NRC performance indicator program

International Nuclear Information System (INIS)

Singh, R.N.

1987-01-01

The performance indicator development work of the US Nuclear Regulatory Commission (NRC) interoffice task group involved several major activities that included selection of candidate indicators for a trial program, data collection and review, validation of the trial indicators, display method development, interactions with the industry, and selection of an optimum set of indicators for the program. After evaluating 27 potential indicators against certain ideal attributes, the task group selected 17 for the trial program. The pertinent data for these indicators were then collected from 50 plants at 30 sites. The validation of the indicators consisted of two primary processes: logical validity and statistical analysis. The six indicators currently in the program are scrams, safety system actuations, significant events, safety system failures, forced outage rate, and equipment forced outages per 100 critical hours. A report containing data on the six performance indicators and some supplemental information is issued on a quarterly basis. The NRC staff is also working on refinements of existing indicators and development of additional indicators as directed by the commission

Survey and analysis of environmental performance indicators applied to thermoelectric generation styles; Levantamento e analise de indicadores de desempenho ambiental aplicados a empreendimentos termeletricos

Energy Technology Data Exchange (ETDEWEB)

Freitas, Bruno Moreno Rodrigo de; Cardoso Junior, Ricardo Abranches Felix [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2010-07-01

Country economic growth is proportional bond to it electric generation increasing capacity. Brazil, which has a power matrix predominantly renewable, currently is increasing generation, from thermoelectricity, due, mainly, to major facilities in relation to environmental licensing. Since this new Thermal Power Plants operating, tied to the generation with those ones already installed, will result in environmental impacts that must be properly controlled. Such control should follow the Environmental Performance Evaluation guidance, standardized by ABNT NBR ISO 14031/04. Therefore, the following work presents the main Environmental Performance Indicators applied to several thermoelectric generation styles (Oil, Natural Gas, Diesel, Mineral Coal, Biomass, Waste, Solar and Nuclear). (author)

Energy key performance indicators : a european benchmark and assessment of meaningful indicators for the use of energy in large corporations

OpenAIRE

Friedrichs, Katja

2013-01-01

This study aims to identify and analyze energy key performance indicators among large European companies. Energy usage has become a very meaningful topic for both internal management as well as external stakeholders of a company. A review of current literature suggests that while environmental indicators in general have found broad attention and plenty of theories concerning good and meaningful indicators are published, no study investigating actually applied energy indicators ...

Performance indicators of work activity.

Science.gov (United States)

Lahoz, Manoela de Assis; Camarotto, João Alberto

2012-01-01

The measurement of performance is a current topic in the management of people in companies, used as a parameter of effectiveness of processes and operations of production. The methods and models of the indicators of current use in the production have concentrated in the assessment of people's performance as determinative resource of the organizational success in the search for the competitiveness. Associated with the classic indicators of performance assessment of the production proceeding, other indicators are used in the assessment of risks and hazards, however with methods focused in the tasks, without connection with the real work activity. The present article explores literature on the models of performance measurement in use in companies and a field research to understand how companies interpret and use indicators that relate health and work, to direct future studies on the subject. Regarding the literature review, one can see that health indicators can be basically divided into two major groups: the legal and managerial indicators. When conducting case studies, it can be realized that companies do not have precisely the concept of health indicator, or were unable to define which of the indicators could be considered indicators of health, considering that absenteeism was the indicator mentioned by the four companies.

The Power of Performance Indices in the Global Politics of Anti-corruption

DEFF Research Database (Denmark)

Krause Hansen, Hans

2012-01-01

. Drawing on studies of organisation, surveillance and governmentality, this article examines the capacity of performance indices to construct comparable and governable subjects in international efforts to combat corruption. It conceptualises performance indices in terms of technologies of distance......While scholars have focused on the macro-structural, institutional and legal dimensions at work in international anti-corruption, they have paid little attention to role of the more specific technologies through which social forces become entangled in efforts at combating corruption internationally......, communication and surveillance and analyses a variety of corruption and anti-corruption indices, including corporate blacklisting as applied by the World Bank towards fraudulent corporations. It demonstrates how performance indices are implicated in the construction of standards and scripts for action against...

Risk-based performance indicators

International Nuclear Information System (INIS)

Azarm, M.A.; Boccio, J.L.; Vesely, W.E.; Lofgren, E.

1987-01-01

The purpose of risk-based indicators is to monitor plant safety. Safety is measured by monitoring the potential for core melt (core-melt frequency) and the public risk. Targets for these measures can be set consistent with NRC safety goals. In this process, the performance of safety systems, support systems, major components, and initiating events can be monitored using measures such as unavailability, failure or occurrence frequency. The changes in performance measures and their trends are determined from the time behavior of monitored measures by differentiation between stochastical and actual variations. Therefore, degradation, as well as improvement in the plant safety performance, can be determined. The development of risk-based performance indicators will also provide the means to trace a change in the safety measures to specific problem areas which are amenable to root cause analysis and inspection audits. In addition, systematic methods will be developed to identify specific improvement policies using the plant information system for the identified problem areas. The final product of the performance indicator project will be a methodology, and an integrated and validated set of software packages which, if properly interfaced with the logic model software of a plant, can monitor the plant performance as plant information is provided as input

Fishery Performance Indicators

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Performance indicators for landings, effort, revenue and distribution of revenue are collected for various fisheries nation-wide. The fisheries include catch and...

Facilities Performance Indicators Report, 2008-09

Science.gov (United States)

Hills, Christina, Ed.

2010-01-01

This paper features another expanded Web-based Facilities Performance Indicators Report (FPI). The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. The 2008-09 iteration of the Web-based Facilities Performance Indicators Survey was posted and…

Business process performance measurement: a structured literature review of indicators, measures and metrics.

Science.gov (United States)

Van Looy, Amy; Shafagatova, Aygun

2016-01-01

Measuring the performance of business processes has become a central issue in both academia and business, since organizations are challenged to achieve effective and efficient results. Applying performance measurement models to this purpose ensures alignment with a business strategy, which implies that the choice of performance indicators is organization-dependent. Nonetheless, such measurement models generally suffer from a lack of guidance regarding the performance indicators that exist and how they can be concretized in practice. To fill this gap, we conducted a structured literature review to find patterns or trends in the research on business process performance measurement. The study also documents an extended list of 140 process-related performance indicators in a systematic manner by further categorizing them into 11 performance perspectives in order to gain a holistic view. Managers and scholars can consult the provided list to choose the indicators that are of interest to them, considering each perspective. The structured literature review concludes with avenues for further research.

Performance indicators and indices of sludge management in urban wastewater treatment plants.

Science.gov (United States)

Silva, C; Saldanha Matos, J; Rosa, M J

2016-12-15

Sludge (or biosolids) management is highly complex and has a significant cost associated with the biosolids disposal, as well as with the energy and flocculant consumption in the sludge processing units. The sludge management performance indicators (PIs) and indices (PXs) are thus core measures of the performance assessment system developed for urban wastewater treatment plants (WWTPs). The key PIs proposed cover the sludge unit production and dry solids concentration (DS), disposal/beneficial use, quality compliance for agricultural use and costs, whereas the complementary PIs assess the plant reliability and the chemical reagents' use. A key PI was also developed for assessing the phosphorus reclamation, namely through the beneficial use of the biosolids and the reclaimed water in agriculture. The results of a field study with 17 Portuguese urban WWTPs in a 5-year period were used to derive the PI reference values which are neither inherent to the PI formulation nor literature-based. Clusters by sludge type (primary, activated, trickling filter and mixed sludge) and by digestion and dewatering processes were analysed and the reference values for sludge production and dry solids were proposed for two clusters: activated sludge or biofilter WWTPs with primary sedimentation, sludge anaerobic digestion and centrifuge dewatering; activated sludge WWTPs without primary sedimentation and anaerobic digestion and with centrifuge dewatering. The key PXs are computed for the DS after each processing unit and the complementary PXs for the energy consumption and the operating conditions DS-determining. The PX reference values are treatment specific and literature based. The PI and PX system was applied to a WWTP and the results demonstrate that it diagnosis the situation and indicates opportunities and measures for improving the WWTP performance in sludge management. Copyright © 2016 Elsevier Ltd. All rights reserved.

PERFORMANCE INDICATORS: A COMPARATIVE ANALYSIS BETWEEN PUBLIC AND PRIVATE COLLEGES IN BRAZIL

Directory of Open Access Journals (Sweden)

Átila de Melo Lira

2015-06-01

Full Text Available A comparative analysis between the use of performance indicators to public and private organizations have always been required to examine the scenario related to both. This study seeks to analyze the use of Balanced Scorecard (BSC to identify and understand the main differences and similarities in public and private higher education institutions (HEIs in Brazil in relation to the use of other organizations performance indicators. A quantitative and exploratory approach was adopted using institutional documents analysis. Data was searched on the websites of Brazilian higher education public and private organizations in order to accomplish this analysis comparative. The results showed that even reviewing few public institutions the use of performance indicators appears to be more efficient than those applied to the private ones. Private universities should observe and improve their processes and performance indicators based on those used in Brazilian public universities. This initial research still opens a horizon so that other studies be developed within this thought stream.

Competency Assessment Using Key Performance Indicators

OpenAIRE

Elena Alexandra Toader; Laura Brad

2015-01-01

The paper proposes a method for computing the scores of the key performance indicators resulted in the competency assessment process. The key performance indicators are estimated considering four performance levels that an IT professional can obtain at the end of the assessment process. We suggest as the best approach for estimating the performance key indicators an online questionnaire filled by 60 employees that work in IT Romanian companies. The results provide evidence that the difference...

Driver competence performance indicators using OTMR

Energy Technology Data Exchange (ETDEWEB)

Hassan EL Rashidy, R.A.

2016-07-01

The current practice for assessing driver competence performance is in-cab riding by driver managers. However, this paper investigates whether real-world driving data extracted from on-train monitoring recorders data (OTMR) can be used to assess the driver performance. A number of indicators were used to evaluate the drivers’ performance. These include: their use of the emergency bypass switch, the driver's reminder appliance as well as the driver’s reaction time. A study case illustrated the applicability of OTMR data to estimate the proposed indicators, which suggests that the indicators can be useful in the driver management system in addition to the current indicators. Furthermore, the proposed indicators could be used to tailor the driver training schemes up to their individual needs and evaluate their effectiveness. They could even be used for improving driver competence performance and reducing crash involvement by revealing potentially detrimental driving performance. (Author)

Indicators of safety culture - selection and utilization of leading safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

Reiman, Teemu; Pietikaeinen, Elina (VTT, Technical Research Centre of Finland (Finland))

2010-03-15

Safety indicators play a role in providing information on organizational performance, motivating people to work on safety and increasing organizational potential for safety. The aim of this report is to provide an overview on leading safety indicators in the domain of nuclear safety. The report explains the distinction between lead and lag indicators and proposes a framework of three types of safety performance indicators - feedback, monitor and drive indicators. Finally the report provides guidance for nuclear energy organizations for selecting and interpreting safety indicators. It proposes the use of safety culture as a leading safety performance indicator and offers an example list of potential indicators in all three categories. The report concludes that monitor and drive indicators are so called lead indicators. Drive indicators are chosen priority areas of organizational safety activity. They are based on the underlying safety model and potential safety activities and safety policy derived from it. Drive indicators influence control measures that manage the socio technical system; change, maintain, reinforce, or reduce something. Monitor indicators provide a view on the dynamics of the system in question; the activities taking place, abilities, skills and motivation of the personnel, routines and practices - the organizational potential for safety. They also monitor the efficacy of the control measures that are used to manage the socio technical system. Typically the safety performance indicators that are used are lagging (feedback) indicators that measure the outcomes of the socio technical system. Besides feedback indicators, organizations should also acknowledge the important role of monitor and drive indicators in managing safety. The selection and use of safety performance indicators is always based on an understanding (a model) of the socio technical system and safety. The safety model defines what risks are perceived. It is important that the safety

Indicators of safety culture - selection and utilization of leading safety performance indicators

International Nuclear Information System (INIS)

Reiman, Teemu; Pietikaeinen, Elina

2010-03-01

Safety indicators play a role in providing information on organizational performance, motivating people to work on safety and increasing organizational potential for safety. The aim of this report is to provide an overview on leading safety indicators in the domain of nuclear safety. The report explains the distinction between lead and lag indicators and proposes a framework of three types of safety performance indicators - feedback, monitor and drive indicators. Finally the report provides guidance for nuclear energy organizations for selecting and interpreting safety indicators. It proposes the use of safety culture as a leading safety performance indicator and offers an example list of potential indicators in all three categories. The report concludes that monitor and drive indicators are so called lead indicators. Drive indicators are chosen priority areas of organizational safety activity. They are based on the underlying safety model and potential safety activities and safety policy derived from it. Drive indicators influence control measures that manage the socio technical system; change, maintain, reinforce, or reduce something. Monitor indicators provide a view on the dynamics of the system in question; the activities taking place, abilities, skills and motivation of the personnel, routines and practices - the organizational potential for safety. They also monitor the efficacy of the control measures that are used to manage the socio technical system. Typically the safety performance indicators that are used are lagging (feedback) indicators that measure the outcomes of the socio technical system. Besides feedback indicators, organizations should also acknowledge the important role of monitor and drive indicators in managing safety. The selection and use of safety performance indicators is always based on an understanding (a model) of the socio technical system and safety. The safety model defines what risks are perceived. It is important that the safety

Indicators to monitor NPP operational safety performance

International Nuclear Information System (INIS)

Gomez-Cobo, Ana

2002-01-01

Since December 1995 the IAEA activities on safety performance indicators focused on the elaboration of a framework for the establishment of an operational safety performance indicator programme. The development of this framework began with the consideration of the concept of NPP operational safety performance and the identification of operational safety attributes. For each operational safety attribute, overall indicators, envisioned as providing an overall evaluation of relevant aspects of safety performance, were established. Associated with each overall indicator is a level of strategic indicators intended to provide a bridge from overall to specific indicators. Finally each strategic indicator was supported by a set of specific indicators, which represent quantifiable measures of performance. The programme development was enhanced by pilot plant studies, conducted over a 15 month period from January 1998 to March 1999. The result of all this work is compiled in the IAEA-TECDOC-1141, to be published shortly. This paper presents a summary of this IAEA TECDOC. It describes the operational safety performance indicator framework proposed and discusses the results of and lessons learned from the pilot studies. Despite the efforts described, it is clear that additional research is still necessary in areas such as plant-specific adaptation of proposed frameworks in order to suit individual data collection systems and plant characteristics, indicator selection, indicator definition, goal setting, action thresholds, analysis of trends, indicator display systems, analysis of overall safety performance (i.e., aggregation or combination of indicators), safety culture indicators, qualitative indicators, and use of additional indicators to address issues such as industrial safety attitude and performance, staff welfare, and environmental compliance. This is the rationale for a new IAEA Coordinated Research Project on 'Development and application of indicators to monitor NPP

Performance indicators for roadway bridges

OpenAIRE

Strauss, A.; Vidovic, A.; Zambon, I.; Dengg, F.; Tanasic, N.; Matos, José C.

2016-01-01

Publicado em "Maintenance, monitoring, safety, risk and resilience of bridges and bridge networks". ISBN 978-1-138-02851-7 The performance indicators should, by its definition, allow capturing the life-cycle degradation processes affecting maintenance plans or the remaining lifetime. The qualitative or quantitative performance indicators are obtained through visual inspections, non-destructive tests or monitoring systems. After their quantification and the comparison with the resp...

The Consistency of Performance Management System Based on Attributes of the Performance Indicator: An Empirical Study

Directory of Open Access Journals (Sweden)

Jan Zavadsky

2014-07-01

business practice. If companies applied the homogenous set of attributes of performance indicator it would increase the effectiveness of the PMS. Effectiveness can be increased by faster response to non-conformity or performance gap. Our proposal targets the perception of the PMS as a management metasystem independently of the industry, size of enterprises or products. We also suggest a minimum set of attributes of performance indicator toward a consistent PMS.

CHALLENGES WHEN DEVELOPING PERFORMANCE INDICATORS

Directory of Open Access Journals (Sweden)

Brindusa Maria POPA

2015-04-01

Full Text Available Abstract Developing key performance indicators (KPIs represents one step closer to the achievement of objectives and strategic vision of the organization. They are important elements of the pathway towards performance, they evaluate and indicate the level of progress, guide the organizational strategy, they can be considered even the qualitative or quantitative expression of the execution of the strategy. Building reliable and appropriate measurement systems is one of the most difficult stage in the performance evaluation process. Such systems of management will help the executives and the management teams identify and build upon the elements that create competitive advantage and opportunities for better results.

Material management performance indicators for upper management

International Nuclear Information System (INIS)

O'Loughlin, R.C.

1987-01-01

The purpose of this paper is to develop a case for the use of performance indicators by upper management to monitor the effectiveness of material management operations at nuclear power plants. The paper establishes that the use of performance indicators is not a pro forma matter. There are specific standards and conditions to which the material management operation must conform for the performance measures to be meaningful. The paper concludes with discussion of the application and use of specific performance indicators. Proper use of selected performance indicators can remove the mystery and uncertainty for management about an aspect of nuclear plant operations that has significant budget implications

Development and integration of programmatic performance indicators

International Nuclear Information System (INIS)

Modarres, M.; Wrethall, J.; Appignani, P.L.

1989-01-01

This paper describes the results of an evaluation of maintenance-related programmatic performance indicators, and summarizes the direction being taken in a new project to integrate indirect performance indicators for nuclear power plants. Programmatic indicators allow NRC to monitor, at a distance, trends in functional activities before a significant impact appears on safety. Previously presented work described the selection of candidate performance indicators associated with maintenance for continued analysis. This evaluation focused on two aspects of the selected indicators: (1) an evaluation of the state of maintenance programs in the narrative text of SALP reports versus the frequencies of inadvertent ESF actuations from test and maintenance errors; and (2) an evaluation of alternative methods for analyzing the thermal performance of plants as an integral indicator of maintenance program effectiveness. 1 ref., 1 fig

Establishing Key Performance Indicators : Case company X

OpenAIRE

Singh, Jatinder

2015-01-01

The key performance indicators serve as the navigational tools for a business organization to monitor its performance. They enable the management team to take real time decisions to keep organization’s resources aligned to its business strategy to accomplish its strategic objec-tives. This research was conducted to analyse the process of establishing successful key per-formance indicators for a business organization. The research was conducted to recommend key performance indicators developme...

How reliable are geometry-based building indices as thermal performance indicators?

International Nuclear Information System (INIS)

Rodrigues, Eugénio; Amaral, Ana Rita; Gaspar, Adélio Rodrigues; Gomes, Álvaro

2015-01-01

Highlights: • Geometry-based building indices are tested in different European climate regions. • Building design programs are used to randomly generate sets of simulation models. • Some indices correlate in specific climates and design programs. • Shape-based Relative Compactness presented the best correlation of all indices. • Window-to-Surface Ratio was the window-based index with best correlation. - Abstract: Architects and urban planners have been relying on geometry-based indices to design more energy efficient buildings for years. The advantage of such indices is their ease of use and capability to capture the relation of a few geometric variables with the building’s performance. However, such relation is usually found using only a few simple building models and considering only a few climate regions. This paper presents the analysis of six geometry-based building indices to determine their adequacy in eight different climate regions in Europe. For each location, three residential building design programs were used as building specifications. Two algorithms were employed to randomly generate and assess the thermal performance of three sets of 500 alternative building models. The results show that geometry-based indices only correlate with the buildings’ thermal performance according to specific climate regions and building design programs

Profit indicators in performance systems in the Czech companies

Directory of Open Access Journals (Sweden)

Jana Hornungová

2013-01-01

Full Text Available The main focus of the paper is the corporate performance measurement. At present, it is necessary to monitor this corporate performance and mostly try to improve it, because it could be very crucial competitive advantage in the market. The article provides an overview of key performance indicators (KPIs in the companies. Based on the theoretical data there are applied statistical methods, which should be achieved of main aim of the paper. The main aim of the paper is to describe which groups of Key Performance Indicators are connected with corporate performance system of measurement in the area of Information and Communication Activities. To support this approach theoretical information from the area of Key Performance Indicators connected with data from primary research were used, focused on the performance evaluation of enterprises.Successful companies are aware of the need for long-term strategic development, which is based on teamwork, respect of external environment and all subjects, which influence the business activities of the company directly or indirectly. It can be more effective to conceptualize relationship complete than limit to only consumer market and customer relations. Marketing moves more and more away from individual transaction orientation and rather focus on value creating relations, where the objective is to provide long- term stakeholder value. Day after day the company gets in touch with different groups of stakeholders, that influence the corporate development and it can not to access to these interest groups individually for reason of corporate limits. It is therefore necessary to define homogenous stakeholders groups, which are differ from each other in terms of their impact on business management. The authors of article put the question, which classification is the most statistical explaining the difference of stakeholders in term of evaluation their impact on business management. It was made cluster analysis for

Measuring individual work performance: identifying and selecting indicators.

Science.gov (United States)

Koopmans, Linda; Bernaards, Claire M; Hildebrandt, Vincent H; de Vet, Henrica C W; van der Beek, Allard J

2014-01-01

Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. This study was designed to (1) identify indicators for each dimension, (2) select the most relevant indicators, and (3) determine the relative weight of each dimension in ratings of work performance. IWP indicators were identified from multiple research disciplines, via literature, existing questionnaires, and expert interviews. Subsequently, experts selected the most relevant indicators per dimension and scored the relative weight of each dimension in ratings of IWP. In total, 128 unique indicators were identified. Twenty-three of these indicators were selected by experts as most relevant for measuring IWP. Task performance determined 36% of the work performance rating, while the other three dimensions respectively determined 22%, 20% and 21% of the rating. Notable consensus was found on relevant indicators of IWP, reducing the number from 128 to 23 relevant indicators. This provides an important step towards the development of a standardized, generic and short measurement instrument for assessing IWP.

Key Sustainability Performance Indicator Analysis for Czech Breweries

Directory of Open Access Journals (Sweden)

Edward Kasem

2015-01-01

Full Text Available Sustainability performance can be said to be an ability of an organization to remain productive over time and hold on to its potential for maintaining long-term profitability. Since the brewery sector is one of the most important and leading markets in the foodstuff industry of the Czech Republic, this study depicts the Czech breweries’ formal entry into sustainability reporting and performance. The purpose of this paper is to provide an efficiency level evaluation which would represent the level of corporate performance of Czech breweries. For this reason, Data Envelopment Analysis (DEA is introduced. In order to apply it, we utilize a set of key performance indicators (KPIs based on two international standard frameworks: the Global Reporting Initiative (GRI and its GRI 4 guidelines, and the guideline KPIs for ESG 3.0, which was published by the DVFA Society. Four sustainability dimensions (economic, environmental, social and governance are covered, making it thus possible to adequately evaluate sustainability performance in Czech breweries. The main output is not only the efficiency score of the company but also the input weights. These weights are used to determine the contribution of particular criteria to the breweries’ achieved score. According to the achieved efficiency results for Czech breweries, the percentage of women supervising the company does not affect the sustainability performance.

Development of safety performance indicators for HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Ahn, Guk-Hoon; Lee, Kye-Hong; Lim, In-Cheol

2007-01-01

The nuclear facilities need an extensive basis for ensuring their safety. An operating organization should conduct its operation and utilization important to the safety in accordance with approved procedures and regulations. The general aims of a management system for nuclear facilities are to improve the safety performance through a planning, control and supervision of safety related activities and to foster a strong safety culture. The effectiveness of a management system can be monitored and measured to confirm the ability of its processes to achieve the intended safety performance by an assessment of the operational performance. The Operational Safety Performance Indicators, also known as SPI, help an organization define and measure a progress with regard to safety activity goals. The elements of a SPI are quantifiable measurements that reflect the critical success factors of an organizational safety. Since 1995, efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator program in nuclear power plants (NPP). IAEA-TECDOC-1141, 'Operational safety performance indicators for NPP' attempted to provide a frame work for an identification of performance indicators which have a relationship to the desired safety attributes, and therefore, to a safe plant operation. Three key attributes of a smooth operation, an operation with a low risk, and an operation with a positive safety attitude, were recommended, which are associated with a safe operation. Because these attributes cannot be directly measured, an indicator structure is expanded further until a level of easily quantifiable or directly measurable indicators is identified. The intention of this approach is to use quantitative information provided by the specific indicators and to analyze performance trends relative to established goals. The safety activities in HANARO have been continuously conducted to enhance its safe operation. HANARO

Key Performance Indicators for Primary Schools.

Science.gov (United States)

Strand, Steve

Focusing mostly on their application for primary schools, this document describes the educational key performance indicators (KPI) employed by the Wendsworth, England, Local Educational Authority (LEA). Indicators are divided into 3 areas, educational context, resource development, and outcomes. Contextual indicators include pupil mobility, home…

Key Performance Indicators Disclosures Through Internet: towards an integrated scoreboard

Directory of Open Access Journals (Sweden)

Ilídio Tomás Lopes

2014-10-01

Full Text Available Purpose – Information disclosure is driven by multiple determinants, most of them supported by traditional theories, such as agency theory, contingency theory, and legitemacy theory. This research aims to identify a set of Key Performance Indicators (KPI, disclosed to stakeholders through Internet. It also aims to apply for an integrated performance scorebord, acting it as a dynamic comparative tool, in particular for listed companies which market value is driven by investors expectations and needs.Design/methodology/approach – Based on 47 listed companies from the Portuguese Stock Index regulated market, and through an interpretive content analysis, research was driven towards the identification of KPI that were explicitly reported to stakeholders through structured or unstructured frameworks. This qualitative approach supports the evidences about performance indicators reported by listed companies to stakeholders, in particular to potential stockholders.Findings – Companies disclose a wide variety of key performance indicators, however in most cases included in their periodical management reports. Only a low number of companies disclose those indicators through a visible form in their web sites. Furthermore, KPI disclosed have a generic nature and are usually complemented by theoretical explanations about their evolution and trends. The diversity of indicators disclosed does not permit a comparision between companies and activity sectors. Key performence indicators are still disclosed on a voluntarily basis, remaining, in this scope, multiple agency conflicts and other issues around agency costs. Altough the intensity and categorization in the information disclosure, a standard framework is required in orther to ensure a dynamic comparision between companies or sectors.   Research limitations – The scope of this research is the Portuguese regulated market. Further research can introduce in the sample companies listed in other

CREDIT Performance Indicator Framework

DEFF Research Database (Denmark)

Frandsen, Anne Kathrine; Bertelsen, Niels Haldor; Haugbølle, Kim

2010-01-01

During the past two years the Nordic Baltic research project CREDIT (Construction and Real Estate – Developing Indicators for Transparency) has worked with the aim to improve transparency of value creation in building and real estate. One of the central deliverables of the CREDIT project was a fr......During the past two years the Nordic Baltic research project CREDIT (Construction and Real Estate – Developing Indicators for Transparency) has worked with the aim to improve transparency of value creation in building and real estate. One of the central deliverables of the CREDIT project...... was a framework of indicators relevant in building and real estate and applicable in the Nordic and Baltic countries as well as a proposal for a set of key indicators. The study resulting in CREDIT Performance Indicator Framework has been based on 28 case studies of evaluation practises in the building and real...... estate sector each addressing three interlinked levels: building/ projects level, company or enterprise level and benchmarking system level. Additionally it has been based on dialogue with researchers and professional organisation, international research and standardisation work and national building...

Sustainable Transport and Performance Indicators

DEFF Research Database (Denmark)

Gudmundsson, Henrik

2004-01-01

Sustainable transport has become a major policy concern in recent years. The term suggests a need to consider transport in a comprehensive perspective including the well-being of both present and future generations, and taking environmental, social and economic issues into account. Indicators...... in forecasting and tracking the performance of transport systems increasingly guide sustainable transport policy making. This review explores the implications of the sustainable transport” concept and how it can be made operational with indicators. A number of indicator systems are reviewed, and some strengths...

Development of radiological performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Lee, B.S.; Jung, K.H.; Lee, S.H.; Jang, S.Y.

2000-01-01

The purpose of this work was to improve the regulatory approach to check the licensee's compliance with regulation regarding radiation protection in operating nuclear power plants (NPPs). The current domestic inspection program for NPPs requires inspectors to conduct compliance-inspection for the systems/equipment and the procedures of NPPs. In this work, we have developed a set of draft radiological performance indicators (PIs) to assess radiation safety in NPPs. The development of PIs was based on the concept that the licensees' implementation of the radiation protection program in NPPs should be able to achieve the goal of radiation protection which the International Commission on Radiological Protection (ICRP) has recommended as ICRP 60 (1991). We selected and/or developed the radiological performance indicators considering the radiation exposure network (source-environment-receptor) for NPPs. The PIs intend to be applied only to normal exposure due to normal operations including transient operational conditions, but not to potential exposure due to accidents. Also, we have chosen the receptor as workers who are occupationally exposed to radiation as well as the members of public who are exposed to radiation from radioactive effluents. The PIs intend to track the past performance rather than to expect the future performance. Finally, the individual PIs do not verify the root cause of the trend of performance; however, they provide the basis for deciding whether the procedures and work management have been properly implemented. Currently a set of 21 draft PIs has been developed for the exposure network in NPPs. For the receptor, the PIs are divided into worker individual dose, worker collective dose and public individual dose. For the environment, the PIs are related to the dose rates of controlled areas, radioactive material concentrations in controlled areas, radioactive contamination in controlled areas and at exit points, and radioactive effluent

School infrastructure performance indicator system (SIPIS)

CSIR Research Space (South Africa)

Gibberd, Jeremy T

2007-05-01

Full Text Available This paper describes the School Infrastructure Performance Indicator System (SIPIS) project which explores how an indicator system could be developed for school infrastructure in South Africa. It outlines the key challenges faced by the system...

Performance Indicators of Operating Reactors

Data.gov (United States)

Nuclear Regulatory Commission — A list of Performance Indicators (PI) that are reported to the NRC by licensees at the end of each quarter in accordance with Inspection Manual Chapters (IMC) 0608,...

Corporate performance indicators: The case of universities

Directory of Open Access Journals (Sweden)

Bakae Aubrey Mokoena

2016-11-01

Full Text Available This paper re-examines the long-standing and unresolved debate regarding the use of performance indicators in higher education. This paper aims to identify the primary variables that comprise university performance from the perspectives of academics within universities of technology in South Africa. A structured questionnaire was administered to a conveniently selected sample of 507 academics recruited from five universities of technology in South Africa. Using the exploratory factor analysis technique, five indicators were used as sub-dimensions to measure university performance were identified. These were 1 recognition, 2 image, 3 collaboration, 4 spin-off, 5 employability and 6 research. Overall, the research results suggests that these five performance indicators can assist South Africa’s universities of technology to achieve a higher level of institutional performance. The boards responsible for running universities of technology should consider which strategic management approaches they are currently utilising and streamline them to cement their competitive advantage and superior performance.

Sustainable Transport and Performance Indicators

DEFF Research Database (Denmark)

Gudmundsson, H.

2004-01-01

ustainable transport has become a major policy concern in recent years. The term suggests a need to consider transport in a comprehensive perspective including the well-being of both present and future generations, and taking environmental, social and economic issues into account. Indicators...... in forecasting and tracking the performance of transport systems increasingly guide sustainable transport policy making. This review explores the implications of the "sustainable transport" concept and how it can be made operational with indicators. A number of indicator systems are reviewed, and some strengths...... and weaknesses are highlighted with regard to the support they provide for sustainable transport development....

Selection and Use of Performance Indicators in Decommissioning

International Nuclear Information System (INIS)

2011-01-01

The success of completing a decommissioning project on schedule and budget is determined by the ability to define a clear endpoint (outcome), to accurately determine intermediate progress, and develop reliable forecasts to complete remaining tasks. Performance indicators are used to examine those aspects that are crucial to this success. This information is required by and periodically reported to various stakeholders. Although the practice of nuclear decommissioning is maturing, it would benefit from optimal use of performance indicators. Performance measurement is the 'heart and soul' of the performance based management process. Flowing from the organizational mission and the strategic planning process, it provides the data that will be collected, analysed, reported and ultimately, used to make sound business decisions. It directs the business function by documenting progress towards established objectives, identifying areas of both strength and weakness, and justifying budgetary expenditures. In this report, practical advice is provided on the effective use of performance indicators to measure and report on the achievement of the goals and plans of a nuclear decommissioning project. The structure of the report takes the reader progressively through all aspects of designing, selecting and using performance indicators. A process for setting up a performance indicator system against basic principles is presented, including a discussion of each step in the process. The report also provides an expanded discussion of the most important influences on the identification and selection of performance indicators. Finally, practical guidance on the use of performance indicators in specific Member States is provided together with field experience.

Performance indicator system with application to NPP management

International Nuclear Information System (INIS)

Gomez, J.; Roldan, J.

2001-01-01

The objective of the paper is to present the work that is being conducted in the scope of a research project between Cofrentes NPP and the polytechnic university of Valencia aimed to the development and implementation of a performance indicators system to support plant management. In developing this system, attention is being paid to the areas of safety, production and dependability. The first step in the project was the development of the performance indicator system (PIS), in order to help in assessing the effectiveness of the different activities in plant (i.e. maintenance, inspections, tests, etc.). It is suggested establishing the operational indicators set in 3 levels. The lowest level concerns indicators monitoring performance and maintenance characteristics of components. The next one involves a subset of indicators placed at system level with a similar goal. And finally, the highest level summarizes the impact of the global policy in the whole plant from safety and performance point of view. The definition of an indicator should comprise, at least, the following items: indicator's name, performance area, definition and data needed. A strategy should define what, when and how indicators have to be evaluated, analyzed and reported. This article gives an example application of the methodology at the Cofrentes NPP, collective dose as safety indicator, power production as production indicator and the number of work orders as maintenance indicator are considered and their time evolution is given. (A.C.)

Applying the balanced scorecard to local public health performance measurement: deliberations and decisions

Directory of Open Access Journals (Sweden)

Kurji Karim

2009-05-01

Full Text Available Abstract Background All aspects of the heath care sector are being asked to account for their performance. This poses unique challenges for local public health units with their traditional focus on population health and their emphasis on disease prevention, health promotion and protection. Reliance on measures of health status provides an imprecise and partial picture of the performance of a health unit. In 2004 the provincial Institute for Clinical Evaluative Sciences based in Ontario, Canada introduced a public-health specific balanced scorecard framework. We present the conceptual deliberations and decisions undertaken by a health unit while adopting the framework. Discussion Posing, pondering and answering key questions assisted in applying the framework and developing indicators. Questions such as: Who should be involved in developing performance indicators? What level of performance should be measured? Who is the primary intended audience? Where and how do we begin? What types of indicators should populate the health status and determinants quadrant? What types of indicators should populate the resources and services quadrant? What type of indicators should populate the community engagement quadrant? What types of indicators should populate the integration and responsiveness quadrants? Should we try to link the quadrants? What comparators do we use? How do we move from a baseline report card to a continuous quality improvement management tool? Summary An inclusive, participatory process was chosen for defining and creating indicators to populate the four quadrants. Examples of indicators that populate the four quadrants of the scorecard are presented and key decisions are highlighted that facilitated the process.

Applying the balanced scorecard to local public health performance measurement: deliberations and decisions.

Science.gov (United States)

Weir, Erica; d'Entremont, Nadine; Stalker, Shelley; Kurji, Karim; Robinson, Victoria

2009-05-08

All aspects of the heath care sector are being asked to account for their performance. This poses unique challenges for local public health units with their traditional focus on population health and their emphasis on disease prevention, health promotion and protection. Reliance on measures of health status provides an imprecise and partial picture of the performance of a health unit. In 2004 the provincial Institute for Clinical Evaluative Sciences based in Ontario, Canada introduced a public-health specific balanced scorecard framework. We present the conceptual deliberations and decisions undertaken by a health unit while adopting the framework. Posing, pondering and answering key questions assisted in applying the framework and developing indicators. Questions such as: Who should be involved in developing performance indicators? What level of performance should be measured? Who is the primary intended audience? Where and how do we begin? What types of indicators should populate the health status and determinants quadrant? What types of indicators should populate the resources and services quadrant? What type of indicators should populate the community engagement quadrant? What types of indicators should populate the integration and responsiveness quadrants? Should we try to link the quadrants? What comparators do we use? How do we move from a baseline report card to a continuous quality improvement management tool? An inclusive, participatory process was chosen for defining and creating indicators to populate the four quadrants. Examples of indicators that populate the four quadrants of the scorecard are presented and key decisions are highlighted that facilitated the process.

Technical indicators of financial performance in the dairy herd

DEFF Research Database (Denmark)

Kristensen, Erling Lundager; Østergaard, Søren; Krogh, Mogens Agerbo

2008-01-01

Monte Carlo simulation was used to predict the long-term financial performance related to the technical performance of dairy herds. The indicators addressed were derived from data collected routinely in the herd. They indicated technical performance that can be affected by the farmer...... or the consultant, and they were derived from expected cause-effect relations between technical performance and financial performance at the herd level. The study included the indicators shape of lactation curve, reproduction efficiency, heifer management, variation between cows in lactation curve persistency...... cow was analyzed as the measure of financial performance. The potential effects of the selected indicators on the gross margin were estimated by means of an ANOVA. The final model allowed estimation of the financial value of specific changes within the key performance indicators. This study indicated...

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Social Performance vs. Financial Performance: CSR Disclosures as an indicator of social performance

Directory of Open Access Journals (Sweden)

İlker Yılmaz

2013-04-01

Full Text Available In recent decades, it is gaining more and more dominance in both academic and business life that the company exists for and has responsibilities toward a wider group of stakeholders and it must have some objectives other than profitability. To achieve sustainable development and growth, the companies must assume more duties, which is called the term “corporate social responsibility (CSR.” In the literature, it is questioned whether CSR activities benefit the company or not; whether there is any relationship exists between CSR activities and the company’s financial performance and the direction of the relationship. We aimed to explore that whether there is any effect corporate social performance (CSP on financial performance and position and vice versa. We performed content analysis through annual reports and derived a social score composed of the items included in disclosure guidelines and some criteria used in CSR ratings. We also used several financial position and financial performance indicators. In order to explore the relationship between CSP and financial indicators, we run panel data regressions. We found significant results for some of the indicators, where some of the indicators gave insignificant results. The reporting of CSR activities is in very low levels. The conscious toward CSR and sustainability must be promoted and the companies must assume more active roles. The reporting of those activities is also important.

Interpretive Structural Model of Key Performance Indicators for Sustainable Maintenance Evaluatian in Rubber Industry

Science.gov (United States)

Amrina, E.; Yulianto, A.

2018-03-01

Sustainable maintenance is a new challenge for manufacturing companies to realize sustainable development. In this paper, an interpretive structural model is developed to evaluate sustainable maintenance in the rubber industry. The initial key performance indicators (KPIs) is identified and derived from literature and then validated by academic and industry experts. As a result, three factors of economic, social, and environmental dividing into a total of thirteen indicators are proposed as the KPIs for sustainable maintenance evaluation in rubber industry. Interpretive structural modeling (ISM) methodology is applied to develop a network structure model of the KPIs consisting of three levels. The results show the economic factor is regarded as the basic factor, the social factor as the intermediate factor, while the environmental factor indicated to be the leading factor. Two indicators of social factor i.e. labor relationship, and training and education have both high driver and dependence power, thus categorized as the unstable indicators which need further attention. All the indicators of environmental factor and one indicator of social factor are indicated as the most influencing indicator. The interpretive structural model hoped can aid the rubber companies in evaluating sustainable maintenance performance.

Dashboard and Firms Performance Optimization Using Piloting Indicators

Directory of Open Access Journals (Sweden)

Sorinel Capusneanu

2006-07-01

Full Text Available Can we analyze the enterprise performances upon the pilot indicators? The answer is completed by analyzing and interpreting the suggested indicators. Finally, these indicators will form the enterprise dashboard, which the management will take the right decisions. The dashboard represents the selection and presentation way of pilot indicators which permit tendencies visualization leaving from enterprise’s followed objectives. Through analyses and interpretation of pilot indicators, it is generating actions which contribute to enterprise’s improvement performances.

Safety performance indicators. Topical issues paper no. 5

International Nuclear Information System (INIS)

Dahlgren, K.; Lederman, L.; Szikszai, T.; Palomo, J.

2001-01-01

Since its creation the nuclear industry has been struggling with the question of how safe is safe enough. Safety is a common goal to all involved in the design, operation and regulation of a nuclear installation. As a concept safety is not easy to define. However, there is a general understanding of what attributes a nuclear power plant should have in order to operate safely. The challenge lies in measuring the attributes. The new competitive open electricity market, in many countries throughout the world, is increasing the economic pressure on operators to lower operating costs without jeopardizing safety. Challenges are occurring at a rate that is unprecedented in the nuclear industry: competitiveness; downsizing; ageing; policy changes; reorganization; restructuring; mergers; globalization; and takeovers demand increasing attention to the management of safety. There are various means to measure safety performance, some of which are more qualitative in nature and others which through quantitative measures provide the means by which to evaluate performance trends with clear ties to safety. According to their use, indicators are generally considered in two groups: leading or proactive and lagging or reactive indicators. Leading indicators are most useful as a precursor to safety degradation for early management reaction. Lagging indicators are most commonly used to drive plant performance, to monitor and for benchmarking against similar plants. The actual values of the indicators are not intended to be direct measures of safety, although safety performance can be inferred from the results achieved. Each plant needs to determine which indicators best serve its needs. Selected indicators should not be static, but should be adapted to the conditions and performance of the plant, considering the cost-benefit of maintaining each individual indicator. It should be recognized that while indicators provide valuable information in the effective management of plant safety

New Key Performance Indicators for a Smart Sustainable City

Directory of Open Access Journals (Sweden)

Minako Hara

2016-03-01

Full Text Available We propose key performance indicators (KPIs based on the Gross Social Feel-Good Index to evaluate a smart sustainable city and report the results of a field trial in a city located almost at the center of the Tokyo Metropolitan Area. We developed KPIs based on the following concepts: (1. The triple bottom line is the basic evaluation criteria; (2. The same unit is used for every evaluation criterion; (3. The KPIs can be used to assess a diverse range of smart sustainable cities with different goals. With the proposed KPIs of smart sustainable cities, indicators are divided into four layers for simplicity: the triple bottom line and “satisfaction” lie in the first layer. Since the notion of “society” is broad, it is further split into “safety”, “health”, and “comfort”, which are positioned in the second layer. The third layer includes indicators such as “information security” and “ubiquitous society” from the perspective of information communication technology (ICT. We conducted a trial evaluation by applying the proposed KPIs to individual ICT solutions of “Internet Protocol announcements”, “Wi-Fi around the station” and “information transmission and control” which have already been installed in a smart sustainable city.

Retrospective Analysis of Indication of Bone Scintigraphy Performed in Our Clinic

Directory of Open Access Journals (Sweden)

Fusun Aydogan

2014-03-01

Full Text Available Aim: Bone scintigraphy is one of the commonly used radionuclide imaging and it is successfully used in the diagnosis and follow-up of many diseases. The aim of this study is to determine the indications and filming protocols of bone scintigraphy which was performed in our clinic. Material and Method: Two hundred and fifty two patients (132 male, 120 female who was performed bone scintigprapy in our clinic between December 2011 and June 2013 included the study. Mean age was 50.1±20.2 years. Scintigraphic protocols were made in two ways as late static whole body imaging and three-phase bone scintigraphy according to the type of the diseases. Indications of scintigraphies and scintigraphic protocols were detected. Results: Bone scintigraphy was performed for diagnosis and monitoring of metastatic bone disease to 102 patients (40,5 %, for orthopedic applications to 57 patients (22,6 %, for diagnosis and monitoring of primary bone tumors to 29 patients (11,5 %, for diagnosis of osteomyelitis to 17 patients (6,7 %, for differential diagnosis of infection and loosening of the prosthesis to 12 patients (4,8 %, investigate the viability of the graft in 14 patients (4,6 %, for rheumatologic diseases to 9 patients (3,6 %, for investigate the pathological vertebral fractures and osteoporosis to 4 patients (1,6 %, for diagnosis the metabolic bone disease to 2 patients (0,8 %, for diagnosis of otitis externa to 5 patients (1,98 % and for for suspicion of malignancy to 1 patient (0,4 %. Late static whole body imaging protocol was applied to 136 patients (54 % and three-phase imaging protocol was applied to 116 patients (46 %. Discussion: The most common use of bone scintigraphy is the diagnosis and follow-up of metastatic bone disease. It is followed by reasons such as orthopedic applications, monitoring and diagnosis of primary bone tumors and diagnosis of osteomyelitis.

Improving the performance of high-energy physics analysis through bitmap indices

CERN Document Server

Stockinger, K; Hoschek, W; Schikuta, E

2000-01-01

Bitmap indices are popular multi-dimensional data structures for accessing read-mostly data such as data warehouse (DW) applications, decision support systems (DSS) and online analytical processing (OLAP). One of their main strengths is that they provide good performance characteristics for complex adhoc queries and an efficient combination of multiple index dimensions in one query. Considerable research work has been done in the area of finite (and low) attribute cardinalities. However, additional complexity is imposed on the design of bitmap indices for high cardinality or even non-discrete attributes, where different optimisation techniques than the ones proposed so far have to be applied. We discuss the design and implementation of bitmap indices for high-energy physics (HEP) analysis, where the potential search space consists of hundreds of independent dimensions. A single HEP query typically covers 10 to 100 dimensions out of the whole search space. In this context we evaluated two different bitmap enco...

Water-food-energy nexus index: analysis of water-energy-food nexus of crop's production system applying the indicators approach

Science.gov (United States)

El-Gafy, Inas

2017-10-01

Analysis the water-food-energy nexus is the first step to assess the decision maker in developing and evaluating national strategies that take into account the nexus. The main objective of the current research is providing a method for the decision makers to analysis the water-food-energy nexus of the crop production system at the national level and carrying out a quantitative assessment of it. Through the proposed method, indicators considering the water and energy consumption, mass productivity, and economic productivity were suggested. Based on these indicators a water-food-energy nexus index (WFENI) was performed. The study showed that the calculated WFENI of the Egyptian summer crops have scores that range from 0.21 to 0.79. Comparing to onion (the highest scoring WFENI,i.e., the best score), rice has the lowest WFENI among the summer food crops. Analysis of the water-food-energy nexus of forty-two Egyptian crops in year 2010 was caried out (energy consumed for irrigation represent 7.4% of the total energy footprint). WFENI can be applied to developed strategies for the optimal cropping pattern that minimizing the water and energy consumption and maximizing their productivity. It can be applied as a holistic tool to evaluate the progress in the water and agricultural national strategies. Moreover, WFENI could be applied yearly to evaluate the performance of the water-food-energy nexus managmant.

Proceedings of the specialist meeting on safety performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-05-28

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings.

Proceedings of the specialist meeting on safety performance indicators

International Nuclear Information System (INIS)

2002-01-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. On the initiative of the NEA/CSNI Working Group on Operating Experience the Spanish CSN hosted a workshop (Madrid, 2000) to review the state of the art on Safety Performance Indicators. This workshop, which was co-sponsored by the IAEA and WANO was attended by 73 participants from 19 countries, representing the industry, regulators, service companies as well as international organisations. The conclusions were: 1. there is considerable development effort on performance indicators in many countries; 2. utilities continue to rely on the WANO Performance indicators system which consists of indicators in 8 key areas and receives data from virtually all commercial NPP's in the world; 3. Regulators do not have a common set of performance indicators. This document gathers the 25 presentations given during this workshop. After this workshop, a joint CNRA/CSNI task group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's). The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001 and the work performed by the group is summarized in a report (NEA-CSNI-R--2001-11) attached in appendix to these proceedings

EPA Monthly Key Performance Indicator Dashboards 2017

Science.gov (United States)

Each month, the Web Analytics Program posts updated Key Performance Indicator (KPI) dashboards that correspond to three Web performance goals: content consumption, content discovery, and audience engagement.

Proposed system for measuring project performance using process-based key performance indicators

NARCIS (Netherlands)

Haponava, T.; Al-Jibouri, Saad H.S.

2012-01-01

Despite some evidence of its usefulness, performance measurement by using Key Performance Indicators (KPIs) in the construction industry also has its critics. Among the shortcomings attributed to existing KPIs is the fact that almost all of them are product oriented. This means that the indicators

Performance indicators for first quarter CY 1994

International Nuclear Information System (INIS)

1994-01-01

The Department of Energy (DOE) has established a Department-Wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment safety, and health (ES ampersand H) performance of the DOE at the Secretary and other management levels. This is the thirteenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG ampersand G Idaho, Inc., to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The report format and content adhere to the guidelines established In DOE Order 5480.26, Trending and Analysis of Operations Information Using Performance Indicators, and DOE-STD-1048-92, DOE Peformance Indicators Guidance Document

Development and application of Danish Key Performance Indicators for Railway Timetables

DEFF Research Database (Denmark)

Schittenhelm, Bernd; Landex, Alex

) by requiring improved products with reduced costs at the same time. Introducing Key Performance Indicators (KPI) can help achieve a higher efficiency. Creation of a feasible and attractive railway timetable is the most important process for both TOC and IM. When measuring the quality of the produced timetables......, one also measures the success of the applied timetabling process. KPI for railway timetables most be based on a common accepted set of timetabling criteria. This paper begins with a brief description of the process that lead to the creation of a common Danish list of prioritized timetabling evaluation...

Performance management when innovation and learning become critical performance indicators

NARCIS (Netherlands)

Molleman, E.; Timmerman, H.

2003-01-01

If the organization's leading performance indicators shift towards innovation and the creation of knowledge, this will result in more non-routine work and a higher level of interdependency among workers. We argue that a contingent performance management (PM) system has to focus on Learning and group

Performance and consistency of indicator groups in two biodiversity hotspots.

Directory of Open Access Journals (Sweden)

Joaquim Trindade-Filho

Full Text Available In a world limited by data availability and limited funds for conservation, scientists and practitioners must use indicator groups to define spatial conservation priorities. Several studies have evaluated the effectiveness of indicator groups, but still little is known about the consistency in performance of these groups in different regions, which would allow their a priori selection.We systematically examined the effectiveness and the consistency of nine indicator groups in representing mammal species in two top-ranked Biodiversity Hotspots (BH: the Brazilian Cerrado and the Atlantic Forest. To test for group effectiveness we first found the best sets of sites able to maximize the representation of each indicator group in the BH and then calculated the average representation of different target species by the indicator groups in the BH. We considered consistent indicator groups whose representation of target species was not statistically different between BH. We called effective those groups that outperformed the target-species representation achieved by random sets of species. Effective indicator groups required the selection of less than 2% of the BH area for representing target species. Restricted-range species were the most effective indicators for the representation of all mammal diversity as well as target species. It was also the only group with high consistency.We show that several indicator groups could be applied as shortcuts for representing mammal species in the Cerrado and the Atlantic Forest to develop conservation plans, however, only restricted-range species consistently held as the most effective indicator group for such a task. This group is of particular importance in conservation planning as it captures high diversity of endemic and endangered species.

Performance and consistency of indicator groups in two biodiversity hotspots.

Science.gov (United States)

Trindade-Filho, Joaquim; Loyola, Rafael Dias

2011-01-01

In a world limited by data availability and limited funds for conservation, scientists and practitioners must use indicator groups to define spatial conservation priorities. Several studies have evaluated the effectiveness of indicator groups, but still little is known about the consistency in performance of these groups in different regions, which would allow their a priori selection. We systematically examined the effectiveness and the consistency of nine indicator groups in representing mammal species in two top-ranked Biodiversity Hotspots (BH): the Brazilian Cerrado and the Atlantic Forest. To test for group effectiveness we first found the best sets of sites able to maximize the representation of each indicator group in the BH and then calculated the average representation of different target species by the indicator groups in the BH. We considered consistent indicator groups whose representation of target species was not statistically different between BH. We called effective those groups that outperformed the target-species representation achieved by random sets of species. Effective indicator groups required the selection of less than 2% of the BH area for representing target species. Restricted-range species were the most effective indicators for the representation of all mammal diversity as well as target species. It was also the only group with high consistency. We show that several indicator groups could be applied as shortcuts for representing mammal species in the Cerrado and the Atlantic Forest to develop conservation plans, however, only restricted-range species consistently held as the most effective indicator group for such a task. This group is of particular importance in conservation planning as it captures high diversity of endemic and endangered species.

Decision making in the electricity sector using performance indicators

Energy Technology Data Exchange (ETDEWEB)

Domingues, Nuno [ISEL-ADESPA, Lisbon (Portugal); FCT-UNL, Caparica (Portugal); Neves-Silva, Rui; Melo, Joao Joanaz de [FCT-UNL, Caparica (Portugal)

2017-02-15

The studies on the electricity sector are usually focused on the supply side, considering consumers as price-takers, i.e. assuming no demand elasticity. The present paper highlights the role of consumers on the electricity sector, assuming that consumers react to electricity prices and make decisions. Many studies focused on the demand side disaggregate consumers by activities, leading to a highly complex analyse. In the present paper, consumers are divided by three main types. In the present paper, the Government makes decisions on the measures to implement to influence the production and the consumption. To study the impact of the Government decisions, the present paper studies and implements a tool: a decision support system. This tool is based on a conceptual model and assists the task of test and analyse the electricity sector using scenarios to obtain a set of performance indicators that would allow to make quantitative balance and to eliminate unfeasible measures. The performance indicators quantify the technical, environmental, social and economical aspects of the electricity sector and help to understand the effect of consumer practices, production technology and Government measures on the electricity sector. Based on the scenarios produced, it is possible to conclude that the price signal is important for consumers and it is a way to guide their behaviour. It is also possible to conclude that is preferable to apply incentives on supporting energy-efficiency measures implementation than on reduce the price of electricity sold to consumers. (orig.)

Decision making in the electricity sector using performance indicators

International Nuclear Information System (INIS)

Domingues, Nuno; Neves-Silva, Rui; Melo, Joao Joanaz de

2017-01-01

The studies on the electricity sector are usually focused on the supply side, considering consumers as price-takers, i.e. assuming no demand elasticity. The present paper highlights the role of consumers on the electricity sector, assuming that consumers react to electricity prices and make decisions. Many studies focused on the demand side disaggregate consumers by activities, leading to a highly complex analyse. In the present paper, consumers are divided by three main types. In the present paper, the Government makes decisions on the measures to implement to influence the production and the consumption. To study the impact of the Government decisions, the present paper studies and implements a tool: a decision support system. This tool is based on a conceptual model and assists the task of test and analyse the electricity sector using scenarios to obtain a set of performance indicators that would allow to make quantitative balance and to eliminate unfeasible measures. The performance indicators quantify the technical, environmental, social and economical aspects of the electricity sector and help to understand the effect of consumer practices, production technology and Government measures on the electricity sector. Based on the scenarios produced, it is possible to conclude that the price signal is important for consumers and it is a way to guide their behaviour. It is also possible to conclude that is preferable to apply incentives on supporting energy-efficiency measures implementation than on reduce the price of electricity sold to consumers. (orig.)

Taylorism, Tylerism, and Performance Indicators: Defending the Indefensible?

Science.gov (United States)

Helsby, Gill; Saunders, Murray

1993-01-01

Explores the antecedents to the growing interest in the use of educational performance indicators. Discusses this issue in relation to the work of economist F. W. Taylor and evaluator Ralph Tyler. Describes a five-year project that demonstrates the promise of teacher-developed performance indicators. (CFR)

Interdisciplinary strate in applied performance and activism

OpenAIRE

Johansson, Ola

2014-01-01

The paper addresses the challenges and advantages of collaborative stratification in the continuum of theatre and fine arts, with examples from applied performance projects in international contexts. With different approaches to performance/media, acting/agency, devising/curatorship and participation/social engagement, collaborative processes have proved to be quite incongruent in method and motif, although inclusive and versatile in media tactics and political outreach. In post-Brechtian the...

Analysis of architect’s performance indicators in project delivery process

Science.gov (United States)

Marisa, A.

2018-03-01

Architect as a professional in the construction industry should possess a good performance in project delivery process. As a design professional, architect has an important role to ensure that the process is well-conducted by delivering a high-quality product for the clients. Thus, analyzing architect’s performance indicators is crucial in the project delivery process. This study aims to analyze the relative importance of architect performance indicators in project delivery process among registered architects in North Sumatera, Indonesia. A total of five indicators that measure architect performance in project delivery process were identified and 110 completed questionnaires were obtained and used for data analysis. A relative importance index is used to rank the relative importance of architect performance indicators. Results indicate that focus on the clients is the most important indicator of architect performance in project delivery process. This study demonstrates project communication as one of crucial indicators perceived by the architects for measuring their performance, and fills a knowledge gap on the importance of identifying the most important indicator for measuring architect performance from their own perspectives which previous studies have overlooked to improve performance assessment in project delivery process.

Constitutive Effects of Performance Indicators

DEFF Research Database (Denmark)

Dahler-Larsen, Peter

2014-01-01

that are demonstrably problematic. Based on a distinction between trivial and advanced measure fixation, an argument is made for constitutive effects that are based on less problematic assumptions. Through this conceptual move, the political dimension of performance indicators is appreciated. The conceptual dimensions...... of constitutive effects are carved out, empirical illustrations of their applicability are offered and implications discussed....

Benefits and limitations in the use of performance indicators

International Nuclear Information System (INIS)

Nobile, M.; Ceccantini, M.

1990-01-01

In the paper, some Caorso NPP performance indicators for 1982 through 1986 are shown according to the definition of the Institute of Nuclear Power Operations (INPO). The comparison of the Caorso NPP performance indicators with those of similar American plants stresses an analogous behaviour for all the indicators but two: (Industrial Safety Lost-Time Accident Rate and Diesel Generator Unavailability), for which there is a very significant difference. A subsequent analysis enhances, however, that this difference cannot be attributed to component performance or personnel management politics, but essentially to design choices and/or to peculiar social and economical context; if these factors are taken into consideration, the difference between the performance indicators of the Caorso plant and those of American plants is explained quite satisfactorily. This demonstrates, that even if the usefulness of the performance indicators is confirmed, a careful analysis of all the possible implications is necessary before reaching any final conclusion

Measuring individual work performance: Identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; de Vet, H.C.W.; van der Beek, A.J.

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions.

Measuring individual work performance: identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; Vet, H.C de; Beek, A.J. van der

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. OBJECTIVE: This

Continued Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

Science.gov (United States)

Delgado, Irebert R.; Dempsey, Paula J.; Antolick, Lance J.; Wade, Daniel R.

2013-01-01

This paper details analyses of condition indicator performance for the helicopter nose gearbox within the U.S. Army's Condition-Based Maintenance Program. Ten nose gearbox data sets underwent two specific analyses. A mean condition indicator level analysis was performed where condition indicator performance was based on a 'batting average' measured before and after part replacement. Two specific condition indicators, Diagnostic Algorithm 1 and Sideband Index, were found to perform well for the data sets studied. A condition indicator versus gear wear analysis was also performed, where gear wear photographs and descriptions from Army tear-down analyses were categorized based on ANSI/AGMA 1010-E95 standards. Seven nose gearbox data sets were analyzed and correlated with condition indicators Diagnostic Algorithm 1 and Sideband Index. Both were found to be most responsive to gear wear cases of micropitting and spalling. Input pinion nose gear box condition indicators were found to be more responsive to part replacement during overhaul than their corresponding output gear nose gear box condition indicators.

Gas-phase optical fiber photocatalytic reactors for indoor air application: a preliminary study on performance indicators

Science.gov (United States)

Palmiste, Ü.; Voll, H.

2017-10-01

The development of advanced air cleaning technologies aims to reduce building energy consumption by reduction of outdoor air flow rates while keeping the indoor air quality at an acceptable level by air cleaning. Photocatalytic oxidation is an emerging technology for gas-phase air cleaning that can be applied in a standalone unit or a subsystem of a building mechanical ventilation system. Quantitative information on photocatalytic reactor performance is required to evaluate the technical and economic viability of the advanced air cleaning by PCO technology as an energy conservation measure in a building air conditioning system. Photocatalytic reactors applying optical fibers as light guide or photocatalyst coating support have been reported as an approach to address the current light utilization problems and thus, improve the overall efficiency. The aim of the paper is to present a preliminary evaluation on continuous flow optical fiber photocatalytic reactors based on performance indicators commonly applied for air cleaners. Based on experimental data, monolith-type optical fiber reactor performance surpasses annular-type optical fiber reactors in single-pass removal efficiency, clean air delivery rate and operating cost efficiency.

Safety performance indicators for the road network.

NARCIS (Netherlands)

Weijermars, W. Gitelman, V. Papadimitriou, E. Lima De & Azevedo, C.

2010-01-01

Within the 6th FP European project SafetyNet, a team has worked on the development of Safety Performance Indicators (SPIs) on seven road safety related areas. These SPIs reflect the operational conditions of the road traffic system that influence the system's safety performance. SPIs were developed

Interpreting ecological diversity indices applied to terminal restriction fragment length polymorphism data: insights from simulated microbial communities.

Science.gov (United States)

Blackwood, Christopher B; Hudleston, Deborah; Zak, Donald R; Buyer, Jeffrey S

2007-08-01

Ecological diversity indices are frequently applied to molecular profiling methods, such as terminal restriction fragment length polymorphism (T-RFLP), in order to compare diversity among microbial communities. We performed simulations to determine whether diversity indices calculated from T-RFLP profiles could reflect the true diversity of the underlying communities despite potential analytical artifacts. These include multiple taxa generating the same terminal restriction fragment (TRF) and rare TRFs being excluded by a relative abundance (fluorescence) threshold. True community diversity was simulated using the lognormal species abundance distribution. Simulated T-RFLP profiles were generated by assigning each species a TRF size based on an empirical or modeled TRF size distribution. With a typical threshold (1%), the only consistently useful relationship was between Smith and Wilson evenness applied to T-RFLP data (TRF-E(var)) and true Shannon diversity (H'), with correlations between 0.71 and 0.81. TRF-H' and true H' were well correlated in the simulations using the lowest number of species, but this correlation declined substantially in simulations using greater numbers of species, to the point where TRF-H' cannot be considered a useful statistic. The relationships between TRF diversity indices and true indices were sensitive to the relative abundance threshold, with greatly improved correlations observed using a 0.1% threshold, which was investigated for comparative purposes but is not possible to consistently achieve with current technology. In general, the use of diversity indices on T-RFLP data provides inaccurate estimates of true diversity in microbial communities (with the possible exception of TRF-E(var)). We suggest that, where significant differences in T-RFLP diversity indices were found in previous work, these should be reinterpreted as a reflection of differences in community composition rather than a true difference in community diversity.

Operational safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

2000-05-01

Since the late 1980s, the IAEA has been actively sponsoring work in the area of indicators to monitor nuclear power plant (NPP) operational safety performance. The early activities were mainly focused on exchanging ideas and good practices in the development and use of these indicators at nuclear power plants. Since 1995 efforts have been directed towards the elaboration of a framework for the establishment of an operational safety performance indicator programme. The result of this work, compiled in this publication, is intended to assist NPPs in developing and implementing a monitoring programme, without overlooking the critical aspects related to operational safety performance. The framework proposed in this report was presented at two IAEA workshops on operational safety performance indicators held in Ljubljana, Slovenia, in September 1998 and at the Daya Bay NPP, Szenzhen, China, in December 1998. During these two workshops, the participants discussed and brainstormed on the indicator framework presented. These working sessions provided very useful insights and ideas which where used for the enhancement of the framework proposed. The IAEA is acknowledging the support and contribution of all the participants in these two activities. The programme development was enhanced by pilot plant studies. Four plants from different countries with different designs participated in this study with the objective of testing the applicability, usefulness and viability of this approach

Human Resources Key Performance Indicators

Directory of Open Access Journals (Sweden)

Gabčanová Iveta

2012-03-01

Full Text Available The article brings out a proposed strategy map and respective key performance indicators (KPIs in human resources (HR. The article provides an overview of how HR activities are supported in order to reach the partial goals of HR as defined in the strategic map. Overall the aim of the paper is to show the possibilities of using the modern Balanced Scorecard method in human capital.

Analysis of ESG indicators for measuring enterprise performance

Directory of Open Access Journals (Sweden)

Zuzana Chvátalová

2013-01-01

Full Text Available In this article authors focus on the analysis of the whole set of environmental, social and corporate governance (ESG indicators for the elimination of double or triple effects within the next construction of methods for measuring corporate performance. They build on their previously published results (in Acta univ. agric. et silvic. Mendel. Brun., 2012. The partial actual selected results of a recently undertaken currently project entitled ‘Construction of Methods for Multifactorial Assessment of Company Complex Performance in Selected Sectors’ were used. This project was solved the research teams of the Faculty of Business and Management of Brno University Technology and Faculty of Business and Economics of Mendel University in Brno since 2011. Further theoretical resources in the environmental, social and corporate governance area, known indicator databases (namely Global Reporting Initiative, comparative analysis, resp. syntheses for identifying possible of common indicator properties were identified to classify indicator subsets to preclude double or even triple effect based on mathematical set theory (Venn diagrams. The indicator analysis in constructed multi-factorial methods contributes to precise decision making in management to improve corporate performance.

Energy performance indicator report: fluid milk plants

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

In Canada, the dairy sector consumes significant amounts of energy and is looking for new ways of saving energy. The aim of this study, performed by the Competitive Analysis Centre Inc., was to find novel energy savings ideas for fluid milk plants. For this purpose, the energy consumption of 17 fluid milk plants, which accounts for over 50% of total Canadian output, was analyzed; first, at the plant level, and then by 8 categories at the sub-plant level in order to develop benchmarks that could be applied at both these levels. The paper provides background information on Canada's fluid milk sector and outlines the methodology used to develop and apply energy efficiency measures in the sector; the study findings are also presented. This report found that the energy consumption of the Canadian fluid milk sector could be lowered by applying the energy saving proposals developed herein.

ROLE AND IMPORTANCE OF KEY PERFORMANCE INDICATORS MEASUREMENT

Directory of Open Access Journals (Sweden)

Rade Stanković

2011-03-01

Full Text Available Key performance indicators are financial and non financial indicators that organizations use inorder to estimate and fortify how successful they are, aiming previously established long lastinggoals. Appropriate selection of indicators that will be used for measuring is of a greatest importance.Process organization of business is necessary to be constitute in order to realize such effective andefficient system or performance measuring via KPI. Process organization also implies customerorientation and necessary flexibility in nowadays condition of global competition.Explanation of process organization, the way of KPI selection, and practical example of KPImeasuring in Toyota dealerships are presented in this paper.

Numerical indicators of nuclear power plant safety performance

International Nuclear Information System (INIS)

1991-04-01

The workshop was attended by representatives from twenty-two Member States operating nuclear power plants (NPP). The current status of the development and use of numerical indicators of NPP safety performance was presented. A consensus on the benefits of use of numerical indicators was reached. The Technical Committee Meeting reviewed the progress in the development and use of performance indicators and identified them as the most appropriate ones for international use. The purpose of this document is to summarize the discussions held and conclusions reached in both meetings. Lists of participants and all the papers of both meetings are presented

Performance indicator of a bridge expansion joint

NARCIS (Netherlands)

Kalkman, I.M.; Lentzen, S.S.K.; Courage, W.M.G.; Napoles, O.M.; Galanti, F.M.B.

2011-01-01

In general the condition of a structure can be assessed in terms of a performance indicator. For example, this can be the strength of a structure. An asset manager is concerned with ensuring that the performance of a structure does not fall below a given minimum level. This can be achieved by

Safety assessment, safety performance indicators at the Paks Nuclear Power Plant

International Nuclear Information System (INIS)

Baji, C.; Vamos, G.; Toth, J.

2001-01-01

The Paks Nuclear Power Plant has been using different methods of safety assessment (event analysis, self-assessment, probabilistic safety analysis), including performance indicators characterizing both operational and safety performance since the early years of operation of the plant. Regarding the safety performance, the indicators include safety system performance, number of scrams, release of radioactive materials, number of safety significant events, industrial safety indicator, etc. The Paks NPP also reports a set of ten indicators to WANO Performance Indicator Programme which, among others, include safety related indicators as well. However, a more systematic approach to structuring and trending safety indicators is needed so that they can contribute to the enhancement of the operational safety. A more comprehensive set of indicators and a systematic evaluation process was introduced in 1996. The performance indicators framework proposed by the IAEA was adapted to Paks in this year to further improve the process. Safety culture assessment and characterizing safety culture is part of the assessment process. (author)

Performance Monitoring Applied to System Supervision

Directory of Open Access Journals (Sweden)

Bertille Somon

2017-07-01

Full Text Available Nowadays, automation is present in every aspect of our daily life and has some benefits. Nonetheless, empirical data suggest that traditional automation has many negative performance and safety consequences as it changed task performers into task supervisors. In this context, we propose to use recent insights into the anatomical and neurophysiological substrates of action monitoring in humans, to help further characterize performance monitoring during system supervision. Error monitoring is critical for humans to learn from the consequences of their actions. A wide variety of studies have shown that the error monitoring system is involved not only in our own errors, but also in the errors of others. We hypothesize that the neurobiological correlates of the self-performance monitoring activity can be applied to system supervision. At a larger scale, a better understanding of system supervision may allow its negative effects to be anticipated or even countered. This review is divided into three main parts. First, we assess the neurophysiological correlates of self-performance monitoring and their characteristics during error execution. Then, we extend these results to include performance monitoring and error observation of others or of systems. Finally, we provide further directions in the study of system supervision and assess the limits preventing us from studying a well-known phenomenon: the Out-Of-the-Loop (OOL performance problem.

Operational safety performance indicator system at the Dukovany Nuclear Power Plant - Experience with indicator aggregation

International Nuclear Information System (INIS)

Mandula, J.

2001-01-01

The operational safety performance indicators serve as an important tool of performance monitoring and management at the Dukovany NPP. A software-supported system has been developed, which has included: data collection, central data storage, graphic output production and periodical report generation. Analyses of performance indicator trends together with evaluation in respect of annually updated target values and acceptance criteria are used for operational safety reviews forming an integral part of continual self-assessment process. This contribution has been focused on experience obtained during development of the operational safety assessment model using indicator aggregation. It summarises problems that had to be paid specific attention in the development process. Thanks to their solution, the model has become a synoptic monitor and a useful tool for operational safety assessment. (author)

Performance indicators for rinderpest surveillance

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-12-01

In 1986, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a programme of assistance to FAO and IAEA Member States for the development of effective, quality assured veterinary laboratory diagnostic services. This programme introduced the use of standardized and internationally validated ELISA-based systems for the diagnosis and surveillance of the major transboundary diseases that affect livestock. This approach has proved of immense value in the monitoring of national, regional and global animal disease control and eradication programmes. One such programme focuses on the global elimination of rinderpest. Co-ordinated by FAO through the Global Rinderpest Eradication Programme (GREP) the joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has developed critical diagnostic and epidemiological tools to assist this effort. As the final stages of the global eradication of rinderpest are reached, it is fitting that the Joint Division should again take the lead in providing guidance to Member States on how best to meet the criteria for quality assurance of national disease surveillance programmes - a prerequisite for international acceptance of freedom from a particular disease. This publication is intended to provide countries involved in rinderpest eradication with a detailed protocol for using performance indicators in evaluating their disease surveillance system and making, where necessary, adjustments to meet the criteria for acceptance specified in the OIE Rinderpest Pathway - a pathway that leads to international recognition of freedom from rinderpest. An initial publication (IAEA-TECDOC-1161) described guidelines for the use of performance indicators in rinderpest surveillance programmes. This publication now describes in detail the protocols and the linked indicators which have been developed and field validated through a series of FAO/IAEA meetings and through IAEA expert assignments to countries in Africa.

Performance indicators for rinderpest surveillance

International Nuclear Information System (INIS)

2001-12-01

In 1986, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture initiated a programme of assistance to FAO and IAEA Member States for the development of effective, quality assured veterinary laboratory diagnostic services. This programme introduced the use of standardized and internationally validated ELISA-based systems for the diagnosis and surveillance of the major transboundary diseases that affect livestock. This approach has proved of immense value in the monitoring of national, regional and global animal disease control and eradication programmes. One such programme focuses on the global elimination of rinderpest. Co-ordinated by FAO through the Global Rinderpest Eradication Programme (GREP) the joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has developed critical diagnostic and epidemiological tools to assist this effort. As the final stages of the global eradication of rinderpest are reached, it is fitting that the Joint Division should again take the lead in providing guidance to Member States on how best to meet the criteria for quality assurance of national disease surveillance programmes - a prerequisite for international acceptance of freedom from a particular disease. This publication is intended to provide countries involved in rinderpest eradication with a detailed protocol for using performance indicators in evaluating their disease surveillance system and making, where necessary, adjustments to meet the criteria for acceptance specified in the OIE Rinderpest Pathway - a pathway that leads to international recognition of freedom from rinderpest. An initial publication (IAEA-TECDOC-1161) described guidelines for the use of performance indicators in rinderpest surveillance programmes. This publication now describes in detail the protocols and the linked indicators which have been developed and field validated through a series of FAO/IAEA meetings and through IAEA expert assignments to countries in Africa

System of performance indicators for SMEs, metalworking sector

Directory of Open Access Journals (Sweden)

Cristina Viteri Sánchez

2014-03-01

Full Text Available (Received: 2013/03/05 - Accepted: 2013/03/25This paper focused on the design and proposal of management indicators for small and medium metalworking enterprises (SMEs in Quito. Metalworking number was established for the study. It was met and determined which areas deserve to be constantly monitored, by analyzing the performance of the companies, for this purpose, it was used a SWOT analysis, interviews and meetings with company managers , the results demanded the approach of a generic strategy, which included the formulation of the mission , vision and corporate values. Objectives and goals were established, they were classified according to the four perspectives of the Balanced Scorecard. Then it was possible to identify indicators to measure the proper functioning of the strategy proposed. 10 indicators of management were developed, according to the analysis of the reality of metalworking enterprises. So it was determined 3 financial indicators, 2 indicators focused on customers, 3 indicators for monitor internal business processes and 2 addressed the prospect of learning and growth. The use of these indicators is the key of performance and process control in each metalworking company.

Appraisal of key performance indicators on road infrastructure ...

African Journals Online (AJOL)

As Public-Private Partnerships (PPPs) are being practiced in most parts of the world, the need to adopt a system mechanism to evaluate the performance is imperative. The paper evaluates sustainable key performance indicators (KPIs) with a view to appreciating times of improved performance or otherwise. Eleven ...

Peer groups and operational cycle enhancements to the performance indicator report

International Nuclear Information System (INIS)

Stromberg, H.M.; DeHaan, M.S.; Gentillon, C.D.; Wilson, G.E.; Vanden Heuvel, L.N.

1992-01-01

Accurate performance evaluation and plant trending by the performance indicator program are integral parts of monitoring the operation of commercial nuclear power plants. The presentations of the NRC/AEOD performance indicator program have undergone a number of enhancements. The diversity of the commercial nuclear plants, coupled with continued improvements in the performance indicator program, has resulted in the evaluation of plants in logical peer groups and highlighted the need to evaluate the impact of plant operational conditions on the performance indicators. These enhancements allow a more-meaningful evaluation of operating commercial nuclear power plant performance. This report proposes methods to enhance the presentation of the performance indicator data by analyzing the data in logical peer groups and displaying the performance indicator data based on the operational status of the plants. Previously, preliminary development of the operational cycle displays of the performance indicator data was documented. This report extends the earlier findings and presents the continued development of the peer groups and operational cycle trend and deviation data and displays. This report describes the peer groups and enhanced PI data presentations by considering the operational cycle phase breakdowns, calculation methods, and presentation methods

The improvement of environmental performances by applying ISO 14001 standard: A case study

Directory of Open Access Journals (Sweden)

Živković Snežana

2013-01-01

Full Text Available This paper presents the analysis of the advantages of applying ISO 14001 system in an environmental protection management system. The environmental protection management system which is not licensed, i.e., compatible with the principles and standard pre-conditions considerably increases the plausibility for ecological risk. There are some issues that remain to be solved in the areas which are not expressed by financial values only but also have a non-financial character with the aim of expanding markets, company image improvement and improvement of the environmental performance indicators. By improving a company’s environmental management system efficiency we expect to achieve the minimization and elimination of damaging influences on the environment which are the consequence of company’s activities. A case study in the Oil Refinery Belgrade (RNB analyses the implementation of the standard ISO 14001:2004 into its environment protection management system, particularly emphasizing the company’s own way of evaluating the environment aspects with the aim of establishing results of ecological performances indicators improvement. The average values of the first ecological indicator of the plant, the total amount of the waste waters in m3 per a ton of product, clearly show the downturn trend, which is confirmed by the proportional reduction of the second ecological plant indicator, that is by the flocculants consumption (Al2(SO43, Na2CO3 in kg per m3 of the waste water of the Oil Refinery of Belgrade for the given period 2008-2010. Case study RNB confirms the improvement of environmental performances using the ISO 14001 standard.

Facilities Performance Indicators Report, 2006-07

Science.gov (United States)

Glazner, Steve, Ed.

2008-01-01

The "Facilities Performance Indicators Survey" ("FPI") supersedes and builds upon the two major surveys APPA conducted in the past: the Comparative Costs and Staffing (CCAS) survey and the Strategic Assessment Model (SAM). The "FPI" covers all the materials collected in CCAS and SAM, along with some select new data points and improved survey…

SYSTEM OF PERFORMANCE INDICATORS FOR THE STUDENT CENTRED EDUCATION

Directory of Open Access Journals (Sweden)

Roșca Remus Dorel

2015-07-01

Full Text Available The higher education system in Romania is facing a number of challenges coming from its external and internal environment, challenges which threaten even its very own survival. The significant decrease in the number of high school graduates, the increasing disengagement of the new generations towards the idea of study, the marketing myopia that has characterised the university management act are just a few of the challenges that compel the responsible policymakers to adopt a new management philosophy, a philosophy which has as central point the student centred education paradigm (SCE. For operationalizing this philosophy in the current practice of Romanian universities, it is necessary to develop and use a system of performance indicators for the student-centred education (SPISCE. This system would have the purpose: to monitor the performances obtained in time by the higher education institution (HEI, allowing their comparison with those of other competing institutions; to allow the identification of areas where a significant improvement in SCE is needed; to facilitate the establishment of a client oriented marketing strategy within the institution; to create a favourable framework for promoting an organizational culture specific to SCE among teaching staff members and to redesign their rewards system, taking into account their performances in practicing the SCE. We will conceive the SPISCE starting from the process model, resulting three major categories: input-specific performance indicators, process-specific performance indicators and output-specific performance indicators. The academic year pass rate, the retention rate, the number of graduates who continue with master studies, lifetime value are just a few examples of such indicators. Measuring them will help the management team of a university to understand the supremacy of relational marketing compared to the transactional one, the importance of holding on to students and not just

Key performance indicators in hospital based on balanced scorecard model

Directory of Open Access Journals (Sweden)

Hamed Rahimi

2017-01-01

Full Text Available Introduction: Performance measurement is receiving increasing verification all over the world. Nowadays in a lot of organizations, irrespective of their type or size, performance evaluation is the main concern and a key issue for top administrators. The purpose of this study is to organize suitable key performance indicators (KPIs for hospitals’ performance evaluation based on the balanced scorecard (BSC. Method: This is a mixed method study. In order to identify the hospital’s performance indicators (HPI, first related literature was reviewed and then the experts’ panel and Delphi method were used. In this study, two rounds were needed for the desired level of consensus. The experts rated the importance of the indicators, on a five-point Likert scale. In the consensus calculation, the consensus percentage was calculated by classifying the values 1-3 as not important (0 and 4-5 to (1 as important. Simple additive weighting technique was used to rank the indicators and select hospital’s KPIs. The data were analyzed by Excel 2010 software. Results: About 218 indicators were obtained from a review of selected literature. Through internal expert panel, 77 indicators were selected. Finally, 22 were selected for KPIs of hospitals. Ten indicators were selected in internal process perspective and 5, 4, and 3 indicators in finance, learning and growth, and customer, respectively. Conclusion: This model can be a useful tool for evaluating and comparing the performance of hospitals. However, this model is flexible and can be adjusted according to differences in the target hospitals. This study can be beneficial for hospital administrators and it can help them to change their perspective about performance evaluation.

Establishing reliability of performance indicator of sepak takraw ...

African Journals Online (AJOL)

The aim of this study is to establish the necessary reliability in the notational analysis of sepak takraw. Two performance analysts were recruited to help in the collection of the data. The performances were analyzed based on the main performance indicators relevant to the demand of the game. Cronbach's alpha and ...

Construction of corporate social performance indicators for Czech manufacturing industry

Directory of Open Access Journals (Sweden)

Marie Dočekalová

2013-01-01

Full Text Available This article aims to map out the level of social performance measurement of Czech companies, i.e. what social performance indicators companies monitor and what information they provide to their stakeholders and to construct alternative corporate social performance indicators. Based on an analysis of 24 corporate voluntary reports and results of an empirical research performed among 79 large companies operating in the manufacturing industry, it was found that companies partially monitor their social performance, but from the perspective of international standards (e.g. Global Reporting Initiative, International Federation of Accountants it is still insufficient. Czech companies usually provide only absolute numbers which disguise real trends and do not allow year on year comparison or comparison with other companies. Czech companies should provide a comprehensive picture of their overall performance, they should not focus only on financial indicators based on accounting data, since it is known that the performance measurement based only on financial and economic performance does not lead to long-term success and sustainability of organizations. Companies should monitor more their impact on society within which they operate. Proposed corporate social performance indicators in a measurable and thus manageable way express social issues.

20 CFR 641.710 - How are the performance indicators defined?

Science.gov (United States)

2010-04-01

... customer satisfaction surveys administered to each of these three customer groups. The Department will... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false How are the performance indicators defined... § 641.710 How are the performance indicators defined? (a) The core indicators are defined as follows: (1...

Facilities Performance Indicators Report 2012-13: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2014

2014-01-01

This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance Indicators Report" is designed for survey…

Performance Indicators for Online Geography in Secondary Education

NARCIS (Netherlands)

van Diepen, P.; Bredeweg, B.; Bosse, T.; Bredeweg, B.

2016-01-01

There is little consensus about what variables extracted from learner data are the most reliable indicators of learning performance. The aim of this study was to determine those indicators by taking a wide range of variables into consideration concerning overall learning activity and content

Designing environmental performance indicators (EPIs) for eco-efficiency

International Nuclear Information System (INIS)

Campbell, B.

1997-01-01

Environmental performance indicators (EPI) were discussed and a method by which companies can design indicators to help measure their progress toward greater eco-efficiency was presented. EPIs are quantitative measures of environmental performance. EPIs can measure one attribute, such as effluent released to water, or they can be a complex index. EPIs track impacts on the environment and provide information for decision making. The need for more eco-efficient companies, i.e. companies that produce useful goods and services while reducing their consumption of resources and while making efforts to reduce pollution, was emphasized

Engineering performance indicators in support of corporate goals and objectives

International Nuclear Information System (INIS)

Prawlocki, F.C.; Holland, M.B.

1992-01-01

In the late 1980s, a new factor was introduced into the equation of rate making: competition. Prior to this time, most utilities only had to prove to the state public service commission (PSC) that a rate increase was justified. Even this had become more difficult in recent years as PSCs implemented prudency audits as a means of determining the efficiency of utility management. Recently, however, the need for performance improvement has been initiated internally by utility management because of the advent of competition in the utility environment and state PSC inquiries. In 1991, TVA began to realign its traditional program of performance indicators to agree with industry standards and provide more extensive indicators of positive and negative trends in performance. The INPO Guideline 88-016, Guidelines for the Conduct of Design Engineering, was used as the basis for most indicators. In addition, indicators were added to highlight specific corporate objectives, problems, or regulatory commitments. The indicators are being initiated in three phases as efficient sources of performance data are identified. Once the current baseline was established, a review was made of the best utilities in the country based on the US Nuclear Regulatory Commission's systematic assessment of licensee's performance and INPO performance indicators to establish performance goals. As total quality management and cycle time reduction programs are implemented, all of the organization's annual goals and objectives are expected to more closely reflect the best of the industry

An aggregated energy security performance indicator

International Nuclear Information System (INIS)

Martchamadol, Jutamanee; Kumar, S.

2013-01-01

Highlights: ► AESPI shows a country’s (or province’s) energy security status. ► AESPI considers social, economic and environmental aspects using 25 indicators. ► AESPI shows the impact of the trend of energy policies/measures. ► AESPI could be a tool for monitoring and evaluating the impact of energy policies. -- Abstract: An “Aggregated Energy Security Performance Indicator (AESPI)” has been developed by considering 25 individual indicators representing social, economy and environmental dimensions. The principle used, data required and the methodology for the development of AESPI have been detailed. AESPI requires time series data for its development and its value ranges from 0 to 10. The characteristics of AESPI have been compared with the existing indicators in terms of methodology, data requirements, analysis possible and the applications. The advantages of AESPI is that it not only assists in knowing the past energy security status of a country, but also helps in assessing the future status considering the energy policies and plans of the country, thus enabling the monitoring of the impacts of the policies.

Improving engineering performance by utilizing process indicators

International Nuclear Information System (INIS)

Roberts, T.E.

1992-01-01

The purpose of the work discussed in this paper was to develop engineering performance indicators used to facilitate improvement to the technical quality, cost-effectiveness, and delivery of engineering products and service. This work was specifically tailored for engineering support products and service associated with operating Florida Power and Light Company (FP and L) nuclear plants. The engineering process for the development of plant change packages was reviewed to identify critical in-process activities. Because each engineering project usually deals with a specific component or plant system, the different tasks are usually technically unique and of varying magnitudes. Although each engineering product may employ different analytical techniques or industry code requirements, several activities in documenting the engineering design process are generic. The quality of performance in these activities can be monitored analogously to the steps in a manufacturing process. This concept builds quality concepts into the package in lieu of inspecting package quality at the end of the process. The work has resulted in a valuable self-assessment tool that serves as a basis for engineering process improvements. The indicators are published in a semi-yearly performance report for FP and L contractors as well as FP and L in-house engineering work. Contracts have been set up to base fees on meeting targets established for the performance report. The ability to meet performance targets continues to improve

Applying Quality Indicators to Single-Case Research Designs Used in Special Education: A Systematic Review

Science.gov (United States)

Moeller, Jeremy D.; Dattilo, John; Rusch, Frank

2015-01-01

This study examined how specific guidelines and heuristics have been used to identify methodological rigor associated with single-case research designs based on quality indicators developed by Horner et al. Specifically, this article describes how literature reviews have applied Horner et al.'s quality indicators and evidence-based criteria.…

Game Indicators Determining Sports Performance in the NBA.

Science.gov (United States)

Mikołajec, Kazimierz; Maszczyk, Adam; Zając, Tomasz

2013-01-01

The main goal of the present study was to identify basketball game performance indicators which best determine sports level in the National Basketball Association (NBA) league. The research material consisted of all NBA game statistics at the turn of eight seasons (2003-11) and included 52 performance variables. Through detailed analysis the variables with high influence on game effectiveness were selected for final procedures. It has been proven that a limited number of factors, mostly offensive, determines sports performance in the NBA. The most critical indicators are: Win%, Offensive EFF, 3rd Quarter PPG, Win% CG, Avg Fauls and Avg Steals. In practical applications these results connected with top teams and elite players may help coaches to design better training programs.

Information Security Governanceas as Key Performance Indicator for Financial Institutions

OpenAIRE

Krjukovs, D; Strauss, R

2009-01-01

Due to their nature financial institutions and their performance are in constant focus of attention from different stakeholder groups. These groups according to their functions and interests are implementing different sets of key performance indicators for financial institution performance assessment. In the proposed paper authors present a hypothesis of information security governance being a financial institution key performance indicator. Authors provide high level overview of ...

Public services for distribution of drinking water and liquid sanitation in urban zones in Morocco Relevance of introduction the performance indicators for preservation water resources.

Science.gov (United States)

Habib, Akka; Abdelhamid, Bouzidi; Said, Housni

2018-05-01

Because of the absence of regulations and specific national norms, the unilaterally applied indicators for performance evaluation of water distribution management services are insufficient. This does not pave the way for a clear visibility of water resources. The indicators are also so heterogeneous that they are not in equilibrium with the applied management patterns. In fact: 1- The performance (yield and Linear loss index) of drinking water networks presents a discrepancy between operators and lack of homogeneity in terms of parameters put in its equation. Hence, It these indicators lose efficiency and reliability; 2- Liquid sanitation service has to go beyond the quantitative evaluation target in order to consider the qualitative aspects of water. To reach this aim, a reasonable enlargement of performance indicators is of paramount importance in order to better manage water resource which is becoming scarce and insufficient.

Further Education Performance Indicators: A Motivational or a Performative Tool?

Science.gov (United States)

Boocock, Andrew

2013-01-01

Ethnographic research in a further education College (Borough College) between 2000 and 2005 assessed the impact of performance indicators (PIs) within a department teaching GCSEs and A-levels. Research focused on PIs integral to the Learning and Skills Council funding formula, the Common Inspection Framework and newspaper league tables, and the…

Indicators to monitor NPP safety performance. Working material

International Nuclear Information System (INIS)

1997-01-01

Numerical indicators to monitor safety status and overall safety performance of nuclear power plants (NPPs) are used by operators and some regulators worldwide. During the last few years, the IAEA, through Technical Committee Meetings and Consultants' Meetings has worked on this area. This report presents a framework for nuclear power plant safety performance indicators that was developed during two consultant meetings held at the IAEA headquarters in Vienna in December 1995 and November 1996. Annex 2 on risk based indicators was prepared during a consultants' meeting held in Vienna in July 1996. An additional outcome from these activities, was the recommendation that the IAEA conduce pilot exercises at several nuclear power plants that might be interested to participate, in order to test the validity of the concept and its usefulness. 6 figs

Performance indicators at Embalse NPP: PSA and safety system indicators based on PSA models

International Nuclear Information System (INIS)

Fornero, D.A.

2001-01-01

Several indicators have been implemented at Embalse NPP. The objective was selecting some representative parameters to evaluate the performance of both the plant and the personnel activities, important for safety. A first set of indicators was defined in accordance with plant technical staff criteria. A complementary set of them was addressed later based on WANO guidance. This report presents the set of indicators used at Embalse NPP, centering the description to related to safety systems performance indicators (SSPI). Some considerations are done about the calculation methods, the need for aligning and updating their values following Embalse Probabilistic Safety Assessment (PSA) development, and some pros and cons of using the PSA model for getting systems indicators. Owing to the fact that PSA ownership by utilities is also a subject of the meeting, some characteristics of the organization of the PSA Project are described at the beginning of the report. At Embalse NPP a Level 1 PSA has been developed under the responsibility of its own plant and with an important contribution from the IAEA. PSA was developed at the site, conducting this to a study strongly interactive with the station staff. (author)

Process performance indicators in project pre-design stage

NARCIS (Netherlands)

Haponava, T.; Al-Jibouri, Saad H.S.; Reymen, Isabelle; Scheublin, F.; Pronk, A.; Prins, M.; Emmitt, S.; den Otter, A

2006-01-01

Traditionally performance in construction is measured based on the "iron-triangle”- time, cost and quality. In recent years indicators have been developed to include the measurements of other aspects of project performance. The main shortcoming of these however is that most of them are lagging

Performance indicators: A tool for continuous quality improvement

Directory of Open Access Journals (Sweden)

Nidhi M Bhatnagar

2016-01-01

Full Text Available Background: Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI. Materials and Methods: The present study was a retrospective study where the performance indicator (PI data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. "Shifts" or "Trends", if any, were identified and Corrective and Preventive Action (CAPA taken accordingly. At the end, outcomes of the analysis were charted. Results: After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Conclusion: Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

Performance indicators: A tool for continuous quality improvement.

Science.gov (United States)

Bhatnagar, Nidhi M; Soni, Shital; Gajjar, Maitrey; Shah, Mamta; Shah, Sangita; Patel, Vaidehi

2016-01-01

Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine) to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI). The present study was a retrospective study where the performance indicator (PI) data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. Shifts or Trends, if any, were identified and Corrective and Preventive Action (CAPA) taken accordingly. At the end, outcomes of the analysis were charted. After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

Amalgamation of performance indicators to support NRC senior management reviews

International Nuclear Information System (INIS)

Wreathall, J.; Schurman, D.; Modarres, M.; Mosleh, A.; Anderson, N.; Reason, J.

1991-01-01

The purpose of this project is to develop a methodology for amalgamating performance indicators to provide an overall perspective on plant safety, as one input to Nuclear Regulatory Commission's (NRC) senior management reviews of plant safety. These reviews are used to adjust the level of oversight by NRC. Work completed to date includes the development of frameworks for relating indicator measures to safety, a classification scheme for performance indicators, and a mapping process to portray indicators in the frameworks

The Qualitative Study of Key Performance Indicator on PT. Jiwasraya Manado

OpenAIRE

Rangian, Geby Melisa; Tumewu, Ferdinand

2014-01-01

Key Performance Indicator (KPI) is one of the most common tools used by the employees of companies to help manage more effectively and guide their progress. To perceive how far the achievement and the performance of the company, PT. Jiwasraya Manado use the Key Performance Indicator (KPI) to reveal the performance of the company. The objective of this study is to analyze the importance from the implementation of the key performance indicator for the insurance employee. There are several facts...

Development of safety performance indicators of regulatory interest (SAFPER) in Pakistan

International Nuclear Information System (INIS)

Khatoon, Abida

2002-01-01

Safety performance indicators provide a very useful tool for monitoring operational safety of a nuclear power plant. Utilities in many countries have developed plant specific indicators for the assessment of their performance and safety. Regulators can make use of some of these indicators for their regulatory assessment. In addition to these regulatory bodies in some countries have also developed programs for the formulation of safety performance indicators which are used in monitoring operational safety and regulatory decision making. Realizing its usefulness Directorate of Nuclear Safety and Radiation Protection (DNSRP-the regulatory body in Pakistan) has also initiated a country specific program for the development of Safety Performance Indicators (SAFPER) based on data provided by the utility and that collected during the course of regulatory inspections. Selected areas of NPP operation to be monitored are: - Significant events; - Safety systems performance; - Barriers integrity; - Environment protection; - Workers radiation safety; and - Emergency Preparedness. One of the objectives of this program is also to monitor the effectiveness of DNSRP regulatory activities. IAEA framework is taken as one of the bases for our program. Safety performance will be assessed on the basis of Performance Indicators and inspection findings. DNSRP program as shown in Appendix includes the indicators in use and under development. It is felt that the term Safety Performance Indicators may be termed as 'SAFPER Indicators' to be used by the Regulators, as it is clear from this presentation that utility safety performance indicators together with the regulatory effectiveness indicators constitute the measure for the adequate safety to the public and the environment. Additional research is still necessary for: - indicator definition for the proposed and under developed indicators; - data collection systems; - thresholds; - trend analysis; - goal setting (benefit from the trend can be

Integrated Initiating Event Performance Indicators

International Nuclear Information System (INIS)

S. A. Eide; Dale M. Rasmuson; Corwin L. Atwood

2005-01-01

The U.S. Nuclear Regulatory Commission Industry Trends Program (ITP) collects and analyses industry-wide data, assesses the safety significance of results, and communicates results to Congress and other stakeholders. This paper outlines potential enhancements in the ITP to comprehensively cover the Initiating Events Cornerstone of Safety. Future work will address other cornerstones of safety. The proposed Tier 1 activity involves collecting data on ten categories of risk-significant initiating events, trending the results, and comparing early performance with prediction limits (allowable numbers of events, above which NRC action may occur). Tier 1 results would be used to monitor industry performance at the level of individual categories of initiating events. The proposed Tier 2 activity involves integrating the information for individual categories of initiating events into a single risk-based indicator, termed the Baseline Risk Index for Initiating Events or BRIIE. The BRIIE would be evaluated yearly and compared against a threshold. BRIIE results would be reported to Congress on a yearly basis

Optimal energy management of urban rail systems: Key performance indicators

International Nuclear Information System (INIS)

González-Gil, A.; Palacin, R.; Batty, P.

2015-01-01

Highlights: • An overall picture of urban rail energy use is provided. • Performance indicators are developed for urban rail system energy optimisation. • A multi-level methodology for assessing energy efficiency measures is presented. - Abstract: Urban rail systems are facing increasing pressure to minimise their energy consumption and thusly reduce their operational costs and environmental impact. However, given the complexity of such systems, this can only be effectively achieved through a holistic approach which considers the numerous interdependences between subsystems (i.e. vehicles, operations and infrastructure). Such an approach requires a comprehensive set of energy consumption-related Key Performance Indicators (KEPIs) that enable: a multilevel analysis of the actual energy performance of the system; an assessment of potential energy saving strategies; and the monitoring of the results of implemented measures. This paper proposes an original, complete list of KEPIs developed through a scientific approach validated by different stakeholders. It consists of a hierarchical list of 22 indicators divided into two levels: 10 key performance indicators, to ascertain the performance of the whole system and complete subsystems; and 12 performance indicators, to evaluate the performance of single units within subsystems, for example, a single rail vehicle or station. Additionally, the paper gives a brief insight into urban rail energy usage by providing an adequate context in which to understand the proposed KEPIs, together with a methodology describing their application when optimising the energy consumption of urban rail systems

The diagnostic odds ratio: a single indicator of test performance

NARCIS (Netherlands)

Glas, Afina S.; Lijmer, Jeroen G.; Prins, Martin H.; Bonsel, Gouke J.; Bossuyt, Patrick M. M.

2003-01-01

Diagnostic testing can be used to discriminate subjects with a target disorder from subjects without it. Several indicators of diagnostic performance have been proposed, such as sensitivity and specificity. Using paired indicators can be a disadvantage in comparing the performance of competing

KEY PERFORMANCE INDICATORS DISCLOSURES BY THE INTEGRATED REPORTING

Directory of Open Access Journals (Sweden)

BOBITAN ROXANA-IOANA

2016-02-01

Full Text Available We are in a new era of corporate reporting where the corporate reporting landscape was changed. Institutional and small investors, financial analysts and other key stakeholders are demanding more information about long-term strategies and profitability of companies. Also, the increasing complexity of business models, growing awareness of climate change and resource scarcity and communication are expectations of the role of business in the 21st century and which the key of performance indicators (KPIs is. The companies must change the way these KPIs are being incorporated throughout the annual report and how these are linked to the company’s strategy and business model, their risks and risk mitigation, and their incentive schemes. Regarding this, integrated reporting, continue to gain momentum, the spotlight on the depth, breadth and quality of KPIs being reported will only strengthen. The aim of this discussion paper is to describe which are the most important key performance indicators in sprit of integrating reporting. A good and very known example for the integrated reporting is Philips Electronics, the Dutch healthcare and lighting company, a pioneer that embrace this concept, and the paper make an analysis of the most important key performance indicators.

Development of Corporate Governance Performance Indicators for Czech Manufacturing Companies

Directory of Open Access Journals (Sweden)

Pavláková Docekalová Marie

2015-03-01

Full Text Available Effective corporate governance is a key element in achieving long-term success for any company. The codes of conduct that corporate governance adopts directly determine the sustainability of business activities. With this in mind, this paper aims to demonstrate the results of research that identifies a set of key indicators of corporate governance performance. The presented research is quantitative. In order to identify key performance indicators, factor analysis was employed. It was found that corporate governance performance is influenced by two factors. For the first factor, the relationship between corporate governance and stakeholders is measured by key indicators: percentage of women within CG, contributions to political parties, politicians and related institutions and number of complaints received from stakeholders. The second factor, strategy & compliance, is generated from the following: percentage of strategic objectives met and total number of sanctions for breaching the law. This research aims to assist both academic and corporate practitioners who want to improve corporate governance performance and, through the use of key performance indicators, support the transparency and sustainability of their business.

Pengembangan Sistem Manajemen dan Analisis Key Performance Indicator “Smart Kpi” Berbasis Web

Directory of Open Access Journals (Sweden)

Meiliana Meiliana

2014-12-01

Full Text Available The goals of organization or company are achieved by the given objectives of all the employees. In order to measure the achievement of the employees, the organization or company can use Key Performance Indicator (KPI. However, most of the application of KPI is done manually, for example in inputting scores, result submission, score checking, and report creation. Seeing this condition, an application called “Smart KPI” is developed to provide an effective and efficient KPI System, to provide the valid KPI data to assist the monitoring of employees performance, and to create the organizational structure by relating the supervisor with the subordinate. This application is developed using Scrum research method that consists of backlog and sprint. The backlog consists of literature studies, comparing previous research or product, distributing questionnaires, and interviewing IT experts. Sprint consists of sprint and release planning and actual sprint work. The result is a PHP based web application for KPI processing for an organization or company that depends on the structure of users and indicators that have been set in the back-end and apply the settings and process the KPI in the front-end. The conclusion that obtained is this application will help the KPI processing which match the user requirement and has a good user interface and performance.

ISI PUBLICATIONS MANAGEMENT THROUGH PERFORMANCE INDICATORS

Directory of Open Access Journals (Sweden)

Victor VELTER

2010-09-01

Full Text Available The paper proposes to describe the ways in which the research management and administration department from a certain institution can interfere with specific policies in order to increase the visibility of scientific publications. Scientometric analysis is made on ISI publications of “Constantin Brancsi” University from Targu Jiu and wants to reveal performance indicators able to monitor the visibility of the papers indexed in ThomsonReuters ISI base.

The spin project: safety and performance indicators in different time frames

International Nuclear Information System (INIS)

Storck, R.; Becker, D.A.

2002-01-01

Safety and performance indicators have been under discussion for many years in several countries and international organisations. If those indicators refer to the long term safety of the total disposal system, they are often called safety indicators. If they refer to the performance of subsystems or the total system from a more technical point of view, they are sometimes called performance indicators. The need for indicators other than dose rates derives e.g. from the long time frames involved in safety assessments of waste disposal systems and the increasing uncertainty in dose rate calculations over time due to uncertainty in evolution of the surface environment and of behaviour of man. Before introducing additional indicators into a safety case of a potential repository site, the applicability and usefulness of different indicators have to be investigated and evaluated. The systematic analysis and testing of safety and performance indicators for use in different time horizons after closure of the disposal facility is the task of the SPIN project. This is done by re-calculating four recent studies concerning repository projects in granite formations. (authors)

Summary report on the use of plant safety performance indicators

International Nuclear Information System (INIS)

2001-09-01

In 1998, the OECD/NEA committee on Nuclear Regulatory Activities (CNRA) initiated an activity with the objective of advancing the discussion on how to enhance and measure regulatory effectiveness in relation to nuclear installations. One of the outcome of this activity was to establish a Task group to develop internal (direct) performance indicators which would be used to monitor regulatory efficiency. In parallel, a joint CNRA/CSNI group was launched in December 2000 to exchange information and develop external (indirect) indicators to measure regulatory effectiveness, i.e. impact on licensee's safety performance. These external indicators are, in other words, the traditional plant performance indicators (PI's) and these are the ones that this report deals with. This report presents the work performed by the joint CNRA/CSNI task group mentioned above. It provides a summary of the sets of PI's being used by different regulatory bodies and WANO, it describes the national practices on the use of PI's and proposes a set of PI's that could be used nationally describing regulatory effectiveness and also as a basis for an international system. The task force consisted of regulators, organisations which have a performance indicators system in operation or under testing. The task force met in Paris on February 19-20, 2001. Each participant provided a brief description of the PI System at his organisation and its usage. The group identified a list of PI's that are recommended to be used nationally by regulators. This paper has been elaborated based on the information exchanged and discussions held in the February meeting. The participating countries (Spain, Finland, US, Sweden) and WANO were asked to provide an overview of systems in use. The presently used Performance Indicators were reviewed in a three steps process. 1. First indicators used in at least two agencies were identified. 2. The second step was to identify the most used indicators. 3. The third step was to

Life Expectancies Applied to Specific Statuses: a History of the Indicators and the Methods of Calculation {Population, 3, 1998)

OpenAIRE

N. Brouard; J.-M. Robine; E. Cambois

1999-01-01

Cambois (Emmanuelle), Robin? (Jean-Marie), Brouard (Nicolas).- Life Expectancies Applied to Specific Statuses: A History of the Indicators and the Methods of Calculation Indicators of life expectancy applied to specific statuses, such as the state of health or professional status, were introduced at the end of the 1930s and are currently the object of renewed interest. Because they relate mortality to different domains (health, professional activity) applied life expectancies reflect simultan...

Quality Management and Key Performance Indicators in Oncologic Esophageal Surgery.

Science.gov (United States)

Gockel, Ines; Ahlbrand, Constantin Johannes; Arras, Michael; Schreiber, Elke Maria; Lang, Hauke

2015-12-01

Ranking systems and comparisons of quality and performance indicators will be of increasing relevance for complex "high-risk" procedures such as esophageal cancer surgery. The identification of evidence-based standards relevant for key performance indicators in esophageal surgery is essential for establishing monitoring systems and furthermore a requirement to enhance treatment quality. In the course of this review, we analyze the key performance indicators case volume, radicality of resection, and postoperative morbidity and mortality, leading to continuous quality improvement. Ranking systems established on this basis will gain increased relevance in highly complex procedures within the national and international comparison and furthermore improve the treatment of patients with esophageal carcinoma.

Risk-based safety performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Chakraborty, S.; Prohaska, G.; Flodin, Y.; Grint, G.; Habermacher, H.; Hallman, A.; Isasia, R.; Melendez, E.; Verduras, E.; Karsa, Z.; Khatib-Rahbar, M.; Koeberlein, K.; Schwaeger, C.; Matahri, N.; Moravcik, I.; Tkac, M.; Preston, J.

2003-01-01

In a Concerted Action (CA), sponsored by the European Commission within its 5th Framework Program, a consortium of eleven partners from eight countries has reviewed and evaluated the application of Safety Performance Indicators (SPIs), which - in combination with other tools - can be used to monitor and improve the safety of nuclear power plants. The project was aimed at identification of methods that can be used in a risk-informed regulatory system and environment, and to exploit PSA techniques for the development and use of meaningful additional/alternative SPIs. The CA included the review of existing indicator systems, and the collection of information on the experience from indicator systems by means of a specific questionnaire. One of the most important and challenging issues for nuclear plant owners and/or regulators is to recognize early signs of deterioration in safety performance, caused by influences from management, organization and safety culture (MOSC), before actual events and/or mishaps take place. Most of the existing SPIs as proposed by various organizations are considered as 'lagging' indicators, that is, they are expected to show an impact only when a downward trend has already started. Furthermore, most of the available indicators are at a relatively high level, such that they will not provide useful information on fundamental weaknesses causing the problem in the first place. Regulators' and utilities' views on the use of a Safety Performance Indicator System have also been a part of the development of the CA. (author)

PERFORMANCE INDICES TO DESIGN A MULTICOMPONENT BATCH DISTILLATION COLUMN USING A SHORTCUT METHOD

Directory of Open Access Journals (Sweden)

A. Narvaes-Garcia

2015-06-01

Full Text Available AbstractIn this paper, three quality or performance indices (Luyben's capacity factor, total annual costs, and annual profit were applied for the design of a batch distillation column working at variable reflux. This work used the Fenske-Underwood-Gilliland short-cut method to solve a problem of four components (benzene, toluene, ethyl-benzene, and ortho-xylene that needed to be separated and purified to a mole fraction of 0.97 or better. The performance of the system was evaluated using distillation columns with 10, 20, 30, 40 and 50 theoretical stages with a boil-up vapor flow set at 100 kmol/h. It was found that the annual profit was the best quality index, while the best case for variable reflux was the column with 50 stages. It was confirmed that the best case always required a reflux ratio close to the minimum.

Quantifying Averted Disability-Adjusted Life Years as a Performance Indicator for Water Quality Interventions: A Review of Current Methodologies and Challenges

Directory of Open Access Journals (Sweden)

Darcy M. Anderson

2018-06-01

Full Text Available Sustainable access to safe drinking water protects against infectious disease and promotes overall health. Despite considerable progress toward increasing water access, safe water quality and reliable service delivery remain a challenge. Traditional financing strategies pay implementers based on inputs and activities, with minimal incentives for water quality monitoring and sustained service operation. Pay-for-performance offers an alternative financing strategy that delivers all or a portion of payment based on performance indicators of desired outputs or outcomes. A pay-for-performance approach in the water sector could quantify and incentivize health impact. Averted disability-adjusted life years (ADALYs have been used as a performance indicator to measure the burden of disease averted due to environmental health interventions. Water-related disease burden can be measured for application as an ADALYs performance indicator following either comparative risk assessment or quantitative microbial risk assessment. Comparative risk assessment models disease burden using water source type as a proxy indicator of microbial water quality, while quantitative microbial risk assessment models disease burden using concentrations of indicator pathogens. This paper compares these risk assessment methodologies, and summarizes the limitations of applying these approaches toward quantifying ADALYs as a performance indicator for water quality interventions.

Energy Performance Indicators in the Swedish Building Procurement Process

Directory of Open Access Journals (Sweden)

Ingrid Allard

2017-10-01

Full Text Available In Sweden, all new buildings need to comply with the National Board of Housing, Building and Planning’s requirement on specific purchased energy (kWh/m2. Accordingly, this indicator is often used to set design criteria in the building procurement process. However, when energy use is measured in finished buildings, the measurements often deviate significantly from the design calculations. The measured specific purchased energy does not necessarily reflect the responsibility of the building contractor, as it is influenced by the building operation, user behavior and climate. Therefore, Swedish building practitioners may prefer other indicators for setting design criteria in the building procurement process. The aim of this study was twofold: (i to understand the Swedish building practitioners’ perspectives and opinions on seven building energy performance indicators (envelope air leakage, U-values for different building parts, average U-value, specific heat loss, heat loss coefficient, specific net energy, and specific purchased energy; and (ii to understand the consequences for the energy performance of multi-family buildings of using the studied indicators to set criteria in the procurement process. The study involved a Delphi approach and simulations of a multi-family case study building. The studied indicators were discussed in terms of how they may meet the needs of the building practitioners when used to set building energy performance criteria in the procurement process.

A road safety performance indicator for vehicle fleet compatibility.

NARCIS (Netherlands)

Christoph, M. Vis, M.A. Rackliff, L. & Stipdonk, H.

2013-01-01

This paper discusses the development and the application of a safety performance indicator which measures the intrinsic safety of a country's vehicle fleet related to fleet composition. The indicator takes into account both the ‘relative severity’ of individual collisions between different vehicle

Financial Indicators of Performance Measurement: Reality, Relevance and Distortion

Directory of Open Access Journals (Sweden)

Flavius-Andrei Guinea

2016-01-01

Full Text Available The main criticism brought to managers and to managerial accounting systems was the lack of emphasis on the return of the use of invested capital and the excessive focus on the efficiency of production processes. This fact forced the transition to a new view on the way of establishing the strategic objectives measured by financial indicators. The aim of this paper is to demonstrate, through case studies, the relevance and possibilities of manipulation of a series of indicators used for assessing performance: return on investment, residual profit, economic added value, commercial profitability. The relativity and the criticized appraisal of performance only through the means of profit were thought to be solved by implementing other indicators that would link several ingredients of profitability. The conclusions highlight that the remedy promoted by the new sets of financial indicators imposes a considerable cost, represented by the temptation of information distortion.

Pursuing Quality Evidence: Applying Single-Subject Quality Indicators to Non-Experimental Qualitative Educational Research

Science.gov (United States)

Stodden, Robert A.; Yamamoto, Kathryn K.; Folk, Eric; Kong, Eran; Otsuji, Derek N.

2013-01-01

The need for quality evidence in support of strategies used while working with persons with autism and intellectual disability (ID) has been long been recognized by researchers and practitioners. The authors reviewed and applied a number of evidence-based indicators, developed through the "What Works Clearinghouse" (WWC), to the conduct…

Regulatory supervision of safety indicators; experience with radiation safety indicators in Dukovany nuclear power plant performance

International Nuclear Information System (INIS)

Urbancik, L.; Kulich, V.

2004-01-01

The State Office for Nuclear Safety uses three sets of indicators describing the following aspects of a favourable nuclear power plant operation: smooth operation in normal circumstances, low risk to the population, and operation with a positive safety attitude. These are three safety-related areas for assessment. Each area has its own set of indicators. Overall operational safety performance indicators were identified for each attribute. From this point, a level of strategic indicators was developed, and finally, a set of specific indicators was set up. While neither the overall indicators nor the strategic indicators are directly measurable, the specific indicators are directly measurable and are targeted during inspection. (author)

Development of key performance indicators for prehospital emergency care.

Science.gov (United States)

Murphy, Adrian; Wakai, Abel; Walsh, Cathal; Cummins, Fergal; O'Sullivan, Ronan

2016-04-01

Key performance indicators (KPIs) are used to monitor and evaluate critical areas of clinical and support functions that influence patient outcome. Traditional prehospital emergency care performance monitoring has focused solely on response time metrics. The landscape of emergency care delivery in Ireland is in the process of significant national reconfiguration. The development of KPIs is therefore considered one of the key priorities in prehospital research. The aim of this study was to develop a suite of KPIs for prehospital emergency care in Ireland. A systematic literature review of prehospital care performance measurement was undertaken followed by a three-round Delphi consensus process facilitated by a broad-based multidisciplinary group of panellists. The consensus process was conducted between June 2012 and October 2013. Each candidate indicator on the Delphi survey questionnaire was rated using a 5-point Likert-type rating scale. Agreement was defined as at least 70% of responders rating an indicator as 'agree' or 'strongly agree' on the rating scale. Data were analysed using descriptive statistics. Sensitivity of the ratings was examined for robustness by bootstrapping the original sample. Of the 78 citations identified by the systematic review, 5 relevant publications were used to select candidate indicators for the Delphi round 1 questionnaire. Response rates in Delphi rounds 1 and 2 were 89% and 83%, respectively. Following the consensus development conference, 101 KPIs reached consensus. Based on the Donabedian framework for quality-of-care indicators, 7 of the KPIs which reached agreement were structure KPIs, 74 were process KPIs and 20 were outcome KPIs. The highest ranked indicator was a process KPI ('Direct transport of ST-elevation myocardial infarction patients to a primary percutaneous intervention (PCI)-capable facility for ECG to PCI time performance measurement using scientifically valid and reliable KPIs. Employing a Delphi panel of key

Performance indicators for online secondary education: a case study

NARCIS (Netherlands)

van Diepen, P.; Bredeweg, B.; Bosse, T.; Bredeweg, B.

2017-01-01

There is little consensus about what variables extracted from learner data are the most reliable indicators of learning performance. The aim of this study is to determine such indicators by taking a wide range of variables into consideration concerning overall learning activity and content

What is the value of performance indicators for the nuclear industry?

International Nuclear Information System (INIS)

Johann Popp

2006-01-01

WANO is an Association of all Operators of Nuclear Power Plants worldwide. This association is promoting and running for their members 4 programmes which are Operating Experience, Peer Reviews, Professional and Technical Development and Technical Support and Exchange. The Technical Support and Exchange programme comprises Good Practices, Performance Indicators, Operator-to-Operator Exchanges and Technical Support Missions. This paper explains the Performance Indicator programme. WANO is collecting significant NPP nuclear power plant data and is computing indicators according to selected criteria for the only purpose of comparing or benchmarking plant performance of all types and different designs. All effective organisations measure their performance in order to know, how well they are doing and in order to identify opportunities for improvement. Indicators are central to the monitoring and reporting of progress towards sustainable development in all areas. Indicators are mainly derived from statistical data in order to exhibit weaknesses and strengths of programs. There are many hundreds of commercial and technical indicators known. WANO is tracing just ten significant indicators out of the many available, and only for the purpose of comparing plant performance. The first set of three indicators is more related to productivity and exhibit, how well management is planning, staff is maintaining and operators are conducting the plants. The second set of two indicators is related to safety systems, how well they are maintained and how reliable they are. The next set of two is material related and the last two indicators are related to human resources. Indicators are reflecting the current industrial standard and allow the positioning of a plant with regard to the 'state of the art'. They pinpoint to weaknesses and strengths of different designs/fleets

Comparison of Turkey and United States in terms of teacher performance indicators

Directory of Open Access Journals (Sweden)

Zühal Çubukçu

2017-12-01

Full Text Available Developing objective standards and indicators, and establishing the transparency of the evaluation process have significant importance in reducing negative teacher opinions and ensuring healthy functioning of the performance evaluation system. The purpose of this study is to compare teacher performance indicators in Turkey and United States. This study was conducted using document review, which is one of the qualitative research methods. In the study, document review was used as the data collection method. In the first stage, the official documents of the two countries were accessed via websites. The authenticity of the obtained documents was checked. Finally, the analysis was done with the classification form developed by the researchers. In the study, the analysis of the documents was done by descriptive analysis technique. General Proficiencies of Teaching Profession consist of 233 performance indicator and Core Teaching Standards consist of 74 performance indicators. The findings of the study were examined under five themes determined by considering the General Proficiencies of Teaching Profession and Core Teaching Standards: Student and learning, content knowledge, instructional practice, assessment and professional development. General Proficiencies of Teaching Profession lists the knowledge, skills, and behaviors expected from teachers as performance indicators. In Core Teaching Standards, the performance indicators provide suggestions and explanations for the development of teaching in accordance with the requirements of today's world. the preparation of performance indicators to provide teachers' development and the realistic use of these indicators in evaluating will help improve the quality of teacher performance evaluation.

Analyzing key performance indicators of e-commerce using balanced scorecard

Directory of Open Access Journals (Sweden)

Seyed Kamal Chaharsooghi

2016-02-01

Full Text Available E-commerce as one of the most significant aspects of innovation in business processes is what takes place in companies across the world. The gap between information and communications technology and e-business application is called the digital divide. It is necessary to understand the reasons for the failure of commercial sites. Here the objective is to assess the commercial sites of Iran. Different methods are adopted to evaluate sites and electronic stores. The balanced scorecard is a rarely adopted method of concern to evaluate these sites in Iran. The survey methodology and Delphi technique are applied in building the research tools, which led to the development of a questionnaire. Through applying the BSC approach, the numbers of indicators in each of the four perspectives of BSC were identified. The DEMATEL technique is applied to determine the importance of different perspectives and to identify the causal correlations among the four perspectives. The results generated by SMART PLS graphics, the Structural Equation Modeling software, confirm the adequacy of this proposed model for websites. The findings here indicate that the growth and learning perspective have the greatest impact on the other perspectives while the other perspectives mostly affect the financial perspective.

Impacts of Integrated Marketing Communication Strategies Applied for Geographical Indications on Purchasing Behavior

OpenAIRE

Kırgız, Ayça

2017-01-01

The purpose of this study is to raise the awarenessfor products with geographical indication (GI) which directly influence thedevelopment of local and nation-wide economies, marketing of tourism activitiesand branding of destination and to investigate the integrated marketing communication(IMC) tools applied for realization of selling and the impact of such tools onshopping behavior. In this study, simple linear regression analysis have beenused. The data analysis showed that the perceived qu...

Using Performance Indicators to Promote Sustainable Transport in Japan

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Fukuda, Daisuke; Cornet, Yannick

literature on performance measurement. The information of Japanese cases is obtained by review of key policy documents, reports and academic papers and through a series of semi-structured interviews with experts and officials in Japan. The paper combines insights from two ongoing research projects supported......The challenges associated with using performance measurement to steer transport policy towards sustainability include general aspects of measuring sustainability of transport systems with indicators as well as specific national and institutional conditions for adopting and responding...... to the information produced by such sustainability indicator systems. Japan is interesting in these regards, since the country has adopted strategies for achieving a more sustainable transport situation, as well as frameworks of policy performance measurement and management. The paper will describe a general...

Analysis of academic performance management indicators of IFES

Directory of Open Access Journals (Sweden)

Fátima de Souza Freire

2008-07-01

self interest with their own training, as measured by their success ratio and greater dedication to their under graduate course. In the same direction there has been found a favourable effect of the number of students-workers ratio. Nevertheless, no positive effect of the costs per student ratio has been detected as expected, considering the desirable positive influence of such indicator in the quality of education. Key-words: Performance Indicators, Enade, IFES.

Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet

Science.gov (United States)

Antolick, Lance J.; Branning, Jeremy S.; Wade, Daniel R.; Dempsey, Paula J.

2010-01-01

The U.S. Army is currently expanding its fleet of Health Usage Monitoring Systems (HUMS) equipped aircraft at significant rates, to now include over 1,000 rotorcraft. Two different on-board HUMS, the Honeywell Modern Signal Processing Unit (MSPU) and the Goodrich Integrated Vehicle Health Management System (IVHMS), are collecting vibration health data on aircraft that include the Apache, Blackhawk, Chinook, and Kiowa Warrior. The objective of this paper is to recommend the most effective gear condition indicators for fleet use based on both a theoretical foundation and field data. Gear diagnostics with better performance will be recommended based on both a theoretical foundation and results of in-fleet use. In order to evaluate the gear condition indicator performance on rotorcraft fleets, results of more than five years of health monitoring for gear faults in the entire HUMS equipped Army helicopter fleet will be presented. More than ten examples of gear faults indicated by the gear CI have been compiled and each reviewed for accuracy. False alarms indications will also be discussed. Performance data from test rigs and seeded fault tests will also be presented. The results of the fleet analysis will be discussed, and a performance metric assigned to each of the competing algorithms. Gear fault diagnostic algorithms that are compliant with ADS-79A will be recommended for future use and development. The performance of gear algorithms used in the commercial units and the effectiveness of the gear CI as a fault identifier will be assessed using the criteria outlined in the standards in ADS-79A-HDBK, an Army handbook that outlines the conversion from Reliability Centered Maintenance to the On-Condition status of Condition Based Maintenance.

Indicators for Research Performance in the Humanities? The Scholars’ View on Research Quality and Indicators

Energy Technology Data Exchange (ETDEWEB)

Ochsner, M.; Hug, S.E.

2016-07-01

In this paper, we present indicators for research quality in the humanities collected in our previous work (Ochsner, Hug, & Daniel, 2012). We focus on how these indicators are accepted by humanities scholars. We also investigate differences between different subgroups of the humanities scholars we surveyed with regard to their preferences for such indicators. We address the theme of the conference (‘peripheries frontiers and beyond’) regarding two notions of (scientometric) periphery: First, we investigate indicators for research quality in the humanities, a field where there is a lack on knowledge on how to assess or even measure research quality, in fact, there is a quite broad consensus that (evaluative) bibliometrics cannot be readily applied in the humanities (Hicks, 2004; Nederhof, 2006). Second, we fully cover three humanities disciplines at Swiss universities and member universities of the League of European Research Universities (LERU). Scholars are a neglected stakeholder when it comes to the design of research assessment procedures or the selection of research indicators. However, they are directly affected, they know best what research quality in their field is and what impact the use of certain indicators could have on their research practices. The paper is structured as follows: first, we present the background for selecting indicators for research quality. This is followed by a description of our analysis methods and the presentation of the results. We finally discuss the results with regard to their use in research evaluation. (Author)

Influence of stress and recovery on endurance performance indicators

NARCIS (Netherlands)

Otter, Ruby; Brink, Michel; Lemmink, Koen

2016-01-01

Endurance athletes seek for the optimal balance in stress and recovery so that they can perform at their best. However, it is still largely unknown how psychosocial stress and recovery influence performance indicators of endurance athletes. Therefore, the aim of the study was to investigate how

THE RELEVANCE OF THE PERFORMANCE INDICATORS IN ECONOMIC AND FINANCIAL DIAGNOSIS

Directory of Open Access Journals (Sweden)

MIRELA MONEA

2011-01-01

Full Text Available Each company must achieve the objectives to reach performance in order to survive on the market. The paper aims to present the concept of performance as is seen in economic literature, to discuss the relevance of the main performances indicators on economic and financial diagnosis, to answer the question what are the main indicators which reflect economic or financial performances: profit, profitability ratios, economic added value, investments return, liquidity, cash-flows, resources efficiency, productivity, others.

Facilities Performance Indicators Report 2013-14: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2015

2015-01-01

This paper features an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA: Association of Higher Education Facilities Officers (APPA's) Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. "The Facilities Performance…

Performance and Stability Enhancement of Perovskite-Type Nanomaterials Applied for Carbon Capture Utilizing Oxyfuel Combustion

Directory of Open Access Journals (Sweden)

Qiuwan Shen

2017-02-01

Full Text Available A new series of Ba-Co-Operovskite-type oxygen carriers has been successfully synthesized by the microwave-assisted sol-gel method and further applied for producing an O2/CO2 mixture gas. The oxygen adsorption/desorption performance of synthesized samples was studied in a fixed-bed reactor system. Effects of A/B-site substitution on the oxygen desorption performance of Ba-Co-O–based perovskites are also included. Furthermore, the effects of operating conditions including the adsorption time and temperature as well as the desorption temperature on oxygen production performance were investigated in detail. The results indicated that BaCoO3-δ exhibited an excellent oxygen desorption performance among the synthesized A/B-site–substituted ACoO3-δ and BaBO3-δ samples, and that the optimal adsorption time, adsorption temperature and desorption temperatureforBaCoO3-δ were determined to be 20min, 850◦Cand850◦C, respectively, in this study.

Stakeholder driven indicators for eHealth performance management.

Science.gov (United States)

Vedlūga, Tomas; Mikulskienė, Birutė

2017-08-01

The goal of the present article is to compile a corpus of indicators of eHealth development evaluation that would essentially reflect stakeholder approaches and complement technical indicators of assessment of an eHealth system. Consequently, the assessment of the development of an eHealth system would reflect stakeholder approaches and become an innovative solution in attempting to improve productivity of IT projects in the field of health care. The compiled minimum set of indicators will be designed to monitor implementation of the national eHealth information system. To ensure reliability of the quality research, the respondents were grouped in accordance to the geographical distribution and diversity of the levels and types of the represented jobs and institutions. The applied analysis implies several managerial insights on the hierarchy of eHealth indicators. These insights may be helpful in recommending priority activities in implementation of an eHealth data system on the national or international level. The research is practically useful as it is the first to deal with the topic in Lithuania and its theoretical and practical aspect are particularly relevant in implementation of an eHealth data system in Lithuania. The eHealth assessment indicators presented in the article may be practically useful in two aspects: (1) as key implementation guidelines facilitating the general course of eHealth system development and (2) as a means to evaluate eHealth outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of methods of key performance indicators formation for corporate planning

International Nuclear Information System (INIS)

Chebotarev, A.N.

2011-01-01

A theoretical proposition, a model of enterprise performance management and a concept of balanced key performance indicators as a method to control the enterprise strategy have been systematized and presented. An algorithm that increases the efficiency of action plans' formation has been developed and implemented. In particular, a set of criteria for the selection of events and parameters necessary for the formation of an action plan has been created. A method of control of the business processes, allowing the experts to establish the relationship between the business processes performance indicators and the enterprise's key indicators has been developed [ru

Key performance indicators to benchmark hospital information systems - a delphi study.

Science.gov (United States)

Hübner-Bloder, G; Ammenwerth, E

2009-01-01

To identify the key performance indicators for hospital information systems (HIS) that can be used for HIS benchmarking. A Delphi survey with one qualitative and two quantitative rounds. Forty-four HIS experts from health care IT practice and academia participated in all three rounds. Seventy-seven performance indicators were identified and organized into eight categories: technical quality, software quality, architecture and interface quality, IT vendor quality, IT support and IT department quality, workflow support quality, IT outcome quality, and IT costs. The highest ranked indicators are related to clinical workflow support and user satisfaction. Isolated technical indicators or cost indicators were not seen as useful. The experts favored an interdisciplinary group of all the stakeholders, led by hospital management, to conduct the HIS benchmarking. They proposed benchmarking activities both in regular (annual) intervals as well as at defined events (for example after IT introduction). Most of the experts stated that in their institutions no HIS benchmarking activities are being performed at the moment. In the context of IT governance, IT benchmarking is gaining importance in the healthcare area. The found indicators reflect the view of health care IT professionals and researchers. Research is needed to further validate and operationalize key performance indicators, to provide an IT benchmarking framework, and to provide open repositories for a comparison of the HIS benchmarks of different hospitals.

Technology and Innovation Management Indicators and Assessment Based on Government Performance

Directory of Open Access Journals (Sweden)

Sanja Marinković

2016-05-01

Full Text Available Throughout large global databases, such as OECD, UNDP, ITU, Eurostat, World Bank, and Statistical offices of countries, there are many indicators that refer to Technology and Innovation Management (TIM performance of countries. However, a question arises of how to classify and systematically analyze these indicators in terms of measuring, monitoring and enhancing TIM performance at a national level. More specifically, in this paper we pose a question of how to assess the government performance in TIM, as one aspect of the Triple Helix model. Therefore, we use a model of thirty-nine indicators which are classified according to three main management functions: planning, organizing and control, observed as input, process and output, respectively. More importantly, we analyze the relations that exist between these three categories of indicators. Planning indicators are observed as the investments in technological and innovative activities; organizing indicators include the infrastructure, public administration efficiency and cooperation support, while control indicators refer to the national economy R&D, transfer effects and entrepreneurship outcomes. The model is tested for assessing and comparing government performance in TIM for three countries: Serbia, Croatia and Slovenia, for the time period 2007-2012. Finally, as a feedback in the model, we used scores of the countries according to the Global Innovation Index and the Global Competitiveness Index, to verify the results and provide the final conclusion.

Performance indicators of bioethanol distillation

International Nuclear Information System (INIS)

Marriaga, Nilson

2009-01-01

The increase of biofuels demand accelerates the construction of new production plants and technological improvements in the process so the development of versatile tools for evaluating alternatives becomes an undeniable challenge. It was established through heuristic rules, thermodynamic analysis and simulation computer the energy consumption and performance indicators that govern, from fermented mash (ethanol 8.5 % v/v), the distillation of various capacities for bioethanol production: 20, 60, 100 and 150 KLD (kiloliters / day) through Aspen PlusTM simulator. It was found that the distillation demand nearly 30% of heat that would be obtained by burning alcohol fuel produced thus it is necessary the use of raw materials that generate enough biomass to produce the steam required. In addition, correlations were found to allow for easy diameters of distillation columns in terms of production capacity.

RULES FOR SELECTING AND USING KEY PERFORMANCE INDICATORS FOR THE SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

Alexandra - Elena RUSĂNEANU

2014-06-01

Full Text Available There is no question that performance is the desired result of every activity or action. In order to correctly measure an organization’s performance it is necessary to select key performance indicators (KPIs that will deliver long-term value to the company. KPIs are presenting performance information for all levels of the organization and they are reflecting the progress made so far to achieve strategic objectives. The selection of the key performance indicators must be made according to the organization’s industry and activity. The company must truly understand its business and its mission. Also, KPIs must be closely linked to the strategic objectives. The focus of this research is to present effective rules for defining key performance indicators for the Service industry. This sector of economy consists in generating intangible goods like experience, expertise and information. Therefore, monitoring this type of services requires a different approach when defining performance indicators compared to the manufacturing industry.

Performance indicators and decision making for outsourcing public health laboratory services.

Science.gov (United States)

Santos, Maria Angelica Borges dos; Moraes, Ricardo Montes de; Passos, Sonia Regina Lambert

2012-06-01

To develop performance indicators for outsourcing clinical laboratory services, based on information systems and public administrative records. In the municipality of Rio de Janeiro, Southern Brazil, the public health laboratory network comprised 33 laboratories with automated equipment (but no integrated information system), 90 primary care units (where sample collection was performed) and 983 employees. Information records were obtained from the administrative records of the Budget Information System for Public Health and the Outpatient and Hospital Information System of the Unified Health System. Performance indicators (production, productivity, usage and costs) were generated from data collected routinely from 2006 to 2008. The variations in production, costs and unit prices for tests were analyzed by Laspeyres and Paasche indices, which specifically measure laboratory activity, and by the Consumer Price Index from the Brazilian Institute of Geography and Statistics. A total of 10,359,111 tests were performed in 2008 (10.6% increase over 2006), and the test/employee ratio grew by 8.6%. The costs of supplies, wages and providers increased by 2.3%, 45.4% and 18.3%, respectively. The laboratory tests per visit and hospitalizations increased by 10% and 20%, respectively. The direct costs totaled R$ 63.2 million in 2008, representing an increase of 22.2% in current values during the period analyzed. The direct costs deflated by the Brazilian National Consumer Price Index (9.5% for the period) showed an 11.6% increase in production volumes. The activity-specific volume index, which considers changes in the mix of tests, showed increases of 18.5% in the test price and 3.1% in the production volume. The performance indicators, particularly the specific indices for volume and price of activity, constitute a baseline of performance potential for monitoring private laboratories and contractors. The economic performance indicators demonstrated the need for network

Selecting Environmental Performance Indicators : The Case of Numico

NARCIS (Netherlands)

Scherpereel, C.; Koppen, van C.S.A.; Heering, G.B.F.

2001-01-01

In order to achieve both efficient and reliable external communication adapted to the company's specific conditions, it is desirable to establish a clear relation between the environmental performance indicators (EPIs) used internally for environmental management and the EPIs used externally for

The environmental performance indicators in the sector of tourist services. The case of study about an international hotel group

International Nuclear Information System (INIS)

Andriola, L.; Seminara, M.V.

2000-01-01

The environmental performance indicators in the tourism sector represents the necessary element to quantify and to simplify information about the environmental performance of a particular field in order to make the comprehension of the interactions between tourist activities and environment understood by the customers and decision makers. This indicators will have to be quantified in order to contribute to focus and explain improvements in environmental management. One of the most important elements to pursue a Sustainable Development is the definition of a series of the right indicators. Basically performance indicators can be applied in the environmental analyses effected for defining the politics of management of tourist development and, particularly, in the procedures of Environmental Impact Assessment and Strategic Environmental Assessment disciplined by the European Directives 85/337/CEE, 97/11/CEE, from the proposal of Directive on the SEA and from the relative national normative. This tools should allow to esteem environmental conditions and the impacts caused by the tourist activities to find actions to balance the budget between the economic development and the social and environmental issues i a determined territorial context [it

Game Indicators Determining Sports Performance in the NBA

OpenAIRE

Miko?ajec, Kazimierz; Maszczyk, Adam; Zaj?c, Tomasz

2013-01-01

The main goal of the present study was to identify basketball game performance indicators which best determine sports level in the National Basketball Association (NBA) league. The research material consisted of all NBA game statistics at the turn of eight seasons (2003?11) and included 52 performance variables. Through detailed analysis the variables with high influence on game effectiveness were selected for final procedures. It has been proven that a limited number of factors, mostly offen...

Key performance indicators in British military trauma.

Science.gov (United States)

Stannard, Adam; Tai, Nigel R; Bowley, Douglas M; Midwinter, Mark; Hodgetts, Tim J

2008-08-01

Key performance indicators (KPI) are tools for assessing process and outcome in systems of health care provision and are an essential component in performance improvement. Although KPI have been used in British military trauma for 10 years, they remain poorly defined and are derived from civilian metrics that do not adjust for the realities of field trauma care. Our aim was to modify current trauma KPI to ensure they more faithfully reflect both the military setting and contemporary evidence in order to both aid accurate calibration of the performance of the British Defence Medical Services and act as a driver for performance improvement. A workshop was convened that was attended by senior, experienced doctors and nurses from all disciplines of trauma care in the British military. "Speciality-specific" KPI were developed by interest groups using evidence-based data where available and collective experience where this was lacking. In a final discussion these were streamlined into 60 KPI covering each phase of trauma management. The introduction of these KPI sets a number of important benchmarks by which British military trauma can be measured. As part of a performance improvement programme, these will allow closer monitoring of our performance and assist efforts to develop, train, and resource British military trauma providers.

Performance indices and evaluation of algorithms in building energy efficient design optimization

International Nuclear Information System (INIS)

Si, Binghui; Tian, Zhichao; Jin, Xing; Zhou, Xin; Tang, Peng; Shi, Xing

2016-01-01

Building energy efficient design optimization is an emerging technique that is increasingly being used to design buildings with better overall performance and a particular emphasis on energy efficiency. To achieve building energy efficient design optimization, algorithms are vital to generate new designs and thus drive the design optimization process. Therefore, the performance of algorithms is crucial to achieving effective energy efficient design techniques. This study evaluates algorithms used for building energy efficient design optimization. A set of performance indices, namely, stability, robustness, validity, speed, coverage, and locality, is proposed to evaluate the overall performance of algorithms. A benchmark building and a design optimization problem are also developed. Hooke–Jeeves algorithm, Multi-Objective Genetic Algorithm II, and Multi-Objective Particle Swarm Optimization algorithm are evaluated by using the proposed performance indices and benchmark design problem. Results indicate that no algorithm performs best in all six areas. Therefore, when facing an energy efficient design problem, the algorithm must be carefully selected based on the nature of the problem and the performance indices that matter the most. - Highlights: • Six indices of algorithm performance in building energy optimization are developed. • For each index, its concept is defined and the calculation formulas are proposed. • A benchmark building and benchmark energy efficient design problem are proposed. • The performance of three selected algorithms are evaluated.

System of performance indicators for management of a hydroelectric power plant; Rede de indicadores de desempenho para gestao de uma usina hidreletrica

Energy Technology Data Exchange (ETDEWEB)

Bandeira, Anselmo Alves

1997-07-01

This thesis addresses the development of a management system for manufacturing, based upon a performance measurement system, applied to a case study of the strategy of an electric energy-producing company. By defining performance parameters, determining the critical success factors and applying a gaps analysis, it is possible to identify the areas where the company ought to channel its efforts to improve its productive performance. The thesis selects indicators associated with the following parameters of efficacy, efficiency, productivity, quality, innovation and profitability, in order to evaluate the performance of its different levels of operation. A practical application of a performance measurement system, which was undertaken during the period of observation, is presented at the end of this thesis. It is believed that the theoretical content of this thesis can be easily adapted to the situation of other companies. (author)

Universal coverage with insecticide-treated nets - applying the revised indicators for ownership and use to the Nigeria 2010 malaria indicator survey data.

Science.gov (United States)

Kilian, Albert; Koenker, Hannah; Baba, Ebenezer; Onyefunafoa, Emmanuel O; Selby, Richmond A; Lokko, Kojo; Lynch, Matthew

2013-09-10

Until recently only two indicators were used to evaluate malaria prevention with insecticide-treated nets (ITN): "proportion of households with any ITN" and "proportion of the population using an ITN last night". This study explores the potential of the expanded set of indicators recommended by the Roll Back Malaria Monitoring and Evaluation Reference Group (MERG) for comprehensive analysis of universal coverage with ITN by applying them to the Nigeria 2010 Malaria Indicator Survey data. The two additional indicators of "proportion of households with at least one ITN for every two people" and "proportion of population with access to an ITN within the household" were calculated as recommended by MERG. Based on the estimates for each of the four ITN indicators three gaps were calculated: i) households with no ITN, ii) households with any but not enough ITN, iii) population with access to ITN not using it. In addition, coverage with at least one ITN at community level was explored by applying Lot Quality Assurance Sampling (LQAS) decision rules to the cluster level of the data. All outcomes were analysed by household background characteristics and whether an ITN campaign had recently been done. While the proportion of households with any ITN was only 42% overall, it was 75% in areas with a recent mass campaign and in these areas 66% of communities had coverage of 80% or better. However, the campaigns left a considerable intra-household ownership gap with 66% of households with any ITN not having enough for every family member. In contrast, the analysis comparing actual against potential use showed that ITN utilization was good overall with only 19% of people with access not using the ITN, but with a significant difference between the North, where use was excellent (use gap 11%), and the South (use gap 36%) indicating the need for enhanced behaviour change communication. The expanded ITN indicators to assess universal coverage provide strong tools for a comprehensive

Facilities Performance Indicators Report 2011-12: Tracking Your Facilities Vital Signs

Science.gov (United States)

APPA: Association of Higher Education Facilities Officers, 2013

2013-01-01

This paper provides an expanded Web-based "Facilities Performance Indicators (FPI) Report." The purpose of APPA's Facilities Performance Indicators is to provide a representative set of statistics about facilities in educational institutions. APPA's Information and Research Committee's goal for this year was to enhance the…

Longitudinal Trend Analysis of Performance Indicators for South Carolina's Technical Colleges

Science.gov (United States)

Hossain, Mohammad Nurul

2010-01-01

This study included an analysis of the trend of performance indicators for the technical college sector of higher education in South Carolina. In response to demands for accountability and transparency in higher education, the state of South Carolina developed sector specific performance indicators to measure various educational outcomes for each…

Sustainability of the Tourism Industry, Based on Financial Key Performance Indicators

Directory of Open Access Journals (Sweden)

Adriana Dutescu

2014-11-01

Full Text Available Even if there is a real need of a set of key performance indicators for small and medium sized enterprises, this is not yet considered to be satisfied. Our research is focused on two main aspects, each of them individually important for the users of accounting information: the basic indicators specific for analysing operational performance and for decision making and the trend of the key performance indicators in the context of the economic crisis. The starting point of the study is a questionnaire addressed to small and medium sized enterprises activating in the tourism area, especially in the hotel industry. The respondents answered the questions in perfect anonymity by choosing one of the multiple choices for some of them and offering open answers to the others. Our analysis reveals a fair view of the dynamic of the most used key performance indicators in Romanian hotel industry, the limits of their interpretation and usage and the evolution of the financial and economic performance. The declared purpose of the research is to set the bases of a starting point in order to provide solutions for improving the relevance and the usage of these indicators in this domain, in the context of a sustainable business, taking into account the nowadays status of the economy in general and in particular the hotel industry.

Using performance indicators to reduce cost uncertainty of China's CO2 mitigation goals

International Nuclear Information System (INIS)

Xu, Yuan

2013-01-01

Goals on absolute emissions and intensity play key roles in CO 2 mitigation. However, like cap-and-trade policies with price uncertainty, they suffer from significant uncertainty in abatement costs. This article examines whether an indicator could be established to complement CO 2 mitigation goals and help reduce cost uncertainty with a particular focus on China. Performance indicators on CO 2 emissions per unit of energy consumption could satisfy three criteria: compared with the mitigation goals, (i) they are more closely associated with active mitigation efforts and (ii) their baselines have more stable projections from historical trajectories. (iii) Their abatement costs are generally higher than other mitigation methods, particularly energy efficiency and conservation. Performance indicators could be used in the following way: if a CO 2 goal on absolute emissions or intensity is attained, the performance indicator should still reach a lower threshold as a cost floor. If the goal cannot be attained, an upper performance threshold should be achieved as a cost ceiling. The narrower cost uncertainty may encourage wider and greater mitigation efforts. - Highlights: ► CO 2 emissions per unit of energy consumption could act as performance indicators. ► Performance indicators are more closely related to active mitigation activities. ► Performance indicators have more stable historical trajectories. ► Abatement costs are higher for performance indicators than for other activities. ► Performance thresholds could reduce the cost uncertainty of CO 2 mitigation goals.

Performance indicators related to points scoring and winning in international rugby sevens.

Science.gov (United States)

Higham, Dean G; Hopkins, Will G; Pyne, David B; Anson, Judith M

2014-05-01

Identification of performance indicators related to scoring points and winning is needed to inform tactical approaches to international rugby sevens competition. The aim of this study was to characterize team performance indicators in international rugby sevens and quantify their relationship with a team's points scored and probability of winning. Performance indicators of each team during 196 matches of the 2011/2012 International Rugby Board Sevens World Series were modeled for their linear relationships with points scored and likelihood of winning within (changes in team values from match to match) and between (differences between team values averaged over all matches) teams. Relationships were evaluated as the change and difference in points and probability of winning associated with a two within- and between-team standard deviations increase in performance indicator values. Inferences about relationships were assessed using a smallest meaningful difference of one point and a 10% probability of a team changing the outcome of a close match. All indicators exhibited high within-team match-to-match variability (intraclass correlation coefficients ranged from 0.00 to 0.23). Excluding indicators representing points-scoring actions or events occurring on average less than once per match, 13 of 17 indicators had substantial clear within-team relationships with points scored and/or likelihood of victory. Relationships between teams were generally similar in magnitude but unclear. Tactics that increase points scoring and likelihood of winning should be based on greater ball possession, fewer rucks, mauls, turnovers, penalties and free kicks, and limited passing. Key pointsSuccessful international rugby sevens teams tend to maintain ball possession; more frequently avoid taking the ball into contact; concede fewer turnovers, penalties and free kicks; retain possession in scrums, rucks and mauls; and limit passing the ball.Selected performance indicators may be used to

Growth Performance, Haematological Indices and Cost Benefits of ...

African Journals Online (AJOL)

Lenovo pc

Effect of replacing dietary maize with cassava peel meal (CPM) supplemented with Allzyme® SSF (SSF) on the growth performance, haematological indices and cost benefits of growing pigs was investigated. Chemical composition of CPM and diets used were determined using standard procedures. Twenty-four growing ...

ALARA tools and performance indicators at Cernavoda NPP

International Nuclear Information System (INIS)

Chitu, C.; Popescu, V.; Simionov, V.

2009-01-01

Work efficiency is an area of high concern to nuclear power plant operators. Job planning has to be done so that there will be enough time for ALARA actions to be implemented. The control of the activities involving radiological risk is part of ALARA Process. An effective control supposes the implementation of a process to systematically identify the activities performed in radiological areas. Plant Performance Indicators related to ionizing radiation exposure have been established to improve station safe performance. They are assessed and reported periodically to reflect the safe operation objectives. If target values are exceeded 'abnormal condition reports' are generated. Corrective and preventive actions aim at work planning, technical aspects, and human performance. All the staff is informed about these events and corrective actions described through the training program are implemented. (authors)

Ratios performance indicator evaluation of selected engineering enterprises in the northeast cohesion region

OpenAIRE

Šenec, Alexandr

2014-01-01

The paper deals with the performance indicator evaluation of selected industrial companies with a predominance of engineering production. Ratio indicators were used in order to measure business performance per unit of fixed assets and per employee. Analyzed data were obtained from companies annual reports. Trends ratio indicators were intended with the help of mathematical and statistical methods. These ratios indicator assessing the level of performance, value added and operating profit p...

Key performance indicators for electric mining shovels and oil sands diggability

Science.gov (United States)

Patnayak, Sibabrata

A shovel performance monitoring study was undertaken in two oil sands mines operated by Syncrude Canada Ltd. using performance data obtained from P&H 4100 TS and BOSS electric mining shovels. One year of shovel performance data along with geological, geotechnical, and climatic data were analyzed. The approach adopted was to use current and voltage data collected from hoist and crowd motors and to calculate the energy and/or power associated with digging. Analysis of performance data along with digital video records of operating shovels indicated that hoist and crowd motor voltages and currents can be used to identify the beginning and the end of individual dig cycles. A dig cycle identification algorithm was developed. Performance indicators such as dig cycle time, hoist motor energy and power, and crowd motor energy and power were determined. The shovel performance indicators provide important insight into how geology, equipment and operators affect the digging efficiency. The hoist motor power is a useful key performance indicator for assessing diggability. Hoist motor energy consumption per tonne of material excavated and the number of dig cycles required for loading a truck can be useful key performance indicators for assessing operator performance and productivity. Analysis of performance data along with operators team schedules showed that the performance of a shovel can be significantly influenced by the operator's digging technique while digging uniform material. Up to 25% variability in hoist motor power consumption and 50% variability in productivity was noted between different operators. Shovel type and dipper teeth configuration can also influence the power draw on electrical motors during digging. There is no common agreement existing on the influence of bitumen content on oil sands diggability. By comparing the hoist motor power consumption, it was found that the rich ore was more difficult to dig than the lean ore. Similarly, estuarine ore was more

Prioritising indicators in improving supply chain performance using fuzzy AHP

DEFF Research Database (Denmark)

Govindan, Kannan; Mangla, Sachin Kumar; Luthra, Sunil

2017-01-01

In this contribution, we aim to prioritise the indicators to enhance the organisational supply chain’s (SC) effectiveness from an industrial perspective. It will help industries to develop strategies for managing the SC effectively and ensuring improvement in performance continuously. To achieve...... this, this work proposes to use a two-phase research methodology. First, 36 SC performance improvement indicators are recognised from a literature survey and from field and industrial expert’s inputs. Secondly, a structural model is proposed using the fuzzy analytical hierarchy process (AHP...

Leading product-related environmental performance indicators: a selection guide and database

DEFF Research Database (Denmark)

Issa, Isabela I.; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2015-01-01

Ecodesign is a proactive environmental management and improvement approach employed in the product development process, which aims to minimize the environmental impacts caused during a product's life cycle and thus improve its environmental performance. The establishment of measurable environmental...... in the selection and application of environmental performance indicators - a more structured approach is still lacking. This paper presents the efforts made to identify and systematize existing leading product-related environmental performance indicators, based on a systematic literature review, and to develop...

Public perceptions of key performance indicators of healthcare in Alberta, Canada.

Science.gov (United States)

Northcott, Herbert C; Harvey, Michael D

2012-06-01

To examine the relationship between public perceptions of key performance indicators assessing various aspects of the health-care system. Cross-sequential survey research. Annual telephone surveys of random samples of adult Albertans selected by random digit dialing and stratified according to age, sex and region (n = 4000 for each survey year). The survey questionnaires included single-item measures of key performance indicators to assess public perceptions of availability, accessibility, quality, outcome and satisfaction with healthcare. Cronbach's α and factor analysis were used to assess the relationship between key performance indicators focusing on the health-care system overall and on a recent interaction with the health-care system. The province of Alberta, Canada during the years 1996-2004. Four thousand adults randomly selected each survey year. Survey questions measuring public perceptions of healthcare availability, accessibility, quality, outcome and satisfaction with healthcare. Factor analysis identified two principal components with key performance indicators focusing on the health system overall loading most strongly on the first component and key performance indicators focusing on the most recent health-care encounter loading most strongly on the second component. Assessments of the quality of care most recently received, accessibility of that care and perceived outcome of care tended to be higher than the more general assessments of overall health system quality and accessibility. Assessments of specific health-care encounters and more general assessments of the overall health-care system, while related, nevertheless comprise separate dimensions for health-care evaluation.

Identifying Key Performance Indicators for Holistic Hospital Management with a Modified DEMATEL Approach.

Science.gov (United States)

Si, Sheng-Li; You, Xiao-Yue; Liu, Hu-Chen; Huang, Jia

2017-08-19

Performance analysis is an important way for hospitals to achieve higher efficiency and effectiveness in providing services to their customers. The performance of the healthcare system can be measured by many indicators, but it is difficult to improve them simultaneously due to the limited resources. A feasible way is to identify the central and influential indicators to improve healthcare performance in a stepwise manner. In this paper, we propose a hybrid multiple criteria decision making (MCDM) approach to identify key performance indicators (KPIs) for holistic hospital management. First, through integrating evidential reasoning approach and interval 2-tuple linguistic variables, various assessments of performance indicators provided by healthcare experts are modeled. Then, the decision making trial and evaluation laboratory (DEMATEL) technique is adopted to build an interactive network and visualize the causal relationships between the performance indicators. Finally, an empirical case study is provided to demonstrate the proposed approach for improving the efficiency of healthcare management. The results show that "accidents/adverse events", "nosocomial infection", ''incidents/errors", "number of operations/procedures" are significant influential indicators. Also, the indicators of "length of stay", "bed occupancy" and "financial measures" play important roles in performance evaluation of the healthcare organization. The proposed decision making approach could be considered as a reference for healthcare administrators to enhance the performance of their healthcare institutions.

Sustainability at the local scale: defining highly aggregated indices for assessing environmental performance. The province of Reggio Emilia (Italy) as a case study.

Science.gov (United States)

Clerici, Nicola; Bodini, Antonio; Ferrarini, Alessandro

2004-10-01

In order to achieve improved sustainability, local authorities need to use tools that adequately describe and synthesize environmental information. This article illustrates a methodological approach that organizes a wide suite of environmental indicators into few aggregated indices, making use of correlation, principal component analysis, and fuzzy sets. Furthermore, a weighting system, which includes stakeholders' priorities and ambitions, is applied. As a case study, the described methodology is applied to the Reggio Emilia Province in Italy, by considering environmental information from 45 municipalities. Principal component analysis is used to condense an initial set of 19 indicators into 6 fundamental dimensions that highlight patterns of environmental conditions at the provincial scale. These dimensions are further aggregated in two indices of environmental performance through fuzzy sets. The simple form of these indices makes them particularly suitable for public communication, as they condensate a wide set of heterogeneous indicators. The main outcomes of the analysis and the potential applications of the method are discussed.

Key performance indicators for measuring sustainability in health ...

African Journals Online (AJOL)

Key performance indicators for measuring sustainability in health care industry in Malaysia. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Journal Home > Vol 10, No 1S (2018) > ... Next, an in-depth meeting was conducted to gain insights and feedbacks with the management of a private hospital.

Heterophobia: Subverting Heterosexual Hegemony through Intermedial Applied Performance for Young People

Science.gov (United States)

Phillips, Hannah

2016-01-01

This article responds to intermediality through a case study of an intermedial applied performance for young people. "Heterophobia," a hybrid fusion of live performance, digital technology, social media and urban street art, aimed to challenge homophobia in schools and online. Intermediality was used as a tool to enhance young people's…

Monitoring of performance management using Quality Assurance Indicators and ISO requirement

Directory of Open Access Journals (Sweden)

Dargahi H

2007-06-01

Full Text Available Background: Quality assurance is a prevention-oriented system that can be used to improve the quality of care, increase productivity and monitor the performance management in clinical laboratories. ISO 9001: 2000 requirements are a collection of management and technical systems designed to implement quality assurance and monitor performance management in organizations. Methods: A checklist was prepared to monitor the preanalytical, analytical and postanalytical stages of laboratory performance management in 16 areas and all laboratory activities in 14 of the clinical laboratories of the Tehran University of Medical Sciences (TUMS hospitals. Collected data were stored and statistically analyzed using SPSS software. Results: The best performance, in which 77.73% of quality assurance indicators were observed, was found in Sina Hospital. However, only 57.56% of these indicators were fulfilled at Farabi Hospital, with the lowest-level performance among the clinical laboratories of TUMS hospitals. The highest level of compliance with quality assurance indicators was in the hematology departments and for facility demands in management areas. Overall, quality assurance indicators were appropriately followed in only 7% of the clinical laboratories. Conclusion: The average quality assurance observation rate in the clinical laboratories studied was 67.22%, which is insufficient and must be remedied with stricter enforcement of the ISO 9001: 2000 regulations.

Health system frameworks and performance indicators in eight countries: A comparative international analysis

Directory of Open Access Journals (Sweden)

Jeffrey Braithwaite

2017-01-01

Full Text Available Objectives: Performance indicators are a popular mechanism for measuring the quality of healthcare to facilitate both quality improvement and systems management. Few studies make comparative assessments of different countries’ performance indicator frameworks. This study identifies and compares frameworks and performance indicators used in selected Organisation for Economic Co-operation and Development health systems to measure and report on the performance of healthcare organisations and local health systems. Countries involved are Australia, Canada, Denmark, England, the Netherlands, New Zealand, Scotland and the United States. Methods: Identification of comparable international indicators and analyses of their characteristics and of their broader national frameworks and contexts were undertaken. Two dimensions of indicators – that they are nationally consistent (used across the country rather than just regionally and locally relevant (measured and reported publicly at a local level, for example, a health service – were deemed important. Results: The most commonly used domains in performance frameworks were safety, effectiveness and access. The search found 401 indicators that fulfilled the ‘nationally consistent and locally relevant’ criteria. Of these, 45 indicators are reported in more than one country. Cardiovascular, surgery and mental health were the most frequently reported disease groups. Conclusion: These comparative data inform researchers and policymakers internationally when designing health performance frameworks and indicator sets.

Accurate simulation of MPPT methods performance when applied to commercial photovoltaic panels.

Science.gov (United States)

Cubas, Javier; Pindado, Santiago; Sanz-Andrés, Ángel

2015-01-01

A new, simple, and quick-calculation methodology to obtain a solar panel model, based on the manufacturers' datasheet, to perform MPPT simulations, is described. The method takes into account variations on the ambient conditions (sun irradiation and solar cells temperature) and allows fast MPPT methods comparison or their performance prediction when applied to a particular solar panel. The feasibility of the described methodology is checked with four different MPPT methods applied to a commercial solar panel, within a day, and under realistic ambient conditions.

Accurate Simulation of MPPT Methods Performance When Applied to Commercial Photovoltaic Panels

Directory of Open Access Journals (Sweden)

Javier Cubas

2015-01-01

Full Text Available A new, simple, and quick-calculation methodology to obtain a solar panel model, based on the manufacturers’ datasheet, to perform MPPT simulations, is described. The method takes into account variations on the ambient conditions (sun irradiation and solar cells temperature and allows fast MPPT methods comparison or their performance prediction when applied to a particular solar panel. The feasibility of the described methodology is checked with four different MPPT methods applied to a commercial solar panel, within a day, and under realistic ambient conditions.

Estimation of decay rates for fecal indicator bacteria and bacterial pathogens in agricultural field-applied manure

Science.gov (United States)

Field-applied manure is an important source of pathogenic exposure in surface water bodies for humans and ecological receptors. We analyzed the persistence and decay of fecal indicator bacteria and bacterial pathogens from three sources (cattle, poultry, swine) for agricultural f...

Using DEMATEL approach to develop relationships of performance indicators on sustainable service only supply chain performance measurement

Science.gov (United States)

Leksono, EB; Suparno; Vanany, I.

2018-04-01

Service only supply chain (SOSC) concept is service supply chain (SSC) implementation on pure services. The globalization and stakeholder pressure makes operation of SSC should give the attention to the environment effect, community, economic and intangibility assets. SOSC performance measurement (SOSCPM) may be developed for measuring of performance for sustainability aspects and intangibility assets to meet customer satisfaction. This article discusses sustainable SOSCPM based on balanced scorecard (BSC), include sustainability aspects, intangibility and relations between perspectives and indicators. From literature review, it is found 34 performance indicators that must be confirm to expert and SC actors by survey. From survey validation using weighted average and level of consensus, it is found 29 valid indicators for processed by DEMATEL. From DEMATEL, it is found 26 indicators can be used on sustainable SOSCPM. Furthermore, innovation and growth perspective most influence to other, and customer perspective most important. Intangibility indicators incorporated on innovation and growth perspective very related with human resources. Finally, relations between perspectives and indicator used to design of BSC strategy maps.

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment.

Directory of Open Access Journals (Sweden)

Aline Guttmann

Full Text Available In cluster detection of disease, the use of local cluster detection tests (CDTs is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps.

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment

Science.gov (United States)

Guttmann, Aline; Li, Xinran; Feschet, Fabien; Gaudart, Jean; Demongeot, Jacques; Boire, Jean-Yves; Ouchchane, Lemlih

2015-01-01

In cluster detection of disease, the use of local cluster detection tests (CDTs) is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC) is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps. PMID:26086911

Which priority indicators to use to evaluate nursing care performance? A discussion paper.

Science.gov (United States)

Dubois, Carl-Ardy; D'amour, Danielle; Brault, Isabelle; Dallaire, Clémence; Déry, Johanne; Duhoux, Arnaud; Lavoie-Tremblay, Mélanie; Mathieu, Luc; Karemere, Hermès; Zufferey, Arnaud

2017-12-01

A discussion of an optimal set of indicators that can be used on a priority basis to assess the performance of nursing care. Recent advances in conceptualization of nursing care performance, exemplified by the Nursing Care Performance Framework, have revealed a broad universe of potentially nursing-sensitive indicators. Organizations now face the challenge of selecting, from this universe, a realistic subset of indicators that can form a balanced and common scorecard. Discussion paper drawing on a systematic assessment of selected performance indicators. Previous works, based on systematic reviews of the literature published between 1990 - 2014, have contributed to the development of the Nursing Care Performance Framework. These works confirmed a robust set of indicators that capture the universe of content currently supported by the scientific literature and cover all major areas of nursing care performance. Building on these previous works, this study consisted in gathering the specific evidence supporting 25 selected indicators, focusing on systematic syntheses, meta-analyses and integrative reviews. This study has identified a set of 12 indicators that have sufficient breadth and depth to capture the whole spectrum of nursing care and that could be implemented on a priority basis. This study sets the stage for new initiatives aiming at filling current gaps in operationalization of nursing care performance. The next milestone is to set up the infrastructure required to collect data on these indicators and make effective use of them. © 2017 John Wiley & Sons Ltd.

Computation of a Suburban Night Train Timetable Based on Key Performance Indicators

DEFF Research Database (Denmark)

Schittenhelm, Bernd; Landex, Alex

2010-01-01

Timetable evaluation can be based on a set of key performance indicators. This article presents six essential key performance indicators: Fixed interval service frequency, direct connections, transfer waiting time, use of dedicated rolling stock, dedicated train personnel, dedicated tracks...

Key performance indicators for successful simulation projects

OpenAIRE

Jahangirian, M; Taylor, SJE; Young, T; Robinson, S

2016-01-01

There are many factors that may contribute to the successful delivery of a simulation project. To provide a structured approach to assessing the impact various factors have on project success, we propose a top-down framework whereby 15 Key Performance Indicators (KPI) are developed that represent the level of successfulness of simulation projects from various perspectives. They are linked to a set of Critical Success Factors (CSF) as reported in the simulation literature. A single measure cal...

Academic performance and correspondences with indicators of physical and psychological health

Directory of Open Access Journals (Sweden)

Alberto Portoles Ariño

2015-05-01

Full Text Available Academic performance of the teenagers is influenced and determined by numerous factors. Life style and the conducts of health adopted in this period relate to the academic performance of direct form, in such a way that the teenagers with ways of life and more healthy conducts, can present a more adapted academic performance. Equally, to support correct indicators of psychological health relates to the academic adapted performance. The results obtained with a sample of 1210 teenagers of the Region of Murcia, with a normal age of 15.13 years it allows to value the importance of the indicators of health as determinants of the academic performance, for what they should develop programs directed to supporting positive levels of said

KEY PERFORMANCE INDICATORS FOR HEALTHCARE RESEARCH ORGANIZATIONS BETWEEN 2011 AND 2015

OpenAIRE

ANISKEVICH A.S.; HALFIN R.A.

2017-01-01

In this work we identify 16 key indicators to evaluate the performance of healthcare research organizations. These indicators comprehensively characterize such aspects of performance as research output and relevance, human resource development, integration into the international scientific community, distribution of scientific knowledge, promotion of the prestige of science, and resource provision. Below, we review the existing classification of medical research institutions and their key fea...

[Individual physical performance capacity with physiological and biochemical indicators of stress].

Science.gov (United States)

Bergert, K D; Nestler, K; Böttger, H; Schettler, R

1989-09-01

22 health male subjects were exposed by a combination of physical exercises and heat. Strain related physiological and biochemical parameters were measured. Different individual reactions were obtained under controlled conditions. In dependence on the individual performance an increased mobilisation of lactat, free fatty acids and catecholamines were found. The determination of aerob physical performance can be applied for the evaluation of working capacity.

Performance indicators for nuclear medicine and industrial radiographers. Final report

International Nuclear Information System (INIS)

Hill, T.D.

1997-01-01

HCA--Assessment Experts (HCA) was retained under contract to provide evidence that a behaviourally based approach to the development of performance indicators for radioisotope users could be successfully designed, implemented and rapidly delivered to a pilot sample. Moreover, HCA believed that it was uniquely qualified to not only achieve this success, but to show further that we could instill the motivation for self-improvement in the AECB inspection ratings of Licensees and Permit Holders. In the space of about ten weeks. HCA was able to deliver a comprehensive set of web-based tools for performance indicators. Not only did we deliver these tools, but we also included such supplemental information as relevant legislation, regulations. Inspectors' preferences and recommendations, among others, so as to foster a learning component of the performance indicators tools. The call for the continuation of this work is based on two sources. The response from participants to this project was very favourable - participants want these tools. Secondly, our research and experience have shown (and the larger body of empirical research also shows) that this is the type of performance feedback and communication that participants appreciate the most, and is the most predictive of successful compliance and improvement in the future. (author)

Lean Information Management: Criteria For Selecting Key Performance Indicators At Shop Floor

Science.gov (United States)

Iuga, Maria Virginia; Kifor, Claudiu Vasile; Rosca, Liviu-Ion

2015-07-01

Most successful organizations worldwide use key performance indicators as an important part of their corporate strategy in order to forecast, measure and plan their businesses. Performance metrics vary in their purpose, definition and content. Therefore, the way organizations select what they think are the optimal indicators for their businesses varies from company to company, sometimes even from department to department. This study aims to answer the question of what is the most suitable way to define and select key performance indicators. More than that, it identifies the right criteria to select key performance indicators at shop floor level. This paper contributes to prior research by analysing and comparing previously researched selection criteria and proposes an original six-criteria-model, which caters towards choosing the most adequate KPIs. Furthermore, the authors take the research a step further by further steps to closed research gaps within this field of study.

Implementation of renal key performance indicators: promoting improved clinical practice.

Science.gov (United States)

Toussaint, Nigel D; McMahon, Lawrence P; Dowling, Gregory; Soding, Jenny; Safe, Maria; Knight, Richard; Fair, Kathleen; Linehan, Leanne; Walker, Rowan G; Power, David A

2015-03-01

In the Australian state of Victoria, the Renal Health Clinical Network (RHCN) of the Department of Health Victoria established a Renal Key Performance Indicator (KPI) Working Group in 2011. The group developed four KPIs related to chronic kidney disease and dialysis. A transplant working group of the RHCN developed two additional KPIs. The aim was to develop clinical indicators to measure performance of renal services to drive service improvement. A data collection and benchmarking programme was established, with data provided monthly to the Department using a purpose-designed website portal. The KPI Working Group is responsible for analysing data each quarter and ensuring indicators remain accurate and relevant. Each indicator has clear definitions and targets, and assess (i) patient education, (ii) timely creation of vascular access for haemodialysis, (iii) proportion of patients dialysing at home, (iv) incidence of dialysis-related peritonitis, (v) incidence of pre-emptive renal transplantation, and (vi) timely listing of patients for deceased donor transplantation. Most KPIs have demonstrated improved performance over time with limited gains notably in two: the proportion of patients dialysing at home (KPI 3) and timely listing patients for transplantation (KPI 6). KPI implementation has been established in Victoria for 2 years, providing performance data without additional funding. The six Victorian KPIs are measurable, relevant and modifiable, and implementation relies on enthusiasm and goodwill of physicians and nurses involved in collecting data. The KPIs require further evaluation, but adoption of a similar programme by other jurisdictions could lead to improved national outcomes. © 2014 Asian Pacific Society of Nephrology.

Key Performance Indicators (KPI) Developing, Implementing, and Using Winning KPIs

CERN Document Server

Parmenter, David

2010-01-01

An in-depth look at how to create and use key performance indicators (KPIs), from the King of KPIs â€" now updated and expanded! By exploring measures that have transformed businesses, David Parmenter has developed a methodology that is breathtaking in its simplicity and yet profound in its impact. Now in an updated and expanded Second Edition, Key Performance Indicators is a proactive guide representing a significant shift in the way KPIs are developed and used, with an abundance of implementation tools, including: The four foundation stones that lead the development and use of KPIs; A 12-ste

Preliminary performance test of control rod position indicator for ballscrew type CEDM

International Nuclear Information System (INIS)

Yoo, J. Y.; Kim, J. H.; Hu, H.; Lee, J. S.; Kim, J. I.

2003-01-01

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. The prototype of control rod position indicator having the high performance for the ballscrew type CEDM was developed on the basis of RSPT technology identified through the survey. The characteristics of control rod position indicator was defined and documented through design procedure and preliminary performance test

Safety and performance indicators for repositories in salt and clay formations

International Nuclear Information System (INIS)

Wolf, Jens; Ruebel, Andre; Noseck, Ulrich; Becker, Dirk

2008-07-01

The GRS (Gesellschaft fuer Reaktorsicherheit) study aims to the identification of suitable indicators for repositories in salt and clay formation. It is not intended to compare the two formations with respect to the safe disposal of radioactive waste. A first set of safety and performance indicators for both host rocks has been derived on the basis of results of the SPIN project. Reference values for the safety indicators have been determined. The suitability of the indicators and their significance for different time frames Is demonstrated by means of deterministic model calculations and external parameter variations of previous studies. The safety indicators considered in the report are the effective dose rate (Sv/a), the radiotoxicity concentration in the biosphere water (Sv/m 3 ) and the radiotoxicity flux from the geosphere (overlying rock) (Sv/a). The performance indicators considered in the study are the radiotoxicity inventory in different compartments (S), radiotoxicity fluxes from compartments and the integrated radiotoxicity fluxes from compartments (Sv).

Applying Required Navigation Performance Concept for Traffic Management of Small Unmanned Aircraft Systems

Science.gov (United States)

Jung, Jaewoo; D'Souza, Sarah N.; Johnson, Marcus A.; Ishihara, Abraham K.; Modi, Hemil C.; Nikaido, Ben; Hasseeb, Hashmatullah

2016-01-01

In anticipation of a rapid increase in the number of civil Unmanned Aircraft System(UAS) operations, NASA is researching prototype technologies for a UAS Traffic Management (UTM) system that will investigate airspace integration requirements for enabling safe, efficient low-altitude operations. One aspect a UTM system must consider is the correlation between UAS operations (such as vehicles, operation areas and durations), UAS performance requirements, and the risk to people and property in the operational area. This paper investigates the potential application of the International Civil Aviation Organizations (ICAO) Required Navigation Performance (RNP) concept to relate operational risk with trajectory conformance requirements. The approach is to first define a method to quantify operational risk and then define the RNP level requirement as a function of the operational risk. Greater operational risk corresponds to more accurate RNP level, or smaller tolerable Total System Error (TSE). Data from 19 small UAS flights are used to develop and validate a formula that defines this relationship. An approach to assessing UAS-RNP conformance capability using vehicle modeling and wind field simulation is developed to investigate how this formula may be applied in a future UTM system. The results indicate the modeled vehicles flight path is robust to the simulated wind variation, and it can meet RNP level requirements calculated by the formula. The results also indicate how vehicle-modeling fidelity may be improved to adequately verify assessed RNP level.

Applying a supervised ANN (artificial neural network) approach to the prognostication of driven wheel energy efficiency indices

International Nuclear Information System (INIS)

Taghavifar, Hamid; Mardani, Aref

2014-01-01

This paper examines the prediction of energy efficiency indices of driven wheels (i.e. traction coefficient and tractive power efficiency) as affected by wheel load, slippage and forward velocity at three different levels with three replicates to form a total of 162 data points. The pertinent experiments were carried out in the soil bin testing facility. A feed-forward ANN (artificial neural network) with standard BP (back propagation) algorithm was practiced to construct a supervised representation to predict the energy efficiency indices of driven wheels. It was deduced, in view of the statistical performance criteria (i.e. MSE (mean squared error) and R 2 ), that a supervised ANN with 3-8-10-2 topology and Levenberg–Marquardt training algorithm represented the optimal model. Modeling implementations indicated that ANN is a powerful technique to prognosticate the stochastic energy efficiency indices as affected by soil-wheel interactions with MSE of 0.001194 and R 2 of 0.987 and 0.9772 for traction coefficient and tractive power efficiency. It was found that traction coefficient and tractive power efficiency increase with increased slippage. A similar trend is valid for the influence of wheel load on the objective parameters. Wherein increase of velocity led to an increment of tractive power efficiency, velocity had no significant effect on traction coefficient. - Highlights: • Energy efficiency indexes were assessed as affected by tire parameters. • ANN was applied for prognostication of the objective parameters. • A 3-8-10-2 ANN with MSE of 0.001194 and R 2 of 0.987 and 0.9772 was designated as optimal model. • Optimal values of learning rate and momentum were found 0.9 and 0.5, respectively

Comfort Indicators for the Assessment of Indoor Environmental Building Performance

DEFF Research Database (Denmark)

Brohus, Henrik; Bendtsen, A.; Sørensen, M.

2006-01-01

Indoor environmental building performance assessment requires efficient indicators of the indoor comfort. In order to be effective and useful the comfort indicators must be able to include the temporal variation of indoor comfort as well as the degree of discomfort perceived by the occupants....... This paper discusses and presents a number of comfort indicators that includes both the temporal variation and the degree of discomfort in the calculations. A test case comprising a ventilated office building is used to show the application of the various comfort indices. It is found that the new comfort...

Critical appraisal of the Vienna consensus: performance indicators for assisted reproductive technology laboratories.

Science.gov (United States)

Lopez-Regalado, María Luisa; Martínez-Granados, Luis; González-Utor, Antonio; Ortiz, Nereyda; Iglesias, Miriam; Ardoy, Manuel; Castilla, Jose A

2018-05-24

The Vienna consensus, based on the recommendations of an expert panel, has identified 19 performance indicators for assisted reproductive technology (ART) laboratories. Two levels of reference values are established for these performance indicators: competence and benchmark. For over 10 years, the Spanish embryology association (ASEBIR) has participated in the definition and design of ART performance indicators, seeking to establish specific guidelines for ART laboratories to enhance quality, safety and patient welfare. Four years ago, ASEBIR took part in an initiative by AENOR, the Spanish Association for Standardization and Certification, to develop a national standard in this field (UNE 17900:2013 System of quality management for assisted reproduction laboratories), extending the former requirements, based on ISO 9001, to include performance indicators. Considering the experience acquired, we discuss various aspects of the Vienna consensus and consider certain discrepancies in performance indicators between the consensus and UNE 179007:2013, and analyse the definitions, methodology and reference values used. Copyright © 2018. Published by Elsevier Ltd.

Indicators and Performance Measures for Transportation, Environment and Sustainability in North America

DEFF Research Database (Denmark)

Gudmundsson, H.

A study trip to USA and Canada was undertaken in October 2000 with support from the German Marshall Fund. The purpose of the trip was to learn about performance planning and performance indicators in the area of transportation and environment. The report describe findings from the trip in the fol......A study trip to USA and Canada was undertaken in October 2000 with support from the German Marshall Fund. The purpose of the trip was to learn about performance planning and performance indicators in the area of transportation and environment. The report describe findings from the trip...... in the following areas: how performance planning for transportation and environment is conducted in the US and Canada at federal, state and municipal level, to what extent performance planning serve as an instrument to integrate environmental and sustainability goals in transportation policy which specific...... indicators are used to measure the environmental sustainability of transportation systems and policies in the two North American countries....

THE IMPORTANCE OF PERFORMANCE INDICATORS IN ANALYZING BUSINESS ENVIRONMENT AND BUSINESS EVOLUTION

Directory of Open Access Journals (Sweden)

Andreea-Mihaela STROE

2017-05-01

Full Text Available The analysis of economic environment brings into attention of the ones interest important trends and important evolutions that can bring into surface new strategies and new ways of obtaining profit. This is to say that staying in connection with all the changes and analyzing the trends in business performance, analyzing performance indicators helps managers to know not only their firm but the environment, the opponents, stakeholders and the opportunities that can be optimized and used as advantages in a turbulent economic area. In general, performance is associated with two key processes: performance management and its measurement. Performance management is a holistic process which embodies the subject of performance and reflects the connection between the economic entity and performance, including processes such as definition of strategy, implementation of strategy and training and performance measurement. Performance measurement appears as a low performance management that focuses mainly on the identification, tracking and communicating performance that results through the use of performance. Key performance indicators help quantify the formation of a result, providing visibility in relation to the performance of individuals, teams, departments and organizations, allowing decision makers to take action in order to achieve the objectives desired. These indicators can be appreciated based upon the trends in the company or benchmarking - comparisons with standard industry values or reference companies.

Operational Safety Performance Indicators and Balanced Scorecard in HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Ahn, Guk-Hoon; Lee, Kye-Hong; Lim, In-Cheol; Kim, Hark-Rho

2007-01-01

Research reactors need an extensive basis for ensuring their safety. The importance of a safety management in nuclear facilities and activities has been emphasized. The safety activities in HANARO have been continuously conducted to enhance its safe operation. Last year, HANARO prepared two indicator sets to measure and assess the safety status of the reactor's operation and utilization. One is Safety Performance Indicators (SPI) and the other is Balanced Scorecard (BSC). Through reviewing these indicators, we can obtain the following information; - Plant safety status - Safety parameter trends - Safety information, for example, reactor operation status and radiation safety HANARO will continuously pursue the trends of SPI and BSC

Applying Best Business Practices from Corporate Performance Management to DoD

Science.gov (United States)

2013-01-01

leading or governing large, complex corporations and are experienced in creating reliable solutions to complex management issues guided by best business ...recommendations and effective solutions aimed at improving DoD. Defense Business Board Corporate Performance Management REPORT FY13-03 Task...Group 1 Applying Best Business Practices from Corporate Performance Management to DoD TASK The Deputy Secretary of Defense (DEPSECDEF

Use of performance indicators in the analysis of running gait impacts

OpenAIRE

Pàmies Vila, Rosa; González, Francisco; Kövecses, József; Font Llagunes, Josep Maria

2017-01-01

Foot-ground impact is a critical event during the running cycle. In this work, three performance indicators were used to characterize foot-ground impact intensity: the effective pre-impact kinetic energy, representative elements of the effective mass matrix, and the critical coefficient of friction. These performance indicators can be obtained from the inertial properties of the biomechanical system and its pre-impact mechanical state, avoiding the need to carry out force measurements. Ground...

Safe, Healthy and Ready to Succeed: Arizona School Readiness Key Performance Indicators

Science.gov (United States)

Migliore, Donna E.

2006-01-01

"Safe, Healthy and Ready to Succeed: Arizona School Readiness Key Performance Indicators" presents a set of baseline measurements that gauge how well a statewide system of school readiness supports is addressing issues that affect Arizona children's readiness for school. The Key Performance Indicators (KPIs) measure the system, rather…

Performance indicators proposal for the government electric power distribution facilities in the Brazilian electric sector; Proposta de indicadores de desempenho as distribuidoras de energia federalizadas do setor eletrico brasileiro

Energy Technology Data Exchange (ETDEWEB)

Carregaro, Jose Carlos

2003-07-01

In this dissertation a set of indicators is proposed to the Centrais Eletricas Brasileiras S/A - ELETROBRAS, allowing the holding companies to attain the top position in the market, and a global vision of their performance. The methodology applied the definition of the performance indicators and the context, existing studies, and the indicators used by the Brazilian electric sector. It is expected that the proposed set of indicators be used by ELETROBRAS for a better planning and a more objective control of the holding companies performance, as well as an analysis of their administration strong and weak aspects.

Using Templates and Linguistic Patterns to Define Process Performance Indicators

OpenAIRE

Río Ortega, Adela del; Resinas Arias de Reyna, Manuel; Durán Toro, Amador; Ruiz Cortés, Antonio

2014-01-01

Process performance management (PPM) aims at measuring, monitoring and analysing the performance of business processes (BPs), in order to check the achievement of strategic and operational goals and to support decision making for their optimisation. PPM is based on process performance indicators (PPIs), so having an appropriate definition of them is crucial. One of the main problems of PPIs definition is to express them in an unambiguous, complete, understandable, traceable ...

Performance indicators for evaluation of North Sea oil and gas platforms

DEFF Research Database (Denmark)

Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian

2013-01-01

Well-defined performance indicators can motivate optimal operation of offshore oil and gas platforms. This paper aims to develop such parameters, indicating possibilities for reducing power consumption and emissions of pollutants. Different platforms have different oilfield conditions and process...... specifications. Such conditions determine the theoretical minimum work required to operate the platforms, and can have a high impact on the power consumption. We introduce performance indicators based on energy and exergy. The specific energy use and specific exergy consumption evaluate the resources spent...... required under ideal conditions (i.e. reversible operation), and specific exergy destruction illustrates the amount of resources lost due to irreversibilities. We use these indicators to evaluate the oil and gas processing at four different North Sea platforms that differ by the field lifetime, system...

Industry based performance indicators for nuclear power plants

International Nuclear Information System (INIS)

Connelly, E.M.; Van Hemel, S.B.; Haas, P.M.

1990-07-01

This report presents the results of the first phase of a two-phase study, performed with the goal of developing indirect (leading) indicators of nuclear power plant safety, using other industries as a model. It was hypothesized that other industries with similar public safety concerns could serve as analogs to the nuclear power industry. Many process industries have many more years of operating experience, and many more plants than the nuclear power industry, and thus should have accumulated much useful safety data. In Phase 1, the investigators screened a variety of potential industry analogs and chose the chemical/petrochemical manufacturing industry as the primary analog for further study. Information was gathered on safety programs and indicators in the chemical industry, as well as in the nuclear power industry. Frameworks were selected for the development of indicators which could be transferred from the chemical to the nuclear power environment, and candidate sets of direct and indirect safety indicators were developed. Estimates were made of the availability and quality of data in the chemical industry, and plans were developed for further investigating and testing these candidate indicators against safety data in both the chemical and nuclear power industries in Phase 2. 38 refs., 4 figs., 7 tabs

Key performance indicators for Australian mental health court liaison services.

Science.gov (United States)

Davidson, Fiona; Heffernan, Ed; Greenberg, David; Butler, Tony; Burgess, Philip

2017-12-01

The aim of this paper is to describe the development and technical specifications of a framework and national key performance indicators (KPIs) for Australian mental health Court Liaison Services (CLSs) by the National Mental Health Court Liaison Performance Working Group (Working Group). Representatives from each Australian State and Territory were invited to form a Working Group. Through a series of national workshops and meetings, a framework and set of performance indicators were developed using a review of literature and expert opinion. A total of six KPIs for CLSs have been identified and a set of technical specifications have been formed. This paper describes the process and outcomes of a national collaboration to develop a framework and KPIs. The measures have been developed to support future benchmarking activities and to assist services to identify best practice in this area of mental health service delivery.

Carbon footprint as environmental performance indicator for the manufacturing industry

DEFF Research Database (Denmark)

Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

2010-01-01

With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

Road safety performance indicators for the interurban road network.

Science.gov (United States)

Yannis, George; Weijermars, Wendy; Gitelman, Victoria; Vis, Martijn; Chaziris, Antonis; Papadimitriou, Eleonora; Azevedo, Carlos Lima

2013-11-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The objective of this research is the development of an SPI for the road network, to be used as a benchmark for cross-region comparisons. The developed SPI essentially makes a comparison of the existing road network to the theoretically required one, defined as one which meets some minimum requirements with respect to road safety. This paper presents a theoretical concept for the determination of this SPI as well as a translation of this theory into a practical method. Also, the method is applied in a number of pilot countries namely the Netherlands, Portugal, Greece and Israel. The results show that the SPI could be efficiently calculated in all countries, despite some differences in the data sources. In general, the calculated overall SPI scores were realistic and ranged from 81 to 94%, with the exception of Greece where the SPI was relatively lower (67%). However, the SPI should be considered as a first attempt to determine the safety level of the road network. The proposed method has some limitations and could be further improved. The paper presents directions for further research to further develop the SPI. Copyright © 2012 Elsevier Ltd. All rights reserved.

20 CFR 670.980 - What are the indicators of performance for Job Corps?

Science.gov (United States)

2010-04-01

... Provisions § 670.980 What are the indicators of performance for Job Corps? (a) At a minimum, the performance... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What are the indicators of performance for Job Corps? 670.980 Section 670.980 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION...

Health Care Performance Indicators for Health Information Systems.

Science.gov (United States)

Hyppönen, Hannele; Ronchi, Elettra; Adler-Milstein, Julia

2016-01-01

Health Information Systems (HISs) are expected to have a positive impact on quality and efficiency of health care. Rapid investment in and diffusion of HISs has increased the importance of monitoring the adoption and impacts of them in order to learn from the initiatives, and to provide decision makers evidence on the role of HISs in improving health care. However, reliable and comparable data across initiatives in various countries are rarely available. A four-phase approach is used to compare different HIS indicator methodologies in order to move ahead in defining HIS indicators for monitoring effects of HIS on health care performance. Assessed approaches are strong on different aspects, which provide some opportunities for learning across them but also some challenges. As yet, all of the approaches do not define goals for monitoring formally. Most focus on health care structural and process indicators (HIS availability and intensity of use). However, many approaches are generic in description of HIS functionalities and context as well as their impact mechanisms on health care for HIS benchmarking. The conclusion is that, though structural and process indicators of HIS interventions are prerequisites for monitoring HIS impacts on health care outputs and outcomes, more explicit definition is needed of HIS contexts, goals, functionalities and their impact mechanisms in order to move towards common process and outcome indicators. A bottom-up-approach (participation of users) could improve development and use of context-sensitive HIS indicators.

Key Performance Indicators in Irish Hospital Libraries: Developing Outcome-Based Metrics

Directory of Open Access Journals (Sweden)

Michelle Dalton

2012-12-01

Full Text Available Objective – To develop a set of generic outcome-based performance measures for Irishhospital libraries.Methods – Various models and frameworks of performance measurement were used as atheoretical paradigm to link the impact of library services directly with measurablehealthcare objectives and outcomes. Strategic objectives were identified, mapped toperformance indicators, and finally translated into response choices to a single-questiononline survey for distribution via email.Results – The set of performance indicators represents an impact assessment tool whichis easy to administer across a variety of healthcare settings. In using a model directlyaligned with the mission and goals of the organization, and linked to core activities andoperations in an accountable way, the indicators can also be used as a channel throughwhich to implement action, change, and improvement.Conclusion – The indicators can be adopted at a local and potentially a national level, asboth a tool for advocacy and to assess and improve service delivery at a macro level. Toovercome the constraints posed by necessary simplifications, substantial further research is needed by hospital libraries to develop more sophisticated and meaningful measures of impact to further aid decision making at a micro level.

Key performance indicators in plant asset management: hype, burden or real help?

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, A. (Steinbeis Advanced Risk Technologies, Stuttgart (Germany)); Bareiss, J.M. (EnBW, Stuttgart (Germany))

2010-05-15

The paper tackles the increasing role and use of indicators (e.g. the key performance indicators, KPIs) in asset management in power and process plants, in particular for risk and safety management (safety performance indicators, SPIs), inspection, maintenance, emerging risks analysis and aging management. The two main aspects of the use of indicators are monitoring of performance (e.g. of a single unit) and benchmarking (e.g. among different units). The basis for the considerations presented in the paper are several international projects in the field, showing that the main issue in the field is not and cannot be just the introduction of new indicators as such. They deal with the principles of establishing indicators, establishing generally accepted indicators (goal 'globally accepted' indicators), creating of 'repositories' of indicators in industry and respective tools. The repository/tool developed in the EU project iNTeg-Risk is presented in more detail. The main proposed criteria for successful introduction are the acceptance, transparency and clear added value, e.g. when the indicators help in finding solutions for the issues where the conventional analysis, e.g. the one based on engineering models and analysis is too expensive, complex or simply unavailable. Three practical cases are briefly shown in the paper: one for the improved asset management in a refinery, one for the identification of indicators helping to deal with emerging risks (how to identify them and how to assess risks of a new technology) and one for the implementation of a complex aging management program for industrial plants. (orig.)

Key performance indicators in plant asset management: hype, burden or real help?

International Nuclear Information System (INIS)

Jovanovic, A.; Bareiss, J.M.

2010-01-01

The paper tackles the increasing role and use of indicators (e.g. the key performance indicators, KPIs) in asset management in power and process plants, in particular for risk and safety management (safety performance indicators, SPIs), inspection, maintenance, emerging risks analysis and aging management. The two main aspects of the use of indicators are monitoring of performance (e.g. of a single unit) and benchmarking (e.g. among different units). The basis for the considerations presented in the paper are several international projects in the field, showing that the main issue in the field is not and cannot be just the introduction of new indicators as such. They deal with the principles of establishing indicators, establishing generally accepted indicators (goal 'globally accepted' indicators), creating of 'repositories' of indicators in industry and respective tools. The repository/tool developed in the EU project iNTeg-Risk is presented in more detail. The main proposed criteria for successful introduction are the acceptance, transparency and clear added value, e.g. when the indicators help in finding solutions for the issues where the conventional analysis, e.g. the one based on engineering models and analysis is too expensive, complex or simply unavailable. Three practical cases are briefly shown in the paper: one for the improved asset management in a refinery, one for the identification of indicators helping to deal with emerging risks (how to identify them and how to assess risks of a new technology) and one for the implementation of a complex aging management program for industrial plants. (orig.)

Plant safety and performance indicators for regulatory use

International Nuclear Information System (INIS)

Ferjancic, M.; Nemec, T.; Cimesa, S.

2004-01-01

Slovenian Nuclear Safety Administration (SNSA) supervises nuclear and radiological safety of Krsko NPP. This SNSA supervision is performed through inspections, safety evaluations of plant modifications and event analyses as well as with the safety and performance indicators (SPI) which are a valuable data source for plant safety monitoring. In the past SNSA relied on the SPI provided by Krsko NPP and did not have a set of SPI which would be more appropriate for regulatory use. In 2003 SNSA started with preparation of a new set of SPI which would be more suitable for performing the regulatory oversight of the plant. New internal SNSA procedure which is under preparation will define use and evaluation of SPI and will include definitions for the proposed set of SPI. According to the evaluation of SPI values in comparison with the limiting values and/or trending, the procedure will define SNSA response and actions. (author)

Management of Industrial Performance Indicators: Regression Analysis and Simulation

Directory of Open Access Journals (Sweden)

Walter Roberto Hernandez Vergara

2017-11-01

Full Text Available Stochastic methods can be used in problem solving and explanation of natural phenomena through the application of statistical procedures. The article aims to associate the regression analysis and systems simulation, in order to facilitate the practical understanding of data analysis. The algorithms were developed in Microsoft Office Excel software, using statistical techniques such as regression theory, ANOVA and Cholesky Factorization, which made it possible to create models of single and multiple systems with up to five independent variables. For the analysis of these models, the Monte Carlo simulation and analysis of industrial performance indicators were used, resulting in numerical indices that aim to improve the goals’ management for compliance indicators, by identifying systems’ instability, correlation and anomalies. The analytical models presented in the survey indicated satisfactory results with numerous possibilities for industrial and academic applications, as well as the potential for deployment in new analytical techniques.

Road safety performance indicators for the interurban road network.

NARCIS (Netherlands)

Yannis, G. Weijermars, W.A.M. Gitelman, V. Vis, M. Chazirisa, A. Papadimitriou, E. & Lima Azevedo, C.

2013-01-01

Various road safety performance indicators (SPIs) have been proposed for different road safety research areas, mainly as regards driver behaviour (e.g. seat belt use, alcohol, drugs, etc.) and vehicles (e.g. passive safety); however, no SPIs for the road network and design have been developed. The

Development of a performance-based industrial energy efficiency indicator for corn refining plants.

Energy Technology Data Exchange (ETDEWEB)

Boyd, G. A.; Decision and Information Sciences; USEPA

2006-07-31

Organizations that implement strategic energy management programs have the potential to achieve sustained energy savings if the programs are carried out properly. A key opportunity for achieving energy savings that plant managers can take is to determine an appropriate level of energy performance by comparing their plant's performance with that of similar plants in the same industry. Manufacturing facilities can set energy efficiency targets by using performance-based indicators. The U.S. Environmental Protection Agency (EPA), through its ENERGY STAR{reg_sign} program, has been developing plant energy performance indicators (EPIs) to encourage a variety of U.S. industries to use energy more efficiently. This report describes work with the corn refining industry to provide a plant-level indicator of energy efficiency for facilities that produce a variety of products--including corn starch, corn oil, animal feed, corn sweeteners, and ethanol--for the paper, food, beverage, and other industries in the United States. Consideration is given to the role that performance-based indicators play in motivating change; the steps needed to develop indicators, including interacting with an industry to secure adequate data for an indicator; and the actual application and use of an indicator when complete. How indicators are employed in the EPA's efforts to encourage industries to voluntarily improve their use of energy is discussed as well. The report describes the data and statistical methods used to construct the EPI for corn refining plants. Individual equations are presented, as are the instructions for using them in an associated Excel spreadsheet.

Objective indicators of organizational performance at nuclear power plants

International Nuclear Information System (INIS)

Olson, J.; Osborn, R.N.; Jackson, D.H.; Shikiar, R.

1986-01-01

This report summarizes research conducted on the development and validation of organizational performance measures at operating nuclear power plants. Publicly available data, including measures from Licensee Event Reports, operating and outage data, and violations data, are used to predict penultimate measures of plant safety. Penultimate measures of safety include potentially significant events, overexposures and near overexposures, and several radiological release measures. The 1981 and 1982 performance measures are used in correlation and regression analyses to predict performance on the penultimate safety measures in 1982 and 1983. Many of the plant performance measures are consistently predictive of the frequency of potentially significant events. No strong, consistent predictors emerge for exposures or liquid radiological releases. Several performance measures are consistent predictors of gaseous releases. The regression analyses indicate that the predictors do not tend to combine in consistent, multivariate patterns, and controls for plant age, size, type, region, and fuel cycle stage do not substantially affect the results. The analysis concludes that existing performance data do appear to be predictive of some aspects of plant safety performance. The report recommends that more reliable, summary performance measures be created by combining several of the performance measures tested in the current analysis

Safety performance evaluation using proactive indicators in a selected industry

Directory of Open Access Journals (Sweden)

Abolfazl Barkhordari

2015-03-01

Full Text Available Background & Objectives: Quality and effectiveness of safety systems are critical factors in achieving their goals. This study was aimed to represent a method for performance evaluation of safety systems by proactive indicators using different updated models in the field of safety which will be tested in a selected industry. Methods: This study is a cross-sectional study. Proactive indicators used in this study were: Unsafe acts rate, Safety Climate, Accident Proneness, and Near-miss incident rate. The number of in 1473 safety climate questionnaires and 543 Accident Proneness questionnaires was completed. Results: The minimum and maximum safety climate score were 56.88 and 58.2, respectively, and the minimum and maximum scores of Accident Proneness were 98.2 and 140.7, respectively. The maximum number of Near-miss incident rate were 408 and the minimum of that was 196. The maximum number of unsafe acts rate was 43.8 percent and the minimum of that was 27.2 percent. In nine dimensions of Safety climate the eighth dimension (personal perception of risk with the score of 4.07 has the lowest score and the fourth (laws and safety regulations dimension with 8.05 has the highest score. According to expert opinions, the most important indicator in the assessment of safety performance was unsafe acts rate, while near-miss incident rate was the least important one. Conclusion: The results of this survey reveal that using proactive (Prospective indicators could be an appropriate method in organizations safety performance evaluation.

Mechanical Performance versus Corrosion Damage Indicators for Corroded Steel Reinforcing Bars

Directory of Open Access Journals (Sweden)

Silvia Caprili

2015-01-01

Full Text Available The experimental results of a testing campaign including tensile and low-cycle fatigue tests on different reinforcing steel bar types in the as-delivered and corroded condition are presented. Experimental data were statistically analyzed adopting ANOVA technique; Performance Indicators (PIs, describing the mechanical performance characteristics of reinforcements, and Corrosion Damage Indicators (CDIs, describing the detrimental effects of corrosion phenomena, were determined and correlated in order to evaluate the influence of corrosion on the behaviour of reinforcing steels, providing useful information for designers in addition to what is presented in current standards.

Anodal tDCS applied during multitasking training leads to transferable performance gains.

Science.gov (United States)

Filmer, Hannah L; Lyons, Maxwell; Mattingley, Jason B; Dux, Paul E

2017-10-11

Cognitive training can lead to performance improvements that are specific to the tasks trained. Recent research has suggested that transcranial direct current stimulation (tDCS) applied during training of a simple response-selection paradigm can broaden performance benefits to an untrained task. Here we assessed the impact of combined tDCS and training on multitasking, stimulus-response mapping specificity, response-inhibition, and spatial attention performance in a cohort of healthy adults. Participants trained over four days with concurrent tDCS - anodal, cathodal, or sham - applied to the left prefrontal cortex. Immediately prior to, 1 day after, and 2 weeks after training, performance was assessed on the trained multitasking paradigm, an untrained multitasking paradigm, a go/no-go inhibition task, and a visual search task. Training combined with anodal tDCS, compared with training plus cathodal or sham stimulation, enhanced performance for the untrained multitasking paradigm and visual search tasks. By contrast, there were no training benefits for the go/no-go task. Our findings demonstrate that anodal tDCS combined with multitasking training can extend to untrained multitasking paradigms as well as spatial attention, but with no extension to the domain of response inhibition.

Thermodynamic Performance Indicators for Offshore Oil and Gas Processing: Application to Four North Sea Facilities

DEFF Research Database (Denmark)

Voldsund, Mari; Nguyen, Tuong-Van; Elmegaard, Brian

2014-01-01

Well-defined performance indicators can motivate optimal operation of offshore oil and gas platforms. We evaluate several thermodynamic performance indicators presented in the literature according to three criteria: Thermodynamic performance indicators should evaluate the use of technically...

Dashboard report on performance on select quality indicators to cancer care providers.

Science.gov (United States)

Stattin, Pär; Sandin, Fredrik; Sandbäck, Torsten; Damber, Jan-Erik; Franck Lissbrant, Ingela; Robinson, David; Bratt, Ola; Lambe, Mats

2016-01-01

Cancer quality registers are attracting increasing attention as important, but still underutilized sources of clinical data. To optimize the use of registers in quality assurance and improvement, data have to be rapidly collected, collated and presented as actionable, at-a-glance information to the reporting departments. This article presents a dashboard performance report on select quality indicators to cancer care providers. Ten quality indicators registered on an individual patient level in the National Prostate Cancer Register of Sweden and recommended by the National Prostate Cancer Guidelines were selected. Data reported to the National Prostate Cancer Register are uploaded within 24 h to the Information Network for Cancer Care platform. Launched in 2014, "What''s Going On, Prostate Cancer" provides rapid, at-a-glance performance feedback to care providers. The indicators include time to report to the National Prostate Cancer Register, waiting times, designated clinical nurse specialist, multidisciplinary conference, adherence to guidelines for diagnostic work-up and treatment, and documentation and outcome of treatment. For each indicator, three performance levels were defined. What's Going On, a dashboard performance report on 10 selected quality indicators to cancer care providers, provides an example of how data in cancer quality registers can be transformed into condensed, at-a-glance information to be used as actionable metrics for quality assurance and improvement.

Prioritizing public- private partnership models for public hospitals of iran based on performance indicators.

Science.gov (United States)

Gholamzadeh Nikjoo, Raana; Jabbari Beyrami, Hossein; Jannati, Ali; Asghari Jaafarabadi, Mohammad

2012-01-01

The present study was conducted to scrutinize Public- Private Partnership (PPP) models in public hospitals of different countries based on performance indicators in order to se-lect appropriated models for Iran hospitals. In this mixed (quantitative-qualitative) study, systematic review and expert panel has been done to identify varied models of PPP as well as performance indicators. In the second step we prioritized performance indicator and PPP models based on selected performance indicators by Analytical Hierarchy process (AHP) technique. The data were analyzed by Excel 2007 and Expert Choice11 software's. In quality - effectiveness area, indicators like the rate of hospital infections (100%), hospital accidents prevalence rate (73%), pure rate of hospital mortality (63%), patient satisfaction percentage (53%), in accessibility equity area indicators such as average inpatient waiting time (100%) and average outpatient waiting time (74%), and in financial - efficiency area, indicators including average length of stay (100%), bed occupation ratio (99%), specific income to total cost ratio (97%) have been chosen to be the most key performance indicators. In the pri¬oritization of the PPP models clinical outsourcing, management, privatization, BOO (build, own, operate) and non-clinical outsourcing models, achieved high priority for various performance in¬dicator areas. This study had been provided the most common PPP options in the field of public hospitals and had gathered suitable evidences from experts for choosing appropriate PPP option for public hospitals. Effect of private sector presence in public hospital performance, based on which PPP options undertaken, will be different.

Artificial neural network model for prediction of safety performance indicators goals in nuclear plants

Energy Technology Data Exchange (ETDEWEB)

Souto, Kelling C.; Nunes, Wallace W. [Instituto Federal de Educacao, Ciencia e Tecnologia do Rio de Janeiro, Nilopolis, RJ (Brazil). Lab. de Aplicacoes Computacionais; Machado, Marcelo D., E-mail: dornemd@eletronuclear.gov.b [ELETROBRAS Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil). Gerencia de Combustivel Nuclear - GCN.T

2011-07-01

Safety performance indicators have been developed to provide a quantitative indication of the performance and safety in various industry sectors. These indexes can provide assess to aspects ranging from production, design, and human performance up to management issues in accordance with policy, objectives and goals of the company. The use of safety performance indicators in nuclear power plants around the world is a reality. However, it is necessary to periodically set goal values. Such goals are targets relating to each of the indicators to be achieved by the plant over a predetermined period of operation. The current process of defining these goals is carried out by experts in a subjective way, based on actual data from the plant, and comparison with global indices. Artificial neural networks are computational techniques that present a mathematical model inspired by the neural structure of intelligent organisms that acquire knowledge through experience. This paper proposes an artificial neural network model aimed at predicting values of goals to be used in the evaluation of safety performance indicators for nuclear power plants. (author)

Artificial neural network model for prediction of safety performance indicators goals in nuclear plants

International Nuclear Information System (INIS)

Souto, Kelling C.; Nunes, Wallace W.; Machado, Marcelo D.

2011-01-01

Safety performance indicators have been developed to provide a quantitative indication of the performance and safety in various industry sectors. These indexes can provide assess to aspects ranging from production, design, and human performance up to management issues in accordance with policy, objectives and goals of the company. The use of safety performance indicators in nuclear power plants around the world is a reality. However, it is necessary to periodically set goal values. Such goals are targets relating to each of the indicators to be achieved by the plant over a predetermined period of operation. The current process of defining these goals is carried out by experts in a subjective way, based on actual data from the plant, and comparison with global indices. Artificial neural networks are computational techniques that present a mathematical model inspired by the neural structure of intelligent organisms that acquire knowledge through experience. This paper proposes an artificial neural network model aimed at predicting values of goals to be used in the evaluation of safety performance indicators for nuclear power plants. (author)

Review of recycling performance indicators: a study on collection rate in Taiwan.

Science.gov (United States)

Wen, Lihchyi; Lin, Chun-Hsu; Lee, Soo-Cheol

2009-08-01

The Taiwan Environmental Protection Administration (Taiwan EPA) launched a national Extended Producer Responsibility (EPR) system after integrating eight private recycling organizations in 1998. After that, the environmental performance of the EPR system brought a lot of attention to policy makers. Many studies show positive environmental effects of the EPR system in Taiwan. However, there are controversial questions remained, such as whether the performance indicators used are the right choice to estimate the environmental effects of the recycling policy? Can those estimated results really reflect the performance of the system? This paper would therefore like to more accurately evaluate the performance indicators of the EPR system based on data observed over the past decade in Taiwan. In the process of evaluating the performance indicators, we have found that the collection rates for durable goods are often ignored in countries that pursue a zero waste policy. This may affect the actual recycling outcome and resource direction targeted by producers. However, in order for the collection rate to be adopted as a policy indicator, how to estimate the amounts of retired or waste products during a period is critical. In this paper, we estimate the collection rate for electrical and electronic waste by using the survival analysis and ownership data analysis approaches. We also provide a comparison of both approaches and put forward suggestions for directions in the future in solid waste management.

Review of recycling performance indicators: A study on collection rate in Taiwan

International Nuclear Information System (INIS)

Wen Lihchyi; Lin Chunhsu; Lee, Soo-cheol

2009-01-01

The Taiwan Environmental Protection Administration (Taiwan EPA) launched a national Extended Producer Responsibility (EPR) system after integrating eight private recycling organizations in 1998. After that, the environmental performance of the EPR system brought a lot of attention to policy makers. Many studies show positive environmental effects of the EPR system in Taiwan. However, there are controversial questions remained, such as whether the performance indicators used are the right choice to estimate the environmental effects of the recycling policy? Can those estimated results really reflect the performance of the system? This paper would therefore like to more accurately evaluate the performance indicators of the EPR system based on data observed over the past decade in Taiwan. In the process of evaluating the performance indicators, we have found that the collection rates for durable goods are often ignored in countries that pursue a zero waste policy. This may affect the actual recycling outcome and resource direction targeted by producers. However, in order for the collection rate to be adopted as a policy indicator, how to estimate the amounts of retired or waste products during a period is critical. In this paper, we estimate the collection rate for electrical and electronic waste by using the survival analysis and ownership data analysis approaches. We also provide a comparison of both approaches and put forward suggestions for directions in the future in solid waste management.

KEY PERFORMANCE INDICATORS. A CASE STUDY ON THE INTEGRATED REPORTS OF AN IT COMPANY

Directory of Open Access Journals (Sweden)

GORGAN CĂTĂLINA

2014-06-01

Full Text Available Our analysis relies on the 2011 integrated report published by SAP, a European IT company included in the International Integrated Reporting Committee (IIRC Pilot Programme Business Network. The research methodology used is the analysis of the content as we search for a number of selected characteristics in the report and also for a set of key performance indicators (KPI. We use as references the guide provided by DVFA (Society of Investment Professionals in Germany and EFFAS (European Federation of Financial Analysts Societies – EFFAS (2010 for the software industry. The aim of our study is to analyse the way in which an IT company applies the guidelines recognised by the European Commission to identify and communicate the material nonfinancial information, in order to assess the organization’s abilities to create value on a short, medium and long term.

Activation scheme to use performance indicators for the graded regulation on Korean NPPs

International Nuclear Information System (INIS)

Hwang, M. J.; Kang, D. I.; Kim, G. R.; Sung, G. Y.

2003-01-01

In this paper, we will provide an activation scheme of using performance indicators for graded regulation on Korean Nuclear Power Plants (NPPs). The safe operation of NPPs is the basic objective of nuclear society. To achieve the object, the direction of the regulation is established to regulate the risk of public health and safety. Therefore, it's essential to keep the safety of plants. However, it's not easy to define the appropriate safety level. So, the requirement of performance indicator establishment and framework establishment for safety management has been increased. Performance indicators can provide quantified safety value numerically. Therefore, we can increase the acceptance and trust of the public for safety of NPPs. Also, it helps pridictive regulation through the objective comparison of safety. Moreover, according to the importance of safety, we can allocate the resources effectively and lead an effort for the improvement of safety by comparison among nations and plants. The safety of a plant is affected by not only design but also the quality of operators, appropriate operation, maintenance and test. So, in this paper, we reviewed the application of performance indicators in domestic and foreign countries, and groped for a method to activate the use of performance indicators

EFFECTIVE INDICES FOR MONITORING MENTAL WORKLOAD WHILE PERFORMING MULTIPLE TASKS.

Science.gov (United States)

Hsu, Bin-Wei; Wang, Mao-Jiun J; Chen, Chi-Yuan; Chen, Fang

2015-08-01

This study identified several physiological indices that can accurately monitor mental workload while participants performed multiple tasks with the strategy of maintaining stable performance and maximizing accuracy. Thirty male participants completed three 10-min. simulated multitasks: MATB (Multi-Attribute Task Battery) with three workload levels. Twenty-five commonly used mental workload measures were collected, including heart rate, 12 HRV (heart rate variability), 10 EEG (electroencephalography) indices (α, β, θ, α/θ, θ/β from O1-O2 and F4-C4), and two subjective measures. Analyses of index sensitivity showed that two EEG indices, θ and α/θ (F4-C4), one time-domain HRV-SDNN (standard deviation of inter-beat intervals), and four frequency-domain HRV: VLF (very low frequency), LF (low frequency), %HF (percentage of high frequency), and LF/HF were sensitive to differentiate high workload. EEG α/θ (F4-C4) and LF/HF were most effective for monitoring high mental workload. LF/HF showed the highest correlations with other physiological indices. EEG α/θ (F4-C4) showed strong correlations with subjective measures across different mental workload levels. Operation strategy would affect the sensitivity of EEG α (F4-C4) and HF.

Indicators of Ceriodaphnia dubia chronic toxicity test performance and sensitivity

Energy Technology Data Exchange (ETDEWEB)

Rosebrock, M.M.; Bedwell, N.J.; Ausley, L.W. [North Carolina Division of Environmental Management, Raleigh, NC (United States)

1994-12-31

The North Carolina Division of Environmental Management has begun evaluation of the sensitivity of test results used for measuring chronic whole effluent toxicity in North Carolina wastewater discharges. Approximately 67% of 565 facilities required to monitor toxicity by an NPDES permit perform a Ceriodaphnia dubia chronic, single effluent concentration (pass/fail) analysis. Data from valid Ceriodaphnia dubia chronic pass/fail tests performed by approximately 20 certified biological laboratories and submitted by North Carolina NPDES permittees were recorded beginning January 1992. Control and treatment reproduction data from over 2,500 tests submitted since 1992 were analyzed to determine the minimum significant difference (MSD) at a 99% confidence level for each test and the percent reduction from the control mean that the MSD represents (%MSD) for each certified laboratory. Initial results for the 20 laboratories indicate that the average intralaboratory percent MSD ranges 12.72% (n = 367) to 34.91% (n = 7) with an average of 23.08%. Additionally, over 3,800 tests were analyzed to determine the coefficient of variation (CV) for control reproduction for each test and the average for each certified biological laboratory. Preliminary review indicates that average interlaboratory control reproduction CV values range from 10.59% (n = 367) to 31.08% (n = 572) with a mean of 20.35%. The statistics investigated are indicators of intra/interlaboratory performance and sensitivity of Ceriodaphnia chronic toxicity analyses.

Virtual Reality Simulation as a Tool to Monitor Surgical Performance Indicators: VIRESI Observational Study.

Science.gov (United States)

Muralha, Nuno; Oliveira, Manuel; Ferreira, Maria Amélia; Costa-Maia, José

2017-05-31

Virtual reality simulation is a topic of discussion as a complementary tool to traditional laparoscopic surgical training in the operating room. However, it is unclear whether virtual reality training can have an impact on the surgical performance of advanced laparoscopic procedures. Our objective was to assess the ability of the virtual reality simulator LAP Mentor to identify and quantify changes in surgical performance indicators, after LAP Mentor training for digestive anastomosis. Twelve surgeons from Centro Hospitalar de São João in Porto (Portugal) performed two sessions of advanced task 5: anastomosis in LAP Mentor, before and after completing the tutorial, and were evaluated on 34 surgical performance indicators. The results show that six surgical performance indicators significantly changed after LAP Mentor training. The surgeons performed the task significantly faster as the median 'total time' significantly reduced (p virtual reality training simulation as a benchmark tool to assess the surgical performance of Portuguese surgeons. LAP Mentor is able to identify variations in surgical performance indicators of digestive anastomosis.

Reproducibility indices applied to cervical pressure pain threshold measurements in healthy subjects.

Science.gov (United States)

Prushansky, Tamara; Dvir, Zeevi; Defrin-Assa, Ruth

2004-01-01

To apply various statistical indices for reproducibility analysis of pressure pain threshold measurements and to derive a preferred pressure pain threshold measurement protocol based on these indices. The pressure pain threshold of 3 pairs of right and left homologous cervical region sites were measured in 20 healthy subjects (10 women, 10 men) using a hand-held pressure algometer. Measurements took place on 2 occasions (test 1 and test 2) separated by a mean interval of 1 week. On each testing session, the site-related pressure pain thresholds were measured 3 times each according to 2 different protocols. Protocol A consisted of a repetitive order, namely 3 consecutive measurements at each site before proceeding to the next, whereas protocol B consisted of an alternate order in which 3 consecutive rounds of all individually tested sites took place. For test 1, protocol A was followed by protocol B with an hour interval. For test 2, the reverse order took place. The findings revealed no significant differences between the two protocols and indicated a significant rise (P test 1 to test 2 in both protocols. Absolute values (mean +/-SD) derived from the entire sample of pressure pain threshold sites ranged from 140 +/- 60 to 198.7 +/- 95 kPa (1.60 +/- 0.6 to 1.99 +/- 0.95 kg/cm, respectively). No significant gender or side differences were noted. Pearson r as well as the intraclass correlation coefficient revealed good to excellent reproducibility for both protocols and for all sites measured: r = 0.79-0.94 and intraclass correlation coefficient(3,3) = 0.85-0.96, respectively. To define site-specific cutoff values indicating change at the 95% confidence level, 1.96*SEM was calculated, and its values ranged from 31.6 to 58.2 kPa, which correspond to 16.8% to 32.8% of the absolute mean values. In addition, the limits of agreement, which depict the individual test-retest differences relative to their mean, indicated a heteroscedastic trend. The two protocols yielded

Application of balanced score card in the development of performance indicator system in nuclear power plant

International Nuclear Information System (INIS)

Shen Shuguang; Huang Fang; Fang Zhaoxia

2013-01-01

Performance indicator, which is one of ten performance monitoring tools recommended by WANO performance improvement model, has become an effective tool for performance improvement of nuclear power plant. At present, performance indicator system has been built in nuclear power plant. However, how to establish the performance indicator system that is reasonable and applicable for plant is still a question to be discussed. Performance indictor is closely tied to the strategic direction of a corporation by a balanced score card, and the performance indicator system is established from the point of performance management and strategic development. The performance indicator system of nuclear power plant is developed by introducing the balanced score card, and can be as a reference for other domestic nuclear power plants. (authors)

A critical cluster analysis of 44 indicators of author-level performance

DEFF Research Database (Denmark)

Wildgaard, Lorna Elizabeth

2015-01-01

. Publication and citation data for 741 researchers across Astronomy, Environmental Science, Philosophy and Public Health was collected in Web of Science (WoS). Forty-four indicators of individual performance were computed using the data. A two-step cluster analysis using IBM SPSS version 22 was performed...

HEALTH INDICATORS IN SCHOOL: ASSESSMENT OF NUTRITIONAL STATUS AND MOTOR PERFORMANCE

Directory of Open Access Journals (Sweden)

Andressa Ribeiro Contreira

2013-11-01

Full Text Available Objective: This study aimed to investigate the relationship among motor performance and nutritional status in students. Methods: Attended by 27 adolescents of both sexes, aged between 11-13 years (average 11.74 ± 0.70 years from a private school in Florianópolis/SC. The motor performance was assessed using the MABC-2. For assess the nutritional status was used the BMI calculus. Results: Among 27 participants, 6 had a risk / indicative of motor difficulties and 9 had overweight. The vast majority of participants had adequate height for age. There was negative significant statistically correlation, but moderate, among BMI and total performance in the MABC-2, indicating that as higher the BMI, worse is the motor performance. Conclusion: Based on these results and the literature, it is suggested that in addition to the identification of children with overweight and motor difficulties, programs targeted physical activity and motor interventions are implemented, especially in the school environment, aiming to maintain the health conditions.

Prioritizing Public- Private Partnership Models for Public Hospitals of Iran Based on Performance Indicators

Directory of Open Access Journals (Sweden)

Mohammad Asghari Jaafarabadi

2012-12-01

Full Text Available Background: The present study was conducted to scrutinize Public- Private Partnership (PPP models in public hospitals of different countries based on performance indicators in order to se-lect appropriated models for Iran hospitals.Methods: In this mixed (quantitative-qualitative study, systematic review and expert panel hasbeen done to identify varied models of PPP as well as performance indicators. In the second stepwe prioritized performance indicator and PPP models based on selected performance indicatorsby Analytical Hierarchy process (AHP technique. The data were analyzed by Excel 2007 andExpert Choice11 software’s.Results: In quality – effectiveness area, indicators like the rate of hospital infections(100%, hospital accidents prevalence rate (73%, pure rate of hospital mortality (63%, patientsatisfaction percentage (53%, in accessibility equity area indicators such as average inpatientwaiting time (100% and average outpatient waiting time (74%, and in financial – efficiency area,indicators including average length of stay (100%, bed occupation ratio (99%, specific incometo total cost ratio (97% have been chosen to be the most key performance indicators. In the prioritizationof the PPP models clinical outsourcing, management, privatization, BOO (build, own,operate and non-clinical outsourcing models, achieved high priority for various performance indicatorareas.Conclusion: This study had been provided the most common PPP options in the field of public hospitals and had gathered suitable evidences from experts for choosing appropriate PPP option for public hospitals. Effect of private sector presence in public hospital performance, based on which PPP options undertaken, will be different.

Protein Detection Using the Multiplexed Proximity Extension Assay (PEA) from Plasma and Vaginal Fluid Applied to the Indicating FTA Elute Micro Card™

Science.gov (United States)

Berggrund, Malin; Ekman, Daniel; Gustavsson, Inger; Sundfeldt, Karin; Olovsson, Matts; Enroth, Stefan; Gyllensten, Ulf

2016-01-01

The indicating FTA elute micro card™ has been developed to collect and stabilize the nucleic acid in biological samples and is widely used in human and veterinary medicine and other disciplines. This card is not recommended for protein analyses, since surface treatment may denature proteins. We studied the ability to analyse proteins in human plasma and vaginal fluid as applied to the indicating FTA elute micro card™ using the sensitive proximity extension assay (PEA). Among 92 proteins in the Proseek Multiplex Oncology Iv2 panel, 87 were above the limit of detection (LOD) in liquid plasma and 56 among 92 above LOD in plasma applied to FTA cards. Washing and protein elution protocols were compared to identify an optimal method. Liquid-based cytology samples showed a lower number of proteins above LOD than FTA cards with vaginal fluid samples applied. Our results demonstrate that samples applied to the indicating FTA elute micro card™ are amendable to protein analyses, given that a sensitive protein detection assay is used. The results imply that biological samples applied to FTA cards can be used for DNA, RNA and protein detection. PMID:28936257

Protein Detection Using the Multiplexed Proximity Extension Assay (PEA from Plasma and Vaginal Fluid Applied to the Indicating FTA Elute Micro Card™

Directory of Open Access Journals (Sweden)

Malin Berggrund

2016-01-01

Full Text Available The indicating FTA elute micro card™ has been developed to collect and stabilize the nucleic acid in biological samples and is widely used in human and veterinary medicine and other disciplines. This card is not recommended for protein analyses, since surface treatment may denature proteins. We studied the ability to analyse proteins in human plasma and vaginal fluid as applied to the indicating FTA elute micro card™ using the sensitive proximity extension assay (PEA. Among 92 proteins in the Proseek Multiplex Oncology Iv2 panel, 87 were above the limit of detection (LOD in liquid plasma and 56 among 92 above LOD in plasma applied to FTA cards. Washing and protein elution protocols were compared to identify an optimal method. Liquid-based cytology samples showed a lower number of proteins above LOD than FTA cards with vaginal fluid samples applied. Our results demonstrate that samples applied to the indicating FTA elute micro card™ are amendable to protein analyses, given that a sensitive protein detection assay is used. The results imply that biological samples applied to FTA cards can be used for DNA, RNA and protein detection.

Protein Detection Using the Multiplexed Proximity Extension Assay (PEA) from Plasma and Vaginal Fluid Applied to the Indicating FTA Elute Micro Card™.

Science.gov (United States)

Berggrund, Malin; Ekman, Daniel; Gustavsson, Inger; Sundfeldt, Karin; Olovsson, Matts; Enroth, Stefan; Gyllensten, Ulf

2016-01-01

The indicating FTA elute micro card™ has been developed to collect and stabilize the nucleic acid in biological samples and is widely used in human and veterinary medicine and other disciplines. This card is not recommended for protein analyses, since surface treatment may denature proteins. We studied the ability to analyse proteins in human plasma and vaginal fluid as applied to the indicating FTA elute micro card™ using the sensitive proximity extension assay (PEA). Among 92 proteins in the Proseek Multiplex Oncology Iv2 panel, 87 were above the limit of detection (LOD) in liquid plasma and 56 among 92 above LOD in plasma applied to FTA cards. Washing and protein elution protocols were compared to identify an optimal method. Liquid-based cytology samples showed a lower number of proteins above LOD than FTA cards with vaginal fluid samples applied. Our results demonstrate that samples applied to the indicating FTA elute micro card™ are amendable to protein analyses, given that a sensitive protein detection assay is used. The results imply that biological samples applied to FTA cards can be used for DNA, RNA and protein detection.

Developing biodiversity indicators on a stakeholders' opinions basis: the gypsum industry Key Performance Indicators framework.

Science.gov (United States)

Pitz, Carline; Mahy, Grégory; Vermeulen, Cédric; Marlet, Christine; Séleck, Maxime

2016-07-01

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.

Predicting the outcomes of performance error indicators on accreditation status in the nuclear power industry

International Nuclear Information System (INIS)

Wilson, P.A.

1986-01-01

The null hypothesis for this study suggested that there was no significant difference in the types of performance error indicators between accredited and non-accredited programs on the following types of indicators: (1) number of significant event reports per unit, (2) number of forced outages per unit, (3) number of unplanned automatic scrams per unit, and (4) amount of equivalent availability per unit. A sample of 90 nuclear power plants was selected for this study. Data were summarized from two data bases maintained by the Institute of Nuclear Power Operations. Results of this study did not support the research hypothesis. There was no significant difference between the accredited and non-accredited programs on any of the four performance error indicators. The primary conclusions of this include the following: (1) The four selected performance error indicators cannot be used individually or collectively to predict accreditation status in the nuclear power industry. (2) Annual performance error indicator ratings cannot be used to determine the effects of performance-based training on plant performance. (3) The four selected performance error indicators cannot be used to measure the effect of operator job performance on plant effectiveness

Development and utilization of indicators to summarize and represent performance of nuclear power plants

International Nuclear Information System (INIS)

Kawaguchi, Hiroshi; Kakubari, Yukihiro; Kikkawa, Shigeru

1996-01-01

We have developed eight performance indicators (PIs) that enable quantitative and overall comprehension of operating performance. Among these eight indicators there are 'capability factor' 'incidents and failures' and 'radiation exposure and radioactive wastes', all used to represent the safety and reliability of a nuclear power plant. Results of analysis and evaluation by means of these PIs are distributed to the regulatory agency and other organizations every year, for the benefit of all involved. We have also been examining a technique that may allow synthesis of these PIs into a single, simpler comprehensive indicator that covers all aspects of plant performance. In this report, we present analysis and evaluation of the PIs, the technique to provide a comprehensive performance indicators and actual application. (author)

Swimming and other activities: applied aspects of fish swimming performance

Science.gov (United States)

Castro-Santos, Theodore R.; Farrell, A.P.

2011-01-01

Human activities such as hydropower development, water withdrawals, and commercial fisheries often put fish species at risk. Engineered solutions designed to protect species or their life stages are frequently based on assumptions about swimming performance and behaviors. In many cases, however, the appropriate data to support these designs are either unavailable or misapplied. This article provides an overview of the state of knowledge of fish swimming performance – where the data come from and how they are applied – identifying both gaps in knowledge and common errors in application, with guidance on how to avoid repeating mistakes, as well as suggestions for further study.

Analysis of international approaches which are used at development of theoperational safety performance indicators

International Nuclear Information System (INIS)

Lyigots'kij, O.Yi.; Nosovs'kij, A.V.; Chemeris, Yi.O.

2009-01-01

Description of international approaches and experience of the use of theoperational safety performance indicators system is provided for estimationof current status and making a decision on corrections in the operationpractice. The state of development of the operational safety performanceindicators system by the operating organization is overviewed. Thepossibility of application of international approaches during development ofthe integral safety performance indicators system is analyzed. Aims and tasksof future researches are formulated in relation to development of theintegral safety performance indicators system.

How Are You Doing? Key Performance Indicators and Benchmarking

Science.gov (United States)

Fahey, John P.

2011-01-01

School business officials need to "know and show" that their operations are well managed. To do so, they ask themselves questions, such as "How are they doing? How do they compare with others? Are they making progress fast enough? Are they using the best practices?" Using key performance indicators (KPIs) and benchmarking as regular parts of their…

Students as Employees: Applying Performance Management Principles in the Management Classroom

Science.gov (United States)

Gillespie, Treena L.; Parry, Richard O.

2009-01-01

The student-as-employee metaphor emphasizes student accountability and participation in learning and provides instructors with work-oriented methods for creating a productive class environment. The authors propose that the tenets of performance management in work organizations can be applied to the classroom. In particular, they focus on three…

Joint impact of ERP systems and non financial performance indicators on corporate financial performance: Evidence from French listed companies

Directory of Open Access Journals (Sweden)

Ahmed Kouki

2015-01-01

Full Text Available This paper aims to examine the joint impact of Enterprise Resource Planning systems (ERP systems and Non Financial Performance Indicators (NFPI on corporate financial performance. Our study is based on a comparative analysis between firms that adopt ERP only, firms that use NFPI only and firms that combining both strategies (ERP and NFPI during the period from 2001 to 2006.The implementation process remains highly uncertain. In fact, the use of Non Financial performance indicators is an important determinant of corporate financial performance. At the operational level, combining ERP systems with NFPI reflects a long-term business strategy to improve business process. In summary, the ERP and NFPI literatures demonstrate the vital importance of aligning business process, information technologies and key performance indicators with the strategic objectives of the firm. Results support the hypothesis in which firms that combining ERP and NFPI have significantly higher ROA than either ERP-only or NFPI-only firms.

Extra-analytical quality indicators and laboratory performances.

Science.gov (United States)

Sciacovelli, Laura; Aita, Ada; Plebani, Mario

2017-07-01

In the last few years much progress has been made in raising the awareness of laboratory medicine professionals about the effectiveness of quality indicators (QIs) in monitoring, and improving upon, performances in the extra-analytical phases of the Total Testing Process (TTP). An effective system for management of QIs includes the implementation of an internal assessment system and participation in inter-laboratory comparison. A well-designed internal assessment system allows the identification of critical activities and their systematic monitoring. Active participation in inter-laboratory comparison provides information on the performance level of one laboratory with respect to that of other participating laboratories. In order to guarantee the use of appropriate QIs and facilitate their implementation, many laboratories have adopted the Model of Quality Indicators (MQI) proposed by Working Group "Laboratory Errors and Patient Safety" (WG-LEPS) of IFCC, since 2008, which is the result of international consensus and continuous experimentation, and updating to meet new, constantly emerging needs. Data from participating laboratories are collected monthly and reports describing the statistical results and evaluating laboratory data, utilizing the Six Sigma metric, issued regularly. Although the results demonstrate that the processes need to be improved upon, overall the comparison with data collected in 2014 shows a general stability of quality levels and that an improvement has been achieved over time for some activities. The continuous monitoring of QI data allows identification all possible improvements, thus highlighting the value of participation in the inter-laboratory program proposed by WG-LEPS. The active participation of numerous laboratories will guarantee an ever more significant State-of-the-Art, promote the reduction of errors and improve quality of the TTP, thus guaranteeing patient safety. Copyright © 2017. Published by Elsevier Inc.

Analytic network process model for sustainable lean and green manufacturing performance indicator

Science.gov (United States)

Aminuddin, Adam Shariff Adli; Nawawi, Mohd Kamal Mohd; Mohamed, Nik Mohd Zuki Nik

2014-09-01

Sustainable manufacturing is regarded as the most complex manufacturing paradigm to date as it holds the widest scope of requirements. In addition, its three major pillars of economic, environment and society though distinct, have some overlapping among each of its elements. Even though the concept of sustainability is not new, the development of the performance indicator still needs a lot of improvement due to its multifaceted nature, which requires integrated approach to solve the problem. This paper proposed the best combination of criteria en route a robust sustainable manufacturing performance indicator formation via Analytic Network Process (ANP). The integrated lean, green and sustainable ANP model can be used to comprehend the complex decision system of the sustainability assessment. The finding shows that green manufacturing is more sustainable than lean manufacturing. It also illustrates that procurement practice is the most important criteria in the sustainable manufacturing performance indicator.

The implications of financial performance on stock exchange indicators of listed companies: empirical evidence for the Romanian capital market

Directory of Open Access Journals (Sweden)

Iulia-Oana ȘTEFAN(BELCIC-ȘTEFAN

2016-08-01

Full Text Available This paper examines and quantifies the implications of financial indicators of performance on the share return of companies listed on Bucharest Stock Exchange. These implications are even more relevant as the Romanian capital market could benefit from increased visibility with its reclassification as an emerging capital market in the near future. The research is conducted at the level of 33 companies listed on BSE for the time frame 2011-2013, building a multiple linear regression model that quantifies the variation in price to book value depending on the evolution of nine financial indicators of performance out of a total of 38 such possible indicators. Correcting the effects of serial correlation within the model led to its respecification resorting to the generalized differences procedure. The value of the R-squared coefficient of determination for the processed model is 0.543, eight of the nine independent variables being significant at the 1% level. The 0 probability associated to the F-test as well as its value confirm that the regression equation is globally significant. Also, all the assumptions for validating the estimated model are confirmed, both general ones, characteristic to the multiple linear regression procedure, and, in particular, according to the specific set of data under processing. The applied usefulness of the regression model is valued in the next step of the research, that of testing the effectiveness of the Romanian capital market, after which it was found that the influence of financial performance indicators was already incorporated into the market price since the end of the reporting period.

A decision support model for identification and prioritization of key performance indicators in the logistics industry

OpenAIRE

Kucukaltan, Berk; Irani, Zahir; Aktas, Emel

2016-01-01

Performance measurement of logistics companies is based upon various performance indicators. Yet, in the logistics industry, there are several vaguenesses, such as deciding on key indicators and determining interrelationships between performance indicators. In order to resolve these vaguenesses, this paper first presents the stakeholder-informed Balanced Scorecard (BSC) model, by incorporating financial (e.g. cost) and non-financial (e.g. social media) performance indicators, with a comprehen...

The development of an effective performance indicator program aids management effectiveness

International Nuclear Information System (INIS)

Kelm, R.R.

1989-01-01

One problem that has plagued nuclear security departments has been the failure to adequately develop accurate and effective means of tracking and trending computer-based security system performance data at nuclear power facilities. The purpose of this paper is twofold: to provide information on the development and uses of one system employed by the Detroit Edison Company that has proven to be an effective performance indicator system to track security system data and to explain how management makes use of the system data. The performance indicator system has had a remarkable effect on the department's performance. The system's users have become more effective in isolating problems with security system components. The data have been utilized as part of the cost/benefit analysis for justifying improvements or equipment upgrades, clearly documenting cost savings. Finally, security management at all levels is able to promptly identify individual problems or trends. The time, money, and hours devoted to system development have greatly contributed to Detroit Edison's nuclear security department achieving a SALP 1 rating

Analytical Performance Verification of FCS-MPC Applied to Power Electronic Converters

DEFF Research Database (Denmark)

Novak, Mateja; Dragicevic, Tomislav; Blaabjerg, Frede

2017-01-01

Since the introduction of finite control set model predictive control (FCS-MPC) in power electronics the algorithm has been missing an important aspect that would speed up its implementation in industry: a simple method to verify the algorithm performance. This paper proposes to use a statistical...... model checking (SMC) method for performance evaluation of the algorithm applied to power electronics converters. SMC is simple to implement, intuitive and it requires only an operational model of the system that can be simulated and checked against properties. Device under test for control algorithm...

Using vulnerability performance indicators to attain food supply chain robustness

NARCIS (Netherlands)

Vlajic, J.V.; Lokven, van S.W.M.; Haijema, R.; Vorst, van der J.G.A.J.

2013-01-01

High effectiveness and leanness of modern supply chains (SCs) increase their vulnerability, i.e. susceptibility to disturbances reflected in non-robust SC performances. Both the SC management literature and SC professionals indicate the need for the development of SC vulnerability assessment tools.

Selecting and applying indicators of ecosystem collapse for risk assessments.

Science.gov (United States)

Rowland, Jessica A; Nicholson, Emily; Murray, Nicholas J; Keith, David A; Lester, Rebecca E; Bland, Lucie M

2018-03-12

Ongoing ecosystem degradation and transformation are key threats to biodiversity. Measuring ecosystem change towards collapse relies on monitoring indicators that quantify key ecological processes. Yet little guidance is available on selecting and implementing indicators for ecosystem risk assessment. Here, we reviewed indicator use in ecological studies of decline towards collapse in marine pelagic and temperate forest ecosystems. We evaluated the use of indicator selection methods, indicator types (geographic distribution, abiotic, biotic), methods of assessing multiple indicators, and temporal quality of time series. We compared these ecological studies to risk assessments in the International Union for the Conservation of Nature Red List of Ecosystems (RLE), where indicators are used to estimate ecosystem collapse risk. We found that ecological studies and RLE assessments rarely reported how indicators were selected, particularly in terrestrial ecosystems. Few ecological studies and RLE assessments quantified ecosystem change with all three indicator types, and indicators types used varied between marine and terrestrial ecosystem. Several studies used indices or multivariate analyses to assess multiple indicators simultaneously, but RLE assessments did not, as RLE guidelines advise against them. Most studies and RLE assessments used time series spanning at least 30 years, increasing the chance of reliably detecting change. Limited use of indicator selection protocols and infrequent use of all three indicator types may hamper the ability to accurately detect changes. To improve the value of risk assessments for informing policy and management, we recommend using: (i) explicit protocols, including conceptual models, to identify and select indicators; (ii) a range of indicators spanning distributional, abiotic and biotic features; (iii) indices and multivariate analyses with extreme care until guidelines are developed; (iv) time series with sufficient data to

A Target-Lighted dsDNA-Indicator for High-Performance Monitoring of Mercury Pollution and Its Antagonists Screening.

Science.gov (United States)

Qing, Zhihe; Zhu, Lixuan; Li, Xiaoxuan; Yang, Sheng; Zou, Zhen; Guo, Jingru; Cao, Zhong; Yang, Ronghua

2017-10-17

As well-known, the excessive discharge of heavy-metal mercury not only destroys the ecological environment, bust also leads to severe damage of human health after ingestion via drinking and bioaccumulation of food chains, and mercury ion (Hg 2+ ) is designated as one of most prevalent toxic metal ions in drinking water. Thus, the high-performance monitoring of mercury pollution is necessary. Functional nucleic acids have been widely used as recognition probes in biochemical sensing. In this work, a carbazole derivative, ethyl-4-[3,6-bis(1-methyl-4-vinylpyridium iodine)-9H-carbazol -9-yl)] butanoate (EBCB), has been synthesized and found as a target-lighted DNA fluorescent indicator. As a proof-of-concept, Hg 2+ detection was carried out based on EBCB and Hg 2+ -mediated conformation transformation of a designed DNA probe. By comparison with conventional nucleic acid indicators, EBCB held excellent advantages, such as minimal background interference and maximal sensitivity. Outstanding detection capabilities were displayed, especially including simple operation (add-and-read manner), ultrarapidity (30 s), and low detection limit (0.82 nM). Furthermore, based on these advantages, the potential for high-performance screening of mercury antagonists was also demonstrated by the fluorescence change of EBCB. Therefore, we believe that this work is meaningful in pollution monitoring, environment restoration and emergency treatment, and may pave a way to apply EBCB as an ideal signal transducer for development of high-performance sensing strategies.

Measuring the effects of visual demand on lateral deviation: a comparison among driver's performance indicators.

Science.gov (United States)

Minin, Luca; Benedetto, Simone; Pedrotti, Marco; Re, Alessandra; Tesauri, Francesco

2012-05-01

In this study we compare the efficacy of three driver's performance indicators based on lateral deviation in detecting significant on-road performance degradations while interacting with a secondary task: the High Frequency Component of steering wheel (HFC), and two indicators described in ISO/DIS 26022 (2007): the Normative and the Adapted Lane Change Test (LCT). Sixteen participants were asked to perform a simulated lane-change task while interacting, when required, with a visual search task with two levels of difficulty. According to predictions, results showed that the Adapted LCT indicator, taking into consideration individual practices in performing the LCT, succeeded in discriminating between single and dual task conditions. Furthermore, this indicator was also able to detect whether the driver was interacting with an easy or a difficult secondary task. Despite predictions, results did not confirm Normative LCT and HFC to be reliable indicators of performance degradation within the simulated LCT. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An Integrated MCDM Method in Ranking BSC Perspectives and key Performance Indicators (KPIs

Directory of Open Access Journals (Sweden)

Mohsen Alvandi

2012-04-01

Full Text Available The balanced scorecard (BSC approach is an effective technique for performance evaluation. BSC can better reflect the dependence and feedback problems of each factor in real world situations. This study aims at developing a set of appropriate key performance indicators according to (BSC approach for SAPCO using multiple criteria decision making(MCDM method. We provide key performance indicators through literature reviews and experts' idea in SAPCO, which is one of the biggest vehicle spare suppliers in Iran. The proposed study uses decision making trial and evaluation laboratory (DEMATEL and analytic network process (ANP, respectively to measure the casual relationship between the perspectives as well as the relative weights. The results based on ANP method shows that ‘‘Customer’’ is the most influential factor. In addition, internal process, financial and learning and growth are in two to four positions. Three important key performance indicators are as bellow: Total price of parts, Customer satisfaction and Lack of parts in production.

LEADING WITH LEADING INDICATORS

International Nuclear Information System (INIS)

PREVETTE, S.S.

2005-01-01

This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites

The development and evaluation of programmatic performance indicators associated with maintenance at nuclear power plants

International Nuclear Information System (INIS)

Wreathall, J.; Fragola, J.; Appignani, P.; Burlile, G.; Shen, Y.

1990-05-01

This report summarizes the development and evaluation of programmatic performance indicators of maintenance. These indicators were selected by: (1) creating a formal framework of plant processes; (2) identifying features of plant behavior considered important to safety; (3) evaluating existing indicators against these features; and (4) performing statistical analyses for the selected indicators. The report recommends additional testing. 32 refs., 29 figs., 11 tabs

A study on regional comprehensive performance evaluation indicator system of rational use of drugs

Directory of Open Access Journals (Sweden)

Sun Tongda

2017-01-01

Full Text Available The current research presents the design of a 4-degree-3-level performance evaluation indicator system of rational use of drugs for health care institutions accord with the Balanced Score Card (BSC method. Financial index, patient index, professional process index, and development and blazing new trials index are adopted in the light of scientific, guiding, operable and generalizable principles. The index weight is based on the analytic hierarchy process, and comprehensive performance evaluation indicators are calculated by a linear integrated weighting method. Its practical application in 21 state-run health care institutions in Ningbo, from 2008 to 2012, has arrived at the finding that the comprehensive performance evaluation indicator system offers a scientific, practical and effective performance management quantification and is thus worth popularizing.

Key team physical and technical performance indicators indicative of team quality in the soccer Chinese super league.

Science.gov (United States)

Yang, Gai; Leicht, Anthony S; Lago, Carlos; Gómez, Miguel-Ángel

2018-01-01

The aim of this study was to identify the key physical and technical performance variables related to team quality in the Chinese Super League (CSL). Teams' performance variables were collected from 240 matches and analysed via analysis of variance between end-of-season-ranked groups and multinomial logistic regression. Significant physical performance differences between groups were identified for sprinting (top-ranked group vs. upper-middle-ranked group) and total distance covered without possession (upper and upper-middle-ranked groups and lower-ranked group). For technical performance, teams in the top-ranked group exhibited a significantly greater amount of possession in opponent's half, number of entry passes in the final 1/3 of the field and the Penalty Area, and 50-50 challenges than lower-ranked teams. Finally, time of possession increased the probability of a win compared with a draw. The current study identified key performance indicators that differentiated end-season team quality within the CSL.

Identifying key performance indicators for nursing and midwifery care using a consensus approach.

Science.gov (United States)

McCance, Tanya; Telford, Lorna; Wilson, Julie; Macleod, Olive; Dowd, Audrey

2012-04-01

The aim of this study was to gain consensus on key performance indicators that are appropriate and relevant for nursing and midwifery practice in the current policy context. There is continuing demand to demonstrate effectiveness and efficiency in health and social care and to communicate this at boardroom level. Whilst there is substantial literature on the use of clinical indicators and nursing metrics, there is less evidence relating to indicators that reflect the patient experience. A consensus approach was used to identify relevant key performance indicators. A nominal group technique was used comprising two stages: a workshop involving all grades of nursing and midwifery staff in two HSC trusts in Northern Ireland (n = 50); followed by a regional Consensus Conference (n = 80). During the workshop, potential key performance indicators were identified. This was used as the basis for the Consensus Conference, which involved two rounds of consensus. Analysis was based on aggregated scores that were then ranked. Stage one identified 38 potential indicators and stage two prioritised the eight top-ranked indicators as a core set for nursing and midwifery. The relevance and appropriateness of these indicators were confirmed with nurses and midwives working in a range of settings and from the perspective of service users. The eight indicators identified do not conform to the majority of other nursing metrics generally reported in the literature. Furthermore, they are strategically aligned to work on the patient experience and are reflective of the fundamentals of nursing and midwifery practice, with the focus on person-centred care. Nurses and midwives have a significant contribution to make in determining the extent to which these indicators are achieved in practice. Furthermore, measurement of such indicators provides an opportunity to evidence of the unique impact of nursing/midwifery care on the patient experience. © 2011 Blackwell Publishing Ltd.

Evaluating the use of key performance indicators to evidence the patient experience.

Science.gov (United States)

McCance, Tanya; Hastings, Jack; Dowler, Hilda

2015-11-01

To test eight person-centred key performance indicators and the feasibility of an appropriate measurement framework as an approach to evidencing the patient experience. The value of measuring the quality of patient care is undisputed in the international literature, however, the type of measures that can be used to generate data that is meaningful for practice continues to be debated. This paper offers a different perspective to the 'measurement' of the nursing and midwifery contribution to the patient experience. Fourth generation evaluation was the methodological approach used to evaluate the implementation of the key performance indicators and measurement framework across three participating organisations involving nine practice settings. Data were collected by repeated use of claims, concerns and issues with staff working across nine participating sites (n = 18) and the senior executives from the three partner organisations (n = 12). Data were collected during the facilitated sessions with stakeholders and analysed in conjunction with the data generated from the measurement framework. The data reveal the inherent value placed on the evidence generated from the implementation of the key performance indicators as reflected in the following themes: measuring what matters; evidencing the patient experience; engaging staff; a focus for improving practice; and articulating and demonstrating the positive contribution of nursing and midwifery. The implementation of the key performance indicators and the measurement framework has been effective in generating evidence that demonstrates the patient experience. The nature of the data generated not only privileges the patient voice but also offers feedback to nurses and midwives that can inform the development of person-centred cultures. The use of these indicators will produce evidence of patient experience that can be used by nurse and midwives to celebrate and further inform person-centred practice. © 2015 John

Comparison of five cluster validity indices performance in brain [18 F]FET-PET image segmentation using k-means.

Science.gov (United States)

Abualhaj, Bedor; Weng, Guoyang; Ong, Melissa; Attarwala, Ali Asgar; Molina, Flavia; Büsing, Karen; Glatting, Gerhard

2017-01-01

Dynamic [ 18 F]fluoro-ethyl-L-tyrosine positron emission tomography ([ 18 F]FET-PET) is used to identify tumor lesions for radiotherapy treatment planning, to differentiate glioma recurrence from radiation necrosis and to classify gliomas grading. To segment different regions in the brain k-means cluster analysis can be used. The main disadvantage of k-means is that the number of clusters must be pre-defined. In this study, we therefore compared different cluster validity indices for automated and reproducible determination of the optimal number of clusters based on the dynamic PET data. The k-means algorithm was applied to dynamic [ 18 F]FET-PET images of 8 patients. Akaike information criterion (AIC), WB, I, modified Dunn's and Silhouette indices were compared on their ability to determine the optimal number of clusters based on requirements for an adequate cluster validity index. To check the reproducibility of k-means, the coefficients of variation CVs of the objective function values OFVs (sum of squared Euclidean distances within each cluster) were calculated using 100 random centroid initialization replications RCI 100 for 2 to 50 clusters. k-means was performed independently on three neighboring slices containing tumor for each patient to investigate the stability of the optimal number of clusters within them. To check the independence of the validity indices on the number of voxels, cluster analysis was applied after duplication of a slice selected from each patient. CVs of index values were calculated at the optimal number of clusters using RCI 100 to investigate the reproducibility of the validity indices. To check if the indices have a single extremum, visual inspection was performed on the replication with minimum OFV from RCI 100 . The maximum CV of OFVs was 2.7 × 10 -2 from all patients. The optimal number of clusters given by modified Dunn's and Silhouette indices was 2 or 3 leading to a very poor segmentation. WB and I indices suggested in

Performance Evaluation of Spectral Clustering Algorithm using Various Clustering Validity Indices

OpenAIRE

M. T. Somashekara; D. Manjunatha

2014-01-01

In spite of the popularity of spectral clustering algorithm, the evaluation procedures are still in developmental stage. In this article, we have taken benchmarking IRIS dataset for performing comparative study of twelve indices for evaluating spectral clustering algorithm. The results of the spectral clustering technique were also compared with k-mean algorithm. The validity of the indices was also verified with accuracy and (Normalized Mutual Information) NMI score. Spectral clustering algo...

Expert opinions and scientific evidence for colonoscopy key performance indicators.

Science.gov (United States)

Rees, Colin J; Bevan, Roisin; Zimmermann-Fraedrich, Katharina; Rutter, Matthew D; Rex, Douglas; Dekker, Evelien; Ponchon, Thierry; Bretthauer, Michael; Regula, Jaroslaw; Saunders, Brian; Hassan, Cesare; Bourke, Michael J; Rösch, Thomas

2016-12-01

Colonoscopy is a widely performed procedure with procedural volumes increasing annually throughout the world. Many procedures are now performed as part of colorectal cancer screening programmes. Colonoscopy should be of high quality and measures of this quality should be evidence based. New UK key performance indicators and quality assurance standards have been developed by a working group with consensus agreement on each standard reached. This paper reviews the scientific basis for each of the quality measures published in the UK standards. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

STATUS BERKELANJUTAN KOTA TANGERANG SELATAN-BANTEN DENGAN MENGGUNAKAN KEY PERFORMANCE INDICATORS (Sustainable Status of South Tangerang City-Banten Using Key Performance Indicators

Directory of Open Access Journals (Sweden)

Heri Apriyanto

2015-07-01

Full Text Available ABSTRAK Pembangunan kota yang tidak terkendali akan mengakibatkan tekanan terhadap lingkungan dan beban masyarakat meningkat, sebaliknya degradasi lingkungan akan mengakibatkan pembatasan pengembangan ekonomi dan penurunan kualitas hidup. Guna mencegah terjadinya dampak-dampak negatif, maka diperlukan prinsip-prinsip pembangunan kota yang berkelanjutan. Evaluasi terhadap pelaksanan pembangunan kota yang berkelanjutan perlu dilakukan untuk mengetahui apakah pembangunan suatu kota sudah atau belum/tidak berkelanjutan. Penelitian ini bertujuan untuk menyusun Key Performance Indicators (KPI guna menilai status pembangunan kota berkelanjutan. Perumusan KPI ini dilakukan dengan pendekatan Analytic Hierarchy Process (AHP. KPI yang dihasilkan terdiri dari 21 indikator dan 9 elemen dari 3 pilar pembangunan berkelanjutan (ekonomi, sosial, dan lingkungan. Implementasi KPI dilakukan untuk pengukuran status keberlanjutan Kota Tangerang Selatan. Hasil pengukuran menunjukkan bahwa kota ini termasuk dalam tahap awal pembangunan berkelanjutan. Secara umum perkembangan ekonomi dan sosial relatif cukup baik, namun tidak demikian dengan kondisi lingkungannya. ABSTRACT Uncontrolled urban development will result in pressure on the environment and the burden of the people. On the contrary, environmental degradation will lead to restricted economic development and decreased quality of life. In order to prevent negative impacts, it is necessary to implement the principles of sustainable city development. Evaluation of the implementation of sustainable city development is needed to determine whether the development of a city is sustainable or not. This study aimed to develop Key Performance Indicators (KPI to assess the status of sustainable city development. The formulation of KPI is done with Analytic Hierarchy Process (AHP. KPI generated consists of 21 indicators and 9 elements of the 3 pillars of sustainable development (economic, social, and environmental

Financial Performance of Socially Responsible Indices

Directory of Open Access Journals (Sweden)

Śliwiński Paweł

2017-03-01

Full Text Available This article analyzes rate-of-return and risk related to investments in socially responsible and conventional country indices. The socially responsible indices are the DJSI Korea, DJSI US and Respect Index, and the corresponding conventional country indices are the Korea Stock Exchange Composite KOSPI, Dow Jones Industrial Average and WIG20TR. We conclude that investing in the analyzed SRI indices do not yield systematically better results than investing in the respective conventional indices, both in terms of neoclassical risk and return rate.

Carbon Impact Analytics - Designing low carbon indices based on Carbon Impact Analytics indicators

International Nuclear Information System (INIS)

2016-01-01

Investors are increasingly exposed to carbon risks and now face the challenge of managing these risks and developing climate-resilient investment strategies. Carbon Impact Analytics (CIA), an innovative methodology for analyzing the full carbon impact of a portfolio or index, equips investors and asset managers with the tools necessary to reduce their climate-related risks but also to seize the opportunities offered by the ongoing energy transition. Investors, asset managers and other financial institutions may use CIA results to: - measure and manage risks, - optimize their contribution to the energy transition, - seize opportunities associated with climate change mitigation, - report on GHG emissions and savings (for regulatory purposes or voluntarily), - engage in dialogue with companies, - reallocate investment portfolios, - and build new low-carbon indices. In this report, Carbone 4 offers a detailed look into how CIA indicators can be used to either 1) reallocate an existing portfolio or index to achieve maximal carbon performance or 2) build new low carbon indices from the ground up, drawn from Carbone 4's ever-growing database of CIA-analyzed firms. Two main levers were used to optimize CIA output: 1. Sectorial reallocation: exclusion of fossil fuel-related sectors or insertion of low carbon pure players; 2. Intra-sectorial reallocation: best-in-class approach within a sector. Sectorial and intra-sectorial methods may be applied in conjunction with one another to maximize results. For example, a best-in-class + fossil fuel-free index may be constructed by first excluding the fossil fuel sector and then applying a CIA best-in-class approach to all remaining sectors. This report offers a detailed look into how CIA indicators can be used to rework portfolios or indices to maximize carbon performance or to build low carbon indices from the ground up. These methods are illustrated via two preliminary examples of indices designed by Carbone 4: the reallocated

Performance indicators for clinical practice management in primary care in Portugal: consensus from a Delphi study.

Science.gov (United States)

Basto-Pereira, Miguel; Furtado, Sara Isabel Félix; Silva, Ricardo Jorge Pereira; Fachado González, Francisco; Vara Fernandes, Tito Manuel; Correia de Sousa, Jaime; Yaphe, John

2015-03-01

Performance indicators assessing the quality of medical care and linked to pay for performance may cause disagreement. Portuguese indicators included in recent health care reform are controversial. To obtain consensus from opinion leaders in family medicine regarding the performance indicators for practice management used in the evaluation of Family Health Units in Portugal. Eighty-nine specialists in primary care were invited to answer the following question in an online Delphi study: 'Which performance indicators should be assessed regarding the organization and management of clinical practice in primary care in Portugal?' A Likert scale was used to evaluate validity, reliability, feasibility and sensitivity to change. Twenty-seven experts participated in the second round and achieved a high degree of consensus. Eight categories were created for analysis. The experts suggested the use of existing indicators as well as new indicators. Thirty-nine indicators suggested by the experts are currently in use in Portugal. The assessment of the number of clinical acts performed, the number of administrative acts, and evaluation of the clinical demographic profile achieved a high degree of consensus. The expert panel suggested fifty new indicators. Five categories of these new indicators had a high degree of consensus, and three categories had a low degree of consensus. The expert panel recommended that performance indicators of practice management should first assess the quantity of clinical and administrative activities undertaken. These indicators must take into account the human and financial resources available to the clinic and its demographic context.

Use of performance indicators to assess the solid waste management of health services.

Science.gov (United States)

Assis, Mayara C; Gomes, Vanielle A P; Balista, Wagner C; Freitas, Rodrigo R DE

2017-01-01

Modern society faces serious challenges, among them, the complexity of environmental problems. Thus, there are several possible sources of environmental degradation, however, the waste produced by health services have an important peculiarity due to its toxic or pathogenic characteristics, since when managed improperly provide also health risk public. The involvement of solid waste from healthcare services environmental impact integrates matters a little more complex, because in addition to environmental health, they also interfere with the healthiness of environments that generate, with the consequences of nosocomial infections, occupational health and public. Thus, the management has become an urgent need, especially when we see no use of performance indicators management in healthcare environments in the city of São Mateus, ES. For this, we used the Analytic Hierarchy Process Method to prioritize such indicators as the potential improvement in health services waste management process - WHS and thus environmental analysis was performed with the use of a template for SWOT analysis. The results showed that the performance indicator training strategies developed with employees has the greatest potential to assist in improvements in WHS (Health Services Waste) management process followed indicator knowledge of the regulations associated with procedures performed by employees and importance of biosafety regulations.

Use of performance indicators to assess the solid waste management of health services

Directory of Open Access Journals (Sweden)

MAYARA C. ASSIS

2017-10-01

Full Text Available ABSTRACT Modern society faces serious challenges, among them, the complexity of environmental problems. Thus, there are several possible sources of environmental degradation, however, the waste produced by health services have an important peculiarity due to its toxic or pathogenic characteristics, since when managed improperly provide also health risk public. The involvement of solid waste from healthcare services environmental impact integrates matters a little more complex, because in addition to environmental health, they also interfere with the healthiness of environments that generate, with the consequences of nosocomial infections, occupational health and public. Thus, the management has become an urgent need, especially when we see no use of performance indicators management in healthcare environments in the city of São Mateus, ES. For this, we used the Analytic Hierarchy Process Method to prioritize such indicators as the potential improvement in health services waste management process - WHS and thus environmental analysis was performed with the use of a template for SWOT analysis. The results showed that the performance indicator training strategies developed with employees has the greatest potential to assist in improvements in WHS (Health Services Waste management process followed indicator knowledge of the regulations associated with procedures performed by employees and importance of biosafety regulations.

Implications of Key Performance Indicator Issues in Ontario Universities Explored

Science.gov (United States)

Chan, Vivian

2015-01-01

Since 1998, the Ministry of Training, Colleges and Universities in Ontario, Canada, has required that data on specific key performance indicators (KPIs) be made public by its publicly funded universities. The information is intended to be used by universities to demonstrate their achievements, to improve their programmes and services, and to…

Developing a Performance Assessment Framework and Indicators for Communicable Disease Management in Natural Disasters.

Science.gov (United States)

Babaie, Javad; Ardalan, Ali; Vatandoost, Hasan; Goya, Mohammad Mehdi; Akbarisari, Ali

2016-02-01

Communicable disease management (CDM) is an important component of disaster public health response operations. However, there is a lack of any performance assessment (PA) framework and related indicators for the PA. This study aimed to develop a PA framework and indicators in CDM in disasters. In this study, a series of methods were used. First, a systematic literature review (SLR) was performed in order to extract the existing PA frameworks and indicators. Then, using a qualitative approach, some interviews with purposively selected experts were conducted and used in developing the PA framework and indicators. Finally, the analytical hierarchy process (AHP) was used for weighting of the developed indicators. The input, process, products, and outcomes (IPPO) framework was found to be an appropriate framework for CDM PA. Seven main functions were revealed to CDM during disasters. Forty PA indicators were developed for the four categories. There is a lack of any existing PA framework in CDM in disasters. Thus, in this study, a PA framework (IPPO framework) was developed for the PA of CDM in disasters through a series of methods. It can be an appropriate framework and its indicators could measure the performance of CDM in disasters.

Energy efficiency and performance indicators of European electricity market

Directory of Open Access Journals (Sweden)

Constantin DUGULEANĂ

2015-06-01

Full Text Available The electric power system plays a vital role in the development of every country, ensuring the “fuel” which feeds its economic motor. The efficient functioning of this motor is essential for economy. The efficiency and the performances of electric power systems are reflected on the living level of population, through the money spent and the satisfaction level of their needs. The continuity of power distribution process, the good communication between the suppliers and consumers, the promptitude of interventions, the environment protection - all these are aspects characterizing the performance level of power distribution systems. The paper analyzes the evolution of quality indicators of power distribution systems both for countries’ level and for population on European market of electricity.

Competitiveness as an Indicator of Sustainable Development of Tourism: Applying Destination Competitiveness Indicators to Ethiopia

NARCIS (Netherlands)

Wondowossen, T.A.; Nakagoshi, N.; Yukio, Y.; Jongman, R.H.G.; Dawit, A.Z.

2014-01-01

Competitiveness can be applied to predict the economic sustainability of tourism in destinations which has been measured in terms of leakages and linkage related to employment and income generation opportunities to the destinations. This article examines destination competitiveness of Ethiopia based

Idaho National Engineering Laboratory Radiological Control performance indicator report: First quarter, calendar year 1995

International Nuclear Information System (INIS)

Aitken, S.B.

1995-07-01

The INEL Radiological Control Performance Indicator Report is provided quarterly, inaccordance with Article 133 of the INEL Radiological Control Manual. Indicators are used as a measure of performance of the Radiological Control Program and as a motivation for improvement, not as a goal in themselves. These indicators should be used by management to assist in focusing priorities and attention and adherence to As-Low-As-Reasonably-Achievable (ALARA) practices. The ALARA Committees establish ALARA goals for the INEL based on forecasts and goals provided by each facility organizational manager or supervisor.Performance goals are realistic and measurable. Stringent goals are set at least annually to reflect expected workloads and improvement of radiological performance. Goals higher than previous goals may occasionally be set due to changes in work scope or mission. The INEL Radiological Control Performance Indicators consist of: Collective dose in person-rem; average worker dose, maximum dose to a worker, and maximum neutron dose to a worker;the number of skin and clothing contaminations, including the number of contaminated wounds and facial contaminations; the number of radioactive material intakes; the area of Contamination, High Contamination, and Airborne Radioactivity Areas in square feet; and airborne radioactivity events and spills

The Innovation Network Scoreboard: Towards key Performance Indicators for the Assessment of Innovation Networks

NARCIS (Netherlands)

Kohl, Holger; Cap, Jan-Patrick; Blaich, Erik; von Raesfeld Meijer, Ariane M.; Dameri, R.P.; Garelli, R.; Resta, M.; Beltrametti, L.

2015-01-01

This work operationalizes a framework for the assessment of innovation networks. While a theoretical framework provides value to scholars, practitioners require concrete methods and indicators that they can apply to their projects. Scholars face the same demand when conducting empirical research.

Two H-mixed Synthetic Indices for the Assessment of Research Performance

Directory of Open Access Journals (Sweden)

Fred Y. Ye.

2010-06-01

Full Text Available The author proposes two h-mixed synthetic indices, S=100×1g(h×CPP and T=100×1g(R×h×CPP, for the assessment of research performance, where CPP stands for citations per publication, h for h-index, and R for R-index, the square root of total number of citations in the Hirsch core (Ch. Like their components that respectively measure average citations of all publications, publication output and impact, and total number of citations in the Hirsch core, the h-mixed synthetic indices S and T use readily accessible data to produce a holistic measurement of academic achievement. Higher values correspond to greater academic achievement. The S and T indices are stratified by values of 100 to indicate varying degrees of achievement, where S<100 or T<100 indicates poor levels.

Facilities Performance Indicators Report, 2004-05. Facilities Core Data Survey

Science.gov (United States)

Glazner, Steve, Ed.

2006-01-01

The purpose of "Facilities Performance Indicators" is to provide a representative set of statistics about facilities in educational institutions. The second iteration of the web-based Facilities Core Data Survey was posted and available to facilities professionals at more than 3,000 institutions in the Fall of 2005. The website offered a printed…

20 CFR 666.420 - Under what circumstances may a sanction be applied to local areas for poor performance?

Science.gov (United States)

2010-04-01

... applied to local areas for poor performance? 666.420 Section 666.420 Employees' Benefits EMPLOYMENT AND... sanction be applied to local areas for poor performance? (a) If a local area fails to meet the levels of... achieving poor levels of performance; or (3) Requires other appropriate measures designed to improve the...

The Vienna consensus: report of an expert meeting on the development of ART laboratory performance indicators.

Science.gov (United States)

2017-11-01

This proceedings report presents the outcomes from an international workshop supported by the European Society of Human Reproduction and Embryology (ESHRE) and Alpha Scientists in Reproductive Medicine, designed to establish consensus on definitions and recommended values for Indicators for the assisted reproductive technology (ART) laboratory. Minimum performance-level values ('competency') and aspirational ('benchmark') values were recommended for a total of 19 Indicators, including 12 Key Performance Indicators (KPIs), five Performance Indicators (PIs), and two Reference Indicators (RIs). Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

The development and evaluation of programmatic performance indicators associated with maintenance at nuclear power plants

International Nuclear Information System (INIS)

Wreathall, J.; Fragola, J.; Appignani, P.; Burlile, G.; Shen, Y.

1990-05-01

This report summarizes the development and evaluation of programmatic performance indicators of maintenance. These indicators were selected by: (1) creating a formal framework of plant processes; (2) identifying features of plant behavior considered important to safety; (3) evaluating existing indicators against these features; and (4) performing statistical analyses for the selected indicators. The report recommends additional testing. This document provides the appendices to the report. These appendices are: synopsis of process model; detailed results of statistical analysis; and signal processing analysis of daily power loss indicator

A new composite measure of colonoscopy: the Performance Indicator of Colonic Intubation (PICI).

Science.gov (United States)

Valori, Roland M; Damery, Sarah; Gavin, Daniel R; Anderson, John T; Donnelly, Mark T; Williams, J Graham; Swarbrick, Edwin T

2018-01-01

 Cecal intubation rate (CIR) is an established performance indicator of colonoscopy. In some patients, cecal intubation with acceptable tolerance is only achieved with additional sedation. This study proposes a composite Performance Indicator of Colonic Intubation (PICI), which combines CIR, comfort, and sedation. METHODS : Data from 20 085 colonoscopies reported in the 2011 UK national audit were analyzed. PICI was defined as the percentage of procedures achieving cecal intubation with median dose (2 mg) of midazolam or less, and nurse-assessed comfort score of 1 - 3/5. Multivariate logistic regression analysis evaluated possible associations between PICI and patient, unit, colonoscopist, and diagnostic factors. RESULTS : PICI was achieved in 54.1 % of procedures. PICI identified factors affecting performance more frequently than single measures such as CIR and polyp detection, or CIR + comfort alone. Older age, male sex, adequate bowel preparation, and a positive fecal occult blood test as indication were associated with a higher PICI. Unit accreditation, the presence of magnetic imagers in the unit, greater annual volume, fewer years' experience, and higher training/trainer status were associated with higher PICI rates. Procedures in which PICI was achieved were associated with significantly higher polyp detection rates than when PICI was not achieved. CONCLUSIONS : PICI provides a simpler picture of performance of colonoscopic intubation than separate measures of CIR, comfort, and sedation. It is associated with more factors that are amenable to change that might improve performance and with higher likelihood of polyp detection. It is proposed that PICI becomes the key performance indicator for intubation of the colon in colonoscopy quality improvement initiatives. © Georg Thieme Verlag KG Stuttgart · New York.

Applying Spatial Indicators to Support Sustainable Urban Futures

DEFF Research Database (Denmark)

Petrov, Laura Oana; Shahumyan, Harutyun; Williams, Brendan

2013-01-01

structural analysis, FRAGSTATS, and ArcGIS software packages. The developed indicators form a valuable and complementary addition to the planning and policy process due to their interdisciplinary and practical nature. They were elaborated based on discussions with scientists, policy-makers and stakeholders......Indicators are helpful tools for land use management, particularly in the context of sustainable urban development. Together with scenarios they are a key requirement in order to produce information for stakeholders and policy-makers and aid their understanding of development processes. Using...... these information products and tools, policy-makers can be given the opportunity to spatially interrogate the driving forces and the current state of urban development. Understanding how trends will develop in the future and the possible impacts of their decisions on the development process is vital...

Defining Process Performance Indicators By Using Templates and Patterns

OpenAIRE

Río Ortega, Adela del; Resinas Arias de Reyna, Manuel; Durán Toro, Amador; Ruiz Cortés, Antonio

2012-01-01

Process Performance Indicators (PPIs) are a key asset for the mea- 2 surement of the achievement of strategic and operational goals in process–oriented 3 organisations. Ideally, the definition of PPIs should not only be unambiguous, 4 complete, and understandable to non–technical stakeholders, but also traceable 5 to business processes and verifiable by means of automated analysis. in practice, 6 PPIs are defined either informally in natural language, with its well–known prob- 7 lems, or at a...

Optical high-performance computing: introduction to the JOSA A and Applied Optics feature.

Science.gov (United States)

Caulfield, H John; Dolev, Shlomi; Green, William M J

2009-08-01

The feature issues in both Applied Optics and the Journal of the Optical Society of America A focus on topics of immediate relevance to the community working in the area of optical high-performance computing.

Paediatric International Nursing Study: using person-centred key performance indicators to benchmark children's services.

Science.gov (United States)

McCance, Tanya; Wilson, Val; Kornman, Kelly

2016-07-01

The aim of the Paediatric International Nursing Study was to explore the utility of key performance indicators in developing person-centred practice across a range of services provided to sick children. The objective addressed in this paper was evaluating the use of these indicators to benchmark services internationally. This study builds on primary research, which produced indicators that were considered novel both in terms of their positive orientation and use in generating data that privileges the patient voice. This study extends this research through wider testing on an international platform within paediatrics. The overall methodological approach was a realistic evaluation used to evaluate the implementation of the key performance indicators, which combined an integrated development and evaluation methodology. The study involved children's wards/hospitals in Australia (six sites across three states) and Europe (seven sites across four countries). Qualitative and quantitative methods were used during the implementation process, however, this paper reports the quantitative data only, which used survey, observations and documentary review. The findings demonstrate the quality of care being delivered to children and their families across different international sites. The benchmarking does, however, highlight some differences between paediatric and general hospitals, and between the different key performance indicators across all the sites. The findings support the use of the key performance indicators as a novel method to benchmark services internationally. Whilst the data collected across 20 paediatric sites suggest services are more similar than different, benchmarking illuminates variations that encourage a critical dialogue about what works and why. The transferability of the key performance indicators and measurement framework across different settings has significant implications for practice. The findings offer an approach to benchmarking and celebrating

Identifying the most significant indicators of the total road safety performance index.

Science.gov (United States)

Tešić, Milan; Hermans, Elke; Lipovac, Krsto; Pešić, Dalibor

2018-04-01

The review of the national and international literature dealing with the assessment of the road safety level has shown great efforts of the authors who tried to define the methodology for calculating the composite road safety index on a territory (region, state, etc.). The procedure for obtaining a road safety composite index of an area has been largely harmonized. The question that has not been fully resolved yet concerns the selection of indicators. There is a wide range of road safety indicators used to show a road safety situation on a territory. Road safety performance index (RSPI) obtained on the basis of a larger number of safety performance indicators (SPIs) enable decision makers to more precisely define the earlier goal- oriented actions. However, recording a broader comprehensive set of SPIs helps identify the strengths and weaknesses of a country's road safety system. Providing high quality national and international databases that would include comparable SPIs seems to be difficult since a larger number of countries dispose of a small number of identical indicators available for use. Therefore, there is a need for calculating a road safety performance index with a limited number of indicators (RSPI ln n ) which will provide a comparison of a sufficient quality, of as many countries as possible. The application of the Data Envelopment Analysis (DEA) method and correlative analysis has helped to check if the RSPI ln n is likely to be of sufficient quality. A strong correlation between the RSPI ln n and the RSPI has been identified using the proposed methodology. Based on this, the most contributing indicators and methodologies for gradual monitoring of SPIs, have been defined for each country analyzed. The indicator monitoring phases in the analyzed countries have been defined in the following way: Phase 1- the indicators relating to alcohol, speed and protective systems; Phase 2- the indicators relating to roads and Phase 3- the indicators relating to

UK key performance indicators and quality assurance standards for colonoscopy.

Science.gov (United States)

Rees, Colin J; Thomas Gibson, Siwan; Rutter, Matt D; Baragwanath, Phil; Pullan, Rupert; Feeney, Mark; Haslam, Neil

2016-12-01

Colonoscopy should be delivered by endoscopists performing high quality procedures. The British Society of Gastroenterology, the UK Joint Advisory Group on GI Endoscopy, and the Association of Coloproctology of Great Britain and Ireland have developed quality assurance measures and key performance indicators for the delivery of colonoscopy within the UK. This document sets minimal standards for delivery of procedures along with aspirational targets that all endoscopists should aim for. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Development of a new quality fair access best value performance indicator (BVPI) for recycling services.

Science.gov (United States)

Harder, M K; Stantzos, N; Woodard, R; Read, A

2008-01-01

Recycling schemes are being used worldwide to reduce the impact of municipal waste. Those using public funds are usually obliged to set performance indicators by which the standards of such schemes can be measured. In the UK, a set of statutory Best Value Performance Indicators (BVPI) must be reported annually, such as the Quality of Fair Access, which monitors the public's access to recycling facilities within 1000 m (known as BVPI 91). This work shows that BVPI 91, and performance indicators like it, quantify only very basic recycling services. A much more sensitive performance indicator is developed in this paper, labelled as the Maximum Practicable Recycling Rate Provision (MPRRP) achievable by a local authority. It indicates the percentage of local waste that could be reasonably recycled using the services provided, calculated on the basis of the average composition of the local waste, the local population coverage for collection of any materials, and nationally provided information stating how much of each material stream is generally suitable (practical) for recycling. Evidence for the usefulness of this new quantity is presented. Although this paper refers a particular performance indicator in the UK, its findings are applicable to all urban areas worldwide needing to monitor recycling service. Furthermore, the MPRRP could be used for planning purposes, and for determining the level of performance of an existing service, by comparing its predicted recycling rate to that actually obtained. Further work is now being carried out on this.

Team Performance Indicators Explain Outcome during Women’s Basketball Matches at the Olympic Games

Directory of Open Access Journals (Sweden)

Anthony S. Leicht

2017-12-01

Full Text Available The Olympic Games is the pinnacle international sporting competition with team sport coaches interested in key performance indicators to assist the development of match strategies for success. This study examined the relationship between team performance indicators and match outcome during the women’s basketball tournament at the Olympic Games. Team performance indicators were collated from all women’s basketball matches during the 2004–2016 Olympic Games (n = 156 and analyzed via linear (binary logistic regression and non-linear (conditional interference (CI classification tree statistical techniques. The most parsimonious linear model retained “defensive rebounds”, “field-goal percentage”, “offensive rebounds”, “fouls”, “steals”, and “turnovers” with a classification accuracy of 85.6%. The CI classification tree retained four performance indicators with a classification accuracy of 86.2%. The combination of “field-goal percentage”, “defensive rebounds”, “steals”, and “turnovers” provided the greatest probability of winning (91.1%, while a combination of “field-goal percentage”, “steals”, and “turnovers” provided the greatest probability of losing (96.7%. Shooting proficiency and defensive actions were identified as key team performance indicators for Olympic female basketball success. The development of key defensive strategies and/or the selection of athletes highly proficient in defensive actions may strengthen Olympic match success. Incorporation of non-linear analyses may provide teams with superior/practical approaches for elite sporting success.

Development of multiple performance indices and system parameter study for the design of a MEMS accelerometer

International Nuclear Information System (INIS)

Kim, Yong Il; Choi, Chan Kyu; Yoo, Hong Hee

2012-01-01

For the design of a MEMS accelerometer, proper performance indices should be defined and employed. Performance indices are obtained using either an experimental method or a numerical method. In the present study, a vibration analysis model of a MEMS accelerometer is introduced to calculate three performance indices: sensitivity, measurable acceleration range, and measurable frequency range. The accuracy of the vibration analysis model is first validated by comparing its modal and transient results with those of a commercial finite element code. Measurable acceleration and frequency ranges versus allowable errors for electrical and mechanical sensitivities are obtained and the effects of system parameter variations on the three performance indices are investigated

Using key performance indicators as knowledge-management tools at a regional health-care authority level.

Science.gov (United States)

Berler, Alexander; Pavlopoulos, Sotiris; Koutsouris, Dimitris

2005-06-01

The advantages of the introduction of information and communication technologies in the complex health-care sector are already well-known and well-stated in the past. It is, nevertheless, paradoxical that although the medical community has embraced with satisfaction most of the technological discoveries allowing the improvement in patient care, this has not happened when talking about health-care informatics. Taking the above issue of concern, our work proposes an information model for knowledge management (KM) based upon the use of key performance indicators (KPIs) in health-care systems. Based upon the use of the balanced scorecard (BSC) framework (Kaplan/Norton) and quality assurance techniques in health care (Donabedian), this paper is proposing a patient journey centered approach that drives information flow at all levels of the day-to-day process of delivering effective and managed care, toward information assessment and knowledge discovery. In order to persuade health-care decision-makers to assess the added value of KM tools, those should be used to propose new performance measurement and performance management techniques at all levels of a health-care system. The proposed KPIs are forming a complete set of metrics that enable the performance management of a regional health-care system. In addition, the performance framework established is technically applied by the use of state-of-the-art KM tools such as data warehouses and business intelligence information systems. In that sense, the proposed infrastructure is, technologically speaking, an important KM tool that enables knowledge sharing amongst various health-care stakeholders and between different health-care groups. The use of BSC is an enabling framework toward a KM strategy in health care.

Assessing the performance of maternity care in Europe: a critical exploration of tools and indicators.

Science.gov (United States)

Escuriet, Ramón; White, Joanna; Beeckman, Katrien; Frith, Lucy; Leon-Larios, Fatima; Loytved, Christine; Luyben, Ans; Sinclair, Marlene; van Teijlingen, Edwin

2015-11-02

This paper critically reviews published tools and indicators currently used to measure maternity care performance within Europe, focusing particularly on whether and how current approaches enable systematic appraisal of processes of minimal (or non-) intervention in support of physiological or "normal birth". The work formed part of COST Actions IS0907: "Childbirth Cultures, Concerns, and Consequences: Creating a dynamic EU framework for optimal maternity care" (2011-2014) and IS1405: Building Intrapartum Research Through Health - an interdisciplinary whole system approach to understanding and contextualising physiological labour and birth (BIRTH) (2014-). The Actions included the sharing of country experiences with the aim of promoting salutogenic approaches to maternity care. A structured literature search was conducted of material published between 2005 and 2013, incorporating research databases, published documents in english in peer-reviewed international journals and indicator databases which measured aspects of health care at a national and pan-national level. Given its emergence from two COST Actions the work, inevitably, focused on Europe, but findings may be relevant to other countries and regions. A total of 388 indicators were identified, as well as seven tools specifically designed for capturing aspects of maternity care. Intrapartum care was the most frequently measured feature, through the application of process and outcome indicators. Postnatal and neonatal care of mother and baby were the least appraised areas. An over-riding focus on the quantification of technical intervention and adverse or undesirable outcomes was identified. Vaginal birth (no instruments) was occasionally cited as an indicator; besides this measurement few of the 388 indicators were found to be assessing non-intervention or "good" or positive outcomes more generally. The tools and indicators identified largely enable measurement of technical interventions and undesirable

Key performance indicators for government and non profit agencies: implementing winning KPIs

National Research Council Canada - National Science Library

Parmenter, David

2012-01-01

"Winning techniques and strategies for nonprofits and government agencies in creating successful and critical key performance indicatorsBy exploring measures that have transformed businesses, David...

Performance indicators for maternity care in a circumpolar context: a scoping review

Science.gov (United States)

Rich, Rebecca; D'Hont, Thomsen; Linton, Janice; Murphy, Kellie E.; Veillard, Jeremy; Chatwood, Susan

2016-01-01

Background In circumpolar regions, harsh climates and scattered populations have prompted the centralization of care and reduction of local maternity services. The resulting practice of routine evacuation for birth from smaller towns to larger urban centres points to a potential conflict between the necessity to ensure patient safety and the importance of delivering services that are responsive to the health needs and values of populations served. Objective To identify recommended performance/quality indicators for use in circumpolar maternity care systems. Methods We searched Scopus, Ebscohost databases (including Academic Search Complete and CINAHL), the Global Health Database, High North Research Documents, and online grey literature. Articles were included if they focused on maternal health indicators in the population of interest (Indigenous women, women receiving care in circumpolar or remote regions). Articles were excluded if they were not related to pregnancy, birth or the immediate post-partum or neonatal periods. Two reviewers independently reviewed articles for inclusion and extracted relevant data. Results Twenty-six documents were included. Twelve were government documents, seven were review articles or indicator compilations, four were indicator sets recommended by academics or non-governmental organizations and three were research papers. We extracted and categorized 81 unique health indicators. The majority of indicators reflected health systems processes and outcomes during the antenatal and intra-partum periods. Only two governmental indicator sets explicitly considered the needs of Indigenous peoples. Conclusions This review demonstrates that, although most circumpolar health systems engage in performance reporting for maternity care, efforts to capture local priorities and values are limited in most regions. Future work in this area should involve northern stakeholders in the process of indicator selection and development. PMID:27938636

Performance indicators for maternity care in a circumpolar context: a scoping review

Directory of Open Access Journals (Sweden)

Rebecca Rich

2016-12-01

Full Text Available Background: In circumpolar regions, harsh climates and scattered populations have prompted the centralization of care and reduction of local maternity services. The resulting practice of routine evacuation for birth from smaller towns to larger urban centres points to a potential conflict between the necessity to ensure patient safety and the importance of delivering services that are responsive to the health needs and values of populations served. Objective: To identify recommended performance/quality indicators for use in circumpolar maternity care systems. Methods: We searched Scopus, Ebscohost databases (including Academic Search Complete and CINAHL, the Global Health Database, High North Research Documents, and online grey literature. Articles were included if they focused on maternal health indicators in the population of interest (Indigenous women, women receiving care in circumpolar or remote regions. Articles were excluded if they were not related to pregnancy, birth or the immediate post-partum or neonatal periods. Two reviewers independently reviewed articles for inclusion and extracted relevant data. Results: Twenty-six documents were included. Twelve were government documents, seven were review articles or indicator compilations, four were indicator sets recommended by academics or non-governmental organizations and three were research papers. We extracted and categorized 81 unique health indicators. The majority of indicators reflected health systems processes and outcomes during the antenatal and intra-partum periods. Only two governmental indicator sets explicitly considered the needs of Indigenous peoples. Conclusions: This review demonstrates that, although most circumpolar health systems engage in performance reporting for maternity care, efforts to capture local priorities and values are limited in most regions. Future work in this area should involve northern stakeholders in the process of indicator selection and development.

Influences of definition ambiguity on hospital performance indicator scores: examples from The Netherlands

NARCIS (Netherlands)

Anema, Helen A.; van der Veer, Sabine N.; Kievit, Job; Krol-Warmerdam, Elly; Fischer, Claudia; Steyerberg, Ewout; Dongelmans, Dave A.; Reidinga, Auke C.; Klazinga, Niek S.; de Keizer, Nicolet F.

2014-01-01

Reliable and unambiguously defined performance indicators are fundamental to objective and comparable measurements of hospitals' quality of care. In two separate case studies (intensive care and breast cancer care), we investigated if differences in definition interpretation of performance

Key Performance Indicators and Target Values for Multi-Megawatt Offshore Turbines

DEFF Research Database (Denmark)

Chaviaropoulos, Panagiotis K.; Natarajan, Anand; Jensen, Peter Hjuler

2014-01-01

on the basis of key performance indicators (KPIs). Following the European Wind Industrial Initiative the Levelized Cost of Electricity (LCOE) and its driving components are investigated, while quantifying the sensitivity of LCOE to its constituent factors. Methods whereby innovation in design can reduce...

Opinions among Danish knee surgeons about indications to perform total knee replacement showed considerable variation

DEFF Research Database (Denmark)

Troelsen, Anders; Schrøder, Henrik; Husted, Henrik

2012-01-01

During the past decade, the incidence of primary total knee replacement (TKA) surgery in Denmark has approximately doubled. This increase could be due to weakened indications to perform TKA surgery. We aimed to investigate variation in opinions about indications to perform TKA among Danish knee...

Performance indicators and combining assessments to evaluate the safety performance of licensees

International Nuclear Information System (INIS)

Aubrey, Richard; Van Binnebeek, J.J.; Warren, T.F.H.

1998-01-01

The CNRA believes that safety inspections are a major element in the regulatory authority's efforts to ensure the safe operation of nuclear facilities. Considering the importance of these issues, the Committee has established a special Working Group on Inspection Practices (WGIP). The purpose of WGIP, is to facilitate the exchange of information and experience related to regulatory safety inspections between CNRA Member countries. As a follow-up to the 1995 document on Compilation of Responses to a Questionnaire on the Evaluation of the Safety Performance of Licensees, WGIP members identified several issues where additional information would be useful in future meetings and discussions. The consensus of the Group was that performance indicators (PIs) and how assessments are combined were the two issues that should be addressed first. It was noted also that in addition to information in obtained through the questionnaire, results from the workshop in May 1996 may provide valuable input to the endeavour. This report summarises a review conducted of the PI-related information provided by the questionnaire, the workshop, and responses from WGIP members to a request for specific information not addressed previously

Performance of Differential-Phase-Shift Keying Protocol Applying 1310 nm Up-Conversion Single-Photon Detector

International Nuclear Information System (INIS)

Chen-Xu, Feng; Rong-Zhen, Jiao; Wen-Han, Zhang

2008-01-01

The performance of the differential-phase-shift keying (DPSK) protocol applying a 1310 nm up-conversion single-photon detector is analysed. The error rate and the communication rate as a function of distance for three quantum key distribution protocols, the Bennett–Brassard 1984, the Bennett–Brassard–Mermin 1992, and the DPSK, are presented. Then we compare the performance of these three protocols using the 1310nm up-conversion detector. We draw the conclusion that the DPSK protocol applying the detector has significant advantage over the other two protocols. Longer transmission distance and lower error rate can be achieved. (general)

Health services research related to performance indicators and benchmarking in Europe

NARCIS (Netherlands)

Klazinga, Niek; Fischer, Claudia; ten Asbroek, Augustinus

2011-01-01

Measuring quality of care through performance indicators and subsequently using these to compare, learn, and improve (benchmarking) has become a central component of health care policy. This paper aims to identify the main themes of health services research in this area and focuses on opportunities

Key Performance Indicators for Maintenance Management Effectiveness of Public Hospital Building

Directory of Open Access Journals (Sweden)

Farhana Omar Mardhiah

2017-01-01

Full Text Available Effectiveness of management in maintenance aspect holds the key element in influencing the performance of overall maintenance management. Similarly, public hospital building needs an effective maintenance management as this type of building in nature is one of the most complex issues in the field of maintenance. Improper building maintenance management adopted by the organization significantly will interrupt the overall operation of the building. Therefore, this paper is aim to identifying the key performance indicator (KPI of effectiveness of maintenance management for the public hospital building. A total of 32 set of questionnaires were distributed to the maintenance manager for each hospital in the northern region of peninsular Malaysia by using self-administration strategy. The survey answer was analyzed by performing descriptive analysis in SPSS. Overall, the result of descriptive analysis shows that all the ten factors of effectiveness of maintenance management are accepted as KPI since the mean value is at least 3.93 which classified as important and significant. The most significant factor of effectiveness of maintenance management is task planning and scheduling with the mean score of 4.35. While less significant factor is identify as maintenance approach with the value of mean score is 3.93. The both results indicates that the management need to have well-structured planning for the maintenance works and also need to embrace the exact strategy of maintenance approach in order to achieved better overall performance of maintenance management. This study may draw a standard practice for the government in assessing the performance of public facilities in terms of maintenance management.

Analysis of Malaysian Nuclear Agency Key Performance Indicator (KPI) 2005-2013

International Nuclear Information System (INIS)

Aisya Raihan Abdul Kadir; Hazmimi Kasim; Azlinda Aziz; Noriah Jamal

2014-01-01

Malaysia Nuclear Agency (Nuclear Malaysia) was established on 19 September 1972. Since its inception, Nuclear Malaysia has been entrusted with the responsibility to introduce and promote nuclear science and technology for national development. After more than 40 years of operation, Nuclear Malaysia remains significant as an excellent organization of science, technology and innovation. An analysis of the key performance indicator (KPI) achievements in 2005-2013 as indicator to the role of Nuclear Malaysia as a national research institution. It was established to promote, develop and encourage the application of nuclear technology. (author)

JACoW Automatic PID performance monitoring applied to LHC cryogenics

CERN Document Server

Bradu, Benjamin; Marti, Ruben; Tilaro, Filippo

2018-01-01

At CERN, the LHC (Large Hadron Collider) cryogenic system employs about 5000 PID (Proportional Integral Derivative) regulation loops distributed over the 27 km of the accelerator. Tuning all these regulation loops is a complex task and the systematic monitoring of them should be done in an automated way to be sure that the overall plant performance is improved by identifying the poorest performing PID controllers. It is nearly impossible to check the performance of a regulation loop with a classical threshold technique as the controlled variables could evolve in large operation ranges and the amount of data cannot be manually checked daily. This paper presents the adaptation and the application of an existing regulation indicator performance algorithm on the LHC cryogenic system and the different results obtained in the past year of operation. This technique is generic for any PID feedback control loop, it does not use any process model and needs only a few tuning parameters. The publication also describes th...

Overall Key Performance Indicator to Optimizing Operation of High-Pressure Homogenizers for a Reliable Quantification of Intracellular Components in Pichia pastoris.

Science.gov (United States)

Garcia-Ortega, Xavier; Reyes, Cecilia; Montesinos, José Luis; Valero, Francisco

2015-01-01

The most commonly used cell disruption procedures may present lack of reproducibility, which introduces significant errors in the quantification of intracellular components. In this work, an approach consisting in the definition of an overall key performance indicator (KPI) was implemented for a lab scale high-pressure homogenizer (HPH) in order to determine the disruption settings that allow the reliable quantification of a wide sort of intracellular components. This innovative KPI was based on the combination of three independent reporting indicators: decrease of absorbance, release of total protein, and release of alkaline phosphatase activity. The yeast Pichia pastoris growing on methanol was selected as model microorganism due to it presents an important widening of the cell wall needing more severe methods and operating conditions than Escherichia coli and Saccharomyces cerevisiae. From the outcome of the reporting indicators, the cell disruption efficiency achieved using HPH was about fourfold higher than other lab standard cell disruption methodologies, such bead milling cell permeabilization. This approach was also applied to a pilot plant scale HPH validating the methodology in a scale-up of the disruption process. This innovative non-complex approach developed to evaluate the efficacy of a disruption procedure or equipment can be easily applied to optimize the most common disruption processes, in order to reach not only reliable quantification but also recovery of intracellular components from cell factories of interest.

Endurance performance and nocturnal HRV indices.

Science.gov (United States)

Nummela, A; Hynynen, E; Kaikkonen, P; Rusko, H

2010-03-01

The effects of endurance training on endurance performance characteristics and cardiac autonomic modulation during night sleep were investigated. Twenty-four sedentary subjects trained over four weeks two hours per week at an average running intensity of 76+/-4% of their heart rate reserve. The R to R ECG-intervals were recorded and heart rate variability indices including high frequency power (HFP) were calculated for the nights following the training days every week. The subjects were divided into responders and non-responders according to the improvements in the maximal velocity of the incremental treadmill test (v(max)). The responders improved their v(max) by 10.9+/-46 % (p < 0.001) while no changes were observed in the non-responders (1.6+/-3.0%), although there were no differences in any training load variables between the groups. In the responders nocturnal HFP was significantly higher during the fourth training week compared to the first training week (p=0.036). Furthermore, a significant correlation was observed between the change in v(max) and the change in nocturnal HFP (r=0.482, p=0.042). It was concluded that after similar training, an increase in cardiac vagal modulation was related to improved v(max) in the sedentary subjects. Georg Thieme Verlag KG Stuttgart.New York.

Developing a national performance indicator framework for the Dutch health system

NARCIS (Netherlands)

ten Asbroek, A. H. A.; Arah, O. A.; Geelhoed, J.; Custers, T.; Delnoij, D. M.; Klazinga, N. S.

2004-01-01

Objective. To report on the first phase of the development of a national performance indicator framework for the Dutch health system. Methods. In January 2002, we initiated an informed interactive process with the intended users-policymakers at the Ministry of Health, Welfare and Sport-and academics

Developing a national performance indicator framework for the Dutch health system.

NARCIS (Netherlands)

Asbroek, A.H.A. ten; Arah, O.A.; Geelhoed, J.; Custers, J.; Delnoij, D.M.; Klazinga, N.S.

2004-01-01

Objective. To report on the first phase of the development of a national performance indicator framework for the Dutch health system. Methods. In January 2002, we initiated an informed interactive process with the intended users-policymakers at the Ministry of Health, Welfare and Sport—and academics

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

Science.gov (United States)

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

Cernavoda NPP Unit 1: Operating experience program and plant specific performance indicators (level 2)

International Nuclear Information System (INIS)

Teodor, Vasile; Popa, Viorel

1998-01-01

The basis for the Operating Experience Program was set in place since early stages of the commissioning phase (1993), when a system based on the Canadian approach was implemented for reporting, reviewing, assessing and establishing of the necessary corrective action for unplanned events. This system provided excellent opportunity to train staff in unplanned event assessment methodology, and prepare the station for the formal reporting process following criticality in accordance with the licensing requirements. The formal process, set in place after criticality is described in Station Instruction Procedure SI-01365-P13 'Unplanned Event Report' and was developed under the supervision of Safety and Compliance Department. In parallel, a program for information exchange and trending of performance indicators was developed by Technical Services Department. The WANO recommendations following August 1997 Peer Review provided the opportunity for a better understanding and reconsideration of the Operating Experience Program. As a result, all the activities related to this topic were assigned to a new structure, within Safety and Compliance Department. As such an Operating Experience Group was created and a new program is now being developed in an integrated and centralized manner. The content of the paper is the following: - Overview; - Operating Experience Program; - Event Analysis (Unplanned Events Assessment System - UEIR Process- and Systematic Analysis of Operational Events - ACR Process); - Information Exchange Program; - Monitoring of Operating Experience - Plant Specific Performance Indicators; - Purpose; - Level 2 Performance Indicators. Four appendices are added containing: - A. Station performance indicators/targets (Level 2); - B. SPI (Station Performance Indicators - Level 2) - Graphics; - C. UEIR, LRS (Safety and Licensing Review Sheet), UEFR (Unplanned Event Follow-up Report), ACR and OPEX forms. (authors)

Applying a social network analysis (SNA) approach to understanding radiologists' performance in reading mammograms

Science.gov (United States)

Tavakoli Taba, Seyedamir; Hossain, Liaquat; Heard, Robert; Brennan, Patrick; Lee, Warwick; Lewis, Sarah

2017-03-01

Rationale and objectives: Observer performance has been widely studied through examining the characteristics of individuals. Applying a systems perspective, while understanding of the system's output, requires a study of the interactions between observers. This research explains a mixed methods approach to applying a social network analysis (SNA), together with a more traditional approach of examining personal/ individual characteristics in understanding observer performance in mammography. Materials and Methods: Using social networks theories and measures in order to understand observer performance, we designed a social networks survey instrument for collecting personal and network data about observers involved in mammography performance studies. We present the results of a study by our group where 31 Australian breast radiologists originally reviewed 60 mammographic cases (comprising of 20 abnormal and 40 normal cases) and then completed an online questionnaire about their social networks and personal characteristics. A jackknife free response operating characteristic (JAFROC) method was used to measure performance of radiologists. JAFROC was tested against various personal and network measures to verify the theoretical model. Results: The results from this study suggest a strong association between social networks and observer performance for Australian radiologists. Network factors accounted for 48% of variance in observer performance, in comparison to 15.5% for the personal characteristics for this study group. Conclusion: This study suggest a strong new direction for research into improving observer performance. Future studies in observer performance should consider social networks' influence as part of their research paradigm, with equal or greater vigour than traditional constructs of personal characteristics.

Food safety performance indicators to benchmark food safety output of food safety management systems

NARCIS (Netherlands)

Jacxsens, L.; Uyttendaele, M.; Devlieghere, F.; Rovira, J.; Oses Gomez, S.; Luning, P.A.

2010-01-01

There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses.

Detailed descriptions of overall performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-02-15

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety.

Detailed descriptions of overall performance indicators

International Nuclear Information System (INIS)

1988-02-01

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety

Predicting Student Performance and Differences in Learning Styles based on Textual Complexity Indices applied on Blog and Microblog Posts

NARCIS (Netherlands)

Popescu, Elvira; Dascalu, Mihai; Becheru, Alexandru; Crossley, Scott; Trausan-Matu, Stefan

2016-01-01

Social media tools are increasingly popular in Computer Supported Collaborative Learning and the analysis of students' contributions on these tools is an emerging research direction. Previous studies have mainly focused on examining quantitative behavior indicators on social media tools. In

Performance limits for exo-clutter Ground Moving Target Indicator (GMTI) radar.

Energy Technology Data Exchange (ETDEWEB)

Doerry, Armin Walter

2010-09-01

The performance of a Ground Moving Target Indicator (GMTI) radar system depends on a variety of factors, many which are interdependent in some manner. It is often difficult to 'get your arms around' the problem of ascertaining achievable performance limits, and yet those limits exist and are dictated by physics. This report identifies and explores those limits, and how they depend on hardware system parameters and environmental conditions. Ultimately, this leads to a characterization of parameters that offer optimum performance for the overall GMTI radar system. While the information herein is not new to the literature, its collection into a single report hopes to offer some value in reducing the 'seek time'.

Exposure data and risk indicators for safety performance assessment in Europe.

NARCIS (Netherlands)

Papadimitriou, E. Yannis, G. Bijleveld, F.D. & Cardoso, J.L.

2013-01-01

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the

Performance indicators used to assess the quality of primary dental care

NARCIS (Netherlands)

González, Grisel Zacca; Klazinga, Niek; ten Asbroek, Guus; Delnoij, Diana M.

2006-01-01

An appropriate quality of medical care including dental care should be an objective of every government that aims to improve the oral health of its population. OBJECTIVES: To determine performance indicators that could be used to assess the quality of primary dental care at different levels of a

Performance estimation of Tesla turbine applied in small scale Organic Rankine Cycle (ORC) system

International Nuclear Information System (INIS)

Song, Jian; Gu, Chun-wei; Li, Xue-song

2017-01-01

Highlights: • One-dimensional model of the Tesla turbine is improved and applied in ORC system. • Working fluid properties and system operating conditions impact efficiency. • The influence of turbine efficiency on ORC system performance is evaluated. • Potential of using Tesla turbine in ORC systems is estimated. - Abstract: Organic Rankine Cycle (ORC) system has been proven to be an effective method for the low grade energy utilization. In small scale applications, the Tesla turbine offers an attractive option for the organic expander if an efficient design can be achieved. The Tesla turbine is simple in structure and is easy to be manufactured. This paper improves the one-dimensional model for the Tesla turbine, which adopts a non-dimensional formulation that identifies the dimensionless parameters that dictates the performance features of the turbine. The model is used to predict the efficiency of a Tesla turbine that is applied in a small scale ORC system. The influence of the working fluid properties and the operating conditions on the turbine performance is evaluated. Thermodynamic analysis of the ORC system with different organic working fluids and under various operating conditions is conducted. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, the Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

Effect of interprofessional student-led beds on emergency department performance indicators.

Science.gov (United States)

Meek, Robert; Morphet, Julia; Hood, Kerry; Leech, Michelle; Sandry, Kate

2013-10-01

The study aims to compare ED performance indicators between patients managed by students in an inter-professional learning (IPL) programme and comparable patients receiving usual ED care. An IPL programme ran for five separate 2 week periods during 2012. Four student-led beds were managed by four final year students (two medical, two nursing). Four control beds were matched for patient acuity. Data were gathered electronically from the ED information system. Comparisons of baseline characteristics and a range of ED performance indicators were made between patients managed in the student-led and control beds. Patient satisfaction with student care was surveyed. Characteristics of the 369 study and 365 control patients were similar. Median times to being seen by a nurse and a doctor were not significantly different between student-led and control beds, at 50 (19-103) versus 45 (20-93) min, and 84 (28-162) versus 91 (41-165) min, respectively. Median time to inpatient referral for admitted patients was significantly longer in student-led compared with control beds, being 142 (65-249) versus 101.5 (48-200) min, respectively. Median lengths of stay were similar between the student-led and control groups, being 263 (201-343) versus 303.5 (204-384) min for discharged patients, and 866 (571-1238) versus 745.5 (487-1168) min for inpatient ward admissions. Patients reported high levels of satisfaction with student care. There was little difference in performance indicators between patients managed by student teams as part of an IPL programme and a similar group receiving usual ED care. © 2013 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Applying incomplete statistics to nonextensive systems with different q indices

International Nuclear Information System (INIS)

Nivanen, L.; Pezeril, M.; Wang, Q.A.; Mehaute, A. Le

2005-01-01

The nonextensive statistics based on the q-entropy Sq=--bar i=1v(pi-piq)1-q has been so far applied to systems in which the q value is uniformly distributed. For the systems containing different q's, the applicability of the theory is still a matter of investigation. The difficulty is that the class of systems to which the theory can be applied is actually limited by the usual nonadditivity rule of entropy which is no more valid when the systems contain non uniform distribution of q values. In this paper, within the framework of the so called incomplete information theory, we propose a more general nonadditivity rule of entropy prescribed by the zeroth law of thermodynamics. This new nonadditivity generalizes in a simple way the usual one and can be proved to lead uniquely to the q-entropy

Evaluation of two dairy herd reproductive performance indicators that are adjusted for voluntary waiting period

Directory of Open Access Journals (Sweden)

Löf Emma

2012-01-01

Full Text Available Abstract Background Overall reproductive performance of dairy herds is monitored by various indicators. Most of them do not consider all eligible animals and do not consider different management strategies at farm level. This problem can be alleviated by measuring the proportion of pregnant cows by specific intervals after their calving date or after a fixed time period, such as the voluntary waiting period. The aim of this study was to evaluate two reproductive performance indicators that consider the voluntary waiting period at the herd. The two indicators were: percentage of pregnant cows in the herd after the voluntary waiting period plus 30 days (PV30 and percentage of inseminated cows in the herd after the voluntary waiting period plus 30 days (IV30. We wanted to assess how PV30 and IV30 perform in a simulation of herds with different reproductive management and physiology and to compare them to indicators of reproductive performance that do not consider the herd voluntary waiting period. Methods To evaluate the reproductive indicators we used the SimHerd-program, a stochastic simulation model, and 18 scenarios were simulated. The scenarios were designed by altering the reproductive management efficiency and the status of reproductive physiology of the herd. Logistic regression models, together with receiver operating characteristics (ROC, were used to examine how well the reproductive performance indicators could discriminate between herds of different levels of reproductive management efficiency or reproductive physiology. Results The logistic regression models with the ROC analysis showed that IV30 was the indicator that best discriminated between different levels of management efficiency followed by PV30, calving interval, 200-days not-in calf-rate (NotIC200, in calf rate at100-days (IC100 and a fertility index. For reproductive physiology the ROC analysis showed that the fertility index was the indicator that best discriminated

A critical cluster analysis of 44 indicators of author-level performance

DEFF Research Database (Denmark)

Wildgaard, Lorna Elizabeth

2016-01-01

-four indicators of individual researcher performance were computed using the data. The clustering solution was supported by continued reference to the researcher’s curriculum vitae, an effect analysis and a risk analysis. Disciplinary appropriate indicators were identified and used to divide the researchers......This paper explores a 7-stage cluster methodology as a process to identify appropriate indicators for evaluation of individual researchers at a disciplinary and seniority level. Publication and citation data for 741 researchers from 4 disciplines was collected in Web of Science. Forty...... of statistics in research evaluation. The strength of the 7-stage cluster methodology is that it makes clear that in the evaluation of individual researchers, statistics cannot stand alone. The methodology is reliant on contextual information to verify the bibliometric values and cluster solution...

Daya Bay Nuclear Power Station operation and management indicators system

International Nuclear Information System (INIS)

Fang Chunfa

2000-01-01

, where every worker gets access to and care for the performance of the plant. Root cause analysis is carried out and improvement measures are made when certain indicator is at unfavorable trend. Benchmarking was and will continuously be conducted with nuclear industrial peers throughout the world. And GNPS got close to the medium level in 1997, reached and surpassed medium level in 1998. In 1999, GNPS has approached the top quartile. The indicator system, together with its tracking system, has been applied allover the station and is contributive to the realization of all kinds of corporate objectives. At the same time, it has been universally promoted and applied in the world by other institute and nuclear power stations

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

International Nuclear Information System (INIS)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R.

2011-01-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

Energy Technology Data Exchange (ETDEWEB)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R., E-mail: grecco@ien.gov.b, E-mail: luquetti@ien.gov.b, E-mail: paulov@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Instrumentacao e Confiabilidade Humana; Vidal, Mario C.R., E-mail: mvidal@ergonomia.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEP/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia de Producao. Grupo de Ergonomia e Novas Tecnologias (GENTE)

2011-07-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

The Fishery Performance Indicators: A Management Tool for Triple Bottom Line Outcomes

Science.gov (United States)

Anderson, James L.; Anderson, Christopher M.; Chu, Jingjie; Meredith, Jennifer; Asche, Frank; Sylvia, Gil; Smith, Martin D.; Anggraeni, Dessy; Arthur, Robert; Guttormsen, Atle; McCluney, Jessica K.; Ward, Tim; Akpalu, Wisdom; Eggert, Håkan; Flores, Jimely; Freeman, Matthew A.; Holland, Daniel S.; Knapp, Gunnar; Kobayashi, Mimako; Larkin, Sherry; MacLauchlin, Kari; Schnier, Kurt; Soboil, Mark; Tveteras, Sigbjorn; Uchida, Hirotsugu; Valderrama, Diego

2015-01-01

Pursuit of the triple bottom line of economic, community and ecological sustainability has increased the complexity of fishery management; fisheries assessments require new types of data and analysis to guide science-based policy in addition to traditional biological information and modeling. We introduce the Fishery Performance Indicators (FPIs), a broadly applicable and flexible tool for assessing performance in individual fisheries, and for establishing cross-sectional links between enabling conditions, management strategies and triple bottom line outcomes. Conceptually separating measures of performance, the FPIs use 68 individual outcome metrics—coded on a 1 to 5 scale based on expert assessment to facilitate application to data poor fisheries and sectors—that can be partitioned into sector-based or triple-bottom-line sustainability-based interpretative indicators. Variation among outcomes is explained with 54 similarly structured metrics of inputs, management approaches and enabling conditions. Using 61 initial fishery case studies drawn from industrial and developing countries around the world, we demonstrate the inferential importance of tracking economic and community outcomes, in addition to resource status. PMID:25946194

Performance of Syariah and Composite Indices: Evidence from Bursa Malaysia

OpenAIRE

Mohamed Albaity; Rubi Ahmad

2008-01-01

This study provides new evidence on the risk and return performance of the Kuala Lumpur Syariah Index (KLSI) and the Kuala Lumpur Composite Index (KLCI). An Islamic stock market index such as KLSI selects stocks according to Islamic laws, and thus has a more stringent screening process than its conventional counterpart, KLCI. Our results, however, provide no evidence of significant statistical differences in risk-adjusted returns between Islamic and conventional stock market indices during 19...

INDICATORS OF THE ECONOMIC AND FINANCIAL PERFORMANCE FOR THE PUBLIC UNIVERSITIES IN ROMANIA

Directory of Open Access Journals (Sweden)

Cristina-Petrina Trincu-Dragusin

2016-12-01

Full Text Available Quantifying the economic and financial performance in public universities represents a current, very interesting and quite a controversial matter of debate given that the accounting information realm is not sufficient explored through the financial analysis. The paper focuses on the ways of measuring the economic and financial performance in public universities in Romania, having as main purpose to provide a set of assessing indicators, by adapting the financial analysis paradigm existing for the private sector, to the public sector particularities. The specific objectives refer to the rentability, self-financing capacity, efficiency of the university expenditures and risk analysis, and the research approach is developed in the context in which either the national law or the international one do not regulate specific indicators for the economic and financial performance analysis within the public sector institutions

Food safety performance indicators to benchmark food safety output of food safety management systems.

Science.gov (United States)

Jacxsens, L; Uyttendaele, M; Devlieghere, F; Rovira, J; Gomez, S Oses; Luning, P A

2010-07-31

There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses. Validation was conducted on the basis of an extensive microbiological assessment scheme (MAS). The assumption behind the food safety performance diagnosis is that food businesses which evaluate the performance of their food safety management system in a more structured way and according to very strict and specific criteria will have a better insight in their actual microbiological food safety performance, because food safety problems will be more systematically detected. The diagnosis can be a useful tool to have a first indication about the microbiological performance of a food safety management system present in a food business. Moreover, the diagnosis can be used in quantitative studies to get insight in the effect of interventions on sector or governmental level. Copyright 2010 Elsevier B.V. All rights reserved.

Comparative Performance of Ground vs. Aerially Assessed RGB and Multispectral Indices for Early-Growth Evaluation of Maize Performance under Phosphorus Fertilization

Directory of Open Access Journals (Sweden)

Adrian Gracia-Romero

2017-11-01

Full Text Available Low soil fertility is one of the factors most limiting agricultural production, with phosphorus deficiency being among the main factors, particularly in developing countries. To deal with such environmental constraints, remote sensing measurements can be used to rapidly assess crop performance and to phenotype a large number of plots in a rapid and cost-effective way. We evaluated the performance of a set of remote sensing indices derived from Red-Green-Blue (RGB images and multispectral (visible and infrared data as phenotypic traits and crop monitoring tools for early assessment of maize performance under phosphorus fertilization. Thus, a set of 26 maize hybrids grown under field conditions in Zimbabwe was assayed under contrasting phosphorus fertilization conditions. Remote sensing measurements were conducted in seedlings at two different levels: at the ground and from an aerial platform. Within a particular phosphorus level, some of the RGB indices strongly correlated with grain yield. In general, RGB indices assessed at both ground and aerial levels correlated in a comparable way with grain yield except for indices a* and u*, which correlated better when assessed at the aerial level than at ground level and Greener Area (GGA which had the opposite correlation. The Normalized Difference Vegetation Index (NDVI evaluated at ground level with an active sensor also correlated better with grain yield than the NDVI derived from the multispectral camera mounted in the aerial platform. Other multispectral indices like the Soil Adjusted Vegetation Index (SAVI performed very similarly to NDVI assessed at the aerial level but overall, they correlated in a weaker manner with grain yield than the best RGB indices. This study clearly illustrates the advantage of RGB-derived indices over the more costly and time-consuming multispectral indices. Moreover, the indices best correlated with GY were in general those best correlated with leaf phosphorous content

Il governo della performance dei processi di business : dai Key Performance Indicators ai Key Risk Indicators

OpenAIRE

Sergio Beretta; Saverio Bozzolan

2013-01-01

The recent paper issued by COSO ["Developing Key Risk Indicators to Strengthen Enterprise Risk Management" (Coso, 2010)] is the starting point of this article whose aim is to discuss the relevance of the business process dimension in the design and implementation of Key Risk Indicators. The Authors analyze the reasons of the systematic underestimation of the business process dimension in the COSO papers and debate the implications that the explicit consideration of the business process dimens...

Use of social media in health promotion: purposes, key performance indicators, and evaluation metrics.

Science.gov (United States)

Neiger, Brad L; Thackeray, Rosemary; Van Wagenen, Sarah A; Hanson, Carl L; West, Joshua H; Barnes, Michael D; Fagen, Michael C

2012-03-01

Despite the expanding use of social media, little has been published about its appropriate role in health promotion, and even less has been written about evaluation. The purpose of this article is threefold: (a) outline purposes for social media in health promotion, (b) identify potential key performance indicators associated with these purposes, and (c) propose evaluation metrics for social media related to the key performance indicators. Process evaluation is presented in this article as an overarching evaluation strategy for social media.

20 CFR 669.500 - What performance measures and standards apply to the NFJP?

Science.gov (United States)

2010-04-01

... account the characteristics of the population to be served and the economic conditions in the service area... must be included in the approved plan. (b) We may develop additional performance indicators with... service area economy and local demographics of eligible MSFW's. The levels of performance for these...

Implementing the Systems of Performance Management Indicators (Balanced Scorecard) Within Notary Offices From Romania

OpenAIRE

George Cristian SCHIN; Margareta RACOVITA; Viorel SUSANU

2011-01-01

The article concentrates on the analysis of the results of a research performed in performance management domain applied within notary offices from Romania. The results of the most relevant sections of the research:the level of understanding and knowledge of Balanced Scorecard concept by notaries’ public from Romania, main arguments for notaries’ public from Romania that desire to implement Balanced Scorecards within notary offices, as well as the success factors that facilitate implementing ...

PERFORMANCE EVALUATION AND RISK AVERSION RATE FOR SEVERAL STOCK INDICES IN INDONESIA STOCK EXCHANGE

Directory of Open Access Journals (Sweden)

Robiyanto Robiyanto

2017-03-01

Full Text Available There are numerous stock indices in Indonesia Stock Exchange. Several of them are LQ-45, MBX, DBX, JII, SRI-KEHATI, PEFINDO-25, BISNIS-27, IDX-30 and KOMPAS-100. Unfortunately there are limi­ted researches which have been done to measure those indices performance specifically. The same condition also occurs on risk aversion level usage in Indonesia Stock Exchange, only few numbers of researches use this me­a­surement in the portfolio valuation. Based on that, this research measured the performance and risk aversion rate of those indices in Indonesia Stock Exchange. The results of this study were SRI-KEHATI becomes the best performer with the highest risk aversion rate, while Jakarta Islamic Index (JII produces the lowest positive per­formance with the lowest risk aversion rate. This finding shows that sharia stocks’ characters (i.e. usury free could give relieveness and convenience regardless its per­formance.

INTEGRAL ESTIMATE OF THE EFFECTIVENESS OF PERFORMANCE OF INDICES OF STATE TARGET PROGRAMS FOR THE PROTECTION OF THE NATURAL ENVIRONMENT IN UKRAINE

Directory of Open Access Journals (Sweden)

Oksana Senyshyn

2017-12-01

Full Text Available This scientific article deals with the integral estimate of the effectiveness of performance of indices of the state target programs for protection of the natural environment in Ukraine, namely – the subject of the research is quantitative indices of the State target program “Forests of Ukraine” for 2010–2015 and their estimate. Methodology. The methodological basis of the study is the system of indices for the estimate of effectiveness and performance of the state target programs for the protection of the natural environment that include the following indices (indicators: an integrated index of financing the program actions and indicators of co-financing. The author applies integrated indicator of financing the program tasks and actions to assess the actual level of financing the program from various sources through the entire period of the program implementation and to carry out a comparative analysis of financial support for various programs implemented at the expense of the budgetary funds and other sources. The author uses indicator of co-financing for calculating the ratio of actual and planned indicators of the attraction of the funds from other sources (public borrowings, extrabudgetary funds per 1 UAH of the budget funds. Results. Proceeding from the analysis of quantitative indices of the State target program “Forests of Ukraine” for 2010–2015, it was established that for all 5 years of activity, the planned level of budget financing of the Program has not been achieved. In particular, in 2010–2011, operations and tasks of the Program had been financed from the budget funds by 77% and in 2014–2015 by 33% and 27% respectively. During the entire period of the Program implementation, the average annual rate of actual financing from all sources attained 147%, including 53% from the state budget and 206% from other sources of financing. The author has proved that the said indices of the performance of the Program�

Identifying individual changes in performance with composite quality indicators while accounting for regression to the mean.

Science.gov (United States)

Gajewski, Byron J; Dunton, Nancy

2013-04-01

Almost a decade ago Morton and Torgerson indicated that perceived medical benefits could be due to "regression to the mean." Despite this caution, the regression to the mean "effects on the identification of changes in institutional performance do not seem to have been considered previously in any depth" (Jones and Spiegelhalter). As a response, Jones and Spiegelhalter provide a methodology to adjust for regression to the mean when modeling recent changes in institutional performance for one-variable quality indicators. Therefore, in our view, Jones and Spiegelhalter provide a breakthrough methodology for performance measures. At the same time, in the interests of parsimony, it is useful to aggregate individual quality indicators into a composite score. Our question is, can we develop and demonstrate a methodology that extends the "regression to the mean" literature to allow for composite quality indicators? Using a latent variable modeling approach, we extend the methodology to the composite indicator case. We demonstrate the approach on 4 indicators collected by the National Database of Nursing Quality Indicators. A simulation study further demonstrates its "proof of concept."

International performance indicators: gas supply

International Nuclear Information System (INIS)

1994-12-01

This study evaluates the performance of Australian's natural gas utilities against world best practice. In particular, it examines whether Australia's traded goods sector is disadvantaged by the performance of domestic infrastructure service industries. It reports on the operating efficiency of the natural gas industry using Data Envelopment Analysis. It concludes that the Australian gas industry as a whole is performing relatively well in term of operating efficiency and that its prices are comparable with prices in North America, once differences in consumption per customer are taken into consideration. Appendixes 1 and 2 provide a summary of the structure and regulation of the gas supply industry in Australia and selected overseas countries, while the Appendix 3 gives an econometric analysis of the relationships between consumption per customer and residential price-cost margins. refs., tabs., figs

Comparison between visual half-field performance and cerebral blood flow changes as indicators of language dominance.

Science.gov (United States)

Krach, S; Chen, L M; Hartje, W

2006-03-01

The determination of hemispheric language dominance (HLD) can be accomplished in two ways. One approach relies on hemispheric differences in cerebral blood flow velocity (CBFV) changes during language activity, while the other approach makes use of performance differences between the left and right visual field when verbal stimuli are presented in a tachistoscopic visual field paradigm. Since both methodologically different approaches claim to assess functional HLD, it seems plausible to expect that the respective laterality indices (LI) would correspond. To test this expectation we measured language lateralisation in 58 healthy right-handed, left-handed, and ambidextrous subjects with both approaches. CBFV changes were recorded with functional transcranial Doppler sonography (fTCD). We applied a lexical decision task with bilateral visual field presentation of abstract nouns and, in addition, a task of mental word generation. In the lexical decision task, a highly significant right visual field advantage was observed for number of correct responses and reaction times, while at the same time and contrary to expectation the increase of CBFV was significantly higher in the right than left hemisphere. During mental word generation, the acceleration of CBF was significantly higher in the left hemisphere. A comparison between individual LI derived from CBF measurement during mental word generation and from visual field performances in the lexical decision task showed a moderate correspondence in classifying the subjects' HLD. However, the correlation between the corresponding individual LI was surprisingly low and not significant. The results are discussed with regard to the issue of a limited reliability of behavioural LI on the one hand and the possibility of a fundamental difference between the behavioural and the physiological indicators of laterality on the other hand.

Performance indicators for the efficiency analysis of urban drainage systems.

Science.gov (United States)

Artina, S; Becciu, G; Maglionico, M; Paoletti, A; Sanfilippo, U

2005-01-01

Performance indicators implemented in a decision support system (DSS) for the technical, managerial and economic evaluation of urban drainage systems (UDS), called MOMA FD, are presented. Several kinds of information are collected and processed by MOMA FD to evaluate both present situation and future scenarios of development and enhancement. Particular interest is focused on the evaluation of the environmental impact, which is considered a very relevant factor in the decision making process to identify the priorities for UDS improvements.

Are performances in Governance Indicators Complementary to Corruption Abatement?: A Cross-Country Analysis

Directory of Open Access Journals (Sweden)

Ramesh Chandra Das

2015-12-01

Full Text Available Private use of public office for private gain could be a tentative connotation of corruption and most distasteful event of corruption is that it is not there, nor that it is pervasive, but it is socially acknowledged in the global economy, especially in the developing nations. In the present paper we attempt to assess the interrelationship between the Corruption perception index (CPI and the principal components of governance indicators as per World Bank Governance Indicators like Control of Corruption (CC, Rule of Law (RL, Regulatory Quality (RQ and Government Effectiveness (GE. Applying Granger Causality Test the study observes a mixed or inconclusive result. Only bilateral causal link between the CPI and CC works for UK, whereas there are unilateral causal links between the CPI and one or more governance indicators working for other countries for France, Japan, China, India, Thailand and South Africa. In no way causalities are observed for USA, Germany and Brazil.

Are performances in Governance Indicators Complementary to Corruption Abatement? : A Cross-Country Analysis

Directory of Open Access Journals (Sweden)

Ramesh Chandra Das

2015-09-01

Full Text Available Private use of public office for private gain could be a tentative connotation of corruption and most distasteful event of corruption is that it is not there, nor that it is pervasive, but it is socially acknowledged in the global economy, especially in the developing nations. In the present paper we attempt to assess the interrelationship between the Corruption perception index (CPI and the principal components of governance indicators as per World Bank Governance Indicators like Control of Corruption (CC, Rule of Law (RL, Regulatory Quality (RQ and Government Effectiveness (GE. Applying Granger Causality Test the study observes a mixed or inconclusive result. Only bilateral causal link between the CPI and CC works for UK, whereas there are unilateral causal links between the CPI and one or more governance indicators working for other countries for France, Japan, China, India, Thailand and South Africa. In no way causalities are observed for USA, Germany and Brazil.

Constructing a strategy map for banking institutions with key performance indicators of the balanced scorecard.

Science.gov (United States)

Wu, Hung-Yi

2012-08-01

This study presents a structural evaluation methodology to link key performance indicators (KPIs) into a strategy map of the balanced scorecard (BSC) for banking institutions. Corresponding with the four BSC perspectives (finance, customer, internal business process, and learning and growth), the most important evaluation indicators of banking performance are synthesized from the relevant literature and screened by a committee of experts. The Decision Making Trial and Evaluation Laboratory (DEMATEL) method, a multiple criteria analysis tool, is then employed to determine the causal relationships between the KPIs, to identify the critical central and influential factors, and to establish a visualized strategy map with logical links to improve banking performance. An empirical application is provided as an example. According to the expert evaluations, the three most essential KPIs for banking performance are customer satisfaction, sales performance, and customer retention rate. The DEMATEL results demonstrate a clear road map to assist management in prioritizing the performance indicators and in focusing attention on the strategy-related activities of the crucial indicators. According to the constructed strategy map, management could better invest limited resources in the areas that need improvement most. Although these strategy maps of the BSC are not universal, the research results show that the presented approach is an objective and feasible way to construct strategy maps more justifiably. The proposed framework can be applicable to institutions in other industries as well. Copyright © 2011 Elsevier Ltd. All rights reserved.

Stakeholders' perception of key performance indicators (KPIs of public-private partnership (PPP projects

Directory of Open Access Journals (Sweden)

Olabode Emmanuel Ogunsanmi

2013-12-01

Full Text Available The study investigates key performance indicators (KPIs that could improve performance of public-private partnership (PPP projects in Nigeria. The study objectives include a comparison of stakeholders’ perception on KPIs and to investigate if significant difference exists between stakeholders’ perceptions on most KPIs. A structured questionnaire was used to collect information from various respondents who were recently involved in PPP projects. Random sampling technique was used to select forty-five (45 respondents out of which thirty-one (31 responses were used for the data analysis. The results indicate that top KPIs for performance improvement are levels of design complexity and technological advancement, and return on investment. Stakeholders agree on most of the rankings of the KPIs. The general perception of stakeholders was similar on most KPIs except for a few divergent opinions. The study findings have an implication for policy and decision making such that stakeholders could pay special attention to the KPIs identified, that could improve construction project performance. Finally the study recommends further research to explore KPIs for other procurement options.

Co-evolving prisoner's dilemma: Performance indicators and analytic approaches

Science.gov (United States)

Zhang, W.; Choi, C. W.; Li, Y. S.; Xu, C.; Hui, P. M.

2017-02-01

Understanding the intrinsic relation between the dynamical processes in a co-evolving network and the necessary ingredients in formulating a reliable theory is an important question and a challenging task. Using two slightly different definitions of performance indicator in the context of a co-evolving prisoner's dilemma game, it is shown that very different cooperative levels result and theories of different complexity are required to understand the key features. When the payoff per opponent is used as the indicator (Case A), non-cooperative strategy has an edge and dominates in a large part of the parameter space formed by the cutting-and-rewiring probability and the strategy imitation probability. When the payoff from all opponents is used (Case B), cooperative strategy has an edge and dominates the parameter space. Two distinct phases, one homogeneous and dynamical and another inhomogeneous and static, emerge and the phase boundary in the parameter space is studied in detail. A simple theory assuming an average competing environment for cooperative agents and another for non-cooperative agents is shown to perform well in Case A. The same theory, however, fails badly for Case B. It is necessary to include more spatial correlation into a theory for Case B. We show that the local configuration approximation, which takes into account of the different competing environments for agents with different strategies and degrees, is needed to give reliable results for Case B. The results illustrate that formulating a proper theory requires both a conceptual understanding of the effects of the adaptive processes in the problem and a delicate balance between simplicity and accuracy.

Better Measurement for Performance Improvement in Low- and Middle-Income Countries: The Primary Health Care Performance Initiative (PHCPI) Experience of Conceptual Framework Development and Indicator Selection.

Science.gov (United States)

Veillard, Jeremy; Cowling, Krycia; Bitton, Asaf; Ratcliffe, Hannah; Kimball, Meredith; Barkley, Shannon; Mercereau, Laure; Wong, Ethan; Taylor, Chelsea; Hirschhorn, Lisa R; Wang, Hong

2017-12-01

Policy Points: Strengthening accountability through better measurement and reporting is vital to ensure progress in improving quality primary health care (PHC) systems and achieving universal health coverage (UHC). The Primary Health Care Performance Initiative (PHCPI) provides national decision makers and global stakeholders with opportunities to benchmark and accelerate performance improvement through better performance measurement. Results from the initial PHC performance assessments in low- and middle-income countries (LMICs) are helping guide PHC reforms and investments and improve the PHCPI's instruments and indicators. Findings from future assessment activities will further amplify cross-country comparisons and peer learning to improve PHC. New indicators and sources of data are needed to better understand PHC system performance in LMICs. The Primary Health Care Performance Initiative (PHCPI), a collaboration between the Bill and Melinda Gates Foundation, The World Bank, and the World Health Organization, in partnership with Ariadne Labs and Results for Development, was launched in 2015 with the aim of catalyzing improvements in primary health care (PHC) systems in 135 low- and middle-income countries (LMICs), in order to accelerate progress toward universal health coverage. Through more comprehensive and actionable measurement of quality PHC, the PHCPI stimulates peer learning among LMICs and informs decision makers to guide PHC investments and reforms. Instruments for performance assessment and improvement are in development; to date, a conceptual framework and 2 sets of performance indicators have been released. The PHCPI team developed the conceptual framework through literature reviews and consultations with an advisory committee of international experts. We generated 2 sets of performance indicators selected from a literature review of relevant indicators, cross-referenced against indicators available from international sources, and evaluated through

THE IMPORTANCE OF PERFORMANCE INDICATORS IN ANALYZING BUSINESS ENVIRONMENT AND BUSINESS EVOLUTION

OpenAIRE

Andreea-Mihaela STROE

2017-01-01

The analysis of economic environment brings into attention of the ones interest important trends and important evolutions that can bring into surface new strategies and new ways of obtaining profit. This is to say that staying in connection with all the changes and analyzing the trends in business performance, analyzing performance indicators helps managers to know not only their firm but the environment, the opponents, stakeholders and the opportunities that can be optimized and used as adva...

Innovation indicators: Towards a User’s guide

Energy Technology Data Exchange (ETDEWEB)

Iizuka, M.; Hollanders, H.

2016-07-01

The increased use of innovation indicators is observed in policy sphere. Several reasons are attributed for this increased use: first, access to data on innovation increased as the result of over half a century of efforts made by international organizations and researchers in this field; second, an increase in types and number of innovation indicators; third, its increased use in business contexts with the understanding that innovation is an integral part of business performance, which further spurred the use and development of innovation indicators (Soete and Freeman, 2009); fourth, the expansion in geographical coverage of countries, particularly in emerging countries of Latin America, Asia and Africa (Gault, 2010) making innovation indicators more policy (politics) relevant in a wider variety of countries, e.g. by allowing to benchmark and compare countries’ innovation performance; and fifth, the innovation indicators (in particular, the composite indicator but any indicator if used in ranking countries) became a communicative tool in public debate, in the backdrop of recent emphasis on ‘evidence based policy’ and ‘participatory decision making’ in the policy domain (OECD, 2012). Considering innovation indicators are intended to improve the performance of innovation policy, their increasing use is generally good news. Nevertheless, due to the increase in diversity in type and context in which indicators are being applied there is an increased occurrence of inappropriate use and misinterpretation of innovation indicators in the policy sphere. This paper first describes the specific cases then tries to generalize the problem aiming to build a general guideline or check list on the appropriate use of innovation indicators. (Author)

An Approach for Automatically Deriving Key Performance Indicators from Ontological Enterprise Models

NARCIS (Netherlands)

Aksu, U.A.; Schunselaar, D.M.M.; Reijers, H.A.

2017-01-01

Organizations use Key Performance Indicators (KPIs) to monitor whether they attain their goals. Software vendors that supply generic software provide predefined KPIs in their software products for these organizations. However, each organization wants KPIs to be tailored to its specific goals.Th

New indicator for comparing the energy performance of CO2 utilization concepts

NARCIS (Netherlands)

Schakel, Wouter; Fernández-Dacosta, Cora; Van Der Spek, Mijndert; Ramírez, Andrea

2017-01-01

CO2 utilization is increasingly considered a greenhouse gas abatement strategy alternatively to CO2 storage. Existing indicators that assess the performance of CO2 utilization options often provide an incomplete perspective and are unsuitable to compare different utilization options with different

Stakeholders willingness to apply sustainable adventure tourism indicators: a case of Waterval Boven in South Africa

Directory of Open Access Journals (Sweden)

NN Tshipala

2014-01-01

Full Text Available In South Africa and across the globe, the development of adventure tourism industry has resulted in a multitude of different types of activities, destinations, risks, impacts and unsustainable practices. The development of adventure tourism in many destinations has boosted many economies across rural communities and countries. The added benefits of developing adventure tourism in a sustainable manner include the promotion of responsible investment, infrastructure development and a host of other positive economic, social and environmental impacts. This study investigates the stakeholders will to utilise sustainable adventure tourism indicators from residents, tourists, business owners and government employees at Waterval Boven if made available. Descriptive statistics were presented; Cronbach Alpha and Chi-square tests were also applied. In general, the respondents perceived the indicators positively and felt they could assist in the sustainable development of adventure tourism. The study contributes towards the development of sustainable adventure tourism destinations that can make a significant contribution towards poverty alleviation by maximising social and economic benefits for locals, enhancing cultural heritage and reducing any negative impacts on the environment.

Aristotle: A performance Impact Indicator for the OpenCL Kernels Using Local Memory

Directory of Open Access Journals (Sweden)

Jianbin Fang

2014-01-01

Full Text Available Due to the increasing complexity of multi/many-core architectures (with their mix of caches and scratch-pad memories and applications (with different memory access patterns, the performance of many workloads becomes increasingly variable. In this work, we address one of the main causes for this performance variability: the efficiency of the memory system. Specifically, based on an empirical evaluation driven by memory access patterns, we qualify and partially quantify the performance impact of using local memory in multi/many-core processors. To do so, we systematically describe memory access patterns (MAPs in an application-agnostic manner. Next, for each identified MAP, we use OpenCL (for portability reasons to generate two microbenchmarks: a “naive” version (without local memory and “an optimized” version (using local memory. We then evaluate both of them on typically used multi-core and many-core platforms, and we log their performance. What we eventually obtain is a local memory performance database, indexed by various MAPs and platforms. Further, we propose a set of composing rules for multiple MAPs. Thus, we can get an indicator of whether using local memory is beneficial in the presence of multiple memory access patterns. This indication can be used to either avoid the hassle of implementing optimizations with too little gain or, alternatively, give a rough prediction of the performance gain.

Indicator methods to evaluate the hygienic performance of industrial scale operating Biowaste Composting Plants.

Science.gov (United States)

Martens, Jürgen

2005-01-01

The hygienic performance of biowaste composting plants to ensure the quality of compost is of high importance. Existing compost quality assurance systems reflect this importance through intensive testing of hygienic parameters. In many countries, compost quality assurance systems are under construction and it is necessary to check and to optimize the methods to state the hygienic performance of composting plants. A set of indicator methods to evaluate the hygienic performance of normal operating biowaste composting plants was developed. The indicator methods were developed by investigating temperature measurements from indirect process tests from 23 composting plants belonging to 11 design types of the Hygiene Design Type Testing System of the German Compost Quality Association (BGK e.V.). The presented indicator methods are the grade of hygienization, the basic curve shape, and the hygienic risk area. The temperature courses of single plants are not distributed normally, but they were grouped by cluster analysis in normal distributed subgroups. That was a precondition to develop the mentioned indicator methods. For each plant the grade of hygienization was calculated through transformation into the standard normal distribution. It shows the part in percent of the entire data set which meet the legal temperature requirements. The hygienization grade differs widely within the design types and falls below 50% for about one fourth of the plants. The subgroups are divided visually into basic curve shapes which stand for different process courses. For each plant the composition of the entire data set out of the various basic curve shapes can be used as an indicator for the basic process conditions. Some basic curve shapes indicate abnormal process courses which can be emended through process optimization. A hygienic risk area concept using the 90% range of variation of the normal temperature courses was introduced. Comparing the design type range of variation with the

The efficiency and quality dilemma: What drives South African call centre management performance indicators?

Directory of Open Access Journals (Sweden)

Diane Banks

2011-03-01

Research purpose: This study explored the key performance indicators that drive management practices in the South African call centre industry in the context of the dilemma between efficiency and quality. Motivation for the study: The South African government has identified call centres as a method of creating jobs and foreign investment. Management practices affect centres’ performance. Understanding these practices will help to achieve these aims. Research design: The researchers used a web-based questionnaire in a survey with South African call centre managers in more than 44 different organisations that represented nine industry sectors. Main findings: This study indicated that the dilemma between efficiency and quality is prevalent in South African call centres and that efficiency key performance indicators drive management practices. Practical/managerial implications: The inconsistencies the study reported mean that South African organisations should assess the alignment between their organisational visions, the strategic intentions of their call centres and the performance measures they use to assess their call centre managers. Contribution/value-add: This study adds to the relatively small amount of empirical research available on the call centre industry in South Africa. It contributes to the industry’s attempt to position itself favourably for local and international outsourcing opportunities.

Evaluating quality indicators for patients with community-acquired pneumonia.

Science.gov (United States)

Rhew, D C; Goetz, M B; Shekelle, P G

2001-11-01

Several organizations have published evidence-based quality indicators for community-acquired pneumonia (CAP). However, there is variability in the types of indicators presented between organizations and the level of supporting evidence for each of the indicators. A systematic review of the literature and relevant Internet Web sites was performed to identify quality indicators for CAP that have been proposed or recommended by organizations, and each of the indicators was then critically appraised, using a well-defined set of criteria. The MEDLINE, EMBASE, Best Evidence, and Cochrane Systematic Review databases and Internet Web sites were searched for articles and guidelines published between January 1980 and May 2001 to identify quality indicators for CAP and relevant evidence. Experts in the area of health services research were contacted to identify additional sources. A well-defined set of criteria was applied to evaluate each of the quality indicators. The systematic review of the literature and Internet Web sites yielded 44 CAP-specific quality indicators. The critical appraisal of these indicators yielded 16 indicators that were supported by a study that identified an association between quality of care and the process of care or outcome measure, were applied to enough patients to be able to detect clinically meaningful differences, were clinically and/or economically relevant, were measurable in a clinical practice setting, and were precise in their specifications. Many organizations recommend indicators for CAP. Indicators may serve as measures of clinical performance for clinicians and hospitals, may help in benchmarking, and may ultimately facilitate improvements in quality of care and cost reductions. However, CAP indicators often vary in their meaningfulness, scientific soundness, and interpretability of results. A set of five critical appraisal questions may assist in the evaluation of which quality indicators are most valid.

Performance indicators related to women’s health

Directory of Open Access Journals (Sweden)

Kaimi Pereira Costa

2009-06-01

Full Text Available The aim of this study was to determine performance indicators related to women’s health. Data were collected from 457 women living in the State of Parana, Brazil, classified according to age: 20-29 years (N=158, 30-39 years (N=171 and 40-49 years (N=128. The following variables were analyzed: height (m, body weight (kg, BMI, waist-hip ratio, abdominal strength (repetitions, flexibility (cm, and right and left hand grip strength (kgf. Descriptive statistics, one-factor ANOVA and the Tukey post-hoc test were used for statistical analysis (p ≤ 0.05. The results showed a significant difference (p ≤ 0.05 in all categories of the variables analyzed, except for right hand grip strength (good and excellent at age 30-39 years and left hand grip strength at age 40-49 years. There was a higher incidence of inadequate BMI and waist-hip ratio and low abdominal strength among women aged 40-49 years. Low flexibility was more frequent in the 20-29 year group. The differences in right and left hand grip strength between age groups were small.

The self-determination theory applied in the analysis of motivation and academic performance of accounting students in a brazilian public university

Directory of Open Access Journals (Sweden)

Marina Salgado Borges

2017-08-01

Full Text Available The aim of this study was analyzing the relations between academic performance and motivation of Accounting students in a Brazilian public university based on Self-determination Theory. Methodologically, in order to reach that, structured questionnaires were applied in classrooms with the Brazilian version of the Academic Motivation Scale (AMS, in a sample of 316 students enrolled from second to tenth periods of that course, equivalent to 37.2% of the total number of students. Data were analyzed using descriptive statistics, exploratory factor analysis (AFE and multiple linear regression analysis with Ordinary Least Squares (OLS. The regression analyzes indicated a significant relationship between motivation and academic performance. The factors related to intrinsic motivation and extrinsic motivation by identified regulation are positively correlated with academic performance of students. On the other hand, the introjected for regulation extrinsic motivation factor is negatively correlated with student’s academic performance coefficient (CRA. Based on the sample analyzed, the results showed that the relationship between motivation and CRA of the student depends on the type of motivation that is present in each one.

Patentometrics As Performance Indicators for Allocating Research Funding to Universities

DEFF Research Database (Denmark)

Mortensen, Peter Stendahl

This paper is part of a preliminary investigation of potential indicators on the performance of universities and other public research institutions to be used for allocating general and other research funding. The paper will describe and discuss potential patentometrics and how they can be used...... in different types of analyses and evaluations in general and relating to universities and other public research institutions. Further, the relevance and possibility of including some patentometrics in the allocation of research funding is discussed. Also, other metrics regarding academic linkages...

Tamper indicating packaging

International Nuclear Information System (INIS)

Baumann, M.J.; Bartberger, J.C.; Welch, T.D.

1994-01-01

Protecting sensitive items from undetected tampering in an unattended environment is crucial to the success of non-proliferation efforts relying on the verification of critical activities. Tamper Indicating Packaging (TIP) technologies are applied to containers, packages, and equipment that require an indication of a tamper attempt. Examples include: the transportation and storage of nuclear material, the operation and shipment of surveillance equipment and monitoring sensors, and the retail storage of medicine and food products. The spectrum of adversarial tampering ranges from attempted concealment of a pin-hole sized penetration to the complete container replacement, which would involve counterfeiting efforts of various degrees. Sandia National Laboratories (SNL) has developed a technology base for advanced TIP materials, sensors, designs, and processes which can be adapted to various future monitoring systems. The purpose of this technology base is to investigate potential new technologies, and to perform basic research of advanced technologies. This paper will describe the theory of TIP technologies and recent investigations of TIP technologies at SNL

Indicators measuring the performance of malaria programs supported by the global fund in Asia, progress and the way forward.

Directory of Open Access Journals (Sweden)

Jinkou Zhao

Full Text Available INTRODUCTION: In 2010, the Global Fund provided more than 75% of external international financing for malaria control. The Global Fund uses performance based funding in the grants it finances. This paper analyses the indicators used to measure the performance of Global Fund supported malaria grants in Asia. METHODS: Indicators used in the performance frameworks for all Global Fund supported malaria grants in Asia were retrieved from grant database and grouped into impact, outcome, output and input categories and categorized by service delivery areas. Indicators of each group were compared over rounds. Indicators used in performance frameworks were compared with internationally adopted indicators included in the Monitoring and Evaluation Toolkit developed by the Global Fund and international technical agencies. RESULTS: Between 2002 and 2010, 1,434 indicators were included in the performance frameworks of the 48 malaria grants awarded in Asia, including 229 impact and 227 outcome indicators, 437 output and 541 input indicators, with an average of 29.9 indicators per grant. The proportion of impact and outcome indicators increased over rounds, with that of input indicators declining from 44.1% in Round 1 to 22.7% in Round 9. CONCLUSIONS: Input indicators, which have predominated the performance frameworks of the Global Fund supported malaria programs in Asia have declined between Rounds 1 and 9. However, increased alignment with internationally adopted indicators included in the Monitoring and Evaluation Toolkit is needed to improve the validity of reported results.