FY01 Supplemental Science and Performance Analyses, Volume 1: Scientific Bases and Analyses, Part 1 and 2

International Nuclear Information System (INIS)

Dobson, David

2001-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S and ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S and ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23 013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054] [DIRS 124754]). By making the large amount of information developed on Yucca Mountain available in stages, the DOE intends to provide the public and interested parties with time to review the available materials and to formulate

Performance Analyses in an Assistive Technology Service Delivery Process

DEFF Research Database (Denmark)

Petersen, Anne Karin

Performance Analyses in an Assistive Technology Service Delivery Process.Keywords: process model, occupational performance, assistive technologiesThe Poster is about teaching students, using models and theory in education and practice. It is related to Occupational therapy process and professional...... af top-til-bund, klientcentreret og aktivitetsbaseret interventioner, ERGO/MunksgaardFisher, A. &, Griswold, L. A., 2014. Performance Skills. I: B.Schell red.2014 Occupational Therapy. Willard &Spackman’s occupational therapy. -12th ed., p.249-264Cook A.M., Polgar J.M. (2015) Assistive Technologies...

Flexible working, individual performance and employee attitudes: comparing formal and informal arrangements

OpenAIRE

De Menezes, Lilian M.; Kelliher, Clare

2016-01-01

In the context of a wider trend to individualize HRM, this paper examines the relationship between flexible working arrangements and individual performance. Drawing on a range of theories, it examines potential indirect effects on employee performance via job satisfaction and organizational commitment and analyses whether these relationships vary according to whether the arrangement was set up through a formal process, or negotiated informally between the employee and their line manager. Exta...

Review of accident analyses performed at Mochovce NPP

International Nuclear Information System (INIS)

Siko, D.

2000-01-01

In this paper the review of accident analysis performed in NPP Mochovce V-1 is presented. The scope of these safety measures was defined and development in the T SSM for NPP Mochovce Nuclear Safety Improvements Report' issued in July 1995. The main objectives of these safety measures were the followings: (a) to establish the criteria for selection and classification of accidental events, as well as defining the list of initiating events to be analysed. Accident classification to the individual groups must be performed in accordance with RG 1.70 and IAEA recommendations 'Guidelines for Accidental Analysis of WWER NPP' (IAEA-EBR-WWER-01) to select boundary cases to be calculated from the scope of initiating events; (b ) to elaborate the accident analysis methodology that also includes acceptance criteria for their result evaluation, initial and boundary conditions, assumption related with the application of the single failure criteria, requirements on the analysis quality, used computer codes, as well as NPP models and input data for the accident analysis; (c) to perform the accident analysis for the Pre-operational Safety Report (POSAR); (d) to provide a synthetic report addressing the validity range of codes models and correlations, the assessment against relevant tests results, the evidence of the user qualification, the modernisation and nodding scheme for the plant and the justification of used computer codes. Analyses results showed that all acceptance criteria were met with satisfactory margin and design of the NPP Mochovce is accurate. (author)

Network meta-analyses performed by contracting companies and commissioned by industry

NARCIS (Netherlands)

Schuit, Ewoud; Ioannidis, John P A

2016-01-01

Background: Industry commissions contracting companies to perform network meta-analysis for health technology assessment (HTA) and reimbursement submissions. Our objective was to estimate the number of network meta-analyses performed by consulting companies contracted by industry, to assess whether

Analysing the performance of dynamic multi-objective optimisation algorithms

CSIR Research Space (South Africa)

Helbig, M

2013-06-01

Full Text Available and the goal of the algorithm is to track a set of tradeoff solutions over time. Analysing the performance of a dynamic multi-objective optimisation algorithm (DMOA) is not a trivial task. For each environment (before a change occurs) the DMOA has to find a set...

The Wider Implications of Business-model Research

DEFF Research Database (Denmark)

Ritter, Thomas; Lettl, Christopher

2018-01-01

Business-model research has struggled to develop a clear footprint in the strategic management field. This introduction to the special issue on the wider implications of business-model research argues that part of this struggle relates to the application of five different perspectives on the term...... “business model,” which creates ambiguity about the conceptual boundaries of business models, the applied terminology, and the potential contributions of business-model research to strategic management literature. By explicitly distinguishing among these five perspectives and by aligning them into one...... overarching, comprehensive framework, this paper offers a foundation for consolidating business-model research. Furthermore, we explore the connections between business-model research and prominent theories in strategic management. We conclude that business-model research is not necessarily a “theory on its...

76 FR 19380 - Notice of Entry Into Effect of MARPOL Annex V Wider Caribbean Region Special Area

Science.gov (United States)

2011-04-07

... Effect of MARPOL Annex V Wider Caribbean Region Special Area AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The Coast Guard announces the date for the entry into effect of discharge requirements from ships in the Wider Caribbean Region (WCR) special area (SA) as specified in the International Convention...

High performance liquid chromatography in pharmaceutical analyses

Directory of Open Access Journals (Sweden)

Branko Nikolin

2004-05-01

Full Text Available In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatographyreplaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography(HPLC analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1 Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or

The Wider Impacts of Universities: Habermas on Learning Processes and Universities

Directory of Open Access Journals (Sweden)

Jesper Eckhardt Larsen

2013-06-01

Full Text Available The discourse of reform in higher education tends to focus narrowly on employability and the relationship between higher education and the labor market. Universities as research institutions are now considered solely in the dominant discourse of innovation. This way of conceiving universities is inspired by functionalist theory that focuses on the imperatives of a knowledge economy. Taking a departure in the theory of society developed by Jürgen Habermas this paper seeks to provide a theoretical framework for an empirical comparative analysis on the wider societal impact of universities. It is the argument that the wider impacts of higher education and research at universities must be seen in a more complex vision of modern societies. The paper is thus primarily a re-reading of Habermas’ critique of functionalist views of the university and an application of Habermas’ critique on current issues in the debates on higher education. A special discussion will be taken on issues of the self in view of the current tendencies to regard all education from the standpoint of the economic outputs.

Site-Specific Analyses for Demonstrating Compliance with 10 CFR 61 Performance Objectives - 12179

Energy Technology Data Exchange (ETDEWEB)

Grossman, C.J.; Esh, D.W.; Yadav, P.; Carrera, A.G. [U.S. Nuclear Regulatory Commission, 11545 Rockville Pike, Rockville, MD 20852 (United States)

2012-07-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations at 10 CFR Part 61 to require low-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance with the performance objectives in Subpart C. The amendments would require licensees to conduct site-specific analyses for protection of the public and inadvertent intruders as well as analyses for long-lived waste. The amendments would ensure protection of public health and safety, while providing flexibility to demonstrate compliance with the performance objectives, for current and potential future waste streams. NRC staff intends to submit proposed rule language and associated regulatory basis to the Commission for its approval in early 2012. The NRC staff also intends to develop associated guidance to accompany any proposed amendments. The guidance is intended to supplement existing low-level radioactive waste guidance on issues pertinent to conducting site-specific analyses to demonstrate compliance with the performance objectives. The guidance will facilitate implementation of the proposed amendments by licensees and assist competent regulatory authorities in reviewing the site-specific analyses. Specifically, the guidance provides staff recommendations on general considerations for the site-specific analyses, modeling issues for assessments to demonstrate compliance with the performance objectives including the performance assessment, intruder assessment, stability assessment, and analyses for long-lived waste. This paper describes the technical basis for changes to the rule language and the proposed guidance associated with implementation of the rule language. The NRC staff, per Commission direction, intends to propose amendments to 10 CFR Part 61 to require licensees to conduct site-specific analyses to demonstrate compliance with performance objectives for the protection of public health and the environment. The amendments would require a

Sustainability rating tools for buildings and its wider application

Directory of Open Access Journals (Sweden)

Siew Renard

2017-01-01

Full Text Available This paper provides a commentary on the latest research in measuring the sustainability of buildings and its wider application. The emergence of sustainability rating tools (SRTs has faced critique from scholars due to their deficiencies such as the overemphasis on environmental criteria, the negligence of uncertainty in scoring and existence of non-scientific criteria benchmarks among many others. This could have attributed to the mixed evidence in the literature on the benefits of SRTs. Future research direction is proposed to advance the state-of-the art in this field.

Review of radionuclide source terms used for performance-assessment analyses

International Nuclear Information System (INIS)

Barnard, R.W.

1993-06-01

Two aspects of the radionuclide source terms used for total-system performance assessment (TSPA) analyses have been reviewed. First, a detailed radionuclide inventory (i.e., one in which the reactor type, decay, and burnup are specified) is compared with the standard source-term inventory used in prior analyses. The latter assumes a fixed ratio of pressurized-water reactor (PWR) to boiling-water reactor (BWR) spent fuel, at specific amounts of burnup and at 10-year decay. TSPA analyses have been used to compare the simplified source term with the detailed one. The TSPA-91 analyses did not show a significant difference between the source terms. Second, the radionuclides used in source terms for TSPA aqueous-transport analyses have been reviewed to select ones that are representative of the entire inventory. It is recommended that two actinide decay chains be included (the 4n+2 ''uranium'' and 4n+3 ''actinium'' decay series), since these include several radionuclides that have potentially important release and dose characteristics. In addition, several fission products are recommended for the same reason. The choice of radionuclides should be influenced by other parameter assumptions, such as the solubility and retardation of the radionuclides

Installation and performance evaluation of an indigenous surface area analyser

International Nuclear Information System (INIS)

Pillai, S.N.; Solapurkar, M.N.; Venkatesan, V.; Prakash, A.; Khan, K.B.; Kumar, Arun; Prasad, R.S.

2014-01-01

An indigenously available surface area analyser was installed inside glove box and checked for its performance by analyzing uranium oxide and thorium oxide powders at RMD. The unit has been made ready for analysis of Plutonium oxide powders after incorporating several important features. (author)

IN MY OPINION: Physics in the wider context

Science.gov (United States)

Morris, Andrew

1999-11-01

and progression opportunities for science specialists, whilst ensuring that the general public are scientifically literate. I think physics education has a serious contribution to make to all sections of society:The specialist, preparing for and progressing in a scientific/technological career. The skilled worker, analysing, understanding and innovating in any occupation. The citizen coping with increasing complexity in society. The individual trying to understanding the world into which they were born. To continue improving our educational systems and to assist each of these groups demands a grand alliance of people involved in physics education. Reflecting first on the wider context can help us choose appropriate points at which to intervene. Otherwise, educational improvement may be hampered, with valuable effort expended on positive reform actions rendered useless by constraints elsewhere in the system. How has the subject and its place in the curriculum evolved? What can be learned from previous curriculum innovations? What do public perceptions of physics tell us? The aim of the fifth Shaping the Future booklet is to encourage debate about where reform efforts should best be directed. Contributors will include Steve Adams, Michael Barnett, Sheila Carlton, John Berkeley, Martin Hollins, Marilyn Holyoake, Andrew Hunt, Roland Jackson, Jon Ogborn, Russell Stannard and Charles Thomas. A Discussion Meeting based on Physics in a wider context, at the ASE Annual Meeting, Leeds, promises to be lively. I hope you will come and express your views! If you would like to attend the meeting, to be held on 7 January 2000, and be sent a free copy of the manuscript for the 48 page booklet in advance, please contact: Ingrid Ebeyer, Post-16 Initiative, Institute of Physics, 76 Portland Place, London W1N 3DH (e-mail: 16-19project@iop.org)

ANALYSING PERFORMANCE ASSESSMENT IN PUBLIC SERVICES: HOW USEFUL IS THE CONCEPT OF A PERFORMANCE REGIME?

Science.gov (United States)

Martin, Steve; Nutley, Sandra; Downe, James; Grace, Clive

2016-03-01

Approaches to performance assessment have been described as 'performance regimes', but there has been little analysis of what is meant by this concept and whether it has any real value. We draw on four perspectives on regimes - 'institutions and instruments', 'risk regulation regimes', 'internal logics and effects' and 'analytics of government' - to explore how the concept of a multi-dimensional regime can be applied to performance assessment in public services. We conclude that the concept is valuable. It helps to frame comparative and longitudinal analyses of approaches to performance assessment and draws attention to the ways in which public service performance regimes operate at different levels, how they change over time and what drives their development. Areas for future research include analysis of the impacts of performance regimes and interactions between their visible features (such as inspections, performance indicators and star ratings) and the veiled rationalities which underpin them.

FY01 Supplemental Science and Performance Analysis: Volume 1, Scientific Bases and Analyses

International Nuclear Information System (INIS)

Bodvarsson, G.S.; Dobson, David

2001-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S and ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S and ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054 [DIRS 124754

FY01 Supplemental Science and Performance Analysis: Volume 1,Scientific Bases and Analyses

Energy Technology Data Exchange (ETDEWEB)

Bodvarsson, G.S.; Dobson, David

2001-05-30

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for development as a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S&ER) (DOE 2001 [DIRS 153849]), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. A decision to recommend the site has not been made: the DOE has provided the S&ER and its supporting documents as an aid to the public in formulating comments on the possible recommendation. When the S&ER (DOE 2001 [DIRS 153849]) was released, the DOE acknowledged that technical and scientific analyses of the site were ongoing. Therefore, the DOE noted in the Federal Register Notice accompanying the report (66 FR 23013 [DIRS 155009], p. 2) that additional technical information would be released before the dates, locations, and times for public hearings on the possible recommendation were announced. This information includes: (1) the results of additional technical studies of a potential repository at Yucca Mountain, contained in this FY01 Supplemental Science and Performance Analyses: Vol. 1, Scientific Bases and Analyses; and FY01 Supplemental Science and Performance Analyses: Vol. 2, Performance Analyses (McNeish 2001 [DIRS 155023]) (collectively referred to as the SSPA) and (2) a preliminary evaluation of the Yucca Mountain site's preclosure and postclosure performance against the DOE's proposed site suitability guidelines (10 CFR Part 963 [64 FR 67054 [DIRS 124754

Performance of neutron kinetics models for ADS transient analyses

International Nuclear Information System (INIS)

Rineiski, A.; Maschek, W.; Rimpault, G.

2002-01-01

Within the framework of the SIMMER code development, neutron kinetics models for simulating transients and hypothetical accidents in advanced reactor systems, in particular in Accelerator Driven Systems (ADSs), have been developed at FZK/IKET in cooperation with CE Cadarache. SIMMER is a fluid-dynamics/thermal-hydraulics code, coupled with a structure model and a space-, time- and energy-dependent neutronics module for analyzing transients and accidents. The advanced kinetics models have also been implemented into KIN3D, a module of the VARIANT/TGV code (stand-alone neutron kinetics) for broadening application and for testing and benchmarking. In the paper, a short review of the SIMMER and KIN3D neutron kinetics models is given. Some typical transients related to ADS perturbations are analyzed. The general models of SIMMER and KIN3D are compared with more simple techniques developed in the context of this work to get a better understanding of the specifics of transients in subcritical systems and to estimate the performance of different kinetics options. These comparisons may also help in elaborating new kinetics models and extending existing computation tools for ADS transient analyses. The traditional point-kinetics model may give rather inaccurate transient reaction rate distributions in an ADS even if the material configuration does not change significantly. This inaccuracy is not related to the problem of choosing a 'right' weighting function: the point-kinetics model with any weighting function cannot take into account pronounced flux shape variations related to possible significant changes in the criticality level or to fast beam trips. To improve the accuracy of the point-kinetics option for slow transients, we have introduced a correction factor technique. The related analyses give a better understanding of 'long-timescale' kinetics phenomena in the subcritical domain and help to evaluate the performance of the quasi-static scheme in a particular case. One

7 CFR 98.3 - Analyses performed and locations of laboratories.

Science.gov (United States)

2010-01-01

... the special laboratory analyses rendered by the Science and Technology as a result of an agreement... Sausage Fat, salt 4 Pork Sausage Fat, moisture 4 Pork Sausage Fat 4 Mil-P-44131A (Pork Steaks, Flaked... performed at any one of the Science and Technology (S&T) field laboratories as follows: (1) USDA, AMS...

Factors for analysing and improving performance of R&D in Malaysian universities

NARCIS (Netherlands)

Ramli, Mohammad Shakir; de Boer, S.J.; de Bruijn, E.J.

2004-01-01

This paper presents a model for analysing and improving performance of R&D in Malaysian universities. There are various general models for R&D analysis, but none is specific for improving the performance of R&D in Malaysian universities. This research attempts to fill a gap in the body of knowledge

Career-span analyses of track performance: longitudinal data present a more optimistic view of age-related performance decline.

Science.gov (United States)

Young, Bradley W; Starkes, Janet L

2005-01-01

Sport scientists (Starkes, Weir, Singh, Hodges, & Kerr, 1999; Starkes, Weir, & Young, 2003) have suggested that prolonged training is critical for the maintenance of athletic performance even in the face of predicted age-related decline. This study used polynomial regression analyses to examine the relationship between age and running performance in the 1500 and 10,000 metre events. We compared the age and career-longitudinal performances for 15 male Canadian Masters athletes with a cross-sectional sample of performances at different ages. We hypothesized that the 30 years of uninterrupted training characteristic of this longitudinal sample would moderate the patterns of age-related decline (retention hypothesis); alternatively, the cross-sectional data were expected to demonstrate pronounced age-related decline (quadratic hypothesis). Investigators performed multimodel regression analyses on the age and performance data. Based on the absence (for longitudinal data) or presence (for the cross-sectional data) of significant quadratic components in second-order polynomial models, the authors found support for their respective hypotheses. The longitudinal data showed that running performance declined with age in a more linear fashion than did cross-sectional data. Graphical trends showed that the moderation of age-related decline appeared greater for the longitudinal 10 km performances than for the 1500m event.

Total System Performance Assessment Sensitivity Analyses for Final Nuclear Regulatory Commission Regulations

International Nuclear Information System (INIS)

Bechtel SAIC Company

2001-01-01

This Letter Report presents the results of supplemental evaluations and analyses designed to assess long-term performance of the potential repository at Yucca Mountain. The evaluations were developed in the context of the Nuclear Regulatory Commission (NRC) final public regulation, or rule, 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), which was issued on November 2, 2001. This Letter Report addresses the issues identified in the Department of Energy (DOE) technical direction letter dated October 2, 2001 (Adams 2001 [DIRS 156708]). The main objective of this Letter Report is to evaluate performance of the potential Yucca Mountain repository using assumptions consistent with performance-assessment-related provisions of 10 CFR Part 63. The incorporation of the final Environmental Protection Agency (EPA) standard, 40 CFR Part 197 (66 FR 32074 [DIRS 155216]), and the analysis of the effect of the 40 CFR Part 197 EPA final rule on long-term repository performance are presented in the Total System Performance Assessment--Analyses for Disposal of Commercial and DOE Waste Inventories at Yucca Mountain--Input to Final Environmental Impact Statement and Site Suitability Evaluation (BSC 2001 [DIRS 156460]), referred to hereafter as the FEIS/SSE Letter Report. The Total System Performance Assessment (TSPA) analyses conducted and documented prior to promulgation of the NRC final rule 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), were based on the NRC proposed rule (64 FR 8640 [DIRS 101680]). Slight differences exist between the NRC's proposed and final rules which were not within the scope of the FEIS/SSE Letter Report (BSC 2001 [DIRS 156460]), the Preliminary Site Suitability Evaluation (PSSE) (DOE 2001 [DIRS 155743]), and supporting documents for these reports. These differences include (1) the possible treatment of ''unlikely'' features, events and processes (FEPs) in evaluation of both the groundwater protection standard and the human-intrusion scenario of the individual

A wider pelvis does not increase locomotor cost in humans, with implications for the evolution of childbirth.

Directory of Open Access Journals (Sweden)

Anna G Warrener

Full Text Available The shape of the human female pelvis is thought to reflect an evolutionary trade-off between two competing demands: a pelvis wide enough to permit the birth of large-brained infants, and narrow enough for efficient bipedal locomotion. This trade-off, known as the obstetrical dilemma, is invoked to explain the relative difficulty of human childbirth and differences in locomotor performance between men and women. The basis for the obstetrical dilemma is a standard static biomechanical model that predicts wider pelves in females increase the metabolic cost of locomotion by decreasing the effective mechanical advantage of the hip abductor muscles for pelvic stabilization during the single-leg support phase of walking and running, requiring these muscles to produce more force. Here we experimentally test this model against a more accurate dynamic model of hip abductor mechanics in men and women. The results show that pelvic width does not predict hip abductor mechanics or locomotor cost in either women or men, and that women and men are equally efficient at both walking and running. Since a wider birth canal does not increase a woman's locomotor cost, and because selection for successful birthing must be strong, other factors affecting maternal pelvic and fetal size should be investigated in order to help explain the prevalence of birth complications caused by a neonate too large to fit through the birth canal.

Analyses to demonstrate the thermal performance of the CASTOR KN12

International Nuclear Information System (INIS)

Diersch, R.; Weiss, M.; Tso, C.F.; Powell, D.; Choy, B.I.; Lee, H.Y.

2004-01-01

The CASTOR registered KN-12 is a new cask design of GNB for dry and wet transportation of up to 12 PWR spent nuclear fuel assemblies in Korea. It complies with the requirements of 10 CFR 71 [1] and IAEA ST-1 [2] for TYPE B(U)F packages. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. Demonstration of the cask's compliance with the regulatory requirements in the area of thermal performance has been carried out by a combination of testing carried out by Korea Atomic Energy Research Institute and analyses carried out by Arup. This paper describes the analyses to demonstrate the thermal performance of the cask and compliance with regulatory requirements under normal and hypothetical accident conditions of transport. Other aspects of the design of the CASTOR registered KN12 are presented in other papers at this conference

Hybridization Capture Using RAD Probes (hyRAD, a New Tool for Performing Genomic Analyses on Collection Specimens.

Directory of Open Access Journals (Sweden)

Tomasz Suchan

Full Text Available In the recent years, many protocols aimed at reproducibly sequencing reduced-genome subsets in non-model organisms have been published. Among them, RAD-sequencing is one of the most widely used. It relies on digesting DNA with specific restriction enzymes and performing size selection on the resulting fragments. Despite its acknowledged utility, this method is of limited use with degraded DNA samples, such as those isolated from museum specimens, as these samples are less likely to harbor fragments long enough to comprise two restriction sites making possible ligation of the adapter sequences (in the case of double-digest RAD or performing size selection of the resulting fragments (in the case of single-digest RAD. Here, we address these limitations by presenting a novel method called hybridization RAD (hyRAD. In this approach, biotinylated RAD fragments, covering a random fraction of the genome, are used as baits for capturing homologous fragments from genomic shotgun sequencing libraries. This simple and cost-effective approach allows sequencing of orthologous loci even from highly degraded DNA samples, opening new avenues of research in the field of museum genomics. Not relying on the restriction site presence, it improves among-sample loci coverage. In a trial study, hyRAD allowed us to obtain a large set of orthologous loci from fresh and museum samples from a non-model butterfly species, with a high proportion of single nucleotide polymorphisms present in all eight analyzed specimens, including 58-year-old museum samples. The utility of the method was further validated using 49 museum and fresh samples of a Palearctic grasshopper species for which the spatial genetic structure was previously assessed using mtDNA amplicons. The application of the method is eventually discussed in a wider context. As it does not rely on the restriction site presence, it is therefore not sensitive to among-sample loci polymorphisms in the restriction sites

Opportunities and challenges in the wider adoption of liver and interconnected microphysiological systems.

Science.gov (United States)

Hughes, David J; Kostrzewski, Tomasz; Sceats, Emma L

2017-10-01

Liver disease represents a growing global health burden. The development of in vitro liver models which allow the study of disease and the prediction of metabolism and drug-induced liver injury in humans remains a challenge. The maintenance of functional primary hepatocytes cultures, the parenchymal cell of the liver, has historically been difficult with dedifferentiation and the consequent loss of hepatic function limiting utility. The desire for longer term functional liver cultures sparked the development of numerous systems, including collagen sandwiches, spheroids, micropatterned co-cultures and liver microphysiological systems. This review will focus on liver microphysiological systems, often referred to as liver-on-a-chip, and broaden to include platforms with interconnected microphysiological systems or multi-organ-chips. The interconnection of microphysiological systems presents the opportunity to explore system level effects, investigate organ cross talk, and address questions which were previously the preserve of animal experimentation. As a field, microphysiological systems have reached a level of maturity suitable for commercialization and consequent evaluation by a wider community of users, in academia and the pharmaceutical industry. Here scientific, operational, and organizational considerations relevant to the wider adoption of microphysiological systems will be discussed. Applications in which microphysiological systems might offer unique scientific insights or enable studies currently feasible only with animal models are described, and challenges which might be addressed to enable wider adoption of the technologies are highlighted. A path forward which envisions the development of microphysiological systems in partnerships between academia, vendors and industry, is proposed. Impact statement Microphysiological systems are in vitro models of human tissues and organs. These systems have advanced rapidly in recent years and are now being

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Tappen, J. J.; Wasiolek, M. A.; Wu, D. W.; Schmitt, J. F.; Smith, A. J.

2002-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Jeff Tappen; M.A. Wasiolek; D.W. Wu; J.F. Schmitt

2001-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Context in a wider context

Directory of Open Access Journals (Sweden)

John Traxler

2011-07-01

Full Text Available This paper attempts to review and reconsider the role of context in mobile learning and starts by outlining definitions of context-aware mobile learning as the technologies have become more mature, more robust and more widely available and as the notion of context has become progressively richer. The future role of context-aware mobile learning is considered within the context of the future of mobile learning as it moves from the challenges and opportunities of pedagogy and technology to the challenges and opportunities of policy, scale, sustainability, equity and engagement with augmented reality, «blended learning», «learner devices», «user-generated contexts» and the «internet of things». This is essentially a perspective on mobile learning, and other forms of technology-enhanced learning (TEL, where educators and their institutions set the agenda and manage change. There are, however, other perspectives on context. The increasing availability and use of smart-phones and other personal mobile devices with similar powerful functionality means that the experience of context for many people, in the form of personalized or location-based services, is an increasingly social and informal experience, rather than a specialist or educational experience. This is part of the transformative impact of mobility and connectedness on our societies brought about by these universal, ubiquitous and pervasive technologies. This paper contributes a revised understanding of context in the wider context (sic of the transformations taking place in our societies. These are subtle but pervasive transformations of jobs, work and the economy, of our sense of time, space and place, of knowing and learning, and of community and identity. This leads to a radical reconsideration of context as the notions of ‹self› and ‹other› are transformed.

Performance assessment analyses unique to Department of Energy spent nuclear fuel

International Nuclear Information System (INIS)

Loo, H.H.; Duguid, J.J.

2000-01-01

This paper describes the iterative process of grouping and performance assessment that has led to the current grouping of the U.S. Department of Energy (DOE) spent nuclear fuel (SNF). The unique sensitivity analyses that form the basis for incorporating DOE fuel into the total system performance assessment (TSPA) base case model are described. In addition, the chemistry that results from dissolution of DOE fuel and high level waste (HLW) glass in a failed co-disposal package, and the effects of disposal of selected DOE SNF in high integrity cans are presented

A Wider Look at Visual Discomfort

Directory of Open Access Journals (Sweden)

L O'Hare

2012-07-01

Full Text Available Visual discomfort is the adverse effects reported by some on viewing certain stimuli, such as stripes and certain filtered noise patterns. Stimuli that deviate from natural image statistics might be encoded inefficiently, which could cause discomfort (Juricevic, Land, Wilkins and Webster, 2010, Perception, 39(7, 884–899, possibly through excessive cortical responses (Wilkins, 1995, Visual Stress, Oxford, Oxford University Press. A less efficient visual system might exacerbate the effects of difficult stimuli. Extreme examples are seen in epilepsy and migraines (Wilkins, Bonnanni, Prociatti, Guerrini, 2004, Epilepsia, 45, 1–7; Aurora and Wilkinson, 2007, Cephalalgia, 27(12, 1422–1435. However, similar stimuli are also seen as uncomfortable by non-clinical populations, eg, striped patterns (Wilkins et al, 1984, Brain, 107(4. We propose that oversensitivity of clinical populations may represent extreme examples of visual discomfort in the general population. To study the prevalence and impact of visual discomfort in a wider context than typically studied, an Internet-based survey was conducted, including standardised questionnaires measuring visual discomfort susceptibility (Conlon, Lovegrove, Chekaluk and Pattison, 1999, Visual Cognition, 6(6, 637–663; Evans and Stevenson, 2008, Ophthal Physiol Opt 28(4 295–309 and judgments of visual stimuli, such as striped patterns (Wilkins et al, 1984 and filtered noise patterns (Fernandez and Wilkins, 2008, Perception, 37(7 1098–1013. Results show few individuals reporting high visual discomfort, contrary to other researchers (eg, Conlon et al, 1999.

Systemic Planning: Dealing with Complexity by a Wider Approach to Planning

DEFF Research Database (Denmark)

Leleur, Steen

2005-01-01

and methodology that can be helpful for planning under circumstances characterised by complexity and uncertainty. It is argued that compared to conventional, planning – referred to as systematic planning - there is a need for a wider, more systemic approach to planning that is better suited to current real......On the basis of a new book Systemic Planning this paper addresses systems thinking and complexity in a context of planning. Specifically, renewal of planning thinking on this background is set out as so-called systemic planning (SP). The principal concern of SP is to provide principles...

Validation of Method Performance of pH, PCO2, PO2, Na(+), K(+) of Cobas b121 ABG Analyser.

Science.gov (United States)

Nanda, Sunil Kumar; Ray, Lopamudra; Dinakaran, Asha

2014-06-01

The introduction of a new method or new analyser is a common occurrence in clinical biochemistry laboratory. Blood gas measurements and electrolytes are often performed in Point-of-Care (POC) settings. When a new POC analyser is obtained, the performance of the analyser should be evaluated by comparison to the measurements with the reference analyser in the laboratory. Evaluation of method performance of pH, PCO2, PO2, Na(+), K(+) of cobas b121 ABG analyser. The evaluation of method performance of pH, PO2, PCO2, Na(+), K(+) of cobas b121 ABG analyser was done by comparing the results of 50 patient samples run on cobas b121 with the results obtained from Rapid lab values (reference analyser). Correlation coefficient was calculated from the results obtained from both the analysers. Precision was calculated by running biorad ABG control samples. The correlation coefficient values obtained for parameters were close to 1.0 indicating good correlation. The CV obtained for all the parameters were less than 5 indicating good precision. The new ABG analyser, Cobas b121 correlated well with the reference ABG analyser (Rapid Lab) and could be used to run on patient samples.

Performance analyses of naval ships based on engineering level of simulation at the initial design stage

Directory of Open Access Journals (Sweden)

Dong-Hoon Jeong

2017-07-01

Full Text Available Naval ships are assigned many and varied missions. Their performance is critical for mission success, and depends on the specifications of the components. This is why performance analyses of naval ships are required at the initial design stage. Since the design and construction of naval ships take a very long time and incurs a huge cost, Modeling and Simulation (M & S is an effective method for performance analyses. Thus in this study, a simulation core is proposed to analyze the performance of naval ships considering their specifications. This simulation core can perform the engineering level of simulations, considering the mathematical models for naval ships, such as maneuvering equations and passive sonar equations. Also, the simulation models of the simulation core follow Discrete EVent system Specification (DEVS and Discrete Time System Specification (DTSS formalisms, so that simulations can progress over discrete events and discrete times. In addition, applying DEVS and DTSS formalisms makes the structure of simulation models flexible and reusable. To verify the applicability of this simulation core, such a simulation core was applied to simulations for the performance analyses of a submarine in an Anti-SUrface Warfare (ASUW mission. These simulations were composed of two scenarios. The first scenario of submarine diving carried out maneuvering performance analysis by analyzing the pitch angle variation and depth variation of the submarine over time. The second scenario of submarine detection carried out detection performance analysis by analyzing how well the sonar of the submarine resolves adjacent targets. The results of these simulations ensure that the simulation core of this study could be applied to the performance analyses of naval ships considering their specifications.

H12: Examination of safety assessment aims, procedures and results from a wider perspective

International Nuclear Information System (INIS)

Neall, F.B; Smith, P.A.

2004-04-01

Safety assessment (SA) are a familiar tool for the evaluation of disposal concepts for radioactive waste. There is, however, often confusion in the wider community about the aims, methods and results used in SA. This report aims to present the H12 SA in a way that makes the assessment process clearer and the implications of the results more meaningful both to workers within the SA field and to a wider technical audience. The reasonableness of the assessment results, the quality of the models and databases and redundancy within the natural and engineered barrier system have been considered. A number of recent and somewhat older SAs that address a range of different waste types, host rocks and disposal concepts have been considered, and comparisons made to H12. A further aim is to put both doses and timescales in a more meaningful context. It has been necessary to: consider ways of demonstrating the meaningfulness of calculations that give results for many thousands of years in the future; provide a framework timescale as a context for SA results over long times; demonstrate the smallness of the risk associated with the doses by comparison with other radiological and non-radiological risks. The perception of risk, which is a critical issue for public acceptance of radioactive waste disposal and must be considered when seeking to present safety assessment results 'in perspective' to a wider audience, is also discussed. It is concluded that H12 is comparable in many ways to assessments carried out internationally. Some assumptions are somewhat arbitrary reflecting the generic stage of the Japanese programme, and are likely to become better founded in future exercises. Nevertheless, H12 provides a clear and well-founded message that it is feasible to site and construct a safe repository from HLW in Japan. (author)

The Wider Importance of Cadavers: Educational and Research Diversity from a Body Bequest Program

Science.gov (United States)

Cornwall, Jon; Stringer, Mark D.

2009-01-01

The debate surrounding the use of cadavers in teaching anatomy has focused almost exclusively on the pedagogic role of cadaver dissection in medical education. The aim of this study was to explore the wider aspects of a body bequest program for teaching and research into gross anatomy in a University setting. A retrospective audit was undertaken…

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate.

Science.gov (United States)

Shimadera, Hikari; Hayami, Hiroshi; Chatani, Satoru; Morino, Yu; Mori, Yasuaki; Morikawa, Tazuko; Yamaji, Kazuyo; Ohara, Toshimasa

2014-04-01

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM2.5 sulfate (SO4(2-)), nitrate (NO3(-)) and ammonium, and gaseous nitric acid (HNO3) and ammonia (NH3). The model approximately reproduced PM2.5 SO4(2-) concentration, but clearly overestimated PM2.5 NO3(-) concentration, which was attributed to overestimation of production of ammonium nitrate (NH4NO3). This study conducted sensitivity analyses of factors associated with the model performance for PM2.5 NO3(-) concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH3 emission, HNO3 and NH3 dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH3 emission directly affected NH3 concentration, and substantially affected NH4NO3 concentration. Higher dry deposition velocities of HNO3 and NH3 led to substantial reductions of concentrations of the gaseous species and NH4NO3. Because uncertainties in NH3 emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM2.5 NO3(-). The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.

Performance Assessment Modeling and Sensitivity Analyses of Generic Disposal System Concepts.

Energy Technology Data Exchange (ETDEWEB)

Sevougian, S. David; Freeze, Geoffrey A.; Gardner, William Payton; Hammond, Glenn Edward; Mariner, Paul

2014-09-01

directly, rather than through simplified abstractions. It also a llows for complex representations of the source term, e.g., the explicit representation of many individual waste packages (i.e., meter - scale detail of an entire waste emplacement drift). This report fulfills the Generic Disposal System Analysis Work Packa ge Level 3 Milestone - Performance Assessment Modeling and Sensitivity Analyses of Generic Disposal System Concepts (M 3 FT - 1 4 SN08080 3 2 ).

The ethics of drug development and promotion: the need for a wider view.

Science.gov (United States)

Brody, Howard

2012-11-01

Ethical issues at the interface between the medical profession and the pharmaceutical industry have generally been approached from the vantage point of medical professionalism, with a focus on conflict of interest as the key ethical concern. Although conflicts of interest remain important, other ethical issues may be obscured unless a wider perspective is adopted. Besides medical professionalism, the ethics of the clinical therapeutic relationship, ethics of public health, and business ethics all provide additional insights.

Multi-Stack Persistent Scatterer Interferometry Analysis in Wider Athens, Greece

Directory of Open Access Journals (Sweden)

Ioannis Papoutsis

2017-03-01

Full Text Available The wider Athens metropolitan area serves as an interesting setting for conducting geodetic studies. On the one hand, it has a complex regional geotectonic characteristic with several active and blind faults, one of which gave the deadly M w 5.9 Athens earthquake on September 1999. On the other hand, the Greek capital is heavily urbanized, and construction activities have been taking place in the last few decades to address the city’s needs for advanced infrastructures. This work focuses on estimating ground velocities for the wider Athens area in a period spanning two decades, with an extended spatial coverage, increased spatial sampling of the measurements and at high precision. The aim is to deliver to the community a reference geodetic database containing consistent and robust velocity estimates to support further studies for modeling and multi-hazard assessment. The analysis employs advanced persistent scatterer interferometry methods, covering Athens with both ascending and descending ERS-1, ERS-2 and Envisat Synthetic Aperture Radar data, forming six independent interferometric stacks. A methodology is developed and applied to exploit track diversity for decomposing the actual surface velocity field to its vertical and horizontal components and coping with the post-processing of the multi-track big data. Results of the time series analysis reveal that a large area containing the Kifisia municipality experienced non-linear motion; while it had been subsiding in the period 1992–1995 (−12 mm/year, the same area has been uplifting since 2005 (+4 mm/year. This behavior is speculated to have its origin on the regional water extraction activities, which when halted, led to a physical restoration phase of the municipality. In addition, a zoom in the area inflicted by the 1999 earthquake shows that there were zones of counter-force horizontal movement prior to the event. Further analysis is suggested to investigate the source and tectonic

Role of the anesthesiologist in the wider governance of healthcare and health economics.

Science.gov (United States)

Martin, Janet; Cheng, Davy

2013-09-01

Healthcare resources will always be limited, and as a result, difficult decisions must be made about how to allocate limited resources across unlimited demands in order to maximize health gains per resource expended. Governments and hospitals now in severe financial deficits recognize that reengagement of physicians is central to their ability to contain the runaway healthcare costs. Health economic analysis provides tools and techniques to assess which investments in healthcare provide good value for money vs which options should be forgone. Robust decision-making in healthcare requires objective consideration of evidence in order to balance clinical and economic benefits vs risks. Surveys of the literature reveal very few economic analyses related to anesthesia and perioperative medicine despite increasing recognition of the need. Now is an opportune time for anesthesiologists to become familiar with the tools and methodologies of health economics in order to facilitate and lead robust decision-making in quality-based procedures. For most technologies used in anesthesia and perioperative medicine, the responsibility to determine cost-effectiveness falls to those tasked with the governance and stewardship of limited resources for unlimited demands using best evidence plus economics at the local, regional, and national levels. Applicable cost-effectiveness, cost-utility, and cost-benefits in health economics are reviewed in this article with clinical examples in anesthesia. Anesthesiologists can make a difference in the wider governance of healthcare and health economics if we advance our knowledge and skills beyond the technical to address the "other" dimensions of decision-making--most notably, the economic aspects in a value-based healthcare system.

Results of the RAMI analyses performed for the IFMIF accelerator facility in the engineering design phase

Energy Technology Data Exchange (ETDEWEB)

Bargalló, Enric, E-mail: enric.bargallo@esss.se [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Arroyo, Jose Manuel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, Madrid (Spain); Abal, Javier; Dies, Javier; De Blas, Alfredo; Tapia, Carlos [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Moya, Joaquin; Ibarra, Angel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, Madrid (Spain)

2015-10-15

Highlights: • RAMI methodology used for IFMIF accelerator facility is presented. • Availability analyses and results are shown. • Main accelerator design changes are proposed. • Consequences and conclusions of the RAMI analyses are described. - Abstract: This paper presents a summary of the RAMI (Reliability Availability Maintainability Inspectability) analyses done for the IFMIF (International Fusion Materials Irradiation Facility) Accelerator facility in the Engineering Design Phase. The methodology followed, the analyses performed, the results obtained and the conclusions drawn are described. Moreover, the consequences of the incorporation of the RAMI studies in the IFMIF design are presented and the main outcomes of these analyses are shown.

Results of the RAMI analyses performed for the IFMIF accelerator facility in the engineering design phase

International Nuclear Information System (INIS)

Bargalló, Enric; Arroyo, Jose Manuel; Abal, Javier; Dies, Javier; De Blas, Alfredo; Tapia, Carlos; Moya, Joaquin; Ibarra, Angel

2015-01-01

Highlights: • RAMI methodology used for IFMIF accelerator facility is presented. • Availability analyses and results are shown. • Main accelerator design changes are proposed. • Consequences and conclusions of the RAMI analyses are described. - Abstract: This paper presents a summary of the RAMI (Reliability Availability Maintainability Inspectability) analyses done for the IFMIF (International Fusion Materials Irradiation Facility) Accelerator facility in the Engineering Design Phase. The methodology followed, the analyses performed, the results obtained and the conclusions drawn are described. Moreover, the consequences of the incorporation of the RAMI studies in the IFMIF design are presented and the main outcomes of these analyses are shown.

Engaging wider publics with studying and protecting the ocean

Science.gov (United States)

Nauen, Cornelia E.

2015-04-01

The ocean is dying. The vast scientific literature diagnoses massive reductions in the biomass of fish and invertebrates from overfishing, increasing destruction of coral ecosystems in the tropics from climate change, extensive dead zones from eutrophication and collapse of marine bird populations from ingesting plastic. Even though Darwin suspected already The scale is becoming apparent only from meta-analyses at regional or even global scales as individual studies tend to focus on one fishery or one type of organisms or geographic location. In combination with deep rooted perceptions of the vastness of the ocean the changes are difficult to comprehend for specialists and the general public alike. Even though more than half of humanity is estimated to live in coastal zones as defined by some, urbanisation is removing about half from regular, more direct exposure. Yet, there is much still to be explored, not only in the deep, little studied, parts. The ocean exercises great fascination on many people heightened since the period of discovery and the mystery of far-flung places, but the days, when Darwin's research results were regularly discussed in public spaces are gone. Rachel Carson's prize-winning and best selling book "The Sea Around Us", some serialised chapters in magazines and condensations in "Reader's Digest" transported the poetic rendering of science again to a wider public. But compared to the diversity of scientific inquiry about the ocean and importance for life-support system earth there is much room for engaging ocean science in the broad sense with larger and diverse publics. Developing new narratives rooted in the best available sciences is among the most promising modes of connecting different areas of scientific inquiry and non-specialists alike. We know at latest since Poincaré's famous dictum that "the facts don't speak". However, contextualised information can capture the imagination of the many and thus also reveal unexpected connections

Study on the atmospheric component with the scope of analyses on the environmental impact

International Nuclear Information System (INIS)

Ferrara, V.; La Camera, F.

1989-03-01

This work has been carried out following a specific request from Italian National Department for Environment and shows technical approaches and methodologies of analyses and forecasts set up for environmental impact studies referred to 'atmospheric environment'. This work is presented according to the general items and objectives fixed by the same Department in the wider operative system for the application in Italy of environmental impact procedures. (author)

IRE (Institut National des Radioelements) site in Belgium. Report of in situ measurements and analyses performed for the RTBF

International Nuclear Information System (INIS)

2010-05-01

This document reports various analyses performed within the frame of the preparation and filming of a TV documentary on the Belgium National Institute of Radio-elements. It reports gamma radiation measurements performed at the vicinity of the institute, discusses the possible origin of its increase at the vicinity of the institute, analyses of sludge samples coming from a wastewater treatment works, and analyses of milk, cabbage, mosses and sediments collected by residents

IOC-UNEP regional workshop to review priorities for marine pollution monitoring, research, control and abatement in the wider Caribbean

International Nuclear Information System (INIS)

1989-01-01

The IOC-UNEP Regional Workshop to Review Priorities for Marine Pollution Monitoring, Research, Control and Abatement in the Wider Caribbean Region (San Jose, 24-30 August 1989) examined a possible general framework for a regionally co-ordinated comprehensive joint IOC/UNEP programme for marine pollution assessment and control in the Wider Caribbean region (CEPPOL). The overall objective of CEPPOL is to establish a regionally co-ordinated comprehensive joint IOC/UNEP Marine Pollution Assessment and Control Programme catering to the immediate and long-term requirements of the Cartagena Convention as well as the requirements of the member States of IOCARIBE. The specific objectives of the programmes are: (i) To organize and carry out a regionally co-ordinated marine pollution monitoring and research programme concentrating on contaminants and pollutants affecting the quality of the marine and coastal environment, as well as the human health in the Wider Caribbean and to interpret/assess the results of the programme as part of the scientific basis for the region; (ii) To generate information on the sources, levels, amounts, trends and effects of marine pollution within the Wider Caribbean region as an additional component of the scientific basis upon which the formulation of proposals for preventive and remedial actions can be based; (iii) To formulate proposals for technical, administrative and legal pollution control, abatement, and preventive measures and to assist the Governments in the region in implementing and evaluating their effectiveness; and (iv) To strengthen and , when necessary, to develop/establish the capabilities of national institutions to carry out marine pollution monitoring and research, as well as to formulate and apply pollution control and abatement measures

Disease Prevention in the Age of Convergence - the Need for a Wider, Long Ranging and Collaborative Vision

Directory of Open Access Journals (Sweden)

Susan L. Prescott

2014-01-01

Full Text Available It is time to bring our imagination, creativity and passion to the fore in solving the global challenges of our age. Our global health crisis and the pandemic of noncommunicable diseases (NCDs is clearly rooted in complex modern societal and environmental changes, many of which have effects on developing immune and metabolic responses. It is intimately related to wider environmental challenges. And it is unsurprising that many NCDs share similar risk factors and that many are associated with a rising predisposition for inflammation. Allergy is one of the earliest signs of environmental impact on these biological pathways, and may also offer an early barometer to assess the effects of early interventions. There is dawning awareness of how changing microbial diversity, nutritional patterns, sedentary indoor behaviours and modern pollutants adversely affect early metabolic and immune development, but still much to understand the complexity of these interactions. Even when we do harness the science and technology, these will not provide solutions unless we also address the wider social, cultural and economic determinants of health - addressing the interconnections between human health and the health of our environment. Now more than ever, we need a wider vision and a greater sense of collective responsibility. We need long-range approaches that aim for life long benefits of a ‘healthier start to life’, and stronger cross-sectoral collaborations to prevent disease. We need to give both our hearts and our minds to solving these global issues.

The RISMC approach to perform advanced PRA analyses - 15332

International Nuclear Information System (INIS)

Mandelli, D.; Smith, C.; Riley, T.; Nielsen, J.; Alfonsi, A.; Rabiti, C.; Cogliati, J.

2015-01-01

The existing fleet of nuclear power plants is in the process of extending its lifetime and increasing the power generated from these plants via power up-rates. In order to evaluate the impact of these two factors on the safety of the plant, the RISMC (Risk Informed Safety Margin Characterization) Pathway aims to develop simulation-based tools and methods to assess risks for existing nuclear power plants in order to optimize safety. This pathway, by developing new methods, is extending the state-of-the-practice methods that have been traditionally based on logic structures such as Event-Trees and Fault-Trees. These static types of models mimic system response in an inductive and deductive way respectively, yet are restrictive in the ways they can represent spatial and temporal constructs. RISMC analyses are performed by using a combination of thermal-hydraulic codes and a stochastic analysis tool (RAVEN)currently under development at the Idaho National Laboratory. This paper presents a case study in order to show the capabilities of the RISMC methodology to assess impact of power up-rate of a boiling water reactor system during a station blackout accident scenario. We employ the system simulator code, RELAP5-3D, coupled with RAVEN which perform the stochastic analysis. Our analysis is in fact performed by: 1) sampling values of a set of parameters from the uncertainty space of interest, 2) simulating the system behavior for that specific set of parameter values and 3) analyzing the set of simulation runs. Results obtained give a detailed investigation of the issues associated with a plant power up-rate including the effects of station blackout accident scenarios. We are able to quantify how the timing of specific events was impacted by a higher nominal reactor core power. Such safety insights can provide useful information to the decision makers to perform risk informed margins management

Performance of Generating Plant: Managing the Changes. Part 4: Markets and Risk Management Strategy

Energy Technology Data Exchange (ETDEWEB)

Moss, Terry; Loedolff, Gerhard; Griffin, Rob; Kydd, Robert; Micali, Vince [Eskom (South Africa)

2008-05-15

The WEC Committee on the Performance of Generating Plant (PGP) has been collecting and analysing power plant performance statistics worldwide for more than 30 years and has produced regular reports, which include examples of advanced techniques and methods for improving power plant performance through benchmarking. A series of reports from the various working groups was issued in 2008. This reference presents the results of Working Group 4 (WG4). WG4 will monitor the development of power markets, in particular from the market risk management point of view, including operational risks. It will assess various risk management strategies used by market players around the world and develop recommendations for a wider deployment of successful strategies. The report covers the project approach and outcomes.

TRAC analyses of severe overcooling transients for the Oconee-1 PWR

Energy Technology Data Exchange (ETDEWEB)

Ireland, J R [comp.

1985-05-01

This report describes the results of several Transient Reactor Analysis Code (TRAC)-PF1 calculations of overcooling transients in a Babcock and Wilcox lowered-loop, pressurized water reactor (Oconee-1). The purpose of this study is to provide detailed input on thermal-hydraulic data to Oak Ridge National Laboratory for pressurized thermal-shock analyses. The transient calculations performed were plant specific in that details of the primary system, the secondary system, and the plant-integrated control system of Oconee-1 were included in the TRAC input model. The results of the calculations indicate that the turbine-bypass valve failure transient was the most severe in terms of resulting in relatively cold liquid temperatures in the downcomer region of the vessel. The power-operated relief valve loss-of-coolant accident transient was the least severe in terms of downcomer liquid temperatures because of vent-valve fluid mixing and near-saturated conditions in the primary system. It is recommended that future calculations consider a wider range of operator actions to cover the spectra of overcooling transient sequences more completely. 6 refs., 287 figs., 32 tabs.

TRAC analyses of severe overcooling transients for the Oconee-1 PWR

International Nuclear Information System (INIS)

Ireland, J.R.

1985-05-01

This report describes the results of several Transient Reactor Analysis Code (TRAC)-PF1 calculations of overcooling transients in a Babcock and Wilcox lowered-loop, pressurized water reactor (Oconee-1). The purpose of this study is to provide detailed input on thermal-hydraulic data to Oak Ridge National Laboratory for pressurized thermal-shock analyses. The transient calculations performed were plant specific in that details of the primary system, the secondary system, and the plant-integrated control system of Oconee-1 were included in the TRAC input model. The results of the calculations indicate that the turbine-bypass valve failure transient was the most severe in terms of resulting in relatively cold liquid temperatures in the downcomer region of the vessel. The power-operated relief valve loss-of-coolant accident transient was the least severe in terms of downcomer liquid temperatures because of vent-valve fluid mixing and near-saturated conditions in the primary system. It is recommended that future calculations consider a wider range of operator actions to cover the spectra of overcooling transient sequences more completely. 6 refs., 287 figs., 32 tabs

Markov counting and reward processes for analysing the performance of a complex system subject to random inspections

International Nuclear Information System (INIS)

Ruiz-Castro, Juan Eloy

2016-01-01

In this paper, a discrete complex reliability system subject to internal failures and external shocks, is modelled algorithmically. Two types of internal failure are considered: repairable and non-repairable. When a repairable failure occurs, the unit goes to corrective repair. In addition, the unit is subject to external shocks that may produce an aggravation of the internal degradation level, cumulative damage or extreme failure. When a damage threshold is reached, the unit must be removed. When a non-repairable failure occurs, the device is replaced by a new, identical one. The internal performance and the external damage are partitioned in performance levels. Random inspections are carried out. When an inspection takes place, the internal performance of the system and the damage caused by external shocks are observed and if necessary the unit is sent to preventive maintenance. If the inspection observes minor state for the internal performance and/or external damage, then these states remain in memory when the unit goes to corrective or preventive maintenance. Transient and stationary analyses are performed. Markov counting and reward processes are developed in computational form to analyse the performance and profitability of the system with and without preventive maintenance. These aspects are implemented computationally with Matlab. - Highlights: • A multi-state device is modelled in an algorithmic and computational form. • The performance is partitioned in multi-states and degradation levels. • Several types of failures with repair times according to degradation levels. • Preventive maintenance as response to random inspection is introduced. • The performance-profitable is analysed through Markov counting and reward processes.

Wider-community Segregation and the Effect of Neighbourhood Ethnic Diversity on Social Capital: An Investigation into Intra-Neighbourhood Trust in Great Britain and London.

Science.gov (United States)

Laurence, James

2017-10-01

Extensive research has demonstrated that neighbourhood ethnic diversity is negatively associated with intra-neighbourhood social capital. This study explores the role of segregation and integration in this relationship. To do so it applies three-level hierarchical linear models to two sets of data from across Great Britain and within London, and examines how segregation across the wider-community in which a neighbourhood is nested impacts trust amongst neighbours. This study replicates the increasingly ubiquitous finding that neighbourhood diversity is negatively associated with neighbour-trust. However, we demonstrate that this relationship is highly dependent on the level of segregation across the wider-community in which a neighbourhood is nested. Increasing neighbourhood diversity only negatively impacts neighbour-trust when nested in more segregated wider-communities. Individuals living in diverse neighbourhoods nested within integrated wider-communities experience no trust-penalty. These findings show that segregation plays a critical role in the neighbourhood diversity/trust relationship, and that its absence from the literature biases our understanding of how ethnic diversity affects social cohesion.

Dry critical experiments and analyses performed in support of the Topaz-2 Safety Program

International Nuclear Information System (INIS)

Pelowitz, D.B.; Sapir, J.; Glushkov, E.S.; Ponomarev-Stepnoi, N.N.; Bubelev, V.G.; Kompanietz, G.B.; Krutov, A.M.; Polyakov, D.N.; Loynstev, V.A.

1994-01-01

In December 1991, the Strategic Defense Initiative Organization decided to investigate the possibility of launching a Russian Topaz-2 space nuclear power system. Functional safety requirements developed for the Topaz mission mandated that the reactor remain subcritical when flooded and immersed in water. Initial experiments and analyses performed in Russia and the United States indicated that the reactor could potentially become supercritical in several water- or sand-immersion scenarios. Consequently, a series of critical experiments was performed on the Narciss M-II facility at the Kurchatov Institute to measure the reactivity effects of water and sand immersion, to quantify the effectiveness of reactor modifications proposed to preclude criticality, and to benchmark the calculational methods and nuclear data used in the Topaz-2 safety analyses. In this paper we describe the Narciss M-II experimental configurations along with the associated calculational models and methods. We also present and compare the measured and calculated results for the dry experimental configurations

Dry critical experiments and analyses performed in support of the TOPAZ-2 safety program

International Nuclear Information System (INIS)

Pelowitz, D.B.; Sapir, J.; Glushkov, E.S.; Ponomarev-Stepnoi, N.N.; Bubelev, V.G.; Kompanietz, G.B.; Krutov, A.M.; Polyakov, D.N.; Lobynstev, V.A.

1995-01-01

In December 1991, the Strategic Defense Initiative Organization decided to investigate the possibility of launching a Russian Topaz-2 space nuclear power system. Functional safety requirements developed for the Topaz mission mandated that the reactor remain subcritical when flooded and immersed in water. Initial experiments and analyses performed in Russia and the United States indicated that the reactor could potentially become supercritical in several water- or sand-immersion scenarios. Consequently, a series of critical experiments was performed on the Narciss M-II facility at the Kurchatov Institute to measure the reactivity effects of water and sand immersion, to quantify the effectiveness of reactor modifications proposed to preclude criticality, and to benchmark the calculational methods and nuclear data used in the Topaz-2 safety analyses. In this paper we describe the Narciss M-II experimental configurations along with the associated calculational models and methods. We also present and compare the measured and calculated results for the dry experimental configurations. copyright 1995 American Institute of Physics

Towards a wider dialogue

CERN Multimedia

2012-01-01

This week, I had the rewarding experience of taking part in a Wilton Park meeting examining three very different world-views: science, philosophy and theology. Wilton Park describes itself as a forum for analysing and advancing the agenda on global policy challenges, and over the years it has developed an enviable reputation for delivering authoritative reports drawn from bringing international experts together under the same roof for two days to discuss issues of topical relevance.   Participation is by invitation and there are no observers: everyone is there because they have something to bring to the discussion. Wilton Park reports always have their finger on the zeitgeist, appropriately, perhaps, for an institution born of Winston Churchill’s vision for reconciliation and dialogue in post-war Europe. When I learned that Wilton Park was running a series of meetings examining the role of religion in modern society, and that it was looking at the possibility of holding an event in...

Comparative analyses on dynamic performances of photovoltaic–thermal solar collectors integrated with phase change materials

International Nuclear Information System (INIS)

Su, Di; Jia, Yuting; Alva, Guruprasad; Liu, Lingkun; Fang, Guiyin

2017-01-01

Highlights: • The dynamic model of photovoltaic–thermal collector with phase change material was developed. • The performances of photovoltaic–thermal collector are performed comparative analyses. • The performances of photovoltaic–thermal collector with phase change material were evaluated. • Upper phase change material mode can improve performances of photovoltaic–thermal collector. - Abstract: The operating conditions (especially temperature) of photovoltaic–thermal solar collectors have significant influence on dynamic performance of the hybrid photovoltaic–thermal solar collectors. Only a small percentage of incoming solar radiation can be converted into electricity, and the rest is converted into heat. This heat leads to a decrease in efficiency of the photovoltaic module. In order to improve the performance of the hybrid photovoltaic–thermal solar collector, we performed comparative analyses on a hybrid photovoltaic–thermal solar collector integrated with phase change material. Electrical and thermal parameters like solar cell temperature, outlet temperature of air, electrical power, thermal power, electrical efficiency, thermal efficiency and overall efficiency are simulated and analyzed to evaluate the dynamic performance of the hybrid photovoltaic–thermal collector. It is found that the position of phase change material layer in the photovoltaic–thermal collector has a significant effect on the performance of the photovoltaic–thermal collector. The results indicate that upper phase change material mode in the photovoltaic–thermal collector can significantly improve the thermal and electrical performance of photovoltaic–thermal collector. It is found that overall efficiency of photovoltaic–thermal collector in ‘upper phase change material’ mode is 10.7% higher than that in ‘no phase change material’ mode. Further, for a photovoltaic–thermal collector with upper phase change material, it is verified that 3 cm

Current Approaches to Tactical Performance Analyses in Soccer Using Position Data.

Science.gov (United States)

Memmert, Daniel; Lemmink, Koen A P M; Sampaio, Jaime

2017-01-01

Tactical match performance depends on the quality of actions of individual players or teams in space and time during match-play in order to be successful. Technological innovations have led to new possibilities to capture accurate spatio-temporal information of all players and unravel the dynamics and complexity of soccer matches. The main aim of this article is to give an overview of the current state of development of the analysis of position data in soccer. Based on the same single set of position data of a high-level 11 versus 11 match (Bayern Munich against FC Barcelona) three different promising approaches from the perspective of dynamic systems and neural networks will be presented: Tactical performance analysis revealed inter-player coordination, inter-team and inter-line coordination before critical events, as well as team-team interaction and compactness coefficients. This could lead to a multi-disciplinary discussion on match analyses in sport science and new avenues for theoretical and practical implications in soccer.

A physical and engineering study on the irradiation techniques in neutron capture therapy aiming for wider application

International Nuclear Information System (INIS)

Sakurai, Y.; Ono, K.; Suzuki, M.; Katoh, I.; Miyatake, S.-I.; Yanagie, H.

2003-01-01

The solo-irradiation of thermal neutrons has been applied for brain cancer and malignant melanoma in the boron neutron capture therapy (BNCT) at the medical irradiation facility of Kyoto University Reactor (KUR), from the first clinical trial in 1974. In 1997, after the facility remodeling, the application of the mix-irradiation of thermal and epi-thermal neutrons was started, and the depth dose distribution for brain cancer has been improved in some degree. In 2001, the solo-irradiation of epi-thermal neutrons also started. It is specially mentioned that the application to oral cancers started at the same time. The BNCT clinical trial using epi-thermal neutron irradiation at KUR, amounts to twelve as of March 2003. The seven trials; more than a half of the total trials, are for oral cancers. From this fact, we think that the wider application to the other cancers is required for the future prosperity of BNCT. The cancers applied for BNCT in KUR at the present time, are brain cancer, melanoma and oral cancers, as mentioned above. The cancers, expected to be applied in near future, are liver cancer, pancreas cancer, lung cancer, tongue cancer, breast cancer, etc.. Any cancer is almost incurable by the other therapy including the other radiation therapy. In the wider application of BNCT to these cancers, the dose-distribution control suitable to each cancer and/or each part, is important. The introduction of multi-directional and/or multi-divisional irradiation is also needed. Here, a physical and engineering study using two-dimensional transport calculation and three-dimensional Monte-Carlo simulation for the irradiation techniques in BNCT aiming for wider application is reported

Evaluating transient performance of servo mechanisms by analysing stator current of PMSM

Science.gov (United States)

Zhang, Qing; Tan, Luyao; Xu, Guanghua

2018-02-01

Smooth running and rapid response are the desired performance goals for the transient motions of servo mechanisms. Because of the uncertain and unobservable transient behaviour of servo mechanisms, it is difficult to evaluate their transient performance. Under the effects of electromechanical coupling, the stator current signals of a permanent-magnet synchronous motor (PMSM) potentially contain the performance information regarding servo mechanisms in use. In this paper, a novel method based on analysing the stator current of the PMSM is proposed for quantifying the transient performance. First, a vector control model is constructed to simulate the stator current behaviour in the transient processes of consecutive speed changes, consecutive load changes, and intermittent start-stops. It is discovered that the amplitude and frequency of the stator current are modulated by the transient load torque and motor speed, respectively. The stator currents under different performance conditions are also simulated and compared. Then, the stator current is processed using a local means decomposition (LMD) algorithm to extract the instantaneous amplitude and instantaneous frequency. The sample entropy of the instantaneous amplitude, which reflects the complexity of the load torque variation, is calculated as a performance indicator of smooth running. The peak-to-peak value of the instantaneous frequency, which defines the range of the motor speed variation, is set as a performance indicator of rapid response. The proposed method is applied to both simulated data in an intermittent start-stops process and experimental data measured for a batch of servo turrets for turning lathes. The results show that the performance evaluations agree with the actual performance.

Disturbance rejection performance analyses of closed loop control systems by reference to disturbance ratio.

Science.gov (United States)

Alagoz, Baris Baykant; Deniz, Furkan Nur; Keles, Cemal; Tan, Nusret

2015-03-01

This study investigates disturbance rejection capacity of closed loop control systems by means of reference to disturbance ratio (RDR). The RDR analysis calculates the ratio of reference signal energy to disturbance signal energy at the system output and provides a quantitative evaluation of disturbance rejection performance of control systems on the bases of communication channel limitations. Essentially, RDR provides a straightforward analytical method for the comparison and improvement of implicit disturbance rejection capacity of closed loop control systems. Theoretical analyses demonstrate us that RDR of the negative feedback closed loop control systems are determined by energy spectral density of controller transfer function. In this manner, authors derived design criteria for specifications of disturbance rejection performances of PID and fractional order PID (FOPID) controller structures. RDR spectra are calculated for investigation of frequency dependence of disturbance rejection capacity and spectral RDR analyses are carried out for PID and FOPID controllers. For the validation of theoretical results, simulation examples are presented. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

The Arabic culture of Jordan and its impacts on a wider Jordanian adoption of business continuity management.

Science.gov (United States)

Sawalha, Ihab H; Meaton, Julia

2012-01-01

Culture is important to individuals and societies, as well as organisations. Failing to address cultural aspects will hinder the wider adoption and development of business continuity management (BCM) and will subsequently increase the vulnerabilities of organisations to crises, disasters and business interruptions. Three main issues are discussed in this paper. The first is the background to culture and the characteristics of the Jordanian culture. Secondly, the influence of the Arab culture on the wider adoption and development of BCM in Jordan is considered. Thirdly, the paper looks at potential factors that underpin the role of culture in the BCM process in Jordan. These issues are significant, as they represent the characteristics and influence of the Arab culture. This paper contributes to the understanding of the significance of culture in the adoption and development of BCM for organisations operating in Jordan and in the Arab world more generally. It also highlights current cultural changes and trends taking place in the Arab world in a time of huge political instability in the Middle East and Arab countries.

Crafting a Wider Strategy for Conflict Management in the Neighbourhood? A Comparative Perspective on the European Union’s Civilian Missions in Georgia and Kosovo

Directory of Open Access Journals (Sweden)

Monica Oproiu

2015-06-01

Full Text Available The European Union’s wider neighbourhood hosts some of the world’s main unresolved conflicts. As the EU developed its foreign and security policy, a blend of internal security and external stability concerns, as well as the reference to international legal and humanitarian norms, required it to try tackling (some of these conflicts. Through both the European Neighbourhood Policy and the Stabilisation and Association Process the EU establishes contractual relations with its neighbours and tries to incentivise them for the adoption of economic and political reforms and legislative approximation to EU standards. Also, in some cases, the EU is providing support for conflict management through political dialogue, financial assistance or deployment of missions under the Common Security and Defence Policy. At its core, this paper is concerned with comparatively analysing the degree of integration between CSDP and the ENP and SAP frameworks respectively. The comparative case-study will therefore analyse CSDP missions undertaken in the Georgia/ Abkhazia and South Ossetia and Kosovo/Serbia cases, in order to identify common challenges across the two EU policy frameworks for its neighbourhood and to explore the perspectives for the emergence of an EU strategy of conflict management based on CSDP operations and various forms of engaging third countries.

Output performance analyses of solar array on stratospheric airship with thermal effect

International Nuclear Information System (INIS)

Li, Jun; Lv, Mingyun; Tan, Dongjie; Zhu, Weiyu; Sun, Kangwen; Zhang, Yuanyuan

2016-01-01

Highlights: • A model investigating the output power of solar array is proposed. • The output power in the cruise condition with thermal effect is researched. • The effect of some factors on output performance is discussed in detail. • A suitable transmissivity of external layer is crucial in preliminary design step. - Abstract: Output performance analyses of the solar array are very critical for solving the energy problem of a long endurance stratospheric airship, and the solar cell efficiency is very sensitive to temperature of the solar cell. But the research about output performance of solar array with thermal effect is rare. This paper outlines a numerical model including the thermal model of airship and solar cells, the incident solar radiation model on the solar array, and the power output model. Based on this numerical model, a MATLAB computer program is developed. In the course of the investigation, the comparisons of the simulation results with and without considering thermal effect are reported. Furthermore, effects of the transmissivity of external encapsulation layer of solar array and wind speed on the thermal performance and output power of solar array are discussed in detail. The results indicate that this method is helpful for planning energy management.

The Nursing Performance Instrument: Exploratory and Confirmatory Factor Analyses in Registered Nurses.

Science.gov (United States)

Sagherian, Knar; Steege, Linsey M; Geiger-Brown, Jeanne; Harrington, Donna

2018-04-01

The optimal performance of nurses in healthcare settings plays a critical role in care quality and patient safety. Despite this importance, few measures are provided in the literature that evaluate nursing performance as an independent construct from competencies. The nine-item Nursing Performance Instrument (NPI) was developed to fill this gap. The aim of this study was to examine and confirm the underlying factor structure of the NPI in registered nurses. The design was cross-sectional, using secondary data collected between February 2008 and April 2009 for the "Fatigue in Nursing Survey" (N = 797). The sample was predominantly dayshift female nurses working in acute care settings. Using Mplus software, exploratory and confirmatory factor analyses were applied to the NPI data, which were divided into two equal subsamples. Multiple fit indices were used to evaluate the fit of the alternative models. The three-factor model was determined to fit the data adequately. The factors that were labeled as "physical/mental decrements," "consistent practice," and "behavioral change" were moderately to strongly intercorrelated, indicating good convergent validity. The reliability coefficients for the subscales were acceptable. The NPI consists of three latent constructs. This instrument has the potentialto be used as a self-monitoring instrument that addressesnurses' perceptions of performance while providing patient care.

Earlinet database: new design and new products for a wider use of aerosol lidar data

Science.gov (United States)

Mona, Lucia; D'Amico, Giuseppe; Amato, Francesco; Linné, Holger; Baars, Holger; Wandinger, Ulla; Pappalardo, Gelsomina

2018-04-01

The EARLINET database is facing a complete reshaping to meet the wide request for more intuitive products and to face the even wider request related to the new initiatives such as Copernicus, the European Earth observation programme. The new design has been carried out in continuity with the past, to take advantage from long-term database. In particular, the new structure will provide information suitable for synergy with other instruments, near real time (NRT) applications, validation and process studies and climate applications.

Phytochemical Profile of Erythrina variegata by Using High-Performance Liquid Chromatography and Gas Chromatography-Mass Spectroscopy Analyses

OpenAIRE

Suriyavathana Muthukrishnan; Subha Palanisamy; Senthilkumar Subramanian; Sumathi Selvaraj; Kavitha Rani Mari; Ramalingam Kuppulingam

2016-01-01

Natural products derived from plant sources have been utilized to treat patients with numerous diseases. The phytochemical constituents present in ethanolic leaf extract of Erythrina variegata (ELEV) were identified by using high-performance liquid chromatography (HPLC) and gas chromatography-mass spectroscopy (GC-MS) analyses. Shade dried leaves were powdered and extracted with ethanol for analyses through HPLC to identify selected flavonoids and through GC-MS to identify other molecules. Th...

The long-term safety and performance analyses of the surface disposal facility for the Belgian category a waste at Dessel

Energy Technology Data Exchange (ETDEWEB)

Cool, Wim; Vermarien, Elise; Wacquier, William [ONDRAF/NIRAS Avenue des Arts 14, BE-1210 Bruxelles (Belgium); Perko, Janez [SCK-CEN Boeretang 200, BE-2400 Mol (Belgium)

2013-07-01

ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste and Enriched Fissile Materials, and its partners have developed long-term safety and performance analyses in the framework of the license application for a surface disposal facility for low level radioactive waste (category A waste) at Dessel, Belgium. This paper focusses on the methodology of the safety assessments and on key results from the application of this methodology. An overview is given (1) of the performance analyses for the containment safety function of the disposal system and (2) of the radiological impact analyses confirming that radiological impacts are below applicable reference values and constraints and leading to radiological criteria for the waste and the facility. In this discussion, multiple indicators for performance and safety are used to illustrate the multi-faceted nature of long-term performance and safety of the surface disposal. This contributes to the multiple lines of reasoning for confidence building that a positive decision to proceed to the next stage of construction is justified. (authors)

Genome wide analyses of metal responsive genes in Caenorhabditis elegans

Directory of Open Access Journals (Sweden)

Michael eAschner

2012-04-01

Full Text Available Metals are major contaminants that influence human health. Many metals have physiologic roles, but excessive levels can be harmful. Advances in technology have made toxicogenomic analyses possible to characterize the effects of metal exposure on the entire genome. Much of what is known about cellular responses to metals has come from mammalian systems; however the use of non-mammalian species is gaining wider attention. Caenorhabditis elegans (C. elegans is a small round worm whose genome has been fully sequenced and its development from egg to adult is well characterized. It is an attractive model for high throughput screens due to its short lifespan, ease of genetic mutability, low cost and high homology with humans. Research performed in C. elegans has led to insights in apoptosis, gene expression and neurodegeneration, all of which can be altered by metal exposure. Additionally, by using worms one can potentially study how the mechanisms that underline differential responses to metals in nematodes and humans, allowing for identification of novel pathways and therapeutic targets. In this review, toxicogenomic studies performed in C. elegans exposed to various metals will be discussed, highlighting how this non-mammalian system can be utilized to study cellular processes and pathways induced by metals. Recent work focusing on neurodegeneration in Parkinson’s disease will be discussed as an example of the usefulness of genetic screens in C. elegans and the novel findings that can be produced.

Determination of Equine Cytochrome c Backbone Amide Hydrogen/Deuterium Exchange Rates by Mass Spectrometry Using a Wider Time Window and Isotope Envelope.

Science.gov (United States)

Hamuro, Yoshitomo

2017-03-01

A new strategy to analyze amide hydrogen/deuterium exchange mass spectrometry (HDX-MS) data is proposed, utilizing a wider time window and isotope envelope analysis of each peptide. While most current scientific reports present HDX-MS data as a set of time-dependent deuteration levels of peptides, the ideal HDX-MS data presentation is a complete set of backbone amide hydrogen exchange rates. The ideal data set can provide single amide resolution, coverage of all exchange events, and the open/close ratio of each amide hydrogen in EX2 mechanism. Toward this goal, a typical HDX-MS protocol was modified in two aspects: measurement of a wider time window in HDX-MS experiments and deconvolution of isotope envelope of each peptide. Measurement of a wider time window enabled the observation of deuterium incorporation of most backbone amide hydrogens. Analysis of the isotope envelope instead of centroid value provides the deuterium distribution instead of the sum of deuteration levels in each peptide. A one-step, global-fitting algorithm optimized exchange rate and deuterium retention during the analysis of each amide hydrogen by fitting the deuterated isotope envelopes at all time points of all peptides in a region. Application of this strategy to cytochrome c yielded 97 out of 100 amide hydrogen exchange rates. A set of exchange rates determined by this approach is more appropriate for a patent or regulatory filing of a biopharmaceutical than a set of peptide deuteration levels obtained by a typical protocol. A wider time window of this method also eliminates false negatives in protein-ligand binding site identification. Graphical Abstract ᅟ.

Wider income gaps, wider waistbands? An ecological study of obesity and income inequality.

Science.gov (United States)

Pickett, Kate E; Kelly, Shona; Brunner, Eric; Lobstein, Tim; Wilkinson, Richard G

2005-08-01

To see if obesity, deaths from diabetes, and daily calorie intake are associated with income inequality among developed countries. Ecological study of 21 developed countries.Countries: Countries were eligible for inclusion if they were among the top 50 countries with the highest gross national income per capita by purchasing power parity in 2002, had a population over 3 million, and had available data on income inequality and outcome measures. Percentage of obese (body mass index >30) adult men and women, diabetes mortality rates, and calorie consumption per capita per day. Adjusting for gross national per capita income, income inequality was positively correlated with the percentage of obese men (r = 0.48, p = 0.03), the percentage of obese women (r = 0.62, p = 0.003), diabetes mortality rates per 1 million people (r = 0.46, p = 0.04), and average calories per capita per day (r = 0.50, p = 0.02). Correlations were stronger if analyses were weighted for population size. The effect of income inequality on female obesity was independent of average calorie intake. Obesity, diabetes mortality, and calorie consumption were associated with income inequality in developed countries. Increased nutritional problems may be a consequence of the psychosocial impact of living in a more hierarchical society.

Evaluating the democratic accountability of governance networks: Analysing two Nordic Megaprojects

DEFF Research Database (Denmark)

Aarsæther, Nils; Bjørnå, Hilde; Fotel, Trine

2009-01-01

There is currently a need to analyse and measure the democratic accountability of governance networks. This kind of analysis and measurement calls for the development of an interactive conceptualisation of democratic accountability that makes it possible to measure the level of democratic...... accountability of concrete governance networks with reference to the extent to which they interact with (1) relevant politicians appointed through the institutions of representative democracy, (2) the relevant and affected stakeholders, and (3) the wider citizenry. A case study of two governance networks...... involved in two Nordic megaprojects illustrates how this measurement device can be brought into use and what the insights are that can be gained from it....

Power Play and Performance in Harajuku

OpenAIRE

Amelia Groom

2011-01-01

This article analyses the structures and implications of Japan’s contemporary street fashion cultures, primarily those of Harajuku. Using Roland Barthes’ analogy of dress and dressing it situates the radical subcultural styles within traditional Japanese aesthetics and in a wider history of fashion. Examining various motifs from kawaisa to uniforms, cross-dressing, masks and the politics of second-hand fashion, it deals with theories of authenticity, appearance and agency.

Association Between a Wider Availability of Health Information and Health Care Utilization in Vietnam: Cross-Sectional Study.

Science.gov (United States)

Nguyen, Hoang Thuy Linh; Nakamura, Keiko; Seino, Kaoruko; Vo, Van Thang

2017-12-18

The rapid and widespread development of mass media sources including the Internet is occurring worldwide. Users are being confronted with a flood of health information through a wide availability of sources. Studies on how the availability of health information has triggered users' interest in utilizing health care services remain limited within the Vietnamese population. This study examined the associations between the wider availability of sources for health information and health care utilization in Vietnam after adjusting for potential confounding variables. The data for this study were drawn from a cross-sectional study conducted over a 6-month period in Hue, a city in central Vietnam. The participants were 993 randomly selected adults aged between 18 and 60 years. Information was collected through face-to-face interviews on the types of information sources that were consulted, including traditional media (television), Internet, and health education courses, as well as the impact of such information on health care use (emergency department visits, hospitalizations, doctor visits). Multivariable logistic regression analyses were performed at a 95% confidence level. The prevalence of watching television, using the Internet, and attending health education courses to obtain health information were 50.9% (505/993), 32.9% (327/993), and 8.7% (86/993), respectively. After further adjustments for self-reported health status, the presence of health insurance, and monthly income, respondents who watched television and used the Internet to obtain health information were 1.7 times more likely to visit a doctor (television: adjusted odds ratio [AOR] 1.69, 95% CI 1.30-2.19; Internet: AOR 1.64, 95% CI 1.23-2.19), and also significantly associated with inpatient hospitalization (P=.003). The use of widely available mass media sources (eg, television and the Internet) to obtain health information was associated with higher health care utilization. How this interest in health

Scenario sensitivity analyses performed on the PRESTO-EPA LLW risk assessment models

International Nuclear Information System (INIS)

Bandrowski, M.S.

1988-01-01

The US Environmental Protection Agency (EPA) is currently developing standards for the land disposal of low-level radioactive waste. As part of the standard development, EPA has performed risk assessments using the PRESTO-EPA codes. A program of sensitivity analysis was conducted on the PRESTO-EPA codes, consisting of single parameter sensitivity analysis and scenario sensitivity analysis. The results of the single parameter sensitivity analysis were discussed at the 1987 DOE LLW Management Conference. Specific scenario sensitivity analyses have been completed and evaluated. Scenario assumptions that were analyzed include: site location, disposal method, form of waste, waste volume, analysis time horizon, critical radionuclides, use of buffer zones, and global health effects

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation

International Nuclear Information System (INIS)

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This manual covers an array of modules written for the SCALE package, consisting of drivers, system libraries, cross section and materials properties libraries, input/output routines, storage modules, and help files

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This manual covers an array of modules written for the SCALE package, consisting of drivers, system libraries, cross section and materials properties libraries, input/output routines, storage modules, and help files.

Geodetic, Geologic and Seismic Interdisciplinary Research of Tectonically Caused Movements in the Wider Area of the City of Zagreb

Science.gov (United States)

Dapo, A.; Pribicevic, B.; Herak, M.; Prelogovic, E.

2012-04-01

Since the last great earthquake in 1880 which shook the Zagreb area with IX° MCS, tectonic movements and models of numerous Zagreb faults have been the focal point of Croatian geologists, seismologists and in the last 15 years also geodetic scientists, who all have been working in the scope of their scientific branches on bringing the light to the tectonic mechanisms in the wider Zagreb area. Since it is tectonically very active area and being the Capitol city of the Croatia with very high population density it is of utmost importance to understand those mechanisms and to according to them find the best possible measures for protecting people and valuables. Best results are certainly going to be achieved through the interdisciplinary approach. That is why this paper presents first interdisciplinary results from geodetic, geologic and seismic researches and their contribution to the collective knowledge about tectonic movements in the wider area of the City of Zagreb.

Power Play and Performance in Harajuku

Directory of Open Access Journals (Sweden)

Amelia Groom

2011-01-01

Full Text Available This article analyses the structures and implications of Japan’s contemporary street fashion cultures, primarily those of Harajuku. Using Roland Barthes’ analogy of dress and dressing it situates the radical subcultural styles within traditional Japanese aesthetics and in a wider history of fashion. Examining various motifs from kawaisa to uniforms, cross-dressing, masks and the politics of second-hand fashion, it deals with theories of authenticity, appearance and agency.

Swiss Life Sciences - a science communication project for both schools and the wider public led by the foundation Science et Cité.

Science.gov (United States)

Röthlisberger, Michael

2012-01-01

The foundation Science et Cité was founded 1998 with the aim to inform the wider Swiss public about current scientific topics and to generate a dialogue between science and society. Initiated as an independent foundation by the former State Secretary for Science and Research, Dr. Charles Kleiber, Science et Cité is now attached to the Swiss Academies of Arts and Sciences as a competence center for dialogue with the public. Due to its branches in all language regions of the country, the foundation is ideally suited to initiate and implement communication projects on a nationwide scale. These projects are subdivided into three categories: i) science communication for children/adolescents, ii) establishing a dialogue between science and the wider public, and iii) conducting the role of a national center of competence and networking in science communication. Swiss Life Sciences is a project that fits into all of these categories: a year-round program for schools is complemented with an annual event for the wider public. With the involvement of most of the major Swiss universities, the Swiss National Science Foundation, the foundation Gen Suisse and many other partners, Swiss Life Sciences also sets an example of national networking within the science communication community.

HYDROGEOLOGICAL AND HYDROGEOCHEMICAL CHARACTERISTICS OF A WIDER AREA OF THE REGIONAL WELL FIELD EASTERN SLAVONIA – SIKIREVCI

Directory of Open Access Journals (Sweden)

Jasna Kopić

2016-10-01

Full Text Available This paper establishes hydrogeological and hydrogeochemical characteristics of a wider area of the regional well field Eastern Slavonia - Sikirevci. The research was conducted based on data gathered from the area of the Federation of Bosnia and Herzegovina and the Republic of Croatia. The aquifer Velika Kopanica is situated at the territory of the Republic of Croatia in the triangular region formed between Kopanica, Gundinci and Kruševica. The River Sava partially flows through it and the aquifer extends beneath the river to the territory of the Federation of Bosnia and Herzegovina from Donji Svilaj in the West to Domaljevac in the East where its yield is the highest. The thickness of the aquifer decreases towards the water body Odžak. It was determined that the groundwater which is extracted from wells of the wider area of the regional well field contains iron, manganese, natural ammonia and arsenic in values exceeding the maximum allowable concentration for drinking water. The increased values of these parameters are a result of mineral composition and reductive conditions in the aquifer environment. By means of a multivariate statistic cluster analysis, an overview of groups of elements is provided based on geochemical affinity and/or origin.

Performance of informative priors skeptical of large treatment effects in clinical trials: A simulation study.

Science.gov (United States)

Pedroza, Claudia; Han, Weilu; Thanh Truong, Van Thi; Green, Charles; Tyson, Jon E

2018-01-01

One of the main advantages of Bayesian analyses of clinical trials is their ability to formally incorporate skepticism about large treatment effects through the use of informative priors. We conducted a simulation study to assess the performance of informative normal, Student- t, and beta distributions in estimating relative risk (RR) or odds ratio (OR) for binary outcomes. Simulation scenarios varied the prior standard deviation (SD; level of skepticism of large treatment effects), outcome rate in the control group, true treatment effect, and sample size. We compared the priors with regards to bias, mean squared error (MSE), and coverage of 95% credible intervals. Simulation results show that the prior SD influenced the posterior to a greater degree than the particular distributional form of the prior. For RR, priors with a 95% interval of 0.50-2.0 performed well in terms of bias, MSE, and coverage under most scenarios. For OR, priors with a wider 95% interval of 0.23-4.35 had good performance. We recommend the use of informative priors that exclude implausibly large treatment effects in analyses of clinical trials, particularly for major outcomes such as mortality.

HBIM and augmented information: towards a wider user community of image and range-based reconstructions

Science.gov (United States)

Barazzetti, L.; Banfi, F.; Brumana, R.; Oreni, D.; Previtali, M.; Roncoroni, F.

2015-08-01

This paper describes a procedure for the generation of a detailed HBIM which is then turned into a model for mobile apps based on augmented and virtual reality. Starting from laser point clouds, photogrammetric data and additional information, a geometric reconstruction with a high level of detail can be carried out by considering the basic requirements of BIM projects (parametric modelling, object relations, attributes). The work aims at demonstrating that a complex HBIM can be managed in portable devices to extract useful information not only for expert operators, but also towards a wider user community interested in cultural tourism.

HBIM and augmented information: towards a wider user community of image and range-based reconstructions

Directory of Open Access Journals (Sweden)

L. Barazzetti

2015-08-01

Full Text Available This paper describes a procedure for the generation of a detailed HBIM which is then turned into a model for mobile apps based on augmented and virtual reality. Starting from laser point clouds, photogrammetric data and additional information, a geometric reconstruction with a high level of detail can be carried out by considering the basic requirements of BIM projects (parametric modelling, object relations, attributes. The work aims at demonstrating that a complex HBIM can be managed in portable devices to extract useful information not only for expert operators, but also towards a wider user community interested in cultural tourism.

Analytical performance, agreement and user-friendliness of six point-of-care testing urine analysers for urinary tract infection in general practice

NARCIS (Netherlands)

Schot, Marjolein J C; van Delft, Sanne; Kooijman-Buiting, Antoinette M J; de Wit, Niek J; Hopstaken, Rogier M

2015-01-01

OBJECTIVE: Various point-of-care testing (POCT) urine analysers are commercially available for routine urine analysis in general practice. The present study compares analytical performance, agreement and user-friendliness of six different POCT urine analysers for diagnosing urinary tract infection

Orbitrap mass analyser for in situ characterisation of planetary environments: Performance evaluation of a laboratory prototype

Science.gov (United States)

Briois, Christelle; Thissen, Roland; Thirkell, Laurent; Aradj, Kenzi; Bouabdellah, Abdel; Boukrara, Amirouche; Carrasco, Nathalie; Chalumeau, Gilles; Chapelon, Olivier; Colin, Fabrice; Coll, Patrice; Cottin, Hervé; Engrand, Cécile; Grand, Noel; Lebreton, Jean-Pierre; Orthous-Daunay, François-Régis; Pennanech, Cyril; Szopa, Cyril; Vuitton, Véronique; Zapf, Pascal; Makarov, Alexander

2016-10-01

For decades of space exploration, mass spectrometry has proven to be a reliable instrumentation for the characterisation of the nature and energy of ionic and neutral, atomic and molecular species in the interplanetary medium and upper planetary atmospheres. It has been used as well to analyse the chemical composition of planetary and small bodies environments. The chemical complexity of these environments calls for the need to develop a new generation of mass spectrometers with significantly increased mass resolving power. The recently developed OrbitrapTM mass analyser at ultra-high resolution shows promising adaptability to space instrumentation, offering improved performances for in situ measurements. In this article, we report on our project named ;Cosmorbitrap; aiming at demonstrating the adaptability of the Orbitrap technology for in situ space exploration. We present the prototype that was developed in the laboratory for demonstration of both technical feasibility and analytical capabilities. A set of samples containing elements with masses ranging from 9 to 208 u has been used to evaluate the performance of the analyser, in terms of mass resolving power (reaching 474,000 at m/z 9) and ability to discriminate between isobaric interferences, accuracy of mass measurement (below 15 ppm) and determination of relative isotopic abundances (below 5%) of various samples. We observe a good agreement between the results obtained with the prototype and those of a commercial instrument. As the background pressure is a key parameter for in situ exploration of atmosphere planetary bodies, we study the effect of background gas on the performance of the Cosmorbitrap prototype, showing an upper limit for N2 in our set-up at 10-8 mbar. The results demonstrate the strong potential to adapt this technology to space exploration.

Supplemental Performance Analyses for the Potential High-Level Nuclear Waste Repository at Yucca Mountain

International Nuclear Information System (INIS)

Sevougian, S. D.; McNeish, J. A.; Coppersmith, K.; Jenni, K. E.; Rickertsen, L. D.; Swift, P. N.; Wilson, M. L.

2002-01-01

The U.S. Department of Energy (DOE) is considering the possible recommendation of a site at Yucca Mountain, Nevada, for the potential development of a geologic repository for the disposal of high-level radioactive waste and spent nuclear fuel. To facilitate public review and comment, in May 2001 the DOE released the Yucca Mountain Science and Engineering Report (S and ER) (1), which presents technical information supporting the consideration of the possible site recommendation. The report summarizes the results of more than 20 years of scientific and engineering studies. Based on internal reviews of the S and ER and its key supporting references, the Total System Performance Assessment for the Site Recommendation (TSPA-SR) (2) and the Analysis Model Reports and Process Model Reports cited therein, the DOE has recently identified and performed several types of analyses to supplement the treatment of uncertainty in support of the consideration of a possible site recommendation. The results of these new analyses are summarized in the two-volume report entitled FY01 Supplemental Science and Performance Analysis (SSPA) (3,4). The information in this report is intended to supplement, not supplant, the information contained in the S and ER. The DOE recognizes that important uncertainties will always remain in any assessment of the performance of a potential repository over thousands of years (1). One part of the DOE approach to recognizing and managing these uncertainties is a commitment to continued testing and analysis and to the continued evaluation of the technical basis supporting the possible recommendation of the site, such as the analysis contained in the SSPA. The goals of the work described here are to provide insights into the implications of newly quantified uncertainties, updated science, and evaluations of lower operating temperatures on the performance of a potential Yucca Mountain repository and to increase confidence in the results of the TSPA described

IRE (Institut National des Radioelements) site in Belgium. Report of in situ measurements and analyses performed for the RTBF; Site IRE (Institut National des Radioelements) en Belgique. Compte rendu des mesures in situ et analyses effectuees pour la RTBF

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-05-15

This document reports various analyses performed within the frame of the preparation and filming of a TV documentary on the Belgium National Institute of Radio-elements. It reports gamma radiation measurements performed at the vicinity of the institute, discusses the possible origin of its increase at the vicinity of the institute, analyses of sludge samples coming from a wastewater treatment works, and analyses of milk, cabbage, mosses and sediments collected by residents

Socio-technical and organizational challenges to wider e-Health implementation.

Science.gov (United States)

Vitacca, M; Mazzù, M; Scalvini, S

2009-01-01

Recent advances in information communication technology allow contact with patients at home through e-Health services (telemedicine, in particular). We provide insights on the state of the art of e-Health and telemedicine for possible wider future clinical use. Telemedicine opportunities are summarized as i) home telenursing, ii) electronic transfer to specialists and hospitals, iii) teleconsulting between general practitioners and specialists and iv) call centres activities and online health. At present, a priority action of the EU is the Initiative on TM for chronic disease management as home health monitoring and the future Vision for Europe 2020 is based on development of Integrated Telemedicine Services. There are pros and cons in e-Health and telemedicine. Benefits can be classified as benefits for i) citizens, patients and caregivers and ii) health care provider organizations. Institutions and individuals that play key roles in the future of e-Health are doctors, patients and hospitals, while the whole system should be improved at three crucial levels: 1) organizational, 2) regulatory and 3) technological. Quality, access and efficiency are the general key issues for the success of e-Health and telemedicine implementation. The real technology is the human resource available into the organizations. For e-Health and telemedicine to grow, it will be necessary to investigate their long-term efficacy, cost effectiveness, possible improvement in quality of life and impact on public health burden.

Methods and Techniques Used to Convey Total System Performance Assessment Analyses and Results for Site Recommendation at Yucca Mountain, Nevada, USA

International Nuclear Information System (INIS)

Mattie, Patrick D.; McNeish, Jerry A.; Sevougian, S. David; Andrews, Robert W.

2001-01-01

Total System Performance Assessment (TSPA) is used as a key decision-making tool for the potential geologic repository of high level radioactive waste at Yucca Mountain, Nevada USA. Because of the complexity and uncertainty involved in a post-closure performance assessment, an important goal is to produce a transparent document describing the assumptions, the intermediate steps, the results, and the conclusions of the analyses. An important objective for a TSPA analysis is to illustrate confidence in performance projections of the potential repository given a complex system of interconnected process models, data, and abstractions. The methods and techniques used for the recent TSPA analyses demonstrate an effective process to portray complex models and results with transparency and credibility

Variety in Performance: A comparative Analysis of Recorded Performances of Bach's Sixth Suite for Solo Cello from 1961 to 1998

Directory of Open Access Journals (Sweden)

Alistair Sung

2011-08-01

Full Text Available There exists a commonly held belief amongst musicologists that there has been a ―general globalisation of styles‖ within recorded performances of the latter half of the twentieth century. For many, this is evidenced by an increased interaction between mainstream (MS and historically informed performance (HIP practices as well as a general decrease in the diversity of performances. Through a comparative aural and software-assisted analysis and measurement of performance features such as tempo, rhythmic flexibility, vibrato, portamento, bowing, and articulation in key interpretations of Bach‘s Suite No. 6 for Solo Cello recorded in between 1961 and 1998, this study investigates the relationship between MS and HIP performances in the latter half of the 20th century. By limiting analyses to those performers who have made two recordings during the designated period (Tortelier, Starker, Bylsma, Ma, Wispelwey, it has been possible to identify overarching trends and individual differences. These have been examined with reference to their broader social and cultural context in order to test commonly held musicological assumptions about the modernist and postmodernist foundations of performances from this era. The results indicate that by the 1990s increased interaction between MS and HIP practices has resulted in a wider variety of differing performances and that this can be seen to be symptomatic of the postmodern condition that has become prevalent since the last decade of the 20th century.

MutSpec: a Galaxy toolbox for streamlined analyses of somatic mutation spectra in human and mouse cancer genomes.

Science.gov (United States)

Ardin, Maude; Cahais, Vincent; Castells, Xavier; Bouaoun, Liacine; Byrnes, Graham; Herceg, Zdenko; Zavadil, Jiri; Olivier, Magali

2016-04-18

The nature of somatic mutations observed in human tumors at single gene or genome-wide levels can reveal information on past carcinogenic exposures and mutational processes contributing to tumor development. While large amounts of sequencing data are being generated, the associated analysis and interpretation of mutation patterns that may reveal clues about the natural history of cancer present complex and challenging tasks that require advanced bioinformatics skills. To make such analyses accessible to a wider community of researchers with no programming expertise, we have developed within the web-based user-friendly platform Galaxy a first-of-its-kind package called MutSpec. MutSpec includes a set of tools that perform variant annotation and use advanced statistics for the identification of mutation signatures present in cancer genomes and for comparing the obtained signatures with those published in the COSMIC database and other sources. MutSpec offers an accessible framework for building reproducible analysis pipelines, integrating existing methods and scripts developed in-house with publicly available R packages. MutSpec may be used to analyse data from whole-exome, whole-genome or targeted sequencing experiments performed on human or mouse genomes. Results are provided in various formats including rich graphical outputs. An example is presented to illustrate the package functionalities, the straightforward workflow analysis and the richness of the statistics and publication-grade graphics produced by the tool. MutSpec offers an easy-to-use graphical interface embedded in the popular Galaxy platform that can be used by researchers with limited programming or bioinformatics expertise to analyse mutation signatures present in cancer genomes. MutSpec can thus effectively assist in the discovery of complex mutational processes resulting from exogenous and endogenous carcinogenic insults.

Compilation of Quality Assurance Documentation for Analyses Performed for the Resumption of Transient Testing Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

Schafer, Annette L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sondrup, A. Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2013-11-01

This is a companion document to the analyses performed in support of the environmental assessment for the Resumption of Transient Fuels and Materials Testing. It is provided to allow transparency of the supporting calculations. It provides computer code input and output. The basis for the calculations is documented separately in INL (2013) and is referenced, as appropriate. Spreadsheets used to manipulate the code output are not provided.

Ambos lados: deconstructing identity, performing memory

OpenAIRE

Marín Ezpeleta, Rakel; Daniel, Henry

2015-01-01

Project Barca’s central research question – how can embodied personal and collective memories be shaped into new architectures of identityand belonging in the form of innovative performance works that speak to wider sections of society? – has so far generated a number of mixed-media performance outcomes in its two research locations; Barcelona, Catalonia, and Vancouver, Canada. Some major works are the video essay Encounters 3; Barca-El otro lado – a performance work that utilizes dancers, ac...

Proteins analysed as virtual knots

Science.gov (United States)

Alexander, Keith; Taylor, Alexander J.; Dennis, Mark R.

2017-02-01

Long, flexible physical filaments are naturally tangled and knotted, from macroscopic string down to long-chain molecules. The existence of knotting in a filament naturally affects its configuration and properties, and may be very stable or disappear rapidly under manipulation and interaction. Knotting has been previously identified in protein backbone chains, for which these mechanical constraints are of fundamental importance to their molecular functionality, despite their being open curves in which the knots are not mathematically well defined; knotting can only be identified by closing the termini of the chain somehow. We introduce a new method for resolving knotting in open curves using virtual knots, which are a wider class of topological objects that do not require a classical closure and so naturally capture the topological ambiguity inherent in open curves. We describe the results of analysing proteins in the Protein Data Bank by this new scheme, recovering and extending previous knotting results, and identifying topological interest in some new cases. The statistics of virtual knots in protein chains are compared with those of open random walks and Hamiltonian subchains on cubic lattices, identifying a regime of open curves in which the virtual knotting description is likely to be important.

Mediation Analyses in the Real World

DEFF Research Database (Denmark)

Lange, Theis; Starkopf, Liis

2016-01-01

The paper by Nguyen et al.1 published in this issue of Epidemiology presents a comparison of the recently suggested inverse odds ratio approach for addressing mediation and a more conventional Baron and Kenny-inspired method. Interestingly, the comparison is not done through a discussion of restr......The paper by Nguyen et al.1 published in this issue of Epidemiology presents a comparison of the recently suggested inverse odds ratio approach for addressing mediation and a more conventional Baron and Kenny-inspired method. Interestingly, the comparison is not done through a discussion...... it simultaneously ensures that the comparison is based on properties, which matter in actual applications, and makes the comparison accessible for a broader audience. In a wider context, the choice to stay close to real-life problems mirrors a general trend within the literature on mediation analysis namely to put...... applications using the inverse odds ration approach, as it simply has not had enough time to move from theoretical concept to published applied paper, we do expect to be able to judge the willingness of authors and journals to employ the causal inference-based approach to mediation analyses. Our hope...

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 5, Uncertainty and sensitivity analyses of gas and brine migration for undisturbed performance

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume of the 1992 PA contains results of uncertainty and sensitivity analyses with respect to migration of gas and brine from the undisturbed repository. Additional information about the 1992 PA is provided in other volumes. Volume 1 contains an overview of WIPP PA and results of a preliminary comparison with 40 CFR 191, Subpart B. Volume 2 describes the technical basis for the performance assessment, including descriptions of the linked computational models used in the Monte Carlo analyses. Volume 3 contains the reference data base and values for input parameters used in consequence and probability modeling. Volume 4 contains uncertainty and sensitivity analyses with respect to the EPA`s Environmental Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Finally, guidance derived from the entire 1992 PA is presented in Volume 6. Results of the 1992 uncertainty and sensitivity analyses indicate that, conditional on the modeling assumptions and the assigned parameter-value distributions, the most important parameters for which uncertainty has the potential to affect gas and brine migration from the undisturbed repository are: initial liquid saturation in the waste, anhydrite permeability, biodegradation-reaction stoichiometry, gas-generation rates for both corrosion and biodegradation under inundated conditions, and the permeability of the long-term shaft seal.

Power performance assessment. Final report

International Nuclear Information System (INIS)

Frandsen, S.

1998-12-01

In the increasingly commercialised wind power marketplace, the lack of precise assessment methods for the output of an investment is becoming a barrier for wider penetration of wind power. Thus, addressing this problem, the overall objectives of the project are to reduce the financial risk in investment in wind power projects by significantly improving the power performance assessment methods. Ultimately, if this objective is successfully met, the project may also result in improved tuning of the individual wind turbines and in optimisation methods for wind farm operation. The immediate, measurable objectives of the project are: To prepare a review of existing contractual aspects of power performance verification procedures of wind farms; to provide information on production sensitivity to specific terrain characteristics and wind turbine parameters by analyses of a larger number of wind farm power performance data available to the proposers; to improve the understanding of the physical parameters connected to power performance in complex environment by comparing real-life wind farm power performance data with 3D computational flow models and 3D-turbulence wind turbine models; to develop the statistical framework including uncertainty analysis for power performance assessment in complex environments; and to propose one or more procedures for power performance evaluation of wind power plants in complex environments to be applied in contractual agreements between purchasers and manufacturers on production warranties. Although the focus in this project is on power performance assessment the possible results will also be of benefit to energy yield forecasting, since the two tasks are strongly related. (au) JOULE III. 66 refs.; In Co-operation Renewable Energy System Ltd. (GB); Centre for Renewable Energy (GR); Aeronautic Research Centre (SE); National Engineering Lab. (GB); Public Power Cooperation (GR)

Comprehensive performance analyses and optimization of the irreversible thermodynamic cycle engines (TCE) under maximum power (MP) and maximum power density (MPD) conditions

International Nuclear Information System (INIS)

Gonca, Guven; Sahin, Bahri; Ust, Yasin; Parlak, Adnan

2015-01-01

This paper presents comprehensive performance analyses and comparisons for air-standard irreversible thermodynamic cycle engines (TCE) based on the power output, power density, thermal efficiency, maximum dimensionless power output (MP), maximum dimensionless power density (MPD) and maximum thermal efficiency (MEF) criteria. Internal irreversibility of the cycles occurred during the irreversible-adiabatic processes is considered by using isentropic efficiencies of compression and expansion processes. The performances of the cycles are obtained by using engine design parameters such as isentropic temperature ratio of the compression process, pressure ratio, stroke ratio, cut-off ratio, Miller cycle ratio, exhaust temperature ratio, cycle temperature ratio and cycle pressure ratio. The effects of engine design parameters on the maximum and optimal performances are investigated. - Highlights: • Performance analyses are conducted for irreversible thermodynamic cycle engines. • Comprehensive computations are performed. • Maximum and optimum performances of the engines are shown. • The effects of design parameters on performance and power density are examined. • The results obtained may be guidelines to the engine designers

Cost-of-illness studies and cost-effectiveness analyses in anxiety disorders: a systematic review.

Science.gov (United States)

Konnopka, Alexander; Leichsenring, Falk; Leibing, Eric; König, Hans-Helmut

2009-04-01

To review cost-of-illness studies (COI) and cost-effectiveness analyses (CEA) conducted for anxiety disorders. Based on a database search in Pubmed, PsychINFO and NHS EED, studies were classified according to various criteria. Cost data were inflated and converted to 2005 US-$ purchasing power parities (PPP). We finally identified 20 COI and 11 CEA of which most concentrated on panic disorder (PD) and generalized anxiety disorder (GAD). Differing inclusion of cost categories limited comparability of COI. PD and GAD tended to show higher direct costs per case, but lower direct cost per inhabitant than social and specific phobias. Different measures of effectiveness severely limited comparability of CEA. Overall CEA analysed 26 therapeutic or interventional strategies mostly compared to standard treatment, 8 of them resulting in lower better effectiveness and costs than the comparator. Anxiety disorders cause considerable costs. More research on phobias, more standardised inclusion of cost categories in COI and a wider use of comparable effectiveness measures (like QALYs) in CEA is needed.

Performance Determinants in Physical Sciences for ODL ...

African Journals Online (AJOL)

Identifying performance determinants in physical science subjects for students studying through open and distance learning modes in higher learning institutions requires wider range of intuition than it is for conventional institutions. Using data from The Open University of Tanzania, this paper has unearthed some of the ...

Study on the atmospheric component with the scope of analyses on the environmental impact; Studio della componente atmosfera ai fini delle valutazioni di impatto ambientale

Energy Technology Data Exchange (ETDEWEB)

Ferrara, V [ENEA - Dipartimento Protezione Ambientale e Salute dell' Uomo, Centro Ricerche Energia, Casaccia (Italy); La Camera, F [Ministerio dell' Ambiente - Servizio Valutazione Impatto Ambientale Infromazione ai Cittadine e per la Relazione sullo Stato dell' Ambiente (Italy)

1989-03-15

This work has been carried out following a specific request from Italian National Department for Environment and shows technical approaches and methodologies of analyses and forecasts set up for environmental impact studies referred to 'atmospheric environment'. This work is presented according to the general items and objectives fixed by the same Department in the wider operative system for the application in Italy of environmental impact procedures. (author)

Sample preparation in foodomic analyses.

Science.gov (United States)

Martinović, Tamara; Šrajer Gajdošik, Martina; Josić, Djuro

2018-04-16

Representative sampling and adequate sample preparation are key factors for successful performance of further steps in foodomic analyses, as well as for correct data interpretation. Incorrect sampling and improper sample preparation can be sources of severe bias in foodomic analyses. It is well known that both wrong sampling and sample treatment cannot be corrected anymore. These, in the past frequently neglected facts, are now taken into consideration, and the progress in sampling and sample preparation in foodomics is reviewed here. We report the use of highly sophisticated instruments for both high-performance and high-throughput analyses, as well as miniaturization and the use of laboratory robotics in metabolomics, proteomics, peptidomics and genomics. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

The influence of uncertainties of measurements in laboratory performance evaluation by intercomparison program in radionuclide analyses of environmental samples

International Nuclear Information System (INIS)

Tauhata, L.; Vianna, M.E.; Oliveira, A.E. de; Clain, A.F.; Ferreira, A.C.M.; Bernardes, E.M.

2000-01-01

The accuracy and precision of results of the radionuclide analyses in environmental samples are widely claimed internationally due to its consequences in the decision process coupled to evaluation of environmental pollution, impact, internal and external population exposure. These characteristics of measurement of the laboratories can be shown clearly using intercomparison data, due to the existence of a reference value and the need of three determinations for each analysis. In intercomparison studies accuracy in radionuclide assays in low-level environmental samples has usually been the main focus in performance evaluation and it can be estimated by taking into account the deviation between the experimental laboratory mean value and the reference value. The laboratory repeatability of measurements or their standard deviation is seldom included in performance evaluation. In order to show the influence of the uncertainties in performance evaluation of the laboratories, data of 22 intercomparison runs which distributed 790 spiked environmental samples to 20 Brazilian participant laboratories were compared, using the 'Normalised Standard Deviation' as statistical criteria for performance evaluation of U.S.EPA. It mainly takes into account the laboratory accuracy and the performance evaluation using the same data classified by normalised standard deviation modified by a weight reactor that includes the individual laboratory uncertainty. The results show a relative decrease in laboratory performance in each radionuclide assay: 1.8% for 65 Zn, 2.8% for 40 K, 3.4 for 60 Co, 3.7% for 134 Cs, 4.0% for 137 Cs, 4.4% for Th and U nat , 4.5% for 3 H, 6.3% for 133 Ba, 8.6% for 90 Sr, 10.6% for Gross Alpha, 10.9% for 106 Ru, 11.1% for 226 Ra, 11.5% for Gross Beta and 13.6% for 228 Ra. The changes in the parameters of the statistical distribution function were negligible and the distribution remained as Gaussian type for all radionuclides analysed. Data analyses in terms of

Reader characteristics linked to detection of pulmonary nodules on radiographs: ROC vs. JAFROC analyses of performance

Science.gov (United States)

Kohli, Akshay; Robinson, John W.; Ryan, John; McEntee, Mark F.; Brennan, Patrick C.

2011-03-01

The purpose of this study is to explore whether reader characteristics are linked to heightened levels of diagnostic performance in chest radiology using receiver operating characteristic (ROC) and jackknife free response ROC (JAFROC) methodologies. A set of 40 postero-anterior chest radiographs was developed, of which 20 were abnormal containing one or more simulated nodules, of varying subtlety. Images were independently reviewed by 12 boardcertified radiologists including six chest specialists. The observer performance was measured in terms of ROC and JAFROC scores. For the ROC analysis, readers were asked to rate their degree of suspicion for the presence of nodules by using a confidence rating scale (1-6). JAFROC analysis required the readers to locate and rate as many suspicious areas as they wished using the same scale and resultant data were used to generate Az and FOM scores for ROC and JAFROC analyses respectively. Using Pearson methods, scores of performance were correlated with 7 reader characteristics recorded using a questionnaire. JAFROC analysis showed that improved reader performance was significantly (pchest specialty (pchest radiographs (pchest readings per year (pchest radiographs (pchest specialty, hours reading per week and number of radiographs read per year. Also, JAFROC is a more powerful predictor of performance as compared to ROC.

Extending IPY Data to a Wider Audience

Science.gov (United States)

Turrin, M.; Bell, R. E.; Pfirman, S. L.

2010-12-01

Perhaps the most significant IPY contribution to science education was the vast amount of data collected at the polar-regions on Earth systems and processes that was made immediately available to teachers and curriculum developers. Supplementing textbooks with the Internet as an education partner, allowed participating teachers to transform science education through: their use of current data as an integral component of their classroom teaching; their training of students to seek out data as evidence of Earth processes; and their instruction to students on how to validate sources and uses of data. Yet, for every teacher and student who has been part of this successful IPY outreach there are many more who have not been reached, don’t know how to include polar science into their coursework, or don’t comfortably work with data. Our experience with data education projects suggests that to reach the next round of students, teachers, educators and the wider adult population we need to translate this data so it is accessible through carefully constructed activities, simulations, and games. In addition we need to actively seek new partnership and outlet opportunities. The collected measurements tell us that our poles are warming on a human timescale. Using data to tell the story, the unambiguous signal of warming makes it accessible to a much broader audience. Our experience has shown that, for a novice population working with data, the educational effectiveness is significantly enhanced when the signal in the data is strong and the Earth processes are clear. Building upon IPY data and resources, focusing on the Earth’s changing climate, and working with partnerships developed over the last two years, Lamont has put together several new education and outreach collaborations. Our goal is to reach new audiences through: 1) Inventorying, Assessing and Planning - Through an NSF planning grant we are leveraging IPY connections and findings in a Polar Climate Education

Concept and performance study of turbocharged solid propellant ramjet

Science.gov (United States)

Li, Jiang; Liu, Kai; Liu, Yang; Liu, Shichang

2018-06-01

This study proposes a turbocharged solid propellant ramjet (TSPR) propulsion system that integrates a turbocharged system consisting of a solid propellant (SP) air turbo rocket (ATR) and the fuel-rich gas generator of a solid propellant ramjet (SPR). First, a suitable propellant scheme was determined for the TSPR. A solid hydrocarbon propellant is used to generate gas for driving the turbine, and a boron-based fuel-rich propellant is used to provide fuel-rich gas to the afterburner. An appropriate TSPR structure was also determined. The TSPR's thermodynamic cycle was analysed to prove its theoretical feasibility. The results showed that the TSPR's specific cycle power was larger than those of SP-ATR and SPR and thermal efficiency was slightly less than that of SP-ATR. Overall, TSPR showed optimal performance in a wide flight envelope. The specific impulses and specific thrusts of TSPR, SP-ATR, and SPR in the flight envelope were calculated and compared. TSPR's flight envelope roughly overlapped that of SP-ATR, its specific impulse was larger than that of SP-ATR, and its specific thrust was larger than those of SP-ATR and SPR. Attempts to improve the TSPR off-design performance prompted our proposal of a control plan for off-design codes in which both the turbocharger corrected speed and combustor excess gas coefficient are kept constant. An off-design performance model was established by analysing the TSPR working process. We concluded that TSPR with a constant corrected speed had wider flight envelope, higher thrust, and higher specific impulse than TSPR with a constant physical speed determined by calculating the performance of off-design TSPR codes under different control plans. The results of this study can provide a reference for further studies on TSPRs.

Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

International Nuclear Information System (INIS)

Diersch, R.; Weiss, M.; Tso, C.F.; Chung, S.H.; Lee, H.Y.

2004-01-01

CASTORc ircledR KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them

Analyses to demonstrate the structural performance of the CASTOR KN12 in hypothetical accident drop accident scenarios

Energy Technology Data Exchange (ETDEWEB)

Diersch, R.; Weiss, M. [Gesellschaft fuer Nuklear-Behaelter mbH (Germany); Tso, C.F. [Arup (United Kingdom); Chung, S.H.; Lee, H.Y. [KHNP-NETEC (Korea)

2004-07-01

CASTORc{sup ircledR} KN-12 is a new cask design by GNB for KHNP-NETEC for dry and wet transportation of up to twelve spent PWR fuel assemblies in Korea. It received its transport license from the Korean Competent Authority KINS in July 2002 and is now in use in South Korea. It has been designed to satisfy the regulatory requirements of the 10 CFR 71 and the IAEA ST-1 for Type B(U)F packages. Its structural performance was demonstrated against the load cases and boundary conditions as defined in 10 CFR 71 and NRC's Regulatory Guide 7.8, and further explained in NUREG 1617. This included normal conditions of transport load cases - including Hot Environment, Cold Environment, Increased External Pressure (140MPa), Minimum External Pressure (24.5kPa), Vibration and shock, and 0.3m free drop - and the hypothetical accident conditions load cases - including the 9m Free Drop, Puncture, Thermal Fire Accident, 200m Water Immersion and 1.5 x MNOP Internal Pressure. Structural performance were demonstrated by analysis, including state-of-the-art finite element (FE) simulation, and confirmed by tests using a 1/3-scale model. Test results were also used to verify the numerical tool and the methods used in the analyses. All the structural analyses including validation against drop tests were carried out by Arup, and testing were carried out by KAERI. This paper concentrates on the analysis carried out to demonstrate performance in the hypothetical accident 9m free drop scenarios, and results from a small selection of them.

Investigating Musical Performance: Commonality and Diversity among Classical and Non-Classical Musicians

Science.gov (United States)

Creech, Andrea; Papageorgi, Ioulia; Duffy, Celia; Morton, Frances; Hadden, Elizabeth; Potter, John; De Bezenac, Christophe; Whyton, Tony; Himonides, Evangelos; Welch, Graham

2008-01-01

The research project "Investigating Musical Performance: Comparative Studies in Advanced Musical Learning" was devised to investigate how classical, popular, jazz and Scottish traditional musicians deepen and develop their learning about performance in undergraduate, postgraduate and wider music community contexts. The aim of this paper is to…

Spectral analyses of systolic blood pressure and heart rate variability and their association with cognitive performance in elderly hypertensive subjects.

Science.gov (United States)

Santos, W B; Matoso, J M D; Maltez, M; Gonçalves, T; Casanova, M; Moreira, I F H; Lourenço, R A; Monteiro, W D; Farinatti, P T V; Soares, P P; Oigman, W; Neves, M F T; Correia, M L G

2015-08-01

Systolic hypertension is associated with cognitive decline in the elderly. Altered blood pressure (BP) variability is a possible mechanism of reduced cognitive performance in elderly hypertensives. We hypothesized that altered beat-to-beat systolic BP variability is associated with reduced global cognitive performance in elderly hypertensive subjects. In exploratory analyses, we also studied the correlation between diverse discrete cognitive domains and indices of systolic BP and heart rate variability. Disproving our initial hypothesis, we have shown that hypertension and low education, but not indices of systolic BP and heart rate variability, were independent predictors of lower global cognitive performance. However, exploratory analyses showed that the systolic BP variability in semi-upright position was an independent predictor of matrix reasoning (B = 0.08 ± .03, P-value = 0.005), whereas heart rate variability in semi-upright position was an independent predictor of the executive function score (B = -6.36 ± 2.55, P-value = 0.02). We conclude that myogenic vascular and sympathetic modulation of systolic BP do not contribute to reduced global cognitive performance in treated hypertensive subjects. Nevertheless, our results suggest that both systolic BP and heart rate variability might be associated with modulation of frontal lobe cognitive domains, such as executive function and matrix reasoning.

Statistical analyses of variability/reproducibility of environmentally assisted cyclic crack growth rate data utilizing JAERI Material Performance Database (JMPD)

International Nuclear Information System (INIS)

Tsuji, Hirokazu; Yokoyama, Norio; Nakajima, Hajime; Kondo, Tatsuo

1993-05-01

Statistical analyses were conducted by using the cyclic crack growth rate data for pressure vessel steels stored in the JAERI Material Performance Database (JMPD), and comparisons were made on variability and/or reproducibility of the data between obtained by ΔK-increasing and by ΔK-constant type tests. Based on the results of the statistical analyses, it was concluded that ΔK-constant type tests are generally superior to the commonly used ΔK-increasing type ones from the viewpoint of variability and/or reproducibility of the data. Such a tendency was more pronounced in the tests conducted in simulated LWR primary coolants than those in air. (author)

Analysing data from observer studies in medical imaging research: An introductory guide to free-response techniques

International Nuclear Information System (INIS)

Thompson, J.D.; Manning, D.J.; Hogg, P.

2014-01-01

Observer performance methods maintain their place in radiology research, particularly in the assessment of the diagnostic accuracy of new and existing techniques, despite not being fully embraced by the wider audience in medical imaging. The receiver operating characteristic (ROC) paradigm has been widely used in research and the latest location sensitive methods allow an analysis that is closer to the clinical scenario. This paper discusses the underpinning theories behind observer performance assessment, exploring the potential sources of error and the development of the ROC method. The paper progresses by explaining the clinical relevance and statistical suitability of the free-response ROC (FROC) paradigm, and the methodological considerations for those wishing to perform an observer performance study

Analyse of Maintenance Cost in ST

CERN Document Server

Jenssen, B W

2001-01-01

An analyse has been carried out in ST concerning the total costs for the division. Even though the target was the maintenance costs in ST, the global budget over has been analysed. This has been done since there is close relation between investments & consolidation and the required level for maintenance. The purpose of the analyse was to focus on maintenance cost in ST as a ratio of total maintenance costs over the replacement value of the equipment, and to make some comparisons with other industries and laboratories. Families of equipment have been defined and their corresponding ratios calculated. This first approach gives us some "quantitative" measurements. This analyse should be combined with performance indicators (more "qualitative" measurements) that are telling us how well we are performing. This will help us in defending our budget, make better priorities, and we will satisfy the requirements from our external auditors.

Workplace rights: a popular theater performance.

Science.gov (United States)

Becker, Meryl; Rabin, Richard

2014-01-01

Theater acting can help build the social skills needed for effective communication at work and in the wider community. The following short play is about workers fighting for their rights at a textile factory in the early 20th century. It was written by an adult education teacher, performed by her students and attended by the school's students and teachers.

A tale of five cities: Using recycling frameworks to analyse inclusive recycling performance.

Science.gov (United States)

Scheinberg, Anne; Simpson, Michael

2015-11-01

'Recycling' is a source of much confusion, particularly when comparing solid waste systems in high-income countries with those in low- and middle-income countries. Few analysts can explain why the performance and structure of recycling appears to be so different in rich countries from poor ones, nor why well-meaning efforts to implement recycling so often fail. The analysis of policy drivers, and the Integrated Sustainable Waste Management (ISWM) framework, come close to an explanation.This article builds on these earlier works, focusing in on five cities profiled in the 2010 UN-Habitat publication (Scheinberg A, Wilson DC and Rodic L (2010) Solid Waste Management in the World's Cities. UN-Habitat's Third Global Report on the State of Water and Sanitation in the World's Cities. Newcastle-on-Tyne, UK: Earthscan Publications). Data from these cities and others provides the basis for developing a new tool to analyse inclusive recycling performance. The points of departure are the institutional and economic relationships between the service chain, the public obligation to remove waste, pollution, and other forms of disvalue, and the value chain, a system of private enterprises trading valuable materials and providing markets for recyclables. The methodological innovation is to use flows of materials and money as indicators of institutional relationships, and is an extension of process flow diagramming.The authors are using the term 'recycling framework analysis' to describe this new form of institutional analysis. The diagrams increase our understanding of the factors that contribute to high-performance inclusive recycling. By focusing on institutional relationships, the article seeks to improve analysis, planning, and ultimately, outcomes, of recycling interventions. © The Author(s) 2015.

The Wider Spatial-Economic Impacts of High-Speed Trains: A Comparative Case Study of the Lille and Manchester Sub-Regions

OpenAIRE

Chia-Lin Chen; Peter Hall

2011-01-01

This paper will present empirical evidence on the wider spatial-economic impacts of High Speed Trains (HSTs) at the intra-regional level. It represents follow-up research to a previous empirical study at inter-regional level, based on UKIC125- an upgraded HST system. The findings suggest that HST has had substantial and demonstrable effects in aiding this transition within a 2-hour travel limit of London, but that the effects have not been automatic or universal. The need for integrated plann...

Investigation of Forming Performance of Laminated Steel Sheets Using Finite Element Analyses

International Nuclear Information System (INIS)

Liu Wenning; Sun Xin; Ruokolainen, Robert; Gayden Xiaohong

2007-01-01

Laminated steel sheets have been used in automotive structures for reducing in-cabin noise. However, due to the marked difference in material properties of the different laminated layers, integrating laminated steel parts into the manufacturing processes can be challenging. Especially, the behavior of laminated sheets during forming processes is very different from that of monolithic steel sheets. During the deep-draw forming process, large shear deformation and corresponding high interfacial stress may initiate and propagate interfacial cracks between the core polymer and the metal skin, hence degrading the performance of the laminated sheets. In this paper, the formability of the laminated steel sheets is investigated by means of numerical analysis. The goal of this work is to gain insight into the relationship between the individual properties of the laminated sheet layers and the corresponding formability of the laminated sheet as a whole, eventually leading to reliable design and successful forming process development of such materials. Finite element analyses of laminate sheet forming are presented. Effects of polymer core thickness and viscoelastic properties of the polymer core, as well as punching velocity, are also investigated

Why is the sex gap in feelings of depression wider in high gender equity countries? The effect of children on the psychological well-being of men and women.

Science.gov (United States)

Hopcroft, Rosemary L; McLaughlin, Julie

2012-05-01

This study uses data from 23 countries in the World Values Survey and the National Survey of Families and Households and finds that the sex gap in feelings of depression is wider in high gender equity societies even though overall levels of feelings of depression are lower. Using hierarchical logistic modeling, we find that the sex difference in feelings of depression is wider in high gender equity societies because children increase depression for women in high gender equity societies, while they reduce depression for women without paid employment in low gender equity societies. There is little difference in the effect of children on feelings of depression for men across societies. Copyright © 2011 Elsevier Inc. All rights reserved.

Uncertainty Analyses and Strategy

International Nuclear Information System (INIS)

Kevin Coppersmith

2001-01-01

The DOE identified a variety of uncertainties, arising from different sources, during its assessment of the performance of a potential geologic repository at the Yucca Mountain site. In general, the number and detail of process models developed for the Yucca Mountain site, and the complex coupling among those models, make the direct incorporation of all uncertainties difficult. The DOE has addressed these issues in a number of ways using an approach to uncertainties that is focused on producing a defensible evaluation of the performance of a potential repository. The treatment of uncertainties oriented toward defensible assessments has led to analyses and models with so-called ''conservative'' assumptions and parameter bounds, where conservative implies lower performance than might be demonstrated with a more realistic representation. The varying maturity of the analyses and models, and uneven level of data availability, result in total system level analyses with a mix of realistic and conservative estimates (for both probabilistic representations and single values). That is, some inputs have realistically represented uncertainties, and others are conservatively estimated or bounded. However, this approach is consistent with the ''reasonable assurance'' approach to compliance demonstration, which was called for in the U.S. Nuclear Regulatory Commission's (NRC) proposed 10 CFR Part 63 regulation (64 FR 8640 [DIRS 101680]). A risk analysis that includes conservatism in the inputs will result in conservative risk estimates. Therefore, the approach taken for the Total System Performance Assessment for the Site Recommendation (TSPA-SR) provides a reasonable representation of processes and conservatism for purposes of site recommendation. However, mixing unknown degrees of conservatism in models and parameter representations reduces the transparency of the analysis and makes the development of coherent and consistent probability statements about projected repository

Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams

DEFF Research Database (Denmark)

Louter, C.; Nielsen, Jens Henrik

2013-01-01

This paper focuses on the numerical modelling of SentryGlas-laminated reinforced glass beams. In these beams, which have been experimentally investigated in preceding research, a stainless steel reinforcement section is laminated at the inner recessed edge of a triple-layer glass beam by means...... of SentryGlas (SG) interlayer sheets. The current contribution numerically investigates the effect of the SG-interlayer shear stiffness on the overall structural response of the beams. This is done by means of a 3D finite element model in which the individual glass layers, the SG......-interlayers and the reinforcement are incorporated. In the model, the glass parts are allowed to crack, but all other parts are assumed linear elastic throughout the analyses. By changing the shear modulus of the SG-interlayer in multiple analyses, its contribution to the overall structural performance of the beams - especially...

Methods and procedures for shielding analyses for the SNS

International Nuclear Information System (INIS)

Popova, I.; Ferguson, F.; Gallmeier, F.X.; Iverson, E.; Lu, Wei

2011-01-01

In order to provide radiologically safe Spallation Neutron Source operation, shielding analyses are performed according to Oak Ridge National Laboratory internal regulations and to comply with the Code of Federal Regulations. An overview of on-going shielding work for the accelerator facility and neutrons beam lines, methods used for the analyses, and associated procedures and regulations are presented. Methods used to perform shielding analyses are described as well. (author)

SURE: a system of computer codes for performing sensitivity/uncertainty analyses with the RELAP code

International Nuclear Information System (INIS)

Bjerke, M.A.

1983-02-01

A package of computer codes has been developed to perform a nonlinear uncertainty analysis on transient thermal-hydraulic systems which are modeled with the RELAP computer code. Using an uncertainty around the analyses of experiments in the PWR-BDHT Separate Effects Program at Oak Ridge National Laboratory. The use of FORTRAN programs running interactively on the PDP-10 computer has made the system very easy to use and provided great flexibility in the choice of processing paths. Several experiments simulating a loss-of-coolant accident in a nuclear reactor have been successfully analyzed. It has been shown that the system can be automated easily to further simplify its use and that the conversion of the entire system to a base code other than RELAP is possible

Paying health workers for performance in Battagram district, Pakistan

Directory of Open Access Journals (Sweden)

Javeed Sarah

2011-10-01

Full Text Available Abstract Background There is a growing interest in using pay-for-performance mechanisms in low and middle-income countries in order to improve the performance of health care providers. However, at present there is a dearth of independent evaluations of such approaches which can guide understanding of their potential and risks in differing contexts. This article presents the results of an evaluation of a project managed by an international non-governmental organisation in one district of Pakistan. It aims to contribute to learning about the design and implementation of pay-for-performance systems and their impact on health worker motivation. Methods Quantitative analysis was conducted of health management information system (HMIS data, financial records, and project documents covering the period 2007-2010. Key informant interviews were carried out with stakeholders at all levels. At facility level, in-depth interviews were held, as were focus group discussions with staff and community members. Results The wider project in Battagram had contributed to rebuilding district health services at a cost of less than US$4.5 per capita and achieved growth in outputs. Staff, managers and clients were appreciative of the gains in availability and quality of services. However, the role that the performance-based incentive (PBI component played was less clear--PBI formed a relatively small component of pay, and did not increase in line with outputs. There was little evidence from interviews and data that the conditional element of the PBIs influenced behaviour. They were appreciated as a top-up to pay, but remained low in relative terms, and only slightly and indirectly related to individual performance. Moreover, they were implemented independently of the wider health system and presented a clear challenge for longer term integration and sustainability. Conclusions Challenges for performance-based pay approaches include the balance of rewarding individual

New insights in geodynamics of wider Zagreb area: results of GPS measurements series 2009 on Zagreb Geodynamic Network

Science.gov (United States)

Pribičević, Boško; Medak, Damir; ĐApo, Almin

2010-05-01

The Geodynamic GPS-Network of the City of Zagreb represents the longest and the most intensive research effort in the field of geodynamics in Croatia. Since the establishment of the Network in 1997, several series of precise GPS measurements have been conducted on specially stabilized points of Geodynamical Network of City of Zagreb with purpose of investigation of tectonic movements and related seismic activity of the wider area of the City of Zagreb. The Network has been densified in 2005 in the most active region of northeastern Mount Medvednica. Since then, several GPS campaigns have been conducted including the last in summer 2009. The paper presents latest results of geodynamic movements of the network points.

Performance Optimization of Unglazed Nanofluid Photovoltaic/Thermal System: Energy and Exergy Analyses

Directory of Open Access Journals (Sweden)

M. Imtiaz Hussain

2018-01-01

Full Text Available The focus of this paper is to predict the transient response of a nanoengineered photovoltaic thermal (PV/T system in view of energy and exergy analyses. Instead of a circular-shaped receiver, a trapezoidal-shaped receiver is employed to increase heat transfer surface area with photovoltaic (PV cells for improvement of heat extraction and thus achievement of a higher PV/T system efficiency. The dynamic mathematical model is developed using MATLAB® software by considering real-time heat transfer coefficients. The proposed model is validated with experimental data from a previous study. Negligible discrepancies were found between measured and predicted data. The validated model was further investigated in detail using different nanofluids by dispersing copper oxide (CuO and aluminum oxide (Al2O3 in pure water. The overall performance of the nanoengineered PV/T system was compared to that of a PV/T system using water only, and optimal operating conditions were determined for maximum useful energy and exergy rates. The results indicated that the CuO/water nanofluid has a notable impact on the energy and exergy efficiencies of the PV/T system compared to that of Al2O3/water nanofluid and water only cases.

Devising a New Model of Demand-Based Learning Integrated with Social Networks and Analyses of its Performance

Directory of Open Access Journals (Sweden)

Bekim Fetaji

2018-02-01

Full Text Available The focus of the research study is to devise a new model for demand based learning that will be integrated with social networks such as Facebook, twitter and other. The study investigates this by reviewing the published literature and realizes a case study analyses in order to analyze the new models’ analytical perspectives of practical implementation. The study focuses on analyzing demand-based learning and investigating how it can be improved by devising a specific model that incorporates social network use. Statistical analyses of the results of the questionnaire through research of the raised questions and hypothesis showed that there is a need for introducing new models in the teaching process. The originality stands on the prologue of the social login approach to an educational environment, whereas the approach is counted as a contribution of developing a demand-based web application, which aims to modernize the educational pattern of communication, introduce the social login approach, and increase the process of knowledge transfer as well as improve learners’ performance and skills. Insights and recommendations are provided, argumented and discussed.

The effect of innovative activity in firm performance and development: Analysing data from eurozone

Directory of Open Access Journals (Sweden)

Ilias A. Makris

2016-06-01

Full Text Available Purpose – The purpose of this paper is to examine the effect of Innovative Activity on firm performance and growth. Active Research and Development is considered to be directly related with development, prosperity and growth, in micro and macro level and a key factor in hindering economic recession. Design/methodology/approach – We analyse economic data from listed firms of selected eurozone country-members in order to associate Research and Development with performance indicators in firm and country level. For that purpose, several firm data were collected from WorldScope data base and macroeconomic data from Worldbank database. The period examined is between 2002 and 2012, with a special focus on current financial crisis (after 2007. The empirical process includes, descriptive statistics and logistic regression analysis. Findings – Findings indicate the crucial effect of innovative process in economic performance and development in firm and country level. The latter highlights the urgent need for public support in order to spur innovative activity and high-tech exports, especially in countries that were heavily affected by recession. Research limitations/implications – Some research limitations are the large number of missing cases in WordScope database, as many firms after the beginning of current crisis exit stock market. Furthermore, the other part of the economy, the Small and Medium Enterprises does not exist in the analysis, as listed firms are mainly large and mature companies. Originality/value – The results tend to highlight the need for common policy measures in eurozone, in regard to such issues, instead of imposing horizontal budgetary constraints in specific countries (like Southern Europe, hindering the vicious recessionary circle.

An Integrated Signaling-Encryption Mechanism to Reduce Error Propagation in Wireless Communications: Performance Analyses

Energy Technology Data Exchange (ETDEWEB)

Olama, Mohammed M [ORNL; Matalgah, Mustafa M [ORNL; Bobrek, Miljko [ORNL

2015-01-01

Traditional encryption techniques require packet overhead, produce processing time delay, and suffer from severe quality of service deterioration due to fades and interference in wireless channels. These issues reduce the effective transmission data rate (throughput) considerably in wireless communications, where data rate with limited bandwidth is the main constraint. In this paper, performance evaluation analyses are conducted for an integrated signaling-encryption mechanism that is secure and enables improved throughput and probability of bit-error in wireless channels. This mechanism eliminates the drawbacks stated herein by encrypting only a small portion of an entire transmitted frame, while the rest is not subject to traditional encryption but goes through a signaling process (designed transformation) with the plaintext of the portion selected for encryption. We also propose to incorporate error correction coding solely on the small encrypted portion of the data to drastically improve the overall bit-error rate performance while not noticeably increasing the required bit-rate. We focus on validating the signaling-encryption mechanism utilizing Hamming and convolutional error correction coding by conducting an end-to-end system-level simulation-based study. The average probability of bit-error and throughput of the encryption mechanism are evaluated over standard Gaussian and Rayleigh fading-type channels and compared to the ones of the conventional advanced encryption standard (AES).

Evaluating the performance of commonly used gas analysers for methane eddy covariance flux measurements: the InGOS inter-comparison field experiment

NARCIS (Netherlands)

Peltola, O.; Hensen, A.; Helfter, C.; Belelli Marchesini, L.; Bosveld, F.C.; Bulk, van de W.C.M.; Elbers, J.A.; Haapanala, S.; Holst, J.; Laurila, T.; Lindroth, A.; Nemitz, E.; Röckmann, T.; Vermeulen, A.T.; Mammarella, I.

2014-01-01

The performance of eight fast-response methane (CH4) gas analysers suitable for eddy covariance flux measurements were tested at a grassland site near the Cabauw tall tower (Netherlands) during June 2012. The instruments were positioned close to each other in order to minimise the effect of varying

Evaluating the performance of commonly used gas analysers for methane eddy covariance flux measurements : the InGOS inter-comparison field experiment

NARCIS (Netherlands)

Peltola, O.; Hensen, A.; Helfter, C.; Belelli Marchesini, L.; Bosveld, F. C.; Van Den Bulk, W. C M; Elbers, J. A.; Haapanala, S.; Holst, J.; Laurila, T.; Lindroth, A.; Nemitz, E.; Röckmann, T.; Vermeulen, A. T.; Mammarella, I.

2014-01-01

The performance of eight fast-response methane (CH4) gas analysers suitable for eddy covariance flux measurements were tested at a grassland site near the Cabauw tall tower (Netherlands) during June 2012. The instruments were positioned close to each other in order to minimise the effect of varying

Evaluating the performance of commonly used gas analysers for methane eddy covariance flux measurements: the InGOS inter-comparison field experiment

NARCIS (Netherlands)

Peltola, O.; Hensen, A.; Helfter, C.; Belelli Marchesini, L.; Bosveld, F. C.; Van Den Bulk, W. C. M.; Elbers, J. A.; Haapanala, S.; Holst, J.; Laurila, T.; Lindroth, A.; Nemitz, E.; Röckmann, T.; Vermeulen, A. T.; Mammarella, I.

2014-01-01

The performance of eight fast-response methane (CH4) gas analysers suitable for eddy covariance flux measurements were tested at a grassland site near the Cabauw tall tower (Netherlands) during June 2012. The instruments were positioned close to each other in order to minimize the effect of varying

PWR plant transient analyses using TRAC-PF1

International Nuclear Information System (INIS)

Ireland, J.R.; Boyack, B.E.

1984-01-01

This paper describes some of the pressurized water reactor (PWR) transient analyses performed at Los Alamos for the US Nuclear Regulatory Commission using the Transient Reactor Analysis Code (TRAC-PF1). Many of the transient analyses performed directly address current PWR safety issues. Included in this paper are examples of two safety issues addressed by TRAC-PF1. These examples are pressurized thermal shock (PTS) and feed-and-bleed cooling for Oconee-1. The calculations performed were plant specific in that details of both the primary and secondary sides were modeled in addition to models of the plant integrated control systems. The results of these analyses show that for these two transients, the reactor cores remained covered and cooled at all times posing no real threat to the reactor system nor to the public

Chapter No.4. Safety analyses

International Nuclear Information System (INIS)

2002-01-01

In 2001 the activity in the field of safety analyses was focused on verification of the safety analyses reports for NPP V-2 Bohunice and NPP Mochovce concerning the new profiled fuel and probabilistic safety assessment study for NPP Mochovce. The calculation safety analyses were performed and expert reviews for the internal UJD needs were elaborated. An important part of work was performed also in solving of scientific and technical tasks appointed within bilateral projects of co-operation between UJD and its international partnership organisations as well as within international projects ordered and financed by the European Commission. All these activities served as an independent support for UJD in its deterministic and probabilistic safety assessment of nuclear installations. A special attention was paid to a review of probabilistic safety assessment study of level 1 for NPP Mochovce. The probabilistic safety analysis of NPP related to the full power operation was elaborated in the study and a contribution of the technical and operational improvements to the risk decreasing was quantified. A core damage frequency of the reactor was calculated and the dominant initiating events and accident sequences with the major contribution to the risk were determined. The target of the review was to determine the acceptance of the sources of input information, assumptions, models, data, analyses and obtained results, so that the probabilistic model could give a real picture of the NPP. The review of the study was performed in co-operation of UJD with the IAEA (IPSART mission) as well as with other external organisations, which were not involved in the elaboration of the reviewed document and probabilistic model of NPP. The review was made in accordance with the IAEA guidelines and methodical documents of UJD and US NRC. In the field of calculation safety analyses the UJD activity was focused on the analysis of an operational event, analyses of the selected accident scenarios

ATHENA/INTRA analyses for ITER, NSSR-2

International Nuclear Information System (INIS)

Shen, Kecheng; Eriksson, John; Sjoeberg, A.

1999-02-01

The present report is a summary report including thermal-hydraulic analyses made at Studsvik Eco and Safety AB for the ITER NSSR-2 safety documentation. The objective of the analyses was to reveal the safety characteristics of various heat transfer systems at specified operating conditions and to indicate the conditions for which there were obvious risks of jeopardising the structural integrity of the coolant systems. In the latter case also some analyses were made to indicate conceivable mitigating measures for maintaining the integrity.The analyses were primarily concerned with the First Wall and Divertor heat transfer systems. Several enveloping transients were analysed with associated specific flow and heat load boundary conditions. The analyses were performed with the ATHENA and INTRA codes

ATHENA/INTRA analyses for ITER, NSSR-2

Energy Technology Data Exchange (ETDEWEB)

Shen, Kecheng; Eriksson, John; Sjoeberg, A

1999-02-01

The present report is a summary report including thermal-hydraulic analyses made at Studsvik Eco and Safety AB for the ITER NSSR-2 safety documentation. The objective of the analyses was to reveal the safety characteristics of various heat transfer systems at specified operating conditions and to indicate the conditions for which there were obvious risks of jeopardising the structural integrity of the coolant systems. In the latter case also some analyses were made to indicate conceivable mitigating measures for maintaining the integrity.The analyses were primarily concerned with the First Wall and Divertor heat transfer systems. Several enveloping transients were analysed with associated specific flow and heat load boundary conditions. The analyses were performed with the ATHENA and INTRA codes 8 refs, 14 figs, 15 tabs

Physics Analyses in the Design of the HFIR Cold Neutron Source

International Nuclear Information System (INIS)

Bucholz, J.A.

1999-01-01

Physics analyses have been performed to characterize the performance of the cold neutron source to be installed in the High Flux Isotope Reactor at the Oak Ridge National Laboratory in the near future. This paper provides a description of the physics models developed, and the resulting analyses that have been performed to support the design of the cold source. These analyses have provided important parametric performance information, such as cold neutron brightness down the beam tube and the various component heat loads, that have been used to develop the reference cold source concept

Tailoring leisure to suit a wider audience through creative event planning with a multi-sensory approach.

Science.gov (United States)

Stonier, Claire L

2008-01-01

Caregiving for long-term conditions is increasingly focused on holistic "person centred" care [9,34], with leisure and recreation providing an important and essential part of maintaining quality of life. This article documents examples of large leisure events and creative projects. These were adapted for, and considered to be suitable and supportive of, the needs of adults with complex and profound disability as a result of neurological damage or disease. The ways in which events have been tailored by the Recreation and Leisure Service, incorporating sensory elements with the view to increased accessibility and enjoyment for participants, are highlighted in this article. The ultimate challenge faced was programming events to suit more than 170 people aged over 18 who each have particular preferences, varied interests and abilities including the most profound physical and cognitive impairments. These developments and changes in format have encouraged essential input from participants themselves and their families and carers, whilst involving the wider community; volunteers, external charitable groups and professional organisations.

Weighing Evidence "Steampunk" Style via the Meta-Analyser.

Science.gov (United States)

Bowden, Jack; Jackson, Chris

2016-10-01

The funnel plot is a graphical visualization of summary data estimates from a meta-analysis, and is a useful tool for detecting departures from the standard modeling assumptions. Although perhaps not widely appreciated, a simple extension of the funnel plot can help to facilitate an intuitive interpretation of the mathematics underlying a meta-analysis at a more fundamental level, by equating it to determining the center of mass of a physical system. We used this analogy to explain the concepts of weighing evidence and of biased evidence to a young audience at the Cambridge Science Festival, without recourse to precise definitions or statistical formulas and with a little help from Sherlock Holmes! Following on from the science fair, we have developed an interactive web-application (named the Meta-Analyser) to bring these ideas to a wider audience. We envisage that our application will be a useful tool for researchers when interpreting their data. First, to facilitate a simple understanding of fixed and random effects modeling approaches; second, to assess the importance of outliers; and third, to show the impact of adjusting for small study bias. This final aim is realized by introducing a novel graphical interpretation of the well-known method of Egger regression.

Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts

International Nuclear Information System (INIS)

Pereslavtsev, Pavel; Bachmann, Christian; Fischer, Ulrich

2016-01-01

Highlights: • Realistic 3D MCNP model based on the CAD engineering model of DEMO. • Automated procedure for the generation and arrangement of the blanket modules for different DEMO concepts: HCPB, HCLL, WCLL, DCLL. • Several parameters affecting tritium breeding ratio (TBR) were investigated. • A set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts. - Abstract: Neutronic analyses were performed to assess systematically the tritium breeding ratio (TBR) variations in the DEMO for the different blanket concepts HCPB, HCLL, WCLL and DCLL DEMOs due to modifications of the blanket configurations. A dedicated automated procedure was developed to fill the breeding modules in the common generic model in correspondence to the different concepts. The TBR calculations were carried out using the MCNP5 Monte Carlo code. The following parameters affecting the global TBR were investigated: TBR poloidal distribution, radial breeder zone depth, "6Li enrichment, steel content in the breeder modules, poloidal segmentation of the breeder blanket volume, size of gaps between blankets, thickness of the first wall and of the tungsten armour. Based on the results a set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts with the goal to achieve the required tritium breeding performance in DEMO.

Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts

Energy Technology Data Exchange (ETDEWEB)

Pereslavtsev, Pavel, E-mail: pavel.pereslavtsev@kit.edu [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Bachmann, Christian [EUROfusion – Programme Management Unit, Boltzmannstrasse 2, 85748 Garching (Germany); Fischer, Ulrich [Karlsruhe Institute for Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

2016-11-01

Highlights: • Realistic 3D MCNP model based on the CAD engineering model of DEMO. • Automated procedure for the generation and arrangement of the blanket modules for different DEMO concepts: HCPB, HCLL, WCLL, DCLL. • Several parameters affecting tritium breeding ratio (TBR) were investigated. • A set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts. - Abstract: Neutronic analyses were performed to assess systematically the tritium breeding ratio (TBR) variations in the DEMO for the different blanket concepts HCPB, HCLL, WCLL and DCLL DEMOs due to modifications of the blanket configurations. A dedicated automated procedure was developed to fill the breeding modules in the common generic model in correspondence to the different concepts. The TBR calculations were carried out using the MCNP5 Monte Carlo code. The following parameters affecting the global TBR were investigated: TBR poloidal distribution, radial breeder zone depth, {sup 6}Li enrichment, steel content in the breeder modules, poloidal segmentation of the breeder blanket volume, size of gaps between blankets, thickness of the first wall and of the tungsten armour. Based on the results a set of practical guidelines was prepared for the designers developing the individual breeding blanket concepts with the goal to achieve the required tritium breeding performance in DEMO.

Recriticality analyses for CAPRA cores

International Nuclear Information System (INIS)

Maschek, W.; Thiem, D.

1995-01-01

The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

Recriticality analyses for CAPRA cores

Energy Technology Data Exchange (ETDEWEB)

Maschek, W.; Thiem, D.

1995-08-01

The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

[Longitudinal and specific analyses of physical performance in handball].

Science.gov (United States)

Schwesig, R; Fieseler, G; Jungermann, P; Noack, F; Irlenbusch, L; Leuchte, S; Fischer, D

2012-09-01

Sports-specific, biomechanical measuring stations and measuring-station trainings have become common practice in many forms of sports and are an essential element of the complex assessment of physical performance. In handball, however, there is still considerable research potential in this respect as well as in the systematic generation and acquisition of the requirements profile and progress of strain. The prime objective of the longitudinal study was to determine the potential performance and development of handball players (3 rd league) in general and in terms of handball sport in particular. Another objective was to establish correlations between tests and indicators of performance in competitions. 13 handball players (age: 26.5 ± 3.6 years) were tested three times (before and after the pre-season preparation phase and at the end of the first half of the season) on two test days each. The examination was composed of sprint test (ST, day 1), handball-specific complex test (HBKT, day 1) and assessment of treadmill diagnostics (LD, day 2). The surveyed parameters were lactate and heart rate (LD/HBKT) as well as time (ST, HBKT) and the number of errors (HBKT). The cardiac (Hfmax = 201 min-1) and metabolic strain (lactate = 17.8 mmol/L) in the HBKT were very high. In the preparatory phase, the average magnitudes of effect registered were at d = 0.31 (ST parameter), d = 0.68 (HBKT parameter) and d = 0.98 (LD parameter). The most significant improvements throughout the entire period of time were registered in the parameters v2 (LD; η2 = 0.371), total goal-throwing time (HBKT; η2 = 0.250), total penalty time (HBKT; η2 = 0.236) and total round 2 (HBKT; η2 = 0.227). In HBKT and LD, the performance level was stabilised by the end of the first half of the season. In terms of speed, however, there was a decline in performance abilities. The competition performance has its highest degree of correlation with cardial (defense: r = -0.656) and metabolic (offensive: r = -0

Leadership and organizational performance : State of the art and research agenda

NARCIS (Netherlands)

Knies, E.; Jacobsen, Christian Bøtcher; Tummers, L.G.

2016-01-01

A large portion of the everyday discourse about leadership and leaders takes it for granted that leaders make a big difference in terms of performance. The football managers discussion is one clear example, the wider fascination with business leaders likewise marks this association – and so too the

Maintenance Plan for the Performance Assessments and Composite Analyses for the Area 3 and Area 5 Radioactive Waste Management Sites at the NTS

Energy Technology Data Exchange (ETDEWEB)

Vefa Yucel

2007-01-03

U.S. Department of Energy (DOE) Manual M 435.1-1 requires that performance assessments (PAs) and composite analyses (CAs) for low-level waste (LLW) disposal facilities be maintained by the field offices. This plan describes the activities performed to maintain the PA and the CA for the Area 3 and Area 5 Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS). This plan supersedes the Maintenance Plan for the Performance Assessments and Composite Analyses for the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada Test Site (DOE/NV/11718--491-REV 1, dated September 2002). The plan is based on U.S. Department of Energy (DOE) Order 435.1 (DOE, 1999a), DOE Manual M 435.1-1 (DOE, 1999b), the DOE M 435.1-1 Implementation Guide DOE G 435.1-1 (DOE, 1999c), and the Maintenance Guide for PAs and CAs (DOE, 1999d). The plan includes a current update on PA/CA documentation, a revised schedule, and a section on Quality Assurance.

Process-based interpretation of conceptual hydrological model performance using a multinational catchment set

Science.gov (United States)

Poncelet, Carine; Merz, Ralf; Merz, Bruno; Parajka, Juraj; Oudin, Ludovic; Andréassian, Vazken; Perrin, Charles

2017-08-01

Most of previous assessments of hydrologic model performance are fragmented, based on small number of catchments, different methods or time periods and do not link the results to landscape or climate characteristics. This study uses large-sample hydrology to identify major catchment controls on daily runoff simulations. It is based on a conceptual lumped hydrological model (GR6J), a collection of 29 catchment characteristics, a multinational set of 1103 catchments located in Austria, France, and Germany and four runoff model efficiency criteria. Two analyses are conducted to assess how features and criteria are linked: (i) a one-dimensional analysis based on the Kruskal-Wallis test and (ii) a multidimensional analysis based on regression trees and investigating the interplay between features. The catchment features most affecting model performance are the flashiness of precipitation and streamflow (computed as the ratio of absolute day-to-day fluctuations by the total amount in a year), the seasonality of evaporation, the catchment area, and the catchment aridity. Nonflashy, nonseasonal, large, and nonarid catchments show the best performance for all the tested criteria. We argue that this higher performance is due to fewer nonlinear responses (higher correlation between precipitation and streamflow) and lower input and output variability for such catchments. Finally, we show that, compared to national sets, multinational sets increase results transferability because they explore a wider range of hydroclimatic conditions.

Is a wider angle of the membranous urethra associated with incontinence after radical prostatectomy?

Science.gov (United States)

Soljanik, Irina; Bauer, Ricarda M; Becker, Armin J; Stief, Christian G; Gozzi, Christian; Solyanik, Olga; Brocker, Kerstin A; Kirchhoff, Sonja M

2014-12-01

To investigate whether differences in the anatomy and dynamics of the pelvic floor (PF) in patients after radical prostatectomy (RP) depicted on magnetic resonance imaging (MRI) are associated with continence status. In the prospective designed study, 24 patients with post-prostatectomy stress urinary incontinence were enrolled. Additionally, 10 continent patients after RP were matched for age, body mass index and perioperative parameters. All patients underwent continence assessment and MRI (TrueFISP sequence; TR 4.57 ms; TE 2.29 ms; slice thickness 7 mm; FOV 270 mm) 12 months after RP. Images were analyzed for membranous urethra length (MUL), angle of the membranous urethra (AMU), severity of periurethral/urethral fibrosis, lifting of the levator ani muscle, lowering of the posterior bladder wall (BPW), bladder neck (BN) and external urinary sphincter (EUS), and symphyseal rotation of these structures during the Valsalva maneuver and voiding. Compared to continent controls, incontinent patients showed a significant wider AMU during voiding (p = 0.002) and more pronounced lowering of the BN and EUS (p urethra as a result of anchoring of the BN and EUS in the PF appears to be an important functional factor with an essential impact on continence after RP. Functional MRI seems to be a helpful imaging tool for morphologic and dynamic evaluation of the PF.

Delineating species with DNA barcodes: a case of taxon dependent method performance in moths.

Directory of Open Access Journals (Sweden)

Mari Kekkonen

Full Text Available The accelerating loss of biodiversity has created a need for more effective ways to discover species. Novel algorithmic approaches for analyzing sequence data combined with rapidly expanding DNA barcode libraries provide a potential solution. While several analytical methods are available for the delineation of operational taxonomic units (OTUs, few studies have compared their performance. This study compares the performance of one morphology-based and four DNA-based (BIN, parsimony networks, ABGD, GMYC methods on two groups of gelechioid moths. It examines 92 species of Finnish Gelechiinae and 103 species of Australian Elachistinae which were delineated by traditional taxonomy. The results reveal a striking difference in performance between the two taxa with all four DNA-based methods. OTU counts in the Elachistinae showed a wider range and a relatively low (ca. 65% OTU match with reference species while OTU counts were more congruent and performance was higher (ca. 90% in the Gelechiinae. Performance rose when only monophyletic species were compared, but the taxon-dependence remained. None of the DNA-based methods produced a correct match with non-monophyletic species, but singletons were handled well. A simulated test of morphospecies-grouping performed very poorly in revealing taxon diversity in these small, dull-colored moths. Despite the strong performance of analyses based on DNA barcodes, species delineated using single-locus mtDNA data are best viewed as OTUs that require validation by subsequent integrative taxonomic work.

Complexity, Accuracy, Fluency and Lexis in Task-Based Performance: A Synthesis of the Ealing Research

Science.gov (United States)

Skehan, Peter; Foster, Pauline

2012-01-01

This chapter will present a research synthesis of a series of studies, termed here the Ealing research. The studies use the same general framework to conceptualise tasks and task performance, enabling easier comparability. The different studies, although each is self-contained, build into a wider picture of task performance. The major point of…

Advanced toroidal facility vaccuum vessel stress analyses

International Nuclear Information System (INIS)

Hammonds, C.J.; Mayhall, J.A.

1987-01-01

The complex geometry of the Advance Toroidal Facility (ATF) vacuum vessel required special analysis techniques in investigating the structural behavior of the design. The response of a large-scale finite element model was found for transportation and operational loading. Several computer codes and systems, including the National Magnetic Fusion Energy Computer Center Cray machines, were implemented in accomplishing these analyses. The work combined complex methods that taxed the limits of both the codes and the computer systems involved. Using MSC/NASTRAN cyclic-symmetry solutions permitted using only 1/12 of the vessel geometry to mathematically analyze the entire vessel. This allowed the greater detail and accuracy demanded by the complex geometry of the vessel. Critical buckling-pressure analyses were performed with the same model. The development, results, and problems encountered in performing these analyses are described. 5 refs., 3 figs

Mild performic acid oxidation enhances chromatographic and top down mass spectrometric analyses of histones.

Science.gov (United States)

Pesavento, James J; Garcia, Benjamin A; Streeky, James A; Kelleher, Neil L; Mizzen, Craig A

2007-09-01

Recent developments in top down mass spectrometry have enabled closely related histone variants and their modified forms to be identified and quantitated with unprecedented precision, facilitating efforts to better understand how histones contribute to the epigenetic regulation of gene transcription and other nuclear processes. It is therefore crucial that intact MS profiles accurately reflect the levels of variants and modified forms present in a given cell type or cell state for the full benefit of such efforts to be realized. Here we show that partial oxidation of Met and Cys residues in histone samples prepared by conventional methods, together with oxidation that can accrue during storage or during chip-based automated nanoflow electrospray ionization, confounds MS analysis by altering the intact MS profile as well as hindering posttranslational modification localization after MS/MS. We also describe an optimized performic acid oxidation procedure that circumvents these problems without catalyzing additional oxidations or altering the levels of posttranslational modifications common in histones. MS and MS/MS of HeLa cell core histones confirmed that Met and Cys were the only residues oxidized and that complete oxidation restored true intact abundance ratios and significantly enhanced MS/MS data quality. This allowed for the unequivocal detection, at the intact molecule level, of novel combinatorially modified forms of H4 that would have been missed otherwise. Oxidation also enhanced the separation of human core histones by reverse phase chromatography and decreased the levels of salt-adducted forms observed in ESI-FTMS. This method represents a simple and easily automated means for enhancing the accuracy and sensitivity of top down analyses of combinatorially modified forms of histones that may also be of benefit for top down or bottom up analyses of other proteins.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation: Control modules C4, C6

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U. S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This volume is part of the manual related to the control modules for the newest updated version of this computational package.

A compact CCD-monitored atomic force microscope with optical vision and improved performances.

Science.gov (United States)

Mingyue, Liu; Haijun, Zhang; Dongxian, Zhang

2013-09-01

A novel CCD-monitored atomic force microscope (AFM) with optical vision and improved performances has been developed. Compact optical paths are specifically devised for both tip-sample microscopic monitoring and cantilever's deflection detecting with minimized volume and optimal light-amplifying ratio. The ingeniously designed AFM probe with such optical paths enables quick and safe tip-sample approaching, convenient and effective tip-sample positioning, and high quality image scanning. An image stitching method is also developed to build a wider-range AFM image under monitoring. Experiments show that this AFM system can offer real-time optical vision for tip-sample monitoring with wide visual field and/or high lateral optical resolution by simply switching the objective; meanwhile, it has the elegant performances of nanometer resolution, high stability, and high scan speed. Furthermore, it is capable of conducting wider-range image measurement while keeping nanometer resolution. Copyright © 2013 Wiley Periodicals, Inc.

Evaluating the performance of commonly used gas analysers for methane eddy covariance flux measurements: the InGOS inter-comparison field experiment

Science.gov (United States)

Peltola, O.; Hensen, A.; Helfter, C.; Belelli Marchesini, L.; Bosveld, F. C.; van den Bulk, W. C. M.; Elbers, J. A.; Haapanala, S.; Holst, J.; Laurila, T.; Lindroth, A.; Nemitz, E.; Röckmann, T.; Vermeulen, A. T.; Mammarella, I.

2014-06-01

The performance of eight fast-response methane (CH4) gas analysers suitable for eddy covariance flux measurements were tested at a grassland site near the Cabauw tall tower (Netherlands) during June 2012. The instruments were positioned close to each other in order to minimise the effect of varying turbulent conditions. The moderate CH4 fluxes observed at the location, of the order of 25 nmol m-2 s-1, provided a suitable signal for testing the instruments' performance. Generally, all analysers tested were able to quantify the concentration fluctuations at the frequency range relevant for turbulent exchange and were able to deliver high-quality data. The tested cavity ringdown spectrometer (CRDS) instruments from Picarro, models G2311-f and G1301-f, were superior to other CH4 analysers with respect to instrumental noise. As an open-path instrument susceptible to the effects of rain, the LI-COR LI-7700 achieved lower data coverage and also required larger density corrections; however, the system is especially useful for remote sites that are restricted in power availability. In this study the open-path LI-7700 results were compromised due to a data acquisition problem in our data-logging setup. Some of the older closed-path analysers tested do not measure H2O concentrations alongside CH4 (i.e. FMA1 and DLT-100 by Los Gatos Research) and this complicates data processing since the required corrections for dilution and spectroscopic interactions have to be based on external information. To overcome this issue, we used H2O mole fractions measured by other gas analysers, adjusted them with different methods and then applied them to correct the CH4 fluxes. Following this procedure we estimated a bias of the order of 0.1 g (CH4) m-2 (8% of the measured mean flux) in the processed and corrected CH4 fluxes on a monthly scale due to missing H2O concentration measurements. Finally, cumulative CH4 fluxes over 14 days from three closed-path gas analysers, G2311-f (Picarro Inc

Enabling Detailed Energy Analyses via the Technology Performance Exchange: Preprint

Energy Technology Data Exchange (ETDEWEB)

Studer, D.; Fleming, K.; Lee, E.; Livingood, W.

2014-08-01

One of the key tenets to increasing adoption of energy efficiency solutions in the built environment is improving confidence in energy performance. Current industry practices make extensive use of predictive modeling, often via the use of sophisticated hourly or sub-hourly energy simulation programs, to account for site-specific parameters (e.g., climate zone, hours of operation, and space type) and arrive at a performance estimate. While such methods are highly precise, they invariably provide less than ideal accuracy due to a lack of high-quality, foundational energy performance input data. The Technology Performance Exchange was constructed to allow the transparent sharing of foundational, product-specific energy performance data, and leverages significant, external engineering efforts and a modular architecture to efficiently identify and codify the minimum information necessary to accurately predict product energy performance. This strongly-typed database resource represents a novel solution to a difficult and established problem. One of the most exciting benefits is the way in which the Technology Performance Exchange's application programming interface has been leveraged to integrate contributed foundational data into the Building Component Library. Via a series of scripts, data is automatically translated and parsed into the Building Component Library in a format that is immediately usable to the energy modeling community. This paper (1) presents a high-level overview of the project drivers and the structure of the Technology Performance Exchange; (2) offers a detailed examination of how technologies are incorporated and translated into powerful energy modeling code snippets; and (3) examines several benefits of this robust workflow.

Terrorists on Trial: A Performative Perspective

Directory of Open Access Journals (Sweden)

Beatrice de Graaf

2011-03-01

Full Text Available On 30 March 2011, ICCT organised an Expert Meeting entitled “Terrorism Trials as Theatre: A Performative Perspective”. The Expert Meeting applied a performative perspective to three well known and recent trials in different parts of the world: the trials against the Dutch Hofstad Group, the Mumbai 2008 Terrorist Attack Trial and the Guantanamo Military Tribunals. As such, the Expert Meeting did not concentrate solely on the immediate judicial performance of the magistrates and/or the defence; instead, the trials were put in their wider sociological context, adopting notions of social drama and communication sciences. This Expert Meeting Paper is a further adaptation of the Discussion Paper that was used as basis for debate during the Meeting.

The role of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

Stenhouse, M.J.

1998-01-01

Performance assessment has many applications in the field of radioactive waste management, none more important than demonstrating the suitability of a particular repository system for waste disposal. The role of performance assessment in radioactive waste disposal is discussed with reference to assessments performed in civilian waste management programmes. The process is, however, relevant, and may be applied directly to the disposal of defence-related wastes. When used in an open and transparent manner, performance assessment is a powerful methodology not only for convincing the authorities of the safety of a disposal concept, but also for gaining the wider acceptance of the general public for repository siting. 26 refs

Ontological insecurity and subjective feelings of unsafety: Analysing socially constructed fears in Italy.

Science.gov (United States)

Valente, Riccardo; Valera Pertegas, Sergi

2018-03-01

Perception of insecurity arises as a complex social phenomenon affected by factors that go beyond actual crime rates. Previous contributions to the field of fear of crime studies have shown, for instance, that the perception of social and physical disorder may generate insecurity among residents even in contexts where crime is comparatively low. Meanwhile, sociological approaches have led to a conceptualization of insecurity as an umbrella sentiment grounded in a wider feeling of unease. Building further on this assumption, data gathered in a large-scale survey in Italy (n = 15,428) were analysed by implementing exploratory and confirmatory factor analysis with the objective of assessing the validity of a model of "ontological insecurity". The results of our analysis support a conceptualization of insecurity where socially constructed anxieties (due to health and financial precariousness), as well as ethnic, sexual and religious-based stigmatization, play a prominent role in determining an individual's feeling of insecurity. Copyright © 2017 Elsevier Inc. All rights reserved.

Social Performance vs. Financial Performance: CSR Disclosures as an indicator of social performance

Directory of Open Access Journals (Sweden)

İlker Yılmaz

2013-04-01

Full Text Available In recent decades, it is gaining more and more dominance in both academic and business life that the company exists for and has responsibilities toward a wider group of stakeholders and it must have some objectives other than profitability. To achieve sustainable development and growth, the companies must assume more duties, which is called the term “corporate social responsibility (CSR.” In the literature, it is questioned whether CSR activities benefit the company or not; whether there is any relationship exists between CSR activities and the company’s financial performance and the direction of the relationship. We aimed to explore that whether there is any effect corporate social performance (CSP on financial performance and position and vice versa. We performed content analysis through annual reports and derived a social score composed of the items included in disclosure guidelines and some criteria used in CSR ratings. We also used several financial position and financial performance indicators. In order to explore the relationship between CSP and financial indicators, we run panel data regressions. We found significant results for some of the indicators, where some of the indicators gave insignificant results. The reporting of CSR activities is in very low levels. The conscious toward CSR and sustainability must be promoted and the companies must assume more active roles. The reporting of those activities is also important.

Thermal Performance Analyses of Multiborehole Ground Heat Exchangers

Directory of Open Access Journals (Sweden)

Wanjing Luo

2017-01-01

Full Text Available Geothermal energy known as a clean, renewable energy resource is widely available and reliable. Ground heat exchangers (GHEs can assist the development of geothermal energy by reducing the capital cost and greenhouse gas emission. In this paper, a novel semianalytical method was developed to study the thermal performance of multiborehole ground heat exchangers (GHEs with arbitrary configurations. By assuming a uniform inlet fluid temperature (UIFT, instead of uniform heat flux (UHF, the effects of thermal interference and the thermal performance difference between different boreholes can be examined. Simulation results indicate that the monthly average outlet fluid temperatures of GHEs will increase gradually while the annual cooling load of the GHEs is greater than the annual heating load. Besides, two mechanisms, the thermal dissipation and the heat storage effect, will determine the heat transfer underground, which can be further divided into four stages. Moreover, some boreholes will be malfunctioned; that is, boreholes can absorb heat from ground when the GHEs are under the cooling mode. However, as indicated by further investigations, this malfunction can be avoided by increasing borehole spacing.

Medicare Advantage and Fee-for-Service Performance on Clinical Quality and Patient Experience Measures: Comparisons from Three Large States.

Science.gov (United States)

Timbie, Justin W; Bogart, Andy; Damberg, Cheryl L; Elliott, Marc N; Haas, Ann; Gaillot, Sarah J; Goldstein, Elizabeth H; Paddock, Susan M

2017-12-01

To compare performance between Medicare Advantage (MA) and Fee-for-Service (FFS) Medicare during a time of policy changes affecting both programs. Performance data for 16 clinical quality measures and 6 patient experience measures for 9.9 million beneficiaries living in California, New York, and Florida. We compared MA and FFS performance overall, by plan type, and within service areas associated with contracts between CMS and MA organizations. Case mix-adjusted analyses (for measures not typically adjusted) were used to explore the effect of case mix on MA/FFS differences. Performance measures were submitted by MA organizations, obtained from the nationwide fielding of the Medicare Consumer Assessment of Healthcare Providers and Systems (MCAHPS) Survey, or derived from claims. Overall, MA outperformed FFS on all 16 clinical quality measures. Differences were large for HEDIS measures and small for Part D measures and remained after case mix adjustment. MA enrollees reported better experiences overall, but FFS beneficiaries reported better access to care. Relative to FFS, performance gaps were much wider for HMOs than PPOs. Excluding HEDIS measures, MA/FFS differences were much smaller in contract-level comparisons. Medicare Advantage/Fee-for-Service differences are often large but vary in important ways across types of measures and contracts. © Health Research and Educational Trust.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation: Functional modules F1-F8

International Nuclear Information System (INIS)

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This volume consists of the section of the manual dealing with eight of the functional modules in the code. Those are: BONAMI - resonance self-shielding by the Bondarenko method; NITAWL-II - SCALE system module for performing resonance shielding and working library production; XSDRNPM - a one-dimensional discrete-ordinates code for transport analysis; XSDOSE - a module for calculating fluxes and dose rates at points outside a shield; KENO IV/S - an improved monte carlo criticality program; COUPLE; ORIGEN-S - SCALE system module to calculate fuel depletion, actinide transmutation, fission product buildup and decay, and associated radiation source terms; ICE

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation: Functional modules F1-F8

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This volume consists of the section of the manual dealing with eight of the functional modules in the code. Those are: BONAMI - resonance self-shielding by the Bondarenko method; NITAWL-II - SCALE system module for performing resonance shielding and working library production; XSDRNPM - a one-dimensional discrete-ordinates code for transport analysis; XSDOSE - a module for calculating fluxes and dose rates at points outside a shield; KENO IV/S - an improved monte carlo criticality program; COUPLE; ORIGEN-S - SCALE system module to calculate fuel depletion, actinide transmutation, fission product buildup and decay, and associated radiation source terms; ICE.

Applicability of a Diffuse Reflectance Infrared Fourier Transform handheld spectrometer to perform in situ analyses on Cultural Heritage materials.

Science.gov (United States)

Arrizabalaga, Iker; Gómez-Laserna, Olivia; Aramendia, Julene; Arana, Gorka; Madariaga, Juan Manuel

2014-08-14

This work studies the applicability of a Diffuse Reflectance Infrared Fourier Transform handheld device to perform in situ analyses on Cultural Heritage assets. This portable diffuse reflectance spectrometer has been used to characterise and diagnose the conservation state of (a) building materials of the Guevara Palace (15th century, Segura, Basque Country, Spain) and (b) different 19th century wallpapers manufactured by the Santa Isabel factory (Vitoria-Gasteiz, Basque Country, Spain) and by the well known Dufour and Leroy manufacturers (Paris, France), all of them belonging to the Torre de los Varona Castle (Villanañe, Basque Country, Spain). In all cases, in situ measurements were carried out and also a few samples were collected and measured in the laboratory by diffuse reflectance spectroscopy (DRIFT) in order to validate the information obtained by the handheld instrument. In the analyses performed in situ, distortions in the diffuse reflectance spectra can be observed due to the presence of specular reflection, showing the inverted bands caused by the Reststrahlen effect, in particular on those IR bands with the highest absorption coefficients. This paper concludes that the results obtained in situ by a diffuse reflectance handheld device are comparable to those obtained with laboratory diffuse reflectance spectroscopy equipment and proposes a few guidelines to acquire good spectra in the field, minimising the influence caused by the specular reflection. Copyright © 2014 Elsevier B.V. All rights reserved.

Ambient concentrations of total suspended particulate matter and its elemental constituents at the wider area of the mining facilities of TVX Hellas in Chalkidiki, Greece.

Science.gov (United States)

Gaidajis, George

2003-01-01

To assess ambient air quality at the wider area of TVX Hellas mining facilities, the Total Suspended Particulate matter (TSP) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn are being monitored for more than thirty months as part of the established Environmental Monitoring Program. High Volume air samplers equipped with Tissue Quartz filters were employed for the collection of TSP. Analyses were effected after digestion of the suspended particulate with an HNO3-HCl solution and determination of elemental concentrations with an Atomic Absorption Spectroscopy equipped with graphite furnace. The sampling stations were selected to record representatively the existing ambient air quality in the vicinity of the facilities and at remote sites not affected from industrial activities. Monitoring data indicated that the background TSP concentrations ranged from 5-60 microg/m3. Recorded TSP concentrations at the residential sites close to the facilities ranged between 20-100 microg/m3, indicating only a minimal influence from the mining and milling activities. Similar spatial variation was observed for the TSP constituents and specifically for Pb and Zn. To validate the monitoring procedures, a parallel sampling campaign took place with different High Volume samplers at days where low TSP concentrations were expected. The satisfactory agreement (+/- 11%) at low concentrations (50-100 microg/m3) clearly supported the reproducibility of the techniques employed specifically at the critical range of lower concentrations.

Safety analyses for reprocessing and waste processing

International Nuclear Information System (INIS)

1983-03-01

Presentation of an incident analysis of process steps of the RP, simplified considerations concerning safety, and safety analyses of the storage and solidification facilities of the RP. A release tree method is developed and tested. An incident analysis of process steps, the evaluation of the SRL-study and safety analyses of the storage and solidification facilities of the RP are performed in particular. (DG) [de

Plädoyer wider eine (medien-pädagogische Universalpragmatik. Für die "Medienperformanz"

Directory of Open Access Journals (Sweden)

Christine Trültzsch-Wijnen

2016-12-01

Full Text Available Ausgehend von Dieter Baackes Medienkompetenzbegriff und den Diskussionen zur media literacy referiert die Autorin die (linguistische und sprachphilosophische Herkunft des Kompetenzdiskurses bei Saussure, Chomsky, Searle und Habermas, um zu erläutern, wie noch die Unterscheidung von Medienkritik, Medienkunde, Mediennutzung und Mediengestaltung in den aktuellen Diskussionen von einer Schärfung der Unterscheidung von Kompetenz und Performanz profitieren kann. Insbesondere die Diskussionen zum "Medialen Habitus" sind dabei eine Referenz, um medienpädagogische Fragen nach der sozialen Ungleichheit in den Mittelpunkt zu rücken. Dabei wird betont, dass ein geschärfter Blick auf die Performanz nach wie vor ein Desiderat der medienpädagogischen Forschung darstellt. Insgesamt stellt der Beitrag ein Plädoyer für eine sozial gerechte Medienpädagogik dar. Starting from Dieter Baackes media literacy concept and the actual discussions on media literacy the author analyses the (linguistic and philosophical origins of competence discourse referring Saussure, Chomsky, Searle and Habermas to explain how even the distinction of media criticism, media studies, media usage and media design in the current discussions can benefit of a sharpening of the distinction between competence and performance. In particular, the discussions about "Media Habitus" are a reference to focus on questions of social inequality. It is emphasized that a keen eye on "performance" still represents a desideratum of research in media education. Overall, the article presents a plea for social justice in media education.

Is there a curse of relocation? Analysing the causal link between offshoring and the innovation performance of (small) firms

DEFF Research Database (Denmark)

Mitze, Timo; Kreutzer, Fabian

2017-01-01

We analyse the empirical link between offshoring activities and different dimensions of innovation performance at the firm-level. In order to identify causal effects running from offshoring to innovation, we use a quasi-experimental comparison group approach by means of (conditional) difference......-in-difference estimations applied to German establishment-level data for firms that conducted offshoring activities in the period 2007–13. We find that the international relocation of business functions has a negative impact on the firms’ propensity to be innovative in terms of product and process innovations as well...

Performance study of Ke factors in simplified elastic plastic fatigue analyses with emphasis on thermal cyclic loading

International Nuclear Information System (INIS)

Lang, Hermann; Rudolph, Juergen; Ziegler, Rainer

2011-01-01

As code-based fully elastic plastic code conforming fatigue analyses are still time consuming, simplified elastic plastic analysis is often applied. This procedure is known to be overly conservative for some conditions due to the applied plastification (penalty) factor K e . As a consequence, less conservative fully elastic plastic fatigue analyses based on non-linear finite element analyses (FEA) or simplified elastic plastic analysis based on more realistic K e factors have to be used for fatigue design. The demand for more realistic K e factors is covered as a requirement of practical fatigue analysis. Different code-based K e procedures are reviewed in this paper with special regard to performance under thermal cyclic loading conditions. Other approximation formulae such as those by Neuber, Seeger/Beste or Kuehnapfel are not evaluated in this context because of their applicability to mechanical loading excluding thermal cyclic loading conditions typical for power plant operation. Besides the current code-based K e corrections, the ASME Code Case N-779 (e.g. Adam's proposal) and its modification in ASME Section VIII is considered. Comparison of elastic plastic results and results from the Rules for Nuclear Facility Components and Rules for Pressure Vessels reveals a considerable overestimation of usage factor in the case of ASME III and KTA 3201.2 for the examined examples. Usage factors according to RCC-M, Adams (ASME Code Case N-779), ASME VIII (alternative) and EN 13445-3 are essentially comparable and less conservative for these examples. The K v correction as well as the applied yield criterion (Tresca or von Mises) essentially influence the quality of the more advanced plasticity corrections (e.g. ASME Code Case N-779 and RCC-M). Hence, new proposals are based on a refined K v correction.

Employee attitudes towards aggression in persons with dementia: Readiness for wider adoption of person-centered frameworks.

Science.gov (United States)

Burshnic, V L; Douglas, N F; Barker, R M

2018-04-01

Person-centered care, as compared to standard approaches, is a widely accepted, evidence-based approach for managing aggressive behaviour in persons with dementia. The attitudes, beliefs and values of long-term care and mental health nursing employees are important prerequisites to implementing person-centered practices. Research shows that nursing employees typically support person-centered approaches; however, less is known about the attitudes of non-nursing employee groups. Nurse managers and administrators tended to agree with person-centered approaches for managing aggression in dementia, suggesting some prerequisites are in place to support wider adoption of person-centered frameworks. Employees with more resident contact tended to support person-centered approaches the least, suggesting discipline-specific trainings may not be adequate for preparing frontline staff to use person-centered techniques. Attitudes towards aggressive behaviour may be especially varied and contradictory within certain employee groups, providing implications for facility-wide initiatives. Person-centered values and practices should be monitored and reinforced across the organization. Person-centered trainings should be interdisciplinary in nature and focused on care areas, such as mealtime or bathing. Long-term care facilities should consider allowing nurse management and registered nurses to share the burden of direct resident care with frontline employees on a more regular basis. Introduction Implementing person-centered care requires shared attitudes, beliefs and values among all care employees. Existing research has failed to examine the attitudes of non-nursing employees. Aim This study examined attitudes towards aggression among nursing and non-nursing employees to address gaps in existing research and assess readiness for wider adoption of person-centered frameworks. Method The Management of Aggression in People with Dementia Attitude Questionnaire was used to survey

Accelerated safety analyses - structural analyses Phase I - structural sensitivity evaluation of single- and double-shell waste storage tanks

International Nuclear Information System (INIS)

Becker, D.L.

1994-11-01

Accelerated Safety Analyses - Phase I (ASA-Phase I) have been conducted to assess the appropriateness of existing tank farm operational controls and/or limits as now stipulated in the Operational Safety Requirements (OSRs) and Operating Specification Documents, and to establish a technical basis for the waste tank operating safety envelope. Structural sensitivity analyses were performed to assess the response of the different waste tank configurations to variations in loading conditions, uncertainties in loading parameters, and uncertainties in material characteristics. Extensive documentation of the sensitivity analyses conducted and results obtained are provided in the detailed ASA-Phase I report, Structural Sensitivity Evaluation of Single- and Double-Shell Waste Tanks for Accelerated Safety Analysis - Phase I. This document provides a summary of the accelerated safety analyses sensitivity evaluations and the resulting findings

Educational Policy and Practice from the Perspective of Institutional Theory: Crafting a Wider Lens

Science.gov (United States)

Burch, Patricia

2007-01-01

Institutional analyses of public education have increased in number in recent years. However, studies in education drawing on institutional analyses have not fully incorporated recent contributions from institutional theory, particularly relative to other domains such as law and health policy. The author sketches a framework that integrates recent…

Performance drivers in SOES: Botswana power corporation perspective

Directory of Open Access Journals (Sweden)

Mbako Mbo

2016-08-01

Full Text Available This paper investigates performance drivers in a State Owned Enterprise from a perspective of contending organizational theories. It is based on BPC, an SOE that has gone through varied performance trends under different business models over the last 44 years. The study uses both qualitative and quantitative data from the last 15 years and finds that good performance has been supported by notions of the agency, stewardship and resource theories while a blanket pursuit of the stakeholder theory undermined sustainable performance, just as public choice theory implications. Two perspectives emerge: a broadened view of the agency theory reconciling traditional shareholder centric interests with those of the wider society and a residual societal benefits inherent in the public choice theory

An Allegory of Addiction Recovery: Exploring the Performance of "Eumenides" by Aeschylus, as Adapted by 18 ANO Theatre Group

Science.gov (United States)

Zontou, Zoe

2013-01-01

This paper examines the performance of the "Eumenides," as adapted and performed by 18 ANO theatre group. 18 ANO is the theatre group of the Drug dependence treatment unit 18 ANO of Attica's Psychiatric Hospital, which is based in Athens, Greece. Each year 18 ANO organises performances in the wider community with the aim of promoting…

Analysing the temporal dynamics of model performance for hydrological models

NARCIS (Netherlands)

Reusser, D.E.; Blume, T.; Schaefli, B.; Zehe, E.

2009-01-01

The temporal dynamics of hydrological model performance gives insights into errors that cannot be obtained from global performance measures assigning a single number to the fit of a simulated time series to an observed reference series. These errors can include errors in data, model parameters, or

THE PROFESSIONAL LEARNER AND PERFORMER

Directory of Open Access Journals (Sweden)

Florian Pertzborn

2011-12-01

Full Text Available This study investigates the field of higher education and expertise development for learning and performing the double bass. The aim is to draw a picture of how the double bass is currently learned and performed by the learning student, the supervising professor and the performer working in a symphony orchestra, to find out whether if there were any significant differences between the three groups in their approaches to practice and performance. Results indicated that the achievement of expertise on the double bass is multifaceted and implies the development of multiple tasks and skills which soon have to be fostered and experienced in the field of learning and performing. Significant differences between the three groups were detected in the area of demography, experiences, knowledge, and their approaches to practice. Recommendations and implications for further investigation indicate that a wider perspective of learning, practice, self-evaluation in combination of the usage of technology for practice support and feedback should be taken into account for enhancing performance ability for the double bass.

Phytochemical Profile of Erythrina variegata by Using High-Performance Liquid Chromatography and Gas Chromatography-Mass Spectroscopy Analyses.

Science.gov (United States)

Muthukrishnan, Suriyavathana; Palanisamy, Subha; Subramanian, Senthilkumar; Selvaraj, Sumathi; Mari, Kavitha Rani; Kuppulingam, Ramalingam

2016-08-01

Natural products derived from plant sources have been utilized to treat patients with numerous diseases. The phytochemical constituents present in ethanolic leaf extract of Erythrina variegata (ELEV) were identified by using high-performance liquid chromatography (HPLC) and gas chromatography-mass spectroscopy (GC-MS) analyses. Shade dried leaves were powdered and extracted with ethanol for analyses through HPLC to identify selected flavonoids and through GC-MS to identify other molecules. The HPLC analysis of ELEV showed the presence of gallic and caffeic acids as the major components at concentrations of 2.0 ppm and 0.1 ppm, respectively, as well as other components. GC-MS analysis revealed the presence of 3-eicosyne; 3,7,11,15-tetramethyl-2-hexadecen-1-ol; butanoic acid, 3-methyl-3,7-dimethyl-6-octenyl ester; phytol; 1,2-benzenedicarboxylic acid, diundecyl ester; 1-octanol, 2-butyl-; squalene; and 2H-pyran, 2-(7-heptadecynyloxy) tetrahydro-derivative. Because pharmacopuncture is a new evolving natural mode that uses herbal extracts for treating patients with various ailments with minimum pain and maximum effect, the results of this study are particularly important and show that ELEV possesses a wide range of phytochemical constituents, as indicated above, as effective active principle molecules that can be used individually or in combination to treat patients with various diseases. Copyright © 2016. Published by Elsevier B.V.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation: Functional modules, F9-F11

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This volume consists of the section of the manual dealing with three of the functional modules in the code. Those are the Morse-SGC for the SCALE system, Heating 7.2, and KENO V.a. The manual describes the latest released versions of the codes.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation: Functional modules, F9-F11

International Nuclear Information System (INIS)

1997-03-01

This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This volume consists of the section of the manual dealing with three of the functional modules in the code. Those are the Morse-SGC for the SCALE system, Heating 7.2, and KENO V.a. The manual describes the latest released versions of the codes

RELAP5 analyses of overcooling transients in a pressurized water reactor

International Nuclear Information System (INIS)

Bolander, M.A.; Fletcher, C.D.; Ogden, D.M.; Stitt, B.D.; Waterman, M.E.

1983-01-01

In support of the Pressurized Thermal Shock Integration Study sponsored by the United States Nuclear Regulatory Commission, the Idaho National Engineering Laboratory has performed analyses of overcooling transients using the RELAP5/MOD1.5 computer code. These analyses were performed for Oconee Plants 1 and 3, which are pressurized water reactors of Babcock and Wilcox lowered-loop design. Results of the RELAP5 analyses are presented, including a comparison with plant data. The capabilities and limitations of the RELAP5/MOD1.5 computer code in analyzing integral plant transients are examined. These analyses require detailed thermal-hydraulic and control system computer models

Uncertainty and sensitivity analyses of energy and visual performances of office building with external venetian blind shading in hot-dry climate

International Nuclear Information System (INIS)

Singh, Ramkishore; Lazarus, I.J.; Kishore, V.V.N.

2016-01-01

Highlights: • Various alternatives of glazing and venetian blind were simulated for office space. • Daylighting and energy performances were assessed for each alternative. • Large uncertainties were estimated in the energy consumptions and UDI values. • Glazing design parameters were prioritised by performing sensitivity analysis. • WWR, glazing type, blind orientation and slat angle were identified top in priority. - Abstract: Fenestration has become an integral part of the buildings and has a significant impact on the energy and indoor visual performances. Inappropriate design of the fenestration component may lead to low energy efficiency and visual discomfort as a result of high solar and thermal heat gains, excessive daylight and direct sunlight. External venetian blind has been identified as one of the effective shading devices for controlling the heat gains and daylight through fenestration. This study explores uncertainty and sensitivity analyses to identify and prioritize the most influencing parameters for designing glazed components that include external shading devices for office buildings. The study was performed for hot-dry climate of Jodhpur (Latitude 26° 180′N, longitude 73° 010′E) using EnergyPlus, a whole building energy simulation tool providing a large number of inputs for eight façade orientations. A total 150 and 845 data points (for each orientation) for input variables were generated using Hyper Cubic Sampling and extended FAST methods for uncertainty and sensitivity analyses respectively. Results indicated a large uncertainty in the lighting, HVAC, source energy consumptions and useful daylight illuminance (UDI). The estimated coefficients of variation were highest (up to 106%) for UDI, followed by lighting energy (up to 45%) and HVAC energy use (around 33%). The sensitivity analysis identified window to wall ratio, glazing type, blind type (orientation of slats) and slat angle as highly influencing factors for energy and

Maintenance Plan for the Performance Assessments and Composite Analyses of the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada Test Site

International Nuclear Information System (INIS)

Vefa Yucel

2007-01-01

U.S. Department of Energy (DOE) Manual M 435.1-1 requires that performance assessments (PAs) and composite analyses (CAs) for low-level waste (LLW) disposal facilities be maintained by the field offices. This plan describes the activities performed to maintain the PA and the CA for the Area 3 and Area 5 Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS). This plan supersedes the Maintenance Plan for the Performance Assessments and Composite Analyses for the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada Test Site (DOE/NV/11718--491-REV 1, dated September 2002). The plan is based on U.S. Department of Energy (DOE) Order 435.1 (DOE, 1999a), DOE Manual M 435.1-1 (DOE, 1999b), the DOE M 435.1-1 Implementation Guide DOE G 435.1-1 (DOE, 1999c), and the Maintenance Guide for PAs and CAs (DOE, 1999d). The plan includes a current update on PA/CA documentation, a revised schedule, and a section on Quality Assurance

Exergetic and thermoeconomic analyses of power plants

International Nuclear Information System (INIS)

Kwak, H.-Y.; Kim, D.-J.; Jeon, J.-S.

2003-01-01

Exergetic and thermoeconomic analyses were performed for a 500-MW combined cycle plant. In these analyses, mass and energy conservation laws were applied to each component of the system. Quantitative balances of the exergy and exergetic cost for each component, and for the whole system was carefully considered. The exergoeconomic model, which represented the productive structure of the system considered, was used to visualize the cost formation process and the productive interaction between components. The computer program developed in this study can determine the production costs of power plants, such as gas- and steam-turbines plants and gas-turbine cogeneration plants. The program can be also be used to study plant characteristics, namely, thermodynamic performance and sensitivity to changes in process and/or component design variables

Review of Statistical Analyses Resulting from Performance of HLDWD-DWPF-005

International Nuclear Information System (INIS)

Beck, R.S.

1997-01-01

The Engineering Department at the Defense Waste Processing Facility (DWPF) has reviewed two reports from the Statistical Consulting Section (SCS) involving the statistical analysis of test results for analysis of small sample inserts (references 1 ampersand 2). The test results cover two proposed analytical methods, a room temperature hydrofluoric acid preparation (Cold Chem) and a sodium peroxide/sodium hydroxide fusion modified for insert samples (Modified Fusion). The reports support implementation of the proposed small sample containers and analytical methods at DWPF. Hydragard sampler valve performance was typical of previous results (reference 3). Using an element from each major feed stream. lithium from the frit and iron from the sludge, the sampler was determined to deliver a uniform mixture in either sample container.The lithium to iron ratios were equivalent for the standard 15 ml vial and the 3 ml insert.The proposed method provide equivalent analyses as compared to the current methods. The biases associated with the proposed methods on a vitrified basis are less than 5% for major elements. The sum of oxides for the proposed method compares favorably with the sum of oxides for the conventional methods. However, the average sum of oxides for the Cold Chem method was 94.3% which is below the minimum required recovery of 95%. Both proposed methods, cold Chem and Modified Fusion, will be required at first to provide an accurate analysis which will routinely meet the 95% and 105% average sum of oxides limit for Product Composition Control System (PCCS).Issued to be resolved during phased implementation are as follows: (1) Determine calcine/vitrification factor for radioactive feed; (2) Evaluate covariance matrix change against process operating ranges to determine optimum sample size; (3) Evaluate sources for low sum of oxides; and (4) Improve remote operability of production versions of equipment and instruments for installation in 221-S.The specifics of

Dynamic performance assessment of a residential building-integrated cogeneration system under different boundary conditions. Part II: Environmental and economic analyses

International Nuclear Information System (INIS)

Rosato, Antonio; Sibilio, Sergio; Scorpio, Michelangelo

2014-01-01

Highlights: • A building-integrated micro-cogeneration system was dynamically simulated. • Simulation data were analyzed from both environmental and economic point of views. • The proposed system was compared with a conventional supply system. • The proposed system reduces the environmental impact under heat-led operation. • The proposed system reduces the operating costs whatever the control logic is. - Abstract: This work examines the performance of a residential building-integrated micro-cogeneration system during the winter by means of a whole building simulation software. The cogeneration unit was coupled with a multi-family house composed of three floors, compliant with the transmittance values of both walls and windows suggested by the Italian Law; a stratified combined tank for both heating purposes and domestic hot water production was also used for storing heat. Simulations were performed considering the transient nature of the building and occupant driven loads as well as the part-load characteristics of the cogeneration unit. This system was described in detail and analyzed from an energy point of view in the companion paper. In this paper the simulation results were evaluated in terms of both carbon dioxide equivalent emissions and operating costs; detailed analyses were performed in order to estimate the influence of the most significant boundary conditions on both environmental and economic performance of the proposed system: in particular, three volumes of the hot water storage, four climatic zones corresponding to four Italian cities, two electric demand profiles, as well as two control strategies micro-cogeneration unit were considered. The assessment of environmental impact was performed by using the standard emission factors approach, neglecting the effects of local pollutants. The operating costs due to both natural gas and electric energy consumption were evaluated in detail, whereas both the capital and maintenance costs were

SENSITIVITY ANALYSIS FOR SALTSTONE DISPOSAL UNIT COLUMN DEGRADATION ANALYSES

Energy Technology Data Exchange (ETDEWEB)

Flach, G.

2014-10-28

PORFLOW related analyses supporting a Sensitivity Analysis for Saltstone Disposal Unit (SDU) column degradation were performed. Previous analyses, Flach and Taylor 2014, used a model in which the SDU columns degraded in a piecewise manner from the top and bottom simultaneously. The current analyses employs a model in which all pieces of the column degrade at the same time. Information was extracted from the analyses which may be useful in determining the distribution of Tc-99 in the various SDUs throughout time and in determining flow balances for the SDUs.

BWR spent fuel storage cask performance test. Volume 2. Pre- and post-test decay heat, heat transfer, and shielding analyses

International Nuclear Information System (INIS)

Wiles, L.E.; Lombardo, N.J.; Heeb, C.M.; Jenquin, U.P.; Michener, T.E.; Wheeler, C.L.; Creer, J.M.; McCann, R.A.

1986-06-01

This report describes the decay heat, heat transfer, and shielding analyses conducted in support of performance testing of a Ridhihalgh, Eggers and Associates REA 2033 boiling water reactor (BWR) spent fuel storage cask. The cask testing program was conducted for the US Department of Energy (DOE) Commercial Spent Fuel Management Program by the Pacific Northwest Laboratory (PNL) and by General Electric at the latters' Morris Operation (GE-MO) as reported in Volume I. The analyses effort consisted of performing pretest calculations to (1) select spent fuel for the test; (2) symmetrically load the spent fuel assemblies in the cask to ensure lateral symmetry of decay heat generation rates; (3) optimally locate temperature and dose rate instrumentation in the cask and spent fuel assemblies; and (4) evaluate the ORIGEN2 (decay heat), HYDRA and COBRA-SFS (heat transfer), and QAD and DOT (shielding) computer codes. The emphasis of this second volume is on the comparison of code predictions to experimental test data in support of the code evaluation process. Code evaluations were accomplished by comparing pretest (actually pre-look, since some predictions were not completed until testing was in progress) predictions with experimental cask testing data reported in Volume I. No attempt was made in this study to compare the two heat transfer codes because results of other evaluations have not been completed, and a comparison based on one data set may lead to erroneous conclusions

Performance Testing of Cutting Fluids

DEFF Research Database (Denmark)

Belluco, Walter

The importance of cutting fluid performance testing has increased with documentation requirements of new cutting fluid formulations based on more sustainable products, as well as cutting with minimum quantity of lubrication and dry cutting. Two sub-problems have to be solved: i) which machining...... tests feature repeatability, reproducibility and sensitivity to cutting fluids, and ii) to what extent results of one test ensure relevance to a wider set of machining situations. The present work is aimed at assessing the range of validity of the different testing methods, investigating correlation...... within the whole range of operations, materials, cutting fluids, operating conditions, etc. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping, and with respect to tool life, cutting forces, chip formation and product quality (dimensional accuracy and surface integrity...

Medical Isotope Production Analyses In KIPT Neutron Source Facility

International Nuclear Information System (INIS)

Talamo, Alberto; Gohar, Yousry

2016-01-01

Medical isotope production analyses in Kharkov Institute of Physics and Technology (KIPT) neutron source facility were performed to include the details of the irradiation cassette and the self-shielding effect. An updated detailed model of the facility was used for the analyses. The facility consists of an accelerator-driven system (ADS), which has a subcritical assembly using low-enriched uranium fuel elements with a beryllium-graphite reflector. The beryllium assemblies of the reflector have the same outer geometry as the fuel elements, which permits loading the subcritical assembly with different number of fuel elements without impacting the reflector performance. The subcritical assembly is driven by an external neutron source generated from the interaction of 100-kW electron beam with a tungsten target. The facility construction was completed at the end of 2015, and it is planned to start the operation during the year of 2016. It is the first ADS in the world, which has a coolant system for removing the generated fission power. Argonne National Laboratory has developed the design concept and performed extensive design analyses for the facility including its utilization for the production of different radioactive medical isotopes. 99 Mo is the parent isotope of 99m Tc, which is the most commonly used medical radioactive isotope. Detailed analyses were performed to define the optimal sample irradiation location and the generated activity, for several radioactive medical isotopes, as a function of the irradiation time.

Medical Isotope Production Analyses In KIPT Neutron Source Facility

Energy Technology Data Exchange (ETDEWEB)

Talamo, Alberto [Argonne National Lab. (ANL), Argonne, IL (United States); Gohar, Yousry [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-01-01

Medical isotope production analyses in Kharkov Institute of Physics and Technology (KIPT) neutron source facility were performed to include the details of the irradiation cassette and the self-shielding effect. An updated detailed model of the facility was used for the analyses. The facility consists of an accelerator-driven system (ADS), which has a subcritical assembly using low-enriched uranium fuel elements with a beryllium-graphite reflector. The beryllium assemblies of the reflector have the same outer geometry as the fuel elements, which permits loading the subcritical assembly with different number of fuel elements without impacting the reflector performance. The subcritical assembly is driven by an external neutron source generated from the interaction of 100-kW electron beam with a tungsten target. The facility construction was completed at the end of 2015, and it is planned to start the operation during the year of 2016. It is the first ADS in the world, which has a coolant system for removing the generated fission power. Argonne National Laboratory has developed the design concept and performed extensive design analyses for the facility including its utilization for the production of different radioactive medical isotopes. ⁹⁹Mo is the parent isotope of ^99mTc, which is the most commonly used medical radioactive isotope. Detailed analyses were performed to define the optimal sample irradiation location and the generated activity, for several radioactive medical isotopes, as a function of the irradiation time.

Validating Future Force Performance Measures (Army Class): Concluding Analyses

Science.gov (United States)

2016-06-01

32 Table 3.10. Descriptive Statistics and Intercorrelations for LV Final Predictor Factor Scores...55 Table 4.7. Descriptive Statistics for Analysis Criteria...Soldier attrition and performance: Dependability (Non- Delinquency ), Adjustment, Physical Conditioning, Leadership, Work Orientation, and Agreeableness

MendelianRandomization: an R package for performing Mendelian randomization analyses using summarized data.

Science.gov (United States)

Yavorska, Olena O; Burgess, Stephen

2017-12-01

MendelianRandomization is a software package for the R open-source software environment that performs Mendelian randomization analyses using summarized data. The core functionality is to implement the inverse-variance weighted, MR-Egger and weighted median methods for multiple genetic variants. Several options are available to the user, such as the use of robust regression, fixed- or random-effects models and the penalization of weights for genetic variants with heterogeneous causal estimates. Extensions to these methods, such as allowing for variants to be correlated, can be chosen if appropriate. Graphical commands allow summarized data to be displayed in an interactive graph, or the plotting of causal estimates from multiple methods, for comparison. Although the main method of data entry is directly by the user, there is also an option for allowing summarized data to be incorporated from the PhenoScanner database of genotype-phenotype associations. We hope to develop this feature in future versions of the package. The R software environment is available for download from [https://www.r-project.org/]. The MendelianRandomization package can be downloaded from the Comprehensive R Archive Network (CRAN) within R, or directly from [https://cran.r-project.org/web/packages/MendelianRandomization/]. Both R and the MendelianRandomization package are released under GNU General Public Licenses (GPL-2|GPL-3). © The Author 2017. Published by Oxford University Press on behalf of the International Epidemiological Association.

USE OF BOUNDING ANALYSES TO ESTIMATE THE PREFORMANCE OF A SEISMICALLY ISOLATED STRUCTURE

Directory of Open Access Journals (Sweden)

Gökhan ÖZDEMİR

2017-03-01

Full Text Available Current design approach for seismic isolated structures is to perform bounding analyses. These analyses provide an envelope for the response of the seismic isolated structure rather than focusing on the actual performance. In this study, the success of bounding analyses to estimate performance of a seismic isolated structure, in which the isolation is provided by means of lead rubber bearings (LRBs, is evaluated in a comparative manner. For this purpose, nonlinear response history analyses were performed under the effect of bidirectional ground motion excitations. In bounding analyses, non-deteriorating hysteretic representations were used to model the hysteretic behavior of LRBs. On the other hand, to estimate the actual performance of both the superstructure and isolator units, deteriorating hysteretic idealizations were employed. The deterioration in strength of LRBs was defined as a function of temperature rise in the lead core. The analyzed structure is an existing seismically isolated hospital building and analytically modeled in accordance with its reported design properties for both isolation units and superstructure. Results obtained from analyses where LRBs are idealized by both deteriorating and non-deteriorating hysteretic representations are used in the comparisons. The response quantities used in the comparisons are maximum isolator displacement, maximum isolator force, maximum absolute floor acceleration, and maximum relative story displacements. In an average sense, bounding analyses is found to provide conservative estimates for the selected response quantities and fulfills its intended purpose. However, it is revealed that there may be individual cases where bounding analyses fails to provide a safe envelope.

Kinetic stability analyses in a bumpy cylinder

International Nuclear Information System (INIS)

Dominguez, R.R.; Berk, H.L.

1981-01-01

Recent interest in the ELMO Bumpy Torus (EBT) has prompted a number of stability analyses of both the hot electron rings and the toroidal plasma. Typically these works employ the local approximation, neglecting radial eigenmode structure and ballooning effects to perform the stability analysis. In the present work we develop a fully kinetic formalism for performing nonlocal stability analyses in a bumpy cylinder. We show that the Vlasov-Maxwell integral equations (with one ignorable coordinate) are self-adjoint and hence amenable to analysis using numerical techniques developed for self-adjoint systems of equations. The representation we obtain for the kernel of the Vlasov-Maxwell equations is a differential operator of arbitrarily high order. This form leads to a manifestly self-adjoint system of differential equations for long wavelength modes

DCH analyses using the CONTAIN code

International Nuclear Information System (INIS)

Hong, Sung Wan; Kim, Hee Dong

1996-08-01

This report describes CONTAIN analyses performed during participation in the project of 'DCH issue resolution for ice condenser plants' which is sponsored by NRC at SNL. Even though the calculations were performed for the Ice Condenser plant, CONTAIN code has been used for analyses of many phenomena in the PWR containment and the DCH module can be commonly applied to any plant types. The present ice condenser issue resolution effort intended to provide guidance as to what might be needed to resolve DCH for ice condenser plants. It includes both a screening analysis and a scoping study if the screening analysis cannot provide an complete resolution. The followings are the results concerning DCH loads in descending order. 1. Availability of ignition sources prior to vessel breach 2. availability and effectiveness of ice in the ice condenser 3. Loads modeling uncertainties related to co-ejected RPV water 4. Other loads modeling uncertainties 10 tabs., 3 figs., 14 refs. (Author)

DCH analyses using the CONTAIN code

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Wan; Kim, Hee Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-08-01

This report describes CONTAIN analyses performed during participation in the project of `DCH issue resolution for ice condenser plants` which is sponsored by NRC at SNL. Even though the calculations were performed for the Ice Condenser plant, CONTAIN code has been used for analyses of many phenomena in the PWR containment and the DCH module can be commonly applied to any plant types. The present ice condenser issue resolution effort intended to provide guidance as to what might be needed to resolve DCH for ice condenser plants. It includes both a screening analysis and a scoping study if the screening analysis cannot provide an complete resolution. The followings are the results concerning DCH loads in descending order. 1. Availability of ignition sources prior to vessel breach 2. availability and effectiveness of ice in the ice condenser 3. Loads modeling uncertainties related to co-ejected RPV water 4. Other loads modeling uncertainties 10 tabs., 3 figs., 14 refs. (Author).

Action and familiarity effects on self and other expert musicians’ Laban effort-shape analyses of expressive bodily behaviors in instrumental music performance: a case study approach

Science.gov (United States)

Broughton, Mary C.; Davidson, Jane W.

2014-01-01

Self-reflective performance review and expert evaluation are features of Western music performance practice. While music is usually the focus, visual information provided by performing musicians’ expressive bodily behaviors communicates expressiveness to musically trained and untrained observers. Yet, within a seemingly homogenous group, such as one of musically trained individuals, diversity of experience exists. Individual differences potentially affect perception of the subtleties of expressive performance, and performers’ effective communication of their expressive intentions. This study aimed to compare self- and other expert musicians’ perception of expressive bodily behaviors observed in marimba performance. We hypothesized that analyses of expressive bodily behaviors differ between expert musicians according to their specialist motor expertise and familiarity with the music. Two professional percussionists and experienced marimba players, and one professional classical singer took part in the study. Participants independently conducted Laban effort-shape analysis – proposing that intentions manifest in bodily activity are understood through shared embodied processes – of a marimbists’ expressive bodily behaviors in an audio-visual performance recording. For one percussionist, this was a self-reflective analysis. The work was unfamiliar to the other percussionist and singer. Perception of the performer’s expressive bodily behaviors appeared to differ according to participants’ individual instrumental or vocal motor expertise, and familiarity with the music. Furthermore, individual type of motor experience appeared to direct participants’ attention in approaching the analyses. Findings support forward and inverse perception–action models, and embodied cognitive theory. Implications offer scientific rigor and artistic interest for how performance practitioners can reflectively analyze performance to improve expressive communication. PMID

Action and familiarity effects on self and other expert musicians’ Laban effort-shape analyses of expressive bodily behaviors in instrumental music performance: A case study approach

Directory of Open Access Journals (Sweden)

Mary C Broughton

2014-10-01

Full Text Available Self-reflective performance review and expert evaluation are features of Western music performance practice. While music is usually the focus, visual information provided by performing musicians’ expressive bodily behaviors communicates expressiveness to musically trained and untrained observers. Yet, within a seemingly homogenous group such as one of musically trained individuals, diversity of experience exists. Individual differences potentially affect perception of the subtleties of expressive performance, and performers’ effective communication of their expressive intentions. This study aimed to compare self- and other expert musicians’ perception of expressive bodily behaviors observed in marimba performance. We hypothesised that analyses of expressive expressive bodily behaviors differ between expert musicians according to their specialist motor expertise and familiarity with the music. Two professional percussionists and experienced marimba players, and one professional classical singer took part in the study. Participants independently conducted Laban effort-shape analysis – proposing that intentions manifest in bodily activity are understood through shared embodied processes – of a marimbists’ expressive bodily behaviors in an audio-visual performance recording. For one percussionist, this was a self-reflective analysis. The work was unfamiliar to the other percussionist and singer. Perception of the performer’s expressive bodily behaviors differed according to participants’ individual instrumental or vocal motor expertise, and familiarity with the music. Furthermore, individual type of motor experience appeared to direct participants’ attention in approaching the analyses. Findings support forward and inverse perception-action models, and embodied cognitive theory. Implications offer scientific rigour and artistic interest for how performance practitioners can reflectively analyze performance to improve expressive

Analyse des caractéristiques structurelles et des performances ...

African Journals Online (AJOL)

SARAH

28 févr. 2014 ... performances technico-économiques de la riziculture irriguée en Côte d' .... en nous basant sur les prix des intrants et des produits en vigueur au cours ..... la recherche et de la vulgarisation et le transfert de technologies ; (2) ...

Exergoeconomic and environmental analyses of CO

NARCIS (Netherlands)

Mosaffa, A. H.; Garousi Farshi, L; Infante Ferreira, C.A.; Rosen, M. A.

2016-01-01

Exergoeconomic and environmental analyses are presented for two CO₂/NH₃ cascade refrigeration systems equipped with (1) two flash tanks and (2) a flash tank along with a flash intercooler with indirect subcooler. A comparative study is performed for the proposed systems, and

One size does not fit all: On how Markov model order dictates performance of genomic sequence analyses

Science.gov (United States)

Narlikar, Leelavati; Mehta, Nidhi; Galande, Sanjeev; Arjunwadkar, Mihir

2013-01-01

The structural simplicity and ability to capture serial correlations make Markov models a popular modeling choice in several genomic analyses, such as identification of motifs, genes and regulatory elements. A critical, yet relatively unexplored, issue is the determination of the order of the Markov model. Most biological applications use a predetermined order for all data sets indiscriminately. Here, we show the vast variation in the performance of such applications with the order. To identify the ‘optimal’ order, we investigated two model selection criteria: Akaike information criterion and Bayesian information criterion (BIC). The BIC optimal order delivers the best performance for mammalian phylogeny reconstruction and motif discovery. Importantly, this order is different from orders typically used by many tools, suggesting that a simple additional step determining this order can significantly improve results. Further, we describe a novel classification approach based on BIC optimal Markov models to predict functionality of tissue-specific promoters. Our classifier discriminates between promoters active across 12 different tissues with remarkable accuracy, yielding 3 times the precision expected by chance. Application to the metagenomics problem of identifying the taxum from a short DNA fragment yields accuracies at least as high as the more complex mainstream methodologies, while retaining conceptual and computational simplicity. PMID:23267010

Impact of emotional intelligence on job performance

Directory of Open Access Journals (Sweden)

Marjanca Krajnc

2012-06-01

Full Text Available RQ: To determine whether emotional intelligence has an impact on motivation and how this can affect work performance.Purpose: High work performance of individuals in an organization can be achieved with a high level of motivation that is directly derived from emotional intelligence. Because the impact of emotional intelligence in organizations is under-researched and is not sufficiently included in the scope of management, there is a need tofurther explore this topic.Method: Qualitative analysis in the form of interviews and quantitative analysis in the form of a survey was used in this study. Details of interviews with employees were analyzed according to the rules of qualitative methods. The data obtained in the survey were analyzed with a chi-square test.Results: The results showed that emotional intelligence has a significant impact on motivation and that emotionally motivated person works more and better.Organization: Management can take these research findings into consideration during the human resources management process, and in the procedures of a comprehensive development of individual’s personal potential. The result of the research findings can be used bymanagement, supervisors, and all employees as a method to establish better motivational climate.Society: With a similar, but wider purpose, the findings of this research can be taken into account in the wider social environment, particularly in the field of public administration and media.Originality: In Slovenian organizations, research on this topic and in this combination has not yet been performed.Limitations: The sample is small and limited to only one major successful Slovenian company. It takes into account only the influence of motivation that comes from emotional intelligence.

Post-facta Analyses of Fukushima Accident and Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Tanabe, Fumiya [Sociotechnical Systems Safety Research Institute, Ichige (Japan)

2014-08-15

Independent analyses have been performed of the core melt behavior of the Unit 1, Unit 2 and Unit 3 reactors of Fukushima Daiichi Nuclear Power Station on 11-15 March 2011. The analyses are based on a phenomenological methodology with measured data investigation and a simple physical model calculation. Estimated are time variation of core water level, core material temperature and hydrogen generation rate. The analyses have revealed characteristics of accident process of each reactor. In the case of Unit 2 reactor, the calculated result suggests little hydrogen generation because of no steam generation in the core for zirconium-steam reaction during fuel damage process. It could be the reason of no hydrogen explosion in the Unit 2 reactor building. Analyses have been performed also on the core material behavior in another chaotic period of 19-31 March 2011, and it resulted in a re-melt hypothesis that core material in each reactor should have melted again due to shortage of cooling water. The hypothesis is consistent with many observed features of radioactive materials dispersion into the environment.

Sensorisk analyse i relation til markedsorientret produktudvikling af fødevarer

DEFF Research Database (Denmark)

Bech, Anne C.; Juhl, Hans Jørn; Kristensen, Kai

1995-01-01

as follows: "From a scientific/technical point of view there is a need for complete knowledge of the sensory qualities of a product and for a wider understanding of the ultimate consumer in relation to prod acceptance, product optimisation and product satisfaction." This wide formulation of the aim thus...... are influenced by the processes and ingredients used which again are process dependent. On the consumer side product requirements are also influenced by a number of factors. Last but not least it is important to realize that the process is a dynamic one. Consumers develop other or new demands just as new...... that the aim of sensory analysis is determined before choosing the method. In general three categories of sensory analysis methods are used, namely the discriminant test, the descriptive test and the affective test. 3. Discriminant tests are usually performed with a trained panel and with the purpose...

Development of a model performance-based sign sheeting specification based on the evaluation of nighttime traffic signs using legibility and eye-tracker data : data and analyses.

Science.gov (United States)

2010-09-01

This report presents data and technical analyses for Texas Department of Transportation Project 0-5235. This : project focused on the evaluation of traffic sign sheeting performance in terms of meeting the nighttime : driver needs. The goal was to de...

Quo vadis: Hydrologic inverse analyses using high-performance computing and a D-Wave quantum annealer

Science.gov (United States)

O'Malley, D.; Vesselinov, V. V.

2017-12-01

Classical microprocessors have had a dramatic impact on hydrology for decades, due largely to the exponential growth in computing power predicted by Moore's law. However, this growth is not expected to continue indefinitely and has already begun to slow. Quantum computing is an emerging alternative to classical microprocessors. Here, we demonstrated cutting edge inverse model analyses utilizing some of the best available resources in both worlds: high-performance classical computing and a D-Wave quantum annealer. The classical high-performance computing resources are utilized to build an advanced numerical model that assimilates data from O(10^5) observations, including water levels, drawdowns, and contaminant concentrations. The developed model accurately reproduces the hydrologic conditions at a Los Alamos National Laboratory contamination site, and can be leveraged to inform decision-making about site remediation. We demonstrate the use of a D-Wave 2X quantum annealer to solve hydrologic inverse problems. This work can be seen as an early step in quantum-computational hydrology. We compare and contrast our results with an early inverse approach in classical-computational hydrology that is comparable to the approach we use with quantum annealing. Our results show that quantum annealing can be useful for identifying regions of high and low permeability within an aquifer. While the problems we consider are small-scale compared to the problems that can be solved with modern classical computers, they are large compared to the problems that could be solved with early classical CPUs. Further, the binary nature of the high/low permeability problem makes it well-suited to quantum annealing, but challenging for classical computers.

Biomass feedstock analyses

Energy Technology Data Exchange (ETDEWEB)

Wilen, C.; Moilanen, A.; Kurkela, E. [VTT Energy, Espoo (Finland). Energy Production Technologies

1996-12-31

The overall objectives of the project `Feasibility of electricity production from biomass by pressurized gasification systems` within the EC Research Programme JOULE II were to evaluate the potential of advanced power production systems based on biomass gasification and to study the technical and economic feasibility of these new processes with different type of biomass feed stocks. This report was prepared as part of this R and D project. The objectives of this task were to perform fuel analyses of potential woody and herbaceous biomasses with specific regard to the gasification properties of the selected feed stocks. The analyses of 15 Scandinavian and European biomass feed stock included density, proximate and ultimate analyses, trace compounds, ash composition and fusion behaviour in oxidizing and reducing atmospheres. The wood-derived fuels, such as whole-tree chips, forest residues, bark and to some extent willow, can be expected to have good gasification properties. Difficulties caused by ash fusion and sintering in straw combustion and gasification are generally known. The ash and alkali metal contents of the European biomasses harvested in Italy resembled those of the Nordic straws, and it is expected that they behave to a great extent as straw in gasification. Any direct relation between the ash fusion behavior (determined according to the standard method) and, for instance, the alkali metal content was not found in the laboratory determinations. A more profound characterisation of the fuels would require gasification experiments in a thermobalance and a PDU (Process development Unit) rig. (orig.) (10 refs.)

Qualitative and quantitative analyses of flavonoids in Spirodela polyrrhiza by high-performance liquid chromatography coupled with mass spectrometry.

Science.gov (United States)

Qiao, Xue; He, Wen-ni; Xiang, Cheng; Han, Jian; Wu, Li-jun; Guo, De-an; Ye, Min

2011-01-01

Spirodela polyrrhiza (L.) Schleid. is a traditional Chinese herbal medicine for the treatment of influenza. Despite its wide use in Chinese medicine, no report on quality control of this herb is available so far. To establish qualitative and quantitative analytical methods by high-performance liquid chromatography (HPLC) coupled with mass spectrometry (MS) for the quality control of S. polyrrhiza. The methanol extract of S. polyrrhiza was analysed by HPLC/ESI-MS(n). Flavonoids were identified by comparing with reference standards or according to their MS(n) (n = 2-4) fragmentation behaviours. Based on LC/MS data, a standardised HPLC fingerprint was established by analysing 15 batches of commercial herbal samples. Furthermore, quantitative analysis was conducted by determining five major flavonoids, namely luteolin 8-C-glucoside, apigenin 8-C-glucoside, luteolin 7-O-glucoside, apigenin 7-O-glucoside and luteolin. A total of 18 flavonoids were identified by LC/MS, and 14 of them were reported from this herb for the first time. The HPLC fingerprints contained 10 common peaks, and could differentiate good quality batches from counterfeits. The total contents of five major flavonoids in S. polyrrhiza varied significantly from 4.28 to 19.87 mg/g. Qualitative LC/MS and quantitative HPLC analytical methods were established for the comprehensive quality control of S. polyrrhiza. Copyright © 2011 John Wiley & Sons, Ltd.

Hydrogen-combustion analyses of large-scale tests

International Nuclear Information System (INIS)

Gido, R.G.; Koestel, A.

1986-01-01

This report uses results of the large-scale tests with turbulence performed by the Electric Power Research Institute at the Nevada Test Site to evaluate hydrogen burn-analysis procedures based on lumped-parameter codes like COMPARE-H2 and associated burn-parameter models. The test results: (1) confirmed, in a general way, the procedures for application to pulsed burning, (2) increased significantly our understanding of the burn phenomenon by demonstrating that continuous burning can occur, and (3) indicated that steam can terminate continuous burning. Future actions recommended include: (1) modification of the code to perform continuous-burn analyses, which is demonstrated, (2) analyses to determine the type of burning (pulsed or continuous) that will exist in nuclear containments and the stable location if the burning is continuous, and (3) changes to the models for estimating burn parameters

Hydrogen-combustion analyses of large-scale tests

International Nuclear Information System (INIS)

Gido, R.G.; Koestel, A.

1986-01-01

This report uses results of the large-scale tests with turbulence performed by the Electric Power Research Institute at the Nevada Test Site to evaluate hydrogen burn-analysis procedures based on lumped-parameter codes like COMPARE-H2 and associated burn-parameter models. The test results (a) confirmed, in a general way, the procedures for application to pulsed burning, (b) increased significantly our understanding of the burn phenomenon by demonstrating that continuous burning can occur and (c) indicated that steam can terminate continuous burning. Future actions recommended include (a) modification of the code to perform continuous-burn analyses, which is demonstrated, (b) analyses to determine the type of burning (pulsed or continuous) that will exist in nuclear containments and the stable location if the burning is continuous, and (c) changes to the models for estimating burn parameters

Engaging the expert in public dialogue: Developing the role of performance assessment

International Nuclear Information System (INIS)

Littleboy, Anna; Hodgkinson, David

2001-01-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development

Engaging the expert in public dialogue: Developing the role of performance assessment

Energy Technology Data Exchange (ETDEWEB)

Littleboy, Anna [United Kingdom Nirex Ltd., Harwell (United Kingdom); Hodgkinson, David [Quintessa Ltd., Henley-on-Thames (United Kingdom)

2001-07-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development.

Performance Analyses of Renewable and Fuel Power Supply Systems for Different Base Station Sites

Directory of Open Access Journals (Sweden)

Josip Lorincz

2014-11-01

Full Text Available Base station sites (BSSs powered with renewable energy sources have gained the attention of cellular operators during the last few years. This is because such “green” BSSs impose significant reductions in the operational expenditures (OPEX of telecom operators due to the possibility of on-site renewable energy harvesting. In this paper, the green BSSs power supply system parameters detected through remote and centralized real time sensing are presented. An implemented sensing system based on a wireless sensor network enables reliable collection and post-processing analyses of many parameters, such as: total charging/discharging current of power supply system, battery voltage and temperature, wind speed, etc. As an example, yearly sensing results for three different BSS configurations powered by solar and/or wind energy are discussed in terms of renewable energy supply (RES system performance. In the case of powering those BSS with standalone systems based on a fuel generator, the fuel consumption models expressing interdependence among the generator load and fuel consumption are proposed. This has allowed energy-efficiency comparison of the fuel powered and RES systems, which is presented in terms of the OPEX and carbon dioxide (CO2 reductions. Additionally, approaches based on different BSS air-conditioning systems and the on/off regulation of a daily fuel generator activity are proposed and validated in terms of energy and capital expenditure (CAPEX savings.

Low carbon technology performance vs infrastructure vulnerability: analysis through the local and global properties space.

Science.gov (United States)

Dawson, David A; Purnell, Phil; Roelich, Katy; Busch, Jonathan; Steinberger, Julia K

2014-11-04

Renewable energy technologies, necessary for low-carbon infrastructure networks, are being adopted to help reduce fossil fuel dependence and meet carbon mitigation targets. The evolution of these technologies has progressed based on the enhancement of technology-specific performance criteria, without explicitly considering the wider system (global) impacts. This paper presents a methodology for simultaneously assessing local (technology) and global (infrastructure) performance, allowing key technological interventions to be evaluated with respect to their effect on the vulnerability of wider infrastructure systems. We use exposure of low carbon infrastructure to critical material supply disruption (criticality) to demonstrate the methodology. A series of local performance changes are analyzed; and by extension of this approach, a method for assessing the combined criticality of multiple materials for one specific technology is proposed. Via a case study of wind turbines at both the material (magnets) and technology (turbine generators) levels, we demonstrate that analysis of a given intervention at different levels can lead to differing conclusions regarding the effect on vulnerability. Infrastructure design decisions should take a systemic approach; without these multilevel considerations, strategic goals aimed to help meet low-carbon targets, that is, through long-term infrastructure transitions, could be significantly jeopardized.

MELCOR 1.8.2 Analyses in Support of ITER's RPrS

International Nuclear Information System (INIS)

Brad J Merrill

2008-01-01

The International Thermonuclear Experimental Reactor (ITER) Program is performing accident analyses for ITER's 'Rapport Preliminaire de Surete' (Report Preliminary on Safety - RPrS) with a modified version of the MELCOR 1.8.2 code. The RPrS is an ITER safety document required in the ITER licensing process to obtain a 'Decret Autorisation de Construction' (a Decree Authorizing Construction - DAC) for the ITER device. This report documents the accident analyses performed by the US with the MELCOR 1.8.2 code in support of the ITER RPrS effort. This work was funded through an ITER Task Agreement for MELCOR Quality Assurance and Safety Analyses. Under this agreement, the US was tasked with performing analyses for three accident scenarios in the ITER facility. Contained within the text of this report are discussions that identify the cause of these accidents, descriptions of how these accidents are likely to proceed, the method used to analyze the consequences of these accidents, and discussions of the transient thermal hydraulic and radiological release results for these accidents

Performance analyses of Elmo Bumpy Torus plasmas and plasma support systems

International Nuclear Information System (INIS)

Fenstermacher, M.E.

1979-01-01

The development and applcation of the OASIS Code (Operational Analysis of ELMO Bumpy Torus Support and Ignition Systems) for the study of EBT device and plasma performance are presented. The code performs a time-independent, zero-dimensional self-consistent calculation of plasma and plasmasupport systems parameters for the physics and engineering of EBT devices. The features of OASIS modeling for the EBT plasma include: (1) particle balance of the bulk toroidal and electron ring plasma components for experimental (H-H, D-D, He-He etc.) as well as reactor (D-T) devices; (2) energy balance in the bulk and ring plasmas for externally heated or ignition devices; (3) alpha particle effects for reactor devices; (4) auxiliary heating effects, including microwave (ECRH), RF heating (e.g., ICRH), and neutral beam methods; and (5) ignition conditions, including fusion power, alpha power and neutron wall loading. The performance studies using OASIS focussed on variation in plasma and device size and on microwave input power and frequency. An additional study was performed to determine the characteristics of an EBT reactor proof-of-principle device operated with a deuterium-tritium plasma. Sensitivity studies were performed for variation in the input microwave power sharing fractions and the dependence of the bulk n tau scaling law on bulk electron temperature

Nuclear Analyses of Indian LLCB Test Blanket System in ITER

Science.gov (United States)

Swami, H. L.; Shaw, A. K.; Danani, C.; Chaudhuri, Paritosh

2017-04-01

Heading towards the Nuclear Fusion Reactor Program, India is developing Lead Lithium Ceramic Breeder (LLCB) tritium breeding blanket for its future fusion Reactor. A mock-up of the LLCB blanket is proposed to be tested in ITER equatorial port no.2, to ensure the overall performance of blanket in reactor relevant nuclear fusion environment. Nuclear analyses play an important role in LLCB Test Blanket System design & development. It is required for tritium breeding estimation, thermal-hydraulic design, coolants process design, radioactive waste management, equipment maintenance & replacement strategies and nuclear safety. The nuclear behaviour of LLCB test blanket module in ITER is predicated in terms of nuclear responses such as tritium production, nuclear heating, neutron fluxes and radiation damages. Radiation shielding capability of LLCB TBS inside and outside bio-shield was also assessed to fulfill ITER shielding requirements. In order to supports the rad-waste and safety assessment, nuclear activation analyses were carried out and radioactivity data were generated for LLCB TBS components. Nuclear analyses of LLCB TBS are performed using ITER recommended nuclear analyses codes (i.e. MCNP, EASY), nuclear cross section data libraries (i.e. FENDL 2.1, EAF) and neutronic model (ITER C-lite v.l). The paper describes a comprehensive nuclear performance of LLCB TBS in ITER.

PCA-based algorithm for calibration of spectrophotometric analysers of food

International Nuclear Information System (INIS)

Morawski, Roman Z; Miekina, Andrzej

2013-01-01

Spectrophotometric analysers of food, being instruments for determination of the composition of food products and ingredients, are today of growing importance for food industry, as well as for food distributors and consumers. Their metrological performance significantly depends of the numerical performance of available means for spectrophotometric data processing; in particular – the means for calibration of analysers. In this paper, a new algorithm for this purpose is proposed, viz. the algorithm using principal components analysis (PCA). It is almost as efficient as PLS-based algorithms of calibration, but much simpler

Sectorial Group for Incident Analyses (GSAI)

International Nuclear Information System (INIS)

Galles, Q.; Gamo, J. M.; Jorda, M.; Sanchez-Garrido, P.; Lopez, F.; Asensio, L.; Reig, J.

2013-01-01

In 2008, the UNESA Nuclear Energy Committee (CEN) proposed the creation of a working group formed by experts from all Spanish NPPs with the purpose of jointly analyze relevant incidents occurred in each one of the plants. This initiative was a response to a historical situation in which the exchange of information on incidents between the Spanish NPP's was below the desired level. In june 2009, UNESA's Guide CEN-29 established the performance criteria for the so called Sectorial Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group of Operating Experience, under the Operations Commission (COP). (Author)

ADAPTER: Analysing and developing adaptability and performance in teams to enhance resilience

International Nuclear Information System (INIS)

Beek, Dolf van der; Schraagen, Jan Maarten

2015-01-01

In the current study, the concept of team resilience was operationalized by developing a first version of a questionnaire (ADAPTER) driven by the four essential abilities of resilience (Hollnagel E, 2011, Resilience engineering in practice: a guidebook, p. 275–96) and expanded with more relation-oriented abilities of leadership and cooperation. The development and administration of ADAPTER took place within two companies. Factor analyses using data of 91 participants largely supported the hypothesized 6-dimension taxonomy. Support was found for Team responding behavior, Shared Leadership and Cooperation with other teams/departments. Anticipation showed considerable overlap with the monitoring scale, possibly due to the fact that monitoring items dealt with prospective situations. Using ADAPTER questionnaire results as a starting point for further in-depth discussion among the different teams in the pilot companies proved very useful. Suggestions for future research include contextualizing the questionnaire by embedding it in actual cases or having it filled in after specific incidents. Also, support of organization should be included as a separate dimension in ADAPTER. - Highlights: • Development of a team resilience questionnaire (ADAPTER). • Driven by Hollnagel's resilience abilities plus shared leadership and cooperation. • Pilot testing of ADAPTER took place within two companies. • Factor analyses (N=91) largely supported the hypothesized 6-dimension taxonomy. • Results provide a useful starting point for further in-depth discussions

Wieder, wider, weiden: casos de parodia y autoparodia en la narrativa Roberto Bolaño

Directory of Open Access Journals (Sweden)

Felipe Adrián Ríos Baeza

2014-07-01

Full Text Available Si bien el término parodia ha sido estudiado y signado como un género perdido de la antigüedad, la literatura contemporánea lo vuelve un procedimiento creativo gracias a una de sus aristas más interesantes: la de reiterar. En una novela determinante para su proyecto literario global, Estrella distante (1996, el chileno Roberto Bolaño (1953-2003 parece estar cifrando su obra con esta clave. Es decir, la mencionada novela no sólo estaría contado, en términos textuales, la historia de un piloto de la Fuerza Aérea Chilena llamado Carlos Wieder que, a un tiempo, es un artista y un asesino; sino que en términos transtextuales, y según la explicación de Bibiano O’Ryan (uno de los personajes, el apellido Wieder estaría asociado a una cierta recurrencia en la literatura de Bolaño: la de la parodia como eje mismo, que es simultáneamente burla y reiteración. Wieder, wider, weiden: decir de nuevo, en contra y de manera perversa. La asociación fonética es, asimismo, asociación creativa. Para Bolaño, el espacio de la parodia le permite reiterar, refutar y pervertir ciertos actos que acometen sus personajes, todos ellos ubicados en una suerte de “eterno retorno” que los hace, una y otra vez, asesinar, escribir, hacer el amor, leer, hablar, pensar. Se propone aquí, una hipótesis a comprobar: sólo en el volver a contar, en la repetición de un texto en otro contexto, en la parodia es como realmente se pueden apreciar los énfasis y subrayados que Bolaño desea hacer notorios en su propuesta literaria. Even though the term parody has been studied and identified as a lost genre from older times, contemporary literature has turned it into a creative procedure thanks to one of its most interesting facets: reiteration. In a determinant novel for his global literary project: Estrella distante (1996, the Chilean writer Roberto Bolaño (1953-2003 seems to encode his work in this key. In other words, the novel would not only narrate, in

Model-based performance and energy analyses of reverse osmosis to reuse wastewater in a PVC production site.

Science.gov (United States)

Hu, Kang; Fiedler, Thorsten; Blanco, Laura; Geissen, Sven-Uwe; Zander, Simon; Prieto, David; Blanco, Angeles; Negro, Carlos; Swinnen, Nathalie

2017-11-10

A pilot-scale reverse osmosis (RO) followed behind a membrane bioreactor (MBR) was developed for the desalination to reuse wastewater in a PVC production site. The solution-diffusion-film model (SDFM) based on the solution-diffusion model (SDM) and the film theory was proposed to describe rejections of electrolyte mixtures in the MBR effluent which consists of dominant ions (Na + and Cl - ) and several trace ions (Ca 2+ , Mg 2+ , K + and SO 4 2- ). The universal global optimisation method was used to estimate the ion permeability coefficients (B) and mass transfer coefficients (K) in SDFM. Then, the membrane performance was evaluated based on the estimated parameters which demonstrated that the theoretical simulations were in line with the experimental results for the dominant ions. Moreover, an energy analysis model with the consideration of limitation imposed by the thermodynamic restriction was proposed to analyse the specific energy consumption of the pilot-scale RO system in various scenarios.

Continental Subduction: Mass Fluxes and Interactions with the Wider Earth System

Science.gov (United States)

Cuthbert, S. J.

2011-12-01

Substantial parts of ultra-high pressure (UHP) terrains probably represent subducted passive continental margins (PCM). This contribution reviews and synthesises research on processes operating in such systems and their implication for the wider Earth system. PCM sediments are large repositories of volatiles including hydrates, nitrogen species, carbonates and hydrocarbons. Sediments and upper/ mid-crustal basement are rich in incompatible elements and are fertile for melting. Lower crust may be more mafic and refractory. Juvenile rift-related mafic rocks also have the potential to generate substantial volumes of granitoid melts, especially if they have been hydrated. Exposed UHP terrains demonstrate the return of continental crust from mantle depths, show evidence for substantial fluxes of aqueous fluid, anatexis and, in entrained orogenic peridotites, metasomatism of mantle rocks by crust- derived C-O-H fluids. However, substantial bodies of continental material may never return to the surface as coherent masses of rock, but remain sequestered in the mantle where they melt or become entrained in the deeper mantle circulation. Hence during subduction, PCM's become partitioned by a range of mechanisms. Mechanical partitioning strips away weaker sediment and middle/upper crust, which circulate back up the subduction channel, while denser, stronger transitional pro-crust and lower crust may "stall" near the base of the lithosphere or be irreversibly subducted to join the global mantle circulation. Under certain conditions sediment and upper crustal basement may reach depths for UHPM. Further partitioning takes place by anatexis, which either aids stripping and exhumation of the more melt-prone rock-masses through mechanical softening, or separates melt from residuum so that melt escapes and is accreted to the upper plate leading to "undercrusting", late-orogenic magmatism and further refinement of the crust. Melt that traverses sections of mantle will interact with

Les OPCVM actions au Maroc : mesure et analyse de performance-risque

Directory of Open Access Journals (Sweden)

F. El Majidi

2017-09-01

Full Text Available Cet article a pour objet d’élaborer des classements des OPCVM actions au Maroc sur un an et sur cinq ans selon la performance, le risque et le ratio risque rentabilité. On a utilisé les données figurant sur les tableaux des performances publiés par l’ASFIM. Les calculs des performances sur les deux horizons montrent que les classements des fonds ne se distinguent pas en termes des performances absolues et celles relatives à contrario on a constaté une instabilité dans les classements d’un horizon à un autre. Le nombre de fonds réalisant des performances sur une année est supérieur au nombre de fonds dont la performance est calculée sur cinq ans aussi bien en termes absolu qu’en termes relatif. Enfin, le classement par le ratio risque rentabilité est rigoureux, il diffère de ceux par les performances car les fonds changent de positions et se distinguent par leurs risques inhérents.

Performance study of K{sub e} factors in simplified elastic plastic fatigue analyses with emphasis on thermal cyclic loading

Energy Technology Data Exchange (ETDEWEB)

Lang, Hermann, E-mail: hermann.lang@areva.com [AREVA NP GmbH, PEEA-G, Henri-Dunant-Strasse 50, 91058 Erlangen (Germany); Rudolph, Juergen; Ziegler, Rainer [AREVA NP GmbH, PEEA-G, Henri-Dunant-Strasse 50, 91058 Erlangen (Germany)

2011-08-15

As code-based fully elastic plastic code conforming fatigue analyses are still time consuming, simplified elastic plastic analysis is often applied. This procedure is known to be overly conservative for some conditions due to the applied plastification (penalty) factor K{sub e}. As a consequence, less conservative fully elastic plastic fatigue analyses based on non-linear finite element analyses (FEA) or simplified elastic plastic analysis based on more realistic K{sub e} factors have to be used for fatigue design. The demand for more realistic K{sub e} factors is covered as a requirement of practical fatigue analysis. Different code-based K{sub e} procedures are reviewed in this paper with special regard to performance under thermal cyclic loading conditions. Other approximation formulae such as those by Neuber, Seeger/Beste or Kuehnapfel are not evaluated in this context because of their applicability to mechanical loading excluding thermal cyclic loading conditions typical for power plant operation. Besides the current code-based K{sub e} corrections, the ASME Code Case N-779 (e.g. Adam's proposal) and its modification in ASME Section VIII is considered. Comparison of elastic plastic results and results from the Rules for Nuclear Facility Components and Rules for Pressure Vessels reveals a considerable overestimation of usage factor in the case of ASME III and KTA 3201.2 for the examined examples. Usage factors according to RCC-M, Adams (ASME Code Case N-779), ASME VIII (alternative) and EN 13445-3 are essentially comparable and less conservative for these examples. The K{sub v} correction as well as the applied yield criterion (Tresca or von Mises) essentially influence the quality of the more advanced plasticity corrections (e.g. ASME Code Case N-779 and RCC-M). Hence, new proposals are based on a refined K{sub v} correction.

Northern Marshall Islands Radiological Survey: a quality-control program for a radiochemical analyses

International Nuclear Information System (INIS)

Jennings, C.D.; Mount, M.E.

1983-08-01

More than 16,000 radiochemical analyses were performed on about 5400 samples of soils, vegetation, animals, fish, invertebrates, and water to establish amounts of 90 Sr, 137 Cs, 241 Am, and plutonium isotopes in the Northern Marshall Islands. Three laboratories were contracted by Lawrence Livermore National Laboratory to perform the radiochemical analyses: Environmental Analysis Laboratory (EAL), Richmond, California; Eberline Instrument Corporation (EIC), Albuquerque, New Mexico; and Laboratory of Radiation Ecology (LRE), University of Washington, Seattle, Washington. The analytical precision and accuracy were monitored by regularly including duplicate samples and natural matrix standards in each group of about 100 samples analyzed. Based on the duplicates and standards, over 83% of the radiochemical analyses in this survey were acceptable - 97% of the analyses by EAL, 45% of the analyses by EIC, and 98% of the analyses by LRE

Criticality safety analyses in SKODA JS a.s

International Nuclear Information System (INIS)

Mikolas, P.; Svarny, J.

1999-01-01

This paper describes criticality safety analyses of spent fuel systems for storage and transport of spent fuel performed in SKODA JS s.r.o.. Analyses were performed for different systems both at NPP site including originally designed spent fuel pool with a large pitch between assemblies without any special absorbing material, high density spent fuel pool with an additional absorption by boron steel, depository rack for fresh fuel assemblies with a very large pitch between fuel assemblies, a container for transport of fresh fuel into the reactor pool and a cask for transport and storage of spent fuel and container for final storage depository. required subcriticality has been proven taking into account all possible unfavourable conditions, uncertainties etc. In two cases, burnup credit methodology is expected to be used. (Authors)

A comparison of eight country plans for the Invasive Indo-Pacific Lionfish in the Wider Caribbean

Directory of Open Access Journals (Sweden)

Roxanne E. Graham

2017-10-01

Full Text Available The effects of climate change and marine invasive species have posed a major threat to significant ecological, aesthetic, economic and amenity value to the countries and territories of the Wider Caribbean Region. Today, the Caribbean Sea is plagued with the invasive lionfish (Pterois volitans and P. miles. As the range and abundance of the lionfish throughout the Caribbean has grown, recognition of the grave threat it poses to the native marine ecosystems has prompted the development of lionfish management plans across the region. The efforts of eight countries in the region to manage lionfish are evaluated using the US Environmental Protection Agency Aquatic Invasive Species framework and the inclusion of climate change and/or changing conditions. The countries and overseas territories evaluated were Anguilla, Bahamas, Cayman Islands, Grenada, St. Eustatius, St. Lucia, St. Vincent and the US Virgin Islands. Although specific strategies differed amongst the islands depending upon needs, culture, and individual circumstances, most of the plans included aspects of education and outreach, control and monitoring protocols, and research and information management. Areas that were found to be notably weak to nonexistent included leadership, prevention, early detection and rapid response and restoration; This comparative analysis provides opportunities for knowledge sharing and intra- and inter-country cooperation, facilitating the transfer and development of interventions that contribute to the conservation of significant island biodiversity.

Analyses of MHD instabilities

International Nuclear Information System (INIS)

Takeda, Tatsuoki

1985-01-01

In this article analyses of the MHD stabilities which govern the global behavior of a fusion plasma are described from the viewpoint of the numerical computation. First, we describe the high accuracy calculation of the MHD equilibrium and then the analysis of the linear MHD instability. The former is the basis of the stability analysis and the latter is closely related to the limiting beta value which is a very important theoretical issue of the tokamak research. To attain a stable tokamak plasma with good confinement property it is necessary to control or suppress disruptive instabilities. We, next, describe the nonlinear MHD instabilities which relate with the disruption phenomena. Lastly, we describe vectorization of the MHD codes. The above MHD codes for fusion plasma analyses are relatively simple though very time-consuming and parts of the codes which need a lot of CPU time concentrate on a small portion of the codes, moreover, the codes are usually used by the developers of the codes themselves, which make it comparatively easy to attain a high performance ratio on the vector processor. (author)

Structural analyses of ITER toroidal field coils under fault conditions

International Nuclear Information System (INIS)

Jong, C.T.J.

1992-04-01

ITER (International Thermonuclear Experimental Reactor) is intended to be an experimental thermonuclear tokamak reactor testing the basic physics performance and technologies essential to future fusion reactors. The magnet system of ITER consists essentially of 4 sub-systems, i.e. toroidal field coils (TFCs), poloidal field coils (PFCs), power supplies, and cryogenic supplies. These subsystems do not contain significant radioactivity inventories, but the large energy inventory is a potential accident initiator. The aim of the structural analyses is to prevent accidents from propagating into vacuum vessel, tritium system and cooling system, which all contain significant amounts of radioactivity. As part of design process 3 conditions are defined for PF and TF coils, at which mechanical behaviour has to be analyzed in some detail, viz: normal operating conditions, upset conditions and fault conditions. This paper describes the work carried out by ECN to create a detailed finite element model of 16 TFCs as well as results of some fault condition analyses made with the model. Due to fault conditions, either electrical or mechanical, magnetic loading of TFCs becomes abnormal and further mechanical failure of parts of the overall structure might occur (e.g. failure of coil, gravitational supports, intercoil structure). The analyses performed consist of linear elastic stress analyses and electro-magneto-structural analyses (coupled field analyses). 8 refs.; 5 figs.; 5 tabs

Analyses of containment structures with corrosion damage

International Nuclear Information System (INIS)

Cherry, J.L.

1997-01-01

Corrosion damage that has been found in a number of nuclear power plant containment structures can degrade the pressure capacity of the vessel. This has prompted concerns regarding the capacity of corroded containments to withstand accident loadings. To address these concerns, finite element analyses have been performed for a typical PWR Ice Condenser containment structure. Using ABAQUS, the pressure capacity was calculated for a typical vessel with no corrosion damage. Multiple analyses were then performed with the location of the corrosion and the amount of corrosion varied in each analysis. Using a strain-based failure criterion, a open-quotes lower boundclose quotes, open-quotes best estimateclose quotes, and open-quotes upper boundclose quotes failure level was predicted for each case. These limits were established by: determining the amount of variability that exists in material properties of typical containments, estimating the amount of uncertainty associated with the level of modeling detail and modeling assumptions, and estimating the effect of corrosion on the material properties

Fracture Mechanics Analyses of Reinforced Carbon-Carbon Wing-Leading-Edge Panels

Science.gov (United States)

Raju, Ivatury S.; Phillips, Dawn R.; Knight, Norman F., Jr.; Song, Kyongchan

2010-01-01

Fracture mechanics analyses of subsurface defects within the joggle regions of the Space Shuttle wing-leading-edge RCC panels are performed. A 2D plane strain idealized joggle finite element model is developed to study the fracture behavior of the panels for three distinct loading conditions - lift-off and ascent, on-orbit, and entry. For lift-off and ascent, an estimated bounding aerodynamic pressure load is used for the analyses, while for on-orbit and entry, thermo-mechanical analyses are performed using the extreme cold and hot temperatures experienced by the panels. In addition, a best estimate for the material stress-free temperature is used in the thermo-mechanical analyses. In the finite element models, the substrate and coating are modeled separately as two distinct materials. Subsurface defects are introduced at the coating-substrate interface and within the substrate. The objective of the fracture mechanics analyses is to evaluate the defect driving forces, which are characterized by the strain energy release rates, and determine if defects can become unstable for each of the loading conditions.

Methodological challenges in carbohydrate analyses

Directory of Open Access Journals (Sweden)

Mary Beth Hall

2007-07-01

Full Text Available Carbohydrates can provide up to 80% of the dry matter in animal diets, yet their specific evaluation for research and diet formulation is only now becoming a focus in the animal sciences. Partitioning of dietary carbohydrates for nutritional purposes should reflect differences in digestion and fermentation characteristics and effects on animal performance. Key challenges to designating nutritionally important carbohydrate fractions include classifying the carbohydrates in terms of nutritional characteristics, and selecting analytical methods that describe the desired fraction. The relative lack of information on digestion characteristics of various carbohydrates and their interactions with other fractions in diets means that fractions will not soon be perfectly established. Developing a system of carbohydrate analysis that could be used across animal species could enhance the utility of analyses and amount of data we can obtain on dietary effects of carbohydrates. Based on quantities present in diets and apparent effects on animal performance, some nutritionally important classes of carbohydrates that may be valuable to measure include sugars, starch, fructans, insoluble fiber, and soluble fiber. Essential to selection of methods for these fractions is agreement on precisely what carbohydrates should be included in each. Each of these fractions has analyses that could potentially be used to measure them, but most of the available methods have weaknesses that must be evaluated to see if they are fatal and the assay is unusable, or if the assay still may be made workable. Factors we must consider as we seek to analyze carbohydrates to describe diets: Does the assay accurately measure the desired fraction? Is the assay for research, regulatory, or field use (affects considerations of acceptable costs and throughput? What are acceptable accuracy and variability of measures? Is the assay robust (enhances accuracy of values? For some carbohydrates, we

Disruption simulation experiment using high-frequency rastering electron beam as the heat source

International Nuclear Information System (INIS)

Yamazaki, S.; Seki, M.

1987-01-01

The disruption is a serious event which possibly reduces the lifetime of plasm interactive components, so the effects of the resulting high heat flux on the wall materials must be clearly identified. The authors performed disruption simulation experiments to investigate melting, evaporation, and crack initiation behaviors using an electron beam facility as the heat source. The facility was improved with a high-frequency beam rastering system which provided spatially and temporally uniform heat flux on wider test surfaces. Along with the experiments, thermal and mechanical analyses were also performed. A two-dimensional disruption thermal analysis code (DREAM) was developed for the analyses

Elemental abundance analyses with coadded DAO spectrograms: Pt. 5

International Nuclear Information System (INIS)

Adelman, S.J.

1988-01-01

Elemental abundance analyses of three mercury-manganese stars were performed in a manner consistent with previous analyses of this series. A few correlations are found between the derived abundances and with the effective temperature in accordance with the expectations of radiative diffusion explanations of the derived abundances. The helium abundances are smaller than the value required to sustain the superficial helium convection zone in the atmospheres of these stars. (author)

High-performance scientific computing in the cloud

Science.gov (United States)

Jorissen, Kevin; Vila, Fernando; Rehr, John

2011-03-01

Cloud computing has the potential to open up high-performance computational science to a much broader class of researchers, owing to its ability to provide on-demand, virtualized computational resources. However, before such approaches can become commonplace, user-friendly tools must be developed that hide the unfamiliar cloud environment and streamline the management of cloud resources for many scientific applications. We have recently shown that high-performance cloud computing is feasible for parallelized x-ray spectroscopy calculations. We now present benchmark results for a wider selection of scientific applications focusing on electronic structure and spectroscopic simulation software in condensed matter physics. These applications are driven by an improved portable interface that can manage virtual clusters and run various applications in the cloud. We also describe a next generation of cluster tools, aimed at improved performance and a more robust cluster deployment. Supported by NSF grant OCI-1048052.

Experiments and Analyses of Data Transfers Over Wide-Area Dedicated Connections

Energy Technology Data Exchange (ETDEWEB)

Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Sen, Satyabrata [ORNL; Hanley, Jesse A. [ORNL; Foster, Ian [University of Chicago; Kettimuthu, R. [Argonne National Laboratory (ANL); Wu, Qishi [University of Memphis; Yun, Daqing [Harrisburg University; Towsley, Don [University of Massachusetts, Amherst; Vardoyan, Gayane [University of Massachusetts, Amherst

2017-08-01

Dedicated wide-area network connections are increasingly employed in high-performance computing and big data scenarios. One might expect the performance and dynamics of data transfers over such connections to be easy to analyze due to the lack of competing traffic. However, non-linear transport dynamics and end-system complexities (e.g., multi-core hosts and distributed filesystems) can in fact make analysis surprisingly challenging. We present extensive measurements of memory-to-memory and disk-to-disk file transfers over 10 Gbps physical and emulated connections with 0–366 ms round trip times (RTTs). For memory-to-memory transfers, profiles of both TCP and UDT throughput as a function of RTT show concave and convex regions; large buffer sizes and more parallel flows lead to wider concave regions, which are highly desirable. TCP and UDT both also display complex throughput dynamics, as indicated by their Poincare maps and Lyapunov exponents. For disk-to-disk transfers, we determine that high throughput can be achieved via a combination of parallel I/O threads, parallel network threads, and direct I/O mode. Our measurements also show that Lustre filesystems can be mounted over long-haul connections using LNet routers, although challenges remain in jointly optimizing file I/O and transport method parameters to achieve peak throughput.

EEG analyses with SOBI.

Energy Technology Data Exchange (ETDEWEB)

Glickman, Matthew R.; Tang, Akaysha (University of New Mexico, Albuquerque, NM)

2009-02-01

The motivating vision behind Sandia's MENTOR/PAL LDRD project has been that of systems which use real-time psychophysiological data to support and enhance human performance, both individually and of groups. Relevant and significant psychophysiological data being a necessary prerequisite to such systems, this LDRD has focused on identifying and refining such signals. The project has focused in particular on EEG (electroencephalogram) data as a promising candidate signal because it (potentially) provides a broad window on brain activity with relatively low cost and logistical constraints. We report here on two analyses performed on EEG data collected in this project using the SOBI (Second Order Blind Identification) algorithm to identify two independent sources of brain activity: one in the frontal lobe and one in the occipital. The first study looks at directional influences between the two components, while the second study looks at inferring gender based upon the frontal component.

Embodied energy and emergy analyses of a concentrating solar power (CSP) system

International Nuclear Information System (INIS)

Zhang Meimei; Wang Zhifeng; Xu Chao; Jiang Hui

2012-01-01

Although concentrating solar power (CSP) technology has been projected as one of the most promising candidates to replace conventional power plants burning fossil fuels, the potential advantages and disadvantages of the CSP technology have not been thoroughly evaluated. To better understand the performance of the CSP technology, this paper presents an ecological accounting framework based on embodied energy and emergy analyses methods. The analyses are performed for the 1.5 MW Dahan solar tower power plant in Beijing, China and different evaluation indices used in the embodied energy and emergy analyses are employed to evaluate the plant performance. Our analysis of the CSP plant are compared with six Italian power plants with different energy sources and an American PV plant, which demonstrates the CSP is the superior technology. - Highlights: ► Embodied energy and emergy analyses are employed to evaluate the first solar tower power plant in China. ► Different evaluation indices are quantitatively analyzed to show the advantages of CSP technology. ► This analysis provides insights for making energy policy and investment decisions about CSP technology.

Contracts, Performance Measurement and Accountability in the Public Sector

DEFF Research Database (Denmark)

Drewry, Gavin; Greve, Carsten; Tanquerel, Thierry

This book addresses issues to do with public accountability, audit and performance measurement that are both highly topical and of crucial importance to the theory and practice of public administration in an era of contractualized public management. The literature on public sector contracting...... of audit and accountability in a variety of countries and contexts; the third part offers some wider, cross-cutting perspectives. Based on the work of the EGPA permanent study group on the history of contractualization, Contracts, Performance Measurement and Accountability in the Public Sector draws upon...... - covering both 'hard' agreements (ones that are legally enforceable) and 'soft' agreements (enforced by negotiation and mutual trust) - has been growing for some time and the present book adds a primarily European perspective on contracting, performance-based management and accountability. One important...

Microcomputer-controlled thermoluminescent analyser IJS MR-200

International Nuclear Information System (INIS)

Mihelic, M.; Miklavzic, U.; Rupnik, Z.; Satalic, P.; Spreizer, F.; Zerovnik, I.

1985-01-01

Performances and concept of the multipurpose, microcomputer-controlled thermoluminescent analyser, designed for use in laboratory work TL dosemeters as well as for routine dose readings in the range from ecological to accident doses is described. The main features of the analyser are: time-linear sampling, digitalisation, storing, and subsequent displaying on the monitor time scale of the glow and and temperature curve of the TL material; digital stabilization, control and diagnostic of the analog unit; ability of storing 7 different 8-parametric heating programs; ability of storing 15 evaluation programs defined by 2 or 4 parameters and 3 different algorithms (altogether 5 types of evaluations). Analyser has several features intended for routine work: 9 function keys and possibilities of file forming on cassette or display disc, of dose calculation and averaging, of printing reports with names, and possibility of additional programming in Basic. (author)

Measuring the apparent diffusion coefficient in primary rectal tumors: is there a benefit in performing histogram analyses?

Science.gov (United States)

van Heeswijk, Miriam M; Lambregts, Doenja M J; Maas, Monique; Lahaye, Max J; Ayas, Z; Slenter, Jos M G M; Beets, Geerard L; Bakers, Frans C H; Beets-Tan, Regina G H

2017-06-01

The apparent diffusion coefficient (ADC) is a potential prognostic imaging marker in rectal cancer. Typically, mean ADC values are used, derived from precise manual whole-volume tumor delineations by experts. The aim was first to explore whether non-precise circular delineation combined with histogram analysis can be a less cumbersome alternative to acquire similar ADC measurements and second to explore whether histogram analyses provide additional prognostic information. Thirty-seven patients who underwent a primary staging MRI including diffusion-weighted imaging (DWI; b0, 25, 50, 100, 500, 1000; 1.5 T) were included. Volumes-of-interest (VOIs) were drawn on b1000-DWI: (a) precise delineation, manually tracing tumor boundaries (2 expert readers), and (b) non-precise delineation, drawing circular VOIs with a wide margin around the tumor (2 non-experts). Mean ADC and histogram metrics (mean, min, max, median, SD, skewness, kurtosis, 5th-95th percentiles) were derived from the VOIs and delineation time was recorded. Measurements were compared between the two methods and correlated with prognostic outcome parameters. Median delineation time reduced from 47-165 s (precise) to 21-43 s (non-precise). The 45th percentile of the non-precise delineation showed the best correlation with the mean ADC from the precise delineation as the reference standard (ICC 0.71-0.75). None of the mean ADC or histogram parameters showed significant prognostic value; only the total tumor volume (VOI) was significantly larger in patients with positive clinical N stage and mesorectal fascia involvement. When performing non-precise tumor delineation, histogram analysis (in specific 45th ADC percentile) may be used as an alternative to obtain similar ADC values as with precise whole tumor delineation. Histogram analyses are not beneficial to obtain additional prognostic information.

Individual-based analyses reveal limited functional overlap in a coral reef fish community.

Science.gov (United States)

Brandl, Simon J; Bellwood, David R

2014-05-01

Detailed knowledge of a species' functional niche is crucial for the study of ecological communities and processes. The extent of niche overlap, functional redundancy and functional complementarity is of particular importance if we are to understand ecosystem processes and their vulnerability to disturbances. Coral reefs are among the most threatened marine systems, and anthropogenic activity is changing the functional composition of reefs. The loss of herbivorous fishes is particularly concerning as the removal of algae is crucial for the growth and survival of corals. Yet, the foraging patterns of the various herbivorous fish species are poorly understood. Using a multidimensional framework, we present novel individual-based analyses of species' realized functional niches, which we apply to a herbivorous coral reef fish community. In calculating niche volumes for 21 species, based on their microhabitat utilization patterns during foraging, and computing functional overlaps, we provide a measurement of functional redundancy or complementarity. Complementarity is the inverse of redundancy and is defined as less than 50% overlap in niche volumes. The analyses reveal extensive complementarity with an average functional overlap of just 15.2%. Furthermore, the analyses divide herbivorous reef fishes into two broad groups. The first group (predominantly surgeonfishes and parrotfishes) comprises species feeding on exposed surfaces and predominantly open reef matrix or sandy substrata, resulting in small niche volumes and extensive complementarity. In contrast, the second group consists of species (predominantly rabbitfishes) that feed over a wider range of microhabitats, penetrating the reef matrix to exploit concealed surfaces of various substratum types. These species show high variation among individuals, leading to large niche volumes, more overlap and less complementarity. These results may have crucial consequences for our understanding of herbivorous processes on

Scenario evolution: Interaction between event tree construction and numerical analyses

International Nuclear Information System (INIS)

Barr, G.E.; Barnard, R.W.; Dockery, H.A.; Dunn, E.; MacIntyre, A.T.

1990-01-01

Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Event tree construction is the method that is being used to develop potential failure scenarios for the proposed nuclear waste repository at Yucca Mountain. An event tree begins with an initial event or condition. Subsequent events are listed in a sequence, leading eventually to release of radionuclides to the accessible environment. Ensuring the validity of the scenarios requires iteration between problems constructed using scenarios contained in the event tree sequence, experimental results, and numerical analyses. Details not adequately captured within the tree initially may become more apparent as a result of analyses. To illustrate this process, the authors discuss the iterations used to develop numerical analyses for PACE-90 (Performance Assessment Calculational Exercises) using basaltic igneous activity and human-intrusion event trees

Performing dynamic time history analyses by extension of the response spectrum method

International Nuclear Information System (INIS)

Hulbert, G.M.

1983-01-01

A method is presented to calculate the dynamic time history response of finite-element models using results from response spectrum analyses. The proposed modified time history method does not represent a new mathamatical approach to dynamic analysis but suggests a more efficient ordering of the analytical equations and procedures. The modified time history method is considerably faster and less expensive to use than normal time hisory methods. This paper presents the theory and implementation of the modified time history approach along with comparisons of the modified and normal time history methods for a prototypic seismic piping design problem

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 4: Uncertainty and sensitivity analyses for 40 CFR 191, Subpart B

Energy Technology Data Exchange (ETDEWEB)

1993-08-01

Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume of the 1992 PA contains results of uncertainty and sensitivity analyses with respect to the EPA`s Environmental Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Additional information about the 1992 PA is provided in other volumes. Results of the 1992 uncertainty and sensitivity analyses indicate that, conditional on the modeling assumptions, the choice of parameters selected for sampling, and the assigned parameter-value distributions, the most important parameters for which uncertainty has the potential to affect compliance with 40 CFR 191B are: drilling intensity, intrusion borehole permeability, halite and anhydrite permeabilities, radionuclide solubilities and distribution coefficients, fracture spacing in the Culebra Dolomite Member of the Rustler Formation, porosity of the Culebra, and spatial variability of Culebra transmissivity. Performance with respect to 40 CFR 191B is insensitive to uncertainty in other parameters; however, additional data are needed to confirm that reality lies within the assigned distributions.

Mission creep or responding to wider security needs? The evolving role of mine action organisations in Armed Violence Reduction

Directory of Open Access Journals (Sweden)

Sharmala Naidoo

2013-04-01

Full Text Available Since the late 1980s, mine action organisations have focused their efforts on reducing the social, economic and environmental impacts of anti-personnel mines and other explosive remnants of war (ERW through a broad range of activities, including survey, clearance, mine risk education (MRE, victim assistance, stockpile destruction and advocacy. In recent years, an increasing number of mine action organisations are using their mine action technical expertise and their capacities to operate in difficult environments to reduce armed violence and promote public safety. Several organisations now have armed violence reduction (AVR-related policies, programmes and staff in place. Some may argue that this shift towards AVR is a diversion from the core mandate of mine action organisations. But does this represent a loss of focus and thereby ‘mission creep’ on the part of these organisations? This practice note examines the factors underlying the evolving role of mine action organisations, discusses how these new programmes are contributing to the wider domain of AVR and explores whether these new programmes have resulted in a loss of organisational focus.

Safety analyses of the nuclear-powered ship Mutsu with RETRAN

International Nuclear Information System (INIS)

Naruko, Y.; Ishida, T.; Tanaka, Y.; Futamura, Y.

1982-01-01

To provide a quantitative basis for the safety evaluation of the N.S. Mutsu, a number of safety analyses were performed in the course of reexamination. With respect to operational transient analyses, the RETRAN computer code was used to predict plant performances on the basis of postulated transient scenarios. The COBRA-IV computer code was also used to obtain a value of the minimum DNBR for each transient, which is necessary to predict detailed thermal-hydraulic performances in the core region of the reactor. In the present paper, the following three operational transients, which were calculated as a part of the safety analyses, are being dealt with: a complete loss of load without reactor scram; an excessive load increase incident, which is followed by a 30 percent stepwise load increase in the steam dump flow; and an accidental depressurization of the primary system, which is followed by a sudden full opening of the pressurizer spray valve. A Mutsu two-loop RETRAN model and simulation results were described. The results being compared with those of land-based PWRs, the characteristic features of the Mutsu reactor were presented and the safety of the plant under the operational transient conditions was confirmed

RELAP5 analyses and support of Oconee-1 PTS studies

International Nuclear Information System (INIS)

Charlton, T.R.

1983-01-01

The integrity of a reactor vessel during a severe overcooling transient with primary system pressurization is a current safety concern and has been identified as an Unresolved Safety Issue(USI) A-49 by the US Nuclear Regulatory Commission (NRC). Resolution of USI A-49, denoted as Pressurized Thermal Shock (PTS), is being examined by the US NRC sponsored PTS integration study. In support of this study, the Idaho National Engineering Laboratory (INEL) has performed RELAP5/MOD1.5 thermal-hydraulic analyses of selected overcooling transients. These transient analyses were performed for the Oconee-1 pressurized water reactor (PWR), which is Babcock and Wilcox designed nuclear steam supply system

Casting wider nets for anxiety and depression: disability-driven cross-diagnostic subtypes in a large cohort.

Science.gov (United States)

Wanders, R B K; van Loo, H M; Vermunt, J K; Meijer, R R; Hartman, C A; Schoevers, R A; Wardenaar, K J; de Jonge, P

2016-12-01

In search of empirical classifications of depression and anxiety, most subtyping studies focus solely on symptoms and do so within a single disorder. This study aimed to identify and validate cross-diagnostic subtypes by simultaneously considering symptoms of depression and anxiety, and disability measures. A large cohort of adults (Lifelines, n = 73 403) had a full assessment of 16 symptoms of mood and anxiety disorders, and measurement of physical, social and occupational disability. The best-fitting subtyping model was identified by comparing different hybrid mixture models with and without disability covariates on fit criteria in an independent test sample. The best model's classes were compared across a range of external variables. The best-fitting Mixed Measurement Item Response Theory model with disability covariates identified five classes. Accounting for disability improved differentiation between people reporting isolated non-specific symptoms ['Somatic' (13.0%), and 'Worried' (14.0%)] and psychopathological symptoms ['Subclinical' (8.8%), and 'Clinical' (3.3%)]. Classes showed distinct associations with clinically relevant external variables [e.g. somatization: odds ratio (OR) 8.1-12.3, and chronic stress: OR 3.7-4.4]. The Subclinical class reported symptomatology at subthreshold levels while experiencing disability. No pure depression or anxiety, but only mixed classes were found. An empirical classification model, incorporating both symptoms and disability identified clearly distinct cross-diagnostic subtypes, indicating that diagnostic nets should be cast wider than current phenomenology-based categorical systems.

Ambient air quality at the wider area of an industrial mining facility at Stratoni, Chalkidiki, Greece.

Science.gov (United States)

Gaidajis, Georgios; Angelakoglou, Komninos; Gazea, Emmy

2012-01-01

To assess ambient air quality at the wider area of a mining-industrial facility in Chalkidiki, Greece, the particulate matter with an aerodynamic diameter of 10 μm (PM(10)) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn were monitored for a period of three years (2008-2010). Gravimetric air samplers were employed for the particulate matter sampling at three sampling stations located in the immediate vicinity of the industrial facility and at a neighbouring residential site. Monitoring data indicated that the 3-year median PM(10) concentrations were 23.3 μg/m(3) at the residential site close to the facility and 28.7 μg/m(3) at the site within the facility indicating a minimal influence from the industrial activities to the air quality of the neighbouring residential area. Both annual average and median PM(10) concentration levels were below the indicative European standards, whereas similar spatial and temporal variation was observed for the PM(10) constituents. The average Pb concentrations measured for the three sampling sites were 0.2, 0.146 and 0.174 μg/m(3) respectively, well below the indicative limit of 0.5 μg/m(3). The quantitative and qualitative comparison of PM(10) concentrations and its elemental constituent for the three sampling stations did not indicate any direct influence of the mining-industrial activities to the air quality of the Stratoni residential area.

Environmental management and firm performance: a case study.

Science.gov (United States)

Claver, Enrique; López, María D; Molina, José F; Tarí, Juan J

2007-09-01

This study has as its aim to help to clarify the relationship between environmental management and economic performance by integrating it into a wider framework that includes the relationship between environmental strategy and firm performance, the latter being understood as the combination of environmental performance, competitive advantage and economic performance. A case study of the COATO farming cooperative showed us that its environmental management, focused on prevention logic, has had a positive net effect on its environmental performance. Besides, the order in which these practices were adopted favoured the development of new organisational capabilities that have contributed to the appearance of advantages derived from the greater accumulated experience of employees in creating new projects that are designed to reduce residues and pollution. COATO has also obtained a competitive advantage in differentiation thanks to an improved brand image and to its increased credibility in business relationships. Finally, a positive correlation exists between the pioneering proactive strategy adopted by this cooperative and the improvement of its firm performance with respect to the other firms in its sector.

76 FR 24831 - Site-Specific Analyses for Demonstrating Compliance With Subpart C Performance Objectives

Science.gov (United States)

2011-05-03

...-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance... public health and safety, these amendments would enhance the safe disposal of low-level radioactive waste... would be to enhance the safe disposal of low-level radioactive waste. The NRC is also proposing...

Castor-1C spent fuel storage cask decay heat, heat transfer, and shielding analyses

International Nuclear Information System (INIS)

Rector, D.R.; McCann, R.A.; Jenquin, U.P.; Heeb, C.M.; Creer, J.M.; Wheeler, C.L.

1986-12-01

This report documents the decay heat, heat transfer, and shielding analyses of the Gesellschaft fuer Nuklear Services (GNS) CASTOR-1C cask used in a spent fuel storage demonstration performed at Preussen Elektra's Wurgassen nuclear power plant. The demonstration was performed between March 1982 and January 1984, and resulted in cask and fuel temperature data and cask exterior surface gamma-ray and neutron radiation dose rate measurements. The purpose of the analyses reported here was to evaluate decay heat, heat transfer, and shielding computer codes. The analyses consisted of (1) performing pre-look predictions (predictions performed before the analysts were provided the test data), (2) comparing ORIGEN2 (decay heat), COBRA-SFS and HYDRA (heat transfer), and QAD and DOT (shielding) results to data, and (3) performing post-test analyses if appropriate. Even though two heat transfer codes were used to predict CASTOR-1C cask test data, no attempt was made to compare the two codes. The codes are being evaluated with other test data (single-assembly data and other cask data), and to compare the codes based on one set of data may be premature and lead to erroneous conclusions

RELAP5 thermal-hydraulic analyses of overcooling sequences in a pressurized water reactor

International Nuclear Information System (INIS)

Bolander, M.A.; Fletcher, C.D.; Davis, C.B.; Kullberg, C.M.; Stitt, B.D.; Waterman, M.E.; Burtt, J.D.

1984-01-01

In support of the Pressurized Thermal Shock Integration Study, sponsored by the United States Nuclear Regulatory Commission, the Idaho National Engineering Laboratory has performed analyses of overcooling transients using the RELAP5/MOD1.6 and MOD2.0 computer codes. These analyses were performed for the H.B. Robinson Unit 2 pressurized water reactor, which is a Westinghouse 3-loop design plant. Results of the RELAP5 analyses are presented. The capabilities of the RELAP5 computer code as a tool for analyzing integral plant transients requiring a detailed plant model, including complex trip logic and major control systems, are examined

Het ontwikkelen van een web performance en security analyse applicatie

NARCIS (Netherlands)

O. Hawker

2017-01-01

Doelstelling van de opdracht is om vier security en performance aspecten van een website te meten of bepalen. Dit wordt gedaan met behulp van een site crawler. De resultaten van de metingen inclusief de trends van vorige scans worden aan de gebruiker gepresenteerd. Als laatst moet er rekening met de

Preliminary Results of Ancillary Safety Analyses Supporting TREAT LEU Conversion Activities

Energy Technology Data Exchange (ETDEWEB)

Brunett, A. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Fei, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Strons, P. S. [Argonne National Lab. (ANL), Argonne, IL (United States); Papadias, D. D. [Argonne National Lab. (ANL), Argonne, IL (United States); Hoffman, E. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Kontogeorgakos, D. C. [Argonne National Lab. (ANL), Argonne, IL (United States); Connaway, H. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Wright, A. E. [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-10-01

The Transient Reactor Test Facility (TREAT), located at Idaho National Laboratory (INL), is a test facility designed to evaluate the performance of reactor fuels and materials under transient accident conditions. The facility, an air-cooled, graphite-moderated reactor designed to utilize fuel containing high-enriched uranium (HEU), has been in non-operational standby status since 1994. Currently, in support of the missions of the Department of Energy (DOE) National Nuclear Security Administration (NNSA) Material Management and Minimization (M3) Reactor Conversion Program, a new core design is being developed for TREAT that will utilize low-enriched uranium (LEU). The primary objective of this conversion effort is to design an LEU core that is capable of meeting the performance characteristics of the existing HEU core. Minimal, if any, changes are anticipated for the supporting systems (e.g. reactor trip system, filtration/cooling system, etc.); therefore, the LEU core must also be able to function with the existing supporting systems, and must also satisfy acceptable safety limits. In support of the LEU conversion effort, a range of ancillary safety analyses are required to evaluate the LEU core operation relative to that of the existing facility. These analyses cover neutronics, shielding, and thermal hydraulic topics that have been identified as having the potential to have reduced safety margins due to conversion to LEU fuel, or are required to support the required safety analyses documentation. The majority of these ancillary tasks have been identified in [1] and [2]. The purpose of this report is to document the ancillary safety analyses that have been performed at Argonne National Laboratory during the early stages of the LEU design effort, and to describe ongoing and anticipated analyses. For all analyses presented in this report, methodologies are utilized that are consistent with, or improved from, those used in analyses for the HEU Final Safety Analysis

Reports from the Combined Performance Working Groups

CERN Multimedia

S. Haywood

The main goal of the Combined Performance Groups is to study the detector performance for physics, as well as to monitor the effect of changes to the detector layout and the evolution of the software. The groups combine the expertise available in several different subdetectors. In addition, they are responsible for developing combined reconstruction algorithms and are involved in the calibration of energy scales and optimising resolutions. For the Workshop, the four groups made a real effort to compare the reconstruction in Athena (the "New" C++ software framework) and Atrecon (the "Old" software used for the TDR studies). b-tagging Working Group: Over the last few months, the description of the Inner Detector in the simulation has become more realistic, following the evolution of the detector design. This has caused the amount of material in the simulation to increase and the Pixel B-layer has been moved to a larger radius to allow for a wider beam-pipe. Nevertheless, the good performance of the b-tagging (...

Visions, beliefs, and transformation: exploring cross-sector and transboundary dynamics in the wider Mekong region

Directory of Open Access Journals (Sweden)

Alex Smajgl

2015-06-01

Full Text Available Policy and investment decisions in highly connected, developing regions can have implications that extend beyond their initial objectives of national development and poverty reduction. Local level decisions that aim to promote trajectories toward desirable futures are often transformative, unexpectedly altering factors that are determined at higher regional levels. The converse also applies. The ability to realize desirable local futures diminishes if decision-making processes are not coordinated with other influential governance and decision levels. Providing effective support across multiple levels of decision making in a connected, transformative environment requires (a identification and articulation of desired outcomes at the relevant levels of decision making, (b improved understanding of complex cross-scale interactions that link to potentially transforming decisions, and (c learning among decision makers and decision influencers. Research implemented through multiple participatory modalities can facilitate such relevant system learning to contribute to sustainable adaptation pathways. We test application of a systematic policy engagement framework, the Challenge and Reconstruct Learning or ChaRL framework, on a set of interdependent development decisions in the Mekong region. The analysis presented here is focused on the implementations of the ChaRL process in the Nam Ngum River Basin, Lao People's Democratic Republic and the Tonle Sap Lake and environs, Cambodia to exemplify what cross-scale and cross-sectoral insights were generated to inform decision-making processes in the wider Mekong region. The participatory process described aligns the facilitated development of scenarios articulating shared future visions at local and regional levels with agent-based simulations and facilitates learning by contrasting desired outcomes with likely, potentially maladaptive outcomes.

Pushover, Response Spectrum and Time History Analyses of Safe Rooms in a Poor Performance Masonry Building

International Nuclear Information System (INIS)

Mazloom, M.

2008-01-01

The idea of safe room has been developed for decreasing the earthquake casualties in masonry buildings. The information obtained from the previous ground motions occurring in seismic zones expresses the lack of enough safety of these buildings against earthquakes. For this reason, an attempt has been made to create some safe areas inside the existing masonry buildings, which are called safe rooms. The practical method for making these safe areas is to install some prefabricated steel frames in some parts of the existing structure. These frames do not carry any service loads before an earthquake. However, if a devastating earthquake happens and the load bearing walls of the building are destroyed, some parts of the floors, which are in the safe areas, will fall on the roof of the installed frames and the occupants who have sheltered there will survive. This paper presents the performance of these frames located in a destroying three storey masonry building with favorable conclusions. In fact, the experimental pushover diagram of the safe room located at the ground-floor level of this building is compared with the analytical results and it is concluded that pushover analysis is a good method for seismic performance evaluation of safe rooms. For time history analysis the 1940 El Centro, the 2003 Bam, and the 1990 Manjil earthquake records with the maximum peak accelerations of 0.35g were utilized. Also the design spectrum of Iranian Standard No. 2800-05 for the ground kind 2 is used for response spectrum analysis. The results of time history, response spectrum and pushover analyses show that the strength and displacement capacity of the steel frames are adequate to accommodate the distortions generated by seismic loads and aftershocks properly

Growth curve analyses of the relationship between early maternal age and children's mathematics and reading performance.

Science.gov (United States)

Torres, D Diego

2015-03-01

Regarding the methods used to examine the early maternal age-child academic outcomes relationship, the extant literature has tended to examine change using statistical analyses that fail to appreciate that individuals vary in their rates of growth. Of the one study I have been able to find that employs a true growth model to estimate this relationship, the authors only controlled for characteristics of the maternal household after family formation; confounding background factors of mothers that might select them into early childbearing, a possible source of bias, were ignored. The authors' findings nonetheless suggested an inverse relationship between early maternal age, i.e., a first birth between the ages of 13 and 17, and Canadian adolescents' mean math performance at age 10. Early maternal age was not related to the linear slope of age. To elucidate whether the early maternal age-child academic outcomes association, treated in a growth context, is consistent with this finding, the present study built on it using US data and explored children's mathematics and reading trajectories from age 5 on. Its unique contribution is that it further explicitly controlled for maternal background factors and employed a three-level growth model with repeated measures of children nested within their mothers. Though the strength of the relationship varied between mean initial academic performance and mean academic growth, results confirmed that early maternal age was negatively related to children's mathematics and reading achievement, net of post-teen first birth child-specific and maternal household factors. Once maternal background factors were included, there was no statistically significant relationship between early maternal age and either children's mean initial mathematics and reading scores or their mean mathematics and reading growth. Copyright © 2014 Elsevier Inc. All rights reserved.

Reprocessing of spent nuclear fuel, Annex 3: Chemical and radiometric control analyses

International Nuclear Information System (INIS)

Gal, I.

1964-01-01

Simple, fast and reliable control analyses are obligatory during reprocessing. The analyses performed covered measuring the contents of uranium in water and organic solutions, contents of plutonium in water and organic solutions as well as the free acid in both solutions. In addition temporary analyses were done to determine the density of water and organic solutions as well as content of TBP in kerosine

BranchAnalysis2D/3D automates morphometry analyses of branching structures.

Science.gov (United States)

Srinivasan, Aditya; Muñoz-Estrada, Jesús; Bourgeois, Justin R; Nalwalk, Julia W; Pumiglia, Kevin M; Sheen, Volney L; Ferland, Russell J

2018-01-15

Morphometric analyses of biological features have become increasingly common in recent years with such analyses being subject to a large degree of observer bias, variability, and time consumption. While commercial software packages exist to perform these analyses, they are expensive, require extensive user training, and are usually dependent on the observer tracing the morphology. To address these issues, we have developed a broadly applicable, no-cost ImageJ plugin we call 'BranchAnalysis2D/3D', to perform morphometric analyses of structures with branching morphologies, such as neuronal dendritic spines, vascular morphology, and primary cilia. Our BranchAnalysis2D/3D algorithm allows for rapid quantification of the length and thickness of branching morphologies, independent of user tracing, in both 2D and 3D data sets. We validated the performance of BranchAnalysis2D/3D against pre-existing software packages using trained human observers and images from brain and retina. We found that the BranchAnalysis2D/3D algorithm outputs results similar to available software (i.e., Metamorph, AngioTool, Neurolucida), while allowing faster analysis times and unbiased quantification. BranchAnalysis2D/3D allows inexperienced observers to output results like a trained observer but more efficiently, thereby increasing the consistency, speed, and reliability of morphometric analyses. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysing Student Performance Using Sparse Data of Core Bachelor Courses

Science.gov (United States)

Saarela, Mirka; Karkkainen, Tommi

2015-01-01

Curricula for Computer Science (CS) degrees are characterized by the strong occupational orientation of the discipline. In the BSc degree structure, with clearly separate CS core studies, the learning skills for these and other required courses may vary a lot, which is shown in students' overall performance. To analyze this situation, we apply…

A strategy for the survival and enrichment of NAA in a wider context

International Nuclear Information System (INIS)

Byrne, A.R.

2001-01-01

A review of the current trends in NAA, its applications and the use of research reactors for NAA is given. A case is made for a more versatile, interdisciplinary approach towards NAA, operating in the context of a larger national or regional nuclear analytical center where other nuclear and non-nuclear analyses can be combined. (author)

Analyses and characterization of double shell tank

Energy Technology Data Exchange (ETDEWEB)

1994-10-04

Evaporator candidate feed from tank 241-AP-108 (108-AP) was sampled under prescribed protocol. Physical, inorganic, and radiochemical analyses were performed on tank 108-AP. Characterization of evaporator feed tank waste is needed primarily for an evaluation of its suitability to be safely processed through the evaporator. Such analyses should provide sufficient information regarding the waste composition to confidently determine whether constituent concentrations are within not only safe operating limits, but should also be relevant to functional limits for operation of the evaporator. Characterization of tank constituent concentrations should provide data which enable a prediction of where the types and amounts of environmentally hazardous waste are likely to occur in the evaporator product streams.

Analyses and characterization of double shell tank

International Nuclear Information System (INIS)

1994-01-01

Evaporator candidate feed from tank 241-AP-108 (108-AP) was sampled under prescribed protocol. Physical, inorganic, and radiochemical analyses were performed on tank 108-AP. Characterization of evaporator feed tank waste is needed primarily for an evaluation of its suitability to be safely processed through the evaporator. Such analyses should provide sufficient information regarding the waste composition to confidently determine whether constituent concentrations are within not only safe operating limits, but should also be relevant to functional limits for operation of the evaporator. Characterization of tank constituent concentrations should provide data which enable a prediction of where the types and amounts of environmentally hazardous waste are likely to occur in the evaporator product streams

Danish mutual fund performance

DEFF Research Database (Denmark)

Christensen, Michael

2013-01-01

This article provides the first independent performance analysis of Danish mutual funds. We analyse selectivity and market timing abilities for 71 mutual funds that have been in operation from 2001 to 2010. The results show great fund performance diversity. Half the funds have performed neutrally......, whereas 42% of the funds have shown significantly negative performance and only 7% of the funds have over-performed their benchmark. Furthermore, 14% of the funds analysed possess market timing abilities, but for 8 out of 10 funds, their market timing ability has been unsuccessful....

Accident analyses performed for the Norwegian committee on nuclear power

International Nuclear Information System (INIS)

Tveten, U.; Thomassen, D.; Kvaal, E.

1979-02-01

As part of the work performed for the Norwegian Government Committee on Nuclear Power, risk calculations were carried out for two examples of possible reactor sites in Norway. The calculations were performed with the computer program COMO (or CRACK), which was also used in the American reactor safety study (WASH-1400). In connection with the Norwegian calculations some modifications were made to the program, and relevant data for Norwegian conditions were introduced. The atmospheric dispersion model and meteorological data are discussed at some length. An analysi of the population distribution around both sites is presented and land usage is also discussed. Radiation dose calculations internal, and external, are summarised. Shielding factors from terrain and buildings are also given, and the effect of evacuation briefly discussed. Health effects, immediate mortalities, and delayed and genetic effects are discussed at some length. The economic consequences of an accident due to e.g. evacuation, condemnation of agricultural products, cost of decontamination, loss in property value and relocation costs are estimated. The results are presented graphically as a function of probability. (JIW)

Healthcare and wider societal implications of stillbirth: a population-based cost-of-illness study.

Science.gov (United States)

Campbell, H E; Kurinczuk, J J; Heazell, Aep; Leal, J; Rivero-Arias, O

2018-01-01

To extend previous work and estimate health and social care costs, litigation costs, funeral-related costs, and productivity losses associated with stillbirth in the UK. A population-based cost-of-illness study using a synthesis of secondary data. The National Health Service (NHS) and wider society in the UK. Stillbirths occurring within a 12-month period and subsequent events occurring over the following 2 years. Costs were estimated using published data on events, resource use, and unit costs. Mean health and social care costs, litigation costs, funeral-related costs, and productivity costs for 2 years, reported for a single stillbirth and at a national level. Mean health and social care costs per stillbirth were £4191. Additionally, funeral-related costs were £559, and workplace absence (parents and healthcare professionals) was estimated to cost £3829 per stillbirth. For the UK, the annual health and social care costs were estimated at £13.6 million, and total productivity losses amounted to £706.1 million (98% of this cost was attributable to the loss of the life of the baby). The figures for total productivity losses were sensitive to the perspective adopted about the loss of life of the baby. This work expands the current intelligence on the costs of stillbirth beyond the health service to costs for parents and society, and yet these additional findings must still be regarded as conservative estimates of the true economic costs. The costs of stillbirth are significant, affecting the health service, parents, professionals, and society. Why and how was the study carried out? The personal, social, and emotional consequences of stillbirth are profound. Placing a monetary value on such consequences is emotive, yet necessary, when deciding how best to invest limited healthcare resources. We estimated the average costs associated with a single stillbirth and the costs for all stillbirths occurring in the UK over a 1-year period. What were the main

Far-Field Acoustic Power Level and Performance Analyses of F31/A31 Open Rotor Model at Simulated Scaled Takeoff, Nominal Takeoff, and Approach Conditions: Technical Report I

Science.gov (United States)

Sree, Dave

2015-01-01

Far-field acoustic power level and performance analyses of open rotor model F31/A31 have been performed to determine its noise characteristics at simulated scaled takeoff, nominal takeoff, and approach flight conditions. The nonproprietary parts of the data obtained from experiments in 9- by 15-Foot Low-Speed Wind Tunnel (9?15 LSWT) tests were provided by NASA Glenn Research Center to perform the analyses. The tone and broadband noise components have been separated from raw test data by using a new data analysis tool. Results in terms of sound pressure levels, acoustic power levels, and their variations with rotor speed, angle of attack, thrust, and input shaft power have been presented and discussed. The effect of an upstream pylon on the noise levels of the model has been addressed. Empirical equations relating model's acoustic power level, thrust, and input shaft power have been developed. The far-field acoustic efficiency of the model is also determined for various simulated flight conditions. It is intended that the results presented in this work will serve as a database for comparison and improvement of other open rotor blade designs and also for validating open rotor noise prediction codes.

Value of MR histogram analyses for prediction of microvascular invasion of hepatocellular carcinoma.

Science.gov (United States)

Huang, Ya-Qin; Liang, He-Yue; Yang, Zhao-Xia; Ding, Ying; Zeng, Meng-Su; Rao, Sheng-Xiang

2016-06-01

The objective is to explore the value of preoperative magnetic resonance (MR) histogram analyses in predicting microvascular invasion (MVI) of hepatocellular carcinoma (HCC).Fifty-one patients with histologically confirmed HCC who underwent diffusion-weighted and contrast-enhanced MR imaging were included. Histogram analyses were performed and mean, variance, skewness, kurtosis, 1th, 10th, 50th, 90th, and 99th percentiles were derived. Quantitative histogram parameters were compared between HCCs with and without MVI. Receiver operating characteristics (ROC) analyses were generated to compare the diagnostic performance of tumor size, histogram analyses of apparent diffusion coefficient (ADC) maps, and MR enhancement.The mean, 1th, 10th, and 50th percentiles of ADC maps, and the mean, variance. 1th, 10th, 50th, 90th, and 99th percentiles of the portal venous phase (PVP) images were significantly different between the groups with and without MVI (P histogram analyses-in particular for 1th percentile for PVP images-held promise for prediction of MVI of HCC.

Laser Beam Caustic Measurement with Focal Spot Analyser

DEFF Research Database (Denmark)

Olsen, Flemming Ove; Gong, Hui; Bagger, Claus

2005-01-01

In industrial applications of high power CO2-lasers the caustic characteristics of the laser beam have great effects on the performance of the lasers. A welldefined high intense focused spot is essential for reliable production results. This paper presents a focal spot analyser that is developed...

Analysing Information Systems Security In Higher Learning Institutions Of Uganda

OpenAIRE

Mugyenyi Raymond

2017-01-01

Information communication technology has increased globalisation in higher learning institution all over the world. This has been achieved through introduction of systems that ease operations related to information handling in the institutions. The paper assessed and analysed the information systems security performance status in higher learning institutions of Uganda. The existing policies that govern the information security have also been analysed together with the current status of inform...

Performance-based financing: the same is different.

Science.gov (United States)

Renmans, Dimitri; Holvoet, Nathalie; Criel, Bart; Meessen, Bruno

2017-07-01

Although it is increasingly acknowledged within the Performance-Based Financing (PBF) research community that PBF is more than just payments based on outputs verified for quality, this narrow definition of PBF is still very present in many studies and evaluations. This leads to missed opportunities, misunderstandings and an unhelpful debate. Therefore, we reinforce the claim that PBF should be viewed as a reform package focused on targeted services with many different aspects that go beyond the health worker level. Failing to acknowledge the importance of the different elements of PBF negatively influences the task of practitioners, researchers and policymakers alike. After making the case for this wider definition, we propose three research pathways (describing, understanding and framing PBF) and give a short and tentative starting point for future research, leaving the floor open for more in-depth discussions. From these three vantage points it appears that when it comes to PBF 'the same is different'. Notwithstanding the increased complexity due to the use of the wider definition, progress on these three different research pathways will strongly improve our knowledge, lead to better adapted PBF programs and create a more nuanced debate on PBF. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Pre-test analyses for the NESC1 spinning cylinder experiment

International Nuclear Information System (INIS)

Fokkens, J.H.

1995-10-01

The spinning cylinder experiment organised by the Network for the Evaluation of Steel Components (NESC) is designed to investigate the cleavage initiation behaviour of both surface breaking and subclad defects in simulated end of life RPV material, exposed to a pressurised thermal shock transient. Pre-test structural integrity assessments are performed by the NESC Structural Analysis Task Group (TG3). The results of these structural integrity assessments are used to determine the design of the experiment and especially the sizes of the introduced defects. In this report the results of the pre-test analyses performed by the group Applied Mechanics at ECN - Nuclear Energy are described. Elastic as well as elasto-plastic structural analyses are performed for a surface breaking and a subclad defect in a forged cylinder with a 4 mm cladding. The semi elliptical defects have a depth of 40 mm and an aspect ratio of 1:3. (orig.)

Interpreting Mini-Mental State Examination Performance in Highly Proficient Bilingual Spanish-English and Asian Indian-English Speakers: Demographic Adjustments, Item Analyses, and Supplemental Measures.

Science.gov (United States)

Milman, Lisa H; Faroqi-Shah, Yasmeen; Corcoran, Chris D; Damele, Deanna M

2018-04-17

Performance on the Mini-Mental State Examination (MMSE), among the most widely used global screens of adult cognitive status, is affected by demographic variables including age, education, and ethnicity. This study extends prior research by examining the specific effects of bilingualism on MMSE performance. Sixty independent community-dwelling monolingual and bilingual adults were recruited from eastern and western regions of the United States in this cross-sectional group study. Independent sample t tests were used to compare 2 bilingual groups (Spanish-English and Asian Indian-English) with matched monolingual speakers on the MMSE, demographically adjusted MMSE scores, MMSE item scores, and a nonverbal cognitive measure. Regression analyses were also performed to determine whether language proficiency predicted MMSE performance in both groups of bilingual speakers. Group differences were evident on the MMSE, on demographically adjusted MMSE scores, and on a small subset of individual MMSE items. Scores on a standardized screen of language proficiency predicted a significant proportion of the variance in the MMSE scores of both bilingual groups. Bilingual speakers demonstrated distinct performance profiles on the MMSE. Results suggest that supplementing the MMSE with a language screen, administering a nonverbal measure, and/or evaluating item-based patterns of performance may assist with test interpretation for this population.

Project W-320 SAR and process control thermal analyses

International Nuclear Information System (INIS)

Sathyanarayana, K.

1997-01-01

This report summarizes the results of thermal hydraulic computer modeling supporting Project W-320 for process control and SAR documentation. Parametric analyses were performed for the maximum steady state waste temperature. The parameters included heat load distribution, tank heat load, fluffing factor and thermal conductivity. Uncertainties in the fluffing factor and heat load distribution had the largest effect on maximum waste temperature. Safety analyses were performed for off normal events including loss of ventilation, loss of evaporation and loss of secondary chiller. The loss of both the primary and secondary ventilation was found to be the most limiting event with saturation temperature in the bottom waste reaching in just over 30 days. An evaluation was performed for the potential lowering of the supernatant level in tank 241-AY-102. The evaluation included a loss of ventilation and steam bump analysis. The reduced supernatant level decreased the time to reach saturation temperature in the waste for the loss of ventilation by about one week. However, the consequence of a steam bump were dramatically reduced

"Found Performance": Towards a Musical Methodology for Exploring the Aesthetics of Care.

Science.gov (United States)

Wood, Stuart

2017-09-18

Concepts of performance in fine art reflect key processes in music therapy. Music therapy enables practitioners to reframe patients as performers, producing new meanings around the clinical knowledge attached to medical histories and constructs. In this paper, music therapy practices are considered in the wider context of art history, with reference to allied theories from social research. Tracing a century in art that has revised the performativity of found objects (starting with Duchamp's "Fountain"), and of found sound (crystallised by Cage's 4' 33) this paper proposes that music therapy might be a pioneer methodology of "found performance". Examples from music therapy and contemporary socially engaged art practices are brought as potential links between artistic methodologies and medical humanities research, with specific reference to notions of Aesthetics of Care.

Finite element analyses of a linear-accelerator electron gun

Science.gov (United States)

Iqbal, M.; Wasy, A.; Islam, G. U.; Zhou, Z.

2014-02-01

Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator.

Finite element analyses of a linear-accelerator electron gun

Energy Technology Data Exchange (ETDEWEB)

Iqbal, M., E-mail: muniqbal.chep@pu.edu.pk, E-mail: muniqbal@ihep.ac.cn [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wasy, A. [Department of Mechanical Engineering, Changwon National University, Changwon 641773 (Korea, Republic of); Islam, G. U. [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Zhou, Z. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

2014-02-15

Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator.

Finite element analyses of a linear-accelerator electron gun

International Nuclear Information System (INIS)

Iqbal, M.; Wasy, A.; Islam, G. U.; Zhou, Z.

2014-01-01

Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator

Analysing organisational context: case studies on the contribution of absorptive capacity theory to understanding inter-organisational variation in performance improvement.

Science.gov (United States)

Harvey, Gill; Jas, Pauline; Walshe, Kieran

2015-01-01

Organisational context is frequently cited as an important consideration when implementing and evaluating quality improvement interventions in healthcare, but limited guidance is available on which aspects of context are most influential or modifiable. This paper examines how internal and external contextual factors mediate organisational-level performance improvement through applying the knowledge-based theory of absorptive capacity (AC). Three healthcare case studies are presented. Each case is a UK National Health Service organisation that had been identified as having performance problems. Qualitative data were collected through semi-structured interviews with general and clinical managers within the organisation and members of external teams supporting or overseeing performance improvement (n=22). Interview data were analysed using an existing AC framework from the literature. The organisation with the highest AC showed the quickest and most comprehensive performance improvement. Internal characteristics including strategic priorities, processes for managing information, communication and orientation to learning and development impacted on the organisation's ability to engage successfully with external stakeholders and make use of available knowledge. This enabled the organisation to thrive despite the challenging external environment. Lower levels of AC appeared to delay or limit the improvement trajectory. Developing a more detailed and nuanced understanding of how context influences improvement is an important step towards achieving more effective and sustainable quality improvement programmes in healthcare. AC, with its focus on knowledge and organisational learning, provides a useful way to explore the relationship between context and quality improvement and represents a potentially valuable area for future research and development. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go

Identification of a truncated splice variant of IL-18 receptor alpha in the human and rat, with evidence of wider evolutionary conservation

Directory of Open Access Journals (Sweden)

Chris S. Booker

2014-09-01

Full Text Available Interleukin-18 (IL-18 is a pro-inflammatory cytokine which stimulates activation of the nuclear factor kappa beta (NF-κB pathway via interaction with the IL-18 receptor. The receptor itself is formed from a dimer of two subunits, with the ligand-binding IL-18Rα subunit being encoded by the IL18R1 gene. A splice variant of murine IL18r1, which has been previously described, is formed by transcription of an unspliced intron (forming a ‘type II’ IL18r1 transcript and is predicted to encode a receptor with a truncated intracellular domain lacking the capacity to generate downstream signalling. In order to examine the relevance of this finding to human IL-18 function, we assessed the presence of a homologous transcript by reverse transcription-polymerase chain reaction (RT-PCR in the human and rat as another common laboratory animal. We present evidence for type II IL18R1 transcripts in both species. While the mouse and rat transcripts are predicted to encode a truncated receptor with a novel 5 amino acid C-terminal domain, the human sequence is predicted to encode a truncated protein with a novel 22 amino acid sequence bearing resemblance to the ‘Box 1’ motif of the Toll/interleukin-1 receptor (TIR domain, in a similar fashion to the inhibitory interleukin-1 receptor 2. Given that transcripts from these three species are all formed by inclusion of homologous unspliced intronic regions, an analysis of homologous introns across a wider array of 33 species with available IL18R1 gene records was performed, which suggests similar transcripts may encode truncated type II IL-18Rα subunits in other species. This splice variant may represent a conserved evolutionary mechanism for regulating IL-18 activity.

The role of CFD computer analyses in hydrogen safety management

International Nuclear Information System (INIS)

Komen, E.M.J; Visser, D.C; Roelofs, F.; Te Lintelo, J.G.T

2014-01-01

The risks of hydrogen release and combustion during a severe accident in a light water reactor have attracted considerable attention after the Fukushima accident in Japan. Reliable computer analyses are needed for the optimal design of hydrogen mitigation systems, like e.g. passive autocatalytic recombiners (PARs), and for the assessment of the associated residual risk of hydrogen combustion. Traditionally, so-called Lumped Parameter (LP) computer codes are being used for these purposes. In the last decade, significant progress has been made in the development, validation, and application of more detailed, three-dimensional Computational Fluid Dynamics (CFD) simulations for hydrogen safety analyses. The objective of the current paper is to address the following questions: - When are CFD computer analyses needed complementary to the traditional LP code analyses for hydrogen safety management? - What is the validation status of the CFD computer code for hydrogen distribution, mitigation, and combustion analyses? - Can CFD computer analyses nowadays be executed in practical and reliable way for full scale containments? The validation status and reliability of CFD code simulations will be illustrated by validation analyses performed for experiments executed in the PANDA, THAI, and ENACCEF facilities. (authors)

A data management program for the Electra 800 automatic analyser.

Science.gov (United States)

Cambus, J P; Nguyen, F; de Graeve, J; Aragon, B; Valdiguie, P

1994-10-01

The Electra 800 automatic coagulation analyser rapidly performs most chronometric coagulation tests with high precision. To facilitate data handling, software, adaptable to any PC running under MS-DOS, was written to manage the analyser. Data are automatically collected via the RS232 interface or can be manually input. The software can handle 64 different analyses, all entirely 'user defined'. An 'electronic worksheet' presents the results in pages of ten patients. This enables the operator to assess the data and to perform verifications or complementary tests if necessary. All results outside a predetermined range can be flagged and results can be deleted, modified or added. A patient's previous files can be recalled as the data are archived at the end of the day. A 120 Mb disk can store approximately 130,000 patient files. A daily archive function can print the day's work in alphabetical order. A communication protocol allows connection to a mainframe computer. This program and the user's manual are available on request, free of charge, from the authors.

Stress analyses of ITER toroidal field coils under fault conditions

International Nuclear Information System (INIS)

Jong, C.T.J.

1990-02-01

The International Thermonuclear Experimental Reactor (ITER) is intended as an experimental thermonuclear tokamak reactor for testing the basic physics, performance and technologies essential to future fusion reactors. The ITER design will be based on extensive new design work, supported by new physical and technological results, and on the great body of experience built up over several years from previous national and international reactor studies. Conversely, the ITER design process should provide the fusion community with valuable insights into what key areas need further development or clarification as we move forward towards practical fusion power. As part of the design process of the ITER toroidal field coils the mechanical behaviour of the magnetic system under fault conditions has to be analysed in more detail. This paper describes the work carried out to create a detailed finite element model of two toroidal field coils as well as some results of linear elastic analyses with fault conditions. The analyses have been performed with the finite element code ANSYS. (author). 5 refs.; 8 figs.; 2 tabs

Graphite analyser upgrade for the IRIS spectrometer at ISIS

International Nuclear Information System (INIS)

Campbell, S.I.; Telling, M.T.F.; Carlile, C.J.

1999-01-01

Complete text of publication follows. The pyrolytic graphite (PG) analyser bank on the IRIS high resolution inelastic spectrometer [1] at ISIS is to be upgraded. At present the analyser consists of 1350 graphite pieces (6 rows by 225 columns) cooled to 25K [2]. The new analyser array, however, will provide a three-fold increase in area and employ 4212 crystal pieces (18 rows by 234 columns). In addition, the graphite crystals will be cooled close to liquid helium temperature to further reduce thermal diffuse scattering (TDS) and improve the sensitivity of the spectrometer [2]. For an instrument such as IRIS, with its analyser in near back-scattering geometry, optical aberration and variation in the time-of-flight of the analysed neutrons is introduced as one moves out from the horizontal scattering plane. To minimise such effects, the profile of the analyser array has been redesigned. The concept behind the design of the new analyser bank and factors that effect the overall resolution of the instrument are discussed. Results of Monte Carlo simulations of the expected resolution and intensity of the complete instrument are presented and compared to the current instrument performance. (author) [1] C.J. Carlile et al, Physica B 182 (1992) 431-440.; [2] C.J. Carlile et al, Nuclear Instruments and Methods In Physics Research A 338 (1994) 78-82

A face only an investor could love: CEOs' facial structure predicts their firms' financial performance.

Science.gov (United States)

Wong, Elaine M; Ormiston, Margaret E; Haselhuhn, Michael P

2011-12-01

Researchers have theorized that innate personal traits are related to leadership success. Although links between psychological characteristics and leadership success have been well established, research has yet to identify any objective physical traits of leaders that predict organizational performance. In the research reported here, we identified leaders' facial structure as a specific physical trait that correlates with organizational performance. Specifically, we found that firms whose male CEOs have wider faces (relative to facial height) achieve superior financial performance. Decision-making dynamics within a firm's leadership team moderate this effect, such that the relationship between a given CEO's facial measurements and his firm's financial performance is stronger in firms with cognitively simple leadership teams.

Analysing collaborative performance and cost allocation for the joint route planning problem

OpenAIRE

Verdonck, Lotte; Ramaekers, Katrien; Depaire, Benoît; Caris, An; Janssens, Gerrit K.

2017-01-01

Although organisations become increasingly aware of the inevitable character of horizontal collaboration, surveys report failure rates up to 70 percent for starting strategic partnerships. While a growing body of research acknowledges the importance of the partner selection and cost allocation process, no extensive study has been performed on the numerical relationship between specific company traits, applied allocation mechanisms and collaborative performance. This paper investigates the imp...

Diagnostic Performance and Utility of Quantitative EEG Analyses in Delirium: Confirmatory Results From a Large Retrospective Case-Control Study.

Science.gov (United States)

Fleischmann, Robert; Tränkner, Steffi; Bathe-Peters, Rouven; Rönnefarth, Maria; Schmidt, Sein; Schreiber, Stephan J; Brandt, Stephan A

2018-03-01

The lack of objective disease markers is a major cause of misdiagnosis and nonstandardized approaches in delirium. Recent studies conducted in well-selected patients and confined study environments suggest that quantitative electroencephalography (qEEG) can provide such markers. We hypothesize that qEEG helps remedy diagnostic uncertainty not only in well-defined study cohorts but also in a heterogeneous hospital population. In this retrospective case-control study, EEG power spectra of delirious patients and age-/gender-matched controls (n = 31 and n = 345, respectively) were fitted in a linear model to test their performance as binary classifiers. We subsequently evaluated the diagnostic performance of the best classifiers in control samples with normal EEGs (n = 534) and real-world samples including pathologic findings (n = 4294). Test reliability was estimated through split-half analyses. We found that the combination of spectral power at F3-P4 at 2 Hz (area under the curve [AUC] = .994) and C3-O1 at 19 Hz (AUC = .993) provided a sensitivity of 100% and a specificity of 99% to identify delirious patients among normal controls. These classifiers also yielded a false positive rate as low as 5% and increased the pretest probability of being delirious by 57% in an unselected real-world sample. Split-half reliabilities were .98 and .99, respectively. This retrospective study yielded preliminary evidence that qEEG provides excellent diagnostic performance to identify delirious patients even outside confined study environments. It furthermore revealed reduced beta power as a novel specific finding in delirium and that a normal EEG excludes delirium. Prospective studies including parameters of pretest probability and delirium severity are required to elaborate on these promising findings.

Blaze-DEMGPU: Modular high performance DEM framework for the GPU architecture

Directory of Open Access Journals (Sweden)

Nicolin Govender

2016-01-01

Full Text Available Blaze-DEMGPU is a modular GPU based discrete element method (DEM framework that supports polyhedral shaped particles. The high level performance is attributed to the light weight and Single Instruction Multiple Data (SIMD that the GPU architecture offers. Blaze-DEMGPU offers suitable algorithms to conduct DEM simulations on the GPU and these algorithms can be extended and modified. Since a large number of scientific simulations are particle based, many of the algorithms and strategies for GPU implementation present in Blaze-DEMGPU can be applied to other fields. Blaze-DEMGPU will make it easier for new researchers to use high performance GPU computing as well as stimulate wider GPU research efforts by the DEM community.

Finite element analyses for seismic shear wall international standard problem

International Nuclear Information System (INIS)

Park, Y.J.; Hofmayer, C.H.

1998-04-01

Two identical reinforced concrete (RC) shear walls, which consist of web, flanges and massive top and bottom slabs, were tested up to ultimate failure under earthquake motions at the Nuclear Power Engineering Corporation's (NUPEC) Tadotsu Engineering Laboratory, Japan. NUPEC provided the dynamic test results to the OECD (Organization for Economic Cooperation and Development), Nuclear Energy Agency (NEA) for use as an International Standard Problem (ISP). The shear walls were intended to be part of a typical reactor building. One of the major objectives of the Seismic Shear Wall ISP (SSWISP) was to evaluate various seismic analysis methods for concrete structures used for design and seismic margin assessment. It also offered a unique opportunity to assess the state-of-the-art in nonlinear dynamic analysis of reinforced concrete shear wall structures under severe earthquake loadings. As a participant of the SSWISP workshops, Brookhaven National Laboratory (BNL) performed finite element analyses under the sponsorship of the U.S. Nuclear Regulatory Commission (USNRC). Three types of analysis were performed, i.e., monotonic static (push-over), cyclic static and dynamic analyses. Additional monotonic static analyses were performed by two consultants, F. Vecchio of the University of Toronto (UT) and F. Filippou of the University of California at Berkeley (UCB). The analysis results by BNL and the consultants were presented during the second workshop in Yokohama, Japan in 1996. A total of 55 analyses were presented during the workshop by 30 participants from 11 different countries. The major findings on the presented analysis methods, as well as engineering insights regarding the applicability and reliability of the FEM codes are described in detail in this report. 16 refs., 60 figs., 16 tabs

Determining required valve performance for discrete control of PTO cylinders for wave energy

DEFF Research Database (Denmark)

Hansen, Rico Hjerm; Andersen, Torben Ole; Pedersen, Henrik C.

2012-01-01

investigates the required valve performance to achieve this energy efficient operation, while meeting basic dynamic requirements. The components making up the total energy loss during shifting is identified by analytically expressing the losses from the governing differential equations. From the analysis...... a framework for evaluating the adequacy of a valve’s response is established, and the analysis shows the results may be normalised for a wider range of systems. Finally, the framework is successfully applied to the Wavestar converter....

PRECLOSURE CONSEQUENCE ANALYSES FOR LICENSE APPLICATION

International Nuclear Information System (INIS)

S. Tsai

2005-01-01

Radiological consequence analyses are performed for potential releases from normal operations in surface and subsurface facilities and from Category 1 and Category 2 event sequences during the preclosure period. Surface releases from normal repository operations are primarily from radionuclides released from opening a transportation cask during dry transfer operations of spent nuclear fuel (SNF) in Dry Transfer Facility 1 (DTF 1), Dry Transfer Facility 2 (DTF 2), the Canister Handling facility (CHF), or the Fuel Handling Facility (FHF). Subsurface releases from normal repository operations are from resuspension of waste package surface contamination and neutron activation of ventilated air and silica dust from host rock in the emplacement drifts. The purpose of this calculation is to demonstrate that the preclosure performance objectives, specified in 10 CFR 63.111(a) and 10 CFR 63.111(b), have been met for the proposed design and operations in the geologic repository operations area. Preclosure performance objectives are discussed in Section 6.2.3 and are summarized in Tables 1 and 2

PRECLOSURE CONSEQUENCE ANALYSES FOR LICENSE APPLICATION

Energy Technology Data Exchange (ETDEWEB)

S. Tsai

2005-01-12

Radiological consequence analyses are performed for potential releases from normal operations in surface and subsurface facilities and from Category 1 and Category 2 event sequences during the preclosure period. Surface releases from normal repository operations are primarily from radionuclides released from opening a transportation cask during dry transfer operations of spent nuclear fuel (SNF) in Dry Transfer Facility 1 (DTF 1), Dry Transfer Facility 2 (DTF 2), the Canister Handling facility (CHF), or the Fuel Handling Facility (FHF). Subsurface releases from normal repository operations are from resuspension of waste package surface contamination and neutron activation of ventilated air and silica dust from host rock in the emplacement drifts. The purpose of this calculation is to demonstrate that the preclosure performance objectives, specified in 10 CFR 63.111(a) and 10 CFR 63.111(b), have been met for the proposed design and operations in the geologic repository operations area. Preclosure performance objectives are discussed in Section 6.2.3 and are summarized in Tables 1 and 2.

High-temperature performance of the brazement of molybdenum single crystals

International Nuclear Information System (INIS)

Hirakoa, Y.

1992-01-01

Molybdenum is utilized in the fields of high-temperature vacuum industry, electrical and electronic industry, and chemical industries. For the wider application of this material, however, it is necessary to obtain a joining with good quality. In this investigation, high-temperature brazing of a single-crystalline molybdenum was performed. Then the bend properties of the brazement after a high-temperature annealing were evaluated. The single-crystalline molybdenum had been produced by the secondary recrystallization method. Brazing was performed in vacuum at 2273K using Mo-40Ru alloy powder as a brazing material. The brazement was investigated via optical microscopy, EPMA, Knoop hardness, and three point bending. In this paper the effects of annealing in hydrogen and vacuum are discussed

Using a Wider Lens to Shift the Discourse on Food in Canadian Curriculum Policies

Science.gov (United States)

Robertson, Lorayne; Scheidler-Benns, Joli

2016-01-01

Healthy eating is important to overall health, but Canadian health agencies disagree on the degree to which lifestyle or society determines healthy eating. The authors review the literature and design a policy analysis framework that captures discursive elements of both arguments. They apply this framework to education policy, analysing the…

Statistical analyses of the performance of Macedonian investment and pension funds

Directory of Open Access Journals (Sweden)

Petar Taleski

2015-10-01

Full Text Available The foundation of the post-modern portfolio theory is creating a portfolio based on a desired target return. This specifically applies to the performance of investment and pension funds that provide a rate of return meeting payment requirements from investment funds. A desired target return is the goal of an investment or pension fund. It is the primary benchmark used to measure performances, dynamic monitoring and evaluation of the risk–return ratio on investment funds. The analysis in this paper is based on monthly returns of Macedonian investment and pension funds (June 2011 - June 2014. Such analysis utilizes the basic, but highly informative statistical characteristic moments like skewness, kurtosis, Jarque–Bera, and Chebyishev’s Inequality. The objective of this study is to perform a trough analysis, utilizing the above mentioned and other types of statistical techniques (Sharpe, Sortino, omega, upside potential, Calmar, Sterling to draw relevant conclusions regarding the risks and characteristic moments in Macedonian investment and pension funds. Pension funds are the second largest segment of the financial system, and has great potential for further growth due to constant inflows from pension insurance. The importance of investment funds for the financial system in the Republic of Macedonia is still small, although open-end investment funds have been the fastest growing segment of the financial system. Statistical analysis has shown that pension funds have delivered a significantly positive volatility-adjusted risk premium in the analyzed period more so than investment funds.

Forced vibration tests and simulation analyses of a nuclear reactor building. Part 2: simulation analyses

International Nuclear Information System (INIS)

Kuno, M.; Nakagawa, S.; Momma, T.; Naito, Y.; Niwa, M.; Motohashi, S.

1995-01-01

Forced vibration tests of a BWR-type reactor building. Hamaoka Unit 4, were performed. Valuable data on the dynamic characteristics of the soil-structure interaction system were obtained through the tests. Simulation analyses of the fundamental dynamic characteristics of the soil-structure system were conducted, using a basic lumped mass soil-structure model (lattice model), and strong correlation with the measured data was obtained. Furthermore, detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building. (author). 4 refs., 11 figs

Quality assurance in road traffic analyses in Switzerland.

Science.gov (United States)

Briellmann, Thomas A; Sigrist, Thomas; Augsburger, Marc; Favrat, Bernard; Oestreich, Andrea; Deom, André

2010-05-20

Swiss laboratories performing toxicological road traffic analyses have been authorized for many years by the Swiss Federal Roads Office (FEDRO). In 2003 FEDRO signed a contract with the Swiss Society of Legal Medicine (SSLM) to organize the complete quality management concerning road traffic analyses. For this purpose a multidisciplinary working group was established under the name of "road traffic commission (RTC)". RTC has to organize external quality control, to interpret the results of these controls, to perform audits in the laboratories and to report all results to FEDRO. Furthermore the working group can be mandated for special tasks by FEDRO. As an independent organization the Swiss Center for Quality Control (CSCQ) in Geneva manages the external quality controls in the laboratory over the past years. All tested drugs and psychoactive substances are listed in a federal instruction. The so-called 'zero tolerance substances' (THC, morphine, cocaine, amphetamine, methamphetamine, MDMA and MDEA) and their metabolites have to be tested once a year, all other substances (benzodiazepines, zolpidem, phenobarbital, etc.) periodically. Results over the last years show that all laboratories are generally within the confidence interval of +/-30% of the mean value. In cases of non-conformities measures have to be taken immediately and reported to the working group. External audits are performed triennially but accredited laboratories can combine this audit with the approval of the Swiss Accreditation Service (SAS). During the audits a special checklist filled in by the laboratory director is assessed. Non-conformities have to be corrected. During the process of establishing a new legislation, RTC had an opportunity of advising FEDRO. In collaboration with FEDRO, RTC and hence SSLM can work actively on improving of quality assurance in road traffic toxicological analyses, and has an opportunity to bring its professional requests to the federal authorities.

Radiological analyses of France Telecom surge arresters. Study performed for the CGT FAPT Cantal

International Nuclear Information System (INIS)

2010-02-01

This document reports the radiological characterization of various versions of surge arresters used in the past to protect telephone lines against over-voltages. These equipment, which use various radioactive materials, were assessed by gamma radiation flow measurements, alpha-beta-gamma count rate measurements, dose rate measurements, gamma spectrometry analyses, tritium emanation test, radon 222 emanation test, smearing. Recommendations are formulated to manage radioactive surge arresters which are still being operated

Unconscious analyses of visual scenes based on feature conjunctions.

Science.gov (United States)

Tachibana, Ryosuke; Noguchi, Yasuki

2015-06-01

To efficiently process a cluttered scene, the visual system analyzes statistical properties or regularities of visual elements embedded in the scene. It is controversial, however, whether those scene analyses could also work for stimuli unconsciously perceived. Here we show that our brain performs the unconscious scene analyses not only using a single featural cue (e.g., orientation) but also based on conjunctions of multiple visual features (e.g., combinations of color and orientation information). Subjects foveally viewed a stimulus array (duration: 50 ms) where 4 types of bars (red-horizontal, red-vertical, green-horizontal, and green-vertical) were intermixed. Although a conscious perception of those bars was inhibited by a subsequent mask stimulus, the brain correctly analyzed the information about color, orientation, and color-orientation conjunctions of those invisible bars. The information of those features was then used for the unconscious configuration analysis (statistical processing) of the central bars, which induced a perceptual bias and illusory feature binding in visible stimuli at peripheral locations. While statistical analyses and feature binding are normally 2 key functions of the visual system to construct coherent percepts of visual scenes, our results show that a high-level analysis combining those 2 functions is correctly performed by unconscious computations in the brain. (c) 2015 APA, all rights reserved).

Break spectrum analyses for small break loss of coolant accidents in a RESAR-3S Plant

International Nuclear Information System (INIS)

Fletcher, C.D.; Kullberg, C.M.

1986-03-01

A series of thermal-hydraulic analyses were performed to investigate phenomena occurring during small break loss-of-coolant-accident (LOCA) sequences in a RESAR-3S pressurized water reactor. The analysis included simulations of plant behavior using the TRAC-PF1 and RELAP5/MOD2 computer codes. Series of calculations were performed using both codes for different break sizes. The analyses presented here also served an audit function in that the results shown here were used by the US Nuclear Regulatory Commission (NRC) as an independent confirmation of similar analyses performed by Westinghouse Electric Company using another computer code. 10 refs., 62 figs., 14 tabs

Standardized analyses of nuclear shipping containers

International Nuclear Information System (INIS)

Parks, C.V.; Hermann, O.W.; Petrie, L.M.; Hoffman, T.J.; Tang, J.S.; Landers, N.F.; Turner, W.D.

1983-01-01

This paper describes improved capabilities for analyses of nuclear fuel shipping containers within SCALE -- a modular code system for Standardized Computer Analyses for Licensing Evaluation. Criticality analysis improvements include the new KENO V, a code which contains an enhanced geometry package and a new control module which uses KENO V and allows a criticality search on optimum pitch (maximum k-effective) to be performed. The SAS2 sequence is a new shielding analysis module which couples fuel burnup, source term generation, and radial cask shielding. The SAS5 shielding sequence allows a multidimensional Monte Carlo analysis of a shipping cask with code generated biasing of the particle histories. The thermal analysis sequence (HTAS1) provides an easy-to-use tool for evaluating a shipping cask response to the accident capability of the SCALE system to provide the cask designer or evaluator with a computational system that provides the automated procedures and easy-to-understand input that leads to standarization

Wider than the Sky

Science.gov (United States)

Barbieri, Richard

2015-01-01

More has been learned about the human brain in the past few decades than in the whole prior history of humanity. In this article Richard Barbieri considers learning and the brain from a few different perspectives. He begins by examining the practice of neuroscience itself and what was understood about the brain before neuroscience. This leads to a…

Wider den Klima-Totalitarismus

CERN Multimedia

Gärtner, Edgar

2006-01-01

The Kyoto Protocol in 1997 has turned out unsuitable, thinks Edgar Gärtner. The director of the ecological forum of the Centre for the new Europe in Bruxelles explains how for him successful protection of the atmosphere looks essential. (1/2 page)

Scientometric analyses of studies on the role of innate variation in athletic performance.

Science.gov (United States)

Lombardo, Michael P; Emiah, Shadie

2014-01-01

Historical events have produced an ideologically charged atmosphere in the USA surrounding the potential influences of innate variation on athletic performance. We tested the hypothesis that scientific studies of the role of innate variation in athletic performance were less likely to have authors with USA addresses than addresses elsewhere because of this cultural milieu. Using scientometric data collected from 290 scientific papers published in peer-reviewed journals from 2000-2012, we compared the proportions of authors with USA addresses with those that listed addresses elsewhere that studied the relationships between athletic performance and (a) prenatal exposure to androgens, as indicated by the ratio between digits 2 and 4, and (b) the genotypes for angiotensin converting enzyme, α-actinin-3, and myostatin; traits often associated with athletic performance. Authors with USA addresses were disproportionately underrepresented on papers about the role of innate variation in athletic performance. We searched NIH and NSF databases for grant proposals solicited or funded from 2000-2012 to determine if the proportion of authors that listed USA addresses was associated with funding patterns. NIH did not solicit grant proposals designed to examine these factors in the context of athletic performance and neither NIH nor NSF funded grants designed to study these topics. We think the combined effects of a lack of government funding and the avoidance of studying controversial or non-fundable topics by USA based scientists are responsible for the observation that authors with USA addresses were underrepresented on scientific papers examining the relationships between athletic performance and innate variation.

SOL-PAC: Integrated solar heating and heat pump systems for refurbished buildings - Performance analysis; SOL-PAC: analyse des performances du couplage d'une pompe a chaleur avec une installation solaire thermique pour la renovation - Rapport final

Energy Technology Data Exchange (ETDEWEB)

Citherlet, C.; Bony, J.; Nguyen, B.

2008-07-01

The purpose of this study is to evaluate the energetic and economic performances of various types of brine/water heat pumps coupled with a fan coil fitted with solar collectors. Different indicators such as the annual coefficient of performance or the electricity consumption have been compared between the different analysed systems. The optimization of the energy control system and energy storage was investigated in order to reduce the operation time of the fan coil. This study has been performed using the TRNSYS computerized simulation package. The icing of the fan coil as well as its defrosting cycles could not been taken into account within the framework of this project, because of a lack of a numerical model. At current electricity prices, the most economical solution remains the heat pump without solar collectors. However, from an energy point of view, the annual overall coefficient of performance of the installation may be improved by 15 to 36%, depending on the climate, thanks to the coupling with solar collectors. (author)

Validation of a fully autonomous phosphate analyser based on a microfluidic lab-on-a-chip

DEFF Research Database (Denmark)

Slater, Conor; Cleary, J.; Lau, K.T.

2010-01-01

of long-term operation. This was proven by a bench top calibration of the analyser using standard solutions and also by comparing the analyser's performance to a commercially available phosphate monitor installed at a waste water treatment plant. The output of the microfluidic lab-on-a-chip analyser...

Floristic diversity of posavina's floodplain forests in serbia and their wider geographical context

International Nuclear Information System (INIS)

Jurisic, B.; Puvaca, N.

2014-01-01

In order to detect floristic divergence of analysed stands we applied TWINSPAN classification and ordinary Correspondence Analysis. Both analyses have shown an almost identical result of floristic composition, where 114 studied samples were grouped into seven association groups at the third twinspan classification level. These seven groups, successively from the most humid to most dry, comprising two large groups of plant associations, completely corresponding to two alliances: Forest of Pedunculate Oak and Alder and Forest of Pedunculate Oak and Hornbeam. SIMPER procedure have shown tahat within the first 20.51% of cumulative contribution, the floristic divegence among the studied forest stands includes 13 taxa: Carpinus betulus., Fraxinus angustifolia, Quercus cerris, Amorpha fruticosa, Convallaria majalis, Crataegus oxyacantha, Quercus robur, Lysimachia nummularia, Tamus communis, Galium aparine, Rubus caesius, Ulmus carpinifolia and Ajuga reptans. ANOSIM analysis were used to determine the degree of floristic discontinuity. It was largest between forest of Pedunculate Oak, Hornbeam and Turkey Oak and forest of Pedunculate Oak and Ash (statistics R = 0.8824 (p<0.001)). The lowest floristic dissimilarity was between the forest of Pedunculate Oak, Hornbeam and Turkey Oak and forest of Pedunculate Oak, Hornbeam and Turkey Oak with Lindens, where R = 0.2009 (p<0.01). Posavina floodplain forests in Serbia generally show good agreement with analogous communities in neighbouring countries in the Balkan peninsula and Central Europe. (author)

Concepts for measuring maintenance performance and methods for analysing competing failure modes

International Nuclear Information System (INIS)

Cooke, Roger; Paulsen, Jette

1997-01-01

Measurement of maintenance performance is done on the basis of component history data in which service sojourns are distinguished according to whether they terminate in corrective or preventive maintenance. From the viewpoint of data analysis, corrective and preventive maintenance constitute competing failure nudes. This article examines ways to assess maintenance performance without introducing statistical assumptions, then introduces a plausible statistical model for describing the interaction of preventive and corrective maintenance, and finally illustrates these with examples from the Nordic TUD data system

Monitoring household waste recycling centres performance using mean bin weight analyses.

Science.gov (United States)

Maynard, Sarah; Cherrett, Tom; Waterson, Ben

2009-02-01

This paper describes a modelling approach used to investigate the significance of key factors (vehicle type, compaction type, site design, temporal effects) in influencing the variability in observed nett amenity bin weights produced by household waste recycling centres (HWRCs). This new method can help to quickly identify sites that are producing significantly lighter bins, enabling detailed back-end analyses to be efficiently targeted and best practice in HWRC operation identified. Tested on weigh ticket data from nine HWRCs across West Sussex, UK, the model suggests that compaction technique, vehicle type, month and site design explained 76% of the variability in the observed nett amenity weights. For each factor, a weighting coefficient was calculated to generate a predicted nett weight for each bin transaction and three sites were subsequently identified as having similar characteristics but returned significantly different mean nett bin weights. Waste and site audits were then conducted at the three sites to try and determine the possible sources of the remaining variability. Significant differences were identified in the proportions of contained waste (bagged), wood, and dry recyclables entering the amenity waste stream, particularly at one site where significantly less contaminated waste and dry recyclables were observed.

Optimization of a Centrifugal Boiler Circulating Pump's Casing Based on CFD and FEM Analyses

Directory of Open Access Journals (Sweden)

Zhigang Zuo

2014-04-01

Full Text Available It is important to evaluate the economic efficiency of boiler circulating pumps in manufacturing process from the manufacturers' point of view. The possibility of optimizing the pump casing with respect to structural pressure integrity and hydraulic performance was discussed. CFD analyses of pump models with different pump casing sizes were firstly carried out for the hydraulic performance evaluation. The effects of the working temperature and the sealing ring on the hydraulic efficiency were discussed. A model with casing diameter of 0.875D40 was selected for further analyses. FEM analyses were then carried out on different combinations of casing sizes, casing wall thickness, and materials, to evaluate its safety related to pressure integrity, with respect to both static and fatigue strength analyses. Two models with forging and cast materials were selected as final results.

Overcoming financial barriers to wider use of renewable energy technology in Africa

International Nuclear Information System (INIS)

Davidson, O.R.; Turkson, J.

2001-01-01

Future energy demand in Africa will rise dramatically due to development desires and increased industrial needs. Coping with this demand will pose a serious challenge because of the economic and environmental constraints of the continent. Exploiting its vast renewable energy sources for this purpose will assist greatly, but financial and other barriers to the rapid growth of associated technologies are significant. This paper explores measures that can be implemented to reduce these financial barriers. The analyses, which are based on lessons from experiences in and out of the region, show that replicating and enhancing current initiatives along with the implementation of suggested policy options could substantially increase the use of renewable energy technologies in Africa. (author)

A Roadmap and Discussion of Issues for Physics Analyses Required to Support Plutonium Disposition in VVER-1000 Reactors

International Nuclear Information System (INIS)

Primm, R.T.; Drischler, J.D.; Pavlovichev, A.M.; Styrine, Y.A.

2000-01-01

The purpose of this report is to document the physics analyses that must be performed to successfully disposition weapons-usable plutonium in VVER-1000 reactors in the Russian Federation. The report is a document to support programmatic and financial planning. It does not include documentation of the technical procedures by which physics analyses are performed, nor are the results of any analyses included

A Roadmap and Discussion of Issues for Physics Analyses Required to Support Plutonium Disposition in VVER-1000 Reactors

Energy Technology Data Exchange (ETDEWEB)

Primm, R.T.; Drischler, J.D.; Pavlovichev, A.M. Styrine, Y.A.

2000-06-01

The purpose of this report is to document the physics analyses that must be performed to successfully disposition weapons-usable plutonium in VVER-1000 reactors in the Russian Federation. The report is a document to support programmatic and financial planning. It does not include documentation of the technical procedures by which physics analyses are performed, nor are the results of any analyses included.

Developing countries SMEs innovation characteristics and performance

DEFF Research Database (Denmark)

Vang, Jan; Rezaei, Shahamak; Baklanov, Nikita

An econometric study analysing developing countries’ SMEs innovation characteristics and their correlation with performance.......An econometric study analysing developing countries’ SMEs innovation characteristics and their correlation with performance....

Angular analyses in relativistic quantum mechanics; Analyses angulaires en mecanique quantique relativiste

Energy Technology Data Exchange (ETDEWEB)

Moussa, P [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

1968-06-01

This work describes the angular analysis of reactions between particles with spin in a fully relativistic fashion. One particle states are introduced, following Wigner's method, as representations of the inhomogeneous Lorentz group. In order to perform the angular analyses, the reduction of the product of two representations of the inhomogeneous Lorentz group is studied. Clebsch-Gordan coefficients are computed for the following couplings: l-s coupling, helicity coupling, multipolar coupling, and symmetric coupling for more than two particles. Massless and massive particles are handled simultaneously. On the way we construct spinorial amplitudes and free fields; we recall how to establish convergence theorems for angular expansions from analyticity hypothesis. Finally we substitute these hypotheses to the idea of 'potential radius', which gives at low energy the usual 'centrifugal barrier' factors. The presence of such factors had never been deduced from hypotheses compatible with relativistic invariance. (author) [French] On decrit un formalisme permettant de tenir compte de l'invariance relativiste, dans l'analyse angulaire des amplitudes de reaction entre particules de spin quelconque. Suivant Wigner, les etats a une particule sont introduits a l'aide des representations du groupe de Lorentz inhomogene. Pour effectuer les analyses angulaires, on etudie la reduction du produit de deux representations du groupe de Lorentz inhomogene. Les coefficients de Clebsch-Gordan correspondants sont calcules dans les couplages suivants: couplage l-s couplage d'helicite, couplage multipolaire, couplage symetrique pour plus de deux particules. Les particules de masse nulle et de masse non nulle sont traitees simultanement. Au passage, on introduit les amplitudes spinorielles et on construit les champs libres, on rappelle comment des hypotheses d'analyticite permettent d'etablir des theoremes de convergence pour les developpements angulaires. Enfin on fournit un substitut a la

Current Approaches to Tactical Performance Analyses in Soccer Using Position Data

NARCIS (Netherlands)

Memmert, Daniel; Lemmink, Koen A P M; Sampaio, Jaime

Tactical match performance depends on the quality of actions of individual players or teams in space and time during match-play in order to be successful. Technological innovations have led to new possibilities to capture accurate spatio-temporal information of all players and unravel the dynamics

Optical region elemental abundance analyses of B and A stars

International Nuclear Information System (INIS)

Adelman, S.J.

1984-01-01

Abundance analyses using optical region data and fully line blanketed model atmospheres have been performed for six moderately sharplined middle to late B-type stars. The derived abundances have values similar to those of the Sun. (author)

Wider Professional Experiences: The Value of Pre-Service Teachers Learning in Wider Contexts

Science.gov (United States)

Salter, Peta; Hill, Angela; Navin, Fiona; Knight, Cecily

2013-01-01

Within teacher education, professional standards across Australian jurisdictions consistently note the importance of developing the ability to "engage professionally" with a community (QCT, 2009; AITSL, 2012). Paralleling this however, are calls for more "classroom" time (Australian Government, 2012). This paper explores…

Utilization of Large Scale Surface Models for Detailed Visibility Analyses

Science.gov (United States)

Caha, J.; Kačmařík, M.

2017-11-01

This article demonstrates utilization of large scale surface models with small spatial resolution and high accuracy, acquired from Unmanned Aerial Vehicle scanning, for visibility analyses. The importance of large scale data for visibility analyses on the local scale, where the detail of the surface model is the most defining factor, is described. The focus is not only the classic Boolean visibility, that is usually determined within GIS, but also on so called extended viewsheds that aims to provide more information about visibility. The case study with examples of visibility analyses was performed on river Opava, near the Ostrava city (Czech Republic). The multiple Boolean viewshed analysis and global horizon viewshed were calculated to determine most prominent features and visibility barriers of the surface. Besides that, the extended viewshed showing angle difference above the local horizon, which describes angular height of the target area above the barrier, is shown. The case study proved that large scale models are appropriate data source for visibility analyses on local level. The discussion summarizes possible future applications and further development directions of visibility analyses.

Analyser-based phase contrast image reconstruction using geometrical optics.

Science.gov (United States)

Kitchen, M J; Pavlov, K M; Siu, K K W; Menk, R H; Tromba, G; Lewis, R A

2007-07-21

Analyser-based phase contrast imaging can provide radiographs of exceptional contrast at high resolution (geometrical optics are satisfied. Analytical phase retrieval can be performed by fitting the analyser rocking curve with a symmetric Pearson type VII function. The Pearson VII function provided at least a 10% better fit to experimentally measured rocking curves than linear or Gaussian functions. A test phantom, a hollow nylon cylinder, was imaged at 20 keV using a Si(1 1 1) analyser at the ELETTRA synchrotron radiation facility. Our phase retrieval method yielded a more accurate object reconstruction than methods based on a linear fit to the rocking curve. Where reconstructions failed to map expected values, calculations of the Takagi number permitted distinction between the violation of the geometrical optics conditions and the failure of curve fitting procedures. The need for synchronized object/detector translation stages was removed by using a large, divergent beam and imaging the object in segments. Our image acquisition and reconstruction procedure enables quantitative phase retrieval for systems with a divergent source and accounts for imperfections in the analyser.

Methodological Framework for Analysing Cascading Effects from Flood Events: The Case of Sukhumvit Area, Bangkok, Thailand

Directory of Open Access Journals (Sweden)

Geofrey Hilly

2018-01-01

Full Text Available Impacts from floods in urban areas can be diverse and wide ranging. These can include the loss of human life, infrastructure and property damages, as well as other kinds of nuisance and inconvenience to urban life. Hence, the ability to identify and quantify wider ranging effects from floods is of the utmost importance to urban flood managers and infrastructure operators. The present work provides a contribution in this direction and describes a methodological framework for analysing cascading effects from floods that has been applied for the Sukhumvit area in Bangkok (Thailand. It demonstrates that the effects from floods can be much broader in their reach and magnitude than the sole impacts incurred from direct and immediate losses. In Sukhumvit, these include loss of critical services, assets and goods, traffic congestion and delays in transportation, loss of business and income, disturbances and discomfort to the residents, and all these can be traced with the careful analysis of cascading effects. The present work explored the use of different visualization options to present the findings. These include a casual loop diagram, a HAZUR resilience map, a tree diagram and GIS maps.

A Framework for Analysing Corporate Social Performance: beyond the Wood Model

NARCIS (Netherlands)

Pierick, ten E.; Beekman, V.; Weele, van der C.N.; Meeusen-van Onna, M.J.G.; Graaff, de R.P.M.

2004-01-01

Many business organisations put a lot of effort in raising their performance levels in the three dimensions of sustainability - i.e., people, planet, and profit. It is therefore important to measure and weight the effects of their efforts. In this report a framework is presented that is helpful in

Shaping quality: the use of performance polygons for multidimensional presentation and interpretation of qualitative performance data.

Science.gov (United States)

Cook, T M; Coupe, M; Ku, T

2012-06-01

Measuring outcomes and quality in anaesthesia is challenging. In the UK, there is increased focus on these as a result of changes in Department of Health strategy and the imminent introduction of mandatory revalidation for all doctors. A definition of quality may differ according to the observer's standpoint and numerous performance measures may contribute to overall quality. Patients, surgeons, anaesthetic assistants, recovery nurses, managers, and anaesthetic peers are each likely to have their own perspective on 'anaesthetic quality' and would perhaps suggest different metrics to measure it. Speed, efficiency, cost, interpersonal skills, complication rates, patient recorded outcome measures, and satisfaction are all valid as quality measures, but none alone captures anaesthetic quality. Performance data are frequently presented as single-dimension measurements (e.g. pain, postoperative nausea and vomiting, patient satisfaction), but this does not address the fact that two or more domains may be closely related (e.g. use of regional anaesthesia and quality of analgesia) or in opposition (e.g. use of regional anaesthesia and speed). We introduce the concept of a 'performance polygon' as a tool to represent multidimensional performance assessment. This method of data presentation encourages balanced appraisal of anaesthetic quality. Performance polygons may be used to compare individual performance with peers, published outcome norms, trends in performance over time, to explore aspects of team performance and potentially capture data that are required for medical revalidation. Performance polygons enable easy comparison with any relevant data set and are a visual tool that potentially has wider applications in healthcare quality improvement.

Neuronal network analyses: premises, promises and uncertainties

OpenAIRE

Parker, David

2010-01-01

Neuronal networks assemble the cellular components needed for sensory, motor and cognitive functions. Any rational intervention in the nervous system will thus require an understanding of network function. Obtaining this understanding is widely considered to be one of the major tasks facing neuroscience today. Network analyses have been performed for some years in relatively simple systems. In addition to the direct insights these systems have provided, they also illustrate some of the diffic...

Credit Risk Versus Performance in the Romanian Banking System

Directory of Open Access Journals (Sweden)

Sbârcea Ioana Raluca

2017-12-01

Full Text Available The Romanian banking sector, predominantly governed by the capital of foreign banks, is, as well as other international banking sectors, under the sign of the necessary balance that should exist between risk and performance. This is a result of banks trying to take risks that they can control, given that they need to generate financial results that are satisfactory for all categories of bank creditors, namely shareholders, depositors and other lenders. In this paper, I wanted to analyze the risk situation assumed by the main banks in the system versus the performance gained in recent years. This article is part of a wider research, so I will refer only to the main risk assumed by a bank, namely the credit risk, I will highlight the evolution of the indicators of this risk, so that I can finally analyze their degree of correlation with indicators for measuring bank performance. The situation of other financial risks in banking activity will be addressed in other works.

Maintenance Plan for the Performance Assessments and Composite Analyses for the Area 3 and Area 5 Radioactive Waste Management Sites at the Nevada Test Site

International Nuclear Information System (INIS)

V. Yucel

2002-01-01

U.S. Department of Energy (DOE) Order 435.1 requires that performance assessments (PAs) and composite analyses (CAs) for low-level waste (LLW) disposal facilities be maintained by the field offices. This plan describes the activities to be performed in maintaining the Performance Assessment (PA) and Composite Analysis (CA) for the Area 3 and Area 5 Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS). The Disposal Authorization Statement (DAS) for the continuing operations of a LLW facility at the DOE complex specifies the conditions for operations based on approval of a PA and CA, and requires the facility to implement a maintenance program to assure that these conditions will remain protective of the public health and the environment in the future. The goal of the maintenance program is to provide that assurance. The maintenance process is an iterative one in which changing conditions may result in a revision of PA and CA; the revised PA and CA may impose a different set of conditions for facility operation, closure, and postclosure. The maintenance process includes managing uncertainty, performing annual reviews, submitting annual summary reports to DOE Headquarters (DOE/HQ), carrying out special analyses, and revising the PAs and CAs, if necessary. Management of uncertainty is an essential component of the maintenance program because results of the original PAs and CAs are understood to be based on uncertain assumptions about the conceptual models; the mathematical models and parameters; and the future state of the lands, disposal facilities, and human activities. The annual reviews for the PAs include consideration of waste receipts, facility specific factors, results of monitoring, and results of research and development (R and D) activities. Likewise, results of ongoing R and D, changes in land-use planning, new information on known sources of residual radioactive materials, and identification of new sources may warrant an evaluation to

Method of accounting for code safety valve setpoint drift in safety analyses

International Nuclear Information System (INIS)

Rousseau, K.R.; Bergeron, P.A.

1989-01-01

In performing the safety analyses for transients that result in a challenge to the reactor coolant system (RCS) pressure boundary, the general acceptance criterion is that the peak RCS pressure not exceed the American Society of Mechanical Engineers limit of 110% of the design pressure. Without crediting non-safety-grade pressure mitigating systems, protection from this limit is mainly provided by the primary and secondary code safety valves. In theory, the combination of relief capacity and setpoints for these valves is designed to provide this protection. Generally, banks of valves are set at varying setpoints staggered by 15- to 20-psid increments to minimize the number of valves that would open by an overpressure challenge. In practice, however, when these valves are removed and tested (typically during a refueling outage), setpoints are sometimes found to have drifted by >50 psid. This drift should be accounted for during the performance of the safety analysis. This paper describes analyses performed by Yankee Atomic Electric Company (YAEC) to account for setpoint drift in safety valves from testing. The results of these analyses are used to define safety valve operability or acceptance criteria

Health systems performance in sub-Saharan Africa: governance, outcome and equity.

Science.gov (United States)

Olafsdottir, Anna E; Reidpath, Daniel D; Pokhrel, Subhash; Allotey, Pascale

2011-04-16

The literature on health systems focuses largely on the performance of healthcare systems operationalised around indicators such as hospital beds, maternity care and immunisation coverage. A broader definition of health systems however, needs to include the wider determinants of health including, possibly, governance and its relationship to health and health equity. The aim of this study was to examine the relationship between health systems outcomes and equity, and governance as a part of a process to extend the range of indicators used to assess health systems performance. Using cross sectional data from 46 countries in the African region of the World Health Organization, an ecological analysis was conducted to examine the relationship between governance and health systems performance. The data were analysed using multiple linear regression and a standard progressive modelling procedure. The under-five mortality rate (U5MR) was used as the health outcome measure and the ratio of U5MR in the wealthiest and poorest quintiles was used as the measure of health equity. Governance was measured using two contextually relevant indices developed by the Mo Ibrahim Foundation. Governance was strongly associated with U5MR and moderately associated with the U5MR quintile ratio. After controlling for possible confounding by healthcare, finance, education, and water and sanitation, governance remained significantly associated with U5MR. Governance was not, however, significantly associated with equity in U5MR outcomes. This study suggests that the quality of governance may be an important structural determinant of health systems performance, and could be an indicator to be monitored. The association suggests there might be a causal relationship. However, the cross-sectional design, the level of missing data, and the small sample size, forces tentative conclusions. Further research will be needed to assess the causal relationship, and its generalizability beyond U5MR as a health

Health systems performance in sub-Saharan Africa: governance, outcome and equity

Directory of Open Access Journals (Sweden)

Pokhrel Subhash

2011-04-01

Full Text Available Abstract Background The literature on health systems focuses largely on the performance of healthcare systems operationalised around indicators such as hospital beds, maternity care and immunisation coverage. A broader definition of health systems however, needs to include the wider determinants of health including, possibly, governance and its relationship to health and health equity. The aim of this study was to examine the relationship between health systems outcomes and equity, and governance as a part of a process to extend the range of indicators used to assess health systems performance. Methods Using cross sectional data from 46 countries in the African region of the World Health Organization, an ecological analysis was conducted to examine the relationship between governance and health systems performance. The data were analysed using multiple linear regression and a standard progressive modelling procedure. The under-five mortality rate (U5MR was used as the health outcome measure and the ratio of U5MR in the wealthiest and poorest quintiles was used as the measure of health equity. Governance was measured using two contextually relevant indices developed by the Mo Ibrahim Foundation. Results Governance was strongly associated with U5MR and moderately associated with the U5MR quintile ratio. After controlling for possible confounding by healthcare, finance, education, and water and sanitation, governance remained significantly associated with U5MR. Governance was not, however, significantly associated with equity in U5MR outcomes. Conclusion This study suggests that the quality of governance may be an important structural determinant of health systems performance, and could be an indicator to be monitored. The association suggests there might be a causal relationship. However, the cross-sectional design, the level of missing data, and the small sample size, forces tentative conclusions. Further research will be needed to assess the

Mapping the contribution of Allied Health Professions to the wider public health workforce: a rapid review of evidence-based interventions.

Science.gov (United States)

Davis, S Fowler; Enderby, P; Harrop, D; Hindle, L

2017-03-01

The objective was to identify a selection of the best examples of the public health contributions by Allied Health Professionals (AHPs) in order to encourage a wider awareness and participation from that workforce to public health practice. A mapping exercise was used to identify evidence-based interventions that could lead to health improvements across a population. A rapid review was undertaken to identify evidence, followed by a survey of Allied Health Profession (AHP) practitioners and an expert panel consensus method to select the examples of AHP public health interventions. Nine evidence-based interventions are identified and selected as examples of current AHP good practice. These examples represent a contribution to public health and include screening interventions, secondary prevention and risk management. This study contributes to a strategy for AHPs in public health by appraising the effectiveness and impact of some exemplar AHP practices that contribute to health improvement. There is a need for AHPs to measure the impact of their interventions and to demonstrate evidence of outcomes at population level. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Producing the Docile Body: Analysing Local Area Under-Performance Inspection (LAUI)

Science.gov (United States)

Clapham, Andrew

2015-01-01

Sir Michael Wilshaw, the head of the Office for Standards in Education (OfSTED), declared a "new wave" of Local Area Under-performance Inspections (LAUI) of schools "denying children the standard of education they deserve". This paper examines how the threat of LAUI played out over three mathematics lessons taught by a teacher…

High-Resolution Global and Basin-Scale Ocean Analyses and Forecasts

Science.gov (United States)

2009-09-01

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval Research Laboratory,Oceanographic Division,Stennis Space Center,MS,39529-5004 8. PERFORMING... ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT...six weeks, here circling near the center of an anti- cyclonic eddy seen in both analyses. A third drifter is moving southward past Coffs Harbour

Monte Carlo parameter studies and uncertainty analyses with MCNP5

International Nuclear Information System (INIS)

Brown, F. B.; Sweezy, J. E.; Hayes, R.

2004-01-01

A software tool called mcnp p study has been developed to automate the setup, execution, and collection of results from a series of MCNP5 Monte Carlo calculations. This tool provides a convenient means of performing parameter studies, total uncertainty analyses, parallel job execution on clusters, stochastic geometry modeling, and other types of calculations where a series of MCNP5 jobs must be performed with varying problem input specifications. (authors)

Double-crystal analyser system for the PRISMA spectrometer: test of a prototype

International Nuclear Information System (INIS)

Petrillo, C.; Sacchetti, F.; Steigenberger, U.

1993-11-01

A prototype of a double-analyser system has been tested at the ISIS pulsed neutron source in order to determine the performance of such an analysing device in the low energy transfer region. The performance of such a system has been found satisfactory in terms of reflectivity and energy resolution as well as alignment procedures. Based on our test results we propose the construction of a second arm for the PRISMA (PRogetto deol'Istituto di Struttura della MAteria del Consiglio Nazionale delle Ricerche) spectrometer at ISIS. This new arm would enable us to perform measurements with much improved energy resolution and to extend the wavevector transfer range to much smaller values thus improving the instrument performance significantly for magnetic scattering experiments. The new, modular approach of the upgrade will also strengthen the flexibility of the instrument and open up the opportunity for further instrumental developments, for example the introduction of a polarization option. (Author)

VESPA: Very large-scale Evolutionary and Selective Pressure Analyses

Directory of Open Access Journals (Sweden)

Andrew E. Webb

2017-06-01

Full Text Available Background Large-scale molecular evolutionary analyses of protein coding sequences requires a number of preparatory inter-related steps from finding gene families, to generating alignments and phylogenetic trees and assessing selective pressure variation. Each phase of these analyses can represent significant challenges, particularly when working with entire proteomes (all protein coding sequences in a genome from a large number of species. Methods We present VESPA, software capable of automating a selective pressure analysis using codeML in addition to the preparatory analyses and summary statistics. VESPA is written in python and Perl and is designed to run within a UNIX environment. Results We have benchmarked VESPA and our results show that the method is consistent, performs well on both large scale and smaller scale datasets, and produces results in line with previously published datasets. Discussion Large-scale gene family identification, sequence alignment, and phylogeny reconstruction are all important aspects of large-scale molecular evolutionary analyses. VESPA provides flexible software for simplifying these processes along with downstream selective pressure variation analyses. The software automatically interprets results from codeML and produces simplified summary files to assist the user in better understanding the results. VESPA may be found at the following website: http://www.mol-evol.org/VESPA.

Summary of Prometheus Radiation Shielding Nuclear Design Analyses , for information

International Nuclear Information System (INIS)

J. Stephens

2006-01-01

This report transmits a summary of radiation shielding nuclear design studies performed to support the Prometheus project. Together, the enclosures and references associated with this document describe NRPCT (KAPL and Bettis) shielding nuclear design analyses done for the project

A two-channel wave analyser for sounding rockets and satellites

International Nuclear Information System (INIS)

Brondz, E.

1989-04-01

Studies of low frequency electromagnetic waves, produced originally by lightning discharges penetrating the ionosphere, provide an important source of valuable information about the earth's surrounding plasma. Use of rockets and satellites supported by ground-based observations implies, unique opportunity for measuring in situ a number of parameters simultaneously in order to correlate data from various measurements. However, every rocket experiment has to be designed bearing in mind telemetry limitations and/or short flight duration. Typical flight duration for Norwegian rockets launched from Andoeya Rocket Range is 500 to 600 s. Therefore, the most desired way to use a rocket or satellite is to carry out data analyses on board in real time. Recent achievements in Digital Signal Processing (DSP) technology have made it possible to undertake very complex on board data manipulation. As a part of rocket instrumentation, a DSP based unit able to carry out on board analyses of low frequency electromagnetic waves in the ionosphere has been designed. The unit can be seen as a general purpose computer built on the basis of a fixed-point 16 bit signal processor. The unit is supplied with a program code in order to perform wave analyses on two independent channels simultaneously. The analyser is able to perform 256 point complex fast fourier transformations, and it produce a spectral power desity estimate on both channels every 85 ms. The design and construction of the DSP based unit is described and results from the tests are presented

Stuttering, induced fluency, and natural fluency: a hierarchical series of activation likelihood estimation meta-analyses.

Science.gov (United States)

Budde, Kristin S; Barron, Daniel S; Fox, Peter T

2014-12-01

Developmental stuttering is a speech disorder most likely due to a heritable form of developmental dysmyelination impairing the function of the speech-motor system. Speech-induced brain-activation patterns in persons who stutter (PWS) are anomalous in various ways; the consistency of these aberrant patterns is a matter of ongoing debate. Here, we present a hierarchical series of coordinate-based meta-analyses addressing this issue. Two tiers of meta-analyses were performed on a 17-paper dataset (202 PWS; 167 fluent controls). Four large-scale (top-tier) meta-analyses were performed, two for each subject group (PWS and controls). These analyses robustly confirmed the regional effects previously postulated as "neural signatures of stuttering" (Brown, Ingham, Ingham, Laird, & Fox, 2005) and extended this designation to additional regions. Two smaller-scale (lower-tier) meta-analyses refined the interpretation of the large-scale analyses: (1) a between-group contrast targeting differences between PWS and controls (stuttering trait); and (2) a within-group contrast (PWS only) of stuttering with induced fluency (stuttering state). Copyright © 2014 Elsevier Inc. All rights reserved.

Performance analyses of Z-source and quasi Z-source inverter for photovoltaic applications

Science.gov (United States)

Himabind, S.; Priya, T. Hari; Manjeera, Ch.

2018-04-01

This paper presents the comparative analysis of Z-source and Quasi Z-source converter for renewable energy applications. Due to the dependency of renewable energy sources on external weather conditions the output voltage, current changes accordingly which effects the performance of traditional voltage source and current source inverters connected across it. To overcome the drawbacks of VSI and CSI, Z-source and Quasi Z-source inverter (QZSI) are used, which can perform multiple tasks like ac-to-dc, dc-to-ac, ac-to-ac, dc-to-dc conversion. They can be used for both buck and boost operations, by utilizing the shoot-through zero state. The QZSI is derived from the ZSI topology, with a slight change in the impedance network and it overcomes the drawbacks of ZSI. The QZSI draws a constant current from the source when compared to ZSI. A comparative analysis is performed between Z-source and Quasi Z-source inverter, simulation is performed in MATLAB/Simulink environment.

Review of HEDL fuel pin transient analyses analytical programs

International Nuclear Information System (INIS)

Scott, J.H.; Baars, R.E.

1975-05-01

Methods for analysis of transient fuel pin performance are described, as represented by the steady-state SIEX code and the PECT series of codes used for steady-state and transient mechanical analyses. The empirical fuel failure correlation currently in use for analysis of transient overpower accidents is described. (U.S.)

How to Achieve Quality Business Performance in an Organization

Directory of Open Access Journals (Sweden)

Merima Bekri ć

2013-02-01

Full Text Available RQ: The research question is the influence of quality management on quality business performance.Purpose: Determine which top management approaches are essential for business excellence and leadership approaches that achieve quality business.Method: Analysis of articles from the Journal Organization from the last 5 years and one article from the Journal of Universal Excellent to obtain data.Results: Characteristics of managers and individual employees influence the quality of an organization's performance and business excellence. This is rudimentary for an organization to perform successfully. The results show the weaknesses that an organization can improve in.Organization: The research study facilitates in improving long-term success of an organization. The results can assist in further decision-making and timely responses to changes in its internal and external environment.Society: Better business performance contributes to the wider environment, as this also ensures stability of an organization.Originality: A different approach in viewing management issuesand searching for improvements. There are not many review articles on this topic.Limitations: The analysis was conducted with only ten articles.

The effects of working memory on brain-computer interface performance.

Science.gov (United States)

Sprague, Samantha A; McBee, Matthew T; Sellers, Eric W

2016-02-01

The purpose of the present study is to evaluate the relationship between working memory and BCI performance. Participants took part in two separate sessions. The first session consisted of three computerized tasks. The List Sorting Working Memory Task was used to measure working memory, the Picture Vocabulary Test was used to measure general intelligence, and the Dimensional Change Card Sort Test was used to measure executive function, specifically cognitive flexibility. The second session consisted of a P300-based BCI copy-spelling task. The results indicate that both working memory and general intelligence are significant predictors of BCI performance. This suggests that working memory training could be used to improve performance on a BCI task. Working memory training may help to reduce a portion of the individual differences that exist in BCI performance allowing for a wider range of users to successfully operate the BCI system as well as increase the BCI performance of current users. Copyright © 2015 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Seismic fragility analyses

International Nuclear Information System (INIS)

Kostov, Marin

2000-01-01

In the last two decades there is increasing number of probabilistic seismic risk assessments performed. The basic ideas of the procedure for performing a Probabilistic Safety Analysis (PSA) of critical structures (NUREG/CR-2300, 1983) could be used also for normal industrial and residential buildings, dams or other structures. The general formulation of the risk assessment procedure applied in this investigation is presented in Franzini, et al., 1984. The probability of failure of a structure for an expected lifetime (for example 50 years) can be obtained from the annual frequency of failure, β E determined by the relation: β E ∫[d[β(x)]/dx]P(flx)dx. β(x) is the annual frequency of exceedance of load level x (for example, the variable x may be peak ground acceleration), P(fI x) is the conditional probability of structure failure at a given seismic load level x. The problem leads to the assessment of the seismic hazard β(x) and the fragility P(fl x). The seismic hazard curves are obtained by the probabilistic seismic hazard analysis. The fragility curves are obtained after the response of the structure is defined as probabilistic and its capacity and the associated uncertainties are assessed. Finally the fragility curves are combined with the seismic loading to estimate the frequency of failure for each critical scenario. The frequency of failure due to seismic event is presented by the scenario with the highest frequency. The tools usually applied for probabilistic safety analyses of critical structures could relatively easily be adopted to ordinary structures. The key problems are the seismic hazard definitions and the fragility analyses. The fragility could be derived either based on scaling procedures or on the base of generation. Both approaches have been presented in the paper. After the seismic risk (in terms of failure probability) is assessed there are several approaches for risk reduction. Generally the methods could be classified in two groups. The

Robotic sample preparation for radiochemical plutonium and americium analyses

International Nuclear Information System (INIS)

Stalnaker, N.; Beugelsdijk, T.; Thurston, A.; Quintana, J.

1985-01-01

A Zymate robotic system has been assembled and programmed to prepare samples for plutonium and americium analyses by radioactivity counting. The system performs two procedures: a simple dilution procedure and a TTA (xylene) extraction of plutonium. To perform the procedures, the robotic system executes 11 unit operations such as weighing, pipetting, mixing, etc. Approximately 150 programs, which require 64 kilobytes of memory, control the system. The system is now being tested with high-purity plutonium metal and plutonium oxide samples. Our studies indicate that the system can give results that agree within 5% at the 95% confidence level with determinations performed manually. 1 ref., 1 fig., 1 tab

Economical analyses of construction of a biomass boiler house

International Nuclear Information System (INIS)

Normak, A.

2002-01-01

To reduce the energy costs we can use cheaper fuel to fire our boiler. One of the cheapest fuels is wood biomass. It is very actual issue how to use cheaper wood biomass in heat generation to decrease energy costs and to increase biomass share in our energy balance. Before we decide to build biomass boiler house it is recommendable to analyse the economical situation and work out most profitable, efficient, reliable and ecological boiler plant design on particular conditions. The best way to perform the analyses is to use the economical model presented. It saves our time and gives objective evaluation to the project. (author)

Detection of defects of Kenaf/Epoxy by Thermography Analyses

International Nuclear Information System (INIS)

Suriani, M J; Ali, Aidi; Sapuan, S M; Khalina, A; Abdullah, S

2012-01-01

There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95% of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.

Analysing the mechanical performance and growth adaptation of Norway spruce using a non-linear finite-element model and experimental data.

Science.gov (United States)

Lundström, T; Jonas, T; Volkwein, A

2008-01-01

Thirteen Norway spruce [Picea abies (L.) Karst.] trees of different size, age, and social status, and grown under varying conditions, were investigated to see how they react to complex natural static loading under summer and winter conditions, and how they have adapted their growth to such combinations of load and tree state. For this purpose a non-linear finite-element model and an extensive experimental data set were used, as well as a new formulation describing the degree to which the exploitation of the bending stress capacity is uniform. The three main findings were: material and geometric non-linearities play important roles when analysing tree deflections and critical loads; the strengths of the stem and the anchorage mutually adapt to the local wind acting on the tree crown in the forest canopy; and the radial stem growth follows a mechanically high-performance path because it adapts to prevailing as well as acute seasonal combinations of the tree state (e.g. frozen or unfrozen stem and anchorage) and load (e.g. wind and vertical and lateral snow pressure). Young trees appeared to adapt to such combinations in a more differentiated way than older trees. In conclusion, the mechanical performance of the Norway spruce studied was mostly very high, indicating that their overall growth had been clearly influenced by the external site- and tree-specific mechanical stress.

A new approach to analyse longitudinal epidemiological data with an excess of zeros.

Science.gov (United States)

Spriensma, Alette S; Hajos, Tibor R S; de Boer, Michiel R; Heymans, Martijn W; Twisk, Jos W R

2013-02-20

Within longitudinal epidemiological research, 'count' outcome variables with an excess of zeros frequently occur. Although these outcomes are frequently analysed with a linear mixed model, or a Poisson mixed model, a two-part mixed model would be better in analysing outcome variables with an excess of zeros. Therefore, objective of this paper was to introduce the relatively 'new' method of two-part joint regression modelling in longitudinal data analysis for outcome variables with an excess of zeros, and to compare the performance of this method to current approaches. Within an observational longitudinal dataset, we compared three techniques; two 'standard' approaches (a linear mixed model, and a Poisson mixed model), and a two-part joint mixed model (a binomial/Poisson mixed distribution model), including random intercepts and random slopes. Model fit indicators, and differences between predicted and observed values were used for comparisons. The analyses were performed with STATA using the GLLAMM procedure. Regarding the random intercept models, the two-part joint mixed model (binomial/Poisson) performed best. Adding random slopes for time to the models changed the sign of the regression coefficient for both the Poisson mixed model and the two-part joint mixed model (binomial/Poisson) and resulted into a much better fit. This paper showed that a two-part joint mixed model is a more appropriate method to analyse longitudinal data with an excess of zeros compared to a linear mixed model and a Poisson mixed model. However, in a model with random slopes for time a Poisson mixed model also performed remarkably well.

JENDL-3.2 performance in analyses of MISTRAL critical experiments for high-moderation MOX cores

International Nuclear Information System (INIS)

Takada, Naoyuki; Hibi, Koki; Ishii, Kazuya; Ando, Yoshihira; Yamamoto, Toru; Ueji, Masao; Iwata, Yutaka

2001-01-01

NUPEC and CEA have launched an extensive experimental program called MISTRAL to study highly moderated MOX cores for the advanced LWRs. The analyses using SRAC system and MVP code with JENDL-3.2 library are in progress on the experiments of the MISTRAL and the former EPICURE programs. Various comparisons have been made between calculation results and measurement values. (author)

Status on DEMO Helium Cooled Lithium Lead breeding blanket thermo-mechanical analyses

Energy Technology Data Exchange (ETDEWEB)

Aubert, J., E-mail: julien.aubert@cea.fr [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France); Aiello, G.; Jaboulay, J.-C. [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France); Kiss, B. [Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest (Hungary); Morin, A. [CEA-Saclay, DEN, DM2S, F-91191 Gif-sur-Yvette (France)

2016-11-01

Highlights: • CEA with the support of Wigner-RCP and IPP-CR, is in charge of the design of the HCLL blanket for DEMO. The DEMO HCLL breeding blanket design capitalizes on the experience acquired on the HCLL Test Blanket Module designed for ITER. Design improvements are being implemented to adapt the design to DEMO specifications and performance objectives. • Thermal and mechanical analyses have been carried out in order to justify the design of the HCLL breeding blanket showing promising results for tie rods modules’ attachments system and relatively good behavior of the box in case of LOCA when comparing to RCC-MRx criteria. • CFD thermal analyses on generic breeding unit have enabled the consolidation of the results obtained with previous FEM design analyses. - Abstract: The EUROfusion Consortium develops a design of a fusion power demonstrator (DEMO) in the framework of the European “Horizon 2020” innovation and research program. One of the key components in the fusion reactor is the breeding blanket surrounding the plasma, ensuring tritium self-sufficiency, heat removal for conversion into electricity, and neutron shielding. The Helium Cooled Lithium Lead (HCLL) blanket is one of the concepts which is investigated for DEMO. It is made of a Eurofer structure and uses the eutectic liquid lithium–lead as tritium breeder and neutron multiplier, and helium gas as coolant. Within the EUROfusion organization, CEA with the support of Wigner-RCP and IPP-CR, is in charge of the design of the HCLL blanket for DEMO. This paper presents the status of the thermal and mechanical analyses carried out on the HCLL breeding blanket in order to justify the design. CFD thermal analyses on generic breeding unit including stiffening plates and cooling plates have been performed with ANSYS in order to consolidate results obtained with previous FEM design analyses. Moreover in order to expand the justification of the HCLL Breeding blanket design, the most loaded area of

Population aging from 1950 to 2010 in seventeen transitional countries in the wider region of South Eastern Europe

Directory of Open Access Journals (Sweden)

Mihajlo Jakovljevic

2015-12-01

Full Text Available Aim: Population aging has profoundly reshaped demographic landscapes in all South Eastern European (SEE countries. The aim of this study was to provide a thorough comparative inter-country assessment on the speed of population aging in the entire SEE region for the period 1950-2010. Methods: Descriptive observational analysis of long-term trends on core primary and composite indicators of population aging across seventeen countries of the wider SEE region, with panel data sets at a national level. Results: During the past six decades, the entire SEE region has experienced a rapid increase in the median age (from 25.2 years in 1950 to 37.9 years in 2010, with a simultaneous fall of fertility rates for two children per woman (from 3.55 children per each childbearing woman in 1950 to 1.49 in 2010, coupled with significant rise in the population of elderly citizens. The speed of population aging has vastly accelerated (with a 2.5 fold increase over the past three decades. The percentage of individuals over 65 years has doubled from 7% in 1950 to 14% in 2010. Conclusion: Complex national strategies are needed to cope with the shrinking labour force coupled with the growing proportion of the older population. With all likelihood, population aging will further accelerate in the near future. This profound long-term demographic transition will threaten financial sustainability of current health systems in all SEE countries.

The fish and fisheries of Jones Bank and the wider Celtic Sea

Science.gov (United States)

Martinez, I.; Ellis, J. R.; Scott, B.; Tidd, A.

2013-10-01

The Celtic Sea is a diverse fishing ground that supports important commercial fisheries for a range of demersal fish, large and small-bodied pelagic fish and a variety of cephalopods and other shellfish. A regional overview of the main commercial fish stocks of the Celtic Sea and of the fish that occur in the vicinity of Jones Bank are provided through analyses of landings data from English and Welsh vessels, and from scientific trawl surveys. Dedicated smaller scale sampling via trawl surveys combined with baited cameras on and around the Jones Bank were also analysed to investigate the importance of sandbank habitats with attention paid to the differences in the species occurring on the top of the bank in comparison to adjacent off-bank habitats. Official landing statistics for UK (English and Welsh) vessels indicated that the predominant commercial demersal species in ICES Divisions VIIg,h (in terms of quantities landed) were anglerfish, megrim, pollack and skates (Rajidae). There were, however, regional differences in the distribution of fish and fisheries, and the area surrounding Jones Bank (ICES Rectangles 28E1 and 28E2) supports fisheries for megrim, anglerfish, skates, hake, ling and turbot, with otter trawl, gillnet and beam trawl the main gears used. Recent survey data collected with GOV (Grande Ouverture Verticale) trawl from the Celtic Sea (ICES Divisions VIIe-h, 2007-2010) were used to highlight the broad scale distribution of the main fish assemblages in the Celtic Sea. Analyses of the fish and cephalopod catches from these surveys indicated that there were four broad assemblages in the area, including (i) a region around the Cornwall (which will also be partly influenced by the necessity to use rockhopper ground gear on these rough grounds), (ii) the shallower regions of the north-western Celtic Sea (including parts of the Bristol Channel), (iii) the deeper parts of the outer shelf and (iv) the central Celtic Sea. These data also provided

Fourier Transform Mass Spectrometry: The Transformation of Modern Environmental Analyses

Science.gov (United States)

Lim, Lucy; Yan, Fangzhi; Bach, Stephen; Pihakari, Katianna; Klein, David

2016-01-01

Unknown compounds in environmental samples are difficult to identify using standard mass spectrometric methods. Fourier transform mass spectrometry (FTMS) has revolutionized how environmental analyses are performed. With its unsurpassed mass accuracy, high resolution and sensitivity, researchers now have a tool for difficult and complex environmental analyses. Two features of FTMS are responsible for changing the face of how complex analyses are accomplished. First is the ability to quickly and with high mass accuracy determine the presence of unknown chemical residues in samples. For years, the field has been limited by mass spectrometric methods that were based on knowing what compounds of interest were. Secondly, by utilizing the high resolution capabilities coupled with the low detection limits of FTMS, analysts also could dilute the sample sufficiently to minimize the ionization changes from varied matrices. PMID:26784175

Analyses of systems availability and operator actions to support the development of severe accident procedures

International Nuclear Information System (INIS)

Lutz, R.J. Jr.; Scobel, J.H.

1989-01-01

This paper reports on traditional analyses of severe accidents, such as those presented in Probabilistic Risk Assessment (PRA) studies of nuclear power stations, that have generally been performed on the assumption that all means of cooling the reactor core are lost and that no operator actions to mitigate the consequences or progression of the severe accident are performed. The assumption to neglect the availability of safety systems and operator actions which do not prevent core melting can lead to erroneous conclusions regarding the plant severer accident profile. Recent work in severe accident management has identified the need to perform analyses which consider all systems availabilities and operator actions, irrespective of their contribution to the prevention of core melting. These new analyses indicate that the traditional analyses result in overfly pessimistic predictions of the time of core melting and the subsequent potential for recovery of core cooling prior to core melting. Additionally, since the traditional analyses do not model all of the operator actions which are prescribed, the impact of additional severe accident operator actions on the progression and consequences of the accident cannot be reliably identified. Further, the more detailed analysis can change the focus of the importance of various system to the prevention of core damage and the mitigation of severe accident consequences. Finally, the simplicity of the traditional analyses can have a considerable impact on severe accident decision making, particularly in the evaluation of alternate plant design features and the priorities for research studies

A three-dimensional analyses of fluid flow and heat transfer for moderator integrity assessment in PHWR

International Nuclear Information System (INIS)

Bang, K. H.; Lee, J. Y.; Yoo, S. O.; Kim, M. W.; Kim, H. J.

2002-01-01

Three-dimensional analyses of fluid flow and heat transfer has been performed in this study. The simulation of SPEL experimental work and comparison with experimental data has been carried out to verify the analyses models. Moreover, to verify the CANDU-6 reactor type, analyses of fluid flow and heat transfer in the calandria under the condition of steady state has been performed using FLUENT code, which is the conventional code for a three-dimensional analyses of fluid flow and heat transfer for moderator integrity assessment in PHWR thermal-hydraulics. It is found that the maximum temperature in the moderator is 347K (74 ), so that the moderator has the enough subcoolability to ensure the integrity of pressure tube during LOCA conditions

An analyser for power plant operations

International Nuclear Information System (INIS)

Rogers, A.E.; Wulff, W.

1990-01-01

Safe and reliable operation of power plants is essential. Power plant operators need a forecast of what the plant will do when its current state is disturbed. The in-line plant analyser provides precisely this information at relatively low cost. The plant analyser scheme uses a mathematical model of the dynamic behaviour of the plant to establish a numerical simulation. Over a period of time, the simulation is calibrated with measurements from the particular plant in which it is used. The analyser then provides a reference against which to evaluate the plant's current behaviour. It can be used to alert the operator to any atypical excursions or combinations of readings that indicate malfunction or off-normal conditions that, as the Three Mile Island event suggests, are not easily recognised by operators. In a look-ahead mode, it can forecast the behaviour resulting from an intended change in settings or operating conditions. Then, when such changes are made, the plant's behaviour can be tracked against the forecast in order to assure that the plant is behaving as expected. It can be used to investigate malfunctions that have occurred and test possible adjustments in operating procedures. Finally, it can be used to consider how far from the limits of performance the elements of the plant are operating. Then by adjusting settings, the required power can be generated with as little stress as possible on the equipment. (6 figures) (Author)

Analyser-based phase contrast image reconstruction using geometrical optics

International Nuclear Information System (INIS)

Kitchen, M J; Pavlov, K M; Siu, K K W; Menk, R H; Tromba, G; Lewis, R A

2007-01-01

Analyser-based phase contrast imaging can provide radiographs of exceptional contrast at high resolution (<100 μm), whilst quantitative phase and attenuation information can be extracted using just two images when the approximations of geometrical optics are satisfied. Analytical phase retrieval can be performed by fitting the analyser rocking curve with a symmetric Pearson type VII function. The Pearson VII function provided at least a 10% better fit to experimentally measured rocking curves than linear or Gaussian functions. A test phantom, a hollow nylon cylinder, was imaged at 20 keV using a Si(1 1 1) analyser at the ELETTRA synchrotron radiation facility. Our phase retrieval method yielded a more accurate object reconstruction than methods based on a linear fit to the rocking curve. Where reconstructions failed to map expected values, calculations of the Takagi number permitted distinction between the violation of the geometrical optics conditions and the failure of curve fitting procedures. The need for synchronized object/detector translation stages was removed by using a large, divergent beam and imaging the object in segments. Our image acquisition and reconstruction procedure enables quantitative phase retrieval for systems with a divergent source and accounts for imperfections in the analyser

The validity of using ROC software for analysing visual grading characteristics data: an investigation based on the novel software VGC analyzer

International Nuclear Information System (INIS)

Hansson, Jonny; Maansson, Lars Gunnar; Baath, Magnus

2016-01-01

The purpose of the present work was to investigate the validity of using single-reader-adapted receiver operating characteristics (ROC) software for analysis of visual grading characteristics (VGC) data. VGC data from four published VGC studies on optimisation of X-ray examinations, previously analysed using ROCFIT, were reanalysed using a recently developed software dedicated to VGC analysis (VGC Analyzer), and the outcomes [the mean and 95 % confidence interval (CI) of the area under the VGC curve (AUC VGC ) and the p-value] were compared. The studies included both paired and non-paired data and were reanalysed both for the fixed-reader and the random-reader situations. The results showed good agreement between the softwares for the mean AUC VGC . For non-paired data, wider CIs were obtained with VGC Analyzer than previously reported, whereas for paired data, the previously reported CIs were similar or even broader. Similar observations were made for the p-values. The results indicate that the use of single-reader-adapted ROC software such as ROCFIT for analysing non-paired VGC data may lead to an increased risk of committing Type I errors, especially in the random-reader situation. On the other hand, the use of ROC software for analysis of paired VGC data may lead to an increased risk of committing Type II errors, especially in the fixed-reader situation. (authors)

A Server-Client-Based Graphical Development Environment for Physics Analyses (VISPA)

International Nuclear Information System (INIS)

Bretz, H-P; Erdmann, M; Fischer, R; Hinzmann, A; Klingebiel, D; Komm, M; Müller, G; Rieger, M; Steffens, J; Steggemann, J; Urban, M; Winchen, T

2012-01-01

The Visual Physics Analysis (VISPA) project provides a graphical development environment for data analysis. It addresses the typical development cycle of (re-)designing, executing, and verifying an analysis. We present the new server-client-based web application of the VISPA project to perform physics analyses via a standard internet browser. This enables individual scientists to work with a large variety of devices including touch screens, and teams of scientists to share, develop, and execute analyses on a server via the web interface.

Sequence analyses and 3D structure prediction of two Type III ...

African Journals Online (AJOL)

Internet

2012-04-17

Apr 17, 2012 ... analyses were performed using the sequence data of growth hormone gene (gh) ... used as a phylogenetic marker for different taxonomic ..... structural changes have been observed in some parts of ..... of spatial restraints.

Phylogenomic analyses data of the avian phylogenomics project

DEFF Research Database (Denmark)

Jarvis, Erich D; Mirarab, Siavash; Aberer, Andre J

2015-01-01

BACKGROUND: Determining the evolutionary relationships among the major lineages of extant birds has been one of the biggest challenges in systematic biology. To address this challenge, we assembled or collected the genomes of 48 avian species spanning most orders of birds, including all Neognathae...... and two of the five Palaeognathae orders. We used these genomes to construct a genome-scale avian phylogenetic tree and perform comparative genomic analyses. FINDINGS: Here we present the datasets associated with the phylogenomic analyses, which include sequence alignment files consisting of nucleotides......ML algorithm or when using statistical binning with the coalescence-based MP-EST algorithm (which we refer to as MP-EST*). Other data sets, such as the coding sequence of some exons, revealed other properties of genome evolution, namely convergence. CONCLUSIONS: The Avian Phylogenomics Project is the largest...

Using uncertainty and sensitivity analyses in socioecological agent-based models to improve their analytical performance and policy relevance.

Science.gov (United States)

Ligmann-Zielinska, Arika; Kramer, Daniel B; Spence Cheruvelil, Kendra; Soranno, Patricia A

2014-01-01

Agent-based models (ABMs) have been widely used to study socioecological systems. They are useful for studying such systems because of their ability to incorporate micro-level behaviors among interacting agents, and to understand emergent phenomena due to these interactions. However, ABMs are inherently stochastic and require proper handling of uncertainty. We propose a simulation framework based on quantitative uncertainty and sensitivity analyses to build parsimonious ABMs that serve two purposes: exploration of the outcome space to simulate low-probability but high-consequence events that may have significant policy implications, and explanation of model behavior to describe the system with higher accuracy. The proposed framework is applied to the problem of modeling farmland conservation resulting in land use change. We employ output variance decomposition based on quasi-random sampling of the input space and perform three computational experiments. First, we perform uncertainty analysis to improve model legitimacy, where the distribution of results informs us about the expected value that can be validated against independent data, and provides information on the variance around this mean as well as the extreme results. In our last two computational experiments, we employ sensitivity analysis to produce two simpler versions of the ABM. First, input space is reduced only to inputs that produced the variance of the initial ABM, resulting in a model with output distribution similar to the initial model. Second, we refine the value of the most influential input, producing a model that maintains the mean of the output of initial ABM but with less spread. These simplifications can be used to 1) efficiently explore model outcomes, including outliers that may be important considerations in the design of robust policies, and 2) conduct explanatory analysis that exposes the smallest number of inputs influencing the steady state of the modeled system.

Using uncertainty and sensitivity analyses in socioecological agent-based models to improve their analytical performance and policy relevance.

Directory of Open Access Journals (Sweden)

Arika Ligmann-Zielinska

Full Text Available Agent-based models (ABMs have been widely used to study socioecological systems. They are useful for studying such systems because of their ability to incorporate micro-level behaviors among interacting agents, and to understand emergent phenomena due to these interactions. However, ABMs are inherently stochastic and require proper handling of uncertainty. We propose a simulation framework based on quantitative uncertainty and sensitivity analyses to build parsimonious ABMs that serve two purposes: exploration of the outcome space to simulate low-probability but high-consequence events that may have significant policy implications, and explanation of model behavior to describe the system with higher accuracy. The proposed framework is applied to the problem of modeling farmland conservation resulting in land use change. We employ output variance decomposition based on quasi-random sampling of the input space and perform three computational experiments. First, we perform uncertainty analysis to improve model legitimacy, where the distribution of results informs us about the expected value that can be validated against independent data, and provides information on the variance around this mean as well as the extreme results. In our last two computational experiments, we employ sensitivity analysis to produce two simpler versions of the ABM. First, input space is reduced only to inputs that produced the variance of the initial ABM, resulting in a model with output distribution similar to the initial model. Second, we refine the value of the most influential input, producing a model that maintains the mean of the output of initial ABM but with less spread. These simplifications can be used to 1 efficiently explore model outcomes, including outliers that may be important considerations in the design of robust policies, and 2 conduct explanatory analysis that exposes the smallest number of inputs influencing the steady state of the modeled system.

[Clinical research XXIII. From clinical judgment to meta-analyses].

Science.gov (United States)

Rivas-Ruiz, Rodolfo; Castelán-Martínez, Osvaldo D; Pérez-Rodríguez, Marcela; Palacios-Cruz, Lino; Noyola-Castillo, Maura E; Talavera, Juan O

2014-01-01

Systematic reviews (SR) are studies made in order to ask clinical questions based on original articles. Meta-analysis (MTA) is the mathematical analysis of SR. These analyses are divided in two groups, those which evaluate the measured results of quantitative variables (for example, the body mass index -BMI-) and those which evaluate qualitative variables (for example, if a patient is alive or dead, or if he is healing or not). Quantitative variables generally use the mean difference analysis and qualitative variables can be performed using several calculations: odds ratio (OR), relative risk (RR), absolute risk reduction (ARR) and hazard ratio (HR). These analyses are represented through forest plots which allow the evaluation of each individual study, as well as the heterogeneity between studies and the overall effect of the intervention. These analyses are mainly based on Student's t test and chi-squared. To take appropriate decisions based on the MTA, it is important to understand the characteristics of statistical methods in order to avoid misinterpretations.

Introduction: Analysing Emotion and Theorising Affect

Directory of Open Access Journals (Sweden)

Peta Tait

2016-08-01

Full Text Available This discussion introduces ideas of emotion and affect for a volume of articles demonstrating the scope of approaches used in their study within the humanities and creative arts. The volume offers multiple perspectives on emotion and affect within 20th-century and 21st-century texts, arts and organisations and their histories. The discussion explains how emotion encompasses the emotions, emotional feeling, sensation and mood and how these can be analysed particularly in relation to literature, art and performance. It briefly summarises concepts of affect theory within recent approaches before introducing the articles.

Method to perform radioimmunological analyses

International Nuclear Information System (INIS)

Friedel, R.

1976-01-01

The invention concerns a method for the radioimmunoligcal detection of antigens. According to the invention, antibodies are adsorbed on water-insoluble high-polymeric compounds on the inner surfaces of a capillary device, a labelled antigen is then added and, following incubation, suching off of the test mixture and washing of the coated surfaces, the latter is measured for radioactivity. (VJ) [de

When size matters: attention affects performance by contrast or response gain.

Science.gov (United States)

Herrmann, Katrin; Montaser-Kouhsari, Leila; Carrasco, Marisa; Heeger, David J

2010-12-01

Covert attention, the selective processing of visual information in the absence of eye movements, improves behavioral performance. We found that attention, both exogenous (involuntary) and endogenous (voluntary), can affect performance by contrast or response gain changes, depending on the stimulus size and the relative size of the attention field. These two variables were manipulated in a cueing task while stimulus contrast was varied. We observed a change in behavioral performance consonant with a change in contrast gain for small stimuli paired with spatial uncertainty and a change in response gain for large stimuli presented at one location (no uncertainty) and surrounded by irrelevant flanking distracters. A complementary neuroimaging experiment revealed that observers' attention fields were wider with than without spatial uncertainty. Our results support important predictions of the normalization model of attention and reconcile previous, seemingly contradictory findings on the effects of visual attention.

The impact of IAS 36 on goodwill disclosure: Evidence of the write-offs and performance effects

Directory of Open Access Journals (Sweden)

Gabriele D'Alauro

2013-09-01

Full Text Available Purpose: This paper aims at examining the quality of corporate disclosure about goodwill impairment and its relationship with goodwill write-offs and earnings performance, exploiting an accounting regulation that allows significant unverifiable estimates whilst requires a high level of information.Design/methodology/approach: This study, based on a sample of Italian and British firms with market indications of goodwill impairment, verifies through a both univariate and multivariate analysis whether the level of disclosure is positively related to the magnitude of goodwill write-off and to earnings performance, using a self-constructed score of mandatory disclosure about goodwill impairment tests in accordance with IAS 36 requirements.Findings: In a general context of insufficient information, we find that for Italian firms both the magnitude of goodwill write-offs and earnings performance are significantly and positively associated to the level of mandatory disclosure about goodwill impairment tests. For the British firms, as companies more used to impairment test rules, the data does not confirm any significant association.Research limitations/implications: The objective of this study is to test the initial impact of IAS 36 in the first years of its application, selecting a sample of firms belonging to limited but significant activity sectors. Future research could usefully analyse a wider sample of firms, also extending the time period of analysis. In any case, the findings of our study are consistent with the insights of earnings management theory, suggesting that the subjectivity inherent in impairment test assumptions could be used opportunistically by managers.Originality/value: This research investigates questions still relatively unexplored, concerning the effects of goodwill write-offs and accounting performance on corporate disclosure about goodwill impairment test. Based on this analysis, the study shows that corporate disclosure

MCNP benchmark analyses of critical experiments for the Space Nuclear Thermal Propulsion program

International Nuclear Information System (INIS)

Selcow, E.C.; Cerbone, R.J.; Ludewig, H.; Mughabghab, S.F.; Schmidt, E.; Todosow, M.; Parma, E.J.; Ball, R.M.; Hoovler, G.S.

1993-01-01

Benchmark analyses have been performed of Particle Bed Reactor (PBR) critical experiments (CX) using the MCNP radiation transport code. The experiments have been conducted at the Sandia National Laboratory reactor facility in support of the Space Nuclear Thermal Propulsion (SNTP) program. The test reactor is a nineteen element water moderated and reflected thermal system. A series of integral experiments have been carried out to test the capabilities of the radiation transport codes to predict the performance of PBR systems. MCNP was selected as the preferred radiation analysis tool for the benchmark experiments. Comparison between experimental and calculational results indicate close agreement. This paper describes the analyses of benchmark experiments designed to quantify the accuracy of the MCNP radiation transport code for predicting the performance characteristics of PBR reactors

MCNP benchmark analyses of critical experiments for the Space Nuclear Thermal Propulsion program

Science.gov (United States)

Selcow, Elizabeth C.; Cerbone, Ralph J.; Ludewig, Hans; Mughabghab, Said F.; Schmidt, Eldon; Todosow, Michael; Parma, Edward J.; Ball, Russell M.; Hoovler, Gary S.

1993-01-01

Benchmark analyses have been performed of Particle Bed Reactor (PBR) critical experiments (CX) using the MCNP radiation transport code. The experiments have been conducted at the Sandia National Laboratory reactor facility in support of the Space Nuclear Thermal Propulsion (SNTP) program. The test reactor is a nineteen element water moderated and reflected thermal system. A series of integral experiments have been carried out to test the capabilities of the radiation transport codes to predict the performance of PBR systems. MCNP was selected as the preferred radiation analysis tool for the benchmark experiments. Comparison between experimental and calculational results indicate close agreement. This paper describes the analyses of benchmark experiments designed to quantify the accuracy of the MCNP radiation transport code for predicting the performance characteristics of PBR reactors.

Soft QCD and pA physics, with a focus on the ridge at LHCb

CERN Multimedia

Dreimanis, Karlis

2016-01-01

The LHCb experiment is a forward spectrometer originally designed for study of b and c hadron decays. However, it can be used in a much wider spectrum of physics analyses. The poster presented here highlights a few studies from the extensive range of soft QCD and heavy-ion physics analyses performed at the LHCb. A particular emphasis is placed on the observation of the two-particle angular correlations, so-called ridge effect, in the forward region. The results presented here serve as one of numerous examples of LHCb being a proven multi-purpose detector in the forward region.

Certification of a uranium dioxide reference material for chemical analyses

International Nuclear Information System (INIS)

Le Duigou, Y.

1984-01-01

This report, issued by the Central Bureau for Nuclear Measurements (CBNM), describes the characterization of a uranium dioxide reference material with accurately determined uranium mass fraction for chemical analyses. The preparation, conditioning, homogeneity tests and the analyses performed on this material are described in Annex 1. The evaluation of the individual impurity results, total of impurities and uranium mass fraction are given in Annex 2. Information on a direct determination of uranium by titration is given in Annex 3. The uranium mass fraction (881.34+-0.13) g.kg -1 calculated in Annex 2 is given on the certificate

Design and manufacture of TL analyser by using the microcomputer

International Nuclear Information System (INIS)

Doh, Sih Hong; Woo, Chong Ho

1986-01-01

This paper describes the design of the thermoluminescence analyser using microcomputer. TL analyser is designed to perform the three step heat treatment, such as pre-read heating, readout procedure and post-heating (or pre-irradiation ) anneal. We used a 12-bit A/D converter to get the precise measurement and the phase control method to control the heating temperature. Since the used Apple II microcomputer is cheap and popular, it is possible to design the economical system. Experimental results showed the successful operation with flexibility. The error of temperature control was less than ± 0.2% of the expected value. (Author)

Assessment of CONTAIN and MELCOR for performing LOCA and LOVA analyses in ITER

International Nuclear Information System (INIS)

Merrill, B.J.; Hagrman, D.L.; Gaeta, M.J.; Petti, D.A.

1994-09-01

This report describes the results of an assessment of the CONTAIN and MELCOR computer codes for ITER LOCA and LOVA applications. As part of the assessment, the results of running a test problem that describes an ITER LOCA are presented. It is concluded that the MELCOR code should be the preferred code for ITER severe accident thermal hydraulic analyses. This code will require the least modification to be appropriate for calculating thermal hydraulic behavior in ITER relevant conditions that include vacuum, cryogenics, ITER temperatures, and the presence of a liquid metal test module. The assessment of the aerosol transport models in these codes concludes that several modifications would have to be made to CONTAIN and/or MELCOR to make them applicable to the aerosol transport part of severe accident analysis in ITER

Multicentre evaluation of the new ORTHO VISION® analyser.

Science.gov (United States)

Lazarova, E; Scott, Y; van den Bos, A; Wantzin, P; Atugonza, R; Solkar, S; Carpio, N

2017-10-01

Implementation of fully automated analysers has become a crucial security step in the blood bank; it reduces human errors, allows standardisation and improves turnaround time (TAT). We aimed at evaluating the ease of use and the efficiency of the ORTHO VISION ® Analyser (VISION) in comparison to the ORTHO AutoVue ® Innova System (AutoVue) in six different laboratories. After initial training and system configuration, VISION was used in parallel to AutoVue following the daily workload, both automates being based on ORTHO BioVue ® System column agglutination technology. Each participating laboratory provided data and scored the training, system configuration, quality control, maintenance and system efficiency. A total of 1049 individual samples were run: 266 forward and reverse grouping and antibody screens with 10 urgent samples, 473 ABD forward grouping and antibody screens with 22 urgent samples, 160 ABD forward grouping, 42 antibody screens and a series of 108 specific case profiles. The VISION instrument was more rapid than the AutoVue with a mean performing test time of 27·9 min compared to 36 min; for various test type comparisons, the TAT data obtained from VISION was shorter than that from AutoVue. Moreover, VISION analysed urgent STAT samples faster. Regarding the ease of use, VISION was intuitive and user friendly. VISION is a robust, reproducible system performing the most types of analytical determinations needed for pre-transfusion testing today, thus accommodating a wide range of clinical needs. VISION brings appreciated new features that could further secure blood transfusions. © 2017 The Authors. Transfusion Medicine published by John Wiley & Sons Ltd on behalf of British Blood Transfusion Society.

Multivariate analyses of crater parameters and the classification of craters

Science.gov (United States)

Siegal, B. S.; Griffiths, J. C.

1974-01-01

Multivariate analyses were performed on certain linear dimensions of six genetic types of craters. A total of 320 craters, consisting of laboratory fluidization craters, craters formed by chemical and nuclear explosives, terrestrial maars and other volcanic craters, and terrestrial meteorite impact craters, authenticated and probable, were analyzed in the first data set in terms of their mean rim crest diameter, mean interior relief, rim height, and mean exterior rim width. The second data set contained an additional 91 terrestrial craters of which 19 were of experimental percussive impact and 28 of volcanic collapse origin, and which was analyzed in terms of mean rim crest diameter, mean interior relief, and rim height. Principal component analyses were performed on the six genetic types of craters. Ninety per cent of the variation in the variables can be accounted for by two components. Ninety-nine per cent of the variation in the craters formed by chemical and nuclear explosives is explained by the first component alone.

Comparative biochemical analyses of venous blood and peritoneal fluid from horses with colic using a portable analyser and an in-house analyser.

Science.gov (United States)

Saulez, M N; Cebra, C K; Dailey, M

2005-08-20

Fifty-six horses with colic were examined over a period of three months. The concentrations of glucose, lactate, sodium, potassium and chloride, and the pH of samples of blood and peritoneal fluid, were determined with a portable clinical analyser and with an in-house analyser and the results were compared. Compared with the in-house analyser, the portable analyser gave higher pH values for blood and peritoneal fluid with greater variability in the alkaline range, and lower pH values in the acidic range, lower concentrations of glucose in the range below 8.3 mmol/l, and lower concentrations of lactate in venous blood in the range below 5 mmol/l and in peritoneal fluid in the range below 2 mmol/l, with less variability. On average, the portable analyser underestimated the concentrations of lactate and glucose in peritoneal fluid in comparison with the in-house analyser. Its measurements of the concentrations of sodium and chloride in peritoneal fluid had a higher bias and were more variable than the measurements in venous blood, and its measurements of potassium in venous blood and peritoneal fluid had a smaller bias and less variability than the measurements made with the in-house analyser.

Fourier Transform Mass Spectrometry: The Transformation of Modern Environmental Analyses

Directory of Open Access Journals (Sweden)

Lucy Lim

2016-01-01

Full Text Available Unknown compounds in environmental samples are difficult to identify using standard mass spectrometric methods. Fourier transform mass spectrometry (FTMS has revolutionized how environmental analyses are performed. With its unsurpassed mass accuracy, high resolution and sensitivity, researchers now have a tool for difficult and complex environmental analyses. Two features of FTMS are responsible for changing the face of how complex analyses are accomplished. First is the ability to quickly and with high mass accuracy determine the presence of unknown chemical residues in samples. For years, the field has been limited by mass spectrometric methods that were based on knowing what compounds of interest were. Secondly, by utilizing the high resolution capabilities coupled with the low detection limits of FTMS, analysts also could dilute the sample sufficiently to minimize the ionization changes from varied matrices.

Scenario evolution: Interaction between event tree construction and numerical analyses

International Nuclear Information System (INIS)

Barr, G.E.; Barnard, R.W.; Dockery, H.A.; Dunn, E.; MacIntyre, A.T.

1991-01-01

Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Even tree construction is the method that is being used to develop potential failure scenarios for the proposed nuclear waste repository at Yucca Mountain. An event tree begins with an initial event or condition. Subsequent events are listed in a sequence, leading eventually to release of radionuclides to the accessible environment. Ensuring the validity of the scenarios requires iteration between problems constructed using scenarios contained in the event tree sequence, experimental results, and numerical analyses. Details not adequately captured within the tree initially may become more apparent as a result of analyses. To illustrate this process, we discuss the iterations used to develop numerical analyses for PACE-90 using basaltic igneous activity and human-intrusion event trees

High-performance hybrid Orbitrap mass spectrometers for quantitative proteome analysis

DEFF Research Database (Denmark)

Williamson, James C; Edwards, Alistair V G; Verano-Braga, Thiago

2016-01-01

We present basic workups and quantitative comparisons for two current generation Orbitrap mass spectrometers, the Q Exactive Plus and Orbitrap Fusion Tribrid, which are widely considered two of the highest performing instruments on the market. We assessed the performance of two quantitative methods...... on both instruments, namely label-free quantitation and stable isotope labeling using isobaric tags, for studying the heat shock response in Escherichia coli. We investigated the recently reported MS3 method on the Fusion instrument and the potential of MS3-based reporter ion isolation Synchronous...... Precursor Selection (SPS) and its impact on quantitative accuracy. We confirm that the label-free approach offers a more linear response with a wider dynamic range than MS/MS-based isobaric tag quantitation and that the MS3/SPS approach alleviates but does not eliminate dynamic range compression. We...

Concepts for measuring maintenance performance and methods for analysing competing failure modes

DEFF Research Database (Denmark)

Cooke, R.; Paulsen, J.L.

1997-01-01

competing failure modes. This article examines ways to assess maintenance performance without introducing statistical assumptions, then introduces a plausible statistical model for describing the interaction of preventive and corrective maintenance, and finally illustrates these with examples from...

Structural and Treatment Analyses of Safe and At-Risk Behaviors and Postures Performed by Pharmacy Employees

Science.gov (United States)

Fante, Rhiannon; Gravina, Nicole; Betz, Alison; Austin, John

2010-01-01

This study employed structural and treatment analyses to determine factors that contributed to wrist posture safety in a small pharmacy. The pharmacy was located on a university campus and participants were three female pharmacy technicians. These particular employees had experienced various repetitive-motion injuries that resulted in a total of…

Statistical parameters of random heterogeneity estimated by analysing coda waves based on finite difference method

Science.gov (United States)

Emoto, K.; Saito, T.; Shiomi, K.

2017-12-01

Short-period (2 s) seismograms. We found that the energy of the coda of long-period seismograms shows a spatially flat distribution. This phenomenon is well known in short-period seismograms and results from the scattering by small-scale heterogeneities. We estimate the statistical parameters that characterize the small-scale random heterogeneity by modelling the spatiotemporal energy distribution of long-period seismograms. We analyse three moderate-size earthquakes that occurred in southwest Japan. We calculate the spatial distribution of the energy density recorded by a dense seismograph network in Japan at the period bands of 8-16 s, 4-8 s and 2-4 s and model them by using 3-D finite difference (FD) simulations. Compared to conventional methods based on statistical theories, we can calculate more realistic synthetics by using the FD simulation. It is not necessary to assume a uniform background velocity, body or surface waves and scattering properties considered in general scattering theories. By taking the ratio of the energy of the coda area to that of the entire area, we can separately estimate the scattering and the intrinsic absorption effects. Our result reveals the spectrum of the random inhomogeneity in a wide wavenumber range including the intensity around the corner wavenumber as P(m) = 8πε2a3/(1 + a2m2)2, where ε = 0.05 and a = 3.1 km, even though past studies analysing higher-frequency records could not detect the corner. Finally, we estimate the intrinsic attenuation by modelling the decay rate of the energy. The method proposed in this study is suitable for quantifying the statistical properties of long-wavelength subsurface random inhomogeneity, which leads the way to characterizing a wider wavenumber range of spectra, including the corner wavenumber.

Development of the evaluation methods in reactor safety analyses and core characteristics

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

In order to support the safety reviews by NRA on reactor safety design including the phenomena with multiple failures, the computer codes are developed and the safety evaluations with analyses are performed in the areas of thermal hydraulics and core characteristics evaluation. In the code preparation of safety analyses, the TRACE and RELAP5 code were prepared to conduct the safety analyses of LOCA and beyond design basis accidents with multiple failures. In the core physics code preparation, the functions of sensitivity and uncertainty analysis were incorporated in the lattice physics code CASMO-4. The verification of improved CASMO-4 /SIMULATE-3 was continued by using core physics data. (author)

Analyses of expected rod performance during the dry storage of spent fuel

International Nuclear Information System (INIS)

Einziger, R.E.

1982-08-01

Within the next ten years, a number of utilities will be forced to increase their interim spent-fuel-storage capability or face the loss of full-core reserve. Dry storage is being considered to fill this need. This paper analyzes the fuel-rod-performance data supporting dry storage and discusses areas where there are still outstanding questions. Three storage temperature ranges (T 0 C, 250 0 C 0 C and T > 400 0 C), two atmospheres (inert, unlimited air) and two initial fuel-rod conditions (intact, breached) are considered. It is concluded that a fuel-performance data base exists that indicates that storage below 250 0 C can be accomplished with long-term fuel pellet and cladding stability. At higher temperatures, analytic studies and laboratory experiments are needed especially to extrapolate and interpret the result of demonstration tests. 2 figures, 2 tables

Tracking career performance of successful triathletes.

Science.gov (United States)

Malcata, Rita M; Hopkins, Will G; Pearson, Simon N

2014-06-01

Tracking athletes' performances over time is important but problematic for sports with large environmental effects. Here we have developed career performance trajectories for elite triathletes, investigating changes in swim, cycle, run stages, and total performance times while accounting for environmental and other external factors. Performance times of 337 female and 427 male triathletes competing in 419 international races between 2000 and 2012 were obtained from triathlon.org. Athletes were categorized according to any top 16 placing at World Championships or Olympics between 2008 and 2012. A mixed linear model accounting for race distance (sprint and Olympic), level of competition, calendar-year trend, athlete's category, and clustering of times within athletes and races was used to derive athletes' individual quadratic performance trajectories. These trajectories provided estimates of age of peak performance and predictions for the 2012 London Olympic Games. By markedly reducing the scatter of individual race times, the model produced well-fitting trajectories suitable for comparison of triathletes. Trajectories for top 16 triathletes showed different patterns for race stages and differed more among women than among men, but ages of peak total performance were similar for men and women (28 ± 3 yr, mean ± SD). Correlations between observed and predicted placings at Olympics were slightly higher than those provided by placings in races before the Olympics. Athletes' trajectories will help identify talented athletes and their weakest and strongest stages. The wider range of trajectories among women should be taken into account when setting talent identification criteria. Trajectories offer a small advantage over usual race placings for predicting men's performance. Further refinements, such as accounting for individual responses to race conditions, may improve utility of performance trajectories.

A review of significant events analysed in general practice: implications for the quality and safety of patient care

Directory of Open Access Journals (Sweden)

Bradley Nick

2009-09-01

Full Text Available Abstract Background Significant event analysis (SEA is promoted as a team-based approach to enhancing patient safety through reflective learning. Evidence of SEA participation is required for appraisal and contractual purposes in UK general practice. A voluntary educational model in the west of Scotland enables general practitioners (GPs and doctors-in-training to submit SEA reports for feedback from trained peers. We reviewed reports to identify the range of safety issues analysed, learning needs raised and actions taken by GP teams. Method Content analysis of SEA reports submitted in an 18 month period between 2005 and 2007. Results 191 SEA reports were reviewed. 48 described patient harm (25.1%. A further 109 reports (57.1% outlined circumstances that had the potential to cause patient harm. Individual 'error' was cited as the most common reason for event occurrence (32.5%. Learning opportunities were identified in 182 reports (95.3% but were often non-specific professional issues not shared with the wider practice team. 154 SEA reports (80.1% described actions taken to improve practice systems or professional behaviour. However, non-medical staff were less likely to be involved in the changes resulting from event analyses describing patient harm (p Conclusion The study provides some evidence of the potential of SEA to improve healthcare quality and safety. If applied rigorously, GP teams and doctors in training can use the technique to investigate and learn from a wide variety of quality issues including those resulting in patient harm. This leads to reported change but it is unclear if such improvement is sustained.

The Fluid Dynamical Performance of the Carpentier-Edwards PERIMOUNT Magna Ease Prosthesis

Directory of Open Access Journals (Sweden)

Philipp Marx

2018-01-01

Full Text Available The aim of the present in vitro study was the evaluation of the fluid dynamical performance of the Carpentier-Edwards PERIMOUNT Magna Ease depending on the prosthetic size (21, 23, and 25 mm and the cardiac output (3.6–6.4 L/min. A self-constructed flow channel in combination with particle image velocimetry (PIV enabled precise results with high reproducibility, focus on maximal and local peek velocities, strain, and velocity gradients. These flow parameters allow insights into the generation of forces that act on blood cells and the aortic wall. The results showed that the 21 and 23 mm valves have a quite similar performance. Maximal velocities were 3.03±0.1 and 2.87±0.13 m/s; maximal strain Exx, 913.81±173.25 and 896.15±88.16 1/s; maximal velocity gradient Eyx, 1203.14±221.84 1/s and 1200.81±61.83 1/s. The 25 mm size revealed significantly lower values: maximal velocity, 2.47±0.15 m/s; maximal strain Exx, 592.98±155.80 1/s; maximal velocity gradient Eyx, 823.71±38.64 1/s. In summary, the 25 mm Magna Ease was able to create a wider, more homogenous flow with lower peak velocities especially for higher flow rates. Despite the wider flow, the velocity values close to the aortic walls did not exceed the level of the smaller valves.

Performance Assessment and Sensitivity Analyses of Disposal of Plutonium as Can-in-Canister Ceramic

International Nuclear Information System (INIS)

Rainer Senger

2001-01-01

The purpose of this analysis is to examine whether there is a justification for using high-level waste (HLW) as a surrogate for plutonium disposal in can-in-canister ceramic in the total-system performance assessment (TSPA) model for the Site Recommendation (SR). In the TSPA-SR model, the immobilized plutonium waste form is not explicitly represented, but is implicitly represented as an equal number of canisters of HLW. There are about 50 metric tons of plutonium in the U. S. Department of Energy inventory of surplus fissile material that could be disposed. Approximately 17 tons of this material contain significant quantities of impurities and are considered unsuitable for mixed-oxide (MOX) reactor fuel. This material has been designated for direct disposal by immobilization in a ceramic waste form and encapsulating this waste form in high-level waste (HLW). The remaining plutonium is suitable for incorporation into MOX fuel assemblies for commercial reactors (Shaw 1999, Section 2). In this analysis, two cases of immobilized plutonium disposal are analyzed, the 17-ton case and the 13-ton case (Shaw et al. 2001, Section 2.2). The MOX spent-fuel disposal is not analyzed in this report. In the TSPA-VA (CRWMS M and O 1998a, Appendix B, Section B-4), the calculated dose release from immobilized plutonium waste form (can-in-canister ceramic) did not exceed that from an equivalent amount of HLW glass. This indicates that the HLW could be used as a surrogate for the plutonium can-in-canister ceramic. Representation of can-in-canister ceramic as a surrogate is necessary to reduce the number of waste forms in the TSPA model. This reduction reduces the complexity and running time of the TSPA model and makes the analyses tractable. This document was developed under a Technical Work Plan (CRWMS M and O 2000a), and is compliant with that plan. The application of the Quality Assurance (QA) program to the development of that plan (CRWMS M and O 2000a) and of this Analysis is

Application of pathways analyses for site performance prediction for the Gas Centrifuge Enrichment Plant and Oak Ridge Central Waste Disposal Facility

International Nuclear Information System (INIS)

Pin, F.G.; Oblow, E.M.

1984-01-01

The suitability of the Gas Centrifuge Enrichment Plant and the Oak Ridge Central Waste Disposal Facility for shallow-land burial of low-level radioactive waste is evaluated using pathways analyses. The analyses rely on conservative scenarios to describe the generation and migration of contamination and the potential human exposure to the waste. Conceptual and numerical models are developed using data from comprehensive laboratory and field investigations and are used to simulate the long-term transport of contamination to man. Conservatism is built into the analyses when assumptions concerning future events have to be made or when uncertainties concerning site or waste characteristics exist. Maximum potential doses to man are calculated and compared to the appropriate standards. The sites are found to provide adequate buffer to persons outside the DOE reservations. Conclusions concerning site capacity and site acceptability are drawn. In reaching these conclusions, some consideration is given to the uncertainties and conservatisms involved in the analyses. Analytical methods to quantitatively assess the probability of future events to occur and the sensitivity of the results to data uncertainty may prove useful in relaxing some of the conservatism built into the analyses. The applicability of such methods to pathways analyses is briefly discussed. 18 refs., 9 figs

Analyses of hypothetical FCI's in a fast reactor

International Nuclear Information System (INIS)

Padilla, A. Jr.; Martin, F.J.; Niccoli, L.G.

1981-01-01

Parametric analyses using the SIMMER code were performed to evaluate the potential for a severe recriticality from a pressure-driven recompaction caused by an energetic FCI during the transition phase of a hypothetical accident in a fast reactor. For realistic and reasonable estimates for the assumed accident conditions, a severe recriticality was not predicted. The conditions under which a severe recriticality would be obtained or averted were identified. 10 figures, 2 tables

MCNP benchmark analyses of critical experiments for space nuclear thermal propulsion

International Nuclear Information System (INIS)

Selcow, E.C.; Cerbone, R.J.; Ludewig, H.

1993-01-01

The particle-bed reactor (PBR) system is being developed for use in the Space Nuclear Thermal Propulsion (SNTP) Program. This reactor system is characterized by a highly heterogeneous, compact configuration with many streaming pathways. The neutronics analyses performed for this system must be able to accurately predict reactor criticality, kinetics parameters, material worths at various temperatures, feedback coefficients, and detailed fission power and heating distributions. The latter includes coupled axial, radial, and azimuthal profiles. These responses constitute critical inputs and interfaces with the thermal-hydraulics design and safety analyses of the system

Homeopathy: meta-analyses of pooled clinical data.

Science.gov (United States)

Hahn, Robert G

2013-01-01

In the first decade of the evidence-based era, which began in the mid-1990s, meta-analyses were used to scrutinize homeopathy for evidence of beneficial effects in medical conditions. In this review, meta-analyses including pooled data from placebo-controlled clinical trials of homeopathy and the aftermath in the form of debate articles were analyzed. In 1997 Klaus Linde and co-workers identified 89 clinical trials that showed an overall odds ratio of 2.45 in favor of homeopathy over placebo. There was a trend toward smaller benefit from studies of the highest quality, but the 10 trials with the highest Jadad score still showed homeopathy had a statistically significant effect. These results challenged academics to perform alternative analyses that, to demonstrate the lack of effect, relied on extensive exclusion of studies, often to the degree that conclusions were based on only 5-10% of the material, or on virtual data. The ultimate argument against homeopathy is the 'funnel plot' published by Aijing Shang's research group in 2005. However, the funnel plot is flawed when applied to a mixture of diseases, because studies with expected strong treatments effects are, for ethical reasons, powered lower than studies with expected weak or unclear treatment effects. To conclude that homeopathy lacks clinical effect, more than 90% of the available clinical trials had to be disregarded. Alternatively, flawed statistical methods had to be applied. Future meta-analyses should focus on the use of homeopathy in specific diseases or groups of diseases instead of pooling data from all clinical trials. © 2013 S. Karger GmbH, Freiburg.

Neutronic analyses and tools development efforts in the European DEMO programme

Energy Technology Data Exchange (ETDEWEB)

Fischer, U., E-mail: ulrich.fischer@kit.edu [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Bachmann, C. [European Fusion Development Agreement (EFDA), Garching (Germany); Bienkowska, B. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Catalan, J.P. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Drozdowicz, K.; Dworak, D. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Leichtle, D. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Fusion for Energy (F4E), Barcelona (Spain); Lengar, I. [MESCS-JSI, Ljubljana (Slovenia); Jaboulay, J.-C. [CEA, DEN, Saclay, DM2S, SERMA, F-91191 Gif-sur-Yvette (France); Lu, L. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Moro, F. [Associazione ENEA-Euratom, ENEA Fusion Division, Frascati (Italy); Mota, F. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Sanz, J. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Szieberth, M. [Budapest University of Technology and Economics (BME), Budapest (Hungary); Palermo, I. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Pampin, R. [Fusion for Energy (F4E), Barcelona (Spain); Porton, M. [Euratom/CCFE Fusion Association, Culham Science Centre for Fusion Energy (CCFE), Culham (United Kingdom); Pereslavtsev, P. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Ogando, F. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Rovni, I. [Budapest University of Technology and Economics (BME), Budapest (Hungary); and others

2014-10-15

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools.

Neutronic analyses and tools development efforts in the European DEMO programme

International Nuclear Information System (INIS)

Fischer, U.; Bachmann, C.; Bienkowska, B.; Catalan, J.P.; Drozdowicz, K.; Dworak, D.; Leichtle, D.; Lengar, I.; Jaboulay, J.-C.; Lu, L.; Moro, F.; Mota, F.; Sanz, J.; Szieberth, M.; Palermo, I.; Pampin, R.; Porton, M.; Pereslavtsev, P.; Ogando, F.; Rovni, I.

2014-01-01

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools

Development of generic soil profiles and soil data development for SSI analyses

Energy Technology Data Exchange (ETDEWEB)

Parker, Josh, E-mail: jparker@nuscalepower.com [NuScale Power, 1000 NE Circle Boulevard, Suite 10310, Corvallis, OR 97330 (United States); Khan, Mohsin; Rajagopal, Raj [ARES Corporation, 1990N California Boulevard, Suite 500, Walnut Creek, CA 94596 (United States); Groome, John [NuScale Power, 1000 NE Circle Boulevard, Suite 10310, Corvallis, OR 97330 (United States)

2014-04-01

This paper presents the approach to developing generic soil profiles for the design of reactor building for small modular reactor (SMR) nuclear power plant developed by NuScale Power. The reactor building is a deeply embedded structure. In order to perform soil structure interaction (SSI) analyses, generic soil profiles are required to be defined for the standardized Nuclear Power Plant (NPP) designs for the United States Nuclear Regulatory Commission (NRC) in a design control document (DCD). The development of generic soil profiles is based on utilization of information on generic soil profiles from the new standardized nuclear power plant designs already submitted to the NRC for license certification. Eleven generic soil profiles have been recommended, and those profiles cover a wide range of parameters such as soil depth, shear wave velocity, unit weight, Poisson's ratio, water table, and depth to rock strata. The soil profiles are developed for a range of shear wave velocities between bounds of 1000 fps and 8000 fps as inferred from NRC Standard Review Plan (NUREG 0800) Sections 3.7.1 and 3.7.2. To account for the soil degradation due to seismic events, the strain compatible soil properties are based on the EPRI generic soil degradation curves. In addition, one dimensional soil dynamic response analyses were performed to study the soil layer input motions for performing the SSI analyses.

Longitudinal Data Analyses Using Linear Mixed Models in SPSS: Concepts, Procedures and Illustrations

Directory of Open Access Journals (Sweden)

Daniel T. L. Shek

2011-01-01

Full Text Available Although different methods are available for the analyses of longitudinal data, analyses based on generalized linear models (GLM are criticized as violating the assumption of independence of observations. Alternatively, linear mixed models (LMM are commonly used to understand changes in human behavior over time. In this paper, the basic concepts surrounding LMM (or hierarchical linear models are outlined. Although SPSS is a statistical analyses package commonly used by researchers, documentation on LMM procedures in SPSS is not thorough or user friendly. With reference to this limitation, the related procedures for performing analyses based on LMM in SPSS are described. To demonstrate the application of LMM analyses in SPSS, findings based on six waves of data collected in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes in Hong Kong are presented.

Longitudinal data analyses using linear mixed models in SPSS: concepts, procedures and illustrations.

Science.gov (United States)

Shek, Daniel T L; Ma, Cecilia M S

2011-01-05

Although different methods are available for the analyses of longitudinal data, analyses based on generalized linear models (GLM) are criticized as violating the assumption of independence of observations. Alternatively, linear mixed models (LMM) are commonly used to understand changes in human behavior over time. In this paper, the basic concepts surrounding LMM (or hierarchical linear models) are outlined. Although SPSS is a statistical analyses package commonly used by researchers, documentation on LMM procedures in SPSS is not thorough or user friendly. With reference to this limitation, the related procedures for performing analyses based on LMM in SPSS are described. To demonstrate the application of LMM analyses in SPSS, findings based on six waves of data collected in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes) in Hong Kong are presented.

VIPRE modeling of VVER-1000 reactor core for DNB analyses

Energy Technology Data Exchange (ETDEWEB)

Sung, Y.; Nguyen, Q. [Westinghouse Electric Corporation, Pittsburgh, PA (United States); Cizek, J. [Nuclear Research Institute, Prague, (Czech Republic)

1995-09-01

Based on the one-pass modeling approach, the hot channels and the VVER-1000 reactor core can be modeled in 30 channels for DNB analyses using the VIPRE-01/MOD02 (VIPRE) code (VIPRE is owned by Electric Power Research Institute, Palo Alto, California). The VIPRE one-pass model does not compromise any accuracy in the hot channel local fluid conditions. Extensive qualifications include sensitivity studies of radial noding and crossflow parameters and comparisons with the results from THINC and CALOPEA subchannel codes. The qualifications confirm that the VIPRE code with the Westinghouse modeling method provides good computational performance and accuracy for VVER-1000 DNB analyses.

Design basis event consequence analyses for the Yucca Mountain project

International Nuclear Information System (INIS)

Orvis, D.D.; Haas, M.N.; Martin, J.H.

1997-01-01

Design basis event (DBE) definition and analysis is an ongoing and integrated activity among the design and analysis groups of the Yucca Mountain Project (YMP). DBE's are those that potentially lead to breach of the waste package and waste form (e.g., spent fuel rods) with consequent release of radionuclides to the environment. A Preliminary Hazards Analysis (PHA) provided a systematic screening of external and internal events that were candidate DBE's that will be subjected to analyses for radiological consequences. As preparation, pilot consequence analyses for the repository subsurface and surface facilities have been performed to define the methodology, data requirements, and applicable regulatory limits

Analysing Music with Point-Set Compression Algorithms

DEFF Research Database (Denmark)

Meredith, David

2016-01-01

Several point-set pattern-discovery and compression algorithms designed for analysing music are reviewed and evaluated. Each algorithm takes as input a point-set representation of a score in which each note is represented as a point in pitch-time space. Each algorithm computes the maximal...... and sections in pieces of classical music. On the first task, the best-performing algorithms achieved success rates of around 84%. In the second task, the best algorithms achieved mean F1 scores of around 0.49, with scores for individual pieces rising as high as 0.71....

Analysing sensory panel performance in a proficiency test using the PanelCheck software

DEFF Research Database (Denmark)

Tomic, O.; Luciano, G.; Nilsen, A.

2010-01-01

Check software, a workflow is proposed that guides the user through the data analysis process. This allows practitioners and non-statisticians to get an overview over panel performances in a rapid manner without the need to be familiar with details on the statistical methods. Visualisation of data analysis...... results plays an important role as this provides a time saving and efficient way of screening and investigating sensory panel performances. Most of the statistical methods used in this paper are available in the open source software PanelCheck, which may be downloaded and used for free....

A Macroscopic Performance Analysis of NASA’s Northrop Grumman RQ-4A

Directory of Open Access Journals (Sweden)

Enric Pastor

2018-01-01

Full Text Available This paper presents the process of identification, from a macroscopic point of view, of the Northrop Grumman RQ-4A Global Hawk Remote-Piloted Aircraft System from real, but limited flight information. Performance parameters and operational schemes will be extracted by analyzing available data from two specific science flights flown by the Global Hawk back in 2010. Each phase of the flight, take-off, climb, cruise climb, descent and landing, is analyzed from various points of view: speed profile, altitude, climb/descent ratios and rate of turn. The key performance parameters derived from individual flights will be confirmed by performing a wider statistical validation with additional flight trajectories. Derived data are exploited to validate a simulated RQ-4A vehicle employed in extensive real-time air traffic management simulated integration exercises and to complement the development of a future RQ-4A trajectory predictor.

Behavior of underclad cracks in reactor pressure vessels - evaluation of mechanical analyses with tests on cladded mock-ups

International Nuclear Information System (INIS)

Moinereau, D.; Rousselier, G.; Bethmont, M.

1993-01-01

Innocuity of underclad flaws in the reactor pressure vessels must be demonstrated in the French safety analyses, particularly in the case of a severe transient at the end of the pressure vessel lifetime, because of the radiation embrittlement of the vessel material. Safety analyses are usually performed with elastic and elasto-plastic analyses taking into account the effect of the stainless steel cladding. EDF has started a program including experiments on large size cladded specimens and their interpretations. The purpose of this program is to evaluate the different methods of fracture analysis used in safety studies. Several specimens made of ferritic steel A508 C1 3 with stainless steel cladding, containing small artificial defects, are loaded in four-point bending. Experiments are performed at very low temperature to simulate radiation embrittlement and to obtain crack instability by cleavage fracture. Three tests have been performed on mock-ups containing a small underclad crack (with depth about 5 mn) and a fourth test has been performed on one mock-up with a larger crack (depth about 13 mn). In each case, crack instability occurred by cleavage fracture in the base metal, without crack arrest, at a temperature of about - 170 deg C. Each test is interpreted using linear elastic analysis and elastic-plastic analysis by two-dimensional finite element computations. The fracture are conservatively predicted: the stress intensity factors deduced from the computations (K cp or K j ) are always greater than the base metal toughness. The comparison between the elastic analyses (including two plasticity corrections) and the elastic-plastic analyses shows that the elastic analyses are often conservative. The beneficial effect of the cladding in the analyses is also shown : the analyses are too conservative if the cladding effects is not taken into account. (authors). 9 figs., 6 tabs., 10 refs

Transient analyses for lead–bismuth cooled accelerator-driven system

International Nuclear Information System (INIS)

Sugawara, Takanori; Nishihara, Kenji; Tsujimoto, Kazufumi

2013-01-01

Highlights: ► The transient analyses for the LBE cooled accelerator-driven system were performed. ► The purpose was to investigate the possibility of the core damage. ► All results except the protected loss of heat sink satisfied the no-damage criteria. - Abstract: The transient analyses for the lead–bismuth cooled Accelerator-Driven System (ADS) were performed with the use of the SIMMER-III and RELAP5/mod3.2 codes to investigate the possibility of the core damage. Five accidents; the beam window breakage, the protected loss of heat sink, the beam overpower, the unprotected loss of flow and the unprotected blockage accident were analyzed as the typical accidents in the ADS. Through these calculations, it was confirmed that all calculation results except the protected loss of heat sink satisfied the no-damage criteria. In the protected loss of heat sink, the cladding tube temperature reached at the melting temperature after 20 h although the calculation condition was very conservative. It is required to design a safety system of the ADS to decrease the frequencies of the accidents and to ease the accidents

Uncertainty Analysis of a Fractured Reservoir’s Performance: A Case Study Analyse d’incertitudes des performances d’un réservoir fracturé : étude de cas

Directory of Open Access Journals (Sweden)

Khosravi M.

2012-05-01

Full Text Available In recent years, the oil industry has given great importance to reservoir management and reservoir uncertainty analysis. The development of a method that can model and quantify uncertainties in reservoir simulation studies in an efficient and practical way is clearly desirable. Different approaches such as Response Surface Methodology (RSM and Monte-Carlo simulation have been used to address the uncertainties. In this paper, response surface method is used to realize the most influential parameters on pressure drop and recovery factor changes, regarding their practical levels of uncertainties during the development of fractured reservoir model. The present approach is performed to magnify the significant parameters and developing compatible and more realistic proxy equation for forecasting oil recovery from a typical low permeable fractured reservoir. The proxy model allows Monte-Carlo analysis to determine sensitivities and the quantification of the impact of uncertainty on production forecasts. Results indicate that the oil recovery is more sensitive to aquifer strength, fracture permeability and block height. In addition, however the interaction between other parameters, such as matrix size, fracture permeability and aquifer volume, showed a degree of importance during this analysis. Monte-Carlo analysis forecasts wide range of oil recovery for this field development. Ces dernières années, l’industrie du pétrole a accordé une grande importance à la gestion et à l’analyse d’incertitudes des réservoirs. Le développement d’une méthode permettant de modéliser et de quantifier les incertitudes au cours des études de simulation de réservoir d’une façon efficace et pratique est clairement souhaitable. Des approches différentes telles que la méthodologie des surfaces de réponse (RSM; Response Surface Methodology et la simulation de Monte-Carlo ont été utilisées pour évaluer les incertitudes. Au sein de cet article, la m

Summary of dynamic analyses of the advanced neutron source reactor inner control rods

International Nuclear Information System (INIS)

Hendrich, W.R.

1995-08-01

A summary of the structural dynamic analyses that were instrumental in providing design guidance to the Advanced Neutron source (ANS) inner control element system is presented in this report. The structural analyses and the functional constraints that required certain performance parameters were combined to shape and guide the design effort toward a prediction of successful and reliable control and scram operation to be provided by these inner control rods

Overcooling transient selection and thermal hydraulic analyses of the Loviisa PTS assessments

Energy Technology Data Exchange (ETDEWEB)

Tuomisto, H [IVO Power Engineering Ltd, Vantaa (Finland)

1997-09-01

This paper describes transients selection and thermal hydraulic analyses of various PTS assessment studies performed for the pressure vessels of the Loviisa WWER-reactors. Deterministic analyses have been performed in various stages of the PTS studies and they have always made the formal basis for design and licensing of the reactor pressure vessel. The integrated, probabilistic PTS study was carried out to give an overview of the severity of all different PTS sequences, and give a quantitative estimate of the importance of the PTS issues in relation to the overall safety of the plant. Later, the sequences including external flooding of the pressure vessels were added to the PTS assessment. Thermal recovery annealing of the Loviisa 1 reactor pressure vessel took place during refuelling outage in 1996. (author). 10 refs, 4 figs, 3 tabs.

High-performance execution of psychophysical tasks with complex visual stimuli in MATLAB

Science.gov (United States)

Asaad, Wael F.; Santhanam, Navaneethan; McClellan, Steven

2013-01-01

Behavioral, psychological, and physiological experiments often require the ability to present sensory stimuli, monitor and record subjects' responses, interface with a wide range of devices, and precisely control the timing of events within a behavioral task. Here, we describe our recent progress developing an accessible and full-featured software system for controlling such studies using the MATLAB environment. Compared with earlier reports on this software, key new features have been implemented to allow the presentation of more complex visual stimuli, increase temporal precision, and enhance user interaction. These features greatly improve the performance of the system and broaden its applicability to a wider range of possible experiments. This report describes these new features and improvements, current limitations, and quantifies the performance of the system in a real-world experimental setting. PMID:23034363

Investigating and analysing the energy and environmental performance of an experimental green roof system installed in a nursery school building in Athens, Greece

Energy Technology Data Exchange (ETDEWEB)

Santamouris, M.; Pavlou, C.; Doukas, P.; Synnefa, A.; Hatzibiros, A. [University of Athens, (Greece). Department of Physics, Division of Applied Physics, Laboratory of Meteorology; Mihalakakou, G. [University of Ioannina, Agrinion (Greece). Department of Environment and Natural Resources Management; Patargias, P. [University of Peloponnesus, Kalamata (Greece). Faculty of Human Sciences and Cultural Studies, Department of History, Archaeology and Cultural Heritage Management

2007-09-15

This paper deals with the experimental investigation and analysis of the energy and environmental performance of a green roof system installed in a nursery school building in Athens. The investigation was implemented in two phases. During the first phase, an experimental investigation of the green roof system efficiency was presented and analysed, while in the second one the energy savings was examined through a mathematical approach by calculating both the cooling and heating load for the summer and winter period for the whole building as well as for its top floor. The energy performance evaluation showed a significant reduction of the building's cooling load during summer. This reduction varied for the whole building in the range of 6-49% and for its last floor in the range of 12-87%. Moreover, the influence of the green roof system in the building's heating load was found insignificant, and this can be regarded a great advantage of the system as any interference in the building shell for the reduction of cooling load leads usually to the increase of its heating load. (author)

Systems Performance Analyses of Alaska Wind-Diesel Projects; Kotzebue, Alaska (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

Baring-Gould, I.

2009-04-01

This fact sheet summarizes a systems performance analysis of the wind-diesel project in Kotzebue, Alaska. Data provided for this project include wind turbine output, average wind speed, average net capacity factor, and optimal net capacity factor based on Alaska Energy Authority wind data, estimated fuel savings, and wind system availability.

Comparison of the performance of the next generation of optical interferometers

Science.gov (United States)

Pisani, Marco; Yacoot, Andrew; Balling, Petr; Bancone, Nicola; Birlikseven, Cengiz; Çelik, Mehmet; Flügge, Jens; Hamid, Ramiz; Köchert, Paul; Kren, Petr; Kuetgens, Ulrich; Lassila, Antti; Bartolo Picotto, Gian; Şahin, Ersoy; Seppä, Jeremias; Tedaldi, Matthew; Weichert, Christoph

2012-08-01

Six European National Measurement Institutes (NMIs) have joined forces within the European Metrology Research Programme funded project NANOTRACE to develop the next generation of optical interferometers having a target uncertainty of 10 pm. These are needed for NMIs to provide improved traceable dimensional metrology that can be disseminated to the wider nanotechnology community, thereby supporting the growth in nanotechnology. Several approaches were followed in order to develop the interferometers. This paper briefly describes the different interferometers developed by the various partners and presents the results of a comparison of performance of the optical interferometers using an x-ray interferometer to generate traceable reference displacements.

Thermal analyses of the IF-300 shipping cask

International Nuclear Information System (INIS)

Meier, J.K.

1978-07-01

In order to supply temperature data for structural testing and analysis of shipping casks, a series of thermal analyses using the TRUMP thermal analyzer program were performed on the GE IF-300 spent fuel shipping cask. Major conclusions of the analyses are: (1) Under normal cooling conditions and a cask heat load of 262,000 BTU/h, the seal area of the cask will be roughly 100 0 C (180 0 F) above the ambient surroundings. (2) Under these same conditions the uranium shield at the midpoint of the cask will be between 69 0 C (125 0 F) and 92 0 C (166 0 F) above the ambient surroundings. (3) Significant thermal gradients are not likely to develop between the head studs and the surrounding metal. (4) A representative time constant for the cask as a whole is on the order of one day

Validation of chemical analyses of atmospheric deposition in forested European sites

Directory of Open Access Journals (Sweden)

Erwin ULRICH

2005-08-01

Full Text Available Within the activities of the Integrated Co-operative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests and of the EU Regulation 2152/2003, a Working Group on Quality Assurance/Quality Control of analyses has been created to assist the participating laboratories in the analysis of atmospheric deposition, soil and soil solution, and leaves/needles. As part of the activity of the WG, this study is a statistical analysis in the field of water analysis of chemical concentrations and relationships between ions, and between conductivity and ions for different types of samples (bulk or wet-only samples, throughfall, stemflow considered in forest studies. About 5000 analyses from seven laboratories were used to establish relationships representative of different European geographic and climatic situations, from northern Finland to southern Italy. Statistically significant differences between the relationships obtained from different types of solutions, interacting with different types of vegetation (throughfall and stemflow samples, broad-leaved trees and conifers and with varying influence of marine salt were tested. The ultimate aim is to establish general relationships between ions, and between conductivity and ions, with relative confidence limits, which can be used as a comparison with those established in single laboratories. The use of such techniques is strongly encouraged in the ICPF laboratories to validate single chemical analyses, to be performed when it is still possible to replicate the analysis, and as a general overview of the whole set of analyses, to obtain an indication of the laboratory performance on a long-term basis.

Passive safety injection experiments and analyses (PAHKO)

International Nuclear Information System (INIS)

Tuunanen, J.

1998-01-01

PAHKO project involved experiments on the PACTEL facility and computer simulations of selected experiments. The experiments focused on the performance of Passive Safety Injection Systems (PSIS) of Advanced Light Water Reactors (ALWRs) in Small Break Loss-Of-Coolant Accident (SBLOCA) conditions. The PSIS consisted of a Core Make-up Tank (CMT) and two pipelines (Pressure Balancing Line, PBL, and Injection Line, IL). The examined PSIS worked efficiently in SBLOCAs although the flow through the PSIS stopped temporarily if the break was very small and the hot water filled the CMT. The experiments demonstrated the importance of the flow distributor in the CMT to limit rapid condensation. The project included validation of three thermal-hydraulic computer codes (APROS, CATHARE and RELAP5). The analyses showed the codes are capable to simulate the overall behaviour of the transients. The detailed analyses of the results showed some models in the codes still need improvements. Especially, further development of models for thermal stratification, condensation and natural circulation flow with small driving forces would be necessary for accurate simulation of the PSIS phenomena. (orig.)

Design factors analyses of second-loop PRHRS

Directory of Open Access Journals (Sweden)

ZHANG Hongyan

2017-05-01

Full Text Available In order to study the operating characteristics of a second-loop Passive Residual Heat Removal System (PRHRS, the transient thermal analysis code RELAP5 is used to build simulation models of the main coolant system and second-loop PRHRS. Transient calculations and comparative analyses under station blackout accident and one-side feed water line break accident conditions are conducted for three critical design factors of the second-loop PRHRS:design capacity, emergency makeup tank and isolation valve opening speed. The impacts of the discussed design factors on the operating characteristics of the second-loop PRHRS are summarized based on calculations and analyses. The analysis results indicate that the system safety and cooling rate should be taken into consideration in designing PRHRS's capacity,and water injection from emergency makeup tank to steam generator can provide advantage to system cooling in the event of accident,and system startup performance can be improved by reducing the opening speed of isolation valve. The results can provide references for the design of the second-loop PRHRS in nuclear power plants.

Photon propagation in heterogeneous optical media with spatial correlations: enhanced mean-free-paths and wider-than-exponential free-path distributions

International Nuclear Information System (INIS)

Davis, A.B.; Marshak, Alexander

2004-01-01

Beer's law of exponential decay in direct transmission is well-known but its break-down in spatially variable optical media has been discussed only sporadically in the literature. We document here this break-down in three-dimensional (3D) media with complete generality and explore its ramifications for photon propagation. We show that effective transmission laws and their associated free-path distributions (FPDs) are in fact never exactly exponential in variable media of any kind. Moreover, if spatial correlations in the extinction field extend at least to the scale of the mean-free-path (MFP), FPDs are necessarily wider-than-exponential in the sense that all higher-order moments of the relevant mean-field FPDs exceed those of the exponential FPD, even if it is tuned to yield the proper MFP. The MFP itself is always larger than the inverse of average extinction in a variable medium. In a vast and important class of spatially-correlated random media, the MFP is indeed the average of the inverse of extinction. We translate these theoretical findings into a practical method for deciding a priori when 3D effects become important. Finally, we discuss an obvious but limited analogy between our analysis of spatial variability and the well-known effects of strong spectral variability in gaseous media when observed or modeled at moderate resolution

Analysis of Factors Influencing Building Refurbishment Project Performance

Directory of Open Access Journals (Sweden)

Ishak Nurfadzillah

2018-01-01

Full Text Available Presently, the refurbishment approach becomes favourable as it creates opportunities to incorporate sustainable value with other building improvement. In this regard, this approach needs to be implemented due to the issues on overwhelming ratio of existing building to new construction, which also can contribute to the environmental problem. Refurbishment principles imply to minimize the environmental impact and upgrading the performance of an existing building to meet new requirements. In theoretically, building project’s performance has a direct bearing on related to its potential for project success. However, in refurbishment building projects, the criteria for measure are become wider because the projects are a complex and multi-dimensional which encompassing many factors which reflect to the nature of works. Therefore, this impetus could be achieve by examine the direct empirical relationship between critical success factors (CSFs and complexity factors (CFs during managing the project in relation to delivering success on project performance. The research findings will be expected as the basis of future research in establish appropriate framework that provides information on managing refurbishment building projects and enhancing the project management competency for a better-built environment.

Analysis of Factors Influencing Building Refurbishment Project Performance

Science.gov (United States)

Ishak, Nurfadzillah; Aswad Ibrahim, Fazdliel; Azizi Azizan, Muhammad

2018-03-01

Presently, the refurbishment approach becomes favourable as it creates opportunities to incorporate sustainable value with other building improvement. In this regard, this approach needs to be implemented due to the issues on overwhelming ratio of existing building to new construction, which also can contribute to the environmental problem. Refurbishment principles imply to minimize the environmental impact and upgrading the performance of an existing building to meet new requirements. In theoretically, building project's performance has a direct bearing on related to its potential for project success. However, in refurbishment building projects, the criteria for measure are become wider because the projects are a complex and multi-dimensional which encompassing many factors which reflect to the nature of works. Therefore, this impetus could be achieve by examine the direct empirical relationship between critical success factors (CSFs) and complexity factors (CFs) during managing the project in relation to delivering success on project performance. The research findings will be expected as the basis of future research in establish appropriate framework that provides information on managing refurbishment building projects and enhancing the project management competency for a better-built environment.

Performance analyses of geothermal organic Rankine cycles with selected hydrocarbon working fluids

International Nuclear Information System (INIS)

Liu, Qiang; Duan, Yuanyuan; Yang, Zhen

2013-01-01

ORC (organic Rankine cycles) are promising systems for conversion of low temperature geothermal energy to electricity. The thermodynamic performance of the ORC with a wet cooling system is analyzed here using hydrocarbon working fluids driven by geothermal water from 100 °C to 150 °C and reinjection temperatures not less than 70 °C. The hydrocarbon working fluids are butane (R600), isobutane (R600a), pentane (R601), isopentane (R601a) and hexane. For each fluid, the ORC net power output first increases and then decreases with increasing turbine inlet temperature. The turbine inlet parameters are then optimized for the maximum power output. The ORC net power output increases as the condensation temperature decreases but the circulating pump power consumption increases especially for lower condensation temperatures at higher cooling water flow rates. The optimal condensation temperatures for the maximum plant power output are 29.45–29.75 °C for a cooling water inlet temperature of 20 °C and a pinch point temperature difference of 5 °C in the condenser. The maximum power is produced by an ORC using R600a at geothermal water inlet temperatures higher than 120 °C, followed by R245fa and R600 for reinjection temperatures not less than 70 °C. R600a also has the highest plant exergetic efficiency with the lowest turbine size factor. - Highlights: • ORC (organic Rankine cycles) using geothermal water from 100 to 150 °C and reinjection temperatures not less than 70 °C are analyzed. • Condensation temperatures optimized to maximize the plant power output. • An IHE (internal heat exchanger) gives higher plant power at low geothermal water temperatures and high reinjection temperatures. • ORC performance optimized considering the condensation and reinjection temperature. • R600a gives the best performance at the optimal turbine operating parameters

Facilitating wider application of progesterone RIA for improving livestock production in developing countries

International Nuclear Information System (INIS)

Oswin Perera, B.M.B.

2000-01-01

Full text: Research and development programmes supported by the Joint FAO/IAEA Division on improving livestock production in developing countries have identified three major biological constraints: feeding, breeding management and diseases. Proper breeding management is important in order to achieve optimum economic benefits (through products such as milk, meat and offspring) from an animal during its lifespan. This requires early attainment of puberty, short intervals from calving to conception, high conception rates and low number of matings or artificial inseminations (Als) per conception. The use of radioimmunoassay (RIA) for measuring progesterone in milk of dairy animals or in blood of meat animals, together with recording of data on reproductive events and production parameters, is an indispensable tool that provides information both on problems in breeding management by farmers as well as deficiencies in the Al services provided to them by government, co-operative or private organizations. This allows appropriate strategies and interventions to be adopted to overcome these limitations. Progesterone RIA can also detect animals that have not conceived by Al within 21 days after mating (early non-pregnancy diagnosis or N-PD), and alert farmers to the need to have these animals closely observed for oestrus and re-inseminated at the appropriate time. In order to ensure the sustained use of RIA technology for progesterone measurement in developing Member States, the IAEA has been engaged in the development and transfer of simple, robust and cheap methods of RIA. The system currently being used is based on a direct (non-extraction) method, using a 125 I-progesterone tracer and a solid-phase separation method (antibody coated tubes). In order to ensure wider availability (and lower cost) of the two key reagents required for the assay, the IAEA has initiated a programme to assist Member States to develop the capability to produce these in selected regional or

Development of ITER 3D neutronics model and nuclear analyses

International Nuclear Information System (INIS)

Zeng, Q.; Zheng, S.; Lu, L.; Li, Y.; Ding, A.; Hu, H.; Wu, Y.

2007-01-01

ITER nuclear analyses rely on the calculations with the three-dimensional (3D) Monte Carlo code e.g. the widely-used MCNP. However, continuous changes in the design of the components require the 3D neutronics model for nuclear analyses should be updated. Nevertheless, the modeling of a complex geometry with MCNP by hand is a very time-consuming task. It is an efficient way to develop CAD-based interface code for automatic conversion from CAD models to MCNP input files. Based on the latest CAD model and the available interface codes, the two approaches of updating 3D nuetronics model have been discussed by ITER IT (International Team): The first is to start with the existing MCNP model 'Brand' and update it through a combination of direct modification of the MCNP input file and generation of models for some components directly from the CAD data; The second is to start from the full CAD model, make the necessary simplifications, and generate the MCNP model by one of the interface codes. MCAM as an advanced CAD-based MCNP interface code developed by FDS Team in China has been successfully applied to update the ITER 3D neutronics model by adopting the above two approaches. The Brand model has been updated to generate portions of the geometry based on the newest CAD model by MCAM. MCAM has also successfully performed conversion to MCNP neutronics model from a full ITER CAD model which is simplified and issued by ITER IT to benchmark the above interface codes. Based on the two updated 3D neutronics models, the related nuclear analyses are performed. This paper presents the status of ITER 3D modeling by using MCAM and its nuclear analyses, as well as a brief introduction of advanced version of MCAM. (authors)

Development of the computer code system for the analyses of PWR core

International Nuclear Information System (INIS)

Tsujimoto, Iwao; Naito, Yoshitaka.

1992-11-01

This report is one of the materials for the work titled 'Development of the computer code system for the analyses of PWR core phenomena', which is performed under contracts between Shikoku Electric Power Company and JAERI. In this report, the numerical method adopted in our computer code system are described, that is, 'The basic course and the summary of the analysing method', 'Numerical method for solving the Boltzmann equation', 'Numerical method for solving the thermo-hydraulic equations' and 'Description on the computer code system'. (author)

Optical region elemental abundance analyses of B and A stars

International Nuclear Information System (INIS)

Adelman, S.J.; Young, J.M.; Baldwin, H.E.

1984-01-01

Abundance analyses using optical region data and fully line blanketed model atmospheres have been performed for two sharp-lined hot Am stars o Pegasi and σ Aquarii and for the sharp-lined marginally peculiar A star v Cancri. The derived abundances exhibit definite anomalies compared with those of normal B-type stars and the Sun. (author)

Numerical analyses for efficient photoionization by nonmonochromatic fields

International Nuclear Information System (INIS)

Hasegawa, Shuichi; Suzuki, Atsuyuki

2000-01-01

Numerical analyses on excitation and ionization probabilities of atoms with hyperfine structures were performed in order to compare two different excitation methods, adiabatic excitation and broadband excitation. The lifetime of the intermediate states was considered in order to investigate the effect of the absorption line broadening. The dependences of the two excitation methods on the lifetime were found to be quite different. The ionization probability by the adiabatic excitation is higher than that by the broadband excitation for identical excitation laser intensity. (author)

Evaluation of Earning Performance of Female Owned Leather ...

African Journals Online (AJOL)

The tools for data analyses were descriptive statistics, income statement and an econometric model involving Ordinary Least Square regression analyses. The earning performance evaluation indicated that the enterprises have performed creditably considering the value of the gross margin analysis which is high and gross ...

Does Worker Wellbeing Affect Workplace Performance?

OpenAIRE

Bryson, Alex; Forth, John; Stokes, Lucy

2015-01-01

This paper uses linked employer-employee data to investigate the relationship between employees' subjective well-being and workplace performance in Britain. The analyses show a clear, positive and statistically-significant relationship between the average level of job satisfaction at the workplace and workplace performance. This finding is present in both cross-sectional and panel analyses and is robust to various estimation methods and model specifications. In contrast, we find no associatio...

Integrated Waste Treatment Unit (IWTU) Input Coal Analyses and Off-Gass Filter (OGF) Content Analyses

Energy Technology Data Exchange (ETDEWEB)

Jantzen, Carol M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Missimer, David M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Guenther, Chris P. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Shekhawat, Dushyant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); VanEssendelft, Dirk T. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Means, Nicholas C. [AECOM Technology Corp., Oak Ridge, TN (United States)

2015-04-23

in process piping and materials, in excessive off-gas absorbent loading, and in undesired process emissions. The ash content of the coal is important as the ash adds to the DMR and other vessel products which affect the final waste product mass and composition. The amount and composition of the ash also affects the reaction kinetics. Thus ash content and composition contributes to the mass balance. In addition, sodium, potassium, calcium, sulfur, and maybe silica and alumina in the ash may contribute to wall-scale formation. Sodium, potassium, and alumina in the ash will be overwhelmed by the sodium, potassium, and alumina from the feed but the impact from the other ash components needs to be quantified. A maximum coal particle size is specified so the feed system does not plug and a minimum particle size is specified to prevent excess elutriation from the DMR to the Process Gas Filter (PGF). A vendor specification was used to procure the calcined coal for IWTU processing. While the vendor supplied a composite analysis for the 22 tons of coal (Appendix A), this study compares independent analyses of the coal performed at the Savannah River National Laboratory (SRNL) and at the National Energy Technology Laboratory (NETL). Three supersacks a were sampled at three different heights within the sack in order to determine within bag variability and between bag variability of the coal. These analyses were also compared to the vendor’s composite analyses and to the coal specification. These analyses were also compared to historic data on Bestac coal analyses that had been performed at Hazen Research Inc. (HRI) between 2004-2011.

An Innovative Approach to Functionality Testing of Analysers in the Clinical Laboratory

OpenAIRE

Stockmann, Wolfgang; Engeldinger, Werner; Kunst, Albert; McGovern, Margaret

2008-01-01

The established protocols for evaluating new analytical systems produce indispensable information with regard to quality characteristics, but in general they fail to analyse the system performance under routine-like conditions. We describe a model which allows the testing of a new analytical system under conditions close to the routine in a controlled and systematic manner by using an appropriate software tool. Performing routine simulation experiments, either reflecting imprecision or method...

LINEAR AND NON-LINEAR ANALYSES OF CABLE-STAYED STEEL FRAME SUBJECTED TO SEISMIC ACTIONS

Directory of Open Access Journals (Sweden)

Marko Đuran

2017-01-01

Full Text Available In this study, linear and non-linear dynamic analyses of a cable-stayed steel frame subjected to seismic actions are performed. The analyzed cable-stayed frame is the main supporting structure of a wide-span sports hall. Since the complex dynamic behavior of cable-stayed structures results in significant geometric nonlinearity, a nonlinear time history analysis is conducted. As a reference, an analysis using the European standard approach, the so-called linear modal response spectrum method, is also performed. The analyses are conducted for different seismic actions considering dependence on the response spectrums for various ground types and the corresponding artificially generated accelerograms. Despite fundamental differences between the two analyses, results indicate that the modal response spectrum analysis is surprisingly consistent with the internal forces and bending moment distributions of the nonlinear time history analysis. However, significantly smaller values of bending moments, internal forces, and displacements are obtained with the response spectrum analysis.

Energy and exergy analyses of electrolytic hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Rosen, M A [Ryerson Polytechnic Univ., Toronto, ON (Canada). Dept. of Mechanical Engineering

1995-07-01

The thermodynamic performance is investigated of a water-electrolysis process for producing hydrogen, based on current-technology equipment. Both energy and exergy analyses are used. Three cases are considered in which the principal driving energy inputs are (i) electricity, (ii) the high-temperature heat used to generate the electricity, and (iii) the heat source used to produce the high-temperature heat. The nature of the heat source (e.g.) fossil fuel, nuclear fuel, solar energy, (etc.) is left as general as possible. The analyses indicate that, when the main driving input is the hypothetical heat source, the principal thermodynamic losses are associated with water splitting, electricity generation and heat production; the losses are mainly due to the irreversibilities associated with converting a heat source to heat, and heat transfer across large temperature differences. The losses associated with the waste heat in used cooling water, because of its low quality, are not as significant as energy analysis indicates. (Author)

ATWS analyses for Krsko Full Scope Simulator verification

Energy Technology Data Exchange (ETDEWEB)

Cerne, G; Tiselj, I; Parzer, I [Reactor Engineering Div., Inst. Jozef Stefan, Ljubljana (Slovenia)

2000-07-01

The purpose of this analysis was to simulate Anticipated Transient without Scram transient for Krsko NPP. The results of these calculations were used for verification of reactor coolant system thermal-hydraulic response predicted by Krsko Full Scope Simulator. For the thermal-hydraulic analyses the RELAP5/MOD2 code and the input card deck for NPP Krsko was used. The analyses for ATWS were performed to assess the influence and benefit of ATWS Mitigation System Actuation Circuitry (AMSAC). In the presented paper the most severe ATWS scenarios have been analyzed, starting with the loss of Main Feedwater at both steam generators. Thus, gradual loss of secondary heat sink occurred. On top of that, control rods were not supposed to scram, leaving the chain reaction to be controlled only by inherent physical properties of the fuel and moderator and eventual actions of the BOP system. The primary system response has been studied regarding the AMSAC availability. (author)

Performance optimization for a variable throat ejector in a solar refrigeration system

KAUST Repository

Yen, R.H.; Huang, B.J.; Chen, C.Y.; Shiu, T.Y.; Cheng, C.W.; Chen, S.S.; Shestopalov, K.

2013-01-01

In a solar vapor ejector refrigeration system, the solar heat supply may vary because of variations in solar irradiation intensity, making it difficult to maintain a steady generator temperature. To improve ejector performance, this study proposes a variable throat ejector (VTEJ) and analyzes its performance using CFD simulations. The following conclusions can be drawn. An ejector with a greater throat area and larger solar collector allows a wider operating range of generator temperatures, but may be overdesigned and expensive. Conversely, decreasing the throat area limits the operating range of generator temperatures. Thus the ejector with a fixed throat area may be unsuitable to use solar energy as a heat source. For a VTEJ, this study derives a curve-fitting relationship between the optimum throat area ratio and the operating temperatures. Using this relationship to adjust the throat area ratio, the ejector can consistently achieve optimal and stable performances under a varying solar heat supply. © 2013 Elsevier Ltd and IIR. All rights reserved.

Performance optimization for a variable throat ejector in a solar refrigeration system

KAUST Repository

Yen, R.H.

2013-08-01

In a solar vapor ejector refrigeration system, the solar heat supply may vary because of variations in solar irradiation intensity, making it difficult to maintain a steady generator temperature. To improve ejector performance, this study proposes a variable throat ejector (VTEJ) and analyzes its performance using CFD simulations. The following conclusions can be drawn. An ejector with a greater throat area and larger solar collector allows a wider operating range of generator temperatures, but may be overdesigned and expensive. Conversely, decreasing the throat area limits the operating range of generator temperatures. Thus the ejector with a fixed throat area may be unsuitable to use solar energy as a heat source. For a VTEJ, this study derives a curve-fitting relationship between the optimum throat area ratio and the operating temperatures. Using this relationship to adjust the throat area ratio, the ejector can consistently achieve optimal and stable performances under a varying solar heat supply. © 2013 Elsevier Ltd and IIR. All rights reserved.

Cogema looks to wider markets

International Nuclear Information System (INIS)

Cruikshank, A.

1984-01-01

As the pace of the French nuclear programme slackens off, Cogema is planning to compete even more vigorously in world fuel cycle markets. The company believes the foundations for success lie in its comprehensive range of fuel cycle activities, its status as a wholly-owned subsidiary of the Commissariat a l'Energie Atomique, and its experience in fulfilling the bulk of French fuel cycle needs. To build on these foundations, Cogema is exploring for uranium, investing heavily in new plant, and strengthening its commercial management. (author)

A Wider Vision of Learning

Science.gov (United States)

Washor, Elliot

2018-01-01

The Harbor Freight Fellows Initiative gives students who have demonstrated outsized competence in a trade--but who may be struggling in a traditional high school or career and technical education (CTE) program--opportunities to learn a trade with a mentor in a workplace. The author describes how this program requires educators to deepen their…

Wider benefits of adult education

DEFF Research Database (Denmark)

Schuller, Tom; Desjardins, Richard

2010-01-01

This article discusses the measurement of the social outcomes of learning. It extends the discussion beyond employment and labor market outcomes to consider the impact of adult learning on social domains, with particular focus on health and civic engagement. It emphasizes the distinction between ...... public and private, and monetary and nonmonetary benefits. It reviews methodological issues on measuring outcomes, and identifies a number of channels through which adult learning has its effects....

Hydrogen Analyses in the EPR

International Nuclear Information System (INIS)

Worapittayaporn, S.; Eyink, J.; Movahed, M.

2008-01-01

In severe accidents with core melting large amounts of hydrogen may be released into the containment. The EPR provides a combustible gas control system to prevent hydrogen combustion modes with the potential to challenge the containment integrity due to excessive pressure and temperature loads. This paper outlines the approach for the verification of the effectiveness and efficiency of this system. Specifically, the justification is a multi-step approach. It involves the deployment of integral codes, lumped parameter containment codes and CFD codes and the use of the sigma criterion, which provides the link to the broad experimental data base for flame acceleration (FA) and deflagration to detonation transition (DDT). The procedure is illustrated with an example. The performed analyses show that hydrogen combustion at any time does not lead to pressure or temperature loads that threaten the containment integrity of the EPR. (authors)

Towards an assistive peripheral visual prosthesis for long-term treatment of retinitis pigmentosa: evaluating mobility performance in immersive simulations

Science.gov (United States)

Zapf, Marc Patrick H.; Boon, Mei-Ying; Matteucci, Paul B.; Lovell, Nigel H.; Suaning, Gregg J.

2015-06-01

Objective. The prospective efficacy of a future peripheral retinal prosthesis complementing residual vision to raise mobility performance in non-end stage retinitis pigmentosa (RP) was evaluated using simulated prosthetic vision (SPV). Approach. Normally sighted volunteers were fitted with a wide-angle head-mounted display and carried out mobility tasks in photorealistic virtual pedestrian scenarios. Circumvention of low-lying obstacles, path following, and navigating around static and moving pedestrians were performed either with central simulated residual vision of 10° alone or enhanced by assistive SPV in the lower and lateral peripheral visual field (VF). Three layouts of assistive vision corresponding to hypothetical electrode array layouts were compared, emphasizing higher visual acuity, a wider visual angle, or eccentricity-dependent acuity across an intermediate angle. Movement speed, task time, distance walked and collisions with the environment were analysed as performance measures. Main results. Circumvention of low-lying obstacles was improved with all tested configurations of assistive SPV. Higher-acuity assistive vision allowed for greatest improvement in walking speeds—14% above that of plain residual vision, while only wide-angle and eccentricity-dependent vision significantly reduced the number of collisions—both by 21%. Navigating around pedestrians, there were significant reductions in collisions with static pedestrians by 33% and task time by 7.7% with the higher-acuity layout. Following a path, higher-acuity assistive vision increased walking speed by 9%, and decreased collisions with stationary cars by 18%. Significance. The ability of assistive peripheral prosthetic vision to improve mobility performance in persons with constricted VFs has been demonstrated. In a prospective peripheral visual prosthesis, electrode array designs need to be carefully tailored to the scope of tasks in which a device aims to assist. We posit that maximum

High perfomance liquid chromatography in pharmaceutical analyses.

Science.gov (United States)

Nikolin, Branko; Imamović, Belma; Medanhodzić-Vuk, Saira; Sober, Miroslav

2004-05-01

In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatography replaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography (HPLC) analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1) Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or serum contains numerous endogenous

Application of insights from the IREP analyses to the IREP procedures guide

International Nuclear Information System (INIS)

Carlson, D.D.; Murphy, J.A.; Young, J.

1982-01-01

One of the objectives of the Interim Reliability Evaluation Program (IREP) was to prepare a set of procedures based on experience gained in the study for use in future IREP-type analyses. The current analyses used a set of procedures and, over the course of the program, a concerted effort was made to develop insights which could improve these procedures. Insights have been gained into the organization and content of th procedures guide, into the performance and management of an IREP analysis, and into the methods to be used in the analysis

Advanced handbook for accident analyses of German nuclear power plants; Weiterentwicklung eines Handbuches fuer Stoerfallanalysen deutscher Kernkraftwerke

Energy Technology Data Exchange (ETDEWEB)

Kerner, Alexander; Broecker, Annette; Hartung, Juergen; Mayer, Gerhard; Pallas Moner, Guim

2014-09-15

The advanced handbook of safety analyses (HSA) comprises a comprehensive electronic collection of knowledge for the compilation and conduction of safety analyses in the area of reactor, plant and containment behaviour as well as results of existing safety analyses (performed by GRS in the past) with characteristic specifications and further background information. In addition, know-how from the analysis software development and validation process is presented and relevant rules and regulations with regard to safety demonstration are provided. The HSA comprehensively covers the topic thermo-hydraulic safety analyses (except natural hazards, man-made hazards and malicious acts) for German pressurized and boiling water reactors for power and non-power operational states. In principle, the structure of the HSA-content represents the analytical approach utilized by safety analyses and applying the knowledge from safety analyses to technical support services. On the basis of a multilevel preparation of information to the topics ''compilation of safety analyses'', ''compilation of data bases'', ''assessment of safety analyses'', ''performed safety analyses'', ''rules and regulation'' and ''ATHLET-validation'' the HSA addresses users with different background, allowing them to enter the HSA at different levels. Moreover, the HSA serves as a reference book, which is designed future-oriented, freely configurable related to the content, completely integrated into the GRS internal portal and prepared to be used by a growing user group.

The mzTab Data Exchange Format: Communicating Mass-spectrometry-based Proteomics and Metabolomics Experimental Results to a Wider Audience*

Science.gov (United States)

Griss, Johannes; Jones, Andrew R.; Sachsenberg, Timo; Walzer, Mathias; Gatto, Laurent; Hartler, Jürgen; Thallinger, Gerhard G.; Salek, Reza M.; Steinbeck, Christoph; Neuhauser, Nadin; Cox, Jürgen; Neumann, Steffen; Fan, Jun; Reisinger, Florian; Xu, Qing-Wei; del Toro, Noemi; Pérez-Riverol, Yasset; Ghali, Fawaz; Bandeira, Nuno; Xenarios, Ioannis; Kohlbacher, Oliver; Vizcaíno, Juan Antonio; Hermjakob, Henning

2014-01-01

The HUPO Proteomics Standards Initiative has developed several standardized data formats to facilitate data sharing in mass spectrometry (MS)-based proteomics. These allow researchers to report their complete results in a unified way. However, at present, there is no format to describe the final qualitative and quantitative results for proteomics and metabolomics experiments in a simple tabular format. Many downstream analysis use cases are only concerned with the final results of an experiment and require an easily accessible format, compatible with tools such as Microsoft Excel or R. We developed the mzTab file format for MS-based proteomics and metabolomics results to meet this need. mzTab is intended as a lightweight supplement to the existing standard XML-based file formats (mzML, mzIdentML, mzQuantML), providing a comprehensive summary, similar in concept to the supplemental material of a scientific publication. mzTab files can contain protein, peptide, and small molecule identifications together with experimental metadata and basic quantitative information. The format is not intended to store the complete experimental evidence but provides mechanisms to report results at different levels of detail. These range from a simple summary of the final results to a representation of the results including the experimental design. This format is ideally suited to make MS-based proteomics and metabolomics results available to a wider biological community outside the field of MS. Several software tools for proteomics and metabolomics have already adapted the format as an output format. The comprehensive mzTab specification document and extensive additional documentation can be found online. PMID:24980485

Managing workplace stress in community pharmacy organisations: lessons from a review of the wider stress management and prevention literature.

Science.gov (United States)

Jacobs, Sally; Johnson, Sheena; Hassell, Karen

2018-02-01

Workplace stress in community pharmacy is increasing internationally due, in part, to pharmacists' expanding roles and escalating workloads. Whilst the business case for preventing and managing workplace stress by employers is strong, there is little evidence for the effectiveness of organisational stress management interventions in community pharmacy settings. To identify and synthesise existing evidence for the effectiveness of organisational solutions to workplace stress from the wider organisational literature which may be adaptable to community pharmacies. A secondary synthesis of existing reviews. Publications were identified through keyword searches of electronic databases and the internet; inclusion and exclusion criteria were applied; data about setting, intervention, method of evaluation, effectiveness and conclusions (including factors for success) were extracted and synthesised. Eighteen reviews of the stress management and prevention literature were identified. A comprehensive list of organisational interventions to prevent or manage workplace stress, ordered by prevalence of evidence of effectiveness, was produced, together with an ordered list of the benefits both to the individual and employing organisation. An evidence-based model of best practice was derived specifying eight factors for success: top management support, context-specific interventions, combined organisational and individual interventions, a participative approach, clearly delineated tasks and responsibilities, buy-in from middle management, change agents as facilitators and change in organisational culture. This literature review provides community pharmacy organisations with evidence from which to develop effective and successful stress management strategies to support pharmacists and pharmacy staff. Well-designed trials of stress management interventions in community pharmacy organisations are still required. © 2017 Royal Pharmaceutical Society.

Post test analyses of Revisa benchmark based on a creep test at 1100 Celsius degrees performed on a notched tube

International Nuclear Information System (INIS)

Fischer, M.; Bernard, A.; Bhandari, S.

2001-01-01

In the Euratom 4. Framework Program of the European Commission, REVISA Project deals with the Reactor Vessel Integrity under Severe Accidents. One of the tasks consists in the experimental validation of the models developed in the project. To do this, a benchmark was designed where the participants use their models to test the results against an experiment. The experiment called RUPTHER 15 was conducted by the coordinating organisation, CEA (Commissariat a l'Energie Atomique) in France. It is a 'delayed fracture' test on a notched tube. Thermal loading is an axial gradient with a temperature of about 1130 C in the mid-part. Internal pressure is maintained at 0.8 MPa. This paper presents the results of Finite Element calculations performed by Framatome-ANP using the SYSTUS code. Two types of analyses were made: -) one based on the 'time hardening' Norton-Bailey creep law, -) the other based on the coupled creep/damage Lemaitre-Chaboche model. The purpose of this paper is in particular to show the influence of temperature on the simulation results. At high temperatures of the kind dealt with here, slight errors in the temperature measurements can lead to very large differences in the deformation behaviour. (authors)

The Minimum reporting package – Using standardised indicators to analyse the performance of Supplementary Feeding Programmes in 7 countries

International Nuclear Information System (INIS)

Fuller, Susan; Andert, Christoph; Keane, Emily; Navarro-Colorado, Carlos

2014-01-01

Full text: Background: The 2008 HPN Network Paper ‘Measuring the effectiveness of Supplementary Feeding Programmes in emergencies’ highlighted the inconsistencies, inadequacies and bias associated with reporting of Supplementary Feeding Programmes (SFP) and outlined the lack of existing tools to support all reporting needs for Community Management of Acute Malnutrition (CMAM) programmes. The ‘Minimum Reporting Package’ (MRP) was developed in response to this paper, and has evolved to a concise and comprehensive management tool which uses standardised indicators to improve the reporting and monitoring of the treatment components of community based management of acute malnutrition (CMAM). The aim of the tool is to provide a contextualised overview of the CMAM programmes to improve programme management decisions, improve accountability and assist urgently needed learning in the effectiveness of this programme approach. Methods: Data is collected regularly by a group of MRP partners and feeds into a central database. Analysis is on-going and leading to a larger analysis planned for the end of 2013/early 2014. The aims of these analyses are: • To describe the characteristics of CMAM programmes • To describe and assess the effect of CMAM programmes on rehabilitating malnourished individuals • To compare programme performance and outcomes according to contextual factors, differences in protocols or approaches. A preliminary analysis was run on Supplementary Feeding Programme (SFP) data collected between January 2012 and July 2013. The length of programme data differs but is generally above 3 months in order to be able to analyse programme results (a full contextual analysis will be conducted in early 2014 to be presented). Results: SFP data was available from 4 NGOs, supporting 10 programmes in 7 countries (Burkina Faso, Chad, Ethiopia, Ivory Coast, India, Kenya, Somalia). After data cleaning, a total of 23,584 admissions and 15,496 were included. The

Analyses of SRS waste glass buried in granite in Sweden and salt in the United States

International Nuclear Information System (INIS)

Williams, J.P.; Wicks, G.G.; Clark, D.E.; Lodding, A.R.

1991-01-01

Simulated Savannah River Site (SRS) waste glass forms have been buried in the granite geology of the Stirpa mine in Sweden for two years. Analyses of glass surfaces provided a measure of the performance of the waste glasses as a function of time. Similar SRS waste glass compositions have also been buried in salt at the WIPP facility in Carlsbad, New Mexico for a similar time period. Analyses of the SRS waste glasses buried in-situ in granite will be presented and compared to the performance of these same compositions buried in salt at WIPP

Comparative multivariate analyses of transient otoacoustic emissions and distorsion products in normal and impaired hearing.

Science.gov (United States)

Stamate, Mirela Cristina; Todor, Nicolae; Cosgarea, Marcel

2015-01-01

The clinical utility of otoacoustic emissions as a noninvasive objective test of cochlear function has been long studied. Both transient otoacoustic emissions and distorsion products can be used to identify hearing loss, but to what extent they can be used as predictors for hearing loss is still debated. Most studies agree that multivariate analyses have better test performances than univariate analyses. The aim of the study was to determine transient otoacoustic emissions and distorsion products performance in identifying normal and impaired hearing loss, using the pure tone audiogram as a gold standard procedure and different multivariate statistical approaches. The study included 105 adult subjects with normal hearing and hearing loss who underwent the same test battery: pure-tone audiometry, tympanometry, otoacoustic emission tests. We chose to use the logistic regression as a multivariate statistical technique. Three logistic regression models were developed to characterize the relations between different risk factors (age, sex, tinnitus, demographic features, cochlear status defined by otoacoustic emissions) and hearing status defined by pure-tone audiometry. The multivariate analyses allow the calculation of the logistic score, which is a combination of the inputs, weighted by coefficients, calculated within the analyses. The accuracy of each model was assessed using receiver operating characteristics curve analysis. We used the logistic score to generate receivers operating curves and to estimate the areas under the curves in order to compare different multivariate analyses. We compared the performance of each otoacoustic emission (transient, distorsion product) using three different multivariate analyses for each ear, when multi-frequency gold standards were used. We demonstrated that all multivariate analyses provided high values of the area under the curve proving the performance of the otoacoustic emissions. Each otoacoustic emission test presented high

POWER CYCLE AND STRESS ANALYSES FOR HIGH TEMPERATURE GAS-COOLED REACTOR

International Nuclear Information System (INIS)

Oh, Chang H; Davis, Cliff; Hawkes, Brian D; Sherman, Steven R

2007-01-01

various operating conditions as well as trade offs between efficiency and capital cost. Parametric studies were carried out on reactor outlet temperature, mass flow, pressure, and turbine cooling. Recommendations on the optimal working fluid for each configuration were made. Engineering analyses were performed for several configurations of the intermediate heat transport loop that transfers heat from the nuclear reactor to the hydrogen production plant. The analyses evaluated parallel and concentric piping arrangements and two different working fluids, including helium and a liquid salt. The thermal-hydraulic analyses determined the size and insulation requirements for the hot and cold leg pipes in the different configurations. Mechanical analyses were performed to determine hoop stresses and thermal expansion characteristics for the different configurations. Economic analyses were performed to estimate the cost of the various configurations

Post-Irradiation Non-Destructive Analyses of the AFIP-7 Experiment

Science.gov (United States)

Williams, W. J.; Robinson, A. B.; Rabin, B. H.

2017-12-01

This article reports the results and interpretation of post-irradiation non-destructive examinations performed on four curved full-size fuel plates that comprise the AFIP-7 experiment. These fuel plates, having a U-10 wt.%Mo monolithic design, were irradiated under moderate operating conditions in the Advanced Test Reactor to assess fuel performance for geometries that are prototypic of research reactor fuel assemblies. Non-destructive examinations include visual examination, neutron radiography, profilometry, and precision gamma scanning. This article evaluates the qualitative and quantitative data taken for each plate, compares corresponding data sets, and presents the results of swelling analyses. These characterization results demonstrate that the fuel meets established irradiation performance requirements for mechanical integrity, geometric stability, and stable and predictable behavior.

Meta-analyses of the 5-HTTLPR polymorphisms and post-traumatic stress disorder.

Directory of Open Access Journals (Sweden)

Fernando Navarro-Mateu

Full Text Available OBJECTIVE: To conduct a meta-analysis of all published genetic association studies of 5-HTTLPR polymorphisms performed in PTSD cases. METHODS DATA SOURCES: Potential studies were identified through PubMed/MEDLINE, EMBASE, Web of Science databases (Web of Knowledge, WoK, PsychINFO, PsychArticles and HuGeNet (Human Genome Epidemiology Network up until December 2011. STUDY SELECTION: Published observational studies reporting genotype or allele frequencies of this genetic factor in PTSD cases and in non-PTSD controls were all considered eligible for inclusion in this systematic review. DATA EXTRACTION: Two reviewers selected studies for possible inclusion and extracted data independently following a standardized protocol. STATISTICAL ANALYSIS: A biallelic and a triallelic meta-analysis, including the total S and S' frequencies, the dominant (S+/LL and S'+/L'L' and the recessive model (SS/L+ and S'S'/L'+, was performed with a random-effect model to calculate the pooled OR and its corresponding 95% CI. Forest plots and Cochran's Q-Statistic and I(2 index were calculated to check for heterogeneity. Subgroup analyses and meta-regression were carried out to analyze potential moderators. Publication bias and quality of reporting were also analyzed. RESULTS: 13 studies met our inclusion criteria, providing a total sample of 1874 patients with PTSD and 7785 controls in the biallelic meta-analyses and 627 and 3524, respectively, in the triallelic. None of the meta-analyses showed evidence of an association between 5-HTTLPR and PTSD but several characteristics (exposure to the same principal stressor for PTSD cases and controls, adjustment for potential confounding variables, blind assessment, study design, type of PTSD, ethnic distribution and Total Quality Score influenced the results in subgroup analyses and meta-regression. There was no evidence of potential publication bias. CONCLUSIONS: Current evidence does not support a direct effect of 5-HTTLPR

Meta-analyses of the 5-HTTLPR polymorphisms and post-traumatic stress disorder.

Science.gov (United States)

Navarro-Mateu, Fernando; Escámez, Teresa; Koenen, Karestan C; Alonso, Jordi; Sánchez-Meca, Julio

2013-01-01

To conduct a meta-analysis of all published genetic association studies of 5-HTTLPR polymorphisms performed in PTSD cases. Potential studies were identified through PubMed/MEDLINE, EMBASE, Web of Science databases (Web of Knowledge, WoK), PsychINFO, PsychArticles and HuGeNet (Human Genome Epidemiology Network) up until December 2011. Published observational studies reporting genotype or allele frequencies of this genetic factor in PTSD cases and in non-PTSD controls were all considered eligible for inclusion in this systematic review. Two reviewers selected studies for possible inclusion and extracted data independently following a standardized protocol. A biallelic and a triallelic meta-analysis, including the total S and S' frequencies, the dominant (S+/LL and S'+/L'L') and the recessive model (SS/L+ and S'S'/L'+), was performed with a random-effect model to calculate the pooled OR and its corresponding 95% CI. Forest plots and Cochran's Q-Statistic and I(2) index were calculated to check for heterogeneity. Subgroup analyses and meta-regression were carried out to analyze potential moderators. Publication bias and quality of reporting were also analyzed. 13 studies met our inclusion criteria, providing a total sample of 1874 patients with PTSD and 7785 controls in the biallelic meta-analyses and 627 and 3524, respectively, in the triallelic. None of the meta-analyses showed evidence of an association between 5-HTTLPR and PTSD but several characteristics (exposure to the same principal stressor for PTSD cases and controls, adjustment for potential confounding variables, blind assessment, study design, type of PTSD, ethnic distribution and Total Quality Score) influenced the results in subgroup analyses and meta-regression. There was no evidence of potential publication bias. Current evidence does not support a direct effect of 5-HTTLPR polymorphisms on PTSD. Further analyses of gene-environment interactions, epigenetic modulation and new studies with large samples

Opto-mechanical Analyses for Performance Optimization of Lightweight Grazing-incidence Mirrors

Science.gov (United States)

Roche, Jacqueline M.; Kolodziejczak, Jeffery J.; Odell, Stephen L.; Elsner, Ronald F.; Weisskopf, Martin C.; Ramsey, Brian; Gubarev, Mikhail V.

2013-01-01

New technology in grazing-incidence mirror fabrication and assembly is necessary to achieve subarcsecond optics for large-area x-ray telescopes. In order to define specifications, an understanding of performance sensitivity to design parameters is crucial. MSFC is undertaking a systematic study to specify a mounting approach, mirror substrate, and testing method. Lightweight mirrors are typically flimsy and are, therefore, susceptible to significant distortion due to mounting and gravitational forces. Material properties of the mirror substrate along with its dimensions significantly affect the distortions caused by mounting and gravity. A parametric study of these properties and their relationship to mounting and testing schemes will indicate specifications for the design of the next generation of lightweight grazing-incidence mirrors. Here we report initial results of this study.

Paradigms of Communication in Performance and Dance Studies

OpenAIRE

Popa Blanariu, Nicoleta

2015-01-01

In her article "Paradigms of Communication in Performance and Dance Studies" Nicoleta Popa Blanariu approaches from an interdisciplinary perspective the measure in which performing arts (theater, music, ballet, Indian classical dance, folk dance, etc.), as well as ritual performance constitute a corpus that may be analysed by means of theoretical and conceptual tools in communication studies and semiotics. Popa Blanariu analyses the relation between signification and communication in performi...

Parametric analyses of single-zone thorium-fueled molten salt reactor fuel cycle options

International Nuclear Information System (INIS)

Powers, J.J.; Worrall, A.; Gehin, J.C.; Harrison, T.J.; Sunny, E.E.

2013-01-01

Analyses of fuel cycle options based on thorium-fueled Molten Salt Reactors (MSRs) have been performed in support of fuel cycle screening and evaluation activities for the United States Department of Energy. The MSR options considered are based on thermal spectrum MSRs with 3 different separations levels: full recycling, limited recycling, and 'once-through' operation without active separations. A single-fluid, single-zone 2250 MWth (1000 MWe) MSR concept consisting of a fuel-bearing molten salt with graphite moderator and reflectors was used as the basis for this study. Radiation transport and isotopic depletion calculations were performed using SCALE 6.1 with ENDF/B-VII nuclear data. New methodology developed at Oak Ridge National Laboratory (ORNL) enables MSR analysis using SCALE, modeling material feed and removal by taking user-specified parameters and performing multiple SCALE/TRITON simulations to determine the resulting equilibrium operating conditions. Parametric analyses examined the sensitivity of the performance of a thorium MSR to variations in the separations efficiency for protactinium and fission products. Results indicate that self-sustained operation is possible with full or limited recycling but once-through operation would require an external neutron source. (authors)

The MARS for squat, countermovement, and standing long jump performance analyses: are measures reproducible?

Science.gov (United States)

Hébert-Losier, Kim; Beaven, C Martyn

2014-07-01

Jump tests are often used to assess the effect of interventions because their outcomes are reported valid indicators of functional performance. In this study, we examined the reproducibility of performance parameters from 3 common jump tests obtained using the commercially available Kistler Measurement, Analysis and Reporting Software (MARS). On 2 separate days, 32 men performed 3 squat jumps (SJs), 3 countermovement jumps (CMJs), and 3 standing long jumps (LJs) on a Kistler force-plate. On both days, the performance measures from the best jump of each series were extracted using the MARS. Changes in the mean scores, intraclass correlation coefficients (ICCs), and coefficients of variations (CVs) were computed to quantify the between-day reproducibility of each parameter. Moreover, the reproducibility quantifiers specific to the 3 separate jumps were compared using nonparametric tests. Overall, an acceptable between-day reproducibility (mean ± SD, ICC, and CV) of SJ (0.88 ± 0.06 and 7.1 ± 3.8%), CMJ (0.84 ± 0.17 and 5.9 ± 4.1%), and LJ (0.80 ± 0.13 and 8.1 ± 4.1%) measures was found using the MARS, except for parameters directly relating to the rate of force development (i.e., time to maximal force) and change in momentum during countermovement (i.e., negative force impulse) where reproducibility was lower. A greater proportion of the performance measures from the standing LJs had low ICCs and/or high CVs values most likely owing to the complex nature of the LJ test. Practitioners and researchers can use most of the jump test parameters from the MARS with confidence to quantify changes in the functional ability of individuals over time, except for those relating to the rate of force development or change in momentum during countermovement phases of jumps.

Analyses of thermodynamic performance for the endoreversible Otto cycle with the concepts of entropy generation and entransy

Institute of Scientific and Technical Information of China (English)

WU; YanQiu

2017-01-01

In this paper,power the the and endoreversible the Otto cycle is analyzed with the entropy generation minimization objectives,and the the entransy theory.of The output power,the heat-work conversion efficiency are taken as the optimization rate,and relationships the output heat-work conversion efficiency,entransy the entropy generation and the entropy generation rate numbers,the work entransy are loss rate,The entransy loss of coefficient,the dissipation rate the entransy variation associated with discussed.applicability entropy the entropy generation minimization and the entransy theory while to the analyses is also analyzed.It is found do that smaller generation rate does not always lead to larger output our power,smaller entropy entransy generation loss numbers and not always lead to larger heat-work conversion efficiency,either.larger the In calculations,power,both larger larger rate larger entransy variation heat-work rate associated with work correspond also to that output while entransy is loss coefficient suitable results the in larger conversion developed efficiency.It is found concept of entransy dissipation not always for analyses because it was for heat transfer.

PHOTOGRAMMETRY-BASED AUTOMATED MEASUREMENTS FOR TOOTH SHAPE AND OCCLUSION ANALYSIS

Directory of Open Access Journals (Sweden)

V. A. Knyaz

2016-06-01

Full Text Available Tooth measurements (odontometry are performed for various scientific and practical applications, including dentistry. Present-day techniques are being increasingly based on 3D model use that provides wider prospects in comparison to measurements on real objects: teeth or their plaster copies. The main advantages emerge through application of new measurement methods which provide the needed degree of non-invasiveness, precision, convenience and details. Tooth measurements have been always regarded as a time-consuming research, even more so with use of new methods due to their wider opportunities. This is where automation becomes essential for further development and implication of measurement techniques. In our research automation in obtaining 3D models and automation of measurements provided essential data that was analysed to suggest recommendations for tooth preparation – one of the most responsible clinical procedures in prosthetic dentistry – within a comparatively short period of time. The original photogrammetric 3D reconstruction system allows to generate 3D models of dental arches, reproduce their closure, or occlusion, and to perform a set of standard measurement in automated mode.

Photogrammetry-Based Automated Measurements for Tooth Shape and Occlusion Analysis

Science.gov (United States)

Knyaz, V. A.; Gaboutchian, A. V.

2016-06-01

Tooth measurements (odontometry) are performed for various scientific and practical applications, including dentistry. Present-day techniques are being increasingly based on 3D model use that provides wider prospects in comparison to measurements on real objects: teeth or their plaster copies. The main advantages emerge through application of new measurement methods which provide the needed degree of non-invasiveness, precision, convenience and details. Tooth measurements have been always regarded as a time-consuming research, even more so with use of new methods due to their wider opportunities. This is where automation becomes essential for further development and implication of measurement techniques. In our research automation in obtaining 3D models and automation of measurements provided essential data that was analysed to suggest recommendations for tooth preparation - one of the most responsible clinical procedures in prosthetic dentistry - within a comparatively short period of time. The original photogrammetric 3D reconstruction system allows to generate 3D models of dental arches, reproduce their closure, or occlusion, and to perform a set of standard measurement in automated mode.

Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system

International Nuclear Information System (INIS)

Abdullah, L; Jamaludin, Z; Rafan, N A; Jamaludin, J; Chiew, T H

2013-01-01

At present, positioning plants in machine tools are looking for high degree of accuracy and robustness attributes for the purpose of compensating various disturbance forces. The objective of this paper is to assess the tracking performance of Cascade P/PI, Nonlinear PID (NPID) and Nonlinear cascade (N-Cascade) controller with the existence of disturbance forces in the form of cutting forces. Cutting force characteristics at different cutting parameters; such as spindle speed rotations is analysed using Fast Fourier Transform. The tracking performance of a Nonlinear cascade controller in presence of these cutting forces is compared with NPID controller and Cascade P/PI controller. Robustness of these controllers in compensating different cutting characteristics is compared based on reduction in the amplitudes of cutting force harmonics using Fast Fourier Transform. It is found that the N-cascade controller performs better than both NPID controller and Cascade P/PI controller. The average percentage error reduction between N-cascade controller and Cascade P/PI controller is about 65% whereas the average percentage error reduction between cascade controller and NPID controller is about 82% at spindle speed of 3000 rpm spindle speed rotation. The finalized design of N-cascade controller could be utilized further for machining application such as milling process. The implementation of N-cascade in machine tools applications will increase the quality of the end product and the productivity in industry by saving the machining time. It is suggested that the range of the spindle speed could be made wider to accommodate the needs for high speed machining

Sampling and sensitivity analyses tools (SaSAT for computational modelling

Directory of Open Access Journals (Sweden)

Wilson David P

2008-02-01

Full Text Available Abstract SaSAT (Sampling and Sensitivity Analysis Tools is a user-friendly software package for applying uncertainty and sensitivity analyses to mathematical and computational models of arbitrary complexity and context. The toolbox is built in Matlab®, a numerical mathematical software package, and utilises algorithms contained in the Matlab® Statistics Toolbox. However, Matlab® is not required to use SaSAT as the software package is provided as an executable file with all the necessary supplementary files. The SaSAT package is also designed to work seamlessly with Microsoft Excel but no functionality is forfeited if that software is not available. A comprehensive suite of tools is provided to enable the following tasks to be easily performed: efficient and equitable sampling of parameter space by various methodologies; calculation of correlation coefficients; regression analysis; factor prioritisation; and graphical output of results, including response surfaces, tornado plots, and scatterplots. Use of SaSAT is exemplified by application to a simple epidemic model. To our knowledge, a number of the methods available in SaSAT for performing sensitivity analyses have not previously been used in epidemiological modelling and their usefulness in this context is demonstrated.

Surface analyses of TiC coated molybdenum limiter material exposed to high heat flux electron beam

International Nuclear Information System (INIS)

Onozuka, M.; Uchikawa, T.; Yamao, H.; Kawai, H.; Kousaku, A.; Nakamura, H.; Niikura, S.

1987-01-01

Observation and surface analyses of TiC coated molybdenum exposed to high heat flux have been performed to study thermal damage resistance of TiC coated molybdenum limiter material. High heat loads were provided by a 120 kW electron beam facility. SEM, AES and EPMA have been applied to the surface analyses

Basin Testing of Wave Energy Converters in Trondheim: Investigation of Mooring Loads and Implications for Wider Research