgraded with new indicators based on new sensors, especially those on board of China Environmental Satellite (HJ-1 CCD), the Medium Resolution Spectral Imager (MERSI) on Chinese meteorological satellite (FY-3A) and cloud classification products of FY-2. With new satellite data, CropWatch will generate new indicators such as fallow land ratio (FLR), crop condition for irrigated (CCI) and non-irrigated (CCNI) areas separately, photosynthetically active radiation (PAR), radiation use efficiency for the photosynthetically active radiation (RUE PAR ) and cropping index (CI) with crop rotation information (CRI). In this paper, the methods for monitoring the new indicators are applied to the North China Plain which is one of the major grain producing areas in China. This paper shows the preliminary results of the new indicators and methods; they still need to be thoroughly validated before being incorporated into the operational CropWatch system. In the future, the new and improved indicators will help us to better understand the global situation of food security

Pengembangan Sistem Manajemen dan Analisis Key Performance Indicator “Smart Kpi” Berbasis Web

Directory of Open Access Journals (Sweden)

Meiliana Meiliana

2014-12-01

Full Text Available The goals of organization or company are achieved by the given objectives of all the employees. In order to measure the achievement of the employees, the organization or company can use Key Performance Indicator (KPI. However, most of the application of KPI is done manually, for example in inputting scores, result submission, score checking, and report creation. Seeing this condition, an application called “Smart KPI” is developed to provide an effective and efficient KPI System, to provide the valid KPI data to assist the monitoring of employees performance, and to create the organizational structure by relating the supervisor with the subordinate. This application is developed using Scrum research method that consists of backlog and sprint. The backlog consists of literature studies, comparing previous research or product, distributing questionnaires, and interviewing IT experts. Sprint consists of sprint and release planning and actual sprint work. The result is a PHP based web application for KPI processing for an organization or company that depends on the structure of users and indicators that have been set in the back-end and apply the settings and process the KPI in the front-end. The conclusion that obtained is this application will help the KPI processing which match the user requirement and has a good user interface and performance.

Safety performance indicators for the road network.

NARCIS (Netherlands)

Weijermars, W. Gitelman, V. Papadimitriou, E. Lima De & Azevedo, C.

2010-01-01

Within the 6th FP European project SafetyNet, a team has worked on the development of Safety Performance Indicators (SPIs) on seven road safety related areas. These SPIs reflect the operational conditions of the road traffic system that influence the system's safety performance. SPIs were developed

Internal quality control indicators of cervical cytopathology exams performed in laboratories monitored by the External Quality Control Laboratory.

Science.gov (United States)

Ázara, Cinara Zago Silveira; Manrique, Edna Joana Cláudio; Tavares, Suelene Brito do Nascimento; de Souza, Nadja Lindany Alves; Amaral, Rita Goreti

2014-09-01

To evaluate the impact of continued education provided by an external quality control laboratory on the indicators of internal quality control of cytopathology exams. The internal quality assurance indicators for cytopathology exams from 12 laboratories monitored by the External Quality Control Laboratory were evaluated. Overall, 185,194 exams were included, 98,133 of which referred to the period preceding implementation of a continued education program, while 87,061 referred to the period following this intervention. Data were obtained from the Cervical Cancer Database of the Brazilian National Health Service. Following implementation of the continued education program, the positivity index (PI) remained within recommended limits in four laboratories. In another four laboratories, the PI progressed from below the limits to within the recommended standards. In one laboratory, the PI remained low, in two laboratories, it remained very low, and in one, it increased from very low to low. The percentage of exams compatible with a high-grade squamous intraepithelial lesion (HSIL) remained within the recommended limits in five laboratories, while in three laboratories it progressed from below the recommended levels to >0.4% of the total number of satisfactory exams, and in four laboratories it remained below the standard limit. Both the percentage of atypical squamous cells of undetermined significance (ASC-US) in relation to abnormal exams, and the ratio between ASC-US and intraepithelial lesions remained within recommended levels in all the laboratories investigated. An improvement was found in the indicators represented by the positivity index and the percentage of exams compatible with a high-grade squamous intraepithelial lesion, showing that the role played by the external quality control laboratory in providing continued education contributed towards improving laboratory staff skills in detecting cervical cancer precursor lesions.

Report on the performance monitoring system for the interim waste containment at the Niagara Falls Storage Site, Lewiston, New York

International Nuclear Information System (INIS)

1985-10-01

The Niagara Falls Storage Site (NFSS) is an interim storage site for low-level radioactive waste, established by the US Department of Energy (DOE) at Lewiston, New York. The waste containment structure for encapsulating low-level radioactive waste at the NFSS has been designed to minimize infiltration of rainfall, prevent pollution of groundwater, preclude formation of leachate, and prevent radon emanation. Accurately determining the performance of the main engineered elements of the containment structure will be important in establishing confidence in the ability of the structure to retain the wastes. For this purpose, a waste containment performance monitoring system has been developed to verify that these elements are functioning as intended. The key objective of the performance monitoring system is the early detection of trends that could be indicative of weaknesses developing in the containment structure so that corrective action can be taken before the integrity of the structure is compromised. Consequently, subsurface as well as surface monitoring techniques will be used. After evaluating several types of subsurface instrumentation, it was determined that vibrating wire pressure transducers, in combination with surface monitoring techniques, would satisfactorily monitor the parameters of concern, such as water accumulation inside the containment facility, waste settlement, and shrinkage of the clay cover. Surface monitoring will consist of topographic surveys based on predetermined gridlines, walkover surveys, and aerial photography to detect vegetative stress or other changes not evident at ground level. This report details the objectives of the performance monitoring system, identifies the elements of the containment design whose performance will be monitored, describes the monitoring system recommended, and outlines the costs associated with the monitoring system. 5 refs., 4 figs., 3 tabs

SCALEA-G: A Unified Monitoring and Performance Analysis System for the Grid

Directory of Open Access Journals (Sweden)

Hong-Linh Truong

2004-01-01

Full Text Available This paper describes SCALEA-G, a unified monitoring and performance analysis system for the Grid. SCALEA-G is implemented as a set of grid services based on the Open Grid Services Architecture (OGSA. SCALEA-G provides an infrastructure for conducting online monitoring and performance analysis of a variety of Grid services including computational and network resources, and Grid applications. Both push and pull models are supported, providing flexible and scalable monitoring and performance analysis. Source code and dynamic instrumentation are implemented to perform profiling and monitoring of Grid applications. A novel instrumentation request language for dynamic instrumentation and a standardized intermediate representation for binary code have been developed to facilitate the interaction between client and instrumentation services.

Performance Monitoring in Children Following Traumatic Brain Injury Compared to Typically Developing Children

Directory of Open Access Journals (Sweden)

Amy A. Wilkinson PhD

2017-10-01

Full Text Available Children with traumatic brain injury are reported to have deficits in performance monitoring, but the mechanisms underlying these deficits are not well understood. Four performance monitoring hypotheses were explored by comparing how 28 children with traumatic brain injury and 28 typically developing controls (matched by age and sex performed on the stop-signal task. Control children slowed significantly more following incorrect than correct stop-signal trials, fitting the error monitoring hypothesis. In contrast, the traumatic brain injury group showed no performance monitoring difference with trial types, but significant group differences did not emerge, suggesting that children with traumatic brain injury may not perform the same way as controls.

Human Resources Key Performance Indicators

Directory of Open Access Journals (Sweden)

Gabčanová Iveta

2012-03-01

Full Text Available The article brings out a proposed strategy map and respective key performance indicators (KPIs in human resources (HR. The article provides an overview of how HR activities are supported in order to reach the partial goals of HR as defined in the strategic map. Overall the aim of the paper is to show the possibilities of using the modern Balanced Scorecard method in human capital.

Numerical Implementation of Indicators and Statistical Control Tools in Monitoring and Evaluating CACEI-ISO Indicators of Study Program in Industrial Process by Systematization

Science.gov (United States)

Ayala, Gabriela Cota; Real, Francia Angélica Karlos; Ivan, Ramirez Alvarado Edqar

2016-01-01

The research was conducted to determine if the study program of the career of industrial processes Technological University of Chihuahua, 1 year after that it was certified by CACEI, continues achieving the established indicators and ISO 9001: 2008, implementing quality tools, monitoring of essential indicators are determined, flow charts are…

Analysis of ESG indicators for measuring enterprise performance

Directory of Open Access Journals (Sweden)

Zuzana Chvátalová

2013-01-01

Full Text Available In this article authors focus on the analysis of the whole set of environmental, social and corporate governance (ESG indicators for the elimination of double or triple effects within the next construction of methods for measuring corporate performance. They build on their previously published results (in Acta univ. agric. et silvic. Mendel. Brun., 2012. The partial actual selected results of a recently undertaken currently project entitled ‘Construction of Methods for Multifactorial Assessment of Company Complex Performance in Selected Sectors’ were used. This project was solved the research teams of the Faculty of Business and Management of Brno University Technology and Faculty of Business and Economics of Mendel University in Brno since 2011. Further theoretical resources in the environmental, social and corporate governance area, known indicator databases (namely Global Reporting Initiative, comparative analysis, resp. syntheses for identifying possible of common indicator properties were identified to classify indicator subsets to preclude double or even triple effect based on mathematical set theory (Venn diagrams. The indicator analysis in constructed multi-factorial methods contributes to precise decision making in management to improve corporate performance.

Quality Assurance in Individual Monitoring: 10 Years of Performance Monitoring of the TLD Based TNO Individual Monitoring Service (invited paper)

Energy Technology Data Exchange (ETDEWEB)

Dijk, J.W.E. van

1998-07-01

The QA subscription forms the nucleus of the Quality Assurance (QA) programme of the TLD-based Individual Monitoring Service of TNO-CSD. This QA subscription is the subscription of a dummy customer to the service. As this customer is treated exactly like a normal customer, all aspects of the service are monitored by the QA subscription. An overview is given of 10 years of monitoring the performance of the service. Various improvements over the past decade have resulted in a standard deviation in a low dose measurement of 0.01 mSv and a relative standard deviation at higher doses of 5%. These figures represent the performance under routine circumstances and thus include variations due to variations in the natural background from place to place and, for example, due to transport. (author)

Quality Assurance in Individual Monitoring: 10 Years of Performance Monitoring of the TLD Based TNO Individual Monitoring Service (invited paper)

International Nuclear Information System (INIS)

Dijk, J.W.E. van

1998-01-01

The QA subscription forms the nucleus of the Quality Assurance (QA) programme of the TLD-based Individual Monitoring Service of TNO-CSD. This QA subscription is the subscription of a dummy customer to the service. As this customer is treated exactly like a normal customer, all aspects of the service are monitored by the QA subscription. An overview is given of 10 years of monitoring the performance of the service. Various improvements over the past decade have resulted in a standard deviation in a low dose measurement of 0.01 mSv and a relative standard deviation at higher doses of 5%. These figures represent the performance under routine circumstances and thus include variations due to variations in the natural background from place to place and, for example, due to transport. (author)

ROLE AND IMPORTANCE OF KEY PERFORMANCE INDICATORS MEASUREMENT

Directory of Open Access Journals (Sweden)

Rade Stanković

2011-03-01

Full Text Available Key performance indicators are financial and non financial indicators that organizations use inorder to estimate and fortify how successful they are, aiming previously established long lastinggoals. Appropriate selection of indicators that will be used for measuring is of a greatest importance.Process organization of business is necessary to be constitute in order to realize such effective andefficient system or performance measuring via KPI. Process organization also implies customerorientation and necessary flexibility in nowadays condition of global competition.Explanation of process organization, the way of KPI selection, and practical example of KPImeasuring in Toyota dealerships are presented in this paper.

Numerical indicators of nuclear power plant safety performance

International Nuclear Information System (INIS)

1991-04-01

The workshop was attended by representatives from twenty-two Member States operating nuclear power plants (NPP). The current status of the development and use of numerical indicators of NPP safety performance was presented. A consensus on the benefits of use of numerical indicators was reached. The Technical Committee Meeting reviewed the progress in the development and use of performance indicators and identified them as the most appropriate ones for international use. The purpose of this document is to summarize the discussions held and conclusions reached in both meetings. Lists of participants and all the papers of both meetings are presented

Development of an air-operated actuator performance monitoring system for regulatory usage

International Nuclear Information System (INIS)

Sung, K. Y.; Kwon, S. J.

2004-01-01

The performance monitoring system of air-operated actuators for regulatory usage has been being developed. Essential elements and operating parameters affecting the actuator performance have been investigated to provide basic information for system development. The monitoring system including an air-operated actuator testing facility and analysis softwares for monitoring and evaluation are also introduced in this paper. As a result of simulated tests, it was known that the system could be a useful tool for the effective monitoring of actuator performance change and fault conditions. This system would be applied to regulatory inspection for utility's data validation and to the training of regulatory staff in future after some modification and expansion

An Integrated Model Based on a Hierarchical Indices System for Monitoring and Evaluating Urban Sustainability

Directory of Open Access Journals (Sweden)

Xulin Guo

2013-02-01

Full Text Available Over 50% of world’s population presently resides in cities, and this number is expected to rise to ~70% by 2050. Increasing urbanization problems including population growth, urban sprawl, land use change, unemployment, and environmental degradation, have markedly impacted urban residents’ Quality of Life (QOL. Therefore, urban sustainability and its measurement have gained increasing attention from administrators, urban planners, and scientific communities throughout the world with respect to improving urban development and human well-being. The widely accepted definition of urban sustainability emphasizes the balancing development of three primary domains (urban economy, society, and environment. This article attempts to improve the aforementioned definition of urban sustainability by incorporating a human well-being dimension. Major problems identified in existing urban sustainability indicator (USI models include a weak integration of potential indicators, poor measurement and quantification, and insufficient spatial-temporal analysis. To tackle these challenges an integrated USI model based on a hierarchical indices system was established for monitoring and evaluating urban sustainability. This model can be performed by quantifying indicators using both traditional statistical approaches and advanced geomatic techniques based on satellite imagery and census data, which aims to provide a theoretical basis for a comprehensive assessment of urban sustainability from a spatial-temporal perspective.

A FRAMEWORK FOR PERFORMANCE EVALUATION AND MONITORING OF PUBLIC HEALTH PROGRAM USING COMPOSITE PERFORMANCE INDEX

Directory of Open Access Journals (Sweden)

Susanta Kumar Gauri

2017-12-01

Full Text Available A public health program (PHP taken up by the government of a country refers to all organized measures to prevent disease and promote health among the population, by providing different planned cares/services to the people. Usually, the target population for different PHP are different. The basic requirement for success of a PHP is to ensure that all the planned cares/services are reached to each member of the target population. Therefore, the important performance measures for a PHP are the implementation status of all the planned cares/services under the PHP. However, management and monitoring of a PHP become quite difficult by interpreting separately the information contained in a large number of performance measures. Therefore, usually a metric, called composite performance index (CPI, is evaluated to understand the overall performance of a PHP. However, due a scaling operation involved in the CPI computation procedure, the CPI value does not reveal the true overall implementation status of a PHP and consequently, it is effective for management of a PHP. This paper presents a new approach for CPI computation, in which scaling/normalization of the performance variables is not required and therefore, it can be used for monitoring the true overall implementation status of a PHP in a region. A systematic approach for monitoring a PHP using the CPI values is proposed and applied for monitoring the maternal and child healthcare (MCH program. The results are found effective towards continuous improvement of implementation status.

[Selection of indicators for continuous monitoring of the impact of programs optimizing antimicrobial use in Primary Care].

Science.gov (United States)

Fernández-Urrusuno, Rocío; Flores-Dorado, Macarena; Moreno-Campoy, Eva; Montero-Balosa, M Carmen

2015-05-01

To determine core indicators for monitoring quality prescribing in Primary Care based on the evidence, and to assess the feasibility of these indicators for monitoring the use of antibiotics. A literature review was carried out on quality indicators for antimicrobial prescribing through an electronic search limited to the period 2001-2012. It was completed with an "ad hoc" search on the websites of public national and international health services. Finally, indicators were chosen by consensus by a multidisciplinary group of professionals dedicated to managing infections from several areas. The feasibility and applicability of these indicators was verified through the reporting and use of data in the prescription database. Twenty two indicators were found. The consensus group selected 16 indicators. Eleven of them measure the specific antimicrobial selection, and 5 are consumption rates. The indicators were successfully applied to the prescription database, being able to make comparisons between different geographical areas and to observe trends in prescriptions. The definition of a basic set of indicators to monitor antibiotic use adapted to local conditions is required. The results of these indicators can be used for feedback to professionals and for evaluating the impact of programs aimed at improving antimicrobial use. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Decision making concept of risk control: integration of decision criteria, top level risk indices and plant performance indices

International Nuclear Information System (INIS)

Vojnovic, D.; Mavko, B.; Kozuh, M.

1993-01-01

A support system for risk monitoring and control is suggested. The following concepts of system elements are briefly discussed: risk curve partitioning, the reliability cost function, the multi-objective optimization model, preference assessment, safety/risk indicators, and knowledge based systems. (Z.S.) 2 figs

Comparison of performance indicators of different types of reactors based on ISOE database

International Nuclear Information System (INIS)

Janzekovic, H.; Krizman, M.

2005-01-01

The optimisation of the operation of a nuclear power plant (NPP) is a challenging issue due to the fact that besides general management issues, a risk associated to nuclear facilities should be included. In order to optimise the radiation protection programmes in around 440 reactors in operation with more than 500 000 monitored workers each year, the international exchange of performance indicators (PI) related to radiation protection issues seems to be essential. Those indicators are a function of a type of a reactor as well as the age and the quality of the management of the reactor. in general three main types of radiation protection PI could be recognised. These are: occupational exposure of workers, public exposure and management of PI related to radioactive waste. The occupational exposure could be efficiently studied using ISOC database. The dependence of occupational exposure on different types of reactors, e.g. PWR, BWR, are given, analysed and compared. (authors)

Monitoring and evaluation of sport-based HIV/AIDS awareness programmes: Strengthening outcome indicators

Directory of Open Access Journals (Sweden)

Elma Nelisiwe Maleka

2017-01-01

Full Text Available There are number of Non-Governmental Organisations (NGOs in South Africa that use sport as a tool to respond to Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/AIDS, however, little is reported about the outcomes and impact of these programmes. The aim of this study is to contribute to a generic monitoring and evaluation framework by improving the options for the use of outcome indicators of sport-based HIV/AIDS awareness programmes of selected NGOs in South Africa. A qualitative method study was carried out with seven employees of five selected NGOs that integrate sport to deliver HIV/AIDS programmes in South Africa. The study further involved six specialists/experts involved in the field of HIV/AIDS and an official from Sport Recreation South Africa (SRSA. Multiple data collection instruments including desktop review, narrative systematic review, document analysis, one-on-one interviews and focus group interview were used to collect information on outcomes and indicators for sport-based HIV/AIDS awareness programmes. The information was classified according to the determinants of HIV/AIDS. The overall findings revealed that the sport-based HIV/AIDS awareness programmes of five selected NGOs examined in this study focus on similar HIV prevention messages within the key priorities highlighted in the current National Strategic Plan for HIV/AIDS, STIs and TB of South Africa. However, monitoring and evaluating outcomes of sport-based HIV/AIDS programmes of the selected NGOs remains a challenge. A need exists for the improvement of the outcome statements and indicators for their sport-based HIV/AIDS awareness programmes. This study proposed a total of 51 generic outcome indicators focusing on measuring change in the knowledge of HIV/AIDS and change in attitude and intention towards HIV risk behaviours. In addition, this study further proposed a total of eight generic outcome indicators to measure predictors of HIV risk behaviour

A biodiversity indicators dashboard: addressing challenges to monitoring progress towards the Aichi biodiversity targets using disaggregated global data.

Science.gov (United States)

Han, Xuemei; Smyth, Regan L; Young, Bruce E; Brooks, Thomas M; Sánchez de Lozada, Alexandra; Bubb, Philip; Butchart, Stuart H M; Larsen, Frank W; Hamilton, Healy; Hansen, Matthew C; Turner, Will R

2014-01-01

Recognizing the imperiled status of biodiversity and its benefit to human well-being, the world's governments committed in 2010 to take effective and urgent action to halt biodiversity loss through the Convention on Biological Diversity's "Aichi Targets". These targets, and many conservation programs, require monitoring to assess progress toward specific goals. However, comprehensive and easily understood information on biodiversity trends at appropriate spatial scales is often not available to the policy makers, managers, and scientists who require it. We surveyed conservation stakeholders in three geographically diverse regions of critical biodiversity concern (the Tropical Andes, the African Great Lakes, and the Greater Mekong) and found high demand for biodiversity indicator information but uneven availability. To begin to address this need, we present a biodiversity "dashboard"--a visualization of biodiversity indicators designed to enable tracking of biodiversity and conservation performance data in a clear, user-friendly format. This builds on previous, more conceptual, indicator work to create an operationalized online interface communicating multiple indicators at multiple spatial scales. We structured this dashboard around the Pressure-State-Response-Benefit framework, selecting four indicators to measure pressure on biodiversity (deforestation rate), state of species (Red List Index), conservation response (protection of key biodiversity areas), and benefits to human populations (freshwater provision). Disaggregating global data, we present dashboard maps and graphics for the three regions surveyed and their component countries. These visualizations provide charts showing regional and national trends and lay the foundation for a web-enabled, interactive biodiversity indicators dashboard. This new tool can help track progress toward the Aichi Targets, support national monitoring and reporting, and inform outcome-based policy-making for the protection of

A biodiversity indicators dashboard: addressing challenges to monitoring progress towards the Aichi biodiversity targets using disaggregated global data.

Directory of Open Access Journals (Sweden)

Xuemei Han

Full Text Available Recognizing the imperiled status of biodiversity and its benefit to human well-being, the world's governments committed in 2010 to take effective and urgent action to halt biodiversity loss through the Convention on Biological Diversity's "Aichi Targets". These targets, and many conservation programs, require monitoring to assess progress toward specific goals. However, comprehensive and easily understood information on biodiversity trends at appropriate spatial scales is often not available to the policy makers, managers, and scientists who require it. We surveyed conservation stakeholders in three geographically diverse regions of critical biodiversity concern (the Tropical Andes, the African Great Lakes, and the Greater Mekong and found high demand for biodiversity indicator information but uneven availability. To begin to address this need, we present a biodiversity "dashboard"--a visualization of biodiversity indicators designed to enable tracking of biodiversity and conservation performance data in a clear, user-friendly format. This builds on previous, more conceptual, indicator work to create an operationalized online interface communicating multiple indicators at multiple spatial scales. We structured this dashboard around the Pressure-State-Response-Benefit framework, selecting four indicators to measure pressure on biodiversity (deforestation rate, state of species (Red List Index, conservation response (protection of key biodiversity areas, and benefits to human populations (freshwater provision. Disaggregating global data, we present dashboard maps and graphics for the three regions surveyed and their component countries. These visualizations provide charts showing regional and national trends and lay the foundation for a web-enabled, interactive biodiversity indicators dashboard. This new tool can help track progress toward the Aichi Targets, support national monitoring and reporting, and inform outcome-based policy-making for the

A Biodiversity Indicators Dashboard: Addressing Challenges to Monitoring Progress towards the Aichi Biodiversity Targets Using Disaggregated Global Data

Science.gov (United States)

Han, Xuemei; Smyth, Regan L.; Young, Bruce E.; Brooks, Thomas M.; Sánchez de Lozada, Alexandra; Bubb, Philip; Butchart, Stuart H. M.; Larsen, Frank W.; Hamilton, Healy; Hansen, Matthew C.; Turner, Will R.

2014-01-01

Recognizing the imperiled status of biodiversity and its benefit to human well-being, the world's governments committed in 2010 to take effective and urgent action to halt biodiversity loss through the Convention on Biological Diversity's “Aichi Targets”. These targets, and many conservation programs, require monitoring to assess progress toward specific goals. However, comprehensive and easily understood information on biodiversity trends at appropriate spatial scales is often not available to the policy makers, managers, and scientists who require it. We surveyed conservation stakeholders in three geographically diverse regions of critical biodiversity concern (the Tropical Andes, the African Great Lakes, and the Greater Mekong) and found high demand for biodiversity indicator information but uneven availability. To begin to address this need, we present a biodiversity “dashboard” – a visualization of biodiversity indicators designed to enable tracking of biodiversity and conservation performance data in a clear, user-friendly format. This builds on previous, more conceptual, indicator work to create an operationalized online interface communicating multiple indicators at multiple spatial scales. We structured this dashboard around the Pressure-State-Response-Benefit framework, selecting four indicators to measure pressure on biodiversity (deforestation rate), state of species (Red List Index), conservation response (protection of key biodiversity areas), and benefits to human populations (freshwater provision). Disaggregating global data, we present dashboard maps and graphics for the three regions surveyed and their component countries. These visualizations provide charts showing regional and national trends and lay the foundation for a web-enabled, interactive biodiversity indicators dashboard. This new tool can help track progress toward the Aichi Targets, support national monitoring and reporting, and inform outcome-based policy-making for the

Lichen elements as pollution indicators: evaluation of methods for large monitoring programmes

Science.gov (United States)

Susan Will-Wolf; Sarah Jovan; Michael C. Amacher

2017-01-01

Lichen element content is a reliable indicator for relative air pollution load in research and monitoring programmes requiring both efficiency and representation of many sites. We tested the value of costly rigorous field and handling protocols for sample element analysis using five lichen species. No relaxation of rigour was supported; four relaxed protocols generated...

Performance indicator of a bridge expansion joint

NARCIS (Netherlands)

Kalkman, I.M.; Lentzen, S.S.K.; Courage, W.M.G.; Napoles, O.M.; Galanti, F.M.B.

2011-01-01

In general the condition of a structure can be assessed in terms of a performance indicator. For example, this can be the strength of a structure. An asset manager is concerned with ensuring that the performance of a structure does not fall below a given minimum level. This can be achieved by

Validity of Mind Monitoring System as a Mental Health Indicator using Voice

Directory of Open Access Journals (Sweden)

Naoki Hagiwara

2017-05-01

Full Text Available We have been developing a method of evaluating the mental health condition of a person based on the sound of their voice. Currently, we have applied this technology to create a smartphone application that shows the vitality and the mental activity as mental health condition indices. Using voice to measure one’s mental health condition is a non-invasive method. Moreover, this application can be used continually through a smartphone call. Unlike a periodic checkup every year, it could be used for monitoring on a daily basis. The purpose of this study is to compare the vitality index to the widely used Beck depression inventory (BDI and to evaluate its validity. This experiment was conducted at the Center of Innovation Program of the University of Tokyo with 50 employees of one corporation as participants between early December 2015 and early February 2016. Each participant was given a smartphone with our application that recorded his/her voice automatically during calls. In addition, the participants had to read and record a fixed phrase daily. The BDI test was conducted at the beginning of the experimental period. The vitality index was calculated based on the voice data collected during the first two weeks of the experiment and was considered as the vitality index at the time when the BDI test was conducted. When the vitality and the mental activity indicators were compared to BDI score, we found that there was a negative correlation between the BDI score and these indices. Additionally, these indices were a useful method to discriminate a participant of high risk of disease with a high BDI score. And the mental activity index shows a higher performance than the vitality index.

PROPOSAL OF A MINIMUM SET OF BIOPHYSICAL INDICATORS FOR MONITORING THE SUSTAINABILITY IN AGROFORESTRY SYSTEMS

Directory of Open Access Journals (Sweden)

Omar Daniel

2001-01-01

Full Text Available Agroforestry Systems are considered sustainable alternatives to intensive production systems and due to the scarcity of research work related to the evaluation of sustainability of Agroforestry Systems, selection criteria are proposed which were applied to indicators already known in the pertinent literature. The objective of this paper comprised therefore the use of the smallest group of indicators which would be able to satisfy the requirements for monitoring environmental sustainability of Agroforestry Systems including or not the animal component. The main conclusions were: the category of endogenous resources involved the greatest number of indicators in the biophysical component; the greatest concentration of indicators in the category of endogenous resources is located in the fauna, flora and soil components; the element technical management showed the major occurrence of indicators in the category of operation of the system; all elements of the category of exogenous resources showed about the same number of indicators; the animal component of the Agroforestry Systems require greater number of indicators; the majority of the indicators suggested in this paper depend only upon the direct observations and only a small number need laboratorial analyses; most indicators suggested is cheap and easy to apply; Agroforestry Systems without the animal component are easier and cheapes to monitor.

UCIMS: Advances in geotechnical construction and performance monitoring

Directory of Open Access Journals (Sweden)

Raphael Siebenmann

2015-04-01

Full Text Available The Crossrail project currently under construction in Central London has been described as “The Big Dig on Steroids”, obviously referencing the Central Artery/Tunnel project in Boston completed in 2007. To address the multiple demands for timely construction performance monitoring, Crossrail envisioned the underground construction information management system (UCIMS to monitor construction progress and structural health along the entire route, with a network of geotechnical instruments (i.e. slope inclinometers, extensometers, piezometers, etc. and tunnel boring machine (TBM position information. The UCIMS is a geospatially referenced relational database that was developed using an open source geographic information system (GIS that allowed all stakeholders near immediate feedback of construction performance. The purpose of this article is to provide a brief history of geotechnical and structural monitoring software, to describe the structure and operation of the UCIMS, and to demonstrate how the functionality afforded by this system provided the requisite feedback to the stakeholders. Examples will be given regarding how the data management and visualization concepts incorporated into the UCIMS advanced the geotechnical construction industry.

Preliminary Analysis of Remote Monitoring and Robotic Concepts for Performance Confirmation

International Nuclear Information System (INIS)

McAffee, D.A.

1997-01-01

As defined in 10 CFR Part 60.2, Performance Confirmation is the ''program of tests, experiments and analyses which is conducted to evaluate the accuracy and adequacy of the information used to determine with reasonable assurance that the performance objectives for the period after permanent closure will be met''. The overall Performance Confirmation program begins during site characterization and continues up to repository closure. The main purpose of this document is to develop, explore and analyze initial concepts for using remotely operated and robotic systems in gathering repository performance information during Performance Confirmation. This analysis focuses primarily on possible Performance Confirmation related applications within the emplacement drifts after waste packages have been emplaced (post-emplacement) and before permanent closure of the repository (preclosure). This will be a period of time lasting approximately 100 years and basically coincides with the Caretaker phase of the project. This analysis also examines, to a lesser extent, some applications related to Caretaker operations. A previous report examined remote handling and robotic technologies that could be employed during the waste package emplacement phase of the project (Reference 5.1). This analysis is being prepared to provide an early investigation of possible design concepts and technical challenges associated with developing remote systems for monitoring and inspecting activities during Performance Confirmation. The writing of this analysis preceded formal development of Performance Confirmation functional requirements and program plans and therefore examines, in part, the fundamental Performance Confirmation monitoring needs and operating conditions. The scope and primary objectives of this analysis are to: (1) Describe the operating environment and conditions expected in the emplacement drifts during the preclosure period. (Presented in Section 7.2). (2) Identify and discuss the

Quantifying Averted Disability-Adjusted Life Years as a Performance Indicator for Water Quality Interventions: A Review of Current Methodologies and Challenges

Directory of Open Access Journals (Sweden)

Darcy M. Anderson

2018-06-01

Full Text Available Sustainable access to safe drinking water protects against infectious disease and promotes overall health. Despite considerable progress toward increasing water access, safe water quality and reliable service delivery remain a challenge. Traditional financing strategies pay implementers based on inputs and activities, with minimal incentives for water quality monitoring and sustained service operation. Pay-for-performance offers an alternative financing strategy that delivers all or a portion of payment based on performance indicators of desired outputs or outcomes. A pay-for-performance approach in the water sector could quantify and incentivize health impact. Averted disability-adjusted life years (ADALYs have been used as a performance indicator to measure the burden of disease averted due to environmental health interventions. Water-related disease burden can be measured for application as an ADALYs performance indicator following either comparative risk assessment or quantitative microbial risk assessment. Comparative risk assessment models disease burden using water source type as a proxy indicator of microbial water quality, while quantitative microbial risk assessment models disease burden using concentrations of indicator pathogens. This paper compares these risk assessment methodologies, and summarizes the limitations of applying these approaches toward quantifying ADALYs as a performance indicator for water quality interventions.

Process-oriented performance indicators for measuring ecodesign management practices

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

In order to support ecodesign performance measurement from a business perspective, this paper performs an exploration of available process-oriented indicators to be applied to ecodesign management practices. With the Ecodesign Maturity Model as a background framework, a systematic literature review...... coupled with a cross-content analysis was carried out to assign proper indicators to the practices. Results show that the currently available indicators do not fully reflect the characteristics of ecodesign and there is significant room for improving the development of tailor-made indicators....

Safety assessment, safety performance indicators at the Paks Nuclear Power Plant

International Nuclear Information System (INIS)

Baji, C.; Vamos, G.; Toth, J.

2001-01-01

The Paks Nuclear Power Plant has been using different methods of safety assessment (event analysis, self-assessment, probabilistic safety analysis), including performance indicators characterizing both operational and safety performance since the early years of operation of the plant. Regarding the safety performance, the indicators include safety system performance, number of scrams, release of radioactive materials, number of safety significant events, industrial safety indicator, etc. The Paks NPP also reports a set of ten indicators to WANO Performance Indicator Programme which, among others, include safety related indicators as well. However, a more systematic approach to structuring and trending safety indicators is needed so that they can contribute to the enhancement of the operational safety. A more comprehensive set of indicators and a systematic evaluation process was introduced in 1996. The performance indicators framework proposed by the IAEA was adapted to Paks in this year to further improve the process. Safety culture assessment and characterizing safety culture is part of the assessment process. (author)

Empirical Study on the Indicators of Sustainable Performance – the Sustainability Balanced Scorecard, Effect of Strategic Organizational Change

Directory of Open Access Journals (Sweden)

Maria Radu

2012-06-01

Full Text Available The sustainable organizational change has an ever increasing importance, leading to the rethinking of the management and systems of performance measurement and monitoring within the companies. As a reaction to current economic phenomena, in the first section of this work we tried to bring out the need for using the couple Balanced Scorecard - Corporate Social Responsibility by companies. Thus, companies involved in sustainable actions must grant a great importance to the impact of environmental, social and economic factors in providing added value, informing the interested parties and reflecting the reporting of sustainable performance. As a consequence, in the second part of the work we present the Sustainability Balanced Scorecard for the implementation of efficient strategies which cumulate the economic, social and environmental aspects as integrating system for sustainable performance and as a new challenge for organizational change. The key performance indicators included in the Sustainability Balanced Scorecard are quantified by the indicators of sustainable development, based on which the empirical research described in the third section of the work was achieved. Through the quantitative analysis of the economic and ecological indicators (Gross Domestic Product per capita, respective, Environmental Performance Index in correlation with the social indicator (Global Competitive Index, we conclude that the implementation of green strategies by companies leads to sustainable economic growth.

Monitoring the performance of off-site processors

International Nuclear Information System (INIS)

Miller, C.C.

1995-01-01

Commercial nuclear power plants have been able to utilize the latest technologies and achieve large volume reduction by obtaining off-site waste processor services. Although the use of such services reduce the burden of waste processing it also reduces the utility's control over the process. Monitoring the performance of off-site processors is important so that the utility is cognizant of the waste disposition for required regulatory reporting. In addition to obtaining data for Reg Guide 1.21 reporting, Performance monitoring is important to determine which vendor and which services to utilize. Off-site processor services were initially offered for the decontamination of metallic waste. Since that time the list of services has expanded to include supercompaction, survey for release, incineration and metal melting. The number of vendors offering off-site services has increased and the services they offer vary. processing rates vary between vendors and have different charge bases. Determining which vendor to use for what service can be complicated and confusing

Use of indicator items to monitor marine debris on a New Jersey beach from 1991 to 1996

Science.gov (United States)

Ribic, C.A.

1998-01-01

The US National Marine Debris Monitoring Program is using indicator items from beach surveys to identify whether amounts of marine debris are changing over time. Indicator items were selected through expert opinion and assumed to reflect the trend of all debris. We used monthly data from a 1991-1996 study of debris on a New Jersey beach to determine if indicator and non-indicator items showed similar trends. Total indicator debris levels did not change; this was true regardless of probable source. Non-indicator debris increased about 40% annually. Plastic non-indicator items increased regardless of whether items were whole items, cigarette filters, or pieces. Of the whole items, almost 50% were plastic lids, cups, and utensils, and about 25% were drug-related paraphernalia, tobacco-related products, plastic stirrers, pull rings, and fireworks. When indicator items are used in a monitoring programme to reflect total debris patterns, concordance of trends in indicator and non-indicator debris should be checked.

Standard guide to In-Plant performance evaluation of Hand-Held SNM monitors

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This guide is one of a series on the application and evaluation of special nuclear material (SNM) monitors. Other guides in the series are listed in Section 2, and the relationship of in-plant performance evaluation to other procedures described in the series is illustrated in Fig. 1. Hand-held SNM monitors are described in of Guide C1112, and performance criteria illustrating their capabilities can be found in Appendix X1. 1.2 The purpose of this guide to in-plant performance evaluation is to provide a comparatively rapid procedure to verify that a hand-held SNM monitor performs as expected for detecting SNM or alternative test sources or to disclose the need for repair. The procedure can be used as a routine operational evaluation or it can be used to verify performance after a monitor is calibrated. 1.3 In-plant performance evaluations are more comprehensive than daily functional tests. They take place less often, at intervals ranging from weekly to once every three months, and derive their result fr...

CLASSIFICATION OF THE MGR PERFORMANCE CONFIRMATION DATA ACQUISITION/MONITORING SYSTEM

International Nuclear Information System (INIS)

J.A. Ziegler

1999-01-01

The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) performance confirmation data acquisition/monitoring system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMF 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333PY ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

Appraisal of key performance indicators on road infrastructure ...

African Journals Online (AJOL)

As Public-Private Partnerships (PPPs) are being practiced in most parts of the world, the need to adopt a system mechanism to evaluate the performance is imperative. The paper evaluates sustainable key performance indicators (KPIs) with a view to appreciating times of improved performance or otherwise. Eleven ...

Cyanobacteria, Toxins and Indicators: Field Monitoring,Treatment Facility Monitoring and Treatment Studies

Science.gov (United States)

This presentation is a compilation of harmful algal bloom (HAB) related field monitoring data from the 2015 bloom season, treatment plant monitoring data from the 2013 and 2014 bloom seasons, and bench-scale treatment study data from 2015.

Proportional incidence and radiological review of large (T2+) breast cancers as surrogate indicators of screening programme performance

International Nuclear Information System (INIS)

Ciatto, S.; Bernardi, D.; Pellegrini, M.; Borsato, G.; Peterlongo, P.; Gentilini, M.A.; Caumo, F.; Frigerio, A.; Houssami, N.

2012-01-01

Surrogate measures of screening performance [e.g. interval cancer (IC) proportional incidence] allow timely monitoring of sensitivity and quality. This study explored measures using large (T2+) breast cancers as potential indicators of screening performance. The proportional incidence of T2+ cancers (observed/expected cases) in a population-based screening programme (Trento, 2001-2009) was estimated. A parallel review of 'negative' preceding mammograms for screen-detected T2+ and for all ICs, using 'blinded' independent readings and case-mixes (54 T2+, 50 ICs, 170 controls) was also performed. T2+ cancers were observed in 168 screening participants: 48 at first screen, 67 at repeat screening and 53 ICs. The T2+ estimated proportional incidence was 68% (observed/expected = 168/247), corresponding to an estimated 32% reduction in the rate of T2+ cancers in screening participants relative to that expected without screening. Majority review classified 27.8% (15/54) of T2+ and 28% (14/50) of ICs as screening error (P = 0.84), with variable recall rates amongst radiologists (8.8-15.2%). T2+ review could be integrated as part of quality monitoring and potentially prove more feasible than IC review for some screening services. circle Interval breast cancers, assumed as screening failures, are monitored to estimate screening performance circle Large (T2+) cancers at screening may also represent failed prior screening detection circle Analysis of T2+ lesions may be more feasible than assessing interval cancers circle Analysis of T2+ cancers is a potential further measure of screening performance. (orig.)

Proportional incidence and radiological review of large (T2+) breast cancers as surrogate indicators of screening programme performance

Energy Technology Data Exchange (ETDEWEB)

Ciatto, S.; Bernardi, D.; Pellegrini, M.; Borsato, G.; Peterlongo, P. [APSS, U.O. Senologia Clinica e Screening Mammografico, Dipartimento di Radiodiagnostica, Trento (Italy); Gentilini, M.A. [APSS, Servizio Osservatorio Epidemiologico, Direzione promozione ed educazione alla salute, Trento (Italy); Caumo, F. [Centro di Prevenzione Senologica, Verona (Italy); Frigerio, A. [CRR, Centro di Riferimento Regionale per lo Screening Mammografico, Torino (Italy); Houssami, N. [University of Sydney, Screening and Test Evaluation Program, School of Public Health, Sydney Medical School, Sydney (Australia)

2012-06-15

Surrogate measures of screening performance [e.g. interval cancer (IC) proportional incidence] allow timely monitoring of sensitivity and quality. This study explored measures using large (T2+) breast cancers as potential indicators of screening performance. The proportional incidence of T2+ cancers (observed/expected cases) in a population-based screening programme (Trento, 2001-2009) was estimated. A parallel review of 'negative' preceding mammograms for screen-detected T2+ and for all ICs, using 'blinded' independent readings and case-mixes (54 T2+, 50 ICs, 170 controls) was also performed. T2+ cancers were observed in 168 screening participants: 48 at first screen, 67 at repeat screening and 53 ICs. The T2+ estimated proportional incidence was 68% (observed/expected = 168/247), corresponding to an estimated 32% reduction in the rate of T2+ cancers in screening participants relative to that expected without screening. Majority review classified 27.8% (15/54) of T2+ and 28% (14/50) of ICs as screening error (P = 0.84), with variable recall rates amongst radiologists (8.8-15.2%). T2+ review could be integrated as part of quality monitoring and potentially prove more feasible than IC review for some screening services. circle Interval breast cancers, assumed as screening failures, are monitored to estimate screening performance circle Large (T2+) cancers at screening may also represent failed prior screening detection circle Analysis of T2+ lesions may be more feasible than assessing interval cancers circle Analysis of T2+ cancers is a potential further measure of screening performance. (orig.)

Environmental performance, profitability, asset utilization, debt monitoring and firm value

Science.gov (United States)

Bukit, R. Br; Haryanto, B.; Ginting, P.

2018-02-01

The growing issue on firm value shows that firm value is not only determined by the firm ability to increase financial profit, but also by the company's concern in maintaining the environmental condition. The industrial development produces waste that pollutes the environment that has potential to serious impact on the next life. In addition to provide financial benefits, companies are increasingly facing pressure to be socially responsible for the survival of the company. However, past findings demonstrate that the effect of environmental performance, profitability, and asset utilization to the firm’s value are still unclear. This study aims to test whether environmental performance, firm profitability and asset utilization can effectively enhance firm value in two different conditions: intensive debt monitoring and less intensive debt monitoring. Sample of companies is taken from the list of Indonesia Stock Exchange during the period of 2013 to 2015. Using multiple regression analysis, discloses that: in intensive monitoring, managers tend to have high firm value when company has high environmental performance and or high profitability and high asset utilization. Monitoring system needs to be intensified especially for companies with the above characteristics.

Facilities Performance Indicators Report, 2006-07

Science.gov (United States)

Glazner, Steve, Ed.

2008-01-01

The "Facilities Performance Indicators Survey" ("FPI") supersedes and builds upon the two major surveys APPA conducted in the past: the Comparative Costs and Staffing (CCAS) survey and the Strategic Assessment Model (SAM). The "FPI" covers all the materials collected in CCAS and SAM, along with some select new data points and improved survey…

PERFORMANCE INDICATORS APPLIED TO BRAZILIAN PRIVATE EDUCATIONAL INSTITUTIONS

Directory of Open Access Journals (Sweden)

Átila de Melo Lira

2015-06-01

Full Text Available Initially focused on for-profit companies the Balance Scorecard (BSC has been adopted by many organizations with different objectives, such as higher education institutions (HEIs. However, it is not clear if the adoption of the BSC model is appropriate, or yet is hard to perceive how HEIs have modified and implemented this tool for evaluating educational institutions, public or privates, in Brazil. This study aims to fill the gap existent in the context of using the BSC in organizations. We intend to demonstrate how these organizations use performance indicators to measure their primary activities. A quantitative and exploratory study was developed from the analysis of performance indicators found in the web sites to Brazilian universities. A total of 91 Brazilian private universities evaluation process were reviewed. Even with a considerable amount of private HEIs there are few that have performance indicators guided by numerical and statistical data covering its main activities which is a concern for their managers in terms of managerial control.

Defining a common set of indicators to monitor road accidents in the European Union

Science.gov (United States)

Farchi, Sara; Molino, Nunzio; Giorgi Rossi, Paolo; Borgia, Piero; Krzyzanowski, Michael; Dalbokova, Dafina; Kim, Rokho

2006-01-01

Background currently road accidents are mostly monitored through mortality and injury rates. This paper reports the methodology and the results of a project set forth by the European Union (EU) and coordinated by the WHO aimed at identifying and evaluating a core set of indicators to monitor the causal chain of road accident health effects. The project is part of the ECOEHIS (Development of Environment and Health Indicators for European Union Countries). Methods a group of experts (WG), identified 14 indicators after a review of the information collected at the EU level, each of them representing a specific aspect of the DPSEEA (Driving, Pressure, State, Exposure, Effect, Action) model applied and adapted to the road accidents. Each indicator was scored according to a list of 16 criteria chosen by the WG. Those found to have a high score were analysed to determine if they were compatible with EU legislation and then tested in the feasibility study. Results 11 of the 14 indicators found to be relevant and compatible with the criteria of selection were proposed for the feasibility study. Mortality, injury, road accident rate, age of vehicle fleet, and distance travelled are the indicators recommended for immediate implementation. Conclusion after overcoming the limitations that emerged (absence of a common definition of death by road accident and injury severity, underestimation of injuries, differences in information quality) this core set of indicators will allow Member States to carry out effective internal/external comparisons over time. PMID:16834780

Key performance indicators in hospital based on balanced scorecard model

Directory of Open Access Journals (Sweden)

Hamed Rahimi

2017-01-01

Full Text Available Introduction: Performance measurement is receiving increasing verification all over the world. Nowadays in a lot of organizations, irrespective of their type or size, performance evaluation is the main concern and a key issue for top administrators. The purpose of this study is to organize suitable key performance indicators (KPIs for hospitals’ performance evaluation based on the balanced scorecard (BSC. Method: This is a mixed method study. In order to identify the hospital’s performance indicators (HPI, first related literature was reviewed and then the experts’ panel and Delphi method were used. In this study, two rounds were needed for the desired level of consensus. The experts rated the importance of the indicators, on a five-point Likert scale. In the consensus calculation, the consensus percentage was calculated by classifying the values 1-3 as not important (0 and 4-5 to (1 as important. Simple additive weighting technique was used to rank the indicators and select hospital’s KPIs. The data were analyzed by Excel 2010 software. Results: About 218 indicators were obtained from a review of selected literature. Through internal expert panel, 77 indicators were selected. Finally, 22 were selected for KPIs of hospitals. Ten indicators were selected in internal process perspective and 5, 4, and 3 indicators in finance, learning and growth, and customer, respectively. Conclusion: This model can be a useful tool for evaluating and comparing the performance of hospitals. However, this model is flexible and can be adjusted according to differences in the target hospitals. This study can be beneficial for hospital administrators and it can help them to change their perspective about performance evaluation.

Establishing reliability of performance indicator of sepak takraw ...

African Journals Online (AJOL)

The aim of this study is to establish the necessary reliability in the notational analysis of sepak takraw. Two performance analysts were recruited to help in the collection of the data. The performances were analyzed based on the main performance indicators relevant to the demand of the game. Cronbach's alpha and ...

20 CFR 641.710 - How are the performance indicators defined?

Science.gov (United States)

2010-04-01

... customer satisfaction surveys administered to each of these three customer groups. The Department will... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How are the performance indicators defined... § 641.710 How are the performance indicators defined? (a) The core indicators are defined as follows: (1...

Key Performance Indicators in Radiology: You Can't Manage What You Can't Measure.

Science.gov (United States)

Harvey, H Benjamin; Hassanzadeh, Elmira; Aran, Shima; Rosenthal, Daniel I; Thrall, James H; Abujudeh, Hani H

2016-01-01

Quality assurance (QA) is a fundamental component of every successful radiology operation. A radiology QA program must be able to efficiently and effectively monitor and respond to quality problems. However, as radiology QA has expanded into the depths of radiology operations, the task of defining and measuring quality has become more difficult. Key performance indicators (KPIs) are highly valuable data points and measurement tools that can be used to monitor and evaluate the quality of services provided by a radiology operation. As such, KPIs empower a radiology QA program to bridge normative understandings of health care quality with on-the-ground quality management. This review introduces the importance of KPIs in health care QA, a framework for structuring KPIs, a method to identify and tailor KPIs, and strategies to analyze and communicate KPI data that would drive process improvement. Adopting a KPI-driven QA program is both good for patient care and allows a radiology operation to demonstrate measurable value to other health care stakeholders. Copyright © 2015 Mosby, Inc. All rights reserved.

Impact of ANSI 2009 criteria for performance testing in TLD personnel monitoring

International Nuclear Information System (INIS)

MeenaI, P.; Rakesh, R.B.; Srivastava, Kshama; KoIambe, D.H.; Sapra, B.K.

2014-01-01

External Quality Assurance in TLD Personnel Monitoring Service was initiated in 1985, for periodic performance evaluation of various TLD Laboratories through postal exercise. Presently, all the 16 laboratories involved in Personnel Monitoring Service are covered under QA exercise. Since beginning, American National Standards Institute (ANSI) criteria have been adopted for performance testing in QA exercise. Presently, ANSI 2001 performance criteria along with ISO trumpet curve analysis method are being used for performance evaluation. In 2009, ANSI modified the performance evaluation criteria and this study evaluates its impact and feasibility of implementation of ANSI 2009 criteria in the quality assurance program for personnel monitoring. The performance of some laboratories evaluated using both ANSI 2001 and ANSI 2009 criteria have been discussed. The study shows that the ANSI 2009 criteria is more stringent and encourages even distribution of bias and standard deviation. This can be implemented with suitable modifications for performance evaluation

Performance monitoring pavements with thermal segregation in Texas.

Science.gov (United States)

2012-04-01

This project conducted work to investigate the performance of asphalt surface mixtures that exhibited : thermal segregation during construction. From 2004 to 2009, a total of 14 construction projects were : identified for monitoring. Five of these pr...

Facilities Performance Indicators Report 2012-13: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2014

2014-01-01

This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance Indicators Report" is designed for survey…

Seismic Monitoring To Assess Performance Of Structures In Near-Real Time: Recent Progress

International Nuclear Information System (INIS)

Celebi, Mehmet

2008-01-01

Earlier papers have described how observed data from classical accelerometers deployed in structures or from differential GPS with high sampling ratios deployed at roofs of tall buildings can be configured to establish seismic health monitoring of structures. In these configurations, drift ratios 1 are the main parametric indicator of damage condition of a structure or component of a structure.Real-time measurement of displacements are acquired either by double integration of accelerometer time-series data, or by directly using GPS. Recorded sensor data is then related to the performance level of a building. Performance-based design method stipulates that for a building the amplitude of relative displacement of the roof of a building (with respect to its base) indicates its performance.Usually, drift ratio is computed using relative displacement between two consecutive floors. When accelerometers are used, a specific software is used to compute displacements and drift ratios in realtime by double integration of accelerometer data from several floors. However, GPS-measured relative displacements are limited to being acquired only at the roof with respect to its reference base. Thus, computed drift ratio is the average drift ratio for the whole building. Until recently, the validity of measurements using GPS was limited to long-period structures (T>1 s) because GPS systems readily available were limited to 10-20 samples per seconds (sps) capability. However, presently, up to 50 sps differential GPS systems are available on the market and have been successfully used to monitor drift ratios [1,2]--thus enabling future usefulness of GPS to all types of structures. Several levels of threshold drift ratios can be postulated in order to make decisions for inspections and/or occupancy.Experience with data acquired from both accelerometers and GPS deployments indicates that they are reliable and provide pragmatic alternatives to alert the owners and other authorized parties

Performance Indicators for Online Geography in Secondary Education

NARCIS (Netherlands)

van Diepen, P.; Bredeweg, B.; Bosse, T.; Bredeweg, B.

2016-01-01

There is little consensus about what variables extracted from learner data are the most reliable indicators of learning performance. The aim of this study was to determine those indicators by taking a wide range of variables into consideration concerning overall learning activity and content

Designing environmental performance indicators (EPIs) for eco-efficiency

International Nuclear Information System (INIS)

Campbell, B.

1997-01-01

Environmental performance indicators (EPI) were discussed and a method by which companies can design indicators to help measure their progress toward greater eco-efficiency was presented. EPIs are quantitative measures of environmental performance. EPIs can measure one attribute, such as effluent released to water, or they can be a complex index. EPIs track impacts on the environment and provide information for decision making. The need for more eco-efficient companies, i.e. companies that produce useful goods and services while reducing their consumption of resources and while making efforts to reduce pollution, was emphasized

Engineering performance indicators in support of corporate goals and objectives

International Nuclear Information System (INIS)

Prawlocki, F.C.; Holland, M.B.

1992-01-01

In the late 1980s, a new factor was introduced into the equation of rate making: competition. Prior to this time, most utilities only had to prove to the state public service commission (PSC) that a rate increase was justified. Even this had become more difficult in recent years as PSCs implemented prudency audits as a means of determining the efficiency of utility management. Recently, however, the need for performance improvement has been initiated internally by utility management because of the advent of competition in the utility environment and state PSC inquiries. In 1991, TVA began to realign its traditional program of performance indicators to agree with industry standards and provide more extensive indicators of positive and negative trends in performance. The INPO Guideline 88-016, Guidelines for the Conduct of Design Engineering, was used as the basis for most indicators. In addition, indicators were added to highlight specific corporate objectives, problems, or regulatory commitments. The indicators are being initiated in three phases as efficient sources of performance data are identified. Once the current baseline was established, a review was made of the best utilities in the country based on the US Nuclear Regulatory Commission's systematic assessment of licensee's performance and INPO performance indicators to establish performance goals. As total quality management and cycle time reduction programs are implemented, all of the organization's annual goals and objectives are expected to more closely reflect the best of the industry

EnergiTools. A methodology for performance monitoring and diagnosis

International Nuclear Information System (INIS)

Ancion, P.; Bastien, R.; Ringdahl, K.

2000-01-01

EnergiTools is a performance monitoring and diagnostic tool that combines the power of on-line process data acquisition with advanced diagnosis methodologies. Analytical models based on thermodynamic principles are combined with neural networks to validate sensor data and to estimate missing or faulty measurements. Advanced diagnostic technologies are then applied to point out potential faults and areas to be investigated further. The diagnosis methodologies are based on Bayesian belief networks. Expert knowledge is captured in the form of the fault-symptom relationships and includes historical information as the likelihood of faults and symptoms. The methodology produces the likelihood of component failure root causes using the expert knowledge base. EnergiTools is used at Ringhals nuclear power plants. It has led to the diagnosis of various performance issues. Three case studies based on this plant data and model are presented and illustrate the diagnosis support methodologies implemented in EnergiTools . In the first case, the analytical data qualification technique points out several faulty measurements. The application of a neural network for the estimation of the nuclear reactor power by interpreting several plant indicators is then illustrated. The use of the Bayesian belief networks is finally described. (author)

Performance monitoring in obsessive-compulsive undergraduates: Effects of task difficulty.

Science.gov (United States)

Riesel, Anja; Richter, Anika; Kaufmann, Christian; Kathmann, Norbert; Endrass, Tanja

2015-08-01

Both obsessive-compulsive disorder and subclinical obsessive-compulsive (OC) symptoms seem to be associated with hyperactive error-related brain activity. The current study examined performance monitoring in subjects with subclinical OC symptoms using a new task with different levels of difficulty. Nineteen subjects with high and 18 subjects with low OC characteristics performed a random dot cinematogram (RDC) task with three levels of difficulty. The high and low OC groups did not differ in error-related negativity (ERN), correct-related negativity (CRN) and performance irrespective of task difficulty. The amplitude of the ERN decreased with increasing difficulty whereas the magnitude of CRN did not vary. ERN and CRN approached in size and topography with increasing difficulty, which suggests that errors and correct responses are processed more similarly. These results add to a growing number of studies that fail to replicate hyperactive performance monitoring in individuals with OC symptoms in task with higher difficulty or requiring learning. Together with these findings our results suggest that the relationship between OC symptoms and performance monitoring may be sensitive to type of task and task characteristics and cannot be observed in a RDC that differs from typically used tasks in difficulty and the amount of response-conflict. Copyright © 2015 Elsevier Inc. All rights reserved.

12 CFR 621.10 - Monitoring of performance categories and other property owned.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Monitoring of performance categories and other property owned. 621.10 Section 621.10 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ACCOUNTING AND REPORTING REQUIREMENTS Loan Performance and Valuation Assessment § 621.10 Monitoring of...

Game Indicators Determining Sports Performance in the NBA.

Science.gov (United States)

Mikołajec, Kazimierz; Maszczyk, Adam; Zając, Tomasz

2013-01-01

The main goal of the present study was to identify basketball game performance indicators which best determine sports level in the National Basketball Association (NBA) league. The research material consisted of all NBA game statistics at the turn of eight seasons (2003-11) and included 52 performance variables. Through detailed analysis the variables with high influence on game effectiveness were selected for final procedures. It has been proven that a limited number of factors, mostly offensive, determines sports performance in the NBA. The most critical indicators are: Win%, Offensive EFF, 3rd Quarter PPG, Win% CG, Avg Fauls and Avg Steals. In practical applications these results connected with top teams and elite players may help coaches to design better training programs.

Information Security Governanceas as Key Performance Indicator for Financial Institutions

OpenAIRE

Krjukovs, D; Strauss, R

2009-01-01

Due to their nature financial institutions and their performance are in constant focus of attention from different stakeholder groups. These groups according to their functions and interests are implementing different sets of key performance indicators for financial institution performance assessment. In the proposed paper authors present a hypothesis of information security governance being a financial institution key performance indicator. Authors provide high level overview of ...

Analyzing key performance indicators (KPIs) for E-commerce and Internet marketing of elderly products: a review.

Science.gov (United States)

Tsai, Yuan-Cheng; Cheng, Yu-Tien

2012-01-01

With the transformation of its population structure and economic environment, Taiwan is rapidly becoming an aging society. There is a growing need for elderly products, and therefore the operation of web shops that sell elderly products is important. In an era which values performance management, searching for key performance indicators (KPIs) helps to reveal, if the goals of a web shop are achieved. In the current study, researchers adopted the constructs of the Balanced Scorecard (BSC) to evaluate web shop performance. Additionally, the Delphi method, along with questionnaires, was used to develop 29 indicators. Finally, the decision making trial and evaluation laboratory (DEMATEL) method assisted in identifying the level of importance of the constructs, in which "internal process" ranked top, followed by "learning and growth", "customer", and "financial". "Internal process" was the key construct that impacted other factors, while "customer" was an important construct affected by other factors. By understanding the influences and relationships among the constructs, enterprises can conduct additional monitoring and management to achieve functions of prevention, continuous improvement, and innovation in order to shape their core competence. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Stakeholder driven indicators for eHealth performance management.

Science.gov (United States)

Vedlūga, Tomas; Mikulskienė, Birutė

2017-08-01

The goal of the present article is to compile a corpus of indicators of eHealth development evaluation that would essentially reflect stakeholder approaches and complement technical indicators of assessment of an eHealth system. Consequently, the assessment of the development of an eHealth system would reflect stakeholder approaches and become an innovative solution in attempting to improve productivity of IT projects in the field of health care. The compiled minimum set of indicators will be designed to monitor implementation of the national eHealth information system. To ensure reliability of the quality research, the respondents were grouped in accordance to the geographical distribution and diversity of the levels and types of the represented jobs and institutions. The applied analysis implies several managerial insights on the hierarchy of eHealth indicators. These insights may be helpful in recommending priority activities in implementation of an eHealth data system on the national or international level. The research is practically useful as it is the first to deal with the topic in Lithuania and its theoretical and practical aspect are particularly relevant in implementation of an eHealth data system in Lithuania. The eHealth assessment indicators presented in the article may be practically useful in two aspects: (1) as key implementation guidelines facilitating the general course of eHealth system development and (2) as a means to evaluate eHealth outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Further Education Performance Indicators: A Motivational or a Performative Tool?

Science.gov (United States)

Boocock, Andrew

2013-01-01

Ethnographic research in a further education College (Borough College) between 2000 and 2005 assessed the impact of performance indicators (PIs) within a department teaching GCSEs and A-levels. Research focused on PIs integral to the Learning and Skills Council funding formula, the Common Inspection Framework and newspaper league tables, and the…

Fast beam condition monitor for CMS. Performance and upgrade

International Nuclear Information System (INIS)

Leonard, Jessica L.; Bell, Alan; Burtowy, Piotr

2014-05-01

The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.

Fast Beam Condition Monitor for CMS: performance and upgrade

CERN Document Server

INSPIRE-00009152; Bell, Alan; Burtowy, Piotr; Dabrowski, Anne; Hempel, Maria; Henschel, Hans; Lange, Wolfgang; Lohmann, Wolfgang; Odell, Nathaniel; Penno, Marek; Pollack, Brian; Przyborowski, Dominik; Ryjov, Vladimir; Stickland, David; Walsh, Roberval; Warzycha, Weronika; Zagozdzinska, Agnieszka

2014-11-21

The CMS beam and radiation monitoring subsystem BCM1F (Fast Beam Condition Monitor) consists of 8 individual diamond sensors situated around the beam pipe within the pixel detector volume, for the purpose of fast bunch-by-bunch monitoring of beam background and collision products. In addition, effort is ongoing to use BCM1F as an online luminosity monitor. BCM1F will be running whenever there is beam in LHC, and its data acquisition is independent from the data acquisition of the CMS detector, hence it delivers luminosity even when CMS is not taking data. A report is given on the performance of BCM1F during LHC run I, including results of the van der Meer scan and on-line luminosity monitoring done in 2012. In order to match the requirements due to higher luminosity and 25 ns bunch spacing, several changes to the system must be implemented during the upcoming shutdown, including upgraded electronics and precise gain monitoring. First results from Run II preparation are shown.

Performance indicators at Embalse NPP: PSA and safety system indicators based on PSA models

International Nuclear Information System (INIS)

Fornero, D.A.

2001-01-01

Several indicators have been implemented at Embalse NPP. The objective was selecting some representative parameters to evaluate the performance of both the plant and the personnel activities, important for safety. A first set of indicators was defined in accordance with plant technical staff criteria. A complementary set of them was addressed later based on WANO guidance. This report presents the set of indicators used at Embalse NPP, centering the description to related to safety systems performance indicators (SSPI). Some considerations are done about the calculation methods, the need for aligning and updating their values following Embalse Probabilistic Safety Assessment (PSA) development, and some pros and cons of using the PSA model for getting systems indicators. Owing to the fact that PSA ownership by utilities is also a subject of the meeting, some characteristics of the organization of the PSA Project are described at the beginning of the report. At Embalse NPP a Level 1 PSA has been developed under the responsibility of its own plant and with an important contribution from the IAEA. PSA was developed at the site, conducting this to a study strongly interactive with the station staff. (author)

Process performance indicators in project pre-design stage

NARCIS (Netherlands)

Haponava, T.; Al-Jibouri, Saad H.S.; Reymen, Isabelle; Scheublin, F.; Pronk, A.; Prins, M.; Emmitt, S.; den Otter, A

2006-01-01

Traditionally performance in construction is measured based on the "iron-triangle”- time, cost and quality. In recent years indicators have been developed to include the measurements of other aspects of project performance. The main shortcoming of these however is that most of them are lagging

A criteria and indicators monitoring framework for food forestry embedded in the principles of ecological restoration.

Science.gov (United States)

Park, Hyeone; Higgs, Eric

2018-02-02

Food forestry is a burgeoning practice in North America, representing a strong multifunctional approach that combines agriculture, forestry, and ecological restoration. The Galiano Conservancy Association (GCA), a community conservation, restoration, and educational organization on Galiano Island, British Columbia in Canada, recently has created two food forests on their protected forested lands: one with primarily non-native species and the other comprising native species. These projects, aimed at food production, education, and promotion of local food security and sustainability, are also intended to contribute to the overall ecological integrity of the landscape. Monitoring is essential for assessing how effectively a project is meeting its goal and thus informing its adaptive management. Yet, presently, there are no comprehensive monitoring frameworks for food forestry available. To fill this need, this study developed a generic Criteria and Indicators (C&I) monitoring framework for food forestry, embedded in ecological restoration principles, by employing qualitative content analysis of 61 literature resources and semi-structured interviews with 16 experts in the fields of food forestry and ecological restoration. The generic C&I framework comprises 14 criteria, 39 indicators, and 109 measures and is intended to guide a comprehensive and systematic assessment for food forest projects. The GCA adapted the generic C&I framework to develop a customized monitoring framework. The Galiano C&I monitoring framework has comprehensive suite of monitoring parameters, which are collectively address multiple values and goals.

Amalgamation of performance indicators to support NRC senior management reviews

International Nuclear Information System (INIS)

Wreathall, J.; Schurman, D.; Modarres, M.; Mosleh, A.; Anderson, N.; Reason, J.

1991-01-01

The purpose of this project is to develop a methodology for amalgamating performance indicators to provide an overall perspective on plant safety, as one input to Nuclear Regulatory Commission's (NRC) senior management reviews of plant safety. These reviews are used to adjust the level of oversight by NRC. Work completed to date includes the development of frameworks for relating indicator measures to safety, a classification scheme for performance indicators, and a mapping process to portray indicators in the frameworks

Indicators for monitoring of safety operation and condition of nuclear power stations

International Nuclear Information System (INIS)

Manova, D.

2001-01-01

A common goal of all employees in the nuclear power field is safety operation of nuclear power stations. The evaluation and control of NPP safety operation are a part of the elements of safety management. The present report is related only to a part of the total assessment and control of the plant safety operation, namely - the indicator system for monitoring of Kozloduy NPP operation and condition. (author)

The Qualitative Study of Key Performance Indicator on PT. Jiwasraya Manado

OpenAIRE

Rangian, Geby Melisa; Tumewu, Ferdinand

2014-01-01

Key Performance Indicator (KPI) is one of the most common tools used by the employees of companies to help manage more effectively and guide their progress. To perceive how far the achievement and the performance of the company, PT. Jiwasraya Manado use the Key Performance Indicator (KPI) to reveal the performance of the company. The objective of this study is to analyze the importance from the implementation of the key performance indicator for the insurance employee. There are several facts...

Monitoring and predicting cognitive state and performance via physiological correlates of neuronal signals.

Science.gov (United States)

Russo, Michael B; Stetz, Melba C; Thomas, Maria L

2005-07-01

Judgment, decision making, and situational awareness are higher-order mental abilities critically important to operational cognitive performance. Higher-order mental abilities rely on intact functioning of multiple brain regions, including the prefrontal, thalamus, and parietal areas. Real-time monitoring of individuals for cognitive performance capacity via an approach based on sampling multiple neurophysiologic signals and integrating those signals with performance prediction models potentially provides a method of supporting warfighters' and commanders' decision making and other operationally relevant mental processes and is consistent with the goals of augmented cognition. Cognitive neurophysiological assessments that directly measure brain function and subsequent cognition include positron emission tomography, functional magnetic resonance imaging, mass spectroscopy, near-infrared spectroscopy, magnetoencephalography, and electroencephalography (EEG); however, most direct measures are not practical to use in operational environments. More practical, albeit indirect measures that are generated by, but removed from the actual neural sources, are movement activity, oculometrics, heart rate, and voice stress signals. The goal of the papers in this section is to describe advances in selected direct and indirect cognitive neurophysiologic monitoring techniques as applied for the ultimate purpose of preventing operational performance failures. These papers present data acquired in a wide variety of environments, including laboratory, simulator, and clinical arenas. The papers discuss cognitive neurophysiologic measures such as digital signal processing wrist-mounted actigraphy; oculometrics including blinks, saccadic eye movements, pupillary movements, the pupil light reflex; and high-frequency EEG. These neurophysiological indices are related to cognitive performance as measured through standard test batteries and simulators with conditions including sleep loss

Conceptual framework for holistic dialysis management based on key performance indicators.

Science.gov (United States)

Liu, Hu-Chen; Itoh, Kenji

2013-10-01

This paper develops a theoretical framework of holistic hospital management based on performance indicators that can be applied to dialysis hospitals, clinics or departments in Japan. Selection of a key indicator set and its validity tests were performed primarily by a questionnaire survey to dialysis experts as well as their statements obtained through interviews. The expert questionnaire asked respondents to rate the degree of "usefulness" for each of 66 indicators on a three-point scale (19 responses collected). Applying the theoretical framework, we selected a minimum set of key performance indicators for dialysis management that can be used in the Japanese context. The indicator set comprised 27 indicators and items that will be collected through three surveys: patient satisfaction, employee satisfaction, and safety culture. The indicators were confirmed by expert judgment from viewpoints of face, content and construct validity as well as their usefulness. This paper established a theoretical framework of performance measurement for holistic dialysis management from primary healthcare stakeholders' perspectives. In this framework, performance indicators were largely divided into healthcare outcomes and performance shaping factors. Indicators of the former type may be applied for the detection of operational problems or weaknesses in a dialysis hospital, clinic or department, while latent causes of each problem can be more effectively addressed by the latter type of indicators in terms of process, structure and culture/climate within the organization. © 2013 The Authors. Therapeutic Apheresis and Dialysis © 2013 International Society for Apheresis.

Operational safety performance indicator system - a management tool for the self assessment of safety and reliability of nuclear power plants

International Nuclear Information System (INIS)

Anil Kumar; Mandowara, S.L.; Mittal, S.

2006-01-01

Operational Safety Performance Indicator system is one of the self assessment tools for station management to monitor safety and reliability of nuclear power plants. It provides information to station management about the performance of various areas of the plants by means of different colours of relevant performance indicators. Such systems have been implemented at many nuclear power plants in the world and have been considered as strength during WANO Peer Review. IAEA had a Coordinated Research Programme (CRP) on this with several countries participating including India. In NPCIL this system has been implemented in KAPS about a year back and found very useful in identifying areas which needs to be given more attention. Based on the KAPS feedback Implementation of this system has been taken up in RAPS-3 and 4 and KGS-l and 2. (author)

Performance of the upgraded NSLS beam position monitors

International Nuclear Information System (INIS)

Nawrocky, R.J.; Keane, J.

1997-01-01

The design and initial performance of the original NSLS beam position monitor were described by J. Bittner and R. Biscardi in 1989. The receiver, which processes signals from four button type pick-up electrodes by time-division multiplexing, operates at the third harmonic of the ring rf frequency (158.66 MHz). It has an output bandwidth of about 2 kHz and a dynamic signal range of approximately 36 dB. A total of 92 receivers have been installed in the NSLS X-ray and VUV storage rings for orbit monitoring and for real time feedback. As part of a continuous effort to improve the NSLS storage ring performance, the BPMs as well as other instrumentation systems have also been undergoing upgrades over the past two years to improve their performance. In the BPM, the front end has been modified to prevent saturation of the rf multiplexing switch, the detector operating point was changed to improve output signal linearity, the dynamic range was increased to over 60 dB, and the gain calibration was standardized to 0.5 volts/mm (i.e. 2 microm/mV). This paper describes the BPM modifications and presents some performance data and measurements on stored beam

Development of a monitoring instrument to assess the performance of the Swiss primary care system.

Science.gov (United States)

Ebert, Sonja T; Pittet, Valérie; Cornuz, Jacques; Senn, Nicolas

2017-11-29

The Swiss health system is customer-driven with fee-for-service paiement scheme and universal coverage. It is highly performing but expensive and health information systems are scarcely implemented. The Swiss Primary Care Active Monitoring (SPAM) program aims to develop an instrument able to describe the performance and effectiveness of the Swiss PC system. Based on a Literature review we developed a conceptual framework and selected indicators according to their ability to reflect the Swiss PC system. A two round modified RAND method with 24 inter-/national experts took place to select primary/secondary indicators (validity, clarity, agreement). A limited set of priority indicators was selected (importance, priority) in a third round. A conceptual framework covering three domains (structure, process, outcome) subdivided into twelve sections (funding, access, organisation/ workflow of resources, (Para-)Medical training, management of knowledge, clinical-/interpersonal care, health status, satisfaction of PC providers/ consumers, equity) was generated. 365 indicators were pre-selected and 335 were finally retained. 56 were kept as priority indicators.- Among the remaining, 199 were identified as primary and 80 as secondary indicators. All domains and sections are represented. The development of the SPAM program allowed the construction of a consensual instrument in a traditionally unregulated health system through a modified RAND method. The selected 56 priority indicators render the SPAM instrument a comprehensive tool supporting a better understanding of the Swiss PC system's performance and effectiveness as well as in identifying potential ways to improve quality of care. Further challenges will be to update indicators regularly and to assess validity and sensitivity-to-change over time.

Study on Environment Performance Evaluation and Regional Differences of Strictly-Environmental-Monitored Cities in China

Directory of Open Access Journals (Sweden)

Ji Guo

2017-12-01

Full Text Available With the rapid economic growth and development, the problem of environmental pollution in China’s cities is becoming increasingly serious, and environmental pollution takes on a regional difference. There is, however, little comprehensive evaluation on the environmental performance and the regional difference of strictly-environmental-monitored cities in China. In this paper, the environmental performance of 109 strictly-environmental-monitored cities in China is evaluated in terms of natural performance, management performance, and scale performance by Data Envelopment Analysis (DEA, incorporating PM2.5 and PM10 as undesirable outputs. The empirical results show that: (1 At present, the natural performance is quite high, while the management performance is noticeably low for most cities. (2 The gap between the level of economic development and environmental protection among cities in China is large, and the scale efficiency of big cities is better than that of smaller cities. The efficiency value of large-scale cities such as Beijing, Shanghai, Guangzhou, Shenzhen, etc. is high, equaling 1; the value of smaller cities such as Sanmenxia, Baoding, Mudanjiang, and Pingdingshan is low, close to 0, indicating that big cities are characterized by high environmental efficiency. (3 From the perspective of region, the level of environmental performance in China is very uneven. For example, the environmental efficiency level of the Pan-Pearl River Delta region is superior to that of the Pan-Yangtze River region and the Bahia Rim region, whose values of environmental efficiency are 0.858, 0.658, and 0.622 respectively. The average efficiency of the Southern Coastal Economic Zone, Eastern Coastal Comprehensive Economic Zone, and the Comprehensive Economic Zone in the middle reaches of the Yangtze River is higher than that of other regions. Finally, corresponding countermeasures and suggestions are put forward. The method used in this paper is applicable

Evolution of a residue laboratory network and the management tools for monitoring its performance.

Science.gov (United States)

Lins, E S; Conceição, E S; Mauricio, A De Q

2012-01-01

Since 2005 the National Residue & Contaminants Control Plan (NRCCP) in Brazil has been considerably enhanced, increasing the number of samples, substances and species monitored, and also the analytical detection capability. The Brazilian laboratory network was forced to improve its quality standards in order to comply with the NRCP's own evolution. Many aspects such as the limits of quantification (LOQs), the quality management systems within the laboratories and appropriate method validation are in continuous improvement, generating new scenarios and demands. Thus, efficient management mechanisms for monitoring network performance and its adherence to the established goals and guidelines are required. Performance indicators associated to computerised information systems arise as a powerful tool to monitor the laboratories' activity, making use of different parameters to describe this activity on a day-to-day basis. One of these parameters is related to turnaround times, and this factor is highly affected by the way each laboratory organises its management system, as well as the regulatory requirements. In this paper a global view is presented of the turnaround times related to the type of analysis, laboratory, number of samples per year, type of matrix, country region and period of the year, all these data being collected from a computerised system called SISRES. This information gives a solid background to management measures aiming at the improvement of the service offered by the laboratory network.

Performance of an rf beam monitor on the NBS-Los Alamos racetrack microtron